summaryrefslogtreecommitdiffstats
path: root/kernel/include/linux/usb
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/include/linux/usb')
-rw-r--r--kernel/include/linux/usb/association.h150
-rw-r--r--kernel/include/linux/usb/atmel_usba_udc.h23
-rw-r--r--kernel/include/linux/usb/audio-v2.h461
-rw-r--r--kernel/include/linux/usb/audio.h44
-rw-r--r--kernel/include/linux/usb/c67x00.h48
-rw-r--r--kernel/include/linux/usb/cdc-wdm.h21
-rw-r--r--kernel/include/linux/usb/cdc_ncm.h145
-rw-r--r--kernel/include/linux/usb/ch9.h55
-rw-r--r--kernel/include/linux/usb/chipidea.h50
-rw-r--r--kernel/include/linux/usb/composite.h627
-rw-r--r--kernel/include/linux/usb/ehci-dbgp.h83
-rw-r--r--kernel/include/linux/usb/ehci_def.h195
-rw-r--r--kernel/include/linux/usb/ehci_pdriver.h63
-rw-r--r--kernel/include/linux/usb/ezusb.h8
-rw-r--r--kernel/include/linux/usb/functionfs.h6
-rw-r--r--kernel/include/linux/usb/g_hid.h32
-rw-r--r--kernel/include/linux/usb/gadget.h1054
-rw-r--r--kernel/include/linux/usb/gadget_configfs.h110
-rw-r--r--kernel/include/linux/usb/gpio_vbus.h32
-rw-r--r--kernel/include/linux/usb/hcd.h709
-rw-r--r--kernel/include/linux/usb/input.h25
-rw-r--r--kernel/include/linux/usb/iowarrior.h42
-rw-r--r--kernel/include/linux/usb/irda.h151
-rw-r--r--kernel/include/linux/usb/isp116x.h33
-rw-r--r--kernel/include/linux/usb/isp1301.h80
-rw-r--r--kernel/include/linux/usb/isp1362.h46
-rw-r--r--kernel/include/linux/usb/isp1760.h18
-rw-r--r--kernel/include/linux/usb/m66592.h46
-rw-r--r--kernel/include/linux/usb/msm_hsusb.h171
-rw-r--r--kernel/include/linux/usb/msm_hsusb_hw.h67
-rw-r--r--kernel/include/linux/usb/musb-omap.h30
-rw-r--r--kernel/include/linux/usb/musb-ux500.h31
-rw-r--r--kernel/include/linux/usb/musb.h155
-rw-r--r--kernel/include/linux/usb/net2280.h443
-rw-r--r--kernel/include/linux/usb/of.h45
-rw-r--r--kernel/include/linux/usb/ohci_pdriver.h48
-rw-r--r--kernel/include/linux/usb/otg-fsm.h246
-rw-r--r--kernel/include/linux/usb/otg.h107
-rw-r--r--kernel/include/linux/usb/phy.h329
-rw-r--r--kernel/include/linux/usb/phy_companion.h34
-rw-r--r--kernel/include/linux/usb/quirks.h50
-rw-r--r--kernel/include/linux/usb/r8a66597.h481
-rw-r--r--kernel/include/linux/usb/renesas_usbhs.h216
-rw-r--r--kernel/include/linux/usb/rndis_host.h210
-rw-r--r--kernel/include/linux/usb/samsung_usb_phy.h16
-rw-r--r--kernel/include/linux/usb/serial.h414
-rw-r--r--kernel/include/linux/usb/sl811.h29
-rw-r--r--kernel/include/linux/usb/storage.h86
-rw-r--r--kernel/include/linux/usb/tegra_usb_phy.h89
-rw-r--r--kernel/include/linux/usb/tilegx.h34
-rw-r--r--kernel/include/linux/usb/uas.h109
-rw-r--r--kernel/include/linux/usb/ulpi.h200
-rw-r--r--kernel/include/linux/usb/usb338x.h199
-rw-r--r--kernel/include/linux/usb/usb_phy_generic.h33
-rw-r--r--kernel/include/linux/usb/usbnet.h282
-rw-r--r--kernel/include/linux/usb/wusb-wa.h303
-rw-r--r--kernel/include/linux/usb/wusb.h377
-rw-r--r--kernel/include/linux/usb/xhci_pdriver.h27
58 files changed, 9218 insertions, 0 deletions
diff --git a/kernel/include/linux/usb/association.h b/kernel/include/linux/usb/association.h
new file mode 100644
index 000000000..0a4a18b3c
--- /dev/null
+++ b/kernel/include/linux/usb/association.h
@@ -0,0 +1,150 @@
+/*
+ * Wireless USB - Cable Based Association
+ *
+ * Copyright (C) 2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ */
+#ifndef __LINUX_USB_ASSOCIATION_H
+#define __LINUX_USB_ASSOCIATION_H
+
+
+/*
+ * Association attributes
+ *
+ * Association Models Supplement to WUSB 1.0 T[3-1]
+ *
+ * Each field in the structures has it's ID, it's length and then the
+ * value. This is the actual definition of the field's ID and its
+ * length.
+ */
+struct wusb_am_attr {
+ __u8 id;
+ __u8 len;
+};
+
+/* Different fields defined by the spec */
+#define WUSB_AR_AssociationTypeId { .id = cpu_to_le16(0x0000), .len = cpu_to_le16(2) }
+#define WUSB_AR_AssociationSubTypeId { .id = cpu_to_le16(0x0001), .len = cpu_to_le16(2) }
+#define WUSB_AR_Length { .id = cpu_to_le16(0x0002), .len = cpu_to_le16(4) }
+#define WUSB_AR_AssociationStatus { .id = cpu_to_le16(0x0004), .len = cpu_to_le16(4) }
+#define WUSB_AR_LangID { .id = cpu_to_le16(0x0008), .len = cpu_to_le16(2) }
+#define WUSB_AR_DeviceFriendlyName { .id = cpu_to_le16(0x000b), .len = cpu_to_le16(64) } /* max */
+#define WUSB_AR_HostFriendlyName { .id = cpu_to_le16(0x000c), .len = cpu_to_le16(64) } /* max */
+#define WUSB_AR_CHID { .id = cpu_to_le16(0x1000), .len = cpu_to_le16(16) }
+#define WUSB_AR_CDID { .id = cpu_to_le16(0x1001), .len = cpu_to_le16(16) }
+#define WUSB_AR_ConnectionContext { .id = cpu_to_le16(0x1002), .len = cpu_to_le16(48) }
+#define WUSB_AR_BandGroups { .id = cpu_to_le16(0x1004), .len = cpu_to_le16(2) }
+
+/* CBAF Control Requests (AMS1.0[T4-1] */
+enum {
+ CBAF_REQ_GET_ASSOCIATION_INFORMATION = 0x01,
+ CBAF_REQ_GET_ASSOCIATION_REQUEST,
+ CBAF_REQ_SET_ASSOCIATION_RESPONSE
+};
+
+/*
+ * CBAF USB-interface defitions
+ *
+ * No altsettings, one optional interrupt endpoint.
+ */
+enum {
+ CBAF_IFACECLASS = 0xef,
+ CBAF_IFACESUBCLASS = 0x03,
+ CBAF_IFACEPROTOCOL = 0x01,
+};
+
+/* Association Information (AMS1.0[T4-3]) */
+struct wusb_cbaf_assoc_info {
+ __le16 Length;
+ __u8 NumAssociationRequests;
+ __le16 Flags;
+ __u8 AssociationRequestsArray[];
+} __attribute__((packed));
+
+/* Association Request (AMS1.0[T4-4]) */
+struct wusb_cbaf_assoc_request {
+ __u8 AssociationDataIndex;
+ __u8 Reserved;
+ __le16 AssociationTypeId;
+ __le16 AssociationSubTypeId;
+ __le32 AssociationTypeInfoSize;
+} __attribute__((packed));
+
+enum {
+ AR_TYPE_WUSB = 0x0001,
+ AR_TYPE_WUSB_RETRIEVE_HOST_INFO = 0x0000,
+ AR_TYPE_WUSB_ASSOCIATE = 0x0001,
+};
+
+/* Association Attribute header (AMS1.0[3.8]) */
+struct wusb_cbaf_attr_hdr {
+ __le16 id;
+ __le16 len;
+} __attribute__((packed));
+
+/* Host Info (AMS1.0[T4-7]) (yeah, more headers and fields...) */
+struct wusb_cbaf_host_info {
+ struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
+ __le16 AssociationTypeId;
+ struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
+ __le16 AssociationSubTypeId;
+ struct wusb_cbaf_attr_hdr CHID_hdr;
+ struct wusb_ckhdid CHID;
+ struct wusb_cbaf_attr_hdr LangID_hdr;
+ __le16 LangID;
+ struct wusb_cbaf_attr_hdr HostFriendlyName_hdr;
+ __u8 HostFriendlyName[];
+} __attribute__((packed));
+
+/* Device Info (AMS1.0[T4-8])
+ *
+ * I still don't get this tag'n'header stuff for each goddamn
+ * field...
+ */
+struct wusb_cbaf_device_info {
+ struct wusb_cbaf_attr_hdr Length_hdr;
+ __le32 Length;
+ struct wusb_cbaf_attr_hdr CDID_hdr;
+ struct wusb_ckhdid CDID;
+ struct wusb_cbaf_attr_hdr BandGroups_hdr;
+ __le16 BandGroups;
+ struct wusb_cbaf_attr_hdr LangID_hdr;
+ __le16 LangID;
+ struct wusb_cbaf_attr_hdr DeviceFriendlyName_hdr;
+ __u8 DeviceFriendlyName[];
+} __attribute__((packed));
+
+/* Connection Context; CC_DATA - Success case (AMS1.0[T4-9]) */
+struct wusb_cbaf_cc_data {
+ struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
+ __le16 AssociationTypeId;
+ struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
+ __le16 AssociationSubTypeId;
+ struct wusb_cbaf_attr_hdr Length_hdr;
+ __le32 Length;
+ struct wusb_cbaf_attr_hdr ConnectionContext_hdr;
+ struct wusb_ckhdid CHID;
+ struct wusb_ckhdid CDID;
+ struct wusb_ckhdid CK;
+ struct wusb_cbaf_attr_hdr BandGroups_hdr;
+ __le16 BandGroups;
+} __attribute__((packed));
+
+/* CC_DATA - Failure case (AMS1.0[T4-10]) */
+struct wusb_cbaf_cc_data_fail {
+ struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
+ __le16 AssociationTypeId;
+ struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
+ __le16 AssociationSubTypeId;
+ struct wusb_cbaf_attr_hdr Length_hdr;
+ __le16 Length;
+ struct wusb_cbaf_attr_hdr AssociationStatus_hdr;
+ __u32 AssociationStatus;
+} __attribute__((packed));
+
+#endif /* __LINUX_USB_ASSOCIATION_H */
diff --git a/kernel/include/linux/usb/atmel_usba_udc.h b/kernel/include/linux/usb/atmel_usba_udc.h
new file mode 100644
index 000000000..ba99af275
--- /dev/null
+++ b/kernel/include/linux/usb/atmel_usba_udc.h
@@ -0,0 +1,23 @@
+/*
+ * Platform data definitions for Atmel USBA gadget driver.
+ */
+#ifndef __LINUX_USB_USBA_H
+#define __LINUX_USB_USBA_H
+
+struct usba_ep_data {
+ char *name;
+ int index;
+ int fifo_size;
+ int nr_banks;
+ int can_dma;
+ int can_isoc;
+};
+
+struct usba_platform_data {
+ int vbus_pin;
+ int vbus_pin_inverted;
+ int num_ep;
+ struct usba_ep_data ep[0];
+};
+
+#endif /* __LINUX_USB_USBA_H */
diff --git a/kernel/include/linux/usb/audio-v2.h b/kernel/include/linux/usb/audio-v2.h
new file mode 100644
index 000000000..c5f2158ab
--- /dev/null
+++ b/kernel/include/linux/usb/audio-v2.h
@@ -0,0 +1,461 @@
+/*
+ * Copyright (c) 2010 Daniel Mack <daniel@caiaq.de>
+ *
+ * This software is distributed under the terms of the GNU General Public
+ * License ("GPL") version 2, as published by the Free Software Foundation.
+ *
+ * This file holds USB constants and structures defined
+ * by the USB Device Class Definition for Audio Devices in version 2.0.
+ * Comments below reference relevant sections of the documents contained
+ * in http://www.usb.org/developers/devclass_docs/Audio2.0_final.zip
+ */
+
+#ifndef __LINUX_USB_AUDIO_V2_H
+#define __LINUX_USB_AUDIO_V2_H
+
+#include <linux/types.h>
+
+/* v1.0 and v2.0 of this standard have many things in common. For the rest
+ * of the definitions, please refer to audio.h */
+
+/*
+ * bmControl field decoders
+ *
+ * From the USB Audio spec v2.0:
+ *
+ * bmaControls() is a (ch+1)-element array of 4-byte bitmaps,
+ * each containing a set of bit pairs. If a Control is present,
+ * it must be Host readable. If a certain Control is not
+ * present then the bit pair must be set to 0b00.
+ * If a Control is present but read-only, the bit pair must be
+ * set to 0b01. If a Control is also Host programmable, the bit
+ * pair must be set to 0b11. The value 0b10 is not allowed.
