diff options
Diffstat (limited to 'kernel/net/irda')
51 files changed, 31832 insertions, 0 deletions
diff --git a/kernel/net/irda/Kconfig b/kernel/net/irda/Kconfig new file mode 100644 index 000000000..c8671a7ff --- /dev/null +++ b/kernel/net/irda/Kconfig @@ -0,0 +1,96 @@ +# +# IrDA protocol configuration +# + +menuconfig IRDA + depends on NET && !S390 + tristate "IrDA (infrared) subsystem support" + select CRC_CCITT + ---help--- + Say Y here if you want to build support for the IrDA (TM) protocols. + The Infrared Data Associations (tm) specifies standards for wireless + infrared communication and is supported by most laptops and PDA's. + + To use Linux support for the IrDA (tm) protocols, you will also need + some user-space utilities like irattach. For more information, see + the file <file:Documentation/networking/irda.txt>. You also want to + read the IR-HOWTO, available at + <http://www.tldp.org/docs.html#howto>. + + If you want to exchange bits of data (vCal, vCard) with a PDA, you + will need to install some OBEX application, such as OpenObex : + <http://sourceforge.net/projects/openobex/> + + To compile this support as a module, choose M here: the module will + be called irda. + +comment "IrDA protocols" + depends on IRDA + +source "net/irda/irlan/Kconfig" + +source "net/irda/irnet/Kconfig" + +source "net/irda/ircomm/Kconfig" + +config IRDA_ULTRA + bool "Ultra (connectionless) protocol" + depends on IRDA + help + Say Y here to support the connectionless Ultra IRDA protocol. + Ultra allows to exchange data over IrDA with really simple devices + (watch, beacon) without the overhead of the IrDA protocol (no handshaking, + no management frames, simple fixed header). + Ultra is available as a special socket : socket(AF_IRDA, SOCK_DGRAM, 1); + +comment "IrDA options" + depends on IRDA + +config IRDA_CACHE_LAST_LSAP + bool "Cache last LSAP" + depends on IRDA + help + Say Y here if you want IrLMP to cache the last LSAP used. This + makes sense since most frames will be sent/received on the same + connection. Enabling this option will save a hash-lookup per frame. + + If unsure, say Y. + +config IRDA_FAST_RR + bool "Fast RRs (low latency)" + depends on IRDA + ---help--- + Say Y here is you want IrLAP to send fast RR (Receive Ready) frames + when acting as a primary station. + Disabling this option will make latency over IrDA very bad. Enabling + this option will make the IrDA stack send more packet than strictly + necessary, thus reduce your battery life (but not that much). + + Fast RR will make IrLAP send out a RR frame immediately when + receiving a frame if its own transmit queue is currently empty. This + will give a lot of speed improvement when receiving much data since + the secondary station will not have to wait the max. turn around + time (usually 500ms) before it is allowed to transmit the next time. + If the transmit queue of the secondary is also empty, the primary will + start backing-off before sending another RR frame, waiting longer + each time until the back-off reaches the max. turn around time. + This back-off increase in controlled via + /proc/sys/net/irda/fast_poll_increase + + If unsure, say Y. + +config IRDA_DEBUG + bool "Debug information" + depends on IRDA + help + Say Y here if you want the IrDA subsystem to write debug information + to your syslog. You can change the debug level in + /proc/sys/net/irda/debug . + When this option is enabled, the IrDA also perform many extra internal + verifications which will usually prevent the kernel to crash in case of + bugs. + + If unsure, say Y (since it makes it easier to find the bugs). + +source "drivers/net/irda/Kconfig" + diff --git a/kernel/net/irda/Makefile b/kernel/net/irda/Makefile new file mode 100644 index 000000000..187f6c563 --- /dev/null +++ b/kernel/net/irda/Makefile @@ -0,0 +1,15 @@ +# +# Makefile for the Linux IrDA protocol layer. +# + +obj-$(CONFIG_IRDA) += irda.o +obj-$(CONFIG_IRLAN) += irlan/ +obj-$(CONFIG_IRNET) += irnet/ +obj-$(CONFIG_IRCOMM) += ircomm/ + +irda-y := iriap.o iriap_event.o irlmp.o irlmp_event.o irlmp_frame.o \ + irlap.o irlap_event.o irlap_frame.o timer.o qos.o irqueue.o \ + irttp.o irda_device.o irias_object.o wrapper.o af_irda.o \ + discovery.o parameters.o irnetlink.o irmod.o +irda-$(CONFIG_PROC_FS) += irproc.o +irda-$(CONFIG_SYSCTL) += irsysctl.o diff --git a/kernel/net/irda/af_irda.c b/kernel/net/irda/af_irda.c new file mode 100644 index 000000000..ee0ea25c8 --- /dev/null +++ b/kernel/net/irda/af_irda.c @@ -0,0 +1,2716 @@ +/********************************************************************* + * + * Filename: af_irda.c + * Version: 0.9 + * Description: IrDA sockets implementation + * Status: Stable + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Sun May 31 10:12:43 1998 + * Modified at: Sat Dec 25 21:10:23 1999 + * Modified by: Dag Brattli <dag@brattli.net> + * Sources: af_netroom.c, af_ax25.c, af_rose.c, af_x25.c etc. + * + * Copyright (c) 1999 Dag Brattli <dagb@cs.uit.no> + * Copyright (c) 1999-2003 Jean Tourrilhes <jt@hpl.hp.com> + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Linux-IrDA now supports four different types of IrDA sockets: + * + * o SOCK_STREAM: TinyTP connections with SAR disabled. The + * max SDU size is 0 for conn. of this type + * o SOCK_SEQPACKET: TinyTP connections with SAR enabled. TTP may + * fragment the messages, but will preserve + * the message boundaries + * o SOCK_DGRAM: IRDAPROTO_UNITDATA: TinyTP connections with Unitdata + * (unreliable) transfers + * IRDAPROTO_ULTRA: Connectionless and unreliable data + * + ********************************************************************/ + +#include <linux/capability.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/socket.h> +#include <linux/sockios.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/net.h> +#include <linux/irda.h> +#include <linux/poll.h> + +#include <asm/ioctls.h> /* TIOCOUTQ, TIOCINQ */ +#include <asm/uaccess.h> + +#include <net/sock.h> +#include <net/tcp_states.h> + +#include <net/irda/af_irda.h> + +static int irda_create(struct net *net, struct socket *sock, int protocol, int kern); + +static const struct proto_ops irda_stream_ops; +static const struct proto_ops irda_seqpacket_ops; +static const struct proto_ops irda_dgram_ops; + +#ifdef CONFIG_IRDA_ULTRA +static const struct proto_ops irda_ultra_ops; +#define ULTRA_MAX_DATA 382 +#endif /* CONFIG_IRDA_ULTRA */ + +#define IRDA_MAX_HEADER (TTP_MAX_HEADER) + +/* + * Function irda_data_indication (instance, sap, skb) + * + * Received some data from TinyTP. Just queue it on the receive queue + * + */ +static int irda_data_indication(void *instance, void *sap, struct sk_buff *skb) +{ + struct irda_sock *self; + struct sock *sk; + int err; + + self = instance; + sk = instance; + + err = sock_queue_rcv_skb(sk, skb); + if (err) { + pr_debug("%s(), error: no more mem!\n", __func__); + self->rx_flow = FLOW_STOP; + + /* When we return error, TTP will need to requeue the skb */ + return err; + } + + return 0; +} + +/* + * Function irda_disconnect_indication (instance, sap, reason, skb) + * + * Connection has been closed. Check reason to find out why + * + */ +static void irda_disconnect_indication(void *instance, void *sap, + LM_REASON reason, struct sk_buff *skb) +{ + struct irda_sock *self; + struct sock *sk; + + self = instance; + + pr_debug("%s(%p)\n", __func__, self); + + /* Don't care about it, but let's not leak it */ + if(skb) + dev_kfree_skb(skb); + + sk = instance; + if (sk == NULL) { + pr_debug("%s(%p) : BUG : sk is NULL\n", + __func__, self); + return; + } + + /* Prevent race conditions with irda_release() and irda_shutdown() */ + bh_lock_sock(sk); + if (!sock_flag(sk, SOCK_DEAD) && sk->sk_state != TCP_CLOSE) { + sk->sk_state = TCP_CLOSE; + sk->sk_shutdown |= SEND_SHUTDOWN; + + sk->sk_state_change(sk); + + /* Close our TSAP. + * If we leave it open, IrLMP put it back into the list of + * unconnected LSAPs. The problem is that any incoming request + * can then be matched to this socket (and it will be, because + * it is at the head of the list). This would prevent any + * listening socket waiting on the same TSAP to get those + * requests. Some apps forget to close sockets, or hang to it + * a bit too long, so we may stay in this dead state long + * enough to be noticed... + * Note : all socket function do check sk->sk_state, so we are + * safe... + * Jean II + */ + if (self->tsap) { + irttp_close_tsap(self->tsap); + self->tsap = NULL; + } + } + bh_unlock_sock(sk); + + /* Note : once we are there, there is not much you want to do + * with the socket anymore, apart from closing it. + * For example, bind() and connect() won't reset sk->sk_err, + * sk->sk_shutdown and sk->sk_flags to valid values... + * Jean II + */ +} + +/* + * Function irda_connect_confirm (instance, sap, qos, max_sdu_size, skb) + * + * Connections has been confirmed by the remote device + * + */ +static void irda_connect_confirm(void *instance, void *sap, + struct qos_info *qos, + __u32 max_sdu_size, __u8 max_header_size, + struct sk_buff *skb) +{ + struct irda_sock *self; + struct sock *sk; + + self = instance; + + pr_debug("%s(%p)\n", __func__, self); + + sk = instance; + if (sk == NULL) { + dev_kfree_skb(skb); + return; + } + + dev_kfree_skb(skb); + // Should be ??? skb_queue_tail(&sk->sk_receive_queue, skb); + + /* How much header space do we need to reserve */ + self->max_header_size = max_header_size; + + /* IrTTP max SDU size in transmit direction */ + self->max_sdu_size_tx = max_sdu_size; + + /* Find out what the largest chunk of data that we can transmit is */ + switch (sk->sk_type) { + case SOCK_STREAM: + if (max_sdu_size != 0) { + net_err_ratelimited("%s: max_sdu_size must be 0\n", + __func__); + return; + } + self->max_data_size = irttp_get_max_seg_size(self->tsap); + break; + case SOCK_SEQPACKET: + if (max_sdu_size == 0) { + net_err_ratelimited("%s: max_sdu_size cannot be 0\n", + __func__); + return; + } + self->max_data_size = max_sdu_size; + break; + default: + self->max_data_size = irttp_get_max_seg_size(self->tsap); + } + + pr_debug("%s(), max_data_size=%d\n", __func__, + self->max_data_size); + + memcpy(&self->qos_tx, qos, sizeof(struct qos_info)); + + /* We are now connected! */ + sk->sk_state = TCP_ESTABLISHED; + sk->sk_state_change(sk); +} + +/* + * Function irda_connect_indication(instance, sap, qos, max_sdu_size, userdata) + * + * Incoming connection + * + */ +static void irda_connect_indication(void *instance, void *sap, + struct qos_info *qos, __u32 max_sdu_size, + __u8 max_header_size, struct sk_buff *skb) +{ + struct irda_sock *self; + struct sock *sk; + + self = instance; + + pr_debug("%s(%p)\n", __func__, self); + + sk = instance; + if (sk == NULL) { + dev_kfree_skb(skb); + return; + } + + /* How much header space do we need to reserve */ + self->max_header_size = max_header_size; + + /* IrTTP max SDU size in transmit direction */ + self->max_sdu_size_tx = max_sdu_size; + + /* Find out what the largest chunk of data that we can transmit is */ + switch (sk->sk_type) { + case SOCK_STREAM: + if (max_sdu_size != 0) { + net_err_ratelimited("%s: max_sdu_size must be 0\n", + __func__); + kfree_skb(skb); + return; + } + self->max_data_size = irttp_get_max_seg_size(self->tsap); + break; + case SOCK_SEQPACKET: + if (max_sdu_size == 0) { + net_err_ratelimited("%s: max_sdu_size cannot be 0\n", + __func__); + kfree_skb(skb); + return; + } + self->max_data_size = max_sdu_size; + break; + default: + self->max_data_size = irttp_get_max_seg_size(self->tsap); + } + + pr_debug("%s(), max_data_size=%d\n", __func__, + self->max_data_size); + + memcpy(&self->qos_tx, qos, sizeof(struct qos_info)); + + skb_queue_tail(&sk->sk_receive_queue, skb); + sk->sk_state_change(sk); +} + +/* + * Function irda_connect_response (handle) + * + * Accept incoming connection + * + */ +static void irda_connect_response(struct irda_sock *self) +{ + struct sk_buff *skb; + + skb = alloc_skb(TTP_MAX_HEADER + TTP_SAR_HEADER, GFP_KERNEL); + if (skb == NULL) { + pr_debug("%s() Unable to allocate sk_buff!\n", + __func__); + return; + } + + /* Reserve space for MUX_CONTROL and LAP header */ + skb_reserve(skb, IRDA_MAX_HEADER); + + irttp_connect_response(self->tsap, self->max_sdu_size_rx, skb); +} + +/* + * Function irda_flow_indication (instance, sap, flow) + * + * Used by TinyTP to tell us if it can accept more data or not + * + */ +static void irda_flow_indication(void *instance, void *sap, LOCAL_FLOW flow) +{ + struct irda_sock *self; + struct sock *sk; + + self = instance; + sk = instance; + BUG_ON(sk == NULL); + + switch (flow) { + case FLOW_STOP: + pr_debug("%s(), IrTTP wants us to slow down\n", + __func__); + self->tx_flow = flow; + break; + case FLOW_START: + self->tx_flow = flow; + pr_debug("%s(), IrTTP wants us to start again\n", + __func__); + wake_up_interruptible(sk_sleep(sk)); + break; + default: + pr_debug("%s(), Unknown flow command!\n", __func__); + /* Unknown flow command, better stop */ + self->tx_flow = flow; + break; + } +} + +/* + * Function irda_getvalue_confirm (obj_id, value, priv) + * + * Got answer from remote LM-IAS, just pass object to requester... + * + * Note : duplicate from above, but we need our own version that + * doesn't touch the dtsap_sel and save the full value structure... + */ +static void irda_getvalue_confirm(int result, __u16 obj_id, + struct ias_value *value, void *priv) +{ + struct irda_sock *self; + + self = priv; + if (!self) { + net_warn_ratelimited("%s: lost myself!\n", __func__); + return; + } + + pr_debug("%s(%p)\n", __func__, self); + + /* We probably don't need to make any more queries */ + iriap_close(self->iriap); + self->iriap = NULL; + + /* Check if request succeeded */ + if (result != IAS_SUCCESS) { + pr_debug("%s(), IAS query failed! (%d)\n", __func__, + result); + + self->errno = result; /* We really need it later */ + + /* Wake up any processes waiting for result */ + wake_up_interruptible(&self->query_wait); + + return; + } + + /* Pass the object to the caller (so the caller must delete it) */ + self->ias_result = value; + self->errno = 0; + + /* Wake up any processes waiting for result */ + wake_up_interruptible(&self->query_wait); +} + +/* + * Function irda_selective_discovery_indication (discovery) + * + * Got a selective discovery indication from IrLMP. + * + * IrLMP is telling us that this node is new and matching our hint bit + * filter. Wake up any process waiting for answer... + */ +static void irda_selective_discovery_indication(discinfo_t *discovery, + DISCOVERY_MODE mode, + void *priv) +{ + struct irda_sock *self; + + self = priv; + if (!self) { + net_warn_ratelimited("%s: lost myself!\n", __func__); + return; + } + + /* Pass parameter to the caller */ + self->cachedaddr = discovery->daddr; + + /* Wake up process if its waiting for device to be discovered */ + wake_up_interruptible(&self->query_wait); +} + +/* + * Function irda_discovery_timeout (priv) + * + * Timeout in the selective discovery process + * + * We were waiting for a node to be discovered, but nothing has come up + * so far. Wake up the user and tell him that we failed... + */ +static void irda_discovery_timeout(u_long priv) +{ + struct irda_sock *self; + + self = (struct irda_sock *) priv; + BUG_ON(self == NULL); + + /* Nothing for the caller */ + self->cachelog = NULL; + self->cachedaddr = 0; + self->errno = -ETIME; + + /* Wake up process if its still waiting... */ + wake_up_interruptible(&self->query_wait); +} + +/* + * Function irda_open_tsap (self) + * + * Open local Transport Service Access Point (TSAP) + * + */ +static int irda_open_tsap(struct irda_sock *self, __u8 tsap_sel, char *name) +{ + notify_t notify; + + if (self->tsap) { + pr_debug("%s: busy!\n", __func__); + return -EBUSY; + } + + /* Initialize callbacks to be used by the IrDA stack */ + irda_notify_init(¬ify); + notify.connect_confirm = irda_connect_confirm; + notify.connect_indication = irda_connect_indication; + notify.disconnect_indication = irda_disconnect_indication; + notify.data_indication = irda_data_indication; + notify.udata_indication = irda_data_indication; + notify.flow_indication = irda_flow_indication; + notify.instance = self; + strncpy(notify.name, name, NOTIFY_MAX_NAME); + + self->tsap = irttp_open_tsap(tsap_sel, DEFAULT_INITIAL_CREDIT, + ¬ify); + if (self->tsap == NULL) { + pr_debug("%s(), Unable to allocate TSAP!\n", + __func__); + return -ENOMEM; + } + /* Remember which TSAP selector we actually got */ + self->stsap_sel = self->tsap->stsap_sel; + + return 0; +} + +/* + * Function irda_open_lsap (self) + * + * Open local Link Service Access Point (LSAP). Used for opening Ultra + * sockets + */ +#ifdef CONFIG_IRDA_ULTRA +static int irda_open_lsap(struct irda_sock *self, int pid) +{ + notify_t notify; + + if (self->lsap) { + net_warn_ratelimited("%s(), busy!\n", __func__); + return -EBUSY; + } + + /* Initialize callbacks to be used by the IrDA stack */ + irda_notify_init(¬ify); + notify.udata_indication = irda_data_indication; + notify.instance = self; + strncpy(notify.name, "Ultra", NOTIFY_MAX_NAME); + + self->lsap = irlmp_open_lsap(LSAP_CONNLESS, ¬ify, pid); + if (self->lsap == NULL) { + pr_debug("%s(), Unable to allocate LSAP!\n", __func__); + return -ENOMEM; + } + + return 0; +} +#endif /* CONFIG_IRDA_ULTRA */ + +/* + * Function irda_find_lsap_sel (self, name) + * + * Try to lookup LSAP selector in remote LM-IAS + * + * Basically, we start a IAP query, and then go to sleep. When the query + * return, irda_getvalue_confirm will wake us up, and we can examine the + * result of the query... + * Note that in some case, the query fail even before we go to sleep, + * creating some races... + */ +static int irda_find_lsap_sel(struct irda_sock *self, char *name) +{ + pr_debug("%s(%p, %s)\n", __func__, self, name); + + if (self->iriap) { + net_warn_ratelimited("%s(): busy with a previous query\n", + __func__); + return -EBUSY; + } + + self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self, + irda_getvalue_confirm); + if(self->iriap == NULL) + return -ENOMEM; + + /* Treat unexpected wakeup as disconnect */ + self->errno = -EHOSTUNREACH; + + /* Query remote LM-IAS */ + iriap_getvaluebyclass_request(self->iriap, self->saddr, self->daddr, + name, "IrDA:TinyTP:LsapSel"); + + /* Wait for answer, if not yet finished (or failed) */ + if (wait_event_interruptible(self->query_wait, (self->iriap==NULL))) + /* Treat signals as disconnect */ + return -EHOSTUNREACH; + + /* Check what happened */ + if (self->errno) + { + /* Requested object/attribute doesn't exist */ + if((self->errno == IAS_CLASS_UNKNOWN) || + (self->errno == IAS_ATTRIB_UNKNOWN)) + return -EADDRNOTAVAIL; + else + return -EHOSTUNREACH; + } + + /* Get the remote TSAP selector */ + switch (self->ias_result->type) { + case IAS_INTEGER: + pr_debug("%s() int=%d\n", + __func__, self->ias_result->t.integer); + + if (self->ias_result->t.integer != -1) + self->dtsap_sel = self->ias_result->t.integer; + else + self->dtsap_sel = 0; + break; + default: + self->dtsap_sel = 0; + pr_debug("%s(), bad type!\n", __func__); + break; + } + if (self->ias_result) + irias_delete_value(self->ias_result); + + if (self->dtsap_sel) + return 0; + + return -EADDRNOTAVAIL; +} + +/* + * Function irda_discover_daddr_and_lsap_sel (self, name) + * + * This try to find a device with the requested service. + * + * It basically look into the discovery log. For each address in the list, + * it queries the LM-IAS of the device to find if this device offer + * the requested service. + * If there is more than one node supporting the service, we complain + * to the user (it should move devices around). + * The, we set both the destination address and the lsap selector to point + * on the service on the unique device we have found. + * + * Note : this function fails if there is more than one device in range, + * because IrLMP doesn't disconnect the LAP when the last LSAP is closed. + * Moreover, we would need to wait the LAP disconnection... + */ +static int irda_discover_daddr_and_lsap_sel(struct irda_sock *self, char *name) +{ + discinfo_t *discoveries; /* Copy of the discovery log */ + int number; /* Number of nodes in the log */ + int i; + int err = -ENETUNREACH; + __u32 daddr = DEV_ADDR_ANY; /* Address we found the service on */ + __u8 dtsap_sel = 0x0; /* TSAP associated with it */ + + pr_debug("%s(), name=%s\n", __func__, name); + + /* Ask lmp for the current discovery log + * Note : we have to use irlmp_get_discoveries(), as opposed + * to play with the cachelog directly, because while we are + * making our ias query, le log might change... */ + discoveries = irlmp_get_discoveries(&number, self->mask.word, + self->nslots); + /* Check if the we got some results */ + if (discoveries == NULL) + return -ENETUNREACH; /* No nodes discovered */ + + /* + * Now, check all discovered devices (if any), and connect + * client only about the services that the client is + * interested in... + */ + for(i = 0; i < number; i++) { + /* Try the address in the log */ + self->daddr = discoveries[i].daddr; + self->saddr = 0x0; + pr_debug("%s(), trying daddr = %08x\n", + __func__, self->daddr); + + /* Query remote LM-IAS for this service */ + err = irda_find_lsap_sel(self, name); + switch (err) { + case 0: + /* We found the requested service */ + if(daddr != DEV_ADDR_ANY) { + pr_debug("%s(), discovered service ''%s'' in two different devices !!!\n", + __func__, name); + self->daddr = DEV_ADDR_ANY; + kfree(discoveries); + return -ENOTUNIQ; + } + /* First time we found that one, save it ! */ + daddr = self->daddr; + dtsap_sel = self->dtsap_sel; + break; + case -EADDRNOTAVAIL: + /* Requested service simply doesn't exist on this node */ + break; + default: + /* Something bad did happen :-( */ + pr_debug("%s(), unexpected IAS query failure\n", + __func__); + self->daddr = DEV_ADDR_ANY; + kfree(discoveries); + return -EHOSTUNREACH; + } + } + /* Cleanup our copy of the discovery log */ + kfree(discoveries); + + /* Check out what we found */ + if(daddr == DEV_ADDR_ANY) { + pr_debug("%s(), cannot discover service ''%s'' in any device !!!\n", + __func__, name); + self->daddr = DEV_ADDR_ANY; + return -EADDRNOTAVAIL; + } + + /* Revert back to discovered device & service */ + self->daddr = daddr; + self->saddr = 0x0; + self->dtsap_sel = dtsap_sel; + + pr_debug("%s(), discovered requested service ''%s'' at address %08x\n", + __func__, name, self->daddr); + + return 0; +} + +/* + * Function irda_getname (sock, uaddr, uaddr_len, peer) + * + * Return the our own, or peers socket address (sockaddr_irda) + * + */ +static int irda_getname(struct socket *sock, struct sockaddr *uaddr, + int *uaddr_len, int peer) +{ + struct sockaddr_irda saddr; + struct sock *sk = sock->sk; + struct irda_sock *self = irda_sk(sk); + + memset(&saddr, 0, sizeof(saddr)); + if (peer) { + if (sk->sk_state != TCP_ESTABLISHED) + return -ENOTCONN; + + saddr.sir_family = AF_IRDA; + saddr.sir_lsap_sel = self->dtsap_sel; + saddr.sir_addr = self->daddr; + } else { + saddr.sir_family = AF_IRDA; + saddr.sir_lsap_sel = self->stsap_sel; + saddr.sir_addr = self->saddr; + } + + pr_debug("%s(), tsap_sel = %#x\n", __func__, saddr.sir_lsap_sel); + pr_debug("%s(), addr = %08x\n", __func__, saddr.sir_addr); + + /* uaddr_len come to us uninitialised */ + *uaddr_len = sizeof (struct sockaddr_irda); + memcpy(uaddr, &saddr, *uaddr_len); + + return 0; +} + +/* + * Function irda_listen (sock, backlog) + * + * Just move to the listen state + * + */ +static int irda_listen(struct socket *sock, int backlog) +{ + struct sock *sk = sock->sk; + int err = -EOPNOTSUPP; + + lock_sock(sk); + + if ((sk->sk_type != SOCK_STREAM) && (sk->sk_type != SOCK_SEQPACKET) && + (sk->sk_type != SOCK_DGRAM)) + goto out; + + if (sk->sk_state != TCP_LISTEN) { + sk->sk_max_ack_backlog = backlog; + sk->sk_state = TCP_LISTEN; + + err = 0; + } +out: + release_sock(sk); + + return err; +} + +/* + * Function irda_bind (sock, uaddr, addr_len) + * + * Used by servers to register their well known TSAP + * + */ +static int irda_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) +{ + struct sock *sk = sock->sk; + struct sockaddr_irda *addr = (struct sockaddr_irda *) uaddr; + struct irda_sock *self = irda_sk(sk); + int err; + + pr_debug("%s(%p)\n", __func__, self); + + if (addr_len != sizeof(struct sockaddr_irda)) + return -EINVAL; + + lock_sock(sk); +#ifdef CONFIG_IRDA_ULTRA + /* Special care for Ultra sockets */ + if ((sk->sk_type == SOCK_DGRAM) && + (sk->sk_protocol == IRDAPROTO_ULTRA)) { + self->pid = addr->sir_lsap_sel; + err = -EOPNOTSUPP; + if (self->pid & 0x80) { + pr_debug("%s(), extension in PID not supp!\n", + __func__); + goto out; + } + err = irda_open_lsap(self, self->pid); + if (err < 0) + goto out; + + /* Pretend we are connected */ + sock->state = SS_CONNECTED; + sk->sk_state = TCP_ESTABLISHED; + err = 0; + + goto out; + } +#endif /* CONFIG_IRDA_ULTRA */ + + self->ias_obj = irias_new_object(addr->sir_name, jiffies); + err = -ENOMEM; + if (self->ias_obj == NULL) + goto out; + + err = irda_open_tsap(self, addr->sir_lsap_sel, addr->sir_name); + if (err < 0) { + irias_delete_object(self->ias_obj); + self->ias_obj = NULL; + goto out; + } + + /* Register with LM-IAS */ + irias_add_integer_attrib(self->ias_obj, "IrDA:TinyTP:LsapSel", + self->stsap_sel, IAS_KERNEL_ATTR); + irias_insert_object(self->ias_obj); + + err = 0; +out: + release_sock(sk); + return err; +} + +/* + * Function irda_accept (sock, newsock, flags) + * + * Wait for incoming connection + * + */ +static int irda_accept(struct socket *sock, struct socket *newsock, int flags) +{ + struct sock *sk = sock->sk; + struct irda_sock *new, *self = irda_sk(sk); + struct sock *newsk; + struct sk_buff *skb; + int err; + + err = irda_create(sock_net(sk), newsock, sk->sk_protocol, 0); + if (err) + return err; + + err = -EINVAL; + + lock_sock(sk); + if (sock->state != SS_UNCONNECTED) + goto out; + + if ((sk = sock->sk) == NULL) + goto out; + + err = -EOPNOTSUPP; + if ((sk->sk_type != SOCK_STREAM) && (sk->sk_type != SOCK_SEQPACKET) && + (sk->sk_type != SOCK_DGRAM)) + goto out; + + err = -EINVAL; + if (sk->sk_state != TCP_LISTEN) + goto out; + + /* + * The read queue this time is holding sockets ready to use + * hooked into the SABM we saved + */ + + /* + * We can perform the accept only if there is incoming data + * on the listening socket. + * So, we will block the caller until we receive any data. + * If the caller was waiting on select() or poll() before + * calling us, the data is waiting for us ;-) + * Jean II + */ + while (1) { + skb = skb_dequeue(&sk->sk_receive_queue); + if (skb) + break; + + /* Non blocking operation */ + err = -EWOULDBLOCK; + if (flags & O_NONBLOCK) + goto out; + + err = wait_event_interruptible(*(sk_sleep(sk)), + skb_peek(&sk->sk_receive_queue)); + if (err) + goto out; + } + + newsk = newsock->sk; + err = -EIO; + if (newsk == NULL) + goto out; + + newsk->sk_state = TCP_ESTABLISHED; + + new = irda_sk(newsk); + + /* Now attach up the new socket */ + new->tsap = irttp_dup(self->tsap, new); + err = -EPERM; /* value does not seem to make sense. -arnd */ + if (!new->tsap) { + pr_debug("%s(), dup failed!\n", __func__); + kfree_skb(skb); + goto out; + } + + new->stsap_sel = new->tsap->stsap_sel; + new->dtsap_sel = new->tsap->dtsap_sel; + new->saddr = irttp_get_saddr(new->tsap); + new->daddr = irttp_get_daddr(new->tsap); + + new->max_sdu_size_tx = self->max_sdu_size_tx; + new->max_sdu_size_rx = self->max_sdu_size_rx; + new->max_data_size = self->max_data_size; + new->max_header_size = self->max_header_size; + + memcpy(&new->qos_tx, &self->qos_tx, sizeof(struct qos_info)); + + /* Clean up the original one to keep it in listen state */ + irttp_listen(self->tsap); + + kfree_skb(skb); + sk->sk_ack_backlog--; + + newsock->state = SS_CONNECTED; + + irda_connect_response(new); + err = 0; +out: + release_sock(sk); + return err; +} + +/* + * Function irda_connect (sock, uaddr, addr_len, flags) + * + * Connect to a IrDA device + * + * The main difference with a "standard" connect is that with IrDA we need + * to resolve the service name into a TSAP selector (in TCP, port number + * doesn't have to be resolved). + * Because of this service name resolution, we can offer "auto-connect", + * where we connect to a service without specifying a destination address. + * + * Note : by consulting "errno", the user space caller may learn the cause + * of the failure. Most of them are visible in the function, others may come + * from subroutines called and are listed here : + * o EBUSY : already processing a connect + * o EHOSTUNREACH : bad addr->sir_addr argument + * o EADDRNOTAVAIL : bad addr->sir_name argument + * o ENOTUNIQ : more than one node has addr->sir_name (auto-connect) + * o ENETUNREACH : no node found on the network (auto-connect) + */ +static int irda_connect(struct socket *sock, struct sockaddr *uaddr, + int addr_len, int flags) +{ + struct sock *sk = sock->sk; + struct sockaddr_irda *addr = (struct sockaddr_irda *) uaddr; + struct irda_sock *self = irda_sk(sk); + int err; + + pr_debug("%s(%p)\n", __func__, self); + + lock_sock(sk); + /* Don't allow connect for Ultra sockets */ + err = -ESOCKTNOSUPPORT; + if ((sk->sk_type == SOCK_DGRAM) && (sk->sk_protocol == IRDAPROTO_ULTRA)) + goto out; + + if (sk->sk_state == TCP_ESTABLISHED && sock->state == SS_CONNECTING) { + sock->state = SS_CONNECTED; + err = 0; + goto out; /* Connect completed during a ERESTARTSYS event */ + } + + if (sk->sk_state == TCP_CLOSE && sock->state == SS_CONNECTING) { + sock->state = SS_UNCONNECTED; + err = -ECONNREFUSED; + goto out; + } + + err = -EISCONN; /* No reconnect on a seqpacket socket */ + if (sk->sk_state == TCP_ESTABLISHED) + goto out; + + sk->sk_state = TCP_CLOSE; + sock->state = SS_UNCONNECTED; + + err = -EINVAL; + if (addr_len != sizeof(struct sockaddr_irda)) + goto out; + + /* Check if user supplied any destination device address */ + if ((!addr->sir_addr) || (addr->sir_addr == DEV_ADDR_ANY)) { + /* Try to find one suitable */ + err = irda_discover_daddr_and_lsap_sel(self, addr->sir_name); + if (err) { + pr_debug("%s(), auto-connect failed!\n", __func__); + goto out; + } + } else { + /* Use the one provided by the user */ + self->daddr = addr->sir_addr; + pr_debug("%s(), daddr = %08x\n", __func__, self->daddr); + + /* If we don't have a valid service name, we assume the + * user want to connect on a specific LSAP. Prevent + * the use of invalid LSAPs (IrLMP 1.1 p10). Jean II */ + if((addr->sir_name[0] != '\0') || + (addr->sir_lsap_sel >= 0x70)) { + /* Query remote LM-IAS using service name */ + err = irda_find_lsap_sel(self, addr->sir_name); + if (err) { + pr_debug("%s(), connect failed!\n", __func__); + goto out; + } + } else { + /* Directly connect to the remote LSAP + * specified by the sir_lsap field. + * Please use with caution, in IrDA LSAPs are + * dynamic and there is no "well-known" LSAP. */ + self->dtsap_sel = addr->sir_lsap_sel; + } + } + + /* Check if we have opened a local TSAP */ + if (!self->tsap) + irda_open_tsap(self, LSAP_ANY, addr->sir_name); + + /* Move to connecting socket, start sending Connect Requests */ + sock->state = SS_CONNECTING; + sk->sk_state = TCP_SYN_SENT; + + /* Connect to remote device */ + err = irttp_connect_request(self->tsap, self->dtsap_sel, + self->saddr, self->daddr, NULL, + self->max_sdu_size_rx, NULL); + if (err) { + pr_debug("%s(), connect failed!\n", __func__); + goto out; + } + + /* Now the loop */ + err = -EINPROGRESS; + if (sk->sk_state != TCP_ESTABLISHED && (flags & O_NONBLOCK)) + goto out; + + err = -ERESTARTSYS; + if (wait_event_interruptible(*(sk_sleep(sk)), + (sk->sk_state != TCP_SYN_SENT))) + goto out; + + if (sk->sk_state != TCP_ESTABLISHED) { + sock->state = SS_UNCONNECTED; + err = sock_error(sk); + if (!err) + err = -ECONNRESET; + goto out; + } + + sock->state = SS_CONNECTED; + + /* At this point, IrLMP has assigned our source address */ + self->saddr = irttp_get_saddr(self->tsap); + err = 0; +out: + release_sock(sk); + return err; +} + +static struct proto irda_proto = { + .name = "IRDA", + .owner = THIS_MODULE, + .obj_size = sizeof(struct irda_sock), +}; + +/* + * Function irda_create (sock, protocol) + * + * Create IrDA socket + * + */ +static int irda_create(struct net *net, struct socket *sock, int protocol, + int kern) +{ + struct sock *sk; + struct irda_sock *self; + + if (net != &init_net) + return -EAFNOSUPPORT; + + /* Check for valid socket type */ + switch (sock->type) { + case SOCK_STREAM: /* For TTP connections with SAR disabled */ + case SOCK_SEQPACKET: /* For TTP connections with SAR enabled */ + case SOCK_DGRAM: /* For TTP Unitdata or LMP Ultra transfers */ + break; + default: + return -ESOCKTNOSUPPORT; + } + + /* Allocate networking socket */ + sk = sk_alloc(net, PF_IRDA, GFP_KERNEL, &irda_proto); + if (sk == NULL) + return -ENOMEM; + + self = irda_sk(sk); + pr_debug("%s() : self is %p\n", __func__, self); + + init_waitqueue_head(&self->query_wait); + + switch (sock->type) { + case SOCK_STREAM: + sock->ops = &irda_stream_ops; + self->max_sdu_size_rx = TTP_SAR_DISABLE; + break; + case SOCK_SEQPACKET: + sock->ops = &irda_seqpacket_ops; + self->max_sdu_size_rx = TTP_SAR_UNBOUND; + break; + case SOCK_DGRAM: + switch (protocol) { +#ifdef CONFIG_IRDA_ULTRA + case IRDAPROTO_ULTRA: + sock->ops = &irda_ultra_ops; + /* Initialise now, because we may send on unbound + * sockets. Jean II */ + self->max_data_size = ULTRA_MAX_DATA - LMP_PID_HEADER; + self->max_header_size = IRDA_MAX_HEADER + LMP_PID_HEADER; + break; +#endif /* CONFIG_IRDA_ULTRA */ + case IRDAPROTO_UNITDATA: + sock->ops = &irda_dgram_ops; + /* We let Unitdata conn. be like seqpack conn. */ + self->max_sdu_size_rx = TTP_SAR_UNBOUND; + break; + default: + sk_free(sk); + return -ESOCKTNOSUPPORT; + } + break; + default: + sk_free(sk); + return -ESOCKTNOSUPPORT; + } + + /* Initialise networking socket struct */ + sock_init_data(sock, sk); /* Note : set sk->sk_refcnt to 1 */ + sk->sk_family = PF_IRDA; + sk->sk_protocol = protocol; + + /* Register as a client with IrLMP */ + self->ckey = irlmp_register_client(0, NULL, NULL, NULL); + self->mask.word = 0xffff; + self->rx_flow = self->tx_flow = FLOW_START; + self->nslots = DISCOVERY_DEFAULT_SLOTS; + self->daddr = DEV_ADDR_ANY; /* Until we get connected */ + self->saddr = 0x0; /* so IrLMP assign us any link */ + return 0; +} + +/* + * Function irda_destroy_socket (self) + * + * Destroy socket + * + */ +static void irda_destroy_socket(struct irda_sock *self) +{ + pr_debug("%s(%p)\n", __func__, self); + + /* Unregister with IrLMP */ + irlmp_unregister_client(self->ckey); + irlmp_unregister_service(self->skey); + + /* Unregister with LM-IAS */ + if (self->ias_obj) { + irias_delete_object(self->ias_obj); + self->ias_obj = NULL; + } + + if (self->iriap) { + iriap_close(self->iriap); + self->iriap = NULL; + } + + if (self->tsap) { + irttp_disconnect_request(self->tsap, NULL, P_NORMAL); + irttp_close_tsap(self->tsap); + self->tsap = NULL; + } +#ifdef CONFIG_IRDA_ULTRA + if (self->lsap) { + irlmp_close_lsap(self->lsap); + self->lsap = NULL; + } +#endif /* CONFIG_IRDA_ULTRA */ +} + +/* + * Function irda_release (sock) + */ +static int irda_release(struct socket *sock) +{ + struct sock *sk = sock->sk; + + if (sk == NULL) + return 0; + + lock_sock(sk); + sk->sk_state = TCP_CLOSE; + sk->sk_shutdown |= SEND_SHUTDOWN; + sk->sk_state_change(sk); + + /* Destroy IrDA socket */ + irda_destroy_socket(irda_sk(sk)); + + sock_orphan(sk); + sock->sk = NULL; + release_sock(sk); + + /* Purge queues (see sock_init_data()) */ + skb_queue_purge(&sk->sk_receive_queue); + + /* Destroy networking socket if we are the last reference on it, + * i.e. if(sk->sk_refcnt == 0) -> sk_free(sk) */ + sock_put(sk); + + /* Notes on socket locking and deallocation... - Jean II + * In theory we should put pairs of sock_hold() / sock_put() to + * prevent the socket to be destroyed whenever there is an + * outstanding request or outstanding incoming packet or event. + * + * 1) This may include IAS request, both in connect and getsockopt. + * Unfortunately, the situation is a bit more messy than it looks, + * because we close iriap and kfree(self) above. + * + * 2) This may include selective discovery in getsockopt. + * Same stuff as above, irlmp registration and self are gone. + * + * Probably 1 and 2 may not matter, because it's all triggered + * by a process and the socket layer already prevent the + * socket to go away while a process is holding it, through + * sockfd_put() and fput()... + * + * 3) This may include deferred TSAP closure. In particular, + * we may receive a late irda_disconnect_indication() + * Fortunately, (tsap_cb *)->close_pend should protect us + * from that. + * + * I did some testing on SMP, and it looks solid. And the socket + * memory leak is now gone... - Jean II + */ + + return 0; +} + +/* + * Function irda_sendmsg (sock, msg, len) + * + * Send message down to TinyTP. This function is used for both STREAM and + * SEQPACK services. This is possible since it forces the client to + * fragment the message if necessary + */ +static int irda_sendmsg(struct socket *sock, struct msghdr *msg, size_t len) +{ + struct sock *sk = sock->sk; + struct irda_sock *self; + struct sk_buff *skb; + int err = -EPIPE; + + pr_debug("%s(), len=%zd\n", __func__, len); + + /* Note : socket.c set MSG_EOR on SEQPACKET sockets */ + if (msg->msg_flags & ~(MSG_DONTWAIT | MSG_EOR | MSG_CMSG_COMPAT | + MSG_NOSIGNAL)) { + return -EINVAL; + } + + lock_sock(sk); + + if (sk->sk_shutdown & SEND_SHUTDOWN) + goto out_err; + + if (sk->sk_state != TCP_ESTABLISHED) { + err = -ENOTCONN; + goto out; + } + + self = irda_sk(sk); + + /* Check if IrTTP is wants us to slow down */ + + if (wait_event_interruptible(*(sk_sleep(sk)), + (self->tx_flow != FLOW_STOP || sk->sk_state != TCP_ESTABLISHED))) { + err = -ERESTARTSYS; + goto out; + } + + /* Check if we are still connected */ + if (sk->sk_state != TCP_ESTABLISHED) { + err = -ENOTCONN; + goto out; + } + + /* Check that we don't send out too big frames */ + if (len > self->max_data_size) { + pr_debug("%s(), Chopping frame from %zd to %d bytes!\n", + __func__, len, self->max_data_size); + len = self->max_data_size; + } + + skb = sock_alloc_send_skb(sk, len + self->max_header_size + 16, + msg->msg_flags & MSG_DONTWAIT, &err); + if (!skb) + goto out_err; + + skb_reserve(skb, self->max_header_size + 16); + skb_reset_transport_header(skb); + skb_put(skb, len); + err = memcpy_from_msg(skb_transport_header(skb), msg, len); + if (err) { + kfree_skb(skb); + goto out_err; + } + + /* + * Just send the message to TinyTP, and let it deal with possible + * errors. No need to duplicate all that here + */ + err = irttp_data_request(self->tsap, skb); + if (err) { + pr_debug("%s(), err=%d\n", __func__, err); + goto out_err; + } + + release_sock(sk); + /* Tell client how much data we actually sent */ + return len; + +out_err: + err = sk_stream_error(sk, msg->msg_flags, err); +out: + release_sock(sk); + return err; + +} + +/* + * Function irda_recvmsg_dgram (sock, msg, size, flags) + * + * Try to receive message and copy it to user. The frame is discarded + * after being read, regardless of how much the user actually read + */ +static int irda_recvmsg_dgram(struct socket *sock, struct msghdr *msg, + size_t size, int flags) +{ + struct sock *sk = sock->sk; + struct irda_sock *self = irda_sk(sk); + struct sk_buff *skb; + size_t copied; + int err; + + skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT, + flags & MSG_DONTWAIT, &err); + if (!skb) + return err; + + skb_reset_transport_header(skb); + copied = skb->len; + + if (copied > size) { + pr_debug("%s(), Received truncated frame (%zd < %zd)!\n", + __func__, copied, size); + copied = size; + msg->msg_flags |= MSG_TRUNC; + } + skb_copy_datagram_msg(skb, 0, msg, copied); + + skb_free_datagram(sk, skb); + + /* + * Check if we have previously stopped IrTTP and we know + * have more free space in our rx_queue. If so tell IrTTP + * to start delivering frames again before our rx_queue gets + * empty + */ + if (self->rx_flow == FLOW_STOP) { + if ((atomic_read(&sk->sk_rmem_alloc) << 2) <= sk->sk_rcvbuf) { + pr_debug("%s(), Starting IrTTP\n", __func__); + self->rx_flow = FLOW_START; + irttp_flow_request(self->tsap, FLOW_START); + } + } + + return copied; +} + +/* + * Function irda_recvmsg_stream (sock, msg, size, flags) + */ +static int irda_recvmsg_stream(struct socket *sock, struct msghdr *msg, + size_t size, int flags) +{ + struct sock *sk = sock->sk; + struct irda_sock *self = irda_sk(sk); + int noblock = flags & MSG_DONTWAIT; + size_t copied = 0; + int target, err; + long timeo; + + if ((err = sock_error(sk)) < 0) + return err; + + if (sock->flags & __SO_ACCEPTCON) + return -EINVAL; + + err =-EOPNOTSUPP; + if (flags & MSG_OOB) + return -EOPNOTSUPP; + + err = 0; + target = sock_rcvlowat(sk, flags & MSG_WAITALL, size); + timeo = sock_rcvtimeo(sk, noblock); + + do { + int chunk; + struct sk_buff *skb = skb_dequeue(&sk->sk_receive_queue); + + if (skb == NULL) { + DEFINE_WAIT(wait); + err = 0; + + if (copied >= target) + break; + + prepare_to_wait_exclusive(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE); + + /* + * POSIX 1003.1g mandates this order. + */ + err = sock_error(sk); + if (err) + ; + else if (sk->sk_shutdown & RCV_SHUTDOWN) + ; + else if (noblock) + err = -EAGAIN; + else if (signal_pending(current)) + err = sock_intr_errno(timeo); + else if (sk->sk_state != TCP_ESTABLISHED) + err = -ENOTCONN; + else if (skb_peek(&sk->sk_receive_queue) == NULL) + /* Wait process until data arrives */ + schedule(); + + finish_wait(sk_sleep(sk), &wait); + + if (err) + return err; + if (sk->sk_shutdown & RCV_SHUTDOWN) + break; + + continue; + } + + chunk = min_t(unsigned int, skb->len, size); + if (memcpy_to_msg(msg, skb->data, chunk)) { + skb_queue_head(&sk->sk_receive_queue, skb); + if (copied == 0) + copied = -EFAULT; + break; + } + copied += chunk; + size -= chunk; + + /* Mark read part of skb as used */ + if (!(flags & MSG_PEEK)) { + skb_pull(skb, chunk); + + /* put the skb back if we didn't use it up.. */ + if (skb->len) { + pr_debug("%s(), back on q!\n", + __func__); + skb_queue_head(&sk->sk_receive_queue, skb); + break; + } + + kfree_skb(skb); + } else { + pr_debug("%s() questionable!?\n", __func__); + + /* put message back and return */ + skb_queue_head(&sk->sk_receive_queue, skb); + break; + } + } while (size); + + /* + * Check if we have previously stopped IrTTP and we know + * have more free space in our rx_queue. If so tell IrTTP + * to start delivering frames again before our rx_queue gets + * empty + */ + if (self->rx_flow == FLOW_STOP) { + if ((atomic_read(&sk->sk_rmem_alloc) << 2) <= sk->sk_rcvbuf) { + pr_debug("%s(), Starting IrTTP\n", __func__); + self->rx_flow = FLOW_START; + irttp_flow_request(self->tsap, FLOW_START); + } + } + + return copied; +} + +/* + * Function irda_sendmsg_dgram (sock, msg, len) + * + * Send message down to TinyTP for the unreliable sequenced + * packet service... + * + */ +static int irda_sendmsg_dgram(struct socket *sock, struct msghdr *msg, + size_t len) +{ + struct sock *sk = sock->sk; + struct irda_sock *self; + struct sk_buff *skb; + int err; + + pr_debug("%s(), len=%zd\n", __func__, len); + + if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_CMSG_COMPAT)) + return -EINVAL; + + lock_sock(sk); + + if (sk->sk_shutdown & SEND_SHUTDOWN) { + send_sig(SIGPIPE, current, 0); + err = -EPIPE; + goto out; + } + + err = -ENOTCONN; + if (sk->sk_state != TCP_ESTABLISHED) + goto out; + + self = irda_sk(sk); + + /* + * Check that we don't send out too big frames. This is an unreliable + * service, so we have no fragmentation and no coalescence + */ + if (len > self->max_data_size) { + pr_debug("%s(), Warning too much data! Chopping frame from %zd to %d bytes!\n", + __func__, len, self->max_data_size); + len = self->max_data_size; + } + + skb = sock_alloc_send_skb(sk, len + self->max_header_size, + msg->msg_flags & MSG_DONTWAIT, &err); + err = -ENOBUFS; + if (!skb) + goto out; + + skb_reserve(skb, self->max_header_size); + skb_reset_transport_header(skb); + + pr_debug("%s(), appending user data\n", __func__); + skb_put(skb, len); + err = memcpy_from_msg(skb_transport_header(skb), msg, len); + if (err) { + kfree_skb(skb); + goto out; + } + + /* + * Just send the message to TinyTP, and let it deal with possible + * errors. No need to duplicate all that here + */ + err = irttp_udata_request(self->tsap, skb); + if (err) { + pr_debug("%s(), err=%d\n", __func__, err); + goto out; + } + + release_sock(sk); + return len; + +out: + release_sock(sk); + return err; +} + +/* + * Function irda_sendmsg_ultra (sock, msg, len) + * + * Send message down to IrLMP for the unreliable Ultra + * packet service... + */ +#ifdef CONFIG_IRDA_ULTRA +static int irda_sendmsg_ultra(struct socket *sock, struct msghdr *msg, + size_t len) +{ + struct sock *sk = sock->sk; + struct irda_sock *self; + __u8 pid = 0; + int bound = 0; + struct sk_buff *skb; + int err; + + pr_debug("%s(), len=%zd\n", __func__, len); + + err = -EINVAL; + if (msg->msg_flags & ~(MSG_DONTWAIT|MSG_CMSG_COMPAT)) + return -EINVAL; + + lock_sock(sk); + + err = -EPIPE; + if (sk->sk_shutdown & SEND_SHUTDOWN) { + send_sig(SIGPIPE, current, 0); + goto out; + } + + self = irda_sk(sk); + + /* Check if an address was specified with sendto. Jean II */ + if (msg->msg_name) { + DECLARE_SOCKADDR(struct sockaddr_irda *, addr, msg->msg_name); + err = -EINVAL; + /* Check address, extract pid. Jean II */ + if (msg->msg_namelen < sizeof(*addr)) + goto out; + if (addr->sir_family != AF_IRDA) + goto out; + + pid = addr->sir_lsap_sel; + if (pid & 0x80) { + pr_debug("%s(), extension in PID not supp!\n", + __func__); + err = -EOPNOTSUPP; + goto out; + } + } else { + /* Check that the socket is properly bound to an Ultra + * port. Jean II */ + if ((self->lsap == NULL) || + (sk->sk_state != TCP_ESTABLISHED)) { + pr_debug("%s(), socket not bound to Ultra PID.\n", + __func__); + err = -ENOTCONN; + goto out; + } + /* Use PID from socket */ + bound = 1; + } + + /* + * Check that we don't send out too big frames. This is an unreliable + * service, so we have no fragmentation and no coalescence + */ + if (len > self->max_data_size) { + pr_debug("%s(), Warning too much data! Chopping frame from %zd to %d bytes!\n", + __func__, len, self->max_data_size); + len = self->max_data_size; + } + + skb = sock_alloc_send_skb(sk, len + self->max_header_size, + msg->msg_flags & MSG_DONTWAIT, &err); + err = -ENOBUFS; + if (!skb) + goto out; + + skb_reserve(skb, self->max_header_size); + skb_reset_transport_header(skb); + + pr_debug("%s(), appending user data\n", __func__); + skb_put(skb, len); + err = memcpy_from_msg(skb_transport_header(skb), msg, len); + if (err) { + kfree_skb(skb); + goto out; + } + + err = irlmp_connless_data_request((bound ? self->lsap : NULL), + skb, pid); + if (err) + pr_debug("%s(), err=%d\n", __func__, err); +out: + release_sock(sk); + return err ? : len; +} +#endif /* CONFIG_IRDA_ULTRA */ + +/* + * Function irda_shutdown (sk, how) + */ +static int irda_shutdown(struct socket *sock, int how) +{ + struct sock *sk = sock->sk; + struct irda_sock *self = irda_sk(sk); + + pr_debug("%s(%p)\n", __func__, self); + + lock_sock(sk); + + sk->sk_state = TCP_CLOSE; + sk->sk_shutdown |= SEND_SHUTDOWN; + sk->sk_state_change(sk); + + if (self->iriap) { + iriap_close(self->iriap); + self->iriap = NULL; + } + + if (self->tsap) { + irttp_disconnect_request(self->tsap, NULL, P_NORMAL); + irttp_close_tsap(self->tsap); + self->tsap = NULL; + } + + /* A few cleanup so the socket look as good as new... */ + self->rx_flow = self->tx_flow = FLOW_START; /* needed ??? */ + self->daddr = DEV_ADDR_ANY; /* Until we get re-connected */ + self->saddr = 0x0; /* so IrLMP assign us any link */ + + release_sock(sk); + + return 0; +} + +/* + * Function irda_poll (file, sock, wait) + */ +static unsigned int irda_poll(struct file * file, struct socket *sock, + poll_table *wait) +{ + struct sock *sk = sock->sk; + struct irda_sock *self = irda_sk(sk); + unsigned int mask; + + poll_wait(file, sk_sleep(sk), wait); + mask = 0; + + /* Exceptional events? */ + if (sk->sk_err) + mask |= POLLERR; + if (sk->sk_shutdown & RCV_SHUTDOWN) { + pr_debug("%s(), POLLHUP\n", __func__); + mask |= POLLHUP; + } + + /* Readable? */ + if (!skb_queue_empty(&sk->sk_receive_queue)) { + pr_debug("Socket is readable\n"); + mask |= POLLIN | POLLRDNORM; + } + + /* Connection-based need to check for termination and startup */ + switch (sk->sk_type) { + case SOCK_STREAM: + if (sk->sk_state == TCP_CLOSE) { + pr_debug("%s(), POLLHUP\n", __func__); + mask |= POLLHUP; + } + + if (sk->sk_state == TCP_ESTABLISHED) { + if ((self->tx_flow == FLOW_START) && + sock_writeable(sk)) + { + mask |= POLLOUT | POLLWRNORM | POLLWRBAND; + } + } + break; + case SOCK_SEQPACKET: + if ((self->tx_flow == FLOW_START) && + sock_writeable(sk)) + { + mask |= POLLOUT | POLLWRNORM | POLLWRBAND; + } + break; + case SOCK_DGRAM: + if (sock_writeable(sk)) + mask |= POLLOUT | POLLWRNORM | POLLWRBAND; + break; + default: + break; + } + + return mask; +} + +/* + * Function irda_ioctl (sock, cmd, arg) + */ +static int irda_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) +{ + struct sock *sk = sock->sk; + int err; + + pr_debug("%s(), cmd=%#x\n", __func__, cmd); + + err = -EINVAL; + switch (cmd) { + case TIOCOUTQ: { + long amount; + + amount = sk->sk_sndbuf - sk_wmem_alloc_get(sk); + if (amount < 0) + amount = 0; + err = put_user(amount, (unsigned int __user *)arg); + break; + } + + case TIOCINQ: { + struct sk_buff *skb; + long amount = 0L; + /* These two are safe on a single CPU system as only user tasks fiddle here */ + if ((skb = skb_peek(&sk->sk_receive_queue)) != NULL) + amount = skb->len; + err = put_user(amount, (unsigned int __user *)arg); + break; + } + + case SIOCGSTAMP: + if (sk != NULL) + err = sock_get_timestamp(sk, (struct timeval __user *)arg); + break; + + case SIOCGIFADDR: + case SIOCSIFADDR: + case SIOCGIFDSTADDR: + case SIOCSIFDSTADDR: + case SIOCGIFBRDADDR: + case SIOCSIFBRDADDR: + case SIOCGIFNETMASK: + case SIOCSIFNETMASK: + case SIOCGIFMETRIC: + case SIOCSIFMETRIC: + break; + default: + pr_debug("%s(), doing device ioctl!\n", __func__); + err = -ENOIOCTLCMD; + } + + return err; +} + +#ifdef CONFIG_COMPAT +/* + * Function irda_ioctl (sock, cmd, arg) + */ +static int irda_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) +{ + /* + * All IRDA's ioctl are standard ones. + */ + return -ENOIOCTLCMD; +} +#endif + +/* + * Function irda_setsockopt (sock, level, optname, optval, optlen) + * + * Set some options for the socket + * + */ +static int irda_setsockopt(struct socket *sock, int level, int optname, + char __user *optval, unsigned int optlen) +{ + struct sock *sk = sock->sk; + struct irda_sock *self = irda_sk(sk); + struct irda_ias_set *ias_opt; + struct ias_object *ias_obj; + struct ias_attrib * ias_attr; /* Attribute in IAS object */ + int opt, free_ias = 0, err = 0; + + pr_debug("%s(%p)\n", __func__, self); + + if (level != SOL_IRLMP) + return -ENOPROTOOPT; + + lock_sock(sk); + + switch (optname) { + case IRLMP_IAS_SET: + /* The user want to add an attribute to an existing IAS object + * (in the IAS database) or to create a new object with this + * attribute. + * We first query IAS to know if the object exist, and then + * create the right attribute... + */ + + if (optlen != sizeof(struct irda_ias_set)) { + err = -EINVAL; + goto out; + } + + ias_opt = kmalloc(sizeof(struct irda_ias_set), GFP_ATOMIC); + if (ias_opt == NULL) { + err = -ENOMEM; + goto out; + } + + /* Copy query to the driver. */ + if (copy_from_user(ias_opt, optval, optlen)) { + kfree(ias_opt); + err = -EFAULT; + goto out; + } + + /* Find the object we target. + * If the user gives us an empty string, we use the object + * associated with this socket. This will workaround + * duplicated class name - Jean II */ + if(ias_opt->irda_class_name[0] == '\0') { + if(self->ias_obj == NULL) { + kfree(ias_opt); + err = -EINVAL; + goto out; + } + ias_obj = self->ias_obj; + } else + ias_obj = irias_find_object(ias_opt->irda_class_name); + + /* Only ROOT can mess with the global IAS database. + * Users can only add attributes to the object associated + * with the socket they own - Jean II */ + if((!capable(CAP_NET_ADMIN)) && + ((ias_obj == NULL) || (ias_obj != self->ias_obj))) { + kfree(ias_opt); + err = -EPERM; + goto out; + } + + /* If the object doesn't exist, create it */ + if(ias_obj == (struct ias_object *) NULL) { + /* Create a new object */ + ias_obj = irias_new_object(ias_opt->irda_class_name, + jiffies); + if (ias_obj == NULL) { + kfree(ias_opt); + err = -ENOMEM; + goto out; + } + free_ias = 1; + } + + /* Do we have the attribute already ? */ + if(irias_find_attrib(ias_obj, ias_opt->irda_attrib_name)) { + kfree(ias_opt); + if (free_ias) { + kfree(ias_obj->name); + kfree(ias_obj); + } + err = -EINVAL; + goto out; + } + + /* Look at the type */ + switch(ias_opt->irda_attrib_type) { + case IAS_INTEGER: + /* Add an integer attribute */ + irias_add_integer_attrib( + ias_obj, + ias_opt->irda_attrib_name, + ias_opt->attribute.irda_attrib_int, + IAS_USER_ATTR); + break; + case IAS_OCT_SEQ: + /* Check length */ + if(ias_opt->attribute.irda_attrib_octet_seq.len > + IAS_MAX_OCTET_STRING) { + kfree(ias_opt); + if (free_ias) { + kfree(ias_obj->name); + kfree(ias_obj); + } + + err = -EINVAL; + goto out; + } + /* Add an octet sequence attribute */ + irias_add_octseq_attrib( + ias_obj, + ias_opt->irda_attrib_name, + ias_opt->attribute.irda_attrib_octet_seq.octet_seq, + ias_opt->attribute.irda_attrib_octet_seq.len, + IAS_USER_ATTR); + break; + case IAS_STRING: + /* Should check charset & co */ + /* Check length */ + /* The length is encoded in a __u8, and + * IAS_MAX_STRING == 256, so there is no way + * userspace can pass us a string too large. + * Jean II */ + /* NULL terminate the string (avoid troubles) */ + ias_opt->attribute.irda_attrib_string.string[ias_opt->attribute.irda_attrib_string.len] = '\0'; + /* Add a string attribute */ + irias_add_string_attrib( + ias_obj, + ias_opt->irda_attrib_name, + ias_opt->attribute.irda_attrib_string.string, + IAS_USER_ATTR); + break; + default : + kfree(ias_opt); + if (free_ias) { + kfree(ias_obj->name); + kfree(ias_obj); + } + err = -EINVAL; + goto out; + } + irias_insert_object(ias_obj); + kfree(ias_opt); + break; + case IRLMP_IAS_DEL: + /* The user want to delete an object from our local IAS + * database. We just need to query the IAS, check is the + * object is not owned by the kernel and delete it. + */ + + if (optlen != sizeof(struct irda_ias_set)) { + err = -EINVAL; + goto out; + } + + ias_opt = kmalloc(sizeof(struct irda_ias_set), GFP_ATOMIC); + if (ias_opt == NULL) { + err = -ENOMEM; + goto out; + } + + /* Copy query to the driver. */ + if (copy_from_user(ias_opt, optval, optlen)) { + kfree(ias_opt); + err = -EFAULT; + goto out; + } + + /* Find the object we target. + * If the user gives us an empty string, we use the object + * associated with this socket. This will workaround + * duplicated class name - Jean II */ + if(ias_opt->irda_class_name[0] == '\0') + ias_obj = self->ias_obj; + else + ias_obj = irias_find_object(ias_opt->irda_class_name); + if(ias_obj == (struct ias_object *) NULL) { + kfree(ias_opt); + err = -EINVAL; + goto out; + } + + /* Only ROOT can mess with the global IAS database. + * Users can only del attributes from the object associated + * with the socket they own - Jean II */ + if((!capable(CAP_NET_ADMIN)) && + ((ias_obj == NULL) || (ias_obj != self->ias_obj))) { + kfree(ias_opt); + err = -EPERM; + goto out; + } + + /* Find the attribute (in the object) we target */ + ias_attr = irias_find_attrib(ias_obj, + ias_opt->irda_attrib_name); + if(ias_attr == (struct ias_attrib *) NULL) { + kfree(ias_opt); + err = -EINVAL; + goto out; + } + + /* Check is the user space own the object */ + if(ias_attr->value->owner != IAS_USER_ATTR) { + pr_debug("%s(), attempting to delete a kernel attribute\n", + __func__); + kfree(ias_opt); + err = -EPERM; + goto out; + } + + /* Remove the attribute (and maybe the object) */ + irias_delete_attrib(ias_obj, ias_attr, 1); + kfree(ias_opt); + break; + case IRLMP_MAX_SDU_SIZE: + if (optlen < sizeof(int)) { + err = -EINVAL; + goto out; + } + + if (get_user(opt, (int __user *)optval)) { + err = -EFAULT; + goto out; + } + + /* Only possible for a seqpacket service (TTP with SAR) */ + if (sk->sk_type != SOCK_SEQPACKET) { + pr_debug("%s(), setting max_sdu_size = %d\n", + __func__, opt); + self->max_sdu_size_rx = opt; + } else { + net_warn_ratelimited("%s: not allowed to set MAXSDUSIZE for this socket type!\n", + __func__); + err = -ENOPROTOOPT; + goto out; + } + break; + case IRLMP_HINTS_SET: + if (optlen < sizeof(int)) { + err = -EINVAL; + goto out; + } + + /* The input is really a (__u8 hints[2]), easier as an int */ + if (get_user(opt, (int __user *)optval)) { + err = -EFAULT; + goto out; + } + + /* Unregister any old registration */ + if (self->skey) + irlmp_unregister_service(self->skey); + + self->skey = irlmp_register_service((__u16) opt); + break; + case IRLMP_HINT_MASK_SET: + /* As opposed to the previous case which set the hint bits + * that we advertise, this one set the filter we use when + * making a discovery (nodes which don't match any hint + * bit in the mask are not reported). + */ + if (optlen < sizeof(int)) { + err = -EINVAL; + goto out; + } + + /* The input is really a (__u8 hints[2]), easier as an int */ + if (get_user(opt, (int __user *)optval)) { + err = -EFAULT; + goto out; + } + + /* Set the new hint mask */ + self->mask.word = (__u16) opt; + /* Mask out extension bits */ + self->mask.word &= 0x7f7f; + /* Check if no bits */ + if(!self->mask.word) + self->mask.word = 0xFFFF; + + break; + default: + err = -ENOPROTOOPT; + break; + } + +out: + release_sock(sk); + + return err; +} + +/* + * Function irda_extract_ias_value(ias_opt, ias_value) + * + * Translate internal IAS value structure to the user space representation + * + * The external representation of IAS values, as we exchange them with + * user space program is quite different from the internal representation, + * as stored in the IAS database (because we need a flat structure for + * crossing kernel boundary). + * This function transform the former in the latter. We also check + * that the value type is valid. + */ +static int irda_extract_ias_value(struct irda_ias_set *ias_opt, + struct ias_value *ias_value) +{ + /* Look at the type */ + switch (ias_value->type) { + case IAS_INTEGER: + /* Copy the integer */ + ias_opt->attribute.irda_attrib_int = ias_value->t.integer; + break; + case IAS_OCT_SEQ: + /* Set length */ + ias_opt->attribute.irda_attrib_octet_seq.len = ias_value->len; + /* Copy over */ + memcpy(ias_opt->attribute.irda_attrib_octet_seq.octet_seq, + ias_value->t.oct_seq, ias_value->len); + break; + case IAS_STRING: + /* Set length */ + ias_opt->attribute.irda_attrib_string.len = ias_value->len; + ias_opt->attribute.irda_attrib_string.charset = ias_value->charset; + /* Copy over */ + memcpy(ias_opt->attribute.irda_attrib_string.string, + ias_value->t.string, ias_value->len); + /* NULL terminate the string (avoid troubles) */ + ias_opt->attribute.irda_attrib_string.string[ias_value->len] = '\0'; + break; + case IAS_MISSING: + default : + return -EINVAL; + } + + /* Copy type over */ + ias_opt->irda_attrib_type = ias_value->type; + + return 0; +} + +/* + * Function irda_getsockopt (sock, level, optname, optval, optlen) + */ +static int irda_getsockopt(struct socket *sock, int level, int optname, + char __user *optval, int __user *optlen) +{ + struct sock *sk = sock->sk; + struct irda_sock *self = irda_sk(sk); + struct irda_device_list list; + struct irda_device_info *discoveries; + struct irda_ias_set * ias_opt; /* IAS get/query params */ + struct ias_object * ias_obj; /* Object in IAS */ + struct ias_attrib * ias_attr; /* Attribute in IAS object */ + int daddr = DEV_ADDR_ANY; /* Dest address for IAS queries */ + int val = 0; + int len = 0; + int err = 0; + int offset, total; + + pr_debug("%s(%p)\n", __func__, self); + + if (level != SOL_IRLMP) + return -ENOPROTOOPT; + + if (get_user(len, optlen)) + return -EFAULT; + + if(len < 0) + return -EINVAL; + + lock_sock(sk); + + switch (optname) { + case IRLMP_ENUMDEVICES: + + /* Offset to first device entry */ + offset = sizeof(struct irda_device_list) - + sizeof(struct irda_device_info); + + if (len < offset) { + err = -EINVAL; + goto out; + } + + /* Ask lmp for the current discovery log */ + discoveries = irlmp_get_discoveries(&list.len, self->mask.word, + self->nslots); + /* Check if the we got some results */ + if (discoveries == NULL) { + err = -EAGAIN; + goto out; /* Didn't find any devices */ + } + + /* Write total list length back to client */ + if (copy_to_user(optval, &list, offset)) + err = -EFAULT; + + /* Copy the list itself - watch for overflow */ + if (list.len > 2048) { + err = -EINVAL; + goto bed; + } + total = offset + (list.len * sizeof(struct irda_device_info)); + if (total > len) + total = len; + if (copy_to_user(optval+offset, discoveries, total - offset)) + err = -EFAULT; + + /* Write total number of bytes used back to client */ + if (put_user(total, optlen)) + err = -EFAULT; +bed: + /* Free up our buffer */ + kfree(discoveries); + break; + case IRLMP_MAX_SDU_SIZE: + val = self->max_data_size; + len = sizeof(int); + if (put_user(len, optlen)) { + err = -EFAULT; + goto out; + } + + if (copy_to_user(optval, &val, len)) { + err = -EFAULT; + goto out; + } + + break; + case IRLMP_IAS_GET: + /* The user want an object from our local IAS database. + * We just need to query the IAS and return the value + * that we found */ + + /* Check that the user has allocated the right space for us */ + if (len != sizeof(struct irda_ias_set)) { + err = -EINVAL; + goto out; + } + + ias_opt = kmalloc(sizeof(struct irda_ias_set), GFP_ATOMIC); + if (ias_opt == NULL) { + err = -ENOMEM; + goto out; + } + + /* Copy query to the driver. */ + if (copy_from_user(ias_opt, optval, len)) { + kfree(ias_opt); + err = -EFAULT; + goto out; + } + + /* Find the object we target. + * If the user gives us an empty string, we use the object + * associated with this socket. This will workaround + * duplicated class name - Jean II */ + if(ias_opt->irda_class_name[0] == '\0') + ias_obj = self->ias_obj; + else + ias_obj = irias_find_object(ias_opt->irda_class_name); + if(ias_obj == (struct ias_object *) NULL) { + kfree(ias_opt); + err = -EINVAL; + goto out; + } + + /* Find the attribute (in the object) we target */ + ias_attr = irias_find_attrib(ias_obj, + ias_opt->irda_attrib_name); + if(ias_attr == (struct ias_attrib *) NULL) { + kfree(ias_opt); + err = -EINVAL; + goto out; + } + + /* Translate from internal to user structure */ + err = irda_extract_ias_value(ias_opt, ias_attr->value); + if(err) { + kfree(ias_opt); + goto out; + } + + /* Copy reply to the user */ + if (copy_to_user(optval, ias_opt, + sizeof(struct irda_ias_set))) { + kfree(ias_opt); + err = -EFAULT; + goto out; + } + /* Note : don't need to put optlen, we checked it */ + kfree(ias_opt); + break; + case IRLMP_IAS_QUERY: + /* The user want an object from a remote IAS database. + * We need to use IAP to query the remote database and + * then wait for the answer to come back. */ + + /* Check that the user has allocated the right space for us */ + if (len != sizeof(struct irda_ias_set)) { + err = -EINVAL; + goto out; + } + + ias_opt = kmalloc(sizeof(struct irda_ias_set), GFP_ATOMIC); + if (ias_opt == NULL) { + err = -ENOMEM; + goto out; + } + + /* Copy query to the driver. */ + if (copy_from_user(ias_opt, optval, len)) { + kfree(ias_opt); + err = -EFAULT; + goto out; + } + + /* At this point, there are two cases... + * 1) the socket is connected - that's the easy case, we + * just query the device we are connected to... + * 2) the socket is not connected - the user doesn't want + * to connect and/or may not have a valid service name + * (so can't create a fake connection). In this case, + * we assume that the user pass us a valid destination + * address in the requesting structure... + */ + if(self->daddr != DEV_ADDR_ANY) { + /* We are connected - reuse known daddr */ + daddr = self->daddr; + } else { + /* We are not connected, we must specify a valid + * destination address */ + daddr = ias_opt->daddr; + if((!daddr) || (daddr == DEV_ADDR_ANY)) { + kfree(ias_opt); + err = -EINVAL; + goto out; + } + } + + /* Check that we can proceed with IAP */ + if (self->iriap) { + net_warn_ratelimited("%s: busy with a previous query\n", + __func__); + kfree(ias_opt); + err = -EBUSY; + goto out; + } + + self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self, + irda_getvalue_confirm); + + if (self->iriap == NULL) { + kfree(ias_opt); + err = -ENOMEM; + goto out; + } + + /* Treat unexpected wakeup as disconnect */ + self->errno = -EHOSTUNREACH; + + /* Query remote LM-IAS */ + iriap_getvaluebyclass_request(self->iriap, + self->saddr, daddr, + ias_opt->irda_class_name, + ias_opt->irda_attrib_name); + + /* Wait for answer, if not yet finished (or failed) */ + if (wait_event_interruptible(self->query_wait, + (self->iriap == NULL))) { + /* pending request uses copy of ias_opt-content + * we can free it regardless! */ + kfree(ias_opt); + /* Treat signals as disconnect */ + err = -EHOSTUNREACH; + goto out; + } + + /* Check what happened */ + if (self->errno) + { + kfree(ias_opt); + /* Requested object/attribute doesn't exist */ + if((self->errno == IAS_CLASS_UNKNOWN) || + (self->errno == IAS_ATTRIB_UNKNOWN)) + err = -EADDRNOTAVAIL; + else + err = -EHOSTUNREACH; + + goto out; + } + + /* Translate from internal to user structure */ + err = irda_extract_ias_value(ias_opt, self->ias_result); + if (self->ias_result) + irias_delete_value(self->ias_result); + if (err) { + kfree(ias_opt); + goto out; + } + + /* Copy reply to the user */ + if (copy_to_user(optval, ias_opt, + sizeof(struct irda_ias_set))) { + kfree(ias_opt); + err = -EFAULT; + goto out; + } + /* Note : don't need to put optlen, we checked it */ + kfree(ias_opt); + break; + case IRLMP_WAITDEVICE: + /* This function is just another way of seeing life ;-) + * IRLMP_ENUMDEVICES assumes that you have a static network, + * and that you just want to pick one of the devices present. + * On the other hand, in here we assume that no device is + * present and that at some point in the future a device will + * come into range. When this device arrive, we just wake + * up the caller, so that he has time to connect to it before + * the device goes away... + * Note : once the node has been discovered for more than a + * few second, it won't trigger this function, unless it + * goes away and come back changes its hint bits (so we + * might call it IRLMP_WAITNEWDEVICE). + */ + + /* Check that the user is passing us an int */ + if (len != sizeof(int)) { + err = -EINVAL; + goto out; + } + /* Get timeout in ms (max time we block the caller) */ + if (get_user(val, (int __user *)optval)) { + err = -EFAULT; + goto out; + } + + /* Tell IrLMP we want to be notified */ + irlmp_update_client(self->ckey, self->mask.word, + irda_selective_discovery_indication, + NULL, (void *) self); + + /* Do some discovery (and also return cached results) */ + irlmp_discovery_request(self->nslots); + + /* Wait until a node is discovered */ + if (!self->cachedaddr) { + pr_debug("%s(), nothing discovered yet, going to sleep...\n", + __func__); + + /* Set watchdog timer to expire in <val> ms. */ + self->errno = 0; + setup_timer(&self->watchdog, irda_discovery_timeout, + (unsigned long)self); + mod_timer(&self->watchdog, + jiffies + msecs_to_jiffies(val)); + + /* Wait for IR-LMP to call us back */ + err = __wait_event_interruptible(self->query_wait, + (self->cachedaddr != 0 || self->errno == -ETIME)); + + /* If watchdog is still activated, kill it! */ + del_timer(&(self->watchdog)); + + pr_debug("%s(), ...waking up !\n", __func__); + + if (err != 0) + goto out; + } + else + pr_debug("%s(), found immediately !\n", + __func__); + + /* Tell IrLMP that we have been notified */ + irlmp_update_client(self->ckey, self->mask.word, + NULL, NULL, NULL); + + /* Check if the we got some results */ + if (!self->cachedaddr) { + err = -EAGAIN; /* Didn't find any devices */ + goto out; + } + daddr = self->cachedaddr; + /* Cleanup */ + self->cachedaddr = 0; + + /* We return the daddr of the device that trigger the + * wakeup. As irlmp pass us only the new devices, we + * are sure that it's not an old device. + * If the user want more details, he should query + * the whole discovery log and pick one device... + */ + if (put_user(daddr, (int __user *)optval)) { + err = -EFAULT; + goto out; + } + + break; + default: + err = -ENOPROTOOPT; + } + +out: + + release_sock(sk); + + return err; +} + +static const struct net_proto_family irda_family_ops = { + .family = PF_IRDA, + .create = irda_create, + .owner = THIS_MODULE, +}; + +static const struct proto_ops irda_stream_ops = { + .family = PF_IRDA, + .owner = THIS_MODULE, + .release = irda_release, + .bind = irda_bind, + .connect = irda_connect, + .socketpair = sock_no_socketpair, + .accept = irda_accept, + .getname = irda_getname, + .poll = irda_poll, + .ioctl = irda_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = irda_compat_ioctl, +#endif + .listen = irda_listen, + .shutdown = irda_shutdown, + .setsockopt = irda_setsockopt, + .getsockopt = irda_getsockopt, + .sendmsg = irda_sendmsg, + .recvmsg = irda_recvmsg_stream, + .mmap = sock_no_mmap, + .sendpage = sock_no_sendpage, +}; + +static const struct proto_ops irda_seqpacket_ops = { + .family = PF_IRDA, + .owner = THIS_MODULE, + .release = irda_release, + .bind = irda_bind, + .connect = irda_connect, + .socketpair = sock_no_socketpair, + .accept = irda_accept, + .getname = irda_getname, + .poll = datagram_poll, + .ioctl = irda_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = irda_compat_ioctl, +#endif + .listen = irda_listen, + .shutdown = irda_shutdown, + .setsockopt = irda_setsockopt, + .getsockopt = irda_getsockopt, + .sendmsg = irda_sendmsg, + .recvmsg = irda_recvmsg_dgram, + .mmap = sock_no_mmap, + .sendpage = sock_no_sendpage, +}; + +static const struct proto_ops irda_dgram_ops = { + .family = PF_IRDA, + .owner = THIS_MODULE, + .release = irda_release, + .bind = irda_bind, + .connect = irda_connect, + .socketpair = sock_no_socketpair, + .accept = irda_accept, + .getname = irda_getname, + .poll = datagram_poll, + .ioctl = irda_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = irda_compat_ioctl, +#endif + .listen = irda_listen, + .shutdown = irda_shutdown, + .setsockopt = irda_setsockopt, + .getsockopt = irda_getsockopt, + .sendmsg = irda_sendmsg_dgram, + .recvmsg = irda_recvmsg_dgram, + .mmap = sock_no_mmap, + .sendpage = sock_no_sendpage, +}; + +#ifdef CONFIG_IRDA_ULTRA +static const struct proto_ops irda_ultra_ops = { + .family = PF_IRDA, + .owner = THIS_MODULE, + .release = irda_release, + .bind = irda_bind, + .connect = sock_no_connect, + .socketpair = sock_no_socketpair, + .accept = sock_no_accept, + .getname = irda_getname, + .poll = datagram_poll, + .ioctl = irda_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = irda_compat_ioctl, +#endif + .listen = sock_no_listen, + .shutdown = irda_shutdown, + .setsockopt = irda_setsockopt, + .getsockopt = irda_getsockopt, + .sendmsg = irda_sendmsg_ultra, + .recvmsg = irda_recvmsg_dgram, + .mmap = sock_no_mmap, + .sendpage = sock_no_sendpage, +}; +#endif /* CONFIG_IRDA_ULTRA */ + +/* + * Function irsock_init (pro) + * + * Initialize IrDA protocol + * + */ +int __init irsock_init(void) +{ + int rc = proto_register(&irda_proto, 0); + + if (rc == 0) + rc = sock_register(&irda_family_ops); + + return rc; +} + +/* + * Function irsock_cleanup (void) + * + * Remove IrDA protocol + * + */ +void irsock_cleanup(void) +{ + sock_unregister(PF_IRDA); + proto_unregister(&irda_proto); +} diff --git a/kernel/net/irda/discovery.c b/kernel/net/irda/discovery.c new file mode 100644 index 000000000..364d70aed --- /dev/null +++ b/kernel/net/irda/discovery.c @@ -0,0 +1,417 @@ +/********************************************************************* + * + * Filename: discovery.c + * Version: 0.1 + * Description: Routines for handling discoveries at the IrLMP layer + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Tue Apr 6 15:33:50 1999 + * Modified at: Sat Oct 9 17:11:31 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * Modified at: Fri May 28 3:11 CST 1999 + * Modified by: Horst von Brand <vonbrand@sleipnir.valparaiso.cl> + * + * Copyright (c) 1999 Dag Brattli, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + ********************************************************************/ + +#include <linux/string.h> +#include <linux/socket.h> +#include <linux/fs.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/export.h> + +#include <net/irda/irda.h> +#include <net/irda/irlmp.h> + +#include <net/irda/discovery.h> + +#include <asm/unaligned.h> + +/* + * Function irlmp_add_discovery (cachelog, discovery) + * + * Add a new discovery to the cachelog, and remove any old discoveries + * from the same device + * + * Note : we try to preserve the time this device was *first* discovered + * (as opposed to the time of last discovery used for cleanup). This is + * used by clients waiting for discovery events to tell if the device + * discovered is "new" or just the same old one. They can't rely there + * on a binary flag (new/old), because not all discovery events are + * propagated to them, and they might not always listen, so they would + * miss some new devices popping up... + * Jean II + */ +void irlmp_add_discovery(hashbin_t *cachelog, discovery_t *new) +{ + discovery_t *discovery, *node; + unsigned long flags; + + /* Set time of first discovery if node is new (see below) */ + new->firststamp = new->timestamp; + + spin_lock_irqsave(&cachelog->hb_spinlock, flags); + + /* + * Remove all discoveries of devices that has previously been + * discovered on the same link with the same name (info), or the + * same daddr. We do this since some devices (mostly PDAs) change + * their device address between every discovery. + */ + discovery = (discovery_t *) hashbin_get_first(cachelog); + while (discovery != NULL ) { + node = discovery; + + /* Be sure to stay one item ahead */ + discovery = (discovery_t *) hashbin_get_next(cachelog); + + if ((node->data.saddr == new->data.saddr) && + ((node->data.daddr == new->data.daddr) || + (strcmp(node->data.info, new->data.info) == 0))) + { + /* This discovery is a previous discovery + * from the same device, so just remove it + */ + hashbin_remove_this(cachelog, (irda_queue_t *) node); + /* Check if hints bits are unchanged */ + if (get_unaligned((__u16 *)node->data.hints) == get_unaligned((__u16 *)new->data.hints)) + /* Set time of first discovery for this node */ + new->firststamp = node->firststamp; + kfree(node); + } + } + + /* Insert the new and updated version */ + hashbin_insert(cachelog, (irda_queue_t *) new, new->data.daddr, NULL); + + spin_unlock_irqrestore(&cachelog->hb_spinlock, flags); +} + +/* + * Function irlmp_add_discovery_log (cachelog, log) + * + * Merge a disovery log into the cachelog. + * + */ +void irlmp_add_discovery_log(hashbin_t *cachelog, hashbin_t *log) +{ + discovery_t *discovery; + + /* + * If log is missing this means that IrLAP was unable to perform the + * discovery, so restart discovery again with just the half timeout + * of the normal one. + */ + /* Well... It means that there was nobody out there - Jean II */ + if (log == NULL) { + /* irlmp_start_discovery_timer(irlmp, 150); */ + return; + } + + /* + * Locking : we are the only owner of this discovery log, so + * no need to lock it. + * We just need to lock the global log in irlmp_add_discovery(). + */ + discovery = (discovery_t *) hashbin_remove_first(log); + while (discovery != NULL) { + irlmp_add_discovery(cachelog, discovery); + + discovery = (discovery_t *) hashbin_remove_first(log); + } + + /* Delete the now empty log */ + hashbin_delete(log, (FREE_FUNC) kfree); +} + +/* + * Function irlmp_expire_discoveries (log, saddr, force) + * + * Go through all discoveries and expire all that has stayed too long + * + * Note : this assume that IrLAP won't change its saddr, which + * currently is a valid assumption... + */ +void irlmp_expire_discoveries(hashbin_t *log, __u32 saddr, int force) +{ + discovery_t * discovery; + discovery_t * curr; + unsigned long flags; + discinfo_t * buffer = NULL; + int n; /* Size of the full log */ + int i = 0; /* How many we expired */ + + IRDA_ASSERT(log != NULL, return;); + spin_lock_irqsave(&log->hb_spinlock, flags); + + discovery = (discovery_t *) hashbin_get_first(log); + while (discovery != NULL) { + /* Be sure to be one item ahead */ + curr = discovery; + discovery = (discovery_t *) hashbin_get_next(log); + + /* Test if it's time to expire this discovery */ + if ((curr->data.saddr == saddr) && + (force || + ((jiffies - curr->timestamp) > DISCOVERY_EXPIRE_TIMEOUT))) + { + /* Create buffer as needed. + * As this function get called a lot and most time + * we don't have anything to put in the log (we are + * quite picky), we can save a lot of overhead + * by not calling kmalloc. Jean II */ + if(buffer == NULL) { + /* Create the client specific buffer */ + n = HASHBIN_GET_SIZE(log); + buffer = kmalloc(n * sizeof(struct irda_device_info), GFP_ATOMIC); + if (buffer == NULL) { + spin_unlock_irqrestore(&log->hb_spinlock, flags); + return; + } + + } + + /* Copy discovery information */ + memcpy(&(buffer[i]), &(curr->data), + sizeof(discinfo_t)); + i++; + + /* Remove it from the log */ + curr = hashbin_remove_this(log, (irda_queue_t *) curr); + kfree(curr); + } + } + + /* Drop the spinlock before calling the higher layers, as + * we can't guarantee they won't call us back and create a + * deadlock. We will work on our own private data, so we + * don't care to be interrupted. - Jean II */ + spin_unlock_irqrestore(&log->hb_spinlock, flags); + + if(buffer == NULL) + return; + + /* Tell IrLMP and registered clients about it */ + irlmp_discovery_expiry(buffer, i); + + /* Free up our buffer */ + kfree(buffer); +} + +#if 0 +/* + * Function irlmp_dump_discoveries (log) + * + * Print out all discoveries in log + * + */ +void irlmp_dump_discoveries(hashbin_t *log) +{ + discovery_t *discovery; + + IRDA_ASSERT(log != NULL, return;); + + discovery = (discovery_t *) hashbin_get_first(log); + while (discovery != NULL) { + pr_debug("Discovery:\n"); + pr_debug(" daddr=%08x\n", discovery->data.daddr); + pr_debug(" saddr=%08x\n", discovery->data.saddr); + pr_debug(" nickname=%s\n", discovery->data.info); + + discovery = (discovery_t *) hashbin_get_next(log); + } +} +#endif + +/* + * Function irlmp_copy_discoveries (log, pn, mask) + * + * Copy all discoveries in a buffer + * + * This function implement a safe way for lmp clients to access the + * discovery log. The basic problem is that we don't want the log + * to change (add/remove) while the client is reading it. If the + * lmp client manipulate directly the hashbin, he is sure to get + * into troubles... + * The idea is that we copy all the current discovery log in a buffer + * which is specific to the client and pass this copy to him. As we + * do this operation with the spinlock grabbed, we are safe... + * Note : we don't want those clients to grab the spinlock, because + * we have no control on how long they will hold it... + * Note : we choose to copy the log in "struct irda_device_info" to + * save space... + * Note : the client must kfree himself() the log... + * Jean II + */ +struct irda_device_info *irlmp_copy_discoveries(hashbin_t *log, int *pn, + __u16 mask, int old_entries) +{ + discovery_t * discovery; + unsigned long flags; + discinfo_t * buffer = NULL; + int j_timeout = (sysctl_discovery_timeout * HZ); + int n; /* Size of the full log */ + int i = 0; /* How many we picked */ + + IRDA_ASSERT(pn != NULL, return NULL;); + IRDA_ASSERT(log != NULL, return NULL;); + + /* Save spin lock */ + spin_lock_irqsave(&log->hb_spinlock, flags); + + discovery = (discovery_t *) hashbin_get_first(log); + while (discovery != NULL) { + /* Mask out the ones we don't want : + * We want to match the discovery mask, and to get only + * the most recent one (unless we want old ones) */ + if ((get_unaligned((__u16 *)discovery->data.hints) & mask) && + ((old_entries) || + ((jiffies - discovery->firststamp) < j_timeout))) { + /* Create buffer as needed. + * As this function get called a lot and most time + * we don't have anything to put in the log (we are + * quite picky), we can save a lot of overhead + * by not calling kmalloc. Jean II */ + if(buffer == NULL) { + /* Create the client specific buffer */ + n = HASHBIN_GET_SIZE(log); + buffer = kmalloc(n * sizeof(struct irda_device_info), GFP_ATOMIC); + if (buffer == NULL) { + spin_unlock_irqrestore(&log->hb_spinlock, flags); + return NULL; + } + + } + + /* Copy discovery information */ + memcpy(&(buffer[i]), &(discovery->data), + sizeof(discinfo_t)); + i++; + } + discovery = (discovery_t *) hashbin_get_next(log); + } + + spin_unlock_irqrestore(&log->hb_spinlock, flags); + + /* Get the actual number of device in the buffer and return */ + *pn = i; + return buffer; +} + +#ifdef CONFIG_PROC_FS +static inline discovery_t *discovery_seq_idx(loff_t pos) + +{ + discovery_t *discovery; + + for (discovery = (discovery_t *) hashbin_get_first(irlmp->cachelog); + discovery != NULL; + discovery = (discovery_t *) hashbin_get_next(irlmp->cachelog)) { + if (pos-- == 0) + break; + } + + return discovery; +} + +static void *discovery_seq_start(struct seq_file *seq, loff_t *pos) +{ + spin_lock_irq(&irlmp->cachelog->hb_spinlock); + return *pos ? discovery_seq_idx(*pos - 1) : SEQ_START_TOKEN; +} + +static void *discovery_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + ++*pos; + return (v == SEQ_START_TOKEN) + ? (void *) hashbin_get_first(irlmp->cachelog) + : (void *) hashbin_get_next(irlmp->cachelog); +} + +static void discovery_seq_stop(struct seq_file *seq, void *v) +{ + spin_unlock_irq(&irlmp->cachelog->hb_spinlock); +} + +static int discovery_seq_show(struct seq_file *seq, void *v) +{ + if (v == SEQ_START_TOKEN) + seq_puts(seq, "IrLMP: Discovery log:\n\n"); + else { + const discovery_t *discovery = v; + + seq_printf(seq, "nickname: %s, hint: 0x%02x%02x", + discovery->data.info, + discovery->data.hints[0], + discovery->data.hints[1]); +#if 0 + if ( discovery->data.hints[0] & HINT_PNP) + seq_puts(seq, "PnP Compatible "); + if ( discovery->data.hints[0] & HINT_PDA) + seq_puts(seq, "PDA/Palmtop "); + if ( discovery->data.hints[0] & HINT_COMPUTER) + seq_puts(seq, "Computer "); + if ( discovery->data.hints[0] & HINT_PRINTER) + seq_puts(seq, "Printer "); + if ( discovery->data.hints[0] & HINT_MODEM) + seq_puts(seq, "Modem "); + if ( discovery->data.hints[0] & HINT_FAX) + seq_puts(seq, "Fax "); + if ( discovery->data.hints[0] & HINT_LAN) + seq_puts(seq, "LAN Access "); + + if ( discovery->data.hints[1] & HINT_TELEPHONY) + seq_puts(seq, "Telephony "); + if ( discovery->data.hints[1] & HINT_FILE_SERVER) + seq_puts(seq, "File Server "); + if ( discovery->data.hints[1] & HINT_COMM) + seq_puts(seq, "IrCOMM "); + if ( discovery->data.hints[1] & HINT_OBEX) + seq_puts(seq, "IrOBEX "); +#endif + seq_printf(seq,", saddr: 0x%08x, daddr: 0x%08x\n\n", + discovery->data.saddr, + discovery->data.daddr); + + seq_putc(seq, '\n'); + } + return 0; +} + +static const struct seq_operations discovery_seq_ops = { + .start = discovery_seq_start, + .next = discovery_seq_next, + .stop = discovery_seq_stop, + .show = discovery_seq_show, +}; + +static int discovery_seq_open(struct inode *inode, struct file *file) +{ + IRDA_ASSERT(irlmp != NULL, return -EINVAL;); + + return seq_open(file, &discovery_seq_ops); +} + +const struct file_operations discovery_seq_fops = { + .owner = THIS_MODULE, + .open = discovery_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; +#endif diff --git a/kernel/net/irda/ircomm/Kconfig b/kernel/net/irda/ircomm/Kconfig new file mode 100644 index 000000000..19492c170 --- /dev/null +++ b/kernel/net/irda/ircomm/Kconfig @@ -0,0 +1,12 @@ +config IRCOMM + tristate "IrCOMM protocol" + depends on IRDA && TTY + help + Say Y here if you want to build support for the IrCOMM protocol. + To compile it as modules, choose M here: the modules will be + called ircomm and ircomm_tty. + IrCOMM implements serial port emulation, and makes it possible to + use all existing applications that understands TTY's with an + infrared link. Thus you should be able to use application like PPP, + minicom and others. + diff --git a/kernel/net/irda/ircomm/Makefile b/kernel/net/irda/ircomm/Makefile new file mode 100644 index 000000000..ab23b5ba7 --- /dev/null +++ b/kernel/net/irda/ircomm/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the Linux IrDA IrCOMM protocol layer. +# + +obj-$(CONFIG_IRCOMM) += ircomm.o ircomm-tty.o + +ircomm-y := ircomm_core.o ircomm_event.o ircomm_lmp.o ircomm_ttp.o +ircomm-tty-y := ircomm_tty.o ircomm_tty_attach.o ircomm_tty_ioctl.o ircomm_param.o diff --git a/kernel/net/irda/ircomm/ircomm_core.c b/kernel/net/irda/ircomm/ircomm_core.c new file mode 100644 index 000000000..3af219545 --- /dev/null +++ b/kernel/net/irda/ircomm/ircomm_core.c @@ -0,0 +1,563 @@ +/********************************************************************* + * + * Filename: ircomm_core.c + * Version: 1.0 + * Description: IrCOMM service interface + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Sun Jun 6 20:37:34 1999 + * Modified at: Tue Dec 21 13:26:41 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1999 Dag Brattli, All Rights Reserved. + * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + ********************************************************************/ + +#include <linux/module.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/init.h> +#include <linux/slab.h> + +#include <net/irda/irda.h> +#include <net/irda/irmod.h> +#include <net/irda/irlmp.h> +#include <net/irda/iriap.h> +#include <net/irda/irttp.h> +#include <net/irda/irias_object.h> + +#include <net/irda/ircomm_event.h> +#include <net/irda/ircomm_lmp.h> +#include <net/irda/ircomm_ttp.h> +#include <net/irda/ircomm_param.h> +#include <net/irda/ircomm_core.h> + +static int __ircomm_close(struct ircomm_cb *self); +static void ircomm_control_indication(struct ircomm_cb *self, + struct sk_buff *skb, int clen); + +#ifdef CONFIG_PROC_FS +extern struct proc_dir_entry *proc_irda; +static int ircomm_seq_open(struct inode *, struct file *); + +static const struct file_operations ircomm_proc_fops = { + .owner = THIS_MODULE, + .open = ircomm_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; +#endif /* CONFIG_PROC_FS */ + +hashbin_t *ircomm = NULL; + +static int __init ircomm_init(void) +{ + ircomm = hashbin_new(HB_LOCK); + if (ircomm == NULL) { + net_err_ratelimited("%s(), can't allocate hashbin!\n", + __func__); + return -ENOMEM; + } + +#ifdef CONFIG_PROC_FS + { struct proc_dir_entry *ent; + ent = proc_create("ircomm", 0, proc_irda, &ircomm_proc_fops); + if (!ent) { + printk(KERN_ERR "ircomm_init: can't create /proc entry!\n"); + return -ENODEV; + } + } +#endif /* CONFIG_PROC_FS */ + + net_info_ratelimited("IrCOMM protocol (Dag Brattli)\n"); + + return 0; +} + +static void __exit ircomm_cleanup(void) +{ + hashbin_delete(ircomm, (FREE_FUNC) __ircomm_close); + +#ifdef CONFIG_PROC_FS + remove_proc_entry("ircomm", proc_irda); +#endif /* CONFIG_PROC_FS */ +} + +/* + * Function ircomm_open (client_notify) + * + * Start a new IrCOMM instance + * + */ +struct ircomm_cb *ircomm_open(notify_t *notify, __u8 service_type, int line) +{ + struct ircomm_cb *self = NULL; + int ret; + + pr_debug("%s(), service_type=0x%02x\n", __func__ , + service_type); + + IRDA_ASSERT(ircomm != NULL, return NULL;); + + self = kzalloc(sizeof(struct ircomm_cb), GFP_KERNEL); + if (self == NULL) + return NULL; + + self->notify = *notify; + self->magic = IRCOMM_MAGIC; + + /* Check if we should use IrLMP or IrTTP */ + if (service_type & IRCOMM_3_WIRE_RAW) { + self->flow_status = FLOW_START; + ret = ircomm_open_lsap(self); + } else + ret = ircomm_open_tsap(self); + + if (ret < 0) { + kfree(self); + return NULL; + } + + self->service_type = service_type; + self->line = line; + + hashbin_insert(ircomm, (irda_queue_t *) self, line, NULL); + + ircomm_next_state(self, IRCOMM_IDLE); + + return self; +} + +EXPORT_SYMBOL(ircomm_open); + +/* + * Function ircomm_close_instance (self) + * + * Remove IrCOMM instance + * + */ +static int __ircomm_close(struct ircomm_cb *self) +{ + /* Disconnect link if any */ + ircomm_do_event(self, IRCOMM_DISCONNECT_REQUEST, NULL, NULL); + + /* Remove TSAP */ + if (self->tsap) { + irttp_close_tsap(self->tsap); + self->tsap = NULL; + } + + /* Remove LSAP */ + if (self->lsap) { + irlmp_close_lsap(self->lsap); + self->lsap = NULL; + } + self->magic = 0; + + kfree(self); + + return 0; +} + +/* + * Function ircomm_close (self) + * + * Closes and removes the specified IrCOMM instance + * + */ +int ircomm_close(struct ircomm_cb *self) +{ + struct ircomm_cb *entry; + + IRDA_ASSERT(self != NULL, return -EIO;); + IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -EIO;); + + entry = hashbin_remove(ircomm, self->line, NULL); + + IRDA_ASSERT(entry == self, return -1;); + + return __ircomm_close(self); +} + +EXPORT_SYMBOL(ircomm_close); + +/* + * Function ircomm_connect_request (self, service_type) + * + * Impl. of this function is differ from one of the reference. This + * function does discovery as well as sending connect request + * + */ +int ircomm_connect_request(struct ircomm_cb *self, __u8 dlsap_sel, + __u32 saddr, __u32 daddr, struct sk_buff *skb, + __u8 service_type) +{ + struct ircomm_info info; + int ret; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -1;); + + self->service_type= service_type; + + info.dlsap_sel = dlsap_sel; + info.saddr = saddr; + info.daddr = daddr; + + ret = ircomm_do_event(self, IRCOMM_CONNECT_REQUEST, skb, &info); + + return ret; +} + +EXPORT_SYMBOL(ircomm_connect_request); + +/* + * Function ircomm_connect_indication (self, qos, skb) + * + * Notify user layer about the incoming connection + * + */ +void ircomm_connect_indication(struct ircomm_cb *self, struct sk_buff *skb, + struct ircomm_info *info) +{ + /* + * If there are any data hiding in the control channel, we must + * deliver it first. The side effect is that the control channel + * will be removed from the skb + */ + if (self->notify.connect_indication) + self->notify.connect_indication(self->notify.instance, self, + info->qos, info->max_data_size, + info->max_header_size, skb); + else { + pr_debug("%s(), missing handler\n", __func__); + } +} + +/* + * Function ircomm_connect_response (self, userdata, max_sdu_size) + * + * User accepts connection + * + */ +int ircomm_connect_response(struct ircomm_cb *self, struct sk_buff *userdata) +{ + int ret; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -1;); + + ret = ircomm_do_event(self, IRCOMM_CONNECT_RESPONSE, userdata, NULL); + + return ret; +} + +EXPORT_SYMBOL(ircomm_connect_response); + +/* + * Function connect_confirm (self, skb) + * + * Notify user layer that the link is now connected + * + */ +void ircomm_connect_confirm(struct ircomm_cb *self, struct sk_buff *skb, + struct ircomm_info *info) +{ + if (self->notify.connect_confirm ) + self->notify.connect_confirm(self->notify.instance, + self, info->qos, + info->max_data_size, + info->max_header_size, skb); + else { + pr_debug("%s(), missing handler\n", __func__); + } +} + +/* + * Function ircomm_data_request (self, userdata) + * + * Send IrCOMM data to peer device + * + */ +int ircomm_data_request(struct ircomm_cb *self, struct sk_buff *skb) +{ + int ret; + + IRDA_ASSERT(self != NULL, return -EFAULT;); + IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -EFAULT;); + IRDA_ASSERT(skb != NULL, return -EFAULT;); + + ret = ircomm_do_event(self, IRCOMM_DATA_REQUEST, skb, NULL); + + return ret; +} + +EXPORT_SYMBOL(ircomm_data_request); + +/* + * Function ircomm_data_indication (self, skb) + * + * Data arrived, so deliver it to user + * + */ +void ircomm_data_indication(struct ircomm_cb *self, struct sk_buff *skb) +{ + IRDA_ASSERT(skb->len > 0, return;); + + if (self->notify.data_indication) + self->notify.data_indication(self->notify.instance, self, skb); + else { + pr_debug("%s(), missing handler\n", __func__); + } +} + +/* + * Function ircomm_process_data (self, skb) + * + * Data arrived which may contain control channel data + * + */ +void ircomm_process_data(struct ircomm_cb *self, struct sk_buff *skb) +{ + int clen; + + IRDA_ASSERT(skb->len > 0, return;); + + clen = skb->data[0]; + + /* + * Input validation check: a stir4200/mcp2150 combinations sometimes + * results in frames with clen > remaining packet size. These are + * illegal; if we throw away just this frame then it seems to carry on + * fine + */ + if (unlikely(skb->len < (clen + 1))) { + pr_debug("%s() throwing away illegal frame\n", + __func__); + return; + } + + /* + * If there are any data hiding in the control channel, we must + * deliver it first. The side effect is that the control channel + * will be removed from the skb + */ + if (clen > 0) + ircomm_control_indication(self, skb, clen); + + /* Remove control channel from data channel */ + skb_pull(skb, clen+1); + + if (skb->len) + ircomm_data_indication(self, skb); + else { + pr_debug("%s(), data was control info only!\n", + __func__); + } +} + +/* + * Function ircomm_control_request (self, params) + * + * Send control data to peer device + * + */ +int ircomm_control_request(struct ircomm_cb *self, struct sk_buff *skb) +{ + int ret; + + IRDA_ASSERT(self != NULL, return -EFAULT;); + IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -EFAULT;); + IRDA_ASSERT(skb != NULL, return -EFAULT;); + + ret = ircomm_do_event(self, IRCOMM_CONTROL_REQUEST, skb, NULL); + + return ret; +} + +EXPORT_SYMBOL(ircomm_control_request); + +/* + * Function ircomm_control_indication (self, skb) + * + * Data has arrived on the control channel + * + */ +static void ircomm_control_indication(struct ircomm_cb *self, + struct sk_buff *skb, int clen) +{ + /* Use udata for delivering data on the control channel */ + if (self->notify.udata_indication) { + struct sk_buff *ctrl_skb; + + /* We don't own the skb, so clone it */ + ctrl_skb = skb_clone(skb, GFP_ATOMIC); + if (!ctrl_skb) + return; + + /* Remove data channel from control channel */ + skb_trim(ctrl_skb, clen+1); + + self->notify.udata_indication(self->notify.instance, self, + ctrl_skb); + + /* Drop reference count - + * see ircomm_tty_control_indication(). */ + dev_kfree_skb(ctrl_skb); + } else { + pr_debug("%s(), missing handler\n", __func__); + } +} + +/* + * Function ircomm_disconnect_request (self, userdata, priority) + * + * User layer wants to disconnect the IrCOMM connection + * + */ +int ircomm_disconnect_request(struct ircomm_cb *self, struct sk_buff *userdata) +{ + struct ircomm_info info; + int ret; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -1;); + + ret = ircomm_do_event(self, IRCOMM_DISCONNECT_REQUEST, userdata, + &info); + return ret; +} + +EXPORT_SYMBOL(ircomm_disconnect_request); + +/* + * Function disconnect_indication (self, skb) + * + * Tell user that the link has been disconnected + * + */ +void ircomm_disconnect_indication(struct ircomm_cb *self, struct sk_buff *skb, + struct ircomm_info *info) +{ + IRDA_ASSERT(info != NULL, return;); + + if (self->notify.disconnect_indication) { + self->notify.disconnect_indication(self->notify.instance, self, + info->reason, skb); + } else { + pr_debug("%s(), missing handler\n", __func__); + } +} + +/* + * Function ircomm_flow_request (self, flow) + * + * + * + */ +void ircomm_flow_request(struct ircomm_cb *self, LOCAL_FLOW flow) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;); + + if (self->service_type == IRCOMM_3_WIRE_RAW) + return; + + irttp_flow_request(self->tsap, flow); +} + +EXPORT_SYMBOL(ircomm_flow_request); + +#ifdef CONFIG_PROC_FS +static void *ircomm_seq_start(struct seq_file *seq, loff_t *pos) +{ + struct ircomm_cb *self; + loff_t off = 0; + + spin_lock_irq(&ircomm->hb_spinlock); + + for (self = (struct ircomm_cb *) hashbin_get_first(ircomm); + self != NULL; + self = (struct ircomm_cb *) hashbin_get_next(ircomm)) { + if (off++ == *pos) + break; + + } + return self; +} + +static void *ircomm_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + ++*pos; + + return (void *) hashbin_get_next(ircomm); +} + +static void ircomm_seq_stop(struct seq_file *seq, void *v) +{ + spin_unlock_irq(&ircomm->hb_spinlock); +} + +static int ircomm_seq_show(struct seq_file *seq, void *v) +{ + const struct ircomm_cb *self = v; + + IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -EINVAL; ); + + if(self->line < 0x10) + seq_printf(seq, "ircomm%d", self->line); + else + seq_printf(seq, "irlpt%d", self->line - 0x10); + + seq_printf(seq, + " state: %s, slsap_sel: %#02x, dlsap_sel: %#02x, mode:", + ircomm_state[ self->state], + self->slsap_sel, self->dlsap_sel); + + if(self->service_type & IRCOMM_3_WIRE_RAW) + seq_printf(seq, " 3-wire-raw"); + if(self->service_type & IRCOMM_3_WIRE) + seq_printf(seq, " 3-wire"); + if(self->service_type & IRCOMM_9_WIRE) + seq_printf(seq, " 9-wire"); + if(self->service_type & IRCOMM_CENTRONICS) + seq_printf(seq, " Centronics"); + seq_putc(seq, '\n'); + + return 0; +} + +static const struct seq_operations ircomm_seq_ops = { + .start = ircomm_seq_start, + .next = ircomm_seq_next, + .stop = ircomm_seq_stop, + .show = ircomm_seq_show, +}; + +static int ircomm_seq_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &ircomm_seq_ops); +} +#endif /* CONFIG_PROC_FS */ + +MODULE_AUTHOR("Dag Brattli <dag@brattli.net>"); +MODULE_DESCRIPTION("IrCOMM protocol"); +MODULE_LICENSE("GPL"); + +module_init(ircomm_init); +module_exit(ircomm_cleanup); diff --git a/kernel/net/irda/ircomm/ircomm_event.c b/kernel/net/irda/ircomm/ircomm_event.c new file mode 100644 index 000000000..b0730ac9f --- /dev/null +++ b/kernel/net/irda/ircomm/ircomm_event.c @@ -0,0 +1,246 @@ +/********************************************************************* + * + * Filename: ircomm_event.c + * Version: 1.0 + * Description: IrCOMM layer state machine + * Status: Stable + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Sun Jun 6 20:33:11 1999 + * Modified at: Sun Dec 12 13:44:32 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1999 Dag Brattli, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + ********************************************************************/ + +#include <linux/proc_fs.h> +#include <linux/init.h> + +#include <net/irda/irda.h> +#include <net/irda/irlmp.h> +#include <net/irda/iriap.h> +#include <net/irda/irttp.h> +#include <net/irda/irias_object.h> + +#include <net/irda/ircomm_core.h> +#include <net/irda/ircomm_event.h> + +static int ircomm_state_idle(struct ircomm_cb *self, IRCOMM_EVENT event, + struct sk_buff *skb, struct ircomm_info *info); +static int ircomm_state_waiti(struct ircomm_cb *self, IRCOMM_EVENT event, + struct sk_buff *skb, struct ircomm_info *info); +static int ircomm_state_waitr(struct ircomm_cb *self, IRCOMM_EVENT event, + struct sk_buff *skb, struct ircomm_info *info); +static int ircomm_state_conn(struct ircomm_cb *self, IRCOMM_EVENT event, + struct sk_buff *skb, struct ircomm_info *info); + +const char *const ircomm_state[] = { + "IRCOMM_IDLE", + "IRCOMM_WAITI", + "IRCOMM_WAITR", + "IRCOMM_CONN", +}; + +static const char *const ircomm_event[] __maybe_unused = { + "IRCOMM_CONNECT_REQUEST", + "IRCOMM_CONNECT_RESPONSE", + "IRCOMM_TTP_CONNECT_INDICATION", + "IRCOMM_LMP_CONNECT_INDICATION", + "IRCOMM_TTP_CONNECT_CONFIRM", + "IRCOMM_LMP_CONNECT_CONFIRM", + + "IRCOMM_LMP_DISCONNECT_INDICATION", + "IRCOMM_TTP_DISCONNECT_INDICATION", + "IRCOMM_DISCONNECT_REQUEST", + + "IRCOMM_TTP_DATA_INDICATION", + "IRCOMM_LMP_DATA_INDICATION", + "IRCOMM_DATA_REQUEST", + "IRCOMM_CONTROL_REQUEST", + "IRCOMM_CONTROL_INDICATION", +}; + +static int (*state[])(struct ircomm_cb *self, IRCOMM_EVENT event, + struct sk_buff *skb, struct ircomm_info *info) = +{ + ircomm_state_idle, + ircomm_state_waiti, + ircomm_state_waitr, + ircomm_state_conn, +}; + +/* + * Function ircomm_state_idle (self, event, skb) + * + * IrCOMM is currently idle + * + */ +static int ircomm_state_idle(struct ircomm_cb *self, IRCOMM_EVENT event, + struct sk_buff *skb, struct ircomm_info *info) +{ + int ret = 0; + + switch (event) { + case IRCOMM_CONNECT_REQUEST: + ircomm_next_state(self, IRCOMM_WAITI); + ret = self->issue.connect_request(self, skb, info); + break; + case IRCOMM_TTP_CONNECT_INDICATION: + case IRCOMM_LMP_CONNECT_INDICATION: + ircomm_next_state(self, IRCOMM_WAITR); + ircomm_connect_indication(self, skb, info); + break; + default: + pr_debug("%s(), unknown event: %s\n", __func__ , + ircomm_event[event]); + ret = -EINVAL; + } + return ret; +} + +/* + * Function ircomm_state_waiti (self, event, skb) + * + * The IrCOMM user has requested an IrCOMM connection to the remote + * device and is awaiting confirmation + */ +static int ircomm_state_waiti(struct ircomm_cb *self, IRCOMM_EVENT event, + struct sk_buff *skb, struct ircomm_info *info) +{ + int ret = 0; + + switch (event) { + case IRCOMM_TTP_CONNECT_CONFIRM: + case IRCOMM_LMP_CONNECT_CONFIRM: + ircomm_next_state(self, IRCOMM_CONN); + ircomm_connect_confirm(self, skb, info); + break; + case IRCOMM_TTP_DISCONNECT_INDICATION: + case IRCOMM_LMP_DISCONNECT_INDICATION: + ircomm_next_state(self, IRCOMM_IDLE); + ircomm_disconnect_indication(self, skb, info); + break; + default: + pr_debug("%s(), unknown event: %s\n", __func__ , + ircomm_event[event]); + ret = -EINVAL; + } + return ret; +} + +/* + * Function ircomm_state_waitr (self, event, skb) + * + * IrCOMM has received an incoming connection request and is awaiting + * response from the user + */ +static int ircomm_state_waitr(struct ircomm_cb *self, IRCOMM_EVENT event, + struct sk_buff *skb, struct ircomm_info *info) +{ + int ret = 0; + + switch (event) { + case IRCOMM_CONNECT_RESPONSE: + ircomm_next_state(self, IRCOMM_CONN); + ret = self->issue.connect_response(self, skb); + break; + case IRCOMM_DISCONNECT_REQUEST: + ircomm_next_state(self, IRCOMM_IDLE); + ret = self->issue.disconnect_request(self, skb, info); + break; + case IRCOMM_TTP_DISCONNECT_INDICATION: + case IRCOMM_LMP_DISCONNECT_INDICATION: + ircomm_next_state(self, IRCOMM_IDLE); + ircomm_disconnect_indication(self, skb, info); + break; + default: + pr_debug("%s(), unknown event = %s\n", __func__ , + ircomm_event[event]); + ret = -EINVAL; + } + return ret; +} + +/* + * Function ircomm_state_conn (self, event, skb) + * + * IrCOMM is connected to the peer IrCOMM device + * + */ +static int ircomm_state_conn(struct ircomm_cb *self, IRCOMM_EVENT event, + struct sk_buff *skb, struct ircomm_info *info) +{ + int ret = 0; + + switch (event) { + case IRCOMM_DATA_REQUEST: + ret = self->issue.data_request(self, skb, 0); + break; + case IRCOMM_TTP_DATA_INDICATION: + ircomm_process_data(self, skb); + break; + case IRCOMM_LMP_DATA_INDICATION: + ircomm_data_indication(self, skb); + break; + case IRCOMM_CONTROL_REQUEST: + /* Just send a separate frame for now */ + ret = self->issue.data_request(self, skb, skb->len); + break; + case IRCOMM_TTP_DISCONNECT_INDICATION: + case IRCOMM_LMP_DISCONNECT_INDICATION: + ircomm_next_state(self, IRCOMM_IDLE); + ircomm_disconnect_indication(self, skb, info); + break; + case IRCOMM_DISCONNECT_REQUEST: + ircomm_next_state(self, IRCOMM_IDLE); + ret = self->issue.disconnect_request(self, skb, info); + break; + default: + pr_debug("%s(), unknown event = %s\n", __func__ , + ircomm_event[event]); + ret = -EINVAL; + } + return ret; +} + +/* + * Function ircomm_do_event (self, event, skb) + * + * Process event + * + */ +int ircomm_do_event(struct ircomm_cb *self, IRCOMM_EVENT event, + struct sk_buff *skb, struct ircomm_info *info) +{ + pr_debug("%s: state=%s, event=%s\n", __func__ , + ircomm_state[self->state], ircomm_event[event]); + + return (*state[self->state])(self, event, skb, info); +} + +/* + * Function ircomm_next_state (self, state) + * + * Switch state + * + */ +void ircomm_next_state(struct ircomm_cb *self, IRCOMM_STATE state) +{ + self->state = state; + + pr_debug("%s: next state=%s, service type=%d\n", __func__ , + ircomm_state[self->state], self->service_type); +} diff --git a/kernel/net/irda/ircomm/ircomm_lmp.c b/kernel/net/irda/ircomm/ircomm_lmp.c new file mode 100644 index 000000000..e4cc847bb --- /dev/null +++ b/kernel/net/irda/ircomm/ircomm_lmp.c @@ -0,0 +1,350 @@ +/********************************************************************* + * + * Filename: ircomm_lmp.c + * Version: 1.0 + * Description: Interface between IrCOMM and IrLMP + * Status: Stable + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Sun Jun 6 20:48:27 1999 + * Modified at: Sun Dec 12 13:44:17 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * Sources: Previous IrLPT work by Thomas Davis + * + * Copyright (c) 1999 Dag Brattli, All Rights Reserved. + * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + ********************************************************************/ + +#include <linux/init.h> +#include <linux/gfp.h> + +#include <net/irda/irda.h> +#include <net/irda/irlmp.h> +#include <net/irda/iriap.h> +#include <net/irda/irda_device.h> /* struct irda_skb_cb */ + +#include <net/irda/ircomm_event.h> +#include <net/irda/ircomm_lmp.h> + + +/* + * Function ircomm_lmp_connect_request (self, userdata) + * + * + * + */ +static int ircomm_lmp_connect_request(struct ircomm_cb *self, + struct sk_buff *userdata, + struct ircomm_info *info) +{ + int ret = 0; + + /* Don't forget to refcount it - should be NULL anyway */ + if(userdata) + skb_get(userdata); + + ret = irlmp_connect_request(self->lsap, info->dlsap_sel, + info->saddr, info->daddr, NULL, userdata); + return ret; +} + +/* + * Function ircomm_lmp_connect_response (self, skb) + * + * + * + */ +static int ircomm_lmp_connect_response(struct ircomm_cb *self, + struct sk_buff *userdata) +{ + struct sk_buff *tx_skb; + + /* Any userdata supplied? */ + if (userdata == NULL) { + tx_skb = alloc_skb(LMP_MAX_HEADER, GFP_ATOMIC); + if (!tx_skb) + return -ENOMEM; + + /* Reserve space for MUX and LAP header */ + skb_reserve(tx_skb, LMP_MAX_HEADER); + } else { + /* + * Check that the client has reserved enough space for + * headers + */ + IRDA_ASSERT(skb_headroom(userdata) >= LMP_MAX_HEADER, + return -1;); + + /* Don't forget to refcount it - should be NULL anyway */ + skb_get(userdata); + tx_skb = userdata; + } + + return irlmp_connect_response(self->lsap, tx_skb); +} + +static int ircomm_lmp_disconnect_request(struct ircomm_cb *self, + struct sk_buff *userdata, + struct ircomm_info *info) +{ + struct sk_buff *tx_skb; + int ret; + + if (!userdata) { + tx_skb = alloc_skb(LMP_MAX_HEADER, GFP_ATOMIC); + if (!tx_skb) + return -ENOMEM; + + /* Reserve space for MUX and LAP header */ + skb_reserve(tx_skb, LMP_MAX_HEADER); + userdata = tx_skb; + } else { + /* Don't forget to refcount it - should be NULL anyway */ + skb_get(userdata); + } + + ret = irlmp_disconnect_request(self->lsap, userdata); + + return ret; +} + +/* + * Function ircomm_lmp_flow_control (skb) + * + * This function is called when a data frame we have sent to IrLAP has + * been deallocated. We do this to make sure we don't flood IrLAP with + * frames, since we are not using the IrTTP flow control mechanism + */ +static void ircomm_lmp_flow_control(struct sk_buff *skb) +{ + struct irda_skb_cb *cb; + struct ircomm_cb *self; + int line; + + IRDA_ASSERT(skb != NULL, return;); + + cb = (struct irda_skb_cb *) skb->cb; + + line = cb->line; + + self = (struct ircomm_cb *) hashbin_lock_find(ircomm, line, NULL); + if (!self) { + pr_debug("%s(), didn't find myself\n", __func__); + return; + } + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;); + + self->pkt_count--; + + if ((self->pkt_count < 2) && (self->flow_status == FLOW_STOP)) { + pr_debug("%s(), asking TTY to start again!