summaryrefslogtreecommitdiffstats
path: root/kernel/samples/pktgen
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/samples/pktgen')
-rw-r--r--kernel/samples/pktgen/README.rst43
-rw-r--r--kernel/samples/pktgen/functions.sh121
-rw-r--r--kernel/samples/pktgen/parameters.sh97
-rwxr-xr-xkernel/samples/pktgen/pktgen.conf-1-159
-rwxr-xr-xkernel/samples/pktgen/pktgen.conf-2-166
-rwxr-xr-xkernel/samples/pktgen/pktgen.conf-2-273
-rwxr-xr-xkernel/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh86
-rwxr-xr-xkernel/samples/pktgen/pktgen_sample01_simple.sh71
-rwxr-xr-xkernel/samples/pktgen/pktgen_sample02_multiqueue.sh75
-rwxr-xr-xkernel/samples/pktgen/pktgen_sample03_burst_single_flow.sh82
10 files changed, 575 insertions, 198 deletions
diff --git a/kernel/samples/pktgen/README.rst b/kernel/samples/pktgen/README.rst
new file mode 100644
index 000000000..8365c4e5c
--- /dev/null
+++ b/kernel/samples/pktgen/README.rst
@@ -0,0 +1,43 @@
+Sample and benchmark scripts for pktgen (packet generator)
+==========================================================
+This directory contains some pktgen sample and benchmark scripts, that
+can easily be copied and adjusted for your own use-case.
+
+General doc is located in kernel: Documentation/networking/pktgen.txt
+
+Helper include files
+====================
+This directory contains two helper shell files, that can be "included"
+by shell source'ing. Namely "functions.sh" and "parameters.sh".
+
+Common parameters
+-----------------
+The parameters.sh file support easy and consistant parameter parsing
+across the sample scripts. Usage example is printed on errors::
+
+ Usage: ./pktgen_sample01_simple.sh [-vx] -i ethX
+ -i : ($DEV) output interface/device (required)
+ -s : ($PKT_SIZE) packet size
+ -d : ($DEST_IP) destination IP
+ -m : ($DST_MAC) destination MAC-addr
+ -t : ($THREADS) threads to start
+ -c : ($SKB_CLONE) SKB clones send before alloc new SKB
+ -b : ($BURST) HW level bursting of SKBs
+ -v : ($VERBOSE) verbose
+ -x : ($DEBUG) debug
+
+The global variable being set is also listed. E.g. the required
+interface/device parameter "-i" sets variable $DEV.
+
+Common functions
+----------------
+The functions.sh file provides; Three different shell functions for
+configuring the different components of pktgen: pg_ctrl(), pg_thread()
+and pg_set().
+
+These functions correspond to pktgens different components.
+ * pg_ctrl() control "pgctrl" (/proc/net/pktgen/pgctrl)
+ * pg_thread() control the kernel threads and binding to devices
+ * pg_set() control setup of individual devices
+
+See sample scripts for usage examples.
diff --git a/kernel/samples/pktgen/functions.sh b/kernel/samples/pktgen/functions.sh
new file mode 100644
index 000000000..205e4cde4
--- /dev/null
+++ b/kernel/samples/pktgen/functions.sh
@@ -0,0 +1,121 @@
+#
+# Common functions used by pktgen scripts
+# - Depending on bash 3 (or higher) syntax
+#
+# Author: Jesper Dangaaard Brouer
+# License: GPL
+
+## -- General shell logging cmds --
+function err() {
+ local exitcode=$1
+ shift
+ echo "ERROR: $@" >&2
+ exit $exitcode
+}
+
+function warn() {
+ echo "WARN : $@" >&2
+}
+
+function info() {
+ if [[ -n "$VERBOSE" ]]; then
+ echo "INFO : $@" >&2
+ fi
+}
+
+## -- Pktgen proc config commands -- ##
+export PROC_DIR=/proc/net/pktgen
+#
+# Three different shell functions for configuring the different
+# components of pktgen:
+# pg_ctrl(), pg_thread() and pg_set().
+#
+# These functions correspond to pktgens different components.
