summaryrefslogtreecommitdiffstats
path: root/kernel/sound/soc/atmel
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/sound/soc/atmel')
-rw-r--r--kernel/sound/soc/atmel/Kconfig57
-rw-r--r--kernel/sound/soc/atmel/Makefile17
-rw-r--r--kernel/sound/soc/atmel/atmel-pcm-dma.c140
-rw-r--r--kernel/sound/soc/atmel/atmel-pcm-pdc.c416
-rw-r--r--kernel/sound/soc/atmel/atmel-pcm.h114
-rw-r--r--kernel/sound/soc/atmel/atmel_ssc_dai.c1004
-rw-r--r--kernel/sound/soc/atmel/atmel_ssc_dai.h124
-rw-r--r--kernel/sound/soc/atmel/atmel_wm8904.c195
-rw-r--r--kernel/sound/soc/atmel/sam9g20_wm8731.c291
-rw-r--r--kernel/sound/soc/atmel/sam9x5_wm8731.c207
10 files changed, 2565 insertions, 0 deletions
diff --git a/kernel/sound/soc/atmel/Kconfig b/kernel/sound/soc/atmel/Kconfig
new file mode 100644
index 000000000..e7d08806f
--- /dev/null
+++ b/kernel/sound/soc/atmel/Kconfig
@@ -0,0 +1,57 @@
+config SND_ATMEL_SOC
+ tristate "SoC Audio for the Atmel System-on-Chip"
+ depends on HAS_IOMEM
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the ATMEL SSC interface. You will also need
+ to select the audio interfaces to support below.
+
+config SND_ATMEL_SOC_PDC
+ tristate
+ depends on SND_ATMEL_SOC
+
+config SND_ATMEL_SOC_DMA
+ tristate
+ depends on SND_ATMEL_SOC
+ select SND_SOC_GENERIC_DMAENGINE_PCM
+
+config SND_ATMEL_SOC_SSC
+ tristate
+ depends on SND_ATMEL_SOC
+ help
+ Say Y or M if you want to add support for codecs the
+ ATMEL SSC interface. You will also needs to select the individual
+ machine drivers to support below.
+
+config SND_AT91_SOC_SAM9G20_WM8731
+ tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
+ depends on ARCH_AT91 || COMPILE_TEST
+ depends on ATMEL_SSC && SND_ATMEL_SOC && SND_SOC_I2C_AND_SPI
+ select SND_ATMEL_SOC_PDC
+ select SND_ATMEL_SOC_SSC
+ select SND_SOC_WM8731
+ help
+ Say Y if you want to add support for SoC audio on WM8731-based
+ AT91sam9g20 evaluation board.
+
+config SND_ATMEL_SOC_WM8904
+ tristate "Atmel ASoC driver for boards using WM8904 codec"
+ depends on ARCH_AT91 || COMPILE_TEST
+ depends on ATMEL_SSC && SND_ATMEL_SOC && I2C
+ select SND_ATMEL_SOC_SSC
+ select SND_ATMEL_SOC_DMA
+ select SND_SOC_WM8904
+ help
+ Say Y if you want to add support for Atmel ASoC driver for boards using
+ WM8904 codec.
+
+config SND_AT91_SOC_SAM9X5_WM8731
+ tristate "SoC Audio support for WM8731-based at91sam9x5 board"
+ depends on ARCH_AT91 || COMPILE_TEST
+ depends on ATMEL_SSC && SND_ATMEL_SOC && SND_SOC_I2C_AND_SPI
+ select SND_ATMEL_SOC_SSC
+ select SND_ATMEL_SOC_DMA
+ select SND_SOC_WM8731
+ help
+ Say Y if you want to add support for audio SoC on an
+ at91sam9x5 based board that is using WM8731 codec.
diff --git a/kernel/sound/soc/atmel/Makefile b/kernel/sound/soc/atmel/Makefile
new file mode 100644
index 000000000..b327e5cc8
--- /dev/null
+++ b/kernel/sound/soc/atmel/Makefile
@@ -0,0 +1,17 @@
+# AT91 Platform Support
+snd-soc-atmel-pcm-pdc-objs := atmel-pcm-pdc.o
+snd-soc-atmel-pcm-dma-objs := atmel-pcm-dma.o
+snd-soc-atmel_ssc_dai-objs := atmel_ssc_dai.o
+
+obj-$(CONFIG_SND_ATMEL_SOC_PDC) += snd-soc-atmel-pcm-pdc.o
+obj-$(CONFIG_SND_ATMEL_SOC_DMA) += snd-soc-atmel-pcm-dma.o
+obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o
+
+# AT91 Machine Support
+snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o
+snd-atmel-soc-wm8904-objs := atmel_wm8904.o
+snd-soc-sam9x5-wm8731-objs := sam9x5_wm8731.o
+
+obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o
+obj-$(CONFIG_SND_ATMEL_SOC_WM8904) += snd-atmel-soc-wm8904.o
+obj-$(CONFIG_SND_AT91_SOC_SAM9X5_WM8731) += snd-soc-sam9x5-wm8731.o
diff --git a/kernel/sound/soc/atmel/atmel-pcm-dma.c b/kernel/sound/soc/atmel/atmel-pcm-dma.c
new file mode 100644
index 000000000..b6625c8c4
--- /dev/null
+++ b/kernel/sound/soc/atmel/atmel-pcm-dma.c
@@ -0,0 +1,140 @@
+/*
+ * atmel-pcm-dma.c -- ALSA PCM DMA support for the Atmel SoC.
+ *
+ * Copyright (C) 2012 Atmel
+ *
+ * Author: Bo Shen <voice.shen@atmel.com>
+ *
+ * Based on atmel-pcm by:
+ * Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ * Copyright 2008 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/atmel-ssc.h>
+#include <linux/platform_data/dma-atmel.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/dmaengine_pcm.h>
+
+#include "atmel-pcm.h"
+
+/*--------------------------------------------------------------------------*\
+ * Hardware definition
+\*--------------------------------------------------------------------------*/
+static const struct snd_pcm_hardware atmel_pcm_dma_hardware = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_RESUME |
+ SNDRV_PCM_INFO_PAUSE,
+ .period_bytes_min = 256, /* lighting DMA overhead */
+ .period_bytes_max = 2 * 0xffff, /* if 2 bytes format */
+ .periods_min = 8,
+ .periods_max = 1024, /* no limit */
+ .buffer_bytes_max = 512 * 1024,
+};
+
+/**
+ * atmel_pcm_dma_irq: SSC interrupt handler for DMAENGINE enabled SSC
+ *
+ * We use DMAENGINE to send/receive data to/from SSC so this ISR is only to
+ * check if any overrun occured.
+ */
+static void atmel_pcm_dma_irq(u32 ssc_sr,
+ struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct atmel_pcm_dma_params *prtd;
+
+ prtd = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+
+ if (ssc_sr & prtd->mask->ssc_error) {
+ if (snd_pcm_running(substream))
+ pr_warn("atmel-pcm: buffer %s on %s (SSC_SR=%#x)\n",
+ substream->stream == SNDRV_PCM_STREAM_PLAYBACK
+ ? "underrun" : "overrun", prtd->name,
+ ssc_sr);
+
+ /* stop RX and capture: will be enabled again at restart */
+ ssc_writex(prtd->ssc->regs, SSC_CR, prtd->mask->ssc_disable);
+ snd_pcm_stop_xrun(substream);
+
+ /* now drain RHR and read status to remove xrun condition */
+ ssc_readx(prtd->ssc->regs, SSC_RHR);
+ ssc_readx(prtd->ssc->regs, SSC_SR);
+ }
+}
+
+static int atmel_pcm_configure_dma(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params, struct dma_slave_config *slave_config)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct atmel_pcm_dma_params *prtd;
+ struct ssc_device *ssc;
+ int ret;
+
+ prtd = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+ ssc = prtd->ssc;
+
+ ret = snd_hwparams_to_dma_slave_config(substream, params, slave_config);
+ if (ret) {
+ pr_err("atmel-pcm: hwparams to dma slave configure failed\n");
+ return ret;
+ }
+
+ slave_config->dst_addr = ssc->phybase + SSC_THR;
+ slave_config->dst_maxburst = 1;
+
+ slave_config->src_addr = ssc->phybase + SSC_RHR;
+ slave_config->src_maxburst = 1;
+
+ prtd->dma_intr_handler = atmel_pcm_dma_irq;
+
+ return 0;
+}
+
+static const struct snd_dmaengine_pcm_config atmel_dmaengine_pcm_config = {
+ .prepare_slave_config = atmel_pcm_configure_dma,
+ .pcm_hardware = &atmel_pcm_dma_hardware,
+ .prealloc_buffer_size = 64 * 1024,
+};
+
+int atmel_pcm_dma_platform_register(struct device *dev)
+{
+ return snd_dmaengine_pcm_register(dev, &atmel_dmaengine_pcm_config,
+ SND_DMAENGINE_PCM_FLAG_NO_RESIDUE);
+}
+EXPORT_SYMBOL(atmel_pcm_dma_platform_register);
+
+void atmel_pcm_dma_platform_unregister(struct device *dev)
+{
+ snd_dmaengine_pcm_unregister(dev);
+}
+EXPORT_SYMBOL(atmel_pcm_dma_platform_unregister);
+
+MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>");
+MODULE_DESCRIPTION("Atmel DMA based PCM module");
+MODULE_LICENSE("GPL");
diff --git a/kernel/sound/soc/atmel/atmel-pcm-pdc.c b/kernel/sound/soc/atmel/atmel-pcm-pdc.c
new file mode 100644
index 000000000..da861b444
--- /dev/null
+++ b/kernel/sound/soc/atmel/atmel-pcm-pdc.c
@@ -0,0 +1,416 @@
+/*
+ * atmel-pcm.c -- ALSA PCM interface for the Atmel atmel SoC.
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Authors: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ *
+ * Based on at91-pcm. by:
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Copyright 2006 Endrelia Technologies Inc.
