summaryrefslogtreecommitdiffstats
path: root/kernel/tools/testing/ktest/ktest.pl
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/tools/testing/ktest/ktest.pl')
-rwxr-xr-xkernel/tools/testing/ktest/ktest.pl4387
1 files changed, 4387 insertions, 0 deletions
diff --git a/kernel/tools/testing/ktest/ktest.pl b/kernel/tools/testing/ktest/ktest.pl
new file mode 100755
index 000000000..d08e214ec
--- /dev/null
+++ b/kernel/tools/testing/ktest/ktest.pl
@@ -0,0 +1,4387 @@
+#!/usr/bin/perl -w
+#
+# Copyright 2010 - Steven Rostedt <srostedt@redhat.com>, Red Hat Inc.
+# Licensed under the terms of the GNU GPL License version 2
+#
+
+use strict;
+use IPC::Open2;
+use Fcntl qw(F_GETFL F_SETFL O_NONBLOCK);
+use File::Path qw(mkpath);
+use File::Copy qw(cp);
+use FileHandle;
+
+my $VERSION = "0.2";
+
+$| = 1;
+
+my %opt;
+my %repeat_tests;
+my %repeats;
+my %evals;
+
+#default opts
+my %default = (
+ "NUM_TESTS" => 1,
+ "TEST_TYPE" => "build",
+ "BUILD_TYPE" => "randconfig",
+ "MAKE_CMD" => "make",
+ "CLOSE_CONSOLE_SIGNAL" => "INT",
+ "TIMEOUT" => 120,
+ "TMP_DIR" => "/tmp/ktest/\${MACHINE}",
+ "SLEEP_TIME" => 60, # sleep time between tests
+ "BUILD_NOCLEAN" => 0,
+ "REBOOT_ON_ERROR" => 0,
+ "POWEROFF_ON_ERROR" => 0,
+ "REBOOT_ON_SUCCESS" => 1,
+ "POWEROFF_ON_SUCCESS" => 0,
+ "BUILD_OPTIONS" => "",
+ "BISECT_SLEEP_TIME" => 60, # sleep time between bisects
+ "PATCHCHECK_SLEEP_TIME" => 60, # sleep time between patch checks
+ "CLEAR_LOG" => 0,
+ "BISECT_MANUAL" => 0,
+ "BISECT_SKIP" => 1,
+ "BISECT_TRIES" => 1,
+ "MIN_CONFIG_TYPE" => "boot",
+ "SUCCESS_LINE" => "login:",
+ "DETECT_TRIPLE_FAULT" => 1,
+ "NO_INSTALL" => 0,
+ "BOOTED_TIMEOUT" => 1,
+ "DIE_ON_FAILURE" => 1,
+ "SSH_EXEC" => "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND",
+ "SCP_TO_TARGET" => "scp \$SRC_FILE \$SSH_USER\@\$MACHINE:\$DST_FILE",
+ "SCP_TO_TARGET_INSTALL" => "\${SCP_TO_TARGET}",
+ "REBOOT" => "ssh \$SSH_USER\@\$MACHINE reboot",
+ "STOP_AFTER_SUCCESS" => 10,
+ "STOP_AFTER_FAILURE" => 60,
+ "STOP_TEST_AFTER" => 600,
+ "MAX_MONITOR_WAIT" => 1800,
+ "GRUB_REBOOT" => "grub2-reboot",
+ "SYSLINUX" => "extlinux",
+ "SYSLINUX_PATH" => "/boot/extlinux",
+
+# required, and we will ask users if they don't have them but we keep the default
+# value something that is common.
+ "REBOOT_TYPE" => "grub",
+ "LOCALVERSION" => "-test",
+ "SSH_USER" => "root",
+ "BUILD_TARGET" => "arch/x86/boot/bzImage",
+ "TARGET_IMAGE" => "/boot/vmlinuz-test",
+
+ "LOG_FILE" => undef,
+ "IGNORE_UNUSED" => 0,
+);
+
+my $ktest_config = "ktest.conf";
+my $version;
+my $have_version = 0;
+my $machine;
+my $last_machine;
+my $ssh_user;
+my $tmpdir;
+my $builddir;
+my $outputdir;
+my $output_config;
+my $test_type;
+my $build_type;
+my $build_options;
+my $final_post_ktest;
+my $pre_ktest;
+my $post_ktest;
+my $pre_test;
+my $post_test;
+my $pre_build;
+my $post_build;
+my $pre_build_die;
+my $post_build_die;
+my $reboot_type;
+my $reboot_script;
+my $power_cycle;
+my $reboot;
+my $reboot_on_error;
+my $switch_to_good;
+my $switch_to_test;
+my $poweroff_on_error;
+my $reboot_on_success;
+my $die_on_failure;
+my $powercycle_after_reboot;
+my $poweroff_after_halt;
+my $max_monitor_wait;
+my $ssh_exec;
+my $scp_to_target;
+my $scp_to_target_install;
+my $power_off;
+my $grub_menu;
+my $last_grub_menu;
+my $grub_file;
+my $grub_number;
+my $grub_reboot;
+my $syslinux;
+my $syslinux_path;
+my $syslinux_label;
+my $target;
+my $make;
+my $pre_install;
+my $post_install;
+my $no_install;
+my $noclean;
+my $minconfig;
+my $start_minconfig;
+my $start_minconfig_defined;
+my $output_minconfig;
+my $minconfig_type;
+my $use_output_minconfig;
+my $warnings_file;
+my $ignore_config;
+my $ignore_errors;
+my $addconfig;
+my $in_bisect = 0;
+my $bisect_bad_commit = "";
+my $reverse_bisect;
+my $bisect_manual;
+my $bisect_skip;
+my $bisect_tries;
+my $config_bisect_good;
+my $bisect_ret_good;
+my $bisect_ret_bad;
+my $bisect_ret_skip;
+my $bisect_ret_abort;
+my $bisect_ret_default;
+my $in_patchcheck = 0;
+my $run_test;
+my $buildlog;
+my $testlog;
+my $dmesg;
+my $monitor_fp;
+my $monitor_pid;
+my $monitor_cnt = 0;
+my $sleep_time;
+my $bisect_sleep_time;
+my $patchcheck_sleep_time;
+my $ignore_warnings;
+my $store_failures;
+my $store_successes;
+my $test_name;
+my $timeout;
+my $booted_timeout;
+my $detect_triplefault;
+my $console;
+my $close_console_signal;
+my $reboot_success_line;
+my $success_line;
+my $stop_after_success;
+my $stop_after_failure;
+my $stop_test_after;
+my $build_target;
+my $target_image;
+my $checkout;
+my $localversion;
+my $iteration = 0;
+my $successes = 0;
+my $stty_orig;
+
+my $bisect_good;
+my $bisect_bad;
+my $bisect_type;
+my $bisect_start;
+my $bisect_replay;
+my $bisect_files;
+my $bisect_reverse;
+my $bisect_check;
+
+my $config_bisect;
+my $config_bisect_type;
+my $config_bisect_check;
+
+my $patchcheck_type;
+my $patchcheck_start;
+my $patchcheck_cherry;
+my $patchcheck_end;
+
+my $build_time;
+my $install_time;
+my $reboot_time;
+my $test_time;
+
+# set when a test is something other that just building or install
+# which would require more options.
+my $buildonly = 1;
+
+# tell build not to worry about warnings, even when WARNINGS_FILE is set
+my $warnings_ok = 0;
+
+# set when creating a new config
+my $newconfig = 0;
+
+my %entered_configs;
+my %config_help;
+my %variable;
+
+# force_config is the list of configs that we force enabled (or disabled)
+# in a .config file. The MIN_CONFIG and ADD_CONFIG configs.
+my %force_config;
+
+# do not force reboots on config problems
+my $no_reboot = 1;
+
+# reboot on success
+my $reboot_success = 0;
+
+my %option_map = (
+ "MACHINE" => \$machine,
+ "SSH_USER" => \$ssh_user,
+ "TMP_DIR" => \$tmpdir,
+ "OUTPUT_DIR" => \$outputdir,
+ "BUILD_DIR" => \$builddir,
+ "TEST_TYPE" => \$test_type,
+ "PRE_KTEST" => \$pre_ktest,
+ "POST_KTEST" => \$post_ktest,
+ "PRE_TEST" => \$pre_test,
+ "POST_TEST" => \$post_test,
+ "BUILD_TYPE" => \$build_type,
+ "BUILD_OPTIONS" => \$build_options,
+ "PRE_BUILD" => \$pre_build,
+ "POST_BUILD" => \$post_build,
+ "PRE_BUILD_DIE" => \$pre_build_die,
+ "POST_BUILD_DIE" => \$post_build_die,
+ "POWER_CYCLE" => \$power_cycle,
+ "REBOOT" => \$reboot,
+ "BUILD_NOCLEAN" => \$noclean,
+ "MIN_CONFIG" => \$minconfig,
+ "OUTPUT_MIN_CONFIG" => \$output_minconfig,
+ "START_MIN_CONFIG" => \$start_minconfig,
+ "MIN_CONFIG_TYPE" => \$minconfig_type,
+ "USE_OUTPUT_MIN_CONFIG" => \$use_output_minconfig,
+ "WARNINGS_FILE" => \$warnings_file,
+ "IGNORE_CONFIG" => \$ignore_config,
+ "TEST" => \$run_test,
+ "ADD_CONFIG" => \$addconfig,
+ "REBOOT_TYPE" => \$reboot_type,
+ "GRUB_MENU" => \$grub_menu,
+ "GRUB_FILE" => \$grub_file,
+ "GRUB_REBOOT" => \$grub_reboot,
+ "SYSLINUX" => \$syslinux,
+ "SYSLINUX_PATH" => \$syslinux_path,
+ "SYSLINUX_LABEL" => \$syslinux_label,
+ "PRE_INSTALL" => \$pre_install,
+ "POST_INSTALL" => \$post_install,
+ "NO_INSTALL" => \$no_install,
+ "REBOOT_SCRIPT" => \$reboot_script,
+ "REBOOT_ON_ERROR" => \$reboot_on_error,
+ "SWITCH_TO_GOOD" => \$switch_to_good,
+ "SWITCH_TO_TEST" => \$switch_to_test,
+ "POWEROFF_ON_ERROR" => \$poweroff_on_error,
+ "REBOOT_ON_SUCCESS" => \$reboot_on_success,
+ "DIE_ON_FAILURE" => \$die_on_failure,
+ "POWER_OFF" => \$power_off,
+ "POWERCYCLE_AFTER_REBOOT" => \$powercycle_after_reboot,
+ "POWEROFF_AFTER_HALT" => \$poweroff_after_halt,
+ "MAX_MONITOR_WAIT" => \$max_monitor_wait,
+ "SLEEP_TIME" => \$sleep_time,
+ "BISECT_SLEEP_TIME" => \$bisect_sleep_time,
+ "PATCHCHECK_SLEEP_TIME" => \$patchcheck_sleep_time,
+ "IGNORE_WARNINGS" => \$ignore_warnings,
+ "IGNORE_ERRORS" => \$ignore_errors,
+ "BISECT_MANUAL" => \$bisect_manual,
+ "BISECT_SKIP" => \$bisect_skip,
+ "BISECT_TRIES" => \$bisect_tries,
+ "CONFIG_BISECT_GOOD" => \$config_bisect_good,
+ "BISECT_RET_GOOD" => \$bisect_ret_good,
+ "BISECT_RET_BAD" => \$bisect_ret_bad,
+ "BISECT_RET_SKIP" => \$bisect_ret_skip,
+ "BISECT_RET_ABORT" => \$bisect_ret_abort,
+ "BISECT_RET_DEFAULT" => \$bisect_ret_default,
+ "STORE_FAILURES" => \$store_failures,
+ "STORE_SUCCESSES" => \$store_successes,
+ "TEST_NAME" => \$test_name,
+ "TIMEOUT" => \$timeout,
+ "BOOTED_TIMEOUT" => \$booted_timeout,
+ "CONSOLE" => \$console,
+ "CLOSE_CONSOLE_SIGNAL" => \$close_console_signal,
+ "DETECT_TRIPLE_FAULT" => \$detect_triplefault,
+ "SUCCESS_LINE" => \$success_line,
+ "REBOOT_SUCCESS_LINE" => \$reboot_success_line,
+ "STOP_AFTER_SUCCESS" => \$stop_after_success,
+ "STOP_AFTER_FAILURE" => \$stop_after_failure,
+ "STOP_TEST_AFTER" => \$stop_test_after,
+ "BUILD_TARGET" => \$build_target,
+ "SSH_EXEC" => \$ssh_exec,
+ "SCP_TO_TARGET" => \$scp_to_target,
+ "SCP_TO_TARGET_INSTALL" => \$scp_to_target_install,
+ "CHECKOUT" => \$checkout,
+ "TARGET_IMAGE" => \$target_image,
+ "LOCALVERSION" => \$localversion,
+
+ "BISECT_GOOD" => \$bisect_good,
+ "BISECT_BAD" => \$bisect_bad,
+ "BISECT_TYPE" => \$bisect_type,
+ "BISECT_START" => \$bisect_start,
+ "BISECT_REPLAY" => \$bisect_replay,
+ "BISECT_FILES" => \$bisect_files,
+ "BISECT_REVERSE" => \$bisect_reverse,
+ "BISECT_CHECK" => \$bisect_check,
+
+ "CONFIG_BISECT" => \$config_bisect,
+ "CONFIG_BISECT_TYPE" => \$config_bisect_type,
+ "CONFIG_BISECT_CHECK" => \$config_bisect_check,
+
+ "PATCHCHECK_TYPE" => \$patchcheck_type,
+ "PATCHCHECK_START" => \$patchcheck_start,
+ "PATCHCHECK_CHERRY" => \$patchcheck_cherry,
+ "PATCHCHECK_END" => \$patchcheck_end,
+);
+
+# Options may be used by other options, record them.
+my %used_options;
+
+# default variables that can be used
+chomp ($variable{"PWD"} = `pwd`);
+
+$config_help{"MACHINE"} = << "EOF"
+ The machine hostname that you will test.
+ For build only tests, it is still needed to differentiate log files.
+EOF
+ ;
+$config_help{"SSH_USER"} = << "EOF"
+ The box is expected to have ssh on normal bootup, provide the user
+ (most likely root, since you need privileged operations)
+EOF
+ ;
+$config_help{"BUILD_DIR"} = << "EOF"
+ The directory that contains the Linux source code (full path).
+ You can use \${PWD} that will be the path where ktest.pl is run, or use
+ \${THIS_DIR} which is assigned \${PWD} but may be changed later.
+EOF
+ ;
+$config_help{"OUTPUT_DIR"} = << "EOF"
+ The directory that the objects will be built (full path).
+ (can not be same as BUILD_DIR)
+ You can use \${PWD} that will be the path where ktest.pl is run, or use
+ \${THIS_DIR} which is assigned \${PWD} but may be changed later.
+EOF
+ ;
+$config_help{"BUILD_TARGET"} = << "EOF"
+ The location of the compiled file to copy to the target.
+ (relative to OUTPUT_DIR)
+EOF
+ ;
+$config_help{"BUILD_OPTIONS"} = << "EOF"
+ Options to add to \"make\" when building.
+ i.e. -j20
+EOF
+ ;
+$config_help{"TARGET_IMAGE"} = << "EOF"
+ The place to put your image on the test machine.
+EOF
+ ;
+$config_help{"POWER_CYCLE"} = << "EOF"
+ A script or command to reboot the box.
+
+ Here is a digital loggers power switch example
+ POWER_CYCLE = wget --no-proxy -O /dev/null -q --auth-no-challenge 'http://admin:admin\@power/outlet?5=CCL'
+
+ Here is an example to reboot a virtual box on the current host
+ with the name "Guest".
