diff options
Diffstat (limited to 'kernel/tools/perf/config')
| -rw-r--r-- | kernel/tools/perf/config/Makefile | 710 | ||||
| -rw-r--r-- | kernel/tools/perf/config/Makefile.arch | 18 | ||||
| -rw-r--r-- | kernel/tools/perf/config/utilities.mak | 179 |
3 files changed, 907 insertions, 0 deletions
diff --git a/kernel/tools/perf/config/Makefile b/kernel/tools/perf/config/Makefile new file mode 100644 index 000000000..59a98c643 --- /dev/null +++ b/kernel/tools/perf/config/Makefile @@ -0,0 +1,710 @@ + +ifeq ($(src-perf),) +src-perf := $(srctree)/tools/perf +endif + +ifeq ($(obj-perf),) +obj-perf := $(OUTPUT) +endif + +ifneq ($(obj-perf),) +obj-perf := $(abspath $(obj-perf))/ +endif + +$(shell echo -n > .config-detected) +detected = $(shell echo "$(1)=y" >> .config-detected) +detected_var = $(shell echo "$(1)=$($(1))" >> .config-detected) + +CFLAGS := $(EXTRA_CFLAGS) $(EXTRA_WARNINGS) + +include $(src-perf)/config/Makefile.arch + +$(call detected_var,ARCH) + +NO_PERF_REGS := 1 + +# Additional ARCH settings for x86 +ifeq ($(ARCH),x86) + $(call detected,CONFIG_X86) + ifeq (${IS_64_BIT}, 1) + CFLAGS += -DHAVE_ARCH_X86_64_SUPPORT + ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S ../../arch/x86/lib/memset_64.S + LIBUNWIND_LIBS = -lunwind -lunwind-x86_64 + $(call detected,CONFIG_X86_64) + else + LIBUNWIND_LIBS = -lunwind -lunwind-x86 + endif + NO_PERF_REGS := 0 +endif + +ifeq ($(ARCH),arm) + NO_PERF_REGS := 0 + LIBUNWIND_LIBS = -lunwind -lunwind-arm +endif + +ifeq ($(ARCH),arm64) + NO_PERF_REGS := 0 + LIBUNWIND_LIBS = -lunwind -lunwind-aarch64 +endif + +ifeq ($(NO_PERF_REGS),0) + $(call detected,CONFIG_PERF_REGS) +endif + +# So far there's only x86 and arm libdw unwind support merged in perf. +# Disable it on all other architectures in case libdw unwind +# support is detected in system. Add supported architectures +# to the check. +ifneq ($(ARCH),$(filter $(ARCH),x86 arm)) + NO_LIBDW_DWARF_UNWIND := 1 +endif + +ifeq ($(LIBUNWIND_LIBS),) + NO_LIBUNWIND := 1 +else + # + # For linking with debug library, run like: + # + # make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/ + # + ifdef LIBUNWIND_DIR + LIBUNWIND_CFLAGS = -I$(LIBUNWIND_DIR)/include + LIBUNWIND_LDFLAGS = -L$(LIBUNWIND_DIR)/lib + endif + LIBUNWIND_LDFLAGS += $(LIBUNWIND_LIBS) + + # Set per-feature check compilation flags + FEATURE_CHECK_CFLAGS-libunwind = $(LIBUNWIND_CFLAGS) + FEATURE_CHECK_LDFLAGS-libunwind = $(LIBUNWIND_LDFLAGS) + FEATURE_CHECK_CFLAGS-libunwind-debug-frame = $(LIBUNWIND_CFLAGS) + FEATURE_CHECK_LDFLAGS-libunwind-debug-frame = $(LIBUNWIND_LDFLAGS) +endif + +ifeq ($(NO_PERF_REGS),0) + CFLAGS += -DHAVE_PERF_REGS_SUPPORT +endif + +ifndef NO_LIBELF + # for linking with debug library, run like: + # make DEBUG=1 LIBDW_DIR=/opt/libdw/ + ifdef LIBDW_DIR + LIBDW_CFLAGS := -I$(LIBDW_DIR)/include + LIBDW_LDFLAGS := -L$(LIBDW_DIR)/lib + endif + FEATURE_CHECK_CFLAGS-libdw-dwarf-unwind := $(LIBDW_CFLAGS) + FEATURE_CHECK_LDFLAGS-libdw-dwarf-unwind := $(LIBDW_LDFLAGS) -ldw +endif + +ifdef LIBBABELTRACE + # for linking with debug library, run like: + # make DEBUG=1 LIBBABELTRACE_DIR=/opt/libbabeltrace/ + ifdef LIBBABELTRACE_DIR + LIBBABELTRACE_CFLAGS := -I$(LIBBABELTRACE_DIR)/include + LIBBABELTRACE_LDFLAGS := -L$(LIBBABELTRACE_DIR)/lib + endif + FEATURE_CHECK_CFLAGS-libbabeltrace := $(LIBBABELTRACE_CFLAGS) + FEATURE_CHECK_LDFLAGS-libbabeltrace := $(LIBBABELTRACE_LDFLAGS) -lbabeltrace-ctf +endif + +# include ARCH specific config +-include $(src-perf)/arch/$(ARCH)/Makefile + +include $(src-perf)/config/utilities.mak + +ifeq ($(call get-executable,$(FLEX)),) + dummy := $(error Error: $(FLEX) is missing on this system, please install it) +endif + +ifeq ($(call get-executable,$(BISON)),) + dummy := $(error Error: $(BISON) is missing on this system, please install it) +endif + +# Treat warnings as errors unless directed not to +ifneq ($(WERROR),0) + CFLAGS += -Werror +endif + +ifndef DEBUG + DEBUG := 0 +endif + +ifeq ($(DEBUG),0) + CFLAGS += -O6 +endif + +ifdef PARSER_DEBUG + PARSER_DEBUG_BISON := -t + PARSER_DEBUG_FLEX := -d + CFLAGS += -DPARSER_DEBUG + $(call detected_var,PARSER_DEBUG_BISON) + $(call detected_var,PARSER_DEBUG_FLEX) +endif + +ifndef NO_LIBPYTHON + # Try different combinations to accommodate systems that only have + # python[2][-config] in weird combinations but always preferring + # python2 and python2-config as per pep-0394. If we catch a + # python[-config] in version 3, the version check will kill it. + PYTHON2 := $(if $(call get-executable,python2),python2,python) + override PYTHON := $(call get-executable-or-default,PYTHON,$(PYTHON2)) + PYTHON2_CONFIG := \ + $(if $(call get-executable,$(PYTHON)-config),$(PYTHON)-config,python-config) + override PYTHON_CONFIG := \ + $(call get-executable-or-default,PYTHON_CONFIG,$(PYTHON2_CONFIG)) + + PYTHON_CONFIG_SQ := $(call shell-sq,$(PYTHON_CONFIG)) + + PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) --ldflags 2>/dev/null) + PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --cflags 2>/dev/null) + + FEATURE_CHECK_CFLAGS-libpython := $(PYTHON_EMBED_CCOPTS) + FEATURE_CHECK_LDFLAGS-libpython := $(PYTHON_EMBED_LDOPTS) + FEATURE_CHECK_CFLAGS-libpython-version := $(PYTHON_EMBED_CCOPTS) + FEATURE_CHECK_LDFLAGS-libpython-version := $(PYTHON_EMBED_LDOPTS) +endif + +CFLAGS += -fno-omit-frame-pointer +CFLAGS += -ggdb3 +CFLAGS += -funwind-tables +CFLAGS += -Wall +CFLAGS += -Wextra +CFLAGS += -std=gnu99 + +# Enforce a non-executable stack, as we may regress (again) in the future by +# adding assembler files missing the .GNU-stack linker note. +LDFLAGS += -Wl,-z,noexecstack + +EXTLIBS = -lpthread -lrt -lm -ldl + +include $(srctree)/tools/build/Makefile.feature + +ifeq ($(feature-stackprotector-all), 1) + CFLAGS += -fstack-protector-all +endif + +ifeq ($(DEBUG),0) + ifeq ($(feature-fortify-source), 1) + CFLAGS += -D_FORTIFY_SOURCE=2 + endif +endif + +CFLAGS += -I$(src-perf)/util/include +CFLAGS += -I$(src-perf)/arch/$(ARCH)/include +CFLAGS += -I$(srctree)/tools/include/ +CFLAGS += -I$(srctree)/arch/$(ARCH)/include/uapi +CFLAGS += -I$(srctree)/arch/$(ARCH)/include +CFLAGS += -I$(srctree)/include/uapi +CFLAGS += -I$(srctree)/include + +# $(obj-perf) for generated common-cmds.h +# $(obj-perf)/util for generated bison/flex headers +ifneq ($(OUTPUT),) +CFLAGS += -I$(obj-perf)/util +CFLAGS += -I$(obj-perf) +endif + +CFLAGS += -I$(src-perf)/util +CFLAGS += -I$(src-perf) +CFLAGS += -I$(srctree)/tools/lib/ + +CFLAGS += -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE + +ifeq ($(feature-sync-compare-and-swap), 1) + CFLAGS += -DHAVE_SYNC_COMPARE_AND_SWAP_SUPPORT +endif + +ifeq ($(feature-pthread-attr-setaffinity-np), 1) + CFLAGS += -DHAVE_PTHREAD_ATTR_SETAFFINITY_NP +endif + +ifndef NO_BIONIC + $(call feature_check,bionic) + ifeq ($(feature-bionic), 1) + BIONIC := 1 + EXTLIBS := $(filter-out -lrt,$(EXTLIBS)) + EXTLIBS := $(filter-out -lpthread,$(EXTLIBS)) + endif +endif + +ifdef NO_LIBELF + NO_DWARF := 1 + NO_DEMANGLE := 1 + NO_LIBUNWIND := 1 + NO_LIBDW_DWARF_UNWIND := 1 +else + ifeq ($(feature-libelf), 0) + ifeq ($(feature-glibc), 1) + LIBC_SUPPORT := 1 + endif + ifeq ($(BIONIC),1) + LIBC_SUPPORT := 1 + endif + ifeq ($(LIBC_SUPPORT),1) + msg := $(warning No libelf found, disables 'probe' tool, please install elfutils-libelf-devel/libelf-dev); + + NO_LIBELF := 1 + NO_DWARF := 1 + NO_DEMANGLE := 1 + NO_LIBUNWIND := 1 + NO_LIBDW_DWARF_UNWIND := 1 + else + ifneq ($(filter s% -static%,$(LDFLAGS),),) + msg := $(error No static glibc found, please install glibc-static); + else + msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]); + endif + endif + else + ifndef NO_LIBDW_DWARF_UNWIND + ifneq ($(feature-libdw-dwarf-unwind),1) + NO_LIBDW_DWARF_UNWIND := 1 + msg := $(warning No libdw DWARF unwind found, Please install elfutils-devel/libdw-dev >= 0.158 and/or set LIBDW_DIR); + endif + endif + ifneq ($(feature-dwarf), 1) + msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev); + NO_DWARF := 1 + endif # Dwarf support + endif # libelf support +endif # NO_LIBELF + +ifndef NO_LIBELF + CFLAGS += -DHAVE_LIBELF_SUPPORT + EXTLIBS += -lelf + $(call detected,CONFIG_LIBELF) + + ifeq ($(feature-libelf-mmap), 1) + CFLAGS += -DHAVE_LIBELF_MMAP_SUPPORT + endif + + ifeq ($(feature-libelf-getphdrnum), 1) + CFLAGS += -DHAVE_ELF_GETPHDRNUM_SUPPORT + endif + + # include ARCH specific config + -include $(src-perf)/arch/$(ARCH)/Makefile + + ifndef NO_DWARF + ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined) + msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled); + NO_DWARF := 1 + else + CFLAGS += -DHAVE_DWARF_SUPPORT $(LIBDW_CFLAGS) + LDFLAGS += $(LIBDW_LDFLAGS) + EXTLIBS += -ldw + $(call detected,CONFIG_DWARF) + endif # PERF_HAVE_DWARF_REGS + endif # NO_DWARF +endif # NO_LIBELF + +ifeq ($(ARCH),powerpc) + ifndef NO_DWARF + CFLAGS += -DHAVE_SKIP_CALLCHAIN_IDX + endif +endif + +ifndef NO_LIBUNWIND + ifneq ($(feature-libunwind), 1) + msg := $(warning No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR); + NO_LIBUNWIND := 1 + endif +endif + +dwarf-post-unwind := 1 +dwarf-post-unwind-text := BUG + +# setup DWARF post unwinder +ifdef NO_LIBUNWIND + ifdef NO_LIBDW_DWARF_UNWIND + msg := $(warning Disabling post unwind, no support found.); + dwarf-post-unwind := 0 + else + dwarf-post-unwind-text := libdw + $(call detected,CONFIG_LIBDW_DWARF_UNWIND) + endif +else + dwarf-post-unwind-text := libunwind + $(call detected,CONFIG_LIBUNWIND) + # Enable libunwind support by default. + ifndef NO_LIBDW_DWARF_UNWIND + NO_LIBDW_DWARF_UNWIND := 1 + endif +endif + +ifeq ($(dwarf-post-unwind),1) + CFLAGS += -DHAVE_DWARF_UNWIND_SUPPORT + $(call detected,CONFIG_DWARF_UNWIND) +else + NO_DWARF_UNWIND := 1 +endif + +ifndef NO_LIBUNWIND + ifeq ($(ARCH),$(filter $(ARCH),arm arm64)) + $(call feature_check,libunwind-debug-frame) + ifneq ($(feature-libunwind-debug-frame), 1) + msg := $(warning No debug_frame support found in