+ *
+ * Based on pxa2xx-pcm.c by:
+ *
+ * Author: Nicolas Pitre
+ * Created: Nov 30, 2004
+ * Copyright: (C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/atmel_pdc.h>
+#include <linux/atmel-ssc.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include "atmel-pcm.h"
+
+
+static int atmel_pcm_preallocate_dma_buffer(struct snd_pcm *pcm,
+ int stream)
+{
+ struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+ struct snd_dma_buffer *buf = &substream->dma_buffer;
+ size_t size = ATMEL_SSC_DMABUF_SIZE;
+
+ buf->dev.type = SNDRV_DMA_TYPE_DEV;
+ buf->dev.dev = pcm->card->dev;
+ buf->private_data = NULL;
+ buf->area = dma_alloc_coherent(pcm->card->dev, size,
+ &buf->addr, GFP_KERNEL);
+ pr_debug("atmel-pcm: alloc dma buffer: area=%p, addr=%p, size=%zu\n",
+ (void *)buf->area, (void *)(long)buf->addr, size);
+
+ if (!buf->area)
+ return -ENOMEM;
+
+ buf->bytes = size;
+ return 0;
+}
+
+static int atmel_pcm_mmap(struct snd_pcm_substream *substream,
+ struct vm_area_struct *vma)
+{
+ return remap_pfn_range(vma, vma->vm_start,
+ substream->dma_buffer.addr >> PAGE_SHIFT,
+ vma->vm_end - vma->vm_start, vma->vm_page_prot);
+}
+
+static int atmel_pcm_new(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_card *card = rtd->card->snd_card;
+ struct snd_pcm *pcm = rtd->pcm;
+ int ret;
+
+ ret = dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32));
+ if (ret)
+ return ret;
+
+ if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) {
+ pr_debug("atmel-pcm: allocating PCM playback DMA buffer\n");
+ ret = atmel_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_PLAYBACK);
+ if (ret)
+ goto out;
+ }
+
+ if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) {
+ pr_debug("atmel-pcm: allocating PCM capture DMA buffer\n");
+ ret = atmel_pcm_preallocate_dma_buffer(pcm,
+ SNDRV_PCM_STREAM_CAPTURE);
+ if (ret)
+ goto out;
+ }
+ out:
+ return ret;
+}
+
+static void atmel_pcm_free(struct snd_pcm *pcm)
+{
+ struct snd_pcm_substream *substream;
+ struct snd_dma_buffer *buf;
+ int stream;
+
+ for (stream = 0; stream < 2; stream++) {
+ substream = pcm->streams[stream].substream;
+ if (!substream)
+ continue;
+
+ buf = &substream->dma_buffer;
+ if (!buf->area)
+ continue;
+ dma_free_coherent(pcm->card->dev, buf->bytes,
+ buf->area, buf->addr);
+ buf->area = NULL;
+ }
+}
+
+/*--------------------------------------------------------------------------*\
+ * Hardware definition
+\*--------------------------------------------------------------------------*/
+/* TODO: These values were taken from the AT91 platform driver, check
+ * them against real values for AT32
+ */
+static const struct snd_pcm_hardware atmel_pcm_hardware = {
+ .info = SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_PAUSE,
+ .period_bytes_min = 32,
+ .period_bytes_max = 8192,
+ .periods_min = 2,
+ .periods_max = 1024,
+ .buffer_bytes_max = ATMEL_SSC_DMABUF_SIZE,
+};
+
+
+/*--------------------------------------------------------------------------*\
+ * Data types
+\*--------------------------------------------------------------------------*/
+struct atmel_runtime_data {
+ struct atmel_pcm_dma_params *params;
+ dma_addr_t dma_buffer; /* physical address of dma buffer */
+ dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */
+ size_t period_size;
+
+ dma_addr_t period_ptr; /* physical address of next period */
+};
+
+/*--------------------------------------------------------------------------*\
+ * ISR
+\*--------------------------------------------------------------------------*/
+static void atmel_pcm_dma_irq(u32 ssc_sr,
+ struct snd_pcm_substream *substream)
+{
+ struct atmel_runtime_data *prtd = substream->runtime->private_data;
+ struct atmel_pcm_dma_params *params = prtd->params;
+ static int count;
+
+ count++;
+
+ if (ssc_sr & params->mask->ssc_endbuf) {
+ pr_warn("atmel-pcm: buffer %s on %s (SSC_SR=%#x, count=%d)\n",
+ substream->stream == SNDRV_PCM_STREAM_PLAYBACK
+ ? "underrun" : "overrun",
+ params->name, ssc_sr, count);
+
+ /* re-start the PDC */
+ ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+ params->mask->pdc_disable);
+ prtd->period_ptr += prtd->period_size;
+ if (prtd->period_ptr >= prtd->dma_buffer_end)
+ prtd->period_ptr = prtd->dma_buffer;
+
+ ssc_writex(params->ssc->regs, params->pdc->xpr,
+ prtd->period_ptr);
+ ssc_writex(params->ssc->regs, params->pdc->xcr,
+ prtd->period_size / params->pdc_xfer_size);
+ ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+ params->mask->pdc_enable);
+ }
+
+ if (ssc_sr & params->mask->ssc_endx) {
+ /* Load the PDC next pointer and counter registers */
+ prtd->period_ptr += prtd->period_size;
+ if (prtd->period_ptr >= prtd->dma_buffer_end)
+ prtd->period_ptr = prtd->dma_buffer;
+
+ ssc_writex(params->ssc->regs, params->pdc->xnpr,
+ prtd->period_ptr);
+ ssc_writex(params->ssc->regs, params->pdc->xncr,
+ prtd->period_size / params->pdc_xfer_size);
+ }
+
+ snd_pcm_period_elapsed(substream);
+}
+
+
+/*--------------------------------------------------------------------------*\
+ * PCM operations
+\*--------------------------------------------------------------------------*/
+static int atmel_pcm_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct atmel_runtime_data *prtd = runtime->private_data;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+
+ /* this may get called several times by oss emulation
+ * with different params */
+
+ snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+ runtime->dma_bytes = params_buffer_bytes(params);
+
+ prtd->params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+ prtd->params->dma_intr_handler = atmel_pcm_dma_irq;
+
+ prtd->dma_buffer = runtime->dma_addr;
+ prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes;
+ prtd->period_size = params_period_bytes(params);
+
+ pr_debug("atmel-pcm: "
+ "hw_params: DMA for %s initialized "
+ "(dma_bytes=%zu, period_size=%zu)\n",
+ prtd->params->name,
+ runtime->dma_bytes,
+ prtd->period_size);
+ return 0;
+}
+
+static int atmel_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+ struct atmel_runtime_data *prtd = substream->runtime->private_data;
+ struct atmel_pcm_dma_params *params = prtd->params;
+
+ if (params != NULL) {
+ ssc_writex(params->ssc->regs, SSC_PDC_PTCR,
+ params->mask->pdc_disable);
+ prtd->params->dma_intr_handler = NULL;
+ }
+
+ return 0;
+}
+
+static int atmel_pcm_prepare(struct snd_pcm_substream *substream)
+{
+ struct atmel_runtime_data *prtd = substream->runtime->private_data;
+ struct atmel_pcm_dma_params *params = prtd->params;
+
+ ssc_writex(params->ssc->regs, SSC_IDR,
+ params->mask->ssc_endx | params->mask->ssc_endbuf);
+ ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+ params->mask->pdc_disable);
+ return 0;
+}
+
+static int atmel_pcm_trigger(struct snd_pcm_substream *substream,
+ int cmd)
+{
+ struct snd_pcm_runtime *rtd = substream->runtime;
+ struct atmel_runtime_data *prtd = rtd->private_data;
+ struct atmel_pcm_dma_params *params = prtd->params;
+ int ret = 0;
+
+ pr_debug("atmel-pcm:buffer_size = %ld,"
+ "dma_area = %p, dma_bytes = %zu\n",
+ rtd->buffer_size, rtd->dma_area, rtd->dma_bytes);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ prtd->period_ptr = prtd->dma_buffer;
+
+ ssc_writex(params->ssc->regs, params->pdc->xpr,
+ prtd->period_ptr);
+ ssc_writex(params->ssc->regs, params->pdc->xcr,
+ prtd->period_size / params->pdc_xfer_size);
+
+ prtd->period_ptr += prtd->period_size;
+ ssc_writex(params->ssc->regs, params->pdc->xnpr,
+ prtd->period_ptr);
+ ssc_writex(params->ssc->regs, params->pdc->xncr,
+ prtd->period_size / params->pdc_xfer_size);
+
+ pr_debug("atmel-pcm: trigger: "
+ "period_ptr=%lx, xpr=%u, "
+ "xcr=%u, xnpr=%u, xncr=%u\n",
+ (unsigned long)prtd->period_ptr,
+ ssc_readx(params->ssc->regs, params->pdc->xpr),
+ ssc_readx(params->ssc->regs, params->pdc->xcr),
+ ssc_readx(params->ssc->regs, params->pdc->xnpr),
+ ssc_readx(params->ssc->regs, params->pdc->xncr));
+
+ ssc_writex(params->ssc->regs, SSC_IER,
+ params->mask->ssc_endx | params->mask->ssc_endbuf);
+ ssc_writex(params->ssc->regs, SSC_PDC_PTCR,
+ params->mask->pdc_enable);
+
+ pr_debug("sr=%u imr=%u\n",
+ ssc_readx(params->ssc->regs, SSC_SR),
+ ssc_readx(params->ssc->regs, SSC_IER));
+ break; /* SNDRV_PCM_TRIGGER_START */
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+ params->mask->pdc_disable);
+ break;
+
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR,
+ params->mask->pdc_enable);
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static snd_pcm_uframes_t atmel_pcm_pointer(
+ struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct atmel_runtime_data *prtd = runtime->private_data;
+ struct atmel_pcm_dma_params *params = prtd->params;
+ dma_addr_t ptr;
+ snd_pcm_uframes_t x;
+
+ ptr = (dma_addr_t) ssc_readx(params->ssc->regs, params->pdc->xpr);
+ x = bytes_to_frames(runtime, ptr - prtd->dma_buffer);
+
+ if (x == runtime->buffer_size)
+ x = 0;
+
+ return x;
+}
+
+static int atmel_pcm_open(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct atmel_runtime_data *prtd;
+ int ret = 0;
+
+ snd_soc_set_runtime_hwparams(substream, &atmel_pcm_hardware);
+
+ /* ensure that buffer size is a multiple of period size */
+ ret = snd_pcm_hw_constraint_integer(runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0)
+ goto out;
+
+ prtd = kzalloc(sizeof(struct atmel_runtime_data), GFP_KERNEL);
+ if (prtd == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ runtime->private_data = prtd;
+
+ out:
+ return ret;
+}
+
+static int atmel_pcm_close(struct snd_pcm_substream *substream)
+{
+ struct atmel_runtime_data *prtd = substream->runtime->private_data;
+
+ kfree(prtd);
+ return 0;
+}
+
+static struct snd_pcm_ops atmel_pcm_ops = {
+ .open = atmel_pcm_open,
+ .close = atmel_pcm_close,
+ .ioctl = snd_pcm_lib_ioctl,
+ .hw_params = atmel_pcm_hw_params,
+ .hw_free = atmel_pcm_hw_free,
+ .prepare = atmel_pcm_prepare,
+ .trigger = atmel_pcm_trigger,
+ .pointer = atmel_pcm_pointer,
+ .mmap = atmel_pcm_mmap,
+};
+
+static struct snd_soc_platform_driver atmel_soc_platform = {
+ .ops = &atmel_pcm_ops,
+ .pcm_new = atmel_pcm_new,
+ .pcm_free = atmel_pcm_free,
+};
+
+int atmel_pcm_pdc_platform_register(struct device *dev)
+{
+ return snd_soc_register_platform(dev, &atmel_soc_platform);
+}
+EXPORT_SYMBOL(atmel_pcm_pdc_platform_register);
+
+void atmel_pcm_pdc_platform_unregister(struct device *dev)
+{
+ snd_soc_unregister_platform(dev);
+}
+EXPORT_SYMBOL(atmel_pcm_pdc_platform_unregister);
+
+MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou@atmel.com>");
+MODULE_DESCRIPTION("Atmel PCM module");
+MODULE_LICENSE("GPL");
diff --git a/kernel/sound/soc/atmel/atmel-pcm.h b/kernel/sound/soc/atmel/atmel-pcm.h
new file mode 100644
index 000000000..6eaf081ca
--- /dev/null
+++ b/kernel/sound/soc/atmel/atmel-pcm.h
@@ -0,0 +1,114 @@
+/*
+ * at91-pcm.h - ALSA PCM interface for the Atmel AT91 SoC.