+ POWER_CYCLE = virsh destroy Guest; sleep 5; virsh start Guest
+EOF
+ ;
+$config_help{"CONSOLE"} = << "EOF"
+ The script or command that reads the console
+
+ If you use ttywatch server, something like the following would work.
+CONSOLE = nc -d localhost 3001
+
+ For a virtual machine with guest name "Guest".
+CONSOLE = virsh console Guest
+EOF
+ ;
+$config_help{"LOCALVERSION"} = << "EOF"
+ Required version ending to differentiate the test
+ from other linux builds on the system.
+EOF
+ ;
+$config_help{"REBOOT_TYPE"} = << "EOF"
+ Way to reboot the box to the test kernel.
+ Only valid options so far are "grub", "grub2", "syslinux", and "script".
+
+ If you specify grub, it will assume grub version 1
+ and will search in /boot/grub/menu.lst for the title \$GRUB_MENU
+ and select that target to reboot to the kernel. If this is not
+ your setup, then specify "script" and have a command or script
+ specified in REBOOT_SCRIPT to boot to the target.
+
+ The entry in /boot/grub/menu.lst must be entered in manually.
+ The test will not modify that file.
+
+ If you specify grub2, then you also need to specify both \$GRUB_MENU
+ and \$GRUB_FILE.
+
+ If you specify syslinux, then you may use SYSLINUX to define the syslinux
+ command (defaults to extlinux), and SYSLINUX_PATH to specify the path to
+ the syslinux install (defaults to /boot/extlinux). But you have to specify
+ SYSLINUX_LABEL to define the label to boot to for the test kernel.
+EOF
+ ;
+$config_help{"GRUB_MENU"} = << "EOF"
+ The grub title name for the test kernel to boot
+ (Only mandatory if REBOOT_TYPE = grub or grub2)
+
+ Note, ktest.pl will not update the grub menu.lst, you need to
+ manually add an option for the test. ktest.pl will search
+ the grub menu.lst for this option to find what kernel to
+ reboot into.
+
+ For example, if in the /boot/grub/menu.lst the test kernel title has:
+ title Test Kernel
+ kernel vmlinuz-test
+ GRUB_MENU = Test Kernel
+
+ For grub2, a search of \$GRUB_FILE is performed for the lines
+ that begin with "menuentry". It will not detect submenus. The
+ menu must be a non-nested menu. Add the quotes used in the menu
+ to guarantee your selection, as the first menuentry with the content
+ of \$GRUB_MENU that is found will be used.
+EOF
+ ;
+$config_help{"GRUB_FILE"} = << "EOF"
+ If grub2 is used, the full path for the grub.cfg file is placed
+ here. Use something like /boot/grub2/grub.cfg to search.
+EOF
+ ;
+$config_help{"SYSLINUX_LABEL"} = << "EOF"
+ If syslinux is used, the label that boots the target kernel must
+ be specified with SYSLINUX_LABEL.
+EOF
+ ;
+$config_help{"REBOOT_SCRIPT"} = << "EOF"
+ A script to reboot the target into the test kernel
+ (Only mandatory if REBOOT_TYPE = script)
+EOF
+ ;
+
+sub _logit {
+ if (defined($opt{"LOG_FILE"})) {
+ open(OUT, ">> $opt{LOG_FILE}") or die "Can't write to $opt{LOG_FILE}";
+ print OUT @_;
+ close(OUT);
+ }
+}
+
+sub logit {
+ if (defined($opt{"LOG_FILE"})) {
+ _logit @_;
+ } else {
+ print @_;
+ }
+}
+
+sub doprint {
+ print @_;
+ _logit @_;
+}
+
+sub read_prompt {
+ my ($cancel, $prompt) = @_;
+
+ my $ans;
+
+ for (;;) {
+ if ($cancel) {
+ print "$prompt [y/n/C] ";
+ } else {
+ print "$prompt [Y/n] ";
+ }
+ $ans = <STDIN>;
+ chomp $ans;
+ if ($ans =~ /^\s*$/) {
+ if ($cancel) {
+ $ans = "c";
+ } else {
+ $ans = "y";
+ }
+ }
+ last if ($ans =~ /^y$/i || $ans =~ /^n$/i);
+ if ($cancel) {
+ last if ($ans =~ /^c$/i);
+ print "Please answer either 'y', 'n' or 'c'.\n";
+ } else {
+ print "Please answer either 'y' or 'n'.\n";
+ }
+ }
+ if ($ans =~ /^c/i) {
+ exit;
+ }
+ if ($ans !~ /^y$/i) {
+ return 0;
+ }
+ return 1;
+}
+
+sub read_yn {
+ my ($prompt) = @_;
+
+ return read_prompt 0, $prompt;
+}
+
+sub read_ync {
+ my ($prompt) = @_;
+
+ return read_prompt 1, $prompt;
+}
+
+sub get_mandatory_config {
+ my ($config) = @_;
+ my $ans;
+
+ return if (defined($opt{$config}));
+
+ if (defined($config_help{$config})) {
+ print "\n";
+ print $config_help{$config};
+ }
+
+ for (;;) {
+ print "$config = ";
+ if (defined($default{$config}) && length($default{$config})) {
+ print "\[$default{$config}\] ";
+ }
+ $ans = <STDIN>;
+ $ans =~ s/^\s*(.*\S)\s*$/$1/;
+ if ($ans =~ /^\s*$/) {
+ if ($default{$config}) {
+ $ans = $default{$config};
+ } else {
+ print "Your answer can not be blank\n";
+ next;
+ }
+ }
+ $entered_configs{$config} = ${ans};
+ last;
+ }
+}
+
+sub show_time {
+ my ($time) = @_;
+
+ my $hours = 0;
+ my $minutes = 0;
+
+ if ($time > 3600) {
+ $hours = int($time / 3600);
+ $time -= $hours * 3600;
+ }
+ if ($time > 60) {
+ $minutes = int($time / 60);
+ $time -= $minutes * 60;
+ }
+
+ if ($hours > 0) {
+ doprint "$hours hour";
+ doprint "s" if ($hours > 1);
+ doprint " ";
+ }
+
+ if ($minutes > 0) {
+ doprint "$minutes minute";
+ doprint "s" if ($minutes > 1);
+ doprint " ";
+ }
+
+ doprint "$time second";
+ doprint "s" if ($time != 1);
+}
+
+sub print_times {
+ doprint "\n";
+ if ($build_time) {
+ doprint "Build time: ";
+ show_time($build_time);
+ doprint "\n";
+ }
+ if ($install_time) {
+ doprint "Install time: ";
+ show_time($install_time);
+ doprint "\n";
+ }
+ if ($reboot_time) {
+ doprint "Reboot time: ";
+ show_time($reboot_time);
+ doprint "\n";
+ }
+ if ($test_time) {
+ doprint "Test time: ";
+ show_time($test_time);
+ doprint "\n";
+ }
+ # reset for iterations like bisect
+ $build_time = 0;
+ $install_time = 0;
+ $reboot_time = 0;
+ $test_time = 0;
+}
+
+sub get_mandatory_configs {
+ get_mandatory_config("MACHINE");
+ get_mandatory_config("BUILD_DIR");
+ get_mandatory_config("OUTPUT_DIR");
+
+ if ($newconfig) {
+ get_mandatory_config("BUILD_OPTIONS");
+ }
+
+ # options required for other than just building a kernel
+ if (!$buildonly) {
+ get_mandatory_config("POWER_CYCLE");
+ get_mandatory_config("CONSOLE");
+ }
+
+ # options required for install and more
+ if ($buildonly != 1) {
+ get_mandatory_config("SSH_USER");
+ get_mandatory_config("BUILD_TARGET");
+ get_mandatory_config("TARGET_IMAGE");
+ }
+
+ get_mandatory_config("LOCALVERSION");
+
+ return if ($buildonly);
+
+ my $rtype = $opt{"REBOOT_TYPE"};
+
+ if (!defined($rtype)) {
+ if (!defined($opt{"GRUB_MENU"})) {
+ get_mandatory_config("REBOOT_TYPE");
+ $rtype = $entered_configs{"REBOOT_TYPE"};
+ } else {
+ $rtype = "grub";
+ }
+ }
+
+ if ($rtype eq "grub") {
+ get_mandatory_config("GRUB_MENU");
+ }
+
+ if ($rtype eq "grub2") {
+ get_mandatory_config("GRUB_MENU");
+ get_mandatory_config("GRUB_FILE");
+ }
+
+ if ($rtype eq "syslinux") {
+ get_mandatory_config("SYSLINUX_LABEL");
+ }
+}
+
+sub process_variables {
+ my ($value, $remove_undef) = @_;
+ my $retval = "";
+
+ # We want to check for '\', and it is just easier
+ # to check the previous characet of '$' and not need
+ # to worry if '$' is the first character. By adding
+ # a space to $value, we can just check [^\\]\$ and
+ # it will still work.
+ $value = " $value";
+
+ while ($value =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) {
+ my $begin = $1;
+ my $var = $2;
+ my $end = $3;
+ # append beginning of value to retval
+ $retval = "$retval$begin";
+ if (defined($variable{$var})) {
+ $retval = "$retval$variable{$var}";
+ } elsif (defined($remove_undef) && $remove_undef) {
+ # for if statements, any variable that is not defined,
+ # we simple convert to 0
+ $retval = "${retval}0";
+ } else {
+ # put back the origin piece.
+ $retval = "$retval\$\{$var\}";
+ # This could be an option that is used later, save
+ # it so we don't warn if this option is not one of
+ # ktests options.
+ $used_options{$var} = 1;
+ }
+ $value = $end;
+ }
+ $retval = "$retval$value";
+
+ # remove the space added in the beginning
+ $retval =~ s/ //;
+
+ return "$retval"
+}
+
+sub set_value {
+ my ($lvalue, $rvalue, $override, $overrides, $name) = @_;
+
+ my $prvalue = process_variables($rvalue);
+
+ if ($buildonly && $lvalue =~ /^TEST_TYPE(\[.*\])?$/ && $prvalue ne "build") {
+ # Note if a test is something other than build, then we
+ # will need other manditory options.
+ if ($prvalue ne "install") {
+ # for bisect, we need to check BISECT_TYPE
+ if ($prvalue ne "bisect") {
+ $buildonly = 0;
+ }
+ } else {
+ # install still limits some manditory options.
+ $buildonly = 2;
+ }
+ }
+
+ if ($buildonly && $lvalue =~ /^BISECT_TYPE(\[.*\])?$/ && $prvalue ne "build") {
+ if ($prvalue ne "install") {
+ $buildonly = 0;
+ } else {
+ # install still limits some manditory options.
+ $buildonly = 2;
+ }
+ }
+
+ if (defined($opt{$lvalue})) {
+ if (!$override || defined(${$overrides}{$lvalue})) {
+ my $extra = "";
+ if ($override) {
+ $extra = "In the same override section!\n";
+ }
+ die "$name: $.: Option $lvalue defined more than once!\n$extra";
+ }
+ ${$overrides}{$lvalue} = $prvalue;
+ }
+
+ $opt{$lvalue} = $prvalue;
+}
+
+sub set_eval {
+ my ($lvalue, $rvalue, $name) = @_;
+
+ my $prvalue = process_variables($rvalue);
+ my $arr;
+
+ if (defined($evals{$lvalue})) {
+ $arr = $evals{$lvalue};
+ } else {
+ $arr = [];
+ $evals{$lvalue} = $arr;
+ }
+
+ push @{$arr}, $rvalue;
+}
+
+sub set_variable {
+ my ($lvalue, $rvalue) = @_;
+
+ if ($rvalue =~ /^\s*$/) {
+ delete $variable{$lvalue};
+ } else {
+ $rvalue = process_variables($rvalue);
+ $variable{$lvalue} = $rvalue;
+ }
+}
+
+sub process_compare {
+ my ($lval, $cmp, $rval) = @_;
+
+ # remove whitespace
+
+ $lval =~ s/^\s*//;
+ $lval =~ s/\s*$//;
+
+ $rval =~ s/^\s*//;
+ $rval =~ s/\s*$//;
+
+ if ($cmp eq "==") {
+ return $lval eq $rval;
+ } elsif ($cmp eq "!=") {
+ return $lval ne $rval;
+ } elsif ($cmp eq "=~") {
+ return $lval =~ m/$rval/;
+ } elsif ($cmp eq "!~") {
+ return $lval !~ m/$rval/;
+ }
+
+ my $statement = "$lval $cmp $rval";
+ my $ret = eval $statement;
+
+ # $@ stores error of eval
+ if ($@) {
+ return -1;
+ }
+
+ return $ret;
+}
+
+sub value_defined {
+ my ($val) = @_;
+
+ return defined($variable{$2}) ||
+ defined($opt{$2});
+}
+
+my $d = 0;
+sub process_expression {
+ my ($name, $val) = @_;
+
+ my $c = $d++;
+
+ while ($val =~ s/\(([^\(]*?)\)/\&\&\&\&VAL\&\&\&\&/) {
+ my $express = $1;
+
+ if (process_expression($name, $express)) {
+ $val =~ s/\&\&\&\&VAL\&\&\&\&/ 1 /;
+ } else {
+ $val =~ s/\&\&\&\&VAL\&\&\&\&/ 0 /;
+ }
+ }
+
+ $d--;
+ my $OR = "\\|\\|";
+ my $AND = "\\&\\&";
+
+ while ($val =~ s/^(.*?)($OR|$AND)//) {
+ my $express = $1;
+ my $op = $2;
+
+ if (process_expression($name, $express)) {
+ if ($op eq "||") {
+ return 1;
+ }
+ } else {
+ if ($op eq "&&") {
+ return 0;
+ }
+ }
+ }
+
+ if ($val =~ /(.*)(==|\!=|>=|<=|>|<|=~|\!~)(.*)/) {
+ my $ret = process_compare($1, $2, $3);
+ if ($ret < 0) {
+ die "$name: $.: Unable to process comparison\n";
+ }
+ return $ret;
+ }
+
+ if ($val =~ /^\s*(NOT\s*)?DEFINED\s+(\S+)\s*$/) {
+ if (defined $1) {
+ return !value_defined($2);
+ } else {
+ return value_defined($2);
+ }
+ }
+
+ if ($val =~ /^\s*0\s*$/) {
+ return 0;
+ } elsif ($val =~ /^\s*\d+\s*$/) {
+ return 1;
+ }
+
+ die ("$name: $.: Undefined content $val in if statement\n");
+}
+
+sub process_if {
+ my ($name, $value) = @_;
+
+ # Convert variables and replace undefined ones with 0
+ my $val = process_variables($value, 1);
+ my $ret = process_expression $name, $val;
+
+ return $ret;
+}
+
+sub __read_config {
+ my ($config, $current_test_num) = @_;
+
+ my $in;
+ open($in, $config) || die "can't read file $config";
+
+ my $name = $config;
+ $name =~ s,.*/(.*),$1,;
+
+ my $test_num = $$current_test_num;
+ my $default = 1;
+ my $repeat = 1;
+ my $num_tests_set = 0;
+ my $skip = 0;
+ my $rest;
+ my $line;
+ my $test_case = 0;
+ my $if = 0;
+ my $if_set = 0;
+ my $override = 0;
+
+ my %overrides;
+
+ while (<$in>) {
+
+ # ignore blank lines and comments
+ next if (/^\s*$/ || /\s*\#/);
+
+ if (/^\s*(TEST_START|DEFAULTS)\b(.*)/) {
+
+ my $type = $1;
+ $rest = $2;
+ $line = $2;
+
+ my $old_test_num;
+ my $old_repeat;
+ $override = 0;
+
+ if ($type eq "TEST_START") {
+
+ if ($num_tests_set) {
+ die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
+ }
+
+ $old_test_num = $test_num;
+ $old_repeat = $repeat;
+
+ $test_num += $repeat;
+ $default = 0;
+ $repeat = 1;
+ } else {
+ $default = 1;
+ }
+
+ # If SKIP is anywhere in the line, the command will be skipped
+ if ($rest =~ s/\s+SKIP\b//) {
+ $skip = 1;
+ } else {
+ $test_case = 1;
+ $skip = 0;
+ }
+
+ if ($rest =~ s/\sELSE\b//) {
+ if (!$if) {
+ die "$name: $.: ELSE found with out matching IF section\n$_";
+ }
+ $if = 0;
+
+ if ($if_set) {
+ $skip = 1;
+ } else {
+ $skip = 0;
+ }
+ }
+
+ if ($rest =~ s/\sIF\s+(.*)//) {
+ if (process_if($name, $1)) {
+ $if_set = 1;
+ } else {
+ $skip = 1;
+ }
+ $if = 1;
+ } else {
+ $if = 0;
+ $if_set = 0;
+ }
+
+ if (!$skip) {
+ if ($type eq "TEST_START") {
+ if ($rest =~ s/\s+ITERATE\s+(\d+)//) {
+ $repeat = $1;
+ $repeat_tests{"$test_num"} = $repeat;
+ }
+ } elsif ($rest =~ s/\sOVERRIDE\b//) {
+ # DEFAULT only
+ $override = 1;
+ # Clear previous overrides
+ %overrides = ();
+ }
+ }
+
+ if (!$skip && $rest !~ /^\s*$/) {
+ die "$name: $.: Gargbage found after $type\n$_";
+ }
+
+ if ($skip && $type eq "TEST_START") {
+ $test_num = $old_test_num;
+ $repeat = $old_repeat;
+ }
+
+ } elsif (/^\s*ELSE\b(.*)$/) {
+ if (!$if) {
+ die "$name: $.: ELSE found with out matching IF section\n$_";
+ }
+ $rest = $1;
+ if ($if_set) {
+ $skip = 1;
+ $rest = "";
+ } else {
+ $skip = 0;
+
+ if ($rest =~ /\sIF\s+(.*)/) {
+ # May be a ELSE IF section.
