summaryrefslogtreecommitdiffstats
path: root/kernel/include/video/exynos_mipi_dsim.h
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/include/video/exynos_mipi_dsim.h')
-rw-r--r--kernel/include/video/exynos_mipi_dsim.h358
1 files changed, 358 insertions, 0 deletions
diff --git a/kernel/include/video/exynos_mipi_dsim.h b/kernel/include/video/exynos_mipi_dsim.h
new file mode 100644
index 000000000..6a578f8a1
--- /dev/null
+++ b/kernel/include/video/exynos_mipi_dsim.h
@@ -0,0 +1,358 @@
+/* include/video/exynos_mipi_dsim.h
+ *
+ * Platform data header for Samsung SoC MIPI-DSIM.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd
+ *
+ * InKi Dae <inki.dae@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _EXYNOS_MIPI_DSIM_H
+#define _EXYNOS_MIPI_DSIM_H
+
+#include <linux/device.h>
+#include <linux/fb.h>
+
+#define PANEL_NAME_SIZE (32)
+
+/*
+ * Enumerate display interface type.
+ *
+ * DSIM_COMMAND means cpu interface and rgb interface for DSIM_VIDEO.
+ *
+ * P.S. MIPI DSI Master has two display controller intefaces, RGB Interface
+ * for main display and CPU Interface(same as I80 Interface) for main
+ * and sub display.
+ */
+enum mipi_dsim_interface_type {
+ DSIM_COMMAND,
+ DSIM_VIDEO
+};
+
+enum mipi_dsim_virtual_ch_no {
+ DSIM_VIRTUAL_CH_0,
+ DSIM_VIRTUAL_CH_1,
+ DSIM_VIRTUAL_CH_2,
+ DSIM_VIRTUAL_CH_3
+};
+
+enum mipi_dsim_burst_mode_type {
+ DSIM_NON_BURST_SYNC_EVENT,
+ DSIM_BURST_SYNC_EVENT,
+ DSIM_NON_BURST_SYNC_PULSE,
+ DSIM_BURST,
+ DSIM_NON_VIDEO_MODE
+};
+
+enum mipi_dsim_no_of_data_lane {
+ DSIM_DATA_LANE_1,
+ DSIM_DATA_LANE_2,
+ DSIM_DATA_LANE_3,
+ DSIM_DATA_LANE_4
+};
+
+enum mipi_dsim_byte_clk_src {
+ DSIM_PLL_OUT_DIV8,
+ DSIM_EXT_CLK_DIV8,
+ DSIM_EXT_CLK_BYPASS
+};
+
+enum mipi_dsim_pixel_format {
+ DSIM_CMD_3BPP,
+ DSIM_CMD_8BPP,
+ DSIM_CMD_12BPP,
+ DSIM_CMD_16BPP,
+ DSIM_VID_16BPP_565,
+ DSIM_VID_18BPP_666PACKED,
+ DSIM_18BPP_666LOOSELYPACKED,
+ DSIM_24BPP_888
+};
+
+/*
+ * struct mipi_dsim_config - interface for configuring mipi-dsi controller.
+ *
+ * @auto_flush: enable or disable Auto flush of MD FIFO using VSYNC pulse.
+ * @eot_disable: enable or disable EoT packet in HS mode.
+ * @auto_vertical_cnt: specifies auto vertical count mode.
+ * in Video mode, the vertical line transition uses line counter
+ * configured by VSA, VBP, and Vertical resolution.
+ * If this bit is set to '1', the line counter does not use VSA and VBP
+ * registers.(in command mode, this variable is ignored)
+ * @hse: set horizontal sync event mode.
+ * In VSYNC pulse and Vporch area, MIPI DSI master transfers only HSYNC
+ * start packet to MIPI DSI slave at MIPI DSI spec1.1r02.
+ * this bit transfers HSYNC end packet in VSYNC pulse and Vporch area
+ * (in mommand mode, this variable is ignored)
+ * @hfp: specifies HFP disable mode.