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Authors: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ *
+ * Based on at91-pcm. by:
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Copyright 2006 Endrelia Technologies Inc.
+ *
+ * Based on pxa2xx-pcm.c by:
+ *
+ * Author: Nicolas Pitre
+ * Created: Nov 30, 2004
+ * Copyright: (C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ATMEL_PCM_H
+#define _ATMEL_PCM_H
+
+#include <linux/atmel-ssc.h>
+
+#define ATMEL_SSC_DMABUF_SIZE (64 * 1024)
+
+/*
+ * Registers and status bits that are required by the PCM driver.
+ */
+struct atmel_pdc_regs {
+ unsigned int xpr; /* PDC recv/trans pointer */
+ unsigned int xcr; /* PDC recv/trans counter */
+ unsigned int xnpr; /* PDC next recv/trans pointer */
+ unsigned int xncr; /* PDC next recv/trans counter */
+ unsigned int ptcr; /* PDC transfer control */
+};
+
+struct atmel_ssc_mask {
+ u32 ssc_enable; /* SSC recv/trans enable */
+ u32 ssc_disable; /* SSC recv/trans disable */
+ u32 ssc_error; /* SSC error conditions */
+ u32 ssc_endx; /* SSC ENDTX or ENDRX */
+ u32 ssc_endbuf; /* SSC TXBUFE or RXBUFF */
+ u32 pdc_enable; /* PDC recv/trans enable */
+ u32 pdc_disable; /* PDC recv/trans disable */
+};
+
+/*
+ * This structure, shared between the PCM driver and the interface,
+ * contains all information required by the PCM driver to perform the
+ * PDC DMA operation. All fields except dma_intr_handler() are initialized
+ * by the interface. The dma_intr_handler() pointer is set by the PCM
+ * driver and called by the interface SSC interrupt handler if it is
+ * non-NULL.
+ */
+struct atmel_pcm_dma_params {
+ char *name; /* stream identifier */
+ int pdc_xfer_size; /* PDC counter increment in bytes */
+ struct ssc_device *ssc; /* SSC device for stream */
+ struct atmel_pdc_regs *pdc; /* PDC receive or transmit registers */
+ struct atmel_ssc_mask *mask; /* SSC & PDC status bits */
+ struct snd_pcm_substream *substream;
+ void (*dma_intr_handler)(u32, struct snd_pcm_substream *);
+};
+
+/*
+ * SSC register access (since ssc_writel() / ssc_readl() require literal name)
+ */
+#define ssc_readx(base, reg) (__raw_readl((base) + (reg)))
+#define ssc_writex(base, reg, value) __raw_writel((value), (base) + (reg))
+
+#if defined(CONFIG_SND_ATMEL_SOC_PDC) || \
+ defined(CONFIG_SND_ATMEL_SOC_PDC_MODULE)
+int atmel_pcm_pdc_platform_register(struct device *dev);
+void atmel_pcm_pdc_platform_unregister(struct device *dev);
+#else
+static inline int atmel_pcm_pdc_platform_register(struct device *dev)
+{
+ return 0;
+}
+static inline void atmel_pcm_pdc_platform_unregister(struct device *dev)
+{
+}
+#endif
+
+#if defined(CONFIG_SND_ATMEL_SOC_DMA) || \
+ defined(CONFIG_SND_ATMEL_SOC_DMA_MODULE)
+int atmel_pcm_dma_platform_register(struct device *dev);
+void atmel_pcm_dma_platform_unregister(struct device *dev);
+#else
+static inline int atmel_pcm_dma_platform_register(struct device *dev)
+{
+ return 0;
+}
+static inline void atmel_pcm_dma_platform_unregister(struct device *dev)
+{
+}
+#endif
+
+#endif /* _ATMEL_PCM_H */
diff --git a/kernel/sound/soc/atmel/atmel_ssc_dai.c b/kernel/sound/soc/atmel/atmel_ssc_dai.c
new file mode 100644
index 000000000..841d05946
--- /dev/null
+++ b/kernel/sound/soc/atmel/atmel_ssc_dai.c
@@ -0,0 +1,1004 @@
+/*
+ * atmel_ssc_dai.c -- ALSA SoC ATMEL SSC Audio Layer Platform driver
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Author: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ * ATMEL CORP.
+ *
+ * Based on at91-ssc.c by
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Based on pxa2xx Platform drivers by
+ * Liam Girdwood <lrg@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/atmel_pdc.h>
+
+#include <linux/atmel-ssc.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include "atmel-pcm.h"
+#include "atmel_ssc_dai.h"
+
+
+#define NUM_SSC_DEVICES 3
+
+/*
+ * SSC PDC registers required by the PCM DMA engine.
+ */
+static struct atmel_pdc_regs pdc_tx_reg = {
+ .xpr = ATMEL_PDC_TPR,
+ .xcr = ATMEL_PDC_TCR,
+ .xnpr = ATMEL_PDC_TNPR,
+ .xncr = ATMEL_PDC_TNCR,
+};
+
+static struct atmel_pdc_regs pdc_rx_reg = {
+ .xpr = ATMEL_PDC_RPR,
+ .xcr = ATMEL_PDC_RCR,
+ .xnpr = ATMEL_PDC_RNPR,
+ .xncr = ATMEL_PDC_RNCR,
+};
+
+/*
+ * SSC & PDC status bits for transmit and receive.
+ */
+static struct atmel_ssc_mask ssc_tx_mask = {
+ .ssc_enable = SSC_BIT(CR_TXEN),
+ .ssc_disable = SSC_BIT(CR_TXDIS),
+ .ssc_endx = SSC_BIT(SR_ENDTX),
+ .ssc_endbuf = SSC_BIT(SR_TXBUFE),
+ .ssc_error = SSC_BIT(SR_OVRUN),
+ .pdc_enable = ATMEL_PDC_TXTEN,
+ .pdc_disable = ATMEL_PDC_TXTDIS,
+};
+
+static struct atmel_ssc_mask ssc_rx_mask = {
+ .ssc_enable = SSC_BIT(CR_RXEN),
+ .ssc_disable = SSC_BIT(CR_RXDIS),
+ .ssc_endx = SSC_BIT(SR_ENDRX),
+ .ssc_endbuf = SSC_BIT(SR_RXBUFF),
+ .ssc_error = SSC_BIT(SR_OVRUN),
+ .pdc_enable = ATMEL_PDC_RXTEN,
+ .pdc_disable = ATMEL_PDC_RXTDIS,
+};
+
+
+/*
+ * DMA parameters.
+ */
+static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = {
+ {{
+ .name = "SSC0 PCM out",
+ .pdc = &pdc_tx_reg,
+ .mask = &ssc_tx_mask,
+ },
+ {
+ .name = "SSC0 PCM in",
+ .pdc = &pdc_rx_reg,
+ .mask = &ssc_rx_mask,
+ } },
+ {{
+ .name = "SSC1 PCM out",
+ .pdc = &pdc_tx_reg,
+ .mask = &ssc_tx_mask,
+ },
+ {
+ .name = "SSC1 PCM in",
+ .pdc = &pdc_rx_reg,
+ .mask = &ssc_rx_mask,
+ } },
+ {{
+ .name = "SSC2 PCM out",
+ .pdc = &pdc_tx_reg,
+ .mask = &ssc_tx_mask,
+ },
+ {
+ .name = "SSC2 PCM in",
+ .pdc = &pdc_rx_reg,
+ .mask = &ssc_rx_mask,
+ } },
+};
+
+
+static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = {
+ {
+ .name = "ssc0",
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock),
+ .dir_mask = SSC_DIR_MASK_UNUSED,
+ .initialized = 0,
+ },
+ {
+ .name = "ssc1",
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock),
+ .dir_mask = SSC_DIR_MASK_UNUSED,
+ .initialized = 0,
+ },
+ {
+ .name = "ssc2",
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock),
+ .dir_mask = SSC_DIR_MASK_UNUSED,
+ .initialized = 0,
+ },
+};
+
+
+/*
+ * SSC interrupt handler. Passes PDC interrupts to the DMA
+ * interrupt handler in the PCM driver.
