diff options
Diffstat (limited to 'kernel/sound/soc/atmel')
| -rw-r--r-- | kernel/sound/soc/atmel/Kconfig | 57 | ||||
| -rw-r--r-- | kernel/sound/soc/atmel/Makefile | 17 | ||||
| -rw-r--r-- | kernel/sound/soc/atmel/atmel-pcm-dma.c | 140 | ||||
| -rw-r--r-- | kernel/sound/soc/atmel/atmel-pcm-pdc.c | 416 | ||||
| -rw-r--r-- | kernel/sound/soc/atmel/atmel-pcm.h | 114 | ||||
| -rw-r--r-- | kernel/sound/soc/atmel/atmel_ssc_dai.c | 1004 | ||||
| -rw-r--r-- | kernel/sound/soc/atmel/atmel_ssc_dai.h | 124 | ||||
| -rw-r--r-- | kernel/sound/soc/atmel/atmel_wm8904.c | 195 | ||||
| -rw-r--r-- | kernel/sound/soc/atmel/sam9g20_wm8731.c | 291 | ||||
| -rw-r--r-- | kernel/sound/soc/atmel/sam9x5_wm8731.c | 207 |
10 files changed, 2565 insertions, 0 deletions
diff --git a/kernel/sound/soc/atmel/Kconfig b/kernel/sound/soc/atmel/Kconfig new file mode 100644 index 000000000..e7d08806f --- /dev/null +++ b/kernel/sound/soc/atmel/Kconfig @@ -0,0 +1,57 @@ +config SND_ATMEL_SOC + tristate "SoC Audio for the Atmel System-on-Chip" + depends on HAS_IOMEM + help + Say Y or M if you want to add support for codecs attached to + the ATMEL SSC interface. You will also need + to select the audio interfaces to support below. + +config SND_ATMEL_SOC_PDC + tristate + depends on SND_ATMEL_SOC + +config SND_ATMEL_SOC_DMA + tristate + depends on SND_ATMEL_SOC + select SND_SOC_GENERIC_DMAENGINE_PCM + +config SND_ATMEL_SOC_SSC + tristate + depends on SND_ATMEL_SOC + help + Say Y or M if you want to add support for codecs the + ATMEL SSC interface. You will also needs to select the individual + machine drivers to support below. + +config SND_AT91_SOC_SAM9G20_WM8731 + tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board" + depends on ARCH_AT91 || COMPILE_TEST + depends on ATMEL_SSC && SND_ATMEL_SOC && SND_SOC_I2C_AND_SPI + select SND_ATMEL_SOC_PDC + select SND_ATMEL_SOC_SSC + select SND_SOC_WM8731 + help + Say Y if you want to add support for SoC audio on WM8731-based + AT91sam9g20 evaluation board. + +config SND_ATMEL_SOC_WM8904 + tristate "Atmel ASoC driver for boards using WM8904 codec" + depends on ARCH_AT91 || COMPILE_TEST + depends on ATMEL_SSC && SND_ATMEL_SOC && I2C + select SND_ATMEL_SOC_SSC + select SND_ATMEL_SOC_DMA + select SND_SOC_WM8904 + help + Say Y if you want to add support for Atmel ASoC driver for boards using + WM8904 codec. + +config SND_AT91_SOC_SAM9X5_WM8731 + tristate "SoC Audio support for WM8731-based at91sam9x5 board" + depends on ARCH_AT91 || COMPILE_TEST + depends on ATMEL_SSC && SND_ATMEL_SOC && SND_SOC_I2C_AND_SPI + select SND_ATMEL_SOC_SSC + select SND_ATMEL_SOC_DMA + select SND_SOC_WM8731 + help + Say Y if you want to add support for audio SoC on an + at91sam9x5 based board that is using WM8731 codec. diff --git a/kernel/sound/soc/atmel/Makefile b/kernel/sound/soc/atmel/Makefile new file mode 100644 index 000000000..b327e5cc8 --- /dev/null +++ b/kernel/sound/soc/atmel/Makefile @@ -0,0 +1,17 @@ +# AT91 Platform Support +snd-soc-atmel-pcm-pdc-objs := atmel-pcm-pdc.o +snd-soc-atmel-pcm-dma-objs := atmel-pcm-dma.o +snd-soc-atmel_ssc_dai-objs := atmel_ssc_dai.o + +obj-$(CONFIG_SND_ATMEL_SOC_PDC) += snd-soc-atmel-pcm-pdc.o +obj-$(CONFIG_SND_ATMEL_SOC_DMA) += snd-soc-atmel-pcm-dma.o +obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o + +# AT91 Machine Support +snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o +snd-atmel-soc-wm8904-objs := atmel_wm8904.o +snd-soc-sam9x5-wm8731-objs := sam9x5_wm8731.o + +obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o +obj-$(CONFIG_SND_ATMEL_SOC_WM8904) += snd-atmel-soc-wm8904.o +obj-$(CONFIG_SND_AT91_SOC_SAM9X5_WM8731) += snd-soc-sam9x5-wm8731.o diff --git a/kernel/sound/soc/atmel/atmel-pcm-dma.c b/kernel/sound/soc/atmel/atmel-pcm-dma.c new file mode 100644 index 000000000..b6625c8c4 --- /dev/null +++ b/kernel/sound/soc/atmel/atmel-pcm-dma.c @@ -0,0 +1,140 @@ +/* + * atmel-pcm-dma.c -- ALSA PCM DMA support for the Atmel SoC. + * + * Copyright (C) 2012 Atmel + * + * Author: Bo Shen <voice.shen@atmel.com> + * + * Based on atmel-pcm by: + * Sedji Gaouaou <sedji.gaouaou@atmel.com> + * Copyright 2008 Atmel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/atmel-ssc.h> +#include <linux/platform_data/dma-atmel.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/dmaengine_pcm.h> + +#include "atmel-pcm.h" + +/*--------------------------------------------------------------------------*\ + * Hardware definition +\*--------------------------------------------------------------------------*/ +static const struct snd_pcm_hardware atmel_pcm_dma_hardware = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_RESUME | + SNDRV_PCM_INFO_PAUSE, + .period_bytes_min = 256, /* lighting DMA overhead */ + .period_bytes_max = 2 * 0xffff, /* if 2 bytes format */ + .periods_min = 8, + .periods_max = 1024, /* no limit */ + .buffer_bytes_max = 512 * 1024, +}; + +/** + * atmel_pcm_dma_irq: SSC interrupt handler for DMAENGINE enabled SSC + * + * We use DMAENGINE to send/receive data to/from SSC so this ISR is only to + * check if any overrun occured. + */ +static void atmel_pcm_dma_irq(u32 ssc_sr, + struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct atmel_pcm_dma_params *prtd; + + prtd = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); + + if (ssc_sr & prtd->mask->ssc_error) { + if (snd_pcm_running(substream)) + pr_warn("atmel-pcm: buffer %s on %s (SSC_SR=%#x)\n", + substream->stream == SNDRV_PCM_STREAM_PLAYBACK + ? "underrun" : "overrun", prtd->name, + ssc_sr); + + /* stop RX and capture: will be enabled again at restart */ + ssc_writex(prtd->ssc->regs, SSC_CR, prtd->mask->ssc_disable); + snd_pcm_stop_xrun(substream); + + /* now drain RHR and read status to remove xrun condition */ + ssc_readx(prtd->ssc->regs, SSC_RHR); + ssc_readx(prtd->ssc->regs, SSC_SR); + } +} + +static int atmel_pcm_configure_dma(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct dma_slave_config *slave_config) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct atmel_pcm_dma_params *prtd; + struct ssc_device *ssc; + int ret; + + prtd = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); + ssc = prtd->ssc; + + ret = snd_hwparams_to_dma_slave_config(substream, params, slave_config); + if (ret) { + pr_err("atmel-pcm: hwparams to dma slave configure failed\n"); + return ret; + } + + slave_config->dst_addr = ssc->phybase + SSC_THR; + slave_config->dst_maxburst = 1; + + slave_config->src_addr = ssc->phybase + SSC_RHR; + slave_config->src_maxburst = 1; + + prtd->dma_intr_handler = atmel_pcm_dma_irq; + + return 0; +} + +static const struct snd_dmaengine_pcm_config atmel_dmaengine_pcm_config = { + .prepare_slave_config = atmel_pcm_configure_dma, + .pcm_hardware = &atmel_pcm_dma_hardware, + .prealloc_buffer_size = 64 * 1024, +}; + +int atmel_pcm_dma_platform_register(struct device *dev) +{ + return snd_dmaengine_pcm_register(dev, &atmel_dmaengine_pcm_config, + SND_DMAENGINE_PCM_FLAG_NO_RESIDUE); +} +EXPORT_SYMBOL(atmel_pcm_dma_platform_register); + +void atmel_pcm_dma_platform_unregister(struct device *dev) +{ + snd_dmaengine_pcm_unregister(dev); +} +EXPORT_SYMBOL(atmel_pcm_dma_platform_unregister); + +MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>"); +MODULE_DESCRIPTION("Atmel DMA based PCM module"); +MODULE_LICENSE("GPL"); diff --git a/kernel/sound/soc/atmel/atmel-pcm-pdc.c b/kernel/sound/soc/atmel/atmel-pcm-pdc.c new file mode 100644 index 000000000..da861b444 --- /dev/null +++ b/kernel/sound/soc/atmel/atmel-pcm-pdc.c @@ -0,0 +1,416 @@ +/* + * atmel-pcm.c -- ALSA PCM interface for the Atmel atmel SoC. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou <sedji.gaouaou@atmel.com> + * + * Based on at91-pcm. by: + * Frank Mandarino <fmandarino@endrelia.com> + * Copyright 2006 Endrelia Technologies Inc. + * + * Based on pxa2xx-pcm.c by: + * + * Author: Nicolas Pitre + * Created: Nov 30, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> +#include <linux/atmel_pdc.h> +#include <linux/atmel-ssc.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> + +#include "atmel-pcm.h" + + +static int atmel_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, + int stream) +{ + struct snd_pcm_substream *substream = pcm->streams[stream].substream; + struct snd_dma_buffer *buf = &substream->dma_buffer; + size_t size = ATMEL_SSC_DMABUF_SIZE; + + buf->dev.type = SNDRV_DMA_TYPE_DEV; + buf->dev.dev = pcm->card->dev; + buf->private_data = NULL; + buf->area = dma_alloc_coherent(pcm->card->dev, size, + &buf->addr, GFP_KERNEL); + pr_debug("atmel-pcm: alloc dma buffer: area=%p, addr=%p, size=%zu\n", + (void *)buf->area, (void *)(long)buf->addr, size); + + if (!buf->area) + return -ENOMEM; + + buf->bytes = size; + return 0; +} + +static int atmel_pcm_mmap(struct snd_pcm_substream *substream, + struct vm_area_struct *vma) +{ + return remap_pfn_range(vma, vma->vm_start, + substream->dma_buffer.addr >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot); +} + +static int atmel_pcm_new(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_card *card = rtd->card->snd_card; + struct snd_pcm *pcm = rtd->pcm; + int ret; + + ret = dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32)); + if (ret) + return ret; + + if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) { + pr_debug("atmel-pcm: allocating PCM playback DMA buffer\n"); + ret = atmel_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_PLAYBACK); + if (ret) + goto out; + } + + if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) { + pr_debug("atmel-pcm: allocating PCM capture DMA buffer\n"); + ret = atmel_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_CAPTURE); + if (ret) + goto out; + } + out: + return ret; +} + +static void atmel_pcm_free(struct snd_pcm *pcm) +{ + struct snd_pcm_substream *substream; + struct snd_dma_buffer *buf; + int stream; + + for (stream = 0; stream < 2; stream++) { + substream = pcm->streams[stream].substream; + if (!substream) + continue; + + buf = &substream->dma_buffer; + if (!buf->area) + continue; + dma_free_coherent(pcm->card->dev, buf->bytes, + buf->area, buf->addr); + buf->area = NULL; + } +} + +/*--------------------------------------------------------------------------*\ + * Hardware definition +\*--------------------------------------------------------------------------*/ +/* TODO: These values were taken from the AT91 platform driver, check + * them against real values for AT32 + */ +static const struct snd_pcm_hardware atmel_pcm_hardware = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_PAUSE, + .period_bytes_min = 32, + .period_bytes_max = 8192, + .periods_min = 2, + .periods_max = 1024, + .buffer_bytes_max = ATMEL_SSC_DMABUF_SIZE, +}; + + +/*--------------------------------------------------------------------------*\ + * Data types +\*--------------------------------------------------------------------------*/ +struct atmel_runtime_data { + struct atmel_pcm_dma_params *params; + dma_addr_t dma_buffer; /* physical address of dma buffer */ + dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */ + size_t period_size; + + dma_addr_t period_ptr; /* physical address of next period */ +}; + +/*--------------------------------------------------------------------------*\ + * ISR +\*--------------------------------------------------------------------------*/ +static void atmel_pcm_dma_irq(u32 ssc_sr, + struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + static int count; + + count++; + + if (ssc_sr & params->mask->ssc_endbuf) { + pr_warn("atmel-pcm: buffer %s on %s (SSC_SR=%#x, count=%d)\n", + substream->stream == SNDRV_PCM_STREAM_PLAYBACK + ? "underrun" : "overrun", + params->name, ssc_sr, count); + + /* re-start the PDC */ + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + prtd->period_ptr += prtd->period_size; + if (prtd->period_ptr >= prtd->dma_buffer_end) + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xcr, + prtd->period_size / params->pdc_xfer_size); + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_enable); + } + + if (ssc_sr & params->mask->ssc_endx) { + /* Load the PDC next pointer and counter registers */ + prtd->period_ptr += prtd->period_size; + if (prtd->period_ptr >= prtd->dma_buffer_end) + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xnpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xncr, + prtd->period_size / params->pdc_xfer_size); + } + + snd_pcm_period_elapsed(substream); +} + + +/*--------------------------------------------------------------------------*\ + * PCM operations +\*--------------------------------------------------------------------------*/ +static int atmel_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd = runtime->private_data; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + + /* this may get called several times by oss emulation + * with different params */ + + snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); + runtime->dma_bytes = params_buffer_bytes(params); + + prtd->params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); + prtd->params->dma_intr_handler = atmel_pcm_dma_irq; + + prtd->dma_buffer = runtime->dma_addr; + prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes; + prtd->period_size = params_period_bytes(params); + + pr_debug("atmel-pcm: " + "hw_params: DMA for %s initialized " + "(dma_bytes=%zu, period_size=%zu)\n", + prtd->params->name, + runtime->dma_bytes, + prtd->period_size); + return 0; +} + +static int atmel_pcm_hw_free(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + + if (params != NULL) { + ssc_writex(params->ssc->regs, SSC_PDC_PTCR, + params->mask->pdc_disable); + prtd->params->dma_intr_handler = NULL; + } + + return 0; +} + +static int atmel_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + + ssc_writex(params->ssc->regs, SSC_IDR, + params->mask->ssc_endx | params->mask->ssc_endbuf); + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + return 0; +} + +static int atmel_pcm_trigger(struct snd_pcm_substream *substream, + int cmd) +{ + struct snd_pcm_runtime *rtd = substream->runtime; + struct atmel_runtime_data *prtd = rtd->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + int ret = 0; + + pr_debug("atmel-pcm:buffer_size = %ld," + "dma_area = %p, dma_bytes = %zu\n", + rtd->buffer_size, rtd->dma_area, rtd->dma_bytes); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xcr, + prtd->period_size / params->pdc_xfer_size); + + prtd->period_ptr += prtd->period_size; + ssc_writex(params->ssc->regs, params->pdc->xnpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xncr, + prtd->period_size / params->pdc_xfer_size); + + pr_debug("atmel-pcm: trigger: " + "period_ptr=%lx, xpr=%u, " + "xcr=%u, xnpr=%u, xncr=%u\n", + (unsigned long)prtd->period_ptr, + ssc_readx(params->ssc->regs, params->pdc->xpr), + ssc_readx(params->ssc->regs, params->pdc->xcr), + ssc_readx(params->ssc->regs, params->pdc->xnpr), + ssc_readx(params->ssc->regs, params->pdc->xncr)); + + ssc_writex(params->ssc->regs, SSC_IER, + params->mask->ssc_endx | params->mask->ssc_endbuf); + ssc_writex(params->ssc->regs, SSC_PDC_PTCR, + params->mask->pdc_enable); + + pr_debug("sr=%u imr=%u\n", + ssc_readx(params->ssc->regs, SSC_SR), + ssc_readx(params->ssc->regs, SSC_IER)); + break; /* SNDRV_PCM_TRIGGER_START */ + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + break; + + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_enable); + break; + + default: + ret = -EINVAL; + } + + return ret; +} + +static snd_pcm_uframes_t atmel_pcm_pointer( + struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd = runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + dma_addr_t ptr; + snd_pcm_uframes_t x; + + ptr = (dma_addr_t) ssc_readx(params->ssc->regs, params->pdc->xpr); + x = bytes_to_frames(runtime, ptr - prtd->dma_buffer); + + if (x == runtime->buffer_size) + x = 0; + + return x; +} + +static int atmel_pcm_open(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd; + int ret = 0; + + snd_soc_set_runtime_hwparams(substream, &atmel_pcm_hardware); + + /* ensure that buffer size is a multiple of period size */ + ret = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (ret < 0) + goto out; + + prtd = kzalloc(sizeof(struct atmel_runtime_data), GFP_KERNEL); + if (prtd == NULL) { + ret = -ENOMEM; + goto out; + } + runtime->private_data = prtd; + + out: + return ret; +} + +static int atmel_pcm_close(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + + kfree(prtd); + return 0; +} + +static struct snd_pcm_ops atmel_pcm_ops = { + .open = atmel_pcm_open, + .close = atmel_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = atmel_pcm_hw_params, + .hw_free = atmel_pcm_hw_free, + .prepare = atmel_pcm_prepare, + .trigger = atmel_pcm_trigger, + .pointer = atmel_pcm_pointer, + .mmap = atmel_pcm_mmap, +}; + +static struct snd_soc_platform_driver atmel_soc_platform = { + .ops = &atmel_pcm_ops, + .pcm_new = atmel_pcm_new, + .pcm_free = atmel_pcm_free, +}; + +int atmel_pcm_pdc_platform_register(struct device *dev) +{ + return snd_soc_register_platform(dev, &atmel_soc_platform); +} +EXPORT_SYMBOL(atmel_pcm_pdc_platform_register); + +void atmel_pcm_pdc_platform_unregister(struct device *dev) +{ + snd_soc_unregister_platform(dev); +} +EXPORT_SYMBOL(atmel_pcm_pdc_platform_unregister); + +MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou@atmel.com>"); +MODULE_DESCRIPTION("Atmel PCM module"); +MODULE_LICENSE("GPL"); diff --git a/kernel/sound/soc/atmel/atmel-pcm.h b/kernel/sound/soc/atmel/atmel-pcm.h new file mode 100644 index 000000000..6eaf081ca --- /dev/null +++ b/kernel/sound/soc/atmel/atmel-pcm.h @@ -0,0 +1,114 @@ +/* + * at91-pcm.h - ALSA PCM interface for the Atmel AT91 SoC. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou <sedji.gaouaou@atmel.com> + * + * Based on at91-pcm. by: + * Frank Mandarino <fmandarino@endrelia.com> + * Copyright 2006 Endrelia Technologies Inc. + * + * Based on pxa2xx-pcm.c by: + * + * Author: Nicolas Pitre + * Created: Nov 30, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ATMEL_PCM_H +#define _ATMEL_PCM_H + +#include <linux/atmel-ssc.h> + +#define ATMEL_SSC_DMABUF_SIZE (64 * 1024) + +/* + * Registers and status bits that are required by the PCM driver. + */ +struct atmel_pdc_regs { + unsigned int xpr; /* PDC recv/trans pointer */ + unsigned int xcr; /* PDC recv/trans counter */ + unsigned int xnpr; /* PDC next recv/trans pointer */ + unsigned int xncr; /* PDC next recv/trans counter */ + unsigned int ptcr; /* PDC transfer control */ +}; + +struct atmel_ssc_mask { + u32 ssc_enable; /* SSC recv/trans enable */ + u32 ssc_disable; /* SSC recv/trans disable */ + u32 ssc_error; /* SSC error conditions */ + u32 ssc_endx; /* SSC ENDTX or ENDRX */ + u32 ssc_endbuf; /* SSC TXBUFE or RXBUFF */ + u32 pdc_enable; /* PDC recv/trans enable */ + u32 pdc_disable; /* PDC recv/trans disable */ +}; + +/* + * This structure, shared between the PCM driver and the interface, + * contains all information required by the PCM driver to perform the + * PDC DMA operation. All fields except dma_intr_handler() are initialized + * by the interface. The dma_intr_handler() pointer is set by the PCM + * driver and called by the interface SSC interrupt handler if it is + * non-NULL. + */ +struct atmel_pcm_dma_params { + char *name; /* stream identifier */ + int pdc_xfer_size; /* PDC counter increment in bytes */ + struct ssc_device *ssc; /* SSC device for stream */ + struct atmel_pdc_regs *pdc; /* PDC receive or transmit registers */ + struct atmel_ssc_mask *mask; /* SSC & PDC status bits */ + struct snd_pcm_substream *substream; + void (*dma_intr_handler)(u32, struct snd_pcm_substream *); +}; + +/* + * SSC register access (since ssc_writel() / ssc_readl() require literal name) + */ +#define ssc_readx(base, reg) (__raw_readl((base) + (reg))) +#define ssc_writex(base, reg, value) __raw_writel((value), (base) + (reg)) + +#if defined(CONFIG_SND_ATMEL_SOC_PDC) || \ + defined(CONFIG_SND_ATMEL_SOC_PDC_MODULE) +int atmel_pcm_pdc_platform_register(struct device *dev); +void atmel_pcm_pdc_platform_unregister(struct device *dev); +#else +static inline int atmel_pcm_pdc_platform_register(struct device *dev) +{ + return 0; +} +static inline void atmel_pcm_pdc_platform_unregister(struct device *dev) +{ +} +#endif + +#if defined(CONFIG_SND_ATMEL_SOC_DMA) || \ + defined(CONFIG_SND_ATMEL_SOC_DMA_MODULE) +int atmel_pcm_dma_platform_register(struct device *dev); +void atmel_pcm_dma_platform_unregister(struct device *dev); +#else +static inline int atmel_pcm_dma_platform_register(struct device *dev) +{ + return 0; +} +static inline void atmel_pcm_dma_platform_unregister(struct device *dev) +{ +} +#endif + +#endif /* _ATMEL_PCM_H */ diff --git a/kernel/sound/soc/atmel/atmel_ssc_dai.c b/kernel/sound/soc/atmel/atmel_ssc_dai.c new file mode 100644 index 000000000..841d05946 --- /dev/null +++ b/kernel/sound/soc/atmel/atmel_ssc_dai.c @@ -0,0 +1,1004 @@ +/* + * atmel_ssc_dai.c -- ALSA SoC ATMEL SSC Audio Layer Platform driver + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Author: Sedji Gaouaou <sedji.gaouaou@atmel.com> + * ATMEL CORP. + * + * Based on at91-ssc.c by + * Frank Mandarino <fmandarino@endrelia.com> + * Based on pxa2xx Platform drivers by + * Liam Girdwood <lrg@slimlogic.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/atmel_pdc.h> + +#include <linux/atmel-ssc.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/soc.h> + +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" + + +#define NUM_SSC_DEVICES 3 + +/* + * SSC PDC registers required by the PCM DMA engine. + */ +static struct atmel_pdc_regs pdc_tx_reg = { + .xpr = ATMEL_PDC_TPR, + .xcr = ATMEL_PDC_TCR, + .xnpr = ATMEL_PDC_TNPR, + .xncr = ATMEL_PDC_TNCR, +}; + +static struct atmel_pdc_regs pdc_rx_reg = { + .xpr = ATMEL_PDC_RPR, + .xcr = ATMEL_PDC_RCR, + .xnpr = ATMEL_PDC_RNPR, + .xncr = ATMEL_PDC_RNCR, +}; + +/* + * SSC & PDC status bits for transmit and receive. + */ +static struct atmel_ssc_mask ssc_tx_mask = { + .ssc_enable = SSC_BIT(CR_TXEN), + .ssc_disable = SSC_BIT(CR_TXDIS), + .ssc_endx = SSC_BIT(SR_ENDTX), + .ssc_endbuf = SSC_BIT(SR_TXBUFE), + .ssc_error = SSC_BIT(SR_OVRUN), + .pdc_enable = ATMEL_PDC_TXTEN, + .pdc_disable = ATMEL_PDC_TXTDIS, +}; + +static struct atmel_ssc_mask ssc_rx_mask = { + .ssc_enable = SSC_BIT(CR_RXEN), + .ssc_disable = SSC_BIT(CR_RXDIS), + .ssc_endx = SSC_BIT(SR_ENDRX), + .ssc_endbuf = SSC_BIT(SR_RXBUFF), + .ssc_error = SSC_BIT(SR_OVRUN), + .pdc_enable = ATMEL_PDC_RXTEN, + .pdc_disable = ATMEL_PDC_RXTDIS, +}; + + +/* + * DMA parameters. + */ +static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { + {{ + .name = "SSC0 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC0 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, + {{ + .name = "SSC1 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC1 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, + {{ + .name = "SSC2 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC2 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, +}; + + +static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = { + { + .name = "ssc0", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, + { + .name = "ssc1", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, + { + .name = "ssc2", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, +}; + + +/* + * SSC