summaryrefslogtreecommitdiffstats
path: root/kernel/tools/testing
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/tools/testing')
-rw-r--r--kernel/tools/testing/fault-injection/failcmd.sh219
-rwxr-xr-xkernel/tools/testing/ktest/compare-ktest-sample.pl32
-rw-r--r--kernel/tools/testing/ktest/examples/README32
-rw-r--r--kernel/tools/testing/ktest/examples/crosstests.conf254
-rw-r--r--kernel/tools/testing/ktest/examples/include/bisect.conf90
-rw-r--r--kernel/tools/testing/ktest/examples/include/defaults.conf157
-rw-r--r--kernel/tools/testing/ktest/examples/include/min-config.conf60
-rw-r--r--kernel/tools/testing/ktest/examples/include/patchcheck.conf111
-rw-r--r--kernel/tools/testing/ktest/examples/include/tests.conf74
-rw-r--r--kernel/tools/testing/ktest/examples/kvm.conf92
-rw-r--r--kernel/tools/testing/ktest/examples/snowball.conf53
-rw-r--r--kernel/tools/testing/ktest/examples/test.conf62
-rwxr-xr-xkernel/tools/testing/ktest/ktest.pl4387
-rw-r--r--kernel/tools/testing/ktest/sample.conf1288
-rw-r--r--kernel/tools/testing/selftests/Makefile95
-rw-r--r--kernel/tools/testing/selftests/breakpoints/Makefile24
-rw-r--r--kernel/tools/testing/selftests/breakpoints/breakpoint_test.c396
-rw-r--r--kernel/tools/testing/selftests/cpu-hotplug/Makefile10
-rwxr-xr-xkernel/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh269
-rw-r--r--kernel/tools/testing/selftests/efivarfs/Makefile13
-rw-r--r--kernel/tools/testing/selftests/efivarfs/create-read.c38
-rwxr-xr-xkernel/tools/testing/selftests/efivarfs/efivarfs.sh198
-rw-r--r--kernel/tools/testing/selftests/efivarfs/open-unlink.c63
-rw-r--r--kernel/tools/testing/selftests/exec/.gitignore9
-rw-r--r--kernel/tools/testing/selftests/exec/Makefile28
-rw-r--r--kernel/tools/testing/selftests/exec/execveat.c412
-rw-r--r--kernel/tools/testing/selftests/firmware/Makefile11
-rwxr-xr-xkernel/tools/testing/selftests/firmware/fw_filesystem.sh62
-rwxr-xr-xkernel/tools/testing/selftests/firmware/fw_userhelper.sh89
-rw-r--r--kernel/tools/testing/selftests/ftrace/Makefile8
-rw-r--r--kernel/tools/testing/selftests/ftrace/README82
-rwxr-xr-xkernel/tools/testing/selftests/ftrace/ftracetest270
-rw-r--r--kernel/tools/testing/selftests/ftrace/samples/fail.tc4
-rw-r--r--kernel/tools/testing/selftests/ftrace/samples/pass.tc3
-rw-r--r--kernel/tools/testing/selftests/ftrace/samples/unresolved.tc4
-rw-r--r--kernel/tools/testing/selftests/ftrace/samples/unsupported.tc3
-rw-r--r--kernel/tools/testing/selftests/ftrace/samples/untested.tc3
-rw-r--r--kernel/tools/testing/selftests/ftrace/samples/xfail.tc3
-rw-r--r--kernel/tools/testing/selftests/ftrace/test.d/00basic/basic1.tc3
-rw-r--r--kernel/tools/testing/selftests/ftrace/test.d/00basic/basic2.tc7
-rw-r--r--kernel/tools/testing/selftests/ftrace/test.d/00basic/basic3.tc8
-rw-r--r--kernel/tools/testing/selftests/ftrace/test.d/00basic/basic4.tc5
-rw-r--r--kernel/tools/testing/selftests/ftrace/test.d/event/event-enable.tc60
-rw-r--r--kernel/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc60
-rw-r--r--kernel/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc60
-rw-r--r--kernel/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc91
-rw-r--r--kernel/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc52
-rw-r--r--kernel/tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc80
-rw-r--r--kernel/tools/testing/selftests/ftrace/test.d/functions16
-rw-r--r--kernel/tools/testing/selftests/ftrace/test.d/kprobe/add_and_remove.tc12
-rw-r--r--kernel/tools/testing/selftests/ftrace/test.d/kprobe/busy_check.tc14
-rw-r--r--kernel/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args.tc17
-rw-r--r--kernel/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_ftrace.tc55
-rw-r--r--kernel/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc16
-rw-r--r--kernel/tools/testing/selftests/ftrace/test.d/template9
-rwxr-xr-xkernel/tools/testing/selftests/gen_kselftest_tar.sh55
-rw-r--r--kernel/tools/testing/selftests/ipc/Makefile22
-rw-r--r--kernel/tools/testing/selftests/ipc/msgque.c254
-rw-r--r--kernel/tools/testing/selftests/kcmp/.gitignore2
-rw-r--r--kernel/tools/testing/selftests/kcmp/Makefile10
-rw-r--r--kernel/tools/testing/selftests/kcmp/kcmp_test.c109
-rw-r--r--kernel/tools/testing/selftests/kselftest.h62
-rwxr-xr-xkernel/tools/testing/selftests/kselftest_install.sh37
-rw-r--r--kernel/tools/testing/selftests/lib.mk35
-rw-r--r--kernel/tools/testing/selftests/memfd/.gitignore4
-rw-r--r--kernel/tools/testing/selftests/memfd/Makefile22
-rw-r--r--kernel/tools/testing/selftests/memfd/fuse_mnt.c110
-rw-r--r--kernel/tools/testing/selftests/memfd/fuse_test.c311
-rw-r--r--kernel/tools/testing/selftests/memfd/memfd_test.c911
-rw-r--r--kernel/tools/testing/selftests/memfd/run_fuse_test.sh14
-rw-r--r--kernel/tools/testing/selftests/memory-hotplug/Makefile12
-rwxr-xr-xkernel/tools/testing/selftests/memory-hotplug/mem-on-off-test.sh238
-rw-r--r--kernel/tools/testing/selftests/mount/.gitignore1
-rw-r--r--kernel/tools/testing/selftests/mount/Makefile16
-rw-r--r--kernel/tools/testing/selftests/mount/unprivileged-remount-test.c370
-rw-r--r--kernel/tools/testing/selftests/mqueue/.gitignore2
-rw-r--r--kernel/tools/testing/selftests/mqueue/Makefile22
-rw-r--r--kernel/tools/testing/selftests/mqueue/mq_open_tests.c500
-rw-r--r--kernel/tools/testing/selftests/mqueue/mq_perf_tests.c742
-rw-r--r--kernel/tools/testing/selftests/net/.gitignore3
-rw-r--r--kernel/tools/testing/selftests/net/Makefile19
-rw-r--r--kernel/tools/testing/selftests/net/psock_fanout.c312
-rw-r--r--kernel/tools/testing/selftests/net/psock_lib.h127
-rw-r--r--kernel/tools/testing/selftests/net/psock_tpacket.c805
-rwxr-xr-xkernel/tools/testing/selftests/net/run_afpackettests26
-rwxr-xr-xkernel/tools/testing/selftests/net/run_netsocktests12
-rw-r--r--kernel/tools/testing/selftests/net/socket.c92
-rwxr-xr-xkernel/tools/testing/selftests/net/test_bpf.sh10
-rw-r--r--kernel/tools/testing/selftests/powerpc/Makefile53
-rw-r--r--kernel/tools/testing/selftests/powerpc/copyloops/.gitignore4
-rw-r--r--kernel/tools/testing/selftests/powerpc/copyloops/Makefile25
-rw-r--r--kernel/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h56
-rw-r--r--kernel/tools/testing/selftests/powerpc/copyloops/asm/processor.h0
l---------kernel/tools/testing/selftests/powerpc/copyloops/copyuser_64.S1
l---------kernel/tools/testing/selftests/powerpc/copyloops/copyuser_power7.S1
l---------kernel/tools/testing/selftests/powerpc/copyloops/memcpy_64.S1
l---------kernel/tools/testing/selftests/powerpc/copyloops/memcpy_power7.S1
-rw-r--r--kernel/tools/testing/selftests/powerpc/copyloops/validate.c99
-rw-r--r--kernel/tools/testing/selftests/powerpc/harness.c161
-rw-r--r--kernel/tools/testing/selftests/powerpc/mm/.gitignore3
-rw-r--r--kernel/tools/testing/selftests/powerpc/mm/Makefile16
-rw-r--r--kernel/tools/testing/selftests/powerpc/mm/hugetlb_vs_thp_test.c76
-rw-r--r--kernel/tools/testing/selftests/powerpc/mm/subpage_prot.c220
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/.gitignore3
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/Makefile42
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/count_instructions.c147
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/.gitignore22
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/Makefile30
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/back_to_back_ebbs_test.c106
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/busy_loop.S271
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/close_clears_pmcc_test.c59
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_pinned_vs_ebb_test.c93
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_vs_ebb_test.c89
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/cycles_test.c58
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_freeze_test.c117
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c91
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb.c478
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb.h77
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb_handler.S365
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_child_test.c86
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_willing_child_test.c92
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb_vs_cpu_event_test.c86
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/event_attributes_test.c131
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/fixed_instruction_loop.S43
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/fork_cleanup_test.c79
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/instruction_count_test.c164
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/lost_exception_test.c100
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/multi_counter_test.c91
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/multi_ebb_procs_test.c109
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c61
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/pmae_handling_test.c106
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c93
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/reg.h49
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test.c39
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/task_event_pinned_vs_ebb_test.c91
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/task_event_vs_ebb_test.c83
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/trace.c300
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/ebb/trace.h41
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/event.c131
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/event.h43
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/l3_bank_test.c48
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/lib.c253
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/lib.h41
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/loop.S43
-rw-r--r--kernel/tools/testing/selftests/powerpc/pmu/per_event_excludes.c114
-rw-r--r--kernel/tools/testing/selftests/powerpc/primitives/.gitignore1
-rw-r--r--kernel/tools/testing/selftests/powerpc/primitives/Makefile12
l---------kernel/tools/testing/selftests/powerpc/primitives/asm/asm-compat.h1
-rw-r--r--kernel/tools/testing/selftests/powerpc/primitives/asm/ppc-opcode.h0
-rw-r--r--kernel/tools/testing/selftests/powerpc/primitives/load_unaligned_zeropad.c147
l---------kernel/tools/testing/selftests/powerpc/primitives/word-at-a-time.h1
-rw-r--r--kernel/tools/testing/selftests/powerpc/stringloops/.gitignore1
-rw-r--r--kernel/tools/testing/selftests/powerpc/stringloops/Makefile15
-rw-r--r--kernel/tools/testing/selftests/powerpc/stringloops/asm/ppc_asm.h7
-rw-r--r--kernel/tools/testing/selftests/powerpc/stringloops/memcmp.c103
l---------kernel/tools/testing/selftests/powerpc/stringloops/memcmp_64.S1
-rw-r--r--kernel/tools/testing/selftests/powerpc/subunit.h52
-rw-r--r--kernel/tools/testing/selftests/powerpc/switch_endian/.gitignore2
-rw-r--r--kernel/tools/testing/selftests/powerpc/switch_endian/Makefile24
-rw-r--r--kernel/tools/testing/selftests/powerpc/switch_endian/check.S100
-rw-r--r--kernel/tools/testing/selftests/powerpc/switch_endian/common.h6
-rw-r--r--kernel/tools/testing/selftests/powerpc/switch_endian/switch_endian_test.S81
-rw-r--r--kernel/tools/testing/selftests/powerpc/tm/.gitignore2
-rw-r--r--kernel/tools/testing/selftests/powerpc/tm/Makefile13
-rw-r--r--kernel/tools/testing/selftests/powerpc/tm/tm-resched-dscr.c98
-rw-r--r--kernel/tools/testing/selftests/powerpc/tm/tm-syscall-asm.S27
-rw-r--r--kernel/tools/testing/selftests/powerpc/tm/tm-syscall.c121
-rw-r--r--kernel/tools/testing/selftests/powerpc/utils.h50
-rw-r--r--kernel/tools/testing/selftests/powerpc/vphn/.gitignore1
-rw-r--r--kernel/tools/testing/selftests/powerpc/vphn/Makefile15
-rw-r--r--kernel/tools/testing/selftests/powerpc/vphn/test-vphn.c410
l---------kernel/tools/testing/selftests/powerpc/vphn/vphn.c1
l---------kernel/tools/testing/selftests/powerpc/vphn/vphn.h1
-rw-r--r--kernel/tools/testing/selftests/ptrace/Makefile11
-rw-r--r--kernel/tools/testing/selftests/ptrace/peeksiginfo.c218
-rw-r--r--kernel/tools/testing/selftests/rcutorture/.gitignore6
-rwxr-xr-xkernel/tools/testing/selftests/rcutorture/bin/config2frag.sh25
-rwxr-xr-xkernel/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh45
-rwxr-xr-xkernel/tools/testing/selftests/rcutorture/bin/configcheck.sh54
-rwxr-xr-xkernel/tools/testing/selftests/rcutorture/bin/configinit.sh74
-rwxr-xr-xkernel/tools/testing/selftests/rcutorture/bin/cpus2use.sh41
-rw-r--r--kernel/tools/testing/selftests/rcutorture/bin/functions.sh243
-rwxr-xr-xkernel/tools/testing/selftests/rcutorture/bin/kvm-build.sh71
-rwxr-xr-xkernel/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh51
-rwxr-xr-xkernel/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh69
-rwxr-xr-xkernel/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh69
-rwxr-xr-xkernel/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh229
-rwxr-xr-xkernel/tools/testing/selftests/rcutorture/bin/kvm.sh406
-rwxr-xr-xkernel/tools/testing/selftests/rcutorture/bin/parse-build.sh62
-rwxr-xr-xkernel/tools/testing/selftests/rcutorture/bin/parse-console.sh44
-rwxr-xr-xkernel/tools/testing/selftests/rcutorture/bin/parse-torture.sh105
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/lock/BUSTED6
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/lock/BUSTED.boot1
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/lock/CFLIST4
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/lock/CFcommon2
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK016
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK026
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK02.boot1
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK036
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK03.boot1
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK046
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK04.boot1
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/lock/ver_functions.sh43
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/BUSTED7
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/BUSTED.boot1
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/CFLIST16
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/CFcommon3
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/SRCU-N7
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/SRCU-N.boot1
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/SRCU-P7
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/SRCU-P.boot1
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS019
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS01.boot1
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS025
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS02.boot1
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS0313
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS03.boot1
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TINY0112
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TINY0214
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TINY02.boot2
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE0118
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE01.boot1
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE0223
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE02-T23
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE0320
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE0422
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE04.boot1
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE0522
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE05.boot2
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE0623
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE06.boot3
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE0722
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE07.boot1
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE0825
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE08-T23
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE08.boot3
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE0918
-rw-r--r--kernel/tools/testing/selftests/rcutorture/configs/rcu/ver_functions.sh57
-rw-r--r--kernel/tools/testing/selftests/rcutorture/doc/TINY_RCU.txt40
-rw-r--r--kernel/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt93
-rw-r--r--kernel/tools/testing/selftests/rcutorture/doc/initrd.txt91
-rw-r--r--kernel/tools/testing/selftests/rcutorture/doc/rcu-test-image.txt42
-rw-r--r--kernel/tools/testing/selftests/size/.gitignore1
-rw-r--r--kernel/tools/testing/selftests/size/Makefile11
-rw-r--r--kernel/tools/testing/selftests/size/get_size.c100
-rw-r--r--kernel/tools/testing/selftests/sysctl/Makefile13
-rw-r--r--kernel/tools/testing/selftests/sysctl/common_tests109
-rwxr-xr-xkernel/tools/testing/selftests/sysctl/run_numerictests10
-rwxr-xr-xkernel/tools/testing/selftests/sysctl/run_stringtests77
-rw-r--r--kernel/tools/testing/selftests/timers/Makefile36
-rw-r--r--kernel/tools/testing/selftests/timers/alarmtimer-suspend.c185
-rw-r--r--kernel/tools/testing/selftests/timers/change_skew.c107
-rw-r--r--kernel/tools/testing/selftests/timers/clocksource-switch.c179
-rw-r--r--kernel/tools/testing/selftests/timers/inconsistency-check.c204
-rw-r--r--kernel/tools/testing/selftests/timers/leap-a-day.c319
-rw-r--r--kernel/tools/testing/selftests/timers/leapcrash.c120
-rw-r--r--kernel/tools/testing/selftests/timers/mqueue-lat.c124
-rw-r--r--kernel/tools/testing/selftests/timers/nanosleep.c174
-rw-r--r--kernel/tools/testing/selftests/timers/nsleep-lat.c190
-rw-r--r--kernel/tools/testing/selftests/timers/posix_timers.c222
-rw-r--r--kernel/tools/testing/selftests/timers/raw_skew.c154
-rw-r--r--kernel/tools/testing/selftests/timers/rtctest.c271
-rw-r--r--kernel/tools/testing/selftests/timers/set-2038.c144
-rw-r--r--kernel/tools/testing/selftests/timers/set-tai.c79
-rw-r--r--kernel/tools/testing/selftests/timers/set-timer-lat.c216
-rw-r--r--kernel/tools/testing/selftests/timers/skew_consistency.c89
-rw-r--r--kernel/tools/testing/selftests/timers/threadtest.c204
-rw-r--r--kernel/tools/testing/selftests/timers/valid-adjtimex.c202
-rw-r--r--kernel/tools/testing/selftests/user/Makefile8
-rwxr-xr-xkernel/tools/testing/selftests/user/test_user_copy.sh10
-rw-r--r--kernel/tools/testing/selftests/vm/.gitignore4
-rw-r--r--kernel/tools/testing/selftests/vm/Makefile17
-rw-r--r--kernel/tools/testing/selftests/vm/hugepage-mmap.c92
-rw-r--r--kernel/tools/testing/selftests/vm/hugepage-shm.c100
-rw-r--r--kernel/tools/testing/selftests/vm/hugetlbfstest.c86
-rw-r--r--kernel/tools/testing/selftests/vm/map_hugetlb.c83
-rwxr-xr-xkernel/tools/testing/selftests/vm/run_vmtests93
-rw-r--r--kernel/tools/testing/selftests/vm/thuge-gen.c254
-rw-r--r--kernel/tools/testing/selftests/vm/transhuge-stress.c144
-rw-r--r--kernel/tools/testing/selftests/x86/.gitignore2
-rw-r--r--kernel/tools/testing/selftests/x86/Makefile59
-rwxr-xr-xkernel/tools/testing/selftests/x86/check_cc.sh16
-rw-r--r--kernel/tools/testing/selftests/x86/entry_from_vm86.c114
-rw-r--r--kernel/tools/testing/selftests/x86/sigreturn.c684
-rw-r--r--kernel/tools/testing/selftests/x86/single_step_syscall.c181
-rw-r--r--kernel/tools/testing/selftests/x86/trivial_32bit_program.c18
-rw-r--r--kernel/tools/testing/selftests/x86/trivial_64bit_program.c18
287 files changed, 29518 insertions, 0 deletions
diff --git a/kernel/tools/testing/fault-injection/failcmd.sh b/kernel/tools/testing/fault-injection/failcmd.sh
new file mode 100644
index 000000000..78a9ed7fe
--- /dev/null
+++ b/kernel/tools/testing/fault-injection/failcmd.sh
@@ -0,0 +1,219 @@
+#!/bin/bash
+#
+# NAME
+# failcmd.sh - run a command with injecting slab/page allocation failures
+#
+# SYNOPSIS
+# failcmd.sh --help
+# failcmd.sh [<options>] command [arguments]
+#
+# DESCRIPTION
+# Run command with injecting slab/page allocation failures by fault
+# injection.
+#
+# NOTE: you need to run this script as root.
+#
+
+usage()
+{
+ cat >&2 <<EOF
+Usage: $0 [options] command [arguments]
+
+OPTIONS
+ -p percent
+ --probability=percent
+ likelihood of failure injection, in percent.
+ Default value is 1
+
+ -t value
+ --times=value
+ specifies how many times failures may happen at most.
+ Default value is 1
+
+ --oom-kill-allocating-task=value
+ set /proc/sys/vm/oom_kill_allocating_task to specified value
+ before running the command.
+ Default value is 1
+
+ -h, --help
+ Display a usage message and exit
+
+ --interval=value, --space=value, --verbose=value, --task-filter=value,
+ --stacktrace-depth=value, --require-start=value, --require-end=value,
+ --reject-start=value, --reject-end=value, --ignore-gfp-wait=value
+ See Documentation/fault-injection/fault-injection.txt for more
+ information
+
+ failslab options:
+ --cache-filter=value
+
+ fail_page_alloc options:
+ --ignore-gfp-highmem=value, --min-order=value
+
+ENVIRONMENT
+ FAILCMD_TYPE
+ The following values for FAILCMD_TYPE are recognized:
+
+ failslab
+ inject slab allocation failures
+ fail_page_alloc
+ inject page allocation failures
+
+ If FAILCMD_TYPE is not defined, then failslab is used.
+EOF
+}
+
+if [ $UID != 0 ]; then
+ echo must be run as root >&2
+ exit 1
+fi
+
+DEBUGFS=`mount -t debugfs | head -1 | awk '{ print $3}'`
+
+if [ ! -d "$DEBUGFS" ]; then
+ echo debugfs is not mounted >&2
+ exit 1
+fi
+
+FAILCMD_TYPE=${FAILCMD_TYPE:-failslab}
+FAULTATTR=$DEBUGFS/$FAILCMD_TYPE
+
+if [ ! -d $FAULTATTR ]; then
+ echo $FAILCMD_TYPE is not available >&2
+ exit 1
+fi
+
+LONGOPTS=probability:,interval:,times:,space:,verbose:,task-filter:
+LONGOPTS=$LONGOPTS,stacktrace-depth:,require-start:,require-end:
+LONGOPTS=$LONGOPTS,reject-start:,reject-end:,oom-kill-allocating-task:,help
+
+if [ $FAILCMD_TYPE = failslab ]; then
+ LONGOPTS=$LONGOPTS,ignore-gfp-wait:,cache-filter:
+elif [ $FAILCMD_TYPE = fail_page_alloc ]; then
+ LONGOPTS=$LONGOPTS,ignore-gfp-wait:,ignore-gfp-highmem:,min-order:
+fi
+
+TEMP=`getopt -o p:i:t:s:v:h --long $LONGOPTS -n 'failcmd.sh' -- "$@"`
+
+if [ $? != 0 ]; then
+ usage
+ exit 1
+fi
+
+eval set -- "$TEMP"
+
+fault_attr_default()
+{
+ echo N > $FAULTATTR/task-filter
+ echo 0 > $FAULTATTR/probability
+ echo 1 > $FAULTATTR/times
+}
+
+fault_attr_default
+
+oom_kill_allocating_task_saved=`cat /proc/sys/vm/oom_kill_allocating_task`
+
+restore_values()
+{
+ fault_attr_default
+ echo $oom_kill_allocating_task_saved \
+ > /proc/sys/vm/oom_kill_allocating_task
+}
+
+#
+# Default options
+#
+declare -i oom_kill_allocating_task=1
+declare task_filter=Y
+declare -i probability=1
+declare -i times=1
+
+while true; do
+ case "$1" in
+ -p|--probability)
+ probability=$2
+ shift 2
+ ;;
+ -i|--interval)
+ echo $2 > $FAULTATTR/interval
+ shift 2
+ ;;
+ -t|--times)
+ times=$2
+ shift 2
+ ;;
+ -s|--space)
+ echo $2 > $FAULTATTR/space
+ shift 2
+ ;;
+ -v|--verbose)
+ echo $2 > $FAULTATTR/verbose
+ shift 2
+ ;;
+ --task-filter)
+ task_filter=$2
+ shift 2
+ ;;
+ --stacktrace-depth)
+ echo $2 > $FAULTATTR/stacktrace-depth
+ shift 2
+ ;;
+ --require-start)
+ echo $2 > $FAULTATTR/require-start
+ shift 2
+ ;;
+ --require-end)
+ echo $2 > $FAULTATTR/require-end
+ shift 2
+ ;;
+ --reject-start)
+ echo $2 > $FAULTATTR/reject-start
+ shift 2
+ ;;
+ --reject-end)
+ echo $2 > $FAULTATTR/reject-end
+ shift 2
+ ;;
+ --oom-kill-allocating-task)
+ oom_kill_allocating_task=$2
+ shift 2
+ ;;
+ --ignore-gfp-wait)
+ echo $2 > $FAULTATTR/ignore-gfp-wait
+ shift 2
+ ;;
+ --cache-filter)
+ echo $2 > $FAULTATTR/cache_filter
+ shift 2
+ ;;
+ --ignore-gfp-highmem)
+ echo $2 > $FAULTATTR/ignore-gfp-highmem
+ shift 2
+ ;;
+ --min-order)
+ echo $2 > $FAULTATTR/min-order
+ shift 2
+ ;;
+ -h|--help)
+ usage
+ exit 0
+ shift
+ ;;
+ --)
+ shift
+ break
+ ;;
+ esac
+done
+
+[ -z "$1" ] && exit 0
+
+echo $oom_kill_allocating_task > /proc/sys/vm/oom_kill_allocating_task
+echo $task_filter > $FAULTATTR/task-filter
+echo $probability > $FAULTATTR/probability
+echo $times > $FAULTATTR/times
+
+trap "restore_values" SIGINT SIGTERM EXIT
+
+cmd="echo 1 > /proc/self/make-it-fail && exec $@"
+bash -c "$cmd"
diff --git a/kernel/tools/testing/ktest/compare-ktest-sample.pl b/kernel/tools/testing/ktest/compare-ktest-sample.pl
new file mode 100755
index 000000000..a373a5bff
--- /dev/null
+++ b/kernel/tools/testing/ktest/compare-ktest-sample.pl
@@ -0,0 +1,32 @@
+#!/usr/bin/perl
+
+open (IN,"ktest.pl");
+while (<IN>) {
+ # hashes are now used
+ if (/\$opt\{"?([A-Z].*?)(\[.*\])?"?\}/ ||
+ /^\s*"?([A-Z].*?)"?\s*=>\s*/ ||
+ /set_test_option\("(.*?)"/) {
+ $opt{$1} = 1;
+ }
+}
+close IN;
+
+open (IN, "sample.conf");
+while (<IN>) {
+ if (/^\s*#?\s*([A-Z]\S*)\s*=/) {
+ $samp{$1} = 1;
+ }
+}
+close IN;
+
+foreach $opt (keys %opt) {
+ if (!defined($samp{$opt})) {
+ print "opt = $opt\n";
+ }
+}
+
+foreach $samp (keys %samp) {
+ if (!defined($opt{$samp})) {
+ print "samp = $samp\n";
+ }
+}
diff --git a/kernel/tools/testing/ktest/examples/README b/kernel/tools/testing/ktest/examples/README
new file mode 100644
index 000000000..a12d295a0
--- /dev/null
+++ b/kernel/tools/testing/ktest/examples/README
@@ -0,0 +1,32 @@
+This directory contains example configs to use ktest for various tasks.
+The configs still need to be customized for your environment, but it
+is broken up by task which makes it easier to understand how to set up
+ktest.
+
+The configs are based off of real working configs but have been modified
+and commented to show more generic use cases that are more helpful for
+developers.
+
+crosstests.conf - this config shows an example of testing a git repo against
+ lots of different architectures. It only does build tests, but makes
+ it easy to compile test different archs. You can download the arch
+ cross compilers from:
+ http://kernel.org/pub/tools/crosstool/files/bin/x86_64/
+
+test.conf - A generic example of a config. This is based on an actual config
+ used to perform real testing.
+
+kvm.conf - A example of a config that is used to test a virtual guest running
+ on a host.
+
+snowball.conf - An example config that was used to demo ktest.pl against
+ a snowball ARM board.
+
+include/ - The include directory holds default configs that can be
+ included into other configs. This is a real use example that shows how
+ to reuse configs for various machines or set ups. The files here
+ are included by other config files, where the other config files define
+ options and variables that will make the included config work for the
+ given environment.
+
+
diff --git a/kernel/tools/testing/ktest/examples/crosstests.conf b/kernel/tools/testing/ktest/examples/crosstests.conf
new file mode 100644
index 000000000..a1203148d
--- /dev/null
+++ b/kernel/tools/testing/ktest/examples/crosstests.conf
@@ -0,0 +1,254 @@
+#
+# Example config for cross compiling
+#
+# In this config, it is expected that the tool chains from:
+#
+# http://kernel.org/pub/tools/crosstool/files/bin/x86_64/
+#
+# running on a x86_64 system have been downloaded and installed into:
+#
+# /usr/local/
+#
+# such that the compiler binaries are something like:
+#
+# /usr/local/gcc-4.5.2-nolibc/mips-linux/bin/mips-linux-gcc
+#
+# Some of the archs will use gcc-4.5.1 instead of gcc-4.5.2
+# this config uses variables to differentiate them.
+#
+# Comments describe some of the options, but full descriptions of
+# options are described in the samples.conf file.
+
+# ${PWD} is defined by ktest.pl to be the directory that the user
+# was in when they executed ktest.pl. It may be better to hardcode the
+# path name here. THIS_DIR is the variable used through out the config file
+# in case you want to change it.
+
+THIS_DIR := ${PWD}
+
+# Update the BUILD_DIR option to the location of your git repo you want to test.
+BUILD_DIR = ${THIS_DIR}/linux.git
+
+# The build will go into this directory. It will be created when you run the test.
+OUTPUT_DIR = ${THIS_DIR}/cross-compile
+
+# The build will be compiled with -j8
+BUILD_OPTIONS = -j8
+
+# The test will not stop when it hits a failure.
+DIE_ON_FAILURE = 0
+
+# If you want to have ktest.pl store the failure somewhere, uncomment this option
+# and change the directory where ktest should store the failures.
+#STORE_FAILURES = ${THIS_DIR}/failures
+
+# The log file is stored in the OUTPUT_DIR called cross.log
+# If you enable this, you need to create the OUTPUT_DIR. It wont be created for you.
+LOG_FILE = ${OUTPUT_DIR}/cross.log
+
+# The log file will be cleared each time you run ktest.
+CLEAR_LOG = 1
+
+# As some archs do not build with the defconfig, they have been marked
+# to be ignored. If you want to test them anyway, change DO_FAILED to 1.
+# If a test that has been marked as DO_FAILED passes, then you should change
+# that test to be DO_DEFAULT
+
+DO_FAILED := 0
+DO_DEFAULT := 1
+
+# By setting both DO_FAILED and DO_DEFAULT to zero, you can pick a single
+# arch that you want to test. (uncomment RUN and chose your arch)
+#RUN := m32r
+
+# At the bottom of the config file exists a bisect test. You can update that
+# test and set DO_FAILED and DO_DEFAULT to zero, and uncomment this variable
+# to run the bisect on the arch.
+#RUN := bisect
+
+# By default all tests will be running gcc 4.5.2. Some tests are using 4.5.1
+# and they select that in the test.
+# Note: GCC_VER is declared as on option and not a variable ('=' instead of ':=')
+# This is important. A variable is used only in the config file and if it is set
+# it stays that way for the rest of the config file until it is change again.
+# Here we want GCC_VER to remain persistent and change for each test, as it is used in
+# the MAKE_CMD. By using '=' instead of ':=' we achieve our goal.
+
+GCC_VER = 4.5.2
+MAKE_CMD = PATH=/usr/local/gcc-${GCC_VER}-nolibc/${CROSS}/bin:$PATH CROSS_COMPILE=${CROSS}- make ARCH=${ARCH}
+
+# all tests are only doing builds.
+TEST_TYPE = build
+
+# If you want to add configs on top of the defconfig, you can add those configs into
+# the add-config file and uncomment this option. This is useful if you want to test
+# all cross compiles with PREEMPT set, or TRACING on, etc.
+#ADD_CONFIG = ${THIS_DIR}/add-config
+
+# All tests are using defconfig
+BUILD_TYPE = defconfig
+
+# The test names will have the arch and cross compiler used. This will be shown in
+# the results.
+TEST_NAME = ${ARCH} ${CROSS}
+
+# alpha
+TEST_START IF ${RUN} == alpha || ${DO_DEFAULT}
+# Notice that CROSS and ARCH are also options and not variables (again '=' instead
+# of ':='). This is because TEST_NAME and MAKE_CMD wil use them for each test.
+# Only options are available during runs. Variables are only present in parsing the
+# config file.
+CROSS = alpha-linux
+ARCH = alpha
+
+# arm
+TEST_START IF ${RUN} == arm || ${DO_DEFAULT}
+CROSS = arm-unknown-linux-gnueabi
+ARCH = arm
+
+# black fin
+TEST_START IF ${RUN} == bfin || ${DO_DEFAULT}
+CROSS = bfin-uclinux
+ARCH = blackfin
+BUILD_OPTIONS = -j8 vmlinux
+
+# cris - FAILS?
+TEST_START IF ${RUN} == cris || ${RUN} == cris64 || ${DO_FAILED}
+CROSS = cris-linux
+ARCH = cris
+
+# cris32 - not right arch?
+TEST_START IF ${RUN} == cris || ${RUN} == cris32 || ${DO_FAILED}
+CROSS = crisv32-linux
+ARCH = cris
+
+# ia64
+TEST_START IF ${RUN} == ia64 || ${DO_DEFAULT}
+CROSS = ia64-linux
+ARCH = ia64
+
+# frv
+TEST_START IF ${RUN} == frv || ${DO_FAILED}
+CROSS = frv-linux
+ARCH = frv
+GCC_VER = 4.5.1
+
+# m68k fails with error?
+TEST_START IF ${RUN} == m68k || ${DO_DEFAULT}
+CROSS = m68k-linux
+ARCH = m68k
+
+# mips64
+TEST_START IF ${RUN} == mips || ${RUN} == mips64 || ${DO_DEFAULT}
+CROSS = mips64-linux
+ARCH = mips
+
+# mips32
+TEST_START IF ${RUN} == mips || ${RUN} == mips32 || ${DO_DEFAULT}
+CROSS = mips-linux
+ARCH = mips
+
+# m32r
+TEST_START IF ${RUN} == m32r || ${DO_FAILED}
+CROSS = m32r-linux
+ARCH = m32r
+GCC_VER = 4.5.1
+BUILD_OPTIONS = -j8 vmlinux
+
+# parisc64 failed?
+TEST_START IF ${RUN} == hppa || ${RUN} == hppa64 || ${DO_FAILED}
+CROSS = hppa64-linux
+ARCH = parisc
+
+# parisc
+TEST_START IF ${RUN} == hppa || ${RUN} == hppa32 || ${DO_FAILED}
+CROSS = hppa-linux
+ARCH = parisc
+
+# ppc
+TEST_START IF ${RUN} == ppc || ${RUN} == ppc32 || ${DO_DEFAULT}
+CROSS = powerpc-linux
+ARCH = powerpc
+
+# ppc64
+TEST_START IF ${RUN} == ppc || ${RUN} == ppc64 || ${DO_DEFAULT}
+CROSS = powerpc64-linux
+ARCH = powerpc
+
+# s390
+TEST_START IF ${RUN} == s390 || ${DO_DEFAULT}
+CROSS = s390x-linux
+ARCH = s390
+
+# sh
+TEST_START IF ${RUN} == sh || ${DO_DEFAULT}
+CROSS = sh4-linux
+ARCH = sh
+
+# sparc64
+TEST_START IF ${RUN} == sparc || ${RUN} == sparc64 || ${DO_DEFAULT}
+CROSS = sparc64-linux
+ARCH = sparc64
+
+# sparc
+TEST_START IF ${RUN} == sparc || ${RUN} == sparc32 || ${DO_DEFAULT}
+CROSS = sparc-linux
+ARCH = sparc
+
+# xtensa failed
+TEST_START IF ${RUN} == xtensa || ${DO_FAILED}
+CROSS = xtensa-linux
+ARCH = xtensa
+
+# UML
+TEST_START IF ${RUN} == uml || ${DO_DEFAULT}
+MAKE_CMD = make ARCH=um SUBARCH=x86_64
+ARCH = uml
+CROSS =
+
+TEST_START IF ${RUN} == x86 || ${RUN} == i386 || ${DO_DEFAULT}
+MAKE_CMD = make ARCH=i386
+ARCH = i386
+CROSS =
+
+TEST_START IF ${RUN} == x86 || ${RUN} == x86_64 || ${DO_DEFAULT}
+MAKE_CMD = make ARCH=x86_64
+ARCH = x86_64
+CROSS =
+
+#################################
+
+# This is a bisect if needed. You need to give it a MIN_CONFIG that
+# will be the config file it uses. Basically, just copy the created defconfig
+# for the arch someplace and point MIN_CONFIG to it.
+TEST_START IF ${RUN} == bisect
+MIN_CONFIG = ${THIS_DIR}/min-config
+CROSS = s390x-linux
+ARCH = s390
+TEST_TYPE = bisect
+BISECT_TYPE = build
+BISECT_GOOD = v3.1
+BISECT_BAD = v3.2
+CHECKOUT = v3.2
+
+#################################
+
+# These defaults are needed to keep ktest.pl from complaining. They are
+# ignored because the test does not go pass the build. No install or
+# booting of the target images.
+
+DEFAULTS
+MACHINE = crosstest
+SSH_USER = root
+BUILD_TARGET = cross
+TARGET_IMAGE = image
+POWER_CYCLE = cycle
+CONSOLE = console
+LOCALVERSION = version
+GRUB_MENU = grub
+
+REBOOT_ON_ERROR = 0
+POWEROFF_ON_ERROR = 0
+POWEROFF_ON_SUCCESS = 0
+REBOOT_ON_SUCCESS = 0
+
diff --git a/kernel/tools/testing/ktest/examples/include/bisect.conf b/kernel/tools/testing/ktest/examples/include/bisect.conf
new file mode 100644
index 000000000..009bea65b
--- /dev/null
+++ b/kernel/tools/testing/ktest/examples/include/bisect.conf
@@ -0,0 +1,90 @@
+#
+# This example shows the bisect tests (git bisect and config bisect)
+#
+
+
+# The config that includes this file may define a RUN_TEST
+# variable that will tell this config what test to run.
+# (what to set the TEST option to).
+#
+DEFAULTS IF NOT DEFINED RUN_TEST
+# Requires that hackbench is in the PATH
+RUN_TEST := ${SSH} hackbench 50
+
+
+# Set TEST to 'bisect' to do a normal git bisect. You need
+# to modify the options below to make it bisect the exact
+# commits you are interested in.
+#
+TEST_START IF ${TEST} == bisect
+TEST_TYPE = bisect
+# You must set the commit that was considered good (git bisect good)
+BISECT_GOOD = v3.3
+# You must set the commit that was considered bad (git bisect bad)
+BISECT_BAD = HEAD
+# It's best to specify the branch to checkout before starting the bisect.
+CHECKOUT = origin/master
+# This can be build, boot, or test. Here we are doing a bisect
+# that requires to run a test to know if the bisect was good or bad.
+# The test should exit with 0 on good, non-zero for bad. But see
+# the BISECT_RET_* options in samples.conf to override this.
+BISECT_TYPE = test
+TEST = ${RUN_TEST}
+# It is usually a good idea to confirm that the GOOD and the BAD
+# commits are truly good and bad respectively. Having BISECT_CHECK
+# set to 1 will check both that the good commit works and the bad
+# commit fails. If you only want to check one or the other,
+# set BISECT_CHECK to 'good' or to 'bad'.
+BISECT_CHECK = 1
+#BISECT_CHECK = good
+#BISECT_CHECK = bad
+
+# Usually it's a good idea to specify the exact config you
+# want to use throughout the entire bisect. Here we placed
+# it in the directory we called ktest.pl from and named it
+# 'config-bisect'.
+MIN_CONFIG = ${THIS_DIR}/config-bisect
+# By default, if we are doing a BISECT_TYPE = test run but the
+# build or boot fails, ktest.pl will do a 'git bisect skip'.
+# Uncomment the below option to make ktest stop testing on such
+# an error.
+#BISECT_SKIP = 0
+# Now if you had BISECT_SKIP = 0 and the test fails, you can
+# examine what happened and then do 'git bisect log > /tmp/replay'
+# Set BISECT_REPLAY to /tmp/replay and ktest.pl will run the
+# 'git bisect replay /tmp/replay' before continuing the bisect test.
+#BISECT_REPLAY = /tmp/replay
+# If you used BISECT_REPLAY after the bisect test failed, you may
+# not want to continue the bisect on that commit that failed.
+# By setting BISECT_START to a new commit. ktest.pl will checkout
+# that commit after it has performed the 'git bisect replay' but
+# before it continues running the bisect test.
+#BISECT_START = 2545eb6198e7e1ec50daa0cfc64a4cdfecf24ec9
+
+# Now if you don't trust ktest.pl to make the decisions for you, then
+# set BISECT_MANUAL to 1. This will cause ktest.pl not to decide
+# if the commit was good or bad. Instead, it will ask you to tell
+# it if the current commit was good. In the mean time, you could
+# take the result, load it on any machine you want. Run several tests,
+# or whatever you feel like. Then, when you are happy, you can tell
+# ktest if you think it was good or not and ktest.pl will continue
+# the git bisect. You can even change what commit it is currently at.
+#BISECT_MANUAL = 1
+
+
+# One of the unique tests that ktest does is the config bisect.
+# Currently (which hopefully will be fixed soon), the bad config
+# must be a superset of the good config. This is because it only
+# searches for a config that causes the target to fail. If the
+# good config is not a subset of the bad config, or if the target
+# fails because of a lack of a config, then it will not find
+# the config for you.
+TEST_START IF ${TEST} == config-bisect
+TEST_TYPE = config_bisect
+# set to build, boot, test
+CONFIG_BISECT_TYPE = boot
+# Set the config that is considered bad.
+CONFIG_BISECT = ${THIS_DIR}/config-bad
+# This config is optional. By default it uses the
+# MIN_CONFIG as the good config.
+CONFIG_BISECT_GOOD = ${THIS_DIR}/config-good
diff --git a/kernel/tools/testing/ktest/examples/include/defaults.conf b/kernel/tools/testing/ktest/examples/include/defaults.conf
new file mode 100644
index 000000000..63a1a83f4
--- /dev/null
+++ b/kernel/tools/testing/ktest/examples/include/defaults.conf
@@ -0,0 +1,157 @@
+# This file holds defaults for most the tests. It defines the options that
+# are most common to tests that are likely to be shared.
+#
+# Note, after including this file, a config file may override any option
+# with a DEFAULTS OVERRIDE section.
+#
+
+# For those cases that use the same machine to boot a 64 bit
+# and a 32 bit version. The MACHINE is the DNS name to get to the
+# box (usually different if it was 64 bit or 32 bit) but the
+# BOX here is defined as a variable that will be the name of the box
+# itself. It is useful for calling scripts that will power cycle
+# the box, as only one script needs to be created to power cycle
+# even though the box itself has multiple operating systems on it.
+# By default, BOX and MACHINE are the same.
+
+DEFAULTS IF NOT DEFINED BOX
+BOX := ${MACHINE}
+
+
+# Consider each box as 64 bit box, unless the config including this file
+# has defined BITS = 32
+
+DEFAULTS IF NOT DEFINED BITS
+BITS := 64
+
+
+DEFAULTS
+
+# THIS_DIR is used through out the configs and defaults to ${PWD} which
+# is the directory that ktest.pl was called from.
+
+THIS_DIR := ${PWD}
+
+
+# to organize your configs, having each machine save their configs
+# into a separate directly is useful.
+CONFIG_DIR := ${THIS_DIR}/configs/${MACHINE}
+
+# Reset the log before running each test.
+CLEAR_LOG = 1
+
+# As installing kernels usually requires root privilege, default the
+# user on the target as root. It is also required that the target
+# allows ssh to root from the host without asking for a password.
+
+SSH_USER = root
+
+# For accesing the machine, we will ssh to root@machine.
+SSH := ssh ${SSH_USER}@${MACHINE}
+
+# Update this. The default here is ktest will ssh to the target box
+# and run a script called 'run-test' located on that box.
+TEST = ${SSH} run-test
+
+# Point build dir to the git repo you use
+BUILD_DIR = ${THIS_DIR}/linux.git
+
+# Each machine will have its own output build directory.
+OUTPUT_DIR = ${THIS_DIR}/build/${MACHINE}
+
+# Yes this config is focused on x86 (but ktest works for other archs too)
+BUILD_TARGET = arch/x86/boot/bzImage
+TARGET_IMAGE = /boot/vmlinuz-test
+
+# have directory for the scripts to reboot and power cycle the boxes
+SCRIPTS_DIR := ${THIS_DIR}/scripts
+
+# You can have each box/machine have a script to power cycle it.
+# Name your script <box>-cycle.
+POWER_CYCLE = ${SCRIPTS_DIR}/${BOX}-cycle
+
+# This script is used to power off the box.
+POWER_OFF = ${SCRIPTS_DIR}/${BOX}-poweroff
+
+# Keep your test kernels separate from your other kernels.
+LOCALVERSION = -test
+
+# The /boot/grub/menu.lst is searched for the line:
+# title Test Kernel
+# and ktest will use that kernel to reboot into.
+# For grub2 or other boot loaders, you need to set BOOT_TYPE
+# to 'script' and define other ways to load the kernel.
+# See snowball.conf example.
+#
+GRUB_MENU = Test Kernel
+
+# The kernel build will use this option.
+BUILD_OPTIONS = -j8
+
+# Keeping the log file with the output dir is convenient.
+LOG_FILE = ${OUTPUT_DIR}/${MACHINE}.log
+
+# Each box should have their own minum configuration
+# See min-config.conf
+MIN_CONFIG = ${CONFIG_DIR}/config-min
+
+# For things like randconfigs, there may be configs you find that
+# are already broken, or there may be some configs that you always
+# want set. Uncomment ADD_CONFIG and point it to the make config files
+# that set the configs you want to keep on (or off) in your build.
+# ADD_CONFIG is usually something to add configs to all machines,
+# where as, MIN_CONFIG is specific per machine.
+#ADD_CONFIG = ${THIS_DIR}/config-broken ${THIS_DIR}/config-general
+
+# To speed up reboots for bisects and patchcheck, instead of
+# waiting 60 seconds for the console to be idle, if this line is
+# seen in the console output, ktest will know the good kernel has
+# finished rebooting and it will be able to continue the tests.
+REBOOT_SUCCESS_LINE = ${MACHINE} login:
+
+# The following is different ways to end the test.
+# by setting the variable REBOOT to: none, error, fail or
+# something else, ktest will power cycle or reboot the target box
+# at the end of the tests.
+#
+# REBOOT := none
+# Don't do anything at the end of the test.
+#
+# REBOOT := error
+# Reboot the box if ktest detects an error
+#
+# REBOOT := fail
+# Do not stop on failure, and after all tests are complete
+# power off the box (for both success and error)
+# This is good to run over a weekend and you don't want to waste
+# electricity.
+#
+
+DEFAULTS IF ${REBOOT} == none
+REBOOT_ON_SUCCESS = 0
+REBOOT_ON_ERROR = 0
+POWEROFF_ON_ERROR = 0
+POWEROFF_ON_SUCCESS = 0
+
+DEFAULTS ELSE IF ${REBOOT} == error
+REBOOT_ON_SUCCESS = 0
+REBOOT_ON_ERROR = 1
+POWEROFF_ON_ERROR = 0
+POWEROFF_ON_SUCCESS = 0
+
+DEFAULTS ELSE IF ${REBOOT} == fail
+REBOOT_ON_SUCCESS = 0
+POWEROFF_ON_ERROR = 1
+POWEROFF_ON_SUCCESS = 1
+POWEROFF_AFTER_HALT = 120
+DIE_ON_FAILURE = 0
+
+# Store the failure information into this directory
+# such as the .config, dmesg, and build log.
+STORE_FAILURES = ${THIS_DIR}/failures
+
+DEFAULTS ELSE
+REBOOT_ON_SUCCESS = 1
+REBOOT_ON_ERROR = 1
+POWEROFF_ON_ERROR = 0
+POWEROFF_ON_SUCCESS = 0
diff --git a/kernel/tools/testing/ktest/examples/include/min-config.conf b/kernel/tools/testing/ktest/examples/include/min-config.conf
new file mode 100644
index 000000000..c703cc46d
--- /dev/null
+++ b/kernel/tools/testing/ktest/examples/include/min-config.conf
@@ -0,0 +1,60 @@
+#
+# This file has some examples for creating a MIN_CONFIG.
+# (A .config file that is the minimum for a machine to boot, or
+# to boot and make a network connection.)
+#
+# A MIN_CONFIG is very useful as it is the minimum configuration
+# needed to boot a given machine. You can debug someone else's
+# .config by only setting the configs in your MIN_CONFIG. The closer
+# your MIN_CONFIG is to the true minimum set of configs needed to
+# boot your machine, the closer the config you test with will be
+# to the users config that had the failure.
+#
+# The make_min_config test allows you to create a MIN_CONFIG that
+# is truly the minimum set of configs needed to boot a box.
+#
+# In this example, the final config will reside in
+# ${CONFIG_DIR}/config-new-min and ${CONFIG_DIR}/config-new-min-net.
+# Just move one to the location you have set for MIN_CONFIG.
+#
+# The first test creates a MIN_CONFIG that will be the minimum
+# configuration to boot ${MACHINE} and be able to ssh to it.
+#
+# The second test creates a MIN_CONFIG that will only boot
+# the target and most likely will not let you ssh to it. (Notice
+# how the second test uses the first test's result to continue with.
+# This is because the second test config is a subset of the first).
+#
+# The ${CONFIG_DIR}/config-skip (and -net) will hold the configs
+# that ktest.pl found would not boot the target without them set.
+# The config-new-min holds configs that ktest.pl could not test
+# directly because another config that was needed to boot the box
+# selected them. Sometimes it is possible that this file will hold
+# the true minimum configuration. You can test to see if this is
+# the case by running the boot test with BOOT_TYPE = allnoconfig and
+# setting setting the MIN_CONFIG to ${CONFIG_DIR}/config-skip. If the
+# machine still boots, then you can use the config-skip as your MIN_CONFIG.
+#
+# These tests can run for several hours (and perhaps days).
+# It's OK to kill the test with a Ctrl^C. By restarting without
+# modifying this config, ktest.pl will notice that the config-new-min(-net)
+# exists, and will use that instead as the starting point.
+# The USE_OUTPUT_MIN_CONFIG is set to 1 to keep ktest.pl from asking
+# you if you want to use the OUTPUT_MIN_CONFIG as the starting point.
+# By using the OUTPUT_MIN_CONFIG as the starting point will allow ktest.pl to
+# start almost where it left off.
+#
+TEST_START IF ${TEST} == min-config
+TEST_TYPE = make_min_config
+OUTPUT_MIN_CONFIG = ${CONFIG_DIR}/config-new-min-net
+IGNORE_CONFIG = ${CONFIG_DIR}/config-skip-net
+MIN_CONFIG_TYPE = test
+TEST = ${SSH} echo hi
+USE_OUTPUT_MIN_CONFIG = 1
+
+TEST_START IF ${TEST} == min-config && ${MULTI}
+TEST_TYPE = make_min_config
+OUTPUT_MIN_CONFIG = ${CONFIG_DIR}/config-new-min
+IGNORE_CONFIG = ${CONFIG_DIR}/config-skip
+MIN_CONFIG = ${CONFIG_DIR}/config-new-min-net
+USE_OUTPUT_MIN_CONFIG = 1
diff --git a/kernel/tools/testing/ktest/examples/include/patchcheck.conf b/kernel/tools/testing/ktest/examples/include/patchcheck.conf
new file mode 100644
index 000000000..0eb0a5ac7
--- /dev/null
+++ b/kernel/tools/testing/ktest/examples/include/patchcheck.conf
@@ -0,0 +1,111 @@
+# patchcheck.conf
+#
+# This contains a test that takes two git commits and will test each
+# commit between the two. The build test will look at what files the
+# commit has touched, and if any of those files produce a warning, then
+# the build will fail.
+
+
+# PATCH_START is the commit to begin with and PATCH_END is the commit
+# to end with (inclusive). This is similar to doing a git rebase -i PATCH_START~1
+# and then testing each commit and doing a git rebase --continue.
+# You can use a SHA1, a git tag, or anything that git will accept for a checkout
+
+PATCH_START := HEAD~3
+PATCH_END := HEAD
+
+# Use the oldconfig if build_type wasn't defined
+DEFAULTS IF NOT DEFINED BUILD_TYPE
+DO_BUILD_TYPE := oldconfig
+
+DEFAULTS ELSE
+DO_BUILD_TYPE := ${BUILD_TYPE}
+
+DEFAULTS
+
+
+# Change PATCH_CHECKOUT to be the branch you want to test. The test will
+# do a git checkout of this branch before starting. Obviously both
+# PATCH_START and PATCH_END must be in this branch (and PATCH_START must
+# be contained by PATCH_END).
+
+PATCH_CHECKOUT := test/branch
+
+# Usually it's a good idea to have a set config to use for testing individual
+# patches.
+PATCH_CONFIG := ${CONFIG_DIR}/config-patchcheck
+
+# Change PATCH_TEST to run some test for each patch. Each commit that is
+# tested, after it is built and installed on the test machine, this command
+# will be executed. Usually what is done is to ssh to the target box and
+# run some test scripts. If you just want to boot test your patches
+# comment PATCH_TEST out.
+PATCH_TEST := ${SSH} "/usr/local/bin/ktest-test-script"
+
+DEFAULTS IF DEFINED PATCH_TEST
+PATCH_TEST_TYPE := test
+
+DEFAULTS ELSE
+PATCH_TEST_TYPE := boot
+
+# If for some reason a file has a warning that one of your patches touch
+# but you do not care about it, set IGNORE_WARNINGS to that commit(s)
+# (space delimited)
+#IGNORE_WARNINGS = 39eaf7ef884dcc44f7ff1bac803ca2a1dcf43544 6edb2a8a385f0cdef51dae37ff23e74d76d8a6ce
+
+# Instead of just checking for warnings to files that are changed
+# it can be advantageous to check for any new warnings. If a
+# header file is changed, it could cause a warning in a file not
+# touched by the commit. To detect these kinds of warnings, you
+# can use the WARNINGS_FILE option.
+#
+# If the variable CREATE_WARNINGS_FILE is set, this config will
+# enable the WARNINGS_FILE during the patchcheck test. Also,
+# before running the patchcheck test, it will create the
+# warnings file.
+#
+DEFAULTS IF DEFINED CREATE_WARNINGS_FILE
+WARNINGS_FILE = ${OUTPUT_DIR}/warnings_file
+
+TEST_START IF DEFINED CREATE_WARNINGS_FILE
+# WARNINGS_FILE is already set by the DEFAULTS above
+TEST_TYPE = make_warnings_file
+# Checkout the commit before the patches to test,
+# and record all the warnings that exist before the patches
+# to test are added
+CHECKOUT = ${PATCHCHECK_START}~1
+# Force a full build
+BUILD_NOCLEAN = 0
+BUILD_TYPE = ${DO_BUILD_TYPE}
+
+# If you are running a multi test, and the test failed on the first
+# test but on, say the 5th patch. If you want to restart on the
+# fifth patch, set PATCH_START1. This will make the first test start
+# from this commit instead of the PATCH_START commit.
+# Note, do not change this option. Just define PATCH_START1 in the
+# top config (the one you pass to ktest.pl), and this will use it,
+# otherwise it will just use PATCH_START if PATCH_START1 is not defined.
+DEFAULTS IF NOT DEFINED PATCH_START1
+PATCH_START1 := ${PATCH_START}
+
+TEST_START IF ${TEST} == patchcheck
+TEST_TYPE = patchcheck
+MIN_CONFIG = ${PATCH_CONFIG}
+TEST = ${PATCH_TEST}
+PATCHCHECK_TYPE = ${PATCH_TEST_TYPE}
+PATCHCHECK_START = ${PATCH_START1}
+PATCHCHECK_END = ${PATCH_END}
+CHECKOUT = ${PATCH_CHECKOUT}
+BUILD_TYPE = ${DO_BUILD_TYPE}
+
+TEST_START IF ${TEST} == patchcheck && ${MULTI}
+TEST_TYPE = patchcheck
+MIN_CONFIG = ${PATCH_CONFIG}
+TEST = ${PATCH_TEST}
+PATCHCHECK_TYPE = ${PATCH_TEST_TYPE}
+PATCHCHECK_START = ${PATCH_START}
+PATCHCHECK_END = ${PATCH_END}
+CHECKOUT = ${PATCH_CHECKOUT}
+# Use multi to test different compilers?
+MAKE_CMD = CC=gcc-4.5.1 make
+BUILD_TYPE = ${DO_BUILD_TYPE}
diff --git a/kernel/tools/testing/ktest/examples/include/tests.conf b/kernel/tools/testing/ktest/examples/include/tests.conf
new file mode 100644
index 000000000..60cedb1a1
--- /dev/null
+++ b/kernel/tools/testing/ktest/examples/include/tests.conf
@@ -0,0 +1,74 @@
+#
+# This is an example of various tests that you can run
+#
+# The variable TEST can be of boot, build, randconfig, or test.
+#
+# Note that TEST is a variable created with ':=' and only exists
+# throughout the config processing (not during the tests itself).
+#
+# The TEST option (defined with '=') is used to tell ktest.pl
+# what test to run after a successful boot. The TEST option is
+# persistent into the test runs.
+#
+
+# The config that includes this file may define a BOOT_TYPE
+# variable that tells this config what type of boot test to run.
+# If it's not defined, the below DEFAULTS will set the default
+# to 'oldconfig'.
+#
+DEFAULTS IF NOT DEFINED BOOT_TYPE
+BOOT_TYPE := oldconfig
+
+# The config that includes this file may define a RUN_TEST
+# variable that will tell this config what test to run.
+# (what to set the TEST option to).
+#
+DEFAULTS IF NOT DEFINED RUN_TEST
+# Requires that hackbench is in the PATH
+RUN_TEST := ${SSH} hackbench 50
+
+
+# If TEST is set to 'boot' then just build a kernel and boot
+# the target.
+TEST_START IF ${TEST} == boot
+TEST_TYPE = boot
+# Notice how we set the BUILD_TYPE option to the BOOT_TYPE variable.
+BUILD_TYPE = ${BOOT_TYPE}
+# Do not do a make mrproper.
+BUILD_NOCLEAN = 1
+
+# If you only want to build the kernel, and perhaps install
+# and test it yourself, then just set TEST to build.
+TEST_START IF ${TEST} == build
+TEST_TYPE = build
+BUILD_TYPE = ${BOOT_TYPE}
+BUILD_NOCLEAN = 1
+
+# Build, install, boot and test with a randconfg 10 times.
+# It is important that you have set MIN_CONFIG in the config
+# that includes this file otherwise it is likely that the
+# randconfig will not have the necessary configs needed to
+# boot your box. This version of the test requires a min
+# config that has enough to make sure the target has network
+# working.
+TEST_START ITERATE 10 IF ${TEST} == randconfig
+MIN_CONFIG = ${CONFIG_DIR}/config-min-net
+TEST_TYPE = test
+BUILD_TYPE = randconfig
+TEST = ${RUN_TEST}
+
+# This is the same as above, but only tests to a boot prompt.
+# The MIN_CONFIG used here does not need to have networking
+# working.
+TEST_START ITERATE 10 IF ${TEST} == randconfig && ${MULTI}
+TEST_TYPE = boot
+BUILD_TYPE = randconfig
+MIN_CONFIG = ${CONFIG_DIR}/config-min
+MAKE_CMD = make
+
+# This builds, installs, boots and tests the target.
+TEST_START IF ${TEST} == test
+TEST_TYPE = test
+BUILD_TYPE = ${BOOT_TYPE}
+TEST = ${RUN_TEST}
+BUILD_NOCLEAN = 1
diff --git a/kernel/tools/testing/ktest/examples/kvm.conf b/kernel/tools/testing/ktest/examples/kvm.conf
new file mode 100644
index 000000000..fbc134f9a
--- /dev/null
+++ b/kernel/tools/testing/ktest/examples/kvm.conf
@@ -0,0 +1,92 @@
+#
+# This config is an example usage of ktest.pl with a kvm guest
+#
+# The guest is called 'Guest' and this would be something that
+# could be run on the host to test a virtual machine target.
+
+MACHINE = Guest
+
+
+# Use virsh to read the serial console of the guest
+CONSOLE = virsh console ${MACHINE}
+
+# Use SIGKILL to terminate virsh console. We can't kill virsh console
+# by the default signal, SIGINT.
+CLOSE_CONSOLE_SIGNAL = KILL
+
+#*************************************#
+# This part is the same as test.conf #
+#*************************************#
+
+# The include files will set up the type of test to run. Just set TEST to
+# which test you want to run.
+#
+# TESTS = patchcheck, randconfig, boot, test, config-bisect, bisect, min-config
+#
+# See the include/*.conf files that define these tests
+#
+TEST := patchcheck
+
+# Some tests may have more than one test to run. Define MULTI := 1 to run
+# the extra tests.
+MULTI := 0
+
+# In case you want to differentiate which type of system you are testing
+BITS := 64
+
+# REBOOT = none, error, fail, empty
+# See include/defaults.conf
+REBOOT := empty
+
+
+# The defaults file will set up various settings that can be used by all
+# machine configs.
+INCLUDE include/defaults.conf
+
+
+#*************************************#
+# Now we are different from test.conf #
+#*************************************#
+
+
+# The example here assumes that Guest is running a Fedora release
+# that uses dracut for its initfs. The POST_INSTALL will be executed
+# after the install of the kernel and modules are complete.
+#
+POST_INSTALL = ${SSH} /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION
+
+# Guests sometimes get stuck on reboot. We wait 3 seconds after running
+# the reboot command and then do a full power-cycle of the guest.
+# This forces the guest to restart.
+#
+POWERCYCLE_AFTER_REBOOT = 3
+
+# We do the same after the halt command, but this time we wait 20 seconds.
+POWEROFF_AFTER_HALT = 20
+
+
+# As the defaults.conf file has a POWER_CYCLE option already defined,
+# and options can not be defined in the same section more than once
+# (all DEFAULTS sections are considered the same). We use the
+# DEFAULTS OVERRIDE to tell ktest.pl to ignore the previous defined
+# options, for the options set in the OVERRIDE section.
+#
+DEFAULTS OVERRIDE
+
+# Instead of using the default POWER_CYCLE option defined in
+# defaults.conf, we use virsh to cycle it. To do so, we destroy
+# the guest, wait 5 seconds, and then start it up again.
+# Crude, but effective.
+#
+POWER_CYCLE = virsh destroy ${MACHINE}; sleep 5; virsh start ${MACHINE}
+
+
+DEFAULTS
+
+# The following files each handle a different test case.
+# Having them included allows you to set up more than one machine and share
+# the same tests.
+INCLUDE include/patchcheck.conf
+INCLUDE include/tests.conf
+INCLUDE include/bisect.conf
+INCLUDE include/min-config.conf
diff --git a/kernel/tools/testing/ktest/examples/snowball.conf b/kernel/tools/testing/ktest/examples/snowball.conf
new file mode 100644
index 000000000..a82a3c5bc
--- /dev/null
+++ b/kernel/tools/testing/ktest/examples/snowball.conf
@@ -0,0 +1,53 @@
+# This example was used to boot the snowball ARM board.
+# See http://people.redhat.com/srostedt/ktest-embedded-2012/
+
+# PWD is a ktest.pl variable that will result in the process working
+# directory that ktest.pl is executed in.
+
+# THIS_DIR is automatically assigned the PWD of the path that generated
+# the config file. It is best to use this variable when assigning other
+# directory paths within this directory. This allows you to easily
+# move the test cases to other locations or to other machines.
+#
+THIS_DIR := /home/rostedt/work/demo/ktest-embed
+LOG_FILE = ${OUTPUT_DIR}/snowball.log
+CLEAR_LOG = 1
+MAKE_CMD = PATH=/usr/local/gcc-4.5.2-nolibc/arm-unknown-linux-gnueabi/bin:$PATH CROSS_COMPILE=arm-unknown-linux-gnueabi- make ARCH=arm
+ADD_CONFIG = ${THIS_DIR}/addconfig
+
+SCP_TO_TARGET = echo "don't do scp"
+
+TFTPBOOT := /var/lib/tftpboot
+TFTPDEF := ${TFTPBOOT}/snowball-default
+TFTPTEST := ${OUTPUT_DIR}/${BUILD_TARGET}
+
+SWITCH_TO_GOOD = cp ${TFTPDEF} ${TARGET_IMAGE}
+SWITCH_TO_TEST = cp ${TFTPTEST} ${TARGET_IMAGE}
+
+# Define each test with TEST_START
+# The config options below it will override the defaults
+TEST_START SKIP
+TEST_TYPE = boot
+BUILD_TYPE = u8500_defconfig
+BUILD_NOCLEAN = 1
+
+TEST_START
+TEST_TYPE = make_min_config
+OUTPUT_MIN_CONFIG = ${THIS_DIR}/config.newmin
+START_MIN_CONFIG = ${THIS_DIR}/config.orig
+IGNORE_CONFIG = ${THIS_DIR}/config.ignore
+BUILD_NOCLEAN = 1
+
+
+DEFAULTS
+LOCALVERSION = -test
+POWER_CYCLE = echo use the thumb luke; read a
+CONSOLE = cat ${THIS_DIR}/snowball-cat
+REBOOT_TYPE = script
+SSH_USER = root
+BUILD_OPTIONS = -j8 uImage
+BUILD_DIR = ${THIS_DIR}/linux.git
+OUTPUT_DIR = ${THIS_DIR}/snowball-build
+MACHINE = snowball
+TARGET_IMAGE = /var/lib/tftpboot/snowball-image
+BUILD_TARGET = arch/arm/boot/uImage
diff --git a/kernel/tools/testing/ktest/examples/test.conf b/kernel/tools/testing/ktest/examples/test.conf
new file mode 100644
index 000000000..b725210ef
--- /dev/null
+++ b/kernel/tools/testing/ktest/examples/test.conf
@@ -0,0 +1,62 @@
+#
+# Generic config for a machine
+#
+
+# Name your machine (the DNS name, what you ssh to)
+MACHINE = foo
+
+# BOX can be different than foo, if the machine BOX has
+# multiple partitions with different systems installed. For example,
+# you may have a i386 and x86_64 installation on a test box.
+# If this is the case, MACHINE defines the way to connect to the
+# machine, which may be different between which system the machine
+# is booting into. BOX is used for the scripts to reboot and power cycle
+# the machine, where it does not matter which system the machine boots into.
+#
+#BOX := bar
+
+# Define a way to read the console
+CONSOLE = stty -F /dev/ttyS0 115200 parodd; cat /dev/ttyS0
+
+# The include files will set up the type of test to run. Just set TEST to
+# which test you want to run.
+#
+# TESTS = patchcheck, randconfig, boot, test, config-bisect, bisect, min-config
+#
+# See the include/*.conf files that define these tests
+#
+TEST := patchcheck
+
+# Some tests may have more than one test to run. Define MULTI := 1 to run
+# the extra tests.
+MULTI := 0
+
+# In case you want to differentiate which type of system you are testing
+BITS := 64
+
+# REBOOT = none, error, fail, empty
+# See include/defaults.conf
+REBOOT := empty
+
+# The defaults file will set up various settings that can be used by all
+# machine configs.
+INCLUDE include/defaults.conf
+
+# In case you need to add a patch for a bisect or something
+#PRE_BUILD = patch -p1 < ${THIS_DIR}/fix.patch
+
+# Reset the repo after the build and remove all 'test' modules from the target
+# Notice that DO_POST_BUILD is a variable (defined by ':=') and POST_BUILD
+# is the option (defined by '=')
+
+DO_POST_BUILD := git reset --hard
+POST_BUILD = ${SSH} 'rm -rf /lib/modules/*-test*'; ${DO_POST_BUILD}
+
+# The following files each handle a different test case.
+# Having them included allows you to set up more than one machine and share
+# the same tests.
+INCLUDE include/patchcheck.conf
+INCLUDE include/tests.conf
+INCLUDE include/bisect.conf
+INCLUDE include/min-config.conf
+
diff --git a/kernel/tools/testing/ktest/ktest.pl b/kernel/tools/testing/ktest/ktest.pl
new file mode 100755
index 000000000..d08e214ec
--- /dev/null
+++ b/kernel/tools/testing/ktest/ktest.pl
@@ -0,0 +1,4387 @@
+#!/usr/bin/perl -w
+#
+# Copyright 2010 - Steven Rostedt <srostedt@redhat.com>, Red Hat Inc.
+# Licensed under the terms of the GNU GPL License version 2
+#
+
+use strict;
+use IPC::Open2;
+use Fcntl qw(F_GETFL F_SETFL O_NONBLOCK);
+use File::Path qw(mkpath);
+use File::Copy qw(cp);
+use FileHandle;
+
+my $VERSION = "0.2";
+
+$| = 1;
+
+my %opt;
+my %repeat_tests;
+my %repeats;
+my %evals;
+
+#default opts
+my %default = (
+ "NUM_TESTS" => 1,
+ "TEST_TYPE" => "build",
+ "BUILD_TYPE" => "randconfig",
+ "MAKE_CMD" => "make",
+ "CLOSE_CONSOLE_SIGNAL" => "INT",
+ "TIMEOUT" => 120,
+ "TMP_DIR" => "/tmp/ktest/\${MACHINE}",
+ "SLEEP_TIME" => 60, # sleep time between tests
+ "BUILD_NOCLEAN" => 0,
+ "REBOOT_ON_ERROR" => 0,
+ "POWEROFF_ON_ERROR" => 0,
+ "REBOOT_ON_SUCCESS" => 1,
+ "POWEROFF_ON_SUCCESS" => 0,
+ "BUILD_OPTIONS" => "",
+ "BISECT_SLEEP_TIME" => 60, # sleep time between bisects
+ "PATCHCHECK_SLEEP_TIME" => 60, # sleep time between patch checks
+ "CLEAR_LOG" => 0,
+ "BISECT_MANUAL" => 0,
+ "BISECT_SKIP" => 1,
+ "BISECT_TRIES" => 1,
+ "MIN_CONFIG_TYPE" => "boot",
+ "SUCCESS_LINE" => "login:",
+ "DETECT_TRIPLE_FAULT" => 1,
+ "NO_INSTALL" => 0,
+ "BOOTED_TIMEOUT" => 1,
+ "DIE_ON_FAILURE" => 1,
+ "SSH_EXEC" => "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND",
+ "SCP_TO_TARGET" => "scp \$SRC_FILE \$SSH_USER\@\$MACHINE:\$DST_FILE",
+ "SCP_TO_TARGET_INSTALL" => "\${SCP_TO_TARGET}",
+ "REBOOT" => "ssh \$SSH_USER\@\$MACHINE reboot",
+ "STOP_AFTER_SUCCESS" => 10,
+ "STOP_AFTER_FAILURE" => 60,
+ "STOP_TEST_AFTER" => 600,
+ "MAX_MONITOR_WAIT" => 1800,
+ "GRUB_REBOOT" => "grub2-reboot",
+ "SYSLINUX" => "extlinux",
+ "SYSLINUX_PATH" => "/boot/extlinux",
+
+# required, and we will ask users if they don't have them but we keep the default
+# value something that is common.
+ "REBOOT_TYPE" => "grub",
+ "LOCALVERSION" => "-test",
+ "SSH_USER" => "root",
+ "BUILD_TARGET" => "arch/x86/boot/bzImage",
+ "TARGET_IMAGE" => "/boot/vmlinuz-test",
+
+ "LOG_FILE" => undef,
+ "IGNORE_UNUSED" => 0,
+);
+
+my $ktest_config = "ktest.conf";
+my $version;
+my $have_version = 0;
+my $machine;
+my $last_machine;
+my $ssh_user;
+my $tmpdir;
+my $builddir;
+my $outputdir;
+my $output_config;
+my $test_type;
+my $build_type;
+my $build_options;
+my $final_post_ktest;
+my $pre_ktest;
+my $post_ktest;
+my $pre_test;
+my $post_test;
+my $pre_build;
+my $post_build;
+my $pre_build_die;
+my $post_build_die;
+my $reboot_type;
+my $reboot_script;
+my $power_cycle;
+my $reboot;
+my $reboot_on_error;
+my $switch_to_good;
+my $switch_to_test;
+my $poweroff_on_error;
+my $reboot_on_success;
+my $die_on_failure;
+my $powercycle_after_reboot;
+my $poweroff_after_halt;
+my $max_monitor_wait;
+my $ssh_exec;
+my $scp_to_target;
+my $scp_to_target_install;
+my $power_off;
+my $grub_menu;
+my $last_grub_menu;
+my $grub_file;
+my $grub_number;
+my $grub_reboot;
+my $syslinux;
+my $syslinux_path;
+my $syslinux_label;
+my $target;
+my $make;
+my $pre_install;
+my $post_install;
+my $no_install;
+my $noclean;
+my $minconfig;
+my $start_minconfig;
+my $start_minconfig_defined;
+my $output_minconfig;
+my $minconfig_type;
+my $use_output_minconfig;
+my $warnings_file;
+my $ignore_config;
+my $ignore_errors;
+my $addconfig;
+my $in_bisect = 0;
+my $bisect_bad_commit = "";
+my $reverse_bisect;
+my $bisect_manual;
+my $bisect_skip;
+my $bisect_tries;
+my $config_bisect_good;
+my $bisect_ret_good;
+my $bisect_ret_bad;
+my $bisect_ret_skip;
+my $bisect_ret_abort;
+my $bisect_ret_default;
+my $in_patchcheck = 0;
+my $run_test;
+my $buildlog;
+my $testlog;
+my $dmesg;
+my $monitor_fp;
+my $monitor_pid;
+my $monitor_cnt = 0;
+my $sleep_time;
+my $bisect_sleep_time;
+my $patchcheck_sleep_time;
+my $ignore_warnings;
+my $store_failures;
+my $store_successes;
+my $test_name;
+my $timeout;
+my $booted_timeout;
+my $detect_triplefault;
+my $console;
+my $close_console_signal;
+my $reboot_success_line;
+my $success_line;
+my $stop_after_success;
+my $stop_after_failure;
+my $stop_test_after;
+my $build_target;
+my $target_image;
+my $checkout;
+my $localversion;
+my $iteration = 0;
+my $successes = 0;
+my $stty_orig;
+
+my $bisect_good;
+my $bisect_bad;
+my $bisect_type;
+my $bisect_start;
+my $bisect_replay;
+my $bisect_files;
+my $bisect_reverse;
+my $bisect_check;
+
+my $config_bisect;
+my $config_bisect_type;
+my $config_bisect_check;
+
+my $patchcheck_type;
+my $patchcheck_start;
+my $patchcheck_cherry;
+my $patchcheck_end;
+
+my $build_time;
+my $install_time;
+my $reboot_time;
+my $test_time;
+
+# set when a test is something other that just building or install
+# which would require more options.
+my $buildonly = 1;
+
+# tell build not to worry about warnings, even when WARNINGS_FILE is set
+my $warnings_ok = 0;
+
+# set when creating a new config
+my $newconfig = 0;
+
+my %entered_configs;
+my %config_help;
+my %variable;
+
+# force_config is the list of configs that we force enabled (or disabled)
+# in a .config file. The MIN_CONFIG and ADD_CONFIG configs.
+my %force_config;
+
+# do not force reboots on config problems
+my $no_reboot = 1;
+
+# reboot on success
+my $reboot_success = 0;
+
+my %option_map = (
+ "MACHINE" => \$machine,
+ "SSH_USER" => \$ssh_user,
+ "TMP_DIR" => \$tmpdir,
+ "OUTPUT_DIR" => \$outputdir,
+ "BUILD_DIR" => \$builddir,
+ "TEST_TYPE" => \$test_type,
+ "PRE_KTEST" => \$pre_ktest,
+ "POST_KTEST" => \$post_ktest,
+ "PRE_TEST" => \$pre_test,
+ "POST_TEST" => \$post_test,
+ "BUILD_TYPE" => \$build_type,
+ "BUILD_OPTIONS" => \$build_options,
+ "PRE_BUILD" => \$pre_build,
+ "POST_BUILD" => \$post_build,
+ "PRE_BUILD_DIE" => \$pre_build_die,
+ "POST_BUILD_DIE" => \$post_build_die,
+ "POWER_CYCLE" => \$power_cycle,
+ "REBOOT" => \$reboot,
+ "BUILD_NOCLEAN" => \$noclean,
+ "MIN_CONFIG" => \$minconfig,
+ "OUTPUT_MIN_CONFIG" => \$output_minconfig,
+ "START_MIN_CONFIG" => \$start_minconfig,
+ "MIN_CONFIG_TYPE" => \$minconfig_type,
+ "USE_OUTPUT_MIN_CONFIG" => \$use_output_minconfig,
+ "WARNINGS_FILE" => \$warnings_file,
+ "IGNORE_CONFIG" => \$ignore_config,
+ "TEST" => \$run_test,
+ "ADD_CONFIG" => \$addconfig,
+ "REBOOT_TYPE" => \$reboot_type,
+ "GRUB_MENU" => \$grub_menu,
+ "GRUB_FILE" => \$grub_file,
+ "GRUB_REBOOT" => \$grub_reboot,
+ "SYSLINUX" => \$syslinux,
+ "SYSLINUX_PATH" => \$syslinux_path,
+ "SYSLINUX_LABEL" => \$syslinux_label,
+ "PRE_INSTALL" => \$pre_install,
+ "POST_INSTALL" => \$post_install,
+ "NO_INSTALL" => \$no_install,
+ "REBOOT_SCRIPT" => \$reboot_script,
+ "REBOOT_ON_ERROR" => \$reboot_on_error,
+ "SWITCH_TO_GOOD" => \$switch_to_good,
+ "SWITCH_TO_TEST" => \$switch_to_test,
+ "POWEROFF_ON_ERROR" => \$poweroff_on_error,
+ "REBOOT_ON_SUCCESS" => \$reboot_on_success,
+ "DIE_ON_FAILURE" => \$die_on_failure,
+ "POWER_OFF" => \$power_off,
+ "POWERCYCLE_AFTER_REBOOT" => \$powercycle_after_reboot,
+ "POWEROFF_AFTER_HALT" => \$poweroff_after_halt,
+ "MAX_MONITOR_WAIT" => \$max_monitor_wait,
+ "SLEEP_TIME" => \$sleep_time,
+ "BISECT_SLEEP_TIME" => \$bisect_sleep_time,
+ "PATCHCHECK_SLEEP_TIME" => \$patchcheck_sleep_time,
+ "IGNORE_WARNINGS" => \$ignore_warnings,
+ "IGNORE_ERRORS" => \$ignore_errors,
+ "BISECT_MANUAL" => \$bisect_manual,
+ "BISECT_SKIP" => \$bisect_skip,
+ "BISECT_TRIES" => \$bisect_tries,
+ "CONFIG_BISECT_GOOD" => \$config_bisect_good,
+ "BISECT_RET_GOOD" => \$bisect_ret_good,
+ "BISECT_RET_BAD" => \$bisect_ret_bad,
+ "BISECT_RET_SKIP" => \$bisect_ret_skip,
+ "BISECT_RET_ABORT" => \$bisect_ret_abort,
+ "BISECT_RET_DEFAULT" => \$bisect_ret_default,
+ "STORE_FAILURES" => \$store_failures,
+ "STORE_SUCCESSES" => \$store_successes,
+ "TEST_NAME" => \$test_name,
+ "TIMEOUT" => \$timeout,
+ "BOOTED_TIMEOUT" => \$booted_timeout,
+ "CONSOLE" => \$console,
+ "CLOSE_CONSOLE_SIGNAL" => \$close_console_signal,
+ "DETECT_TRIPLE_FAULT" => \$detect_triplefault,
+ "SUCCESS_LINE" => \$success_line,
+ "REBOOT_SUCCESS_LINE" => \$reboot_success_line,
+ "STOP_AFTER_SUCCESS" => \$stop_after_success,
+ "STOP_AFTER_FAILURE" => \$stop_after_failure,
+ "STOP_TEST_AFTER" => \$stop_test_after,
+ "BUILD_TARGET" => \$build_target,
+ "SSH_EXEC" => \$ssh_exec,
+ "SCP_TO_TARGET" => \$scp_to_target,
+ "SCP_TO_TARGET_INSTALL" => \$scp_to_target_install,
+ "CHECKOUT" => \$checkout,
+ "TARGET_IMAGE" => \$target_image,
+ "LOCALVERSION" => \$localversion,
+
+ "BISECT_GOOD" => \$bisect_good,
+ "BISECT_BAD" => \$bisect_bad,
+ "BISECT_TYPE" => \$bisect_type,
+ "BISECT_START" => \$bisect_start,
+ "BISECT_REPLAY" => \$bisect_replay,
+ "BISECT_FILES" => \$bisect_files,
+ "BISECT_REVERSE" => \$bisect_reverse,
+ "BISECT_CHECK" => \$bisect_check,
+
+ "CONFIG_BISECT" => \$config_bisect,
+ "CONFIG_BISECT_TYPE" => \$config_bisect_type,
+ "CONFIG_BISECT_CHECK" => \$config_bisect_check,
+
+ "PATCHCHECK_TYPE" => \$patchcheck_type,
+ "PATCHCHECK_START" => \$patchcheck_start,
+ "PATCHCHECK_CHERRY" => \$patchcheck_cherry,
+ "PATCHCHECK_END" => \$patchcheck_end,
+);
+
+# Options may be used by other options, record them.
+my %used_options;
+
+# default variables that can be used
+chomp ($variable{"PWD"} = `pwd`);
+
+$config_help{"MACHINE"} = << "EOF"
+ The machine hostname that you will test.
+ For build only tests, it is still needed to differentiate log files.
+EOF
+ ;
+$config_help{"SSH_USER"} = << "EOF"
+ The box is expected to have ssh on normal bootup, provide the user
+ (most likely root, since you need privileged operations)
+EOF
+ ;
+$config_help{"BUILD_DIR"} = << "EOF"
+ The directory that contains the Linux source code (full path).
+ You can use \${PWD} that will be the path where ktest.pl is run, or use
+ \${THIS_DIR} which is assigned \${PWD} but may be changed later.
+EOF
+ ;
+$config_help{"OUTPUT_DIR"} = << "EOF"
+ The directory that the objects will be built (full path).
+ (can not be same as BUILD_DIR)
+ You can use \${PWD} that will be the path where ktest.pl is run, or use
+ \${THIS_DIR} which is assigned \${PWD} but may be changed later.
+EOF
+ ;
+$config_help{"BUILD_TARGET"} = << "EOF"
+ The location of the compiled file to copy to the target.
+ (relative to OUTPUT_DIR)
+EOF
+ ;
+$config_help{"BUILD_OPTIONS"} = << "EOF"
+ Options to add to \"make\" when building.
+ i.e. -j20
+EOF
+ ;
+$config_help{"TARGET_IMAGE"} = << "EOF"
+ The place to put your image on the test machine.
+EOF
+ ;
+$config_help{"POWER_CYCLE"} = << "EOF"
+ A script or command to reboot the box.
+
+ Here is a digital loggers power switch example
+ POWER_CYCLE = wget --no-proxy -O /dev/null -q --auth-no-challenge 'http://admin:admin\@power/outlet?5=CCL'
+
+ Here is an example to reboot a virtual box on the current host
+ with the name "Guest".
+ POWER_CYCLE = virsh destroy Guest; sleep 5; virsh start Guest
+EOF
+ ;
+$config_help{"CONSOLE"} = << "EOF"
+ The script or command that reads the console
+
+ If you use ttywatch server, something like the following would work.
+CONSOLE = nc -d localhost 3001
+
+ For a virtual machine with guest name "Guest".
+CONSOLE = virsh console Guest
+EOF
+ ;
+$config_help{"LOCALVERSION"} = << "EOF"
+ Required version ending to differentiate the test
+ from other linux builds on the system.
+EOF
+ ;
+$config_help{"REBOOT_TYPE"} = << "EOF"
+ Way to reboot the box to the test kernel.
+ Only valid options so far are "grub", "grub2", "syslinux", and "script".
+
+ If you specify grub, it will assume grub version 1
+ and will search in /boot/grub/menu.lst for the title \$GRUB_MENU
+ and select that target to reboot to the kernel. If this is not
+ your setup, then specify "script" and have a command or script
+ specified in REBOOT_SCRIPT to boot to the target.
+
+ The entry in /boot/grub/menu.lst must be entered in manually.
+ The test will not modify that file.
+
+ If you specify grub2, then you also need to specify both \$GRUB_MENU
+ and \$GRUB_FILE.
+
+ If you specify syslinux, then you may use SYSLINUX to define the syslinux
+ command (defaults to extlinux), and SYSLINUX_PATH to specify the path to
+ the syslinux install (defaults to /boot/extlinux). But you have to specify
+ SYSLINUX_LABEL to define the label to boot to for the test kernel.
+EOF
+ ;
+$config_help{"GRUB_MENU"} = << "EOF"
+ The grub title name for the test kernel to boot
+ (Only mandatory if REBOOT_TYPE = grub or grub2)
+
+ Note, ktest.pl will not update the grub menu.lst, you need to
+ manually add an option for the test. ktest.pl will search
+ the grub menu.lst for this option to find what kernel to
+ reboot into.
+
+ For example, if in the /boot/grub/menu.lst the test kernel title has:
+ title Test Kernel
+ kernel vmlinuz-test
+ GRUB_MENU = Test Kernel
+
+ For grub2, a search of \$GRUB_FILE is performed for the lines
+ that begin with "menuentry". It will not detect submenus. The
+ menu must be a non-nested menu. Add the quotes used in the menu
+ to guarantee your selection, as the first menuentry with the content
+ of \$GRUB_MENU that is found will be used.
+EOF
+ ;
+$config_help{"GRUB_FILE"} = << "EOF"
+ If grub2 is used, the full path for the grub.cfg file is placed
+ here. Use something like /boot/grub2/grub.cfg to search.
+EOF
+ ;
+$config_help{"SYSLINUX_LABEL"} = << "EOF"
+ If syslinux is used, the label that boots the target kernel must
+ be specified with SYSLINUX_LABEL.
+EOF
+ ;
+$config_help{"REBOOT_SCRIPT"} = << "EOF"
+ A script to reboot the target into the test kernel
+ (Only mandatory if REBOOT_TYPE = script)
+EOF
+ ;
+
+sub _logit {
+ if (defined($opt{"LOG_FILE"})) {
+ open(OUT, ">> $opt{LOG_FILE}") or die "Can't write to $opt{LOG_FILE}";
+ print OUT @_;
+ close(OUT);
+ }
+}
+
+sub logit {
+ if (defined($opt{"LOG_FILE"})) {
+ _logit @_;
+ } else {
+ print @_;
+ }
+}
+
+sub doprint {
+ print @_;
+ _logit @_;
+}
+
+sub read_prompt {
+ my ($cancel, $prompt) = @_;
+
+ my $ans;
+
+ for (;;) {
+ if ($cancel) {
+ print "$prompt [y/n/C] ";
+ } else {
+ print "$prompt [Y/n] ";
+ }
+ $ans = <STDIN>;
+ chomp $ans;
+ if ($ans =~ /^\s*$/) {
+ if ($cancel) {
+ $ans = "c";
+ } else {
+ $ans = "y";
+ }
+ }
+ last if ($ans =~ /^y$/i || $ans =~ /^n$/i);
+ if ($cancel) {
+ last if ($ans =~ /^c$/i);
+ print "Please answer either 'y', 'n' or 'c'.\n";
+ } else {
+ print "Please answer either 'y' or 'n'.\n";
+ }
+ }
+ if ($ans =~ /^c/i) {
+ exit;
+ }
+ if ($ans !~ /^y$/i) {
+ return 0;
+ }
+ return 1;
+}
+
+sub read_yn {
+ my ($prompt) = @_;
+
+ return read_prompt 0, $prompt;
+}
+
+sub read_ync {
+ my ($prompt) = @_;
+
+ return read_prompt 1, $prompt;
+}
+
+sub get_mandatory_config {
+ my ($config) = @_;
+ my $ans;
+
+ return if (defined($opt{$config}));
+
+ if (defined($config_help{$config})) {
+ print "\n";
+ print $config_help{$config};
+ }
+
+ for (;;) {
+ print "$config = ";
+ if (defined($default{$config}) && length($default{$config})) {
+ print "\[$default{$config}\] ";
+ }
+ $ans = <STDIN>;
+ $ans =~ s/^\s*(.*\S)\s*$/$1/;
+ if ($ans =~ /^\s*$/) {
+ if ($default{$config}) {
+ $ans = $default{$config};
+ } else {
+ print "Your answer can not be blank\n";
+ next;
+ }
+ }
+ $entered_configs{$config} = ${ans};
+ last;
+ }
+}
+
+sub show_time {
+ my ($time) = @_;
+
+ my $hours = 0;
+ my $minutes = 0;
+
+ if ($time > 3600) {
+ $hours = int($time / 3600);
+ $time -= $hours * 3600;
+ }
+ if ($time > 60) {
+ $minutes = int($time / 60);
+ $time -= $minutes * 60;
+ }
+
+ if ($hours > 0) {
+ doprint "$hours hour";
+ doprint "s" if ($hours > 1);
+ doprint " ";
+ }
+
+ if ($minutes > 0) {
+ doprint "$minutes minute";
+ doprint "s" if ($minutes > 1);
+ doprint " ";
+ }
+
+ doprint "$time second";
+ doprint "s" if ($time != 1);
+}
+
+sub print_times {
+ doprint "\n";
+ if ($build_time) {
+ doprint "Build time: ";
+ show_time($build_time);
+ doprint "\n";
+ }
+ if ($install_time) {
+ doprint "Install time: ";
+ show_time($install_time);
+ doprint "\n";
+ }
+ if ($reboot_time) {
+ doprint "Reboot time: ";
+ show_time($reboot_time);
+ doprint "\n";
+ }
+ if ($test_time) {
+ doprint "Test time: ";
+ show_time($test_time);
+ doprint "\n";
+ }
+ # reset for iterations like bisect
+ $build_time = 0;
+ $install_time = 0;
+ $reboot_time = 0;
+ $test_time = 0;
+}
+
+sub get_mandatory_configs {
+ get_mandatory_config("MACHINE");
+ get_mandatory_config("BUILD_DIR");
+ get_mandatory_config("OUTPUT_DIR");
+
+ if ($newconfig) {
+ get_mandatory_config("BUILD_OPTIONS");
+ }
+
+ # options required for other than just building a kernel
+ if (!$buildonly) {
+ get_mandatory_config("POWER_CYCLE");
+ get_mandatory_config("CONSOLE");
+ }
+
+ # options required for install and more
+ if ($buildonly != 1) {
+ get_mandatory_config("SSH_USER");
+ get_mandatory_config("BUILD_TARGET");
+ get_mandatory_config("TARGET_IMAGE");
+ }
+
+ get_mandatory_config("LOCALVERSION");
+
+ return if ($buildonly);
+
+ my $rtype = $opt{"REBOOT_TYPE"};
+
+ if (!defined($rtype)) {
+ if (!defined($opt{"GRUB_MENU"})) {
+ get_mandatory_config("REBOOT_TYPE");
+ $rtype = $entered_configs{"REBOOT_TYPE"};
+ } else {
+ $rtype = "grub";
+ }
+ }
+
+ if ($rtype eq "grub") {
+ get_mandatory_config("GRUB_MENU");
+ }
+
+ if ($rtype eq "grub2") {
+ get_mandatory_config("GRUB_MENU");
+ get_mandatory_config("GRUB_FILE");
+ }
+
+ if ($rtype eq "syslinux") {
+ get_mandatory_config("SYSLINUX_LABEL");
+ }
+}
+
+sub process_variables {
+ my ($value, $remove_undef) = @_;
+ my $retval = "";
+
+ # We want to check for '\', and it is just easier
+ # to check the previous characet of '$' and not need
+ # to worry if '$' is the first character. By adding
+ # a space to $value, we can just check [^\\]\$ and
+ # it will still work.
+ $value = " $value";
+
+ while ($value =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) {
+ my $begin = $1;
+ my $var = $2;
+ my $end = $3;
+ # append beginning of value to retval
+ $retval = "$retval$begin";
+ if (defined($variable{$var})) {
+ $retval = "$retval$variable{$var}";
+ } elsif (defined($remove_undef) && $remove_undef) {
+ # for if statements, any variable that is not defined,
+ # we simple convert to 0
+ $retval = "${retval}0";
+ } else {
+ # put back the origin piece.
+ $retval = "$retval\$\{$var\}";
+ # This could be an option that is used later, save
+ # it so we don't warn if this option is not one of
+ # ktests options.
+ $used_options{$var} = 1;
+ }
+ $value = $end;
+ }
+ $retval = "$retval$value";
+
+ # remove the space added in the beginning
+ $retval =~ s/ //;
+
+ return "$retval"
+}
+
+sub set_value {
+ my ($lvalue, $rvalue, $override, $overrides, $name) = @_;
+
+ my $prvalue = process_variables($rvalue);
+
+ if ($buildonly && $lvalue =~ /^TEST_TYPE(\[.*\])?$/ && $prvalue ne "build") {
+ # Note if a test is something other than build, then we
+ # will need other manditory options.
+ if ($prvalue ne "install") {
+ # for bisect, we need to check BISECT_TYPE
+ if ($prvalue ne "bisect") {
+ $buildonly = 0;
+ }
+ } else {
+ # install still limits some manditory options.
+ $buildonly = 2;
+ }
+ }
+
+ if ($buildonly && $lvalue =~ /^BISECT_TYPE(\[.*\])?$/ && $prvalue ne "build") {
+ if ($prvalue ne "install") {
+ $buildonly = 0;
+ } else {
+ # install still limits some manditory options.
+ $buildonly = 2;
+ }
+ }
+
+ if (defined($opt{$lvalue})) {
+ if (!$override || defined(${$overrides}{$lvalue})) {
+ my $extra = "";
+ if ($override) {
+ $extra = "In the same override section!\n";
+ }
+ die "$name: $.: Option $lvalue defined more than once!\n$extra";
+ }
+ ${$overrides}{$lvalue} = $prvalue;
+ }
+
+ $opt{$lvalue} = $prvalue;
+}
+
+sub set_eval {
+ my ($lvalue, $rvalue, $name) = @_;
+
+ my $prvalue = process_variables($rvalue);
+ my $arr;
+
+ if (defined($evals{$lvalue})) {
+ $arr = $evals{$lvalue};
+ } else {
+ $arr = [];
+ $evals{$lvalue} = $arr;
+ }
+
+ push @{$arr}, $rvalue;
+}
+
+sub set_variable {
+ my ($lvalue, $rvalue) = @_;
+
+ if ($rvalue =~ /^\s*$/) {
+ delete $variable{$lvalue};
+ } else {
+ $rvalue = process_variables($rvalue);
+ $variable{$lvalue} = $rvalue;
+ }
+}
+
+sub process_compare {
+ my ($lval, $cmp, $rval) = @_;
+
+ # remove whitespace
+
+ $lval =~ s/^\s*//;
+ $lval =~ s/\s*$//;
+
+ $rval =~ s/^\s*//;
+ $rval =~ s/\s*$//;
+
+ if ($cmp eq "==") {
+ return $lval eq $rval;
+ } elsif ($cmp eq "!=") {
+ return $lval ne $rval;
+ } elsif ($cmp eq "=~") {
+ return $lval =~ m/$rval/;
+ } elsif ($cmp eq "!~") {
+ return $lval !~ m/$rval/;
+ }
+
+ my $statement = "$lval $cmp $rval";
+ my $ret = eval $statement;
+
+ # $@ stores error of eval
+ if ($@) {
+ return -1;
+ }
+
+ return $ret;
+}
+
+sub value_defined {
+ my ($val) = @_;
+
+ return defined($variable{$2}) ||
+ defined($opt{$2});
+}
+
+my $d = 0;
+sub process_expression {
+ my ($name, $val) = @_;
+
+ my $c = $d++;
+
+ while ($val =~ s/\(([^\(]*?)\)/\&\&\&\&VAL\&\&\&\&/) {
+ my $express = $1;
+
+ if (process_expression($name, $express)) {
+ $val =~ s/\&\&\&\&VAL\&\&\&\&/ 1 /;
+ } else {
+ $val =~ s/\&\&\&\&VAL\&\&\&\&/ 0 /;
+ }
+ }
+
+ $d--;
+ my $OR = "\\|\\|";
+ my $AND = "\\&\\&";
+
+ while ($val =~ s/^(.*?)($OR|$AND)//) {
+ my $express = $1;
+ my $op = $2;
+
+ if (process_expression($name, $express)) {
+ if ($op eq "||") {
+ return 1;
+ }
+ } else {
+ if ($op eq "&&") {
+ return 0;
+ }
+ }
+ }
+
+ if ($val =~ /(.*)(==|\!=|>=|<=|>|<|=~|\!~)(.*)/) {
+ my $ret = process_compare($1, $2, $3);
+ if ($ret < 0) {
+ die "$name: $.: Unable to process comparison\n";
+ }
+ return $ret;
+ }
+
+ if ($val =~ /^\s*(NOT\s*)?DEFINED\s+(\S+)\s*$/) {
+ if (defined $1) {
+ return !value_defined($2);
+ } else {
+ return value_defined($2);
+ }
+ }
+
+ if ($val =~ /^\s*0\s*$/) {
+ return 0;
+ } elsif ($val =~ /^\s*\d+\s*$/) {
+ return 1;
+ }
+
+ die ("$name: $.: Undefined content $val in if statement\n");
+}
+
+sub process_if {
+ my ($name, $value) = @_;
+
+ # Convert variables and replace undefined ones with 0
+ my $val = process_variables($value, 1);
+ my $ret = process_expression $name, $val;
+
+ return $ret;
+}
+
+sub __read_config {
+ my ($config, $current_test_num) = @_;
+
+ my $in;
+ open($in, $config) || die "can't read file $config";
+
+ my $name = $config;
+ $name =~ s,.*/(.*),$1,;
+
+ my $test_num = $$current_test_num;
+ my $default = 1;
+ my $repeat = 1;
+ my $num_tests_set = 0;
+ my $skip = 0;
+ my $rest;
+ my $line;
+ my $test_case = 0;
+ my $if = 0;
+ my $if_set = 0;
+ my $override = 0;
+
+ my %overrides;
+
+ while (<$in>) {
+
+ # ignore blank lines and comments
+ next if (/^\s*$/ || /\s*\#/);
+
+ if (/^\s*(TEST_START|DEFAULTS)\b(.*)/) {
+
+ my $type = $1;
+ $rest = $2;
+ $line = $2;
+
+ my $old_test_num;
+ my $old_repeat;
+ $override = 0;
+
+ if ($type eq "TEST_START") {
+
+ if ($num_tests_set) {
+ die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
+ }
+
+ $old_test_num = $test_num;
+ $old_repeat = $repeat;
+
+ $test_num += $repeat;
+ $default = 0;
+ $repeat = 1;
+ } else {
+ $default = 1;
+ }
+
+ # If SKIP is anywhere in the line, the command will be skipped
+ if ($rest =~ s/\s+SKIP\b//) {
+ $skip = 1;
+ } else {
+ $test_case = 1;
+ $skip = 0;
+ }
+
+ if ($rest =~ s/\sELSE\b//) {
+ if (!$if) {
+ die "$name: $.: ELSE found with out matching IF section\n$_";
+ }
+ $if = 0;
+
+ if ($if_set) {
+ $skip = 1;
+ } else {
+ $skip = 0;
+ }
+ }
+
+ if ($rest =~ s/\sIF\s+(.*)//) {
+ if (process_if($name, $1)) {
+ $if_set = 1;
+ } else {
+ $skip = 1;
+ }
+ $if = 1;
+ } else {
+ $if = 0;
+ $if_set = 0;
+ }
+
+ if (!$skip) {
+ if ($type eq "TEST_START") {
+ if ($rest =~ s/\s+ITERATE\s+(\d+)//) {
+ $repeat = $1;
+ $repeat_tests{"$test_num"} = $repeat;
+ }
+ } elsif ($rest =~ s/\sOVERRIDE\b//) {
+ # DEFAULT only
+ $override = 1;
+ # Clear previous overrides
+ %overrides = ();
+ }
+ }
+
+ if (!$skip && $rest !~ /^\s*$/) {
+ die "$name: $.: Gargbage found after $type\n$_";
+ }
+
+ if ($skip && $type eq "TEST_START") {
+ $test_num = $old_test_num;
+ $repeat = $old_repeat;
+ }
+
+ } elsif (/^\s*ELSE\b(.*)$/) {
+ if (!$if) {
+ die "$name: $.: ELSE found with out matching IF section\n$_";
+ }
+ $rest = $1;
+ if ($if_set) {
+ $skip = 1;
+ $rest = "";
+ } else {
+ $skip = 0;
+
+ if ($rest =~ /\sIF\s+(.*)/) {
+ # May be a ELSE IF section.
+ if (process_if($name, $1)) {
+ $if_set = 1;
+ } else {
+ $skip = 1;
+ }
+ $rest = "";
+ } else {
+ $if = 0;
+ }
+ }
+
+ if ($rest !~ /^\s*$/) {
+ die "$name: $.: Gargbage found after DEFAULTS\n$_";
+ }
+
+ } elsif (/^\s*INCLUDE\s+(\S+)/) {
+
+ next if ($skip);
+
+ if (!$default) {
+ die "$name: $.: INCLUDE can only be done in default sections\n$_";
+ }
+
+ my $file = process_variables($1);
+
+ if ($file !~ m,^/,) {
+ # check the path of the config file first
+ if ($config =~ m,(.*)/,) {
+ if (-f "$1/$file") {
+ $file = "$1/$file";
+ }
+ }
+ }
+
+ if ( ! -r $file ) {
+ die "$name: $.: Can't read file $file\n$_";
+ }
+
+ if (__read_config($file, \$test_num)) {
+ $test_case = 1;
+ }
+
+ } elsif (/^\s*([A-Z_\[\]\d]+)\s*=~\s*(.*?)\s*$/) {
+
+ next if ($skip);
+
+ my $lvalue = $1;
+ my $rvalue = $2;
+
+ if ($default || $lvalue =~ /\[\d+\]$/) {
+ set_eval($lvalue, $rvalue, $name);
+ } else {
+ my $val = "$lvalue\[$test_num\]";
+ set_eval($val, $rvalue, $name);
+ }
+
+ } elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) {
+
+ next if ($skip);
+
+ my $lvalue = $1;
+ my $rvalue = $2;
+
+ if (!$default &&
+ ($lvalue eq "NUM_TESTS" ||
+ $lvalue eq "LOG_FILE" ||
+ $lvalue eq "CLEAR_LOG")) {
+ die "$name: $.: $lvalue must be set in DEFAULTS section\n";
+ }
+
+ if ($lvalue eq "NUM_TESTS") {
+ if ($test_num) {
+ die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
+ }
+ if (!$default) {
+ die "$name: $.: NUM_TESTS must be set in default section\n";
+ }
+ $num_tests_set = 1;
+ }
+
+ if ($default || $lvalue =~ /\[\d+\]$/) {
+ set_value($lvalue, $rvalue, $override, \%overrides, $name);
+ } else {
+ my $val = "$lvalue\[$test_num\]";
+ set_value($val, $rvalue, $override, \%overrides, $name);
+
+ if ($repeat > 1) {
+ $repeats{$val} = $repeat;
+ }
+ }
+ } elsif (/^\s*([A-Z_\[\]\d]+)\s*:=\s*(.*?)\s*$/) {
+ next if ($skip);
+
+ my $lvalue = $1;
+ my $rvalue = $2;
+
+ # process config variables.
+ # Config variables are only active while reading the
+ # config and can be defined anywhere. They also ignore
+ # TEST_START and DEFAULTS, but are skipped if they are in
+ # on of these sections that have SKIP defined.
+ # The save variable can be
+ # defined multiple times and the new one simply overrides
+ # the prevous one.
+ set_variable($lvalue, $rvalue);
+
+ } else {
+ die "$name: $.: Garbage found in config\n$_";
+ }
+ }
+
+ if ($test_num) {
+ $test_num += $repeat - 1;
+ $opt{"NUM_TESTS"} = $test_num;
+ }
+
+ close($in);
+
+ $$current_test_num = $test_num;
+
+ return $test_case;
+}
+
+sub get_test_case {
+ print "What test case would you like to run?\n";
+ print " (build, install or boot)\n";
+ print " Other tests are available but require editing the config file\n";
+ my $ans = <STDIN>;
+ chomp $ans;
+ $default{"TEST_TYPE"} = $ans;
+}
+
+sub read_config {
+ my ($config) = @_;
+
+ my $test_case;
+ my $test_num = 0;
+
+ $test_case = __read_config $config, \$test_num;
+
+ # make sure we have all mandatory configs
+ get_mandatory_configs;
+
+ # was a test specified?
+ if (!$test_case) {
+ print "No test case specified.\n";
+ get_test_case;
+ }
+
+ # set any defaults
+
+ foreach my $default (keys %default) {
+ if (!defined($opt{$default})) {
+ $opt{$default} = $default{$default};
+ }
+ }
+
+ if ($opt{"IGNORE_UNUSED"} == 1) {
+ return;
+ }
+
+ my %not_used;
+
+ # check if there are any stragglers (typos?)
+ foreach my $option (keys %opt) {
+ my $op = $option;
+ # remove per test labels.
+ $op =~ s/\[.*\]//;
+ if (!exists($option_map{$op}) &&
+ !exists($default{$op}) &&
+ !exists($used_options{$op})) {
+ $not_used{$op} = 1;
+ }
+ }
+
+ if (%not_used) {
+ my $s = "s are";
+ $s = " is" if (keys %not_used == 1);
+ print "The following option$s not used; could be a typo:\n";
+ foreach my $option (keys %not_used) {
+ print "$option\n";
+ }
+ print "Set IGRNORE_UNUSED = 1 to have ktest ignore unused variables\n";
+ if (!read_yn "Do you want to continue?") {
+ exit -1;
+ }
+ }
+}
+
+sub __eval_option {
+ my ($name, $option, $i) = @_;
+
+ # Add space to evaluate the character before $
+ $option = " $option";
+ my $retval = "";
+ my $repeated = 0;
+ my $parent = 0;
+
+ foreach my $test (keys %repeat_tests) {
+ if ($i >= $test &&
+ $i < $test + $repeat_tests{$test}) {
+
+ $repeated = 1;
+ $parent = $test;
+ last;
+ }
+ }
+
+ while ($option =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) {
+ my $start = $1;
+ my $var = $2;
+ my $end = $3;
+
+ # Append beginning of line
+ $retval = "$retval$start";
+
+ # If the iteration option OPT[$i] exists, then use that.
+ # otherwise see if the default OPT (without [$i]) exists.
+
+ my $o = "$var\[$i\]";
+ my $parento = "$var\[$parent\]";
+
+ # If a variable contains itself, use the default var
+ if (($var eq $name) && defined($opt{$var})) {
+ $o = $opt{$var};
+ $retval = "$retval$o";
+ } elsif (defined($opt{$o})) {
+ $o = $opt{$o};
+ $retval = "$retval$o";
+ } elsif ($repeated && defined($opt{$parento})) {
+ $o = $opt{$parento};
+ $retval = "$retval$o";
+ } elsif (defined($opt{$var})) {
+ $o = $opt{$var};
+ $retval = "$retval$o";
+ } elsif ($var eq "KERNEL_VERSION" && defined($make)) {
+ # special option KERNEL_VERSION uses kernel version
+ get_version();
+ $retval = "$retval$version";
+ } else {
+ $retval = "$retval\$\{$var\}";
+ }
+
+ $option = $end;
+ }
+
+ $retval = "$retval$option";
+
+ $retval =~ s/^ //;
+
+ return $retval;
+}
+
+sub process_evals {
+ my ($name, $option, $i) = @_;
+
+ my $option_name = "$name\[$i\]";
+ my $ev;
+
+ my $old_option = $option;
+
+ if (defined($evals{$option_name})) {
+ $ev = $evals{$option_name};
+ } elsif (defined($evals{$name})) {
+ $ev = $evals{$name};
+ } else {
+ return $option;
+ }
+
+ for my $e (@{$ev}) {
+ eval "\$option =~ $e";
+ }
+
+ if ($option ne $old_option) {
+ doprint("$name changed from '$old_option' to '$option'\n");
+ }
+
+ return $option;
+}
+
+sub eval_option {
+ my ($name, $option, $i) = @_;
+
+ my $prev = "";
+
+ # Since an option can evaluate to another option,
+ # keep iterating until we do not evaluate any more
+ # options.
+ my $r = 0;
+ while ($prev ne $option) {
+ # Check for recursive evaluations.
+ # 100 deep should be more than enough.
+ if ($r++ > 100) {
+ die "Over 100 evaluations accurred with $option\n" .
+ "Check for recursive variables\n";
+ }
+ $prev = $option;
+ $option = __eval_option($name, $option, $i);
+ }
+
+ $option = process_evals($name, $option, $i);
+
+ return $option;
+}
+
+sub run_command;
+sub start_monitor;
+sub end_monitor;
+sub wait_for_monitor;
+
+sub reboot {
+ my ($time) = @_;
+
+ # Make sure everything has been written to disk
+ run_ssh("sync");
+
+ if (defined($time)) {
+ start_monitor;
+ # flush out current monitor
+ # May contain the reboot success line
+ wait_for_monitor 1;
+ }
+
+ # try to reboot normally
+ if (run_command $reboot) {
+ if (defined($powercycle_after_reboot)) {
+ sleep $powercycle_after_reboot;
+ run_command "$power_cycle";
+ }
+ } else {
+ # nope? power cycle it.
+ run_command "$power_cycle";
+ }
+
+ if (defined($time)) {
+
+ # We only want to get to the new kernel, don't fail
+ # if we stumble over a call trace.
+ my $save_ignore_errors = $ignore_errors;
+ $ignore_errors = 1;
+
+ # Look for the good kernel to boot
+ if (wait_for_monitor($time, "Linux version")) {
+ # reboot got stuck?
+ doprint "Reboot did not finish. Forcing power cycle\n";
+ run_command "$power_cycle";
+ }
+
+ $ignore_errors = $save_ignore_errors;
+
+ # Still need to wait for the reboot to finish
+ wait_for_monitor($time, $reboot_success_line);
+
+ end_monitor;
+ }
+}
+
+sub reboot_to_good {
+ my ($time) = @_;
+
+ if (defined($switch_to_good)) {
+ run_command $switch_to_good;
+ }
+
+ reboot $time;
+}
+
+sub do_not_reboot {
+ my $i = $iteration;
+
+ return $test_type eq "build" || $no_reboot ||
+ ($test_type eq "patchcheck" && $opt{"PATCHCHECK_TYPE[$i]"} eq "build") ||
+ ($test_type eq "bisect" && $opt{"BISECT_TYPE[$i]"} eq "build");
+}
+
+sub dodie {
+ doprint "CRITICAL FAILURE... ", @_, "\n";
+
+ my $i = $iteration;
+
+ if ($reboot_on_error && !do_not_reboot) {
+
+ doprint "REBOOTING\n";
+ reboot_to_good;
+
+ } elsif ($poweroff_on_error && defined($power_off)) {
+ doprint "POWERING OFF\n";
+ `$power_off`;
+ }
+
+ if (defined($opt{"LOG_FILE"})) {
+ print " See $opt{LOG_FILE} for more info.\n";
+ }
+
+ if ($monitor_cnt) {
+ # restore terminal settings
+ system("stty $stty_orig");
+ }
+
+ die @_, "\n";
+}
+
+sub create_pty {
+ my ($ptm, $pts) = @_;
+ my $tmp;
+ my $TIOCSPTLCK = 0x40045431;
+ my $TIOCGPTN = 0x80045430;
+
+ sysopen($ptm, "/dev/ptmx", O_RDWR | O_NONBLOCK) or
+ dodie "Cant open /dev/ptmx";
+
+ # unlockpt()
+ $tmp = pack("i", 0);
+ ioctl($ptm, $TIOCSPTLCK, $tmp) or
+ dodie "ioctl TIOCSPTLCK for /dev/ptmx failed";
+
+ # ptsname()
+ ioctl($ptm, $TIOCGPTN, $tmp) or
+ dodie "ioctl TIOCGPTN for /dev/ptmx failed";
+ $tmp = unpack("i", $tmp);
+
+ sysopen($pts, "/dev/pts/$tmp", O_RDWR | O_NONBLOCK) or
+ dodie "Can't open /dev/pts/$tmp";
+}
+
+sub exec_console {
+ my ($ptm, $pts) = @_;
+
+ close($ptm);
+
+ close(\*STDIN);
+ close(\*STDOUT);
+ close(\*STDERR);
+
+ open(\*STDIN, '<&', $pts);
+ open(\*STDOUT, '>&', $pts);
+ open(\*STDERR, '>&', $pts);
+
+ close($pts);
+
+ exec $console or
+ die "Can't open console $console";
+}
+
+sub open_console {
+ my ($ptm) = @_;
+ my $pts = \*PTSFD;
+ my $pid;
+
+ # save terminal settings
+ $stty_orig = `stty -g`;
+
+ # place terminal in cbreak mode so that stdin can be read one character at
+ # a time without having to wait for a newline
+ system("stty -icanon -echo -icrnl");
+
+ create_pty($ptm, $pts);
+
+ $pid = fork;
+
+ if (!$pid) {
+ # child
+ exec_console($ptm, $pts)
+ }
+
+ # parent
+ close($pts);
+
+ return $pid;
+
+ open(PTSFD, "Stop perl from warning about single use of PTSFD");
+}
+
+sub close_console {
+ my ($fp, $pid) = @_;
+
+ doprint "kill child process $pid\n";
+ kill $close_console_signal, $pid;
+
+ print "closing!\n";
+ close($fp);
+
+ # restore terminal settings
+ system("stty $stty_orig");
+}
+
+sub start_monitor {
+ if ($monitor_cnt++) {
+ return;
+ }
+ $monitor_fp = \*MONFD;
+ $monitor_pid = open_console $monitor_fp;
+
+ return;
+
+ open(MONFD, "Stop perl from warning about single use of MONFD");
+}
+
+sub end_monitor {
+ return if (!defined $console);
+ if (--$monitor_cnt) {
+ return;
+ }
+ close_console($monitor_fp, $monitor_pid);
+}
+
+sub wait_for_monitor {
+ my ($time, $stop) = @_;
+ my $full_line = "";
+ my $line;
+ my $booted = 0;
+ my $start_time = time;
+ my $skip_call_trace = 0;
+ my $bug = 0;
+ my $bug_ignored = 0;
+ my $now;
+
+ doprint "** Wait for monitor to settle down **\n";
+
+ # read the monitor and wait for the system to calm down
+ while (!$booted) {
+ $line = wait_for_input($monitor_fp, $time);
+ last if (!defined($line));
+ print "$line";
+ $full_line .= $line;
+
+ if (defined($stop) && $full_line =~ /$stop/) {
+ doprint "wait for monitor detected $stop\n";
+ $booted = 1;
+ }
+
+ if ($full_line =~ /\[ backtrace testing \]/) {
+ $skip_call_trace = 1;
+ }
+
+ if ($full_line =~ /call trace:/i) {
+ if (!$bug && !$skip_call_trace) {
+ if ($ignore_errors) {
+ $bug_ignored = 1;
+ } else {
+ $bug = 1;
+ }
+ }
+ }
+
+ if ($full_line =~ /\[ end of backtrace testing \]/) {
+ $skip_call_trace = 0;
+ }
+
+ if ($full_line =~ /Kernel panic -/) {
+ $bug = 1;
+ }
+
+ if ($line =~ /\n/) {
+ $full_line = "";
+ }
+ $now = time;
+ if ($now - $start_time >= $max_monitor_wait) {
+ doprint "Exiting monitor flush due to hitting MAX_MONITOR_WAIT\n";
+ return 1;
+ }
+ }
+ print "** Monitor flushed **\n";
+
+ # if stop is defined but wasn't hit, return error
+ # used by reboot (which wants to see a reboot)
+ if (defined($stop) && !$booted) {
+ $bug = 1;
+ }
+ return $bug;
+}
+
+sub save_logs {
+ my ($result, $basedir) = @_;
+ my @t = localtime;
+ my $date = sprintf "%04d%02d%02d%02d%02d%02d",
+ 1900+$t[5],$t[4],$t[3],$t[2],$t[1],$t[0];
+
+ my $type = $build_type;
+ if ($type =~ /useconfig/) {
+ $type = "useconfig";
+ }
+
+ my $dir = "$machine-$test_type-$type-$result-$date";
+
+ $dir = "$basedir/$dir";
+
+ if (!-d $dir) {
+ mkpath($dir) or
+ die "can't create $dir";
+ }
+
+ my %files = (
+ "config" => $output_config,
+ "buildlog" => $buildlog,
+ "dmesg" => $dmesg,
+ "testlog" => $testlog,
+ );
+
+ while (my ($name, $source) = each(%files)) {
+ if (-f "$source") {
+ cp "$source", "$dir/$name" or
+ die "failed to copy $source";
+ }
+ }
+
+ doprint "*** Saved info to $dir ***\n";
+}
+
+sub fail {
+
+ if (defined($post_test)) {
+ run_command $post_test;
+ }
+
+ if ($die_on_failure) {
+ dodie @_;
+ }
+
+ doprint "FAILED\n";
+
+ my $i = $iteration;
+
+ # no need to reboot for just building.