libunwind); + CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME + endif + else + # non-ARM has no dwarf_find_debug_frame() function: + CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME + endif + CFLAGS += -DHAVE_LIBUNWIND_SUPPORT + EXTLIBS += $(LIBUNWIND_LIBS) + CFLAGS += $(LIBUNWIND_CFLAGS) + LDFLAGS += $(LIBUNWIND_LDFLAGS) +endif + +ifndef NO_LIBAUDIT + ifneq ($(feature-libaudit), 1) + msg := $(warning No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev); + NO_LIBAUDIT := 1 + else + CFLAGS += -DHAVE_LIBAUDIT_SUPPORT + EXTLIBS += -laudit + $(call detected,CONFIG_AUDIT) + endif +endif + +ifdef NO_NEWT + NO_SLANG=1 +endif + +ifndef NO_SLANG + ifneq ($(feature-libslang), 1) + msg := $(warning slang not found, disables TUI support. Please install slang-devel or libslang-dev); + NO_SLANG := 1 + else + # Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h + CFLAGS += -I/usr/include/slang + CFLAGS += -DHAVE_SLANG_SUPPORT + EXTLIBS += -lslang + $(call detected,CONFIG_SLANG) + endif +endif + +ifndef NO_GTK2 + FLAGS_GTK2=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null) + ifneq ($(feature-gtk2), 1) + msg := $(warning GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev); + NO_GTK2 := 1 + else + ifeq ($(feature-gtk2-infobar), 1) + GTK_CFLAGS := -DHAVE_GTK_INFO_BAR_SUPPORT + endif + CFLAGS += -DHAVE_GTK2_SUPPORT + GTK_CFLAGS += $(shell $(PKG_CONFIG) --cflags gtk+-2.0 2>/dev/null) + GTK_LIBS := $(shell $(PKG_CONFIG) --libs gtk+-2.0 2>/dev/null) + EXTLIBS += -ldl + endif +endif + +grep-libs = $(filter -l%,$(1)) +strip-libs = $(filter-out -l%,$(1)) + +ifdef NO_LIBPERL + CFLAGS += -DNO_LIBPERL +else + PERL_EMBED_LDOPTS = $(shell perl -MExtUtils::Embed -e ldopts 2>/dev/null) + PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS)) + PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS)) + PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null` + FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS) + + ifneq ($(feature-libperl), 1) + CFLAGS += -DNO_LIBPERL + NO_LIBPERL := 1 + msg := $(warning Missing perl devel files. Disabling perl scripting support, please install perl-ExtUtils-Embed/libperl-dev); + else + LDFLAGS += $(PERL_EMBED_LDFLAGS) + EXTLIBS += $(PERL_EMBED_LIBADD) + $(call detected,CONFIG_LIBPERL) + endif +endif + +ifeq ($(feature-timerfd), 1) + CFLAGS += -DHAVE_TIMERFD_SUPPORT +else + msg := $(warning No timerfd support. Disables 'perf kvm stat live'); +endif + +disable-python = $(eval $(disable-python_code)) +define disable-python_code + CFLAGS += -DNO_LIBPYTHON + $(warning $1) + NO_LIBPYTHON := 1 +endef + +ifdef NO_LIBPYTHON + $(call disable-python,Python support disabled by user) +else + + ifndef PYTHON + $(call disable-python,No python interpreter was found: disables Python support - please install python-devel/python-dev) + else + PYTHON_WORD := $(call shell-wordify,$(PYTHON)) + + ifndef PYTHON_CONFIG + $(call disable-python,No 'python-config' tool was found: disables Python support - please install python-devel/python-dev) + else + + PYTHON_CONFIG_SQ := $(call shell-sq,$(PYTHON_CONFIG)) + + PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) --ldflags 2>/dev/null) + PYTHON_EMBED_LDFLAGS := $(call strip-libs,$(PYTHON_EMBED_LDOPTS)) + PYTHON_EMBED_LIBADD := $(call grep-libs,$(PYTHON_EMBED_LDOPTS)) + PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --cflags 