+ */
+static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id)
+{
+ struct atmel_ssc_info *ssc_p = dev_id;
+ struct atmel_pcm_dma_params *dma_params;
+ u32 ssc_sr;
+ u32 ssc_substream_mask;
+ int i;
+
+ ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR)
+ & (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR);
+
+ /*
+ * Loop through the substreams attached to this SSC. If
+ * a DMA-related interrupt occurred on that substream, call
+ * the DMA interrupt handler function, if one has been
+ * registered in the dma_params structure by the PCM driver.
+ */
+ for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) {
+ dma_params = ssc_p->dma_params[i];
+
+ if ((dma_params != NULL) &&
+ (dma_params->dma_intr_handler != NULL)) {
+ ssc_substream_mask = (dma_params->mask->ssc_endx |
+ dma_params->mask->ssc_endbuf);
+ if (ssc_sr & ssc_substream_mask) {
+ dma_params->dma_intr_handler(ssc_sr,
+ dma_params->
+ substream);
+ }
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * When the bit clock is input, limit the maximum rate according to the
+ * Serial Clock Ratio Considerations section from the SSC documentation:
+ *
+ * The Transmitter and the Receiver can be programmed to operate
+ * with the clock signals provided on either the TK or RK pins.
+ * This allows the SSC to support many slave-mode data transfers.
+ * In this case, the maximum clock speed allowed on the RK pin is:
+ * - Peripheral clock divided by 2 if Receiver Frame Synchro is input
+ * - Peripheral clock divided by 3 if Receiver Frame Synchro is output
+ * In addition, the maximum clock speed allowed on the TK pin is:
+ * - Peripheral clock divided by 6 if Transmit Frame Synchro is input
+ * - Peripheral clock divided by 2 if Transmit Frame Synchro is output
+ *
+ * When the bit clock is output, limit the rate according to the
+ * SSC divider restrictions.
+ */
+static int atmel_ssc_hw_rule_rate(struct snd_pcm_hw_params *params,
+ struct snd_pcm_hw_rule *rule)
+{
+ struct atmel_ssc_info *ssc_p = rule->private;
+ struct ssc_device *ssc = ssc_p->ssc;
+ struct snd_interval *i = hw_param_interval(params, rule->var);
+ struct snd_interval t;
+ struct snd_ratnum r = {
+ .den_min = 1,
+ .den_max = 4095,
+ .den_step = 1,
+ };
+ unsigned int num = 0, den = 0;
+ int frame_size;
+ int mck_div = 2;
+ int ret;
+
+ frame_size = snd_soc_params_to_frame_size(params);
+ if (frame_size < 0)
+ return frame_size;
+
+ switch (ssc_p->daifmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBM_CFS:
+ if ((ssc_p->dir_mask & SSC_DIR_MASK_CAPTURE)
+ && ssc->clk_from_rk_pin)
+ /* Receiver Frame Synchro (i.e. capture)
+ * is output (format is _CFS) and the RK pin
+ * is used for input (format is _CBM_).
+ */
+ mck_div = 3;
+ break;
+
+ case SND_SOC_DAIFMT_CBM_CFM:
+ if ((ssc_p->dir_mask & SSC_DIR_MASK_PLAYBACK)
+ && !ssc->clk_from_rk_pin)
+ /* Transmit Frame Synchro (i.e. playback)
+ * is input (format is _CFM) and the TK pin
+ * is used for input (format _CBM_ but not
+ * using the RK pin).
+ */
+ mck_div = 6;
+ break;
+ }
+
+ switch (ssc_p->daifmt & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ r.num = ssc_p->mck_rate / mck_div / frame_size;
+
+ ret = snd_interval_ratnum(i, 1, &r, &num, &den);
+ if (ret >= 0 && den && rule->var == SNDRV_PCM_HW_PARAM_RATE) {
+ params->rate_num = num;
+ params->rate_den = den;
+ }
+ break;
+
+ case SND_SOC_DAIFMT_CBM_CFS:
+ case SND_SOC_DAIFMT_CBM_CFM:
+ t.min = 8000;
+ t.max = ssc_p->mck_rate / mck_div / frame_size;
+ t.openmin = t.openmax = 0;
+ t.integer = 0;
+ ret = snd_interval_refine(i, &t);
+ break;
+
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+/*-------------------------------------------------------------------------*\
+ * DAI functions
+\*-------------------------------------------------------------------------*/
+/*
+ * Startup. Only that one substream allowed in each direction.
+ */
+static int atmel_ssc_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct atmel_ssc_info *ssc_p = &ssc_info[dai->id];
+ struct atmel_pcm_dma_params *dma_params;
+ int dir, dir_mask;
+ int ret;
+
+ pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n",
+ ssc_readl(ssc_p->ssc->regs, SR));
+
+ /* Enable PMC peripheral clock for this SSC */
+ pr_debug("atmel_ssc_dai: Starting clock\n");
+ clk_enable(ssc_p->ssc->clk);
+ ssc_p->mck_rate = clk_get_rate(ssc_p->ssc->clk);
+
+ /* Reset the SSC to keep it at a clean status */
+ ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ dir = 0;
+ dir_mask = SSC_DIR_MASK_PLAYBACK;
+ } else {
+ dir = 1;
+ dir_mask = SSC_DIR_MASK_CAPTURE;
+ }
+
+ ret = snd_pcm_hw_rule_add(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_RATE,
+ atmel_ssc_hw_rule_rate,
+ ssc_p,
+ SNDRV_PCM_HW_PARAM_FRAME_BITS,
+ SNDRV_PCM_HW_PARAM_CHANNELS, -1);
+ if (ret < 0) {
+ dev_err(dai->dev, "Failed to specify rate rule: %d\n", ret);
+ return ret;
+ }
+
+ dma_params = &ssc_dma_params[dai->id][dir];
+ dma_params->ssc = ssc_p->ssc;
+ dma_params->substream = substream;
+
+ ssc_p->dma_params[dir] = dma_params;
+
+ snd_soc_dai_set_dma_data(dai, substream, dma_params);
+
+ spin_lock_irq(&ssc_p->lock);
+ if (ssc_p->dir_mask & dir_mask) {
+ spin_unlock_irq(&ssc_p->lock);
+ return -EBUSY;
+ }
+ ssc_p->dir_mask |= dir_mask;
+ spin_unlock_irq(&ssc_p->lock);
+
+ return 0;
+}
+
+/*
+ * Shutdown. Clear DMA parameters and shutdown the SSC if there
+ * are no other substreams open.
+ */
+static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct atmel_ssc_info *ssc_p = &ssc_info[dai->id];
+ struct atmel_pcm_dma_params *dma_params;
+ int dir, dir_mask;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir = 0;
+ else
+ dir = 1;
+
+ dma_params = ssc_p->dma_params[dir];
+
+ if (dma_params != NULL) {
+ dma_params->ssc = NULL;
+ dma_params->substream = NULL;
+ ssc_p->dma_params[dir] = NULL;
+ }
+
+ dir_mask = 1 << dir;
+
+ spin_lock_irq(&ssc_p->lock);
+ ssc_p->dir_mask &= ~dir_mask;
+ if (!ssc_p->dir_mask) {
+ if (ssc_p->initialized) {
+ free_irq(ssc_p->ssc->irq, ssc_p);
+ ssc_p->initialized = 0;
+ }
+
+ /* Reset the SSC */
+ ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
+ /* Clear the SSC dividers */
+ ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0;
+ }
+ spin_unlock_irq(&ssc_p->lock);
+
+ /* Shutdown the SSC clock. */
+ pr_debug("atmel_ssc_dai: Stopping clock\n");
+ clk_disable(ssc_p->ssc->clk);
+}
+
+
+/*
+ * Record the DAI format for use in hw_params().
+ */
+static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+ unsigned int fmt)
+{
+ struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
+
+ ssc_p->daifmt = fmt;
+ return 0;
+}
+
+/*
+ * Record SSC clock dividers for use in hw_params().
+ */
+static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
+ int div_id, int div)
+{
+ struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
+
+ switch (div_id) {
+ case ATMEL_SSC_CMR_DIV:
+ /*
+ * The same master clock divider is used for both
+ * transmit and receive, so if a value has already
+ * been set, it must match this value.
+ */
+ if (ssc_p->dir_mask !=
+ (SSC_DIR_MASK_PLAYBACK | SSC_DIR_MASK_CAPTURE))
+ ssc_p->cmr_div = div;
+ else if (ssc_p->cmr_div == 0)
+ ssc_p->cmr_div = div;
+ else
+ if (div != ssc_p->cmr_div)
+ return -EBUSY;
+ break;
+
+ case ATMEL_SSC_TCMR_PERIOD:
+ ssc_p->tcmr_period = div;
+ break;
+
+ case ATMEL_SSC_RCMR_PERIOD:
+ ssc_p->rcmr_period = div;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * Configure the SSC.
+ */
+static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ int id = dai->id;
+ struct atmel_ssc_info *ssc_p = &ssc_info[id];
+ struct ssc_device *ssc = ssc_p->ssc;
+ struct atmel_pcm_dma_params *dma_params;
+ int dir, channels, bits;
+ u32 tfmr, rfmr, tcmr, rcmr;
+ int ret;
+ int fslen, fslen_ext;
+
+ /*
+ * Currently, there is only one set of dma params for
+ * each direction. If more are added, this code will
+ * have to be changed to select the proper set.
