summaryrefslogtreecommitdiffstats
path: root/qemu/docs/rcu.txt
diff options
context:
space:
mode:
Diffstat (limited to 'qemu/docs/rcu.txt')
-rw-r--r--qemu/docs/rcu.txt390
1 files changed, 390 insertions, 0 deletions
diff --git a/qemu/docs/rcu.txt b/qemu/docs/rcu.txt
new file mode 100644
index 000000000..21ecb8106
--- /dev/null
+++ b/qemu/docs/rcu.txt
@@ -0,0 +1,390 @@
+Using RCU (Read-Copy-Update) for synchronization
+================================================
+
+Read-copy update (RCU) is a synchronization mechanism that is used to
+protect read-mostly data structures. RCU is very efficient and scalable
+on the read side (it is wait-free), and thus can make the read paths
+extremely fast.
+
+RCU supports concurrency between a single writer and multiple readers,
+thus it is not used alone. Typically, the write-side will use a lock to
+serialize multiple updates, but other approaches are possible (e.g.,
+restricting updates to a single task). In QEMU, when a lock is used,
+this will often be the "iothread mutex", also known as the "big QEMU
+lock" (BQL). Also, restricting updates to a single task is done in
+QEMU using the "bottom half" API.
+
+RCU is fundamentally a "wait-to-finish" mechanism. The read side marks
+sections of code with "critical sections", and the update side will wait
+for the execution of all *currently running* critical sections before
+proceeding, or before asynchronously executing a callback.
+
+The key point here is that only the currently running critical sections
+are waited for; critical sections that are started _after_ the beginning
+of the wait do not extend the wait, despite running concurrently with
+the updater. This is the reason why RCU is more scalable than,
+for example, reader-writer locks. It is so much more scalable that
+the system will have a single instance of the RCU mechanism; a single
+mechanism can be used for an arbitrary number of "things", without
+having to worry about things such as contention or deadlocks.
+
+How is this possible? The basic idea is to split updates in two phases,
+"removal" and "reclamation". During removal, we ensure that subsequent
+readers will not be able to get a reference to the old data. After
+removal has completed, a critical section will not be able to access
+the old data. Therefore, critical sections that begin after removal
+do not matter; as soon as all previous critical sections have finished,
+there cannot be any readers who hold references to the data structure,
+and these can now be safely reclaimed (e.g., freed or unref'ed).
+
+Here is a picutre:
+
+ thread 1 thread 2 thread 3
+ ------------------- ------------------------ -------------------
+ enter RCU crit.sec.
+ | finish removal phase
+ | begin wait
+ | | enter RCU crit.sec.
+ exit RCU crit.sec | |
+ complete wait |
+ begin reclamation phase |
+ exit RCU crit.sec.
+
+
+Note how thread 3 is still executing its critical section when thread 2
+starts reclaiming data. This is possible, because the old version of the
+data structure was not accessible at the time thread 3 began executing
+that critical section.
+
+
+RCU API
+=======
+
+The core RCU API is small:
+
+ void rcu_read_lock(void);
+
+ Used by a reader to inform the reclaimer that the reader is
+ entering an RCU read-side critical section.
+
+ void rcu_read_unlock(void);
+
+ Used by a reader to inform the reclaimer that the reader is
+ exiting an RCU read-side critical section. Note that RCU
+ read-side critical sections may be nested and/or overlapping.
+
+ void synchronize_rcu(void);
+
+ Blocks until all pre-existing RCU read-side critical sections
+ on all threads have completed. This marks the end of the removal
+ phase and the beginning of reclamation phase.
+
+ Note that it would be valid for another update to come while
+ synchronize_rcu is running. Because of this, it is better that
+ the updater releases any locks it may hold before calling
+ synchronize_rcu. If this is not possible (for example, because
+ the updater is protected by the BQL), you can use call_rcu.
+
+ void call_rcu1(struct rcu_head * head,
+ void (*func)(struct rcu_head *head));
+
+ This function invokes func(head) after all pre-existing RCU
+ read-side critical sections on all threads have completed. This
+ marks the end of the removal phase, with func taking care
+ asynchronously of the reclamation phase.
+
+ The foo struct needs to have an rcu_head structure added,
+ perhaps as follows:
+
+ struct foo {
+ struct rcu_head rcu;
+ int a;
+ char b;
+ long c;
+ };
+
+ so that the reclaimer function can fetch the struct foo address
+ and free it:
+
+ call_rcu1(&foo.rcu, foo_reclaim);
+
+ void foo_reclaim(struct rcu_head *rp)
+ {
+ struct foo *fp = container_of(rp, struct foo, rcu);
+ g_free(fp);
+ }
+
+ For the common case where the rcu_head member is the first of the
+ struct, you can use the following macro.