+ *
+ */
+
+static inline bool uac2_control_is_readable(u32 bmControls, u8 control)
+{
+ return (bmControls >> (control * 2)) & 0x1;
+}
+
+static inline bool uac2_control_is_writeable(u32 bmControls, u8 control)
+{
+ return (bmControls >> (control * 2)) & 0x2;
+}
+
+/* 4.7.2 Class-Specific AC Interface Descriptor */
+struct uac2_ac_header_descriptor {
+ __u8 bLength; /* 9 */
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* UAC_MS_HEADER */
+ __le16 bcdADC; /* 0x0200 */
+ __u8 bCategory;
+ __le16 wTotalLength; /* includes Unit and Terminal desc. */
+ __u8 bmControls;
+} __packed;
+
+/* 2.3.1.6 Type I Format Type Descriptor (Frmts20 final.pdf)*/
+struct uac2_format_type_i_descriptor {
+ __u8 bLength; /* in bytes: 6 */
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* FORMAT_TYPE */
+ __u8 bFormatType; /* FORMAT_TYPE_1 */
+ __u8 bSubslotSize; /* {1,2,3,4} */
+ __u8 bBitResolution;
+} __packed;
+
+/* 4.7.2.1 Clock Source Descriptor */
+
+struct uac_clock_source_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bClockID;
+ __u8 bmAttributes;
+ __u8 bmControls;
+ __u8 bAssocTerminal;
+ __u8 iClockSource;
+} __attribute__((packed));
+
+/* bmAttribute fields */
+#define UAC_CLOCK_SOURCE_TYPE_EXT 0x0
+#define UAC_CLOCK_SOURCE_TYPE_INT_FIXED 0x1
+#define UAC_CLOCK_SOURCE_TYPE_INT_VAR 0x2
+#define UAC_CLOCK_SOURCE_TYPE_INT_PROG 0x3
+#define UAC_CLOCK_SOURCE_SYNCED_TO_SOF (1 << 2)
+
+/* 4.7.2.2 Clock Source Descriptor */
+
+struct uac_clock_selector_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bClockID;
+ __u8 bNrInPins;
+ __u8 baCSourceID[];
+ /* bmControls, bAssocTerminal and iClockSource omitted */
+} __attribute__((packed));
+
+/* 4.7.2.3 Clock Multiplier Descriptor */
+
+struct uac_clock_multiplier_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bClockID;
+ __u8 bCSourceID;
+ __u8 bmControls;
+ __u8 iClockMultiplier;
+} __attribute__((packed));
+
+/* 4.7.2.4 Input terminal descriptor */
+
+struct uac2_input_terminal_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bTerminalID;
+ __u16 wTerminalType;
+ __u8 bAssocTerminal;
+ __u8 bCSourceID;
+ __u8 bNrChannels;
+ __u32 bmChannelConfig;
+ __u8 iChannelNames;
+ __u16 bmControls;
+ __u8 iTerminal;
+} __attribute__((packed));
+
+/* 4.7.2.5 Output terminal descriptor */
+
+struct uac2_output_terminal_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bTerminalID;
+ __u16 wTerminalType;
+ __u8 bAssocTerminal;
+ __u8 bSourceID;
+ __u8 bCSourceID;
+ __u16 bmControls;
+ __u8 iTerminal;
+} __attribute__((packed));
+
+
+
+/* 4.7.2.8 Feature Unit Descriptor */
+
+struct uac2_feature_unit_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bUnitID;
+ __u8 bSourceID;
+ /* bmaControls is actually u32,
+ * but u8 is needed for the hybrid parser */
+ __u8 bmaControls[0]; /* variable length */
+} __attribute__((packed));
+
+/* 4.9.2 Class-Specific AS Interface Descriptor */
+
+struct uac2_as_header_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u8 bTerminalLink;
+ __u8 bmControls;
+ __u8 bFormatType;
+ __u32 bmFormats;
+ __u8 bNrChannels;
+ __u32 bmChannelConfig;
+ __u8 iChannelNames;
+} __attribute__((packed));
+
+#define UAC2_FORMAT_TYPE_I_RAW_DATA (1 << 31)
+
+/* 4.10.1.2 Class-Specific AS Isochronous Audio Data Endpoint Descriptor */
+
+struct uac2_iso_endpoint_descriptor {
+ __u8 bLength; /* in bytes: 8 */
+ __u8 bDescriptorType; /* USB_DT_CS_ENDPOINT */
+ __u8 bDescriptorSubtype; /* EP_GENERAL */
+ __u8 bmAttributes;
+ __u8 bmControls;
+ __u8 bLockDelayUnits;
+ __le16 wLockDelay;
+} __attribute__((packed));
+
+#define UAC2_CONTROL_PITCH (3 << 0)
+#define UAC2_CONTROL_DATA_OVERRUN (3 << 2)
+#define UAC2_CONTROL_DATA_UNDERRUN (3 << 4)
+
+/* 6.1 Interrupt Data Message */
+
+#define UAC2_INTERRUPT_DATA_MSG_VENDOR (1 << 0)
+#define UAC2_INTERRUPT_DATA_MSG_EP (1 << 1)
+
+struct uac2_interrupt_data_msg {
+ __u8 bInfo;
+ __u8 bAttribute;
+ __le16 wValue;
+ __le16 wIndex;
+} __attribute__((packed));
+
+/* A.7 Audio Function Category Codes */
+#define UAC2_FUNCTION_SUBCLASS_UNDEFINED 0x00
+#define UAC2_FUNCTION_DESKTOP_SPEAKER 0x01
+#define UAC2_FUNCTION_HOME_THEATER 0x02
+#define UAC2_FUNCTION_MICROPHONE 0x03
+#define UAC2_FUNCTION_HEADSET 0x04
+#define UAC2_FUNCTION_TELEPHONE 0x05
+#define UAC2_FUNCTION_CONVERTER 0x06
+#define UAC2_FUNCTION_SOUND_RECORDER 0x07
+#define UAC2_FUNCTION_IO_BOX 0x08
+#define UAC2_FUNCTION_MUSICAL_INSTRUMENT 0x09
+#define UAC2_FUNCTION_PRO_AUDIO 0x0a
+#define UAC2_FUNCTION_AUDIO_VIDEO 0x0b
+#define UAC2_FUNCTION_CONTROL_PANEL 0x0c
+#define UAC2_FUNCTION_OTHER 0xff
+
+/* A.9 Audio Class-Specific AC Interface Descriptor Subtypes */
+/* see audio.h for the rest, which is identical to v1 */
+#define UAC2_EFFECT_UNIT 0x07
+#define UAC2_PROCESSING_UNIT_V2 0x08
+#define UAC2_EXTENSION_UNIT_V2 0x09
+#define UAC2_CLOCK_SOURCE 0x0a
+#define UAC2_CLOCK_SELECTOR 0x0b
+#define UAC2_CLOCK_MULTIPLIER 0x0c
+#define UAC2_SAMPLE_RATE_CONVERTER 0x0d
+
+/* A.10 Audio Class-Specific AS Interface Descriptor Subtypes */
+/* see audio.h for the rest, which is identical to v1 */
+#define UAC2_ENCODER 0x03
+#define UAC2_DECODER 0x04
+
+/* A.11 Effect Unit Effect Types */
+#define UAC2_EFFECT_UNDEFINED 0x00
+#define UAC2_EFFECT_PARAM_EQ 0x01
+#define UAC2_EFFECT_REVERB 0x02
+#define UAC2_EFFECT_MOD_DELAY 0x03
+#define UAC2_EFFECT_DYN_RANGE_COMP 0x04
+
+/* A.12 Processing Unit Process Types */
+#define UAC2_PROCESS_UNDEFINED 0x00
+#define UAC2_PROCESS_UP_DOWNMIX 0x01
+#define UAC2_PROCESS_DOLBY_PROLOCIC 0x02
+#define UAC2_PROCESS_STEREO_EXTENDER 0x03
+
+/* A.14 Audio Class-Specific Request Codes */
+#define UAC2_CS_CUR 0x01
+#define UAC2_CS_RANGE 0x02
+#define UAC2_CS_MEM 0x03
+
+/* A.15 Encoder Type Codes */
+#define UAC2_ENCODER_UNDEFINED 0x00
+#define UAC2_ENCODER_OTHER 0x01
+#define UAC2_ENCODER_MPEG 0x02
+#define UAC2_ENCODER_AC3 0x03
+#define UAC2_ENCODER_WMA 0x04
+#define UAC2_ENCODER_DTS 0x05
+
+/* A.16 Decoder Type Codes */
+#define UAC2_DECODER_UNDEFINED 0x00
+#define UAC2_DECODER_OTHER 0x01
+#define UAC2_DECODER_MPEG 0x02
+#define UAC2_DECODER_AC3 0x03
+#define UAC2_DECODER_WMA 0x04
+#define UAC2_DECODER_DTS 0x05
+
+/* A.17.1 Clock Source Control Selectors */
+#define UAC2_CS_UNDEFINED 0x00
+#define UAC2_CS_CONTROL_SAM_FREQ 0x01
+#define UAC2_CS_CONTROL_CLOCK_VALID 0x02
+
+/* A.17.2 Clock Selector Control Selectors */
+#define UAC2_CX_UNDEFINED 0x00
+#define UAC2_CX_CLOCK_SELECTOR 0x01
+
+/* A.17.3 Clock Multiplier Control Selectors */
+#define UAC2_CM_UNDEFINED 0x00
+#define UAC2_CM_NUMERATOR 0x01
+#define UAC2_CM_DENOMINTATOR 0x02
+
+/* A.17.4 Terminal Control Selectors */
+#define UAC2_TE_UNDEFINED 0x00
+#define UAC2_TE_COPY_PROTECT 0x01
+#define UAC2_TE_CONNECTOR 0x02
+#define UAC2_TE_OVERLOAD 0x03
+#define UAC2_TE_CLUSTER 0x04
+#define UAC2_TE_UNDERFLOW 0x05
+#define UAC2_TE_OVERFLOW 0x06
+#define UAC2_TE_LATENCY 0x07
+
+/* A.17.5 Mixer Control Selectors */
+#define UAC2_MU_UNDEFINED 0x00
+#define UAC2_MU_MIXER 0x01
+#define UAC2_MU_CLUSTER 0x02
+#define UAC2_MU_UNDERFLOW 0x03
+#define UAC2_MU_OVERFLOW 0x04
+#define UAC2_MU_LATENCY 0x05
+
+/* A.17.6 Selector Control Selectors */
+#define UAC2_SU_UNDEFINED 0x00
+#define UAC2_SU_SELECTOR 0x01
+#define UAC2_SU_LATENCY 0x02
+
+/* A.17.7 Feature Unit Control Selectors */
+/* see audio.h for the rest, which is identical to v1 */
+#define UAC2_FU_INPUT_GAIN 0x0b
+#define UAC2_FU_INPUT_GAIN_PAD 0x0c
+#define UAC2_FU_PHASE_INVERTER 0x0d
+#define UAC2_FU_UNDERFLOW 0x0e
+#define UAC2_FU_OVERFLOW 0x0f
+#define UAC2_FU_LATENCY 0x10
+
+/* A.17.8.1 Parametric Equalizer Section Effect Unit Control Selectors */
+#define UAC2_PE_UNDEFINED 0x00
+#define UAC2_PE_ENABLE 0x01
+#define UAC2_PE_CENTERFREQ 0x02
+#define UAC2_PE_QFACTOR 0x03
+#define UAC2_PE_GAIN 0x04
+#define UAC2_PE_UNDERFLOW 0x05
+#define UAC2_PE_OVERFLOW 0x06
+#define UAC2_PE_LATENCY 0x07
+
+/* A.17.8.2 Reverberation Effect Unit Control Selectors */
+#define UAC2_RV_UNDEFINED 0x00
+#define UAC2_RV_ENABLE 0x01
+#define UAC2_RV_TYPE 0x02
+#define UAC2_RV_LEVEL 0x03
+#define UAC2_RV_TIME 0x04
+#define UAC2_RV_FEEDBACK 0x05
+#define UAC2_RV_PREDELAY 0x06
+#define UAC2_RV_DENSITY 0x07
+#define UAC2_RV_HIFREQ_ROLLOFF 0x08
+#define UAC2_RV_UNDERFLOW 0x09
+#define UAC2_RV_OVERFLOW 0x0a
+#define UAC2_RV_LATENCY 0x0b
+
+/* A.17.8.3 Modulation Delay Effect Control Selectors */
+#define UAC2_MD_UNDEFINED 0x00
+#define UAC2_MD_ENABLE 0x01
+#define UAC2_MD_BALANCE 0x02
+#define UAC2_MD_RATE 0x03
+#define UAC2_MD_DEPTH 0x04
+#define UAC2_MD_TIME 0x05
+#define UAC2_MD_FEEDBACK 0x06
+#define UAC2_MD_UNDERFLOW 0x07
+#define UAC2_MD_OVERFLOW 0x08
+#define UAC2_MD_LATENCY 0x09
+
+/* A.17.8.4 Dynamic Range Compressor Effect Unit Control Selectors */
+#define UAC2_DR_UNDEFINED 0x00
+#define UAC2_DR_ENABLE 0x01
+#define UAC2_DR_COMPRESSION_RATE 0x02
+#define UAC2_DR_MAXAMPL 0x03
+#define UAC2_DR_THRESHOLD 0x04
+#define UAC2_DR_ATTACK_TIME 0x05
+#define UAC2_DR_RELEASE_TIME 0x06
+#define UAC2_DR_UNDEFLOW 0x07
+#define UAC2_DR_OVERFLOW 0x08
+#define UAC2_DR_LATENCY 0x09
+
+/* A.17.9.1 Up/Down-mix Processing Unit Control Selectors */
+#define UAC2_UD_UNDEFINED 0x00
+#define UAC2_UD_ENABLE 0x01
+#define UAC2_UD_MODE_SELECT 0x02
+#define UAC2_UD_CLUSTER 0x03
+#define UAC2_UD_UNDERFLOW 0x04
+#define UAC2_UD_OVERFLOW 0x05
+#define UAC2_UD_LATENCY 0x06
+
+/* A.17.9.2 Dolby Prologic[tm] Processing Unit Control Selectors */
+#define UAC2_DP_UNDEFINED 0x00
+#define UAC2_DP_ENABLE 0x01
+#define UAC2_DP_MODE_SELECT 0x02
+#define UAC2_DP_CLUSTER 0x03
+#define UAC2_DP_UNDERFFLOW 0x04
+#define UAC2_DP_OVERFLOW 0x05
+#define UAC2_DP_LATENCY 0x06
+
+/* A.17.9.3 Stereo Expander Processing Unit Control Selectors */
+#define UAC2_ST_EXT_UNDEFINED 0x00
+#define UAC2_ST_EXT_ENABLE 0x01
+#define UAC2_ST_EXT_WIDTH 0x02
+#define UAC2_ST_EXT_UNDEFLOW 0x03
+#define UAC2_ST_EXT_OVERFLOW 0x04
+#define UAC2_ST_EXT_LATENCY 0x05
+
+/* A.17.10 Extension Unit Control Selectors */
+#define UAC2_XU_UNDEFINED 0x00
+#define UAC2_XU_ENABLE 0x01
+#define UAC2_XU_CLUSTER 0x02
+#define UAC2_XU_UNDERFLOW 0x03
+#define UAC2_XU_OVERFLOW 0x04
+#define UAC2_XU_LATENCY 0x05
+
+/* A.17.11 AudioStreaming Interface Control Selectors */
+#define UAC2_AS_UNDEFINED 0x00
+#define UAC2_AS_ACT_ALT_SETTING 0x01
+#define UAC2_AS_VAL_ALT_SETTINGS 0x02
+#define UAC2_AS_AUDIO_DATA_FORMAT 0x03
+
+/* A.17.12 Encoder Control Selectors */
+#define UAC2_EN_UNDEFINED 0x00
+#define UAC2_EN_BIT_RATE 0x01
+#define UAC2_EN_QUALITY 0x02
+#define UAC2_EN_VBR 0x03
+#define UAC2_EN_TYPE 0x04
+#define UAC2_EN_UNDERFLOW 0x05
+#define UAC2_EN_OVERFLOW 0x06
+#define UAC2_EN_ENCODER_ERROR 0x07
+#define UAC2_EN_PARAM1 0x08
+#define UAC2_EN_PARAM2 0x09
+#define UAC2_EN_PARAM3 0x0a
+#define UAC2_EN_PARAM4 0x0b
+#define UAC2_EN_PARAM5 0x0c
+#define UAC2_EN_PARAM6 0x0d
+#define UAC2_EN_PARAM7 0x0e
+#define UAC2_EN_PARAM8 0x0f
+
+/* A.17.13.1 MPEG Decoder Control Selectors */
+#define UAC2_MPEG_UNDEFINED 0x00
+#define UAC2_MPEG_DUAL_CHANNEL 0x01
+#define UAC2_MPEG_SECOND_STEREO 0x02
+#define UAC2_MPEG_MULTILINGUAL 0x03
+#define UAC2_MPEG_DYN_RANGE 0x04
+#define UAC2_MPEG_SCALING 0x05
+#define UAC2_MPEG_HILO_SCALING 0x06
+#define UAC2_MPEG_UNDERFLOW 0x07
+#define UAC2_MPEG_OVERFLOW 0x08
+#define UAC2_MPEG_DECODER_ERROR 0x09
+
+/* A17.13.2 AC3 Decoder Control Selectors */
+#define UAC2_AC3_UNDEFINED 0x00
+#define UAC2_AC3_MODE 0x01
+#define UAC2_AC3_DYN_RANGE 0x02
+#define UAC2_AC3_SCALING 0x03
+#define UAC2_AC3_HILO_SCALING 0x04
+#define UAC2_AC3_UNDERFLOW 0x05
+#define UAC2_AC3_OVERFLOW 0x06
+#define UAC2_AC3_DECODER_ERROR 0x07
+
+/* A17.13.3 WMA Decoder Control Selectors */
+#define UAC2_WMA_UNDEFINED 0x00
+#define UAC2_WMA_UNDERFLOW 0x01
+#define UAC2_WMA_OVERFLOW 0x02
+#define UAC2_WMA_DECODER_ERROR 0x03
+
+/* A17.13.4 DTS Decoder Control Selectors */
+#define UAC2_DTS_UNDEFINED 0x00
+#define UAC2_DTS_UNDERFLOW 0x01
+#define UAC2_DTS_OVERFLOW 0x02
+#define UAC2_DTS_DECODER_ERROR 0x03
+
+/* A17.14 Endpoint Control Selectors */
+#define UAC2_EP_CS_UNDEFINED 0x00
+#define UAC2_EP_CS_PITCH 0x01
+#define UAC2_EP_CS_DATA_OVERRUN 0x02
+#define UAC2_EP_CS_DATA_UNDERRUN 0x03
+
+#endif /* __LINUX_USB_AUDIO_V2_H */
+
diff --git a/kernel/include/linux/usb/audio.h b/kernel/include/linux/usb/audio.h
new file mode 100644
index 000000000..3d8461911
--- /dev/null
+++ b/kernel/include/linux/usb/audio.h
@@ -0,0 +1,44 @@
+/*
+ * <linux/usb/audio.h> -- USB Audio definitions.
+ *
+ * Copyright (C) 2006 Thumtronics Pty Ltd.
+ * Developed for Thumtronics by Grey Innovation
+ * Ben Williamson <ben.williamson@greyinnovation.com>
+ *
+ * This software is distributed under the terms of the GNU General Public
+ * License ("GPL") version 2, as published by the Free Software Foundation.
+ *
+ * This file holds USB constants and structures defined
+ * by the USB Device Class Definition for Audio Devices.
+ * Comments below reference relevant sections of that document:
+ *
+ * http://www.usb.org/developers/devclass_docs/audio10.pdf
+ *
+ * Types and defines in this file are either specific to version 1.0 of
+ * this standard or common for newer versions.
+ */
+#ifndef __LINUX_USB_AUDIO_H
+#define __LINUX_USB_AUDIO_H
+
+#include <uapi/linux/usb/audio.h>
+
+
+struct usb_audio_control {
+ struct list_head list;
+ const char *name;
+ u8 type;
+ int data[5];
+ int (*set)(struct usb_audio_control *con, u8 cmd, int value);
+ int (*get)(struct usb_audio_control *con, u8 cmd);
+};
+
+struct usb_audio_control_selector {
+ struct list_head list;
+ struct list_head control;
+ u8 id;
+ const char *name;
+ u8 type;
+ struct usb_descriptor_header *desc;
+};
+
+#endif /* __LINUX_USB_AUDIO_H */
diff --git a/kernel/include/linux/usb/c67x00.h b/kernel/include/linux/usb/c67x00.h
new file mode 100644
index 000000000..83c6b4547
--- /dev/null
+++ b/kernel/include/linux/usb/c67x00.h
@@ -0,0 +1,48 @@
+/*
+ * usb_c67x00.h: platform definitions for the Cypress C67X00 USB chip
+ *
+ * Copyright (C) 2006-2008 Barco N.V.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA.
+ */
+
+#ifndef _LINUX_USB_C67X00_H
+#define _LINUX_USB_C67X00_H
+
+/* SIE configuration */
+#define C67X00_SIE_UNUSED 0
+#define C67X00_SIE_HOST 1
+#define C67X00_SIE_PERIPHERAL_A 2 /* peripheral on A port */
+#define C67X00_SIE_PERIPHERAL_B 3 /* peripheral on B port */
+
+#define c67x00_sie_config(config, n) (((config)>>(4*(n)))&0x3)
+
+#define C67X00_SIE1_UNUSED (C67X00_SIE_UNUSED << 0)
+#define C67X00_SIE1_HOST (C67X00_SIE_HOST << 0)
+#define C67X00_SIE1_PERIPHERAL_A (C67X00_SIE_PERIPHERAL_A << 0)
+#define C67X00_SIE1_PERIPHERAL_B (C67X00_SIE_PERIPHERAL_B << 0)
+
+#define C67X00_SIE2_UNUSED (C67X00_SIE_UNUSED << 4)
+#define C67X00_SIE2_HOST (C67X00_SIE_HOST << 4)
+#define C67X00_SIE2_PERIPHERAL_A (C67X00_SIE_PERIPHERAL_A << 4)
+#define C67X00_SIE2_PERIPHERAL_B (C67X00_SIE_PERIPHERAL_B << 4)
+
+struct c67x00_platform_data {
+ int sie_config; /* SIEs config (C67X00_SIEx_*) */
+ unsigned long hpi_regstep; /* Step between HPI registers */
+};
+
+#endif /* _LINUX_USB_C67X00_H */
diff --git a/kernel/include/linux/usb/cdc-wdm.h b/kernel/include/linux/usb/cdc-wdm.h
new file mode 100644
index 000000000..0b3f4295c
--- /dev/null
+++ b/kernel/include/linux/usb/cdc-wdm.h
@@ -0,0 +1,21 @@
+/*
+ * USB CDC Device Management subdriver
+ *
+ * Copyright (c) 2012 Bjørn Mork <bjorn@mork.no>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_USB_CDC_WDM_H
+#define __LINUX_USB_CDC_WDM_H
+
+#include <uapi/linux/usb/cdc-wdm.h>
+
+extern struct usb_driver *usb_cdc_wdm_register(struct usb_interface *intf,
+ struct usb_endpoint_descriptor *ep,
+ int bufsize,
+ int (*manage_power)(struct usb_interface *, int));
+
+#endif /* __LINUX_USB_CDC_WDM_H */
diff --git a/kernel/include/linux/usb/cdc_ncm.h b/kernel/include/linux/usb/cdc_ncm.h
new file mode 100644
index 000000000..7c9b48473
--- /dev/null
+++ b/kernel/include/linux/usb/cdc_ncm.h
@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) ST-Ericsson 2010-2012
+ * Contact: Alexey Orishko <alexey.orishko@stericsson.com>
+ * Original author: Hans Petter Selasky <hans.petter.selasky@stericsson.com>
+ *
+ * USB Host Driver for Network Control Model (NCM)
+ * http://www.usb.org/developers/devclass_docs/NCM10.zip
+ *
+ * The NCM encoding, decoding and initialization logic
+ * derives from FreeBSD 8.x. if_cdce.c and if_cdcereg.h
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose this file to be licensed under the terms
+ * of the GNU General Public License (GPL) Version 2 or the 2-clause
+ * BSD license listed below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef __LINUX_USB_CDC_NCM_H
+#define __LINUX_USB_CDC_NCM_H
+
+#define CDC_NCM_COMM_ALTSETTING_NCM 0
+#define CDC_NCM_COMM_ALTSETTING_MBIM 1
+
+#define CDC_NCM_DATA_ALTSETTING_NCM 1
+#define CDC_NCM_DATA_ALTSETTING_MBIM 2
+
+/* CDC NCM subclass 3.2.1 */
+#define USB_CDC_NCM_NDP16_LENGTH_MIN 0x10
+
+/* Maximum NTB length */
+#define CDC_NCM_NTB_MAX_SIZE_TX 32768 /* bytes */
+#define CDC_NCM_NTB_MAX_SIZE_RX 32768 /* bytes */
+
+/* Initial NTB length */
+#define CDC_NCM_NTB_DEF_SIZE_TX 16384 /* bytes */
+#define CDC_NCM_NTB_DEF_SIZE_RX 16384 /* bytes */
+
+/* Minimum value for MaxDatagramSize, ch. 6.2.9 */
+#define CDC_NCM_MIN_DATAGRAM_SIZE 1514 /* bytes */
+
+/* Minimum value for MaxDatagramSize, ch. 8.1.3 */
+#define CDC_MBIM_MIN_DATAGRAM_SIZE 2048 /* bytes */
+
+#define CDC_NCM_MIN_TX_PKT 512 /* bytes */
+
+/* Default value for MaxDatagramSize */
+#define CDC_NCM_MAX_DATAGRAM_SIZE 8192 /* bytes */
+
+/*
+ * Maximum amount of datagrams in NCM Datagram Pointer Table, not counting
+ * the last NULL entry.
