diff options
Diffstat (limited to 'kernel/include/uapi/linux/nl80211.h')
| -rw-r--r-- | kernel/include/uapi/linux/nl80211.h | 85 |
1 files changed, 72 insertions, 13 deletions
diff --git a/kernel/include/uapi/linux/nl80211.h b/kernel/include/uapi/linux/nl80211.h index 241220c43..1f0b4cf5d 100644 --- a/kernel/include/uapi/linux/nl80211.h +++ b/kernel/include/uapi/linux/nl80211.h @@ -10,6 +10,7 @@ * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com> * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> * Copyright 2008 Colin McCabe <colin@cozybit.com> + * Copyright 2015 Intel Deutschland GmbH * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -328,7 +329,15 @@ * partial scan results may be available * * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain - * intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL. + * intervals and certain number of cycles, as specified by + * %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is + * not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified, + * scheduled scan will run in an infinite loop with the specified interval. + * These attributes are mutually exculsive, + * i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if + * NL80211_ATTR_SCHED_SCAN_PLANS is defined. + * If for some reason scheduled scan is aborted by the driver, all scan + * plans are canceled (including scan plans that did not start yet). * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) * are passed, they are used in the probe requests. For * broadcast, a broadcast SSID must be passed (ie. an empty @@ -1761,6 +1770,19 @@ enum nl80211_commands { * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device * is operating in an indoor environment. * + * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for + * scheduled scan supported by the device (u32), a wiphy attribute. + * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for + * a scan plan (u32), a wiphy attribute. + * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in + * a scan plan (u32), a wiphy attribute. + * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan. + * Each scan plan defines the number of scan iterations and the interval + * between scans. The last scan plan will always run infinitely, + * thus it must not specify the number of iterations, only the interval + * between scans. The scan plans are executed sequentially. + * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -2130,6 +2152,11 @@ enum nl80211_attrs { NL80211_ATTR_REG_INDOOR, + NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS, + NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL, + NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS, + NL80211_ATTR_SCHED_SCAN_PLANS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2620,16 +2647,17 @@ enum nl80211_band_attr { * an indoor surroundings, i.e., it is connected to AC power (and not * through portable DC inverters) or is under the control of a master * that is acting as an AP and is connected to AC power. - * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this + * @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this * channel if it's connected concurrently to a BSS on the same channel on * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz - * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a - * channel that has the GO_CONCURRENT attribute set can be done when there - * is a clear assessment that the device is operating under the guidance of - * an authorized master, i.e., setting up a GO while the device is also - * connected to an AP with DFS and radar detection on the UNII band (it is - * up to user-space, i.e., wpa_supplicant to perform the required - * verifications) + * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS + * off-channel on a channel that has the IR_CONCURRENT attribute set can be + * done when there is a clear assessment that the device is operating under + * the guidance of an authorized master, i.e., setting up a GO or TDLS + * off-channel while the device is also connected to an AP with DFS and + * radar detection on the UNII band (it is up to user-space, i.e., + * wpa_supplicant to perform the required verifications). Using this + * attribute for IR is disallowed for master interfaces (IBSS, AP). * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed @@ -2641,7 +2669,7 @@ enum nl80211_band_attr { * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122 * for more information on the FCC description of the relaxations allowed * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and - * NL80211_FREQUENCY_ATTR_GO_CONCURRENT. + * NL80211_FREQUENCY_ATTR_IR_CONCURRENT. */ enum nl80211_frequency_attr { __NL80211_FREQUENCY_ATTR_INVALID, @@ -2659,7 +2687,7 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_160MHZ, NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, NL80211_FREQUENCY_ATTR_INDOOR_ONLY, - NL80211_FREQUENCY_ATTR_GO_CONCURRENT, + NL80211_FREQUENCY_ATTR_IR_CONCURRENT, NL80211_FREQUENCY_ATTR_NO_20MHZ, NL80211_FREQUENCY_ATTR_NO_10MHZ, @@ -2672,6 +2700,8 @@ enum nl80211_frequency_attr { #define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN NL80211_FREQUENCY_ATTR_NO_IR #define NL80211_FREQUENCY_ATTR_NO_IBSS NL80211_FREQUENCY_ATTR_NO_IR #define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR +#define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \ + NL80211_FREQUENCY_ATTR_IR_CONCURRENT /** * enum nl80211_bitrate_attr - bitrate attributes @@ -2830,7 +2860,7 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated * base on contiguous rules and wider channels will be allowed to cross * multiple contiguous/overlapping frequency ranges. - * @NL80211_RRF_GO_CONCURRENT: See &NL80211_FREQUENCY_ATTR_GO_CONCURRENT + * @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed @@ -2847,7 +2877,7 @@ enum nl80211_reg_rule_flags { NL80211_RRF_NO_IR = 1<<7, __NL80211_RRF_NO_IBSS = 1<<8, NL80211_RRF_AUTO_BW = 1<<11, - NL80211_RRF_GO_CONCURRENT = 1<<12, + NL80211_RRF_IR_CONCURRENT = 1<<12, NL80211_RRF_NO_HT40MINUS = 1<<13, NL80211_RRF_NO_HT40PLUS = 1<<14, NL80211_RRF_NO_80MHZ = 1<<15, @@ -2859,6 +2889,7 @@ enum nl80211_reg_rule_flags { #define NL80211_RRF_NO_IR NL80211_RRF_NO_IR #define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\ NL80211_RRF_NO_HT40PLUS) +#define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT /* For backport compatibility with older userspace */ #define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS) @@ -3360,6 +3391,9 @@ enum nl80211_bss_scan_width { * (not present if no beacon frame has been received yet) * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and * @NL80211_BSS_TSF is known to be from a probe response (flag attribute) + * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry + * was last updated by a received frame. The value is expected to be + * accurate to about 10ms. (u64, nanoseconds) * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -3379,6 +3413,7 @@ enum nl80211_bss { NL80211_BSS_CHAN_WIDTH, NL80211_BSS_BEACON_TSF, NL80211_BSS_PRESP_DATA, + NL80211_BSS_LAST_SEEN_BOOTTIME, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -4585,4 +4620,28 @@ enum nl80211_tdls_peer_capability { NL80211_TDLS_PEER_WMM = 1<<2, }; +/** + * enum nl80211_sched_scan_plan - scanning plan for scheduled scan + * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved + * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In + * seconds (u32). + * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this + * scan plan (u32). The last scan plan must not specify this attribute + * because it will run infinitely. A value of zero is invalid as it will + * make the scan plan meaningless. + * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number + * currently defined + * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use + */ +enum nl80211_sched_scan_plan { + __NL80211_SCHED_SCAN_PLAN_INVALID, + NL80211_SCHED_SCAN_PLAN_INTERVAL, + NL80211_SCHED_SCAN_PLAN_ITERATIONS, + + /* keep last */ + __NL80211_SCHED_SCAN_PLAN_AFTER_LAST, + NL80211_SCHED_SCAN_PLAN_MAX = + __NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1 +}; + #endif /* __LINUX_NL80211_H */ |