+# * pg_ctrl() control "pgctrl" (/proc/net/pktgen/pgctrl)
+# * pg_thread() control the kernel threads and binding to devices
+# * pg_set() control setup of individual devices
+function pg_ctrl() {
+ local proc_file="pgctrl"
+ proc_cmd ${proc_file} "$@"
+}
+
+function pg_thread() {
+ local thread=$1
+ local proc_file="kpktgend_${thread}"
+ shift
+ proc_cmd ${proc_file} "$@"
+}
+
+function pg_set() {
+ local dev=$1
+ local proc_file="$dev"
+ shift
+ proc_cmd ${proc_file} "$@"
+}
+
+# More generic replacement for pgset(), that does not depend on global
+# variable for proc file.
+function proc_cmd() {
+ local result
+ local proc_file=$1
+ # after shift, the remaining args are contained in $@
+ shift
+ local proc_ctrl=${PROC_DIR}/$proc_file
+ if [[ ! -e "$proc_ctrl" ]]; then
+ err 3 "proc file:$proc_ctrl does not exists (dev added to thread?)"
+ else
+ if [[ ! -w "$proc_ctrl" ]]; then
+ err 4 "proc file:$proc_ctrl not writable, not root?!"
+ fi
+ fi
+
+ if [[ "$DEBUG" == "yes" ]]; then
+ echo "cmd: $@ > $proc_ctrl"
+ fi
+ # Quoting of "$@" is important for space expansion
+ echo "$@" > "$proc_ctrl"
+ local status=$?
+
+ result=$(grep "Result: OK:" $proc_ctrl)
+ # Due to pgctrl, cannot use exit code $? from grep
+ if [[ "$result" == "" ]]; then
+ grep "Result:" $proc_ctrl >&2
+ fi
+ if (( $status != 0 )); then
+ err 5 "Write error($status) occurred cmd: \"$@ > $proc_ctrl\""
+ fi
+}
+
+# Old obsolete "pgset" function, with slightly improved err handling
+function pgset() {
+ local result
+
+ if [[ "$DEBUG" == "yes" ]]; then
+ echo "cmd: $1 > $PGDEV"
+ fi
+ echo $1 > $PGDEV
+ local status=$?
+
+ result=`cat $PGDEV | fgrep "Result: OK:"`
+ if [[ "$result" == "" ]]; then
+ cat $PGDEV | fgrep Result:
+ fi
+ if (( $status != 0 )); then
+ err 5 "Write error($status) occurred cmd: \"$1 > $PGDEV\""
+ fi
+}
+
+## -- General shell tricks --
+
+function root_check_run_with_sudo() {
+ # Trick so, program can be run as normal user, will just use "sudo"
+ # call as root_check_run_as_sudo "$@"
+ if [ "$EUID" -ne 0 ]; then
+ if [ -x $0 ]; then # Directly executable use sudo
+ info "Not root, running with sudo"
+ sudo "$0" "$@"
+ exit $?
+ fi
+ err 4 "cannot perform sudo run of $0"
+ fi
+}
diff --git a/kernel/samples/pktgen/parameters.sh b/kernel/samples/pktgen/parameters.sh
new file mode 100644
index 000000000..33b70fdd5
--- /dev/null
+++ b/kernel/samples/pktgen/parameters.sh
@@ -0,0 +1,97 @@
+#
+# Common parameter parsing for pktgen scripts
+#
+
+function usage() {
+ echo ""
+ echo "Usage: $0 [-vx] -i ethX"
+ echo " -i : (\$DEV) output interface/device (required)"
+ echo " -s : (\$PKT_SIZE) packet size"
+ echo " -d : (\$DEST_IP) destination IP"
+ echo " -m : (\$DST_MAC) destination MAC-addr"
+ echo " -t : (\$THREADS) threads to start"
+ echo " -c : (\$SKB_CLONE) SKB clones send before alloc new SKB"
+ echo " -b : (\$BURST) HW level bursting of SKBs"
+ echo " -v : (\$VERBOSE) verbose"
+ echo " -x : (\$DEBUG) debug"
+ echo ""
+}
+
+## --- Parse command line arguments / parameters ---
+## echo "Commandline options:"
+while getopts "s:i:d:m:t:c:b:vxh" option; do
+ case $option in
+ i) # interface
+ export DEV=$OPTARG
+ info "Output device set to: DEV=$DEV"
+ ;;
+ s)
+ export PKT_SIZE=$OPTARG
+ info "Packet size set to: PKT_SIZE=$PKT_SIZE bytes"
+ ;;
+ d) # destination IP
+ export DEST_IP=$OPTARG
+ info "Destination IP set to: DEST_IP=$DEST_IP"
+ ;;
+ m) # MAC
+ export DST_MAC=$OPTARG
+ info "Destination MAC set to: DST_MAC=$DST_MAC"
+ ;;
+ t)
+ export THREADS=$OPTARG
+ export CPU_THREADS=$OPTARG
+ let "CPU_THREADS -= 1"
+ info "Number of threads to start: $THREADS (0 to $CPU_THREADS)"
+ ;;
+ c)
+ export CLONE_SKB=$OPTARG
+ info "CLONE_SKB=$CLONE_SKB"
+ ;;
+ b)
+ export BURST=$OPTARG
+ info "SKB bursting: BURST=$BURST"
+ ;;
+ v)
+ export VERBOSE=yes
+ info "Verbose mode: VERBOSE=$VERBOSE"
+ ;;
+ x)
+ export DEBUG=yes
+ info "Debug mode: DEBUG=$DEBUG"
+ ;;
+ h|?|*)
+ usage;
+ err 2 "[ERROR] Unknown parameters!!!"