+ if (!do_not_reboot) {
+ doprint "REBOOTING\n";
+ reboot_to_good $sleep_time;
+ }
+
+ my $name = "";
+
+ if (defined($test_name)) {
+ $name = " ($test_name)";
+ }
+
+ print_times;
+
+ doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+ doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+ doprint "KTEST RESULT: TEST $i$name Failed: ", @_, "\n";
+ doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+ doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+
+ if (defined($store_failures)) {
+ save_logs "fail", $store_failures;
+ }
+
+ return 1;
+}
+
+sub run_command {
+ my ($command, $redirect) = @_;
+ my $start_time;
+ my $end_time;
+ my $dolog = 0;
+ my $dord = 0;
+ my $pid;
+
+ $start_time = time;
+
+ $command =~ s/\$SSH_USER/$ssh_user/g;
+ $command =~ s/\$MACHINE/$machine/g;
+
+ doprint("$command ... ");
+
+ $pid = open(CMD, "$command 2>&1 |") or
+ (fail "unable to exec $command" and return 0);
+
+ if (defined($opt{"LOG_FILE"})) {
+ open(LOG, ">>$opt{LOG_FILE}") or
+ dodie "failed to write to log";
+ $dolog = 1;
+ }
+
+ if (defined($redirect)) {
+ open (RD, ">$redirect") or
+ dodie "failed to write to redirect $redirect";
+ $dord = 1;
+ }
+
+ while (<CMD>) {
+ print LOG if ($dolog);
+ print RD if ($dord);
+ }
+
+ waitpid($pid, 0);
+ my $failed = $?;
+
+ close(CMD);
+ close(LOG) if ($dolog);
+ close(RD) if ($dord);
+
+ $end_time = time;
+ my $delta = $end_time - $start_time;
+
+ if ($delta == 1) {
+ doprint "[1 second] ";
+ } else {
+ doprint "[$delta seconds] ";
+ }
+
+ if ($failed) {
+ doprint "FAILED!\n";
+ } else {
+ doprint "SUCCESS\n";
+ }
+
+ return !$failed;
+}
+
+sub run_ssh {
+ my ($cmd) = @_;
+ my $cp_exec = $ssh_exec;
+
+ $cp_exec =~ s/\$SSH_COMMAND/$cmd/g;
+ return run_command "$cp_exec";
+}
+
+sub run_scp {
+ my ($src, $dst, $cp_scp) = @_;
+
+ $cp_scp =~ s/\$SRC_FILE/$src/g;
+ $cp_scp =~ s/\$DST_FILE/$dst/g;
+
+ return run_command "$cp_scp";
+}
+
+sub run_scp_install {
+ my ($src, $dst) = @_;
+
+ my $cp_scp = $scp_to_target_install;
+
+ return run_scp($src, $dst, $cp_scp);
+}
+
+sub run_scp_mod {
+ my ($src, $dst) = @_;
+
+ my $cp_scp = $scp_to_target;
+
+ return run_scp($src, $dst, $cp_scp);
+}
+
+sub get_grub2_index {
+
+ return if (defined($grub_number) && defined($last_grub_menu) &&
+ $last_grub_menu eq $grub_menu && defined($last_machine) &&
+ $last_machine eq $machine);
+
+ doprint "Find grub2 menu ... ";
+ $grub_number = -1;
+
+ my $ssh_grub = $ssh_exec;
+ $ssh_grub =~ s,\$SSH_COMMAND,cat $grub_file,g;
+
+ open(IN, "$ssh_grub |")
+ or die "unable to get $grub_file";
+
+ my $found = 0;
+
+ while (<IN>) {
+ if (/^menuentry.*$grub_menu/) {
+ $grub_number++;
+ $found = 1;
+ last;
+ } elsif (/^menuentry\s/) {
+ $grub_number++;
+ }
+ }
+ close(IN);
+
+ die "Could not find '$grub_menu' in $grub_file on $machine"
+ if (!$found);
+ doprint "$grub_number\n";
+ $last_grub_menu = $grub_menu;
+ $last_machine = $machine;
+}
+
+sub get_grub_index {
+
+ if ($reboot_type eq "grub2") {
+ get_grub2_index;
+ return;
+ }
+
+ if ($reboot_type ne "grub") {
+ return;
+ }
+ return if (defined($grub_number) && defined($last_grub_menu) &&
+ $last_grub_menu eq $grub_menu && defined($last_machine) &&
+ $last_machine eq $machine);
+
+ doprint "Find grub menu ... ";
+ $grub_number = -1;
+
+ my $ssh_grub = $ssh_exec;
+ $ssh_grub =~ s,\$SSH_COMMAND,cat /boot/grub/menu.lst,g;
+
+ open(IN, "$ssh_grub |")
+ or die "unable to get menu.lst";
+
+ my $found = 0;
+
+ while (<IN>) {
+ if (/^\s*title\s+$grub_menu\s*$/) {
+ $grub_number++;
+ $found = 1;
+ last;
+ } elsif (/^\s*title\s/) {
+ $grub_number++;
+ }
+ }
+ close(IN);
+
+ die "Could not find '$grub_menu' in /boot/grub/menu on $machine"
+ if (!$found);
+ doprint "$grub_number\n";
+ $last_grub_menu = $grub_menu;
+ $last_machine = $machine;
+}
+
+sub wait_for_input
+{
+ my ($fp, $time) = @_;
+ my $rin;
+ my $rout;
+ my $nr;
+ my $buf;
+ my $line;
+ my $ch;
+
+ if (!defined($time)) {
+ $time = $timeout;
+ }
+
+ $rin = '';
+ vec($rin, fileno($fp), 1) = 1;
+ vec($rin, fileno(\*STDIN), 1) = 1;
+
+ while (1) {
+ $nr = select($rout=$rin, undef, undef, $time);
+
+ if ($nr <= 0) {
+ return undef;
+ }
+
+ # copy data from stdin to the console
+ if (vec($rout, fileno(\*STDIN), 1) == 1) {
+ sysread(\*STDIN, $buf, 1000);
+ syswrite($fp, $buf, 1000);
+ next;
+ }
+
+ $line = "";
+
+ # try to read one char at a time
+ while (sysread $fp, $ch, 1) {
+ $line .= $ch;
+ last if ($ch eq "\n");
+ }
+
+ if (!length($line)) {
+ return undef;
+ }
+
+ return $line;
+ }
+}
+
+sub reboot_to {
+ if (defined($switch_to_test)) {
+ run_command $switch_to_test;
+ }
+
+ if ($reboot_type eq "grub") {
+ run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'";
+ } elsif ($reboot_type eq "grub2") {
+ run_ssh "$grub_reboot $grub_number";
+ } elsif ($reboot_type eq "syslinux") {
+ run_ssh "$syslinux --once \\\"$syslinux_label\\\" $syslinux_path";
+ } elsif (defined $reboot_script) {
+ run_command "$reboot_script";
+ }
+ reboot;
+}
+
+sub get_sha1 {
+ my ($commit) = @_;
+
+ doprint "git rev-list --max-count=1 $commit ... ";
+ my $sha1 = `git rev-list --max-count=1 $commit`;
+ my $ret = $?;
+
+ logit $sha1;
+
+ if ($ret) {
+ doprint "FAILED\n";
+ dodie "Failed to get git $commit";
+ }
+
+ print "SUCCESS\n";
+
+ chomp $sha1;
+
+ return $sha1;
+}
+
+sub monitor {
+ my $booted = 0;
+ my $bug = 0;
+ my $bug_ignored = 0;
+ my $skip_call_trace = 0;
+ my $loops;
+
+ my $start_time = time;
+
+ wait_for_monitor 5;
+
+ my $line;
+ my $full_line = "";
+
+ open(DMESG, "> $dmesg") or
+ die "unable to write to $dmesg";
+
+ reboot_to;
+
+ my $success_start;
+ my $failure_start;
+ my $monitor_start = time;
+ my $done = 0;
+ my $version_found = 0;
+
+ while (!$done) {
+
+ if ($bug && defined($stop_after_failure) &&
+ $stop_after_failure >= 0) {
+ my $time = $stop_after_failure - (time - $failure_start);
+ $line = wait_for_input($monitor_fp, $time);
+ if (!defined($line)) {
+ doprint "bug timed out after $booted_timeout seconds\n";
+ doprint "Test forced to stop after $stop_after_failure seconds after failure\n";
+ last;
+ }
+ } elsif ($booted) {
+ $line = wait_for_input($monitor_fp, $booted_timeout);
+ if (!defined($line)) {
+ my $s = $booted_timeout == 1 ? "" : "s";
+ doprint "Successful boot found: break after $booted_timeout second$s\n";
+ last;
+ }
+ } else {
+ $line = wait_for_input($monitor_fp);
+ if (!defined($line)) {
+ my $s = $timeout == 1 ? "" : "s";
+ doprint "Timed out after $timeout second$s\n";
+ last;
+ }
+ }
+
+ doprint $line;
+ print DMESG $line;
+
+ # we are not guaranteed to get a full line
+ $full_line .= $line;
+
+ if ($full_line =~ /$success_line/) {
+ $booted = 1;
+ $success_start = time;
+ }
+
+ if ($booted && defined($stop_after_success) &&
+ $stop_after_success >= 0) {
+ my $now = time;
+ if ($now - $success_start >= $stop_after_success) {
+ doprint "Test forced to stop after $stop_after_success seconds after success\n";
+ last;
+ }
+ }
+
+ if ($full_line =~ /\[ backtrace testing \]/) {
+ $skip_call_trace = 1;
+ }
+
+ if ($full_line =~ /call trace:/i) {
+ if (!$bug && !$skip_call_trace) {
+ if ($ignore_errors) {
+ $bug_ignored = 1;
+ } else {
+ $bug = 1;
+ $failure_start = time;
+ }
+ }
+ }
+
+ if ($bug && defined($stop_after_failure) &&
+ $stop_after_failure >= 0) {
+ my $now = time;
+ if ($now - $failure_start >= $stop_after_failure) {
+ doprint "Test forced to stop after $stop_after_failure seconds after failure\n";
+ last;
+ }
+ }
+
+ if ($full_line =~ /\[ end of backtrace testing \]/) {
+ $skip_call_trace = 0;
+ }
+
+ if ($full_line =~ /Kernel panic -/) {
+ $failure_start = time;
+ $bug = 1;
+ }
+
+ # Detect triple faults by testing the banner
+ if ($full_line =~ /\bLinux version (\S+).*\n/) {
+ if ($1 eq $version) {
+ $version_found = 1;
+ } elsif ($version_found && $detect_triplefault) {
+ # We already booted into the kernel we are testing,
+ # but now we booted into another kernel?
+ # Consider this a triple fault.
+ doprint "Already booted in Linux kernel $version, but now\n";
+ doprint "we booted into Linux kernel $1.\n";
+ doprint "Assuming that this is a triple fault.\n";
+ doprint "To disable this: set DETECT_TRIPLE_FAULT to 0\n";
+ last;
+ }
+ }
+
+ if ($line =~ /\n/) {
+ $full_line = "";
+ }
+
+ if ($stop_test_after > 0 && !$booted && !$bug) {
+ if (time - $monitor_start > $stop_test_after) {
+ doprint "STOP_TEST_AFTER ($stop_test_after seconds) timed out\n";
+ $done = 1;
+ }
+ }
+ }
+
+ my $end_time = time;
+ $reboot_time = $end_time - $start_time;
+
+ close(DMESG);
+
+ if ($bug) {
+ return 0 if ($in_bisect);
+ fail "failed - got a bug report" and return 0;
+ }
+
+ if (!$booted) {
+ return 0 if ($in_bisect);
+ fail "failed - never got a boot prompt." and return 0;
+ }
+
+ if ($bug_ignored) {
+ doprint "WARNING: Call Trace detected but ignored due to IGNORE_ERRORS=1\n";
+ }
+
+ return 1;
+}
+
+sub eval_kernel_version {
+ my ($option) = @_;
+
+ $option =~ s/\$KERNEL_VERSION/$version/g;
+
+ return $option;
+}
+
+sub do_post_install {
+
+ return if (!defined($post_install));
+
+ my $cp_post_install = eval_kernel_version $post_install;
+ run_command "$cp_post_install" or
+ dodie "Failed to run post install";
+}
+
+# Sometimes the reboot fails, and will hang. We try to ssh to the box
+# and if we fail, we force another reboot, that should powercycle it.
+sub test_booted {
+ if (!run_ssh "echo testing connection") {
+ reboot $sleep_time;
+ }
+}
+
+sub install {
+
+ return if ($no_install);
+
+ my $start_time = time;
+
+ if (defined($pre_install)) {
+ my $cp_pre_install = eval_kernel_version $pre_install;
+ run_command "$cp_pre_install" or
+ dodie "Failed to run pre install";
+ }
+
+ my $cp_target = eval_kernel_version $target_image;
+
+ test_booted;
+
+ run_scp_install "$outputdir/$build_target", "$cp_target" or
+ dodie "failed to copy image";
+
+ my $install_mods = 0;
+
+ # should we process modules?
+ $install_mods = 0;
+ open(IN, "$output_config") or dodie("Can't read config file");
+ while (<IN>) {
+ if (/CONFIG_MODULES(=y)?/) {
+ if (defined($1)) {
+ $install_mods = 1;
+ last;
+ }
+ }
+ }
+ close(IN);
+
+ if (!$install_mods) {
+ do_post_install;
+ doprint "No modules needed\n";
+ my $end_time = time;
+ $install_time = $end_time - $start_time;
+ return;
+ }
+
+ run_command "$make INSTALL_MOD_STRIP=1 INSTALL_MOD_PATH=$tmpdir modules_install" or
+ dodie "Failed to install modules";
+
+ my $modlib = "/lib/modules/$version";
+ my $modtar = "ktest-mods.tar.bz2";
+
+ run_ssh "rm -rf $modlib" or
+ dodie "failed to remove old mods: $modlib";
+
+ # would be nice if scp -r did not follow symbolic links
+ run_command "cd $tmpdir && tar -cjf $modtar lib/modules/$version" or
+ dodie "making tarball";
+
+ run_scp_mod "$tmpdir/$modtar", "/tmp" or
+ dodie "failed to copy modules";
+
+ unlink "$tmpdir/$modtar";
+
+ run_ssh "'(cd / && tar xjf /tmp/$modtar)'" or
+ dodie "failed to tar modules";
+
+ run_ssh "rm -f /tmp/$modtar";
+
+ do_post_install;
+
+ my $end_time = time;
+ $install_time = $end_time - $start_time;
+}
+
+sub get_version {
+ # get the release name
+ return if ($have_version);
+ doprint "$make kernelrelease ... ";
+ $version = `$make -s kernelrelease | tail -1`;
+ chomp($version);
+ doprint "$version\n";
+ $have_version = 1;
+}
+
+sub start_monitor_and_install {
+ # Make sure the stable kernel has finished booting
+
+ # Install bisects, don't need console
+ if (defined $console) {
+ start_monitor;
+ wait_for_monitor 5;
+ end_monitor;
+ }
+
+ get_grub_index;
+ get_version;
+ install;
+
+ start_monitor if (defined $console);
+ return monitor;
+}
+
+my $check_build_re = ".*:.*(warning|error|Error):.*";
+my $utf8_quote = "\\x{e2}\\x{80}(\\x{98}|\\x{99})";
+
+sub process_warning_line {
+ my ($line) = @_;
+
+ chomp $line;
+
+ # for distcc heterogeneous systems, some compilers
+ # do things differently causing warning lines
+ # to be slightly different. This makes an attempt
+ # to fixe those issues.
+
+ # chop off the index into the line
+ # using distcc, some compilers give different indexes
+ # depending on white space
+ $line =~ s/^(\s*\S+:\d+:)\d+/$1/;
+
+ # Some compilers use UTF-8 extended for quotes and some don't.
+ $line =~ s/$utf8_quote/'/g;
+
+ return $line;
+}
+
+# Read buildlog and check against warnings file for any
+# new warnings.
+#
+# Returns 1 if OK
+# 0 otherwise
+sub check_buildlog {
+ return 1 if (!defined $warnings_file);
+
+ my %warnings_list;
+
+ # Failed builds should not reboot the target
+ my $save_no_reboot = $no_reboot;
+ $no_reboot = 1;
+
+ if (-f $warnings_file) {
+ open(IN, $warnings_file) or
+ dodie "Error opening $warnings_file";
+
+ while (<IN>) {
+ if (/$check_build_re/) {
+ my $warning = process_warning_line $_;
+
+ $warnings_list{$warning} = 1;
+ }
+ }
+ close(IN);
+ }
+
+ # If warnings file didn't exist, and WARNINGS_FILE exist,
+ # then we fail on any warning!
+
+ open(IN, $buildlog) or dodie "Can't open $buildlog";
+ while (<IN>) {
+ if (/$check_build_re/) {
+ my $warning = process_warning_line $_;
+
+ if (!defined $warnings_list{$warning}) {
+ fail "New warning found (not in $warnings_file)\n$_\n";
+ $no_reboot = $save_no_reboot;
+ return 0;
+ }
+ }
+ }
+ $no_reboot = $save_no_reboot;
+ close(IN);
+}
+
+sub check_patch_buildlog {
+ my ($patch) = @_;
+
+ my @files = `git show $patch | diffstat -l`;
+
+ foreach my $file (@files) {
+ chomp $file;
+ }
+
+ open(IN, "git show $patch |") or
+ dodie "failed to show $patch";
+ while (<IN>) {
+ if (m,^--- a/(.*),) {
+ chomp $1;
+ $files[$#files] = $1;
+ }
+ }
+ close(IN);
+
+ open(IN, $buildlog) or dodie "Can't open $buildlog";
+ while (<IN>) {
+ if (/^\s*(.*?):.*(warning|error)/) {
+ my $err = $1;
+ foreach my $file (@files) {
+ my $fullpath = "$builddir/$file";
+ if ($file eq $err || $fullpath eq $err) {
+ fail "$file built with warnings" and return 0;
+ }
+ }
+ }
+ }
+ close(IN);
+
+ return 1;
+}
+
+sub apply_min_config {
+ my $outconfig = "$output_config.new";
+
+ # Read the config file and remove anything that
+ # is in the force_config hash (from minconfig and others)
+ # then add the force config back.
+
+ doprint "Applying minimum configurations into $output_config.new\n";
+
+ open (OUT, ">$outconfig") or
+ dodie "Can't create $outconfig";
+
+ if (-f $output_config) {
+ open (IN, $output_config) or
+ dodie "Failed to open $output_config";
+ while (<IN>) {
+ if (/^(# )?(CONFIG_[^\s=]*)/) {
+ next if (defined($force_config{$2}));
+ }
+ print OUT;
+ }
+ close IN;
+ }
+ foreach my $config (keys %force_config) {
+ print OUT "$force_config{$config}\n";
+ }
+ close OUT;
+
+ run_command "mv $outconfig $output_config";
+}
+
+sub make_oldconfig {
+
+ my @force_list = keys %force_config;
+
+ if ($#force_list >= 0) {
+ apply_min_config;
+ }
+
+ if (!run_command "$make olddefconfig") {
+ # Perhaps olddefconfig doesn't exist in this version of the kernel
+ # try oldnoconfig
+ doprint "olddefconfig failed, trying make oldnoconfig\n";
+ if (!run_command "$make oldnoconfig") {
+ doprint "oldnoconfig failed, trying yes '' | make oldconfig\n";
+ # try a yes '' | oldconfig
+ run_command "yes '' | $make oldconfig" or
+ dodie "failed make config oldconfig";
+ }
+ }
+}
+
+# read a config file and use this to force new configs.
+sub load_force_config {
+ my ($config) = @_;
+
+ doprint "Loading force configs from $config\n";
+ open(IN, $config) or
+ dodie "failed to read $config";
+ while (<IN>) {
+ chomp;
+ if (/^(CONFIG[^\s=]*)(\s*=.*)/) {
+ $force_config{$1} = $_;
+ } elsif (/^# (CONFIG_\S*) is not set/) {
+ $force_config{$1} = $_;
+ }
+ }
+ close IN;
+}
+
+sub build {
+ my ($type) = @_;
+
+ unlink $buildlog;
+
+ my $start_time = time;
+
+ # Failed builds should not reboot the target
+ my $save_no_reboot = $no_reboot;
+ $no_reboot = 1;
+
+ # Calculate a new version from here.
+ $have_version = 0;
+
+ if (defined($pre_build)) {
+ my $ret = run_command $pre_build;
+ if (!$ret && defined($pre_build_die) &&
+ $pre_build_die) {
+ dodie "failed to pre_build\n";
+ }
+ }
+
+ if ($type =~ /^useconfig:(.*)/) {
+ run_command "cp $1 $output_config" or
+ dodie "could not copy $1 to .config";
+
+ $type = "oldconfig";
+ }
+
+ # old config can ask questions
+ if ($type eq "oldconfig") {
+ $type = "olddefconfig";
+
+ # allow for empty configs
+ run_command "touch $output_config";
+
+ if (!$noclean) {
+ run_command "mv $output_config $outputdir/config_temp" or
+ dodie "moving .config";
+
+ run_command "$make mrproper" or dodie "make mrproper";
+
+ run_command "mv $outputdir/config_temp $output_config" or
+ dodie "moving config_temp";
+ }
+
+ } elsif (!$noclean) {
+ unlink "$output_config";
+ run_command "$make mrproper" or
+ dodie "make mrproper";
+ }
+
+ # add something to distinguish this build
+ open(OUT, "> $outputdir/localversion") or dodie("Can't make localversion file");
+ print OUT "$localversion\n";
+ close(OUT);
+
+ if (defined($minconfig)) {
+ load_force_config($minconfig);
+ }
+
+ if ($type ne "olddefconfig") {
+ run_command "$make $type" or
+ dodie "failed make config";
+ }
+ # Run old config regardless, to enforce min configurations
+ make_oldconfig;
+
+ my $build_ret = run_command "$make $build_options", $buildlog;
+
+ if (defined($post_build)) {
+ # Because a post build may change the kernel version
+ # do it now.
+ get_version;
+ my $ret = run_command $post_build;
+ if (!$ret && defined($post_build_die) &&
+ $post_build_die) {
+ dodie "failed to post_build\n";
+ }
+ }
+
+ if (!$build_ret) {
+ # bisect may need this to pass
+ if ($in_bisect) {
+ $no_reboot = $save_no_reboot;
+ return 0;
+ }
+ fail "failed build" and return 0;
+ }
+
+ $no_reboot = $save_no_reboot;
+
+ my $end_time = time;
+ $build_time = $end_time - $start_time;
+
+ return 1;
+}
+
+sub halt {
+ if (!run_ssh "halt" or defined($power_off)) {
+ if (defined($poweroff_after_halt)) {
+ sleep $poweroff_after_halt;
+ run_command "$power_off";
+ }
+ } else {
+ # nope? the zap it!
+ run_command "$power_off";
+ }
+}
+
+sub success {
+ my ($i) = @_;
+
+ if (defined($post_test)) {
+ run_command $post_test;
+ }
+
+ $successes++;
+
+ my $name = "";
+
+ if (defined($test_name)) {
+ $name = " ($test_name)";
+ }
+
+ print_times;
+
+ doprint "\n\n*******************************************\n";
+ doprint "*******************************************\n";
+ doprint "KTEST RESULT: TEST $i$name SUCCESS!!!! **\n";
+ doprint "*******************************************\n";
+ doprint "*******************************************\n";
+
+ if (defined($store_successes)) {
+ save_logs "success", $store_successes;
+ }
+
+ if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) {
+ doprint "Reboot and wait $sleep_time seconds\n";
+ reboot_to_good $sleep_time;
+ }
+}
+
+sub answer_bisect {
+ for (;;) {
+ doprint "Pass, fail, or skip? [p/f/s]";
+ my $ans = <STDIN>;
+ chomp $ans;
+ if ($ans eq "p" || $ans eq "P") {
+ return 1;
+ } elsif ($ans eq "f" || $ans eq "F") {
+ return 0;
+ } elsif ($ans eq "s" || $ans eq "S") {
+ return -1;
+ } else {
+ print "Please answer 'p', 'f', or 's'\n";
+ }
+ }
+}
+
+sub child_run_test {
+ my $failed = 0;
+
+ # child should have no power
+ $reboot_on_error = 0;
+ $poweroff_on_error = 0;
+ $die_on_failure = 1;
+
+ run_command $run_test, $testlog or $failed = 1;
+
+ exit $failed;
+}
+
+my $child_done;
+
+sub child_finished {
+ $child_done = 1;
+}
+
+sub do_run_test {
+ my $child_pid;
+ my $child_exit;
+ my $line;
+ my $full_line;
+ my $bug = 0;
+ my $bug_ignored = 0;
+
+ my $start_time = time;
+
+ wait_for_monitor 1;
+
+ doprint "run test $run_test\n";
+
+ $child_done = 0;
+
+ $SIG{CHLD} = qw(child_finished);
+
+ $child_pid = fork;
+
+ child_run_test if (!$child_pid);
+
+ $full_line = "";
+
+ do {
+ $line = wait_for_input($monitor_fp, 1);
+ if (defined($line)) {
+
+ # we are not guaranteed to get a full line
+ $full_line .= $line;
+ doprint $line;
+
+ if ($full_line =~ /call trace:/i) {
+ if ($ignore_errors) {
+ $bug_ignored = 1;
+ } else {
+ $bug = 1;
+ }
+ }
+
+ if ($full_line =~ /Kernel panic -/) {
+ $bug = 1;
+ }
+
+ if ($line =~ /\n/) {
+ $full_line = "";
+ }
+ }
+ } while (!$child_done && !$bug);
+
+ if (!$bug && $bug_ignored) {
+ doprint "WARNING: Call Trace detected but ignored due to IGNORE_ERRORS=1\n";
+ }
+
+ if ($bug) {
+ my $failure_start = time;
+ my $now;
+ do {
+ $line = wait_for_input($monitor_fp, 1);
+ if (defined($line)) {
+ doprint $line;
+ }
+ $now = time;
+ if ($now - $failure_start >= $stop_after_failure) {
+ last;
+ }
+ } while (defined($line));
+
+ doprint "Detected kernel crash!\n";
+ # kill the child with extreme prejudice
+ kill 9, $child_pid;
+ }
+
+ waitpid $child_pid, 0;
+ $child_exit = $?;
+
+ my $end_time = time;
+ $test_time = $end_time - $start_time;
+
+ if (!$bug && $in_bisect) {
+ if (defined($bisect_ret_good)) {
+ if ($child_exit == $bisect_ret_good) {
+ return 1;
+ }
+ }
+ if (defined($bisect_ret_skip)) {
+ if ($child_exit == $bisect_ret_skip) {
+ return -1;
+ }
+ }
+ if (defined($bisect_ret_abort)) {
+ if ($child_exit == $bisect_ret_abort) {
+ fail "test abort" and return -2;
+ }
+ }
+ if (defined($bisect_ret_bad)) {
+ if ($child_exit == $bisect_ret_skip) {
+ return 0;
+ }
+ }
+ if (defined($bisect_ret_default)) {
+ if ($bisect_ret_default eq "good") {
+ return 1;
+ } elsif ($bisect_ret_default eq "bad") {
+ return 0;
+ } elsif ($bisect_ret_default eq "skip") {
+ return -1;
+ } elsif ($bisect_ret_default eq "abort") {
+ return -2;
+ } else {
+ fail "unknown default action: $bisect_ret_default"
+ and return -2;
+ }
+ }
+ }
+
+ if ($bug || $child_exit) {
+ return 0 if $in_bisect;
+ fail "test failed" and return 0;
+ }
+ return 1;
+}
+
+sub run_git_bisect {
+ my ($command) = @_;
+
+ doprint "$command ... ";
+
+ my $output = `$command 2>&1`;
+ my $ret = $?;
+
+ logit $output;
+
+ if ($ret) {
+ doprint "FAILED\n";
+ dodie "Failed to git bisect";
+ }
+
+ doprint "SUCCESS\n";
+ if ($output =~ m/^(Bisecting: .*\(roughly \d+ steps?\))\s+\[([[:xdigit:]]+)\]/) {
+ doprint "$1 [$2]\n";
+ } elsif ($output =~ m/^([[:xdigit:]]+) is the first bad commit/) {
+ $bisect_bad_commit = $1;
+ doprint "Found bad commit... $1\n";
+ return 0;
+ } else {
+ # we already logged it, just print it now.
+ print $output;
+ }
+
+ return 1;
+}
+
+sub bisect_reboot {
+ doprint "Reboot and sleep $bisect_sleep_time seconds\n";
+ reboot_to_good $bisect_sleep_time;
+}
+
+# returns 1 on success, 0 on failure, -1 on skip
+sub run_bisect_test {
+ my ($type, $buildtype) = @_;
+
+ my $failed = 0;
+ my $result;
+ my $output;
+ my $ret;
+
+ $in_bisect = 1;
+
+ build $buildtype or $failed = 1;
+
+ if ($type ne "build") {
+ if ($failed && $bisect_skip) {
+ $in_bisect = 0;
+ return -1;
+ }
+ dodie "Failed on build" if $failed;
+
+ # Now boot the box
+ start_monitor_and_install or $failed = 1;
+
+ if ($type ne "boot") {
+ if ($failed && $bisect_skip) {
+ end_monitor;
+ bisect_reboot;
+ $in_bisect = 0;
+ return -1;
+ }
+ dodie "Failed on boot" if $failed;
+
+ do_run_test or $failed = 1;
+ }
+ end_monitor;
+ }
+
+ if ($failed) {
+ $result = 0;
+ } else {
+ $result = 1;
+ }
+
+ # reboot the box to a kernel we can ssh to
+ if ($type ne "build") {
+ bisect_reboot;
+ }
+ $in_bisect = 0;
+
+ return $result;
+}
+
+sub run_bisect {
+ my ($type) = @_;
+ my $buildtype = "oldconfig";
+
+ # We should have a minconfig to use?
+ if (defined($minconfig)) {
+ $buildtype = "useconfig:$minconfig";
+ }
+
+ # If the user sets bisect_tries to less than 1, then no tries
+ # is a success.
+ my $ret = 1;
+
+ # Still let the user manually decide that though.
+ if ($bisect_tries < 1 && $bisect_manual) {
+ $ret = answer_bisect;
+ }
+
+ for (my $i = 0; $i < $bisect_tries; $i++) {
+ if ($bisect_tries > 1) {
+ my $t = $i + 1;
+ doprint("Running bisect trial $t of $bisect_tries:\n");
+ }
+ $ret = run_bisect_test $type, $buildtype;
+
+ if ($bisect_manual) {
+ $ret = answer_bisect;
+ }
+
+ last if (!$ret);
+ }
+
+ # Are we looking for where it worked, not failed?
+ if ($reverse_bisect && $ret >= 0) {
+ $ret = !$ret;
+ }
+
+ if ($ret > 0) {
+ return "good";
+ } elsif ($ret == 0) {
+ return "bad";
+ } elsif ($bisect_skip) {
+ doprint "HIT A BAD COMMIT ... SKIPPING\n";
+ return "skip";
+ }
+}
+
+sub update_bisect_replay {
+ my $tmp_log = "$tmpdir/ktest_bisect_log";
+ run_command "git bisect log > $tmp_log" or
+ die "can't create bisect log";
+ return $tmp_log;
+}
+
+sub bisect {
+ my ($i) = @_;
+
+ my $result;
+
+ die "BISECT_GOOD[$i] not defined\n" if (!defined($bisect_good));
+ die "BISECT_BAD[$i] not defined\n" if (!defined($bisect_bad));
+ die "BISECT_TYPE[$i] not defined\n" if (!defined($bisect_type));
+
+ my $good = $bisect_good;
+ my $bad = $bisect_bad;
+ my $type = $bisect_type;
+ my $start = $bisect_start;
+ my $replay = $bisect_replay;
+ my $start_files = $bisect_files;
+
+ if (defined($start_files)) {
+ $start_files = " -- " . $start_files;
+ } else {
+ $start_files = "";
+ }
+
+ # convert to true sha1's
+ $good = get_sha1($good);
+ $bad = get_sha1($bad);
+
+ if (defined($bisect_reverse) && $bisect_reverse == 1) {
+ doprint "Performing a reverse bisect (bad is good, good is bad!)\n";
+ $reverse_bisect = 1;
+ } else {
+ $reverse_bisect = 0;
+ }
+
+ # Can't have a test without having a test to run
+ if ($type eq "test" && !defined($run_test)) {
+ $type = "boot";
+ }
+
+ # Check if a bisect was running
+ my $bisect_start_file = "$builddir/.git/BISECT_START";
+
+ my $check = $bisect_check;
+ my $do_check = defined($check) && $check ne "0";
+
+ if ( -f $bisect_start_file ) {
+ print "Bisect in progress found\n";
+ if ($do_check) {
+ print " If you say yes, then no checks of good or bad will be done\n";
+ }
+ if (defined($replay)) {
+ print "** BISECT_REPLAY is defined in config file **";
+ print " Ignore config option and perform new git bisect log?\n";
+ if (read_ync " (yes, no, or cancel) ") {
+ $replay = update_bisect_replay;
+ $do_check = 0;
+ }
+ } elsif (read_yn "read git log and continue?") {
+ $replay = update_bisect_replay;
+ $do_check = 0;
+ }
+ }
+
+ if ($do_check) {
+
+ # get current HEAD
+ my $head = get_sha1("HEAD");
+
+ if ($check ne "good") {
+ doprint "TESTING BISECT BAD [$bad]\n";
+ run_command "git checkout $bad" or
+ die "Failed to checkout $bad";
+
+ $result = run_bisect $type;
+
+ if ($result ne "bad") {
+ fail "Tested BISECT_BAD [$bad] and it succeeded" and return 0;
+ }
+ }
+
+ if ($check ne "bad") {
+ doprint "TESTING BISECT GOOD [$good]\n";
+ run_command "git checkout $good" or
+ die "Failed to checkout $good";
+
+ $result = run_bisect $type;
+
+ if ($result ne "good") {
+ fail "Tested BISECT_GOOD [$good] and it failed" and return 0;
+ }
+ }
+
+ # checkout where we started
+ run_command "git checkout $head" or
+ die "Failed to checkout $head";
+ }
+
+ run_command "git bisect start$start_files" or
+ dodie "could not start bisect";
+
+ if (defined($replay)) {
+ run_command "git bisect replay $replay" or
+ dodie "failed to run replay";
+ } else {
+
+ run_command "git bisect good $good" or
+ dodie "could not set bisect good to $good";
+
+ run_git_bisect "git bisect bad $bad" or
+ dodie "could not set bisect bad to $bad";
+
+ }
+
+ if (defined($start)) {
+ run_command "git checkout $start" or
+ dodie "failed to checkout $start";
+ }
+
+ my $test;
+ do {
+ $result = run_bisect $type;
+ $test = run_git_bisect "git bisect $result";
+ print_times;
+ } while ($test);
+
+ run_command "git bisect log" or
+ dodie "could not capture git bisect log";
+
+ run_command "git bisect reset" or
+ dodie "could not reset git bisect";
+
+ doprint "Bad commit was [$bisect_bad_commit]\n";
+
+ success $i;
+}
+
+# config_ignore holds the configs that were set (or unset) for
+# a good config and we will ignore these configs for the rest
+# of a config bisect. These configs stay as they were.
+my %config_ignore;
+
+# config_set holds what all configs were set as.
+my %config_set;
+
+# config_off holds the set of configs that the bad config had disabled.
+# We need to record them and set them in the .config when running
+# olddefconfig, because olddefconfig keeps the defaults.
+my %config_off;
+
+# config_off_tmp holds a set of configs to turn off for now
+my @config_off_tmp;
+
+# config_list is the set of configs that are being tested
+my %config_list;
+my %null_config;
+
+my %dependency;
+
+sub assign_configs {
+ my ($hash, $config) = @_;
+
+ doprint "Reading configs from $config\n";
+
+ open (IN, $config)
+ or dodie "Failed to read $config";
+
+ while (<IN>) {
+ chomp;
+ if (/^((CONFIG\S*)=.*)/) {
+ ${$hash}{$2} = $1;
+ } elsif (/^(# (CONFIG\S*) is not set)/) {
+ ${$hash}{$2} = $1;
+ }
+ }
+
+ close(IN);
+}
+
+sub process_config_ignore {
+ my ($config) = @_;
+
+ assign_configs \%config_ignore, $config;
+}
+
+sub get_dependencies {
+ my ($config) = @_;
+
+ my $arr = $dependency{$config};
+ if (!defined($arr)) {
+ return ();
+ }
+
+ my @deps = @{$arr};
+
+ foreach my $dep (@{$arr}) {
+ print "ADD DEP $dep\n";
+ @deps = (@deps, get_dependencies $dep);
+ }
+
+ return @deps;
+}
+
+sub save_config {
+ my ($pc, $file) = @_;
+
+ my %configs = %{$pc};
+
+ doprint "Saving configs into $file\n";
+
+ open(OUT, ">$file") or dodie "Can not write to $file";
+
+ foreach my $config (keys %configs) {
+ print OUT "$configs{$config}\n";
+ }
+ close(OUT);
+}
+
+sub create_config {
+ my ($name, $pc) = @_;
+
+ doprint "Creating old config from $name configs\n";
+
+ save_config $pc, $output_config;
+
+ make_oldconfig;
+}
+
+# compare two config hashes, and return configs with different vals.
+# It returns B's config values, but you can use A to see what A was.
+sub diff_config_vals {
+ my ($pa, $pb) = @_;
+
+ # crappy Perl way to pass in hashes.
+ my %a = %{$pa};
+ my %b = %{$pb};
+
+ my %ret;
+
+ foreach my $item (keys %a) {
+ if (defined($b{$item}) && $b{$item} ne $a{$item}) {
+ $ret{$item} = $b{$item};
+ }
+ }
+
+ return %ret;
+}
+
+# compare two config hashes and return the configs in B but not A
+sub diff_configs {
+ my ($pa, $pb) = @_;
+
+ my %ret;
+
+ # crappy Perl way to pass in hashes.
+ my %a = %{$pa};
+ my %b = %{$pb};
+
+ foreach my $item (keys %b) {
+ if (!defined($a{$item})) {
+ $ret{$item} = $b{$item};
+ }
+ }
+
+ return %ret;
+}
+
+# return if two configs are equal or not
+# 0 is equal +1 b has something a does not
+# +1 if a and b have a different item.
+# -1 if a has something b does not
+sub compare_configs {
+ my ($pa, $pb) = @_;
+
+ my %ret;
+
+ # crappy Perl way to pass in hashes.
+ my %a = %{$pa};
+ my %b = %{$pb};
+
+ foreach my $item (keys %b) {
+ if (!defined($a{$item})) {
+ return 1;
+ }
+ if ($a{$item} ne $b{$item}) {
+ return 1;
+ }
+ }
+
+ foreach my $item (keys %a) {
+ if (!defined($b{$item})) {
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+sub run_config_bisect_test {
+ my ($type) = @_;
+
+ my $ret = run_bisect_test $type, "oldconfig";
+
+ if ($bisect_manual) {
+ $ret = answer_bisect;
+ }
+
+ return $ret;
+}
+
+sub process_failed {
+ my ($config) = @_;
+
+ doprint "\n\n***************************************\n";
+ doprint "Found bad config: $config\n";
+ doprint "***************************************\n\n";
+}
+
+# used for config bisecting
+my $good_config;
+my $bad_config;
+
+sub process_new_config {
+ my ($tc, $nc, $gc, $bc) = @_;
+
+ my %tmp_config = %{$tc};
+ my %good_configs = %{$gc};
+ my %bad_configs = %{$bc};
+
+ my %new_configs;
+
+ my $runtest = 1;
+ my $ret;
+
+ create_config "tmp_configs", \%tmp_config;
+ assign_configs \%new_configs, $output_config;
+
+ $ret = compare_configs \%new_configs, \%bad_configs;
+ if (!$ret) {
+ doprint "New config equals bad config, try next test\n";
+ $runtest = 0;
+ }
+
+ if ($runtest) {
+ $ret = compare_configs \%new_configs, \%good_configs;
+ if (!$ret) {
+ doprint "New config equals good config, try next test\n";
+ $runtest = 0;
+ }
+ }
+
+ %{$nc} = %new_configs;
+
+ return $runtest;
+}
+
+sub run_config_bisect {
+ my ($pgood, $pbad) = @_;
+
+ my $type = $config_bisect_type;
+
+ my %good_configs = %{$pgood};
+ my %bad_configs = %{$pbad};
+
+ my %diff_configs = diff_config_vals \%good_configs, \%bad_configs;
+ my %b_configs = diff_configs \%good_configs, \%bad_configs;
+ my %g_configs = diff_configs \%bad_configs, \%good_configs;
+
+ my @diff_arr = keys %diff_configs;
+ my $len_diff = $#diff_arr + 1;
+
+ my @b_arr = keys %b_configs;
+ my $len_b = $#b_arr + 1;
+
+ my @g_arr = keys %g_configs;
+ my $len_g = $#g_arr + 1;
+
+ my $runtest = 1;
+ my %new_configs;
+ my $ret;
+
+ # First, lets get it down to a single subset.
+ # Is the problem with a difference in values?
+ # Is the problem with a missing config?
+ # Is the problem with a config that breaks things?
+
+ # Enable all of one set and see if we get a new bad
+ # or good config.
+
+ # first set the good config to the bad values.
+
+ doprint "d=$len_diff g=$len_g b=$len_b\n";
+
+ # first lets enable things in bad config that are enabled in good config
+
+ if ($len_diff > 0) {
+ if ($len_b > 0 || $len_g > 0) {
+ my %tmp_config = %bad_configs;
+
+ doprint "Set tmp config to be bad config with good config values\n";
+ foreach my $item (@diff_arr) {
+ $tmp_config{$item} = $good_configs{$item};
+ }
+
+ $runtest = process_new_config \%tmp_config, \%new_configs,
+ \%good_configs, \%bad_configs;
+ }
+ }
+
+ if (!$runtest && $len_diff > 0) {
+
+ if ($len_diff == 1) {
+ process_failed $diff_arr[0];
+ return 1;
+ }
+ my %tmp_config = %bad_configs;
+
+ my $half = int($#diff_arr / 2);
+ my @tophalf = @diff_arr[0 .. $half];
+
+ doprint "Settings bisect with top half:\n";
+ doprint "Set tmp config to be bad config with some good config values\n";
+ foreach my $item (@tophalf) {
+ $tmp_config{$item} = $good_configs{$item};
+ }
+
+ $runtest = process_new_config \%tmp_config, \%new_configs,
+ \%good_configs, \%bad_configs;
+
+ if (!$runtest) {
+ my %tmp_config = %bad_configs;
+
+ doprint "Try bottom half\n";
+
+ my @bottomhalf = @diff_arr[$half+1 .. $#diff_arr];
+
+ foreach my $item (@bottomhalf) {
+ $tmp_config{$item} = $good_configs{$item};
+ }
+
+ $runtest = process_new_config \%tmp_config, \%new_configs,
+ \%good_configs, \%bad_configs;
+ }
+ }
+
+ if ($runtest) {
+ $ret = run_config_bisect_test $type;
+ if ($ret) {
+ doprint "NEW GOOD CONFIG\n";
+ %good_configs = %new_configs;
+ run_command "mv $good_config ${good_config}.last";
+ save_config \%good_configs, $good_config;
+ %{$pgood} = %good_configs;
+ } else {
+ doprint "NEW BAD CONFIG\n";
+ %bad_configs = %new_configs;
+ run_command "mv $bad_config ${bad_config}.last";
+ save_config \%bad_configs, $bad_config;
+ %{$pbad} = %bad_configs;
+ }
+ return 0;
+ }
+
+ fail "Hmm, need to do a mix match?\n";
+ return -1;
+}
+
+sub config_bisect {
+ my ($i) = @_;
+
+ my $type = $config_bisect_type;
+ my $ret;
+
+ $bad_config = $config_bisect;
+
+ if (defined($config_bisect_good)) {
+ $good_config = $config_bisect_good;
+ } elsif (defined($minconfig)) {
+ $good_config = $minconfig;
+ } else {
+ doprint "No config specified, checking if defconfig works";
+ $ret = run_bisect_test $type, "defconfig";
+ if (!$ret) {
+ fail "Have no good config to compare with, please set CONFIG_BISECT_GOOD";
+ return 1;
+ }
+ $good_config = $output_config;
+ }
+
+ # we don't want min configs to cause issues here.
+ doprint "Disabling 'MIN_CONFIG' for this test\n";
+ undef $minconfig;
+
+ my %good_configs;
+ my %bad_configs;
+ my %tmp_configs;
+
+ doprint "Run good configs through make oldconfig\n";
+ assign_configs \%tmp_configs, $good_config;
+ create_config "$good_config", \%tmp_configs;
+ assign_configs \%good_configs, $output_config;
+
+ doprint "Run bad configs through make oldconfig\n";
+ assign_configs \%tmp_configs, $bad_config;
+ create_config "$bad_config", \%tmp_configs;
+ assign_configs \%bad_configs, $output_config;
+
+ $good_config = "$tmpdir/good_config";
+ $bad_config = "$tmpdir/bad_config";
+
+ save_config \%good_configs, $good_config;
+ save_config \%bad_configs, $bad_config;
+
+
+ if (defined($config_bisect_check) && $config_bisect_check ne "0") {
+ if ($config_bisect_check ne "good") {
+ doprint "Testing bad config\n";
+
+ $ret = run_bisect_test $type, "useconfig:$bad_config";
+ if ($ret) {
+ fail "Bad config succeeded when expected to fail!";
+ return 0;
+ }
+ }
+ if ($config_bisect_check ne "bad") {
+ doprint "Testing good config\n";
+
+ $ret = run_bisect_test $type, "useconfig:$good_config";
+ if (!$ret) {
+ fail "Good config failed when expected to succeed!";
+ return 0;
+ }
+ }
+ }
+
+ do {
+ $ret = run_config_bisect \%good_configs, \%bad_configs;
+ print_times;
+ } while (!$ret);
+
+ return $ret if ($ret < 0);
+
+ success $i;
+}
+
+sub patchcheck_reboot {
+ doprint "Reboot and sleep $patchcheck_sleep_time seconds\n";
+ reboot_to_good $patchcheck_sleep_time;
+}
+
+sub patchcheck {
+ my ($i) = @_;
+
+ die "PATCHCHECK_START[$i] not defined\n"
+ if (!defined($patchcheck_start));
+ die "PATCHCHECK_TYPE[$i] not defined\n"
+ if (!defined($patchcheck_type));
+
+ my $start = $patchcheck_start;
+
+ my $cherry = $patchcheck_cherry;
+ if (!defined($cherry)) {
+ $cherry = 0;
+ }
+
+ my $end = "HEAD";
+ if (defined($patchcheck_end)) {
+ $end = $patchcheck_end;
+ } elsif ($cherry) {
+ die "PATCHCHECK_END must be defined with PATCHCHECK_CHERRY\n";
+ }
+
+ # Get the true sha1's since we can use things like HEAD~3
+ $start = get_sha1($start);
+ $end = get_sha1($end);
+
+ my $type = $patchcheck_type;
+
+ # Can't have a test without having a test to run
+ if ($type eq "test" && !defined($run_test)) {
+ $type = "boot";
+ }
+
+ if ($cherry) {
+ open (IN, "git cherry -v $start $end|") or
+ dodie "could not get git list";
+ } else {
+ open (IN, "git log --pretty=oneline $end|") or
+ dodie "could not get git list";
+ }
+
+ my @list;
+
+ while (<IN>) {
+ chomp;
+ # git cherry adds a '+' we want to remove
+ s/^\+ //;
+ $list[$#list+1] = $_;
+ last if (/^$start/);
+ }
+ close(IN);
+
+ if (!$cherry) {
+ if ($list[$#list] !~ /^$start/) {
+ fail "SHA1 $start not found";
+ }
+
+ # go backwards in the list
+ @list = reverse @list;
+ }
+
+ doprint("Going to test the following commits:\n");
+ foreach my $l (@list) {
+ doprint "$l\n";
+ }
+
+ my $save_clean = $noclean;
+ my %ignored_warnings;
+
+ if (defined($ignore_warnings)) {
+ foreach my $sha1 (split /\s+/, $ignore_warnings) {
+ $ignored_warnings{$sha1} = 1;
+ }
+ }
+
+ $in_patchcheck = 1;
+ foreach my $item (@list) {
+ my $sha1 = $item;
+ $sha1 =~ s/^([[:xdigit:]]+).*/$1/;
+
+ doprint "\nProcessing commit \"$item\"\n\n";
+
+ run_command "git checkout $sha1" or
+ die "Failed to checkout $sha1";
+
+ # only clean on the first and last patch
+ if ($item eq $list[0] ||
+ $item eq $list[$#list]) {
+ $noclean = $save_clean;
+ } else {
+ $noclean = 1;
+ }
+
+ if (defined($minconfig)) {
+ build "useconfig:$minconfig" or return 0;
+ } else {
+ # ?? no config to use?
+ build "oldconfig" or return 0;
+ }
+
+ # No need to do per patch checking if warnings file exists
+ if (!defined($warnings_file) && !defined($ignored_warnings{$sha1})) {
+ check_patch_buildlog $sha1 or return 0;
+ }
+
+ check_buildlog or return 0;
+
+ next if ($type eq "build");
+
+ my $failed = 0;
+
+ start_monitor_and_install or $failed = 1;
+
+ if (!$failed && $type ne "boot"){
+ do_run_test or $failed = 1;
+ }
+ end_monitor;
+ if ($failed) {
+ print_times;
+ return 0;
+ }
+ patchcheck_reboot;
+ print_times;
+ }
+ $in_patchcheck = 0;
+ success $i;
+
+ return 1;
+}
+
+my %depends;
+my %depcount;
+my $iflevel = 0;
+my @ifdeps;
+
+# prevent recursion
+my %read_kconfigs;
+
+sub add_dep {
+ # $config depends on $dep
+ my ($config, $dep) = @_;
+
+ if (defined($depends{$config})) {
+ $depends{$config} .= " " . $dep;
+ } else {
+ $depends{$config} = $dep;
+ }
+
+ # record the number of configs depending on $dep
+ if (defined $depcount{$dep}) {
+ $depcount{$dep}++;
+ } else {
+ $depcount{$dep} = 1;
+ }
+}
+
+# taken from streamline_config.pl
+sub read_kconfig {
+ my ($kconfig) = @_;
+
+ my $state = "NONE";
+ my $config;
+ my @kconfigs;
+
+ my $cont = 0;
+ my $line;
+
+
+ if (! -f $kconfig) {
+ doprint "file $kconfig does not exist, skipping\n";
+ return;
+ }
+
+ open(KIN, "$kconfig")
+ or die "Can't open $kconfig";
+ while (<KIN>) {
+ chomp;
+
+ # Make sure that lines ending with \ continue
+ if ($cont) {
+ $_ = $line . " " . $_;
+ }
+
+ if (s/\\$//) {
+ $cont = 1;
+ $line = $_;
+ next;
+ }
+
+ $cont = 0;
+
+ # collect any Kconfig sources
+ if (/^source\s*"(.*)"/) {
+ $kconfigs[$#kconfigs+1] = $1;
+ }
+
+ # configs found
+ if (/^\s*(menu)?config\s+(\S+)\s*$/) {
+ $state = "NEW";
+ $config = $2;
+
+ for (my $i = 0; $i < $iflevel; $i++) {
+ add_dep $config, $ifdeps[$i];
+ }
+
+ # collect the depends for the config
+ } elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) {
+
+ add_dep $config, $1;
+
+ # Get the configs that select this config
+ } elsif ($state eq "NEW" && /^\s*select\s+(\S+)/) {
+
+ # selected by depends on config
+ add_dep $1, $config;
+
+ # Check for if statements
+ } elsif (/^if\s+(.*\S)\s*$/) {
+ my $deps = $1;
+ # remove beginning and ending non text
+ $deps =~ s/^[^a-zA-Z0-9_]*//;
+ $deps =~ s/[^a-zA-Z0-9_]*$//;
+
+ my @deps = split /[^a-zA-Z0-9_]+/, $deps;
+
+ $ifdeps[$iflevel++] = join ':', @deps;
+
+ } elsif (/^endif/) {
+
+ $iflevel-- if ($iflevel);
+
+ # stop on "help"
+ } elsif (/^\s*help\s*$/) {
+ $state = "NONE";
+ }
+ }
+ close(KIN);
+
+ # read in any configs that were found.
+ foreach $kconfig (@kconfigs) {
+ if (!defined($read_kconfigs{$kconfig})) {
+ $read_kconfigs{$kconfig} = 1;
+ read_kconfig("$builddir/$kconfig");
+ }
+ }
+}
+
+sub read_depends {
+ # find out which arch this is by the kconfig file
+ open (IN, $output_config)
+ or dodie "Failed to read $output_config";
+ my $arch;
+ while (<IN>) {
+ if (m,Linux/(\S+)\s+\S+\s+Kernel Configuration,) {
+ $arch = $1;
+ last;
+ }
+ }
+ close IN;
+
+ if (!defined($arch)) {
+ doprint "Could not find arch from config file\n";
+ doprint "no dependencies used\n";
+ return;
+ }
+
+ # arch is really the subarch, we need to know
+ # what directory to look at.
+ if ($arch eq "i386" || $arch eq "x86_64") {
+ $arch = "x86";
+ } elsif ($arch =~ /^tile/) {
+ $arch = "tile";
+ }
+
+ my $kconfig = "$builddir/arch/$arch/Kconfig";
+
+ if (! -f $kconfig && $arch =~ /\d$/) {
+ my $orig = $arch;
+ # some subarchs have numbers, truncate them
+ $arch =~ s/\d*$//;
+ $kconfig = "$builddir/arch/$arch/Kconfig";
+ if (! -f $kconfig) {
+ doprint "No idea what arch dir $orig is for\n";
+ doprint "no dependencies used\n";
+ return;
+ }
+ }
+
+ read_kconfig($kconfig);
+}
+
+sub make_new_config {
+ my @configs = @_;
+
+ open (OUT, ">$output_config")
+ or dodie "Failed to write $output_config";
+
+ foreach my $config (@configs) {
+ print OUT "$config\n";
+ }
+ close OUT;
+}
+
+sub chomp_config {
+ my ($config) = @_;
+
+ $config =~ s/CONFIG_//;
+
+ return $config;
+}
+
+sub get_depends {
+ my ($dep) = @_;
+
+ my $kconfig = chomp_config $dep;
+
+ $dep = $depends{"$kconfig"};
+
+ # the dep string we have saves the dependencies as they
+ # were found, including expressions like ! && ||. We
+ # want to split this out into just an array of configs.
+
+ my $valid = "A-Za-z_0-9";
+
+ my @configs;
+
+ while ($dep =~ /[$valid]/) {
+
+ if ($dep =~ /^[^$valid]*([$valid]+)/) {
+ my $conf = "CONFIG_" . $1;
+
+ $configs[$#configs + 1] = $conf;
+
+ $dep =~ s/^[^$valid]*[$valid]+//;
+ } else {
+ die "this should never happen";
+ }
+ }
+
+ return @configs;
+}
+
+my %min_configs;
+my %keep_configs;
+my %save_configs;
+my %processed_configs;
+my %nochange_config;
+
+sub test_this_config {
+ my ($config) = @_;
+
+ my $found;
+
+ # if we already processed this config, skip it
+ if (defined($processed_configs{$config})) {
+ return undef;
+ }
+ $processed_configs{$config} = 1;
+
+ # if this config failed during this round, skip it
+ if (defined($nochange_config{$config})) {
+ return undef;
+ }
+
+ my $kconfig = chomp_config $config;
+
+ # Test dependencies first
+ if (defined($depends{"$kconfig"})) {
+ my @parents = get_depends $config;
+ foreach my $parent (@parents) {
+ # if the parent is in the min config, check it first
+ next if (!defined($min_configs{$parent}));
+ $found = test_this_config($parent);
+ if (defined($found)) {
+ return $found;
+ }
+ }
+ }
+
+ # Remove this config from the list of configs
+ # do a make olddefconfig and then read the resulting
+ # .config to make sure it is missing the config that
+ # we had before
+ my %configs = %min_configs;
+ delete $configs{$config};
+ make_new_config ((values %configs), (values %keep_configs));
+ make_oldconfig;
+ undef %configs;
+ assign_configs \%configs, $output_config;
+
+ if (!defined($configs{$config}) || $configs{$config} =~ /^#/) {
+ return $config;
+ }
+
+ doprint "disabling config $config did not change .config\n";
+
+ $nochange_config{$config} = 1;
+
+ return undef;
+}
+
+sub make_min_config {
+ my ($i) = @_;
+
+ my $type = $minconfig_type;
+ if ($type ne "boot" && $type ne "test") {
+ fail "Invalid MIN_CONFIG_TYPE '$minconfig_type'\n" .
+ " make_min_config works only with 'boot' and 'test'\n" and return;
+ }
+
+ if (!defined($output_minconfig)) {
+ fail "OUTPUT_MIN_CONFIG not defined" and return;
+ }
+
+ # If output_minconfig exists, and the start_minconfig
+ # came from min_config, than ask if we should use
+ # that instead.
+ if (-f $output_minconfig && !$start_minconfig_defined) {
+ print "$output_minconfig exists\n";
+ if (!defined($use_output_minconfig)) {
+ if (read_yn " Use it as minconfig?") {
+ $start_minconfig = $output_minconfig;
+ }
+ } elsif ($use_output_minconfig > 0) {
+ doprint "Using $output_minconfig as MIN_CONFIG\n";
+ $start_minconfig = $output_minconfig;
+ } else {
+ doprint "Set to still use MIN_CONFIG as starting point\n";
+ }
+ }
+
+ if (!defined($start_minconfig)) {
+ fail "START_MIN_CONFIG or MIN_CONFIG not defined" and return;
+ }
+
+ my $temp_config = "$tmpdir/temp_config";
+
+ # First things first. We build an allnoconfig to find
+ # out what the defaults are that we can't touch.
+ # Some are selections, but we really can't handle selections.
+
+ my $save_minconfig = $minconfig;
+ undef $minconfig;
+
+ run_command "$make allnoconfig" or return 0;
+
+ read_depends;
+
+ process_config_ignore $output_config;
+
+ undef %save_configs;
+ undef %min_configs;
+
+ if (defined($ignore_config)) {
+ # make sure the file exists
+ `touch $ignore_config`;
+ assign_configs \%save_configs, $ignore_config;
+ }
+
+ %keep_configs = %save_configs;
+
+ doprint "Load initial configs from $start_minconfig\n";
+
+ # Look at the current min configs, and save off all the
+ # ones that were set via the allnoconfig
+ assign_configs \%min_configs, $start_minconfig;
+
+ my @config_keys = keys %min_configs;
+
+ # All configs need a depcount
+ foreach my $config (@config_keys) {
+ my $kconfig = chomp_config $config;
+ if (!defined $depcount{$kconfig}) {
+ $depcount{$kconfig} = 0;
+ }
+ }
+
+ # Remove anything that was set by the make allnoconfig
+ # we shouldn't need them as they get set for us anyway.
+ foreach my $config (@config_keys) {
+ # Remove anything in the ignore_config
+ if (defined($keep_configs{$config})) {
+ my $file = $ignore_config;
+ $file =~ s,.*/(.*?)$,$1,;
+ doprint "$config set by $file ... ignored\n";
+ delete $min_configs{$config};
+ next;
+ }
+ # But make sure the settings are the same. If a min config
+ # sets a selection, we do not want to get rid of it if
+ # it is not the same as what we have. Just move it into
+ # the keep configs.
+ if (defined($config_ignore{$config})) {
+ if ($config_ignore{$config} ne $min_configs{$config}) {
+ doprint "$config is in allnoconfig as '$config_ignore{$config}'";
+ doprint " but it is '$min_configs{$config}' in minconfig .. keeping\n";
+ $keep_configs{$config} = $min_configs{$config};
+ } else {
+ doprint "$config set by allnoconfig ... ignored\n";
+ }
+ delete $min_configs{$config};
+ }
+ }
+
+ my $done = 0;
+ my $take_two = 0;
+
+ while (!$done) {
+
+ my $config;
+ my $found;
+
+ # Now disable each config one by one and do a make oldconfig
+ # till we find a config that changes our list.
+
+ my @test_configs = keys %min_configs;
+
+ # Sort keys by who is most dependent on
+ @test_configs = sort { $depcount{chomp_config($b)} <=> $depcount{chomp_config($a)} }
+ @test_configs ;
+
+ # Put configs that did not modify the config at the end.
+ my $reset = 1;
+ for (my $i = 0; $i < $#test_configs; $i++) {
+ if (!defined($nochange_config{$test_configs[0]})) {
+ $reset = 0;
+ last;
+ }
+ # This config didn't change the .config last time.
+ # Place it at the end
+ my $config = shift @test_configs;
+ push @test_configs, $config;
+ }
+
+ # if every test config has failed to modify the .config file
+ # in the past, then reset and start over.
+ if ($reset) {
+ undef %nochange_config;
+ }
+
+ undef %processed_configs;
+
+ foreach my $config (@test_configs) {
+
+ $found = test_this_config $config;
+
+ last if (defined($found));
+
+ # oh well, try another config
+ }
+
+ if (!defined($found)) {
+ # we could have failed due to the nochange_config hash
+ # reset and try again
+ if (!$take_two) {
+ undef %nochange_config;
+ $take_two = 1;
+ next;
+ }
+ doprint "No more configs found that we can disable\n";
+ $done = 1;
+ last;
+ }
+ $take_two = 0;
+
+ $config = $found;
+
+ doprint "Test with $config disabled\n";
+
+ # set in_bisect to keep build and monitor from dieing
+ $in_bisect = 1;
+
+ my $failed = 0;
+ build "oldconfig" or $failed = 1;
+ if (!$failed) {
+ start_monitor_and_install or $failed = 1;
+
+ if ($type eq "test" && !$failed) {
+ do_run_test or $failed = 1;
+ }
+
+ end_monitor;
+ }
+
+ $in_bisect = 0;
+
+ if ($failed) {
+ doprint "$min_configs{$config} is needed to boot the box... keeping\n";
+ # this config is needed, add it to the ignore list.
+ $keep_configs{$config} = $min_configs{$config};
+ $save_configs{$config} = $min_configs{$config};
+ delete $min_configs{$config};
+
+ # update new ignore configs
+ if (defined($ignore_config)) {
+ open (OUT, ">$temp_config")
+ or die "Can't write to $temp_config";
+ foreach my $config (keys %save_configs) {
+ print OUT "$save_configs{$config}\n";
+ }
+ close OUT;
+ run_command "mv $temp_config $ignore_config" or
+ dodie "failed to copy update to $ignore_config";
+ }
+
+ } else {
+ # We booted without this config, remove it from the minconfigs.
+ doprint "$config is not needed, disabling\n";
+
+ delete $min_configs{$config};
+
+ # Also disable anything that is not enabled in this config
+ my %configs;
+ assign_configs \%configs, $output_config;
+ my @config_keys = keys %min_configs;
+ foreach my $config (@config_keys) {
+ if (!defined($configs{$config})) {
+ doprint "$config is not set, disabling\n";
+ delete $min_configs{$config};
+ }
+ }
+
+ # Save off all the current mandidory configs
+ open (OUT, ">$temp_config")
+ or die "Can't write to $temp_config";
+ foreach my $config (keys %keep_configs) {
+ print OUT "$keep_configs{$config}\n";
+ }
+ foreach my $config (keys %min_configs) {
+ print OUT "$min_configs{$config}\n";
+ }
+ close OUT;
+
+ run_command "mv $temp_config $output_minconfig" or
+ dodie "failed to copy update to $output_minconfig";
+ }
+
+ doprint "Reboot and wait $sleep_time seconds\n";
+ reboot_to_good $sleep_time;
+ }
+
+ success $i;
+ return 1;
+}
+
+sub make_warnings_file {
+ my ($i) = @_;
+
+ if (!defined($warnings_file)) {
+ dodie "Must define WARNINGS_FILE for make_warnings_file test";
+ }
+
+ if ($build_type eq "nobuild") {
+ dodie "BUILD_TYPE can not be 'nobuild' for make_warnings_file test";
+ }
+
+ build $build_type or dodie "Failed to build";
+
+ open(OUT, ">$warnings_file") or dodie "Can't create $warnings_file";
+
+ open(IN, $buildlog) or dodie "Can't open $buildlog";
+ while (<IN>) {
+
+ # Some compilers use UTF-8 extended for quotes
+ # for distcc heterogeneous systems, this causes issues
+ s/$utf8_quote/'/g;
+
+ if (/$check_build_re/) {
+ print OUT;
+ }
+ }
+ close(IN);
+
+ close(OUT);
+
+ success $i;
+}
+
+$#ARGV < 1 or die "ktest.pl version: $VERSION\n usage: ktest.pl [config-file]\n";
+
+if ($#ARGV == 0) {
+ $ktest_config = $ARGV[0];
+ if (! -f $ktest_config) {
+ print "$ktest_config does not exist.\n";
+ if (!read_yn "Create it?") {
+ exit 0;
+ }
+ }
+}
+
+if (! -f $ktest_config) {
+ $newconfig = 1;
+ get_test_case;
+ open(OUT, ">$ktest_config") or die "Can not create $ktest_config";
+ print OUT << "EOF"
+# Generated by ktest.pl
+#
+
+# PWD is a ktest.pl variable that will result in the process working
+# directory that ktest.pl is executed in.
+
+# THIS_DIR is automatically assigned the PWD of the path that generated
+# the config file. It is best to use this variable when assigning other
+# directory paths within this directory. This allows you to easily
+# move the test cases to other locations or to other machines.
+#
+THIS_DIR := $variable{"PWD"}
+
+# Define each test with TEST_START
+# The config options below it will override the defaults
+TEST_START
+TEST_TYPE = $default{"TEST_TYPE"}
+
+DEFAULTS
+EOF
+;
+ close(OUT);
+}
+read_config $ktest_config;
+
+if (defined($opt{"LOG_FILE"})) {
+ $opt{"LOG_FILE"} = eval_option("LOG_FILE", $opt{"LOG_FILE"}, -1);
+}
+
+# Append any configs entered in manually to the config file.
+my @new_configs = keys %entered_configs;
+if ($#new_configs >= 0) {
+ print "\nAppending entered in configs to $ktest_config\n";
+ open(OUT, ">>$ktest_config") or die "Can not append to $ktest_config";
+ foreach my $config (@new_configs) {
+ print OUT "$config = $entered_configs{$config}\n";
+ $opt{$config} = process_variables($entered_configs{$config});
+ }
+}
+
+if ($opt{"CLEAR_LOG"} && defined($opt{"LOG_FILE"})) {
+ unlink $opt{"LOG_FILE"};
+}
+
+doprint "\n\nSTARTING AUTOMATED TESTS\n\n";
+
+for (my $i = 0, my $repeat = 1; $i <= $opt{"NUM_TESTS"}; $i += $repeat) {
+
+ if (!$i) {
+ doprint "DEFAULT OPTIONS:\n";
+ } else {
+ doprint "\nTEST $i OPTIONS";
+ if (defined($repeat_tests{$i})) {
+ $repeat = $repeat_tests{$i};
+ doprint " ITERATE $repeat";
+ }
+ doprint "\n";
+ }
+
+ foreach my $option (sort keys %opt) {
+
+ if ($option =~ /\[(\d+)\]$/) {
+ next if ($i != $1);
+ } else {
+ next if ($i);
+ }
+
+ doprint "$option = $opt{$option}\n";
+ }
+}
+
+sub option_defined {
+ my ($option) = @_;
+
+ if (defined($opt{$option}) && $opt{$option} !~ /^\s*$/) {
+ return 1;
+ }
+
+ return 0;
+}
+
+sub __set_test_option {
+ my ($name, $i) = @_;
+
+ my $option = "$name\[$i\]";
+
+ if (option_defined($option)) {
+ return $opt{$option};
+ }
+
+ foreach my $test (keys %repeat_tests) {
+ if ($i >= $test &&
+ $i < $test + $repeat_tests{$test}) {
+ $option = "$name\[$test\]";
+ if (option_defined($option)) {
+ return $opt{$option};
+ }
+ }
+ }
+
+ if (option_defined($name)) {
+ return $opt{$name};
+ }
+
+ return undef;
+}
+
+sub set_test_option {
+ my ($name, $i) = @_;
+
+ my $option = __set_test_option($name, $i);
+ return $option if (!defined($option));
+
+ return eval_option($name, $option, $i);
+}
+
+# First we need to do is the builds
+for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
+
+ # Do not reboot on failing test options
+ $no_reboot = 1;
+ $reboot_success = 0;
+
+ $have_version = 0;
+
+ $iteration = $i;
+
+ $build_time = 0;
+ $install_time = 0;
+ $reboot_time = 0;
+ $test_time = 0;
+
+ undef %force_config;
+
+ my $makecmd = set_test_option("MAKE_CMD", $i);
+
+ $outputdir = set_test_option("OUTPUT_DIR", $i);
+ $builddir = set_test_option("BUILD_DIR", $i);
+
+ chdir $builddir || die "can't change directory to $builddir";
+
+ if (!-d $outputdir) {
+ mkpath($outputdir) or
+ die "can't create $outputdir";
+ }
+
+ $make = "$makecmd O=$outputdir";
+
+ # Load all the options into their mapped variable names
+ foreach my $opt (keys %option_map) {
+ ${$option_map{$opt}} = set_test_option($opt, $i);
+ }
+
+ $start_minconfig_defined = 1;
+
+ # The first test may override the PRE_KTEST option
+ if (defined($pre_ktest) && $i == 1) {
+ doprint "\n";
+ run_command $pre_ktest;
+ }
+
+ # Any test can override the POST_KTEST option
+ # The last test takes precedence.
+ if (defined($post_ktest)) {
+ $final_post_ktest = $post_ktest;
+ }
+
+ if (!defined($start_minconfig)) {
+ $start_minconfig_defined = 0;
+ $start_minconfig = $minconfig;
+ }
+
+ if (!-d $tmpdir) {
+ mkpath($tmpdir) or
+ die "can't create $tmpdir";
+ }
+
+ $ENV{"SSH_USER"} = $ssh_user;
+ $ENV{"MACHINE"} = $machine;
+
+ $buildlog = "$tmpdir/buildlog-$machine";
+ $testlog = "$tmpdir/testlog-$machine";
+ $dmesg = "$tmpdir/dmesg-$machine";
+ $output_config = "$outputdir/.config";
+
+ if (!$buildonly) {
+ $target = "$ssh_user\@$machine";
+ if ($reboot_type eq "grub") {
+ dodie "GRUB_MENU not defined" if (!defined($grub_menu));
+ } elsif ($reboot_type eq "grub2") {
+ dodie "GRUB_MENU not defined" if (!defined($grub_menu));
+ dodie "GRUB_FILE not defined" if (!defined($grub_file));
+ } elsif ($reboot_type eq "syslinux") {
+ dodie "SYSLINUX_LABEL not defined" if (!defined($syslinux_label));
+ }
+ }
+
+ my $run_type = $build_type;
+ if ($test_type eq "patchcheck") {
+ $run_type = $patchcheck_type;
+ } elsif ($test_type eq "bisect") {
+ $run_type = $bisect_type;
+ } elsif ($test_type eq "config_bisect") {
+ $run_type = $config_bisect_type;
+ } elsif ($test_type eq "make_min_config") {
+ $run_type = "";
+ } elsif ($test_type eq "make_warnings_file") {
+ $run_type = "";
+ }
+
+ # mistake in config file?
+ if (!defined($run_type)) {
+ $run_type = "ERROR";
+ }
+
+ my $installme = "";
+ $installme = " no_install" if ($no_install);
+
+ my $name = "";
+
+ if (defined($test_name)) {
+ $name = " ($test_name)";
+ }
+
+ doprint "\n\n";
+ doprint "RUNNING TEST $i of $opt{NUM_TESTS}$name with option $test_type $run_type$installme\n\n";
+
+ if (defined($pre_test)) {
+ run_command $pre_test;
+ }
+
+ unlink $dmesg;
+ unlink $buildlog;
+ unlink $testlog;
+
+ if (defined($addconfig)) {
+ my $min = $minconfig;
+ if (!defined($minconfig)) {
+ $min = "";
+ }
+ run_command "cat $addconfig $min > $tmpdir/add_config" or
+ dodie "Failed to create temp config";
+ $minconfig = "$tmpdir/add_config";
+ }
+
+ if (defined($checkout)) {
+ run_command "git checkout $checkout" or
+ die "failed to checkout $checkout";
+ }
+
+ $no_reboot = 0;
+
+ # A test may opt to not reboot the box
+ if ($reboot_on_success) {
+ $reboot_success = 1;
+ }
+
+ if ($test_type eq "bisect") {
+ bisect $i;
+ next;
+ } elsif ($test_type eq "config_bisect") {
+ config_bisect $i;
+ next;
+ } elsif ($test_type eq "patchcheck") {
+ patchcheck $i;
+ next;
+ } elsif ($test_type eq "make_min_config") {
+ make_min_config $i;
+ next;
+ } elsif ($test_type eq "make_warnings_file") {
+ $no_reboot = 1;
+ make_warnings_file $i;
+ next;
+ }
+
+ if ($build_type ne "nobuild") {
+ build $build_type or next;
+ check_buildlog or next;
+ }
+
+ if ($test_type eq "install") {
+ get_version;
+ install;
+ success $i;
+ next;
+ }
+
+ if ($test_type ne "build") {
+ my $failed = 0;
+ start_monitor_and_install or $failed = 1;
+
+ if (!$failed && $test_type ne "boot" && defined($run_test)) {
+ do_run_test or $failed = 1;
+ }
+ end_monitor;
+ if ($failed) {
+ print_times;
+ next;
+ }
+ }
+
+ print_times;
+
+ success $i;
+}
+
+if (defined($final_post_ktest)) {
+ run_command $final_post_ktest;
+}
+
+if ($opt{"POWEROFF_ON_SUCCESS"}) {
+ halt;
+} elsif ($opt{"REBOOT_ON_SUCCESS"} && !do_not_reboot && $reboot_success) {
+ reboot_to_good;
+} elsif (defined($switch_to_good)) {
+ # still need to get to the good kernel
+ run_command $switch_to_good;
+}
+
+
+doprint "\n $successes of $opt{NUM_TESTS} tests were successful\n\n";
+
+exit 0;
diff --git a/kernel/tools/testing/ktest/sample.conf b/kernel/tools/testing/ktest/sample.conf
new file mode 100644
index 000000000..6c58cd8bb
--- /dev/null
+++ b/kernel/tools/testing/ktest/sample.conf
@@ -0,0 +1,1288 @@
+#
+# Config file for ktest.pl
+#
+# Note, all paths must be absolute
+#
+
+# Options set in the beginning of the file are considered to be
+# default options. These options can be overriden by test specific
+# options, with the following exceptions:
+#
+# LOG_FILE
+# CLEAR_LOG
+# POWEROFF_ON_SUCCESS
+# REBOOT_ON_SUCCESS
+#
+# Test specific options are set after the label:
+#
+# TEST_START
+#
+# The options after a TEST_START label are specific to that test.
+# Each TEST_START label will set up a new test. If you want to
+# perform a test more than once, you can add the ITERATE label
+# to it followed by the number of times you want that test
+# to iterate. If the ITERATE is left off, the test will only
+# be performed once.
+#
+# TEST_START ITERATE 10
+#
+# You can skip a test by adding SKIP (before or after the ITERATE
+# and number)
+#
+# TEST_START SKIP
+#
+# TEST_START SKIP ITERATE 10
+#
+# TEST_START ITERATE 10 SKIP
+#
+# The SKIP label causes the options and the test itself to be ignored.
+# This is useful to set up several different tests in one config file, and
+# only enabling the ones you want to use for a current test run.
+#
+# You can add default options anywhere in the file as well
+# with the DEFAULTS tag. This allows you to have default options
+# after the test options to keep the test options at the top
+# of the file. You can even place the DEFAULTS tag between
+# test cases (but not in the middle of a single test case)
+#
+# TEST_START
+# MIN_CONFIG = /home/test/config-test1
+#
+# DEFAULTS
+# MIN_CONFIG = /home/test/config-default
+#
+# TEST_START ITERATE 10
+#
+# The above will run the first test with MIN_CONFIG set to
+# /home/test/config-test-1. Then 10 tests will be executed
+# with MIN_CONFIG with /home/test/config-default.
+#
+# You can also disable defaults with the SKIP option
+#
+# DEFAULTS SKIP
+# MIN_CONFIG = /home/test/config-use-sometimes
+#
+# DEFAULTS
+# MIN_CONFIG = /home/test/config-most-times
+#
+# The above will ignore the first MIN_CONFIG. If you want to
+# use the first MIN_CONFIG, remove the SKIP from the first
+# DEFAULTS tag and add it to the second. Be careful, options
+# may only be declared once per test or default. If you have
+# the same option name under the same test or as default
+# ktest will fail to execute, and no tests will run.
+#
+# DEFAULTS OVERRIDE
+#
+# Options defined in the DEFAULTS section can not be duplicated
+# even if they are defined in two different DEFAULT sections.
+# This is done to catch mistakes where an option is added but
+# the previous option was forgotten about and not commented.
+#
+# The OVERRIDE keyword can be added to a section to allow this
+# section to override other DEFAULT sections values that have
+# been defined previously. It will only override options that
+# have been defined before its use. Options defined later
+# in a non override section will still error. The same option
+# can not be defined in the same section even if that section
+# is marked OVERRIDE.
+#
+#
+#
+# Both TEST_START and DEFAULTS sections can also have the IF keyword
+# The value after the IF must evaluate into a 0 or non 0 positive
+# integer, and can use the config variables (explained below).
+#
+# DEFAULTS IF ${IS_X86_32}
+#
+# The above will process the DEFAULTS section if the config
+# variable IS_X86_32 evaluates to a non zero positive integer
+# otherwise if it evaluates to zero, it will act the same
+# as if the SKIP keyword was used.
+#
+# The ELSE keyword can be used directly after a section with
+# a IF statement.
+#
+# TEST_START IF ${RUN_NET_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# ELSE
+#
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-normal
+#
+#
+# The ELSE keyword can also contain an IF statement to allow multiple
+# if then else sections. But all the sections must be either
+# DEFAULT or TEST_START, they can not be a mixture.
+#
+# TEST_START IF ${RUN_NET_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# ELSE IF ${RUN_DISK_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-tests
+#
+# ELSE IF ${RUN_CPU_TESTS}
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-cpu
+#
+# ELSE
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-network
+#
+# The if statement may also have comparisons that will and for
+# == and !=, strings may be used for both sides.
+#
+# BOX_TYPE := x86_32
+#
+# DEFAULTS IF ${BOX_TYPE} == x86_32
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-32
+# ELSE
+# BUILD_TYPE = useconfig:${CONFIG_DIR}/config-64
+#
+# The DEFINED keyword can be used by the IF statements too.
+# It returns true if the given config variable or option has been defined
+# or false otherwise.
+#
+#
+# DEFAULTS IF DEFINED USE_CC
+# CC := ${USE_CC}
+# ELSE
+# CC := gcc
+#
+#
+# As well as NOT DEFINED.
+#
+# DEFAULTS IF NOT DEFINED MAKE_CMD
+# MAKE_CMD := make ARCH=x86
+#
+#
+# And/or ops (&&,||) may also be used to make complex conditionals.
+#
+# TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf
+#
+# Notice the use of parentheses. Without any parentheses the above would be
+# processed the same as:
+#
+# TEST_START IF DEFINED ALL_TESTS || (${MYTEST} == boottest && ${MACHINE} == gandalf)
+#
+#
+#
+# INCLUDE file
+#
+# The INCLUDE keyword may be used in DEFAULT sections. This will
+# read another config file and process that file as well. The included
+# file can include other files, add new test cases or default
+# statements. Config variables will be passed to these files and changes
+# to config variables will be seen by top level config files. Including
+# a file is processed just like the contents of the file was cut and pasted
+# into the top level file, except, that include files that end with
+# TEST_START sections will have that section ended at the end of
+# the include file. That is, an included file is included followed
+# by another DEFAULT keyword.
+#
+# Unlike other files referenced in this config, the file path does not need
+# to be absolute. If the file does not start with '/', then the directory
+# that the current config file was located in is used. If no config by the
+# given name is found there, then the current directory is searched.
+#
+# INCLUDE myfile
+# DEFAULT
+#
+# is the same as:
+#
+# INCLUDE myfile
+#
+# Note, if the include file does not contain a full path, the file is
+# searched first by the location of the original include file, and then
+# by the location that ktest.pl was executed in.
+#
+
+#### Config variables ####
+#
+# This config file can also contain "config variables".
+# These are assigned with ":=" instead of the ktest option
+# assigment "=".
+#
+# The difference between ktest options and config variables
+# is that config variables can be used multiple times,
+# where each instance will override the previous instance.
+# And that they only live at time of processing this config.
+#
+# The advantage to config variables are that they can be used
+# by any option or any other config variables to define thing
+# that you may use over and over again in the options.
+#
+# For example:
+#
+# USER := root
+# TARGET := mybox
+# TEST_CASE := ssh ${USER}@${TARGET} /path/to/my/test
+#
+# TEST_START
+# MIN_CONFIG = config1
+# TEST = ${TEST_CASE}
+#
+# TEST_START
+# MIN_CONFIG = config2
+# TEST = ${TEST_CASE}
+#
+# TEST_CASE := ssh ${USER}@${TARGET} /path/to/my/test2
+#
+# TEST_START
+# MIN_CONFIG = config1
+# TEST = ${TEST_CASE}
+#
+# TEST_START
+# MIN_CONFIG = config2
+# TEST = ${TEST_CASE}
+#
+# TEST_DIR := /home/me/test
+#
+# BUILD_DIR = ${TEST_DIR}/linux.git
+# OUTPUT_DIR = ${TEST_DIR}/test
+#
+# Note, the config variables are evaluated immediately, thus
+# updating TARGET after TEST_CASE has been assigned does nothing
+# to TEST_CASE.
+#
+# As shown in the example, to evaluate a config variable, you
+# use the ${X} convention. Simple $X will not work.
+#
+# If the config variable does not exist, the ${X} will not
+# be evaluated. Thus:
+#
+# MAKE_CMD = PATH=/mypath:${PATH} make
+#
+# If PATH is not a config variable, then the ${PATH} in
+# the MAKE_CMD option will be evaluated by the shell when
+# the MAKE_CMD option is passed into shell processing.
+
+#### Using options in other options ####
+#
+# Options that are defined in the config file may also be used
+# by other options. All options are evaulated at time of
+# use (except that config variables are evaluated at config
+# processing time).
+#
+# If an ktest option is used within another option, instead of
+# typing it again in that option you can simply use the option
+# just like you can config variables.
+#
+# MACHINE = mybox
+#
+# TEST = ssh root@${MACHINE} /path/to/test
+#
+# The option will be used per test case. Thus:
+#
+# TEST_TYPE = test
+# TEST = ssh root@{MACHINE}
+#
+# TEST_START
+# MACHINE = box1
+#
+# TEST_START
+# MACHINE = box2
+#
+# For both test cases, MACHINE will be evaluated at the time
+# of the test case. The first test will run ssh root@box1
+# and the second will run ssh root@box2.
+
+#### Mandatory Default Options ####
+
+# These options must be in the default section, although most
+# may be overridden by test options.
+
+# The machine hostname that you will test
+#MACHINE = target
+
+# The box is expected to have ssh on normal bootup, provide the user
+# (most likely root, since you need privileged operations)
+#SSH_USER = root
+
+# The directory that contains the Linux source code
+#BUILD_DIR = /home/test/linux.git
+
+# The directory that the objects will be built
+# (can not be same as BUILD_DIR)
+#OUTPUT_DIR = /home/test/build/target
+
+# The location of the compiled file to copy to the target
+# (relative to OUTPUT_DIR)
+#BUILD_TARGET = arch/x86/boot/bzImage
+
+# The place to put your image on the test machine
+#TARGET_IMAGE = /boot/vmlinuz-test
+
+# A script or command to reboot the box
+#
+# Here is a digital loggers power switch example
+#POWER_CYCLE = wget --no-proxy -O /dev/null -q --auth-no-challenge 'http://admin:admin@power/outlet?5=CCL'
+#
+# Here is an example to reboot a virtual box on the current host
+# with the name "Guest".
+#POWER_CYCLE = virsh destroy Guest; sleep 5; virsh start Guest
+
+# The script or command that reads the console
+#
+# If you use ttywatch server, something like the following would work.
+#CONSOLE = nc -d localhost 3001
+#
+# For a virtual machine with guest name "Guest".
+#CONSOLE = virsh console Guest
+
+# Signal to send to kill console.
+# ktest.pl will create a child process to monitor the console.
+# When the console is finished, ktest will kill the child process
+# with this signal.
+# (default INT)
+#CLOSE_CONSOLE_SIGNAL = HUP
+
+# Required version ending to differentiate the test
+# from other linux builds on the system.
+#LOCALVERSION = -test
+
+# For REBOOT_TYPE = grub2, you must specify where the grub.cfg
+# file is. This is the file that is searched to find the menu
+# option to boot to with GRUB_REBOOT
+#GRUB_FILE = /boot/grub2/grub.cfg
+
+# The tool for REBOOT_TYPE = grub2 to set the next reboot kernel
+# to boot into (one shot mode).
+# (default grub2_reboot)
+#GRUB_REBOOT = grub2_reboot
+
+# The grub title name for the test kernel to boot
+# (Only mandatory if REBOOT_TYPE = grub or grub2)
+#
+# Note, ktest.pl will not update the grub menu.lst, you need to
+# manually add an option for the test. ktest.pl will search
+# the grub menu.lst for this option to find what kernel to
+# reboot into.
+#
+# For example, if in the /boot/grub/menu.lst the test kernel title has:
+# title Test Kernel
+# kernel vmlinuz-test
+#
+# For grub2, a search of top level "menuentry"s are done. No
+# submenu is searched. The menu is found by searching for the
+# contents of GRUB_MENU in the line that starts with "menuentry".
+# You may want to include the quotes around the option. For example:
+# for: menuentry 'Test Kernel'
+# do a: GRUB_MENU = 'Test Kernel'
+# For customizing, add your entry in /etc/grub.d/40_custom.
+#
+#GRUB_MENU = Test Kernel
+
+# For REBOOT_TYPE = syslinux, the name of the syslinux executable
+# (on the target) to use to set up the next reboot to boot the
+# test kernel.
+# (default extlinux)
+#SYSLINUX = syslinux
+
+# For REBOOT_TYPE = syslinux, the path that is passed to to the
+# syslinux command where syslinux is installed.
+# (default /boot/extlinux)
+#SYSLINUX_PATH = /boot/syslinux
+
+# For REBOOT_TYPE = syslinux, the syslinux label that references the
+# test kernel in the syslinux config file.
+# (default undefined)
+#SYSLINUX_LABEL = "test-kernel"
+
+# A script to reboot the target into the test kernel
+# This and SWITCH_TO_TEST are about the same, except
+# SWITCH_TO_TEST is run even for REBOOT_TYPE = grub.
+# This may be left undefined.
+# (default undefined)
+#REBOOT_SCRIPT =
+
+#### Optional Config Options (all have defaults) ####
+
+# Start a test setup. If you leave this off, all options
+# will be default and the test will run once.
+# This is a label and not really an option (it takes no value).
+# You can append ITERATE and a number after it to iterate the
+# test a number of times, or SKIP to ignore this test.
+#
+#TEST_START
+#TEST_START ITERATE 5
+#TEST_START SKIP
+
+# Have the following options as default again. Used after tests
+# have already been defined by TEST_START. Optionally, you can
+# just define all default options before the first TEST_START
+# and you do not need this option.
+#
+# This is a label and not really an option (it takes no value).
+# You can append SKIP to this label and the options within this
+# section will be ignored.
+#
+# DEFAULTS
+# DEFAULTS SKIP
+
+# If you want to execute some command before the first test runs
+# you can set this option. Note, it can be set as a default option
+# or an option in the first test case. All other test cases will
+# ignore it. If both the default and first test have this option
+# set, then the first test will take precedence.
+#
+# default (undefined)
+#PRE_KTEST = ${SSH} ~/set_up_test
+
+# If you want to execute some command after all the tests have
+# completed, you can set this option. Note, it can be set as a
+# default or any test case can override it. If multiple test cases
+# set this option, then the last test case that set it will take
+# precedence
+#
+# default (undefined)
+#POST_KTEST = ${SSH} ~/dismantle_test
+
+# The default test type (default test)
+# The test types may be:
+# build - only build the kernel, do nothing else
+# install - build and install, but do nothing else (does not reboot)
+# boot - build, install, and boot the kernel
+# test - build, boot and if TEST is set, run the test script
+# (If TEST is not set, it defaults back to boot)
+# bisect - Perform a bisect on the kernel (see BISECT_TYPE below)
+# patchcheck - Do a test on a series of commits in git (see PATCHCHECK below)
+#TEST_TYPE = test
+
+# Test to run if there is a successful boot and TEST_TYPE is test.
+# Must exit with 0 on success and non zero on error
+# default (undefined)
+#TEST = ssh user@machine /root/run_test
+
+# The build type is any make config type or special command
+# (default randconfig)
+# nobuild - skip the clean and build step
+# useconfig:/path/to/config - use the given config and run
+# oldconfig on it.
+# This option is ignored if TEST_TYPE is patchcheck or bisect
+#BUILD_TYPE = randconfig
+
+# The make command (default make)
+# If you are building a 32bit x86 on a 64 bit host
+#MAKE_CMD = CC=i386-gcc AS=i386-as make ARCH=i386
+
+# Any build options for the make of the kernel (not for other makes, like configs)
+# (default "")
+#BUILD_OPTIONS = -j20
+
+# If you need to do some special handling before installing
+# you can add a script with this option.
+# The environment variable KERNEL_VERSION will be set to the
+# kernel version that is used.
+#
+# default (undefined)
+#PRE_INSTALL = ssh user@target rm -rf '/lib/modules/*-test*'
+
+# If you need an initrd, you can add a script or code here to install
+# it. The environment variable KERNEL_VERSION will be set to the
+# kernel version that is used. Remember to add the initrd line
+# to your grub menu.lst file.
+#
+# Here's a couple of examples to use:
+#POST_INSTALL = ssh user@target /sbin/mkinitrd --allow-missing -f /boot/initramfs-test.img $KERNEL_VERSION
+#
+# or on some systems:
+#POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION
+
+# If for some reason you just want to boot the kernel and you do not
+# want the test to install anything new. For example, you may just want
+# to boot test the same kernel over and over and do not want to go through
+# the hassle of installing anything, you can set this option to 1
+# (default 0)
+#NO_INSTALL = 1
+
+# If there is a command that you want to run before the individual test
+# case executes, then you can set this option
+#
+# default (undefined)
+#PRE_TEST = ${SSH} reboot_to_special_kernel
+
+# If there is a command you want to run after the individual test case
+# completes, then you can set this option.
+#
+# default (undefined)
+#POST_TEST = cd ${BUILD_DIR}; git reset --hard
+
+# If there is a script that you require to run before the build is done
+# you can specify it with PRE_BUILD.
+#
+# One example may be if you must add a temporary patch to the build to
+# fix a unrelated bug to perform a patchcheck test. This will apply the
+# patch before each build that is made. Use the POST_BUILD to do a git reset --hard
+# to remove the patch.
+#
+# (default undef)
+#PRE_BUILD = cd ${BUILD_DIR} && patch -p1 < /tmp/temp.patch
+
+# To specify if the test should fail if the PRE_BUILD fails,
+# PRE_BUILD_DIE needs to be set to 1. Otherwise the PRE_BUILD
+# result is ignored.
+# (default 0)
+# PRE_BUILD_DIE = 1
+
+# If there is a script that should run after the build is done
+# you can specify it with POST_BUILD.
+#
+# As the example in PRE_BUILD, POST_BUILD can be used to reset modifications
+# made by the PRE_BUILD.
+#
+# (default undef)
+#POST_BUILD = cd ${BUILD_DIR} && git reset --hard
+
+# To specify if the test should fail if the POST_BUILD fails,
+# POST_BUILD_DIE needs to be set to 1. Otherwise the POST_BUILD
+# result is ignored.
+# (default 0)
+#POST_BUILD_DIE = 1
+
+# Way to reboot the box to the test kernel.
+# Only valid options so far are "grub", "grub2", "syslinux" and "script"
+# (default grub)
+# If you specify grub, it will assume grub version 1
+# and will search in /boot/grub/menu.lst for the title $GRUB_MENU
+# and select that target to reboot to the kernel. If this is not
+# your setup, then specify "script" and have a command or script
+# specified in REBOOT_SCRIPT to boot to the target.
+#
+# For REBOOT_TYPE = grub2, you must define both GRUB_MENU and
+# GRUB_FILE.
+#
+# For REBOOT_TYPE = syslinux, you must define SYSLINUX_LABEL, and
+# perhaps modify SYSLINUX (default extlinux) and SYSLINUX_PATH
+# (default /boot/extlinux)
+#
+# The entry in /boot/grub/menu.lst must be entered in manually.
+# The test will not modify that file.
+#REBOOT_TYPE = grub
+
+# If you are using a machine that doesn't boot with grub, and
+# perhaps gets its kernel from a remote server (tftp), then
+# you can use this option to update the target image with the
+# test image.
+#
+# You could also do the same with POST_INSTALL, but the difference
+# between that option and this option is that POST_INSTALL runs
+# after the install, where this one runs just before a reboot.
+# (default undefined)
+#SWITCH_TO_TEST = cp ${OUTPUT_DIR}/${BUILD_TARGET} ${TARGET_IMAGE}
+
+# If you are using a machine that doesn't boot with grub, and
+# perhaps gets its kernel from a remote server (tftp), then
+# you can use this option to update the target image with the
+# the known good image to reboot safely back into.
+#
+# This option holds a command that will execute before needing
+# to reboot to a good known image.
+# (default undefined)
+#SWITCH_TO_GOOD = ssh ${SSH_USER}/${MACHINE} cp good_image ${TARGET_IMAGE}
+
+# The min config that is needed to build for the machine
+# A nice way to create this is with the following:
+#
+# $ ssh target
+# $ lsmod > mymods
+# $ scp mymods host:/tmp
+# $ exit
+# $ cd linux.git
+# $ rm .config
+# $ make LSMOD=mymods localyesconfig
+# $ grep '^CONFIG' .config > /home/test/config-min
+#
+# If you want even less configs:
+#
+# log in directly to target (do not ssh)
+#
+# $ su
+# # lsmod | cut -d' ' -f1 | xargs rmmod
+#
+# repeat the above several times
+#
+# # lsmod > mymods
+# # reboot
+#
+# May need to reboot to get your network back to copy the mymods
+# to the host, and then remove the previous .config and run the
+# localyesconfig again. The CONFIG_MIN generated like this will
+# not guarantee network activity to the box so the TEST_TYPE of
+# test may fail.
+#
+# You might also want to set:
+# CONFIG_CMDLINE="<your options here>"
+# randconfig may set the above and override your real command
+# line options.
+# (default undefined)
+#MIN_CONFIG = /home/test/config-min
+
+# Sometimes there's options that just break the boot and
+# you do not care about. Here are a few:
+# # CONFIG_STAGING is not set
+# Staging drivers are horrible, and can break the build.
+# # CONFIG_SCSI_DEBUG is not set
+# SCSI_DEBUG may change your root partition
+# # CONFIG_KGDB_SERIAL_CONSOLE is not set
+# KGDB may cause oops waiting for a connection that's not there.
+# This option points to the file containing config options that will be prepended
+# to the MIN_CONFIG (or be the MIN_CONFIG if it is not set)
+#
+# Note, config options in MIN_CONFIG will override these options.
+#
+# (default undefined)
+#ADD_CONFIG = /home/test/config-broken
+
+# The location on the host where to write temp files
+# (default /tmp/ktest/${MACHINE})
+#TMP_DIR = /tmp/ktest/${MACHINE}
+
+# Optional log file to write the status (recommended)
+# Note, this is a DEFAULT section only option.
+# (default undefined)
+#LOG_FILE = /home/test/logfiles/target.log
+
+# Remove old logfile if it exists before starting all tests.
+# Note, this is a DEFAULT section only option.
+# (default 0)
+#CLEAR_LOG = 0
+
+# Line to define a successful boot up in console output.
+# This is what the line contains, not the entire line. If you need
+# the entire line to match, then use regural expression syntax like:
+# (do not add any quotes around it)
+#
+# SUCCESS_LINE = ^MyBox Login:$
+#
+# (default "login:")
+#SUCCESS_LINE = login:
+
+# To speed up between reboots, defining a line that the
+# default kernel produces that represents that the default
+# kernel has successfully booted and can be used to pass
+# a new test kernel to it. Otherwise ktest.pl will wait till
+# SLEEP_TIME to continue.
+# (default undefined)
+#REBOOT_SUCCESS_LINE = login:
+
+# In case the console constantly fills the screen, having
+# a specified time to stop the test after success is recommended.
+# (in seconds)
+# (default 10)
+#STOP_AFTER_SUCCESS = 10
+
+# In case the console constantly fills the screen, having
+# a specified time to stop the test after failure is recommended.
+# (in seconds)
+# (default 60)
+#STOP_AFTER_FAILURE = 60
+
+# In case the console constantly fills the screen, having
+# a specified time to stop the test if it never succeeds nor fails
+# is recommended.
+# Note: this is ignored if a success or failure is detected.
+# (in seconds)
+# (default 600, -1 is to never stop)
+#STOP_TEST_AFTER = 600
+
+# Stop testing if a build fails. If set, the script will end if
+# a failure is detected, otherwise it will save off the .config,
+# dmesg and bootlog in a directory called
+# MACHINE-TEST_TYPE_BUILD_TYPE-fail-yyyymmddhhmmss
+# if the STORE_FAILURES directory is set.
+# (default 1)
+# Note, even if this is set to zero, there are some errors that still
+# stop the tests.
+#DIE_ON_FAILURE = 1
+
+# Directory to store failure directories on failure. If this is not
+# set, DIE_ON_FAILURE=0 will not save off the .config, dmesg and
+# bootlog. This option is ignored if DIE_ON_FAILURE is not set.
+# (default undefined)
+#STORE_FAILURES = /home/test/failures
+
+# Directory to store success directories on success. If this is not
+# set, the .config, dmesg and bootlog will not be saved if a
+# test succeeds.
+# (default undefined)
+#STORE_SUCCESSES = /home/test/successes
+
+# Build without doing a make mrproper, or removing .config
+# (default 0)
+#BUILD_NOCLEAN = 0
+
+# As the test reads the console, after it hits the SUCCESS_LINE
+# the time it waits for the monitor to settle down between reads
+# can usually be lowered.
+# (in seconds) (default 1)
+#BOOTED_TIMEOUT = 1
+
+# The timeout in seconds when we consider the box hung after
+# the console stop producing output. Be sure to leave enough
+# time here to get pass a reboot. Some machines may not produce
+# any console output for a long time during a reboot. You do
+# not want the test to fail just because the system was in
+# the process of rebooting to the test kernel.
+# (default 120)
+#TIMEOUT = 120
+
+# In between tests, a reboot of the box may occur, and this
+# is the time to wait for the console after it stops producing
+# output. Some machines may not produce a large lag on reboot
+# so this should accommodate it.
+# The difference between this and TIMEOUT, is that TIMEOUT happens
+# when rebooting to the test kernel. This sleep time happens
+# after a test has completed and we are about to start running
+# another test. If a reboot to the reliable kernel happens,
+# we wait SLEEP_TIME for the console to stop producing output
+# before starting the next test.
+#
+# You can speed up reboot times even more by setting REBOOT_SUCCESS_LINE.
+# (default 60)
+#SLEEP_TIME = 60
+
+# The time in between bisects to sleep (in seconds)
+# (default 60)
+#BISECT_SLEEP_TIME = 60
+
+# The max wait time (in seconds) for waiting for the console to finish.
+# If for some reason, the console is outputting content without
+# ever finishing, this will cause ktest to get stuck. This
+# option is the max time ktest will wait for the monitor (console)
+# to settle down before continuing.
+# (default 1800)
+#MAX_MONITOR_WAIT
+
+# The time in between patch checks to sleep (in seconds)
+# (default 60)
+#PATCHCHECK_SLEEP_TIME = 60
+
+# Reboot the target box on error (default 0)
+#REBOOT_ON_ERROR = 0
+
+# Power off the target on error (ignored if REBOOT_ON_ERROR is set)
+# Note, this is a DEFAULT section only option.
+# (default 0)
+#POWEROFF_ON_ERROR = 0
+
+# Power off the target after all tests have completed successfully
+# Note, this is a DEFAULT section only option.
+# (default 0)
+#POWEROFF_ON_SUCCESS = 0
+
+# Reboot the target after all test completed successfully (default 1)
+# (ignored if POWEROFF_ON_SUCCESS is set)
+#REBOOT_ON_SUCCESS = 1
+
+# In case there are isses with rebooting, you can specify this
+# to always powercycle after this amount of time after calling
+# reboot.
+# Note, POWERCYCLE_AFTER_REBOOT = 0 does NOT disable it. It just
+# makes it powercycle immediately after rebooting. Do not define
+# it if you do not want it.
+# (default undefined)
+#POWERCYCLE_AFTER_REBOOT = 5
+
+# In case there's isses with halting, you can specify this
+# to always poweroff after this amount of time after calling
+# halt.
+# Note, POWEROFF_AFTER_HALT = 0 does NOT disable it. It just
+# makes it poweroff immediately after halting. Do not define
+# it if you do not want it.
+# (default undefined)
+#POWEROFF_AFTER_HALT = 20
+
+# A script or command to power off the box (default undefined)
+# Needed for POWEROFF_ON_ERROR and SUCCESS
+#
+# Example for digital loggers power switch:
+#POWER_OFF = wget --no-proxy -O /dev/null -q --auth-no-challenge 'http://admin:admin@power/outlet?5=OFF'
+#
+# Example for a virtual guest call "Guest".
+#POWER_OFF = virsh destroy Guest
+
+# To have the build fail on "new" warnings, create a file that
+# contains a list of all known warnings (they must match exactly
+# to the line with 'warning:', 'error:' or 'Error:'. If the option
+# WARNINGS_FILE is set, then that file will be read, and if the
+# build detects a warning, it will examine this file and if the
+# warning does not exist in it, it will fail the build.
+#
+# Note, if this option is defined to a file that does not exist
+# then any warning will fail the build.
+# (see make_warnings_file below)
+#
+# (optional, default undefined)
+#WARNINGS_FILE = ${OUTPUT_DIR}/warnings_file
+
+# The way to execute a command on the target
+# (default ssh $SSH_USER@$MACHINE $SSH_COMMAND";)
+# The variables SSH_USER, MACHINE and SSH_COMMAND are defined
+#SSH_EXEC = ssh $SSH_USER@$MACHINE $SSH_COMMAND";
+
+# The way to copy a file to the target (install and modules)
+# (default scp $SRC_FILE $SSH_USER@$MACHINE:$DST_FILE)
+# The variables SSH_USER, MACHINE are defined by the config
+# SRC_FILE and DST_FILE are ktest internal variables and
+# should only have '$' and not the '${}' notation.
+# (default scp $SRC_FILE ${SSH_USER}@${MACHINE}:$DST_FILE)
+#SCP_TO_TARGET = echo skip scp for $SRC_FILE $DST_FILE
+
+# If install needs to be different than modules, then this
+# option will override the SCP_TO_TARGET for installation.
+# (default ${SCP_TO_TARGET} )
+#SCP_TO_TARGET_INSTALL = scp $SRC_FILE tftp@tftpserver:$DST_FILE
+
+# The nice way to reboot the target
+# (default ssh $SSH_USER@$MACHINE reboot)
+# The variables SSH_USER and MACHINE are defined.
+#REBOOT = ssh $SSH_USER@$MACHINE reboot
+
+# The way triple faults are detected is by testing the kernel
+# banner. If the kernel banner for the kernel we are testing is
+# found, and then later a kernel banner for another kernel version
+# is found, it is considered that we encountered a triple fault,
+# and there is no panic or callback, but simply a reboot.
+# To disable this (because it did a false positive) set the following
+# to 0.
+# (default 1)
+#DETECT_TRIPLE_FAULT = 0
+
+# All options in the config file should be either used by ktest
+# or could be used within a value of another option. If an option
+# in the config file is not used, ktest will warn about it and ask
+# if you want to continue.
+#
+# If you don't care if there are non-used options, enable this
+# option. Be careful though, a non-used option is usually a sign
+# of an option name being typed incorrectly.
+# (default 0)
+#IGNORE_UNUSED = 1
+
+# When testing a kernel that happens to have WARNINGs, and call
+# traces, ktest.pl will detect these and fail a boot or test run
+# due to warnings. By setting this option, ktest will ignore
+# call traces, and will not fail a test if the kernel produces
+# an oops. Use this option with care.
+# (default 0)
+#IGNORE_ERRORS = 1
+
+#### Per test run options ####
+# The following options are only allowed in TEST_START sections.
+# They are ignored in the DEFAULTS sections.
+#
+# All of these are optional and undefined by default, although
+# some of these options are required for TEST_TYPE of patchcheck
+# and bisect.
+#
+#
+# CHECKOUT = branch
+#
+# If the BUILD_DIR is a git repository, then you can set this option
+# to checkout the given branch before running the TEST. If you
+# specify this for the first run, that branch will be used for
+# all preceding tests until a new CHECKOUT is set.
+#
+#
+# TEST_NAME = name
+#
+# If you want the test to have a name that is displayed in
+# the test result banner at the end of the test, then use this
+# option. This is useful to search for the RESULT keyword and
+# not have to translate a test number to a test in the config.
+#
+# For TEST_TYPE = patchcheck
+#
+# This expects the BUILD_DIR to be a git repository, and
+# will checkout the PATCHCHECK_START commit.
+#
+# The option BUILD_TYPE will be ignored.
+#
+# The MIN_CONFIG will be used for all builds of the patchcheck. The build type
+# used for patchcheck is oldconfig.
+#
+# PATCHCHECK_START is required and is the first patch to
+# test (the SHA1 of the commit). You may also specify anything
+# that git checkout allows (branch name, tage, HEAD~3).
+#
+# PATCHCHECK_END is the last patch to check (default HEAD)
+#
+# PATCHCHECK_CHERRY if set to non zero, then git cherry will be
+# performed against PATCHCHECK_START and PATCHCHECK_END. That is
+#
+# git cherry ${PATCHCHECK_START} ${PATCHCHECK_END}
+#
+# Then the changes found will be tested.
+#
+# Note, PATCHCHECK_CHERRY requires PATCHCHECK_END to be defined.
+# (default 0)
+#
+# PATCHCHECK_TYPE is required and is the type of test to run:
+# build, boot, test.
+#
+# Note, the build test will look for warnings, if a warning occurred
+# in a file that a commit touches, the build will fail, unless
+# IGNORE_WARNINGS is set for the given commit's sha1
+#
+# IGNORE_WARNINGS can be used to disable the failure of patchcheck
+# on a particuler commit (SHA1). You can add more than one commit
+# by adding a list of SHA1s that are space delimited.
+#
+# If BUILD_NOCLEAN is set, then make mrproper will not be run on
+# any of the builds, just like all other TEST_TYPE tests. But
+# what makes patchcheck different from the other tests, is if
+# BUILD_NOCLEAN is not set, only the first and last patch run
+# make mrproper. This helps speed up the test.
+#
+# Example:
+# TEST_START
+# TEST_TYPE = patchcheck
+# CHECKOUT = mybranch
+# PATCHCHECK_TYPE = boot
+# PATCHCHECK_START = 747e94ae3d1b4c9bf5380e569f614eb9040b79e7
+# PATCHCHECK_END = HEAD~2
+# IGNORE_WARNINGS = 42f9c6b69b54946ffc0515f57d01dc7f5c0e4712 0c17ca2c7187f431d8ffc79e81addc730f33d128
+#
+#
+#
+# For TEST_TYPE = bisect
+#
+# You can specify a git bisect if the BUILD_DIR is a git repository.
+# The MIN_CONFIG will be used for all builds of the bisect. The build type
+# used for bisecting is oldconfig.
+#
+# The option BUILD_TYPE will be ignored.
+#
+# BISECT_TYPE is the type of test to perform:
+# build - bad fails to build
+# boot - bad builds but fails to boot
+# test - bad boots but fails a test
+#
+# BISECT_GOOD is the commit (SHA1) to label as good (accepts all git good commit types)
+# BISECT_BAD is the commit to label as bad (accepts all git bad commit types)
+#
+# The above three options are required for a bisect operation.
+#
+# BISECT_REPLAY = /path/to/replay/file (optional, default undefined)
+#
+# If an operation failed in the bisect that was not expected to
+# fail. Then the test ends. The state of the BUILD_DIR will be
+# left off at where the failure occurred. You can examine the
+# reason for the failure, and perhaps even find a git commit
+# that would work to continue with. You can run:
+#
+# git bisect log > /path/to/replay/file
+#
+# The adding:
+#
+# BISECT_REPLAY= /path/to/replay/file
+#
+# And running the test again. The test will perform the initial
+# git bisect start, git bisect good, and git bisect bad, and
+# then it will run git bisect replay on this file, before
+# continuing with the bisect.
+#
+# BISECT_START = commit (optional, default undefined)
+#
+# As with BISECT_REPLAY, if the test failed on a commit that
+# just happen to have a bad commit in the middle of the bisect,
+# and you need to skip it. If BISECT_START is defined, it
+# will checkout that commit after doing the initial git bisect start,
+# git bisect good, git bisect bad, and running the git bisect replay
+# if the BISECT_REPLAY is set.
+#
+# BISECT_SKIP = 1 (optional, default 0)
+#
+# If BISECT_TYPE is set to test but the build fails, ktest will
+# simply fail the test and end their. You could use BISECT_REPLAY
+# and BISECT_START to resume after you found a new starting point,
+# or you could set BISECT_SKIP to 1. If BISECT_SKIP is set to 1,
+# when something other than the BISECT_TYPE fails, ktest.pl will
+# run "git bisect skip" and try again.
+#
+# BISECT_FILES = <path> (optional, default undefined)
+#
+# To just run the git bisect on a specific path, set BISECT_FILES.
+# For example:
+#
+# BISECT_FILES = arch/x86 kernel/time
+#
+# Will run the bisect with "git bisect start -- arch/x86 kernel/time"
+#
+# BISECT_REVERSE = 1 (optional, default 0)
+#
+# In those strange instances where it was broken forever
+# and you are trying to find where it started to work!
+# Set BISECT_GOOD to the commit that was last known to fail
+# Set BISECT_BAD to the commit that is known to start working.
+# With BISECT_REVERSE = 1, The test will consider failures as
+# good, and success as bad.
+#
+# BISECT_MANUAL = 1 (optional, default 0)
+#
+# In case there's a problem with automating the bisect for
+# whatever reason. (Can't reboot, want to inspect each iteration)
+# Doing a BISECT_MANUAL will have the test wait for you to
+# tell it if the test passed or failed after each iteration.
+# This is basicall the same as running git bisect yourself
+# but ktest will rebuild and install the kernel for you.
+#
+# BISECT_CHECK = 1 (optional, default 0)
+#
+# Just to be sure the good is good and bad is bad, setting
+# BISECT_CHECK to 1 will start the bisect by first checking
+# out BISECT_BAD and makes sure it fails, then it will check
+# out BISECT_GOOD and makes sure it succeeds before starting
+# the bisect (it works for BISECT_REVERSE too).
+#
+# You can limit the test to just check BISECT_GOOD or
+# BISECT_BAD with BISECT_CHECK = good or
+# BISECT_CHECK = bad, respectively.
+#
+# BISECT_TRIES = 5 (optional, default 1)
+#
+# For those cases that it takes several tries to hit a bug,
+# the BISECT_TRIES is useful. It is the number of times the
+# test is ran before it says the kernel is good. The first failure
+# will stop trying and mark the current SHA1 as bad.
+#
+# Note, as with all race bugs, there's no guarantee that if
+# it succeeds, it is really a good bisect. But it helps in case
+# the bug is some what reliable.
+#
+# You can set BISECT_TRIES to zero, and all tests will be considered
+# good, unless you also set BISECT_MANUAL.
+#
+# BISECT_RET_GOOD = 0 (optional, default undefined)
+#
+# In case the specificed test returns something other than just
+# 0 for good, and non-zero for bad, you can override 0 being
+# good by defining BISECT_RET_GOOD.
+#
+# BISECT_RET_BAD = 1 (optional, default undefined)
+#
+# In case the specificed test returns something other than just
+# 0 for good, and non-zero for bad, you can override non-zero being
+# bad by defining BISECT_RET_BAD.
+#
+# BISECT_RET_ABORT = 255 (optional, default undefined)
+#
+# If you need to abort the bisect if the test discovers something
+# that was wrong, you can define BISECT_RET_ABORT to be the error
+# code returned by the test in order to abort the bisect.
+#
+# BISECT_RET_SKIP = 2 (optional, default undefined)
+#
+# If the test detects that the current commit is neither good
+# nor bad, but something else happened (another bug detected)
+# you can specify BISECT_RET_SKIP to an error code that the
+# test returns when it should skip the current commit.
+#
+# BISECT_RET_DEFAULT = good (optional, default undefined)
+#
+# You can override the default of what to do when the above
+# options are not hit. This may be one of, "good", "bad",
+# "abort" or "skip" (without the quotes).
+#
+# Note, if you do not define any of the previous BISECT_RET_*
+# and define BISECT_RET_DEFAULT, all bisects results will do
+# what the BISECT_RET_DEFAULT has.
+#
+#
+# Example:
+# TEST_START
+# TEST_TYPE = bisect
+# BISECT_GOOD = v2.6.36
+# BISECT_BAD = b5153163ed580e00c67bdfecb02b2e3843817b3e
+# BISECT_TYPE = build
+# MIN_CONFIG = /home/test/config-bisect
+#
+#
+#
+# For TEST_TYPE = config_bisect
+#
+# In those cases that you have two different configs. One of them
+# work, the other does not, and you do not know what config causes
+# the problem.
+# The TEST_TYPE config_bisect will bisect the bad config looking for
+# what config causes the failure.
+#
+# The way it works is this:
+#
+# You can specify a good config with CONFIG_BISECT_GOOD, otherwise it
+# will use the MIN_CONFIG, and if that's not specified, it will use
+# the config that comes with "make defconfig".
+#
+# It runs both the good and bad configs through a make oldconfig to
+# make sure that they are set up for the kernel that is checked out.
+#
+# It then reads the configs that are set, as well as the ones that are
+# not set for both the good and bad configs, and then compares them.
+# It will set half of the good configs within the bad config (note,
+# "set" means to make the bad config match the good config, a config
+# in the good config that is off, will be turned off in the bad
+# config. That is considered a "set").
+#
+# It tests this new config and if it works, it becomes the new good
+# config, otherwise it becomes the new bad config. It continues this
+# process until there's only one config left and it will report that
+# config.
+#
+# The "bad config" can also be a config that is needed to boot but was
+# disabled because it depended on something that wasn't set.
+#
+# During this process, it saves the current good and bad configs in
+# ${TMP_DIR}/good_config and ${TMP_DIR}/bad_config respectively.
+# If you stop the test, you can copy them to a new location to
+# reuse them again.
+#
+# Although the MIN_CONFIG may be the config it starts with, the
+# MIN_CONFIG is ignored.
+#
+# The option BUILD_TYPE will be ignored.
+#
+# CONFIG_BISECT_TYPE is the type of test to perform:
+# build - bad fails to build
+# boot - bad builds but fails to boot
+# test - bad boots but fails a test
+#
+# CONFIG_BISECT is the config that failed to boot
+#
+# If BISECT_MANUAL is set, it will pause between iterations.
+# This is useful to use just ktest.pl just for the config bisect.
+# If you set it to build, it will run the bisect and you can
+# control what happens in between iterations. It will ask you if
+# the test succeeded or not and continue the config bisect.
+#
+# CONFIG_BISECT_GOOD (optional)
+# If you have a good config to start with, then you
+# can specify it with CONFIG_BISECT_GOOD. Otherwise
+# the MIN_CONFIG is the base, if MIN_CONFIG is not set
+# It will build a config with "make defconfig"
+#
+# CONFIG_BISECT_CHECK (optional)
+# Set this to 1 if you want to confirm that the config ktest
+# generates (the bad config with the min config) is still bad.
+# It may be that the min config fixes what broke the bad config
+# and the test will not return a result.
+# Set it to "good" to test only the good config and set it
+# to "bad" to only test the bad config.
+#
+# Example:
+# TEST_START
+# TEST_TYPE = config_bisect
+# CONFIG_BISECT_TYPE = build
+# CONFIG_BISECT = /home/test/config-bad
+# MIN_CONFIG = /home/test/config-min
+# BISECT_MANUAL = 1
+#
+#
+#
+# For TEST_TYPE = make_min_config
+#
+# After doing a make localyesconfig, your kernel configuration may
+# not be the most useful minimum configuration. Having a true minimum
+# config that you can use against other configs is very useful if
+# someone else has a config that breaks on your code. By only forcing
+# those configurations that are truly required to boot your machine
+# will give you less of a chance that one of your set configurations
+# will make the bug go away. This will give you a better chance to
+# be able to reproduce the reported bug matching the broken config.
+#
+# Note, this does take some time, and may require you to run the
+# test over night, or perhaps over the weekend. But it also allows
+# you to interrupt it, and gives you the current minimum config
+# that was found till that time.
+#
+# Note, this test automatically assumes a BUILD_TYPE of oldconfig
+# and its test type acts like boot.
+# TODO: add a test version that makes the config do more than just
+# boot, like having network access.
+#
+# To save time, the test does not just grab any option and test
+# it. The Kconfig files are examined to determine the dependencies
+# of the configs. If a config is chosen that depends on another
+# config, that config will be checked first. By checking the
+# parents first, we can eliminate whole groups of configs that
+# may have been enabled.
+#
+# For example, if a USB device config is chosen and depends on CONFIG_USB,
+# the CONFIG_USB will be tested before the device. If CONFIG_USB is
+# found not to be needed, it, as well as all configs that depend on
+# it, will be disabled and removed from the current min_config.
+#
+# OUTPUT_MIN_CONFIG is the path and filename of the file that will
+# be created from the MIN_CONFIG. If you interrupt the test, set
+# this file as your new min config, and use it to continue the test.
+# This file does not need to exist on start of test.
+# This file is not created until a config is found that can be removed.
+# If this file exists, you will be prompted if you want to use it
+# as the min_config (overriding MIN_CONFIG) if START_MIN_CONFIG
+# is not defined.
+# (required field)
+#
+# START_MIN_CONFIG is the config to use to start the test with.
+# you can set this as the same OUTPUT_MIN_CONFIG, but if you do
+# the OUTPUT_MIN_CONFIG file must exist.
+# (default MIN_CONFIG)
+#
+# IGNORE_CONFIG is used to specify a config file that has configs that
+# you already know must be set. Configs are written here that have
+# been tested and proved to be required. It is best to define this
+# file if you intend on interrupting the test and running it where
+# it left off. New configs that it finds will be written to this file
+# and will not be tested again in later runs.
+# (optional)
+#
+# MIN_CONFIG_TYPE can be either 'boot' or 'test'. With 'boot' it will
+# test if the created config can just boot the machine. If this is
+# set to 'test', then the TEST option must be defined and the created
+# config will not only boot the target, but also make sure that the
+# config lets the test succeed. This is useful to make sure the final
+# config that is generated allows network activity (ssh).
+# (optional)
+#
+# USE_OUTPUT_MIN_CONFIG set this to 1 if you do not want to be prompted
+# about using the OUTPUT_MIN_CONFIG as the MIN_CONFIG as the starting
+# point. Set it to 0 if you want to always just use the given MIN_CONFIG.
+# If it is not defined, it will prompt you to pick which config
+# to start with (MIN_CONFIG or OUTPUT_MIN_CONFIG).
+#
+# Example:
+#
+# TEST_TYPE = make_min_config
+# OUTPUT_MIN_CONFIG = /path/to/config-new-min
+# START_MIN_CONFIG = /path/to/config-min
+# IGNORE_CONFIG = /path/to/config-tested
+# MIN_CONFIG_TYPE = test
+# TEST = ssh ${USER}@${MACHINE} echo hi
+#
+#
+#
+#
+# For TEST_TYPE = make_warnings_file
+#
+# If you want the build to fail when a new warning is discovered
+# you set the WARNINGS_FILE to point to a file of known warnings.
+#
+# The test "make_warnings_file" will let you create a new warnings
+# file before you run other tests, like patchcheck.
+#
+# What this test does is to run just a build, you still need to
+# specify BUILD_TYPE to tell the test what type of config to use.
+# A BUILD_TYPE of nobuild will fail this test.
+#
+# The test will do the build and scan for all warnings. Any warning
+# it discovers will be saved in the WARNINGS_FILE (required) option.
+#
+# It is recommended (but not necessary) to make sure BUILD_NOCLEAN is
+# off, so that a full build is done (make mrproper is performed).
+# That way, all warnings will be captured.
+#
+# Example:
+#
+# TEST_TYPE = make_warnings_file
+# WARNINGS_FILE = ${OUTPUT_DIR}
+# BUILD_TYPE = useconfig:oldconfig
+# CHECKOUT = v3.8
+# BUILD_NOCLEAN = 0
+#
diff --git a/kernel/tools/testing/selftests/Makefile b/kernel/tools/testing/selftests/Makefile
new file mode 100644
index 000000000..f76830643
--- /dev/null
+++ b/kernel/tools/testing/selftests/Makefile
@@ -0,0 +1,95 @@
+TARGETS = breakpoints
+TARGETS += cpu-hotplug
+TARGETS += efivarfs
+TARGETS += exec
+TARGETS += firmware
+TARGETS += ftrace
+TARGETS += kcmp
+TARGETS += memfd
+TARGETS += memory-hotplug
+TARGETS += mount
+TARGETS += mqueue
+TARGETS += net
+TARGETS += powerpc
+TARGETS += ptrace
+TARGETS += size
+TARGETS += sysctl
+TARGETS += timers
+TARGETS += user
+TARGETS += vm
+TARGETS += x86
+#Please keep the TARGETS list alphabetically sorted
+
+TARGETS_HOTPLUG = cpu-hotplug
+TARGETS_HOTPLUG += memory-hotplug
+
+# Clear LDFLAGS and MAKEFLAGS if called from main
+# Makefile to avoid test build failures when test
+# Makefile doesn't have explicit build rules.
+ifeq (1,$(MAKELEVEL))
+override LDFLAGS =
+override MAKEFLAGS =
+endif
+
+all:
+ for TARGET in $(TARGETS); do \
+ make -C $$TARGET; \
+ done;
+
+run_tests: all
+ for TARGET in $(TARGETS); do \
+ make -C $$TARGET run_tests; \
+ done;
+
+hotplug:
+ for TARGET in $(TARGETS_HOTPLUG); do \
+ make -C $$TARGET; \
+ done;
+
+run_hotplug: hotplug
+ for TARGET in $(TARGETS_HOTPLUG); do \
+ make -C $$TARGET run_full_test; \
+ done;
+
+clean_hotplug:
+ for TARGET in $(TARGETS_HOTPLUG); do \
+ make -C $$TARGET clean; \
+ done;
+
+INSTALL_PATH ?= install
+INSTALL_PATH := $(abspath $(INSTALL_PATH))
+ALL_SCRIPT := $(INSTALL_PATH)/run_kselftest.sh
+
+install:
+ifdef INSTALL_PATH
+ @# Ask all targets to install their files
+ mkdir -p $(INSTALL_PATH)
+ for TARGET in $(TARGETS); do \
+ mkdir -p $(INSTALL_PATH)/$$TARGET ; \
+ make -C $$TARGET INSTALL_PATH=$(INSTALL_PATH)/$$TARGET install; \
+ done;
+
+ @# Ask all targets to emit their test scripts
+ echo "#!/bin/bash" > $(ALL_SCRIPT)
+ echo "cd \$$(dirname \$$0)" >> $(ALL_SCRIPT)
+ echo "ROOT=\$$PWD" >> $(ALL_SCRIPT)
+
+ for TARGET in $(TARGETS); do \
+ echo "echo ; echo Running tests in $$TARGET" >> $(ALL_SCRIPT); \
+ echo "echo ========================================" >> $(ALL_SCRIPT); \
+ echo "cd $$TARGET" >> $(ALL_SCRIPT); \
+ make -s --no-print-directory -C $$TARGET emit_tests >> $(ALL_SCRIPT); \
+ echo "cd \$$ROOT" >> $(ALL_SCRIPT); \
+ done;
+
+ chmod u+x $(ALL_SCRIPT)
+else
+ $(error Error: set INSTALL_PATH to use install)
+endif
+
+clean:
+ for TARGET in $(TARGETS); do \
+ make -C $$TARGET clean; \
+ done;
+
+.PHONY: install
diff --git a/kernel/tools/testing/selftests/breakpoints/Makefile b/kernel/tools/testing/selftests/breakpoints/Makefile
new file mode 100644
index 000000000..182235640
--- /dev/null
+++ b/kernel/tools/testing/selftests/breakpoints/Makefile
@@ -0,0 +1,24 @@
+# Taken from perf makefile
+uname_M := $(shell uname -m 2>/dev/null || echo not)
+ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/)
+ifeq ($(ARCH),i386)
+ ARCH := x86
+endif
+ifeq ($(ARCH),x86_64)
+ ARCH := x86
+endif
+
+
+all:
+ifeq ($(ARCH),x86)
+ gcc breakpoint_test.c -o breakpoint_test
+else
+ echo "Not an x86 target, can't build breakpoints selftests"
+endif
+
+TEST_PROGS := breakpoint_test
+
+include ../lib.mk
+
+clean:
+ rm -fr breakpoint_test
diff --git a/kernel/tools/testing/selftests/breakpoints/breakpoint_test.c b/kernel/tools/testing/selftests/breakpoints/breakpoint_test.c
new file mode 100644
index 000000000..120895ab5
--- /dev/null
+++ b/kernel/tools/testing/selftests/breakpoints/breakpoint_test.c
@@ -0,0 +1,396 @@
+/*
+ * Copyright (C) 2011 Red Hat, Inc., Frederic Weisbecker <fweisbec@redhat.com>
+ *
+ * Licensed under the terms of the GNU GPL License version 2
+ *
+ * Selftests for breakpoints (and more generally the do_debug() path) in x86.