+ if (process_if($name, $1)) {
+ $if_set = 1;
+ } else {
+ $skip = 1;
+ }
+ $rest = "";
+ } else {
+ $if = 0;
+ }
+ }
+
+ if ($rest !~ /^\s*$/) {
+ die "$name: $.: Gargbage found after DEFAULTS\n$_";
+ }
+
+ } elsif (/^\s*INCLUDE\s+(\S+)/) {
+
+ next if ($skip);
+
+ if (!$default) {
+ die "$name: $.: INCLUDE can only be done in default sections\n$_";
+ }
+
+ my $file = process_variables($1);
+
+ if ($file !~ m,^/,) {
+ # check the path of the config file first
+ if ($config =~ m,(.*)/,) {
+ if (-f "$1/$file") {
+ $file = "$1/$file";
+ }
+ }
+ }
+
+ if ( ! -r $file ) {
+ die "$name: $.: Can't read file $file\n$_";
+ }
+
+ if (__read_config($file, \$test_num)) {
+ $test_case = 1;
+ }
+
+ } elsif (/^\s*([A-Z_\[\]\d]+)\s*=~\s*(.*?)\s*$/) {
+
+ next if ($skip);
+
+ my $lvalue = $1;
+ my $rvalue = $2;
+
+ if ($default || $lvalue =~ /\[\d+\]$/) {
+ set_eval($lvalue, $rvalue, $name);
+ } else {
+ my $val = "$lvalue\[$test_num\]";
+ set_eval($val, $rvalue, $name);
+ }
+
+ } elsif (/^\s*([A-Z_\[\]\d]+)\s*=\s*(.*?)\s*$/) {
+
+ next if ($skip);
+
+ my $lvalue = $1;
+ my $rvalue = $2;
+
+ if (!$default &&
+ ($lvalue eq "NUM_TESTS" ||
+ $lvalue eq "LOG_FILE" ||
+ $lvalue eq "CLEAR_LOG")) {
+ die "$name: $.: $lvalue must be set in DEFAULTS section\n";
+ }
+
+ if ($lvalue eq "NUM_TESTS") {
+ if ($test_num) {
+ die "$name: $.: Can not specify both NUM_TESTS and TEST_START\n";
+ }
+ if (!$default) {
+ die "$name: $.: NUM_TESTS must be set in default section\n";
+ }
+ $num_tests_set = 1;
+ }
+
+ if ($default || $lvalue =~ /\[\d+\]$/) {
+ set_value($lvalue, $rvalue, $override, \%overrides, $name);
+ } else {
+ my $val = "$lvalue\[$test_num\]";
+ set_value($val, $rvalue, $override, \%overrides, $name);
+
+ if ($repeat > 1) {
+ $repeats{$val} = $repeat;
+ }
+ }
+ } elsif (/^\s*([A-Z_\[\]\d]+)\s*:=\s*(.*?)\s*$/) {
+ next if ($skip);
+
+ my $lvalue = $1;
+ my $rvalue = $2;
+
+ # process config variables.
+ # Config variables are only active while reading the
+ # config and can be defined anywhere. They also ignore
+ # TEST_START and DEFAULTS, but are skipped if they are in
+ # on of these sections that have SKIP defined.
+ # The save variable can be
+ # defined multiple times and the new one simply overrides
+ # the prevous one.
+ set_variable($lvalue, $rvalue);
+
+ } else {
+ die "$name: $.: Garbage found in config\n$_";
+ }
+ }
+
+ if ($test_num) {
+ $test_num += $repeat - 1;
+ $opt{"NUM_TESTS"} = $test_num;
+ }
+
+ close($in);
+
+ $$current_test_num = $test_num;
+
+ return $test_case;
+}
+
+sub get_test_case {
+ print "What test case would you like to run?\n";
+ print " (build, install or boot)\n";
+ print " Other tests are available but require editing the config file\n";
+ my $ans = <STDIN>;
+ chomp $ans;
+ $default{"TEST_TYPE"} = $ans;
+}
+
+sub read_config {
+ my ($config) = @_;
+
+ my $test_case;
+ my $test_num = 0;
+
+ $test_case = __read_config $config, \$test_num;
+
+ # make sure we have all mandatory configs
+ get_mandatory_configs;
+
+ # was a test specified?
+ if (!$test_case) {
+ print "No test case specified.\n";
+ get_test_case;
+ }
+
+ # set any defaults
+
+ foreach my $default (keys %default) {
+ if (!defined($opt{$default})) {
+ $opt{$default} = $default{$default};
+ }
+ }
+
+ if ($opt{"IGNORE_UNUSED"} == 1) {
+ return;
+ }
+
+ my %not_used;
+
+ # check if there are any stragglers (typos?)
+ foreach my $option (keys %opt) {
+ my $op = $option;
+ # remove per test labels.
+ $op =~ s/\[.*\]//;
+ if (!exists($option_map{$op}) &&
+ !exists($default{$op}) &&
+ !exists($used_options{$op})) {
+ $not_used{$op} = 1;
+ }
+ }
+
+ if (%not_used) {
+ my $s = "s are";
+ $s = " is" if (keys %not_used == 1);
+ print "The following option$s not used; could be a typo:\n";
+ foreach my $option (keys %not_used) {
+ print "$option\n";
+ }
+ print "Set IGRNORE_UNUSED = 1 to have ktest ignore unused variables\n";
+ if (!read_yn "Do you want to continue?") {
+ exit -1;
+ }
+ }
+}
+
+sub __eval_option {
+ my ($name, $option, $i) = @_;
+
+ # Add space to evaluate the character before $
+ $option = " $option";
+ my $retval = "";
+ my $repeated = 0;
+ my $parent = 0;
+
+ foreach my $test (keys %repeat_tests) {
+ if ($i >= $test &&
+ $i < $test + $repeat_tests{$test}) {
+
+ $repeated = 1;
+ $parent = $test;
+ last;
+ }
+ }
+
+ while ($option =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) {
+ my $start = $1;
+ my $var = $2;
+ my $end = $3;
+
+ # Append beginning of line
+ $retval = "$retval$start";
+
+ # If the iteration option OPT[$i] exists, then use that.
+ # otherwise see if the default OPT (without [$i]) exists.
+
+ my $o = "$var\[$i\]";
+ my $parento = "$var\[$parent\]";
+
+ # If a variable contains itself, use the default var
+ if (($var eq $name) && defined($opt{$var})) {
+ $o = $opt{$var};
+ $retval = "$retval$o";
+ } elsif (defined($opt{$o})) {
+ $o = $opt{$o};
+ $retval = "$retval$o";
+ } elsif ($repeated && defined($opt{$parento})) {
+ $o = $opt{$parento};
+ $retval = "$retval$o";
+ } elsif (defined($opt{$var})) {
+ $o = $opt{$var};
+ $retval = "$retval$o";
+ } elsif ($var eq "KERNEL_VERSION" && defined($make)) {
+ # special option KERNEL_VERSION uses kernel version
+ get_version();
+ $retval = "$retval$version";
+ } else {
+ $retval = "$retval\$\{$var\}";
+ }
+
+ $option = $end;
+ }
+
+ $retval = "$retval$option";
+
+ $retval =~ s/^ //;
+
+ return $retval;
+}
+
+sub process_evals {
+ my ($name, $option, $i) = @_;
+
+ my $option_name = "$name\[$i\]";
+ my $ev;
+
+ my $old_option = $option;
+
+ if (defined($evals{$option_name})) {
+ $ev = $evals{$option_name};
+ } elsif (defined($evals{$name})) {
+ $ev = $evals{$name};
+ } else {
+ return $option;
+ }
+
+ for my $e (@{$ev}) {
+ eval "\$option =~ $e";
+ }
+
+ if ($option ne $old_option) {
+ doprint("$name changed from '$old_option' to '$option'\n");
+ }
+
+ return $option;
+}
+
+sub eval_option {
+ my ($name, $option, $i) = @_;
+
+ my $prev = "";
+
+ # Since an option can evaluate to another option,
+ # keep iterating until we do not evaluate any more
+ # options.
+ my $r = 0;
+ while ($prev ne $option) {
+ # Check for recursive evaluations.
+ # 100 deep should be more than enough.
+ if ($r++ > 100) {
+ die "Over 100 evaluations accurred with $option\n" .
+ "Check for recursive variables\n";
+ }
+ $prev = $option;
+ $option = __eval_option($name, $option, $i);
+ }
+
+ $option = process_evals($name, $option, $i);
+
+ return $option;
+}
+
+sub run_command;
+sub start_monitor;
+sub end_monitor;
+sub wait_for_monitor;
+
+sub reboot {
+ my ($time) = @_;
+
+ # Make sure everything has been written to disk
+ run_ssh("sync");
+
+ if (defined($time)) {
+ start_monitor;
+ # flush out current monitor
+ # May contain the reboot success line
+ wait_for_monitor 1;
+ }
+
+ # try to reboot normally
+ if (run_command $reboot) {
+ if (defined($powercycle_after_reboot)) {
+ sleep $powercycle_after_reboot;
+ run_command "$power_cycle";
+ }
+ } else {
+ # nope? power cycle it.
+ run_command "$power_cycle";
+ }
+
+ if (defined($time)) {
+
+ # We only want to get to the new kernel, don't fail
+ # if we stumble over a call trace.
+ my $save_ignore_errors = $ignore_errors;
+ $ignore_errors = 1;
+
+ # Look for the good kernel to boot
+ if (wait_for_monitor($time, "Linux version")) {
+ # reboot got stuck?
+ doprint "Reboot did not finish. Forcing power cycle\n";
+ run_command "$power_cycle";
+ }
+
+ $ignore_errors = $save_ignore_errors;
+
+ # Still need to wait for the reboot to finish
+ wait_for_monitor($time, $reboot_success_line);
+
+ end_monitor;
+ }
+}
+
+sub reboot_to_good {
+ my ($time) = @_;
+
+ if (defined($switch_to_good)) {
+ run_command $switch_to_good;
+ }
+
+ reboot $time;
+}
+
+sub do_not_reboot {
+ my $i = $iteration;
+
+ return $test_type eq "build" || $no_reboot ||
+ ($test_type eq "patchcheck" && $opt{"PATCHCHECK_TYPE[$i]"} eq "build") ||
+ ($test_type eq "bisect" && $opt{"BISECT_TYPE[$i]"} eq "build");
+}
+
+sub dodie {
+ doprint "CRITICAL FAILURE... ", @_, "\n";
+
+ my $i = $iteration;
+
+ if ($reboot_on_error && !do_not_reboot) {
+
+ doprint "REBOOTING\n";
+ reboot_to_good;
+
+ } elsif ($poweroff_on_error && defined($power_off)) {
+ doprint "POWERING OFF\n";
+ `$power_off`;
+ }
+
+ if (defined($opt{"LOG_FILE"})) {
+ print " See $opt{LOG_FILE} for more info.\n";
+ }
+
+ if ($monitor_cnt) {
+ # restore terminal settings
+ system("stty $stty_orig");
+ }
+
+ die @_, "\n";
+}
+
+sub create_pty {
+ my ($ptm, $pts) = @_;
+ my $tmp;
+ my $TIOCSPTLCK = 0x40045431;
+ my $TIOCGPTN = 0x80045430;
+
+ sysopen($ptm, "/dev/ptmx", O_RDWR | O_NONBLOCK) or
+ dodie "Cant open /dev/ptmx";
+
+ # unlockpt()
+ $tmp = pack("i", 0);
+ ioctl($ptm, $TIOCSPTLCK, $tmp) or
+ dodie "ioctl TIOCSPTLCK for /dev/ptmx failed";
+
+ # ptsname()
+ ioctl($ptm, $TIOCGPTN, $tmp) or
+ dodie "ioctl TIOCGPTN for /dev/ptmx failed";
+ $tmp = unpack("i", $tmp);
+
+ sysopen($pts, "/dev/pts/$tmp", O_RDWR | O_NONBLOCK) or
+ dodie "Can't open /dev/pts/$tmp";
+}
+
+sub exec_console {
+ my ($ptm, $pts) = @_;
+
+ close($ptm);
+
+ close(\*STDIN);
+ close(\*STDOUT);
+ close(\*STDERR);
+
+ open(\*STDIN, '<&', $pts);
+ open(\*STDOUT, '>&', $pts);
+ open(\*STDERR, '>&', $pts);
+
+ close($pts);
+
+ exec $console or
+ die "Can't open console $console";
+}
+
+sub open_console {
+ my ($ptm) = @_;
+ my $pts = \*PTSFD;
+ my $pid;
+
+ # save terminal settings
+ $stty_orig = `stty -g`;
+
+ # place terminal in cbreak mode so that stdin can be read one character at
+ # a time without having to wait for a newline
+ system("stty -icanon -echo -icrnl");
+
+ create_pty($ptm, $pts);
+
+ $pid = fork;
+
+ if (!$pid) {
+ # child
+ exec_console($ptm, $pts)
+ }
+
+ # parent
+ close($pts);
+
+ return $pid;
+
+ open(PTSFD, "Stop perl from warning about single use of PTSFD");
+}
+
+sub close_console {
+ my ($fp, $pid) = @_;
+
+ doprint "kill child process $pid\n";
+ kill $close_console_signal, $pid;
+
+ print "closing!\n";
+ close($fp);
+
+ # restore terminal settings
+ system("stty $stty_orig");
+}
+
+sub start_monitor {
+ if ($monitor_cnt++) {
+ return;
+ }
+ $monitor_fp = \*MONFD;
+ $monitor_pid = open_console $monitor_fp;
+
+ return;
+
+ open(MONFD, "Stop perl from warning about single use of MONFD");
+}
+
+sub end_monitor {
+ return if (!defined $console);
+ if (--$monitor_cnt) {
+ return;
+ }
+ close_console($monitor_fp, $monitor_pid);
+}
+
+sub wait_for_monitor {
+ my ($time, $stop) = @_;
+ my $full_line = "";
+ my $line;
+ my $booted = 0;
+ my $start_time = time;
+ my $skip_call_trace = 0;
+ my $bug = 0;
+ my $bug_ignored = 0;
+ my $now;
+
+ doprint "** Wait for monitor to settle down **\n";
+
+ # read the monitor and wait for the system to calm down
+ while (!$booted) {
+ $line = wait_for_input($monitor_fp, $time);
+ last if (!defined($line));
+ print "$line";
+ $full_line .= $line;
+
+ if (defined($stop) && $full_line =~ /$stop/) {
+ doprint "wait for monitor detected $stop\n";
+ $booted = 1;
+ }
+
+ if ($full_line =~ /\[ backtrace testing \]/) {
+ $skip_call_trace = 1;
+ }
+
+ if ($full_line =~ /call trace:/i) {
+ if (!$bug && !$skip_call_trace) {
+ if ($ignore_errors) {
+ $bug_ignored = 1;
+ } else {
+ $bug = 1;
+ }
+ }
+ }
+
+ if ($full_line =~ /\[ end of backtrace testing \]/) {
+ $skip_call_trace = 0;
+ }
+
+ if ($full_line =~ /Kernel panic -/) {
+ $bug = 1;
+ }
+
+ if ($line =~ /\n/) {
+ $full_line = "";
+ }
+ $now = time;
+ if ($now - $start_time >= $max_monitor_wait) {
+ doprint "Exiting monitor flush due to hitting MAX_MONITOR_WAIT\n";
+ return 1;
+ }
+ }
+ print "** Monitor flushed **\n";
+
+ # if stop is defined but wasn't hit, return error
+ # used by reboot (which wants to see a reboot)
+ if (defined($stop) && !$booted) {
+ $bug = 1;
+ }
+ return $bug;
+}
+
+sub save_logs {
+ my ($result, $basedir) = @_;
+ my @t = localtime;
+ my $date = sprintf "%04d%02d%02d%02d%02d%02d",
+ 1900+$t[5],$t[4],$t[3],$t[2],$t[1],$t[0];
+
+ my $type = $build_type;
+ if ($type =~ /useconfig/) {
+ $type = "useconfig";
+ }
+
+ my $dir = "$machine-$test_type-$type-$result-$date";
+
+ $dir = "$basedir/$dir";
+
+ if (!-d $dir) {
+ mkpath($dir) or
+ die "can't create $dir";
+ }
+
+ my %files = (
+ "config" => $output_config,
+ "buildlog" => $buildlog,
+ "dmesg" => $dmesg,
+ "testlog" => $testlog,
+ );
+
+ while (my ($name, $source) = each(%files)) {
+ if (-f "$source") {
+ cp "$source", "$dir/$name" or
+ die "failed to copy $source";
+ }
+ }
+
+ doprint "*** Saved info to $dir ***\n";
+}
+
+sub fail {
+
+ if (defined($post_test)) {
+ run_command $post_test;
+ }
+
+ if ($die_on_failure) {
+ dodie @_;
+ }
+
+ doprint "FAILED\n";
+
+ my $i = $iteration;
+
+ # no need to reboot for just building.