+ esac
+done
+shift $(( $OPTIND - 1 ))
+
+if [ -z "$PKT_SIZE" ]; then
+ # NIC adds 4 bytes CRC
+ export PKT_SIZE=60
+ info "Default packet size set to: set to: $PKT_SIZE bytes"
+fi
+
+if [ -z "$THREADS" ]; then
+ # Zero CPU threads means one thread, because CPU numbers are zero indexed
+ export CPU_THREADS=0
+ export THREADS=1
+fi
+
+if [ -z "$DEV" ]; then
+ usage
+ err 2 "Please specify output device"
+fi
+
+if [ -z "$DST_MAC" ]; then
+ warn "Missing destination MAC address"
+fi
+
+if [ -z "$DEST_IP" ]; then
+ warn "Missing destination IP address"
+fi
+
+if [ ! -d /proc/net/pktgen ]; then
+ info "Loading kernel module: pktgen"
+ modprobe pktgen
+fi
diff --git a/kernel/samples/pktgen/pktgen.conf-1-1 b/kernel/samples/pktgen/pktgen.conf-1-1
deleted file mode 100755
index f91daad9e..000000000
--- a/kernel/samples/pktgen/pktgen.conf-1-1
+++ /dev/null
@@ -1,59 +0,0 @@
-#!/bin/bash
-
-#modprobe pktgen
-
-
-function pgset() {
- local result
-
- echo $1 > $PGDEV
-
- result=`cat $PGDEV | fgrep "Result: OK:"`
- if [ "$result" = "" ]; then
- cat $PGDEV | fgrep Result:
- fi
-}
-
-# Config Start Here -----------------------------------------------------------
-
-
-# thread config
-# Each CPU has its own thread. One CPU example. We add eth1.
-
-PGDEV=/proc/net/pktgen/kpktgend_0
- echo "Removing all devices"
- pgset "rem_device_all"
- echo "Adding eth1"
- pgset "add_device eth1"
-
-
-# device config
-# delay 0 means maximum speed.
-
-CLONE_SKB="clone_skb 1000000"
-# NIC adds 4 bytes CRC
-PKT_SIZE="pkt_size 60"
-
-# COUNT 0 means forever
-#COUNT="count 0"
-COUNT="count 10000000"
-DELAY="delay 0"
-
-PGDEV=/proc/net/pktgen/eth1
- echo "Configuring $PGDEV"
- pgset "$COUNT"
- pgset "$CLONE_SKB"
- pgset "$PKT_SIZE"
- pgset "$DELAY"
- pgset "dst 10.10.11.2"
- pgset "dst_mac 00:04:23:08:91:dc"
-
-
-# Time to run
-PGDEV=/proc/net/pktgen/pgctrl
-
- echo "Running... ctrl^C to stop"
- trap true INT
- pgset "start"
- echo "Done"
- cat /proc/net/pktgen/eth1
diff --git a/kernel/samples/pktgen/pktgen.conf-2-1 b/kernel/samples/pktgen/pktgen.conf-2-1
deleted file mode 100755
index e108e97d6..000000000
--- a/kernel/samples/pktgen/pktgen.conf-2-1
+++ /dev/null
@@ -1,66 +0,0 @@
-#!/bin/bash
-
-#modprobe pktgen
-
-
-function pgset() {
- local result
-
- echo $1 > $PGDEV
-
- result=`cat $PGDEV | fgrep "Result: OK:"`
- if [ "$result" = "" ]; then
- cat $PGDEV | fgrep Result:
- fi
-}
-
-# Config Start Here -----------------------------------------------------------
-
-
-# thread config
-# Each CPU has its own thread. Two CPU example. We add eth1 to the first
-# and leave the second idle.