+ */
+#define CDC_NCM_DPT_DATAGRAMS_MAX 40
+
+/* Restart the timer, if amount of datagrams is less than given value */
+#define CDC_NCM_RESTART_TIMER_DATAGRAM_CNT 3
+#define CDC_NCM_TIMER_PENDING_CNT 2
+#define CDC_NCM_TIMER_INTERVAL_USEC 400UL
+#define CDC_NCM_TIMER_INTERVAL_MIN 5UL
+#define CDC_NCM_TIMER_INTERVAL_MAX (U32_MAX / NSEC_PER_USEC)
+
+#define cdc_ncm_comm_intf_is_mbim(x) ((x)->desc.bInterfaceSubClass == USB_CDC_SUBCLASS_MBIM && \
+ (x)->desc.bInterfaceProtocol == USB_CDC_PROTO_NONE)
+#define cdc_ncm_data_intf_is_mbim(x) ((x)->desc.bInterfaceProtocol == USB_CDC_MBIM_PROTO_NTB)
+
+struct cdc_ncm_ctx {
+ struct usb_cdc_ncm_ntb_parameters ncm_parm;
+ struct hrtimer tx_timer;
+ struct tasklet_struct bh;
+
+ const struct usb_cdc_ncm_desc *func_desc;
+ const struct usb_cdc_mbim_desc *mbim_desc;
+ const struct usb_cdc_mbim_extended_desc *mbim_extended_desc;
+ const struct usb_cdc_ether_desc *ether_desc;
+
+ struct usb_interface *control;
+ struct usb_interface *data;
+
+ struct sk_buff *tx_curr_skb;
+ struct sk_buff *tx_rem_skb;
+ __le32 tx_rem_sign;
+
+ spinlock_t mtx;
+ atomic_t stop;
+
+ u32 timer_interval;
+ u32 max_ndp_size;
+
+ u32 tx_timer_pending;
+ u32 tx_curr_frame_num;
+ u32 rx_max;
+ u32 tx_max;
+ u32 max_datagram_size;
+ u16 tx_max_datagrams;
+ u16 tx_remainder;
+ u16 tx_modulus;
+ u16 tx_ndp_modulus;
+ u16 tx_seq;
+ u16 rx_seq;
+ u16 min_tx_pkt;
+
+ /* statistics */
+ u32 tx_curr_frame_payload;
+ u32 tx_reason_ntb_full;
+ u32 tx_reason_ndp_full;
+ u32 tx_reason_timeout;
+ u32 tx_reason_max_datagram;
+ u64 tx_overhead;
+ u64 tx_ntbs;
+ u64 rx_overhead;
+ u64 rx_ntbs;
+};
+
+u8 cdc_ncm_select_altsetting(struct usb_interface *intf);
+int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting);
+void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf);
+struct sk_buff *cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign);
+int cdc_ncm_rx_verify_nth16(struct cdc_ncm_ctx *ctx, struct sk_buff *skb_in);
+int cdc_ncm_rx_verify_ndp16(struct sk_buff *skb_in, int ndpoffset);
+struct sk_buff *
+cdc_ncm_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags);
+int cdc_ncm_rx_fixup(struct usbnet *dev, struct sk_buff *skb_in);
+
+#endif /* __LINUX_USB_CDC_NCM_H */
diff --git a/kernel/include/linux/usb/ch9.h b/kernel/include/linux/usb/ch9.h
new file mode 100644
index 000000000..27603bcbb
--- /dev/null
+++ b/kernel/include/linux/usb/ch9.h
@@ -0,0 +1,55 @@
+/*
+ * This file holds USB constants and structures that are needed for
+ * USB device APIs. These are used by the USB device model, which is
+ * defined in chapter 9 of the USB 2.0 specification and in the
+ * Wireless USB 1.0 (spread around). Linux has several APIs in C that
+ * need these:
+ *
+ * - the master/host side Linux-USB kernel driver API;
+ * - the "usbfs" user space API; and
+ * - the Linux "gadget" slave/device/peripheral side driver API.
+ *
+ * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems
+ * act either as a USB master/host or as a USB slave/device. That means
+ * the master and slave side APIs benefit from working well together.
+ *
+ * There's also "Wireless USB", using low power short range radios for
+ * peripheral interconnection but otherwise building on the USB framework.
+ *
+ * Note all descriptors are declared '__attribute__((packed))' so that:
+ *
+ * [a] they never get padded, either internally (USB spec writers
+ * probably handled that) or externally;
+ *
+ * [b] so that accessing bigger-than-a-bytes fields will never
+ * generate bus errors on any platform, even when the location of
+ * its descriptor inside a bundle isn't "naturally aligned", and
+ *
+ * [c] for consistency, removing all doubt even when it appears to
+ * someone that the two other points are non-issues for that
+ * particular descriptor type.
+ */
+#ifndef __LINUX_USB_CH9_H
+#define __LINUX_USB_CH9_H
+
+#include <uapi/linux/usb/ch9.h>
+
+
+/**
+ * usb_speed_string() - Returns human readable-name of the speed.
+ * @speed: The speed to return human-readable name for. If it's not
+ * any of the speeds defined in usb_device_speed enum, string for
+ * USB_SPEED_UNKNOWN will be returned.
+ */
+extern const char *usb_speed_string(enum usb_device_speed speed);
+
+
+/**
+ * usb_state_string - Returns human readable name for the state.
+ * @state: The state to return a human-readable name for. If it's not
+ * any of the states devices in usb_device_state_string enum,
+ * the string UNKNOWN will be returned.
+ */
+extern const char *usb_state_string(enum usb_device_state state);
+
+#endif /* __LINUX_USB_CH9_H */
diff --git a/kernel/include/linux/usb/chipidea.h b/kernel/include/linux/usb/chipidea.h
new file mode 100644
index 000000000..ab94f78c4
--- /dev/null
+++ b/kernel/include/linux/usb/chipidea.h
@@ -0,0 +1,50 @@
+/*
+ * Platform data for the chipidea USB dual role controller
+ */
+
+#ifndef __LINUX_USB_CHIPIDEA_H
+#define __LINUX_USB_CHIPIDEA_H
+
+#include <linux/usb/otg.h>
+
+struct ci_hdrc;
+struct ci_hdrc_platform_data {
+ const char *name;
+ /* offset of the capability registers */
+ uintptr_t capoffset;
+ unsigned power_budget;
+ struct phy *phy;
+ /* old usb_phy interface */
+ struct usb_phy *usb_phy;
+ enum usb_phy_interface phy_mode;
+ unsigned long flags;
+#define CI_HDRC_REGS_SHARED BIT(0)
+#define CI_HDRC_SUPPORTS_RUNTIME_PM BIT(2)
+#define CI_HDRC_DISABLE_STREAMING BIT(3)
+ /*
+ * Only set it when DCCPARAMS.DC==1 and DCCPARAMS.HC==1,
+ * but otg is not supported (no register otgsc).
+ */
+#define CI_HDRC_DUAL_ROLE_NOT_OTG BIT(4)
+#define CI_HDRC_IMX28_WRITE_FIX BIT(5)
+#define CI_HDRC_FORCE_FULLSPEED BIT(6)
+#define CI_HDRC_TURN_VBUS_EARLY_ON BIT(7)
+ enum usb_dr_mode dr_mode;
+#define CI_HDRC_CONTROLLER_RESET_EVENT 0
+#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
+ void (*notify_event) (struct ci_hdrc *ci, unsigned event);
+ struct regulator *reg_vbus;
+ bool tpl_support;
+};
+
+/* Default offset of capability registers */
+#define DEF_CAPOFFSET 0x100
+
+/* Add ci hdrc device */
+struct platform_device *ci_hdrc_add_device(struct device *dev,
+ struct resource *res, int nres,
+ struct ci_hdrc_platform_data *platdata);
+/* Remove ci hdrc device */
+void ci_hdrc_remove_device(struct platform_device *pdev);
+
+#endif
diff --git a/kernel/include/linux/usb/composite.h b/kernel/include/linux/usb/composite.h
new file mode 100644
index 000000000..2511469a9
--- /dev/null
+++ b/kernel/include/linux/usb/composite.h
@@ -0,0 +1,627 @@
+/*
+ * composite.h -- framework for usb gadgets which are composite devices
+ *
+ * Copyright (C) 2006-2008 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __LINUX_USB_COMPOSITE_H
+#define __LINUX_USB_COMPOSITE_H
+
+/*
+ * This framework is an optional layer on top of the USB Gadget interface,
+ * making it easier to build (a) Composite devices, supporting multiple
+ * functions within any single configuration, and (b) Multi-configuration
+ * devices, also supporting multiple functions but without necessarily
+ * having more than one function per configuration.
+ *
+ * Example: a device with a single configuration supporting both network
+ * link and mass storage functions is a composite device. Those functions
+ * might alternatively be packaged in individual configurations, but in
+ * the composite model the host can use both functions at the same time.
+ */
+
+#include <linux/bcd.h>
+#include <linux/version.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/log2.h>
+#include <linux/configfs.h>
+
+/*
+ * USB function drivers should return USB_GADGET_DELAYED_STATUS if they
+ * wish to delay the data/status stages of the control transfer till they
+ * are ready. The control transfer will then be kept from completing till
+ * all the function drivers that requested for USB_GADGET_DELAYED_STAUS
+ * invoke usb_composite_setup_continue().
+ */
+#define USB_GADGET_DELAYED_STATUS 0x7fff /* Impossibly large value */
+
+/* big enough to hold our biggest descriptor */
+#define USB_COMP_EP0_BUFSIZ 1024
+
+#define USB_MS_TO_HS_INTERVAL(x) (ilog2((x * 1000 / 125)) + 1)
+struct usb_configuration;
+
+/**
+ * struct usb_os_desc_ext_prop - describes one "Extended Property"
+ * @entry: used to keep a list of extended properties
+ * @type: Extended Property type
+ * @name_len: Extended Property unicode name length, including terminating '\0'
+ * @name: Extended Property name
+ * @data_len: Length of Extended Property blob (for unicode store double len)
+ * @data: Extended Property blob
+ * @item: Represents this Extended Property in configfs
+ */
+struct usb_os_desc_ext_prop {
+ struct list_head entry;
+ u8 type;
+ int name_len;
+ char *name;
+ int data_len;
+ char *data;
+ struct config_item item;
+};
+
+/**
+ * struct usb_os_desc - describes OS descriptors associated with one interface
+ * @ext_compat_id: 16 bytes of "Compatible ID" and "Subcompatible ID"
+ * @ext_prop: Extended Properties list
+ * @ext_prop_len: Total length of Extended Properties blobs
+ * @ext_prop_count: Number of Extended Properties
+ * @opts_mutex: Optional mutex protecting config data of a usb_function_instance
+ * @group: Represents OS descriptors associated with an interface in configfs
+ * @owner: Module associated with this OS descriptor
+ */
+struct usb_os_desc {
+ char *ext_compat_id;
+ struct list_head ext_prop;
+ int ext_prop_len;
+ int ext_prop_count;
+ struct mutex *opts_mutex;
+ struct config_group group;
+ struct module *owner;
+};
+
+/**
+ * struct usb_os_desc_table - describes OS descriptors associated with one
+ * interface of a usb_function
+ * @if_id: Interface id
+ * @os_desc: "Extended Compatibility ID" and "Extended Properties" of the
+ * interface
+ *
+ * Each interface can have at most one "Extended Compatibility ID" and a
+ * number of "Extended Properties".
+ */
+struct usb_os_desc_table {
+ int if_id;
+ struct usb_os_desc *os_desc;
+};
+
+/**
+ * struct usb_function - describes one function of a configuration
+ * @name: For diagnostics, identifies the function.
+ * @strings: tables of strings, keyed by identifiers assigned during bind()
+ * and by language IDs provided in control requests
+ * @fs_descriptors: Table of full (or low) speed descriptors, using interface and
+ * string identifiers assigned during @bind(). If this pointer is null,
+ * the function will not be available at full speed (or at low speed).
+ * @hs_descriptors: Table of high speed descriptors, using interface and
+ * string identifiers assigned during @bind(). If this pointer is null,
+ * the function will not be available at high speed.
+ * @ss_descriptors: Table of super speed descriptors, using interface and
+ * string identifiers assigned during @bind(). If this
+ * pointer is null after initiation, the function will not
+ * be available at super speed.
+ * @config: assigned when @usb_add_function() is called; this is the
+ * configuration with which this function is associated.
+ * @os_desc_table: Table of (interface id, os descriptors) pairs. The function
+ * can expose more than one interface. If an interface is a member of
+ * an IAD, only the first interface of IAD has its entry in the table.
+ * @os_desc_n: Number of entries in os_desc_table
+ * @bind: Before the gadget can register, all of its functions bind() to the
+ * available resources including string and interface identifiers used
+ * in interface or class descriptors; endpoints; I/O buffers; and so on.
+ * @unbind: Reverses @bind; called as a side effect of unregistering the
+ * driver which added this function.
+ * @free_func: free the struct usb_function.
+ * @mod: (internal) points to the module that created this structure.
+ * @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may
+ * initialize usb_ep.driver data at this time (when it is used).
+ * Note that setting an interface to its current altsetting resets
+ * interface state, and that all interfaces have a disabled state.
+ * @get_alt: Returns the active altsetting. If this is not provided,
+ * then only altsetting zero is supported.
+ * @disable: (REQUIRED) Indicates the function should be disabled. Reasons
+ * include host resetting or reconfiguring the gadget, and disconnection.
+ * @setup: Used for interface-specific control requests.
+ * @req_match: Tests if a given class request can be handled by this function.
+ * @suspend: Notifies functions when the host stops sending USB traffic.
+ * @resume: Notifies functions when the host restarts USB traffic.
+ * @get_status: Returns function status as a reply to
+ * GetStatus() request when the recipient is Interface.
+ * @func_suspend: callback to be called when
+ * SetFeature(FUNCTION_SUSPEND) is reseived
+ *
+ * A single USB function uses one or more interfaces, and should in most
+ * cases support operation at both full and high speeds. Each function is
+ * associated by @usb_add_function() with a one configuration; that function
+ * causes @bind() to be called so resources can be allocated as part of
+ * setting up a gadget driver. Those resources include endpoints, which
+ * should be allocated using @usb_ep_autoconfig().
+ *
+ * To support dual speed operation, a function driver provides descriptors
+ * for both high and full speed operation. Except in rare cases that don't
+ * involve bulk endpoints, each speed needs different endpoint descriptors.
+ *
+ * Function drivers choose their own strategies for managing instance data.
+ * The simplest strategy just declares it "static', which means the function
+ * can only be activated once. If the function needs to be exposed in more
+ * than one configuration at a given speed, it needs to support multiple
+ * usb_function structures (one for each configuration).
+ *
+ * A more complex strategy might encapsulate a @usb_function structure inside
+ * a driver-specific instance structure to allows multiple activations. An
+ * example of multiple activations might be a CDC ACM function that supports
+ * two or more distinct instances within the same configuration, providing
+ * several independent logical data links to a USB host.
+ */
+
+struct usb_function {
+ const char *name;
+ struct usb_gadget_strings **strings;
+ struct usb_descriptor_header **fs_descriptors;
+ struct usb_descriptor_header **hs_descriptors;
+ struct usb_descriptor_header **ss_descriptors;
+
+ struct usb_configuration *config;
+
+ struct usb_os_desc_table *os_desc_table;
+ unsigned os_desc_n;
+
+ /* REVISIT: bind() functions can be marked __init, which
+ * makes trouble for section mismatch analysis. See if
+ * we can't restructure things to avoid mismatching.
+ * Related: unbind() may kfree() but bind() won't...
+ */
+
+ /* configuration management: bind/unbind */
+ int (*bind)(struct usb_configuration *,
+ struct usb_function *);
+ void (*unbind)(struct usb_configuration *,
+ struct usb_function *);
+ void (*free_func)(struct usb_function *f);
+ struct module *mod;
+
+ /* runtime state management */
+ int (*set_alt)(struct usb_function *,
+ unsigned interface, unsigned alt);
+ int (*get_alt)(struct usb_function *,
+ unsigned interface);
+ void (*disable)(struct usb_function *);
+ int (*setup)(struct usb_function *,
+ const struct usb_ctrlrequest *);
+ bool (*req_match)(struct usb_function *,
+ const struct usb_ctrlrequest *);
+ void (*suspend)(struct usb_function *);
+ void (*resume)(struct usb_function *);
+
+ /* USB 3.0 additions */
+ int (*get_status)(struct usb_function *);
+ int (*func_suspend)(struct usb_function *,
+ u8 suspend_opt);
+ /* private: */
+ /* internals */
+ struct list_head list;
+ DECLARE_BITMAP(endpoints, 32);
+ const struct usb_function_instance *fi;
+};
+
+int usb_add_function(struct usb_configuration *, struct usb_function *);
+
+int usb_function_deactivate(struct usb_function *);
+int usb_function_activate(struct usb_function *);
+
+int usb_interface_id(struct usb_configuration *, struct usb_function *);
+
+int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f,
+ struct usb_ep *_ep);
+
+#define MAX_CONFIG_INTERFACES 16 /* arbitrary; max 255 */
+
+/**
+ * struct usb_configuration - represents one gadget configuration
+ * @label: For diagnostics, describes the configuration.