\n", __func__); + self->flow_status = FLOW_START; + if (self->notify.flow_indication) + self->notify.flow_indication(self->notify.instance, + self, FLOW_START); + } +} + +/* + * Function ircomm_lmp_data_request (self, userdata) + * + * Send data frame to peer device + * + */ +static int ircomm_lmp_data_request(struct ircomm_cb *self, + struct sk_buff *skb, + int not_used) +{ + struct irda_skb_cb *cb; + int ret; + + IRDA_ASSERT(skb != NULL, return -1;); + + cb = (struct irda_skb_cb *) skb->cb; + + cb->line = self->line; + + pr_debug("%s(), sending frame\n", __func__); + + /* Don't forget to refcount it - see ircomm_tty_do_softint() */ + skb_get(skb); + + skb_orphan(skb); + skb->destructor = ircomm_lmp_flow_control; + + if ((self->pkt_count++ > 7) && (self->flow_status == FLOW_START)) { + pr_debug("%s(), asking TTY to slow down!\n", __func__); + self->flow_status = FLOW_STOP; + if (self->notify.flow_indication) + self->notify.flow_indication(self->notify.instance, + self, FLOW_STOP); + } + ret = irlmp_data_request(self->lsap, skb); + if (ret) { + net_err_ratelimited("%s(), failed\n", __func__); + /* irlmp_data_request already free the packet */ + } + + return ret; +} + +/* + * Function ircomm_lmp_data_indication (instance, sap, skb) + * + * Incoming data which we must deliver to the state machine, to check + * we are still connected. + */ +static int ircomm_lmp_data_indication(void *instance, void *sap, + struct sk_buff *skb) +{ + struct ircomm_cb *self = (struct ircomm_cb *) instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -1;); + IRDA_ASSERT(skb != NULL, return -1;); + + ircomm_do_event(self, IRCOMM_LMP_DATA_INDICATION, skb, NULL); + + /* Drop reference count - see ircomm_tty_data_indication(). */ + dev_kfree_skb(skb); + + return 0; +} + +/* + * Function ircomm_lmp_connect_confirm (instance, sap, qos, max_sdu_size, + * max_header_size, skb) + * + * Connection has been confirmed by peer device + * + */ +static void ircomm_lmp_connect_confirm(void *instance, void *sap, + struct qos_info *qos, + __u32 max_seg_size, + __u8 max_header_size, + struct sk_buff *skb) +{ + struct ircomm_cb *self = (struct ircomm_cb *) instance; + struct ircomm_info info; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;); + IRDA_ASSERT(skb != NULL, return;); + IRDA_ASSERT(qos != NULL, return;); + + info.max_data_size = max_seg_size; + info.max_header_size = max_header_size; + info.qos = qos; + + ircomm_do_event(self, IRCOMM_LMP_CONNECT_CONFIRM, skb, &info); + + /* Drop reference count - see ircomm_tty_connect_confirm(). */ + dev_kfree_skb(skb); +} + +/* + * Function ircomm_lmp_connect_indication (instance, sap, qos, max_sdu_size, + * max_header_size, skb) + * + * Peer device wants to make a connection with us + * + */ +static void ircomm_lmp_connect_indication(void *instance, void *sap, + struct qos_info *qos, + __u32 max_seg_size, + __u8 max_header_size, + struct sk_buff *skb) +{ + struct ircomm_cb *self = (struct ircomm_cb *)instance; + struct ircomm_info info; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;); + IRDA_ASSERT(skb != NULL, return;); + IRDA_ASSERT(qos != NULL, return;); + + info.max_data_size = max_seg_size; + info.max_header_size = max_header_size; + info.qos = qos; + + ircomm_do_event(self, IRCOMM_LMP_CONNECT_INDICATION, skb, &info); + + /* Drop reference count - see ircomm_tty_connect_indication(). */ + dev_kfree_skb(skb); +} + +/* + * Function ircomm_lmp_disconnect_indication (instance, sap, reason, skb) + * + * Peer device has closed the connection, or the link went down for some + * other reason + */ +static void ircomm_lmp_disconnect_indication(void *instance, void *sap, + LM_REASON reason, + struct sk_buff *skb) +{ + struct ircomm_cb *self = (struct ircomm_cb *) instance; + struct ircomm_info info; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;); + + info.reason = reason; + + ircomm_do_event(self, IRCOMM_LMP_DISCONNECT_INDICATION, skb, &info); + + /* Drop reference count - see ircomm_tty_disconnect_indication(). */ + if(skb) + dev_kfree_skb(skb); +} +/* + * Function ircomm_open_lsap (self) + * + * Open LSAP. This function will only be used when using "raw" services + * + */ +int ircomm_open_lsap(struct ircomm_cb *self) +{ + notify_t notify; + + /* Register callbacks */ + irda_notify_init(¬ify); + notify.data_indication = ircomm_lmp_data_indication; + notify.connect_confirm = ircomm_lmp_connect_confirm; + notify.connect_indication = ircomm_lmp_connect_indication; + notify.disconnect_indication = ircomm_lmp_disconnect_indication; + notify.instance = self; + strlcpy(notify.name, "IrCOMM", sizeof(notify.name)); + + self->lsap = irlmp_open_lsap(LSAP_ANY, ¬ify, 0); + if (!self->lsap) { + pr_debug("%sfailed to allocate tsap\n", __func__); + return -1; + } + self->slsap_sel = self->lsap->slsap_sel; + + /* + * Initialize the call-table for issuing commands + */ + self->issue.data_request = ircomm_lmp_data_request; + self->issue.connect_request = ircomm_lmp_connect_request; + self->issue.connect_response = ircomm_lmp_connect_response; + self->issue.disconnect_request = ircomm_lmp_disconnect_request; + + return 0; +} diff --git a/kernel/net/irda/ircomm/ircomm_param.c b/kernel/net/irda/ircomm/ircomm_param.c new file mode 100644 index 000000000..3c4caa60c --- /dev/null +++ b/kernel/net/irda/ircomm/ircomm_param.c @@ -0,0 +1,502 @@ +/********************************************************************* + * + * Filename: ircomm_param.c + * Version: 1.0 + * Description: Parameter handling for the IrCOMM protocol + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Mon Jun 7 10:25:11 1999 + * Modified at: Sun Jan 30 14:32:03 2000 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + ********************************************************************/ + +#include <linux/gfp.h> +#include <linux/workqueue.h> +#include <linux/interrupt.h> + +#include <net/irda/irda.h> +#include <net/irda/parameters.h> + +#include <net/irda/ircomm_core.h> +#include <net/irda/ircomm_tty_attach.h> +#include <net/irda/ircomm_tty.h> + +#include <net/irda/ircomm_param.h> + +static int ircomm_param_service_type(void *instance, irda_param_t *param, + int get); +static int ircomm_param_port_type(void *instance, irda_param_t *param, + int get); +static int ircomm_param_port_name(void *instance, irda_param_t *param, + int get); +static int ircomm_param_service_type(void *instance, irda_param_t *param, + int get); +static int ircomm_param_data_rate(void *instance, irda_param_t *param, + int get); +static int ircomm_param_data_format(void *instance, irda_param_t *param, + int get); +static int ircomm_param_flow_control(void *instance, irda_param_t *param, + int get); +static int ircomm_param_xon_xoff(void *instance, irda_param_t *param, int get); +static int ircomm_param_enq_ack(void *instance, irda_param_t *param, int get); +static int ircomm_param_line_status(void *instance, irda_param_t *param, + int get); +static int ircomm_param_dte(void *instance, irda_param_t *param, int get); +static int ircomm_param_dce(void *instance, irda_param_t *param, int get); +static int ircomm_param_poll(void *instance, irda_param_t *param, int get); + +static const pi_minor_info_t pi_minor_call_table_common[] = { + { ircomm_param_service_type, PV_INT_8_BITS }, + { ircomm_param_port_type, PV_INT_8_BITS }, + { ircomm_param_port_name, PV_STRING } +}; +static const pi_minor_info_t pi_minor_call_table_non_raw[] = { + { ircomm_param_data_rate, PV_INT_32_BITS | PV_BIG_ENDIAN }, + { ircomm_param_data_format, PV_INT_8_BITS }, + { ircomm_param_flow_control, PV_INT_8_BITS }, + { ircomm_param_xon_xoff, PV_INT_16_BITS }, + { ircomm_param_enq_ack, PV_INT_16_BITS }, + { ircomm_param_line_status, PV_INT_8_BITS } +}; +static const pi_minor_info_t pi_minor_call_table_9_wire[] = { + { ircomm_param_dte, PV_INT_8_BITS }, + { ircomm_param_dce, PV_INT_8_BITS }, + { ircomm_param_poll, PV_NO_VALUE }, +}; + +static const pi_major_info_t pi_major_call_table[] = { + { pi_minor_call_table_common, 3 }, + { pi_minor_call_table_non_raw, 6 }, + { pi_minor_call_table_9_wire, 3 } +/* { pi_minor_call_table_centronics } */ +}; + +pi_param_info_t ircomm_param_info = { pi_major_call_table, 3, 0x0f, 4 }; + +/* + * Function ircomm_param_request (self, pi, flush) + * + * Queue a parameter for the control channel + * + */ +int ircomm_param_request(struct ircomm_tty_cb *self, __u8 pi, int flush) +{ + unsigned long flags; + struct sk_buff *skb; + int count; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + + /* Make sure we don't send parameters for raw mode */ + if (self->service_type == IRCOMM_3_WIRE_RAW) + return 0; + + spin_lock_irqsave(&self->spinlock, flags); + + skb = self->ctrl_skb; + if (!skb) { + skb = alloc_skb(256, GFP_ATOMIC); + if (!skb) { + spin_unlock_irqrestore(&self->spinlock, flags); + return -ENOMEM; + } + + skb_reserve(skb, self->max_header_size); + self->ctrl_skb = skb; + } + /* + * Inserting is a little bit tricky since we don't know how much + * room we will need. But this should hopefully work OK + */ + count = irda_param_insert(self, pi, skb_tail_pointer(skb), + skb_tailroom(skb), &ircomm_param_info); + if (count < 0) { + net_warn_ratelimited("%s(), no room for parameter!\n", + __func__); + spin_unlock_irqrestore(&self->spinlock, flags); + return -1; + } + skb_put(skb, count); + + spin_unlock_irqrestore(&self->spinlock, flags); + + pr_debug("%s(), skb->len=%d\n", __func__ , skb->len); + + if (flush) { + /* ircomm_tty_do_softint will take care of the rest */ + schedule_work(&self->tqueue); + } + + return count; +} + +/* + * Function ircomm_param_service_type (self, buf, len) + * + * Handle service type, this function will both be called after the LM-IAS + * query and then the remote device sends its initial parameters + * + */ +static int ircomm_param_service_type(void *instance, irda_param_t *param, + int get) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; + __u8 service_type = (__u8) param->pv.i; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + + if (get) { + param->pv.i = self->settings.service_type; + return 0; + } + + /* Find all common service types */ + service_type &= self->service_type; + if (!service_type) { + pr_debug("%s(), No common service type to use!\n", __func__); + return -1; + } + pr_debug("%s(), services in common=%02x\n", __func__ , + service_type); + + /* + * Now choose a preferred service type of those available + */ + if (service_type & IRCOMM_CENTRONICS) + self->settings.service_type = IRCOMM_CENTRONICS; + else if (service_type & IRCOMM_9_WIRE) + self->settings.service_type = IRCOMM_9_WIRE; + else if (service_type & IRCOMM_3_WIRE) + self->settings.service_type = IRCOMM_3_WIRE; + else if (service_type & IRCOMM_3_WIRE_RAW) + self->settings.service_type = IRCOMM_3_WIRE_RAW; + + pr_debug("%s(), resulting service type=0x%02x\n", __func__ , + self->settings.service_type); + + /* + * Now the line is ready for some communication. Check if we are a + * server, and send over some initial parameters. + * Client do it in ircomm_tty_state_setup(). + * Note : we may get called from ircomm_tty_getvalue_confirm(), + * therefore before we even have open any socket. And self->client + * is initialised to TRUE only later. So, we check if the link is + * really initialised. - Jean II + */ + if ((self->max_header_size != IRCOMM_TTY_HDR_UNINITIALISED) && + (!self->client) && + (self->settings.service_type != IRCOMM_3_WIRE_RAW)) + { + /* Init connection */ + ircomm_tty_send_initial_parameters(self); + ircomm_tty_link_established(self); + } + + return 0; +} + +/* + * Function ircomm_param_port_type (self, param) + * + * The port type parameter tells if the devices are serial or parallel. + * Since we only advertise serial service, this parameter should only + * be equal to IRCOMM_SERIAL. + */ +static int ircomm_param_port_type(void *instance, irda_param_t *param, int get) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + + if (get) + param->pv.i = IRCOMM_SERIAL; + else { + self->settings.port_type = (__u8) param->pv.i; + + pr_debug("%s(), port type=%d\n", __func__ , + self->settings.port_type); + } + return 0; +} + +/* + * Function ircomm_param_port_name (self, param) + * + * Exchange port name + * + */ +static int ircomm_param_port_name(void *instance, irda_param_t *param, int get) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + + if (get) { + pr_debug("%s(), not imp!\n", __func__); + } else { + pr_debug("%s(), port-name=%s\n", __func__ , param->pv.c); + strncpy(self->settings.port_name, param->pv.c, 32); + } + + return 0; +} + +/* + * Function ircomm_param_data_rate (self, param) + * + * Exchange data rate to be used in this settings + * + */ +static int ircomm_param_data_rate(void *instance, irda_param_t *param, int get) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + + if (get) + param->pv.i = self->settings.data_rate; + else + self->settings.data_rate = param->pv.i; + + pr_debug("%s(), data rate = %d\n", __func__ , param->pv.i); + + return 0; +} + +/* + * Function ircomm_param_data_format (self, param) + * + * Exchange data format to be used in this settings + * + */ +static int ircomm_param_data_format(void *instance, irda_param_t *param, + int get) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + + if (get) + param->pv.i = self->settings.data_format; + else + self->settings.data_format = (__u8) param->pv.i; + + return 0; +} + +/* + * Function ircomm_param_flow_control (self, param) + * + * Exchange flow control settings to be used in this settings + * + */ +static int ircomm_param_flow_control(void *instance, irda_param_t *param, + int get) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + + if (get) + param->pv.i = self->settings.flow_control; + else + self->settings.flow_control = (__u8) param->pv.i; + + pr_debug("%s(), flow control = 0x%02x\n", __func__ , (__u8)param->pv.i); + + return 0; +} + +/* + * Function ircomm_param_xon_xoff (self, param) + * + * Exchange XON/XOFF characters + * + */ +static int ircomm_param_xon_xoff(void *instance, irda_param_t *param, int get) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + + if (get) { + param->pv.i = self->settings.xonxoff[0]; + param->pv.i |= self->settings.xonxoff[1] << 8; + } else { + self->settings.xonxoff[0] = (__u16) param->pv.i & 0xff; + self->settings.xonxoff[1] = (__u16) param->pv.i >> 8; + } + + pr_debug("%s(), XON/XOFF = 0x%02x,0x%02x\n", __func__ , + param->pv.i & 0xff, param->pv.i >> 8); + + return 0; +} + +/* + * Function ircomm_param_enq_ack (self, param) + * + * Exchange ENQ/ACK characters + * + */ +static int ircomm_param_enq_ack(void *instance, irda_param_t *param, int get) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + + if (get) { + param->pv.i = self->settings.enqack[0]; + param->pv.i |= self->settings.enqack[1] << 8; + } else { + self->settings.enqack[0] = (__u16) param->pv.i & 0xff; + self->settings.enqack[1] = (__u16) param->pv.i >> 8; + } + + pr_debug("%s(), ENQ/ACK = 0x%02x,0x%02x\n", __func__ , + param->pv.i & 0xff, param->pv.i >> 8); + + return 0; +} + +/* + * Function ircomm_param_line_status (self, param) + * + * + * + */ +static int ircomm_param_line_status(void *instance, irda_param_t *param, + int get) +{ + pr_debug("%s(), not impl.\n", __func__); + + return 0; +} + +/* + * Function ircomm_param_dte (instance, param) + * + * If we get here, there must be some sort of null-modem connection, and + * we are probably working in server mode as well. + */ +static int ircomm_param_dte(void *instance, irda_param_t *param, int get) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; + __u8 dte; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + + if (get) + param->pv.i = self->settings.dte; + else { + dte = (__u8) param->pv.i; + + self->settings.dce = 0; + + if (dte & IRCOMM_DELTA_DTR) + self->settings.dce |= (IRCOMM_DELTA_DSR| + IRCOMM_DELTA_RI | + IRCOMM_DELTA_CD); + if (dte & IRCOMM_DTR) + self->settings.dce |= (IRCOMM_DSR| + IRCOMM_RI | + IRCOMM_CD); + + if (dte & IRCOMM_DELTA_RTS) + self->settings.dce |= IRCOMM_DELTA_CTS; + if (dte & IRCOMM_RTS) + self->settings.dce |= IRCOMM_CTS; + + /* Take appropriate actions */ + ircomm_tty_check_modem_status(self); + + /* Null modem cable emulator */ + self->settings.null_modem = TRUE; + } + + return 0; +} + +/* + * Function ircomm_param_dce (instance, param) + * + * + * + */ +static int ircomm_param_dce(void *instance, irda_param_t *param, int get) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; + __u8 dce; + + pr_debug("%s(), dce = 0x%02x\n", __func__ , (__u8)param->pv.i); + + dce = (__u8) param->pv.i; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + + self->settings.dce = dce; + + /* Check if any of the settings have changed */ + if (dce & 0x0f) { + if (dce & IRCOMM_DELTA_CTS) { + pr_debug("%s(), CTS\n", __func__); + } + } + + ircomm_tty_check_modem_status(self); + + return 0; +} + +/* + * Function ircomm_param_poll (instance, param) + * + * Called when the peer device is polling for the line settings + * + */ +static int ircomm_param_poll(void *instance, irda_param_t *param, int get) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + + /* Poll parameters are always of length 0 (just a signal) */ + if (!get) { + /* Respond with DTE line settings */ + ircomm_param_request(self, IRCOMM_DTE, TRUE); + } + return 0; +} + + + + + diff --git a/kernel/net/irda/ircomm/ircomm_ttp.c b/kernel/net/irda/ircomm/ircomm_ttp.c new file mode 100644 index 000000000..4b81e0934 --- /dev/null +++ b/kernel/net/irda/ircomm/ircomm_ttp.c @@ -0,0 +1,350 @@ +/********************************************************************* + * + * Filename: ircomm_ttp.c + * Version: 1.0 + * Description: Interface between IrCOMM and IrTTP + * Status: Stable + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Sun Jun 6 20:48:27 1999 + * Modified at: Mon Dec 13 11:35:13 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1999 Dag Brattli, All Rights Reserved. + * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + ********************************************************************/ + +#include <linux/init.h> + +#include <net/irda/irda.h> +#include <net/irda/irlmp.h> +#include <net/irda/iriap.h> +#include <net/irda/irttp.h> + +#include <net/irda/ircomm_event.h> +#include <net/irda/ircomm_ttp.h> + +static int ircomm_ttp_data_indication(void *instance, void *sap, + struct sk_buff *skb); +static void ircomm_ttp_connect_confirm(void *instance, void *sap, + struct qos_info *qos, + __u32 max_sdu_size, + __u8 max_header_size, + struct sk_buff *skb); +static void ircomm_ttp_connect_indication(void *instance, void *sap, + struct qos_info *qos, + __u32 max_sdu_size, + __u8 max_header_size, + struct sk_buff *skb); +static void ircomm_ttp_flow_indication(void *instance, void *sap, + LOCAL_FLOW cmd); +static void ircomm_ttp_disconnect_indication(void *instance, void *sap, + LM_REASON reason, + struct sk_buff *skb); +static int ircomm_ttp_data_request(struct ircomm_cb *self, + struct sk_buff *skb, + int clen); +static int ircomm_ttp_connect_request(struct ircomm_cb *self, + struct sk_buff *userdata, + struct ircomm_info *info); +static int ircomm_ttp_connect_response(struct ircomm_cb *self, + struct sk_buff *userdata); +static int ircomm_ttp_disconnect_request(struct ircomm_cb *self, + struct sk_buff *userdata, + struct ircomm_info *info); + +/* + * Function ircomm_open_tsap (self) + * + * + * + */ +int ircomm_open_tsap(struct ircomm_cb *self) +{ + notify_t notify; + + /* Register callbacks */ + irda_notify_init(¬ify); + notify.data_indication = ircomm_ttp_data_indication; + notify.connect_confirm = ircomm_ttp_connect_confirm; + notify.connect_indication = ircomm_ttp_connect_indication; + notify.flow_indication = ircomm_ttp_flow_indication; + notify.disconnect_indication = ircomm_ttp_disconnect_indication; + notify.instance = self; + strlcpy(notify.name, "IrCOMM", sizeof(notify.name)); + + self->tsap = irttp_open_tsap(LSAP_ANY, DEFAULT_INITIAL_CREDIT, + ¬ify); + if (!self->tsap) { + pr_debug("%sfailed to allocate tsap\n", __func__); + return -1; + } + self->slsap_sel = self->tsap->stsap_sel; + + /* + * Initialize the call-table for issuing commands + */ + self->issue.data_request = ircomm_ttp_data_request; + self->issue.connect_request = ircomm_ttp_connect_request; + self->issue.connect_response = ircomm_ttp_connect_response; + self->issue.disconnect_request = ircomm_ttp_disconnect_request; + + return 0; +} + +/* + * Function ircomm_ttp_connect_request (self, userdata) + * + * + * + */ +static int ircomm_ttp_connect_request(struct ircomm_cb *self, + struct sk_buff *userdata, + struct ircomm_info *info) +{ + int ret = 0; + + /* Don't forget to refcount it - should be NULL anyway */ + if(userdata) + skb_get(userdata); + + ret = irttp_connect_request(self->tsap, info->dlsap_sel, + info->saddr, info->daddr, NULL, + TTP_SAR_DISABLE, userdata); + + return ret; +} + +/* + * Function ircomm_ttp_connect_response (self, skb) + * + * + * + */ +static int ircomm_ttp_connect_response(struct ircomm_cb *self, + struct sk_buff *userdata) +{ + int ret; + + /* Don't forget to refcount it - should be NULL anyway */ + if(userdata) + skb_get(userdata); + + ret = irttp_connect_response(self->tsap, TTP_SAR_DISABLE, userdata); + + return ret; +} + +/* + * Function ircomm_ttp_data_request (self, userdata) + * + * Send IrCOMM data to IrTTP layer. Currently we do not try to combine + * control data with pure data, so they will be sent as separate frames. + * Should not be a big problem though, since control frames are rare. But + * some of them are sent after connection establishment, so this can + * increase the latency a bit. + */ +static int ircomm_ttp_data_request(struct ircomm_cb *self, + struct sk_buff *skb, + int clen) +{ + int ret; + + IRDA_ASSERT(skb != NULL, return -1;); + + pr_debug("%s(), clen=%d\n", __func__ , clen); + + /* + * Insert clen field, currently we either send data only, or control + * only frames, to make things easier and avoid queueing + */ + IRDA_ASSERT(skb_headroom(skb) >= IRCOMM_HEADER_SIZE, return -1;); + + /* Don't forget to refcount it - see ircomm_tty_do_softint() */ + skb_get(skb); + + skb_push(skb, IRCOMM_HEADER_SIZE); + + skb->data[0] = clen; + + ret = irttp_data_request(self->tsap, skb); + if (ret) { + net_err_ratelimited("%s(), failed\n", __func__); + /* irttp_data_request already free the packet */ + } + + return ret; +} + +/* + * Function ircomm_ttp_data_indication (instance, sap, skb) + * + * Incoming data + * + */ +static int ircomm_ttp_data_indication(void *instance, void *sap, + struct sk_buff *skb) +{ + struct ircomm_cb *self = (struct ircomm_cb *) instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return -1;); + IRDA_ASSERT(skb != NULL, return -1;); + + ircomm_do_event(self, IRCOMM_TTP_DATA_INDICATION, skb, NULL); + + /* Drop reference count - see ircomm_tty_data_indication(). */ + dev_kfree_skb(skb); + + return 0; +} + +static void ircomm_ttp_connect_confirm(void *instance, void *sap, + struct qos_info *qos, + __u32 max_sdu_size, + __u8 max_header_size, + struct sk_buff *skb) +{ + struct ircomm_cb *self = (struct ircomm_cb *) instance; + struct ircomm_info info; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;); + IRDA_ASSERT(skb != NULL, return;); + IRDA_ASSERT(qos != NULL, goto out;); + + if (max_sdu_size != TTP_SAR_DISABLE) { + net_err_ratelimited("%s(), SAR not allowed for IrCOMM!\n", + __func__); + goto out; + } + + info.max_data_size = irttp_get_max_seg_size(self->tsap) + - IRCOMM_HEADER_SIZE; + info.max_header_size = max_header_size + IRCOMM_HEADER_SIZE; + info.qos = qos; + + ircomm_do_event(self, IRCOMM_TTP_CONNECT_CONFIRM, skb, &info); + +out: + /* Drop reference count - see ircomm_tty_connect_confirm(). */ + dev_kfree_skb(skb); +} + +/* + * Function ircomm_ttp_connect_indication (instance, sap, qos, max_sdu_size, + * max_header_size, skb) + * + * + * + */ +static void ircomm_ttp_connect_indication(void *instance, void *sap, + struct qos_info *qos, + __u32 max_sdu_size, + __u8 max_header_size, + struct sk_buff *skb) +{ + struct ircomm_cb *self = (struct ircomm_cb *)instance; + struct ircomm_info info; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;); + IRDA_ASSERT(skb != NULL, return;); + IRDA_ASSERT(qos != NULL, goto out;); + + if (max_sdu_size != TTP_SAR_DISABLE) { + net_err_ratelimited("%s(), SAR not allowed for IrCOMM!\n", + __func__); + goto out; + } + + info.max_data_size = irttp_get_max_seg_size(self->tsap) + - IRCOMM_HEADER_SIZE; + info.max_header_size = max_header_size + IRCOMM_HEADER_SIZE; + info.qos = qos; + + ircomm_do_event(self, IRCOMM_TTP_CONNECT_INDICATION, skb, &info); + +out: + /* Drop reference count - see ircomm_tty_connect_indication(). */ + dev_kfree_skb(skb); +} + +/* + * Function ircomm_ttp_disconnect_request (self, userdata, info) + * + * + * + */ +static int ircomm_ttp_disconnect_request(struct ircomm_cb *self, + struct sk_buff *userdata, + struct ircomm_info *info) +{ + int ret; + + /* Don't forget to refcount it - should be NULL anyway */ + if(userdata) + skb_get(userdata); + + ret = irttp_disconnect_request(self->tsap, userdata, P_NORMAL); + + return ret; +} + +/* + * Function ircomm_ttp_disconnect_indication (instance, sap, reason, skb) + * + * + * + */ +static void ircomm_ttp_disconnect_indication(void *instance, void *sap, + LM_REASON reason, + struct sk_buff *skb) +{ + struct ircomm_cb *self = (struct ircomm_cb *) instance; + struct ircomm_info info; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;); + + info.reason = reason; + + ircomm_do_event(self, IRCOMM_TTP_DISCONNECT_INDICATION, skb, &info); + + /* Drop reference count - see ircomm_tty_disconnect_indication(). */ + if(skb) + dev_kfree_skb(skb); +} + +/* + * Function ircomm_ttp_flow_indication (instance, sap, cmd) + * + * Layer below is telling us to start or stop the flow of data + * + */ +static void ircomm_ttp_flow_indication(void *instance, void *sap, + LOCAL_FLOW cmd) +{ + struct ircomm_cb *self = (struct ircomm_cb *) instance; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_MAGIC, return;); + + if (self->notify.flow_indication) + self->notify.flow_indication(self->notify.instance, self, cmd); +} + + diff --git a/kernel/net/irda/ircomm/ircomm_tty.c b/kernel/net/irda/ircomm/ircomm_tty.c new file mode 100644 index 000000000..683346d2d --- /dev/null +++ b/kernel/net/irda/ircomm/ircomm_tty.c @@ -0,0 +1,1362 @@ +/********************************************************************* + * + * Filename: ircomm_tty.c + * Version: 1.0 + * Description: IrCOMM serial TTY driver + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Sun Jun 6 21:00:56 1999 + * Modified at: Wed Feb 23 00:09:02 2000 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * Sources: serial.c and previous IrCOMM work by Takahide Higuchi + * + * Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved. + * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + ********************************************************************/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/fs.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/seq_file.h> +#include <linux/termios.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/interrupt.h> +#include <linux/device.h> /* for MODULE_ALIAS_CHARDEV_MAJOR */ + +#include <asm/uaccess.h> + +#include <net/irda/irda.h> +#include <net/irda/irmod.h> + +#include <net/irda/ircomm_core.h> +#include <net/irda/ircomm_param.h> +#include <net/irda/ircomm_tty_attach.h> +#include <net/irda/ircomm_tty.h> + +static int ircomm_tty_install(struct tty_driver *driver, + struct tty_struct *tty); +static int ircomm_tty_open(struct tty_struct *tty, struct file *filp); +static void ircomm_tty_close(struct tty_struct * tty, struct file *filp); +static int ircomm_tty_write(struct tty_struct * tty, + const unsigned char *buf, int count); +static int ircomm_tty_write_room(struct tty_struct *tty); +static void ircomm_tty_throttle(struct tty_struct *tty); +static void ircomm_tty_unthrottle(struct tty_struct *tty); +static int ircomm_tty_chars_in_buffer(struct tty_struct *tty); +static void ircomm_tty_flush_buffer(struct tty_struct *tty); +static void ircomm_tty_send_xchar(struct tty_struct *tty, char ch); +static void ircomm_tty_wait_until_sent(struct tty_struct *tty, int timeout); +static void ircomm_tty_hangup(struct tty_struct *tty); +static void ircomm_tty_do_softint(struct work_struct *work); +static void ircomm_tty_shutdown(struct ircomm_tty_cb *self); +static void ircomm_tty_stop(struct tty_struct *tty); + +static int ircomm_tty_data_indication(void *instance, void *sap, + struct sk_buff *skb); +static int ircomm_tty_control_indication(void *instance, void *sap, + struct sk_buff *skb); +static void ircomm_tty_flow_indication(void *instance, void *sap, + LOCAL_FLOW cmd); +#ifdef CONFIG_PROC_FS +static const struct file_operations ircomm_tty_proc_fops; +#endif /* CONFIG_PROC_FS */ +static struct tty_driver *driver; + +static hashbin_t *ircomm_tty = NULL; + +static const struct tty_operations ops = { + .install = ircomm_tty_install, + .open = ircomm_tty_open, + .close = ircomm_tty_close, + .write = ircomm_tty_write, + .write_room = ircomm_tty_write_room, + .chars_in_buffer = ircomm_tty_chars_in_buffer, + .flush_buffer = ircomm_tty_flush_buffer, + .ioctl = ircomm_tty_ioctl, /* ircomm_tty_ioctl.c */ + .tiocmget = ircomm_tty_tiocmget, /* ircomm_tty_ioctl.c */ + .tiocmset = ircomm_tty_tiocmset, /* ircomm_tty_ioctl.c */ + .throttle = ircomm_tty_throttle, + .unthrottle = ircomm_tty_unthrottle, + .send_xchar = ircomm_tty_send_xchar, + .set_termios = ircomm_tty_set_termios, + .stop = ircomm_tty_stop, + .start = ircomm_tty_start, + .hangup = ircomm_tty_hangup, + .wait_until_sent = ircomm_tty_wait_until_sent, +#ifdef CONFIG_PROC_FS + .proc_fops = &ircomm_tty_proc_fops, +#endif /* CONFIG_PROC_FS */ +}; + +static void ircomm_port_raise_dtr_rts(struct tty_port *port, int raise) +{ + struct ircomm_tty_cb *self = container_of(port, struct ircomm_tty_cb, + port); + /* + * Here, we use to lock those two guys, but as ircomm_param_request() + * does it itself, I don't see the point (and I see the deadlock). + * Jean II + */ + if (raise) + self->settings.dte |= IRCOMM_RTS | IRCOMM_DTR; + else + self->settings.dte &= ~(IRCOMM_RTS | IRCOMM_DTR); + + ircomm_param_request(self, IRCOMM_DTE, TRUE); +} + +static int ircomm_port_carrier_raised(struct tty_port *port) +{ + struct ircomm_tty_cb *self = container_of(port, struct ircomm_tty_cb, + port); + return self->settings.dce & IRCOMM_CD; +} + +static const struct tty_port_operations ircomm_port_ops = { + .dtr_rts = ircomm_port_raise_dtr_rts, + .carrier_raised = ircomm_port_carrier_raised, +}; + +/* + * Function ircomm_tty_init() + * + * Init IrCOMM TTY layer/driver + * + */ +static int __init ircomm_tty_init(void) +{ + driver = alloc_tty_driver(IRCOMM_TTY_PORTS); + if (!driver) + return -ENOMEM; + ircomm_tty = hashbin_new(HB_LOCK); + if (ircomm_tty == NULL) { + net_err_ratelimited("%s(), can't allocate hashbin!\n", + __func__); + put_tty_driver(driver); + return -ENOMEM; + } + + driver->driver_name = "ircomm"; + driver->name = "ircomm"; + driver->major = IRCOMM_TTY_MAJOR; + driver->minor_start = IRCOMM_TTY_MINOR; + driver->type = TTY_DRIVER_TYPE_SERIAL; + driver->subtype = SERIAL_TYPE_NORMAL; + driver->init_termios = tty_std_termios; + driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(driver, &ops); + if (tty_register_driver(driver)) { + net_err_ratelimited("%s(): Couldn't register serial driver\n", + __func__); + put_tty_driver(driver); + return -1; + } + return 0; +} + +static void __exit __ircomm_tty_cleanup(struct ircomm_tty_cb *self) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + ircomm_tty_shutdown(self); + + self->magic = 0; + tty_port_destroy(&self->port); + kfree(self); +} + +/* + * Function ircomm_tty_cleanup () + * + * Remove IrCOMM TTY layer/driver + * + */ +static void __exit ircomm_tty_cleanup(void) +{ + int ret; + + ret = tty_unregister_driver(driver); + if (ret) { + net_err_ratelimited("%s(), failed to unregister driver\n", + __func__); + return; + } + + hashbin_delete(ircomm_tty, (FREE_FUNC) __ircomm_tty_cleanup); + put_tty_driver(driver); +} + +/* + * Function ircomm_startup (self) + * + * + * + */ +static int ircomm_tty_startup(struct ircomm_tty_cb *self) +{ + notify_t notify; + int ret = -ENODEV; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + + /* Check if already open */ + if (test_and_set_bit(ASYNCB_INITIALIZED, &self->port.flags)) { + pr_debug("%s(), already open so break out!\n", __func__); + return 0; + } + + /* Register with IrCOMM */ + irda_notify_init(¬ify); + /* These callbacks we must handle ourselves */ + notify.data_indication = ircomm_tty_data_indication; + notify.udata_indication = ircomm_tty_control_indication; + notify.flow_indication = ircomm_tty_flow_indication; + + /* Use the ircomm_tty interface for these ones */ + notify.disconnect_indication = ircomm_tty_disconnect_indication; + notify.connect_confirm = ircomm_tty_connect_confirm; + notify.connect_indication = ircomm_tty_connect_indication; + strlcpy(notify.name, "ircomm_tty", sizeof(notify.name)); + notify.instance = self; + + if (!self->ircomm) { + self->ircomm = ircomm_open(¬ify, self->service_type, + self->line); + } + if (!self->ircomm) + goto err; + + self->slsap_sel = self->ircomm->slsap_sel; + + /* Connect IrCOMM link with remote device */ + ret = ircomm_tty_attach_cable(self); + if (ret < 0) { + net_err_ratelimited("%s(), error attaching cable!\n", __func__); + goto err; + } + + return 0; +err: + clear_bit(ASYNCB_INITIALIZED, &self->port.flags); + return ret; +} + +/* + * Function ircomm_block_til_ready (self, filp) + * + * + * + */ +static int ircomm_tty_block_til_ready(struct ircomm_tty_cb *self, + struct tty_struct *tty, struct file *filp) +{ + struct tty_port *port = &self->port; + DECLARE_WAITQUEUE(wait, current); + int retval; + int do_clocal = 0; + unsigned long flags; + + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + */ + if (test_bit(TTY_IO_ERROR, &tty->flags)) { + port->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (filp->f_flags & O_NONBLOCK) { + /* nonblock mode is set */ + if (tty->termios.c_cflag & CBAUD) + tty_port_raise_dtr_rts(port); + port->flags |= ASYNC_NORMAL_ACTIVE; + pr_debug("%s(), O_NONBLOCK requested!\n", __func__); + return 0; + } + + if (tty->termios.c_cflag & CLOCAL) { + pr_debug("%s(), doing CLOCAL!\n", __func__); + do_clocal = 1; + } + + /* Wait for carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, port->count is dropped by one, so that + * mgsl_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + + retval = 0; + add_wait_queue(&port->open_wait, &wait); + + pr_debug("%s(%d):block_til_ready before block on %s open_count=%d\n", + __FILE__, __LINE__, tty->driver->name, port->count); + + spin_lock_irqsave(&port->lock, flags); + port->count--; + port->blocked_open++; + spin_unlock_irqrestore(&port->lock, flags); + + while (1) { + if (C_BAUD(tty) && test_bit(ASYNCB_INITIALIZED, &port->flags)) + tty_port_raise_dtr_rts(port); + + set_current_state(TASK_INTERRUPTIBLE); + + if (tty_hung_up_p(filp) || + !test_bit(ASYNCB_INITIALIZED, &port->flags)) { + retval = (port->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS; + break; + } + + /* + * Check if link is ready now. Even if CLOCAL is + * specified, we cannot return before the IrCOMM link is + * ready + */ + if (!test_bit(ASYNCB_CLOSING, &port->flags) && + (do_clocal || tty_port_carrier_raised(port)) && + self->state == IRCOMM_TTY_READY) + { + break; + } + + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + + pr_debug("%s(%d):block_til_ready blocking on %s open_count=%d\n", + __FILE__, __LINE__, tty->driver->name, port->count); + + schedule(); + } + + __set_current_state(TASK_RUNNING); + remove_wait_queue(&port->open_wait, &wait); + + spin_lock_irqsave(&port->lock, flags); + if (!tty_hung_up_p(filp)) + port->count++; + port->blocked_open--; + spin_unlock_irqrestore(&port->lock, flags); + + pr_debug("%s(%d):block_til_ready after blocking on %s open_count=%d\n", + __FILE__, __LINE__, tty->driver->name, port->count); + + if (!retval) + port->flags |= ASYNC_NORMAL_ACTIVE; + + return retval; +} + + +static int ircomm_tty_install(struct tty_driver *driver, struct tty_struct *tty) +{ + struct ircomm_tty_cb *self; + unsigned int line = tty->index; + + /* Check if instance already exists */ + self = hashbin_lock_find(ircomm_tty, line, NULL); + if (!self) { + /* No, so make new instance */ + self = kzalloc(sizeof(struct ircomm_tty_cb), GFP_KERNEL); + if (self == NULL) + return -ENOMEM; + + tty_port_init(&self->port); + self->port.ops = &ircomm_port_ops; + self->magic = IRCOMM_TTY_MAGIC; + self->flow = FLOW_STOP; + + self->line = line; + INIT_WORK(&self->tqueue, ircomm_tty_do_softint); + self->max_header_size = IRCOMM_TTY_HDR_UNINITIALISED; + self->max_data_size = IRCOMM_TTY_DATA_UNINITIALISED; + + /* Init some important stuff */ + init_timer(&self->watchdog_timer); + spin_lock_init(&self->spinlock); + + /* + * Force TTY into raw mode by default which is usually what + * we want for IrCOMM and IrLPT. This way applications will + * not have to twiddle with printcap etc. + * + * Note this is completely usafe and doesn't work properly + */ + tty->termios.c_iflag = 0; + tty->termios.c_oflag = 0; + + /* Insert into hash */ + hashbin_insert(ircomm_tty, (irda_queue_t *) self, line, NULL); + } + + tty->driver_data = self; + + return tty_port_install(&self->port, driver, tty); +} + +/* + * Function ircomm_tty_open (tty, filp) + * + * This routine is called when a particular tty device is opened. This + * routine is mandatory; if this routine is not filled in, the attempted + * open will fail with ENODEV. + */ +static int ircomm_tty_open(struct tty_struct *tty, struct file *filp) +{ + struct ircomm_tty_cb *self = tty->driver_data; + unsigned long flags; + int ret; + + /* ++ is not atomic, so this should be protected - Jean II */ + spin_lock_irqsave(&self->port.lock, flags); + self->port.count++; + spin_unlock_irqrestore(&self->port.lock, flags); + tty_port_tty_set(&self->port, tty); + + pr_debug("%s(), %s%d, count = %d\n", __func__ , tty->driver->name, + self->line, self->port.count); + + /* Not really used by us, but lets do it anyway */ + self->port.low_latency = (self->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + /* + * If the port is the middle of closing, bail out now + */ + if (test_bit(ASYNCB_CLOSING, &self->port.flags)) { + + /* Hm, why are we blocking on ASYNC_CLOSING if we + * do return -EAGAIN/-ERESTARTSYS below anyway? + * IMHO it's either not needed in the first place + * or for some reason we need to make sure the async + * closing has been finished - if so, wouldn't we + * probably better sleep uninterruptible? + */ + + if (wait_event_interruptible(self->port.close_wait, + !test_bit(ASYNCB_CLOSING, &self->port.flags))) { + net_warn_ratelimited("%s - got signal while blocking on ASYNC_CLOSING!\n", + __func__); + return -ERESTARTSYS; + } + +#ifdef SERIAL_DO_RESTART + return (self->port.flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS; +#else + return -EAGAIN; +#endif + } + + /* Check if this is a "normal" ircomm device, or an irlpt device */ + if (self->line < 0x10) { + self->service_type = IRCOMM_3_WIRE | IRCOMM_9_WIRE; + self->settings.service_type = IRCOMM_9_WIRE; /* 9 wire as default */ + /* Jan Kiszka -> add DSR/RI -> Conform to IrCOMM spec */ + self->settings.dce = IRCOMM_CTS | IRCOMM_CD | IRCOMM_DSR | IRCOMM_RI; /* Default line settings */ + pr_debug("%s(), IrCOMM device\n", __func__); + } else { + pr_debug("%s(), IrLPT device\n", __func__); + self->service_type = IRCOMM_3_WIRE_RAW; + self->settings.service_type = IRCOMM_3_WIRE_RAW; /* Default */ + } + + ret = ircomm_tty_startup(self); + if (ret) + return ret; + + ret = ircomm_tty_block_til_ready(self, tty, filp); + if (ret) { + pr_debug("%s(), returning after block_til_ready with %d\n", + __func__, ret); + + return ret; + } + return 0; +} + +/* + * Function ircomm_tty_close (tty, filp) + * + * This routine is called when a particular tty device is closed. + * + */ +static void ircomm_tty_close(struct tty_struct *tty, struct file *filp) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; + struct tty_port *port = &self->port; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + if (tty_port_close_start(port, tty, filp) == 0) + return; + + ircomm_tty_shutdown(self); + + tty_driver_flush_buffer(tty); + + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); +} + +/* + * Function ircomm_tty_flush_buffer (tty) + * + * + * + */ +static void ircomm_tty_flush_buffer(struct tty_struct *tty) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + /* + * Let do_softint() do this to avoid race condition with + * do_softint() ;-) + */ + schedule_work(&self->tqueue); +} + +/* + * Function ircomm_tty_do_softint (work) + * + * We use this routine to give the write wakeup to the user at at a + * safe time (as fast as possible after write have completed). This + * can be compared to the Tx interrupt. + */ +static void ircomm_tty_do_softint(struct work_struct *work) +{ + struct ircomm_tty_cb *self = + container_of(work, struct ircomm_tty_cb, tqueue); + struct tty_struct *tty; + unsigned long flags; + struct sk_buff *skb, *ctrl_skb; + + if (!self || self->magic != IRCOMM_TTY_MAGIC) + return; + + tty = tty_port_tty_get(&self->port); + if (!tty) + return; + + /* Unlink control buffer */ + spin_lock_irqsave(&self->spinlock, flags); + + ctrl_skb = self->ctrl_skb; + self->ctrl_skb = NULL; + + spin_unlock_irqrestore(&self->spinlock, flags); + + /* Flush control buffer if any */ + if(ctrl_skb) { + if(self->flow == FLOW_START) + ircomm_control_request(self->ircomm, ctrl_skb); + /* Drop reference count - see ircomm_ttp_data_request(). */ + dev_kfree_skb(ctrl_skb); + } + + if (tty->hw_stopped) + goto put; + + /* Unlink transmit buffer */ + spin_lock_irqsave(&self->spinlock, flags); + + skb = self->tx_skb; + self->tx_skb = NULL; + + spin_unlock_irqrestore(&self->spinlock, flags); + + /* Flush transmit buffer if any */ + if (skb) { + ircomm_tty_do_event(self, IRCOMM_TTY_DATA_REQUEST, skb, NULL); + /* Drop reference count - see ircomm_ttp_data_request(). */ + dev_kfree_skb(skb); + } + + /* Check if user (still) wants to be waken up */ + tty_wakeup(tty); +put: + tty_kref_put(tty); +} + +/* + * Function ircomm_tty_write (tty, buf, count) + * + * This routine is called by the kernel to write a series of characters + * to the tty device. The characters may come from user space or kernel + * space. This routine will return the number of characters actually + * accepted for writing. This routine is mandatory. + */ +static int ircomm_tty_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; + unsigned long flags; + struct sk_buff *skb; + int tailroom = 0; + int len = 0; + int size; + + pr_debug("%s(), count=%d, hw_stopped=%d\n", __func__ , count, + tty->hw_stopped); + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + + /* We may receive packets from the TTY even before we have finished + * our setup. Not cool. + * The problem is that we don't know the final header and data size + * to create the proper skb, so any skb we would create would have + * bogus header and data size, so need care. + * We use a bogus header size to safely detect this condition. + * Another problem is that hw_stopped was set to 0 way before it + * should be, so we would drop this skb. It should now be fixed. + * One option is to not accept data until we are properly setup. + * But, I suspect that when it happens, the ppp line discipline + * just "drops" the data, which might screw up connect scripts. + * The second option is to create a "safe skb", with large header + * and small size (see ircomm_tty_open() for values). + * We just need to make sure that when the real values get filled, + * we don't mess up the original "safe skb" (see tx_data_size). + * Jean II */ + if (self->max_header_size == IRCOMM_TTY_HDR_UNINITIALISED) { + pr_debug("%s() : not initialised\n", __func__); +#ifdef IRCOMM_NO_TX_BEFORE_INIT + /* We didn't consume anything, TTY will retry */ + return 0; +#endif + } + + if (count < 1) + return 0; + + /* Protect our manipulation of self->tx_skb and related */ + spin_lock_irqsave(&self->spinlock, flags); + + /* Fetch current transmit buffer */ + skb = self->tx_skb; + + /* + * Send out all the data we get, possibly as multiple fragmented + * frames, but this will only happen if the data is larger than the + * max data size. The normal case however is just the opposite, and + * this function may be called multiple times, and will then actually + * defragment the data and send it out as one packet as soon as + * possible, but at a safer point in time + */ + while (count) { + size = count; + + /* Adjust data size to the max data size */ + if (size > self->max_data_size) + size = self->max_data_size; + + /* + * Do we already have a buffer ready for transmit, or do + * we need to allocate a new frame + */ + if (skb) { + /* + * Any room for more data at the end of the current + * transmit buffer? Cannot use skb_tailroom, since + * dev_alloc_skb gives us a larger skb than we + * requested + * Note : use tx_data_size, because max_data_size + * may have changed and we don't want to overwrite + * the skb. - Jean II + */ + if ((tailroom = (self->tx_data_size - skb->len)) > 0) { + /* Adjust data to tailroom */ + if (size > tailroom) + size = tailroom; + } else { + /* + * Current transmit frame is full, so break + * out, so we can send it as soon as possible + */ + break; + } + } else { + /* Prepare a full sized frame */ + skb = alloc_skb(self->max_data_size+ + self->max_header_size, + GFP_ATOMIC); + if (!skb) { + spin_unlock_irqrestore(&self->spinlock, flags); + return -ENOBUFS; + } + skb_reserve(skb, self->max_header_size); + self->tx_skb = skb; + /* Remember skb size because max_data_size may + * change later on - Jean II */ + self->tx_data_size = self->max_data_size; + } + + /* Copy data */ + memcpy(skb_put(skb,size), buf + len, size); + + count -= size; + len += size; + } + + spin_unlock_irqrestore(&self->spinlock, flags); + + /* + * Schedule a new thread which will transmit the frame as soon + * as possible, but at a safe point in time. We do this so the + * "user" can give us data multiple times, as PPP does (because of + * its 256 byte tx buffer). We will then defragment and send out + * all this data as one single packet. + */ + schedule_work(&self->tqueue); + + return len; +} + +/* + * Function ircomm_tty_write_room (tty) + * + * This routine returns the numbers of characters the tty driver will + * accept for queuing to be written. This number is subject to change as + * output buffers get emptied, or if the output flow control is acted. + */ +static int ircomm_tty_write_room(struct tty_struct *tty) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; + unsigned long flags; + int ret; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + +#ifdef IRCOMM_NO_TX_BEFORE_INIT + /* max_header_size tells us if the channel is initialised or not. */ + if (self->max_header_size == IRCOMM_TTY_HDR_UNINITIALISED) + /* Don't bother us yet */ + return 0; +#endif + + /* Check if we are allowed to transmit any data. + * hw_stopped is the regular flow control. + * Jean II */ + if (tty->hw_stopped) + ret = 0; + else { + spin_lock_irqsave(&self->spinlock, flags); + if (self->tx_skb) + ret = self->tx_data_size - self->tx_skb->len; + else + ret = self->max_data_size; + spin_unlock_irqrestore(&self->spinlock, flags); + } + pr_debug("%s(), ret=%d\n", __func__ , ret); + + return ret; +} + +/* + * Function ircomm_tty_wait_until_sent (tty, timeout) + * + * This routine waits until the device has written out all of the + * characters in its transmitter FIFO. + */ +static void ircomm_tty_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; + unsigned long orig_jiffies, poll_time; + unsigned long flags; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + orig_jiffies = jiffies; + + /* Set poll time to 200 ms */ + poll_time = msecs_to_jiffies(200); + if (timeout) + poll_time = min_t(unsigned long, timeout, poll_time); + + spin_lock_irqsave(&self->spinlock, flags); + while (self->tx_skb && self->tx_skb->len) { + spin_unlock_irqrestore(&self->spinlock, flags); + schedule_timeout_interruptible(poll_time); + spin_lock_irqsave(&self->spinlock, flags); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } + spin_unlock_irqrestore(&self->spinlock, flags); + __set_current_state(TASK_RUNNING); +} + +/* + * Function ircomm_tty_throttle (tty) + * + * This routine notifies the tty driver that input buffers for the line + * discipline are close to full, and it should somehow signal that no + * more characters should be sent to the tty. + */ +static void ircomm_tty_throttle(struct tty_struct *tty) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + /* Software flow control? */ + if (I_IXOFF(tty)) + ircomm_tty_send_xchar(tty, STOP_CHAR(tty)); + + /* Hardware flow control? */ + if (tty->termios.c_cflag & CRTSCTS) { + self->settings.dte &= ~IRCOMM_RTS; + self->settings.dte |= IRCOMM_DELTA_RTS; + + ircomm_param_request(self, IRCOMM_DTE, TRUE); + } + + ircomm_flow_request(self->ircomm, FLOW_STOP); +} + +/* + * Function ircomm_tty_unthrottle (tty) + * + * This routine notifies the tty drivers that it should signals that + * characters can now be sent to the tty without fear of overrunning the + * input buffers of the line disciplines. + */ +static void ircomm_tty_unthrottle(struct tty_struct *tty) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + /* Using software flow control? */ + if (I_IXOFF(tty)) { + ircomm_tty_send_xchar(tty, START_CHAR(tty)); + } + + /* Using hardware flow control? */ + if (tty->termios.c_cflag & CRTSCTS) { + self->settings.dte |= (IRCOMM_RTS|IRCOMM_DELTA_RTS); + + ircomm_param_request(self, IRCOMM_DTE, TRUE); + pr_debug("%s(), FLOW_START\n", __func__); + } + ircomm_flow_request(self->ircomm, FLOW_START); +} + +/* + * Function ircomm_tty_chars_in_buffer (tty) + * + * Indicates if there are any data in the buffer + * + */ +static int ircomm_tty_chars_in_buffer(struct tty_struct *tty) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; + unsigned long flags; + int len = 0; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + + spin_lock_irqsave(&self->spinlock, flags); + + if (self->tx_skb) + len = self->tx_skb->len; + + spin_unlock_irqrestore(&self->spinlock, flags); + + return len; +} + +static void ircomm_tty_shutdown(struct ircomm_tty_cb *self) +{ + unsigned long flags; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + if (!test_and_clear_bit(ASYNCB_INITIALIZED, &self->port.flags)) + return; + + ircomm_tty_detach_cable(self); + + spin_lock_irqsave(&self->spinlock, flags); + + del_timer(&self->watchdog_timer); + + /* Free parameter buffer */ + if (self->ctrl_skb) { + dev_kfree_skb(self->ctrl_skb); + self->ctrl_skb = NULL; + } + + /* Free transmit buffer */ + if (self->tx_skb) { + dev_kfree_skb(self->tx_skb); + self->tx_skb = NULL; + } + + if (self->ircomm) { + ircomm_close(self->ircomm); + self->ircomm = NULL; + } + + spin_unlock_irqrestore(&self->spinlock, flags); +} + +/* + * Function ircomm_tty_hangup (tty) + * + * This routine notifies the tty driver that it should hangup the tty + * device. + * + */ +static void ircomm_tty_hangup(struct tty_struct *tty) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; + struct tty_port *port = &self->port; + unsigned long flags; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + /* ircomm_tty_flush_buffer(tty); */ + ircomm_tty_shutdown(self); + + spin_lock_irqsave(&port->lock, flags); + port->flags &= ~ASYNC_NORMAL_ACTIVE; + if (port->tty) { + set_bit(TTY_IO_ERROR, &port->tty->flags); + tty_kref_put(port->tty); + } + port->tty = NULL; + port->count = 0; + spin_unlock_irqrestore(&port->lock, flags); + + wake_up_interruptible(&port->open_wait); +} + +/* + * Function ircomm_tty_send_xchar (tty, ch) + * + * This routine is used to send a high-priority XON/XOFF character to + * the device. + */ +static void ircomm_tty_send_xchar(struct tty_struct *tty, char ch) +{ + pr_debug("%s(), not impl\n", __func__); +} + +/* + * Function ircomm_tty_start (tty) + * + * This routine notifies the tty driver that it resume sending + * characters to the tty device. + */ +void ircomm_tty_start(struct tty_struct *tty) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; + + ircomm_flow_request(self->ircomm, FLOW_START); +} + +/* + * Function ircomm_tty_stop (tty) + * + * This routine notifies the tty driver that it should stop outputting + * characters to the tty device. + */ +static void ircomm_tty_stop(struct tty_struct *tty) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + ircomm_flow_request(self->ircomm, FLOW_STOP); +} + +/* + * Function ircomm_check_modem_status (self) + * + * Check for any changes in the DCE's line settings. This function should + * be called whenever the dce parameter settings changes, to update the + * flow control settings and other things + */ +void ircomm_tty_check_modem_status(struct ircomm_tty_cb *self) +{ + struct tty_struct *tty; + int status; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + tty = tty_port_tty_get(&self->port); + + status = self->settings.dce; + + if (status & IRCOMM_DCE_DELTA_ANY) { + /*wake_up_interruptible(&self->delta_msr_wait);*/ + } + if ((self->port.flags & ASYNC_CHECK_CD) && (status & IRCOMM_DELTA_CD)) { + pr_debug("%s(), ircomm%d CD now %s...\n", __func__ , self->line, + (status & IRCOMM_CD) ? "on" : "off"); + + if (status & IRCOMM_CD) { + wake_up_interruptible(&self->port.open_wait); + } else { + pr_debug("%s(), Doing serial hangup..\n", __func__); + if (tty) + tty_hangup(tty); + + /* Hangup will remote the tty, so better break out */ + goto put; + } + } + if (tty && tty_port_cts_enabled(&self->port)) { + if (tty->hw_stopped) { + if (status & IRCOMM_CTS) { + pr_debug("%s(), CTS tx start...\n", __func__); + tty->hw_stopped = 0; + + /* Wake up processes blocked on open */ + wake_up_interruptible(&self->port.open_wait); + + schedule_work(&self->tqueue); + goto put; + } + } else { + if (!(status & IRCOMM_CTS)) { + pr_debug("%s(), CTS tx stop...\n", __func__); + tty->hw_stopped = 1; + } + } + } +put: + tty_kref_put(tty); +} + +/* + * Function ircomm_tty_data_indication (instance, sap, skb) + * + * Handle incoming data, and deliver it to the line discipline + * + */ +static int ircomm_tty_data_indication(void *instance, void *sap, + struct sk_buff *skb) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; + struct tty_struct *tty; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + IRDA_ASSERT(skb != NULL, return -1;); + + tty = tty_port_tty_get(&self->port); + if (!tty) { + pr_debug("%s(), no tty!\n", __func__); + return 0; + } + + /* + * If we receive data when hardware is stopped then something is wrong. + * We try to poll the peers line settings to check if we are up todate. + * Devices like WinCE can do this, and since they don't send any + * params, we can just as well declare the hardware for running. + */ + if (tty->hw_stopped && (self->flow == FLOW_START)) { + pr_debug("%s(), polling for line settings!\n", __func__); + ircomm_param_request(self, IRCOMM_POLL, TRUE); + + /* We can just as well declare the hardware for running */ + ircomm_tty_send_initial_parameters(self); + ircomm_tty_link_established(self); + } + tty_kref_put(tty); + + /* + * Use flip buffer functions since the code may be called from interrupt + * context + */ + tty_insert_flip_string(&self->port, skb->data, skb->len); + tty_flip_buffer_push(&self->port); + + /* No need to kfree_skb - see ircomm_ttp_data_indication() */ + + return 0; +} + +/* + * Function ircomm_tty_control_indication (instance, sap, skb) + * + * Parse all incoming parameters (easy!) + * + */ +static int ircomm_tty_control_indication(void *instance, void *sap, + struct sk_buff *skb) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; + int clen; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + IRDA_ASSERT(skb != NULL, return -1;); + + clen = skb->data[0]; + + irda_param_extract_all(self, skb->data+1, IRDA_MIN(skb->len-1, clen), + &ircomm_param_info); + + /* No need to kfree_skb - see ircomm_control_indication() */ + + return 0; +} + +/* + * Function ircomm_tty_flow_indication (instance, sap, cmd) + * + * This function is called by IrTTP when it wants us to slow down the + * transmission of data. We just mark the hardware as stopped, and wait + * for IrTTP to notify us that things are OK again. + */ +static void ircomm_tty_flow_indication(void *instance, void *sap, + LOCAL_FLOW cmd) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; + struct tty_struct *tty; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + tty = tty_port_tty_get(&self->port); + + switch (cmd) { + case FLOW_START: + pr_debug("%s(), hw start!\n", __func__); + if (tty) + tty->hw_stopped = 0; + + /* ircomm_tty_do_softint will take care of the rest */ + schedule_work(&self->tqueue); + break; + default: /* If we get here, something is very wrong, better stop */ + case FLOW_STOP: + pr_debug("%s(), hw stopped!\n", __func__); + if (tty) + tty->hw_stopped = 1; + break; + } + + tty_kref_put(tty); + self->flow = cmd; +} + +#ifdef CONFIG_PROC_FS +static void ircomm_tty_line_info(struct ircomm_tty_cb *self, struct seq_file *m) +{ + struct tty_struct *tty; + char sep; + + seq_printf(m, "State: %s\n", ircomm_tty_state[self->state]); + + seq_puts(m, "Service type: "); + if (self->service_type & IRCOMM_9_WIRE) + seq_puts(m, "9_WIRE"); + else if (self->service_type & IRCOMM_3_WIRE) + seq_puts(m, "3_WIRE"); + else if (self->service_type & IRCOMM_3_WIRE_RAW) + seq_puts(m, "3_WIRE_RAW"); + else + seq_puts(m, "No common service type!\n"); + seq_putc(m, '\n'); + + seq_printf(m, "Port name: %s\n", self->settings.port_name); + + seq_printf(m, "DTE status:"); + sep = ' '; + if (self->settings.dte & IRCOMM_RTS) { + seq_printf(m, "%cRTS", sep); + sep = '|'; + } + if (self->settings.dte & IRCOMM_DTR) { + seq_printf(m, "%cDTR", sep); + sep = '|'; + } + seq_putc(m, '\n'); + + seq_puts(m, "DCE status:"); + sep = ' '; + if (self->settings.dce & IRCOMM_CTS) { + seq_printf(m, "%cCTS", sep); + sep = '|'; + } + if (self->settings.dce & IRCOMM_DSR) { + seq_printf(m, "%cDSR", sep); + sep = '|'; + } + if (self->settings.dce & IRCOMM_CD) { + seq_printf(m, "%cCD", sep); + sep = '|'; + } + if (self->settings.dce & IRCOMM_RI) { + seq_printf(m, "%cRI", sep); + sep = '|'; + } + seq_putc(m, '\n'); + + seq_puts(m, "Configuration: "); + if (!self->settings.null_modem) + seq_puts(m, "DTE <-> DCE\n"); + else + seq_puts(m, "DTE <-> DTE (null modem emulation)\n"); + + seq_printf(m, "Data rate: %d\n", self->settings.data_rate); + + seq_puts(m, "Flow control:"); + sep = ' '; + if (self->settings.flow_control & IRCOMM_XON_XOFF_IN) { + seq_printf(m, "%cXON_XOFF_IN", sep); + sep = '|'; + } + if (self->settings.flow_control & IRCOMM_XON_XOFF_OUT) { + seq_printf(m, "%cXON_XOFF_OUT", sep); + sep = '|'; + } + if (self->settings.flow_control & IRCOMM_RTS_CTS_IN) { + seq_printf(m, "%cRTS_CTS_IN", sep); + sep = '|'; + } + if (self->settings.flow_control & IRCOMM_RTS_CTS_OUT) { + seq_printf(m, "%cRTS_CTS_OUT", sep); + sep = '|'; + } + if (self->settings.flow_control & IRCOMM_DSR_DTR_IN) { + seq_printf(m, "%cDSR_DTR_IN", sep); + sep = '|'; + } + if (self->settings.flow_control & IRCOMM_DSR_DTR_OUT) { + seq_printf(m, "%cDSR_DTR_OUT", sep); + sep = '|'; + } + if (self->settings.flow_control & IRCOMM_ENQ_ACK_IN) { + seq_printf(m, "%cENQ_ACK_IN", sep); + sep = '|'; + } + if (self->settings.flow_control & IRCOMM_ENQ_ACK_OUT) { + seq_printf(m, "%cENQ_ACK_OUT", sep); + sep = '|'; + } + seq_putc(m, '\n'); + + seq_puts(m, "Flags:"); + sep = ' '; + if (tty_port_cts_enabled(&self->port)) { + seq_printf(m, "%cASYNC_CTS_FLOW", sep); + sep = '|'; + } + if (self->port.flags & ASYNC_CHECK_CD) { + seq_printf(m, "%cASYNC_CHECK_CD", sep); + sep = '|'; + } + if (self->port.flags & ASYNC_INITIALIZED) { + seq_printf(m, "%cASYNC_INITIALIZED", sep); + sep = '|'; + } + if (self->port.flags & ASYNC_LOW_LATENCY) { + seq_printf(m, "%cASYNC_LOW_LATENCY", sep); + sep = '|'; + } + if (self->port.flags & ASYNC_CLOSING) { + seq_printf(m, "%cASYNC_CLOSING", sep); + sep = '|'; + } + if (self->port.flags & ASYNC_NORMAL_ACTIVE) { + seq_printf(m, "%cASYNC_NORMAL_ACTIVE", sep); + sep = '|'; + } + seq_putc(m, '\n'); + + seq_printf(m, "Role: %s\n", self->client ? "client" : "server"); + seq_printf(m, "Open count: %d\n", self->port.count); + seq_printf(m, "Max data size: %d\n", self->max_data_size); + seq_printf(m, "Max header size: %d\n", self->max_header_size); + + tty = tty_port_tty_get(&self->port); + if (tty) { + seq_printf(m, "Hardware: %s\n", + tty->hw_stopped ? "Stopped" : "Running"); + tty_kref_put(tty); + } +} + +static int ircomm_tty_proc_show(struct seq_file *m, void *v) +{ + struct ircomm_tty_cb *self; + unsigned long flags; + + spin_lock_irqsave(&ircomm_tty->hb_spinlock, flags); + + self = (struct ircomm_tty_cb *) hashbin_get_first(ircomm_tty); + while (self != NULL) { + if (self->magic != IRCOMM_TTY_MAGIC) + break; + + ircomm_tty_line_info(self, m); + self = (struct ircomm_tty_cb *) hashbin_get_next(ircomm_tty); + } + spin_unlock_irqrestore(&ircomm_tty->hb_spinlock, flags); + return 0; +} + +static int ircomm_tty_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ircomm_tty_proc_show, NULL); +} + +static const struct file_operations ircomm_tty_proc_fops = { + .owner = THIS_MODULE, + .open = ircomm_tty_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif /* CONFIG_PROC_FS */ + +MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>"); +MODULE_DESCRIPTION("IrCOMM serial TTY driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(IRCOMM_TTY_MAJOR); + +module_init(ircomm_tty_init); +module_exit(ircomm_tty_cleanup); diff --git a/kernel/net/irda/ircomm/ircomm_tty_attach.c b/kernel/net/irda/ircomm/ircomm_tty_attach.c new file mode 100644 index 000000000..61137f8b5 --- /dev/null +++ b/kernel/net/irda/ircomm/ircomm_tty_attach.c @@ -0,0 +1,987 @@ +/********************************************************************* + * + * Filename: ircomm_tty_attach.c + * Version: + * Description: Code for attaching the serial driver to IrCOMM + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Sat Jun 5 17:42:00 1999 + * Modified at: Tue Jan 4 14:20:49 2000 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved. + * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + ********************************************************************/ + +#include <linux/init.h> +#include <linux/sched.h> + +#include <net/irda/irda.h> +#include <net/irda/irlmp.h> +#include <net/irda/iriap.h> +#include <net/irda/irttp.h> +#include <net/irda/irias_object.h> +#include <net/irda/parameters.h> + +#include <net/irda/ircomm_core.h> +#include <net/irda/ircomm_param.h> +#include <net/irda/ircomm_event.h> + +#include <net/irda/ircomm_tty.h> +#include <net/irda/ircomm_tty_attach.h> + +static void ircomm_tty_ias_register(struct ircomm_tty_cb *self); +static void ircomm_tty_discovery_indication(discinfo_t *discovery, + DISCOVERY_MODE mode, + void *priv); +static void ircomm_tty_getvalue_confirm(int result, __u16 obj_id, + struct ias_value *value, void *priv); +static void ircomm_tty_start_watchdog_timer(struct ircomm_tty_cb *self, + int timeout); +static void ircomm_tty_watchdog_timer_expired(void *data); + +static int ircomm_tty_state_idle(struct ircomm_tty_cb *self, + IRCOMM_TTY_EVENT event, + struct sk_buff *skb, + struct ircomm_tty_info *info); +static int ircomm_tty_state_search(struct ircomm_tty_cb *self, + IRCOMM_TTY_EVENT event, + struct sk_buff *skb, + struct ircomm_tty_info *info); +static int ircomm_tty_state_query_parameters(struct ircomm_tty_cb *self, + IRCOMM_TTY_EVENT event, + struct sk_buff *skb, + struct ircomm_tty_info *info); +static int ircomm_tty_state_query_lsap_sel(struct ircomm_tty_cb *self, + IRCOMM_TTY_EVENT event, + struct sk_buff *skb, + struct ircomm_tty_info *info); +static int ircomm_tty_state_setup(struct ircomm_tty_cb *self, + IRCOMM_TTY_EVENT event, + struct sk_buff *skb, + struct ircomm_tty_info *info); +static int ircomm_tty_state_ready(struct ircomm_tty_cb *self, + IRCOMM_TTY_EVENT event, + struct sk_buff *skb, + struct ircomm_tty_info *info); + +const char *const ircomm_tty_state[] = { + "IRCOMM_TTY_IDLE", + "IRCOMM_TTY_SEARCH", + "IRCOMM_TTY_QUERY_PARAMETERS", + "IRCOMM_TTY_QUERY_LSAP_SEL", + "IRCOMM_TTY_SETUP", + "IRCOMM_TTY_READY", + "*** ERROR *** ", +}; + +static const char *const ircomm_tty_event[] __maybe_unused = { + "IRCOMM_TTY_ATTACH_CABLE", + "IRCOMM_TTY_DETACH_CABLE", + "IRCOMM_TTY_DATA_REQUEST", + "IRCOMM_TTY_DATA_INDICATION", + "IRCOMM_TTY_DISCOVERY_REQUEST", + "IRCOMM_TTY_DISCOVERY_INDICATION", + "IRCOMM_TTY_CONNECT_CONFIRM", + "IRCOMM_TTY_CONNECT_INDICATION", + "IRCOMM_TTY_DISCONNECT_REQUEST", + "IRCOMM_TTY_DISCONNECT_INDICATION", + "IRCOMM_TTY_WD_TIMER_EXPIRED", + "IRCOMM_TTY_GOT_PARAMETERS", + "IRCOMM_TTY_GOT_LSAPSEL", + "*** ERROR ****", +}; + +static int (*state[])(struct ircomm_tty_cb *self, IRCOMM_TTY_EVENT event, + struct sk_buff *skb, struct ircomm_tty_info *info) = +{ + ircomm_tty_state_idle, + ircomm_tty_state_search, + ircomm_tty_state_query_parameters, + ircomm_tty_state_query_lsap_sel, + ircomm_tty_state_setup, + ircomm_tty_state_ready, +}; + +/* + * Function ircomm_tty_attach_cable (driver) + * + * Try to attach cable (IrCOMM link). This function will only return + * when the link has been connected, or if an error condition occurs. + * If success, the return value is the resulting service type. + */ +int ircomm_tty_attach_cable(struct ircomm_tty_cb *self) +{ + struct tty_struct *tty; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + + /* Check if somebody has already connected to us */ + if (ircomm_is_connected(self->ircomm)) { + pr_debug("%s(), already connected!\n", __func__); + return 0; + } + + /* Make sure nobody tries to write before the link is up */ + tty = tty_port_tty_get(&self->port); + if (tty) { + tty->hw_stopped = 1; + tty_kref_put(tty); + } + + ircomm_tty_ias_register(self); + + ircomm_tty_do_event(self, IRCOMM_TTY_ATTACH_CABLE, NULL, NULL); + + return 0; +} + +/* + * Function ircomm_detach_cable (driver) + * + * Detach cable, or cable has been detached by peer + * + */ +void ircomm_tty_detach_cable(struct ircomm_tty_cb *self) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + del_timer(&self->watchdog_timer); + + /* Remove discovery handler */ + if (self->ckey) { + irlmp_unregister_client(self->ckey); + self->ckey = NULL; + } + /* Remove IrCOMM hint bits */ + if (self->skey) { + irlmp_unregister_service(self->skey); + self->skey = NULL; + } + + if (self->iriap) { + iriap_close(self->iriap); + self->iriap = NULL; + } + + /* Remove LM-IAS object */ + if (self->obj) { + irias_delete_object(self->obj); + self->obj = NULL; + } + + ircomm_tty_do_event(self, IRCOMM_TTY_DETACH_CABLE, NULL, NULL); + + /* Reset some values */ + self->daddr = self->saddr = 0; + self->dlsap_sel = self->slsap_sel = 0; + + memset(&self->settings, 0, sizeof(struct ircomm_params)); +} + +/* + * Function ircomm_tty_ias_register (self) + * + * Register with LM-IAS depending on which service type we are + * + */ +static void ircomm_tty_ias_register(struct ircomm_tty_cb *self) +{ + __u8 oct_seq[6]; + __u16 hints; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + /* Compute hint bits based on service */ + hints = irlmp_service_to_hint(S_COMM); + if (self->service_type & IRCOMM_3_WIRE_RAW) + hints |= irlmp_service_to_hint(S_PRINTER); + + /* Advertise IrCOMM hint bit in discovery */ + if (!self->skey) + self->skey = irlmp_register_service(hints); + /* Set up a discovery handler */ + if (!self->ckey) + self->ckey = irlmp_register_client(hints, + ircomm_tty_discovery_indication, + NULL, (void *) self); + + /* If already done, no need to do it again */ + if (self->obj) + return; + + if (self->service_type & IRCOMM_3_WIRE_RAW) { + /* Register IrLPT with LM-IAS */ + self->obj = irias_new_object("IrLPT", IAS_IRLPT_ID); + irias_add_integer_attrib(self->obj, "IrDA:IrLMP:LsapSel", + self->slsap_sel, IAS_KERNEL_ATTR); + } else { + /* Register IrCOMM with LM-IAS */ + self->obj = irias_new_object("IrDA:IrCOMM", IAS_IRCOMM_ID); + irias_add_integer_attrib(self->obj, "IrDA:TinyTP:LsapSel", + self->slsap_sel, IAS_KERNEL_ATTR); + + /* Code the parameters into the buffer */ + irda_param_pack(oct_seq, "bbbbbb", + IRCOMM_SERVICE_TYPE, 1, self->service_type, + IRCOMM_PORT_TYPE, 1, IRCOMM_SERIAL); + + /* Register parameters with LM-IAS */ + irias_add_octseq_attrib(self->obj, "Parameters", oct_seq, 6, + IAS_KERNEL_ATTR); + } + irias_insert_object(self->obj); +} + +/* + * Function ircomm_tty_ias_unregister (self) + * + * Remove our IAS object and client hook while connected. + * + */ +static void ircomm_tty_ias_unregister(struct ircomm_tty_cb *self) +{ + /* Remove LM-IAS object now so it is not reused. + * IrCOMM deals very poorly with multiple incoming connections. + * It should looks a lot more like IrNET, and "dup" a server TSAP + * to the application TSAP (based on various rules). + * This is a cheap workaround allowing multiple clients to + * connect to us. It will not always work. + * Each IrCOMM socket has an IAS entry. Incoming connection will + * pick the first one found. So, when we are fully connected, + * we remove our IAS entries so that the next IAS entry is used. + * We do that for *both* client and server, because a server + * can also create client instances. + * Jean II */ + if (self->obj) { + irias_delete_object(self->obj); + self->obj = NULL; + } + +#if 0 + /* Remove discovery handler. + * While we are connected, we no longer need to receive + * discovery events. This would be the case if there is + * multiple IrLAP interfaces. Jean II */ + if (self->ckey) { + irlmp_unregister_client(self->ckey); + self->ckey = NULL; + } +#endif +} + +/* + * Function ircomm_send_initial_parameters (self) + * + * Send initial parameters to the remote IrCOMM device. These parameters + * must be sent before any data. + */ +int ircomm_tty_send_initial_parameters(struct ircomm_tty_cb *self) +{ + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + + if (self->service_type & IRCOMM_3_WIRE_RAW) + return 0; + + /* + * Set default values, but only if the application for some reason + * haven't set them already + */ + pr_debug("%s(), data-rate = %d\n", __func__ , + self->settings.data_rate); + if (!self->settings.data_rate) + self->settings.data_rate = 9600; + pr_debug("%s(), data-format = %d\n", __func__ , + self->settings.data_format); + if (!self->settings.data_format) + self->settings.data_format = IRCOMM_WSIZE_8; /* 8N1 */ + + pr_debug("%s(), flow-control = %d\n", __func__ , + self->settings.flow_control); + /*self->settings.flow_control = IRCOMM_RTS_CTS_IN|IRCOMM_RTS_CTS_OUT;*/ + + /* Do not set delta values for the initial parameters */ + self->settings.dte = IRCOMM_DTR | IRCOMM_RTS; + + /* Only send service type parameter when we are the client */ + if (self->client) + ircomm_param_request(self, IRCOMM_SERVICE_TYPE, FALSE); + ircomm_param_request(self, IRCOMM_DATA_RATE, FALSE); + ircomm_param_request(self, IRCOMM_DATA_FORMAT, FALSE); + + /* For a 3 wire service, we just flush the last parameter and return */ + if (self->settings.service_type == IRCOMM_3_WIRE) { + ircomm_param_request(self, IRCOMM_FLOW_CONTROL, TRUE); + return 0; + } + + /* Only 9-wire service types continue here */ + ircomm_param_request(self, IRCOMM_FLOW_CONTROL, FALSE); +#if 0 + ircomm_param_request(self, IRCOMM_XON_XOFF, FALSE); + ircomm_param_request(self, IRCOMM_ENQ_ACK, FALSE); +#endif + /* Notify peer that we are ready to receive data */ + ircomm_param_request(self, IRCOMM_DTE, TRUE); + + return 0; +} + +/* + * Function ircomm_tty_discovery_indication (discovery) + * + * Remote device is discovered, try query the remote IAS to see which + * device it is, and which services it has. + * + */ +static void ircomm_tty_discovery_indication(discinfo_t *discovery, + DISCOVERY_MODE mode, + void *priv) +{ + struct ircomm_tty_cb *self; + struct ircomm_tty_info info; + + /* Important note : + * We need to drop all passive discoveries. + * The LSAP management of IrComm is deficient and doesn't deal + * with the case of two instance connecting to each other + * simultaneously (it will deadlock in LMP). + * The proper fix would be to use the same technique as in IrNET, + * to have one server socket and separate instances for the + * connecting/connected socket. + * The workaround is to drop passive discovery, which drastically + * reduce the probability of this happening. + * Jean II */ + if(mode == DISCOVERY_PASSIVE) + return; + + info.daddr = discovery->daddr; + info.saddr = discovery->saddr; + + self = priv; + ircomm_tty_do_event(self, IRCOMM_TTY_DISCOVERY_INDICATION, + NULL, &info); +} + +/* + * Function ircomm_tty_disconnect_indication (instance, sap, reason, skb) + * + * Link disconnected + * + */ +void ircomm_tty_disconnect_indication(void *instance, void *sap, + LM_REASON reason, + struct sk_buff *skb) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; + struct tty_struct *tty; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + tty = tty_port_tty_get(&self->port); + if (!tty) + return; + + /* This will stop control data transfers */ + self->flow = FLOW_STOP; + + /* Stop data transfers */ + tty->hw_stopped = 1; + + ircomm_tty_do_event(self, IRCOMM_TTY_DISCONNECT_INDICATION, NULL, + NULL); + tty_kref_put(tty); +} + +/* + * Function ircomm_tty_getvalue_confirm (result, obj_id, value, priv) + * + * Got result from the IAS query we make + * + */ +static void ircomm_tty_getvalue_confirm(int result, __u16 obj_id, + struct ias_value *value, + void *priv) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) priv; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + /* We probably don't need to make any more queries */ + iriap_close(self->iriap); + self->iriap = NULL; + + /* Check if request succeeded */ + if (result != IAS_SUCCESS) { + pr_debug("%s(), got NULL value!\n", __func__); + return; + } + + switch (value->type) { + case IAS_OCT_SEQ: + pr_debug("%s(), got octet sequence\n", __func__); + + irda_param_extract_all(self, value->t.oct_seq, value->len, + &ircomm_param_info); + + ircomm_tty_do_event(self, IRCOMM_TTY_GOT_PARAMETERS, NULL, + NULL); + break; + case IAS_INTEGER: + /* Got LSAP selector */ + pr_debug("%s(), got lsapsel = %d\n", __func__ , + value->t.integer); + + if (value->t.integer == -1) { + pr_debug("%s(), invalid value!\n", __func__); + } else + self->dlsap_sel = value->t.integer; + + ircomm_tty_do_event(self, IRCOMM_TTY_GOT_LSAPSEL, NULL, NULL); + break; + case IAS_MISSING: + pr_debug("%s(), got IAS_MISSING\n", __func__); + break; + default: + pr_debug("%s(), got unknown type!\n", __func__); + break; + } + irias_delete_value(value); +} + +/* + * Function ircomm_tty_connect_confirm (instance, sap, qos, max_sdu_size, skb) + * + * Connection confirmed + * + */ +void ircomm_tty_connect_confirm(void *instance, void *sap, + struct qos_info *qos, + __u32 max_data_size, + __u8 max_header_size, + struct sk_buff *skb) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + self->client = TRUE; + self->max_data_size = max_data_size; + self->max_header_size = max_header_size; + self->flow = FLOW_START; + + ircomm_tty_do_event(self, IRCOMM_TTY_CONNECT_CONFIRM, NULL, NULL); + + /* No need to kfree_skb - see ircomm_ttp_connect_confirm() */ +} + +/* + * Function ircomm_tty_connect_indication (instance, sap, qos, max_sdu_size, + * skb) + * + * we are discovered and being requested to connect by remote device ! + * + */ +void ircomm_tty_connect_indication(void *instance, void *sap, + struct qos_info *qos, + __u32 max_data_size, + __u8 max_header_size, + struct sk_buff *skb) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) instance; + int clen; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + self->client = FALSE; + self->max_data_size = max_data_size; + self->max_header_size = max_header_size; + self->flow = FLOW_START; + + clen = skb->data[0]; + if (clen) + irda_param_extract_all(self, skb->data+1, + IRDA_MIN(skb->len, clen), + &ircomm_param_info); + + ircomm_tty_do_event(self, IRCOMM_TTY_CONNECT_INDICATION, NULL, NULL); + + /* No need to kfree_skb - see ircomm_ttp_connect_indication() */ +} + +/* + * Function ircomm_tty_link_established (self) + * + * Called when the IrCOMM link is established + * + */ +void ircomm_tty_link_established(struct ircomm_tty_cb *self) +{ + struct tty_struct *tty; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + tty = tty_port_tty_get(&self->port); + if (!tty) + return; + + del_timer(&self->watchdog_timer); + + /* + * IrCOMM link is now up, and if we are not using hardware + * flow-control, then declare the hardware as running. Otherwise we + * will have to wait for the peer device (DCE) to raise the CTS + * line. + */ + if (tty_port_cts_enabled(&self->port) && + ((self->settings.dce & IRCOMM_CTS) == 0)) { + pr_debug("%s(), waiting for CTS ...\n", __func__); + goto put; + } else { + pr_debug("%s(), starting hardware!\n", __func__); + + tty->hw_stopped = 0; + + /* Wake up processes blocked on open */ + wake_up_interruptible(&self->port.open_wait); + } + + schedule_work(&self->tqueue); +put: + tty_kref_put(tty); +} + +/* + * Function ircomm_tty_start_watchdog_timer (self, timeout) + * + * Start the watchdog timer. This timer is used to make sure that any + * connection attempt is successful, and if not, we will retry after + * the timeout + */ +static void ircomm_tty_start_watchdog_timer(struct ircomm_tty_cb *self, + int timeout) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + irda_start_timer(&self->watchdog_timer, timeout, (void *) self, + ircomm_tty_watchdog_timer_expired); +} + +/* + * Function ircomm_tty_watchdog_timer_expired (data) + * + * Called when the connect procedure have taken to much time. + * + */ +static void ircomm_tty_watchdog_timer_expired(void *data) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) data; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + ircomm_tty_do_event(self, IRCOMM_TTY_WD_TIMER_EXPIRED, NULL, NULL); +} + + +/* + * Function ircomm_tty_do_event (self, event, skb) + * + * Process event + * + */ +int ircomm_tty_do_event(struct ircomm_tty_cb *self, IRCOMM_TTY_EVENT event, + struct sk_buff *skb, struct ircomm_tty_info *info) +{ + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + + pr_debug("%s: state=%s, event=%s\n", __func__ , + ircomm_tty_state[self->state], ircomm_tty_event[event]); + + return (*state[self->state])(self, event, skb, info); +} + +/* + * Function ircomm_tty_next_state (self, state) + * + * Switch state + * + */ +static inline void ircomm_tty_next_state(struct ircomm_tty_cb *self, IRCOMM_TTY_STATE state) +{ + /* + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return;); + + pr_debug("%s: next state=%s, service type=%d\n", __func__ , + ircomm_tty_state[self->state], self->service_type); + */ + self->state = state; +} + +/* + * Function ircomm_tty_state_idle (self, event, skb, info) + * + * Just hanging around + * + */ +static int ircomm_tty_state_idle(struct ircomm_tty_cb *self, + IRCOMM_TTY_EVENT event, + struct sk_buff *skb, + struct ircomm_tty_info *info) +{ + int ret = 0; + + pr_debug("%s: state=%s, event=%s\n", __func__ , + ircomm_tty_state[self->state], ircomm_tty_event[event]); + switch (event) { + case IRCOMM_TTY_ATTACH_CABLE: + /* Try to discover any remote devices */ + ircomm_tty_start_watchdog_timer(self, 3*HZ); + ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH); + + irlmp_discovery_request(DISCOVERY_DEFAULT_SLOTS); + break; + case IRCOMM_TTY_DISCOVERY_INDICATION: + self->daddr = info->daddr; + self->saddr = info->saddr; + + if (self->iriap) { + net_warn_ratelimited("%s(), busy with a previous query\n", + __func__); + return -EBUSY; + } + + self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self, + ircomm_tty_getvalue_confirm); + + iriap_getvaluebyclass_request(self->iriap, + self->saddr, self->daddr, + "IrDA:IrCOMM", "Parameters"); + + ircomm_tty_start_watchdog_timer(self, 3*HZ); + ircomm_tty_next_state(self, IRCOMM_TTY_QUERY_PARAMETERS); + break; + case IRCOMM_TTY_CONNECT_INDICATION: + del_timer(&self->watchdog_timer); + + /* Accept connection */ + ircomm_connect_response(self->ircomm, NULL); + ircomm_tty_next_state(self, IRCOMM_TTY_READY); + break; + case IRCOMM_TTY_WD_TIMER_EXPIRED: + /* Just stay idle */ + break; + case IRCOMM_TTY_DETACH_CABLE: + ircomm_tty_next_state(self, IRCOMM_TTY_IDLE); + break; + default: + pr_debug("%s(), unknown event: %s\n", __func__ , + ircomm_tty_event[event]); + ret = -EINVAL; + } + return ret; +} + +/* + * Function ircomm_tty_state_search (self, event, skb, info) + * + * Trying to discover an IrCOMM device + * + */ +static int ircomm_tty_state_search(struct ircomm_tty_cb *self, + IRCOMM_TTY_EVENT event, + struct sk_buff *skb, + struct ircomm_tty_info *info) +{ + int ret = 0; + + pr_debug("%s: state=%s, event=%s\n", __func__ , + ircomm_tty_state[self->state], ircomm_tty_event[event]); + + switch (event) { + case IRCOMM_TTY_DISCOVERY_INDICATION: + self->daddr = info->daddr; + self->saddr = info->saddr; + + if (self->iriap) { + net_warn_ratelimited("%s(), busy with a previous query\n", + __func__); + return -EBUSY; + } + + self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self, + ircomm_tty_getvalue_confirm); + + if (self->service_type == IRCOMM_3_WIRE_RAW) { + iriap_getvaluebyclass_request(self->iriap, self->saddr, + self->daddr, "IrLPT", + "IrDA:IrLMP:LsapSel"); + ircomm_tty_next_state(self, IRCOMM_TTY_QUERY_LSAP_SEL); + } else { + iriap_getvaluebyclass_request(self->iriap, self->saddr, + self->daddr, + "IrDA:IrCOMM", + "Parameters"); + + ircomm_tty_next_state(self, IRCOMM_TTY_QUERY_PARAMETERS); + } + ircomm_tty_start_watchdog_timer(self, 3*HZ); + break; + case IRCOMM_TTY_CONNECT_INDICATION: + del_timer(&self->watchdog_timer); + ircomm_tty_ias_unregister(self); + + /* Accept connection */ + ircomm_connect_response(self->ircomm, NULL); + ircomm_tty_next_state(self, IRCOMM_TTY_READY); + break; + case IRCOMM_TTY_WD_TIMER_EXPIRED: +#if 1 + /* Give up */ +#else + /* Try to discover any remote devices */ + ircomm_tty_start_watchdog_timer(self, 3*HZ); + irlmp_discovery_request(DISCOVERY_DEFAULT_SLOTS); +#endif + break; + case IRCOMM_TTY_DETACH_CABLE: + ircomm_tty_next_state(self, IRCOMM_TTY_IDLE); + break; + default: + pr_debug("%s(), unknown event: %s\n", __func__ , + ircomm_tty_event[event]); + ret = -EINVAL; + } + return ret; +} + +/* + * Function ircomm_tty_state_query (self, event, skb, info) + * + * Querying the remote LM-IAS for IrCOMM parameters + * + */ +static int ircomm_tty_state_query_parameters(struct ircomm_tty_cb *self, + IRCOMM_TTY_EVENT event, + struct sk_buff *skb, + struct ircomm_tty_info *info) +{ + int ret = 0; + + pr_debug("%s: state=%s, event=%s\n", __func__ , + ircomm_tty_state[self->state], ircomm_tty_event[event]); + + switch (event) { + case IRCOMM_TTY_GOT_PARAMETERS: + if (self->iriap) { + net_warn_ratelimited("%s(), busy with a previous query\n", + __func__); + return -EBUSY; + } + + self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self, + ircomm_tty_getvalue_confirm); + + iriap_getvaluebyclass_request(self->iriap, self->saddr, + self->daddr, "IrDA:IrCOMM", + "IrDA:TinyTP:LsapSel"); + + ircomm_tty_start_watchdog_timer(self, 3*HZ); + ircomm_tty_next_state(self, IRCOMM_TTY_QUERY_LSAP_SEL); + break; + case IRCOMM_TTY_WD_TIMER_EXPIRED: + /* Go back to search mode */ + ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH); + ircomm_tty_start_watchdog_timer(self, 3*HZ); + break; + case IRCOMM_TTY_CONNECT_INDICATION: + del_timer(&self->watchdog_timer); + ircomm_tty_ias_unregister(self); + + /* Accept connection */ + ircomm_connect_response(self->ircomm, NULL); + ircomm_tty_next_state(self, IRCOMM_TTY_READY); + break; + case IRCOMM_TTY_DETACH_CABLE: + ircomm_tty_next_state(self, IRCOMM_TTY_IDLE); + break; + default: + pr_debug("%s(), unknown event: %s\n", __func__ , + ircomm_tty_event[event]); + ret = -EINVAL; + } + return ret; +} + +/* + * Function ircomm_tty_state_query_lsap_sel (self, event, skb, info) + * + * Query remote LM-IAS for the LSAP selector which we can connect to + * + */ +static int ircomm_tty_state_query_lsap_sel(struct ircomm_tty_cb *self, + IRCOMM_TTY_EVENT event, + struct sk_buff *skb, + struct ircomm_tty_info *info) +{ + int ret = 0; + + pr_debug("%s: state=%s, event=%s\n", __func__ , + ircomm_tty_state[self->state], ircomm_tty_event[event]); + + switch (event) { + case IRCOMM_TTY_GOT_LSAPSEL: + /* Connect to remote device */ + ret = ircomm_connect_request(self->ircomm, self->dlsap_sel, + self->saddr, self->daddr, + NULL, self->service_type); + ircomm_tty_start_watchdog_timer(self, 3*HZ); + ircomm_tty_next_state(self, IRCOMM_TTY_SETUP); + break; + case IRCOMM_TTY_WD_TIMER_EXPIRED: + /* Go back to search mode */ + ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH); + ircomm_tty_start_watchdog_timer(self, 3*HZ); + break; + case IRCOMM_TTY_CONNECT_INDICATION: + del_timer(&self->watchdog_timer); + ircomm_tty_ias_unregister(self); + + /* Accept connection */ + ircomm_connect_response(self->ircomm, NULL); + ircomm_tty_next_state(self, IRCOMM_TTY_READY); + break; + case IRCOMM_TTY_DETACH_CABLE: + ircomm_tty_next_state(self, IRCOMM_TTY_IDLE); + break; + default: + pr_debug("%s(), unknown event: %s\n", __func__ , + ircomm_tty_event[event]); + ret = -EINVAL; + } + return ret; +} + +/* + * Function ircomm_tty_state_setup (self, event, skb, info) + * + * Trying to connect + * + */ +static int ircomm_tty_state_setup(struct ircomm_tty_cb *self, + IRCOMM_TTY_EVENT event, + struct sk_buff *skb, + struct ircomm_tty_info *info) +{ + int ret = 0; + + pr_debug("%s: state=%s, event=%s\n", __func__ , + ircomm_tty_state[self->state], ircomm_tty_event[event]); + + switch (event) { + case IRCOMM_TTY_CONNECT_CONFIRM: + del_timer(&self->watchdog_timer); + ircomm_tty_ias_unregister(self); + + /* + * Send initial parameters. This will also send out queued + * parameters waiting for the connection to come up + */ + ircomm_tty_send_initial_parameters(self); + ircomm_tty_link_established(self); + ircomm_tty_next_state(self, IRCOMM_TTY_READY); + break; + case IRCOMM_TTY_CONNECT_INDICATION: + del_timer(&self->watchdog_timer); + ircomm_tty_ias_unregister(self); + + /* Accept connection */ + ircomm_connect_response(self->ircomm, NULL); + ircomm_tty_next_state(self, IRCOMM_TTY_READY); + break; + case IRCOMM_TTY_WD_TIMER_EXPIRED: + /* Go back to search mode */ + ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH); + ircomm_tty_start_watchdog_timer(self, 3*HZ); + break; + case IRCOMM_TTY_DETACH_CABLE: + /* ircomm_disconnect_request(self->ircomm, NULL); */ + ircomm_tty_next_state(self, IRCOMM_TTY_IDLE); + break; + default: + pr_debug("%s(), unknown event: %s\n", __func__ , + ircomm_tty_event[event]); + ret = -EINVAL; + } + return ret; +} + +/* + * Function ircomm_tty_state_ready (self, event, skb, info) + * + * IrCOMM is now connected + * + */ +static int ircomm_tty_state_ready(struct ircomm_tty_cb *self, + IRCOMM_TTY_EVENT event, + struct sk_buff *skb, + struct ircomm_tty_info *info) +{ + int ret = 0; + + switch (event) { + case IRCOMM_TTY_DATA_REQUEST: + ret = ircomm_data_request(self->ircomm, skb); + break; + case IRCOMM_TTY_DETACH_CABLE: + ircomm_disconnect_request(self->ircomm, NULL); + ircomm_tty_next_state(self, IRCOMM_TTY_IDLE); + break; + case IRCOMM_TTY_DISCONNECT_INDICATION: + ircomm_tty_ias_register(self); + ircomm_tty_next_state(self, IRCOMM_TTY_SEARCH); + ircomm_tty_start_watchdog_timer(self, 3*HZ); + + if (self->port.flags & ASYNC_CHECK_CD) { + /* Drop carrier */ + self->settings.dce = IRCOMM_DELTA_CD; + ircomm_tty_check_modem_status(self); + } else { + pr_debug("%s(), hanging up!\n", __func__); + tty_port_tty_hangup(&self->port, false); + } + break; + default: + pr_debug("%s(), unknown event: %s\n", __func__ , + ircomm_tty_event[event]); + ret = -EINVAL; + } + return ret; +} + diff --git a/kernel/net/irda/ircomm/ircomm_tty_ioctl.c b/kernel/net/irda/ircomm/ircomm_tty_ioctl.c new file mode 100644 index 000000000..75ccdbd07 --- /dev/null +++ b/kernel/net/irda/ircomm/ircomm_tty_ioctl.c @@ -0,0 +1,413 @@ +/********************************************************************* + * + * Filename: ircomm_tty_ioctl.c + * Version: + * Description: + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Thu Jun 10 14:39:09 1999 + * Modified at: Wed Jan 5 14:45:43 2000 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + ********************************************************************/ + +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/termios.h> +#include <linux/tty.h> +#include <linux/serial.h> + +#include <asm/uaccess.h> + +#include <net/irda/irda.h> +#include <net/irda/irmod.h> + +#include <net/irda/ircomm_core.h> +#include <net/irda/ircomm_param.h> +#include <net/irda/ircomm_tty_attach.h> +#include <net/irda/ircomm_tty.h> + +#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) + +/* + * Function ircomm_tty_change_speed (driver) + * + * Change speed of the driver. If the remote device is a DCE, then this + * should make it change the speed of its serial port + */ +static void ircomm_tty_change_speed(struct ircomm_tty_cb *self, + struct tty_struct *tty) +{ + unsigned int cflag, cval; + int baud; + + if (!self->ircomm) + return; + + cflag = tty->termios.c_cflag; + + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: cval = IRCOMM_WSIZE_5; break; + case CS6: cval = IRCOMM_WSIZE_6; break; + case CS7: cval = IRCOMM_WSIZE_7; break; + case CS8: cval = IRCOMM_WSIZE_8; break; + default: cval = IRCOMM_WSIZE_5; break; + } + if (cflag & CSTOPB) + cval |= IRCOMM_2_STOP_BIT; + + if (cflag & PARENB) + cval |= IRCOMM_PARITY_ENABLE; + if (!(cflag & PARODD)) + cval |= IRCOMM_PARITY_EVEN; + + /* Determine divisor based on baud rate */ + baud = tty_get_baud_rate(tty); + if (!baud) + baud = 9600; /* B0 transition handled in rs_set_termios */ + + self->settings.data_rate = baud; + ircomm_param_request(self, IRCOMM_DATA_RATE, FALSE); + + /* CTS flow control flag and modem status interrupts */ + if (cflag & CRTSCTS) { + self->port.flags |= ASYNC_CTS_FLOW; + self->settings.flow_control |= IRCOMM_RTS_CTS_IN; + /* This got me. Bummer. Jean II */ + if (self->service_type == IRCOMM_3_WIRE_RAW) + net_warn_ratelimited("%s(), enabling RTS/CTS on link that doesn't support it (3-wire-raw)\n", + __func__); + } else { + self->port.flags &= ~ASYNC_CTS_FLOW; + self->settings.flow_control &= ~IRCOMM_RTS_CTS_IN; + } + if (cflag & CLOCAL) + self->port.flags &= ~ASYNC_CHECK_CD; + else + self->port.flags |= ASYNC_CHECK_CD; +#if 0 + /* + * Set up parity check flag + */ + + if (I_INPCK(self->tty)) + driver->read_status_mask |= LSR_FE | LSR_PE; + if (I_BRKINT(driver->tty) || I_PARMRK(driver->tty)) + driver->read_status_mask |= LSR_BI; + + /* + * Characters to ignore + */ + driver->ignore_status_mask = 0; + if (I_IGNPAR(driver->tty)) + driver->ignore_status_mask |= LSR_PE | LSR_FE; + + if (I_IGNBRK(self->tty)) { + self->ignore_status_mask |= LSR_BI; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (I_IGNPAR(self->tty)) + self->ignore_status_mask |= LSR_OE; + } +#endif + self->settings.data_format = cval; + + ircomm_param_request(self, IRCOMM_DATA_FORMAT, FALSE); + ircomm_param_request(self, IRCOMM_FLOW_CONTROL, TRUE); +} + +/* + * Function ircomm_tty_set_termios (tty, old_termios) + * + * This routine allows the tty driver to be notified when device's + * termios settings have changed. Note that a well-designed tty driver + * should be prepared to accept the case where old == NULL, and try to + * do something rational. + */ +void ircomm_tty_set_termios(struct tty_struct *tty, + struct ktermios *old_termios) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; + unsigned int cflag = tty->termios.c_cflag; + + if ((cflag == old_termios->c_cflag) && + (RELEVANT_IFLAG(tty->termios.c_iflag) == + RELEVANT_IFLAG(old_termios->c_iflag))) + { + return; + } + + ircomm_tty_change_speed(self, tty); + + /* Handle transition to B0 status */ + if ((old_termios->c_cflag & CBAUD) && + !(cflag & CBAUD)) { + self->settings.dte &= ~(IRCOMM_DTR|IRCOMM_RTS); + ircomm_param_request(self, IRCOMM_DTE, TRUE); + } + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && + (cflag & CBAUD)) { + self->settings.dte |= IRCOMM_DTR; + if (!(tty->termios.c_cflag & CRTSCTS) || + !test_bit(TTY_THROTTLED, &tty->flags)) { + self->settings.dte |= IRCOMM_RTS; + } + ircomm_param_request(self, IRCOMM_DTE, TRUE); + } + + /* Handle turning off CRTSCTS */ + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios.c_cflag & CRTSCTS)) + { + tty->hw_stopped = 0; + ircomm_tty_start(tty); + } +} + +/* + * Function ircomm_tty_tiocmget (tty) + * + * + * + */ +int ircomm_tty_tiocmget(struct tty_struct *tty) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; + unsigned int result; + + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + result = ((self->settings.dte & IRCOMM_RTS) ? TIOCM_RTS : 0) + | ((self->settings.dte & IRCOMM_DTR) ? TIOCM_DTR : 0) + | ((self->settings.dce & IRCOMM_CD) ? TIOCM_CAR : 0) + | ((self->settings.dce & IRCOMM_RI) ? TIOCM_RNG : 0) + | ((self->settings.dce & IRCOMM_DSR) ? TIOCM_DSR : 0) + | ((self->settings.dce & IRCOMM_CTS) ? TIOCM_CTS : 0); + return result; +} + +/* + * Function ircomm_tty_tiocmset (tty, set, clear) + * + * + * + */ +int ircomm_tty_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; + + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRCOMM_TTY_MAGIC, return -1;); + + if (set & TIOCM_RTS) + self->settings.dte |= IRCOMM_RTS; + if (set & TIOCM_DTR) + self->settings.dte |= IRCOMM_DTR; + + if (clear & TIOCM_RTS) + self->settings.dte &= ~IRCOMM_RTS; + if (clear & TIOCM_DTR) + self->settings.dte &= ~IRCOMM_DTR; + + if ((set|clear) & TIOCM_RTS) + self->settings.dte |= IRCOMM_DELTA_RTS; + if ((set|clear) & TIOCM_DTR) + self->settings.dte |= IRCOMM_DELTA_DTR; + + ircomm_param_request(self, IRCOMM_DTE, TRUE); + + return 0; +} + +/* + * Function get_serial_info (driver, retinfo) + * + * + * + */ +static int ircomm_tty_get_serial_info(struct ircomm_tty_cb *self, + struct serial_struct __user *retinfo) +{ + struct serial_struct info; + + if (!retinfo) + return -EFAULT; + + memset(&info, 0, sizeof(info)); + info.line = self->line; + info.flags = self->port.flags; + info.baud_base = self->settings.data_rate; + info.close_delay = self->port.close_delay; + info.closing_wait = self->port.closing_wait; + + /* For compatibility */ + info.type = PORT_16550A; + info.port = 0; + info.irq = 0; + info.xmit_fifo_size = 0; + info.hub6 = 0; + info.custom_divisor = 0; + + if (copy_to_user(retinfo, &info, sizeof(*retinfo))) + return -EFAULT; + + return 0; +} + +/* + * Function set_serial_info (driver, new_info) + * + * + * + */ +static int ircomm_tty_set_serial_info(struct ircomm_tty_cb *self, + struct serial_struct __user *new_info) +{ +#if 0 + struct serial_struct new_serial; + struct ircomm_tty_cb old_state, *state; + + if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) + return -EFAULT; + + + state = self + old_state = *self; + + if (!capable(CAP_SYS_ADMIN)) { + if ((new_serial.baud_base != state->settings.data_rate) || + (new_serial.close_delay != state->close_delay) || + ((new_serial.flags & ~ASYNC_USR_MASK) != + (self->flags & ~ASYNC_USR_MASK))) + return -EPERM; + state->flags = ((state->flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + self->flags = ((self->flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + /* self->custom_divisor = new_serial.custom_divisor; */ + goto check_and_exit; + } + + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + + if (self->settings.data_rate != new_serial.baud_base) { + self->settings.data_rate = new_serial.baud_base; + ircomm_param_request(self, IRCOMM_DATA_RATE, TRUE); + } + + self->close_delay = new_serial.close_delay * HZ/100; + self->closing_wait = new_serial.closing_wait * HZ/100; + /* self->custom_divisor = new_serial.custom_divisor; */ + + self->flags = ((self->flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS)); + self->tty->low_latency = (self->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + check_and_exit: + + if (self->flags & ASYNC_INITIALIZED) { + if (((old_state.flags & ASYNC_SPD_MASK) != + (self->flags & ASYNC_SPD_MASK)) || + (old_driver.custom_divisor != driver->custom_divisor)) { + if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + driver->tty->alt_speed = 57600; + if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + driver->tty->alt_speed = 115200; + if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + driver->tty->alt_speed = 230400; + if ((driver->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + driver->tty->alt_speed = 460800; + ircomm_tty_change_speed(driver); + } + } +#endif + return 0; +} + +/* + * Function ircomm_tty_ioctl (tty, cmd, arg) + * + * + * + */ +int ircomm_tty_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct ircomm_tty_cb *self = (struct ircomm_tty_cb *) tty->driver_data; + int ret = 0; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) && + (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case TIOCGSERIAL: + ret = ircomm_tty_get_serial_info(self, (struct serial_struct __user *) arg); + break; + case TIOCSSERIAL: + ret = ircomm_tty_set_serial_info(self, (struct serial_struct __user *) arg); + break; + case TIOCMIWAIT: + pr_debug("(), TIOCMIWAIT, not impl!\n"); + break; + + case TIOCGICOUNT: + pr_debug("%s(), TIOCGICOUNT not impl!\n", __func__); +#if 0 + save_flags(flags); cli(); + cnow = driver->icount; + restore_flags(flags); + p_cuser = (struct serial_icounter_struct __user *) arg; + if (put_user(cnow.cts, &p_cuser->cts) || + put_user(cnow.dsr, &p_cuser->dsr) || + put_user(cnow.rng, &p_cuser->rng) || + put_user(cnow.dcd, &p_cuser->dcd) || + put_user(cnow.rx, &p_cuser->rx) || + put_user(cnow.tx, &p_cuser->tx) || + put_user(cnow.frame, &p_cuser->frame) || + put_user(cnow.overrun, &p_cuser->overrun) || + put_user(cnow.parity, &p_cuser->parity) || + put_user(cnow.brk, &p_cuser->brk) || + put_user(cnow.buf_overrun, &p_cuser->buf_overrun)) + return -EFAULT; +#endif + return 0; + default: + ret = -ENOIOCTLCMD; /* ioctls which we must ignore */ + } + return ret; +} + + + diff --git a/kernel/net/irda/irda_device.c b/kernel/net/irda/irda_device.c new file mode 100644 index 000000000..856736656 --- /dev/null +++ b/kernel/net/irda/irda_device.c @@ -0,0 +1,316 @@ +/********************************************************************* + * + * Filename: irda_device.c + * Version: 0.9 + * Description: Utility functions used by the device drivers + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Sat Oct 9 09:22:27 1999 + * Modified at: Sun Jan 23 17:41:24 2000 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved. + * Copyright (c) 2000-2001 Jean Tourrilhes <jt@hpl.hp.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + ********************************************************************/ + +#include <linux/string.h> +#include <linux/proc_fs.h> +#include <linux/skbuff.h> +#include <linux/capability.h> +#include <linux/if.h> +#include <linux/if_ether.h> +#include <linux/if_arp.h> +#include <linux/netdevice.h> +#include <linux/init.h> +#include <linux/tty.h> +#include <linux/kmod.h> +#include <linux/spinlock.h> +#include <linux/slab.h> +#include <linux/export.h> + +#include <asm/ioctls.h> +#include <asm/uaccess.h> +#include <asm/dma.h> +#include <asm/io.h> + +#include <net/irda/irda_device.h> +#include <net/irda/irlap.h> +#include <net/irda/timer.h> +#include <net/irda/wrapper.h> + +static void __irda_task_delete(struct irda_task *task); + +static hashbin_t *dongles = NULL; +static hashbin_t *tasks = NULL; + +static void irda_task_timer_expired(void *data); + +int __init irda_device_init( void) +{ + dongles = hashbin_new(HB_NOLOCK); + if (dongles == NULL) { + net_warn_ratelimited("IrDA: Can't allocate dongles hashbin!\n"); + return -ENOMEM; + } + spin_lock_init(&dongles->hb_spinlock); + + tasks = hashbin_new(HB_LOCK); + if (tasks == NULL) { + net_warn_ratelimited("IrDA: Can't allocate tasks hashbin!\n"); + hashbin_delete(dongles, NULL); + return -ENOMEM; + } + + /* We no longer initialise the driver ourselves here, we let + * the system do it for us... - Jean II */ + + return 0; +} + +static void leftover_dongle(void *arg) +{ + struct dongle_reg *reg = arg; + net_warn_ratelimited("IrDA: Dongle type %x not unregistered\n", + reg->type); +} + +void irda_device_cleanup(void) +{ + hashbin_delete(tasks, (FREE_FUNC) __irda_task_delete); + + hashbin_delete(dongles, leftover_dongle); +} + +/* + * Function irda_device_set_media_busy (self, status) + * + * Called when we have detected that another station is transmitting + * in contention mode. + */ +void irda_device_set_media_busy(struct net_device *dev, int status) +{ + struct irlap_cb *self; + + pr_debug("%s(%s)\n", __func__, status ? "TRUE" : "FALSE"); + + self = (struct irlap_cb *) dev->atalk_ptr; + + /* Some drivers may enable the receive interrupt before calling + * irlap_open(), or they may disable the receive interrupt + * after calling irlap_close(). + * The IrDA stack is protected from this in irlap_driver_rcv(). + * However, the driver calls directly the wrapper, that calls + * us directly. Make sure we protect ourselves. + * Jean II */ + if (!self || self->magic != LAP_MAGIC) + return; + + if (status) { + self->media_busy = TRUE; + if (status == SMALL) + irlap_start_mbusy_timer(self, SMALLBUSY_TIMEOUT); + else + irlap_start_mbusy_timer(self, MEDIABUSY_TIMEOUT); + pr_debug("Media busy!