-
-PGDEV=/proc/net/pktgen/kpktgend_0
- echo "Removing all devices"
- pgset "rem_device_all"
- echo "Adding eth1"
- pgset "add_device eth1"
-
-# We need to remove old config since we dont use this thread. We can only
-# one NIC on one CPU due to affinity reasons.
-
-PGDEV=/proc/net/pktgen/kpktgend_1
- echo "Removing all devices"
- pgset "rem_device_all"
-
-# device config
-# delay 0 means maximum speed.
-
-CLONE_SKB="clone_skb 1000000"
-# NIC adds 4 bytes CRC
-PKT_SIZE="pkt_size 60"
-
-# COUNT 0 means forever
-#COUNT="count 0"
-COUNT="count 10000000"
-DELAY="delay 0"
-
-PGDEV=/proc/net/pktgen/eth1
- echo "Configuring $PGDEV"
- pgset "$COUNT"
- pgset "$CLONE_SKB"
- pgset "$PKT_SIZE"
- pgset "$DELAY"
- pgset "dst 10.10.11.2"
- pgset "dst_mac 00:04:23:08:91:dc"
-
-
-# Time to run
-PGDEV=/proc/net/pktgen/pgctrl
-
- echo "Running... ctrl^C to stop"
- trap true INT
- pgset "start"
- echo "Done"
- cat /proc/net/pktgen/eth1
diff --git a/kernel/samples/pktgen/pktgen.conf-2-2 b/kernel/samples/pktgen/pktgen.conf-2-2
deleted file mode 100755
index acea15503..000000000
--- a/kernel/samples/pktgen/pktgen.conf-2-2
+++ /dev/null
@@ -1,73 +0,0 @@
-#!/bin/bash
-
-#modprobe pktgen
-
-
-function pgset() {
- local result
-
- echo $1 > $PGDEV
-
- result=`cat $PGDEV | fgrep "Result: OK:"`
- if [ "$result" = "" ]; then
- cat $PGDEV | fgrep Result:
- fi
-}
-
-# Config Start Here -----------------------------------------------------------
-
-
-# thread config
-# Each CPU has its own thread. Two CPU example. We add eth1, eth2 respectively.
-
-PGDEV=/proc/net/pktgen/kpktgend_0
- echo "Removing all devices"
- pgset "rem_device_all"
- echo "Adding eth1"
- pgset "add_device eth1"
-
-PGDEV=/proc/net/pktgen/kpktgend_1
- echo "Removing all devices"
- pgset "rem_device_all"
- echo "Adding eth2"
- pgset "add_device eth2"
-
-
-# device config
-# delay 0 means maximum speed.
-
-CLONE_SKB="clone_skb 1000000"
-# NIC adds 4 bytes CRC
-PKT_SIZE="pkt_size 60"
-
-# COUNT 0 means forever
-#COUNT="count 0"
-COUNT="count 10000000"
-DELAY="delay 0"
-
-PGDEV=/proc/net/pktgen/eth1
- echo "Configuring $PGDEV"
- pgset "$COUNT"
- pgset "$CLONE_SKB"
- pgset "$PKT_SIZE"
- pgset "$DELAY"
- pgset "dst 10.10.11.2"
- pgset "dst_mac 00:04:23:08:91:dc"
-
-PGDEV=/proc/net/pktgen/eth2
- echo "Configuring $PGDEV"
- pgset "$COUNT"
- pgset "$CLONE_SKB"
- pgset "$PKT_SIZE"
- pgset "$DELAY"
- pgset "dst 192.168.2.2"
- pgset "dst_mac 00:04:23:08:91:de"
-
-# Time to run
-PGDEV=/proc/net/pktgen/pgctrl
-
- echo "Running... ctrl^C to stop"
- trap true INT
- pgset "start"
- echo "Done"
- cat /proc/net/pktgen/eth1 /proc/net/pktgen/eth2
diff --git a/kernel/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh b/kernel/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
new file mode 100755
index 000000000..cb1590331
--- /dev/null
+++ b/kernel/samples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh
@@ -0,0 +1,86 @@
+#!/bin/bash
+#
+# Benchmark script:
+# - developed for benchmarking ingress qdisc path
+#
+# Script for injecting packets into RX path of the stack with pktgen
+# "xmit_mode netif_receive". With an invalid dst_mac this will only
+# measure the ingress code path as packets gets dropped in ip_rcv().