+ if (!do_not_reboot) {
+ doprint "REBOOTING\n";
+ reboot_to_good $sleep_time;
+ }
+
+ my $name = "";
+
+ if (defined($test_name)) {
+ $name = " ($test_name)";
+ }
+
+ print_times;
+
+ doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+ doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+ doprint "KTEST RESULT: TEST $i$name Failed: ", @_, "\n";
+ doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+ doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
+
+ if (defined($store_failures)) {
+ save_logs "fail", $store_failures;
+ }
+
+ return 1;
+}
+
+sub run_command {
+ my ($command, $redirect) = @_;
+ my $start_time;
+ my $end_time;
+ my $dolog = 0;
+ my $dord = 0;
+ my $pid;
+
+ $start_time = time;
+
+ $command =~ s/\$SSH_USER/$ssh_user/g;
+ $command =~ s/\$MACHINE/$machine/g;
+
+ doprint("$command ... ");
+
+ $pid = open(CMD, "$command 2>&1 |") or
+ (fail "unable to exec $command" and return 0);
+
+ if (defined($opt{"LOG_FILE"})) {
+ open(LOG, ">>$opt{LOG_FILE}") or
+ dodie "failed to write to log";
+ $dolog = 1;
+ }
+
+ if (defined($redirect)) {
+ open (RD, ">$redirect") or
+ dodie "failed to write to redirect $redirect";
+ $dord = 1;
+ }
+
+ while (<CMD>) {
+ print LOG if ($dolog);
+ print RD if ($dord);
+ }
+
+ waitpid($pid, 0);
+ my $failed = $?;
+
+ close(CMD);
+ close(LOG) if ($dolog);
+ close(RD) if ($dord);
+
+ $end_time = time;
+ my $delta = $end_time - $start_time;
+
+ if ($delta == 1) {
+ doprint "[1 second] ";
+ } else {
+ doprint "[$delta seconds] ";
+ }
+
+ if ($failed) {
+ doprint "FAILED!\n";
+ } else {
+ doprint "SUCCESS\n";
+ }
+
+ return !$failed;
+}
+
+sub run_ssh {
+ my ($cmd) = @_;
+ my $cp_exec = $ssh_exec;
+
+ $cp_exec =~ s/\$SSH_COMMAND/$cmd/g;
+ return run_command "$cp_exec";
+}
+
+sub run_scp {
+ my ($src, $dst, $cp_scp) = @_;
+
+ $cp_scp =~ s/\$SRC_FILE/$src/g;
+ $cp_scp =~ s/\$DST_FILE/$dst/g;
+
+ return run_command "$cp_scp";
+}
+
+sub run_scp_install {
+ my ($src, $dst) = @_;
+
+ my $cp_scp = $scp_to_target_install;
+
+ return run_scp($src, $dst, $cp_scp);
+}
+
+sub run_scp_mod {
+ my ($src, $dst) = @_;
+
+ my $cp_scp = $scp_to_target;
+
+ return run_scp($src, $dst, $cp_scp);
+}
+
+sub get_grub2_index {
+
+ return if (defined($grub_number) && defined($last_grub_menu) &&
+ $last_grub_menu eq $grub_menu && defined($last_machine) &&
+ $last_machine eq $machine);
+
+ doprint "Find grub2 menu ... ";
+ $grub_number = -1;
+
+ my $ssh_grub = $ssh_exec;
+ $ssh_grub =~ s,\$SSH_COMMAND,cat $grub_file,g;
+
+ open(IN, "$ssh_grub |")
+ or die "unable to get $grub_file";
+
+ my $found = 0;
+
+ while (<IN>) {
+ if (/^menuentry.*$grub_menu/) {
+ $grub_number++;
+ $found = 1;
+ last;
+ } elsif (/^menuentry\s/) {
+ $grub_number++;
+ }
+ }
+ close(IN);
+
+ die "Could not find '$grub_menu' in $grub_file on $machine"
+ if (!$found);
+ doprint "$grub_number\n";
+ $last_grub_menu = $grub_menu;
+ $last_machine = $machine;
+}
+
+sub get_grub_index {
+
+ if ($reboot_type eq "grub2") {
+ get_grub2_index;
+ return;
+ }
+
+ if ($reboot_type ne "grub") {
+ return;
+ }
+ return if (defined($grub_number) && defined($last_grub_menu) &&
+ $last_grub_menu eq $grub_menu && defined($last_machine) &&
+ $last_machine eq $machine);
+
+ doprint "Find grub menu ... ";
+ $grub_number = -1;
+
+ my $ssh_grub = $ssh_exec;
+ $ssh_grub =~ s,\$SSH_COMMAND,cat /boot/grub/menu.lst,g;
+
+ open(IN, "$ssh_grub |")
+ or die "unable to get menu.lst";
+
+ my $found = 0;
+
+ while (<IN>) {
+ if (/^\s*title\s+$grub_menu\s*$/) {
+ $grub_number++;
+ $found = 1;
+ last;
+ } elsif (/^\s*title\s/) {
+ $grub_number++;
+ }
+ }
+ close(IN);
+
+ die "Could not find '$grub_menu' in /boot/grub/menu on $machine"
+ if (!$found);
+ doprint "$grub_number\n";
+ $last_grub_menu = $grub_menu;
+ $last_machine = $machine;
+}
+
+sub wait_for_input
+{
+ my ($fp, $time) = @_;
+ my $rin;
+ my $rout;
+ my $nr;
+ my $buf;
+ my $line;
+ my $ch;
+
+ if (!defined($time)) {
+ $time = $timeout;
+ }
+
+ $rin = '';
+ vec($rin, fileno($fp), 1) = 1;
+ vec($rin, fileno(\*STDIN), 1) = 1;
+
+ while (1) {
+ $nr = select($rout=$rin, undef, undef, $time);
+
+ if ($nr <= 0) {
+ return undef;
+ }
+
+ # copy data from stdin to the console
+ if (vec($rout, fileno(\*STDIN), 1) == 1) {
+ sysread(\*STDIN, $buf, 1000);
+ syswrite($fp, $buf, 1000);
+ next;
+ }
+
+ $line = "";
+
+ # try to read one char at a time
+ while (sysread $fp, $ch, 1) {
+ $line .= $ch;
+ last if ($ch eq "\n");
+ }
+
+ if (!length($line)) {
+ return undef;
+ }
+
+ return $line;
+ }
+}
+
+sub reboot_to {
+ if (defined($switch_to_test)) {
+ run_command $switch_to_test;
+ }
+
+ if ($reboot_type eq "grub") {
+ run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'";
+ } elsif ($reboot_type eq "grub2") {
+ run_ssh "$grub_reboot $grub_number";
+ } elsif ($reboot_type eq "syslinux") {
+ run_ssh "$syslinux --once \\\"$syslinux_label\\\" $syslinux_path";
+ } elsif (defined $reboot_script) {
+ run_command "$reboot_script";
+ }
+ reboot;
+}
+
+sub get_sha1 {
+ my ($commit) = @_;
+
+ doprint "git rev-list --max-count=1 $commit ... ";
+ my $sha1 = `git rev-list --max-count=1 $commit`;
+ my $ret = $?;
+
+ logit $sha1;
+
+ if ($ret) {
+ doprint "FAILED\n";
+ dodie "Failed to get git $commit";
+ }
+
+ print "SUCCESS\n";
+
+ chomp $sha1;
+
+ return $sha1;
+}
+
+sub monitor {
+ my $booted = 0;
+ my $bug = 0;
+ my $bug_ignored = 0;
+ my $skip_call_trace = 0;
+ my $loops;
+
+ my $start_time = time;
+
+ wait_for_monitor 5;
+
+ my $line;
+ my $full_line = "";
+
+ open(DMESG, "> $dmesg") or
+ die "unable to write to $dmesg";
+
+ reboot_to;
+
+ my $success_start;
+ my $failure_start;
+ my $monitor_start = time;
+ my $done = 0;
+ my $version_found = 0;
+
+ while (!$done) {
+
+ if ($bug && defined($stop_after_failure) &&
+ $stop_after_failure >= 0) {
+ my $time = $stop_after_failure - (time - $failure_start);
+ $line = wait_for_input($monitor_fp, $time);
+ if (!defined($line)) {
+ doprint "bug timed out after $booted_timeout seconds\n";
+ doprint "Test forced to stop after $stop_after_failure seconds after failure\n";
+ last;
+ }
+ } elsif ($booted) {
+ $line = wait_for_input($monitor_fp, $booted_timeout);
+ if (!defined($line)) {
+ my $s = $booted_timeout == 1 ? "" : "s";
+ doprint "Successful boot found: break after $booted_timeout second$s\n";
+ last;
+ }
+ } else {
+ $line = wait_for_input($monitor_fp);
+ if (!defined($line)) {
+ my $s = $timeout == 1 ? "" : "s";
+ doprint "Timed out after $timeout second$s\n";
+ last;
+ }
+ }
+
+ doprint $line;
+ print DMESG $line;
+
+ # we are not guaranteed to get a full line
+ $full_line .= $line;
+
+ if ($full_line =~ /$success_line/) {
+ $booted = 1;
+ $success_start = time;
+ }
+
+ if ($booted && defined($stop_after_success) &&
+ $stop_after_success >= 0) {
+ my $now = time;
+ if ($now - $success_start >= $stop_after_success) {
+ doprint "Test forced to stop after $stop_after_success seconds after success\n";
+ last;
+ }
+ }
+
+ if ($full_line =~ /\[ backtrace testing \]/) {
+ $skip_call_trace = 1;
+ }
+
+ if ($full_line =~ /call trace:/i) {
+ if (!$bug && !$skip_call_trace) {
+ if ($ignore_errors) {
+ $bug_ignored = 1;
+ } else {
+ $bug = 1;
+ $failure_start = time;
+ }
+ }
+ }
+
+ if ($bug && defined($stop_after_failure) &&
+ $stop_after_failure >= 0) {
+ my $now = time;
+ if ($now - $failure_start >= $stop_after_failure) {
+ doprint "Test forced to stop after $stop_after_failure seconds after failure\n";
+ last;
+ }
+ }
+
+ if ($full_line =~ /\[ end of backtrace testing \]/) {
+ $skip_call_trace = 0;
+ }
+
+ if ($full_line =~ /Kernel panic -/) {
+ $failure_start = time;
+ $bug = 1;
+ }
+
+ # Detect triple faults by testing the banner
+ if ($full_line =~ /\bLinux version (\S+).*\n/) {
+ if ($1 eq $version) {
+ $version_found = 1;
+ } elsif ($version_found && $detect_triplefault) {
+ # We already booted into the kernel we are testing,
+ # but now we booted into another kernel?
+ # Consider this a triple fault.
+ doprint "Already booted in Linux kernel $version, but now\n";
+ doprint "we booted into Linux kernel $1.\n";
+ doprint "Assuming that this is a triple fault.\n";
+ doprint "To disable this: set DETECT_TRIPLE_FAULT to 0\n";
+ last;
+ }
+ }
+
+ if ($line =~ /\n/) {
+ $full_line = "";
+ }
+
+ if ($stop_test_after > 0 && !$booted && !$bug) {
+ if (time - $monitor_start > $stop_test_after) {
+ doprint "STOP_TEST_AFTER ($stop_test_after seconds) timed out\n";
+ $done = 1;
+ }
+ }
+ }
+
+ my $end_time = time;
+ $reboot_time = $end_time - $start_time;
+
+ close(DMESG);
+
+ if ($bug) {
+ return 0 if ($in_bisect);
+ fail "failed - got a bug report" and return 0;
+ }
+
+ if (!$booted) {
+ return 0 if ($in_bisect);
+ fail "failed - never got a boot prompt." and return 0;
+ }
+
+ if ($bug_ignored) {
+ doprint "WARNING: Call Trace detected but ignored due to IGNORE_ERRORS=1\n";
+ }
+
+ return 1;
+}
+
+sub eval_kernel_version {
+ my ($option) = @_;
+
+ $option =~ s/\$KERNEL_VERSION/$version/g;
+
+ return $option;
+}
+
+sub do_post_install {
+
+ return if (!defined($post_install));
+
+ my $cp_post_install = eval_kernel_version $post_install;
+ run_command "$cp_post_install" or
+ dodie "Failed to run post install";
+}
+
+# Sometimes the reboot fails, and will hang. We try to ssh to the box
+# and if we fail, we force another reboot, that should powercycle it.
