diff options
Diffstat (limited to 'kernel/sound/soc/blackfin/Kconfig')
| -rw-r--r-- | kernel/sound/soc/blackfin/Kconfig | 205 |
1 files changed, 205 insertions, 0 deletions
diff --git a/kernel/sound/soc/blackfin/Kconfig b/kernel/sound/soc/blackfin/Kconfig new file mode 100644 index 000000000..6410aa2cc --- /dev/null +++ b/kernel/sound/soc/blackfin/Kconfig @@ -0,0 +1,205 @@ +config SND_BF5XX_I2S + tristate "SoC I2S Audio for the ADI Blackfin chip" + depends on BLACKFIN + select SND_BF5XX_SOC_SPORT if !BF60x + select SND_BF6XX_SOC_SPORT if BF60x + help + Say Y or M if you want to add support for codecs attached to + the Blackfin SPORT (synchronous serial ports) interface in I2S + mode (supports single stereo In/Out). + You will also need to select the audio interfaces to support below. + +config SND_BF5XX_SOC_SSM2602 + tristate "SoC SSM2602 Audio Codec Add-On Card support" + depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI + select SND_BF5XX_SOC_I2S if !BF60x + select SND_BF6XX_SOC_I2S if BF60x + select SND_SOC_SSM2602_SPI if SPI_MASTER + select SND_SOC_SSM2602_I2C if I2C + help + Say Y if you want to add support for the Analog Devices + SSM2602 Audio Codec Add-On Card. + +config SND_SOC_BFIN_EVAL_ADAU1701 + tristate "Support for the EVAL-ADAU1701MINIZ board on Blackfin eval boards" + depends on SND_BF5XX_I2S && I2C + select SND_BF5XX_SOC_I2S + select SND_SOC_ADAU1701 + help + Say Y if you want to add support for the Analog Devices EVAL-ADAU1701MINIZ + board connected to one of the Blackfin evaluation boards like the + BF5XX-STAMP or BF5XX-EZKIT. + +config SND_SOC_BFIN_EVAL_ADAU1373 + tristate "Support for the EVAL-ADAU1373 board on Blackfin eval boards" + depends on SND_BF5XX_I2S && I2C + select SND_BF5XX_SOC_I2S + select SND_SOC_ADAU1373 + help + Say Y if you want to add support for the Analog Devices EVAL-ADAU1373 + board connected to one of the Blackfin evaluation boards like the + BF5XX-STAMP or BF5XX-EZKIT. + + Note: This driver assumes that first ADAU1373 DAI is connected to the + first SPORT port on the BF5XX board. + +config SND_SOC_BFIN_EVAL_ADAU1X61 + tristate "Support for the EVAL-ADAU1X61 board on Blackfin eval boards" + depends on SND_BF5XX_I2S && I2C + select SND_BF5XX_SOC_I2S + select SND_SOC_ADAU1761_I2C + help + Say Y if you want to add support for the Analog Devices EVAL-ADAU1X61 + board connected to one of the Blackfin evaluation boards like the + BF5XX-STAMP or BF5XX-EZKIT. + + Note: This driver assumes that the ADAU1X61 is connected to the + first SPORT port on the BF5XX board. + +config SND_SOC_BFIN_EVAL_ADAU1X81 + tristate "Support for the EVAL-ADAU1X81 boards on Blackfin eval boards" + depends on SND_BF5XX_I2S && I2C + select SND_BF5XX_SOC_I2S + select SND_SOC_ADAU1781_I2C + help + Say Y if you want to add support for the Analog Devices EVAL-ADAU1X81 + board connected to one of the Blackfin evaluation boards like the + BF5XX-STAMP or BF5XX-EZKIT. + + Note: This driver assumes that the ADAU1X81 is connected to the + first SPORT port on the BF5XX board. + +config SND_SOC_BFIN_EVAL_ADAV80X + tristate "Support for the EVAL-ADAV80X boards on Blackfin eval boards" + depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI + select SND_BF5XX_SOC_I2S + select SND_SOC_ADAV801 if SPI_MASTER + select SND_SOC_ADAV803 if I2C + help + Say Y if you want to add support for the Analog Devices EVAL-ADAV801 or + EVAL-ADAV803 board connected to one of the Blackfin evaluation boards + like the BF5XX-STAMP or BF5XX-EZKIT. + + Note: This