+ */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir = 0;
+ else
+ dir = 1;
+
+ dma_params = ssc_p->dma_params[dir];
+
+ channels = params_channels(params);
+
+ /*
+ * Determine sample size in bits and the PDC increment.
+ */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S8:
+ bits = 8;
+ dma_params->pdc_xfer_size = 1;
+ break;
+ case SNDRV_PCM_FORMAT_S16_LE:
+ bits = 16;
+ dma_params->pdc_xfer_size = 2;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ bits = 24;
+ dma_params->pdc_xfer_size = 4;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ bits = 32;
+ dma_params->pdc_xfer_size = 4;
+ break;
+ default:
+ printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format");
+ return -EINVAL;
+ }
+
+ /*
+ * Compute SSC register settings.
+ */
+ switch (ssc_p->daifmt
+ & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) {
+
+ case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS:
+ /*
+ * I2S format, SSC provides BCLK and LRC clocks.
+ *
+ * The SSC transmit and receive clocks are generated
+ * from the MCK divider, and the BCLK signal
+ * is output on the SSC TK line.
+ */
+
+ if (bits > 16 && !ssc->pdata->has_fslen_ext) {
+ dev_err(dai->dev,
+ "sample size %d is too large for SSC device\n",
+ bits);
+ return -EINVAL;
+ }
+
+ fslen_ext = (bits - 1) / 16;
+ fslen = (bits - 1) % 16;
+
+ rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
+ | SSC_BF(RCMR_STTDLY, START_DELAY)
+ | SSC_BF(RCMR_START, SSC_START_FALLING_RF)
+ | SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+ | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(RCMR_CKS, SSC_CKS_DIV);
+
+ rfmr = SSC_BF(RFMR_FSLEN_EXT, fslen_ext)
+ | SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE)
+ | SSC_BF(RFMR_FSLEN, fslen)
+ | SSC_BF(RFMR_DATNB, (channels - 1))
+ | SSC_BIT(RFMR_MSBF)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
+ | SSC_BF(TCMR_STTDLY, START_DELAY)
+ | SSC_BF(TCMR_START, SSC_START_FALLING_RF)
+ | SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
+ | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
+ | SSC_BF(TCMR_CKS, SSC_CKS_DIV);
+
+ tfmr = SSC_BF(TFMR_FSLEN_EXT, fslen_ext)
+ | SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE)
+ | SSC_BF(TFMR_FSLEN, fslen)
+ | SSC_BF(TFMR_DATNB, (channels - 1))
+ | SSC_BIT(TFMR_MSBF)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
+ case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM:
+ /* I2S format, CODEC supplies BCLK and LRC clocks. */
+ rcmr = SSC_BF(RCMR_PERIOD, 0)
+ | SSC_BF(RCMR_STTDLY, START_DELAY)
+ | SSC_BF(RCMR_START, SSC_START_FALLING_RF)
+ | SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+ | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+ SSC_CKS_PIN : SSC_CKS_CLOCK);
+
+ rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
+ | SSC_BF(RFMR_FSLEN, 0)
+ | SSC_BF(RFMR_DATNB, (channels - 1))
+ | SSC_BIT(RFMR_MSBF)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, 0)
+ | SSC_BF(TCMR_STTDLY, START_DELAY)
+ | SSC_BF(TCMR_START, SSC_START_FALLING_RF)
+ | SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
+ | SSC_BF(TCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ?
+ SSC_CKS_CLOCK : SSC_CKS_PIN);
+
+ tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE)
+ | SSC_BF(TFMR_FSLEN, 0)
+ | SSC_BF(TFMR_DATNB, (channels - 1))
+ | SSC_BIT(TFMR_MSBF)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
+ case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFS:
+ /* I2S format, CODEC supplies BCLK, SSC supplies LRCLK. */
+ if (bits > 16 && !ssc->pdata->has_fslen_ext) {
+ dev_err(dai->dev,
+ "sample size %d is too large for SSC device\n",
+ bits);
+ return -EINVAL;
+ }
+
+ fslen_ext = (bits - 1) / 16;
+ fslen = (bits - 1) % 16;
+
+ rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
+ | SSC_BF(RCMR_STTDLY, START_DELAY)
+ | SSC_BF(RCMR_START, SSC_START_FALLING_RF)
+ | SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+ | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+ SSC_CKS_PIN : SSC_CKS_CLOCK);
+
+ rfmr = SSC_BF(RFMR_FSLEN_EXT, fslen_ext)
+ | SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE)
+ | SSC_BF(RFMR_FSLEN, fslen)
+ | SSC_BF(RFMR_DATNB, (channels - 1))
+ | SSC_BIT(RFMR_MSBF)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
+ | SSC_BF(TCMR_STTDLY, START_DELAY)
+ | SSC_BF(TCMR_START, SSC_START_FALLING_RF)
+ | SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
+ | SSC_BF(TCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ?
+ SSC_CKS_CLOCK : SSC_CKS_PIN);
+
+ tfmr = SSC_BF(TFMR_FSLEN_EXT, fslen_ext)
+ | SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_NEGATIVE)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE)
+ | SSC_BF(TFMR_FSLEN, fslen)
+ | SSC_BF(TFMR_DATNB, (channels - 1))
+ | SSC_BIT(TFMR_MSBF)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
+ case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS:
+ /*
+ * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks.
+ *
+ * The SSC transmit and receive clocks are generated from the
+ * MCK divider, and the BCLK signal is output
+ * on the SSC TK line.
+ */
+ rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
+ | SSC_BF(RCMR_STTDLY, 1)
+ | SSC_BF(RCMR_START, SSC_START_RISING_RF)
+ | SSC_BF(RCMR_CKI, SSC_CKI_FALLING)
+ | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(RCMR_CKS, SSC_CKS_DIV);
+
+ rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE)
+ | SSC_BF(RFMR_FSLEN, 0)
+ | SSC_BF(RFMR_DATNB, (channels - 1))
+ | SSC_BIT(RFMR_MSBF)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
+ | SSC_BF(TCMR_STTDLY, 1)
+ | SSC_BF(TCMR_START, SSC_START_RISING_RF)
+ | SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
+ | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
+ | SSC_BF(TCMR_CKS, SSC_CKS_DIV);
+
+ tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE)
+ | SSC_BF(TFMR_FSLEN, 0)
+ | SSC_BF(TFMR_DATNB, (channels - 1))
+ | SSC_BIT(TFMR_MSBF)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
+ case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM:
+ /*
+ * DSP/PCM Mode A format, CODEC supplies BCLK and LRC clocks.
+ *
+ * Data is transferred on first BCLK after LRC pulse rising
+ * edge.If stereo, the right channel data is contiguous with
+ * the left channel data.
+ */
+ rcmr = SSC_BF(RCMR_PERIOD, 0)
+ | SSC_BF(RCMR_STTDLY, START_DELAY)
+ | SSC_BF(RCMR_START, SSC_START_RISING_RF)
+ | SSC_BF(RCMR_CKI, SSC_CKI_FALLING)
+ | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+ SSC_CKS_PIN : SSC_CKS_CLOCK);
+
+ rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
+ | SSC_BF(RFMR_FSLEN, 0)
+ | SSC_BF(RFMR_DATNB, (channels - 1))
+ | SSC_BIT(RFMR_MSBF)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, 0)
+ | SSC_BF(TCMR_STTDLY, START_DELAY)
+ | SSC_BF(TCMR_START, SSC_START_RISING_RF)
+ | SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
+ | SSC_BF(TCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+ SSC_CKS_CLOCK : SSC_CKS_PIN);
+
+ tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE)
+ | SSC_BF(TFMR_FSLEN, 0)
+ | SSC_BF(TFMR_DATNB, (channels - 1))
+ | SSC_BIT(TFMR_MSBF)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
+ default:
+ printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n",
+ ssc_p->daifmt);
+ return -EINVAL;
+ }
+ pr_debug("atmel_ssc_hw_params: "
+ "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n",
+ rcmr, rfmr, tcmr, tfmr);
+
+ if (!ssc_p->initialized) {
+ if (!ssc_p->ssc->pdata->use_dma) {
+ ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
+
+ ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
+ }
+
+ ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0,
+ ssc_p->name, ssc_p);
+ if (ret < 0) {
+ printk(KERN_WARNING
+ "atmel_ssc_dai: request_irq failure\n");
+ pr_debug("Atmel_ssc_dai: Stoping clock\n");
+ clk_disable(ssc_p->ssc->clk);
+ return ret;
+ }
+
+ ssc_p->initialized = 1;
+ }
+
+ /* set SSC clock mode register */
+ ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div);
+
+ /* set receive clock mode and format */
+ ssc_writel(ssc_p->ssc->regs, RCMR, rcmr);
+ ssc_writel(ssc_p->ssc->regs, RFMR, rfmr);
+
+ /* set transmit clock mode and format */
+ ssc_writel(ssc_p->ssc->regs, TCMR, tcmr);
+ ssc_writel(ssc_p->ssc->regs, TFMR, tfmr);
+
+ pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n");
+ return 0;
+}
+
+
+static int atmel_ssc_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct atmel_ssc_info *ssc_p = &ssc_info[dai->id];
+ struct atmel_pcm_dma_params *dma_params;
+ int dir;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir = 0;
+ else
+ dir = 1;
+