+#
+# This script don't really need any hardware. It benchmarks software
+# RX path just after NIC driver level. With bursting is also
+# "removes" the SKB alloc/free overhead.
+#
+# Setup scenarios for measuring ingress qdisc (with invalid dst_mac):
+# ------------------------------------------------------------------
+# (1) no ingress (uses static_key_false(&ingress_needed))
+#
+# (2) ingress on other dev (change ingress_needed and calls
+# handle_ing() but exit early)
+#
+# config: tc qdisc add dev $SOMEDEV handle ffff: ingress
+#
+# (3) ingress on this dev, handle_ing() -> tc_classify()
+#
+# config: tc qdisc add dev $DEV handle ffff: ingress
+#
+# (4) ingress on this dev + drop at u32 classifier/action.
+#
+basedir=`dirname $0`
+source ${basedir}/functions.sh
+root_check_run_with_sudo "$@"
+
+# Parameter parsing via include
+source ${basedir}/parameters.sh
+# Using invalid DST_MAC will cause the packets to get dropped in
+# ip_rcv() which is part of the test
+[ -z "$DEST_IP" ] && DEST_IP="198.18.0.42"
+[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
+[ -z "$BURST" ] && BURST=1024
+
+# Base Config
+DELAY="0" # Zero means max speed
+COUNT="10000000" # Zero means indefinitely
+
+# General cleanup everything since last run
+pg_ctrl "reset"
+
+# Threads are specified with parameter -t value in $THREADS
+for ((thread = 0; thread < $THREADS; thread++)); do
+ # The device name is extended with @name, using thread number to
+ # make then unique, but any name will do.
+ dev=${DEV}@${thread}
+
+ # Add remove all other devices and add_device $dev to thread
+ pg_thread $thread "rem_device_all"
+ pg_thread $thread "add_device" $dev
+
+ # Base config of dev
+ pg_set $dev "flag QUEUE_MAP_CPU"
+ pg_set $dev "count $COUNT"
+ pg_set $dev "pkt_size $PKT_SIZE"
+ pg_set $dev "delay $DELAY"
+ pg_set $dev "flag NO_TIMESTAMP"
+
+ # Destination
+ pg_set $dev "dst_mac $DST_MAC"
+ pg_set $dev "dst $DEST_IP"
+
+ # Inject packet into RX path of stack
+ pg_set $dev "xmit_mode netif_receive"
+
+ # Burst allow us to avoid measuring SKB alloc/free overhead
+ pg_set $dev "burst $BURST"
+done
+
+# start_run
+echo "Running... ctrl^C to stop" >&2
+pg_ctrl "start"
+echo "Done" >&2
+
+# Print results
+for ((thread = 0; thread < $THREADS; thread++)); do
+ dev=${DEV}@${thread}
+ echo "Device: $dev"
+ cat /proc/net/pktgen/$dev | grep -A2 "Result:"
+done
diff --git a/kernel/samples/pktgen/pktgen_sample01_simple.sh b/kernel/samples/pktgen/pktgen_sample01_simple.sh
new file mode 100755
index 000000000..8c9d318c2
--- /dev/null
+++ b/kernel/samples/pktgen/pktgen_sample01_simple.sh
@@ -0,0 +1,71 @@
+#!/bin/bash
+#
+# Simple example:
+# * pktgen sending with single thread and single interface
+# * flow variation via random UDP source port
+#
+basedir=`dirname $0`
+source ${basedir}/functions.sh
+root_check_run_with_sudo "$@"
+
+# Parameter parsing via include
+# - go look in parameters.sh to see which setting are avail