+ */
+
+
+#include <sys/ptrace.h>
+#include <unistd.h>
+#include <stddef.h>
+#include <sys/user.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <signal.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+
+#include "../kselftest.h"
+
+
+/* Breakpoint access modes */
+enum {
+ BP_X = 1,
+ BP_RW = 2,
+ BP_W = 4,
+};
+
+static pid_t child_pid;
+
+/*
+ * Ensures the child and parent are always "talking" about
+ * the same test sequence. (ie: that we haven't forgotten
+ * to call check_trapped() somewhere).
+ */
+static int nr_tests;
+
+static void set_breakpoint_addr(void *addr, int n)
+{
+ int ret;
+
+ ret = ptrace(PTRACE_POKEUSER, child_pid,
+ offsetof(struct user, u_debugreg[n]), addr);
+ if (ret) {
+ perror("Can't set breakpoint addr\n");
+ ksft_exit_fail();
+ }
+}
+
+static void toggle_breakpoint(int n, int type, int len,
+ int local, int global, int set)
+{
+ int ret;
+
+ int xtype, xlen;
+ unsigned long vdr7, dr7;
+
+ switch (type) {
+ case BP_X:
+ xtype = 0;
+ break;
+ case BP_W:
+ xtype = 1;
+ break;
+ case BP_RW:
+ xtype = 3;
+ break;
+ }
+
+ switch (len) {
+ case 1:
+ xlen = 0;
+ break;
+ case 2:
+ xlen = 4;
+ break;
+ case 4:
+ xlen = 0xc;
+ break;
+ case 8:
+ xlen = 8;
+ break;
+ }
+
+ dr7 = ptrace(PTRACE_PEEKUSER, child_pid,
+ offsetof(struct user, u_debugreg[7]), 0);
+
+ vdr7 = (xlen | xtype) << 16;
+ vdr7 <<= 4 * n;
+
+ if (local) {
+ vdr7 |= 1 << (2 * n);
+ vdr7 |= 1 << 8;
+ }
+ if (global) {
+ vdr7 |= 2 << (2 * n);
+ vdr7 |= 1 << 9;
+ }
+
+ if (set)
+ dr7 |= vdr7;
+ else
+ dr7 &= ~vdr7;
+
+ ret = ptrace(PTRACE_POKEUSER, child_pid,
+ offsetof(struct user, u_debugreg[7]), dr7);
+ if (ret) {
+ perror("Can't set dr7");
+ ksft_exit_fail();
+ }
+}
+
+/* Dummy variables to test read/write accesses */
+static unsigned long long dummy_var[4];
+
+/* Dummy functions to test execution accesses */
+static void dummy_func(void) { }
+static void dummy_func1(void) { }
+static void dummy_func2(void) { }
+static void dummy_func3(void) { }
+
+static void (*dummy_funcs[])(void) = {
+ dummy_func,
+ dummy_func1,
+ dummy_func2,
+ dummy_func3,
+};
+
+static int trapped;
+
+static void check_trapped(void)
+{
+ /*
+ * If we haven't trapped, wake up the parent
+ * so that it notices the failure.
+ */
+ if (!trapped)
+ kill(getpid(), SIGUSR1);
+ trapped = 0;
+
+ nr_tests++;
+}
+
+static void write_var(int len)
+{
+ char *pcval; short *psval; int *pival; long long *plval;
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ switch (len) {
+ case 1:
+ pcval = (char *)&dummy_var[i];
+ *pcval = 0xff;
+ break;
+ case 2:
+ psval = (short *)&dummy_var[i];
+ *psval = 0xffff;
+ break;
+ case 4:
+ pival = (int *)&dummy_var[i];
+ *pival = 0xffffffff;
+ break;
+ case 8:
+ plval = (long long *)&dummy_var[i];
+ *plval = 0xffffffffffffffffLL;
+ break;
+ }
+ check_trapped();
+ }
+}
+
+static void read_var(int len)
+{
+ char cval; short sval; int ival; long long lval;
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ switch (len) {
+ case 1:
+ cval = *(char *)&dummy_var[i];
+ break;
+ case 2:
+ sval = *(short *)&dummy_var[i];
+ break;
+ case 4:
+ ival = *(int *)&dummy_var[i];
+ break;
+ case 8:
+ lval = *(long long *)&dummy_var[i];
+ break;
+ }
+ check_trapped();
+ }
+}
+
+/*
+ * Do the r/w/x accesses to trigger the breakpoints. And run
+ * the usual traps.
+ */
+static void trigger_tests(void)
+{
+ int len, local, global, i;
+ char val;
+ int ret;
+
+ ret = ptrace(PTRACE_TRACEME, 0, NULL, 0);
+ if (ret) {
+ perror("Can't be traced?\n");
+ return;
+ }
+
+ /* Wake up father so that it sets up the first test */
+ kill(getpid(), SIGUSR1);
+
+ /* Test instruction breakpoints */
+ for (local = 0; local < 2; local++) {
+ for (global = 0; global < 2; global++) {
+ if (!local && !global)
+ continue;
+
+ for (i = 0; i < 4; i++) {
+ dummy_funcs[i]();
+ check_trapped();
+ }
+ }
+ }
+
+ /* Test write watchpoints */
+ for (len = 1; len <= sizeof(long); len <<= 1) {
+ for (local = 0; local < 2; local++) {
+ for (global = 0; global < 2; global++) {
+ if (!local && !global)
+ continue;
+ write_var(len);
+ }
+ }
+ }
+
+ /* Test read/write watchpoints (on read accesses) */
+ for (len = 1; len <= sizeof(long); len <<= 1) {
+ for (local = 0; local < 2; local++) {
+ for (global = 0; global < 2; global++) {
+ if (!local && !global)
+ continue;
+ read_var(len);
+ }
+ }
+ }
+
+ /* Icebp trap */
+ asm(".byte 0xf1\n");
+ check_trapped();
+
+ /* Int 3 trap */
+ asm("int $3\n");
+ check_trapped();
+
+ kill(getpid(), SIGUSR1);
+}
+
+static void check_success(const char *msg)
+{
+ const char *msg2;
+ int child_nr_tests;
+ int status;
+
+ /* Wait for the child to SIGTRAP */
+ wait(&status);
+
+ msg2 = "Failed";
+
+ if (WSTOPSIG(status) == SIGTRAP) {
+ child_nr_tests = ptrace(PTRACE_PEEKDATA, child_pid,
+ &nr_tests, 0);
+ if (child_nr_tests == nr_tests)
+ msg2 = "Ok";
+ if (ptrace(PTRACE_POKEDATA, child_pid, &trapped, 1)) {
+ perror("Can't poke\n");
+ ksft_exit_fail();
+ }
+ }
+
+ nr_tests++;
+
+ printf("%s [%s]\n", msg, msg2);
+}
+
+static void launch_instruction_breakpoints(char *buf, int local, int global)
+{
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ set_breakpoint_addr(dummy_funcs[i], i);
+ toggle_breakpoint(i, BP_X, 1, local, global, 1);
+ ptrace(PTRACE_CONT, child_pid, NULL, 0);
+ sprintf(buf, "Test breakpoint %d with local: %d global: %d",
+ i, local, global);
+ check_success(buf);
+ toggle_breakpoint(i, BP_X, 1, local, global, 0);
+ }
+}
+
+static void launch_watchpoints(char *buf, int mode, int len,
+ int local, int global)
+{
+ const char *mode_str;
+ int i;
+
+ if (mode == BP_W)
+ mode_str = "write";
+ else
+ mode_str = "read";
+
+ for (i = 0; i < 4; i++) {
+ set_breakpoint_addr(&dummy_var[i], i);
+ toggle_breakpoint(i, mode, len, local, global, 1);
+ ptrace(PTRACE_CONT, child_pid, NULL, 0);
+ sprintf(buf, "Test %s watchpoint %d with len: %d local: "
+ "%d global: %d", mode_str, i, len, local, global);
+ check_success(buf);
+ toggle_breakpoint(i, mode, len, local, global, 0);
+ }
+}
+
+/* Set the breakpoints and check the child successfully trigger them */
+static void launch_tests(void)
+{
+ char buf[1024];
+ int len, local, global, i;
+
+ /* Instruction breakpoints */
+ for (local = 0; local < 2; local++) {
+ for (global = 0; global < 2; global++) {
+ if (!local && !global)
+ continue;
+ launch_instruction_breakpoints(buf, local, global);
+ }
+ }
+
+ /* Write watchpoint */
+ for (len = 1; len <= sizeof(long); len <<= 1) {
+ for (local = 0; local < 2; local++) {
+ for (global = 0; global < 2; global++) {
+ if (!local && !global)
+ continue;
+ launch_watchpoints(buf, BP_W, len,
+ local, global);
+ }
+ }
+ }
+
+ /* Read-Write watchpoint */
+ for (len = 1; len <= sizeof(long); len <<= 1) {
+ for (local = 0; local < 2; local++) {
+ for (global = 0; global < 2; global++) {
+ if (!local && !global)
+ continue;
+ launch_watchpoints(buf, BP_RW, len,
+ local, global);
+ }
+ }
+ }
+
+ /* Icebp traps */
+ ptrace(PTRACE_CONT, child_pid, NULL, 0);
+ check_success("Test icebp");
+
+ /* Int 3 traps */
+ ptrace(PTRACE_CONT, child_pid, NULL, 0);
+ check_success("Test int 3 trap");
+
+ ptrace(PTRACE_CONT, child_pid, NULL, 0);
+}
+
+int main(int argc, char **argv)
+{
+ pid_t pid;
+ int ret;
+
+ pid = fork();
+ if (!pid) {
+ trigger_tests();
+ return 0;
+ }
+
+ child_pid = pid;
+
+ wait(NULL);
+
+ launch_tests();
+
+ wait(NULL);
+
+ return ksft_exit_pass();
+}
diff --git a/kernel/tools/testing/selftests/cpu-hotplug/Makefile b/kernel/tools/testing/selftests/cpu-hotplug/Makefile
new file mode 100644
index 000000000..fe1f99101
--- /dev/null
+++ b/kernel/tools/testing/selftests/cpu-hotplug/Makefile
@@ -0,0 +1,10 @@
+all:
+
+TEST_PROGS := cpu-on-off-test.sh
+
+include ../lib.mk
+
+run_full_test:
+ @/bin/bash ./cpu-on-off-test.sh -a || echo "cpu-hotplug selftests: [FAIL]"
+
+clean:
diff --git a/kernel/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh b/kernel/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh
new file mode 100755
index 000000000..98b1d6565
--- /dev/null
+++ b/kernel/tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh
@@ -0,0 +1,269 @@
+#!/bin/bash
+
+SYSFS=
+
+prerequisite()
+{
+ msg="skip all tests:"
+
+ if [ $UID != 0 ]; then
+ echo $msg must be run as root >&2
+ exit 0
+ fi
+
+ taskset -p 01 $$
+
+ SYSFS=`mount -t sysfs | head -1 | awk '{ print $3 }'`
+
+ if [ ! -d "$SYSFS" ]; then
+ echo $msg sysfs is not mounted >&2
+ exit 0
+ fi
+
+ if ! ls $SYSFS/devices/system/cpu/cpu* > /dev/null 2>&1; then
+ echo $msg cpu hotplug is not supported >&2
+ exit 0
+ fi
+
+ echo "CPU online/offline summary:"
+ online_cpus=`cat $SYSFS/devices/system/cpu/online`
+ online_max=${online_cpus##*-}
+ echo -e "\t Cpus in online state: $online_cpus"
+
+ offline_cpus=`cat $SYSFS/devices/system/cpu/offline`
+ if [[ "a$offline_cpus" = "a" ]]; then
+ offline_cpus=0
+ else
+ offline_max=${offline_cpus##*-}
+ fi
+ echo -e "\t Cpus in offline state: $offline_cpus"
+}
+
+#
+# list all hot-pluggable CPUs
+#
+hotpluggable_cpus()
+{
+ local state=${1:-.\*}
+
+ for cpu in $SYSFS/devices/system/cpu/cpu*; do
+ if [ -f $cpu/online ] && grep -q $state $cpu/online; then
+ echo ${cpu##/*/cpu}
+ fi
+ done
+}
+
+hotplaggable_offline_cpus()
+{
+ hotpluggable_cpus 0
+}
+
+hotpluggable_online_cpus()
+{
+ hotpluggable_cpus 1
+}
+
+cpu_is_online()
+{
+ grep -q 1 $SYSFS/devices/system/cpu/cpu$1/online
+}
+
+cpu_is_offline()
+{
+ grep -q 0 $SYSFS/devices/system/cpu/cpu$1/online
+}
+
+online_cpu()
+{
+ echo 1 > $SYSFS/devices/system/cpu/cpu$1/online
+}
+
+offline_cpu()
+{
+ echo 0 > $SYSFS/devices/system/cpu/cpu$1/online
+}
+
+online_cpu_expect_success()
+{
+ local cpu=$1
+
+ if ! online_cpu $cpu; then
+ echo $FUNCNAME $cpu: unexpected fail >&2
+ elif ! cpu_is_online $cpu; then
+ echo $FUNCNAME $cpu: unexpected offline >&2
+ fi
+}
+
+online_cpu_expect_fail()
+{
+ local cpu=$1
+
+ if online_cpu $cpu 2> /dev/null; then
+ echo $FUNCNAME $cpu: unexpected success >&2
+ elif ! cpu_is_offline $cpu; then
+ echo $FUNCNAME $cpu: unexpected online >&2
+ fi
+}
+
+offline_cpu_expect_success()
+{
+ local cpu=$1
+
+ if ! offline_cpu $cpu; then
+ echo $FUNCNAME $cpu: unexpected fail >&2
+ elif ! cpu_is_offline $cpu; then
+ echo $FUNCNAME $cpu: unexpected offline >&2
+ fi
+}
+
+offline_cpu_expect_fail()
+{
+ local cpu=$1
+
+ if offline_cpu $cpu 2> /dev/null; then
+ echo $FUNCNAME $cpu: unexpected success >&2
+ elif ! cpu_is_online $cpu; then
+ echo $FUNCNAME $cpu: unexpected offline >&2
+ fi
+}
+
+error=-12
+allcpus=0
+priority=0
+online_cpus=0
+online_max=0
+offline_cpus=0
+offline_max=0
+
+while getopts e:ahp: opt; do
+ case $opt in
+ e)
+ error=$OPTARG
+ ;;
+ a)
+ allcpus=1
+ ;;
+ h)
+ echo "Usage $0 [ -a ] [ -e errno ] [ -p notifier-priority ]"
+ echo -e "\t default offline one cpu"
+ echo -e "\t run with -a option to offline all cpus"
+ exit
+ ;;
+ p)
+ priority=$OPTARG
+ ;;
+ esac
+done
+
+if ! [ "$error" -ge -4095 -a "$error" -lt 0 ]; then
+ echo "error code must be -4095 <= errno < 0" >&2
+ exit 1
+fi
+
+prerequisite
+
+#
+# Safe test (default) - offline and online one cpu
+#
+if [ $allcpus -eq 0 ]; then
+ echo "Limited scope test: one hotplug cpu"
+ echo -e "\t (leaves cpu in the original state):"
+ echo -e "\t online to offline to online: cpu $online_max"
+ offline_cpu_expect_success $online_max
+ online_cpu_expect_success $online_max
+
+ if [[ $offline_cpus -gt 0 ]]; then
+ echo -e "\t offline to online to offline: cpu $offline_max"
+ online_cpu_expect_success $offline_max
+ offline_cpu_expect_success $offline_max
+ fi
+ exit 0
+else
+ echo "Full scope test: all hotplug cpus"
+ echo -e "\t online all offline cpus"
+ echo -e "\t offline all online cpus"
+ echo -e "\t online all offline cpus"
+fi
+
+#
+# Online all hot-pluggable CPUs
+#
+for cpu in `hotplaggable_offline_cpus`; do
+ online_cpu_expect_success $cpu
+done
+
+#
+# Offline all hot-pluggable CPUs
+#
+for cpu in `hotpluggable_online_cpus`; do
+ offline_cpu_expect_success $cpu
+done
+
+#
+# Online all hot-pluggable CPUs again
+#
+for cpu in `hotplaggable_offline_cpus`; do
+ online_cpu_expect_success $cpu
+done
+
+#
+# Test with cpu notifier error injection
+#
+
+DEBUGFS=`mount -t debugfs | head -1 | awk '{ print $3 }'`
+NOTIFIER_ERR_INJECT_DIR=$DEBUGFS/notifier-error-inject/cpu
+
+prerequisite_extra()
+{
+ msg="skip extra tests:"
+
+ /sbin/modprobe -q -r cpu-notifier-error-inject
+ /sbin/modprobe -q cpu-notifier-error-inject priority=$priority
+
+ if [ ! -d "$DEBUGFS" ]; then
+ echo $msg debugfs is not mounted >&2
+ exit 0
+ fi
+
+ if [ ! -d $NOTIFIER_ERR_INJECT_DIR ]; then
+ echo $msg cpu-notifier-error-inject module is not available >&2
+ exit 0
+ fi
+}
+
+prerequisite_extra
+
+#
+# Offline all hot-pluggable CPUs
+#
+echo 0 > $NOTIFIER_ERR_INJECT_DIR/actions/CPU_DOWN_PREPARE/error
+for cpu in `hotpluggable_online_cpus`; do
+ offline_cpu_expect_success $cpu
+done
+
+#
+# Test CPU hot-add error handling (offline => online)
+#
+echo $error > $NOTIFIER_ERR_INJECT_DIR/actions/CPU_UP_PREPARE/error
+for cpu in `hotplaggable_offline_cpus`; do
+ online_cpu_expect_fail $cpu
+done
+
+#
+# Online all hot-pluggable CPUs
+#
+echo 0 > $NOTIFIER_ERR_INJECT_DIR/actions/CPU_UP_PREPARE/error
+for cpu in `hotplaggable_offline_cpus`; do
+ online_cpu_expect_success $cpu
+done
+
+#
+# Test CPU hot-remove error handling (online => offline)
+#
+echo $error > $NOTIFIER_ERR_INJECT_DIR/actions/CPU_DOWN_PREPARE/error
+for cpu in `hotpluggable_online_cpus`; do
+ offline_cpu_expect_fail $cpu
+done
+
+echo 0 > $NOTIFIER_ERR_INJECT_DIR/actions/CPU_DOWN_PREPARE/error
+/sbin/modprobe -q -r cpu-notifier-error-inject
diff --git a/kernel/tools/testing/selftests/efivarfs/Makefile b/kernel/tools/testing/selftests/efivarfs/Makefile
new file mode 100644
index 000000000..736c3ddfc
--- /dev/null
+++ b/kernel/tools/testing/selftests/efivarfs/Makefile
@@ -0,0 +1,13 @@
+CFLAGS = -Wall
+
+test_objs = open-unlink create-read
+
+all: $(test_objs)
+
+TEST_PROGS := efivarfs.sh
+TEST_FILES := $(test_objs)
+
+include ../lib.mk
+
+clean:
+ rm -f $(test_objs)
diff --git a/kernel/tools/testing/selftests/efivarfs/create-read.c b/kernel/tools/testing/selftests/efivarfs/create-read.c
new file mode 100644
index 000000000..7feef1880
--- /dev/null
+++ b/kernel/tools/testing/selftests/efivarfs/create-read.c
@@ -0,0 +1,38 @@
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <string.h>
+
+int main(int argc, char **argv)
+{
+ const char *path;
+ char buf[4];
+ int fd, rc;
+
+ if (argc < 2) {
+ fprintf(stderr, "usage: %s <path>\n", argv[0]);
+ return EXIT_FAILURE;
+ }
+
+ path = argv[1];
+
+ /* create a test variable */
+ fd = open(path, O_RDWR | O_CREAT, 0600);
+ if (fd < 0) {
+ perror("open(O_WRONLY)");
+ return EXIT_FAILURE;
+ }
+
+ rc = read(fd, buf, sizeof(buf));
+ if (rc != 0) {
+ fprintf(stderr, "Reading a new var should return EOF\n");
+ return EXIT_FAILURE;
+ }
+
+ return EXIT_SUCCESS;
+}
diff --git a/kernel/tools/testing/selftests/efivarfs/efivarfs.sh b/kernel/tools/testing/selftests/efivarfs/efivarfs.sh
new file mode 100755
index 000000000..77edcdcc0
--- /dev/null
+++ b/kernel/tools/testing/selftests/efivarfs/efivarfs.sh
@@ -0,0 +1,198 @@
+#!/bin/bash
+
+efivarfs_mount=/sys/firmware/efi/efivars
+test_guid=210be57c-9849-4fc7-a635-e6382d1aec27
+
+check_prereqs()
+{
+ local msg="skip all tests:"
+
+ if [ $UID != 0 ]; then
+ echo $msg must be run as root >&2
+ exit 0
+ fi
+
+ if ! grep -q "^\S\+ $efivarfs_mount efivarfs" /proc/mounts; then
+ echo $msg efivarfs is not mounted on $efivarfs_mount >&2
+ exit 0
+ fi
+}
+
+run_test()
+{
+ local test="$1"
+
+ echo "--------------------"
+ echo "running $test"
+ echo "--------------------"
+
+ if [ "$(type -t $test)" = 'function' ]; then
+ ( $test )
+ else
+ ( ./$test )
+ fi
+
+ if [ $? -ne 0 ]; then
+ echo " [FAIL]"
+ rc=1
+ else
+ echo " [PASS]"
+ fi
+}
+
+test_create()
+{
+ local attrs='\x07\x00\x00\x00'
+ local file=$efivarfs_mount/$FUNCNAME-$test_guid
+
+ printf "$attrs\x00" > $file
+
+ if [ ! -e $file ]; then
+ echo "$file couldn't be created" >&2
+ exit 1
+ fi
+
+ if [ $(stat -c %s $file) -ne 5 ]; then
+ echo "$file has invalid size" >&2
+ exit 1
+ fi
+}
+
+test_create_empty()
+{
+ local file=$efivarfs_mount/$FUNCNAME-$test_guid
+
+ : > $file
+
+ if [ ! -e $file ]; then
+ echo "$file can not be created without writing" >&2
+ exit 1
+ fi
+}
+
+test_create_read()
+{
+ local file=$efivarfs_mount/$FUNCNAME-$test_guid
+ ./create-read $file
+}
+
+test_delete()
+{
+ local attrs='\x07\x00\x00\x00'
+ local file=$efivarfs_mount/$FUNCNAME-$test_guid
+
+ printf "$attrs\x00" > $file
+
+ if [ ! -e $file ]; then
+ echo "$file couldn't be created" >&2
+ exit 1
+ fi
+
+ rm $file
+
+ if [ -e $file ]; then
+ echo "$file couldn't be deleted" >&2
+ exit 1
+ fi
+
+}
+
+# test that we can remove a variable by issuing a write with only
+# attributes specified
+test_zero_size_delete()
+{
+ local attrs='\x07\x00\x00\x00'
+ local file=$efivarfs_mount/$FUNCNAME-$test_guid
+
+ printf "$attrs\x00" > $file
+
+ if [ ! -e $file ]; then
+ echo "$file does not exist" >&2
+ exit 1
+ fi
+
+ printf "$attrs" > $file
+
+ if [ -e $file ]; then
+ echo "$file should have been deleted" >&2
+ exit 1
+ fi
+}
+
+test_open_unlink()
+{
+ local file=$efivarfs_mount/$FUNCNAME-$test_guid
+ ./open-unlink $file
+}
+
+# test that we can create a range of filenames
+test_valid_filenames()
+{
+ local attrs='\x07\x00\x00\x00'
+ local ret=0
+
+ local file_list="abc dump-type0-11-1-1362436005 1234 -"
+ for f in $file_list; do
+ local file=$efivarfs_mount/$f-$test_guid
+
+ printf "$attrs\x00" > $file
+
+ if [ ! -e $file ]; then
+ echo "$file could not be created" >&2
+ ret=1
+ else
+ rm $file
+ fi
+ done
+
+ exit $ret
+}
+
+test_invalid_filenames()
+{
+ local attrs='\x07\x00\x00\x00'
+ local ret=0
+
+ local file_list="
+ -1234-1234-1234-123456789abc
+ foo
+ foo-bar
+ -foo-
+ foo-barbazba-foob-foob-foob-foobarbazfoo
+ foo-------------------------------------
+ -12345678-1234-1234-1234-123456789abc
+ a-12345678=1234-1234-1234-123456789abc
+ a-12345678-1234=1234-1234-123456789abc
+ a-12345678-1234-1234=1234-123456789abc
+ a-12345678-1234-1234-1234=123456789abc
+ 1112345678-1234-1234-1234-123456789abc"
+
+ for f in $file_list; do
+ local file=$efivarfs_mount/$f
+
+ printf "$attrs\x00" 2>/dev/null > $file
+
+ if [ -e $file ]; then
+ echo "Creating $file should have failed" >&2
+ rm $file
+ ret=1
+ fi
+ done
+
+ exit $ret
+}
+
+check_prereqs
+
+rc=0
+
+run_test test_create
+run_test test_create_empty
+run_test test_create_read
+run_test test_delete
+run_test test_zero_size_delete
+run_test test_open_unlink
+run_test test_valid_filenames
+run_test test_invalid_filenames
+
+exit $rc
diff --git a/kernel/tools/testing/selftests/efivarfs/open-unlink.c b/kernel/tools/testing/selftests/efivarfs/open-unlink.c
new file mode 100644
index 000000000..8c0764407
--- /dev/null
+++ b/kernel/tools/testing/selftests/efivarfs/open-unlink.c
@@ -0,0 +1,63 @@
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+
+int main(int argc, char **argv)
+{
+ const char *path;
+ char buf[5];
+ int fd, rc;
+
+ if (argc < 2) {
+ fprintf(stderr, "usage: %s <path>\n", argv[0]);
+ return EXIT_FAILURE;
+ }
+
+ path = argv[1];
+
+ /* attributes: EFI_VARIABLE_NON_VOLATILE |
+ * EFI_VARIABLE_BOOTSERVICE_ACCESS |
+ * EFI_VARIABLE_RUNTIME_ACCESS
+ */
+ *(uint32_t *)buf = 0x7;
+ buf[4] = 0;
+
+ /* create a test variable */
+ fd = open(path, O_WRONLY | O_CREAT);
+ if (fd < 0) {
+ perror("open(O_WRONLY)");
+ return EXIT_FAILURE;
+ }
+
+ rc = write(fd, buf, sizeof(buf));
+ if (rc != sizeof(buf)) {
+ perror("write");
+ return EXIT_FAILURE;
+ }
+
+ close(fd);
+
+ fd = open(path, O_RDONLY);
+ if (fd < 0) {
+ perror("open");
+ return EXIT_FAILURE;
+ }
+
+ if (unlink(path) < 0) {
+ perror("unlink");
+ return EXIT_FAILURE;
+ }
+
+ rc = read(fd, buf, sizeof(buf));
+ if (rc > 0) {
+ fprintf(stderr, "reading from an unlinked variable "
+ "shouldn't be possible\n");
+ return EXIT_FAILURE;
+ }
+
+ return EXIT_SUCCESS;
+}
diff --git a/kernel/tools/testing/selftests/exec/.gitignore b/kernel/tools/testing/selftests/exec/.gitignore
new file mode 100644
index 000000000..64073e050
--- /dev/null
+++ b/kernel/tools/testing/selftests/exec/.gitignore
@@ -0,0 +1,9 @@
+subdir*
+script*
+execveat
+execveat.symlink
+execveat.moved
+execveat.path.ephemeral
+execveat.ephemeral
+execveat.denatured
+xxxxxxxx* \ No newline at end of file
diff --git a/kernel/tools/testing/selftests/exec/Makefile b/kernel/tools/testing/selftests/exec/Makefile
new file mode 100644
index 000000000..4edb7d0da
--- /dev/null
+++ b/kernel/tools/testing/selftests/exec/Makefile
@@ -0,0 +1,28 @@
+CFLAGS = -Wall
+BINARIES = execveat
+DEPS = execveat.symlink execveat.denatured script subdir
+all: $(BINARIES) $(DEPS)
+
+subdir:
+ mkdir -p $@
+script:
+ echo '#!/bin/sh' > $@
+ echo 'exit $$*' >> $@
+ chmod +x $@
+execveat.symlink: execveat
+ ln -s -f $< $@
+execveat.denatured: execveat
+ cp $< $@
+ chmod -x $@
+%: %.c
+ $(CC) $(CFLAGS) -o $@ $^
+
+TEST_PROGS := execveat
+TEST_FILES := $(DEPS)
+
+include ../lib.mk
+
+override EMIT_TESTS := echo "mkdir -p subdir; (./execveat && echo \"selftests: execveat [PASS]\") || echo \"selftests: execveat [FAIL]\""
+
+clean:
+ rm -rf $(BINARIES) $(DEPS) subdir.moved execveat.moved xxxxx*
diff --git a/kernel/tools/testing/selftests/exec/execveat.c b/kernel/tools/testing/selftests/exec/execveat.c
new file mode 100644
index 000000000..8d5d1d2ee
--- /dev/null
+++ b/kernel/tools/testing/selftests/exec/execveat.c
@@ -0,0 +1,412 @@
+/*
+ * Copyright (c) 2014 Google, Inc.
+ *
+ * Licensed under the terms of the GNU GPL License version 2
+ *
+ * Selftests for execveat(2).
+ */
+
+#define _GNU_SOURCE /* to get O_PATH, AT_EMPTY_PATH */
+#include <sys/sendfile.h>
+#include <sys/stat.h>
+#include <sys/syscall.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+static char longpath[2 * PATH_MAX] = "";
+static char *envp[] = { "IN_TEST=yes", NULL, NULL };
+static char *argv[] = { "execveat", "99", NULL };
+
+static int execveat_(int fd, const char *path, char **argv, char **envp,
+ int flags)
+{
+#ifdef __NR_execveat
+ return syscall(__NR_execveat, fd, path, argv, envp, flags);
+#else
+ errno = ENOSYS;
+ return -1;
+#endif
+}
+
+#define check_execveat_fail(fd, path, flags, errno) \
+ _check_execveat_fail(fd, path, flags, errno, #errno)
+static int _check_execveat_fail(int fd, const char *path, int flags,
+ int expected_errno, const char *errno_str)
+{
+ int rc;
+
+ errno = 0;
+ printf("Check failure of execveat(%d, '%s', %d) with %s... ",
+ fd, path?:"(null)", flags, errno_str);
+ rc = execveat_(fd, path, argv, envp, flags);
+
+ if (rc > 0) {
+ printf("[FAIL] (unexpected success from execveat(2))\n");
+ return 1;
+ }
+ if (errno != expected_errno) {
+ printf("[FAIL] (expected errno %d (%s) not %d (%s)\n",
+ expected_errno, strerror(expected_errno),
+ errno, strerror(errno));
+ return 1;
+ }
+ printf("[OK]\n");
+ return 0;
+}
+
+static int check_execveat_invoked_rc(int fd, const char *path, int flags,
+ int expected_rc, int expected_rc2)
+{
+ int status;
+ int rc;
+ pid_t child;
+ int pathlen = path ? strlen(path) : 0;
+
+ if (pathlen > 40)
+ printf("Check success of execveat(%d, '%.20s...%s', %d)... ",
+ fd, path, (path + pathlen - 20), flags);
+ else
+ printf("Check success of execveat(%d, '%s', %d)... ",
+ fd, path?:"(null)", flags);
+ child = fork();
+ if (child < 0) {
+ printf("[FAIL] (fork() failed)\n");
+ return 1;
+ }
+ if (child == 0) {
+ /* Child: do execveat(). */
+ rc = execveat_(fd, path, argv, envp, flags);
+ printf("[FAIL]: execveat() failed, rc=%d errno=%d (%s)\n",
+ rc, errno, strerror(errno));
+ exit(1); /* should not reach here */
+ }
+ /* Parent: wait for & check child's exit status. */
+ rc = waitpid(child, &status, 0);
+ if (rc != child) {
+ printf("[FAIL] (waitpid(%d,...) returned %d)\n", child, rc);
+ return 1;
+ }
+ if (!WIFEXITED(status)) {
+ printf("[FAIL] (child %d did not exit cleanly, status=%08x)\n",
+ child, status);
+ return 1;
+ }
+ if ((WEXITSTATUS(status) != expected_rc) &&
+ (WEXITSTATUS(status) != expected_rc2)) {
+ printf("[FAIL] (child %d exited with %d not %d nor %d)\n",
+ child, WEXITSTATUS(status), expected_rc, expected_rc2);
+ return 1;
+ }
+ printf("[OK]\n");
+ return 0;
+}
+
+static int check_execveat(int fd, const char *path, int flags)
+{
+ return check_execveat_invoked_rc(fd, path, flags, 99, 99);
+}
+
+static char *concat(const char *left, const char *right)
+{
+ char *result = malloc(strlen(left) + strlen(right) + 1);
+
+ strcpy(result, left);
+ strcat(result, right);
+ return result;
+}
+
+static int open_or_die(const char *filename, int flags)
+{
+ int fd = open(filename, flags);
+
+ if (fd < 0) {
+ printf("Failed to open '%s'; "
+ "check prerequisites are available\n", filename);
+ exit(1);
+ }
+ return fd;
+}
+
+static void exe_cp(const char *src, const char *dest)
+{
+ int in_fd = open_or_die(src, O_RDONLY);
+ int out_fd = open(dest, O_RDWR|O_CREAT|O_TRUNC, 0755);
+ struct stat info;
+
+ fstat(in_fd, &info);
+ sendfile(out_fd, in_fd, NULL, info.st_size);
+ close(in_fd);
+ close(out_fd);
+}
+
+#define XX_DIR_LEN 200
+static int check_execveat_pathmax(int dot_dfd, const char *src, int is_script)
+{
+ int fail = 0;
+ int ii, count, len;
+ char longname[XX_DIR_LEN + 1];
+ int fd;
+
+ if (*longpath == '\0') {
+ /* Create a filename close to PATH_MAX in length */
+ memset(longname, 'x', XX_DIR_LEN - 1);
+ longname[XX_DIR_LEN - 1] = '/';
+ longname[XX_DIR_LEN] = '\0';
+ count = (PATH_MAX - 3) / XX_DIR_LEN;
+ for (ii = 0; ii < count; ii++) {
+ strcat(longpath, longname);
+ mkdir(longpath, 0755);
+ }
+ len = (PATH_MAX - 3) - (count * XX_DIR_LEN);
+ if (len <= 0)
+ len = 1;
+ memset(longname, 'y', len);
+ longname[len] = '\0';
+ strcat(longpath, longname);
+ }
+ exe_cp(src, longpath);
+
+ /*
+ * Execute as a pre-opened file descriptor, which works whether this is
+ * a script or not (because the interpreter sees a filename like
+ * "/dev/fd/20").
+ */
+ fd = open(longpath, O_RDONLY);
+ if (fd > 0) {
+ printf("Invoke copy of '%s' via filename of length %zu:\n",
+ src, strlen(longpath));
+ fail += check_execveat(fd, "", AT_EMPTY_PATH);
+ } else {
+ printf("Failed to open length %zu filename, errno=%d (%s)\n",
+ strlen(longpath), errno, strerror(errno));
+ fail++;
+ }
+
+ /*
+ * Execute as a long pathname relative to ".". If this is a script,
+ * the interpreter will launch but fail to open the script because its
+ * name ("/dev/fd/5/xxx....") is bigger than PATH_MAX.
+ *
+ * The failure code is usually 127 (POSIX: "If a command is not found,
+ * the exit status shall be 127."), but some systems give 126 (POSIX:
+ * "If the command name is found, but it is not an executable utility,
+ * the exit status shall be 126."), so allow either.
+ */
+ if (is_script)
+ fail += check_execveat_invoked_rc(dot_dfd, longpath, 0,
+ 127, 126);
+ else
+ fail += check_execveat(dot_dfd, longpath, 0);
+
+ return fail;
+}
+
+static int run_tests(void)
+{
+ int fail = 0;
+ char *fullname = realpath("execveat", NULL);
+ char *fullname_script = realpath("script", NULL);
+ char *fullname_symlink = concat(fullname, ".symlink");
+ int subdir_dfd = open_or_die("subdir", O_DIRECTORY|O_RDONLY);
+ int subdir_dfd_ephemeral = open_or_die("subdir.ephemeral",
+ O_DIRECTORY|O_RDONLY);
+ int dot_dfd = open_or_die(".", O_DIRECTORY|O_RDONLY);
+ int dot_dfd_path = open_or_die(".", O_DIRECTORY|O_RDONLY|O_PATH);
+ int dot_dfd_cloexec = open_or_die(".", O_DIRECTORY|O_RDONLY|O_CLOEXEC);
+ int fd = open_or_die("execveat", O_RDONLY);
+ int fd_path = open_or_die("execveat", O_RDONLY|O_PATH);
+ int fd_symlink = open_or_die("execveat.symlink", O_RDONLY);
+ int fd_denatured = open_or_die("execveat.denatured", O_RDONLY);
+ int fd_denatured_path = open_or_die("execveat.denatured",
+ O_RDONLY|O_PATH);
+ int fd_script = open_or_die("script", O_RDONLY);
+ int fd_ephemeral = open_or_die("execveat.ephemeral", O_RDONLY);
+ int fd_ephemeral_path = open_or_die("execveat.path.ephemeral",
+ O_RDONLY|O_PATH);
+ int fd_script_ephemeral = open_or_die("script.ephemeral", O_RDONLY);
+ int fd_cloexec = open_or_die("execveat", O_RDONLY|O_CLOEXEC);
+ int fd_script_cloexec = open_or_die("script", O_RDONLY|O_CLOEXEC);
+
+ /* Check if we have execveat at all, and bail early if not */
+ errno = 0;
+ execveat_(-1, NULL, NULL, NULL, 0);
+ if (errno == ENOSYS) {
+ printf("[FAIL] ENOSYS calling execveat - no kernel support?\n");
+ return 1;
+ }
+
+ /* Change file position to confirm it doesn't affect anything */
+ lseek(fd, 10, SEEK_SET);
+
+ /* Normal executable file: */
+ /* dfd + path */
+ fail += check_execveat(subdir_dfd, "../execveat", 0);
+ fail += check_execveat(dot_dfd, "execveat", 0);
+ fail += check_execveat(dot_dfd_path, "execveat", 0);
+ /* absolute path */
+ fail += check_execveat(AT_FDCWD, fullname, 0);
+ /* absolute path with nonsense dfd */
+ fail += check_execveat(99, fullname, 0);
+ /* fd + no path */
+ fail += check_execveat(fd, "", AT_EMPTY_PATH);
+ /* O_CLOEXEC fd + no path */
+ fail += check_execveat(fd_cloexec, "", AT_EMPTY_PATH);
+ /* O_PATH fd */
+ fail += check_execveat(fd_path, "", AT_EMPTY_PATH);
+
+ /* Mess with executable file that's already open: */
+ /* fd + no path to a file that's been renamed */
+ rename("execveat.ephemeral", "execveat.moved");
+ fail += check_execveat(fd_ephemeral, "", AT_EMPTY_PATH);
+ /* fd + no path to a file that's been deleted */
+ unlink("execveat.moved"); /* remove the file now fd open */
+ fail += check_execveat(fd_ephemeral, "", AT_EMPTY_PATH);
+
+ /* Mess with executable file that's already open with O_PATH */
+ /* fd + no path to a file that's been deleted */
+ unlink("execveat.path.ephemeral");
+ fail += check_execveat(fd_ephemeral_path, "", AT_EMPTY_PATH);
+
+ /* Invalid argument failures */
+ fail += check_execveat_fail(fd, "", 0, ENOENT);
+ fail += check_execveat_fail(fd, NULL, AT_EMPTY_PATH, EFAULT);
+
+ /* Symlink to executable file: */
+ /* dfd + path */
+ fail += check_execveat(dot_dfd, "execveat.symlink", 0);
+ fail += check_execveat(dot_dfd_path, "execveat.symlink", 0);
+ /* absolute path */
+ fail += check_execveat(AT_FDCWD, fullname_symlink, 0);
+ /* fd + no path, even with AT_SYMLINK_NOFOLLOW (already followed) */
+ fail += check_execveat(fd_symlink, "", AT_EMPTY_PATH);
+ fail += check_execveat(fd_symlink, "",
+ AT_EMPTY_PATH|AT_SYMLINK_NOFOLLOW);
+
+ /* Symlink fails when AT_SYMLINK_NOFOLLOW set: */
+ /* dfd + path */
+ fail += check_execveat_fail(dot_dfd, "execveat.symlink",
+ AT_SYMLINK_NOFOLLOW, ELOOP);
+ fail += check_execveat_fail(dot_dfd_path, "execveat.symlink",
+ AT_SYMLINK_NOFOLLOW, ELOOP);
+ /* absolute path */
+ fail += check_execveat_fail(AT_FDCWD, fullname_symlink,
+ AT_SYMLINK_NOFOLLOW, ELOOP);
+
+ /* Shell script wrapping executable file: */
+ /* dfd + path */
+ fail += check_execveat(subdir_dfd, "../script", 0);
+ fail += check_execveat(dot_dfd, "script", 0);
+ fail += check_execveat(dot_dfd_path, "script", 0);
+ /* absolute path */
+ fail += check_execveat(AT_FDCWD, fullname_script, 0);
+ /* fd + no path */
+ fail += check_execveat(fd_script, "", AT_EMPTY_PATH);
+ fail += check_execveat(fd_script, "",
+ AT_EMPTY_PATH|AT_SYMLINK_NOFOLLOW);
+ /* O_CLOEXEC fd fails for a script (as script file inaccessible) */
+ fail += check_execveat_fail(fd_script_cloexec, "", AT_EMPTY_PATH,
+ ENOENT);
+ fail += check_execveat_fail(dot_dfd_cloexec, "script", 0, ENOENT);
+
+ /* Mess with script file that's already open: */
+ /* fd + no path to a file that's been renamed */
+ rename("script.ephemeral", "script.moved");
+ fail += check_execveat(fd_script_ephemeral, "", AT_EMPTY_PATH);
+ /* fd + no path to a file that's been deleted */
+ unlink("script.moved"); /* remove the file while fd open */
+ fail += check_execveat(fd_script_ephemeral, "", AT_EMPTY_PATH);
+
+ /* Rename a subdirectory in the path: */
+ rename("subdir.ephemeral", "subdir.moved");
+ fail += check_execveat(subdir_dfd_ephemeral, "../script", 0);
+ fail += check_execveat(subdir_dfd_ephemeral, "script", 0);
+ /* Remove the subdir and its contents */
+ unlink("subdir.moved/script");
+ unlink("subdir.moved");
+ /* Shell loads via deleted subdir OK because name starts with .. */
+ fail += check_execveat(subdir_dfd_ephemeral, "../script", 0);
+ fail += check_execveat_fail(subdir_dfd_ephemeral, "script", 0, ENOENT);
+
+ /* Flag values other than AT_SYMLINK_NOFOLLOW => EINVAL */
+ fail += check_execveat_fail(dot_dfd, "execveat", 0xFFFF, EINVAL);
+ /* Invalid path => ENOENT */
+ fail += check_execveat_fail(dot_dfd, "no-such-file", 0, ENOENT);
+ fail += check_execveat_fail(dot_dfd_path, "no-such-file", 0, ENOENT);
+ fail += check_execveat_fail(AT_FDCWD, "no-such-file", 0, ENOENT);
+ /* Attempt to execute directory => EACCES */
+ fail += check_execveat_fail(dot_dfd, "", AT_EMPTY_PATH, EACCES);
+ /* Attempt to execute non-executable => EACCES */
+ fail += check_execveat_fail(dot_dfd, "Makefile", 0, EACCES);
+ fail += check_execveat_fail(fd_denatured, "", AT_EMPTY_PATH, EACCES);
+ fail += check_execveat_fail(fd_denatured_path, "", AT_EMPTY_PATH,
+ EACCES);
+ /* Attempt to execute nonsense FD => EBADF */
+ fail += check_execveat_fail(99, "", AT_EMPTY_PATH, EBADF);
+ fail += check_execveat_fail(99, "execveat", 0, EBADF);
+ /* Attempt to execute relative to non-directory => ENOTDIR */
+ fail += check_execveat_fail(fd, "execveat", 0, ENOTDIR);
+
+ fail += check_execveat_pathmax(dot_dfd, "execveat", 0);
+ fail += check_execveat_pathmax(dot_dfd, "script", 1);
+ return fail;
+}
+
+static void prerequisites(void)
+{
+ int fd;
+ const char *script = "#!/bin/sh\nexit $*\n";
+
+ /* Create ephemeral copies of files */
+ exe_cp("execveat", "execveat.ephemeral");
+ exe_cp("execveat", "execveat.path.ephemeral");
+ exe_cp("script", "script.ephemeral");
+ mkdir("subdir.ephemeral", 0755);
+
+ fd = open("subdir.ephemeral/script", O_RDWR|O_CREAT|O_TRUNC, 0755);
+ write(fd, script, strlen(script));
+ close(fd);
+}
+
+int main(int argc, char **argv)
+{
+ int ii;
+ int rc;
+ const char *verbose = getenv("VERBOSE");
+
+ if (argc >= 2) {
+ /* If we are invoked with an argument, don't run tests. */
+ const char *in_test = getenv("IN_TEST");
+
+ if (verbose) {
+ printf(" invoked with:");
+ for (ii = 0; ii < argc; ii++)
+ printf(" [%d]='%s'", ii, argv[ii]);
+ printf("\n");
+ }
+
+ /* Check expected environment transferred. */
+ if (!in_test || strcmp(in_test, "yes") != 0) {
+ printf("[FAIL] (no IN_TEST=yes in env)\n");
+ return 1;
+ }
+
+ /* Use the final argument as an exit code. */
+ rc = atoi(argv[argc - 1]);
+ fflush(stdout);
+ } else {
+ prerequisites();
+ if (verbose)
+ envp[1] = "VERBOSE=1";
+ rc = run_tests();
+ if (rc > 0)
+ printf("%d tests failed\n", rc);
+ }
+ return rc;
+}
diff --git a/kernel/tools/testing/selftests/firmware/Makefile b/kernel/tools/testing/selftests/firmware/Makefile
new file mode 100644
index 000000000..9bf822348
--- /dev/null
+++ b/kernel/tools/testing/selftests/firmware/Makefile
@@ -0,0 +1,11 @@
+# Makefile for firmware loading selftests
+
+# No binaries, but make sure arg-less "make" doesn't trigger "run_tests"
+all:
+
+TEST_PROGS := fw_filesystem.sh fw_userhelper.sh
+
+include ../lib.mk
+
+# Nothing to clean up.
+clean:
diff --git a/kernel/tools/testing/selftests/firmware/fw_filesystem.sh b/kernel/tools/testing/selftests/firmware/fw_filesystem.sh
new file mode 100755
index 000000000..3fc6c10c2
--- /dev/null
+++ b/kernel/tools/testing/selftests/firmware/fw_filesystem.sh
@@ -0,0 +1,62 @@
+#!/bin/sh
+# This validates that the kernel will load firmware out of its list of
+# firmware locations on disk. Since the user helper does similar work,
+# we reset the custom load directory to a location the user helper doesn't
+# know so we can be sure we're not accidentally testing the user helper.
+set -e
+
+modprobe test_firmware
+
+DIR=/sys/devices/virtual/misc/test_firmware
+
+OLD_TIMEOUT=$(cat /sys/class/firmware/timeout)
+OLD_FWPATH=$(cat /sys/module/firmware_class/parameters/path)
+
+FWPATH=$(mktemp -d)
+FW="$FWPATH/test-firmware.bin"
+
+test_finish()
+{
+ echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout
+ echo -n "$OLD_PATH" >/sys/module/firmware_class/parameters/path
+ rm -f "$FW"
+ rmdir "$FWPATH"
+}
+
+trap "test_finish" EXIT
+
+# Turn down the timeout so failures don't take so long.
+echo 1 >/sys/class/firmware/timeout
+# Set the kernel search path.
+echo -n "$FWPATH" >/sys/module/firmware_class/parameters/path
+
+# This is an unlikely real-world firmware content. :)
+echo "ABCD0123" >"$FW"
+
+NAME=$(basename "$FW")
+
+# Request a firmware that doesn't exist, it should fail.
+echo -n "nope-$NAME" >"$DIR"/trigger_request
+if diff -q "$FW" /dev/test_firmware >/dev/null ; then
+ echo "$0: firmware was not expected to match" >&2
+ exit 1
+else
+ echo "$0: timeout works"
+fi
+
+# This should succeed via kernel load or will fail after 1 second after
+# being handed over to the user helper, which won't find the fw either.
+if ! echo -n "$NAME" >"$DIR"/trigger_request ; then
+ echo "$0: could not trigger request" >&2
+ exit 1
+fi
+
+# Verify the contents are what we expect.
+if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
+ echo "$0: firmware was not loaded" >&2
+ exit 1
+else
+ echo "$0: filesystem loading works"
+fi
+
+exit 0
diff --git a/kernel/tools/testing/selftests/firmware/fw_userhelper.sh b/kernel/tools/testing/selftests/firmware/fw_userhelper.sh
new file mode 100755
index 000000000..6efbade12
--- /dev/null
+++ b/kernel/tools/testing/selftests/firmware/fw_userhelper.sh
@@ -0,0 +1,89 @@
+#!/bin/sh
+# This validates that the kernel will fall back to using the user helper
+# to load firmware it can't find on disk itself. We must request a firmware
+# that the kernel won't find, and any installed helper (e.g. udev) also
+# won't find so that we can do the load ourself manually.
+set -e
+
+modprobe test_firmware
+
+DIR=/sys/devices/virtual/misc/test_firmware
+
+OLD_TIMEOUT=$(cat /sys/class/firmware/timeout)
+
+FWPATH=$(mktemp -d)
+FW="$FWPATH/test-firmware.bin"
+
+test_finish()
+{
+ echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout
+ rm -f "$FW"
+ rmdir "$FWPATH"
+}
+
+load_fw()
+{
+ local name="$1"
+ local file="$2"
+
+ # This will block until our load (below) has finished.
+ echo -n "$name" >"$DIR"/trigger_request &
+
+ # Give kernel a chance to react.
+ local timeout=10
+ while [ ! -e "$DIR"/"$name"/loading ]; do
+ sleep 0.1
+ timeout=$(( $timeout - 1 ))
+ if [ "$timeout" -eq 0 ]; then
+ echo "$0: firmware interface never appeared" >&2
+ exit 1
+ fi
+ done
+
+ echo 1 >"$DIR"/"$name"/loading
+ cat "$file" >"$DIR"/"$name"/data
+ echo 0 >"$DIR"/"$name"/loading
+
+ # Wait for request to finish.
+ wait
+}
+
+trap "test_finish" EXIT
+
+# This is an unlikely real-world firmware content. :)
+echo "ABCD0123" >"$FW"
+NAME=$(basename "$FW")
+
+# Test failure when doing nothing (timeout works).
+echo 1 >/sys/class/firmware/timeout
+echo -n "$NAME" >"$DIR"/trigger_request
+if diff -q "$FW" /dev/test_firmware >/dev/null ; then
+ echo "$0: firmware was not expected to match" >&2
+ exit 1
+else
+ echo "$0: timeout works"
+fi
+
+# Put timeout high enough for us to do work but not so long that failures
+# slow down this test too much.
+echo 4 >/sys/class/firmware/timeout
+
+# Load this script instead of the desired firmware.
+load_fw "$NAME" "$0"
+if diff -q "$FW" /dev/test_firmware >/dev/null ; then
+ echo "$0: firmware was not expected to match" >&2
+ exit 1
+else
+ echo "$0: firmware comparison works"
+fi
+
+# Do a proper load, which should work correctly.
+load_fw "$NAME" "$FW"
+if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
+ echo "$0: firmware was not loaded" >&2
+ exit 1
+else
+ echo "$0: user helper firmware loading works"
+fi
+
+exit 0
diff --git a/kernel/tools/testing/selftests/ftrace/Makefile b/kernel/tools/testing/selftests/ftrace/Makefile
new file mode 100644
index 000000000..346720639
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/Makefile
@@ -0,0 +1,8 @@
+all:
+
+TEST_PROGS := ftracetest
+
+include ../lib.mk
+
+clean:
+ rm -rf logs/*
diff --git a/kernel/tools/testing/selftests/ftrace/README b/kernel/tools/testing/selftests/ftrace/README
new file mode 100644
index 000000000..182e76fa4
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/README
@@ -0,0 +1,82 @@
+Linux Ftrace Testcases
+
+This is a collection of testcases for ftrace tracing feature in the Linux
+kernel. Since ftrace exports interfaces via the debugfs, we just need
+shell scripts for testing. Feel free to add new test cases.
+
+Running the ftrace testcases
+============================
+
+At first, you need to be the root user to run this script.
+To run all testcases:
+
+ $ sudo ./ftracetest
+
+To run specific testcases:
+
+ # ./ftracetest test.d/basic3.tc
+
+Or you can also run testcases under given directory:
+
+ # ./ftracetest test.d/kprobe/
+
+Contributing new testcases
+==========================
+
+Copy test.d/template to your testcase (whose filename must have *.tc
+extension) and rewrite the test description line.
+
+ * The working directory of the script is <debugfs>/tracing/.
+
+ * Take care with side effects as the tests are run with root privilege.
+
+ * The tests should not run for a long period of time (more than 1 min.)
+ These are to be unit tests.
+
+ * You can add a directory for your testcases under test.d/ if needed.
+
+ * The test cases should run on dash (busybox shell) for testing on
+ minimal cross-build environments.
+
+ * Note that the tests are run with "set -e" (errexit) option. If any
+ command fails, the test will be terminated immediately.
+
+ * The tests can return some result codes instead of pass or fail by
+ using exit_unresolved, exit_untested, exit_unsupported and exit_xfail.
+
+Result code
+===========
+
+Ftracetest supports following result codes.
+
+ * PASS: The test succeeded as expected. The test which exits with 0 is
+ counted as passed test.
+
+ * FAIL: The test failed, but was expected to succeed. The test which exits
+ with !0 is counted as failed test.
+
+ * UNRESOLVED: The test produced unclear or intermidiate results.
+ for example, the test was interrupted
+ or the test depends on a previous test, which failed.
+ or the test was set up incorrectly
+ The test which is in above situation, must call exit_unresolved.
+
+ * UNTESTED: The test was not run, currently just a placeholder.
+ In this case, the test must call exit_untested.
+
+ * UNSUPPORTED: The test failed because of lack of feature.
+ In this case, the test must call exit_unsupported.
+
+ * XFAIL: The test failed, and was expected to fail.
+ To return XFAIL, call exit_xfail from the test.
+
+There are some sample test scripts for result code under samples/.
+You can also run samples as below:
+
+ # ./ftracetest samples/
+
+TODO
+====
+
+ * Fancy colored output :)
+
diff --git a/kernel/tools/testing/selftests/ftrace/ftracetest b/kernel/tools/testing/selftests/ftrace/ftracetest
new file mode 100755
index 000000000..da48812ab
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/ftracetest
@@ -0,0 +1,270 @@
+#!/bin/sh
+
+# ftracetest - Ftrace test shell scripts
+#
+# Copyright (C) Hitachi Ltd., 2014
+# Written by Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
+#
+# Released under the terms of the GPL v2.
+
+usage() { # errno [message]
+[ "$2" ] && echo $2
+echo "Usage: ftracetest [options] [testcase(s)] [testcase-directory(s)]"
+echo " Options:"
+echo " -h|--help Show help message"
+echo " -k|--keep Keep passed test logs"
+echo " -v|--verbose Show all stdout messages in testcases"
+echo " -d|--debug Debug mode (trace all shell commands)"
+exit $1
+}
+
+errexit() { # message
+ echo "Error: $1" 1>&2
+ exit 1
+}
+
+# Ensuring user privilege
+if [ `id -u` -ne 0 ]; then
+ errexit "this must be run by root user"
+fi
+
+# Utilities
+absdir() { # file_path
+ (cd `dirname $1`; pwd)
+}
+
+abspath() {
+ echo `absdir $1`/`basename $1`
+}
+
+find_testcases() { #directory
+ echo `find $1 -name \*.tc | sort`
+}
+
+parse_opts() { # opts
+ local OPT_TEST_CASES=
+ local OPT_TEST_DIR=
+
+ while [ "$1" ]; do
+ case "$1" in
+ --help|-h)
+ usage 0
+ ;;
+ --keep|-k)
+ KEEP_LOG=1
+ shift 1
+ ;;
+ --verbose|-v)
+ VERBOSE=1
+ shift 1
+ ;;
+ --debug|-d)
+ DEBUG=1
+ shift 1
+ ;;
+ *.tc)
+ if [ -f "$1" ]; then
+ OPT_TEST_CASES="$OPT_TEST_CASES `abspath $1`"
+ shift 1
+ else
+ usage 1 "$1 is not a testcase"
+ fi
+ ;;
+ *)
+ if [ -d "$1" ]; then
+ OPT_TEST_DIR=`abspath $1`
+ OPT_TEST_CASES="$OPT_TEST_CASES `find_testcases $OPT_TEST_DIR`"
+ shift 1
+ else
+ usage 1 "Invalid option ($1)"
+ fi
+ ;;
+ esac
+ done
+ if [ "$OPT_TEST_CASES" ]; then
+ TEST_CASES=$OPT_TEST_CASES
+ fi
+}
+
+# Parameters
+DEBUGFS_DIR=`grep debugfs /proc/mounts | cut -f2 -d' ' | head -1`
+TRACING_DIR=$DEBUGFS_DIR/tracing
+TOP_DIR=`absdir $0`
+TEST_DIR=$TOP_DIR/test.d
+TEST_CASES=`find_testcases $TEST_DIR`
+LOG_DIR=$TOP_DIR/logs/`date +%Y%m%d-%H%M%S`/
+KEEP_LOG=0
+DEBUG=0
+VERBOSE=0
+# Parse command-line options
+parse_opts $*
+
+[ $DEBUG -ne 0 ] && set -x
+
+# Verify parameters
+if [ -z "$DEBUGFS_DIR" -o ! -d "$TRACING_DIR" ]; then
+ errexit "No ftrace directory found"
+fi
+
+# Preparing logs
+LOG_FILE=$LOG_DIR/ftracetest.log
+mkdir -p $LOG_DIR || errexit "Failed to make a log directory: $LOG_DIR"
+date > $LOG_FILE
+prlog() { # messages
+ echo "$@" | tee -a $LOG_FILE
+}
+catlog() { #file
+ cat $1 | tee -a $LOG_FILE
+}
+prlog "=== Ftrace unit tests ==="
+
+
+# Testcase management
+# Test result codes - Dejagnu extended code
+PASS=0 # The test succeeded.
+FAIL=1 # The test failed, but was expected to succeed.
+UNRESOLVED=2 # The test produced indeterminate results. (e.g. interrupted)
+UNTESTED=3 # The test was not run, currently just a placeholder.
+UNSUPPORTED=4 # The test failed because of lack of feature.
+XFAIL=5 # The test failed, and was expected to fail.
+
+# Accumulations
+PASSED_CASES=
+FAILED_CASES=
+UNRESOLVED_CASES=
+UNTESTED_CASES=
+UNSUPPORTED_CASES=
+XFAILED_CASES=
+UNDEFINED_CASES=
+TOTAL_RESULT=0
+
+CASENO=0
+testcase() { # testfile
+ CASENO=$((CASENO+1))
+ desc=`grep "^#[ \t]*description:" $1 | cut -f2 -d:`
+ prlog -n "[$CASENO]$desc"
+}
+
+eval_result() { # sigval
+ case $1 in
+ $PASS)
+ prlog " [PASS]"
+ PASSED_CASES="$PASSED_CASES $CASENO"
+ return 0
+ ;;
+ $FAIL)
+ prlog " [FAIL]"
+ FAILED_CASES="$FAILED_CASES $CASENO"
+ return 1 # this is a bug.
+ ;;
+ $UNRESOLVED)
+ prlog " [UNRESOLVED]"
+ UNRESOLVED_CASES="$UNRESOLVED_CASES $CASENO"
+ return 1 # this is a kind of bug.. something happened.
+ ;;
+ $UNTESTED)
+ prlog " [UNTESTED]"
+ UNTESTED_CASES="$UNTESTED_CASES $CASENO"
+ return 0
+ ;;
+ $UNSUPPORTED)
+ prlog " [UNSUPPORTED]"
+ UNSUPPORTED_CASES="$UNSUPPORTED_CASES $CASENO"
+ return 1 # this is not a bug, but the result should be reported.
+ ;;
+ $XFAIL)
+ prlog " [XFAIL]"
+ XFAILED_CASES="$XFAILED_CASES $CASENO"
+ return 0
+ ;;
+ *)
+ prlog " [UNDEFINED]"
+ UNDEFINED_CASES="$UNDEFINED_CASES $CASENO"
+ return 1 # this must be a test bug
+ ;;
+ esac
+}
+
+# Signal handling for result codes
+SIG_RESULT=
+SIG_BASE=36 # Use realtime signals
+SIG_PID=$$
+
+SIG_FAIL=$((SIG_BASE + FAIL))
+trap 'SIG_RESULT=$FAIL' $SIG_FAIL
+
+SIG_UNRESOLVED=$((SIG_BASE + UNRESOLVED))
+exit_unresolved () {
+ kill -s $SIG_UNRESOLVED $SIG_PID
+ exit 0
+}
+trap 'SIG_RESULT=$UNRESOLVED' $SIG_UNRESOLVED
+
+SIG_UNTESTED=$((SIG_BASE + UNTESTED))
+exit_untested () {
+ kill -s $SIG_UNTESTED $SIG_PID
+ exit 0
+}
+trap 'SIG_RESULT=$UNTESTED' $SIG_UNTESTED
+
+SIG_UNSUPPORTED=$((SIG_BASE + UNSUPPORTED))
+exit_unsupported () {
+ kill -s $SIG_UNSUPPORTED $SIG_PID
+ exit 0
+}
+trap 'SIG_RESULT=$UNSUPPORTED' $SIG_UNSUPPORTED
+
+SIG_XFAIL=$((SIG_BASE + XFAIL))
+exit_xfail () {
+ kill -s $SIG_XFAIL $SIG_PID
+ exit 0
+}
+trap 'SIG_RESULT=$XFAIL' $SIG_XFAIL
+
+__run_test() { # testfile
+ # setup PID and PPID, $$ is not updated.
+ (cd $TRACING_DIR; read PID _ < /proc/self/stat ; set -e; set -x; . $1)
+ [ $? -ne 0 ] && kill -s $SIG_FAIL $SIG_PID
+}
+
+# Run one test case
+run_test() { # testfile
+ local testname=`basename $1`
+ local testlog=`mktemp $LOG_DIR/${testname}-log.XXXXXX`
+ testcase $1
+ echo "execute: "$1 > $testlog
+ SIG_RESULT=0
+ if [ $VERBOSE -ne 0 ]; then
+ __run_test $1 2>> $testlog | tee -a $testlog
+ else
+ __run_test $1 >> $testlog 2>&1
+ fi
+ eval_result $SIG_RESULT
+ if [ $? -eq 0 ]; then
+ # Remove test log if the test was done as it was expected.
+ [ $KEEP_LOG -eq 0 ] && rm $testlog
+ else
+ catlog $testlog
+ TOTAL_RESULT=1
+ fi
+}
+
+# load in the helper functions
+. $TEST_DIR/functions
+
+# Main loop
+for t in $TEST_CASES; do
+ run_test $t
+done
+
+prlog ""
+prlog "# of passed: " `echo $PASSED_CASES | wc -w`
+prlog "# of failed: " `echo $FAILED_CASES | wc -w`
+prlog "# of unresolved: " `echo $UNRESOLVED_CASES | wc -w`
+prlog "# of untested: " `echo $UNTESTED_CASES | wc -w`
+prlog "# of unsupported: " `echo $UNSUPPORTED_CASES | wc -w`
+prlog "# of xfailed: " `echo $XFAILED_CASES | wc -w`
+prlog "# of undefined(test bug): " `echo $UNDEFINED_CASES | wc -w`
+
+# if no error, return 0
+exit $TOTAL_RESULT
diff --git a/kernel/tools/testing/selftests/ftrace/samples/fail.tc b/kernel/tools/testing/selftests/ftrace/samples/fail.tc
new file mode 100644
index 000000000..15e35b956
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/samples/fail.tc
@@ -0,0 +1,4 @@
+#!/bin/sh
+# description: failure-case example
+cat non-exist-file
+echo "this is not executed"
diff --git a/kernel/tools/testing/selftests/ftrace/samples/pass.tc b/kernel/tools/testing/selftests/ftrace/samples/pass.tc
new file mode 100644
index 000000000..d01549370
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/samples/pass.tc
@@ -0,0 +1,3 @@
+#!/bin/sh
+# description: pass-case example
+return 0
diff --git a/kernel/tools/testing/selftests/ftrace/samples/unresolved.tc b/kernel/tools/testing/selftests/ftrace/samples/unresolved.tc
new file mode 100644
index 000000000..41e99d335
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/samples/unresolved.tc
@@ -0,0 +1,4 @@
+#!/bin/sh
+# description: unresolved-case example
+trap exit_unresolved INT
+kill -INT $PID
diff --git a/kernel/tools/testing/selftests/ftrace/samples/unsupported.tc b/kernel/tools/testing/selftests/ftrace/samples/unsupported.tc
new file mode 100644
index 000000000..45910ff13
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/samples/unsupported.tc
@@ -0,0 +1,3 @@
+#!/bin/sh
+# description: unsupported-case example
+exit_unsupported
diff --git a/kernel/tools/testing/selftests/ftrace/samples/untested.tc b/kernel/tools/testing/selftests/ftrace/samples/untested.tc
new file mode 100644
index 000000000..35a45946e
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/samples/untested.tc
@@ -0,0 +1,3 @@
+#!/bin/sh
+# description: untested-case example
+exit_untested
diff --git a/kernel/tools/testing/selftests/ftrace/samples/xfail.tc b/kernel/tools/testing/selftests/ftrace/samples/xfail.tc
new file mode 100644
index 000000000..9dd395323
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/samples/xfail.tc
@@ -0,0 +1,3 @@
+#!/bin/sh
+# description: xfail-case example
+cat non-exist-file || exit_xfail
diff --git a/kernel/tools/testing/selftests/ftrace/test.d/00basic/basic1.tc b/kernel/tools/testing/selftests/ftrace/test.d/00basic/basic1.tc
new file mode 100644
index 000000000..9980ff14a
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/test.d/00basic/basic1.tc
@@ -0,0 +1,3 @@
+#!/bin/sh
+# description: Basic trace file check
+test -f README -a -f trace -a -f tracing_on -a -f trace_pipe
diff --git a/kernel/tools/testing/selftests/ftrace/test.d/00basic/basic2.tc b/kernel/tools/testing/selftests/ftrace/test.d/00basic/basic2.tc
new file mode 100644
index 000000000..bf9a7b037
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/test.d/00basic/basic2.tc
@@ -0,0 +1,7 @@
+#!/bin/sh
+# description: Basic test for tracers
+test -f available_tracers
+for t in `cat available_tracers`; do
+ echo $t > current_tracer
+done
+echo nop > current_tracer
diff --git a/kernel/tools/testing/selftests/ftrace/test.d/00basic/basic3.tc b/kernel/tools/testing/selftests/ftrace/test.d/00basic/basic3.tc
new file mode 100644
index 000000000..bde6625d9
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/test.d/00basic/basic3.tc
@@ -0,0 +1,8 @@
+#!/bin/sh
+# description: Basic trace clock test
+test -f trace_clock
+for c in `cat trace_clock | tr -d \[\]`; do
+ echo $c > trace_clock
+ grep '\['$c'\]' trace_clock
+done
+echo local > trace_clock
diff --git a/kernel/tools/testing/selftests/ftrace/test.d/00basic/basic4.tc b/kernel/tools/testing/selftests/ftrace/test.d/00basic/basic4.tc
new file mode 100644
index 000000000..aa51f6c17
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/test.d/00basic/basic4.tc
@@ -0,0 +1,5 @@
+#!/bin/sh
+# description: Basic event tracing check
+test -f available_events -a -f set_event -a -d events
+# check scheduler events are available
+grep -q sched available_events && exit 0 || exit $FAIL
diff --git a/kernel/tools/testing/selftests/ftrace/test.d/event/event-enable.tc b/kernel/tools/testing/selftests/ftrace/test.d/event/event-enable.tc
new file mode 100644
index 000000000..87eb9d6dd
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/test.d/event/event-enable.tc
@@ -0,0 +1,60 @@
+#!/bin/sh
+# description: event tracing - enable/disable with event level files
+
+do_reset() {
+ echo > set_event
+ clear_trace
+}
+
+fail() { #msg
+ do_reset
+ echo $1
+ exit $FAIL
+}
+
+yield() {
+ ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1
+}
+
+if [ ! -f set_event -o ! -d events/sched ]; then
+ echo "event tracing is not supported"
+ exit_unsupported
+fi
+
+reset_tracer
+do_reset
+
+echo 'sched:sched_switch' > set_event
+
+yield
+
+count=`cat trace | grep sched_switch | wc -l`
+if [ $count -eq 0 ]; then
+ fail "sched_switch events are not recorded"
+fi
+
+do_reset
+
+echo 1 > events/sched/sched_switch/enable
+
+yield
+
+count=`cat trace | grep sched_switch | wc -l`
+if [ $count -eq 0 ]; then
+ fail "sched_switch events are not recorded"
+fi
+
+do_reset
+
+echo 0 > events/sched/sched_switch/enable
+
+yield
+
+count=`cat trace | grep sched_switch | wc -l`
+if [ $count -ne 0 ]; then
+ fail "sched_switch events should not be recorded"
+fi
+
+do_reset
+
+exit 0
diff --git a/kernel/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc b/kernel/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc
new file mode 100644
index 000000000..ced27ef06
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/test.d/event/subsystem-enable.tc
@@ -0,0 +1,60 @@
+#!/bin/sh
+# description: event tracing - enable/disable with subsystem level files
+
+do_reset() {
+ echo > set_event
+ clear_trace
+}
+
+fail() { #msg
+ do_reset
+ echo $1
+ exit $FAIL
+}
+
+yield() {
+ ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1
+}
+
+if [ ! -f set_event -o ! -d events/sched ]; then
+ echo "event tracing is not supported"
+ exit_unsupported
+fi
+
+reset_tracer
+do_reset
+
+echo 'sched:*' > set_event
+
+yield
+
+count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
+if [ $count -lt 3 ]; then
+ fail "at least fork, exec and exit events should be recorded"
+fi
+
+do_reset
+
+echo 1 > events/sched/enable
+
+yield
+
+count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
+if [ $count -lt 3 ]; then
+ fail "at least fork, exec and exit events should be recorded"
+fi
+
+do_reset
+
+echo 0 > events/sched/enable
+
+yield
+
+count=`cat trace | grep -v ^# | awk '{ print $5 }' | sort -u | wc -l`
+if [ $count -ne 0 ]; then
+ fail "any of scheduler events should not be recorded"
+fi
+
+do_reset
+
+exit 0
diff --git a/kernel/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc b/kernel/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc
new file mode 100644
index 000000000..0bb5df3c0
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/test.d/event/toplevel-enable.tc
@@ -0,0 +1,60 @@
+#!/bin/sh
+# description: event tracing - enable/disable with top level files
+
+do_reset() {
+ echo > set_event
+ clear_trace
+}
+
+fail() { #msg
+ do_reset
+ echo $1
+ exit $FAIL
+}
+
+yield() {
+ ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1
+}
+
+if [ ! -f available_events -o ! -f set_event -o ! -d events ]; then
+ echo "event tracing is not supported"
+ exit_unsupported
+fi
+
+reset_tracer
+do_reset
+
+echo '*:*' > set_event
+
+yield
+
+count=`cat trace | grep -v ^# | wc -l`
+if [ $count -eq 0 ]; then
+ fail "none of events are recorded"
+fi
+
+do_reset
+
+echo 1 > events/enable
+
+yield
+
+count=`cat trace | grep -v ^# | wc -l`
+if [ $count -eq 0 ]; then
+ fail "none of events are recorded"
+fi
+
+do_reset
+
+echo 0 > events/enable
+
+yield
+
+count=`cat trace | grep -v ^# | wc -l`
+if [ $count -ne 0 ]; then
+ fail "any of events should not be recorded"
+fi
+
+do_reset
+
+exit 0
diff --git a/kernel/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc b/kernel/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc
new file mode 100644
index 000000000..15c2dba06
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc
@@ -0,0 +1,91 @@
+#!/bin/sh
+# description: ftrace - function graph filters with stack tracer
+
+# Make sure that function graph filtering works, and is not
+# affected by other tracers enabled (like stack tracer)
+
+if ! grep -q function_graph available_tracers; then
+ echo "no function graph tracer configured"
+ exit_unsupported
+fi
+
+if [ ! -f set_ftrace_filter ]; then
+ echo "set_ftrace_filter not found? Is dynamic ftrace not set?"
+ exit_unsupported
+fi
+
+do_reset() {
+ reset_tracer
+ if [ -e /proc/sys/kernel/stack_tracer_enabled ]; then
+ echo 0 > /proc/sys/kernel/stack_tracer_enabled
+ fi
+ enable_tracing
+ clear_trace
+ echo > set_ftrace_filter
+}
+
+fail() { # msg
+ do_reset
+ echo $1
+ exit $FAIL
+}
+
+disable_tracing
+clear_trace;
+
+# filter something, schedule is always good
+if ! echo "schedule" > set_ftrace_filter; then
+ # test for powerpc 64
+ if ! echo ".schedule" > set_ftrace_filter; then
+ fail "can not enable schedule filter"
+ fi
+fi
+
+echo function_graph > current_tracer
+
+if [ ! -f stack_trace ]; then
+ echo "Stack tracer not configured"
+ do_reset
+ exit_unsupported;
+fi
+
+echo "Now testing with stack tracer"
+
+echo 1 > /proc/sys/kernel/stack_tracer_enabled
+
+disable_tracing
+clear_trace
+enable_tracing
+sleep 1
+
+count=`cat trace | grep '()' | grep -v schedule | wc -l`
+
+if [ $count -ne 0 ]; then
+ fail "Graph filtering not working with stack tracer?"
+fi
+
+# Make sure we did find something
+count=`cat trace | grep 'schedule()' | wc -l`
+if [ $count -eq 0 ]; then
+ fail "No schedule traces found?"
+fi
+
+echo 0 > /proc/sys/kernel/stack_tracer_enabled
+clear_trace
+sleep 1
+
+
+count=`cat trace | grep '()' | grep -v schedule | wc -l`
+
+if [ $count -ne 0 ]; then
+ fail "Graph filtering not working after stack tracer disabled?"
+fi
+
+count=`cat trace | grep 'schedule()' | wc -l`
+if [ $count -eq 0 ]; then
+ fail "No schedule traces found?"
+fi
+
+do_reset
+
+exit 0
diff --git a/kernel/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc b/kernel/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc
new file mode 100644
index 000000000..0ab218961
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/test.d/ftrace/fgraph-filter.tc
@@ -0,0 +1,52 @@
+#!/bin/sh
+# description: ftrace - function graph filters
+
+# Make sure that function graph filtering works
+
+if ! grep -q function_graph available_tracers; then
+ echo "no function graph tracer configured"
+ exit_unsupported
+fi
+
+do_reset() {
+ reset_tracer
+ enable_tracing
+ clear_trace
+}
+
+fail() { # msg
+ do_reset
+ echo $1
+ exit $FAIL
+}
+
+disable_tracing
+clear_trace
+
+# filter something, schedule is always good
+if ! echo "schedule" > set_ftrace_filter; then
+ # test for powerpc 64
+ if ! echo ".schedule" > set_ftrace_filter; then
+ fail "can not enable schedule filter"
+ fi
+fi
+
+echo function_graph > current_tracer
+enable_tracing
+sleep 1
+# search for functions (has "()" on the line), and make sure
+# that only the schedule function was found
+count=`cat trace | grep '()' | grep -v schedule | wc -l`
+if [ $count -ne 0 ]; then
+ fail "Graph filtering not working by itself?"
+fi
+
+# Make sure we did find something
+count=`cat trace | grep 'schedule()' | wc -l`
+if [ $count -eq 0 ]; then
+ fail "No schedule traces found?"
+fi
+
+do_reset
+
+exit 0
diff --git a/kernel/tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc b/kernel/tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc
new file mode 100644
index 000000000..7808336d6
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/test.d/ftrace/func_profiler.tc
@@ -0,0 +1,80 @@
+#!/bin/sh
+# description: ftrace - function profiler with function tracing
+
+# There was a bug after a rewrite of the ftrace infrastructure that
+# caused the function_profiler not to be able to run with the function
+# tracer, because the function_profiler used the function_graph tracer
+# and it was assumed the two could not run simultaneously.
+#
+# There was another related bug where the solution to the first bug
+# broke the way filtering of the function tracer worked.
+#
+# This test triggers those bugs on those kernels.
+#
+# We need function_graph and profiling to to run this test
+if ! grep -q function_graph available_tracers; then
+ echo "no function graph tracer configured"
+ exit_unsupported;
+fi
+
+if [ ! -f set_ftrace_filter ]; then
+ echo "set_ftrace_filter not found? Is dynamic ftrace not set?"
+ exit_unsupported
+fi
+
+if [ ! -f function_profile_enabled ]; then
+ echo "function_profile_enabled not found, function profiling enabled?"
+ exit_unsupported
+fi
+
+fail() { # mesg
+ reset_tracer
+ echo > set_ftrace_filter
+ echo $1
+ exit $FAIL
+}
+
+echo "Testing function tracer with profiler:"
+echo "enable function tracer"
+echo function > current_tracer
+echo "enable profiler"
+echo 1 > function_profile_enabled
+
+sleep 1
+
+echo "Now filter on just schedule"
+echo '*schedule' > set_ftrace_filter
+clear_trace
+
+echo "Now disable function profiler"
+echo 0 > function_profile_enabled
+
+sleep 1
+
+# make sure only schedule functions exist
+
+echo "testing if only schedule is being traced"
+if grep -v -e '^#' -e 'schedule' trace; then
+ fail "more than schedule was found"
+fi
+
+echo "Make sure schedule was traced"
+if ! grep -e 'schedule' trace > /dev/null; then
+ cat trace
+ fail "can not find schedule in trace"
+fi
+
+echo > set_ftrace_filter
+clear_trace
+
+sleep 1
+
+echo "make sure something other than scheduler is being traced"
+if ! grep -v -e '^#' -e 'schedule' trace > /dev/null; then
+ cat trace
+ fail "no other functions besides schedule was found"
+fi
+
+reset_tracer
+
+exit 0
diff --git a/kernel/tools/testing/selftests/ftrace/test.d/functions b/kernel/tools/testing/selftests/ftrace/test.d/functions
new file mode 100644
index 000000000..5d8cd06d9
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/test.d/functions
@@ -0,0 +1,16 @@
+
+clear_trace() { # reset trace output
+ echo > trace
+}
+
+disable_tracing() { # stop trace recording
+ echo 0 > tracing_on
+}
+
+enable_tracing() { # start trace recording
+ echo 1 > tracing_on
+}
+
+reset_tracer() { # reset the current tracer
+ echo nop > current_tracer
+}
diff --git a/kernel/tools/testing/selftests/ftrace/test.d/kprobe/add_and_remove.tc b/kernel/tools/testing/selftests/ftrace/test.d/kprobe/add_and_remove.tc
new file mode 100644
index 000000000..a5a426211
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/test.d/kprobe/add_and_remove.tc
@@ -0,0 +1,12 @@
+#!/bin/sh
+# description: Kprobe dynamic event - adding and removing
+
+[ -f kprobe_events ] || exit_unsupported # this is configurable
+
+echo 0 > events/enable
+echo > kprobe_events
+echo p:myevent do_fork > kprobe_events
+grep myevent kprobe_events
+test -d events/kprobes/myevent
+echo > kprobe_events
+clear_trace
diff --git a/kernel/tools/testing/selftests/ftrace/test.d/kprobe/busy_check.tc b/kernel/tools/testing/selftests/ftrace/test.d/kprobe/busy_check.tc
new file mode 100644
index 000000000..d8c7bb658
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/test.d/kprobe/busy_check.tc
@@ -0,0 +1,14 @@
+#!/bin/sh
+# description: Kprobe dynamic event - busy event check
+
+[ -f kprobe_events ] || exit_unsupported
+
+echo 0 > events/enable
+echo > kprobe_events
+echo p:myevent do_fork > kprobe_events
+test -d events/kprobes/myevent
+echo 1 > events/kprobes/myevent/enable
+echo > kprobe_events && exit 1 # this must fail
+echo 0 > events/kprobes/myevent/enable
+echo > kprobe_events # this must succeed
+clear_trace
diff --git a/kernel/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args.tc b/kernel/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args.tc
new file mode 100644
index 000000000..c45ee2761
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args.tc
@@ -0,0 +1,17 @@
+#!/bin/sh
+# description: Kprobe dynamic event with arguments
+
+[ -f kprobe_events ] || exit_unsupported # this is configurable
+
+echo 0 > events/enable
+echo > kprobe_events
+echo 'p:testprobe do_fork $stack $stack0 +0($stack)' > kprobe_events
+grep testprobe kprobe_events
+test -d events/kprobes/testprobe
+echo 1 > events/kprobes/testprobe/enable
+( echo "forked")
+echo 0 > events/kprobes/testprobe/enable
+echo "-:testprobe" >> kprobe_events
+clear_trace
+test -d events/kprobes/testprobe && exit 1 || exit 0
+
diff --git a/kernel/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_ftrace.tc b/kernel/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_ftrace.tc
new file mode 100644
index 000000000..ab41d2b29
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_ftrace.tc
@@ -0,0 +1,55 @@
+#!/bin/sh
+# description: Kprobe dynamic event with function tracer
+
+[ -f kprobe_events ] || exit_unsupported # this is configurable
+grep function available_tracers || exit_unsupported # this is configurable
+
+# prepare
+echo nop > current_tracer
+echo do_fork > set_ftrace_filter
+echo 0 > events/enable
+echo > kprobe_events
+echo 'p:testprobe do_fork' > kprobe_events
+
+# kprobe on / ftrace off
+echo 1 > events/kprobes/testprobe/enable
+echo > trace
+( echo "forked")
+grep testprobe trace
+! grep 'do_fork <-' trace
+
+# kprobe on / ftrace on
+echo function > current_tracer
+echo > trace
+( echo "forked")
+grep testprobe trace
+grep 'do_fork <-' trace
+
+# kprobe off / ftrace on
+echo 0 > events/kprobes/testprobe/enable
+echo > trace
+( echo "forked")
+! grep testprobe trace
+grep 'do_fork <-' trace
+
+# kprobe on / ftrace on
+echo 1 > events/kprobes/testprobe/enable
+echo function > current_tracer
+echo > trace
+( echo "forked")
+grep testprobe trace
+grep 'do_fork <-' trace
+
+# kprobe on / ftrace off
+echo nop > current_tracer
+echo > trace
+( echo "forked")
+grep testprobe trace
+! grep 'do_fork <-' trace
+
+# cleanup
+echo nop > current_tracer
+echo > set_ftrace_filter
+echo 0 > events/kprobes/testprobe/enable
+echo > kprobe_events
+echo > trace
diff --git a/kernel/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc b/kernel/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc
new file mode 100644
index 000000000..31717985a
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/test.d/kprobe/kretprobe_args.tc
@@ -0,0 +1,16 @@
+#!/bin/sh
+# description: Kretprobe dynamic event with arguments
+
+[ -f kprobe_events ] || exit_unsupported # this is configurable
+
+echo 0 > events/enable
+echo > kprobe_events
+echo 'r:testprobe2 do_fork $retval' > kprobe_events
+grep testprobe2 kprobe_events
+test -d events/kprobes/testprobe2
+echo 1 > events/kprobes/testprobe2/enable
+( echo "forked")
+echo 0 > events/kprobes/testprobe2/enable
+echo '-:testprobe2' >> kprobe_events
+clear_trace
+test -d events/kprobes/testprobe2 && exit 1 || exit 0
diff --git a/kernel/tools/testing/selftests/ftrace/test.d/template b/kernel/tools/testing/selftests/ftrace/test.d/template
new file mode 100644
index 000000000..5448f7aba
--- /dev/null
+++ b/kernel/tools/testing/selftests/ftrace/test.d/template
@@ -0,0 +1,9 @@
+#!/bin/sh
+# description: %HERE DESCRIBE WHAT THIS DOES%
+# you have to add ".tc" extention for your testcase file
+# Note that all tests are run with "errexit" option.
+
+exit 0 # Return 0 if the test is passed, otherwise return !0
+# If the test could not run because of lack of feature, call exit_unsupported
+# If the test returned unclear results, call exit_unresolved
+# If the test is a dummy, or a placeholder, call exit_untested
diff --git a/kernel/tools/testing/selftests/gen_kselftest_tar.sh b/kernel/tools/testing/selftests/gen_kselftest_tar.sh
new file mode 100755
index 000000000..17d5bd0c0
--- /dev/null
+++ b/kernel/tools/testing/selftests/gen_kselftest_tar.sh
@@ -0,0 +1,55 @@
+#!/bin/bash
+#
+# gen_kselftest_tar
+# Generate kselftest tarball
+# Author: Shuah Khan <shuahkh@osg.samsung.com>
+# Copyright (C) 2015 Samsung Electronics Co., Ltd.
+
+# This software may be freely redistributed under the terms of the GNU
+# General Public License (GPLv2).
+
+# main
+main()
+{
+ if [ "$#" -eq 0 ]; then
+ echo "$0: Generating default compression gzip"
+ copts="cvzf"
+ ext=".tar.gz"
+ else
+ case "$1" in
+ tar)
+ copts="cvf"
+ ext=".tar"
+ ;;
+ targz)
+ copts="cvzf"
+ ext=".tar.gz"
+ ;;
+ tarbz2)
+ copts="cvjf"
+ ext=".tar.bz2"
+ ;;
+ tarxz)
+ copts="cvJf"
+ ext=".tar.xz"
+ ;;
+ *)
+ echo "Unknown tarball format $1"
+ exit 1
+ ;;
+ esac
+ fi
+
+ install_dir=./kselftest
+
+# Run install using INSTALL_KSFT_PATH override to generate install
+# directory
+./kselftest_install.sh
+tar $copts kselftest${ext} $install_dir
+echo "Kselftest archive kselftest${ext} created!"
+
+# clean up install directory
+rm -rf kselftest
+}
+
+main "$@"
diff --git a/kernel/tools/testing/selftests/ipc/Makefile b/kernel/tools/testing/selftests/ipc/Makefile
new file mode 100644
index 000000000..25d2e702c
--- /dev/null
+++ b/kernel/tools/testing/selftests/ipc/Makefile
@@ -0,0 +1,22 @@
+uname_M := $(shell uname -m 2>/dev/null || echo not)
+ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/)
+ifeq ($(ARCH),i386)
+ ARCH := x86
+ CFLAGS := -DCONFIG_X86_32 -D__i386__
+endif
+ifeq ($(ARCH),x86_64)
+ ARCH := x86
+ CFLAGS := -DCONFIG_X86_64 -D__x86_64__
+endif
+
+CFLAGS += -I../../../../usr/include/
+
+all:
+ $(CC) $(CFLAGS) msgque.c -o msgque_test
+
+TEST_PROGS := msgque_test
+
+include ../lib.mk
+
+clean:
+ rm -fr ./msgque_test
diff --git a/kernel/tools/testing/selftests/ipc/msgque.c b/kernel/tools/testing/selftests/ipc/msgque.c
new file mode 100644
index 000000000..1b2ce334b
--- /dev/null
+++ b/kernel/tools/testing/selftests/ipc/msgque.c
@@ -0,0 +1,254 @@
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <linux/msg.h>
+#include <fcntl.h>
+
+#include "../kselftest.h"
+
+#define MAX_MSG_SIZE 32
+
+struct msg1 {
+ int msize;
+ long mtype;
+ char mtext[MAX_MSG_SIZE];
+};
+
+#define TEST_STRING "Test sysv5 msg"
+#define MSG_TYPE 1
+
+#define ANOTHER_TEST_STRING "Yet another test sysv5 msg"
+#define ANOTHER_MSG_TYPE 26538
+
+struct msgque_data {
+ key_t key;
+ int msq_id;
+ int qbytes;
+ int qnum;
+ int mode;
+ struct msg1 *messages;
+};
+
+int restore_queue(struct msgque_data *msgque)
+{
+ int fd, ret, id, i;
+ char buf[32];
+
+ fd = open("/proc/sys/kernel/msg_next_id", O_WRONLY);
+ if (fd == -1) {
+ printf("Failed to open /proc/sys/kernel/msg_next_id\n");
+ return -errno;
+ }
+ sprintf(buf, "%d", msgque->msq_id);
+
+ ret = write(fd, buf, strlen(buf));
+ if (ret != strlen(buf)) {
+ printf("Failed to write to /proc/sys/kernel/msg_next_id\n");
+ return -errno;
+ }
+
+ id = msgget(msgque->key, msgque->mode | IPC_CREAT | IPC_EXCL);
+ if (id == -1) {
+ printf("Failed to create queue\n");
+ return -errno;
+ }
+
+ if (id != msgque->msq_id) {
+ printf("Restored queue has wrong id (%d instead of %d)\n",
+ id, msgque->msq_id);
+ ret = -EFAULT;
+ goto destroy;
+ }
+
+ for (i = 0; i < msgque->qnum; i++) {
+ if (msgsnd(msgque->msq_id, &msgque->messages[i].mtype,
+ msgque->messages[i].msize, IPC_NOWAIT) != 0) {
+ printf("msgsnd failed (%m)\n");
+ ret = -errno;
+ goto destroy;
+ };
+ }
+ return 0;
+
+destroy:
+ if (msgctl(id, IPC_RMID, 0))
+ printf("Failed to destroy queue: %d\n", -errno);
+ return ret;
+}
+
+int check_and_destroy_queue(struct msgque_data *msgque)
+{
+ struct msg1 message;
+ int cnt = 0, ret;
+
+ while (1) {
+ ret = msgrcv(msgque->msq_id, &message.mtype, MAX_MSG_SIZE,
+ 0, IPC_NOWAIT);
+ if (ret < 0) {
+ if (errno == ENOMSG)
+ break;
+ printf("Failed to read IPC message: %m\n");
+ ret = -errno;
+ goto err;
+ }
+ if (ret != msgque->messages[cnt].msize) {
+ printf("Wrong message size: %d (expected %d)\n", ret,
+ msgque->messages[cnt].msize);
+ ret = -EINVAL;
+ goto err;
+ }
+ if (message.mtype != msgque->messages[cnt].mtype) {
+ printf("Wrong message type\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ if (memcmp(message.mtext, msgque->messages[cnt].mtext, ret)) {
+ printf("Wrong message content\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ cnt++;
+ }
+
+ if (cnt != msgque->qnum) {
+ printf("Wrong message number\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ ret = 0;
+err:
+ if (msgctl(msgque->msq_id, IPC_RMID, 0)) {
+ printf("Failed to destroy queue: %d\n", -errno);
+ return -errno;
+ }
+ return ret;
+}
+
+int dump_queue(struct msgque_data *msgque)
+{
+ struct msqid64_ds ds;
+ int kern_id;
+ int i, ret;
+
+ for (kern_id = 0; kern_id < 256; kern_id++) {
+ ret = msgctl(kern_id, MSG_STAT, &ds);
+ if (ret < 0) {
+ if (errno == -EINVAL)
+ continue;
+ printf("Failed to get stats for IPC queue with id %d\n",
+ kern_id);
+ return -errno;
+ }
+
+ if (ret == msgque->msq_id)
+ break;
+ }
+
+ msgque->messages = malloc(sizeof(struct msg1) * ds.msg_qnum);
+ if (msgque->messages == NULL) {
+ printf("Failed to get stats for IPC queue\n");
+ return -ENOMEM;
+ }
+
+ msgque->qnum = ds.msg_qnum;
+ msgque->mode = ds.msg_perm.mode;
+ msgque->qbytes = ds.msg_qbytes;
+
+ for (i = 0; i < msgque->qnum; i++) {
+ ret = msgrcv(msgque->msq_id, &msgque->messages[i].mtype,
+ MAX_MSG_SIZE, i, IPC_NOWAIT | MSG_COPY);
+ if (ret < 0) {
+ printf("Failed to copy IPC message: %m (%d)\n", errno);
+ return -errno;
+ }
+ msgque->messages[i].msize = ret;
+ }
+ return 0;
+}
+
+int fill_msgque(struct msgque_data *msgque)
+{
+ struct msg1 msgbuf;
+
+ msgbuf.mtype = MSG_TYPE;
+ memcpy(msgbuf.mtext, TEST_STRING, sizeof(TEST_STRING));
+ if (msgsnd(msgque->msq_id, &msgbuf.mtype, sizeof(TEST_STRING),
+ IPC_NOWAIT) != 0) {
+ printf("First message send failed (%m)\n");
+ return -errno;
+ };
+
+ msgbuf.mtype = ANOTHER_MSG_TYPE;
+ memcpy(msgbuf.mtext, ANOTHER_TEST_STRING, sizeof(ANOTHER_TEST_STRING));
+ if (msgsnd(msgque->msq_id, &msgbuf.mtype, sizeof(ANOTHER_TEST_STRING),
+ IPC_NOWAIT) != 0) {
+ printf("Second message send failed (%m)\n");
+ return -errno;
+ };
+ return 0;
+}
+
+int main(int argc, char **argv)
+{
+ int msg, pid, err;
+ struct msgque_data msgque;
+
+ if (getuid() != 0) {
+ printf("Please run the test as root - Exiting.\n");
+ return ksft_exit_fail();
+ }
+
+ msgque.key = ftok(argv[0], 822155650);
+ if (msgque.key == -1) {
+ printf("Can't make key: %d\n", -errno);
+ return ksft_exit_fail();
+ }
+
+ msgque.msq_id = msgget(msgque.key, IPC_CREAT | IPC_EXCL | 0666);
+ if (msgque.msq_id == -1) {
+ err = -errno;
+ printf("Can't create queue: %d\n", err);
+ goto err_out;
+ }
+
+ err = fill_msgque(&msgque);
+ if (err) {
+ printf("Failed to fill queue: %d\n", err);
+ goto err_destroy;
+ }
+
+ err = dump_queue(&msgque);
+ if (err) {
+ printf("Failed to dump queue: %d\n", err);
+ goto err_destroy;
+ }
+
+ err = check_and_destroy_queue(&msgque);
+ if (err) {
+ printf("Failed to check and destroy queue: %d\n", err);
+ goto err_out;
+ }
+
+ err = restore_queue(&msgque);
+ if (err) {
+ printf("Failed to restore queue: %d\n", err);
+ goto err_destroy;
+ }
+
+ err = check_and_destroy_queue(&msgque);
+ if (err) {
+ printf("Failed to test queue: %d\n", err);
+ goto err_out;
+ }
+ return ksft_exit_pass();
+
+err_destroy:
+ if (msgctl(msgque.msq_id, IPC_RMID, 0)) {
+ printf("Failed to destroy queue: %d\n", -errno);
+ return ksft_exit_fail();
+ }
+err_out:
+ return ksft_exit_fail();
+}
diff --git a/kernel/tools/testing/selftests/kcmp/.gitignore b/kernel/tools/testing/selftests/kcmp/.gitignore
new file mode 100644
index 000000000..5a9b3732b
--- /dev/null
+++ b/kernel/tools/testing/selftests/kcmp/.gitignore
@@ -0,0 +1,2 @@
+kcmp_test
+kcmp-test-file
diff --git a/kernel/tools/testing/selftests/kcmp/Makefile b/kernel/tools/testing/selftests/kcmp/Makefile
new file mode 100644
index 000000000..2ae7450a9
--- /dev/null
+++ b/kernel/tools/testing/selftests/kcmp/Makefile
@@ -0,0 +1,10 @@
+CFLAGS += -I../../../../usr/include/
+
+all: kcmp_test
+
+TEST_PROGS := kcmp_test
+
+include ../lib.mk
+
+clean:
+ $(RM) kcmp_test kcmp-test-file
diff --git a/kernel/tools/testing/selftests/kcmp/kcmp_test.c b/kernel/tools/testing/selftests/kcmp/kcmp_test.c
new file mode 100644
index 000000000..a5a4da856
--- /dev/null
+++ b/kernel/tools/testing/selftests/kcmp/kcmp_test.c
@@ -0,0 +1,109 @@
+#define _GNU_SOURCE
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <signal.h>
+#include <limits.h>
+#include <unistd.h>
+#include <errno.h>
+#include <string.h>
+#include <fcntl.h>
+
+#include <linux/unistd.h>
+#include <linux/kcmp.h>
+
+#include <sys/syscall.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/wait.h>
+
+#include "../kselftest.h"
+
+static long sys_kcmp(int pid1, int pid2, int type, int fd1, int fd2)
+{
+ return syscall(__NR_kcmp, pid1, pid2, type, fd1, fd2);
+}
+
+int main(int argc, char **argv)
+{
+ const char kpath[] = "kcmp-test-file";
+ int pid1, pid2;
+ int fd1, fd2;
+ int status;
+
+ fd1 = open(kpath, O_RDWR | O_CREAT | O_TRUNC, 0644);
+ pid1 = getpid();
+
+ if (fd1 < 0) {
+ perror("Can't create file");
+ ksft_exit_fail();
+ }
+
+ pid2 = fork();
+ if (pid2 < 0) {
+ perror("fork failed");
+ ksft_exit_fail();
+ }
+
+ if (!pid2) {
+ int pid2 = getpid();
+ int ret;
+
+ fd2 = open(kpath, O_RDWR, 0644);
+ if (fd2 < 0) {
+ perror("Can't open file");
+ ksft_exit_fail();
+ }
+
+ /* An example of output and arguments */
+ printf("pid1: %6d pid2: %6d FD: %2ld FILES: %2ld VM: %2ld "
+ "FS: %2ld SIGHAND: %2ld IO: %2ld SYSVSEM: %2ld "
+ "INV: %2ld\n",
+ pid1, pid2,
+ sys_kcmp(pid1, pid2, KCMP_FILE, fd1, fd2),
+ sys_kcmp(pid1, pid2, KCMP_FILES, 0, 0),
+ sys_kcmp(pid1, pid2, KCMP_VM, 0, 0),
+ sys_kcmp(pid1, pid2, KCMP_FS, 0, 0),
+ sys_kcmp(pid1, pid2, KCMP_SIGHAND, 0, 0),
+ sys_kcmp(pid1, pid2, KCMP_IO, 0, 0),
+ sys_kcmp(pid1, pid2, KCMP_SYSVSEM, 0, 0),
+
+ /* This one should fail */
+ sys_kcmp(pid1, pid2, KCMP_TYPES + 1, 0, 0));
+
+ /* This one should return same fd */
+ ret = sys_kcmp(pid1, pid2, KCMP_FILE, fd1, fd1);
+ if (ret) {
+ printf("FAIL: 0 expected but %d returned (%s)\n",
+ ret, strerror(errno));
+ ksft_inc_fail_cnt();
+ ret = -1;
+ } else {
+ printf("PASS: 0 returned as expected\n");
+ ksft_inc_pass_cnt();
+ }
+
+ /* Compare with self */
+ ret = sys_kcmp(pid1, pid1, KCMP_VM, 0, 0);
+ if (ret) {
+ printf("FAIL: 0 expected but %d returned (%s)\n",
+ ret, strerror(errno));
+ ksft_inc_fail_cnt();
+ ret = -1;
+ } else {
+ printf("PASS: 0 returned as expected\n");
+ ksft_inc_pass_cnt();
+ }
+
+ ksft_print_cnts();
+
+ if (ret)
+ ksft_exit_fail();
+ else
+ ksft_exit_pass();
+ }
+
+ waitpid(pid2, &status, P_ALL);
+
+ return ksft_exit_pass();
+}
diff --git a/kernel/tools/testing/selftests/kselftest.h b/kernel/tools/testing/selftests/kselftest.h
new file mode 100644
index 000000000..572c88881
--- /dev/null
+++ b/kernel/tools/testing/selftests/kselftest.h
@@ -0,0 +1,62 @@
+/*
+ * kselftest.h: kselftest framework return codes to include from
+ * selftests.
+ *
+ * Copyright (c) 2014 Shuah Khan <shuahkh@osg.samsung.com>
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * This file is released under the GPLv2.
+ */
+#ifndef __KSELFTEST_H
+#define __KSELFTEST_H
+
+#include <stdlib.h>
+#include <unistd.h>
+
+/* counters */
+struct ksft_count {
+ unsigned int ksft_pass;
+ unsigned int ksft_fail;
+ unsigned int ksft_xfail;
+ unsigned int ksft_xpass;
+ unsigned int ksft_xskip;
+};
+
+static struct ksft_count ksft_cnt;
+
+static inline void ksft_inc_pass_cnt(void) { ksft_cnt.ksft_pass++; }
+static inline void ksft_inc_fail_cnt(void) { ksft_cnt.ksft_fail++; }
+static inline void ksft_inc_xfail_cnt(void) { ksft_cnt.ksft_xfail++; }
+static inline void ksft_inc_xpass_cnt(void) { ksft_cnt.ksft_xpass++; }
+static inline void ksft_inc_xskip_cnt(void) { ksft_cnt.ksft_xskip++; }
+
+static inline void ksft_print_cnts(void)
+{
+ printf("Pass: %d Fail: %d Xfail: %d Xpass: %d, Xskip: %d\n",
+ ksft_cnt.ksft_pass, ksft_cnt.ksft_fail,
+ ksft_cnt.ksft_xfail, ksft_cnt.ksft_xpass,
+ ksft_cnt.ksft_xskip);
+}
+
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+static inline int ksft_exit_xfail(void)
+{
+ exit(2);
+}
+static inline int ksft_exit_xpass(void)
+{
+ exit(3);
+}
+static inline int ksft_exit_skip(void)
+{
+ exit(4);
+}
+
+#endif /* __KSELFTEST_H */
diff --git a/kernel/tools/testing/selftests/kselftest_install.sh b/kernel/tools/testing/selftests/kselftest_install.sh
new file mode 100755
index 000000000..1555fbdb0
--- /dev/null
+++ b/kernel/tools/testing/selftests/kselftest_install.sh
@@ -0,0 +1,37 @@
+#!/bin/bash
+#
+# Kselftest Install
+# Install kselftest tests
+# Author: Shuah Khan <shuahkh@osg.samsung.com>
+# Copyright (C) 2015 Samsung Electronics Co., Ltd.
+
+# This software may be freely redistributed under the terms of the GNU
+# General Public License (GPLv2).
+
+install_loc=`pwd`
+
+main()
+{
+ if [ $(basename $install_loc) != "selftests" ]; then
+ echo "$0: Please run it in selftests directory ..."
+ exit 1;
+ fi
+ if [ "$#" -eq 0 ]; then
+ echo "$0: Installing in default location - $install_loc ..."
+ elif [ ! -d "$1" ]; then
+ echo "$0: $1 doesn't exist!!"
+ exit 1;
+ else
+ install_loc=$1
+ echo "$0: Installing in specified location - $install_loc ..."
+ fi
+
+ install_dir=$install_loc/kselftest
+
+# Create install directory
+ mkdir -p $install_dir
+# Build tests
+ INSTALL_PATH=$install_dir make install
+}
+
+main "$@"
diff --git a/kernel/tools/testing/selftests/lib.mk b/kernel/tools/testing/selftests/lib.mk
new file mode 100644
index 000000000..2194155ae
--- /dev/null
+++ b/kernel/tools/testing/selftests/lib.mk
@@ -0,0 +1,35 @@
+# This mimics the top-level Makefile. We do it explicitly here so that this
+# Makefile can operate with or without the kbuild infrastructure.
+CC := $(CROSS_COMPILE)gcc
+
+define RUN_TESTS
+ @for TEST in $(TEST_PROGS); do \
+ (./$$TEST && echo "selftests: $$TEST [PASS]") || echo "selftests: $$TEST [FAIL]"; \
+ done;
+endef
+
+run_tests: all
+ $(RUN_TESTS)
+
+define INSTALL_RULE
+ mkdir -p $(INSTALL_PATH)
+ install -t $(INSTALL_PATH) $(TEST_PROGS) $(TEST_PROGS_EXTENDED) $(TEST_FILES)
+endef
+
+install: all
+ifdef INSTALL_PATH
+ $(INSTALL_RULE)
+else
+ $(error Error: set INSTALL_PATH to use install)
+endif
+
+define EMIT_TESTS
+ @for TEST in $(TEST_PROGS); do \
+ echo "(./$$TEST && echo \"selftests: $$TEST [PASS]\") || echo \"selftests: $$TEST [FAIL]\""; \
+ done;
+endef
+
+emit_tests:
+ $(EMIT_TESTS)
+
+.PHONY: run_tests all clean install emit_tests
diff --git a/kernel/tools/testing/selftests/memfd/.gitignore b/kernel/tools/testing/selftests/memfd/.gitignore
new file mode 100644
index 000000000..afe87c40a
--- /dev/null
+++ b/kernel/tools/testing/selftests/memfd/.gitignore
@@ -0,0 +1,4 @@
+fuse_mnt
+fuse_test
+memfd_test
+memfd-test-file
diff --git a/kernel/tools/testing/selftests/memfd/Makefile b/kernel/tools/testing/selftests/memfd/Makefile
new file mode 100644
index 000000000..3e7eb7972
--- /dev/null
+++ b/kernel/tools/testing/selftests/memfd/Makefile
@@ -0,0 +1,22 @@
+CC = $(CROSS_COMPILE)gcc
+CFLAGS += -D_FILE_OFFSET_BITS=64
+CFLAGS += -I../../../../include/uapi/
+CFLAGS += -I../../../../include/
+CFLAGS += -I../../../../usr/include/
+
+all:
+ $(CC) $(CFLAGS) memfd_test.c -o memfd_test
+
+TEST_PROGS := memfd_test
+
+include ../lib.mk
+
+build_fuse:
+ $(CC) $(CFLAGS) fuse_mnt.c `pkg-config fuse --cflags --libs` -o fuse_mnt
+ $(CC) $(CFLAGS) fuse_test.c -o fuse_test
+
+run_fuse: build_fuse
+ @./run_fuse_test.sh || echo "fuse_test: [FAIL]"
+
+clean:
+ $(RM) memfd_test fuse_test
diff --git a/kernel/tools/testing/selftests/memfd/fuse_mnt.c b/kernel/tools/testing/selftests/memfd/fuse_mnt.c
new file mode 100644
index 000000000..feacf1280
--- /dev/null
+++ b/kernel/tools/testing/selftests/memfd/fuse_mnt.c
@@ -0,0 +1,110 @@
+/*
+ * memfd test file-system
+ * This file uses FUSE to create a dummy file-system with only one file /memfd.
+ * This file is read-only and takes 1s per read.
+ *
+ * This file-system is used by the memfd test-cases to force the kernel to pin
+ * pages during reads(). Due to the 1s delay of this file-system, this is a
+ * nice way to test race-conditions against get_user_pages() in the kernel.
+ *
+ * We use direct_io==1 to force the kernel to use direct-IO for this
+ * file-system.
+ */
+
+#define FUSE_USE_VERSION 26
+
+#include <fuse.h>
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <unistd.h>
+
+static const char memfd_content[] = "memfd-example-content";
+static const char memfd_path[] = "/memfd";
+
+static int memfd_getattr(const char *path, struct stat *st)
+{
+ memset(st, 0, sizeof(*st));
+
+ if (!strcmp(path, "/")) {
+ st->st_mode = S_IFDIR | 0755;
+ st->st_nlink = 2;
+ } else if (!strcmp(path, memfd_path)) {
+ st->st_mode = S_IFREG | 0444;
+ st->st_nlink = 1;
+ st->st_size = strlen(memfd_content);
+ } else {
+ return -ENOENT;
+ }
+
+ return 0;
+}
+
+static int memfd_readdir(const char *path,
+ void *buf,
+ fuse_fill_dir_t filler,
+ off_t offset,
+ struct fuse_file_info *fi)
+{
+ if (strcmp(path, "/"))
+ return -ENOENT;
+
+ filler(buf, ".", NULL, 0);
+ filler(buf, "..", NULL, 0);
+ filler(buf, memfd_path + 1, NULL, 0);
+
+ return 0;
+}
+
+static int memfd_open(const char *path, struct fuse_file_info *fi)
+{
+ if (strcmp(path, memfd_path))
+ return -ENOENT;
+
+ if ((fi->flags & 3) != O_RDONLY)
+ return -EACCES;
+
+ /* force direct-IO */
+ fi->direct_io = 1;
+
+ return 0;
+}
+
+static int memfd_read(const char *path,
+ char *buf,
+ size_t size,
+ off_t offset,
+ struct fuse_file_info *fi)
+{
+ size_t len;
+
+ if (strcmp(path, memfd_path) != 0)
+ return -ENOENT;
+
+ sleep(1);
+
+ len = strlen(memfd_content);
+ if (offset < len) {
+ if (offset + size > len)
+ size = len - offset;
+
+ memcpy(buf, memfd_content + offset, size);
+ } else {
+ size = 0;
+ }
+
+ return size;
+}
+
+static struct fuse_operations memfd_ops = {
+ .getattr = memfd_getattr,
+ .readdir = memfd_readdir,
+ .open = memfd_open,
+ .read = memfd_read,
+};
+
+int main(int argc, char *argv[])
+{
+ return fuse_main(argc, argv, &memfd_ops, NULL);
+}
diff --git a/kernel/tools/testing/selftests/memfd/fuse_test.c b/kernel/tools/testing/selftests/memfd/fuse_test.c
new file mode 100644
index 000000000..67908b18f
--- /dev/null
+++ b/kernel/tools/testing/selftests/memfd/fuse_test.c
@@ -0,0 +1,311 @@
+/*
+ * memfd GUP test-case
+ * This tests memfd interactions with get_user_pages(). We require the
+ * fuse_mnt.c program to provide a fake direct-IO FUSE mount-point for us. This
+ * file-system delays _all_ reads by 1s and forces direct-IO. This means, any
+ * read() on files in that file-system will pin the receive-buffer pages for at
+ * least 1s via get_user_pages().
+ *
+ * We use this trick to race ADD_SEALS against a write on a memfd object. The
+ * ADD_SEALS must fail if the memfd pages are still pinned. Note that we use
+ * the read() syscall with our memory-mapped memfd object as receive buffer to
+ * force the kernel to write into our memfd object.
+ */
+
+#define _GNU_SOURCE
+#define __EXPORTED_HEADERS__
+
+#include <errno.h>
+#include <inttypes.h>
+#include <limits.h>
+#include <linux/falloc.h>
+#include <linux/fcntl.h>
+#include <linux/memfd.h>
+#include <sched.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <signal.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <sys/syscall.h>
+#include <sys/wait.h>
+#include <unistd.h>
+
+#define MFD_DEF_SIZE 8192
+#define STACK_SIZE 65535
+
+static int sys_memfd_create(const char *name,
+ unsigned int flags)
+{
+ return syscall(__NR_memfd_create, name, flags);
+}
+
+static int mfd_assert_new(const char *name, loff_t sz, unsigned int flags)
+{
+ int r, fd;
+
+ fd = sys_memfd_create(name, flags);
+ if (fd < 0) {
+ printf("memfd_create(\"%s\", %u) failed: %m\n",
+ name, flags);
+ abort();
+ }
+
+ r = ftruncate(fd, sz);
+ if (r < 0) {
+ printf("ftruncate(%llu) failed: %m\n", (unsigned long long)sz);
+ abort();
+ }
+
+ return fd;
+}
+
+static __u64 mfd_assert_get_seals(int fd)
+{
+ long r;
+
+ r = fcntl(fd, F_GET_SEALS);
+ if (r < 0) {
+ printf("GET_SEALS(%d) failed: %m\n", fd);
+ abort();
+ }
+
+ return r;
+}
+
+static void mfd_assert_has_seals(int fd, __u64 seals)
+{
+ __u64 s;
+
+ s = mfd_assert_get_seals(fd);
+ if (s != seals) {
+ printf("%llu != %llu = GET_SEALS(%d)\n",
+ (unsigned long long)seals, (unsigned long long)s, fd);
+ abort();
+ }
+}
+
+static void mfd_assert_add_seals(int fd, __u64 seals)
+{
+ long r;
+ __u64 s;
+
+ s = mfd_assert_get_seals(fd);
+ r = fcntl(fd, F_ADD_SEALS, seals);
+ if (r < 0) {
+ printf("ADD_SEALS(%d, %llu -> %llu) failed: %m\n",
+ fd, (unsigned long long)s, (unsigned long long)seals);
+ abort();
+ }
+}
+
+static int mfd_busy_add_seals(int fd, __u64 seals)
+{
+ long r;
+ __u64 s;
+
+ r = fcntl(fd, F_GET_SEALS);
+ if (r < 0)
+ s = 0;
+ else
+ s = r;
+
+ r = fcntl(fd, F_ADD_SEALS, seals);
+ if (r < 0 && errno != EBUSY) {
+ printf("ADD_SEALS(%d, %llu -> %llu) didn't fail as expected with EBUSY: %m\n",
+ fd, (unsigned long long)s, (unsigned long long)seals);
+ abort();
+ }
+
+ return r;
+}
+
+static void *mfd_assert_mmap_shared(int fd)
+{
+ void *p;
+
+ p = mmap(NULL,
+ MFD_DEF_SIZE,
+ PROT_READ | PROT_WRITE,
+ MAP_SHARED,
+ fd,
+ 0);
+ if (p == MAP_FAILED) {
+ printf("mmap() failed: %m\n");
+ abort();
+ }
+
+ return p;
+}
+
+static void *mfd_assert_mmap_private(int fd)
+{
+ void *p;
+
+ p = mmap(NULL,
+ MFD_DEF_SIZE,
+ PROT_READ | PROT_WRITE,
+ MAP_PRIVATE,
+ fd,
+ 0);
+ if (p == MAP_FAILED) {
+ printf("mmap() failed: %m\n");
+ abort();
+ }
+
+ return p;
+}
+
+static int global_mfd = -1;
+static void *global_p = NULL;
+
+static int sealing_thread_fn(void *arg)
+{
+ int sig, r;
+
+ /*
+ * This thread first waits 200ms so any pending operation in the parent
+ * is correctly started. After that, it tries to seal @global_mfd as
+ * SEAL_WRITE. This _must_ fail as the parent thread has a read() into
+ * that memory mapped object still ongoing.
+ * We then wait one more second and try sealing again. This time it
+ * must succeed as there shouldn't be anyone else pinning the pages.
+ */
+
+ /* wait 200ms for FUSE-request to be active */
+ usleep(200000);
+
+ /* unmount mapping before sealing to avoid i_mmap_writable failures */
+ munmap(global_p, MFD_DEF_SIZE);
+
+ /* Try sealing the global file; expect EBUSY or success. Current
+ * kernels will never succeed, but in the future, kernels might
+ * implement page-replacements or other fancy ways to avoid racing
+ * writes. */
+ r = mfd_busy_add_seals(global_mfd, F_SEAL_WRITE);
+ if (r >= 0) {
+ printf("HURRAY! This kernel fixed GUP races!\n");
+ } else {
+ /* wait 1s more so the FUSE-request is done */
+ sleep(1);
+
+ /* try sealing the global file again */
+ mfd_assert_add_seals(global_mfd, F_SEAL_WRITE);
+ }
+
+ return 0;
+}
+
+static pid_t spawn_sealing_thread(void)
+{
+ uint8_t *stack;
+ pid_t pid;
+
+ stack = malloc(STACK_SIZE);
+ if (!stack) {
+ printf("malloc(STACK_SIZE) failed: %m\n");
+ abort();
+ }
+
+ pid = clone(sealing_thread_fn,
+ stack + STACK_SIZE,
+ SIGCHLD | CLONE_FILES | CLONE_FS | CLONE_VM,
+ NULL);
+ if (pid < 0) {
+ printf("clone() failed: %m\n");
+ abort();
+ }
+
+ return pid;
+}
+
+static void join_sealing_thread(pid_t pid)
+{
+ waitpid(pid, NULL, 0);
+}
+
+int main(int argc, char **argv)
+{
+ static const char zero[MFD_DEF_SIZE];
+ int fd, mfd, r;
+ void *p;
+ int was_sealed;
+ pid_t pid;
+
+ if (argc < 2) {
+ printf("error: please pass path to file in fuse_mnt mount-point\n");
+ abort();
+ }
+
+ /* open FUSE memfd file for GUP testing */
+ printf("opening: %s\n", argv[1]);
+ fd = open(argv[1], O_RDONLY | O_CLOEXEC);
+ if (fd < 0) {
+ printf("cannot open(\"%s\"): %m\n", argv[1]);
+ abort();
+ }
+
+ /* create new memfd-object */
+ mfd = mfd_assert_new("kern_memfd_fuse",
+ MFD_DEF_SIZE,
+ MFD_CLOEXEC | MFD_ALLOW_SEALING);
+
+ /* mmap memfd-object for writing */
+ p = mfd_assert_mmap_shared(mfd);
+
+ /* pass mfd+mapping to a separate sealing-thread which tries to seal
+ * the memfd objects with SEAL_WRITE while we write into it */
+ global_mfd = mfd;
+ global_p = p;
+ pid = spawn_sealing_thread();
+
+ /* Use read() on the FUSE file to read into our memory-mapped memfd
+ * object. This races the other thread which tries to seal the
+ * memfd-object.
+ * If @fd is on the memfd-fake-FUSE-FS, the read() is delayed by 1s.
+ * This guarantees that the receive-buffer is pinned for 1s until the
+ * data is written into it. The racing ADD_SEALS should thus fail as
+ * the pages are still pinned. */
+ r = read(fd, p, MFD_DEF_SIZE);
+ if (r < 0) {
+ printf("read() failed: %m\n");
+ abort();
+ } else if (!r) {
+ printf("unexpected EOF on read()\n");
+ abort();
+ }
+
+ was_sealed = mfd_assert_get_seals(mfd) & F_SEAL_WRITE;
+
+ /* Wait for sealing-thread to finish and verify that it
+ * successfully sealed the file after the second try. */
+ join_sealing_thread(pid);
+ mfd_assert_has_seals(mfd, F_SEAL_WRITE);
+
+ /* *IF* the memfd-object was sealed at the time our read() returned,
+ * then the kernel did a page-replacement or canceled the read() (or
+ * whatever magic it did..). In that case, the memfd object is still
+ * all zero.
+ * In case the memfd-object was *not* sealed, the read() was successfull
+ * and the memfd object must *not* be all zero.
