diff options
Diffstat (limited to 'kernel/sound/pci/echoaudio/echoaudio_3g.c')
| -rw-r--r-- | kernel/sound/pci/echoaudio/echoaudio_3g.c | 431 |
1 files changed, 431 insertions, 0 deletions
diff --git a/kernel/sound/pci/echoaudio/echoaudio_3g.c b/kernel/sound/pci/echoaudio/echoaudio_3g.c new file mode 100644 index 000000000..2fa66dc3e --- /dev/null +++ b/kernel/sound/pci/echoaudio/echoaudio_3g.c @@ -0,0 +1,431 @@ +/**************************************************************************** + + Copyright Echo Digital Audio Corporation (c) 1998 - 2004 + All rights reserved + www.echoaudio.com + + This file is part of Echo Digital Audio's generic driver library. + + Echo Digital Audio's generic driver library is free software; + you can redistribute it and/or modify it under the terms of + the GNU General Public License as published by the Free Software + Foundation. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, Boston, + MA 02111-1307, USA. + + ************************************************************************* + + Translation from C++ and adaptation for use in ALSA-Driver + were made by Giuliano Pochini <pochini@shiny.it> + +****************************************************************************/ + + + +/* These functions are common for all "3G" cards */ + + +static int check_asic_status(struct echoaudio *chip) +{ + u32 box_status; + + if (wait_handshake(chip)) + return -EIO; + + chip->comm_page->ext_box_status = cpu_to_le32(E3G_ASIC_NOT_LOADED); + chip->asic_loaded = FALSE; + clear_handshake(chip); + send_vector(chip, DSP_VC_TEST_ASIC); + + if (wait_handshake(chip)) { + chip->dsp_code = NULL; + return -EIO; + } + + box_status = le32_to_cpu(chip->comm_page->ext_box_status); + dev_dbg(chip->card->dev, "box_status=%x\n", box_status); + if (box_status == E3G_ASIC_NOT_LOADED) + return -ENODEV; + + chip->asic_loaded = TRUE; + return box_status & E3G_BOX_TYPE_MASK; +} + + + +static inline u32 get_frq_reg(struct echoaudio *chip) +{ + return le32_to_cpu(chip->comm_page->e3g_frq_register); +} + + + +/* Most configuration of 3G cards is accomplished by writing the control +register. write_control_reg sends the new control register value to the DSP. */ +static int write_control_reg(struct echoaudio *chip, u32 ctl, u32 frq, + char force) +{ + if (wait_handshake(chip)) + return -EIO; + + dev_dbg(chip->card->dev, + "WriteControlReg: Setting 0x%x, 0x%x\n", ctl, frq); + + ctl = cpu_to_le32(ctl); + frq = cpu_to_le32(frq); + + if (ctl != chip->comm_page->control_register || + frq != chip->comm_page->e3g_frq_register || force) { + chip->comm_page->e3g_frq_register = frq; + chip->comm_page->control_register = ctl; + clear_handshake(chip); + return send_vector(chip, DSP_VC_WRITE_CONTROL_REG); + } + + dev_dbg(chip->card->dev, "WriteControlReg: not written, no change\n"); + return 0; +} + + + +/* Set the digital mode - currently for Gina24, Layla24, Mona, 3G */ +static int set_digital_mode(struct echoaudio *chip, u8 mode) +{ + u8 previous_mode; + int err, i, o; + + /* All audio channels must be closed before changing the digital mode */ + if (snd_BUG_ON(chip->pipe_alloc_mask)) + return -EAGAIN; + + if (snd_BUG_ON(!(chip->digital_modes & (1 << mode)))) + return -EINVAL; + + previous_mode = chip->digital_mode; + err = dsp_set_digital_mode(chip, mode); + + /* If we successfully changed the digital mode from or to ADAT, + * then make sure all output, input and monitor levels are + * updated by the DSP comm object. */ + if (err >= 0 && previous_mode != mode && + (previous_mode == DIGITAL_MODE_ADAT || mode == DIGITAL_MODE_ADAT)) { + spin_lock_irq(&chip->lock); + for (o = 0; o < num_busses_out(chip); o++) + for (i = 0; i < num_busses_in(chip); i++) + set_monitor_gain(chip, o, i, + chip->monitor_gain[o][i]); + +#ifdef ECHOCARD_HAS_INPUT_GAIN + for (i = 0; i < num_busses_in(chip); i++) + set_input_gain(chip, i, chip->input_gain[i]); + update_input_line_level(chip); +#endif + + for (o = 0; o < num_busses_out(chip); o++) + set_output_gain(chip, o, chip->output_gain[o]); + update_output_line_level(chip); + spin_unlock_irq(&chip->lock); + } + + return err; +} + + + +static u32 set_spdif_bits(struct echoaudio *chip, u32 control_reg, u32 rate) +{ + control_reg &= E3G_SPDIF_FORMAT_CLEAR_MASK; + + switch (rate) { + case 32000 : + control_reg |= E3G_SPDIF_SAMPLE_RATE0 | E3G_SPDIF_SAMPLE_RATE1; + break; + case 44100 : + if (chip->professional_spdif) + control_reg |= E3G_SPDIF_SAMPLE_RATE0; + break; + case 48000 : + control_reg |= E3G_SPDIF_SAMPLE_RATE1; + break; + } + + if (chip->professional_spdif) + control_reg |= E3G_SPDIF_PRO_MODE; + + if (chip->non_audio_spdif) + control_reg |= E3G_SPDIF_NOT_AUDIO; + + control_reg |= E3G_SPDIF_24_BIT | E3G_SPDIF_TWO_CHANNEL | + E3G_SPDIF_COPY_PERMIT; + + return control_reg; +} + + + +/* Set the S/PDIF output format */ +static int set_professional_spdif(struct echoaudio *chip, char prof) +{ + u32 control_reg; + + control_reg = le32_to_cpu(chip->comm_page->control_register); + chip->professional_spdif = prof; + control_reg = set_spdif_bits(chip, control_reg, chip->sample_rate); + return write_control_reg(chip, control_reg, get_frq_reg(chip), 0); +} + + + +/* detect_input_clocks() returns a bitmask consisting of all the input clocks +currently connected to the hardware; this changes as the user connects and +disconnects clock inputs. You should use this information to determine which +clocks the user is allowed to select. */ +static u32 detect_input_clocks(const struct echoaudio *chip) +{ + u32 clocks_from_dsp, clock_bits; + + /* Map the DSP clock detect bits to the generic driver clock + * detect bits */ + clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks); + + clock_bits = ECHO_CLOCK_BIT_INTERNAL; + + if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_WORD) + clock_bits |= ECHO_CLOCK_BIT_WORD; + + switch(chip->digital_mode) { + case DIGITAL_MODE_SPDIF_RCA: + case DIGITAL_MODE_SPDIF_OPTICAL: + if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_SPDIF) + clock_bits |= ECHO_CLOCK_BIT_SPDIF; + break; + case DIGITAL_MODE_ADAT: + if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_ADAT) + clock_bits |= ECHO_CLOCK_BIT_ADAT; + break; + } + + return clock_bits; +} + + + +static int load_asic(struct echoaudio *chip) +{ + int box_type, err; + + if (chip->asic_loaded) + return 0; + + /* Give the DSP a few milliseconds to settle down */ + mdelay(2); + + err = load_asic_generic(chip, DSP_FNC_LOAD_3G_ASIC, FW_3G_ASIC); + if (err < 0) + return err; + + chip->asic_code = FW_3G_ASIC; + + /* Now give the new ASIC some time to set up */ + msleep(1000); + /* See if it worked */ + box_type = check_asic_status(chip); + + /* Set up the control register if the load succeeded - + * 48 kHz, internal clock, S/PDIF RCA mode */ + if (box_type >= 0) { + err = write_control_reg(chip, E3G_48KHZ, + E3G_FREQ_REG_DEFAULT, TRUE); + if (err < 0) + return err; + } + + return box_type; +} + + + +static int set_sample_rate(struct echoaudio *chip, u32 rate) +{ + u32 control_reg, clock, base_rate, frq_reg; + + /* Only set the clock for internal mode. */ + if (chip->input_clock != ECHO_CLOCK_INTERNAL) { + dev_warn(chip->card->dev, + "Cannot set sample rate - clock not set to CLK_CLOCKININTERNAL\n"); + /* Save the rate anyhow */ + chip->comm_page->sample_rate = cpu_to_le32(rate); + chip->sample_rate = rate; + set_input_clock(chip, chip->input_clock); + return 0; + } + + if (snd_BUG_ON(rate >= 50000 && + chip->digital_mode == DIGITAL_MODE_ADAT)) + return -EINVAL; + + clock = 0; + control_reg = le32_to_cpu(chip->comm_page->control_register); + control_reg &= E3G_CLOCK_CLEAR_MASK; + + switch (rate) { + case 96000: + clock = E3G_96KHZ; + break; + case 