diff options
Diffstat (limited to 'kernel/include/net/cfg80211.h')
| -rw-r--r-- | kernel/include/net/cfg80211.h | 170 |
1 files changed, 144 insertions, 26 deletions
diff --git a/kernel/include/net/cfg80211.h b/kernel/include/net/cfg80211.h index f8d6813cd..2c7bdb81d 100644 --- a/kernel/include/net/cfg80211.h +++ b/kernel/include/net/cfg80211.h @@ -5,6 +5,7 @@ * * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> * Copyright 2013-2014 Intel Mobile Communications GmbH + * Copyright 2015 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -111,7 +112,7 @@ enum ieee80211_band { * This may be due to the driver or due to regulatory bandwidth * restrictions. * @IEEE80211_CHAN_INDOOR_ONLY: see %NL80211_FREQUENCY_ATTR_INDOOR_ONLY - * @IEEE80211_CHAN_GO_CONCURRENT: see %NL80211_FREQUENCY_ATTR_GO_CONCURRENT + * @IEEE80211_CHAN_IR_CONCURRENT: see %NL80211_FREQUENCY_ATTR_IR_CONCURRENT * @IEEE80211_CHAN_NO_20MHZ: 20 MHz bandwidth is not permitted * on this channel. * @IEEE80211_CHAN_NO_10MHZ: 10 MHz bandwidth is not permitted @@ -129,7 +130,7 @@ enum ieee80211_channel_flags { IEEE80211_CHAN_NO_80MHZ = 1<<7, IEEE80211_CHAN_NO_160MHZ = 1<<8, IEEE80211_CHAN_INDOOR_ONLY = 1<<9, - IEEE80211_CHAN_GO_CONCURRENT = 1<<10, + IEEE80211_CHAN_IR_CONCURRENT = 1<<10, IEEE80211_CHAN_NO_20MHZ = 1<<11, IEEE80211_CHAN_NO_10MHZ = 1<<12, }; @@ -858,6 +859,8 @@ struct station_del_parameters { /** * enum cfg80211_station_type - the type of station being modified * @CFG80211_STA_AP_CLIENT: client of an AP interface + * @CFG80211_STA_AP_CLIENT_UNASSOC: client of an AP interface that is still + * unassociated (update properties for this type of client is permitted) * @CFG80211_STA_AP_MLME_CLIENT: client of an AP interface that has * the AP MLME in the device * @CFG80211_STA_AP_STA: AP station on managed interface @@ -873,6 +876,7 @@ struct station_del_parameters { */ enum cfg80211_station_type { CFG80211_STA_AP_CLIENT, + CFG80211_STA_AP_CLIENT_UNASSOC, CFG80211_STA_AP_MLME_CLIENT, CFG80211_STA_AP_STA, CFG80211_STA_IBSS, @@ -1498,13 +1502,26 @@ struct cfg80211_match_set { }; /** + * struct cfg80211_sched_scan_plan - scan plan for scheduled scan + * + * @interval: interval between scheduled scan iterations. In seconds. + * @iterations: number of scan iterations in this scan plan. Zero means + * infinite loop. + * The last scan plan will always have this parameter set to zero, + * all other scan plans will have a finite number of iterations. + */ +struct cfg80211_sched_scan_plan { + u32 interval; + u32 iterations; +}; + +/** * struct cfg80211_sched_scan_request - scheduled scan request description * * @ssids: SSIDs to scan for (passed in the probe_reqs in active scans) * @n_ssids: number of SSIDs * @n_channels: total number of channels to scan * @scan_width: channel width for scanning - * @interval: interval between each scheduled scan cycle * @ie: optional information element(s) to add into Probe Request or %NULL * @ie_len: length of ie in octets * @flags: bit field of flags controlling operation @@ -1523,6 +1540,9 @@ struct cfg80211_match_set { * @mac_addr_mask: MAC address mask used with randomisation, bits that * are 0 in the mask should be randomised, bits that are 1 should * be taken from the @mac_addr + * @scan_plans: scan plans to be executed in this scheduled scan. Lowest + * index must be executed first. + * @n_scan_plans: number of scan plans, at least 1. * @rcu_head: RCU callback used to free the struct * @owner_nlportid: netlink portid of owner (if