2>/dev/null) + FLAGS_PYTHON_EMBED := $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS) + + ifneq ($(feature-libpython), 1) + $(call disable-python,No 'Python.h' (for Python 2.x support) was found: disables Python support - please install python-devel/python-dev) + else + + ifneq ($(feature-libpython-version), 1) + $(warning Python 3 is not yet supported; please set) + $(warning PYTHON and/or PYTHON_CONFIG appropriately.) + $(warning If you also have Python 2 installed, then) + $(warning try something like:) + $(warning $(and ,)) + $(warning $(and ,) make PYTHON=python2) + $(warning $(and ,)) + $(warning Otherwise, disable Python support entirely:) + $(warning $(and ,)) + $(warning $(and ,) make NO_LIBPYTHON=1) + $(warning $(and ,)) + $(error $(and ,)) + else + LDFLAGS += $(PYTHON_EMBED_LDFLAGS) + EXTLIBS += $(PYTHON_EMBED_LIBADD) + LANG_BINDINGS += $(obj-perf)python/perf.so + $(call detected,CONFIG_LIBPYTHON) + endif + endif + endif + endif +endif + +ifeq ($(feature-libbfd), 1) + EXTLIBS += -lbfd + + # call all detections now so we get correct + # status in VF output + $(call feature_check,liberty) + $(call feature_check,liberty-z) + $(call feature_check,cplus-demangle) + + ifeq ($(feature-liberty), 1) + EXTLIBS += -liberty + else + ifeq ($(feature-liberty-z), 1) + EXTLIBS += -liberty -lz + endif + endif +endif + +ifdef NO_DEMANGLE + CFLAGS += -DNO_DEMANGLE +else + ifdef HAVE_CPLUS_DEMANGLE_SUPPORT + EXTLIBS += -liberty + CFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT + else + ifneq ($(feature-libbfd), 1) + ifneq ($(feature-liberty), 1) + ifneq ($(feature-liberty-z), 1) + # we dont have neither HAVE_CPLUS_DEMANGLE_SUPPORT + # or any of 'bfd iberty z' trinity + ifeq ($(feature-cplus-demangle), 1) + EXTLIBS += -liberty + CFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT + else + msg := $(warning No bfd.h/libbfd found, please install binutils-dev[el]/zlib-static/libiberty-dev to gain symbol demangling) + CFLAGS += -DNO_DEMANGLE + endif + endif + endif + endif + endif +endif + +ifneq ($(filter -lbfd,$(EXTLIBS)),) + CFLAGS += -DHAVE_LIBBFD_SUPPORT +endif + +ifndef NO_ZLIB + ifeq ($(feature-zlib), 1) + CFLAGS += -DHAVE_ZLIB_SUPPORT + EXTLIBS += -lz + $(call detected,CONFIG_ZLIB) + else + NO_ZLIB := 1 + endif +endif + +ifndef NO_LZMA + ifeq ($(feature-lzma), 1) + CFLAGS += -DHAVE_LZMA_SUPPORT + EXTLIBS += -llzma + $(call detected,CONFIG_LZMA) + else + msg := $(warning No liblzma found, disables xz kernel module decompression, please install xz-devel/liblzma-dev); + NO_LZMA := 1 + endif +endif + +ifndef NO_BACKTRACE + ifeq ($(feature-backtrace), 1) + CFLAGS += -DHAVE_BACKTRACE_SUPPORT + endif +endif + +ifndef NO_LIBNUMA + ifeq ($(feature-libnuma), 0) + msg := $(warning No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev); + NO_LIBNUMA := 1 + else + CFLAGS += -DHAVE_LIBNUMA_SUPPORT + EXTLIBS += -lnuma + $(call detected,CONFIG_NUMA) + endif +endif + +ifdef HAVE_KVM_STAT_SUPPORT + CFLAGS += -DHAVE_KVM_STAT_SUPPORT +endif + +ifeq (${IS_64_BIT}, 1) + ifndef NO_PERF_READ_VDSO32 + $(call feature_check,compile-32) + ifeq ($(feature-compile-32), 1) + CFLAGS += -DHAVE_PERF_READ_VDSO32 + else + NO_PERF_READ_VDSO32 := 1 + endif + endif + ifneq ($(ARCH), x86) + NO_PERF_READ_VDSOX32 := 1 + endif + ifndef NO_PERF_READ_VDSOX32 + $(call feature_check,compile-x32) + ifeq ($(feature-compile-x32), 1) + CFLAGS += -DHAVE_PERF_READ_VDSOX32 + else + NO_PERF_READ_VDSOX32 := 1 + endif + endif +else + NO_PERF_READ_VDSO32 := 1 + NO_PERF_READ_VDSOX32 := 1 +endif + +ifdef LIBBABELTRACE + $(call feature_check,libbabeltrace) + ifeq ($(feature-libbabeltrace), 1) + CFLAGS += -DHAVE_LIBBABELTRACE_SUPPORT $(LIBBABELTRACE_CFLAGS) + LDFLAGS += $(LIBBABELTRACE_LDFLAGS) + EXTLIBS += -lbabeltrace-ctf + $(call detected,CONFIG_LIBBABELTRACE) + else + msg := $(warning No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev); + endif +endif + +# Among the variables below, these: +# perfexecdir +# template_dir +# mandir +# infodir +# htmldir +# ETC_PERFCONFIG (but not sysconfdir) +# can be specified as a relative path some/where/else; +# this is interpreted as relative to $(prefix) and "perf" at +# runtime figures out where they are based on the path to the executable. +# This can help installing the suite in a relocatable way. + +# Make the path relative to DESTDIR, not to prefix +ifndef DESTDIR +prefix ?= $(HOME) +endif +bindir_relative = bin +bindir = $(prefix)/$(bindir_relative) +mandir = share/man +infodir = share/info +perfexecdir = libexec/perf-core +sharedir = $(prefix)/share +template_dir = share/perf-core/templates +htmldir = share/doc/perf-doc +ifeq ($(prefix),/usr) +sysconfdir = /etc +ETC_PERFCONFIG = $(sysconfdir)/perfconfig +else +sysconfdir = $(prefix)/etc +ETC_PERFCONFIG = etc/perfconfig +endif +ifndef lib +ifeq ($(ARCH)$(IS_64_BIT), x861) +lib = lib64 +else +lib = lib +endif +endif # lib +libdir = $(prefix)/$(lib) + +# Shell quote (do not use $(call) to accommodate ancient setups); +ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG)) +DESTDIR_SQ = $(subst ','\'',$(DESTDIR)) +bindir_SQ = $(subst ','\'',$(bindir)) +mandir_SQ = $(subst ','\'',$(mandir)) +infodir_SQ = $(subst ','\'',$(infodir)) +perfexecdir_SQ = $(subst ','\'',$(perfexecdir)) +template_dir_SQ = $(subst ','\'',$(template_dir)) +htmldir_SQ = $(subst ','\'',$(htmldir)) +prefix_SQ = $(subst ','\'',$(prefix)) +sysconfdir_SQ = $(subst ','\'',$(sysconfdir)) +libdir_SQ = $(subst ','\'',$(libdir)) + +ifneq ($(filter /%,$(firstword $(perfexecdir))),) +perfexec_instdir = $(perfexecdir) +else +perfexec_instdir = $(prefix)/$(perfexecdir) +endif +perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir)) + +# If we install to $(HOME) we keep the traceevent default: +# $(HOME)/.traceevent/plugins +# Otherwise we install plugins into the global $(libdir). +ifdef DESTDIR +plugindir=$(libdir)/traceevent/plugins +plugindir_SQ= $(subst ','\'',$(plugindir)) +endif + +print_var = $(eval $(print_var_code)) $(info $(MSG)) +define print_var_code + MSG = $(shell printf '...%30s: %s' $(1) $($(1))) +endef + +ifeq ($(VF),1) + $(call print_var,prefix) + $(call print_var,bindir) + $(call print_var,libdir) + $(call print_var,sysconfdir) + $(call print_var,LIBUNWIND_DIR) + $(call print_var,LIBDW_DIR) + $(info ) +endif + +$(call detected_var,bindir_SQ) +$(call detected_var,PYTHON_WORD) +ifneq ($(OUTPUT),) +$(call detected_var,OUTPUT) +endif +$(call detected_var,htmldir_SQ) +$(call detected_var,infodir_SQ) +$(call detected_var,mandir_SQ) +$(call detected_var,ETC_PERFCONFIG_SQ) +$(call detected_var,prefix_SQ) +$(call