+ * @strings: Tables of strings, keyed by identifiers assigned during @bind()
+ * and by language IDs provided in control requests.
+ * @descriptors: Table of descriptors preceding all function descriptors.
+ * Examples include OTG and vendor-specific descriptors.
+ * @unbind: Reverses @bind; called as a side effect of unregistering the
+ * driver which added this configuration.
+ * @setup: Used to delegate control requests that aren't handled by standard
+ * device infrastructure or directed at a specific interface.
+ * @bConfigurationValue: Copied into configuration descriptor.
+ * @iConfiguration: Copied into configuration descriptor.
+ * @bmAttributes: Copied into configuration descriptor.
+ * @MaxPower: Power consumtion in mA. Used to compute bMaxPower in the
+ * configuration descriptor after considering the bus speed.
+ * @cdev: assigned by @usb_add_config() before calling @bind(); this is
+ * the device associated with this configuration.
+ *
+ * Configurations are building blocks for gadget drivers structured around
+ * function drivers. Simple USB gadgets require only one function and one
+ * configuration, and handle dual-speed hardware by always providing the same
+ * functionality. Slightly more complex gadgets may have more than one
+ * single-function configuration at a given speed; or have configurations
+ * that only work at one speed.
+ *
+ * Composite devices are, by definition, ones with configurations which
+ * include more than one function.
+ *
+ * The lifecycle of a usb_configuration includes allocation, initialization
+ * of the fields described above, and calling @usb_add_config() to set up
+ * internal data and bind it to a specific device. The configuration's
+ * @bind() method is then used to initialize all the functions and then
+ * call @usb_add_function() for them.
+ *
+ * Those functions would normally be independent of each other, but that's
+ * not mandatory. CDC WMC devices are an example where functions often
+ * depend on other functions, with some functions subsidiary to others.
+ * Such interdependency may be managed in any way, so long as all of the
+ * descriptors complete by the time the composite driver returns from
+ * its bind() routine.
+ */
+struct usb_configuration {
+ const char *label;
+ struct usb_gadget_strings **strings;
+ const struct usb_descriptor_header **descriptors;
+
+ /* REVISIT: bind() functions can be marked __init, which
+ * makes trouble for section mismatch analysis. See if
+ * we can't restructure things to avoid mismatching...
+ */
+
+ /* configuration management: unbind/setup */
+ void (*unbind)(struct usb_configuration *);
+ int (*setup)(struct usb_configuration *,
+ const struct usb_ctrlrequest *);
+
+ /* fields in the config descriptor */
+ u8 bConfigurationValue;
+ u8 iConfiguration;
+ u8 bmAttributes;
+ u16 MaxPower;
+
+ struct usb_composite_dev *cdev;
+
+ /* private: */
+ /* internals */
+ struct list_head list;
+ struct list_head functions;
+ u8 next_interface_id;
+ unsigned superspeed:1;
+ unsigned highspeed:1;
+ unsigned fullspeed:1;
+ struct usb_function *interface[MAX_CONFIG_INTERFACES];
+};
+
+int usb_add_config(struct usb_composite_dev *,
+ struct usb_configuration *,
+ int (*)(struct usb_configuration *));
+
+void usb_remove_config(struct usb_composite_dev *,
+ struct usb_configuration *);
+
+/* predefined index for usb_composite_driver */
+enum {
+ USB_GADGET_MANUFACTURER_IDX = 0,
+ USB_GADGET_PRODUCT_IDX,
+ USB_GADGET_SERIAL_IDX,
+ USB_GADGET_FIRST_AVAIL_IDX,
+};
+
+/**
+ * struct usb_composite_driver - groups configurations into a gadget
+ * @name: For diagnostics, identifies the driver.
+ * @dev: Template descriptor for the device, including default device
+ * identifiers.
+ * @strings: tables of strings, keyed by identifiers assigned during @bind
+ * and language IDs provided in control requests. Note: The first entries
+ * are predefined. The first entry that may be used is
+ * USB_GADGET_FIRST_AVAIL_IDX
+ * @max_speed: Highest speed the driver supports.
+ * @needs_serial: set to 1 if the gadget needs userspace to provide
+ * a serial number. If one is not provided, warning will be printed.
+ * @bind: (REQUIRED) Used to allocate resources that are shared across the
+ * whole device, such as string IDs, and add its configurations using
+ * @usb_add_config(). This may fail by returning a negative errno
+ * value; it should return zero on successful initialization.
+ * @unbind: Reverses @bind; called as a side effect of unregistering
+ * this driver.
+ * @disconnect: optional driver disconnect method
+ * @suspend: Notifies when the host stops sending USB traffic,
+ * after function notifications
+ * @resume: Notifies configuration when the host restarts USB traffic,
+ * before function notifications
+ * @gadget_driver: Gadget driver controlling this driver
+ *
+ * Devices default to reporting self powered operation. Devices which rely
+ * on bus powered operation should report this in their @bind method.
+ *
+ * Before returning from @bind, various fields in the template descriptor
+ * may be overridden. These include the idVendor/idProduct/bcdDevice values
+ * normally to bind the appropriate host side driver, and the three strings
+ * (iManufacturer, iProduct, iSerialNumber) normally used to provide user
+ * meaningful device identifiers. (The strings will not be defined unless
+ * they are defined in @dev and @strings.) The correct ep0 maxpacket size
+ * is also reported, as defined by the underlying controller driver.
+ */
+struct usb_composite_driver {
+ const char *name;
+ const struct usb_device_descriptor *dev;
+ struct usb_gadget_strings **strings;
+ enum usb_device_speed max_speed;
+ unsigned needs_serial:1;
+
+ int (*bind)(struct usb_composite_dev *cdev);
+ int (*unbind)(struct usb_composite_dev *);
+
+ void (*disconnect)(struct usb_composite_dev *);
+
+ /* global suspend hooks */
+ void (*suspend)(struct usb_composite_dev *);
+ void (*resume)(struct usb_composite_dev *);
+ struct usb_gadget_driver gadget_driver;
+};
+
+extern int usb_composite_probe(struct usb_composite_driver *driver);
+extern void usb_composite_unregister(struct usb_composite_driver *driver);
+
+/**
+ * module_usb_composite_driver() - Helper macro for registering a USB gadget
+ * composite driver
+ * @__usb_composite_driver: usb_composite_driver struct
+ *
+ * Helper macro for USB gadget composite drivers which do not do anything
+ * special in module init/exit. This eliminates a lot of boilerplate. Each
+ * module may only use this macro once, and calling it replaces module_init()
+ * and module_exit()
+ */
+#define module_usb_composite_driver(__usb_composite_driver) \
+ module_driver(__usb_composite_driver, usb_composite_probe, \
+ usb_composite_unregister)
+
+extern void usb_composite_setup_continue(struct usb_composite_dev *cdev);
+extern int composite_dev_prepare(struct usb_composite_driver *composite,
+ struct usb_composite_dev *cdev);
+extern int composite_os_desc_req_prepare(struct usb_composite_dev *cdev,
+ struct usb_ep *ep0);
+void composite_dev_cleanup(struct usb_composite_dev *cdev);
+
+static inline struct usb_composite_driver *to_cdriver(
+ struct usb_gadget_driver *gdrv)
+{
+ return container_of(gdrv, struct usb_composite_driver, gadget_driver);
+}
+
+#define OS_STRING_QW_SIGN_LEN 14
+#define OS_STRING_IDX 0xEE
+
+/**
+ * struct usb_composite_device - represents one composite usb gadget
+ * @gadget: read-only, abstracts the gadget's usb peripheral controller
+ * @req: used for control responses; buffer is pre-allocated
+ * @os_desc_req: used for OS descriptors responses; buffer is pre-allocated
+ * @config: the currently active configuration
+ * @qw_sign: qwSignature part of the OS string
+ * @b_vendor_code: bMS_VendorCode part of the OS string
+ * @use_os_string: false by default, interested gadgets set it
+ * @os_desc_config: the configuration to be used with OS descriptors
+ * @setup_pending: true when setup request is queued but not completed
+ * @os_desc_pending: true when os_desc request is queued but not completed
+ *
+ * One of these devices is allocated and initialized before the
+ * associated device driver's bind() is called.
+ *
+ * OPEN ISSUE: it appears that some WUSB devices will need to be
+ * built by combining a normal (wired) gadget with a wireless one.
+ * This revision of the gadget framework should probably try to make
+ * sure doing that won't hurt too much.
+ *
+ * One notion for how to handle Wireless USB devices involves:
+ * (a) a second gadget here, discovery mechanism TBD, but likely
+ * needing separate "register/unregister WUSB gadget" calls;
+ * (b) updates to usb_gadget to include flags "is it wireless",
+ * "is it wired", plus (presumably in a wrapper structure)
+ * bandgroup and PHY info;
+ * (c) presumably a wireless_ep wrapping a usb_ep, and reporting
+ * wireless-specific parameters like maxburst and maxsequence;
+ * (d) configurations that are specific to wireless links;
+ * (e) function drivers that understand wireless configs and will
+ * support wireless for (additional) function instances;
+ * (f) a function to support association setup (like CBAF), not
+ * necessarily requiring a wireless adapter;
+ * (g) composite device setup that can create one or more wireless
+ * configs, including appropriate association setup support;
+ * (h) more, TBD.
+ */
+struct usb_composite_dev {
+ struct usb_gadget *gadget;
+ struct usb_request *req;
+ struct usb_request *os_desc_req;
+
+ struct usb_configuration *config;
+
+ /* OS String is a custom (yet popular) extension to the USB standard. */
+ u8 qw_sign[OS_STRING_QW_SIGN_LEN];
+ u8 b_vendor_code;
+ struct usb_configuration *os_desc_config;
+ unsigned int use_os_string:1;
+
+ /* private: */
+ /* internals */
+ unsigned int suspended:1;
+ struct usb_device_descriptor desc;
+ struct list_head configs;
+ struct list_head gstrings;
+ struct usb_composite_driver *driver;
+ u8 next_string_id;
+ char *def_manufacturer;
+
+ /* the gadget driver won't enable the data pullup
+ * while the deactivation count is nonzero.
+ */
+ unsigned deactivations;
+
+ /* the composite driver won't complete the control transfer's
+ * data/status stages till delayed_status is zero.
+ */
+ int delayed_status;
+
+ /* protects deactivations and delayed_status counts*/
+ spinlock_t lock;
+
+ unsigned setup_pending:1;
+ unsigned os_desc_pending:1;
+};
+
+extern int usb_string_id(struct usb_composite_dev *c);
+extern int usb_string_ids_tab(struct usb_composite_dev *c,
+ struct usb_string *str);
+extern struct usb_string *usb_gstrings_attach(struct usb_composite_dev *cdev,
+ struct usb_gadget_strings **sp, unsigned n_strings);
+
+extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n);
+
+extern void composite_disconnect(struct usb_gadget *gadget);
+extern int composite_setup(struct usb_gadget *gadget,
+ const struct usb_ctrlrequest *ctrl);
+extern void composite_suspend(struct usb_gadget *gadget);
+extern void composite_resume(struct usb_gadget *gadget);
+
+/*
+ * Some systems will need runtime overrides for the product identifiers
+ * published in the device descriptor, either numbers or strings or both.
+ * String parameters are in UTF-8 (superset of ASCII's 7 bit characters).
+ */
+struct usb_composite_overwrite {
+ u16 idVendor;
+ u16 idProduct;
+ u16 bcdDevice;
+ char *serial_number;
+ char *manufacturer;
+ char *product;
+};
+#define USB_GADGET_COMPOSITE_OPTIONS() \
+ static struct usb_composite_overwrite coverwrite; \
+ \
+ module_param_named(idVendor, coverwrite.idVendor, ushort, S_IRUGO); \
+ MODULE_PARM_DESC(idVendor, "USB Vendor ID"); \
+ \
+ module_param_named(idProduct, coverwrite.idProduct, ushort, S_IRUGO); \
+ MODULE_PARM_DESC(idProduct, "USB Product ID"); \
+ \
+ module_param_named(bcdDevice, coverwrite.bcdDevice, ushort, S_IRUGO); \
+ MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); \
+ \
+ module_param_named(iSerialNumber, coverwrite.serial_number, charp, \
+ S_IRUGO); \
+ MODULE_PARM_DESC(iSerialNumber, "SerialNumber string"); \
+ \
+ module_param_named(iManufacturer, coverwrite.manufacturer, charp, \
+ S_IRUGO); \
+ MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); \
+ \
+ module_param_named(iProduct, coverwrite.product, charp, S_IRUGO); \
+ MODULE_PARM_DESC(iProduct, "USB Product string")
+
+void usb_composite_overwrite_options(struct usb_composite_dev *cdev,
+ struct usb_composite_overwrite *covr);
+
+static inline u16 get_default_bcdDevice(void)
+{
+ u16 bcdDevice;
+
+ bcdDevice = bin2bcd((LINUX_VERSION_CODE >> 16 & 0xff)) << 8;
+ bcdDevice |= bin2bcd((LINUX_VERSION_CODE >> 8 & 0xff));
+ return bcdDevice;
+}
+
+struct usb_function_driver {
+ const char *name;
+ struct module *mod;
+ struct list_head list;
+ struct usb_function_instance *(*alloc_inst)(void);
+ struct usb_function *(*alloc_func)(struct usb_function_instance *inst);
+};
+
+struct usb_function_instance {
+ struct config_group group;
+ struct list_head cfs_list;
+ struct usb_function_driver *fd;
+ int (*set_inst_name)(struct usb_function_instance *inst,
+ const char *name);
+ void (*free_func_inst)(struct usb_function_instance *inst);
+};
+
+void usb_function_unregister(struct usb_function_driver *f);
+int usb_function_register(struct usb_function_driver *newf);
+void usb_put_function_instance(struct usb_function_instance *fi);
+void usb_put_function(struct usb_function *f);
+struct usb_function_instance *usb_get_function_instance(const char *name);
+struct usb_function *usb_get_function(struct usb_function_instance *fi);
+
+struct usb_configuration *usb_get_config(struct usb_composite_dev *cdev,
+ int val);
+int usb_add_config_only(struct usb_composite_dev *cdev,
+ struct usb_configuration *config);
+void usb_remove_function(struct usb_configuration *c, struct usb_function *f);
+
+#define DECLARE_USB_FUNCTION(_name, _inst_alloc, _func_alloc) \
+ static struct usb_function_driver _name ## usb_func = { \
+ .name = __stringify(_name), \
+ .mod = THIS_MODULE, \
+ .alloc_inst = _inst_alloc, \
+ .alloc_func = _func_alloc, \
+ }; \
+ MODULE_ALIAS("usbfunc:"__stringify(_name));
+
+#define DECLARE_USB_FUNCTION_INIT(_name, _inst_alloc, _func_alloc) \
+ DECLARE_USB_FUNCTION(_name, _inst_alloc, _func_alloc) \
+ static int __init _name ## mod_init(void) \
+ { \
+ return usb_function_register(&_name ## usb_func); \
+ } \
+ static void __exit _name ## mod_exit(void) \
+ { \
+ usb_function_unregister(&_name ## usb_func); \
+ } \
+ module_init(_name ## mod_init); \
+ module_exit(_name ## mod_exit)
+
+/* messaging utils */
+#define DBG(d, fmt, args...) \
+ dev_dbg(&(d)->gadget->dev , fmt , ## args)
+#define VDBG(d, fmt, args...) \
+ dev_vdbg(&(d)->gadget->dev , fmt , ## args)
+#define ERROR(d, fmt, args...) \
+ dev_err(&(d)->gadget->dev , fmt , ## args)
+#define WARNING(d, fmt, args...) \
+ dev_warn(&(d)->gadget->dev , fmt , ## args)
+#define INFO(d, fmt, args...) \
+ dev_info(&(d)->gadget->dev , fmt , ## args)
+
+#endif /* __LINUX_USB_COMPOSITE_H */
diff --git a/kernel/include/linux/usb/ehci-dbgp.h b/kernel/include/linux/usb/ehci-dbgp.h
new file mode 100644
index 000000000..7344d9e59
--- /dev/null
+++ b/kernel/include/linux/usb/ehci-dbgp.h
@@ -0,0 +1,83 @@
+/*
+ * Standalone EHCI usb debug driver
+ *
+ * Originally written by:
+ * Eric W. Biederman" <ebiederm@xmission.com> and
+ * Yinghai Lu <yhlu.kernel@gmail.com>
+ *
+ * Changes for early/late printk and HW errata:
+ * Jason Wessel <jason.wessel@windriver.com>
+ * Copyright (C) 2009 Wind River Systems, Inc.
+ *
+ */
+
+#ifndef __LINUX_USB_EHCI_DBGP_H
+#define __LINUX_USB_EHCI_DBGP_H
+
+#include <linux/console.h>
+#include <linux/types.h>
+
+/* Appendix C, Debug port ... intended for use with special "debug devices"
+ * that can help if there's no serial console. (nonstandard enumeration.)
+ */
+struct ehci_dbg_port {
+ u32 control;
+#define DBGP_OWNER (1<<30)
+#define DBGP_ENABLED (1<<28)
+#define DBGP_DONE (1<<16)
+#define DBGP_INUSE (1<<10)
+#define DBGP_ERRCODE(x) (((x)>>7)&0x07)
+# define DBGP_ERR_BAD 1
+# define DBGP_ERR_SIGNAL 2
+#define DBGP_ERROR (1<<6)
+#define DBGP_GO (1<<5)
+#define DBGP_OUT (1<<4)
+#define DBGP_LEN(x) (((x)>>0)&0x0f)
+ u32 pids;
+#define DBGP_PID_GET(x) (((x)>>16)&0xff)
+#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok))
+ u32 data03;
+ u32 data47;
+ u32 address;
+#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep))
+};
+
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+extern int early_dbgp_init(char *s);
+extern struct console early_dbgp_console;
+#endif /* CONFIG_EARLY_PRINTK_DBGP */
+
+struct usb_hcd;
+
+#ifdef CONFIG_XEN_DOM0
+extern int xen_dbgp_reset_prep(struct usb_hcd *);
+extern int xen_dbgp_external_startup(struct usb_hcd *);
+#else
+static inline int xen_dbgp_reset_prep(struct usb_hcd *hcd)
+{
+ return 1; /* Shouldn't this be 0? */
+}
+
+static inline int xen_dbgp_external_startup(struct usb_hcd *hcd)
+{
+ return -1;
+}
+#endif
+
+#ifdef CONFIG_EARLY_PRINTK_DBGP
+/* Call backs from ehci host driver to ehci debug driver */
+extern int dbgp_external_startup(struct usb_hcd *);
+extern int dbgp_reset_prep(struct usb_hcd *);
+#else
+static inline int dbgp_reset_prep(struct usb_hcd *hcd)
+{
+ return xen_dbgp_reset_prep(hcd);
+}
+
+static inline int dbgp_external_startup(struct usb_hcd *hcd)
+{
+ return xen_dbgp_external_startup(hcd);
+}
+#endif
+
+#endif /* __LINUX_USB_EHCI_DBGP_H */
diff --git a/kernel/include/linux/usb/ehci_def.h b/kernel/include/linux/usb/ehci_def.h
new file mode 100644
index 000000000..966889a20
--- /dev/null
+++ b/kernel/include/linux/usb/ehci_def.h
@@ -0,0 +1,195 @@
+/*
+ * Copyright (c) 2001-2002 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_USB_EHCI_DEF_H
+#define __LINUX_USB_EHCI_DEF_H
+
+#include <linux/usb/ehci-dbgp.h>
+
+/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
+
+/* Section 2.2 Host Controller Capability Registers */
+struct ehci_caps {
+ /* these fields are specified as 8 and 16 bit registers,
+ * but some hosts can't perform 8 or 16 bit PCI accesses.