interrupt handler. Passes PDC interrupts to the DMA + * interrupt handler in the PCM driver. + */ +static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id) +{ + struct atmel_ssc_info *ssc_p = dev_id; + struct atmel_pcm_dma_params *dma_params; + u32 ssc_sr; + u32 ssc_substream_mask; + int i; + + ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR) + & (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR); + + /* + * Loop through the substreams attached to this SSC. If + * a DMA-related interrupt occurred on that substream, call + * the DMA interrupt handler function, if one has been + * registered in the dma_params structure by the PCM driver. + */ + for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { + dma_params = ssc_p->dma_params[i]; + + if ((dma_params != NULL) && + (dma_params->dma_intr_handler != NULL)) { + ssc_substream_mask = (dma_params->mask->ssc_endx | + dma_params->mask->ssc_endbuf); + if (ssc_sr & ssc_substream_mask) { + dma_params->dma_intr_handler(ssc_sr, + dma_params-> + substream); + } + } + } + + return IRQ_HANDLED; +} + +/* + * When the bit clock is input, limit the maximum rate according to the + * Serial Clock Ratio Considerations section from the SSC documentation: + * + * The Transmitter and the Receiver can be programmed to operate + * with the clock signals provided on either the TK or RK pins. + * This allows the SSC to support many slave-mode data transfers. + * In this case, the maximum clock speed allowed on the RK pin is: + * - Peripheral clock divided by 2 if Receiver Frame Synchro is input + * - Peripheral clock divided by 3 if Receiver Frame Synchro is output + * In addition, the maximum clock speed allowed on the TK pin is: + * - Peripheral clock divided by 6 if Transmit Frame Synchro is input + * - Peripheral clock divided by 2 if Transmit Frame Synchro is output + * + * When the bit clock is output, limit the rate according to the + * SSC divider restrictions. + */ +static int atmel_ssc_hw_rule_rate(struct snd_pcm_hw_params *params, + struct snd_pcm_hw_rule *rule) +{ + struct atmel_ssc_info *ssc_p = rule->private; + struct ssc_device *ssc = ssc_p->ssc; + struct snd_interval *i = hw_param_interval(params, rule->var); + struct snd_interval t; + struct snd_ratnum r = { + .den_min = 1, + .den_max = 4095, + .den_step = 1, + }; + unsigned int num = 0, den = 0; + int frame_size; + int mck_div = 2; + int ret; + + frame_size = snd_soc_params_to_frame_size(params); + if (frame_size < 0) + return frame_size; + + switch (ssc_p->daifmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFS: + if ((ssc_p->dir_mask & SSC_DIR_MASK_CAPTURE) + && ssc->clk_from_rk_pin) + /* Receiver Frame Synchro (i.e. capture) + * is output (format is _CFS) and the RK pin + * is used for input (format is _CBM_). + */ + mck_div = 3; + break; + + case SND_SOC_DAIFMT_CBM_CFM: + if ((ssc_p->dir_mask & SSC_DIR_MASK_PLAYBACK) + && !ssc->clk_from_rk_pin) + /* Transmit Frame Synchro (i.e. playback) + * is input (format is _CFM) and the TK pin + * is used for input (format _CBM_ but not + * using the RK pin). + */ + mck_div = 6; + break; + } + + switch (ssc_p->daifmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + r.num = ssc_p->mck_rate / mck_div / frame_size; + + ret = snd_interval_ratnum(i, 1, &r, &num, &den); + if (ret >= 0 && den && rule->var == SNDRV_PCM_HW_PARAM_RATE) { + params->rate_num = num; + params->rate_den = den; + } + break; + + case SND_SOC_DAIFMT_CBM_CFS: + case SND_SOC_DAIFMT_CBM_CFM: + t.min = 8000; + t.max = ssc_p->mck_rate / mck_div / frame_size; + t.openmin = t.openmax = 0; + t.integer = 0; + ret = snd_interval_refine(i, &t); + break; + + default: + ret = -EINVAL; + break; + } + + return ret; +} + +/*-------------------------------------------------------------------------*\ + * DAI functions +\*-------------------------------------------------------------------------*/ +/* + * Startup. Only that one substream allowed in each direction. + */ +static int atmel_ssc_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir, dir_mask; + int ret; + + pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n", + ssc_readl(ssc_p->ssc->regs, SR)); + + /* Enable PMC peripheral clock for this SSC */ + pr_debug("atmel_ssc_dai: Starting clock\n"); + clk_enable(ssc_p->ssc->clk); + ssc_p->mck_rate = clk_get_rate(ssc_p->ssc->clk); + + /* Reset the SSC to keep it at a clean status */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + dir = 0; + dir_mask = SSC_DIR_MASK_PLAYBACK; + } else { + dir = 1; + dir_mask = SSC_DIR_MASK_CAPTURE; + } + + ret = snd_pcm_hw_rule_add(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + atmel_ssc_hw_rule_rate, + ssc_p, + SNDRV_PCM_HW_PARAM_FRAME_BITS, + SNDRV_PCM_HW_PARAM_CHANNELS, -1); + if (ret < 0) { + dev_err(dai->dev, "Failed to specify rate rule: %d\n", ret); + return ret; + } + + dma_params = &ssc_dma_params[dai->id][dir]; + dma_params->ssc = ssc_p->ssc; + dma_params->substream = substream; + + ssc_p->dma_params[dir] = dma_params; + + snd_soc_dai_set_dma_data(dai, substream, dma_params); + + spin_lock_irq(&ssc_p->lock); + if (ssc_p->dir_mask & dir_mask) { + spin_unlock_irq(&ssc_p->lock); + return -EBUSY; + } + ssc_p->dir_mask |= dir_mask; + spin_unlock_irq(&ssc_p->lock); + + return 0; +} + +/* + * Shutdown. Clear DMA parameters and shutdown the SSC if there + * are no other substreams open. + */ +static void atmel_ssc_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir, dir_mask; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + if (dma_params != NULL) { + dma_params->ssc = NULL; + dma_params->substream = NULL; + ssc_p->dma_params[dir] = NULL; + } + + dir_mask = 1 << dir; + + spin_lock_irq(&ssc_p->lock); + ssc_p->dir_mask &= ~dir_mask; + if (!ssc_p->dir_mask) { + if (ssc_p->initialized) { + free_irq(ssc_p->ssc->irq, ssc_p); + ssc_p->initialized = 0; + } + + /* Reset the SSC */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + /* Clear the SSC dividers */ + ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0; + } + spin_unlock_irq(&ssc_p->lock); + + /* Shutdown the SSC clock. */ + pr_debug("atmel_ssc_dai: Stopping clock\n"); + clk_disable(ssc_p->ssc->clk); +} + + +/* + * Record the DAI format for use in hw_params(). + */ +static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + ssc_p->daifmt = fmt; + return 0; +} + +/* + * Record SSC clock dividers for use in hw_params(). + */ +static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, + int div_id, int div) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + switch (div_id) { + case ATMEL_SSC_CMR_DIV: + /* + * The same master clock divider is used for both + * transmit and receive, so if a value has already + * been set, it must match this value. + */ + if (ssc_p->dir_mask != + (SSC_DIR_MASK_PLAYBACK | SSC_DIR_MASK_CAPTURE)) + ssc_p->cmr_div = div; + else if (ssc_p->cmr_div == 0) + ssc_p->cmr_div = div; + else + if (div != ssc_p->cmr_div) + return -EBUSY; + break; + + case ATMEL_SSC_TCMR_PERIOD: + ssc_p->tcmr_period = div; + break; + + case ATMEL_SSC_RCMR_PERIOD: + ssc_p->rcmr_period = div; + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* + * Configure the SSC. + */ +static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + int id = dai->id; + struct atmel_ssc_info *ssc_p = &ssc_info[id]; + struct ssc_device *ssc = ssc_p->ssc; + struct atmel_pcm_dma_params *dma_params; + int dir, channels, bits; + u32 tfmr, rfmr, tcmr, rcmr; + int ret; + int fslen, fslen_ext; + + /* + * Currently, there is only one set of dma params for + * each direction. If more are added, this code will + * have to be changed to select the proper set. + */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + channels = params_channels(params); + + /* + * Determine sample size