\n"); + } else { + self->media_busy = FALSE; + irlap_stop_mbusy_timer(self); + } +} +EXPORT_SYMBOL(irda_device_set_media_busy); + + +/* + * Function irda_device_is_receiving (dev) + * + * Check if the device driver is currently receiving data + * + */ +int irda_device_is_receiving(struct net_device *dev) +{ + struct if_irda_req req; + int ret; + + if (!dev->netdev_ops->ndo_do_ioctl) { + net_err_ratelimited("%s: do_ioctl not impl. by device driver\n", + __func__); + return -1; + } + + ret = (dev->netdev_ops->ndo_do_ioctl)(dev, (struct ifreq *) &req, + SIOCGRECEIVING); + if (ret < 0) + return ret; + + return req.ifr_receiving; +} + +static void __irda_task_delete(struct irda_task *task) +{ + del_timer(&task->timer); + + kfree(task); +} + +static void irda_task_delete(struct irda_task *task) +{ + /* Unregister task */ + hashbin_remove(tasks, (long) task, NULL); + + __irda_task_delete(task); +} + +/* + * Function irda_task_kick (task) + * + * Tries to execute a task possible multiple times until the task is either + * finished, or askes for a timeout. When a task is finished, we do post + * processing, and notify the parent task, that is waiting for this task + * to complete. + */ +static int irda_task_kick(struct irda_task *task) +{ + int finished = TRUE; + int count = 0; + int timeout; + + IRDA_ASSERT(task != NULL, return -1;); + IRDA_ASSERT(task->magic == IRDA_TASK_MAGIC, return -1;); + + /* Execute task until it's finished, or askes for a timeout */ + do { + timeout = task->function(task); + if (count++ > 100) { + net_err_ratelimited("%s: error in task handler!\n", + __func__); + irda_task_delete(task); + return TRUE; + } + } while ((timeout == 0) && (task->state != IRDA_TASK_DONE)); + + if (timeout < 0) { + net_err_ratelimited("%s: Error executing task!\n", __func__); + irda_task_delete(task); + return TRUE; + } + + /* Check if we are finished */ + if (task->state == IRDA_TASK_DONE) { + del_timer(&task->timer); + + /* Do post processing */ + if (task->finished) + task->finished(task); + + /* Notify parent */ + if (task->parent) { + /* Check if parent is waiting for us to complete */ + if (task->parent->state == IRDA_TASK_CHILD_WAIT) { + task->parent->state = IRDA_TASK_CHILD_DONE; + + /* Stop timer now that we are here */ + del_timer(&task->parent->timer); + + /* Kick parent task */ + irda_task_kick(task->parent); + } + } + irda_task_delete(task); + } else if (timeout > 0) { + irda_start_timer(&task->timer, timeout, (void *) task, + irda_task_timer_expired); + finished = FALSE; + } else { + pr_debug("%s(), not finished, and no timeout!\n", + __func__); + finished = FALSE; + } + + return finished; +} + +/* + * Function irda_task_timer_expired (data) + * + * Task time has expired. We now try to execute task (again), and restart + * the timer if the task has not finished yet + */ +static void irda_task_timer_expired(void *data) +{ + struct irda_task *task; + + task = data; + + irda_task_kick(task); +} + +/* + * Function irda_device_setup (dev) + * + * This function should be used by low level device drivers in a similar way + * as ether_setup() is used by normal network device drivers + */ +static void irda_device_setup(struct net_device *dev) +{ + dev->hard_header_len = 0; + dev->addr_len = LAP_ALEN; + + dev->type = ARPHRD_IRDA; + dev->tx_queue_len = 8; /* Window size + 1 s-frame */ + + memset(dev->broadcast, 0xff, LAP_ALEN); + + dev->mtu = 2048; + dev->flags = IFF_NOARP; +} + +/* + * Funciton alloc_irdadev + * Allocates and sets up an IRDA device in a manner similar to + * alloc_etherdev. + */ +struct net_device *alloc_irdadev(int sizeof_priv) +{ + return alloc_netdev(sizeof_priv, "irda%d", NET_NAME_UNKNOWN, + irda_device_setup); +} +EXPORT_SYMBOL(alloc_irdadev); + +#ifdef CONFIG_ISA_DMA_API +/* + * Function setup_dma (idev, buffer, count, mode) + * + * Setup the DMA channel. Commonly used by LPC FIR drivers + * + */ +void irda_setup_dma(int channel, dma_addr_t buffer, int count, int mode) +{ + unsigned long flags; + + flags = claim_dma_lock(); + + disable_dma(channel); + clear_dma_ff(channel); + set_dma_mode(channel, mode); + set_dma_addr(channel, buffer); + set_dma_count(channel, count); + enable_dma(channel); + + release_dma_lock(flags); +} +EXPORT_SYMBOL(irda_setup_dma); +#endif diff --git a/kernel/net/irda/iriap.c b/kernel/net/irda/iriap.c new file mode 100644 index 000000000..4a7ae32af --- /dev/null +++ b/kernel/net/irda/iriap.c @@ -0,0 +1,1081 @@ +/********************************************************************* + * + * Filename: iriap.c + * Version: 0.8 + * Description: Information Access Protocol (IAP) + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Thu Aug 21 00:02:07 1997 + * Modified at: Sat Dec 25 16:42:42 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, + * All Rights Reserved. + * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/skbuff.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/seq_file.h> +#include <linux/slab.h> + +#include <asm/byteorder.h> +#include <asm/unaligned.h> + +#include <net/irda/irda.h> +#include <net/irda/irttp.h> +#include <net/irda/irlmp.h> +#include <net/irda/irias_object.h> +#include <net/irda/iriap_event.h> +#include <net/irda/iriap.h> + +/* FIXME: This one should go in irlmp.c */ +static const char *const ias_charset_types[] __maybe_unused = { + "CS_ASCII", + "CS_ISO_8859_1", + "CS_ISO_8859_2", + "CS_ISO_8859_3", + "CS_ISO_8859_4", + "CS_ISO_8859_5", + "CS_ISO_8859_6", + "CS_ISO_8859_7", + "CS_ISO_8859_8", + "CS_ISO_8859_9", + "CS_UNICODE" +}; + +static hashbin_t *iriap = NULL; +static void *service_handle; + +static void __iriap_close(struct iriap_cb *self); +static int iriap_register_lsap(struct iriap_cb *self, __u8 slsap_sel, int mode); +static void iriap_disconnect_indication(void *instance, void *sap, + LM_REASON reason, struct sk_buff *skb); +static void iriap_connect_indication(void *instance, void *sap, + struct qos_info *qos, __u32 max_sdu_size, + __u8 max_header_size, + struct sk_buff *skb); +static void iriap_connect_confirm(void *instance, void *sap, + struct qos_info *qos, + __u32 max_sdu_size, __u8 max_header_size, + struct sk_buff *skb); +static int iriap_data_indication(void *instance, void *sap, + struct sk_buff *skb); + +static void iriap_watchdog_timer_expired(void *data); + +static inline void iriap_start_watchdog_timer(struct iriap_cb *self, + int timeout) +{ + irda_start_timer(&self->watchdog_timer, timeout, self, + iriap_watchdog_timer_expired); +} + +static struct lock_class_key irias_objects_key; + +/* + * Function iriap_init (void) + * + * Initializes the IrIAP layer, called by the module initialization code + * in irmod.c + */ +int __init iriap_init(void) +{ + struct ias_object *obj; + struct iriap_cb *server; + __u8 oct_seq[6]; + __u16 hints; + + /* Allocate master array */ + iriap = hashbin_new(HB_LOCK); + if (!iriap) + return -ENOMEM; + + /* Object repository - defined in irias_object.c */ + irias_objects = hashbin_new(HB_LOCK); + if (!irias_objects) { + net_warn_ratelimited("%s: Can't allocate irias_objects hashbin!\n", + __func__); + hashbin_delete(iriap, NULL); + return -ENOMEM; + } + + lockdep_set_class_and_name(&irias_objects->hb_spinlock, &irias_objects_key, + "irias_objects"); + + /* + * Register some default services for IrLMP + */ + hints = irlmp_service_to_hint(S_COMPUTER); + service_handle = irlmp_register_service(hints); + + /* Register the Device object with LM-IAS */ + obj = irias_new_object("Device", IAS_DEVICE_ID); + irias_add_string_attrib(obj, "DeviceName", "Linux", IAS_KERNEL_ATTR); + + oct_seq[0] = 0x01; /* Version 1 */ + oct_seq[1] = 0x00; /* IAS support bits */ + oct_seq[2] = 0x00; /* LM-MUX support bits */ +#ifdef CONFIG_IRDA_ULTRA + oct_seq[2] |= 0x04; /* Connectionless Data support */ +#endif + irias_add_octseq_attrib(obj, "IrLMPSupport", oct_seq, 3, + IAS_KERNEL_ATTR); + irias_insert_object(obj); + + /* + * Register server support with IrLMP so we can accept incoming + * connections + */ + server = iriap_open(LSAP_IAS, IAS_SERVER, NULL, NULL); + if (!server) { + pr_debug("%s(), unable to open server\n", __func__); + return -1; + } + iriap_register_lsap(server, LSAP_IAS, IAS_SERVER); + + return 0; +} + +/* + * Function iriap_cleanup (void) + * + * Initializes the IrIAP layer, called by the module cleanup code in + * irmod.c + */ +void iriap_cleanup(void) +{ + irlmp_unregister_service(service_handle); + + hashbin_delete(iriap, (FREE_FUNC) __iriap_close); + hashbin_delete(irias_objects, (FREE_FUNC) __irias_delete_object); +} + +/* + * Function iriap_open (void) + * + * Opens an instance of the IrIAP layer, and registers with IrLMP + */ +struct iriap_cb *iriap_open(__u8 slsap_sel, int mode, void *priv, + CONFIRM_CALLBACK callback) +{ + struct iriap_cb *self; + + self = kzalloc(sizeof(*self), GFP_ATOMIC); + if (!self) + return NULL; + + /* + * Initialize instance + */ + + self->magic = IAS_MAGIC; + self->mode = mode; + if (mode == IAS_CLIENT) + iriap_register_lsap(self, slsap_sel, mode); + + self->confirm = callback; + self->priv = priv; + + /* iriap_getvaluebyclass_request() will construct packets before + * we connect, so this must have a sane value... Jean II */ + self->max_header_size = LMP_MAX_HEADER; + + init_timer(&self->watchdog_timer); + + hashbin_insert(iriap, (irda_queue_t *) self, (long) self, NULL); + + /* Initialize state machines */ + iriap_next_client_state(self, S_DISCONNECT); + iriap_next_call_state(self, S_MAKE_CALL); + iriap_next_server_state(self, R_DISCONNECT); + iriap_next_r_connect_state(self, R_WAITING); + + return self; +} +EXPORT_SYMBOL(iriap_open); + +/* + * Function __iriap_close (self) + * + * Removes (deallocates) the IrIAP instance + * + */ +static void __iriap_close(struct iriap_cb *self) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + + del_timer(&self->watchdog_timer); + + if (self->request_skb) + dev_kfree_skb(self->request_skb); + + self->magic = 0; + + kfree(self); +} + +/* + * Function iriap_close (void) + * + * Closes IrIAP and deregisters with IrLMP + */ +void iriap_close(struct iriap_cb *self) +{ + struct iriap_cb *entry; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + + if (self->lsap) { + irlmp_close_lsap(self->lsap); + self->lsap = NULL; + } + + entry = (struct iriap_cb *) hashbin_remove(iriap, (long) self, NULL); + IRDA_ASSERT(entry == self, return;); + + __iriap_close(self); +} +EXPORT_SYMBOL(iriap_close); + +static int iriap_register_lsap(struct iriap_cb *self, __u8 slsap_sel, int mode) +{ + notify_t notify; + + irda_notify_init(¬ify); + notify.connect_confirm = iriap_connect_confirm; + notify.connect_indication = iriap_connect_indication; + notify.disconnect_indication = iriap_disconnect_indication; + notify.data_indication = iriap_data_indication; + notify.instance = self; + if (mode == IAS_CLIENT) + strcpy(notify.name, "IrIAS cli"); + else + strcpy(notify.name, "IrIAS srv"); + + self->lsap = irlmp_open_lsap(slsap_sel, ¬ify, 0); + if (self->lsap == NULL) { + net_err_ratelimited("%s: Unable to allocated LSAP!\n", + __func__); + return -1; + } + self->slsap_sel = self->lsap->slsap_sel; + + return 0; +} + +/* + * Function iriap_disconnect_indication (handle, reason) + * + * Got disconnect, so clean up everything associated with this connection + * + */ +static void iriap_disconnect_indication(void *instance, void *sap, + LM_REASON reason, + struct sk_buff *skb) +{ + struct iriap_cb *self; + + pr_debug("%s(), reason=%s [%d]\n", __func__, + irlmp_reason_str(reason), reason); + + self = instance; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + + IRDA_ASSERT(iriap != NULL, return;); + + del_timer(&self->watchdog_timer); + + /* Not needed */ + if (skb) + dev_kfree_skb(skb); + + if (self->mode == IAS_CLIENT) { + pr_debug("%s(), disconnect as client\n", __func__); + + + iriap_do_client_event(self, IAP_LM_DISCONNECT_INDICATION, + NULL); + /* + * Inform service user that the request failed by sending + * it a NULL value. Warning, the client might close us, so + * remember no to use self anymore after calling confirm + */ + if (self->confirm) + self->confirm(IAS_DISCONNECT, 0, NULL, self->priv); + } else { + pr_debug("%s(), disconnect as server\n", __func__); + iriap_do_server_event(self, IAP_LM_DISCONNECT_INDICATION, + NULL); + iriap_close(self); + } +} + +/* + * Function iriap_disconnect_request (handle) + */ +static void iriap_disconnect_request(struct iriap_cb *self) +{ + struct sk_buff *tx_skb; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + + tx_skb = alloc_skb(LMP_MAX_HEADER, GFP_ATOMIC); + if (tx_skb == NULL) { + pr_debug("%s(), Could not allocate an sk_buff of length %d\n", + __func__, LMP_MAX_HEADER); + return; + } + + /* + * Reserve space for MUX control and LAP header + */ + skb_reserve(tx_skb, LMP_MAX_HEADER); + + irlmp_disconnect_request(self->lsap, tx_skb); +} + +/* + * Function iriap_getvaluebyclass (addr, name, attr) + * + * Retrieve all values from attribute in all objects with given class + * name + */ +int iriap_getvaluebyclass_request(struct iriap_cb *self, + __u32 saddr, __u32 daddr, + char *name, char *attr) +{ + struct sk_buff *tx_skb; + int name_len, attr_len, skb_len; + __u8 *frame; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return -1;); + + /* Client must supply the destination device address */ + if (!daddr) + return -1; + + self->daddr = daddr; + self->saddr = saddr; + + /* + * Save operation, so we know what the later indication is about + */ + self->operation = GET_VALUE_BY_CLASS; + + /* Give ourselves 10 secs to finish this operation */ + iriap_start_watchdog_timer(self, 10*HZ); + + name_len = strlen(name); /* Up to IAS_MAX_CLASSNAME = 60 */ + attr_len = strlen(attr); /* Up to IAS_MAX_ATTRIBNAME = 60 */ + + skb_len = self->max_header_size+2+name_len+1+attr_len+4; + tx_skb = alloc_skb(skb_len, GFP_ATOMIC); + if (!tx_skb) + return -ENOMEM; + + /* Reserve space for MUX and LAP header */ + skb_reserve(tx_skb, self->max_header_size); + skb_put(tx_skb, 3+name_len+attr_len); + frame = tx_skb->data; + + /* Build frame */ + frame[0] = IAP_LST | GET_VALUE_BY_CLASS; + frame[1] = name_len; /* Insert length of name */ + memcpy(frame+2, name, name_len); /* Insert name */ + frame[2+name_len] = attr_len; /* Insert length of attr */ + memcpy(frame+3+name_len, attr, attr_len); /* Insert attr */ + + iriap_do_client_event(self, IAP_CALL_REQUEST_GVBC, tx_skb); + + /* Drop reference count - see state_s_disconnect(). */ + dev_kfree_skb(tx_skb); + + return 0; +} +EXPORT_SYMBOL(iriap_getvaluebyclass_request); + +/* + * Function iriap_getvaluebyclass_confirm (self, skb) + * + * Got result from GetValueByClass command. Parse it and return result + * to service user. + * + */ +static void iriap_getvaluebyclass_confirm(struct iriap_cb *self, + struct sk_buff *skb) +{ + struct ias_value *value; + int charset; + __u32 value_len; + __u32 tmp_cpu32; + __u16 obj_id; + __u16 len; + __u8 type; + __u8 *fp; + int n; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + IRDA_ASSERT(skb != NULL, return;); + + /* Initialize variables */ + fp = skb->data; + n = 2; + + /* Get length, MSB first */ + len = get_unaligned_be16(fp + n); + n += 2; + + pr_debug("%s(), len=%d\n", __func__, len); + + /* Get object ID, MSB first */ + obj_id = get_unaligned_be16(fp + n); + n += 2; + + type = fp[n++]; + pr_debug("%s(), Value type = %d\n", __func__, type); + + switch (type) { + case IAS_INTEGER: + memcpy(&tmp_cpu32, fp+n, 4); n += 4; + be32_to_cpus(&tmp_cpu32); + value = irias_new_integer_value(tmp_cpu32); + + /* Legal values restricted to 0x01-0x6f, page 15 irttp */ + pr_debug("%s(), lsap=%d\n", __func__, value->t.integer); + break; + case IAS_STRING: + charset = fp[n++]; + + switch (charset) { + case CS_ASCII: + break; +/* case CS_ISO_8859_1: */ +/* case CS_ISO_8859_2: */ +/* case CS_ISO_8859_3: */ +/* case CS_ISO_8859_4: */ +/* case CS_ISO_8859_5: */ +/* case CS_ISO_8859_6: */ +/* case CS_ISO_8859_7: */ +/* case CS_ISO_8859_8: */ +/* case CS_ISO_8859_9: */ +/* case CS_UNICODE: */ + default: + pr_debug("%s(), charset [%d] %s, not supported\n", + __func__, charset, + charset < ARRAY_SIZE(ias_charset_types) ? + ias_charset_types[charset] : + "(unknown)"); + + /* Aborting, close connection! */ + iriap_disconnect_request(self); + return; + /* break; */ + } + value_len = fp[n++]; + pr_debug("%s(), strlen=%d\n", __func__, value_len); + + /* Make sure the string is null-terminated */ + if (n + value_len < skb->len) + fp[n + value_len] = 0x00; + pr_debug("Got string %s\n", fp+n); + + /* Will truncate to IAS_MAX_STRING bytes */ + value = irias_new_string_value(fp+n); + break; + case IAS_OCT_SEQ: + value_len = get_unaligned_be16(fp + n); + n += 2; + + /* Will truncate to IAS_MAX_OCTET_STRING bytes */ + value = irias_new_octseq_value(fp+n, value_len); + break; + default: + value = irias_new_missing_value(); + break; + } + + /* Finished, close connection! */ + iriap_disconnect_request(self); + + /* Warning, the client might close us, so remember no to use self + * anymore after calling confirm + */ + if (self->confirm) + self->confirm(IAS_SUCCESS, obj_id, value, self->priv); + else { + pr_debug("%s(), missing handler!\n", __func__); + irias_delete_value(value); + } +} + +/* + * Function iriap_getvaluebyclass_response () + * + * Send answer back to remote LM-IAS + * + */ +static void iriap_getvaluebyclass_response(struct iriap_cb *self, + __u16 obj_id, + __u8 ret_code, + struct ias_value *value) +{ + struct sk_buff *tx_skb; + int n; + __be32 tmp_be32; + __be16 tmp_be16; + __u8 *fp; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + IRDA_ASSERT(value != NULL, return;); + IRDA_ASSERT(value->len <= 1024, return;); + + /* Initialize variables */ + n = 0; + + /* + * We must adjust the size of the response after the length of the + * value. We add 32 bytes because of the 6 bytes for the frame and + * max 5 bytes for the value coding. + */ + tx_skb = alloc_skb(value->len + self->max_header_size + 32, + GFP_ATOMIC); + if (!tx_skb) + return; + + /* Reserve space for MUX and LAP header */ + skb_reserve(tx_skb, self->max_header_size); + skb_put(tx_skb, 6); + + fp = tx_skb->data; + + /* Build frame */ + fp[n++] = GET_VALUE_BY_CLASS | IAP_LST; + fp[n++] = ret_code; + + /* Insert list length (MSB first) */ + tmp_be16 = htons(0x0001); + memcpy(fp+n, &tmp_be16, 2); n += 2; + + /* Insert object identifier ( MSB first) */ + tmp_be16 = cpu_to_be16(obj_id); + memcpy(fp+n, &tmp_be16, 2); n += 2; + + switch (value->type) { + case IAS_STRING: + skb_put(tx_skb, 3 + value->len); + fp[n++] = value->type; + fp[n++] = 0; /* ASCII */ + fp[n++] = (__u8) value->len; + memcpy(fp+n, value->t.string, value->len); n+=value->len; + break; + case IAS_INTEGER: + skb_put(tx_skb, 5); + fp[n++] = value->type; + + tmp_be32 = cpu_to_be32(value->t.integer); + memcpy(fp+n, &tmp_be32, 4); n += 4; + break; + case IAS_OCT_SEQ: + skb_put(tx_skb, 3 + value->len); + fp[n++] = value->type; + + tmp_be16 = cpu_to_be16(value->len); + memcpy(fp+n, &tmp_be16, 2); n += 2; + memcpy(fp+n, value->t.oct_seq, value->len); n+=value->len; + break; + case IAS_MISSING: + pr_debug("%s: sending IAS_MISSING\n", __func__); + skb_put(tx_skb, 1); + fp[n++] = value->type; + break; + default: + pr_debug("%s(), type not implemented!\n", __func__); + break; + } + iriap_do_r_connect_event(self, IAP_CALL_RESPONSE, tx_skb); + + /* Drop reference count - see state_r_execute(). */ + dev_kfree_skb(tx_skb); +} + +/* + * Function iriap_getvaluebyclass_indication (self, skb) + * + * getvaluebyclass is requested from peer LM-IAS + * + */ +static void iriap_getvaluebyclass_indication(struct iriap_cb *self, + struct sk_buff *skb) +{ + struct ias_object *obj; + struct ias_attrib *attrib; + int name_len; + int attr_len; + char name[IAS_MAX_CLASSNAME + 1]; /* 60 bytes */ + char attr[IAS_MAX_ATTRIBNAME + 1]; /* 60 bytes */ + __u8 *fp; + int n; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + IRDA_ASSERT(skb != NULL, return;); + + fp = skb->data; + n = 1; + + name_len = fp[n++]; + + IRDA_ASSERT(name_len < IAS_MAX_CLASSNAME + 1, return;); + + memcpy(name, fp+n, name_len); n+=name_len; + name[name_len] = '\0'; + + attr_len = fp[n++]; + + IRDA_ASSERT(attr_len < IAS_MAX_ATTRIBNAME + 1, return;); + + memcpy(attr, fp+n, attr_len); n+=attr_len; + attr[attr_len] = '\0'; + + pr_debug("LM-IAS: Looking up %s: %s\n", name, attr); + obj = irias_find_object(name); + + if (obj == NULL) { + pr_debug("LM-IAS: Object %s not found\n", name); + iriap_getvaluebyclass_response(self, 0x1235, IAS_CLASS_UNKNOWN, + &irias_missing); + return; + } + pr_debug("LM-IAS: found %s, id=%d\n", obj->name, obj->id); + + attrib = irias_find_attrib(obj, attr); + if (attrib == NULL) { + pr_debug("LM-IAS: Attribute %s not found\n", attr); + iriap_getvaluebyclass_response(self, obj->id, + IAS_ATTRIB_UNKNOWN, + &irias_missing); + return; + } + + /* We have a match; send the value. */ + iriap_getvaluebyclass_response(self, obj->id, IAS_SUCCESS, + attrib->value); +} + +/* + * Function iriap_send_ack (void) + * + * Currently not used + * + */ +void iriap_send_ack(struct iriap_cb *self) +{ + struct sk_buff *tx_skb; + __u8 *frame; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + + tx_skb = alloc_skb(LMP_MAX_HEADER + 1, GFP_ATOMIC); + if (!tx_skb) + return; + + /* Reserve space for MUX and LAP header */ + skb_reserve(tx_skb, self->max_header_size); + skb_put(tx_skb, 1); + frame = tx_skb->data; + + /* Build frame */ + frame[0] = IAP_LST | IAP_ACK | self->operation; + + irlmp_data_request(self->lsap, tx_skb); +} + +void iriap_connect_request(struct iriap_cb *self) +{ + int ret; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + + ret = irlmp_connect_request(self->lsap, LSAP_IAS, + self->saddr, self->daddr, + NULL, NULL); + if (ret < 0) { + pr_debug("%s(), connect failed!\n", __func__); + self->confirm(IAS_DISCONNECT, 0, NULL, self->priv); + } +} + +/* + * Function iriap_connect_confirm (handle, skb) + * + * LSAP connection confirmed! + * + */ +static void iriap_connect_confirm(void *instance, void *sap, + struct qos_info *qos, __u32 max_seg_size, + __u8 max_header_size, + struct sk_buff *skb) +{ + struct iriap_cb *self; + + self = instance; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + IRDA_ASSERT(skb != NULL, return;); + + self->max_data_size = max_seg_size; + self->max_header_size = max_header_size; + + del_timer(&self->watchdog_timer); + + iriap_do_client_event(self, IAP_LM_CONNECT_CONFIRM, skb); + + /* Drop reference count - see state_s_make_call(). */ + dev_kfree_skb(skb); +} + +/* + * Function iriap_connect_indication ( handle, skb) + * + * Remote LM-IAS is requesting connection + * + */ +static void iriap_connect_indication(void *instance, void *sap, + struct qos_info *qos, __u32 max_seg_size, + __u8 max_header_size, + struct sk_buff *skb) +{ + struct iriap_cb *self, *new; + + self = instance; + + IRDA_ASSERT(skb != NULL, return;); + IRDA_ASSERT(self != NULL, goto out;); + IRDA_ASSERT(self->magic == IAS_MAGIC, goto out;); + + /* Start new server */ + new = iriap_open(LSAP_IAS, IAS_SERVER, NULL, NULL); + if (!new) { + pr_debug("%s(), open failed\n", __func__); + goto out; + } + + /* Now attach up the new "socket" */ + new->lsap = irlmp_dup(self->lsap, new); + if (!new->lsap) { + pr_debug("%s(), dup failed!\n", __func__); + goto out; + } + + new->max_data_size = max_seg_size; + new->max_header_size = max_header_size; + + /* Clean up the original one to keep it in listen state */ + irlmp_listen(self->lsap); + + iriap_do_server_event(new, IAP_LM_CONNECT_INDICATION, skb); + +out: + /* Drop reference count - see state_r_disconnect(). */ + dev_kfree_skb(skb); +} + +/* + * Function iriap_data_indication (handle, skb) + * + * Receives data from connection identified by handle from IrLMP + * + */ +static int iriap_data_indication(void *instance, void *sap, + struct sk_buff *skb) +{ + struct iriap_cb *self; + __u8 *frame; + __u8 opcode; + + self = instance; + + IRDA_ASSERT(skb != NULL, return 0;); + IRDA_ASSERT(self != NULL, goto out;); + IRDA_ASSERT(self->magic == IAS_MAGIC, goto out;); + + frame = skb->data; + + if (self->mode == IAS_SERVER) { + /* Call server */ + pr_debug("%s(), Calling server!\n", __func__); + iriap_do_r_connect_event(self, IAP_RECV_F_LST, skb); + goto out; + } + opcode = frame[0]; + if (~opcode & IAP_LST) { + net_warn_ratelimited("%s:, IrIAS multiframe commands or results is not implemented yet!\n", + __func__); + goto out; + } + + /* Check for ack frames since they don't contain any data */ + if (opcode & IAP_ACK) { + pr_debug("%s() Got ack frame!\n", __func__); + goto out; + } + + opcode &= ~IAP_LST; /* Mask away LST bit */ + + switch (opcode) { + case GET_INFO_BASE: + pr_debug("IrLMP GetInfoBaseDetails not implemented!\n"); + break; + case GET_VALUE_BY_CLASS: + iriap_do_call_event(self, IAP_RECV_F_LST, NULL); + + switch (frame[1]) { + case IAS_SUCCESS: + iriap_getvaluebyclass_confirm(self, skb); + break; + case IAS_CLASS_UNKNOWN: + pr_debug("%s(), No such class!\n", __func__); + /* Finished, close connection! */ + iriap_disconnect_request(self); + + /* + * Warning, the client might close us, so remember + * no to use self anymore after calling confirm + */ + if (self->confirm) + self->confirm(IAS_CLASS_UNKNOWN, 0, NULL, + self->priv); + break; + case IAS_ATTRIB_UNKNOWN: + pr_debug("%s(), No such attribute!\n", __func__); + /* Finished, close connection! */ + iriap_disconnect_request(self); + + /* + * Warning, the client might close us, so remember + * no to use self anymore after calling confirm + */ + if (self->confirm) + self->confirm(IAS_ATTRIB_UNKNOWN, 0, NULL, + self->priv); + break; + } + break; + default: + pr_debug("%s(), Unknown op-code: %02x\n", __func__, + opcode); + break; + } + +out: + /* Cleanup - sub-calls will have done skb_get() as needed. */ + dev_kfree_skb(skb); + return 0; +} + +/* + * Function iriap_call_indication (self, skb) + * + * Received call to server from peer LM-IAS + * + */ +void iriap_call_indication(struct iriap_cb *self, struct sk_buff *skb) +{ + __u8 *fp; + __u8 opcode; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + IRDA_ASSERT(skb != NULL, return;); + + fp = skb->data; + + opcode = fp[0]; + if (~opcode & 0x80) { + net_warn_ratelimited("%s: IrIAS multiframe commands or results is not implemented yet!\n", + __func__); + return; + } + opcode &= 0x7f; /* Mask away LST bit */ + + switch (opcode) { + case GET_INFO_BASE: + net_warn_ratelimited("%s: GetInfoBaseDetails not implemented yet!\n", + __func__); + break; + case GET_VALUE_BY_CLASS: + iriap_getvaluebyclass_indication(self, skb); + break; + } + /* skb will be cleaned up in iriap_data_indication */ +} + +/* + * Function iriap_watchdog_timer_expired (data) + * + * Query has taken too long time, so abort + * + */ +static void iriap_watchdog_timer_expired(void *data) +{ + struct iriap_cb *self = (struct iriap_cb *) data; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + + /* iriap_close(self); */ +} + +#ifdef CONFIG_PROC_FS + +static const char *const ias_value_types[] = { + "IAS_MISSING", + "IAS_INTEGER", + "IAS_OCT_SEQ", + "IAS_STRING" +}; + +static inline struct ias_object *irias_seq_idx(loff_t pos) +{ + struct ias_object *obj; + + for (obj = (struct ias_object *) hashbin_get_first(irias_objects); + obj; obj = (struct ias_object *) hashbin_get_next(irias_objects)) { + if (pos-- == 0) + break; + } + + return obj; +} + +static void *irias_seq_start(struct seq_file *seq, loff_t *pos) +{ + spin_lock_irq(&irias_objects->hb_spinlock); + + return *pos ? irias_seq_idx(*pos - 1) : SEQ_START_TOKEN; +} + +static void *irias_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + ++*pos; + + return (v == SEQ_START_TOKEN) + ? (void *) hashbin_get_first(irias_objects) + : (void *) hashbin_get_next(irias_objects); +} + +static void irias_seq_stop(struct seq_file *seq, void *v) +{ + spin_unlock_irq(&irias_objects->hb_spinlock); +} + +static int irias_seq_show(struct seq_file *seq, void *v) +{ + if (v == SEQ_START_TOKEN) + seq_puts(seq, "LM-IAS Objects:\n"); + else { + struct ias_object *obj = v; + struct ias_attrib *attrib; + + IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return -EINVAL;); + + seq_printf(seq, "name: %s, id=%d\n", + obj->name, obj->id); + + /* Careful for priority inversions here ! + * All other uses of attrib spinlock are independent of + * the object spinlock, so we are safe. Jean II */ + spin_lock(&obj->attribs->hb_spinlock); + + /* List all attributes for this object */ + for (attrib = (struct ias_attrib *) hashbin_get_first(obj->attribs); + attrib != NULL; + attrib = (struct ias_attrib *) hashbin_get_next(obj->attribs)) { + + IRDA_ASSERT(attrib->magic == IAS_ATTRIB_MAGIC, + goto outloop; ); + + seq_printf(seq, " - Attribute name: \"%s\", ", + attrib->name); + seq_printf(seq, "value[%s]: ", + ias_value_types[attrib->value->type]); + + switch (attrib->value->type) { + case IAS_INTEGER: + seq_printf(seq, "%d\n", + attrib->value->t.integer); + break; + case IAS_STRING: + seq_printf(seq, "\"%s\"\n", + attrib->value->t.string); + break; + case IAS_OCT_SEQ: + seq_printf(seq, "octet sequence (%d bytes)\n", + attrib->value->len); + break; + case IAS_MISSING: + seq_puts(seq, "missing\n"); + break; + default: + seq_printf(seq, "type %d?\n", + attrib->value->type); + } + seq_putc(seq, '\n'); + + } + IRDA_ASSERT_LABEL(outloop:) + spin_unlock(&obj->attribs->hb_spinlock); + } + + return 0; +} + +static const struct seq_operations irias_seq_ops = { + .start = irias_seq_start, + .next = irias_seq_next, + .stop = irias_seq_stop, + .show = irias_seq_show, +}; + +static int irias_seq_open(struct inode *inode, struct file *file) +{ + IRDA_ASSERT( irias_objects != NULL, return -EINVAL;); + + return seq_open(file, &irias_seq_ops); +} + +const struct file_operations irias_seq_fops = { + .owner = THIS_MODULE, + .open = irias_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +#endif /* PROC_FS */ diff --git a/kernel/net/irda/iriap_event.c b/kernel/net/irda/iriap_event.c new file mode 100644 index 000000000..e6098b2e0 --- /dev/null +++ b/kernel/net/irda/iriap_event.c @@ -0,0 +1,496 @@ +/********************************************************************* + * + * Filename: iriap_event.c + * Version: 0.1 + * Description: IAP Finite State Machine + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Thu Aug 21 00:02:07 1997 + * Modified at: Wed Mar 1 11:28:34 2000 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1997, 1999-2000 Dag Brattli <dagb@cs.uit.no>, + * All Rights Reserved. + * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/slab.h> + +#include <net/irda/irda.h> +#include <net/irda/irlmp.h> +#include <net/irda/iriap.h> +#include <net/irda/iriap_event.h> + +static void state_s_disconnect (struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb); +static void state_s_connecting (struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb); +static void state_s_call (struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb); + +static void state_s_make_call (struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb); +static void state_s_calling (struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb); +static void state_s_outstanding (struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb); +static void state_s_replying (struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb); +static void state_s_wait_for_call(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb); +static void state_s_wait_active (struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb); + +static void state_r_disconnect (struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb); +static void state_r_call (struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb); +static void state_r_waiting (struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb); +static void state_r_wait_active (struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb); +static void state_r_receiving (struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb); +static void state_r_execute (struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb); +static void state_r_returning (struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb); + +static void (*iriap_state[])(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) = { + /* Client FSM */ + state_s_disconnect, + state_s_connecting, + state_s_call, + + /* S-Call FSM */ + state_s_make_call, + state_s_calling, + state_s_outstanding, + state_s_replying, + state_s_wait_for_call, + state_s_wait_active, + + /* Server FSM */ + state_r_disconnect, + state_r_call, + + /* R-Connect FSM */ + state_r_waiting, + state_r_wait_active, + state_r_receiving, + state_r_execute, + state_r_returning, +}; + +void iriap_next_client_state(struct iriap_cb *self, IRIAP_STATE state) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + + self->client_state = state; +} + +void iriap_next_call_state(struct iriap_cb *self, IRIAP_STATE state) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + + self->call_state = state; +} + +void iriap_next_server_state(struct iriap_cb *self, IRIAP_STATE state) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + + self->server_state = state; +} + +void iriap_next_r_connect_state(struct iriap_cb *self, IRIAP_STATE state) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + + self->r_connect_state = state; +} + +void iriap_do_client_event(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + + (*iriap_state[ self->client_state]) (self, event, skb); +} + +void iriap_do_call_event(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + + (*iriap_state[ self->call_state]) (self, event, skb); +} + +void iriap_do_server_event(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + + (*iriap_state[ self->server_state]) (self, event, skb); +} + +void iriap_do_r_connect_event(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + + (*iriap_state[ self->r_connect_state]) (self, event, skb); +} + + +/* + * Function state_s_disconnect (event, skb) + * + * S-Disconnect, The device has no LSAP connection to a particular + * remote device. + */ +static void state_s_disconnect(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + + switch (event) { + case IAP_CALL_REQUEST_GVBC: + iriap_next_client_state(self, S_CONNECTING); + IRDA_ASSERT(self->request_skb == NULL, return;); + /* Don't forget to refcount it - + * see iriap_getvaluebyclass_request(). */ + skb_get(skb); + self->request_skb = skb; + iriap_connect_request(self); + break; + case IAP_LM_DISCONNECT_INDICATION: + break; + default: + pr_debug("%s(), Unknown event %d\n", __func__, event); + break; + } +} + +/* + * Function state_s_connecting (self, event, skb) + * + * S-Connecting + * + */ +static void state_s_connecting(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + + switch (event) { + case IAP_LM_CONNECT_CONFIRM: + /* + * Jump to S-Call FSM + */ + iriap_do_call_event(self, IAP_CALL_REQUEST, skb); + /* iriap_call_request(self, 0,0,0); */ + iriap_next_client_state(self, S_CALL); + break; + case IAP_LM_DISCONNECT_INDICATION: + /* Abort calls */ + iriap_next_call_state(self, S_MAKE_CALL); + iriap_next_client_state(self, S_DISCONNECT); + break; + default: + pr_debug("%s(), Unknown event %d\n", __func__, event); + break; + } +} + +/* + * Function state_s_call (self, event, skb) + * + * S-Call, The device can process calls to a specific remote + * device. Whenever the LSAP connection is disconnected, this state + * catches that event and clears up + */ +static void state_s_call(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return;); + + switch (event) { + case IAP_LM_DISCONNECT_INDICATION: + /* Abort calls */ + iriap_next_call_state(self, S_MAKE_CALL); + iriap_next_client_state(self, S_DISCONNECT); + break; + default: + pr_debug("state_s_call: Unknown event %d\n", event); + break; + } +} + +/* + * Function state_s_make_call (event, skb) + * + * S-Make-Call + * + */ +static void state_s_make_call(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) +{ + struct sk_buff *tx_skb; + + IRDA_ASSERT(self != NULL, return;); + + switch (event) { + case IAP_CALL_REQUEST: + /* Already refcounted - see state_s_disconnect() */ + tx_skb = self->request_skb; + self->request_skb = NULL; + + irlmp_data_request(self->lsap, tx_skb); + iriap_next_call_state(self, S_OUTSTANDING); + break; + default: + pr_debug("%s(), Unknown event %d\n", __func__, event); + break; + } +} + +/* + * Function state_s_calling (event, skb) + * + * S-Calling + * + */ +static void state_s_calling(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) +{ + pr_debug("%s(), Not implemented\n", __func__); +} + +/* + * Function state_s_outstanding (event, skb) + * + * S-Outstanding, The device is waiting for a response to a command + * + */ +static void state_s_outstanding(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return;); + + switch (event) { + case IAP_RECV_F_LST: + /*iriap_send_ack(self);*/ + /*LM_Idle_request(idle); */ + + iriap_next_call_state(self, S_WAIT_FOR_CALL); + break; + default: + pr_debug("%s(), Unknown event %d\n", __func__, event); + break; + } +} + +/* + * Function state_s_replying (event, skb) + * + * S-Replying, The device is collecting a multiple part response + */ +static void state_s_replying(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) +{ + pr_debug("%s(), Not implemented\n", __func__); +} + +/* + * Function state_s_wait_for_call (event, skb) + * + * S-Wait-for-Call + * + */ +static void state_s_wait_for_call(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) +{ + pr_debug("%s(), Not implemented\n", __func__); +} + + +/* + * Function state_s_wait_active (event, skb) + * + * S-Wait-Active + * + */ +static void state_s_wait_active(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) +{ + pr_debug("%s(), Not implemented\n", __func__); +} + +/************************************************************************** + * + * Server FSM + * + **************************************************************************/ + +/* + * Function state_r_disconnect (self, event, skb) + * + * LM-IAS server is disconnected (not processing any requests!) + * + */ +static void state_r_disconnect(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) +{ + struct sk_buff *tx_skb; + + switch (event) { + case IAP_LM_CONNECT_INDICATION: + tx_skb = alloc_skb(LMP_MAX_HEADER, GFP_ATOMIC); + if (tx_skb == NULL) + return; + + /* Reserve space for MUX_CONTROL and LAP header */ + skb_reserve(tx_skb, LMP_MAX_HEADER); + + irlmp_connect_response(self->lsap, tx_skb); + /*LM_Idle_request(idle); */ + + iriap_next_server_state(self, R_CALL); + + /* + * Jump to R-Connect FSM, we skip R-Waiting since we do not + * care about LM_Idle_request()! + */ + iriap_next_r_connect_state(self, R_RECEIVING); + break; + default: + pr_debug("%s(), unknown event %d\n", __func__, event); + break; + } +} + +/* + * Function state_r_call (self, event, skb) + */ +static void state_r_call(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) +{ + switch (event) { + case IAP_LM_DISCONNECT_INDICATION: + /* Abort call */ + iriap_next_server_state(self, R_DISCONNECT); + iriap_next_r_connect_state(self, R_WAITING); + break; + default: + pr_debug("%s(), unknown event!\n", __func__); + break; + } +} + +/* + * R-Connect FSM + */ + +/* + * Function state_r_waiting (self, event, skb) + */ +static void state_r_waiting(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) +{ + pr_debug("%s(), Not implemented\n", __func__); +} + +static void state_r_wait_active(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) +{ + pr_debug("%s(), Not implemented\n", __func__); +} + +/* + * Function state_r_receiving (self, event, skb) + * + * We are receiving a command + * + */ +static void state_r_receiving(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) +{ + switch (event) { + case IAP_RECV_F_LST: + iriap_next_r_connect_state(self, R_EXECUTE); + + iriap_call_indication(self, skb); + break; + default: + pr_debug("%s(), unknown event!\n", __func__); + break; + } +} + +/* + * Function state_r_execute (self, event, skb) + * + * The server is processing the request + * + */ +static void state_r_execute(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(skb != NULL, return;); + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IAS_MAGIC, return;); + + switch (event) { + case IAP_CALL_RESPONSE: + /* + * Since we don't implement the Waiting state, we return + * to state Receiving instead, DB. + */ + iriap_next_r_connect_state(self, R_RECEIVING); + + /* Don't forget to refcount it - see + * iriap_getvaluebyclass_response(). */ + skb_get(skb); + + irlmp_data_request(self->lsap, skb); + break; + default: + pr_debug("%s(), unknown event!\n", __func__); + break; + } +} + +static void state_r_returning(struct iriap_cb *self, IRIAP_EVENT event, + struct sk_buff *skb) +{ + pr_debug("%s(), event=%d\n", __func__, event); + + switch (event) { + case IAP_RECV_F_LST: + break; + default: + break; + } +} diff --git a/kernel/net/irda/irias_object.c b/kernel/net/irda/irias_object.c new file mode 100644 index 000000000..53b86d0e1 --- /dev/null +++ b/kernel/net/irda/irias_object.c @@ -0,0 +1,555 @@ +/********************************************************************* + * + * Filename: irias_object.c + * Version: 0.3 + * Description: IAS object database and functions + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Thu Oct 1 22:50:04 1998 + * Modified at: Wed Dec 15 11:23:16 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/socket.h> +#include <linux/module.h> + +#include <net/irda/irda.h> +#include <net/irda/irias_object.h> + +hashbin_t *irias_objects; + +/* + * Used when a missing value needs to be returned + */ +struct ias_value irias_missing = { IAS_MISSING, 0, 0, 0, {0}}; + + +/* + * Function ias_new_object (name, id) + * + * Create a new IAS object + * + */ +struct ias_object *irias_new_object( char *name, int id) +{ + struct ias_object *obj; + + obj = kzalloc(sizeof(struct ias_object), GFP_ATOMIC); + if (obj == NULL) { + net_warn_ratelimited("%s(), Unable to allocate object!\n", + __func__); + return NULL; + } + + obj->magic = IAS_OBJECT_MAGIC; + obj->name = kstrndup(name, IAS_MAX_CLASSNAME, GFP_ATOMIC); + if (!obj->name) { + net_warn_ratelimited("%s(), Unable to allocate name!\n", + __func__); + kfree(obj); + return NULL; + } + obj->id = id; + + /* Locking notes : the attrib spinlock has lower precendence + * than the objects spinlock. Never grap the objects spinlock + * while holding any attrib spinlock (risk of deadlock). Jean II */ + obj->attribs = hashbin_new(HB_LOCK); + + if (obj->attribs == NULL) { + net_warn_ratelimited("%s(), Unable to allocate attribs!\n", + __func__); + kfree(obj->name); + kfree(obj); + return NULL; + } + + return obj; +} +EXPORT_SYMBOL(irias_new_object); + +/* + * Function irias_delete_attrib (attrib) + * + * Delete given attribute and deallocate all its memory + * + */ +static void __irias_delete_attrib(struct ias_attrib *attrib) +{ + IRDA_ASSERT(attrib != NULL, return;); + IRDA_ASSERT(attrib->magic == IAS_ATTRIB_MAGIC, return;); + + kfree(attrib->name); + + irias_delete_value(attrib->value); + attrib->magic = ~IAS_ATTRIB_MAGIC; + + kfree(attrib); +} + +void __irias_delete_object(struct ias_object *obj) +{ + IRDA_ASSERT(obj != NULL, return;); + IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;); + + kfree(obj->name); + + hashbin_delete(obj->attribs, (FREE_FUNC) __irias_delete_attrib); + + obj->magic = ~IAS_OBJECT_MAGIC; + + kfree(obj); +} + +/* + * Function irias_delete_object (obj) + * + * Remove object from hashbin and deallocate all attributes associated with + * with this object and the object itself + * + */ +int irias_delete_object(struct ias_object *obj) +{ + struct ias_object *node; + + IRDA_ASSERT(obj != NULL, return -1;); + IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return -1;); + + /* Remove from list */ + node = hashbin_remove_this(irias_objects, (irda_queue_t *) obj); + if (!node) + pr_debug("%s(), object already removed!\n", + __func__); + + /* Destroy */ + __irias_delete_object(obj); + + return 0; +} +EXPORT_SYMBOL(irias_delete_object); + +/* + * Function irias_delete_attrib (obj) + * + * Remove attribute from hashbin and, if it was the last attribute of + * the object, remove the object as well. + * + */ +int irias_delete_attrib(struct ias_object *obj, struct ias_attrib *attrib, + int cleanobject) +{ + struct ias_attrib *node; + + IRDA_ASSERT(obj != NULL, return -1;); + IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return -1;); + IRDA_ASSERT(attrib != NULL, return -1;); + + /* Remove attribute from object */ + node = hashbin_remove_this(obj->attribs, (irda_queue_t *) attrib); + if (!node) + return 0; /* Already removed or non-existent */ + + /* Deallocate attribute */ + __irias_delete_attrib(node); + + /* Check if object has still some attributes, destroy it if none. + * At first glance, this look dangerous, as the kernel reference + * various IAS objects. However, we only use this function on + * user attributes, not kernel attributes, so there is no risk + * of deleting a kernel object this way. Jean II */ + node = (struct ias_attrib *) hashbin_get_first(obj->attribs); + if (cleanobject && !node) + irias_delete_object(obj); + + return 0; +} + +/* + * Function irias_insert_object (obj) + * + * Insert an object into the LM-IAS database + * + */ +void irias_insert_object(struct ias_object *obj) +{ + IRDA_ASSERT(obj != NULL, return;); + IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;); + + hashbin_insert(irias_objects, (irda_queue_t *) obj, 0, obj->name); +} +EXPORT_SYMBOL(irias_insert_object); + +/* + * Function irias_find_object (name) + * + * Find object with given name + * + */ +struct ias_object *irias_find_object(char *name) +{ + IRDA_ASSERT(name != NULL, return NULL;); + + /* Unsafe (locking), object might change */ + return hashbin_lock_find(irias_objects, 0, name); +} +EXPORT_SYMBOL(irias_find_object); + +/* + * Function irias_find_attrib (obj, name) + * + * Find named attribute in object + * + */ +struct ias_attrib *irias_find_attrib(struct ias_object *obj, char *name) +{ + struct ias_attrib *attrib; + + IRDA_ASSERT(obj != NULL, return NULL;); + IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return NULL;); + IRDA_ASSERT(name != NULL, return NULL;); + + attrib = hashbin_lock_find(obj->attribs, 0, name); + if (attrib == NULL) + return NULL; + + /* Unsafe (locking), attrib might change */ + return attrib; +} + +/* + * Function irias_add_attribute (obj, attrib) + * + * Add attribute to object + * + */ +static void irias_add_attrib(struct ias_object *obj, struct ias_attrib *attrib, + int owner) +{ + IRDA_ASSERT(obj != NULL, return;); + IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;); + + IRDA_ASSERT(attrib != NULL, return;); + IRDA_ASSERT(attrib->magic == IAS_ATTRIB_MAGIC, return;); + + /* Set if attrib is owned by kernel or user space */ + attrib->value->owner = owner; + + hashbin_insert(obj->attribs, (irda_queue_t *) attrib, 0, attrib->name); +} + +/* + * Function irias_object_change_attribute (obj_name, attrib_name, new_value) + * + * Change the value of an objects attribute. + * + */ +int irias_object_change_attribute(char *obj_name, char *attrib_name, + struct ias_value *new_value) +{ + struct ias_object *obj; + struct ias_attrib *attrib; + unsigned long flags; + + /* Find object */ + obj = hashbin_lock_find(irias_objects, 0, obj_name); + if (obj == NULL) { + net_warn_ratelimited("%s: Unable to find object: %s\n", + __func__, obj_name); + return -1; + } + + /* Slightly unsafe (obj might get removed under us) */ + spin_lock_irqsave(&obj->attribs->hb_spinlock, flags); + + /* Find attribute */ + attrib = hashbin_find(obj->attribs, 0, attrib_name); + if (attrib == NULL) { + net_warn_ratelimited("%s: Unable to find attribute: %s\n", + __func__, attrib_name); + spin_unlock_irqrestore(&obj->attribs->hb_spinlock, flags); + return -1; + } + + if ( attrib->value->type != new_value->type) { + pr_debug("%s(), changing value type not allowed!\n", + __func__); + spin_unlock_irqrestore(&obj->attribs->hb_spinlock, flags); + return -1; + } + + /* Delete old value */ + irias_delete_value(attrib->value); + + /* Insert new value */ + attrib->value = new_value; + + /* Success */ + spin_unlock_irqrestore(&obj->attribs->hb_spinlock, flags); + return 0; +} +EXPORT_SYMBOL(irias_object_change_attribute); + +/* + * Function irias_object_add_integer_attrib (obj, name, value) + * + * Add an integer attribute to an LM-IAS object + * + */ +void irias_add_integer_attrib(struct ias_object *obj, char *name, int value, + int owner) +{ + struct ias_attrib *attrib; + + IRDA_ASSERT(obj != NULL, return;); + IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;); + IRDA_ASSERT(name != NULL, return;); + + attrib = kzalloc(sizeof(struct ias_attrib), GFP_ATOMIC); + if (attrib == NULL) { + net_warn_ratelimited("%s: Unable to allocate attribute!\n", + __func__); + return; + } + + attrib->magic = IAS_ATTRIB_MAGIC; + attrib->name = kstrndup(name, IAS_MAX_ATTRIBNAME, GFP_ATOMIC); + + /* Insert value */ + attrib->value = irias_new_integer_value(value); + if (!attrib->name || !attrib->value) { + net_warn_ratelimited("%s: Unable to allocate attribute!\n", + __func__); + if (attrib->value) + irias_delete_value(attrib->value); + kfree(attrib->name); + kfree(attrib); + return; + } + + irias_add_attrib(obj, attrib, owner); +} +EXPORT_SYMBOL(irias_add_integer_attrib); + + /* + * Function irias_add_octseq_attrib (obj, name, octet_seq, len) + * + * Add a octet sequence attribute to an LM-IAS object + * + */ + +void irias_add_octseq_attrib(struct ias_object *obj, char *name, __u8 *octets, + int len, int owner) +{ + struct ias_attrib *attrib; + + IRDA_ASSERT(obj != NULL, return;); + IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;); + + IRDA_ASSERT(name != NULL, return;); + IRDA_ASSERT(octets != NULL, return;); + + attrib = kzalloc(sizeof(struct ias_attrib), GFP_ATOMIC); + if (attrib == NULL) { + net_warn_ratelimited("%s: Unable to allocate attribute!\n", + __func__); + return; + } + + attrib->magic = IAS_ATTRIB_MAGIC; + attrib->name = kstrndup(name, IAS_MAX_ATTRIBNAME, GFP_ATOMIC); + + attrib->value = irias_new_octseq_value( octets, len); + if (!attrib->name || !attrib->value) { + net_warn_ratelimited("%s: Unable to allocate attribute!\n", + __func__); + if (attrib->value) + irias_delete_value(attrib->value); + kfree(attrib->name); + kfree(attrib); + return; + } + + irias_add_attrib(obj, attrib, owner); +} +EXPORT_SYMBOL(irias_add_octseq_attrib); + +/* + * Function irias_object_add_string_attrib (obj, string) + * + * Add a string attribute to an LM-IAS object + * + */ +void irias_add_string_attrib(struct ias_object *obj, char *name, char *value, + int owner) +{ + struct ias_attrib *attrib; + + IRDA_ASSERT(obj != NULL, return;); + IRDA_ASSERT(obj->magic == IAS_OBJECT_MAGIC, return;); + + IRDA_ASSERT(name != NULL, return;); + IRDA_ASSERT(value != NULL, return;); + + attrib = kzalloc(sizeof( struct ias_attrib), GFP_ATOMIC); + if (attrib == NULL) { + net_warn_ratelimited("%s: Unable to allocate attribute!\n", + __func__); + return; + } + + attrib->magic = IAS_ATTRIB_MAGIC; + attrib->name = kstrndup(name, IAS_MAX_ATTRIBNAME, GFP_ATOMIC); + + attrib->value = irias_new_string_value(value); + if (!attrib->name || !attrib->value) { + net_warn_ratelimited("%s: Unable to allocate attribute!\n", + __func__); + if (attrib->value) + irias_delete_value(attrib->value); + kfree(attrib->name); + kfree(attrib); + return; + } + + irias_add_attrib(obj, attrib, owner); +} +EXPORT_SYMBOL(irias_add_string_attrib); + +/* + * Function irias_new_integer_value (integer) + * + * Create new IAS integer value + * + */ +struct ias_value *irias_new_integer_value(int integer) +{ + struct ias_value *value; + + value = kzalloc(sizeof(struct ias_value), GFP_ATOMIC); + if (value == NULL) + return NULL; + + value->type = IAS_INTEGER; + value->len = 4; + value->t.integer = integer; + + return value; +} +EXPORT_SYMBOL(irias_new_integer_value); + +/* + * Function irias_new_string_value (string) + * + * Create new IAS string value + * + * Per IrLMP 1.1, 4.3.3.2, strings are up to 256 chars - Jean II + */ +struct ias_value *irias_new_string_value(char *string) +{ + struct ias_value *value; + + value = kzalloc(sizeof(struct ias_value), GFP_ATOMIC); + if (value == NULL) + return NULL; + + value->type = IAS_STRING; + value->charset = CS_ASCII; + value->t.string = kstrndup(string, IAS_MAX_STRING, GFP_ATOMIC); + if (!value->t.string) { + net_warn_ratelimited("%s: Unable to kmalloc!\n", __func__); + kfree(value); + return NULL; + } + + value->len = strlen(value->t.string); + + return value; +} + +/* + * Function irias_new_octseq_value (octets, len) + * + * Create new IAS octet-sequence value + * + * Per IrLMP 1.1, 4.3.3.2, octet-sequence are up to 1024 bytes - Jean II + */ +struct ias_value *irias_new_octseq_value(__u8 *octseq , int len) +{ + struct ias_value *value; + + value = kzalloc(sizeof(struct ias_value), GFP_ATOMIC); + if (value == NULL) + return NULL; + + value->type = IAS_OCT_SEQ; + /* Check length */ + if(len > IAS_MAX_OCTET_STRING) + len = IAS_MAX_OCTET_STRING; + value->len = len; + + value->t.oct_seq = kmemdup(octseq, len, GFP_ATOMIC); + if (value->t.oct_seq == NULL){ + net_warn_ratelimited("%s: Unable to kmalloc!\n", __func__); + kfree(value); + return NULL; + } + return value; +} + +struct ias_value *irias_new_missing_value(void) +{ + struct ias_value *value; + + value = kzalloc(sizeof(struct ias_value), GFP_ATOMIC); + if (value == NULL) + return NULL; + + value->type = IAS_MISSING; + + return value; +} + +/* + * Function irias_delete_value (value) + * + * Delete IAS value + * + */ +void irias_delete_value(struct ias_value *value) +{ + IRDA_ASSERT(value != NULL, return;); + + switch (value->type) { + case IAS_INTEGER: /* Fallthrough */ + case IAS_MISSING: + /* No need to deallocate */ + break; + case IAS_STRING: + /* Deallocate string */ + kfree(value->t.string); + break; + case IAS_OCT_SEQ: + /* Deallocate byte stream */ + kfree(value->t.oct_seq); + break; + default: + pr_debug("%s(), Unknown value type!\n", __func__); + break; + } + kfree(value); +} +EXPORT_SYMBOL(irias_delete_value); diff --git a/kernel/net/irda/irlan/Kconfig b/kernel/net/irda/irlan/Kconfig new file mode 100644 index 000000000..951abc2e3 --- /dev/null +++ b/kernel/net/irda/irlan/Kconfig @@ -0,0 +1,14 @@ +config IRLAN + tristate "IrLAN protocol" + depends on IRDA + help + Say Y here if you want to build support for the IrLAN protocol. + To compile it as a module, choose M here: the module will be called + irlan. IrLAN emulates an Ethernet and makes it possible to put up + a wireless LAN using infrared beams. + + The IrLAN protocol can be used to talk with infrared access points + like the HP NetbeamIR, or the ESI JetEye NET. You can also connect + to another Linux machine running the IrLAN protocol for ad-hoc + networking! + diff --git a/kernel/net/irda/irlan/Makefile b/kernel/net/irda/irlan/Makefile new file mode 100644 index 000000000..94eefbc8e --- /dev/null +++ b/kernel/net/irda/irlan/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the Linux IrDA IrLAN protocol layer. +# + +obj-$(CONFIG_IRLAN) += irlan.o + +irlan-y := irlan_common.o irlan_eth.o irlan_event.o irlan_client.o irlan_provider.o irlan_filter.o irlan_provider_event.o irlan_client_event.o diff --git a/kernel/net/irda/irlan/irlan_client.c b/kernel/net/irda/irlan/irlan_client.c new file mode 100644 index 000000000..c5837a40c --- /dev/null +++ b/kernel/net/irda/irlan/irlan_client.c @@ -0,0 +1,559 @@ +/********************************************************************* + * + * Filename: irlan_client.c + * Version: 0.9 + * Description: IrDA LAN Access Protocol (IrLAN) Client + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Sun Aug 31 20:14:37 1997 + * Modified at: Tue Dec 14 15:47:02 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * Sources: skeleton.c by Donald Becker <becker@CESDIS.gsfc.nasa.gov> + * slip.c by Laurence Culhane, <loz@holmes.demon.co.uk> + * Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> + * + * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/if_arp.h> +#include <linux/bitops.h> +#include <net/arp.h> + +#include <asm/byteorder.h> + +#include <net/irda/irda.h> +#include <net/irda/irttp.h> +#include <net/irda/irlmp.h> +#include <net/irda/irias_object.h> +#include <net/irda/iriap.h> +#include <net/irda/timer.h> + +#include <net/irda/irlan_common.h> +#include <net/irda/irlan_event.h> +#include <net/irda/irlan_eth.h> +#include <net/irda/irlan_provider.h> +#include <net/irda/irlan_client.h> + +#undef CONFIG_IRLAN_GRATUITOUS_ARP + +static void irlan_client_ctrl_disconnect_indication(void *instance, void *sap, + LM_REASON reason, + struct sk_buff *); +static int irlan_client_ctrl_data_indication(void *instance, void *sap, + struct sk_buff *skb); +static void irlan_client_ctrl_connect_confirm(void *instance, void *sap, + struct qos_info *qos, + __u32 max_sdu_size, + __u8 max_header_size, + struct sk_buff *); +static void irlan_check_response_param(struct irlan_cb *self, char *param, + char *value, int val_len); +static void irlan_client_open_ctrl_tsap(struct irlan_cb *self); + +static void irlan_client_kick_timer_expired(void *data) +{ + struct irlan_cb *self = (struct irlan_cb *) data; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + /* + * If we are in peer mode, the client may not have got the discovery + * indication it needs to make progress. If the client is still in + * IDLE state, we must kick it to, but only if the provider is not IDLE + */ + if ((self->provider.access_type == ACCESS_PEER) && + (self->client.state == IRLAN_IDLE) && + (self->provider.state != IRLAN_IDLE)) { + irlan_client_wakeup(self, self->saddr, self->daddr); + } +} + +static void irlan_client_start_kick_timer(struct irlan_cb *self, int timeout) +{ + irda_start_timer(&self->client.kick_timer, timeout, (void *) self, + irlan_client_kick_timer_expired); +} + +/* + * Function irlan_client_wakeup (self, saddr, daddr) + * + * Wake up client + * + */ +void irlan_client_wakeup(struct irlan_cb *self, __u32 saddr, __u32 daddr) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + /* + * Check if we are already awake, or if we are a provider in direct + * mode (in that case we must leave the client idle + */ + if ((self->client.state != IRLAN_IDLE) || + (self->provider.access_type == ACCESS_DIRECT)) + { + pr_debug("%s(), already awake!\n", __func__); + return; + } + + /* Addresses may have changed! */ + self->saddr = saddr; + self->daddr = daddr; + + if (self->disconnect_reason == LM_USER_REQUEST) { + pr_debug("%s(), still stopped by user\n", __func__); + return; + } + + /* Open TSAPs */ + irlan_client_open_ctrl_tsap(self); + irlan_open_data_tsap(self); + + irlan_do_client_event(self, IRLAN_DISCOVERY_INDICATION, NULL); + + /* Start kick timer */ + irlan_client_start_kick_timer(self, 2*HZ); +} + +/* + * Function irlan_discovery_indication (daddr) + * + * Remote device with IrLAN server support discovered + * + */ +void irlan_client_discovery_indication(discinfo_t *discovery, + DISCOVERY_MODE mode, + void *priv) +{ + struct irlan_cb *self; + __u32 saddr, daddr; + + IRDA_ASSERT(discovery != NULL, return;); + + /* + * I didn't check it, but I bet that IrLAN suffer from the same + * deficiency as IrComm and doesn't handle two instances + * simultaneously connecting to each other. + * Same workaround, drop passive discoveries. + * Jean II */ + if(mode == DISCOVERY_PASSIVE) + return; + + saddr = discovery->saddr; + daddr = discovery->daddr; + + /* Find instance */ + rcu_read_lock(); + self = irlan_get_any(); + if (self) { + IRDA_ASSERT(self->magic == IRLAN_MAGIC, goto out;); + + pr_debug("%s(), Found instance (%08x)!\n", __func__ , + daddr); + + irlan_client_wakeup(self, saddr, daddr); + } +IRDA_ASSERT_LABEL(out:) + rcu_read_unlock(); +} + +/* + * Function irlan_client_data_indication (handle, skb) + * + * This function gets the data that is received on the control channel + * + */ +static int irlan_client_ctrl_data_indication(void *instance, void *sap, + struct sk_buff *skb) +{ + struct irlan_cb *self; + + self = instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;); + IRDA_ASSERT(skb != NULL, return -1;); + + irlan_do_client_event(self, IRLAN_DATA_INDICATION, skb); + + /* Ready for a new command */ + pr_debug("%s(), clearing tx_busy\n", __func__); + self->client.tx_busy = FALSE; + + /* Check if we have some queued commands waiting to be sent */ + irlan_run_ctrl_tx_queue(self); + + return 0; +} + +static void irlan_client_ctrl_disconnect_indication(void *instance, void *sap, + LM_REASON reason, + struct sk_buff *userdata) +{ + struct irlan_cb *self; + struct tsap_cb *tsap; + struct sk_buff *skb; + + pr_debug("%s(), reason=%d\n", __func__ , reason); + + self = instance; + tsap = sap; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + IRDA_ASSERT(tsap != NULL, return;); + IRDA_ASSERT(tsap->magic == TTP_TSAP_MAGIC, return;); + + IRDA_ASSERT(tsap == self->client.tsap_ctrl, return;); + + /* Remove frames queued on the control channel */ + while ((skb = skb_dequeue(&self->client.txq)) != NULL) { + dev_kfree_skb(skb); + } + self->client.tx_busy = FALSE; + + irlan_do_client_event(self, IRLAN_LMP_DISCONNECT, NULL); +} + +/* + * Function irlan_client_open_tsaps (self) + * + * Initialize callbacks and open IrTTP TSAPs + * + */ +static void irlan_client_open_ctrl_tsap(struct irlan_cb *self) +{ + struct tsap_cb *tsap; + notify_t notify; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + /* Check if already open */ + if (self->client.tsap_ctrl) + return; + + irda_notify_init(¬ify); + + /* Set up callbacks */ + notify.data_indication = irlan_client_ctrl_data_indication; + notify.connect_confirm = irlan_client_ctrl_connect_confirm; + notify.disconnect_indication = irlan_client_ctrl_disconnect_indication; + notify.instance = self; + strlcpy(notify.name, "IrLAN ctrl (c)", sizeof(notify.name)); + + tsap = irttp_open_tsap(LSAP_ANY, DEFAULT_INITIAL_CREDIT, ¬ify); + if (!tsap) { + pr_debug("%s(), Got no tsap!\n", __func__); + return; + } + self->client.tsap_ctrl = tsap; +} + +/* + * Function irlan_client_connect_confirm (handle, skb) + * + * Connection to peer IrLAN laye confirmed + * + */ +static void irlan_client_ctrl_connect_confirm(void *instance, void *sap, + struct qos_info *qos, + __u32 max_sdu_size, + __u8 max_header_size, + struct sk_buff *skb) +{ + struct irlan_cb *self; + + self = instance; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + self->client.max_sdu_size = max_sdu_size; + self->client.max_header_size = max_header_size; + + /* TODO: we could set the MTU depending on the max_sdu_size */ + + irlan_do_client_event(self, IRLAN_CONNECT_COMPLETE, NULL); +} + +/* + * Function print_ret_code (code) + * + * Print return code of request to peer IrLAN layer. + * + */ +static void print_ret_code(__u8 code) +{ + switch(code) { + case 0: + printk(KERN_INFO "Success\n"); + break; + case 1: + net_warn_ratelimited("IrLAN: Insufficient resources\n"); + break; + case 2: + net_warn_ratelimited("IrLAN: Invalid command format\n"); + break; + case 3: + net_warn_ratelimited("IrLAN: Command not supported\n"); + break; + case 4: + net_warn_ratelimited("IrLAN: Parameter not supported\n"); + break; + case 5: + net_warn_ratelimited("IrLAN: Value not supported\n"); + break; + case 6: + net_warn_ratelimited("IrLAN: Not open\n"); + break; + case 7: + net_warn_ratelimited("IrLAN: Authentication required\n"); + break; + case 8: + net_warn_ratelimited("IrLAN: Invalid password\n"); + break; + case 9: + net_warn_ratelimited("IrLAN: Protocol error\n"); + break; + case 255: + net_warn_ratelimited("IrLAN: Asynchronous status\n"); + break; + } +} + +/* + * Function irlan_client_parse_response (self, skb) + * + * Extract all parameters from received buffer, then feed them to + * check_params for parsing + */ +void irlan_client_parse_response(struct irlan_cb *self, struct sk_buff *skb) +{ + __u8 *frame; + __u8 *ptr; + int count; + int ret; + __u16 val_len; + int i; + char *name; + char *value; + + IRDA_ASSERT(skb != NULL, return;); + + pr_debug("%s() skb->len=%d\n", __func__ , (int)skb->len); + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + if (!skb) { + net_err_ratelimited("%s(), Got NULL skb!\n", __func__); + return; + } + frame = skb->data; + + /* + * Check return code and print it if not success + */ + if (frame[0]) { + print_ret_code(frame[0]); + return; + } + + name = kmalloc(255, GFP_ATOMIC); + if (!name) + return; + value = kmalloc(1016, GFP_ATOMIC); + if (!value) { + kfree(name); + return; + } + + /* How many parameters? */ + count = frame[1]; + + pr_debug("%s(), got %d parameters\n", __func__ , count); + + ptr = frame+2; + + /* For all parameters */ + for (i=0; i<count;i++) { + ret = irlan_extract_param(ptr, name, value, &val_len); + if (ret < 0) { + pr_debug("%s(), IrLAN, Error!\n", __func__); + break; + } + ptr += ret; + irlan_check_response_param(self, name, value, val_len); + } + /* Cleanup */ + kfree(name); + kfree(value); +} + +/* + * Function irlan_check_response_param (self, param, value, val_len) + * + * Check which parameter is received and update local variables + * + */ +static void irlan_check_response_param(struct irlan_cb *self, char *param, + char *value, int val_len) +{ + __u16 tmp_cpu; /* Temporary value in host order */ + __u8 *bytes; + int i; + + pr_debug("%s(), parm=%s\n", __func__ , param); + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + /* Media type */ + if (strcmp(param, "MEDIA") == 0) { + if (strcmp(value, "802.3") == 0) + self->media = MEDIA_802_3; + else + self->media = MEDIA_802_5; + return; + } + if (strcmp(param, "FILTER_TYPE") == 0) { + if (strcmp(value, "DIRECTED") == 0) + self->client.filter_type |= IRLAN_DIRECTED; + else if (strcmp(value, "FUNCTIONAL") == 0) + self->client.filter_type |= IRLAN_FUNCTIONAL; + else if (strcmp(value, "GROUP") == 0) + self->client.filter_type |= IRLAN_GROUP; + else if (strcmp(value, "MAC_FRAME") == 0) + self->client.filter_type |= IRLAN_MAC_FRAME; + else if (strcmp(value, "MULTICAST") == 0) + self->client.filter_type |= IRLAN_MULTICAST; + else if (strcmp(value, "BROADCAST") == 0) + self->client.filter_type |= IRLAN_BROADCAST; + else if (strcmp(value, "IPX_SOCKET") == 0) + self->client.filter_type |= IRLAN_IPX_SOCKET; + + } + if (strcmp(param, "ACCESS_TYPE") == 0) { + if (strcmp(value, "DIRECT") == 0) + self->client.access_type = ACCESS_DIRECT; + else if (strcmp(value, "PEER") == 0) + self->client.access_type = ACCESS_PEER; + else if (strcmp(value, "HOSTED") == 0) + self->client.access_type = ACCESS_HOSTED; + else { + pr_debug("%s(), unknown access type!\n", __func__); + } + } + /* IRLAN version */ + if (strcmp(param, "IRLAN_VER") == 0) { + pr_debug("IrLAN version %d.%d\n", (__u8)value[0], + (__u8)value[1]); + + self->version[0] = value[0]; + self->version[1] = value[1]; + return; + } + /* Which remote TSAP to use for data channel */ + if (strcmp(param, "DATA_CHAN") == 0) { + self->dtsap_sel_data = value[0]; + pr_debug("Data TSAP = %02x\n", self->dtsap_sel_data); + return; + } + if (strcmp(param, "CON_ARB") == 0) { + memcpy(&tmp_cpu, value, 2); /* Align value */ + le16_to_cpus(&tmp_cpu); /* Convert to host order */ + self->client.recv_arb_val = tmp_cpu; + pr_debug("%s(), receive arb val=%d\n", __func__ , + self->client.recv_arb_val); + } + if (strcmp(param, "MAX_FRAME") == 0) { + memcpy(&tmp_cpu, value, 2); /* Align value */ + le16_to_cpus(&tmp_cpu); /* Convert to host order */ + self->client.max_frame = tmp_cpu; + pr_debug("%s(), max frame=%d\n", __func__ , + self->client.max_frame); + } + + /* RECONNECT_KEY, in case the link goes down! */ + if (strcmp(param, "RECONNECT_KEY") == 0) { + pr_debug("Got reconnect key: "); + /* for (i = 0; i < val_len; i++) */ +/* printk("%02x", value[i]); */ + memcpy(self->client.reconnect_key, value, val_len); + self->client.key_len = val_len; + pr_debug("\n"); + } + /* FILTER_ENTRY, have we got an ethernet address? */ + if (strcmp(param, "FILTER_ENTRY") == 0) { + bytes = value; + pr_debug("Ethernet address = %pM\n", bytes); + for (i = 0; i < 6; i++) + self->dev->dev_addr[i] = bytes[i]; + } +} + +/* + * Function irlan_client_get_value_confirm (obj_id, value) + * + * Got results from remote LM-IAS + * + */ +void irlan_client_get_value_confirm(int result, __u16 obj_id, + struct ias_value *value, void *priv) +{ + struct irlan_cb *self; + + IRDA_ASSERT(priv != NULL, return;); + + self = priv; + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + /* We probably don't need to make any more queries */ + iriap_close(self->client.iriap); + self->client.iriap = NULL; + + /* Check if request succeeded */ + if (result != IAS_SUCCESS) { + pr_debug("%s(), got NULL value!\n", __func__); + irlan_do_client_event(self, IRLAN_IAS_PROVIDER_NOT_AVAIL, + NULL); + return; + } + + switch (value->type) { + case IAS_INTEGER: + self->dtsap_sel_ctrl = value->t.integer; + + if (value->t.integer != -1) { + irlan_do_client_event(self, IRLAN_IAS_PROVIDER_AVAIL, + NULL); + return; + } + irias_delete_value(value); + break; + default: + pr_debug("%s(), unknown type!\n", __func__); + break; + } + irlan_do_client_event(self, IRLAN_IAS_PROVIDER_NOT_AVAIL, NULL); +} diff --git a/kernel/net/irda/irlan/irlan_client_event.c b/kernel/net/irda/irlan/irlan_client_event.c new file mode 100644 index 000000000..cc93fabbb --- /dev/null +++ b/kernel/net/irda/irlan/irlan_client_event.c @@ -0,0 +1,511 @@ +/********************************************************************* + * + * Filename: irlan_client_event.c + * Version: 0.9 + * Description: IrLAN client state machine + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Sun Aug 31 20:14:37 1997 + * Modified at: Sun Dec 26 21:52:24 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/skbuff.h> + +#include <net/irda/irda.h> +#include <net/irda/timer.h> +#include <net/irda/irmod.h> +#include <net/irda/iriap.h> +#include <net/irda/irlmp.h> +#include <net/irda/irttp.h> + +#include <net/irda/irlan_common.h> +#include <net/irda/irlan_client.h> +#include <net/irda/irlan_event.h> + +static int irlan_client_state_idle (struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb); +static int irlan_client_state_query(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb); +static int irlan_client_state_conn (struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb); +static int irlan_client_state_info (struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb); +static int irlan_client_state_media(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb); +static int irlan_client_state_open (struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb); +static int irlan_client_state_wait (struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb); +static int irlan_client_state_arb (struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb); +static int irlan_client_state_data (struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb); +static int irlan_client_state_close(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb); +static int irlan_client_state_sync (struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb); + +static int (*state[])(struct irlan_cb *, IRLAN_EVENT event, struct sk_buff *) = +{ + irlan_client_state_idle, + irlan_client_state_query, + irlan_client_state_conn, + irlan_client_state_info, + irlan_client_state_media, + irlan_client_state_open, + irlan_client_state_wait, + irlan_client_state_arb, + irlan_client_state_data, + irlan_client_state_close, + irlan_client_state_sync +}; + +void irlan_do_client_event(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + (*state[ self->client.state]) (self, event, skb); +} + +/* + * Function irlan_client_state_idle (event, skb, info) + * + * IDLE, We are waiting for an indication that there is a provider + * available. + */ +static int irlan_client_state_idle(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;); + + switch (event) { + case IRLAN_DISCOVERY_INDICATION: + if (self->client.iriap) { + net_warn_ratelimited("%s(), busy with a previous query\n", + __func__); + return -EBUSY; + } + + self->client.iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self, + irlan_client_get_value_confirm); + /* Get some values from peer IAS */ + irlan_next_client_state(self, IRLAN_QUERY); + iriap_getvaluebyclass_request(self->client.iriap, + self->saddr, self->daddr, + "IrLAN", "IrDA:TinyTP:LsapSel"); + break; + case IRLAN_WATCHDOG_TIMEOUT: + pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__); + break; + default: + pr_debug("%s(), Unknown event %d\n", __func__ , event); + break; + } + if (skb) + dev_kfree_skb(skb); + + return 0; +} + +/* + * Function irlan_client_state_query (event, skb, info) + * + * QUERY, We have queryed the remote IAS and is ready to connect + * to provider, just waiting for the confirm. + * + */ +static int irlan_client_state_query(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;); + + switch(event) { + case IRLAN_IAS_PROVIDER_AVAIL: + IRDA_ASSERT(self->dtsap_sel_ctrl != 0, return -1;); + + self->client.open_retries = 0; + + irttp_connect_request(self->client.tsap_ctrl, + self->dtsap_sel_ctrl, + self->saddr, self->daddr, NULL, + IRLAN_MTU, NULL); + irlan_next_client_state(self, IRLAN_CONN); + break; + case IRLAN_IAS_PROVIDER_NOT_AVAIL: + pr_debug("%s(), IAS_PROVIDER_NOT_AVAIL\n", __func__); + irlan_next_client_state(self, IRLAN_IDLE); + + /* Give the client a kick! */ + if ((self->provider.access_type == ACCESS_PEER) && + (self->provider.state != IRLAN_IDLE)) + irlan_client_wakeup(self, self->saddr, self->daddr); + break; + case IRLAN_LMP_DISCONNECT: + case IRLAN_LAP_DISCONNECT: + irlan_next_client_state(self, IRLAN_IDLE); + break; + case IRLAN_WATCHDOG_TIMEOUT: + pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__); + break; + default: + pr_debug("%s(), Unknown event %d\n", __func__ , event); + break; + } + if (skb) + dev_kfree_skb(skb); + + return 0; +} + +/* + * Function irlan_client_state_conn (event, skb, info) + * + * CONN, We have connected to a provider but has not issued any + * commands yet. + * + */ +static int irlan_client_state_conn(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return -1;); + + switch (event) { + case IRLAN_CONNECT_COMPLETE: + /* Send getinfo cmd */ + irlan_get_provider_info(self); + irlan_next_client_state(self, IRLAN_INFO); + break; + case IRLAN_LMP_DISCONNECT: + case IRLAN_LAP_DISCONNECT: + irlan_next_client_state(self, IRLAN_IDLE); + break; + case IRLAN_WATCHDOG_TIMEOUT: + pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__); + break; + default: + pr_debug("%s(), Unknown event %d\n", __func__ , event); + break; + } + if (skb) + dev_kfree_skb(skb); + + return 0; +} + +/* + * Function irlan_client_state_info (self, event, skb, info) + * + * INFO, We have issued a GetInfo command and is awaiting a reply. + */ +static int irlan_client_state_info(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return -1;); + + switch (event) { + case IRLAN_DATA_INDICATION: + IRDA_ASSERT(skb != NULL, return -1;); + + irlan_client_parse_response(self, skb); + + irlan_next_client_state(self, IRLAN_MEDIA); + + irlan_get_media_char(self); + break; + + case IRLAN_LMP_DISCONNECT: + case IRLAN_LAP_DISCONNECT: + irlan_next_client_state(self, IRLAN_IDLE); + break; + case IRLAN_WATCHDOG_TIMEOUT: + pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__); + break; + default: + pr_debug("%s(), Unknown event %d\n", __func__ , event); + break; + } + if (skb) + dev_kfree_skb(skb); + + return 0; +} + +/* + * Function irlan_client_state_media (self, event, skb, info) + * + * MEDIA, The irlan_client has issued a GetMedia command and is awaiting a + * reply. + * + */ +static int irlan_client_state_media(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return -1;); + + switch(event) { + case IRLAN_DATA_INDICATION: + irlan_client_parse_response(self, skb); + irlan_open_data_channel(self); + irlan_next_client_state(self, IRLAN_OPEN); + break; + case IRLAN_LMP_DISCONNECT: + case IRLAN_LAP_DISCONNECT: + irlan_next_client_state(self, IRLAN_IDLE); + break; + case IRLAN_WATCHDOG_TIMEOUT: + pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__); + break; + default: + pr_debug("%s(), Unknown event %d\n", __func__ , event); + break; + } + if (skb) + dev_kfree_skb(skb); + + return 0; +} + +/* + * Function irlan_client_state_open (self, event, skb, info) + * + * OPEN, The irlan_client has issued a OpenData command and is awaiting a + * reply + * + */ +static int irlan_client_state_open(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb) +{ + struct qos_info qos; + + IRDA_ASSERT(self != NULL, return -1;); + + switch(event) { + case IRLAN_DATA_INDICATION: + irlan_client_parse_response(self, skb); + + /* + * Check if we have got the remote TSAP for data + * communications + */ + IRDA_ASSERT(self->dtsap_sel_data != 0, return -1;); + + /* Check which access type we are dealing with */ + switch (self->client.access_type) { + case ACCESS_PEER: + if (self->provider.state == IRLAN_OPEN) { + + irlan_next_client_state(self, IRLAN_ARB); + irlan_do_client_event(self, IRLAN_CHECK_CON_ARB, + NULL); + } else { + + irlan_next_client_state(self, IRLAN_WAIT); + } + break; + case ACCESS_DIRECT: + case ACCESS_HOSTED: + qos.link_disc_time.bits = 0x01; /* 3 secs */ + + irttp_connect_request(self->tsap_data, + self->dtsap_sel_data, + self->saddr, self->daddr, &qos, + IRLAN_MTU, NULL); + + irlan_next_client_state(self, IRLAN_DATA); + break; + default: + pr_debug("%s(), unknown access type!\n", __func__); + break; + } + break; + case IRLAN_LMP_DISCONNECT: + case IRLAN_LAP_DISCONNECT: + irlan_next_client_state(self, IRLAN_IDLE); + break; + case IRLAN_WATCHDOG_TIMEOUT: + pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__); + break; + default: + pr_debug("%s(), Unknown event %d\n", __func__ , event); + break; + } + + if (skb) + dev_kfree_skb(skb); + + return 0; +} + +/* + * Function irlan_client_state_wait (self, event, skb, info) + * + * WAIT, The irlan_client is waiting for the local provider to enter the + * provider OPEN state. + * + */ +static int irlan_client_state_wait(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return -1;); + + switch(event) { + case IRLAN_PROVIDER_SIGNAL: + irlan_next_client_state(self, IRLAN_ARB); + irlan_do_client_event(self, IRLAN_CHECK_CON_ARB, NULL); + break; + case IRLAN_LMP_DISCONNECT: + case IRLAN_LAP_DISCONNECT: + irlan_next_client_state(self, IRLAN_IDLE); + break; + case IRLAN_WATCHDOG_TIMEOUT: + pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__); + break; + default: + pr_debug("%s(), Unknown event %d\n", __func__ , event); + break; + } + if (skb) + dev_kfree_skb(skb); + + return 0; +} + +static int irlan_client_state_arb(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb) +{ + struct qos_info qos; + + IRDA_ASSERT(self != NULL, return -1;); + + switch(event) { + case IRLAN_CHECK_CON_ARB: + if (self->client.recv_arb_val == self->provider.send_arb_val) { + irlan_next_client_state(self, IRLAN_CLOSE); + irlan_close_data_channel(self); + } else if (self->client.recv_arb_val < + self->provider.send_arb_val) + { + qos.link_disc_time.bits = 0x01; /* 3 secs */ + + irlan_next_client_state(self, IRLAN_DATA); + irttp_connect_request(self->tsap_data, + self->dtsap_sel_data, + self->saddr, self->daddr, &qos, + IRLAN_MTU, NULL); + } else if (self->client.recv_arb_val > + self->provider.send_arb_val) + { + pr_debug("%s(), lost the battle :-(\n", __func__); + } + break; + case IRLAN_DATA_CONNECT_INDICATION: + irlan_next_client_state(self, IRLAN_DATA); + break; + case IRLAN_LMP_DISCONNECT: + case IRLAN_LAP_DISCONNECT: + irlan_next_client_state(self, IRLAN_IDLE); + break; + case IRLAN_WATCHDOG_TIMEOUT: + pr_debug("%s(), IRLAN_WATCHDOG_TIMEOUT\n", __func__); + break; + default: + pr_debug("%s(), Unknown event %d\n", __func__ , event); + break; + } + if (skb) + dev_kfree_skb(skb); + + return 0; +} + +/* + * Function irlan_client_state_data (self, event, skb, info) + * + * DATA, The data channel is connected, allowing data transfers between + * the local and remote machines. + * + */ +static int irlan_client_state_data(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;); + + switch(event) { + case IRLAN_DATA_INDICATION: + irlan_client_parse_response(self, skb); + break; + case IRLAN_LMP_DISCONNECT: /* FALLTHROUGH */ + case IRLAN_LAP_DISCONNECT: + irlan_next_client_state(self, IRLAN_IDLE); + break; + default: + pr_debug("%s(), Unknown event %d\n", __func__ , event); + break; + } + if (skb) + dev_kfree_skb(skb); + + return 0; +} + +/* + * Function irlan_client_state_close (self, event, skb, info) + * + * + * + */ +static int irlan_client_state_close(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb) +{ + if (skb) + dev_kfree_skb(skb); + + return 0; +} + +/* + * Function irlan_client_state_sync (self, event, skb, info) + * + * + * + */ +static int irlan_client_state_sync(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb) +{ + if (skb) + dev_kfree_skb(skb); + + return 0; +} + + + + + + + + + + + + + diff --git a/kernel/net/irda/irlan/irlan_common.c b/kernel/net/irda/irlan/irlan_common.c new file mode 100644 index 000000000..481bbc2a4 --- /dev/null +++ b/kernel/net/irda/irlan/irlan_common.c @@ -0,0 +1,1176 @@ +/********************************************************************* + * + * Filename: irlan_common.c + * Version: 0.9 + * Description: IrDA LAN Access Protocol Implementation + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Sun Aug 31 20:14:37 1997 + * Modified at: Sun Dec 26 21:53:10 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1997, 1999 Dag Brattli <dagb@cs.uit.no>, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/module.h> + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/gfp.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/proc_fs.h> +#include <linux/sched.h> +#include <linux/seq_file.h> +#include <linux/random.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/rtnetlink.h> +#include <linux/moduleparam.h> +#include <linux/bitops.h> + +#include <asm/byteorder.h> + +#include <net/irda/irda.h> +#include <net/irda/irttp.h> +#include <net/irda/irlmp.h> +#include <net/irda/iriap.h> +#include <net/irda/timer.h> + +#include <net/irda/irlan_common.h> +#include <net/irda/irlan_client.h> +#include <net/irda/irlan_provider.h> +#include <net/irda/irlan_eth.h> +#include <net/irda/irlan_filter.h> + + +/* extern char sysctl_devname[]; */ + +/* + * Master structure + */ +static LIST_HEAD(irlans); + +static void *ckey; +static void *skey; + +/* Module parameters */ +static bool eth; /* Use "eth" or "irlan" name for devices */ +static int access = ACCESS_PEER; /* PEER, DIRECT or HOSTED */ + +#ifdef CONFIG_PROC_FS +static const char *const irlan_access[] = { + "UNKNOWN", + "DIRECT", + "PEER", + "HOSTED" +}; + +static const char *const irlan_media[] = { + "UNKNOWN", + "802.3", + "802.5" +}; + +extern struct proc_dir_entry *proc_irda; + +static int irlan_seq_open(struct inode *inode, struct file *file); + +static const struct file_operations irlan_fops = { + .owner = THIS_MODULE, + .open = irlan_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +extern struct proc_dir_entry *proc_irda; +#endif /* CONFIG_PROC_FS */ + +static struct irlan_cb __init *irlan_open(__u32 saddr, __u32 daddr); +static void __irlan_close(struct irlan_cb *self); +static int __irlan_insert_param(struct sk_buff *skb, char *param, int type, + __u8 value_byte, __u16 value_short, + __u8 *value_array, __u16 value_len); +static void irlan_open_unicast_addr(struct irlan_cb *self); +static void irlan_get_unicast_addr(struct irlan_cb *self); +void irlan_close_tsaps(struct irlan_cb *self); + +/* + * Function irlan_init (void) + * + * Initialize IrLAN layer + * + */ +static int __init irlan_init(void) +{ + struct irlan_cb *new; + __u16 hints; + +#ifdef CONFIG_PROC_FS + { struct proc_dir_entry *proc; + proc = proc_create("irlan", 0, proc_irda, &irlan_fops); + if (!proc) { + printk(KERN_ERR "irlan_init: can't create /proc entry!\n"); + return -ENODEV; + } + } +#endif /* CONFIG_PROC_FS */ + + hints = irlmp_service_to_hint(S_LAN); + + /* Register with IrLMP as a client */ + ckey = irlmp_register_client(hints, &irlan_client_discovery_indication, + NULL, NULL); + if (!ckey) + goto err_ckey; + + /* Register with IrLMP as a service */ + skey = irlmp_register_service(hints); + if (!skey) + goto err_skey; + + /* Start the master IrLAN instance (the only one for now) */ + new = irlan_open(DEV_ADDR_ANY, DEV_ADDR_ANY); + if (!new) + goto err_open; + + /* The master will only open its (listen) control TSAP */ + irlan_provider_open_ctrl_tsap(new); + + /* Do some fast discovery! */ + irlmp_discovery_request(DISCOVERY_DEFAULT_SLOTS); + + return 0; + +err_open: + irlmp_unregister_service(skey); +err_skey: + irlmp_unregister_client(ckey); +err_ckey: +#ifdef CONFIG_PROC_FS + remove_proc_entry("irlan", proc_irda); +#endif /* CONFIG_PROC_FS */ + + return -ENOMEM; +} + +static void __exit irlan_cleanup(void) +{ + struct irlan_cb *self, *next; + + irlmp_unregister_client(ckey); + irlmp_unregister_service(skey); + +#ifdef CONFIG_PROC_FS + remove_proc_entry("irlan", proc_irda); +#endif /* CONFIG_PROC_FS */ + + /* Cleanup any leftover network devices */ + rtnl_lock(); + list_for_each_entry_safe(self, next, &irlans, dev_list) { + __irlan_close(self); + } + rtnl_unlock(); +} + +/* + * Function irlan_open (void) + * + * Open new instance of a client/provider, we should only register the + * network device if this instance is ment for a particular client/provider + */ +static struct irlan_cb __init *irlan_open(__u32 saddr, __u32 daddr) +{ + struct net_device *dev; + struct irlan_cb *self; + + /* Create network device with irlan */ + dev = alloc_irlandev(eth ? "eth%d" : "irlan%d"); + if (!dev) + return NULL; + + self = netdev_priv(dev); + self->dev = dev; + + /* + * Initialize local device structure + */ + self->magic = IRLAN_MAGIC; + self->saddr = saddr; + self->daddr = daddr; + + /* Provider access can only be PEER, DIRECT, or HOSTED */ + self->provider.access_type = access; + if (access == ACCESS_DIRECT) { + /* + * Since we are emulating an IrLAN sever we will have to + * give ourself an ethernet address! + */ + dev->dev_addr[0] = 0x40; + dev->dev_addr[1] = 0x00; + dev->dev_addr[2] = 0x00; + dev->dev_addr[3] = 0x00; + get_random_bytes(dev->dev_addr+4, 1); + get_random_bytes(dev->dev_addr+5, 1); + } + + self->media = MEDIA_802_3; + self->disconnect_reason = LM_USER_REQUEST; + init_timer(&self->watchdog_timer); + init_timer(&self->client.kick_timer); + init_waitqueue_head(&self->open_wait); + + skb_queue_head_init(&self->client.txq); + + irlan_next_client_state(self, IRLAN_IDLE); + irlan_next_provider_state(self, IRLAN_IDLE); + + if (register_netdev(dev)) { + pr_debug("%s(), register_netdev() failed!\n", + __func__); + self = NULL; + free_netdev(dev); + } else { + rtnl_lock(); + list_add_rcu(&self->dev_list, &irlans); + rtnl_unlock(); + } + + return self; +} +/* + * Function __irlan_close (self) + * + * This function closes and deallocates the IrLAN client instances. Be + * aware that other functions which calls client_close() must + * remove self from irlans list first. + */ +static void __irlan_close(struct irlan_cb *self) +{ + ASSERT_RTNL(); + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + del_timer_sync(&self->watchdog_timer); + del_timer_sync(&self->client.kick_timer); + + /* Close all open connections and remove TSAPs */ + irlan_close_tsaps(self); + + if (self->client.iriap) + iriap_close(self->client.iriap); + + /* Remove frames queued on the control channel */ + skb_queue_purge(&self->client.txq); + + /* Unregister and free self via destructor */ + unregister_netdevice(self->dev); +} + +/* Find any instance of irlan, used for client discovery wakeup */ +struct irlan_cb *irlan_get_any(void) +{ + struct irlan_cb *self; + + list_for_each_entry_rcu(self, &irlans, dev_list) { + return self; + } + return NULL; +} + +/* + * Function irlan_connect_indication (instance, sap, qos, max_sdu_size, skb) + * + * Here we receive the connect indication for the data channel + * + */ +static void irlan_connect_indication(void *instance, void *sap, + struct qos_info *qos, + __u32 max_sdu_size, + __u8 max_header_size, + struct sk_buff *skb) +{ + struct irlan_cb *self; + struct tsap_cb *tsap; + + self = instance; + tsap = sap; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + IRDA_ASSERT(tsap == self->tsap_data,return;); + + self->max_sdu_size = max_sdu_size; + self->max_header_size = max_header_size; + + pr_debug("%s: We are now connected!\n", __func__); + + del_timer(&self->watchdog_timer); + + /* If you want to pass the skb to *both* state machines, you will + * need to skb_clone() it, so that you don't free it twice. + * As the state machines don't need it, git rid of it here... + * Jean II */ + if (skb) + dev_kfree_skb(skb); + + irlan_do_provider_event(self, IRLAN_DATA_CONNECT_INDICATION, NULL); + irlan_do_client_event(self, IRLAN_DATA_CONNECT_INDICATION, NULL); + + if (self->provider.access_type == ACCESS_PEER) { + /* + * Data channel is open, so we are now allowed to + * configure the remote filter + */ + irlan_get_unicast_addr(self); + irlan_open_unicast_addr(self); + } + /* Ready to transfer Ethernet frames (at last) */ + netif_start_queue(self->dev); /* Clear reason */ +} + +static void irlan_connect_confirm(void *instance, void *sap, + struct qos_info *qos, + __u32 max_sdu_size, + __u8 max_header_size, + struct sk_buff *skb) +{ + struct irlan_cb *self; + + self = instance; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + self->max_sdu_size = max_sdu_size; + self->max_header_size = max_header_size; + + /* TODO: we could set the MTU depending on the max_sdu_size */ + + pr_debug("%s: We are now connected!\n", __func__); + del_timer(&self->watchdog_timer); + + /* + * Data channel is open, so we are now allowed to configure the remote + * filter + */ + irlan_get_unicast_addr(self); + irlan_open_unicast_addr(self); + + /* Open broadcast and multicast filter by default */ + irlan_set_broadcast_filter(self, TRUE); + irlan_set_multicast_filter(self, TRUE); + + /* Ready to transfer Ethernet frames */ + netif_start_queue(self->dev); + self->disconnect_reason = 0; /* Clear reason */ + wake_up_interruptible(&self->open_wait); +} + +/* + * Function irlan_client_disconnect_indication (handle) + * + * Callback function for the IrTTP layer. Indicates a disconnection of + * the specified connection (handle) + */ +static void irlan_disconnect_indication(void *instance, + void *sap, LM_REASON reason, + struct sk_buff *userdata) +{ + struct irlan_cb *self; + struct tsap_cb *tsap; + + pr_debug("%s(), reason=%d\n", __func__ , reason); + + self = instance; + tsap = sap; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + IRDA_ASSERT(tsap != NULL, return;); + IRDA_ASSERT(tsap->magic == TTP_TSAP_MAGIC, return;); + + IRDA_ASSERT(tsap == self->tsap_data, return;); + + pr_debug("IrLAN, data channel disconnected by peer!\n"); + + /* Save reason so we know if we should try to reconnect or not */ + self->disconnect_reason = reason; + + switch (reason) { + case LM_USER_REQUEST: /* User request */ + pr_debug("%s(), User requested\n", __func__); + break; + case LM_LAP_DISCONNECT: /* Unexpected IrLAP disconnect */ + pr_debug("%s(), Unexpected IrLAP disconnect\n", __func__); + break; + case LM_CONNECT_FAILURE: /* Failed to establish IrLAP connection */ + pr_debug("%s(), IrLAP connect failed\n", __func__); + break; + case LM_LAP_RESET: /* IrLAP reset */ + pr_debug("%s(), IrLAP reset\n", __func__); + break; + case LM_INIT_DISCONNECT: + pr_debug("%s(), IrLMP connect failed\n", __func__); + break; + default: + net_err_ratelimited("%s(), Unknown disconnect reason\n", + __func__); + break; + } + + /* If you want to pass the skb to *both* state machines, you will + * need to skb_clone() it, so that you don't free it twice. + * As the state machines don't need it, git rid of it here... + * Jean II */ + if (userdata) + dev_kfree_skb(userdata); + + irlan_do_client_event(self, IRLAN_LMP_DISCONNECT, NULL); + irlan_do_provider_event(self, IRLAN_LMP_DISCONNECT, NULL); + + wake_up_interruptible(&self->open_wait); +} + +void irlan_open_data_tsap(struct irlan_cb *self) +{ + struct tsap_cb *tsap; + notify_t notify; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + /* Check if already open */ + if (self->tsap_data) + return; + + irda_notify_init(¬ify); + + notify.data_indication = irlan_eth_receive; + notify.udata_indication = irlan_eth_receive; + notify.connect_indication = irlan_connect_indication; + notify.connect_confirm = irlan_connect_confirm; + notify.flow_indication = irlan_eth_flow_indication; + notify.disconnect_indication = irlan_disconnect_indication; + notify.instance = self; + strlcpy(notify.name, "IrLAN data", sizeof(notify.name)); + + tsap = irttp_open_tsap(LSAP_ANY, DEFAULT_INITIAL_CREDIT, ¬ify); + if (!tsap) { + pr_debug("%s(), Got no tsap!\n", __func__); + return; + } + self->tsap_data = tsap; + + /* + * This is the data TSAP selector which we will pass to the client + * when the client ask for it. + */ + self->stsap_sel_data = self->tsap_data->stsap_sel; +} + +void irlan_close_tsaps(struct irlan_cb *self) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + /* Disconnect and close all open TSAP connections */ + if (self->tsap_data) { + irttp_disconnect_request(self->tsap_data, NULL, P_NORMAL); + irttp_close_tsap(self->tsap_data); + self->tsap_data = NULL; + } + if (self->client.tsap_ctrl) { + irttp_disconnect_request(self->client.tsap_ctrl, NULL, + P_NORMAL); + irttp_close_tsap(self->client.tsap_ctrl); + self->client.tsap_ctrl = NULL; + } + if (self->provider.tsap_ctrl) { + irttp_disconnect_request(self->provider.tsap_ctrl, NULL, + P_NORMAL); + irttp_close_tsap(self->provider.tsap_ctrl); + self->provider.tsap_ctrl = NULL; + } + self->disconnect_reason = LM_USER_REQUEST; +} + +/* + * Function irlan_ias_register (self, tsap_sel) + * + * Register with LM-IAS + * + */ +void irlan_ias_register(struct irlan_cb *self, __u8 tsap_sel) +{ + struct ias_object *obj; + struct ias_value *new_value; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + /* + * Check if object has already been registered by a previous provider. + * If that is the case, we just change the value of the attribute + */ + if (!irias_find_object("IrLAN")) { + obj = irias_new_object("IrLAN", IAS_IRLAN_ID); + irias_add_integer_attrib(obj, "IrDA:TinyTP:LsapSel", tsap_sel, + IAS_KERNEL_ATTR); + irias_insert_object(obj); + } else { + new_value = irias_new_integer_value(tsap_sel); + irias_object_change_attribute("IrLAN", "IrDA:TinyTP:LsapSel", + new_value); + } + + /* Register PnP object only if not registered before */ + if (!irias_find_object("PnP")) { + obj = irias_new_object("PnP", IAS_PNP_ID); +#if 0 + irias_add_string_attrib(obj, "Name", sysctl_devname, + IAS_KERNEL_ATTR); +#else + irias_add_string_attrib(obj, "Name", "Linux", IAS_KERNEL_ATTR); +#endif + irias_add_string_attrib(obj, "DeviceID", "HWP19F0", + IAS_KERNEL_ATTR); + irias_add_integer_attrib(obj, "CompCnt", 1, IAS_KERNEL_ATTR); + if (self->provider.access_type == ACCESS_PEER) + irias_add_string_attrib(obj, "Comp#01", "PNP8389", + IAS_KERNEL_ATTR); + else + irias_add_string_attrib(obj, "Comp#01", "PNP8294", + IAS_KERNEL_ATTR); + + irias_add_string_attrib(obj, "Manufacturer", + "Linux-IrDA Project", IAS_KERNEL_ATTR); + irias_insert_object(obj); + } +} + +/* + * Function irlan_run_ctrl_tx_queue (self) + * + * Try to send the next command in the control transmit queue + * + */ +int irlan_run_ctrl_tx_queue(struct irlan_cb *self) +{ + struct sk_buff *skb; + + if (irda_lock(&self->client.tx_busy) == FALSE) + return -EBUSY; + + skb = skb_dequeue(&self->client.txq); + if (!skb) { + self->client.tx_busy = FALSE; + return 0; + } + + /* Check that it's really possible to send commands */ + if ((self->client.tsap_ctrl == NULL) || + (self->client.state == IRLAN_IDLE)) + { + self->client.tx_busy = FALSE; + dev_kfree_skb(skb); + return -1; + } + pr_debug("%s(), sending ...\n", __func__); + + return irttp_data_request(self->client.tsap_ctrl, skb); +} + +/* + * Function irlan_ctrl_data_request (self, skb) + * + * This function makes sure that commands on the control channel is being + * sent in a command/response fashion + */ +static void irlan_ctrl_data_request(struct irlan_cb *self, struct sk_buff *skb) +{ + /* Queue command */ + skb_queue_tail(&self->client.txq, skb); + + /* Try to send command */ + irlan_run_ctrl_tx_queue(self); +} + +/* + * Function irlan_get_provider_info (self) + * + * Send Get Provider Information command to peer IrLAN layer + * + */ +void irlan_get_provider_info(struct irlan_cb *self) +{ + struct sk_buff *skb; + __u8 *frame; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER, + GFP_ATOMIC); + if (!skb) + return; + + /* Reserve space for TTP, LMP, and LAP header */ + skb_reserve(skb, self->client.max_header_size); + skb_put(skb, 2); + + frame = skb->data; + + frame[0] = CMD_GET_PROVIDER_INFO; + frame[1] = 0x00; /* Zero parameters */ + + irlan_ctrl_data_request(self, skb); +} + +/* + * Function irlan_open_data_channel (self) + * + * Send an Open Data Command to provider + * + */ +void irlan_open_data_channel(struct irlan_cb *self) +{ + struct sk_buff *skb; + __u8 *frame; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + + IRLAN_STRING_PARAMETER_LEN("MEDIA", "802.3") + + IRLAN_STRING_PARAMETER_LEN("ACCESS_TYPE", "DIRECT"), + GFP_ATOMIC); + if (!skb) + return; + + skb_reserve(skb, self->client.max_header_size); + skb_put(skb, 2); + + frame = skb->data; + + /* Build frame */ + frame[0] = CMD_OPEN_DATA_CHANNEL; + frame[1] = 0x02; /* Two parameters */ + + irlan_insert_string_param(skb, "MEDIA", "802.3"); + irlan_insert_string_param(skb, "ACCESS_TYPE", "DIRECT"); + /* irlan_insert_string_param(skb, "MODE", "UNRELIABLE"); */ + +/* self->use_udata = TRUE; */ + + irlan_ctrl_data_request(self, skb); +} + +void irlan_close_data_channel(struct irlan_cb *self) +{ + struct sk_buff *skb; + __u8 *frame; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + /* Check if the TSAP is still there */ + if (self->client.tsap_ctrl == NULL) + return; + + skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + + IRLAN_BYTE_PARAMETER_LEN("DATA_CHAN"), + GFP_ATOMIC); + if (!skb) + return; + + skb_reserve(skb, self->client.max_header_size); + skb_put(skb, 2); + + frame = skb->data; + + /* Build frame */ + frame[0] = CMD_CLOSE_DATA_CHAN; + frame[1] = 0x01; /* One parameter */ + + irlan_insert_byte_param(skb, "DATA_CHAN", self->dtsap_sel_data); + + irlan_ctrl_data_request(self, skb); +} + +/* + * Function irlan_open_unicast_addr (self) + * + * Make IrLAN provider accept ethernet frames addressed to the unicast + * address. + * + */ +static void irlan_open_unicast_addr(struct irlan_cb *self) +{ + struct sk_buff *skb; + __u8 *frame; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + + IRLAN_BYTE_PARAMETER_LEN("DATA_CHAN") + + IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "DIRECTED") + + IRLAN_STRING_PARAMETER_LEN("FILTER_MODE", "FILTER"), + GFP_ATOMIC); + if (!skb) + return; + + /* Reserve space for TTP, LMP, and LAP header */ + skb_reserve(skb, self->max_header_size); + skb_put(skb, 2); + + frame = skb->data; + + frame[0] = CMD_FILTER_OPERATION; + frame[1] = 0x03; /* Three parameters */ + irlan_insert_byte_param(skb, "DATA_CHAN" , self->dtsap_sel_data); + irlan_insert_string_param(skb, "FILTER_TYPE", "DIRECTED"); + irlan_insert_string_param(skb, "FILTER_MODE", "FILTER"); + + irlan_ctrl_data_request(self, skb); +} + +/* + * Function irlan_set_broadcast_filter (self, status) + * + * Make IrLAN provider accept ethernet frames addressed to the broadcast + * address. Be careful with the use of this one, since there may be a lot + * of broadcast traffic out there. We can still function without this + * one but then _we_ have to initiate all communication with other + * hosts, since ARP request for this host will not be answered. + */ +void irlan_set_broadcast_filter(struct irlan_cb *self, int status) +{ + struct sk_buff *skb; + __u8 *frame; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + + IRLAN_BYTE_PARAMETER_LEN("DATA_CHAN") + + IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "BROADCAST") + + /* We may waste one byte here...*/ + IRLAN_STRING_PARAMETER_LEN("FILTER_MODE", "FILTER"), + GFP_ATOMIC); + if (!skb) + return; + + /* Reserve space for TTP, LMP, and LAP header */ + skb_reserve(skb, self->client.max_header_size); + skb_put(skb, 2); + + frame = skb->data; + + frame[0] = CMD_FILTER_OPERATION; + frame[1] = 0x03; /* Three parameters */ + irlan_insert_byte_param(skb, "DATA_CHAN", self->dtsap_sel_data); + irlan_insert_string_param(skb, "FILTER_TYPE", "BROADCAST"); + if (status) + irlan_insert_string_param(skb, "FILTER_MODE", "FILTER"); + else + irlan_insert_string_param(skb, "FILTER_MODE", "NONE"); + + irlan_ctrl_data_request(self, skb); +} + +/* + * Function irlan_set_multicast_filter (self, status) + * + * Make IrLAN provider accept ethernet frames addressed to the multicast + * address. + * + */ +void irlan_set_multicast_filter(struct irlan_cb *self, int status) +{ + struct sk_buff *skb; + __u8 *frame; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + + IRLAN_BYTE_PARAMETER_LEN("DATA_CHAN") + + IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "MULTICAST") + + /* We may waste one byte here...*/ + IRLAN_STRING_PARAMETER_LEN("FILTER_MODE", "NONE"), + GFP_ATOMIC); + if (!skb) + return; + + /* Reserve space for TTP, LMP, and LAP header */ + skb_reserve(skb, self->client.max_header_size); + skb_put(skb, 2); + + frame = skb->data; + + frame[0] = CMD_FILTER_OPERATION; + frame[1] = 0x03; /* Three parameters */ + irlan_insert_byte_param(skb, "DATA_CHAN", self->dtsap_sel_data); + irlan_insert_string_param(skb, "FILTER_TYPE", "MULTICAST"); + if (status) + irlan_insert_string_param(skb, "FILTER_MODE", "ALL"); + else + irlan_insert_string_param(skb, "FILTER_MODE", "NONE"); + + irlan_ctrl_data_request(self, skb); +} + +/* + * Function irlan_get_unicast_addr (self) + * + * Retrieves the unicast address from the IrLAN provider. This address + * will be inserted into the devices structure, so the ethernet layer + * can construct its packets. + * + */ +static void irlan_get_unicast_addr(struct irlan_cb *self) +{ + struct sk_buff *skb; + __u8 *frame; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + + IRLAN_BYTE_PARAMETER_LEN("DATA_CHAN") + + IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "DIRECTED") + + IRLAN_STRING_PARAMETER_LEN("FILTER_OPERATION", + "DYNAMIC"), + GFP_ATOMIC); + if (!skb) + return; + + /* Reserve space for TTP, LMP, and LAP header */ + skb_reserve(skb, self->client.max_header_size); + skb_put(skb, 2); + + frame = skb->data; + + frame[0] = CMD_FILTER_OPERATION; + frame[1] = 0x03; /* Three parameters */ + irlan_insert_byte_param(skb, "DATA_CHAN", self->dtsap_sel_data); + irlan_insert_string_param(skb, "FILTER_TYPE", "DIRECTED"); + irlan_insert_string_param(skb, "FILTER_OPERATION", "DYNAMIC"); + + irlan_ctrl_data_request(self, skb); +} + +/* + * Function irlan_get_media_char (self) + * + * + * + */ +void irlan_get_media_char(struct irlan_cb *self) +{ + struct sk_buff *skb; + __u8 *frame; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + + IRLAN_STRING_PARAMETER_LEN("MEDIA", "802.3"), + GFP_ATOMIC); + + if (!skb) + return; + + /* Reserve space for TTP, LMP, and LAP header */ + skb_reserve(skb, self->client.max_header_size); + skb_put(skb, 2); + + frame = skb->data; + + /* Build frame */ + frame[0] = CMD_GET_MEDIA_CHAR; + frame[1] = 0x01; /* One parameter */ + + irlan_insert_string_param(skb, "MEDIA", "802.3"); + irlan_ctrl_data_request(self, skb); +} + +/* + * Function insert_byte_param (skb, param, value) + * + * Insert byte parameter into frame + * + */ +int irlan_insert_byte_param(struct sk_buff *skb, char *param, __u8 value) +{ + return __irlan_insert_param(skb, param, IRLAN_BYTE, value, 0, NULL, 0); +} + +int irlan_insert_short_param(struct sk_buff *skb, char *param, __u16 value) +{ + return __irlan_insert_param(skb, param, IRLAN_SHORT, 0, value, NULL, 0); +} + +/* + * Function insert_string (skb, param, value) + * + * Insert string parameter into frame + * + */ +int irlan_insert_string_param(struct sk_buff *skb, char *param, char *string) +{ + int string_len = strlen(string); + + return __irlan_insert_param(skb, param, IRLAN_ARRAY, 0, 0, string, + string_len); +} + +/* + * Function insert_array_param(skb, param, value, len_value) + * + * Insert array parameter into frame + * + */ +int irlan_insert_array_param(struct sk_buff *skb, char *name, __u8 *array, + __u16 array_len) +{ + return __irlan_insert_param(skb, name, IRLAN_ARRAY, 0, 0, array, + array_len); +} + +/* + * Function insert_param (skb, param, value, byte) + * + * Insert parameter at end of buffer, structure of a parameter is: + * + * ----------------------------------------------------------------------- + * | Name Length[1] | Param Name[1..255] | Val Length[2] | Value[0..1016]| + * ----------------------------------------------------------------------- + */ +static int __irlan_insert_param(struct sk_buff *skb, char *param, int type, + __u8 value_byte, __u16 value_short, + __u8 *value_array, __u16 value_len) +{ + __u8 *frame; + __u8 param_len; + __le16 tmp_le; /* Temporary value in little endian format */ + int n=0; + + if (skb == NULL) { + pr_debug("%s(), Got NULL skb\n", __func__); + return 0; + } + + param_len = strlen(param); + switch (type) { + case IRLAN_BYTE: + value_len = 1; + break; + case IRLAN_SHORT: + value_len = 2; + break; + case IRLAN_ARRAY: + IRDA_ASSERT(value_array != NULL, return 0;); + IRDA_ASSERT(value_len > 0, return 0;); + break; + default: + pr_debug("%s(), Unknown parameter type!