+ * if this variable is set, DSI master ignores HFP area in VIDEO mode.
+ * (in command mode, this variable is ignored)
+ * @hbp: specifies HBP disable mode.
+ * if this variable is set, DSI master ignores HBP area in VIDEO mode.
+ * (in command mode, this variable is ignored)
+ * @hsa: specifies HSA disable mode.
+ * if this variable is set, DSI master ignores HSA area in VIDEO mode.
+ * (in command mode, this variable is ignored)
+ * @cma_allow: specifies the number of horizontal lines, where command packet
+ * transmission is allowed after Stable VFP period.
+ * @e_interface: specifies interface to be used.(CPU or RGB interface)
+ * @e_virtual_ch: specifies virtual channel number that main or
+ * sub diaplsy uses.
+ * @e_pixel_format: specifies pixel stream format for main or sub display.
+ * @e_burst_mode: selects Burst mode in Video mode.
+ * in Non-burst mode, RGB data area is filled with RGB data and NULL
+ * packets, according to input bandwidth of RGB interface.
+ * In Burst mode, RGB data area is filled with RGB data only.
+ * @e_no_data_lane: specifies data lane count to be used by Master.
+ * @e_byte_clk: select byte clock source. (it must be DSIM_PLL_OUT_DIV8)
+ * DSIM_EXT_CLK_DIV8 and DSIM_EXT_CLK_BYPASSS are not supported.
+ * @pll_stable_time: specifies the PLL Timer for stability of the ganerated
+ * clock(System clock cycle base)
+ * if the timer value goes to 0x00000000, the clock stable bit of status
+ * and interrupt register is set.
+ * @esc_clk: specifies escape clock frequency for getting the escape clock
+ * prescaler value.
+ * @stop_holding_cnt: specifies the interval value between transmitting
+ * read packet(or write "set_tear_on" command) and BTA request.
+ * after transmitting read packet or write "set_tear_on" command,
+ * BTA requests to D-PHY automatically. this counter value specifies
+ * the interval between them.
+ * @bta_timeout: specifies the timer for BTA.
+ * this register specifies time out from BTA request to change
+ * the direction with respect to Tx escape clock.
+ * @rx_timeout: specifies the timer for LP Rx mode timeout.
+ * this register specifies time out on how long RxValid deasserts,
+ * after RxLpdt asserts with respect to Tx escape clock.
+ * - RxValid specifies Rx data valid indicator.
+ * - RxLpdt specifies an indicator that D-PHY is under RxLpdt mode.
+ * - RxValid and RxLpdt specifies signal from D-PHY.
+ */
+struct mipi_dsim_config {
+ unsigned char auto_flush;
+ unsigned char eot_disable;
+
+ unsigned char auto_vertical_cnt;
+ unsigned char hse;
+ unsigned char hfp;
+ unsigned char hbp;
+ unsigned char hsa;
+ unsigned char cmd_allow;
+
+ enum mipi_dsim_interface_type e_interface;
+ enum mipi_dsim_virtual_ch_no e_virtual_ch;
+ enum mipi_dsim_pixel_format e_pixel_format;
+ enum mipi_dsim_burst_mode_type e_burst_mode;
+ enum mipi_dsim_no_of_data_lane e_no_data_lane;
+ enum mipi_dsim_byte_clk_src e_byte_clk;
+
+ /*
+ * ===========================================
+ * | P | M | S | MHz |
+ * -------------------------------------------
+ * | 3 | 100 | 3 | 100 |
+ * | 3 | 100 | 2 | 200 |
+ * | 3 | 63 | 1 | 252 |
+ * | 4 | 100 | 1 | 300 |
+ * | 4 | 110 | 1 | 330 |
+ * | 12 | 350 | 1 | 350 |
+ * | 3 | 100 | 1 | 400 |
+ * | 4 | 150 | 1 | 450 |
+ * | 6 | 118 | 1 | 472 |
+ * | 3 | 120 | 1 | 480 |
+ * | 12 | 250 | 0 | 500 |
+ * | 4 | 100 | 0 | 600 |
+ * | 3 | 81 | 0 | 648 |
+ * | 3 | 88 | 0 | 704 |
+ * | 3 | 90 | 0 | 720 |
+ * | 3 | 100 | 0 | 800 |
+ * | 12 | 425 | 0 | 850 |
+ * | 4 | 150 | 0 | 900 |
+ * | 12 | 475 | 0 | 950 |
+ * | 6 | 250 | 0 | 1000 |
+ * -------------------------------------------
+ */
+
+ /*
+ * pms could be calculated as the following.