in bits and the PDC increment. + */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + bits = 8; + dma_params->pdc_xfer_size = 1; + break; + case SNDRV_PCM_FORMAT_S16_LE: + bits = 16; + dma_params->pdc_xfer_size = 2; + break; + case SNDRV_PCM_FORMAT_S24_LE: + bits = 24; + dma_params->pdc_xfer_size = 4; + break; + case SNDRV_PCM_FORMAT_S32_LE: + bits = 32; + dma_params->pdc_xfer_size = 4; + break; + default: + printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format"); + return -EINVAL; + } + + /* + * Compute SSC register settings. + */ + switch (ssc_p->daifmt + & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: + /* + * I2S format, SSC provides BCLK and LRC clocks. + * + * The SSC transmit and receive clocks are generated + * from the MCK divider, and the BCLK signal + * is output on the SSC TK line. + */ + + if (bits > 16 && !ssc->pdata->has_fslen_ext) { + dev_err(dai->dev, + "sample size %d is too large for SSC device\n", + bits); + return -EINVAL; + } + + fslen_ext = (bits - 1) / 16; + fslen = (bits - 1) % 16; + + rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) + | SSC_BF(RCMR_STTDLY, START_DELAY) + | SSC_BF(RCMR_START, SSC_START_FALLING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_DIV); + + rfmr = SSC_BF(RFMR_FSLEN_EXT, fslen_ext) + | SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) + | SSC_BF(RFMR_FSLEN, fslen) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) + | SSC_BF(TCMR_STTDLY, START_DELAY) + | SSC_BF(TCMR_START, SSC_START_FALLING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) + | SSC_BF(TCMR_CKS, SSC_CKS_DIV); + + tfmr = SSC_BF(TFMR_FSLEN_EXT, fslen_ext) + | SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) + | SSC_BF(TFMR_FSLEN, fslen) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: + /* I2S format, CODEC supplies BCLK and LRC clocks. */ + rcmr = SSC_BF(RCMR_PERIOD, 0) + | SSC_BF(RCMR_STTDLY, START_DELAY) + | SSC_BF(RCMR_START, SSC_START_FALLING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ? + SSC_CKS_PIN : SSC_CKS_CLOCK); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) + | SSC_BF(RFMR_FSLEN, 0) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, 0) + | SSC_BF(TCMR_STTDLY, START_DELAY) + | SSC_BF(TCMR_START, SSC_START_FALLING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_NONE) + | SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ? + SSC_CKS_CLOCK : SSC_CKS_PIN); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) + | SSC_BF(TFMR_FSLEN, 0) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFS: + /* I2S format, CODEC supplies BCLK, SSC supplies LRCLK. */ + if (bits > 16 && !ssc->pdata->has_fslen_ext) { + dev_err(dai->dev, + "sample size %d is too large for SSC device\n", + bits); + return -EINVAL; + } + + fslen_ext = (bits - 1) / 16; + fslen = (bits - 1) % 16; + + rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) + | SSC_BF(RCMR_STTDLY, START_DELAY) + | SSC_BF(RCMR_START, SSC_START_FALLING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ? + SSC_CKS_PIN : SSC_CKS_CLOCK); + + rfmr = SSC_BF(RFMR_FSLEN_EXT, fslen_ext) + | SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) + | SSC_BF(RFMR_FSLEN, fslen) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) + | SSC_BF(TCMR_STTDLY, START_DELAY) + | SSC_BF(TCMR_START, SSC_START_FALLING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_NONE) + | SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ? + SSC_CKS_CLOCK : SSC_CKS_PIN); + + tfmr = SSC_BF(TFMR_FSLEN_EXT, fslen_ext) + | SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_NEGATIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) + | SSC_BF(TFMR_FSLEN, fslen) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: + /* + * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. + * + * The SSC transmit and receive clocks are generated from the + * MCK divider, and the BCLK signal is output + * on the SSC TK line. + */ + rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) + | SSC_BF(RCMR_STTDLY, 1) + | SSC_BF(RCMR_START, SSC_START_RISING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_DIV); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) + | SSC_BF(RFMR_FSLEN, 0) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) + | SSC_BF(TCMR_STTDLY, 1) + | SSC_BF(TCMR_START, SSC_START_RISING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) + | SSC_BF(TCMR_CKS, SSC_CKS_DIV); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) + | SSC_BF(TFMR_FSLEN, 0) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: + /* + * DSP/PCM Mode A format, CODEC supplies BCLK and LRC clocks. + * + * Data is transferred on first BCLK after LRC pulse rising + * edge.If stereo, the right channel data is contiguous with + * the left channel data. + */ + rcmr = SSC_BF(RCMR_PERIOD, 0) + | SSC_BF(RCMR_STTDLY, START_DELAY) + | SSC_BF(RCMR_START, SSC_START_RISING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ? + SSC_CKS_PIN : SSC_CKS_CLOCK); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) + | SSC_BF(RFMR_FSLEN, 0) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, 0) + | SSC_BF(TCMR_STTDLY, START_DELAY) + | SSC_BF(TCMR_START, SSC_START_RISING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ? + SSC_CKS_CLOCK : SSC_CKS_PIN); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) + | SSC_BF(TFMR_FSLEN, 0) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + default: + printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n", + ssc_p->daifmt); + return -EINVAL; + } + pr_debug("atmel_ssc_hw_params: " + "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", + rcmr, rfmr, tcmr, tfmr); + + if (!ssc_p->initialized) { + if (!ssc_p->ssc->pdata->use_dma) { + ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0); + + ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0); + } + + ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0, + ssc_p->name, ssc_p); + if (ret < 0) { + printk(KERN_WARNING + "atmel_ssc_dai: request_irq failure\n"); + pr_debug("Atmel_ssc_dai: Stoping clock\n"); + clk_disable(ssc_p->ssc->clk); + return ret; + } + + ssc_p->initialized = 1; + } + + /* set SSC clock mode register */ + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div); + + /* set receive clock mode and format */ + ssc_writel(ssc_p->ssc->regs, RCMR, rcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, rfmr); + + /* set transmit clock mode and format */ + ssc_writel(ssc_p->ssc->regs, TCMR, tcmr); + ssc_writel(ssc_p->ssc->regs, TFMR, tfmr); + + pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n"); + return 0; +} + + +static int atmel_ssc_prepare(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); + ssc_writel(ssc_p->ssc->regs, IDR, dma_params->mask->ssc_error); + + pr_debug("%s enabled SSC_SR=0x%08x\n", + dir ? "receive" : "transmit", + ssc_readl(ssc_p->ssc->regs, SR)); + return 0; +} + +static int atmel_ssc_trigger(struct snd_pcm_substream *substream, + int cmd, struct snd_soc_dai *dai) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); + break; + default: + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); + break; + } + + return 0; +} + +#ifdef CONFIG_PM +static int atmel_ssc_suspend(struct snd_soc_dai *cpu_dai) +{ + struct atmel_ssc_info *ssc_p; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* Save the status register before disabling transmit and receive */ + ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR); + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS)); + + /* Save the current interrupt mask, then disable unmasked interrupts */ + ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR); + ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr); + + ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR); + ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR); + ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR); + ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR); + ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR); + + return 0; +} + + + +static int atmel_ssc_resume(struct snd_soc_dai *cpu_dai) +{ + struct atmel_ssc_info *ssc_p; + u32 cr; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* restore SSC register settings */ + ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr); + ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr); + ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr); + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr); + + /* re-enable interrupts */ + ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr); + + /* Re-enable receive and transmit as appropriate */ + cr = 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0; + ssc_writel(ssc_p->ssc->regs, CR, cr); + + return 0; +} +#else /* CONFIG_PM */ +# define atmel_ssc_suspend NULL +# define atmel_ssc_resume NULL +#endif /* CONFIG_PM */ + +#define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static const struct snd_soc_dai_ops atmel_ssc_dai_ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .trigger = atmel_ssc_trigger, + .hw_params = atmel_ssc_hw_params, + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv, +}; + +static struct snd_soc_dai_driver atmel_ssc_dai = { + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 8000, + .rate_max = 384000, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 8000, + .rate_max = 384000, + .formats = ATMEL_SSC_FORMATS,}, + .ops = &atmel_ssc_dai_ops, +}; + +static const struct snd_soc_component_driver atmel_ssc_component = { + .name = "atmel-ssc", +}; + +static int asoc_ssc_init(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ssc_device *ssc = platform_get_drvdata(pdev); + int ret; + + ret = snd_soc_register_component(dev, &atmel_ssc_component, + &atmel_ssc_dai, 1); + if (ret) { + dev_err(dev, "Could not register DAI: %d\n", ret); + goto err; + } + + if (ssc->pdata->use_dma) + ret = atmel_pcm_dma_platform_register(dev); + else + ret = atmel_pcm_pdc_platform_register(dev); + + if (ret) { + dev_err(dev, "Could not register PCM: %d\n", ret); + goto err_unregister_dai; + } + + return 0; + +err_unregister_dai: + snd_soc_unregister_component(dev); +err: + return ret; +} + +static void asoc_ssc_exit(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct ssc_device *ssc = platform_get_drvdata(pdev); + + if (ssc->pdata->use_dma) + atmel_pcm_dma_platform_unregister(dev); + else + atmel_pcm_pdc_platform_unregister(dev); + + snd_soc_unregister_component(dev); +} + +/** + * atmel_ssc_set_audio - Allocate the specified SSC for audio use. + */ +int atmel_ssc_set_audio(int ssc_id) +{ + struct ssc_device *ssc; + int ret; + + /* If we can grab the SSC briefly to parent the DAI device off it */ + ssc = ssc_request(ssc_id); + if (IS_ERR(ssc)) { + pr_err("Unable to parent ASoC SSC DAI on SSC: %ld\n", + PTR_ERR(ssc)); + return PTR_ERR(ssc); + } else { + ssc_info[ssc_id].ssc = ssc; + } + + ret = asoc_ssc_init(&ssc->pdev->dev); + + return ret; +} +EXPORT_SYMBOL_GPL(atmel_ssc_set_audio); + +void atmel_ssc_put_audio(int ssc_id) +{ + struct ssc_device *ssc = ssc_info[ssc_id].ssc; + + asoc_ssc_exit(&ssc->pdev->dev); + ssc_free(ssc); +} +EXPORT_SYMBOL_GPL(atmel_ssc_put_audio); + +/* Module information */ +MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou@atmel.com, www.atmel.com"); +MODULE_DESCRIPTION("ATMEL SSC ASoC Interface"); +MODULE_LICENSE("GPL"); diff --git a/kernel/sound/soc/atmel/atmel_ssc_dai.h b/kernel/sound/soc/atmel/atmel_ssc_dai.h new file mode 100644 index 000000000..80b153857 --- /dev/null +++ b/kernel/sound/soc/atmel/atmel_ssc_dai.h @@ -0,0 +1,124 @@ +/* + * atmel_ssc_dai.h - ALSA SSC interface for the Atmel SoC + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Author: Sedji Gaouaou <sedji.gaouaou@atmel.com> + * ATMEL CORP. + * + * Based on at91-ssc.c by + * Frank Mandarino <fmandarino@endrelia.com> + * Based on pxa2xx Platform drivers by + * Liam Girdwood <lrg@slimlogic.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ATMEL_SSC_DAI_H +#define _ATMEL_SSC_DAI_H + +#include <linux/types.h> +#include <linux/atmel-ssc.h> + +#include "atmel-pcm.h" + +/* SSC system clock ids */ +#define ATMEL_SYSCLK_MCK 0 /* SSC uses AT91 MCK as system clock */ + +/* SSC divider ids */ +#define ATMEL_SSC_CMR_DIV 0 /* MCK divider for BCLK */ +#define ATMEL_SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */ +#define ATMEL_SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */ +/* + * SSC direction masks + */ +#define SSC_DIR_MASK_UNUSED 0 +#define SSC_DIR_MASK_PLAYBACK 1 +#define SSC_DIR_MASK_CAPTURE 2 + +/* + * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These + * are expected to be used with SSC_BF + */ +/* START bit field values */ +#define SSC_START_CONTINUOUS 0 +#define SSC_START_TX_RX 1 +#define SSC_START_LOW_RF 2 +#define SSC_START_HIGH_RF 3 +#define SSC_START_FALLING_RF 4 +#define SSC_START_RISING_RF 5 +#define SSC_START_LEVEL_RF 6 +#define SSC_START_EDGE_RF 7 +#define SSS_START_COMPARE_0 8 + +/* CKI bit field values */ +#define SSC_CKI_FALLING 0 +#define SSC_CKI_RISING 1 + +/* CKO bit field values */ +#define SSC_CKO_NONE 0 +#define SSC_CKO_CONTINUOUS 1 +#define SSC_CKO_TRANSFER 2 + +/* CKS bit field values */ +#define SSC_CKS_DIV 0 +#define SSC_CKS_CLOCK 1 +#define SSC_CKS_PIN 2 + +/* FSEDGE bit field values */ +#define SSC_FSEDGE_POSITIVE 0 +#define SSC_FSEDGE_NEGATIVE 1 + +/* FSOS bit field values */ +#define SSC_FSOS_NONE 0 +#define SSC_FSOS_NEGATIVE 1 +#define SSC_FSOS_POSITIVE 2 +#define SSC_FSOS_LOW 3 +#define SSC_FSOS_HIGH 4 +#define SSC_FSOS_TOGGLE 5 + +#define START_DELAY 1 + +struct atmel_ssc_state { + u32 ssc_cmr; + u32 ssc_rcmr; + u32 ssc_rfmr; + u32 ssc_tcmr; + u32 ssc_tfmr; + u32 ssc_sr; + u32 ssc_imr; +}; + + +struct atmel_ssc_info { + char *name; + struct ssc_device *ssc; + spinlock_t lock; /* lock for dir_mask */ + unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */ + unsigned short initialized; /* true if SSC has been initialized */ + unsigned short daifmt; + unsigned short cmr_div; + unsigned short tcmr_period; + unsigned short rcmr_period; + struct atmel_pcm_dma_params *dma_params[2]; + struct atmel_ssc_state ssc_state; + unsigned long mck_rate; +}; + +int atmel_ssc_set_audio(int ssc_id); +void atmel_ssc_put_audio(int ssc_id); + +#endif /* _AT91_SSC_DAI_H */ diff --git a/kernel/sound/soc/atmel/atmel_wm8904.c b/kernel/sound/soc/atmel/atmel_wm8904.c new file mode 100644 index 000000000..aa354e1c6 --- /dev/null +++ b/kernel/sound/soc/atmel/atmel_wm8904.c @@ -0,0 +1,195 @@ +/* + * atmel_wm8904 - Atmel ASoC driver for boards with WM8904 codec. + * + * Copyright (C) 2012 Atmel + * + * Author: Bo Shen <voice.shen@atmel.com> + * + * GPLv2 or later + */ + +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> + +#include <sound/soc.h> + +#include "../codecs/wm8904.h" +#include "atmel_ssc_dai.h" + +static const struct snd_soc_dapm_widget atmel_asoc_wm8904_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_MIC("Mic", NULL), + SND_SOC_DAPM_LINE("Line In Jack", NULL), +}; + +static int atmel_asoc_wm8904_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + int ret; + + ret = snd_soc_dai_set_pll(codec_dai, WM8904_FLL_MCLK, WM8904_FLL_MCLK, + 32768, params_rate(params) * 256); + if (ret < 0) { + pr_err("%s - failed to set wm8904 codec PLL.", __func__); + return ret; + } + + /* + * As here wm8904 use FLL output as its system clock + * so calling set_sysclk won't care freq parameter + * then we pass 0 + */ + ret = snd_soc_dai_set_sysclk(codec_dai, WM8904_CLK_FLL, + 0, SND_SOC_CLOCK_IN); + if (ret < 0) { + pr_err("%s -failed to set wm8904 SYSCLK\n", __func__); + return