+ * Note that in real scenarios, there might be a mixture of both, but
+ * in this test-cases, we have explicit 200ms delays which should be
+ * enough to avoid any in-flight writes. */
+
+ p = mfd_assert_mmap_private(mfd);
+ if (was_sealed && memcmp(p, zero, MFD_DEF_SIZE)) {
+ printf("memfd sealed during read() but data not discarded\n");
+ abort();
+ } else if (!was_sealed && !memcmp(p, zero, MFD_DEF_SIZE)) {
+ printf("memfd sealed after read() but data discarded\n");
+ abort();
+ }
+
+ close(mfd);
+ close(fd);
+
+ printf("fuse: DONE\n");
+
+ return 0;
+}
diff --git a/kernel/tools/testing/selftests/memfd/memfd_test.c b/kernel/tools/testing/selftests/memfd/memfd_test.c
new file mode 100644
index 000000000..0b9eafb7a
--- /dev/null
+++ b/kernel/tools/testing/selftests/memfd/memfd_test.c
@@ -0,0 +1,911 @@
+#define _GNU_SOURCE
+#define __EXPORTED_HEADERS__
+
+#include <errno.h>
+#include <inttypes.h>
+#include <limits.h>
+#include <linux/falloc.h>
+#include <linux/fcntl.h>
+#include <linux/memfd.h>
+#include <sched.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <signal.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <sys/syscall.h>
+#include <unistd.h>
+
+#define MFD_DEF_SIZE 8192
+#define STACK_SIZE 65535
+
+static int sys_memfd_create(const char *name,
+ unsigned int flags)
+{
+ return syscall(__NR_memfd_create, name, flags);
+}
+
+static int mfd_assert_new(const char *name, loff_t sz, unsigned int flags)
+{
+ int r, fd;
+
+ fd = sys_memfd_create(name, flags);
+ if (fd < 0) {
+ printf("memfd_create(\"%s\", %u) failed: %m\n",
+ name, flags);
+ abort();
+ }
+
+ r = ftruncate(fd, sz);
+ if (r < 0) {
+ printf("ftruncate(%llu) failed: %m\n", (unsigned long long)sz);
+ abort();
+ }
+
+ return fd;
+}
+
+static void mfd_fail_new(const char *name, unsigned int flags)
+{
+ int r;
+
+ r = sys_memfd_create(name, flags);
+ if (r >= 0) {
+ printf("memfd_create(\"%s\", %u) succeeded, but failure expected\n",
+ name, flags);
+ close(r);
+ abort();
+ }
+}
+
+static unsigned int mfd_assert_get_seals(int fd)
+{
+ int r;
+
+ r = fcntl(fd, F_GET_SEALS);
+ if (r < 0) {
+ printf("GET_SEALS(%d) failed: %m\n", fd);
+ abort();
+ }
+
+ return (unsigned int)r;
+}
+
+static void mfd_assert_has_seals(int fd, unsigned int seals)
+{
+ unsigned int s;
+
+ s = mfd_assert_get_seals(fd);
+ if (s != seals) {
+ printf("%u != %u = GET_SEALS(%d)\n", seals, s, fd);
+ abort();
+ }
+}
+
+static void mfd_assert_add_seals(int fd, unsigned int seals)
+{
+ int r;
+ unsigned int s;
+
+ s = mfd_assert_get_seals(fd);
+ r = fcntl(fd, F_ADD_SEALS, seals);
+ if (r < 0) {
+ printf("ADD_SEALS(%d, %u -> %u) failed: %m\n", fd, s, seals);
+ abort();
+ }
+}
+
+static void mfd_fail_add_seals(int fd, unsigned int seals)
+{
+ int r;
+ unsigned int s;
+
+ r = fcntl(fd, F_GET_SEALS);
+ if (r < 0)
+ s = 0;
+ else
+ s = (unsigned int)r;
+
+ r = fcntl(fd, F_ADD_SEALS, seals);
+ if (r >= 0) {
+ printf("ADD_SEALS(%d, %u -> %u) didn't fail as expected\n",
+ fd, s, seals);
+ abort();
+ }
+}
+
+static void mfd_assert_size(int fd, size_t size)
+{
+ struct stat st;
+ int r;
+
+ r = fstat(fd, &st);
+ if (r < 0) {
+ printf("fstat(%d) failed: %m\n", fd);
+ abort();
+ } else if (st.st_size != size) {
+ printf("wrong file size %lld, but expected %lld\n",
+ (long long)st.st_size, (long long)size);
+ abort();
+ }
+}
+
+static int mfd_assert_dup(int fd)
+{
+ int r;
+
+ r = dup(fd);
+ if (r < 0) {
+ printf("dup(%d) failed: %m\n", fd);
+ abort();
+ }
+
+ return r;
+}
+
+static void *mfd_assert_mmap_shared(int fd)
+{
+ void *p;
+
+ p = mmap(NULL,
+ MFD_DEF_SIZE,
+ PROT_READ | PROT_WRITE,
+ MAP_SHARED,
+ fd,
+ 0);
+ if (p == MAP_FAILED) {
+ printf("mmap() failed: %m\n");
+ abort();
+ }
+
+ return p;
+}
+
+static void *mfd_assert_mmap_private(int fd)
+{
+ void *p;
+
+ p = mmap(NULL,
+ MFD_DEF_SIZE,
+ PROT_READ,
+ MAP_PRIVATE,
+ fd,
+ 0);
+ if (p == MAP_FAILED) {
+ printf("mmap() failed: %m\n");
+ abort();
+ }
+
+ return p;
+}
+
+static int mfd_assert_open(int fd, int flags, mode_t mode)
+{
+ char buf[512];
+ int r;
+
+ sprintf(buf, "/proc/self/fd/%d", fd);
+ r = open(buf, flags, mode);
+ if (r < 0) {
+ printf("open(%s) failed: %m\n", buf);
+ abort();
+ }
+
+ return r;
+}
+
+static void mfd_fail_open(int fd, int flags, mode_t mode)
+{
+ char buf[512];
+ int r;
+
+ sprintf(buf, "/proc/self/fd/%d", fd);
+ r = open(buf, flags, mode);
+ if (r >= 0) {
+ printf("open(%s) didn't fail as expected\n", buf);
+ abort();
+ }
+}
+
+static void mfd_assert_read(int fd)
+{
+ char buf[16];
+ void *p;
+ ssize_t l;
+
+ l = read(fd, buf, sizeof(buf));
+ if (l != sizeof(buf)) {
+ printf("read() failed: %m\n");
+ abort();
+ }
+
+ /* verify PROT_READ *is* allowed */
+ p = mmap(NULL,
+ MFD_DEF_SIZE,
+ PROT_READ,
+ MAP_PRIVATE,
+ fd,
+ 0);
+ if (p == MAP_FAILED) {
+ printf("mmap() failed: %m\n");
+ abort();
+ }
+ munmap(p, MFD_DEF_SIZE);
+
+ /* verify MAP_PRIVATE is *always* allowed (even writable) */
+ p = mmap(NULL,
+ MFD_DEF_SIZE,
+ PROT_READ | PROT_WRITE,
+ MAP_PRIVATE,
+ fd,
+ 0);
+ if (p == MAP_FAILED) {
+ printf("mmap() failed: %m\n");
+ abort();
+ }
+ munmap(p, MFD_DEF_SIZE);
+}
+
+static void mfd_assert_write(int fd)
+{
+ ssize_t l;
+ void *p;
+ int r;
+
+ /* verify write() succeeds */
+ l = write(fd, "\0\0\0\0", 4);
+ if (l != 4) {
+ printf("write() failed: %m\n");
+ abort();
+ }
+
+ /* verify PROT_READ | PROT_WRITE is allowed */
+ p = mmap(NULL,
+ MFD_DEF_SIZE,
+ PROT_READ | PROT_WRITE,
+ MAP_SHARED,
+ fd,
+ 0);
+ if (p == MAP_FAILED) {
+ printf("mmap() failed: %m\n");
+ abort();
+ }
+ *(char *)p = 0;
+ munmap(p, MFD_DEF_SIZE);
+
+ /* verify PROT_WRITE is allowed */
+ p = mmap(NULL,
+ MFD_DEF_SIZE,
+ PROT_WRITE,
+ MAP_SHARED,
+ fd,
+ 0);
+ if (p == MAP_FAILED) {
+ printf("mmap() failed: %m\n");
+ abort();
+ }
+ *(char *)p = 0;
+ munmap(p, MFD_DEF_SIZE);
+
+ /* verify PROT_READ with MAP_SHARED is allowed and a following
+ * mprotect(PROT_WRITE) allows writing */
+ p = mmap(NULL,
+ MFD_DEF_SIZE,
+ PROT_READ,
+ MAP_SHARED,
+ fd,
+ 0);
+ if (p == MAP_FAILED) {
+ printf("mmap() failed: %m\n");
+ abort();
+ }
+
+ r = mprotect(p, MFD_DEF_SIZE, PROT_READ | PROT_WRITE);
+ if (r < 0) {
+ printf("mprotect() failed: %m\n");
+ abort();
+ }
+
+ *(char *)p = 0;
+ munmap(p, MFD_DEF_SIZE);
+
+ /* verify PUNCH_HOLE works */
+ r = fallocate(fd,
+ FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
+ 0,
+ MFD_DEF_SIZE);
+ if (r < 0) {
+ printf("fallocate(PUNCH_HOLE) failed: %m\n");
+ abort();
+ }
+}
+
+static void mfd_fail_write(int fd)
+{
+ ssize_t l;
+ void *p;
+ int r;
+
+ /* verify write() fails */
+ l = write(fd, "data", 4);
+ if (l != -EPERM) {
+ printf("expected EPERM on write(), but got %d: %m\n", (int)l);
+ abort();
+ }
+
+ /* verify PROT_READ | PROT_WRITE is not allowed */
+ p = mmap(NULL,
+ MFD_DEF_SIZE,
+ PROT_READ | PROT_WRITE,
+ MAP_SHARED,
+ fd,
+ 0);
+ if (p != MAP_FAILED) {
+ printf("mmap() didn't fail as expected\n");
+ abort();
+ }
+
+ /* verify PROT_WRITE is not allowed */
+ p = mmap(NULL,
+ MFD_DEF_SIZE,
+ PROT_WRITE,
+ MAP_SHARED,
+ fd,
+ 0);
+ if (p != MAP_FAILED) {
+ printf("mmap() didn't fail as expected\n");
+ abort();
+ }
+
+ /* Verify PROT_READ with MAP_SHARED with a following mprotect is not
+ * allowed. Note that for r/w the kernel already prevents the mmap. */
+ p = mmap(NULL,
+ MFD_DEF_SIZE,
+ PROT_READ,
+ MAP_SHARED,
+ fd,
+ 0);
+ if (p != MAP_FAILED) {
+ r = mprotect(p, MFD_DEF_SIZE, PROT_READ | PROT_WRITE);
+ if (r >= 0) {
+ printf("mmap()+mprotect() didn't fail as expected\n");
+ abort();
+ }
+ }
+
+ /* verify PUNCH_HOLE fails */
+ r = fallocate(fd,
+ FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
+ 0,
+ MFD_DEF_SIZE);
+ if (r >= 0) {
+ printf("fallocate(PUNCH_HOLE) didn't fail as expected\n");
+ abort();
+ }
+}
+
+static void mfd_assert_shrink(int fd)
+{
+ int r, fd2;
+
+ r = ftruncate(fd, MFD_DEF_SIZE / 2);
+ if (r < 0) {
+ printf("ftruncate(SHRINK) failed: %m\n");
+ abort();
+ }
+
+ mfd_assert_size(fd, MFD_DEF_SIZE / 2);
+
+ fd2 = mfd_assert_open(fd,
+ O_RDWR | O_CREAT | O_TRUNC,
+ S_IRUSR | S_IWUSR);
+ close(fd2);
+
+ mfd_assert_size(fd, 0);
+}
+
+static void mfd_fail_shrink(int fd)
+{
+ int r;
+
+ r = ftruncate(fd, MFD_DEF_SIZE / 2);
+ if (r >= 0) {
+ printf("ftruncate(SHRINK) didn't fail as expected\n");
+ abort();
+ }
+
+ mfd_fail_open(fd,
+ O_RDWR | O_CREAT | O_TRUNC,
+ S_IRUSR | S_IWUSR);
+}
+
+static void mfd_assert_grow(int fd)
+{
+ int r;
+
+ r = ftruncate(fd, MFD_DEF_SIZE * 2);
+ if (r < 0) {
+ printf("ftruncate(GROW) failed: %m\n");
+ abort();
+ }
+
+ mfd_assert_size(fd, MFD_DEF_SIZE * 2);
+
+ r = fallocate(fd,
+ 0,
+ 0,
+ MFD_DEF_SIZE * 4);
+ if (r < 0) {
+ printf("fallocate(ALLOC) failed: %m\n");
+ abort();
+ }
+
+ mfd_assert_size(fd, MFD_DEF_SIZE * 4);
+}
+
+static void mfd_fail_grow(int fd)
+{
+ int r;
+
+ r = ftruncate(fd, MFD_DEF_SIZE * 2);
+ if (r >= 0) {
+ printf("ftruncate(GROW) didn't fail as expected\n");
+ abort();
+ }
+
+ r = fallocate(fd,
+ 0,
+ 0,
+ MFD_DEF_SIZE * 4);
+ if (r >= 0) {
+ printf("fallocate(ALLOC) didn't fail as expected\n");
+ abort();
+ }
+}
+
+static void mfd_assert_grow_write(int fd)
+{
+ static char buf[MFD_DEF_SIZE * 8];
+ ssize_t l;
+
+ l = pwrite(fd, buf, sizeof(buf), 0);
+ if (l != sizeof(buf)) {
+ printf("pwrite() failed: %m\n");
+ abort();
+ }
+
+ mfd_assert_size(fd, MFD_DEF_SIZE * 8);
+}
+
+static void mfd_fail_grow_write(int fd)
+{
+ static char buf[MFD_DEF_SIZE * 8];
+ ssize_t l;
+
+ l = pwrite(fd, buf, sizeof(buf), 0);
+ if (l == sizeof(buf)) {
+ printf("pwrite() didn't fail as expected\n");
+ abort();
+ }
+}
+
+static int idle_thread_fn(void *arg)
+{
+ sigset_t set;
+ int sig;
+
+ /* dummy waiter; SIGTERM terminates us anyway */
+ sigemptyset(&set);
+ sigaddset(&set, SIGTERM);
+ sigwait(&set, &sig);
+
+ return 0;
+}
+
+static pid_t spawn_idle_thread(unsigned int flags)
+{
+ uint8_t *stack;
+ pid_t pid;
+
+ stack = malloc(STACK_SIZE);
+ if (!stack) {
+ printf("malloc(STACK_SIZE) failed: %m\n");
+ abort();
+ }
+
+ pid = clone(idle_thread_fn,
+ stack + STACK_SIZE,
+ SIGCHLD | flags,
+ NULL);
+ if (pid < 0) {
+ printf("clone() failed: %m\n");
+ abort();
+ }
+
+ return pid;
+}
+
+static void join_idle_thread(pid_t pid)
+{
+ kill(pid, SIGTERM);
+ waitpid(pid, NULL, 0);
+}
+
+/*
+ * Test memfd_create() syscall
+ * Verify syscall-argument validation, including name checks, flag validation
+ * and more.
+ */
+static void test_create(void)
+{
+ char buf[2048];
+ int fd;
+
+ /* test NULL name */
+ mfd_fail_new(NULL, 0);
+
+ /* test over-long name (not zero-terminated) */
+ memset(buf, 0xff, sizeof(buf));
+ mfd_fail_new(buf, 0);
+
+ /* test over-long zero-terminated name */
+ memset(buf, 0xff, sizeof(buf));
+ buf[sizeof(buf) - 1] = 0;
+ mfd_fail_new(buf, 0);
+
+ /* verify "" is a valid name */
+ fd = mfd_assert_new("", 0, 0);
+ close(fd);
+
+ /* verify invalid O_* open flags */
+ mfd_fail_new("", 0x0100);
+ mfd_fail_new("", ~MFD_CLOEXEC);
+ mfd_fail_new("", ~MFD_ALLOW_SEALING);
+ mfd_fail_new("", ~0);
+ mfd_fail_new("", 0x80000000U);
+
+ /* verify MFD_CLOEXEC is allowed */
+ fd = mfd_assert_new("", 0, MFD_CLOEXEC);
+ close(fd);
+
+ /* verify MFD_ALLOW_SEALING is allowed */
+ fd = mfd_assert_new("", 0, MFD_ALLOW_SEALING);
+ close(fd);
+
+ /* verify MFD_ALLOW_SEALING | MFD_CLOEXEC is allowed */
+ fd = mfd_assert_new("", 0, MFD_ALLOW_SEALING | MFD_CLOEXEC);
+ close(fd);
+}
+
+/*
+ * Test basic sealing
+ * A very basic sealing test to see whether setting/retrieving seals works.
+ */
+static void test_basic(void)
+{
+ int fd;
+
+ fd = mfd_assert_new("kern_memfd_basic",
+ MFD_DEF_SIZE,
+ MFD_CLOEXEC | MFD_ALLOW_SEALING);
+
+ /* add basic seals */
+ mfd_assert_has_seals(fd, 0);
+ mfd_assert_add_seals(fd, F_SEAL_SHRINK |
+ F_SEAL_WRITE);
+ mfd_assert_has_seals(fd, F_SEAL_SHRINK |
+ F_SEAL_WRITE);
+
+ /* add them again */
+ mfd_assert_add_seals(fd, F_SEAL_SHRINK |
+ F_SEAL_WRITE);
+ mfd_assert_has_seals(fd, F_SEAL_SHRINK |
+ F_SEAL_WRITE);
+
+ /* add more seals and seal against sealing */
+ mfd_assert_add_seals(fd, F_SEAL_GROW | F_SEAL_SEAL);
+ mfd_assert_has_seals(fd, F_SEAL_SHRINK |
+ F_SEAL_GROW |
+ F_SEAL_WRITE |
+ F_SEAL_SEAL);
+
+ /* verify that sealing no longer works */
+ mfd_fail_add_seals(fd, F_SEAL_GROW);
+ mfd_fail_add_seals(fd, 0);
+
+ close(fd);
+
+ /* verify sealing does not work without MFD_ALLOW_SEALING */
+ fd = mfd_assert_new("kern_memfd_basic",
+ MFD_DEF_SIZE,
+ MFD_CLOEXEC);
+ mfd_assert_has_seals(fd, F_SEAL_SEAL);
+ mfd_fail_add_seals(fd, F_SEAL_SHRINK |
+ F_SEAL_GROW |
+ F_SEAL_WRITE);
+ mfd_assert_has_seals(fd, F_SEAL_SEAL);
+ close(fd);
+}
+
+/*
+ * Test SEAL_WRITE
+ * Test whether SEAL_WRITE actually prevents modifications.
+ */
+static void test_seal_write(void)
+{
+ int fd;
+
+ fd = mfd_assert_new("kern_memfd_seal_write",
+ MFD_DEF_SIZE,
+ MFD_CLOEXEC | MFD_ALLOW_SEALING);
+ mfd_assert_has_seals(fd, 0);
+ mfd_assert_add_seals(fd, F_SEAL_WRITE);
+ mfd_assert_has_seals(fd, F_SEAL_WRITE);
+
+ mfd_assert_read(fd);
+ mfd_fail_write(fd);
+ mfd_assert_shrink(fd);
+ mfd_assert_grow(fd);
+ mfd_fail_grow_write(fd);
+
+ close(fd);
+}
+
+/*
+ * Test SEAL_SHRINK
+ * Test whether SEAL_SHRINK actually prevents shrinking
+ */
+static void test_seal_shrink(void)
+{
+ int fd;
+
+ fd = mfd_assert_new("kern_memfd_seal_shrink",
+ MFD_DEF_SIZE,
+ MFD_CLOEXEC | MFD_ALLOW_SEALING);
+ mfd_assert_has_seals(fd, 0);
+ mfd_assert_add_seals(fd, F_SEAL_SHRINK);
+ mfd_assert_has_seals(fd, F_SEAL_SHRINK);
+
+ mfd_assert_read(fd);
+ mfd_assert_write(fd);
+ mfd_fail_shrink(fd);
+ mfd_assert_grow(fd);
+ mfd_assert_grow_write(fd);
+
+ close(fd);
+}
+
+/*
+ * Test SEAL_GROW
+ * Test whether SEAL_GROW actually prevents growing
+ */
+static void test_seal_grow(void)
+{
+ int fd;
+
+ fd = mfd_assert_new("kern_memfd_seal_grow",
+ MFD_DEF_SIZE,
+ MFD_CLOEXEC | MFD_ALLOW_SEALING);
+ mfd_assert_has_seals(fd, 0);
+ mfd_assert_add_seals(fd, F_SEAL_GROW);
+ mfd_assert_has_seals(fd, F_SEAL_GROW);
+
+ mfd_assert_read(fd);
+ mfd_assert_write(fd);
+ mfd_assert_shrink(fd);
+ mfd_fail_grow(fd);
+ mfd_fail_grow_write(fd);
+
+ close(fd);
+}
+
+/*
+ * Test SEAL_SHRINK | SEAL_GROW
+ * Test whether SEAL_SHRINK | SEAL_GROW actually prevents resizing
+ */
+static void test_seal_resize(void)
+{
+ int fd;
+
+ fd = mfd_assert_new("kern_memfd_seal_resize",
+ MFD_DEF_SIZE,
+ MFD_CLOEXEC | MFD_ALLOW_SEALING);
+ mfd_assert_has_seals(fd, 0);
+ mfd_assert_add_seals(fd, F_SEAL_SHRINK | F_SEAL_GROW);
+ mfd_assert_has_seals(fd, F_SEAL_SHRINK | F_SEAL_GROW);
+
+ mfd_assert_read(fd);
+ mfd_assert_write(fd);
+ mfd_fail_shrink(fd);
+ mfd_fail_grow(fd);
+ mfd_fail_grow_write(fd);
+
+ close(fd);
+}
+
+/*
+ * Test sharing via dup()
+ * Test that seals are shared between dupped FDs and they're all equal.
+ */
+static void test_share_dup(void)
+{
+ int fd, fd2;
+
+ fd = mfd_assert_new("kern_memfd_share_dup",
+ MFD_DEF_SIZE,
+ MFD_CLOEXEC | MFD_ALLOW_SEALING);
+ mfd_assert_has_seals(fd, 0);
+
+ fd2 = mfd_assert_dup(fd);
+ mfd_assert_has_seals(fd2, 0);
+
+ mfd_assert_add_seals(fd, F_SEAL_WRITE);
+ mfd_assert_has_seals(fd, F_SEAL_WRITE);
+ mfd_assert_has_seals(fd2, F_SEAL_WRITE);
+
+ mfd_assert_add_seals(fd2, F_SEAL_SHRINK);
+ mfd_assert_has_seals(fd, F_SEAL_WRITE | F_SEAL_SHRINK);
+ mfd_assert_has_seals(fd2, F_SEAL_WRITE | F_SEAL_SHRINK);
+
+ mfd_assert_add_seals(fd, F_SEAL_SEAL);
+ mfd_assert_has_seals(fd, F_SEAL_WRITE | F_SEAL_SHRINK | F_SEAL_SEAL);
+ mfd_assert_has_seals(fd2, F_SEAL_WRITE | F_SEAL_SHRINK | F_SEAL_SEAL);
+
+ mfd_fail_add_seals(fd, F_SEAL_GROW);
+ mfd_fail_add_seals(fd2, F_SEAL_GROW);
+ mfd_fail_add_seals(fd, F_SEAL_SEAL);
+ mfd_fail_add_seals(fd2, F_SEAL_SEAL);
+
+ close(fd2);
+
+ mfd_fail_add_seals(fd, F_SEAL_GROW);
+ close(fd);
+}
+
+/*
+ * Test sealing with active mmap()s
+ * Modifying seals is only allowed if no other mmap() refs exist.
+ */
+static void test_share_mmap(void)
+{
+ int fd;
+ void *p;
+
+ fd = mfd_assert_new("kern_memfd_share_mmap",
+ MFD_DEF_SIZE,
+ MFD_CLOEXEC | MFD_ALLOW_SEALING);
+ mfd_assert_has_seals(fd, 0);
+
+ /* shared/writable ref prevents sealing WRITE, but allows others */
+ p = mfd_assert_mmap_shared(fd);
+ mfd_fail_add_seals(fd, F_SEAL_WRITE);
+ mfd_assert_has_seals(fd, 0);
+ mfd_assert_add_seals(fd, F_SEAL_SHRINK);
+ mfd_assert_has_seals(fd, F_SEAL_SHRINK);
+ munmap(p, MFD_DEF_SIZE);
+
+ /* readable ref allows sealing */
+ p = mfd_assert_mmap_private(fd);
+ mfd_assert_add_seals(fd, F_SEAL_WRITE);
+ mfd_assert_has_seals(fd, F_SEAL_WRITE | F_SEAL_SHRINK);
+ munmap(p, MFD_DEF_SIZE);
+
+ close(fd);
+}
+
+/*
+ * Test sealing with open(/proc/self/fd/%d)
+ * Via /proc we can get access to a separate file-context for the same memfd.
+ * This is *not* like dup(), but like a real separate open(). Make sure the
+ * semantics are as expected and we correctly check for RDONLY / WRONLY / RDWR.
+ */
+static void test_share_open(void)
+{
+ int fd, fd2;
+
+ fd = mfd_assert_new("kern_memfd_share_open",
+ MFD_DEF_SIZE,
+ MFD_CLOEXEC | MFD_ALLOW_SEALING);
+ mfd_assert_has_seals(fd, 0);
+
+ fd2 = mfd_assert_open(fd, O_RDWR, 0);
+ mfd_assert_add_seals(fd, F_SEAL_WRITE);
+ mfd_assert_has_seals(fd, F_SEAL_WRITE);
+ mfd_assert_has_seals(fd2, F_SEAL_WRITE);
+
+ mfd_assert_add_seals(fd2, F_SEAL_SHRINK);
+ mfd_assert_has_seals(fd, F_SEAL_WRITE | F_SEAL_SHRINK);
+ mfd_assert_has_seals(fd2, F_SEAL_WRITE | F_SEAL_SHRINK);
+
+ close(fd);
+ fd = mfd_assert_open(fd2, O_RDONLY, 0);
+
+ mfd_fail_add_seals(fd, F_SEAL_SEAL);
+ mfd_assert_has_seals(fd, F_SEAL_WRITE | F_SEAL_SHRINK);
+ mfd_assert_has_seals(fd2, F_SEAL_WRITE | F_SEAL_SHRINK);
+
+ close(fd2);
+ fd2 = mfd_assert_open(fd, O_RDWR, 0);
+
+ mfd_assert_add_seals(fd2, F_SEAL_SEAL);
+ mfd_assert_has_seals(fd, F_SEAL_WRITE | F_SEAL_SHRINK | F_SEAL_SEAL);
+ mfd_assert_has_seals(fd2, F_SEAL_WRITE | F_SEAL_SHRINK | F_SEAL_SEAL);
+
+ close(fd2);
+ close(fd);
+}
+
+/*
+ * Test sharing via fork()
+ * Test whether seal-modifications work as expected with forked childs.
+ */
+static void test_share_fork(void)
+{
+ int fd;
+ pid_t pid;
+
+ fd = mfd_assert_new("kern_memfd_share_fork",
+ MFD_DEF_SIZE,
+ MFD_CLOEXEC | MFD_ALLOW_SEALING);
+ mfd_assert_has_seals(fd, 0);
+
+ pid = spawn_idle_thread(0);
+ mfd_assert_add_seals(fd, F_SEAL_SEAL);
+ mfd_assert_has_seals(fd, F_SEAL_SEAL);
+
+ mfd_fail_add_seals(fd, F_SEAL_WRITE);
+ mfd_assert_has_seals(fd, F_SEAL_SEAL);
+
+ join_idle_thread(pid);
+
+ mfd_fail_add_seals(fd, F_SEAL_WRITE);
+ mfd_assert_has_seals(fd, F_SEAL_SEAL);
+
+ close(fd);
+}
+
+int main(int argc, char **argv)
+{
+ pid_t pid;
+
+ printf("memfd: CREATE\n");
+ test_create();
+ printf("memfd: BASIC\n");
+ test_basic();
+
+ printf("memfd: SEAL-WRITE\n");
+ test_seal_write();
+ printf("memfd: SEAL-SHRINK\n");
+ test_seal_shrink();
+ printf("memfd: SEAL-GROW\n");
+ test_seal_grow();
+ printf("memfd: SEAL-RESIZE\n");
+ test_seal_resize();
+
+ printf("memfd: SHARE-DUP\n");
+ test_share_dup();
+ printf("memfd: SHARE-MMAP\n");
+ test_share_mmap();
+ printf("memfd: SHARE-OPEN\n");
+ test_share_open();
+ printf("memfd: SHARE-FORK\n");
+ test_share_fork();
+
+ /* Run test-suite in a multi-threaded environment with a shared
+ * file-table. */
+ pid = spawn_idle_thread(CLONE_FILES | CLONE_FS | CLONE_VM);
+ printf("memfd: SHARE-DUP (shared file-table)\n");
+ test_share_dup();
+ printf("memfd: SHARE-MMAP (shared file-table)\n");
+ test_share_mmap();
+ printf("memfd: SHARE-OPEN (shared file-table)\n");
+ test_share_open();
+ printf("memfd: SHARE-FORK (shared file-table)\n");
+ test_share_fork();
+ join_idle_thread(pid);
+
+ printf("memfd: DONE\n");
+
+ return 0;
+}
diff --git a/kernel/tools/testing/selftests/memfd/run_fuse_test.sh b/kernel/tools/testing/selftests/memfd/run_fuse_test.sh
new file mode 100644
index 000000000..69b930e1e
--- /dev/null
+++ b/kernel/tools/testing/selftests/memfd/run_fuse_test.sh
@@ -0,0 +1,14 @@
+#!/bin/sh
+
+if test -d "./mnt" ; then
+ fusermount -u ./mnt
+ rmdir ./mnt
+fi
+
+set -e
+
+mkdir mnt
+./fuse_mnt ./mnt
+./fuse_test ./mnt/memfd
+fusermount -u ./mnt
+rmdir ./mnt
diff --git a/kernel/tools/testing/selftests/memory-hotplug/Makefile b/kernel/tools/testing/selftests/memory-hotplug/Makefile
new file mode 100644
index 000000000..afb2624c7
--- /dev/null
+++ b/kernel/tools/testing/selftests/memory-hotplug/Makefile
@@ -0,0 +1,12 @@
+all:
+
+include ../lib.mk
+
+TEST_PROGS := mem-on-off-test.sh
+override RUN_TESTS := ./mem-on-off-test.sh -r 2 || echo "selftests: memory-hotplug [FAIL]"
+override EMIT_TESTS := echo "$(RUN_TESTS)"
+
+run_full_test:
+ @/bin/bash ./mem-on-off-test.sh || echo "memory-hotplug selftests: [FAIL]"
+
+clean:
diff --git a/kernel/tools/testing/selftests/memory-hotplug/mem-on-off-test.sh b/kernel/tools/testing/selftests/memory-hotplug/mem-on-off-test.sh
new file mode 100755
index 000000000..6cddde0b9
--- /dev/null
+++ b/kernel/tools/testing/selftests/memory-hotplug/mem-on-off-test.sh
@@ -0,0 +1,238 @@
+#!/bin/bash
+
+SYSFS=
+
+prerequisite()
+{
+ msg="skip all tests:"
+
+ if [ $UID != 0 ]; then
+ echo $msg must be run as root >&2
+ exit 0
+ fi
+
+ SYSFS=`mount -t sysfs | head -1 | awk '{ print $3 }'`
+
+ if [ ! -d "$SYSFS" ]; then
+ echo $msg sysfs is not mounted >&2
+ exit 0
+ fi
+
+ if ! ls $SYSFS/devices/system/memory/memory* > /dev/null 2>&1; then
+ echo $msg memory hotplug is not supported >&2
+ exit 0
+ fi
+}
+
+#
+# list all hot-pluggable memory
+#
+hotpluggable_memory()
+{
+ local state=${1:-.\*}
+
+ for memory in $SYSFS/devices/system/memory/memory*; do
+ if grep -q 1 $memory/removable &&
+ grep -q $state $memory/state; then
+ echo ${memory##/*/memory}
+ fi
+ done
+}
+
+hotplaggable_offline_memory()
+{
+ hotpluggable_memory offline
+}
+
+hotpluggable_online_memory()
+{
+ hotpluggable_memory online
+}
+
+memory_is_online()
+{
+ grep -q online $SYSFS/devices/system/memory/memory$1/state
+}
+
+memory_is_offline()
+{
+ grep -q offline $SYSFS/devices/system/memory/memory$1/state
+}
+
+online_memory()
+{
+ echo online > $SYSFS/devices/system/memory/memory$1/state
+}
+
+offline_memory()
+{
+ echo offline > $SYSFS/devices/system/memory/memory$1/state
+}
+
+online_memory_expect_success()
+{
+ local memory=$1
+
+ if ! online_memory $memory; then
+ echo $FUNCNAME $memory: unexpected fail >&2
+ elif ! memory_is_online $memory; then
+ echo $FUNCNAME $memory: unexpected offline >&2
+ fi
+}
+
+online_memory_expect_fail()
+{
+ local memory=$1
+
+ if online_memory $memory 2> /dev/null; then
+ echo $FUNCNAME $memory: unexpected success >&2
+ elif ! memory_is_offline $memory; then
+ echo $FUNCNAME $memory: unexpected online >&2
+ fi
+}
+
+offline_memory_expect_success()
+{
+ local memory=$1
+
+ if ! offline_memory $memory; then
+ echo $FUNCNAME $memory: unexpected fail >&2
+ elif ! memory_is_offline $memory; then
+ echo $FUNCNAME $memory: unexpected offline >&2
+ fi
+}
+
+offline_memory_expect_fail()
+{
+ local memory=$1
+
+ if offline_memory $memory 2> /dev/null; then
+ echo $FUNCNAME $memory: unexpected success >&2
+ elif ! memory_is_online $memory; then
+ echo $FUNCNAME $memory: unexpected offline >&2
+ fi
+}
+
+error=-12
+priority=0
+ratio=10
+
+while getopts e:hp:r: opt; do
+ case $opt in
+ e)
+ error=$OPTARG
+ ;;
+ h)
+ echo "Usage $0 [ -e errno ] [ -p notifier-priority ] [ -r percent-of-memory-to-offline ]"
+ exit
+ ;;
+ p)
+ priority=$OPTARG
+ ;;
+ r)
+ ratio=$OPTARG
+ ;;
+ esac
+done
+
+if ! [ "$error" -ge -4095 -a "$error" -lt 0 ]; then
+ echo "error code must be -4095 <= errno < 0" >&2
+ exit 1
+fi
+
+prerequisite
+
+echo "Test scope: $ratio% hotplug memory"
+echo -e "\t online all hotplug memory in offline state"
+echo -e "\t offline $ratio% hotplug memory in online state"
+echo -e "\t online all hotplug memory in offline state"
+
+#
+# Online all hot-pluggable memory
+#
+for memory in `hotplaggable_offline_memory`; do
+ echo offline-online $memory
+ online_memory_expect_success $memory
+done
+
+#
+# Offline $ratio percent of hot-pluggable memory
+#
+for memory in `hotpluggable_online_memory`; do
+ if [ $((RANDOM % 100)) -lt $ratio ]; then
+ echo online-offline $memory
+ offline_memory_expect_success $memory
+ fi
+done
+
+#
+# Online all hot-pluggable memory again
+#
+for memory in `hotplaggable_offline_memory`; do
+ echo offline-online $memory
+ online_memory_expect_success $memory
+done
+
+#
+# Test with memory notifier error injection
+#
+
+DEBUGFS=`mount -t debugfs | head -1 | awk '{ print $3 }'`
+NOTIFIER_ERR_INJECT_DIR=$DEBUGFS/notifier-error-inject/memory
+
+prerequisite_extra()
+{
+ msg="skip extra tests:"
+
+ /sbin/modprobe -q -r memory-notifier-error-inject
+ /sbin/modprobe -q memory-notifier-error-inject priority=$priority
+
+ if [ ! -d "$DEBUGFS" ]; then
+ echo $msg debugfs is not mounted >&2
+ exit 0
+ fi
+
+ if [ ! -d $NOTIFIER_ERR_INJECT_DIR ]; then
+ echo $msg memory-notifier-error-inject module is not available >&2
+ exit 0
+ fi
+}
+
+prerequisite_extra
+
+#
+# Offline $ratio percent of hot-pluggable memory
+#
+echo 0 > $NOTIFIER_ERR_INJECT_DIR/actions/MEM_GOING_OFFLINE/error
+for memory in `hotpluggable_online_memory`; do
+ if [ $((RANDOM % 100)) -lt $ratio ]; then
+ offline_memory_expect_success $memory
+ fi
+done
+
+#
+# Test memory hot-add error handling (offline => online)
+#
+echo $error > $NOTIFIER_ERR_INJECT_DIR/actions/MEM_GOING_ONLINE/error
+for memory in `hotplaggable_offline_memory`; do
+ online_memory_expect_fail $memory
+done
+
+#
+# Online all hot-pluggable memory
+#
+echo 0 > $NOTIFIER_ERR_INJECT_DIR/actions/MEM_GOING_ONLINE/error
+for memory in `hotplaggable_offline_memory`; do
+ online_memory_expect_success $memory
+done
+
+#
+# Test memory hot-remove error handling (online => offline)
+#
+echo $error > $NOTIFIER_ERR_INJECT_DIR/actions/MEM_GOING_OFFLINE/error
+for memory in `hotpluggable_online_memory`; do
+ offline_memory_expect_fail $memory
+done
+
+echo 0 > $NOTIFIER_ERR_INJECT_DIR/actions/MEM_GOING_OFFLINE/error
+/sbin/modprobe -q -r memory-notifier-error-inject
diff --git a/kernel/tools/testing/selftests/mount/.gitignore b/kernel/tools/testing/selftests/mount/.gitignore
new file mode 100644
index 000000000..856ad4107
--- /dev/null
+++ b/kernel/tools/testing/selftests/mount/.gitignore
@@ -0,0 +1 @@
+unprivileged-remount-test
diff --git a/kernel/tools/testing/selftests/mount/Makefile b/kernel/tools/testing/selftests/mount/Makefile
new file mode 100644
index 000000000..95580a973
--- /dev/null
+++ b/kernel/tools/testing/selftests/mount/Makefile
@@ -0,0 +1,16 @@
+# Makefile for mount selftests.
+CFLAGS = -Wall \
+ -O2
+all: unprivileged-remount-test
+
+unprivileged-remount-test: unprivileged-remount-test.c
+ $(CC) $(CFLAGS) unprivileged-remount-test.c -o unprivileged-remount-test
+
+include ../lib.mk
+
+TEST_PROGS := unprivileged-remount-test
+override RUN_TESTS := if [ -f /proc/self/uid_map ] ; then ./unprivileged-remount-test ; fi
+override EMIT_TESTS := echo "$(RUN_TESTS)"
+
+clean:
+ rm -f unprivileged-remount-test
diff --git a/kernel/tools/testing/selftests/mount/unprivileged-remount-test.c b/kernel/tools/testing/selftests/mount/unprivileged-remount-test.c
new file mode 100644
index 000000000..517785052
--- /dev/null
+++ b/kernel/tools/testing/selftests/mount/unprivileged-remount-test.c
@@ -0,0 +1,370 @@
+#define _GNU_SOURCE
+#include <sched.h>
+#include <stdio.h>
+#include <errno.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/mount.h>
+#include <sys/wait.h>
+#include <sys/vfs.h>
+#include <sys/statvfs.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <grp.h>
+#include <stdbool.h>
+#include <stdarg.h>
+
+#ifndef CLONE_NEWNS
+# define CLONE_NEWNS 0x00020000
+#endif
+#ifndef CLONE_NEWUTS
+# define CLONE_NEWUTS 0x04000000
+#endif
+#ifndef CLONE_NEWIPC
+# define CLONE_NEWIPC 0x08000000
+#endif
+#ifndef CLONE_NEWNET
+# define CLONE_NEWNET 0x40000000
+#endif
+#ifndef CLONE_NEWUSER
+# define CLONE_NEWUSER 0x10000000
+#endif
+#ifndef CLONE_NEWPID
+# define CLONE_NEWPID 0x20000000
+#endif
+
+#ifndef MS_REC
+# define MS_REC 16384
+#endif
+#ifndef MS_RELATIME
+# define MS_RELATIME (1 << 21)
+#endif
+#ifndef MS_STRICTATIME
+# define MS_STRICTATIME (1 << 24)
+#endif
+
+static void die(char *fmt, ...)
+{
+ va_list ap;
+ va_start(ap, fmt);
+ vfprintf(stderr, fmt, ap);
+ va_end(ap);
+ exit(EXIT_FAILURE);
+}
+
+static void vmaybe_write_file(bool enoent_ok, char *filename, char *fmt, va_list ap)
+{
+ char buf[4096];
+ int fd;
+ ssize_t written;
+ int buf_len;
+
+ buf_len = vsnprintf(buf, sizeof(buf), fmt, ap);
+ if (buf_len < 0) {
+ die("vsnprintf failed: %s\n",
+ strerror(errno));
+ }
+ if (buf_len >= sizeof(buf)) {
+ die("vsnprintf output truncated\n");
+ }
+
+ fd = open(filename, O_WRONLY);
+ if (fd < 0) {
+ if ((errno == ENOENT) && enoent_ok)
+ return;
+ die("open of %s failed: %s\n",
+ filename, strerror(errno));
+ }
+ written = write(fd, buf, buf_len);
+ if (written != buf_len) {
+ if (written >= 0) {
+ die("short write to %s\n", filename);
+ } else {
+ die("write to %s failed: %s\n",
+ filename, strerror(errno));
+ }
+ }
+ if (close(fd) != 0) {
+ die("close of %s failed: %s\n",
+ filename, strerror(errno));
+ }
+}
+
+static void maybe_write_file(char *filename, char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ vmaybe_write_file(true, filename, fmt, ap);
+ va_end(ap);
+
+}
+
+static void write_file(char *filename, char *fmt, ...)
+{
+ va_list ap;
+
+ va_start(ap, fmt);
+ vmaybe_write_file(false, filename, fmt, ap);
+ va_end(ap);
+
+}
+
+static int read_mnt_flags(const char *path)
+{
+ int ret;
+ struct statvfs stat;
+ int mnt_flags;
+
+ ret = statvfs(path, &stat);
+ if (ret != 0) {
+ die("statvfs of %s failed: %s\n",
+ path, strerror(errno));
+ }
+ if (stat.f_flag & ~(ST_RDONLY | ST_NOSUID | ST_NODEV | \
+ ST_NOEXEC | ST_NOATIME | ST_NODIRATIME | ST_RELATIME | \
+ ST_SYNCHRONOUS | ST_MANDLOCK)) {
+ die("Unrecognized mount flags\n");
+ }
+ mnt_flags = 0;
+ if (stat.f_flag & ST_RDONLY)
+ mnt_flags |= MS_RDONLY;
+ if (stat.f_flag & ST_NOSUID)
+ mnt_flags |= MS_NOSUID;
+ if (stat.f_flag & ST_NODEV)
+ mnt_flags |= MS_NODEV;
+ if (stat.f_flag & ST_NOEXEC)
+ mnt_flags |= MS_NOEXEC;
+ if (stat.f_flag & ST_NOATIME)
+ mnt_flags |= MS_NOATIME;
+ if (stat.f_flag & ST_NODIRATIME)
+ mnt_flags |= MS_NODIRATIME;
+ if (stat.f_flag & ST_RELATIME)
+ mnt_flags |= MS_RELATIME;
+ if (stat.f_flag & ST_SYNCHRONOUS)
+ mnt_flags |= MS_SYNCHRONOUS;
+ if (stat.f_flag & ST_MANDLOCK)
+ mnt_flags |= ST_MANDLOCK;
+
+ return mnt_flags;
+}
+
+static void create_and_enter_userns(void)
+{
+ uid_t uid;
+ gid_t gid;
+
+ uid = getuid();
+ gid = getgid();
+
+ if (unshare(CLONE_NEWUSER) !=0) {
+ die("unshare(CLONE_NEWUSER) failed: %s\n",
+ strerror(errno));
+ }
+
+ maybe_write_file("/proc/self/setgroups", "deny");
+ write_file("/proc/self/uid_map", "0 %d 1", uid);
+ write_file("/proc/self/gid_map", "0 %d 1", gid);
+
+ if (setgid(0) != 0) {
+ die ("setgid(0) failed %s\n",
+ strerror(errno));
+ }
+ if (setuid(0) != 0) {
+ die("setuid(0) failed %s\n",
+ strerror(errno));
+ }
+}
+
+static
+bool test_unpriv_remount(const char *fstype, const char *mount_options,
+ int mount_flags, int remount_flags, int invalid_flags)
+{
+ pid_t child;
+
+ child = fork();
+ if (child == -1) {
+ die("fork failed: %s\n",
+ strerror(errno));
+ }
+ if (child != 0) { /* parent */
+ pid_t pid;
+ int status;
+ pid = waitpid(child, &status, 0);
+ if (pid == -1) {
+ die("waitpid failed: %s\n",
+ strerror(errno));
+ }
+ if (pid != child) {
+ die("waited for %d got %d\n",
+ child, pid);
+ }
+ if (!WIFEXITED(status)) {
+ die("child did not terminate cleanly\n");
+ }
+ return WEXITSTATUS(status) == EXIT_SUCCESS ? true : false;
+ }
+
+ create_and_enter_userns();
+ if (unshare(CLONE_NEWNS) != 0) {
+ die("unshare(CLONE_NEWNS) failed: %s\n",
+ strerror(errno));
+ }
+
+ if (mount("testing", "/tmp", fstype, mount_flags, mount_options) != 0) {
+ die("mount of %s with options '%s' on /tmp failed: %s\n",
+ fstype,
+ mount_options? mount_options : "",
+ strerror(errno));
+ }
+
+ create_and_enter_userns();
+
+ if (unshare(CLONE_NEWNS) != 0) {
+ die("unshare(CLONE_NEWNS) failed: %s\n",
+ strerror(errno));
+ }
+
+ if (mount("/tmp", "/tmp", "none",
+ MS_REMOUNT | MS_BIND | remount_flags, NULL) != 0) {
+ /* system("cat /proc/self/mounts"); */
+ die("remount of /tmp failed: %s\n",
+ strerror(errno));
+ }
+
+ if (mount("/tmp", "/tmp", "none",
+ MS_REMOUNT | MS_BIND | invalid_flags, NULL) == 0) {
+ /* system("cat /proc/self/mounts"); */
+ die("remount of /tmp with invalid flags "
+ "succeeded unexpectedly\n");
+ }
+ exit(EXIT_SUCCESS);
+}
+
+static bool test_unpriv_remount_simple(int mount_flags)
+{
+ return test_unpriv_remount("ramfs", NULL, mount_flags, mount_flags, 0);
+}
+
+static bool test_unpriv_remount_atime(int mount_flags, int invalid_flags)
+{
+ return test_unpriv_remount("ramfs", NULL, mount_flags, mount_flags,
+ invalid_flags);
+}
+
+static bool test_priv_mount_unpriv_remount(void)
+{
+ pid_t child;
+ int ret;
+ const char *orig_path = "/dev";
+ const char *dest_path = "/tmp";
+ int orig_mnt_flags, remount_mnt_flags;
+
+ child = fork();
+ if (child == -1) {
+ die("fork failed: %s\n",
+ strerror(errno));
+ }
+ if (child != 0) { /* parent */
+ pid_t pid;
+ int status;
+ pid = waitpid(child, &status, 0);
+ if (pid == -1) {
+ die("waitpid failed: %s\n",
+ strerror(errno));
+ }
+ if (pid != child) {
+ die("waited for %d got %d\n",
+ child, pid);
+ }
+ if (!WIFEXITED(status)) {
+ die("child did not terminate cleanly\n");
+ }
+ return WEXITSTATUS(status) == EXIT_SUCCESS ? true : false;
+ }
+
+ orig_mnt_flags = read_mnt_flags(orig_path);
+
+ create_and_enter_userns();
+ ret = unshare(CLONE_NEWNS);
+ if (ret != 0) {
+ die("unshare(CLONE_NEWNS) failed: %s\n",
+ strerror(errno));
+ }
+
+ ret = mount(orig_path, dest_path, "bind", MS_BIND | MS_REC, NULL);
+ if (ret != 0) {
+ die("recursive bind mount of %s onto %s failed: %s\n",
+ orig_path, dest_path, strerror(errno));
+ }
+
+ ret = mount(dest_path, dest_path, "none",
+ MS_REMOUNT | MS_BIND | orig_mnt_flags , NULL);
+ if (ret != 0) {
+ /* system("cat /proc/self/mounts"); */
+ die("remount of /tmp failed: %s\n",
+ strerror(errno));
+ }
+
+ remount_mnt_flags = read_mnt_flags(dest_path);
+ if (orig_mnt_flags != remount_mnt_flags) {
+ die("Mount flags unexpectedly changed during remount of %s originally mounted on %s\n",
+ dest_path, orig_path);
+ }
+ exit(EXIT_SUCCESS);
+}
+
+int main(int argc, char **argv)
+{
+ if (!test_unpriv_remount_simple(MS_RDONLY)) {
+ die("MS_RDONLY malfunctions\n");
+ }
+ if (!test_unpriv_remount("devpts", "newinstance", MS_NODEV, MS_NODEV, 0)) {
+ die("MS_NODEV malfunctions\n");
+ }
+ if (!test_unpriv_remount_simple(MS_NOSUID)) {
+ die("MS_NOSUID malfunctions\n");
+ }
+ if (!test_unpriv_remount_simple(MS_NOEXEC)) {
+ die("MS_NOEXEC malfunctions\n");
+ }
+ if (!test_unpriv_remount_atime(MS_RELATIME,
+ MS_NOATIME))
+ {
+ die("MS_RELATIME malfunctions\n");
+ }
+ if (!test_unpriv_remount_atime(MS_STRICTATIME,
+ MS_NOATIME))
+ {
+ die("MS_STRICTATIME malfunctions\n");
+ }
+ if (!test_unpriv_remount_atime(MS_NOATIME,
+ MS_STRICTATIME))
+ {
+ die("MS_NOATIME malfunctions\n");
+ }
+ if (!test_unpriv_remount_atime(MS_RELATIME|MS_NODIRATIME,
+ MS_NOATIME))
+ {
+ die("MS_RELATIME|MS_NODIRATIME malfunctions\n");
+ }
+ if (!test_unpriv_remount_atime(MS_STRICTATIME|MS_NODIRATIME,
+ MS_NOATIME))
+ {
+ die("MS_STRICTATIME|MS_NODIRATIME malfunctions\n");
+ }
+ if (!test_unpriv_remount_atime(MS_NOATIME|MS_NODIRATIME,
+ MS_STRICTATIME))
+ {
+ die("MS_NOATIME|MS_DIRATIME malfunctions\n");
+ }
+ if (!test_unpriv_remount("ramfs", NULL, MS_STRICTATIME, 0, MS_NOATIME))
+ {
+ die("Default atime malfunctions\n");
+ }
+ if (!test_priv_mount_unpriv_remount()) {
+ die("Mount flags unexpectedly changed after remount\n");
+ }
+ return EXIT_SUCCESS;
+}
diff --git a/kernel/tools/testing/selftests/mqueue/.gitignore b/kernel/tools/testing/selftests/mqueue/.gitignore
new file mode 100644
index 000000000..d8d423772
--- /dev/null
+++ b/kernel/tools/testing/selftests/mqueue/.gitignore
@@ -0,0 +1,2 @@
+mq_open_tests
+mq_perf_tests
diff --git a/kernel/tools/testing/selftests/mqueue/Makefile b/kernel/tools/testing/selftests/mqueue/Makefile
new file mode 100644
index 000000000..0e3b41eb8
--- /dev/null
+++ b/kernel/tools/testing/selftests/mqueue/Makefile
@@ -0,0 +1,22 @@
+CFLAGS = -O2
+
+all:
+ $(CC) $(CFLAGS) mq_open_tests.c -o mq_open_tests -lrt
+ $(CC) $(CFLAGS) -o mq_perf_tests mq_perf_tests.c -lrt -lpthread -lpopt
+
+include ../lib.mk
+
+override define RUN_TESTS
+ @./mq_open_tests /test1 || echo "selftests: mq_open_tests [FAIL]"
+ @./mq_perf_tests || echo "selftests: mq_perf_tests [FAIL]"
+endef
+
+TEST_PROGS := mq_open_tests mq_perf_tests
+
+override define EMIT_TESTS
+ echo "./mq_open_tests /test1 || echo \"selftests: mq_open_tests [FAIL]\""
+ echo "./mq_perf_tests || echo \"selftests: mq_perf_tests [FAIL]\""
+endef
+
+clean:
+ rm -f mq_open_tests mq_perf_tests
diff --git a/kernel/tools/testing/selftests/mqueue/mq_open_tests.c b/kernel/tools/testing/selftests/mqueue/mq_open_tests.c
new file mode 100644
index 000000000..9c1a5d359
--- /dev/null
+++ b/kernel/tools/testing/selftests/mqueue/mq_open_tests.c
@@ -0,0 +1,500 @@
+/*
+ * This application is Copyright 2012 Red Hat, Inc.
+ * Doug Ledford <dledford@redhat.com>
+ *
+ * mq_open_tests is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 3.
+ *
+ * mq_open_tests is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * For the full text of the license, see <http://www.gnu.org/licenses/>.
+ *
+ * mq_open_tests.c
+ * Tests the various situations that should either succeed or fail to
+ * open a posix message queue and then reports whether or not they
+ * did as they were supposed to.
+ *
+ */
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <string.h>
+#include <limits.h>
+#include <errno.h>
+#include <sys/types.h>
+#include <sys/time.h>
+#include <sys/resource.h>
+#include <sys/stat.h>
+#include <mqueue.h>
+
+static char *usage =
+"Usage:\n"
+" %s path\n"
+"\n"
+" path Path name of the message queue to create\n"
+"\n"
+" Note: this program must be run as root in order to enable all tests\n"
+"\n";
+
+char *DEF_MSGS = "/proc/sys/fs/mqueue/msg_default";
+char *DEF_MSGSIZE = "/proc/sys/fs/mqueue/msgsize_default";
+char *MAX_MSGS = "/proc/sys/fs/mqueue/msg_max";
+char *MAX_MSGSIZE = "/proc/sys/fs/mqueue/msgsize_max";
+
+int default_settings;
+struct rlimit saved_limits, cur_limits;
+int saved_def_msgs, saved_def_msgsize, saved_max_msgs, saved_max_msgsize;
+int cur_def_msgs, cur_def_msgsize, cur_max_msgs, cur_max_msgsize;
+FILE *def_msgs, *def_msgsize, *max_msgs, *max_msgsize;
+char *queue_path;
+mqd_t queue = -1;
+
+static inline void __set(FILE *stream, int value, char *err_msg);
+void shutdown(int exit_val, char *err_cause, int line_no);
+static inline int get(FILE *stream);
+static inline void set(FILE *stream, int value);
+static inline void getr(int type, struct rlimit *rlim);
+static inline void setr(int type, struct rlimit *rlim);
+void validate_current_settings();
+static inline void test_queue(struct mq_attr *attr, struct mq_attr *result);
+static inline int test_queue_fail(struct mq_attr *attr, struct mq_attr *result);
+
+static inline void __set(FILE *stream, int value, char *err_msg)
+{
+ rewind(stream);
+ if (fprintf(stream, "%d", value) < 0)
+ perror(err_msg);
+}
+
+
+void shutdown(int exit_val, char *err_cause, int line_no)
+{
+ static int in_shutdown = 0;
+
+ /* In case we get called recursively by a set() call below */
+ if (in_shutdown++)
+ return;
+
+ if (seteuid(0) == -1)
+ perror("seteuid() failed");
+
+ if (queue != -1)
+ if (mq_close(queue))
+ perror("mq_close() during shutdown");
+ if (queue_path)
+ /*
+ * Be silent if this fails, if we cleaned up already it's
+ * expected to fail
+ */
+ mq_unlink(queue_path);
+ if (default_settings) {
+ if (saved_def_msgs)
+ __set(def_msgs, saved_def_msgs,
+ "failed to restore saved_def_msgs");
+ if (saved_def_msgsize)
+ __set(def_msgsize, saved_def_msgsize,
+ "failed to restore saved_def_msgsize");
+ }
+ if (saved_max_msgs)
+ __set(max_msgs, saved_max_msgs,
+ "failed to restore saved_max_msgs");
+ if (saved_max_msgsize)
+ __set(max_msgsize, saved_max_msgsize,
+ "failed to restore saved_max_msgsize");
+ if (exit_val)
+ error(exit_val, errno, "%s at %d", err_cause, line_no);
+ exit(0);
+}
+
+static inline int get(FILE *stream)
+{
+ int value;
+ rewind(stream);
+ if (fscanf(stream, "%d", &value) != 1)
+ shutdown(4, "Error reading /proc entry", __LINE__ - 1);
+ return value;
+}
+
+static inline void set(FILE *stream, int value)
+{
+ int new_value;
+
+ rewind(stream);
+ if (fprintf(stream, "%d", value) < 0)
+ return shutdown(5, "Failed writing to /proc file",
+ __LINE__ - 1);
+ new_value = get(stream);
+ if (new_value != value)
+ return shutdown(5, "We didn't get what we wrote to /proc back",
+ __LINE__ - 1);
+}
+
+static inline void getr(int type, struct rlimit *rlim)
+{
+ if (getrlimit(type, rlim))
+ shutdown(6, "getrlimit()", __LINE__ - 1);
+}
+
+static inline void setr(int type, struct rlimit *rlim)
+{
+ if (setrlimit(type, rlim))
+ shutdown(7, "setrlimit()", __LINE__ - 1);
+}
+
+void validate_current_settings()
+{
+ int rlim_needed;
+
+ if (cur_limits.rlim_cur < 4096) {
+ printf("Current rlimit value for POSIX message queue bytes is "
+ "unreasonably low,\nincreasing.\n\n");
+ cur_limits.rlim_cur = 8192;
+ cur_limits.rlim_max = 16384;
+ setr(RLIMIT_MSGQUEUE, &cur_limits);
+ }
+
+ if (default_settings) {
+ rlim_needed = (cur_def_msgs + 1) * (cur_def_msgsize + 1 +
+ 2 * sizeof(void *));
+ if (rlim_needed > cur_limits.rlim_cur) {
+ printf("Temporarily lowering default queue parameters "
+ "to something that will work\n"
+ "with the current rlimit values.\n\n");
+ set(def_msgs, 10);
+ cur_def_msgs = 10;
+ set(def_msgsize, 128);
+ cur_def_msgsize = 128;
+ }
+ } else {
+ rlim_needed = (cur_max_msgs + 1) * (cur_max_msgsize + 1 +
+ 2 * sizeof(void *));
+ if (rlim_needed > cur_limits.rlim_cur) {
+ printf("Temporarily lowering maximum queue parameters "
+ "to something that will work\n"
+ "with the current rlimit values in case this is "
+ "a kernel that ties the default\n"
+ "queue parameters to the maximum queue "
+ "parameters.\n\n");
+ set(max_msgs, 10);
+ cur_max_msgs = 10;
+ set(max_msgsize, 128);
+ cur_max_msgsize = 128;
+ }
+ }
+}
+
+/*
+ * test_queue - Test opening a queue, shutdown if we fail. This should
+ * only be called in situations that should never fail. We clean up
+ * after ourselves and return the queue attributes in *result.
+ */
+static inline void test_queue(struct mq_attr *attr, struct mq_attr *result)
+{
+ int flags = O_RDWR | O_EXCL | O_CREAT;
+ int perms = DEFFILEMODE;
+
+ if ((queue = mq_open(queue_path, flags, perms, attr)) == -1)
+ shutdown(1, "mq_open()", __LINE__);
+ if (mq_getattr(queue, result))
+ shutdown(1, "mq_getattr()", __LINE__);
+ if (mq_close(queue))
+ shutdown(1, "mq_close()", __LINE__);
+ queue = -1;
+ if (mq_unlink(queue_path))
+ shutdown(1, "mq_unlink()", __LINE__);
+}
+
+/*
+ * Same as test_queue above, but failure is not fatal.
+ * Returns:
+ * 0 - Failed to create a queue
+ * 1 - Created a queue, attributes in *result
+ */
+static inline int test_queue_fail(struct mq_attr *attr, struct mq_attr *result)
+{
+ int flags = O_RDWR | O_EXCL | O_CREAT;
+ int perms = DEFFILEMODE;
+
+ if ((queue = mq_open(queue_path, flags, perms, attr)) == -1)
+ return 0;
+ if (mq_getattr(queue, result))
+ shutdown(1, "mq_getattr()", __LINE__);
+ if (mq_close(queue))
+ shutdown(1, "mq_close()", __LINE__);
+ queue = -1;
+ if (mq_unlink(queue_path))
+ shutdown(1, "mq_unlink()", __LINE__);
+ return 1;
+}
+
+int main(int argc, char *argv[])
+{
+ struct mq_attr attr, result;
+
+ if (argc != 2) {
+ fprintf(stderr, "Must pass a valid queue name\n\n");
+ fprintf(stderr, usage, argv[0]);
+ exit(1);
+ }
+
+ /*
+ * Although we can create a msg queue with a non-absolute path name,
+ * unlink will fail. So, if the name doesn't start with a /, add one
+ * when we save it.
+ */
+ if (*argv[1] == '/')
+ queue_path = strdup(argv[1]);
+ else {
+ queue_path = malloc(strlen(argv[1]) + 2);
+ if (!queue_path) {
+ perror("malloc()");
+ exit(1);
+ }
+ queue_path[0] = '/';
+ queue_path[1] = 0;
+ strcat(queue_path, argv[1]);
+ }
+
+ if (getuid() != 0) {
+ fprintf(stderr, "Not running as root, but almost all tests "
+ "require root in order to modify\nsystem settings. "
+ "Exiting.\n");
+ exit(1);
+ }
+
+ /* Find out what files there are for us to make tweaks in */
+ def_msgs = fopen(DEF_MSGS, "r+");
+ def_msgsize = fopen(DEF_MSGSIZE, "r+");
+ max_msgs = fopen(MAX_MSGS, "r+");
+ max_msgsize = fopen(MAX_MSGSIZE, "r+");
+
+ if (!max_msgs)
+ shutdown(2, "Failed to open msg_max", __LINE__);
+ if (!max_msgsize)
+ shutdown(2, "Failed to open msgsize_max", __LINE__);
+ if (def_msgs || def_msgsize)
+ default_settings = 1;
+
+ /* Load up the current system values for everything we can */
+ getr(RLIMIT_MSGQUEUE, &saved_limits);
+ cur_limits = saved_limits;
+ if (default_settings) {
+ saved_def_msgs = cur_def_msgs = get(def_msgs);
+ saved_def_msgsize = cur_def_msgsize = get(def_msgsize);
+ }
+ saved_max_msgs = cur_max_msgs = get(max_msgs);
+ saved_max_msgsize = cur_max_msgsize = get(max_msgsize);
+
+ /* Tell the user our initial state */
+ printf("\nInitial system state:\n");
+ printf("\tUsing queue path:\t\t%s\n", queue_path);
+ printf("\tRLIMIT_MSGQUEUE(soft):\t\t%ld\n",
+ (long) saved_limits.rlim_cur);
+ printf("\tRLIMIT_MSGQUEUE(hard):\t\t%ld\n",
+ (long) saved_limits.rlim_max);
+ printf("\tMaximum Message Size:\t\t%d\n", saved_max_msgsize);
+ printf("\tMaximum Queue Size:\t\t%d\n", saved_max_msgs);
+ if (default_settings) {
+ printf("\tDefault Message Size:\t\t%d\n", saved_def_msgsize);
+ printf("\tDefault Queue Size:\t\t%d\n", saved_def_msgs);
+ } else {
+ printf("\tDefault Message Size:\t\tNot Supported\n");
+ printf("\tDefault Queue Size:\t\tNot Supported\n");
+ }
+ printf("\n");
+
+ validate_current_settings();
+
+ printf("Adjusted system state for testing:\n");
+ printf("\tRLIMIT_MSGQUEUE(soft):\t\t%ld\n", (long) cur_limits.rlim_cur);
+ printf("\tRLIMIT_MSGQUEUE(hard):\t\t%ld\n", (long) cur_limits.rlim_max);
+ printf("\tMaximum Message Size:\t\t%d\n", cur_max_msgsize);
+ printf("\tMaximum Queue Size:\t\t%d\n", cur_max_msgs);
+ if (default_settings) {
+ printf("\tDefault Message Size:\t\t%d\n", cur_def_msgsize);
+ printf("\tDefault Queue Size:\t\t%d\n", cur_def_msgs);
+ }
+
+ printf("\n\nTest series 1, behavior when no attr struct "
+ "passed to mq_open:\n");
+ if (!default_settings) {
+ test_queue(NULL, &result);
+ printf("Given sane system settings, mq_open without an attr "
+ "struct succeeds:\tPASS\n");
+ if (result.mq_maxmsg != cur_max_msgs ||
+ result.mq_msgsize != cur_max_msgsize) {
+ printf("Kernel does not support setting the default "
+ "mq attributes,\nbut also doesn't tie the "
+ "defaults to the maximums:\t\t\tPASS\n");
+ } else {
+ set(max_msgs, ++cur_max_msgs);
+ set(max_msgsize, ++cur_max_msgsize);
+ test_queue(NULL, &result);
+ if (result.mq_maxmsg == cur_max_msgs &&
+ result.mq_msgsize == cur_max_msgsize)
+ printf("Kernel does not support setting the "
+ "default mq attributes and\n"
+ "also ties system wide defaults to "
+ "the system wide maximums:\t\t"
+ "FAIL\n");
+ else
+ printf("Kernel does not support setting the "
+ "default mq attributes,\n"
+ "but also doesn't tie the defaults to "
+ "the maximums:\t\t\tPASS\n");
+ }
+ } else {
+ printf("Kernel supports setting defaults separately from "
+ "maximums:\t\tPASS\n");
+ /*
+ * While we are here, go ahead and test that the kernel
+ * properly follows the default settings
+ */
+ test_queue(NULL, &result);
+ printf("Given sane values, mq_open without an attr struct "
+ "succeeds:\t\tPASS\n");
+ if (result.mq_maxmsg != cur_def_msgs ||
+ result.mq_msgsize != cur_def_msgsize)
+ printf("Kernel supports setting defaults, but does "
+ "not actually honor them:\tFAIL\n\n");
+ else {
+ set(def_msgs, ++cur_def_msgs);
+ set(def_msgsize, ++cur_def_msgsize);
+ /* In case max was the same as the default */
+ set(max_msgs, ++cur_max_msgs);
+ set(max_msgsize, ++cur_max_msgsize);
+ test_queue(NULL, &result);
+ if (result.mq_maxmsg != cur_def_msgs ||
+ result.mq_msgsize != cur_def_msgsize)
+ printf("Kernel supports setting defaults, but "
+ "does not actually honor them:\t"
+ "FAIL\n");
+ else
+ printf("Kernel properly honors default setting "
+ "knobs:\t\t\t\tPASS\n");
+ }
+ set(def_msgs, cur_max_msgs + 1);
+ cur_def_msgs = cur_max_msgs + 1;
+ set(def_msgsize, cur_max_msgsize + 1);
+ cur_def_msgsize = cur_max_msgsize + 1;
+ if (cur_def_msgs * (cur_def_msgsize + 2 * sizeof(void *)) >=
+ cur_limits.rlim_cur) {
+ cur_limits.rlim_cur = (cur_def_msgs + 2) *
+ (cur_def_msgsize + 2 * sizeof(void *));
+ cur_limits.rlim_max = 2 * cur_limits.rlim_cur;
+ setr(RLIMIT_MSGQUEUE, &cur_limits);
+ }
+ if (test_queue_fail(NULL, &result)) {
+ if (result.mq_maxmsg == cur_max_msgs &&
+ result.mq_msgsize == cur_max_msgsize)
+ printf("Kernel properly limits default values "
+ "to lesser of default/max:\t\tPASS\n");
+ else
+ printf("Kernel does not properly set default "
+ "queue parameters when\ndefaults > "
+ "max:\t\t\t\t\t\t\t\tFAIL\n");
+ } else
+ printf("Kernel fails to open mq because defaults are "
+ "greater than maximums:\tFAIL\n");
+ set(def_msgs, --cur_def_msgs);
+ set(def_msgsize, --cur_def_msgsize);
+ cur_limits.rlim_cur = cur_limits.rlim_max = cur_def_msgs *
+ cur_def_msgsize;
+ setr(RLIMIT_MSGQUEUE, &cur_limits);
+ if (test_queue_fail(NULL, &result))
+ printf("Kernel creates queue even though defaults "
+ "would exceed\nrlimit setting:"
+ "\t\t\t\t\t\t\t\tFAIL\n");
+ else
+ printf("Kernel properly fails to create queue when "
+ "defaults would\nexceed rlimit:"
+ "\t\t\t\t\t\t\t\tPASS\n");
+ }
+
+ /*
+ * Test #2 - open with an attr struct that exceeds rlimit
+ */
+ printf("\n\nTest series 2, behavior when attr struct is "
+ "passed to mq_open:\n");
+ cur_max_msgs = 32;
+ cur_max_msgsize = cur_limits.rlim_max >> 4;
+ set(max_msgs, cur_max_msgs);
+ set(max_msgsize, cur_max_msgsize);
+ attr.mq_maxmsg = cur_max_msgs;
+ attr.mq_msgsize = cur_max_msgsize;
+ if (test_queue_fail(&attr, &result))
+ printf("Queue open in excess of rlimit max when euid = 0 "
+ "succeeded:\t\tFAIL\n");
+ else
+ printf("Queue open in excess of rlimit max when euid = 0 "
+ "failed:\t\tPASS\n");
+ attr.mq_maxmsg = cur_max_msgs + 1;
+ attr.mq_msgsize = 10;
+ if (test_queue_fail(&attr, &result))
+ printf("Queue open with mq_maxmsg > limit when euid = 0 "
+ "succeeded:\t\tPASS\n");
+ else
+ printf("Queue open with mq_maxmsg > limit when euid = 0 "
+ "failed:\t\tFAIL\n");
+ attr.mq_maxmsg = 1;
+ attr.mq_msgsize = cur_max_msgsize + 1;
+ if (test_queue_fail(&attr, &result))
+ printf("Queue open with mq_msgsize > limit when euid = 0 "
+ "succeeded:\t\tPASS\n");
+ else
+ printf("Queue open with mq_msgsize > limit when euid = 0 "
+ "failed:\t\tFAIL\n");
+ attr.mq_maxmsg = 65536;
+ attr.mq_msgsize = 65536;
+ if (test_queue_fail(&attr, &result))
+ printf("Queue open with total size > 2GB when euid = 0 "
+ "succeeded:\t\tFAIL\n");
+ else
+ printf("Queue open with total size > 2GB when euid = 0 "
+ "failed:\t\t\tPASS\n");
+
+ if (seteuid(99) == -1) {
+ perror("seteuid() failed");
+ exit(1);
+ }
+
+ attr.mq_maxmsg = cur_max_msgs;
+ attr.mq_msgsize = cur_max_msgsize;
+ if (test_queue_fail(&attr, &result))
+ printf("Queue open in excess of rlimit max when euid = 99 "
+ "succeeded:\t\tFAIL\n");
+ else
+ printf("Queue open in excess of rlimit max when euid = 99 "
+ "failed:\t\tPASS\n");
+ attr.mq_maxmsg = cur_max_msgs + 1;
+ attr.mq_msgsize = 10;
+ if (test_queue_fail(&attr, &result))
+ printf("Queue open with mq_maxmsg > limit when euid = 99 "
+ "succeeded:\t\tFAIL\n");
+ else
+ printf("Queue open with mq_maxmsg > limit when euid = 99 "
+ "failed:\t\tPASS\n");
+ attr.mq_maxmsg = 1;
+ attr.mq_msgsize = cur_max_msgsize + 1;
+ if (test_queue_fail(&attr, &result))
+ printf("Queue open with mq_msgsize > limit when euid = 99 "
+ "succeeded:\t\tFAIL\n");
+ else
+ printf("Queue open with mq_msgsize > limit when euid = 99 "
+ "failed:\t\tPASS\n");
+ attr.mq_maxmsg = 65536;
+ attr.mq_msgsize = 65536;
+ if (test_queue_fail(&attr, &result))
+ printf("Queue open with total size > 2GB when euid = 99 "
+ "succeeded:\t\tFAIL\n");
+ else
+ printf("Queue open with total size > 2GB when euid = 99 "
+ "failed:\t\t\tPASS\n");
+
+ shutdown(0,"",0);
+}
diff --git a/kernel/tools/testing/selftests/mqueue/mq_perf_tests.c b/kernel/tools/testing/selftests/mqueue/mq_perf_tests.c
new file mode 100644
index 000000000..8519e9ee9
--- /dev/null
+++ b/kernel/tools/testing/selftests/mqueue/mq_perf_tests.c
@@ -0,0 +1,742 @@
+/*
+ * This application is Copyright 2012 Red Hat, Inc.
+ * Doug Ledford <dledford@redhat.com>
+ *
+ * mq_perf_tests is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 3.
+ *
+ * mq_perf_tests is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * For the full text of the license, see <http://www.gnu.org/licenses/>.
+ *
+ * mq_perf_tests.c
+ * Tests various types of message queue workloads, concentrating on those
+ * situations that invole large message sizes, large message queue depths,
+ * or both, and reports back useful metrics about kernel message queue
+ * performance.
+ *
+ */
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <string.h>
+#include <limits.h>
+#include <errno.h>
+#include <signal.h>
+#include <pthread.h>
+#include <sched.h>
+#include <sys/types.h>
+#include <sys/time.h>
+#include <sys/resource.h>
+#include <sys/stat.h>
+#include <mqueue.h>
+#include <popt.h>
+
+static char *usage =
+"Usage:\n"
+" %s [-c #[,#..] -f] path\n"
+"\n"
+" -c # Skip most tests and go straight to a high queue depth test\n"
+" and then run that test continuously (useful for running at\n"
+" the same time as some other workload to see how much the\n"
+" cache thrashing caused by adding messages to a very deep\n"
+" queue impacts the performance of other programs). The number\n"
+" indicates which CPU core we should bind the process to during\n"
+" the run. If you have more than one physical CPU, then you\n"
+" will need one copy per physical CPU package, and you should\n"
+" specify the CPU cores to pin ourself to via a comma separated\n"
+" list of CPU values.\n"
+" -f Only usable with continuous mode. Pin ourself to the CPUs\n"
+" as requested, then instead of looping doing a high mq\n"
+" workload, just busy loop. This will allow us to lock up a\n"
+" single CPU just like we normally would, but without actually\n"
+" thrashing the CPU cache. This is to make it easier to get\n"
+" comparable numbers from some other workload running on the\n"
+" other CPUs. One set of numbers with # CPUs locked up running\n"
+" an mq workload, and another set of numbers with those same\n"
+" CPUs locked away from the test workload, but not doing\n"
+" anything to trash the cache like the mq workload might.\n"
+" path Path name of the message queue to create\n"
+"\n"
+" Note: this program must be run as root in order to enable all tests\n"
+"\n";
+
+char *MAX_MSGS = "/proc/sys/fs/mqueue/msg_max";
+char *MAX_MSGSIZE = "/proc/sys/fs/mqueue/msgsize_max";
+
+#define min(a, b) ((a) < (b) ? (a) : (b))
+#define MAX_CPUS 64
+char *cpu_option_string;
+int cpus_to_pin[MAX_CPUS];
+int num_cpus_to_pin;
+pthread_t cpu_threads[MAX_CPUS];
+pthread_t main_thread;
+cpu_set_t *cpu_set;
+int cpu_set_size;
+int cpus_online;
+
+#define MSG_SIZE 16
+#define TEST1_LOOPS 10000000
+#define TEST2_LOOPS 100000
+int continuous_mode;
+int continuous_mode_fake;
+
+struct rlimit saved_limits, cur_limits;
+int saved_max_msgs, saved_max_msgsize;
+int cur_max_msgs, cur_max_msgsize;
+FILE *max_msgs, *max_msgsize;
+int cur_nice;
+char *queue_path = "/mq_perf_tests";
+mqd_t queue = -1;
+struct mq_attr result;
+int mq_prio_max;
+
+const struct poptOption options[] = {
+ {
+ .longName = "continuous",
+ .shortName = 'c',
+ .argInfo = POPT_ARG_STRING,
+ .arg = &cpu_option_string,
+ .val = 'c',
+ .descrip = "Run continuous tests at a high queue depth in "
+ "order to test the effects of cache thrashing on "
+ "other tasks on the system. This test is intended "
+ "to be run on one core of each physical CPU while "
+ "some other CPU intensive task is run on all the other "
+ "cores of that same physical CPU and the other task "
+ "is timed. It is assumed that the process of adding "
+ "messages to the message queue in a tight loop will "
+ "impact that other task to some degree. Once the "
+ "tests are performed in this way, you should then "
+ "re-run the tests using fake mode in order to check "
+ "the difference in time required to perform the CPU "
+ "intensive task",
+ .argDescrip = "cpu[,cpu]",
+ },
+ {
+ .longName = "fake",
+ .shortName = 'f',
+ .argInfo = POPT_ARG_NONE,
+ .arg = &continuous_mode_fake,
+ .val = 0,
+ .descrip = "Tie up the CPUs that we would normally tie up in"
+ "continuous mode, but don't actually do any mq stuff, "
+ "just keep the CPU busy so it can't be used to process "
+ "system level tasks as this would free up resources on "
+ "the other CPU cores and skew the comparison between "
+ "the no-mqueue work and mqueue work tests",
+ .argDescrip = NULL,
+ },
+ {
+ .longName = "path",
+ .shortName = 'p',
+ .argInfo = POPT_ARG_STRING | POPT_ARGFLAG_SHOW_DEFAULT,
+ .arg = &queue_path,
+ .val = 'p',
+ .descrip = "The name of the path to use in the mqueue "
+ "filesystem for our tests",
+ .argDescrip = "pathname",
+ },
+ POPT_AUTOHELP
+ POPT_TABLEEND
+};
+
+static inline void __set(FILE *stream, int value, char *err_msg);
+void shutdown(int exit_val, char *err_cause, int line_no);
+void sig_action_SIGUSR1(int signum, siginfo_t *info, void *context);
+void sig_action(int signum, siginfo_t *info, void *context);
+static inline int get(FILE *stream);
+static inline void set(FILE *stream, int value);
+static inline int try_set(FILE *stream, int value);
+static inline void getr(int type, struct rlimit *rlim);
+static inline void setr(int type, struct rlimit *rlim);
+static inline void open_queue(struct mq_attr *attr);
+void increase_limits(void);
+
+static inline void __set(FILE *stream, int value, char *err_msg)
+{
+ rewind(stream);
+ if (fprintf(stream, "%d", value) < 0)
+ perror(err_msg);
+}
+
+
+void shutdown(int exit_val, char *err_cause, int line_no)
+{
+ static int in_shutdown = 0;
+ int errno_at_shutdown = errno;
+ int i;
+
+ /* In case we get called by multiple threads or from an sighandler */
+ if (in_shutdown++)
+ return;
+
+ for (i = 0; i < num_cpus_to_pin; i++)
+ if (cpu_threads[i]) {
+ pthread_kill(cpu_threads[i], SIGUSR1);
+ pthread_join(cpu_threads[i], NULL);
+ }
+
+ if (queue != -1)
+ if (mq_close(queue))
+ perror("mq_close() during shutdown");
+ if (queue_path)
+ /*
+ * Be silent if this fails, if we cleaned up already it's
+ * expected to fail
+ */
+ mq_unlink(queue_path);
+ if (saved_max_msgs)
+ __set(max_msgs, saved_max_msgs,
+ "failed to restore saved_max_msgs");
+ if (saved_max_msgsize)
+ __set(max_msgsize, saved_max_msgsize,
+ "failed to restore saved_max_msgsize");
+ if (exit_val)
+ error(exit_val, errno_at_shutdown, "%s at %d",
+ err_cause, line_no);
+ exit(0);
+}
+
+void sig_action_SIGUSR1(int signum, siginfo_t *info, void *context)
+{
+ if (pthread_self() != main_thread)
+ pthread_exit(0);
+ else {
+ fprintf(stderr, "Caught signal %d in SIGUSR1 handler, "
+ "exiting\n", signum);
+ shutdown(0, "", 0);
+ fprintf(stderr, "\n\nReturned from shutdown?!?!\n\n");
+ exit(0);
+ }
+}
+
+void sig_action(int signum, siginfo_t *info, void *context)
+{
+ if (pthread_self() != main_thread)
+ pthread_kill(main_thread, signum);
+ else {
+ fprintf(stderr, "Caught signal %d, exiting\n", signum);
+ shutdown(0, "", 0);
+ fprintf(stderr, "\n\nReturned from shutdown?!?!\n\n");
+ exit(0);
+ }
+}
+
+static inline int get(FILE *stream)
+{
+ int value;
+ rewind(stream);
+ if (fscanf(stream, "%d", &value) != 1)
+ shutdown(4, "Error reading /proc entry", __LINE__);
+ return value;
+}
+
+static inline void set(FILE *stream, int value)
+{
+ int new_value;
+
+ rewind(stream);
+ if (fprintf(stream, "%d", value) < 0)
+ return shutdown(5, "Failed writing to /proc file", __LINE__);
+ new_value = get(stream);
+ if (new_value != value)
+ return shutdown(5, "We didn't get what we wrote to /proc back",
+ __LINE__);
+}
+
+static inline int try_set(FILE *stream, int value)
+{
+ int new_value;
+
+ rewind(stream);
+ fprintf(stream, "%d", value);
+ new_value = get(stream);
+ return new_value == value;
+}
+
+static inline void getr(int type, struct rlimit *rlim)
+{
+ if (getrlimit(type, rlim))
+ shutdown(6, "getrlimit()", __LINE__);
+}
+
+static inline void setr(int type, struct rlimit *rlim)
+{
+ if (setrlimit(type, rlim))
+ shutdown(7, "setrlimit()", __LINE__);
+}
+
+/**
+ * open_queue - open the global queue for testing
+ * @attr - An attr struct specifying the desired queue traits
+ * @result - An attr struct that lists the actual traits the queue has
+ *
+ * This open is not allowed to fail, failure will result in an orderly
+ * shutdown of the program. The global queue_path is used to set what
+ * queue to open, the queue descriptor is saved in the global queue
+ * variable.
+ */
+static inline void open_queue(struct mq_attr *attr)
+{
+ int flags = O_RDWR | O_EXCL | O_CREAT | O_NONBLOCK;
+ int perms = DEFFILEMODE;
+
+ queue = mq_open(queue_path, flags, perms, attr);
+ if (queue == -1)
+ shutdown(1, "mq_open()", __LINE__);
+ if (mq_getattr(queue, &result))
+ shutdown(1, "mq_getattr()", __LINE__);
+ printf("\n\tQueue %s created:\n", queue_path);
+ printf("\t\tmq_flags:\t\t\t%s\n", result.mq_flags & O_NONBLOCK ?
+ "O_NONBLOCK" : "(null)");
+ printf("\t\tmq_maxmsg:\t\t\t%lu\n", result.mq_maxmsg);
+ printf("\t\tmq_msgsize:\t\t\t%lu\n", result.mq_msgsize);
+ printf("\t\tmq_curmsgs:\t\t\t%lu\n", result.mq_curmsgs);
+}
+
+void *fake_cont_thread(void *arg)
+{
+ int i;
+
+ for (i = 0; i < num_cpus_to_pin; i++)
+ if (cpu_threads[i] == pthread_self())
+ break;
+ printf("\tStarted fake continuous mode thread %d on CPU %d\n", i,
+ cpus_to_pin[i]);
+ while (1)
+ ;
+}
+
+void *cont_thread(void *arg)
+{
+ char buff[MSG_SIZE];
+ int i, priority;
+
+ for (i = 0; i < num_cpus_to_pin; i++)
+ if (cpu_threads[i] == pthread_self())
+ break;
+ printf("\tStarted continuous mode thread %d on CPU %d\n", i,
+ cpus_to_pin[i]);
+ while (1) {
+ while (mq_send(queue, buff, sizeof(buff), 0) == 0)
+ ;
+ mq_receive(queue, buff, sizeof(buff), &priority);
+ }
+}
+
+#define drain_queue() \
+ while (mq_receive(queue, buff, MSG_SIZE, &prio_in) == MSG_SIZE)
+
+#define do_untimed_send() \
+ do { \
+ if (mq_send(queue, buff, MSG_SIZE, prio_out)) \
+ shutdown(3, "Test send failure", __LINE__); \
+ } while (0)
+
+#define do_send_recv() \
+ do { \
+ clock_gettime(clock, &start); \
+ if (mq_send(queue, buff, MSG_SIZE, prio_out)) \
+ shutdown(3, "Test send failure", __LINE__); \
+ clock_gettime(clock, &middle); \
+ if (mq_receive(queue, buff, MSG_SIZE, &prio_in) != MSG_SIZE) \
+ shutdown(3, "Test receive failure", __LINE__); \
+ clock_gettime(clock, &end); \
+ nsec = ((middle.tv_sec - start.tv_sec) * 1000000000) + \
+ (middle.tv_nsec - start.tv_nsec); \
+ send_total.tv_nsec += nsec; \
+ if (send_total.tv_nsec >= 1000000000) { \
+ send_total.tv_sec++; \
+ send_total.tv_nsec -= 1000000000; \
+ } \
+ nsec = ((end.tv_sec - middle.tv_sec) * 1000000000) + \
+ (end.tv_nsec - middle.tv_nsec); \
+ recv_total.tv_nsec += nsec; \
+ if (recv_total.tv_nsec >= 1000000000) { \
+ recv_total.tv_sec++; \
+ recv_total.tv_nsec -= 1000000000; \
+ } \
+ } while (0)
+
+struct test {
+ char *desc;
+ void (*func)(int *);
+};
+
+void const_prio(int *prio)
+{
+ return;
+}
+
+void inc_prio(int *prio)
+{
+ if (++*prio == mq_prio_max)
+ *prio = 0;
+}
+
+void dec_prio(int *prio)
+{
+ if (--*prio < 0)
+ *prio = mq_prio_max - 1;
+}
+
+void random_prio(int *prio)
+{
+ *prio = random() % mq_prio_max;
+}
+
+struct test test2[] = {
+ {"\n\tTest #2a: Time send/recv message, queue full, constant prio\n",
+ const_prio},
+ {"\n\tTest #2b: Time send/recv message, queue full, increasing prio\n",
+ inc_prio},
+ {"\n\tTest #2c: Time send/recv message, queue full, decreasing prio\n",
+ dec_prio},
+ {"\n\tTest #2d: Time send/recv message, queue full, random prio\n",
+ random_prio},
+ {NULL, NULL}
+};
+
+/**
+ * Tests to perform (all done with MSG_SIZE messages):
+ *
+ * 1) Time to add/remove message with 0 messages on queue
+ * 1a) with constant prio
+ * 2) Time to add/remove message when queue close to capacity:
+ * 2a) with constant prio
+ * 2b) with increasing prio
+ * 2c) with decreasing prio
+ * 2d) with random prio
+ * 3) Test limits of priorities honored (double check _SC_MQ_PRIO_MAX)
+ */
+void *perf_test_thread(void *arg)
+{
+ char buff[MSG_SIZE];
+ int prio_out, prio_in;
+ int i;
+ clockid_t clock;
+ pthread_t *t;
+ struct timespec res, start, middle, end, send_total, recv_total;
+ unsigned long long nsec;
+ struct test *cur_test;
+
+ t = &cpu_threads[0];
+ printf("\n\tStarted mqueue performance test thread on CPU %d\n",
+ cpus_to_pin[0]);
+ mq_prio_max = sysconf(_SC_MQ_PRIO_MAX);
+ if (mq_prio_max == -1)
+ shutdown(2, "sysconf(_SC_MQ_PRIO_MAX)", __LINE__);
+ if (pthread_getcpuclockid(cpu_threads[0], &clock) != 0)
+ shutdown(2, "pthread_getcpuclockid", __LINE__);
+
+ if (clock_getres(clock, &res))
+ shutdown(2, "clock_getres()", __LINE__);
+
+ printf("\t\tMax priorities:\t\t\t%d\n", mq_prio_max);
+ printf("\t\tClock resolution:\t\t%lu nsec%s\n", res.tv_nsec,
+ res.tv_nsec > 1 ? "s" : "");
+
+
+
+ printf("\n\tTest #1: Time send/recv message, queue empty\n");
+ printf("\t\t(%d iterations)\n", TEST1_LOOPS);
+ prio_out = 0;
+ send_total.tv_sec = 0;
+ send_total.tv_nsec = 0;
+ recv_total.tv_sec = 0;
+ recv_total.tv_nsec = 0;
+ for (i = 0; i < TEST1_LOOPS; i++)
+ do_send_recv();
+ printf("\t\tSend msg:\t\t\t%ld.%lus total time\n",
+ send_total.tv_sec, send_total.tv_nsec);
+ nsec = ((unsigned long long)send_total.tv_sec * 1000000000 +
+ send_total.tv_nsec) / TEST1_LOOPS;
+ printf("\t\t\t\t\t\t%lld nsec/msg\n", nsec);
+ printf("\t\tRecv msg:\t\t\t%ld.%lus total time\n",
+ recv_total.tv_sec, recv_total.tv_nsec);
+ nsec = ((unsigned long long)recv_total.tv_sec * 1000000000 +
+ recv_total.tv_nsec) / TEST1_LOOPS;
+ printf("\t\t\t\t\t\t%lld nsec/msg\n", nsec);
+
+
+ for (cur_test = test2; cur_test->desc != NULL; cur_test++) {
+ printf("%s:\n", cur_test->desc);
+ printf("\t\t(%d iterations)\n", TEST2_LOOPS);
+ prio_out = 0;
+ send_total.tv_sec = 0;
+ send_total.tv_nsec = 0;
+ recv_total.tv_sec = 0;
+ recv_total.tv_nsec = 0;
+ printf("\t\tFilling queue...");
+ fflush(stdout);
+ clock_gettime(clock, &start);
+ for (i = 0; i < result.mq_maxmsg - 1; i++) {
+ do_untimed_send();
+ cur_test->func(&prio_out);
+ }
+ clock_gettime(clock, &end);
+ nsec = ((unsigned long long)(end.tv_sec - start.tv_sec) *
+ 1000000000) + (end.tv_nsec - start.tv_nsec);
+ printf("done.\t\t%lld.%llds\n", nsec / 1000000000,
+ nsec % 1000000000);
+ printf("\t\tTesting...");
+ fflush(stdout);
+ for (i = 0; i < TEST2_LOOPS; i++) {
+ do_send_recv();
+ cur_test->func(&prio_out);
+ }
+ printf("done.\n");
+ printf("\t\tSend msg:\t\t\t%ld.%lus total time\n",
+ send_total.tv_sec, send_total.tv_nsec);
+ nsec = ((unsigned long long)send_total.tv_sec * 1000000000 +
+ send_total.tv_nsec) / TEST2_LOOPS;
+ printf("\t\t\t\t\t\t%lld nsec/msg\n", nsec);
+ printf("\t\tRecv msg:\t\t\t%ld.%lus total time\n",
+ recv_total.tv_sec, recv_total.tv_nsec);
+ nsec = ((unsigned long long)recv_total.tv_sec * 1000000000 +
+ recv_total.tv_nsec) / TEST2_LOOPS;
+ printf("\t\t\t\t\t\t%lld nsec/msg\n", nsec);
+ printf("\t\tDraining queue...");
+ fflush(stdout);
+ clock_gettime(clock, &start);
+ drain_queue();
+ clock_gettime(clock, &end);
+ nsec = ((unsigned long long)(end.tv_sec - start.tv_sec) *
+ 1000000000) + (end.tv_nsec - start.tv_nsec);
+ printf("done.\t\t%lld.%llds\n", nsec / 1000000000,
+ nsec % 1000000000);
+ }
+ return 0;
+}
+
+void increase_limits(void)
+{
+ cur_limits.rlim_cur = RLIM_INFINITY;
+ cur_limits.rlim_max = RLIM_INFINITY;
+ setr(RLIMIT_MSGQUEUE, &cur_limits);
+ while (try_set(max_msgs, cur_max_msgs += 10))
+ ;
+ cur_max_msgs = get(max_msgs);
+ while (try_set(max_msgsize, cur_max_msgsize += 1024))
+ ;
+ cur_max_msgsize = get(max_msgsize);
+ if (setpriority(PRIO_PROCESS, 0, -20) != 0)
+ shutdown(2, "setpriority()", __LINE__);
+ cur_nice = -20;
+}
+
+int main(int argc, char *argv[])
+{
+ struct mq_attr attr;
+ char *option, *next_option;
+ int i, cpu, rc;
+ struct sigaction sa;
+ poptContext popt_context;
+ void *retval;
+
+ main_thread = pthread_self();
+ num_cpus_to_pin = 0;
+
+ if (sysconf(_SC_NPROCESSORS_ONLN) == -1) {
+ perror("sysconf(_SC_NPROCESSORS_ONLN)");
+ exit(1);
+ }
+ cpus_online = min(MAX_CPUS, sysconf(_SC_NPROCESSORS_ONLN));
+ cpu_set = CPU_ALLOC(cpus_online);
+ if (cpu_set == NULL) {
+ perror("CPU_ALLOC()");
+ exit(1);
+ }
+ cpu_set_size = CPU_ALLOC_SIZE(cpus_online);
+ CPU_ZERO_S(cpu_set_size, cpu_set);
+
+ popt_context = poptGetContext(NULL, argc, (const char **)argv,
+ options, 0);
+
+ while ((rc = poptGetNextOpt(popt_context)) > 0) {
+ switch (rc) {
+ case 'c':
+ continuous_mode = 1;
+ option = cpu_option_string;
+ do {
+ next_option = strchr(option, ',');
+ if (next_option)
+ *next_option = '\0';
+ cpu = atoi(option);
+ if (cpu >= cpus_online)
+ fprintf(stderr, "CPU %d exceeds "
+ "cpus online, ignoring.\n",
+ cpu);
+ else
+ cpus_to_pin[num_cpus_to_pin++] = cpu;
+ if (next_option)
+ option = ++next_option;
+ } while (next_option && num_cpus_to_pin < MAX_CPUS);
+ /* Double check that they didn't give us the same CPU
+ * more than once */
+ for (cpu = 0; cpu < num_cpus_to_pin; cpu++) {
+ if (CPU_ISSET_S(cpus_to_pin[cpu], cpu_set_size,
+ cpu_set)) {
+ fprintf(stderr, "Any given CPU may "
+ "only be given once.\n");
+ exit(1);
+ } else
+ CPU_SET_S(cpus_to_pin[cpu],
+ cpu_set_size, cpu_set);
+ }
+ break;
+ case 'p':
+ /*
+ * Although we can create a msg queue with a
+ * non-absolute path name, unlink will fail. So,
+ * if the name doesn't start with a /, add one
+ * when we save it.
+ */
+ option = queue_path;
+ if (*option != '/') {
+ queue_path = malloc(strlen(option) + 2);
+ if (!queue_path) {
+ perror("malloc()");
+ exit(1);
+ }
+ queue_path[0] = '/';
+ queue_path[1] = 0;
+ strcat(queue_path, option);
+ free(option);
+ }
+ break;
+ }
+ }
+
+ if (continuous_mode && num_cpus_to_pin == 0) {
+ fprintf(stderr, "Must pass at least one CPU to continuous "
+ "mode.\n");
+ poptPrintUsage(popt_context, stderr, 0);
+ exit(1);
+ } else if (!continuous_mode) {
+ num_cpus_to_pin = 1;
+ cpus_to_pin[0] = cpus_online - 1;
+ }
+
+ if (getuid() != 0) {
+ fprintf(stderr, "Not running as root, but almost all tests "
+ "require root in order to modify\nsystem settings. "
+ "Exiting.\n");
+ exit(1);
+ }
+
+ max_msgs = fopen(MAX_MSGS, "r+");
+ max_msgsize = fopen(MAX_MSGSIZE, "r+");
+ if (!max_msgs)
+ shutdown(2, "Failed to open msg_max", __LINE__);
+ if (!max_msgsize)
+ shutdown(2, "Failed to open msgsize_max", __LINE__);
+
+ /* Load up the current system values for everything we can */
+ getr(RLIMIT_MSGQUEUE, &saved_limits);
+ cur_limits = saved_limits;
+ saved_max_msgs = cur_max_msgs = get(max_msgs);
+ saved_max_msgsize = cur_max_msgsize = get(max_msgsize);
+ errno = 0;
+ cur_nice = getpriority(PRIO_PROCESS, 0);
+ if (errno)
+ shutdown(2, "getpriority()", __LINE__);
+
+ /* Tell the user our initial state */
+ printf("\nInitial system state:\n");
+ printf("\tUsing queue path:\t\t\t%s\n", queue_path);
+ printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t%ld\n",
+ (long) saved_limits.rlim_cur);
+ printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t%ld\n",
+ (long) saved_limits.rlim_max);
+ printf("\tMaximum Message Size:\t\t\t%d\n", saved_max_msgsize);
+ printf("\tMaximum Queue Size:\t\t\t%d\n", saved_max_msgs);
+ printf("\tNice value:\t\t\t\t%d\n", cur_nice);
+ printf("\n");
+
+ increase_limits();
+
+ printf("Adjusted system state for testing:\n");
+ if (cur_limits.rlim_cur == RLIM_INFINITY) {
+ printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t(unlimited)\n");
+ printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t(unlimited)\n");
+ } else {
+ printf("\tRLIMIT_MSGQUEUE(soft):\t\t\t%ld\n",
+ (long) cur_limits.rlim_cur);
+ printf("\tRLIMIT_MSGQUEUE(hard):\t\t\t%ld\n",
+ (long) cur_limits.rlim_max);
+ }
+ printf("\tMaximum Message Size:\t\t\t%d\n", cur_max_msgsize);
+ printf("\tMaximum Queue Size:\t\t\t%d\n", cur_max_msgs);
+ printf("\tNice value:\t\t\t\t%d\n", cur_nice);
+ printf("\tContinuous mode:\t\t\t(%s)\n", continuous_mode ?
+ (continuous_mode_fake ? "fake mode" : "enabled") :
+ "disabled");
+ printf("\tCPUs to pin:\t\t\t\t%d", cpus_to_pin[0]);
+ for (cpu = 1; cpu < num_cpus_to_pin; cpu++)
+ printf(",%d", cpus_to_pin[cpu]);
+ printf("\n");
+
+ sa.sa_sigaction = sig_action_SIGUSR1;
+ sigemptyset(&sa.sa_mask);
+ sigaddset(&sa.sa_mask, SIGHUP);
+ sigaddset(&sa.sa_mask, SIGINT);
+ sigaddset(&sa.sa_mask, SIGQUIT);
+ sigaddset(&sa.sa_mask, SIGTERM);
+ sa.sa_flags = SA_SIGINFO;
+ if (sigaction(SIGUSR1, &sa, NULL) == -1)
+ shutdown(1, "sigaction(SIGUSR1)", __LINE__);
+ sa.sa_sigaction = sig_action;
+ if (sigaction(SIGHUP, &sa, NULL) == -1)
+ shutdown(1, "sigaction(SIGHUP)", __LINE__);
+ if (sigaction(SIGINT, &sa, NULL) == -1)
+ shutdown(1, "sigaction(SIGINT)", __LINE__);
+ if (sigaction(SIGQUIT, &sa, NULL) == -1)
+ shutdown(1, "sigaction(SIGQUIT)", __LINE__);
+ if (sigaction(SIGTERM, &sa, NULL) == -1)
+ shutdown(1, "sigaction(SIGTERM)", __LINE__);
+
+ if (!continuous_mode_fake) {
+ attr.mq_flags = O_NONBLOCK;
+ attr.mq_maxmsg = cur_max_msgs;
+ attr.mq_msgsize = MSG_SIZE;
+ open_queue(&attr);
+ }
+ for (i = 0; i < num_cpus_to_pin; i++) {
+ pthread_attr_t thread_attr;
+ void *thread_func;
+
+ if (continuous_mode_fake)
+ thread_func = &fake_cont_thread;
+ else if (continuous_mode)
+ thread_func = &cont_thread;
+ else
+ thread_func = &perf_test_thread;
+
+ CPU_ZERO_S(cpu_set_size, cpu_set);
+ CPU_SET_S(cpus_to_pin[i], cpu_set_size, cpu_set);
+ pthread_attr_init(&thread_attr);
+ pthread_attr_setaffinity_np(&thread_attr, cpu_set_size,
+ cpu_set);
+ if (pthread_create(&cpu_threads[i], &thread_attr, thread_func,
+ NULL))
+ shutdown(1, "pthread_create()", __LINE__);
+ pthread_attr_destroy(&thread_attr);
+ }
+
+ if (!continuous_mode) {
+ pthread_join(cpu_threads[0], &retval);
+ shutdown((long)retval, "perf_test_thread()", __LINE__);
+ } else {
+ while (1)
+ sleep(1);
+ }
+ shutdown(0, "", 0);
+}
diff --git a/kernel/tools/testing/selftests/net/.gitignore b/kernel/tools/testing/selftests/net/.gitignore
new file mode 100644
index 000000000..00326629d
--- /dev/null
+++ b/kernel/tools/testing/selftests/net/.gitignore
@@ -0,0 +1,3 @@
+socket
+psock_fanout
+psock_tpacket
diff --git a/kernel/tools/testing/selftests/net/Makefile b/kernel/tools/testing/selftests/net/Makefile
new file mode 100644
index 000000000..fac4782c5
--- /dev/null
+++ b/kernel/tools/testing/selftests/net/Makefile
@@ -0,0 +1,19 @@
+# Makefile for net selftests
+
+CFLAGS = -Wall -O2 -g
+
+CFLAGS += -I../../../../usr/include/
+
+NET_PROGS = socket psock_fanout psock_tpacket
+
+all: $(NET_PROGS)
+%: %.c
+ $(CC) $(CFLAGS) -o $@ $^
+
+TEST_PROGS := run_netsocktests run_afpackettests test_bpf.sh
+TEST_FILES := $(NET_PROGS)
+
+include ../lib.mk
+
+clean:
+ $(RM) $(NET_PROGS)
diff --git a/kernel/tools/testing/selftests/net/psock_fanout.c b/kernel/tools/testing/selftests/net/psock_fanout.c
new file mode 100644
index 000000000..6f6733331
--- /dev/null
+++ b/kernel/tools/testing/selftests/net/psock_fanout.c
@@ -0,0 +1,312 @@
+/*
+ * Copyright 2013 Google Inc.
+ * Author: Willem de Bruijn (willemb@google.com)
+ *
+ * A basic test of packet socket fanout behavior.
+ *
+ * Control:
+ * - create fanout fails as expected with illegal flag combinations
+ * - join fanout fails as expected with diverging types or flags
+ *
+ * Datapath:
+ * Open a pair of packet sockets and a pair of INET sockets, send a known
+ * number of packets across the two INET sockets and count the number of
+ * packets enqueued onto the two packet sockets.
+ *
+ * The test currently runs for
+ * - PACKET_FANOUT_HASH
+ * - PACKET_FANOUT_HASH with PACKET_FANOUT_FLAG_ROLLOVER
+ * - PACKET_FANOUT_LB
+ * - PACKET_FANOUT_CPU
+ * - PACKET_FANOUT_ROLLOVER
+ *
+ * Todo:
+ * - functionality: PACKET_FANOUT_FLAG_DEFRAG
+ *
+ * License (GPLv2):
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#define _GNU_SOURCE /* for sched_setaffinity */
+
+#include <arpa/inet.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <linux/filter.h>
+#include <linux/if_packet.h>
+#include <net/ethernet.h>
+#include <netinet/ip.h>
+#include <netinet/udp.h>
+#include <poll.h>
+#include <sched.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+#include "psock_lib.h"
+
+#define RING_NUM_FRAMES 20
+
+/* Open a socket in a given fanout mode.
+ * @return -1 if mode is bad, a valid socket otherwise */
+static int sock_fanout_open(uint16_t typeflags, int num_packets)
+{
+ int fd, val;
+
+ fd = socket(PF_PACKET, SOCK_DGRAM, htons(ETH_P_IP));
+ if (fd < 0) {
+ perror("socket packet");
+ exit(1);
+ }
+
+ /* fanout group ID is always 0: tests whether old groups are deleted */
+ val = ((int) typeflags) << 16;
+ if (setsockopt(fd, SOL_PACKET, PACKET_FANOUT, &val, sizeof(val))) {
+ if (close(fd)) {
+ perror("close packet");
+ exit(1);
+ }
+ return -1;
+ }
+
+ pair_udp_setfilter(fd);
+ return fd;
+}
+
+static char *sock_fanout_open_ring(int fd)
+{
+ struct tpacket_req req = {
+ .tp_block_size = getpagesize(),
+ .tp_frame_size = getpagesize(),
+ .tp_block_nr = RING_NUM_FRAMES,
+ .tp_frame_nr = RING_NUM_FRAMES,
+ };
+ char *ring;
+ int val = TPACKET_V2;
+
+ if (setsockopt(fd, SOL_PACKET, PACKET_VERSION, (void *) &val,
+ sizeof(val))) {
+ perror("packetsock ring setsockopt version");
+ exit(1);
+ }
+ if (setsockopt(fd, SOL_PACKET, PACKET_RX_RING, (void *) &req,
+ sizeof(req))) {
+ perror("packetsock ring setsockopt");
+ exit(1);
+ }
+
+ ring = mmap(0, req.tp_block_size * req.tp_block_nr,
+ PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
+ if (!ring) {
+ fprintf(stderr, "packetsock ring mmap\n");
+ exit(1);
+ }
+
+ return ring;
+}
+
+static int sock_fanout_read_ring(int fd, void *ring)
+{
+ struct tpacket2_hdr *header = ring;
+ int count = 0;
+
+ while (count < RING_NUM_FRAMES && header->tp_status & TP_STATUS_USER) {
+ count++;
+ header = ring + (count * getpagesize());
+ }
+
+ return count;
+}
+
+static int sock_fanout_read(int fds[], char *rings[], const int expect[])
+{
+ int ret[2];
+
+ ret[0] = sock_fanout_read_ring(fds[0], rings[0]);
+ ret[1] = sock_fanout_read_ring(fds[1], rings[1]);
+
+ fprintf(stderr, "info: count=%d,%d, expect=%d,%d\n",
+ ret[0], ret[1], expect[0], expect[1]);
+
+ if ((!(ret[0] == expect[0] && ret[1] == expect[1])) &&
+ (!(ret[0] == expect[1] && ret[1] == expect[0]))) {
+ fprintf(stderr, "ERROR: incorrect queue lengths\n");
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Test illegal mode + flag combination */
+static void test_control_single(void)
+{
+ fprintf(stderr, "test: control single socket\n");
+
+ if (sock_fanout_open(PACKET_FANOUT_ROLLOVER |
+ PACKET_FANOUT_FLAG_ROLLOVER, 0) != -1) {
+ fprintf(stderr, "ERROR: opened socket with dual rollover\n");
+ exit(1);
+ }
+}
+
+/* Test illegal group with different modes or flags */
+static void test_control_group(void)
+{
+ int fds[2];
+
+ fprintf(stderr, "test: control multiple sockets\n");
+
+ fds[0] = sock_fanout_open(PACKET_FANOUT_HASH, 20);
+ if (fds[0] == -1) {
+ fprintf(stderr, "ERROR: failed to open HASH socket\n");
+ exit(1);
+ }
+ if (sock_fanout_open(PACKET_FANOUT_HASH |
+ PACKET_FANOUT_FLAG_DEFRAG, 10) != -1) {
+ fprintf(stderr, "ERROR: joined group with wrong flag defrag\n");
+ exit(1);
+ }
+ if (sock_fanout_open(PACKET_FANOUT_HASH |
+ PACKET_FANOUT_FLAG_ROLLOVER, 10) != -1) {
+ fprintf(stderr, "ERROR: joined group with wrong flag ro\n");
+ exit(1);
+ }
+ if (sock_fanout_open(PACKET_FANOUT_CPU, 10) != -1) {
+ fprintf(stderr, "ERROR: joined group with wrong mode\n");
+ exit(1);
+ }
+ fds[1] = sock_fanout_open(PACKET_FANOUT_HASH, 20);
+ if (fds[1] == -1) {
+ fprintf(stderr, "ERROR: failed to join group\n");
+ exit(1);
+ }
+ if (close(fds[1]) || close(fds[0])) {
+ fprintf(stderr, "ERROR: closing sockets\n");
+ exit(1);
+ }
+}
+
+static int test_datapath(uint16_t typeflags, int port_off,
+ const int expect1[], const int expect2[])
+{
+ const int expect0[] = { 0, 0 };
+ char *rings[2];
+ int fds[2], fds_udp[2][2], ret;
+
+ fprintf(stderr, "test: datapath 0x%hx\n", typeflags);
+
+ fds[0] = sock_fanout_open(typeflags, 20);
+ fds[1] = sock_fanout_open(typeflags, 20);
+ if (fds[0] == -1 || fds[1] == -1) {
+ fprintf(stderr, "ERROR: failed open\n");
+ exit(1);
+ }
+ rings[0] = sock_fanout_open_ring(fds[0]);
+ rings[1] = sock_fanout_open_ring(fds[1]);
+ pair_udp_open(fds_udp[0], PORT_BASE);
+ pair_udp_open(fds_udp[1], PORT_BASE + port_off);
+ sock_fanout_read(fds, rings, expect0);
+
+ /* Send data, but not enough to overflow a queue */
+ pair_udp_send(fds_udp[0], 15);
+ pair_udp_send(fds_udp[1], 5);
+ ret = sock_fanout_read(fds, rings, expect1);
+
+ /* Send more data, overflow the queue */
+ pair_udp_send(fds_udp[0], 15);
+ /* TODO: ensure consistent order between expect1 and expect2 */
+ ret |= sock_fanout_read(fds, rings, expect2);
+
+ if (munmap(rings[1], RING_NUM_FRAMES * getpagesize()) ||
+ munmap(rings[0], RING_NUM_FRAMES * getpagesize())) {
+ fprintf(stderr, "close rings\n");
+ exit(1);
+ }
+ if (close(fds_udp[1][1]) || close(fds_udp[1][0]) ||
+ close(fds_udp[0][1]) || close(fds_udp[0][0]) ||
+ close(fds[1]) || close(fds[0])) {
+ fprintf(stderr, "close datapath\n");
+ exit(1);
+ }
+
+ return ret;
+}
+
+static int set_cpuaffinity(int cpuid)
+{
+ cpu_set_t mask;
+
+ CPU_ZERO(&mask);
+ CPU_SET(cpuid, &mask);
+ if (sched_setaffinity(0, sizeof(mask), &mask)) {
+ if (errno != EINVAL) {
+ fprintf(stderr, "setaffinity %d\n", cpuid);
+ exit(1);
+ }
+ return 1;
+ }
+
+ return 0;
+}
+
+int main(int argc, char **argv)
+{
+ const int expect_hash[2][2] = { { 15, 5 }, { 20, 5 } };
+ const int expect_hash_rb[2][2] = { { 15, 5 }, { 20, 15 } };
+ const int expect_lb[2][2] = { { 10, 10 }, { 18, 17 } };
+ const int expect_rb[2][2] = { { 20, 0 }, { 20, 15 } };
+ const int expect_cpu0[2][2] = { { 20, 0 }, { 20, 0 } };
+ const int expect_cpu1[2][2] = { { 0, 20 }, { 0, 20 } };
+ int port_off = 2, tries = 5, ret;
+
+ test_control_single();
+ test_control_group();
+
+ /* find a set of ports that do not collide onto the same socket */
+ ret = test_datapath(PACKET_FANOUT_HASH, port_off,
+ expect_hash[0], expect_hash[1]);
+ while (ret && tries--) {
+ fprintf(stderr, "info: trying alternate ports (%d)\n", tries);
+ ret = test_datapath(PACKET_FANOUT_HASH, ++port_off,
+ expect_hash[0], expect_hash[1]);
+ }
+
+ ret |= test_datapath(PACKET_FANOUT_HASH | PACKET_FANOUT_FLAG_ROLLOVER,
+ port_off, expect_hash_rb[0], expect_hash_rb[1]);
+ ret |= test_datapath(PACKET_FANOUT_LB,
+ port_off, expect_lb[0], expect_lb[1]);
+ ret |= test_datapath(PACKET_FANOUT_ROLLOVER,
+ port_off, expect_rb[0], expect_rb[1]);
+
+ set_cpuaffinity(0);
+ ret |= test_datapath(PACKET_FANOUT_CPU, port_off,
+ expect_cpu0[0], expect_cpu0[1]);
+ if (!set_cpuaffinity(1))
+ /* TODO: test that choice alternates with previous */
+ ret |= test_datapath(PACKET_FANOUT_CPU, port_off,
+ expect_cpu1[0], expect_cpu1[1]);
+
+ if (ret)
+ return 1;
+
+ printf("OK. All tests passed\n");
+ return 0;
+}
diff --git a/kernel/tools/testing/selftests/net/psock_lib.h b/kernel/tools/testing/selftests/net/psock_lib.h
new file mode 100644
index 000000000..37da54ac8
--- /dev/null
+++ b/kernel/tools/testing/selftests/net/psock_lib.h
@@ -0,0 +1,127 @@
+/*
+ * Copyright 2013 Google Inc.
+ * Author: Willem de Bruijn <willemb@google.com>
+ * Daniel Borkmann <dborkman@redhat.com>
+ *
+ * License (GPLv2):
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef PSOCK_LIB_H
+#define PSOCK_LIB_H
+
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <string.h>
+#include <arpa/inet.h>
+#include <unistd.h>
+
+#define DATA_LEN 100
+#define DATA_CHAR 'a'
+
+#define PORT_BASE 8000
+
+#ifndef __maybe_unused
+# define __maybe_unused __attribute__ ((__unused__))
+#endif
+
+static __maybe_unused void pair_udp_setfilter(int fd)
+{
+ struct sock_filter bpf_filter[] = {
+ { 0x80, 0, 0, 0x00000000 }, /* LD pktlen */
+ { 0x35, 0, 5, DATA_LEN }, /* JGE DATA_LEN [f goto nomatch]*/
+ { 0x30, 0, 0, 0x00000050 }, /* LD ip[80] */
+ { 0x15, 0, 3, DATA_CHAR }, /* JEQ DATA_CHAR [f goto nomatch]*/
+ { 0x30, 0, 0, 0x00000051 }, /* LD ip[81] */
+ { 0x15, 0, 1, DATA_CHAR }, /* JEQ DATA_CHAR [f goto nomatch]*/
+ { 0x06, 0, 0, 0x00000060 }, /* RET match */
+ { 0x06, 0, 0, 0x00000000 }, /* RET no match */
+ };
+ struct sock_fprog bpf_prog;
+
+ bpf_prog.filter = bpf_filter;
+ bpf_prog.len = sizeof(bpf_filter) / sizeof(struct sock_filter);
+ if (setsockopt(fd, SOL_SOCKET, SO_ATTACH_FILTER, &bpf_prog,
+ sizeof(bpf_prog))) {
+ perror("setsockopt SO_ATTACH_FILTER");
+ exit(1);
+ }
+}
+
+static __maybe_unused void pair_udp_open(int fds[], uint16_t port)
+{
+ struct sockaddr_in saddr, daddr;
+
+ fds[0] = socket(PF_INET, SOCK_DGRAM, 0);
+ fds[1] = socket(PF_INET, SOCK_DGRAM, 0);
+ if (fds[0] == -1 || fds[1] == -1) {
+ fprintf(stderr, "ERROR: socket dgram\n");
+ exit(1);
+ }
+
+ memset(&saddr, 0, sizeof(saddr));
+ saddr.sin_family = AF_INET;
+ saddr.sin_port = htons(port);
+ saddr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+
+ memset(&daddr, 0, sizeof(daddr));
+ daddr.sin_family = AF_INET;
+ daddr.sin_port = htons(port + 1);
+ daddr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+
+ /* must bind both to get consistent hash result */
+ if (bind(fds[1], (void *) &daddr, sizeof(daddr))) {
+ perror("bind");
+ exit(1);
+ }
+ if (bind(fds[0], (void *) &saddr, sizeof(saddr))) {
+ perror("bind");
+ exit(1);
+ }
+ if (connect(fds[0], (void *) &daddr, sizeof(daddr))) {
+ perror("connect");
+ exit(1);
+ }
+}
+
+static __maybe_unused void pair_udp_send(int fds[], int num)
+{
+ char buf[DATA_LEN], rbuf[DATA_LEN];
+
+ memset(buf, DATA_CHAR, sizeof(buf));
+ while (num--) {
+ /* Should really handle EINTR and EAGAIN */
+ if (write(fds[0], buf, sizeof(buf)) != sizeof(buf)) {
+ fprintf(stderr, "ERROR: send failed left=%d\n", num);
+ exit(1);
+ }
+ if (read(fds[1], rbuf, sizeof(rbuf)) != sizeof(rbuf)) {
+ fprintf(stderr, "ERROR: recv failed left=%d\n", num);
+ exit(1);
+ }
+ if (memcmp(buf, rbuf, sizeof(buf))) {
+ fprintf(stderr, "ERROR: data failed left=%d\n", num);
+ exit(1);
+ }
+ }
+}
+
+static __maybe_unused void pair_udp_close(int fds[])
+{
+ close(fds[0]);
+ close(fds[1]);
+}
+
+#endif /* PSOCK_LIB_H */
diff --git a/kernel/tools/testing/selftests/net/psock_tpacket.c b/kernel/tools/testing/selftests/net/psock_tpacket.c
new file mode 100644
index 000000000..24adf709b
--- /dev/null
+++ b/kernel/tools/testing/selftests/net/psock_tpacket.c
@@ -0,0 +1,805 @@
+/*
+ * Copyright 2013 Red Hat, Inc.
+ * Author: Daniel Borkmann <dborkman@redhat.com>
+ * Chetan Loke <loke.chetan@gmail.com> (TPACKET_V3 usage example)
+ *
+ * A basic test of packet socket's TPACKET_V1/TPACKET_V2/TPACKET_V3 behavior.
+ *
+ * Control:
+ * Test the setup of the TPACKET socket with different patterns that are
+ * known to fail (TODO) resp. succeed (OK).
+ *
+ * Datapath:
+ * Open a pair of packet sockets and send resp. receive an a priori known
+ * packet pattern accross the sockets and check if it was received resp.
+ * sent correctly. Fanout in combination with RX_RING is currently not
+ * tested here.
+ *
+ * The test currently runs for
+ * - TPACKET_V1: RX_RING, TX_RING
+ * - TPACKET_V2: RX_RING, TX_RING
+ * - TPACKET_V3: RX_RING
+ *
+ * License (GPLv2):
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. * See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/socket.h>
+#include <sys/mman.h>
+#include <linux/if_packet.h>
+#include <linux/filter.h>
+#include <ctype.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <bits/wordsize.h>
+#include <net/ethernet.h>
+#include <netinet/ip.h>
+#include <arpa/inet.h>
+#include <stdint.h>
+#include <string.h>
+#include <assert.h>
+#include <net/if.h>
+#include <inttypes.h>
+#include <poll.h>
+
+#include "psock_lib.h"
+
+#ifndef bug_on
+# define bug_on(cond) assert(!(cond))
+#endif
+
+#ifndef __aligned_tpacket
+# define __aligned_tpacket __attribute__((aligned(TPACKET_ALIGNMENT)))
+#endif
+
+#ifndef __align_tpacket
+# define __align_tpacket(x) __attribute__((aligned(TPACKET_ALIGN(x))))
+#endif
+
+#define NUM_PACKETS 100
+#define ALIGN_8(x) (((x) + 8 - 1) & ~(8 - 1))
+
+struct ring {
+ struct iovec *rd;
+ uint8_t *mm_space;
+ size_t mm_len, rd_len;
+ struct sockaddr_ll ll;
+ void (*walk)(int sock, struct ring *ring);
+ int type, rd_num, flen, version;
+ union {
+ struct tpacket_req req;
+ struct tpacket_req3 req3;
+ };
+};
+
+struct block_desc {
+ uint32_t version;
+ uint32_t offset_to_priv;
+ struct tpacket_hdr_v1 h1;
+};
+
+union frame_map {
+ struct {
+ struct tpacket_hdr tp_h __aligned_tpacket;
+ struct sockaddr_ll s_ll __align_tpacket(sizeof(struct tpacket_hdr));
+ } *v1;
+ struct {
+ struct tpacket2_hdr tp_h __aligned_tpacket;
+ struct sockaddr_ll s_ll __align_tpacket(sizeof(struct tpacket2_hdr));
+ } *v2;
+ void *raw;
+};
+
+static unsigned int total_packets, total_bytes;
+
+static int pfsocket(int ver)
+{
+ int ret, sock = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
+ if (sock == -1) {
+ perror("socket");
+ exit(1);
+ }
+
+ ret = setsockopt(sock, SOL_PACKET, PACKET_VERSION, &ver, sizeof(ver));
+ if (ret == -1) {
+ perror("setsockopt");
+ exit(1);
+ }
+
+ return sock;
+}
+
+static void status_bar_update(void)
+{
+ if (total_packets % 10 == 0) {
+ fprintf(stderr, ".");
+ fflush(stderr);
+ }
+}
+
+static void test_payload(void *pay, size_t len)
+{
+ struct ethhdr *eth = pay;
+
+ if (len < sizeof(struct ethhdr)) {
+ fprintf(stderr, "test_payload: packet too "
+ "small: %zu bytes!\n", len);
+ exit(1);
+ }
+
+ if (eth->h_proto != htons(ETH_P_IP)) {
+ fprintf(stderr, "test_payload: wrong ethernet "
+ "type: 0x%x!\n", ntohs(eth->h_proto));
+ exit(1);
+ }
+}
+
+static void create_payload(void *pay, size_t *len)
+{
+ int i;
+ struct ethhdr *eth = pay;
+ struct iphdr *ip = pay + sizeof(*eth);
+
+ /* Lets create some broken crap, that still passes
+ * our BPF filter.