+# - required param is the interface "-i" stored in $DEV
+source ${basedir}/parameters.sh
+#
+# Set some default params, if they didn't get set
+[ -z "$DEST_IP" ] && DEST_IP="198.18.0.42"
+[ -z "$CLONE_SKB" ] && CLONE_SKB="0"
+# Example enforce param "-m" for dst_mac
+[ -z "$DST_MAC" ] && usage && err 2 "Must specify -m dst_mac"
+
+# Base Config
+DELAY="0" # Zero means max speed
+COUNT="100000" # Zero means indefinitely
+
+# Flow variation random source port between min and max
+UDP_MIN=9
+UDP_MAX=109
+
+# General cleanup everything since last run
+# (especially important if other threads were configured by other scripts)
+pg_ctrl "reset"
+
+# Add remove all other devices and add_device $DEV to thread 0
+thread=0
+pg_thread $thread "rem_device_all"
+pg_thread $thread "add_device" $DEV
+
+# How many packets to send (zero means indefinitely)
+pg_set $DEV "count $COUNT"
+
+# Reduce alloc cost by sending same SKB many times
+# - this obviously affects the randomness within the packet
+pg_set $DEV "clone_skb $CLONE_SKB"
+
+# Set packet size
+pg_set $DEV "pkt_size $PKT_SIZE"
+
+# Delay between packets (zero means max speed)
+pg_set $DEV "delay $DELAY"
+
+# Flag example disabling timestamping
+pg_set $DEV "flag NO_TIMESTAMP"
+
+# Destination
+pg_set $DEV "dst_mac $DST_MAC"
+pg_set $DEV "dst $DEST_IP"
+
+# Setup random UDP port src range
+pg_set $DEV "flag UDPSRC_RND"
+pg_set $DEV "udp_src_min $UDP_MIN"
+pg_set $DEV "udp_src_max $UDP_MAX"
+
+# start_run
+echo "Running... ctrl^C to stop" >&2
+pg_ctrl "start"
+echo "Done" >&2
+
+# Print results
+echo "Result device: $DEV"
+cat /proc/net/pktgen/$DEV
diff --git a/kernel/samples/pktgen/pktgen_sample02_multiqueue.sh b/kernel/samples/pktgen/pktgen_sample02_multiqueue.sh
new file mode 100755
index 000000000..32467aea8
--- /dev/null
+++ b/kernel/samples/pktgen/pktgen_sample02_multiqueue.sh
@@ -0,0 +1,75 @@
+#!/bin/bash
+#
+# Multiqueue: Using pktgen threads for sending on multiple CPUs
+# * adding devices to kernel threads
+# * notice the naming scheme for keeping device names unique
+# * nameing scheme: dev@thread_number
+# * flow variation via random UDP source port
+#
+basedir=`dirname $0`
+source ${basedir}/functions.sh
+root_check_run_with_sudo "$@"
+#
+# Required param: -i dev in $DEV
+source ${basedir}/parameters.sh
+
+# Base Config
+DELAY="0" # Zero means max speed
+COUNT="100000" # Zero means indefinitely
+[ -z "$CLONE_SKB" ] && CLONE_SKB="0"
+
+# Flow variation random source port between min and max
+UDP_MIN=9
+UDP_MAX=109
+
+# (example of setting default params in your script)
+[ -z "$DEST_IP" ] && DEST_IP="198.18.0.42"
+[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
+
+# General cleanup everything since last run
+pg_ctrl "reset"
+
+# Threads are specified with parameter -t value in $THREADS
+for ((thread = 0; thread < $THREADS; thread++)); do
+ # The device name is extended with @name, using thread number to
+ # make then unique, but any name will do.