+sub test_booted {
+ if (!run_ssh "echo testing connection") {
+ reboot $sleep_time;
+ }
+}
+
+sub install {
+
+ return if ($no_install);
+
+ my $start_time = time;
+
+ if (defined($pre_install)) {
+ my $cp_pre_install = eval_kernel_version $pre_install;
+ run_command "$cp_pre_install" or
+ dodie "Failed to run pre install";
+ }
+
+ my $cp_target = eval_kernel_version $target_image;
+
+ test_booted;
+
+ run_scp_install "$outputdir/$build_target", "$cp_target" or
+ dodie "failed to copy image";
+
+ my $install_mods = 0;
+
+ # should we process modules?
+ $install_mods = 0;
+ open(IN, "$output_config") or dodie("Can't read config file");
+ while (<IN>) {
+ if (/CONFIG_MODULES(=y)?/) {
+ if (defined($1)) {
+ $install_mods = 1;
+ last;
+ }
+ }
+ }
+ close(IN);
+
+ if (!$install_mods) {
+ do_post_install;
+ doprint "No modules needed\n";
+ my $end_time = time;
+ $install_time = $end_time - $start_time;
+ return;
+ }
+
+ run_command "$make INSTALL_MOD_STRIP=1 INSTALL_MOD_PATH=$tmpdir modules_install" or
+ dodie "Failed to install modules";
+
+ my $modlib = "/lib/modules/$version";
+ my $modtar = "ktest-mods.tar.bz2";
+
+ run_ssh "rm -rf $modlib" or
+ dodie "failed to remove old mods: $modlib";
+
+ # would be nice if scp -r did not follow symbolic links
+ run_command "cd $tmpdir && tar -cjf $modtar lib/modules/$version" or
+ dodie "making tarball";
+
+ run_scp_mod "$tmpdir/$modtar", "/tmp" or
+ dodie "failed to copy modules";
+
+ unlink "$tmpdir/$modtar";
+
+ run_ssh "'(cd / && tar xjf /tmp/$modtar)'" or
+ dodie "failed to tar modules";
+
+ run_ssh "rm -f /tmp/$modtar";
+
+ do_post_install;
+
+ my $end_time = time;
+ $install_time = $end_time - $start_time;
+}
+
+sub get_version {
+ # get the release name
+ return if ($have_version);
+ doprint "$make kernelrelease ... ";
+ $version = `$make -s kernelrelease | tail -1`;
+ chomp($version);
+ doprint "$version\n";
+ $have_version = 1;
+}
+
+sub start_monitor_and_install {
+ # Make sure the stable kernel has finished booting
+
+ # Install bisects, don't need console
+ if (defined $console) {
+ start_monitor;
+ wait_for_monitor 5;
+ end_monitor;
+ }
+
+ get_grub_index;
+ get_version;
+ install;
+
+ start_monitor if (defined $console);
+ return monitor;
+}
+
+my $check_build_re = ".*:.*(warning|error|Error):.*";
+my $utf8_quote = "\\x{e2}\\x{80}(\\x{98}|\\x{99})";
+
+sub process_warning_line {
+ my ($line) = @_;
+
+ chomp $line;
+
+ # for distcc heterogeneous systems, some compilers
+ # do things differently causing warning lines
+ # to be slightly different. This makes an attempt
+ # to fixe those issues.
+
+ # chop off the index into the line
+ # using distcc, some compilers give different indexes
+ # depending on white space
+ $line =~ s/^(\s*\S+:\d+:)\d+/$1/;
+
+ # Some compilers use UTF-8 extended for quotes and some don't.
+ $line =~ s/$utf8_quote/'/g;
+
+ return $line;
+}
+
+# Read buildlog and check against warnings file for any
+# new warnings.
+#
+# Returns 1 if OK
+# 0 otherwise
+sub check_buildlog {
+ return 1 if (!defined $warnings_file);
+
+ my %warnings_list;
+
+ # Failed builds should not reboot the target
+ my $save_no_reboot = $no_reboot;
+ $no_reboot = 1;
+
+ if (-f $warnings_file) {
+ open(IN, $warnings_file) or
+ dodie "Error opening $warnings_file";
+
+ while (<IN>) {
+ if (/$check_build_re/) {
+ my $warning = process_warning_line $_;
+
+ $warnings_list{$warning} = 1;
+ }
+ }
+ close(IN);
+ }
+
+ # If warnings file didn't exist, and WARNINGS_FILE exist,
+ # then we fail on any warning!
+
+ open(IN, $buildlog) or dodie "Can't open $buildlog";
+ while (<IN>) {
+ if (/$check_build_re/) {
+ my $warning = process_warning_line $_;
+
+ if (!defined $warnings_list{$warning}) {
+ fail "New warning found (not in $warnings_file)\n$_\n";
+ $no_reboot = $save_no_reboot;
+ return 0;
+ }
+ }
+ }
+ $no_reboot = $save_no_reboot;
+ close(IN);
+}
+
+sub check_patch_buildlog {
+ my ($patch) = @_;
+
+ my @files = `git show $patch | diffstat -l`;
+
+ foreach my $file (@files) {
+ chomp $file;
+ }
+
+ open(IN, "git show $patch |") or
+ dodie "failed to show $patch";
+ while (<IN>) {
+ if (m,^--- a/(.*),) {
+ chomp $1;
+ $files[$#files] = $1;
+ }
+ }
+ close(IN);
+
+ open(IN, $buildlog) or dodie "Can't open $buildlog";
+ while (<IN>) {
+ if (/^\s*(.*?):.*(warning|error)/) {
+ my $err = $1;
+ foreach my $file (@files) {
+ my $fullpath = "$builddir/$file";
+ if ($file eq $err || $fullpath eq $err) {
+ fail "$file built with warnings" and return 0;
+ }
+ }
+ }
+ }
+ close(IN);
+
+ return 1;
+}
+
+sub apply_min_config {
+ my $outconfig = "$output_config.new";
+
+ # Read the config file and remove anything that
+ # is in the force_config hash (from minconfig and others)
+ # then add the force config back.
+
+ doprint "Applying minimum configurations into $output_config.new\n";
+
+ open (OUT, ">$outconfig") or
+ dodie "Can't create $outconfig";
+
+ if (-f $output_config) {
+ open (IN, $output_config) or
+ dodie "Failed to open $output_config";
+ while (<IN>) {
+ if (/^(# )?(CONFIG_[^\s=]*)/) {
+ next if (defined($force_config{$2}));
+ }
+ print OUT;
+ }
+ close IN;
+ }
+ foreach my $config (keys %force_config) {
+ print OUT "$force_config{$config}\n";
+ }
+ close OUT;
+
+ run_command "mv $outconfig $output_config";
+}
+
+sub make_oldconfig {
+
+ my @force_list = keys %force_config;
+
+ if ($#force_list >= 0) {
+ apply_min_config;
+ }
+
+ if (!run_command "$make olddefconfig") {
+ # Perhaps olddefconfig doesn't exist in this version of the kernel
+ # try oldnoconfig
+ doprint "olddefconfig failed, trying make oldnoconfig\n";
+ if (!run_command "$make oldnoconfig") {
+ doprint "oldnoconfig failed, trying yes '' | make oldconfig\n";
+ # try a yes '' | oldconfig
+ run_command "yes '' | $make oldconfig" or
+ dodie "failed make config oldconfig";
+ }
+ }
+}
+
+# read a config file and use this to force new configs.
+sub load_force_config {
+ my ($config) = @_;
+
+ doprint "Loading force configs from $config\n";
+ open(IN, $config) or
+ dodie "failed to read $config";
+ while (<IN>) {
+ chomp;
+ if (/^(CONFIG[^\s=]*)(\s*=.*)/) {
+ $force_config{$1} = $_;
+ } elsif (/^# (CONFIG_\S*) is not set/) {
+ $force_config{$1} = $_;
+ }
+ }
+ close IN;
+}
+
+sub build {
+ my ($type) = @_;
+
+ unlink $buildlog;
+
+ my $start_time = time;
+
+ # Failed builds should not reboot the target
+ my $save_no_reboot = $no_reboot;
+ $no_reboot = 1;
+
+ # Calculate a new version from here.
+ $have_version = 0;
+
+ if (defined($pre_build)) {
+ my $ret = run_command $pre_build;
+ if (!$ret && defined($pre_build_die) &&
+ $pre_build_die) {
+ dodie "failed to pre_build\n";
+ }
+ }
+
+ if ($type =~ /^useconfig:(.*)/) {
+ run_command "cp $1 $output_config" or
+ dodie "could not copy $1 to .config";
+
+ $type = "oldconfig";
+ }
+
+ # old config can ask questions
+ if ($type eq "oldconfig") {
+ $type = "olddefconfig";
+
+ # allow for empty configs
+ run_command "touch $output_config";
+
+ if (!$noclean) {
+ run_command "mv $output_config $outputdir/config_temp" or
+ dodie "moving .config";
+
+ run_command "$make mrproper" or dodie "make mrproper";
+
+ run_command "mv $outputdir/config_temp $output_config" or
+ dodie "moving config_temp";
+ }
+
+ } elsif (!$noclean) {
+ unlink "$output_config";
+ run_command "$make mrproper" or
+ dodie "make mrproper";
+ }
+
+ # add something to distinguish this build
+ open(OUT, "> $outputdir/localversion") or dodie("Can't make localversion file");
+ print OUT "$localversion\n";
+ close(OUT);
+
+ if (defined($minconfig)) {
+ load_force_config($minconfig);
+ }
+
+ if ($type ne "olddefconfig") {
+ run_command "$make $type" or
+ dodie "failed make config";
+ }
+ # Run old config regardless, to enforce min configurations
+ make_oldconfig;
+
+ my $build_ret = run_command "$make $build_options", $buildlog;
+
+ if (defined($post_build)) {
+ # Because a post build may change the kernel version
+ # do it now.
+ get_version;
+ my $ret = run_command $post_build;
+ if (!$ret && defined($post_build_die) &&
+ $post_build_die) {
+ dodie "failed to post_build\n";
+ }
+ }
+
+ if (!$build_ret) {
+ # bisect may need this to pass
+ if ($in_bisect) {
+ $no_reboot = $save_no_reboot;
+ return 0;
+ }
+ fail "failed build" and return 0;
+ }
+
+ $no_reboot = $save_no_reboot;
+
+ my $end_time = time;
+ $build_time = $end_time - $start_time;
+
+ return 1;
+}
+
+sub halt {
+ if (!run_ssh "halt" or defined($power_off)) {
+ if (defined($poweroff_after_halt)) {
+ sleep $poweroff_after_halt;
+ run_command "$power_off";
+ }
+ } else {
+ # nope? the zap it!
+ run_command "$power_off";
+ }
+}
+
+sub success {
+ my ($i) = @_;
+
+ if (defined($post_test)) {
+ run_command $post_test;
+ }
+
+ $successes++;
+
+ my $name = "";
+
+ if (defined($test_name)) {
+ $name = " ($test_name)";
+ }
+
+ print_times;
+
+ doprint "\n\n*******************************************\n";
+ doprint "*******************************************\n";
+ doprint "KTEST RESULT: TEST $i$name SUCCESS!!!! **\n";
+ doprint "*******************************************\n";
+ doprint "*******************************************\n";
+
+ if (defined($store_successes)) {
+ save_logs "success", $store_successes;
+ }
+
+ if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) {
+ doprint "Reboot and wait $sleep_time seconds\n";
+ reboot_to_good $sleep_time;
+ }
+}
+
+sub answer_bisect {
+ for (;;) {
+ doprint "Pass, fail, or skip? [p/f/s]";
+ my $ans = <STDIN>;
+ chomp $ans;
+ if ($ans eq "p" || $ans eq "P") {
+ return 1;
+ } elsif ($ans eq "f" || $ans eq "F") {
+ return 0;
+ } elsif ($ans eq "s" || $ans eq "S") {
+ return -1;
+ } else {
+ print "Please answer 'p', 'f', or 's'\n";
+ }
+ }
+}
+
+sub child_run_test {
+ my $failed = 0;
+
+ # child should have no power
+ $reboot_on_error = 0;
+ $poweroff_on_error = 0;
+ $die_on_failure = 1;
+
+ run_command $run_test, $testlog or $failed = 1;
+
+ exit $failed;
+}
+
+my $child_done;
+
+sub child_finished {
+ $child_done = 1;
+}
+
+sub do_run_test {
+ my $child_pid;
+ my $child_exit;
+ my $line;
+ my $full_line;
+ my $bug = 0;
+ my $bug_ignored = 0;
+
+ my $start_time = time;
+
+ wait_for_monitor 1;
+
+ doprint "run test $run_test\n";
+
+ $child_done = 0;
+
+ $SIG{CHLD} = qw(child_finished);
+
+ $child_pid = fork;
+
+ child_run_test if (!$child_pid);
+
+ $full_line = "";
+
+ do {
+ $line = wait_for_input($monitor_fp, 1);
+ if (defined($line)) {
+
+ # we are not guaranteed to get a full line
+ $full_line .= $line;
+ doprint $line;
+
+ if ($full_line =~ /call trace:/i) {
+ if ($ignore_errors) {
+ $bug_ignored = 1;
+ } else {
+ $bug = 1;
+ }
+ }
+
+ if ($full_line =~ /Kernel panic -/) {
+ $bug = 1;
+ }
+
+ if ($line =~ /\n/) {
+ $full_line = "";
+ }
+ }
+ } while (!$child_done && !$bug);
+
+ if (!$bug && $bug_ignored) {
+ doprint "WARNING: Call Trace detected but ignored due to IGNORE_ERRORS=1\n";
+ }
+
+ if ($bug) {
+ my $failure_start = time;
+ my $now;
+ do {
+ $line = wait_for_input($monitor_fp, 1);
+ if (defined($line)) {
+ doprint $line;
+ }
+ $now = time;
+ if ($now - $failure_start >= $stop_after_failure) {
+ last;
+ }
+ } while (defined($line));
+
+ doprint "Detected kernel crash!\n";
+ # kill the child with extreme prejudice
+ kill 9, $child_pid;
+ }
+
+ waitpid $child_pid, 0;
+ $child_exit = $?;
+
+ my $end_time = time;
+ $test_time = $end_time - $start_time;
+
+ if (!$bug && $in_bisect) {
+ if (defined($bisect_ret_good)) {
+ if ($child_exit == $bisect_ret_good) {
+ return 1;
+ }
+ }
+ if (defined($bisect_ret_skip)) {
+ if ($child_exit == $bisect_ret_skip) {
+ return -1;
+ }
+ }
+ if (defined($bisect_ret_abort)) {
+ if ($child_exit == $bisect_ret_abort) {
+ fail "test abort" and return -2;
+ }
+ }
+ if (defined($bisect_ret_bad)) {
+ if ($child_exit == $bisect_ret_skip) {
+ return 0;
+ }
+ }
+ if (defined($bisect_ret_default)) {
+ if ($bisect_ret_default eq "good") {
+ return 1;
+ } elsif ($bisect_ret_default eq "bad") {
+ return 0;
+ } elsif ($bisect_ret_default eq "skip") {
+ return -1;
+ } elsif ($bisect_ret_default eq "abort") {
+ return -2;
+ } else {
+ fail "unknown default action: $bisect_ret_default"
+ and return -2;
+ }
+ }
+ }
+
+ if ($bug || $child_exit) {
+ return 0 if $in_bisect;
+ fail "test failed" and return 0;
+ }
+ return 1;
+}
+
+sub run_git_bisect {
+ my ($command) = @_;
+
+ doprint "$command ... ";
+
+ my $output = `$command 2>&1`;
+ my $ret = $?;
+
+ logit $output;
+
+ if ($ret) {
+ doprint "FAILED\n";
+ dodie "Failed to git bisect";
+ }
+
+ doprint "SUCCESS\n";
+ if ($output =~ m/^(Bisecting: .*\(roughly \d+ steps?\))\s+\[([[:xdigit:]]+)\]/) {
+ doprint "$1 [$2]\n";
+ } elsif ($output =~ m/^([[:xdigit:]]+) is the first bad commit/) {
+ $bisect_bad_commit = $1;
+ doprint "Found bad commit... $1\n";
+ return 0;
+ } else {
+ # we already logged it, just print it now.