+ * M * 24 / P * 2 ^ S = MHz
+ */
+ unsigned char p;
+ unsigned short m;
+ unsigned char s;
+
+ unsigned int pll_stable_time;
+ unsigned long esc_clk;
+
+ unsigned short stop_holding_cnt;
+ unsigned char bta_timeout;
+ unsigned short rx_timeout;
+};
+
+/*
+ * struct mipi_dsim_device - global interface for mipi-dsi driver.
+ *
+ * @dev: driver model representation of the device.
+ * @id: unique device id.
+ * @clock: pointer to MIPI-DSI clock of clock framework.
+ * @irq: interrupt number to MIPI-DSI controller.
+ * @reg_base: base address to memory mapped SRF of MIPI-DSI controller.
+ * (virtual address)
+ * @lock: the mutex protecting this data structure.
+ * @dsim_info: infomation for configuring mipi-dsi controller.
+ * @master_ops: callbacks to mipi-dsi operations.
+ * @dsim_lcd_dev: pointer to activated ddi device.
+ * (it would be registered by mipi-dsi driver.)
+ * @dsim_lcd_drv: pointer to activated_ddi driver.
+ * (it would be registered by mipi-dsi driver.)
+ * @lcd_info: pointer to mipi_lcd_info structure.
+ * @state: specifies status of MIPI-DSI controller.
+ * the status could be RESET, INIT, STOP, HSCLKEN and ULPS.
+ * @data_lane: specifiec enabled data lane number.
+ * this variable would be set by driver according to e_no_data_lane
+ * automatically.
+ * @e_clk_src: select byte clock source.
+ * @pd: pointer to MIPI-DSI driver platform data.
+ * @phy: pointer to the MIPI-DSI PHY
+ */
+struct mipi_dsim_device {
+ struct device *dev;
+ int id;
+ struct clk *clock;
+ unsigned int irq;
+ void __iomem *reg_base;
+ struct mutex lock;
+
+ struct mipi_dsim_config *dsim_config;
+ struct mipi_dsim_master_ops *master_ops;
+ struct mipi_dsim_lcd_device *dsim_lcd_dev;
+ struct mipi_dsim_lcd_driver *dsim_lcd_drv;
+
+ unsigned int state;
+ unsigned int data_lane;
+ unsigned int e_clk_src;
+ bool suspended;
+
+ struct mipi_dsim_platform_data *pd;
+ struct phy *phy;
+};
+
+/*
+ * struct mipi_dsim_platform_data - interface to platform data
+ * for mipi-dsi driver.
+ *
+ * @lcd_panel_name: specifies lcd panel name registered to mipi-dsi driver.
+ * lcd panel driver searched would be actived.
+ * @dsim_config: pointer of structure for configuring mipi-dsi controller.
+ * @enabled: indicate whether mipi controller got enabled or not.
+ * @lcd_panel_info: pointer for lcd panel specific structure.
+ * this structure specifies width, height, timing and polarity and so on.
+ */
+struct mipi_dsim_platform_data {
+ char lcd_panel_name[PANEL_NAME_SIZE];
+
+ struct mipi_dsim_config *dsim_config;
+ unsigned int enabled;
+ void *lcd_panel_info;
+};
+
+/*
+ * struct mipi_dsim_master_ops - callbacks to mipi-dsi operations.