+ * some hosts treat caplength and hciversion as parts of a 32-bit
+ * register, others treat them as two separate registers, this
+ * affects the memory map for big endian controllers.
+ */
+ u32 hc_capbase;
+#define HC_LENGTH(ehci, p) (0x00ff&((p) >> /* bits 7:0 / offset 00h */ \
+ (ehci_big_endian_capbase(ehci) ? 24 : 0)))
+#define HC_VERSION(ehci, p) (0xffff&((p) >> /* bits 31:16 / offset 02h */ \
+ (ehci_big_endian_capbase(ehci) ? 0 : 16)))
+ u32 hcs_params; /* HCSPARAMS - offset 0x4 */
+#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */
+#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */
+#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */
+#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */
+#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */
+#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */
+#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */
+
+ u32 hcc_params; /* HCCPARAMS - offset 0x8 */
+/* EHCI 1.1 addendum */
+#define HCC_32FRAME_PERIODIC_LIST(p) ((p)&(1 << 19))
+#define HCC_PER_PORT_CHANGE_EVENT(p) ((p)&(1 << 18))
+#define HCC_LPM(p) ((p)&(1 << 17))
+#define HCC_HW_PREFETCH(p) ((p)&(1 << 16))
+
+#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */
+#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */
+#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */
+#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */
+#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/
+#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */
+ u8 portroute[8]; /* nibbles for routing - offset 0xC */
+};
+
+
+/* Section 2.3 Host Controller Operational Registers */
+struct ehci_regs {
+
+ /* USBCMD: offset 0x00 */
+ u32 command;
+
+/* EHCI 1.1 addendum */
+#define CMD_HIRD (0xf<<24) /* host initiated resume duration */
+#define CMD_PPCEE (1<<15) /* per port change event enable */
+#define CMD_FSP (1<<14) /* fully synchronized prefetch */
+#define CMD_ASPE (1<<13) /* async schedule prefetch enable */
+#define CMD_PSPE (1<<12) /* periodic schedule prefetch enable */
+/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
+#define CMD_PARK (1<<11) /* enable "park" on async qh */
+#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */
+#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */
+#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */
+#define CMD_ASE (1<<5) /* async schedule enable */
+#define CMD_PSE (1<<4) /* periodic schedule enable */
+/* 3:2 is periodic frame list size */
+#define CMD_RESET (1<<1) /* reset HC not bus */
+#define CMD_RUN (1<<0) /* start/stop HC */
+
+ /* USBSTS: offset 0x04 */
+ u32 status;
+#define STS_PPCE_MASK (0xff<<16) /* Per-Port change event 1-16 */
+#define STS_ASS (1<<15) /* Async Schedule Status */
+#define STS_PSS (1<<14) /* Periodic Schedule Status */
+#define STS_RECL (1<<13) /* Reclamation */
+#define STS_HALT (1<<12) /* Not running (any reason) */
+/* some bits reserved */
+ /* these STS_* flags are also intr_enable bits (USBINTR) */
+#define STS_IAA (1<<5) /* Interrupted on async advance */
+#define STS_FATAL (1<<4) /* such as some PCI access errors */
+#define STS_FLR (1<<3) /* frame list rolled over */
+#define STS_PCD (1<<2) /* port change detect */
+#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */
+#define STS_INT (1<<0) /* "normal" completion (short, ...) */
+
+ /* USBINTR: offset 0x08 */
+ u32 intr_enable;
+
+ /* FRINDEX: offset 0x0C */
+ u32 frame_index; /* current microframe number */
+ /* CTRLDSSEGMENT: offset 0x10 */
+ u32 segment; /* address bits 63:32 if needed */
+ /* PERIODICLISTBASE: offset 0x14 */
+ u32 frame_list; /* points to periodic list */
+ /* ASYNCLISTADDR: offset 0x18 */
+ u32 async_next; /* address of next async queue head */
+
+ u32 reserved1[2];
+
+ /* TXFILLTUNING: offset 0x24 */
+ u32 txfill_tuning; /* TX FIFO Tuning register */
+#define TXFIFO_DEFAULT (8<<16) /* FIFO burst threshold 8 */
+
+ u32 reserved2[6];
+
+ /* CONFIGFLAG: offset 0x40 */
+ u32 configured_flag;
+#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
+
+ /* PORTSC: offset 0x44 */
+ u32 port_status[0]; /* up to N_PORTS */
+/* EHCI 1.1 addendum */
+#define PORTSC_SUSPEND_STS_ACK 0
+#define PORTSC_SUSPEND_STS_NYET 1
+#define PORTSC_SUSPEND_STS_STALL 2
+#define PORTSC_SUSPEND_STS_ERR 3
+
+#define PORT_DEV_ADDR (0x7f<<25) /* device address */
+#define PORT_SSTS (0x3<<23) /* suspend status */
+/* 31:23 reserved */
+#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */
+#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */
+#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */
+/* 19:16 for port testing */
+#define PORT_TEST(x) (((x)&0xf)<<16) /* Port Test Control */
+#define PORT_TEST_PKT PORT_TEST(0x4) /* Port Test Control - packet test */
+#define PORT_TEST_FORCE PORT_TEST(0x5) /* Port Test Control - force enable */
+#define PORT_LED_OFF (0<<14)
+#define PORT_LED_AMBER (1<<14)
+#define PORT_LED_GREEN (2<<14)
+#define PORT_LED_MASK (3<<14)
+#define PORT_OWNER (1<<13) /* true: companion hc owns this port */
+#define PORT_POWER (1<<12) /* true: has power (see PPC) */
+#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */
+/* 11:10 for detecting lowspeed devices (reset vs release ownership) */
+/* 9 reserved */
+#define PORT_LPM (1<<9) /* LPM transaction */
+#define PORT_RESET (1<<8) /* reset port */
+#define PORT_SUSPEND (1<<7) /* suspend port */
+#define PORT_RESUME (1<<6) /* resume it */
+#define PORT_OCC (1<<5) /* over current change */
+#define PORT_OC (1<<4) /* over current active */
+#define PORT_PEC (1<<3) /* port enable change */
+#define PORT_PE (1<<2) /* port enable */
+#define PORT_CSC (1<<1) /* connect status change */
+#define PORT_CONNECT (1<<0) /* device connected */
+#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
+
+ u32 reserved3[9];
+
+ /* USBMODE: offset 0x68 */
+ u32 usbmode; /* USB Device mode */
+#define USBMODE_SDIS (1<<3) /* Stream disable */
+#define USBMODE_BE (1<<2) /* BE/LE endianness select */
+#define USBMODE_CM_HC (3<<0) /* host controller mode */
+#define USBMODE_CM_IDLE (0<<0) /* idle state */
+
+ u32 reserved4[6];
+
+/* Moorestown has some non-standard registers, partially due to the fact that
+ * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to
+ * PORTSCx
+ */
+ /* HOSTPC: offset 0x84 */
+ u32 hostpc[1]; /* HOSTPC extension */
+#define HOSTPC_PHCD (1<<22) /* Phy clock disable */
+#define HOSTPC_PSPD (3<<25) /* Port speed detection */
+
+ u32 reserved5[16];
+
+ /* USBMODE_EX: offset 0xc8 */
+ u32 usbmode_ex; /* USB Device mode extension */
+#define USBMODE_EX_VBPS (1<<5) /* VBus Power Select On */
+#define USBMODE_EX_HC (3<<0) /* host controller mode */
+};
+
+#endif /* __LINUX_USB_EHCI_DEF_H */
diff --git a/kernel/include/linux/usb/ehci_pdriver.h b/kernel/include/linux/usb/ehci_pdriver.h
new file mode 100644
index 000000000..db0431b39
--- /dev/null
+++ b/kernel/include/linux/usb/ehci_pdriver.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __USB_CORE_EHCI_PDRIVER_H
+#define __USB_CORE_EHCI_PDRIVER_H
+
+struct platform_device;
+struct usb_hcd;
+
+/**
+ * struct usb_ehci_pdata - platform_data for generic ehci driver
+ *
+ * @caps_offset: offset of the EHCI Capability Registers to the start of
+ * the io memory region provided to the driver.
+ * @has_tt: set to 1 if TT is integrated in root hub.
+ * @port_power_on: set to 1 if the controller needs a power up after
+ * initialization.
+ * @port_power_off: set to 1 if the controller needs to be powered down
+ * after initialization.
+ * @no_io_watchdog: set to 1 if the controller does not need the I/O
+ * watchdog to run.
+ * @reset_on_resume: set to 1 if the controller needs to be reset after
+ * a suspend / resume cycle (but can't detect that itself).
+ *
+ * These are general configuration options for the EHCI controller. All of
+ * these options are activating more or less workarounds for some hardware.
+ */
+struct usb_ehci_pdata {
+ int caps_offset;
+ unsigned has_tt:1;
+ unsigned has_synopsys_hc_bug:1;
+ unsigned big_endian_desc:1;
+ unsigned big_endian_mmio:1;
+ unsigned no_io_watchdog:1;
+ unsigned reset_on_resume:1;
+ unsigned dma_mask_64:1;
+
+ /* Turn on all power and clocks */
+ int (*power_on)(struct platform_device *pdev);
+ /* Turn off all power and clocks */
+ void (*power_off)(struct platform_device *pdev);
+ /* Turn on only VBUS suspend power and hotplug detection,
+ * turn off everything else */
+ void (*power_suspend)(struct platform_device *pdev);
+ int (*pre_setup)(struct usb_hcd *hcd);
+};
+
+#endif /* __USB_CORE_EHCI_PDRIVER_H */
diff --git a/kernel/include/linux/usb/ezusb.h b/kernel/include/linux/usb/ezusb.h
new file mode 100644
index 000000000..639ee4577
--- /dev/null
+++ b/kernel/include/linux/usb/ezusb.h
@@ -0,0 +1,8 @@
+#ifndef __EZUSB_H
+#define __EZUSB_H
+
+extern int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit);
+extern int ezusb_fx1_ihex_firmware_download(struct usb_device *dev,
+ const char *firmware_path);
+
+#endif /* __EZUSB_H */
diff --git a/kernel/include/linux/usb/functionfs.h b/kernel/include/linux/usb/functionfs.h
new file mode 100644
index 000000000..71190663f
--- /dev/null
+++ b/kernel/include/linux/usb/functionfs.h
@@ -0,0 +1,6 @@
+#ifndef __LINUX_FUNCTIONFS_H__
+#define __LINUX_FUNCTIONFS_H__ 1
+
+#include <uapi/linux/usb/functionfs.h>
+
+#endif
diff --git a/kernel/include/linux/usb/g_hid.h b/kernel/include/linux/usb/g_hid.h
new file mode 100644
index 000000000..50f5745df
--- /dev/null
+++ b/kernel/include/linux/usb/g_hid.h
@@ -0,0 +1,32 @@
+/*
+ * g_hid.h -- Header file for USB HID gadget driver
+ *
+ * Copyright (C) 2010 Fabien Chouteau <fabien.chouteau@barco.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_USB_G_HID_H
+#define __LINUX_USB_G_HID_H
+
+struct hidg_func_descriptor {
+ unsigned char subclass;
+ unsigned char protocol;
+ unsigned short report_length;
+ unsigned short report_desc_length;
+ unsigned char report_desc[];
+};
+
+#endif /* __LINUX_USB_G_HID_H */
diff --git a/kernel/include/linux/usb/gadget.h b/kernel/include/linux/usb/gadget.h
new file mode 100644
index 000000000..4f3dfb7d0
--- /dev/null
+++ b/kernel/include/linux/usb/gadget.h
@@ -0,0 +1,1054 @@
+/*
+ * <linux/usb/gadget.h>
+ *
+ * We call the USB code inside a Linux-based peripheral device a "gadget"
+ * driver, except for the hardware-specific bus glue. One USB host can
+ * master many USB gadgets, but the gadgets are only slaved to one host.
+ *
+ *
+ * (C) Copyright 2002-2004 by David Brownell
+ * All Rights Reserved.
+ *
+ * This software is licensed under the GNU GPL version 2.
+ */
+
+#ifndef __LINUX_USB_GADGET_H
+#define __LINUX_USB_GADGET_H
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/scatterlist.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+#include <linux/usb/ch9.h>
+
+struct usb_ep;
+
+/**
+ * struct usb_request - describes one i/o request
+ * @buf: Buffer used for data. Always provide this; some controllers
+ * only use PIO, or don't use DMA for some endpoints.
+ * @dma: DMA address corresponding to 'buf'. If you don't set this
+ * field, and the usb controller needs one, it is responsible
+ * for mapping and unmapping the buffer.
+ * @sg: a scatterlist for SG-capable controllers.
+ * @num_sgs: number of SG entries
+ * @num_mapped_sgs: number of SG entries mapped to DMA (internal)
+ * @length: Length of that data
+ * @stream_id: The stream id, when USB3.0 bulk streams are being used
+ * @no_interrupt: If true, hints that no completion irq is needed.
+ * Helpful sometimes with deep request queues that are handled
+ * directly by DMA controllers.
+ * @zero: If true, when writing data, makes the last packet be "short"
+ * by adding a zero length packet as needed;
+ * @short_not_ok: When reading data, makes short packets be
+ * treated as errors (queue stops advancing till cleanup).
+ * @complete: Function called when request completes, so this request and
+ * its buffer may be re-used. The function will always be called with
+ * interrupts disabled, and it must not sleep.
+ * Reads terminate with a short packet, or when the buffer fills,
+ * whichever comes first. When writes terminate, some data bytes
+ * will usually still be in flight (often in a hardware fifo).
+ * Errors (for reads or writes) stop the queue from advancing
+ * until the completion function returns, so that any transfers
+ * invalidated by the error may first be dequeued.
+ * @context: For use by the completion callback
+ * @list: For use by the gadget driver.
+ * @status: Reports completion code, zero or a negative errno.
+ * Normally, faults block the transfer queue from advancing until
+ * the completion callback returns.
+ * Code "-ESHUTDOWN" indicates completion caused by device disconnect,
+ * or when the driver disabled the endpoint.
+ * @actual: Reports bytes transferred to/from the buffer. For reads (OUT
+ * transfers) this may be less than the requested length. If the
+ * short_not_ok flag is set, short reads are treated as errors
+ * even when status otherwise indicates successful completion.
+ * Note that for writes (IN transfers) some data bytes may still
+ * reside in a device-side FIFO when the request is reported as
+ * complete.
+ *
+ * These are allocated/freed through the endpoint they're used with. The
+ * hardware's driver can add extra per-request data to the memory it returns,
+ * which often avoids separate memory allocations (potential failures),
+ * later when the request is queued.
+ *
+ * Request flags affect request handling, such as whether a zero length
+ * packet is written (the "zero" flag), whether a short read should be
+ * treated as an error (blocking request queue advance, the "short_not_ok"
+ * flag), or hinting that an interrupt is not required (the "no_interrupt"
+ * flag, for use with deep request queues).
+ *
+ * Bulk endpoints can use any size buffers, and can also be used for interrupt
+ * transfers. interrupt-only endpoints can be much less functional.
+ *
+ * NOTE: this is analogous to 'struct urb' on the host side, except that
+ * it's thinner and promotes more pre-allocation.
+ */
+
+struct usb_request {
+ void *buf;
+ unsigned length;
+ dma_addr_t dma;
+
+ struct scatterlist *sg;
+ unsigned num_sgs;
+ unsigned num_mapped_sgs;
+
+ unsigned stream_id:16;
+ unsigned no_interrupt:1;
+ unsigned zero:1;
+ unsigned short_not_ok:1;
+
+ void (*complete)(struct usb_ep *ep,
+ struct usb_request *req);
+ void *context;
+ struct list_head list;
+
+ int status;
+ unsigned actual;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* endpoint-specific parts of the api to the usb controller hardware.
+ * unlike the urb model, (de)multiplexing layers are not required.
+ * (so this api could slash overhead if used on the host side...)
+ *
+ * note that device side usb controllers commonly differ in how many
+ * endpoints they support, as well as their capabilities.
+ */
+struct usb_ep_ops {
+ int (*enable) (struct usb_ep *ep,
+ const struct usb_endpoint_descriptor *desc);
+ int (*disable) (struct usb_ep *ep);
+
+ struct usb_request *(*alloc_request) (struct usb_ep *ep,
+ gfp_t gfp_flags);
+ void (*free_request) (struct usb_ep *ep, struct usb_request *req);
+
+ int (*queue) (struct usb_ep *ep, struct usb_request *req,
+ gfp_t gfp_flags);
+ int (*dequeue) (struct usb_ep *ep, struct usb_request *req);
+
+ int (*set_halt) (struct usb_ep *ep, int value);
+ int (*set_wedge) (struct usb_ep *ep);
+
+ int (*fifo_status) (struct usb_ep *ep);
+ void (*fifo_flush) (struct usb_ep *ep);
+};
+
+/**
+ * struct usb_ep - device side representation of USB endpoint
+ * @name:identifier for the endpoint, such as "ep-a" or "ep9in-bulk"
+ * @ops: Function pointers used to access hardware-specific operations.
+ * @ep_list:the gadget's ep_list holds all of its endpoints
+ * @maxpacket:The maximum packet size used on this endpoint. The initial
+ * value can sometimes be reduced (hardware allowing), according to
+ * the endpoint descriptor used to configure the endpoint.
+ * @maxpacket_limit:The maximum packet size value which can be handled by this
+ * endpoint. It's set once by UDC driver when endpoint is initialized, and
+ * should not be changed. Should not be confused with maxpacket.