ret; + } + + return 0; +} + +static struct snd_soc_ops atmel_asoc_wm8904_ops = { + .hw_params = atmel_asoc_wm8904_hw_params, +}; + +static struct snd_soc_dai_link atmel_asoc_wm8904_dailink = { + .name = "WM8904", + .stream_name = "WM8904 PCM", + .codec_dai_name = "wm8904-hifi", + .dai_fmt = SND_SOC_DAIFMT_I2S + | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBM_CFM, + .ops = &atmel_asoc_wm8904_ops, +}; + +static struct snd_soc_card atmel_asoc_wm8904_card = { + .name = "atmel_asoc_wm8904", + .owner = THIS_MODULE, + .dai_link = &atmel_asoc_wm8904_dailink, + .num_links = 1, + .dapm_widgets = atmel_asoc_wm8904_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(atmel_asoc_wm8904_dapm_widgets), + .fully_routed = true, +}; + +static int atmel_asoc_wm8904_dt_init(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *codec_np, *cpu_np; + struct snd_soc_card *card = &atmel_asoc_wm8904_card; + struct snd_soc_dai_link *dailink = &atmel_asoc_wm8904_dailink; + int ret; + + if (!np) { + dev_err(&pdev->dev, "only device tree supported\n"); + return -EINVAL; + } + + ret = snd_soc_of_parse_card_name(card, "atmel,model"); + if (ret) { + dev_err(&pdev->dev, "failed to parse card name\n"); + return ret; + } + + ret = snd_soc_of_parse_audio_routing(card, "atmel,audio-routing"); + if (ret) { + dev_err(&pdev->dev, "failed to parse audio routing\n"); + return ret; + } + + cpu_np = of_parse_phandle(np, "atmel,ssc-controller", 0); + if (!cpu_np) { + dev_err(&pdev->dev, "failed to get dai and pcm info\n"); + ret = -EINVAL; + return ret; + } + dailink->cpu_of_node = cpu_np; + dailink->platform_of_node = cpu_np; + of_node_put(cpu_np); + + codec_np = of_parse_phandle(np, "atmel,audio-codec", 0); + if (!codec_np) { + dev_err(&pdev->dev, "failed to get codec info\n"); + ret = -EINVAL; + return ret; + } + dailink->codec_of_node = codec_np; + of_node_put(codec_np); + + return 0; +} + +static int atmel_asoc_wm8904_probe(struct platform_device *pdev) +{ + struct snd_soc_card *card = &atmel_asoc_wm8904_card; + struct snd_soc_dai_link *dailink = &atmel_asoc_wm8904_dailink; + int id, ret; + + card->dev = &pdev->dev; + ret = atmel_asoc_wm8904_dt_init(pdev); + if (ret) { + dev_err(&pdev->dev, "failed to init dt info\n"); + return ret; + } + + id = of_alias_get_id((struct device_node *)dailink->cpu_of_node, "ssc"); + ret = atmel_ssc_set_audio(id); + if (ret != 0) { + dev_err(&pdev->dev, "failed to set SSC %d for audio\n", id); + return ret; + } + + ret = snd_soc_register_card(card); + if (ret) { + dev_err(&pdev->dev, "snd_soc_register_card failed\n"); + goto err_set_audio; + } + + return 0; + +err_set_audio: + atmel_ssc_put_audio(id); + return ret; +} + +static int atmel_asoc_wm8904_remove(struct platform_device *pdev) +{ + struct snd_soc_card *card = platform_get_drvdata(pdev); + struct snd_soc_dai_link *dailink = &atmel_asoc_wm8904_dailink; + int id; + + id = of_alias_get_id((struct device_node *)dailink->cpu_of_node, "ssc"); + + snd_soc_unregister_card(card); + atmel_ssc_put_audio(id); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id atmel_asoc_wm8904_dt_ids[] = { + { .compatible = "atmel,asoc-wm8904", }, + { } +}; +#endif + +static struct platform_driver atmel_asoc_wm8904_driver = { + .driver = { + .name = "atmel-wm8904-audio", + .of_match_table = of_match_ptr(atmel_asoc_wm8904_dt_ids), + }, + .probe = atmel_asoc_wm8904_probe, + .remove = atmel_asoc_wm8904_remove, +}; + +module_platform_driver(atmel_asoc_wm8904_driver); + +/* Module information */ +MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>"); +MODULE_DESCRIPTION("ALSA SoC machine driver for Atmel EK with WM8904 codec"); +MODULE_LICENSE("GPL"); diff --git a/kernel/sound/soc/atmel/sam9g20_wm8731.c b/kernel/sound/soc/atmel/sam9g20_wm8731.c new file mode 100644 index 000000000..8de836165 --- /dev/null +++ b/kernel/sound/soc/atmel/sam9g20_wm8731.c @@ -0,0 +1,291 @@ +/* + * sam9g20_wm8731 -- SoC audio for AT91SAM9G20-based + * ATMEL AT91SAM9G20ek board. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou <sedji.gaouaou@atmel.com> + * + * Based on ati_b1_wm8731.c by: + * Frank Mandarino <fmandarino@endrelia.com> + * Copyright 2006 Endrelia Technologies Inc. + * Based on corgi.c by: + * Copyright 2005 Wolfson Microelectronics PLC. + * Copyright 2005 Openedhand Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/of.h> + +#include <linux/atmel-ssc.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> + +#include "../codecs/wm8731.h" +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" + +#define MCLK_RATE 12000000 + +/* + * As shipped the board does not have inputs. However, it is relatively + * straightforward to modify the board to hook them up so support is left + * in the driver. + */ +#undef ENABLE_MIC_INPUT + +static struct clk *mclk; + +static int at91sam9g20ek_set_bias_level(struct snd_soc_card *card, + struct snd_soc_dapm_context *dapm, + enum snd_soc_bias_level level) +{ + static int mclk_on; + int ret = 0; + + switch (level) { + case SND_SOC_BIAS_ON: + case SND_SOC_BIAS_PREPARE: + if (!mclk_on) + ret = clk_enable(mclk); + if (ret == 0) + mclk_on = 1; + break; + + case SND_SOC_BIAS_OFF: + case SND_SOC_BIAS_STANDBY: + if (mclk_on) + clk_disable(mclk); + mclk_on = 0; + break; + } + + return ret; +} + +static const struct snd_soc_dapm_widget at91sam9g20ek_dapm_widgets[] = { + SND_SOC_DAPM_MIC("Int Mic", NULL), + SND_SOC_DAPM_SPK("Ext Spk", NULL), +}; + +static const struct snd_soc_dapm_route intercon[] = { + + /* speaker connected to LHPOUT */ + {"Ext Spk", NULL, "LHPOUT"}, + + /* mic is connected to Mic Jack, with WM8731 Mic Bias */ + {"MICIN", NULL, "Mic Bias"}, + {"Mic Bias", NULL, "Int Mic"}, +}; + +/* + * Logic for a wm8731 as connected on a at91sam9g20ek board. + */ +static int at91sam9g20ek_wm8731_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_codec *codec = rtd->codec; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct snd_soc_dapm_context *dapm = &codec->dapm; + int ret; + + printk(KERN_DEBUG + "at91sam9g20ek_wm8731 " + ": at91sam9g20ek_wm8731_init() called\n"); + + ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_MCLK, + MCLK_RATE, SND_SOC_CLOCK_IN); + if (ret < 0) { + printk(KERN_ERR "Failed to set WM8731 SYSCLK: %d\n", ret); + return ret; + } + + /* not connected */ + snd_soc_dapm_nc_pin(dapm, "RLINEIN"); + snd_soc_dapm_nc_pin(dapm, "LLINEIN"); + +#ifndef ENABLE_MIC_INPUT + snd_soc_dapm_nc_pin(&rtd->card->dapm, "Int Mic"); +#endif + + return 0; +} + +static struct snd_soc_dai_link at91sam9g20ek_dai = { + .name = "WM8731", + .stream_name = "WM8731 PCM", + .cpu_dai_name = "at91rm9200_ssc.0", + .codec_dai_name = "wm8731-hifi", + .init = at91sam9g20ek_wm8731_init, + .platform_name = "at91rm9200_ssc.0", + .codec_name = "wm8731.0-001b", + .