summaryrefslogtreecommitdiffstats
path: root/qemu/docs/bitmaps.md
diff options
context:
space:
mode:
Diffstat (limited to 'qemu/docs/bitmaps.md')
-rw-r--r--qemu/docs/bitmaps.md163
1 files changed, 158 insertions, 5 deletions
diff --git a/qemu/docs/bitmaps.md b/qemu/docs/bitmaps.md
index fa87f077f..a2e8d5116 100644
--- a/qemu/docs/bitmaps.md
+++ b/qemu/docs/bitmaps.md
@@ -19,12 +19,20 @@ which is included at the end of this document.
* A dirty bitmap's name is unique to the node, but bitmaps attached to different
nodes can share the same name.
+* Dirty bitmaps created for internal use by QEMU may be anonymous and have no
+ name, but any user-created bitmaps may not be. There can be any number of
+ anonymous bitmaps per node.
+
+* The name of a user-created bitmap must not be empty ("").
+
## Bitmap Modes
* A Bitmap can be "frozen," which means that it is currently in-use by a backup
operation and cannot be deleted, renamed, written to, reset,
etc.
+* The normal operating mode for a bitmap is "active."
+
## Basic QMP Usage
### Supported Commands ###
@@ -97,11 +105,7 @@ which is included at the end of this document.
}
```
-## Transactions (Not yet implemented)
-
-* Transactional commands are forthcoming in a future version,
- and are not yet available for use. This section serves as
- documentation of intent for their design and usage.
+## Transactions
### Justification
@@ -323,6 +327,155 @@ full backup as a backing image.
"event": "BLOCK_JOB_COMPLETED" }
```
+### Partial Transactional Failures
+
+* Sometimes, a transaction will succeed in launching and return success,
+ but then later the backup jobs themselves may fail. It is possible that
+ a management application may have to deal with a partial backup failure
+ after a successful transaction.
+
+* If multiple backup jobs are specified in a single transaction, when one of
+ them fails, it will not interact with the other backup jobs in any way.
+
+* The job(s) that succeeded will clear the dirty bitmap associated with the
+ operation, but the job(s) that failed will not. It is not "safe" to delete
+ any incremental backups that were created successfully in this scenario,
+ even though others failed.
+
+#### Example
+
+* QMP example highlighting two backup jobs:
+
+ ```json
+ { "execute": "transaction",
+ "arguments": {
+ "actions": [
+ { "type": "drive-backup",
+ "data": { "device": "drive0", "bitmap": "bitmap0",
+ "format": "qcow2", "mode": "existing",
+ "sync": "incremental", "target": "d0-incr-1.qcow2" } },
+ { "type": "drive-backup",
+ "data": { "device": "drive1", "bitmap": "bitmap1",
+ "format": "qcow2", "mode": "existing",
+ "sync": "incremental", "target": "d1-incr-1.qcow2" } },
+ ]
+ }
+ }
+ ```
+
+* QMP example response, highlighting one success and one failure:
+ * Acknowledgement that the Transaction was accepted and jobs were launched:
+ ```json
+ { "return": {} }
+ ```
+
+ * Later, QEMU sends notice that the first job was completed:
+ ```json
+ { "timestamp": { "seconds": 1447192343, "microseconds": 615698 },
+ "data": { "device": "drive0", "type": "backup",
+ "speed": 0, "len": 67108864, "offset": 67108864 },
+ "event": "BLOCK_JOB_COMPLETED"
+ }
+ ```
+
+ * Later yet, QEMU sends notice that the second job has failed:
+ ```json
+ { "timestamp": { "seconds": 1447192399, "microseconds": 683015 },
+ "data": { "device": "drive1", "action": "report",
+ "operation": "read" },
+ "event": "BLOCK_JOB_ERROR" }
+ ```
+
+ ```json
+ { "timestamp": { "seconds": 1447192399, "microseconds": 685853 },
+ "data": { "speed": 0, "offset": 0, "len": 67108864,
+ "error": "Input/output error",
+ "device": "drive1", "type": "backup" },
+ "event": "BLOCK_JOB_COMPLETED" }
+
+* In the above example, "d0-incr-1.qcow2" is valid and must be kept,
+ but "d1-incr-1.qcow2" is invalid and should be deleted. If a VM-wide
+ incremental backup of all drives at a point-in-time is to be made,
+ new backups for both drives will need to be made, taking into account
+ that a new incremental backup for drive0 needs to be based on top of
+ "d0-incr-1.qcow2."
+
+### Grouped Completion Mode
+
+* While jobs launched by transactions normally complete or fail on their own,
+ it is possible to instruct them to complete or fail together as a group.
+
+* QMP transactions take an optional properties structure that can affect
+ the semantics of the transaction.
+
+* The "completion-mode" transaction property can be either "individual"
+ which is the default, legacy behavior described above, or "grouped,"
+ a new behavior detailed below.
+
+* Delayed Completion: In grouped completion mode, no jobs will report
+ success until all jobs are ready to report success.
+
+* Grouped failure: If any job fails in grouped completion mode, all remaining
+ jobs will be cancelled. Any incremental backups will restore their dirty
+ bitmap objects as if no backup command was ever issued.
+
+ * Regardless of if QEMU reports a particular incremental backup job as
+ CANCELLED or as an ERROR, the in-memory bitmap will be restored.
+
+#### Example
+
+* Here's the same example scenario from above with the new property:
+
+ ```json
+ { "execute": "transaction",
+ "arguments": {
+ "actions": [
+ { "type": "drive-backup",
+ "data": { "device": "drive0", "bitmap": "bitmap0",
+ "format": "qcow2", "mode": "existing",
+ "sync": "incremental", "target": "d0-incr-1.qcow2" } },
+ { "type": "drive-backup",
+ "data": { "device": "drive1", "bitmap": "bitmap1",
+ "format": "qcow2", "mode": "existing",
+ "sync": "incremental", "target": "d1-incr-1.qcow2" } },
+ ],
+ "properties": {
+ "completion-mode": "grouped"
+ }
+ }
+ }
+ ```
+
+* QMP example response, highlighting a failure for drive2:
+ * Acknowledgement that the Transaction was accepted and jobs were launched:
+ ```json
+ { "return": {} }
+ ```
+
+ * Later, QEMU sends notice that the second job has errored out,
+ but that the first job was also cancelled:
+ ```json
+ { "timestamp": { "seconds": 1447193702, "microseconds": 632377 },
+ "data": { "device": "drive1", "action": "report",
+ "operation": "read" },
+ "event": "BLOCK_JOB_ERROR" }
+ ```
+
+ ```json
+ { "timestamp": { "seconds": 1447193702, "microseconds": 640074 },
+ "data": { "speed": 0, "offset": 0, "len": 67108864,
+ "error": "Input/output error",
+ "device": "drive1", "type": "backup" },
+ "event": "BLOCK_JOB_COMPLETED" }
+ ```
+
+ ```json
+ { "timestamp": { "seconds": 1447193702, "microseconds": 640163 },
+ "data": { "device": "drive0", "type": "backup", "speed": 0,
+ "len": 67108864, "offset": 16777216 },
+ "event": "BLOCK_JOB_CANCELLED" }
+ ```
+
<!--
The FreeBSD Documentation License