\n", __func__); + return 0; + } + + /* Insert at end of sk-buffer */ + frame = skb_tail_pointer(skb); + + /* Make space for data */ + if (skb_tailroom(skb) < (param_len+value_len+3)) { + pr_debug("%s(), No more space at end of skb\n", __func__); + return 0; + } + skb_put(skb, param_len+value_len+3); + + /* Insert parameter length */ + frame[n++] = param_len; + + /* Insert parameter */ + memcpy(frame+n, param, param_len); n += param_len; + + /* Insert value length (2 byte little endian format, LSB first) */ + tmp_le = cpu_to_le16(value_len); + memcpy(frame+n, &tmp_le, 2); n += 2; /* To avoid alignment problems */ + + /* Insert value */ + switch (type) { + case IRLAN_BYTE: + frame[n++] = value_byte; + break; + case IRLAN_SHORT: + tmp_le = cpu_to_le16(value_short); + memcpy(frame+n, &tmp_le, 2); n += 2; + break; + case IRLAN_ARRAY: + memcpy(frame+n, value_array, value_len); n+=value_len; + break; + default: + break; + } + IRDA_ASSERT(n == (param_len+value_len+3), return 0;); + + return param_len+value_len+3; +} + +/* + * Function irlan_extract_param (buf, name, value, len) + * + * Extracts a single parameter name/value pair from buffer and updates + * the buffer pointer to point to the next name/value pair. + */ +int irlan_extract_param(__u8 *buf, char *name, char *value, __u16 *len) +{ + __u8 name_len; + __u16 val_len; + int n=0; + + /* get length of parameter name (1 byte) */ + name_len = buf[n++]; + + if (name_len > 254) { + pr_debug("%s(), name_len > 254\n", __func__); + return -RSP_INVALID_COMMAND_FORMAT; + } + + /* get parameter name */ + memcpy(name, buf+n, name_len); + name[name_len] = '\0'; + n+=name_len; + + /* + * Get length of parameter value (2 bytes in little endian + * format) + */ + memcpy(&val_len, buf+n, 2); /* To avoid alignment problems */ + le16_to_cpus(&val_len); n+=2; + + if (val_len >= 1016) { + pr_debug("%s(), parameter length to long\n", __func__); + return -RSP_INVALID_COMMAND_FORMAT; + } + *len = val_len; + + /* get parameter value */ + memcpy(value, buf+n, val_len); + value[val_len] = '\0'; + n+=val_len; + + pr_debug("Parameter: %s ", name); + pr_debug("Value: %s\n", value); + + return n; +} + +#ifdef CONFIG_PROC_FS + +/* + * Start of reading /proc entries. + * Return entry at pos, + * or start_token to indicate print header line + * or NULL if end of file + */ +static void *irlan_seq_start(struct seq_file *seq, loff_t *pos) +{ + rcu_read_lock(); + return seq_list_start_head(&irlans, *pos); +} + +/* Return entry after v, and increment pos */ +static void *irlan_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + return seq_list_next(v, &irlans, pos); +} + +/* End of reading /proc file */ +static void irlan_seq_stop(struct seq_file *seq, void *v) +{ + rcu_read_unlock(); +} + + +/* + * Show one entry in /proc file. + */ +static int irlan_seq_show(struct seq_file *seq, void *v) +{ + if (v == &irlans) + seq_puts(seq, "IrLAN instances:\n"); + else { + struct irlan_cb *self = list_entry(v, struct irlan_cb, dev_list); + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;); + + seq_printf(seq,"ifname: %s,\n", + self->dev->name); + seq_printf(seq,"client state: %s, ", + irlan_state[ self->client.state]); + seq_printf(seq,"provider state: %s,\n", + irlan_state[ self->provider.state]); + seq_printf(seq,"saddr: %#08x, ", + self->saddr); + seq_printf(seq,"daddr: %#08x\n", + self->daddr); + seq_printf(seq,"version: %d.%d,\n", + self->version[1], self->version[0]); + seq_printf(seq,"access type: %s\n", + irlan_access[self->client.access_type]); + seq_printf(seq,"media: %s\n", + irlan_media[self->media]); + + seq_printf(seq,"local filter:\n"); + seq_printf(seq,"remote filter: "); + irlan_print_filter(seq, self->client.filter_type); + seq_printf(seq,"tx busy: %s\n", + netif_queue_stopped(self->dev) ? "TRUE" : "FALSE"); + + seq_putc(seq,'\n'); + } + return 0; +} + +static const struct seq_operations irlan_seq_ops = { + .start = irlan_seq_start, + .next = irlan_seq_next, + .stop = irlan_seq_stop, + .show = irlan_seq_show, +}; + +static int irlan_seq_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &irlan_seq_ops); +} +#endif + +MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>"); +MODULE_DESCRIPTION("The Linux IrDA LAN protocol"); +MODULE_LICENSE("GPL"); + +module_param(eth, bool, 0); +MODULE_PARM_DESC(eth, "Name devices ethX (0) or irlanX (1)"); +module_param(access, int, 0); +MODULE_PARM_DESC(access, "Access type DIRECT=1, PEER=2, HOSTED=3"); + +module_init(irlan_init); +module_exit(irlan_cleanup); + diff --git a/kernel/net/irda/irlan/irlan_eth.c b/kernel/net/irda/irlan/irlan_eth.c new file mode 100644 index 000000000..fcfbe5794 --- /dev/null +++ b/kernel/net/irda/irlan/irlan_eth.c @@ -0,0 +1,340 @@ +/********************************************************************* + * + * Filename: irlan_eth.c + * Version: + * Description: + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Thu Oct 15 08:37:58 1998 + * Modified at: Tue Mar 21 09:06:41 2000 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * Sources: skeleton.c by Donald Becker <becker@CESDIS.gsfc.nasa.gov> + * slip.c by Laurence Culhane, <loz@holmes.demon.co.uk> + * Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> + * + * Copyright (c) 1998-2000 Dag Brattli, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/inetdevice.h> +#include <linux/if_arp.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <net/arp.h> + +#include <net/irda/irda.h> +#include <net/irda/irmod.h> +#include <net/irda/irlan_common.h> +#include <net/irda/irlan_client.h> +#include <net/irda/irlan_event.h> +#include <net/irda/irlan_eth.h> + +static int irlan_eth_open(struct net_device *dev); +static int irlan_eth_close(struct net_device *dev); +static netdev_tx_t irlan_eth_xmit(struct sk_buff *skb, + struct net_device *dev); +static void irlan_eth_set_multicast_list(struct net_device *dev); + +static const struct net_device_ops irlan_eth_netdev_ops = { + .ndo_open = irlan_eth_open, + .ndo_stop = irlan_eth_close, + .ndo_start_xmit = irlan_eth_xmit, + .ndo_set_rx_mode = irlan_eth_set_multicast_list, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, +}; + +/* + * Function irlan_eth_setup (dev) + * + * The network device initialization function. + * + */ +static void irlan_eth_setup(struct net_device *dev) +{ + ether_setup(dev); + + dev->netdev_ops = &irlan_eth_netdev_ops; + dev->destructor = free_netdev; + + + /* + * Lets do all queueing in IrTTP instead of this device driver. + * Queueing here as well can introduce some strange latency + * problems, which we will avoid by setting the queue size to 0. + */ + /* + * The bugs in IrTTP and IrLAN that created this latency issue + * have now been fixed, and we can propagate flow control properly + * to the network layer. However, this requires a minimal queue of + * packets for the device. + * Without flow control, the Tx Queue is 14 (ttp) + 0 (dev) = 14 + * With flow control, the Tx Queue is 7 (ttp) + 4 (dev) = 11 + * See irlan_eth_flow_indication()... + * Note : this number was randomly selected and would need to + * be adjusted. + * Jean II */ + dev->tx_queue_len = 4; +} + +/* + * Function alloc_irlandev + * + * Allocate network device and control block + * + */ +struct net_device *alloc_irlandev(const char *name) +{ + return alloc_netdev(sizeof(struct irlan_cb), name, NET_NAME_UNKNOWN, + irlan_eth_setup); +} + +/* + * Function irlan_eth_open (dev) + * + * Network device has been opened by user + * + */ +static int irlan_eth_open(struct net_device *dev) +{ + struct irlan_cb *self = netdev_priv(dev); + + /* Ready to play! */ + netif_stop_queue(dev); /* Wait until data link is ready */ + + /* We are now open, so time to do some work */ + self->disconnect_reason = 0; + irlan_client_wakeup(self, self->saddr, self->daddr); + + /* Make sure we have a hardware address before we return, + so DHCP clients gets happy */ + return wait_event_interruptible(self->open_wait, + !self->tsap_data->connected); +} + +/* + * Function irlan_eth_close (dev) + * + * Stop the ether network device, his function will usually be called by + * ifconfig down. We should now disconnect the link, We start the + * close timer, so that the instance will be removed if we are unable + * to discover the remote device after the disconnect. + */ +static int irlan_eth_close(struct net_device *dev) +{ + struct irlan_cb *self = netdev_priv(dev); + + /* Stop device */ + netif_stop_queue(dev); + + irlan_close_data_channel(self); + irlan_close_tsaps(self); + + irlan_do_client_event(self, IRLAN_LMP_DISCONNECT, NULL); + irlan_do_provider_event(self, IRLAN_LMP_DISCONNECT, NULL); + + /* Remove frames queued on the control channel */ + skb_queue_purge(&self->client.txq); + + self->client.tx_busy = 0; + + return 0; +} + +/* + * Function irlan_eth_tx (skb) + * + * Transmits ethernet frames over IrDA link. + * + */ +static netdev_tx_t irlan_eth_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct irlan_cb *self = netdev_priv(dev); + int ret; + unsigned int len; + + /* skb headroom large enough to contain all IrDA-headers? */ + if ((skb_headroom(skb) < self->max_header_size) || (skb_shared(skb))) { + struct sk_buff *new_skb = + skb_realloc_headroom(skb, self->max_header_size); + + /* We have to free the original skb anyway */ + dev_kfree_skb(skb); + + /* Did the realloc succeed? */ + if (new_skb == NULL) + return NETDEV_TX_OK; + + /* Use the new skb instead */ + skb = new_skb; + } + + dev->trans_start = jiffies; + + len = skb->len; + /* Now queue the packet in the transport layer */ + if (self->use_udata) + ret = irttp_udata_request(self->tsap_data, skb); + else + ret = irttp_data_request(self->tsap_data, skb); + + if (ret < 0) { + /* + * IrTTPs tx queue is full, so we just have to + * drop the frame! You might think that we should + * just return -1 and don't deallocate the frame, + * but that is dangerous since it's possible that + * we have replaced the original skb with a new + * one with larger headroom, and that would really + * confuse do_dev_queue_xmit() in dev.c! I have + * tried :-) DB + */ + /* irttp_data_request already free the packet */ + dev->stats.tx_dropped++; + } else { + dev->stats.tx_packets++; + dev->stats.tx_bytes += len; + } + + return NETDEV_TX_OK; +} + +/* + * Function irlan_eth_receive (handle, skb) + * + * This function gets the data that is received on the data channel + * + */ +int irlan_eth_receive(void *instance, void *sap, struct sk_buff *skb) +{ + struct irlan_cb *self = instance; + struct net_device *dev = self->dev; + + if (skb == NULL) { + dev->stats.rx_dropped++; + return 0; + } + if (skb->len < ETH_HLEN) { + pr_debug("%s() : IrLAN frame too short (%d)\n", + __func__, skb->len); + dev->stats.rx_dropped++; + dev_kfree_skb(skb); + return 0; + } + + /* + * Adopt this frame! Important to set all these fields since they + * might have been previously set by the low level IrDA network + * device driver + */ + skb->protocol = eth_type_trans(skb, dev); /* Remove eth header */ + + dev->stats.rx_packets++; + dev->stats.rx_bytes += skb->len; + + netif_rx(skb); /* Eat it! */ + + return 0; +} + +/* + * Function irlan_eth_flow (status) + * + * Do flow control between IP/Ethernet and IrLAN/IrTTP. This is done by + * controlling the queue stop/start. + * + * The IrDA link layer has the advantage to have flow control, and + * IrTTP now properly handles that. Flow controlling the higher layers + * prevent us to drop Tx packets in here (up to 15% for a TCP socket, + * more for UDP socket). + * Also, this allow us to reduce the overall transmit queue, which means + * less latency in case of mixed traffic. + * Jean II + */ +void irlan_eth_flow_indication(void *instance, void *sap, LOCAL_FLOW flow) +{ + struct irlan_cb *self; + struct net_device *dev; + + self = instance; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + dev = self->dev; + + IRDA_ASSERT(dev != NULL, return;); + + pr_debug("%s() : flow %s ; running %d\n", __func__, + flow == FLOW_STOP ? "FLOW_STOP" : "FLOW_START", + netif_running(dev)); + + switch (flow) { + case FLOW_STOP: + /* IrTTP is full, stop higher layers */ + netif_stop_queue(dev); + break; + case FLOW_START: + default: + /* Tell upper layers that its time to transmit frames again */ + /* Schedule network layer */ + netif_wake_queue(dev); + break; + } +} + +/* + * Function set_multicast_list (dev) + * + * Configure the filtering of the device + * + */ +#define HW_MAX_ADDRS 4 /* Must query to get it! */ +static void irlan_eth_set_multicast_list(struct net_device *dev) +{ + struct irlan_cb *self = netdev_priv(dev); + + /* Check if data channel has been connected yet */ + if (self->client.state != IRLAN_DATA) { + pr_debug("%s(), delaying!\n", __func__); + return; + } + + if (dev->flags & IFF_PROMISC) { + /* Enable promiscuous mode */ + net_warn_ratelimited("Promiscuous mode not implemented by IrLAN!\n"); + } else if ((dev->flags & IFF_ALLMULTI) || + netdev_mc_count(dev) > HW_MAX_ADDRS) { + /* Disable promiscuous mode, use normal mode. */ + pr_debug("%s(), Setting multicast filter\n", __func__); + /* hardware_set_filter(NULL); */ + + irlan_set_multicast_filter(self, TRUE); + } else if (!netdev_mc_empty(dev)) { + pr_debug("%s(), Setting multicast filter\n", __func__); + /* Walk the address list, and load the filter */ + /* hardware_set_filter(dev->mc_list); */ + + irlan_set_multicast_filter(self, TRUE); + } else { + pr_debug("%s(), Clearing multicast filter\n", __func__); + irlan_set_multicast_filter(self, FALSE); + } + + if (dev->flags & IFF_BROADCAST) + irlan_set_broadcast_filter(self, TRUE); + else + irlan_set_broadcast_filter(self, FALSE); +} diff --git a/kernel/net/irda/irlan/irlan_event.c b/kernel/net/irda/irlan/irlan_event.c new file mode 100644 index 000000000..9a1cc11c1 --- /dev/null +++ b/kernel/net/irda/irlan/irlan_event.c @@ -0,0 +1,60 @@ +/********************************************************************* + * + * Filename: irlan_event.c + * Version: + * Description: + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Tue Oct 20 09:10:16 1998 + * Modified at: Sat Oct 30 12:59:01 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <net/irda/irlan_event.h> + +const char * const irlan_state[] = { + "IRLAN_IDLE", + "IRLAN_QUERY", + "IRLAN_CONN", + "IRLAN_INFO", + "IRLAN_MEDIA", + "IRLAN_OPEN", + "IRLAN_WAIT", + "IRLAN_ARB", + "IRLAN_DATA", + "IRLAN_CLOSE", + "IRLAN_SYNC", +}; + +void irlan_next_client_state(struct irlan_cb *self, IRLAN_STATE state) +{ + pr_debug("%s(), %s\n", __func__ , irlan_state[state]); + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + self->client.state = state; +} + +void irlan_next_provider_state(struct irlan_cb *self, IRLAN_STATE state) +{ + pr_debug("%s(), %s\n", __func__ , irlan_state[state]); + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + self->provider.state = state; +} + diff --git a/kernel/net/irda/irlan/irlan_filter.c b/kernel/net/irda/irlan/irlan_filter.c new file mode 100644 index 000000000..e755e90b2 --- /dev/null +++ b/kernel/net/irda/irlan/irlan_filter.c @@ -0,0 +1,240 @@ +/********************************************************************* + * + * Filename: irlan_filter.c + * Version: + * Description: + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Fri Jan 29 11:16:38 1999 + * Modified at: Sat Oct 30 12:58:45 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/skbuff.h> +#include <linux/random.h> +#include <linux/seq_file.h> + +#include <net/irda/irlan_common.h> +#include <net/irda/irlan_filter.h> + +/* + * Function irlan_filter_request (self, skb) + * + * Handle filter request from client peer device + * + */ +void irlan_filter_request(struct irlan_cb *self, struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + if ((self->provider.filter_type == IRLAN_DIRECTED) && + (self->provider.filter_operation == DYNAMIC)) + { + pr_debug("Giving peer a dynamic Ethernet address\n"); + self->provider.mac_address[0] = 0x40; + self->provider.mac_address[1] = 0x00; + self->provider.mac_address[2] = 0x00; + self->provider.mac_address[3] = 0x00; + + /* Use arbitration value to generate MAC address */ + if (self->provider.access_type == ACCESS_PEER) { + self->provider.mac_address[4] = + self->provider.send_arb_val & 0xff; + self->provider.mac_address[5] = + (self->provider.send_arb_val >> 8) & 0xff; + } else { + /* Just generate something for now */ + get_random_bytes(self->provider.mac_address+4, 1); + get_random_bytes(self->provider.mac_address+5, 1); + } + + skb->data[0] = 0x00; /* Success */ + skb->data[1] = 0x03; + irlan_insert_string_param(skb, "FILTER_MODE", "NONE"); + irlan_insert_short_param(skb, "MAX_ENTRY", 0x0001); + irlan_insert_array_param(skb, "FILTER_ENTRY", + self->provider.mac_address, 6); + return; + } + + if ((self->provider.filter_type == IRLAN_DIRECTED) && + (self->provider.filter_mode == FILTER)) + { + pr_debug("Directed filter on\n"); + skb->data[0] = 0x00; /* Success */ + skb->data[1] = 0x00; + return; + } + if ((self->provider.filter_type == IRLAN_DIRECTED) && + (self->provider.filter_mode == NONE)) + { + pr_debug("Directed filter off\n"); + skb->data[0] = 0x00; /* Success */ + skb->data[1] = 0x00; + return; + } + + if ((self->provider.filter_type == IRLAN_BROADCAST) && + (self->provider.filter_mode == FILTER)) + { + pr_debug("Broadcast filter on\n"); + skb->data[0] = 0x00; /* Success */ + skb->data[1] = 0x00; + return; + } + if ((self->provider.filter_type == IRLAN_BROADCAST) && + (self->provider.filter_mode == NONE)) + { + pr_debug("Broadcast filter off\n"); + skb->data[0] = 0x00; /* Success */ + skb->data[1] = 0x00; + return; + } + if ((self->provider.filter_type == IRLAN_MULTICAST) && + (self->provider.filter_mode == FILTER)) + { + pr_debug("Multicast filter on\n"); + skb->data[0] = 0x00; /* Success */ + skb->data[1] = 0x00; + return; + } + if ((self->provider.filter_type == IRLAN_MULTICAST) && + (self->provider.filter_mode == NONE)) + { + pr_debug("Multicast filter off\n"); + skb->data[0] = 0x00; /* Success */ + skb->data[1] = 0x00; + return; + } + if ((self->provider.filter_type == IRLAN_MULTICAST) && + (self->provider.filter_operation == GET)) + { + pr_debug("Multicast filter get\n"); + skb->data[0] = 0x00; /* Success? */ + skb->data[1] = 0x02; + irlan_insert_string_param(skb, "FILTER_MODE", "NONE"); + irlan_insert_short_param(skb, "MAX_ENTRY", 16); + return; + } + skb->data[0] = 0x00; /* Command not supported */ + skb->data[1] = 0x00; + + pr_debug("Not implemented!\n"); +} + +/* + * Function check_request_param (self, param, value) + * + * Check parameters in request from peer device + * + */ +void irlan_check_command_param(struct irlan_cb *self, char *param, char *value) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + pr_debug("%s, %s\n", param, value); + + /* + * This is experimental!! DB. + */ + if (strcmp(param, "MODE") == 0) { + self->use_udata = TRUE; + return; + } + + /* + * FILTER_TYPE + */ + if (strcmp(param, "FILTER_TYPE") == 0) { + if (strcmp(value, "DIRECTED") == 0) { + self->provider.filter_type = IRLAN_DIRECTED; + return; + } + if (strcmp(value, "MULTICAST") == 0) { + self->provider.filter_type = IRLAN_MULTICAST; + return; + } + if (strcmp(value, "BROADCAST") == 0) { + self->provider.filter_type = IRLAN_BROADCAST; + return; + } + } + /* + * FILTER_MODE + */ + if (strcmp(param, "FILTER_MODE") == 0) { + if (strcmp(value, "ALL") == 0) { + self->provider.filter_mode = ALL; + return; + } + if (strcmp(value, "FILTER") == 0) { + self->provider.filter_mode = FILTER; + return; + } + if (strcmp(value, "NONE") == 0) { + self->provider.filter_mode = FILTER; + return; + } + } + /* + * FILTER_OPERATION + */ + if (strcmp(param, "FILTER_OPERATION") == 0) { + if (strcmp(value, "DYNAMIC") == 0) { + self->provider.filter_operation = DYNAMIC; + return; + } + if (strcmp(value, "GET") == 0) { + self->provider.filter_operation = GET; + return; + } + } +} + +/* + * Function irlan_print_filter (filter_type, buf) + * + * Print status of filter. Used by /proc file system + * + */ +#ifdef CONFIG_PROC_FS +#define MASK2STR(m,s) { .mask = m, .str = s } + +void irlan_print_filter(struct seq_file *seq, int filter_type) +{ + static struct { + int mask; + const char *str; + } filter_mask2str[] = { + MASK2STR(IRLAN_DIRECTED, "DIRECTED"), + MASK2STR(IRLAN_FUNCTIONAL, "FUNCTIONAL"), + MASK2STR(IRLAN_GROUP, "GROUP"), + MASK2STR(IRLAN_MAC_FRAME, "MAC_FRAME"), + MASK2STR(IRLAN_MULTICAST, "MULTICAST"), + MASK2STR(IRLAN_BROADCAST, "BROADCAST"), + MASK2STR(IRLAN_IPX_SOCKET, "IPX_SOCKET"), + MASK2STR(0, NULL) + }, *p; + + for (p = filter_mask2str; p->str; p++) { + if (filter_type & p->mask) + seq_printf(seq, "%s ", p->str); + } + seq_putc(seq, '\n'); +} +#undef MASK2STR +#endif diff --git a/kernel/net/irda/irlan/irlan_provider.c b/kernel/net/irda/irlan/irlan_provider.c new file mode 100644 index 000000000..15c292cf2 --- /dev/null +++ b/kernel/net/irda/irlan/irlan_provider.c @@ -0,0 +1,408 @@ +/********************************************************************* + * + * Filename: irlan_provider.c + * Version: 0.9 + * Description: IrDA LAN Access Protocol Implementation + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Sun Aug 31 20:14:37 1997 + * Modified at: Sat Oct 30 12:52:10 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * Sources: skeleton.c by Donald Becker <becker@CESDIS.gsfc.nasa.gov> + * slip.c by Laurence Culhane, <loz@holmes.demon.co.uk> + * Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> + * + * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/init.h> +#include <linux/random.h> +#include <linux/bitops.h> +#include <linux/slab.h> + +#include <asm/byteorder.h> + +#include <net/irda/irda.h> +#include <net/irda/irttp.h> +#include <net/irda/irlmp.h> +#include <net/irda/irias_object.h> +#include <net/irda/iriap.h> +#include <net/irda/timer.h> + +#include <net/irda/irlan_common.h> +#include <net/irda/irlan_eth.h> +#include <net/irda/irlan_event.h> +#include <net/irda/irlan_provider.h> +#include <net/irda/irlan_filter.h> +#include <net/irda/irlan_client.h> + +static void irlan_provider_connect_indication(void *instance, void *sap, + struct qos_info *qos, + __u32 max_sdu_size, + __u8 max_header_size, + struct sk_buff *skb); + +/* + * Function irlan_provider_control_data_indication (handle, skb) + * + * This function gets the data that is received on the control channel + * + */ +static int irlan_provider_data_indication(void *instance, void *sap, + struct sk_buff *skb) +{ + struct irlan_cb *self; + __u8 code; + + self = instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;); + + IRDA_ASSERT(skb != NULL, return -1;); + + code = skb->data[0]; + switch(code) { + case CMD_GET_PROVIDER_INFO: + pr_debug("Got GET_PROVIDER_INFO command!\n"); + irlan_do_provider_event(self, IRLAN_GET_INFO_CMD, skb); + break; + + case CMD_GET_MEDIA_CHAR: + pr_debug("Got GET_MEDIA_CHAR command!\n"); + irlan_do_provider_event(self, IRLAN_GET_MEDIA_CMD, skb); + break; + case CMD_OPEN_DATA_CHANNEL: + pr_debug("Got OPEN_DATA_CHANNEL command!\n"); + irlan_do_provider_event(self, IRLAN_OPEN_DATA_CMD, skb); + break; + case CMD_FILTER_OPERATION: + pr_debug("Got FILTER_OPERATION command!\n"); + irlan_do_provider_event(self, IRLAN_FILTER_CONFIG_CMD, skb); + break; + case CMD_RECONNECT_DATA_CHAN: + pr_debug("%s(), Got RECONNECT_DATA_CHAN command\n", __func__); + pr_debug("%s(), NOT IMPLEMENTED\n", __func__); + break; + case CMD_CLOSE_DATA_CHAN: + pr_debug("Got CLOSE_DATA_CHAN command!\n"); + pr_debug("%s(), NOT IMPLEMENTED\n", __func__); + break; + default: + pr_debug("%s(), Unknown command!\n", __func__); + break; + } + return 0; +} + +/* + * Function irlan_provider_connect_indication (handle, skb, priv) + * + * Got connection from peer IrLAN client + * + */ +static void irlan_provider_connect_indication(void *instance, void *sap, + struct qos_info *qos, + __u32 max_sdu_size, + __u8 max_header_size, + struct sk_buff *skb) +{ + struct irlan_cb *self; + struct tsap_cb *tsap; + + self = instance; + tsap = sap; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + IRDA_ASSERT(tsap == self->provider.tsap_ctrl,return;); + IRDA_ASSERT(self->provider.state == IRLAN_IDLE, return;); + + self->provider.max_sdu_size = max_sdu_size; + self->provider.max_header_size = max_header_size; + + irlan_do_provider_event(self, IRLAN_CONNECT_INDICATION, NULL); + + /* + * If we are in peer mode, the client may not have got the discovery + * indication it needs to make progress. If the client is still in + * IDLE state, we must kick it. + */ + if ((self->provider.access_type == ACCESS_PEER) && + (self->client.state == IRLAN_IDLE)) + { + irlan_client_wakeup(self, self->saddr, self->daddr); + } +} + +/* + * Function irlan_provider_connect_response (handle) + * + * Accept incoming connection + * + */ +void irlan_provider_connect_response(struct irlan_cb *self, + struct tsap_cb *tsap) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + /* Just accept */ + irttp_connect_response(tsap, IRLAN_MTU, NULL); +} + +static void irlan_provider_disconnect_indication(void *instance, void *sap, + LM_REASON reason, + struct sk_buff *userdata) +{ + struct irlan_cb *self; + struct tsap_cb *tsap; + + pr_debug("%s(), reason=%d\n", __func__ , reason); + + self = instance; + tsap = sap; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + IRDA_ASSERT(tsap != NULL, return;); + IRDA_ASSERT(tsap->magic == TTP_TSAP_MAGIC, return;); + + IRDA_ASSERT(tsap == self->provider.tsap_ctrl, return;); + + irlan_do_provider_event(self, IRLAN_LMP_DISCONNECT, NULL); +} + +/* + * Function irlan_parse_open_data_cmd (self, skb) + * + * + * + */ +int irlan_parse_open_data_cmd(struct irlan_cb *self, struct sk_buff *skb) +{ + int ret; + + ret = irlan_provider_parse_command(self, CMD_OPEN_DATA_CHANNEL, skb); + + /* Open data channel */ + irlan_open_data_tsap(self); + + return ret; +} + +/* + * Function parse_command (skb) + * + * Extract all parameters from received buffer, then feed them to + * check_params for parsing + * + */ +int irlan_provider_parse_command(struct irlan_cb *self, int cmd, + struct sk_buff *skb) +{ + __u8 *frame; + __u8 *ptr; + int count; + __u16 val_len; + int i; + char *name; + char *value; + int ret = RSP_SUCCESS; + + IRDA_ASSERT(skb != NULL, return -RSP_PROTOCOL_ERROR;); + + pr_debug("%s(), skb->len=%d\n", __func__ , (int)skb->len); + + IRDA_ASSERT(self != NULL, return -RSP_PROTOCOL_ERROR;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -RSP_PROTOCOL_ERROR;); + + if (!skb) + return -RSP_PROTOCOL_ERROR; + + frame = skb->data; + + name = kmalloc(255, GFP_ATOMIC); + if (!name) + return -RSP_INSUFFICIENT_RESOURCES; + value = kmalloc(1016, GFP_ATOMIC); + if (!value) { + kfree(name); + return -RSP_INSUFFICIENT_RESOURCES; + } + + /* How many parameters? */ + count = frame[1]; + + pr_debug("Got %d parameters\n", count); + + ptr = frame+2; + + /* For all parameters */ + for (i=0; i<count;i++) { + ret = irlan_extract_param(ptr, name, value, &val_len); + if (ret < 0) { + pr_debug("%s(), IrLAN, Error!\n", __func__); + break; + } + ptr+=ret; + ret = RSP_SUCCESS; + irlan_check_command_param(self, name, value); + } + /* Cleanup */ + kfree(name); + kfree(value); + + return ret; +} + +/* + * Function irlan_provider_send_reply (self, info) + * + * Send reply to query to peer IrLAN layer + * + */ +void irlan_provider_send_reply(struct irlan_cb *self, int command, + int ret_code) +{ + struct sk_buff *skb; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return;); + + skb = alloc_skb(IRLAN_MAX_HEADER + IRLAN_CMD_HEADER + + /* Bigger param length comes from CMD_GET_MEDIA_CHAR */ + IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "DIRECTED") + + IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "BROADCAST") + + IRLAN_STRING_PARAMETER_LEN("FILTER_TYPE", "MULTICAST") + + IRLAN_STRING_PARAMETER_LEN("ACCESS_TYPE", "HOSTED"), + GFP_ATOMIC); + + if (!skb) + return; + + /* Reserve space for TTP, LMP, and LAP header */ + skb_reserve(skb, self->provider.max_header_size); + skb_put(skb, 2); + + switch (command) { + case CMD_GET_PROVIDER_INFO: + skb->data[0] = 0x00; /* Success */ + skb->data[1] = 0x02; /* 2 parameters */ + switch (self->media) { + case MEDIA_802_3: + irlan_insert_string_param(skb, "MEDIA", "802.3"); + break; + case MEDIA_802_5: + irlan_insert_string_param(skb, "MEDIA", "802.5"); + break; + default: + pr_debug("%s(), unknown media type!\n", __func__); + break; + } + irlan_insert_short_param(skb, "IRLAN_VER", 0x0101); + break; + + case CMD_GET_MEDIA_CHAR: + skb->data[0] = 0x00; /* Success */ + skb->data[1] = 0x05; /* 5 parameters */ + irlan_insert_string_param(skb, "FILTER_TYPE", "DIRECTED"); + irlan_insert_string_param(skb, "FILTER_TYPE", "BROADCAST"); + irlan_insert_string_param(skb, "FILTER_TYPE", "MULTICAST"); + + switch (self->provider.access_type) { + case ACCESS_DIRECT: + irlan_insert_string_param(skb, "ACCESS_TYPE", "DIRECT"); + break; + case ACCESS_PEER: + irlan_insert_string_param(skb, "ACCESS_TYPE", "PEER"); + break; + case ACCESS_HOSTED: + irlan_insert_string_param(skb, "ACCESS_TYPE", "HOSTED"); + break; + default: + pr_debug("%s(), Unknown access type\n", __func__); + break; + } + irlan_insert_short_param(skb, "MAX_FRAME", 0x05ee); + break; + case CMD_OPEN_DATA_CHANNEL: + skb->data[0] = 0x00; /* Success */ + if (self->provider.send_arb_val) { + skb->data[1] = 0x03; /* 3 parameters */ + irlan_insert_short_param(skb, "CON_ARB", + self->provider.send_arb_val); + } else + skb->data[1] = 0x02; /* 2 parameters */ + irlan_insert_byte_param(skb, "DATA_CHAN", self->stsap_sel_data); + irlan_insert_string_param(skb, "RECONNECT_KEY", "LINUX RULES!"); + break; + case CMD_FILTER_OPERATION: + irlan_filter_request(self, skb); + break; + default: + pr_debug("%s(), Unknown command!\n", __func__); + break; + } + + irttp_data_request(self->provider.tsap_ctrl, skb); +} + +/* + * Function irlan_provider_register(void) + * + * Register provider support so we can accept incoming connections. + * + */ +int irlan_provider_open_ctrl_tsap(struct irlan_cb *self) +{ + struct tsap_cb *tsap; + notify_t notify; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;); + + /* Check if already open */ + if (self->provider.tsap_ctrl) + return -1; + + /* + * First register well known control TSAP + */ + irda_notify_init(¬ify); + notify.data_indication = irlan_provider_data_indication; + notify.connect_indication = irlan_provider_connect_indication; + notify.disconnect_indication = irlan_provider_disconnect_indication; + notify.instance = self; + strlcpy(notify.name, "IrLAN ctrl (p)", sizeof(notify.name)); + + tsap = irttp_open_tsap(LSAP_ANY, 1, ¬ify); + if (!tsap) { + pr_debug("%s(), Got no tsap!\n", __func__); + return -1; + } + self->provider.tsap_ctrl = tsap; + + /* Register with LM-IAS */ + irlan_ias_register(self, tsap->stsap_sel); + + return 0; +} + diff --git a/kernel/net/irda/irlan/irlan_provider_event.c b/kernel/net/irda/irlan/irlan_provider_event.c new file mode 100644 index 000000000..9c4f7f51d --- /dev/null +++ b/kernel/net/irda/irlan/irlan_provider_event.c @@ -0,0 +1,233 @@ +/********************************************************************* + * + * Filename: irlan_provider_event.c + * Version: 0.9 + * Description: IrLAN provider state machine) + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Sun Aug 31 20:14:37 1997 + * Modified at: Sat Oct 30 12:52:41 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <net/irda/irda.h> +#include <net/irda/iriap.h> +#include <net/irda/irlmp.h> +#include <net/irda/irttp.h> + +#include <net/irda/irlan_provider.h> +#include <net/irda/irlan_event.h> + +static int irlan_provider_state_idle(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb); +static int irlan_provider_state_info(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb); +static int irlan_provider_state_open(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb); +static int irlan_provider_state_data(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb); + +static int (*state[])(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb) = +{ + irlan_provider_state_idle, + NULL, /* Query */ + NULL, /* Info */ + irlan_provider_state_info, + NULL, /* Media */ + irlan_provider_state_open, + NULL, /* Wait */ + NULL, /* Arb */ + irlan_provider_state_data, + NULL, /* Close */ + NULL, /* Sync */ +}; + +void irlan_do_provider_event(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(*state[ self->provider.state] != NULL, return;); + + (*state[self->provider.state]) (self, event, skb); +} + +/* + * Function irlan_provider_state_idle (event, skb, info) + * + * IDLE, We are waiting for an indication that there is a provider + * available. + */ +static int irlan_provider_state_idle(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return -1;); + + switch(event) { + case IRLAN_CONNECT_INDICATION: + irlan_provider_connect_response( self, self->provider.tsap_ctrl); + irlan_next_provider_state( self, IRLAN_INFO); + break; + default: + pr_debug("%s(), Unknown event %d\n", __func__ , event); + break; + } + if (skb) + dev_kfree_skb(skb); + + return 0; +} + +/* + * Function irlan_provider_state_info (self, event, skb, info) + * + * INFO, We have issued a GetInfo command and is awaiting a reply. + */ +static int irlan_provider_state_info(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb) +{ + int ret; + + IRDA_ASSERT(self != NULL, return -1;); + + switch(event) { + case IRLAN_GET_INFO_CMD: + /* Be sure to use 802.3 in case of peer mode */ + if (self->provider.access_type == ACCESS_PEER) { + self->media = MEDIA_802_3; + + /* Check if client has started yet */ + if (self->client.state == IRLAN_IDLE) { + /* This should get the client going */ + irlmp_discovery_request(8); + } + } + + irlan_provider_send_reply(self, CMD_GET_PROVIDER_INFO, + RSP_SUCCESS); + /* Keep state */ + break; + case IRLAN_GET_MEDIA_CMD: + irlan_provider_send_reply(self, CMD_GET_MEDIA_CHAR, + RSP_SUCCESS); + /* Keep state */ + break; + case IRLAN_OPEN_DATA_CMD: + ret = irlan_parse_open_data_cmd(self, skb); + if (self->provider.access_type == ACCESS_PEER) { + /* FIXME: make use of random functions! */ + self->provider.send_arb_val = (jiffies & 0xffff); + } + irlan_provider_send_reply(self, CMD_OPEN_DATA_CHANNEL, ret); + + if (ret == RSP_SUCCESS) { + irlan_next_provider_state(self, IRLAN_OPEN); + + /* Signal client that we are now open */ + irlan_do_client_event(self, IRLAN_PROVIDER_SIGNAL, NULL); + } + break; + case IRLAN_LMP_DISCONNECT: /* FALLTHROUGH */ + case IRLAN_LAP_DISCONNECT: + irlan_next_provider_state(self, IRLAN_IDLE); + break; + default: + pr_debug("%s(), Unknown event %d\n", __func__ , event); + break; + } + if (skb) + dev_kfree_skb(skb); + + return 0; +} + +/* + * Function irlan_provider_state_open (self, event, skb, info) + * + * OPEN, The client has issued a OpenData command and is awaiting a + * reply + * + */ +static int irlan_provider_state_open(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return -1;); + + switch(event) { + case IRLAN_FILTER_CONFIG_CMD: + irlan_provider_parse_command(self, CMD_FILTER_OPERATION, skb); + irlan_provider_send_reply(self, CMD_FILTER_OPERATION, + RSP_SUCCESS); + /* Keep state */ + break; + case IRLAN_DATA_CONNECT_INDICATION: + irlan_next_provider_state(self, IRLAN_DATA); + irlan_provider_connect_response(self, self->tsap_data); + break; + case IRLAN_LMP_DISCONNECT: /* FALLTHROUGH */ + case IRLAN_LAP_DISCONNECT: + irlan_next_provider_state(self, IRLAN_IDLE); + break; + default: + pr_debug("%s(), Unknown event %d\n", __func__ , event); + break; + } + if (skb) + dev_kfree_skb(skb); + + return 0; +} + +/* + * Function irlan_provider_state_data (self, event, skb, info) + * + * DATA, The data channel is connected, allowing data transfers between + * the local and remote machines. + * + */ +static int irlan_provider_state_data(struct irlan_cb *self, IRLAN_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == IRLAN_MAGIC, return -1;); + + switch(event) { + case IRLAN_FILTER_CONFIG_CMD: + irlan_provider_parse_command(self, CMD_FILTER_OPERATION, skb); + irlan_provider_send_reply(self, CMD_FILTER_OPERATION, + RSP_SUCCESS); + break; + case IRLAN_LMP_DISCONNECT: /* FALLTHROUGH */ + case IRLAN_LAP_DISCONNECT: + irlan_next_provider_state(self, IRLAN_IDLE); + break; + default: + pr_debug("%s(), Unknown event %d\n", __func__ , event); + break; + } + if (skb) + dev_kfree_skb(skb); + + return 0; +} + + + + + + + + + + diff --git a/kernel/net/irda/irlap.c b/kernel/net/irda/irlap.c new file mode 100644 index 000000000..1cde711bc --- /dev/null +++ b/kernel/net/irda/irlap.c @@ -0,0 +1,1207 @@ +/********************************************************************* + * + * Filename: irlap.c + * Version: 1.0 + * Description: IrLAP implementation for Linux + * Status: Stable + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Mon Aug 4 20:40:53 1997 + * Modified at: Tue Dec 14 09:26:44 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved. + * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + ********************************************************************/ + +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/skbuff.h> +#include <linux/delay.h> +#include <linux/proc_fs.h> +#include <linux/init.h> +#include <linux/random.h> +#include <linux/module.h> +#include <linux/seq_file.h> + +#include <net/irda/irda.h> +#include <net/irda/irda_device.h> +#include <net/irda/irqueue.h> +#include <net/irda/irlmp.h> +#include <net/irda/irlmp_frame.h> +#include <net/irda/irlap_frame.h> +#include <net/irda/irlap.h> +#include <net/irda/timer.h> +#include <net/irda/qos.h> + +static hashbin_t *irlap = NULL; +int sysctl_slot_timeout = SLOT_TIMEOUT * 1000 / HZ; + +/* This is the delay of missed pf period before generating an event + * to the application. The spec mandate 3 seconds, but in some cases + * it's way too long. - Jean II */ +int sysctl_warn_noreply_time = 3; + +extern void irlap_queue_xmit(struct irlap_cb *self, struct sk_buff *skb); +static void __irlap_close(struct irlap_cb *self); +static void irlap_init_qos_capabilities(struct irlap_cb *self, + struct qos_info *qos_user); + +static const char *const lap_reasons[] __maybe_unused = { + "ERROR, NOT USED", + "LAP_DISC_INDICATION", + "LAP_NO_RESPONSE", + "LAP_RESET_INDICATION", + "LAP_FOUND_NONE", + "LAP_MEDIA_BUSY", + "LAP_PRIMARY_CONFLICT", + "ERROR, NOT USED", +}; + +int __init irlap_init(void) +{ + /* Check if the compiler did its job properly. + * May happen on some ARM configuration, check with Russell King. */ + IRDA_ASSERT(sizeof(struct xid_frame) == 14, ;); + IRDA_ASSERT(sizeof(struct test_frame) == 10, ;); + IRDA_ASSERT(sizeof(struct ua_frame) == 10, ;); + IRDA_ASSERT(sizeof(struct snrm_frame) == 11, ;); + + /* Allocate master array */ + irlap = hashbin_new(HB_LOCK); + if (irlap == NULL) { + net_err_ratelimited("%s: can't allocate irlap hashbin!\n", + __func__); + return -ENOMEM; + } + + return 0; +} + +void irlap_cleanup(void) +{ + IRDA_ASSERT(irlap != NULL, return;); + + hashbin_delete(irlap, (FREE_FUNC) __irlap_close); +} + +/* + * Function irlap_open (driver) + * + * Initialize IrLAP layer + * + */ +struct irlap_cb *irlap_open(struct net_device *dev, struct qos_info *qos, + const char *hw_name) +{ + struct irlap_cb *self; + + /* Initialize the irlap structure. */ + self = kzalloc(sizeof(struct irlap_cb), GFP_KERNEL); + if (self == NULL) + return NULL; + + self->magic = LAP_MAGIC; + + /* Make a binding between the layers */ + self->netdev = dev; + self->qos_dev = qos; + /* Copy hardware name */ + if(hw_name != NULL) { + strlcpy(self->hw_name, hw_name, sizeof(self->hw_name)); + } else { + self->hw_name[0] = '\0'; + } + + /* FIXME: should we get our own field? */ + dev->atalk_ptr = self; + + self->state = LAP_OFFLINE; + + /* Initialize transmit queue */ + skb_queue_head_init(&self->txq); + skb_queue_head_init(&self->txq_ultra); + skb_queue_head_init(&self->wx_list); + + /* My unique IrLAP device address! */ + /* We don't want the broadcast address, neither the NULL address + * (most often used to signify "invalid"), and we don't want an + * address already in use (otherwise connect won't be able + * to select the proper link). - Jean II */ + do { + get_random_bytes(&self->saddr, sizeof(self->saddr)); + } while ((self->saddr == 0x0) || (self->saddr == BROADCAST) || + (hashbin_lock_find(irlap, self->saddr, NULL)) ); + /* Copy to the driver */ + memcpy(dev->dev_addr, &self->saddr, 4); + + init_timer(&self->slot_timer); + init_timer(&self->query_timer); + init_timer(&self->discovery_timer); + init_timer(&self->final_timer); + init_timer(&self->poll_timer); + init_timer(&self->wd_timer); + init_timer(&self->backoff_timer); + init_timer(&self->media_busy_timer); + + irlap_apply_default_connection_parameters(self); + + self->N3 = 3; /* # connections attempts to try before giving up */ + + self->state = LAP_NDM; + + hashbin_insert(irlap, (irda_queue_t *) self, self->saddr, NULL); + + irlmp_register_link(self, self->saddr, &self->notify); + + return self; +} +EXPORT_SYMBOL(irlap_open); + +/* + * Function __irlap_close (self) + * + * Remove IrLAP and all allocated memory. Stop any pending timers. + * + */ +static void __irlap_close(struct irlap_cb *self) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + /* Stop timers */ + del_timer(&self->slot_timer); + del_timer(&self->query_timer); + del_timer(&self->discovery_timer); + del_timer(&self->final_timer); + del_timer(&self->poll_timer); + del_timer(&self->wd_timer); + del_timer(&self->backoff_timer); + del_timer(&self->media_busy_timer); + + irlap_flush_all_queues(self); + + self->magic = 0; + + kfree(self); +} + +/* + * Function irlap_close (self) + * + * Remove IrLAP instance + * + */ +void irlap_close(struct irlap_cb *self) +{ + struct irlap_cb *lap; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + /* We used to send a LAP_DISC_INDICATION here, but this was + * racy. This has been move within irlmp_unregister_link() + * itself. Jean II */ + + /* Kill the LAP and all LSAPs on top of it */ + irlmp_unregister_link(self->saddr); + self->notify.instance = NULL; + + /* Be sure that we manage to remove ourself from the hash */ + lap = hashbin_remove(irlap, self->saddr, NULL); + if (!lap) { + pr_debug("%s(), Didn't find myself!\n", __func__); + return; + } + __irlap_close(lap); +} +EXPORT_SYMBOL(irlap_close); + +/* + * Function irlap_connect_indication (self, skb) + * + * Another device is attempting to make a connection + * + */ +void irlap_connect_indication(struct irlap_cb *self, struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + irlap_init_qos_capabilities(self, NULL); /* No user QoS! */ + + irlmp_link_connect_indication(self->notify.instance, self->saddr, + self->daddr, &self->qos_tx, skb); +} + +/* + * Function irlap_connect_response (self, skb) + * + * Service user has accepted incoming connection + * + */ +void irlap_connect_response(struct irlap_cb *self, struct sk_buff *userdata) +{ + irlap_do_event(self, CONNECT_RESPONSE, userdata, NULL); +} + +/* + * Function irlap_connect_request (self, daddr, qos_user, sniff) + * + * Request connection with another device, sniffing is not implemented + * yet. + * + */ +void irlap_connect_request(struct irlap_cb *self, __u32 daddr, + struct qos_info *qos_user, int sniff) +{ + pr_debug("%s(), daddr=0x%08x\n", __func__, daddr); + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + self->daddr = daddr; + + /* + * If the service user specifies QoS values for this connection, + * then use them + */ + irlap_init_qos_capabilities(self, qos_user); + + if ((self->state == LAP_NDM) && !self->media_busy) + irlap_do_event(self, CONNECT_REQUEST, NULL, NULL); + else + self->connect_pending = TRUE; +} + +/* + * Function irlap_connect_confirm (self, skb) + * + * Connection request has been accepted + * + */ +void irlap_connect_confirm(struct irlap_cb *self, struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + irlmp_link_connect_confirm(self->notify.instance, &self->qos_tx, skb); +} + +/* + * Function irlap_data_indication (self, skb) + * + * Received data frames from IR-port, so we just pass them up to + * IrLMP for further processing + * + */ +void irlap_data_indication(struct irlap_cb *self, struct sk_buff *skb, + int unreliable) +{ + /* Hide LAP header from IrLMP layer */ + skb_pull(skb, LAP_ADDR_HEADER+LAP_CTRL_HEADER); + + irlmp_link_data_indication(self->notify.instance, skb, unreliable); +} + + +/* + * Function irlap_data_request (self, skb) + * + * Queue data for transmission, must wait until XMIT state + * + */ +void irlap_data_request(struct irlap_cb *self, struct sk_buff *skb, + int unreliable) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + IRDA_ASSERT(skb_headroom(skb) >= (LAP_ADDR_HEADER+LAP_CTRL_HEADER), + return;); + skb_push(skb, LAP_ADDR_HEADER+LAP_CTRL_HEADER); + + /* + * Must set frame format now so that the rest of the code knows + * if its dealing with an I or an UI frame + */ + if (unreliable) + skb->data[1] = UI_FRAME; + else + skb->data[1] = I_FRAME; + + /* Don't forget to refcount it - see irlmp_connect_request(). */ + skb_get(skb); + + /* Add at the end of the queue (keep ordering) - Jean II */ + skb_queue_tail(&self->txq, skb); + + /* + * Send event if this frame only if we are in the right state + * FIXME: udata should be sent first! (skb_queue_head?) + */ + if ((self->state == LAP_XMIT_P) || (self->state == LAP_XMIT_S)) { + /* If we are not already processing the Tx queue, trigger + * transmission immediately - Jean II */ + if((skb_queue_len(&self->txq) <= 1) && (!self->local_busy)) + irlap_do_event(self, DATA_REQUEST, skb, NULL); + /* Otherwise, the packets will be sent normally at the + * next pf-poll - Jean II */ + } +} + +/* + * Function irlap_unitdata_request (self, skb) + * + * Send Ultra data. This is data that must be sent outside any connection + * + */ +#ifdef CONFIG_IRDA_ULTRA +void irlap_unitdata_request(struct irlap_cb *self, struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + IRDA_ASSERT(skb_headroom(skb) >= (LAP_ADDR_HEADER+LAP_CTRL_HEADER), + return;); + skb_push(skb, LAP_ADDR_HEADER+LAP_CTRL_HEADER); + + skb->data[0] = CBROADCAST; + skb->data[1] = UI_FRAME; + + /* Don't need to refcount, see irlmp_connless_data_request() */ + + skb_queue_tail(&self->txq_ultra, skb); + + irlap_do_event(self, SEND_UI_FRAME, NULL, NULL); +} +#endif /*CONFIG_IRDA_ULTRA */ + +/* + * Function irlap_udata_indication (self, skb) + * + * Receive Ultra data. This is data that is received outside any connection + * + */ +#ifdef CONFIG_IRDA_ULTRA +void irlap_unitdata_indication(struct irlap_cb *self, struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + IRDA_ASSERT(skb != NULL, return;); + + /* Hide LAP header from IrLMP layer */ + skb_pull(skb, LAP_ADDR_HEADER+LAP_CTRL_HEADER); + + irlmp_link_unitdata_indication(self->notify.instance, skb); +} +#endif /* CONFIG_IRDA_ULTRA */ + +/* + * Function irlap_disconnect_request (void) + * + * Request to disconnect connection by service user + */ +void irlap_disconnect_request(struct irlap_cb *self) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + /* Don't disconnect until all data frames are successfully sent */ + if (!skb_queue_empty(&self->txq)) { + self->disconnect_pending = TRUE; + return; + } + + /* Check if we are in the right state for disconnecting */ + switch (self->state) { + case LAP_XMIT_P: /* FALLTHROUGH */ + case LAP_XMIT_S: /* FALLTHROUGH */ + case LAP_CONN: /* FALLTHROUGH */ + case LAP_RESET_WAIT: /* FALLTHROUGH */ + case LAP_RESET_CHECK: + irlap_do_event(self, DISCONNECT_REQUEST, NULL, NULL); + break; + default: + pr_debug("%s(), disconnect pending!\n", __func__); + self->disconnect_pending = TRUE; + break; + } +} + +/* + * Function irlap_disconnect_indication (void) + * + * Disconnect request from other device + * + */ +void irlap_disconnect_indication(struct irlap_cb *self, LAP_REASON reason) +{ + pr_debug("%s(), reason=%s\n", __func__, lap_reasons[reason]); + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + /* Flush queues */ + irlap_flush_all_queues(self); + + switch (reason) { + case LAP_RESET_INDICATION: + pr_debug("%s(), Sending reset request!\n", __func__); + irlap_do_event(self, RESET_REQUEST, NULL, NULL); + break; + case LAP_NO_RESPONSE: /* FALLTHROUGH */ + case LAP_DISC_INDICATION: /* FALLTHROUGH */ + case LAP_FOUND_NONE: /* FALLTHROUGH */ + case LAP_MEDIA_BUSY: + irlmp_link_disconnect_indication(self->notify.instance, self, + reason, NULL); + break; + default: + net_err_ratelimited("%s: Unknown reason %d\n", + __func__, reason); + } +} + +/* + * Function irlap_discovery_request (gen_addr_bit) + * + * Start one single discovery operation. + * + */ +void irlap_discovery_request(struct irlap_cb *self, discovery_t *discovery) +{ + struct irlap_info info; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + IRDA_ASSERT(discovery != NULL, return;); + + pr_debug("%s(), nslots = %d\n", __func__, discovery->nslots); + + IRDA_ASSERT((discovery->nslots == 1) || (discovery->nslots == 6) || + (discovery->nslots == 8) || (discovery->nslots == 16), + return;); + + /* Discovery is only possible in NDM mode */ + if (self->state != LAP_NDM) { + pr_debug("%s(), discovery only possible in NDM mode\n", + __func__); + irlap_discovery_confirm(self, NULL); + /* Note : in theory, if we are not in NDM, we could postpone + * the discovery like we do for connection request. + * In practice, it's not worth it. If the media was busy, + * it's likely next time around it won't be busy. If we are + * in REPLY state, we will get passive discovery info & event. + * Jean II */ + return; + } + + /* Check if last discovery request finished in time, or if + * it was aborted due to the media busy flag. */ + if (self->discovery_log != NULL) { + hashbin_delete(self->discovery_log, (FREE_FUNC) kfree); + self->discovery_log = NULL; + } + + /* All operations will occur at predictable time, no need to lock */ + self->discovery_log = hashbin_new(HB_NOLOCK); + + if (self->discovery_log == NULL) { + net_warn_ratelimited("%s(), Unable to allocate discovery log!\n", + __func__); + return; + } + + info.S = discovery->nslots; /* Number of slots */ + info.s = 0; /* Current slot */ + + self->discovery_cmd = discovery; + info.discovery = discovery; + + /* sysctl_slot_timeout bounds are checked in irsysctl.c - Jean II */ + self->slot_timeout = msecs_to_jiffies(sysctl_slot_timeout); + + irlap_do_event(self, DISCOVERY_REQUEST, NULL, &info); +} + +/* + * Function irlap_discovery_confirm (log) + * + * A device has been discovered in front of this station, we + * report directly to LMP. + */ +void irlap_discovery_confirm(struct irlap_cb *self, hashbin_t *discovery_log) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + IRDA_ASSERT(self->notify.instance != NULL, return;); + + /* + * Check for successful discovery, since we are then allowed to clear + * the media busy condition (IrLAP 6.13.4 - p.94). This should allow + * us to make connection attempts much faster and easier (i.e. no + * collisions). + * Setting media busy to false will also generate an event allowing + * to process pending events in NDM state machine. + * Note : the spec doesn't define what's a successful discovery is. + * If we want Ultra to work, it's successful even if there is + * nobody discovered - Jean II + */ + if (discovery_log) + irda_device_set_media_busy(self->netdev, FALSE); + + /* Inform IrLMP */ + irlmp_link_discovery_confirm(self->notify.instance, discovery_log); +} + +/* + * Function irlap_discovery_indication (log) + * + * Somebody is trying to discover us! + * + */ +void irlap_discovery_indication(struct irlap_cb *self, discovery_t *discovery) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + IRDA_ASSERT(discovery != NULL, return;); + + IRDA_ASSERT(self->notify.instance != NULL, return;); + + /* A device is very likely to connect immediately after it performs + * a successful discovery. This means that in our case, we are much + * more likely to receive a connection request over the medium. + * So, we backoff to avoid collisions. + * IrLAP spec 6.13.4 suggest 100ms... + * Note : this little trick actually make a *BIG* difference. If I set + * my Linux box with discovery enabled and one Ultra frame sent every + * second, my Palm has no trouble connecting to it every time ! + * Jean II */ + irda_device_set_media_busy(self->netdev, SMALL); + + irlmp_link_discovery_indication(self->notify.instance, discovery); +} + +/* + * Function irlap_status_indication (quality_of_link) + */ +void irlap_status_indication(struct irlap_cb *self, int quality_of_link) +{ + switch (quality_of_link) { + case STATUS_NO_ACTIVITY: + net_info_ratelimited("IrLAP, no activity on link!\n"); + break; + case STATUS_NOISY: + net_info_ratelimited("IrLAP, noisy link!\n"); + break; + default: + break; + } + irlmp_status_indication(self->notify.instance, + quality_of_link, LOCK_NO_CHANGE); +} + +/* + * Function irlap_reset_indication (void) + */ +void irlap_reset_indication(struct irlap_cb *self) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + if (self->state == LAP_RESET_WAIT) + irlap_do_event(self, RESET_REQUEST, NULL, NULL); + else + irlap_do_event(self, RESET_RESPONSE, NULL, NULL); +} + +/* + * Function irlap_reset_confirm (void) + */ +void irlap_reset_confirm(void) +{ +} + +/* + * Function irlap_generate_rand_time_slot (S, s) + * + * Generate a random time slot between s and S-1 where + * S = Number of slots (0 -> S-1) + * s = Current slot + */ +int irlap_generate_rand_time_slot(int S, int s) +{ + static int rand; + int slot; + + IRDA_ASSERT((S - s) > 0, return 0;); + + rand += jiffies; + rand ^= (rand << 12); + rand ^= (rand >> 20); + + slot = s + rand % (S-s); + + IRDA_ASSERT((slot >= s) || (slot < S), return 0;); + + return slot; +} + +/* + * Function irlap_update_nr_received (nr) + * + * Remove all acknowledged frames in current window queue. This code is + * not intuitive and you should not try to change it. If you think it + * contains bugs, please mail a patch to the author instead. + */ +void irlap_update_nr_received(struct irlap_cb *self, int nr) +{ + struct sk_buff *skb = NULL; + int count = 0; + + /* + * Remove all the ack-ed frames from the window queue. + */ + + /* + * Optimize for the common case. It is most likely that the receiver + * will acknowledge all the frames we have sent! So in that case we + * delete all frames stored in window. + */ + if (nr == self->vs) { + while ((skb = skb_dequeue(&self->wx_list)) != NULL) { + dev_kfree_skb(skb); + } + /* The last acked frame is the next to send minus one */ + self->va = nr - 1; + } else { + /* Remove all acknowledged frames in current window */ + while ((skb_peek(&self->wx_list) != NULL) && + (((self->va+1) % 8) != nr)) + { + skb = skb_dequeue(&self->wx_list); + dev_kfree_skb(skb); + + self->va = (self->va + 1) % 8; + count++; + } + } + + /* Advance window */ + self->window = self->window_size - skb_queue_len(&self->wx_list); +} + +/* + * Function irlap_validate_ns_received (ns) + * + * Validate the next to send (ns) field from received frame. + */ +int irlap_validate_ns_received(struct irlap_cb *self, int ns) +{ + /* ns as expected? */ + if (ns == self->vr) + return NS_EXPECTED; + /* + * Stations are allowed to treat invalid NS as unexpected NS + * IrLAP, Recv ... with-invalid-Ns. p. 84 + */ + return NS_UNEXPECTED; + + /* return NR_INVALID; */ +} +/* + * Function irlap_validate_nr_received (nr) + * + * Validate the next to receive (nr) field from received frame. + * + */ +int irlap_validate_nr_received(struct irlap_cb *self, int nr) +{ + /* nr as expected? */ + if (nr == self->vs) { + pr_debug("%s(), expected!\n", __func__); + return NR_EXPECTED; + } + + /* + * unexpected nr? (but within current window), first we check if the + * ns numbers of the frames in the current window wrap. + */ + if (self->va < self->vs) { + if ((nr >= self->va) && (nr <= self->vs)) + return NR_UNEXPECTED; + } else { + if ((nr >= self->va) || (nr <= self->vs)) + return NR_UNEXPECTED; + } + + /* Invalid nr! */ + return NR_INVALID; +} + +/* + * Function irlap_initiate_connection_state () + * + * Initialize the connection state parameters + * + */ +void irlap_initiate_connection_state(struct irlap_cb *self) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + /* Next to send and next to receive */ + self->vs = self->vr = 0; + + /* Last frame which got acked (0 - 1) % 8 */ + self->va = 7; + + self->window = 1; + + self->remote_busy = FALSE; + self->retry_count = 0; +} + +/* + * Function irlap_wait_min_turn_around (self, qos) + * + * Wait negotiated minimum turn around time, this function actually sets + * the number of BOS's that must be sent before the next transmitted + * frame in order to delay for the specified amount of time. This is + * done to avoid using timers, and the forbidden udelay! + */ +void irlap_wait_min_turn_around(struct irlap_cb *self, struct qos_info *qos) +{ + __u32 min_turn_time; + __u32 speed; + + /* Get QoS values. */ + speed = qos->baud_rate.value; + min_turn_time = qos->min_turn_time.value; + + /* No need to calculate XBOFs for speeds over 115200 bps */ + if (speed > 115200) { + self->mtt_required = min_turn_time; + return; + } + + /* + * Send additional BOF's for the next frame for the requested + * min turn time, so now we must calculate how many chars (XBOF's) we + * must send for the requested time period (min turn time) + */ + self->xbofs_delay = irlap_min_turn_time_in_bytes(speed, min_turn_time); +} + +/* + * Function irlap_flush_all_queues (void) + * + * Flush all queues + * + */ +void irlap_flush_all_queues(struct irlap_cb *self) +{ + struct sk_buff* skb; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + /* Free transmission queue */ + while ((skb = skb_dequeue(&self->txq)) != NULL) + dev_kfree_skb(skb); + + while ((skb = skb_dequeue(&self->txq_ultra)) != NULL) + dev_kfree_skb(skb); + + /* Free sliding window buffered packets */ + while ((skb = skb_dequeue(&self->wx_list)) != NULL) + dev_kfree_skb(skb); +} + +/* + * Function irlap_setspeed (self, speed) + * + * Change the speed of the IrDA port + * + */ +static void irlap_change_speed(struct irlap_cb *self, __u32 speed, int now) +{ + struct sk_buff *skb; + + pr_debug("%s(), setting speed to %d\n", __func__, speed); + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + self->speed = speed; + + /* Change speed now, or just piggyback speed on frames */ + if (now) { + /* Send down empty frame to trigger speed change */ + skb = alloc_skb(0, GFP_ATOMIC); + if (skb) + irlap_queue_xmit(self, skb); + } +} + +/* + * Function irlap_init_qos_capabilities (self, qos) + * + * Initialize QoS for this IrLAP session, What we do is to compute the + * intersection of the QoS capabilities for the user, driver and for + * IrLAP itself. Normally, IrLAP will not specify any values, but it can + * be used to restrict certain values. + */ +static void irlap_init_qos_capabilities(struct irlap_cb *self, + struct qos_info *qos_user) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + IRDA_ASSERT(self->netdev != NULL, return;); + + /* Start out with the maximum QoS support possible */ + irda_init_max_qos_capabilies(&self->qos_rx); + + /* Apply drivers QoS capabilities */ + irda_qos_compute_intersection(&self->qos_rx, self->qos_dev); + + /* + * Check for user supplied QoS parameters. The service user is only + * allowed to supply these values. We check each parameter since the + * user may not have set all of them. + */ + if (qos_user) { + pr_debug("%s(), Found user specified QoS!\n", __func__); + + if (qos_user->baud_rate.bits) + self->qos_rx.baud_rate.bits &= qos_user->baud_rate.bits; + + if (qos_user->max_turn_time.bits) + self->qos_rx.max_turn_time.bits &= qos_user->max_turn_time.bits; + if (qos_user->data_size.bits) + self->qos_rx.data_size.bits &= qos_user->data_size.bits; + + if (qos_user->link_disc_time.bits) + self->qos_rx.link_disc_time.bits &= qos_user->link_disc_time.bits; + } + + /* Use 500ms in IrLAP for now */ + self->qos_rx.max_turn_time.bits &= 0x01; + + /* Set data size */ + /*self->qos_rx.data_size.bits &= 0x03;*/ + + irda_qos_bits_to_value(&self->qos_rx); +} + +/* + * Function irlap_apply_default_connection_parameters (void, now) + * + * Use the default connection and transmission parameters + */ +void irlap_apply_default_connection_parameters(struct irlap_cb *self) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + /* xbofs : Default value in NDM */ + self->next_bofs = 12; + self->bofs_count = 12; + + /* NDM Speed is 9600 */ + irlap_change_speed(self, 9600, TRUE); + + /* Set mbusy when going to NDM state */ + irda_device_set_media_busy(self->netdev, TRUE); + + /* + * Generate random connection address for this session, which must + * be 7 bits wide and different from 0x00 and 0xfe + */ + while ((self->caddr == 0x00) || (self->caddr == 0xfe)) { + get_random_bytes(&self->caddr, sizeof(self->caddr)); + self->caddr &= 0xfe; + } + + /* Use default values until connection has been negitiated */ + self->slot_timeout = sysctl_slot_timeout; + self->final_timeout = FINAL_TIMEOUT; + self->poll_timeout = POLL_TIMEOUT; + self->wd_timeout = WD_TIMEOUT; + + /* Set some default values */ + self->qos_tx.baud_rate.value = 9600; + self->qos_rx.baud_rate.value = 9600; + self->qos_tx.max_turn_time.value = 0; + self->qos_rx.max_turn_time.value = 0; + self->qos_tx.min_turn_time.value = 0; + self->qos_rx.min_turn_time.value = 0; + self->qos_tx.data_size.value = 64; + self->qos_rx.data_size.value = 64; + self->qos_tx.window_size.value = 1; + self->qos_rx.window_size.value = 1; + self->qos_tx.additional_bofs.value = 12; + self->qos_rx.additional_bofs.value = 12; + self->qos_tx.link_disc_time.value = 0; + self->qos_rx.link_disc_time.value = 0; + + irlap_flush_all_queues(self); + + self->disconnect_pending = FALSE; + self->connect_pending = FALSE; +} + +/* + * Function irlap_apply_connection_parameters (qos, now) + * + * Initialize IrLAP with the negotiated QoS values + * + * If 'now' is false, the speed and xbofs will be changed after the next + * frame is sent. + * If 'now' is true, the speed and xbofs is changed immediately + */ +void irlap_apply_connection_parameters(struct irlap_cb *self, int now) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + /* Set the negotiated xbofs value */ + self->next_bofs = self->qos_tx.additional_bofs.value; + if (now) + self->bofs_count = self->next_bofs; + + /* Set the negotiated link speed (may need the new xbofs value) */ + irlap_change_speed(self, self->qos_tx.baud_rate.value, now); + + self->window_size = self->qos_tx.window_size.value; + self->window = self->qos_tx.window_size.value; + +#ifdef CONFIG_IRDA_DYNAMIC_WINDOW + /* + * Calculate how many bytes it is possible to transmit before the + * link must be turned around + */ + self->line_capacity = + irlap_max_line_capacity(self->qos_tx.baud_rate.value, + self->qos_tx.max_turn_time.value); + self->bytes_left = self->line_capacity; +#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */ + + + /* + * Initialize timeout values, some of the rules are listed on + * page 92 in IrLAP. + */ + IRDA_ASSERT(self->qos_tx.max_turn_time.value != 0, return;); + IRDA_ASSERT(self->qos_rx.max_turn_time.value != 0, return;); + /* The poll timeout applies only to the primary station. + * It defines the maximum time the primary stay in XMIT mode + * before timeout and turning the link around (sending a RR). + * Or, this is how much we can keep the pf bit in primary mode. + * Therefore, it must be lower or equal than our *OWN* max turn around. + * Jean II */ + self->poll_timeout = msecs_to_jiffies( + self->qos_tx.max_turn_time.value); + /* The Final timeout applies only to the primary station. + * It defines the maximum time the primary wait (mostly in RECV mode) + * for an answer from the secondary station before polling it again. + * Therefore, it must be greater or equal than our *PARTNER* + * max turn around time - Jean II */ + self->final_timeout = msecs_to_jiffies( + self->qos_rx.max_turn_time.value); + /* The Watchdog Bit timeout applies only to the secondary station. + * It defines the maximum time the secondary wait (mostly in RECV mode) + * for poll from the primary station before getting annoyed. + * Therefore, it must be greater or equal than our *PARTNER* + * max turn around time - Jean II */ + self->wd_timeout = self->final_timeout * 2; + + /* + * N1 and N2 are maximum retry count for *both* the final timer + * and the wd timer (with a factor 2) as defined above. + * After N1 retry of a timer, we give a warning to the user. + * After N2 retry, we consider the link dead and disconnect it. + * Jean II + */ + + /* + * Set N1 to 0 if Link Disconnect/Threshold Time = 3 and set it to + * 3 seconds otherwise. See page 71 in IrLAP for more details. + * Actually, it's not always 3 seconds, as we allow to set + * it via sysctl... Max maxtt is 500ms, and N1 need to be multiple + * of 2, so 1 second is minimum we can allow. - Jean II + */ + if (self->qos_tx.link_disc_time.value == sysctl_warn_noreply_time) + /* + * If we set N1 to 0, it will trigger immediately, which is + * not what we want. What we really want is to disable it, + * Jean II + */ + self->N1 = -2; /* Disable - Need to be multiple of 2*/ + else + self->N1 = sysctl_warn_noreply_time * 1000 / + self->qos_rx.max_turn_time.value; + + pr_debug("Setting N1 = %d\n", self->N1); + + /* Set N2 to match our own disconnect time */ + self->N2 = self->qos_tx.link_disc_time.value * 1000 / + self->qos_rx.max_turn_time.value; + pr_debug("Setting N2 = %d\n", self->N2); +} + +#ifdef CONFIG_PROC_FS +struct irlap_iter_state { + int id; +}; + +static void *irlap_seq_start(struct seq_file *seq, loff_t *pos) +{ + struct irlap_iter_state *iter = seq->private; + struct irlap_cb *self; + + /* Protect our access to the tsap list */ + spin_lock_irq(&irlap->hb_spinlock); + iter->id = 0; + + for (self = (struct irlap_cb *) hashbin_get_first(irlap); + self; self = (struct irlap_cb *) hashbin_get_next(irlap)) { + if (iter->id == *pos) + break; + ++iter->id; + } + + return self; +} + +static void *irlap_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + struct irlap_iter_state *iter = seq->private; + + ++*pos; + ++iter->id; + return (void *) hashbin_get_next(irlap); +} + +static void irlap_seq_stop(struct seq_file *seq, void *v) +{ + spin_unlock_irq(&irlap->hb_spinlock); +} + +static int irlap_seq_show(struct seq_file *seq, void *v) +{ + const struct irlap_iter_state *iter = seq->private; + const struct irlap_cb *self = v; + + IRDA_ASSERT(self->magic == LAP_MAGIC, return -EINVAL;); + + seq_printf(seq, "irlap%d ", iter->id); + seq_printf(seq, "state: %s\n", + irlap_state[self->state]); + + seq_printf(seq, " device name: %s, ", + (self->netdev) ? self->netdev->name : "bug"); + seq_printf(seq, "hardware name: %s\n", self->hw_name); + + seq_printf(seq, " caddr: %#02x, ", self->caddr); + seq_printf(seq, "saddr: %#08x, ", self->saddr); + seq_printf(seq, "daddr: %#08x\n", self->daddr); + + seq_printf(seq, " win size: %d, ", + self->window_size); + seq_printf(seq, "win: %d, ", self->window); +#ifdef CONFIG_IRDA_DYNAMIC_WINDOW + seq_printf(seq, "line capacity: %d, ", + self->line_capacity); + seq_printf(seq, "bytes left: %d\n", self->bytes_left); +#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */ + seq_printf(seq, " tx queue len: %d ", + skb_queue_len(&self->txq)); + seq_printf(seq, "win queue len: %d ", + skb_queue_len(&self->wx_list)); + seq_printf(seq, "rbusy: %s", self->remote_busy ? + "TRUE" : "FALSE"); + seq_printf(seq, " mbusy: %s\n", self->media_busy ? + "TRUE" : "FALSE"); + + seq_printf(seq, " retrans: %d ", self->retry_count); + seq_printf(seq, "vs: %d ", self->vs); + seq_printf(seq, "vr: %d ", self->vr); + seq_printf(seq, "va: %d\n", self->va); + + seq_printf(seq, " qos\tbps\tmaxtt\tdsize\twinsize\taddbofs\tmintt\tldisc\tcomp\n"); + + seq_printf(seq, " tx\t%d\t", + self->qos_tx.baud_rate.value); + seq_printf(seq, "%d\t", + self->qos_tx.max_turn_time.value); + seq_printf(seq, "%d\t", + self->qos_tx.data_size.value); + seq_printf(seq, "%d\t", + self->qos_tx.window_size.value); + seq_printf(seq, "%d\t", + self->qos_tx.additional_bofs.value); + seq_printf(seq, "%d\t", + self->qos_tx.min_turn_time.value); + seq_printf(seq, "%d\t", + self->qos_tx.link_disc_time.value); + seq_printf(seq, "\n"); + + seq_printf(seq, " rx\t%d\t", + self->qos_rx.baud_rate.value); + seq_printf(seq, "%d\t", + self->qos_rx.max_turn_time.value); + seq_printf(seq, "%d\t", + self->qos_rx.data_size.value); + seq_printf(seq, "%d\t", + self->qos_rx.window_size.value); + seq_printf(seq, "%d\t", + self->qos_rx.additional_bofs.value); + seq_printf(seq, "%d\t", + self->qos_rx.min_turn_time.value); + seq_printf(seq, "%d\n", + self->qos_rx.link_disc_time.value); + + return 0; +} + +static const struct seq_operations irlap_seq_ops = { + .start = irlap_seq_start, + .next = irlap_seq_next, + .stop = irlap_seq_stop, + .show = irlap_seq_show, +}; + +static int irlap_seq_open(struct inode *inode, struct file *file) +{ + if (irlap == NULL) + return -EINVAL; + + return seq_open_private(file, &irlap_seq_ops, + sizeof(struct irlap_iter_state)); +} + +const struct file_operations irlap_seq_fops = { + .owner = THIS_MODULE, + .open = irlap_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release_private, +}; + +#endif /* CONFIG_PROC_FS */ diff --git a/kernel/net/irda/irlap_event.c b/kernel/net/irda/irlap_event.c new file mode 100644 index 000000000..0e1b4d79f --- /dev/null +++ b/kernel/net/irda/irlap_event.c @@ -0,0 +1,2316 @@ +/********************************************************************* + * + * Filename: irlap_event.c + * Version: 0.9 + * Description: IrLAP state machine implementation + * Status: Experimental. + * Author: Dag Brattli <dag@brattli.net> + * Created at: Sat Aug 16 00:59:29 1997 + * Modified at: Sat Dec 25 21:07:57 1999 + * Modified by: Dag Brattli <dag@brattli.net> + * + * Copyright (c) 1998-2000 Dag Brattli <dag@brattli.net>, + * Copyright (c) 1998 Thomas Davis <ratbert@radiks.net> + * All Rights Reserved. + * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/skbuff.h> +#include <linux/slab.h> + +#include <net/irda/irda.h> +#include <net/irda/irlap_event.h> + +#include <net/irda/timer.h> +#include <net/irda/irlap.h> +#include <net/irda/irlap_frame.h> +#include <net/irda/qos.h> +#include <net/irda/parameters.h> +#include <net/irda/irlmp.h> /* irlmp_flow_indication(), ... */ + +#include <net/irda/irda_device.h> + +#ifdef CONFIG_IRDA_FAST_RR +int sysctl_fast_poll_increase = 50; +#endif + +static int irlap_state_ndm (struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info); +static int irlap_state_query (struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info); +static int irlap_state_reply (struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info); +static int irlap_state_conn (struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info); +static int irlap_state_setup (struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info); +static int irlap_state_offline(struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info); +static int irlap_state_xmit_p (struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info); +static int irlap_state_pclose (struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info); +static int irlap_state_nrm_p (struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info); +static int irlap_state_reset_wait(struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info); +static int irlap_state_reset (struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info); +static int irlap_state_nrm_s (struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info); +static int irlap_state_xmit_s (struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info); +static int irlap_state_sclose (struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info); +static int irlap_state_reset_check(struct irlap_cb *, IRLAP_EVENT event, + struct sk_buff *, struct irlap_info *); + +static const char *const irlap_event[] __maybe_unused = { + "DISCOVERY_REQUEST", + "CONNECT_REQUEST", + "CONNECT_RESPONSE", + "DISCONNECT_REQUEST", + "DATA_REQUEST", + "RESET_REQUEST", + "RESET_RESPONSE", + "SEND_I_CMD", + "SEND_UI_FRAME", + "RECV_DISCOVERY_XID_CMD", + "RECV_DISCOVERY_XID_RSP", + "RECV_SNRM_CMD", + "RECV_TEST_CMD", + "RECV_TEST_RSP", + "RECV_UA_RSP", + "RECV_DM_RSP", + "RECV_RD_RSP", + "RECV_I_CMD", + "RECV_I_RSP", + "RECV_UI_FRAME", + "RECV_FRMR_RSP", + "RECV_RR_CMD", + "RECV_RR_RSP", + "RECV_RNR_CMD", + "RECV_RNR_RSP", + "RECV_REJ_CMD", + "RECV_REJ_RSP", + "RECV_SREJ_CMD", + "RECV_SREJ_RSP", + "RECV_DISC_CMD", + "SLOT_TIMER_EXPIRED", + "QUERY_TIMER_EXPIRED", + "FINAL_TIMER_EXPIRED", + "POLL_TIMER_EXPIRED", + "DISCOVERY_TIMER_EXPIRED", + "WD_TIMER_EXPIRED", + "BACKOFF_TIMER_EXPIRED", + "MEDIA_BUSY_TIMER_EXPIRED", +}; + +const char *const irlap_state[] = { + "LAP_NDM", + "LAP_QUERY", + "LAP_REPLY", + "LAP_CONN", + "LAP_SETUP", + "LAP_OFFLINE", + "LAP_XMIT_P", + "LAP_PCLOSE", + "LAP_NRM_P", + "LAP_RESET_WAIT", + "LAP_RESET", + "LAP_NRM_S", + "LAP_XMIT_S", + "LAP_SCLOSE", + "LAP_RESET_CHECK", +}; + +static int (*state[])(struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info) = +{ + irlap_state_ndm, + irlap_state_query, + irlap_state_reply, + irlap_state_conn, + irlap_state_setup, + irlap_state_offline, + irlap_state_xmit_p, + irlap_state_pclose, + irlap_state_nrm_p, + irlap_state_reset_wait, + irlap_state_reset, + irlap_state_nrm_s, + irlap_state_xmit_s, + irlap_state_sclose, + irlap_state_reset_check, +}; + +/* + * Function irda_poll_timer_expired (data) + * + * Poll timer has expired. Normally we must now send a RR frame to the + * remote device + */ +static void irlap_poll_timer_expired(void *data) +{ + struct irlap_cb *self = (struct irlap_cb *) data; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + irlap_do_event(self, POLL_TIMER_EXPIRED, NULL, NULL); +} + +/* + * Calculate and set time before we will have to send back the pf bit + * to the peer. Use in primary. + * Make sure that state is XMIT_P/XMIT_S when calling this function + * (and that nobody messed up with the state). - Jean II + */ +static void irlap_start_poll_timer(struct irlap_cb *self, int timeout) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + +#ifdef CONFIG_IRDA_FAST_RR + /* + * Send out the RR frames faster if our own transmit queue is empty, or + * if the peer is busy. The effect is a much faster conversation + */ + if (skb_queue_empty(&self->txq) || self->remote_busy) { + if (self->fast_RR == TRUE) { + /* + * Assert that the fast poll timer has not reached the + * normal poll timer yet + */ + if (self->fast_RR_timeout < timeout) { + /* + * FIXME: this should be a more configurable + * function + */ + self->fast_RR_timeout += + (sysctl_fast_poll_increase * HZ/1000); + + /* Use this fast(er) timeout instead */ + timeout = self->fast_RR_timeout; + } + } else { + self->fast_RR = TRUE; + + /* Start with just 0 ms */ + self->fast_RR_timeout = 0; + timeout = 0; + } + } else + self->fast_RR = FALSE; + + pr_debug("%s(), timeout=%d (%ld)\n", __func__, timeout, jiffies); +#endif /* CONFIG_IRDA_FAST_RR */ + + if (timeout == 0) + irlap_do_event(self, POLL_TIMER_EXPIRED, NULL, NULL); + else + irda_start_timer(&self->poll_timer, timeout, self, + irlap_poll_timer_expired); +} + +/* + * Function irlap_do_event (event, skb, info) + * + * Rushes through the state machine without any delay. If state == XMIT + * then send queued data frames. + */ +void irlap_do_event(struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info) +{ + int ret; + + if (!self || self->magic != LAP_MAGIC) + return; + + pr_debug("%s(), event = %s, state = %s\n", __func__, + irlap_event[event], irlap_state[self->state]); + + ret = (*state[self->state])(self, event, skb, info); + + /* + * Check if there are any pending events that needs to be executed + */ + switch (self->state) { + case LAP_XMIT_P: /* FALLTHROUGH */ + case LAP_XMIT_S: + /* + * We just received the pf bit and are at the beginning + * of a new LAP transmit window. + * Check if there are any queued data frames, and do not + * try to disconnect link if we send any data frames, since + * that will change the state away form XMIT + */ + pr_debug("%s() : queue len = %d\n", __func__, + skb_queue_len(&self->txq)); + + if (!skb_queue_empty(&self->txq)) { + /* Prevent race conditions with irlap_data_request() */ + self->local_busy = TRUE; + + /* Theory of operation. + * We send frames up to when we fill the window or + * reach line capacity. Those frames will queue up + * in the device queue, and the driver will slowly + * send them. + * After each frame that we send, we poll the higher + * layer for more data. It's the right time to do + * that because the link layer need to perform the mtt + * and then send the first frame, so we can afford + * to send a bit of time in kernel space. + * The explicit flow indication allow to minimise + * buffers (== lower latency), to avoid higher layer + * polling via timers (== less context switches) and + * to implement a crude scheduler - Jean II */ + + /* Try to send away all queued data frames */ + while ((skb = skb_dequeue(&self->txq)) != NULL) { + /* Send one frame */ + ret = (*state[self->state])(self, SEND_I_CMD, + skb, NULL); + /* Drop reference count. + * It will be increase as needed in + * irlap_send_data_xxx() */ + kfree_skb(skb); + + /* Poll the higher layers for one more frame */ + irlmp_flow_indication(self->notify.instance, + FLOW_START); + + if (ret == -EPROTO) + break; /* Try again later! */ + } + /* Finished transmitting */ + self->local_busy = FALSE; + } else if (self->disconnect_pending) { + self->disconnect_pending = FALSE; + + ret = (*state[self->state])(self, DISCONNECT_REQUEST, + NULL, NULL); + } + break; +/* case LAP_NDM: */ +/* case LAP_CONN: */ +/* case LAP_RESET_WAIT: */ +/* case LAP_RESET_CHECK: */ + default: + break; + } +} + +/* + * Function irlap_state_ndm (event, skb, frame) + * + * NDM (Normal Disconnected Mode) state + * + */ +static int irlap_state_ndm(struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info) +{ + discovery_t *discovery_rsp; + int ret = 0; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); + + switch (event) { + case CONNECT_REQUEST: + IRDA_ASSERT(self->netdev != NULL, return -1;); + + if (self->media_busy) { + /* Note : this will never happen, because we test + * media busy in irlap_connect_request() and + * postpone the event... - Jean II */ + pr_debug("%s(), CONNECT_REQUEST: media busy!\n", + __func__); + + /* Always switch state before calling upper layers */ + irlap_next_state(self, LAP_NDM); + + irlap_disconnect_indication(self, LAP_MEDIA_BUSY); + } else { + irlap_send_snrm_frame(self, &self->qos_rx); + + /* Start Final-bit timer */ + irlap_start_final_timer(self, self->final_timeout); + + self->retry_count = 0; + irlap_next_state(self, LAP_SETUP); + } + break; + case RECV_SNRM_CMD: + /* Check if the frame contains and I field */ + if (info) { + self->daddr = info->daddr; + self->caddr = info->caddr; + + irlap_next_state(self, LAP_CONN); + + irlap_connect_indication(self, skb); + } else { + pr_debug("%s(), SNRM frame does not contain an I field!\n", + __func__); + } + break; + case DISCOVERY_REQUEST: + IRDA_ASSERT(info != NULL, return -1;); + + if (self->media_busy) { + pr_debug("%s(), DISCOVERY_REQUEST: media busy!\n", + __func__); + /* irlap->log.condition = MEDIA_BUSY; */ + + /* This will make IrLMP try again */ + irlap_discovery_confirm(self, NULL); + /* Note : the discovery log is not cleaned up here, + * it will be done in irlap_discovery_request() + * Jean II */ + return 0; + } + + self->S = info->S; + self->s = info->s; + irlap_send_discovery_xid_frame(self, info->S, info->s, TRUE, + info->discovery); + self->frame_sent = FALSE; + self->s++; + + irlap_start_slot_timer(self, self->slot_timeout); + irlap_next_state(self, LAP_QUERY); + break; + case RECV_DISCOVERY_XID_CMD: + IRDA_ASSERT(info != NULL, return -1;); + + /* Assert that this is not the final slot */ + if (info->s <= info->S) { + self->slot = irlap_generate_rand_time_slot(info->S, + info->s); + if (self->slot == info->s) { + discovery_rsp = irlmp_get_discovery_response(); + discovery_rsp->data.daddr = info->daddr; + + irlap_send_discovery_xid_frame(self, info->S, + self->slot, + FALSE, + discovery_rsp); + self->frame_sent = TRUE; + } else + self->frame_sent = FALSE; + + /* + * Go to reply state until end of discovery to + * inhibit our own transmissions. Set the timer + * to not stay forever there... Jean II + */ + irlap_start_query_timer(self, info->S, info->s); + irlap_next_state(self, LAP_REPLY); + } else { + /* This is the final slot. How is it possible ? + * This would happen is both discoveries are just slightly + * offset (if they are in sync, all packets are lost). + * Most often, all the discovery requests will be received + * in QUERY state (see my comment there), except for the + * last frame that will come here. + * The big trouble when it happen is that active discovery + * doesn't happen, because nobody answer the discoveries + * frame of the other guy, so the log shows up empty. + * What should we do ? + * Not much. It's too late to answer those discovery frames, + * so we just pass the info to IrLMP who will put it in the + * log (and post an event). + * Another cause would be devices that do discovery much + * slower than us, however the latest fixes should minimise + * those cases... + * Jean II + */ + pr_debug("%s(), Receiving final discovery request, missed the discovery slots :-(\n", + __func__); + + /* Last discovery request -> in the log */ + irlap_discovery_indication(self, info->discovery); + } + break; + case MEDIA_BUSY_TIMER_EXPIRED: + /* A bunch of events may be postponed because the media is + * busy (usually immediately after we close a connection), + * or while we are doing discovery (state query/reply). + * In all those cases, the media busy flag will be cleared + * when it's OK for us to process those postponed events. + * This event is not mentioned in the state machines in the + * IrLAP spec. It's because they didn't consider Ultra and + * postponing connection request is optional. + * Jean II */ +#ifdef CONFIG_IRDA_ULTRA + /* Send any pending Ultra frames if any */ + if (!skb_queue_empty(&self->txq_ultra)) { + /* We don't send the frame, just post an event. + * Also, previously this code was in timer.c... + * Jean II */ + ret = (*state[self->state])(self, SEND_UI_FRAME, + NULL, NULL); + } +#endif /* CONFIG_IRDA_ULTRA */ + /* Check if we should try to connect. + * This code was previously in irlap_do_event() */ + if (self->connect_pending) { + self->connect_pending = FALSE; + + /* This one *should* not pend in this state, except + * if a socket try to connect and immediately + * disconnect. - clear - Jean II */ + if (self->disconnect_pending) + irlap_disconnect_indication(self, LAP_DISC_INDICATION); + else + ret = (*state[self->state])(self, + CONNECT_REQUEST, + NULL, NULL); + self->disconnect_pending = FALSE; + } + /* Note : one way to test if this code works well (including + * media busy and small busy) is to create a user space + * application generating an Ultra packet every 3.05 sec (or + * 2.95 sec) and to see how it interact with discovery. + * It's fairly easy to check that no packet is lost, that the + * packets are postponed during discovery and that after + * discovery indication you have a 100ms "gap". + * As connection request and Ultra are now processed the same + * way, this avoid the tedious job of trying IrLAP connection + * in all those cases... + * Jean II */ + break; +#ifdef CONFIG_IRDA_ULTRA + case SEND_UI_FRAME: + { + int i; + /* Only allowed to repeat an operation twice */ + for (i=0; ((i<2) && (self->media_busy == FALSE)); i++) { + skb = skb_dequeue(&self->txq_ultra); + if (skb) + irlap_send_ui_frame(self, skb, CBROADCAST, + CMD_FRAME); + else + break; + /* irlap_send_ui_frame() won't increase skb reference + * count, so no dev_kfree_skb() - Jean II */ + } + if (i == 2) { + /* Force us to listen 500 ms again */ + irda_device_set_media_busy(self->netdev, TRUE); + } + break; + } + case RECV_UI_FRAME: + /* Only accept broadcast frames in NDM mode */ + if (info->caddr != CBROADCAST) { + pr_debug("%s(), not a broadcast frame!\n", + __func__); + } else + irlap_unitdata_indication(self, skb); + break; +#endif /* CONFIG_IRDA_ULTRA */ + case RECV_TEST_CMD: + /* Remove test frame header */ + skb_pull(skb, sizeof(struct test_frame)); + + /* + * Send response. This skb will not be sent out again, and + * will only be used to send out the same info as the cmd + */ + irlap_send_test_frame(self, CBROADCAST, info->daddr, skb); + break; + case RECV_TEST_RSP: + pr_debug("%s() not implemented!\n", __func__); + break; + default: + pr_debug("%s(), Unknown event %s\n", __func__, + irlap_event[event]); + + ret = -1; + break; + } + return ret; +} + +/* + * Function irlap_state_query (event, skb, info) + * + * QUERY state + * + */ +static int irlap_state_query(struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info) +{ + int ret = 0; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); + + switch (event) { + case RECV_DISCOVERY_XID_RSP: + IRDA_ASSERT(info != NULL, return -1;); + IRDA_ASSERT(info->discovery != NULL, return -1;); + + pr_debug("%s(), daddr=%08x\n", __func__, + info->discovery->data.daddr); + + if (!self->discovery_log) { + net_warn_ratelimited("%s: discovery log is gone! maybe the discovery timeout has been set too short?\n", + __func__); + break; + } + hashbin_insert(self->discovery_log, + (irda_queue_t *) info->discovery, + info->discovery->data.daddr, NULL); + + /* Keep state */ + /* irlap_next_state(self, LAP_QUERY); */ + + break; + case RECV_DISCOVERY_XID_CMD: + /* Yes, it is possible to receive those frames in this mode. + * Note that most often the last discovery request won't + * occur here but in NDM state (see my comment there). + * What should we do ? + * Not much. We are currently performing our own discovery, + * therefore we can't answer those frames. We don't want + * to change state either. We just pass the info to + * IrLMP who will put it in the log (and post an event). + * Jean II + */ + + IRDA_ASSERT(info != NULL, return -1;); + + pr_debug("%s(), Receiving discovery request (s = %d) while performing discovery :-(\n", + __func__, info->s); + + /* Last discovery request ? */ + if (info->s == 0xff) + irlap_discovery_indication(self, info->discovery); + break; + case SLOT_TIMER_EXPIRED: + /* + * Wait a little longer if we detect an incoming frame. This + * is not mentioned in the spec, but is a good thing to do, + * since we want to work even with devices that violate the + * timing requirements. + */ + if (irda_device_is_receiving(self->netdev) && !self->add_wait) { + pr_debug("%s(), device is slow to answer, waiting some more!\n", + __func__); + irlap_start_slot_timer(self, msecs_to_jiffies(10)); + self->add_wait = TRUE; + return ret; + } + self->add_wait = FALSE; + + if (self->s < self->S) { + irlap_send_discovery_xid_frame(self, self->S, + self->s, TRUE, + self->discovery_cmd); + self->s++; + irlap_start_slot_timer(self, self->slot_timeout); + + /* Keep state */ + irlap_next_state(self, LAP_QUERY); + } else { + /* This is the final slot! */ + irlap_send_discovery_xid_frame(self, self->S, 0xff, + TRUE, + self->discovery_cmd); + + /* Always switch state before calling upper layers */ + irlap_next_state(self, LAP_NDM); + + /* + * We are now finished with the discovery procedure, + * so now we must return the results + */ + irlap_discovery_confirm(self, self->discovery_log); + + /* IrLMP should now have taken care of the log */ + self->discovery_log = NULL; + } + break; + default: + pr_debug("%s(), Unknown event %s\n", __func__, + irlap_event[event]); + + ret = -1; + break; + } + return ret; +} + +/* + * Function irlap_state_reply (self, event, skb, info) + * + * REPLY, we have received a XID discovery frame from a device and we + * are waiting for the right time slot to send a response XID frame + * + */ +static int irlap_state_reply(struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info) +{ + discovery_t *discovery_rsp; + int ret=0; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); + + switch (event) { + case QUERY_TIMER_EXPIRED: + pr_debug("%s(), QUERY_TIMER_EXPIRED <%ld>\n", + __func__, jiffies); + irlap_next_state(self, LAP_NDM); + break; + case RECV_DISCOVERY_XID_CMD: + IRDA_ASSERT(info != NULL, return -1;); + /* Last frame? */ + if (info->s == 0xff) { + del_timer(&self->query_timer); + + /* info->log.condition = REMOTE; */ + + /* Always switch state before calling upper layers */ + irlap_next_state(self, LAP_NDM); + + irlap_discovery_indication(self, info->discovery); + } else { + /* If it's our slot, send our reply */ + if ((info->s >= self->slot) && (!self->frame_sent)) { + discovery_rsp = irlmp_get_discovery_response(); + discovery_rsp->data.daddr = info->daddr; + + irlap_send_discovery_xid_frame(self, info->S, + self->slot, + FALSE, + discovery_rsp); + + self->frame_sent = TRUE; + } + /* Readjust our timer to accommodate devices + * doing faster or slower discovery than us... + * Jean II */ + irlap_start_query_timer(self, info->S, info->s); + + /* Keep state */ + //irlap_next_state(self, LAP_REPLY); + } + break; + default: + pr_debug("%s(), Unknown event %d, %s\n", __func__, + event, irlap_event[event]); + + ret = -1; + break; + } + return ret; +} + +/* + * Function irlap_state_conn (event, skb, info) + * + * CONN, we have received a SNRM command and is waiting for the upper + * layer to accept or refuse connection + * + */ +static int irlap_state_conn(struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info) +{ + int ret = 0; + + pr_debug("%s(), event=%s\n", __func__, irlap_event[event]); + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); + + switch (event) { + case CONNECT_RESPONSE: + skb_pull(skb, sizeof(struct snrm_frame)); + + IRDA_ASSERT(self->netdev != NULL, return -1;); + + irlap_qos_negotiate(self, skb); + + irlap_initiate_connection_state(self); + + /* + * Applying the parameters now will make sure we change speed + * *after* we have sent the next frame + */ + irlap_apply_connection_parameters(self, FALSE); + + /* + * Sending this frame will force a speed change after it has + * been sent (i.e. the frame will be sent at 9600). + */ + irlap_send_ua_response_frame(self, &self->qos_rx); + +#if 0 + /* + * We are allowed to send two frames, but this may increase + * the connect latency, so lets not do it for now. + */ + /* This is full of good intentions, but doesn't work in + * practice. + * After sending the first UA response, we switch the + * dongle to the negotiated speed, which is usually + * different than 9600 kb/s. + * From there, there is two solutions : + * 1) The other end has received the first UA response : + * it will set up the connection, move to state LAP_NRM_P, + * and will ignore and drop the second UA response. + * Actually, it's even worse : the other side will almost + * immediately send a RR that will likely collide with the + * UA response (depending on negotiated turnaround). + * 2) The other end has not received the first UA response, + * will stay at 9600 and will never see the second UA response. + * Jean II */ + irlap_send_ua_response_frame(self, &self->qos_rx); +#endif + + /* + * The WD-timer could be set to the duration of the P-timer + * for this case, but it is recommended to use twice the + * value (note 3 IrLAP p. 60). + */ + irlap_start_wd_timer(self, self->wd_timeout); + irlap_next_state(self, LAP_NRM_S); + + break; + case RECV_DISCOVERY_XID_CMD: + pr_debug("%s(), event RECV_DISCOVER_XID_CMD!\n", + __func__); + irlap_next_state(self, LAP_NDM); + + break; + case DISCONNECT_REQUEST: + pr_debug("%s(), Disconnect request!\n", __func__); + irlap_send_dm_frame(self); + irlap_next_state( self, LAP_NDM); + irlap_disconnect_indication(self, LAP_DISC_INDICATION); + break; + default: + pr_debug("%s(), Unknown event %d, %s\n", __func__, + event, irlap_event[event]); + + ret = -1; + break; + } + + return ret; +} + +/* + * Function irlap_state_setup (event, skb, frame) + * + * SETUP state, The local layer has transmitted a SNRM command frame to + * a remote peer layer and is awaiting a reply . + * + */ +static int irlap_state_setup(struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info) +{ + int ret = 0; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); + + switch (event) { + case FINAL_TIMER_EXPIRED: + if (self->retry_count < self->N3) { +/* + * Perform random backoff, Wait a random number of time units, minimum + * duration half the time taken to transmitt a SNRM frame, maximum duration + * 1.5 times the time taken to transmit a SNRM frame. So this time should + * between 15 msecs and 45 msecs. + */ + irlap_start_backoff_timer(self, msecs_to_jiffies(20 + + (jiffies % 30))); + } else { + /* Always switch state before calling upper layers */ + irlap_next_state(self, LAP_NDM); + + irlap_disconnect_indication(self, LAP_FOUND_NONE); + } + break; + case BACKOFF_TIMER_EXPIRED: + irlap_send_snrm_frame(self, &self->qos_rx); + irlap_start_final_timer(self, self->final_timeout); + self->retry_count++; + break; + case RECV_SNRM_CMD: + pr_debug("%s(), SNRM battle!\n", __func__); + + IRDA_ASSERT(skb != NULL, return 0;); + IRDA_ASSERT(info != NULL, return 0;); + + /* + * The device with the largest device address wins the battle + * (both have sent a SNRM command!) + */ + if (info &&(info->daddr > self->saddr)) { + del_timer(&self->final_timer); + irlap_initiate_connection_state(self); + + IRDA_ASSERT(self->netdev != NULL, return -1;); + + skb_pull(skb, sizeof(struct snrm_frame)); + + irlap_qos_negotiate(self, skb); + + /* Send UA frame and then change link settings */ + irlap_apply_connection_parameters(self, FALSE); + irlap_send_ua_response_frame(self, &self->qos_rx); + + irlap_next_state(self, LAP_NRM_S); + irlap_connect_confirm(self, skb); + + /* + * The WD-timer could be set to the duration of the + * P-timer for this case, but it is recommended + * to use twice the value (note 3 IrLAP p. 60). + */ + irlap_start_wd_timer(self, self->wd_timeout); + } else { + /* We just ignore the other device! */ + irlap_next_state(self, LAP_SETUP); + } + break; + case RECV_UA_RSP: + /* Stop F-timer */ + del_timer(&self->final_timer); + + /* Initiate connection state */ + irlap_initiate_connection_state(self); + + /* Negotiate connection parameters */ + IRDA_ASSERT(skb->len > 10, return -1;); + + skb_pull(skb, sizeof(struct ua_frame)); + + IRDA_ASSERT(self->netdev != NULL, return -1;); + + irlap_qos_negotiate(self, skb); + + /* Set the new link setting *now* (before the rr frame) */ + irlap_apply_connection_parameters(self, TRUE); + self->retry_count = 0; + + /* Wait for turnaround time to give a chance to the other + * device to be ready to receive us. + * Note : the time to switch speed is typically larger + * than the turnaround time, but as we don't have the other + * side speed switch time, that's our best guess... + * Jean II */ + irlap_wait_min_turn_around(self, &self->qos_tx); + + /* This frame will actually be sent at the new speed */ + irlap_send_rr_frame(self, CMD_FRAME); + + /* The timer is set to half the normal timer to quickly + * detect a failure to negotiate the new connection + * parameters. IrLAP 6.11.3.2, note 3. + * Note that currently we don't process this failure + * properly, as we should do a quick disconnect. + * Jean II */ + irlap_start_final_timer(self, self->final_timeout/2); + irlap_next_state(self, LAP_NRM_P); + + irlap_connect_confirm(self, skb); + break; + case RECV_DM_RSP: /* FALLTHROUGH */ + case RECV_DISC_CMD: + del_timer(&self->final_timer); + irlap_next_state(self, LAP_NDM); + + irlap_disconnect_indication(self, LAP_DISC_INDICATION); + break; + default: + pr_debug("%s(), Unknown event %d, %s\n", __func__, + event, irlap_event[event]); + + ret = -1; + break; + } + return ret; +} + +/* + * Function irlap_state_offline (self, event, skb, info) + * + * OFFLINE state, not used for now! + * + */ +static int irlap_state_offline(struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info) +{ + pr_debug("%s(), Unknown event\n", __func__); + + return -1; +} + +/* + * Function irlap_state_xmit_p (self, event, skb, info) + * + * XMIT, Only the primary station has right to transmit, and we + * therefore do not expect to receive any transmissions from other + * stations. + * + */ +static int irlap_state_xmit_p(struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info) +{ + int ret = 0; + + switch (event) { + case SEND_I_CMD: + /* + * Only send frame if send-window > 0. + */ + if ((self->window > 0) && (!self->remote_busy)) { + int nextfit; +#ifdef CONFIG_IRDA_DYNAMIC_WINDOW + struct sk_buff *skb_next; + + /* With DYNAMIC_WINDOW, we keep the window size + * maximum, and adapt on the packets we are sending. + * At 115k, we can send only 2 packets of 2048 bytes + * in a 500 ms turnaround. Without this option, we + * would always limit the window to 2. With this + * option, if we send smaller packets, we can send + * up to 7 of them (always depending on QoS). + * Jean II */ + + /* Look at the next skb. This is safe, as we are + * the only consumer of the Tx queue (if we are not, + * we have other problems) - Jean II */ + skb_next = skb_peek(&self->txq); + + /* Check if a subsequent skb exist and would fit in + * the current window (with respect to turnaround + * time). + * This allow us to properly mark the current packet + * with the pf bit, to avoid falling back on the + * second test below, and avoid waiting the + * end of the window and sending a extra RR. + * Note : (skb_next != NULL) <=> (skb_queue_len() > 0) + * Jean II */ + nextfit = ((skb_next != NULL) && + ((skb_next->len + skb->len) <= + self->bytes_left)); + + /* + * The current packet may not fit ! Because of test + * above, this should not happen any more !!! + * Test if we have transmitted more bytes over the + * link than its possible to do with the current + * speed and turn-around-time. + */ + if((!nextfit) && (skb->len > self->bytes_left)) { + pr_debug("%s(), Not allowed to transmit more bytes!\n", + __func__); + /* Requeue the skb */ + skb_queue_head(&self->txq, skb_get(skb)); + /* + * We should switch state to LAP_NRM_P, but + * that is not possible since we must be sure + * that we poll the other side. Since we have + * used up our time, the poll timer should + * trigger anyway now, so we just wait for it + * DB + */ + /* + * Sorry, but that's not totally true. If + * we send 2000B packets, we may wait another + * 1000B until our turnaround expire. That's + * why we need to be proactive in avoiding + * coming here. - Jean II + */ + return -EPROTO; + } + + /* Subtract space used by this skb */ + self->bytes_left -= skb->len; +#else /* CONFIG_IRDA_DYNAMIC_WINDOW */ + /* Window has been adjusted for the max packet + * size, so much simpler... - Jean II */ + nextfit = !skb_queue_empty(&self->txq); +#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */ + /* + * Send data with poll bit cleared only if window > 1 + * and there is more frames after this one to be sent + */ + if ((self->window > 1) && (nextfit)) { + /* More packet to send in current window */ + irlap_send_data_primary(self, skb); + irlap_next_state(self, LAP_XMIT_P); + } else { + /* Final packet of window */ + irlap_send_data_primary_poll(self, skb); + + /* + * Make sure state machine does not try to send + * any more frames + */ + ret = -EPROTO; + } +#ifdef CONFIG_IRDA_FAST_RR + /* Peer may want to reply immediately */ + self->fast_RR = FALSE; +#endif /* CONFIG_IRDA_FAST_RR */ + } else { + pr_debug("%s(), Unable to send! remote busy?\n", + __func__); + skb_queue_head(&self->txq, skb_get(skb)); + + /* + * The next ret is important, because it tells + * irlap_next_state _not_ to deliver more frames + */ + ret = -EPROTO; + } + break; + case POLL_TIMER_EXPIRED: + pr_debug("%s(), POLL_TIMER_EXPIRED <%ld>\n", + __func__, jiffies); + irlap_send_rr_frame(self, CMD_FRAME); + /* Return to NRM properly - Jean II */ + self->window = self->window_size; +#ifdef CONFIG_IRDA_DYNAMIC_WINDOW + /* Allowed to transmit a maximum number of bytes again. */ + self->bytes_left = self->line_capacity; +#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */ + irlap_start_final_timer(self, self->final_timeout); + irlap_next_state(self, LAP_NRM_P); + break; + case DISCONNECT_REQUEST: + del_timer(&self->poll_timer); + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_send_disc_frame(self); + irlap_flush_all_queues(self); + irlap_start_final_timer(self, self->final_timeout); + self->retry_count = 0; + irlap_next_state(self, LAP_PCLOSE); + break; + case DATA_REQUEST: + /* Nothing to do, irlap_do_event() will send the packet + * when we return... - Jean II */ + break; + default: + pr_debug("%s(), Unknown event %s\n", + __func__, irlap_event[event]); + + ret = -EINVAL; + break; + } + return ret; +} + +/* + * Function irlap_state_pclose (event, skb, info) + * + * PCLOSE state + */ +static int irlap_state_pclose(struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info) +{ + int ret = 0; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); + + switch (event) { + case RECV_UA_RSP: /* FALLTHROUGH */ + case RECV_DM_RSP: + del_timer(&self->final_timer); + + /* Set new link parameters */ + irlap_apply_default_connection_parameters(self); + + /* Always switch state before calling upper layers */ + irlap_next_state(self, LAP_NDM); + + irlap_disconnect_indication(self, LAP_DISC_INDICATION); + break; + case FINAL_TIMER_EXPIRED: + if (self->retry_count < self->N3) { + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_send_disc_frame(self); + irlap_start_final_timer(self, self->final_timeout); + self->retry_count++; + /* Keep state */ + } else { + irlap_apply_default_connection_parameters(self); + + /* Always switch state before calling upper layers */ + irlap_next_state(self, LAP_NDM); + + irlap_disconnect_indication(self, LAP_NO_RESPONSE); + } + break; + default: + pr_debug("%s(), Unknown event %d\n", __func__, event); + + ret = -1; + break; + } + return ret; +} + +/* + * Function irlap_state_nrm_p (self, event, skb, info) + * + * NRM_P (Normal Response Mode as Primary), The primary station has given + * permissions to a secondary station to transmit IrLAP resonse frames + * (by sending a frame with the P bit set). The primary station will not + * transmit any frames and is expecting to receive frames only from the + * secondary to which transmission permissions has been given. + */ +static int irlap_state_nrm_p(struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info) +{ + int ret = 0; + int ns_status; + int nr_status; + + switch (event) { + case RECV_I_RSP: /* Optimize for the common case */ + if (unlikely(skb->len <= LAP_ADDR_HEADER + LAP_CTRL_HEADER)) { + /* + * Input validation check: a stir4200/mcp2150 + * combination sometimes results in an empty i:rsp. + * This makes no sense; we can just ignore the frame + * and send an rr:cmd immediately. This happens before + * changing nr or ns so triggers a retransmit + */ + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_send_rr_frame(self, CMD_FRAME); + /* Keep state */ + break; + } + /* FIXME: must check for remote_busy below */ +#ifdef CONFIG_IRDA_FAST_RR + /* + * Reset the fast_RR so we can use the fast RR code with + * full speed the next time since peer may have more frames + * to transmitt + */ + self->fast_RR = FALSE; +#endif /* CONFIG_IRDA_FAST_RR */ + IRDA_ASSERT( info != NULL, return -1;); + + ns_status = irlap_validate_ns_received(self, info->ns); + nr_status = irlap_validate_nr_received(self, info->nr); + + /* + * Check for expected I(nformation) frame + */ + if ((ns_status == NS_EXPECTED) && (nr_status == NR_EXPECTED)) { + + /* Update Vr (next frame for us to receive) */ + self->vr = (self->vr + 1) % 8; + + /* Update Nr received, cleanup our retry queue */ + irlap_update_nr_received(self, info->nr); + + /* + * Got expected NR, so reset the + * retry_count. This is not done by IrLAP spec, + * which is strange! + */ + self->retry_count = 0; + self->ack_required = TRUE; + + /* poll bit cleared? */ + if (!info->pf) { + /* Keep state, do not move this line */ + irlap_next_state(self, LAP_NRM_P); + + irlap_data_indication(self, skb, FALSE); + } else { + /* No longer waiting for pf */ + del_timer(&self->final_timer); + + irlap_wait_min_turn_around(self, &self->qos_tx); + + /* Call higher layer *before* changing state + * to give them a chance to send data in the + * next LAP frame. + * Jean II */ + irlap_data_indication(self, skb, FALSE); + + /* XMIT states are the most dangerous state + * to be in, because user requests are + * processed directly and may change state. + * On the other hand, in NDM_P, those + * requests are queued and we will process + * them when we return to irlap_do_event(). + * Jean II + */ + irlap_next_state(self, LAP_XMIT_P); + + /* This is the last frame. + * Make sure it's always called in XMIT state. + * - Jean II */ + irlap_start_poll_timer(self, self->poll_timeout); + } + break; + + } + /* Unexpected next to send (Ns) */ + if ((ns_status == NS_UNEXPECTED) && (nr_status == NR_EXPECTED)) + { + if (!info->pf) { + irlap_update_nr_received(self, info->nr); + + /* + * Wait until the last frame before doing + * anything + */ + + /* Keep state */ + irlap_next_state(self, LAP_NRM_P); + } else { + pr_debug("%s(), missing or duplicate frame!