+ * @max_streams: The maximum number of streams supported
+ * by this EP (0 - 16, actual number is 2^n)
+ * @mult: multiplier, 'mult' value for SS Isoc EPs
+ * @maxburst: the maximum number of bursts supported by this EP (for usb3)
+ * @driver_data:for use by the gadget driver.
+ * @address: used to identify the endpoint when finding descriptor that
+ * matches connection speed
+ * @desc: endpoint descriptor. This pointer is set before the endpoint is
+ * enabled and remains valid until the endpoint is disabled.
+ * @comp_desc: In case of SuperSpeed support, this is the endpoint companion
+ * descriptor that is used to configure the endpoint
+ *
+ * the bus controller driver lists all the general purpose endpoints in
+ * gadget->ep_list. the control endpoint (gadget->ep0) is not in that list,
+ * and is accessed only in response to a driver setup() callback.
+ */
+struct usb_ep {
+ void *driver_data;
+
+ const char *name;
+ const struct usb_ep_ops *ops;
+ struct list_head ep_list;
+ unsigned maxpacket:16;
+ unsigned maxpacket_limit:16;
+ unsigned max_streams:16;
+ unsigned mult:2;
+ unsigned maxburst:5;
+ u8 address;
+ const struct usb_endpoint_descriptor *desc;
+ const struct usb_ss_ep_comp_descriptor *comp_desc;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * usb_ep_set_maxpacket_limit - set maximum packet size limit for endpoint
+ * @ep:the endpoint being configured
+ * @maxpacket_limit:value of maximum packet size limit
+ *
+ * This function should be used only in UDC drivers to initialize endpoint
+ * (usually in probe function).
+ */
+static inline void usb_ep_set_maxpacket_limit(struct usb_ep *ep,
+ unsigned maxpacket_limit)
+{
+ ep->maxpacket_limit = maxpacket_limit;
+ ep->maxpacket = maxpacket_limit;
+}
+
+/**
+ * usb_ep_enable - configure endpoint, making it usable
+ * @ep:the endpoint being configured. may not be the endpoint named "ep0".
+ * drivers discover endpoints through the ep_list of a usb_gadget.
+ *
+ * When configurations are set, or when interface settings change, the driver
+ * will enable or disable the relevant endpoints. while it is enabled, an
+ * endpoint may be used for i/o until the driver receives a disconnect() from
+ * the host or until the endpoint is disabled.
+ *
+ * the ep0 implementation (which calls this routine) must ensure that the
+ * hardware capabilities of each endpoint match the descriptor provided
+ * for it. for example, an endpoint named "ep2in-bulk" would be usable
+ * for interrupt transfers as well as bulk, but it likely couldn't be used
+ * for iso transfers or for endpoint 14. some endpoints are fully
+ * configurable, with more generic names like "ep-a". (remember that for
+ * USB, "in" means "towards the USB master".)
+ *
+ * returns zero, or a negative error code.
+ */
+static inline int usb_ep_enable(struct usb_ep *ep)
+{
+ return ep->ops->enable(ep, ep->desc);
+}
+
+/**
+ * usb_ep_disable - endpoint is no longer usable
+ * @ep:the endpoint being unconfigured. may not be the endpoint named "ep0".
+ *
+ * no other task may be using this endpoint when this is called.
+ * any pending and uncompleted requests will complete with status
+ * indicating disconnect (-ESHUTDOWN) before this call returns.
+ * gadget drivers must call usb_ep_enable() again before queueing
+ * requests to the endpoint.
+ *
+ * returns zero, or a negative error code.
+ */
+static inline int usb_ep_disable(struct usb_ep *ep)
+{
+ return ep->ops->disable(ep);
+}
+
+/**
+ * usb_ep_alloc_request - allocate a request object to use with this endpoint
+ * @ep:the endpoint to be used with with the request
+ * @gfp_flags:GFP_* flags to use
+ *
+ * Request objects must be allocated with this call, since they normally
+ * need controller-specific setup and may even need endpoint-specific
+ * resources such as allocation of DMA descriptors.
+ * Requests may be submitted with usb_ep_queue(), and receive a single
+ * completion callback. Free requests with usb_ep_free_request(), when
+ * they are no longer needed.
+ *
+ * Returns the request, or null if one could not be allocated.
+ */
+static inline struct usb_request *usb_ep_alloc_request(struct usb_ep *ep,
+ gfp_t gfp_flags)
+{
+ return ep->ops->alloc_request(ep, gfp_flags);
+}
+
+/**
+ * usb_ep_free_request - frees a request object
+ * @ep:the endpoint associated with the request
+ * @req:the request being freed
+ *
+ * Reverses the effect of usb_ep_alloc_request().
+ * Caller guarantees the request is not queued, and that it will
+ * no longer be requeued (or otherwise used).
+ */
+static inline void usb_ep_free_request(struct usb_ep *ep,
+ struct usb_request *req)
+{
+ ep->ops->free_request(ep, req);
+}
+
+/**
+ * usb_ep_queue - queues (submits) an I/O request to an endpoint.
+ * @ep:the endpoint associated with the request
+ * @req:the request being submitted
+ * @gfp_flags: GFP_* flags to use in case the lower level driver couldn't
+ * pre-allocate all necessary memory with the request.
+ *
+ * This tells the device controller to perform the specified request through
+ * that endpoint (reading or writing a buffer). When the request completes,
+ * including being canceled by usb_ep_dequeue(), the request's completion
+ * routine is called to return the request to the driver. Any endpoint
+ * (except control endpoints like ep0) may have more than one transfer
+ * request queued; they complete in FIFO order. Once a gadget driver
+ * submits a request, that request may not be examined or modified until it
+ * is given back to that driver through the completion callback.
+ *
+ * Each request is turned into one or more packets. The controller driver
+ * never merges adjacent requests into the same packet. OUT transfers
+ * will sometimes use data that's already buffered in the hardware.
+ * Drivers can rely on the fact that the first byte of the request's buffer
+ * always corresponds to the first byte of some USB packet, for both
+ * IN and OUT transfers.
+ *
+ * Bulk endpoints can queue any amount of data; the transfer is packetized
+ * automatically. The last packet will be short if the request doesn't fill it
+ * out completely. Zero length packets (ZLPs) should be avoided in portable
+ * protocols since not all usb hardware can successfully handle zero length
+ * packets. (ZLPs may be explicitly written, and may be implicitly written if
+ * the request 'zero' flag is set.) Bulk endpoints may also be used
+ * for interrupt transfers; but the reverse is not true, and some endpoints
+ * won't support every interrupt transfer. (Such as 768 byte packets.)
+ *
+ * Interrupt-only endpoints are less functional than bulk endpoints, for
+ * example by not supporting queueing or not handling buffers that are
+ * larger than the endpoint's maxpacket size. They may also treat data
+ * toggle differently.
+ *
+ * Control endpoints ... after getting a setup() callback, the driver queues
+ * one response (even if it would be zero length). That enables the
+ * status ack, after transferring data as specified in the response. Setup
+ * functions may return negative error codes to generate protocol stalls.
+ * (Note that some USB device controllers disallow protocol stall responses
+ * in some cases.) When control responses are deferred (the response is
+ * written after the setup callback returns), then usb_ep_set_halt() may be
+ * used on ep0 to trigger protocol stalls. Depending on the controller,
+ * it may not be possible to trigger a status-stage protocol stall when the
+ * data stage is over, that is, from within the response's completion
+ * routine.
+ *
+ * For periodic endpoints, like interrupt or isochronous ones, the usb host
+ * arranges to poll once per interval, and the gadget driver usually will
+ * have queued some data to transfer at that time.
+ *
+ * Returns zero, or a negative error code. Endpoints that are not enabled
+ * report errors; errors will also be
+ * reported when the usb peripheral is disconnected.
+ */
+static inline int usb_ep_queue(struct usb_ep *ep,
+ struct usb_request *req, gfp_t gfp_flags)
+{
+ return ep->ops->queue(ep, req, gfp_flags);
+}
+
+/**
+ * usb_ep_dequeue - dequeues (cancels, unlinks) an I/O request from an endpoint
+ * @ep:the endpoint associated with the request
+ * @req:the request being canceled
+ *
+ * If the request is still active on the endpoint, it is dequeued and its
+ * completion routine is called (with status -ECONNRESET); else a negative
+ * error code is returned. This is guaranteed to happen before the call to
+ * usb_ep_dequeue() returns.
+ *
+ * Note that some hardware can't clear out write fifos (to unlink the request
+ * at the head of the queue) except as part of disconnecting from usb. Such
+ * restrictions prevent drivers from supporting configuration changes,
+ * even to configuration zero (a "chapter 9" requirement).
+ */
+static inline int usb_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+ return ep->ops->dequeue(ep, req);
+}
+
+/**
+ * usb_ep_set_halt - sets the endpoint halt feature.
+ * @ep: the non-isochronous endpoint being stalled
+ *
+ * Use this to stall an endpoint, perhaps as an error report.
+ * Except for control endpoints,
+ * the endpoint stays halted (will not stream any data) until the host
+ * clears this feature; drivers may need to empty the endpoint's request
+ * queue first, to make sure no inappropriate transfers happen.
+ *
+ * Note that while an endpoint CLEAR_FEATURE will be invisible to the
+ * gadget driver, a SET_INTERFACE will not be. To reset endpoints for the
+ * current altsetting, see usb_ep_clear_halt(). When switching altsettings,
+ * it's simplest to use usb_ep_enable() or usb_ep_disable() for the endpoints.
+ *
+ * Returns zero, or a negative error code. On success, this call sets
+ * underlying hardware state that blocks data transfers.
+ * Attempts to halt IN endpoints will fail (returning -EAGAIN) if any
+ * transfer requests are still queued, or if the controller hardware
+ * (usually a FIFO) still holds bytes that the host hasn't collected.
+ */
+static inline int usb_ep_set_halt(struct usb_ep *ep)
+{
+ return ep->ops->set_halt(ep, 1);
+}
+
+/**
+ * usb_ep_clear_halt - clears endpoint halt, and resets toggle
+ * @ep:the bulk or interrupt endpoint being reset
+ *
+ * Use this when responding to the standard usb "set interface" request,
+ * for endpoints that aren't reconfigured, after clearing any other state
+ * in the endpoint's i/o queue.
+ *
+ * Returns zero, or a negative error code. On success, this call clears
+ * the underlying hardware state reflecting endpoint halt and data toggle.
+ * Note that some hardware can't support this request (like pxa2xx_udc),
+ * and accordingly can't correctly implement interface altsettings.
+ */
+static inline int usb_ep_clear_halt(struct usb_ep *ep)
+{
+ return ep->ops->set_halt(ep, 0);
+}
+
+/**
+ * usb_ep_set_wedge - sets the halt feature and ignores clear requests
+ * @ep: the endpoint being wedged
+ *
+ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT)
+ * requests. If the gadget driver clears the halt status, it will
+ * automatically unwedge the endpoint.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int
+usb_ep_set_wedge(struct usb_ep *ep)
+{
+ if (ep->ops->set_wedge)
+ return ep->ops->set_wedge(ep);
+ else
+ return ep->ops->set_halt(ep, 1);
+}
+
+/**
+ * usb_ep_fifo_status - returns number of bytes in fifo, or error
+ * @ep: the endpoint whose fifo status is being checked.
+ *
+ * FIFO endpoints may have "unclaimed data" in them in certain cases,
+ * such as after aborted transfers. Hosts may not have collected all
+ * the IN data written by the gadget driver (and reported by a request
+ * completion). The gadget driver may not have collected all the data
+ * written OUT to it by the host. Drivers that need precise handling for
+ * fault reporting or recovery may need to use this call.
+ *
+ * This returns the number of such bytes in the fifo, or a negative
+ * errno if the endpoint doesn't use a FIFO or doesn't support such
+ * precise handling.
+ */
+static inline int usb_ep_fifo_status(struct usb_ep *ep)
+{
+ if (ep->ops->fifo_status)
+ return ep->ops->fifo_status(ep);
+ else
+ return -EOPNOTSUPP;
+}
+
+/**
+ * usb_ep_fifo_flush - flushes contents of a fifo
+ * @ep: the endpoint whose fifo is being flushed.
+ *
+ * This call may be used to flush the "unclaimed data" that may exist in
+ * an endpoint fifo after abnormal transaction terminations. The call
+ * must never be used except when endpoint is not being used for any
+ * protocol translation.
+ */
+static inline void usb_ep_fifo_flush(struct usb_ep *ep)
+{
+ if (ep->ops->fifo_flush)
+ ep->ops->fifo_flush(ep);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+struct usb_dcd_config_params {
+ __u8 bU1devExitLat; /* U1 Device exit Latency */
+#define USB_DEFAULT_U1_DEV_EXIT_LAT 0x01 /* Less then 1 microsec */
+ __le16 bU2DevExitLat; /* U2 Device exit Latency */
+#define USB_DEFAULT_U2_DEV_EXIT_LAT 0x1F4 /* Less then 500 microsec */
+};
+
+
+struct usb_gadget;
+struct usb_gadget_driver;
+struct usb_udc;
+
+/* the rest of the api to the controller hardware: device operations,
+ * which don't involve endpoints (or i/o).
+ */
+struct usb_gadget_ops {
+ int (*get_frame)(struct usb_gadget *);
+ int (*wakeup)(struct usb_gadget *);
+ int (*set_selfpowered) (struct usb_gadget *, int is_selfpowered);
+ int (*vbus_session) (struct usb_gadget *, int is_active);
+ int (*vbus_draw) (struct usb_gadget *, unsigned mA);
+ int (*pullup) (struct usb_gadget *, int is_on);
+ int (*ioctl)(struct usb_gadget *,
+ unsigned code, unsigned long param);
+ void (*get_config_params)(struct usb_dcd_config_params *);
+ int (*udc_start)(struct usb_gadget *,
+ struct usb_gadget_driver *);
+ int (*udc_stop)(struct usb_gadget *);
+};
+
+/**
+ * struct usb_gadget - represents a usb slave device
+ * @work: (internal use) Workqueue to be used for sysfs_notify()
+ * @udc: struct usb_udc pointer for this gadget
+ * @ops: Function pointers used to access hardware-specific operations.
+ * @ep0: Endpoint zero, used when reading or writing responses to
+ * driver setup() requests
+ * @ep_list: List of other endpoints supported by the device.
+ * @speed: Speed of current connection to USB host.
+ * @max_speed: Maximal speed the UDC can handle. UDC must support this
+ * and all slower speeds.
+ * @state: the state we are now (attached, suspended, configured, etc)
+ * @name: Identifies the controller hardware type. Used in diagnostics
+ * and sometimes configuration.
+ * @dev: Driver model state for this abstract device.
+ * @out_epnum: last used out ep number
+ * @in_epnum: last used in ep number
+ * @sg_supported: true if we can handle scatter-gather
+ * @is_otg: True if the USB device port uses a Mini-AB jack, so that the
+ * gadget driver must provide a USB OTG descriptor.
+ * @is_a_peripheral: False unless is_otg, the "A" end of a USB cable
+ * is in the Mini-AB jack, and HNP has been used to switch roles
+ * so that the "A" device currently acts as A-Peripheral, not A-Host.
+ * @a_hnp_support: OTG device feature flag, indicating that the A-Host
+ * supports HNP at this port.
+ * @a_alt_hnp_support: OTG device feature flag, indicating that the A-Host
+ * only supports HNP on a different root port.
+ * @b_hnp_enable: OTG device feature flag, indicating that the A-Host
+ * enabled HNP support.
+ * @quirk_ep_out_aligned_size: epout requires buffer size to be aligned to
+ * MaxPacketSize.
+ * @is_selfpowered: if the gadget is self-powered.
+ *
+ * Gadgets have a mostly-portable "gadget driver" implementing device
+ * functions, handling all usb configurations and interfaces. Gadget
+ * drivers talk to hardware-specific code indirectly, through ops vectors.
+ * That insulates the gadget driver from hardware details, and packages
+ * the hardware endpoints through generic i/o queues. The "usb_gadget"
+ * and "usb_ep" interfaces provide that insulation from the hardware.
+ *
+ * Except for the driver data, all fields in this structure are
+ * read-only to the gadget driver. That driver data is part of the
+ * "driver model" infrastructure in 2.6 (and later) kernels, and for
+ * earlier systems is grouped in a similar structure that's not known
+ * to the rest of the kernel.
+ *
+ * Values of the three OTG device feature flags are updated before the
+ * setup() call corresponding to USB_REQ_SET_CONFIGURATION, and before
+ * driver suspend() calls. They are valid only when is_otg, and when the
+ * device is acting as a B-Peripheral (so is_a_peripheral is false).
+ */
+struct usb_gadget {
+ struct work_struct work;
+ struct usb_udc *udc;
+ /* readonly to gadget driver */
+ const struct usb_gadget_ops *ops;
+ struct usb_ep *ep0;
+ struct list_head ep_list; /* of usb_ep */
+ enum usb_device_speed speed;
+ enum usb_device_speed max_speed;
+ enum usb_device_state state;
+ const char *name;
+ struct device dev;
+ unsigned out_epnum;
+ unsigned in_epnum;
+
+ unsigned sg_supported:1;
+ unsigned is_otg:1;
+ unsigned is_a_peripheral:1;
+ unsigned b_hnp_enable:1;
+ unsigned a_hnp_support:1;
+ unsigned a_alt_hnp_support:1;
+ unsigned quirk_ep_out_aligned_size:1;
+ unsigned is_selfpowered:1;
+};
+#define work_to_gadget(w) (container_of((w), struct usb_gadget, work))
+
+static inline void set_gadget_data(struct usb_gadget *gadget, void *data)
+ { dev_set_drvdata(&gadget->dev, data); }
+static inline void *get_gadget_data(struct usb_gadget *gadget)
+ { return dev_get_drvdata(&gadget->dev); }
+static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev)
+{
+ return container_of(dev, struct usb_gadget, dev);
+}
+
+/* iterates the non-control endpoints; 'tmp' is a struct usb_ep pointer */
+#define gadget_for_each_ep(tmp, gadget) \
+ list_for_each_entry(tmp, &(gadget)->ep_list, ep_list)
+
+
+/**
+ * usb_ep_align_maybe - returns @len aligned to ep's maxpacketsize if gadget
+ * requires quirk_ep_out_aligned_size, otherwise reguens len.
+ * @g: controller to check for quirk
+ * @ep: the endpoint whose maxpacketsize is used to align @len
+ * @len: buffer size's length to align to @ep's maxpacketsize
+ *
+ * This helper is used in case it's required for any reason to check and maybe
+ * align buffer's size to an ep's maxpacketsize.