+ dma_params = ssc_p->dma_params[dir];
+
+ ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
+ ssc_writel(ssc_p->ssc->regs, IDR, dma_params->mask->ssc_error);
+
+ pr_debug("%s enabled SSC_SR=0x%08x\n",
+ dir ? "receive" : "transmit",
+ ssc_readl(ssc_p->ssc->regs, SR));
+ return 0;
+}
+
+static int atmel_ssc_trigger(struct snd_pcm_substream *substream,
+ int cmd, struct snd_soc_dai *dai)
+{
+ struct atmel_ssc_info *ssc_p = &ssc_info[dai->id];
+ struct atmel_pcm_dma_params *dma_params;
+ int dir;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir = 0;
+ else
+ dir = 1;
+
+ dma_params = ssc_p->dma_params[dir];
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable);
+ break;
+ default:
+ ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
+ break;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int atmel_ssc_suspend(struct snd_soc_dai *cpu_dai)
+{
+ struct atmel_ssc_info *ssc_p;
+
+ if (!cpu_dai->active)
+ return 0;
+
+ ssc_p = &ssc_info[cpu_dai->id];
+
+ /* Save the status register before disabling transmit and receive */
+ ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR);
+ ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS));
+
+ /* Save the current interrupt mask, then disable unmasked interrupts */
+ ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR);
+ ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr);
+
+ ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR);
+ ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR);
+ ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR);
+ ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR);
+ ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR);
+
+ return 0;
+}
+
+
+
+static int atmel_ssc_resume(struct snd_soc_dai *cpu_dai)
+{
+ struct atmel_ssc_info *ssc_p;
+ u32 cr;
+
+ if (!cpu_dai->active)
+ return 0;
+
+ ssc_p = &ssc_info[cpu_dai->id];
+
+ /* restore SSC register settings */
+ ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr);
+ ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr);
+ ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr);
+ ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr);
+ ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr);
+
+ /* re-enable interrupts */
+ ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr);
+
+ /* Re-enable receive and transmit as appropriate */
+ cr = 0;
+ cr |=
+ (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0;
+ cr |=
+ (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0;
+ ssc_writel(ssc_p->ssc->regs, CR, cr);
+
+ return 0;
+}
+#else /* CONFIG_PM */
+# define atmel_ssc_suspend NULL
+# define atmel_ssc_resume NULL
+#endif /* CONFIG_PM */
+
+#define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static const struct snd_soc_dai_ops atmel_ssc_dai_ops = {
+ .startup = atmel_ssc_startup,
+ .shutdown = atmel_ssc_shutdown,
+ .prepare = atmel_ssc_prepare,
+ .trigger = atmel_ssc_trigger,
+ .hw_params = atmel_ssc_hw_params,
+ .set_fmt = atmel_ssc_set_dai_fmt,
+ .set_clkdiv = atmel_ssc_set_dai_clkdiv,
+};
+
+static struct snd_soc_dai_driver atmel_ssc_dai = {
+ .suspend = atmel_ssc_suspend,
+ .resume = atmel_ssc_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
+ .rate_min = 8000,
+ .rate_max = 384000,
+ .formats = ATMEL_SSC_FORMATS,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
+ .rate_min = 8000,
+ .rate_max = 384000,
+ .formats = ATMEL_SSC_FORMATS,},
+ .ops = &atmel_ssc_dai_ops,
+};
+
+static const struct snd_soc_component_driver atmel_ssc_component = {
+ .name = "atmel-ssc",
+};
+
+static int asoc_ssc_init(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ssc_device *ssc = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = snd_soc_register_component(dev, &atmel_ssc_component,
+ &atmel_ssc_dai, 1);
+ if (ret) {
+ dev_err(dev, "Could not register DAI: %d\n", ret);
+ goto err;
+ }
+
+ if (ssc->pdata->use_dma)
+ ret = atmel_pcm_dma_platform_register(dev);
+ else
+ ret = atmel_pcm_pdc_platform_register(dev);
+
+ if (ret) {
+ dev_err(dev, "Could not register PCM: %d\n", ret);
+ goto err_unregister_dai;
+ }
+
+ return 0;
+
+err_unregister_dai:
+ snd_soc_unregister_component(dev);
+err:
+ return ret;
+}
+
+static void asoc_ssc_exit(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ssc_device *ssc = platform_get_drvdata(pdev);
+
+ if (ssc->pdata->use_dma)
+ atmel_pcm_dma_platform_unregister(dev);
+ else
+ atmel_pcm_pdc_platform_unregister(dev);
+
+ snd_soc_unregister_component(dev);
+}
+
+/**
+ * atmel_ssc_set_audio - Allocate the specified SSC for audio use.
+ */
+int atmel_ssc_set_audio(int ssc_id)
+{
+ struct ssc_device *ssc;
+ int ret;
+
+ /* If we can grab the SSC briefly to parent the DAI device off it */
+ ssc = ssc_request(ssc_id);
+ if (IS_ERR(ssc)) {
+ pr_err("Unable to parent ASoC SSC DAI on SSC: %ld\n",
+ PTR_ERR(ssc));
+ return PTR_ERR(ssc);
+ } else {
+ ssc_info[ssc_id].ssc = ssc;
+ }
+
+ ret = asoc_ssc_init(&ssc->pdev->dev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(atmel_ssc_set_audio);
+
+void atmel_ssc_put_audio(int ssc_id)
+{
+ struct ssc_device *ssc = ssc_info[ssc_id].ssc;
+
+ asoc_ssc_exit(&ssc->pdev->dev);
+ ssc_free(ssc);
+}
+EXPORT_SYMBOL_GPL(atmel_ssc_put_audio);
+
+/* Module information */
+MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou@atmel.com, www.atmel.com");
+MODULE_DESCRIPTION("ATMEL SSC ASoC Interface");
+MODULE_LICENSE("GPL");
diff --git a/kernel/sound/soc/atmel/atmel_ssc_dai.h b/kernel/sound/soc/atmel/atmel_ssc_dai.h
new file mode 100644
index 000000000..80b153857
--- /dev/null
+++ b/kernel/sound/soc/atmel/atmel_ssc_dai.h
@@ -0,0 +1,124 @@
+/*
+ * atmel_ssc_dai.h - ALSA SSC interface for the Atmel SoC
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Author: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ * ATMEL CORP.
+ *
+ * Based on at91-ssc.c by
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Based on pxa2xx Platform drivers by
+ * Liam Girdwood <lrg@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ATMEL_SSC_DAI_H
+#define _ATMEL_SSC_DAI_H
+
+#include <linux/types.h>
+#include <linux/atmel-ssc.h>
+
+#include "atmel-pcm.h"
+
+/* SSC system clock ids */
+#define ATMEL_SYSCLK_MCK 0 /* SSC uses AT91 MCK as system clock */
+
+/* SSC divider ids */
+#define ATMEL_SSC_CMR_DIV 0 /* MCK divider for BCLK */
+#define ATMEL_SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */
+#define ATMEL_SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */
+/*
+ * SSC direction masks
+ */
+#define SSC_DIR_MASK_UNUSED 0
+#define SSC_DIR_MASK_PLAYBACK 1
+#define SSC_DIR_MASK_CAPTURE 2
+
+/*
+ * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These
+ * are expected to be used with SSC_BF
+ */
+/* START bit field values */
+#define SSC_START_CONTINUOUS 0
+#define SSC_START_TX_RX 1
+#define SSC_START_LOW_RF 2
+#define SSC_START_HIGH_RF 3
+#define SSC_START_FALLING_RF 4
+#define SSC_START_RISING_RF 5
+#define SSC_START_LEVEL_RF 6
+#define SSC_START_EDGE_RF 7
+#define SSS_START_COMPARE_0 8
+
+/* CKI bit field values */
+#define SSC_CKI_FALLING 0
+#define SSC_CKI_RISING 1
+
+/* CKO bit field values */
+#define SSC_CKO_NONE 0
+#define SSC_CKO_CONTINUOUS 1
+#define SSC_CKO_TRANSFER 2
+
+/* CKS bit field values */
+#define SSC_CKS_DIV 0
+#define SSC_CKS_CLOCK 1
+#define SSC_CKS_PIN 2
+
+/* FSEDGE bit field values */
+#define SSC_FSEDGE_POSITIVE 0
+#define SSC_FSEDGE_NEGATIVE 1
+
+/* FSOS bit field values */
+#define SSC_FSOS_NONE 0
+#define SSC_FSOS_NEGATIVE 1
+#define SSC_FSOS_POSITIVE 2
+#define SSC_FSOS_LOW 3
+#define SSC_FSOS_HIGH 4
+#define SSC_FSOS_TOGGLE 5
+
+#define START_DELAY 1
+
+struct atmel_ssc_state {
+ u32 ssc_cmr;
+ u32 ssc_rcmr;
+ u32 ssc_rfmr;
+ u32 ssc_tcmr;
+ u32 ssc_tfmr;
+ u32 ssc_sr;
+ u32 ssc_imr;
+};
+
+
+struct atmel_ssc_info {
+ char *name;
+ struct ssc_device *ssc;
+ spinlock_t lock; /* lock for dir_mask */
+ unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */
+ unsigned short initialized; /* true if SSC has been initialized */
+ unsigned short daifmt;
+ unsigned short cmr_div;
+ unsigned short tcmr_period;
+ unsigned short rcmr_period;
+ struct atmel_pcm_dma_params *dma_params[2];
+ struct atmel_ssc_state ssc_state;
+ unsigned long mck_rate;
+};
+
+int atmel_ssc_set_audio(int ssc_id);
+void atmel_ssc_put_audio(int ssc_id);
+
+#endif /* _AT91_SSC_DAI_H */
diff --git a/kernel/sound/soc/atmel/atmel_wm8904.c b/kernel/sound/soc/atmel/atmel_wm8904.c
new file mode 100644
index 000000000..aa354e1c6
--- /dev/null
+++ b/kernel/sound/soc/atmel/atmel_wm8904.c
@@ -0,0 +1,195 @@
+/*
+ * atmel_wm8904 - Atmel ASoC driver for boards with WM8904 codec.