\n", + __func__); + + /* Update Nr received */ + irlap_update_nr_received(self, info->nr); + + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_send_rr_frame(self, CMD_FRAME); + + self->ack_required = FALSE; + + irlap_start_final_timer(self, self->final_timeout); + irlap_next_state(self, LAP_NRM_P); + } + break; + } + /* + * Unexpected next to receive (Nr) + */ + if ((ns_status == NS_EXPECTED) && (nr_status == NR_UNEXPECTED)) + { + if (info->pf) { + self->vr = (self->vr + 1) % 8; + + /* Update Nr received */ + irlap_update_nr_received(self, info->nr); + + /* Resend rejected frames */ + irlap_resend_rejected_frames(self, CMD_FRAME); + + self->ack_required = FALSE; + + /* Make sure we account for the time + * to transmit our frames. See comemnts + * in irlap_send_data_primary_poll(). + * Jean II */ + irlap_start_final_timer(self, 2 * self->final_timeout); + + /* Keep state, do not move this line */ + irlap_next_state(self, LAP_NRM_P); + + irlap_data_indication(self, skb, FALSE); + } else { + /* + * Do not resend frames until the last + * frame has arrived from the other + * device. This is not documented in + * IrLAP!! + */ + self->vr = (self->vr + 1) % 8; + + /* Update Nr received */ + irlap_update_nr_received(self, info->nr); + + self->ack_required = FALSE; + + /* Keep state, do not move this line!*/ + irlap_next_state(self, LAP_NRM_P); + + irlap_data_indication(self, skb, FALSE); + } + break; + } + /* + * Unexpected next to send (Ns) and next to receive (Nr) + * Not documented by IrLAP! + */ + if ((ns_status == NS_UNEXPECTED) && + (nr_status == NR_UNEXPECTED)) + { + pr_debug("%s(), unexpected nr and ns!\n", + __func__); + if (info->pf) { + /* Resend rejected frames */ + irlap_resend_rejected_frames(self, CMD_FRAME); + + /* Give peer some time to retransmit! + * But account for our own Tx. */ + irlap_start_final_timer(self, 2 * self->final_timeout); + + /* Keep state, do not move this line */ + irlap_next_state(self, LAP_NRM_P); + } else { + /* Update Nr received */ + /* irlap_update_nr_received( info->nr); */ + + self->ack_required = FALSE; + } + break; + } + + /* + * Invalid NR or NS + */ + if ((nr_status == NR_INVALID) || (ns_status == NS_INVALID)) { + if (info->pf) { + del_timer(&self->final_timer); + + irlap_next_state(self, LAP_RESET_WAIT); + + irlap_disconnect_indication(self, LAP_RESET_INDICATION); + self->xmitflag = TRUE; + } else { + del_timer(&self->final_timer); + + irlap_disconnect_indication(self, LAP_RESET_INDICATION); + + self->xmitflag = FALSE; + } + break; + } + pr_debug("%s(), Not implemented!\n", __func__); + pr_debug("%s(), event=%s, ns_status=%d, nr_status=%d\n", + __func__, irlap_event[event], ns_status, nr_status); + break; + case RECV_UI_FRAME: + /* Poll bit cleared? */ + if (!info->pf) { + irlap_data_indication(self, skb, TRUE); + irlap_next_state(self, LAP_NRM_P); + } else { + del_timer(&self->final_timer); + irlap_data_indication(self, skb, TRUE); + irlap_next_state(self, LAP_XMIT_P); + pr_debug("%s: RECV_UI_FRAME: next state %s\n", + __func__, irlap_state[self->state]); + irlap_start_poll_timer(self, self->poll_timeout); + } + break; + case RECV_RR_RSP: + /* + * If you get a RR, the remote isn't busy anymore, + * no matter what the NR + */ + self->remote_busy = FALSE; + + /* Stop final timer */ + del_timer(&self->final_timer); + + /* + * Nr as expected? + */ + ret = irlap_validate_nr_received(self, info->nr); + if (ret == NR_EXPECTED) { + /* Update Nr received */ + irlap_update_nr_received(self, info->nr); + + /* + * Got expected NR, so reset the retry_count. This + * is not done by the IrLAP standard , which is + * strange! DB. + */ + self->retry_count = 0; + irlap_wait_min_turn_around(self, &self->qos_tx); + + irlap_next_state(self, LAP_XMIT_P); + + /* Start poll timer */ + irlap_start_poll_timer(self, self->poll_timeout); + } else if (ret == NR_UNEXPECTED) { + IRDA_ASSERT(info != NULL, return -1;); + /* + * Unexpected nr! + */ + + /* Update Nr received */ + irlap_update_nr_received(self, info->nr); + + pr_debug("RECV_RR_FRAME: Retrans:%d, nr=%d, va=%d, vs=%d, vr=%d\n", + self->retry_count, info->nr, self->va, + self->vs, self->vr); + + /* Resend rejected frames */ + irlap_resend_rejected_frames(self, CMD_FRAME); + irlap_start_final_timer(self, self->final_timeout * 2); + + irlap_next_state(self, LAP_NRM_P); + } else if (ret == NR_INVALID) { + pr_debug("%s(), Received RR with invalid nr !\n", + __func__); + + irlap_next_state(self, LAP_RESET_WAIT); + + irlap_disconnect_indication(self, LAP_RESET_INDICATION); + self->xmitflag = TRUE; + } + break; + case RECV_RNR_RSP: + IRDA_ASSERT(info != NULL, return -1;); + + /* Stop final timer */ + del_timer(&self->final_timer); + self->remote_busy = TRUE; + + /* Update Nr received */ + irlap_update_nr_received(self, info->nr); + irlap_next_state(self, LAP_XMIT_P); + + /* Start poll timer */ + irlap_start_poll_timer(self, self->poll_timeout); + break; + case RECV_FRMR_RSP: + del_timer(&self->final_timer); + self->xmitflag = TRUE; + irlap_next_state(self, LAP_RESET_WAIT); + irlap_reset_indication(self); + break; + case FINAL_TIMER_EXPIRED: + /* + * We are allowed to wait for additional 300 ms if + * final timer expires when we are in the middle + * of receiving a frame (page 45, IrLAP). Check that + * we only do this once for each frame. + */ + if (irda_device_is_receiving(self->netdev) && !self->add_wait) { + pr_debug("FINAL_TIMER_EXPIRED when receiving a frame! Waiting a little bit more!\n"); + irlap_start_final_timer(self, msecs_to_jiffies(300)); + + /* + * Don't allow this to happen one more time in a row, + * or else we can get a pretty tight loop here if + * if we only receive half a frame. DB. + */ + self->add_wait = TRUE; + break; + } + self->add_wait = FALSE; + + /* N2 is the disconnect timer. Until we reach it, we retry */ + if (self->retry_count < self->N2) { + if (skb_peek(&self->wx_list) == NULL) { + /* Retry sending the pf bit to the secondary */ + pr_debug("nrm_p: resending rr"); + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_send_rr_frame(self, CMD_FRAME); + } else { + pr_debug("nrm_p: resend frames"); + irlap_resend_rejected_frames(self, CMD_FRAME); + } + + irlap_start_final_timer(self, self->final_timeout); + self->retry_count++; + pr_debug("irlap_state_nrm_p: FINAL_TIMER_EXPIRED: retry_count=%d\n", + self->retry_count); + + /* Early warning event. I'm using a pretty liberal + * interpretation of the spec and generate an event + * every time the timer is multiple of N1 (and not + * only the first time). This allow application + * to know precisely if connectivity restart... + * Jean II */ + if((self->retry_count % self->N1) == 0) + irlap_status_indication(self, + STATUS_NO_ACTIVITY); + + /* Keep state */ + } else { + irlap_apply_default_connection_parameters(self); + + /* Always switch state before calling upper layers */ + irlap_next_state(self, LAP_NDM); + irlap_disconnect_indication(self, LAP_NO_RESPONSE); + } + break; + case RECV_REJ_RSP: + irlap_update_nr_received(self, info->nr); + if (self->remote_busy) { + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_send_rr_frame(self, CMD_FRAME); + } else + irlap_resend_rejected_frames(self, CMD_FRAME); + irlap_start_final_timer(self, 2 * self->final_timeout); + break; + case RECV_SREJ_RSP: + irlap_update_nr_received(self, info->nr); + if (self->remote_busy) { + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_send_rr_frame(self, CMD_FRAME); + } else + irlap_resend_rejected_frame(self, CMD_FRAME); + irlap_start_final_timer(self, 2 * self->final_timeout); + break; + case RECV_RD_RSP: + pr_debug("%s(), RECV_RD_RSP\n", __func__); + + irlap_flush_all_queues(self); + irlap_next_state(self, LAP_XMIT_P); + /* Call back the LAP state machine to do a proper disconnect */ + irlap_disconnect_request(self); + break; + default: + pr_debug("%s(), Unknown event %s\n", + __func__, irlap_event[event]); + + ret = -1; + break; + } + return ret; +} + +/* + * Function irlap_state_reset_wait (event, skb, info) + * + * We have informed the service user of a reset condition, and is + * awaiting reset of disconnect request. + * + */ +static int irlap_state_reset_wait(struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info) +{ + int ret = 0; + + pr_debug("%s(), event = %s\n", __func__, irlap_event[event]); + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); + + switch (event) { + case RESET_REQUEST: + if (self->xmitflag) { + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_send_snrm_frame(self, NULL); + irlap_start_final_timer(self, self->final_timeout); + irlap_next_state(self, LAP_RESET); + } else { + irlap_start_final_timer(self, self->final_timeout); + irlap_next_state(self, LAP_RESET); + } + break; + case DISCONNECT_REQUEST: + irlap_wait_min_turn_around( self, &self->qos_tx); + irlap_send_disc_frame( self); + irlap_flush_all_queues( self); + irlap_start_final_timer( self, self->final_timeout); + self->retry_count = 0; + irlap_next_state( self, LAP_PCLOSE); + break; + default: + pr_debug("%s(), Unknown event %s\n", __func__, + irlap_event[event]); + + ret = -1; + break; + } + return ret; +} + +/* + * Function irlap_state_reset (self, event, skb, info) + * + * We have sent a SNRM reset command to the peer layer, and is awaiting + * reply. + * + */ +static int irlap_state_reset(struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info) +{ + int ret = 0; + + pr_debug("%s(), event = %s\n", __func__, irlap_event[event]); + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); + + switch (event) { + case RECV_DISC_CMD: + del_timer(&self->final_timer); + + irlap_apply_default_connection_parameters(self); + + /* Always switch state before calling upper layers */ + irlap_next_state(self, LAP_NDM); + + irlap_disconnect_indication(self, LAP_NO_RESPONSE); + + break; + case RECV_UA_RSP: + del_timer(&self->final_timer); + + /* Initiate connection state */ + irlap_initiate_connection_state(self); + + irlap_reset_confirm(); + + self->remote_busy = FALSE; + + irlap_next_state(self, LAP_XMIT_P); + + irlap_start_poll_timer(self, self->poll_timeout); + + break; + case FINAL_TIMER_EXPIRED: + if (self->retry_count < 3) { + irlap_wait_min_turn_around(self, &self->qos_tx); + + IRDA_ASSERT(self->netdev != NULL, return -1;); + irlap_send_snrm_frame(self, self->qos_dev); + + self->retry_count++; /* Experimental!! */ + + irlap_start_final_timer(self, self->final_timeout); + irlap_next_state(self, LAP_RESET); + } else if (self->retry_count >= self->N3) { + irlap_apply_default_connection_parameters(self); + + /* Always switch state before calling upper layers */ + irlap_next_state(self, LAP_NDM); + + irlap_disconnect_indication(self, LAP_NO_RESPONSE); + } + break; + case RECV_SNRM_CMD: + /* + * SNRM frame is not allowed to contain an I-field in this + * state + */ + if (!info) { + pr_debug("%s(), RECV_SNRM_CMD\n", __func__); + irlap_initiate_connection_state(self); + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_send_ua_response_frame(self, &self->qos_rx); + irlap_reset_confirm(); + irlap_start_wd_timer(self, self->wd_timeout); + irlap_next_state(self, LAP_NDM); + } else { + pr_debug("%s(), SNRM frame contained an I field!\n", + __func__); + } + break; + default: + pr_debug("%s(), Unknown event %s\n", + __func__, irlap_event[event]); + + ret = -1; + break; + } + return ret; +} + +/* + * Function irlap_state_xmit_s (event, skb, info) + * + * XMIT_S, The secondary station has been given the right to transmit, + * and we therefore do not expect to receive any transmissions from other + * stations. + */ +static int irlap_state_xmit_s(struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info) +{ + int ret = 0; + + pr_debug("%s(), event=%s\n", __func__, irlap_event[event]); + + IRDA_ASSERT(self != NULL, return -ENODEV;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return -EBADR;); + + switch (event) { + case SEND_I_CMD: + /* + * Send frame only if send window > 0 + */ + if ((self->window > 0) && (!self->remote_busy)) { + int nextfit; +#ifdef CONFIG_IRDA_DYNAMIC_WINDOW + struct sk_buff *skb_next; + + /* + * Same deal as in irlap_state_xmit_p(), so see + * the comments at that point. + * We are the secondary, so there are only subtle + * differences. - Jean II + */ + + /* Check if a subsequent skb exist and would fit in + * the current window (with respect to turnaround + * time). - Jean II */ + skb_next = skb_peek(&self->txq); + nextfit = ((skb_next != NULL) && + ((skb_next->len + skb->len) <= + self->bytes_left)); + + /* + * Test if we have transmitted more bytes over the + * link than its possible to do with the current + * speed and turn-around-time. + */ + if((!nextfit) && (skb->len > self->bytes_left)) { + pr_debug("%s(), Not allowed to transmit more bytes!\n", + __func__); + /* Requeue the skb */ + skb_queue_head(&self->txq, skb_get(skb)); + + /* + * Switch to NRM_S, this is only possible + * when we are in secondary mode, since we + * must be sure that we don't miss any RR + * frames + */ + self->window = self->window_size; + self->bytes_left = self->line_capacity; + irlap_start_wd_timer(self, self->wd_timeout); + + irlap_next_state(self, LAP_NRM_S); + /* Slight difference with primary : + * here we would wait for the other side to + * expire the turnaround. - Jean II */ + + return -EPROTO; /* Try again later */ + } + /* Subtract space used by this skb */ + self->bytes_left -= skb->len; +#else /* CONFIG_IRDA_DYNAMIC_WINDOW */ + /* Window has been adjusted for the max packet + * size, so much simpler... - Jean II */ + nextfit = !skb_queue_empty(&self->txq); +#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */ + /* + * Send data with final bit cleared only if window > 1 + * and there is more frames to be sent + */ + if ((self->window > 1) && (nextfit)) { + irlap_send_data_secondary(self, skb); + irlap_next_state(self, LAP_XMIT_S); + } else { + irlap_send_data_secondary_final(self, skb); + irlap_next_state(self, LAP_NRM_S); + + /* + * Make sure state machine does not try to send + * any more frames + */ + ret = -EPROTO; + } + } else { + pr_debug("%s(), Unable to send!\n", __func__); + skb_queue_head(&self->txq, skb_get(skb)); + ret = -EPROTO; + } + break; + case DISCONNECT_REQUEST: + irlap_send_rd_frame(self); + irlap_flush_all_queues(self); + irlap_start_wd_timer(self, self->wd_timeout); + irlap_next_state(self, LAP_SCLOSE); + break; + case DATA_REQUEST: + /* Nothing to do, irlap_do_event() will send the packet + * when we return... - Jean II */ + break; + default: + pr_debug("%s(), Unknown event %s\n", __func__, + irlap_event[event]); + + ret = -EINVAL; + break; + } + return ret; +} + +/* + * Function irlap_state_nrm_s (event, skb, info) + * + * NRM_S (Normal Response Mode as Secondary) state, in this state we are + * expecting to receive frames from the primary station + * + */ +static int irlap_state_nrm_s(struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info) +{ + int ns_status; + int nr_status; + int ret = 0; + + pr_debug("%s(), event=%s\n", __func__, irlap_event[event]); + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); + + switch (event) { + case RECV_I_CMD: /* Optimize for the common case */ + /* FIXME: must check for remote_busy below */ + pr_debug("%s(), event=%s nr=%d, vs=%d, ns=%d, vr=%d, pf=%d\n", + __func__, irlap_event[event], info->nr, + self->vs, info->ns, self->vr, info->pf); + + self->retry_count = 0; + + ns_status = irlap_validate_ns_received(self, info->ns); + nr_status = irlap_validate_nr_received(self, info->nr); + /* + * Check for expected I(nformation) frame + */ + if ((ns_status == NS_EXPECTED) && (nr_status == NR_EXPECTED)) { + + /* Update Vr (next frame for us to receive) */ + self->vr = (self->vr + 1) % 8; + + /* Update Nr received */ + irlap_update_nr_received(self, info->nr); + + /* + * poll bit cleared? + */ + if (!info->pf) { + + self->ack_required = TRUE; + + /* + * Starting WD-timer here is optional, but + * not recommended. Note 6 IrLAP p. 83 + */ +#if 0 + irda_start_timer(WD_TIMER, self->wd_timeout); +#endif + /* Keep state, do not move this line */ + irlap_next_state(self, LAP_NRM_S); + + irlap_data_indication(self, skb, FALSE); + break; + } else { + /* + * We should wait before sending RR, and + * also before changing to XMIT_S + * state. (note 1, IrLAP p. 82) + */ + irlap_wait_min_turn_around(self, &self->qos_tx); + + /* + * Give higher layers a chance to + * immediately reply with some data before + * we decide if we should send a RR frame + * or not + */ + irlap_data_indication(self, skb, FALSE); + + /* Any pending data requests? */ + if (!skb_queue_empty(&self->txq) && + (self->window > 0)) + { + self->ack_required = TRUE; + + del_timer(&self->wd_timer); + + irlap_next_state(self, LAP_XMIT_S); + } else { + irlap_send_rr_frame(self, RSP_FRAME); + irlap_start_wd_timer(self, + self->wd_timeout); + + /* Keep the state */ + irlap_next_state(self, LAP_NRM_S); + } + break; + } + } + /* + * Check for Unexpected next to send (Ns) + */ + if ((ns_status == NS_UNEXPECTED) && (nr_status == NR_EXPECTED)) + { + /* Unexpected next to send, with final bit cleared */ + if (!info->pf) { + irlap_update_nr_received(self, info->nr); + + irlap_start_wd_timer(self, self->wd_timeout); + } else { + /* Update Nr received */ + irlap_update_nr_received(self, info->nr); + + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_send_rr_frame(self, RSP_FRAME); + + irlap_start_wd_timer(self, self->wd_timeout); + } + break; + } + + /* + * Unexpected Next to Receive(NR) ? + */ + if ((ns_status == NS_EXPECTED) && (nr_status == NR_UNEXPECTED)) + { + if (info->pf) { + pr_debug("RECV_I_RSP: frame(s) lost\n"); + + self->vr = (self->vr + 1) % 8; + + /* Update Nr received */ + irlap_update_nr_received(self, info->nr); + + /* Resend rejected frames */ + irlap_resend_rejected_frames(self, RSP_FRAME); + + /* Keep state, do not move this line */ + irlap_next_state(self, LAP_NRM_S); + + irlap_data_indication(self, skb, FALSE); + irlap_start_wd_timer(self, self->wd_timeout); + break; + } + /* + * This is not documented in IrLAP!! Unexpected NR + * with poll bit cleared + */ + if (!info->pf) { + self->vr = (self->vr + 1) % 8; + + /* Update Nr received */ + irlap_update_nr_received(self, info->nr); + + /* Keep state, do not move this line */ + irlap_next_state(self, LAP_NRM_S); + + irlap_data_indication(self, skb, FALSE); + irlap_start_wd_timer(self, self->wd_timeout); + } + break; + } + + if (ret == NR_INVALID) { + pr_debug("NRM_S, NR_INVALID not implemented!\n"); + } + if (ret == NS_INVALID) { + pr_debug("NRM_S, NS_INVALID not implemented!\n"); + } + break; + case RECV_UI_FRAME: + /* + * poll bit cleared? + */ + if (!info->pf) { + irlap_data_indication(self, skb, TRUE); + irlap_next_state(self, LAP_NRM_S); /* Keep state */ + } else { + /* + * Any pending data requests? + */ + if (!skb_queue_empty(&self->txq) && + (self->window > 0) && !self->remote_busy) + { + irlap_data_indication(self, skb, TRUE); + + del_timer(&self->wd_timer); + + irlap_next_state(self, LAP_XMIT_S); + } else { + irlap_data_indication(self, skb, TRUE); + + irlap_wait_min_turn_around(self, &self->qos_tx); + + irlap_send_rr_frame(self, RSP_FRAME); + self->ack_required = FALSE; + + irlap_start_wd_timer(self, self->wd_timeout); + + /* Keep the state */ + irlap_next_state(self, LAP_NRM_S); + } + } + break; + case RECV_RR_CMD: + self->retry_count = 0; + + /* + * Nr as expected? + */ + nr_status = irlap_validate_nr_received(self, info->nr); + if (nr_status == NR_EXPECTED) { + if (!skb_queue_empty(&self->txq) && + (self->window > 0)) { + self->remote_busy = FALSE; + + /* Update Nr received */ + irlap_update_nr_received(self, info->nr); + del_timer(&self->wd_timer); + + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_next_state(self, LAP_XMIT_S); + } else { + self->remote_busy = FALSE; + /* Update Nr received */ + irlap_update_nr_received(self, info->nr); + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_start_wd_timer(self, self->wd_timeout); + + /* Note : if the link is idle (this case), + * we never go in XMIT_S, so we never get a + * chance to process any DISCONNECT_REQUEST. + * Do it now ! - Jean II */ + if (self->disconnect_pending) { + /* Disconnect */ + irlap_send_rd_frame(self); + irlap_flush_all_queues(self); + + irlap_next_state(self, LAP_SCLOSE); + } else { + /* Just send back pf bit */ + irlap_send_rr_frame(self, RSP_FRAME); + + irlap_next_state(self, LAP_NRM_S); + } + } + } else if (nr_status == NR_UNEXPECTED) { + self->remote_busy = FALSE; + irlap_update_nr_received(self, info->nr); + irlap_resend_rejected_frames(self, RSP_FRAME); + + irlap_start_wd_timer(self, self->wd_timeout); + + /* Keep state */ + irlap_next_state(self, LAP_NRM_S); + } else { + pr_debug("%s(), invalid nr not implemented!\n", + __func__); + } + break; + case RECV_SNRM_CMD: + /* SNRM frame is not allowed to contain an I-field */ + if (!info) { + del_timer(&self->wd_timer); + pr_debug("%s(), received SNRM cmd\n", __func__); + irlap_next_state(self, LAP_RESET_CHECK); + + irlap_reset_indication(self); + } else { + pr_debug("%s(), SNRM frame contained an I-field!\n", + __func__); + + } + break; + case RECV_REJ_CMD: + irlap_update_nr_received(self, info->nr); + if (self->remote_busy) { + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_send_rr_frame(self, RSP_FRAME); + } else + irlap_resend_rejected_frames(self, RSP_FRAME); + irlap_start_wd_timer(self, self->wd_timeout); + break; + case RECV_SREJ_CMD: + irlap_update_nr_received(self, info->nr); + if (self->remote_busy) { + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_send_rr_frame(self, RSP_FRAME); + } else + irlap_resend_rejected_frame(self, RSP_FRAME); + irlap_start_wd_timer(self, self->wd_timeout); + break; + case WD_TIMER_EXPIRED: + /* + * Wait until retry_count * n matches negotiated threshold/ + * disconnect time (note 2 in IrLAP p. 82) + * + * Similar to irlap_state_nrm_p() -> FINAL_TIMER_EXPIRED + * Note : self->wd_timeout = (self->final_timeout * 2), + * which explain why we use (self->N2 / 2) here !!! + * Jean II + */ + pr_debug("%s(), retry_count = %d\n", __func__, + self->retry_count); + + if (self->retry_count < (self->N2 / 2)) { + /* No retry, just wait for primary */ + irlap_start_wd_timer(self, self->wd_timeout); + self->retry_count++; + + if((self->retry_count % (self->N1 / 2)) == 0) + irlap_status_indication(self, + STATUS_NO_ACTIVITY); + } else { + irlap_apply_default_connection_parameters(self); + + /* Always switch state before calling upper layers */ + irlap_next_state(self, LAP_NDM); + irlap_disconnect_indication(self, LAP_NO_RESPONSE); + } + break; + case RECV_DISC_CMD: + /* Always switch state before calling upper layers */ + irlap_next_state(self, LAP_NDM); + + /* Send disconnect response */ + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_send_ua_response_frame(self, NULL); + + del_timer(&self->wd_timer); + irlap_flush_all_queues(self); + /* Set default link parameters */ + irlap_apply_default_connection_parameters(self); + + irlap_disconnect_indication(self, LAP_DISC_INDICATION); + break; + case RECV_DISCOVERY_XID_CMD: + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_send_rr_frame(self, RSP_FRAME); + self->ack_required = TRUE; + irlap_start_wd_timer(self, self->wd_timeout); + irlap_next_state(self, LAP_NRM_S); + + break; + case RECV_TEST_CMD: + /* Remove test frame header (only LAP header in NRM) */ + skb_pull(skb, LAP_ADDR_HEADER + LAP_CTRL_HEADER); + + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_start_wd_timer(self, self->wd_timeout); + + /* Send response (info will be copied) */ + irlap_send_test_frame(self, self->caddr, info->daddr, skb); + break; + default: + pr_debug("%s(), Unknown event %d, (%s)\n", __func__, + event, irlap_event[event]); + + ret = -EINVAL; + break; + } + return ret; +} + +/* + * Function irlap_state_sclose (self, event, skb, info) + */ +static int irlap_state_sclose(struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, struct irlap_info *info) +{ + IRDA_ASSERT(self != NULL, return -ENODEV;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return -EBADR;); + + switch (event) { + case RECV_DISC_CMD: + /* Always switch state before calling upper layers */ + irlap_next_state(self, LAP_NDM); + + /* Send disconnect response */ + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_send_ua_response_frame(self, NULL); + + del_timer(&self->wd_timer); + /* Set default link parameters */ + irlap_apply_default_connection_parameters(self); + + irlap_disconnect_indication(self, LAP_DISC_INDICATION); + break; + case RECV_DM_RSP: + /* IrLAP-1.1 p.82: in SCLOSE, S and I type RSP frames + * shall take us down into default NDM state, like DM_RSP + */ + case RECV_RR_RSP: + case RECV_RNR_RSP: + case RECV_REJ_RSP: + case RECV_SREJ_RSP: + case RECV_I_RSP: + /* Always switch state before calling upper layers */ + irlap_next_state(self, LAP_NDM); + + del_timer(&self->wd_timer); + irlap_apply_default_connection_parameters(self); + + irlap_disconnect_indication(self, LAP_DISC_INDICATION); + break; + case WD_TIMER_EXPIRED: + /* Always switch state before calling upper layers */ + irlap_next_state(self, LAP_NDM); + + irlap_apply_default_connection_parameters(self); + + irlap_disconnect_indication(self, LAP_DISC_INDICATION); + break; + default: + /* IrLAP-1.1 p.82: in SCLOSE, basically any received frame + * with pf=1 shall restart the wd-timer and resend the rd:rsp + */ + if (info != NULL && info->pf) { + del_timer(&self->wd_timer); + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_send_rd_frame(self); + irlap_start_wd_timer(self, self->wd_timeout); + break; /* stay in SCLOSE */ + } + + pr_debug("%s(), Unknown event %d, (%s)\n", __func__, + event, irlap_event[event]); + + break; + } + + return -1; +} + +static int irlap_state_reset_check( struct irlap_cb *self, IRLAP_EVENT event, + struct sk_buff *skb, + struct irlap_info *info) +{ + int ret = 0; + + pr_debug("%s(), event=%s\n", __func__, irlap_event[event]); + + IRDA_ASSERT(self != NULL, return -ENODEV;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return -EBADR;); + + switch (event) { + case RESET_RESPONSE: + irlap_send_ua_response_frame(self, &self->qos_rx); + irlap_initiate_connection_state(self); + irlap_start_wd_timer(self, WD_TIMEOUT); + irlap_flush_all_queues(self); + + irlap_next_state(self, LAP_NRM_S); + break; + case DISCONNECT_REQUEST: + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_send_rd_frame(self); + irlap_start_wd_timer(self, WD_TIMEOUT); + irlap_next_state(self, LAP_SCLOSE); + break; + default: + pr_debug("%s(), Unknown event %d, (%s)\n", __func__, + event, irlap_event[event]); + + ret = -EINVAL; + break; + } + return ret; +} diff --git a/kernel/net/irda/irlap_frame.c b/kernel/net/irda/irlap_frame.c new file mode 100644 index 000000000..b936b1251 --- /dev/null +++ b/kernel/net/irda/irlap_frame.c @@ -0,0 +1,1411 @@ +/********************************************************************* + * + * Filename: irlap_frame.c + * Version: 1.0 + * Description: Build and transmit IrLAP frames + * Status: Stable + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Tue Aug 19 10:27:26 1997 + * Modified at: Wed Jan 5 08:59:04 2000 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>, + * All Rights Reserved. + * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/skbuff.h> +#include <linux/if.h> +#include <linux/if_ether.h> +#include <linux/netdevice.h> +#include <linux/irda.h> +#include <linux/slab.h> + +#include <net/pkt_sched.h> +#include <net/sock.h> + +#include <asm/byteorder.h> + +#include <net/irda/irda.h> +#include <net/irda/irda_device.h> +#include <net/irda/irlap.h> +#include <net/irda/wrapper.h> +#include <net/irda/timer.h> +#include <net/irda/irlap_frame.h> +#include <net/irda/qos.h> + +static void irlap_send_i_frame(struct irlap_cb *self, struct sk_buff *skb, + int command); + +/* + * Function irlap_insert_info (self, skb) + * + * Insert minimum turnaround time and speed information into the skb. We + * need to do this since it's per packet relevant information. Safe to + * have this function inlined since it's only called from one place + */ +static inline void irlap_insert_info(struct irlap_cb *self, + struct sk_buff *skb) +{ + struct irda_skb_cb *cb = (struct irda_skb_cb *) skb->cb; + + /* + * Insert MTT (min. turn time) and speed into skb, so that the + * device driver knows which settings to use + */ + cb->magic = LAP_MAGIC; + cb->mtt = self->mtt_required; + cb->next_speed = self->speed; + + /* Reset */ + self->mtt_required = 0; + + /* + * Delay equals negotiated BOFs count, plus the number of BOFs to + * force the negotiated minimum turnaround time + */ + cb->xbofs = self->bofs_count; + cb->next_xbofs = self->next_bofs; + cb->xbofs_delay = self->xbofs_delay; + + /* Reset XBOF's delay (used only for getting min turn time) */ + self->xbofs_delay = 0; + /* Put the correct xbofs value for the next packet */ + self->bofs_count = self->next_bofs; +} + +/* + * Function irlap_queue_xmit (self, skb) + * + * A little wrapper for dev_queue_xmit, so we can insert some common + * code into it. + */ +void irlap_queue_xmit(struct irlap_cb *self, struct sk_buff *skb) +{ + /* Some common init stuff */ + skb->dev = self->netdev; + skb_reset_mac_header(skb); + skb_reset_network_header(skb); + skb_reset_transport_header(skb); + skb->protocol = htons(ETH_P_IRDA); + skb->priority = TC_PRIO_BESTEFFORT; + + irlap_insert_info(self, skb); + + if (unlikely(self->mode & IRDA_MODE_MONITOR)) { + pr_debug("%s(): %s is in monitor mode\n", __func__, + self->netdev->name); + dev_kfree_skb(skb); + return; + } + + dev_queue_xmit(skb); +} + +/* + * Function irlap_send_snrm_cmd (void) + * + * Transmits a connect SNRM command frame + */ +void irlap_send_snrm_frame(struct irlap_cb *self, struct qos_info *qos) +{ + struct sk_buff *tx_skb; + struct snrm_frame *frame; + int ret; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + /* Allocate frame */ + tx_skb = alloc_skb(sizeof(struct snrm_frame) + + IRLAP_NEGOCIATION_PARAMS_LEN, + GFP_ATOMIC); + if (!tx_skb) + return; + + frame = (struct snrm_frame *) skb_put(tx_skb, 2); + + /* Insert connection address field */ + if (qos) + frame->caddr = CMD_FRAME | CBROADCAST; + else + frame->caddr = CMD_FRAME | self->caddr; + + /* Insert control field */ + frame->control = SNRM_CMD | PF_BIT; + + /* + * If we are establishing a connection then insert QoS parameters + */ + if (qos) { + skb_put(tx_skb, 9); /* 25 left */ + frame->saddr = cpu_to_le32(self->saddr); + frame->daddr = cpu_to_le32(self->daddr); + + frame->ncaddr = self->caddr; + + ret = irlap_insert_qos_negotiation_params(self, tx_skb); + if (ret < 0) { + dev_kfree_skb(tx_skb); + return; + } + } + irlap_queue_xmit(self, tx_skb); +} + +/* + * Function irlap_recv_snrm_cmd (skb, info) + * + * Received SNRM (Set Normal Response Mode) command frame + * + */ +static void irlap_recv_snrm_cmd(struct irlap_cb *self, struct sk_buff *skb, + struct irlap_info *info) +{ + struct snrm_frame *frame; + + if (pskb_may_pull(skb,sizeof(struct snrm_frame))) { + frame = (struct snrm_frame *) skb->data; + + /* Copy the new connection address ignoring the C/R bit */ + info->caddr = frame->ncaddr & 0xFE; + + /* Check if the new connection address is valid */ + if ((info->caddr == 0x00) || (info->caddr == 0xfe)) { + pr_debug("%s(), invalid connection address!\n", + __func__); + return; + } + + /* Copy peer device address */ + info->daddr = le32_to_cpu(frame->saddr); + info->saddr = le32_to_cpu(frame->daddr); + + /* Only accept if addressed directly to us */ + if (info->saddr != self->saddr) { + pr_debug("%s(), not addressed to us!\n", + __func__); + return; + } + irlap_do_event(self, RECV_SNRM_CMD, skb, info); + } else { + /* Signal that this SNRM frame does not contain and I-field */ + irlap_do_event(self, RECV_SNRM_CMD, skb, NULL); + } +} + +/* + * Function irlap_send_ua_response_frame (qos) + * + * Send UA (Unnumbered Acknowledgement) frame + * + */ +void irlap_send_ua_response_frame(struct irlap_cb *self, struct qos_info *qos) +{ + struct sk_buff *tx_skb; + struct ua_frame *frame; + int ret; + + pr_debug("%s() <%ld>\n", __func__, jiffies); + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + /* Allocate frame */ + tx_skb = alloc_skb(sizeof(struct ua_frame) + + IRLAP_NEGOCIATION_PARAMS_LEN, + GFP_ATOMIC); + if (!tx_skb) + return; + + frame = (struct ua_frame *) skb_put(tx_skb, 10); + + /* Build UA response */ + frame->caddr = self->caddr; + frame->control = UA_RSP | PF_BIT; + + frame->saddr = cpu_to_le32(self->saddr); + frame->daddr = cpu_to_le32(self->daddr); + + /* Should we send QoS negotiation parameters? */ + if (qos) { + ret = irlap_insert_qos_negotiation_params(self, tx_skb); + if (ret < 0) { + dev_kfree_skb(tx_skb); + return; + } + } + + irlap_queue_xmit(self, tx_skb); +} + + +/* + * Function irlap_send_dm_frame (void) + * + * Send disconnected mode (DM) frame + * + */ +void irlap_send_dm_frame( struct irlap_cb *self) +{ + struct sk_buff *tx_skb = NULL; + struct dm_frame *frame; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + tx_skb = alloc_skb(sizeof(struct dm_frame), GFP_ATOMIC); + if (!tx_skb) + return; + + frame = (struct dm_frame *)skb_put(tx_skb, 2); + + if (self->state == LAP_NDM) + frame->caddr = CBROADCAST; + else + frame->caddr = self->caddr; + + frame->control = DM_RSP | PF_BIT; + + irlap_queue_xmit(self, tx_skb); +} + +/* + * Function irlap_send_disc_frame (void) + * + * Send disconnect (DISC) frame + * + */ +void irlap_send_disc_frame(struct irlap_cb *self) +{ + struct sk_buff *tx_skb = NULL; + struct disc_frame *frame; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + tx_skb = alloc_skb(sizeof(struct disc_frame), GFP_ATOMIC); + if (!tx_skb) + return; + + frame = (struct disc_frame *)skb_put(tx_skb, 2); + + frame->caddr = self->caddr | CMD_FRAME; + frame->control = DISC_CMD | PF_BIT; + + irlap_queue_xmit(self, tx_skb); +} + +/* + * Function irlap_send_discovery_xid_frame (S, s, command) + * + * Build and transmit a XID (eXchange station IDentifier) discovery + * frame. + */ +void irlap_send_discovery_xid_frame(struct irlap_cb *self, int S, __u8 s, + __u8 command, discovery_t *discovery) +{ + struct sk_buff *tx_skb = NULL; + struct xid_frame *frame; + __u32 bcast = BROADCAST; + __u8 *info; + + pr_debug("%s(), s=%d, S=%d, command=%d\n", __func__, + s, S, command); + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + IRDA_ASSERT(discovery != NULL, return;); + + tx_skb = alloc_skb(sizeof(struct xid_frame) + IRLAP_DISCOVERY_INFO_LEN, + GFP_ATOMIC); + if (!tx_skb) + return; + + skb_put(tx_skb, 14); + frame = (struct xid_frame *) tx_skb->data; + + if (command) { + frame->caddr = CBROADCAST | CMD_FRAME; + frame->control = XID_CMD | PF_BIT; + } else { + frame->caddr = CBROADCAST; + frame->control = XID_RSP | PF_BIT; + } + frame->ident = XID_FORMAT; + + frame->saddr = cpu_to_le32(self->saddr); + + if (command) + frame->daddr = cpu_to_le32(bcast); + else + frame->daddr = cpu_to_le32(discovery->data.daddr); + + switch (S) { + case 1: + frame->flags = 0x00; + break; + case 6: + frame->flags = 0x01; + break; + case 8: + frame->flags = 0x02; + break; + case 16: + frame->flags = 0x03; + break; + default: + frame->flags = 0x02; + break; + } + + frame->slotnr = s; + frame->version = 0x00; + + /* + * Provide info for final slot only in commands, and for all + * responses. Send the second byte of the hint only if the + * EXTENSION bit is set in the first byte. + */ + if (!command || (frame->slotnr == 0xff)) { + int len; + + if (discovery->data.hints[0] & HINT_EXTENSION) { + info = skb_put(tx_skb, 2); + info[0] = discovery->data.hints[0]; + info[1] = discovery->data.hints[1]; + } else { + info = skb_put(tx_skb, 1); + info[0] = discovery->data.hints[0]; + } + info = skb_put(tx_skb, 1); + info[0] = discovery->data.charset; + + len = IRDA_MIN(discovery->name_len, skb_tailroom(tx_skb)); + info = skb_put(tx_skb, len); + memcpy(info, discovery->data.info, len); + } + irlap_queue_xmit(self, tx_skb); +} + +/* + * Function irlap_recv_discovery_xid_rsp (skb, info) + * + * Received a XID discovery response + * + */ +static void irlap_recv_discovery_xid_rsp(struct irlap_cb *self, + struct sk_buff *skb, + struct irlap_info *info) +{ + struct xid_frame *xid; + discovery_t *discovery = NULL; + __u8 *discovery_info; + char *text; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + if (!pskb_may_pull(skb, sizeof(struct xid_frame))) { + net_err_ratelimited("%s: frame too short!\n", __func__); + return; + } + + xid = (struct xid_frame *) skb->data; + + info->daddr = le32_to_cpu(xid->saddr); + info->saddr = le32_to_cpu(xid->daddr); + + /* Make sure frame is addressed to us */ + if ((info->saddr != self->saddr) && (info->saddr != BROADCAST)) { + pr_debug("%s(), frame is not addressed to us!\n", + __func__); + return; + } + + if ((discovery = kzalloc(sizeof(discovery_t), GFP_ATOMIC)) == NULL) { + net_warn_ratelimited("%s: kmalloc failed!\n", __func__); + return; + } + + discovery->data.daddr = info->daddr; + discovery->data.saddr = self->saddr; + discovery->timestamp = jiffies; + + pr_debug("%s(), daddr=%08x\n", __func__, + discovery->data.daddr); + + discovery_info = skb_pull(skb, sizeof(struct xid_frame)); + + /* Get info returned from peer */ + discovery->data.hints[0] = discovery_info[0]; + if (discovery_info[0] & HINT_EXTENSION) { + pr_debug("EXTENSION\n"); + discovery->data.hints[1] = discovery_info[1]; + discovery->data.charset = discovery_info[2]; + text = (char *) &discovery_info[3]; + } else { + discovery->data.hints[1] = 0; + discovery->data.charset = discovery_info[1]; + text = (char *) &discovery_info[2]; + } + /* + * Terminate info string, should be safe since this is where the + * FCS bytes resides. + */ + skb->data[skb->len] = '\0'; + strncpy(discovery->data.info, text, NICKNAME_MAX_LEN); + discovery->name_len = strlen(discovery->data.info); + + info->discovery = discovery; + + irlap_do_event(self, RECV_DISCOVERY_XID_RSP, skb, info); +} + +/* + * Function irlap_recv_discovery_xid_cmd (skb, info) + * + * Received a XID discovery command + * + */ +static void irlap_recv_discovery_xid_cmd(struct irlap_cb *self, + struct sk_buff *skb, + struct irlap_info *info) +{ + struct xid_frame *xid; + discovery_t *discovery = NULL; + __u8 *discovery_info; + char *text; + + if (!pskb_may_pull(skb, sizeof(struct xid_frame))) { + net_err_ratelimited("%s: frame too short!\n", __func__); + return; + } + + xid = (struct xid_frame *) skb->data; + + info->daddr = le32_to_cpu(xid->saddr); + info->saddr = le32_to_cpu(xid->daddr); + + /* Make sure frame is addressed to us */ + if ((info->saddr != self->saddr) && (info->saddr != BROADCAST)) { + pr_debug("%s(), frame is not addressed to us!\n", + __func__); + return; + } + + switch (xid->flags & 0x03) { + case 0x00: + info->S = 1; + break; + case 0x01: + info->S = 6; + break; + case 0x02: + info->S = 8; + break; + case 0x03: + info->S = 16; + break; + default: + /* Error!! */ + return; + } + info->s = xid->slotnr; + + discovery_info = skb_pull(skb, sizeof(struct xid_frame)); + + /* + * Check if last frame + */ + if (info->s == 0xff) { + /* Check if things are sane at this point... */ + if((discovery_info == NULL) || + !pskb_may_pull(skb, 3)) { + net_err_ratelimited("%s: discovery frame too short!\n", + __func__); + return; + } + + /* + * We now have some discovery info to deliver! + */ + discovery = kzalloc(sizeof(discovery_t), GFP_ATOMIC); + if (!discovery) + return; + + discovery->data.daddr = info->daddr; + discovery->data.saddr = self->saddr; + discovery->timestamp = jiffies; + + discovery->data.hints[0] = discovery_info[0]; + if (discovery_info[0] & HINT_EXTENSION) { + discovery->data.hints[1] = discovery_info[1]; + discovery->data.charset = discovery_info[2]; + text = (char *) &discovery_info[3]; + } else { + discovery->data.hints[1] = 0; + discovery->data.charset = discovery_info[1]; + text = (char *) &discovery_info[2]; + } + /* + * Terminate string, should be safe since this is where the + * FCS bytes resides. + */ + skb->data[skb->len] = '\0'; + strncpy(discovery->data.info, text, NICKNAME_MAX_LEN); + discovery->name_len = strlen(discovery->data.info); + + info->discovery = discovery; + } else + info->discovery = NULL; + + irlap_do_event(self, RECV_DISCOVERY_XID_CMD, skb, info); +} + +/* + * Function irlap_send_rr_frame (self, command) + * + * Build and transmit RR (Receive Ready) frame. Notice that it is currently + * only possible to send RR frames with the poll bit set. + */ +void irlap_send_rr_frame(struct irlap_cb *self, int command) +{ + struct sk_buff *tx_skb; + struct rr_frame *frame; + + tx_skb = alloc_skb(sizeof(struct rr_frame), GFP_ATOMIC); + if (!tx_skb) + return; + + frame = (struct rr_frame *)skb_put(tx_skb, 2); + + frame->caddr = self->caddr; + frame->caddr |= (command) ? CMD_FRAME : 0; + + frame->control = RR | PF_BIT | (self->vr << 5); + + irlap_queue_xmit(self, tx_skb); +} + +/* + * Function irlap_send_rd_frame (self) + * + * Request disconnect. Used by a secondary station to request the + * disconnection of the link. + */ +void irlap_send_rd_frame(struct irlap_cb *self) +{ + struct sk_buff *tx_skb; + struct rd_frame *frame; + + tx_skb = alloc_skb(sizeof(struct rd_frame), GFP_ATOMIC); + if (!tx_skb) + return; + + frame = (struct rd_frame *)skb_put(tx_skb, 2); + + frame->caddr = self->caddr; + frame->control = RD_RSP | PF_BIT; + + irlap_queue_xmit(self, tx_skb); +} + +/* + * Function irlap_recv_rr_frame (skb, info) + * + * Received RR (Receive Ready) frame from peer station, no harm in + * making it inline since its called only from one single place + * (irlap_driver_rcv). + */ +static inline void irlap_recv_rr_frame(struct irlap_cb *self, + struct sk_buff *skb, + struct irlap_info *info, int command) +{ + info->nr = skb->data[1] >> 5; + + /* Check if this is a command or a response frame */ + if (command) + irlap_do_event(self, RECV_RR_CMD, skb, info); + else + irlap_do_event(self, RECV_RR_RSP, skb, info); +} + +/* + * Function irlap_recv_rnr_frame (self, skb, info) + * + * Received RNR (Receive Not Ready) frame from peer station + * + */ +static void irlap_recv_rnr_frame(struct irlap_cb *self, struct sk_buff *skb, + struct irlap_info *info, int command) +{ + info->nr = skb->data[1] >> 5; + + pr_debug("%s(), nr=%d, %ld\n", __func__, info->nr, jiffies); + + if (command) + irlap_do_event(self, RECV_RNR_CMD, skb, info); + else + irlap_do_event(self, RECV_RNR_RSP, skb, info); +} + +static void irlap_recv_rej_frame(struct irlap_cb *self, struct sk_buff *skb, + struct irlap_info *info, int command) +{ + info->nr = skb->data[1] >> 5; + + /* Check if this is a command or a response frame */ + if (command) + irlap_do_event(self, RECV_REJ_CMD, skb, info); + else + irlap_do_event(self, RECV_REJ_RSP, skb, info); +} + +static void irlap_recv_srej_frame(struct irlap_cb *self, struct sk_buff *skb, + struct irlap_info *info, int command) +{ + info->nr = skb->data[1] >> 5; + + /* Check if this is a command or a response frame */ + if (command) + irlap_do_event(self, RECV_SREJ_CMD, skb, info); + else + irlap_do_event(self, RECV_SREJ_RSP, skb, info); +} + +static void irlap_recv_disc_frame(struct irlap_cb *self, struct sk_buff *skb, + struct irlap_info *info, int command) +{ + /* Check if this is a command or a response frame */ + if (command) + irlap_do_event(self, RECV_DISC_CMD, skb, info); + else + irlap_do_event(self, RECV_RD_RSP, skb, info); +} + +/* + * Function irlap_recv_ua_frame (skb, frame) + * + * Received UA (Unnumbered Acknowledgement) frame + * + */ +static inline void irlap_recv_ua_frame(struct irlap_cb *self, + struct sk_buff *skb, + struct irlap_info *info) +{ + irlap_do_event(self, RECV_UA_RSP, skb, info); +} + +/* + * Function irlap_send_data_primary(self, skb) + * + * Send I-frames as the primary station but without the poll bit set + * + */ +void irlap_send_data_primary(struct irlap_cb *self, struct sk_buff *skb) +{ + struct sk_buff *tx_skb; + + if (skb->data[1] == I_FRAME) { + + /* + * Insert frame sequence number (Vs) in control field before + * inserting into transmit window queue. + */ + skb->data[1] = I_FRAME | (self->vs << 1); + + /* + * Insert frame in store, in case of retransmissions + * Increase skb reference count, see irlap_do_event() + */ + skb_get(skb); + skb_queue_tail(&self->wx_list, skb); + + /* Copy buffer */ + tx_skb = skb_clone(skb, GFP_ATOMIC); + if (tx_skb == NULL) { + return; + } + + self->vs = (self->vs + 1) % 8; + self->ack_required = FALSE; + self->window -= 1; + + irlap_send_i_frame( self, tx_skb, CMD_FRAME); + } else { + pr_debug("%s(), sending unreliable frame\n", __func__); + irlap_send_ui_frame(self, skb_get(skb), self->caddr, CMD_FRAME); + self->window -= 1; + } +} +/* + * Function irlap_send_data_primary_poll (self, skb) + * + * Send I(nformation) frame as primary with poll bit set + */ +void irlap_send_data_primary_poll(struct irlap_cb *self, struct sk_buff *skb) +{ + struct sk_buff *tx_skb; + int transmission_time; + + /* Stop P timer */ + del_timer(&self->poll_timer); + + /* Is this reliable or unreliable data? */ + if (skb->data[1] == I_FRAME) { + + /* + * Insert frame sequence number (Vs) in control field before + * inserting into transmit window queue. + */ + skb->data[1] = I_FRAME | (self->vs << 1); + + /* + * Insert frame in store, in case of retransmissions + * Increase skb reference count, see irlap_do_event() + */ + skb_get(skb); + skb_queue_tail(&self->wx_list, skb); + + /* Copy buffer */ + tx_skb = skb_clone(skb, GFP_ATOMIC); + if (tx_skb == NULL) { + return; + } + + /* + * Set poll bit if necessary. We do this to the copied + * skb, since retransmitted need to set or clear the poll + * bit depending on when they are sent. + */ + tx_skb->data[1] |= PF_BIT; + + self->vs = (self->vs + 1) % 8; + self->ack_required = FALSE; + + irlap_next_state(self, LAP_NRM_P); + irlap_send_i_frame(self, tx_skb, CMD_FRAME); + } else { + pr_debug("%s(), sending unreliable frame\n", __func__); + + if (self->ack_required) { + irlap_send_ui_frame(self, skb_get(skb), self->caddr, CMD_FRAME); + irlap_next_state(self, LAP_NRM_P); + irlap_send_rr_frame(self, CMD_FRAME); + self->ack_required = FALSE; + } else { + skb->data[1] |= PF_BIT; + irlap_next_state(self, LAP_NRM_P); + irlap_send_ui_frame(self, skb_get(skb), self->caddr, CMD_FRAME); + } + } + + /* How much time we took for transmission of all frames. + * We don't know, so let assume we used the full window. Jean II */ + transmission_time = self->final_timeout; + + /* Reset parameter so that we can fill next window */ + self->window = self->window_size; + +#ifdef CONFIG_IRDA_DYNAMIC_WINDOW + /* Remove what we have not used. Just do a prorata of the + * bytes left in window to window capacity. + * See max_line_capacities[][] in qos.c for details. Jean II */ + transmission_time -= (self->final_timeout * self->bytes_left + / self->line_capacity); + pr_debug("%s() adjusting transmission_time : ft=%d, bl=%d, lc=%d -> tt=%d\n", + __func__, self->final_timeout, self->bytes_left, + self->line_capacity, transmission_time); + + /* We are allowed to transmit a maximum number of bytes again. */ + self->bytes_left = self->line_capacity; +#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */ + + /* + * The network layer has a intermediate buffer between IrLAP + * and the IrDA driver which can contain 8 frames. So, even + * though IrLAP is currently sending the *last* frame of the + * tx-window, the driver most likely has only just started + * sending the *first* frame of the same tx-window. + * I.e. we are always at the very beginning of or Tx window. + * Now, we are supposed to set the final timer from the end + * of our tx-window to let the other peer reply. So, we need + * to add extra time to compensate for the fact that we + * are really at the start of tx-window, otherwise the final timer + * might expire before he can answer... + * Jean II + */ + irlap_start_final_timer(self, self->final_timeout + transmission_time); + + /* + * The clever amongst you might ask why we do this adjustement + * only here, and not in all the other cases in irlap_event.c. + * In all those other case, we only send a very short management + * frame (few bytes), so the adjustement would be lost in the + * noise... + * The exception of course is irlap_resend_rejected_frame(). + * Jean II */ +} + +/* + * Function irlap_send_data_secondary_final (self, skb) + * + * Send I(nformation) frame as secondary with final bit set + * + */ +void irlap_send_data_secondary_final(struct irlap_cb *self, + struct sk_buff *skb) +{ + struct sk_buff *tx_skb = NULL; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + IRDA_ASSERT(skb != NULL, return;); + + /* Is this reliable or unreliable data? */ + if (skb->data[1] == I_FRAME) { + + /* + * Insert frame sequence number (Vs) in control field before + * inserting into transmit window queue. + */ + skb->data[1] = I_FRAME | (self->vs << 1); + + /* + * Insert frame in store, in case of retransmissions + * Increase skb reference count, see irlap_do_event() + */ + skb_get(skb); + skb_queue_tail(&self->wx_list, skb); + + tx_skb = skb_clone(skb, GFP_ATOMIC); + if (tx_skb == NULL) { + return; + } + + tx_skb->data[1] |= PF_BIT; + + self->vs = (self->vs + 1) % 8; + self->ack_required = FALSE; + + irlap_send_i_frame(self, tx_skb, RSP_FRAME); + } else { + if (self->ack_required) { + irlap_send_ui_frame(self, skb_get(skb), self->caddr, RSP_FRAME); + irlap_send_rr_frame(self, RSP_FRAME); + self->ack_required = FALSE; + } else { + skb->data[1] |= PF_BIT; + irlap_send_ui_frame(self, skb_get(skb), self->caddr, RSP_FRAME); + } + } + + self->window = self->window_size; +#ifdef CONFIG_IRDA_DYNAMIC_WINDOW + /* We are allowed to transmit a maximum number of bytes again. */ + self->bytes_left = self->line_capacity; +#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */ + + irlap_start_wd_timer(self, self->wd_timeout); +} + +/* + * Function irlap_send_data_secondary (self, skb) + * + * Send I(nformation) frame as secondary without final bit set + * + */ +void irlap_send_data_secondary(struct irlap_cb *self, struct sk_buff *skb) +{ + struct sk_buff *tx_skb = NULL; + + /* Is this reliable or unreliable data? */ + if (skb->data[1] == I_FRAME) { + + /* + * Insert frame sequence number (Vs) in control field before + * inserting into transmit window queue. + */ + skb->data[1] = I_FRAME | (self->vs << 1); + + /* + * Insert frame in store, in case of retransmissions + * Increase skb reference count, see irlap_do_event() + */ + skb_get(skb); + skb_queue_tail(&self->wx_list, skb); + + tx_skb = skb_clone(skb, GFP_ATOMIC); + if (tx_skb == NULL) { + return; + } + + self->vs = (self->vs + 1) % 8; + self->ack_required = FALSE; + self->window -= 1; + + irlap_send_i_frame(self, tx_skb, RSP_FRAME); + } else { + irlap_send_ui_frame(self, skb_get(skb), self->caddr, RSP_FRAME); + self->window -= 1; + } +} + +/* + * Function irlap_resend_rejected_frames (nr) + * + * Resend frames which has not been acknowledged. Should be safe to + * traverse the list without locking it since this function will only be + * called from interrupt context (BH) + */ +void irlap_resend_rejected_frames(struct irlap_cb *self, int command) +{ + struct sk_buff *tx_skb; + struct sk_buff *skb; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + /* Resend unacknowledged frame(s) */ + skb_queue_walk(&self->wx_list, skb) { + irlap_wait_min_turn_around(self, &self->qos_tx); + + /* We copy the skb to be retransmitted since we will have to + * modify it. Cloning will confuse packet sniffers + */ + /* tx_skb = skb_clone( skb, GFP_ATOMIC); */ + tx_skb = skb_copy(skb, GFP_ATOMIC); + if (!tx_skb) { + pr_debug("%s(), unable to copy\n", __func__); + return; + } + + /* Clear old Nr field + poll bit */ + tx_skb->data[1] &= 0x0f; + + /* + * Set poll bit on the last frame retransmitted + */ + if (skb_queue_is_last(&self->wx_list, skb)) + tx_skb->data[1] |= PF_BIT; /* Set p/f bit */ + else + tx_skb->data[1] &= ~PF_BIT; /* Clear p/f bit */ + + irlap_send_i_frame(self, tx_skb, command); + } +#if 0 /* Not yet */ + /* + * We can now fill the window with additional data frames + */ + while (!skb_queue_empty(&self->txq)) { + + pr_debug("%s(), sending additional frames!\n", __func__); + if (self->window > 0) { + skb = skb_dequeue( &self->txq); + IRDA_ASSERT(skb != NULL, return;); + + /* + * If send window > 1 then send frame with pf + * bit cleared + */ + if ((self->window > 1) && + !skb_queue_empty(&self->txq)) { + irlap_send_data_primary(self, skb); + } else { + irlap_send_data_primary_poll(self, skb); + } + kfree_skb(skb); + } + } +#endif +} + +void irlap_resend_rejected_frame(struct irlap_cb *self, int command) +{ + struct sk_buff *tx_skb; + struct sk_buff *skb; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + /* Resend unacknowledged frame(s) */ + skb = skb_peek(&self->wx_list); + if (skb != NULL) { + irlap_wait_min_turn_around(self, &self->qos_tx); + + /* We copy the skb to be retransmitted since we will have to + * modify it. Cloning will confuse packet sniffers + */ + /* tx_skb = skb_clone( skb, GFP_ATOMIC); */ + tx_skb = skb_copy(skb, GFP_ATOMIC); + if (!tx_skb) { + pr_debug("%s(), unable to copy\n", __func__); + return; + } + + /* Clear old Nr field + poll bit */ + tx_skb->data[1] &= 0x0f; + + /* Set poll/final bit */ + tx_skb->data[1] |= PF_BIT; /* Set p/f bit */ + + irlap_send_i_frame(self, tx_skb, command); + } +} + +/* + * Function irlap_send_ui_frame (self, skb, command) + * + * Contruct and transmit an Unnumbered Information (UI) frame + * + */ +void irlap_send_ui_frame(struct irlap_cb *self, struct sk_buff *skb, + __u8 caddr, int command) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + IRDA_ASSERT(skb != NULL, return;); + + /* Insert connection address */ + skb->data[0] = caddr | ((command) ? CMD_FRAME : 0); + + irlap_queue_xmit(self, skb); +} + +/* + * Function irlap_send_i_frame (skb) + * + * Contruct and transmit Information (I) frame + */ +static void irlap_send_i_frame(struct irlap_cb *self, struct sk_buff *skb, + int command) +{ + /* Insert connection address */ + skb->data[0] = self->caddr; + skb->data[0] |= (command) ? CMD_FRAME : 0; + + /* Insert next to receive (Vr) */ + skb->data[1] |= (self->vr << 5); /* insert nr */ + + irlap_queue_xmit(self, skb); +} + +/* + * Function irlap_recv_i_frame (skb, frame) + * + * Receive and parse an I (Information) frame, no harm in making it inline + * since it's called only from one single place (irlap_driver_rcv). + */ +static inline void irlap_recv_i_frame(struct irlap_cb *self, + struct sk_buff *skb, + struct irlap_info *info, int command) +{ + info->nr = skb->data[1] >> 5; /* Next to receive */ + info->pf = skb->data[1] & PF_BIT; /* Final bit */ + info->ns = (skb->data[1] >> 1) & 0x07; /* Next to send */ + + /* Check if this is a command or a response frame */ + if (command) + irlap_do_event(self, RECV_I_CMD, skb, info); + else + irlap_do_event(self, RECV_I_RSP, skb, info); +} + +/* + * Function irlap_recv_ui_frame (self, skb, info) + * + * Receive and parse an Unnumbered Information (UI) frame + * + */ +static void irlap_recv_ui_frame(struct irlap_cb *self, struct sk_buff *skb, + struct irlap_info *info) +{ + info->pf = skb->data[1] & PF_BIT; /* Final bit */ + + irlap_do_event(self, RECV_UI_FRAME, skb, info); +} + +/* + * Function irlap_recv_frmr_frame (skb, frame) + * + * Received Frame Reject response. + * + */ +static void irlap_recv_frmr_frame(struct irlap_cb *self, struct sk_buff *skb, + struct irlap_info *info) +{ + __u8 *frame; + int w, x, y, z; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + IRDA_ASSERT(skb != NULL, return;); + IRDA_ASSERT(info != NULL, return;); + + if (!pskb_may_pull(skb, 4)) { + net_err_ratelimited("%s: frame too short!\n", __func__); + return; + } + + frame = skb->data; + + info->nr = frame[2] >> 5; /* Next to receive */ + info->pf = frame[2] & PF_BIT; /* Final bit */ + info->ns = (frame[2] >> 1) & 0x07; /* Next to send */ + + w = frame[3] & 0x01; + x = frame[3] & 0x02; + y = frame[3] & 0x04; + z = frame[3] & 0x08; + + if (w) { + pr_debug("Rejected control field is undefined or not implemented\n"); + } + if (x) { + pr_debug("Rejected control field was invalid because it contained a non permitted I field\n"); + } + if (y) { + pr_debug("Received I field exceeded the maximum negotiated for the existing connection or exceeded the maximum this station supports if no connection exists\n"); + } + if (z) { + pr_debug("Rejected control field control field contained an invalid Nr count\n"); + } + irlap_do_event(self, RECV_FRMR_RSP, skb, info); +} + +/* + * Function irlap_send_test_frame (self, daddr) + * + * Send a test frame response + * + */ +void irlap_send_test_frame(struct irlap_cb *self, __u8 caddr, __u32 daddr, + struct sk_buff *cmd) +{ + struct sk_buff *tx_skb; + struct test_frame *frame; + __u8 *info; + + tx_skb = alloc_skb(cmd->len + sizeof(struct test_frame), GFP_ATOMIC); + if (!tx_skb) + return; + + /* Broadcast frames must include saddr and daddr fields */ + if (caddr == CBROADCAST) { + frame = (struct test_frame *) + skb_put(tx_skb, sizeof(struct test_frame)); + + /* Insert the swapped addresses */ + frame->saddr = cpu_to_le32(self->saddr); + frame->daddr = cpu_to_le32(daddr); + } else + frame = (struct test_frame *) skb_put(tx_skb, LAP_ADDR_HEADER + LAP_CTRL_HEADER); + + frame->caddr = caddr; + frame->control = TEST_RSP | PF_BIT; + + /* Copy info */ + info = skb_put(tx_skb, cmd->len); + memcpy(info, cmd->data, cmd->len); + + /* Return to sender */ + irlap_wait_min_turn_around(self, &self->qos_tx); + irlap_queue_xmit(self, tx_skb); +} + +/* + * Function irlap_recv_test_frame (self, skb) + * + * Receive a test frame + * + */ +static void irlap_recv_test_frame(struct irlap_cb *self, struct sk_buff *skb, + struct irlap_info *info, int command) +{ + struct test_frame *frame; + + if (!pskb_may_pull(skb, sizeof(*frame))) { + net_err_ratelimited("%s: frame too short!\n", __func__); + return; + } + frame = (struct test_frame *) skb->data; + + /* Broadcast frames must carry saddr and daddr fields */ + if (info->caddr == CBROADCAST) { + if (skb->len < sizeof(struct test_frame)) { + pr_debug("%s() test frame too short!\n", + __func__); + return; + } + + /* Read and swap addresses */ + info->daddr = le32_to_cpu(frame->saddr); + info->saddr = le32_to_cpu(frame->daddr); + + /* Make sure frame is addressed to us */ + if ((info->saddr != self->saddr) && + (info->saddr != BROADCAST)) { + return; + } + } + + if (command) + irlap_do_event(self, RECV_TEST_CMD, skb, info); + else + irlap_do_event(self, RECV_TEST_RSP, skb, info); +} + +/* + * Function irlap_driver_rcv (skb, netdev, ptype) + * + * Called when a frame is received. Dispatches the right receive function + * for processing of the frame. + * + * Note on skb management : + * After calling the higher layers of the IrDA stack, we always + * kfree() the skb, which drop the reference count (and potentially + * destroy it). + * If a higher layer of the stack want to keep the skb around (to put + * in a queue or pass it to the higher layer), it will need to use + * skb_get() to keep a reference on it. This is usually done at the + * LMP level in irlmp.c. + * Jean II + */ +int irlap_driver_rcv(struct sk_buff *skb, struct net_device *dev, + struct packet_type *ptype, struct net_device *orig_dev) +{ + struct irlap_info info; + struct irlap_cb *self; + int command; + __u8 control; + int ret = -1; + + if (!net_eq(dev_net(dev), &init_net)) + goto out; + + /* FIXME: should we get our own field? */ + self = (struct irlap_cb *) dev->atalk_ptr; + + /* If the net device is down, then IrLAP is gone! */ + if (!self || self->magic != LAP_MAGIC) + goto err; + + /* We are no longer an "old" protocol, so we need to handle + * share and non linear skbs. This should never happen, so + * we don't need to be clever about it. Jean II */ + if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) { + net_err_ratelimited("%s: can't clone shared skb!\n", __func__); + goto err; + } + + /* Check if frame is large enough for parsing */ + if (!pskb_may_pull(skb, 2)) { + net_err_ratelimited("%s: frame too short!\n", __func__); + goto err; + } + + command = skb->data[0] & CMD_FRAME; + info.caddr = skb->data[0] & CBROADCAST; + + info.pf = skb->data[1] & PF_BIT; + info.control = skb->data[1] & ~PF_BIT; /* Mask away poll/final bit */ + + control = info.control; + + /* First we check if this frame has a valid connection address */ + if ((info.caddr != self->caddr) && (info.caddr != CBROADCAST)) { + pr_debug("%s(), wrong connection address!\n", + __func__); + goto out; + } + /* + * Optimize for the common case and check if the frame is an + * I(nformation) frame. Only I-frames have bit 0 set to 0 + */ + if (~control & 0x01) { + irlap_recv_i_frame(self, skb, &info, command); + goto out; + } + /* + * We now check is the frame is an S(upervisory) frame. Only + * S-frames have bit 0 set to 1 and bit 1 set to 0 + */ + if (~control & 0x02) { + /* + * Received S(upervisory) frame, check which frame type it is + * only the first nibble is of interest + */ + switch (control & 0x0f) { + case RR: + irlap_recv_rr_frame(self, skb, &info, command); + break; + case RNR: + irlap_recv_rnr_frame(self, skb, &info, command); + break; + case REJ: + irlap_recv_rej_frame(self, skb, &info, command); + break; + case SREJ: + irlap_recv_srej_frame(self, skb, &info, command); + break; + default: + net_warn_ratelimited("%s: Unknown S-frame %02x received!\n", + __func__, info.control); + break; + } + goto out; + } + /* + * This must be a C(ontrol) frame + */ + switch (control) { + case XID_RSP: + irlap_recv_discovery_xid_rsp(self, skb, &info); + break; + case XID_CMD: + irlap_recv_discovery_xid_cmd(self, skb, &info); + break; + case SNRM_CMD: + irlap_recv_snrm_cmd(self, skb, &info); + break; + case DM_RSP: + irlap_do_event(self, RECV_DM_RSP, skb, &info); + break; + case DISC_CMD: /* And RD_RSP since they have the same value */ + irlap_recv_disc_frame(self, skb, &info, command); + break; + case TEST_CMD: + irlap_recv_test_frame(self, skb, &info, command); + break; + case UA_RSP: + irlap_recv_ua_frame(self, skb, &info); + break; + case FRMR_RSP: + irlap_recv_frmr_frame(self, skb, &info); + break; + case UI_FRAME: + irlap_recv_ui_frame(self, skb, &info); + break; + default: + net_warn_ratelimited("%s: Unknown frame %02x received!\n", + __func__, info.control); + break; + } +out: + ret = 0; +err: + /* Always drop our reference on the skb */ + dev_kfree_skb(skb); + return ret; +} diff --git a/kernel/net/irda/irlmp.c b/kernel/net/irda/irlmp.c new file mode 100644 index 000000000..a26c401ef --- /dev/null +++ b/kernel/net/irda/irlmp.c @@ -0,0 +1,1996 @@ +/********************************************************************* + * + * Filename: irlmp.c + * Version: 1.0 + * Description: IrDA Link Management Protocol (LMP) layer + * Status: Stable. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Sun Aug 17 20:54:32 1997 + * Modified at: Wed Jan 5 11:26:03 2000 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>, + * All Rights Reserved. + * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/skbuff.h> +#include <linux/types.h> +#include <linux/proc_fs.h> +#include <linux/init.h> +#include <linux/kmod.h> +#include <linux/random.h> +#include <linux/seq_file.h> + +#include <net/irda/irda.h> +#include <net/irda/timer.h> +#include <net/irda/qos.h> +#include <net/irda/irlap.h> +#include <net/irda/iriap.h> +#include <net/irda/irlmp.h> +#include <net/irda/irlmp_frame.h> + +#include <asm/unaligned.h> + +static __u8 irlmp_find_free_slsap(void); +static int irlmp_slsap_inuse(__u8 slsap_sel); + +/* Master structure */ +struct irlmp_cb *irlmp = NULL; + +/* These can be altered by the sysctl interface */ +int sysctl_discovery = 0; +int sysctl_discovery_timeout = 3; /* 3 seconds by default */ +int sysctl_discovery_slots = 6; /* 6 slots by default */ +int sysctl_lap_keepalive_time = LM_IDLE_TIMEOUT * 1000 / HZ; +char sysctl_devname[65]; + +static const char *irlmp_reasons[] = { + "ERROR, NOT USED", + "LM_USER_REQUEST", + "LM_LAP_DISCONNECT", + "LM_CONNECT_FAILURE", + "LM_LAP_RESET", + "LM_INIT_DISCONNECT", + "ERROR, NOT USED", + "UNKNOWN", +}; + +const char *irlmp_reason_str(LM_REASON reason) +{ + reason = min_t(size_t, reason, ARRAY_SIZE(irlmp_reasons) - 1); + return irlmp_reasons[reason]; +} + +/* + * Function irlmp_init (void) + * + * Create (allocate) the main IrLMP structure + * + */ +int __init irlmp_init(void) +{ + /* Initialize the irlmp structure. */ + irlmp = kzalloc( sizeof(struct irlmp_cb), GFP_KERNEL); + if (irlmp == NULL) + return -ENOMEM; + + irlmp->magic = LMP_MAGIC; + + irlmp->clients = hashbin_new(HB_LOCK); + irlmp->services = hashbin_new(HB_LOCK); + irlmp->links = hashbin_new(HB_LOCK); + irlmp->unconnected_lsaps = hashbin_new(HB_LOCK); + irlmp->cachelog = hashbin_new(HB_NOLOCK); + + if ((irlmp->clients == NULL) || + (irlmp->services == NULL) || + (irlmp->links == NULL) || + (irlmp->unconnected_lsaps == NULL) || + (irlmp->cachelog == NULL)) { + return -ENOMEM; + } + + spin_lock_init(&irlmp->cachelog->hb_spinlock); + + irlmp->last_lsap_sel = 0x0f; /* Reserved 0x00-0x0f */ + strcpy(sysctl_devname, "Linux"); + + init_timer(&irlmp->discovery_timer); + + /* Do discovery every 3 seconds, conditionally */ + if (sysctl_discovery) + irlmp_start_discovery_timer(irlmp, + sysctl_discovery_timeout*HZ); + + return 0; +} + +/* + * Function irlmp_cleanup (void) + * + * Remove IrLMP layer + * + */ +void irlmp_cleanup(void) +{ + /* Check for main structure */ + IRDA_ASSERT(irlmp != NULL, return;); + IRDA_ASSERT(irlmp->magic == LMP_MAGIC, return;); + + del_timer(&irlmp->discovery_timer); + + hashbin_delete(irlmp->links, (FREE_FUNC) kfree); + hashbin_delete(irlmp->unconnected_lsaps, (FREE_FUNC) kfree); + hashbin_delete(irlmp->clients, (FREE_FUNC) kfree); + hashbin_delete(irlmp->services, (FREE_FUNC) kfree); + hashbin_delete(irlmp->cachelog, (FREE_FUNC) kfree); + + /* De-allocate main structure */ + kfree(irlmp); + irlmp = NULL; +} + +/* + * Function irlmp_open_lsap (slsap, notify) + * + * Register with IrLMP and create a local LSAP, + * returns handle to LSAP. + */ +struct lsap_cb *irlmp_open_lsap(__u8 slsap_sel, notify_t *notify, __u8 pid) +{ + struct lsap_cb *self; + + IRDA_ASSERT(notify != NULL, return NULL;); + IRDA_ASSERT(irlmp != NULL, return NULL;); + IRDA_ASSERT(irlmp->magic == LMP_MAGIC, return NULL;); + IRDA_ASSERT(notify->instance != NULL, return NULL;); + + /* Does the client care which Source LSAP selector it gets? */ + if (slsap_sel == LSAP_ANY) { + slsap_sel = irlmp_find_free_slsap(); + if (!slsap_sel) + return NULL; + } else if (irlmp_slsap_inuse(slsap_sel)) + return NULL; + + /* Allocate new instance of a LSAP connection */ + self = kzalloc(sizeof(struct lsap_cb), GFP_ATOMIC); + if (self == NULL) + return NULL; + + self->magic = LMP_LSAP_MAGIC; + self->slsap_sel = slsap_sel; + + /* Fix connectionless LSAP's */ + if (slsap_sel == LSAP_CONNLESS) { +#ifdef CONFIG_IRDA_ULTRA + self->dlsap_sel = LSAP_CONNLESS; + self->pid = pid; +#endif /* CONFIG_IRDA_ULTRA */ + } else + self->dlsap_sel = LSAP_ANY; + /* self->connected = FALSE; -> already NULL via memset() */ + + init_timer(&self->watchdog_timer); + + self->notify = *notify; + + self->lsap_state = LSAP_DISCONNECTED; + + /* Insert into queue of unconnected LSAPs */ + hashbin_insert(irlmp->unconnected_lsaps, (irda_queue_t *) self, + (long) self, NULL); + + return self; +} +EXPORT_SYMBOL(irlmp_open_lsap); + +/* + * Function __irlmp_close_lsap (self) + * + * Remove an instance of LSAP + */ +static void __irlmp_close_lsap(struct lsap_cb *self) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;); + + /* + * Set some of the variables to preset values + */ + self->magic = 0; + del_timer(&self->watchdog_timer); /* Important! */ + + if (self->conn_skb) + dev_kfree_skb(self->conn_skb); + + kfree(self); +} + +/* + * Function irlmp_close_lsap (self) + * + * Close and remove LSAP + * + */ +void irlmp_close_lsap(struct lsap_cb *self) +{ + struct lap_cb *lap; + struct lsap_cb *lsap = NULL; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;); + + /* + * Find out if we should remove this LSAP from a link or from the + * list of unconnected lsaps (not associated with a link) + */ + lap = self->lap; + if (lap) { + IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, return;); + /* We might close a LSAP before it has completed the + * connection setup. In those case, higher layers won't + * send a proper disconnect request. Harmless, except + * that we will forget to close LAP... - Jean II */ + if(self->lsap_state != LSAP_DISCONNECTED) { + self->lsap_state = LSAP_DISCONNECTED; + irlmp_do_lap_event(self->lap, + LM_LAP_DISCONNECT_REQUEST, NULL); + } + /* Now, remove from the link */ + lsap = hashbin_remove(lap->lsaps, (long) self, NULL); +#ifdef CONFIG_IRDA_CACHE_LAST_LSAP + lap->cache.valid = FALSE; +#endif + } + self->lap = NULL; + /* Check if we found the LSAP! If not then try the unconnected lsaps */ + if (!lsap) { + lsap = hashbin_remove(irlmp->unconnected_lsaps, (long) self, + NULL); + } + if (!lsap) { + pr_debug("%s(), Looks like somebody has removed me already!\n", + __func__); + return; + } + __irlmp_close_lsap(self); +} +EXPORT_SYMBOL(irlmp_close_lsap); + +/* + * Function irlmp_register_irlap (saddr, notify) + * + * Register IrLAP layer with IrLMP. There is possible to have multiple + * instances of the IrLAP layer, each connected to different IrDA ports + * + */ +void irlmp_register_link(struct irlap_cb *irlap, __u32 saddr, notify_t *notify) +{ + struct lap_cb *lap; + + IRDA_ASSERT(irlmp != NULL, return;); + IRDA_ASSERT(irlmp->magic == LMP_MAGIC, return;); + IRDA_ASSERT(notify != NULL, return;); + + /* + * Allocate new instance of a LSAP connection + */ + lap = kzalloc(sizeof(struct lap_cb), GFP_KERNEL); + if (lap == NULL) + return; + + lap->irlap = irlap; + lap->magic = LMP_LAP_MAGIC; + lap->saddr = saddr; + lap->daddr = DEV_ADDR_ANY; +#ifdef CONFIG_IRDA_CACHE_LAST_LSAP + lap->cache.valid = FALSE; +#endif + lap->lsaps = hashbin_new(HB_LOCK); + if (lap->lsaps == NULL) { + net_warn_ratelimited("%s(), unable to kmalloc lsaps\n", + __func__); + kfree(lap); + return; + } + + lap->lap_state = LAP_STANDBY; + + init_timer(&lap->idle_timer); + + /* + * Insert into queue of LMP links + */ + hashbin_insert(irlmp->links, (irda_queue_t *) lap, lap->saddr, NULL); + + /* + * We set only this variable so IrLAP can tell us on which link the + * different events happened on + */ + irda_notify_init(notify); + notify->instance = lap; +} + +/* + * Function irlmp_unregister_irlap (saddr) + * + * IrLAP layer has been removed! + * + */ +void irlmp_unregister_link(__u32 saddr) +{ + struct lap_cb *link; + + /* We must remove ourselves from the hashbin *first*. This ensure + * that no more LSAPs will be open on this link and no discovery + * will be triggered anymore. Jean II */ + link = hashbin_remove(irlmp->links, saddr, NULL); + if (link) { + IRDA_ASSERT(link->magic == LMP_LAP_MAGIC, return;); + + /* Kill all the LSAPs on this link. Jean II */ + link->reason = LAP_DISC_INDICATION; + link->daddr = DEV_ADDR_ANY; + irlmp_do_lap_event(link, LM_LAP_DISCONNECT_INDICATION, NULL); + + /* Remove all discoveries discovered at this link */ + irlmp_expire_discoveries(irlmp->cachelog, link->saddr, TRUE); + + /* Final cleanup */ + del_timer(&link->idle_timer); + link->magic = 0; + hashbin_delete(link->lsaps, (FREE_FUNC) __irlmp_close_lsap); + kfree(link); + } +} + +/* + * Function irlmp_connect_request (handle, dlsap, userdata) + * + * Connect with a peer LSAP + * + */ +int irlmp_connect_request(struct lsap_cb *self, __u8 dlsap_sel, + __u32 saddr, __u32 daddr, + struct qos_info *qos, struct sk_buff *userdata) +{ + struct sk_buff *tx_skb = userdata; + struct lap_cb *lap; + struct lsap_cb *lsap; + int ret; + + IRDA_ASSERT(self != NULL, return -EBADR;); + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -EBADR;); + + pr_debug("%s(), slsap_sel=%02x, dlsap_sel=%02x, saddr=%08x, daddr=%08x\n", + __func__, self->slsap_sel, dlsap_sel, saddr, daddr); + + if (test_bit(0, &self->connected)) { + ret = -EISCONN; + goto err; + } + + /* Client must supply destination device address */ + if (!daddr) { + ret = -EINVAL; + goto err; + } + + /* Any userdata? */ + if (tx_skb == NULL) { + tx_skb = alloc_skb(LMP_MAX_HEADER, GFP_ATOMIC); + if (!tx_skb) + return -ENOMEM; + + skb_reserve(tx_skb, LMP_MAX_HEADER); + } + + /* Make room for MUX control header (3 bytes) */ + IRDA_ASSERT(skb_headroom(tx_skb) >= LMP_CONTROL_HEADER, return -1;); + skb_push(tx_skb, LMP_CONTROL_HEADER); + + self->dlsap_sel = dlsap_sel; + + /* + * Find the link to where we should try to connect since there may + * be more than one IrDA port on this machine. If the client has + * passed us the saddr (and already knows which link to use), then + * we use that to find the link, if not then we have to look in the + * discovery log and check if any of the links has discovered a + * device with the given daddr + */ + if ((!saddr) || (saddr == DEV_ADDR_ANY)) { + discovery_t *discovery; + unsigned long flags; + + spin_lock_irqsave(&irlmp->cachelog->hb_spinlock, flags); + if (daddr != DEV_ADDR_ANY) + discovery = hashbin_find(irlmp->cachelog, daddr, NULL); + else { + pr_debug("%s(), no daddr\n", __func__); + discovery = (discovery_t *) + hashbin_get_first(irlmp->cachelog); + } + + if (discovery) { + saddr = discovery->data.saddr; + daddr = discovery->data.daddr; + } + spin_unlock_irqrestore(&irlmp->cachelog->hb_spinlock, flags); + } + lap = hashbin_lock_find(irlmp->links, saddr, NULL); + if (lap == NULL) { + pr_debug("%s(), Unable to find a usable link!\n", __func__); + ret = -EHOSTUNREACH; + goto err; + } + + /* Check if LAP is disconnected or already connected */ + if (lap->daddr == DEV_ADDR_ANY) + lap->daddr = daddr; + else if (lap->daddr != daddr) { + /* Check if some LSAPs are active on this LAP */ + if (HASHBIN_GET_SIZE(lap->lsaps) == 0) { + /* No active connection, but LAP hasn't been + * disconnected yet (waiting for timeout in LAP). + * Maybe we could give LAP a bit of help in this case. + */ + pr_debug("%s(), sorry, but I'm waiting for LAP to timeout!\n", + __func__); + ret = -EAGAIN; + goto err; + } + + /* LAP is already connected to a different node, and LAP + * can only talk to one node at a time */ + pr_debug("%s(), sorry, but link is busy!\n", __func__); + ret = -EBUSY; + goto err; + } + + self->lap = lap; + + /* + * Remove LSAP from list of unconnected LSAPs and insert it into the + * list of connected LSAPs for the particular link + */ + lsap = hashbin_remove(irlmp->unconnected_lsaps, (long) self, NULL); + + IRDA_ASSERT(lsap != NULL, return -1;); + IRDA_ASSERT(lsap->magic == LMP_LSAP_MAGIC, return -1;); + IRDA_ASSERT(lsap->lap != NULL, return -1;); + IRDA_ASSERT(lsap->lap->magic == LMP_LAP_MAGIC, return -1;); + + hashbin_insert(self->lap->lsaps, (irda_queue_t *) self, (long) self, + NULL); + + set_bit(0, &self->connected); /* TRUE */ + + /* + * User supplied qos specifications? + */ + if (qos) + self->qos = *qos; + + irlmp_do_lsap_event(self, LM_CONNECT_REQUEST, tx_skb); + + /* Drop reference count - see irlap_data_request(). */ + dev_kfree_skb(tx_skb); + + return 0; + +err: + /* Cleanup */ + if(tx_skb) + dev_kfree_skb(tx_skb); + return ret; +} +EXPORT_SYMBOL(irlmp_connect_request); + +/* + * Function irlmp_connect_indication (self) + * + * Incoming connection + * + */ +void irlmp_connect_indication(struct lsap_cb *self, struct sk_buff *skb) +{ + int max_seg_size; + int lap_header_size; + int max_header_size; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;); + IRDA_ASSERT(skb != NULL, return;); + IRDA_ASSERT(self->lap != NULL, return;); + + pr_debug("%s(), slsap_sel=%02x, dlsap_sel=%02x\n", + __func__, self->slsap_sel, self->dlsap_sel); + + /* Note : self->lap is set in irlmp_link_data_indication(), + * (case CONNECT_CMD:) because we have no way to set it here. + * Similarly, self->dlsap_sel is usually set in irlmp_find_lsap(). + * Jean II */ + + self->qos = *self->lap->qos; + + max_seg_size = self->lap->qos->data_size.value-LMP_HEADER; + lap_header_size = IRLAP_GET_HEADER_SIZE(self->lap->irlap); + max_header_size = LMP_HEADER + lap_header_size; + + /* Hide LMP_CONTROL_HEADER header from layer above */ + skb_pull(skb, LMP_CONTROL_HEADER); + + if (self->notify.connect_indication) { + /* Don't forget to refcount it - see irlap_driver_rcv(). */ + skb_get(skb); + self->notify.connect_indication(self->notify.instance, self, + &self->qos, max_seg_size, + max_header_size, skb); + } +} + +/* + * Function irlmp_connect_response (handle, userdata) + * + * Service user is accepting connection + * + */ +int irlmp_connect_response(struct lsap_cb *self, struct sk_buff *userdata) +{ + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); + IRDA_ASSERT(userdata != NULL, return -1;); + + /* We set the connected bit and move the lsap to the connected list + * in the state machine itself. Jean II */ + + pr_debug("%s(), slsap_sel=%02x, dlsap_sel=%02x\n", + __func__, self->slsap_sel, self->dlsap_sel); + + /* Make room for MUX control header (3 bytes) */ + IRDA_ASSERT(skb_headroom(userdata) >= LMP_CONTROL_HEADER, return -1;); + skb_push(userdata, LMP_CONTROL_HEADER); + + irlmp_do_lsap_event(self, LM_CONNECT_RESPONSE, userdata); + + /* Drop reference count - see irlap_data_request(). */ + dev_kfree_skb(userdata); + + return 0; +} +EXPORT_SYMBOL(irlmp_connect_response); + +/* + * Function irlmp_connect_confirm (handle, skb) + * + * LSAP connection confirmed peer device! + */ +void irlmp_connect_confirm(struct lsap_cb *self, struct sk_buff *skb) +{ + int max_header_size; + int lap_header_size; + int max_seg_size; + + IRDA_ASSERT(skb != NULL, return;); + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;); + IRDA_ASSERT(self->lap != NULL, return;); + + self->qos = *self->lap->qos; + + max_seg_size = self->lap->qos->data_size.value-LMP_HEADER; + lap_header_size = IRLAP_GET_HEADER_SIZE(self->lap->irlap); + max_header_size = LMP_HEADER + lap_header_size; + + pr_debug("%s(), max_header_size=%d\n", + __func__, max_header_size); + + /* Hide LMP_CONTROL_HEADER header from layer above */ + skb_pull(skb, LMP_CONTROL_HEADER); + + if (self->notify.connect_confirm) { + /* Don't forget to refcount it - see irlap_driver_rcv() */ + skb_get(skb); + self->notify.connect_confirm(self->notify.instance, self, + &self->qos, max_seg_size, + max_header_size, skb); + } +} + +/* + * Function irlmp_dup (orig, instance) + * + * Duplicate LSAP, can be used by servers to confirm a connection on a + * new LSAP so it can keep listening on the old one. + * + */ +struct lsap_cb *irlmp_dup(struct lsap_cb *orig, void *instance) +{ + struct lsap_cb *new; + unsigned long flags; + + spin_lock_irqsave(&irlmp->unconnected_lsaps->hb_spinlock, flags); + + /* Only allowed to duplicate unconnected LSAP's, and only LSAPs + * that have received a connect indication. Jean II */ + if ((!hashbin_find(irlmp->unconnected_lsaps, (long) orig, NULL)) || + (orig->lap == NULL)) { + pr_debug("%s(), invalid LSAP (wrong state)\n", + __func__); + spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock, + flags); + return NULL; + } + + /* Allocate a new instance */ + new = kmemdup(orig, sizeof(*new), GFP_ATOMIC); + if (!new) { + pr_debug("%s(), unable to kmalloc\n", __func__); + spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock, + flags); + return NULL; + } + /* new->lap = orig->lap; => done in the memcpy() */ + /* new->slsap_sel = orig->slsap_sel; => done in the memcpy() */ + new->conn_skb = NULL; + + spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock, flags); + + /* Not everything is the same */ + new->notify.instance = instance; + + init_timer(&new->watchdog_timer); + + hashbin_insert(irlmp->unconnected_lsaps, (irda_queue_t *) new, + (long) new, NULL); + +#ifdef CONFIG_IRDA_CACHE_LAST_LSAP + /* Make sure that we invalidate the LSAP cache */ + new->lap->cache.valid = FALSE; +#endif /* CONFIG_IRDA_CACHE_LAST_LSAP */ + + return new; +} + +/* + * Function irlmp_disconnect_request (handle, userdata) + * + * The service user is requesting disconnection, this will not remove the + * LSAP, but only mark it as disconnected + */ +int irlmp_disconnect_request(struct lsap_cb *self, struct sk_buff *userdata) +{ + struct lsap_cb *lsap; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); + IRDA_ASSERT(userdata != NULL, return -1;); + + /* Already disconnected ? + * There is a race condition between irlmp_disconnect_indication() + * and us that might mess up the hashbins below. This fixes it. + * Jean II */ + if (! test_and_clear_bit(0, &self->connected)) { + pr_debug("%s(), already disconnected!\n", __func__); + dev_kfree_skb(userdata); + return -1; + } + + skb_push(userdata, LMP_CONTROL_HEADER); + + /* + * Do the event before the other stuff since we must know + * which lap layer that the frame should be transmitted on + */ + irlmp_do_lsap_event(self, LM_DISCONNECT_REQUEST, userdata); + + /* Drop reference count - see irlap_data_request(). */ + dev_kfree_skb(userdata); + + /* + * Remove LSAP from list of connected LSAPs for the particular link + * and insert it into the list of unconnected LSAPs + */ + IRDA_ASSERT(self->lap != NULL, return -1;); + IRDA_ASSERT(self->lap->magic == LMP_LAP_MAGIC, return -1;); + IRDA_ASSERT(self->lap->lsaps != NULL, return -1;); + + lsap = hashbin_remove(self->lap->lsaps, (long) self, NULL); +#ifdef CONFIG_IRDA_CACHE_LAST_LSAP + self->lap->cache.valid = FALSE; +#endif + + IRDA_ASSERT(lsap != NULL, return -1;); + IRDA_ASSERT(lsap->magic == LMP_LSAP_MAGIC, return -1;); + IRDA_ASSERT(lsap == self, return -1;); + + hashbin_insert(irlmp->unconnected_lsaps, (irda_queue_t *) self, + (long) self, NULL); + + /* Reset some values */ + self->dlsap_sel = LSAP_ANY; + self->lap = NULL; + + return 0; +} +EXPORT_SYMBOL(irlmp_disconnect_request); + +/* + * Function irlmp_disconnect_indication (reason, userdata) + * + * LSAP is being closed! + */ +void irlmp_disconnect_indication(struct lsap_cb *self, LM_REASON reason, + struct sk_buff *skb) +{ + struct lsap_cb *lsap; + + pr_debug("%s(), reason=%s [%d]\n", __func__, + irlmp_reason_str(reason), reason); + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;); + + pr_debug("%s(), slsap_sel=%02x, dlsap_sel=%02x\n", + __func__, self->slsap_sel, self->dlsap_sel); + + /* Already disconnected ? + * There is a race condition between irlmp_disconnect_request() + * and us that might mess up the hashbins below. This fixes it. + * Jean II */ + if (! test_and_clear_bit(0, &self->connected)) { + pr_debug("%s(), already disconnected!\n", __func__); + return; + } + + /* + * Remove association between this LSAP and the link it used + */ + IRDA_ASSERT(self->lap != NULL, return;); + IRDA_ASSERT(self->lap->lsaps != NULL, return;); + + lsap = hashbin_remove(self->lap->lsaps, (long) self, NULL); +#ifdef CONFIG_IRDA_CACHE_LAST_LSAP + self->lap->cache.valid = FALSE; +#endif + + IRDA_ASSERT(lsap != NULL, return;); + IRDA_ASSERT(lsap == self, return;); + hashbin_insert(irlmp->unconnected_lsaps, (irda_queue_t *) lsap, + (long) lsap, NULL); + + self->dlsap_sel = LSAP_ANY; + self->lap = NULL; + + /* + * Inform service user + */ + if (self->notify.disconnect_indication) { + /* Don't forget to refcount it - see irlap_driver_rcv(). */ + if(skb) + skb_get(skb); + self->notify.disconnect_indication(self->notify.instance, + self, reason, skb); + } else { + pr_debug("%s(), no handler\n", __func__); + } +} + +/* + * Function irlmp_do_expiry (void) + * + * Do a cleanup of the discovery log (remove old entries) + * + * Note : separate from irlmp_do_discovery() so that we can handle + * passive discovery properly. + */ +void irlmp_do_expiry(void) +{ + struct lap_cb *lap; + + /* + * Expire discovery on all links which are *not* connected. + * On links which are connected, we can't do discovery + * anymore and can't refresh the log, so we freeze the + * discovery log to keep info about the device we are + * connected to. + * This info is mandatory if we want irlmp_connect_request() + * to work properly. - Jean II + */ + lap = (struct lap_cb *) hashbin_get_first(irlmp->links); + while (lap != NULL) { + IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, return;); + + if (lap->lap_state == LAP_STANDBY) { + /* Expire discoveries discovered on this link */ + irlmp_expire_discoveries(irlmp->cachelog, lap->saddr, + FALSE); + } + lap = (struct lap_cb *) hashbin_get_next(irlmp->links); + } +} + +/* + * Function irlmp_do_discovery (nslots) + * + * Do some discovery on all links + * + * Note : log expiry is done above. + */ +void irlmp_do_discovery(int nslots) +{ + struct lap_cb *lap; + __u16 *data_hintsp; + + /* Make sure the value is sane */ + if ((nslots != 1) && (nslots != 6) && (nslots != 8) && (nslots != 16)){ + net_warn_ratelimited("%s: invalid value for number of slots!\n", + __func__); + nslots = sysctl_discovery_slots = 8; + } + + /* Construct new discovery info to be used by IrLAP, */ + data_hintsp = (__u16 *) irlmp->discovery_cmd.data.hints; + put_unaligned(irlmp->hints.word, data_hintsp); + + /* + * Set character set for device name (we use ASCII), and + * copy device name. Remember to make room for a \0 at the + * end + */ + irlmp->discovery_cmd.data.charset = CS_ASCII; + strncpy(irlmp->discovery_cmd.data.info, sysctl_devname, + NICKNAME_MAX_LEN); + irlmp->discovery_cmd.name_len = strlen(irlmp->discovery_cmd.data.info); + irlmp->discovery_cmd.nslots = nslots; + + /* + * Try to send discovery packets on all links + */ + lap = (struct lap_cb *) hashbin_get_first(irlmp->links); + while (lap != NULL) { + IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, return;); + + if (lap->lap_state == LAP_STANDBY) { + /* Try to discover */ + irlmp_do_lap_event(lap, LM_LAP_DISCOVERY_REQUEST, + NULL); + } + lap = (struct lap_cb *) hashbin_get_next(irlmp->links); + } +} + +/* + * Function irlmp_discovery_request (nslots) + * + * Do a discovery of devices in front of the computer + * + * If the caller has registered a client discovery callback, this + * allow him to receive the full content of the discovery log through + * this callback (as normally he will receive only new discoveries). + */ +void irlmp_discovery_request(int nslots) +{ + /* Return current cached discovery log (in full) */ + irlmp_discovery_confirm(irlmp->cachelog, DISCOVERY_LOG); + + /* + * Start a single discovery operation if discovery is not already + * running + */ + if (!sysctl_discovery) { + /* Check if user wants to override the default */ + if (nslots == DISCOVERY_DEFAULT_SLOTS) + nslots = sysctl_discovery_slots; + + irlmp_do_discovery(nslots); + /* Note : we never do expiry here. Expiry will run on the + * discovery timer regardless of the state of sysctl_discovery + * Jean II */ + } +} +EXPORT_SYMBOL(irlmp_discovery_request); + +/* + * Function irlmp_get_discoveries (pn, mask, slots) + * + * Return the current discovery log + * + * If discovery is not enabled, you should call this function again + * after 1 or 2 seconds (i.e. after discovery has been done). + */ +struct irda_device_info *irlmp_get_discoveries(int *pn, __u16 mask, int nslots) +{ + /* If discovery is not enabled, it's likely that the discovery log + * will be empty. So, we trigger a single discovery, so that next + * time the user call us there might be some results in the log. + * Jean II + */ + if (!sysctl_discovery) { + /* Check if user wants to override the default */ + if (nslots == DISCOVERY_DEFAULT_SLOTS) + nslots = sysctl_discovery_slots; + + /* Start discovery - will complete sometime later */ + irlmp_do_discovery(nslots); + /* Note : we never do expiry here. Expiry will run on the + * discovery timer regardless of the state of sysctl_discovery + * Jean II */ + } + + /* Return current cached discovery log */ + return irlmp_copy_discoveries(irlmp->cachelog, pn, mask, TRUE); +} +EXPORT_SYMBOL(irlmp_get_discoveries); + +/* + * Function irlmp_notify_client (log) + * + * Notify all about discovered devices + * + * Clients registered with IrLMP are : + * o IrComm + * o IrLAN + * o Any socket (in any state - ouch, that may be a lot !) + * The client may have defined a callback to be notified in case of + * partial/selective discovery based on the hints that it passed to IrLMP. + */ +static inline void +irlmp_notify_client(irlmp_client_t *client, + hashbin_t *log, DISCOVERY_MODE mode) +{ + discinfo_t *discoveries; /* Copy of the discovery log */ + int number; /* Number of nodes in the log */ + int i; + + /* Check if client wants or not partial/selective log (optimisation) */ + if (!client->disco_callback) + return; + + /* + * Locking notes : + * the old code was manipulating the log directly, which was + * very racy. Now, we use copy_discoveries, that protects + * itself while dumping the log for us. + * The overhead of the copy is compensated by the fact that + * we only pass new discoveries in normal mode and don't + * pass the same old entry every 3s to the caller as we used + * to do (virtual function calling is expensive). + * Jean II + */ + + /* + * Now, check all discovered devices (if any), and notify client + * only about the services that the client is interested in + * We also notify only about the new devices unless the caller + * explicitly request a dump of the log. Jean II + */ + discoveries = irlmp_copy_discoveries(log, &number, + client->hint_mask.word, + (mode == DISCOVERY_LOG)); + /* Check if the we got some results */ + if (discoveries == NULL) + return; /* No nodes discovered */ + + /* Pass all entries to the listener */ + for(i = 0; i < number; i++) + client->disco_callback(&(discoveries[i]), mode, client->priv); + + /* Free up our buffer */ + kfree(discoveries); +} + +/* + * Function irlmp_discovery_confirm ( self, log) + * + * Some device(s) answered to our discovery request! Check to see which + * device it is, and give indication to the client(s) + * + */ +void irlmp_discovery_confirm(hashbin_t *log, DISCOVERY_MODE mode) +{ + irlmp_client_t *client; + irlmp_client_t *client_next; + + IRDA_ASSERT(log != NULL, return;); + + if (!(HASHBIN_GET_SIZE(log))) + return; + + /* For each client - notify callback may touch client list */ + client = (irlmp_client_t *) hashbin_get_first(irlmp->clients); + while (NULL != hashbin_find_next(irlmp->clients, (long) client, NULL, + (void *) &client_next) ) { + /* Check if we should notify client */ + irlmp_notify_client(client, log, mode); + + client = client_next; + } +} + +/* + * Function irlmp_discovery_expiry (expiry) + * + * This device is no longer been discovered, and therefore it is being + * purged from the discovery log. Inform all clients who have + * registered for this event... + * + * Note : called exclusively from discovery.c + * Note : this is no longer called under discovery spinlock, so the + * client can do whatever he wants in the callback. + */ +void irlmp_discovery_expiry(discinfo_t *expiries, int number) +{ + irlmp_client_t *client; + irlmp_client_t *client_next; + int i; + + IRDA_ASSERT(expiries != NULL, return;); + + /* For each client - notify callback may touch client list */ + client = (irlmp_client_t *) hashbin_get_first(irlmp->clients); + while (NULL != hashbin_find_next(irlmp->clients, (long) client, NULL, + (void *) &client_next) ) { + + /* Pass all entries to the listener */ + for(i = 0; i < number; i++) { + /* Check if we should notify client */ + if ((client->expir_callback) && + (client->hint_mask.word & + get_unaligned((__u16 *)expiries[i].hints) + & 0x7f7f) ) + client->expir_callback(&(expiries[i]), + EXPIRY_TIMEOUT, + client->priv); + } + + /* Next client */ + client = client_next; + } +} + +/* + * Function irlmp_get_discovery_response () + * + * Used by IrLAP to get the discovery info it needs when answering + * discovery requests by other devices. + */ +discovery_t *irlmp_get_discovery_response(void) +{ + IRDA_ASSERT(irlmp != NULL, return NULL;); + + put_unaligned(irlmp->hints.word, (__u16 *)irlmp->discovery_rsp.data.hints); + + /* + * Set character set for device name (we use ASCII), and + * copy device name. Remember to make room for a \0 at the + * end + */ + irlmp->discovery_rsp.data.charset = CS_ASCII; + + strncpy(irlmp->discovery_rsp.data.info, sysctl_devname, + NICKNAME_MAX_LEN); + irlmp->discovery_rsp.name_len = strlen(irlmp->discovery_rsp.data.info); + + return &irlmp->discovery_rsp; +} + +/* + * Function irlmp_data_request (self, skb) + * + * Send some data to peer device + * + * Note on skb management : + * After calling the lower layers of the IrDA stack, we always + * kfree() the skb, which drop the reference count (and potentially + * destroy it). + * IrLMP and IrLAP may queue the packet, and in those cases will need + * to use skb_get() to keep it around. + * Jean II + */ +int irlmp_data_request(struct lsap_cb *self, struct sk_buff *userdata) +{ + int ret; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); + + /* Make room for MUX header */ + IRDA_ASSERT(skb_headroom(userdata) >= LMP_HEADER, return -1;); + skb_push(userdata, LMP_HEADER); + + ret = irlmp_do_lsap_event(self, LM_DATA_REQUEST, userdata); + + /* Drop reference count - see irlap_data_request(). */ + dev_kfree_skb(userdata); + + return ret; +} +EXPORT_SYMBOL(irlmp_data_request); + +/* + * Function irlmp_data_indication (handle, skb) + * + * Got data from LAP layer so pass it up to upper layer + * + */ +void irlmp_data_indication(struct lsap_cb *self, struct sk_buff *skb) +{ + /* Hide LMP header from layer above */ + skb_pull(skb, LMP_HEADER); + + if (self->notify.data_indication) { + /* Don't forget to refcount it - see irlap_driver_rcv(). */ + skb_get(skb); + self->notify.data_indication(self->notify.instance, self, skb); + } +} + +/* + * Function irlmp_udata_request (self, skb) + */ +int irlmp_udata_request(struct lsap_cb *self, struct sk_buff *userdata) +{ + int ret; + + IRDA_ASSERT(userdata != NULL, return -1;); + + /* Make room for MUX header */ + IRDA_ASSERT(skb_headroom(userdata) >= LMP_HEADER, return -1;); + skb_push(userdata, LMP_HEADER); + + ret = irlmp_do_lsap_event(self, LM_UDATA_REQUEST, userdata); + + /* Drop reference count - see irlap_data_request(). */ + dev_kfree_skb(userdata); + + return ret; +} + +/* + * Function irlmp_udata_indication (self, skb) + * + * Send unreliable data (but still within the connection) + * + */ +void irlmp_udata_indication(struct lsap_cb *self, struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;); + IRDA_ASSERT(skb != NULL, return;); + + /* Hide LMP header from layer above */ + skb_pull(skb, LMP_HEADER); + + if (self->notify.udata_indication) { + /* Don't forget to refcount it - see irlap_driver_rcv(). */ + skb_get(skb); + self->notify.udata_indication(self->notify.instance, self, + skb); + } +} + +/* + * Function irlmp_connless_data_request (self, skb) + */ +#ifdef CONFIG_IRDA_ULTRA +int irlmp_connless_data_request(struct lsap_cb *self, struct sk_buff *userdata, + __u8 pid) +{ + struct sk_buff *clone_skb; + struct lap_cb *lap; + + IRDA_ASSERT(userdata != NULL, return -1;); + + /* Make room for MUX and PID header */ + IRDA_ASSERT(skb_headroom(userdata) >= LMP_HEADER+LMP_PID_HEADER, + return -1;); + + /* Insert protocol identifier */ + skb_push(userdata, LMP_PID_HEADER); + if(self != NULL) + userdata->data[0] = self->pid; + else + userdata->data[0] = pid; + + /* Connectionless sockets must use 0x70 */ + skb_push(userdata, LMP_HEADER); + userdata->data[0] = userdata->data[1] = LSAP_CONNLESS; + + /* Try to send Connectionless packets out on all links */ + lap = (struct lap_cb *) hashbin_get_first(irlmp->links); + while (lap != NULL) { + IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, return -1;); + + clone_skb = skb_clone(userdata, GFP_ATOMIC); + if (!clone_skb) { + dev_kfree_skb(userdata); + return -ENOMEM; + } + + irlap_unitdata_request(lap->irlap, clone_skb); + /* irlap_unitdata_request() don't increase refcount, + * so no dev_kfree_skb() - Jean II */ + + lap = (struct lap_cb *) hashbin_get_next(irlmp->links); + } + dev_kfree_skb(userdata); + + return 0; +} +#endif /* CONFIG_IRDA_ULTRA */ + +/* + * Function irlmp_connless_data_indication (self, skb) + * + * Receive unreliable data outside any connection. Mostly used by Ultra + * + */ +#ifdef CONFIG_IRDA_ULTRA +void irlmp_connless_data_indication(struct lsap_cb *self, struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;); + IRDA_ASSERT(skb != NULL, return;); + + /* Hide LMP and PID header from layer above */ + skb_pull(skb, LMP_HEADER+LMP_PID_HEADER); + + if (self->notify.udata_indication) { + /* Don't forget to refcount it - see irlap_driver_rcv(). */ + skb_get(skb); + self->notify.udata_indication(self->notify.instance, self, + skb); + } +} +#endif /* CONFIG_IRDA_ULTRA */ + +/* + * Propagate status indication from LAP to LSAPs (via LMP) + * This don't trigger any change of state in lap_cb, lmp_cb or lsap_cb, + * and the event is stateless, therefore we can bypass both state machines + * and send the event direct to the LSAP user. + * Jean II + */ +void irlmp_status_indication(struct lap_cb *self, + LINK_STATUS link, LOCK_STATUS lock) +{ + struct lsap_cb *next; + struct lsap_cb *curr; + + /* Send status_indication to all LSAPs using this link */ + curr = (struct lsap_cb *) hashbin_get_first( self->lsaps); + while (NULL != hashbin_find_next(self->lsaps, (long) curr, NULL, + (void *) &next) ) { + IRDA_ASSERT(curr->magic == LMP_LSAP_MAGIC, return;); + /* + * Inform service user if he has requested it + */ + if (curr->notify.status_indication != NULL) + curr->notify.status_indication(curr->notify.instance, + link, lock); + else + pr_debug("%s(), no handler\n", __func__); + + curr = next; + } +} + +/* + * Receive flow control indication from LAP. + * LAP want us to send it one more frame. We implement a simple round + * robin scheduler between the active sockets so that we get a bit of + * fairness. Note that the round robin is far from perfect, but it's + * better than nothing. + * We then poll the selected socket so that we can do synchronous + * refilling of IrLAP (which allow to minimise the number of buffers). + * Jean II + */ +void irlmp_flow_indication(struct lap_cb *self, LOCAL_FLOW flow) +{ + struct lsap_cb *next; + struct lsap_cb *curr; + int lsap_todo; + + IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;); + IRDA_ASSERT(flow == FLOW_START, return;); + + /* Get the number of lsap. That's the only safe way to know + * that we have looped around... - Jean II */ + lsap_todo = HASHBIN_GET_SIZE(self->lsaps); + pr_debug("%s() : %d lsaps to scan\n", __func__, lsap_todo); + + /* Poll lsap in order until the queue is full or until we + * tried them all. + * Most often, the current LSAP will have something to send, + * so we will go through this loop only once. - Jean II */ + while((lsap_todo--) && + (IRLAP_GET_TX_QUEUE_LEN(self->irlap) < LAP_HIGH_THRESHOLD)) { + /* Try to find the next lsap we should poll. */ + next = self->flow_next; + /* If we have no lsap, restart from first one */ + if(next == NULL) + next = (struct lsap_cb *) hashbin_get_first(self->lsaps); + /* Verify current one and find the next one */ + curr = hashbin_find_next(self->lsaps, (long) next, NULL, + (void *) &self->flow_next); + /* Uh-oh... Paranoia */ + if(curr == NULL) + break; + pr_debug("%s() : curr is %p, next was %p and is now %p, still %d to go - queue len = %d\n", + __func__, curr, next, self->flow_next, lsap_todo, + IRLAP_GET_TX_QUEUE_LEN(self->irlap)); + + /* Inform lsap user that it can send one more packet. */ + if (curr->notify.flow_indication != NULL) + curr->notify.flow_indication(curr->notify.instance, + curr, flow); + else + pr_debug("%s(), no handler\n", __func__); + } +} + +#if 0 +/* + * Function irlmp_hint_to_service (hint) + * + * Returns a list of all servics contained in the given hint bits. This + * function assumes that the hint bits have the size of two bytes only + */ +__u8 *irlmp_hint_to_service(__u8 *hint) +{ + __u8 *service; + int i = 0; + + /* + * Allocate array to store services in. 16 entries should be safe + * since we currently only support 2 hint bytes + */ + service = kmalloc(16, GFP_ATOMIC); + if (!service) + return NULL; + + if (!hint[0]) { + pr_debug("<None>\n"); + kfree(service); + return NULL; + } + if (hint[0] & HINT_PNP) + pr_debug("PnP Compatible "); + if (hint[0] & HINT_PDA) + pr_debug("PDA/Palmtop "); + if (hint[0] & HINT_COMPUTER) + pr_debug("Computer "); + if (hint[0] & HINT_PRINTER) { + pr_debug("Printer "); + service[i++] = S_PRINTER; + } + if (hint[0] & HINT_MODEM) + pr_debug("Modem "); + if (hint[0] & HINT_FAX) + pr_debug("Fax "); + if (hint[0] & HINT_LAN) { + pr_debug("LAN Access "); + service[i++] = S_LAN; + } + /* + * Test if extension byte exists. This byte will usually be + * there, but this is not really required by the standard. + * (IrLMP p. 29) + */ + if (hint[0] & HINT_EXTENSION) { + if (hint[1] & HINT_TELEPHONY) { + pr_debug("Telephony "); + service[i++] = S_TELEPHONY; + } + if (hint[1] & HINT_FILE_SERVER) + pr_debug("File Server "); + + if (hint[1] & HINT_COMM) { + pr_debug("IrCOMM "); + service[i++] = S_COMM; + } + if (hint[1] & HINT_OBEX) { + pr_debug("IrOBEX "); + service[i++] = S_OBEX; + } + } + pr_debug("\n"); + + /* So that client can be notified about any discovery */ + service[i++] = S_ANY; + + service[i] = S_END; + + return service; +} +#endif + +static const __u16 service_hint_mapping[S_END][2] = { + { HINT_PNP, 0 }, /* S_PNP */ + { HINT_PDA, 0 }, /* S_PDA */ + { HINT_COMPUTER, 0 }, /* S_COMPUTER */ + { HINT_PRINTER, 0 }, /* S_PRINTER */ + { HINT_MODEM, 0 }, /* S_MODEM */ + { HINT_FAX, 0 }, /* S_FAX */ + { HINT_LAN, 0 }, /* S_LAN */ + { HINT_EXTENSION, HINT_TELEPHONY }, /* S_TELEPHONY */ + { HINT_EXTENSION, HINT_COMM }, /* S_COMM */ + { HINT_EXTENSION, HINT_OBEX }, /* S_OBEX */ + { 0xFF, 0xFF }, /* S_ANY */ +}; + +/* + * Function irlmp_service_to_hint (service) + * + * Converts a service type, to a hint bit + * + * Returns: a 16 bit hint value, with the service bit set + */ +__u16 irlmp_service_to_hint(int service) +{ + __u16_host_order hint; + + hint.byte[0] = service_hint_mapping[service][0]; + hint.byte[1] = service_hint_mapping[service][1]; + + return hint.word; +} +EXPORT_SYMBOL(irlmp_service_to_hint); + +/* + * Function irlmp_register_service (service) + * + * Register local service with IrLMP + * + */ +void *irlmp_register_service(__u16 hints) +{ + irlmp_service_t *service; + + pr_debug("%s(), hints = %04x\n", __func__, hints); + + /* Make a new registration */ + service = kmalloc(sizeof(irlmp_service_t), GFP_ATOMIC); + if (!service) + return NULL; + + service->hints.word = hints; + hashbin_insert(irlmp->services, (irda_queue_t *) service, + (long) service, NULL); + + irlmp->hints.word |= hints; + + return (void *)service; +} +EXPORT_SYMBOL(irlmp_register_service); + +/* + * Function irlmp_unregister_service (handle) + * + * Unregister service with IrLMP. + * + * Returns: 0 on success, -1 on error + */ +int irlmp_unregister_service(void *handle) +{ + irlmp_service_t *service; + unsigned long flags; + + if (!handle) + return -1; + + /* Caller may call with invalid handle (it's legal) - Jean II */ + service = hashbin_lock_find(irlmp->services, (long) handle, NULL); + if (!service) { + pr_debug("%s(), Unknown service!\n", __func__); + return -1; + } + + hashbin_remove_this(irlmp->services, (irda_queue_t *) service); + kfree(service); + + /* Remove old hint bits */ + irlmp->hints.word = 0; + + /* Refresh current hint bits */ + spin_lock_irqsave(&irlmp->services->hb_spinlock, flags); + service = (irlmp_service_t *) hashbin_get_first(irlmp->services); + while (service) { + irlmp->hints.word |= service->hints.word; + + service = (irlmp_service_t *)hashbin_get_next(irlmp->services); + } + spin_unlock_irqrestore(&irlmp->services->hb_spinlock, flags); + return 0; +} +EXPORT_SYMBOL(irlmp_unregister_service); + +/* + * Function irlmp_register_client (hint_mask, callback1, callback2) + * + * Register a local client with IrLMP + * First callback is selective discovery (based on hints) + * Second callback is for selective discovery expiries + * + * Returns: handle > 0 on success, 0 on error + */ +void *irlmp_register_client(__u16 hint_mask, DISCOVERY_CALLBACK1 disco_clb, + DISCOVERY_CALLBACK2 expir_clb, void *priv) +{ + irlmp_client_t *client; + + IRDA_ASSERT(irlmp != NULL, return NULL;); + + /* Make a new registration */ + client = kmalloc(sizeof(irlmp_client_t), GFP_ATOMIC); + if (!client) + return NULL; + + /* Register the details */ + client->hint_mask.word = hint_mask; + client->disco_callback = disco_clb; + client->expir_callback = expir_clb; + client->priv = priv; + + hashbin_insert(irlmp->clients, (irda_queue_t *) client, + (long) client, NULL); + + return (void *) client; +} +EXPORT_SYMBOL(irlmp_register_client); + +/* + * Function irlmp_update_client (handle, hint_mask, callback1, callback2) + * + * Updates specified client (handle) with possibly new hint_mask and + * callback + * + * Returns: 0 on success, -1 on error + */ +int irlmp_update_client(void *handle, __u16 hint_mask, + DISCOVERY_CALLBACK1 disco_clb, + DISCOVERY_CALLBACK2 expir_clb, void *priv) +{ + irlmp_client_t *client; + + if (!handle) + return -1; + + client = hashbin_lock_find(irlmp->clients, (long) handle, NULL); + if (!client) { + pr_debug("%s(), Unknown client!