detected_var,perfexecdir_SQ) +$(call detected_var,LIBDIR) +$(call detected_var,GTK_CFLAGS) +$(call detected_var,PERL_EMBED_CCOPTS) +$(call detected_var,PYTHON_EMBED_CCOPTS) diff --git a/kernel/tools/perf/config/Makefile.arch b/kernel/tools/perf/config/Makefile.arch new file mode 100644 index 000000000..e11fbd6fa --- /dev/null +++ b/kernel/tools/perf/config/Makefile.arch @@ -0,0 +1,18 @@ +ifndef ARCH +ARCH := $(shell uname -m 2>/dev/null || echo not) +endif + +ARCH := $(shell echo $(ARCH) | sed -e s/i.86/x86/ -e s/x86_64/x86/ \ + -e s/sun4u/sparc/ -e s/sparc64/sparc/ \ + -e /arm64/!s/arm.*/arm/ -e s/sa110/arm/ \ + -e s/s390x/s390/ -e s/parisc64/parisc/ \ + -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \ + -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ \ + -e s/tile.*/tile/ ) + +LP64 := $(shell echo __LP64__ | ${CC} ${CFLAGS} -E -x c - | tail -n 1) +ifeq ($(LP64), 1) + IS_64_BIT := 1 +else + IS_64_BIT := 0 +endif diff --git a/kernel/tools/perf/config/utilities.mak b/kernel/tools/perf/config/utilities.mak new file mode 100644 index 000000000..c16ce8330 --- /dev/null +++ b/kernel/tools/perf/config/utilities.mak @@ -0,0 +1,179 @@ +# This allows us to work with the newline character: +define newline + + +endef +newline := $(newline) + +# nl-escape +# +# Usage: escape = $(call nl-escape[,escape]) +# +# This is used as the common way to specify +# what should replace a newline when escaping +# newlines; the default is a bizarre string. +# +nl-escape = $(if $(1),$(1),m822df3020w6a44id34bt574ctac44eb9f4n) + +# escape-nl +# +# Usage: escaped-text = $(call escape-nl,text[,escape]) +# +# GNU make's $(shell ...) function converts to a +# single space each newline character in the output +# produced during the expansion; this may not be +# desirable. +# +# The only solution is to change each newline into +# something that won't be converted, so that the +# information can be recovered later with +# $(call unescape-nl...) +# +escape-nl = $(subst $(newline),$(call nl-escape,$(2)),$(1)) + +# unescape-nl +# +# Usage: text = $(call unescape-nl,escaped-text[,escape]) +# +# See escape-nl. +# +unescape-nl = $(subst $(call nl-escape,$(2)),$(newline),$(1)) + +# shell-escape-nl +# +# Usage: $(shell some-command | $(call shell-escape-nl[,escape])) +# +# Use this to escape newlines from within a shell call; +# the default escape is a bizarre string. +# +# NOTE: The escape is used directly as a string constant +# in an `awk' program that is delimited by shell +# single-quotes, so be wary of the characters +# that are chosen. +# +define shell-escape-nl +awk 'NR==1 {t=$$0} NR>1 {t=t "$(nl-escape)" $$0} END {printf t}' +endef + +# shell-unescape-nl +# +# Usage: $(shell some-command | $(call shell-unescape-nl[,escape])) +# +# Use this to unescape newlines from within a shell call; +# the default escape is a bizarre string. +# +# NOTE: The escape is used directly as an extended regular +# expression constant in an `awk' program that is +# delimited by shell single-quotes, so be wary +# of the characters that are chosen. +# +# (The bash shell has a bug where `{gsub(...),...