+ *
+ * Copyright (C) 2012 Atmel
+ *
+ * Author: Bo Shen <voice.shen@atmel.com>
+ *
+ * GPLv2 or later
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include <sound/soc.h>
+
+#include "../codecs/wm8904.h"
+#include "atmel_ssc_dai.h"
+
+static const struct snd_soc_dapm_widget atmel_asoc_wm8904_dapm_widgets[] = {
+ SND_SOC_DAPM_HP("Headphone Jack", NULL),
+ SND_SOC_DAPM_MIC("Mic", NULL),
+ SND_SOC_DAPM_LINE("Line In Jack", NULL),
+};
+
+static int atmel_asoc_wm8904_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ int ret;
+
+ ret = snd_soc_dai_set_pll(codec_dai, WM8904_FLL_MCLK, WM8904_FLL_MCLK,
+ 32768, params_rate(params) * 256);
+ if (ret < 0) {
+ pr_err("%s - failed to set wm8904 codec PLL.", __func__);
+ return ret;
+ }
+
+ /*
+ * As here wm8904 use FLL output as its system clock
+ * so calling set_sysclk won't care freq parameter
+ * then we pass 0
+ */
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8904_CLK_FLL,
+ 0, SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ pr_err("%s -failed to set wm8904 SYSCLK\n", __func__);
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct snd_soc_ops atmel_asoc_wm8904_ops = {
+ .hw_params = atmel_asoc_wm8904_hw_params,
+};
+
+static struct snd_soc_dai_link atmel_asoc_wm8904_dailink = {
+ .name = "WM8904",
+ .stream_name = "WM8904 PCM",
+ .codec_dai_name = "wm8904-hifi",
+ .dai_fmt = SND_SOC_DAIFMT_I2S
+ | SND_SOC_DAIFMT_NB_NF
+ | SND_SOC_DAIFMT_CBM_CFM,
+ .ops = &atmel_asoc_wm8904_ops,
+};
+
+static struct snd_soc_card atmel_asoc_wm8904_card = {
+ .name = "atmel_asoc_wm8904",
+ .owner = THIS_MODULE,
+ .dai_link = &atmel_asoc_wm8904_dailink,
+ .num_links = 1,
+ .dapm_widgets = atmel_asoc_wm8904_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(atmel_asoc_wm8904_dapm_widgets),
+ .fully_routed = true,
+};
+
+static int atmel_asoc_wm8904_dt_init(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *codec_np, *cpu_np;
+ struct snd_soc_card *card = &atmel_asoc_wm8904_card;
+ struct snd_soc_dai_link *dailink = &atmel_asoc_wm8904_dailink;
+ int ret;
+
+ if (!np) {
+ dev_err(&pdev->dev, "only device tree supported\n");
+ return -EINVAL;
+ }
+
+ ret = snd_soc_of_parse_card_name(card, "atmel,model");
+ if (ret) {
+ dev_err(&pdev->dev, "failed to parse card name\n");
+ return ret;
+ }
+
+ ret = snd_soc_of_parse_audio_routing(card, "atmel,audio-routing");
+ if (ret) {
+ dev_err(&pdev->dev, "failed to parse audio routing\n");
+ return ret;
+ }
+
+ cpu_np = of_parse_phandle(np, "atmel,ssc-controller", 0);
+ if (!cpu_np) {
+ dev_err(&pdev->dev, "failed to get dai and pcm info\n");
+ ret = -EINVAL;
+ return ret;
+ }
+ dailink->cpu_of_node = cpu_np;
+ dailink->platform_of_node = cpu_np;
+ of_node_put(cpu_np);
+
+ codec_np = of_parse_phandle(np, "atmel,audio-codec", 0);
+ if (!codec_np) {
+ dev_err(&pdev->dev, "failed to get codec info\n");
+ ret = -EINVAL;
+ return ret;
+ }
+ dailink->codec_of_node = codec_np;
+ of_node_put(codec_np);
+
+ return 0;
+}
+
+static int atmel_asoc_wm8904_probe(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = &atmel_asoc_wm8904_card;
+ struct snd_soc_dai_link *dailink = &atmel_asoc_wm8904_dailink;
+ int id, ret;
+
+ card->dev = &pdev->dev;
+ ret = atmel_asoc_wm8904_dt_init(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to init dt info\n");
+ return ret;
+ }
+
+ id = of_alias_get_id((struct device_node *)dailink->cpu_of_node, "ssc");
+ ret = atmel_ssc_set_audio(id);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "failed to set SSC %d for audio\n", id);
+ return ret;
+ }
+
+ ret = snd_soc_register_card(card);
+ if (ret) {
+ dev_err(&pdev->dev, "snd_soc_register_card failed\n");
+ goto err_set_audio;
+ }
+
+ return 0;
+
+err_set_audio:
+ atmel_ssc_put_audio(id);
+ return ret;
+}
+
+static int atmel_asoc_wm8904_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+ struct snd_soc_dai_link *dailink = &atmel_asoc_wm8904_dailink;
+ int id;
+
+ id = of_alias_get_id((struct device_node *)dailink->cpu_of_node, "ssc");
+
+ snd_soc_unregister_card(card);
+ atmel_ssc_put_audio(id);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id atmel_asoc_wm8904_dt_ids[] = {
+ { .compatible = "atmel,asoc-wm8904", },
+ { }
+};
+#endif
+
+static struct platform_driver atmel_asoc_wm8904_driver = {
+ .driver = {
+ .name = "atmel-wm8904-audio",
+ .of_match_table = of_match_ptr(atmel_asoc_wm8904_dt_ids),
+ },
+ .probe = atmel_asoc_wm8904_probe,
+ .remove = atmel_asoc_wm8904_remove,
+};
+
+module_platform_driver(atmel_asoc_wm8904_driver);
+
+/* Module information */
+MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>");
+MODULE_DESCRIPTION("ALSA SoC machine driver for Atmel EK with WM8904 codec");
+MODULE_LICENSE("GPL");
diff --git a/kernel/sound/soc/atmel/sam9g20_wm8731.c b/kernel/sound/soc/atmel/sam9g20_wm8731.c
new file mode 100644
index 000000000..8de836165
--- /dev/null
+++ b/kernel/sound/soc/atmel/sam9g20_wm8731.c
@@ -0,0 +1,291 @@
+/*
+ * sam9g20_wm8731 -- SoC audio for AT91SAM9G20-based
+ * ATMEL AT91SAM9G20ek board.
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Authors: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ *
+ * Based on ati_b1_wm8731.c by:
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Copyright 2006 Endrelia Technologies Inc.
+ * Based on corgi.c by:
+ * Copyright 2005 Wolfson Microelectronics PLC.
+ * Copyright 2005 Openedhand Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/of.h>
+
+#include <linux/atmel-ssc.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include "../codecs/wm8731.h"
+#include "atmel-pcm.h"
+#include "atmel_ssc_dai.h"
+
+#define MCLK_RATE 12000000
+
+/*
+ * As shipped the board does not have inputs. However, it is relatively
+ * straightforward to modify the board to hook them up so support is left
+ * in the driver.
+ */
+#undef ENABLE_MIC_INPUT
+
+static struct clk *mclk;
+
+static int at91sam9g20ek_set_bias_level(struct snd_soc_card *card,
+ struct snd_soc_dapm_context *dapm,
+ enum snd_soc_bias_level level)
+{
+ static int mclk_on;
+ int ret = 0;
+
+ switch (level) {
+ case SND_SOC_BIAS_ON:
+ case SND_SOC_BIAS_PREPARE:
+ if (!mclk_on)
+ ret = clk_enable(mclk);
+ if (ret == 0)
+ mclk_on = 1;
+ break;
+
+ case SND_SOC_BIAS_OFF:
+ case SND_SOC_BIAS_STANDBY:
+ if (mclk_on)
+ clk_disable(mclk);
+ mclk_on = 0;
+ break;
+ }
+
+ return ret;
+}
+
+static const struct snd_soc_dapm_widget at91sam9g20ek_dapm_widgets[] = {
+ SND_SOC_DAPM_MIC("Int Mic", NULL),
+ SND_SOC_DAPM_SPK("Ext Spk", NULL),
+};
+
+static const struct snd_soc_dapm_route intercon[] = {
+
+ /* speaker connected to LHPOUT */
+ {"Ext Spk", NULL, "LHPOUT"},
+
+ /* mic is connected to Mic Jack, with WM8731 Mic Bias */
+ {"MICIN", NULL, "Mic Bias"},
+ {"Mic Bias", NULL, "Int Mic"},
+};
+
+/*
+ * Logic for a wm8731 as connected on a at91sam9g20ek board.
+ */
+static int at91sam9g20ek_wm8731_init(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_soc_codec *codec = rtd->codec;
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ struct snd_soc_dapm_context *dapm = &codec->dapm;
+ int ret;
+
+ printk(KERN_DEBUG
+ "at91sam9g20ek_wm8731 "
+ ": at91sam9g20ek_wm8731_init() called\n");
+
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_MCLK,
+ MCLK_RATE, SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to set WM8731 SYSCLK: %d\n", ret);
+ return ret;
+ }
+
+ /* not connected */
+ snd_soc_dapm_nc_pin(dapm, "RLINEIN");
+ snd_soc_dapm_nc_pin(dapm, "LLINEIN");
+
+#ifndef ENABLE_MIC_INPUT
+ snd_soc_dapm_nc_pin(&rtd->card->dapm, "Int Mic");
+#endif
+
+ return 0;
+}
+
+static struct snd_soc_dai_link at91sam9g20ek_dai = {
+ .name = "WM8731",
+ .stream_name = "WM8731 PCM",
+ .cpu_dai_name = "at91rm9200_ssc.0",
+ .codec_dai_name = "wm8731-hifi",
+ .init = at91sam9g20ek_wm8731_init,
+ .platform_name = "at91rm9200_ssc.0",
+ .codec_name = "wm8731.0-001b",
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBM_CFM,
+};
+
+static struct snd_soc_card snd_soc_at91sam9g20ek = {
+ .name = "AT91SAMG20-EK",
+ .owner = THIS_MODULE,
+ .dai_link = &at91sam9g20ek_dai,
+ .num_links = 1,
+ .set_bias_level = at91sam9g20ek_set_bias_level,
+
+ .dapm_widgets = at91sam9g20ek_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(at91sam9g20ek_dapm_widgets),
+ .dapm_routes = intercon,
+ .num_dapm_routes = ARRAY_SIZE(intercon),
+};
+
+static int at91sam9g20ek_audio_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *codec_np, *cpu_np;
+ struct clk *pllb;
+ struct snd_soc_card *card = &snd_soc_at91sam9g20ek;
+ int ret;
+
+ if (!np) {
+ return -ENODEV;
+ }
+
+ ret = atmel_ssc_set_audio(0);
+ if (ret) {
+ dev_err(&pdev->dev, "ssc channel is not valid\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Codec MCLK is supplied by PCK0 - set it up.