+ *
+ * @cmd_write: transfer command to lcd panel at LP mode.
+ * @cmd_read: read command from rx register.
+ * @get_dsim_frame_done: get the status that all screen data have been
+ * transferred to mipi-dsi.
+ * @clear_dsim_frame_done: clear frame done status.
+ * @get_fb_frame_done: get frame done status of display controller.
+ * @trigger: trigger display controller.
+ * - this one would be used only in case of CPU mode.
+ * @set_early_blank_mode: set framebuffer blank mode.
+ * - this callback should be called prior to fb_blank() by a client driver
+ * only if needing.
+ * @set_blank_mode: set framebuffer blank mode.
+ * - this callback should be called after fb_blank() by a client driver
+ * only if needing.
+ */
+
+struct mipi_dsim_master_ops {
+ int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id,
+ const unsigned char *data0, unsigned int data1);
+ int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id,
+ unsigned int data0, unsigned int req_size, u8 *rx_buf);
+ int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim);
+ int (*clear_dsim_frame_done)(struct mipi_dsim_device *dsim);
+
+ int (*get_fb_frame_done)(struct fb_info *info);
+ void (*trigger)(struct fb_info *info);
+ int (*set_early_blank_mode)(struct mipi_dsim_device *dsim, int power);
+ int (*set_blank_mode)(struct mipi_dsim_device *dsim, int power);
+};
+
+/*
+ * device structure for mipi-dsi based lcd panel.
+ *
+ * @name: name of the device to use with this device, or an
+ * alias for that name.
+ * @dev: driver model representation of the device.
+ * @id: id of device to be registered.
+ * @bus_id: bus id for identifing connected bus
+ * and this bus id should be same as id of mipi_dsim_device.
+ * @irq: irq number for signaling when framebuffer transfer of
+ * lcd panel module is completed.
+ * this irq would be used only for MIPI-DSI based CPU mode lcd panel.
+ * @master: pointer to mipi-dsi master device object.
+ * @platform_data: lcd panel specific platform data.
+ */
+struct mipi_dsim_lcd_device {
+ char *name;
+ struct device dev;
+ int id;
+ int bus_id;
+ int irq;
+ int panel_reverse;
+
+ struct mipi_dsim_device *master;
+ void *platform_data;
+};
+
+/*
+ * driver structure for mipi-dsi based lcd panel.
+ *
+ * this structure should be registered by lcd panel driver.
+ * mipi-dsi driver seeks lcd panel registered through name field
+ * and calls these callback functions in appropriate time.
+ *
+ * @name: name of the driver to use with this device, or an
+ * alias for that name.
+ * @id: id of driver to be registered.
+ * this id would be used for finding device object registered.
+ */
+struct mipi_dsim_lcd_driver {
+ char *name;
+ int id;
+
+ void (*power_on)(struct mipi_dsim_lcd_device *dsim_dev, int enable);
+ void (*set_sequence)(struct mipi_dsim_lcd_device *dsim_dev);
+ int (*probe)(struct mipi_dsim_lcd_device *dsim_dev);
+ int (*remove)(struct mipi_dsim_lcd_device *dsim_dev);
+ void (*shutdown)(struct mipi_dsim_lcd_device *dsim_dev);
+ int (*suspend)(struct mipi_dsim_lcd_device *dsim_dev);
+ int (*resume)(struct mipi_dsim_lcd_device *dsim_dev);
+};
+
+/*
+ * register mipi_dsim_lcd_device to mipi-dsi master.
+ */
+int exynos_mipi_dsi_register_lcd_device(struct mipi_dsim_lcd_device
+ *lcd_dev);
+/**
+ * register mipi_dsim_lcd_driver object defined by lcd panel driver
+ * to mipi-dsi driver.
+ */
+int exynos_mipi_dsi_register_lcd_driver(struct mipi_dsim_lcd_driver
+ *lcd_drv);
+#endif /* _EXYNOS_MIPI_DSIM_H */