+ dev=${DEV}@${thread}
+
+ # Add remove all other devices and add_device $dev to thread
+ pg_thread $thread "rem_device_all"
+ pg_thread $thread "add_device" $dev
+
+ # Notice config queue to map to cpu (mirrors smp_processor_id())
+ # It is beneficial to map IRQ /proc/irq/*/smp_affinity 1:1 to CPU number
+ pg_set $dev "flag QUEUE_MAP_CPU"
+
+ # Base config of dev
+ pg_set $dev "count $COUNT"
+ pg_set $dev "clone_skb $CLONE_SKB"
+ pg_set $dev "pkt_size $PKT_SIZE"
+ pg_set $dev "delay $DELAY"
+
+ # Flag example disabling timestamping
+ pg_set $dev "flag NO_TIMESTAMP"
+
+ # Destination
+ pg_set $dev "dst_mac $DST_MAC"
+ pg_set $dev "dst $DEST_IP"
+
+ # Setup random UDP port src range
+ pg_set $dev "flag UDPSRC_RND"
+ pg_set $dev "udp_src_min $UDP_MIN"
+ pg_set $dev "udp_src_max $UDP_MAX"
+done
+
+# start_run
+echo "Running... ctrl^C to stop" >&2
+pg_ctrl "start"
+echo "Done" >&2
+
+# Print results
+for ((thread = 0; thread < $THREADS; thread++)); do
+ dev=${DEV}@${thread}
+ echo "Device: $dev"
+ cat /proc/net/pktgen/$dev | grep -A2 "Result:"
+done
diff --git a/kernel/samples/pktgen/pktgen_sample03_burst_single_flow.sh b/kernel/samples/pktgen/pktgen_sample03_burst_single_flow.sh
new file mode 100755
index 000000000..775f5d0a1
--- /dev/null
+++ b/kernel/samples/pktgen/pktgen_sample03_burst_single_flow.sh
@@ -0,0 +1,82 @@
+#!/bin/bash
+#
+# Script for max single flow performance
+# - If correctly tuned[1], single CPU 10G wirespeed small pkts is possible[2]
+#
+# Using pktgen "burst" option (use -b $N)
+# - To boost max performance
+# - Avail since: kernel v3.18
+# * commit 38b2cf2982dc73 ("net: pktgen: packet bursting via skb->xmit_more")
+# - This avoids writing the HW tailptr on every driver xmit
+# - The performance boost is impressive, see commit and blog [2]
+#
+# Notice: On purpose generates a single (UDP) flow towards target,
+# reason behind this is to only overload/activate a single CPU on
+# target host. And no randomness for pktgen also makes it faster.
+#
+# Tuning see:
+# [1] http://netoptimizer.blogspot.dk/2014/06/pktgen-for-network-overload-testing.html
+# [2] http://netoptimizer.blogspot.dk/2014/10/unlocked-10gbps-tx-wirespeed-smallest.html
+#
+basedir=`dirname $0`
+source ${basedir}/functions.sh
+root_check_run_with_sudo "$@"
+
+# Parameter parsing via include
+source ${basedir}/parameters.sh
+# Set some default params, if they didn't get set
+[ -z "$DEST_IP" ] && DEST_IP="198.18.0.42"
+[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
+[ -z "$BURST" ] && BURST=32
+[ -z "$CLONE_SKB" ] && CLONE_SKB="100000"
+
+# Base Config
+DELAY="0" # Zero means max speed
+COUNT="0" # Zero means indefinitely
+
+# General cleanup everything since last run
+pg_ctrl "reset"
+
+# Threads are specified with parameter -t value in $THREADS
+for ((thread = 0; thread < $THREADS; thread++)); do
+ dev=${DEV}@${thread}
+
+ # Add remove all other devices and add_device $dev to thread
+ pg_thread $thread "rem_device_all"
+ pg_thread $thread "add_device" $dev
+
+ # Base config
+ pg_set $dev "flag QUEUE_MAP_CPU"
+ pg_set $dev "count $COUNT"
+ pg_set $dev "clone_skb $CLONE_SKB"
+ pg_set $dev "pkt_size $PKT_SIZE"
+ pg_set $dev "delay $DELAY"
+ pg_set $dev "flag NO_TIMESTAMP"
+
+ # Destination
+ pg_set $dev "dst_mac $DST_MAC"
+ pg_set $dev "dst $DEST_IP"
+
+ # Setup burst, for easy testing -b 0 disable bursting
+ # (internally in pktgen default and minimum burst=1)
+ if [[ ${BURST} -ne 0 ]]; then
+ pg_set $dev "burst $BURST"
+ else
+ info "$dev: Not using burst"
+ fi
+done
+
+# Run if user hits control-c
+function control_c() {
+ # Print results
+ for ((thread = 0; thread < $THREADS; thread++)); do
+ dev=${DEV}@${thread}
+ echo "Device: $dev"
+ cat /proc/net/pktgen/$dev | grep -A2 "Result:"
+ done
+}
+# trap keyboard interrupt (Ctrl-C)
+trap control_c SIGINT
+
+echo "Running... ctrl^C to stop" >&2
+pg_ctrl "start"