+ */
+ mclk = clk_get(NULL, "pck0");
+ if (IS_ERR(mclk)) {
+ printk(KERN_ERR "ASoC: Failed to get MCLK\n");
+ ret = PTR_ERR(mclk);
+ goto err;
+ }
+
+ pllb = clk_get(NULL, "pllb");
+ if (IS_ERR(pllb)) {
+ printk(KERN_ERR "ASoC: Failed to get PLLB\n");
+ ret = PTR_ERR(pllb);
+ goto err_mclk;
+ }
+ ret = clk_set_parent(mclk, pllb);
+ clk_put(pllb);
+ if (ret != 0) {
+ printk(KERN_ERR "ASoC: Failed to set MCLK parent\n");
+ goto err_mclk;
+ }
+
+ clk_set_rate(mclk, MCLK_RATE);
+
+ card->dev = &pdev->dev;
+
+ /* Parse device node info */
+ ret = snd_soc_of_parse_card_name(card, "atmel,model");
+ if (ret)
+ goto err;
+
+ ret = snd_soc_of_parse_audio_routing(card,
+ "atmel,audio-routing");
+ if (ret)
+ goto err;
+
+ /* Parse codec info */
+ at91sam9g20ek_dai.codec_name = NULL;
+ codec_np = of_parse_phandle(np, "atmel,audio-codec", 0);
+ if (!codec_np) {
+ dev_err(&pdev->dev, "codec info missing\n");
+ return -EINVAL;
+ }
+ at91sam9g20ek_dai.codec_of_node = codec_np;
+
+ /* Parse dai and platform info */
+ at91sam9g20ek_dai.cpu_dai_name = NULL;
+ at91sam9g20ek_dai.platform_name = NULL;
+ cpu_np = of_parse_phandle(np, "atmel,ssc-controller", 0);
+ if (!cpu_np) {
+ dev_err(&pdev->dev, "dai and pcm info missing\n");
+ return -EINVAL;
+ }
+ at91sam9g20ek_dai.cpu_of_node = cpu_np;
+ at91sam9g20ek_dai.platform_of_node = cpu_np;
+
+ of_node_put(codec_np);
+ of_node_put(cpu_np);
+
+ ret = snd_soc_register_card(card);
+ if (ret) {
+ printk(KERN_ERR "ASoC: snd_soc_register_card() failed\n");
+ }
+
+ return ret;
+
+err_mclk:
+ clk_put(mclk);
+ mclk = NULL;
+err:
+ atmel_ssc_put_audio(0);
+ return ret;
+}
+
+static int at91sam9g20ek_audio_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+ clk_disable(mclk);
+ mclk = NULL;
+ snd_soc_unregister_card(card);
+ atmel_ssc_put_audio(0);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id at91sam9g20ek_wm8731_dt_ids[] = {
+ { .compatible = "atmel,at91sam9g20ek-wm8731-audio", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, at91sam9g20ek_wm8731_dt_ids);
+#endif
+
+static struct platform_driver at91sam9g20ek_audio_driver = {
+ .driver = {
+ .name = "at91sam9g20ek-audio",
+ .of_match_table = of_match_ptr(at91sam9g20ek_wm8731_dt_ids),
+ },
+ .probe = at91sam9g20ek_audio_probe,
+ .remove = at91sam9g20ek_audio_remove,
+};
+
+module_platform_driver(at91sam9g20ek_audio_driver);
+
+/* Module information */
+MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou@atmel.com>");
+MODULE_DESCRIPTION("ALSA SoC AT91SAM9G20EK_WM8731");
+MODULE_ALIAS("platform:at91sam9g20ek-audio");
+MODULE_LICENSE("GPL");
diff --git a/kernel/sound/soc/atmel/sam9x5_wm8731.c b/kernel/sound/soc/atmel/sam9x5_wm8731.c
new file mode 100644
index 000000000..ccdf547f4
--- /dev/null
+++ b/kernel/sound/soc/atmel/sam9x5_wm8731.c
@@ -0,0 +1,207 @@
+/*
+ * sam9x5_wm8731 -- SoC audio for AT91SAM9X5-based boards
+ * that are using WM8731 as codec.
+ *
+ * Copyright (C) 2011 Atmel,
+ * Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Copyright (C) 2013 Paratronic,
+ * Richard Genoud <richard.genoud@gmail.com>
+ *
+ * Based on sam9g20_wm8731.c by:
+ * Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/of.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+#include <sound/soc-dapm.h>
+
+#include "../codecs/wm8731.h"
+#include "atmel_ssc_dai.h"
+
+
+#define MCLK_RATE 12288000
+
+#define DRV_NAME "sam9x5-snd-wm8731"
+
+struct sam9x5_drvdata {
+ int ssc_id;
+};
+
+/*
+ * Logic for a wm8731 as connected on a at91sam9x5ek based board.
+ */
+static int sam9x5_wm8731_init(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ struct device *dev = rtd->dev;
+ int ret;
+
+ dev_dbg(dev, "ASoC: %s called\n", __func__);
+
+ /* set the codec system clock for DAC and ADC */
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL,
+ MCLK_RATE, SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ dev_err(dev, "ASoC: Failed to set WM8731 SYSCLK: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * Audio paths on at91sam9x5ek board:
+ *
+ * |A| ------------> | | ---R----> Headphone Jack
+ * |T| <----\ | WM | ---L--/
+ * |9| ---> CLK <--> | 8731 | <--R----- Line In Jack
+ * |1| <------------ | | <--L--/
+ */
+static const struct snd_soc_dapm_widget sam9x5_dapm_widgets[] = {
+ SND_SOC_DAPM_HP("Headphone Jack", NULL),
+ SND_SOC_DAPM_LINE("Line In Jack", NULL),
+};
+
+static int sam9x5_wm8731_driver_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *codec_np, *cpu_np;
+ struct snd_soc_card *card;
+ struct snd_soc_dai_link *dai;
+ struct sam9x5_drvdata *priv;
+ int ret;
+
+ if (!np) {
+ dev_err(&pdev->dev, "No device node supplied\n");
+ return -EINVAL;
+ }
+
+ card = devm_kzalloc(&pdev->dev, sizeof(*card), GFP_KERNEL);
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ dai = devm_kzalloc(&pdev->dev, sizeof(*dai), GFP_KERNEL);
+ if (!dai || !card || !priv) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ snd_soc_card_set_drvdata(card, priv);
+
+ card->dev = &pdev->dev;
+ card->owner = THIS_MODULE;
+ card->dai_link = dai;
+ card->num_links = 1;
+ card->dapm_widgets = sam9x5_dapm_widgets;
+ card->num_dapm_widgets = ARRAY_SIZE(sam9x5_dapm_widgets);
+ dai->name = "WM8731";
+ dai->stream_name = "WM8731 PCM";
+ dai->codec_dai_name = "wm8731-hifi";
+ dai->init = sam9x5_wm8731_init;
+ dai->dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF
+ | SND_SOC_DAIFMT_CBM_CFM;
+
+ ret = snd_soc_of_parse_card_name(card, "atmel,model");
+ if (ret) {
+ dev_err(&pdev->dev, "atmel,model node missing\n");
+ goto out;
+ }
+
+ ret = snd_soc_of_parse_audio_routing(card, "atmel,audio-routing");
+ if (ret) {
+ dev_err(&pdev->dev, "atmel,audio-routing node missing\n");
+ goto out;
+ }
+
+ codec_np = of_parse_phandle(np, "atmel,audio-codec", 0);
+ if (!codec_np) {
+ dev_err(&pdev->dev, "atmel,audio-codec node missing\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ dai->codec_of_node = codec_np;
+
+ cpu_np = of_parse_phandle(np, "atmel,ssc-controller", 0);
+ if (!cpu_np) {
+ dev_err(&pdev->dev, "atmel,ssc-controller node missing\n");
+ ret = -EINVAL;
+ goto out;
+ }
+ dai->cpu_of_node = cpu_np;
+ dai->platform_of_node = cpu_np;
+
+ priv->ssc_id = of_alias_get_id(cpu_np, "ssc");
+
+ ret = atmel_ssc_set_audio(priv->ssc_id);
+ if (ret != 0) {
+ dev_err(&pdev->dev,
+ "ASoC: Failed to set SSC %d for audio: %d\n",
+ ret, priv->ssc_id);
+ goto out;
+ }
+
+ of_node_put(codec_np);
+ of_node_put(cpu_np);
+
+ ret = snd_soc_register_card(card);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "ASoC: Platform device allocation failed\n");
+ goto out_put_audio;
+ }
+
+ dev_dbg(&pdev->dev, "ASoC: %s ok\n", __func__);
+
+ return ret;
+
+out_put_audio:
+ atmel_ssc_put_audio(priv->ssc_id);
+out:
+ return ret;
+}
+
+static int sam9x5_wm8731_driver_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+ struct sam9x5_drvdata *priv = card->drvdata;
+
+ snd_soc_unregister_card(card);
+ atmel_ssc_put_audio(priv->ssc_id);
+
+ return 0;
+}
+
+static const struct of_device_id sam9x5_wm8731_of_match[] = {
+ { .compatible = "atmel,sam9x5-wm8731-audio", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sam9x5_wm8731_of_match);
+
+static struct platform_driver sam9x5_wm8731_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = of_match_ptr(sam9x5_wm8731_of_match),
+ },
+ .probe = sam9x5_wm8731_driver_probe,
+ .remove = sam9x5_wm8731_driver_remove,
+};
+module_platform_driver(sam9x5_wm8731_driver);
+
+/* Module information */
+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
+MODULE_AUTHOR("Richard Genoud <richard.genoud@gmail.com>");
+MODULE_DESCRIPTION("ALSA SoC machine driver for AT91SAM9x5 - WM8731");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);