\n", __func__); + return -1; + } + + client->hint_mask.word = hint_mask; + client->disco_callback = disco_clb; + client->expir_callback = expir_clb; + client->priv = priv; + + return 0; +} +EXPORT_SYMBOL(irlmp_update_client); + +/* + * Function irlmp_unregister_client (handle) + * + * Returns: 0 on success, -1 on error + * + */ +int irlmp_unregister_client(void *handle) +{ + struct irlmp_client *client; + + if (!handle) + return -1; + + /* Caller may call with invalid handle (it's legal) - Jean II */ + client = hashbin_lock_find(irlmp->clients, (long) handle, NULL); + if (!client) { + pr_debug("%s(), Unknown client!\n", __func__); + return -1; + } + + pr_debug("%s(), removing client!\n", __func__); + hashbin_remove_this(irlmp->clients, (irda_queue_t *) client); + kfree(client); + + return 0; +} +EXPORT_SYMBOL(irlmp_unregister_client); + +/* + * Function irlmp_slsap_inuse (slsap) + * + * Check if the given source LSAP selector is in use + * + * This function is clearly not very efficient. On the mitigating side, the + * stack make sure that in 99% of the cases, we are called only once + * for each socket allocation. We could probably keep a bitmap + * of the allocated LSAP, but I'm not sure the complexity is worth it. + * Jean II + */ +static int irlmp_slsap_inuse(__u8 slsap_sel) +{ + struct lsap_cb *self; + struct lap_cb *lap; + unsigned long flags; + + IRDA_ASSERT(irlmp != NULL, return TRUE;); + IRDA_ASSERT(irlmp->magic == LMP_MAGIC, return TRUE;); + IRDA_ASSERT(slsap_sel != LSAP_ANY, return TRUE;); + +#ifdef CONFIG_IRDA_ULTRA + /* Accept all bindings to the connectionless LSAP */ + if (slsap_sel == LSAP_CONNLESS) + return FALSE; +#endif /* CONFIG_IRDA_ULTRA */ + + /* Valid values are between 0 and 127 (0x0-0x6F) */ + if (slsap_sel > LSAP_MAX) + return TRUE; + + /* + * Check if slsap is already in use. To do this we have to loop over + * every IrLAP connection and check every LSAP associated with each + * the connection. + */ + spin_lock_irqsave_nested(&irlmp->links->hb_spinlock, flags, + SINGLE_DEPTH_NESTING); + lap = (struct lap_cb *) hashbin_get_first(irlmp->links); + while (lap != NULL) { + IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, goto errlap;); + + /* Careful for priority inversions here ! + * irlmp->links is never taken while another IrDA + * spinlock is held, so we are safe. Jean II */ + spin_lock(&lap->lsaps->hb_spinlock); + + /* For this IrLAP, check all the LSAPs */ + self = (struct lsap_cb *) hashbin_get_first(lap->lsaps); + while (self != NULL) { + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, + goto errlsap;); + + if ((self->slsap_sel == slsap_sel)) { + pr_debug("Source LSAP selector=%02x in use\n", + self->slsap_sel); + goto errlsap; + } + self = (struct lsap_cb*) hashbin_get_next(lap->lsaps); + } + spin_unlock(&lap->lsaps->hb_spinlock); + + /* Next LAP */ + lap = (struct lap_cb *) hashbin_get_next(irlmp->links); + } + spin_unlock_irqrestore(&irlmp->links->hb_spinlock, flags); + + /* + * Server sockets are typically waiting for connections and + * therefore reside in the unconnected list. We don't want + * to give out their LSAPs for obvious reasons... + * Jean II + */ + spin_lock_irqsave(&irlmp->unconnected_lsaps->hb_spinlock, flags); + + self = (struct lsap_cb *) hashbin_get_first(irlmp->unconnected_lsaps); + while (self != NULL) { + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, goto erruncon;); + if ((self->slsap_sel == slsap_sel)) { + pr_debug("Source LSAP selector=%02x in use (unconnected)\n", + self->slsap_sel); + goto erruncon; + } + self = (struct lsap_cb*) hashbin_get_next(irlmp->unconnected_lsaps); + } + spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock, flags); + + return FALSE; + + /* Error exit from within one of the two nested loops. + * Make sure we release the right spinlock in the righ order. + * Jean II */ +errlsap: + spin_unlock(&lap->lsaps->hb_spinlock); +IRDA_ASSERT_LABEL(errlap:) + spin_unlock_irqrestore(&irlmp->links->hb_spinlock, flags); + return TRUE; + + /* Error exit from within the unconnected loop. + * Just one spinlock to release... Jean II */ +erruncon: + spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock, flags); + return TRUE; +} + +/* + * Function irlmp_find_free_slsap () + * + * Find a free source LSAP to use. This function is called if the service + * user has requested a source LSAP equal to LM_ANY + */ +static __u8 irlmp_find_free_slsap(void) +{ + __u8 lsap_sel; + int wrapped = 0; + + IRDA_ASSERT(irlmp != NULL, return -1;); + IRDA_ASSERT(irlmp->magic == LMP_MAGIC, return -1;); + + /* Most users don't really care which LSAPs they are given, + * and therefore we automatically give them a free LSAP. + * This function try to find a suitable LSAP, i.e. which is + * not in use and is within the acceptable range. Jean II */ + + do { + /* Always increment to LSAP number before using it. + * In theory, we could reuse the last LSAP number, as long + * as it is no longer in use. Some IrDA stack do that. + * However, the previous socket may be half closed, i.e. + * we closed it, we think it's no longer in use, but the + * other side did not receive our close and think it's + * active and still send data on it. + * This is similar to what is done with PIDs and TCP ports. + * Also, this reduce the number of calls to irlmp_slsap_inuse() + * which is an expensive function to call. + * Jean II */ + irlmp->last_lsap_sel++; + + /* Check if we need to wraparound (0x70-0x7f are reserved) */ + if (irlmp->last_lsap_sel > LSAP_MAX) { + /* 0x00-0x10 are also reserved for well know ports */ + irlmp->last_lsap_sel = 0x10; + + /* Make sure we terminate the loop */ + if (wrapped++) { + net_err_ratelimited("%s: no more free LSAPs !\n", + __func__); + return 0; + } + } + + /* If the LSAP is in use, try the next one. + * Despite the autoincrement, we need to check if the lsap + * is really in use or not, first because LSAP may be + * directly allocated in irlmp_open_lsap(), and also because + * we may wraparound on old sockets. Jean II */ + } while (irlmp_slsap_inuse(irlmp->last_lsap_sel)); + + /* Got it ! */ + lsap_sel = irlmp->last_lsap_sel; + pr_debug("%s(), found free lsap_sel=%02x\n", + __func__, lsap_sel); + + return lsap_sel; +} + +/* + * Function irlmp_convert_lap_reason (lap_reason) + * + * Converts IrLAP disconnect reason codes to IrLMP disconnect reason + * codes + * + */ +LM_REASON irlmp_convert_lap_reason( LAP_REASON lap_reason) +{ + int reason = LM_LAP_DISCONNECT; + + switch (lap_reason) { + case LAP_DISC_INDICATION: /* Received a disconnect request from peer */ + pr_debug("%s(), LAP_DISC_INDICATION\n", __func__); + reason = LM_USER_REQUEST; + break; + case LAP_NO_RESPONSE: /* To many retransmits without response */ + pr_debug("%s(), LAP_NO_RESPONSE\n", __func__); + reason = LM_LAP_DISCONNECT; + break; + case LAP_RESET_INDICATION: + pr_debug("%s(), LAP_RESET_INDICATION\n", __func__); + reason = LM_LAP_RESET; + break; + case LAP_FOUND_NONE: + case LAP_MEDIA_BUSY: + case LAP_PRIMARY_CONFLICT: + pr_debug("%s(), LAP_FOUND_NONE, LAP_MEDIA_BUSY or LAP_PRIMARY_CONFLICT\n", + __func__); + reason = LM_CONNECT_FAILURE; + break; + default: + pr_debug("%s(), Unknown IrLAP disconnect reason %d!\n", + __func__, lap_reason); + reason = LM_LAP_DISCONNECT; + break; + } + + return reason; +} + +#ifdef CONFIG_PROC_FS + +struct irlmp_iter_state { + hashbin_t *hashbin; +}; + +#define LSAP_START_TOKEN ((void *)1) +#define LINK_START_TOKEN ((void *)2) + +static void *irlmp_seq_hb_idx(struct irlmp_iter_state *iter, loff_t *off) +{ + void *element; + + spin_lock_irq(&iter->hashbin->hb_spinlock); + for (element = hashbin_get_first(iter->hashbin); + element != NULL; + element = hashbin_get_next(iter->hashbin)) { + if (!off || *off-- == 0) { + /* NB: hashbin left locked */ + return element; + } + } + spin_unlock_irq(&iter->hashbin->hb_spinlock); + iter->hashbin = NULL; + return NULL; +} + + +static void *irlmp_seq_start(struct seq_file *seq, loff_t *pos) +{ + struct irlmp_iter_state *iter = seq->private; + void *v; + loff_t off = *pos; + + iter->hashbin = NULL; + if (off-- == 0) + return LSAP_START_TOKEN; + + iter->hashbin = irlmp->unconnected_lsaps; + v = irlmp_seq_hb_idx(iter, &off); + if (v) + return v; + + if (off-- == 0) + return LINK_START_TOKEN; + + iter->hashbin = irlmp->links; + return irlmp_seq_hb_idx(iter, &off); +} + +static void *irlmp_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + struct irlmp_iter_state *iter = seq->private; + + ++*pos; + + if (v == LSAP_START_TOKEN) { /* start of list of lsaps */ + iter->hashbin = irlmp->unconnected_lsaps; + v = irlmp_seq_hb_idx(iter, NULL); + return v ? v : LINK_START_TOKEN; + } + + if (v == LINK_START_TOKEN) { /* start of list of links */ + iter->hashbin = irlmp->links; + return irlmp_seq_hb_idx(iter, NULL); + } + + v = hashbin_get_next(iter->hashbin); + + if (v == NULL) { /* no more in this hash bin */ + spin_unlock_irq(&iter->hashbin->hb_spinlock); + + if (iter->hashbin == irlmp->unconnected_lsaps) + v = LINK_START_TOKEN; + + iter->hashbin = NULL; + } + return v; +} + +static void irlmp_seq_stop(struct seq_file *seq, void *v) +{ + struct irlmp_iter_state *iter = seq->private; + + if (iter->hashbin) + spin_unlock_irq(&iter->hashbin->hb_spinlock); +} + +static int irlmp_seq_show(struct seq_file *seq, void *v) +{ + const struct irlmp_iter_state *iter = seq->private; + struct lsap_cb *self = v; + + if (v == LSAP_START_TOKEN) + seq_puts(seq, "Unconnected LSAPs:\n"); + else if (v == LINK_START_TOKEN) + seq_puts(seq, "\nRegistered Link Layers:\n"); + else if (iter->hashbin == irlmp->unconnected_lsaps) { + self = v; + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -EINVAL; ); + seq_printf(seq, "lsap state: %s, ", + irlsap_state[ self->lsap_state]); + seq_printf(seq, + "slsap_sel: %#02x, dlsap_sel: %#02x, ", + self->slsap_sel, self->dlsap_sel); + seq_printf(seq, "(%s)", self->notify.name); + seq_printf(seq, "\n"); + } else if (iter->hashbin == irlmp->links) { + struct lap_cb *lap = v; + + seq_printf(seq, "lap state: %s, ", + irlmp_state[lap->lap_state]); + + seq_printf(seq, "saddr: %#08x, daddr: %#08x, ", + lap->saddr, lap->daddr); + seq_printf(seq, "num lsaps: %d", + HASHBIN_GET_SIZE(lap->lsaps)); + seq_printf(seq, "\n"); + + /* Careful for priority inversions here ! + * All other uses of attrib spinlock are independent of + * the object spinlock, so we are safe. Jean II */ + spin_lock(&lap->lsaps->hb_spinlock); + + seq_printf(seq, "\n Connected LSAPs:\n"); + for (self = (struct lsap_cb *) hashbin_get_first(lap->lsaps); + self != NULL; + self = (struct lsap_cb *)hashbin_get_next(lap->lsaps)) { + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, + goto outloop;); + seq_printf(seq, " lsap state: %s, ", + irlsap_state[ self->lsap_state]); + seq_printf(seq, + "slsap_sel: %#02x, dlsap_sel: %#02x, ", + self->slsap_sel, self->dlsap_sel); + seq_printf(seq, "(%s)", self->notify.name); + seq_putc(seq, '\n'); + + } + IRDA_ASSERT_LABEL(outloop:) + spin_unlock(&lap->lsaps->hb_spinlock); + seq_putc(seq, '\n'); + } else + return -EINVAL; + + return 0; +} + +static const struct seq_operations irlmp_seq_ops = { + .start = irlmp_seq_start, + .next = irlmp_seq_next, + .stop = irlmp_seq_stop, + .show = irlmp_seq_show, +}; + +static int irlmp_seq_open(struct inode *inode, struct file *file) +{ + IRDA_ASSERT(irlmp != NULL, return -EINVAL;); + + return seq_open_private(file, &irlmp_seq_ops, + sizeof(struct irlmp_iter_state)); +} + +const struct file_operations irlmp_seq_fops = { + .owner = THIS_MODULE, + .open = irlmp_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release_private, +}; + +#endif /* PROC_FS */ diff --git a/kernel/net/irda/irlmp_event.c b/kernel/net/irda/irlmp_event.c new file mode 100644 index 000000000..e306cf2c1 --- /dev/null +++ b/kernel/net/irda/irlmp_event.c @@ -0,0 +1,886 @@ +/********************************************************************* + * + * Filename: irlmp_event.c + * Version: 0.8 + * Description: An IrDA LMP event driver for Linux + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Mon Aug 4 20:40:53 1997 + * Modified at: Tue Dec 14 23:04:16 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no>, + * All Rights Reserved. + * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/kernel.h> + +#include <net/irda/irda.h> +#include <net/irda/timer.h> +#include <net/irda/irlap.h> +#include <net/irda/irlmp.h> +#include <net/irda/irlmp_frame.h> +#include <net/irda/irlmp_event.h> + +const char *const irlmp_state[] = { + "LAP_STANDBY", + "LAP_U_CONNECT", + "LAP_ACTIVE", +}; + +const char *const irlsap_state[] = { + "LSAP_DISCONNECTED", + "LSAP_CONNECT", + "LSAP_CONNECT_PEND", + "LSAP_DATA_TRANSFER_READY", + "LSAP_SETUP", + "LSAP_SETUP_PEND", +}; + +static const char *const irlmp_event[] __maybe_unused = { + "LM_CONNECT_REQUEST", + "LM_CONNECT_CONFIRM", + "LM_CONNECT_RESPONSE", + "LM_CONNECT_INDICATION", + + "LM_DISCONNECT_INDICATION", + "LM_DISCONNECT_REQUEST", + + "LM_DATA_REQUEST", + "LM_UDATA_REQUEST", + "LM_DATA_INDICATION", + "LM_UDATA_INDICATION", + + "LM_WATCHDOG_TIMEOUT", + + /* IrLAP events */ + "LM_LAP_CONNECT_REQUEST", + "LM_LAP_CONNECT_INDICATION", + "LM_LAP_CONNECT_CONFIRM", + "LM_LAP_DISCONNECT_INDICATION", + "LM_LAP_DISCONNECT_REQUEST", + "LM_LAP_DISCOVERY_REQUEST", + "LM_LAP_DISCOVERY_CONFIRM", + "LM_LAP_IDLE_TIMEOUT", +}; + +/* LAP Connection control proto declarations */ +static void irlmp_state_standby (struct lap_cb *, IRLMP_EVENT, + struct sk_buff *); +static void irlmp_state_u_connect(struct lap_cb *, IRLMP_EVENT, + struct sk_buff *); +static void irlmp_state_active (struct lap_cb *, IRLMP_EVENT, + struct sk_buff *); + +/* LSAP Connection control proto declarations */ +static int irlmp_state_disconnected(struct lsap_cb *, IRLMP_EVENT, + struct sk_buff *); +static int irlmp_state_connect (struct lsap_cb *, IRLMP_EVENT, + struct sk_buff *); +static int irlmp_state_connect_pend(struct lsap_cb *, IRLMP_EVENT, + struct sk_buff *); +static int irlmp_state_dtr (struct lsap_cb *, IRLMP_EVENT, + struct sk_buff *); +static int irlmp_state_setup (struct lsap_cb *, IRLMP_EVENT, + struct sk_buff *); +static int irlmp_state_setup_pend (struct lsap_cb *, IRLMP_EVENT, + struct sk_buff *); + +static void (*lap_state[]) (struct lap_cb *, IRLMP_EVENT, struct sk_buff *) = +{ + irlmp_state_standby, + irlmp_state_u_connect, + irlmp_state_active, +}; + +static int (*lsap_state[])( struct lsap_cb *, IRLMP_EVENT, struct sk_buff *) = +{ + irlmp_state_disconnected, + irlmp_state_connect, + irlmp_state_connect_pend, + irlmp_state_dtr, + irlmp_state_setup, + irlmp_state_setup_pend +}; + +static inline void irlmp_next_lap_state(struct lap_cb *self, + IRLMP_STATE state) +{ + /* + pr_debug("%s(), LMP LAP = %s\n", __func__, irlmp_state[state]); + */ + self->lap_state = state; +} + +static inline void irlmp_next_lsap_state(struct lsap_cb *self, + LSAP_STATE state) +{ + /* + IRDA_ASSERT(self != NULL, return;); + pr_debug("%s(), LMP LSAP = %s\n", __func__, irlsap_state[state]); + */ + self->lsap_state = state; +} + +/* Do connection control events */ +int irlmp_do_lsap_event(struct lsap_cb *self, IRLMP_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); + + pr_debug("%s(), EVENT = %s, STATE = %s\n", + __func__, irlmp_event[event], irlsap_state[self->lsap_state]); + + return (*lsap_state[self->lsap_state]) (self, event, skb); +} + +/* + * Function do_lap_event (event, skb, info) + * + * Do IrLAP control events + * + */ +void irlmp_do_lap_event(struct lap_cb *self, IRLMP_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;); + + pr_debug("%s(), EVENT = %s, STATE = %s\n", __func__, + irlmp_event[event], + irlmp_state[self->lap_state]); + + (*lap_state[self->lap_state]) (self, event, skb); +} + +void irlmp_discovery_timer_expired(void *data) +{ + /* We always cleanup the log (active & passive discovery) */ + irlmp_do_expiry(); + + irlmp_do_discovery(sysctl_discovery_slots); + + /* Restart timer */ + irlmp_start_discovery_timer(irlmp, sysctl_discovery_timeout * HZ); +} + +void irlmp_watchdog_timer_expired(void *data) +{ + struct lsap_cb *self = (struct lsap_cb *) data; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return;); + + irlmp_do_lsap_event(self, LM_WATCHDOG_TIMEOUT, NULL); +} + +void irlmp_idle_timer_expired(void *data) +{ + struct lap_cb *self = (struct lap_cb *) data; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;); + + irlmp_do_lap_event(self, LM_LAP_IDLE_TIMEOUT, NULL); +} + +/* + * Send an event on all LSAPs attached to this LAP. + */ +static inline void +irlmp_do_all_lsap_event(hashbin_t * lsap_hashbin, + IRLMP_EVENT event) +{ + struct lsap_cb *lsap; + struct lsap_cb *lsap_next; + + /* Note : this function use the new hashbin_find_next() + * function, instead of the old hashbin_get_next(). + * This make sure that we are always pointing one lsap + * ahead, so that if the current lsap is removed as the + * result of sending the event, we don't care. + * Also, as we store the context ourselves, if an enumeration + * of the same lsap hashbin happens as the result of sending the + * event, we don't care. + * The only problem is if the next lsap is removed. In that case, + * hashbin_find_next() will return NULL and we will abort the + * enumeration. - Jean II */ + + /* Also : we don't accept any skb in input. We can *NOT* pass + * the same skb to multiple clients safely, we would need to + * skb_clone() it. - Jean II */ + + lsap = (struct lsap_cb *) hashbin_get_first(lsap_hashbin); + + while (NULL != hashbin_find_next(lsap_hashbin, + (long) lsap, + NULL, + (void *) &lsap_next) ) { + irlmp_do_lsap_event(lsap, event, NULL); + lsap = lsap_next; + } +} + +/********************************************************************* + * + * LAP connection control states + * + ********************************************************************/ + +/* + * Function irlmp_state_standby (event, skb, info) + * + * STANDBY, The IrLAP connection does not exist. + * + */ +static void irlmp_state_standby(struct lap_cb *self, IRLMP_EVENT event, + struct sk_buff *skb) +{ + IRDA_ASSERT(self->irlap != NULL, return;); + + switch (event) { + case LM_LAP_DISCOVERY_REQUEST: + /* irlmp_next_station_state( LMP_DISCOVER); */ + + irlap_discovery_request(self->irlap, &irlmp->discovery_cmd); + break; + case LM_LAP_CONNECT_INDICATION: + /* It's important to switch state first, to avoid IrLMP to + * think that the link is free since IrLMP may then start + * discovery before the connection is properly set up. DB. + */ + irlmp_next_lap_state(self, LAP_ACTIVE); + + /* Just accept connection TODO, this should be fixed */ + irlap_connect_response(self->irlap, skb); + break; + case LM_LAP_CONNECT_REQUEST: + pr_debug("%s() LS_CONNECT_REQUEST\n", __func__); + + irlmp_next_lap_state(self, LAP_U_CONNECT); + + /* FIXME: need to set users requested QoS */ + irlap_connect_request(self->irlap, self->daddr, NULL, 0); + break; + case LM_LAP_DISCONNECT_INDICATION: + pr_debug("%s(), Error LM_LAP_DISCONNECT_INDICATION\n", + __func__); + + irlmp_next_lap_state(self, LAP_STANDBY); + break; + default: + pr_debug("%s(), Unknown event %s\n", + __func__, irlmp_event[event]); + break; + } +} + +/* + * Function irlmp_state_u_connect (event, skb, info) + * + * U_CONNECT, The layer above has tried to open an LSAP connection but + * since the IrLAP connection does not exist, we must first start an + * IrLAP connection. We are now waiting response from IrLAP. + * */ +static void irlmp_state_u_connect(struct lap_cb *self, IRLMP_EVENT event, + struct sk_buff *skb) +{ + pr_debug("%s(), event=%s\n", __func__, irlmp_event[event]); + + switch (event) { + case LM_LAP_CONNECT_INDICATION: + /* It's important to switch state first, to avoid IrLMP to + * think that the link is free since IrLMP may then start + * discovery before the connection is properly set up. DB. + */ + irlmp_next_lap_state(self, LAP_ACTIVE); + + /* Just accept connection TODO, this should be fixed */ + irlap_connect_response(self->irlap, skb); + + /* Tell LSAPs that they can start sending data */ + irlmp_do_all_lsap_event(self->lsaps, LM_LAP_CONNECT_CONFIRM); + + /* Note : by the time we get there (LAP retries and co), + * the lsaps may already have gone. This avoid getting stuck + * forever in LAP_ACTIVE state - Jean II */ + if (HASHBIN_GET_SIZE(self->lsaps) == 0) { + pr_debug("%s() NO LSAPs !\n", __func__); + irlmp_start_idle_timer(self, LM_IDLE_TIMEOUT); + } + break; + case LM_LAP_CONNECT_REQUEST: + /* Already trying to connect */ + break; + case LM_LAP_CONNECT_CONFIRM: + /* For all lsap_ce E Associated do LS_Connect_confirm */ + irlmp_next_lap_state(self, LAP_ACTIVE); + + /* Tell LSAPs that they can start sending data */ + irlmp_do_all_lsap_event(self->lsaps, LM_LAP_CONNECT_CONFIRM); + + /* Note : by the time we get there (LAP retries and co), + * the lsaps may already have gone. This avoid getting stuck + * forever in LAP_ACTIVE state - Jean II */ + if (HASHBIN_GET_SIZE(self->lsaps) == 0) { + pr_debug("%s() NO LSAPs !\n", __func__); + irlmp_start_idle_timer(self, LM_IDLE_TIMEOUT); + } + break; + case LM_LAP_DISCONNECT_INDICATION: + pr_debug("%s(), LM_LAP_DISCONNECT_INDICATION\n", __func__); + irlmp_next_lap_state(self, LAP_STANDBY); + + /* Send disconnect event to all LSAPs using this link */ + irlmp_do_all_lsap_event(self->lsaps, + LM_LAP_DISCONNECT_INDICATION); + break; + case LM_LAP_DISCONNECT_REQUEST: + pr_debug("%s(), LM_LAP_DISCONNECT_REQUEST\n", __func__); + + /* One of the LSAP did timeout or was closed, if it was + * the last one, try to get out of here - Jean II */ + if (HASHBIN_GET_SIZE(self->lsaps) <= 1) { + irlap_disconnect_request(self->irlap); + } + break; + default: + pr_debug("%s(), Unknown event %s\n", + __func__, irlmp_event[event]); + break; + } +} + +/* + * Function irlmp_state_active (event, skb, info) + * + * ACTIVE, IrLAP connection is active + * + */ +static void irlmp_state_active(struct lap_cb *self, IRLMP_EVENT event, + struct sk_buff *skb) +{ + switch (event) { + case LM_LAP_CONNECT_REQUEST: + pr_debug("%s(), LS_CONNECT_REQUEST\n", __func__); + + /* + * IrLAP may have a pending disconnect. We tried to close + * IrLAP, but it was postponed because the link was + * busy or we were still sending packets. As we now + * need it, make sure it stays on. Jean II + */ + irlap_clear_disconnect(self->irlap); + + /* + * LAP connection already active, just bounce back! Since we + * don't know which LSAP that tried to do this, we have to + * notify all LSAPs using this LAP, but that should be safe to + * do anyway. + */ + irlmp_do_all_lsap_event(self->lsaps, LM_LAP_CONNECT_CONFIRM); + + /* Needed by connect indication */ + irlmp_do_all_lsap_event(irlmp->unconnected_lsaps, + LM_LAP_CONNECT_CONFIRM); + /* Keep state */ + break; + case LM_LAP_DISCONNECT_REQUEST: + /* + * Need to find out if we should close IrLAP or not. If there + * is only one LSAP connection left on this link, that LSAP + * must be the one that tries to close IrLAP. It will be + * removed later and moved to the list of unconnected LSAPs + */ + if (HASHBIN_GET_SIZE(self->lsaps) > 0) { + /* Timer value is checked in irsysctl - Jean II */ + irlmp_start_idle_timer(self, sysctl_lap_keepalive_time * HZ / 1000); + } else { + /* No more connections, so close IrLAP */ + + /* We don't want to change state just yet, because + * we want to reflect accurately the real state of + * the LAP, not the state we wish it was in, + * so that we don't lose LM_LAP_CONNECT_REQUEST. + * In some cases, IrLAP won't close the LAP + * immediately. For example, it might still be + * retrying packets or waiting for the pf bit. + * As the LAP always send a DISCONNECT_INDICATION + * in PCLOSE or SCLOSE, just change state on that. + * Jean II */ + irlap_disconnect_request(self->irlap); + } + break; + case LM_LAP_IDLE_TIMEOUT: + if (HASHBIN_GET_SIZE(self->lsaps) == 0) { + /* Same reasoning as above - keep state */ + irlap_disconnect_request(self->irlap); + } + break; + case LM_LAP_DISCONNECT_INDICATION: + irlmp_next_lap_state(self, LAP_STANDBY); + + /* In some case, at this point our side has already closed + * all lsaps, and we are waiting for the idle_timer to + * expire. If another device reconnect immediately, the + * idle timer will expire in the midle of the connection + * initialisation, screwing up things a lot... + * Therefore, we must stop the timer... */ + irlmp_stop_idle_timer(self); + + /* + * Inform all connected LSAP's using this link + */ + irlmp_do_all_lsap_event(self->lsaps, + LM_LAP_DISCONNECT_INDICATION); + + /* Force an expiry of the discovery log. + * Now that the LAP is free, the system may attempt to + * connect to another device. Unfortunately, our entries + * are stale. There is a small window (<3s) before the + * normal discovery will run and where irlmp_connect_request() + * can get the wrong info, so make sure things get + * cleaned *NOW* ;-) - Jean II */ + irlmp_do_expiry(); + break; + default: + pr_debug("%s(), Unknown event %s\n", + __func__, irlmp_event[event]); + break; + } +} + +/********************************************************************* + * + * LSAP connection control states + * + ********************************************************************/ + +/* + * Function irlmp_state_disconnected (event, skb, info) + * + * DISCONNECTED + * + */ +static int irlmp_state_disconnected(struct lsap_cb *self, IRLMP_EVENT event, + struct sk_buff *skb) +{ + int ret = 0; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); + + switch (event) { +#ifdef CONFIG_IRDA_ULTRA + case LM_UDATA_INDICATION: + /* This is most bizarre. Those packets are aka unreliable + * connected, aka IrLPT or SOCK_DGRAM/IRDAPROTO_UNITDATA. + * Why do we pass them as Ultra ??? Jean II */ + irlmp_connless_data_indication(self, skb); + break; +#endif /* CONFIG_IRDA_ULTRA */ + case LM_CONNECT_REQUEST: + pr_debug("%s(), LM_CONNECT_REQUEST\n", __func__); + + if (self->conn_skb) { + net_warn_ratelimited("%s: busy with another request!\n", + __func__); + return -EBUSY; + } + /* Don't forget to refcount it (see irlmp_connect_request()) */ + skb_get(skb); + self->conn_skb = skb; + + irlmp_next_lsap_state(self, LSAP_SETUP_PEND); + + /* Start watchdog timer (5 secs for now) */ + irlmp_start_watchdog_timer(self, 5*HZ); + + irlmp_do_lap_event(self->lap, LM_LAP_CONNECT_REQUEST, NULL); + break; + case LM_CONNECT_INDICATION: + if (self->conn_skb) { + net_warn_ratelimited("%s: busy with another request!\n", + __func__); + return -EBUSY; + } + /* Don't forget to refcount it (see irlap_driver_rcv()) */ + skb_get(skb); + self->conn_skb = skb; + + irlmp_next_lsap_state(self, LSAP_CONNECT_PEND); + + /* Start watchdog timer + * This is not mentionned in the spec, but there is a rare + * race condition that can get the socket stuck. + * If we receive this event while our LAP is closing down, + * the LM_LAP_CONNECT_REQUEST get lost and we get stuck in + * CONNECT_PEND state forever. + * The other cause of getting stuck down there is if the + * higher layer never reply to the CONNECT_INDICATION. + * Anyway, it make sense to make sure that we always have + * a backup plan. 1 second is plenty (should be immediate). + * Jean II */ + irlmp_start_watchdog_timer(self, 1*HZ); + + irlmp_do_lap_event(self->lap, LM_LAP_CONNECT_REQUEST, NULL); + break; + default: + pr_debug("%s(), Unknown event %s on LSAP %#02x\n", + __func__, irlmp_event[event], self->slsap_sel); + break; + } + return ret; +} + +/* + * Function irlmp_state_connect (self, event, skb) + * + * CONNECT + * + */ +static int irlmp_state_connect(struct lsap_cb *self, IRLMP_EVENT event, + struct sk_buff *skb) +{ + struct lsap_cb *lsap; + int ret = 0; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); + + switch (event) { + case LM_CONNECT_RESPONSE: + /* + * Bind this LSAP to the IrLAP link where the connect was + * received + */ + lsap = hashbin_remove(irlmp->unconnected_lsaps, (long) self, + NULL); + + IRDA_ASSERT(lsap == self, return -1;); + IRDA_ASSERT(self->lap != NULL, return -1;); + IRDA_ASSERT(self->lap->lsaps != NULL, return -1;); + + hashbin_insert(self->lap->lsaps, (irda_queue_t *) self, + (long) self, NULL); + + set_bit(0, &self->connected); /* TRUE */ + + irlmp_send_lcf_pdu(self->lap, self->dlsap_sel, + self->slsap_sel, CONNECT_CNF, skb); + + del_timer(&self->watchdog_timer); + + irlmp_next_lsap_state(self, LSAP_DATA_TRANSFER_READY); + break; + case LM_WATCHDOG_TIMEOUT: + /* May happen, who knows... + * Jean II */ + pr_debug("%s() WATCHDOG_TIMEOUT!\n", __func__); + + /* Disconnect, get out... - Jean II */ + self->lap = NULL; + self->dlsap_sel = LSAP_ANY; + irlmp_next_lsap_state(self, LSAP_DISCONNECTED); + break; + default: + /* LM_LAP_DISCONNECT_INDICATION : Should never happen, we + * are *not* yet bound to the IrLAP link. Jean II */ + pr_debug("%s(), Unknown event %s on LSAP %#02x\n", + __func__, irlmp_event[event], self->slsap_sel); + break; + } + return ret; +} + +/* + * Function irlmp_state_connect_pend (event, skb, info) + * + * CONNECT_PEND + * + */ +static int irlmp_state_connect_pend(struct lsap_cb *self, IRLMP_EVENT event, + struct sk_buff *skb) +{ + struct sk_buff *tx_skb; + int ret = 0; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); + + switch (event) { + case LM_CONNECT_REQUEST: + /* Keep state */ + break; + case LM_CONNECT_RESPONSE: + pr_debug("%s(), LM_CONNECT_RESPONSE, no indication issued yet\n", + __func__); + /* Keep state */ + break; + case LM_DISCONNECT_REQUEST: + pr_debug("%s(), LM_DISCONNECT_REQUEST, not yet bound to IrLAP connection\n", + __func__); + /* Keep state */ + break; + case LM_LAP_CONNECT_CONFIRM: + pr_debug("%s(), LS_CONNECT_CONFIRM\n", __func__); + irlmp_next_lsap_state(self, LSAP_CONNECT); + + tx_skb = self->conn_skb; + self->conn_skb = NULL; + + irlmp_connect_indication(self, tx_skb); + /* Drop reference count - see irlmp_connect_indication(). */ + dev_kfree_skb(tx_skb); + break; + case LM_WATCHDOG_TIMEOUT: + /* Will happen in some rare cases because of a race condition. + * Just make sure we don't stay there forever... + * Jean II */ + pr_debug("%s() WATCHDOG_TIMEOUT!\n", __func__); + + /* Go back to disconnected mode, keep the socket waiting */ + self->lap = NULL; + self->dlsap_sel = LSAP_ANY; + if(self->conn_skb) + dev_kfree_skb(self->conn_skb); + self->conn_skb = NULL; + irlmp_next_lsap_state(self, LSAP_DISCONNECTED); + break; + default: + /* LM_LAP_DISCONNECT_INDICATION : Should never happen, we + * are *not* yet bound to the IrLAP link. Jean II */ + pr_debug("%s(), Unknown event %s on LSAP %#02x\n", + __func__, irlmp_event[event], self->slsap_sel); + break; + } + return ret; +} + +/* + * Function irlmp_state_dtr (self, event, skb) + * + * DATA_TRANSFER_READY + * + */ +static int irlmp_state_dtr(struct lsap_cb *self, IRLMP_EVENT event, + struct sk_buff *skb) +{ + LM_REASON reason; + int ret = 0; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); + IRDA_ASSERT(self->lap != NULL, return -1;); + + switch (event) { + case LM_DATA_REQUEST: /* Optimize for the common case */ + irlmp_send_data_pdu(self->lap, self->dlsap_sel, + self->slsap_sel, FALSE, skb); + break; + case LM_DATA_INDICATION: /* Optimize for the common case */ + irlmp_data_indication(self, skb); + break; + case LM_UDATA_REQUEST: + IRDA_ASSERT(skb != NULL, return -1;); + irlmp_send_data_pdu(self->lap, self->dlsap_sel, + self->slsap_sel, TRUE, skb); + break; + case LM_UDATA_INDICATION: + irlmp_udata_indication(self, skb); + break; + case LM_CONNECT_REQUEST: + pr_debug("%s(), LM_CONNECT_REQUEST, error, LSAP already connected\n", + __func__); + /* Keep state */ + break; + case LM_CONNECT_RESPONSE: + pr_debug("%s(), LM_CONNECT_RESPONSE, error, LSAP already connected\n", + __func__); + /* Keep state */ + break; + case LM_DISCONNECT_REQUEST: + irlmp_send_lcf_pdu(self->lap, self->dlsap_sel, self->slsap_sel, + DISCONNECT, skb); + irlmp_next_lsap_state(self, LSAP_DISCONNECTED); + /* Called only from irlmp_disconnect_request(), will + * unbind from LAP over there. Jean II */ + + /* Try to close the LAP connection if its still there */ + if (self->lap) { + pr_debug("%s(), trying to close IrLAP\n", + __func__); + irlmp_do_lap_event(self->lap, + LM_LAP_DISCONNECT_REQUEST, + NULL); + } + break; + case LM_LAP_DISCONNECT_INDICATION: + irlmp_next_lsap_state(self, LSAP_DISCONNECTED); + + reason = irlmp_convert_lap_reason(self->lap->reason); + + irlmp_disconnect_indication(self, reason, NULL); + break; + case LM_DISCONNECT_INDICATION: + irlmp_next_lsap_state(self, LSAP_DISCONNECTED); + + IRDA_ASSERT(self->lap != NULL, return -1;); + IRDA_ASSERT(self->lap->magic == LMP_LAP_MAGIC, return -1;); + + IRDA_ASSERT(skb != NULL, return -1;); + IRDA_ASSERT(skb->len > 3, return -1;); + reason = skb->data[3]; + + /* Try to close the LAP connection */ + pr_debug("%s(), trying to close IrLAP\n", __func__); + irlmp_do_lap_event(self->lap, LM_LAP_DISCONNECT_REQUEST, NULL); + + irlmp_disconnect_indication(self, reason, skb); + break; + default: + pr_debug("%s(), Unknown event %s on LSAP %#02x\n", + __func__, irlmp_event[event], self->slsap_sel); + break; + } + return ret; +} + +/* + * Function irlmp_state_setup (event, skb, info) + * + * SETUP, Station Control has set up the underlying IrLAP connection. + * An LSAP connection request has been transmitted to the peer + * LSAP-Connection Control FSM and we are awaiting reply. + */ +static int irlmp_state_setup(struct lsap_cb *self, IRLMP_EVENT event, + struct sk_buff *skb) +{ + LM_REASON reason; + int ret = 0; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LMP_LSAP_MAGIC, return -1;); + + switch (event) { + case LM_CONNECT_CONFIRM: + irlmp_next_lsap_state(self, LSAP_DATA_TRANSFER_READY); + + del_timer(&self->watchdog_timer); + + irlmp_connect_confirm(self, skb); + break; + case LM_DISCONNECT_INDICATION: + irlmp_next_lsap_state(self, LSAP_DISCONNECTED); + + IRDA_ASSERT(self->lap != NULL, return -1;); + IRDA_ASSERT(self->lap->magic == LMP_LAP_MAGIC, return -1;); + + IRDA_ASSERT(skb != NULL, return -1;); + IRDA_ASSERT(skb->len > 3, return -1;); + reason = skb->data[3]; + + /* Try to close the LAP connection */ + pr_debug("%s(), trying to close IrLAP\n", __func__); + irlmp_do_lap_event(self->lap, LM_LAP_DISCONNECT_REQUEST, NULL); + + irlmp_disconnect_indication(self, reason, skb); + break; + case LM_LAP_DISCONNECT_INDICATION: + irlmp_next_lsap_state(self, LSAP_DISCONNECTED); + + del_timer(&self->watchdog_timer); + + IRDA_ASSERT(self->lap != NULL, return -1;); + IRDA_ASSERT(self->lap->magic == LMP_LAP_MAGIC, return -1;); + + reason = irlmp_convert_lap_reason(self->lap->reason); + + irlmp_disconnect_indication(self, reason, skb); + break; + case LM_WATCHDOG_TIMEOUT: + pr_debug("%s() WATCHDOG_TIMEOUT!\n", __func__); + + IRDA_ASSERT(self->lap != NULL, return -1;); + irlmp_do_lap_event(self->lap, LM_LAP_DISCONNECT_REQUEST, NULL); + irlmp_next_lsap_state(self, LSAP_DISCONNECTED); + + irlmp_disconnect_indication(self, LM_CONNECT_FAILURE, NULL); + break; + default: + pr_debug("%s(), Unknown event %s on LSAP %#02x\n", + __func__, irlmp_event[event], self->slsap_sel); + break; + } + return ret; +} + +/* + * Function irlmp_state_setup_pend (event, skb, info) + * + * SETUP_PEND, An LM_CONNECT_REQUEST has been received from the service + * user to set up an LSAP connection. A request has been sent to the + * LAP FSM to set up the underlying IrLAP connection, and we + * are awaiting confirm. + */ +static int irlmp_state_setup_pend(struct lsap_cb *self, IRLMP_EVENT event, + struct sk_buff *skb) +{ + struct sk_buff *tx_skb; + LM_REASON reason; + int ret = 0; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(irlmp != NULL, return -1;); + + switch (event) { + case LM_LAP_CONNECT_CONFIRM: + IRDA_ASSERT(self->conn_skb != NULL, return -1;); + + tx_skb = self->conn_skb; + self->conn_skb = NULL; + + irlmp_send_lcf_pdu(self->lap, self->dlsap_sel, + self->slsap_sel, CONNECT_CMD, tx_skb); + /* Drop reference count - see irlap_data_request(). */ + dev_kfree_skb(tx_skb); + + irlmp_next_lsap_state(self, LSAP_SETUP); + break; + case LM_WATCHDOG_TIMEOUT: + pr_debug("%s() : WATCHDOG_TIMEOUT !\n", __func__); + + IRDA_ASSERT(self->lap != NULL, return -1;); + irlmp_do_lap_event(self->lap, LM_LAP_DISCONNECT_REQUEST, NULL); + irlmp_next_lsap_state(self, LSAP_DISCONNECTED); + + irlmp_disconnect_indication(self, LM_CONNECT_FAILURE, NULL); + break; + case LM_LAP_DISCONNECT_INDICATION: /* LS_Disconnect.indication */ + del_timer( &self->watchdog_timer); + + irlmp_next_lsap_state(self, LSAP_DISCONNECTED); + + reason = irlmp_convert_lap_reason(self->lap->reason); + + irlmp_disconnect_indication(self, reason, NULL); + break; + default: + pr_debug("%s(), Unknown event %s on LSAP %#02x\n", + __func__, irlmp_event[event], self->slsap_sel); + break; + } + return ret; +} diff --git a/kernel/net/irda/irlmp_frame.c b/kernel/net/irda/irlmp_frame.c new file mode 100644 index 000000000..38b0f994b --- /dev/null +++ b/kernel/net/irda/irlmp_frame.c @@ -0,0 +1,476 @@ +/********************************************************************* + * + * Filename: irlmp_frame.c + * Version: 0.9 + * Description: IrLMP frame implementation + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Tue Aug 19 02:09:59 1997 + * Modified at: Mon Dec 13 13:41:12 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1998-1999 Dag Brattli <dagb@cs.uit.no> + * All Rights Reserved. + * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/skbuff.h> +#include <linux/kernel.h> + +#include <net/irda/irda.h> +#include <net/irda/irlap.h> +#include <net/irda/timer.h> +#include <net/irda/irlmp.h> +#include <net/irda/irlmp_frame.h> +#include <net/irda/discovery.h> + +static struct lsap_cb *irlmp_find_lsap(struct lap_cb *self, __u8 dlsap, + __u8 slsap, int status, hashbin_t *); + +inline void irlmp_send_data_pdu(struct lap_cb *self, __u8 dlsap, __u8 slsap, + int expedited, struct sk_buff *skb) +{ + skb->data[0] = dlsap; + skb->data[1] = slsap; + + if (expedited) { + pr_debug("%s(), sending expedited data\n", __func__); + irlap_data_request(self->irlap, skb, TRUE); + } else + irlap_data_request(self->irlap, skb, FALSE); +} + +/* + * Function irlmp_send_lcf_pdu (dlsap, slsap, opcode,skb) + * + * Send Link Control Frame to IrLAP + */ +void irlmp_send_lcf_pdu(struct lap_cb *self, __u8 dlsap, __u8 slsap, + __u8 opcode, struct sk_buff *skb) +{ + __u8 *frame; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;); + IRDA_ASSERT(skb != NULL, return;); + + frame = skb->data; + + frame[0] = dlsap | CONTROL_BIT; + frame[1] = slsap; + + frame[2] = opcode; + + if (opcode == DISCONNECT) + frame[3] = 0x01; /* Service user request */ + else + frame[3] = 0x00; /* rsvd */ + + irlap_data_request(self->irlap, skb, FALSE); +} + +/* + * Function irlmp_input (skb) + * + * Used by IrLAP to pass received data frames to IrLMP layer + * + */ +void irlmp_link_data_indication(struct lap_cb *self, struct sk_buff *skb, + int unreliable) +{ + struct lsap_cb *lsap; + __u8 slsap_sel; /* Source (this) LSAP address */ + __u8 dlsap_sel; /* Destination LSAP address */ + __u8 *fp; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;); + IRDA_ASSERT(skb->len > 2, return;); + + fp = skb->data; + + /* + * The next statements may be confusing, but we do this so that + * destination LSAP of received frame is source LSAP in our view + */ + slsap_sel = fp[0] & LSAP_MASK; + dlsap_sel = fp[1]; + + /* + * Check if this is an incoming connection, since we must deal with + * it in a different way than other established connections. + */ + if ((fp[0] & CONTROL_BIT) && (fp[2] == CONNECT_CMD)) { + pr_debug("%s(), incoming connection, source LSAP=%d, dest LSAP=%d\n", + __func__, slsap_sel, dlsap_sel); + + /* Try to find LSAP among the unconnected LSAPs */ + lsap = irlmp_find_lsap(self, dlsap_sel, slsap_sel, CONNECT_CMD, + irlmp->unconnected_lsaps); + + /* Maybe LSAP was already connected, so try one more time */ + if (!lsap) { + pr_debug("%s(), incoming connection for LSAP already connected\n", + __func__); + lsap = irlmp_find_lsap(self, dlsap_sel, slsap_sel, 0, + self->lsaps); + } + } else + lsap = irlmp_find_lsap(self, dlsap_sel, slsap_sel, 0, + self->lsaps); + + if (lsap == NULL) { + pr_debug("IrLMP, Sorry, no LSAP for received frame!\n"); + pr_debug("%s(), slsap_sel = %02x, dlsap_sel = %02x\n", + __func__, slsap_sel, dlsap_sel); + if (fp[0] & CONTROL_BIT) { + pr_debug("%s(), received control frame %02x\n", + __func__, fp[2]); + } else { + pr_debug("%s(), received data frame\n", __func__); + } + return; + } + + /* + * Check if we received a control frame? + */ + if (fp[0] & CONTROL_BIT) { + switch (fp[2]) { + case CONNECT_CMD: + lsap->lap = self; + irlmp_do_lsap_event(lsap, LM_CONNECT_INDICATION, skb); + break; + case CONNECT_CNF: + irlmp_do_lsap_event(lsap, LM_CONNECT_CONFIRM, skb); + break; + case DISCONNECT: + pr_debug("%s(), Disconnect indication!\n", + __func__); + irlmp_do_lsap_event(lsap, LM_DISCONNECT_INDICATION, + skb); + break; + case ACCESSMODE_CMD: + pr_debug("Access mode cmd not implemented!\n"); + break; + case ACCESSMODE_CNF: + pr_debug("Access mode cnf not implemented!\n"); + break; + default: + pr_debug("%s(), Unknown control frame %02x\n", + __func__, fp[2]); + break; + } + } else if (unreliable) { + /* Optimize and bypass the state machine if possible */ + if (lsap->lsap_state == LSAP_DATA_TRANSFER_READY) + irlmp_udata_indication(lsap, skb); + else + irlmp_do_lsap_event(lsap, LM_UDATA_INDICATION, skb); + } else { + /* Optimize and bypass the state machine if possible */ + if (lsap->lsap_state == LSAP_DATA_TRANSFER_READY) + irlmp_data_indication(lsap, skb); + else + irlmp_do_lsap_event(lsap, LM_DATA_INDICATION, skb); + } +} + +/* + * Function irlmp_link_unitdata_indication (self, skb) + * + * + * + */ +#ifdef CONFIG_IRDA_ULTRA +void irlmp_link_unitdata_indication(struct lap_cb *self, struct sk_buff *skb) +{ + struct lsap_cb *lsap; + __u8 slsap_sel; /* Source (this) LSAP address */ + __u8 dlsap_sel; /* Destination LSAP address */ + __u8 pid; /* Protocol identifier */ + __u8 *fp; + unsigned long flags; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;); + IRDA_ASSERT(skb->len > 2, return;); + + fp = skb->data; + + /* + * The next statements may be confusing, but we do this so that + * destination LSAP of received frame is source LSAP in our view + */ + slsap_sel = fp[0] & LSAP_MASK; + dlsap_sel = fp[1]; + pid = fp[2]; + + if (pid & 0x80) { + pr_debug("%s(), extension in PID not supp!\n", + __func__); + return; + } + + /* Check if frame is addressed to the connectionless LSAP */ + if ((slsap_sel != LSAP_CONNLESS) || (dlsap_sel != LSAP_CONNLESS)) { + pr_debug("%s(), dropping frame!\n", __func__); + return; + } + + /* Search the connectionless LSAP */ + spin_lock_irqsave(&irlmp->unconnected_lsaps->hb_spinlock, flags); + lsap = (struct lsap_cb *) hashbin_get_first(irlmp->unconnected_lsaps); + while (lsap != NULL) { + /* + * Check if source LSAP and dest LSAP selectors and PID match. + */ + if ((lsap->slsap_sel == slsap_sel) && + (lsap->dlsap_sel == dlsap_sel) && + (lsap->pid == pid)) + { + break; + } + lsap = (struct lsap_cb *) hashbin_get_next(irlmp->unconnected_lsaps); + } + spin_unlock_irqrestore(&irlmp->unconnected_lsaps->hb_spinlock, flags); + + if (lsap) + irlmp_connless_data_indication(lsap, skb); + else { + pr_debug("%s(), found no matching LSAP!\n", __func__); + } +} +#endif /* CONFIG_IRDA_ULTRA */ + +/* + * Function irlmp_link_disconnect_indication (reason, userdata) + * + * IrLAP has disconnected + * + */ +void irlmp_link_disconnect_indication(struct lap_cb *lap, + struct irlap_cb *irlap, + LAP_REASON reason, + struct sk_buff *skb) +{ + IRDA_ASSERT(lap != NULL, return;); + IRDA_ASSERT(lap->magic == LMP_LAP_MAGIC, return;); + + lap->reason = reason; + lap->daddr = DEV_ADDR_ANY; + + /* FIXME: must do something with the skb if any */ + + /* + * Inform station state machine + */ + irlmp_do_lap_event(lap, LM_LAP_DISCONNECT_INDICATION, NULL); +} + +/* + * Function irlmp_link_connect_indication (qos) + * + * Incoming LAP connection! + * + */ +void irlmp_link_connect_indication(struct lap_cb *self, __u32 saddr, + __u32 daddr, struct qos_info *qos, + struct sk_buff *skb) +{ + /* Copy QoS settings for this session */ + self->qos = qos; + + /* Update destination device address */ + self->daddr = daddr; + IRDA_ASSERT(self->saddr == saddr, return;); + + irlmp_do_lap_event(self, LM_LAP_CONNECT_INDICATION, skb); +} + +/* + * Function irlmp_link_connect_confirm (qos) + * + * LAP connection confirmed! + * + */ +void irlmp_link_connect_confirm(struct lap_cb *self, struct qos_info *qos, + struct sk_buff *skb) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;); + IRDA_ASSERT(qos != NULL, return;); + + /* Don't need use the skb for now */ + + /* Copy QoS settings for this session */ + self->qos = qos; + + irlmp_do_lap_event(self, LM_LAP_CONNECT_CONFIRM, NULL); +} + +/* + * Function irlmp_link_discovery_indication (self, log) + * + * Device is discovering us + * + * It's not an answer to our own discoveries, just another device trying + * to perform discovery, but we don't want to miss the opportunity + * to exploit this information, because : + * o We may not actively perform discovery (just passive discovery) + * o This type of discovery is much more reliable. In some cases, it + * seem that less than 50% of our discoveries get an answer, while + * we always get ~100% of these. + * o Make faster discovery, statistically divide time of discovery + * events by 2 (important for the latency aspect and user feel) + * o Even is we do active discovery, the other node might not + * answer our discoveries (ex: Palm). The Palm will just perform + * one active discovery and connect directly to us. + * + * However, when both devices discover each other, they might attempt to + * connect to each other following the discovery event, and it would create + * collisions on the medium (SNRM battle). + * The "fix" for that is to disable all connection requests in IrLAP + * for 100ms after a discovery indication by setting the media_busy flag. + * Previously, we used to postpone the event which was quite ugly. Now + * that IrLAP takes care of this problem, just pass the event up... + * + * Jean II + */ +void irlmp_link_discovery_indication(struct lap_cb *self, + discovery_t *discovery) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;); + + /* Add to main log, cleanup */ + irlmp_add_discovery(irlmp->cachelog, discovery); + + /* Just handle it the same way as a discovery confirm, + * bypass the LM_LAP state machine (see below) */ + irlmp_discovery_confirm(irlmp->cachelog, DISCOVERY_PASSIVE); +} + +/* + * Function irlmp_link_discovery_confirm (self, log) + * + * Called by IrLAP with a list of discoveries after the discovery + * request has been carried out. A NULL log is received if IrLAP + * was unable to carry out the discovery request + * + */ +void irlmp_link_discovery_confirm(struct lap_cb *self, hashbin_t *log) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LMP_LAP_MAGIC, return;); + + /* Add to main log, cleanup */ + irlmp_add_discovery_log(irlmp->cachelog, log); + + /* Propagate event to various LSAPs registered for it. + * We bypass the LM_LAP state machine because + * 1) We do it regardless of the LM_LAP state + * 2) It doesn't affect the LM_LAP state + * 3) Faster, slimer, simpler, ... + * Jean II */ + irlmp_discovery_confirm(irlmp->cachelog, DISCOVERY_ACTIVE); +} + +#ifdef CONFIG_IRDA_CACHE_LAST_LSAP +static inline void irlmp_update_cache(struct lap_cb *lap, + struct lsap_cb *lsap) +{ + /* Prevent concurrent read to get garbage */ + lap->cache.valid = FALSE; + /* Update cache entry */ + lap->cache.dlsap_sel = lsap->dlsap_sel; + lap->cache.slsap_sel = lsap->slsap_sel; + lap->cache.lsap = lsap; + lap->cache.valid = TRUE; +} +#endif + +/* + * Function irlmp_find_handle (self, dlsap_sel, slsap_sel, status, queue) + * + * Find handle associated with destination and source LSAP + * + * Any IrDA connection (LSAP/TSAP) is uniquely identified by + * 3 parameters, the local lsap, the remote lsap and the remote address. + * We may initiate multiple connections to the same remote service + * (they will have different local lsap), a remote device may initiate + * multiple connections to the same local service (they will have + * different remote lsap), or multiple devices may connect to the same + * service and may use the same remote lsap (and they will have + * different remote address). + * So, where is the remote address ? Each LAP connection is made with + * a single remote device, so imply a specific remote address. + * Jean II + */ +static struct lsap_cb *irlmp_find_lsap(struct lap_cb *self, __u8 dlsap_sel, + __u8 slsap_sel, int status, + hashbin_t *queue) +{ + struct lsap_cb *lsap; + unsigned long flags; + + /* + * Optimize for the common case. We assume that the last frame + * received is in the same connection as the last one, so check in + * cache first to avoid the linear search + */ +#ifdef CONFIG_IRDA_CACHE_LAST_LSAP + if ((self->cache.valid) && + (self->cache.slsap_sel == slsap_sel) && + (self->cache.dlsap_sel == dlsap_sel)) + { + return self->cache.lsap; + } +#endif + + spin_lock_irqsave(&queue->hb_spinlock, flags); + + lsap = (struct lsap_cb *) hashbin_get_first(queue); + while (lsap != NULL) { + /* + * If this is an incoming connection, then the destination + * LSAP selector may have been specified as LM_ANY so that + * any client can connect. In that case we only need to check + * if the source LSAP (in our view!) match! + */ + if ((status == CONNECT_CMD) && + (lsap->slsap_sel == slsap_sel) && + (lsap->dlsap_sel == LSAP_ANY)) { + /* This is where the dest lsap sel is set on incoming + * lsaps */ + lsap->dlsap_sel = dlsap_sel; + break; + } + /* + * Check if source LSAP and dest LSAP selectors match. + */ + if ((lsap->slsap_sel == slsap_sel) && + (lsap->dlsap_sel == dlsap_sel)) + break; + + lsap = (struct lsap_cb *) hashbin_get_next(queue); + } +#ifdef CONFIG_IRDA_CACHE_LAST_LSAP + if(lsap) + irlmp_update_cache(self, lsap); +#endif + spin_unlock_irqrestore(&queue->hb_spinlock, flags); + + /* Return what we've found or NULL */ + return lsap; +} diff --git a/kernel/net/irda/irmod.c b/kernel/net/irda/irmod.c new file mode 100644 index 000000000..c5e35b85c --- /dev/null +++ b/kernel/net/irda/irmod.c @@ -0,0 +1,199 @@ +/********************************************************************* + * + * Filename: irmod.c + * Version: 0.9 + * Description: IrDA stack main entry points + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Mon Dec 15 13:55:39 1997 + * Modified at: Wed Jan 5 15:12:41 2000 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1997, 1999-2000 Dag Brattli, All Rights Reserved. + * Copyright (c) 2000-2004 Jean Tourrilhes <jt@hpl.hp.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +/* + * This file contains the main entry points of the IrDA stack. + * They are in this file and not af_irda.c because some developpers + * are using the IrDA stack without the socket API (compiling out + * af_irda.c). + * Jean II + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> + +#include <net/irda/irda.h> +#include <net/irda/irmod.h> /* notify_t */ +#include <net/irda/irlap.h> /* irlap_init */ +#include <net/irda/irlmp.h> /* irlmp_init */ +#include <net/irda/iriap.h> /* iriap_init */ +#include <net/irda/irttp.h> /* irttp_init */ +#include <net/irda/irda_device.h> /* irda_device_init */ + +/* Packet type handler. + * Tell the kernel how IrDA packets should be handled. + */ +static struct packet_type irda_packet_type __read_mostly = { + .type = cpu_to_be16(ETH_P_IRDA), + .func = irlap_driver_rcv, /* Packet type handler irlap_frame.c */ +}; + +/* + * Function irda_notify_init (notify) + * + * Used for initializing the notify structure + * + */ +void irda_notify_init(notify_t *notify) +{ + notify->data_indication = NULL; + notify->udata_indication = NULL; + notify->connect_confirm = NULL; + notify->connect_indication = NULL; + notify->disconnect_indication = NULL; + notify->flow_indication = NULL; + notify->status_indication = NULL; + notify->instance = NULL; + strlcpy(notify->name, "Unknown", sizeof(notify->name)); +} +EXPORT_SYMBOL(irda_notify_init); + +/* + * Function irda_init (void) + * + * Protocol stack initialisation entry point. + * Initialise the various components of the IrDA stack + */ +static int __init irda_init(void) +{ + int ret = 0; + + /* Lower layer of the stack */ + irlmp_init(); + irlap_init(); + + /* Driver/dongle support */ + irda_device_init(); + + /* Higher layers of the stack */ + iriap_init(); + irttp_init(); + ret = irsock_init(); + if (ret < 0) + goto out_err_1; + + /* Add IrDA packet type (Start receiving packets) */ + dev_add_pack(&irda_packet_type); + + /* External APIs */ +#ifdef CONFIG_PROC_FS + irda_proc_register(); +#endif +#ifdef CONFIG_SYSCTL + ret = irda_sysctl_register(); + if (ret < 0) + goto out_err_2; +#endif + + ret = irda_nl_register(); + if (ret < 0) + goto out_err_3; + + return 0; + + out_err_3: +#ifdef CONFIG_SYSCTL + irda_sysctl_unregister(); + out_err_2: +#endif +#ifdef CONFIG_PROC_FS + irda_proc_unregister(); +#endif + + /* Remove IrDA packet type (stop receiving packets) */ + dev_remove_pack(&irda_packet_type); + + /* Remove higher layers */ + irsock_cleanup(); + out_err_1: + irttp_cleanup(); + iriap_cleanup(); + + /* Remove lower layers */ + irda_device_cleanup(); + irlap_cleanup(); /* Must be done before irlmp_cleanup()! DB */ + + /* Remove middle layer */ + irlmp_cleanup(); + + + return ret; +} + +/* + * Function irda_cleanup (void) + * + * Protocol stack cleanup/removal entry point. + * Cleanup the various components of the IrDA stack + */ +static void __exit irda_cleanup(void) +{ + /* Remove External APIs */ + irda_nl_unregister(); + +#ifdef CONFIG_SYSCTL + irda_sysctl_unregister(); +#endif +#ifdef CONFIG_PROC_FS + irda_proc_unregister(); +#endif + + /* Remove IrDA packet type (stop receiving packets) */ + dev_remove_pack(&irda_packet_type); + + /* Remove higher layers */ + irsock_cleanup(); + irttp_cleanup(); + iriap_cleanup(); + + /* Remove lower layers */ + irda_device_cleanup(); + irlap_cleanup(); /* Must be done before irlmp_cleanup()! DB */ + + /* Remove middle layer */ + irlmp_cleanup(); +} + +/* + * The IrDA stack must be initialised *before* drivers get initialised, + * and *before* higher protocols (IrLAN/IrCOMM/IrNET) get initialised, + * otherwise bad things will happen (hashbins will be NULL for example). + * Those modules are at module_init()/device_initcall() level. + * + * On the other hand, it needs to be initialised *after* the basic + * networking, the /proc/net filesystem and sysctl module. Those are + * currently initialised in .../init/main.c (before initcalls). + * Also, IrDA drivers needs to be initialised *after* the random number + * generator (main stack and higher layer init don't need it anymore). + * + * Jean II + */ +subsys_initcall(irda_init); +module_exit(irda_cleanup); + +MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no> & Jean Tourrilhes <jt@hpl.hp.com>"); +MODULE_DESCRIPTION("The Linux IrDA Protocol Stack"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_NETPROTO(PF_IRDA); diff --git a/kernel/net/irda/irnet/Kconfig b/kernel/net/irda/irnet/Kconfig new file mode 100644 index 000000000..28c557f0f --- /dev/null +++ b/kernel/net/irda/irnet/Kconfig @@ -0,0 +1,13 @@ +config IRNET + tristate "IrNET protocol" + depends on IRDA && PPP + help + Say Y here if you want to build support for the IrNET protocol. + To compile it as a module, choose M here: the module will be + called irnet. IrNET is a PPP driver, so you will also need a + working PPP subsystem (driver, daemon and config)... + + IrNET is an alternate way to transfer TCP/IP traffic over IrDA. It + uses synchronous PPP over a set of point to point IrDA sockets. You + can use it between Linux machine or with W2k. + diff --git a/kernel/net/irda/irnet/Makefile b/kernel/net/irda/irnet/Makefile new file mode 100644 index 000000000..61c365c8a --- /dev/null +++ b/kernel/net/irda/irnet/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the Linux IrDA IrNET protocol layer. +# + +obj-$(CONFIG_IRNET) += irnet.o + +irnet-y := irnet_ppp.o irnet_irda.o diff --git a/kernel/net/irda/irnet/irnet.h b/kernel/net/irda/irnet/irnet.h new file mode 100644 index 000000000..8d65bb947 --- /dev/null +++ b/kernel/net/irda/irnet/irnet.h @@ -0,0 +1,523 @@ +/* + * IrNET protocol module : Synchronous PPP over an IrDA socket. + * + * Jean II - HPL `00 - <jt@hpl.hp.com> + * + * This file contains definitions and declarations global to the IrNET module, + * all grouped in one place... + * This file is a *private* header, so other modules don't want to know + * what's in there... + * + * Note : as most part of the Linux kernel, this module is available + * under the GNU General Public License (GPL). + */ + +#ifndef IRNET_H +#define IRNET_H + +/************************** DOCUMENTATION ***************************/ +/* + * What is IrNET + * ------------- + * IrNET is a protocol allowing to carry TCP/IP traffic between two + * IrDA peers in an efficient fashion. It is a thin layer, passing PPP + * packets to IrTTP and vice versa. It uses PPP in synchronous mode, + * because IrTTP offer a reliable sequenced packet service (as opposed + * to a byte stream). In fact, you could see IrNET as carrying TCP/IP + * in a IrDA socket, using PPP to provide the glue. + * + * The main difference with traditional PPP over IrCOMM is that we + * avoid the framing and serial emulation which are a performance + * bottleneck. It also allows multipoint communications in a sensible + * fashion. + * + * The main difference with IrLAN is that we use PPP for the link + * management, which is more standard, interoperable and flexible than + * the IrLAN protocol. For example, PPP adds authentication, + * encryption, compression, header compression and automated routing + * setup. And, as IrNET let PPP do the hard work, the implementation + * is much simpler than IrLAN. + * + * The Linux implementation + * ------------------------ + * IrNET is written on top of the Linux-IrDA stack, and interface with + * the generic Linux PPP driver. Because IrNET depend on recent + * changes of the PPP driver interface, IrNET will work only with very + * recent kernel (2.3.99-pre6 and up). + * + * The present implementation offer the following features : + * o simple user interface using pppd + * o efficient implementation (interface directly to PPP and IrTTP) + * o addressing (you can specify the name of the IrNET recipient) + * o multipoint operation (limited by IrLAP specification) + * o information in /proc/net/irda/irnet + * o IrNET events on /dev/irnet (for user space daemon) + * o IrNET daemon (irnetd) to automatically handle incoming requests + * o Windows 2000 compatibility (tested, but need more work) + * Currently missing : + * o Lot's of testing (that's your job) + * o Connection retries (may be too hard to do) + * o Check pppd persist mode + * o User space daemon (to automatically handle incoming requests) + * + * The setup is not currently the most easy, but this should get much + * better when everything will get integrated... + * + * Acknowledgements + * ---------------- + * This module is based on : + * o The PPP driver (ppp_synctty/ppp_generic) by Paul Mackerras + * o The IrLAN protocol (irlan_common/XXX) by Dag Brattli + * o The IrSock interface (af_irda) by Dag Brattli + * o Some other bits from the kernel and my drivers... + * Infinite thanks to those brave souls for providing the infrastructure + * upon which IrNET is built. + * + * Thanks to all my colleagues in HP for helping me. In particular, + * thanks to Salil Pradhan and Bill Serra for W2k testing... + * Thanks to Luiz Magalhaes for irnetd and much testing... + * + * Thanks to Alan Cox for answering lot's of my stupid questions, and + * to Paul Mackerras answering my questions on how to best integrate + * IrNET and pppd. + * + * Jean II + * + * Note on some implementations choices... + * ------------------------------------ + * 1) Direct interface vs tty/socket + * I could have used a tty interface to hook to ppp and use the full + * socket API to connect to IrDA. The code would have been easier to + * maintain, and maybe the code would have been smaller... + * Instead, we hook directly to ppp_generic and to IrTTP, which make + * things more complicated... + * + * The first reason is flexibility : this allow us to create IrNET + * instances on demand (no /dev/ircommX crap) and to allow linkname + * specification on pppd command line... + * + * Second reason is speed optimisation. If you look closely at the + * transmit and receive paths, you will notice that they are "super lean" + * (that's why they look ugly), with no function calls and as little data + * copy and modification as I could... + * + * 2) irnetd in user space + * irnetd is implemented in user space, which is necessary to call pppd. + * This also give maximum benefits in term of flexibility and customability, + * and allow to offer the event channel, useful for other stuff like debug. + * + * On the other hand, this require a loose coordination between the + * present module and irnetd. One critical area is how incoming request + * are handled. + * When irnet receive an incoming request, it send an event to irnetd and + * drop the incoming IrNET socket. + * irnetd start a pppd instance, which create a new IrNET socket. This new + * socket is then connected in the originating node to the pppd instance. + * At this point, in the originating node, the first socket is closed. + * + * I admit, this is a bit messy and waste some resources. The alternative + * is caching incoming socket, and that's also quite messy and waste + * resources. + * We also make connection time slower. For example, on a 115 kb/s link it + * adds 60ms to the connection time (770 ms). However, this is slower than + * the time it takes to fire up pppd on my P133... + * + * + * History : + * ------- + * + * v1 - 15.5.00 - Jean II + * o Basic IrNET (hook to ppp_generic & IrTTP - incl. multipoint) + * o control channel on /dev/irnet (set name/address) + * o event channel on /dev/irnet (for user space daemon) + * + * v2 - 5.6.00 - Jean II + * o Enable DROP_NOT_READY to avoid PPP timeouts & other weirdness... + * o Add DISCONNECT_TO event and rename DISCONNECT_FROM. + * o Set official device number alloaction on /dev/irnet + * + * v3 - 30.8.00 - Jean II + * o Update to latest Linux-IrDA changes : + * - queue_t => irda_queue_t + * o Update to ppp-2.4.0 : + * - move irda_irnet_connect from PPPIOCATTACH to TIOCSETD + * o Add EXPIRE event (depend on new IrDA-Linux patch) + * o Switch from `hashbin_remove' to `hashbin_remove_this' to fix + * a multilink bug... (depend on new IrDA-Linux patch) + * o fix a self->daddr to self->raddr in irda_irnet_connect to fix + * another multilink bug (darn !) + * o Remove LINKNAME_IOCTL cruft + * + * v3b - 31.8.00 - Jean II + * o Dump discovery log at event channel startup + * + * v4 - 28.9.00 - Jean II + * o Fix interaction between poll/select and dump discovery log + * o Add IRNET_BLOCKED_LINK event (depend on new IrDA-Linux patch) + * o Add IRNET_NOANSWER_FROM event (mostly to help support) + * o Release flow control in disconnect_indication + * o Block packets while connecting (speed up connections) + * + * v5 - 11.01.01 - Jean II + * o Init self->max_header_size, just in case... + * o Set up ap->chan.hdrlen, to get zero copy on tx side working. + * o avoid tx->ttp->flow->ppp->tx->... loop, by checking flow state + * Thanks to Christian Gennerat for finding this bug ! + * --- + * o Declare the proper MTU/MRU that we can support + * (but PPP doesn't read the MTU value :-() + * o Declare hashbin HB_NOLOCK instead of HB_LOCAL to avoid + * disabling and enabling irq twice + * + * v6 - 31.05.01 - Jean II + * o Print source address in Found, Discovery, Expiry & Request events + * o Print requested source address in /proc/net/irnet + * o Change control channel input. Allow multiple commands in one line. + * o Add saddr command to change ap->rsaddr (and use that in IrDA) + * --- + * o Make the IrDA connection procedure totally asynchronous. + * Heavy rewrite of the IAS query code and the whole connection + * procedure. Now, irnet_connect() no longer need to be called from + * a process context... + * o Enable IrDA connect retries in ppp_irnet_send(). The good thing + * is that IrDA connect retries are directly driven by PPP LCP + * retries (we retry for each LCP packet), so that everything + * is transparently controlled from pppd lcp-max-configure. + * o Add ttp_connect flag to prevent rentry on the connect procedure + * o Test and fixups to eliminate side effects of retries + * + * v7 - 22.08.01 - Jean II + * o Cleanup : Change "saddr = 0x0" to "saddr = DEV_ADDR_ANY" + * o Fix bug in BLOCK_WHEN_CONNECT introduced in v6 : due to the + * asynchronous IAS query, self->tsap is NULL when PPP send the + * first packet. This was preventing "connect-delay 0" to work. + * Change the test in ppp_irnet_send() to self->ttp_connect. + * + * v8 - 1.11.01 - Jean II + * o Tighten the use of self->ttp_connect and self->ttp_open to + * prevent various race conditions. + * o Avoid leaking discovery log and skb + * o Replace "self" with "server" in irnet_connect_indication() to + * better detect cut'n'paste error ;-) + * + * v9 - 29.11.01 - Jean II + * o Fix event generation in disconnect indication that I broke in v8 + * It was always generation "No-Answer" because I was testing ttp_open + * just after clearing it. *blush*. + * o Use newly created irttp_listen() to fix potential crash when LAP + * destroyed before irnet module removed. + * + * v10 - 4.3.2 - Jean II + * o When receiving a disconnect indication, don't reenable the + * PPP Tx queue, this will trigger a reconnect. Instead, close + * the channel, which will kill pppd... + * + * v11 - 20.3.02 - Jean II + * o Oops ! v10 fix disabled IrNET retries and passive behaviour. + * Better fix in irnet_disconnect_indication() : + * - if connected, kill pppd via hangup. + * - if not connected, reenable ppp Tx, which trigger IrNET retry. + * + * v12 - 10.4.02 - Jean II + * o Fix race condition in irnet_connect_indication(). + * If the socket was already trying to connect, drop old connection + * and use new one only if acting as primary. See comments. + * + * v13 - 30.5.02 - Jean II + * o Update module init code + * + * v14 - 20.2.03 - Jean II + * o Add discovery hint bits in the control channel. + * o Remove obsolete MOD_INC/DEC_USE_COUNT in favor of .owner + * + * v15 - 7.4.03 - Jean II + * o Replace spin_lock_irqsave() with spin_lock_bh() so that we can + * use ppp_unit_number(). It's probably also better overall... + * o Disable call to ppp_unregister_channel(), because we can't do it. + */ + +/***************************** INCLUDES *****************************/ + +#include <linux/module.h> + +#include <linux/kernel.h> +#include <linux/skbuff.h> +#include <linux/tty.h> +#include <linux/proc_fs.h> +#include <linux/netdevice.h> +#include <linux/miscdevice.h> +#include <linux/poll.h> +#include <linux/capability.h> +#include <linux/ctype.h> /* isspace() */ +#include <linux/string.h> /* skip_spaces() */ +#include <asm/uaccess.h> +#include <linux/init.h> + +#include <linux/ppp_defs.h> +#include <linux/ppp-ioctl.h> +#include <linux/ppp_channel.h> + +#include <net/irda/irda.h> +#include <net/irda/iriap.h> +#include <net/irda/irias_object.h> +#include <net/irda/irlmp.h> +#include <net/irda/irttp.h> +#include <net/irda/discovery.h> + +/***************************** OPTIONS *****************************/ +/* + * Define or undefine to compile or not some optional part of the + * IrNET driver... + * Note : the present defaults make sense, play with that at your + * own risk... + */ +/* IrDA side of the business... */ +#define DISCOVERY_NOMASK /* To enable W2k compatibility... */ +#define ADVERTISE_HINT /* Advertise IrLAN hint bit */ +#define ALLOW_SIMULT_CONNECT /* This seem to work, cross fingers... */ +#define DISCOVERY_EVENTS /* Query the discovery log to post events */ +#define INITIAL_DISCOVERY /* Dump current discovery log as events */ +#undef STREAM_COMPAT /* Not needed - potentially messy */ +#undef CONNECT_INDIC_KICK /* Might mess IrDA, not needed */ +#undef FAIL_SEND_DISCONNECT /* Might mess IrDA, not needed */ +#undef PASS_CONNECT_PACKETS /* Not needed ? Safe */ +#undef MISSING_PPP_API /* Stuff I wish I could do */ + +/* PPP side of the business */ +#define BLOCK_WHEN_CONNECT /* Block packets when connecting */ +#define CONNECT_IN_SEND /* Retry IrDA connection procedure */ +#undef FLUSH_TO_PPP /* Not sure about this one, let's play safe */ +#undef SECURE_DEVIRNET /* Bah... */ + +/****************************** DEBUG ******************************/ + +/* + * This set of flags enable and disable all the various warning, + * error and debug message of this driver. + * Each section can be enabled and disabled independently + */ +/* In the PPP part */ +#define DEBUG_CTRL_TRACE 0 /* Control channel */ +#define DEBUG_CTRL_INFO 0 /* various info */ +#define DEBUG_CTRL_ERROR 1 /* problems */ +#define DEBUG_FS_TRACE 0 /* filesystem callbacks */ +#define DEBUG_FS_INFO 0 /* various info */ +#define DEBUG_FS_ERROR 1 /* problems */ +#define DEBUG_PPP_TRACE 0 /* PPP related functions */ +#define DEBUG_PPP_INFO 0 /* various info */ +#define DEBUG_PPP_ERROR 1 /* problems */ +#define DEBUG_MODULE_TRACE 0 /* module insertion/removal */ +#define DEBUG_MODULE_ERROR 1 /* problems */ + +/* In the IrDA part */ +#define DEBUG_IRDA_SR_TRACE 0 /* IRDA subroutines */ +#define DEBUG_IRDA_SR_INFO 0 /* various info */ +#define DEBUG_IRDA_SR_ERROR 1 /* problems */ +#define DEBUG_IRDA_SOCK_TRACE 0 /* IRDA main socket functions */ +#define DEBUG_IRDA_SOCK_INFO 0 /* various info */ +#define DEBUG_IRDA_SOCK_ERROR 1 /* problems */ +#define DEBUG_IRDA_SERV_TRACE 0 /* The IrNET server */ +#define DEBUG_IRDA_SERV_INFO 0 /* various info */ +#define DEBUG_IRDA_SERV_ERROR 1 /* problems */ +#define DEBUG_IRDA_TCB_TRACE 0 /* IRDA IrTTP callbacks */ +#define DEBUG_IRDA_CB_INFO 0 /* various info */ +#define DEBUG_IRDA_CB_ERROR 1 /* problems */ +#define DEBUG_IRDA_OCB_TRACE 0 /* IRDA other callbacks */ +#define DEBUG_IRDA_OCB_INFO 0 /* various info */ +#define DEBUG_IRDA_OCB_ERROR 1 /* problems */ + +#define DEBUG_ASSERT 0 /* Verify all assertions */ + +/* + * These are the macros we are using to actually print the debug + * statements. Don't look at it, it's ugly... + * + * One of the trick is that, as the DEBUG_XXX are constant, the + * compiler will optimise away the if() in all cases. + */ +/* All error messages (will show up in the normal logs) */ +#define DERROR(dbg, format, args...) \ + {if(DEBUG_##dbg) \ + printk(KERN_INFO "irnet: %s(): " format, __func__ , ##args);} + +/* Normal debug message (will show up in /var/log/debug) */ +#define DEBUG(dbg, format, args...) \ + {if(DEBUG_##dbg) \ + printk(KERN_DEBUG "irnet: %s(): " format, __func__ , ##args);} + +/* Entering a function (trace) */ +#define DENTER(dbg, format, args...) \ + {if(DEBUG_##dbg) \ + printk(KERN_DEBUG "irnet: -> %s" format, __func__ , ##args);} + +/* Entering and exiting a function in one go (trace) */ +#define DPASS(dbg, format, args...) \ + {if(DEBUG_##dbg) \ + printk(KERN_DEBUG "irnet: <>%s" format, __func__ , ##args);} + +/* Exiting a function (trace) */ +#define DEXIT(dbg, format, args...) \ + {if(DEBUG_##dbg) \ + printk(KERN_DEBUG "irnet: <-%s()" format, __func__ , ##args);} + +/* Exit a function with debug */ +#define DRETURN(ret, dbg, args...) \ + {DEXIT(dbg, ": " args);\ + return ret; } + +/* Exit a function on failed condition */ +#define DABORT(cond, ret, dbg, args...) \ + {if(cond) {\ + DERROR(dbg, args);\ + return ret; }} + +/* Invalid assertion, print out an error and exit... */ +#define DASSERT(cond, ret, dbg, args...) \ + {if((DEBUG_ASSERT) && !(cond)) {\ + DERROR(dbg, "Invalid assertion: " args);\ + return ret; }} + +/************************ CONSTANTS & MACROS ************************/ + +/* Paranoia */ +#define IRNET_MAGIC 0xB00754 + +/* Number of control events in the control channel buffer... */ +#define IRNET_MAX_EVENTS 8 /* Should be more than enough... */ + +/****************************** TYPES ******************************/ + +/* + * This is the main structure where we store all the data pertaining to + * one instance of irnet. + * Note : in irnet functions, a pointer this structure is usually called + * "ap" or "self". If the code is borrowed from the IrDA stack, it tend + * to be called "self", and if it is borrowed from the PPP driver it is + * "ap". Apart from that, it's exactly the same structure ;-) + */ +typedef struct irnet_socket +{ + /* ------------------- Instance management ------------------- */ + /* We manage a linked list of IrNET socket instances */ + irda_queue_t q; /* Must be first - for hasbin */ + int magic; /* Paranoia */ + + /* --------------------- FileSystem part --------------------- */ + /* "pppd" interact directly with us on a /dev/ file */ + struct file * file; /* File descriptor of this instance */ + /* TTY stuff - to keep "pppd" happy */ + struct ktermios termios; /* Various tty flags */ + /* Stuff for the control channel */ + int event_index; /* Last read in the event log */ + + /* ------------------------- PPP part ------------------------- */ + /* We interface directly to the ppp_generic driver in the kernel */ + int ppp_open; /* registered with ppp_generic */ + struct ppp_channel chan; /* Interface to generic ppp layer */ + + int mru; /* Max size of PPP payload */ + u32 xaccm[8]; /* Asynchronous character map (just */ + u32 raccm; /* to please pppd - dummy) */ + unsigned int flags; /* PPP flags (compression, ...) */ + unsigned int rbits; /* Unused receive flags ??? */ + struct work_struct disconnect_work; /* Process context disconnection */ + /* ------------------------ IrTTP part ------------------------ */ + /* We create a pseudo "socket" over the IrDA tranport */ + unsigned long ttp_open; /* Set when IrTTP is ready */ + unsigned long ttp_connect; /* Set when IrTTP is connecting */ + struct tsap_cb * tsap; /* IrTTP instance (the connection) */ + + char rname[NICKNAME_MAX_LEN + 1]; + /* IrDA nickname of destination */ + __u32 rdaddr; /* Requested peer IrDA address */ + __u32 rsaddr; /* Requested local IrDA address */ + __u32 daddr; /* actual peer IrDA address */ + __u32 saddr; /* my local IrDA address */ + __u8 dtsap_sel; /* Remote TSAP selector */ + __u8 stsap_sel; /* Local TSAP selector */ + + __u32 max_sdu_size_rx;/* Socket parameters used for IrTTP */ + __u32 max_sdu_size_tx; + __u32 max_data_size; + __u8 max_header_size; + LOCAL_FLOW tx_flow; /* State of the Tx path in IrTTP */ + + /* ------------------- IrLMP and IrIAS part ------------------- */ + /* Used for IrDA Discovery and socket name resolution */ + void * ckey; /* IrLMP client handle */ + __u16 mask; /* Hint bits mask (filter discov.)*/ + int nslots; /* Number of slots for discovery */ + + struct iriap_cb * iriap; /* Used to query remote IAS */ + int errno; /* status of the IAS query */ + + /* -------------------- Discovery log part -------------------- */ + /* Used by initial discovery on the control channel + * and by irnet_discover_daddr_and_lsap_sel() */ + struct irda_device_info *discoveries; /* Copy of the discovery log */ + int disco_index; /* Last read in the discovery log */ + int disco_number; /* Size of the discovery log */ + + struct mutex lock; + +} irnet_socket; + +/* + * This is the various event that we will generate on the control channel + */ +typedef enum irnet_event +{ + IRNET_DISCOVER, /* New IrNET node discovered */ + IRNET_EXPIRE, /* IrNET node expired */ + IRNET_CONNECT_TO, /* IrNET socket has connected to other node */ + IRNET_CONNECT_FROM, /* Other node has connected to IrNET socket */ + IRNET_REQUEST_FROM, /* Non satisfied connection request */ + IRNET_NOANSWER_FROM, /* Failed connection request */ + IRNET_BLOCKED_LINK, /* Link (IrLAP) is blocked for > 3s */ + IRNET_DISCONNECT_FROM, /* IrNET socket has disconnected */ + IRNET_DISCONNECT_TO /* Closing IrNET socket */ +} irnet_event; + +/* + * This is the storage for an event and its arguments + */ +typedef struct irnet_log +{ + irnet_event event; + int unit; + __u32 saddr; + __u32 daddr; + char name[NICKNAME_MAX_LEN + 1]; /* 21 + 1 */ + __u16_host_order hints; /* Discovery hint bits */ +} irnet_log; + +/* + * This is the storage for all events and related stuff... + */ +typedef struct irnet_ctrl_channel +{ + irnet_log log[IRNET_MAX_EVENTS]; /* Event log */ + int index; /* Current index in log */ + spinlock_t spinlock; /* Serialize access to the event log */ + wait_queue_head_t rwait; /* processes blocked on read (or poll) */ +} irnet_ctrl_channel; + +/**************************** PROTOTYPES ****************************/ +/* + * Global functions of the IrNET module + * Note : we list here also functions called from one file to the other. + */ + +/* -------------------------- IRDA PART -------------------------- */ +int irda_irnet_create(irnet_socket *); /* Initialise an IrNET socket */ +int irda_irnet_connect(irnet_socket *); /* Try to connect over IrDA */ +void irda_irnet_destroy(irnet_socket *); /* Teardown an IrNET socket */ +int irda_irnet_init(void); /* Initialise IrDA part of IrNET */ +void irda_irnet_cleanup(void); /* Teardown IrDA part of IrNET */ + +/**************************** VARIABLES ****************************/ + +/* Control channel stuff - allocated in irnet_irda.h */ +extern struct irnet_ctrl_channel irnet_events; + +#endif /* IRNET_H */ diff --git a/kernel/net/irda/irnet/irnet_irda.c b/kernel/net/irda/irnet/irnet_irda.c new file mode 100644 index 000000000..7f17a8020 --- /dev/null +++ b/kernel/net/irda/irnet/irnet_irda.c @@ -0,0 +1,1885 @@ +/* + * IrNET protocol module : Synchronous PPP over an IrDA socket. + * + * Jean II - HPL `00 - <jt@hpl.hp.com> + * + * This file implement the IRDA interface of IrNET. + * Basically, we sit on top of IrTTP. We set up IrTTP, IrIAS properly, + * and exchange frames with IrTTP. + */ + +#include "irnet_irda.h" /* Private header */ +#include <linux/sched.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <asm/unaligned.h> + +/* + * PPP disconnect work: we need to make sure we're in + * process context when calling ppp_unregister_channel(). + */ +static void irnet_ppp_disconnect(struct work_struct *work) +{ + irnet_socket * self = + container_of(work, irnet_socket, disconnect_work); + + if (self == NULL) + return; + /* + * If we were connected, cleanup & close the PPP + * channel, which will kill pppd (hangup) and the rest. + */ + if (self->ppp_open && !self->ttp_open && !self->ttp_connect) { + ppp_unregister_channel(&self->chan); + self->ppp_open = 0; + } +} + +/************************* CONTROL CHANNEL *************************/ +/* + * When ppp is not active, /dev/irnet act as a control channel. + * Writing allow to set up the IrDA destination of the IrNET channel, + * and any application may be read events happening on IrNET... + */ + +/*------------------------------------------------------------------*/ +/* + * Post an event to the control channel... + * Put the event in the log, and then wait all process blocked on read + * so they can read the log... + */ +static void +irnet_post_event(irnet_socket * ap, + irnet_event event, + __u32 saddr, + __u32 daddr, + char * name, + __u16 hints) +{ + int index; /* In the log */ + + DENTER(CTRL_TRACE, "(ap=0x%p, event=%d, daddr=%08x, name=``%s'')\n", + ap, event, daddr, name); + + /* Protect this section via spinlock. + * Note : as we are the only event producer, we only need to exclude + * ourself when touching the log, which is nice and easy. + */ + spin_lock_bh(&irnet_events.spinlock); + + /* Copy the event in the log */ + index = irnet_events.index; + irnet_events.log[index].event = event; + irnet_events.log[index].daddr = daddr; + irnet_events.log[index].saddr = saddr; + /* Try to copy IrDA nickname */ + if(name) + strcpy(irnet_events.log[index].name, name); + else + irnet_events.log[index].name[0] = '\0'; + /* Copy hints */ + irnet_events.log[index].hints.word = hints; + /* Try to get ppp unit number */ + if((ap != (irnet_socket *) NULL) && (ap->ppp_open)) + irnet_events.log[index].unit = ppp_unit_number(&ap->chan); + else + irnet_events.log[index].unit = -1; + + /* Increment the index + * Note that we increment the index only after the event is written, + * to make sure that the readers don't get garbage... */ + irnet_events.index = (index + 1) % IRNET_MAX_EVENTS; + + DEBUG(CTRL_INFO, "New event index is %d\n", irnet_events.index); + + /* Spin lock end */ + spin_unlock_bh(&irnet_events.spinlock); + + /* Now : wake up everybody waiting for events... */ + wake_up_interruptible_all(&irnet_events.rwait); + + DEXIT(CTRL_TRACE, "\n"); +} + +/************************* IRDA SUBROUTINES *************************/ +/* + * These are a bunch of subroutines called from other functions + * down there, mostly common code or to improve readability... + * + * Note : we duplicate quite heavily some routines of af_irda.c, + * because our input structure (self) is quite different + * (struct irnet instead of struct irda_sock), which make sharing + * the same code impossible (at least, without templates). + */ + +/*------------------------------------------------------------------*/ +/* + * Function irda_open_tsap (self) + * + * Open local Transport Service Access Point (TSAP) + * + * Create a IrTTP instance for us and set all the IrTTP callbacks. + */ +static inline int +irnet_open_tsap(irnet_socket * self) +{ + notify_t notify; /* Callback structure */ + + DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self); + + DABORT(self->tsap != NULL, -EBUSY, IRDA_SR_ERROR, "Already busy !\n"); + + /* Initialize IrTTP callbacks to be used by the IrDA stack */ + irda_notify_init(¬ify); + notify.connect_confirm = irnet_connect_confirm; + notify.connect_indication = irnet_connect_indication; + notify.disconnect_indication = irnet_disconnect_indication; + notify.data_indication = irnet_data_indication; + /*notify.udata_indication = NULL;*/ + notify.flow_indication = irnet_flow_indication; + notify.status_indication = irnet_status_indication; + notify.instance = self; + strlcpy(notify.name, IRNET_NOTIFY_NAME, sizeof(notify.name)); + + /* Open an IrTTP instance */ + self->tsap = irttp_open_tsap(LSAP_ANY, DEFAULT_INITIAL_CREDIT, + ¬ify); + DABORT(self->tsap == NULL, -ENOMEM, + IRDA_SR_ERROR, "Unable to allocate TSAP !\n"); + + /* Remember which TSAP selector we actually got */ + self->stsap_sel = self->tsap->stsap_sel; + + DEXIT(IRDA_SR_TRACE, " - tsap=0x%p, sel=0x%X\n", + self->tsap, self->stsap_sel); + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Function irnet_ias_to_tsap (self, result, value) + * + * Examine an IAS object and extract TSAP + * + * We do an IAP query to find the TSAP associated with the IrNET service. + * When IrIAP pass us the result of the query, this function look at + * the return values to check for failures and extract the TSAP if + * possible. + * Also deallocate value + * The failure is in self->errno + * Return TSAP or -1 + */ +static inline __u8 +irnet_ias_to_tsap(irnet_socket * self, + int result, + struct ias_value * value) +{ + __u8 dtsap_sel = 0; /* TSAP we are looking for */ + + DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self); + + /* By default, no error */ + self->errno = 0; + + /* Check if request succeeded */ + switch(result) + { + /* Standard errors : service not available */ + case IAS_CLASS_UNKNOWN: + case IAS_ATTRIB_UNKNOWN: + DEBUG(IRDA_SR_INFO, "IAS object doesn't exist ! (%d)\n", result); + self->errno = -EADDRNOTAVAIL; + break; + + /* Other errors, most likely IrDA stack failure */ + default : + DEBUG(IRDA_SR_INFO, "IAS query failed ! (%d)\n", result); + self->errno = -EHOSTUNREACH; + break; + + /* Success : we got what we wanted */ + case IAS_SUCCESS: + break; + } + + /* Check what was returned to us */ + if(value != NULL) + { + /* What type of argument have we got ? */ + switch(value->type) + { + case IAS_INTEGER: + DEBUG(IRDA_SR_INFO, "result=%d\n", value->t.integer); + if(value->t.integer != -1) + /* Get the remote TSAP selector */ + dtsap_sel = value->t.integer; + else + self->errno = -EADDRNOTAVAIL; + break; + default: + self->errno = -EADDRNOTAVAIL; + DERROR(IRDA_SR_ERROR, "bad type ! (0x%X)\n", value->type); + break; + } + + /* Cleanup */ + irias_delete_value(value); + } + else /* value == NULL */ + { + /* Nothing returned to us - usually result != SUCCESS */ + if(!(self->errno)) + { + DERROR(IRDA_SR_ERROR, + "IrDA bug : result == SUCCESS && value == NULL\n"); + self->errno = -EHOSTUNREACH; + } + } + DEXIT(IRDA_SR_TRACE, "\n"); + + /* Return the TSAP */ + return dtsap_sel; +} + +/*------------------------------------------------------------------*/ +/* + * Function irnet_find_lsap_sel (self) + * + * Try to lookup LSAP selector in remote LM-IAS + * + * Basically, we start a IAP query, and then go to sleep. When the query + * return, irnet_getvalue_confirm will wake us up, and we can examine the + * result of the query... + * Note that in some case, the query fail even before we go to sleep, + * creating some races... + */ +static inline int +irnet_find_lsap_sel(irnet_socket * self) +{ + DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self); + + /* This should not happen */ + DABORT(self->iriap, -EBUSY, IRDA_SR_ERROR, "busy with a previous query.\n"); + + /* Create an IAP instance, will be closed in irnet_getvalue_confirm() */ + self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self, + irnet_getvalue_confirm); + + /* Treat unexpected signals as disconnect */ + self->errno = -EHOSTUNREACH; + + /* Query remote LM-IAS */ + iriap_getvaluebyclass_request(self->iriap, self->rsaddr, self->daddr, + IRNET_SERVICE_NAME, IRNET_IAS_VALUE); + + /* The above request is non-blocking. + * After a while, IrDA will call us back in irnet_getvalue_confirm() + * We will then call irnet_ias_to_tsap() and finish the + * connection procedure */ + + DEXIT(IRDA_SR_TRACE, "\n"); + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Function irnet_connect_tsap (self) + * + * Initialise the TTP socket and initiate TTP connection + * + */ +static inline int +irnet_connect_tsap(irnet_socket * self) +{ + int err; + + DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self); + + /* Open a local TSAP (an IrTTP instance) */ + err = irnet_open_tsap(self); + if(err != 0) + { + clear_bit(0, &self->ttp_connect); + DERROR(IRDA_SR_ERROR, "connect aborted!\n"); + return err; + } + + /* Connect to remote device */ + err = irttp_connect_request(self->tsap, self->dtsap_sel, + self->rsaddr, self->daddr, NULL, + self->max_sdu_size_rx, NULL); + if(err != 0) + { + clear_bit(0, &self->ttp_connect); + DERROR(IRDA_SR_ERROR, "connect aborted!\n"); + return err; + } + + /* The above call is non-blocking. + * After a while, the IrDA stack will either call us back in + * irnet_connect_confirm() or irnet_disconnect_indication() + * See you there ;-) */ + + DEXIT(IRDA_SR_TRACE, "\n"); + return err; +} + +/*------------------------------------------------------------------*/ +/* + * Function irnet_discover_next_daddr (self) + * + * Query the IrNET TSAP of the next device in the log. + * + * Used in the TSAP discovery procedure. + */ +static inline int +irnet_discover_next_daddr(irnet_socket * self) +{ + /* Close the last instance of IrIAP, and open a new one. + * We can't reuse the IrIAP instance in the IrIAP callback */ + if(self->iriap) + { + iriap_close(self->iriap); + self->iriap = NULL; + } + /* Create a new IAP instance */ + self->iriap = iriap_open(LSAP_ANY, IAS_CLIENT, self, + irnet_discovervalue_confirm); + if(self->iriap == NULL) + return -ENOMEM; + + /* Next discovery - before the call to avoid races */ + self->disco_index++; + + /* Check if we have one more address to try */ + if(self->disco_index < self->disco_number) + { + /* Query remote LM-IAS */ + iriap_getvaluebyclass_request(self->iriap, + self->discoveries[self->disco_index].saddr, + self->discoveries[self->disco_index].daddr, + IRNET_SERVICE_NAME, IRNET_IAS_VALUE); + /* The above request is non-blocking. + * After a while, IrDA will call us back in irnet_discovervalue_confirm() + * We will then call irnet_ias_to_tsap() and come back here again... */ + return 0; + } + else + return 1; +} + +/*------------------------------------------------------------------*/ +/* + * Function irnet_discover_daddr_and_lsap_sel (self) + * + * This try to find a device with the requested service. + * + * Initiate a TSAP discovery procedure. + * It basically look into the discovery log. For each address in the list, + * it queries the LM-IAS of the device to find if this device offer + * the requested service. + * If there is more than one node supporting the service, we complain + * to the user (it should move devices around). + * If we find one node which have the requested TSAP, we connect to it. + * + * This function just start the whole procedure. It request the discovery + * log and submit the first IAS query. + * The bulk of the job is handled in irnet_discovervalue_confirm() + * + * Note : this procedure fails if there is more than one device in range + * on the same dongle, because IrLMP doesn't disconnect the LAP when the + * last LSAP is closed. Moreover, we would need to wait the LAP + * disconnection... + */ +static inline int +irnet_discover_daddr_and_lsap_sel(irnet_socket * self) +{ + int ret; + + DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self); + + /* Ask lmp for the current discovery log */ + self->discoveries = irlmp_get_discoveries(&self->disco_number, self->mask, + DISCOVERY_DEFAULT_SLOTS); + + /* Check if the we got some results */ + if(self->discoveries == NULL) + { + self->disco_number = -1; + clear_bit(0, &self->ttp_connect); + DRETURN(-ENETUNREACH, IRDA_SR_INFO, "No Cachelog...\n"); + } + DEBUG(IRDA_SR_INFO, "Got the log (0x%p), size is %d\n", + self->discoveries, self->disco_number); + + /* Start with the first discovery */ + self->disco_index = -1; + self->daddr = DEV_ADDR_ANY; + + /* This will fail if the log is empty - this is non-blocking */ + ret = irnet_discover_next_daddr(self); + if(ret) + { + /* Close IAP */ + if(self->iriap) + iriap_close(self->iriap); + self->iriap = NULL; + + /* Cleanup our copy of the discovery log */ + kfree(self->discoveries); + self->discoveries = NULL; + + clear_bit(0, &self->ttp_connect); + DRETURN(-ENETUNREACH, IRDA_SR_INFO, "Cachelog empty...\n"); + } + + /* Follow me in irnet_discovervalue_confirm() */ + + DEXIT(IRDA_SR_TRACE, "\n"); + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Function irnet_dname_to_daddr (self) + * + * Convert an IrDA nickname to a valid IrDA address + * + * It basically look into the discovery log until there is a match. + */ +static inline int +irnet_dname_to_daddr(irnet_socket * self) +{ + struct irda_device_info *discoveries; /* Copy of the discovery log */ + int number; /* Number of nodes in the log */ + int i; + + DENTER(IRDA_SR_TRACE, "(self=0x%p)\n", self); + + /* Ask lmp for the current discovery log */ + discoveries = irlmp_get_discoveries(&number, 0xffff, + DISCOVERY_DEFAULT_SLOTS); + /* Check if the we got some results */ + if(discoveries == NULL) + DRETURN(-ENETUNREACH, IRDA_SR_INFO, "Cachelog empty...\n"); + + /* + * Now, check all discovered devices (if any), and connect + * client only about the services that the client is + * interested in... + */ + for(i = 0; i < number; i++) + { + /* Does the name match ? */ + if(!strncmp(discoveries[i].info, self->rname, NICKNAME_MAX_LEN)) + { + /* Yes !!! Get it.. */ + self->daddr = discoveries[i].daddr; + DEBUG(IRDA_SR_INFO, "discovered device ``%s'' at address 0x%08x.\n", + self->rname, self->daddr); + kfree(discoveries); + DEXIT(IRDA_SR_TRACE, "\n"); + return 0; + } + } + /* No luck ! */ + DEBUG(IRDA_SR_INFO, "cannot discover device ``%s'' !!!\n", self->rname); + kfree(discoveries); + return -EADDRNOTAVAIL; +} + + +/************************* SOCKET ROUTINES *************************/ +/* + * This are the main operations on IrNET sockets, basically to create + * and destroy IrNET sockets. These are called from the PPP part... + */ + +/*------------------------------------------------------------------*/ +/* + * Create a IrNET instance : just initialise some parameters... + */ +int +irda_irnet_create(irnet_socket * self) +{ + DENTER(IRDA_SOCK_TRACE, "(self=0x%p)\n", self); + + self->magic = IRNET_MAGIC; /* Paranoia */ + + self->ttp_open = 0; /* Prevent higher layer from accessing IrTTP */ + self->ttp_connect = 0; /* Not connecting yet */ + self->rname[0] = '\0'; /* May be set via control channel */ + self->rdaddr = DEV_ADDR_ANY; /* May be set via control channel */ + self->rsaddr = DEV_ADDR_ANY; /* May be set via control channel */ + self->daddr = DEV_ADDR_ANY; /* Until we get connected */ + self->saddr = DEV_ADDR_ANY; /* Until we get connected */ + self->max_sdu_size_rx = TTP_SAR_UNBOUND; + + /* Register as a client with IrLMP */ + self->ckey = irlmp_register_client(0, NULL, NULL, NULL); +#ifdef DISCOVERY_NOMASK + self->mask = 0xffff; /* For W2k compatibility */ +#else /* DISCOVERY_NOMASK */ + self->mask = irlmp_service_to_hint(S_LAN); +#endif /* DISCOVERY_NOMASK */ + self->tx_flow = FLOW_START; /* Flow control from IrTTP */ + + INIT_WORK(&self->disconnect_work, irnet_ppp_disconnect); + + DEXIT(IRDA_SOCK_TRACE, "\n"); + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Connect to the other side : + * o convert device name to an address + * o find the socket number (dlsap) + * o Establish the connection + * + * Note : We no longer mimic af_irda. The IAS query for finding the TSAP + * is done asynchronously, like the TTP connection. This allow us to + * call this function from any context (not only process). + * The downside is that following what's happening in there is tricky + * because it involve various functions all over the place... + */ +int +irda_irnet_connect(irnet_socket * self) +{ + int err; + + DENTER(IRDA_SOCK_TRACE, "(self=0x%p)\n", self); + + /* Check if we are already trying to connect. + * Because irda_irnet_connect() can be called directly by pppd plus + * packet retries in ppp_generic and connect may take time, plus we may + * race with irnet_connect_indication(), we need to be careful there... */ + if(test_and_set_bit(0, &self->ttp_connect)) + DRETURN(-EBUSY, IRDA_SOCK_INFO, "Already connecting...\n"); + if((self->iriap != NULL) || (self->tsap != NULL)) + DERROR(IRDA_SOCK_ERROR, "Socket not cleaned up...\n"); + + /* Insert ourselves in the hashbin so that the IrNET server can find us. + * Notes : 4th arg is string of 32 char max and must be null terminated + * When 4th arg is used (string), 3rd arg isn't (int) + * Can't re-insert (MUST remove first) so check for that... */ + if((irnet_server.running) && (self->q.q_next == NULL)) + { + spin_lock_bh(&irnet_server.spinlock); + hashbin_insert(irnet_server.list, (irda_queue_t *) self, 0, self->rname); + spin_unlock_bh(&irnet_server.spinlock); + DEBUG(IRDA_SOCK_INFO, "Inserted ``%s'' in hashbin...\n", self->rname); + } + + /* If we don't have anything (no address, no name) */ + if((self->rdaddr == DEV_ADDR_ANY) && (self->rname[0] == '\0')) + { + /* Try to find a suitable address */ + if((err = irnet_discover_daddr_and_lsap_sel(self)) != 0) + DRETURN(err, IRDA_SOCK_INFO, "auto-connect failed!\n"); + /* In most cases, the call above is non-blocking */ + } + else + { + /* If we have only the name (no address), try to get an address */ + if(self->rdaddr == DEV_ADDR_ANY) + { + if((err = irnet_dname_to_daddr(self)) != 0) + DRETURN(err, IRDA_SOCK_INFO, "name connect failed!\n"); + } + else + /* Use the requested destination address */ + self->daddr = self->rdaddr; + + /* Query remote LM-IAS to find LSAP selector */ + irnet_find_lsap_sel(self); + /* The above call is non blocking */ + } + + /* At this point, we are waiting for the IrDA stack to call us back, + * or we have already failed. + * We will finish the connection procedure in irnet_connect_tsap(). + */ + DEXIT(IRDA_SOCK_TRACE, "\n"); + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Function irda_irnet_destroy(self) + * + * Destroy irnet instance + * + * Note : this need to be called from a process context. + */ +void +irda_irnet_destroy(irnet_socket * self) +{ + DENTER(IRDA_SOCK_TRACE, "(self=0x%p)\n", self); + if(self == NULL) + return; + + /* Remove ourselves from hashbin (if we are queued in hashbin) + * Note : `irnet_server.running' protect us from calls in hashbin_delete() */ + if((irnet_server.running) && (self->q.q_next != NULL)) + { + struct irnet_socket * entry; + DEBUG(IRDA_SOCK_INFO, "Removing from hash..\n"); + spin_lock_bh(&irnet_server.spinlock); + entry = hashbin_remove_this(irnet_server.list, (irda_queue_t *) self); + self->q.q_next = NULL; + spin_unlock_bh(&irnet_server.spinlock); + DASSERT(entry == self, , IRDA_SOCK_ERROR, "Can't remove from hash.\n"); + } + + /* If we were connected, post a message */ + if(test_bit(0, &self->ttp_open)) + { + /* Note : as the disconnect comes from ppp_generic, the unit number + * doesn't exist anymore when we post the event, so we need to pass + * NULL as the first arg... */ + irnet_post_event(NULL, IRNET_DISCONNECT_TO, + self->saddr, self->daddr, self->rname, 0); + } + + /* Prevent various IrDA callbacks from messing up things + * Need to be first */ + clear_bit(0, &self->ttp_connect); + + /* Prevent higher layer from accessing IrTTP */ + clear_bit(0, &self->ttp_open); + + /* Unregister with IrLMP */ + irlmp_unregister_client(self->ckey); + + /* Unregister with LM-IAS */ + if(self->iriap) + { + iriap_close(self->iriap); + self->iriap = NULL; + } + + /* Cleanup eventual discoveries from connection attempt or control channel */ + if(self->discoveries != NULL) + { + /* Cleanup our copy of the discovery log */ + kfree(self->discoveries); + self->discoveries = NULL; + } + + /* Close our IrTTP connection */ + if(self->tsap) + { + DEBUG(IRDA_SOCK_INFO, "Closing our TTP connection.\n"); + irttp_disconnect_request(self->tsap, NULL, P_NORMAL); + irttp_close_tsap(self->tsap); + self->tsap = NULL; + } + self->stsap_sel = 0; + + DEXIT(IRDA_SOCK_TRACE, "\n"); +} + + +/************************** SERVER SOCKET **************************/ +/* + * The IrNET service is composed of one server socket and a variable + * number of regular IrNET sockets. The server socket is supposed to + * handle incoming connections and redirect them to one IrNET sockets. + * It's a superset of the regular IrNET socket, but has a very distinct + * behaviour... + */ + +/*------------------------------------------------------------------*/ +/* + * Function irnet_daddr_to_dname (self) + * + * Convert an IrDA address to a IrDA nickname + * + * It basically look into the discovery log until there is a match. + */ +static inline int +irnet_daddr_to_dname(irnet_socket * self) +{ + struct irda_device_info *discoveries; /* Copy of the discovery log */ + int number; /* Number of nodes in the log */ + int i; + + DENTER(IRDA_SERV_TRACE, "(self=0x%p)\n", self); + + /* Ask lmp for the current discovery log */ + discoveries = irlmp_get_discoveries(&number, 0xffff, + DISCOVERY_DEFAULT_SLOTS); + /* Check if the we got some results */ + if (discoveries == NULL) + DRETURN(-ENETUNREACH, IRDA_SERV_INFO, "Cachelog empty...\n"); + + /* Now, check all discovered devices (if any) */ + for(i = 0; i < number; i++) + { + /* Does the name match ? */ + if(discoveries[i].daddr == self->daddr) + { + /* Yes !!! Get it.. */ + strlcpy(self->rname, discoveries[i].info, sizeof(self->rname)); + self->rname[sizeof(self->rname) - 1] = '\0'; + DEBUG(IRDA_SERV_INFO, "Device 0x%08x is in fact ``%s''.\n", + self->daddr, self->rname); + kfree(discoveries); + DEXIT(IRDA_SERV_TRACE, "\n"); + return 0; + } + } + /* No luck ! */ + DEXIT(IRDA_SERV_INFO, ": cannot discover device 0x%08x !!!\n", self->daddr); + kfree(discoveries); + return -EADDRNOTAVAIL; +} + +/*------------------------------------------------------------------*/ +/* + * Function irda_find_socket (self) + * + * Find the correct IrNET socket + * + * Look into the list of IrNET sockets and finds one with the right + * properties... + */ +static inline irnet_socket * +irnet_find_socket(irnet_socket * self) +{ + irnet_socket * new = (irnet_socket *) NULL; + int err; + + DENTER(IRDA_SERV_TRACE, "(self=0x%p)\n", self); + + /* Get the addresses of the requester */ + self->daddr = irttp_get_daddr(self->tsap); + self->saddr = irttp_get_saddr(self->tsap); + + /* Try to get the IrDA nickname of the requester */ + err = irnet_daddr_to_dname(self); + + /* Protect access to the instance list */ + spin_lock_bh(&irnet_server.spinlock); + + /* So now, try to get an socket having specifically + * requested that nickname */ + if(err == 0) + { + new = (irnet_socket *) hashbin_find(irnet_server.list, + 0, self->rname); + if(new) + DEBUG(IRDA_SERV_INFO, "Socket 0x%p matches rname ``%s''.\n", + new, new->rname); + } + + /* If no name matches, try to find an socket by the destination address */ + /* It can be either the requested destination address (set via the + * control channel), or the current destination address if the + * socket is in the middle of a connection request */ + if(new == (irnet_socket *) NULL) + { + new = (irnet_socket *) hashbin_get_first(irnet_server.list); + while(new !=(irnet_socket *) NULL) + { + /* Does it have the same address ? */ + if((new->rdaddr == self->daddr) || (new->daddr == self->daddr)) + { + /* Yes !!! Get it.. */ + DEBUG(IRDA_SERV_INFO, "Socket 0x%p matches daddr %#08x.\n", + new, self->daddr); + break; + } + new = (irnet_socket *) hashbin_get_next(irnet_server.list); + } + } + + /* If we don't have any socket, get the first unconnected socket */ + if(new == (irnet_socket *) NULL) + { + new = (irnet_socket *) hashbin_get_first(irnet_server.list); + while(new !=(irnet_socket *) NULL) + { + /* Is it available ? */ + if(!(test_bit(0, &new->ttp_open)) && (new->rdaddr == DEV_ADDR_ANY) && + (new->rname[0] == '\0') && (new->ppp_open)) + { + /* Yes !!! Get it.. */ + DEBUG(IRDA_SERV_INFO, "Socket 0x%p is free.\n", + new); + break; + } + new = (irnet_socket *) hashbin_get_next(irnet_server.list); + } + } + + /* Spin lock end */ + spin_unlock_bh(&irnet_server.spinlock); + + DEXIT(IRDA_SERV_TRACE, " - new = 0x%p\n", new); + return new; +} + +/*------------------------------------------------------------------*/ +/* + * Function irda_connect_socket (self) + * + * Connect an incoming connection to the socket + * + */ +static inline int +irnet_connect_socket(irnet_socket * server, + irnet_socket * new, + struct qos_info * qos, + __u32 max_sdu_size, + __u8 max_header_size) +{ + DENTER(IRDA_SERV_TRACE, "(server=0x%p, new=0x%p)\n", + server, new); + + /* Now attach up the new socket */ + new->tsap = irttp_dup(server->tsap, new); + DABORT(new->tsap == NULL, -1, IRDA_SERV_ERROR, "dup failed!