diff options
Diffstat (limited to 'qemu/docs/pci_expander_bridge.txt')
| -rw-r--r-- | qemu/docs/pci_expander_bridge.txt | 58 |
1 files changed, 58 insertions, 0 deletions
diff --git a/qemu/docs/pci_expander_bridge.txt b/qemu/docs/pci_expander_bridge.txt new file mode 100644 index 000000000..d7913fb4a --- /dev/null +++ b/qemu/docs/pci_expander_bridge.txt @@ -0,0 +1,58 @@ +PCI EXPANDER BRIDGE (PXB) +========================= + +Description +=========== +PXB is a "light-weight" host bridge in the same PCI domain +as the main host bridge whose purpose is to enable +the main host bridge to support multiple PCI root buses. +It is implemented only for i440fx and can be placed only +on bus 0 (pci.0). + +As opposed to PCI-2-PCI bridge's secondary bus, PXB's bus +is a primary bus and can be associated with a NUMA node +(different from the main host bridge) allowing the guest OS +to recognize the proximity of a pass-through device to +other resources as RAM and CPUs. + +Usage +===== +A detailed command line would be: + +[qemu-bin + storage options] +-m 2G +-object memory-backend-ram,size=1024M,policy=bind,host-nodes=0,id=ram-node0 -numa node,nodeid=0,cpus=0,memdev=ram-node0 +-object memory-backend-ram,size=1024M,policy=bind,host-nodes=1,id=ram-node1 -numa node,nodeid=1,cpus=1,memdev=ram-node1 +-device pxb,id=bridge1,bus=pci.0,numa_node=1,bus_nr=4 -netdev user,id=nd-device e1000,bus=bridge1,addr=0x4,netdev=nd +-device pxb,id=bridge2,bus=pci.0,numa_node=0,bus_nr=8,bus=pci.0 -device e1000,bus=bridge2,addr=0x3 +-device pxb,id=bridge3,bus=pci.0,bus_nr=40,bus=pci.0 -drive if=none,id=drive0,file=[img] -device virtio-blk-pci,drive=drive0,scsi=off,bus=bridge3,addr=1 + +Here you have: + - 2 NUMA nodes for the guest, 0 and 1. (both mapped to the same NUMA node in host, but you can and should put it in different host NUMA nodes) + - a pxb host bridge attached to NUMA 1 with an e1000 behind it + - a pxb host bridge attached to NUMA 0 with an e1000 behind it + - a pxb host bridge not attached to any NUMA with a hard drive behind it. + +Limitations +=========== +Please observe that we specified the bus "pci.0" for the second and third pxb. +This is because when no bus is given, another pxb can be selected by QEMU as default bus, +however, PXBs can be placed only under the root bus. + +Implementation +============== +The PXB is composed by: +- HostBridge (TYPE_PXB_HOST) + The host bridge allows to register and query the PXB's rPCI root bus in QEMU. +- PXBDev(TYPE_PXB_DEVICE) + It is a regular PCI Device that resides on the piix host-bridge bus and its bus uses the same PCI domain. + However, the bus behind is exposed through ACPI as a primary PCI bus and starts a new PCI hierarchy. + The interrupts from devices behind the PXB are routed through this device the same as if it were a + PCI-2-PCI bridge. The _PRT follows the i440fx model. +- PCIBridgeDev(TYPE_PCI_BRIDGE_DEV) + Created automatically as part of init sequence. + When adding a device to PXB it is attached to the bridge for two reasons: + - Using the bridge will enable hotplug support + - All the devices behind the bridge will use bridge's IO/MEM windows compacting + the PCI address space. + |