+
+ void call_rcu(T *p,
+ void (*func)(T *p),
+ field-name);
+ void g_free_rcu(T *p,
+ field-name);
+
+ call_rcu1 is typically used through these macro, in the common case
+ where the "struct rcu_head" is the first field in the struct. If
+ the callback function is g_free, in particular, g_free_rcu can be
+ used. In the above case, one could have written simply:
+
+ g_free_rcu(foo_reclaim, rcu);
+
+ typeof(*p) atomic_rcu_read(p);
+
+ atomic_rcu_read() is similar to atomic_mb_read(), but it makes
+ some assumptions on the code that calls it. This allows a more
+ optimized implementation.
+
+ atomic_rcu_read assumes that whenever a single RCU critical
+ section reads multiple shared data, these reads are either
+ data-dependent or need no ordering. This is almost always the
+ case when using RCU, because read-side critical sections typically
+ navigate one or more pointers (the pointers that are changed on
+ every update) until reaching a data structure of interest,
+ and then read from there.
+
+ RCU read-side critical sections must use atomic_rcu_read() to
+ read data, unless concurrent writes are presented by another
+ synchronization mechanism.
+
+ Furthermore, RCU read-side critical sections should traverse the
+ data structure in a single direction, opposite to the direction
+ in which the updater initializes it.
+
+ void atomic_rcu_set(p, typeof(*p) v);
+
+ atomic_rcu_set() is also similar to atomic_mb_set(), and it also
+ makes assumptions on the code that calls it in order to allow a more
+ optimized implementation.
+
+ In particular, atomic_rcu_set() suffices for synchronization
+ with readers, if the updater never mutates a field within a
+ data item that is already accessible to readers. This is the
+ case when initializing a new copy of the RCU-protected data
+ structure; just ensure that initialization of *p is carried out
+ before atomic_rcu_set() makes the data item visible to readers.
+ If this rule is observed, writes will happen in the opposite
+ order as reads in the RCU read-side critical sections (or if
+ there is just one update), and there will be no need for other
+ synchronization mechanism to coordinate the accesses.
+
+The following APIs must be used before RCU is used in a thread:
+
+ void rcu_register_thread(void);
+
+ Mark a thread as taking part in the RCU mechanism. Such a thread
+ will have to report quiescent points regularly, either manually
+ or through the QemuCond/QemuSemaphore/QemuEvent APIs.
+
+ void rcu_unregister_thread(void);
+
+ Mark a thread as not taking part anymore in the RCU mechanism.
+ It is not a problem if such a thread reports quiescent points,
+ either manually or by using the QemuCond/QemuSemaphore/QemuEvent
+ APIs.
+
+Note that these APIs are relatively heavyweight, and should _not_ be
+nested.
+
+
+DIFFERENCES WITH LINUX
+======================
+
+- Waiting on a mutex is possible, though discouraged, within an RCU critical
+ section. This is because spinlocks are rarely (if ever) used in userspace
+ programming; not allowing this would prevent upgrading an RCU read-side
+ critical section to become an updater.
+
+- atomic_rcu_read and atomic_rcu_set replace rcu_dereference and
+ rcu_assign_pointer. They take a _pointer_ to the variable being accessed.
+
+- call_rcu is a macro that has an extra argument (the name of the first
+ field in the struct, which must be a struct rcu_head), and expects the
+ type of the callback's argument to be the type of the first argument.
+ call_rcu1 is the same as Linux's call_rcu.
+
+
+RCU PATTERNS
+============
+
+Many patterns using read-writer locks translate directly to RCU, with
+the advantages of higher scalability and deadlock immunity.
+
+In general, RCU can be used whenever it is possible to create a new
+"version" of a data structure every time the updater runs. This may
+sound like a very strict restriction, however:
+
+- the updater does not mean "everything that writes to a data structure",
+ but rather "everything that involves a reclamation step". See the
+ array example below
+
+- in some cases, creating a new version of a data structure may actually
+ be very cheap. For example, modifying the "next" pointer of a singly
+ linked list is effectively creating a new version of the list.
+
+Here are some frequently-used RCU idioms that are worth noting.
+
+
+RCU list processing
+-------------------
+
+TBD (not yet used in QEMU)
+
+
+RCU reference counting
+----------------------
+
+Because grace periods are not allowed to complete while there is an RCU
+read-side critical section in progress, the RCU read-side primitives
+may be used as a restricted reference-counting mechanism. For example,
+consider the following code fragment:
+
+ rcu_read_lock();
+ p = atomic_rcu_read(&foo);
+ /* do something with p. */
+ rcu_read_unlock();
+
+The RCU read-side critical section ensures that the value of "p" remains
+valid until after the rcu_read_unlock(). In some sense, it is acquiring
+a reference to p that is later released when the critical section ends.