this should is a request * owned by a particular socket) @@ -1536,7 +1556,6 @@ struct cfg80211_sched_scan_request { int n_ssids; u32 n_channels; enum nl80211_bss_scan_width scan_width; - u32 interval; const u8 *ie; size_t ie_len; u32 flags; @@ -1544,6 +1563,8 @@ struct cfg80211_sched_scan_request { int n_match_sets; s32 min_rssi_thold; u32 delay; + struct cfg80211_sched_scan_plan *scan_plans; + int n_scan_plans; u8 mac_addr[ETH_ALEN] __aligned(2); u8 mac_addr_mask[ETH_ALEN] __aligned(2); @@ -1573,6 +1594,26 @@ enum cfg80211_signal_type { }; /** + * struct cfg80211_inform_bss - BSS inform data + * @chan: channel the frame was received on + * @scan_width: scan width that was used + * @signal: signal strength value, according to the wiphy's + * signal type + * @boottime_ns: timestamp (CLOCK_BOOTTIME) when the information was + * received; should match the time when the frame was actually + * received by the device (not just by the host, in case it was + * buffered on the device) and be accurate to about 10ms. + * If the frame isn't buffered, just passing the return value of + * ktime_get_boot_ns() is likely appropriate. + */ +struct cfg80211_inform_bss { + struct ieee80211_channel *chan; + enum nl80211_bss_scan_width scan_width; + s32 signal; + u64 boottime_ns; +}; + +/** * struct cfg80211_bss_ie_data - BSS entry IE data * @tsf: TSF contained in the frame that carried these IEs * @rcu_head: internal use, for freeing @@ -2358,6 +2399,10 @@ struct cfg80211_qos_map { * @set_power_mgmt: Configure WLAN power management. A timeout value of -1 * allows the driver to adjust the dynamic ps timeout value. * @set_cqm_rssi_config: Configure connection quality monitor RSSI threshold. + * After configuration, the driver should (soon) send an event indicating + * the current level is above/below the configured threshold; this may + * need some care when the configuration is changed (without first being + * disabled.) * @set_cqm_txe_config: Configure connection quality monitor TX error * thresholds. * @sched_scan_start: Tell the driver to start a scheduled scan. @@ -2369,8 +2414,7 @@ struct cfg80211_qos_map { * method returns 0.) * * @mgmt_frame_register: Notify driver that a management frame type was - * registered. Note that this callback may not sleep, and cannot run - * concurrently with itself. + * registered. The callback is allowed to sleep. * * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device. * Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may @@ -2972,12 +3016,21 @@ enum wiphy_vendor_command_flags { * @doit: callback for the operation, note that wdev is %NULL if the * flags didn't ask for a wdev and non-%NULL otherwise; the data * pointer may be %NULL if userspace provided no data at all + * @dumpit: dump callback, for transferring bigger/multiple items. The + * @storage points to cb->args[5], ie. is preserved over the multiple + * dumpit calls. + * It's recommended to not have the same sub command with both @doit and + * @dumpit, so that userspace can assume certain ones are get and others + * are used with dump requests. */ struct wiphy_vendor_command { struct nl80211_vendor_cmd_info info; u32 flags; int (*doit)(struct wiphy *wiphy, struct wireless_dev *wdev, const void *data, int data_len); + int (*dumpit)(struct wiphy *wiphy, struct wireless_dev *wdev, + struct sk_buff *skb, const void *data, int data_len, + unsigned long *storage); }; /** @@ -3045,6 +3098,12 @@ struct wiphy_vendor_command { * include fixed IEs