+ print $output;
+ }
+
+ return 1;
+}
+
+sub bisect_reboot {
+ doprint "Reboot and sleep $bisect_sleep_time seconds\n";
+ reboot_to_good $bisect_sleep_time;
+}
+
+# returns 1 on success, 0 on failure, -1 on skip
+sub run_bisect_test {
+ my ($type, $buildtype) = @_;
+
+ my $failed = 0;
+ my $result;
+ my $output;
+ my $ret;
+
+ $in_bisect = 1;
+
+ build $buildtype or $failed = 1;
+
+ if ($type ne "build") {
+ if ($failed && $bisect_skip) {
+ $in_bisect = 0;
+ return -1;
+ }
+ dodie "Failed on build" if $failed;
+
+ # Now boot the box
+ start_monitor_and_install or $failed = 1;
+
+ if ($type ne "boot") {
+ if ($failed && $bisect_skip) {
+ end_monitor;
+ bisect_reboot;
+ $in_bisect = 0;
+ return -1;
+ }
+ dodie "Failed on boot" if $failed;
+
+ do_run_test or $failed = 1;
+ }
+ end_monitor;
+ }
+
+ if ($failed) {
+ $result = 0;
+ } else {
+ $result = 1;
+ }
+
+ # reboot the box to a kernel we can ssh to
+ if ($type ne "build") {
+ bisect_reboot;
+ }
+ $in_bisect = 0;
+
+ return $result;
+}
+
+sub run_bisect {
+ my ($type) = @_;
+ my $buildtype = "oldconfig";
+
+ # We should have a minconfig to use?
+ if (defined($minconfig)) {
+ $buildtype = "useconfig:$minconfig";
+ }
+
+ # If the user sets bisect_tries to less than 1, then no tries
+ # is a success.
+ my $ret = 1;
+
+ # Still let the user manually decide that though.
+ if ($bisect_tries < 1 && $bisect_manual) {
+ $ret = answer_bisect;
+ }
+
+ for (my $i = 0; $i < $bisect_tries; $i++) {
+ if ($bisect_tries > 1) {
+ my $t = $i + 1;
+ doprint("Running bisect trial $t of $bisect_tries:\n");
+ }
+ $ret = run_bisect_test $type, $buildtype;
+
+ if ($bisect_manual) {
+ $ret = answer_bisect;
+ }
+
+ last if (!$ret);
+ }
+
+ # Are we looking for where it worked, not failed?
+ if ($reverse_bisect && $ret >= 0) {
+ $ret = !$ret;
+ }
+
+ if ($ret > 0) {
+ return "good";
+ } elsif ($ret == 0) {
+ return "bad";
+ } elsif ($bisect_skip) {
+ doprint "HIT A BAD COMMIT ... SKIPPING\n";
+ return "skip";
+ }
+}
+
+sub update_bisect_replay {
+ my $tmp_log = "$tmpdir/ktest_bisect_log";
+ run_command "git bisect log > $tmp_log" or
+ die "can't create bisect log";
+ return $tmp_log;
+}
+
+sub bisect {
+ my ($i) = @_;
+
+ my $result;
+
+ die "BISECT_GOOD[$i] not defined\n" if (!defined($bisect_good));
+ die "BISECT_BAD[$i] not defined\n" if (!defined($bisect_bad));
+ die "BISECT_TYPE[$i] not defined\n" if (!defined($bisect_type));
+
+ my $good = $bisect_good;
+ my $bad = $bisect_bad;
+ my $type = $bisect_type;
+ my $start = $bisect_start;
+ my $replay = $bisect_replay;
+ my $start_files = $bisect_files;
+
+ if (defined($start_files)) {
+ $start_files = " -- " . $start_files;
+ } else {
+ $start_files = "";
+ }
+
+ # convert to true sha1's
+ $good = get_sha1($good);
+ $bad = get_sha1($bad);
+
+ if (defined($bisect_reverse) && $bisect_reverse == 1) {
+ doprint "Performing a reverse bisect (bad is good, good is bad!)\n";
+ $reverse_bisect = 1;
+ } else {
+ $reverse_bisect = 0;
+ }
+
+ # Can't have a test without having a test to run
+ if ($type eq "test" && !defined($run_test)) {
+ $type = "boot";
+ }
+
+ # Check if a bisect was running
+ my $bisect_start_file = "$builddir/.git/BISECT_START";
+
+ my $check = $bisect_check;
+ my $do_check = defined($check) && $check ne "0";
+
+ if ( -f $bisect_start_file ) {
+ print "Bisect in progress found\n";
+ if ($do_check) {
+ print " If you say yes, then no checks of good or bad will be done\n";
+ }
+ if (defined($replay)) {
+ print "** BISECT_REPLAY is defined in config file **";
+ print " Ignore config option and perform new git bisect log?\n";
+ if (read_ync " (yes, no, or cancel) ") {
+ $replay = update_bisect_replay;
+ $do_check = 0;
+ }
+ } elsif (read_yn "read git log and continue?") {
+ $replay = update_bisect_replay;
+ $do_check = 0;
+ }
+ }
+
+ if ($do_check) {
+
+ # get current HEAD
+ my $head = get_sha1("HEAD");
+
+ if ($check ne "good") {
+ doprint "TESTING BISECT BAD [$bad]\n";
+ run_command "git checkout $bad" or
+ die "Failed to checkout $bad";
+
+ $result = run_bisect $type;
+
+ if ($result ne "bad") {
+ fail "Tested BISECT_BAD [$bad] and it succeeded" and return 0;
+ }
+ }
+
+ if ($check ne "bad") {
+ doprint "TESTING BISECT GOOD [$good]\n";
+ run_command "git checkout $good" or
+ die "Failed to checkout $good";
+
+ $result = run_bisect $type;
+
+ if ($result ne "good") {
+ fail "Tested BISECT_GOOD [$good] and it failed" and return 0;
+ }
+ }
+
+ # checkout where we started
+ run_command "git checkout $head" or
+ die "Failed to checkout $head";
+ }
+
+ run_command "git bisect start$start_files" or
+ dodie "could not start bisect";
+
+ if (defined($replay)) {
+ run_command "git bisect replay $replay" or
+ dodie "failed to run replay";
+ } else {
+
+ run_command "git bisect good $good" or
+ dodie "could not set bisect good to $good";
+
+ run_git_bisect "git bisect bad $bad" or
+ dodie "could not set bisect bad to $bad";
+
+ }
+
+ if (defined($start)) {
+ run_command "git checkout $start" or
+ dodie "failed to checkout $start";
+ }
+
+ my $test;
+ do {
+ $result = run_bisect $type;
+ $test = run_git_bisect "git bisect $result";
+ print_times;
+ } while ($test);
+
+ run_command "git bisect log" or
+ dodie "could not capture git bisect log";
+
+ run_command "git bisect reset" or
+ dodie "could not reset git bisect";
+
+ doprint "Bad commit was [$bisect_bad_commit]\n";
+
+ success $i;
+}
+
+# config_ignore holds the configs that were set (or unset) for
+# a good config and we will ignore these configs for the rest
+# of a config bisect. These configs stay as they were.
+my %config_ignore;
+
+# config_set holds what all configs were set as.
+my %config_set;
+
+# config_off holds the set of configs that the bad config had disabled.
+# We need to record them and set them in the .config when running
+# olddefconfig, because olddefconfig keeps the defaults.
+my %config_off;
+
+# config_off_tmp holds a set of configs to turn off for now
+my @config_off_tmp;
+
+# config_list is the set of configs that are being tested
+my %config_list;
+my %null_config;
+
+my %dependency;
+
+sub assign_configs {
+ my ($hash, $config) = @_;
+
+ doprint "Reading configs from $config\n";
+
+ open (IN, $config)
+ or dodie "Failed to read $config";
+
+ while (<IN>) {
+ chomp;
+ if (/^((CONFIG\S*)=.*)/) {
+ ${$hash}{$2} = $1;
+ } elsif (/^(# (CONFIG\S*) is not set)/) {
+ ${$hash}{$2} = $1;
+ }
+ }
+
+ close(IN);
+}
+
+sub process_config_ignore {
+ my ($config) = @_;
+
+ assign_configs \%config_ignore, $config;
+}
+
+sub get_dependencies {
+ my ($config) = @_;
+
+ my $arr = $dependency{$config};
+ if (!defined($arr)) {
+ return ();
+ }
+
+ my @deps = @{$arr};
+
+ foreach my $dep (@{$arr}) {
+ print "ADD DEP $dep\n";
+ @deps = (@deps, get_dependencies $dep);
+ }
+
+ return @deps;
+}
+
+sub save_config {
+ my ($pc, $file) = @_;
+
+ my %configs = %{$pc};
+
+ doprint "Saving configs into $file\n";
+
+ open(OUT, ">$file") or dodie "Can not write to $file";
+
+ foreach my $config (keys %configs) {
+ print OUT "$configs{$config}\n";
+ }
+ close(OUT);
+}
+
+sub create_config {
+ my ($name, $pc) = @_;
+
+ doprint "Creating old config from $name configs\n";
+
+ save_config $pc, $output_config;
+
+ make_oldconfig;
+}
+
+# compare two config hashes, and return configs with different vals.
+# It returns B's config values, but you can use A to see what A was.
+sub diff_config_vals {
+ my ($pa, $pb) = @_;
+
+ # crappy Perl way to pass in hashes.
+ my %a = %{$pa};
+ my %b = %{$pb};
+
+ my %ret;
+
+ foreach my $item (keys %a) {
+ if (defined($b{$item}) && $b{$item} ne $a{$item}) {
+ $ret{$item} = $b{$item};
+ }
+ }
+
+ return %ret;
+}
+
+# compare two config hashes and return the configs in B but not A
+sub diff_configs {
+ my ($pa, $pb) = @_;
+
+ my %ret;
+
+ # crappy Perl way to pass in hashes.
+ my %a = %{$pa};
+ my %b = %{$pb};
+
+ foreach my $item (keys %b) {
+ if (!defined($a{$item})) {
+ $ret{$item} = $b{$item};
+ }
+ }
+
+ return %ret;
+}
+
+# return if two configs are equal or not
+# 0 is equal +1 b has something a does not
+# +1 if a and b have a different item.
+# -1 if a has something b does not
+sub compare_configs {
+ my ($pa, $pb) = @_;
+
+ my %ret;
+
+ # crappy Perl way to pass in hashes.
+ my %a = %{$pa};
+ my %b = %{$pb};
+
+ foreach my $item (keys %b) {
+ if (!defined($a{$item})) {
+ return 1;
+ }
+ if ($a{$item} ne $b{$item}) {
+ return 1;
+ }
+ }
+
+ foreach my $item (keys %a) {
+ if (!defined($b{$item})) {
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+sub run_config_bisect_test {
+ my ($type) = @_;
+
+ my $ret = run_bisect_test $type, "oldconfig";
+
+ if ($bisect_manual) {
+ $ret = answer_bisect;
+ }
+
+ return $ret;
+}
+
+sub process_failed {
+ my ($config) = @_;
+
+ doprint "\n\n***************************************\n";
+ doprint "Found bad config: $config\n";
+ doprint "***************************************\n\n";
+}
+
+# used for config bisecting
+my $good_config;
+my $bad_config;
+
+sub process_new_config {
+ my ($tc, $nc, $gc, $bc) = @_;
+
+ my %tmp_config = %{$tc};
+ my %good_configs = %{$gc};
+ my %bad_configs = %{$bc};
+
+ my %new_configs;
+
+ my $runtest = 1;
+ my $ret;
+
+ create_config "tmp_configs", \%tmp_config;
+ assign_configs \%new_configs, $output_config;
+
+ $ret = compare_configs \%new_configs, \%bad_configs;
+ if (!$ret) {
+ doprint "New config equals bad config, try next test\n";
+ $runtest = 0;
+ }
+
+ if ($runtest) {
+ $ret = compare_configs \%new_configs, \%good_configs;
+ if (!$ret) {
+ doprint "New config equals good config, try next test\n";
+ $runtest = 0;
+ }
+ }
+
+ %{$nc} = %new_configs;
+
+ return $runtest;
+}
+
+sub run_config_bisect {
+ my ($pgood, $pbad) = @_;
+
+ my $type = $config_bisect_type;
+
+ my %good_configs = %{$pgood};
+ my %bad_configs = %{$pbad};
+
+ my %diff_configs = diff_config_vals \%good_configs, \%bad_configs;
+ my %b_configs = diff_configs \%good_configs, \%bad_configs;
+ my %g_configs = diff_configs \%bad_configs, \%good_configs;
+
+ my @diff_arr = keys %diff_configs;
+ my $len_diff = $#diff_arr + 1;
+
+ my @b_arr = keys %b_configs;
+ my $len_b = $#b_arr + 1;
+
+ my @g_arr = keys %g_configs;
+ my $len_g = $#g_arr + 1;
+
+ my $runtest = 1;
+ my %new_configs;
+ my $ret;
+
+ # First, lets get it down to a single subset.
+ # Is the problem with a difference in values?
+ # Is the problem with a missing config?
+ # Is the problem with a config that breaks things?
+
+ # Enable all of one set and see if we get a new bad
+ # or good config.
+
+ # first set the good config to the bad values.
+
+ doprint "d=$len_diff g=$len_g b=$len_b\n";
+
+ # first lets enable things in bad config that are enabled in good config
+
+ if ($len_diff > 0) {
+ if ($len_b > 0 || $len_g > 0) {
+ my %tmp_config = %bad_configs;
+
+ doprint "Set tmp config to be bad config with good config values\n";
+ foreach my $item (@diff_arr) {
+ $tmp_config{$item} = $good_configs{$item};
+ }
+
+ $runtest = process_new_config \%tmp_config, \%new_configs,
+ \%good_configs, \%bad_configs;
+ }
+ }
+
+ if (!$runtest && $len_diff > 0) {
+
+ if ($len_diff == 1) {
+ process_failed $diff_arr[0];
+ return 1;
+ }
+ my %tmp_config = %bad_configs;
+
+ my $half = int($#diff_arr / 2);
+ my @tophalf = @diff_arr[0 .. $half];
+
+ doprint "Settings bisect with top half:\n";
+ doprint "Set tmp config to be bad config with some good config values\n";
+ foreach my $item (@tophalf) {
+ $tmp_config{$item} = $good_configs{$item};
+ }
+
+ $runtest = process_new_config \%tmp_config, \%new_configs,
+ \%good_configs, \%bad_configs;
+
+ if (!$runtest) {
+ my %tmp_config = %bad_configs;
+
+ doprint "Try bottom half\n";
+
+ my @bottomhalf = @diff_arr[$half+1 .. $#diff_arr];
+
+ foreach my $item (@bottomhalf) {
+ $tmp_config{$item} = $good_configs{$item};
+ }
+
+ $runtest = process_new_config \%tmp_config, \%new_configs,
+ \%good_configs, \%bad_configs;
+ }
+ }
+
+ if ($runtest) {
+ $ret = run_config_bisect_test $type;
+ if ($ret) {
+ doprint "NEW GOOD CONFIG\n";
+ %good_configs = %new_configs;
+ run_command "mv $good_config ${good_config}.last";
+ save_config \%good_configs, $good_config;
+ %{$pgood} = %good_configs;
+ } else {
+ doprint "NEW BAD CONFIG\n";
+ %bad_configs = %new_configs;
+ run_command "mv $bad_config ${bad_config}.last";
+ save_config \%bad_configs, $bad_config;
+ %{$pbad} = %bad_configs;
+ }
+ return 0;
+ }
+
+ fail "Hmm, need to do a mix match?\n";
+ return -1;
+}
+
+sub config_bisect {
+ my ($i) = @_;
+
+ my $type = $config_bisect_type;
+ my $ret;
+
+ $bad_config = $config_bisect;
+
+ if (defined($config_bisect_good)) {
+ $good_config = $config_bisect_good;
+ } elsif (defined($minconfig)) {
+ $good_config = $minconfig;
+ } else {
+ doprint "No config specified, checking if defconfig works";
+ $ret = run_bisect_test $type, "defconfig";
+ if (!$ret) {
+ fail "Have no good config to compare with, please set CONFIG_BISECT_GOOD";
+ return 1;
+ }
+ $good_config = $output_config;
+ }
+
+ # we don't want min configs to cause issues here.