+ */
+
+ *len = DATA_LEN + 42;
+
+ memset(pay, 0xff, ETH_ALEN * 2);
+ eth->h_proto = htons(ETH_P_IP);
+
+ for (i = 0; i < sizeof(*ip); ++i)
+ ((uint8_t *) pay)[i + sizeof(*eth)] = (uint8_t) rand();
+
+ ip->ihl = 5;
+ ip->version = 4;
+ ip->protocol = 0x11;
+ ip->frag_off = 0;
+ ip->ttl = 64;
+ ip->tot_len = htons((uint16_t) *len - sizeof(*eth));
+
+ ip->saddr = htonl(INADDR_LOOPBACK);
+ ip->daddr = htonl(INADDR_LOOPBACK);
+
+ memset(pay + sizeof(*eth) + sizeof(*ip),
+ DATA_CHAR, DATA_LEN);
+}
+
+static inline int __v1_rx_kernel_ready(struct tpacket_hdr *hdr)
+{
+ return ((hdr->tp_status & TP_STATUS_USER) == TP_STATUS_USER);
+}
+
+static inline void __v1_rx_user_ready(struct tpacket_hdr *hdr)
+{
+ hdr->tp_status = TP_STATUS_KERNEL;
+ __sync_synchronize();
+}
+
+static inline int __v2_rx_kernel_ready(struct tpacket2_hdr *hdr)
+{
+ return ((hdr->tp_status & TP_STATUS_USER) == TP_STATUS_USER);
+}
+
+static inline void __v2_rx_user_ready(struct tpacket2_hdr *hdr)
+{
+ hdr->tp_status = TP_STATUS_KERNEL;
+ __sync_synchronize();
+}
+
+static inline int __v1_v2_rx_kernel_ready(void *base, int version)
+{
+ switch (version) {
+ case TPACKET_V1:
+ return __v1_rx_kernel_ready(base);
+ case TPACKET_V2:
+ return __v2_rx_kernel_ready(base);
+ default:
+ bug_on(1);
+ return 0;
+ }
+}
+
+static inline void __v1_v2_rx_user_ready(void *base, int version)
+{
+ switch (version) {
+ case TPACKET_V1:
+ __v1_rx_user_ready(base);
+ break;
+ case TPACKET_V2:
+ __v2_rx_user_ready(base);
+ break;
+ }
+}
+
+static void walk_v1_v2_rx(int sock, struct ring *ring)
+{
+ struct pollfd pfd;
+ int udp_sock[2];
+ union frame_map ppd;
+ unsigned int frame_num = 0;
+
+ bug_on(ring->type != PACKET_RX_RING);
+
+ pair_udp_open(udp_sock, PORT_BASE);
+ pair_udp_setfilter(sock);
+
+ memset(&pfd, 0, sizeof(pfd));
+ pfd.fd = sock;
+ pfd.events = POLLIN | POLLERR;
+ pfd.revents = 0;
+
+ pair_udp_send(udp_sock, NUM_PACKETS);
+
+ while (total_packets < NUM_PACKETS * 2) {
+ while (__v1_v2_rx_kernel_ready(ring->rd[frame_num].iov_base,
+ ring->version)) {
+ ppd.raw = ring->rd[frame_num].iov_base;
+
+ switch (ring->version) {
+ case TPACKET_V1:
+ test_payload((uint8_t *) ppd.raw + ppd.v1->tp_h.tp_mac,
+ ppd.v1->tp_h.tp_snaplen);
+ total_bytes += ppd.v1->tp_h.tp_snaplen;
+ break;
+
+ case TPACKET_V2:
+ test_payload((uint8_t *) ppd.raw + ppd.v2->tp_h.tp_mac,
+ ppd.v2->tp_h.tp_snaplen);
+ total_bytes += ppd.v2->tp_h.tp_snaplen;
+ break;
+ }
+
+ status_bar_update();
+ total_packets++;
+
+ __v1_v2_rx_user_ready(ppd.raw, ring->version);
+
+ frame_num = (frame_num + 1) % ring->rd_num;
+ }
+
+ poll(&pfd, 1, 1);
+ }
+
+ pair_udp_close(udp_sock);
+
+ if (total_packets != 2 * NUM_PACKETS) {
+ fprintf(stderr, "walk_v%d_rx: received %u out of %u pkts\n",
+ ring->version, total_packets, NUM_PACKETS);
+ exit(1);
+ }
+
+ fprintf(stderr, " %u pkts (%u bytes)", NUM_PACKETS, total_bytes >> 1);
+}
+
+static inline int __v1_tx_kernel_ready(struct tpacket_hdr *hdr)
+{
+ return !(hdr->tp_status & (TP_STATUS_SEND_REQUEST | TP_STATUS_SENDING));
+}
+
+static inline void __v1_tx_user_ready(struct tpacket_hdr *hdr)
+{
+ hdr->tp_status = TP_STATUS_SEND_REQUEST;
+ __sync_synchronize();
+}
+
+static inline int __v2_tx_kernel_ready(struct tpacket2_hdr *hdr)
+{
+ return !(hdr->tp_status & (TP_STATUS_SEND_REQUEST | TP_STATUS_SENDING));
+}
+
+static inline void __v2_tx_user_ready(struct tpacket2_hdr *hdr)
+{
+ hdr->tp_status = TP_STATUS_SEND_REQUEST;
+ __sync_synchronize();
+}
+
+static inline int __v1_v2_tx_kernel_ready(void *base, int version)
+{
+ switch (version) {
+ case TPACKET_V1:
+ return __v1_tx_kernel_ready(base);
+ case TPACKET_V2:
+ return __v2_tx_kernel_ready(base);
+ default:
+ bug_on(1);
+ return 0;
+ }
+}
+
+static inline void __v1_v2_tx_user_ready(void *base, int version)
+{
+ switch (version) {
+ case TPACKET_V1:
+ __v1_tx_user_ready(base);
+ break;
+ case TPACKET_V2:
+ __v2_tx_user_ready(base);
+ break;
+ }
+}
+
+static void __v1_v2_set_packet_loss_discard(int sock)
+{
+ int ret, discard = 1;
+
+ ret = setsockopt(sock, SOL_PACKET, PACKET_LOSS, (void *) &discard,
+ sizeof(discard));
+ if (ret == -1) {
+ perror("setsockopt");
+ exit(1);
+ }
+}
+
+static void walk_v1_v2_tx(int sock, struct ring *ring)
+{
+ struct pollfd pfd;
+ int rcv_sock, ret;
+ size_t packet_len;
+ union frame_map ppd;
+ char packet[1024];
+ unsigned int frame_num = 0, got = 0;
+ struct sockaddr_ll ll = {
+ .sll_family = PF_PACKET,
+ .sll_halen = ETH_ALEN,
+ };
+
+ bug_on(ring->type != PACKET_TX_RING);
+ bug_on(ring->rd_num < NUM_PACKETS);
+
+ rcv_sock = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
+ if (rcv_sock == -1) {
+ perror("socket");
+ exit(1);
+ }
+
+ pair_udp_setfilter(rcv_sock);
+
+ ll.sll_ifindex = if_nametoindex("lo");
+ ret = bind(rcv_sock, (struct sockaddr *) &ll, sizeof(ll));
+ if (ret == -1) {
+ perror("bind");
+ exit(1);
+ }
+
+ memset(&pfd, 0, sizeof(pfd));
+ pfd.fd = sock;
+ pfd.events = POLLOUT | POLLERR;
+ pfd.revents = 0;
+
+ total_packets = NUM_PACKETS;
+ create_payload(packet, &packet_len);
+
+ while (total_packets > 0) {
+ while (__v1_v2_tx_kernel_ready(ring->rd[frame_num].iov_base,
+ ring->version) &&
+ total_packets > 0) {
+ ppd.raw = ring->rd[frame_num].iov_base;
+
+ switch (ring->version) {
+ case TPACKET_V1:
+ ppd.v1->tp_h.tp_snaplen = packet_len;
+ ppd.v1->tp_h.tp_len = packet_len;
+
+ memcpy((uint8_t *) ppd.raw + TPACKET_HDRLEN -
+ sizeof(struct sockaddr_ll), packet,
+ packet_len);
+ total_bytes += ppd.v1->tp_h.tp_snaplen;
+ break;
+
+ case TPACKET_V2:
+ ppd.v2->tp_h.tp_snaplen = packet_len;
+ ppd.v2->tp_h.tp_len = packet_len;
+
+ memcpy((uint8_t *) ppd.raw + TPACKET2_HDRLEN -
+ sizeof(struct sockaddr_ll), packet,
+ packet_len);
+ total_bytes += ppd.v2->tp_h.tp_snaplen;
+ break;
+ }
+
+ status_bar_update();
+ total_packets--;
+
+ __v1_v2_tx_user_ready(ppd.raw, ring->version);
+
+ frame_num = (frame_num + 1) % ring->rd_num;
+ }
+
+ poll(&pfd, 1, 1);
+ }
+
+ bug_on(total_packets != 0);
+
+ ret = sendto(sock, NULL, 0, 0, NULL, 0);
+ if (ret == -1) {
+ perror("sendto");
+ exit(1);
+ }
+
+ while ((ret = recvfrom(rcv_sock, packet, sizeof(packet),
+ 0, NULL, NULL)) > 0 &&
+ total_packets < NUM_PACKETS) {
+ got += ret;
+ test_payload(packet, ret);
+
+ status_bar_update();
+ total_packets++;
+ }
+
+ close(rcv_sock);
+
+ if (total_packets != NUM_PACKETS) {
+ fprintf(stderr, "walk_v%d_rx: received %u out of %u pkts\n",
+ ring->version, total_packets, NUM_PACKETS);
+ exit(1);
+ }
+
+ fprintf(stderr, " %u pkts (%u bytes)", NUM_PACKETS, got);
+}
+
+static void walk_v1_v2(int sock, struct ring *ring)
+{
+ if (ring->type == PACKET_RX_RING)
+ walk_v1_v2_rx(sock, ring);
+ else
+ walk_v1_v2_tx(sock, ring);
+}
+
+static uint64_t __v3_prev_block_seq_num = 0;
+
+void __v3_test_block_seq_num(struct block_desc *pbd)
+{
+ if (__v3_prev_block_seq_num + 1 != pbd->h1.seq_num) {
+ fprintf(stderr, "\nprev_block_seq_num:%"PRIu64", expected "
+ "seq:%"PRIu64" != actual seq:%"PRIu64"\n",
+ __v3_prev_block_seq_num, __v3_prev_block_seq_num + 1,
+ (uint64_t) pbd->h1.seq_num);
+ exit(1);
+ }
+
+ __v3_prev_block_seq_num = pbd->h1.seq_num;
+}
+
+static void __v3_test_block_len(struct block_desc *pbd, uint32_t bytes, int block_num)
+{
+ if (pbd->h1.num_pkts && bytes != pbd->h1.blk_len) {
+ fprintf(stderr, "\nblock:%u with %upackets, expected "
+ "len:%u != actual len:%u\n", block_num,
+ pbd->h1.num_pkts, bytes, pbd->h1.blk_len);
+ exit(1);
+ }
+}
+
+static void __v3_test_block_header(struct block_desc *pbd, const int block_num)
+{
+ if ((pbd->h1.block_status & TP_STATUS_USER) == 0) {
+ fprintf(stderr, "\nblock %u: not in TP_STATUS_USER\n", block_num);
+ exit(1);
+ }
+
+ __v3_test_block_seq_num(pbd);
+}
+
+static void __v3_walk_block(struct block_desc *pbd, const int block_num)
+{
+ int num_pkts = pbd->h1.num_pkts, i;
+ unsigned long bytes = 0, bytes_with_padding = ALIGN_8(sizeof(*pbd));
+ struct tpacket3_hdr *ppd;
+
+ __v3_test_block_header(pbd, block_num);
+
+ ppd = (struct tpacket3_hdr *) ((uint8_t *) pbd +
+ pbd->h1.offset_to_first_pkt);
+
+ for (i = 0; i < num_pkts; ++i) {
+ bytes += ppd->tp_snaplen;
+
+ if (ppd->tp_next_offset)
+ bytes_with_padding += ppd->tp_next_offset;
+ else
+ bytes_with_padding += ALIGN_8(ppd->tp_snaplen + ppd->tp_mac);
+
+ test_payload((uint8_t *) ppd + ppd->tp_mac, ppd->tp_snaplen);
+
+ status_bar_update();
+ total_packets++;
+
+ ppd = (struct tpacket3_hdr *) ((uint8_t *) ppd + ppd->tp_next_offset);
+ __sync_synchronize();
+ }
+
+ __v3_test_block_len(pbd, bytes_with_padding, block_num);
+ total_bytes += bytes;
+}
+
+void __v3_flush_block(struct block_desc *pbd)
+{
+ pbd->h1.block_status = TP_STATUS_KERNEL;
+ __sync_synchronize();
+}
+
+static void walk_v3_rx(int sock, struct ring *ring)
+{
+ unsigned int block_num = 0;
+ struct pollfd pfd;
+ struct block_desc *pbd;
+ int udp_sock[2];
+
+ bug_on(ring->type != PACKET_RX_RING);
+
+ pair_udp_open(udp_sock, PORT_BASE);
+ pair_udp_setfilter(sock);
+
+ memset(&pfd, 0, sizeof(pfd));
+ pfd.fd = sock;
+ pfd.events = POLLIN | POLLERR;
+ pfd.revents = 0;
+
+ pair_udp_send(udp_sock, NUM_PACKETS);
+
+ while (total_packets < NUM_PACKETS * 2) {
+ pbd = (struct block_desc *) ring->rd[block_num].iov_base;
+
+ while ((pbd->h1.block_status & TP_STATUS_USER) == 0)
+ poll(&pfd, 1, 1);
+
+ __v3_walk_block(pbd, block_num);
+ __v3_flush_block(pbd);
+
+ block_num = (block_num + 1) % ring->rd_num;
+ }
+
+ pair_udp_close(udp_sock);
+
+ if (total_packets != 2 * NUM_PACKETS) {
+ fprintf(stderr, "walk_v3_rx: received %u out of %u pkts\n",
+ total_packets, NUM_PACKETS);
+ exit(1);
+ }
+
+ fprintf(stderr, " %u pkts (%u bytes)", NUM_PACKETS, total_bytes >> 1);
+}
+
+static void walk_v3(int sock, struct ring *ring)
+{
+ if (ring->type == PACKET_RX_RING)
+ walk_v3_rx(sock, ring);
+ else
+ bug_on(1);
+}
+
+static void __v1_v2_fill(struct ring *ring, unsigned int blocks)
+{
+ ring->req.tp_block_size = getpagesize() << 2;
+ ring->req.tp_frame_size = TPACKET_ALIGNMENT << 7;
+ ring->req.tp_block_nr = blocks;
+
+ ring->req.tp_frame_nr = ring->req.tp_block_size /
+ ring->req.tp_frame_size *
+ ring->req.tp_block_nr;
+
+ ring->mm_len = ring->req.tp_block_size * ring->req.tp_block_nr;
+ ring->walk = walk_v1_v2;
+ ring->rd_num = ring->req.tp_frame_nr;
+ ring->flen = ring->req.tp_frame_size;
+}
+
+static void __v3_fill(struct ring *ring, unsigned int blocks)
+{
+ ring->req3.tp_retire_blk_tov = 64;
+ ring->req3.tp_sizeof_priv = 0;
+ ring->req3.tp_feature_req_word = TP_FT_REQ_FILL_RXHASH;
+
+ ring->req3.tp_block_size = getpagesize() << 2;
+ ring->req3.tp_frame_size = TPACKET_ALIGNMENT << 7;
+ ring->req3.tp_block_nr = blocks;
+
+ ring->req3.tp_frame_nr = ring->req3.tp_block_size /
+ ring->req3.tp_frame_size *
+ ring->req3.tp_block_nr;
+
+ ring->mm_len = ring->req3.tp_block_size * ring->req3.tp_block_nr;
+ ring->walk = walk_v3;
+ ring->rd_num = ring->req3.tp_block_nr;
+ ring->flen = ring->req3.tp_block_size;
+}
+
+static void setup_ring(int sock, struct ring *ring, int version, int type)
+{
+ int ret = 0;
+ unsigned int blocks = 256;
+
+ ring->type = type;
+ ring->version = version;
+
+ switch (version) {
+ case TPACKET_V1:
+ case TPACKET_V2:
+ if (type == PACKET_TX_RING)
+ __v1_v2_set_packet_loss_discard(sock);
+ __v1_v2_fill(ring, blocks);
+ ret = setsockopt(sock, SOL_PACKET, type, &ring->req,
+ sizeof(ring->req));
+ break;
+
+ case TPACKET_V3:
+ __v3_fill(ring, blocks);
+ ret = setsockopt(sock, SOL_PACKET, type, &ring->req3,
+ sizeof(ring->req3));
+ break;
+ }
+
+ if (ret == -1) {
+ perror("setsockopt");
+ exit(1);
+ }
+
+ ring->rd_len = ring->rd_num * sizeof(*ring->rd);
+ ring->rd = malloc(ring->rd_len);
+ if (ring->rd == NULL) {
+ perror("malloc");
+ exit(1);
+ }
+
+ total_packets = 0;
+ total_bytes = 0;
+}
+
+static void mmap_ring(int sock, struct ring *ring)
+{
+ int i;
+
+ ring->mm_space = mmap(0, ring->mm_len, PROT_READ | PROT_WRITE,
+ MAP_SHARED | MAP_LOCKED | MAP_POPULATE, sock, 0);
+ if (ring->mm_space == MAP_FAILED) {
+ perror("mmap");
+ exit(1);
+ }
+
+ memset(ring->rd, 0, ring->rd_len);
+ for (i = 0; i < ring->rd_num; ++i) {
+ ring->rd[i].iov_base = ring->mm_space + (i * ring->flen);
+ ring->rd[i].iov_len = ring->flen;
+ }
+}
+
+static void bind_ring(int sock, struct ring *ring)
+{
+ int ret;
+
+ ring->ll.sll_family = PF_PACKET;
+ ring->ll.sll_protocol = htons(ETH_P_ALL);
+ ring->ll.sll_ifindex = if_nametoindex("lo");
+ ring->ll.sll_hatype = 0;
+ ring->ll.sll_pkttype = 0;
+ ring->ll.sll_halen = 0;
+
+ ret = bind(sock, (struct sockaddr *) &ring->ll, sizeof(ring->ll));
+ if (ret == -1) {
+ perror("bind");
+ exit(1);
+ }
+}
+
+static void walk_ring(int sock, struct ring *ring)
+{
+ ring->walk(sock, ring);
+}
+
+static void unmap_ring(int sock, struct ring *ring)
+{
+ munmap(ring->mm_space, ring->mm_len);
+ free(ring->rd);
+}
+
+static int test_kernel_bit_width(void)
+{
+ char in[512], *ptr;
+ int num = 0, fd;
+ ssize_t ret;
+
+ fd = open("/proc/kallsyms", O_RDONLY);
+ if (fd == -1) {
+ perror("open");
+ exit(1);
+ }
+
+ ret = read(fd, in, sizeof(in));
+ if (ret <= 0) {
+ perror("read");
+ exit(1);
+ }
+
+ close(fd);
+
+ ptr = in;
+ while(!isspace(*ptr)) {
+ num++;
+ ptr++;
+ }
+
+ return num * 4;
+}
+
+static int test_user_bit_width(void)
+{
+ return __WORDSIZE;
+}
+
+static const char *tpacket_str[] = {
+ [TPACKET_V1] = "TPACKET_V1",
+ [TPACKET_V2] = "TPACKET_V2",
+ [TPACKET_V3] = "TPACKET_V3",
+};
+
+static const char *type_str[] = {
+ [PACKET_RX_RING] = "PACKET_RX_RING",
+ [PACKET_TX_RING] = "PACKET_TX_RING",
+};
+
+static int test_tpacket(int version, int type)
+{
+ int sock;
+ struct ring ring;
+
+ fprintf(stderr, "test: %s with %s ", tpacket_str[version],
+ type_str[type]);
+ fflush(stderr);
+
+ if (version == TPACKET_V1 &&
+ test_kernel_bit_width() != test_user_bit_width()) {
+ fprintf(stderr, "test: skip %s %s since user and kernel "
+ "space have different bit width\n",
+ tpacket_str[version], type_str[type]);
+ return 0;
+ }
+
+ sock = pfsocket(version);
+ memset(&ring, 0, sizeof(ring));
+ setup_ring(sock, &ring, version, type);
+ mmap_ring(sock, &ring);
+ bind_ring(sock, &ring);
+ walk_ring(sock, &ring);
+ unmap_ring(sock, &ring);
+ close(sock);
+
+ fprintf(stderr, "\n");
+ return 0;
+}
+
+int main(void)
+{
+ int ret = 0;
+
+ ret |= test_tpacket(TPACKET_V1, PACKET_RX_RING);
+ ret |= test_tpacket(TPACKET_V1, PACKET_TX_RING);
+
+ ret |= test_tpacket(TPACKET_V2, PACKET_RX_RING);
+ ret |= test_tpacket(TPACKET_V2, PACKET_TX_RING);
+
+ ret |= test_tpacket(TPACKET_V3, PACKET_RX_RING);
+
+ if (ret)
+ return 1;
+
+ printf("OK. All tests passed\n");
+ return 0;
+}
diff --git a/kernel/tools/testing/selftests/net/run_afpackettests b/kernel/tools/testing/selftests/net/run_afpackettests
new file mode 100755
index 000000000..5246e782d
--- /dev/null
+++ b/kernel/tools/testing/selftests/net/run_afpackettests
@@ -0,0 +1,26 @@
+#!/bin/sh
+
+if [ $(id -u) != 0 ]; then
+ echo $msg must be run as root >&2
+ exit 0
+fi
+
+echo "--------------------"
+echo "running psock_fanout test"
+echo "--------------------"
+./psock_fanout
+if [ $? -ne 0 ]; then
+ echo "[FAIL]"
+else
+ echo "[PASS]"
+fi
+
+echo "--------------------"
+echo "running psock_tpacket test"
+echo "--------------------"
+./psock_tpacket
+if [ $? -ne 0 ]; then
+ echo "[FAIL]"
+else
+ echo "[PASS]"
+fi
diff --git a/kernel/tools/testing/selftests/net/run_netsocktests b/kernel/tools/testing/selftests/net/run_netsocktests
new file mode 100755
index 000000000..c09a682df
--- /dev/null
+++ b/kernel/tools/testing/selftests/net/run_netsocktests
@@ -0,0 +1,12 @@
+#!/bin/bash
+
+echo "--------------------"
+echo "running socket test"
+echo "--------------------"
+./socket
+if [ $? -ne 0 ]; then
+ echo "[FAIL]"
+else
+ echo "[PASS]"
+fi
+
diff --git a/kernel/tools/testing/selftests/net/socket.c b/kernel/tools/testing/selftests/net/socket.c
new file mode 100644
index 000000000..0f227f2f9
--- /dev/null
+++ b/kernel/tools/testing/selftests/net/socket.c
@@ -0,0 +1,92 @@
+#include <stdio.h>
+#include <errno.h>
+#include <unistd.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+
+struct socket_testcase {
+ int domain;
+ int type;
+ int protocol;
+
+ /* 0 = valid file descriptor
+ * -foo = error foo
+ */
+ int expect;
+
+ /* If non-zero, accept EAFNOSUPPORT to handle the case
+ * of the protocol not being configured into the kernel.
+ */
+ int nosupport_ok;
+};
+
+static struct socket_testcase tests[] = {
+ { AF_MAX, 0, 0, -EAFNOSUPPORT, 0 },
+ { AF_INET, SOCK_STREAM, IPPROTO_TCP, 0, 1 },
+ { AF_INET, SOCK_DGRAM, IPPROTO_TCP, -EPROTONOSUPPORT, 1 },
+ { AF_INET, SOCK_DGRAM, IPPROTO_UDP, 0, 1 },
+ { AF_INET, SOCK_STREAM, IPPROTO_UDP, -EPROTONOSUPPORT, 1 },
+};
+
+#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]))
+#define ERR_STRING_SZ 64
+
+static int run_tests(void)
+{
+ char err_string1[ERR_STRING_SZ];
+ char err_string2[ERR_STRING_SZ];
+ int i, err;
+
+ err = 0;
+ for (i = 0; i < ARRAY_SIZE(tests); i++) {
+ struct socket_testcase *s = &tests[i];
+ int fd;
+
+ fd = socket(s->domain, s->type, s->protocol);
+ if (fd < 0) {
+ if (s->nosupport_ok &&
+ errno == EAFNOSUPPORT)
+ continue;
+
+ if (s->expect < 0 &&
+ errno == -s->expect)
+ continue;
+
+ strerror_r(-s->expect, err_string1, ERR_STRING_SZ);
+ strerror_r(errno, err_string2, ERR_STRING_SZ);
+
+ fprintf(stderr, "socket(%d, %d, %d) expected "
+ "err (%s) got (%s)\n",
+ s->domain, s->type, s->protocol,
+ err_string1, err_string2);
+
+ err = -1;
+ break;
+ } else {
+ close(fd);
+
+ if (s->expect < 0) {
+ strerror_r(errno, err_string1, ERR_STRING_SZ);
+
+ fprintf(stderr, "socket(%d, %d, %d) expected "
+ "success got err (%s)\n",
+ s->domain, s->type, s->protocol,
+ err_string1);
+
+ err = -1;
+ break;
+ }
+ }
+ }
+
+ return err;
+}
+
+int main(void)
+{
+ int err = run_tests();
+
+ return err;
+}
diff --git a/kernel/tools/testing/selftests/net/test_bpf.sh b/kernel/tools/testing/selftests/net/test_bpf.sh
new file mode 100755
index 000000000..8b29796d4
--- /dev/null
+++ b/kernel/tools/testing/selftests/net/test_bpf.sh
@@ -0,0 +1,10 @@
+#!/bin/sh
+# Runs bpf test using test_bpf kernel module
+
+if /sbin/modprobe -q test_bpf ; then
+ /sbin/modprobe -q -r test_bpf;
+ echo "test_bpf: ok";
+else
+ echo "test_bpf: [FAIL]";
+ exit 1;
+fi
diff --git a/kernel/tools/testing/selftests/powerpc/Makefile b/kernel/tools/testing/selftests/powerpc/Makefile
new file mode 100644
index 000000000..5ad042345
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/Makefile
@@ -0,0 +1,53 @@
+# Makefile for powerpc selftests
+
+# ARCH can be overridden by the user for cross compiling
+ARCH ?= $(shell uname -m)
+ARCH := $(shell echo $(ARCH) | sed -e s/ppc.*/powerpc/)
+
+ifeq ($(ARCH),powerpc)
+
+GIT_VERSION = $(shell git describe --always --long --dirty || echo "unknown")
+
+CFLAGS := -Wall -O2 -flto -Wall -Werror -DGIT_VERSION='"$(GIT_VERSION)"' -I$(CURDIR) $(CFLAGS)
+
+export CFLAGS
+
+SUB_DIRS = pmu copyloops mm tm primitives stringloops vphn switch_endian
+
+endif
+
+all: $(SUB_DIRS)
+
+$(SUB_DIRS):
+ $(MAKE) -k -C $@ all
+
+include ../lib.mk
+
+override define RUN_TESTS
+ @for TARGET in $(SUB_DIRS); do \
+ $(MAKE) -C $$TARGET run_tests; \
+ done;
+endef
+
+override define INSTALL_RULE
+ @for TARGET in $(SUB_DIRS); do \
+ $(MAKE) -C $$TARGET install; \
+ done;
+endef
+
+override define EMIT_TESTS
+ @for TARGET in $(SUB_DIRS); do \
+ $(MAKE) -s -C $$TARGET emit_tests; \
+ done;
+endef
+
+clean:
+ @for TARGET in $(SUB_DIRS); do \
+ $(MAKE) -C $$TARGET clean; \
+ done;
+ rm -f tags
+
+tags:
+ find . -name '*.c' -o -name '*.h' | xargs ctags
+
+.PHONY: tags $(SUB_DIRS)
diff --git a/kernel/tools/testing/selftests/powerpc/copyloops/.gitignore b/kernel/tools/testing/selftests/powerpc/copyloops/.gitignore
new file mode 100644
index 000000000..25a192f62
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/copyloops/.gitignore
@@ -0,0 +1,4 @@
+copyuser_64
+copyuser_power7
+memcpy_64
+memcpy_power7
diff --git a/kernel/tools/testing/selftests/powerpc/copyloops/Makefile b/kernel/tools/testing/selftests/powerpc/copyloops/Makefile
new file mode 100644
index 000000000..384843ea0
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/copyloops/Makefile
@@ -0,0 +1,25 @@
+# The loops are all 64-bit code
+CFLAGS += -m64
+CFLAGS += -I$(CURDIR)
+CFLAGS += -D SELFTEST
+CFLAGS += -maltivec
+
+# Use our CFLAGS for the implicit .S rule
+ASFLAGS = $(CFLAGS)
+
+TEST_PROGS := copyuser_64 copyuser_power7 memcpy_64 memcpy_power7
+EXTRA_SOURCES := validate.c ../harness.c
+
+all: $(TEST_PROGS)
+
+copyuser_64: CPPFLAGS += -D COPY_LOOP=test___copy_tofrom_user_base
+copyuser_power7: CPPFLAGS += -D COPY_LOOP=test___copy_tofrom_user_power7
+memcpy_64: CPPFLAGS += -D COPY_LOOP=test_memcpy
+memcpy_power7: CPPFLAGS += -D COPY_LOOP=test_memcpy_power7
+
+$(TEST_PROGS): $(EXTRA_SOURCES)
+
+include ../../lib.mk
+
+clean:
+ rm -f $(TEST_PROGS) *.o
diff --git a/kernel/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h b/kernel/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h
new file mode 100644
index 000000000..50ae7d209
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h
@@ -0,0 +1,56 @@
+#include <ppc-asm.h>
+
+#define CONFIG_ALTIVEC
+
+#define r1 1
+
+#define R14 r14
+#define R15 r15
+#define R16 r16
+#define R17 r17
+#define R18 r18
+#define R19 r19
+#define R20 r20
+#define R21 r21
+#define R22 r22
+#define R29 r29
+#define R30 r30
+#define R31 r31
+
+#define STACKFRAMESIZE 256
+#define STK_REG(i) (112 + ((i)-14)*8)
+
+#define _GLOBAL(A) FUNC_START(test_ ## A)
+#define _GLOBAL_TOC(A) _GLOBAL(A)
+
+#define PPC_MTOCRF(A, B) mtocrf A, B
+
+FUNC_START(enter_vmx_usercopy)
+ li r3,1
+ blr
+
+FUNC_START(exit_vmx_usercopy)
+ li r3,0
+ blr
+
+FUNC_START(enter_vmx_copy)
+ li r3,1
+ blr
+
+FUNC_START(exit_vmx_copy)
+ blr
+
+FUNC_START(memcpy_power7)
+ blr
+
+FUNC_START(__copy_tofrom_user_power7)
+ blr
+
+FUNC_START(__copy_tofrom_user_base)
+ blr
+
+#define BEGIN_FTR_SECTION
+#define FTR_SECTION_ELSE
+#define ALT_FTR_SECTION_END_IFCLR(x)
+#define ALT_FTR_SECTION_END(x, y)
+#define END_FTR_SECTION_IFCLR(x)
diff --git a/kernel/tools/testing/selftests/powerpc/copyloops/asm/processor.h b/kernel/tools/testing/selftests/powerpc/copyloops/asm/processor.h
new file mode 100644
index 000000000..e69de29bb
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/copyloops/asm/processor.h
diff --git a/kernel/tools/testing/selftests/powerpc/copyloops/copyuser_64.S b/kernel/tools/testing/selftests/powerpc/copyloops/copyuser_64.S
new file mode 120000
index 000000000..f1c418a25
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/copyloops/copyuser_64.S
@@ -0,0 +1 @@
+../../../../../arch/powerpc/lib/copyuser_64.S \ No newline at end of file
diff --git a/kernel/tools/testing/selftests/powerpc/copyloops/copyuser_power7.S b/kernel/tools/testing/selftests/powerpc/copyloops/copyuser_power7.S
new file mode 120000
index 000000000..478689598
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/copyloops/copyuser_power7.S
@@ -0,0 +1 @@
+../../../../../arch/powerpc/lib/copyuser_power7.S \ No newline at end of file
diff --git a/kernel/tools/testing/selftests/powerpc/copyloops/memcpy_64.S b/kernel/tools/testing/selftests/powerpc/copyloops/memcpy_64.S
new file mode 120000
index 000000000..cce33fb6f
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/copyloops/memcpy_64.S
@@ -0,0 +1 @@
+../../../../../arch/powerpc/lib/memcpy_64.S \ No newline at end of file
diff --git a/kernel/tools/testing/selftests/powerpc/copyloops/memcpy_power7.S b/kernel/tools/testing/selftests/powerpc/copyloops/memcpy_power7.S
new file mode 120000
index 000000000..0d6fbfaf3
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/copyloops/memcpy_power7.S
@@ -0,0 +1 @@
+../../../../../arch/powerpc/lib/memcpy_power7.S \ No newline at end of file
diff --git a/kernel/tools/testing/selftests/powerpc/copyloops/validate.c b/kernel/tools/testing/selftests/powerpc/copyloops/validate.c
new file mode 100644
index 000000000..1750ff57e
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/copyloops/validate.c
@@ -0,0 +1,99 @@
+#include <malloc.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdbool.h>
+
+#include "../utils.h"
+
+#define MAX_LEN 8192
+#define MAX_OFFSET 16
+#define MIN_REDZONE 128
+#define BUFLEN (MAX_LEN+MAX_OFFSET+2*MIN_REDZONE)
+#define POISON 0xa5
+
+unsigned long COPY_LOOP(void *to, const void *from, unsigned long size);
+
+static void do_one(char *src, char *dst, unsigned long src_off,
+ unsigned long dst_off, unsigned long len, void *redzone,
+ void *fill)
+{
+ char *srcp, *dstp;
+ unsigned long ret;
+ unsigned long i;
+
+ srcp = src + MIN_REDZONE + src_off;
+ dstp = dst + MIN_REDZONE + dst_off;
+
+ memset(src, POISON, BUFLEN);
+ memset(dst, POISON, BUFLEN);
+ memcpy(srcp, fill, len);
+
+ ret = COPY_LOOP(dstp, srcp, len);
+ if (ret && ret != (unsigned long)dstp) {
+ printf("(%p,%p,%ld) returned %ld\n", dstp, srcp, len, ret);
+ abort();
+ }
+
+ if (memcmp(dstp, srcp, len)) {
+ printf("(%p,%p,%ld) miscompare\n", dstp, srcp, len);
+ printf("src: ");
+ for (i = 0; i < len; i++)
+ printf("%02x ", srcp[i]);
+ printf("\ndst: ");
+ for (i = 0; i < len; i++)
+ printf("%02x ", dstp[i]);
+ printf("\n");
+ abort();
+ }
+
+ if (memcmp(dst, redzone, dstp - dst)) {
+ printf("(%p,%p,%ld) redzone before corrupted\n",
+ dstp, srcp, len);
+ abort();
+ }
+
+ if (memcmp(dstp+len, redzone, dst+BUFLEN-(dstp+len))) {
+ printf("(%p,%p,%ld) redzone after corrupted\n",
+ dstp, srcp, len);
+ abort();
+ }
+}
+
+int test_copy_loop(void)
+{
+ char *src, *dst, *redzone, *fill;
+ unsigned long len, src_off, dst_off;
+ unsigned long i;
+
+ src = memalign(BUFLEN, BUFLEN);
+ dst = memalign(BUFLEN, BUFLEN);
+ redzone = malloc(BUFLEN);
+ fill = malloc(BUFLEN);
+
+ if (!src || !dst || !redzone || !fill) {
+ fprintf(stderr, "malloc failed\n");
+ exit(1);
+ }
+
+ memset(redzone, POISON, BUFLEN);
+
+ /* Fill with sequential bytes */
+ for (i = 0; i < BUFLEN; i++)
+ fill[i] = i & 0xff;
+
+ for (len = 1; len < MAX_LEN; len++) {
+ for (src_off = 0; src_off < MAX_OFFSET; src_off++) {
+ for (dst_off = 0; dst_off < MAX_OFFSET; dst_off++) {
+ do_one(src, dst, src_off, dst_off, len,
+ redzone, fill);
+ }
+ }
+ }
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(test_copy_loop, str(COPY_LOOP));
+}
diff --git a/kernel/tools/testing/selftests/powerpc/harness.c b/kernel/tools/testing/selftests/powerpc/harness.c
new file mode 100644
index 000000000..f7997affd
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/harness.c
@@ -0,0 +1,161 @@
+/*
+ * Copyright 2013, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <errno.h>
+#include <signal.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <unistd.h>
+#include <elf.h>
+#include <fcntl.h>
+#include <link.h>
+#include <sys/stat.h>
+
+#include "subunit.h"
+#include "utils.h"
+
+#define TIMEOUT 120
+#define KILL_TIMEOUT 5
+
+
+int run_test(int (test_function)(void), char *name)
+{
+ bool terminated;
+ int rc, status;
+ pid_t pid;
+
+ /* Make sure output is flushed before forking */
+ fflush(stdout);
+
+ pid = fork();
+ if (pid == 0) {
+ setpgid(0, 0);
+ exit(test_function());
+ } else if (pid == -1) {
+ perror("fork");
+ return 1;
+ }
+
+ setpgid(pid, pid);
+
+ /* Wake us up in timeout seconds */
+ alarm(TIMEOUT);
+ terminated = false;
+
+wait:
+ rc = waitpid(pid, &status, 0);
+ if (rc == -1) {
+ if (errno != EINTR) {
+ printf("unknown error from waitpid\n");
+ return 1;
+ }
+
+ if (terminated) {
+ printf("!! force killing %s\n", name);
+ kill(-pid, SIGKILL);
+ return 1;
+ } else {
+ printf("!! killing %s\n", name);
+ kill(-pid, SIGTERM);
+ terminated = true;
+ alarm(KILL_TIMEOUT);
+ goto wait;
+ }
+ }
+
+ /* Kill anything else in the process group that is still running */
+ kill(-pid, SIGTERM);
+
+ if (WIFEXITED(status))
+ status = WEXITSTATUS(status);
+ else {
+ if (WIFSIGNALED(status))
+ printf("!! child died by signal %d\n", WTERMSIG(status));
+ else
+ printf("!! child died by unknown cause\n");
+
+ status = 1; /* Signal or other */
+ }
+
+ return status;
+}
+
+static void alarm_handler(int signum)
+{
+ /* Jut wake us up from waitpid */
+}
+
+static struct sigaction alarm_action = {
+ .sa_handler = alarm_handler,
+};
+
+int test_harness(int (test_function)(void), char *name)
+{
+ int rc;
+
+ test_start(name);
+ test_set_git_version(GIT_VERSION);
+
+ if (sigaction(SIGALRM, &alarm_action, NULL)) {
+ perror("sigaction");
+ test_error(name);
+ return 1;
+ }
+
+ rc = run_test(test_function, name);
+
+ if (rc == MAGIC_SKIP_RETURN_VALUE)
+ test_skip(name);
+ else
+ test_finish(name, rc);
+
+ return rc;
+}
+
+static char auxv[4096];
+
+void *get_auxv_entry(int type)
+{
+ ElfW(auxv_t) *p;
+ void *result;
+ ssize_t num;
+ int fd;
+
+ fd = open("/proc/self/auxv", O_RDONLY);
+ if (fd == -1) {
+ perror("open");
+ return NULL;
+ }
+
+ result = NULL;
+
+ num = read(fd, auxv, sizeof(auxv));
+ if (num < 0) {
+ perror("read");
+ goto out;
+ }
+
+ if (num > sizeof(auxv)) {
+ printf("Overflowed auxv buffer\n");
+ goto out;
+ }
+
+ p = (ElfW(auxv_t) *)auxv;
+
+ while (p->a_type != AT_NULL) {
+ if (p->a_type == type) {
+ result = (void *)p->a_un.a_val;
+ break;
+ }
+
+ p++;
+ }
+out:
+ close(fd);
+ return result;
+}
diff --git a/kernel/tools/testing/selftests/powerpc/mm/.gitignore b/kernel/tools/testing/selftests/powerpc/mm/.gitignore
new file mode 100644
index 000000000..b43ade0ec
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/mm/.gitignore
@@ -0,0 +1,3 @@
+hugetlb_vs_thp_test
+subpage_prot
+tempfile
diff --git a/kernel/tools/testing/selftests/powerpc/mm/Makefile b/kernel/tools/testing/selftests/powerpc/mm/Makefile
new file mode 100644
index 000000000..41cc3ed66
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/mm/Makefile
@@ -0,0 +1,16 @@
+noarg:
+ $(MAKE) -C ../
+
+TEST_PROGS := hugetlb_vs_thp_test subpage_prot
+
+all: $(TEST_PROGS) tempfile
+
+$(TEST_PROGS): ../harness.c
+
+include ../../lib.mk
+
+tempfile:
+ dd if=/dev/zero of=tempfile bs=64k count=1
+
+clean:
+ rm -f $(TEST_PROGS) tempfile
diff --git a/kernel/tools/testing/selftests/powerpc/mm/hugetlb_vs_thp_test.c b/kernel/tools/testing/selftests/powerpc/mm/hugetlb_vs_thp_test.c
new file mode 100644
index 000000000..49003674d
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/mm/hugetlb_vs_thp_test.c
@@ -0,0 +1,76 @@
+#include <stdio.h>
+#include <sys/mman.h>
+#include <unistd.h>
+
+#include "utils.h"
+
+/* This must match the huge page & THP size */
+#define SIZE (16 * 1024 * 1024)
+
+static int test_body(void)
+{
+ void *addr;
+ char *p;
+
+ addr = (void *)0xa0000000;
+
+ p = mmap(addr, SIZE, PROT_READ | PROT_WRITE,
+ MAP_HUGETLB | MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
+ if (p != MAP_FAILED) {
+ /*
+ * Typically the mmap will fail because no huge pages are
+ * allocated on the system. But if there are huge pages
+ * allocated the mmap will succeed. That's fine too, we just
+ * munmap here before continuing. munmap() length of
+ * MAP_HUGETLB memory must be hugepage aligned.
+ */
+ if (munmap(addr, SIZE)) {
+ perror("munmap");
+ return 1;
+ }
+ }
+
+ p = mmap(addr, SIZE, PROT_READ | PROT_WRITE,
+ MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
+ if (p == MAP_FAILED) {
+ printf("Mapping failed @ %p\n", addr);
+ perror("mmap");
+ return 1;
+ }
+
+ /*
+ * Either a user or kernel access is sufficient to trigger the bug.
+ * A kernel access is easier to spot & debug, as it will trigger the
+ * softlockup or RCU stall detectors, and when the system is kicked
+ * into xmon we get a backtrace in the kernel.
+ *
+ * A good option is:
+ * getcwd(p, SIZE);
+ *
+ * For the purposes of this testcase it's preferable to spin in
+ * userspace, so the harness can kill us if we get stuck. That way we
+ * see a test failure rather than a dead system.
+ */
+ *p = 0xf;
+
+ munmap(addr, SIZE);
+
+ return 0;
+}
+
+static int test_main(void)
+{
+ int i;
+
+ /* 10,000 because it's a "bunch", and completes reasonably quickly */
+ for (i = 0; i < 10000; i++)
+ if (test_body())
+ return 1;
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(test_main, "hugetlb_vs_thp");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/mm/subpage_prot.c b/kernel/tools/testing/selftests/powerpc/mm/subpage_prot.c
new file mode 100644
index 000000000..440180ff8
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/mm/subpage_prot.c
@@ -0,0 +1,220 @@
+/*
+ * Copyright IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2.1 of the GNU Lesser General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it would be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ */
+
+#include <assert.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <signal.h>
+#include <stdarg.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <sys/ptrace.h>
+#include <sys/syscall.h>
+#include <ucontext.h>
+#include <unistd.h>
+
+#include "utils.h"
+
+char *file_name;
+
+int in_test;
+volatile int faulted;
+volatile void *dar;
+int errors;
+
+static void segv(int signum, siginfo_t *info, void *ctxt_v)
+{
+ ucontext_t *ctxt = (ucontext_t *)ctxt_v;
+ struct pt_regs *regs = ctxt->uc_mcontext.regs;
+
+ if (!in_test) {
+ fprintf(stderr, "Segfault outside of test !\n");
+ exit(1);
+ }
+
+ faulted = 1;
+ dar = (void *)regs->dar;
+ regs->nip += 4;
+}
+
+static inline void do_read(const volatile void *addr)
+{
+ int ret;
+
+ asm volatile("lwz %0,0(%1); twi 0,%0,0; isync;\n"
+ : "=r" (ret) : "r" (addr) : "memory");
+}
+
+static inline void do_write(const volatile void *addr)
+{
+ int val = 0x1234567;
+
+ asm volatile("stw %0,0(%1); sync; \n"
+ : : "r" (val), "r" (addr) : "memory");
+}
+
+static inline void check_faulted(void *addr, long page, long subpage, int write)
+{
+ int want_fault = (subpage == ((page + 3) % 16));
+
+ if (write)
+ want_fault |= (subpage == ((page + 1) % 16));
+
+ if (faulted != want_fault) {
+ printf("Failed at 0x%p (p=%ld,sp=%ld,w=%d), want=%s, got=%s !\n",
+ addr, page, subpage, write,
+ want_fault ? "fault" : "pass",
+ faulted ? "fault" : "pass");
+ ++errors;
+ }
+
+ if (faulted) {
+ if (dar != addr) {
+ printf("Fault expected at 0x%p and happened at 0x%p !\n",
+ addr, dar);
+ }
+ faulted = 0;
+ asm volatile("sync" : : : "memory");
+ }
+}
+
+static int run_test(void *addr, unsigned long size)
+{
+ unsigned int *map;
+ long i, j, pages, err;
+
+ pages = size / 0x10000;
+ map = malloc(pages * 4);
+ assert(map);
+
+ /*
+ * for each page, mark subpage i % 16 read only and subpage
+ * (i + 3) % 16 inaccessible
+ */
+ for (i = 0; i < pages; i++) {
+ map[i] = (0x40000000 >> (((i + 1) * 2) % 32)) |
+ (0xc0000000 >> (((i + 3) * 2) % 32));
+ }
+
+ err = syscall(__NR_subpage_prot, addr, size, map);
+ if (err) {
+ perror("subpage_perm");
+ return 1;
+ }
+ free(map);
+
+ in_test = 1;
+ errors = 0;
+ for (i = 0; i < pages; i++) {
+ for (j = 0; j < 16; j++, addr += 0x1000) {
+ do_read(addr);
+ check_faulted(addr, i, j, 0);
+ do_write(addr);
+ check_faulted(addr, i, j, 1);
+ }
+ }
+
+ in_test = 0;
+ if (errors) {
+ printf("%d errors detected\n", errors);
+ return 1;
+ }
+
+ return 0;
+}
+
+int test_anon(void)
+{
+ unsigned long align;
+ struct sigaction act = {
+ .sa_sigaction = segv,
+ .sa_flags = SA_SIGINFO
+ };
+ void *mallocblock;
+ unsigned long mallocsize;
+
+ if (getpagesize() != 0x10000) {
+ fprintf(stderr, "Kernel page size must be 64K!\n");
+ return 1;
+ }
+
+ sigaction(SIGSEGV, &act, NULL);
+
+ mallocsize = 4 * 16 * 1024 * 1024;
+
+ FAIL_IF(posix_memalign(&mallocblock, 64 * 1024, mallocsize));
+
+ align = (unsigned long)mallocblock;
+ if (align & 0xffff)
+ align = (align | 0xffff) + 1;
+
+ mallocblock = (void *)align;
+
+ printf("allocated malloc block of 0x%lx bytes at 0x%p\n",
+ mallocsize, mallocblock);
+
+ printf("testing malloc block...\n");
+
+ return run_test(mallocblock, mallocsize);
+}
+
+int test_file(void)
+{
+ struct sigaction act = {
+ .sa_sigaction = segv,
+ .sa_flags = SA_SIGINFO
+ };
+ void *fileblock;
+ off_t filesize;
+ int fd;
+
+ fd = open(file_name, O_RDWR);
+ if (fd == -1) {
+ perror("failed to open file");
+ return 1;
+ }
+ sigaction(SIGSEGV, &act, NULL);
+
+ filesize = lseek(fd, 0, SEEK_END);
+ if (filesize & 0xffff)
+ filesize &= ~0xfffful;
+
+ fileblock = mmap(NULL, filesize, PROT_READ | PROT_WRITE,
+ MAP_SHARED, fd, 0);
+ if (fileblock == MAP_FAILED) {
+ perror("failed to map file");
+ return 1;
+ }
+ printf("allocated %s for 0x%lx bytes at 0x%p\n",
+ file_name, filesize, fileblock);
+
+ printf("testing file map...\n");
+
+ return run_test(fileblock, filesize);
+}
+
+int main(int argc, char *argv[])
+{
+ test_harness(test_anon, "subpage_prot_anon");
+
+ if (argc > 1)
+ file_name = argv[1];
+ else
+ file_name = "tempfile";
+
+ test_harness(test_file, "subpage_prot_file");
+
+ return 0;
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/.gitignore b/kernel/tools/testing/selftests/powerpc/pmu/.gitignore
new file mode 100644
index 000000000..e748f336e
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/.gitignore
@@ -0,0 +1,3 @@
+count_instructions
+l3_bank_test
+per_event_excludes
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/Makefile b/kernel/tools/testing/selftests/powerpc/pmu/Makefile
new file mode 100644
index 000000000..a9099d9f8
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/Makefile
@@ -0,0 +1,42 @@
+noarg:
+ $(MAKE) -C ../
+
+TEST_PROGS := count_instructions l3_bank_test per_event_excludes
+EXTRA_SOURCES := ../harness.c event.c lib.c
+
+all: $(TEST_PROGS) ebb
+
+$(TEST_PROGS): $(EXTRA_SOURCES)
+
+# loop.S can only be built 64-bit
+count_instructions: loop.S count_instructions.c $(EXTRA_SOURCES)
+ $(CC) $(CFLAGS) -m64 -o $@ $^
+
+include ../../lib.mk
+
+DEFAULT_RUN_TESTS := $(RUN_TESTS)
+override define RUN_TESTS
+ $(DEFAULT_RUN_TESTS)
+ $(MAKE) -C ebb run_tests
+endef
+
+DEFAULT_EMIT_TESTS := $(EMIT_TESTS)
+override define EMIT_TESTS
+ $(DEFAULT_EMIT_TESTS)
+ $(MAKE) -s -C ebb emit_tests
+endef
+
+DEFAULT_INSTALL_RULE := $(INSTALL_RULE)
+override define INSTALL_RULE
+ $(DEFAULT_INSTALL_RULE)
+ $(MAKE) -C ebb install
+endef
+
+clean:
+ rm -f $(TEST_PROGS) loop.o
+ $(MAKE) -C ebb clean
+
+ebb:
+ $(MAKE) -k -C $@ all
+
+.PHONY: all run_tests clean ebb
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/count_instructions.c b/kernel/tools/testing/selftests/powerpc/pmu/count_instructions.c
new file mode 100644
index 000000000..4622117b2
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/count_instructions.c
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2013, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#define _GNU_SOURCE
+
+#include <stdio.h>
+#include <stdbool.h>
+#include <string.h>
+#include <sys/prctl.h>
+
+#include "event.h"
+#include "utils.h"
+#include "lib.h"
+
+extern void thirty_two_instruction_loop(u64 loops);
+
+static void setup_event(struct event *e, u64 config, char *name)
+{
+ event_init_opts(e, config, PERF_TYPE_HARDWARE, name);
+
+ e->attr.disabled = 1;
+ e->attr.exclude_kernel = 1;
+ e->attr.exclude_hv = 1;
+ e->attr.exclude_idle = 1;
+}
+
+static int do_count_loop(struct event *events, u64 instructions,
+ u64 overhead, bool report)
+{
+ s64 difference, expected;
+ double percentage;
+
+ prctl(PR_TASK_PERF_EVENTS_ENABLE);
+
+ /* Run for 1M instructions */
+ thirty_two_instruction_loop(instructions >> 5);
+
+ prctl(PR_TASK_PERF_EVENTS_DISABLE);
+
+ event_read(&events[0]);
+ event_read(&events[1]);
+
+ expected = instructions + overhead;
+ difference = events[0].result.value - expected;
+ percentage = (double)difference / events[0].result.value * 100;
+
+ if (report) {
+ event_report(&events[0]);
+ event_report(&events[1]);
+
+ printf("Looped for %llu instructions, overhead %llu\n", instructions, overhead);
+ printf("Expected %llu\n", expected);
+ printf("Actual %llu\n", events[0].result.value);
+ printf("Delta %lld, %f%%\n", difference, percentage);
+ }
+
+ event_reset(&events[0]);
+ event_reset(&events[1]);
+
+ if (difference < 0)
+ difference = -difference;
+
+ /* Tolerate a difference below 0.0001 % */
+ difference *= 10000 * 100;
+ if (difference / events[0].result.value)
+ return -1;
+
+ return 0;
+}
+
+/* Count how many instructions it takes to do a null loop */
+static u64 determine_overhead(struct event *events)
+{
+ u64 current, overhead;
+ int i;
+
+ do_count_loop(events, 0, 0, false);
+ overhead = events[0].result.value;
+
+ for (i = 0; i < 100; i++) {
+ do_count_loop(events, 0, 0, false);
+ current = events[0].result.value;
+ if (current < overhead) {
+ printf("Replacing overhead %llu with %llu\n", overhead, current);
+ overhead = current;
+ }
+ }
+
+ return overhead;
+}
+
+static int test_body(void)
+{
+ struct event events[2];
+ u64 overhead;
+
+ setup_event(&events[0], PERF_COUNT_HW_INSTRUCTIONS, "instructions");
+ setup_event(&events[1], PERF_COUNT_HW_CPU_CYCLES, "cycles");
+
+ if (event_open(&events[0])) {
+ perror("perf_event_open");
+ return -1;
+ }
+
+ if (event_open_with_group(&events[1], events[0].fd)) {
+ perror("perf_event_open");
+ return -1;
+ }
+
+ overhead = determine_overhead(events);
+ printf("Overhead of null loop: %llu instructions\n", overhead);
+
+ /* Run for 1Mi instructions */
+ FAIL_IF(do_count_loop(events, 1000000, overhead, true));
+
+ /* Run for 10Mi instructions */
+ FAIL_IF(do_count_loop(events, 10000000, overhead, true));
+
+ /* Run for 100Mi instructions */
+ FAIL_IF(do_count_loop(events, 100000000, overhead, true));
+
+ /* Run for 1Bi instructions */
+ FAIL_IF(do_count_loop(events, 1000000000, overhead, true));
+
+ /* Run for 16Bi instructions */
+ FAIL_IF(do_count_loop(events, 16000000000, overhead, true));
+
+ /* Run for 64Bi instructions */
+ FAIL_IF(do_count_loop(events, 64000000000, overhead, true));
+
+ event_close(&events[0]);
+ event_close(&events[1]);
+
+ return 0;
+}
+
+static int count_instructions(void)
+{
+ return eat_cpu(test_body);
+}
+
+int main(void)
+{
+ return test_harness(count_instructions, "count_instructions");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/.gitignore b/kernel/tools/testing/selftests/powerpc/pmu/ebb/.gitignore
new file mode 100644
index 000000000..42bddbed8
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/.gitignore
@@ -0,0 +1,22 @@
+reg_access_test
+event_attributes_test
+cycles_test
+cycles_with_freeze_test
+pmc56_overflow_test
+ebb_vs_cpu_event_test
+cpu_event_vs_ebb_test
+cpu_event_pinned_vs_ebb_test
+task_event_vs_ebb_test
+task_event_pinned_vs_ebb_test
+multi_ebb_procs_test
+multi_counter_test
+pmae_handling_test
+close_clears_pmcc_test
+instruction_count_test
+fork_cleanup_test
+ebb_on_child_test
+ebb_on_willing_child_test
+back_to_back_ebbs_test
+lost_exception_test
+no_handler_test
+cycles_with_mmcr2_test
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/Makefile b/kernel/tools/testing/selftests/powerpc/pmu/ebb/Makefile
new file mode 100644
index 000000000..5cdc9dbf2
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/Makefile
@@ -0,0 +1,30 @@
+noarg:
+ $(MAKE) -C ../../
+
+# The EBB handler is 64-bit code and everything links against it
+CFLAGS += -m64
+
+TEST_PROGS := reg_access_test event_attributes_test cycles_test \
+ cycles_with_freeze_test pmc56_overflow_test \
+ ebb_vs_cpu_event_test cpu_event_vs_ebb_test \
+ cpu_event_pinned_vs_ebb_test task_event_vs_ebb_test \
+ task_event_pinned_vs_ebb_test multi_ebb_procs_test \
+ multi_counter_test pmae_handling_test \
+ close_clears_pmcc_test instruction_count_test \
+ fork_cleanup_test ebb_on_child_test \
+ ebb_on_willing_child_test back_to_back_ebbs_test \
+ lost_exception_test no_handler_test \
+ cycles_with_mmcr2_test
+
+all: $(TEST_PROGS)
+
+$(TEST_PROGS): ../../harness.c ../event.c ../lib.c ebb.c ebb_handler.S trace.c busy_loop.S
+
+instruction_count_test: ../loop.S
+
+lost_exception_test: ../lib.c
+
+include ../../../lib.mk
+
+clean:
+ rm -f $(TEST_PROGS)
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/back_to_back_ebbs_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/back_to_back_ebbs_test.c
new file mode 100644
index 000000000..66ea765c0
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/back_to_back_ebbs_test.c
@@ -0,0 +1,106 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "ebb.h"
+
+
+#define NUMBER_OF_EBBS 50
+
+/*
+ * Test that if we overflow the counter while in the EBB handler, we take
+ * another EBB on exiting from the handler.
+ *
+ * We do this by counting with a stupidly low sample period, causing us to
+ * overflow the PMU while we're still in the EBB handler, leading to another
+ * EBB.
+ *
+ * We get out of what would otherwise be an infinite loop by leaving the
+ * counter frozen once we've taken enough EBBs.
+ */
+
+static void ebb_callee(void)
+{
+ uint64_t siar, val;
+
+ val = mfspr(SPRN_BESCR);
+ if (!(val & BESCR_PMEO)) {
+ ebb_state.stats.spurious++;
+ goto out;
+ }
+
+ ebb_state.stats.ebb_count++;
+ trace_log_counter(ebb_state.trace, ebb_state.stats.ebb_count);
+
+ /* Resets the PMC */
+ count_pmc(1, sample_period);
+
+out:
+ if (ebb_state.stats.ebb_count == NUMBER_OF_EBBS)
+ /* Reset but leave counters frozen */
+ reset_ebb_with_clear_mask(MMCR0_PMAO);
+ else
+ /* Unfreezes */
+ reset_ebb();
+
+ /* Do some stuff to chew some cycles and pop the counter */
+ siar = mfspr(SPRN_SIAR);
+ trace_log_reg(ebb_state.trace, SPRN_SIAR, siar);
+
+ val = mfspr(SPRN_PMC1);
+ trace_log_reg(ebb_state.trace, SPRN_PMC1, val);
+
+ val = mfspr(SPRN_MMCR0);
+ trace_log_reg(ebb_state.trace, SPRN_MMCR0, val);
+}
+
+int back_to_back_ebbs(void)
+{
+ struct event event;
+
+ event_init_named(&event, 0x1001e, "cycles");
+ event_leader_ebb_init(&event);
+
+ event.attr.exclude_kernel = 1;
+ event.attr.exclude_hv = 1;
+ event.attr.exclude_idle = 1;
+
+ FAIL_IF(event_open(&event));
+
+ setup_ebb_handler(ebb_callee);
+
+ FAIL_IF(ebb_event_enable(&event));
+
+ sample_period = 5;
+
+ ebb_freeze_pmcs();
+ mtspr(SPRN_PMC1, pmc_sample_period(sample_period));
+ ebb_global_enable();
+ ebb_unfreeze_pmcs();
+
+ while (ebb_state.stats.ebb_count < NUMBER_OF_EBBS)
+ FAIL_IF(core_busy_loop());
+
+ ebb_global_disable();
+ ebb_freeze_pmcs();
+
+ count_pmc(1, sample_period);
+
+ dump_ebb_state();
+
+ event_close(&event);
+
+ FAIL_IF(ebb_state.stats.ebb_count != NUMBER_OF_EBBS);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(back_to_back_ebbs, "back_to_back_ebbs");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/busy_loop.S b/kernel/tools/testing/selftests/powerpc/pmu/ebb/busy_loop.S
new file mode 100644
index 000000000..c7e4093f1
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/busy_loop.S
@@ -0,0 +1,271 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <ppc-asm.h>
+
+ .text
+
+FUNC_START(core_busy_loop)
+ stdu %r1, -168(%r1)
+ std r14, 160(%r1)
+ std r15, 152(%r1)
+ std r16, 144(%r1)
+ std r17, 136(%r1)
+ std r18, 128(%r1)
+ std r19, 120(%r1)
+ std r20, 112(%r1)
+ std r21, 104(%r1)
+ std r22, 96(%r1)
+ std r23, 88(%r1)
+ std r24, 80(%r1)
+ std r25, 72(%r1)
+ std r26, 64(%r1)
+ std r27, 56(%r1)
+ std r28, 48(%r1)
+ std r29, 40(%r1)
+ std r30, 32(%r1)
+ std r31, 24(%r1)
+
+ li r3, 0x3030
+ std r3, -96(%r1)
+ li r4, 0x4040
+ std r4, -104(%r1)
+ li r5, 0x5050
+ std r5, -112(%r1)
+ li r6, 0x6060
+ std r6, -120(%r1)
+ li r7, 0x7070
+ std r7, -128(%r1)
+ li r8, 0x0808
+ std r8, -136(%r1)
+ li r9, 0x0909
+ std r9, -144(%r1)
+ li r10, 0x1010
+ std r10, -152(%r1)
+ li r11, 0x1111
+ std r11, -160(%r1)
+ li r14, 0x1414
+ std r14, -168(%r1)
+ li r15, 0x1515
+ std r15, -176(%r1)
+ li r16, 0x1616
+ std r16, -184(%r1)
+ li r17, 0x1717
+ std r17, -192(%r1)
+ li r18, 0x1818
+ std r18, -200(%r1)
+ li r19, 0x1919
+ std r19, -208(%r1)
+ li r20, 0x2020
+ std r20, -216(%r1)
+ li r21, 0x2121
+ std r21, -224(%r1)
+ li r22, 0x2222
+ std r22, -232(%r1)
+ li r23, 0x2323
+ std r23, -240(%r1)
+ li r24, 0x2424
+ std r24, -248(%r1)
+ li r25, 0x2525
+ std r25, -256(%r1)
+ li r26, 0x2626
+ std r26, -264(%r1)
+ li r27, 0x2727
+ std r27, -272(%r1)
+ li r28, 0x2828
+ std r28, -280(%r1)
+ li r29, 0x2929
+ std r29, -288(%r1)
+ li r30, 0x3030
+ li r31, 0x3131
+
+ li r3, 0
+0: addi r3, r3, 1
+ cmpwi r3, 100
+ blt 0b
+
+ /* Return 1 (fail) unless we get through all the checks */
+ li r3, 1
+
+ /* Check none of our registers have been corrupted */
+ cmpwi r4, 0x4040
+ bne 1f
+ cmpwi r5, 0x5050
+ bne 1f
+ cmpwi r6, 0x6060
+ bne 1f
+ cmpwi r7, 0x7070
+ bne 1f
+ cmpwi r8, 0x0808
+ bne 1f
+ cmpwi r9, 0x0909
+ bne 1f
+ cmpwi r10, 0x1010
+ bne 1f
+ cmpwi r11, 0x1111
+ bne 1f
+ cmpwi r14, 0x1414
+ bne 1f
+ cmpwi r15, 0x1515
+ bne 1f
+ cmpwi r16, 0x1616
+ bne 1f
+ cmpwi r17, 0x1717
+ bne 1f
+ cmpwi r18, 0x1818
+ bne 1f
+ cmpwi r19, 0x1919
+ bne 1f
+ cmpwi r20, 0x2020
+ bne 1f
+ cmpwi r21, 0x2121
+ bne 1f
+ cmpwi r22, 0x2222
+ bne 1f
+ cmpwi r23, 0x2323
+ bne 1f
+ cmpwi r24, 0x2424
+ bne 1f
+ cmpwi r25, 0x2525
+ bne 1f
+ cmpwi r26, 0x2626
+ bne 1f
+ cmpwi r27, 0x2727
+ bne 1f
+ cmpwi r28, 0x2828
+ bne 1f
+ cmpwi r29, 0x2929
+ bne 1f
+ cmpwi r30, 0x3030
+ bne 1f
+ cmpwi r31, 0x3131
+ bne 1f
+
+ /* Load junk into all our registers before we reload them from the stack. */
+ li r3, 0xde
+ li r4, 0xad
+ li r5, 0xbe
+ li r6, 0xef
+ li r7, 0xde
+ li r8, 0xad
+ li r9, 0xbe
+ li r10, 0xef
+ li r11, 0xde
+ li r14, 0xad
+ li r15, 0xbe
+ li r16, 0xef
+ li r17, 0xde
+ li r18, 0xad
+ li r19, 0xbe
+ li r20, 0xef
+ li r21, 0xde
+ li r22, 0xad
+ li r23, 0xbe
+ li r24, 0xef
+ li r25, 0xde
+ li r26, 0xad
+ li r27, 0xbe
+ li r28, 0xef
+ li r29, 0xdd
+
+ ld r3, -96(%r1)
+ cmpwi r3, 0x3030
+ bne 1f
+ ld r4, -104(%r1)
+ cmpwi r4, 0x4040
+ bne 1f
+ ld r5, -112(%r1)
+ cmpwi r5, 0x5050
+ bne 1f
+ ld r6, -120(%r1)
+ cmpwi r6, 0x6060
+ bne 1f
+ ld r7, -128(%r1)
+ cmpwi r7, 0x7070
+ bne 1f
+ ld r8, -136(%r1)
+ cmpwi r8, 0x0808
+ bne 1f
+ ld r9, -144(%r1)
+ cmpwi r9, 0x0909
+ bne 1f
+ ld r10, -152(%r1)
+ cmpwi r10, 0x1010
+ bne 1f
+ ld r11, -160(%r1)
+ cmpwi r11, 0x1111
+ bne 1f
+ ld r14, -168(%r1)
+ cmpwi r14, 0x1414
+ bne 1f
+ ld r15, -176(%r1)
+ cmpwi r15, 0x1515
+ bne 1f
+ ld r16, -184(%r1)
+ cmpwi r16, 0x1616
+ bne 1f
+ ld r17, -192(%r1)
+ cmpwi r17, 0x1717
+ bne 1f
+ ld r18, -200(%r1)
+ cmpwi r18, 0x1818
+ bne 1f
+ ld r19, -208(%r1)
+ cmpwi r19, 0x1919
+ bne 1f
+ ld r20, -216(%r1)
+ cmpwi r20, 0x2020
+ bne 1f
+ ld r21, -224(%r1)
+ cmpwi r21, 0x2121
+ bne 1f
+ ld r22, -232(%r1)
+ cmpwi r22, 0x2222
+ bne 1f
+ ld r23, -240(%r1)
+ cmpwi r23, 0x2323
+ bne 1f
+ ld r24, -248(%r1)
+ cmpwi r24, 0x2424
+ bne 1f
+ ld r25, -256(%r1)
+ cmpwi r25, 0x2525
+ bne 1f
+ ld r26, -264(%r1)
+ cmpwi r26, 0x2626
+ bne 1f
+ ld r27, -272(%r1)
+ cmpwi r27, 0x2727
+ bne 1f
+ ld r28, -280(%r1)
+ cmpwi r28, 0x2828
+ bne 1f
+ ld r29, -288(%r1)
+ cmpwi r29, 0x2929
+ bne 1f
+
+ /* Load 0 (success) to return */
+ li r3, 0
+
+1: ld r14, 160(%r1)
+ ld r15, 152(%r1)
+ ld r16, 144(%r1)
+ ld r17, 136(%r1)
+ ld r18, 128(%r1)
+ ld r19, 120(%r1)
+ ld r20, 112(%r1)
+ ld r21, 104(%r1)
+ ld r22, 96(%r1)
+ ld r23, 88(%r1)
+ ld r24, 80(%r1)
+ ld r25, 72(%r1)
+ ld r26, 64(%r1)
+ ld r27, 56(%r1)
+ ld r28, 48(%r1)
+ ld r29, 40(%r1)
+ ld r30, 32(%r1)
+ ld r31, 24(%r1)
+ addi %r1, %r1, 168
+ blr
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/close_clears_pmcc_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/close_clears_pmcc_test.c
new file mode 100644
index 000000000..0f0423dba
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/close_clears_pmcc_test.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <setjmp.h>
+#include <signal.h>
+
+#include "ebb.h"
+
+
+/*
+ * Test that closing the EBB event clears MMCR0_PMCC, preventing further access
+ * by userspace to the PMU hardware.
+ */
+
+int close_clears_pmcc(void)
+{
+ struct event event;
+
+ event_init_named(&event, 0x1001e, "cycles");
+ event_leader_ebb_init(&event);
+
+ FAIL_IF(event_open(&event));
+
+ ebb_enable_pmc_counting(1);
+ setup_ebb_handler(standard_ebb_callee);
+ ebb_global_enable();
+ FAIL_IF(ebb_event_enable(&event));
+
+ mtspr(SPRN_PMC1, pmc_sample_period(sample_period));
+
+ while (ebb_state.stats.ebb_count < 1)
+ FAIL_IF(core_busy_loop());
+
+ ebb_global_disable();
+ event_close(&event);
+
+ FAIL_IF(ebb_state.stats.ebb_count == 0);
+
+ /* The real test is here, do we take a SIGILL when writing PMU regs now
+ * that we have closed the event. We expect that we will. */
+
+ FAIL_IF(catch_sigill(write_pmc1));
+
+ /* We should still be able to read EBB regs though */
+ mfspr(SPRN_EBBHR);
+ mfspr(SPRN_EBBRR);
+ mfspr(SPRN_BESCR);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(close_clears_pmcc, "close_clears_pmcc");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_pinned_vs_ebb_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_pinned_vs_ebb_test.c
new file mode 100644
index 000000000..d3ed64d5d
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_pinned_vs_ebb_test.c
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <unistd.h>
+
+#include "ebb.h"
+
+
+/*
+ * Tests a pinned cpu event vs an EBB - in that order. The pinned cpu event
+ * should remain and the EBB event should fail to enable.
+ */
+
+static int setup_cpu_event(struct event *event, int cpu)
+{
+ event_init_named(event, 0x400FA, "PM_RUN_INST_CMPL");
+
+ event->attr.pinned = 1;
+
+ event->attr.exclude_kernel = 1;
+ event->attr.exclude_hv = 1;
+ event->attr.exclude_idle = 1;
+
+ SKIP_IF(require_paranoia_below(1));
+ FAIL_IF(event_open_with_cpu(event, cpu));
+ FAIL_IF(event_enable(event));
+
+ return 0;
+}
+
+int cpu_event_pinned_vs_ebb(void)
+{
+ union pipe read_pipe, write_pipe;
+ struct event event;
+ int cpu, rc;
+ pid_t pid;
+
+ cpu = pick_online_cpu();
+ FAIL_IF(cpu < 0);
+ FAIL_IF(bind_to_cpu(cpu));
+
+ FAIL_IF(pipe(read_pipe.fds) == -1);
+ FAIL_IF(pipe(write_pipe.fds) == -1);
+
+ pid = fork();
+ if (pid == 0) {
+ /* NB order of pipes looks reversed */
+ exit(ebb_child(write_pipe, read_pipe));
+ }
+
+ /* We setup the cpu event first */
+ rc = setup_cpu_event(&event, cpu);
+ if (rc) {
+ kill_child_and_wait(pid);
+ return rc;
+ }
+
+ /* Signal the child to install its EBB event and wait */
+ if (sync_with_child(read_pipe, write_pipe))
+ /* If it fails, wait for it to exit */
+ goto wait;
+
+ /* Signal the child to run */
+ FAIL_IF(sync_with_child(read_pipe, write_pipe));
+
+wait:
+ /* We expect it to fail to read the event */
+ FAIL_IF(wait_for_child(pid) != 2);
+
+ FAIL_IF(event_disable(&event));
+ FAIL_IF(event_read(&event));
+
+ event_report(&event);
+
+ /* The cpu event should have run */
+ FAIL_IF(event.result.value == 0);
+ FAIL_IF(event.result.enabled != event.result.running);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(cpu_event_pinned_vs_ebb, "cpu_event_pinned_vs_ebb");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_vs_ebb_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_vs_ebb_test.c
new file mode 100644
index 000000000..8b972c2aa
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/cpu_event_vs_ebb_test.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <unistd.h>
+
+#include "ebb.h"
+
+
+/*
+ * Tests a cpu event vs an EBB - in that order. The EBB should force the cpu
+ * event off the PMU.
+ */
+
+static int setup_cpu_event(struct event *event, int cpu)
+{
+ event_init_named(event, 0x400FA, "PM_RUN_INST_CMPL");
+
+ event->attr.exclude_kernel = 1;
+ event->attr.exclude_hv = 1;
+ event->attr.exclude_idle = 1;
+
+ SKIP_IF(require_paranoia_below(1));
+ FAIL_IF(event_open_with_cpu(event, cpu));
+ FAIL_IF(event_enable(event));
+
+ return 0;
+}
+
+int cpu_event_vs_ebb(void)
+{
+ union pipe read_pipe, write_pipe;
+ struct event event;
+ int cpu, rc;
+ pid_t pid;
+
+ cpu = pick_online_cpu();
+ FAIL_IF(cpu < 0);
+ FAIL_IF(bind_to_cpu(cpu));
+
+ FAIL_IF(pipe(read_pipe.fds) == -1);
+ FAIL_IF(pipe(write_pipe.fds) == -1);
+
+ pid = fork();
+ if (pid == 0) {
+ /* NB order of pipes looks reversed */
+ exit(ebb_child(write_pipe, read_pipe));
+ }
+
+ /* We setup the cpu event first */
+ rc = setup_cpu_event(&event, cpu);
+ if (rc) {
+ kill_child_and_wait(pid);
+ return rc;
+ }
+
+ /* Signal the child to install its EBB event and wait */
+ if (sync_with_child(read_pipe, write_pipe))
+ /* If it fails, wait for it to exit */
+ goto wait;
+
+ /* Signal the child to run */
+ FAIL_IF(sync_with_child(read_pipe, write_pipe));
+
+wait:
+ /* We expect the child to succeed */
+ FAIL_IF(wait_for_child(pid));
+
+ FAIL_IF(event_disable(&event));
+ FAIL_IF(event_read(&event));
+
+ event_report(&event);
+
+ /* The cpu event may have run */
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(cpu_event_vs_ebb, "cpu_event_vs_ebb");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/cycles_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/cycles_test.c
new file mode 100644
index 000000000..8590fc1bf
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/cycles_test.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "ebb.h"
+
+
+/*
+ * Basic test that counts user cycles and takes EBBs.
+ */
+int cycles(void)
+{
+ struct event event;
+
+ event_init_named(&event, 0x1001e, "cycles");
+ event_leader_ebb_init(&event);
+
+ event.attr.exclude_kernel = 1;
+ event.attr.exclude_hv = 1;
+ event.attr.exclude_idle = 1;
+
+ FAIL_IF(event_open(&event));
+
+ ebb_enable_pmc_counting(1);
+ setup_ebb_handler(standard_ebb_callee);
+ ebb_global_enable();
+ FAIL_IF(ebb_event_enable(&event));
+
+ mtspr(SPRN_PMC1, pmc_sample_period(sample_period));
+
+ while (ebb_state.stats.ebb_count < 10) {
+ FAIL_IF(core_busy_loop());
+ FAIL_IF(ebb_check_mmcr0());
+ }
+
+ ebb_global_disable();
+ ebb_freeze_pmcs();
+
+ count_pmc(1, sample_period);
+
+ dump_ebb_state();
+
+ event_close(&event);
+
+ FAIL_IF(ebb_state.stats.ebb_count == 0);
+ FAIL_IF(!ebb_check_count(1, sample_period, 100));
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(cycles, "cycles");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_freeze_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_freeze_test.c
new file mode 100644
index 000000000..754b3f200
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_freeze_test.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+
+#include "ebb.h"
+
+
+/*
+ * Test of counting cycles while using MMCR0_FC (freeze counters) to only count
+ * parts of the code. This is complicated by the fact that FC is set by the
+ * hardware when the event overflows. We may take the EBB after we have set FC,
+ * so we have to be careful about whether we clear FC at the end of the EBB
+ * handler or not.
+ */
+
+static bool counters_frozen = false;
+static int ebbs_while_frozen = 0;
+
+static void ebb_callee(void)
+{
+ uint64_t mask, val;
+
+ mask = MMCR0_PMAO | MMCR0_FC;
+
+ val = mfspr(SPRN_BESCR);
+ if (!(val & BESCR_PMEO)) {
+ ebb_state.stats.spurious++;
+ goto out;
+ }
+
+ ebb_state.stats.ebb_count++;
+ trace_log_counter(ebb_state.trace, ebb_state.stats.ebb_count);
+
+ val = mfspr(SPRN_MMCR0);
+ trace_log_reg(ebb_state.trace, SPRN_MMCR0, val);
+
+ if (counters_frozen) {
+ trace_log_string(ebb_state.trace, "frozen");
+ ebbs_while_frozen++;
+ mask &= ~MMCR0_FC;
+ }
+
+ count_pmc(1, sample_period);
+out:
+ reset_ebb_with_clear_mask(mask);
+}
+
+int cycles_with_freeze(void)
+{
+ struct event event;
+ uint64_t val;
+ bool fc_cleared;
+
+ event_init_named(&event, 0x1001e, "cycles");
+ event_leader_ebb_init(&event);
+
+ event.attr.exclude_kernel = 1;
+ event.attr.exclude_hv = 1;
+ event.attr.exclude_idle = 1;
+
+ FAIL_IF(event_open(&event));
+
+ setup_ebb_handler(ebb_callee);
+ ebb_global_enable();
+ FAIL_IF(ebb_event_enable(&event));
+
+ mtspr(SPRN_PMC1, pmc_sample_period(sample_period));
+
+ fc_cleared = false;
+
+ /* Make sure we loop until we take at least one EBB */
+ while ((ebb_state.stats.ebb_count < 20 && !fc_cleared) ||
+ ebb_state.stats.ebb_count < 1)
+ {
+ counters_frozen = false;
+ mb();
+ mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) & ~MMCR0_FC);
+
+ FAIL_IF(core_busy_loop());
+
+ counters_frozen = true;
+ mb();
+ mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) | MMCR0_FC);
+
+ val = mfspr(SPRN_MMCR0);
+ if (! (val & MMCR0_FC)) {
+ printf("Outside of loop, FC NOT set MMCR0 0x%lx\n", val);
+ fc_cleared = true;
+ }
+ }
+
+ ebb_global_disable();
+ ebb_freeze_pmcs();
+
+ count_pmc(1, sample_period);
+
+ dump_ebb_state();
+
+ printf("EBBs while frozen %d\n", ebbs_while_frozen);
+
+ event_close(&event);
+
+ FAIL_IF(ebb_state.stats.ebb_count == 0);
+ FAIL_IF(fc_cleared);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(cycles_with_freeze, "cycles_with_freeze");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c
new file mode 100644
index 000000000..d43029b08
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/cycles_with_mmcr2_test.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+
+#include "ebb.h"
+
+
+/*
+ * Test of counting cycles while manipulating the user accessible bits in MMCR2.
+ */
+
+/* We use two values because the first freezes PMC1 and so we would get no EBBs */
+#define MMCR2_EXPECTED_1 0x4020100804020000UL /* (FC1P|FC2P|FC3P|FC4P|FC5P|FC6P) */
+#define MMCR2_EXPECTED_2 0x0020100804020000UL /* ( FC2P|FC3P|FC4P|FC5P|FC6P) */
+
+
+int cycles_with_mmcr2(void)
+{
+ struct event event;
+ uint64_t val, expected[2], actual;
+ int i;
+ bool bad_mmcr2;
+
+ event_init_named(&event, 0x1001e, "cycles");
+ event_leader_ebb_init(&event);
+
+ event.attr.exclude_kernel = 1;
+ event.attr.exclude_hv = 1;
+ event.attr.exclude_idle = 1;
+
+ FAIL_IF(event_open(&event));
+
+ ebb_enable_pmc_counting(1);
+ setup_ebb_handler(standard_ebb_callee);
+ ebb_global_enable();
+
+ FAIL_IF(ebb_event_enable(&event));
+
+ mtspr(SPRN_PMC1, pmc_sample_period(sample_period));
+
+ /* XXX Set of MMCR2 must be after enable */
+ expected[0] = MMCR2_EXPECTED_1;
+ expected[1] = MMCR2_EXPECTED_2;
+ i = 0;
+ bad_mmcr2 = false;
+
+ /* Make sure we loop until we take at least one EBB */
+ while ((ebb_state.stats.ebb_count < 20 && !bad_mmcr2) ||
+ ebb_state.stats.ebb_count < 1)
+ {
+ mtspr(SPRN_MMCR2, expected[i % 2]);
+
+ FAIL_IF(core_busy_loop());
+
+ val = mfspr(SPRN_MMCR2);
+ if (val != expected[i % 2]) {
+ bad_mmcr2 = true;
+ actual = val;
+ }
+
+ i++;
+ }
+
+ ebb_global_disable();
+ ebb_freeze_pmcs();
+
+ count_pmc(1, sample_period);
+
+ dump_ebb_state();
+
+ event_close(&event);
+
+ FAIL_IF(ebb_state.stats.ebb_count == 0);
+
+ if (bad_mmcr2)
+ printf("Bad MMCR2 value seen is 0x%lx\n", actual);
+
+ FAIL_IF(bad_mmcr2);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(cycles_with_mmcr2, "cycles_with_mmcr2");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb.c
new file mode 100644
index 000000000..d7a72ce69
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb.c
@@ -0,0 +1,478 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#define _GNU_SOURCE /* For CPU_ZERO etc. */
+
+#include <sched.h>
+#include <sys/wait.h>
+#include <setjmp.h>
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/ioctl.h>
+
+#include "trace.h"
+#include "reg.h"
+#include "ebb.h"
+
+
+void (*ebb_user_func)(void);
+
+void ebb_hook(void)
+{
+ if (ebb_user_func)
+ ebb_user_func();
+}
+
+struct ebb_state ebb_state;
+
+u64 sample_period = 0x40000000ull;
+
+void reset_ebb_with_clear_mask(unsigned long mmcr0_clear_mask)
+{
+ u64 val;
+
+ /* 2) clear MMCR0[PMAO] - docs say BESCR[PMEO] should do this */
+ /* 3) set MMCR0[PMAE] - docs say BESCR[PME] should do this */
+ val = mfspr(SPRN_MMCR0);
+ mtspr(SPRN_MMCR0, (val & ~mmcr0_clear_mask) | MMCR0_PMAE);
+
+ /* 4) clear BESCR[PMEO] */
+ mtspr(SPRN_BESCRR, BESCR_PMEO);
+
+ /* 5) set BESCR[PME] */
+ mtspr(SPRN_BESCRS, BESCR_PME);
+
+ /* 6) rfebb 1 - done in our caller */
+}
+
+void reset_ebb(void)
+{
+ reset_ebb_with_clear_mask(MMCR0_PMAO | MMCR0_FC);
+}
+
+/* Called outside of the EBB handler to check MMCR0 is sane */
+int ebb_check_mmcr0(void)
+{
+ u64 val;
+
+ val = mfspr(SPRN_MMCR0);
+ if ((val & (MMCR0_FC | MMCR0_PMAO)) == MMCR0_FC) {
+ /* It's OK if we see FC & PMAO, but not FC by itself */
+ printf("Outside of loop, only FC set 0x%llx\n", val);
+ return 1;
+ }
+
+ return 0;
+}
+
+bool ebb_check_count(int pmc, u64 sample_period, int fudge)
+{
+ u64 count, upper, lower;
+
+ count = ebb_state.stats.pmc_count[PMC_INDEX(pmc)];
+
+ lower = ebb_state.stats.ebb_count * (sample_period - fudge);
+
+ if (count < lower) {
+ printf("PMC%d count (0x%llx) below lower limit 0x%llx (-0x%llx)\n",
+ pmc, count, lower, lower - count);
+ return false;
+ }
+
+ upper = ebb_state.stats.ebb_count * (sample_period + fudge);
+
+ if (count > upper) {
+ printf("PMC%d count (0x%llx) above upper limit 0x%llx (+0x%llx)\n",
+ pmc, count, upper, count - upper);
+ return false;
+ }
+
+ printf("PMC%d count (0x%llx) is between 0x%llx and 0x%llx delta +0x%llx/-0x%llx\n",
+ pmc, count, lower, upper, count - lower, upper - count);
+
+ return true;
+}
+
+void standard_ebb_callee(void)
+{
+ int found, i;
+ u64 val;
+
+ val = mfspr(SPRN_BESCR);
+ if (!(val & BESCR_PMEO)) {
+ ebb_state.stats.spurious++;
+ goto out;
+ }
+
+ ebb_state.stats.ebb_count++;
+ trace_log_counter(ebb_state.trace, ebb_state.stats.ebb_count);
+
+ val = mfspr(SPRN_MMCR0);
+ trace_log_reg(ebb_state.trace, SPRN_MMCR0, val);
+
+ found = 0;
+ for (i = 1; i <= 6; i++) {
+ if (ebb_state.pmc_enable[PMC_INDEX(i)])
+ found += count_pmc(i, sample_period);
+ }
+
+ if (!found)
+ ebb_state.stats.no_overflow++;
+
+out:
+ reset_ebb();
+}
+
+extern void ebb_handler(void);
+
+void setup_ebb_handler(void (*callee)(void))
+{
+ u64 entry;
+
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+ entry = (u64)ebb_handler;
+#else
+ struct opd
+ {
+ u64 entry;
+ u64 toc;
+ } *opd;
+
+ opd = (struct opd *)ebb_handler;
+ entry = opd->entry;
+#endif
+ printf("EBB Handler is at %#llx\n", entry);
+
+ ebb_user_func = callee;
+
+ /* Ensure ebb_user_func is set before we set the handler */
+ mb();
+ mtspr(SPRN_EBBHR, entry);
+
+ /* Make sure the handler is set before we return */
+ mb();
+}
+
+void clear_ebb_stats(void)
+{
+ memset(&ebb_state.stats, 0, sizeof(ebb_state.stats));
+}
+
+void dump_summary_ebb_state(void)
+{
+ printf("ebb_state:\n" \
+ " ebb_count = %d\n" \
+ " spurious = %d\n" \
+ " negative = %d\n" \
+ " no_overflow = %d\n" \
+ " pmc[1] count = 0x%llx\n" \
+ " pmc[2] count = 0x%llx\n" \
+ " pmc[3] count = 0x%llx\n" \
+ " pmc[4] count = 0x%llx\n" \
+ " pmc[5] count = 0x%llx\n" \
+ " pmc[6] count = 0x%llx\n",
+ ebb_state.stats.ebb_count, ebb_state.stats.spurious,
+ ebb_state.stats.negative, ebb_state.stats.no_overflow,
+ ebb_state.stats.pmc_count[0], ebb_state.stats.pmc_count[1],
+ ebb_state.stats.pmc_count[2], ebb_state.stats.pmc_count[3],
+ ebb_state.stats.pmc_count[4], ebb_state.stats.pmc_count[5]);
+}
+
+static char *decode_mmcr0(u32 value)
+{
+ static char buf[16];
+
+ buf[0] = '\0';
+
+ if (value & (1 << 31))
+ strcat(buf, "FC ");
+ if (value & (1 << 26))
+ strcat(buf, "PMAE ");
+ if (value & (1 << 7))
+ strcat(buf, "PMAO ");
+
+ return buf;
+}
+
+static char *decode_bescr(u64 value)
+{
+ static char buf[16];
+
+ buf[0] = '\0';
+
+ if (value & (1ull << 63))
+ strcat(buf, "GE ");
+ if (value & (1ull << 32))
+ strcat(buf, "PMAE ");
+ if (value & 1)
+ strcat(buf, "PMAO ");
+
+ return buf;
+}
+
+void dump_ebb_hw_state(void)
+{
+ u64 bescr;
+ u32 mmcr0;
+
+ mmcr0 = mfspr(SPRN_MMCR0);
+ bescr = mfspr(SPRN_BESCR);
+
+ printf("HW state:\n" \
+ "MMCR0 0x%016x %s\n" \
+ "MMCR2 0x%016lx\n" \
+ "EBBHR 0x%016lx\n" \
+ "BESCR 0x%016llx %s\n" \
+ "PMC1 0x%016lx\n" \
+ "PMC2 0x%016lx\n" \
+ "PMC3 0x%016lx\n" \
+ "PMC4 0x%016lx\n" \
+ "PMC5 0x%016lx\n" \
+ "PMC6 0x%016lx\n" \
+ "SIAR 0x%016lx\n",
+ mmcr0, decode_mmcr0(mmcr0), mfspr(SPRN_MMCR2),
+ mfspr(SPRN_EBBHR), bescr, decode_bescr(bescr),
+ mfspr(SPRN_PMC1), mfspr(SPRN_PMC2), mfspr(SPRN_PMC3),
+ mfspr(SPRN_PMC4), mfspr(SPRN_PMC5), mfspr(SPRN_PMC6),
+ mfspr(SPRN_SIAR));
+}
+
+void dump_ebb_state(void)
+{
+ dump_summary_ebb_state();
+
+ dump_ebb_hw_state();
+
+ trace_buffer_print(ebb_state.trace);
+}
+
+int count_pmc(int pmc, uint32_t sample_period)
+{
+ uint32_t start_value;
+ u64 val;
+
+ /* 0) Read PMC */
+ start_value = pmc_sample_period(sample_period);
+
+ val = read_pmc(pmc);
+ if (val < start_value)
+ ebb_state.stats.negative++;
+ else
+ ebb_state.stats.pmc_count[PMC_INDEX(pmc)] += val - start_value;
+
+ trace_log_reg(ebb_state.trace, SPRN_PMC1 + pmc - 1, val);
+
+ /* 1) Reset PMC */
+ write_pmc(pmc, start_value);
+
+ /* Report if we overflowed */
+ return val >= COUNTER_OVERFLOW;
+}
+
+int ebb_event_enable(struct event *e)
+{
+ int rc;
+
+ /* Ensure any SPR writes are ordered vs us */
+ mb();
+
+ rc = ioctl(e->fd, PERF_EVENT_IOC_ENABLE);
+ if (rc)
+ return rc;
+
+ rc = event_read(e);
+
+ /* Ditto */
+ mb();
+
+ return rc;
+}
+
+void ebb_freeze_pmcs(void)
+{
+ mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) | MMCR0_FC);
+ mb();
+}
+
+void ebb_unfreeze_pmcs(void)
+{
+ /* Unfreeze counters */
+ mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) & ~MMCR0_FC);
+ mb();
+}
+
+void ebb_global_enable(void)
+{
+ /* Enable EBBs globally and PMU EBBs */
+ mtspr(SPRN_BESCR, 0x8000000100000000ull);
+ mb();
+}
+
+void ebb_global_disable(void)
+{
+ /* Disable EBBs & freeze counters, events are still scheduled */
+ mtspr(SPRN_BESCRR, BESCR_PME);
+ mb();
+}
+
+void event_ebb_init(struct event *e)
+{
+ e->attr.config |= (1ull << 63);
+}
+
+void event_bhrb_init(struct event *e, unsigned ifm)
+{
+ e->attr.config |= (1ull << 62) | ((u64)ifm << 60);
+}
+
+void event_leader_ebb_init(struct event *e)
+{
+ event_ebb_init(e);
+
+ e->attr.exclusive = 1;
+ e->attr.pinned = 1;
+}
+
+int ebb_child(union pipe read_pipe, union pipe write_pipe)
+{
+ struct event event;
+ uint64_t val;
+
+ FAIL_IF(wait_for_parent(read_pipe));
+
+ event_init_named(&event, 0x1001e, "cycles");
+ event_leader_ebb_init(&event);
+
+ event.attr.exclude_kernel = 1;
+ event.attr.exclude_hv = 1;
+ event.attr.exclude_idle = 1;
+
+ FAIL_IF(event_open(&event));
+
+ ebb_enable_pmc_counting(1);
+ setup_ebb_handler(standard_ebb_callee);
+ ebb_global_enable();
+
+ FAIL_IF(event_enable(&event));
+
+ if (event_read(&event)) {
+ /*
+ * Some tests expect to fail here, so don't report an error on
+ * this line, and return a distinguisable error code. Tell the
+ * parent an error happened.
+ */
+ notify_parent_of_error(write_pipe);
+ return 2;
+ }
+
+ mtspr(SPRN_PMC1, pmc_sample_period(sample_period));
+
+ FAIL_IF(notify_parent(write_pipe));
+ FAIL_IF(wait_for_parent(read_pipe));
+ FAIL_IF(notify_parent(write_pipe));
+
+ while (ebb_state.stats.ebb_count < 20) {
+ FAIL_IF(core_busy_loop());
+
+ /* To try and hit SIGILL case */
+ val = mfspr(SPRN_MMCRA);
+ val |= mfspr(SPRN_MMCR2);
+ val |= mfspr(SPRN_MMCR0);
+ }
+
+ ebb_global_disable();
+ ebb_freeze_pmcs();
+
+ count_pmc(1, sample_period);
+
+ dump_ebb_state();
+
+ event_close(&event);
+
+ FAIL_IF(ebb_state.stats.ebb_count == 0);
+
+ return 0;
+}
+
+static jmp_buf setjmp_env;
+
+static void sigill_handler(int signal)
+{
+ printf("Took sigill\n");
+ longjmp(setjmp_env, 1);
+}
+
+static struct sigaction sigill_action = {
+ .sa_handler = sigill_handler,
+};
+
+int catch_sigill(void (*func)(void))
+{
+ if (sigaction(SIGILL, &sigill_action, NULL)) {
+ perror("sigaction");
+ return 1;
+ }
+
+ if (setjmp(setjmp_env) == 0) {
+ func();
+ return 1;
+ }
+
+ return 0;
+}
+
+void write_pmc1(void)
+{
+ mtspr(SPRN_PMC1, 0);
+}
+
+void write_pmc(int pmc, u64 value)
+{
+ switch (pmc) {
+ case 1: mtspr(SPRN_PMC1, value); break;
+ case 2: mtspr(SPRN_PMC2, value); break;
+ case 3: mtspr(SPRN_PMC3, value); break;
+ case 4: mtspr(SPRN_PMC4, value); break;
+ case 5: mtspr(SPRN_PMC5, value); break;
+ case 6: mtspr(SPRN_PMC6, value); break;
+ }
+}
+
+u64 read_pmc(int pmc)
+{
+ switch (pmc) {
+ case 1: return mfspr(SPRN_PMC1);
+ case 2: return mfspr(SPRN_PMC2);
+ case 3: return mfspr(SPRN_PMC3);
+ case 4: return mfspr(SPRN_PMC4);
+ case 5: return mfspr(SPRN_PMC5);
+ case 6: return mfspr(SPRN_PMC6);
+ }
+
+ return 0;
+}
+
+static void term_handler(int signal)
+{
+ dump_summary_ebb_state();
+ dump_ebb_hw_state();
+ abort();
+}
+
+struct sigaction term_action = {
+ .sa_handler = term_handler,
+};
+
+static void __attribute__((constructor)) ebb_init(void)
+{
+ clear_ebb_stats();
+
+ if (sigaction(SIGTERM, &term_action, NULL))
+ perror("sigaction");
+
+ ebb_state.trace = trace_buffer_allocate(1 * 1024 * 1024);
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb.h b/kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb.h
new file mode 100644
index 000000000..e44eee5d9
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#ifndef _SELFTESTS_POWERPC_PMU_EBB_EBB_H
+#define _SELFTESTS_POWERPC_PMU_EBB_EBB_H
+
+#include "../event.h"
+#include "../lib.h"
+#include "trace.h"
+#include "reg.h"
+
+#define PMC_INDEX(pmc) ((pmc)-1)
+
+#define NUM_PMC_VALUES 128
+
+struct ebb_state
+{
+ struct {
+ u64 pmc_count[6];
+ volatile int ebb_count;
+ int spurious;
+ int negative;
+ int no_overflow;
+ } stats;
+
+ bool pmc_enable[6];
+ struct trace_buffer *trace;
+};
+
+extern struct ebb_state ebb_state;
+
+#define COUNTER_OVERFLOW 0x80000000ull
+
+static inline uint32_t pmc_sample_period(uint32_t value)
+{
+ return COUNTER_OVERFLOW - value;
+}
+
+static inline void ebb_enable_pmc_counting(int pmc)
+{
+ ebb_state.pmc_enable[PMC_INDEX(pmc)] = true;
+}
+
+bool ebb_check_count(int pmc, u64 sample_period, int fudge);
+void event_leader_ebb_init(struct event *e);
+void event_ebb_init(struct event *e);
+void event_bhrb_init(struct event *e, unsigned ifm);
+void setup_ebb_handler(void (*callee)(void));
+void standard_ebb_callee(void);
+int ebb_event_enable(struct event *e);
+void ebb_global_enable(void);
+void ebb_global_disable(void);
+void ebb_freeze_pmcs(void);
+void ebb_unfreeze_pmcs(void);
+void event_ebb_init(struct event *e);
+void event_leader_ebb_init(struct event *e);
+int count_pmc(int pmc, uint32_t sample_period);
+void dump_ebb_state(void);
+void dump_summary_ebb_state(void);
+void dump_ebb_hw_state(void);
+void clear_ebb_stats(void);
+void write_pmc(int pmc, u64 value);
+u64 read_pmc(int pmc);
+void reset_ebb_with_clear_mask(unsigned long mmcr0_clear_mask);
+void reset_ebb(void);
+int ebb_check_mmcr0(void);
+
+extern u64 sample_period;
+
+int core_busy_loop(void);
+int ebb_child(union pipe read_pipe, union pipe write_pipe);
+int catch_sigill(void (*func)(void));
+void write_pmc1(void);
+
+#endif /* _SELFTESTS_POWERPC_PMU_EBB_EBB_H */
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb_handler.S b/kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb_handler.S
new file mode 100644
index 000000000..14274ea20
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb_handler.S
@@ -0,0 +1,365 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <ppc-asm.h>
+#include "reg.h"
+
+
+/* ppc-asm.h defines most of the reg aliases, but not r1/r2. */
+#define r1 1
+#define r2 2
+
+#define RFEBB .long 0x4c000924
+
+/* Stack layout:
+ *
+ * ^
+ * User stack |
+ * Back chain ------+ <- r1 <-------+
+ * ... |
+ * Red zone / ABI Gap |
+ * ... |
+ * vr63 <+ |
+ * vr0 | |
+ * VSCR | |
+ * FSCR | |
+ * r31 | Save area |
+ * r0 | |
+ * XER | |
+ * CTR | |
+ * LR | |
+ * CCR <+ |
+ * ... <+ |
+ * LR | Caller frame |
+ * CCR | |
+ * Back chain <+ <- updated r1 --------+
+ *
+ */
+
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+#define ABIGAP 512
+#else
+#define ABIGAP 288
+#endif
+
+#define NR_GPR 32
+#define NR_SPR 6
+#define NR_VSR 64
+
+#define SAVE_AREA ((NR_GPR + NR_SPR) * 8 + (NR_VSR * 16))
+#define CALLER_FRAME 112
+
+#define STACK_FRAME (ABIGAP + SAVE_AREA + CALLER_FRAME)
+
+#define CCR_SAVE (CALLER_FRAME)
+#define LR_SAVE (CCR_SAVE + 8)
+#define CTR_SAVE (LR_SAVE + 8)
+#define XER_SAVE (CTR_SAVE + 8)
+#define GPR_SAVE(n) (XER_SAVE + 8 + (8 * n))
+#define FSCR_SAVE (GPR_SAVE(31) + 8)
+#define VSCR_SAVE (FSCR_SAVE + 8)
+#define VSR_SAVE(n) (VSCR_SAVE + 8 + (16 * n))
+
+#define SAVE_GPR(n) std n,GPR_SAVE(n)(r1)
+#define REST_GPR(n) ld n,GPR_SAVE(n)(r1)
+#define TRASH_GPR(n) lis n,0xaaaa
+
+#define SAVE_VSR(n, b) li b, VSR_SAVE(n); stxvd2x n,b,r1
+#define LOAD_VSR(n, b) li b, VSR_SAVE(n); lxvd2x n,b,r1
+
+#define LOAD_REG_IMMEDIATE(reg,expr) \
+ lis reg,(expr)@highest; \
+ ori reg,reg,(expr)@higher; \
+ rldicr reg,reg,32,31; \
+ oris reg,reg,(expr)@h; \
+ ori reg,reg,(expr)@l;
+
+
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+#define ENTRY_POINT(name) \
+ .type FUNC_NAME(name),@function; \
+ .globl FUNC_NAME(name); \
+ FUNC_NAME(name):
+
+#define RESTORE_TOC(name) \
+ /* Restore our TOC pointer using our entry point */ \
+ LOAD_REG_IMMEDIATE(r12, name) \
+0: addis r2,r12,(.TOC.-0b)@ha; \
+ addi r2,r2,(.TOC.-0b)@l;
+
+#else
+#define ENTRY_POINT(name) FUNC_START(name)
+#define RESTORE_TOC(name) \
+ /* Restore our TOC pointer via our opd entry */ \
+ LOAD_REG_IMMEDIATE(r2, name) \
+ ld r2,8(r2);
+#endif
+
+ .text
+
+ENTRY_POINT(ebb_handler)
+ stdu r1,-STACK_FRAME(r1)
+ SAVE_GPR(0)
+ mflr r0
+ std r0,LR_SAVE(r1)
+ mfcr r0
+ std r0,CCR_SAVE(r1)
+ mfctr r0
+ std r0,CTR_SAVE(r1)
+ mfxer r0
+ std r0,XER_SAVE(r1)
+ SAVE_GPR(2)
+ SAVE_GPR(3)
+ SAVE_GPR(4)
+ SAVE_GPR(5)
+ SAVE_GPR(6)
+ SAVE_GPR(7)
+ SAVE_GPR(8)
+ SAVE_GPR(9)
+ SAVE_GPR(10)
+ SAVE_GPR(11)
+ SAVE_GPR(12)
+ SAVE_GPR(13)
+ SAVE_GPR(14)
+ SAVE_GPR(15)
+ SAVE_GPR(16)
+ SAVE_GPR(17)
+ SAVE_GPR(18)
+ SAVE_GPR(19)
+ SAVE_GPR(20)
+ SAVE_GPR(21)
+ SAVE_GPR(22)
+ SAVE_GPR(23)
+ SAVE_GPR(24)
+ SAVE_GPR(25)
+ SAVE_GPR(26)
+ SAVE_GPR(27)
+ SAVE_GPR(28)
+ SAVE_GPR(29)
+ SAVE_GPR(30)
+ SAVE_GPR(31)
+ SAVE_VSR(0, r3)
+ mffs f0
+ stfd f0, FSCR_SAVE(r1)
+ mfvscr f0
+ stfd f0, VSCR_SAVE(r1)
+ SAVE_VSR(1, r3)
+ SAVE_VSR(2, r3)
+ SAVE_VSR(3, r3)
+ SAVE_VSR(4, r3)
+ SAVE_VSR(5, r3)
+ SAVE_VSR(6, r3)
+ SAVE_VSR(7, r3)
+ SAVE_VSR(8, r3)
+ SAVE_VSR(9, r3)
+ SAVE_VSR(10, r3)
+ SAVE_VSR(11, r3)
+ SAVE_VSR(12, r3)
+ SAVE_VSR(13, r3)
+ SAVE_VSR(14, r3)
+ SAVE_VSR(15, r3)
+ SAVE_VSR(16, r3)
+ SAVE_VSR(17, r3)
+ SAVE_VSR(18, r3)
+ SAVE_VSR(19, r3)
+ SAVE_VSR(20, r3)
+ SAVE_VSR(21, r3)
+ SAVE_VSR(22, r3)
+ SAVE_VSR(23, r3)
+ SAVE_VSR(24, r3)
+ SAVE_VSR(25, r3)
+ SAVE_VSR(26, r3)
+ SAVE_VSR(27, r3)
+ SAVE_VSR(28, r3)
+ SAVE_VSR(29, r3)
+ SAVE_VSR(30, r3)
+ SAVE_VSR(31, r3)
+ SAVE_VSR(32, r3)
+ SAVE_VSR(33, r3)
+ SAVE_VSR(34, r3)
+ SAVE_VSR(35, r3)
+ SAVE_VSR(36, r3)
+ SAVE_VSR(37, r3)
+ SAVE_VSR(38, r3)
+ SAVE_VSR(39, r3)
+ SAVE_VSR(40, r3)
+ SAVE_VSR(41, r3)
+ SAVE_VSR(42, r3)
+ SAVE_VSR(43, r3)
+ SAVE_VSR(44, r3)
+ SAVE_VSR(45, r3)
+ SAVE_VSR(46, r3)
+ SAVE_VSR(47, r3)
+ SAVE_VSR(48, r3)
+ SAVE_VSR(49, r3)
+ SAVE_VSR(50, r3)
+ SAVE_VSR(51, r3)
+ SAVE_VSR(52, r3)
+ SAVE_VSR(53, r3)
+ SAVE_VSR(54, r3)
+ SAVE_VSR(55, r3)
+ SAVE_VSR(56, r3)
+ SAVE_VSR(57, r3)
+ SAVE_VSR(58, r3)
+ SAVE_VSR(59, r3)
+ SAVE_VSR(60, r3)
+ SAVE_VSR(61, r3)
+ SAVE_VSR(62, r3)
+ SAVE_VSR(63, r3)
+
+ TRASH_GPR(2)
+ TRASH_GPR(3)
+ TRASH_GPR(4)
+ TRASH_GPR(5)
+ TRASH_GPR(6)
+ TRASH_GPR(7)
+ TRASH_GPR(8)
+ TRASH_GPR(9)
+ TRASH_GPR(10)
+ TRASH_GPR(11)
+ TRASH_GPR(12)
+ TRASH_GPR(14)
+ TRASH_GPR(15)
+ TRASH_GPR(16)
+ TRASH_GPR(17)
+ TRASH_GPR(18)
+ TRASH_GPR(19)
+ TRASH_GPR(20)
+ TRASH_GPR(21)
+ TRASH_GPR(22)
+ TRASH_GPR(23)
+ TRASH_GPR(24)
+ TRASH_GPR(25)
+ TRASH_GPR(26)
+ TRASH_GPR(27)
+ TRASH_GPR(28)
+ TRASH_GPR(29)
+ TRASH_GPR(30)
+ TRASH_GPR(31)
+
+ RESTORE_TOC(ebb_handler)
+
+ /*
+ * r13 is our TLS pointer. We leave whatever value was in there when the
+ * EBB fired. That seems to be OK because once set the TLS pointer is not
+ * changed - but presumably that could change in future.
+ */
+
+ bl ebb_hook
+ nop
+
+ /* r2 may be changed here but we don't care */
+
+ lfd f0, FSCR_SAVE(r1)
+ mtfsf 0xff,f0
+ lfd f0, VSCR_SAVE(r1)
+ mtvscr f0
+ LOAD_VSR(0, r3)
+ LOAD_VSR(1, r3)
+ LOAD_VSR(2, r3)
+ LOAD_VSR(3, r3)
+ LOAD_VSR(4, r3)
+ LOAD_VSR(5, r3)
+ LOAD_VSR(6, r3)
+ LOAD_VSR(7, r3)
+ LOAD_VSR(8, r3)
+ LOAD_VSR(9, r3)
+ LOAD_VSR(10, r3)
+ LOAD_VSR(11, r3)
+ LOAD_VSR(12, r3)
+ LOAD_VSR(13, r3)
+ LOAD_VSR(14, r3)
+ LOAD_VSR(15, r3)
+ LOAD_VSR(16, r3)
+ LOAD_VSR(17, r3)
+ LOAD_VSR(18, r3)
+ LOAD_VSR(19, r3)
+ LOAD_VSR(20, r3)
+ LOAD_VSR(21, r3)
+ LOAD_VSR(22, r3)
+ LOAD_VSR(23, r3)
+ LOAD_VSR(24, r3)
+ LOAD_VSR(25, r3)
+ LOAD_VSR(26, r3)
+ LOAD_VSR(27, r3)
+ LOAD_VSR(28, r3)
+ LOAD_VSR(29, r3)
+ LOAD_VSR(30, r3)
+ LOAD_VSR(31, r3)
+ LOAD_VSR(32, r3)
+ LOAD_VSR(33, r3)
+ LOAD_VSR(34, r3)
+ LOAD_VSR(35, r3)
+ LOAD_VSR(36, r3)
+ LOAD_VSR(37, r3)
+ LOAD_VSR(38, r3)
+ LOAD_VSR(39, r3)
+ LOAD_VSR(40, r3)
+ LOAD_VSR(41, r3)
+ LOAD_VSR(42, r3)
+ LOAD_VSR(43, r3)
+ LOAD_VSR(44, r3)
+ LOAD_VSR(45, r3)
+ LOAD_VSR(46, r3)
+ LOAD_VSR(47, r3)
+ LOAD_VSR(48, r3)
+ LOAD_VSR(49, r3)
+ LOAD_VSR(50, r3)
+ LOAD_VSR(51, r3)
+ LOAD_VSR(52, r3)
+ LOAD_VSR(53, r3)
+ LOAD_VSR(54, r3)
+ LOAD_VSR(55, r3)
+ LOAD_VSR(56, r3)
+ LOAD_VSR(57, r3)
+ LOAD_VSR(58, r3)
+ LOAD_VSR(59, r3)
+ LOAD_VSR(60, r3)
+ LOAD_VSR(61, r3)
+ LOAD_VSR(62, r3)
+ LOAD_VSR(63, r3)
+
+ ld r0,XER_SAVE(r1)
+ mtxer r0
+ ld r0,CTR_SAVE(r1)
+ mtctr r0
+ ld r0,LR_SAVE(r1)
+ mtlr r0
+ ld r0,CCR_SAVE(r1)
+ mtcr r0
+ REST_GPR(0)
+ REST_GPR(2)
+ REST_GPR(3)
+ REST_GPR(4)
+ REST_GPR(5)
+ REST_GPR(6)
+ REST_GPR(7)
+ REST_GPR(8)
+ REST_GPR(9)
+ REST_GPR(10)
+ REST_GPR(11)
+ REST_GPR(12)
+ REST_GPR(13)
+ REST_GPR(14)
+ REST_GPR(15)
+ REST_GPR(16)
+ REST_GPR(17)
+ REST_GPR(18)
+ REST_GPR(19)
+ REST_GPR(20)
+ REST_GPR(21)
+ REST_GPR(22)
+ REST_GPR(23)
+ REST_GPR(24)
+ REST_GPR(25)
+ REST_GPR(26)
+ REST_GPR(27)
+ REST_GPR(28)
+ REST_GPR(29)
+ REST_GPR(30)
+ REST_GPR(31)
+ addi r1,r1,STACK_FRAME
+ RFEBB
+FUNC_END(ebb_handler)
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_child_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_child_test.c
new file mode 100644
index 000000000..c45f94814
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_child_test.c
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <unistd.h>
+
+#include "ebb.h"
+
+
+/*
+ * Tests we can setup an EBB on our child. Nothing interesting happens, because
+ * even though the event is enabled and running the child hasn't enabled the
+ * actual delivery of the EBBs.
+ */
+
+static int victim_child(union pipe read_pipe, union pipe write_pipe)
+{
+ int i;
+
+ FAIL_IF(wait_for_parent(read_pipe));
+ FAIL_IF(notify_parent(write_pipe));
+
+ /* Parent creates EBB event */
+
+ FAIL_IF(wait_for_parent(read_pipe));
+ FAIL_IF(notify_parent(write_pipe));
+
+ /* Check the EBB is enabled by writing PMC1 */
+ write_pmc1();
+
+ /* EBB event is enabled here */
+ for (i = 0; i < 1000000; i++) ;
+
+ return 0;
+}
+
+int ebb_on_child(void)
+{
+ union pipe read_pipe, write_pipe;
+ struct event event;
+ pid_t pid;
+
+ FAIL_IF(pipe(read_pipe.fds) == -1);
+ FAIL_IF(pipe(write_pipe.fds) == -1);
+
+ pid = fork();
+ if (pid == 0) {
+ /* NB order of pipes looks reversed */
+ exit(victim_child(write_pipe, read_pipe));
+ }
+
+ FAIL_IF(sync_with_child(read_pipe, write_pipe));
+
+ /* Child is running now */
+
+ event_init_named(&event, 0x1001e, "cycles");
+ event_leader_ebb_init(&event);
+
+ event.attr.exclude_kernel = 1;
+ event.attr.exclude_hv = 1;
+ event.attr.exclude_idle = 1;
+
+ FAIL_IF(event_open_with_pid(&event, pid));
+ FAIL_IF(ebb_event_enable(&event));
+
+ FAIL_IF(sync_with_child(read_pipe, write_pipe));
+
+ /* Child should just exit happily */
+ FAIL_IF(wait_for_child(pid));
+
+ event_close(&event);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(ebb_on_child, "ebb_on_child");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_willing_child_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_willing_child_test.c
new file mode 100644
index 000000000..11acf1d55
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb_on_willing_child_test.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <unistd.h>
+
+#include "ebb.h"
+
+
+/*
+ * Tests we can setup an EBB on our child. The child expects this and enables
+ * EBBs, which are then delivered to the child, even though the event is
+ * created by the parent.
+ */
+
+static int victim_child(union pipe read_pipe, union pipe write_pipe)
+{
+ FAIL_IF(wait_for_parent(read_pipe));
+
+ /* Setup our EBB handler, before the EBB event is created */
+ ebb_enable_pmc_counting(1);
+ setup_ebb_handler(standard_ebb_callee);
+ ebb_global_enable();
+
+ FAIL_IF(notify_parent(write_pipe));
+
+ while (ebb_state.stats.ebb_count < 20) {
+ FAIL_IF(core_busy_loop());
+ }
+
+ ebb_global_disable();
+ ebb_freeze_pmcs();
+
+ count_pmc(1, sample_period);
+
+ dump_ebb_state();
+
+ FAIL_IF(ebb_state.stats.ebb_count == 0);
+
+ return 0;
+}
+
+/* Tests we can setup an EBB on our child - if it's expecting it */
+int ebb_on_willing_child(void)
+{
+ union pipe read_pipe, write_pipe;
+ struct event event;
+ pid_t pid;
+
+ FAIL_IF(pipe(read_pipe.fds) == -1);
+ FAIL_IF(pipe(write_pipe.fds) == -1);
+
+ pid = fork();
+ if (pid == 0) {
+ /* NB order of pipes looks reversed */
+ exit(victim_child(write_pipe, read_pipe));
+ }
+
+ /* Signal the child to setup its EBB handler */
+ FAIL_IF(sync_with_child(read_pipe, write_pipe));
+
+ /* Child is running now */
+
+ event_init_named(&event, 0x1001e, "cycles");
+ event_leader_ebb_init(&event);
+
+ event.attr.exclude_kernel = 1;
+ event.attr.exclude_hv = 1;
+ event.attr.exclude_idle = 1;
+
+ FAIL_IF(event_open_with_pid(&event, pid));
+ FAIL_IF(ebb_event_enable(&event));
+
+ /* Child show now take EBBs and then exit */
+ FAIL_IF(wait_for_child(pid));
+
+ event_close(&event);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(ebb_on_willing_child, "ebb_on_willing_child");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb_vs_cpu_event_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb_vs_cpu_event_test.c
new file mode 100644
index 000000000..be4dd5a4e
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/ebb_vs_cpu_event_test.c
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <unistd.h>
+
+#include "ebb.h"
+
+
+/*
+ * Tests an EBB vs a cpu event - in that order. The EBB should force the cpu
+ * event off the PMU.
+ */
+
+static int setup_cpu_event(struct event *event, int cpu)
+{
+ event_init_named(event, 0x400FA, "PM_RUN_INST_CMPL");
+
+ event->attr.exclude_kernel = 1;
+ event->attr.exclude_hv = 1;
+ event->attr.exclude_idle = 1;
+
+ SKIP_IF(require_paranoia_below(1));
+ FAIL_IF(event_open_with_cpu(event, cpu));
+ FAIL_IF(event_enable(event));
+
+ return 0;
+}
+
+int ebb_vs_cpu_event(void)
+{
+ union pipe read_pipe, write_pipe;
+ struct event event;
+ int cpu, rc;
+ pid_t pid;
+
+ cpu = pick_online_cpu();
+ FAIL_IF(cpu < 0);
+ FAIL_IF(bind_to_cpu(cpu));
+
+ FAIL_IF(pipe(read_pipe.fds) == -1);
+ FAIL_IF(pipe(write_pipe.fds) == -1);
+
+ pid = fork();
+ if (pid == 0) {
+ /* NB order of pipes looks reversed */
+ exit(ebb_child(write_pipe, read_pipe));
+ }
+
+ /* Signal the child to install its EBB event and wait */
+ FAIL_IF(sync_with_child(read_pipe, write_pipe));
+
+ /* Now try to install our CPU event */
+ rc = setup_cpu_event(&event, cpu);
+ if (rc) {
+ kill_child_and_wait(pid);
+ return rc;
+ }
+
+ /* Signal the child to run */
+ FAIL_IF(sync_with_child(read_pipe, write_pipe));
+
+ /* .. and wait for it to complete */
+ FAIL_IF(wait_for_child(pid));
+ FAIL_IF(event_disable(&event));
+ FAIL_IF(event_read(&event));
+
+ event_report(&event);
+
+ /* The cpu event may have run, but we don't expect 100% */
+ FAIL_IF(event.result.enabled >= event.result.running);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(ebb_vs_cpu_event, "ebb_vs_cpu_event");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/event_attributes_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/event_attributes_test.c
new file mode 100644
index 000000000..7e78153f0
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/event_attributes_test.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "ebb.h"
+
+
+/*
+ * Test various attributes of the EBB event are enforced.
+ */
+int event_attributes(void)
+{
+ struct event event, leader;
+
+ event_init(&event, 0x1001e);
+ event_leader_ebb_init(&event);
+ /* Expected to succeed */
+ FAIL_IF(event_open(&event));
+ event_close(&event);
+
+
+ event_init(&event, 0x001e); /* CYCLES - no PMC specified */
+ event_leader_ebb_init(&event);
+ /* Expected to fail, no PMC specified */
+ FAIL_IF(event_open(&event) == 0);
+
+
+ event_init(&event, 0x2001e);
+ event_leader_ebb_init(&event);
+ event.attr.exclusive = 0;
+ /* Expected to fail, not exclusive */
+ FAIL_IF(event_open(&event) == 0);
+
+
+ event_init(&event, 0x3001e);
+ event_leader_ebb_init(&event);
+ event.attr.freq = 1;
+ /* Expected to fail, sets freq */
+ FAIL_IF(event_open(&event) == 0);
+
+
+ event_init(&event, 0x4001e);
+ event_leader_ebb_init(&event);
+ event.attr.sample_period = 1;
+ /* Expected to fail, sets sample_period */
+ FAIL_IF(event_open(&event) == 0);
+
+
+ event_init(&event, 0x1001e);
+ event_leader_ebb_init(&event);
+ event.attr.enable_on_exec = 1;
+ /* Expected to fail, sets enable_on_exec */
+ FAIL_IF(event_open(&event) == 0);
+
+
+ event_init(&event, 0x1001e);
+ event_leader_ebb_init(&event);
+ event.attr.inherit = 1;
+ /* Expected to fail, sets inherit */
+ FAIL_IF(event_open(&event) == 0);
+
+
+ event_init(&leader, 0x1001e);
+ event_leader_ebb_init(&leader);
+ FAIL_IF(event_open(&leader));
+
+ event_init(&event, 0x20002);
+ event_ebb_init(&event);
+
+ /* Expected to succeed */
+ FAIL_IF(event_open_with_group(&event, leader.fd));
+ event_close(&leader);
+ event_close(&event);
+
+
+ event_init(&leader, 0x1001e);
+ event_leader_ebb_init(&leader);
+ FAIL_IF(event_open(&leader));
+
+ event_init(&event, 0x20002);
+
+ /* Expected to fail, event doesn't request EBB, leader does */
+ FAIL_IF(event_open_with_group(&event, leader.fd) == 0);
+ event_close(&leader);
+
+
+ event_init(&leader, 0x1001e);
+ event_leader_ebb_init(&leader);
+ /* Clear the EBB flag */
+ leader.attr.config &= ~(1ull << 63);
+
+ FAIL_IF(event_open(&leader));
+
+ event_init(&event, 0x20002);
+ event_ebb_init(&event);
+
+ /* Expected to fail, leader doesn't request EBB */
+ FAIL_IF(event_open_with_group(&event, leader.fd) == 0);
+ event_close(&leader);
+
+
+ event_init(&leader, 0x1001e);
+ event_leader_ebb_init(&leader);
+ leader.attr.exclusive = 0;
+ /* Expected to fail, leader isn't exclusive */
+ FAIL_IF(event_open(&leader) == 0);
+
+
+ event_init(&leader, 0x1001e);
+ event_leader_ebb_init(&leader);
+ leader.attr.pinned = 0;
+ /* Expected to fail, leader isn't pinned */
+ FAIL_IF(event_open(&leader) == 0);
+
+ event_init(&event, 0x1001e);
+ event_leader_ebb_init(&event);
+ /* Expected to fail, not a task event */
+ SKIP_IF(require_paranoia_below(1));
+ FAIL_IF(event_open_with_cpu(&event, 0) == 0);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(event_attributes, "event_attributes");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/fixed_instruction_loop.S b/kernel/tools/testing/selftests/powerpc/pmu/ebb/fixed_instruction_loop.S
new file mode 100644
index 000000000..b866a0581
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/fixed_instruction_loop.S
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <ppc-asm.h>
+
+ .text
+
+FUNC_START(thirty_two_instruction_loop)
+ cmpwi r3,0
+ beqlr
+ addi r4,r3,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1 # 28 addi's
+ subi r3,r3,1
+ b FUNC_NAME(thirty_two_instruction_loop)
+FUNC_END(thirty_two_instruction_loop)
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/fork_cleanup_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/fork_cleanup_test.c
new file mode 100644
index 000000000..9e7af6e76
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/fork_cleanup_test.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <unistd.h>
+#include <setjmp.h>
+#include <signal.h>
+
+#include "ebb.h"
+
+
+/*
+ * Test that a fork clears the PMU state of the child. eg. BESCR/EBBHR/EBBRR
+ * are cleared, and MMCR0_PMCC is reset, preventing the child from accessing
+ * the PMU.