+ */
+static inline size_t
+usb_ep_align_maybe(struct usb_gadget *g, struct usb_ep *ep, size_t len)
+{
+ return !g->quirk_ep_out_aligned_size ? len :
+ round_up(len, (size_t)ep->desc->wMaxPacketSize);
+}
+
+/**
+ * gadget_is_dualspeed - return true iff the hardware handles high speed
+ * @g: controller that might support both high and full speeds
+ */
+static inline int gadget_is_dualspeed(struct usb_gadget *g)
+{
+ return g->max_speed >= USB_SPEED_HIGH;
+}
+
+/**
+ * gadget_is_superspeed() - return true if the hardware handles superspeed
+ * @g: controller that might support superspeed
+ */
+static inline int gadget_is_superspeed(struct usb_gadget *g)
+{
+ return g->max_speed >= USB_SPEED_SUPER;
+}
+
+/**
+ * gadget_is_otg - return true iff the hardware is OTG-ready
+ * @g: controller that might have a Mini-AB connector
+ *
+ * This is a runtime test, since kernels with a USB-OTG stack sometimes
+ * run on boards which only have a Mini-B (or Mini-A) connector.
+ */
+static inline int gadget_is_otg(struct usb_gadget *g)
+{
+#ifdef CONFIG_USB_OTG
+ return g->is_otg;
+#else
+ return 0;
+#endif
+}
+
+/**
+ * usb_gadget_frame_number - returns the current frame number
+ * @gadget: controller that reports the frame number
+ *
+ * Returns the usb frame number, normally eleven bits from a SOF packet,
+ * or negative errno if this device doesn't support this capability.
+ */
+static inline int usb_gadget_frame_number(struct usb_gadget *gadget)
+{
+ return gadget->ops->get_frame(gadget);
+}
+
+/**
+ * usb_gadget_wakeup - tries to wake up the host connected to this gadget
+ * @gadget: controller used to wake up the host
+ *
+ * Returns zero on success, else negative error code if the hardware
+ * doesn't support such attempts, or its support has not been enabled
+ * by the usb host. Drivers must return device descriptors that report
+ * their ability to support this, or hosts won't enable it.
+ *
+ * This may also try to use SRP to wake the host and start enumeration,
+ * even if OTG isn't otherwise in use. OTG devices may also start
+ * remote wakeup even when hosts don't explicitly enable it.
+ */
+static inline int usb_gadget_wakeup(struct usb_gadget *gadget)
+{
+ if (!gadget->ops->wakeup)
+ return -EOPNOTSUPP;
+ return gadget->ops->wakeup(gadget);
+}
+
+/**
+ * usb_gadget_set_selfpowered - sets the device selfpowered feature.
+ * @gadget:the device being declared as self-powered
+ *
+ * this affects the device status reported by the hardware driver
+ * to reflect that it now has a local power supply.
+ *
+ * returns zero on success, else negative errno.
+ */
+static inline int usb_gadget_set_selfpowered(struct usb_gadget *gadget)
+{
+ if (!gadget->ops->set_selfpowered)
+ return -EOPNOTSUPP;
+ return gadget->ops->set_selfpowered(gadget, 1);
+}
+
+/**
+ * usb_gadget_clear_selfpowered - clear the device selfpowered feature.
+ * @gadget:the device being declared as bus-powered
+ *
+ * this affects the device status reported by the hardware driver.
+ * some hardware may not support bus-powered operation, in which
+ * case this feature's value can never change.
+ *
+ * returns zero on success, else negative errno.
+ */
+static inline int usb_gadget_clear_selfpowered(struct usb_gadget *gadget)
+{
+ if (!gadget->ops->set_selfpowered)
+ return -EOPNOTSUPP;
+ return gadget->ops->set_selfpowered(gadget, 0);
+}
+
+/**
+ * usb_gadget_vbus_connect - Notify controller that VBUS is powered
+ * @gadget:The device which now has VBUS power.
+ * Context: can sleep
+ *
+ * This call is used by a driver for an external transceiver (or GPIO)
+ * that detects a VBUS power session starting. Common responses include
+ * resuming the controller, activating the D+ (or D-) pullup to let the
+ * host detect that a USB device is attached, and starting to draw power
+ * (8mA or possibly more, especially after SET_CONFIGURATION).
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int usb_gadget_vbus_connect(struct usb_gadget *gadget)
+{
+ if (!gadget->ops->vbus_session)
+ return -EOPNOTSUPP;
+ return gadget->ops->vbus_session(gadget, 1);
+}
+
+/**
+ * usb_gadget_vbus_draw - constrain controller's VBUS power usage
+ * @gadget:The device whose VBUS usage is being described
+ * @mA:How much current to draw, in milliAmperes. This should be twice
+ * the value listed in the configuration descriptor bMaxPower field.
+ *
+ * This call is used by gadget drivers during SET_CONFIGURATION calls,
+ * reporting how much power the device may consume. For example, this
+ * could affect how quickly batteries are recharged.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+ if (!gadget->ops->vbus_draw)
+ return -EOPNOTSUPP;
+ return gadget->ops->vbus_draw(gadget, mA);
+}
+
+/**
+ * usb_gadget_vbus_disconnect - notify controller about VBUS session end
+ * @gadget:the device whose VBUS supply is being described
+ * Context: can sleep
+ *
+ * This call is used by a driver for an external transceiver (or GPIO)
+ * that detects a VBUS power session ending. Common responses include
+ * reversing everything done in usb_gadget_vbus_connect().
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int usb_gadget_vbus_disconnect(struct usb_gadget *gadget)
+{
+ if (!gadget->ops->vbus_session)
+ return -EOPNOTSUPP;
+ return gadget->ops->vbus_session(gadget, 0);
+}
+
+/**
+ * usb_gadget_connect - software-controlled connect to USB host
+ * @gadget:the peripheral being connected
+ *
+ * Enables the D+ (or potentially D-) pullup. The host will start
+ * enumerating this gadget when the pullup is active and a VBUS session
+ * is active (the link is powered). This pullup is always enabled unless
+ * usb_gadget_disconnect() has been used to disable it.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int usb_gadget_connect(struct usb_gadget *gadget)
+{
+ if (!gadget->ops->pullup)
+ return -EOPNOTSUPP;
+ return gadget->ops->pullup(gadget, 1);
+}
+
+/**
+ * usb_gadget_disconnect - software-controlled disconnect from USB host
+ * @gadget:the peripheral being disconnected
+ *
+ * Disables the D+ (or potentially D-) pullup, which the host may see
+ * as a disconnect (when a VBUS session is active). Not all systems
+ * support software pullup controls.
+ *
+ * This routine may be used during the gadget driver bind() call to prevent
+ * the peripheral from ever being visible to the USB host, unless later
+ * usb_gadget_connect() is called. For example, user mode components may
+ * need to be activated before the system can talk to hosts.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int usb_gadget_disconnect(struct usb_gadget *gadget)
+{
+ if (!gadget->ops->pullup)
+ return -EOPNOTSUPP;
+ return gadget->ops->pullup(gadget, 0);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/**
+ * struct usb_gadget_driver - driver for usb 'slave' devices
+ * @function: String describing the gadget's function
+ * @max_speed: Highest speed the driver handles.
+ * @setup: Invoked for ep0 control requests that aren't handled by
+ * the hardware level driver. Most calls must be handled by
+ * the gadget driver, including descriptor and configuration
+ * management. The 16 bit members of the setup data are in
+ * USB byte order. Called in_interrupt; this may not sleep. Driver
+ * queues a response to ep0, or returns negative to stall.
+ * @disconnect: Invoked after all transfers have been stopped,
+ * when the host is disconnected. May be called in_interrupt; this
+ * may not sleep. Some devices can't detect disconnect, so this might
+ * not be called except as part of controller shutdown.
+ * @bind: the driver's bind callback
+ * @unbind: Invoked when the driver is unbound from a gadget,
+ * usually from rmmod (after a disconnect is reported).
+ * Called in a context that permits sleeping.
+ * @suspend: Invoked on USB suspend. May be called in_interrupt.
+ * @resume: Invoked on USB resume. May be called in_interrupt.
+ * @reset: Invoked on USB bus reset. It is mandatory for all gadget drivers
+ * and should be called in_interrupt.
+ * @driver: Driver model state for this driver.
+ *
+ * Devices are disabled till a gadget driver successfully bind()s, which
+ * means the driver will handle setup() requests needed to enumerate (and
+ * meet "chapter 9" requirements) then do some useful work.
+ *
+ * If gadget->is_otg is true, the gadget driver must provide an OTG
+ * descriptor during enumeration, or else fail the bind() call. In such
+ * cases, no USB traffic may flow until both bind() returns without
+ * having called usb_gadget_disconnect(), and the USB host stack has
+ * initialized.
+ *
+ * Drivers use hardware-specific knowledge to configure the usb hardware.
+ * endpoint addressing is only one of several hardware characteristics that
+ * are in descriptors the ep0 implementation returns from setup() calls.
+ *
+ * Except for ep0 implementation, most driver code shouldn't need change to
+ * run on top of different usb controllers. It'll use endpoints set up by
+ * that ep0 implementation.
+ *
+ * The usb controller driver handles a few standard usb requests. Those
+ * include set_address, and feature flags for devices, interfaces, and
+ * endpoints (the get_status, set_feature, and clear_feature requests).
+ *
+ * Accordingly, the driver's setup() callback must always implement all
+ * get_descriptor requests, returning at least a device descriptor and
+ * a configuration descriptor. Drivers must make sure the endpoint
+ * descriptors match any hardware constraints. Some hardware also constrains
+ * other descriptors. (The pxa250 allows only configurations 1, 2, or 3).
+ *
+ * The driver's setup() callback must also implement set_configuration,
+ * and should also implement set_interface, get_configuration, and
+ * get_interface. Setting a configuration (or interface) is where
+ * endpoints should be activated or (config 0) shut down.
+ *
+ * (Note that only the default control endpoint is supported. Neither
+ * hosts nor devices generally support control traffic except to ep0.)
+ *
+ * Most devices will ignore USB suspend/resume operations, and so will
+ * not provide those callbacks. However, some may need to change modes
+ * when the host is not longer directing those activities. For example,
+ * local controls (buttons, dials, etc) may need to be re-enabled since
+ * the (remote) host can't do that any longer; or an error state might
+ * be cleared, to make the device behave identically whether or not
+ * power is maintained.
+ */
+struct usb_gadget_driver {
+ char *function;
+ enum usb_device_speed max_speed;
+ int (*bind)(struct usb_gadget *gadget,
+ struct usb_gadget_driver *driver);
+ void (*unbind)(struct usb_gadget *);
+ int (*setup)(struct usb_gadget *,
+ const struct usb_ctrlrequest *);
+ void (*disconnect)(struct usb_gadget *);
+ void (*suspend)(struct usb_gadget *);
+ void (*resume)(struct usb_gadget *);
+ void (*reset)(struct usb_gadget *);
+
+ /* FIXME support safe rmmod */
+ struct device_driver driver;
+};
+
+
+
+/*-------------------------------------------------------------------------*/
+
+/* driver modules register and unregister, as usual.
+ * these calls must be made in a context that can sleep.
+ *
+ * these will usually be implemented directly by the hardware-dependent
+ * usb bus interface driver, which will only support a single driver.
+ */
+
+/**
+ * usb_gadget_probe_driver - probe a gadget driver
+ * @driver: the driver being registered
+ * Context: can sleep
+ *
+ * Call this in your gadget driver's module initialization function,
+ * to tell the underlying usb controller driver about your driver.
+ * The @bind() function will be called to bind it to a gadget before this
+ * registration call returns. It's expected that the @bind() function will
+ * be in init sections.
+ */
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver);
+
+/**
+ * usb_gadget_unregister_driver - unregister a gadget driver
+ * @driver:the driver being unregistered
+ * Context: can sleep
+ *
+ * Call this in your gadget driver's module cleanup function,
+ * to tell the underlying usb controller that your driver is
+ * going away. If the controller is connected to a USB host,
+ * it will first disconnect(). The driver is also requested
+ * to unbind() and clean up any device state, before this procedure
+ * finally returns. It's expected that the unbind() functions
+ * will in in exit sections, so may not be linked in some kernels.
+ */
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver);
+
+extern int usb_add_gadget_udc_release(struct device *parent,
+ struct usb_gadget *gadget, void (*release)(struct device *dev));
+extern int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget);
+extern void usb_del_gadget_udc(struct usb_gadget *gadget);
+extern int usb_udc_attach_driver(const char *name,
+ struct usb_gadget_driver *driver);
+
+/*-------------------------------------------------------------------------*/
+
+/* utility to simplify dealing with string descriptors */
+
+/**
+ * struct usb_string - wraps a C string and its USB id
+ * @id:the (nonzero) ID for this string
+ * @s:the string, in UTF-8 encoding
+ *
+ * If you're using usb_gadget_get_string(), use this to wrap a string
+ * together with its ID.
+ */
+struct usb_string {
+ u8 id;
+ const char *s;
+};
+
+/**
+ * struct usb_gadget_strings - a set of USB strings in a given language
+ * @language:identifies the strings' language (0x0409 for en-us)
+ * @strings:array of strings with their ids
+ *
+ * If you're using usb_gadget_get_string(), use this to wrap all the
+ * strings for a given language.
+ */
+struct usb_gadget_strings {
+ u16 language; /* 0x0409 for en-us */
+ struct usb_string *strings;
+};
+
+struct usb_gadget_string_container {
+ struct list_head list;
+ u8 *stash[0];
+};
+
+/* put descriptor for string with that id into buf (buflen >= 256) */
+int usb_gadget_get_string(struct usb_gadget_strings *table, int id, u8 *buf);
+
+/*-------------------------------------------------------------------------*/
+
+/* utility to simplify managing config descriptors */
+
+/* write vector of descriptors into buffer */
+int usb_descriptor_fillbuf(void *, unsigned,
+ const struct usb_descriptor_header **);
+
+/* build config descriptor from single descriptor vector */
+int usb_gadget_config_buf(const struct usb_config_descriptor *config,
+ void *buf, unsigned buflen, const struct usb_descriptor_header **desc);
+
+/* copy a NULL-terminated vector of descriptors */
+struct usb_descriptor_header **usb_copy_descriptors(
+ struct usb_descriptor_header **);
+
+/**
+ * usb_free_descriptors - free descriptors returned by usb_copy_descriptors()
+ * @v: vector of descriptors
+ */
+static inline void usb_free_descriptors(struct usb_descriptor_header **v)
+{
+ kfree(v);
+}
+
+struct usb_function;
+int usb_assign_descriptors(struct usb_function *f,
+ struct usb_descriptor_header **fs,
+ struct usb_descriptor_header **hs,
+ struct usb_descriptor_header **ss);
+void usb_free_all_descriptors(struct usb_function *f);
+
+/*-------------------------------------------------------------------------*/
+
+/* utility to simplify map/unmap of usb_requests to/from DMA */
+
+extern int usb_gadget_map_request(struct usb_gadget *gadget,
+ struct usb_request *req, int is_in);
+
+extern void usb_gadget_unmap_request(struct usb_gadget *gadget,
+ struct usb_request *req, int is_in);
+
+/*-------------------------------------------------------------------------*/
+
+/* utility to set gadget state properly */
+
+extern void usb_gadget_set_state(struct usb_gadget *gadget,
+ enum usb_device_state state);
+
+/*-------------------------------------------------------------------------*/
+
+/* utility to tell udc core that the bus reset occurs */
+extern void usb_gadget_udc_reset(struct usb_gadget *gadget,
+ struct usb_gadget_driver *driver);
+
+/*-------------------------------------------------------------------------*/
+
+/* utility to give requests back to the gadget layer */
+
+extern void usb_gadget_giveback_request(struct usb_ep *ep,
+ struct usb_request *req);
+
+/*-------------------------------------------------------------------------*/
+
+/* utility to update vbus status for udc core, it may be scheduled */
+extern void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status);
+
+/*-------------------------------------------------------------------------*/
+
+/* utility wrapping a simple endpoint selection policy */
+
+extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *,
+ struct usb_endpoint_descriptor *);
+
+
+extern struct usb_ep *usb_ep_autoconfig_ss(struct usb_gadget *,
+ struct usb_endpoint_descriptor *,
+ struct usb_ss_ep_comp_descriptor *);
+
+extern void usb_ep_autoconfig_reset(struct usb_gadget *);
+
+#endif /* __LINUX_USB_GADGET_H */
diff --git a/kernel/include/linux/usb/gadget_configfs.h b/kernel/include/linux/usb/gadget_configfs.h
new file mode 100644
index 000000000..d74c0ae98
--- /dev/null
+++ b/kernel/include/linux/usb/gadget_configfs.h
@@ -0,0 +1,110 @@
+#ifndef __GADGET_CONFIGFS__
+#define __GADGET_CONFIGFS__
+
+#include <linux/configfs.h>
+
+int check_user_usb_string(const char *name,
+ struct usb_gadget_strings *stringtab_dev);
+
+#define GS_STRINGS_W(__struct, __name) \
+ static ssize_t __struct##_##__name##_store(struct __struct *gs, \
+ const char *page, size_t len) \
+{ \
+ int ret; \
+ \
+ ret = usb_string_copy(page, &gs->__name); \
+ if (ret) \
+ return ret; \
+ return len; \
+}
+
+#define GS_STRINGS_R(__struct, __name) \
+ static ssize_t __struct##_##__name##_show(struct __struct *gs, \
+ char *page) \
+{ \
+ return sprintf(page, "%s\n", gs->__name ?: ""); \
+}
+
+#define GS_STRING_ITEM_ATTR(struct_name, name) \
+ static struct struct_name##_attribute struct_name##_##name = \
+ __CONFIGFS_ATTR(name, S_IRUGO | S_IWUSR, \
+ struct_name##_##name##_show, \
+ struct_name##_##name##_store)
+
+#define GS_STRINGS_RW(struct_name, _name) \
+ GS_STRINGS_R(struct_name, _name) \
+ GS_STRINGS_W(struct_name, _name) \
+ GS_STRING_ITEM_ATTR(struct_name, _name)
+
+#define USB_CONFIG_STRING_RW_OPS(struct_in) \
+ CONFIGFS_ATTR_OPS(struct_in); \
+ \
+static struct configfs_item_operations struct_in##_langid_item_ops = { \
+ .release = struct_in##_attr_release, \
+ .show_attribute = struct_in##_attr_show, \
+ .store_attribute = struct_in##_attr_store, \
+}; \
+ \
+static struct config_item_type struct_in##_langid_type = { \
+ .ct_item_ops = &struct_in##_langid_item_ops, \
+ .ct_attrs = struct_in##_langid_attrs, \
+ .ct_owner = THIS_MODULE, \
+}
+
+#define USB_CONFIG_STRINGS_LANG(struct_in, struct_member) \
+ static struct config_group *struct_in##_strings_make( \
+ struct config_group *group, \
+ const char *name) \
+ { \
+ struct struct_member *gi; \
+ struct struct_in *gs; \
+ struct struct_in *new; \
+ int langs = 0; \
+ int ret; \
+ \
+ new = kzalloc(sizeof(*new), GFP_KERNEL); \
+ if (!new) \
+ return ERR_PTR(-ENOMEM); \
+ \
+ ret = check_user_usb_string(name, &new->stringtab_dev); \
+ if (ret) \
+ goto err; \
+ config_group_init_type_name(&new->group, name, \
+ &struct_in##_langid_type); \
+ \
+ gi = container_of(group, struct struct_member, strings_group); \
+ ret = -EEXIST; \
+ list_for_each_entry(gs, &gi->string_list, list) { \
+ if (gs->stringtab_dev.language == new->stringtab_dev.language) \
+ goto err; \
+ langs++; \
+ } \
+ ret = -EOVERFLOW; \
+ if (langs >= MAX_USB_STRING_LANGS) \
+ goto err; \
+ \
+ list_add_tail(&new->list, &gi->string_list); \
+ return &new->group; \
+err: \
+ kfree(new); \
+ return ERR_PTR(ret); \
+} \
+ \
+static void struct_in##_strings_drop( \
+ struct config_group *group, \
+ struct config_item *item) \
+{ \
+ config_item_put(item); \
+} \
+ \
+static struct configfs_group_operations struct_in##_strings_ops = { \
+ .make_group = &struct_in##_strings_make, \
+ .drop_item = &struct_in##_strings_drop, \
+}; \
+ \
+static struct config_item_type struct_in##_strings_type = { \
+ .ct_group_ops = &struct_in##_strings_ops, \
+ .ct_owner = THIS_MODULE, \
+}
+
+#endif
diff --git a/kernel/include/linux/usb/gpio_vbus.h b/kernel/include/linux/usb/gpio_vbus.h
new file mode 100644
index 000000000..837bba604
--- /dev/null
+++ b/kernel/include/linux/usb/gpio_vbus.h
@@ -0,0 +1,32 @@
+/*
+ * A simple GPIO VBUS sensing driver for B peripheral only devices
+ * with internal transceivers.