+ doprint "Disabling 'MIN_CONFIG' for this test\n";
+ undef $minconfig;
+
+ my %good_configs;
+ my %bad_configs;
+ my %tmp_configs;
+
+ doprint "Run good configs through make oldconfig\n";
+ assign_configs \%tmp_configs, $good_config;
+ create_config "$good_config", \%tmp_configs;
+ assign_configs \%good_configs, $output_config;
+
+ doprint "Run bad configs through make oldconfig\n";
+ assign_configs \%tmp_configs, $bad_config;
+ create_config "$bad_config", \%tmp_configs;
+ assign_configs \%bad_configs, $output_config;
+
+ $good_config = "$tmpdir/good_config";
+ $bad_config = "$tmpdir/bad_config";
+
+ save_config \%good_configs, $good_config;
+ save_config \%bad_configs, $bad_config;
+
+
+ if (defined($config_bisect_check) && $config_bisect_check ne "0") {
+ if ($config_bisect_check ne "good") {
+ doprint "Testing bad config\n";
+
+ $ret = run_bisect_test $type, "useconfig:$bad_config";
+ if ($ret) {
+ fail "Bad config succeeded when expected to fail!";
+ return 0;
+ }
+ }
+ if ($config_bisect_check ne "bad") {
+ doprint "Testing good config\n";
+
+ $ret = run_bisect_test $type, "useconfig:$good_config";
+ if (!$ret) {
+ fail "Good config failed when expected to succeed!";
+ return 0;
+ }
+ }
+ }
+
+ do {
+ $ret = run_config_bisect \%good_configs, \%bad_configs;
+ print_times;
+ } while (!$ret);
+
+ return $ret if ($ret < 0);
+
+ success $i;
+}
+
+sub patchcheck_reboot {
+ doprint "Reboot and sleep $patchcheck_sleep_time seconds\n";
+ reboot_to_good $patchcheck_sleep_time;
+}
+
+sub patchcheck {
+ my ($i) = @_;
+
+ die "PATCHCHECK_START[$i] not defined\n"
+ if (!defined($patchcheck_start));
+ die "PATCHCHECK_TYPE[$i] not defined\n"
+ if (!defined($patchcheck_type));
+
+ my $start = $patchcheck_start;
+
+ my $cherry = $patchcheck_cherry;
+ if (!defined($cherry)) {
+ $cherry = 0;
+ }
+
+ my $end = "HEAD";
+ if (defined($patchcheck_end)) {
+ $end = $patchcheck_end;
+ } elsif ($cherry) {
+ die "PATCHCHECK_END must be defined with PATCHCHECK_CHERRY\n";
+ }
+
+ # Get the true sha1's since we can use things like HEAD~3
+ $start = get_sha1($start);
+ $end = get_sha1($end);
+
+ my $type = $patchcheck_type;
+
+ # Can't have a test without having a test to run
+ if ($type eq "test" && !defined($run_test)) {
+ $type = "boot";
+ }
+
+ if ($cherry) {
+ open (IN, "git cherry -v $start $end|") or
+ dodie "could not get git list";
+ } else {
+ open (IN, "git log --pretty=oneline $end|") or
+ dodie "could not get git list";
+ }
+
+ my @list;
+
+ while (<IN>) {
+ chomp;
+ # git cherry adds a '+' we want to remove
+ s/^\+ //;
+ $list[$#list+1] = $_;
+ last if (/^$start/);
+ }
+ close(IN);
+
+ if (!$cherry) {
+ if ($list[$#list] !~ /^$start/) {
+ fail "SHA1 $start not found";
+ }
+
+ # go backwards in the list
+ @list = reverse @list;
+ }
+
+ doprint("Going to test the following commits:\n");
+ foreach my $l (@list) {
+ doprint "$l\n";
+ }
+
+ my $save_clean = $noclean;
+ my %ignored_warnings;
+
+ if (defined($ignore_warnings)) {
+ foreach my $sha1 (split /\s+/, $ignore_warnings) {
+ $ignored_warnings{$sha1} = 1;
+ }
+ }
+
+ $in_patchcheck = 1;
+ foreach my $item (@list) {
+ my $sha1 = $item;
+ $sha1 =~ s/^([[:xdigit:]]+).*/$1/;
+
+ doprint "\nProcessing commit \"$item\"\n\n";
+
+ run_command "git checkout $sha1" or
+ die "Failed to checkout $sha1";
+
+ # only clean on the first and last patch
+ if ($item eq $list[0] ||
+ $item eq $list[$#list]) {
+ $noclean = $save_clean;
+ } else {
+ $noclean = 1;
+ }
+
+ if (defined($minconfig)) {
+ build "useconfig:$minconfig" or return 0;
+ } else {
+ # ?? no config to use?
+ build "oldconfig" or return 0;
+ }
+
+ # No need to do per patch checking if warnings file exists
+ if (!defined($warnings_file) && !defined($ignored_warnings{$sha1})) {
+ check_patch_buildlog $sha1 or return 0;
+ }
+
+ check_buildlog or return 0;
+
+ next if ($type eq "build");
+
+ my $failed = 0;
+
+ start_monitor_and_install or $failed = 1;
+
+ if (!$failed && $type ne "boot"){
+ do_run_test or $failed = 1;
+ }
+ end_monitor;
+ if ($failed) {
+ print_times;
+ return 0;
+ }
+ patchcheck_reboot;
+ print_times;
+ }
+ $in_patchcheck = 0;
+ success $i;
+
+ return 1;
+}
+
+my %depends;
+my %depcount;
+my $iflevel = 0;
+my @ifdeps;
+
+# prevent recursion
+my %read_kconfigs;
+
+sub add_dep {
+ # $config depends on $dep
+ my ($config, $dep) = @_;
+
+ if (defined($depends{$config})) {
+ $depends{$config} .= " " . $dep;
+ } else {
+ $depends{$config} = $dep;
+ }
+
+ # record the number of configs depending on $dep
+ if (defined $depcount{$dep}) {
+ $depcount{$dep}++;
+ } else {
+ $depcount{$dep} = 1;
+ }
+}
+
+# taken from streamline_config.pl
+sub read_kconfig {
+ my ($kconfig) = @_;
+
+ my $state = "NONE";
+ my $config;
+ my @kconfigs;
+
+ my $cont = 0;
+ my $line;
+
+
+ if (! -f $kconfig) {
+ doprint "file $kconfig does not exist, skipping\n";
+ return;
+ }
+
+ open(KIN, "$kconfig")
+ or die "Can't open $kconfig";
+ while (<KIN>) {
+ chomp;
+
+ # Make sure that lines ending with \ continue
+ if ($cont) {
+ $_ = $line . " " . $_;
+ }
+
+ if (s/\\$//) {
+ $cont = 1;
+ $line = $_;
+ next;
+ }
+
+ $cont = 0;
+
+ # collect any Kconfig sources
+ if (/^source\s*"(.*)"/) {
+ $kconfigs[$#kconfigs+1] = $1;
+ }
+
+ # configs found
+ if (/^\s*(menu)?config\s+(\S+)\s*$/) {
+ $state = "NEW";
+ $config = $2;
+
+ for (my $i = 0; $i < $iflevel; $i++) {
+ add_dep $config, $ifdeps[$i];
+ }
+
+ # collect the depends for the config
+ } elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) {
+
+ add_dep $config, $1;
+
+ # Get the configs that select this config
+ } elsif ($state eq "NEW" && /^\s*select\s+(\S+)/) {
+
+ # selected by depends on config
+ add_dep $1, $config;
+
+ # Check for if statements
+ } elsif (/^if\s+(.*\S)\s*$/) {
+ my $deps = $1;
+ # remove beginning and ending non text
+ $deps =~ s/^[^a-zA-Z0-9_]*//;
+ $deps =~ s/[^a-zA-Z0-9_]*$//;
+
+ my @deps = split /[^a-zA-Z0-9_]+/, $deps;
+
+ $ifdeps[$iflevel++] = join ':', @deps;
+
+ } elsif (/^endif/) {
+
+ $iflevel-- if ($iflevel);
+
+ # stop on "help"
+ } elsif (/^\s*help\s*$/) {
+ $state = "NONE";
+ }
+ }
+ close(KIN);
+
+ # read in any configs that were found.
+ foreach $kconfig (@kconfigs) {
+ if (!defined($read_kconfigs{$kconfig})) {
+ $read_kconfigs{$kconfig} = 1;
+ read_kconfig("$builddir/$kconfig");
+ }
+ }
+}
+
+sub read_depends {
+ # find out which arch this is by the kconfig file
+ open (IN, $output_config)
+ or dodie "Failed to read $output_config";
+ my $arch;
+ while (<IN>) {
+ if (m,Linux/(\S+)\s+\S+\s+Kernel Configuration,) {
+ $arch = $1;
+ last;
+ }
+ }
+ close IN;
+
+ if (!defined($arch)) {
+ doprint "Could not find arch from config file\n";
+ doprint "no dependencies used\n";
+ return;
+ }
+
+ # arch is really the subarch, we need to know
+ # what directory to look at.
+ if ($arch eq "i386" || $arch eq "x86_64") {
+ $arch = "x86";
+ } elsif ($arch =~ /^tile/) {
+ $arch = "tile";
+ }
+
+ my $kconfig = "$builddir/arch/$arch/Kconfig";
+
+ if (! -f $kconfig && $arch =~ /\d$/) {
+ my $orig = $arch;
+ # some subarchs have numbers, truncate them
+ $arch =~ s/\d*$//;
+ $kconfig = "$builddir/arch/$arch/Kconfig";
+ if (! -f $kconfig) {
+ doprint "No idea what arch dir $orig is for\n";
+ doprint "no dependencies used\n";
+ return;
+ }
+ }
+
+ read_kconfig($kconfig);
+}
+
+sub make_new_config {
+ my @configs = @_;
+
+ open (OUT, ">$output_config")
+ or dodie "Failed to write $output_config";
+
+ foreach my $config (@configs) {
+ print OUT "$config\n";
+ }
+ close OUT;
+}
+
+sub chomp_config {
+ my ($config) = @_;
+
+ $config =~ s/CONFIG_//;
+
+ return $config;
+}
+
+sub get_depends {
+ my ($dep) = @_;
+
+ my $kconfig = chomp_config $dep;
+
+ $dep = $depends{"$kconfig"};
+
+ # the dep string we have saves the dependencies as they
+ # were found, including expressions like ! && ||. We
+ # want to split this out into just an array of configs.
+
+ my $valid = "A-Za-z_0-9";
+
+ my @configs;
+
+ while ($dep =~ /[$valid]/) {
+
+ if ($dep =~ /^[^$valid]*([$valid]+)/) {
+ my $conf = "CONFIG_" . $1;
+
+ $configs[$#configs + 1] = $conf;
+
+ $dep =~ s/^[^$valid]*[$valid]+//;
+ } else {
+ die "this should never happen";
+ }
+ }
+
+ return @configs;
+}
+
+my %min_configs;
+my %keep_configs;
+my %save_configs;
+my %processed_configs;
+my %nochange_config;
+
+sub test_this_config {
+ my ($config) = @_;
+
+ my $found;
+
+ # if we already processed this config, skip it
+ if (defined($processed_configs{$config})) {
+ return undef;
+ }
+ $processed_configs{$config} = 1;
+
+ # if this config failed during this round, skip it
+ if (defined($nochange_config{$config})) {
+ return undef;
+ }
+
+ my $kconfig = chomp_config $config;
+
+ # Test dependencies first
+ if (defined($depends{"$kconfig"})) {
+ my @parents = get_depends $config;
+ foreach my $parent (@parents) {
+ # if the parent is in the min config, check it first
+ next if (!defined($min_configs{$parent}));
+ $found = test_this_config($parent);
+ if (defined($found)) {
+ return $found;
+ }
+ }
+ }
+
+ # Remove this config from the list of configs
+ # do a make olddefconfig and then read the resulting
+ # .config to make sure it is missing the config that
+ # we had before
+ my %configs = %min_configs;
+ delete $configs{$config};
+ make_new_config ((values %configs), (values %keep_configs));
+ make_oldconfig;
+ undef %configs;
+ assign_configs \%configs, $output_config;
+
+ if (!defined($configs{$config}) || $configs{$config} =~ /^#/) {
+ return $config;
+ }
+
+ doprint "disabling config $config did not change .config\n";
+
+ $nochange_config{$config} = 1;
+
+ return undef;
+}
+
+sub make_min_config {
+ my ($i) = @_;
+
+ my $type = $minconfig_type;
+ if ($type ne "boot" && $type ne "test") {
+ fail "Invalid MIN_CONFIG_TYPE '$minconfig_type'\n" .
+ " make_min_config works only with 'boot' and 'test'\n" and return;
+ }
+
+ if (!defined($output_minconfig)) {
+ fail "OUTPUT_MIN_CONFIG not defined" and return;
+ }
+
+ # If output_minconfig exists, and the start_minconfig
+ # came from min_config, than ask if we should use
+ # that instead.
+ if (-f $output_minconfig && !$start_minconfig_defined) {
+ print "$output_minconfig exists\n";
+ if (!defined($use_output_minconfig)) {
+ if (read_yn " Use it as minconfig?") {
+ $start_minconfig = $output_minconfig;
+ }
+ } elsif ($use_output_minconfig > 0) {
+ doprint "Using $output_minconfig as MIN_CONFIG\n";
+ $start_minconfig = $output_minconfig;
+ } else {
+ doprint "Set to still use MIN_CONFIG as starting point\n";
+ }
+ }
+
+ if (!defined($start_minconfig)) {
+ fail "START_MIN_CONFIG or MIN_CONFIG not defined" and return;
+ }
+
+ my $temp_config = "$tmpdir/temp_config";
+
+ # First things first. We build an allnoconfig to find
+ # out what the defaults are that we can't touch.
+ # Some are selections, but we really can't handle selections.
+
+ my $save_minconfig = $minconfig;
+ undef $minconfig;
+
+ run_command "$make allnoconfig" or return 0;
+
+ read_depends;
+
+ process_config_ignore $output_config;
+
+ undef %save_configs;
+ undef %min_configs;
+
+ if (defined($ignore_config)) {
+ # make sure the file exists
+ `touch $ignore_config`;
+ assign_configs \%save_configs, $ignore_config;
+ }
+
+ %keep_configs = %save_configs;
+
+ doprint "Load initial configs from $start_minconfig\n";
+
+ # Look at the current min configs, and save off all the
+ # ones that were set via the allnoconfig
+ assign_configs \%min_configs, $start_minconfig;
+
+ my @config_keys = keys %min_configs;
+
+ # All configs need a depcount
+ foreach my $config (@config_keys) {
+ my $kconfig = chomp_config $config;
+ if (!defined $depcount{$kconfig}) {
+ $depcount{$kconfig} = 0;
+ }
+ }
+
+ # Remove anything that was set by the make allnoconfig
+ # we shouldn't need them as they get set for us anyway.