+The write side looks simply like this (with appropriate locking):
+
+ qemu_mutex_lock(&foo_mutex);
+ old = foo;
+ atomic_rcu_set(&foo, new);
+ qemu_mutex_unlock(&foo_mutex);
+ synchronize_rcu();
+ free(old);
+
+If the processing cannot be done purely within the critical section, it
+is possible to combine this idiom with a "real" reference count:
+
+ rcu_read_lock();
+ p = atomic_rcu_read(&foo);
+ foo_ref(p);
+ rcu_read_unlock();
+ /* do something with p. */
+ foo_unref(p);
+
+The write side can be like this:
+
+ qemu_mutex_lock(&foo_mutex);
+ old = foo;
+ atomic_rcu_set(&foo, new);
+ qemu_mutex_unlock(&foo_mutex);
+ synchronize_rcu();
+ foo_unref(old);
+
+or with call_rcu:
+
+ qemu_mutex_lock(&foo_mutex);
+ old = foo;
+ atomic_rcu_set(&foo, new);
+ qemu_mutex_unlock(&foo_mutex);
+ call_rcu(foo_unref, old, rcu);
+
+In both cases, the write side only performs removal. Reclamation
+happens when the last reference to a "foo" object is dropped.
+Using synchronize_rcu() is undesirably expensive, because the
+last reference may be dropped on the read side. Hence you can
+use call_rcu() instead:
+
+ foo_unref(struct foo *p) {
+ if (atomic_fetch_dec(&p->refcount) == 1) {
+ call_rcu(foo_destroy, p, rcu);
+ }
+ }
+
+
+Note that the same idioms would be possible with reader/writer
+locks:
+
+ read_lock(&foo_rwlock); write_mutex_lock(&foo_rwlock);
+ p = foo; p = foo;
+ /* do something with p. */ foo = new;
+ read_unlock(&foo_rwlock); free(p);
+ write_mutex_unlock(&foo_rwlock);
+ free(p);
+
+ ------------------------------------------------------------------
+
+ read_lock(&foo_rwlock); write_mutex_lock(&foo_rwlock);
+ p = foo; old = foo;
+ foo_ref(p); foo = new;
+ read_unlock(&foo_rwlock); foo_unref(old);
+ /* do something with p. */ write_mutex_unlock(&foo_rwlock);
+ read_lock(&foo_rwlock);
+ foo_unref(p);
+ read_unlock(&foo_rwlock);
+
+foo_unref could use a mechanism such as bottom halves to move deallocation
+out of the write-side critical section.
+
+
+RCU resizable arrays
+--------------------
+
+Resizable arrays can be used with RCU. The expensive RCU synchronization
+(or call_rcu) only needs to take place when the array is resized.
+The two items to take care of are:
+
+- ensuring that the old version of the array is available between removal
+ and reclamation;
+
+- avoiding mismatches in the read side between the array data and the
+ array size.
+
+The first problem is avoided simply by not using realloc. Instead,
+each resize will allocate a new array and copy the old data into it.
+The second problem would arise if the size and the data pointers were
+two members of a larger struct:
+
+ struct mystuff {
+ ...
+ int data_size;
+ int data_alloc;
+ T *data;
+ ...
+ };
+
+Instead, we store the size of the array with the array itself:
+
+ struct arr {
+ int size;
+ int alloc;
+ T data[];
+ };
+ struct arr *global_array;
+
+ read side:
+ rcu_read_lock();
+ struct arr *array = atomic_rcu_read(&global_array);
+ x = i < array->size ? array->data[i] : -1;
+ rcu_read_unlock();
+ return x;
+
+ write side (running under a lock):
+ if (global_array->size == global_array->alloc) {
+ /* Creating a new version. */
+ new_array = g_malloc(sizeof(struct arr) +
+ global_array->alloc * 2 * sizeof(T));
+ new_array->size = global_array->size;
+ new_array->alloc = global_array->alloc * 2;
+ memcpy(new_array->data, global_array->data,
+ global_array->alloc * sizeof(T));
+
+ /* Removal phase. */
+ old_array = global_array;
+ atomic_rcu_set(&new_array->data, new_array);
+ synchronize_rcu();
+
+ /* Reclamation phase. */
+ free(old_array);
+ }
+
+
+SOURCES
+=======
+
+* Documentation/RCU/ from the Linux kernel