\n"); + + /* Set up all the relevant parameters on the new socket */ + new->stsap_sel = new->tsap->stsap_sel; + new->dtsap_sel = new->tsap->dtsap_sel; + new->saddr = irttp_get_saddr(new->tsap); + new->daddr = irttp_get_daddr(new->tsap); + + new->max_header_size = max_header_size; + new->max_sdu_size_tx = max_sdu_size; + new->max_data_size = max_sdu_size; +#ifdef STREAM_COMPAT + /* If we want to receive "stream sockets" */ + if(max_sdu_size == 0) + new->max_data_size = irttp_get_max_seg_size(new->tsap); +#endif /* STREAM_COMPAT */ + + /* Clean up the original one to keep it in listen state */ + irttp_listen(server->tsap); + + /* Send a connection response on the new socket */ + irttp_connect_response(new->tsap, new->max_sdu_size_rx, NULL); + + /* Allow PPP to send its junk over the new socket... */ + set_bit(0, &new->ttp_open); + + /* Not connecting anymore, and clean up last possible remains + * of connection attempts on the socket */ + clear_bit(0, &new->ttp_connect); + if(new->iriap) + { + iriap_close(new->iriap); + new->iriap = NULL; + } + if(new->discoveries != NULL) + { + kfree(new->discoveries); + new->discoveries = NULL; + } + +#ifdef CONNECT_INDIC_KICK + /* As currently we don't block packets in ppp_irnet_send() while passive, + * this is not really needed... + * Also, not doing it give IrDA a chance to finish the setup properly + * before being swamped with packets... */ + ppp_output_wakeup(&new->chan); +#endif /* CONNECT_INDIC_KICK */ + + /* Notify the control channel */ + irnet_post_event(new, IRNET_CONNECT_FROM, + new->saddr, new->daddr, server->rname, 0); + + DEXIT(IRDA_SERV_TRACE, "\n"); + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Function irda_disconnect_server (self) + * + * Cleanup the server socket when the incoming connection abort + * + */ +static inline void +irnet_disconnect_server(irnet_socket * self, + struct sk_buff *skb) +{ + DENTER(IRDA_SERV_TRACE, "(self=0x%p)\n", self); + + /* Put the received packet in the black hole */ + kfree_skb(skb); + +#ifdef FAIL_SEND_DISCONNECT + /* Tell the other party we don't want to be connected */ + /* Hum... Is it the right thing to do ? And do we need to send + * a connect response before ? It looks ok without this... */ + irttp_disconnect_request(self->tsap, NULL, P_NORMAL); +#endif /* FAIL_SEND_DISCONNECT */ + + /* Notify the control channel (see irnet_find_socket()) */ + irnet_post_event(NULL, IRNET_REQUEST_FROM, + self->saddr, self->daddr, self->rname, 0); + + /* Clean up the server to keep it in listen state */ + irttp_listen(self->tsap); + + DEXIT(IRDA_SERV_TRACE, "\n"); +} + +/*------------------------------------------------------------------*/ +/* + * Function irda_setup_server (self) + * + * Create a IrTTP server and set it up... + * + * Register the IrLAN hint bit, create a IrTTP instance for us, + * set all the IrTTP callbacks and create an IrIAS entry... + */ +static inline int +irnet_setup_server(void) +{ + __u16 hints; + + DENTER(IRDA_SERV_TRACE, "()\n"); + + /* Initialise the regular socket part of the server */ + irda_irnet_create(&irnet_server.s); + + /* Open a local TSAP (an IrTTP instance) for the server */ + irnet_open_tsap(&irnet_server.s); + + /* PPP part setup */ + irnet_server.s.ppp_open = 0; + irnet_server.s.chan.private = NULL; + irnet_server.s.file = NULL; + + /* Get the hint bit corresponding to IrLAN */ + /* Note : we overload the IrLAN hint bit. As it is only a "hint", and as + * we provide roughly the same functionality as IrLAN, this is ok. + * In fact, the situation is similar as JetSend overloading the Obex hint + */ + hints = irlmp_service_to_hint(S_LAN); + +#ifdef ADVERTISE_HINT + /* Register with IrLMP as a service (advertise our hint bit) */ + irnet_server.skey = irlmp_register_service(hints); +#endif /* ADVERTISE_HINT */ + + /* Register with LM-IAS (so that people can connect to us) */ + irnet_server.ias_obj = irias_new_object(IRNET_SERVICE_NAME, jiffies); + irias_add_integer_attrib(irnet_server.ias_obj, IRNET_IAS_VALUE, + irnet_server.s.stsap_sel, IAS_KERNEL_ATTR); + irias_insert_object(irnet_server.ias_obj); + +#ifdef DISCOVERY_EVENTS + /* Tell IrLMP we want to be notified of newly discovered nodes */ + irlmp_update_client(irnet_server.s.ckey, hints, + irnet_discovery_indication, irnet_expiry_indication, + (void *) &irnet_server.s); +#endif + + DEXIT(IRDA_SERV_TRACE, " - self=0x%p\n", &irnet_server.s); + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Function irda_destroy_server (self) + * + * Destroy the IrTTP server... + * + * Reverse of the previous function... + */ +static inline void +irnet_destroy_server(void) +{ + DENTER(IRDA_SERV_TRACE, "()\n"); + +#ifdef ADVERTISE_HINT + /* Unregister with IrLMP */ + irlmp_unregister_service(irnet_server.skey); +#endif /* ADVERTISE_HINT */ + + /* Unregister with LM-IAS */ + if(irnet_server.ias_obj) + irias_delete_object(irnet_server.ias_obj); + + /* Cleanup the socket part */ + irda_irnet_destroy(&irnet_server.s); + + DEXIT(IRDA_SERV_TRACE, "\n"); +} + + +/************************ IRDA-TTP CALLBACKS ************************/ +/* + * When we create a IrTTP instance, we pass to it a set of callbacks + * that IrTTP will call in case of various events. + * We take care of those events here. + */ + +/*------------------------------------------------------------------*/ +/* + * Function irnet_data_indication (instance, sap, skb) + * + * Received some data from TinyTP. Just queue it on the receive queue + * + */ +static int +irnet_data_indication(void * instance, + void * sap, + struct sk_buff *skb) +{ + irnet_socket * ap = (irnet_socket *) instance; + unsigned char * p; + int code = 0; + + DENTER(IRDA_TCB_TRACE, "(self/ap=0x%p, skb=0x%p)\n", + ap, skb); + DASSERT(skb != NULL, 0, IRDA_CB_ERROR, "skb is NULL !!!\n"); + + /* Check is ppp is ready to receive our packet */ + if(!ap->ppp_open) + { + DERROR(IRDA_CB_ERROR, "PPP not ready, dropping packet...\n"); + /* When we return error, TTP will need to requeue the skb and + * will stop the sender. IrTTP will stall until we send it a + * flow control request... */ + return -ENOMEM; + } + + /* strip address/control field if present */ + p = skb->data; + if((p[0] == PPP_ALLSTATIONS) && (p[1] == PPP_UI)) + { + /* chop off address/control */ + if(skb->len < 3) + goto err_exit; + p = skb_pull(skb, 2); + } + + /* decompress protocol field if compressed */ + if(p[0] & 1) + { + /* protocol is compressed */ + skb_push(skb, 1)[0] = 0; + } + else + if(skb->len < 2) + goto err_exit; + + /* pass to generic ppp layer */ + /* Note : how do I know if ppp can accept or not the packet ? This is + * essential if I want to manage flow control smoothly... */ + ppp_input(&ap->chan, skb); + + DEXIT(IRDA_TCB_TRACE, "\n"); + return 0; + + err_exit: + DERROR(IRDA_CB_ERROR, "Packet too small, dropping...\n"); + kfree_skb(skb); + ppp_input_error(&ap->chan, code); + return 0; /* Don't return an error code, only for flow control... */ +} + +/*------------------------------------------------------------------*/ +/* + * Function irnet_disconnect_indication (instance, sap, reason, skb) + * + * Connection has been closed. Chech reason to find out why + * + * Note : there are many cases where we come here : + * o attempted to connect, timeout + * o connected, link is broken, LAP has timeout + * o connected, other side close the link + * o connection request on the server not handled + */ +static void +irnet_disconnect_indication(void * instance, + void * sap, + LM_REASON reason, + struct sk_buff *skb) +{ + irnet_socket * self = (irnet_socket *) instance; + int test_open; + int test_connect; + + DENTER(IRDA_TCB_TRACE, "(self=0x%p)\n", self); + DASSERT(self != NULL, , IRDA_CB_ERROR, "Self is NULL !!!\n"); + + /* Don't care about it, but let's not leak it */ + if(skb) + dev_kfree_skb(skb); + + /* Prevent higher layer from accessing IrTTP */ + test_open = test_and_clear_bit(0, &self->ttp_open); + /* Not connecting anymore... + * (note : TSAP is open, so IAP callbacks are no longer pending...) */ + test_connect = test_and_clear_bit(0, &self->ttp_connect); + + /* If both self->ttp_open and self->ttp_connect are NULL, it mean that we + * have a race condition with irda_irnet_destroy() or + * irnet_connect_indication(), so don't mess up tsap... + */ + if(!(test_open || test_connect)) + { + DERROR(IRDA_CB_ERROR, "Race condition detected...\n"); + return; + } + + /* If we were active, notify the control channel */ + if(test_open) + irnet_post_event(self, IRNET_DISCONNECT_FROM, + self->saddr, self->daddr, self->rname, 0); + else + /* If we were trying to connect, notify the control channel */ + if((self->tsap) && (self != &irnet_server.s)) + irnet_post_event(self, IRNET_NOANSWER_FROM, + self->saddr, self->daddr, self->rname, 0); + + /* Close our IrTTP connection, cleanup tsap */ + if((self->tsap) && (self != &irnet_server.s)) + { + DEBUG(IRDA_CB_INFO, "Closing our TTP connection.\n"); + irttp_close_tsap(self->tsap); + self->tsap = NULL; + } + /* Cleanup the socket in case we want to reconnect in ppp_output_wakeup() */ + self->stsap_sel = 0; + self->daddr = DEV_ADDR_ANY; + self->tx_flow = FLOW_START; + + /* Deal with the ppp instance if it's still alive */ + if(self->ppp_open) + { + if(test_open) + { + /* ppp_unregister_channel() wants a user context. */ + schedule_work(&self->disconnect_work); + } + else + { + /* If we were trying to connect, flush (drain) ppp_generic + * Tx queue (most often we have blocked it), which will + * trigger an other attempt to connect. If we are passive, + * this will empty the Tx queue after last try. */ + ppp_output_wakeup(&self->chan); + } + } + + DEXIT(IRDA_TCB_TRACE, "\n"); +} + +/*------------------------------------------------------------------*/ +/* + * Function irnet_connect_confirm (instance, sap, qos, max_sdu_size, skb) + * + * Connections has been confirmed by the remote device + * + */ +static void +irnet_connect_confirm(void * instance, + void * sap, + struct qos_info *qos, + __u32 max_sdu_size, + __u8 max_header_size, + struct sk_buff *skb) +{ + irnet_socket * self = (irnet_socket *) instance; + + DENTER(IRDA_TCB_TRACE, "(self=0x%p)\n", self); + + /* Check if socket is closing down (via irda_irnet_destroy()) */ + if(! test_bit(0, &self->ttp_connect)) + { + DERROR(IRDA_CB_ERROR, "Socket no longer connecting. Ouch !\n"); + return; + } + + /* How much header space do we need to reserve */ + self->max_header_size = max_header_size; + + /* IrTTP max SDU size in transmit direction */ + self->max_sdu_size_tx = max_sdu_size; + self->max_data_size = max_sdu_size; +#ifdef STREAM_COMPAT + if(max_sdu_size == 0) + self->max_data_size = irttp_get_max_seg_size(self->tsap); +#endif /* STREAM_COMPAT */ + + /* At this point, IrLMP has assigned our source address */ + self->saddr = irttp_get_saddr(self->tsap); + + /* Allow higher layer to access IrTTP */ + set_bit(0, &self->ttp_open); + clear_bit(0, &self->ttp_connect); /* Not racy, IrDA traffic is serial */ + /* Give a kick in the ass of ppp_generic so that he sends us some data */ + ppp_output_wakeup(&self->chan); + + /* Check size of received packet */ + if(skb->len > 0) + { +#ifdef PASS_CONNECT_PACKETS + DEBUG(IRDA_CB_INFO, "Passing connect packet to PPP.\n"); + /* Try to pass it to PPP */ + irnet_data_indication(instance, sap, skb); +#else /* PASS_CONNECT_PACKETS */ + DERROR(IRDA_CB_ERROR, "Dropping non empty packet.\n"); + kfree_skb(skb); /* Note : will be optimised with other kfree... */ +#endif /* PASS_CONNECT_PACKETS */ + } + else + kfree_skb(skb); + + /* Notify the control channel */ + irnet_post_event(self, IRNET_CONNECT_TO, + self->saddr, self->daddr, self->rname, 0); + + DEXIT(IRDA_TCB_TRACE, "\n"); +} + +/*------------------------------------------------------------------*/ +/* + * Function irnet_flow_indication (instance, sap, flow) + * + * Used by TinyTP to tell us if it can accept more data or not + * + */ +static void +irnet_flow_indication(void * instance, + void * sap, + LOCAL_FLOW flow) +{ + irnet_socket * self = (irnet_socket *) instance; + LOCAL_FLOW oldflow = self->tx_flow; + + DENTER(IRDA_TCB_TRACE, "(self=0x%p, flow=%d)\n", self, flow); + + /* Update our state */ + self->tx_flow = flow; + + /* Check what IrTTP want us to do... */ + switch(flow) + { + case FLOW_START: + DEBUG(IRDA_CB_INFO, "IrTTP wants us to start again\n"); + /* Check if we really need to wake up PPP */ + if(oldflow == FLOW_STOP) + ppp_output_wakeup(&self->chan); + else + DEBUG(IRDA_CB_INFO, "But we were already transmitting !!!\n"); + break; + case FLOW_STOP: + DEBUG(IRDA_CB_INFO, "IrTTP wants us to slow down\n"); + break; + default: + DEBUG(IRDA_CB_INFO, "Unknown flow command!\n"); + break; + } + + DEXIT(IRDA_TCB_TRACE, "\n"); +} + +/*------------------------------------------------------------------*/ +/* + * Function irnet_status_indication (instance, sap, reason, skb) + * + * Link (IrLAP) status report. + * + */ +static void +irnet_status_indication(void * instance, + LINK_STATUS link, + LOCK_STATUS lock) +{ + irnet_socket * self = (irnet_socket *) instance; + + DENTER(IRDA_TCB_TRACE, "(self=0x%p)\n", self); + DASSERT(self != NULL, , IRDA_CB_ERROR, "Self is NULL !!!\n"); + + /* We can only get this event if we are connected */ + switch(link) + { + case STATUS_NO_ACTIVITY: + irnet_post_event(self, IRNET_BLOCKED_LINK, + self->saddr, self->daddr, self->rname, 0); + break; + default: + DEBUG(IRDA_CB_INFO, "Unknown status...\n"); + } + + DEXIT(IRDA_TCB_TRACE, "\n"); +} + +/*------------------------------------------------------------------*/ +/* + * Function irnet_connect_indication(instance, sap, qos, max_sdu_size, userdata) + * + * Incoming connection + * + * In theory, this function is called only on the server socket. + * Some other node is attempting to connect to the IrNET service, and has + * sent a connection request on our server socket. + * We just redirect the connection to the relevant IrNET socket. + * + * Note : we also make sure that between 2 irnet nodes, there can + * exist only one irnet connection. + */ +static void +irnet_connect_indication(void * instance, + void * sap, + struct qos_info *qos, + __u32 max_sdu_size, + __u8 max_header_size, + struct sk_buff *skb) +{ + irnet_socket * server = &irnet_server.s; + irnet_socket * new = (irnet_socket *) NULL; + + DENTER(IRDA_TCB_TRACE, "(server=0x%p)\n", server); + DASSERT(instance == &irnet_server, , IRDA_CB_ERROR, + "Invalid instance (0x%p) !!!\n", instance); + DASSERT(sap == irnet_server.s.tsap, , IRDA_CB_ERROR, "Invalid sap !!!\n"); + + /* Try to find the most appropriate IrNET socket */ + new = irnet_find_socket(server); + + /* After all this hard work, do we have an socket ? */ + if(new == (irnet_socket *) NULL) + { + DEXIT(IRDA_CB_INFO, ": No socket waiting for this connection.\n"); + irnet_disconnect_server(server, skb); + return; + } + + /* Is the socket already busy ? */ + if(test_bit(0, &new->ttp_open)) + { + DEXIT(IRDA_CB_INFO, ": Socket already connected.\n"); + irnet_disconnect_server(server, skb); + return; + } + + /* The following code is a bit tricky, so need comments ;-) + */ + /* If ttp_connect is set, the socket is trying to connect to the other + * end and may have sent a IrTTP connection request and is waiting for + * a connection response (that may never come). + * Now, the pain is that the socket may have opened a tsap and is + * waiting on it, while the other end is trying to connect to it on + * another tsap. + * Because IrNET can be peer to peer, we need to workaround this. + * Furthermore, the way the irnetd script is implemented, the + * target will create a second IrNET connection back to the + * originator and expect the originator to bind this new connection + * to the original PPPD instance. + * And of course, if we don't use irnetd, we can have a race when + * both side try to connect simultaneously, which could leave both + * connections half closed (yuck). + * Conclusions : + * 1) The "originator" must accept the new connection and get rid + * of the old one so that irnetd works + * 2) One side must deny the new connection to avoid races, + * but both side must agree on which side it is... + * Most often, the originator is primary at the LAP layer. + * Jean II + */ + /* Now, let's look at the way I wrote the test... + * We need to clear up the ttp_connect flag atomically to prevent + * irnet_disconnect_indication() to mess up the tsap we are going to close. + * We want to clear the ttp_connect flag only if we close the tsap, + * otherwise we will never close it, so we need to check for primary + * *before* doing the test on the flag. + * And of course, ALLOW_SIMULT_CONNECT can disable this entirely... + * Jean II + */ + + /* Socket already connecting ? On primary ? */ + if(0 +#ifdef ALLOW_SIMULT_CONNECT + || ((irttp_is_primary(server->tsap) == 1) && /* primary */ + (test_and_clear_bit(0, &new->ttp_connect))) +#endif /* ALLOW_SIMULT_CONNECT */ + ) + { + DERROR(IRDA_CB_ERROR, "Socket already connecting, but going to reuse it !\n"); + + /* Cleanup the old TSAP if necessary - IrIAP will be cleaned up later */ + if(new->tsap != NULL) + { + /* Close the old connection the new socket was attempting, + * so that we can hook it up to the new connection. + * It's now safe to do it... */ + irttp_close_tsap(new->tsap); + new->tsap = NULL; + } + } + else + { + /* Three options : + * 1) socket was not connecting or connected : ttp_connect should be 0. + * 2) we don't want to connect the socket because we are secondary or + * ALLOW_SIMULT_CONNECT is undefined. ttp_connect should be 1. + * 3) we are half way in irnet_disconnect_indication(), and it's a + * nice race condition... Fortunately, we can detect that by checking + * if tsap is still alive. On the other hand, we can't be in + * irda_irnet_destroy() otherwise we would not have found this + * socket in the hashbin. + * Jean II */ + if((test_bit(0, &new->ttp_connect)) || (new->tsap != NULL)) + { + /* Don't mess this socket, somebody else in in charge... */ + DERROR(IRDA_CB_ERROR, "Race condition detected, socket in use, abort connect...\n"); + irnet_disconnect_server(server, skb); + return; + } + } + + /* So : at this point, we have a socket, and it is idle. Good ! */ + irnet_connect_socket(server, new, qos, max_sdu_size, max_header_size); + + /* Check size of received packet */ + if(skb->len > 0) + { +#ifdef PASS_CONNECT_PACKETS + DEBUG(IRDA_CB_INFO, "Passing connect packet to PPP.\n"); + /* Try to pass it to PPP */ + irnet_data_indication(new, new->tsap, skb); +#else /* PASS_CONNECT_PACKETS */ + DERROR(IRDA_CB_ERROR, "Dropping non empty packet.\n"); + kfree_skb(skb); /* Note : will be optimised with other kfree... */ +#endif /* PASS_CONNECT_PACKETS */ + } + else + kfree_skb(skb); + + DEXIT(IRDA_TCB_TRACE, "\n"); +} + + +/********************** IRDA-IAS/LMP CALLBACKS **********************/ +/* + * These are the callbacks called by other layers of the IrDA stack, + * mainly LMP for discovery and IAS for name queries. + */ + +/*------------------------------------------------------------------*/ +/* + * Function irnet_getvalue_confirm (result, obj_id, value, priv) + * + * Got answer from remote LM-IAS, just connect + * + * This is the reply to a IAS query we were doing to find the TSAP of + * the device we want to connect to. + * If we have found a valid TSAP, just initiate the TTP connection + * on this TSAP. + */ +static void +irnet_getvalue_confirm(int result, + __u16 obj_id, + struct ias_value *value, + void * priv) +{ + irnet_socket * self = (irnet_socket *) priv; + + DENTER(IRDA_OCB_TRACE, "(self=0x%p)\n", self); + DASSERT(self != NULL, , IRDA_OCB_ERROR, "Self is NULL !!!\n"); + + /* Check if already connected (via irnet_connect_socket()) + * or socket is closing down (via irda_irnet_destroy()) */ + if(! test_bit(0, &self->ttp_connect)) + { + DERROR(IRDA_OCB_ERROR, "Socket no longer connecting. Ouch !\n"); + return; + } + + /* We probably don't need to make any more queries */ + iriap_close(self->iriap); + self->iriap = NULL; + + /* Post process the IAS reply */ + self->dtsap_sel = irnet_ias_to_tsap(self, result, value); + + /* If error, just go out */ + if(self->errno) + { + clear_bit(0, &self->ttp_connect); + DERROR(IRDA_OCB_ERROR, "IAS connect failed ! (0x%X)\n", self->errno); + return; + } + + DEBUG(IRDA_OCB_INFO, "daddr = %08x, lsap = %d, starting IrTTP connection\n", + self->daddr, self->dtsap_sel); + + /* Start up TTP - non blocking */ + irnet_connect_tsap(self); + + DEXIT(IRDA_OCB_TRACE, "\n"); +} + +/*------------------------------------------------------------------*/ +/* + * Function irnet_discovervalue_confirm (result, obj_id, value, priv) + * + * Handle the TSAP discovery procedure state machine. + * Got answer from remote LM-IAS, try next device + * + * We are doing a TSAP discovery procedure, and we got an answer to + * a IAS query we were doing to find the TSAP on one of the address + * in the discovery log. + * + * If we have found a valid TSAP for the first time, save it. If it's + * not the first time we found one, complain. + * + * If we have more addresses in the log, just initiate a new query. + * Note that those query may fail (see irnet_discover_daddr_and_lsap_sel()) + * + * Otherwise, wrap up the procedure (cleanup), check if we have found + * any device and connect to it. + */ +static void +irnet_discovervalue_confirm(int result, + __u16 obj_id, + struct ias_value *value, + void * priv) +{ + irnet_socket * self = (irnet_socket *) priv; + __u8 dtsap_sel; /* TSAP we are looking for */ + + DENTER(IRDA_OCB_TRACE, "(self=0x%p)\n", self); + DASSERT(self != NULL, , IRDA_OCB_ERROR, "Self is NULL !!!\n"); + + /* Check if already connected (via irnet_connect_socket()) + * or socket is closing down (via irda_irnet_destroy()) */ + if(! test_bit(0, &self->ttp_connect)) + { + DERROR(IRDA_OCB_ERROR, "Socket no longer connecting. Ouch !\n"); + return; + } + + /* Post process the IAS reply */ + dtsap_sel = irnet_ias_to_tsap(self, result, value); + + /* Have we got something ? */ + if(self->errno == 0) + { + /* We found the requested service */ + if(self->daddr != DEV_ADDR_ANY) + { + DERROR(IRDA_OCB_ERROR, "More than one device in range supports IrNET...\n"); + } + else + { + /* First time we found that one, save it ! */ + self->daddr = self->discoveries[self->disco_index].daddr; + self->dtsap_sel = dtsap_sel; + } + } + + /* If no failure */ + if((self->errno == -EADDRNOTAVAIL) || (self->errno == 0)) + { + int ret; + + /* Search the next node */ + ret = irnet_discover_next_daddr(self); + if(!ret) + { + /* In this case, the above request was non-blocking. + * We will return here after a while... */ + return; + } + /* In this case, we have processed the last discovery item */ + } + + /* No more queries to be done (failure or last one) */ + + /* We probably don't need to make any more queries */ + iriap_close(self->iriap); + self->iriap = NULL; + + /* No more items : remove the log and signal termination */ + DEBUG(IRDA_OCB_INFO, "Cleaning up log (0x%p)\n", + self->discoveries); + if(self->discoveries != NULL) + { + /* Cleanup our copy of the discovery log */ + kfree(self->discoveries); + self->discoveries = NULL; + } + self->disco_number = -1; + + /* Check out what we found */ + if(self->daddr == DEV_ADDR_ANY) + { + self->daddr = DEV_ADDR_ANY; + clear_bit(0, &self->ttp_connect); + DEXIT(IRDA_OCB_TRACE, ": cannot discover IrNET in any device !!!\n"); + return; + } + + /* We have a valid address - just connect */ + + DEBUG(IRDA_OCB_INFO, "daddr = %08x, lsap = %d, starting IrTTP connection\n", + self->daddr, self->dtsap_sel); + + /* Start up TTP - non blocking */ + irnet_connect_tsap(self); + + DEXIT(IRDA_OCB_TRACE, "\n"); +} + +#ifdef DISCOVERY_EVENTS +/*------------------------------------------------------------------*/ +/* + * Function irnet_discovery_indication (discovery) + * + * Got a discovery indication from IrLMP, post an event + * + * Note : IrLMP take care of matching the hint mask for us, and also + * check if it is a "new" node for us... + * + * As IrLMP filter on the IrLAN hint bit, we get both IrLAN and IrNET + * nodes, so it's only at connection time that we will know if the + * node support IrNET, IrLAN or both. The other solution is to check + * in IAS the PNP ids and service name. + * Note : even if a node support IrNET (or IrLAN), it's no guarantee + * that we will be able to connect to it, the node might already be + * busy... + * + * One last thing : in some case, this function will trigger duplicate + * discovery events. On the other hand, we should catch all + * discoveries properly (i.e. not miss one). Filtering duplicate here + * is to messy, so we leave that to user space... + */ +static void +irnet_discovery_indication(discinfo_t * discovery, + DISCOVERY_MODE mode, + void * priv) +{ + irnet_socket * self = &irnet_server.s; + + DENTER(IRDA_OCB_TRACE, "(self=0x%p)\n", self); + DASSERT(priv == &irnet_server, , IRDA_OCB_ERROR, + "Invalid instance (0x%p) !!!\n", priv); + + DEBUG(IRDA_OCB_INFO, "Discovered new IrNET/IrLAN node %s...\n", + discovery->info); + + /* Notify the control channel */ + irnet_post_event(NULL, IRNET_DISCOVER, + discovery->saddr, discovery->daddr, discovery->info, + get_unaligned((__u16 *)discovery->hints)); + + DEXIT(IRDA_OCB_TRACE, "\n"); +} + +/*------------------------------------------------------------------*/ +/* + * Function irnet_expiry_indication (expiry) + * + * Got a expiry indication from IrLMP, post an event + * + * Note : IrLMP take care of matching the hint mask for us, we only + * check if it is a "new" node... + */ +static void +irnet_expiry_indication(discinfo_t * expiry, + DISCOVERY_MODE mode, + void * priv) +{ + irnet_socket * self = &irnet_server.s; + + DENTER(IRDA_OCB_TRACE, "(self=0x%p)\n", self); + DASSERT(priv == &irnet_server, , IRDA_OCB_ERROR, + "Invalid instance (0x%p) !!!\n", priv); + + DEBUG(IRDA_OCB_INFO, "IrNET/IrLAN node %s expired...\n", + expiry->info); + + /* Notify the control channel */ + irnet_post_event(NULL, IRNET_EXPIRE, + expiry->saddr, expiry->daddr, expiry->info, + get_unaligned((__u16 *)expiry->hints)); + + DEXIT(IRDA_OCB_TRACE, "\n"); +} +#endif /* DISCOVERY_EVENTS */ + + +/*********************** PROC ENTRY CALLBACKS ***********************/ +/* + * We create a instance in the /proc filesystem, and here we take care + * of that... + */ + +#ifdef CONFIG_PROC_FS +static int +irnet_proc_show(struct seq_file *m, void *v) +{ + irnet_socket * self; + char * state; + int i = 0; + + /* Get the IrNET server information... */ + seq_printf(m, "IrNET server - "); + seq_printf(m, "IrDA state: %s, ", + (irnet_server.running ? "running" : "dead")); + seq_printf(m, "stsap_sel: %02x, ", irnet_server.s.stsap_sel); + seq_printf(m, "dtsap_sel: %02x\n", irnet_server.s.dtsap_sel); + + /* Do we need to continue ? */ + if(!irnet_server.running) + return 0; + + /* Protect access to the instance list */ + spin_lock_bh(&irnet_server.spinlock); + + /* Get the sockets one by one... */ + self = (irnet_socket *) hashbin_get_first(irnet_server.list); + while(self != NULL) + { + /* Start printing info about the socket. */ + seq_printf(m, "\nIrNET socket %d - ", i++); + + /* First, get the requested configuration */ + seq_printf(m, "Requested IrDA name: \"%s\", ", self->rname); + seq_printf(m, "daddr: %08x, ", self->rdaddr); + seq_printf(m, "saddr: %08x\n", self->rsaddr); + + /* Second, get all the PPP info */ + seq_printf(m, " PPP state: %s", + (self->ppp_open ? "registered" : "unregistered")); + if(self->ppp_open) + { + seq_printf(m, ", unit: ppp%d", + ppp_unit_number(&self->chan)); + seq_printf(m, ", channel: %d", + ppp_channel_index(&self->chan)); + seq_printf(m, ", mru: %d", + self->mru); + /* Maybe add self->flags ? Later... */ + } + + /* Then, get all the IrDA specific info... */ + if(self->ttp_open) + state = "connected"; + else + if(self->tsap != NULL) + state = "connecting"; + else + if(self->iriap != NULL) + state = "searching"; + else + if(self->ttp_connect) + state = "weird"; + else + state = "idle"; + seq_printf(m, "\n IrDA state: %s, ", state); + seq_printf(m, "daddr: %08x, ", self->daddr); + seq_printf(m, "stsap_sel: %02x, ", self->stsap_sel); + seq_printf(m, "dtsap_sel: %02x\n", self->dtsap_sel); + + /* Next socket, please... */ + self = (irnet_socket *) hashbin_get_next(irnet_server.list); + } + + /* Spin lock end */ + spin_unlock_bh(&irnet_server.spinlock); + + return 0; +} + +static int irnet_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, irnet_proc_show, NULL); +} + +static const struct file_operations irnet_proc_fops = { + .owner = THIS_MODULE, + .open = irnet_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +#endif /* PROC_FS */ + + +/********************** CONFIGURATION/CLEANUP **********************/ +/* + * Initialisation and teardown of the IrDA part, called at module + * insertion and removal... + */ + +/*------------------------------------------------------------------*/ +/* + * Prepare the IrNET layer for operation... + */ +int __init +irda_irnet_init(void) +{ + int err = 0; + + DENTER(MODULE_TRACE, "()\n"); + + /* Pure paranoia - should be redundant */ + memset(&irnet_server, 0, sizeof(struct irnet_root)); + + /* Setup start of irnet instance list */ + irnet_server.list = hashbin_new(HB_NOLOCK); + DABORT(irnet_server.list == NULL, -ENOMEM, + MODULE_ERROR, "Can't allocate hashbin!\n"); + /* Init spinlock for instance list */ + spin_lock_init(&irnet_server.spinlock); + + /* Initialise control channel */ + init_waitqueue_head(&irnet_events.rwait); + irnet_events.index = 0; + /* Init spinlock for event logging */ + spin_lock_init(&irnet_events.spinlock); + +#ifdef CONFIG_PROC_FS + /* Add a /proc file for irnet infos */ + proc_create("irnet", 0, proc_irda, &irnet_proc_fops); +#endif /* CONFIG_PROC_FS */ + + /* Setup the IrNET server */ + err = irnet_setup_server(); + + if(!err) + /* We are no longer functional... */ + irnet_server.running = 1; + + DEXIT(MODULE_TRACE, "\n"); + return err; +} + +/*------------------------------------------------------------------*/ +/* + * Cleanup at exit... + */ +void __exit +irda_irnet_cleanup(void) +{ + DENTER(MODULE_TRACE, "()\n"); + + /* We are no longer there... */ + irnet_server.running = 0; + +#ifdef CONFIG_PROC_FS + /* Remove our /proc file */ + remove_proc_entry("irnet", proc_irda); +#endif /* CONFIG_PROC_FS */ + + /* Remove our IrNET server from existence */ + irnet_destroy_server(); + + /* Remove all instances of IrNET socket still present */ + hashbin_delete(irnet_server.list, (FREE_FUNC) irda_irnet_destroy); + + DEXIT(MODULE_TRACE, "\n"); +} diff --git a/kernel/net/irda/irnet/irnet_irda.h b/kernel/net/irda/irnet/irnet_irda.h new file mode 100644 index 000000000..3e408952a --- /dev/null +++ b/kernel/net/irda/irnet/irnet_irda.h @@ -0,0 +1,178 @@ +/* + * IrNET protocol module : Synchronous PPP over an IrDA socket. + * + * Jean II - HPL `00 - <jt@hpl.hp.com> + * + * This file contains all definitions and declarations necessary for the + * IRDA part of the IrNET module (dealing with IrTTP, IrIAS and co). + * This file is a private header, so other modules don't want to know + * what's in there... + */ + +#ifndef IRNET_IRDA_H +#define IRNET_IRDA_H + +/***************************** INCLUDES *****************************/ +/* Please add other headers in irnet.h */ + +#include "irnet.h" /* Module global include */ + +/************************ CONSTANTS & MACROS ************************/ + +/* + * Name of the service (socket name) used by IrNET + */ +/* IAS object name (or part of it) */ +#define IRNET_SERVICE_NAME "IrNetv1" +/* IAS attribute */ +#define IRNET_IAS_VALUE "IrDA:TinyTP:LsapSel" +/* LMP notify name for client (only for /proc/net/irda/irlmp) */ +#define IRNET_NOTIFY_NAME "IrNET socket" +/* LMP notify name for server (only for /proc/net/irda/irlmp) */ +#define IRNET_NOTIFY_NAME_SERV "IrNET server" + +/****************************** TYPES ******************************/ + +/* + * This is the main structure where we store all the data pertaining to + * the IrNET server (listen for connection requests) and the root + * of the IrNET socket list + */ +typedef struct irnet_root +{ + irnet_socket s; /* To pretend we are a client... */ + + /* Generic stuff */ + int magic; /* Paranoia */ + int running; /* Are we operational ? */ + + /* Link list of all IrNET instances opened */ + hashbin_t * list; + spinlock_t spinlock; /* Serialize access to the list */ + /* Note : the way hashbin has been designed is absolutely not + * reentrant, beware... So, we blindly protect all with spinlock */ + + /* Handle for the hint bit advertised in IrLMP */ + void * skey; + + /* Server socket part */ + struct ias_object * ias_obj; /* Our service name + lsap in IAS */ + +} irnet_root; + + +/**************************** PROTOTYPES ****************************/ + +/* ----------------------- CONTROL CHANNEL ----------------------- */ +static void + irnet_post_event(irnet_socket *, + irnet_event, + __u32, + __u32, + char *, + __u16); +/* ----------------------- IRDA SUBROUTINES ----------------------- */ +static inline int + irnet_open_tsap(irnet_socket *); +static inline __u8 + irnet_ias_to_tsap(irnet_socket *, + int, + struct ias_value *); +static inline int + irnet_find_lsap_sel(irnet_socket *); +static inline int + irnet_connect_tsap(irnet_socket *); +static inline int + irnet_discover_next_daddr(irnet_socket *); +static inline int + irnet_discover_daddr_and_lsap_sel(irnet_socket *); +static inline int + irnet_dname_to_daddr(irnet_socket *); +/* ------------------------ SERVER SOCKET ------------------------ */ +static inline int + irnet_daddr_to_dname(irnet_socket *); +static inline irnet_socket * + irnet_find_socket(irnet_socket *); +static inline int + irnet_connect_socket(irnet_socket *, + irnet_socket *, + struct qos_info *, + __u32, + __u8); +static inline void + irnet_disconnect_server(irnet_socket *, + struct sk_buff *); +static inline int + irnet_setup_server(void); +static inline void + irnet_destroy_server(void); +/* ---------------------- IRDA-TTP CALLBACKS ---------------------- */ +static int + irnet_data_indication(void *, /* instance */ + void *, /* sap */ + struct sk_buff *); +static void + irnet_disconnect_indication(void *, + void *, + LM_REASON, + struct sk_buff *); +static void + irnet_connect_confirm(void *, + void *, + struct qos_info *, + __u32, + __u8, + struct sk_buff *); +static void + irnet_flow_indication(void *, + void *, + LOCAL_FLOW); +static void + irnet_status_indication(void *, + LINK_STATUS, + LOCK_STATUS); +static void + irnet_connect_indication(void *, + void *, + struct qos_info *, + __u32, + __u8, + struct sk_buff *); +/* -------------------- IRDA-IAS/LMP CALLBACKS -------------------- */ +static void + irnet_getvalue_confirm(int, + __u16, + struct ias_value *, + void *); +static void + irnet_discovervalue_confirm(int, + __u16, + struct ias_value *, + void *); +#ifdef DISCOVERY_EVENTS +static void + irnet_discovery_indication(discinfo_t *, + DISCOVERY_MODE, + void *); +static void + irnet_expiry_indication(discinfo_t *, + DISCOVERY_MODE, + void *); +#endif + +/**************************** VARIABLES ****************************/ + +/* + * The IrNET server. Listen to connection requests and co... + */ +static struct irnet_root irnet_server; + +/* Control channel stuff (note : extern) */ +struct irnet_ctrl_channel irnet_events; + +/* The /proc/net/irda directory, defined elsewhere... */ +#ifdef CONFIG_PROC_FS +extern struct proc_dir_entry *proc_irda; +#endif /* CONFIG_PROC_FS */ + +#endif /* IRNET_IRDA_H */ diff --git a/kernel/net/irda/irnet/irnet_ppp.c b/kernel/net/irda/irnet/irnet_ppp.c new file mode 100644 index 000000000..1215693fd --- /dev/null +++ b/kernel/net/irda/irnet/irnet_ppp.c @@ -0,0 +1,1188 @@ +/* + * IrNET protocol module : Synchronous PPP over an IrDA socket. + * + * Jean II - HPL `00 - <jt@hpl.hp.com> + * + * This file implement the PPP interface and /dev/irnet character device. + * The PPP interface hook to the ppp_generic module, handle all our + * relationship to the PPP code in the kernel (and by extension to pppd), + * and exchange PPP frames with this module (send/receive). + * The /dev/irnet device is used primarily for 2 functions : + * 1) as a stub for pppd (the ppp daemon), so that we can appropriately + * generate PPP sessions (we pretend we are a tty). + * 2) as a control channel (write commands, read events) + */ + +#include <linux/sched.h> +#include <linux/slab.h> +#include "irnet_ppp.h" /* Private header */ +/* Please put other headers in irnet.h - Thanks */ + +/* Generic PPP callbacks (to call us) */ +static const struct ppp_channel_ops irnet_ppp_ops = { + .start_xmit = ppp_irnet_send, + .ioctl = ppp_irnet_ioctl +}; + +/************************* CONTROL CHANNEL *************************/ +/* + * When a pppd instance is not active on /dev/irnet, it acts as a control + * channel. + * Writing allow to set up the IrDA destination of the IrNET channel, + * and any application may be read events happening in IrNET... + */ + +/*------------------------------------------------------------------*/ +/* + * Write is used to send a command to configure a IrNET channel + * before it is open by pppd. The syntax is : "command argument" + * Currently there is only two defined commands : + * o name : set the requested IrDA nickname of the IrNET peer. + * o addr : set the requested IrDA address of the IrNET peer. + * Note : the code is crude, but effective... + */ +static inline ssize_t +irnet_ctrl_write(irnet_socket * ap, + const char __user *buf, + size_t count) +{ + char command[IRNET_MAX_COMMAND]; + char * start; /* Current command being processed */ + char * next; /* Next command to process */ + int length; /* Length of current command */ + + DENTER(CTRL_TRACE, "(ap=0x%p, count=%Zd)\n", ap, count); + + /* Check for overflow... */ + DABORT(count >= IRNET_MAX_COMMAND, -ENOMEM, + CTRL_ERROR, "Too much data !!!\n"); + + /* Get the data in the driver */ + if(copy_from_user(command, buf, count)) + { + DERROR(CTRL_ERROR, "Invalid user space pointer.\n"); + return -EFAULT; + } + + /* Safe terminate the string */ + command[count] = '\0'; + DEBUG(CTRL_INFO, "Command line received is ``%s'' (%Zd).\n", + command, count); + + /* Check every commands in the command line */ + next = command; + while(next != NULL) + { + /* Look at the next command */ + start = next; + + /* Scrap whitespaces before the command */ + start = skip_spaces(start); + + /* ',' is our command separator */ + next = strchr(start, ','); + if(next) + { + *next = '\0'; /* Terminate command */ + length = next - start; /* Length */ + next++; /* Skip the '\0' */ + } + else + length = strlen(start); + + DEBUG(CTRL_INFO, "Found command ``%s'' (%d).\n", start, length); + + /* Check if we recognised one of the known command + * We can't use "switch" with strings, so hack with "continue" */ + + /* First command : name -> Requested IrDA nickname */ + if(!strncmp(start, "name", 4)) + { + /* Copy the name only if is included and not "any" */ + if((length > 5) && (strcmp(start + 5, "any"))) + { + /* Strip out trailing whitespaces */ + while(isspace(start[length - 1])) + length--; + + DABORT(length < 5 || length > NICKNAME_MAX_LEN + 5, + -EINVAL, CTRL_ERROR, "Invalid nickname.\n"); + + /* Copy the name for later reuse */ + memcpy(ap->rname, start + 5, length - 5); + ap->rname[length - 5] = '\0'; + } + else + ap->rname[0] = '\0'; + DEBUG(CTRL_INFO, "Got rname = ``%s''\n", ap->rname); + + /* Restart the loop */ + continue; + } + + /* Second command : addr, daddr -> Requested IrDA destination address + * Also process : saddr -> Requested IrDA source address */ + if((!strncmp(start, "addr", 4)) || + (!strncmp(start, "daddr", 5)) || + (!strncmp(start, "saddr", 5))) + { + __u32 addr = DEV_ADDR_ANY; + + /* Copy the address only if is included and not "any" */ + if((length > 5) && (strcmp(start + 5, "any"))) + { + char * begp = start + 5; + char * endp; + + /* Scrap whitespaces before the command */ + begp = skip_spaces(begp); + + /* Convert argument to a number (last arg is the base) */ + addr = simple_strtoul(begp, &endp, 16); + /* Has it worked ? (endp should be start + length) */ + DABORT(endp <= (start + 5), -EINVAL, + CTRL_ERROR, "Invalid address.\n"); + } + /* Which type of address ? */ + if(start[0] == 's') + { + /* Save it */ + ap->rsaddr = addr; + DEBUG(CTRL_INFO, "Got rsaddr = %08x\n", ap->rsaddr); + } + else + { + /* Save it */ + ap->rdaddr = addr; + DEBUG(CTRL_INFO, "Got rdaddr = %08x\n", ap->rdaddr); + } + + /* Restart the loop */ + continue; + } + + /* Other possible command : connect N (number of retries) */ + + /* No command matched -> Failed... */ + DABORT(1, -EINVAL, CTRL_ERROR, "Not a recognised IrNET command.\n"); + } + + /* Success : we have parsed all commands successfully */ + return count; +} + +#ifdef INITIAL_DISCOVERY +/*------------------------------------------------------------------*/ +/* + * Function irnet_get_discovery_log (self) + * + * Query the content on the discovery log if not done + * + * This function query the current content of the discovery log + * at the startup of the event channel and save it in the internal struct. + */ +static void +irnet_get_discovery_log(irnet_socket * ap) +{ + __u16 mask = irlmp_service_to_hint(S_LAN); + + /* Ask IrLMP for the current discovery log */ + ap->discoveries = irlmp_get_discoveries(&ap->disco_number, mask, + DISCOVERY_DEFAULT_SLOTS); + + /* Check if the we got some results */ + if(ap->discoveries == NULL) + ap->disco_number = -1; + + DEBUG(CTRL_INFO, "Got the log (0x%p), size is %d\n", + ap->discoveries, ap->disco_number); +} + +/*------------------------------------------------------------------*/ +/* + * Function irnet_read_discovery_log (self, event) + * + * Read the content on the discovery log + * + * This function dump the current content of the discovery log + * at the startup of the event channel. + * Return 1 if wrote an event on the control channel... + * + * State of the ap->disco_XXX variables : + * Socket creation : discoveries = NULL ; disco_index = 0 ; disco_number = 0 + * While reading : discoveries = ptr ; disco_index = X ; disco_number = Y + * After reading : discoveries = NULL ; disco_index = Y ; disco_number = -1 + */ +static inline int +irnet_read_discovery_log(irnet_socket *ap, char *event, int buf_size) +{ + int done_event = 0; + + DENTER(CTRL_TRACE, "(ap=0x%p, event=0x%p)\n", + ap, event); + + /* Test if we have some work to do or we have already finished */ + if(ap->disco_number == -1) + { + DEBUG(CTRL_INFO, "Already done\n"); + return 0; + } + + /* Test if it's the first time and therefore we need to get the log */ + if(ap->discoveries == NULL) + irnet_get_discovery_log(ap); + + /* Check if we have more item to dump */ + if(ap->disco_index < ap->disco_number) + { + /* Write an event */ + snprintf(event, buf_size, + "Found %08x (%s) behind %08x {hints %02X-%02X}\n", + ap->discoveries[ap->disco_index].daddr, + ap->discoveries[ap->disco_index].info, + ap->discoveries[ap->disco_index].saddr, + ap->discoveries[ap->disco_index].hints[0], + ap->discoveries[ap->disco_index].hints[1]); + DEBUG(CTRL_INFO, "Writing discovery %d : %s\n", + ap->disco_index, ap->discoveries[ap->disco_index].info); + + /* We have an event */ + done_event = 1; + /* Next discovery */ + ap->disco_index++; + } + + /* Check if we have done the last item */ + if(ap->disco_index >= ap->disco_number) + { + /* No more items : remove the log and signal termination */ + DEBUG(CTRL_INFO, "Cleaning up log (0x%p)\n", + ap->discoveries); + if(ap->discoveries != NULL) + { + /* Cleanup our copy of the discovery log */ + kfree(ap->discoveries); + ap->discoveries = NULL; + } + ap->disco_number = -1; + } + + return done_event; +} +#endif /* INITIAL_DISCOVERY */ + +/*------------------------------------------------------------------*/ +/* + * Read is used to get IrNET events + */ +static inline ssize_t +irnet_ctrl_read(irnet_socket * ap, + struct file * file, + char __user * buf, + size_t count) +{ + DECLARE_WAITQUEUE(wait, current); + char event[75]; + ssize_t ret = 0; + + DENTER(CTRL_TRACE, "(ap=0x%p, count=%Zd)\n", ap, count); + +#ifdef INITIAL_DISCOVERY + /* Check if we have read the log */ + if (irnet_read_discovery_log(ap, event, sizeof(event))) + { + count = min(strlen(event), count); + if (copy_to_user(buf, event, count)) + { + DERROR(CTRL_ERROR, "Invalid user space pointer.\n"); + return -EFAULT; + } + + DEXIT(CTRL_TRACE, "\n"); + return count; + } +#endif /* INITIAL_DISCOVERY */ + + /* Put ourselves on the wait queue to be woken up */ + add_wait_queue(&irnet_events.rwait, &wait); + set_current_state(TASK_INTERRUPTIBLE); + for(;;) + { + /* If there is unread events */ + ret = 0; + if(ap->event_index != irnet_events.index) + break; + ret = -EAGAIN; + if(file->f_flags & O_NONBLOCK) + break; + ret = -ERESTARTSYS; + if(signal_pending(current)) + break; + /* Yield and wait to be woken up */ + schedule(); + } + __set_current_state(TASK_RUNNING); + remove_wait_queue(&irnet_events.rwait, &wait); + + /* Did we got it ? */ + if(ret != 0) + { + /* No, return the error code */ + DEXIT(CTRL_TRACE, " - ret %Zd\n", ret); + return ret; + } + + /* Which event is it ? */ + switch(irnet_events.log[ap->event_index].event) + { + case IRNET_DISCOVER: + snprintf(event, sizeof(event), + "Discovered %08x (%s) behind %08x {hints %02X-%02X}\n", + irnet_events.log[ap->event_index].daddr, + irnet_events.log[ap->event_index].name, + irnet_events.log[ap->event_index].saddr, + irnet_events.log[ap->event_index].hints.byte[0], + irnet_events.log[ap->event_index].hints.byte[1]); + break; + case IRNET_EXPIRE: + snprintf(event, sizeof(event), + "Expired %08x (%s) behind %08x {hints %02X-%02X}\n", + irnet_events.log[ap->event_index].daddr, + irnet_events.log[ap->event_index].name, + irnet_events.log[ap->event_index].saddr, + irnet_events.log[ap->event_index].hints.byte[0], + irnet_events.log[ap->event_index].hints.byte[1]); + break; + case IRNET_CONNECT_TO: + snprintf(event, sizeof(event), "Connected to %08x (%s) on ppp%d\n", + irnet_events.log[ap->event_index].daddr, + irnet_events.log[ap->event_index].name, + irnet_events.log[ap->event_index].unit); + break; + case IRNET_CONNECT_FROM: + snprintf(event, sizeof(event), "Connection from %08x (%s) on ppp%d\n", + irnet_events.log[ap->event_index].daddr, + irnet_events.log[ap->event_index].name, + irnet_events.log[ap->event_index].unit); + break; + case IRNET_REQUEST_FROM: + snprintf(event, sizeof(event), "Request from %08x (%s) behind %08x\n", + irnet_events.log[ap->event_index].daddr, + irnet_events.log[ap->event_index].name, + irnet_events.log[ap->event_index].saddr); + break; + case IRNET_NOANSWER_FROM: + snprintf(event, sizeof(event), "No-answer from %08x (%s) on ppp%d\n", + irnet_events.log[ap->event_index].daddr, + irnet_events.log[ap->event_index].name, + irnet_events.log[ap->event_index].unit); + break; + case IRNET_BLOCKED_LINK: + snprintf(event, sizeof(event), "Blocked link with %08x (%s) on ppp%d\n", + irnet_events.log[ap->event_index].daddr, + irnet_events.log[ap->event_index].name, + irnet_events.log[ap->event_index].unit); + break; + case IRNET_DISCONNECT_FROM: + snprintf(event, sizeof(event), "Disconnection from %08x (%s) on ppp%d\n", + irnet_events.log[ap->event_index].daddr, + irnet_events.log[ap->event_index].name, + irnet_events.log[ap->event_index].unit); + break; + case IRNET_DISCONNECT_TO: + snprintf(event, sizeof(event), "Disconnected to %08x (%s)\n", + irnet_events.log[ap->event_index].daddr, + irnet_events.log[ap->event_index].name); + break; + default: + snprintf(event, sizeof(event), "Bug\n"); + } + /* Increment our event index */ + ap->event_index = (ap->event_index + 1) % IRNET_MAX_EVENTS; + + DEBUG(CTRL_INFO, "Event is :%s", event); + + count = min(strlen(event), count); + if (copy_to_user(buf, event, count)) + { + DERROR(CTRL_ERROR, "Invalid user space pointer.\n"); + return -EFAULT; + } + + DEXIT(CTRL_TRACE, "\n"); + return count; +} + +/*------------------------------------------------------------------*/ +/* + * Poll : called when someone do a select on /dev/irnet. + * Just check if there are new events... + */ +static inline unsigned int +irnet_ctrl_poll(irnet_socket * ap, + struct file * file, + poll_table * wait) +{ + unsigned int mask; + + DENTER(CTRL_TRACE, "(ap=0x%p)\n", ap); + + poll_wait(file, &irnet_events.rwait, wait); + mask = POLLOUT | POLLWRNORM; + /* If there is unread events */ + if(ap->event_index != irnet_events.index) + mask |= POLLIN | POLLRDNORM; +#ifdef INITIAL_DISCOVERY + if(ap->disco_number != -1) + { + /* Test if it's the first time and therefore we need to get the log */ + if(ap->discoveries == NULL) + irnet_get_discovery_log(ap); + /* Recheck */ + if(ap->disco_number != -1) + mask |= POLLIN | POLLRDNORM; + } +#endif /* INITIAL_DISCOVERY */ + + DEXIT(CTRL_TRACE, " - mask=0x%X\n", mask); + return mask; +} + + +/*********************** FILESYSTEM CALLBACKS ***********************/ +/* + * Implement the usual open, read, write functions that will be called + * by the file system when some action is performed on /dev/irnet. + * Most of those actions will in fact be performed by "pppd" or + * the control channel, we just act as a redirector... + */ + +/*------------------------------------------------------------------*/ +/* + * Open : when somebody open /dev/irnet + * We basically create a new instance of irnet and initialise it. + */ +static int +dev_irnet_open(struct inode * inode, + struct file * file) +{ + struct irnet_socket * ap; + int err; + + DENTER(FS_TRACE, "(file=0x%p)\n", file); + +#ifdef SECURE_DEVIRNET + /* This could (should?) be enforced by the permissions on /dev/irnet. */ + if(!capable(CAP_NET_ADMIN)) + return -EPERM; +#endif /* SECURE_DEVIRNET */ + + /* Allocate a private structure for this IrNET instance */ + ap = kzalloc(sizeof(*ap), GFP_KERNEL); + DABORT(ap == NULL, -ENOMEM, FS_ERROR, "Can't allocate struct irnet...\n"); + + /* initialize the irnet structure */ + ap->file = file; + + /* PPP channel setup */ + ap->ppp_open = 0; + ap->chan.private = ap; + ap->chan.ops = &irnet_ppp_ops; + ap->chan.mtu = (2048 - TTP_MAX_HEADER - 2 - PPP_HDRLEN); + ap->chan.hdrlen = 2 + TTP_MAX_HEADER; /* for A/C + Max IrDA hdr */ + /* PPP parameters */ + ap->mru = (2048 - TTP_MAX_HEADER - 2 - PPP_HDRLEN); + ap->xaccm[0] = ~0U; + ap->xaccm[3] = 0x60000000U; + ap->raccm = ~0U; + + /* Setup the IrDA part... */ + err = irda_irnet_create(ap); + if(err) + { + DERROR(FS_ERROR, "Can't setup IrDA link...\n"); + kfree(ap); + + return err; + } + + /* For the control channel */ + ap->event_index = irnet_events.index; /* Cancel all past events */ + + mutex_init(&ap->lock); + + /* Put our stuff where we will be able to find it later */ + file->private_data = ap; + + DEXIT(FS_TRACE, " - ap=0x%p\n", ap); + + return 0; +} + + +/*------------------------------------------------------------------*/ +/* + * Close : when somebody close /dev/irnet + * Destroy the instance of /dev/irnet + */ +static int +dev_irnet_close(struct inode * inode, + struct file * file) +{ + irnet_socket * ap = file->private_data; + + DENTER(FS_TRACE, "(file=0x%p, ap=0x%p)\n", + file, ap); + DABORT(ap == NULL, 0, FS_ERROR, "ap is NULL !!!\n"); + + /* Detach ourselves */ + file->private_data = NULL; + + /* Close IrDA stuff */ + irda_irnet_destroy(ap); + + /* Disconnect from the generic PPP layer if not already done */ + if(ap->ppp_open) + { + DERROR(FS_ERROR, "Channel still registered - deregistering !\n"); + ap->ppp_open = 0; + ppp_unregister_channel(&ap->chan); + } + + kfree(ap); + + DEXIT(FS_TRACE, "\n"); + return 0; +} + +/*------------------------------------------------------------------*/ +/* + * Write does nothing. + * (we receive packet from ppp_generic through ppp_irnet_send()) + */ +static ssize_t +dev_irnet_write(struct file * file, + const char __user *buf, + size_t count, + loff_t * ppos) +{ + irnet_socket * ap = file->private_data; + + DPASS(FS_TRACE, "(file=0x%p, ap=0x%p, count=%Zd)\n", + file, ap, count); + DABORT(ap == NULL, -ENXIO, FS_ERROR, "ap is NULL !!!\n"); + + /* If we are connected to ppp_generic, let it handle the job */ + if(ap->ppp_open) + return -EAGAIN; + else + return irnet_ctrl_write(ap, buf, count); +} + +/*------------------------------------------------------------------*/ +/* + * Read doesn't do much either. + * (pppd poll us, but ultimately reads through /dev/ppp) + */ +static ssize_t +dev_irnet_read(struct file * file, + char __user * buf, + size_t count, + loff_t * ppos) +{ + irnet_socket * ap = file->private_data; + + DPASS(FS_TRACE, "(file=0x%p, ap=0x%p, count=%Zd)\n", + file, ap, count); + DABORT(ap == NULL, -ENXIO, FS_ERROR, "ap is NULL !!!\n"); + + /* If we are connected to ppp_generic, let it handle the job */ + if(ap->ppp_open) + return -EAGAIN; + else + return irnet_ctrl_read(ap, file, buf, count); +} + +/*------------------------------------------------------------------*/ +/* + * Poll : called when someone do a select on /dev/irnet + */ +static unsigned int +dev_irnet_poll(struct file * file, + poll_table * wait) +{ + irnet_socket * ap = file->private_data; + unsigned int mask; + + DENTER(FS_TRACE, "(file=0x%p, ap=0x%p)\n", + file, ap); + + mask = POLLOUT | POLLWRNORM; + DABORT(ap == NULL, mask, FS_ERROR, "ap is NULL !!!\n"); + + /* If we are connected to ppp_generic, let it handle the job */ + if(!ap->ppp_open) + mask |= irnet_ctrl_poll(ap, file, wait); + + DEXIT(FS_TRACE, " - mask=0x%X\n", mask); + return mask; +} + +/*------------------------------------------------------------------*/ +/* + * IOCtl : Called when someone does some ioctls on /dev/irnet + * This is the way pppd configure us and control us while the PPP + * instance is active. + */ +static long +dev_irnet_ioctl( + struct file * file, + unsigned int cmd, + unsigned long arg) +{ + irnet_socket * ap = file->private_data; + int err; + int val; + void __user *argp = (void __user *)arg; + + DENTER(FS_TRACE, "(file=0x%p, ap=0x%p, cmd=0x%X)\n", + file, ap, cmd); + + /* Basic checks... */ + DASSERT(ap != NULL, -ENXIO, PPP_ERROR, "ap is NULL...\n"); +#ifdef SECURE_DEVIRNET + if(!capable(CAP_NET_ADMIN)) + return -EPERM; +#endif /* SECURE_DEVIRNET */ + + err = -EFAULT; + switch(cmd) + { + /* Set discipline (should be N_SYNC_PPP or N_TTY) */ + case TIOCSETD: + if(get_user(val, (int __user *)argp)) + break; + if((val == N_SYNC_PPP) || (val == N_PPP)) + { + DEBUG(FS_INFO, "Entering PPP discipline.\n"); + /* PPP channel setup (ap->chan in configured in dev_irnet_open())*/ + if (mutex_lock_interruptible(&ap->lock)) + return -EINTR; + + err = ppp_register_channel(&ap->chan); + if(err == 0) + { + /* Our ppp side is active */ + ap->ppp_open = 1; + + DEBUG(FS_INFO, "Trying to establish a connection.\n"); + /* Setup the IrDA link now - may fail... */ + irda_irnet_connect(ap); + } + else + DERROR(FS_ERROR, "Can't setup PPP channel...\n"); + + mutex_unlock(&ap->lock); + } + else + { + /* In theory, should be N_TTY */ + DEBUG(FS_INFO, "Exiting PPP discipline.\n"); + /* Disconnect from the generic PPP layer */ + if (mutex_lock_interruptible(&ap->lock)) + return -EINTR; + + if(ap->ppp_open) + { + ap->ppp_open = 0; + ppp_unregister_channel(&ap->chan); + } + else + DERROR(FS_ERROR, "Channel not registered !\n"); + err = 0; + + mutex_unlock(&ap->lock); + } + break; + + /* Query PPP channel and unit number */ + case PPPIOCGCHAN: + if (mutex_lock_interruptible(&ap->lock)) + return -EINTR; + + if(ap->ppp_open && !put_user(ppp_channel_index(&ap->chan), + (int __user *)argp)) + err = 0; + + mutex_unlock(&ap->lock); + break; + case PPPIOCGUNIT: + if (mutex_lock_interruptible(&ap->lock)) + return -EINTR; + + if(ap->ppp_open && !put_user(ppp_unit_number(&ap->chan), + (int __user *)argp)) + err = 0; + + mutex_unlock(&ap->lock); + break; + + /* All these ioctls can be passed both directly and from ppp_generic, + * so we just deal with them in one place... + */ + case PPPIOCGFLAGS: + case PPPIOCSFLAGS: + case PPPIOCGASYNCMAP: + case PPPIOCSASYNCMAP: + case PPPIOCGRASYNCMAP: + case PPPIOCSRASYNCMAP: + case PPPIOCGXASYNCMAP: + case PPPIOCSXASYNCMAP: + case PPPIOCGMRU: + case PPPIOCSMRU: + DEBUG(FS_INFO, "Standard PPP ioctl.\n"); + if(!capable(CAP_NET_ADMIN)) + err = -EPERM; + else { + if (mutex_lock_interruptible(&ap->lock)) + return -EINTR; + + err = ppp_irnet_ioctl(&ap->chan, cmd, arg); + + mutex_unlock(&ap->lock); + } + break; + + /* TTY IOCTLs : Pretend that we are a tty, to keep pppd happy */ + /* Get termios */ + case TCGETS: + DEBUG(FS_INFO, "Get termios.\n"); + if (mutex_lock_interruptible(&ap->lock)) + return -EINTR; + +#ifndef TCGETS2 + if(!kernel_termios_to_user_termios((struct termios __user *)argp, &ap->termios)) + err = 0; +#else + if(kernel_termios_to_user_termios_1((struct termios __user *)argp, &ap->termios)) + err = 0; +#endif + + mutex_unlock(&ap->lock); + break; + /* Set termios */ + case TCSETSF: + DEBUG(FS_INFO, "Set termios.\n"); + if (mutex_lock_interruptible(&ap->lock)) + return -EINTR; + +#ifndef TCGETS2 + if(!user_termios_to_kernel_termios(&ap->termios, (struct termios __user *)argp)) + err = 0; +#else + if(!user_termios_to_kernel_termios_1(&ap->termios, (struct termios __user *)argp)) + err = 0; +#endif + + mutex_unlock(&ap->lock); + break; + + /* Set DTR/RTS */ + case TIOCMBIS: + case TIOCMBIC: + /* Set exclusive/non-exclusive mode */ + case TIOCEXCL: + case TIOCNXCL: + DEBUG(FS_INFO, "TTY compatibility.\n"); + err = 0; + break; + + case TCGETA: + DEBUG(FS_INFO, "TCGETA\n"); + break; + + case TCFLSH: + DEBUG(FS_INFO, "TCFLSH\n"); + /* Note : this will flush buffers in PPP, so it *must* be done + * We should also worry that we don't accept junk here and that + * we get rid of our own buffers */ +#ifdef FLUSH_TO_PPP + if (mutex_lock_interruptible(&ap->lock)) + return -EINTR; + ppp_output_wakeup(&ap->chan); + mutex_unlock(&ap->lock); +#endif /* FLUSH_TO_PPP */ + err = 0; + break; + + case FIONREAD: + DEBUG(FS_INFO, "FIONREAD\n"); + val = 0; + if(put_user(val, (int __user *)argp)) + break; + err = 0; + break; + + default: + DERROR(FS_ERROR, "Unsupported ioctl (0x%X)\n", cmd); + err = -ENOTTY; + } + + DEXIT(FS_TRACE, " - err = 0x%X\n", err); + return err; +} + +/************************** PPP CALLBACKS **************************/ +/* + * This are the functions that the generic PPP driver in the kernel + * will call to communicate to us. + */ + +/*------------------------------------------------------------------*/ +/* + * Prepare the ppp frame for transmission over the IrDA socket. + * We make sure that the header space is enough, and we change ppp header + * according to flags passed by pppd. + * This is not a callback, but just a helper function used in ppp_irnet_send() + */ +static inline struct sk_buff * +irnet_prepare_skb(irnet_socket * ap, + struct sk_buff * skb) +{ + unsigned char * data; + int proto; /* PPP protocol */ + int islcp; /* Protocol == LCP */ + int needaddr; /* Need PPP address */ + + DENTER(PPP_TRACE, "(ap=0x%p, skb=0x%p)\n", + ap, skb); + + /* Extract PPP protocol from the frame */ + data = skb->data; + proto = (data[0] << 8) + data[1]; + + /* LCP packets with codes between 1 (configure-request) + * and 7 (code-reject) must be sent as though no options + * have been negotiated. */ + islcp = (proto == PPP_LCP) && (1 <= data[2]) && (data[2] <= 7); + + /* compress protocol field if option enabled */ + if((data[0] == 0) && (ap->flags & SC_COMP_PROT) && (!islcp)) + skb_pull(skb,1); + + /* Check if we need address/control fields */ + needaddr = 2*((ap->flags & SC_COMP_AC) == 0 || islcp); + + /* Is the skb headroom large enough to contain all IrDA-headers? */ + if((skb_headroom(skb) < (ap->max_header_size + needaddr)) || + (skb_shared(skb))) + { + struct sk_buff * new_skb; + + DEBUG(PPP_INFO, "Reallocating skb\n"); + + /* Create a new skb */ + new_skb = skb_realloc_headroom(skb, ap->max_header_size + needaddr); + + /* We have to free the original skb anyway */ + dev_kfree_skb(skb); + + /* Did the realloc succeed ? */ + DABORT(new_skb == NULL, NULL, PPP_ERROR, "Could not realloc skb\n"); + + /* Use the new skb instead */ + skb = new_skb; + } + + /* prepend address/control fields if necessary */ + if(needaddr) + { + skb_push(skb, 2); + skb->data[0] = PPP_ALLSTATIONS; + skb->data[1] = PPP_UI; + } + + DEXIT(PPP_TRACE, "\n"); + + return skb; +} + +/*------------------------------------------------------------------*/ +/* + * Send a packet to the peer over the IrTTP connection. + * Returns 1 iff the packet was accepted. + * Returns 0 iff packet was not consumed. + * If the packet was not accepted, we will call ppp_output_wakeup + * at some later time to reactivate flow control in ppp_generic. + */ +static int +ppp_irnet_send(struct ppp_channel * chan, + struct sk_buff * skb) +{ + irnet_socket * self = (struct irnet_socket *) chan->private; + int ret; + + DENTER(PPP_TRACE, "(channel=0x%p, ap/self=0x%p)\n", + chan, self); + + /* Check if things are somewhat valid... */ + DASSERT(self != NULL, 0, PPP_ERROR, "Self is NULL !!!\n"); + + /* Check if we are connected */ + if(!(test_bit(0, &self->ttp_open))) + { +#ifdef CONNECT_IN_SEND + /* Let's try to connect one more time... */ + /* Note : we won't be connected after this call, but we should be + * ready for next packet... */ + /* If we are already connecting, this will fail */ + irda_irnet_connect(self); +#endif /* CONNECT_IN_SEND */ + + DEBUG(PPP_INFO, "IrTTP not ready ! (%ld-%ld)\n", + self->ttp_open, self->ttp_connect); + + /* Note : we can either drop the packet or block the packet. + * + * Blocking the packet allow us a better connection time, + * because by calling ppp_output_wakeup() we can have + * ppp_generic resending the LCP request immediately to us, + * rather than waiting for one of pppd periodic transmission of + * LCP request. + * + * On the other hand, if we block all packet, all those periodic + * transmissions of pppd accumulate in ppp_generic, creating a + * backlog of LCP request. When we eventually connect later on, + * we have to transmit all this backlog before we can connect + * proper (if we don't timeout before). + * + * The current strategy is as follow : + * While we are attempting to connect, we block packets to get + * a better connection time. + * If we fail to connect, we drain the queue and start dropping packets + */ +#ifdef BLOCK_WHEN_CONNECT + /* If we are attempting to connect */ + if(test_bit(0, &self->ttp_connect)) + { + /* Blocking packet, ppp_generic will retry later */ + return 0; + } +#endif /* BLOCK_WHEN_CONNECT */ + + /* Dropping packet, pppd will retry later */ + dev_kfree_skb(skb); + return 1; + } + + /* Check if the queue can accept any packet, otherwise block */ + if(self->tx_flow != FLOW_START) + DRETURN(0, PPP_INFO, "IrTTP queue full (%d skbs)...\n", + skb_queue_len(&self->tsap->tx_queue)); + + /* Prepare ppp frame for transmission */ + skb = irnet_prepare_skb(self, skb); + DABORT(skb == NULL, 1, PPP_ERROR, "Prepare skb for Tx failed.\n"); + + /* Send the packet to IrTTP */ + ret = irttp_data_request(self->tsap, skb); + if(ret < 0) + { + /* + * > IrTTPs tx queue is full, so we just have to + * > drop the frame! You might think that we should + * > just return -1 and don't deallocate the frame, + * > but that is dangerous since it's possible that + * > we have replaced the original skb with a new + * > one with larger headroom, and that would really + * > confuse do_dev_queue_xmit() in dev.c! I have + * > tried :-) DB + * Correction : we verify the flow control above (self->tx_flow), + * so we come here only if IrTTP doesn't like the packet (empty, + * too large, IrTTP not connected). In those rare cases, it's ok + * to drop it, we don't want to see it here again... + * Jean II + */ + DERROR(PPP_ERROR, "IrTTP doesn't like this packet !!! (0x%X)\n", ret); + /* irttp_data_request already free the packet */ + } + + DEXIT(PPP_TRACE, "\n"); + return 1; /* Packet has been consumed */ +} + +/*------------------------------------------------------------------*/ +/* + * Take care of the ioctls that ppp_generic doesn't want to deal with... + * Note : we are also called from dev_irnet_ioctl(). + */ +static int +ppp_irnet_ioctl(struct ppp_channel * chan, + unsigned int cmd, + unsigned long arg) +{ + irnet_socket * ap = (struct irnet_socket *) chan->private; + int err; + int val; + u32 accm[8]; + void __user *argp = (void __user *)arg; + + DENTER(PPP_TRACE, "(channel=0x%p, ap=0x%p, cmd=0x%X)\n", + chan, ap, cmd); + + /* Basic checks... */ + DASSERT(ap != NULL, -ENXIO, PPP_ERROR, "ap is NULL...\n"); + + err = -EFAULT; + switch(cmd) + { + /* PPP flags */ + case PPPIOCGFLAGS: + val = ap->flags | ap->rbits; + if(put_user(val, (int __user *) argp)) + break; + err = 0; + break; + case PPPIOCSFLAGS: + if(get_user(val, (int __user *) argp)) + break; + ap->flags = val & ~SC_RCV_BITS; + ap->rbits = val & SC_RCV_BITS; + err = 0; + break; + + /* Async map stuff - all dummy to please pppd */ + case PPPIOCGASYNCMAP: + if(put_user(ap->xaccm[0], (u32 __user *) argp)) + break; + err = 0; + break; + case PPPIOCSASYNCMAP: + if(get_user(ap->xaccm[0], (u32 __user *) argp)) + break; + err = 0; + break; + case PPPIOCGRASYNCMAP: + if(put_user(ap->raccm, (u32 __user *) argp)) + break; + err = 0; + break; + case PPPIOCSRASYNCMAP: + if(get_user(ap->raccm, (u32 __user *) argp)) + break; + err = 0; + break; + case PPPIOCGXASYNCMAP: + if(copy_to_user(argp, ap->xaccm, sizeof(ap->xaccm))) + break; + err = 0; + break; + case PPPIOCSXASYNCMAP: + if(copy_from_user(accm, argp, sizeof(accm))) + break; + accm[2] &= ~0x40000000U; /* can't escape 0x5e */ + accm[3] |= 0x60000000U; /* must escape 0x7d, 0x7e */ + memcpy(ap->xaccm, accm, sizeof(ap->xaccm)); + err = 0; + break; + + /* Max PPP frame size */ + case PPPIOCGMRU: + if(put_user(ap->mru, (int __user *) argp)) + break; + err = 0; + break; + case PPPIOCSMRU: + if(get_user(val, (int __user *) argp)) + break; + if(val < PPP_MRU) + val = PPP_MRU; + ap->mru = val; + err = 0; + break; + + default: + DEBUG(PPP_INFO, "Unsupported ioctl (0x%X)\n", cmd); + err = -ENOIOCTLCMD; + } + + DEXIT(PPP_TRACE, " - err = 0x%X\n", err); + return err; +} + +/************************** INITIALISATION **************************/ +/* + * Module initialisation and all that jazz... + */ + +/*------------------------------------------------------------------*/ +/* + * Hook our device callbacks in the filesystem, to connect our code + * to /dev/irnet + */ +static inline int __init +ppp_irnet_init(void) +{ + int err = 0; + + DENTER(MODULE_TRACE, "()\n"); + + /* Allocate ourselves as a minor in the misc range */ + err = misc_register(&irnet_misc_device); + + DEXIT(MODULE_TRACE, "\n"); + return err; +} + +/*------------------------------------------------------------------*/ +/* + * Cleanup at exit... + */ +static inline void __exit +ppp_irnet_cleanup(void) +{ + DENTER(MODULE_TRACE, "()\n"); + + /* De-allocate /dev/irnet minor in misc range */ + misc_deregister(&irnet_misc_device); + + DEXIT(MODULE_TRACE, "\n"); +} + +/*------------------------------------------------------------------*/ +/* + * Module main entry point + */ +static int __init +irnet_init(void) +{ + int err; + + /* Initialise both parts... */ + err = irda_irnet_init(); + if(!err) + err = ppp_irnet_init(); + return err; +} + +/*------------------------------------------------------------------*/ +/* + * Module exit + */ +static void __exit +irnet_cleanup(void) +{ + irda_irnet_cleanup(); + ppp_irnet_cleanup(); +} + +/*------------------------------------------------------------------*/ +/* + * Module magic + */ +module_init(irnet_init); +module_exit(irnet_cleanup); +MODULE_AUTHOR("Jean Tourrilhes <jt@hpl.hp.com>"); +MODULE_DESCRIPTION("IrNET : Synchronous PPP over IrDA"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV(10, 187); diff --git a/kernel/net/irda/irnet/irnet_ppp.h b/kernel/net/irda/irnet/irnet_ppp.h new file mode 100644 index 000000000..940225866 --- /dev/null +++ b/kernel/net/irda/irnet/irnet_ppp.h @@ -0,0 +1,119 @@ +/* + * IrNET protocol module : Synchronous PPP over an IrDA socket. + * + * Jean II - HPL `00 - <jt@hpl.hp.com> + * + * This file contains all definitions and declarations necessary for the + * PPP part of the IrNET module. + * This file is a private header, so other modules don't want to know + * what's in there... + */ + +#ifndef IRNET_PPP_H +#define IRNET_PPP_H + +/***************************** INCLUDES *****************************/ + +#include "irnet.h" /* Module global include */ + +/************************ CONSTANTS & MACROS ************************/ + +/* /dev/irnet file constants */ +#define IRNET_MAJOR 10 /* Misc range */ +#define IRNET_MINOR 187 /* Official allocation */ + +/* IrNET control channel stuff */ +#define IRNET_MAX_COMMAND 256 /* Max length of a command line */ + +/* PPP hardcore stuff */ + +/* Bits in rbits (PPP flags in irnet struct) */ +#define SC_RCV_BITS (SC_RCV_B7_1|SC_RCV_B7_0|SC_RCV_ODDP|SC_RCV_EVNP) + +/* Bit numbers in busy */ +#define XMIT_BUSY 0 +#define RECV_BUSY 1 +#define XMIT_WAKEUP 2 +#define XMIT_FULL 3 + +/* Queue management */ +#define PPPSYNC_MAX_RQLEN 32 /* arbitrary */ + +/****************************** TYPES ******************************/ + + +/**************************** PROTOTYPES ****************************/ + +/* ----------------------- CONTROL CHANNEL ----------------------- */ +static inline ssize_t + irnet_ctrl_write(irnet_socket *, + const char *, + size_t); +static inline ssize_t + irnet_ctrl_read(irnet_socket *, + struct file *, + char *, + size_t); +static inline unsigned int + irnet_ctrl_poll(irnet_socket *, + struct file *, + poll_table *); +/* ----------------------- CHARACTER DEVICE ----------------------- */ +static int + dev_irnet_open(struct inode *, /* fs callback : open */ + struct file *), + dev_irnet_close(struct inode *, + struct file *); +static ssize_t + dev_irnet_write(struct file *, + const char __user *, + size_t, + loff_t *), + dev_irnet_read(struct file *, + char __user *, + size_t, + loff_t *); +static unsigned int + dev_irnet_poll(struct file *, + poll_table *); +static long + dev_irnet_ioctl(struct file *, + unsigned int, + unsigned long); +/* ------------------------ PPP INTERFACE ------------------------ */ +static inline struct sk_buff * + irnet_prepare_skb(irnet_socket *, + struct sk_buff *); +static int + ppp_irnet_send(struct ppp_channel *, + struct sk_buff *); +static int + ppp_irnet_ioctl(struct ppp_channel *, + unsigned int, + unsigned long); + +/**************************** VARIABLES ****************************/ + +/* Filesystem callbacks (to call us) */ +static const struct file_operations irnet_device_fops = +{ + .owner = THIS_MODULE, + .read = dev_irnet_read, + .write = dev_irnet_write, + .poll = dev_irnet_poll, + .unlocked_ioctl = dev_irnet_ioctl, + .open = dev_irnet_open, + .release = dev_irnet_close, + .llseek = noop_llseek, + /* Also : llseek, readdir, mmap, flush, fsync, fasync, lock, readv, writev */ +}; + +/* Structure so that the misc major (drivers/char/misc.c) take care of us... */ +static struct miscdevice irnet_misc_device = +{ + IRNET_MINOR, + "irnet", + &irnet_device_fops +}; + +#endif /* IRNET_PPP_H */ diff --git a/kernel/net/irda/irnetlink.c b/kernel/net/irda/irnetlink.c new file mode 100644 index 000000000..e15c40e86 --- /dev/null +++ b/kernel/net/irda/irnetlink.c @@ -0,0 +1,158 @@ +/* + * IrDA netlink layer, for stack configuration. + * + * Copyright (c) 2007 Samuel Ortiz <samuel@sortiz.org> + * + * Partly based on the 802.11 nelink implementation + * (see net/wireless/nl80211.c) which is: + * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/socket.h> +#include <linux/irda.h> +#include <linux/gfp.h> +#include <net/net_namespace.h> +#include <net/sock.h> +#include <net/irda/irda.h> +#include <net/irda/irlap.h> +#include <net/genetlink.h> + + + +static struct genl_family irda_nl_family = { + .id = GENL_ID_GENERATE, + .name = IRDA_NL_NAME, + .hdrsize = 0, + .version = IRDA_NL_VERSION, + .maxattr = IRDA_NL_CMD_MAX, +}; + +static struct net_device * ifname_to_netdev(struct net *net, struct genl_info *info) +{ + char * ifname; + + if (!info->attrs[IRDA_NL_ATTR_IFNAME]) + return NULL; + + ifname = nla_data(info->attrs[IRDA_NL_ATTR_IFNAME]); + + pr_debug("%s(): Looking for %s\n", __func__, ifname); + + return dev_get_by_name(net, ifname); +} + +static int irda_nl_set_mode(struct sk_buff *skb, struct genl_info *info) +{ + struct net_device * dev; + struct irlap_cb * irlap; + u32 mode; + + if (!info->attrs[IRDA_NL_ATTR_MODE]) + return -EINVAL; + + mode = nla_get_u32(info->attrs[IRDA_NL_ATTR_MODE]); + + pr_debug("%s(): Switching to mode: %d\n", __func__, mode); + + dev = ifname_to_netdev(&init_net, info); + if (!dev) + return -ENODEV; + + irlap = (struct irlap_cb *)dev->atalk_ptr; + if (!irlap) { + dev_put(dev); + return -ENODEV; + } + + irlap->mode = mode; + + dev_put(dev); + + return 0; +} + +static int irda_nl_get_mode(struct sk_buff *skb, struct genl_info *info) +{ + struct net_device * dev; + struct irlap_cb * irlap; + struct sk_buff *msg; + void *hdr; + int ret = -ENOBUFS; + + dev = ifname_to_netdev(&init_net, info); + if (!dev) + return -ENODEV; + + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (!msg) { + dev_put(dev); + return -ENOMEM; + } + + irlap = (struct irlap_cb *)dev->atalk_ptr; + if (!irlap) { + ret = -ENODEV; + goto err_out; + } + + hdr = genlmsg_put(msg, info->snd_portid, info->snd_seq, + &irda_nl_family, 0, IRDA_NL_CMD_GET_MODE); + if (hdr == NULL) { + ret = -EMSGSIZE; + goto err_out; + } + + if(nla_put_string(msg, IRDA_NL_ATTR_IFNAME, + dev->name)) + goto err_out; + + if(nla_put_u32(msg, IRDA_NL_ATTR_MODE, irlap->mode)) + goto err_out; + + genlmsg_end(msg, hdr); + + return genlmsg_reply(msg, info); + + err_out: + nlmsg_free(msg); + dev_put(dev); + + return ret; +} + +static const struct nla_policy irda_nl_policy[IRDA_NL_ATTR_MAX + 1] = { + [IRDA_NL_ATTR_IFNAME] = { .type = NLA_NUL_STRING, + .len = IFNAMSIZ-1 }, + [IRDA_NL_ATTR_MODE] = { .type = NLA_U32 }, +}; + +static const struct genl_ops irda_nl_ops[] = { + { + .cmd = IRDA_NL_CMD_SET_MODE, + .doit = irda_nl_set_mode, + .policy = irda_nl_policy, + .flags = GENL_ADMIN_PERM, + }, + { + .cmd = IRDA_NL_CMD_GET_MODE, + .doit = irda_nl_get_mode, + .policy = irda_nl_policy, + /* can be retrieved by unprivileged users */ + }, + +}; + +int irda_nl_register(void) +{ + return genl_register_family_with_ops(&irda_nl_family, irda_nl_ops); +} + +void irda_nl_unregister(void) +{ + genl_unregister_family(&irda_nl_family); +} diff --git a/kernel/net/irda/irproc.c b/kernel/net/irda/irproc.c new file mode 100644 index 000000000..b9ac598e2 --- /dev/null +++ b/kernel/net/irda/irproc.c @@ -0,0 +1,97 @@ +/********************************************************************* + * + * Filename: irproc.c + * Version: 1.0 + * Description: Various entries in the /proc file system + * Status: Experimental. + * Author: Thomas Davis, <ratbert@radiks.net> + * Created at: Sat Feb 21 21:33:24 1998 + * Modified at: Sun Nov 14 08:54:54 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1998-1999, Dag Brattli <dagb@cs.uit.no> + * Copyright (c) 1998, Thomas Davis, <ratbert@radiks.net>, + * All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * I, Thomas Davis, provide no warranty for any of this software. + * This material is provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/miscdevice.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/module.h> +#include <linux/init.h> +#include <net/net_namespace.h> + +#include <net/irda/irda.h> +#include <net/irda/irlap.h> +#include <net/irda/irlmp.h> + +extern const struct file_operations discovery_seq_fops; +extern const struct file_operations irlap_seq_fops; +extern const struct file_operations irlmp_seq_fops; +extern const struct file_operations irttp_seq_fops; +extern const struct file_operations irias_seq_fops; + +struct irda_entry { + const char *name; + const struct file_operations *fops; +}; + +struct proc_dir_entry *proc_irda; +EXPORT_SYMBOL(proc_irda); + +static const struct irda_entry irda_dirs[] = { + {"discovery", &discovery_seq_fops}, + {"irttp", &irttp_seq_fops}, + {"irlmp", &irlmp_seq_fops}, + {"irlap", &irlap_seq_fops}, + {"irias", &irias_seq_fops}, +}; + +/* + * Function irda_proc_register (void) + * + * Register irda entry in /proc file system + * + */ +void __init irda_proc_register(void) +{ + int i; + + proc_irda = proc_mkdir("irda", init_net.proc_net); + if (proc_irda == NULL) + return; + + for (i = 0; i < ARRAY_SIZE(irda_dirs); i++) + (void) proc_create(irda_dirs[i].name, 0, proc_irda, + irda_dirs[i].fops); +} + +/* + * Function irda_proc_unregister (void) + * + * Unregister irda entry in /proc file system + * + */ +void irda_proc_unregister(void) +{ + int i; + + if (proc_irda) { + for (i=0; i<ARRAY_SIZE(irda_dirs); i++) + remove_proc_entry(irda_dirs[i].name, proc_irda); + + remove_proc_entry("irda", init_net.proc_net); + proc_irda = NULL; + } +} + + diff --git a/kernel/net/irda/irqueue.c b/kernel/net/irda/irqueue.c new file mode 100644 index 000000000..acbe61c7e --- /dev/null +++ b/kernel/net/irda/irqueue.c @@ -0,0 +1,913 @@ +/********************************************************************* + * + * Filename: irqueue.c + * Version: 0.3 + * Description: General queue implementation + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Tue Jun 9 13:29:31 1998 + * Modified at: Sun Dec 12 13:48:22 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * Modified at: Thu Jan 4 14:29:10 CET 2001 + * Modified by: Marc Zyngier <mzyngier@freesurf.fr> + * + * Copyright (C) 1998-1999, Aage Kvalnes <aage@cs.uit.no> + * Copyright (C) 1998, Dag Brattli, + * All Rights Reserved. + * + * This code is taken from the Vortex Operating System written by Aage + * Kvalnes. Aage has agreed that this code can use the GPL licence, + * although he does not use that licence in his own code. + * + * This copyright does however _not_ include the ELF hash() function + * which I currently don't know which licence or copyright it + * has. Please inform me if you know. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +/* + * NOTE : + * There are various problems with this package : + * o the hash function for ints is pathetic (but could be changed) + * o locking is sometime suspicious (especially during enumeration) + * o most users have only a few elements (== overhead) + * o most users never use search, so don't benefit from hashing + * Problem already fixed : + * o not 64 bit compliant (most users do hashv = (int) self) + * o hashbin_remove() is broken => use hashbin_remove_this() + * I think most users would be better served by a simple linked list + * (like include/linux/list.h) with a global spinlock per list. + * Jean II + */ + +/* + * Notes on the concurrent access to hashbin and other SMP issues + * ------------------------------------------------------------- + * Hashbins are very often in the IrDA stack a global repository of + * information, and therefore used in a very asynchronous manner following + * various events (driver calls, timers, user calls...). + * Therefore, very often it is highly important to consider the + * management of concurrent access to the hashbin and how to guarantee the + * consistency of the operations on it. + * + * First, we need to define the objective of locking : + * 1) Protect user data (content pointed by the hashbin) + * 2) Protect hashbin structure itself (linked list in each bin) + * + * OLD LOCKING + * ----------- + * + * The previous locking strategy, either HB_LOCAL or HB_GLOBAL were + * both inadequate in *both* aspect. + * o HB_GLOBAL was using a spinlock for each bin (local locking). + * o HB_LOCAL was disabling irq on *all* CPUs, so use a single + * global semaphore. + * The problems were : + * A) Global irq disabling is no longer supported by the kernel + * B) No protection for the hashbin struct global data + * o hashbin_delete() + * o hb_current + * C) No protection for user data in some cases + * + * A) HB_LOCAL use global irq disabling, so doesn't work on kernel + * 2.5.X. Even when it is supported (kernel 2.4.X and earlier), its + * performance is not satisfactory on SMP setups. Most hashbins were + * HB_LOCAL, so (A) definitely need fixing. + * B) HB_LOCAL could be modified to fix (B). However, because HB_GLOBAL + * lock only the individual bins, it will never be able to lock the + * global data, so can't do (B). + * C) Some functions return pointer to data that is still in the + * hashbin : + * o hashbin_find() + * o hashbin_get_first() + * o hashbin_get_next() + * As the data is still in the hashbin, it may be changed or free'd + * while the caller is examinimg the data. In those case, locking can't + * be done within the hashbin, but must include use of the data within + * the caller. + * The caller can easily do this with HB_LOCAL (just disable irqs). + * However, this is impossible with HB_GLOBAL because the caller has no + * way to know the proper bin, so don't know which spinlock to use. + * + * Quick summary : can no longer use HB_LOCAL, and HB_GLOBAL is + * fundamentally broken and will never work. + * + * NEW LOCKING + * ----------- + * + * To fix those problems, I've introduce a few changes in the + * hashbin locking : + * 1) New HB_LOCK scheme + * 2) hashbin->hb_spinlock + * 3) New hashbin usage policy + * + * HB_LOCK : + * ------- + * HB_LOCK is a locking scheme intermediate between the old HB_LOCAL + * and HB_GLOBAL. It uses a single spinlock to protect the whole content + * of the hashbin. As it is a single spinlock, it can protect the global + * data of the hashbin and not only the bins themselves. + * HB_LOCK can only protect some of the hashbin calls, so it only lock + * call that can be made 100% safe and leave other call unprotected. + * HB_LOCK in theory is slower than HB_GLOBAL, but as the hashbin + * content is always small contention is not high, so it doesn't matter + * much. HB_LOCK is probably faster than HB_LOCAL. + * + * hashbin->hb_spinlock : + * -------------------- + * The spinlock that HB_LOCK uses is available for caller, so that + * the caller can protect unprotected calls (see below). + * If the caller want to do entirely its own locking (HB_NOLOCK), he + * can do so and may use safely this spinlock. + * Locking is done like this : + * spin_lock_irqsave(&hashbin->hb_spinlock, flags); + * Releasing the lock : + * spin_unlock_irqrestore(&hashbin->hb_spinlock, flags); + * + * Safe & Protected calls : + * ---------------------- + * The following calls are safe or protected via HB_LOCK : + * o hashbin_new() -> safe + * o hashbin_delete() + * o hashbin_insert() + * o hashbin_remove_first() + * o hashbin_remove() + * o hashbin_remove_this() + * o HASHBIN_GET_SIZE() -> atomic + * + * The following calls only protect the hashbin itself : + * o hashbin_lock_find() + * o hashbin_find_next() + * + * Unprotected calls : + * ----------------- + * The following calls need to be protected by the caller : + * o hashbin_find() + * o hashbin_get_first() + * o hashbin_get_next() + * + * Locking Policy : + * -------------- + * If the hashbin is used only in a single thread of execution + * (explicitly or implicitely), you can use HB_NOLOCK + * If the calling module already provide concurrent access protection, + * you may use HB_NOLOCK. + * + * In all other cases, you need to use HB_LOCK and lock the hashbin + * every time before calling one of the unprotected calls. You also must + * use the pointer returned by the unprotected call within the locked + * region. + * + * Extra care for enumeration : + * -------------------------- + * hashbin_get_first() and hashbin_get_next() use the hashbin to + * store the current position, in hb_current. + * As long as the hashbin remains locked, this is safe. If you unlock + * the hashbin, the current position may change if anybody else modify + * or enumerate the hashbin. + * Summary : do the full enumeration while locked. + * + * Alternatively, you may use hashbin_find_next(). But, this will + * be slower, is more complex to use and doesn't protect the hashbin + * content. So, care is needed here as well. + * + * Other issues : + * ------------ + * I believe that we are overdoing it by using spin_lock_irqsave() + * and we should use only spin_lock_bh() or similar. But, I don't have + * the balls to try it out. + * Don't believe that because hashbin are now (somewhat) SMP safe + * that the rest of the code is. Higher layers tend to be safest, + * but LAP and LMP would need some serious dedicated love. + * + * Jean II + */ +#include <linux/module.h> +#include <linux/slab.h> + +#include <net/irda/irda.h> +#include <net/irda/irqueue.h> + +/************************ QUEUE SUBROUTINES ************************/ + +/* + * Hashbin + */ +#define GET_HASHBIN(x) ( x & HASHBIN_MASK ) + +/* + * Function hash (name) + * + * This function hash the input string 'name' using the ELF hash + * function for strings. + */ +static __u32 hash( const char* name) +{ + __u32 h = 0; + __u32 g; + + while(*name) { + h = (h<<4) + *name++; + if ((g = (h & 0xf0000000))) + h ^=g>>24; + h &=~g; + } + return h; +} + +/* + * Function enqueue_first (queue, proc) + * + * Insert item first in queue. + * + */ +static void enqueue_first(irda_queue_t **queue, irda_queue_t* element) +{ + + /* + * Check if queue is empty. + */ + if ( *queue == NULL ) { + /* + * Queue is empty. Insert one element into the queue. + */ + element->q_next = element->q_prev = *queue = element; + + } else { + /* + * Queue is not empty. Insert element into front of queue. + */ + element->q_next = (*queue); + (*queue)->q_prev->q_next = element; + element->q_prev = (*queue)->q_prev; + (*queue)->q_prev = element; + (*queue) = element; + } +} + + +/* + * Function dequeue (queue) + * + * Remove first entry in queue + * + */ +static irda_queue_t *dequeue_first(irda_queue_t **queue) +{ + irda_queue_t *ret; + + pr_debug("dequeue_first()\n"); + + /* + * Set return value + */ + ret = *queue; + + if ( *queue == NULL ) { + /* + * Queue was empty. + */ + } else if ( (*queue)->q_next == *queue ) { + /* + * Queue only contained a single element. It will now be + * empty. + */ + *queue = NULL; + } else { + /* + * Queue contained several element. Remove the first one. + */ + (*queue)->q_prev->q_next = (*queue)->q_next; + (*queue)->q_next->q_prev = (*queue)->q_prev; + *queue = (*queue)->q_next; + } + + /* + * Return the removed entry (or NULL of queue was empty). + */ + return ret; +} + +/* + * Function dequeue_general (queue, element) + * + * + */ +static irda_queue_t *dequeue_general(irda_queue_t **queue, irda_queue_t* element) +{ + irda_queue_t *ret; + + pr_debug("dequeue_general()\n"); + + /* + * Set return value + */ + ret = *queue; + + if ( *queue == NULL ) { + /* + * Queue was empty. + */ + } else if ( (*queue)->q_next == *queue ) { + /* + * Queue only contained a single element. It will now be + * empty. + */ + *queue = NULL; + + } else { + /* + * Remove specific element. + */ + element->q_prev->q_next = element->q_next; + element->q_next->q_prev = element->q_prev; + if ( (*queue) == element) + (*queue) = element->q_next; + } + + /* + * Return the removed entry (or NULL of queue was empty). + */ + return ret; +} + +/************************ HASHBIN MANAGEMENT ************************/ + +/* + * Function hashbin_create ( type, name ) + * + * Create hashbin! + * + */ +hashbin_t *hashbin_new(int type) +{ + hashbin_t* hashbin; + + /* + * Allocate new hashbin + */ + hashbin = kzalloc(sizeof(*hashbin), GFP_ATOMIC); + if (!hashbin) + return NULL; + + /* + * Initialize structure + */ + hashbin->hb_type = type; + hashbin->magic = HB_MAGIC; + //hashbin->hb_current = NULL; + + /* Make sure all spinlock's are unlocked */ + if ( hashbin->hb_type & HB_LOCK ) { + spin_lock_init(&hashbin->hb_spinlock); + } + + return hashbin; +} +EXPORT_SYMBOL(hashbin_new); + + +/* + * Function hashbin_delete (hashbin, free_func) + * + * Destroy hashbin, the free_func can be a user supplied special routine + * for deallocating this structure if it's complex. If not the user can + * just supply kfree, which should take care of the job. + */ +#ifdef CONFIG_LOCKDEP +static int hashbin_lock_depth = 0; +#endif +int hashbin_delete( hashbin_t* hashbin, FREE_FUNC free_func) +{ + irda_queue_t* queue; + unsigned long flags = 0; + int i; + + IRDA_ASSERT(hashbin != NULL, return -1;); + IRDA_ASSERT(hashbin->magic == HB_MAGIC, return -1;); + + /* Synchronize */ + if ( hashbin->hb_type & HB_LOCK ) { + spin_lock_irqsave_nested(&hashbin->hb_spinlock, flags, + hashbin_lock_depth++); + } + + /* + * Free the entries in the hashbin, TODO: use hashbin_clear when + * it has been shown to work + */ + for (i = 0; i < HASHBIN_SIZE; i ++ ) { + queue = dequeue_first((irda_queue_t**) &hashbin->hb_queue[i]); + while (queue ) { + if (free_func) + (*free_func)(queue); + queue = dequeue_first( + (irda_queue_t**) &hashbin->hb_queue[i]); + } + } + + /* Cleanup local data */ + hashbin->hb_current = NULL; + hashbin->magic = ~HB_MAGIC; + + /* Release lock */ + if ( hashbin->hb_type & HB_LOCK) { + spin_unlock_irqrestore(&hashbin->hb_spinlock, flags); +#ifdef CONFIG_LOCKDEP + hashbin_lock_depth--; +#endif + } + + /* + * Free the hashbin structure + */ + kfree(hashbin); + + return 0; +} +EXPORT_SYMBOL(hashbin_delete); + +/********************* HASHBIN LIST OPERATIONS *********************/ + +/* + * Function hashbin_insert (hashbin, entry, name) + * + * Insert an entry into the hashbin + * + */ +void hashbin_insert(hashbin_t* hashbin, irda_queue_t* entry, long hashv, + const char* name) +{ + unsigned long flags = 0; + int bin; + + IRDA_ASSERT( hashbin != NULL, return;); + IRDA_ASSERT( hashbin->magic == HB_MAGIC, return;); + + /* + * Locate hashbin + */ + if ( name ) + hashv = hash( name ); + bin = GET_HASHBIN( hashv ); + + /* Synchronize */ + if ( hashbin->hb_type & HB_LOCK ) { + spin_lock_irqsave(&hashbin->hb_spinlock, flags); + } /* Default is no-lock */ + + /* + * Store name and key + */ + entry->q_hash = hashv; + if ( name ) + strlcpy( entry->q_name, name, sizeof(entry->q_name)); + + /* + * Insert new entry first + */ + enqueue_first( (irda_queue_t**) &hashbin->hb_queue[ bin ], + entry); + hashbin->hb_size++; + + /* Release lock */ + if ( hashbin->hb_type & HB_LOCK ) { + spin_unlock_irqrestore(&hashbin->hb_spinlock, flags); + } /* Default is no-lock */ +} +EXPORT_SYMBOL(hashbin_insert); + +/* + * Function hashbin_remove_first (hashbin) + * + * Remove first entry of the hashbin + * + * Note : this function no longer use hashbin_remove(), but does things + * similar to hashbin_remove_this(), so can be considered safe. + * Jean II + */ +void *hashbin_remove_first( hashbin_t *hashbin) +{ + unsigned long flags = 0; + irda_queue_t *entry = NULL; + + /* Synchronize */ + if ( hashbin->hb_type & HB_LOCK ) { + spin_lock_irqsave(&hashbin->hb_spinlock, flags); + } /* Default is no-lock */ + + entry = hashbin_get_first( hashbin); + if ( entry != NULL) { + int bin; + long hashv; + /* + * Locate hashbin + */ + hashv = entry->q_hash; + bin = GET_HASHBIN( hashv ); + + /* + * Dequeue the entry... + */ + dequeue_general( (irda_queue_t**) &hashbin->hb_queue[ bin ], + entry); + hashbin->hb_size--; + entry->q_next = NULL; + entry->q_prev = NULL; + + /* + * Check if this item is the currently selected item, and in + * that case we must reset hb_current + */ + if ( entry == hashbin->hb_current) + hashbin->hb_current = NULL; + } + + /* Release lock */ + if ( hashbin->hb_type & HB_LOCK ) { + spin_unlock_irqrestore(&hashbin->hb_spinlock, flags); + } /* Default is no-lock */ + + return entry; +} + + +/* + * Function hashbin_remove (hashbin, hashv, name) + * + * Remove entry with the given name + * + * The use of this function is highly discouraged, because the whole + * concept behind hashbin_remove() is broken. In many cases, it's not + * possible to guarantee the unicity of the index (either hashv or name), + * leading to removing the WRONG entry. + * The only simple safe use is : + * hashbin_remove(hasbin, (int) self, NULL); + * In other case, you must think hard to guarantee unicity of the index. + * Jean II + */ +void* hashbin_remove( hashbin_t* hashbin, long hashv, const char* name) +{ + int bin, found = FALSE; + unsigned long flags = 0; + irda_queue_t* entry; + + IRDA_ASSERT( hashbin != NULL, return NULL;); + IRDA_ASSERT( hashbin->magic == HB_MAGIC, return NULL;); + + /* + * Locate hashbin + */ + if ( name ) + hashv = hash( name ); + bin = GET_HASHBIN( hashv ); + + /* Synchronize */ + if ( hashbin->hb_type & HB_LOCK ) { + spin_lock_irqsave(&hashbin->hb_spinlock, flags); + } /* Default is no-lock */ + + /* + * Search for entry + */ + entry = hashbin->hb_queue[ bin ]; + if ( entry ) { + do { + /* + * Check for key + */ + if ( entry->q_hash == hashv ) { + /* + * Name compare too? + */ + if ( name ) { + if ( strcmp( entry->q_name, name) == 0) + { + found = TRUE; + break; + } + } else { + found = TRUE; + break; + } + } + entry = entry->q_next; + } while ( entry != hashbin->hb_queue[ bin ] ); + } + + /* + * If entry was found, dequeue it + */ + if ( found ) { + dequeue_general( (irda_queue_t**) &hashbin->hb_queue[ bin ], + entry); + hashbin->hb_size--; + + /* + * Check if this item is the currently selected item, and in + * that case we must reset hb_current + */ + if ( entry == hashbin->hb_current) + hashbin->hb_current = NULL; + } + + /* Release lock */ + if ( hashbin->hb_type & HB_LOCK ) { + spin_unlock_irqrestore(&hashbin->hb_spinlock, flags); + } /* Default is no-lock */ + + + /* Return */ + if ( found ) + return entry; + else + return NULL; + +} +EXPORT_SYMBOL(hashbin_remove); + +/* + * Function hashbin_remove_this (hashbin, entry) + * + * Remove entry with the given name + * + * In some cases, the user of hashbin can't guarantee the unicity + * of either the hashv or name. + * In those cases, using the above function is guaranteed to cause troubles, + * so we use this one instead... + * And by the way, it's also faster, because we skip the search phase ;-) + */ +void* hashbin_remove_this( hashbin_t* hashbin, irda_queue_t* entry) +{ + unsigned long flags = 0; + int bin; + long hashv; + + IRDA_ASSERT( hashbin != NULL, return NULL;); + IRDA_ASSERT( hashbin->magic == HB_MAGIC, return NULL;); + IRDA_ASSERT( entry != NULL, return NULL;); + + /* Synchronize */ + if ( hashbin->hb_type & HB_LOCK ) { + spin_lock_irqsave(&hashbin->hb_spinlock, flags); + } /* Default is no-lock */ + + /* Check if valid and not already removed... */ + if((entry->q_next == NULL) || (entry->q_prev == NULL)) { + entry = NULL; + goto out; + } + + /* + * Locate hashbin + */ + hashv = entry->q_hash; + bin = GET_HASHBIN( hashv ); + + /* + * Dequeue the entry... + */ + dequeue_general( (irda_queue_t**) &hashbin->hb_queue[ bin ], + entry); + hashbin->hb_size--; + entry->q_next = NULL; + entry->q_prev = NULL; + + /* + * Check if this item is the currently selected item, and in + * that case we must reset hb_current + */ + if ( entry == hashbin->hb_current) + hashbin->hb_current = NULL; +out: + /* Release lock */ + if ( hashbin->hb_type & HB_LOCK ) { + spin_unlock_irqrestore(&hashbin->hb_spinlock, flags); + } /* Default is no-lock */ + + return entry; +} +EXPORT_SYMBOL(hashbin_remove_this); + +/*********************** HASHBIN ENUMERATION ***********************/ + +/* + * Function hashbin_common_find (hashbin, hashv, name) + * + * Find item with the given hashv or name + * + */ +void* hashbin_find( hashbin_t* hashbin, long hashv, const char* name ) +{ + int bin; + irda_queue_t* entry; + + pr_debug("hashbin_find()\n"); + + IRDA_ASSERT( hashbin != NULL, return NULL;); + IRDA_ASSERT( hashbin->magic == HB_MAGIC, return NULL;); + + /* + * Locate hashbin + */ + if ( name ) + hashv = hash( name ); + bin = GET_HASHBIN( hashv ); + + /* + * Search for entry + */ + entry = hashbin->hb_queue[ bin]; + if ( entry ) { + do { + /* + * Check for key + */ + if ( entry->q_hash == hashv ) { + /* + * Name compare too? + */ + if ( name ) { + if ( strcmp( entry->q_name, name ) == 0 ) { + return entry; + } + } else { + return entry; + } + } + entry = entry->q_next; + } while ( entry != hashbin->hb_queue[ bin ] ); + } + + return NULL; +} +EXPORT_SYMBOL(hashbin_find); + +/* + * Function hashbin_lock_find (hashbin, hashv, name) + * + * Find item with the given hashv or name + * + * Same, but with spinlock protection... + * I call it safe, but it's only safe with respect to the hashbin, not its + * content. - Jean II + */ +void* hashbin_lock_find( hashbin_t* hashbin, long hashv, const char* name ) +{ + unsigned long flags = 0; + irda_queue_t* entry; + + /* Synchronize */ + spin_lock_irqsave(&hashbin->hb_spinlock, flags); + + /* + * Search for entry + */ + entry = hashbin_find(hashbin, hashv, name); + + /* Release lock */ + spin_unlock_irqrestore(&hashbin->hb_spinlock, flags); + + return entry; +} +EXPORT_SYMBOL(hashbin_lock_find); + +/* + * Function hashbin_find (hashbin, hashv, name, pnext) + * + * Find an item with the given hashv or name, and its successor + * + * This function allow to do concurrent enumerations without the + * need to lock over the whole session, because the caller keep the + * context of the search. On the other hand, it might fail and return + * NULL if the entry is removed. - Jean II + */ +void* hashbin_find_next( hashbin_t* hashbin, long hashv, const char* name, + void ** pnext) +{ + unsigned long flags = 0; + irda_queue_t* entry; + + /* Synchronize */ + spin_lock_irqsave(&hashbin->hb_spinlock, flags); + + /* + * Search for current entry + * This allow to check if the current item is still in the + * hashbin or has been removed. + */ + entry = hashbin_find(hashbin, hashv, name); + + /* + * Trick hashbin_get_next() to return what we want + */ + if(entry) { + hashbin->hb_current = entry; + *pnext = hashbin_get_next( hashbin ); + } else + *pnext = NULL; + + /* Release lock */ + spin_unlock_irqrestore(&hashbin->hb_spinlock, flags); + + return entry; +} + +/* + * Function hashbin_get_first (hashbin) + * + * Get a pointer to first element in hashbin, this function must be + * called before any calls to hashbin_get_next()! + * + */ +irda_queue_t *hashbin_get_first( hashbin_t* hashbin) +{ + irda_queue_t *entry; + int i; + + IRDA_ASSERT( hashbin != NULL, return NULL;); + IRDA_ASSERT( hashbin->magic == HB_MAGIC, return NULL;); + + if ( hashbin == NULL) + return NULL; + + for ( i = 0; i < HASHBIN_SIZE; i ++ ) { + entry = hashbin->hb_queue[ i]; + if ( entry) { + hashbin->hb_current = entry; + return entry; + } + } + /* + * Did not find any item in hashbin + */ + return NULL; +} +EXPORT_SYMBOL(hashbin_get_first); + +/* + * Function hashbin_get_next (hashbin) + * + * Get next item in hashbin. A series of hashbin_get_next() calls must + * be started by a call to hashbin_get_first(). The function returns + * NULL when all items have been traversed + * + * The context of the search is stored within the hashbin, so you must + * protect yourself from concurrent enumerations. - Jean II + */ +irda_queue_t *hashbin_get_next( hashbin_t *hashbin) +{ + irda_queue_t* entry; + int bin; + int i; + + IRDA_ASSERT( hashbin != NULL, return NULL;); + IRDA_ASSERT( hashbin->magic == HB_MAGIC, return NULL;); + + if ( hashbin->hb_current == NULL) { + IRDA_ASSERT( hashbin->hb_current != NULL, return NULL;); + return NULL; + } + entry = hashbin->hb_current->q_next; + bin = GET_HASHBIN( entry->q_hash); + + /* + * Make sure that we are not back at the beginning of the queue + * again + */ + if ( entry != hashbin->hb_queue[ bin ]) { + hashbin->hb_current = entry; + + return entry; + } + + /* + * Check that this is not the last queue in hashbin + */ + if ( bin >= HASHBIN_SIZE) + return NULL; + + /* + * Move to next queue in hashbin + */ + bin++; + for ( i = bin; i < HASHBIN_SIZE; i++ ) { + entry = hashbin->hb_queue[ i]; + if ( entry) { + hashbin->hb_current = entry; + + return entry; + } + } + return NULL; +} +EXPORT_SYMBOL(hashbin_get_next); diff --git a/kernel/net/irda/irsysctl.c b/kernel/net/irda/irsysctl.c new file mode 100644 index 000000000..873da5e7d --- /dev/null +++ b/kernel/net/irda/irsysctl.c @@ -0,0 +1,258 @@ +/********************************************************************* + * + * Filename: irsysctl.c + * Version: 1.0 + * Description: Sysctl interface for IrDA + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Sun May 24 22:12:06 1998 + * Modified at: Fri Jun 4 02:50:15 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1997, 1999 Dag Brattli, All Rights Reserved. + * Copyright (c) 2000-2001 Jean Tourrilhes <jt@hpl.hp.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/mm.h> +#include <linux/ctype.h> +#include <linux/sysctl.h> +#include <linux/init.h> + +#include <net/irda/irda.h> /* irda_debug */ +#include <net/irda/irlmp.h> +#include <net/irda/timer.h> +#include <net/irda/irias_object.h> + +extern int sysctl_discovery; +extern int sysctl_discovery_slots; +extern int sysctl_discovery_timeout; +extern int sysctl_slot_timeout; +extern int sysctl_fast_poll_increase; +extern char sysctl_devname[]; +extern int sysctl_max_baud_rate; +extern unsigned int sysctl_min_tx_turn_time; +extern unsigned int sysctl_max_tx_data_size; +extern unsigned int sysctl_max_tx_window; +extern int sysctl_max_noreply_time; +extern int sysctl_warn_noreply_time; +extern int sysctl_lap_keepalive_time; + +extern struct irlmp_cb *irlmp; + +/* this is needed for the proc_dointvec_minmax - Jean II */ +static int max_discovery_slots = 16; /* ??? */ +static int min_discovery_slots = 1; +/* IrLAP 6.13.2 says 25ms to 10+70ms - allow higher since some devices + * seems to require it. (from Dag's comment) */ +static int max_slot_timeout = 160; +static int min_slot_timeout = 20; +static int max_max_baud_rate = 16000000; /* See qos.c - IrLAP spec */ +static int min_max_baud_rate = 2400; +static int max_min_tx_turn_time = 10000; /* See qos.c - IrLAP spec */ +static int min_min_tx_turn_time; +static int max_max_tx_data_size = 2048; /* See qos.c - IrLAP spec */ +static int min_max_tx_data_size = 64; +static int max_max_tx_window = 7; /* See qos.c - IrLAP spec */ +static int min_max_tx_window = 1; +static int max_max_noreply_time = 40; /* See qos.c - IrLAP spec */ +static int min_max_noreply_time = 3; +static int max_warn_noreply_time = 3; /* 3s == standard */ +static int min_warn_noreply_time = 1; /* 1s == min WD_TIMER */ +static int max_lap_keepalive_time = 10000; /* 10s */ +static int min_lap_keepalive_time = 100; /* 100us */ +/* For other sysctl, I've no idea of the range. Maybe Dag could help + * us on that - Jean II */ + +static int do_devname(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + int ret; + + ret = proc_dostring(table, write, buffer, lenp, ppos); + if (ret == 0 && write) { + struct ias_value *val; + + val = irias_new_string_value(sysctl_devname); + if (val) + irias_object_change_attribute("Device", "DeviceName", val); + } + return ret; +} + + +static int do_discovery(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + int ret; + + ret = proc_dointvec(table, write, buffer, lenp, ppos); + if (ret) + return ret; + + if (irlmp == NULL) + return -ENODEV; + + if (sysctl_discovery) + irlmp_start_discovery_timer(irlmp, sysctl_discovery_timeout*HZ); + else + del_timer_sync(&irlmp->discovery_timer); + + return ret; +} + +/* One file */ +static struct ctl_table irda_table[] = { + { + .procname = "discovery", + .data = &sysctl_discovery, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = do_discovery, + }, + { + .procname = "devname", + .data = sysctl_devname, + .maxlen = 65, + .mode = 0644, + .proc_handler = do_devname, + }, +#ifdef CONFIG_IRDA_FAST_RR + { + .procname = "fast_poll_increase", + .data = &sysctl_fast_poll_increase, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec + }, +#endif + { + .procname = "discovery_slots", + .data = &sysctl_discovery_slots, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_minmax, + .extra1 = &min_discovery_slots, + .extra2 = &max_discovery_slots + }, + { + .procname = "discovery_timeout", + .data = &sysctl_discovery_timeout, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec + }, + { + .procname = "slot_timeout", + .data = &sysctl_slot_timeout, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_minmax, + .extra1 = &min_slot_timeout, + .extra2 = &max_slot_timeout + }, + { + .procname = "max_baud_rate", + .data = &sysctl_max_baud_rate, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_minmax, + .extra1 = &min_max_baud_rate, + .extra2 = &max_max_baud_rate + }, + { + .procname = "min_tx_turn_time", + .data = &sysctl_min_tx_turn_time, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_minmax, + .extra1 = &min_min_tx_turn_time, + .extra2 = &max_min_tx_turn_time + }, + { + .procname = "max_tx_data_size", + .data = &sysctl_max_tx_data_size, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_minmax, + .extra1 = &min_max_tx_data_size, + .extra2 = &max_max_tx_data_size + }, + { + .procname = "max_tx_window", + .data = &sysctl_max_tx_window, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_minmax, + .extra1 = &min_max_tx_window, + .extra2 = &max_max_tx_window + }, + { + .procname = "max_noreply_time", + .data = &sysctl_max_noreply_time, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_minmax, + .extra1 = &min_max_noreply_time, + .extra2 = &max_max_noreply_time + }, + { + .procname = "warn_noreply_time", + .data = &sysctl_warn_noreply_time, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_minmax, + .extra1 = &min_warn_noreply_time, + .extra2 = &max_warn_noreply_time + }, + { + .procname = "lap_keepalive_time", + .data = &sysctl_lap_keepalive_time, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_minmax, + .extra1 = &min_lap_keepalive_time, + .extra2 = &max_lap_keepalive_time + }, + { } +}; + +static struct ctl_table_header *irda_table_header; + +/* + * Function irda_sysctl_register (void) + * + * Register our sysctl interface + * + */ +int __init irda_sysctl_register(void) +{ + irda_table_header = register_net_sysctl(&init_net, "net/irda", irda_table); + if (!irda_table_header) + return -ENOMEM; + + return 0; +} + +/* + * Function irda_sysctl_unregister (void) + * + * Unregister our sysctl interface + * + */ +void irda_sysctl_unregister(void) +{ + unregister_net_sysctl_table(irda_table_header); +} + + + diff --git a/kernel/net/irda/irttp.c b/kernel/net/irda/irttp.c new file mode 100644 index 000000000..b6ab41d5b --- /dev/null +++ b/kernel/net/irda/irttp.c @@ -0,0 +1,1891 @@ +/********************************************************************* + * + * Filename: irttp.c + * Version: 1.2 + * Description: Tiny Transport Protocol (TTP) implementation + * Status: Stable + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Sun Aug 31 20:14:31 1997 + * Modified at: Wed Jan 5 11:31:27 2000 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>, + * All Rights Reserved. + * Copyright (c) 2000-2003 Jean Tourrilhes <jt@hpl.hp.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/skbuff.