}' is +# misinterpreted as a brace expansion; this can be +# overcome by putting a space between `{' and `gsub'). +# +define shell-unescape-nl +awk 'NR==1 {t=$$0} NR>1 {t=t "\n" $$0} END { gsub(/$(nl-escape)/,"\n",t); printf t }' +endef + +# escape-for-shell-sq +# +# Usage: embeddable-text = $(call escape-for-shell-sq,text) +# +# This function produces text that is suitable for +# embedding in a shell string that is delimited by +# single-quotes. +# +escape-for-shell-sq = $(subst ','\'',$(1)) + +# shell-sq +# +# Usage: single-quoted-and-escaped-text = $(call shell-sq,text) +# +shell-sq = '$(escape-for-shell-sq)' + +# shell-wordify +# +# Usage: wordified-text = $(call shell-wordify,text) +# +# For instance: +# +# |define text +# |hello +# |world +# |endef +# | +# |target: +# | echo $(call shell-wordify,$(text)) +# +# At least GNU make gets confused by expanding a newline +# within the context of a command line of a makefile rule +# (this is in constrast to a `$(shell ...)' function call, +# which can handle it just fine). +# +# This function avoids the problem by producing a string +# that works as a shell word, regardless of whether or +# not it contains a newline. +# +# If the text to be wordified contains a newline, then +# an intrictate shell command substitution is constructed +# to render the text as a single line; when the shell +# processes the resulting escaped text, it transforms +# it into the original unescaped text. +# +# If the text does not contain a newline, then this function +# produces the same results as the `$(shell-sq)' function. +# +shell-wordify = $(if $(findstring $(newline),$(1)),$(_sw-esc-nl),$(shell-sq)) +define _sw-esc-nl +"$$(echo $(call escape-nl,$(shell-sq),$(2)) | $(call shell-unescape-nl,$(2)))" +endef + +# is-absolute +# +# Usage: bool-value = $(call is-absolute,path) +# +is-absolute = $(shell echo $(shell-sq) | grep -q ^/ && echo y) + +# lookup +# +# Usage: absolute-executable-path-or-empty = $(call lookup,path) +# +# (It's necessary to use `sh -c' because GNU make messes up by +# trying too hard and getting things wrong). +# +lookup = $(call unescape-nl,$(shell sh -c $(_l-sh))) +_l-sh = $(call shell-sq,command -v $(shell-sq) | $(call shell-escape-nl,)) + +# is-executable +# +# Usage: bool-value = $(call is-executable,path) +# +# (It's necessary to use `sh -c' because GNU make messes up by +# trying too hard and getting things wrong). +# +is-executable = $(call _is-executable-helper,$(shell-sq)) +_is-executable-helper = $(shell sh -c $(_is-executable-sh)) +_is-executable-sh = $(call shell-sq,test -f $(1) -a -x $(1) && echo y) + +# get-executable +# +# Usage: absolute-executable-path-or-empty = $(call get-executable,path) +# +# The goal is to get an absolute path for an executable; +# the `command -v' is defined by POSIX, but it's not +# necessarily very portable, so it's only used if +# relative path resolution is requested, as determined +# by the presence of a leading `/'. +# +get-executable = $(if $(1),$(if $(is-absolute),$(_ge-abspath),$(lookup))) +_ge-abspath = $(if $(is-executable),$(1)) + +# get-supplied-or-default-executable +# +# Usage: absolute-executable-path-or-empty = $(call get-executable-or-default,variable,default) +# +define get-executable-or-default +$(if $($(1)),$(call _ge_attempt,$($(1)),$(1)),$(call _ge_attempt,$(2))) +endef +_ge_attempt = $(if $(get-executable),$(get-executable),$(call _gea_err,$(2))) +_gea_err = $(if $(1),$(error Please set '$(1)' appropriately)) |