like supported rates * @max_sched_scan_ie_len: same as max_scan_ie_len, but for scheduled * scans + * @max_sched_scan_plans: maximum number of scan plans (scan interval and number + * of iterations) for scheduled scan supported by the device. + * @max_sched_scan_plan_interval: maximum interval (in seconds) for a + * single scan plan supported by the device. + * @max_sched_scan_plan_iterations: maximum number of iterations for a single + * scan plan supported by the device. * @coverage_class: current coverage class * @fw_version: firmware version for ethtool reporting * @hw_version: hardware version for ethtool reporting @@ -3152,6 +3211,9 @@ struct wiphy { u8 max_match_sets; u16 max_scan_ie_len; u16 max_sched_scan_ie_len; + u32 max_sched_scan_plans; + u32 max_sched_scan_plan_interval; + u32 max_sched_scan_plan_iterations; int n_cipher_suites; const u32 *cipher_suites; @@ -3947,14 +4009,11 @@ void cfg80211_sched_scan_stopped(struct wiphy *wiphy); void cfg80211_sched_scan_stopped_rtnl(struct wiphy *wiphy); /** - * cfg80211_inform_bss_width_frame - inform cfg80211 of a received BSS frame - * + * cfg80211_inform_bss_frame_data - inform cfg80211 of a received BSS frame * @wiphy: the wiphy reporting the BSS - * @rx_channel: The channel the frame was received on - * @scan_width: width of the control channel + * @data: the BSS metadata * @mgmt: the management frame (probe response or beacon) * @len: length of the management frame - * @signal: the signal strength, type depends on the wiphy's signal_type * @gfp: context flags * * This informs cfg80211 that BSS information was found and @@ -3964,11 +4023,26 @@ void cfg80211_sched_scan_stopped_rtnl(struct wiphy *wiphy); * Or %NULL on error. */ struct cfg80211_bss * __must_check +cfg80211_inform_bss_frame_data(struct wiphy *wiphy, + struct cfg80211_inform_bss *data, + struct ieee80211_mgmt *mgmt, size_t len, + gfp_t gfp); + +static inline struct cfg80211_bss * __must_check cfg80211_inform_bss_width_frame(struct wiphy *wiphy, struct ieee80211_channel *rx_channel, enum nl80211_bss_scan_width scan_width, struct ieee80211_mgmt *mgmt, size_t len, - s32 signal, gfp_t gfp); + s32 signal, gfp_t gfp) +{ + struct cfg80211_inform_bss data = { + .chan = rx_channel, + .scan_width = scan_width, + .signal = signal, + }; + + return cfg80211_inform_bss_frame_data(wiphy, &data, mgmt, len, gfp); +} static inline struct cfg80211_bss * __must_check cfg80211_inform_bss_frame(struct wiphy *wiphy, @@ -3976,9 +4050,13 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy, struct ieee80211_mgmt *mgmt, size_t len, s32 signal, gfp_t gfp) { - return cfg80211_inform_bss_width_frame(wiphy, rx_channel, - NL80211_BSS_CHAN_WIDTH_20, - mgmt, len, signal, gfp); + struct cfg80211_inform_bss data = { + .chan = rx_channel, + .scan_width = NL80211_BSS_CHAN_WIDTH_20, + .signal = signal, + }; + + return cfg80211_inform_bss_frame_data(wiphy, &data, mgmt, len, gfp); } /** @@ -3995,11 +4073,10 @@ enum cfg80211_bss_frame_type { }; /** - * cfg80211_inform_bss_width - inform cfg80211 of a new BSS + * cfg80211_inform_bss_data - inform cfg80211 of a new BSS * * @wiphy: the wiphy reporting the BSS - * @rx_channel: The channel the frame was received on - * @scan_width: width of the control channel + * @data: the BSS metadata * @ftype: frame type (if known) * @bssid: the BSSID of the BSS * @tsf: the TSF sent by the peer in the beacon/probe response (or 0) @@ -4007,7 +4084,6 @@ enum cfg80211_bss_frame_type { * @beacon_interval: the beacon