+ foreach my $config (@config_keys) {
+ # Remove anything in the ignore_config
+ if (defined($keep_configs{$config})) {
+ my $file = $ignore_config;
+ $file =~ s,.*/(.*?)$,$1,;
+ doprint "$config set by $file ... ignored\n";
+ delete $min_configs{$config};
+ next;
+ }
+ # But make sure the settings are the same. If a min config
+ # sets a selection, we do not want to get rid of it if
+ # it is not the same as what we have. Just move it into
+ # the keep configs.
+ if (defined($config_ignore{$config})) {
+ if ($config_ignore{$config} ne $min_configs{$config}) {
+ doprint "$config is in allnoconfig as '$config_ignore{$config}'";
+ doprint " but it is '$min_configs{$config}' in minconfig .. keeping\n";
+ $keep_configs{$config} = $min_configs{$config};
+ } else {
+ doprint "$config set by allnoconfig ... ignored\n";
+ }
+ delete $min_configs{$config};
+ }
+ }
+
+ my $done = 0;
+ my $take_two = 0;
+
+ while (!$done) {
+
+ my $config;
+ my $found;
+
+ # Now disable each config one by one and do a make oldconfig
+ # till we find a config that changes our list.
+
+ my @test_configs = keys %min_configs;
+
+ # Sort keys by who is most dependent on
+ @test_configs = sort { $depcount{chomp_config($b)} <=> $depcount{chomp_config($a)} }
+ @test_configs ;
+
+ # Put configs that did not modify the config at the end.
+ my $reset = 1;
+ for (my $i = 0; $i < $#test_configs; $i++) {
+ if (!defined($nochange_config{$test_configs[0]})) {
+ $reset = 0;
+ last;
+ }
+ # This config didn't change the .config last time.
+ # Place it at the end
+ my $config = shift @test_configs;
+ push @test_configs, $config;
+ }
+
+ # if every test config has failed to modify the .config file
+ # in the past, then reset and start over.
+ if ($reset) {
+ undef %nochange_config;
+ }
+
+ undef %processed_configs;
+
+ foreach my $config (@test_configs) {
+
+ $found = test_this_config $config;
+
+ last if (defined($found));
+
+ # oh well, try another config
+ }
+
+ if (!defined($found)) {
+ # we could have failed due to the nochange_config hash
+ # reset and try again
+ if (!$take_two) {
+ undef %nochange_config;
+ $take_two = 1;
+ next;
+ }
+ doprint "No more configs found that we can disable\n";
+ $done = 1;
+ last;
+ }
+ $take_two = 0;
+
+ $config = $found;
+
+ doprint "Test with $config disabled\n";
+
+ # set in_bisect to keep build and monitor from dieing
+ $in_bisect = 1;
+
+ my $failed = 0;
+ build "oldconfig" or $failed = 1;
+ if (!$failed) {
+ start_monitor_and_install or $failed = 1;
+
+ if ($type eq "test" && !$failed) {
+ do_run_test or $failed = 1;
+ }
+
+ end_monitor;
+ }
+
+ $in_bisect = 0;
+
+ if ($failed) {
+ doprint "$min_configs{$config} is needed to boot the box... keeping\n";
+ # this config is needed, add it to the ignore list.
+ $keep_configs{$config} = $min_configs{$config};
+ $save_configs{$config} = $min_configs{$config};
+ delete $min_configs{$config};
+
+ # update new ignore configs
+ if (defined($ignore_config)) {
+ open (OUT, ">$temp_config")
+ or die "Can't write to $temp_config";
+ foreach my $config (keys %save_configs) {
+ print OUT "$save_configs{$config}\n";
+ }
+ close OUT;
+ run_command "mv $temp_config $ignore_config" or
+ dodie "failed to copy update to $ignore_config";
+ }
+
+ } else {
+ # We booted without this config, remove it from the minconfigs.
+ doprint "$config is not needed, disabling\n";
+
+ delete $min_configs{$config};
+
+ # Also disable anything that is not enabled in this config
+ my %configs;
+ assign_configs \%configs, $output_config;
+ my @config_keys = keys %min_configs;
+ foreach my $config (@config_keys) {
+ if (!defined($configs{$config})) {
+ doprint "$config is not set, disabling\n";
+ delete $min_configs{$config};
+ }
+ }
+
+ # Save off all the current mandidory configs
+ open (OUT, ">$temp_config")
+ or die "Can't write to $temp_config";
+ foreach my $config (keys %keep_configs) {
+ print OUT "$keep_configs{$config}\n";
+ }
+ foreach my $config (keys %min_configs) {
+ print OUT "$min_configs{$config}\n";
+ }
+ close OUT;
+
+ run_command "mv $temp_config $output_minconfig" or
+ dodie "failed to copy update to $output_minconfig";
+ }
+
+ doprint "Reboot and wait $sleep_time seconds\n";
+ reboot_to_good $sleep_time;
+ }
+
+ success $i;
+ return 1;
+}
+
+sub make_warnings_file {
+ my ($i) = @_;
+
+ if (!defined($warnings_file)) {
+ dodie "Must define WARNINGS_FILE for make_warnings_file test";
+ }
+
+ if ($build_type eq "nobuild") {
+ dodie "BUILD_TYPE can not be 'nobuild' for make_warnings_file test";
+ }
+
+ build $build_type or dodie "Failed to build";
+
+ open(OUT, ">$warnings_file") or dodie "Can't create $warnings_file";
+
+ open(IN, $buildlog) or dodie "Can't open $buildlog";
+ while (<IN>) {
+
+ # Some compilers use UTF-8 extended for quotes
+ # for distcc heterogeneous systems, this causes issues
+ s/$utf8_quote/'/g;
+
+ if (/$check_build_re/) {
+ print OUT;
+ }
+ }
+ close(IN);
+
+ close(OUT);
+
+ success $i;
+}
+
+$#ARGV < 1 or die "ktest.pl version: $VERSION\n usage: ktest.pl [config-file]\n";
+
+if ($#ARGV == 0) {
+ $ktest_config = $ARGV[0];
+ if (! -f $ktest_config) {
+ print "$ktest_config does not exist.\n";
+ if (!read_yn "Create it?") {
+ exit 0;
+ }
+ }
+}
+
+if (! -f $ktest_config) {
+ $newconfig = 1;
+ get_test_case;
+ open(OUT, ">$ktest_config") or die "Can not create $ktest_config";
+ print OUT << "EOF"
+# Generated by ktest.pl
+#
+
+# PWD is a ktest.pl variable that will result in the process working
+# directory that ktest.pl is executed in.
+
+# THIS_DIR is automatically assigned the PWD of the path that generated
+# the config file. It is best to use this variable when assigning other
+# directory paths within this directory. This allows you to easily
+# move the test cases to other locations or to other machines.
+#
+THIS_DIR := $variable{"PWD"}
+
+# Define each test with TEST_START
+# The config options below it will override the defaults
+TEST_START
+TEST_TYPE = $default{"TEST_TYPE"}
+
+DEFAULTS
+EOF
+;
+ close(OUT);
+}
+read_config $ktest_config;
+
+if (defined($opt{"LOG_FILE"})) {
+ $opt{"LOG_FILE"} = eval_option("LOG_FILE", $opt{"LOG_FILE"}, -1);
+}
+
+# Append any configs entered in manually to the config file.
+my @new_configs = keys %entered_configs;
+if ($#new_configs >= 0) {
+ print "\nAppending entered in configs to $ktest_config\n";
+ open(OUT, ">>$ktest_config") or die "Can not append to $ktest_config";
+ foreach my $config (@new_configs) {
+ print OUT "$config = $entered_configs{$config}\n";
+ $opt{$config} = process_variables($entered_configs{$config});
+ }
+}
+
+if ($opt{"CLEAR_LOG"} && defined($opt{"LOG_FILE"})) {
+ unlink $opt{"LOG_FILE"};
+}
+
+doprint "\n\nSTARTING AUTOMATED TESTS\n\n";
+
+for (my $i = 0, my $repeat = 1; $i <= $opt{"NUM_TESTS"}; $i += $repeat) {
+
+ if (!$i) {
+ doprint "DEFAULT OPTIONS:\n";
+ } else {
+ doprint "\nTEST $i OPTIONS";
+ if (defined($repeat_tests{$i})) {
+ $repeat = $repeat_tests{$i};
+ doprint " ITERATE $repeat";
+ }
+ doprint "\n";
+ }
+
+ foreach my $option (sort keys %opt) {
+
+ if ($option =~ /\[(\d+)\]$/) {
+ next if ($i != $1);
+ } else {
+ next if ($i);
+ }
+
+ doprint "$option = $opt{$option}\n";
+ }
+}
+
+sub option_defined {
+ my ($option) = @_;
+
+ if (defined($opt{$option}) && $opt{$option} !~ /^\s*$/) {
+ return 1;
+ }
+
+ return 0;
+}
+
+sub __set_test_option {
+ my ($name, $i) = @_;
+
+ my $option = "$name\[$i\]";
+
+ if (option_defined($option)) {
+ return $opt{$option};
+ }
+
+ foreach my $test (keys %repeat_tests) {
+ if ($i >= $test &&
+ $i < $test + $repeat_tests{$test}) {
+ $option = "$name\[$test\]";
+ if (option_defined($option)) {
+ return $opt{$option};
+ }
+ }
+ }
+
+ if (option_defined($name)) {
+ return $opt{$name};
+ }
+
+ return undef;
+}
+
+sub set_test_option {
+ my ($name, $i) = @_;
+
+ my $option = __set_test_option($name, $i);
+ return $option if (!defined($option));
+
+ return eval_option($name, $option, $i);
+}
+
+# First we need to do is the builds
+for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
+
+ # Do not reboot on failing test options
+ $no_reboot = 1;
+ $reboot_success = 0;
+
+ $have_version = 0;
+
+ $iteration = $i;
+
+ $build_time = 0;
+ $install_time = 0;
+ $reboot_time = 0;
+ $test_time = 0;
+
+ undef %force_config;
+
+ my $makecmd = set_test_option("MAKE_CMD", $i);
+
+ $outputdir = set_test_option("OUTPUT_DIR", $i);
+ $builddir = set_test_option("BUILD_DIR", $i);
+
+ chdir $builddir || die "can't change directory to $builddir";
+
+ if (!-d $outputdir) {
+ mkpath($outputdir) or
+ die "can't create $outputdir";
+ }
+
+ $make = "$makecmd O=$outputdir";
+
+ # Load all the options into their mapped variable names
+ foreach my $opt (keys %option_map) {
+ ${$option_map{$opt}} = set_test_option($opt, $i);
+ }
+
+ $start_minconfig_defined = 1;
+
+ # The first test may override the PRE_KTEST option
+ if (defined($pre_ktest) && $i == 1) {
+ doprint "\n";
+ run_command $pre_ktest;
+ }
+
+ # Any test can override the POST_KTEST option
+ # The last test takes precedence.
+ if (defined($post_ktest)) {
+ $final_post_ktest = $post_ktest;
+ }
+
+ if (!defined($start_minconfig)) {
+ $start_minconfig_defined = 0;
+ $start_minconfig = $minconfig;
+ }
+
+ if (!-d $tmpdir) {
+ mkpath($tmpdir) or
+ die "can't create $tmpdir";
+ }
+
+ $ENV{"SSH_USER"} = $ssh_user;
+ $ENV{"MACHINE"} = $machine;
+
+ $buildlog = "$tmpdir/buildlog-$machine";
+ $testlog = "$tmpdir/testlog-$machine";
+ $dmesg = "$tmpdir/dmesg-$machine";
+ $output_config = "$outputdir/.config";
+
+ if (!$buildonly) {
+ $target = "$ssh_user\@$machine";
+ if ($reboot_type eq "grub") {
+ dodie "GRUB_MENU not defined" if (!defined($grub_menu));
+ } elsif ($reboot_type eq "grub2") {
+ dodie "GRUB_MENU not defined" if (!defined($grub_menu));
+ dodie "GRUB_FILE not defined" if (!defined($grub_file));
+ } elsif ($reboot_type eq "syslinux") {
+ dodie "SYSLINUX_LABEL not defined" if (!defined($syslinux_label));
+ }
+ }
+
+ my $run_type = $build_type;
+ if ($test_type eq "patchcheck") {
+ $run_type = $patchcheck_type;
+ } elsif ($test_type eq "bisect") {
+ $run_type = $bisect_type;
+ } elsif ($test_type eq "config_bisect") {
+ $run_type = $config_bisect_type;
+ } elsif ($test_type eq "make_min_config") {
+ $run_type = "";
+ } elsif ($test_type eq "make_warnings_file") {
+ $run_type = "";
+ }
+
+ # mistake in config file?
+ if (!defined($run_type)) {
+ $run_type = "ERROR";
+ }
+
+ my $installme = "";
+ $installme = " no_install" if ($no_install);
+
+ my $name = "";
+
+ if (defined($test_name)) {
+ $name = " ($test_name)";
+ }
+
+ doprint "\n\n";
+ doprint "RUNNING TEST $i of $opt{NUM_TESTS}$name with option $test_type $run_type$installme\n\n";
+
+ if (defined($pre_test)) {
+ run_command $pre_test;
+ }
+
+ unlink $dmesg;
+ unlink $buildlog;
+ unlink $testlog;
+
+ if (defined($addconfig)) {
+ my $min = $minconfig;
+ if (!defined($minconfig)) {
+ $min = "";
+ }
+ run_command "cat $addconfig $min > $tmpdir/add_config" or
+ dodie "Failed to create temp config";
+ $minconfig = "$tmpdir/add_config";
+ }
+
+ if (defined($checkout)) {
+ run_command "git checkout $checkout" or
+ die "failed to checkout $checkout";
+ }
+
+ $no_reboot = 0;
+
+ # A test may opt to not reboot the box
+ if ($reboot_on_success) {
+ $reboot_success = 1;
+ }
+
+ if ($test_type eq "bisect") {
+ bisect $i;
+ next;
+ } elsif ($test_type eq "config_bisect") {
+ config_bisect $i;
+ next;
+ } elsif ($test_type eq "patchcheck") {
+ patchcheck $i;
+ next;
+ } elsif ($test_type eq "make_min_config") {
+ make_min_config $i;
+ next;
+ } elsif ($test_type eq "make_warnings_file") {
+ $no_reboot = 1;
+ make_warnings_file $i;
+ next;
+ }
+
+ if ($build_type ne "nobuild") {
+ build $build_type or next;
+ check_buildlog or next;
+ }
+
+ if ($test_type eq "install") {
+ get_version;
+ install;
+ success $i;
+ next;
+ }
+
+ if ($test_type ne "build") {
+ my $failed = 0;
+ start_monitor_and_install or $failed = 1;
+
+ if (!$failed && $test_type ne "boot" && defined($run_test)) {
+ do_run_test or $failed = 1;
+ }
+ end_monitor;
+ if ($failed) {
+ print_times;
+ next;
+ }
+ }
+
+ print_times;
+
+ success $i;
+}
+
+if (defined($final_post_ktest)) {
+ run_command $final_post_ktest;
+}
+
+if ($opt{"POWEROFF_ON_SUCCESS"}) {
+ halt;
+} elsif ($opt{"REBOOT_ON_SUCCESS"} && !do_not_reboot && $reboot_success) {
+ reboot_to_good;
+} elsif (defined($switch_to_good)) {
+ # still need to get to the good kernel
+ run_command $switch_to_good;
+}
+
+
+doprint "\n $successes of $opt{NUM_TESTS} tests were successful\n\n";
+
+exit 0;