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM, +}; + +static struct snd_soc_card snd_soc_at91sam9g20ek = { + .name = "AT91SAMG20-EK", + .owner = THIS_MODULE, + .dai_link = &at91sam9g20ek_dai, + .num_links = 1, + .set_bias_level = at91sam9g20ek_set_bias_level, + + .dapm_widgets = at91sam9g20ek_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(at91sam9g20ek_dapm_widgets), + .dapm_routes = intercon, + .num_dapm_routes = ARRAY_SIZE(intercon), +}; + +static int at91sam9g20ek_audio_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *codec_np, *cpu_np; + struct clk *pllb; + struct snd_soc_card *card = &snd_soc_at91sam9g20ek; + int ret; + + if (!np) { + return -ENODEV; + } + + ret = atmel_ssc_set_audio(0); + if (ret) { + dev_err(&pdev->dev, "ssc channel is not valid\n"); + return -EINVAL; + } + + /* + * Codec MCLK is supplied by PCK0 - set it up. + */ + mclk = clk_get(NULL, "pck0"); + if (IS_ERR(mclk)) { + printk(KERN_ERR "ASoC: Failed to get MCLK\n"); + ret = PTR_ERR(mclk); + goto err; + } + + pllb = clk_get(NULL, "pllb"); + if (IS_ERR(pllb)) { + printk(KERN_ERR "ASoC: Failed to get PLLB\n"); + ret = PTR_ERR(pllb); + goto err_mclk; + } + ret = clk_set_parent(mclk, pllb); + clk_put(pllb); + if (ret != 0) { + printk(KERN_ERR "ASoC: Failed to set MCLK parent\n"); + goto err_mclk; + } + + clk_set_rate(mclk, MCLK_RATE); + + card->dev = &pdev->dev; + + /* Parse device node info */ + ret = snd_soc_of_parse_card_name(card, "atmel,model"); + if (ret) + goto err; + + ret = snd_soc_of_parse_audio_routing(card, + "atmel,audio-routing"); + if (ret) + goto err; + + /* Parse codec info */ + at91sam9g20ek_dai.codec_name = NULL; + codec_np = of_parse_phandle(np, "atmel,audio-codec", 0); + if (!codec_np) { + dev_err(&pdev->dev, "codec info missing\n"); + return -EINVAL; + } + at91sam9g20ek_dai.codec_of_node = codec_np; + + /* Parse dai and platform info */ + at91sam9g20ek_dai.cpu_dai_name = NULL; + at91sam9g20ek_dai.platform_name = NULL; + cpu_np = of_parse_phandle(np, "atmel,ssc-controller", 0); + if (!cpu_np) { + dev_err(&pdev->dev, "dai and pcm info missing\n"); + return -EINVAL; + } + at91sam9g20ek_dai.cpu_of_node = cpu_np; + at91sam9g20ek_dai.platform_of_node = cpu_np; + + of_node_put(codec_np); + of_node_put(cpu_np); + + ret = snd_soc_register_card(card); + if (ret) { + printk(KERN_ERR "ASoC: snd_soc_register_card() failed\n"); + } + + return ret; + +err_mclk: + clk_put(mclk); + mclk = NULL; +err: + atmel_ssc_put_audio(0); + return ret; +} + +static int at91sam9g20ek_audio_remove(struct platform_device *pdev) +{ + struct snd_soc_card *card = platform_get_drvdata(pdev); + + clk_disable(mclk); + mclk = NULL; + snd_soc_unregister_card(card); + atmel_ssc_put_audio(0); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id at91sam9g20ek_wm8731_dt_ids[] = { + { .compatible = "atmel,at91sam9g20ek-wm8731-audio", }, + { } +}; +MODULE_DEVICE_TABLE(of, at91sam9g20ek_wm8731_dt_ids); +#endif + +static struct platform_driver at91sam9g20ek_audio_driver = { + .driver = { + .name = "at91sam9g20ek-audio", + .of_match_table = of_match_ptr(at91sam9g20ek_wm8731_dt_ids), + }, + .probe = at91sam9g20ek_audio_probe, + .remove = at91sam9g20ek_audio_remove, +}; + +module_platform_driver(at91sam9g20ek_audio_driver); + +/* Module information */ +MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou@atmel.com>"); +MODULE_DESCRIPTION("ALSA SoC AT91SAM9G20EK_WM8731"); +MODULE_ALIAS("platform:at91sam9g20ek-audio"); +MODULE_LICENSE("GPL"); diff --git a/kernel/sound/soc/atmel/sam9x5_wm8731.c b/kernel/sound/soc/atmel/sam9x5_wm8731.c new file mode 100644 index 000000000..ccdf547f4 --- /dev/null +++ b/kernel/sound/soc/atmel/sam9x5_wm8731.c @@ -0,0 +1,207 @@ +/* + * sam9x5_wm8731 -- SoC audio for AT91SAM9X5-based boards + * that are using WM8731 as codec. + * + * Copyright (C) 2011 Atmel, + * Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Copyright (C) 2013 Paratronic, + * Richard Genoud <richard.genoud@gmail.com> + * + * Based on sam9g20_wm8731.c by: + * Sedji Gaouaou <sedji.gaouaou@atmel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/of.h> +#include <linux/export.h> +#include <linux/module.h> +#include <linux/mod_devicetable.h> +#include <linux/platform_device.h> +#include <linux/device.h> + +#include <sound/soc.h> +#include <sound/soc-dai.h> +#include <sound/soc-dapm.h> + +#include "../codecs/wm8731.h" +#include "atmel_ssc_dai.h" + + +#define MCLK_RATE 12288000 + +#define DRV_NAME "sam9x5-snd-wm8731" + +struct sam9x5_drvdata { + int ssc_id; +}; + +/* + * Logic for a wm8731 as connected on a at91sam9x5ek based board. + */ +static int sam9x5_wm8731_init(struct snd_soc_pcm_runtime *rtd) +{ + struct snd_soc_dai *codec_dai = rtd->codec_dai; + struct device *dev = rtd->dev; + int ret; + + dev_dbg(dev, "ASoC: %s called\n", __func__); + + /* set the codec system clock for DAC and ADC */ + ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL, + MCLK_RATE, SND_SOC_CLOCK_IN); + if (ret < 0) { + dev_err(dev, "ASoC: Failed to set WM8731 SYSCLK: %d\n", ret); + return ret; + } + + return 0; +} + +/* + * Audio paths on at91sam9x5ek board: + * + * |A| ------------> | | ---R----> Headphone Jack + * |T| <----\ | WM | ---L--/ + * |9| ---> CLK <--> | 8731 | <--R----- Line In Jack + * |1| <------------ | | <--L--/ + */ +static const struct snd_soc_dapm_widget sam9x5_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_LINE("Line In Jack", NULL), +}; + +static int sam9x5_wm8731_driver_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *codec_np, *cpu_np; + struct snd_soc_card *card; + struct snd_soc_dai_link *dai; + struct sam9x5_drvdata *priv; + int ret; + + if (!np) { + dev_err(&pdev->dev, "No device node supplied\n"); + return -EINVAL; + } + + card = devm_kzalloc(&pdev->dev, sizeof(*card), GFP_KERNEL); + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + dai = devm_kzalloc(&pdev->dev, sizeof(*dai), GFP_KERNEL); + if (!dai || !card || !priv) { + ret = -ENOMEM; + goto out; + } + + snd_soc_card_set_drvdata(card, priv); + + card->dev = &pdev->dev; + card->owner = THIS_MODULE; + card->dai_link = dai; + card->num_links = 1; + card->dapm_widgets = sam9x5_dapm_widgets; + card->num_dapm_widgets = ARRAY_SIZE(sam9x5_dapm_widgets); + dai->name = "WM8731"; + dai->stream_name = "WM8731 PCM"; + dai->codec_dai_name = "wm8731-hifi"; + dai->init = sam9x5_wm8731_init; + dai->dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF + | SND_SOC_DAIFMT_CBM_CFM; + + ret = snd_soc_of_parse_card_name(card, "atmel,model"); + if (ret) { + dev_err(&pdev->dev, "atmel,model node missing\n"); + goto out; + } + + ret = snd_soc_of_parse_audio_routing(card, "atmel,audio-routing"); + if (ret) { + dev_err(&pdev->dev, "atmel,audio-routing node missing\n"); + goto out; + } + + codec_np = of_parse_phandle(np, "atmel,audio-codec", 0); + if (!codec_np) { + dev_err(&pdev->dev, "atmel,audio-codec node missing\n"); + ret = -EINVAL; + goto out; + } + + dai->codec_of_node = codec_np; + + cpu_np = of_parse_phandle(np, "atmel,ssc-controller", 0); + if (!cpu_np) { + dev_err(&pdev->dev, "atmel,ssc-controller node missing\n"); + ret = -EINVAL; + goto out; + } + dai->cpu_of_node = cpu_np; + dai->platform_of_node = cpu_np; + + priv->ssc_id = of_alias_get_id(cpu_np, "ssc"); + + ret = atmel_ssc_set_audio(priv->ssc_id); + if (ret != 0) { + dev_err(&pdev->dev, + "ASoC: Failed to set SSC %d for audio: %d\n", + ret, priv->ssc_id); + goto out; + } + + of_node_put(codec_np); + of_node_put(cpu_np); + + ret = snd_soc_register_card(card); + if (ret) { + dev_err(&pdev->dev, + "ASoC: Platform device allocation failed\n"); + goto out_put_audio; + } + + dev_dbg(&pdev->dev, "ASoC: %s ok\n", __func__); + + return ret; + +out_put_audio: + atmel_ssc_put_audio(priv->ssc_id); +out: + return ret; +} + +static int sam9x5_wm8731_driver_remove(struct platform_device *pdev) +{ + struct snd_soc_card *card = platform_get_drvdata(pdev); + struct sam9x5_drvdata *priv = card->drvdata; + + snd_soc_unregister_card(card); + atmel_ssc_put_audio(priv->ssc_id); + + return 0; +} + +static const struct of_device_id sam9x5_wm8731_of_match[] = { + { .compatible = "atmel,sam9x5-wm8731-audio", }, + {}, +}; +MODULE_DEVICE_TABLE(of, sam9x5_wm8731_of_match); + +static struct platform_driver sam9x5_wm8731_driver = { + .driver = { + .name = DRV_NAME, + .of_match_table = of_match_ptr(sam9x5_wm8731_of_match), + }, + .probe = sam9x5_wm8731_driver_probe, + .remove = sam9x5_wm8731_driver_remove, +}; +module_platform_driver(sam9x5_wm8731_driver); + +/* Module information */ +MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>"); +MODULE_AUTHOR("Richard Genoud <richard.genoud@gmail.com>"); +MODULE_DESCRIPTION("ALSA SoC machine driver for AT91SAM9x5 - WM8731"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); |