+ */
+
+static struct event event;
+
+static int child(void)
+{
+ /* Even though we have EBE=0 we can still see the EBB regs */
+ FAIL_IF(mfspr(SPRN_BESCR) != 0);
+ FAIL_IF(mfspr(SPRN_EBBHR) != 0);
+ FAIL_IF(mfspr(SPRN_EBBRR) != 0);
+
+ FAIL_IF(catch_sigill(write_pmc1));
+
+ /* We can still read from the event, though it is on our parent */
+ FAIL_IF(event_read(&event));
+
+ return 0;
+}
+
+/* Tests that fork clears EBB state */
+int fork_cleanup(void)
+{
+ pid_t pid;
+
+ event_init_named(&event, 0x1001e, "cycles");
+ event_leader_ebb_init(&event);
+
+ FAIL_IF(event_open(&event));
+
+ ebb_enable_pmc_counting(1);
+ setup_ebb_handler(standard_ebb_callee);
+ ebb_global_enable();
+
+ FAIL_IF(ebb_event_enable(&event));
+
+ mtspr(SPRN_MMCR0, MMCR0_FC);
+ mtspr(SPRN_PMC1, pmc_sample_period(sample_period));
+
+ /* Don't need to actually take any EBBs */
+
+ pid = fork();
+ if (pid == 0)
+ exit(child());
+
+ /* Child does the actual testing */
+ FAIL_IF(wait_for_child(pid));
+
+ /* After fork */
+ event_close(&event);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(fork_cleanup, "fork_cleanup");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/instruction_count_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/instruction_count_test.c
new file mode 100644
index 000000000..f8190fa29
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/instruction_count_test.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#define _GNU_SOURCE
+
+#include <stdio.h>
+#include <stdbool.h>
+#include <string.h>
+#include <sys/prctl.h>
+
+#include "ebb.h"
+
+
+/*
+ * Run a calibrated instruction loop and count instructions executed using
+ * EBBs. Make sure the counts look right.
+ */
+
+extern void thirty_two_instruction_loop(uint64_t loops);
+
+static bool counters_frozen = true;
+
+static int do_count_loop(struct event *event, uint64_t instructions,
+ uint64_t overhead, bool report)
+{
+ int64_t difference, expected;
+ double percentage;
+
+ clear_ebb_stats();
+
+ counters_frozen = false;
+ mb();
+ mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) & ~MMCR0_FC);
+
+ thirty_two_instruction_loop(instructions >> 5);
+
+ counters_frozen = true;
+ mb();
+ mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) | MMCR0_FC);
+
+ count_pmc(4, sample_period);
+
+ event->result.value = ebb_state.stats.pmc_count[4-1];
+ expected = instructions + overhead;
+ difference = event->result.value - expected;
+ percentage = (double)difference / event->result.value * 100;
+
+ if (report) {
+ printf("Looped for %lu instructions, overhead %lu\n", instructions, overhead);
+ printf("Expected %lu\n", expected);
+ printf("Actual %llu\n", event->result.value);
+ printf("Error %ld, %f%%\n", difference, percentage);
+ printf("Took %d EBBs\n", ebb_state.stats.ebb_count);
+ }
+
+ if (difference < 0)
+ difference = -difference;
+
+ /* Tolerate a difference of up to 0.0001 % */
+ difference *= 10000 * 100;
+ if (difference / event->result.value)
+ return -1;
+
+ return 0;
+}
+
+/* Count how many instructions it takes to do a null loop */
+static uint64_t determine_overhead(struct event *event)
+{
+ uint64_t current, overhead;
+ int i;
+
+ do_count_loop(event, 0, 0, false);
+ overhead = event->result.value;
+
+ for (i = 0; i < 100; i++) {
+ do_count_loop(event, 0, 0, false);
+ current = event->result.value;
+ if (current < overhead) {
+ printf("Replacing overhead %lu with %lu\n", overhead, current);
+ overhead = current;
+ }
+ }
+
+ return overhead;
+}
+
+static void pmc4_ebb_callee(void)
+{
+ uint64_t val;
+
+ val = mfspr(SPRN_BESCR);
+ if (!(val & BESCR_PMEO)) {
+ ebb_state.stats.spurious++;
+ goto out;
+ }
+
+ ebb_state.stats.ebb_count++;
+ count_pmc(4, sample_period);
+out:
+ if (counters_frozen)
+ reset_ebb_with_clear_mask(MMCR0_PMAO);
+ else
+ reset_ebb();
+}
+
+int instruction_count(void)
+{
+ struct event event;
+ uint64_t overhead;
+
+ event_init_named(&event, 0x400FA, "PM_RUN_INST_CMPL");
+ event_leader_ebb_init(&event);
+ event.attr.exclude_kernel = 1;
+ event.attr.exclude_hv = 1;
+ event.attr.exclude_idle = 1;
+
+ FAIL_IF(event_open(&event));
+ FAIL_IF(ebb_event_enable(&event));
+
+ sample_period = COUNTER_OVERFLOW;
+
+ setup_ebb_handler(pmc4_ebb_callee);
+ mtspr(SPRN_MMCR0, mfspr(SPRN_MMCR0) & ~MMCR0_FC);
+ ebb_global_enable();
+
+ overhead = determine_overhead(&event);
+ printf("Overhead of null loop: %lu instructions\n", overhead);
+
+ /* Run for 1M instructions */
+ FAIL_IF(do_count_loop(&event, 0x100000, overhead, true));
+
+ /* Run for 10M instructions */
+ FAIL_IF(do_count_loop(&event, 0xa00000, overhead, true));
+
+ /* Run for 100M instructions */
+ FAIL_IF(do_count_loop(&event, 0x6400000, overhead, true));
+
+ /* Run for 1G instructions */
+ FAIL_IF(do_count_loop(&event, 0x40000000, overhead, true));
+
+ /* Run for 16G instructions */
+ FAIL_IF(do_count_loop(&event, 0x400000000, overhead, true));
+
+ /* Run for 64G instructions */
+ FAIL_IF(do_count_loop(&event, 0x1000000000, overhead, true));
+
+ /* Run for 128G instructions */
+ FAIL_IF(do_count_loop(&event, 0x2000000000, overhead, true));
+
+ ebb_global_disable();
+ event_close(&event);
+
+ printf("Finished OK\n");
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(instruction_count, "instruction_count");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/lost_exception_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/lost_exception_test.c
new file mode 100644
index 000000000..0c9dd9b2e
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/lost_exception_test.c
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <sched.h>
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/mman.h>
+
+#include "ebb.h"
+
+
+/*
+ * Test that tries to trigger CPU_FTR_PMAO_BUG. Which is a hardware defect
+ * where an exception triggers but we context switch before it is delivered and
+ * lose the exception.
+ */
+
+static int test_body(void)
+{
+ int i, orig_period, max_period;
+ struct event event;
+
+ /* We use PMC4 to make sure the kernel switches all counters correctly */
+ event_init_named(&event, 0x40002, "instructions");
+ event_leader_ebb_init(&event);
+
+ event.attr.exclude_kernel = 1;
+ event.attr.exclude_hv = 1;
+ event.attr.exclude_idle = 1;
+
+ FAIL_IF(event_open(&event));
+
+ ebb_enable_pmc_counting(4);
+ setup_ebb_handler(standard_ebb_callee);
+ ebb_global_enable();
+ FAIL_IF(ebb_event_enable(&event));
+
+ /*
+ * We want a low sample period, but we also want to get out of the EBB
+ * handler without tripping up again.
+ *
+ * This value picked after much experimentation.
+ */
+ orig_period = max_period = sample_period = 400;
+
+ mtspr(SPRN_PMC4, pmc_sample_period(sample_period));
+
+ while (ebb_state.stats.ebb_count < 1000000) {
+ /*
+ * We are trying to get the EBB exception to race exactly with
+ * us entering the kernel to do the syscall. We then need the
+ * kernel to decide our timeslice is up and context switch to
+ * the other thread. When we come back our EBB will have been
+ * lost and we'll spin in this while loop forever.
+ */
+
+ for (i = 0; i < 100000; i++)
+ sched_yield();
+
+ /* Change the sample period slightly to try and hit the race */
+ if (sample_period >= (orig_period + 200))
+ sample_period = orig_period;
+ else
+ sample_period++;
+
+ if (sample_period > max_period)
+ max_period = sample_period;
+ }
+
+ ebb_freeze_pmcs();
+ ebb_global_disable();
+
+ count_pmc(4, sample_period);
+ mtspr(SPRN_PMC4, 0xdead);
+
+ dump_summary_ebb_state();
+ dump_ebb_hw_state();
+
+ event_close(&event);
+
+ FAIL_IF(ebb_state.stats.ebb_count == 0);
+
+ /* We vary our sample period so we need extra fudge here */
+ FAIL_IF(!ebb_check_count(4, orig_period, 2 * (max_period - orig_period)));
+
+ return 0;
+}
+
+static int lost_exception(void)
+{
+ return eat_cpu(test_body);
+}
+
+int main(void)
+{
+ return test_harness(lost_exception, "lost_exception");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/multi_counter_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/multi_counter_test.c
new file mode 100644
index 000000000..67d78af32
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/multi_counter_test.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/ioctl.h>
+
+#include "ebb.h"
+
+
+/*
+ * Test counting multiple events using EBBs.
+ */
+int multi_counter(void)
+{
+ struct event events[6];
+ int i, group_fd;
+
+ event_init_named(&events[0], 0x1001C, "PM_CMPLU_STALL_THRD");
+ event_init_named(&events[1], 0x2D016, "PM_CMPLU_STALL_FXU");
+ event_init_named(&events[2], 0x30006, "PM_CMPLU_STALL_OTHER_CMPL");
+ event_init_named(&events[3], 0x4000A, "PM_CMPLU_STALL");
+ event_init_named(&events[4], 0x600f4, "PM_RUN_CYC");
+ event_init_named(&events[5], 0x500fa, "PM_RUN_INST_CMPL");
+
+ event_leader_ebb_init(&events[0]);
+ for (i = 1; i < 6; i++)
+ event_ebb_init(&events[i]);
+
+ group_fd = -1;
+ for (i = 0; i < 6; i++) {
+ events[i].attr.exclude_kernel = 1;
+ events[i].attr.exclude_hv = 1;
+ events[i].attr.exclude_idle = 1;
+
+ FAIL_IF(event_open_with_group(&events[i], group_fd));
+ if (group_fd == -1)
+ group_fd = events[0].fd;
+ }
+
+ ebb_enable_pmc_counting(1);
+ ebb_enable_pmc_counting(2);
+ ebb_enable_pmc_counting(3);
+ ebb_enable_pmc_counting(4);
+ ebb_enable_pmc_counting(5);
+ ebb_enable_pmc_counting(6);
+ setup_ebb_handler(standard_ebb_callee);
+
+ FAIL_IF(ioctl(events[0].fd, PERF_EVENT_IOC_ENABLE, PERF_IOC_FLAG_GROUP));
+ FAIL_IF(event_read(&events[0]));
+
+ ebb_global_enable();
+
+ mtspr(SPRN_PMC1, pmc_sample_period(sample_period));
+ mtspr(SPRN_PMC2, pmc_sample_period(sample_period));
+ mtspr(SPRN_PMC3, pmc_sample_period(sample_period));
+ mtspr(SPRN_PMC4, pmc_sample_period(sample_period));
+ mtspr(SPRN_PMC5, pmc_sample_period(sample_period));
+ mtspr(SPRN_PMC6, pmc_sample_period(sample_period));
+
+ while (ebb_state.stats.ebb_count < 50) {
+ FAIL_IF(core_busy_loop());
+ FAIL_IF(ebb_check_mmcr0());
+ }
+
+ ebb_global_disable();
+ ebb_freeze_pmcs();
+
+ count_pmc(1, sample_period);
+ count_pmc(2, sample_period);
+ count_pmc(3, sample_period);
+ count_pmc(4, sample_period);
+ count_pmc(5, sample_period);
+ count_pmc(6, sample_period);
+
+ dump_ebb_state();
+
+ for (i = 0; i < 6; i++)
+ event_close(&events[i]);
+
+ FAIL_IF(ebb_state.stats.ebb_count == 0);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(multi_counter, "multi_counter");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/multi_ebb_procs_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/multi_ebb_procs_test.c
new file mode 100644
index 000000000..b8dc371f9
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/multi_ebb_procs_test.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <signal.h>
+
+#include "ebb.h"
+
+
+/*
+ * Test running multiple EBB using processes at once on a single CPU. They
+ * should all run happily without interfering with each other.
+ */
+
+static bool child_should_exit;
+
+static void sigint_handler(int signal)
+{
+ child_should_exit = true;
+}
+
+struct sigaction sigint_action = {
+ .sa_handler = sigint_handler,
+};
+
+static int cycles_child(void)
+{
+ struct event event;
+
+ if (sigaction(SIGINT, &sigint_action, NULL)) {
+ perror("sigaction");
+ return 1;
+ }
+
+ event_init_named(&event, 0x1001e, "cycles");
+ event_leader_ebb_init(&event);
+
+ event.attr.exclude_kernel = 1;
+ event.attr.exclude_hv = 1;
+ event.attr.exclude_idle = 1;
+
+ FAIL_IF(event_open(&event));
+
+ ebb_enable_pmc_counting(1);
+ setup_ebb_handler(standard_ebb_callee);
+ ebb_global_enable();
+
+ FAIL_IF(ebb_event_enable(&event));
+
+ mtspr(SPRN_PMC1, pmc_sample_period(sample_period));
+
+ while (!child_should_exit) {
+ FAIL_IF(core_busy_loop());
+ FAIL_IF(ebb_check_mmcr0());
+ }
+
+ ebb_global_disable();
+ ebb_freeze_pmcs();
+
+ count_pmc(1, sample_period);
+
+ dump_summary_ebb_state();
+
+ event_close(&event);
+
+ FAIL_IF(ebb_state.stats.ebb_count == 0);
+
+ return 0;
+}
+
+#define NR_CHILDREN 4
+
+int multi_ebb_procs(void)
+{
+ pid_t pids[NR_CHILDREN];
+ int cpu, rc, i;
+
+ cpu = pick_online_cpu();
+ FAIL_IF(cpu < 0);
+ FAIL_IF(bind_to_cpu(cpu));
+
+ for (i = 0; i < NR_CHILDREN; i++) {
+ pids[i] = fork();
+ if (pids[i] == 0)
+ exit(cycles_child());
+ }
+
+ /* Have them all run for "a while" */
+ sleep(10);
+
+ rc = 0;
+ for (i = 0; i < NR_CHILDREN; i++) {
+ /* Tell them to stop */
+ kill(pids[i], SIGINT);
+ /* And wait */
+ rc |= wait_for_child(pids[i]);
+ }
+
+ return rc;
+}
+
+int main(void)
+{
+ return test_harness(multi_ebb_procs, "multi_ebb_procs");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c
new file mode 100644
index 000000000..2f9bf8edf
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/no_handler_test.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <setjmp.h>
+#include <signal.h>
+
+#include "ebb.h"
+
+
+/* Test that things work sanely if we have no handler */
+
+static int no_handler_test(void)
+{
+ struct event event;
+ u64 val;
+ int i;
+
+ event_init_named(&event, 0x1001e, "cycles");
+ event_leader_ebb_init(&event);
+
+ event.attr.exclude_kernel = 1;
+ event.attr.exclude_hv = 1;
+ event.attr.exclude_idle = 1;
+
+ FAIL_IF(event_open(&event));
+ FAIL_IF(ebb_event_enable(&event));
+
+ val = mfspr(SPRN_EBBHR);
+ FAIL_IF(val != 0);
+
+ /* Make sure it overflows quickly */
+ sample_period = 1000;
+ mtspr(SPRN_PMC1, pmc_sample_period(sample_period));
+
+ /* Spin to make sure the event has time to overflow */
+ for (i = 0; i < 1000; i++)
+ mb();
+
+ dump_ebb_state();
+
+ /* We expect to see the PMU frozen & PMAO set */
+ val = mfspr(SPRN_MMCR0);
+ FAIL_IF(val != 0x0000000080000080);
+
+ event_close(&event);
+
+ dump_ebb_state();
+
+ /* The real test is that we never took an EBB at 0x0 */
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(no_handler_test,"no_handler_test");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/pmae_handling_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/pmae_handling_test.c
new file mode 100644
index 000000000..986500fd2
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/pmae_handling_test.c
@@ -0,0 +1,106 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <sched.h>
+#include <signal.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "ebb.h"
+
+
+/*
+ * Test that the kernel properly handles PMAE across context switches.
+ *
+ * We test this by calling into the kernel inside our EBB handler, where PMAE
+ * is clear. A cpu eater companion thread is running on the same CPU as us to
+ * encourage the scheduler to switch us.
+ *
+ * The kernel must make sure that when it context switches us back in, it
+ * honours the fact that we had PMAE clear.
+ *
+ * Observed to hit the failing case on the first EBB with a broken kernel.
+ */
+
+static bool mmcr0_mismatch;
+static uint64_t before, after;
+
+static void syscall_ebb_callee(void)
+{
+ uint64_t val;
+
+ val = mfspr(SPRN_BESCR);
+ if (!(val & BESCR_PMEO)) {
+ ebb_state.stats.spurious++;
+ goto out;
+ }
+
+ ebb_state.stats.ebb_count++;
+ count_pmc(1, sample_period);
+
+ before = mfspr(SPRN_MMCR0);
+
+ /* Try and get ourselves scheduled, to force a PMU context switch */
+ sched_yield();
+
+ after = mfspr(SPRN_MMCR0);
+ if (before != after)
+ mmcr0_mismatch = true;
+
+out:
+ reset_ebb();
+}
+
+static int test_body(void)
+{
+ struct event event;
+
+ event_init_named(&event, 0x1001e, "cycles");
+ event_leader_ebb_init(&event);
+
+ event.attr.exclude_kernel = 1;
+ event.attr.exclude_hv = 1;
+ event.attr.exclude_idle = 1;
+
+ FAIL_IF(event_open(&event));
+
+ setup_ebb_handler(syscall_ebb_callee);
+ ebb_global_enable();
+
+ FAIL_IF(ebb_event_enable(&event));
+
+ mtspr(SPRN_PMC1, pmc_sample_period(sample_period));
+
+ while (ebb_state.stats.ebb_count < 20 && !mmcr0_mismatch)
+ FAIL_IF(core_busy_loop());
+
+ ebb_global_disable();
+ ebb_freeze_pmcs();
+
+ count_pmc(1, sample_period);
+
+ dump_ebb_state();
+
+ if (mmcr0_mismatch)
+ printf("Saw MMCR0 before 0x%lx after 0x%lx\n", before, after);
+
+ event_close(&event);
+
+ FAIL_IF(ebb_state.stats.ebb_count == 0);
+ FAIL_IF(mmcr0_mismatch);
+
+ return 0;
+}
+
+int pmae_handling(void)
+{
+ return eat_cpu(test_body);
+}
+
+int main(void)
+{
+ return test_harness(pmae_handling, "pmae_handling");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c
new file mode 100644
index 000000000..a503fa70c
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/pmc56_overflow_test.c
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "ebb.h"
+
+
+/*
+ * Test that PMC5 & 6 are frozen (ie. don't overflow) when they are not being
+ * used. Tests the MMCR0_FC56 logic in the kernel.
+ */
+
+static int pmc56_overflowed;
+
+static void ebb_callee(void)
+{
+ uint64_t val;
+
+ val = mfspr(SPRN_BESCR);
+ if (!(val & BESCR_PMEO)) {
+ ebb_state.stats.spurious++;
+ goto out;
+ }
+
+ ebb_state.stats.ebb_count++;
+ count_pmc(2, sample_period);
+
+ val = mfspr(SPRN_PMC5);
+ if (val >= COUNTER_OVERFLOW)
+ pmc56_overflowed++;
+
+ count_pmc(5, COUNTER_OVERFLOW);
+
+ val = mfspr(SPRN_PMC6);
+ if (val >= COUNTER_OVERFLOW)
+ pmc56_overflowed++;
+
+ count_pmc(6, COUNTER_OVERFLOW);
+
+out:
+ reset_ebb();
+}
+
+int pmc56_overflow(void)
+{
+ struct event event;
+
+ /* Use PMC2 so we set PMCjCE, which enables PMC5/6 */
+ event_init(&event, 0x2001e);
+ event_leader_ebb_init(&event);
+
+ event.attr.exclude_kernel = 1;
+ event.attr.exclude_hv = 1;
+ event.attr.exclude_idle = 1;
+
+ FAIL_IF(event_open(&event));
+
+ setup_ebb_handler(ebb_callee);
+ ebb_global_enable();
+
+ FAIL_IF(ebb_event_enable(&event));
+
+ mtspr(SPRN_PMC1, pmc_sample_period(sample_period));
+ mtspr(SPRN_PMC5, 0);
+ mtspr(SPRN_PMC6, 0);
+
+ while (ebb_state.stats.ebb_count < 10)
+ FAIL_IF(core_busy_loop());
+
+ ebb_global_disable();
+ ebb_freeze_pmcs();
+
+ count_pmc(2, sample_period);
+
+ dump_ebb_state();
+
+ printf("PMC5/6 overflow %d\n", pmc56_overflowed);
+
+ event_close(&event);
+
+ FAIL_IF(ebb_state.stats.ebb_count == 0 || pmc56_overflowed != 0);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(pmc56_overflow, "pmc56_overflow");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/reg.h b/kernel/tools/testing/selftests/powerpc/pmu/ebb/reg.h
new file mode 100644
index 000000000..5921b0dfe
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/reg.h
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#ifndef _SELFTESTS_POWERPC_REG_H
+#define _SELFTESTS_POWERPC_REG_H
+
+#define __stringify_1(x) #x
+#define __stringify(x) __stringify_1(x)
+
+#define mfspr(rn) ({unsigned long rval; \
+ asm volatile("mfspr %0," __stringify(rn) \
+ : "=r" (rval)); rval; })
+#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : \
+ : "r" ((unsigned long)(v)) \
+ : "memory")
+
+#define mb() asm volatile("sync" : : : "memory");
+
+#define SPRN_MMCR2 769
+#define SPRN_MMCRA 770
+#define SPRN_MMCR0 779
+#define MMCR0_PMAO 0x00000080
+#define MMCR0_PMAE 0x04000000
+#define MMCR0_FC 0x80000000
+#define SPRN_EBBHR 804
+#define SPRN_EBBRR 805
+#define SPRN_BESCR 806 /* Branch event status & control register */
+#define SPRN_BESCRS 800 /* Branch event status & control set (1 bits set to 1) */
+#define SPRN_BESCRSU 801 /* Branch event status & control set upper */
+#define SPRN_BESCRR 802 /* Branch event status & control REset (1 bits set to 0) */
+#define SPRN_BESCRRU 803 /* Branch event status & control REset upper */
+
+#define BESCR_PMEO 0x1 /* PMU Event-based exception Occurred */
+#define BESCR_PME (0x1ul << 32) /* PMU Event-based exception Enable */
+
+#define SPRN_PMC1 771
+#define SPRN_PMC2 772
+#define SPRN_PMC3 773
+#define SPRN_PMC4 774
+#define SPRN_PMC5 775
+#define SPRN_PMC6 776
+
+#define SPRN_SIAR 780
+#define SPRN_SDAR 781
+#define SPRN_SIER 768
+
+#endif /* _SELFTESTS_POWERPC_REG_H */
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test.c
new file mode 100644
index 000000000..0cae66f65
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/reg_access_test.c
@@ -0,0 +1,39 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "ebb.h"
+#include "reg.h"
+
+
+/*
+ * Test basic access to the EBB regs, they should be user accessible with no
+ * kernel interaction required.
+ */
+int reg_access(void)
+{
+ uint64_t val, expected;
+
+ expected = 0x8000000100000000ull;
+ mtspr(SPRN_BESCR, expected);
+ val = mfspr(SPRN_BESCR);
+
+ FAIL_IF(val != expected);
+
+ expected = 0x0000000001000000ull;
+ mtspr(SPRN_EBBHR, expected);
+ val = mfspr(SPRN_EBBHR);
+
+ FAIL_IF(val != expected);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(reg_access, "reg_access");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/task_event_pinned_vs_ebb_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/task_event_pinned_vs_ebb_test.c
new file mode 100644
index 000000000..d56607e4f
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/task_event_pinned_vs_ebb_test.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <unistd.h>
+
+#include "ebb.h"
+
+
+/*
+ * Tests a pinned per-task event vs an EBB - in that order. The pinned per-task
+ * event should prevent the EBB event from being enabled.
+ */
+
+static int setup_child_event(struct event *event, pid_t child_pid)
+{
+ event_init_named(event, 0x400FA, "PM_RUN_INST_CMPL");
+
+ event->attr.pinned = 1;
+
+ event->attr.exclude_kernel = 1;
+ event->attr.exclude_hv = 1;
+ event->attr.exclude_idle = 1;
+
+ FAIL_IF(event_open_with_pid(event, child_pid));
+ FAIL_IF(event_enable(event));
+
+ return 0;
+}
+
+int task_event_pinned_vs_ebb(void)
+{
+ union pipe read_pipe, write_pipe;
+ struct event event;
+ pid_t pid;
+ int rc;
+
+ FAIL_IF(pipe(read_pipe.fds) == -1);
+ FAIL_IF(pipe(write_pipe.fds) == -1);
+
+ pid = fork();
+ if (pid == 0) {
+ /* NB order of pipes looks reversed */
+ exit(ebb_child(write_pipe, read_pipe));
+ }
+
+ /* We setup the task event first */
+ rc = setup_child_event(&event, pid);
+ if (rc) {
+ kill_child_and_wait(pid);
+ return rc;
+ }
+
+ /* Signal the child to install its EBB event and wait */
+ if (sync_with_child(read_pipe, write_pipe))
+ /* If it fails, wait for it to exit */
+ goto wait;
+
+ /* Signal the child to run */
+ FAIL_IF(sync_with_child(read_pipe, write_pipe));
+
+wait:
+ /* We expect it to fail to read the event */
+ FAIL_IF(wait_for_child(pid) != 2);
+ FAIL_IF(event_disable(&event));
+ FAIL_IF(event_read(&event));
+
+ event_report(&event);
+
+ FAIL_IF(event.result.value == 0);
+ /*
+ * For reasons I don't understand enabled is usually just slightly
+ * lower than running. Would be good to confirm why.
+ */
+ FAIL_IF(event.result.enabled == 0);
+ FAIL_IF(event.result.running == 0);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(task_event_pinned_vs_ebb, "task_event_pinned_vs_ebb");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/task_event_vs_ebb_test.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/task_event_vs_ebb_test.c
new file mode 100644
index 000000000..eba32196d
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/task_event_vs_ebb_test.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdbool.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <unistd.h>
+
+#include "ebb.h"
+
+
+/*
+ * Tests a per-task event vs an EBB - in that order. The EBB should push the
+ * per-task event off the PMU.
+ */
+
+static int setup_child_event(struct event *event, pid_t child_pid)
+{
+ event_init_named(event, 0x400FA, "PM_RUN_INST_CMPL");
+
+ event->attr.exclude_kernel = 1;
+ event->attr.exclude_hv = 1;
+ event->attr.exclude_idle = 1;
+
+ FAIL_IF(event_open_with_pid(event, child_pid));
+ FAIL_IF(event_enable(event));
+
+ return 0;
+}
+
+int task_event_vs_ebb(void)
+{
+ union pipe read_pipe, write_pipe;
+ struct event event;
+ pid_t pid;
+ int rc;
+
+ FAIL_IF(pipe(read_pipe.fds) == -1);
+ FAIL_IF(pipe(write_pipe.fds) == -1);
+
+ pid = fork();
+ if (pid == 0) {
+ /* NB order of pipes looks reversed */
+ exit(ebb_child(write_pipe, read_pipe));
+ }
+
+ /* We setup the task event first */
+ rc = setup_child_event(&event, pid);
+ if (rc) {
+ kill_child_and_wait(pid);
+ return rc;
+ }
+
+ /* Signal the child to install its EBB event and wait */
+ if (sync_with_child(read_pipe, write_pipe))
+ /* If it fails, wait for it to exit */
+ goto wait;
+
+ /* Signal the child to run */
+ FAIL_IF(sync_with_child(read_pipe, write_pipe));
+
+wait:
+ /* The EBB event should push the task event off so the child should succeed */
+ FAIL_IF(wait_for_child(pid));
+ FAIL_IF(event_disable(&event));
+ FAIL_IF(event_read(&event));
+
+ event_report(&event);
+
+ /* The task event may have run, or not so we can't assert anything about it */
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(task_event_vs_ebb, "task_event_vs_ebb");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/trace.c b/kernel/tools/testing/selftests/powerpc/pmu/ebb/trace.c
new file mode 100644
index 000000000..251e66ab2
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/trace.c
@@ -0,0 +1,300 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/mman.h>
+
+#include "trace.h"
+
+
+struct trace_buffer *trace_buffer_allocate(u64 size)
+{
+ struct trace_buffer *tb;
+
+ if (size < sizeof(*tb)) {
+ fprintf(stderr, "Error: trace buffer too small\n");
+ return NULL;
+ }
+
+ tb = mmap(NULL, size, PROT_READ | PROT_WRITE,
+ MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
+ if (tb == MAP_FAILED) {
+ perror("mmap");
+ return NULL;
+ }
+
+ tb->size = size;
+ tb->tail = tb->data;
+ tb->overflow = false;
+
+ return tb;
+}
+
+static bool trace_check_bounds(struct trace_buffer *tb, void *p)
+{
+ return p < ((void *)tb + tb->size);
+}
+
+static bool trace_check_alloc(struct trace_buffer *tb, void *p)
+{
+ /*
+ * If we ever overflowed don't allow any more input. This prevents us
+ * from dropping a large item and then later logging a small one. The
+ * buffer should just stop when overflow happened, not be patchy. If
+ * you're overflowing, make your buffer bigger.
+ */
+ if (tb->overflow)
+ return false;
+
+ if (!trace_check_bounds(tb, p)) {
+ tb->overflow = true;
+ return false;
+ }
+
+ return true;
+}
+
+static void *trace_alloc(struct trace_buffer *tb, int bytes)
+{
+ void *p, *newtail;
+
+ p = tb->tail;
+ newtail = tb->tail + bytes;
+ if (!trace_check_alloc(tb, newtail))
+ return NULL;
+
+ tb->tail = newtail;
+
+ return p;
+}
+
+static struct trace_entry *trace_alloc_entry(struct trace_buffer *tb, int payload_size)
+{
+ struct trace_entry *e;
+
+ e = trace_alloc(tb, sizeof(*e) + payload_size);
+ if (e)
+ e->length = payload_size;
+
+ return e;
+}
+
+int trace_log_reg(struct trace_buffer *tb, u64 reg, u64 value)
+{
+ struct trace_entry *e;
+ u64 *p;
+
+ e = trace_alloc_entry(tb, sizeof(reg) + sizeof(value));
+ if (!e)
+ return -ENOSPC;
+
+ e->type = TRACE_TYPE_REG;
+ p = (u64 *)e->data;
+ *p++ = reg;
+ *p++ = value;
+
+ return 0;
+}
+
+int trace_log_counter(struct trace_buffer *tb, u64 value)
+{
+ struct trace_entry *e;
+ u64 *p;
+
+ e = trace_alloc_entry(tb, sizeof(value));
+ if (!e)
+ return -ENOSPC;
+
+ e->type = TRACE_TYPE_COUNTER;
+ p = (u64 *)e->data;
+ *p++ = value;
+
+ return 0;
+}
+
+int trace_log_string(struct trace_buffer *tb, char *str)
+{
+ struct trace_entry *e;
+ char *p;
+ int len;
+
+ len = strlen(str);
+
+ /* We NULL terminate to make printing easier */
+ e = trace_alloc_entry(tb, len + 1);
+ if (!e)
+ return -ENOSPC;
+
+ e->type = TRACE_TYPE_STRING;
+ p = (char *)e->data;
+ memcpy(p, str, len);
+ p += len;
+ *p = '\0';
+
+ return 0;
+}
+
+int trace_log_indent(struct trace_buffer *tb)
+{
+ struct trace_entry *e;
+
+ e = trace_alloc_entry(tb, 0);
+ if (!e)
+ return -ENOSPC;
+
+ e->type = TRACE_TYPE_INDENT;
+
+ return 0;
+}
+
+int trace_log_outdent(struct trace_buffer *tb)
+{
+ struct trace_entry *e;
+
+ e = trace_alloc_entry(tb, 0);
+ if (!e)
+ return -ENOSPC;
+
+ e->type = TRACE_TYPE_OUTDENT;
+
+ return 0;
+}
+
+static void trace_print_header(int seq, int prefix)
+{
+ printf("%*s[%d]: ", prefix, "", seq);
+}
+
+static char *trace_decode_reg(int reg)
+{
+ switch (reg) {
+ case 769: return "SPRN_MMCR2"; break;
+ case 770: return "SPRN_MMCRA"; break;
+ case 779: return "SPRN_MMCR0"; break;
+ case 804: return "SPRN_EBBHR"; break;
+ case 805: return "SPRN_EBBRR"; break;
+ case 806: return "SPRN_BESCR"; break;
+ case 800: return "SPRN_BESCRS"; break;
+ case 801: return "SPRN_BESCRSU"; break;
+ case 802: return "SPRN_BESCRR"; break;
+ case 803: return "SPRN_BESCRRU"; break;
+ case 771: return "SPRN_PMC1"; break;
+ case 772: return "SPRN_PMC2"; break;
+ case 773: return "SPRN_PMC3"; break;
+ case 774: return "SPRN_PMC4"; break;
+ case 775: return "SPRN_PMC5"; break;
+ case 776: return "SPRN_PMC6"; break;
+ case 780: return "SPRN_SIAR"; break;
+ case 781: return "SPRN_SDAR"; break;
+ case 768: return "SPRN_SIER"; break;
+ }
+
+ return NULL;
+}
+
+static void trace_print_reg(struct trace_entry *e)
+{
+ u64 *p, *reg, *value;
+ char *name;
+
+ p = (u64 *)e->data;
+ reg = p++;
+ value = p;
+
+ name = trace_decode_reg(*reg);
+ if (name)
+ printf("register %-10s = 0x%016llx\n", name, *value);
+ else
+ printf("register %lld = 0x%016llx\n", *reg, *value);
+}
+
+static void trace_print_counter(struct trace_entry *e)
+{
+ u64 *value;
+
+ value = (u64 *)e->data;
+ printf("counter = %lld\n", *value);
+}
+
+static void trace_print_string(struct trace_entry *e)
+{
+ char *str;
+
+ str = (char *)e->data;
+ puts(str);
+}
+
+#define BASE_PREFIX 2
+#define PREFIX_DELTA 8
+
+static void trace_print_entry(struct trace_entry *e, int seq, int *prefix)
+{
+ switch (e->type) {
+ case TRACE_TYPE_REG:
+ trace_print_header(seq, *prefix);
+ trace_print_reg(e);
+ break;
+ case TRACE_TYPE_COUNTER:
+ trace_print_header(seq, *prefix);
+ trace_print_counter(e);
+ break;
+ case TRACE_TYPE_STRING:
+ trace_print_header(seq, *prefix);
+ trace_print_string(e);
+ break;
+ case TRACE_TYPE_INDENT:
+ trace_print_header(seq, *prefix);
+ puts("{");
+ *prefix += PREFIX_DELTA;
+ break;
+ case TRACE_TYPE_OUTDENT:
+ *prefix -= PREFIX_DELTA;
+ if (*prefix < BASE_PREFIX)
+ *prefix = BASE_PREFIX;
+ trace_print_header(seq, *prefix);
+ puts("}");
+ break;
+ default:
+ trace_print_header(seq, *prefix);
+ printf("entry @ %p type %d\n", e, e->type);
+ break;
+ }
+}
+
+void trace_buffer_print(struct trace_buffer *tb)
+{
+ struct trace_entry *e;
+ int i, prefix;
+ void *p;
+
+ printf("Trace buffer dump:\n");
+ printf(" address %p \n", tb);
+ printf(" tail %p\n", tb->tail);
+ printf(" size %llu\n", tb->size);
+ printf(" overflow %s\n", tb->overflow ? "TRUE" : "false");
+ printf(" Content:\n");
+
+ p = tb->data;
+
+ i = 0;
+ prefix = BASE_PREFIX;
+
+ while (trace_check_bounds(tb, p) && p < tb->tail) {
+ e = p;
+
+ trace_print_entry(e, i, &prefix);
+
+ i++;
+ p = (void *)e + sizeof(*e) + e->length;
+ }
+}
+
+void trace_print_location(struct trace_buffer *tb)
+{
+ printf("Trace buffer 0x%llx bytes @ %p\n", tb->size, tb);
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/ebb/trace.h b/kernel/tools/testing/selftests/powerpc/pmu/ebb/trace.h
new file mode 100644
index 000000000..926458e28
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/ebb/trace.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#ifndef _SELFTESTS_POWERPC_PMU_EBB_TRACE_H
+#define _SELFTESTS_POWERPC_PMU_EBB_TRACE_H
+
+#include "utils.h"
+
+#define TRACE_TYPE_REG 1
+#define TRACE_TYPE_COUNTER 2
+#define TRACE_TYPE_STRING 3
+#define TRACE_TYPE_INDENT 4
+#define TRACE_TYPE_OUTDENT 5
+
+struct trace_entry
+{
+ u8 type;
+ u8 length;
+ u8 data[0];
+};
+
+struct trace_buffer
+{
+ u64 size;
+ bool overflow;
+ void *tail;
+ u8 data[0];
+};
+
+struct trace_buffer *trace_buffer_allocate(u64 size);
+int trace_log_reg(struct trace_buffer *tb, u64 reg, u64 value);
+int trace_log_counter(struct trace_buffer *tb, u64 value);
+int trace_log_string(struct trace_buffer *tb, char *str);
+int trace_log_indent(struct trace_buffer *tb);
+int trace_log_outdent(struct trace_buffer *tb);
+void trace_buffer_print(struct trace_buffer *tb);
+void trace_print_location(struct trace_buffer *tb);
+
+#endif /* _SELFTESTS_POWERPC_PMU_EBB_TRACE_H */
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/event.c b/kernel/tools/testing/selftests/powerpc/pmu/event.c
new file mode 100644
index 000000000..184b36807
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/event.c
@@ -0,0 +1,131 @@
+/*
+ * Copyright 2013, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#define _GNU_SOURCE
+#include <unistd.h>
+#include <sys/syscall.h>
+#include <string.h>
+#include <stdio.h>
+#include <sys/ioctl.h>
+
+#include "event.h"
+
+
+int perf_event_open(struct perf_event_attr *attr, pid_t pid, int cpu,
+ int group_fd, unsigned long flags)
+{
+ return syscall(__NR_perf_event_open, attr, pid, cpu,
+ group_fd, flags);
+}
+
+void event_init_opts(struct event *e, u64 config, int type, char *name)
+{
+ memset(e, 0, sizeof(*e));
+
+ e->name = name;
+
+ e->attr.type = type;
+ e->attr.config = config;
+ e->attr.size = sizeof(e->attr);
+ /* This has to match the structure layout in the header */
+ e->attr.read_format = PERF_FORMAT_TOTAL_TIME_ENABLED | \
+ PERF_FORMAT_TOTAL_TIME_RUNNING;
+}
+
+void event_init_named(struct event *e, u64 config, char *name)
+{
+ event_init_opts(e, config, PERF_TYPE_RAW, name);
+}
+
+void event_init(struct event *e, u64 config)
+{
+ event_init_opts(e, config, PERF_TYPE_RAW, "event");
+}
+
+#define PERF_CURRENT_PID 0
+#define PERF_NO_PID -1
+#define PERF_NO_CPU -1
+#define PERF_NO_GROUP -1
+
+int event_open_with_options(struct event *e, pid_t pid, int cpu, int group_fd)
+{
+ e->fd = perf_event_open(&e->attr, pid, cpu, group_fd, 0);
+ if (e->fd == -1) {
+ perror("perf_event_open");
+ return -1;
+ }
+
+ return 0;
+}
+
+int event_open_with_group(struct event *e, int group_fd)
+{
+ return event_open_with_options(e, PERF_CURRENT_PID, PERF_NO_CPU, group_fd);
+}
+
+int event_open_with_pid(struct event *e, pid_t pid)
+{
+ return event_open_with_options(e, pid, PERF_NO_CPU, PERF_NO_GROUP);
+}
+
+int event_open_with_cpu(struct event *e, int cpu)
+{
+ return event_open_with_options(e, PERF_NO_PID, cpu, PERF_NO_GROUP);
+}
+
+int event_open(struct event *e)
+{
+ return event_open_with_options(e, PERF_CURRENT_PID, PERF_NO_CPU, PERF_NO_GROUP);
+}
+
+void event_close(struct event *e)
+{
+ close(e->fd);
+}
+
+int event_enable(struct event *e)
+{
+ return ioctl(e->fd, PERF_EVENT_IOC_ENABLE);
+}
+
+int event_disable(struct event *e)
+{
+ return ioctl(e->fd, PERF_EVENT_IOC_DISABLE);
+}
+
+int event_reset(struct event *e)
+{
+ return ioctl(e->fd, PERF_EVENT_IOC_RESET);
+}
+
+int event_read(struct event *e)
+{
+ int rc;
+
+ rc = read(e->fd, &e->result, sizeof(e->result));
+ if (rc != sizeof(e->result)) {
+ fprintf(stderr, "read error on event %p!\n", e);
+ return -1;
+ }
+
+ return 0;
+}
+
+void event_report_justified(struct event *e, int name_width, int result_width)
+{
+ printf("%*s: result %*llu ", name_width, e->name, result_width,
+ e->result.value);
+
+ if (e->result.running == e->result.enabled)
+ printf("running/enabled %llu\n", e->result.running);
+ else
+ printf("running %llu enabled %llu\n", e->result.running,
+ e->result.enabled);
+}
+
+void event_report(struct event *e)
+{
+ event_report_justified(e, 0, 0);
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/event.h b/kernel/tools/testing/selftests/powerpc/pmu/event.h
new file mode 100644
index 000000000..a0ea6b1ee
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/event.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2013, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#ifndef _SELFTESTS_POWERPC_PMU_EVENT_H
+#define _SELFTESTS_POWERPC_PMU_EVENT_H
+
+#include <unistd.h>
+#include <linux/perf_event.h>
+
+#include "utils.h"
+
+
+struct event {
+ struct perf_event_attr attr;
+ char *name;
+ int fd;
+ /* This must match the read_format we use */
+ struct {
+ u64 value;
+ u64 running;
+ u64 enabled;
+ } result;
+};
+
+void event_init(struct event *e, u64 config);
+void event_init_named(struct event *e, u64 config, char *name);
+void event_init_opts(struct event *e, u64 config, int type, char *name);
+int event_open_with_options(struct event *e, pid_t pid, int cpu, int group_fd);
+int event_open_with_group(struct event *e, int group_fd);
+int event_open_with_pid(struct event *e, pid_t pid);
+int event_open_with_cpu(struct event *e, int cpu);
+int event_open(struct event *e);
+void event_close(struct event *e);
+int event_enable(struct event *e);
+int event_disable(struct event *e);
+int event_reset(struct event *e);
+int event_read(struct event *e);
+void event_report_justified(struct event *e, int name_width, int result_width);
+void event_report(struct event *e);
+
+#endif /* _SELFTESTS_POWERPC_PMU_EVENT_H */
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/l3_bank_test.c b/kernel/tools/testing/selftests/powerpc/pmu/l3_bank_test.c
new file mode 100644
index 000000000..77472f314
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/l3_bank_test.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "event.h"
+#include "utils.h"
+
+#define MALLOC_SIZE (0x10000 * 10) /* Ought to be enough .. */
+
+/*
+ * Tests that the L3 bank handling is correct. We fixed it in commit e9aaac1.
+ */
+static int l3_bank_test(void)
+{
+ struct event event;
+ char *p;
+ int i;
+
+ p = malloc(MALLOC_SIZE);
+ FAIL_IF(!p);
+
+ event_init(&event, 0x84918F);
+
+ FAIL_IF(event_open(&event));
+
+ for (i = 0; i < MALLOC_SIZE; i += 0x10000)
+ p[i] = i;
+
+ event_read(&event);
+ event_report(&event);
+
+ FAIL_IF(event.result.running == 0);
+ FAIL_IF(event.result.enabled == 0);
+
+ event_close(&event);
+ free(p);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(l3_bank_test, "l3_bank_test");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/lib.c b/kernel/tools/testing/selftests/powerpc/pmu/lib.c
new file mode 100644
index 000000000..a07104c2a
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/lib.c
@@ -0,0 +1,253 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#define _GNU_SOURCE /* For CPU_ZERO etc. */
+
+#include <errno.h>
+#include <sched.h>
+#include <setjmp.h>
+#include <stdlib.h>
+#include <sys/wait.h>
+
+#include "utils.h"
+#include "lib.h"
+
+
+int pick_online_cpu(void)
+{
+ cpu_set_t mask;
+ int cpu;
+
+ CPU_ZERO(&mask);
+
+ if (sched_getaffinity(0, sizeof(mask), &mask)) {
+ perror("sched_getaffinity");
+ return -1;
+ }
+
+ /* We prefer a primary thread, but skip 0 */
+ for (cpu = 8; cpu < CPU_SETSIZE; cpu += 8)
+ if (CPU_ISSET(cpu, &mask))
+ return cpu;
+
+ /* Search for anything, but in reverse */
+ for (cpu = CPU_SETSIZE - 1; cpu >= 0; cpu--)
+ if (CPU_ISSET(cpu, &mask))
+ return cpu;
+
+ printf("No cpus in affinity mask?!\n");
+ return -1;
+}
+
+int bind_to_cpu(int cpu)
+{
+ cpu_set_t mask;
+
+ printf("Binding to cpu %d\n", cpu);
+
+ CPU_ZERO(&mask);
+ CPU_SET(cpu, &mask);
+
+ return sched_setaffinity(0, sizeof(mask), &mask);
+}
+
+#define PARENT_TOKEN 0xAA
+#define CHILD_TOKEN 0x55
+
+int sync_with_child(union pipe read_pipe, union pipe write_pipe)
+{
+ char c = PARENT_TOKEN;
+
+ FAIL_IF(write(write_pipe.write_fd, &c, 1) != 1);
+ FAIL_IF(read(read_pipe.read_fd, &c, 1) != 1);
+ if (c != CHILD_TOKEN) /* sometimes expected */
+ return 1;
+
+ return 0;
+}
+
+int wait_for_parent(union pipe read_pipe)
+{
+ char c;
+
+ FAIL_IF(read(read_pipe.read_fd, &c, 1) != 1);
+ FAIL_IF(c != PARENT_TOKEN);
+
+ return 0;
+}
+
+int notify_parent(union pipe write_pipe)
+{
+ char c = CHILD_TOKEN;
+
+ FAIL_IF(write(write_pipe.write_fd, &c, 1) != 1);
+
+ return 0;
+}
+
+int notify_parent_of_error(union pipe write_pipe)
+{
+ char c = ~CHILD_TOKEN;
+
+ FAIL_IF(write(write_pipe.write_fd, &c, 1) != 1);
+
+ return 0;
+}
+
+int wait_for_child(pid_t child_pid)
+{
+ int rc;
+
+ if (waitpid(child_pid, &rc, 0) == -1) {
+ perror("waitpid");
+ return 1;
+ }
+
+ if (WIFEXITED(rc))
+ rc = WEXITSTATUS(rc);
+ else
+ rc = 1; /* Signal or other */
+
+ return rc;
+}
+
+int kill_child_and_wait(pid_t child_pid)
+{
+ kill(child_pid, SIGTERM);
+
+ return wait_for_child(child_pid);
+}
+
+static int eat_cpu_child(union pipe read_pipe, union pipe write_pipe)
+{
+ volatile int i = 0;
+
+ /*
+ * We are just here to eat cpu and die. So make sure we can be killed,
+ * and also don't do any custom SIGTERM handling.
+ */
+ signal(SIGTERM, SIG_DFL);
+
+ notify_parent(write_pipe);
+ wait_for_parent(read_pipe);
+
+ /* Soak up cpu forever */
+ while (1) i++;
+
+ return 0;
+}
+
+pid_t eat_cpu(int (test_function)(void))
+{
+ union pipe read_pipe, write_pipe;
+ int cpu, rc;
+ pid_t pid;
+
+ cpu = pick_online_cpu();
+ FAIL_IF(cpu < 0);
+ FAIL_IF(bind_to_cpu(cpu));
+
+ if (pipe(read_pipe.fds) == -1)
+ return -1;
+
+ if (pipe(write_pipe.fds) == -1)
+ return -1;
+
+ pid = fork();
+ if (pid == 0)
+ exit(eat_cpu_child(write_pipe, read_pipe));
+
+ if (sync_with_child(read_pipe, write_pipe)) {
+ rc = -1;
+ goto out;
+ }
+
+ printf("main test running as pid %d\n", getpid());
+
+ rc = test_function();
+out:
+ kill(pid, SIGKILL);
+
+ return rc;
+}
+
+struct addr_range libc, vdso;
+
+int parse_proc_maps(void)
+{
+ unsigned long start, end;
+ char execute, name[128];
+ FILE *f;
+ int rc;
+
+ f = fopen("/proc/self/maps", "r");
+ if (!f) {
+ perror("fopen");
+ return -1;
+ }
+
+ do {
+ /* This skips line with no executable which is what we want */
+ rc = fscanf(f, "%lx-%lx %*c%*c%c%*c %*x %*d:%*d %*d %127s\n",
+ &start, &end, &execute, name);
+ if (rc <= 0)
+ break;
+
+ if (execute != 'x')
+ continue;
+
+ if (strstr(name, "libc")) {
+ libc.first = start;
+ libc.last = end - 1;
+ } else if (strstr(name, "[vdso]")) {
+ vdso.first = start;
+ vdso.last = end - 1;
+ }
+ } while(1);
+
+ fclose(f);
+
+ return 0;
+}
+
+#define PARANOID_PATH "/proc/sys/kernel/perf_event_paranoid"
+
+bool require_paranoia_below(int level)
+{
+ unsigned long current;
+ char *end, buf[16];
+ FILE *f;
+ int rc;
+
+ rc = -1;
+
+ f = fopen(PARANOID_PATH, "r");
+ if (!f) {
+ perror("fopen");
+ goto out;
+ }
+
+ if (!fgets(buf, sizeof(buf), f)) {
+ printf("Couldn't read " PARANOID_PATH "?\n");
+ goto out_close;
+ }
+
+ current = strtoul(buf, &end, 10);
+
+ if (end == buf) {
+ printf("Couldn't parse " PARANOID_PATH "?\n");
+ goto out_close;
+ }
+
+ if (current >= level)
+ goto out;
+
+ rc = 0;
+out_close:
+ fclose(f);
+out:
+ return rc;
+}
+
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/lib.h b/kernel/tools/testing/selftests/powerpc/pmu/lib.h
new file mode 100644
index 000000000..ca5d72ae3
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/lib.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#ifndef __SELFTESTS_POWERPC_PMU_LIB_H
+#define __SELFTESTS_POWERPC_PMU_LIB_H
+
+#include <stdio.h>
+#include <stdint.h>
+#include <string.h>
+#include <unistd.h>
+
+union pipe {
+ struct {
+ int read_fd;
+ int write_fd;
+ };
+ int fds[2];
+};
+
+extern int pick_online_cpu(void);
+extern int bind_to_cpu(int cpu);
+extern int kill_child_and_wait(pid_t child_pid);
+extern int wait_for_child(pid_t child_pid);
+extern int sync_with_child(union pipe read_pipe, union pipe write_pipe);
+extern int wait_for_parent(union pipe read_pipe);
+extern int notify_parent(union pipe write_pipe);
+extern int notify_parent_of_error(union pipe write_pipe);
+extern pid_t eat_cpu(int (test_function)(void));
+extern bool require_paranoia_below(int level);
+
+struct addr_range {
+ uint64_t first, last;
+};
+
+extern struct addr_range libc, vdso;
+
+int parse_proc_maps(void);
+
+#endif /* __SELFTESTS_POWERPC_PMU_LIB_H */
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/loop.S b/kernel/tools/testing/selftests/powerpc/pmu/loop.S
new file mode 100644
index 000000000..20c1f0876
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/loop.S
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2013, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#include <ppc-asm.h>
+
+ .text
+
+FUNC_START(thirty_two_instruction_loop)
+ cmpdi r3,0
+ beqlr
+ addi r4,r3,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1
+ addi r4,r4,1 # 28 addi's
+ subi r3,r3,1
+ b FUNC_NAME(thirty_two_instruction_loop)
+FUNC_END(thirty_two_instruction_loop)
diff --git a/kernel/tools/testing/selftests/powerpc/pmu/per_event_excludes.c b/kernel/tools/testing/selftests/powerpc/pmu/per_event_excludes.c
new file mode 100644
index 000000000..fddbbc9ca
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/pmu/per_event_excludes.c
@@ -0,0 +1,114 @@
+/*
+ * Copyright 2014, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#define _GNU_SOURCE
+
+#include <elf.h>
+#include <limits.h>
+#include <stdio.h>
+#include <stdbool.h>
+#include <string.h>
+#include <sys/prctl.h>
+
+#include "event.h"
+#include "lib.h"
+#include "utils.h"
+
+/*
+ * Test that per-event excludes work.
+ */
+
+static int per_event_excludes(void)
+{
+ struct event *e, events[4];
+ char *platform;
+ int i;
+
+ platform = (char *)get_auxv_entry(AT_BASE_PLATFORM);
+ FAIL_IF(!platform);
+ SKIP_IF(strcmp(platform, "power8") != 0);
+
+ /*
+ * We need to create the events disabled, otherwise the running/enabled
+ * counts don't match up.
+ */
+ e = &events[0];
+ event_init_opts(e, PERF_COUNT_HW_INSTRUCTIONS,
+ PERF_TYPE_HARDWARE, "instructions");
+ e->attr.disabled = 1;
+
+ e = &events[1];
+ event_init_opts(e, PERF_COUNT_HW_INSTRUCTIONS,
+ PERF_TYPE_HARDWARE, "instructions(k)");
+ e->attr.disabled = 1;
+ e->attr.exclude_user = 1;
+ e->attr.exclude_hv = 1;
+
+ e = &events[2];
+ event_init_opts(e, PERF_COUNT_HW_INSTRUCTIONS,
+ PERF_TYPE_HARDWARE, "instructions(h)");
+ e->attr.disabled = 1;
+ e->attr.exclude_user = 1;
+ e->attr.exclude_kernel = 1;
+
+ e = &events[3];
+ event_init_opts(e, PERF_COUNT_HW_INSTRUCTIONS,
+ PERF_TYPE_HARDWARE, "instructions(u)");
+ e->attr.disabled = 1;
+ e->attr.exclude_hv = 1;
+ e->attr.exclude_kernel = 1;
+
+ FAIL_IF(event_open(&events[0]));
+
+ /*
+ * The open here will fail if we don't have per event exclude support,
+ * because the second event has an incompatible set of exclude settings
+ * and we're asking for the events to be in a group.
+ */
+ for (i = 1; i < 4; i++)
+ FAIL_IF(event_open_with_group(&events[i], events[0].fd));
+
+ /*
+ * Even though the above will fail without per-event excludes we keep
+ * testing in order to be thorough.
+ */
+ prctl(PR_TASK_PERF_EVENTS_ENABLE);
+
+ /* Spin for a while */
+ for (i = 0; i < INT_MAX; i++)
+ asm volatile("" : : : "memory");
+
+ prctl(PR_TASK_PERF_EVENTS_DISABLE);
+
+ for (i = 0; i < 4; i++) {
+ FAIL_IF(event_read(&events[i]));
+ event_report(&events[i]);
+ }
+
+ /*
+ * We should see that all events have enabled == running. That
+ * shows that they were all on the PMU at once.
+ */
+ for (i = 0; i < 4; i++)
+ FAIL_IF(events[i].result.running != events[i].result.enabled);
+
+ /*
+ * We can also check that the result for instructions is >= all the
+ * other counts. That's because it is counting all instructions while
+ * the others are counting a subset.
+ */
+ for (i = 1; i < 4; i++)
+ FAIL_IF(events[0].result.value < events[i].result.value);
+
+ for (i = 0; i < 4; i++)
+ event_close(&events[i]);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(per_event_excludes, "per_event_excludes");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/primitives/.gitignore b/kernel/tools/testing/selftests/powerpc/primitives/.gitignore
new file mode 100644
index 000000000..4cc4e31be
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/primitives/.gitignore
@@ -0,0 +1 @@
+load_unaligned_zeropad
diff --git a/kernel/tools/testing/selftests/powerpc/primitives/Makefile b/kernel/tools/testing/selftests/powerpc/primitives/Makefile
new file mode 100644
index 000000000..b68c6221d
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/primitives/Makefile
@@ -0,0 +1,12 @@
+CFLAGS += -I$(CURDIR)
+
+TEST_PROGS := load_unaligned_zeropad
+
+all: $(TEST_PROGS)
+
+$(TEST_PROGS): ../harness.c
+
+include ../../lib.mk
+
+clean:
+ rm -f $(TEST_PROGS) *.o
diff --git a/kernel/tools/testing/selftests/powerpc/primitives/asm/asm-compat.h b/kernel/tools/testing/selftests/powerpc/primitives/asm/asm-compat.h
new file mode 120000
index 000000000..b14255e15
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/primitives/asm/asm-compat.h
@@ -0,0 +1 @@
+../.././../../../../arch/powerpc/include/asm/asm-compat.h \ No newline at end of file
diff --git a/kernel/tools/testing/selftests/powerpc/primitives/asm/ppc-opcode.h b/kernel/tools/testing/selftests/powerpc/primitives/asm/ppc-opcode.h
new file mode 100644
index 000000000..e69de29bb
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/primitives/asm/ppc-opcode.h
diff --git a/kernel/tools/testing/selftests/powerpc/primitives/load_unaligned_zeropad.c b/kernel/tools/testing/selftests/powerpc/primitives/load_unaligned_zeropad.c
new file mode 100644
index 000000000..d1b647509
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/primitives/load_unaligned_zeropad.c
@@ -0,0 +1,147 @@
+/*
+ * Userspace test harness for load_unaligned_zeropad. Creates two
+ * pages and uses mprotect to prevent access to the second page and
+ * a SEGV handler that walks the exception tables and runs the fixup
+ * routine.
+ *
+ * The results are compared against a normal load that is that is
+ * performed while access to the second page is enabled via mprotect.
+ *
+ * Copyright (C) 2014 Anton Blanchard <anton@au.ibm.com>, IBM
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+#include <stdbool.h>
+#include <signal.h>
+#include <unistd.h>
+#include <sys/mman.h>
+
+#define FIXUP_SECTION ".ex_fixup"
+
+#include "word-at-a-time.h"
+
+#include "utils.h"
+
+
+static int page_size;
+static char *mem_region;
+
+static int protect_region(void)
+{
+ if (mprotect(mem_region + page_size, page_size, PROT_NONE)) {
+ perror("mprotect");
+ return 1;
+ }
+
+ return 0;
+}
+
+static int unprotect_region(void)
+{
+ if (mprotect(mem_region + page_size, page_size, PROT_READ|PROT_WRITE)) {
+ perror("mprotect");
+ return 1;
+ }
+
+ return 0;
+}
+
+extern char __start___ex_table[];
+extern char __stop___ex_table[];
+
+#if defined(__powerpc64__)
+#define UCONTEXT_NIA(UC) (UC)->uc_mcontext.gp_regs[PT_NIP]
+#elif defined(__powerpc__)
+#define UCONTEXT_NIA(UC) (UC)->uc_mcontext.uc_regs->gregs[PT_NIP]
+#else
+#error implement UCONTEXT_NIA
+#endif
+
+static int segv_error;
+
+static void segv_handler(int signr, siginfo_t *info, void *ptr)
+{
+ ucontext_t *uc = (ucontext_t *)ptr;
+ unsigned long addr = (unsigned long)info->si_addr;
+ unsigned long *ip = &UCONTEXT_NIA(uc);
+ unsigned long *ex_p = (unsigned long *)__start___ex_table;
+
+ while (ex_p < (unsigned long *)__stop___ex_table) {
+ unsigned long insn, fixup;
+
+ insn = *ex_p++;
+ fixup = *ex_p++;
+
+ if (insn == *ip) {
+ *ip = fixup;
+ return;
+ }
+ }
+
+ printf("No exception table match for NIA %lx ADDR %lx\n", *ip, addr);
+ segv_error++;
+}
+
+static void setup_segv_handler(void)
+{
+ struct sigaction action;
+
+ memset(&action, 0, sizeof(action));
+ action.sa_sigaction = segv_handler;
+ action.sa_flags = SA_SIGINFO;
+ sigaction(SIGSEGV, &action, NULL);
+}
+
+static int do_one_test(char *p, int page_offset)
+{
+ unsigned long should;
+ unsigned long got;
+
+ FAIL_IF(unprotect_region());
+ should = *(unsigned long *)p;
+ FAIL_IF(protect_region());
+
+ got = load_unaligned_zeropad(p);
+
+ if (should != got)
+ printf("offset %u load_unaligned_zeropad returned 0x%lx, should be 0x%lx\n", page_offset, got, should);
+
+ return 0;
+}
+
+static int test_body(void)
+{
+ unsigned long i;
+
+ page_size = getpagesize();
+ mem_region = mmap(NULL, page_size * 2, PROT_READ|PROT_WRITE,
+ MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
+
+ FAIL_IF(mem_region == MAP_FAILED);
+
+ for (i = 0; i < page_size; i++)
+ mem_region[i] = i;
+
+ memset(mem_region+page_size, 0, page_size);
+
+ setup_segv_handler();
+
+ for (i = 0; i < page_size; i++)
+ FAIL_IF(do_one_test(mem_region+i, i));
+
+ FAIL_IF(segv_error);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(test_body, "load_unaligned_zeropad");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/primitives/word-at-a-time.h b/kernel/tools/testing/selftests/powerpc/primitives/word-at-a-time.h
new file mode 120000
index 000000000..eb74401b5
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/primitives/word-at-a-time.h
@@ -0,0 +1 @@
+../../../../../arch/powerpc/include/asm/word-at-a-time.h \ No newline at end of file
diff --git a/kernel/tools/testing/selftests/powerpc/stringloops/.gitignore b/kernel/tools/testing/selftests/powerpc/stringloops/.gitignore
new file mode 100644
index 000000000..0b43da74e
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/stringloops/.gitignore
@@ -0,0 +1 @@
+memcmp
diff --git a/kernel/tools/testing/selftests/powerpc/stringloops/Makefile b/kernel/tools/testing/selftests/powerpc/stringloops/Makefile
new file mode 100644
index 000000000..2a728f4d2
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/stringloops/Makefile
@@ -0,0 +1,15 @@
+# The loops are all 64-bit code
+CFLAGS += -m64
+CFLAGS += -I$(CURDIR)
+
+TEST_PROGS := memcmp
+EXTRA_SOURCES := memcmp_64.S ../harness.c
+
+all: $(TEST_PROGS)
+
+$(TEST_PROGS): $(EXTRA_SOURCES)
+
+include ../../lib.mk
+
+clean:
+ rm -f $(TEST_PROGS) *.o
diff --git a/kernel/tools/testing/selftests/powerpc/stringloops/asm/ppc_asm.h b/kernel/tools/testing/selftests/powerpc/stringloops/asm/ppc_asm.h
new file mode 100644
index 000000000..11bece87e
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/stringloops/asm/ppc_asm.h
@@ -0,0 +1,7 @@
+#include <ppc-asm.h>
+
+#ifndef r1
+#define r1 sp
+#endif
+
+#define _GLOBAL(A) FUNC_START(test_ ## A)
diff --git a/kernel/tools/testing/selftests/powerpc/stringloops/memcmp.c b/kernel/tools/testing/selftests/powerpc/stringloops/memcmp.c
new file mode 100644
index 000000000..17417dd70
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/stringloops/memcmp.c
@@ -0,0 +1,103 @@
+#include <malloc.h>
+#include <stdlib.h>
+#include <string.h>
+#include "../utils.h"
+
+#define SIZE 256
+#define ITERATIONS 10000
+
+int test_memcmp(const void *s1, const void *s2, size_t n);
+
+/* test all offsets and lengths */
+static void test_one(char *s1, char *s2)
+{
+ unsigned long offset, size;
+
+ for (offset = 0; offset < SIZE; offset++) {
+ for (size = 0; size < (SIZE-offset); size++) {
+ int x, y;
+ unsigned long i;
+
+ y = memcmp(s1+offset, s2+offset, size);
+ x = test_memcmp(s1+offset, s2+offset, size);
+
+ if (((x ^ y) < 0) && /* Trick to compare sign */
+ ((x | y) != 0)) { /* check for zero */
+ printf("memcmp returned %d, should have returned %d (offset %ld size %ld)\n", x, y, offset, size);
+
+ for (i = offset; i < offset+size; i++)
+ printf("%02x ", s1[i]);
+ printf("\n");
+
+ for (i = offset; i < offset+size; i++)
+ printf("%02x ", s2[i]);
+ printf("\n");
+ abort();
+ }
+ }
+ }
+}
+
+static int testcase(void)
+{
+ char *s1;
+ char *s2;
+ unsigned long i;
+
+ s1 = memalign(128, SIZE);
+ if (!s1) {
+ perror("memalign");
+ exit(1);
+ }
+
+ s2 = memalign(128, SIZE);
+ if (!s2) {
+ perror("memalign");
+ exit(1);
+ }
+
+ srandom(1);
+
+ for (i = 0; i < ITERATIONS; i++) {
+ unsigned long j;
+ unsigned long change;
+
+ for (j = 0; j < SIZE; j++)
+ s1[j] = random();
+
+ memcpy(s2, s1, SIZE);
+
+ /* change one byte */
+ change = random() % SIZE;
+ s2[change] = random() & 0xff;
+
+ test_one(s1, s2);
+ }
+
+ srandom(1);
+
+ for (i = 0; i < ITERATIONS; i++) {
+ unsigned long j;
+ unsigned long change;
+
+ for (j = 0; j < SIZE; j++)
+ s1[j] = random();
+
+ memcpy(s2, s1, SIZE);
+
+ /* change multiple bytes, 1/8 of total */
+ for (j = 0; j < SIZE / 8; j++) {
+ change = random() % SIZE;
+ s2[change] = random() & 0xff;
+ }
+
+ test_one(s1, s2);
+ }
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(testcase, "memcmp");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/stringloops/memcmp_64.S b/kernel/tools/testing/selftests/powerpc/stringloops/memcmp_64.S
new file mode 120000
index 000000000..9bc87e438
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/stringloops/memcmp_64.S
@@ -0,0 +1 @@
+../../../../../arch/powerpc/lib/memcmp_64.S \ No newline at end of file
diff --git a/kernel/tools/testing/selftests/powerpc/subunit.h b/kernel/tools/testing/selftests/powerpc/subunit.h
new file mode 100644
index 000000000..9c6c4e901
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/subunit.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2013, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#ifndef _SELFTESTS_POWERPC_SUBUNIT_H
+#define _SELFTESTS_POWERPC_SUBUNIT_H
+
+static inline void test_start(char *name)
+{
+ printf("test: %s\n", name);
+}
+
+static inline void test_failure_detail(char *name, char *detail)
+{
+ printf("failure: %s [%s]\n", name, detail);
+}
+
+static inline void test_failure(char *name)
+{
+ printf("failure: %s\n", name);
+}
+
+static inline void test_error(char *name)
+{
+ printf("error: %s\n", name);
+}
+
+static inline void test_skip(char *name)
+{
+ printf("skip: %s\n", name);
+}
+
+static inline void test_success(char *name)
+{
+ printf("success: %s\n", name);
+}
+
+static inline void test_finish(char *name, int status)
+{
+ if (status)
+ test_failure(name);
+ else
+ test_success(name);
+}
+
+static inline void test_set_git_version(char *value)
+{
+ printf("tags: git_version:%s\n", value);
+}
+
+#endif /* _SELFTESTS_POWERPC_SUBUNIT_H */
diff --git a/kernel/tools/testing/selftests/powerpc/switch_endian/.gitignore b/kernel/tools/testing/selftests/powerpc/switch_endian/.gitignore
new file mode 100644
index 000000000..89e762eab
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/switch_endian/.gitignore
@@ -0,0 +1,2 @@
+switch_endian_test
+check-reversed.S
diff --git a/kernel/tools/testing/selftests/powerpc/switch_endian/Makefile b/kernel/tools/testing/selftests/powerpc/switch_endian/Makefile
new file mode 100644
index 000000000..081473db2
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/switch_endian/Makefile
@@ -0,0 +1,24 @@
+CC := $(CROSS_COMPILE)gcc
+PROGS := switch_endian_test
+
+ASFLAGS += -O2 -Wall -g -nostdlib -m64
+
+all: $(PROGS)
+
+switch_endian_test: check-reversed.S
+
+check-reversed.o: check.o
+ $(CROSS_COMPILE)objcopy -j .text --reverse-bytes=4 -O binary $< $@
+
+check-reversed.S: check-reversed.o
+ hexdump -v -e '/1 ".byte 0x%02X\n"' $< > $@
+
+run_tests: all
+ @-for PROG in $(PROGS); do \
+ ./$$PROG; \
+ done;
+
+clean:
+ rm -f $(PROGS) *.o check-reversed.S
+
+.PHONY: all run_tests clean
diff --git a/kernel/tools/testing/selftests/powerpc/switch_endian/check.S b/kernel/tools/testing/selftests/powerpc/switch_endian/check.S
new file mode 100644
index 000000000..e2484d2c2
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/switch_endian/check.S
@@ -0,0 +1,100 @@
+#include "common.h"
+
+/*
+ * Checks that registers contain what we expect, ie. they were not clobbered by
+ * the syscall.
+ *
+ * r15: pattern to check registers against.
+ *
+ * At the end r3 == 0 if everything's OK.
+ */
+ nop # guaranteed to be illegal in reverse-endian
+ mr r9,r15
+ cmpd r9,r3 # check r3
+ bne 1f
+ addi r9,r15,4 # check r4
+ cmpd r9,r4
+ bne 1f
+ lis r9,0x00FF # check CR
+ ori r9,r9,0xF000
+ mfcr r10
+ and r10,r10,r9
+ cmpw r9,r10
+ addi r9,r15,34
+ bne 1f
+ addi r9,r15,32 # check LR
+ mflr r10
+ cmpd r9,r10
+ bne 1f
+ addi r9,r15,5 # check r5
+ cmpd r9,r5
+ bne 1f
+ addi r9,r15,6 # check r6
+ cmpd r9,r6
+ bne 1f
+ addi r9,r15,7 # check r7
+ cmpd r9,r7
+ bne 1f
+ addi r9,r15,8 # check r8
+ cmpd r9,r8
+ bne 1f
+ addi r9,r15,13 # check r13
+ cmpd r9,r13
+ bne 1f
+ addi r9,r15,14 # check r14
+ cmpd r9,r14
+ bne 1f
+ addi r9,r15,16 # check r16
+ cmpd r9,r16
+ bne 1f
+ addi r9,r15,17 # check r17
+ cmpd r9,r17
+ bne 1f
+ addi r9,r15,18 # check r18
+ cmpd r9,r18
+ bne 1f
+ addi r9,r15,19 # check r19
+ cmpd r9,r19
+ bne 1f
+ addi r9,r15,20 # check r20
+ cmpd r9,r20
+ bne 1f
+ addi r9,r15,21 # check r21
+ cmpd r9,r21
+ bne 1f
+ addi r9,r15,22 # check r22
+ cmpd r9,r22
+ bne 1f
+ addi r9,r15,23 # check r23
+ cmpd r9,r23
+ bne 1f
+ addi r9,r15,24 # check r24
+ cmpd r9,r24
+ bne 1f
+ addi r9,r15,25 # check r25
+ cmpd r9,r25
+ bne 1f
+ addi r9,r15,26 # check r26
+ cmpd r9,r26
+ bne 1f
+ addi r9,r15,27 # check r27
+ cmpd r9,r27
+ bne 1f
+ addi r9,r15,28 # check r28
+ cmpd r9,r28
+ bne 1f
+ addi r9,r15,29 # check r29
+ cmpd r9,r29
+ bne 1f
+ addi r9,r15,30 # check r30
+ cmpd r9,r30
+ bne 1f
+ addi r9,r15,31 # check r31
+ cmpd r9,r31
+ bne 1f
+ b 2f
+1: mr r3, r9
+ li r0, __NR_exit
+ sc
+2: li r0, __NR_switch_endian
+ nop
diff --git a/kernel/tools/testing/selftests/powerpc/switch_endian/common.h b/kernel/tools/testing/selftests/powerpc/switch_endian/common.h
new file mode 100644
index 000000000..69e399698
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/switch_endian/common.h
@@ -0,0 +1,6 @@
+#include <ppc-asm.h>
+#include <asm/unistd.h>
+
+#ifndef __NR_switch_endian
+#define __NR_switch_endian 363
+#endif
diff --git a/kernel/tools/testing/selftests/powerpc/switch_endian/switch_endian_test.S b/kernel/tools/testing/selftests/powerpc/switch_endian/switch_endian_test.S
new file mode 100644
index 000000000..ef7c971ab
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/switch_endian/switch_endian_test.S
@@ -0,0 +1,81 @@
+#include "common.h"
+
+ .data
+ .balign 8
+message:
+ .ascii "success: switch_endian_test\n\0"
+
+ .section ".toc"
+ .balign 8
+pattern:
+ .llong 0x5555AAAA5555AAAA
+
+ .text
+FUNC_START(_start)
+ /* Load the pattern */
+ ld r15, pattern@TOC(%r2)
+
+ /* Setup CR, only CR2-CR4 are maintained */
+ lis r3, 0x00FF
+ ori r3, r3, 0xF000
+ mtcr r3
+
+ /* Load the pattern slightly modified into the registers */
+ mr r3, r15
+ addi r4, r15, 4
+
+ addi r5, r15, 32
+ mtlr r5
+
+ addi r5, r15, 5
+ addi r6, r15, 6
+ addi r7, r15, 7
+ addi r8, r15, 8
+
+ /* r9 - r12 are clobbered */
+
+ addi r13, r15, 13
+ addi r14, r15, 14
+
+ /* Skip r15 we're using it */
+
+ addi r16, r15, 16
+ addi r17, r15, 17
+ addi r18, r15, 18
+ addi r19, r15, 19
+ addi r20, r15, 20
+ addi r21, r15, 21
+ addi r22, r15, 22
+ addi r23, r15, 23
+ addi r24, r15, 24
+ addi r25, r15, 25
+ addi r26, r15, 26
+ addi r27, r15, 27
+ addi r28, r15, 28
+ addi r29, r15, 29
+ addi r30, r15, 30
+ addi r31, r15, 31
+
+ /*
+ * Call the syscall to switch endian.
+ * It clobbers r9-r12, XER, CTR and CR0-1,5-7.
+ */
+ li r0, __NR_switch_endian
+ sc
+
+#include "check-reversed.S"
+
+ /* Flip back, r0 already has the switch syscall number */
+ .long 0x02000044 /* sc */
+
+#include "check.S"
+
+ li r0, __NR_write
+ li r3, 1 /* stdout */
+ ld r4, message@got(%r2)
+ li r5, 28 /* strlen(message3) */
+ sc
+ li r0, __NR_exit
+ li r3, 0
+ sc
+ b .
diff --git a/kernel/tools/testing/selftests/powerpc/tm/.gitignore b/kernel/tools/testing/selftests/powerpc/tm/.gitignore
new file mode 100644
index 000000000..2699635d2
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/tm/.gitignore
@@ -0,0 +1,2 @@
+tm-resched-dscr
+tm-syscall
diff --git a/kernel/tools/testing/selftests/powerpc/tm/Makefile b/kernel/tools/testing/selftests/powerpc/tm/Makefile
new file mode 100644
index 000000000..6bff955e1
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/tm/Makefile
@@ -0,0 +1,13 @@
+TEST_PROGS := tm-resched-dscr
+
+all: $(TEST_PROGS)
+
+$(TEST_PROGS): ../harness.c
+
+tm-syscall: tm-syscall-asm.S
+tm-syscall: CFLAGS += -mhtm
+
+include ../../lib.mk
+
+clean:
+ rm -f $(TEST_PROGS) *.o
diff --git a/kernel/tools/testing/selftests/powerpc/tm/tm-resched-dscr.c b/kernel/tools/testing/selftests/powerpc/tm/tm-resched-dscr.c
new file mode 100644
index 000000000..42d4c8caa
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/tm/tm-resched-dscr.c
@@ -0,0 +1,98 @@
+/* Test context switching to see if the DSCR SPR is correctly preserved
+ * when within a transaction.
+ *
+ * Note: We assume that the DSCR has been left at the default value (0)
+ * for all CPUs.
+ *
+ * Method:
+ *
+ * Set a value into the DSCR.
+ *
+ * Start a transaction, and suspend it (*).
+ *
+ * Hard loop checking to see if the transaction has become doomed.
+ *
+ * Now that we *may* have been preempted, record the DSCR and TEXASR SPRS.
+ *
+ * If the abort was because of a context switch, check the DSCR value.
+ * Otherwise, try again.
+ *
+ * (*) If the transaction is not suspended we can't see the problem because
+ * the transaction abort handler will restore the DSCR to it's checkpointed
+ * value before we regain control.
+ */
+
+#include <inttypes.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <assert.h>
+#include <asm/tm.h>
+
+#include "utils.h"
+
+#define TBEGIN ".long 0x7C00051D ;"
+#define TEND ".long 0x7C00055D ;"
+#define TCHECK ".long 0x7C00059C ;"
+#define TSUSPEND ".long 0x7C0005DD ;"
+#define TRESUME ".long 0x7C2005DD ;"
+#define SPRN_TEXASR 0x82
+#define SPRN_DSCR 0x03
+
+int test_body(void)
+{
+ uint64_t rv, dscr1 = 1, dscr2, texasr;
+
+ printf("Check DSCR TM context switch: ");
+ fflush(stdout);
+ for (;;) {
+ rv = 1;
+ asm __volatile__ (
+ /* set a known value into the DSCR */
+ "ld 3, %[dscr1];"
+ "mtspr %[sprn_dscr], 3;"
+
+ /* start and suspend a transaction */
+ TBEGIN
+ "beq 1f;"
+ TSUSPEND
+
+ /* hard loop until the transaction becomes doomed */
+ "2: ;"
+ TCHECK
+ "bc 4, 0, 2b;"
+
+ /* record DSCR and TEXASR */
+ "mfspr 3, %[sprn_dscr];"
+ "std 3, %[dscr2];"
+ "mfspr 3, %[sprn_texasr];"
+ "std 3, %[texasr];"
+
+ TRESUME
+ TEND
+ "li %[rv], 0;"
+ "1: ;"
+ : [rv]"=r"(rv), [dscr2]"=m"(dscr2), [texasr]"=m"(texasr)
+ : [dscr1]"m"(dscr1)
+ , [sprn_dscr]"i"(SPRN_DSCR), [sprn_texasr]"i"(SPRN_TEXASR)
+ : "memory", "r3"
+ );
+ assert(rv); /* make sure the transaction aborted */
+ if ((texasr >> 56) != TM_CAUSE_RESCHED) {
+ putchar('.');
+ fflush(stdout);
+ continue;
+ }
+ if (dscr2 != dscr1) {
+ printf(" FAIL\n");
+ return 1;
+ } else {
+ printf(" OK\n");
+ return 0;
+ }
+ }
+}
+
+int main(void)
+{
+ return test_harness(test_body, "tm_resched_dscr");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/tm/tm-syscall-asm.S b/kernel/tools/testing/selftests/powerpc/tm/tm-syscall-asm.S
new file mode 100644
index 000000000..431f61ae2
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/tm/tm-syscall-asm.S
@@ -0,0 +1,27 @@
+#include <ppc-asm.h>
+#include <asm/unistd.h>
+
+ .text
+FUNC_START(getppid_tm_active)
+ tbegin.
+ beq 1f
+ li r0, __NR_getppid
+ sc
+ tend.
+ blr
+1:
+ li r3, -1
+ blr
+
+FUNC_START(getppid_tm_suspended)
+ tbegin.
+ beq 1f
+ li r0, __NR_getppid
+ tsuspend.
+ sc
+ tresume.
+ tend.
+ blr
+1:
+ li r3, -1
+ blr
diff --git a/kernel/tools/testing/selftests/powerpc/tm/tm-syscall.c b/kernel/tools/testing/selftests/powerpc/tm/tm-syscall.c
new file mode 100644
index 000000000..3ed8d4b25
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/tm/tm-syscall.c
@@ -0,0 +1,121 @@
+/*
+ * Copyright 2015, Sam Bobroff, IBM Corp.
+ * Licensed under GPLv2.
+ *
+ * Test the kernel's system call code to ensure that a system call
+ * made from within an active HTM transaction is aborted with the
+ * correct failure code.
+ * Conversely, ensure that a system call made from within a
+ * suspended transaction can succeed.
+ */
+
+#include <stdio.h>
+#include <unistd.h>
+#include <sys/syscall.h>
+#include <asm/tm.h>
+#include <asm/cputable.h>
+#include <linux/auxvec.h>
+#include <sys/time.h>
+#include <stdlib.h>
+
+#include "utils.h"
+
+extern int getppid_tm_active(void);
+extern int getppid_tm_suspended(void);
+
+unsigned retries = 0;
+
+#define TEST_DURATION 10 /* seconds */
+#define TM_RETRIES 100
+
+long failure_code(void)
+{
+ return __builtin_get_texasru() >> 24;
+}
+
+bool failure_is_persistent(void)
+{
+ return (failure_code() & TM_CAUSE_PERSISTENT) == TM_CAUSE_PERSISTENT;
+}
+
+bool failure_is_syscall(void)
+{
+ return (failure_code() & TM_CAUSE_SYSCALL) == TM_CAUSE_SYSCALL;
+}
+
+pid_t getppid_tm(bool suspend)
+{
+ int i;
+ pid_t pid;
+
+ for (i = 0; i < TM_RETRIES; i++) {
+ if (suspend)
+ pid = getppid_tm_suspended();
+ else
+ pid = getppid_tm_active();
+
+ if (pid >= 0)
+ return pid;
+
+ if (failure_is_persistent()) {
+ if (failure_is_syscall())
+ return -1;
+
+ printf("Unexpected persistent transaction failure.\n");
+ printf("TEXASR 0x%016lx, TFIAR 0x%016lx.\n",
+ __builtin_get_texasr(), __builtin_get_tfiar());
+ exit(-1);
+ }
+
+ retries++;
+ }
+
+ printf("Exceeded limit of %d temporary transaction failures.\n", TM_RETRIES);
+ printf("TEXASR 0x%016lx, TFIAR 0x%016lx.\n",
+ __builtin_get_texasr(), __builtin_get_tfiar());
+
+ exit(-1);
+}
+
+int tm_syscall(void)
+{
+ unsigned count = 0;
+ struct timeval end, now;
+
+ SKIP_IF(!((long)get_auxv_entry(AT_HWCAP2) & PPC_FEATURE2_HTM));
+ setbuf(stdout, NULL);
+
+ printf("Testing transactional syscalls for %d seconds...\n", TEST_DURATION);
+
+ gettimeofday(&end, NULL);
+ now.tv_sec = TEST_DURATION;
+ now.tv_usec = 0;
+ timeradd(&end, &now, &end);
+
+ for (count = 0; timercmp(&now, &end, <); count++) {
+ /*
+ * Test a syscall within a suspended transaction and verify
+ * that it succeeds.
+ */
+ FAIL_IF(getppid_tm(true) == -1); /* Should succeed. */
+
+ /*
+ * Test a syscall within an active transaction and verify that
+ * it fails with the correct failure code.
+ */
+ FAIL_IF(getppid_tm(false) != -1); /* Should fail... */
+ FAIL_IF(!failure_is_persistent()); /* ...persistently... */
+ FAIL_IF(!failure_is_syscall()); /* ...with code syscall. */
+ gettimeofday(&now, 0);
+ }
+
+ printf("%d active and suspended transactions behaved correctly.\n", count);
+ printf("(There were %d transaction retries.)\n", retries);
+
+ return 0;
+}
+
+int main(void)
+{
+ return test_harness(tm_syscall, "tm_syscall");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/utils.h b/kernel/tools/testing/selftests/powerpc/utils.h
new file mode 100644
index 000000000..b7d41086b
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/utils.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2013, Michael Ellerman, IBM Corp.
+ * Licensed under GPLv2.
+ */
+
+#ifndef _SELFTESTS_POWERPC_UTILS_H
+#define _SELFTESTS_POWERPC_UTILS_H
+
+#include <stdint.h>
+#include <stdbool.h>
+
+/* Avoid headaches with PRI?64 - just use %ll? always */
+typedef unsigned long long u64;
+typedef signed long long s64;
+
+/* Just for familiarity */
+typedef uint32_t u32;
+typedef uint16_t u16;
+typedef uint8_t u8;
+
+
+int test_harness(int (test_function)(void), char *name);
+extern void *get_auxv_entry(int type);
+
+/* Yes, this is evil */
+#define FAIL_IF(x) \
+do { \
+ if ((x)) { \
+ fprintf(stderr, \
+ "[FAIL] Test FAILED on line %d\n", __LINE__); \
+ return 1; \
+ } \
+} while (0)
+
+/* The test harness uses this, yes it's gross */
+#define MAGIC_SKIP_RETURN_VALUE 99
+
+#define SKIP_IF(x) \
+do { \
+ if ((x)) { \
+ fprintf(stderr, \
+ "[SKIP] Test skipped on line %d\n", __LINE__); \
+ return MAGIC_SKIP_RETURN_VALUE; \
+ } \
+} while (0)
+
+#define _str(s) #s
+#define str(s) _str(s)
+
+#endif /* _SELFTESTS_POWERPC_UTILS_H */
diff --git a/kernel/tools/testing/selftests/powerpc/vphn/.gitignore b/kernel/tools/testing/selftests/powerpc/vphn/.gitignore
new file mode 100644
index 000000000..7c0439501
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/vphn/.gitignore
@@ -0,0 +1 @@
+test-vphn
diff --git a/kernel/tools/testing/selftests/powerpc/vphn/Makefile b/kernel/tools/testing/selftests/powerpc/vphn/Makefile
new file mode 100644
index 000000000..e539f775f
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/vphn/Makefile
@@ -0,0 +1,15 @@
+PROG := test-vphn
+
+CFLAGS += -m64
+
+all: $(PROG)
+
+$(PROG): ../harness.c
+
+run_tests: all
+ ./$(PROG)
+
+clean:
+ rm -f $(PROG)
+
+.PHONY: all run_tests clean
diff --git a/kernel/tools/testing/selftests/powerpc/vphn/test-vphn.c b/kernel/tools/testing/selftests/powerpc/vphn/test-vphn.c
new file mode 100644
index 000000000..5742f6876
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/vphn/test-vphn.c
@@ -0,0 +1,410 @@
+#include <stdio.h>
+#include <byteswap.h>
+#include "utils.h"
+#include "subunit.h"
+
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+#define cpu_to_be32(x) bswap_32(x)
+#define be32_to_cpu(x) bswap_32(x)
+#define be16_to_cpup(x) bswap_16(*x)
+#define cpu_to_be64(x) bswap_64(x)
+#else
+#define cpu_to_be32(x) (x)
+#define be32_to_cpu(x) (x)
+#define be16_to_cpup(x) (*x)
+#define cpu_to_be64(x) (x)
+#endif
+
+#include "vphn.c"
+
+static struct test {
+ char *descr;
+ long input[VPHN_REGISTER_COUNT];
+ u32 expected[VPHN_ASSOC_BUFSIZE];
+} all_tests[] = {
+ {
+ "vphn: no data",
+ {
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ },
+ {
+ 0x00000000
+ }
+ },
+ {
+ "vphn: 1 x 16-bit value",
+ {
+ 0x8001ffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ },
+ {
+ 0x00000001,
+ 0x00000001
+ }
+ },
+ {
+ "vphn: 2 x 16-bit values",
+ {
+ 0x80018002ffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ },
+ {
+ 0x00000002,
+ 0x00000001,
+ 0x00000002
+ }
+ },
+ {
+ "vphn: 3 x 16-bit values",
+ {
+ 0x800180028003ffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ },
+ {
+ 0x00000003,
+ 0x00000001,
+ 0x00000002,
+ 0x00000003
+ }
+ },
+ {
+ "vphn: 4 x 16-bit values",
+ {
+ 0x8001800280038004,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ },
+ {
+ 0x00000004,
+ 0x00000001,
+ 0x00000002,
+ 0x00000003,
+ 0x00000004
+ }
+ },
+ {
+ /* Parsing the next 16-bit value out of the next 64-bit input
+ * value.
+ */
+ "vphn: 5 x 16-bit values",
+ {
+ 0x8001800280038004,
+ 0x8005ffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ },
+ {
+ 0x00000005,
+ 0x00000001,
+ 0x00000002,
+ 0x00000003,
+ 0x00000004,
+ 0x00000005
+ }
+ },
+ {
+ /* Parse at most 6 x 64-bit input values */
+ "vphn: 24 x 16-bit values",
+ {
+ 0x8001800280038004,
+ 0x8005800680078008,
+ 0x8009800a800b800c,
+ 0x800d800e800f8010,
+ 0x8011801280138014,
+ 0x8015801680178018
+ },
+ {
+ 0x00000018,
+ 0x00000001,
+ 0x00000002,
+ 0x00000003,
+ 0x00000004,
+ 0x00000005,
+ 0x00000006,
+ 0x00000007,
+ 0x00000008,
+ 0x00000009,
+ 0x0000000a,
+ 0x0000000b,
+ 0x0000000c,
+ 0x0000000d,
+ 0x0000000e,
+ 0x0000000f,
+ 0x00000010,
+ 0x00000011,
+ 0x00000012,
+ 0x00000013,
+ 0x00000014,
+ 0x00000015,
+ 0x00000016,
+ 0x00000017,
+ 0x00000018
+ }
+ },
+ {
+ "vphn: 1 x 32-bit value",
+ {
+ 0x00000001ffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff
+ },
+ {
+ 0x00000001,
+ 0x00000001
+ }
+ },
+ {
+ "vphn: 2 x 32-bit values",
+ {
+ 0x0000000100000002,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff
+ },
+ {
+ 0x00000002,
+ 0x00000001,
+ 0x00000002
+ }
+ },
+ {
+ /* Parsing the next 32-bit value out of the next 64-bit input
+ * value.
+ */
+ "vphn: 3 x 32-bit values",
+ {
+ 0x0000000100000002,
+ 0x00000003ffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff
+ },
+ {
+ 0x00000003,
+ 0x00000001,
+ 0x00000002,
+ 0x00000003
+ }
+ },
+ {
+ /* Parse at most 6 x 64-bit input values */
+ "vphn: 12 x 32-bit values",
+ {
+ 0x0000000100000002,
+ 0x0000000300000004,
+ 0x0000000500000006,
+ 0x0000000700000008,
+ 0x000000090000000a,
+ 0x0000000b0000000c
+ },
+ {
+ 0x0000000c,
+ 0x00000001,
+ 0x00000002,
+ 0x00000003,
+ 0x00000004,
+ 0x00000005,
+ 0x00000006,
+ 0x00000007,
+ 0x00000008,
+ 0x00000009,
+ 0x0000000a,
+ 0x0000000b,
+ 0x0000000c
+ }
+ },
+ {
+ "vphn: 16-bit value followed by 32-bit value",
+ {
+ 0x800100000002ffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff
+ },
+ {
+ 0x00000002,
+ 0x00000001,
+ 0x00000002
+ }
+ },
+ {
+ "vphn: 32-bit value followed by 16-bit value",
+ {
+ 0x000000018002ffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff
+ },
+ {
+ 0x00000002,
+ 0x00000001,
+ 0x00000002
+ }
+ },
+ {
+ /* Parse a 32-bit value split accross two consecutives 64-bit
+ * input values.
+ */
+ "vphn: 16-bit value followed by 2 x 32-bit values",
+ {
+ 0x8001000000020000,
+ 0x0003ffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff
+ },
+ {
+ 0x00000003,
+ 0x00000001,
+ 0x00000002,
+ 0x00000003,
+ 0x00000004,
+ 0x00000005
+ }
+ },
+ {
+ /* The lower bits in 0x0001ffff don't get mixed up with the
+ * 0xffff terminator.
+ */
+ "vphn: 32-bit value has all ones in 16 lower bits",
+ {
+ 0x0001ffff80028003,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff,
+ 0xffffffffffffffff
+ },
+ {
+ 0x00000003,
+ 0x0001ffff,
+ 0x00000002,
+ 0x00000003
+ }
+ },
+ {
+ /* The following input doesn't follow the specification.
+ */
+ "vphn: last 32-bit value is truncated",
+ {
+ 0x0000000100000002,
+ 0x0000000300000004,
+ 0x0000000500000006,
+ 0x0000000700000008,
+ 0x000000090000000a,
+ 0x0000000b800c2bad
+ },
+ {
+ 0x0000000c,
+ 0x00000001,
+ 0x00000002,
+ 0x00000003,
+ 0x00000004,
+ 0x00000005,
+ 0x00000006,
+ 0x00000007,
+ 0x00000008,
+ 0x00000009,
+ 0x0000000a,
+ 0x0000000b,
+ 0x0000000c
+ }
+ },
+ {
+ "vphn: garbage after terminator",
+ {
+ 0xffff2bad2bad2bad,
+ 0x2bad2bad2bad2bad,
+ 0x2bad2bad2bad2bad,
+ 0x2bad2bad2bad2bad,
+ 0x2bad2bad2bad2bad,
+ 0x2bad2bad2bad2bad
+ },
+ {
+ 0x00000000
+ }
+ },
+ {
+ NULL
+ }
+};
+
+static int test_one(struct test *test)
+{
+ __be32 output[VPHN_ASSOC_BUFSIZE] = { 0 };
+ int i, len;
+
+ vphn_unpack_associativity(test->input, output);
+
+ len = be32_to_cpu(output[0]);
+ if (len != test->expected[0]) {
+ printf("expected %d elements, got %d\n", test->expected[0],
+ len);
+ return 1;
+ }
+
+ for (i = 1; i < len; i++) {
+ u32 val = be32_to_cpu(output[i]);
+ if (val != test->expected[i]) {
+ printf("element #%d is 0x%x, should be 0x%x\n", i, val,
+ test->expected[i]);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static int test_vphn(void)
+{
+ static struct test *test;
+
+ for (test = all_tests; test->descr; test++) {
+ int ret;
+
+ ret = test_one(test);
+ test_finish(test->descr, ret);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+int main(int argc, char **argv)
+{
+ return test_harness(test_vphn, "test-vphn");
+}
diff --git a/kernel/tools/testing/selftests/powerpc/vphn/vphn.c b/kernel/tools/testing/selftests/powerpc/vphn/vphn.c
new file mode 120000
index 000000000..186b906e6
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/vphn/vphn.c
@@ -0,0 +1 @@
+../../../../../arch/powerpc/mm/vphn.c \ No newline at end of file
diff --git a/kernel/tools/testing/selftests/powerpc/vphn/vphn.h b/kernel/tools/testing/selftests/powerpc/vphn/vphn.h
new file mode 120000
index 000000000..7131efe38
--- /dev/null
+++ b/kernel/tools/testing/selftests/powerpc/vphn/vphn.h
@@ -0,0 +1 @@
+../../../../../arch/powerpc/mm/vphn.h \ No newline at end of file
diff --git a/kernel/tools/testing/selftests/ptrace/Makefile b/kernel/tools/testing/selftests/ptrace/Makefile
new file mode 100644
index 000000000..453927fea
--- /dev/null
+++ b/kernel/tools/testing/selftests/ptrace/Makefile
@@ -0,0 +1,11 @@
+CFLAGS += -iquote../../../../include/uapi -Wall
+peeksiginfo: peeksiginfo.c
+
+all: peeksiginfo
+
+clean:
+ rm -f peeksiginfo
+
+TEST_PROGS := peeksiginfo
+
+include ../lib.mk
diff --git a/kernel/tools/testing/selftests/ptrace/peeksiginfo.c b/kernel/tools/testing/selftests/ptrace/peeksiginfo.c
new file mode 100644
index 000000000..c34cd8ac8
--- /dev/null
+++ b/kernel/tools/testing/selftests/ptrace/peeksiginfo.c
@@ -0,0 +1,218 @@
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <signal.h>
+#include <unistd.h>
+#include <errno.h>
+#include <linux/types.h>
+#include <sys/wait.h>
+#include <sys/syscall.h>
+#include <sys/user.h>
+#include <sys/mman.h>
+
+#include "linux/ptrace.h"
+
+static int sys_rt_sigqueueinfo(pid_t tgid, int sig, siginfo_t *uinfo)
+{
+ return syscall(SYS_rt_sigqueueinfo, tgid, sig, uinfo);
+}
+
+static int sys_rt_tgsigqueueinfo(pid_t tgid, pid_t tid,
+ int sig, siginfo_t *uinfo)
+{
+ return syscall(SYS_rt_tgsigqueueinfo, tgid, tid, sig, uinfo);
+}
+
+static int sys_ptrace(int request, pid_t pid, void *addr, void *data)
+{
+ return syscall(SYS_ptrace, request, pid, addr, data);
+}
+
+#define SIGNR 10
+#define TEST_SICODE_PRIV -1
+#define TEST_SICODE_SHARE -2
+
+#ifndef PAGE_SIZE
+#define PAGE_SIZE sysconf(_SC_PAGESIZE)
+#endif
+
+#define err(fmt, ...) \
+ fprintf(stderr, \
+ "Error (%s:%d): " fmt, \
+ __FILE__, __LINE__, ##__VA_ARGS__)
+
+static int check_error_paths(pid_t child)
+{
+ struct ptrace_peeksiginfo_args arg;
+ int ret, exit_code = -1;
+ void *addr_rw, *addr_ro;
+
+ /*
+ * Allocate two contiguous pages. The first one is for read-write,
+ * another is for read-only.
+ */
+ addr_rw = mmap(NULL, 2 * PAGE_SIZE, PROT_READ | PROT_WRITE,
+ MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ if (addr_rw == MAP_FAILED) {
+ err("mmap() failed: %m\n");
+ return 1;
+ }
+
+ addr_ro = mmap(addr_rw + PAGE_SIZE, PAGE_SIZE, PROT_READ,
+ MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0);
+ if (addr_ro == MAP_FAILED) {
+ err("mmap() failed: %m\n");
+ goto out;
+ }
+
+ arg.nr = SIGNR;
+ arg.off = 0;
+
+ /* Unsupported flags */
+ arg.flags = ~0;
+ ret = sys_ptrace(PTRACE_PEEKSIGINFO, child, &arg, addr_rw);
+ if (ret != -1 || errno != EINVAL) {
+ err("sys_ptrace() returns %d (expected -1),"
+ " errno %d (expected %d): %m\n",
+ ret, errno, EINVAL);
+ goto out;
+ }
+ arg.flags = 0;
+
+ /* A part of the buffer is read-only */
+ ret = sys_ptrace(PTRACE_PEEKSIGINFO, child, &arg,
+ addr_ro - sizeof(siginfo_t) * 2);
+ if (ret != 2) {
+ err("sys_ptrace() returns %d (expected 2): %m\n", ret);
+ goto out;
+ }
+
+ /* Read-only buffer */
+ ret = sys_ptrace(PTRACE_PEEKSIGINFO, child, &arg, addr_ro);
+ if (ret != -1 && errno != EFAULT) {
+ err("sys_ptrace() returns %d (expected -1),"
+ " errno %d (expected %d): %m\n",
+ ret, errno, EFAULT);
+ goto out;
+ }
+
+ exit_code = 0;
+out:
+ munmap(addr_rw, 2 * PAGE_SIZE);
+ return exit_code;
+}
+
+int check_direct_path(pid_t child, int shared, int nr)
+{
+ struct ptrace_peeksiginfo_args arg = {.flags = 0, .nr = nr, .off = 0};
+ int i, j, ret, exit_code = -1;
+ siginfo_t siginfo[SIGNR];
+ int si_code;
+
+ if (shared == 1) {
+ arg.flags = PTRACE_PEEKSIGINFO_SHARED;
+ si_code = TEST_SICODE_SHARE;
+ } else {
+ arg.flags = 0;
+ si_code = TEST_SICODE_PRIV;
+ }
+
+ for (i = 0; i < SIGNR; ) {
+ arg.off = i;
+ ret = sys_ptrace(PTRACE_PEEKSIGINFO, child, &arg, siginfo);
+ if (ret == -1) {
+ err("ptrace() failed: %m\n");
+ goto out;
+ }
+
+ if (ret == 0)
+ break;
+
+ for (j = 0; j < ret; j++, i++) {
+ if (siginfo[j].si_code == si_code &&
+ siginfo[j].si_int == i)
+ continue;
+
+ err("%d: Wrong siginfo i=%d si_code=%d si_int=%d\n",
+ shared, i, siginfo[j].si_code, siginfo[j].si_int);
+ goto out;
+ }
+ }
+
+ if (i != SIGNR) {
+ err("Only %d signals were read\n", i);
+ goto out;
+ }
+
+ exit_code = 0;
+out:
+ return exit_code;
+}
+
+int main(int argc, char *argv[])
+{
+ siginfo_t siginfo[SIGNR];
+ int i, exit_code = 1;
+ sigset_t blockmask;
+ pid_t child;
+
+ sigemptyset(&blockmask);
+ sigaddset(&blockmask, SIGRTMIN);
+ sigprocmask(SIG_BLOCK, &blockmask, NULL);
+
+ child = fork();
+ if (child == -1) {
+ err("fork() failed: %m");
+ return 1;
+ } else if (child == 0) {
+ pid_t ppid = getppid();
+ while (1) {
+ if (ppid != getppid())
+ break;
+ sleep(1);
+ }
+ return 1;
+ }
+
+ /* Send signals in process-wide and per-thread queues */
+ for (i = 0; i < SIGNR; i++) {
+ siginfo->si_code = TEST_SICODE_SHARE;
+ siginfo->si_int = i;
+ sys_rt_sigqueueinfo(child, SIGRTMIN, siginfo);
+
+ siginfo->si_code = TEST_SICODE_PRIV;
+ siginfo->si_int = i;
+ sys_rt_tgsigqueueinfo(child, child, SIGRTMIN, siginfo);
+ }
+
+ if (sys_ptrace(PTRACE_ATTACH, child, NULL, NULL) == -1)
+ return 1;
+
+ waitpid(child, NULL, 0);
+
+ /* Dump signals one by one*/
+ if (check_direct_path(child, 0, 1))
+ goto out;
+ /* Dump all signals for one call */
+ if (check_direct_path(child, 0, SIGNR))
+ goto out;
+
+ /*
+ * Dump signal from the process-wide queue.
+ * The number of signals is not multible to the buffer size
+ */
+ if (check_direct_path(child, 1, 3))
+ goto out;
+
+ if (check_error_paths(child))
+ goto out;
+
+ printf("PASS\n");
+ exit_code = 0;
+out:
+ if (sys_ptrace(PTRACE_KILL, child, NULL, NULL) == -1)
+ return 1;
+
+ waitpid(child, NULL, 0);
+
+ return exit_code;
+}
diff --git a/kernel/tools/testing/selftests/rcutorture/.gitignore b/kernel/tools/testing/selftests/rcutorture/.gitignore
new file mode 100644
index 000000000..05838f6f2
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/.gitignore
@@ -0,0 +1,6 @@
+initrd
+linux-2.6
+b[0-9]*
+rcu-test-image
+res
+*.swp
diff --git a/kernel/tools/testing/selftests/rcutorture/bin/config2frag.sh b/kernel/tools/testing/selftests/rcutorture/bin/config2frag.sh
new file mode 100755
index 000000000..56f51ae13
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/bin/config2frag.sh
@@ -0,0 +1,25 @@
+#!/bin/bash
+# Usage: config2frag.sh < .config > configfrag
+#
+# Converts the "# CONFIG_XXX is not set" to "CONFIG_XXX=n" so that the
+# resulting file becomes a legitimate Kconfig fragment.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, you can access it online at
+# http://www.gnu.org/licenses/gpl-2.0.html.
+#
+# Copyright (C) IBM Corporation, 2013
+#
+# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+LANG=C sed -e 's/^# CONFIG_\([a-zA-Z0-9_]*\) is not set$/CONFIG_\1=n/'
diff --git a/kernel/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh b/kernel/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh
new file mode 100755
index 000000000..43540f182
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/bin/configNR_CPUS.sh
@@ -0,0 +1,45 @@
+#!/bin/bash
+#
+# Extract the number of CPUs expected from the specified Kconfig-file
+# fragment by checking CONFIG_SMP and CONFIG_NR_CPUS. If the specified
+# file gives no clue, base the number on the number of idle CPUs on
+# the system.
+#
+# Usage: configNR_CPUS.sh config-frag
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, you can access it online at
+# http://www.gnu.org/licenses/gpl-2.0.html.
+#
+# Copyright (C) IBM Corporation, 2013
+#
+# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+cf=$1
+if test ! -r $cf
+then
+ echo Unreadable config fragment $cf 1>&2
+ exit -1
+fi
+if grep -q '^CONFIG_SMP=n$' $cf
+then
+ echo 1
+ exit 0
+fi
+if grep -q '^CONFIG_NR_CPUS=' $cf
+then
+ grep '^CONFIG_NR_CPUS=' $cf |
+ sed -e 's/^CONFIG_NR_CPUS=\([0-9]*\).*$/\1/'
+ exit 0
+fi
+cpus2use.sh
diff --git a/kernel/tools/testing/selftests/rcutorture/bin/configcheck.sh b/kernel/tools/testing/selftests/rcutorture/bin/configcheck.sh
new file mode 100755
index 000000000..eee31e261
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/bin/configcheck.sh
@@ -0,0 +1,54 @@
+#!/bin/bash
+# Usage: configcheck.sh .config .config-template
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, you can access it online at
+# http://www.gnu.org/licenses/gpl-2.0.html.
+#
+# Copyright (C) IBM Corporation, 2011
+#
+# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+T=/tmp/abat-chk-config.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+cat $1 > $T/.config
+
+cat $2 | sed -e 's/\(.*\)=n/# \1 is not set/' -e 's/^#CHECK#//' |
+awk '
+BEGIN {
+ print "if grep -q \"" $0 "\" < '"$T/.config"'";
+ print "then";
+ print "\t:";
+ print "else";
+ if ($1 == "#") {
+ print "\tif grep -q \"" $2 "\" < '"$T/.config"'";
+ print "\tthen";
+ print "\t\tif test \"$firsttime\" = \"\""
+ print "\t\tthen"
+ print "\t\t\tfirsttime=1"
+ print "\t\tfi"
+ print "\t\techo \":" $2 ": improperly set\"";
+ print "\telse";
+ print "\t\t:";
+ print "\tfi";
+ } else {
+ print "\tif test \"$firsttime\" = \"\""
+ print "\tthen"
+ print "\t\tfirsttime=1"
+ print "\tfi"
+ print "\techo \":" $0 ": improperly set\"";
+ }
+ print "fi";
+ }' | sh
diff --git a/kernel/tools/testing/selftests/rcutorture/bin/configinit.sh b/kernel/tools/testing/selftests/rcutorture/bin/configinit.sh
new file mode 100755
index 000000000..15f1a17ca
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/bin/configinit.sh
@@ -0,0 +1,74 @@
+#!/bin/bash
+#
+# Usage: configinit.sh config-spec-file [ build output dir ]
+#
+# Create a .config file from the spec file. Run from the kernel source tree.
+# Exits with 0 if all went well, with 1 if all went well but the config
+# did not match, and some other number for other failures.
+#
+# The first argument is the .config specification file, which contains
+# desired settings, for example, "CONFIG_NO_HZ=y". For best results,
+# this should be a full pathname.
+#
+# The second argument is a optional path to a build output directory,
+# for example, "O=/tmp/foo". If this argument is omitted, the .config
+# file will be generated directly in the current directory.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, you can access it online at
+# http://www.gnu.org/licenses/gpl-2.0.html.
+#
+# Copyright (C) IBM Corporation, 2013
+#
+# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+T=/tmp/configinit.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+# Capture config spec file.
+
+c=$1
+buildloc=$2
+builddir=
+if test -n $buildloc
+then
+ if echo $buildloc | grep -q '^O='
+ then
+ builddir=`echo $buildloc | sed -e 's/^O=//'`
+ if test ! -d $builddir
+ then
+ mkdir $builddir
+ fi
+ else
+ echo Bad build directory: \"$builddir\"
+ exit 2
+ fi
+fi
+
+sed -e 's/^\(CONFIG[0-9A-Z_]*\)=.*$/grep -v "^# \1" |/' < $c > $T/u.sh
+sed -e 's/^\(CONFIG[0-9A-Z_]*=\).*$/grep -v \1 |/' < $c >> $T/u.sh
+grep '^grep' < $T/u.sh > $T/upd.sh
+echo "cat - $c" >> $T/upd.sh
+make mrproper
+make $buildloc distclean > $builddir/Make.distclean 2>&1
+make $buildloc $TORTURE_DEFCONFIG > $builddir/Make.defconfig.out 2>&1
+mv $builddir/.config $builddir/.config.sav
+sh $T/upd.sh < $builddir/.config.sav > $builddir/.config
+cp $builddir/.config $builddir/.config.new
+yes '' | make $buildloc oldconfig > $builddir/Make.modconfig.out 2>&1
+
+# verify new config matches specification.
+configcheck.sh $builddir/.config $c
+
+exit 0
diff --git a/kernel/tools/testing/selftests/rcutorture/bin/cpus2use.sh b/kernel/tools/testing/selftests/rcutorture/bin/cpus2use.sh
new file mode 100755
index 000000000..bb99cde3f
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/bin/cpus2use.sh
@@ -0,0 +1,41 @@
+#!/bin/bash
+#
+# Get an estimate of how CPU-hoggy to be.
+#
+# Usage: cpus2use.sh
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, you can access it online at
+# http://www.gnu.org/licenses/gpl-2.0.html.
+#
+# Copyright (C) IBM Corporation, 2013
+#
+# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+ncpus=`grep '^processor' /proc/cpuinfo | wc -l`
+idlecpus=`mpstat | tail -1 | \
+ awk -v ncpus=$ncpus '{ print ncpus * ($7 + $NF) / 100 }'`
+awk -v ncpus=$ncpus -v idlecpus=$idlecpus < /dev/null '
+BEGIN {
+ cpus2use = idlecpus;
+ if (cpus2use < 1)
+ cpus2use = 1;
+ if (cpus2use < ncpus / 10)
+ cpus2use = ncpus / 10;
+ if (cpus2use == int(cpus2use))
+ cpus2use = int(cpus2use)
+ else
+ cpus2use = int(cpus2use) + 1
+ print cpus2use;
+}'
+
diff --git a/kernel/tools/testing/selftests/rcutorture/bin/functions.sh b/kernel/tools/testing/selftests/rcutorture/bin/functions.sh
new file mode 100644
index 000000000..b325470c0
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/bin/functions.sh
@@ -0,0 +1,243 @@
+#!/bin/bash
+#
+# Shell functions for the rest of the scripts.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, you can access it online at
+# http://www.gnu.org/licenses/gpl-2.0.html.
+#
+# Copyright (C) IBM Corporation, 2013
+#
+# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+# bootparam_hotplug_cpu bootparam-string
+#
+# Returns 1 if the specified boot-parameter string tells rcutorture to
+# test CPU-hotplug operations.
+bootparam_hotplug_cpu () {
+ echo "$1" | grep -q "rcutorture\.onoff_"
+}
+
+# checkarg --argname argtype $# arg mustmatch cannotmatch
+#
+# Checks the specified argument "arg" against the mustmatch and cannotmatch
+# patterns.
+checkarg () {
+ if test $3 -le 1
+ then
+ echo $1 needs argument $2 matching \"$5\"
+ usage
+ fi
+ if echo "$4" | grep -q -e "$5"
+ then
+ :
+ else
+ echo $1 $2 \"$4\" must match \"$5\"
+ usage
+ fi
+ if echo "$4" | grep -q -e "$6"
+ then
+ echo $1 $2 \"$4\" must not match \"$6\"
+ usage
+ fi
+}
+
+# configfrag_boot_params bootparam-string config-fragment-file
+#
+# Adds boot parameters from the .boot file, if any.
+configfrag_boot_params () {
+ if test -r "$2.boot"
+ then
+ echo $1 `grep -v '^#' "$2.boot" | tr '\012' ' '`
+ else
+ echo $1
+ fi
+}
+
+# configfrag_boot_cpus bootparam-string config-fragment-file config-cpus
+#
+# Decreases number of CPUs based on any maxcpus= boot parameters specified.
+configfrag_boot_cpus () {
+ local bootargs="`configfrag_boot_params "$1" "$2"`"
+ local maxcpus
+ if echo "${bootargs}" | grep -q 'maxcpus=[0-9]'
+ then
+ maxcpus="`echo "${bootargs}" | sed -e 's/^.*maxcpus=\([0-9]*\).*$/\1/'`"
+ if test "$3" -gt "$maxcpus"
+ then
+ echo $maxcpus
+ else
+ echo $3
+ fi
+ else
+ echo $3
+ fi
+}
+
+# configfrag_hotplug_cpu config-fragment-file
+#
+# Returns 1 if the config fragment specifies hotplug CPU.
+configfrag_hotplug_cpu () {
+ if test ! -r "$1"
+ then
+ echo Unreadable config fragment "$1" 1>&2
+ exit -1
+ fi
+ grep -q '^CONFIG_HOTPLUG_CPU=y$' "$1"
+}
+
+# identify_boot_image qemu-cmd
+#
+# Returns the relative path to the kernel build image. This will be
+# arch/<arch>/boot/bzImage unless overridden with the TORTURE_BOOT_IMAGE
+# environment variable.
+identify_boot_image () {
+ if test -n "$TORTURE_BOOT_IMAGE"
+ then
+ echo $TORTURE_BOOT_IMAGE
+ else
+ case "$1" in
+ qemu-system-x86_64|qemu-system-i386)
+ echo arch/x86/boot/bzImage
+ ;;
+ qemu-system-ppc64)
+ echo arch/powerpc/boot/bzImage
+ ;;
+ *)
+ echo ""
+ ;;
+ esac
+ fi
+}
+
+# identify_qemu builddir
+#
+# Returns our best guess as to which qemu command is appropriate for
+# the kernel at hand. Override with the TORTURE_QEMU_CMD environment variable.
+identify_qemu () {
+ local u="`file "$1"`"
+ if test -n "$TORTURE_QEMU_CMD"
+ then
+ echo $TORTURE_QEMU_CMD
+ elif echo $u | grep -q x86-64
+ then
+ echo qemu-system-x86_64
+ elif echo $u | grep -q "Intel 80386"
+ then
+ echo qemu-system-i386
+ elif uname -a | grep -q ppc64
+ then
+ echo qemu-system-ppc64
+ else
+ echo Cannot figure out what qemu command to use! 1>&2
+ echo file $1 output: $u
+ # Usually this will be one of /usr/bin/qemu-system-*
+ # Use TORTURE_QEMU_CMD environment variable or appropriate
+ # argument to top-level script.
+ exit 1
+ fi
+}
+
+# identify_qemu_append qemu-cmd
+#
+# Output arguments for the qemu "-append" string based on CPU type
+# and the TORTURE_QEMU_INTERACTIVE environment variable.
+identify_qemu_append () {
+ case "$1" in
+ qemu-system-x86_64|qemu-system-i386)
+ echo noapic selinux=0 initcall_debug debug
+ ;;
+ esac
+ if test -n "$TORTURE_QEMU_INTERACTIVE"
+ then
+ echo root=/dev/sda
+ else
+ echo console=ttyS0
+ fi
+}
+
+# identify_qemu_args qemu-cmd serial-file
+#
+# Output arguments for qemu arguments based on the TORTURE_QEMU_MAC
+# and TORTURE_QEMU_INTERACTIVE environment variables.
+identify_qemu_args () {
+ case "$1" in
+ qemu-system-x86_64|qemu-system-i386)
+ ;;
+ qemu-system-ppc64)
+ echo -enable-kvm -M pseries -cpu POWER7 -nodefaults
+ echo -device spapr-vscsi
+ if test -n "$TORTURE_QEMU_INTERACTIVE" -a -n "$TORTURE_QEMU_MAC"
+ then
+ echo -device spapr-vlan,netdev=net0,mac=$TORTURE_QEMU_MAC
+ echo -netdev bridge,br=br0,id=net0
+ elif test -n "$TORTURE_QEMU_INTERACTIVE"
+ then
+ echo -net nic -net user
+ fi
+ ;;
+ esac
+ if test -n "$TORTURE_QEMU_INTERACTIVE"
+ then
+ echo -monitor stdio -serial pty -S
+ else
+ echo -serial file:$2
+ fi
+}
+
+# identify_qemu_vcpus
+#
+# Returns the number of virtual CPUs available to the aggregate of the
+# guest OSes.
+identify_qemu_vcpus () {
+ lscpu | grep '^CPU(s):' | sed -e 's/CPU(s)://'
+}
+
+# print_bug
+#
+# Prints "BUG: " in red followed by remaining arguments
+print_bug () {
+ printf '\033[031mBUG: \033[m'
+ echo $*
+}
+
+# print_warning
+#
+# Prints "WARNING: " in yellow followed by remaining arguments
+print_warning () {
+ printf '\033[033mWARNING: \033[m'
+ echo $*
+}
+
+# specify_qemu_cpus qemu-cmd qemu-args #cpus
+#
+# Appends a string containing "-smp XXX" to qemu-args, unless the incoming
+# qemu-args already contains "-smp".
+specify_qemu_cpus () {
+ local nt;
+
+ if echo $2 | grep -q -e -smp
+ then
+ echo $2
+ else
+ case "$1" in
+ qemu-system-x86_64|qemu-system-i386)
+ echo $2 -smp $3
+ ;;
+ qemu-system-ppc64)
+ nt="`lscpu | grep '^NUMA node0' | sed -e 's/^[^,]*,\([0-9]*\),.*$/\1/'`"
+ echo $2 -smp cores=`expr \( $3 + $nt - 1 \) / $nt`,threads=$nt
+ ;;
+ esac
+ fi
+}
diff --git a/kernel/tools/testing/selftests/rcutorture/bin/kvm-build.sh b/kernel/tools/testing/selftests/rcutorture/bin/kvm-build.sh
new file mode 100755
index 000000000..00cb0db26
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/bin/kvm-build.sh
@@ -0,0 +1,71 @@
+#!/bin/bash
+#
+# Build a kvm-ready Linux kernel from the tree in the current directory.
+#
+# Usage: kvm-build.sh config-template build-dir more-configs
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, you can access it online at
+# http://www.gnu.org/licenses/gpl-2.0.html.
+#
+# Copyright (C) IBM Corporation, 2011
+#
+# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+config_template=${1}
+if test -z "$config_template" -o ! -f "$config_template" -o ! -r "$config_template"
+then
+ echo "kvm-build.sh :$config_template: Not a readable file"
+ exit 1
+fi
+builddir=${2}
+if test -z "$builddir" -o ! -d "$builddir" -o ! -w "$builddir"
+then
+ echo "kvm-build.sh :$builddir: Not a writable directory, cannot build into it"
+ exit 1
+fi
+moreconfigs=${3}
+if test -z "$moreconfigs" -o ! -r "$moreconfigs"
+then
+ echo "kvm-build.sh :$moreconfigs: Not a readable file"
+ exit 1
+fi
+
+T=/tmp/test-linux.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+grep -v 'CONFIG_[A-Z]*_TORTURE_TEST' < ${config_template} > $T/config
+cat << ___EOF___ >> $T/config
+CONFIG_INITRAMFS_SOURCE="$TORTURE_INITRD"
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_CONSOLE=y
+___EOF___
+cat $moreconfigs >> $T/config
+
+configinit.sh $T/config O=$builddir
+retval=$?
+if test $retval -gt 1
+then
+ exit 2
+fi
+ncpus=`cpus2use.sh`
+make O=$builddir -j$ncpus $TORTURE_KMAKE_ARG > $builddir/Make.out 2>&1
+retval=$?
+if test $retval -ne 0 || grep "rcu[^/]*": < $builddir/Make.out | egrep -q "Stop|Error|error:|warning:" || egrep -q "Stop|Error|error:" < $builddir/Make.out
+then
+ echo Kernel build error
+ egrep "Stop|Error|error:|warning:" < $builddir/Make.out
+ echo Run aborted.
+ exit 3
+fi
diff --git a/kernel/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh b/kernel/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh
new file mode 100755
index 000000000..43f764098
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/bin/kvm-recheck-lock.sh
@@ -0,0 +1,51 @@
+#!/bin/bash
+#
+# Analyze a given results directory for locktorture progress.
+#
+# Usage: kvm-recheck-lock.sh resdir
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, you can access it online at
+# http://www.gnu.org/licenses/gpl-2.0.html.
+#
+# Copyright (C) IBM Corporation, 2014
+#
+# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+i="$1"
+if test -d $i
+then
+ :
+else
+ echo Unreadable results directory: $i
+ exit 1
+fi
+
+configfile=`echo $i | sed -e 's/^.*\///'`
+ncs=`grep "Writes: Total:" $i/console.log 2> /dev/null | tail -1 | sed -e 's/^.* Total: //' -e 's/ .*$//'`
+if test -z "$ncs"
+then
+ echo "$configfile -------"
+else
+ title="$configfile ------- $ncs acquisitions/releases"
+ dur=`sed -e 's/^.* locktorture.shutdown_secs=//' -e 's/ .*$//' < $i/qemu-cmd 2> /dev/null`
+ if test -z "$dur"
+ then
+ :
+ else
+ ncsps=`awk -v ncs=$ncs -v dur=$dur '
+ BEGIN { print ncs / dur }' < /dev/null`
+ title="$title ($ncsps per second)"
+ fi
+ echo $title
+fi
diff --git a/kernel/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh b/kernel/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh
new file mode 100755
index 000000000..559e01ac8
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh
@@ -0,0 +1,69 @@
+#!/bin/bash
+#
+# Analyze a given results directory for rcutorture progress.
+#
+# Usage: kvm-recheck-rcu.sh resdir
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, you can access it online at
+# http://www.gnu.org/licenses/gpl-2.0.html.