driver assumes that the ADAV80X digital record and playback + interfaces are connected to the first SPORT port on the BF5XX board. + +config SND_BF5XX_SOC_AD1836 + tristate "SoC AD1836 Audio support for BF5xx" + depends on SND_BF5XX_I2S && SPI_MASTER + select SND_BF5XX_SOC_I2S + select SND_SOC_AD1836 + help + Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT. + +config SND_BF5XX_SOC_AD193X + tristate "SoC AD193X Audio support for Blackfin" + depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI + select SND_BF5XX_SOC_I2S + select SND_SOC_AD193X_I2C if I2C + select SND_SOC_AD193X_SPI if SPI_MASTER + help + Say Y if you want to add support for AD193X codec on Blackfin. + This driver supports AD1936, AD1937, AD1938 and AD1939. + +config SND_BF5XX_SOC_AD73311 + tristate "SoC AD73311 Audio support for Blackfin" + depends on SND_BF5XX_I2S + select SND_BF5XX_SOC_I2S + select SND_SOC_AD73311 + help + Say Y if you want to add support for AD73311 codec on Blackfin. + +config SND_BFIN_AD73311_SE + int "PF pin for AD73311L Chip Select" + depends on SND_BF5XX_SOC_AD73311 + default 4 + help + Enter the GPIO used to control AD73311's SE pin. Acceptable + values are 0 to 7 + +config SND_BF5XX_AC97 + tristate "SoC AC97 Audio for the ADI BF5xx chip" + depends on BLACKFIN + select AC97_BUS + select SND_SOC_AC97_BUS + select SND_BF5XX_SOC_SPORT + select SND_BF5XX_SOC_AC97 + help + Say Y or M if you want to add support for codecs attached to + the Blackfin SPORT (synchronous serial ports) interface in slot 16 + mode (pseudo AC97 interface). + You will also need to select the audio interfaces to support below. + + Note: + AC97 codecs which do not implement the slot-16 mode will not function + properly with this driver. This driver is known to work with the + Analog Devices line of AC97 codecs. + +config SND_BF5XX_MMAP_SUPPORT + bool "Enable MMAP Support" + depends on SND_BF5XX_AC97 + default y + help + Say y if you want AC97 driver to support mmap mode. + We introduce an intermediate buffer to simulate mmap. + +config SND_BF5XX_MULTICHAN_SUPPORT + bool "Enable Multichannel Support" + depends on SND_BF5XX_AC97 + default n + help + Say y if you want AC97 driver to support up to 5.1 channel audio. + this mode will consume much more memory for DMA. + +config SND_BF5XX_HAVE_COLD_RESET + bool "BOARD has COLD Reset GPIO" + depends on SND_BF5XX_AC97 + default y if BFIN548_EZKIT + default n if !BFIN548_EZKIT + +config SND_BF5XX_RESET_GPIO_NUM + int "Set a GPIO for cold reset" + depends on SND_BF5XX_HAVE_COLD_RESET + range 0 159 + default 19 if BFIN548_EZKIT + default 5 if BFIN537_STAMP + default 0 + help + Set the correct GPIO for RESET the sound chip. + +config SND_BF5XX_SOC_AD1980 + tristate "SoC AD1980/1 Audio support for BF5xx (Obsolete)" + depends on SND_BF5XX_AC97 + select SND_BF5XX_SOC_AC97 + select SND_SOC_AD1980 + help + Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT. + + Warning: + Because Analog Devices Inc. discontinued the ad1980 sound chip since + Sep. 2009, this ad1980 driver is not maintained, tested and supported + by ADI now. + +config SND_BF5XX_SOC_SPORT + tristate + +config SND_BF6XX_SOC_SPORT + tristate + +config SND_BF5XX_SOC_I2S + tristate + +config SND_BF6XX_SOC_I2S + tristate + +config SND_BF5XX_SOC_AC97 + tristate + +config SND_BF5XX_SPORT_NUM + int "Set a SPORT for Sound chip" + depends on (SND_BF5XX_SOC_SPORT || SND_BF6XX_SOC_SPORT) + range 0 3 if BF54x + range 0 1 if !BF54x + default 0 + help + Set the correct SPORT for sound chip. |