88200: + clock = E3G_88KHZ; + break; + case 48000: + clock = E3G_48KHZ; + break; + case 44100: + clock = E3G_44KHZ; + break; + case 32000: + clock = E3G_32KHZ; + break; + default: + clock = E3G_CONTINUOUS_CLOCK; + if (rate > 50000) + clock |= E3G_DOUBLE_SPEED_MODE; + break; + } + + control_reg |= clock; + control_reg = set_spdif_bits(chip, control_reg, rate); + + base_rate = rate; + if (base_rate > 50000) + base_rate /= 2; + if (base_rate < 32000) + base_rate = 32000; + + frq_reg = E3G_MAGIC_NUMBER / base_rate - 2; + if (frq_reg > E3G_FREQ_REG_MAX) + frq_reg = E3G_FREQ_REG_MAX; + + chip->comm_page->sample_rate = cpu_to_le32(rate); /* ignored by the DSP */ + chip->sample_rate = rate; + dev_dbg(chip->card->dev, + "SetSampleRate: %d clock %x\n", rate, control_reg); + + /* Tell the DSP about it - DSP reads both control reg & freq reg */ + return write_control_reg(chip, control_reg, frq_reg, 0); +} + + + +/* Set the sample clock source to internal, S/PDIF, ADAT */ +static int set_input_clock(struct echoaudio *chip, u16 clock) +{ + u32 control_reg, clocks_from_dsp; + + + /* Mask off the clock select bits */ + control_reg = le32_to_cpu(chip->comm_page->control_register) & + E3G_CLOCK_CLEAR_MASK; + clocks_from_dsp = le32_to_cpu(chip->comm_page->status_clocks); + + switch (clock) { + case ECHO_CLOCK_INTERNAL: + chip->input_clock = ECHO_CLOCK_INTERNAL; + return set_sample_rate(chip, chip->sample_rate); + case ECHO_CLOCK_SPDIF: + if (chip->digital_mode == DIGITAL_MODE_ADAT) + return -EAGAIN; + control_reg |= E3G_SPDIF_CLOCK; + if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_SPDIF96) + control_reg |= E3G_DOUBLE_SPEED_MODE; + else + control_reg &= ~E3G_DOUBLE_SPEED_MODE; + break; + case ECHO_CLOCK_ADAT: + if (chip->digital_mode != DIGITAL_MODE_ADAT) + return -EAGAIN; + control_reg |= E3G_ADAT_CLOCK; + control_reg &= ~E3G_DOUBLE_SPEED_MODE; + break; + case ECHO_CLOCK_WORD: + control_reg |= E3G_WORD_CLOCK; + if (clocks_from_dsp & E3G_CLOCK_DETECT_BIT_WORD96) + control_reg |= E3G_DOUBLE_SPEED_MODE; + else + control_reg &= ~E3G_DOUBLE_SPEED_MODE; + break; + default: + dev_err(chip->card->dev, + "Input clock 0x%x not supported for Echo3G\n", clock); + return -EINVAL; + } + + chip->input_clock = clock; + return write_control_reg(chip, control_reg, get_frq_reg(chip), 1); +} + + + +static int dsp_set_digital_mode(struct echoaudio *chip, u8 mode) +{ + u32 control_reg; + int err, incompatible_clock; + + /* Set clock to "internal" if it's not compatible with the new mode */ + incompatible_clock = FALSE; + switch (mode) { + case DIGITAL_MODE_SPDIF_OPTICAL: + case DIGITAL_MODE_SPDIF_RCA: + if (chip->input_clock == ECHO_CLOCK_ADAT) + incompatible_clock = TRUE; + break; + case DIGITAL_MODE_ADAT: + if (chip->input_clock == ECHO_CLOCK_SPDIF) + incompatible_clock = TRUE; + break; + default: + dev_err(chip->card->dev, + "Digital mode not supported: %d\n", mode); + return -EINVAL; + } + + spin_lock_irq(&chip->lock); + + if (incompatible_clock) { + chip->sample_rate = 48000; + set_input_clock(chip, ECHO_CLOCK_INTERNAL); + } + + /* Clear the current digital mode */ + control_reg = le32_to_cpu(chip->comm_page->control_register); + control_reg &= E3G_DIGITAL_MODE_CLEAR_MASK; + + /* Tweak the control reg */ + switch (mode) { + case DIGITAL_MODE_SPDIF_OPTICAL: + control_reg |= E3G_SPDIF_OPTICAL_MODE; + break; + case DIGITAL_MODE_SPDIF_RCA: + /* E3G_SPDIF_OPTICAL_MODE bit cleared */ + break; + case DIGITAL_MODE_ADAT: + control_reg |= E3G_ADAT_MODE; + control_reg &= ~E3G_DOUBLE_SPEED_MODE; /* @@ useless */ + break; + } + + err = write_control_reg(chip, control_reg, get_frq_reg(chip), 1); + spin_unlock_irq(&chip->lock); + if (err < 0) + return err; + chip->digital_mode = mode; + + dev_dbg(chip->card->dev, "set_digital_mode(%d)\n", chip->digital_mode); + return incompatible_clock; +} |