interval announced by the peer * @ie: additional IEs sent by the peer * @ielen: length of the additional IEs - * @signal: the signal strength, type depends on the wiphy's signal_type * @gfp: context flags * * This informs cfg80211 that BSS information was found and @@ -4017,13 +4093,32 @@ enum cfg80211_bss_frame_type { * Or %NULL on error. */ struct cfg80211_bss * __must_check +cfg80211_inform_bss_data(struct wiphy *wiphy, + struct cfg80211_inform_bss *data, + enum cfg80211_bss_frame_type ftype, + const u8 *bssid, u64 tsf, u16 capability, + u16 beacon_interval, const u8 *ie, size_t ielen, + gfp_t gfp); + +static inline struct cfg80211_bss * __must_check cfg80211_inform_bss_width(struct wiphy *wiphy, struct ieee80211_channel *rx_channel, enum nl80211_bss_scan_width scan_width, enum cfg80211_bss_frame_type ftype, const u8 *bssid, u64 tsf, u16 capability, u16 beacon_interval, const u8 *ie, size_t ielen, - s32 signal, gfp_t gfp); + s32 signal, gfp_t gfp) +{ + struct cfg80211_inform_bss data = { + .chan = rx_channel, + .scan_width = scan_width, + .signal = signal, + }; + + return cfg80211_inform_bss_data(wiphy, &data, ftype, bssid, tsf, + capability, beacon_interval, ie, ielen, + gfp); +} static inline struct cfg80211_bss * __must_check cfg80211_inform_bss(struct wiphy *wiphy, @@ -4033,11 +4128,15 @@ cfg80211_inform_bss(struct wiphy *wiphy, u16 beacon_interval, const u8 *ie, size_t ielen, s32 signal, gfp_t gfp) { - return cfg80211_inform_bss_width(wiphy, rx_channel, - NL80211_BSS_CHAN_WIDTH_20, ftype, - bssid, tsf, capability, - beacon_interval, ie, ielen, signal, - gfp); + struct cfg80211_inform_bss data = { + .chan = rx_channel, + .scan_width = NL80211_BSS_CHAN_WIDTH_20, + .signal = signal, + }; + + return cfg80211_inform_bss_data(wiphy, &data, ftype, bssid, tsf, + capability, beacon_interval, ie, ielen, + gfp); } struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, @@ -4575,13 +4674,15 @@ void cfg80211_roamed_bss(struct net_device *dev, struct cfg80211_bss *bss, * @ie: information elements of the deauth/disassoc frame (may be %NULL) * @ie_len: length of IEs * @reason: reason code for the disconnection, set it to 0 if unknown + * @locally_generated: disconnection was requested locally * @gfp: allocation flags * * After it calls this function, the driver should enter an idle state * and not try to connect to any AP any more. */ void cfg80211_disconnected(struct net_device *dev, u16 reason, - const u8 *ie, size_t ie_len, gfp_t gfp); + const u8 *ie, size_t ie_len, + bool locally_generated, gfp_t gfp); /** * cfg80211_ready_on_channel - notification of remain_on_channel start @@ -4866,6 +4967,23 @@ bool cfg80211_reg_can_beacon(struct wiphy *wiphy, struct cfg80211_chan_def *chandef, enum nl80211_iftype iftype); +/** + * cfg80211_reg_can_beacon_relax - check if beaconing is allowed with relaxation + * @wiphy: the wiphy + * @chandef: the channel definition + * @iftype: interface type + * + * Return: %true if there is no secondary channel or the secondary channel(s) + * can be used for beaconing (i.e. is not a radar channel etc.). This version + * also checks if IR-relaxation conditions apply, to allow beaconing under + * more permissive conditions. + * + * Requires the RTNL to be held. + */ +bool cfg80211_reg_can_beacon_relax(struct wiphy *wiphy, + struct cfg80211_chan_def *chandef, + enum nl80211_iftype iftype); + /* * cfg80211_ch_switch_notify - update wdev channel and notify userspace * @dev: the device which switched channels |