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/export.h> + +#include <asm/byteorder.h> +#include <asm/unaligned.h> + +#include <net/irda/irda.h> +#include <net/irda/irlap.h> +#include <net/irda/irlmp.h> +#include <net/irda/parameters.h> +#include <net/irda/irttp.h> + +static struct irttp_cb *irttp; + +static void __irttp_close_tsap(struct tsap_cb *self); + +static int irttp_data_indication(void *instance, void *sap, + struct sk_buff *skb); +static int irttp_udata_indication(void *instance, void *sap, + struct sk_buff *skb); +static void irttp_disconnect_indication(void *instance, void *sap, + LM_REASON reason, struct sk_buff *); +static void irttp_connect_indication(void *instance, void *sap, + struct qos_info *qos, __u32 max_sdu_size, + __u8 header_size, struct sk_buff *skb); +static void irttp_connect_confirm(void *instance, void *sap, + struct qos_info *qos, __u32 max_sdu_size, + __u8 header_size, struct sk_buff *skb); +static void irttp_run_tx_queue(struct tsap_cb *self); +static void irttp_run_rx_queue(struct tsap_cb *self); + +static void irttp_flush_queues(struct tsap_cb *self); +static void irttp_fragment_skb(struct tsap_cb *self, struct sk_buff *skb); +static struct sk_buff *irttp_reassemble_skb(struct tsap_cb *self); +static void irttp_todo_expired(unsigned long data); +static int irttp_param_max_sdu_size(void *instance, irda_param_t *param, + int get); + +static void irttp_flow_indication(void *instance, void *sap, LOCAL_FLOW flow); +static void irttp_status_indication(void *instance, + LINK_STATUS link, LOCK_STATUS lock); + +/* Information for parsing parameters in IrTTP */ +static const pi_minor_info_t pi_minor_call_table[] = { + { NULL, 0 }, /* 0x00 */ + { irttp_param_max_sdu_size, PV_INTEGER | PV_BIG_ENDIAN } /* 0x01 */ +}; +static const pi_major_info_t pi_major_call_table[] = { + { pi_minor_call_table, 2 } +}; +static pi_param_info_t param_info = { pi_major_call_table, 1, 0x0f, 4 }; + +/************************ GLOBAL PROCEDURES ************************/ + +/* + * Function irttp_init (void) + * + * Initialize the IrTTP layer. Called by module initialization code + * + */ +int __init irttp_init(void) +{ + irttp = kzalloc(sizeof(struct irttp_cb), GFP_KERNEL); + if (irttp == NULL) + return -ENOMEM; + + irttp->magic = TTP_MAGIC; + + irttp->tsaps = hashbin_new(HB_LOCK); + if (!irttp->tsaps) { + net_err_ratelimited("%s: can't allocate IrTTP hashbin!\n", + __func__); + kfree(irttp); + return -ENOMEM; + } + + return 0; +} + +/* + * Function irttp_cleanup (void) + * + * Called by module destruction/cleanup code + * + */ +void irttp_cleanup(void) +{ + /* Check for main structure */ + IRDA_ASSERT(irttp->magic == TTP_MAGIC, return;); + + /* + * Delete hashbin and close all TSAP instances in it + */ + hashbin_delete(irttp->tsaps, (FREE_FUNC) __irttp_close_tsap); + + irttp->magic = 0; + + /* De-allocate main structure */ + kfree(irttp); + + irttp = NULL; +} + +/*************************** SUBROUTINES ***************************/ + +/* + * Function irttp_start_todo_timer (self, timeout) + * + * Start todo timer. + * + * Made it more effient and unsensitive to race conditions - Jean II + */ +static inline void irttp_start_todo_timer(struct tsap_cb *self, int timeout) +{ + /* Set new value for timer */ + mod_timer(&self->todo_timer, jiffies + timeout); +} + +/* + * Function irttp_todo_expired (data) + * + * Todo timer has expired! + * + * One of the restriction of the timer is that it is run only on the timer + * interrupt which run every 10ms. This mean that even if you set the timer + * with a delay of 0, it may take up to 10ms before it's run. + * So, to minimise latency and keep cache fresh, we try to avoid using + * it as much as possible. + * Note : we can't use tasklets, because they can't be asynchronously + * killed (need user context), and we can't guarantee that here... + * Jean II + */ +static void irttp_todo_expired(unsigned long data) +{ + struct tsap_cb *self = (struct tsap_cb *) data; + + /* Check that we still exist */ + if (!self || self->magic != TTP_TSAP_MAGIC) + return; + + pr_debug("%s(instance=%p)\n", __func__, self); + + /* Try to make some progress, especially on Tx side - Jean II */ + irttp_run_rx_queue(self); + irttp_run_tx_queue(self); + + /* Check if time for disconnect */ + if (test_bit(0, &self->disconnect_pend)) { + /* Check if it's possible to disconnect yet */ + if (skb_queue_empty(&self->tx_queue)) { + /* Make sure disconnect is not pending anymore */ + clear_bit(0, &self->disconnect_pend); /* FALSE */ + + /* Note : self->disconnect_skb may be NULL */ + irttp_disconnect_request(self, self->disconnect_skb, + P_NORMAL); + self->disconnect_skb = NULL; + } else { + /* Try again later */ + irttp_start_todo_timer(self, HZ/10); + + /* No reason to try and close now */ + return; + } + } + + /* Check if it's closing time */ + if (self->close_pend) + /* Finish cleanup */ + irttp_close_tsap(self); +} + +/* + * Function irttp_flush_queues (self) + * + * Flushes (removes all frames) in transitt-buffer (tx_list) + */ +static void irttp_flush_queues(struct tsap_cb *self) +{ + struct sk_buff *skb; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;); + + /* Deallocate frames waiting to be sent */ + while ((skb = skb_dequeue(&self->tx_queue)) != NULL) + dev_kfree_skb(skb); + + /* Deallocate received frames */ + while ((skb = skb_dequeue(&self->rx_queue)) != NULL) + dev_kfree_skb(skb); + + /* Deallocate received fragments */ + while ((skb = skb_dequeue(&self->rx_fragments)) != NULL) + dev_kfree_skb(skb); +} + +/* + * Function irttp_reassemble (self) + * + * Makes a new (continuous) skb of all the fragments in the fragment + * queue + * + */ +static struct sk_buff *irttp_reassemble_skb(struct tsap_cb *self) +{ + struct sk_buff *skb, *frag; + int n = 0; /* Fragment index */ + + IRDA_ASSERT(self != NULL, return NULL;); + IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return NULL;); + + pr_debug("%s(), self->rx_sdu_size=%d\n", __func__, + self->rx_sdu_size); + + skb = dev_alloc_skb(TTP_HEADER + self->rx_sdu_size); + if (!skb) + return NULL; + + /* + * Need to reserve space for TTP header in case this skb needs to + * be requeued in case delivery failes + */ + skb_reserve(skb, TTP_HEADER); + skb_put(skb, self->rx_sdu_size); + + /* + * Copy all fragments to a new buffer + */ + while ((frag = skb_dequeue(&self->rx_fragments)) != NULL) { + skb_copy_to_linear_data_offset(skb, n, frag->data, frag->len); + n += frag->len; + + dev_kfree_skb(frag); + } + + pr_debug("%s(), frame len=%d, rx_sdu_size=%d, rx_max_sdu_size=%d\n", + __func__, n, self->rx_sdu_size, self->rx_max_sdu_size); + /* Note : irttp_run_rx_queue() calculate self->rx_sdu_size + * by summing the size of all fragments, so we should always + * have n == self->rx_sdu_size, except in cases where we + * droped the last fragment (when self->rx_sdu_size exceed + * self->rx_max_sdu_size), where n < self->rx_sdu_size. + * Jean II */ + IRDA_ASSERT(n <= self->rx_sdu_size, n = self->rx_sdu_size;); + + /* Set the new length */ + skb_trim(skb, n); + + self->rx_sdu_size = 0; + + return skb; +} + +/* + * Function irttp_fragment_skb (skb) + * + * Fragments a frame and queues all the fragments for transmission + * + */ +static inline void irttp_fragment_skb(struct tsap_cb *self, + struct sk_buff *skb) +{ + struct sk_buff *frag; + __u8 *frame; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;); + IRDA_ASSERT(skb != NULL, return;); + + /* + * Split frame into a number of segments + */ + while (skb->len > self->max_seg_size) { + pr_debug("%s(), fragmenting ...\n", __func__); + + /* Make new segment */ + frag = alloc_skb(self->max_seg_size+self->max_header_size, + GFP_ATOMIC); + if (!frag) + return; + + skb_reserve(frag, self->max_header_size); + + /* Copy data from the original skb into this fragment. */ + skb_copy_from_linear_data(skb, skb_put(frag, self->max_seg_size), + self->max_seg_size); + + /* Insert TTP header, with the more bit set */ + frame = skb_push(frag, TTP_HEADER); + frame[0] = TTP_MORE; + + /* Hide the copied data from the original skb */ + skb_pull(skb, self->max_seg_size); + + /* Queue fragment */ + skb_queue_tail(&self->tx_queue, frag); + } + /* Queue what is left of the original skb */ + pr_debug("%s(), queuing last segment\n", __func__); + + frame = skb_push(skb, TTP_HEADER); + frame[0] = 0x00; /* Clear more bit */ + + /* Queue fragment */ + skb_queue_tail(&self->tx_queue, skb); +} + +/* + * Function irttp_param_max_sdu_size (self, param) + * + * Handle the MaxSduSize parameter in the connect frames, this function + * will be called both when this parameter needs to be inserted into, and + * extracted from the connect frames + */ +static int irttp_param_max_sdu_size(void *instance, irda_param_t *param, + int get) +{ + struct tsap_cb *self; + + self = instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;); + + if (get) + param->pv.i = self->tx_max_sdu_size; + else + self->tx_max_sdu_size = param->pv.i; + + pr_debug("%s(), MaxSduSize=%d\n", __func__, param->pv.i); + + return 0; +} + +/*************************** CLIENT CALLS ***************************/ +/************************** LMP CALLBACKS **************************/ +/* Everything is happily mixed up. Waiting for next clean up - Jean II */ + +/* + * Initialization, that has to be done on new tsap + * instance allocation and on duplication + */ +static void irttp_init_tsap(struct tsap_cb *tsap) +{ + spin_lock_init(&tsap->lock); + init_timer(&tsap->todo_timer); + + skb_queue_head_init(&tsap->rx_queue); + skb_queue_head_init(&tsap->tx_queue); + skb_queue_head_init(&tsap->rx_fragments); +} + +/* + * Function irttp_open_tsap (stsap, notify) + * + * Create TSAP connection endpoint, + */ +struct tsap_cb *irttp_open_tsap(__u8 stsap_sel, int credit, notify_t *notify) +{ + struct tsap_cb *self; + struct lsap_cb *lsap; + notify_t ttp_notify; + + IRDA_ASSERT(irttp->magic == TTP_MAGIC, return NULL;); + + /* The IrLMP spec (IrLMP 1.1 p10) says that we have the right to + * use only 0x01-0x6F. Of course, we can use LSAP_ANY as well. + * JeanII */ + if ((stsap_sel != LSAP_ANY) && + ((stsap_sel < 0x01) || (stsap_sel >= 0x70))) { + pr_debug("%s(), invalid tsap!\n", __func__); + return NULL; + } + + self = kzalloc(sizeof(struct tsap_cb), GFP_ATOMIC); + if (self == NULL) + return NULL; + + /* Initialize internal objects */ + irttp_init_tsap(self); + + /* Initialise todo timer */ + self->todo_timer.data = (unsigned long) self; + self->todo_timer.function = &irttp_todo_expired; + + /* Initialize callbacks for IrLMP to use */ + irda_notify_init(&ttp_notify); + ttp_notify.connect_confirm = irttp_connect_confirm; + ttp_notify.connect_indication = irttp_connect_indication; + ttp_notify.disconnect_indication = irttp_disconnect_indication; + ttp_notify.data_indication = irttp_data_indication; + ttp_notify.udata_indication = irttp_udata_indication; + ttp_notify.flow_indication = irttp_flow_indication; + if (notify->status_indication != NULL) + ttp_notify.status_indication = irttp_status_indication; + ttp_notify.instance = self; + strncpy(ttp_notify.name, notify->name, NOTIFY_MAX_NAME); + + self->magic = TTP_TSAP_MAGIC; + self->connected = FALSE; + + /* + * Create LSAP at IrLMP layer + */ + lsap = irlmp_open_lsap(stsap_sel, &ttp_notify, 0); + if (lsap == NULL) { + pr_debug("%s: unable to allocate LSAP!!\n", __func__); + __irttp_close_tsap(self); + return NULL; + } + + /* + * If user specified LSAP_ANY as source TSAP selector, then IrLMP + * will replace it with whatever source selector which is free, so + * the stsap_sel we have might not be valid anymore + */ + self->stsap_sel = lsap->slsap_sel; + pr_debug("%s(), stsap_sel=%02x\n", __func__, self->stsap_sel); + + self->notify = *notify; + self->lsap = lsap; + + hashbin_insert(irttp->tsaps, (irda_queue_t *) self, (long) self, NULL); + + if (credit > TTP_RX_MAX_CREDIT) + self->initial_credit = TTP_RX_MAX_CREDIT; + else + self->initial_credit = credit; + + return self; +} +EXPORT_SYMBOL(irttp_open_tsap); + +/* + * Function irttp_close (handle) + * + * Remove an instance of a TSAP. This function should only deal with the + * deallocation of the TSAP, and resetting of the TSAPs values; + * + */ +static void __irttp_close_tsap(struct tsap_cb *self) +{ + /* First make sure we're connected. */ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;); + + irttp_flush_queues(self); + + del_timer(&self->todo_timer); + + /* This one won't be cleaned up if we are disconnect_pend + close_pend + * and we receive a disconnect_indication */ + if (self->disconnect_skb) + dev_kfree_skb(self->disconnect_skb); + + self->connected = FALSE; + self->magic = ~TTP_TSAP_MAGIC; + + kfree(self); +} + +/* + * Function irttp_close (self) + * + * Remove TSAP from list of all TSAPs and then deallocate all resources + * associated with this TSAP + * + * Note : because we *free* the tsap structure, it is the responsibility + * of the caller to make sure we are called only once and to deal with + * possible race conditions. - Jean II + */ +int irttp_close_tsap(struct tsap_cb *self) +{ + struct tsap_cb *tsap; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;); + + /* Make sure tsap has been disconnected */ + if (self->connected) { + /* Check if disconnect is not pending */ + if (!test_bit(0, &self->disconnect_pend)) { + net_warn_ratelimited("%s: TSAP still connected!\n", + __func__); + irttp_disconnect_request(self, NULL, P_NORMAL); + } + self->close_pend = TRUE; + irttp_start_todo_timer(self, HZ/10); + + return 0; /* Will be back! */ + } + + tsap = hashbin_remove(irttp->tsaps, (long) self, NULL); + + IRDA_ASSERT(tsap == self, return -1;); + + /* Close corresponding LSAP */ + if (self->lsap) { + irlmp_close_lsap(self->lsap); + self->lsap = NULL; + } + + __irttp_close_tsap(self); + + return 0; +} +EXPORT_SYMBOL(irttp_close_tsap); + +/* + * Function irttp_udata_request (self, skb) + * + * Send unreliable data on this TSAP + * + */ +int irttp_udata_request(struct tsap_cb *self, struct sk_buff *skb) +{ + int ret; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;); + IRDA_ASSERT(skb != NULL, return -1;); + + /* Take shortcut on zero byte packets */ + if (skb->len == 0) { + ret = 0; + goto err; + } + + /* Check that nothing bad happens */ + if (!self->connected) { + net_warn_ratelimited("%s(), Not connected\n", __func__); + ret = -ENOTCONN; + goto err; + } + + if (skb->len > self->max_seg_size) { + net_err_ratelimited("%s(), UData is too large for IrLAP!\n", + __func__); + ret = -EMSGSIZE; + goto err; + } + + irlmp_udata_request(self->lsap, skb); + self->stats.tx_packets++; + + return 0; + +err: + dev_kfree_skb(skb); + return ret; +} +EXPORT_SYMBOL(irttp_udata_request); + + +/* + * Function irttp_data_request (handle, skb) + * + * Queue frame for transmission. If SAR is enabled, fragement the frame + * and queue the fragments for transmission + */ +int irttp_data_request(struct tsap_cb *self, struct sk_buff *skb) +{ + __u8 *frame; + int ret; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;); + IRDA_ASSERT(skb != NULL, return -1;); + + pr_debug("%s() : queue len = %d\n", __func__, + skb_queue_len(&self->tx_queue)); + + /* Take shortcut on zero byte packets */ + if (skb->len == 0) { + ret = 0; + goto err; + } + + /* Check that nothing bad happens */ + if (!self->connected) { + net_warn_ratelimited("%s: Not connected\n", __func__); + ret = -ENOTCONN; + goto err; + } + + /* + * Check if SAR is disabled, and the frame is larger than what fits + * inside an IrLAP frame + */ + if ((self->tx_max_sdu_size == 0) && (skb->len > self->max_seg_size)) { + net_err_ratelimited("%s: SAR disabled, and data is too large for IrLAP!\n", + __func__); + ret = -EMSGSIZE; + goto err; + } + + /* + * Check if SAR is enabled, and the frame is larger than the + * TxMaxSduSize + */ + if ((self->tx_max_sdu_size != 0) && + (self->tx_max_sdu_size != TTP_SAR_UNBOUND) && + (skb->len > self->tx_max_sdu_size)) { + net_err_ratelimited("%s: SAR enabled, but data is larger than TxMaxSduSize!\n", + __func__); + ret = -EMSGSIZE; + goto err; + } + /* + * Check if transmit queue is full + */ + if (skb_queue_len(&self->tx_queue) >= TTP_TX_MAX_QUEUE) { + /* + * Give it a chance to empty itself + */ + irttp_run_tx_queue(self); + + /* Drop packet. This error code should trigger the caller + * to resend the data in the client code - Jean II */ + ret = -ENOBUFS; + goto err; + } + + /* Queue frame, or queue frame segments */ + if ((self->tx_max_sdu_size == 0) || (skb->len < self->max_seg_size)) { + /* Queue frame */ + IRDA_ASSERT(skb_headroom(skb) >= TTP_HEADER, return -1;); + frame = skb_push(skb, TTP_HEADER); + frame[0] = 0x00; /* Clear more bit */ + + skb_queue_tail(&self->tx_queue, skb); + } else { + /* + * Fragment the frame, this function will also queue the + * fragments, we don't care about the fact the transmit + * queue may be overfilled by all the segments for a little + * while + */ + irttp_fragment_skb(self, skb); + } + + /* Check if we can accept more data from client */ + if ((!self->tx_sdu_busy) && + (skb_queue_len(&self->tx_queue) > TTP_TX_HIGH_THRESHOLD)) { + /* Tx queue filling up, so stop client. */ + if (self->notify.flow_indication) { + self->notify.flow_indication(self->notify.instance, + self, FLOW_STOP); + } + /* self->tx_sdu_busy is the state of the client. + * Update state after notifying client to avoid + * race condition with irttp_flow_indication(). + * If the queue empty itself after our test but before + * we set the flag, we will fix ourselves below in + * irttp_run_tx_queue(). + * Jean II */ + self->tx_sdu_busy = TRUE; + } + + /* Try to make some progress */ + irttp_run_tx_queue(self); + + return 0; + +err: + dev_kfree_skb(skb); + return ret; +} +EXPORT_SYMBOL(irttp_data_request); + +/* + * Function irttp_run_tx_queue (self) + * + * Transmit packets queued for transmission (if possible) + * + */ +static void irttp_run_tx_queue(struct tsap_cb *self) +{ + struct sk_buff *skb; + unsigned long flags; + int n; + + pr_debug("%s() : send_credit = %d, queue_len = %d\n", + __func__, + self->send_credit, skb_queue_len(&self->tx_queue)); + + /* Get exclusive access to the tx queue, otherwise don't touch it */ + if (irda_lock(&self->tx_queue_lock) == FALSE) + return; + + /* Try to send out frames as long as we have credits + * and as long as LAP is not full. If LAP is full, it will + * poll us through irttp_flow_indication() - Jean II */ + while ((self->send_credit > 0) && + (!irlmp_lap_tx_queue_full(self->lsap)) && + (skb = skb_dequeue(&self->tx_queue))) { + /* + * Since we can transmit and receive frames concurrently, + * the code below is a critical region and we must assure that + * nobody messes with the credits while we update them. + */ + spin_lock_irqsave(&self->lock, flags); + + n = self->avail_credit; + self->avail_credit = 0; + + /* Only room for 127 credits in frame */ + if (n > 127) { + self->avail_credit = n-127; + n = 127; + } + self->remote_credit += n; + self->send_credit--; + + spin_unlock_irqrestore(&self->lock, flags); + + /* + * More bit must be set by the data_request() or fragment() + * functions + */ + skb->data[0] |= (n & 0x7f); + + /* Detach from socket. + * The current skb has a reference to the socket that sent + * it (skb->sk). When we pass it to IrLMP, the skb will be + * stored in in IrLAP (self->wx_list). When we are within + * IrLAP, we lose the notion of socket, so we should not + * have a reference to a socket. So, we drop it here. + * + * Why does it matter ? + * When the skb is freed (kfree_skb), if it is associated + * with a socket, it release buffer space on the socket + * (through sock_wfree() and sock_def_write_space()). + * If the socket no longer exist, we may crash. Hard. + * When we close a socket, we make sure that associated packets + * in IrTTP are freed. However, we have no way to cancel + * the packet that we have passed to IrLAP. So, if a packet + * remains in IrLAP (retry on the link or else) after we + * close the socket, we are dead ! + * Jean II */ + if (skb->sk != NULL) { + /* IrSOCK application, IrOBEX, ... */ + skb_orphan(skb); + } + /* IrCOMM over IrTTP, IrLAN, ... */ + + /* Pass the skb to IrLMP - done */ + irlmp_data_request(self->lsap, skb); + self->stats.tx_packets++; + } + + /* Check if we can accept more frames from client. + * We don't want to wait until the todo timer to do that, and we + * can't use tasklets (grr...), so we are obliged to give control + * to client. That's ok, this test will be true not too often + * (max once per LAP window) and we are called from places + * where we can spend a bit of time doing stuff. - Jean II */ + if ((self->tx_sdu_busy) && + (skb_queue_len(&self->tx_queue) < TTP_TX_LOW_THRESHOLD) && + (!self->close_pend)) { + if (self->notify.flow_indication) + self->notify.flow_indication(self->notify.instance, + self, FLOW_START); + + /* self->tx_sdu_busy is the state of the client. + * We don't really have a race here, but it's always safer + * to update our state after the client - Jean II */ + self->tx_sdu_busy = FALSE; + } + + /* Reset lock */ + self->tx_queue_lock = 0; +} + +/* + * Function irttp_give_credit (self) + * + * Send a dataless flowdata TTP-PDU and give available credit to peer + * TSAP + */ +static inline void irttp_give_credit(struct tsap_cb *self) +{ + struct sk_buff *tx_skb = NULL; + unsigned long flags; + int n; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;); + + pr_debug("%s() send=%d,avail=%d,remote=%d\n", + __func__, + self->send_credit, self->avail_credit, self->remote_credit); + + /* Give credit to peer */ + tx_skb = alloc_skb(TTP_MAX_HEADER, GFP_ATOMIC); + if (!tx_skb) + return; + + /* Reserve space for LMP, and LAP header */ + skb_reserve(tx_skb, LMP_MAX_HEADER); + + /* + * Since we can transmit and receive frames concurrently, + * the code below is a critical region and we must assure that + * nobody messes with the credits while we update them. + */ + spin_lock_irqsave(&self->lock, flags); + + n = self->avail_credit; + self->avail_credit = 0; + + /* Only space for 127 credits in frame */ + if (n > 127) { + self->avail_credit = n - 127; + n = 127; + } + self->remote_credit += n; + + spin_unlock_irqrestore(&self->lock, flags); + + skb_put(tx_skb, 1); + tx_skb->data[0] = (__u8) (n & 0x7f); + + irlmp_data_request(self->lsap, tx_skb); + self->stats.tx_packets++; +} + +/* + * Function irttp_udata_indication (instance, sap, skb) + * + * Received some unit-data (unreliable) + * + */ +static int irttp_udata_indication(void *instance, void *sap, + struct sk_buff *skb) +{ + struct tsap_cb *self; + int err; + + self = instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;); + IRDA_ASSERT(skb != NULL, return -1;); + + self->stats.rx_packets++; + + /* Just pass data to layer above */ + if (self->notify.udata_indication) { + err = self->notify.udata_indication(self->notify.instance, + self, skb); + /* Same comment as in irttp_do_data_indication() */ + if (!err) + return 0; + } + /* Either no handler, or handler returns an error */ + dev_kfree_skb(skb); + + return 0; +} + +/* + * Function irttp_data_indication (instance, sap, skb) + * + * Receive segment from IrLMP. + * + */ +static int irttp_data_indication(void *instance, void *sap, + struct sk_buff *skb) +{ + struct tsap_cb *self; + unsigned long flags; + int n; + + self = instance; + + n = skb->data[0] & 0x7f; /* Extract the credits */ + + self->stats.rx_packets++; + + /* Deal with inbound credit + * Since we can transmit and receive frames concurrently, + * the code below is a critical region and we must assure that + * nobody messes with the credits while we update them. + */ + spin_lock_irqsave(&self->lock, flags); + self->send_credit += n; + if (skb->len > 1) + self->remote_credit--; + spin_unlock_irqrestore(&self->lock, flags); + + /* + * Data or dataless packet? Dataless frames contains only the + * TTP_HEADER. + */ + if (skb->len > 1) { + /* + * We don't remove the TTP header, since we must preserve the + * more bit, so the defragment routing knows what to do + */ + skb_queue_tail(&self->rx_queue, skb); + } else { + /* Dataless flowdata TTP-PDU */ + dev_kfree_skb(skb); + } + + + /* Push data to the higher layer. + * We do it synchronously because running the todo timer for each + * receive packet would be too much overhead and latency. + * By passing control to the higher layer, we run the risk that + * it may take time or grab a lock. Most often, the higher layer + * will only put packet in a queue. + * Anyway, packets are only dripping through the IrDA, so we can + * have time before the next packet. + * Further, we are run from NET_BH, so the worse that can happen is + * us missing the optimal time to send back the PF bit in LAP. + * Jean II */ + irttp_run_rx_queue(self); + + /* We now give credits to peer in irttp_run_rx_queue(). + * We need to send credit *NOW*, otherwise we are going + * to miss the next Tx window. The todo timer may take + * a while before it's run... - Jean II */ + + /* + * If the peer device has given us some credits and we didn't have + * anyone from before, then we need to shedule the tx queue. + * We need to do that because our Tx have stopped (so we may not + * get any LAP flow indication) and the user may be stopped as + * well. - Jean II + */ + if (self->send_credit == n) { + /* Restart pushing stuff to LAP */ + irttp_run_tx_queue(self); + /* Note : we don't want to schedule the todo timer + * because it has horrible latency. No tasklets + * because the tasklet API is broken. - Jean II */ + } + + return 0; +} + +/* + * Function irttp_status_indication (self, reason) + * + * Status_indication, just pass to the higher layer... + * + */ +static void irttp_status_indication(void *instance, + LINK_STATUS link, LOCK_STATUS lock) +{ + struct tsap_cb *self; + + self = instance; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;); + + /* Check if client has already closed the TSAP and gone away */ + if (self->close_pend) + return; + + /* + * Inform service user if he has requested it + */ + if (self->notify.status_indication != NULL) + self->notify.status_indication(self->notify.instance, + link, lock); + else + pr_debug("%s(), no handler\n", __func__); +} + +/* + * Function irttp_flow_indication (self, reason) + * + * Flow_indication : IrLAP tells us to send more data. + * + */ +static void irttp_flow_indication(void *instance, void *sap, LOCAL_FLOW flow) +{ + struct tsap_cb *self; + + self = instance; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;); + + pr_debug("%s(instance=%p)\n", __func__, self); + + /* We are "polled" directly from LAP, and the LAP want to fill + * its Tx window. We want to do our best to send it data, so that + * we maximise the window. On the other hand, we want to limit the + * amount of work here so that LAP doesn't hang forever waiting + * for packets. - Jean II */ + + /* Try to send some packets. Currently, LAP calls us every time + * there is one free slot, so we will send only one packet. + * This allow the scheduler to do its round robin - Jean II */ + irttp_run_tx_queue(self); + + /* Note regarding the interraction with higher layer. + * irttp_run_tx_queue() may call the client when its queue + * start to empty, via notify.flow_indication(). Initially. + * I wanted this to happen in a tasklet, to avoid client + * grabbing the CPU, but we can't use tasklets safely. And timer + * is definitely too slow. + * This will happen only once per LAP window, and usually at + * the third packet (unless window is smaller). LAP is still + * doing mtt and sending first packet so it's sort of OK + * to do that. Jean II */ + + /* If we need to send disconnect. try to do it now */ + if (self->disconnect_pend) + irttp_start_todo_timer(self, 0); +} + +/* + * Function irttp_flow_request (self, command) + * + * This function could be used by the upper layers to tell IrTTP to stop + * delivering frames if the receive queues are starting to get full, or + * to tell IrTTP to start delivering frames again. + */ +void irttp_flow_request(struct tsap_cb *self, LOCAL_FLOW flow) +{ + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;); + + switch (flow) { + case FLOW_STOP: + pr_debug("%s(), flow stop\n", __func__); + self->rx_sdu_busy = TRUE; + break; + case FLOW_START: + pr_debug("%s(), flow start\n", __func__); + self->rx_sdu_busy = FALSE; + + /* Client say he can accept more data, try to free our + * queues ASAP - Jean II */ + irttp_run_rx_queue(self); + + break; + default: + pr_debug("%s(), Unknown flow command!\n", __func__); + } +} +EXPORT_SYMBOL(irttp_flow_request); + +/* + * Function irttp_connect_request (self, dtsap_sel, daddr, qos) + * + * Try to connect to remote destination TSAP selector + * + */ +int irttp_connect_request(struct tsap_cb *self, __u8 dtsap_sel, + __u32 saddr, __u32 daddr, + struct qos_info *qos, __u32 max_sdu_size, + struct sk_buff *userdata) +{ + struct sk_buff *tx_skb; + __u8 *frame; + __u8 n; + + pr_debug("%s(), max_sdu_size=%d\n", __func__, max_sdu_size); + + IRDA_ASSERT(self != NULL, return -EBADR;); + IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -EBADR;); + + if (self->connected) { + if (userdata) + dev_kfree_skb(userdata); + return -EISCONN; + } + + /* Any userdata supplied? */ + if (userdata == NULL) { + tx_skb = alloc_skb(TTP_MAX_HEADER + TTP_SAR_HEADER, + GFP_ATOMIC); + if (!tx_skb) + return -ENOMEM; + + /* Reserve space for MUX_CONTROL and LAP header */ + skb_reserve(tx_skb, TTP_MAX_HEADER + TTP_SAR_HEADER); + } else { + tx_skb = userdata; + /* + * Check that the client has reserved enough space for + * headers + */ + IRDA_ASSERT(skb_headroom(userdata) >= TTP_MAX_HEADER, + { dev_kfree_skb(userdata); return -1; }); + } + + /* Initialize connection parameters */ + self->connected = FALSE; + self->avail_credit = 0; + self->rx_max_sdu_size = max_sdu_size; + self->rx_sdu_size = 0; + self->rx_sdu_busy = FALSE; + self->dtsap_sel = dtsap_sel; + + n = self->initial_credit; + + self->remote_credit = 0; + self->send_credit = 0; + + /* + * Give away max 127 credits for now + */ + if (n > 127) { + self->avail_credit = n - 127; + n = 127; + } + + self->remote_credit = n; + + /* SAR enabled? */ + if (max_sdu_size > 0) { + IRDA_ASSERT(skb_headroom(tx_skb) >= (TTP_MAX_HEADER + TTP_SAR_HEADER), + { dev_kfree_skb(tx_skb); return -1; }); + + /* Insert SAR parameters */ + frame = skb_push(tx_skb, TTP_HEADER + TTP_SAR_HEADER); + + frame[0] = TTP_PARAMETERS | n; + frame[1] = 0x04; /* Length */ + frame[2] = 0x01; /* MaxSduSize */ + frame[3] = 0x02; /* Value length */ + + put_unaligned(cpu_to_be16((__u16) max_sdu_size), + (__be16 *)(frame+4)); + } else { + /* Insert plain TTP header */ + frame = skb_push(tx_skb, TTP_HEADER); + + /* Insert initial credit in frame */ + frame[0] = n & 0x7f; + } + + /* Connect with IrLMP. No QoS parameters for now */ + return irlmp_connect_request(self->lsap, dtsap_sel, saddr, daddr, qos, + tx_skb); +} +EXPORT_SYMBOL(irttp_connect_request); + +/* + * Function irttp_connect_confirm (handle, qos, skb) + * + * Service user confirms TSAP connection with peer. + * + */ +static void irttp_connect_confirm(void *instance, void *sap, + struct qos_info *qos, __u32 max_seg_size, + __u8 max_header_size, struct sk_buff *skb) +{ + struct tsap_cb *self; + int parameters; + int ret; + __u8 plen; + __u8 n; + + self = instance; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;); + IRDA_ASSERT(skb != NULL, return;); + + self->max_seg_size = max_seg_size - TTP_HEADER; + self->max_header_size = max_header_size + TTP_HEADER; + + /* + * Check if we have got some QoS parameters back! This should be the + * negotiated QoS for the link. + */ + if (qos) { + pr_debug("IrTTP, Negotiated BAUD_RATE: %02x\n", + qos->baud_rate.bits); + pr_debug("IrTTP, Negotiated BAUD_RATE: %d bps.\n", + qos->baud_rate.value); + } + + n = skb->data[0] & 0x7f; + + pr_debug("%s(), Initial send_credit=%d\n", __func__, n); + + self->send_credit = n; + self->tx_max_sdu_size = 0; + self->connected = TRUE; + + parameters = skb->data[0] & 0x80; + + IRDA_ASSERT(skb->len >= TTP_HEADER, return;); + skb_pull(skb, TTP_HEADER); + + if (parameters) { + plen = skb->data[0]; + + ret = irda_param_extract_all(self, skb->data+1, + IRDA_MIN(skb->len-1, plen), + ¶m_info); + + /* Any errors in the parameter list? */ + if (ret < 0) { + net_warn_ratelimited("%s: error extracting parameters\n", + __func__); + dev_kfree_skb(skb); + + /* Do not accept this connection attempt */ + return; + } + /* Remove parameters */ + skb_pull(skb, IRDA_MIN(skb->len, plen+1)); + } + + pr_debug("%s() send=%d,avail=%d,remote=%d\n", __func__, + self->send_credit, self->avail_credit, self->remote_credit); + + pr_debug("%s(), MaxSduSize=%d\n", __func__, + self->tx_max_sdu_size); + + if (self->notify.connect_confirm) { + self->notify.connect_confirm(self->notify.instance, self, qos, + self->tx_max_sdu_size, + self->max_header_size, skb); + } else + dev_kfree_skb(skb); +} + +/* + * Function irttp_connect_indication (handle, skb) + * + * Some other device is connecting to this TSAP + * + */ +static void irttp_connect_indication(void *instance, void *sap, + struct qos_info *qos, __u32 max_seg_size, __u8 max_header_size, + struct sk_buff *skb) +{ + struct tsap_cb *self; + struct lsap_cb *lsap; + int parameters; + int ret; + __u8 plen; + __u8 n; + + self = instance; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;); + IRDA_ASSERT(skb != NULL, return;); + + lsap = sap; + + self->max_seg_size = max_seg_size - TTP_HEADER; + self->max_header_size = max_header_size+TTP_HEADER; + + pr_debug("%s(), TSAP sel=%02x\n", __func__, self->stsap_sel); + + /* Need to update dtsap_sel if its equal to LSAP_ANY */ + self->dtsap_sel = lsap->dlsap_sel; + + n = skb->data[0] & 0x7f; + + self->send_credit = n; + self->tx_max_sdu_size = 0; + + parameters = skb->data[0] & 0x80; + + IRDA_ASSERT(skb->len >= TTP_HEADER, return;); + skb_pull(skb, TTP_HEADER); + + if (parameters) { + plen = skb->data[0]; + + ret = irda_param_extract_all(self, skb->data+1, + IRDA_MIN(skb->len-1, plen), + ¶m_info); + + /* Any errors in the parameter list? */ + if (ret < 0) { + net_warn_ratelimited("%s: error extracting parameters\n", + __func__); + dev_kfree_skb(skb); + + /* Do not accept this connection attempt */ + return; + } + + /* Remove parameters */ + skb_pull(skb, IRDA_MIN(skb->len, plen+1)); + } + + if (self->notify.connect_indication) { + self->notify.connect_indication(self->notify.instance, self, + qos, self->tx_max_sdu_size, + self->max_header_size, skb); + } else + dev_kfree_skb(skb); +} + +/* + * Function irttp_connect_response (handle, userdata) + * + * Service user is accepting the connection, just pass it down to + * IrLMP! + * + */ +int irttp_connect_response(struct tsap_cb *self, __u32 max_sdu_size, + struct sk_buff *userdata) +{ + struct sk_buff *tx_skb; + __u8 *frame; + int ret; + __u8 n; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;); + + pr_debug("%s(), Source TSAP selector=%02x\n", __func__, + self->stsap_sel); + + /* Any userdata supplied? */ + if (userdata == NULL) { + tx_skb = alloc_skb(TTP_MAX_HEADER + TTP_SAR_HEADER, + GFP_ATOMIC); + if (!tx_skb) + return -ENOMEM; + + /* Reserve space for MUX_CONTROL and LAP header */ + skb_reserve(tx_skb, TTP_MAX_HEADER + TTP_SAR_HEADER); + } else { + tx_skb = userdata; + /* + * Check that the client has reserved enough space for + * headers + */ + IRDA_ASSERT(skb_headroom(userdata) >= TTP_MAX_HEADER, + { dev_kfree_skb(userdata); return -1; }); + } + + self->avail_credit = 0; + self->remote_credit = 0; + self->rx_max_sdu_size = max_sdu_size; + self->rx_sdu_size = 0; + self->rx_sdu_busy = FALSE; + + n = self->initial_credit; + + /* Frame has only space for max 127 credits (7 bits) */ + if (n > 127) { + self->avail_credit = n - 127; + n = 127; + } + + self->remote_credit = n; + self->connected = TRUE; + + /* SAR enabled? */ + if (max_sdu_size > 0) { + IRDA_ASSERT(skb_headroom(tx_skb) >= (TTP_MAX_HEADER + TTP_SAR_HEADER), + { dev_kfree_skb(tx_skb); return -1; }); + + /* Insert TTP header with SAR parameters */ + frame = skb_push(tx_skb, TTP_HEADER + TTP_SAR_HEADER); + + frame[0] = TTP_PARAMETERS | n; + frame[1] = 0x04; /* Length */ + + /* irda_param_insert(self, IRTTP_MAX_SDU_SIZE, frame+1, */ +/* TTP_SAR_HEADER, ¶m_info) */ + + frame[2] = 0x01; /* MaxSduSize */ + frame[3] = 0x02; /* Value length */ + + put_unaligned(cpu_to_be16((__u16) max_sdu_size), + (__be16 *)(frame+4)); + } else { + /* Insert TTP header */ + frame = skb_push(tx_skb, TTP_HEADER); + + frame[0] = n & 0x7f; + } + + ret = irlmp_connect_response(self->lsap, tx_skb); + + return ret; +} +EXPORT_SYMBOL(irttp_connect_response); + +/* + * Function irttp_dup (self, instance) + * + * Duplicate TSAP, can be used by servers to confirm a connection on a + * new TSAP so it can keep listening on the old one. + */ +struct tsap_cb *irttp_dup(struct tsap_cb *orig, void *instance) +{ + struct tsap_cb *new; + unsigned long flags; + + /* Protect our access to the old tsap instance */ + spin_lock_irqsave(&irttp->tsaps->hb_spinlock, flags); + + /* Find the old instance */ + if (!hashbin_find(irttp->tsaps, (long) orig, NULL)) { + pr_debug("%s(), unable to find TSAP\n", __func__); + spin_unlock_irqrestore(&irttp->tsaps->hb_spinlock, flags); + return NULL; + } + + /* Allocate a new instance */ + new = kmemdup(orig, sizeof(struct tsap_cb), GFP_ATOMIC); + if (!new) { + pr_debug("%s(), unable to kmalloc\n", __func__); + spin_unlock_irqrestore(&irttp->tsaps->hb_spinlock, flags); + return NULL; + } + spin_lock_init(&new->lock); + + /* We don't need the old instance any more */ + spin_unlock_irqrestore(&irttp->tsaps->hb_spinlock, flags); + + /* Try to dup the LSAP (may fail if we were too slow) */ + new->lsap = irlmp_dup(orig->lsap, new); + if (!new->lsap) { + pr_debug("%s(), dup failed!\n", __func__); + kfree(new); + return NULL; + } + + /* Not everything should be copied */ + new->notify.instance = instance; + + /* Initialize internal objects */ + irttp_init_tsap(new); + + /* This is locked */ + hashbin_insert(irttp->tsaps, (irda_queue_t *) new, (long) new, NULL); + + return new; +} +EXPORT_SYMBOL(irttp_dup); + +/* + * Function irttp_disconnect_request (self) + * + * Close this connection please! If priority is high, the queued data + * segments, if any, will be deallocated first + * + */ +int irttp_disconnect_request(struct tsap_cb *self, struct sk_buff *userdata, + int priority) +{ + int ret; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;); + + /* Already disconnected? */ + if (!self->connected) { + pr_debug("%s(), already disconnected!\n", __func__); + if (userdata) + dev_kfree_skb(userdata); + return -1; + } + + /* Disconnect already pending ? + * We need to use an atomic operation to prevent reentry. This + * function may be called from various context, like user, timer + * for following a disconnect_indication() (i.e. net_bh). + * Jean II */ + if (test_and_set_bit(0, &self->disconnect_pend)) { + pr_debug("%s(), disconnect already pending\n", + __func__); + if (userdata) + dev_kfree_skb(userdata); + + /* Try to make some progress */ + irttp_run_tx_queue(self); + return -1; + } + + /* + * Check if there is still data segments in the transmit queue + */ + if (!skb_queue_empty(&self->tx_queue)) { + if (priority == P_HIGH) { + /* + * No need to send the queued data, if we are + * disconnecting right now since the data will + * not have any usable connection to be sent on + */ + pr_debug("%s(): High priority!!()\n", __func__); + irttp_flush_queues(self); + } else if (priority == P_NORMAL) { + /* + * Must delay disconnect until after all data segments + * have been sent and the tx_queue is empty + */ + /* We'll reuse this one later for the disconnect */ + self->disconnect_skb = userdata; /* May be NULL */ + + irttp_run_tx_queue(self); + + irttp_start_todo_timer(self, HZ/10); + return -1; + } + } + /* Note : we don't need to check if self->rx_queue is full and the + * state of self->rx_sdu_busy because the disconnect response will + * be sent at the LMP level (so even if the peer has its Tx queue + * full of data). - Jean II */ + + pr_debug("%s(), Disconnecting ...\n", __func__); + self->connected = FALSE; + + if (!userdata) { + struct sk_buff *tx_skb; + tx_skb = alloc_skb(LMP_MAX_HEADER, GFP_ATOMIC); + if (!tx_skb) + return -ENOMEM; + + /* + * Reserve space for MUX and LAP header + */ + skb_reserve(tx_skb, LMP_MAX_HEADER); + + userdata = tx_skb; + } + ret = irlmp_disconnect_request(self->lsap, userdata); + + /* The disconnect is no longer pending */ + clear_bit(0, &self->disconnect_pend); /* FALSE */ + + return ret; +} +EXPORT_SYMBOL(irttp_disconnect_request); + +/* + * Function irttp_disconnect_indication (self, reason) + * + * Disconnect indication, TSAP disconnected by peer? + * + */ +static void irttp_disconnect_indication(void *instance, void *sap, + LM_REASON reason, struct sk_buff *skb) +{ + struct tsap_cb *self; + + self = instance; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return;); + + /* Prevent higher layer to send more data */ + self->connected = FALSE; + + /* Check if client has already tried to close the TSAP */ + if (self->close_pend) { + /* In this case, the higher layer is probably gone. Don't + * bother it and clean up the remains - Jean II */ + if (skb) + dev_kfree_skb(skb); + irttp_close_tsap(self); + return; + } + + /* If we are here, we assume that is the higher layer is still + * waiting for the disconnect notification and able to process it, + * even if he tried to disconnect. Otherwise, it would have already + * attempted to close the tsap and self->close_pend would be TRUE. + * Jean II */ + + /* No need to notify the client if has already tried to disconnect */ + if (self->notify.disconnect_indication) + self->notify.disconnect_indication(self->notify.instance, self, + reason, skb); + else + if (skb) + dev_kfree_skb(skb); +} + +/* + * Function irttp_do_data_indication (self, skb) + * + * Try to deliver reassembled skb to layer above, and requeue it if that + * for some reason should fail. We mark rx sdu as busy to apply back + * pressure is necessary. + */ +static void irttp_do_data_indication(struct tsap_cb *self, struct sk_buff *skb) +{ + int err; + + /* Check if client has already closed the TSAP and gone away */ + if (self->close_pend) { + dev_kfree_skb(skb); + return; + } + + err = self->notify.data_indication(self->notify.instance, self, skb); + + /* Usually the layer above will notify that it's input queue is + * starting to get filled by using the flow request, but this may + * be difficult, so it can instead just refuse to eat it and just + * give an error back + */ + if (err) { + pr_debug("%s() requeueing skb!\n", __func__); + + /* Make sure we take a break */ + self->rx_sdu_busy = TRUE; + + /* Need to push the header in again */ + skb_push(skb, TTP_HEADER); + skb->data[0] = 0x00; /* Make sure MORE bit is cleared */ + + /* Put skb back on queue */ + skb_queue_head(&self->rx_queue, skb); + } +} + +/* + * Function irttp_run_rx_queue (self) + * + * Check if we have any frames to be transmitted, or if we have any + * available credit to give away. + */ +static void irttp_run_rx_queue(struct tsap_cb *self) +{ + struct sk_buff *skb; + int more = 0; + + pr_debug("%s() send=%d,avail=%d,remote=%d\n", __func__, + self->send_credit, self->avail_credit, self->remote_credit); + + /* Get exclusive access to the rx queue, otherwise don't touch it */ + if (irda_lock(&self->rx_queue_lock) == FALSE) + return; + + /* + * Reassemble all frames in receive queue and deliver them + */ + while (!self->rx_sdu_busy && (skb = skb_dequeue(&self->rx_queue))) { + /* This bit will tell us if it's the last fragment or not */ + more = skb->data[0] & 0x80; + + /* Remove TTP header */ + skb_pull(skb, TTP_HEADER); + + /* Add the length of the remaining data */ + self->rx_sdu_size += skb->len; + + /* + * If SAR is disabled, or user has requested no reassembly + * of received fragments then we just deliver them + * immediately. This can be requested by clients that + * implements byte streams without any message boundaries + */ + if (self->rx_max_sdu_size == TTP_SAR_DISABLE) { + irttp_do_data_indication(self, skb); + self->rx_sdu_size = 0; + + continue; + } + + /* Check if this is a fragment, and not the last fragment */ + if (more) { + /* + * Queue the fragment if we still are within the + * limits of the maximum size of the rx_sdu + */ + if (self->rx_sdu_size <= self->rx_max_sdu_size) { + pr_debug("%s(), queueing frag\n", + __func__); + skb_queue_tail(&self->rx_fragments, skb); + } else { + /* Free the part of the SDU that is too big */ + dev_kfree_skb(skb); + } + continue; + } + /* + * This is the last fragment, so time to reassemble! + */ + if ((self->rx_sdu_size <= self->rx_max_sdu_size) || + (self->rx_max_sdu_size == TTP_SAR_UNBOUND)) { + /* + * A little optimizing. Only queue the fragment if + * there are other fragments. Since if this is the + * last and only fragment, there is no need to + * reassemble :-) + */ + if (!skb_queue_empty(&self->rx_fragments)) { + skb_queue_tail(&self->rx_fragments, + skb); + + skb = irttp_reassemble_skb(self); + } + + /* Now we can deliver the reassembled skb */ + irttp_do_data_indication(self, skb); + } else { + pr_debug("%s(), Truncated frame\n", __func__); + + /* Free the part of the SDU that is too big */ + dev_kfree_skb(skb); + + /* Deliver only the valid but truncated part of SDU */ + skb = irttp_reassemble_skb(self); + + irttp_do_data_indication(self, skb); + } + self->rx_sdu_size = 0; + } + + /* + * It's not trivial to keep track of how many credits are available + * by incrementing at each packet, because delivery may fail + * (irttp_do_data_indication() may requeue the frame) and because + * we need to take care of fragmentation. + * We want the other side to send up to initial_credit packets. + * We have some frames in our queues, and we have already allowed it + * to send remote_credit. + * No need to spinlock, write is atomic and self correcting... + * Jean II + */ + self->avail_credit = (self->initial_credit - + (self->remote_credit + + skb_queue_len(&self->rx_queue) + + skb_queue_len(&self->rx_fragments))); + + /* Do we have too much credits to send to peer ? */ + if ((self->remote_credit <= TTP_RX_MIN_CREDIT) && + (self->avail_credit > 0)) { + /* Send explicit credit frame */ + irttp_give_credit(self); + /* Note : do *NOT* check if tx_queue is non-empty, that + * will produce deadlocks. I repeat : send a credit frame + * even if we have something to send in our Tx queue. + * If we have credits, it means that our Tx queue is blocked. + * + * Let's suppose the peer can't keep up with our Tx. He will + * flow control us by not sending us any credits, and we + * will stop Tx and start accumulating credits here. + * Up to the point where the peer will stop its Tx queue, + * for lack of credits. + * Let's assume the peer application is single threaded. + * It will block on Tx and never consume any Rx buffer. + * Deadlock. Guaranteed. - Jean II + */ + } + + /* Reset lock */ + self->rx_queue_lock = 0; +} + +#ifdef CONFIG_PROC_FS +struct irttp_iter_state { + int id; +}; + +static void *irttp_seq_start(struct seq_file *seq, loff_t *pos) +{ + struct irttp_iter_state *iter = seq->private; + struct tsap_cb *self; + + /* Protect our access to the tsap list */ + spin_lock_irq(&irttp->tsaps->hb_spinlock); + iter->id = 0; + + for (self = (struct tsap_cb *) hashbin_get_first(irttp->tsaps); + self != NULL; + self = (struct tsap_cb *) hashbin_get_next(irttp->tsaps)) { + if (iter->id == *pos) + break; + ++iter->id; + } + + return self; +} + +static void *irttp_seq_next(struct seq_file *seq, void *v, loff_t *pos) +{ + struct irttp_iter_state *iter = seq->private; + + ++*pos; + ++iter->id; + return (void *) hashbin_get_next(irttp->tsaps); +} + +static void irttp_seq_stop(struct seq_file *seq, void *v) +{ + spin_unlock_irq(&irttp->tsaps->hb_spinlock); +} + +static int irttp_seq_show(struct seq_file *seq, void *v) +{ + const struct irttp_iter_state *iter = seq->private; + const struct tsap_cb *self = v; + + seq_printf(seq, "TSAP %d, ", iter->id); + seq_printf(seq, "stsap_sel: %02x, ", + self->stsap_sel); + seq_printf(seq, "dtsap_sel: %02x\n", + self->dtsap_sel); + seq_printf(seq, " connected: %s, ", + self->connected ? "TRUE" : "FALSE"); + seq_printf(seq, "avail credit: %d, ", + self->avail_credit); + seq_printf(seq, "remote credit: %d, ", + self->remote_credit); + seq_printf(seq, "send credit: %d\n", + self->send_credit); + seq_printf(seq, " tx packets: %lu, ", + self->stats.tx_packets); + seq_printf(seq, "rx packets: %lu, ", + self->stats.rx_packets); + seq_printf(seq, "tx_queue len: %u ", + skb_queue_len(&self->tx_queue)); + seq_printf(seq, "rx_queue len: %u\n", + skb_queue_len(&self->rx_queue)); + seq_printf(seq, " tx_sdu_busy: %s, ", + self->tx_sdu_busy ? "TRUE" : "FALSE"); + seq_printf(seq, "rx_sdu_busy: %s\n", + self->rx_sdu_busy ? "TRUE" : "FALSE"); + seq_printf(seq, " max_seg_size: %u, ", + self->max_seg_size); + seq_printf(seq, "tx_max_sdu_size: %u, ", + self->tx_max_sdu_size); + seq_printf(seq, "rx_max_sdu_size: %u\n", + self->rx_max_sdu_size); + + seq_printf(seq, " Used by (%s)\n\n", + self->notify.name); + return 0; +} + +static const struct seq_operations irttp_seq_ops = { + .start = irttp_seq_start, + .next = irttp_seq_next, + .stop = irttp_seq_stop, + .show = irttp_seq_show, +}; + +static int irttp_seq_open(struct inode *inode, struct file *file) +{ + return seq_open_private(file, &irttp_seq_ops, + sizeof(struct irttp_iter_state)); +} + +const struct file_operations irttp_seq_fops = { + .owner = THIS_MODULE, + .open = irttp_seq_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release_private, +}; + +#endif /* PROC_FS */ diff --git a/kernel/net/irda/parameters.c b/kernel/net/irda/parameters.c new file mode 100644 index 000000000..16ce32ffe --- /dev/null +++ b/kernel/net/irda/parameters.c @@ -0,0 +1,584 @@ +/********************************************************************* + * + * Filename: parameters.c + * Version: 1.0 + * Description: A more general way to handle (pi,pl,pv) parameters + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Mon Jun 7 10:25:11 1999 + * Modified at: Sun Jan 30 14:08:39 2000 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1999-2000 Dag Brattli, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + ********************************************************************/ + +#include <linux/types.h> +#include <linux/module.h> + +#include <asm/unaligned.h> +#include <asm/byteorder.h> + +#include <net/irda/irda.h> +#include <net/irda/parameters.h> + +static int irda_extract_integer(void *self, __u8 *buf, int len, __u8 pi, + PV_TYPE type, PI_HANDLER func); +static int irda_extract_string(void *self, __u8 *buf, int len, __u8 pi, + PV_TYPE type, PI_HANDLER func); +static int irda_extract_octseq(void *self, __u8 *buf, int len, __u8 pi, + PV_TYPE type, PI_HANDLER func); +static int irda_extract_no_value(void *self, __u8 *buf, int len, __u8 pi, + PV_TYPE type, PI_HANDLER func); + +static int irda_insert_integer(void *self, __u8 *buf, int len, __u8 pi, + PV_TYPE type, PI_HANDLER func); +static int irda_insert_no_value(void *self, __u8 *buf, int len, __u8 pi, + PV_TYPE type, PI_HANDLER func); + +static int irda_param_unpack(__u8 *buf, char *fmt, ...); + +/* Parameter value call table. Must match PV_TYPE */ +static const PV_HANDLER pv_extract_table[] = { + irda_extract_integer, /* Handler for any length integers */ + irda_extract_integer, /* Handler for 8 bits integers */ + irda_extract_integer, /* Handler for 16 bits integers */ + irda_extract_string, /* Handler for strings */ + irda_extract_integer, /* Handler for 32 bits integers */ + irda_extract_octseq, /* Handler for octet sequences */ + irda_extract_no_value /* Handler for no value parameters */ +}; + +static const PV_HANDLER pv_insert_table[] = { + irda_insert_integer, /* Handler for any length integers */ + irda_insert_integer, /* Handler for 8 bits integers */ + irda_insert_integer, /* Handler for 16 bits integers */ + NULL, /* Handler for strings */ + irda_insert_integer, /* Handler for 32 bits integers */ + NULL, /* Handler for octet sequences */ + irda_insert_no_value /* Handler for no value parameters */ +}; + +/* + * Function irda_insert_no_value (self, buf, len, pi, type, func) + */ +static int irda_insert_no_value(void *self, __u8 *buf, int len, __u8 pi, + PV_TYPE type, PI_HANDLER func) +{ + irda_param_t p; + int ret; + + p.pi = pi; + p.pl = 0; + + /* Call handler for this parameter */ + ret = (*func)(self, &p, PV_GET); + + /* Extract values anyway, since handler may need them */ + irda_param_pack(buf, "bb", p.pi, p.pl); + + if (ret < 0) + return ret; + + return 2; /* Inserted pl+2 bytes */ +} + +/* + * Function irda_extract_no_value (self, buf, len, type, func) + * + * Extracts a parameter without a pv field (pl=0) + * + */ +static int irda_extract_no_value(void *self, __u8 *buf, int len, __u8 pi, + PV_TYPE type, PI_HANDLER func) +{ + irda_param_t p; + int ret; + + /* Extract values anyway, since handler may need them */ + irda_param_unpack(buf, "bb", &p.pi, &p.pl); + + /* Call handler for this parameter */ + ret = (*func)(self, &p, PV_PUT); + + if (ret < 0) + return ret; + + return 2; /* Extracted pl+2 bytes */ +} + +/* + * Function irda_insert_integer (self, buf, len, pi, type, func) + */ +static int irda_insert_integer(void *self, __u8 *buf, int len, __u8 pi, + PV_TYPE type, PI_HANDLER func) +{ + irda_param_t p; + int n = 0; + int err; + + p.pi = pi; /* In case handler needs to know */ + p.pl = type & PV_MASK; /* The integer type codes the length as well */ + p.pv.i = 0; /* Clear value */ + + /* Call handler for this parameter */ + err = (*func)(self, &p, PV_GET); + if (err < 0) + return err; + + /* + * If parameter length is still 0, then (1) this is an any length + * integer, and (2) the handler function does not care which length + * we choose to use, so we pick the one the gives the fewest bytes. + */ + if (p.pl == 0) { + if (p.pv.i < 0xff) { + pr_debug("%s(), using 1 byte\n", __func__); + p.pl = 1; + } else if (p.pv.i < 0xffff) { + pr_debug("%s(), using 2 bytes\n", __func__); + p.pl = 2; + } else { + pr_debug("%s(), using 4 bytes\n", __func__); + p.pl = 4; /* Default length */ + } + } + /* Check if buffer is long enough for insertion */ + if (len < (2+p.pl)) { + net_warn_ratelimited("%s: buffer too short for insertion!\n", + __func__); + return -1; + } + pr_debug("%s(), pi=%#x, pl=%d, pi=%d\n", __func__, + p.pi, p.pl, p.pv.i); + switch (p.pl) { + case 1: + n += irda_param_pack(buf, "bbb", p.pi, p.pl, (__u8) p.pv.i); + break; + case 2: + if (type & PV_BIG_ENDIAN) + p.pv.i = cpu_to_be16((__u16) p.pv.i); + else + p.pv.i = cpu_to_le16((__u16) p.pv.i); + n += irda_param_pack(buf, "bbs", p.pi, p.pl, (__u16) p.pv.i); + break; + case 4: + if (type & PV_BIG_ENDIAN) + cpu_to_be32s(&p.pv.i); + else + cpu_to_le32s(&p.pv.i); + n += irda_param_pack(buf, "bbi", p.pi, p.pl, p.pv.i); + + break; + default: + net_warn_ratelimited("%s: length %d not supported\n", + __func__, p.pl); + /* Skip parameter */ + return -1; + } + + return p.pl+2; /* Inserted pl+2 bytes */ +} + +/* + * Function irda_extract integer (self, buf, len, pi, type, func) + * + * Extract a possibly variable length integer from buffer, and call + * handler for processing of the parameter + */ +static int irda_extract_integer(void *self, __u8 *buf, int len, __u8 pi, + PV_TYPE type, PI_HANDLER func) +{ + irda_param_t p; + int n = 0; + int extract_len; /* Real length we extract */ + int err; + + p.pi = pi; /* In case handler needs to know */ + p.pl = buf[1]; /* Extract length of value */ + p.pv.i = 0; /* Clear value */ + extract_len = p.pl; /* Default : extract all */ + + /* Check if buffer is long enough for parsing */ + if (len < (2+p.pl)) { + net_warn_ratelimited("%s: buffer too short for parsing! Need %d bytes, but len is only %d\n", + __func__, p.pl, len); + return -1; + } + + /* + * Check that the integer length is what we expect it to be. If the + * handler want a 16 bits integer then a 32 bits is not good enough + * PV_INTEGER means that the handler is flexible. + */ + if (((type & PV_MASK) != PV_INTEGER) && ((type & PV_MASK) != p.pl)) { + net_err_ratelimited("%s: invalid parameter length! Expected %d bytes, but value had %d bytes!\n", + __func__, type & PV_MASK, p.pl); + + /* Most parameters are bit/byte fields or little endian, + * so it's ok to only extract a subset of it (the subset + * that the handler expect). This is necessary, as some + * broken implementations seems to add extra undefined bits. + * If the parameter is shorter than we expect or is big + * endian, we can't play those tricks. Jean II */ + if((p.pl < (type & PV_MASK)) || (type & PV_BIG_ENDIAN)) { + /* Skip parameter */ + return p.pl+2; + } else { + /* Extract subset of it, fallthrough */ + extract_len = type & PV_MASK; + } + } + + + switch (extract_len) { + case 1: + n += irda_param_unpack(buf+2, "b", &p.pv.i); + break; + case 2: + n += irda_param_unpack(buf+2, "s", &p.pv.i); + if (type & PV_BIG_ENDIAN) + p.pv.i = be16_to_cpu((__u16) p.pv.i); + else + p.pv.i = le16_to_cpu((__u16) p.pv.i); + break; + case 4: + n += irda_param_unpack(buf+2, "i", &p.pv.i); + if (type & PV_BIG_ENDIAN) + be32_to_cpus(&p.pv.i); + else + le32_to_cpus(&p.pv.i); + break; + default: + net_warn_ratelimited("%s: length %d not supported\n", + __func__, p.pl); + + /* Skip parameter */ + return p.pl+2; + } + + pr_debug("%s(), pi=%#x, pl=%d, pi=%d\n", __func__, + p.pi, p.pl, p.pv.i); + /* Call handler for this parameter */ + err = (*func)(self, &p, PV_PUT); + if (err < 0) + return err; + + return p.pl+2; /* Extracted pl+2 bytes */ +} + +/* + * Function irda_extract_string (self, buf, len, type, func) + */ +static int irda_extract_string(void *self, __u8 *buf, int len, __u8 pi, + PV_TYPE type, PI_HANDLER func) +{ + char str[33]; + irda_param_t p; + int err; + + p.pi = pi; /* In case handler needs to know */ + p.pl = buf[1]; /* Extract length of value */ + if (p.pl > 32) + p.pl = 32; + + pr_debug("%s(), pi=%#x, pl=%d\n", __func__, + p.pi, p.pl); + + /* Check if buffer is long enough for parsing */ + if (len < (2+p.pl)) { + net_warn_ratelimited("%s: buffer too short for parsing! Need %d bytes, but len is only %d\n", + __func__, p.pl, len); + return -1; + } + + /* Should be safe to copy string like this since we have already + * checked that the buffer is long enough */ + strncpy(str, buf+2, p.pl); + + pr_debug("%s(), str=0x%02x 0x%02x\n", + __func__, (__u8)str[0], (__u8)str[1]); + + /* Null terminate string */ + str[p.pl] = '\0'; + + p.pv.c = str; /* Handler will need to take a copy */ + + /* Call handler for this parameter */ + err = (*func)(self, &p, PV_PUT); + if (err < 0) + return err; + + return p.pl+2; /* Extracted pl+2 bytes */ +} + +/* + * Function irda_extract_octseq (self, buf, len, type, func) + */ +static int irda_extract_octseq(void *self, __u8 *buf, int len, __u8 pi, + PV_TYPE type, PI_HANDLER func) +{ + irda_param_t p; + + p.pi = pi; /* In case handler needs to know */ + p.pl = buf[1]; /* Extract length of value */ + + /* Check if buffer is long enough for parsing */ + if (len < (2+p.pl)) { + net_warn_ratelimited("%s: buffer too short for parsing! Need %d bytes, but len is only %d\n", + __func__, p.pl, len); + return -1; + } + + pr_debug("%s(), not impl\n", __func__); + + return p.pl+2; /* Extracted pl+2 bytes */ +} + +/* + * Function irda_param_pack (skb, fmt, ...) + * + * Format: + * 'i' = 32 bits integer + * 's' = string + * + */ +int irda_param_pack(__u8 *buf, char *fmt, ...) +{ + irda_pv_t arg; + va_list args; + char *p; + int n = 0; + + va_start(args, fmt); + + for (p = fmt; *p != '\0'; p++) { + switch (*p) { + case 'b': /* 8 bits unsigned byte */ + buf[n++] = (__u8)va_arg(args, int); + break; + case 's': /* 16 bits unsigned short */ + arg.i = (__u16)va_arg(args, int); + put_unaligned((__u16)arg.i, (__u16 *)(buf+n)); n+=2; + break; + case 'i': /* 32 bits unsigned integer */ + arg.i = va_arg(args, __u32); + put_unaligned(arg.i, (__u32 *)(buf+n)); n+=4; + break; +#if 0 + case 'c': /* \0 terminated string */ + arg.c = va_arg(args, char *); + strcpy(buf+n, arg.c); + n += strlen(arg.c) + 1; + break; +#endif + default: + va_end(args); + return -1; + } + } + va_end(args); + + return 0; +} +EXPORT_SYMBOL(irda_param_pack); + +/* + * Function irda_param_unpack (skb, fmt, ...) + */ +static int irda_param_unpack(__u8 *buf, char *fmt, ...) +{ + irda_pv_t arg; + va_list args; + char *p; + int n = 0; + + va_start(args, fmt); + + for (p = fmt; *p != '\0'; p++) { + switch (*p) { + case 'b': /* 8 bits byte */ + arg.ip = va_arg(args, __u32 *); + *arg.ip = buf[n++]; + break; + case 's': /* 16 bits short */ + arg.ip = va_arg(args, __u32 *); + *arg.ip = get_unaligned((__u16 *)(buf+n)); n+=2; + break; + case 'i': /* 32 bits unsigned integer */ + arg.ip = va_arg(args, __u32 *); + *arg.ip = get_unaligned((__u32 *)(buf+n)); n+=4; + break; +#if 0 + case 'c': /* \0 terminated string */ + arg.c = va_arg(args, char *); + strcpy(arg.c, buf+n); + n += strlen(arg.c) + 1; + break; +#endif + default: + va_end(args); + return -1; + } + + } + va_end(args); + + return 0; +} + +/* + * Function irda_param_insert (self, pi, buf, len, info) + * + * Insert the specified parameter (pi) into buffer. Returns number of + * bytes inserted + */ +int irda_param_insert(void *self, __u8 pi, __u8 *buf, int len, + pi_param_info_t *info) +{ + const pi_minor_info_t *pi_minor_info; + __u8 pi_minor; + __u8 pi_major; + int type; + int ret = -1; + int n = 0; + + IRDA_ASSERT(buf != NULL, return ret;); + IRDA_ASSERT(info != NULL, return ret;); + + pi_minor = pi & info->pi_mask; + pi_major = pi >> info->pi_major_offset; + + /* Check if the identifier value (pi) is valid */ + if ((pi_major > info->len-1) || + (pi_minor > info->tables[pi_major].len-1)) + { + pr_debug("%s(), no handler for parameter=0x%02x\n", + __func__, pi); + + /* Skip this parameter */ + return -1; + } + + /* Lookup the info on how to parse this parameter */ + pi_minor_info = &info->tables[pi_major].pi_minor_call_table[pi_minor]; + + /* Find expected data type for this parameter identifier (pi)*/ + type = pi_minor_info->type; + + /* Check if handler has been implemented */ + if (!pi_minor_info->func) { + net_info_ratelimited("%s: no handler for pi=%#x\n", + __func__, pi); + /* Skip this parameter */ + return -1; + } + + /* Insert parameter value */ + ret = (*pv_insert_table[type & PV_MASK])(self, buf+n, len, pi, type, + pi_minor_info->func); + return ret; +} +EXPORT_SYMBOL(irda_param_insert); + +/* + * Function irda_param_extract (self, buf, len, info) + * + * Parse all parameters. If len is correct, then everything should be + * safe. Returns the number of bytes that was parsed + * + */ +static int irda_param_extract(void *self, __u8 *buf, int len, + pi_param_info_t *info) +{ + const pi_minor_info_t *pi_minor_info; + __u8 pi_minor; + __u8 pi_major; + int type; + int ret = -1; + int n = 0; + + IRDA_ASSERT(buf != NULL, return ret;); + IRDA_ASSERT(info != NULL, return ret;); + + pi_minor = buf[n] & info->pi_mask; + pi_major = buf[n] >> info->pi_major_offset; + + /* Check if the identifier value (pi) is valid */ + if ((pi_major > info->len-1) || + (pi_minor > info->tables[pi_major].len-1)) + { + pr_debug("%s(), no handler for parameter=0x%02x\n", + __func__, buf[0]); + + /* Skip this parameter */ + return 2 + buf[n + 1]; /* Continue */ + } + + /* Lookup the info on how to parse this parameter */ + pi_minor_info = &info->tables[pi_major].pi_minor_call_table[pi_minor]; + + /* Find expected data type for this parameter identifier (pi)*/ + type = pi_minor_info->type; + + pr_debug("%s(), pi=[%d,%d], type=%d\n", __func__, + pi_major, pi_minor, type); + + /* Check if handler has been implemented */ + if (!pi_minor_info->func) { + net_info_ratelimited("%s: no handler for pi=%#x\n", + __func__, buf[n]); + /* Skip this parameter */ + return 2 + buf[n + 1]; /* Continue */ + } + + /* Parse parameter value */ + ret = (*pv_extract_table[type & PV_MASK])(self, buf+n, len, buf[n], + type, pi_minor_info->func); + return ret; +} + +/* + * Function irda_param_extract_all (self, buf, len, info) + * + * Parse all parameters. If len is correct, then everything should be + * safe. Returns the number of bytes that was parsed + * + */ +int irda_param_extract_all(void *self, __u8 *buf, int len, + pi_param_info_t *info) +{ + int ret = -1; + int n = 0; + + IRDA_ASSERT(buf != NULL, return ret;); + IRDA_ASSERT(info != NULL, return ret;); + + /* + * Parse all parameters. Each parameter must be at least two bytes + * long or else there is no point in trying to parse it + */ + while (len > 2) { + ret = irda_param_extract(self, buf+n, len, info); + if (ret < 0) + return ret; + + n += ret; + len -= ret; + } + return n; +} +EXPORT_SYMBOL(irda_param_extract_all); diff --git a/kernel/net/irda/qos.c b/kernel/net/irda/qos.c new file mode 100644 index 000000000..25ba8509a --- /dev/null +++ b/kernel/net/irda/qos.c @@ -0,0 +1,771 @@ +/********************************************************************* + * + * Filename: qos.c + * Version: 1.0 + * Description: IrLAP QoS parameter negotiation + * Status: Stable + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Tue Sep 9 00:00:26 1997 + * Modified at: Sun Jan 30 14:29:16 2000 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>, + * All Rights Reserved. + * Copyright (c) 2000-2001 Jean Tourrilhes <jt@hpl.hp.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * + ********************************************************************/ + +#include <linux/export.h> + +#include <asm/byteorder.h> + +#include <net/irda/irda.h> +#include <net/irda/parameters.h> +#include <net/irda/qos.h> +#include <net/irda/irlap.h> +#include <net/irda/irlap_frame.h> + +/* + * Maximum values of the baud rate we negotiate with the other end. + * Most often, you don't have to change that, because Linux-IrDA will + * use the maximum offered by the link layer, which usually works fine. + * In some very rare cases, you may want to limit it to lower speeds... + */ +int sysctl_max_baud_rate = 16000000; +/* + * Maximum value of the lap disconnect timer we negotiate with the other end. + * Most often, the value below represent the best compromise, but some user + * may want to keep the LAP alive longer or shorter in case of link failure. + * Remember that the threshold time (early warning) is fixed to 3s... + */ +int sysctl_max_noreply_time = 12; +/* + * Minimum turn time to be applied before transmitting to the peer. + * Nonzero values (usec) are used as lower limit to the per-connection + * mtt value which was announced by the other end during negotiation. + * Might be helpful if the peer device provides too short mtt. + * Default is 10us which means using the unmodified value given by the + * peer except if it's 0 (0 is likely a bug in the other stack). + */ +unsigned int sysctl_min_tx_turn_time = 10; +/* + * Maximum data size to be used in transmission in payload of LAP frame. + * There is a bit of confusion in the IrDA spec : + * The LAP spec defines the payload of a LAP frame (I field) to be + * 2048 bytes max (IrLAP 1.1, chapt 6.6.5, p40). + * On the other hand, the PHY mention frames of 2048 bytes max (IrPHY + * 1.2, chapt 5.3.2.1, p41). But, this number includes the LAP header + * (2 bytes), and CRC (32 bits at 4 Mb/s). So, for the I field (LAP + * payload), that's only 2042 bytes. Oups ! + * My nsc-ircc hardware has troubles receiving 2048 bytes frames at 4 Mb/s, + * so adjust to 2042... I don't know if this bug applies only for 2048 + * bytes frames or all negotiated frame sizes, but you can use the sysctl + * to play with this value anyway. + * Jean II */ +unsigned int sysctl_max_tx_data_size = 2042; +/* + * Maximum transmit window, i.e. number of LAP frames between turn-around. + * This allow to override what the peer told us. Some peers are buggy and + * don't always support what they tell us. + * Jean II */ +unsigned int sysctl_max_tx_window = 7; + +static int irlap_param_baud_rate(void *instance, irda_param_t *param, int get); +static int irlap_param_link_disconnect(void *instance, irda_param_t *parm, + int get); +static int irlap_param_max_turn_time(void *instance, irda_param_t *param, + int get); +static int irlap_param_data_size(void *instance, irda_param_t *param, int get); +static int irlap_param_window_size(void *instance, irda_param_t *param, + int get); +static int irlap_param_additional_bofs(void *instance, irda_param_t *parm, + int get); +static int irlap_param_min_turn_time(void *instance, irda_param_t *param, + int get); + +#ifndef CONFIG_IRDA_DYNAMIC_WINDOW +static __u32 irlap_requested_line_capacity(struct qos_info *qos); +#endif + +static __u32 min_turn_times[] = { 10000, 5000, 1000, 500, 100, 50, 10, 0 }; /* us */ +static __u32 baud_rates[] = { 2400, 9600, 19200, 38400, 57600, 115200, 576000, + 1152000, 4000000, 16000000 }; /* bps */ +static __u32 data_sizes[] = { 64, 128, 256, 512, 1024, 2048 }; /* bytes */ +static __u32 add_bofs[] = { 48, 24, 12, 5, 3, 2, 1, 0 }; /* bytes */ +static __u32 max_turn_times[] = { 500, 250, 100, 50 }; /* ms */ +static __u32 link_disc_times[] = { 3, 8, 12, 16, 20, 25, 30, 40 }; /* secs */ + +static __u32 max_line_capacities[10][4] = { + /* 500 ms 250 ms 100 ms 50 ms (max turn time) */ + { 100, 0, 0, 0 }, /* 2400 bps */ + { 400, 0, 0, 0 }, /* 9600 bps */ + { 800, 0, 0, 0 }, /* 19200 bps */ + { 1600, 0, 0, 0 }, /* 38400 bps */ + { 2360, 0, 0, 0 }, /* 57600 bps */ + { 4800, 2400, 960, 480 }, /* 115200 bps */ + { 28800, 11520, 5760, 2880 }, /* 576000 bps */ + { 57600, 28800, 11520, 5760 }, /* 1152000 bps */ + { 200000, 100000, 40000, 20000 }, /* 4000000 bps */ + { 800000, 400000, 160000, 80000 }, /* 16000000 bps */ +}; + +static const pi_minor_info_t pi_minor_call_table_type_0[] = { + { NULL, 0 }, +/* 01 */{ irlap_param_baud_rate, PV_INTEGER | PV_LITTLE_ENDIAN }, + { NULL, 0 }, + { NULL, 0 }, + { NULL, 0 }, + { NULL, 0 }, + { NULL, 0 }, + { NULL, 0 }, +/* 08 */{ irlap_param_link_disconnect, PV_INT_8_BITS } +}; + +static const pi_minor_info_t pi_minor_call_table_type_1[] = { + { NULL, 0 }, + { NULL, 0 }, +/* 82 */{ irlap_param_max_turn_time, PV_INT_8_BITS }, +/* 83 */{ irlap_param_data_size, PV_INT_8_BITS }, +/* 84 */{ irlap_param_window_size, PV_INT_8_BITS }, +/* 85 */{ irlap_param_additional_bofs, PV_INT_8_BITS }, +/* 86 */{ irlap_param_min_turn_time, PV_INT_8_BITS }, +}; + +static const pi_major_info_t pi_major_call_table[] = { + { pi_minor_call_table_type_0, 9 }, + { pi_minor_call_table_type_1, 7 }, +}; + +static pi_param_info_t irlap_param_info = { pi_major_call_table, 2, 0x7f, 7 }; + +/* ---------------------- LOCAL SUBROUTINES ---------------------- */ +/* Note : we start with a bunch of local subroutines. + * As the compiler is "one pass", this is the only way to get them to + * inline properly... + * Jean II + */ +/* + * Function value_index (value, array, size) + * + * Returns the index to the value in the specified array + */ +static inline int value_index(__u32 value, __u32 *array, int size) +{ + int i; + + for (i=0; i < size; i++) + if (array[i] == value) + break; + return i; +} + +/* + * Function index_value (index, array) + * + * Returns value to index in array, easy! + * + */ +static inline __u32 index_value(int index, __u32 *array) +{ + return array[index]; +} + +/* + * Function msb_index (word) + * + * Returns index to most significant bit (MSB) in word + * + */ +static int msb_index (__u16 word) +{ + __u16 msb = 0x8000; + int index = 15; /* Current MSB */ + + /* Check for buggy peers. + * Note : there is a small probability that it could be us, but I + * would expect driver authors to catch that pretty early and be + * able to check precisely what's going on. If a end user sees this, + * it's very likely the peer. - Jean II */ + if (word == 0) { + net_warn_ratelimited("%s(), Detected buggy peer, adjust null PV to 0x1!\n", + __func__); + /* The only safe choice (we don't know the array size) */ + word = 0x1; + } + + while (msb) { + if (word & msb) + break; /* Found it! */ + msb >>=1; + index--; + } + return index; +} + +/* + * Function value_lower_bits (value, array) + * + * Returns a bit field marking all possibility lower than value. + */ +static inline int value_lower_bits(__u32 value, __u32 *array, int size, __u16 *field) +{ + int i; + __u16 mask = 0x1; + __u16 result = 0x0; + + for (i=0; i < size; i++) { + /* Add the current value to the bit field, shift mask */ + result |= mask; + mask <<= 1; + /* Finished ? */ + if (array[i] >= value) + break; + } + /* Send back a valid index */ + if(i >= size) + i = size - 1; /* Last item */ + *field = result; + return i; +} + +/* + * Function value_highest_bit (value, array) + * + * Returns a bit field marking the highest possibility lower than value. + */ +static inline int value_highest_bit(__u32 value, __u32 *array, int size, __u16 *field) +{ + int i; + __u16 mask = 0x1; + __u16 result = 0x0; + + for (i=0; i < size; i++) { + /* Finished ? */ + if (array[i] <= value) + break; + /* Shift mask */ + mask <<= 1; + } + /* Set the current value to the bit field */ + result |= mask; + /* Send back a valid index */ + if(i >= size) + i = size - 1; /* Last item */ + *field = result; + return i; +} + +/* -------------------------- MAIN CALLS -------------------------- */ + +/* + * Function irda_qos_compute_intersection (qos, new) + * + * Compute the intersection of the old QoS capabilities with new ones + * + */ +void irda_qos_compute_intersection(struct qos_info *qos, struct qos_info *new) +{ + IRDA_ASSERT(qos != NULL, return;); + IRDA_ASSERT(new != NULL, return;); + + /* Apply */ + qos->baud_rate.bits &= new->baud_rate.bits; + qos->window_size.bits &= new->window_size.bits; + qos->min_turn_time.bits &= new->min_turn_time.bits; + qos->max_turn_time.bits &= new->max_turn_time.bits; + qos->data_size.bits &= new->data_size.bits; + qos->link_disc_time.bits &= new->link_disc_time.bits; + qos->additional_bofs.bits &= new->additional_bofs.bits; + + irda_qos_bits_to_value(qos); +} + +/* + * Function irda_init_max_qos_capabilies (qos) + * + * The purpose of this function is for layers and drivers to be able to + * set the maximum QoS possible and then "and in" their own limitations + * + */ +void irda_init_max_qos_capabilies(struct qos_info *qos) +{ + int i; + /* + * These are the maximum supported values as specified on pages + * 39-43 in IrLAP + */ + + /* Use sysctl to set some configurable values... */ + /* Set configured max speed */ + i = value_lower_bits(sysctl_max_baud_rate, baud_rates, 10, + &qos->baud_rate.bits); + sysctl_max_baud_rate = index_value(i, baud_rates); + + /* Set configured max disc time */ + i = value_lower_bits(sysctl_max_noreply_time, link_disc_times, 8, + &qos->link_disc_time.bits); + sysctl_max_noreply_time = index_value(i, link_disc_times); + + /* LSB is first byte, MSB is second byte */ + qos->baud_rate.bits &= 0x03ff; + + qos->window_size.bits = 0x7f; + qos->min_turn_time.bits = 0xff; + qos->max_turn_time.bits = 0x0f; + qos->data_size.bits = 0x3f; + qos->link_disc_time.bits &= 0xff; + qos->additional_bofs.bits = 0xff; +} +EXPORT_SYMBOL(irda_init_max_qos_capabilies); + +/* + * Function irlap_adjust_qos_settings (qos) + * + * Adjust QoS settings in case some values are not possible to use because + * of other settings + */ +static void irlap_adjust_qos_settings(struct qos_info *qos) +{ + __u32 line_capacity; + int index; + + /* + * Make sure the mintt is sensible. + * Main culprit : Ericsson T39. - Jean II + */ + if (sysctl_min_tx_turn_time > qos->min_turn_time.value) { + int i; + + net_warn_ratelimited("%s(), Detected buggy peer, adjust mtt to %dus!\n", + __func__, sysctl_min_tx_turn_time); + + /* We don't really need bits, but easier this way */ + i = value_highest_bit(sysctl_min_tx_turn_time, min_turn_times, + 8, &qos->min_turn_time.bits); + sysctl_min_tx_turn_time = index_value(i, min_turn_times); + qos->min_turn_time.value = sysctl_min_tx_turn_time; + } + + /* + * Not allowed to use a max turn time less than 500 ms if the baudrate + * is less than 115200 + */ + if ((qos->baud_rate.value < 115200) && + (qos->max_turn_time.value < 500)) + { + pr_debug("%s(), adjusting max turn time from %d to 500 ms\n", + __func__, qos->max_turn_time.value); + qos->max_turn_time.value = 500; + } + + /* + * The data size must be adjusted according to the baud rate and max + * turn time + */ + index = value_index(qos->data_size.value, data_sizes, 6); + line_capacity = irlap_max_line_capacity(qos->baud_rate.value, + qos->max_turn_time.value); + +#ifdef CONFIG_IRDA_DYNAMIC_WINDOW + while ((qos->data_size.value > line_capacity) && (index > 0)) { + qos->data_size.value = data_sizes[index--]; + pr_debug("%s(), reducing data size to %d\n", + __func__, qos->data_size.value); + } +#else /* Use method described in section 6.6.11 of IrLAP */ + while (irlap_requested_line_capacity(qos) > line_capacity) { + IRDA_ASSERT(index != 0, return;); + + /* Must be able to send at least one frame */ + if (qos->window_size.value > 1) { + qos->window_size.value--; + pr_debug("%s(), reducing window size to %d\n", + __func__, qos->window_size.value); + } else if (index > 1) { + qos->data_size.value = data_sizes[index--]; + pr_debug("%s(), reducing data size to %d\n", + __func__, qos->data_size.value); + } else { + net_warn_ratelimited("%s(), nothing more we can do!\n", + __func__); + } + } +#endif /* CONFIG_IRDA_DYNAMIC_WINDOW */ + /* + * Fix tx data size according to user limits - Jean II + */ + if (qos->data_size.value > sysctl_max_tx_data_size) + /* Allow non discrete adjustement to avoid losing capacity */ + qos->data_size.value = sysctl_max_tx_data_size; + /* + * Override Tx window if user request it. - Jean II + */ + if (qos->window_size.value > sysctl_max_tx_window) + qos->window_size.value = sysctl_max_tx_window; +} + +/* + * Function irlap_negotiate (qos_device, qos_session, skb) + * + * Negotiate QoS values, not really that much negotiation :-) + * We just set the QoS capabilities for the peer station + * + */ +int irlap_qos_negotiate(struct irlap_cb *self, struct sk_buff *skb) +{ + int ret; + + ret = irda_param_extract_all(self, skb->data, skb->len, + &irlap_param_info); + + /* Convert the negotiated bits to values */ + irda_qos_bits_to_value(&self->qos_tx); + irda_qos_bits_to_value(&self->qos_rx); + + irlap_adjust_qos_settings(&self->qos_tx); + + pr_debug("Setting BAUD_RATE to %d bps.\n", + self->qos_tx.baud_rate.value); + pr_debug("Setting DATA_SIZE to %d bytes\n", + self->qos_tx.data_size.value); + pr_debug("Setting WINDOW_SIZE to %d\n", + self->qos_tx.window_size.value); + pr_debug("Setting XBOFS to %d\n", + self->qos_tx.additional_bofs.value); + pr_debug("Setting MAX_TURN_TIME to %d ms.\n", + self->qos_tx.max_turn_time.value); + pr_debug("Setting MIN_TURN_TIME to %d usecs.\n", + self->qos_tx.min_turn_time.value); + pr_debug("Setting LINK_DISC to %d secs.\n", + self->qos_tx.link_disc_time.value); + return ret; +} + +/* + * Function irlap_insert_negotiation_params (qos, fp) + * + * Insert QoS negotiaion pararameters into frame + * + */ +int irlap_insert_qos_negotiation_params(struct irlap_cb *self, + struct sk_buff *skb) +{ + int ret; + + /* Insert data rate */ + ret = irda_param_insert(self, PI_BAUD_RATE, skb_tail_pointer(skb), + skb_tailroom(skb), &irlap_param_info); + if (ret < 0) + return ret; + skb_put(skb, ret); + + /* Insert max turnaround time */ + ret = irda_param_insert(self, PI_MAX_TURN_TIME, skb_tail_pointer(skb), + skb_tailroom(skb), &irlap_param_info); + if (ret < 0) + return ret; + skb_put(skb, ret); + + /* Insert data size */ + ret = irda_param_insert(self, PI_DATA_SIZE, skb_tail_pointer(skb), + skb_tailroom(skb), &irlap_param_info); + if (ret < 0) + return ret; + skb_put(skb, ret); + + /* Insert window size */ + ret = irda_param_insert(self, PI_WINDOW_SIZE, skb_tail_pointer(skb), + skb_tailroom(skb), &irlap_param_info); + if (ret < 0) + return ret; + skb_put(skb, ret); + + /* Insert additional BOFs */ + ret = irda_param_insert(self, PI_ADD_BOFS, skb_tail_pointer(skb), + skb_tailroom(skb), &irlap_param_info); + if (ret < 0) + return ret; + skb_put(skb, ret); + + /* Insert minimum turnaround time */ + ret = irda_param_insert(self, PI_MIN_TURN_TIME, skb_tail_pointer(skb), + skb_tailroom(skb), &irlap_param_info); + if (ret < 0) + return ret; + skb_put(skb, ret); + + /* Insert link disconnect/threshold time */ + ret = irda_param_insert(self, PI_LINK_DISC, skb_tail_pointer(skb), + skb_tailroom(skb), &irlap_param_info); + if (ret < 0) + return ret; + skb_put(skb, ret); + + return 0; +} + +/* + * Function irlap_param_baud_rate (instance, param, get) + * + * Negotiate data-rate + * + */ +static int irlap_param_baud_rate(void *instance, irda_param_t *param, int get) +{ + __u16 final; + + struct irlap_cb *self = (struct irlap_cb *) instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); + + if (get) { + param->pv.i = self->qos_rx.baud_rate.bits; + pr_debug("%s(), baud rate = 0x%02x\n", + __func__, param->pv.i); + } else { + /* + * Stations must agree on baud rate, so calculate + * intersection + */ + pr_debug("Requested BAUD_RATE: 0x%04x\n", (__u16)param->pv.i); + final = (__u16) param->pv.i & self->qos_rx.baud_rate.bits; + + pr_debug("Final BAUD_RATE: 0x%04x\n", final); + self->qos_tx.baud_rate.bits = final; + self->qos_rx.baud_rate.bits = final; + } + + return 0; +} + +/* + * Function irlap_param_link_disconnect (instance, param, get) + * + * Negotiate link disconnect/threshold time. + * + */ +static int irlap_param_link_disconnect(void *instance, irda_param_t *param, + int get) +{ + __u16 final; + + struct irlap_cb *self = (struct irlap_cb *) instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); + + if (get) + param->pv.i = self->qos_rx.link_disc_time.bits; + else { + /* + * Stations must agree on link disconnect/threshold + * time. + */ + pr_debug("LINK_DISC: %02x\n", (__u8)param->pv.i); + final = (__u8) param->pv.i & self->qos_rx.link_disc_time.bits; + + pr_debug("Final LINK_DISC: %02x\n", final); + self->qos_tx.link_disc_time.bits = final; + self->qos_rx.link_disc_time.bits = final; + } + return 0; +} + +/* + * Function irlap_param_max_turn_time (instance, param, get) + * + * Negotiate the maximum turnaround time. This is a type 1 parameter and + * will be negotiated independently for each station + * + */ +static int irlap_param_max_turn_time(void *instance, irda_param_t *param, + int get) +{ + struct irlap_cb *self = (struct irlap_cb *) instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); + + if (get) + param->pv.i = self->qos_rx.max_turn_time.bits; + else + self->qos_tx.max_turn_time.bits = (__u8) param->pv.i; + + return 0; +} + +/* + * Function irlap_param_data_size (instance, param, get) + * + * Negotiate the data size. This is a type 1 parameter and + * will be negotiated independently for each station + * + */ +static int irlap_param_data_size(void *instance, irda_param_t *param, int get) +{ + struct irlap_cb *self = (struct irlap_cb *) instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); + + if (get) + param->pv.i = self->qos_rx.data_size.bits; + else + self->qos_tx.data_size.bits = (__u8) param->pv.i; + + return 0; +} + +/* + * Function irlap_param_window_size (instance, param, get) + * + * Negotiate the window size. This is a type 1 parameter and + * will be negotiated independently for each station + * + */ +static int irlap_param_window_size(void *instance, irda_param_t *param, + int get) +{ + struct irlap_cb *self = (struct irlap_cb *) instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); + + if (get) + param->pv.i = self->qos_rx.window_size.bits; + else + self->qos_tx.window_size.bits = (__u8) param->pv.i; + + return 0; +} + +/* + * Function irlap_param_additional_bofs (instance, param, get) + * + * Negotiate additional BOF characters. This is a type 1 parameter and + * will be negotiated independently for each station. + */ +static int irlap_param_additional_bofs(void *instance, irda_param_t *param, int get) +{ + struct irlap_cb *self = (struct irlap_cb *) instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); + + if (get) + param->pv.i = self->qos_rx.additional_bofs.bits; + else + self->qos_tx.additional_bofs.bits = (__u8) param->pv.i; + + return 0; +} + +/* + * Function irlap_param_min_turn_time (instance, param, get) + * + * Negotiate the minimum turn around time. This is a type 1 parameter and + * will be negotiated independently for each station + */ +static int irlap_param_min_turn_time(void *instance, irda_param_t *param, + int get) +{ + struct irlap_cb *self = (struct irlap_cb *) instance; + + IRDA_ASSERT(self != NULL, return -1;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return -1;); + + if (get) + param->pv.i = self->qos_rx.min_turn_time.bits; + else + self->qos_tx.min_turn_time.bits = (__u8) param->pv.i; + + return 0; +} + +/* + * Function irlap_max_line_capacity (speed, max_turn_time, min_turn_time) + * + * Calculate the maximum line capacity + * + */ +__u32 irlap_max_line_capacity(__u32 speed, __u32 max_turn_time) +{ + __u32 line_capacity; + int i,j; + + pr_debug("%s(), speed=%d, max_turn_time=%d\n", + __func__, speed, max_turn_time); + + i = value_index(speed, baud_rates, 10); + j = value_index(max_turn_time, max_turn_times, 4); + + IRDA_ASSERT(((i >=0) && (i <10)), return 0;); + IRDA_ASSERT(((j >=0) && (j <4)), return 0;); + + line_capacity = max_line_capacities[i][j]; + + pr_debug("%s(), line capacity=%d bytes\n", + __func__, line_capacity); + + return line_capacity; +} + +#ifndef CONFIG_IRDA_DYNAMIC_WINDOW +static __u32 irlap_requested_line_capacity(struct qos_info *qos) +{ + __u32 line_capacity; + + line_capacity = qos->window_size.value * + (qos->data_size.value + 6 + qos->additional_bofs.value) + + irlap_min_turn_time_in_bytes(qos->baud_rate.value, + qos->min_turn_time.value); + + pr_debug("%s(), requested line capacity=%d\n", + __func__, line_capacity); + + return line_capacity; +} +#endif + +void irda_qos_bits_to_value(struct qos_info *qos) +{ + int index; + + IRDA_ASSERT(qos != NULL, return;); + + index = msb_index(qos->baud_rate.bits); + qos->baud_rate.value = baud_rates[index]; + + index = msb_index(qos->data_size.bits); + qos->data_size.value = data_sizes[index]; + + index = msb_index(qos->window_size.bits); + qos->window_size.value = index+1; + + index = msb_index(qos->min_turn_time.bits); + qos->min_turn_time.value = min_turn_times[index]; + + index = msb_index(qos->max_turn_time.bits); + qos->max_turn_time.value = max_turn_times[index]; + + index = msb_index(qos->link_disc_time.bits); + qos->link_disc_time.value = link_disc_times[index]; + + index = msb_index(qos->additional_bofs.bits); + qos->additional_bofs.value = add_bofs[index]; +} +EXPORT_SYMBOL(irda_qos_bits_to_value); diff --git a/kernel/net/irda/timer.c b/kernel/net/irda/timer.c new file mode 100644 index 000000000..0c4c115a5 --- /dev/null +++ b/kernel/net/irda/timer.c @@ -0,0 +1,231 @@ +/********************************************************************* + * + * Filename: timer.c + * Version: + * Description: + * Status: Experimental. + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Sat Aug 16 00:59:29 1997 + * Modified at: Wed Dec 8 12:50:34 1999 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1997, 1999 Dag Brattli <dagb@cs.uit.no>, + * All Rights Reserved. + * Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/delay.h> + +#include <net/irda/timer.h> +#include <net/irda/irda.h> +#include <net/irda/irda_device.h> +#include <net/irda/irlap.h> +#include <net/irda/irlmp.h> + +extern int sysctl_slot_timeout; + +static void irlap_slot_timer_expired(void* data); +static void irlap_query_timer_expired(void* data); +static void irlap_final_timer_expired(void* data); +static void irlap_wd_timer_expired(void* data); +static void irlap_backoff_timer_expired(void* data); +static void irlap_media_busy_expired(void* data); + +void irlap_start_slot_timer(struct irlap_cb *self, int timeout) +{ + irda_start_timer(&self->slot_timer, timeout, (void *) self, + irlap_slot_timer_expired); +} + +void irlap_start_query_timer(struct irlap_cb *self, int S, int s) +{ + int timeout; + + /* Calculate when the peer discovery should end. Normally, we + * get the end-of-discovery frame, so this is just in case + * we miss it. + * Basically, we multiply the number of remaining slots by our + * slot time, plus add some extra time to properly receive the last + * discovery packet (which is longer due to extra discovery info), + * to avoid messing with for incoming connections requests and + * to accommodate devices that perform discovery slower than us. + * Jean II */ + timeout = ((sysctl_slot_timeout * HZ / 1000) * (S - s) + + XIDEXTRA_TIMEOUT + SMALLBUSY_TIMEOUT); + + /* Set or re-set the timer. We reset the timer for each received + * discovery query, which allow us to automatically adjust to + * the speed of the peer discovery (faster or slower). Jean II */ + irda_start_timer( &self->query_timer, timeout, (void *) self, + irlap_query_timer_expired); +} + +void irlap_start_final_timer(struct irlap_cb *self, int timeout) +{ + irda_start_timer(&self->final_timer, timeout, (void *) self, + irlap_final_timer_expired); +} + +void irlap_start_wd_timer(struct irlap_cb *self, int timeout) +{ + irda_start_timer(&self->wd_timer, timeout, (void *) self, + irlap_wd_timer_expired); +} + +void irlap_start_backoff_timer(struct irlap_cb *self, int timeout) +{ + irda_start_timer(&self->backoff_timer, timeout, (void *) self, + irlap_backoff_timer_expired); +} + +void irlap_start_mbusy_timer(struct irlap_cb *self, int timeout) +{ + irda_start_timer(&self->media_busy_timer, timeout, + (void *) self, irlap_media_busy_expired); +} + +void irlap_stop_mbusy_timer(struct irlap_cb *self) +{ + /* If timer is activated, kill it! */ + del_timer(&self->media_busy_timer); + + /* If we are in NDM, there is a bunch of events in LAP that + * that be pending due to the media_busy condition, such as + * CONNECT_REQUEST and SEND_UI_FRAME. If we don't generate + * an event, they will wait forever... + * Jean II */ + if (self->state == LAP_NDM) + irlap_do_event(self, MEDIA_BUSY_TIMER_EXPIRED, NULL, NULL); +} + +void irlmp_start_watchdog_timer(struct lsap_cb *self, int timeout) +{ + irda_start_timer(&self->watchdog_timer, timeout, (void *) self, + irlmp_watchdog_timer_expired); +} + +void irlmp_start_discovery_timer(struct irlmp_cb *self, int timeout) +{ + irda_start_timer(&self->discovery_timer, timeout, (void *) self, + irlmp_discovery_timer_expired); +} + +void irlmp_start_idle_timer(struct lap_cb *self, int timeout) +{ + irda_start_timer(&self->idle_timer, timeout, (void *) self, + irlmp_idle_timer_expired); +} + +void irlmp_stop_idle_timer(struct lap_cb *self) +{ + /* If timer is activated, kill it! */ + del_timer(&self->idle_timer); +} + +/* + * Function irlap_slot_timer_expired (data) + * + * IrLAP slot timer has expired + * + */ +static void irlap_slot_timer_expired(void *data) +{ + struct irlap_cb *self = (struct irlap_cb *) data; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + irlap_do_event(self, SLOT_TIMER_EXPIRED, NULL, NULL); +} + +/* + * Function irlap_query_timer_expired (data) + * + * IrLAP query timer has expired + * + */ +static void irlap_query_timer_expired(void *data) +{ + struct irlap_cb *self = (struct irlap_cb *) data; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + irlap_do_event(self, QUERY_TIMER_EXPIRED, NULL, NULL); +} + +/* + * Function irda_final_timer_expired (data) + * + * + * + */ +static void irlap_final_timer_expired(void *data) +{ + struct irlap_cb *self = (struct irlap_cb *) data; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + irlap_do_event(self, FINAL_TIMER_EXPIRED, NULL, NULL); +} + +/* + * Function irda_wd_timer_expired (data) + * + * + * + */ +static void irlap_wd_timer_expired(void *data) +{ + struct irlap_cb *self = (struct irlap_cb *) data; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + irlap_do_event(self, WD_TIMER_EXPIRED, NULL, NULL); +} + +/* + * Function irda_backoff_timer_expired (data) + * + * + * + */ +static void irlap_backoff_timer_expired(void *data) +{ + struct irlap_cb *self = (struct irlap_cb *) data; + + IRDA_ASSERT(self != NULL, return;); + IRDA_ASSERT(self->magic == LAP_MAGIC, return;); + + irlap_do_event(self, BACKOFF_TIMER_EXPIRED, NULL, NULL); +} + + +/* + * Function irtty_media_busy_expired (data) + * + * + */ +static void irlap_media_busy_expired(void *data) +{ + struct irlap_cb *self = (struct irlap_cb *) data; + + IRDA_ASSERT(self != NULL, return;); + + irda_device_set_media_busy(self->netdev, FALSE); + /* Note : the LAP event will be send in irlap_stop_mbusy_timer(), + * to catch other cases where the flag is cleared (for example + * after a discovery) - Jean II */ +} diff --git a/kernel/net/irda/wrapper.c b/kernel/net/irda/wrapper.c new file mode 100644 index 000000000..40a0f993b --- /dev/null +++ b/kernel/net/irda/wrapper.c @@ -0,0 +1,492 @@ +/********************************************************************* + * + * Filename: wrapper.c + * Version: 1.2 + * Description: IrDA SIR async wrapper layer + * Status: Stable + * Author: Dag Brattli <dagb@cs.uit.no> + * Created at: Mon Aug 4 20:40:53 1997 + * Modified at: Fri Jan 28 13:21:09 2000 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * Modified at: Fri May 28 3:11 CST 1999 + * Modified by: Horst von Brand <vonbrand@sleipnir.valparaiso.cl> + * + * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>, + * All Rights Reserved. + * Copyright (c) 2000-2002 Jean Tourrilhes <jt@hpl.hp.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsø admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#include <linux/skbuff.h> +#include <linux/string.h> +#include <linux/module.h> +#include <asm/byteorder.h> + +#include <net/irda/irda.h> +#include <net/irda/wrapper.h> +#include <net/irda/crc.h> +#include <net/irda/irlap.h> +#include <net/irda/irlap_frame.h> +#include <net/irda/irda_device.h> + +/************************** FRAME WRAPPING **************************/ +/* + * Unwrap and unstuff SIR frames + * + * Note : at FIR and MIR, HDLC framing is used and usually handled + * by the controller, so we come here only for SIR... Jean II + */ + +/* + * Function stuff_byte (byte, buf) + * + * Byte stuff one single byte and put the result in buffer pointed to by + * buf. The buffer must at all times be able to have two bytes inserted. + * + * This is in a tight loop, better inline it, so need to be prior to callers. + * (2000 bytes on P6 200MHz, non-inlined ~370us, inline ~170us) - Jean II + */ +static inline int stuff_byte(__u8 byte, __u8 *buf) +{ + switch (byte) { + case BOF: /* FALLTHROUGH */ + case EOF: /* FALLTHROUGH */ + case CE: + /* Insert transparently coded */ + buf[0] = CE; /* Send link escape */ + buf[1] = byte^IRDA_TRANS; /* Complement bit 5 */ + return 2; + /* break; */ + default: + /* Non-special value, no transparency required */ + buf[0] = byte; + return 1; + /* break; */ + } +} + +/* + * Function async_wrap (skb, *tx_buff, buffsize) + * + * Makes a new buffer with wrapping and stuffing, should check that + * we don't get tx buffer overflow. + */ +int async_wrap_skb(struct sk_buff *skb, __u8 *tx_buff, int buffsize) +{ + struct irda_skb_cb *cb = (struct irda_skb_cb *) skb->cb; + int xbofs; + int i; + int n; + union { + __u16 value; + __u8 bytes[2]; + } fcs; + + /* Initialize variables */ + fcs.value = INIT_FCS; + n = 0; + + /* + * Send XBOF's for required min. turn time and for the negotiated + * additional XBOFS + */ + + if (cb->magic != LAP_MAGIC) { + /* + * This will happen for all frames sent from user-space. + * Nothing to worry about, but we set the default number of + * BOF's + */ + pr_debug("%s(), wrong magic in skb!\n", __func__); + xbofs = 10; + } else + xbofs = cb->xbofs + cb->xbofs_delay; + + pr_debug("%s(), xbofs=%d\n", __func__, xbofs); + + /* Check that we never use more than 115 + 48 xbofs */ + if (xbofs > 163) { + pr_debug("%s(), too many xbofs (%d)\n", __func__, + xbofs); + xbofs = 163; + } + + memset(tx_buff + n, XBOF, xbofs); + n += xbofs; + + /* Start of packet character BOF */ + tx_buff[n++] = BOF; + + /* Insert frame and calc CRC */ + for (i=0; i < skb->len; i++) { + /* + * Check for the possibility of tx buffer overflow. We use + * bufsize-5 since the maximum number of bytes that can be + * transmitted after this point is 5. + */ + if(n >= (buffsize-5)) { + net_err_ratelimited("%s(), tx buffer overflow (n=%d)\n", + __func__, n); + return n; + } + + n += stuff_byte(skb->data[i], tx_buff+n); + fcs.value = irda_fcs(fcs.value, skb->data[i]); + } + + /* Insert CRC in little endian format (LSB first) */ + fcs.value = ~fcs.value; +#ifdef __LITTLE_ENDIAN + n += stuff_byte(fcs.bytes[0], tx_buff+n); + n += stuff_byte(fcs.bytes[1], tx_buff+n); +#else /* ifdef __BIG_ENDIAN */ + n += stuff_byte(fcs.bytes[1], tx_buff+n); + n += stuff_byte(fcs.bytes[0], tx_buff+n); +#endif + tx_buff[n++] = EOF; + + return n; +} +EXPORT_SYMBOL(async_wrap_skb); + +/************************* FRAME UNWRAPPING *************************/ +/* + * Unwrap and unstuff SIR frames + * + * Complete rewrite by Jean II : + * More inline, faster, more compact, more logical. Jean II + * (16 bytes on P6 200MHz, old 5 to 7 us, new 4 to 6 us) + * (24 bytes on P6 200MHz, old 9 to 10 us, new 7 to 8 us) + * (for reference, 115200 b/s is 1 byte every 69 us) + * And reduce wrapper.o by ~900B in the process ;-) + * + * Then, we have the addition of ZeroCopy, which is optional + * (i.e. the driver must initiate it) and improve final processing. + * (2005 B frame + EOF on P6 200MHz, without 30 to 50 us, with 10 to 25 us) + * + * Note : at FIR and MIR, HDLC framing is used and usually handled + * by the controller, so we come here only for SIR... Jean II + */ + +/* + * We can also choose where we want to do the CRC calculation. We can + * do it "inline", as we receive the bytes, or "postponed", when + * receiving the End-Of-Frame. + * (16 bytes on P6 200MHz, inlined 4 to 6 us, postponed 4 to 5 us) + * (24 bytes on P6 200MHz, inlined 7 to 8 us, postponed 5 to 7 us) + * With ZeroCopy : + * (2005 B frame on P6 200MHz, inlined 10 to 25 us, postponed 140 to 180 us) + * Without ZeroCopy : + * (2005 B frame on P6 200MHz, inlined 30 to 50 us, postponed 150 to 180 us) + * (Note : numbers taken with irq disabled) + * + * From those numbers, it's not clear which is the best strategy, because + * we end up running through a lot of data one way or another (i.e. cache + * misses). I personally prefer to avoid the huge latency spike of the + * "postponed" solution, because it come just at the time when we have + * lot's of protocol processing to do and it will hurt our ability to + * reach low link turnaround times... Jean II + */ +//#define POSTPONE_RX_CRC + +/* + * Function async_bump (buf, len, stats) + * + * Got a frame, make a copy of it, and pass it up the stack! We can try + * to inline it since it's only called from state_inside_frame + */ +static inline void +async_bump(struct net_device *dev, + struct net_device_stats *stats, + iobuff_t *rx_buff) +{ + struct sk_buff *newskb; + struct sk_buff *dataskb; + int docopy; + + /* Check if we need to copy the data to a new skb or not. + * If the driver doesn't use ZeroCopy Rx, we have to do it. + * With ZeroCopy Rx, the rx_buff already point to a valid + * skb. But, if the frame is small, it is more efficient to + * copy it to save memory (copy will be fast anyway - that's + * called Rx-copy-break). Jean II */ + docopy = ((rx_buff->skb == NULL) || + (rx_buff->len < IRDA_RX_COPY_THRESHOLD)); + + /* Allocate a new skb */ + newskb = dev_alloc_skb(docopy ? rx_buff->len + 1 : rx_buff->truesize); + if (!newskb) { + stats->rx_dropped++; + /* We could deliver the current skb if doing ZeroCopy Rx, + * but this would stall the Rx path. Better drop the + * packet... Jean II */ + return; + } + + /* Align IP header to 20 bytes (i.e. increase skb->data) + * Note this is only useful with IrLAN, as PPP has a variable + * header size (2 or 1 bytes) - Jean II */ + skb_reserve(newskb, 1); + + if(docopy) { + /* Copy data without CRC (length already checked) */ + skb_copy_to_linear_data(newskb, rx_buff->data, + rx_buff->len - 2); + /* Deliver this skb */ + dataskb = newskb; + } else { + /* We are using ZeroCopy. Deliver old skb */ + dataskb = rx_buff->skb; + /* And hook the new skb to the rx_buff */ + rx_buff->skb = newskb; + rx_buff->head = newskb->data; /* NOT newskb->head */ + //printk(KERN_DEBUG "ZeroCopy : len = %d, dataskb = %p, newskb = %p\n", rx_buff->len, dataskb, newskb); + } + + /* Set proper length on skb (without CRC) */ + skb_put(dataskb, rx_buff->len - 2); + + /* Feed it to IrLAP layer */ + dataskb->dev = dev; + skb_reset_mac_header(dataskb); + dataskb->protocol = htons(ETH_P_IRDA); + + netif_rx(dataskb); + + stats->rx_packets++; + stats->rx_bytes += rx_buff->len; + + /* Clean up rx_buff (redundant with async_unwrap_bof() ???) */ + rx_buff->data = rx_buff->head; + rx_buff->len = 0; +} + +/* + * Function async_unwrap_bof(dev, byte) + * + * Handle Beginning Of Frame character received within a frame + * + */ +static inline void +async_unwrap_bof(struct net_device *dev, + struct net_device_stats *stats, + iobuff_t *rx_buff, __u8 byte) +{ + switch(rx_buff->state) { + case LINK_ESCAPE: + case INSIDE_FRAME: + /* Not supposed to happen, the previous frame is not + * finished - Jean II */ + pr_debug("%s(), Discarding incomplete frame\n", + __func__); + stats->rx_errors++; + stats->rx_missed_errors++; + irda_device_set_media_busy(dev, TRUE); + break; + + case OUTSIDE_FRAME: + case BEGIN_FRAME: + default: + /* We may receive multiple BOF at the start of frame */ + break; + } + + /* Now receiving frame */ + rx_buff->state = BEGIN_FRAME; + rx_buff->in_frame = TRUE; + + /* Time to initialize receive buffer */ + rx_buff->data = rx_buff->head; + rx_buff->len = 0; + rx_buff->fcs = INIT_FCS; +} + +/* + * Function async_unwrap_eof(dev, byte) + * + * Handle End Of Frame character received within a frame + * + */ +static inline void +async_unwrap_eof(struct net_device *dev, + struct net_device_stats *stats, + iobuff_t *rx_buff, __u8 byte) +{ +#ifdef POSTPONE_RX_CRC + int i; +#endif + + switch(rx_buff->state) { + case OUTSIDE_FRAME: + /* Probably missed the BOF */ + stats->rx_errors++; + stats->rx_missed_errors++; + irda_device_set_media_busy(dev, TRUE); + break; + + case BEGIN_FRAME: + case LINK_ESCAPE: + case INSIDE_FRAME: + default: + /* Note : in the case of BEGIN_FRAME and LINK_ESCAPE, + * the fcs will most likely not match and generate an + * error, as expected - Jean II */ + rx_buff->state = OUTSIDE_FRAME; + rx_buff->in_frame = FALSE; + +#ifdef POSTPONE_RX_CRC + /* If we haven't done the CRC as we receive bytes, we + * must do it now... Jean II */ + for(i = 0; i < rx_buff->len; i++) + rx_buff->fcs = irda_fcs(rx_buff->fcs, + rx_buff->data[i]); +#endif + + /* Test FCS and signal success if the frame is good */ + if (rx_buff->fcs == GOOD_FCS) { + /* Deliver frame */ + async_bump(dev, stats, rx_buff); + break; + } else { + /* Wrong CRC, discard frame! */ + irda_device_set_media_busy(dev, TRUE); + + pr_debug("%s(), crc error\n", __func__); + stats->rx_errors++; + stats->rx_crc_errors++; + } + break; + } +} + +/* + * Function async_unwrap_ce(dev, byte) + * + * Handle Character Escape character received within a frame + * + */ +static inline void +async_unwrap_ce(struct net_device *dev, + struct net_device_stats *stats, + iobuff_t *rx_buff, __u8 byte) +{ + switch(rx_buff->state) { + case OUTSIDE_FRAME: + /* Activate carrier sense */ + irda_device_set_media_busy(dev, TRUE); + break; + + case LINK_ESCAPE: + net_warn_ratelimited("%s: state not defined\n", __func__); + break; + + case BEGIN_FRAME: + case INSIDE_FRAME: + default: + /* Stuffed byte coming */ + rx_buff->state = LINK_ESCAPE; + break; + } +} + +/* + * Function async_unwrap_other(dev, byte) + * + * Handle other characters received within a frame + * + */ +static inline void +async_unwrap_other(struct net_device *dev, + struct net_device_stats *stats, + iobuff_t *rx_buff, __u8 byte) +{ + switch(rx_buff->state) { + /* This is on the critical path, case are ordered by + * probability (most frequent first) - Jean II */ + case INSIDE_FRAME: + /* Must be the next byte of the frame */ + if (rx_buff->len < rx_buff->truesize) { + rx_buff->data[rx_buff->len++] = byte; +#ifndef POSTPONE_RX_CRC + rx_buff->fcs = irda_fcs(rx_buff->fcs, byte); +#endif + } else { + pr_debug("%s(), Rx buffer overflow, aborting\n", + __func__); + rx_buff->state = OUTSIDE_FRAME; + } + break; + + case LINK_ESCAPE: + /* + * Stuffed char, complement bit 5 of byte + * following CE, IrLAP p.114 + */ + byte ^= IRDA_TRANS; + if (rx_buff->len < rx_buff->truesize) { + rx_buff->data[rx_buff->len++] = byte; +#ifndef POSTPONE_RX_CRC + rx_buff->fcs = irda_fcs(rx_buff->fcs, byte); +#endif + rx_buff->state = INSIDE_FRAME; + } else { + pr_debug("%s(), Rx buffer overflow, aborting\n", + __func__); + rx_buff->state = OUTSIDE_FRAME; + } + break; + + case OUTSIDE_FRAME: + /* Activate carrier sense */ + if(byte != XBOF) + irda_device_set_media_busy(dev, TRUE); + break; + + case BEGIN_FRAME: + default: + rx_buff->data[rx_buff->len++] = byte; +#ifndef POSTPONE_RX_CRC + rx_buff->fcs = irda_fcs(rx_buff->fcs, byte); +#endif + rx_buff->state = INSIDE_FRAME; + break; + } +} + +/* + * Function async_unwrap_char (dev, rx_buff, byte) + * + * Parse and de-stuff frame received from the IrDA-port + * + * This is the main entry point for SIR drivers. + */ +void async_unwrap_char(struct net_device *dev, + struct net_device_stats *stats, + iobuff_t *rx_buff, __u8 byte) +{ + switch(byte) { + case CE: + async_unwrap_ce(dev, stats, rx_buff, byte); + break; + case BOF: + async_unwrap_bof(dev, stats, rx_buff, byte); + break; + case EOF: + async_unwrap_eof(dev, stats, rx_buff, byte); + break; + default: + async_unwrap_other(dev, stats, rx_buff, byte); + break; + } +} +EXPORT_SYMBOL(async_unwrap_char); + |