+#
+# Copyright (C) IBM Corporation, 2014
+#
+# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+i="$1"
+if test -d $i
+then
+ :
+else
+ echo Unreadable results directory: $i
+ exit 1
+fi
+. tools/testing/selftests/rcutorture/bin/functions.sh
+
+configfile=`echo $i | sed -e 's/^.*\///'`
+ngps=`grep ver: $i/console.log 2> /dev/null | tail -1 | sed -e 's/^.* ver: //' -e 's/ .*$//'`
+if test -z "$ngps"
+then
+ echo "$configfile -------"
+else
+ title="$configfile ------- $ngps grace periods"
+ dur=`sed -e 's/^.* rcutorture.shutdown_secs=//' -e 's/ .*$//' < $i/qemu-cmd 2> /dev/null`
+ if test -z "$dur"
+ then
+ :
+ else
+ ngpsps=`awk -v ngps=$ngps -v dur=$dur '
+ BEGIN { print ngps / dur }' < /dev/null`
+ title="$title ($ngpsps per second)"
+ fi
+ echo $title
+ nclosecalls=`grep --binary-files=text 'torture: Reader Batch' $i/console.log | tail -1 | awk '{for (i=NF-8;i<=NF;i++) sum+=$i; } END {print sum}'`
+ if test -z "$nclosecalls"
+ then
+ exit 0
+ fi
+ if test "$nclosecalls" -eq 0
+ then
+ exit 0
+ fi
+ # Compute number of close calls per tenth of an hour
+ nclosecalls10=`awk -v nclosecalls=$nclosecalls -v dur=$dur 'BEGIN { print int(nclosecalls * 36000 / dur) }' < /dev/null`
+ if test $nclosecalls10 -gt 5 -a $nclosecalls -gt 1
+ then
+ print_bug $nclosecalls "Reader Batch close calls in" $(($dur/60)) minute run: $i
+ else
+ print_warning $nclosecalls "Reader Batch close calls in" $(($dur/60)) minute run: $i
+ fi
+fi
diff --git a/kernel/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh b/kernel/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh
new file mode 100755
index 000000000..4f5b20f36
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh
@@ -0,0 +1,69 @@
+#!/bin/bash
+#
+# Given the results directories for previous KVM-based torture runs,
+# check the build and console output for errors. Given a directory
+# containing results directories, this recursively checks them all.
+#
+# Usage: kvm-recheck.sh resdir ...
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, you can access it online at
+# http://www.gnu.org/licenses/gpl-2.0.html.
+#
+# Copyright (C) IBM Corporation, 2011
+#
+# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+PATH=`pwd`/tools/testing/selftests/rcutorture/bin:$PATH; export PATH
+. tools/testing/selftests/rcutorture/bin/functions.sh
+for rd in "$@"
+do
+ firsttime=1
+ dirs=`find $rd -name Make.defconfig.out -print | sort | sed -e 's,/[^/]*$,,' | sort -u`
+ for i in $dirs
+ do
+ if test -n "$firsttime"
+ then
+ firsttime=""
+ resdir=`echo $i | sed -e 's,/$,,' -e 's,/[^/]*$,,'`
+ head -1 $resdir/log
+ fi
+ TORTURE_SUITE="`cat $i/../TORTURE_SUITE`"
+ kvm-recheck-${TORTURE_SUITE}.sh $i
+ if test -f "$i/console.log"
+ then
+ configcheck.sh $i/.config $i/ConfigFragment
+ parse-build.sh $i/Make.out $configfile
+ parse-torture.sh $i/console.log $configfile
+ parse-console.sh $i/console.log $configfile
+ if test -r $i/Warnings
+ then
+ cat $i/Warnings
+ fi
+ else
+ if test -f "$i/qemu-cmd"
+ then
+ print_bug qemu failed
+ echo " $i"
+ elif test -f "$i/buildonly"
+ then
+ echo Build-only run, no boot/test
+ configcheck.sh $i/.config $i/ConfigFragment
+ parse-build.sh $i/Make.out $configfile
+ else
+ print_bug Build failed
+ echo " $i"
+ fi
+ fi
+ done
+done
diff --git a/kernel/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh b/kernel/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh
new file mode 100755
index 000000000..5236e0739
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh
@@ -0,0 +1,229 @@
+#!/bin/bash
+#
+# Run a kvm-based test of the specified tree on the specified configs.
+# Fully automated run and error checking, no graphics console.
+#
+# Execute this in the source tree. Do not run it as a background task
+# because qemu does not seem to like that much.
+#
+# Usage: kvm-test-1-run.sh config builddir resdir minutes qemu-args boot_args
+#
+# qemu-args defaults to "-enable-kvm -soundhw pcspk -nographic", along with
+# arguments specifying the number of CPUs and other
+# options generated from the underlying CPU architecture.
+# boot_args defaults to value returned by the per_version_boot_params
+# shell function.
+#
+# Anything you specify for either qemu-args or boot_args is appended to
+# the default values. The "-smp" value is deduced from the contents of
+# the config fragment.
+#
+# More sophisticated argument parsing is clearly needed.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, you can access it online at
+# http://www.gnu.org/licenses/gpl-2.0.html.
+#
+# Copyright (C) IBM Corporation, 2011
+#
+# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+grace=120
+
+T=/tmp/kvm-test-1-run.sh.$$
+trap 'rm -rf $T' 0
+touch $T
+
+. $KVM/bin/functions.sh
+. $CONFIGFRAG/ver_functions.sh
+
+config_template=${1}
+config_dir=`echo $config_template | sed -e 's,/[^/]*$,,'`
+title=`echo $config_template | sed -e 's/^.*\///'`
+builddir=${2}
+if test -z "$builddir" -o ! -d "$builddir" -o ! -w "$builddir"
+then
+ echo "kvm-test-1-run.sh :$builddir: Not a writable directory, cannot build into it"
+ exit 1
+fi
+resdir=${3}
+if test -z "$resdir" -o ! -d "$resdir" -o ! -w "$resdir"
+then
+ echo "kvm-test-1-run.sh :$resdir: Not a writable directory, cannot store results into it"
+ exit 1
+fi
+cp $config_template $resdir/ConfigFragment
+echo ' ---' `date`: Starting build
+echo ' ---' Kconfig fragment at: $config_template >> $resdir/log
+if test -r "$config_dir/CFcommon"
+then
+ cat < $config_dir/CFcommon >> $T
+fi
+# Optimizations below this point
+# CONFIG_USB=n
+# CONFIG_SECURITY=n
+# CONFIG_NFS_FS=n
+# CONFIG_SOUND=n
+# CONFIG_INPUT_JOYSTICK=n
+# CONFIG_INPUT_TABLET=n
+# CONFIG_INPUT_TOUCHSCREEN=n
+# CONFIG_INPUT_MISC=n
+# CONFIG_INPUT_MOUSE=n
+# # CONFIG_NET=n # disables console access, so accept the slower build.
+# CONFIG_SCSI=n
+# CONFIG_ATA=n
+# CONFIG_FAT_FS=n
+# CONFIG_MSDOS_FS=n
+# CONFIG_VFAT_FS=n
+# CONFIG_ISO9660_FS=n
+# CONFIG_QUOTA=n
+# CONFIG_HID=n
+# CONFIG_CRYPTO=n
+# CONFIG_PCCARD=n
+# CONFIG_PCMCIA=n
+# CONFIG_CARDBUS=n
+# CONFIG_YENTA=n
+if kvm-build.sh $config_template $builddir $T
+then
+ QEMU="`identify_qemu $builddir/vmlinux`"
+ BOOT_IMAGE="`identify_boot_image $QEMU`"
+ cp $builddir/Make*.out $resdir
+ cp $builddir/.config $resdir
+ if test -n "$BOOT_IMAGE"
+ then
+ cp $builddir/$BOOT_IMAGE $resdir
+ else
+ echo No identifiable boot image, not running KVM, see $resdir.
+ echo Do the torture scripts know about your architecture?
+ fi
+ parse-build.sh $resdir/Make.out $title
+ if test -f $builddir.wait
+ then
+ mv $builddir.wait $builddir.ready
+ fi
+else
+ cp $builddir/Make*.out $resdir
+ cp $builddir/.config $resdir || :
+ echo Build failed, not running KVM, see $resdir.
+ if test -f $builddir.wait
+ then
+ mv $builddir.wait $builddir.ready
+ fi
+ exit 1
+fi
+while test -f $builddir.ready
+do
+ sleep 1
+done
+minutes=$4
+seconds=$(($minutes * 60))
+qemu_args=$5
+boot_args=$6
+
+cd $KVM
+kstarttime=`awk 'BEGIN { print systime() }' < /dev/null`
+if test -z "$TORTURE_BUILDONLY"
+then
+ echo ' ---' `date`: Starting kernel
+fi
+
+# Generate -smp qemu argument.
+qemu_args="-enable-kvm -soundhw pcspk -nographic $qemu_args"
+cpu_count=`configNR_CPUS.sh $config_template`
+cpu_count=`configfrag_boot_cpus "$boot_args" "$config_template" "$cpu_count"`
+vcpus=`identify_qemu_vcpus`
+if test $cpu_count -gt $vcpus
+then
+ echo CPU count limited from $cpu_count to $vcpus
+ touch $resdir/Warnings
+ echo CPU count limited from $cpu_count to $vcpus >> $resdir/Warnings
+ cpu_count=$vcpus
+fi
+qemu_args="`specify_qemu_cpus "$QEMU" "$qemu_args" "$cpu_count"`"
+
+# Generate architecture-specific and interaction-specific qemu arguments
+qemu_args="$qemu_args `identify_qemu_args "$QEMU" "$builddir/console.log"`"
+
+# Generate qemu -append arguments
+qemu_append="`identify_qemu_append "$QEMU"`"
+
+# Pull in Kconfig-fragment boot parameters
+boot_args="`configfrag_boot_params "$boot_args" "$config_template"`"
+# Generate kernel-version-specific boot parameters
+boot_args="`per_version_boot_params "$boot_args" $builddir/.config $seconds`"
+
+if test -n "$TORTURE_BUILDONLY"
+then
+ echo Build-only run specified, boot/test omitted.
+ touch $resdir/buildonly
+ exit 0
+fi
+echo "NOTE: $QEMU either did not run or was interactive" > $builddir/console.log
+echo $QEMU $qemu_args -m 512 -kernel $resdir/bzImage -append \"$qemu_append $boot_args\" > $resdir/qemu-cmd
+( $QEMU $qemu_args -m 512 -kernel $resdir/bzImage -append "$qemu_append $boot_args"; echo $? > $resdir/qemu-retval ) &
+qemu_pid=$!
+commandcompleted=0
+echo Monitoring qemu job at pid $qemu_pid
+while :
+do
+ kruntime=`awk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null`
+ if kill -0 $qemu_pid > /dev/null 2>&1
+ then
+ if test $kruntime -ge $seconds
+ then
+ break;
+ fi
+ sleep 1
+ else
+ commandcompleted=1
+ if test $kruntime -lt $seconds
+ then
+ echo Completed in $kruntime vs. $seconds >> $resdir/Warnings 2>&1
+ grep "^(qemu) qemu:" $resdir/kvm-test-1-run.sh.out >> $resdir/Warnings 2>&1
+ killpid="`sed -n "s/^(qemu) qemu: terminating on signal [0-9]* from pid \([0-9]*\).*$/\1/p" $resdir/Warnings`"
+ if test -n "$killpid"
+ then
+ echo "ps -fp $killpid" >> $resdir/Warnings 2>&1
+ ps -fp $killpid >> $resdir/Warnings 2>&1
+ fi
+ else
+ echo ' ---' `date`: Kernel done
+ fi
+ break
+ fi
+done
+if test $commandcompleted -eq 0
+then
+ echo Grace period for qemu job at pid $qemu_pid
+ while :
+ do
+ kruntime=`awk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null`
+ if kill -0 $qemu_pid > /dev/null 2>&1
+ then
+ :
+ else
+ break
+ fi
+ if test $kruntime -ge $((seconds + grace))
+ then
+ echo "!!! PID $qemu_pid hung at $kruntime vs. $seconds seconds" >> $resdir/Warnings 2>&1
+ kill -KILL $qemu_pid
+ break
+ fi
+ sleep 1
+ done
+fi
+
+cp $builddir/console.log $resdir
+parse-torture.sh $resdir/console.log $title
+parse-console.sh $resdir/console.log $title
diff --git a/kernel/tools/testing/selftests/rcutorture/bin/kvm.sh b/kernel/tools/testing/selftests/rcutorture/bin/kvm.sh
new file mode 100755
index 000000000..dd2812ceb
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/bin/kvm.sh
@@ -0,0 +1,406 @@
+#!/bin/bash
+#
+# Run a series of 14 tests under KVM. These are not particularly
+# well-selected or well-tuned, but are the current set. Run from the
+# top level of the source tree.
+#
+# Edit the definitions below to set the locations of the various directories,
+# as well as the test duration.
+#
+# Usage: kvm.sh [ options ]
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, you can access it online at
+# http://www.gnu.org/licenses/gpl-2.0.html.
+#
+# Copyright (C) IBM Corporation, 2011
+#
+# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+scriptname=$0
+args="$*"
+
+T=/tmp/kvm.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+dur=30
+dryrun=""
+KVM="`pwd`/tools/testing/selftests/rcutorture"; export KVM
+PATH=${KVM}/bin:$PATH; export PATH
+TORTURE_DEFCONFIG=defconfig
+TORTURE_BOOT_IMAGE=""
+TORTURE_INITRD="$KVM/initrd"; export TORTURE_INITRD
+TORTURE_KMAKE_ARG=""
+TORTURE_SUITE=rcu
+resdir=""
+configs=""
+cpus=0
+ds=`date +%Y.%m.%d-%H:%M:%S`
+
+. functions.sh
+
+usage () {
+ echo "Usage: $scriptname optional arguments:"
+ echo " --bootargs kernel-boot-arguments"
+ echo " --bootimage relative-path-to-kernel-boot-image"
+ echo " --buildonly"
+ echo " --configs \"config-file list\""
+ echo " --cpus N"
+ echo " --datestamp string"
+ echo " --defconfig string"
+ echo " --dryrun sched|script"
+ echo " --duration minutes"
+ echo " --interactive"
+ echo " --kmake-arg kernel-make-arguments"
+ echo " --mac nn:nn:nn:nn:nn:nn"
+ echo " --no-initrd"
+ echo " --qemu-args qemu-system-..."
+ echo " --qemu-cmd qemu-system-..."
+ echo " --results absolute-pathname"
+ echo " --torture rcu"
+ exit 1
+}
+
+while test $# -gt 0
+do
+ case "$1" in
+ --bootargs)
+ checkarg --bootargs "(list of kernel boot arguments)" "$#" "$2" '.*' '^--'
+ TORTURE_BOOTARGS="$2"
+ shift
+ ;;
+ --bootimage)
+ checkarg --bootimage "(relative path to kernel boot image)" "$#" "$2" '[a-zA-Z0-9][a-zA-Z0-9_]*' '^--'
+ TORTURE_BOOT_IMAGE="$2"
+ shift
+ ;;
+ --buildonly)
+ TORTURE_BUILDONLY=1
+ ;;
+ --configs)
+ checkarg --configs "(list of config files)" "$#" "$2" '^[^/]*$' '^--'
+ configs="$2"
+ shift
+ ;;
+ --cpus)
+ checkarg --cpus "(number)" "$#" "$2" '^[0-9]*$' '^--'
+ cpus=$2
+ shift
+ ;;
+ --datestamp)
+ checkarg --datestamp "(relative pathname)" "$#" "$2" '^[^/]*$' '^--'
+ ds=$2
+ shift
+ ;;
+ --defconfig)
+ checkarg --defconfig "defconfigtype" "$#" "$2" '^[^/][^/]*$' '^--'
+ TORTURE_DEFCONFIG=$2
+ shift
+ ;;
+ --dryrun)
+ checkarg --dryrun "sched|script" $# "$2" 'sched\|script' '^--'
+ dryrun=$2
+ shift
+ ;;
+ --duration)
+ checkarg --duration "(minutes)" $# "$2" '^[0-9]*$' '^error'
+ dur=$2
+ shift
+ ;;
+ --interactive)
+ TORTURE_QEMU_INTERACTIVE=1; export TORTURE_QEMU_INTERACTIVE
+ ;;
+ --kmake-arg)
+ checkarg --kmake-arg "(kernel make arguments)" $# "$2" '.*' '^error$'
+ TORTURE_KMAKE_ARG="$2"
+ shift
+ ;;
+ --mac)
+ checkarg --mac "(MAC address)" $# "$2" '^\([0-9a-fA-F]\{2\}:\)\{5\}[0-9a-fA-F]\{2\}$' error
+ TORTURE_QEMU_MAC=$2
+ shift
+ ;;
+ --no-initrd)
+ TORTURE_INITRD=""; export TORTURE_INITRD
+ ;;
+ --qemu-args)
+ checkarg --qemu-args "-qemu args" $# "$2" '^-' '^error'
+ TORTURE_QEMU_ARG="$2"
+ shift
+ ;;
+ --qemu-cmd)
+ checkarg --qemu-cmd "(qemu-system-...)" $# "$2" 'qemu-system-' '^--'
+ TORTURE_QEMU_CMD="$2"
+ shift
+ ;;
+ --results)
+ checkarg --results "(absolute pathname)" "$#" "$2" '^/' '^error'
+ resdir=$2
+ shift
+ ;;
+ --torture)
+ checkarg --torture "(suite name)" "$#" "$2" '^\(lock\|rcu\)$' '^--'
+ TORTURE_SUITE=$2
+ shift
+ ;;
+ *)
+ echo Unknown argument $1
+ usage
+ ;;
+ esac
+ shift
+done
+
+CONFIGFRAG=${KVM}/configs/${TORTURE_SUITE}; export CONFIGFRAG
+
+if test -z "$configs"
+then
+ configs="`cat $CONFIGFRAG/CFLIST`"
+fi
+
+if test -z "$resdir"
+then
+ resdir=$KVM/res
+fi
+
+# Create a file of test-name/#cpus pairs, sorted by decreasing #cpus.
+touch $T/cfgcpu
+for CF in $configs
+do
+ if test -f "$CONFIGFRAG/$CF"
+ then
+ cpu_count=`configNR_CPUS.sh $CONFIGFRAG/$CF`
+ cpu_count=`configfrag_boot_cpus "$TORTURE_BOOTARGS" "$CONFIGFRAG/$CF" "$cpu_count"`
+ echo $CF $cpu_count >> $T/cfgcpu
+ else
+ echo "The --configs file $CF does not exist, terminating."
+ exit 1
+ fi
+done
+sort -k2nr $T/cfgcpu > $T/cfgcpu.sort
+
+# Use a greedy bin-packing algorithm, sorting the list accordingly.
+awk < $T/cfgcpu.sort > $T/cfgcpu.pack -v ncpus=$cpus '
+BEGIN {
+ njobs = 0;
+}
+
+{
+ # Read file of tests and corresponding required numbers of CPUs.
+ cf[njobs] = $1;
+ cpus[njobs] = $2;
+ njobs++;
+}
+
+END {
+ alldone = 0;
+ batch = 0;
+ nc = -1;
+
+ # Each pass through the following loop creates on test batch
+ # that can be executed concurrently given ncpus. Note that a
+ # given test that requires more than the available CPUs will run in
+ # their own batch. Such tests just have to make do with what
+ # is available.
+ while (nc != ncpus) {
+ batch++;
+ nc = ncpus;
+
+ # Each pass through the following loop considers one
+ # test for inclusion in the current batch.
+ for (i = 0; i < njobs; i++) {
+ if (done[i])
+ continue; # Already part of a batch.
+ if (nc >= cpus[i] || nc == ncpus) {
+
+ # This test fits into the current batch.
+ done[i] = batch;
+ nc -= cpus[i];
+ if (nc <= 0)
+ break; # Too-big test in its own batch.
+ }
+ }
+ }
+
+ # Dump out the tests in batch order.
+ for (b = 1; b <= batch; b++)
+ for (i = 0; i < njobs; i++)
+ if (done[i] == b)
+ print cf[i], cpus[i];
+}'
+
+# Generate a script to execute the tests in appropriate batches.
+cat << ___EOF___ > $T/script
+CONFIGFRAG="$CONFIGFRAG"; export CONFIGFRAG
+KVM="$KVM"; export KVM
+PATH="$PATH"; export PATH
+TORTURE_BOOT_IMAGE="$TORTURE_BOOT_IMAGE"; export TORTURE_BOOT_IMAGE
+TORTURE_BUILDONLY="$TORTURE_BUILDONLY"; export TORTURE_BUILDONLY
+TORTURE_DEFCONFIG="$TORTURE_DEFCONFIG"; export TORTURE_DEFCONFIG
+TORTURE_INITRD="$TORTURE_INITRD"; export TORTURE_INITRD
+TORTURE_KMAKE_ARG="$TORTURE_KMAKE_ARG"; export TORTURE_KMAKE_ARG
+TORTURE_QEMU_CMD="$TORTURE_QEMU_CMD"; export TORTURE_QEMU_CMD
+TORTURE_QEMU_INTERACTIVE="$TORTURE_QEMU_INTERACTIVE"; export TORTURE_QEMU_INTERACTIVE
+TORTURE_QEMU_MAC="$TORTURE_QEMU_MAC"; export TORTURE_QEMU_MAC
+TORTURE_SUITE="$TORTURE_SUITE"; export TORTURE_SUITE
+if ! test -e $resdir
+then
+ mkdir -p "$resdir" || :
+fi
+mkdir $resdir/$ds
+echo Results directory: $resdir/$ds
+echo $scriptname $args
+touch $resdir/$ds/log
+echo $scriptname $args >> $resdir/$ds/log
+echo ${TORTURE_SUITE} > $resdir/$ds/TORTURE_SUITE
+pwd > $resdir/$ds/testid.txt
+if test -d .git
+then
+ git status >> $resdir/$ds/testid.txt
+ git rev-parse HEAD >> $resdir/$ds/testid.txt
+ if ! git diff HEAD > $T/git-diff 2>&1
+ then
+ cp $T/git-diff $resdir/$ds
+ fi
+fi
+___EOF___
+awk < $T/cfgcpu.pack \
+ -v CONFIGDIR="$CONFIGFRAG/" \
+ -v KVM="$KVM" \
+ -v ncpus=$cpus \
+ -v rd=$resdir/$ds/ \
+ -v dur=$dur \
+ -v TORTURE_QEMU_ARG="$TORTURE_QEMU_ARG" \
+ -v TORTURE_BOOTARGS="$TORTURE_BOOTARGS" \
+'BEGIN {
+ i = 0;
+}
+
+{
+ cf[i] = $1;
+ cpus[i] = $2;
+ i++;
+}
+
+# Dump out the scripting required to run one test batch.
+function dump(first, pastlast)
+{
+ print "echo ----Start batch: `date`";
+ print "echo ----Start batch: `date` >> " rd "/log";
+ jn=1
+ for (j = first; j < pastlast; j++) {
+ builddir=KVM "/b" jn
+ cpusr[jn] = cpus[j];
+ if (cfrep[cf[j]] == "") {
+ cfr[jn] = cf[j];
+ cfrep[cf[j]] = 1;
+ } else {
+ cfrep[cf[j]]++;
+ cfr[jn] = cf[j] "." cfrep[cf[j]];
+ }
+ if (cpusr[jn] > ncpus && ncpus != 0)
+ ovf = "-ovf";
+ else
+ ovf = "";
+ print "echo ", cfr[jn], cpusr[jn] ovf ": Starting build. `date`";
+ print "echo ", cfr[jn], cpusr[jn] ovf ": Starting build. `date` >> " rd "/log";
+ print "rm -f " builddir ".*";
+ print "touch " builddir ".wait";
+ print "mkdir " builddir " > /dev/null 2>&1 || :";
+ print "mkdir " rd cfr[jn] " || :";
+ print "kvm-test-1-run.sh " CONFIGDIR cf[j], builddir, rd cfr[jn], dur " \"" TORTURE_QEMU_ARG "\" \"" TORTURE_BOOTARGS "\" > " rd cfr[jn] "/kvm-test-1-run.sh.out 2>&1 &"
+ print "echo ", cfr[jn], cpusr[jn] ovf ": Waiting for build to complete. `date`";
+ print "echo ", cfr[jn], cpusr[jn] ovf ": Waiting for build to complete. `date` >> " rd "/log";
+ print "while test -f " builddir ".wait"
+ print "do"
+ print "\tsleep 1"
+ print "done"
+ print "echo ", cfr[jn], cpusr[jn] ovf ": Build complete. `date`";
+ print "echo ", cfr[jn], cpusr[jn] ovf ": Build complete. `date` >> " rd "/log";
+ jn++;
+ }
+ for (j = 1; j < jn; j++) {
+ builddir=KVM "/b" j
+ print "rm -f " builddir ".ready"
+ print "if test -z \"$TORTURE_BUILDONLY\""
+ print "then"
+ print "\techo ----", cfr[j], cpusr[j] ovf ": Starting kernel. `date`";
+ print "\techo ----", cfr[j], cpusr[j] ovf ": Starting kernel. `date` >> " rd "/log";
+ print "fi"
+ }
+ print "wait"
+ print "if test -z \"$TORTURE_BUILDONLY\""
+ print "then"
+ print "\techo ---- All kernel runs complete. `date`";
+ print "\techo ---- All kernel runs complete. `date` >> " rd "/log";
+ print "fi"
+ for (j = 1; j < jn; j++) {
+ builddir=KVM "/b" j
+ print "echo ----", cfr[j], cpusr[j] ovf ": Build/run results:";
+ print "echo ----", cfr[j], cpusr[j] ovf ": Build/run results: >> " rd "/log";
+ print "cat " rd cfr[j] "/kvm-test-1-run.sh.out";
+ print "cat " rd cfr[j] "/kvm-test-1-run.sh.out >> " rd "/log";
+ }
+}
+
+END {
+ njobs = i;
+ nc = ncpus;
+ first = 0;
+
+ # Each pass through the following loop considers one test.
+ for (i = 0; i < njobs; i++) {
+ if (ncpus == 0) {
+ # Sequential test specified, each test its own batch.
+ dump(i, i + 1);
+ first = i;
+ } else if (nc < cpus[i] && i != 0) {
+ # Out of CPUs, dump out a batch.
+ dump(first, i);
+ first = i;
+ nc = ncpus;
+ }
+ # Account for the CPUs needed by the current test.
+ nc -= cpus[i];
+ }
+ # Dump the last batch.
+ if (ncpus != 0)
+ dump(first, i);
+}' >> $T/script
+
+cat << ___EOF___ >> $T/script
+echo
+echo
+echo " --- `date` Test summary:"
+echo Results directory: $resdir/$ds
+kvm-recheck.sh $resdir/$ds
+___EOF___
+
+if test "$dryrun" = script
+then
+ cat $T/script
+ exit 0
+elif test "$dryrun" = sched
+then
+ # Extract the test run schedule from the script.
+ egrep 'Start batch|Starting build\.' $T/script |
+ grep -v ">>" |
+ sed -e 's/:.*$//' -e 's/^echo //'
+ exit 0
+else
+ # Not a dryrun, so run the script.
+ sh $T/script
+fi
+
+# Tracing: trace_event=rcu:rcu_grace_period,rcu:rcu_future_grace_period,rcu:rcu_grace_period_init,rcu:rcu_nocb_wake,rcu:rcu_preempt_task,rcu:rcu_unlock_preempted_task,rcu:rcu_quiescent_state_report,rcu:rcu_fqs,rcu:rcu_callback,rcu:rcu_kfree_callback,rcu:rcu_batch_start,rcu:rcu_invoke_callback,rcu:rcu_invoke_kfree_callback,rcu:rcu_batch_end,rcu:rcu_torture_read,rcu:rcu_barrier
diff --git a/kernel/tools/testing/selftests/rcutorture/bin/parse-build.sh b/kernel/tools/testing/selftests/rcutorture/bin/parse-build.sh
new file mode 100755
index 000000000..a6b57622c
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/bin/parse-build.sh
@@ -0,0 +1,62 @@
+#!/bin/bash
+#
+# Check the build output from an rcutorture run for goodness.
+# The "file" is a pathname on the local system, and "title" is
+# a text string for error-message purposes.
+#
+# The file must contain kernel build output.
+#
+# Usage: parse-build.sh file title
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, you can access it online at
+# http://www.gnu.org/licenses/gpl-2.0.html.
+#
+# Copyright (C) IBM Corporation, 2011
+#
+# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+F=$1
+title=$2
+T=/tmp/parse-build.sh.$$
+trap 'rm -rf $T' 0
+mkdir $T
+
+. functions.sh
+
+if grep -q CC < $F
+then
+ :
+else
+ print_bug $title no build
+ exit 1
+fi
+
+if grep -q "error:" < $F
+then
+ print_bug $title build errors:
+ grep "error:" < $F
+ exit 2
+fi
+
+grep warning: < $F > $T/warnings
+grep "include/linux/*rcu*\.h:" $T/warnings > $T/hwarnings
+grep "kernel/rcu/[^/]*:" $T/warnings > $T/cwarnings
+cat $T/hwarnings $T/cwarnings > $T/rcuwarnings
+if test -s $T/rcuwarnings
+then
+ print_warning $title build errors:
+ cat $T/rcuwarnings
+ exit 2
+fi
+exit 0
diff --git a/kernel/tools/testing/selftests/rcutorture/bin/parse-console.sh b/kernel/tools/testing/selftests/rcutorture/bin/parse-console.sh
new file mode 100755
index 000000000..d8f35cf11
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/bin/parse-console.sh
@@ -0,0 +1,44 @@
+#!/bin/bash
+#
+# Check the console output from an rcutorture run for oopses.
+# The "file" is a pathname on the local system, and "title" is
+# a text string for error-message purposes.
+#
+# Usage: parse-console.sh file title
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, you can access it online at
+# http://www.gnu.org/licenses/gpl-2.0.html.
+#
+# Copyright (C) IBM Corporation, 2011
+#
+# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+T=/tmp/abat-chk-badness.sh.$$
+trap 'rm -f $T' 0
+
+file="$1"
+title="$2"
+
+. functions.sh
+
+if grep -Pq '\x00' < $file
+then
+ print_warning Console output contains nul bytes, old qemu still running?
+fi
+egrep 'Badness|WARNING:|Warn|BUG|===========|Call Trace:|Oops:|Stall ended before state dump start' < $file | grep -v 'ODEBUG: ' | grep -v 'Warning: unable to open an initial console' > $T
+if test -s $T
+then
+ print_warning Assertion failure in $file $title
+ cat $T
+fi
diff --git a/kernel/tools/testing/selftests/rcutorture/bin/parse-torture.sh b/kernel/tools/testing/selftests/rcutorture/bin/parse-torture.sh
new file mode 100755
index 000000000..e3c5f0705
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/bin/parse-torture.sh
@@ -0,0 +1,105 @@
+#!/bin/bash
+#
+# Check the console output from a torture run for goodness.
+# The "file" is a pathname on the local system, and "title" is
+# a text string for error-message purposes.
+#
+# The file must contain torture output, but can be interspersed
+# with other dmesg text, as in console-log output.
+#
+# Usage: parse-torture.sh file title
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, you can access it online at
+# http://www.gnu.org/licenses/gpl-2.0.html.
+#
+# Copyright (C) IBM Corporation, 2011
+#
+# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+T=/tmp/parse-torture.sh.$$
+file="$1"
+title="$2"
+
+trap 'rm -f $T.seq' 0
+
+. functions.sh
+
+# check for presence of torture output file.
+
+if test -f "$file" -a -r "$file"
+then
+ :
+else
+ echo $title unreadable torture output file: $file
+ exit 1
+fi
+
+# check for abject failure
+
+if grep -q FAILURE $file || grep -q -e '-torture.*!!!' $file
+then
+ nerrs=`grep --binary-files=text '!!!' $file | tail -1 | awk '{for (i=NF-8;i<=NF;i++) sum+=$i; } END {print sum}'`
+ print_bug $title FAILURE, $nerrs instances
+ echo " " $url
+ exit
+fi
+
+grep --binary-files=text 'torture:.*ver:' $file | grep --binary-files=text -v '(null)' | sed -e 's/^(initramfs)[^]]*] //' -e 's/^\[[^]]*] //' |
+awk '
+BEGIN {
+ ver = 0;
+ badseq = 0;
+ }
+
+ {
+ if (!badseq && ($5 + 0 != $5 || $5 <= ver)) {
+ badseqno1 = ver;
+ badseqno2 = $5;
+ badseqnr = NR;
+ badseq = 1;
+ }
+ ver = $5
+ }
+
+END {
+ if (badseq) {
+ if (badseqno1 == badseqno2 && badseqno2 == ver)
+ print "GP HANG at " ver " torture stat " badseqnr;
+ else
+ print "BAD SEQ " badseqno1 ":" badseqno2 " last:" ver " version " badseqnr;
+ }
+ }' > $T.seq
+
+if grep -q SUCCESS $file
+then
+ if test -s $T.seq
+ then
+ print_warning $title $title `cat $T.seq`
+ echo " " $file
+ exit 2
+ fi
+else
+ if grep -q "_HOTPLUG:" $file
+ then
+ print_warning HOTPLUG FAILURES $title `cat $T.seq`
+ echo " " $file
+ exit 3
+ fi
+ echo $title no success message, `grep --binary-files=text 'ver:' $file | wc -l` successful version messages
+ if test -s $T.seq
+ then
+ print_warning $title `cat $T.seq`
+ fi
+ exit 2
+fi
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/lock/BUSTED b/kernel/tools/testing/selftests/rcutorture/configs/lock/BUSTED
new file mode 100644
index 000000000..1d1da1477
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/lock/BUSTED
@@ -0,0 +1,6 @@
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PREEMPT_NONE=n
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=y
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/lock/BUSTED.boot b/kernel/tools/testing/selftests/rcutorture/configs/lock/BUSTED.boot
new file mode 100644
index 000000000..6386c15e9
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/lock/BUSTED.boot
@@ -0,0 +1 @@
+locktorture.torture_type=lock_busted
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/lock/CFLIST b/kernel/tools/testing/selftests/rcutorture/configs/lock/CFLIST
new file mode 100644
index 000000000..6910b7370
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/lock/CFLIST
@@ -0,0 +1,4 @@
+LOCK01
+LOCK02
+LOCK03
+LOCK04 \ No newline at end of file
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/lock/CFcommon b/kernel/tools/testing/selftests/rcutorture/configs/lock/CFcommon
new file mode 100644
index 000000000..e372dc269
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/lock/CFcommon
@@ -0,0 +1,2 @@
+CONFIG_LOCK_TORTURE_TEST=y
+CONFIG_PRINTK_TIME=y
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK01 b/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK01
new file mode 100644
index 000000000..a9625e3d6
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK01
@@ -0,0 +1,6 @@
+CONFIG_SMP=y
+CONFIG_NR_CPUS=8
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PREEMPT_NONE=n
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=y
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK02 b/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK02
new file mode 100644
index 000000000..1d1da1477
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK02
@@ -0,0 +1,6 @@
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PREEMPT_NONE=n
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=y
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK02.boot b/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK02.boot
new file mode 100644
index 000000000..5aa44b4f1
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK02.boot
@@ -0,0 +1 @@
+locktorture.torture_type=mutex_lock
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK03 b/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK03
new file mode 100644
index 000000000..1d1da1477
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK03
@@ -0,0 +1,6 @@
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PREEMPT_NONE=n
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=y
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK03.boot b/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK03.boot
new file mode 100644
index 000000000..a67bbe024
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK03.boot
@@ -0,0 +1 @@
+locktorture.torture_type=rwsem_lock
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK04 b/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK04
new file mode 100644
index 000000000..1d1da1477
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK04
@@ -0,0 +1,6 @@
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PREEMPT_NONE=n
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=y
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK04.boot b/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK04.boot
new file mode 100644
index 000000000..48c04fe47
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/lock/LOCK04.boot
@@ -0,0 +1 @@
+locktorture.torture_type=rw_lock
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/lock/ver_functions.sh b/kernel/tools/testing/selftests/rcutorture/configs/lock/ver_functions.sh
new file mode 100644
index 000000000..252aae618
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/lock/ver_functions.sh
@@ -0,0 +1,43 @@
+#!/bin/bash
+#
+# Kernel-version-dependent shell functions for the rest of the scripts.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, you can access it online at
+# http://www.gnu.org/licenses/gpl-2.0.html.
+#
+# Copyright (C) IBM Corporation, 2014
+#
+# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+# locktorture_param_onoff bootparam-string config-file
+#
+# Adds onoff locktorture module parameters to kernels having it.
+locktorture_param_onoff () {
+ if ! bootparam_hotplug_cpu "$1" && configfrag_hotplug_cpu "$2"
+ then
+ echo CPU-hotplug kernel, adding locktorture onoff. 1>&2
+ echo locktorture.onoff_interval=3 locktorture.onoff_holdoff=30
+ fi
+}
+
+# per_version_boot_params bootparam-string config-file seconds
+#
+# Adds per-version torture-module parameters to kernels supporting them.
+per_version_boot_params () {
+ echo $1 `locktorture_param_onoff "$1" "$2"` \
+ locktorture.stat_interval=15 \
+ locktorture.shutdown_secs=$3 \
+ locktorture.torture_runnable=1 \
+ locktorture.verbose=1
+}
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/BUSTED b/kernel/tools/testing/selftests/rcutorture/configs/rcu/BUSTED
new file mode 100644
index 000000000..48d8a245c
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/BUSTED
@@ -0,0 +1,7 @@
+CONFIG_RCU_TRACE=n
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PREEMPT_NONE=n
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=y
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/BUSTED.boot b/kernel/tools/testing/selftests/rcutorture/configs/rcu/BUSTED.boot
new file mode 100644
index 000000000..6804f9dcf
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/BUSTED.boot
@@ -0,0 +1 @@
+rcutorture.torture_type=rcu_busted
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/CFLIST b/kernel/tools/testing/selftests/rcutorture/configs/rcu/CFLIST
new file mode 100644
index 000000000..a3a1a05a2
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/CFLIST
@@ -0,0 +1,16 @@
+TREE01
+TREE02
+TREE03
+TREE04
+TREE05
+TREE06
+TREE07
+TREE08
+TREE09
+SRCU-N
+SRCU-P
+TINY01
+TINY02
+TASKS01
+TASKS02
+TASKS03
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/CFcommon b/kernel/tools/testing/selftests/rcutorture/configs/rcu/CFcommon
new file mode 100644
index 000000000..49701218d
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/CFcommon
@@ -0,0 +1,3 @@
+CONFIG_RCU_TORTURE_TEST=y
+CONFIG_PRINTK_TIME=y
+CONFIG_RCU_TORTURE_TEST_SLOW_INIT=y
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/SRCU-N b/kernel/tools/testing/selftests/rcutorture/configs/rcu/SRCU-N
new file mode 100644
index 000000000..9fbb41b9b
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/SRCU-N
@@ -0,0 +1,7 @@
+CONFIG_RCU_TRACE=n
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PREEMPT_NONE=y
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=n
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/SRCU-N.boot b/kernel/tools/testing/selftests/rcutorture/configs/rcu/SRCU-N.boot
new file mode 100644
index 000000000..238bfe3bd
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/SRCU-N.boot
@@ -0,0 +1 @@
+rcutorture.torture_type=srcu
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/SRCU-P b/kernel/tools/testing/selftests/rcutorture/configs/rcu/SRCU-P
new file mode 100644
index 000000000..4b6f272db
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/SRCU-P
@@ -0,0 +1,7 @@
+CONFIG_RCU_TRACE=n
+CONFIG_SMP=y
+CONFIG_NR_CPUS=8
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PREEMPT_NONE=n
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=y
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/SRCU-P.boot b/kernel/tools/testing/selftests/rcutorture/configs/rcu/SRCU-P.boot
new file mode 100644
index 000000000..238bfe3bd
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/SRCU-P.boot
@@ -0,0 +1 @@
+rcutorture.torture_type=srcu
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS01 b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS01
new file mode 100644
index 000000000..97f0a0b27
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS01
@@ -0,0 +1,9 @@
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PREEMPT_NONE=n
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_RCU=y
+CONFIG_TASKS_RCU=y
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS01.boot b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS01.boot
new file mode 100644
index 000000000..cd2a188ee
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS01.boot
@@ -0,0 +1 @@
+rcutorture.torture_type=tasks
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS02 b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS02
new file mode 100644
index 000000000..696d2ea74
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS02
@@ -0,0 +1,5 @@
+CONFIG_SMP=n
+CONFIG_PREEMPT_NONE=y
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=n
+CONFIG_TASKS_RCU=y
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS02.boot b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS02.boot
new file mode 100644
index 000000000..cd2a188ee
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS02.boot
@@ -0,0 +1 @@
+rcutorture.torture_type=tasks
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS03 b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS03
new file mode 100644
index 000000000..9c60da5b5
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS03
@@ -0,0 +1,13 @@
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_HOTPLUG_CPU=n
+CONFIG_SUSPEND=n
+CONFIG_HIBERNATION=n
+CONFIG_PREEMPT_NONE=n
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=y
+CONFIG_TASKS_RCU=y
+CONFIG_HZ_PERIODIC=n
+CONFIG_NO_HZ_IDLE=n
+CONFIG_NO_HZ_FULL=y
+CONFIG_NO_HZ_FULL_ALL=y
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS03.boot b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS03.boot
new file mode 100644
index 000000000..cd2a188ee
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TASKS03.boot
@@ -0,0 +1 @@
+rcutorture.torture_type=tasks
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TINY01 b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TINY01
new file mode 100644
index 000000000..0a63e073a
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TINY01
@@ -0,0 +1,12 @@
+CONFIG_SMP=n
+CONFIG_PREEMPT_NONE=y
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=n
+#CHECK#CONFIG_TINY_RCU=y
+CONFIG_HZ_PERIODIC=n
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NO_HZ_FULL=n
+CONFIG_RCU_TRACE=n
+CONFIG_DEBUG_LOCK_ALLOC=n
+CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
+CONFIG_PREEMPT_COUNT=n
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TINY02 b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TINY02
new file mode 100644
index 000000000..36e41df3d
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TINY02
@@ -0,0 +1,14 @@
+CONFIG_SMP=n
+CONFIG_PREEMPT_NONE=y
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=n
+#CHECK#CONFIG_TINY_RCU=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_NO_HZ_IDLE=n
+CONFIG_NO_HZ_FULL=n
+CONFIG_RCU_TRACE=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_PROVE_RCU=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
+CONFIG_PREEMPT_COUNT=y
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TINY02.boot b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TINY02.boot
new file mode 100644
index 000000000..0f0802730
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TINY02.boot
@@ -0,0 +1,2 @@
+rcupdate.rcu_self_test=1
+rcupdate.rcu_self_test_bh=1
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE01 b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE01
new file mode 100644
index 000000000..f8a10a750
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE01
@@ -0,0 +1,18 @@
+CONFIG_SMP=y
+CONFIG_PREEMPT_NONE=n
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=y
+#CHECK#CONFIG_PREEMPT_RCU=y
+CONFIG_HZ_PERIODIC=n
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NO_HZ_FULL=n
+CONFIG_RCU_FAST_NO_HZ=y
+CONFIG_RCU_TRACE=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_MAXSMP=y
+CONFIG_RCU_NOCB_CPU=y
+CONFIG_RCU_NOCB_CPU_ZERO=y
+CONFIG_DEBUG_LOCK_ALLOC=n
+CONFIG_RCU_CPU_STALL_INFO=n
+CONFIG_RCU_BOOST=n
+CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE01.boot b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE01.boot
new file mode 100644
index 000000000..adc3abc82
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE01.boot
@@ -0,0 +1 @@
+rcutorture.torture_type=rcu_bh maxcpus=8
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE02 b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE02
new file mode 100644
index 000000000..629122fb8
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE02
@@ -0,0 +1,23 @@
+CONFIG_SMP=y
+CONFIG_NR_CPUS=8
+CONFIG_PREEMPT_NONE=n
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=y
+#CHECK#CONFIG_PREEMPT_RCU=y
+CONFIG_HZ_PERIODIC=n
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NO_HZ_FULL=n
+CONFIG_RCU_FAST_NO_HZ=n
+CONFIG_RCU_TRACE=n
+CONFIG_HOTPLUG_CPU=n
+CONFIG_SUSPEND=n
+CONFIG_HIBERNATION=n
+CONFIG_RCU_FANOUT=3
+CONFIG_RCU_FANOUT_LEAF=3
+CONFIG_RCU_FANOUT_EXACT=n
+CONFIG_RCU_NOCB_CPU=n
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=n
+CONFIG_RCU_CPU_STALL_INFO=n
+CONFIG_RCU_BOOST=n
+CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE02-T b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE02-T
new file mode 100644
index 000000000..a25de4788
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE02-T
@@ -0,0 +1,23 @@
+CONFIG_SMP=y
+CONFIG_NR_CPUS=8
+CONFIG_PREEMPT_NONE=n
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=y
+#CHECK#CONFIG_PREEMPT_RCU=y
+CONFIG_HZ_PERIODIC=n
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NO_HZ_FULL=n
+CONFIG_RCU_FAST_NO_HZ=n
+CONFIG_RCU_TRACE=y
+CONFIG_HOTPLUG_CPU=n
+CONFIG_SUSPEND=n
+CONFIG_HIBERNATION=n
+CONFIG_RCU_FANOUT=3
+CONFIG_RCU_FANOUT_LEAF=3
+CONFIG_RCU_FANOUT_EXACT=n
+CONFIG_RCU_NOCB_CPU=n
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=n
+CONFIG_RCU_CPU_STALL_INFO=n
+CONFIG_RCU_BOOST=n
+CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE03 b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE03
new file mode 100644
index 000000000..53f24e0a0
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE03
@@ -0,0 +1,20 @@
+CONFIG_SMP=y
+CONFIG_NR_CPUS=8
+CONFIG_PREEMPT_NONE=n
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=y
+#CHECK#CONFIG_PREEMPT_RCU=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_NO_HZ_IDLE=n
+CONFIG_NO_HZ_FULL=n
+CONFIG_RCU_TRACE=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_RCU_FANOUT=4
+CONFIG_RCU_FANOUT_LEAF=4
+CONFIG_RCU_FANOUT_EXACT=n
+CONFIG_RCU_NOCB_CPU=n
+CONFIG_DEBUG_LOCK_ALLOC=n
+CONFIG_RCU_CPU_STALL_INFO=n
+CONFIG_RCU_BOOST=y
+CONFIG_RCU_KTHREAD_PRIO=2
+CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE04 b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE04
new file mode 100644
index 000000000..0f84db35b
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE04
@@ -0,0 +1,22 @@
+CONFIG_SMP=y
+CONFIG_NR_CPUS=8
+CONFIG_PREEMPT_NONE=y
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=n
+#CHECK#CONFIG_TREE_RCU=y
+CONFIG_HZ_PERIODIC=n
+CONFIG_NO_HZ_IDLE=n
+CONFIG_NO_HZ_FULL=y
+CONFIG_NO_HZ_FULL_ALL=y
+CONFIG_RCU_FAST_NO_HZ=y
+CONFIG_RCU_TRACE=y
+CONFIG_HOTPLUG_CPU=n
+CONFIG_SUSPEND=n
+CONFIG_HIBERNATION=n
+CONFIG_RCU_FANOUT=2
+CONFIG_RCU_FANOUT_LEAF=2
+CONFIG_RCU_FANOUT_EXACT=n
+CONFIG_RCU_NOCB_CPU=n
+CONFIG_DEBUG_LOCK_ALLOC=n
+CONFIG_RCU_CPU_STALL_INFO=y
+CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE04.boot b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE04.boot
new file mode 100644
index 000000000..0fc8a3428
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE04.boot
@@ -0,0 +1 @@
+rcutorture.torture_type=rcu_bh
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE05 b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE05
new file mode 100644
index 000000000..212e3bfd2
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE05
@@ -0,0 +1,22 @@
+CONFIG_SMP=y
+CONFIG_NR_CPUS=8
+CONFIG_PREEMPT_NONE=y
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=n
+#CHECK#CONFIG_TREE_RCU=y
+CONFIG_HZ_PERIODIC=n
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NO_HZ_FULL=n
+CONFIG_RCU_FAST_NO_HZ=n
+CONFIG_RCU_TRACE=n
+CONFIG_HOTPLUG_CPU=y
+CONFIG_RCU_FANOUT=6
+CONFIG_RCU_FANOUT_LEAF=6
+CONFIG_RCU_FANOUT_EXACT=n
+CONFIG_RCU_NOCB_CPU=y
+CONFIG_RCU_NOCB_CPU_NONE=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_PROVE_RCU=y
+CONFIG_RCU_CPU_STALL_INFO=n
+CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE05.boot b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE05.boot
new file mode 100644
index 000000000..15b3e1a86
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE05.boot
@@ -0,0 +1,2 @@
+rcutorture.torture_type=sched
+rcupdate.rcu_self_test_sched=1
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE06 b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE06
new file mode 100644
index 000000000..7eee63b44
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE06
@@ -0,0 +1,23 @@
+CONFIG_SMP=y
+CONFIG_NR_CPUS=8
+CONFIG_PREEMPT_NONE=y
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=n
+#CHECK#CONFIG_TREE_RCU=y
+CONFIG_HZ_PERIODIC=n
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NO_HZ_FULL=n
+CONFIG_RCU_FAST_NO_HZ=n
+CONFIG_RCU_TRACE=n
+CONFIG_HOTPLUG_CPU=n
+CONFIG_SUSPEND=n
+CONFIG_HIBERNATION=n
+CONFIG_RCU_FANOUT=6
+CONFIG_RCU_FANOUT_LEAF=6
+CONFIG_RCU_FANOUT_EXACT=y
+CONFIG_RCU_NOCB_CPU=n
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_PROVE_RCU=y
+CONFIG_RCU_CPU_STALL_INFO=n
+CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE06.boot b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE06.boot
new file mode 100644
index 000000000..da9a03a39
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE06.boot
@@ -0,0 +1,3 @@
+rcupdate.rcu_self_test=1
+rcupdate.rcu_self_test_bh=1
+rcupdate.rcu_self_test_sched=1
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE07 b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE07
new file mode 100644
index 000000000..92a97fa97
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE07
@@ -0,0 +1,22 @@
+CONFIG_SMP=y
+CONFIG_NR_CPUS=16
+CONFIG_CPUMASK_OFFSTACK=y
+CONFIG_PREEMPT_NONE=y
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=n
+#CHECK#CONFIG_TREE_RCU=y
+CONFIG_HZ_PERIODIC=n
+CONFIG_NO_HZ_IDLE=n
+CONFIG_NO_HZ_FULL=y
+CONFIG_NO_HZ_FULL_ALL=n
+CONFIG_NO_HZ_FULL_SYSIDLE=y
+CONFIG_RCU_FAST_NO_HZ=n
+CONFIG_RCU_TRACE=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_RCU_FANOUT=2
+CONFIG_RCU_FANOUT_LEAF=2
+CONFIG_RCU_FANOUT_EXACT=n
+CONFIG_RCU_NOCB_CPU=n
+CONFIG_DEBUG_LOCK_ALLOC=n
+CONFIG_RCU_CPU_STALL_INFO=y
+CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE07.boot b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE07.boot
new file mode 100644
index 000000000..d44609937
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE07.boot
@@ -0,0 +1 @@
+nohz_full=2-9
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE08 b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE08
new file mode 100644
index 000000000..5812027d6
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE08
@@ -0,0 +1,25 @@
+CONFIG_SMP=y
+CONFIG_NR_CPUS=16
+CONFIG_PREEMPT_NONE=n
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=y
+#CHECK#CONFIG_PREEMPT_RCU=y
+CONFIG_HZ_PERIODIC=n
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NO_HZ_FULL=n
+CONFIG_RCU_FAST_NO_HZ=n
+CONFIG_RCU_TRACE=n
+CONFIG_HOTPLUG_CPU=n
+CONFIG_SUSPEND=n
+CONFIG_HIBERNATION=n
+CONFIG_RCU_FANOUT=3
+CONFIG_RCU_FANOUT_EXACT=y
+CONFIG_RCU_FANOUT_LEAF=2
+CONFIG_RCU_NOCB_CPU=y
+CONFIG_RCU_NOCB_CPU_ALL=y
+CONFIG_DEBUG_LOCK_ALLOC=n
+CONFIG_PROVE_LOCKING=y
+CONFIG_PROVE_RCU=y
+CONFIG_RCU_CPU_STALL_INFO=n
+CONFIG_RCU_BOOST=n
+CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE08-T b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE08-T
new file mode 100644
index 000000000..3eaeccacb
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE08-T
@@ -0,0 +1,23 @@
+CONFIG_SMP=y
+CONFIG_NR_CPUS=16
+CONFIG_PREEMPT_NONE=n
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=y
+#CHECK#CONFIG_PREEMPT_RCU=y
+CONFIG_HZ_PERIODIC=n
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NO_HZ_FULL=n
+CONFIG_RCU_FAST_NO_HZ=n
+CONFIG_RCU_TRACE=y
+CONFIG_HOTPLUG_CPU=n
+CONFIG_SUSPEND=n
+CONFIG_HIBERNATION=n
+CONFIG_RCU_FANOUT=3
+CONFIG_RCU_FANOUT_EXACT=y
+CONFIG_RCU_FANOUT_LEAF=2
+CONFIG_RCU_NOCB_CPU=y
+CONFIG_RCU_NOCB_CPU_ALL=y
+CONFIG_DEBUG_LOCK_ALLOC=n
+CONFIG_RCU_CPU_STALL_INFO=n
+CONFIG_RCU_BOOST=n
+CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE08.boot b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE08.boot
new file mode 100644
index 000000000..2561daf60
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE08.boot
@@ -0,0 +1,3 @@
+rcutorture.torture_type=sched
+rcupdate.rcu_self_test=1
+rcupdate.rcu_self_test_sched=1
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE09 b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE09
new file mode 100644
index 000000000..6076b36f6
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/TREE09
@@ -0,0 +1,18 @@
+CONFIG_SMP=n
+CONFIG_NR_CPUS=1
+CONFIG_PREEMPT_NONE=n
+CONFIG_PREEMPT_VOLUNTARY=n
+CONFIG_PREEMPT=y
+#CHECK#CONFIG_PREEMPT_RCU=y
+CONFIG_HZ_PERIODIC=n
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NO_HZ_FULL=n
+CONFIG_RCU_TRACE=n
+CONFIG_HOTPLUG_CPU=n
+CONFIG_SUSPEND=n
+CONFIG_HIBERNATION=n
+CONFIG_RCU_NOCB_CPU=n
+CONFIG_DEBUG_LOCK_ALLOC=n
+CONFIG_RCU_CPU_STALL_INFO=n
+CONFIG_RCU_BOOST=n
+CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
diff --git a/kernel/tools/testing/selftests/rcutorture/configs/rcu/ver_functions.sh b/kernel/tools/testing/selftests/rcutorture/configs/rcu/ver_functions.sh
new file mode 100644
index 000000000..ffb85ed78
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/configs/rcu/ver_functions.sh
@@ -0,0 +1,57 @@
+#!/bin/bash
+#
+# Kernel-version-dependent shell functions for the rest of the scripts.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, you can access it online at
+# http://www.gnu.org/licenses/gpl-2.0.html.
+#
+# Copyright (C) IBM Corporation, 2013
+#
+# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
+
+# rcutorture_param_n_barrier_cbs bootparam-string
+#
+# Adds n_barrier_cbs rcutorture module parameter to kernels having it.
+rcutorture_param_n_barrier_cbs () {
+ if echo $1 | grep -q "rcutorture\.n_barrier_cbs"
+ then
+ :
+ else
+ echo rcutorture.n_barrier_cbs=4
+ fi
+}
+
+# rcutorture_param_onoff bootparam-string config-file
+#
+# Adds onoff rcutorture module parameters to kernels having it.
+rcutorture_param_onoff () {
+ if ! bootparam_hotplug_cpu "$1" && configfrag_hotplug_cpu "$2"
+ then
+ echo CPU-hotplug kernel, adding rcutorture onoff. 1>&2
+ echo rcutorture.onoff_interval=3 rcutorture.onoff_holdoff=30
+ fi
+}
+
+# per_version_boot_params bootparam-string config-file seconds
+#
+# Adds per-version torture-module parameters to kernels supporting them.
+per_version_boot_params () {
+ echo $1 `rcutorture_param_onoff "$1" "$2"` \
+ `rcutorture_param_n_barrier_cbs "$1"` \
+ rcutorture.stat_interval=15 \
+ rcutorture.shutdown_secs=$3 \
+ rcutorture.torture_runnable=1 \
+ rcutorture.test_no_idle_hz=1 \
+ rcutorture.verbose=1
+}
diff --git a/kernel/tools/testing/selftests/rcutorture/doc/TINY_RCU.txt b/kernel/tools/testing/selftests/rcutorture/doc/TINY_RCU.txt
new file mode 100644
index 000000000..9ef33a743
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/doc/TINY_RCU.txt
@@ -0,0 +1,40 @@
+This document gives a brief rationale for the TINY_RCU test cases.
+
+
+Kconfig Parameters:
+
+CONFIG_DEBUG_LOCK_ALLOC -- Do all three and none of the three.
+CONFIG_PREEMPT_COUNT
+CONFIG_RCU_TRACE
+
+The theory here is that randconfig testing will hit the other six possible
+combinations of these parameters.
+
+
+Kconfig Parameters Ignored:
+
+CONFIG_DEBUG_OBJECTS_RCU_HEAD
+CONFIG_PROVE_RCU
+
+ In common code tested by TREE_RCU test cases.
+
+CONFIG_NO_HZ_FULL_SYSIDLE
+CONFIG_RCU_NOCB_CPU
+CONFIG_RCU_USER_QS
+
+ Meaningless for TINY_RCU.
+
+CONFIG_RCU_STALL_COMMON
+CONFIG_RCU_TORTURE_TEST
+
+ Redundant with CONFIG_RCU_TRACE.
+
+CONFIG_HOTPLUG_CPU
+CONFIG_PREEMPT
+CONFIG_PREEMPT_RCU
+CONFIG_SMP
+CONFIG_TINY_RCU
+CONFIG_PREEMPT_RCU
+CONFIG_TREE_RCU
+
+ All forced by CONFIG_TINY_RCU.
diff --git a/kernel/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt b/kernel/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt
new file mode 100644
index 000000000..ec03c883d
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/doc/TREE_RCU-kconfig.txt
@@ -0,0 +1,93 @@
+This document gives a brief rationale for the TREE_RCU-related test
+cases, a group that includes PREEMPT_RCU.
+
+
+Kconfig Parameters:
+
+CONFIG_DEBUG_LOCK_ALLOC -- Do three, covering CONFIG_PROVE_LOCKING & not.
+CONFIG_DEBUG_OBJECTS_RCU_HEAD -- Do one.
+CONFIG_HOTPLUG_CPU -- Do half. (Every second.)
+CONFIG_HZ_PERIODIC -- Do one.
+CONFIG_NO_HZ_IDLE -- Do those not otherwise specified. (Groups of two.)
+CONFIG_NO_HZ_FULL -- Do two, one with CONFIG_NO_HZ_FULL_SYSIDLE.
+CONFIG_NO_HZ_FULL_SYSIDLE -- Do one.
+CONFIG_PREEMPT -- Do half. (First three and #8.)
+CONFIG_PROVE_LOCKING -- Do all but two, covering CONFIG_PROVE_RCU and not.
+CONFIG_PROVE_RCU -- Do all but one under CONFIG_PROVE_LOCKING.
+CONFIG_RCU_BOOST -- one of PREEMPT_RCU.
+CONFIG_RCU_KTHREAD_PRIO -- set to 2 for _BOOST testing.
+CONFIG_RCU_CPU_STALL_INFO -- Do one.
+CONFIG_RCU_FANOUT -- Cover hierarchy as currently, but overlap with others.
+CONFIG_RCU_FANOUT_EXACT -- Do one.
+CONFIG_RCU_FANOUT_LEAF -- Do one non-default.
+CONFIG_RCU_FAST_NO_HZ -- Do one, but not with CONFIG_RCU_NOCB_CPU_ALL.
+CONFIG_RCU_NOCB_CPU -- Do three, see below.
+CONFIG_RCU_NOCB_CPU_ALL -- Do one.
+CONFIG_RCU_NOCB_CPU_NONE -- Do one.
+CONFIG_RCU_NOCB_CPU_ZERO -- Do one.
+CONFIG_RCU_TRACE -- Do half.
+CONFIG_SMP -- Need one !SMP for PREEMPT_RCU.
+RCU-bh: Do one with PREEMPT and one with !PREEMPT.
+RCU-sched: Do one with PREEMPT but not BOOST.
+
+
+Hierarchy:
+
+TREE01. CONFIG_NR_CPUS=8, CONFIG_RCU_FANOUT=8, CONFIG_RCU_FANOUT_EXACT=n.
+TREE02. CONFIG_NR_CPUS=8, CONFIG_RCU_FANOUT=3, CONFIG_RCU_FANOUT_EXACT=n,
+ CONFIG_RCU_FANOUT_LEAF=3.
+TREE03. CONFIG_NR_CPUS=8, CONFIG_RCU_FANOUT=4, CONFIG_RCU_FANOUT_EXACT=n,
+ CONFIG_RCU_FANOUT_LEAF=4.
+TREE04. CONFIG_NR_CPUS=8, CONFIG_RCU_FANOUT=2, CONFIG_RCU_FANOUT_EXACT=n,
+ CONFIG_RCU_FANOUT_LEAF=2.
+TREE05. CONFIG_NR_CPUS=8, CONFIG_RCU_FANOUT=6, CONFIG_RCU_FANOUT_EXACT=n
+ CONFIG_RCU_FANOUT_LEAF=6.
+TREE06. CONFIG_NR_CPUS=8, CONFIG_RCU_FANOUT=6, CONFIG_RCU_FANOUT_EXACT=y
+ CONFIG_RCU_FANOUT_LEAF=6.
+TREE07. CONFIG_NR_CPUS=16, CONFIG_RCU_FANOUT=2, CONFIG_RCU_FANOUT_EXACT=n,
+ CONFIG_RCU_FANOUT_LEAF=2.
+TREE08. CONFIG_NR_CPUS=16, CONFIG_RCU_FANOUT=3, CONFIG_RCU_FANOUT_EXACT=y,
+ CONFIG_RCU_FANOUT_LEAF=2.
+TREE09. CONFIG_NR_CPUS=1.
+
+
+Kconfig Parameters Ignored:
+
+CONFIG_64BIT
+
+ Used only to check CONFIG_RCU_FANOUT value, inspection suffices.
+
+CONFIG_NO_HZ_FULL_SYSIDLE_SMALL
+
+ Defer until Frederic uses this.
+
+CONFIG_PREEMPT_COUNT
+CONFIG_PREEMPT_RCU
+
+ Redundant with CONFIG_PREEMPT, ignore.
+
+CONFIG_RCU_BOOST_DELAY
+
+ Inspection suffices, ignore.
+
+CONFIG_RCU_CPU_STALL_TIMEOUT
+
+ Inspection suffices, ignore.
+
+CONFIG_RCU_STALL_COMMON
+
+ Implied by TREE_RCU and PREEMPT_RCU.
+
+CONFIG_RCU_TORTURE_TEST
+CONFIG_RCU_TORTURE_TEST_RUNNABLE
+
+ Always used in KVM testing.
+
+CONFIG_RCU_USER_QS
+
+ Redundant with CONFIG_NO_HZ_FULL.
+
+CONFIG_PREEMPT_RCU
+CONFIG_TREE_RCU
+
+ These are controlled by CONFIG_PREEMPT.
diff --git a/kernel/tools/testing/selftests/rcutorture/doc/initrd.txt b/kernel/tools/testing/selftests/rcutorture/doc/initrd.txt
new file mode 100644
index 000000000..4170e714f
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/doc/initrd.txt
@@ -0,0 +1,91 @@
+This document describes one way to create the initrd directory hierarchy
+in order to allow an initrd to be built into your kernel. The trick
+here is to steal the initrd file used on your Linux laptop, Ubuntu in
+this case. There are probably much better ways of doing this.
+
+That said, here are the commands:
+
+------------------------------------------------------------------------
+cd tools/testing/selftests/rcutorture
+zcat /initrd.img > /tmp/initrd.img.zcat
+mkdir initrd
+cd initrd
+cpio -id < /tmp/initrd.img.zcat
+------------------------------------------------------------------------
+
+Interestingly enough, if you are running rcutorture, you don't really
+need userspace in many cases. Running without userspace has the
+advantage of allowing you to test your kernel independently of the
+distro in place, the root-filesystem layout, and so on. To make this
+happen, put the following script in the initrd's tree's "/init" file,
+with 0755 mode.
+
+------------------------------------------------------------------------
+#!/bin/sh
+
+[ -d /dev ] || mkdir -m 0755 /dev
+[ -d /root ] || mkdir -m 0700 /root
+[ -d /sys ] || mkdir /sys
+[ -d /proc ] || mkdir /proc
+[ -d /tmp ] || mkdir /tmp
+mkdir -p /var/lock
+mount -t sysfs -o nodev,noexec,nosuid sysfs /sys
+mount -t proc -o nodev,noexec,nosuid proc /proc
+# Some things don't work properly without /etc/mtab.
+ln -sf /proc/mounts /etc/mtab
+
+# Note that this only becomes /dev on the real filesystem if udev's scripts
+# are used; which they will be, but it's worth pointing out
+if ! mount -t devtmpfs -o mode=0755 udev /dev; then
+ echo "W: devtmpfs not available, falling back to tmpfs for /dev"
+ mount -t tmpfs -o mode=0755 udev /dev
+ [ -e /dev/console ] || mknod --mode=600 /dev/console c 5 1
+ [ -e /dev/kmsg ] || mknod --mode=644 /dev/kmsg c 1 11
+ [ -e /dev/null ] || mknod --mode=666 /dev/null c 1 3
+fi
+
+mkdir /dev/pts
+mount -t devpts -o noexec,nosuid,gid=5,mode=0620 devpts /dev/pts || true
+mount -t tmpfs -o "nosuid,size=20%,mode=0755" tmpfs /run
+mkdir /run/initramfs
+# compatibility symlink for the pre-oneiric locations
+ln -s /run/initramfs /dev/.initramfs
+
+# Export relevant variables
+export ROOT=
+export ROOTDELAY=
+export ROOTFLAGS=
+export ROOTFSTYPE=
+export IP=
+export BOOT=
+export BOOTIF=
+export UBIMTD=
+export break=
+export init=/sbin/init
+export quiet=n
+export readonly=y
+export rootmnt=/root
+export debug=
+export panic=
+export blacklist=
+export resume=
+export resume_offset=
+export recovery=
+
+for i in /sys/devices/system/cpu/cpu*/online
+do
+ case $i in
+ '/sys/devices/system/cpu/cpu0/online')
+ ;;
+ '/sys/devices/system/cpu/cpu*/online')
+ ;;
+ *)
+ echo 1 > $i
+ ;;
+ esac
+done
+
+while :
+do
+ sleep 10
+done
diff --git a/kernel/tools/testing/selftests/rcutorture/doc/rcu-test-image.txt b/kernel/tools/testing/selftests/rcutorture/doc/rcu-test-image.txt
new file mode 100644
index 000000000..66efb59a1
--- /dev/null
+++ b/kernel/tools/testing/selftests/rcutorture/doc/rcu-test-image.txt
@@ -0,0 +1,42 @@
+This document describes one way to created the rcu-test-image file
+that contains the filesystem used by the guest-OS kernel. There are
+probably much better ways of doing this, and this filesystem could no
+doubt be smaller. It is probably also possible to simply download
+an appropriate image from any number of places.
+
+That said, here are the commands:
+
+------------------------------------------------------------------------
+dd if=/dev/zero of=rcu-test-image bs=400M count=1
+mkfs.ext3 ./rcu-test-image
+sudo mount -o loop ./rcu-test-image /mnt
+
+# Replace "precise" below with your favorite Ubuntu release.
+# Empirical evidence says this image will work for 64-bit, but...
+# Note that debootstrap does take a few minutes to run. Or longer.
+sudo debootstrap --verbose --arch i386 precise /mnt http://archive.ubuntu.com/ubuntu
+cat << '___EOF___' | sudo dd of=/mnt/etc/fstab
+# UNCONFIGURED FSTAB FOR BASE SYSTEM
+#
+/dev/vda / ext3 defaults 1 1
+dev /dev tmpfs rw 0 0
+tmpfs /dev/shm tmpfs defaults 0 0
+devpts /dev/pts devpts gid=5,mode=620 0 0
+sysfs /sys sysfs defaults 0 0
+proc /proc proc defaults 0 0
+___EOF___
+sudo umount /mnt
+------------------------------------------------------------------------
+
+
+References:
+
+ http://sripathikodi.blogspot.com/2010/02/creating-kvm-bootable-fedora-system.html
+ https://help.ubuntu.com/community/KVM/CreateGuests
+ https://help.ubuntu.com/community/JeOSVMBuilder
+ http://wiki.libvirt.org/page/UbuntuKVMWalkthrough
+ http://www.moe.co.uk/2011/01/07/pci_add_option_rom-failed-to-find-romfile-pxe-rtl8139-bin/ -- "apt-get install kvm-pxe"
+ http://www.landley.net/writing/rootfs-howto.html
+ http://en.wikipedia.org/wiki/Initrd
+ http://en.wikipedia.org/wiki/Cpio
+ http://wiki.libvirt.org/page/UbuntuKVMWalkthrough
diff --git a/kernel/tools/testing/selftests/size/.gitignore b/kernel/tools/testing/selftests/size/.gitignore
new file mode 100644
index 000000000..189b7818d
--- /dev/null
+++ b/kernel/tools/testing/selftests/size/.gitignore
@@ -0,0 +1 @@
+get_size
diff --git a/kernel/tools/testing/selftests/size/Makefile b/kernel/tools/testing/selftests/size/Makefile
new file mode 100644
index 000000000..bbd0b5398
--- /dev/null
+++ b/kernel/tools/testing/selftests/size/Makefile
@@ -0,0 +1,11 @@
+all: get_size
+
+get_size: get_size.c
+ $(CC) -static -ffreestanding -nostartfiles -s $< -o $@
+
+TEST_PROGS := get_size
+
+include ../lib.mk
+
+clean:
+ $(RM) get_size
diff --git a/kernel/tools/testing/selftests/size/get_size.c b/kernel/tools/testing/selftests/size/get_size.c
new file mode 100644
index 000000000..2d1af7cca
--- /dev/null
+++ b/kernel/tools/testing/selftests/size/get_size.c
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2014 Sony Mobile Communications Inc.
+ *
+ * Licensed under the terms of the GNU GPL License version 2
+ *
+ * Selftest for runtime system size
+ *
+ * Prints the amount of RAM that the currently running system is using.
+ *
+ * This program tries to be as small as possible itself, to
+ * avoid perturbing the system memory utilization with its
+ * own execution. It also attempts to have as few dependencies
+ * on kernel features as possible.
+ *
+ * It should be statically linked, with startup libs avoided.
+ * It uses no library calls, and only the following 3 syscalls:
+ * sysinfo(), write(), and _exit()
+ *
+ * For output, it avoids printf (which in some C libraries
+ * has large external dependencies) by implementing it's own
+ * number output and print routines, and using __builtin_strlen()
+ */
+
+#include <sys/sysinfo.h>
+#include <unistd.h>
+
+#define STDOUT_FILENO 1
+
+static int print(const char *s)
+{
+ return write(STDOUT_FILENO, s, __builtin_strlen(s));
+}
+
+static inline char *num_to_str(unsigned long num, char *buf, int len)
+{
+ unsigned int digit;
+
+ /* put digits in buffer from back to front */
+ buf += len - 1;
+ *buf = 0;
+ do {
+ digit = num % 10;
+ *(--buf) = digit + '0';
+ num /= 10;
+ } while (num > 0);
+
+ return buf;
+}
+
+static int print_num(unsigned long num)
+{
+ char num_buf[30];
+
+ return print(num_to_str(num, num_buf, sizeof(num_buf)));
+}
+
+static int print_k_value(const char *s, unsigned long num, unsigned long units)
+{
+ unsigned long long temp;
+ int ccode;
+
+ print(s);
+
+ temp = num;
+ temp = (temp * units)/1024;
+ num = temp;
+ ccode = print_num(num);
+ print("\n");
+ return ccode;
+}
+
+/* this program has no main(), as startup libraries are not used */
+void _start(void)
+{
+ int ccode;
+ struct sysinfo info;
+ unsigned long used;
+
+ print("Testing system size.\n");
+ print("1..1\n");
+
+ ccode = sysinfo(&info);
+ if (ccode < 0) {
+ print("not ok 1 get runtime memory use\n");
+ print("# could not get sysinfo\n");
+ _exit(ccode);
+ }
+ /* ignore cache complexities for now */
+ used = info.totalram - info.freeram - info.bufferram;
+ print_k_value("ok 1 get runtime memory use # size = ", used,
+ info.mem_unit);
+
+ print("# System runtime memory report (units in Kilobytes):\n");
+ print_k_value("# Total: ", info.totalram, info.mem_unit);
+ print_k_value("# Free: ", info.freeram, info.mem_unit);
+ print_k_value("# Buffer: ", info.bufferram, info.mem_unit);
+ print_k_value("# In use: ", used, info.mem_unit);
+
+ _exit(0);
+}
diff --git a/kernel/tools/testing/selftests/sysctl/Makefile b/kernel/tools/testing/selftests/sysctl/Makefile
new file mode 100644
index 000000000..b3c33e071
--- /dev/null
+++ b/kernel/tools/testing/selftests/sysctl/Makefile
@@ -0,0 +1,13 @@
+# Makefile for sysctl selftests.
+# Expects kernel.sysctl_writes_strict=1.
+
+# No binaries, but make sure arg-less "make" doesn't trigger "run_tests".
+all:
+
+TEST_PROGS := run_numerictests run_stringtests
+TEST_FILES := common_tests
+
+include ../lib.mk
+
+# Nothing to clean up.
+clean:
diff --git a/kernel/tools/testing/selftests/sysctl/common_tests b/kernel/tools/testing/selftests/sysctl/common_tests
new file mode 100644
index 000000000..17d534b1b
--- /dev/null
+++ b/kernel/tools/testing/selftests/sysctl/common_tests
@@ -0,0 +1,109 @@
+#!/bin/sh
+
+TEST_FILE=$(mktemp)
+
+echo "== Testing sysctl behavior against ${TARGET} =="
+
+set_orig()
+{
+ echo "${ORIG}" > "${TARGET}"
+}
+
+set_test()
+{
+ echo "${TEST_STR}" > "${TARGET}"
+}
+
+verify()
+{
+ local seen
+ seen=$(cat "$1")
+ if [ "${seen}" != "${TEST_STR}" ]; then
+ return 1
+ fi
+ return 0
+}
+
+trap 'set_orig; rm -f "${TEST_FILE}"' EXIT
+
+rc=0
+
+echo -n "Writing test file ... "
+echo "${TEST_STR}" > "${TEST_FILE}"
+if ! verify "${TEST_FILE}"; then
+ echo "FAIL" >&2
+ exit 1
+else
+ echo "ok"
+fi
+
+echo -n "Checking sysctl is not set to test value ... "
+if verify "${TARGET}"; then
+ echo "FAIL" >&2
+ exit 1
+else
+ echo "ok"
+fi
+
+echo -n "Writing sysctl from shell ... "
+set_test
+if ! verify "${TARGET}"; then
+ echo "FAIL" >&2
+ exit 1
+else
+ echo "ok"
+fi
+
+echo -n "Resetting sysctl to original value ... "
+set_orig
+if verify "${TARGET}"; then
+ echo "FAIL" >&2
+ exit 1
+else
+ echo "ok"
+fi
+
+# Now that we've validated the sanity of "set_test" and "set_orig",
+# we can use those functions to set starting states before running
+# specific behavioral tests.
+
+echo -n "Writing entire sysctl in single write ... "
+set_orig
+dd if="${TEST_FILE}" of="${TARGET}" bs=4096 2>/dev/null
+if ! verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+else
+ echo "ok"
+fi
+
+echo -n "Writing middle of sysctl after synchronized seek ... "
+set_test
+dd if="${TEST_FILE}" of="${TARGET}" bs=1 seek=1 skip=1 2>/dev/null
+if ! verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+else
+ echo "ok"
+fi
+
+echo -n "Writing beyond end of sysctl ... "
+set_orig
+dd if="${TEST_FILE}" of="${TARGET}" bs=20 seek=2 2>/dev/null
+if verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+else
+ echo "ok"
+fi
+
+echo -n "Writing sysctl with multiple long writes ... "
+set_orig
+(perl -e 'print "A" x 50;'; echo "${TEST_STR}") | \
+ dd of="${TARGET}" bs=50 2>/dev/null
+if verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+else
+ echo "ok"
+fi
diff --git a/kernel/tools/testing/selftests/sysctl/run_numerictests b/kernel/tools/testing/selftests/sysctl/run_numerictests
new file mode 100755
index 000000000..8510f93f2
--- /dev/null
+++ b/kernel/tools/testing/selftests/sysctl/run_numerictests
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+SYSCTL="/proc/sys"
+TARGET="${SYSCTL}/vm/swappiness"
+ORIG=$(cat "${TARGET}")
+TEST_STR=$(( $ORIG + 1 ))
+
+. ./common_tests
+
+exit $rc
diff --git a/kernel/tools/testing/selftests/sysctl/run_stringtests b/kernel/tools/testing/selftests/sysctl/run_stringtests
new file mode 100755
index 000000000..90a9293d5
--- /dev/null
+++ b/kernel/tools/testing/selftests/sysctl/run_stringtests
@@ -0,0 +1,77 @@
+#!/bin/sh
+
+SYSCTL="/proc/sys"
+TARGET="${SYSCTL}/kernel/domainname"
+ORIG=$(cat "${TARGET}")
+TEST_STR="Testing sysctl"
+
+. ./common_tests
+
+# Only string sysctls support seeking/appending.
+MAXLEN=65
+
+echo -n "Writing entire sysctl in short writes ... "
+set_orig
+dd if="${TEST_FILE}" of="${TARGET}" bs=1 2>/dev/null
+if ! verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+else
+ echo "ok"
+fi
+
+echo -n "Writing middle of sysctl after unsynchronized seek ... "
+set_test
+dd if="${TEST_FILE}" of="${TARGET}" bs=1 seek=1 2>/dev/null
+if verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+else
+ echo "ok"
+fi
+
+echo -n "Checking sysctl maxlen is at least $MAXLEN ... "
+set_orig
+perl -e 'print "A" x ('"${MAXLEN}"'-2), "B";' | \
+ dd of="${TARGET}" bs="${MAXLEN}" 2>/dev/null
+if ! grep -q B "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+else
+ echo "ok"
+fi
+
+echo -n "Checking sysctl keeps original string on overflow append ... "
+set_orig
+perl -e 'print "A" x ('"${MAXLEN}"'-1), "B";' | \
+ dd of="${TARGET}" bs=$(( MAXLEN - 1 )) 2>/dev/null
+if grep -q B "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+else
+ echo "ok"
+fi
+
+echo -n "Checking sysctl stays NULL terminated on write ... "
+set_orig
+perl -e 'print "A" x ('"${MAXLEN}"'-1), "B";' | \
+ dd of="${TARGET}" bs="${MAXLEN}" 2>/dev/null
+if grep -q B "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+else
+ echo "ok"
+fi
+
+echo -n "Checking sysctl stays NULL terminated on overwrite ... "
+set_orig
+perl -e 'print "A" x ('"${MAXLEN}"'-1), "BB";' | \
+ dd of="${TARGET}" bs=$(( $MAXLEN + 1 )) 2>/dev/null
+if grep -q B "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+else
+ echo "ok"
+fi
+
+exit $rc
diff --git a/kernel/tools/testing/selftests/timers/Makefile b/kernel/tools/testing/selftests/timers/Makefile
new file mode 100644
index 000000000..89a3f44bf
--- /dev/null
+++ b/kernel/tools/testing/selftests/timers/Makefile
@@ -0,0 +1,36 @@
+CC = $(CROSS_COMPILE)gcc
+BUILD_FLAGS = -DKTEST
+CFLAGS += -O3 -Wl,-no-as-needed -Wall $(BUILD_FLAGS)
+LDFLAGS += -lrt -lpthread
+
+# these are all "safe" tests that don't modify
+# system time or require escalated privledges
+TEST_PROGS = posix_timers nanosleep nsleep-lat set-timer-lat mqueue-lat \
+ inconsistency-check raw_skew threadtest rtctest
+
+TEST_PROGS_EXTENDED = alarmtimer-suspend valid-adjtimex change_skew \
+ skew_consistency clocksource-switch leap-a-day \
+ leapcrash set-tai set-2038
+
+bins = $(TEST_PROGS) $(TEST_PROGS_EXTENDED)
+
+all: ${bins}
+
+include ../lib.mk
+
+# these tests require escalated privledges
+# and may modify the system time or trigger
+# other behavior like suspend
+run_destructive_tests: run_tests
+ ./alarmtimer-suspend
+ ./valid-adjtimex
+ ./change_skew
+ ./skew_consistency
+ ./clocksource-switch
+ ./leap-a-day -s -i 10
+ ./leapcrash
+ ./set-tai
+ ./set-2038
+
+clean:
+ rm -f ${bins}
diff --git a/kernel/tools/testing/selftests/timers/alarmtimer-suspend.c b/kernel/tools/testing/selftests/timers/alarmtimer-suspend.c
new file mode 100644
index 000000000..aaffbde1d
--- /dev/null
+++ b/kernel/tools/testing/selftests/timers/alarmtimer-suspend.c
@@ -0,0 +1,185 @@
+/* alarmtimer suspend test
+ * John Stultz (john.stultz@linaro.org)
+ * (C) Copyright Linaro 2013
+ * Licensed under the GPLv2
+ *
+ * This test makes sure the alarmtimer & RTC wakeup code is
+ * functioning.
+ *
+ * To build:
+ * $ gcc alarmtimer-suspend.c -o alarmtimer-suspend -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <stdio.h>
+#include <unistd.h>
+#include <time.h>
+#include <string.h>
+#include <signal.h>
+#include <stdlib.h>
+#include <pthread.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define CLOCK_REALTIME 0
+#define CLOCK_MONOTONIC 1
+#define CLOCK_PROCESS_CPUTIME_ID 2
+#define CLOCK_THREAD_CPUTIME_ID 3
+#define CLOCK_MONOTONIC_RAW 4
+#define CLOCK_REALTIME_COARSE 5
+#define CLOCK_MONOTONIC_COARSE 6
+#define CLOCK_BOOTTIME 7
+#define CLOCK_REALTIME_ALARM 8
+#define CLOCK_BOOTTIME_ALARM 9
+#define CLOCK_HWSPECIFIC 10
+#define CLOCK_TAI 11
+#define NR_CLOCKIDS 12
+
+
+#define NSEC_PER_SEC 1000000000ULL
+#define UNREASONABLE_LAT (NSEC_PER_SEC * 4) /* hopefully we resume in 4secs */
+
+#define SUSPEND_SECS 15
+int alarmcount;
+int alarm_clock_id;
+struct timespec start_time;
+
+
+char *clockstring(int clockid)
+{
+ switch (clockid) {
+ case CLOCK_REALTIME:
+ return "CLOCK_REALTIME";
+ case CLOCK_MONOTONIC:
+ return "CLOCK_MONOTONIC";
+ case CLOCK_PROCESS_CPUTIME_ID:
+ return "CLOCK_PROCESS_CPUTIME_ID";
+ case CLOCK_THREAD_CPUTIME_ID:
+ return "CLOCK_THREAD_CPUTIME_ID";
+ case CLOCK_MONOTONIC_RAW:
+ return "CLOCK_MONOTONIC_RAW";
+ case CLOCK_REALTIME_COARSE:
+ return "CLOCK_REALTIME_COARSE";
+ case CLOCK_MONOTONIC_COARSE:
+ return "CLOCK_MONOTONIC_COARSE";
+ case CLOCK_BOOTTIME:
+ return "CLOCK_BOOTTIME";
+ case CLOCK_REALTIME_ALARM:
+ return "CLOCK_REALTIME_ALARM";
+ case CLOCK_BOOTTIME_ALARM:
+ return "CLOCK_BOOTTIME_ALARM";
+ case CLOCK_TAI:
+ return "CLOCK_TAI";
+ };
+ return "UNKNOWN_CLOCKID";
+}
+
+
+long long timespec_sub(struct timespec a, struct timespec b)
+{
+ long long ret = NSEC_PER_SEC * b.tv_sec + b.tv_nsec;
+
+ ret -= NSEC_PER_SEC * a.tv_sec + a.tv_nsec;
+ return ret;
+}
+
+int final_ret = 0;
+
+void sigalarm(int signo)
+{
+ long long delta_ns;
+ struct timespec ts;
+
+ clock_gettime(alarm_clock_id, &ts);
+ alarmcount++;
+
+ delta_ns = timespec_sub(start_time, ts);
+ delta_ns -= NSEC_PER_SEC * SUSPEND_SECS * alarmcount;
+
+ printf("ALARM(%i): %ld:%ld latency: %lld ns ", alarmcount, ts.tv_sec,
+ ts.tv_nsec, delta_ns);
+
+ if (delta_ns > UNREASONABLE_LAT) {
+ printf("[FAIL]\n");
+ final_ret = -1;
+ } else
+ printf("[OK]\n");
+
+}
+
+int main(void)
+{
+ timer_t tm1;
+ struct itimerspec its1, its2;
+ struct sigevent se;
+ struct sigaction act;
+ int signum = SIGRTMAX;
+
+ /* Set up signal handler: */
+ sigfillset(&act.sa_mask);
+ act.sa_flags = 0;
+ act.sa_handler = sigalarm;
+ sigaction(signum, &act, NULL);
+
+ /* Set up timer: */
+ memset(&se, 0, sizeof(se));
+ se.sigev_notify = SIGEV_SIGNAL;
+ se.sigev_signo = signum;
+ se.sigev_value.sival_int = 0;
+
+ for (alarm_clock_id = CLOCK_REALTIME_ALARM;
+ alarm_clock_id <= CLOCK_BOOTTIME_ALARM;
+ alarm_clock_id++) {
+
+ alarmcount = 0;
+ timer_create(alarm_clock_id, &se, &tm1);
+
+ clock_gettime(alarm_clock_id, &start_time);
+ printf("Start time (%s): %ld:%ld\n", clockstring(alarm_clock_id),
+ start_time.tv_sec, start_time.tv_nsec);
+ printf("Setting alarm for every %i seconds\n", SUSPEND_SECS);
+ its1.it_value = start_time;
+ its1.it_value.tv_sec += SUSPEND_SECS;
+ its1.it_interval.tv_sec = SUSPEND_SECS;
+ its1.it_interval.tv_nsec = 0;
+
+ timer_settime(tm1, TIMER_ABSTIME, &its1, &its2);
+
+ while (alarmcount < 5)
+ sleep(1); /* First 5 alarms, do nothing */
+
+ printf("Starting suspend loops\n");
+ while (alarmcount < 10) {
+ int ret;
+
+ sleep(1);
+ ret = system("echo mem > /sys/power/state");
+ if (ret)
+ break;
+ }
+ timer_delete(tm1);
+ }
+ if (final_ret)
+ return ksft_exit_fail();
+ return ksft_exit_pass();
+}
diff --git a/kernel/tools/testing/selftests/timers/change_skew.c b/kernel/tools/testing/selftests/timers/change_skew.c
new file mode 100644
index 000000000..cb1968977
--- /dev/null
+++ b/kernel/tools/testing/selftests/timers/change_skew.c
@@ -0,0 +1,107 @@
+/* ADJ_FREQ Skew change test
+ * by: john stultz (johnstul@us.ibm.com)
+ * (C) Copyright IBM 2012
+ * Licensed under the GPLv2
+ *
+ * NOTE: This is a meta-test which cranks the ADJ_FREQ knob and
+ * then uses other tests to detect problems. Thus this test requires
+ * that the raw_skew, inconsistency-check and nanosleep tests be
+ * present in the same directory it is run from.
+ *
+ * To build:
+ * $ gcc change_skew.c -o change_skew -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <time.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define NSEC_PER_SEC 1000000000LL
+
+
+int change_skew_test(int ppm)
+{
+ struct timex tx;
+ int ret;
+
+ tx.modes = ADJ_FREQUENCY;
+ tx.freq = ppm << 16;
+
+ ret = adjtimex(&tx);
+ if (ret < 0) {
+ printf("Error adjusting freq\n");
+ return ret;
+ }
+
+ ret = system("./raw_skew");
+ ret |= system("./inconsistency-check");
+ ret |= system("./nanosleep");
+
+ return ret;
+}
+
+
+int main(int argv, char **argc)
+{
+ struct timex tx;
+ int i, ret;
+
+ int ppm[5] = {0, 250, 500, -250, -500};
+
+ /* Kill ntpd */
+ ret = system("killall -9 ntpd");
+
+ /* Make sure there's no offset adjustment going on */
+ tx.modes = ADJ_OFFSET;
+ tx.offset = 0;
+ ret = adjtimex(&tx);
+
+ if (ret < 0) {
+ printf("Maybe you're not running as root?\n");
+ return -1;
+ }
+
+ for (i = 0; i < 5; i++) {
+ printf("Using %i ppm adjustment\n", ppm[i]);
+ ret = change_skew_test(ppm[i]);
+ if (ret)
+ break;
+ }
+
+ /* Set things back */
+ tx.modes = ADJ_FREQUENCY;
+ tx.offset = 0;
+ adjtimex(&tx);
+
+ if (ret) {
+ printf("[FAIL]");
+ return ksft_exit_fail();
+ }
+ printf("[OK]");
+ return ksft_exit_pass();
+}
diff --git a/kernel/tools/testing/selftests/timers/clocksource-switch.c b/kernel/tools/testing/selftests/timers/clocksource-switch.c
new file mode 100644
index 000000000..627ec7425
--- /dev/null
+++ b/kernel/tools/testing/selftests/timers/clocksource-switch.c
@@ -0,0 +1,179 @@
+/* Clocksource change test
+ * by: john stultz (johnstul@us.ibm.com)
+ * (C) Copyright IBM 2012
+ * Licensed under the GPLv2
+ *
+ * NOTE: This is a meta-test which quickly changes the clocksourc and
+ * then uses other tests to detect problems. Thus this test requires
+ * that the inconsistency-check and nanosleep tests be present in the
+ * same directory it is run from.
+ *
+ * To build:
+ * $ gcc clocksource-switch.c -o clocksource-switch -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <time.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <string.h>
+#include <sys/wait.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+
+int get_clocksources(char list[][30])
+{
+ int fd, i;
+ size_t size;
+ char buf[512];
+ char *head, *tmp;
+
+ fd = open("/sys/devices/system/clocksource/clocksource0/available_clocksource", O_RDONLY);
+
+ size = read(fd, buf, 512);
+
+ close(fd);
+
+ for (i = 0; i < 30; i++)
+ list[i][0] = '\0';
+
+ head = buf;
+ i = 0;
+ while (head - buf < size) {
+ /* Find the next space */
+ for (tmp = head; *tmp != ' '; tmp++) {
+ if (*tmp == '\n')
+ break;
+ if (*tmp == '\0')
+ break;
+ }
+ *tmp = '\0';
+ strcpy(list[i], head);
+ head = tmp + 1;
+ i++;
+ }
+
+ return i-1;
+}
+
+int get_cur_clocksource(char *buf, size_t size)
+{
+ int fd;
+
+ fd = open("/sys/devices/system/clocksource/clocksource0/current_clocksource", O_RDONLY);
+
+ size = read(fd, buf, size);
+
+ return 0;
+}
+
+int change_clocksource(char *clocksource)
+{
+ int fd;
+ size_t size;
+
+ fd = open("/sys/devices/system/clocksource/clocksource0/current_clocksource", O_WRONLY);
+
+ if (fd < 0)
+ return -1;
+
+ size = write(fd, clocksource, strlen(clocksource));
+
+ if (size < 0)
+ return -1;
+
+ close(fd);
+ return 0;
+}
+
+
+int run_tests(int secs)
+{
+ int ret;
+ char buf[255];
+
+ sprintf(buf, "./inconsistency-check -t %i", secs);
+ ret = system(buf);
+ if (ret)
+ return ret;
+ ret = system("./nanosleep");
+ return ret;
+}
+
+
+char clocksource_list[10][30];
+
+int main(int argv, char **argc)
+{
+ char orig_clk[512];
+ int count, i, status;
+ pid_t pid;
+
+ get_cur_clocksource(orig_clk, 512);
+
+ count = get_clocksources(clocksource_list);
+
+ if (change_clocksource(clocksource_list[0])) {
+ printf("Error: You probably need to run this as root\n");
+ return -1;
+ }
+
+ /* Check everything is sane before we start switching asyncrhonously */
+ for (i = 0; i < count; i++) {
+ printf("Validating clocksource %s\n", clocksource_list[i]);
+ if (change_clocksource(clocksource_list[i])) {
+ status = -1;
+ goto out;
+ }
+ if (run_tests(5)) {
+ status = -1;
+ goto out;
+ }
+ }
+
+
+ printf("Running Asyncrhonous Switching Tests...\n");
+ pid = fork();
+ if (!pid)
+ return run_tests(60);
+
+ while (pid != waitpid(pid, &status, WNOHANG))
+ for (i = 0; i < count; i++)
+ if (change_clocksource(clocksource_list[i])) {
+ status = -1;
+ goto out;
+ }
+out:
+ change_clocksource(orig_clk);
+
+ if (status)
+ return ksft_exit_fail();
+ return ksft_exit_pass();
+}
diff --git a/kernel/tools/testing/selftests/timers/inconsistency-check.c b/kernel/tools/testing/selftests/timers/inconsistency-check.c
new file mode 100644
index 000000000..caf1bc925
--- /dev/null
+++ b/kernel/tools/testing/selftests/timers/inconsistency-check.c
@@ -0,0 +1,204 @@
+/* Time inconsistency check test
+ * by: john stultz (johnstul@us.ibm.com)
+ * (C) Copyright IBM 2003, 2004, 2005, 2012
+ * (C) Copyright Linaro Limited 2015
+ * Licensed under the GPLv2
+ *
+ * To build:
+ * $ gcc inconsistency-check.c -o inconsistency-check -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define CALLS_PER_LOOP 64
+#define NSEC_PER_SEC 1000000000ULL
+
+#define CLOCK_REALTIME 0
+#define CLOCK_MONOTONIC 1
+#define CLOCK_PROCESS_CPUTIME_ID 2
+#define CLOCK_THREAD_CPUTIME_ID 3
+#define CLOCK_MONOTONIC_RAW 4
+#define CLOCK_REALTIME_COARSE 5
+#define CLOCK_MONOTONIC_COARSE 6
+#define CLOCK_BOOTTIME 7
+#define CLOCK_REALTIME_ALARM 8
+#define CLOCK_BOOTTIME_ALARM 9
+#define CLOCK_HWSPECIFIC 10
+#define CLOCK_TAI 11
+#define NR_CLOCKIDS 12
+
+char *clockstring(int clockid)
+{
+ switch (clockid) {
+ case CLOCK_REALTIME:
+ return "CLOCK_REALTIME";
+ case CLOCK_MONOTONIC:
+ return "CLOCK_MONOTONIC";
+ case CLOCK_PROCESS_CPUTIME_ID:
+ return "CLOCK_PROCESS_CPUTIME_ID";
+ case CLOCK_THREAD_CPUTIME_ID:
+ return "CLOCK_THREAD_CPUTIME_ID";
+ case CLOCK_MONOTONIC_RAW:
+ return "CLOCK_MONOTONIC_RAW";
+ case CLOCK_REALTIME_COARSE:
+ return "CLOCK_REALTIME_COARSE";
+ case CLOCK_MONOTONIC_COARSE:
+ return "CLOCK_MONOTONIC_COARSE";
+ case CLOCK_BOOTTIME:
+ return "CLOCK_BOOTTIME";
+ case CLOCK_REALTIME_ALARM:
+ return "CLOCK_REALTIME_ALARM";
+ case CLOCK_BOOTTIME_ALARM:
+ return "CLOCK_BOOTTIME_ALARM";
+ case CLOCK_TAI:
+ return "CLOCK_TAI";
+ };
+ return "UNKNOWN_CLOCKID";
+}
+
+/* returns 1 if a <= b, 0 otherwise */
+static inline int in_order(struct timespec a, struct timespec b)
+{
+ /* use unsigned to avoid false positives on 2038 rollover */
+ if ((unsigned long)a.tv_sec < (unsigned long)b.tv_sec)
+ return 1;
+ if ((unsigned long)a.tv_sec > (unsigned long)b.tv_sec)
+ return 0;
+ if (a.tv_nsec > b.tv_nsec)
+ return 0;
+ return 1;
+}
+
+
+
+int consistency_test(int clock_type, unsigned long seconds)
+{
+ struct timespec list[CALLS_PER_LOOP];
+ int i, inconsistent;
+ long now, then;
+ time_t t;
+ char *start_str;
+
+ clock_gettime(clock_type, &list[0]);
+ now = then = list[0].tv_sec;
+
+ /* timestamp start of test */
+ t = time(0);
+ start_str = ctime(&t);
+
+ while (seconds == -1 || now - then < seconds) {
+ inconsistent = 0;
+
+ /* Fill list */
+ for (i = 0; i < CALLS_PER_LOOP; i++)
+ clock_gettime(clock_type, &list[i]);
+
+ /* Check for inconsistencies */
+ for (i = 0; i < CALLS_PER_LOOP - 1; i++)
+ if (!in_order(list[i], list[i+1]))
+ inconsistent = i;
+
+ /* display inconsistency */
+ if (inconsistent) {
+ unsigned long long delta;
+
+ printf("\%s\n", start_str);
+ for (i = 0; i < CALLS_PER_LOOP; i++) {
+ if (i == inconsistent)
+ printf("--------------------\n");
+ printf("%lu:%lu\n", list[i].tv_sec,
+ list[i].tv_nsec);
+ if (i == inconsistent + 1)
+ printf("--------------------\n");
+ }
+ delta = list[inconsistent].tv_sec * NSEC_PER_SEC;
+ delta += list[inconsistent].tv_nsec;
+ delta -= list[inconsistent+1].tv_sec * NSEC_PER_SEC;
+ delta -= list[inconsistent+1].tv_nsec;
+ printf("Delta: %llu ns\n", delta);
+ fflush(0);
+ /* timestamp inconsistency*/
+ t = time(0);
+ printf("%s\n", ctime(&t));
+ printf("[FAILED]\n");
+ return -1;
+ }
+ now = list[0].tv_sec;
+ }
+ printf("[OK]\n");
+ return 0;
+}
+
+
+int main(int argc, char *argv[])
+{
+ int clockid, opt;
+ int userclock = CLOCK_REALTIME;
+ int maxclocks = NR_CLOCKIDS;
+ int runtime = 10;
+ struct timespec ts;
+
+ /* Process arguments */
+ while ((opt = getopt(argc, argv, "t:c:")) != -1) {
+ switch (opt) {
+ case 't':
+ runtime = atoi(optarg);
+ break;
+ case 'c':
+ userclock = atoi(optarg);
+ maxclocks = userclock + 1;
+ break;
+ default:
+ printf("Usage: %s [-t <secs>] [-c <clockid>]\n", argv[0]);
+ printf(" -t: Number of seconds to run\n");
+ printf(" -c: clockid to use (default, all clockids)\n");
+ exit(-1);
+ }
+ }
+
+ setbuf(stdout, NULL);
+
+ for (clockid = userclock; clockid < maxclocks; clockid++) {
+
+ if (clockid == CLOCK_HWSPECIFIC)
+ continue;
+
+ if (!clock_gettime(clockid, &ts)) {
+ printf("Consistent %-30s ", clockstring(clockid));
+ if (consistency_test(clockid, runtime))
+ return ksft_exit_fail();
+ }
+ }
+ return ksft_exit_pass();
+}
diff --git a/kernel/tools/testing/selftests/timers/leap-a-day.c b/kernel/tools/testing/selftests/timers/leap-a-day.c
new file mode 100644
index 000000000..b8272e6c4
--- /dev/null
+++ b/kernel/tools/testing/selftests/timers/leap-a-day.c
@@ -0,0 +1,319 @@
+/* Leap second stress test
+ * by: John Stultz (john.stultz@linaro.org)
+ * (C) Copyright IBM 2012
+ * (C) Copyright 2013, 2015 Linaro Limited
+ * Licensed under the GPLv2
+ *
+ * This test signals the kernel to insert a leap second
+ * every day at midnight GMT. This allows for stessing the
+ * kernel's leap-second behavior, as well as how well applications
+ * handle the leap-second discontinuity.
+ *
+ * Usage: leap-a-day [-s] [-i <num>]
+ *
+ * Options:
+ * -s: Each iteration, set the date to 10 seconds before midnight GMT.
+ * This speeds up the number of leapsecond transitions tested,
+ * but because it calls settimeofday frequently, advancing the
+ * time by 24 hours every ~16 seconds, it may cause application
+ * disruption.
+ *
+ * -i: Number of iterations to run (default: infinite)
+ *
+ * Other notes: Disabling NTP prior to running this is advised, as the two
+ * may conflict in their commands to the kernel.
+ *
+ * To build:
+ * $ gcc leap-a-day.c -o leap-a-day -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#include <unistd.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define NSEC_PER_SEC 1000000000ULL
+#define CLOCK_TAI 11
+
+/* returns 1 if a <= b, 0 otherwise */
+static inline int in_order(struct timespec a, struct timespec b)
+{
+ if (a.tv_sec < b.tv_sec)
+ return 1;
+ if (a.tv_sec > b.tv_sec)
+ return 0;
+ if (a.tv_nsec > b.tv_nsec)
+ return 0;
+ return 1;
+}
+
+struct timespec timespec_add(struct timespec ts, unsigned long long ns)
+{
+ ts.tv_nsec += ns;
+ while (ts.tv_nsec >= NSEC_PER_SEC) {
+ ts.tv_nsec -= NSEC_PER_SEC;
+ ts.tv_sec++;
+ }
+ return ts;
+}
+
+char *time_state_str(int state)
+{
+ switch (state) {
+ case TIME_OK: return "TIME_OK";
+ case TIME_INS: return "TIME_INS";
+ case TIME_DEL: return "TIME_DEL";
+ case TIME_OOP: return "TIME_OOP";
+ case TIME_WAIT: return "TIME_WAIT";
+ case TIME_BAD: return "TIME_BAD";
+ }
+ return "ERROR";
+}
+
+/* clear NTP time_status & time_state */
+int clear_time_state(void)
+{
+ struct timex tx;
+ int ret;
+
+ /*
+ * We have to call adjtime twice here, as kernels
+ * prior to 6b1859dba01c7 (included in 3.5 and
+ * -stable), had an issue with the state machine
+ * and wouldn't clear the STA_INS/DEL flag directly.
+ */
+ tx.modes = ADJ_STATUS;
+ tx.status = STA_PLL;
+ ret = adjtimex(&tx);
+
+ /* Clear maxerror, as it can cause UNSYNC to be set */
+ tx.modes = ADJ_MAXERROR;
+ tx.maxerror = 0;
+ ret = adjtimex(&tx);
+
+ /* Clear the status */
+ tx.modes = ADJ_STATUS;
+ tx.status = 0;
+ ret = adjtimex(&tx);
+
+ return ret;
+}
+
+/* Make sure we cleanup on ctrl-c */
+void handler(int unused)
+{
+ clear_time_state();
+ exit(0);
+}
+
+/* Test for known hrtimer failure */
+void test_hrtimer_failure(void)
+{
+ struct timespec now, target;
+
+ clock_gettime(CLOCK_REALTIME, &now);
+ target = timespec_add(now, NSEC_PER_SEC/2);
+ clock_nanosleep(CLOCK_REALTIME, TIMER_ABSTIME, &target, NULL);
+ clock_gettime(CLOCK_REALTIME, &now);
+
+ if (!in_order(target, now))
+ printf("ERROR: hrtimer early expiration failure observed.\n");
+}
+
+int main(int argc, char **argv)
+{
+ int settime = 0;
+ int tai_time = 0;
+ int insert = 1;
+ int iterations = -1;
+ int opt;
+
+ /* Process arguments */
+ while ((opt = getopt(argc, argv, "sti:")) != -1) {
+ switch (opt) {
+ case 's':
+ printf("Setting time to speed up testing\n");
+ settime = 1;
+ break;
+ case 'i':
+ iterations = atoi(optarg);
+ break;
+ case 't':
+ tai_time = 1;
+ break;
+ default:
+ printf("Usage: %s [-s] [-i <iterations>]\n", argv[0]);
+ printf(" -s: Set time to right before leap second each iteration\n");
+ printf(" -i: Number of iterations\n");
+ printf(" -t: Print TAI time\n");
+ exit(-1);
+ }
+ }
+
+ /* Make sure TAI support is present if -t was used */
+ if (tai_time) {
+ struct timespec ts;
+
+ if (clock_gettime(CLOCK_TAI, &ts)) {
+ printf("System doesn't support CLOCK_TAI\n");
+ ksft_exit_fail();
+ }
+ }
+
+ signal(SIGINT, handler);
+ signal(SIGKILL, handler);
+
+ if (iterations < 0)
+ printf("This runs continuously. Press ctrl-c to stop\n");
+ else
+ printf("Running for %i iterations. Press ctrl-c to stop\n", iterations);
+
+ printf("\n");
+ while (1) {
+ int ret;
+ struct timespec ts;
+ struct timex tx;
+ time_t now, next_leap;
+
+ /* Get the current time */
+ clock_gettime(CLOCK_REALTIME, &ts);
+
+ /* Calculate the next possible leap second 23:59:60 GMT */
+ next_leap = ts.tv_sec;
+ next_leap += 86400 - (next_leap % 86400);
+
+ if (settime) {
+ struct timeval tv;
+
+ tv.tv_sec = next_leap - 10;
+ tv.tv_usec = 0;
+ settimeofday(&tv, NULL);
+ printf("Setting time to %s", ctime(&tv.tv_sec));
+ }
+
+ /* Reset NTP time state */
+ clear_time_state();
+
+ /* Set the leap second insert flag */
+ tx.modes = ADJ_STATUS;
+ if (insert)
+ tx.status = STA_INS;
+ else
+ tx.status = STA_DEL;
+ ret = adjtimex(&tx);
+ if (ret < 0) {
+ printf("Error: Problem setting STA_INS/STA_DEL!: %s\n",
+ time_state_str(ret));
+ return ksft_exit_fail();
+ }
+
+ /* Validate STA_INS was set */
+ tx.modes = 0;
+ ret = adjtimex(&tx);
+ if (tx.status != STA_INS && tx.status != STA_DEL) {
+ printf("Error: STA_INS/STA_DEL not set!: %s\n",
+ time_state_str(ret));
+ return ksft_exit_fail();
+ }
+
+ if (tai_time) {
+ printf("Using TAI time,"
+ " no inconsistencies should be seen!\n");
+ }
+
+ printf("Scheduling leap second for %s", ctime(&next_leap));
+
+ /* Wake up 3 seconds before leap */
+ ts.tv_sec = next_leap - 3;
+ ts.tv_nsec = 0;
+
+ while (clock_nanosleep(CLOCK_REALTIME, TIMER_ABSTIME, &ts, NULL))
+ printf("Something woke us up, returning to sleep\n");
+
+ /* Validate STA_INS is still set */
+ tx.modes = 0;
+ ret = adjtimex(&tx);
+ if (tx.status != STA_INS && tx.status != STA_DEL) {
+ printf("Something cleared STA_INS/STA_DEL, setting it again.\n");
+ tx.modes = ADJ_STATUS;
+ if (insert)
+ tx.status = STA_INS;
+ else
+ tx.status = STA_DEL;
+ ret = adjtimex(&tx);
+ }
+
+ /* Check adjtimex output every half second */
+ now = tx.time.tv_sec;
+ while (now < next_leap + 2) {
+ char buf[26];
+ struct timespec tai;
+
+ tx.modes = 0;
+ ret = adjtimex(&tx);
+
+ if (tai_time) {
+ clock_gettime(CLOCK_TAI, &tai);
+ printf("%ld sec, %9ld ns\t%s\n",
+ tai.tv_sec,
+ tai.tv_nsec,
+ time_state_str(ret));
+ } else {
+ ctime_r(&tx.time.tv_sec, buf);
+ buf[strlen(buf)-1] = 0; /*remove trailing\n */
+
+ printf("%s + %6ld us (%i)\t%s\n",
+ buf,
+ tx.time.tv_usec,
+ tx.tai,
+ time_state_str(ret));
+ }
+ now = tx.time.tv_sec;
+ /* Sleep for another half second */
+ ts.tv_sec = 0;
+ ts.tv_nsec = NSEC_PER_SEC / 2;
+ clock_nanosleep(CLOCK_MONOTONIC, 0, &ts, NULL);
+ }
+ /* Switch to using other mode */
+ insert = !insert;
+
+ /* Note if kernel has known hrtimer failure */
+ test_hrtimer_failure();
+
+ printf("Leap complete\n\n");
+
+ if ((iterations != -1) && !(--iterations))
+ break;
+ }
+
+ clear_time_state();
+ return ksft_exit_pass();
+}
diff --git a/kernel/tools/testing/selftests/timers/leapcrash.c b/kernel/tools/testing/selftests/timers/leapcrash.c
new file mode 100644
index 000000000..a1071bdbd
--- /dev/null
+++ b/kernel/tools/testing/selftests/timers/leapcrash.c
@@ -0,0 +1,120 @@
+/* Demo leapsecond deadlock
+ * by: John Stultz (john.stultz@linaro.org)
+ * (C) Copyright IBM 2012
+ * (C) Copyright 2013, 2015 Linaro Limited
+ * Licensed under the GPL
+ *
+ * This test demonstrates leapsecond deadlock that is possibe
+ * on kernels from 2.6.26 to 3.3.
+ *
+ * WARNING: THIS WILL LIKELY HARDHANG SYSTEMS AND MAY LOSE DATA
+ * RUN AT YOUR OWN RISK!
+ * To build:
+ * $ gcc leapcrash.c -o leapcrash -lrt
+ */
+
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+
+
+/* clear NTP time_status & time_state */
+int clear_time_state(void)
+{
+ struct timex tx;
+ int ret;
+
+ /*
+ * We have to call adjtime twice here, as kernels
+ * prior to 6b1859dba01c7 (included in 3.5 and
+ * -stable), had an issue with the state machine
+ * and wouldn't clear the STA_INS/DEL flag directly.
+ */
+ tx.modes = ADJ_STATUS;
+ tx.status = STA_PLL;
+ ret = adjtimex(&tx);
+
+ tx.modes = ADJ_STATUS;
+ tx.status = 0;
+ ret = adjtimex(&tx);
+
+ return ret;
+}
+
+/* Make sure we cleanup on ctrl-c */
+void handler(int unused)
+{
+ clear_time_state();
+ exit(0);
+}
+
+
+int main(void)
+{
+ struct timex tx;
+ struct timespec ts;
+ time_t next_leap;
+ int count = 0;
+
+ setbuf(stdout, NULL);
+
+ signal(SIGINT, handler);
+ signal(SIGKILL, handler);
+ printf("This runs for a few minutes. Press ctrl-c to stop\n");
+
+ clear_time_state();
+
+
+ /* Get the current time */
+ clock_gettime(CLOCK_REALTIME, &ts);
+
+ /* Calculate the next possible leap second 23:59:60 GMT */
+ next_leap = ts.tv_sec;
+ next_leap += 86400 - (next_leap % 86400);
+
+ for (count = 0; count < 20; count++) {
+ struct timeval tv;
+
+
+ /* set the time to 2 seconds before the leap */
+ tv.tv_sec = next_leap - 2;
+ tv.tv_usec = 0;
+ if (settimeofday(&tv, NULL)) {
+ printf("Error: You're likely not running with proper (ie: root) permissions\n");
+ return ksft_exit_fail();
+ }
+ tx.modes = 0;
+ adjtimex(&tx);
+
+ /* hammer on adjtime w/ STA_INS */
+ while (tx.time.tv_sec < next_leap + 1) {
+ /* Set the leap second insert flag */
+ tx.modes = ADJ_STATUS;
+ tx.status = STA_INS;
+ adjtimex(&tx);
+ }
+ clear_time_state();
+ printf(".");
+ }
+ printf("[OK]\n");
+ return ksft_exit_pass();
+}
diff --git a/kernel/tools/testing/selftests/timers/mqueue-lat.c b/kernel/tools/testing/selftests/timers/mqueue-lat.c
new file mode 100644
index 000000000..a2a3924d0
--- /dev/null
+++ b/kernel/tools/testing/selftests/timers/mqueue-lat.c
@@ -0,0 +1,124 @@
+/* Measure mqueue timeout latency
+ * by: john stultz (john.stultz@linaro.org)
+ * (C) Copyright Linaro 2013
+ *
+ * Inspired with permission from example test by:
+ * Romain Francoise <romain@orebokech.com>
+ * Licensed under the GPLv2
+ *
+ * To build:
+ * $ gcc mqueue-lat.c -o mqueue-lat -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#include <errno.h>
+#include <mqueue.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define NSEC_PER_SEC 1000000000ULL
+
+#define TARGET_TIMEOUT 100000000 /* 100ms in nanoseconds */
+#define UNRESONABLE_LATENCY 40000000 /* 40ms in nanosecs */
+
+
+long long timespec_sub(struct timespec a, struct timespec b)
+{
+ long long ret = NSEC_PER_SEC * b.tv_sec + b.tv_nsec;
+
+ ret -= NSEC_PER_SEC * a.tv_sec + a.tv_nsec;
+ return ret;
+}
+
+struct timespec timespec_add(struct timespec ts, unsigned long long ns)
+{
+ ts.tv_nsec += ns;
+ while (ts.tv_nsec >= NSEC_PER_SEC) {
+ ts.tv_nsec -= NSEC_PER_SEC;
+ ts.tv_sec++;
+ }
+ return ts;
+}
+
+int mqueue_lat_test(void)
+{
+
+ mqd_t q;
+ struct mq_attr attr;
+ struct timespec start, end, now, target;
+ int i, count, ret;
+
+ q = mq_open("/foo", O_CREAT | O_RDONLY, 0666, NULL);
+ if (q < 0) {
+ perror("mq_open");
+ return -1;
+ }
+ mq_getattr(q, &attr);
+
+
+ count = 100;
+ clock_gettime(CLOCK_MONOTONIC, &start);
+
+ for (i = 0; i < count; i++) {
+ char buf[attr.mq_msgsize];
+
+ clock_gettime(CLOCK_REALTIME, &now);
+ target = now;
+ target = timespec_add(now, TARGET_TIMEOUT); /* 100ms */
+
+ ret = mq_timedreceive(q, buf, sizeof(buf), NULL, &target);
+ if (ret < 0 && errno != ETIMEDOUT) {
+ perror("mq_timedreceive");
+ return -1;
+ }
+ }
+ clock_gettime(CLOCK_MONOTONIC, &end);
+
+ mq_close(q);
+
+ if ((timespec_sub(start, end)/count) > TARGET_TIMEOUT + UNRESONABLE_LATENCY)
+ return -1;
+
+ return 0;
+}
+
+int main(int argc, char **argv)
+{
+ int ret;
+
+ printf("Mqueue latency : ");
+
+ ret = mqueue_lat_test();
+ if (ret < 0) {
+ printf("[FAILED]\n");
+ return ksft_exit_fail();
+ }
+ printf("[OK]\n");
+ return ksft_exit_pass();
+}
diff --git a/kernel/tools/testing/selftests/timers/nanosleep.c b/kernel/tools/testing/selftests/timers/nanosleep.c
new file mode 100644
index 000000000..8a3c29de7
--- /dev/null
+++ b/kernel/tools/testing/selftests/timers/nanosleep.c
@@ -0,0 +1,174 @@
+/* Make sure timers don't return early
+ * by: john stultz (johnstul@us.ibm.com)
+ * John Stultz (john.stultz@linaro.org)
+ * (C) Copyright IBM 2012
+ * (C) Copyright Linaro 2013 2015
+ * Licensed under the GPLv2
+ *
+ * To build:
+ * $ gcc nanosleep.c -o nanosleep -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define NSEC_PER_SEC 1000000000ULL
+
+#define CLOCK_REALTIME 0
+#define CLOCK_MONOTONIC 1
+#define CLOCK_PROCESS_CPUTIME_ID 2
+#define CLOCK_THREAD_CPUTIME_ID 3
+#define CLOCK_MONOTONIC_RAW 4
+#define CLOCK_REALTIME_COARSE 5
+#define CLOCK_MONOTONIC_COARSE 6
+#define CLOCK_BOOTTIME 7
+#define CLOCK_REALTIME_ALARM 8
+#define CLOCK_BOOTTIME_ALARM 9
+#define CLOCK_HWSPECIFIC 10
+#define CLOCK_TAI 11
+#define NR_CLOCKIDS 12
+
+#define UNSUPPORTED 0xf00f
+
+char *clockstring(int clockid)
+{
+ switch (clockid) {
+ case CLOCK_REALTIME:
+ return "CLOCK_REALTIME";
+ case CLOCK_MONOTONIC:
+ return "CLOCK_MONOTONIC";
+ case CLOCK_PROCESS_CPUTIME_ID:
+ return "CLOCK_PROCESS_CPUTIME_ID";
+ case CLOCK_THREAD_CPUTIME_ID:
+ return "CLOCK_THREAD_CPUTIME_ID";
+ case CLOCK_MONOTONIC_RAW:
+ return "CLOCK_MONOTONIC_RAW";
+ case CLOCK_REALTIME_COARSE:
+ return "CLOCK_REALTIME_COARSE";
+ case CLOCK_MONOTONIC_COARSE:
+ return "CLOCK_MONOTONIC_COARSE";
+ case CLOCK_BOOTTIME:
+ return "CLOCK_BOOTTIME";
+ case CLOCK_REALTIME_ALARM:
+ return "CLOCK_REALTIME_ALARM";
+ case CLOCK_BOOTTIME_ALARM:
+ return "CLOCK_BOOTTIME_ALARM";
+ case CLOCK_TAI:
+ return "CLOCK_TAI";
+ };
+ return "UNKNOWN_CLOCKID";
+}
+
+/* returns 1 if a <= b, 0 otherwise */
+static inline int in_order(struct timespec a, struct timespec b)
+{
+ if (a.tv_sec < b.tv_sec)
+ return 1;
+ if (a.tv_sec > b.tv_sec)
+ return 0;
+ if (a.tv_nsec > b.tv_nsec)
+ return 0;
+ return 1;
+}
+
+struct timespec timespec_add(struct timespec ts, unsigned long long ns)
+{
+ ts.tv_nsec += ns;
+ while (ts.tv_nsec >= NSEC_PER_SEC) {
+ ts.tv_nsec -= NSEC_PER_SEC;
+ ts.tv_sec++;
+ }
+ return ts;
+}
+
+int nanosleep_test(int clockid, long long ns)
+{
+ struct timespec now, target, rel;
+
+ /* First check abs time */
+ if (clock_gettime(clockid, &now))
+ return UNSUPPORTED;
+ target = timespec_add(now, ns);
+
+ if (clock_nanosleep(clockid, TIMER_ABSTIME, &target, NULL))
+ return UNSUPPORTED;
+ clock_gettime(clockid, &now);
+
+ if (!in_order(target, now))
+ return -1;
+
+ /* Second check reltime */
+ clock_gettime(clockid, &now);
+ rel.tv_sec = 0;
+ rel.tv_nsec = 0;
+ rel = timespec_add(rel, ns);
+ target = timespec_add(now, ns);
+ clock_nanosleep(clockid, 0, &rel, NULL);
+ clock_gettime(clockid, &now);
+
+ if (!in_order(target, now))
+ return -1;
+ return 0;
+}
+
+int main(int argc, char **argv)
+{
+ long long length;
+ int clockid, ret;
+
+ for (clockid = CLOCK_REALTIME; clockid < NR_CLOCKIDS; clockid++) {
+
+ /* Skip cputime clockids since nanosleep won't increment cputime */
+ if (clockid == CLOCK_PROCESS_CPUTIME_ID ||
+ clockid == CLOCK_THREAD_CPUTIME_ID ||
+ clockid == CLOCK_HWSPECIFIC)
+ continue;
+
+ printf("Nanosleep %-31s ", clockstring(clockid));
+
+ length = 10;
+ while (length <= (NSEC_PER_SEC * 10)) {
+ ret = nanosleep_test(clockid, length);
+ if (ret == UNSUPPORTED) {
+ printf("[UNSUPPORTED]\n");
+ goto next;
+ }
+ if (ret < 0) {
+ printf("[FAILED]\n");
+ return ksft_exit_fail();
+ }
+ length *= 100;
+ }
+ printf("[OK]\n");
+next:
+ ret = 0;
+ }
+ return ksft_exit_pass();
+}
diff --git a/kernel/tools/testing/selftests/timers/nsleep-lat.c b/kernel/tools/testing/selftests/timers/nsleep-lat.c
new file mode 100644
index 000000000..2d7898fda
--- /dev/null
+++ b/kernel/tools/testing/selftests/timers/nsleep-lat.c
@@ -0,0 +1,190 @@
+/* Measure nanosleep timer latency
+ * by: john stultz (john.stultz@linaro.org)
+ * (C) Copyright Linaro 2013
+ * Licensed under the GPLv2
+ *
+ * To build:
+ * $ gcc nsleep-lat.c -o nsleep-lat -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define NSEC_PER_SEC 1000000000ULL
+
+#define UNRESONABLE_LATENCY 40000000 /* 40ms in nanosecs */
+
+
+#define CLOCK_REALTIME 0
+#define CLOCK_MONOTONIC 1
+#define CLOCK_PROCESS_CPUTIME_ID 2
+#define CLOCK_THREAD_CPUTIME_ID 3
+#define CLOCK_MONOTONIC_RAW 4
+#define CLOCK_REALTIME_COARSE 5
+#define CLOCK_MONOTONIC_COARSE 6
+#define CLOCK_BOOTTIME 7
+#define CLOCK_REALTIME_ALARM 8
+#define CLOCK_BOOTTIME_ALARM 9
+#define CLOCK_HWSPECIFIC 10
+#define CLOCK_TAI 11
+#define NR_CLOCKIDS 12
+
+#define UNSUPPORTED 0xf00f
+
+char *clockstring(int clockid)
+{
+ switch (clockid) {
+ case CLOCK_REALTIME:
+ return "CLOCK_REALTIME";
+ case CLOCK_MONOTONIC:
+ return "CLOCK_MONOTONIC";
+ case CLOCK_PROCESS_CPUTIME_ID:
+ return "CLOCK_PROCESS_CPUTIME_ID";
+ case CLOCK_THREAD_CPUTIME_ID:
+ return "CLOCK_THREAD_CPUTIME_ID";
+ case CLOCK_MONOTONIC_RAW:
+ return "CLOCK_MONOTONIC_RAW";
+ case CLOCK_REALTIME_COARSE:
+ return "CLOCK_REALTIME_COARSE";
+ case CLOCK_MONOTONIC_COARSE:
+ return "CLOCK_MONOTONIC_COARSE";
+ case CLOCK_BOOTTIME:
+ return "CLOCK_BOOTTIME";
+ case CLOCK_REALTIME_ALARM:
+ return "CLOCK_REALTIME_ALARM";
+ case CLOCK_BOOTTIME_ALARM:
+ return "CLOCK_BOOTTIME_ALARM";
+ case CLOCK_TAI:
+ return "CLOCK_TAI";
+ };
+ return "UNKNOWN_CLOCKID";
+}
+
+struct timespec timespec_add(struct timespec ts, unsigned long long ns)
+{
+ ts.tv_nsec += ns;
+ while (ts.tv_nsec >= NSEC_PER_SEC) {
+ ts.tv_nsec -= NSEC_PER_SEC;
+ ts.tv_sec++;
+ }
+ return ts;
+}
+
+
+long long timespec_sub(struct timespec a, struct timespec b)
+{
+ long long ret = NSEC_PER_SEC * b.tv_sec + b.tv_nsec;
+
+ ret -= NSEC_PER_SEC * a.tv_sec + a.tv_nsec;
+ return ret;
+}
+
+int nanosleep_lat_test(int clockid, long long ns)
+{
+ struct timespec start, end, target;
+ long long latency = 0;
+ int i, count;
+
+ target.tv_sec = ns/NSEC_PER_SEC;
+ target.tv_nsec = ns%NSEC_PER_SEC;
+
+ if (clock_gettime(clockid, &start))
+ return UNSUPPORTED;
+ if (clock_nanosleep(clockid, 0, &target, NULL))
+ return UNSUPPORTED;
+
+ count = 10;
+
+ /* First check relative latency */
+ clock_gettime(clockid, &start);
+ for (i = 0; i < count; i++)
+ clock_nanosleep(clockid, 0, &target, NULL);
+ clock_gettime(clockid, &end);
+
+ if (((timespec_sub(start, end)/count)-ns) > UNRESONABLE_LATENCY) {
+ printf("Large rel latency: %lld ns :", (timespec_sub(start, end)/count)-ns);
+ return -1;
+ }
+
+ /* Next check absolute latency */
+ for (i = 0; i < count; i++) {
+ clock_gettime(clockid, &start);
+ target = timespec_add(start, ns);
+ clock_nanosleep(clockid, TIMER_ABSTIME, &target, NULL);
+ clock_gettime(clockid, &end);
+ latency += timespec_sub(target, end);
+ }
+
+ if (latency/count > UNRESONABLE_LATENCY) {
+ printf("Large abs latency: %lld ns :", latency/count);
+ return -1;
+ }
+
+ return 0;
+}
+
+
+
+int main(int argc, char **argv)
+{
+ long long length;
+ int clockid, ret;
+
+ for (clockid = CLOCK_REALTIME; clockid < NR_CLOCKIDS; clockid++) {
+
+ /* Skip cputime clockids since nanosleep won't increment cputime */
+ if (clockid == CLOCK_PROCESS_CPUTIME_ID ||
+ clockid == CLOCK_THREAD_CPUTIME_ID ||
+ clockid == CLOCK_HWSPECIFIC)
+ continue;
+
+ printf("nsleep latency %-26s ", clockstring(clockid));
+
+ length = 10;
+ while (length <= (NSEC_PER_SEC * 10)) {
+ ret = nanosleep_lat_test(clockid, length);
+ if (ret)
+ break;
+ length *= 100;
+
+ }
+
+ if (ret == UNSUPPORTED) {
+ printf("[UNSUPPORTED]\n");
+ continue;
+ }
+ if (ret < 0) {
+ printf("[FAILED]\n");
+ return ksft_exit_fail();
+ }
+ printf("[OK]\n");
+ }
+ return ksft_exit_pass();
+}
diff --git a/kernel/tools/testing/selftests/timers/posix_timers.c b/kernel/tools/testing/selftests/timers/posix_timers.c
new file mode 100644
index 000000000..5a246a02d
--- /dev/null
+++ b/kernel/tools/testing/selftests/timers/posix_timers.c
@@ -0,0 +1,222 @@
+/*
+ * Copyright (C) 2013 Red Hat, Inc., Frederic Weisbecker <fweisbec@redhat.com>
+ *
+ * Licensed under the terms of the GNU GPL License version 2
+ *
+ * Selftests for a few posix timers interface.
+ *
+ * Kernel loop code stolen from Steven Rostedt <srostedt@redhat.com>
+ */
+
+#include <sys/time.h>
+#include <stdio.h>
+#include <signal.h>
+#include <unistd.h>
+#include <time.h>
+#include <pthread.h>
+
+#include "../kselftest.h"
+
+#define DELAY 2
+#define USECS_PER_SEC 1000000
+
+static volatile int done;
+
+/* Busy loop in userspace to elapse ITIMER_VIRTUAL */
+static void user_loop(void)
+{
+ while (!done);
+}
+
+/*
+ * Try to spend as much time as possible in kernelspace
+ * to elapse ITIMER_PROF.
+ */
+static void kernel_loop(void)
+{
+ void *addr = sbrk(0);
+ int err = 0;
+
+ while (!done && !err) {
+ err = brk(addr + 4096);
+ err |= brk(addr);
+ }
+}
+
+/*
+ * Sleep until ITIMER_REAL expiration.
+ */
+static void idle_loop(void)
+{
+ pause();
+}
+
+static void sig_handler(int nr)
+{
+ done = 1;
+}
+
+/*
+ * Check the expected timer expiration matches the GTOD elapsed delta since
+ * we armed the timer. Keep a 0.5 sec error margin due to various jitter.
+ */
+static int check_diff(struct timeval start, struct timeval end)
+{
+ long long diff;
+
+ diff = end.tv_usec - start.tv_usec;
+ diff += (end.tv_sec - start.tv_sec) * USECS_PER_SEC;
+
+ if (abs(diff - DELAY * USECS_PER_SEC) > USECS_PER_SEC / 2) {
+ printf("Diff too high: %lld..", diff);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int check_itimer(int which)
+{
+ int err;
+ struct timeval start, end;
+ struct itimerval val = {
+ .it_value.tv_sec = DELAY,
+ };
+
+ printf("Check itimer ");
+
+ if (which == ITIMER_VIRTUAL)
+ printf("virtual... ");
+ else if (which == ITIMER_PROF)
+ printf("prof... ");
+ else if (which == ITIMER_REAL)
+ printf("real... ");
+
+ fflush(stdout);
+
+ done = 0;
+
+ if (which == ITIMER_VIRTUAL)
+ signal(SIGVTALRM, sig_handler);
+ else if (which == ITIMER_PROF)
+ signal(SIGPROF, sig_handler);
+ else if (which == ITIMER_REAL)
+ signal(SIGALRM, sig_handler);
+
+ err = gettimeofday(&start, NULL);
+ if (err < 0) {
+ perror("Can't call gettimeofday()\n");
+ return -1;
+ }
+
+ err = setitimer(which, &val, NULL);
+ if (err < 0) {
+ perror("Can't set timer\n");
+ return -1;
+ }
+
+ if (which == ITIMER_VIRTUAL)
+ user_loop();
+ else if (which == ITIMER_PROF)
+ kernel_loop();
+ else if (which == ITIMER_REAL)
+ idle_loop();
+
+ gettimeofday(&end, NULL);
+ if (err < 0) {
+ perror("Can't call gettimeofday()\n");
+ return -1;
+ }
+
+ if (!check_diff(start, end))
+ printf("[OK]\n");
+ else
+ printf("[FAIL]\n");
+
+ return 0;
+}
+
+static int check_timer_create(int which)
+{
+ int err;
+ timer_t id;
+ struct timeval start, end;
+ struct itimerspec val = {
+ .it_value.tv_sec = DELAY,
+ };
+
+ printf("Check timer_create() ");
+ if (which == CLOCK_THREAD_CPUTIME_ID) {
+ printf("per thread... ");
+ } else if (which == CLOCK_PROCESS_CPUTIME_ID) {
+ printf("per process... ");
+ }
+ fflush(stdout);
+
+ done = 0;
+ err = timer_create(which, NULL, &id);
+ if (err < 0) {
+ perror("Can't create timer\n");
+ return -1;
+ }
+ signal(SIGALRM, sig_handler);
+
+ err = gettimeofday(&start, NULL);
+ if (err < 0) {
+ perror("Can't call gettimeofday()\n");
+ return -1;
+ }
+
+ err = timer_settime(id, 0, &val, NULL);
+ if (err < 0) {
+ perror("Can't set timer\n");
+ return -1;
+ }
+
+ user_loop();
+
+ gettimeofday(&end, NULL);
+ if (err < 0) {
+ perror("Can't call gettimeofday()\n");
+ return -1;
+ }
+
+ if (!check_diff(start, end))
+ printf("[OK]\n");
+ else
+ printf("[FAIL]\n");
+
+ return 0;
+}
+
+int main(int argc, char **argv)
+{
+ printf("Testing posix timers. False negative may happen on CPU execution \n");
+ printf("based timers if other threads run on the CPU...\n");
+
+ if (check_itimer(ITIMER_VIRTUAL) < 0)
+ return ksft_exit_fail();
+
+ if (check_itimer(ITIMER_PROF) < 0)
+ return ksft_exit_fail();
+
+ if (check_itimer(ITIMER_REAL) < 0)
+ return ksft_exit_fail();
+
+ if (check_timer_create(CLOCK_THREAD_CPUTIME_ID) < 0)
+ return ksft_exit_fail();
+
+ /*
+ * It's unfortunately hard to reliably test a timer expiration
+ * on parallel multithread cputime. We could arm it to expire
+ * on DELAY * nr_threads, with nr_threads busy looping, then wait
+ * the normal DELAY since the time is elapsing nr_threads faster.
+ * But for that we need to ensure we have real physical free CPUs
+ * to ensure true parallelism. So test only one thread until we
+ * find a better solution.
+ */
+ if (check_timer_create(CLOCK_PROCESS_CPUTIME_ID) < 0)
+ return ksft_exit_fail();
+
+ return ksft_exit_pass();
+}
diff --git a/kernel/tools/testing/selftests/timers/raw_skew.c b/kernel/tools/testing/selftests/timers/raw_skew.c
new file mode 100644
index 000000000..30906bfd9
--- /dev/null
+++ b/kernel/tools/testing/selftests/timers/raw_skew.c
@@ -0,0 +1,154 @@
+/* CLOCK_MONOTONIC vs CLOCK_MONOTONIC_RAW skew test
+ * by: john stultz (johnstul@us.ibm.com)
+ * John Stultz <john.stultz@linaro.org>
+ * (C) Copyright IBM 2012
+ * (C) Copyright Linaro Limited 2015
+ * Licensed under the GPLv2
+ *
+ * To build:
+ * $ gcc raw_skew.c -o raw_skew -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <time.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+
+#define CLOCK_MONOTONIC_RAW 4
+#define NSEC_PER_SEC 1000000000LL
+
+#define shift_right(x, s) ({ \
+ __typeof__(x) __x = (x); \
+ __typeof__(s) __s = (s); \
+ __x < 0 ? -(-__x >> __s) : __x >> __s; \
+})
+
+long long llabs(long long val)
+{
+ if (val < 0)
+ val = -val;
+ return val;
+}
+
+unsigned long long ts_to_nsec(struct timespec ts)
+{
+ return ts.tv_sec * NSEC_PER_SEC + ts.tv_nsec;
+}
+
+struct timespec nsec_to_ts(long long ns)
+{
+ struct timespec ts;
+
+ ts.tv_sec = ns/NSEC_PER_SEC;
+ ts.tv_nsec = ns%NSEC_PER_SEC;
+ return ts;
+}
+
+long long diff_timespec(struct timespec start, struct timespec end)
+{
+ long long start_ns, end_ns;
+
+ start_ns = ts_to_nsec(start);
+ end_ns = ts_to_nsec(end);
+ return end_ns - start_ns;
+}
+
+void get_monotonic_and_raw(struct timespec *mon, struct timespec *raw)
+{
+ struct timespec start, mid, end;
+ long long diff = 0, tmp;
+ int i;
+
+ for (i = 0; i < 3; i++) {
+ long long newdiff;
+
+ clock_gettime(CLOCK_MONOTONIC, &start);
+ clock_gettime(CLOCK_MONOTONIC_RAW, &mid);
+ clock_gettime(CLOCK_MONOTONIC, &end);
+
+ newdiff = diff_timespec(start, end);
+ if (diff == 0 || newdiff < diff) {
+ diff = newdiff;
+ *raw = mid;
+ tmp = (ts_to_nsec(start) + ts_to_nsec(end))/2;
+ *mon = nsec_to_ts(tmp);
+ }
+ }
+}
+
+int main(int argv, char **argc)
+{
+ struct timespec mon, raw, start, end;
+ long long delta1, delta2, interval, eppm, ppm;
+ struct timex tx1, tx2;
+
+ setbuf(stdout, NULL);
+
+ if (clock_gettime(CLOCK_MONOTONIC_RAW, &raw)) {
+ printf("ERR: NO CLOCK_MONOTONIC_RAW\n");
+ return -1;
+ }
+
+ tx1.modes = 0;
+ adjtimex(&tx1);
+ get_monotonic_and_raw(&mon, &raw);
+ start = mon;
+ delta1 = diff_timespec(mon, raw);
+
+ if (tx1.offset)
+ printf("WARNING: ADJ_OFFSET in progress, this will cause inaccurate results\n");
+
+ printf("Estimating clock drift: ");
+ sleep(120);
+
+ get_monotonic_and_raw(&mon, &raw);
+ end = mon;
+ tx2.modes = 0;
+ adjtimex(&tx2);
+ delta2 = diff_timespec(mon, raw);
+
+ interval = diff_timespec(start, end);
+
+ /* calculate measured ppm between MONOTONIC and MONOTONIC_RAW */
+ eppm = ((delta2-delta1)*NSEC_PER_SEC)/interval;
+ eppm = -eppm;
+ printf("%lld.%i(est)", eppm/1000, abs((int)(eppm%1000)));
+
+ /* Avg the two actual freq samples adjtimex gave us */
+ ppm = (tx1.freq + tx2.freq) * 1000 / 2;
+ ppm = (long long)tx1.freq * 1000;
+ ppm = shift_right(ppm, 16);
+ printf(" %lld.%i(act)", ppm/1000, abs((int)(ppm%1000)));
+
+ if (llabs(eppm - ppm) > 1000) {
+ printf(" [FAILED]\n");
+ return ksft_exit_fail();
+ }
+ printf(" [OK]\n");
+ return ksft_exit_pass();
+}
diff --git a/kernel/tools/testing/selftests/timers/rtctest.c b/kernel/tools/testing/selftests/timers/rtctest.c
new file mode 100644
index 000000000..d80ae8523
--- /dev/null
+++ b/kernel/tools/testing/selftests/timers/rtctest.c
@@ -0,0 +1,271 @@
+/*
+ * Real Time Clock Driver Test/Example Program
+ *
+ * Compile with:
+ * gcc -s -Wall -Wstrict-prototypes rtctest.c -o rtctest
+ *
+ * Copyright (C) 1996, Paul Gortmaker.
+ *
+ * Released under the GNU General Public License, version 2,
+ * included herein by reference.
+ *
+ */
+
+#include <stdio.h>
+#include <linux/rtc.h>
+#include <sys/ioctl.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <errno.h>
+
+
+/*
+ * This expects the new RTC class driver framework, working with
+ * clocks that will often not be clones of what the PC-AT had.
+ * Use the command line to specify another RTC if you need one.
+ */
+static const char default_rtc[] = "/dev/rtc0";
+
+
+int main(int argc, char **argv)
+{
+ int i, fd, retval, irqcount = 0;
+ unsigned long tmp, data;
+ struct rtc_time rtc_tm;
+ const char *rtc = default_rtc;
+ struct timeval start, end, diff;
+
+ switch (argc) {
+ case 2:
+ rtc = argv[1];
+ /* FALLTHROUGH */
+ case 1:
+ break;
+ default:
+ fprintf(stderr, "usage: rtctest [rtcdev]\n");
+ return 1;
+ }
+
+ fd = open(rtc, O_RDONLY);
+
+ if (fd == -1) {
+ perror(rtc);
+ exit(errno);
+ }
+
+ fprintf(stderr, "\n\t\t\tRTC Driver Test Example.\n\n");
+
+ /* Turn on update interrupts (one per second) */
+ retval = ioctl(fd, RTC_UIE_ON, 0);
+ if (retval == -1) {
+ if (errno == ENOTTY) {
+ fprintf(stderr,
+ "\n...Update IRQs not supported.\n");
+ goto test_READ;
+ }
+ perror("RTC_UIE_ON ioctl");
+ exit(errno);
+ }
+
+ fprintf(stderr, "Counting 5 update (1/sec) interrupts from reading %s:",
+ rtc);
+ fflush(stderr);
+ for (i=1; i<6; i++) {
+ /* This read will block */
+ retval = read(fd, &data, sizeof(unsigned long));
+ if (retval == -1) {
+ perror("read");
+ exit(errno);
+ }
+ fprintf(stderr, " %d",i);
+ fflush(stderr);
+ irqcount++;
+ }
+
+ fprintf(stderr, "\nAgain, from using select(2) on /dev/rtc:");
+ fflush(stderr);
+ for (i=1; i<6; i++) {
+ struct timeval tv = {5, 0}; /* 5 second timeout on select */
+ fd_set readfds;
+
+ FD_ZERO(&readfds);
+ FD_SET(fd, &readfds);
+ /* The select will wait until an RTC interrupt happens. */
+ retval = select(fd+1, &readfds, NULL, NULL, &tv);
+ if (retval == -1) {
+ perror("select");
+ exit(errno);
+ }
+ /* This read won't block unlike the select-less case above. */
+ retval = read(fd, &data, sizeof(unsigned long));
+ if (retval == -1) {
+ perror("read");
+ exit(errno);
+ }
+ fprintf(stderr, " %d",i);
+ fflush(stderr);
+ irqcount++;
+ }
+
+ /* Turn off update interrupts */
+ retval = ioctl(fd, RTC_UIE_OFF, 0);
+ if (retval == -1) {
+ perror("RTC_UIE_OFF ioctl");
+ exit(errno);
+ }
+
+test_READ:
+ /* Read the RTC time/date */
+ retval = ioctl(fd, RTC_RD_TIME, &rtc_tm);
+ if (retval == -1) {
+ perror("RTC_RD_TIME ioctl");
+ exit(errno);
+ }
+
+ fprintf(stderr, "\n\nCurrent RTC date/time is %d-%d-%d, %02d:%02d:%02d.\n",
+ rtc_tm.tm_mday, rtc_tm.tm_mon + 1, rtc_tm.tm_year + 1900,
+ rtc_tm.tm_hour, rtc_tm.tm_min, rtc_tm.tm_sec);
+
+ /* Set the alarm to 5 sec in the future, and check for rollover */
+ rtc_tm.tm_sec += 5;
+ if (rtc_tm.tm_sec >= 60) {
+ rtc_tm.tm_sec %= 60;
+ rtc_tm.tm_min++;
+ }
+ if (rtc_tm.tm_min == 60) {
+ rtc_tm.tm_min = 0;
+ rtc_tm.tm_hour++;
+ }
+ if (rtc_tm.tm_hour == 24)
+ rtc_tm.tm_hour = 0;
+
+ retval = ioctl(fd, RTC_ALM_SET, &rtc_tm);
+ if (retval == -1) {
+ if (errno == ENOTTY) {
+ fprintf(stderr,
+ "\n...Alarm IRQs not supported.\n");
+ goto test_PIE;
+ }
+ perror("RTC_ALM_SET ioctl");
+ exit(errno);
+ }
+
+ /* Read the current alarm settings */
+ retval = ioctl(fd, RTC_ALM_READ, &rtc_tm);
+ if (retval == -1) {
+ perror("RTC_ALM_READ ioctl");
+ exit(errno);
+ }
+
+ fprintf(stderr, "Alarm time now set to %02d:%02d:%02d.\n",
+ rtc_tm.tm_hour, rtc_tm.tm_min, rtc_tm.tm_sec);
+
+ /* Enable alarm interrupts */
+ retval = ioctl(fd, RTC_AIE_ON, 0);
+ if (retval == -1) {
+ perror("RTC_AIE_ON ioctl");
+ exit(errno);
+ }
+
+ fprintf(stderr, "Waiting 5 seconds for alarm...");
+ fflush(stderr);
+ /* This blocks until the alarm ring causes an interrupt */
+ retval = read(fd, &data, sizeof(unsigned long));
+ if (retval == -1) {
+ perror("read");
+ exit(errno);
+ }
+ irqcount++;
+ fprintf(stderr, " okay. Alarm rang.\n");
+
+ /* Disable alarm interrupts */
+ retval = ioctl(fd, RTC_AIE_OFF, 0);
+ if (retval == -1) {
+ perror("RTC_AIE_OFF ioctl");
+ exit(errno);
+ }
+
+test_PIE:
+ /* Read periodic IRQ rate */
+ retval = ioctl(fd, RTC_IRQP_READ, &tmp);
+ if (retval == -1) {
+ /* not all RTCs support periodic IRQs */
+ if (errno == ENOTTY) {
+ fprintf(stderr, "\nNo periodic IRQ support\n");
+ goto done;
+ }
+ perror("RTC_IRQP_READ ioctl");
+ exit(errno);
+ }
+ fprintf(stderr, "\nPeriodic IRQ rate is %ldHz.\n", tmp);
+
+ fprintf(stderr, "Counting 20 interrupts at:");
+ fflush(stderr);
+
+ /* The frequencies 128Hz, 256Hz, ... 8192Hz are only allowed for root. */
+ for (tmp=2; tmp<=64; tmp*=2) {
+
+ retval = ioctl(fd, RTC_IRQP_SET, tmp);
+ if (retval == -1) {
+ /* not all RTCs can change their periodic IRQ rate */
+ if (errno == ENOTTY) {
+ fprintf(stderr,
+ "\n...Periodic IRQ rate is fixed\n");
+ goto done;
+ }
+ perror("RTC_IRQP_SET ioctl");
+ exit(errno);
+ }
+
+ fprintf(stderr, "\n%ldHz:\t", tmp);
+ fflush(stderr);
+
+ /* Enable periodic interrupts */
+ retval = ioctl(fd, RTC_PIE_ON, 0);
+ if (retval == -1) {
+ perror("RTC_PIE_ON ioctl");
+ exit(errno);
+ }
+
+ for (i=1; i<21; i++) {
+ gettimeofday(&start, NULL);
+ /* This blocks */
+ retval = read(fd, &data, sizeof(unsigned long));
+ if (retval == -1) {
+ perror("read");
+ exit(errno);
+ }
+ gettimeofday(&end, NULL);
+ timersub(&end, &start, &diff);
+ if (diff.tv_sec > 0 ||
+ diff.tv_usec > ((1000000L / tmp) * 1.10)) {
+ fprintf(stderr, "\nPIE delta error: %ld.%06ld should be close to 0.%06ld\n",
+ diff.tv_sec, diff.tv_usec,
+ (1000000L / tmp));
+ fflush(stdout);
+ exit(-1);
+ }
+
+ fprintf(stderr, " %d",i);
+ fflush(stderr);
+ irqcount++;
+ }
+
+ /* Disable periodic interrupts */
+ retval = ioctl(fd, RTC_PIE_OFF, 0);
+ if (retval == -1) {
+ perror("RTC_PIE_OFF ioctl");
+ exit(errno);
+ }
+ }
+
+done:
+ fprintf(stderr, "\n\n\t\t\t *** Test complete ***\n");
+
+ close(fd);
+
+ return 0;
+}
diff --git a/kernel/tools/testing/selftests/timers/set-2038.c b/kernel/tools/testing/selftests/timers/set-2038.c
new file mode 100644
index 000000000..c8a7e1444
--- /dev/null
+++ b/kernel/tools/testing/selftests/timers/set-2038.c
@@ -0,0 +1,144 @@
+/* Time bounds setting test
+ * by: john stultz (johnstul@us.ibm.com)
+ * (C) Copyright IBM 2012
+ * Licensed under the GPLv2
+ *
+ * NOTE: This is a meta-test which sets the time to edge cases then
+ * uses other tests to detect problems. Thus this test requires that
+ * the inconsistency-check and nanosleep tests be present in the same
+ * directory it is run from.
+ *
+ * To build:
+ * $ gcc set-2038.c -o set-2038 -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <time.h>
+#include <sys/time.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define NSEC_PER_SEC 1000000000LL
+
+#define KTIME_MAX ((long long)~((unsigned long long)1 << 63))
+#define KTIME_SEC_MAX (KTIME_MAX / NSEC_PER_SEC)
+
+#define YEAR_1901 (-0x7fffffffL)
+#define YEAR_1970 1
+#define YEAR_2038 0x7fffffffL /*overflows 32bit time_t */
+#define YEAR_2262 KTIME_SEC_MAX /*overflows 64bit ktime_t */
+#define YEAR_MAX ((long long)((1ULL<<63)-1)) /*overflows 64bit time_t */
+
+int is32bits(void)
+{
+ return (sizeof(long) == 4);
+}
+
+int settime(long long time)
+{
+ struct timeval now;
+ int ret;
+
+ now.tv_sec = (time_t)time;
+ now.tv_usec = 0;
+
+ ret = settimeofday(&now, NULL);
+
+ printf("Setting time to 0x%lx: %d\n", (long)time, ret);
+ return ret;
+}
+
+int do_tests(void)
+{
+ int ret;
+
+ ret = system("date");
+ ret = system("./inconsistency-check -c 0 -t 20");
+ ret |= system("./nanosleep");
+ ret |= system("./nsleep-lat");
+ return ret;
+
+}
+
+int main(int argc, char *argv[])
+{
+ int ret = 0;
+ int opt, dangerous = 0;
+ time_t start;
+
+ /* Process arguments */
+ while ((opt = getopt(argc, argv, "d")) != -1) {
+ switch (opt) {
+ case 'd':
+ dangerous = 1;
+ }
+ }
+
+ start = time(0);
+
+ /* First test that crazy values don't work */
+ if (!settime(YEAR_1901)) {
+ ret = -1;
+ goto out;
+ }
+ if (!settime(YEAR_MAX)) {
+ ret = -1;
+ goto out;
+ }
+ if (!is32bits() && !settime(YEAR_2262)) {
+ ret = -1;
+ goto out;
+ }
+
+ /* Now test behavior near edges */
+ settime(YEAR_1970);
+ ret = do_tests();
+ if (ret)
+ goto out;
+
+ settime(YEAR_2038 - 600);
+ ret = do_tests();
+ if (ret)
+ goto out;
+
+ /* The rest of the tests can blowup on 32bit systems */
+ if (is32bits() && !dangerous)
+ goto out;
+ /* Test rollover behavior 32bit edge */
+ settime(YEAR_2038 - 10);
+ ret = do_tests();
+ if (ret)
+ goto out;
+
+ settime(YEAR_2262 - 600);
+ ret = do_tests();
+
+out:
+ /* restore clock */
+ settime(start);
+ if (ret)
+ return ksft_exit_fail();
+ return ksft_exit_pass();
+}
diff --git a/kernel/tools/testing/selftests/timers/set-tai.c b/kernel/tools/testing/selftests/timers/set-tai.c
new file mode 100644
index 000000000..dc88dbc88
--- /dev/null
+++ b/kernel/tools/testing/selftests/timers/set-tai.c
@@ -0,0 +1,79 @@
+/* Set tai offset
+ * by: John Stultz <john.stultz@linaro.org>
+ * (C) Copyright Linaro 2013
+ * Licensed under the GPLv2
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#include <unistd.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+int set_tai(int offset)
+{
+ struct timex tx;
+
+ memset(&tx, 0, sizeof(tx));
+
+ tx.modes = ADJ_TAI;
+ tx.constant = offset;
+
+ return adjtimex(&tx);
+}
+
+int get_tai(void)
+{
+ struct timex tx;
+
+ memset(&tx, 0, sizeof(tx));
+
+ adjtimex(&tx);
+ return tx.tai;
+}
+
+int main(int argc, char **argv)
+{
+ int i, ret;
+
+ ret = get_tai();
+ printf("tai offset started at %i\n", ret);
+
+ printf("Checking tai offsets can be properly set: ");
+ for (i = 1; i <= 60; i++) {
+ ret = set_tai(i);
+ ret = get_tai();
+ if (ret != i) {
+ printf("[FAILED] expected: %i got %i\n", i, ret);
+ return ksft_exit_fail();
+ }
+ }
+ printf("[OK]\n");
+ return ksft_exit_pass();
+}
diff --git a/kernel/tools/testing/selftests/timers/set-timer-lat.c b/kernel/tools/testing/selftests/timers/set-timer-lat.c
new file mode 100644
index 000000000..4fc98c5b0
--- /dev/null
+++ b/kernel/tools/testing/selftests/timers/set-timer-lat.c
@@ -0,0 +1,216 @@
+/* set_timer latency test
+ * John Stultz (john.stultz@linaro.org)
+ * (C) Copyright Linaro 2014
+ * Licensed under the GPLv2
+ *
+ * This test makes sure the set_timer api is correct
+ *
+ * To build:
+ * $ gcc set-timer-lat.c -o set-timer-lat -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <stdio.h>
+#include <unistd.h>
+#include <time.h>
+#include <string.h>
+#include <signal.h>
+#include <stdlib.h>
+#include <pthread.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define CLOCK_REALTIME 0
+#define CLOCK_MONOTONIC 1
+#define CLOCK_PROCESS_CPUTIME_ID 2
+#define CLOCK_THREAD_CPUTIME_ID 3
+#define CLOCK_MONOTONIC_RAW 4
+#define CLOCK_REALTIME_COARSE 5
+#define CLOCK_MONOTONIC_COARSE 6
+#define CLOCK_BOOTTIME 7
+#define CLOCK_REALTIME_ALARM 8
+#define CLOCK_BOOTTIME_ALARM 9
+#define CLOCK_HWSPECIFIC 10
+#define CLOCK_TAI 11
+#define NR_CLOCKIDS 12
+
+
+#define NSEC_PER_SEC 1000000000ULL
+#define UNRESONABLE_LATENCY 40000000 /* 40ms in nanosecs */
+
+#define TIMER_SECS 1
+int alarmcount;
+int clock_id;
+struct timespec start_time;
+long long max_latency_ns;
+
+char *clockstring(int clockid)
+{
+ switch (clockid) {
+ case CLOCK_REALTIME:
+ return "CLOCK_REALTIME";
+ case CLOCK_MONOTONIC:
+ return "CLOCK_MONOTONIC";
+ case CLOCK_PROCESS_CPUTIME_ID:
+ return "CLOCK_PROCESS_CPUTIME_ID";
+ case CLOCK_THREAD_CPUTIME_ID:
+ return "CLOCK_THREAD_CPUTIME_ID";
+ case CLOCK_MONOTONIC_RAW:
+ return "CLOCK_MONOTONIC_RAW";
+ case CLOCK_REALTIME_COARSE:
+ return "CLOCK_REALTIME_COARSE";
+ case CLOCK_MONOTONIC_COARSE:
+ return "CLOCK_MONOTONIC_COARSE";
+ case CLOCK_BOOTTIME:
+ return "CLOCK_BOOTTIME";
+ case CLOCK_REALTIME_ALARM:
+ return "CLOCK_REALTIME_ALARM";
+ case CLOCK_BOOTTIME_ALARM:
+ return "CLOCK_BOOTTIME_ALARM";
+ case CLOCK_TAI:
+ return "CLOCK_TAI";
+ };
+ return "UNKNOWN_CLOCKID";
+}
+
+
+long long timespec_sub(struct timespec a, struct timespec b)
+{
+ long long ret = NSEC_PER_SEC * b.tv_sec + b.tv_nsec;
+
+ ret -= NSEC_PER_SEC * a.tv_sec + a.tv_nsec;
+ return ret;
+}
+
+
+void sigalarm(int signo)
+{
+ long long delta_ns;
+ struct timespec ts;
+
+ clock_gettime(clock_id, &ts);
+ alarmcount++;
+
+ delta_ns = timespec_sub(start_time, ts);
+ delta_ns -= NSEC_PER_SEC * TIMER_SECS * alarmcount;
+
+ if (delta_ns < 0)
+ printf("%s timer fired early: FAIL\n", clockstring(clock_id));
+
+ if (delta_ns > max_latency_ns)
+ max_latency_ns = delta_ns;
+}
+
+int do_timer(int clock_id, int flags)
+{
+ struct sigevent se;
+ timer_t tm1;
+ struct itimerspec its1, its2;
+ int err;
+
+ /* Set up timer: */
+ memset(&se, 0, sizeof(se));
+ se.sigev_notify = SIGEV_SIGNAL;
+ se.sigev_signo = SIGRTMAX;
+ se.sigev_value.sival_int = 0;
+
+ max_latency_ns = 0;
+ alarmcount = 0;
+
+ err = timer_create(clock_id, &se, &tm1);
+ if (err) {
+ if ((clock_id == CLOCK_REALTIME_ALARM) ||
+ (clock_id == CLOCK_BOOTTIME_ALARM)) {
+ printf("%-22s %s missing CAP_WAKE_ALARM? : [UNSUPPORTED]\n",
+ clockstring(clock_id),
+ flags ? "ABSTIME":"RELTIME");
+ return 0;
+ }
+ printf("%s - timer_create() failed\n", clockstring(clock_id));
+ return -1;
+ }
+
+ clock_gettime(clock_id, &start_time);
+ if (flags) {
+ its1.it_value = start_time;
+ its1.it_value.tv_sec += TIMER_SECS;
+ } else {
+ its1.it_value.tv_sec = TIMER_SECS;
+ its1.it_value.tv_nsec = 0;
+ }
+ its1.it_interval.tv_sec = TIMER_SECS;
+ its1.it_interval.tv_nsec = 0;
+
+ err = timer_settime(tm1, flags, &its1, &its2);
+ if (err) {
+ printf("%s - timer_settime() failed\n", clockstring(clock_id));
+ return -1;
+ }
+
+ while (alarmcount < 5)
+ sleep(1);
+
+ printf("%-22s %s max latency: %10lld ns : ",
+ clockstring(clock_id),
+ flags ? "ABSTIME":"RELTIME",
+ max_latency_ns);
+
+ timer_delete(tm1);
+ if (max_latency_ns < UNRESONABLE_LATENCY) {
+ printf("[OK]\n");
+ return 0;
+ }
+ printf("[FAILED]\n");
+ return -1;
+}
+
+int main(void)
+{
+ struct sigaction act;
+ int signum = SIGRTMAX;
+ int ret = 0;
+
+ /* Set up signal handler: */
+ sigfillset(&act.sa_mask);
+ act.sa_flags = 0;
+ act.sa_handler = sigalarm;
+ sigaction(signum, &act, NULL);
+
+ printf("Setting timers for every %i seconds\n", TIMER_SECS);
+ for (clock_id = 0; clock_id < NR_CLOCKIDS; clock_id++) {
+
+ if ((clock_id == CLOCK_PROCESS_CPUTIME_ID) ||
+ (clock_id == CLOCK_THREAD_CPUTIME_ID) ||
+ (clock_id == CLOCK_MONOTONIC_RAW) ||
+ (clock_id == CLOCK_REALTIME_COARSE) ||
+ (clock_id == CLOCK_MONOTONIC_COARSE) ||
+ (clock_id == CLOCK_HWSPECIFIC))
+ continue;
+
+ ret |= do_timer(clock_id, TIMER_ABSTIME);
+ ret |= do_timer(clock_id, 0);
+ }
+ if (ret)
+ return ksft_exit_fail();
+ return ksft_exit_pass();
+}
diff --git a/kernel/tools/testing/selftests/timers/skew_consistency.c b/kernel/tools/testing/selftests/timers/skew_consistency.c
new file mode 100644
index 000000000..5562f84ee
--- /dev/null
+++ b/kernel/tools/testing/selftests/timers/skew_consistency.c
@@ -0,0 +1,89 @@
+/* ADJ_FREQ Skew consistency test
+ * by: john stultz (johnstul@us.ibm.com)
+ * (C) Copyright IBM 2012
+ * Licensed under the GPLv2
+ *
+ * NOTE: This is a meta-test which cranks the ADJ_FREQ knob back
+ * and forth and watches for consistency problems. Thus this test requires
+ * that the inconsistency-check tests be present in the same directory it
+ * is run from.
+ *
+ * To build:
+ * $ gcc skew_consistency.c -o skew_consistency -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <time.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/wait.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define NSEC_PER_SEC 1000000000LL
+
+int main(int argv, char **argc)
+{
+ struct timex tx;
+ int ret, ppm;
+ pid_t pid;
+
+
+ printf("Running Asyncrhonous Frequency Changing Tests...\n");
+
+ pid = fork();
+ if (!pid)
+ return system("./inconsistency-check -c 1 -t 600");
+
+ ppm = 500;
+ ret = 0;
+
+ while (pid != waitpid(pid, &ret, WNOHANG)) {
+ ppm = -ppm;
+ tx.modes = ADJ_FREQUENCY;
+ tx.freq = ppm << 16;
+ adjtimex(&tx);
+ usleep(500000);
+ }
+
+ /* Set things back */
+ tx.modes = ADJ_FREQUENCY;
+ tx.offset = 0;
+ adjtimex(&tx);
+
+
+ if (ret) {
+ printf("[FAILED]\n");
+ return ksft_exit_fail();
+ }
+ printf("[OK]\n");
+ return ksft_exit_pass();
+}
diff --git a/kernel/tools/testing/selftests/timers/threadtest.c b/kernel/tools/testing/selftests/timers/threadtest.c
new file mode 100644
index 000000000..e632e116f
--- /dev/null
+++ b/kernel/tools/testing/selftests/timers/threadtest.c
@@ -0,0 +1,204 @@
+/* threadtest.c
+ * by: john stultz (johnstul@us.ibm.com)
+ * (C) Copyright IBM 2004, 2005, 2006, 2012
+ * Licensed under the GPLv2
+ *
+ * To build:
+ * $ gcc threadtest.c -o threadtest -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <sys/time.h>
+#include <pthread.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+
+/* serializes shared list access */
+pthread_mutex_t list_lock = PTHREAD_MUTEX_INITIALIZER;
+/* serializes console output */
+pthread_mutex_t print_lock = PTHREAD_MUTEX_INITIALIZER;
+
+
+#define MAX_THREADS 128
+#define LISTSIZE 128
+
+int done = 0;
+
+struct timespec global_list[LISTSIZE];
+int listcount = 0;
+
+
+void checklist(struct timespec *list, int size)
+{
+ int i, j;
+ struct timespec *a, *b;
+
+ /* scan the list */
+ for (i = 0; i < size-1; i++) {
+ a = &list[i];
+ b = &list[i+1];
+
+ /* look for any time inconsistencies */
+ if ((b->tv_sec <= a->tv_sec) &&
+ (b->tv_nsec < a->tv_nsec)) {
+
+ /* flag other threads */
+ done = 1;
+
+ /*serialize printing to avoid junky output*/
+ pthread_mutex_lock(&print_lock);
+
+ /* dump the list */
+ printf("\n");
+ for (j = 0; j < size; j++) {
+ if (j == i)
+ printf("---------------\n");
+ printf("%lu:%lu\n", list[j].tv_sec, list[j].tv_nsec);
+ if (j == i+1)
+ printf("---------------\n");
+ }
+ printf("[FAILED]\n");
+
+ pthread_mutex_unlock(&print_lock);
+ }
+ }
+}
+
+/* The shared thread shares a global list
+ * that each thread fills while holding the lock.
+ * This stresses clock syncronization across cpus.
+ */
+void *shared_thread(void *arg)
+{
+ while (!done) {
+ /* protect the list */
+ pthread_mutex_lock(&list_lock);
+
+ /* see if we're ready to check the list */
+ if (listcount >= LISTSIZE) {
+ checklist(global_list, LISTSIZE);
+ listcount = 0;
+ }
+ clock_gettime(CLOCK_MONOTONIC, &global_list[listcount++]);
+
+ pthread_mutex_unlock(&list_lock);
+ }
+ return NULL;
+}
+
+
+/* Each independent thread fills in its own
+ * list. This stresses clock_gettime() lock contention.
+ */
+void *independent_thread(void *arg)
+{
+ struct timespec my_list[LISTSIZE];
+ int count;
+
+ while (!done) {
+ /* fill the list */
+ for (count = 0; count < LISTSIZE; count++)
+ clock_gettime(CLOCK_MONOTONIC, &my_list[count]);
+ checklist(my_list, LISTSIZE);
+ }
+ return NULL;
+}
+
+#define DEFAULT_THREAD_COUNT 8
+#define DEFAULT_RUNTIME 30
+
+int main(int argc, char **argv)
+{
+ int thread_count, i;
+ time_t start, now, runtime;
+ char buf[255];
+ pthread_t pth[MAX_THREADS];
+ int opt;
+ void *tret;
+ int ret = 0;
+ void *(*thread)(void *) = shared_thread;
+
+ thread_count = DEFAULT_THREAD_COUNT;
+ runtime = DEFAULT_RUNTIME;
+
+ /* Process arguments */
+ while ((opt = getopt(argc, argv, "t:n:i")) != -1) {
+ switch (opt) {
+ case 't':
+ runtime = atoi(optarg);
+ break;
+ case 'n':
+ thread_count = atoi(optarg);
+ break;
+ case 'i':
+ thread = independent_thread;
+ printf("using independent threads\n");
+ break;
+ default:
+ printf("Usage: %s [-t <secs>] [-n <numthreads>] [-i]\n", argv[0]);
+ printf(" -t: time to run\n");
+ printf(" -n: number of threads\n");
+ printf(" -i: use independent threads\n");
+ return -1;
+ }
+ }
+
+ if (thread_count > MAX_THREADS)
+ thread_count = MAX_THREADS;
+
+
+ setbuf(stdout, NULL);
+
+ start = time(0);
+ strftime(buf, 255, "%a, %d %b %Y %T %z", localtime(&start));
+ printf("%s\n", buf);
+ printf("Testing consistency with %i threads for %ld seconds: ", thread_count, runtime);
+
+ /* spawn */
+ for (i = 0; i < thread_count; i++)
+ pthread_create(&pth[i], 0, thread, 0);
+
+ while (time(&now) < start + runtime) {
+ sleep(1);
+ if (done) {
+ ret = 1;
+ strftime(buf, 255, "%a, %d %b %Y %T %z", localtime(&now));
+ printf("%s\n", buf);
+ goto out;
+ }
+ }
+ printf("[OK]\n");
+ done = 1;
+
+out:
+ /* wait */
+ for (i = 0; i < thread_count; i++)
+ pthread_join(pth[i], &tret);
+
+ /* die */
+ if (ret)
+ ksft_exit_fail();
+ return ksft_exit_pass();
+}
diff --git a/kernel/tools/testing/selftests/timers/valid-adjtimex.c b/kernel/tools/testing/selftests/timers/valid-adjtimex.c
new file mode 100644
index 000000000..e86d937cc
--- /dev/null
+++ b/kernel/tools/testing/selftests/timers/valid-adjtimex.c
@@ -0,0 +1,202 @@
+/* valid adjtimex test
+ * by: John Stultz <john.stultz@linaro.org>
+ * (C) Copyright Linaro 2015
+ * Licensed under the GPLv2
+ *
+ * This test validates adjtimex interface with valid
+ * and invalid test data.
+ *
+ * Usage: valid-adjtimex
+ *
+ * To build:
+ * $ gcc valid-adjtimex.c -o valid-adjtimex -lrt
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/timex.h>
+#include <string.h>
+#include <signal.h>
+#include <unistd.h>
+#ifdef KTEST
+#include "../kselftest.h"
+#else
+static inline int ksft_exit_pass(void)
+{
+ exit(0);
+}
+static inline int ksft_exit_fail(void)
+{
+ exit(1);
+}
+#endif
+
+#define NSEC_PER_SEC 1000000000L
+
+/* clear NTP time_status & time_state */
+int clear_time_state(void)
+{
+ struct timex tx;
+ int ret;
+
+ tx.modes = ADJ_STATUS;
+ tx.status = 0;
+ ret = adjtimex(&tx);
+ return ret;
+}
+
+#define NUM_FREQ_VALID 32
+#define NUM_FREQ_OUTOFRANGE 4
+#define NUM_FREQ_INVALID 2
+
+long valid_freq[NUM_FREQ_VALID] = {
+ -499<<16,
+ -450<<16,
+ -400<<16,
+ -350<<16,
+ -300<<16,
+ -250<<16,
+ -200<<16,
+ -150<<16,
+ -100<<16,
+ -75<<16,
+ -50<<16,
+ -25<<16,
+ -10<<16,
+ -5<<16,
+ -1<<16,
+ -1000,
+ 1<<16,
+ 5<<16,
+ 10<<16,
+ 25<<16,
+ 50<<16,
+ 75<<16,
+ 100<<16,
+ 150<<16,
+ 200<<16,
+ 250<<16,
+ 300<<16,
+ 350<<16,
+ 400<<16,
+ 450<<16,
+ 499<<16,
+};
+
+long outofrange_freq[NUM_FREQ_OUTOFRANGE] = {
+ -1000<<16,
+ -550<<16,
+ 550<<16,
+ 1000<<16,
+};
+
+#define LONG_MAX (~0UL>>1)
+#define LONG_MIN (-LONG_MAX - 1)
+
+long invalid_freq[NUM_FREQ_INVALID] = {
+ LONG_MAX,
+ LONG_MIN,
+};
+
+int validate_freq(void)
+{
+ struct timex tx;
+ int ret, pass = 0;
+ int i;
+
+ clear_time_state();
+
+ memset(&tx, 0, sizeof(struct timex));
+ /* Set the leap second insert flag */
+
+ printf("Testing ADJ_FREQ... ");
+ for (i = 0; i < NUM_FREQ_VALID; i++) {
+ tx.modes = ADJ_FREQUENCY;
+ tx.freq = valid_freq[i];
+
+ ret = adjtimex(&tx);
+ if (ret < 0) {
+ printf("[FAIL]\n");
+ printf("Error: adjtimex(ADJ_FREQ, %ld - %ld ppm\n",
+ valid_freq[i], valid_freq[i]>>16);
+ pass = -1;
+ goto out;
+ }
+ tx.modes = 0;
+ ret = adjtimex(&tx);
+ if (tx.freq != valid_freq[i]) {
+ printf("Warning: freq value %ld not what we set it (%ld)!\n",
+ tx.freq, valid_freq[i]);
+ }
+ }
+ for (i = 0; i < NUM_FREQ_OUTOFRANGE; i++) {
+ tx.modes = ADJ_FREQUENCY;
+ tx.freq = outofrange_freq[i];
+
+ ret = adjtimex(&tx);
+ if (ret < 0) {
+ printf("[FAIL]\n");
+ printf("Error: adjtimex(ADJ_FREQ, %ld - %ld ppm\n",
+ outofrange_freq[i], outofrange_freq[i]>>16);
+ pass = -1;
+ goto out;
+ }
+ tx.modes = 0;
+ ret = adjtimex(&tx);
+ if (tx.freq == outofrange_freq[i]) {
+ printf("[FAIL]\n");
+ printf("ERROR: out of range value %ld actually set!\n",
+ tx.freq);
+ pass = -1;
+ goto out;
+ }
+ }
+
+
+ if (sizeof(long) == 8) { /* this case only applies to 64bit systems */
+ for (i = 0; i < NUM_FREQ_INVALID; i++) {
+ tx.modes = ADJ_FREQUENCY;
+ tx.freq = invalid_freq[i];
+ ret = adjtimex(&tx);
+ if (ret >= 0) {
+ printf("[FAIL]\n");
+ printf("Error: No failure on invalid ADJ_FREQUENCY %ld\n",
+ invalid_freq[i]);
+ pass = -1;
+ goto out;
+ }
+ }
+ }
+
+ printf("[OK]\n");
+out:
+ /* reset freq to zero */
+ tx.modes = ADJ_FREQUENCY;
+ tx.freq = 0;
+ ret = adjtimex(&tx);
+
+ return pass;
+}
+
+
+int main(int argc, char **argv)
+{
+ if (validate_freq())
+ return ksft_exit_fail();
+
+ return ksft_exit_pass();
+}
diff --git a/kernel/tools/testing/selftests/user/Makefile b/kernel/tools/testing/selftests/user/Makefile
new file mode 100644
index 000000000..d401b63c5
--- /dev/null
+++ b/kernel/tools/testing/selftests/user/Makefile
@@ -0,0 +1,8 @@
+# Makefile for user memory selftests
+
+# No binaries, but make sure arg-less "make" doesn't trigger "run_tests"
+all:
+
+TEST_PROGS := test_user_copy.sh
+
+include ../lib.mk
diff --git a/kernel/tools/testing/selftests/user/test_user_copy.sh b/kernel/tools/testing/selftests/user/test_user_copy.sh
new file mode 100755
index 000000000..350107f40
--- /dev/null
+++ b/kernel/tools/testing/selftests/user/test_user_copy.sh
@@ -0,0 +1,10 @@
+#!/bin/sh
+# Runs copy_to/from_user infrastructure using test_user_copy kernel module
+
+if /sbin/modprobe -q test_user_copy; then
+ /sbin/modprobe -q -r test_user_copy
+ echo "user_copy: ok"
+else
+ echo "user_copy: [FAIL]"
+ exit 1
+fi
diff --git a/kernel/tools/testing/selftests/vm/.gitignore b/kernel/tools/testing/selftests/vm/.gitignore
new file mode 100644
index 000000000..ff1bb16ce
--- /dev/null
+++ b/kernel/tools/testing/selftests/vm/.gitignore
@@ -0,0 +1,4 @@
+hugepage-mmap
+hugepage-shm
+map_hugetlb
+thuge-gen
diff --git a/kernel/tools/testing/selftests/vm/Makefile b/kernel/tools/testing/selftests/vm/Makefile
new file mode 100644
index 000000000..a5ce9534e
--- /dev/null
+++ b/kernel/tools/testing/selftests/vm/Makefile
@@ -0,0 +1,17 @@
+# Makefile for vm selftests
+
+CFLAGS = -Wall
+BINARIES = hugepage-mmap hugepage-shm map_hugetlb thuge-gen hugetlbfstest
+BINARIES += transhuge-stress
+
+all: $(BINARIES)
+%: %.c
+ $(CC) $(CFLAGS) -o $@ $^ -lrt
+
+TEST_PROGS := run_vmtests
+TEST_FILES := $(BINARIES)
+
+include ../lib.mk
+
+clean:
+ $(RM) $(BINARIES)
diff --git a/kernel/tools/testing/selftests/vm/hugepage-mmap.c b/kernel/tools/testing/selftests/vm/hugepage-mmap.c
new file mode 100644
index 000000000..a10f310d2
--- /dev/null
+++ b/kernel/tools/testing/selftests/vm/hugepage-mmap.c
@@ -0,0 +1,92 @@
+/*
+ * hugepage-mmap:
+ *
+ * Example of using huge page memory in a user application using the mmap
+ * system call. Before running this application, make sure that the
+ * administrator has mounted the hugetlbfs filesystem (on some directory
+ * like /mnt) using the command mount -t hugetlbfs nodev /mnt. In this
+ * example, the app is requesting memory of size 256MB that is backed by
+ * huge pages.
+ *
+ * For the ia64 architecture, the Linux kernel reserves Region number 4 for
+ * huge pages. That means that if one requires a fixed address, a huge page
+ * aligned address starting with 0x800000... will be required. If a fixed
+ * address is not required, the kernel will select an address in the proper
+ * range.
+ * Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <sys/mman.h>
+#include <fcntl.h>
+
+#define FILE_NAME "huge/hugepagefile"
+#define LENGTH (256UL*1024*1024)
+#define PROTECTION (PROT_READ | PROT_WRITE)
+
+/* Only ia64 requires this */
+#ifdef __ia64__
+#define ADDR (void *)(0x8000000000000000UL)
+#define FLAGS (MAP_SHARED | MAP_FIXED)
+#else
+#define ADDR (void *)(0x0UL)
+#define FLAGS (MAP_SHARED)
+#endif
+
+static void check_bytes(char *addr)
+{
+ printf("First hex is %x\n", *((unsigned int *)addr));
+}
+
+static void write_bytes(char *addr)
+{
+ unsigned long i;
+
+ for (i = 0; i < LENGTH; i++)
+ *(addr + i) = (char)i;
+}
+
+static int read_bytes(char *addr)
+{
+ unsigned long i;
+
+ check_bytes(addr);
+ for (i = 0; i < LENGTH; i++)
+ if (*(addr + i) != (char)i) {
+ printf("Mismatch at %lu\n", i);
+ return 1;
+ }
+ return 0;
+}
+
+int main(void)
+{
+ void *addr;
+ int fd, ret;
+
+ fd = open(FILE_NAME, O_CREAT | O_RDWR, 0755);
+ if (fd < 0) {
+ perror("Open failed");
+ exit(1);
+ }
+
+ addr = mmap(ADDR, LENGTH, PROTECTION, FLAGS, fd, 0);
+ if (addr == MAP_FAILED) {
+ perror("mmap");
+ unlink(FILE_NAME);
+ exit(1);
+ }
+
+ printf("Returned address is %p\n", addr);
+ check_bytes(addr);
+ write_bytes(addr);
+ ret = read_bytes(addr);
+
+ munmap(addr, LENGTH);
+ close(fd);
+ unlink(FILE_NAME);
+
+ return ret;
+}
diff --git a/kernel/tools/testing/selftests/vm/hugepage-shm.c b/kernel/tools/testing/selftests/vm/hugepage-shm.c
new file mode 100644
index 000000000..0d0ef4fc0
--- /dev/null
+++ b/kernel/tools/testing/selftests/vm/hugepage-shm.c
@@ -0,0 +1,100 @@
+/*
+ * hugepage-shm:
+ *
+ * Example of using huge page memory in a user application using Sys V shared
+ * memory system calls. In this example the app is requesting 256MB of
+ * memory that is backed by huge pages. The application uses the flag
+ * SHM_HUGETLB in the shmget system call to inform the kernel that it is
+ * requesting huge pages.
+ *
+ * For the ia64 architecture, the Linux kernel reserves Region number 4 for
+ * huge pages. That means that if one requires a fixed address, a huge page
+ * aligned address starting with 0x800000... will be required. If a fixed
+ * address is not required, the kernel will select an address in the proper
+ * range.
+ * Other architectures, such as ppc64, i386 or x86_64 are not so constrained.
+ *
+ * Note: The default shared memory limit is quite low on many kernels,
+ * you may need to increase it via:
+ *
+ * echo 268435456 > /proc/sys/kernel/shmmax
+ *
+ * This will increase the maximum size per shared memory segment to 256MB.
+ * The other limit that you will hit eventually is shmall which is the
+ * total amount of shared memory in pages. To set it to 16GB on a system
+ * with a 4kB pagesize do:
+ *
+ * echo 4194304 > /proc/sys/kernel/shmall
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/ipc.h>
+#include <sys/shm.h>
+#include <sys/mman.h>
+
+#ifndef SHM_HUGETLB
+#define SHM_HUGETLB 04000
+#endif
+
+#define LENGTH (256UL*1024*1024)
+
+#define dprintf(x) printf(x)
+
+/* Only ia64 requires this */
+#ifdef __ia64__
+#define ADDR (void *)(0x8000000000000000UL)
+#define SHMAT_FLAGS (SHM_RND)
+#else
+#define ADDR (void *)(0x0UL)
+#define SHMAT_FLAGS (0)
+#endif
+
+int main(void)
+{
+ int shmid;
+ unsigned long i;
+ char *shmaddr;
+
+ shmid = shmget(2, LENGTH, SHM_HUGETLB | IPC_CREAT | SHM_R | SHM_W);
+ if (shmid < 0) {
+ perror("shmget");
+ exit(1);
+ }
+ printf("shmid: 0x%x\n", shmid);
+
+ shmaddr = shmat(shmid, ADDR, SHMAT_FLAGS);
+ if (shmaddr == (char *)-1) {
+ perror("Shared memory attach failure");
+ shmctl(shmid, IPC_RMID, NULL);
+ exit(2);
+ }
+ printf("shmaddr: %p\n", shmaddr);
+
+ dprintf("Starting the writes:\n");
+ for (i = 0; i < LENGTH; i++) {
+ shmaddr[i] = (char)(i);
+ if (!(i % (1024 * 1024)))
+ dprintf(".");
+ }
+ dprintf("\n");
+
+ dprintf("Starting the Check...");
+ for (i = 0; i < LENGTH; i++)
+ if (shmaddr[i] != (char)i) {
+ printf("\nIndex %lu mismatched\n", i);
+ exit(3);
+ }
+ dprintf("Done.\n");
+
+ if (shmdt((const void *)shmaddr) != 0) {
+ perror("Detach failure");
+ shmctl(shmid, IPC_RMID, NULL);
+ exit(4);
+ }
+
+ shmctl(shmid, IPC_RMID, NULL);
+
+ return 0;
+}
diff --git a/kernel/tools/testing/selftests/vm/hugetlbfstest.c b/kernel/tools/testing/selftests/vm/hugetlbfstest.c
new file mode 100644
index 000000000..02e1072ec
--- /dev/null
+++ b/kernel/tools/testing/selftests/vm/hugetlbfstest.c
@@ -0,0 +1,86 @@
+#define _GNU_SOURCE
+#include <assert.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+typedef unsigned long long u64;
+
+static size_t length = 1 << 24;
+
+static u64 read_rss(void)
+{
+ char buf[4096], *s = buf;
+ int i, fd;
+ u64 rss;
+
+ fd = open("/proc/self/statm", O_RDONLY);
+ assert(fd > 2);
+ memset(buf, 0, sizeof(buf));
+ read(fd, buf, sizeof(buf) - 1);
+ for (i = 0; i < 1; i++)
+ s = strchr(s, ' ') + 1;
+ rss = strtoull(s, NULL, 10);
+ return rss << 12; /* assumes 4k pagesize */
+}
+
+static void do_mmap(int fd, int extra_flags, int unmap)
+{
+ int *p;
+ int flags = MAP_PRIVATE | MAP_POPULATE | extra_flags;
+ u64 before, after;
+ int ret;
+
+ before = read_rss();
+ p = mmap(NULL, length, PROT_READ | PROT_WRITE, flags, fd, 0);
+ assert(p != MAP_FAILED ||
+ !"mmap returned an unexpected error");
+ after = read_rss();
+ assert(llabs(after - before - length) < 0x40000 ||
+ !"rss didn't grow as expected");
+ if (!unmap)
+ return;
+ ret = munmap(p, length);
+ assert(!ret || !"munmap returned an unexpected error");
+ after = read_rss();
+ assert(llabs(after - before) < 0x40000 ||
+ !"rss didn't shrink as expected");
+}
+
+static int open_file(const char *path)
+{
+ int fd, err;
+
+ unlink(path);
+ fd = open(path, O_CREAT | O_RDWR | O_TRUNC | O_EXCL
+ | O_LARGEFILE | O_CLOEXEC, 0600);
+ assert(fd > 2);
+ unlink(path);
+ err = ftruncate(fd, length);
+ assert(!err);
+ return fd;
+}
+
+int main(void)
+{
+ int hugefd, fd;
+
+ fd = open_file("/dev/shm/hugetlbhog");
+ hugefd = open_file("/hugepages/hugetlbhog");
+
+ system("echo 100 > /proc/sys/vm/nr_hugepages");
+ do_mmap(-1, MAP_ANONYMOUS, 1);
+ do_mmap(fd, 0, 1);
+ do_mmap(-1, MAP_ANONYMOUS | MAP_HUGETLB, 1);
+ do_mmap(hugefd, 0, 1);
+ do_mmap(hugefd, MAP_HUGETLB, 1);
+ /* Leak the last one to test do_exit() */
+ do_mmap(-1, MAP_ANONYMOUS | MAP_HUGETLB, 0);
+ printf("oll korrekt.\n");
+ return 0;
+}
diff --git a/kernel/tools/testing/selftests/vm/map_hugetlb.c b/kernel/tools/testing/selftests/vm/map_hugetlb.c
new file mode 100644
index 000000000..addcd6fc1
--- /dev/null
+++ b/kernel/tools/testing/selftests/vm/map_hugetlb.c
@@ -0,0 +1,83 @@
+/*
+ * Example of using hugepage memory in a user application using the mmap
+ * system call with MAP_HUGETLB flag. Before running this program make
+ * sure the administrator has allocated enough default sized huge pages
+ * to cover the 256 MB allocation.
+ *
+ * For ia64 architecture, Linux kernel reserves Region number 4 for hugepages.
+ * That means the addresses starting with 0x800000... will need to be
+ * specified. Specifying a fixed address is not required on ppc64, i386
+ * or x86_64.
+ */
+#include <stdlib.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <sys/mman.h>
+#include <fcntl.h>
+
+#define LENGTH (256UL*1024*1024)
+#define PROTECTION (PROT_READ | PROT_WRITE)
+
+#ifndef MAP_HUGETLB
+#define MAP_HUGETLB 0x40000 /* arch specific */
+#endif
+
+/* Only ia64 requires this */
+#ifdef __ia64__
+#define ADDR (void *)(0x8000000000000000UL)
+#define FLAGS (MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB | MAP_FIXED)
+#else
+#define ADDR (void *)(0x0UL)
+#define FLAGS (MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB)
+#endif
+
+static void check_bytes(char *addr)
+{
+ printf("First hex is %x\n", *((unsigned int *)addr));
+}
+
+static void write_bytes(char *addr)
+{
+ unsigned long i;
+
+ for (i = 0; i < LENGTH; i++)
+ *(addr + i) = (char)i;
+}
+
+static int read_bytes(char *addr)
+{
+ unsigned long i;
+
+ check_bytes(addr);
+ for (i = 0; i < LENGTH; i++)
+ if (*(addr + i) != (char)i) {
+ printf("Mismatch at %lu\n", i);
+ return 1;
+ }
+ return 0;
+}
+
+int main(void)
+{
+ void *addr;
+ int ret;
+
+ addr = mmap(ADDR, LENGTH, PROTECTION, FLAGS, 0, 0);
+ if (addr == MAP_FAILED) {
+ perror("mmap");
+ exit(1);
+ }
+
+ printf("Returned address is %p\n", addr);
+ check_bytes(addr);
+ write_bytes(addr);
+ ret = read_bytes(addr);
+
+ /* munmap() length of MAP_HUGETLB memory must be hugepage aligned */
+ if (munmap(addr, LENGTH)) {
+ perror("munmap");
+ exit(1);
+ }
+
+ return ret;
+}
diff --git a/kernel/tools/testing/selftests/vm/run_vmtests b/kernel/tools/testing/selftests/vm/run_vmtests
new file mode 100755
index 000000000..c87b68123
--- /dev/null
+++ b/kernel/tools/testing/selftests/vm/run_vmtests
@@ -0,0 +1,93 @@
+#!/bin/bash
+#please run as root
+
+#we need 256M, below is the size in kB
+needmem=262144
+mnt=./huge
+exitcode=0
+
+#get pagesize and freepages from /proc/meminfo
+while read name size unit; do
+ if [ "$name" = "HugePages_Free:" ]; then
+ freepgs=$size
+ fi
+ if [ "$name" = "Hugepagesize:" ]; then
+ pgsize=$size
+ fi
+done < /proc/meminfo
+
+#set proper nr_hugepages
+if [ -n "$freepgs" ] && [ -n "$pgsize" ]; then
+ nr_hugepgs=`cat /proc/sys/vm/nr_hugepages`
+ needpgs=`expr $needmem / $pgsize`
+ if [ $freepgs -lt $needpgs ]; then
+ lackpgs=$(( $needpgs - $freepgs ))
+ echo $(( $lackpgs + $nr_hugepgs )) > /proc/sys/vm/nr_hugepages
+ if [ $? -ne 0 ]; then
+ echo "Please run this test as root"
+ exit 1
+ fi
+ fi
+else
+ echo "no hugetlbfs support in kernel?"
+ exit 1
+fi
+
+mkdir $mnt
+mount -t hugetlbfs none $mnt
+
+echo "--------------------"
+echo "running hugepage-mmap"
+echo "--------------------"
+./hugepage-mmap
+if [ $? -ne 0 ]; then
+ echo "[FAIL]"
+ exitcode=1
+else
+ echo "[PASS]"
+fi
+
+shmmax=`cat /proc/sys/kernel/shmmax`
+shmall=`cat /proc/sys/kernel/shmall`
+echo 268435456 > /proc/sys/kernel/shmmax
+echo 4194304 > /proc/sys/kernel/shmall
+echo "--------------------"
+echo "running hugepage-shm"
+echo "--------------------"
+./hugepage-shm
+if [ $? -ne 0 ]; then
+ echo "[FAIL]"
+ exitcode=1
+else
+ echo "[PASS]"
+fi
+echo $shmmax > /proc/sys/kernel/shmmax
+echo $shmall > /proc/sys/kernel/shmall
+
+echo "--------------------"
+echo "running map_hugetlb"
+echo "--------------------"
+./map_hugetlb
+if [ $? -ne 0 ]; then
+ echo "[FAIL]"
+ exitcode=1
+else
+ echo "[PASS]"
+fi
+
+echo "--------------------"
+echo "running hugetlbfstest"
+echo "--------------------"
+./hugetlbfstest
+if [ $? -ne 0 ]; then
+ echo "[FAIL]"
+ exitcode=1
+else
+ echo "[PASS]"
+fi
+
+#cleanup
+umount $mnt
+rm -rf $mnt
+echo $nr_hugepgs > /proc/sys/vm/nr_hugepages
+exit $exitcode
diff --git a/kernel/tools/testing/selftests/vm/thuge-gen.c b/kernel/tools/testing/selftests/vm/thuge-gen.c
new file mode 100644
index 000000000..c87957295
--- /dev/null
+++ b/kernel/tools/testing/selftests/vm/thuge-gen.c
@@ -0,0 +1,254 @@
+/* Test selecting other page sizes for mmap/shmget.
+
+ Before running this huge pages for each huge page size must have been
+ reserved.
+ For large pages beyond MAX_ORDER (like 1GB on x86) boot options must be used.
+ Also shmmax must be increased.
+ And you need to run as root to work around some weird permissions in shm.
+ And nothing using huge pages should run in parallel.
+ When the program aborts you may need to clean up the shm segments with
+ ipcrm -m by hand, like this
+ sudo ipcs | awk '$1 == "0x00000000" {print $2}' | xargs -n1 sudo ipcrm -m
+ (warning this will remove all if someone else uses them) */
+
+#define _GNU_SOURCE 1
+#include <sys/mman.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <sys/ipc.h>
+#include <sys/shm.h>
+#include <sys/stat.h>
+#include <glob.h>
+#include <assert.h>
+#include <unistd.h>
+#include <stdarg.h>
+#include <string.h>
+
+#define err(x) perror(x), exit(1)
+
+#define MAP_HUGE_2MB (21 << MAP_HUGE_SHIFT)
+#define MAP_HUGE_1GB (30 << MAP_HUGE_SHIFT)
+#define MAP_HUGE_SHIFT 26
+#define MAP_HUGE_MASK 0x3f
+#define MAP_HUGETLB 0x40000
+
+#define SHM_HUGETLB 04000 /* segment will use huge TLB pages */
+#define SHM_HUGE_SHIFT 26
+#define SHM_HUGE_MASK 0x3f
+#define SHM_HUGE_2MB (21 << SHM_HUGE_SHIFT)
+#define SHM_HUGE_1GB (30 << SHM_HUGE_SHIFT)
+
+#define NUM_PAGESIZES 5
+
+#define NUM_PAGES 4
+
+#define Dprintf(fmt...) // printf(fmt)
+
+unsigned long page_sizes[NUM_PAGESIZES];
+int num_page_sizes;
+
+int ilog2(unsigned long v)
+{
+ int l = 0;
+ while ((1UL << l) < v)
+ l++;
+ return l;
+}
+
+void find_pagesizes(void)
+{
+ glob_t g;
+ int i;
+ glob("/sys/kernel/mm/hugepages/hugepages-*kB", 0, NULL, &g);
+ assert(g.gl_pathc <= NUM_PAGESIZES);
+ for (i = 0; i < g.gl_pathc; i++) {
+ sscanf(g.gl_pathv[i], "/sys/kernel/mm/hugepages/hugepages-%lukB",
+ &page_sizes[i]);
+ page_sizes[i] <<= 10;
+ printf("Found %luMB\n", page_sizes[i] >> 20);
+ }
+ num_page_sizes = g.gl_pathc;
+ globfree(&g);
+}
+
+unsigned long default_huge_page_size(void)
+{
+ unsigned long hps = 0;
+ char *line = NULL;
+ size_t linelen = 0;
+ FILE *f = fopen("/proc/meminfo", "r");
+ if (!f)
+ return 0;
+ while (getline(&line, &linelen, f) > 0) {
+ if (sscanf(line, "Hugepagesize: %lu kB", &hps) == 1) {
+ hps <<= 10;
+ break;
+ }
+ }
+ free(line);
+ return hps;
+}
+
+void show(unsigned long ps)
+{
+ char buf[100];
+ if (ps == getpagesize())
+ return;
+ printf("%luMB: ", ps >> 20);
+ fflush(stdout);
+ snprintf(buf, sizeof buf,
+ "cat /sys/kernel/mm/hugepages/hugepages-%lukB/free_hugepages",
+ ps >> 10);
+ system(buf);
+}
+
+unsigned long read_sysfs(int warn, char *fmt, ...)
+{
+ char *line = NULL;
+ size_t linelen = 0;
+ char buf[100];
+ FILE *f;
+ va_list ap;
+ unsigned long val = 0;
+
+ va_start(ap, fmt);
+ vsnprintf(buf, sizeof buf, fmt, ap);
+ va_end(ap);
+
+ f = fopen(buf, "r");
+ if (!f) {
+ if (warn)
+ printf("missing %s\n", buf);
+ return 0;
+ }
+ if (getline(&line, &linelen, f) > 0) {
+ sscanf(line, "%lu", &val);
+ }
+ fclose(f);
+ free(line);
+ return val;
+}
+
+unsigned long read_free(unsigned long ps)
+{
+ return read_sysfs(ps != getpagesize(),
+ "/sys/kernel/mm/hugepages/hugepages-%lukB/free_hugepages",
+ ps >> 10);
+}
+
+void test_mmap(unsigned long size, unsigned flags)
+{
+ char *map;
+ unsigned long before, after;
+ int err;
+
+ before = read_free(size);
+ map = mmap(NULL, size*NUM_PAGES, PROT_READ|PROT_WRITE,
+ MAP_PRIVATE|MAP_ANONYMOUS|MAP_HUGETLB|flags, 0, 0);
+
+ if (map == (char *)-1) err("mmap");
+ memset(map, 0xff, size*NUM_PAGES);
+ after = read_free(size);
+ Dprintf("before %lu after %lu diff %ld size %lu\n",
+ before, after, before - after, size);
+ assert(size == getpagesize() || (before - after) == NUM_PAGES);
+ show(size);
+ err = munmap(map, size);
+ assert(!err);
+}
+
+void test_shmget(unsigned long size, unsigned flags)
+{
+ int id;
+ unsigned long before, after;
+ int err;
+
+ before = read_free(size);
+ id = shmget(IPC_PRIVATE, size * NUM_PAGES, IPC_CREAT|0600|flags);
+ if (id < 0) err("shmget");
+
+ struct shm_info i;
+ if (shmctl(id, SHM_INFO, (void *)&i) < 0) err("shmctl");
+ Dprintf("alloc %lu res %lu\n", i.shm_tot, i.shm_rss);
+
+
+ Dprintf("id %d\n", id);
+ char *map = shmat(id, NULL, 0600);
+ if (map == (char*)-1) err("shmat");
+
+ shmctl(id, IPC_RMID, NULL);
+
+ memset(map, 0xff, size*NUM_PAGES);
+ after = read_free(size);
+
+ Dprintf("before %lu after %lu diff %ld size %lu\n",
+ before, after, before - after, size);
+ assert(size == getpagesize() || (before - after) == NUM_PAGES);
+ show(size);
+ err = shmdt(map);
+ assert(!err);
+}
+
+void sanity_checks(void)
+{
+ int i;
+ unsigned long largest = getpagesize();
+
+ for (i = 0; i < num_page_sizes; i++) {
+ if (page_sizes[i] > largest)
+ largest = page_sizes[i];
+
+ if (read_free(page_sizes[i]) < NUM_PAGES) {
+ printf("Not enough huge pages for page size %lu MB, need %u\n",
+ page_sizes[i] >> 20,
+ NUM_PAGES);
+ exit(0);
+ }
+ }
+
+ if (read_sysfs(0, "/proc/sys/kernel/shmmax") < NUM_PAGES * largest) {
+ printf("Please do echo %lu > /proc/sys/kernel/shmmax", largest * NUM_PAGES);
+ exit(0);
+ }
+
+#if defined(__x86_64__)
+ if (largest != 1U<<30) {
+ printf("No GB pages available on x86-64\n"
+ "Please boot with hugepagesz=1G hugepages=%d\n", NUM_PAGES);
+ exit(0);
+ }
+#endif
+}
+
+int main(void)
+{
+ int i;
+ unsigned default_hps = default_huge_page_size();
+
+ find_pagesizes();
+
+ sanity_checks();
+
+ for (i = 0; i < num_page_sizes; i++) {
+ unsigned long ps = page_sizes[i];
+ int arg = ilog2(ps) << MAP_HUGE_SHIFT;
+ printf("Testing %luMB mmap with shift %x\n", ps >> 20, arg);
+ test_mmap(ps, MAP_HUGETLB | arg);
+ }
+ printf("Testing default huge mmap\n");
+ test_mmap(default_hps, SHM_HUGETLB);
+
+ puts("Testing non-huge shmget");
+ test_shmget(getpagesize(), 0);
+
+ for (i = 0; i < num_page_sizes; i++) {
+ unsigned long ps = page_sizes[i];
+ int arg = ilog2(ps) << SHM_HUGE_SHIFT;
+ printf("Testing %luMB shmget with shift %x\n", ps >> 20, arg);
+ test_shmget(ps, SHM_HUGETLB | arg);
+ }
+ puts("default huge shmget");
+ test_shmget(default_hps, SHM_HUGETLB);
+
+ return 0;
+}
diff --git a/kernel/tools/testing/selftests/vm/transhuge-stress.c b/kernel/tools/testing/selftests/vm/transhuge-stress.c
new file mode 100644
index 000000000..fd7f1b4a9
--- /dev/null
+++ b/kernel/tools/testing/selftests/vm/transhuge-stress.c
@@ -0,0 +1,144 @@
+/*
+ * Stress test for transparent huge pages, memory compaction and migration.
+ *
+ * Authors: Konstantin Khlebnikov <koct9i@gmail.com>
+ *
+ * This is free and unencumbered software released into the public domain.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <stdint.h>
+#include <err.h>
+#include <time.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <string.h>
+#include <sys/mman.h>
+
+#define PAGE_SHIFT 12
+#define HPAGE_SHIFT 21
+
+#define PAGE_SIZE (1 << PAGE_SHIFT)
+#define HPAGE_SIZE (1 << HPAGE_SHIFT)
+
+#define PAGEMAP_PRESENT(ent) (((ent) & (1ull << 63)) != 0)
+#define PAGEMAP_PFN(ent) ((ent) & ((1ull << 55) - 1))
+
+int pagemap_fd;
+
+int64_t allocate_transhuge(void *ptr)
+{
+ uint64_t ent[2];
+
+ /* drop pmd */
+ if (mmap(ptr, HPAGE_SIZE, PROT_READ | PROT_WRITE,
+ MAP_FIXED | MAP_ANONYMOUS |
+ MAP_NORESERVE | MAP_PRIVATE, -1, 0) != ptr)
+ errx(2, "mmap transhuge");
+
+ if (madvise(ptr, HPAGE_SIZE, MADV_HUGEPAGE))
+ err(2, "MADV_HUGEPAGE");
+
+ /* allocate transparent huge page */
+ *(volatile void **)ptr = ptr;
+
+ if (pread(pagemap_fd, ent, sizeof(ent),
+ (uintptr_t)ptr >> (PAGE_SHIFT - 3)) != sizeof(ent))
+ err(2, "read pagemap");
+
+ if (PAGEMAP_PRESENT(ent[0]) && PAGEMAP_PRESENT(ent[1]) &&
+ PAGEMAP_PFN(ent[0]) + 1 == PAGEMAP_PFN(ent[1]) &&
+ !(PAGEMAP_PFN(ent[0]) & ((1 << (HPAGE_SHIFT - PAGE_SHIFT)) - 1)))
+ return PAGEMAP_PFN(ent[0]);
+
+ return -1;
+}
+
+int main(int argc, char **argv)
+{
+ size_t ram, len;
+ void *ptr, *p;
+ struct timespec a, b;
+ double s;
+ uint8_t *map;
+ size_t map_len;
+
+ ram = sysconf(_SC_PHYS_PAGES);
+ if (ram > SIZE_MAX / sysconf(_SC_PAGESIZE) / 4)
+ ram = SIZE_MAX / 4;
+ else
+ ram *= sysconf(_SC_PAGESIZE);
+
+ if (argc == 1)
+ len = ram;
+ else if (!strcmp(argv[1], "-h"))
+ errx(1, "usage: %s [size in MiB]", argv[0]);
+ else
+ len = atoll(argv[1]) << 20;
+
+ warnx("allocate %zd transhuge pages, using %zd MiB virtual memory"
+ " and %zd MiB of ram", len >> HPAGE_SHIFT, len >> 20,
+ len >> (20 + HPAGE_SHIFT - PAGE_SHIFT - 1));
+
+ pagemap_fd = open("/proc/self/pagemap", O_RDONLY);
+ if (pagemap_fd < 0)
+ err(2, "open pagemap");
+
+ len -= len % HPAGE_SIZE;
+ ptr = mmap(NULL, len + HPAGE_SIZE, PROT_READ | PROT_WRITE,
+ MAP_ANONYMOUS | MAP_NORESERVE | MAP_PRIVATE, -1, 0);
+ if (ptr == MAP_FAILED)
+ err(2, "initial mmap");
+ ptr += HPAGE_SIZE - (uintptr_t)ptr % HPAGE_SIZE;
+
+ if (madvise(ptr, len, MADV_HUGEPAGE))
+ err(2, "MADV_HUGEPAGE");
+
+ map_len = ram >> (HPAGE_SHIFT - 1);
+ map = malloc(map_len);
+ if (!map)
+ errx(2, "map malloc");
+
+ while (1) {
+ int nr_succeed = 0, nr_failed = 0, nr_pages = 0;
+
+ memset(map, 0, map_len);
+
+ clock_gettime(CLOCK_MONOTONIC, &a);
+ for (p = ptr; p < ptr + len; p += HPAGE_SIZE) {
+ int64_t pfn;
+
+ pfn = allocate_transhuge(p);
+
+ if (pfn < 0) {
+ nr_failed++;
+ } else {
+ size_t idx = pfn >> (HPAGE_SHIFT - PAGE_SHIFT);
+
+ nr_succeed++;
+ if (idx >= map_len) {
+ map = realloc(map, idx + 1);
+ if (!map)
+ errx(2, "map realloc");
+ memset(map + map_len, 0, idx + 1 - map_len);
+ map_len = idx + 1;
+ }
+ if (!map[idx])
+ nr_pages++;
+ map[idx] = 1;
+ }
+
+ /* split transhuge page, keep last page */
+ if (madvise(p, HPAGE_SIZE - PAGE_SIZE, MADV_DONTNEED))
+ err(2, "MADV_DONTNEED");
+ }
+ clock_gettime(CLOCK_MONOTONIC, &b);
+ s = b.tv_sec - a.tv_sec + (b.tv_nsec - a.tv_nsec) / 1000000000.;
+
+ warnx("%.3f s/loop, %.3f ms/page, %10.3f MiB/s\t"
+ "%4d succeed, %4d failed, %4d different pages",
+ s, s * 1000 / (len >> HPAGE_SHIFT), len / s / (1 << 20),
+ nr_succeed, nr_failed, nr_pages);
+ }
+}
diff --git a/kernel/tools/testing/selftests/x86/.gitignore b/kernel/tools/testing/selftests/x86/.gitignore
new file mode 100644
index 000000000..15034fef9
--- /dev/null
+++ b/kernel/tools/testing/selftests/x86/.gitignore
@@ -0,0 +1,2 @@
+*_32
+*_64
diff --git a/kernel/tools/testing/selftests/x86/Makefile b/kernel/tools/testing/selftests/x86/Makefile
new file mode 100644
index 000000000..9b0d8baf2
--- /dev/null
+++ b/kernel/tools/testing/selftests/x86/Makefile
@@ -0,0 +1,59 @@
+all:
+
+include ../lib.mk
+
+.PHONY: all all_32 all_64 warn_32bit_failure clean
+
+TARGETS_C_BOTHBITS := sigreturn single_step_syscall
+TARGETS_C_32BIT_ONLY := entry_from_vm86
+
+TARGETS_C_32BIT_ALL := $(TARGETS_C_BOTHBITS) $(TARGETS_C_32BIT_ONLY)
+BINARIES_32 := $(TARGETS_C_32BIT_ALL:%=%_32)
+BINARIES_64 := $(TARGETS_C_BOTHBITS:%=%_64)
+
+CFLAGS := -O2 -g -std=gnu99 -pthread -Wall
+
+UNAME_M := $(shell uname -m)
+CAN_BUILD_I386 := $(shell ./check_cc.sh $(CC) trivial_32bit_program.c -m32)
+CAN_BUILD_X86_64 := $(shell ./check_cc.sh $(CC) trivial_64bit_program.c)
+
+ifeq ($(CAN_BUILD_I386),1)
+all: all_32
+TEST_PROGS += $(BINARIES_32)
+endif
+
+ifeq ($(CAN_BUILD_X86_64),1)
+all: all_64
+TEST_PROGS += $(BINARIES_64)
+endif
+
+all_32: $(BINARIES_32)
+
+all_64: $(BINARIES_64)
+
+clean:
+ $(RM) $(BINARIES_32) $(BINARIES_64)
+
+$(TARGETS_C_32BIT_ALL:%=%_32): %_32: %.c
+ $(CC) -m32 -o $@ $(CFLAGS) $(EXTRA_CFLAGS) $^ -lrt -ldl
+
+$(TARGETS_C_BOTHBITS:%=%_64): %_64: %.c
+ $(CC) -m64 -o $@ $(CFLAGS) $(EXTRA_CFLAGS) $^ -lrt -ldl
+
+# x86_64 users should be encouraged to install 32-bit libraries
+ifeq ($(CAN_BUILD_I386)$(CAN_BUILD_X86_64),01)
+all: warn_32bit_failure
+
+warn_32bit_failure:
+ @echo "Warning: you seem to have a broken 32-bit build" 2>&1; \
+ echo "environment. This will reduce test coverage of 64-bit" 2>&1; \
+ echo "kernels. If you are using a Debian-like distribution," 2>&1; \
+ echo "try:"; 2>&1; \
+ echo ""; \
+ echo " apt-get install gcc-multilib libc6-i386 libc6-dev-i386"; \
+ echo ""; \
+ echo "If you are using a Fedora-like distribution, try:"; \
+ echo ""; \
+ echo " yum install glibc-devel.*i686"; \
+ exit 0;
+endif
diff --git a/kernel/tools/testing/selftests/x86/check_cc.sh b/kernel/tools/testing/selftests/x86/check_cc.sh
new file mode 100755
index 000000000..172d3293f
--- /dev/null
+++ b/kernel/tools/testing/selftests/x86/check_cc.sh
@@ -0,0 +1,16 @@
+#!/bin/sh
+# check_cc.sh - Helper to test userspace compilation support
+# Copyright (c) 2015 Andrew Lutomirski
+# GPL v2
+
+CC="$1"
+TESTPROG="$2"
+shift 2
+
+if "$CC" -o /dev/null "$TESTPROG" -O0 "$@" 2>/dev/null; then
+ echo 1
+else
+ echo 0
+fi
+
+exit 0
diff --git a/kernel/tools/testing/selftests/x86/entry_from_vm86.c b/kernel/tools/testing/selftests/x86/entry_from_vm86.c
new file mode 100644
index 000000000..5c38a1876
--- /dev/null
+++ b/kernel/tools/testing/selftests/x86/entry_from_vm86.c
@@ -0,0 +1,114 @@
+/*
+ * entry_from_vm86.c - tests kernel entries from vm86 mode
+ * Copyright (c) 2014-2015 Andrew Lutomirski
+ *
+ * This exercises a few paths that need to special-case vm86 mode.
+ *
+ * GPL v2.
+ */
+
+#define _GNU_SOURCE
+
+#include <assert.h>
+#include <stdlib.h>
+#include <sys/syscall.h>
+#include <sys/signal.h>
+#include <sys/ucontext.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+#include <sys/mman.h>
+#include <err.h>
+#include <stddef.h>
+#include <stdbool.h>
+#include <errno.h>
+#include <sys/vm86.h>
+
+static unsigned long load_addr = 0x10000;
+static int nerrs = 0;
+
+asm (
+ ".pushsection .rodata\n\t"
+ ".type vmcode_bound, @object\n\t"
+ "vmcode:\n\t"
+ "vmcode_bound:\n\t"
+ ".code16\n\t"
+ "bound %ax, (2048)\n\t"
+ "int3\n\t"
+ "vmcode_sysenter:\n\t"
+ "sysenter\n\t"
+ ".size vmcode, . - vmcode\n\t"
+ "end_vmcode:\n\t"
+ ".code32\n\t"
+ ".popsection"
+ );
+
+extern unsigned char vmcode[], end_vmcode[];
+extern unsigned char vmcode_bound[], vmcode_sysenter[];
+
+static void do_test(struct vm86plus_struct *v86, unsigned long eip,
+ const char *text)
+{
+ long ret;
+
+ printf("[RUN]\t%s from vm86 mode\n", text);
+ v86->regs.eip = eip;
+ ret = vm86(VM86_ENTER, v86);
+
+ if (ret == -1 && errno == ENOSYS) {
+ printf("[SKIP]\tvm86 not supported\n");
+ return;
+ }
+
+ if (VM86_TYPE(ret) == VM86_INTx) {
+ char trapname[32];
+ int trapno = VM86_ARG(ret);
+ if (trapno == 13)
+ strcpy(trapname, "GP");
+ else if (trapno == 5)
+ strcpy(trapname, "BR");
+ else if (trapno == 14)
+ strcpy(trapname, "PF");
+ else
+ sprintf(trapname, "%d", trapno);
+
+ printf("[OK]\tExited vm86 mode due to #%s\n", trapname);
+ } else if (VM86_TYPE(ret) == VM86_UNKNOWN) {
+ printf("[OK]\tExited vm86 mode due to unhandled GP fault\n");
+ } else {
+ printf("[OK]\tExited vm86 mode due to type %ld, arg %ld\n",
+ VM86_TYPE(ret), VM86_ARG(ret));
+ }
+}
+
+int main(void)
+{
+ struct vm86plus_struct v86;
+ unsigned char *addr = mmap((void *)load_addr, 4096,
+ PROT_READ | PROT_WRITE | PROT_EXEC,
+ MAP_ANONYMOUS | MAP_PRIVATE, -1,0);
+ if (addr != (unsigned char *)load_addr)
+ err(1, "mmap");
+
+ memcpy(addr, vmcode, end_vmcode - vmcode);
+ addr[2048] = 2;
+ addr[2050] = 3;
+
+ memset(&v86, 0, sizeof(v86));
+
+ v86.regs.cs = load_addr / 16;
+ v86.regs.ss = load_addr / 16;
+ v86.regs.ds = load_addr / 16;
+ v86.regs.es = load_addr / 16;
+
+ assert((v86.regs.cs & 3) == 0); /* Looks like RPL = 0 */
+
+ /* #BR -- should deliver SIG??? */
+ do_test(&v86, vmcode_bound - vmcode, "#BR");
+
+ /* SYSENTER -- should cause #GP or #UD depending on CPU */
+ do_test(&v86, vmcode_sysenter - vmcode, "SYSENTER");
+
+ return (nerrs == 0 ? 0 : 1);
+}
diff --git a/kernel/tools/testing/selftests/x86/sigreturn.c b/kernel/tools/testing/selftests/x86/sigreturn.c
new file mode 100644
index 000000000..b5aa1bab7
--- /dev/null
+++ b/kernel/tools/testing/selftests/x86/sigreturn.c
@@ -0,0 +1,684 @@
+/*
+ * sigreturn.c - tests for x86 sigreturn(2) and exit-to-userspace
+ * Copyright (c) 2014-2015 Andrew Lutomirski
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * This is a series of tests that exercises the sigreturn(2) syscall and
+ * the IRET / SYSRET paths in the kernel.
+ *
+ * For now, this focuses on the effects of unusual CS and SS values,
+ * and it has a bunch of tests to make sure that ESP/RSP is restored
+ * properly.
+ *
+ * The basic idea behind these tests is to raise(SIGUSR1) to create a
+ * sigcontext frame, plug in the values to be tested, and then return,
+ * which implicitly invokes sigreturn(2) and programs the user context
+ * as desired.
+ *
+ * For tests for which we expect sigreturn and the subsequent return to
+ * user mode to succeed, we return to a short trampoline that generates
+ * SIGTRAP so that the meat of the tests can be ordinary C code in a
+ * SIGTRAP handler.
+ *
+ * The inner workings of each test is documented below.
+ *
+ * Do not run on outdated, unpatched kernels at risk of nasty crashes.
+ */
+
+#define _GNU_SOURCE
+
+#include <sys/time.h>
+#include <time.h>
+#include <stdlib.h>
+#include <sys/syscall.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+#include <sys/mman.h>
+#include <sys/signal.h>
+#include <sys/ucontext.h>
+#include <asm/ldt.h>
+#include <err.h>
+#include <setjmp.h>
+#include <stddef.h>
+#include <stdbool.h>
+#include <sys/ptrace.h>
+#include <sys/user.h>
+
+/*
+ * In principle, this test can run on Linux emulation layers (e.g.
+ * Illumos "LX branded zones"). Solaris-based kernels reserve LDT
+ * entries 0-5 for their own internal purposes, so start our LDT
+ * allocations above that reservation. (The tests don't pass on LX
+ * branded zones, but at least this lets them run.)
+ */
+#define LDT_OFFSET 6
+
+/* An aligned stack accessible through some of our segments. */
+static unsigned char stack16[65536] __attribute__((aligned(4096)));
+
+/*
+ * An aligned int3 instruction used as a trampoline. Some of the tests
+ * want to fish out their ss values, so this trampoline copies ss to eax
+ * before the int3.
+ */
+asm (".pushsection .text\n\t"
+ ".type int3, @function\n\t"
+ ".align 4096\n\t"
+ "int3:\n\t"
+ "mov %ss,%eax\n\t"
+ "int3\n\t"
+ ".size int3, . - int3\n\t"
+ ".align 4096, 0xcc\n\t"
+ ".popsection");
+extern char int3[4096];
+
+/*
+ * At startup, we prepapre:
+ *
+ * - ldt_nonexistent_sel: An LDT entry that doesn't exist (all-zero
+ * descriptor or out of bounds).
+ * - code16_sel: A 16-bit LDT code segment pointing to int3.
+ * - data16_sel: A 16-bit LDT data segment pointing to stack16.
+ * - npcode32_sel: A 32-bit not-present LDT code segment pointing to int3.
+ * - npdata32_sel: A 32-bit not-present LDT data segment pointing to stack16.
+ * - gdt_data16_idx: A 16-bit GDT data segment pointing to stack16.
+ * - gdt_npdata32_idx: A 32-bit not-present GDT data segment pointing to
+ * stack16.
+ *
+ * For no particularly good reason, xyz_sel is a selector value with the
+ * RPL and LDT bits filled in, whereas xyz_idx is just an index into the
+ * descriptor table. These variables will be zero if their respective
+ * segments could not be allocated.
+ */
+static unsigned short ldt_nonexistent_sel;
+static unsigned short code16_sel, data16_sel, npcode32_sel, npdata32_sel;
+
+static unsigned short gdt_data16_idx, gdt_npdata32_idx;
+
+static unsigned short GDT3(int idx)
+{
+ return (idx << 3) | 3;
+}
+
+static unsigned short LDT3(int idx)
+{
+ return (idx << 3) | 7;
+}
+
+/* Our sigaltstack scratch space. */
+static char altstack_data[SIGSTKSZ];
+
+static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *),
+ int flags)
+{
+ struct sigaction sa;
+ memset(&sa, 0, sizeof(sa));
+ sa.sa_sigaction = handler;
+ sa.sa_flags = SA_SIGINFO | flags;
+ sigemptyset(&sa.sa_mask);
+ if (sigaction(sig, &sa, 0))
+ err(1, "sigaction");
+}
+
+static void clearhandler(int sig)
+{
+ struct sigaction sa;
+ memset(&sa, 0, sizeof(sa));
+ sa.sa_handler = SIG_DFL;
+ sigemptyset(&sa.sa_mask);
+ if (sigaction(sig, &sa, 0))
+ err(1, "sigaction");
+}
+
+static void add_ldt(const struct user_desc *desc, unsigned short *var,
+ const char *name)
+{
+ if (syscall(SYS_modify_ldt, 1, desc, sizeof(*desc)) == 0) {
+ *var = LDT3(desc->entry_number);
+ } else {
+ printf("[NOTE]\tFailed to create %s segment\n", name);
+ *var = 0;
+ }
+}
+
+static void setup_ldt(void)
+{
+ if ((unsigned long)stack16 > (1ULL << 32) - sizeof(stack16))
+ errx(1, "stack16 is too high\n");
+ if ((unsigned long)int3 > (1ULL << 32) - sizeof(int3))
+ errx(1, "int3 is too high\n");
+
+ ldt_nonexistent_sel = LDT3(LDT_OFFSET + 2);
+
+ const struct user_desc code16_desc = {
+ .entry_number = LDT_OFFSET + 0,
+ .base_addr = (unsigned long)int3,
+ .limit = 4095,
+ .seg_32bit = 0,
+ .contents = 2, /* Code, not conforming */
+ .read_exec_only = 0,
+ .limit_in_pages = 0,
+ .seg_not_present = 0,
+ .useable = 0
+ };
+ add_ldt(&code16_desc, &code16_sel, "code16");
+
+ const struct user_desc data16_desc = {
+ .entry_number = LDT_OFFSET + 1,
+ .base_addr = (unsigned long)stack16,
+ .limit = 0xffff,
+ .seg_32bit = 0,
+ .contents = 0, /* Data, grow-up */
+ .read_exec_only = 0,
+ .limit_in_pages = 0,
+ .seg_not_present = 0,
+ .useable = 0
+ };
+ add_ldt(&data16_desc, &data16_sel, "data16");
+
+ const struct user_desc npcode32_desc = {
+ .entry_number = LDT_OFFSET + 3,
+ .base_addr = (unsigned long)int3,
+ .limit = 4095,
+ .seg_32bit = 1,
+ .contents = 2, /* Code, not conforming */
+ .read_exec_only = 0,
+ .limit_in_pages = 0,
+ .seg_not_present = 1,
+ .useable = 0
+ };
+ add_ldt(&npcode32_desc, &npcode32_sel, "npcode32");
+
+ const struct user_desc npdata32_desc = {
+ .entry_number = LDT_OFFSET + 4,
+ .base_addr = (unsigned long)stack16,
+ .limit = 0xffff,
+ .seg_32bit = 1,
+ .contents = 0, /* Data, grow-up */
+ .read_exec_only = 0,
+ .limit_in_pages = 0,
+ .seg_not_present = 1,
+ .useable = 0
+ };
+ add_ldt(&npdata32_desc, &npdata32_sel, "npdata32");
+
+ struct user_desc gdt_data16_desc = {
+ .entry_number = -1,
+ .base_addr = (unsigned long)stack16,
+ .limit = 0xffff,
+ .seg_32bit = 0,
+ .contents = 0, /* Data, grow-up */
+ .read_exec_only = 0,
+ .limit_in_pages = 0,
+ .seg_not_present = 0,
+ .useable = 0
+ };
+
+ if (syscall(SYS_set_thread_area, &gdt_data16_desc) == 0) {
+ /*
+ * This probably indicates vulnerability to CVE-2014-8133.
+ * Merely getting here isn't definitive, though, and we'll
+ * diagnose the problem for real later on.
+ */
+ printf("[WARN]\tset_thread_area allocated data16 at index %d\n",
+ gdt_data16_desc.entry_number);
+ gdt_data16_idx = gdt_data16_desc.entry_number;
+ } else {
+ printf("[OK]\tset_thread_area refused 16-bit data\n");
+ }
+
+ struct user_desc gdt_npdata32_desc = {
+ .entry_number = -1,
+ .base_addr = (unsigned long)stack16,
+ .limit = 0xffff,
+ .seg_32bit = 1,
+ .contents = 0, /* Data, grow-up */
+ .read_exec_only = 0,
+ .limit_in_pages = 0,
+ .seg_not_present = 1,
+ .useable = 0
+ };
+
+ if (syscall(SYS_set_thread_area, &gdt_npdata32_desc) == 0) {
+ /*
+ * As a hardening measure, newer kernels don't allow this.
+ */
+ printf("[WARN]\tset_thread_area allocated npdata32 at index %d\n",
+ gdt_npdata32_desc.entry_number);
+ gdt_npdata32_idx = gdt_npdata32_desc.entry_number;
+ } else {
+ printf("[OK]\tset_thread_area refused 16-bit data\n");
+ }
+}
+
+/* State used by our signal handlers. */
+static gregset_t initial_regs, requested_regs, resulting_regs;
+
+/* Instructions for the SIGUSR1 handler. */
+static volatile unsigned short sig_cs, sig_ss;
+static volatile sig_atomic_t sig_trapped, sig_err, sig_trapno;
+
+/* Abstractions for some 32-bit vs 64-bit differences. */
+#ifdef __x86_64__
+# define REG_IP REG_RIP
+# define REG_SP REG_RSP
+# define REG_AX REG_RAX
+
+struct selectors {
+ unsigned short cs, gs, fs, ss;
+};
+
+static unsigned short *ssptr(ucontext_t *ctx)
+{
+ struct selectors *sels = (void *)&ctx->uc_mcontext.gregs[REG_CSGSFS];
+ return &sels->ss;
+}
+
+static unsigned short *csptr(ucontext_t *ctx)
+{
+ struct selectors *sels = (void *)&ctx->uc_mcontext.gregs[REG_CSGSFS];
+ return &sels->cs;
+}
+#else
+# define REG_IP REG_EIP
+# define REG_SP REG_ESP
+# define REG_AX REG_EAX
+
+static greg_t *ssptr(ucontext_t *ctx)
+{
+ return &ctx->uc_mcontext.gregs[REG_SS];
+}
+
+static greg_t *csptr(ucontext_t *ctx)
+{
+ return &ctx->uc_mcontext.gregs[REG_CS];
+}
+#endif
+
+/* Number of errors in the current test case. */
+static volatile sig_atomic_t nerrs;
+
+/*
+ * SIGUSR1 handler. Sets CS and SS as requested and points IP to the
+ * int3 trampoline. Sets SP to a large known value so that we can see
+ * whether the value round-trips back to user mode correctly.
+ */
+static void sigusr1(int sig, siginfo_t *info, void *ctx_void)
+{
+ ucontext_t *ctx = (ucontext_t*)ctx_void;
+
+ memcpy(&initial_regs, &ctx->uc_mcontext.gregs, sizeof(gregset_t));
+
+ *csptr(ctx) = sig_cs;
+ *ssptr(ctx) = sig_ss;
+
+ ctx->uc_mcontext.gregs[REG_IP] =
+ sig_cs == code16_sel ? 0 : (unsigned long)&int3;
+ ctx->uc_mcontext.gregs[REG_SP] = (unsigned long)0x8badf00d5aadc0deULL;
+ ctx->uc_mcontext.gregs[REG_AX] = 0;
+
+ memcpy(&requested_regs, &ctx->uc_mcontext.gregs, sizeof(gregset_t));
+ requested_regs[REG_AX] = *ssptr(ctx); /* The asm code does this. */
+
+ return;
+}
+
+/*
+ * Called after a successful sigreturn. Restores our state so that
+ * the original raise(SIGUSR1) returns.
+ */
+static void sigtrap(int sig, siginfo_t *info, void *ctx_void)
+{
+ ucontext_t *ctx = (ucontext_t*)ctx_void;
+
+ sig_err = ctx->uc_mcontext.gregs[REG_ERR];
+ sig_trapno = ctx->uc_mcontext.gregs[REG_TRAPNO];
+
+ unsigned short ss;
+ asm ("mov %%ss,%0" : "=r" (ss));
+
+ greg_t asm_ss = ctx->uc_mcontext.gregs[REG_AX];
+ if (asm_ss != sig_ss && sig == SIGTRAP) {
+ /* Sanity check failure. */
+ printf("[FAIL]\tSIGTRAP: ss = %hx, frame ss = %hx, ax = %llx\n",
+ ss, *ssptr(ctx), (unsigned long long)asm_ss);
+ nerrs++;
+ }
+
+ memcpy(&resulting_regs, &ctx->uc_mcontext.gregs, sizeof(gregset_t));
+ memcpy(&ctx->uc_mcontext.gregs, &initial_regs, sizeof(gregset_t));
+
+ sig_trapped = sig;
+}
+
+/*
+ * Checks a given selector for its code bitness or returns -1 if it's not
+ * a usable code segment selector.
+ */
+int cs_bitness(unsigned short cs)
+{
+ uint32_t valid = 0, ar;
+ asm ("lar %[cs], %[ar]\n\t"
+ "jnz 1f\n\t"
+ "mov $1, %[valid]\n\t"
+ "1:"
+ : [ar] "=r" (ar), [valid] "+rm" (valid)
+ : [cs] "r" (cs));
+
+ if (!valid)
+ return -1;
+
+ bool db = (ar & (1 << 22));
+ bool l = (ar & (1 << 21));
+
+ if (!(ar & (1<<11)))
+ return -1; /* Not code. */
+
+ if (l && !db)
+ return 64;
+ else if (!l && db)
+ return 32;
+ else if (!l && !db)
+ return 16;
+ else
+ return -1; /* Unknown bitness. */
+}
+
+/* Finds a usable code segment of the requested bitness. */
+int find_cs(int bitness)
+{
+ unsigned short my_cs;
+
+ asm ("mov %%cs,%0" : "=r" (my_cs));
+
+ if (cs_bitness(my_cs) == bitness)
+ return my_cs;
+ if (cs_bitness(my_cs + (2 << 3)) == bitness)
+ return my_cs + (2 << 3);
+ if (my_cs > (2<<3) && cs_bitness(my_cs - (2 << 3)) == bitness)
+ return my_cs - (2 << 3);
+ if (cs_bitness(code16_sel) == bitness)
+ return code16_sel;
+
+ printf("[WARN]\tCould not find %d-bit CS\n", bitness);
+ return -1;
+}
+
+static int test_valid_sigreturn(int cs_bits, bool use_16bit_ss, int force_ss)
+{
+ int cs = find_cs(cs_bits);
+ if (cs == -1) {
+ printf("[SKIP]\tCode segment unavailable for %d-bit CS, %d-bit SS\n",
+ cs_bits, use_16bit_ss ? 16 : 32);
+ return 0;
+ }
+
+ if (force_ss != -1) {
+ sig_ss = force_ss;
+ } else {
+ if (use_16bit_ss) {
+ if (!data16_sel) {
+ printf("[SKIP]\tData segment unavailable for %d-bit CS, 16-bit SS\n",
+ cs_bits);
+ return 0;
+ }
+ sig_ss = data16_sel;
+ } else {
+ asm volatile ("mov %%ss,%0" : "=r" (sig_ss));
+ }
+ }
+
+ sig_cs = cs;
+
+ printf("[RUN]\tValid sigreturn: %d-bit CS (%hx), %d-bit SS (%hx%s)\n",
+ cs_bits, sig_cs, use_16bit_ss ? 16 : 32, sig_ss,
+ (sig_ss & 4) ? "" : ", GDT");
+
+ raise(SIGUSR1);
+
+ nerrs = 0;
+
+ /*
+ * Check that each register had an acceptable value when the
+ * int3 trampoline was invoked.
+ */
+ for (int i = 0; i < NGREG; i++) {
+ greg_t req = requested_regs[i], res = resulting_regs[i];
+ if (i == REG_TRAPNO || i == REG_IP)
+ continue; /* don't care */
+ if (i == REG_SP) {
+ printf("\tSP: %llx -> %llx\n", (unsigned long long)req,
+ (unsigned long long)res);
+
+ /*
+ * In many circumstances, the high 32 bits of rsp
+ * are zeroed. For example, we could be a real
+ * 32-bit program, or we could hit any of a number
+ * of poorly-documented IRET or segmented ESP
+ * oddities. If this happens, it's okay.
+ */
+ if (res == (req & 0xFFFFFFFF))
+ continue; /* OK; not expected to work */
+ }
+
+ bool ignore_reg = false;
+#if __i386__
+ if (i == REG_UESP)
+ ignore_reg = true;
+#else
+ if (i == REG_CSGSFS) {
+ struct selectors *req_sels =
+ (void *)&requested_regs[REG_CSGSFS];
+ struct selectors *res_sels =
+ (void *)&resulting_regs[REG_CSGSFS];
+ if (req_sels->cs != res_sels->cs) {
+ printf("[FAIL]\tCS mismatch: requested 0x%hx; got 0x%hx\n",
+ req_sels->cs, res_sels->cs);
+ nerrs++;
+ }
+
+ if (req_sels->ss != res_sels->ss) {
+ printf("[FAIL]\tSS mismatch: requested 0x%hx; got 0x%hx\n",
+ req_sels->ss, res_sels->ss);
+ nerrs++;
+ }
+
+ continue;
+ }
+#endif
+
+ /* Sanity check on the kernel */
+ if (i == REG_AX && requested_regs[i] != resulting_regs[i]) {
+ printf("[FAIL]\tAX (saved SP) mismatch: requested 0x%llx; got 0x%llx\n",
+ (unsigned long long)requested_regs[i],
+ (unsigned long long)resulting_regs[i]);
+ nerrs++;
+ continue;
+ }
+
+ if (requested_regs[i] != resulting_regs[i] && !ignore_reg) {
+ /*
+ * SP is particularly interesting here. The
+ * usual cause of failures is that we hit the
+ * nasty IRET case of returning to a 16-bit SS,
+ * in which case bits 16:31 of the *kernel*
+ * stack pointer persist in ESP.
+ */
+ printf("[FAIL]\tReg %d mismatch: requested 0x%llx; got 0x%llx\n",
+ i, (unsigned long long)requested_regs[i],
+ (unsigned long long)resulting_regs[i]);
+ nerrs++;
+ }
+ }
+
+ if (nerrs == 0)
+ printf("[OK]\tall registers okay\n");
+
+ return nerrs;
+}
+
+static int test_bad_iret(int cs_bits, unsigned short ss, int force_cs)
+{
+ int cs = force_cs == -1 ? find_cs(cs_bits) : force_cs;
+ if (cs == -1)
+ return 0;
+
+ sig_cs = cs;
+ sig_ss = ss;
+
+ printf("[RUN]\t%d-bit CS (%hx), bogus SS (%hx)\n",
+ cs_bits, sig_cs, sig_ss);
+
+ sig_trapped = 0;
+ raise(SIGUSR1);
+ if (sig_trapped) {
+ char errdesc[32] = "";
+ if (sig_err) {
+ const char *src = (sig_err & 1) ? " EXT" : "";
+ const char *table;
+ if ((sig_err & 0x6) == 0x0)
+ table = "GDT";
+ else if ((sig_err & 0x6) == 0x4)
+ table = "LDT";
+ else if ((sig_err & 0x6) == 0x2)
+ table = "IDT";
+ else
+ table = "???";
+
+ sprintf(errdesc, "%s%s index %d, ",
+ table, src, sig_err >> 3);
+ }
+
+ char trapname[32];
+ if (sig_trapno == 13)
+ strcpy(trapname, "GP");
+ else if (sig_trapno == 11)
+ strcpy(trapname, "NP");
+ else if (sig_trapno == 12)
+ strcpy(trapname, "SS");
+ else if (sig_trapno == 32)
+ strcpy(trapname, "IRET"); /* X86_TRAP_IRET */
+ else
+ sprintf(trapname, "%d", sig_trapno);
+
+ printf("[OK]\tGot #%s(0x%lx) (i.e. %s%s)\n",
+ trapname, (unsigned long)sig_err,
+ errdesc, strsignal(sig_trapped));
+ return 0;
+ } else {
+ printf("[FAIL]\tDid not get SIGSEGV\n");
+ return 1;
+ }
+}
+
+int main()
+{
+ int total_nerrs = 0;
+ unsigned short my_cs, my_ss;
+
+ asm volatile ("mov %%cs,%0" : "=r" (my_cs));
+ asm volatile ("mov %%ss,%0" : "=r" (my_ss));
+ setup_ldt();
+
+ stack_t stack = {
+ .ss_sp = altstack_data,
+ .ss_size = SIGSTKSZ,
+ };
+ if (sigaltstack(&stack, NULL) != 0)
+ err(1, "sigaltstack");
+
+ sethandler(SIGUSR1, sigusr1, 0);
+ sethandler(SIGTRAP, sigtrap, SA_ONSTACK);
+
+ /* Easy cases: return to a 32-bit SS in each possible CS bitness. */
+ total_nerrs += test_valid_sigreturn(64, false, -1);
+ total_nerrs += test_valid_sigreturn(32, false, -1);
+ total_nerrs += test_valid_sigreturn(16, false, -1);
+
+ /*
+ * Test easy espfix cases: return to a 16-bit LDT SS in each possible
+ * CS bitness. NB: with a long mode CS, the SS bitness is irrelevant.
+ *
+ * This catches the original missing-espfix-on-64-bit-kernels issue
+ * as well as CVE-2014-8134.
+ */
+ total_nerrs += test_valid_sigreturn(64, true, -1);
+ total_nerrs += test_valid_sigreturn(32, true, -1);
+ total_nerrs += test_valid_sigreturn(16, true, -1);
+
+ if (gdt_data16_idx) {
+ /*
+ * For performance reasons, Linux skips espfix if SS points
+ * to the GDT. If we were able to allocate a 16-bit SS in
+ * the GDT, see if it leaks parts of the kernel stack pointer.
+ *
+ * This tests for CVE-2014-8133.
+ */
+ total_nerrs += test_valid_sigreturn(64, true,
+ GDT3(gdt_data16_idx));
+ total_nerrs += test_valid_sigreturn(32, true,
+ GDT3(gdt_data16_idx));
+ total_nerrs += test_valid_sigreturn(16, true,
+ GDT3(gdt_data16_idx));
+ }
+
+ /*
+ * We're done testing valid sigreturn cases. Now we test states
+ * for which sigreturn itself will succeed but the subsequent
+ * entry to user mode will fail.
+ *
+ * Depending on the failure mode and the kernel bitness, these
+ * entry failures can generate SIGSEGV, SIGBUS, or SIGILL.
+ */
+ clearhandler(SIGTRAP);
+ sethandler(SIGSEGV, sigtrap, SA_ONSTACK);
+ sethandler(SIGBUS, sigtrap, SA_ONSTACK);
+ sethandler(SIGILL, sigtrap, SA_ONSTACK); /* 32-bit kernels do this */
+
+ /* Easy failures: invalid SS, resulting in #GP(0) */
+ test_bad_iret(64, ldt_nonexistent_sel, -1);
+ test_bad_iret(32, ldt_nonexistent_sel, -1);
+ test_bad_iret(16, ldt_nonexistent_sel, -1);
+
+ /* These fail because SS isn't a data segment, resulting in #GP(SS) */
+ test_bad_iret(64, my_cs, -1);
+ test_bad_iret(32, my_cs, -1);
+ test_bad_iret(16, my_cs, -1);
+
+ /* Try to return to a not-present code segment, triggering #NP(SS). */
+ test_bad_iret(32, my_ss, npcode32_sel);
+
+ /*
+ * Try to return to a not-present but otherwise valid data segment.
+ * This will cause IRET to fail with #SS on the espfix stack. This
+ * exercises CVE-2014-9322.
+ *
+ * Note that, if espfix is enabled, 64-bit Linux will lose track
+ * of the actual cause of failure and report #GP(0) instead.
+ * This would be very difficult for Linux to avoid, because
+ * espfix64 causes IRET failures to be promoted to #DF, so the
+ * original exception frame is never pushed onto the stack.
+ */
+ test_bad_iret(32, npdata32_sel, -1);
+
+ /*
+ * Try to return to a not-present but otherwise valid data
+ * segment without invoking espfix. Newer kernels don't allow
+ * this to happen in the first place. On older kernels, though,
+ * this can trigger CVE-2014-9322.
+ */
+ if (gdt_npdata32_idx)
+ test_bad_iret(32, GDT3(gdt_npdata32_idx), -1);
+
+ return total_nerrs ? 1 : 0;
+}
diff --git a/kernel/tools/testing/selftests/x86/single_step_syscall.c b/kernel/tools/testing/selftests/x86/single_step_syscall.c
new file mode 100644
index 000000000..50c26358e
--- /dev/null
+++ b/kernel/tools/testing/selftests/x86/single_step_syscall.c
@@ -0,0 +1,181 @@
+/*
+ * single_step_syscall.c - single-steps various x86 syscalls
+ * Copyright (c) 2014-2015 Andrew Lutomirski
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * This is a very simple series of tests that makes system calls with
+ * the TF flag set. This exercises some nasty kernel code in the
+ * SYSENTER case: SYSENTER does not clear TF, so SYSENTER with TF set
+ * immediately issues #DB from CPL 0. This requires special handling in
+ * the kernel.
+ */
+
+#define _GNU_SOURCE
+
+#include <sys/time.h>
+#include <time.h>
+#include <stdlib.h>
+#include <sys/syscall.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+#include <sys/mman.h>
+#include <sys/signal.h>
+#include <sys/ucontext.h>
+#include <asm/ldt.h>
+#include <err.h>
+#include <setjmp.h>
+#include <stddef.h>
+#include <stdbool.h>
+#include <sys/ptrace.h>
+#include <sys/user.h>
+
+static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *),
+ int flags)
+{
+ struct sigaction sa;
+ memset(&sa, 0, sizeof(sa));
+ sa.sa_sigaction = handler;
+ sa.sa_flags = SA_SIGINFO | flags;
+ sigemptyset(&sa.sa_mask);
+ if (sigaction(sig, &sa, 0))
+ err(1, "sigaction");
+}
+
+static volatile sig_atomic_t sig_traps;
+
+#ifdef __x86_64__
+# define REG_IP REG_RIP
+# define WIDTH "q"
+#else
+# define REG_IP REG_EIP
+# define WIDTH "l"
+#endif
+
+static unsigned long get_eflags(void)
+{
+ unsigned long eflags;
+ asm volatile ("pushf" WIDTH "\n\tpop" WIDTH " %0" : "=rm" (eflags));
+ return eflags;
+}
+
+static void set_eflags(unsigned long eflags)
+{
+ asm volatile ("push" WIDTH " %0\n\tpopf" WIDTH
+ : : "rm" (eflags) : "flags");
+}
+
+#define X86_EFLAGS_TF (1UL << 8)
+
+static void sigtrap(int sig, siginfo_t *info, void *ctx_void)
+{
+ ucontext_t *ctx = (ucontext_t*)ctx_void;
+
+ if (get_eflags() & X86_EFLAGS_TF) {
+ set_eflags(get_eflags() & ~X86_EFLAGS_TF);
+ printf("[WARN]\tSIGTRAP handler had TF set\n");
+ _exit(1);
+ }
+
+ sig_traps++;
+
+ if (sig_traps == 10000 || sig_traps == 10001) {
+ printf("[WARN]\tHit %d SIGTRAPs with si_addr 0x%lx, ip 0x%lx\n",
+ (int)sig_traps,
+ (unsigned long)info->si_addr,
+ (unsigned long)ctx->uc_mcontext.gregs[REG_IP]);
+ }
+}
+
+static void check_result(void)
+{
+ unsigned long new_eflags = get_eflags();
+ set_eflags(new_eflags & ~X86_EFLAGS_TF);
+
+ if (!sig_traps) {
+ printf("[FAIL]\tNo SIGTRAP\n");
+ exit(1);
+ }
+
+ if (!(new_eflags & X86_EFLAGS_TF)) {
+ printf("[FAIL]\tTF was cleared\n");
+ exit(1);
+ }
+
+ printf("[OK]\tSurvived with TF set and %d traps\n", (int)sig_traps);
+ sig_traps = 0;
+}
+
+int main()
+{
+ int tmp;
+
+ sethandler(SIGTRAP, sigtrap, 0);
+
+ printf("[RUN]\tSet TF and check nop\n");
+ set_eflags(get_eflags() | X86_EFLAGS_TF);
+ asm volatile ("nop");
+ check_result();
+
+#ifdef __x86_64__
+ printf("[RUN]\tSet TF and check syscall-less opportunistic sysret\n");
+ set_eflags(get_eflags() | X86_EFLAGS_TF);
+ extern unsigned char post_nop[];
+ asm volatile ("pushf" WIDTH "\n\t"
+ "pop" WIDTH " %%r11\n\t"
+ "nop\n\t"
+ "post_nop:"
+ : : "c" (post_nop) : "r11");
+ check_result();
+#endif
+
+ printf("[RUN]\tSet TF and check int80\n");
+ set_eflags(get_eflags() | X86_EFLAGS_TF);
+ asm volatile ("int $0x80" : "=a" (tmp) : "a" (SYS_getpid));
+ check_result();
+
+ /*
+ * This test is particularly interesting if fast syscalls use
+ * SYSENTER: it triggers a nasty design flaw in SYSENTER.
+ * Specifically, SYSENTER does not clear TF, so either SYSENTER
+ * or the next instruction traps at CPL0. (Of course, Intel
+ * mostly forgot to document exactly what happens here.) So we
+ * get a CPL0 fault with usergs (on 64-bit kernels) and possibly
+ * no stack. The only sane way the kernel can possibly handle
+ * it is to clear TF on return from the #DB handler, but this
+ * happens way too early to set TF in the saved pt_regs, so the
+ * kernel has to do something clever to avoid losing track of
+ * the TF bit.
+ *
+ * Needless to say, we've had bugs in this area.
+ */
+ syscall(SYS_getpid); /* Force symbol binding without TF set. */
+ printf("[RUN]\tSet TF and check a fast syscall\n");
+ set_eflags(get_eflags() | X86_EFLAGS_TF);
+ syscall(SYS_getpid);
+ check_result();
+
+ /* Now make sure that another fast syscall doesn't set TF again. */
+ printf("[RUN]\tFast syscall with TF cleared\n");
+ fflush(stdout); /* Force a syscall */
+ if (get_eflags() & X86_EFLAGS_TF) {
+ printf("[FAIL]\tTF is now set\n");
+ exit(1);
+ }
+ if (sig_traps) {
+ printf("[FAIL]\tGot SIGTRAP\n");
+ exit(1);
+ }
+ printf("[OK]\tNothing unexpected happened\n");
+
+ return 0;
+}
diff --git a/kernel/tools/testing/selftests/x86/trivial_32bit_program.c b/kernel/tools/testing/selftests/x86/trivial_32bit_program.c
new file mode 100644
index 000000000..fabdf0f51
--- /dev/null
+++ b/kernel/tools/testing/selftests/x86/trivial_32bit_program.c
@@ -0,0 +1,18 @@
+/*
+ * Trivial program to check that we have a valid 32-bit build environment.
+ * Copyright (c) 2015 Andy Lutomirski
+ * GPL v2
+ */
+
+#ifndef __i386__
+# error wrong architecture
+#endif
+
+#include <stdio.h>
+
+int main()
+{
+ printf("\n");
+
+ return 0;
+}
diff --git a/kernel/tools/testing/selftests/x86/trivial_64bit_program.c b/kernel/tools/testing/selftests/x86/trivial_64bit_program.c
new file mode 100644
index 000000000..b994946c4
--- /dev/null
+++ b/kernel/tools/testing/selftests/x86/trivial_64bit_program.c
@@ -0,0 +1,18 @@
+/*
+ * Trivial program to check that we have a valid 32-bit build environment.
+ * Copyright (c) 2015 Andy Lutomirski
+ * GPL v2
+ */
+
+#ifndef __x86_64__
+# error wrong architecture
+#endif
+
+#include <stdio.h>
+
+int main()
+{
+ printf("\n");
+
+ return 0;
+}