+ * Optionally D+ pullup can be controlled by a second GPIO.
+ *
+ * Copyright (c) 2008 Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/**
+ * struct gpio_vbus_mach_info - configuration for gpio_vbus
+ * @gpio_vbus: VBUS sensing GPIO
+ * @gpio_pullup: optional D+ or D- pullup GPIO (else negative/invalid)
+ * @gpio_vbus_inverted: true if gpio_vbus is active low
+ * @gpio_pullup_inverted: true if gpio_pullup is active low
+ * @wakeup: configure gpio_vbus as a wake-up source
+ *
+ * The VBUS sensing GPIO should have a pulldown, which will normally be
+ * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a
+ * value the GPIO detects as active. Some systems will use comparators.
+ */
+struct gpio_vbus_mach_info {
+ int gpio_vbus;
+ int gpio_pullup;
+ bool gpio_vbus_inverted;
+ bool gpio_pullup_inverted;
+ bool wakeup;
+};
diff --git a/kernel/include/linux/usb/hcd.h b/kernel/include/linux/usb/hcd.h
new file mode 100644
index 000000000..68b1e836d
--- /dev/null
+++ b/kernel/include/linux/usb/hcd.h
@@ -0,0 +1,709 @@
+/*
+ * Copyright (c) 2001-2002 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __USB_CORE_HCD_H
+#define __USB_CORE_HCD_H
+
+#ifdef __KERNEL__
+
+#include <linux/rwsem.h>
+#include <linux/interrupt.h>
+
+#define MAX_TOPO_LEVEL 6
+
+/* This file contains declarations of usbcore internals that are mostly
+ * used or exposed by Host Controller Drivers.
+ */
+
+/*
+ * USB Packet IDs (PIDs)
+ */
+#define USB_PID_EXT 0xf0 /* USB 2.0 LPM ECN */
+#define USB_PID_OUT 0xe1
+#define USB_PID_ACK 0xd2
+#define USB_PID_DATA0 0xc3
+#define USB_PID_PING 0xb4 /* USB 2.0 */
+#define USB_PID_SOF 0xa5
+#define USB_PID_NYET 0x96 /* USB 2.0 */
+#define USB_PID_DATA2 0x87 /* USB 2.0 */
+#define USB_PID_SPLIT 0x78 /* USB 2.0 */
+#define USB_PID_IN 0x69
+#define USB_PID_NAK 0x5a
+#define USB_PID_DATA1 0x4b
+#define USB_PID_PREAMBLE 0x3c /* Token mode */
+#define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */
+#define USB_PID_SETUP 0x2d
+#define USB_PID_STALL 0x1e
+#define USB_PID_MDATA 0x0f /* USB 2.0 */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * USB Host Controller Driver (usb_hcd) framework
+ *
+ * Since "struct usb_bus" is so thin, you can't share much code in it.
+ * This framework is a layer over that, and should be more sharable.
+ *
+ * @authorized_default: Specifies if new devices are authorized to
+ * connect by default or they require explicit
+ * user space authorization; this bit is settable
+ * through /sys/class/usb_host/X/authorized_default.
+ * For the rest is RO, so we don't lock to r/w it.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+struct giveback_urb_bh {
+ bool running;
+ spinlock_t lock;
+ struct list_head head;
+ struct tasklet_struct bh;
+ struct usb_host_endpoint *completing_ep;
+};
+
+struct usb_hcd {
+
+ /*
+ * housekeeping
+ */
+ struct usb_bus self; /* hcd is-a bus */
+ struct kref kref; /* reference counter */
+
+ const char *product_desc; /* product/vendor string */
+ int speed; /* Speed for this roothub.
+ * May be different from
+ * hcd->driver->flags & HCD_MASK
+ */
+ char irq_descr[24]; /* driver + bus # */
+
+ struct timer_list rh_timer; /* drives root-hub polling */
+ struct urb *status_urb; /* the current status urb */
+#ifdef CONFIG_PM
+ struct work_struct wakeup_work; /* for remote wakeup */
+#endif
+
+ /*
+ * hardware info/state
+ */
+ const struct hc_driver *driver; /* hw-specific hooks */
+
+ /*
+ * OTG and some Host controllers need software interaction with phys;
+ * other external phys should be software-transparent
+ */
+ struct usb_phy *usb_phy;
+ struct phy *phy;
+
+ /* Flags that need to be manipulated atomically because they can
+ * change while the host controller is running. Always use
+ * set_bit() or clear_bit() to change their values.
+ */
+ unsigned long flags;
+#define HCD_FLAG_HW_ACCESSIBLE 0 /* at full power */
+#define HCD_FLAG_POLL_RH 2 /* poll for rh status? */
+#define HCD_FLAG_POLL_PENDING 3 /* status has changed? */
+#define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */
+#define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */
+#define HCD_FLAG_DEAD 6 /* controller has died? */
+
+ /* The flags can be tested using these macros; they are likely to
+ * be slightly faster than test_bit().
+ */
+#define HCD_HW_ACCESSIBLE(hcd) ((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE))
+#define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
+#define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
+#define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
+#define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
+#define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD))
+
+ /* Flags that get set only during HCD registration or removal. */
+ unsigned rh_registered:1;/* is root hub registered? */
+ unsigned rh_pollable:1; /* may we poll the root hub? */
+ unsigned msix_enabled:1; /* driver has MSI-X enabled? */
+ unsigned remove_phy:1; /* auto-remove USB phy */
+
+ /* The next flag is a stopgap, to be removed when all the HCDs
+ * support the new root-hub polling mechanism. */
+ unsigned uses_new_polling:1;
+ unsigned wireless:1; /* Wireless USB HCD */
+ unsigned authorized_default:1;
+ unsigned has_tt:1; /* Integrated TT in root hub */
+ unsigned amd_resume_bug:1; /* AMD remote wakeup quirk */
+ unsigned can_do_streams:1; /* HC supports streams */
+ unsigned tpl_support:1; /* OTG & EH TPL support */
+ unsigned cant_recv_wakeups:1;
+ /* wakeup requests from downstream aren't received */
+
+ unsigned int irq; /* irq allocated */
+ void __iomem *regs; /* device memory/io */
+ resource_size_t rsrc_start; /* memory/io resource start */
+ resource_size_t rsrc_len; /* memory/io resource length */
+ unsigned power_budget; /* in mA, 0 = no limit */
+
+ struct giveback_urb_bh high_prio_bh;
+ struct giveback_urb_bh low_prio_bh;
+
+ /* bandwidth_mutex should be taken before adding or removing
+ * any new bus bandwidth constraints:
+ * 1. Before adding a configuration for a new device.
+ * 2. Before removing the configuration to put the device into
+ * the addressed state.
+ * 3. Before selecting a different configuration.
+ * 4. Before selecting an alternate interface setting.
+ *
+ * bandwidth_mutex should be dropped after a successful control message
+ * to the device, or resetting the bandwidth after a failed attempt.
+ */
+ struct mutex *bandwidth_mutex;
+ struct usb_hcd *shared_hcd;
+ struct usb_hcd *primary_hcd;
+
+
+#define HCD_BUFFER_POOLS 4
+ struct dma_pool *pool[HCD_BUFFER_POOLS];
+
+ int state;
+# define __ACTIVE 0x01
+# define __SUSPEND 0x04
+# define __TRANSIENT 0x80
+
+# define HC_STATE_HALT 0
+# define HC_STATE_RUNNING (__ACTIVE)
+# define HC_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE)
+# define HC_STATE_RESUMING (__SUSPEND|__TRANSIENT)
+# define HC_STATE_SUSPENDED (__SUSPEND)
+
+#define HC_IS_RUNNING(state) ((state) & __ACTIVE)
+#define HC_IS_SUSPENDED(state) ((state) & __SUSPEND)
+
+ /* more shared queuing code would be good; it should support
+ * smarter scheduling, handle transaction translators, etc;
+ * input size of periodic table to an interrupt scheduler.
+ * (ohci 32, uhci 1024, ehci 256/512/1024).
+ */
+
+ /* The HC driver's private data is stored at the end of
+ * this structure.
+ */
+ unsigned long hcd_priv[0]
+ __attribute__ ((aligned(sizeof(s64))));
+};
+
+/* 2.4 does this a bit differently ... */
+static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd)
+{
+ return &hcd->self;
+}
+
+static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus)
+{
+ return container_of(bus, struct usb_hcd, self);
+}
+
+struct hcd_timeout { /* timeouts we allocate */
+ struct list_head timeout_list;
+ struct timer_list timer;
+};
+
+/*-------------------------------------------------------------------------*/
+
+
+struct hc_driver {
+ const char *description; /* "ehci-hcd" etc */
+ const char *product_desc; /* product/vendor string */
+ size_t hcd_priv_size; /* size of private data */
+
+ /* irq handler */
+ irqreturn_t (*irq) (struct usb_hcd *hcd);
+
+ int flags;
+#define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */
+#define HCD_LOCAL_MEM 0x0002 /* HC needs local memory */
+#define HCD_SHARED 0x0004 /* Two (or more) usb_hcds share HW */
+#define HCD_USB11 0x0010 /* USB 1.1 */
+#define HCD_USB2 0x0020 /* USB 2.0 */
+#define HCD_USB25 0x0030 /* Wireless USB 1.0 (USB 2.5)*/
+#define HCD_USB3 0x0040 /* USB 3.0 */
+#define HCD_MASK 0x0070
+#define HCD_BH 0x0100 /* URB complete in BH context */
+
+ /* called to init HCD and root hub */
+ int (*reset) (struct usb_hcd *hcd);
+ int (*start) (struct usb_hcd *hcd);
+
+ /* NOTE: these suspend/resume calls relate to the HC as
+ * a whole, not just the root hub; they're for PCI bus glue.
+ */
+ /* called after suspending the hub, before entering D3 etc */
+ int (*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup);
+
+ /* called after entering D0 (etc), before resuming the hub */
+ int (*pci_resume)(struct usb_hcd *hcd, bool hibernated);
+
+ /* cleanly make HCD stop writing memory and doing I/O */
+ void (*stop) (struct usb_hcd *hcd);
+
+ /* shutdown HCD */
+ void (*shutdown) (struct usb_hcd *hcd);
+
+ /* return current frame number */
+ int (*get_frame_number) (struct usb_hcd *hcd);
+
+ /* manage i/o requests, device state */
+ int (*urb_enqueue)(struct usb_hcd *hcd,
+ struct urb *urb, gfp_t mem_flags);
+ int (*urb_dequeue)(struct usb_hcd *hcd,
+ struct urb *urb, int status);
+
+ /*
+ * (optional) these hooks allow an HCD to override the default DMA
+ * mapping and unmapping routines. In general, they shouldn't be
+ * necessary unless the host controller has special DMA requirements,
+ * such as alignment contraints. If these are not specified, the
+ * general usb_hcd_(un)?map_urb_for_dma functions will be used instead
+ * (and it may be a good idea to call these functions in your HCD
+ * implementation)
+ */
+ int (*map_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags);
+ void (*unmap_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb);
+
+ /* hw synch, freeing endpoint resources that urb_dequeue can't */
+ void (*endpoint_disable)(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep);
+
+ /* (optional) reset any endpoint state such as sequence number
+ and current window */
+ void (*endpoint_reset)(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep);
+
+ /* root hub support */
+ int (*hub_status_data) (struct usb_hcd *hcd, char *buf);
+ int (*hub_control) (struct usb_hcd *hcd,
+ u16 typeReq, u16 wValue, u16 wIndex,
+ char *buf, u16 wLength);
+ int (*bus_suspend)(struct usb_hcd *);
+ int (*bus_resume)(struct usb_hcd *);
+ int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
+
+ /* force handover of high-speed port to full-speed companion */
+ void (*relinquish_port)(struct usb_hcd *, int);
+ /* has a port been handed over to a companion? */
+ int (*port_handed_over)(struct usb_hcd *, int);
+
+ /* CLEAR_TT_BUFFER completion callback */
+ void (*clear_tt_buffer_complete)(struct usb_hcd *,
+ struct usb_host_endpoint *);
+
+ /* xHCI specific functions */
+ /* Called by usb_alloc_dev to alloc HC device structures */
+ int (*alloc_dev)(struct usb_hcd *, struct usb_device *);
+ /* Called by usb_disconnect to free HC device structures */
+ void (*free_dev)(struct usb_hcd *, struct usb_device *);
+ /* Change a group of bulk endpoints to support multiple stream IDs */
+ int (*alloc_streams)(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ unsigned int num_streams, gfp_t mem_flags);
+ /* Reverts a group of bulk endpoints back to not using stream IDs.
+ * Can fail if we run out of memory.
+ */
+ int (*free_streams)(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ gfp_t mem_flags);
+
+ /* Bandwidth computation functions */
+ /* Note that add_endpoint() can only be called once per endpoint before
+ * check_bandwidth() or reset_bandwidth() must be called.
+ * drop_endpoint() can only be called once per endpoint also.
+ * A call to xhci_drop_endpoint() followed by a call to
+ * xhci_add_endpoint() will add the endpoint to the schedule with
+ * possibly new parameters denoted by a different endpoint descriptor
+ * in usb_host_endpoint. A call to xhci_add_endpoint() followed by a
+ * call to xhci_drop_endpoint() is not allowed.
+ */
+ /* Allocate endpoint resources and add them to a new schedule */
+ int (*add_endpoint)(struct usb_hcd *, struct usb_device *,
+ struct usb_host_endpoint *);
+ /* Drop an endpoint from a new schedule */
+ int (*drop_endpoint)(struct usb_hcd *, struct usb_device *,
+ struct usb_host_endpoint *);
+ /* Check that a new hardware configuration, set using
+ * endpoint_enable and endpoint_disable, does not exceed bus
+ * bandwidth. This must be called before any set configuration
+ * or set interface requests are sent to the device.
+ */
+ int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
+ /* Reset the device schedule to the last known good schedule,
+ * which was set from a previous successful call to
+ * check_bandwidth(). This reverts any add_endpoint() and
+ * drop_endpoint() calls since that last successful call.
+ * Used for when a check_bandwidth() call fails due to resource
+ * or bandwidth constraints.
+ */
+ void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
+ /* Returns the hardware-chosen device address */
+ int (*address_device)(struct usb_hcd *, struct usb_device *udev);
+ /* prepares the hardware to send commands to the device */
+ int (*enable_device)(struct usb_hcd *, struct usb_device *udev);
+ /* Notifies the HCD after a hub descriptor is fetched.
+ * Will block.
+ */
+ int (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev,
+ struct usb_tt *tt, gfp_t mem_flags);
+ int (*reset_device)(struct usb_hcd *, struct usb_device *);
+ /* Notifies the HCD after a device is connected and its
+ * address is set
+ */
+ int (*update_device)(struct usb_hcd *, struct usb_device *);
+ int (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int);
+ /* USB 3.0 Link Power Management */
+ /* Returns the USB3 hub-encoded value for the U1/U2 timeout. */
+ int (*enable_usb3_lpm_timeout)(struct usb_hcd *,
+ struct usb_device *, enum usb3_link_state state);
+ /* The xHCI host controller can still fail the command to
+ * disable the LPM timeouts, so this can return an error code.
+ */
+ int (*disable_usb3_lpm_timeout)(struct usb_hcd *,
+ struct usb_device *, enum usb3_link_state state);
+ int (*find_raw_port_number)(struct usb_hcd *, int);
+ /* Call for power on/off the port if necessary */
+ int (*port_power)(struct usb_hcd *hcd, int portnum, bool enable);
+
+};
+
+static inline int hcd_giveback_urb_in_bh(struct usb_hcd *hcd)
+{
+ return hcd->driver->flags & HCD_BH;
+}
+
+static inline bool hcd_periodic_completion_in_progress(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
+{
+ return hcd->high_prio_bh.completing_ep == ep;
+}
+
+extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
+extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
+ int status);
+extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb);
+
+extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags);
+extern int usb_hcd_unlink_urb(struct urb *urb, int status);
+extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
+ int status);
+extern int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags);
+extern void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *);
+extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *);
+extern void usb_hcd_flush_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep);
+extern void usb_hcd_disable_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep);
+extern void usb_hcd_reset_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep);
+extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
+extern int usb_hcd_alloc_bandwidth(struct usb_device *udev,
+ struct usb_host_config *new_config,
+ struct usb_host_interface *old_alt,
+ struct usb_host_interface *new_alt);
+extern int usb_hcd_get_frame_number(struct usb_device *udev);
+
+extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
+ struct device *dev, const char *bus_name);
+extern struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
+ struct device *dev, const char *bus_name,
+ struct usb_hcd *shared_hcd);
+extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd);
+extern void usb_put_hcd(struct usb_hcd *hcd);
+extern int usb_hcd_is_primary_hcd(struct usb_hcd *hcd);
+extern int usb_add_hcd(struct usb_hcd *hcd,
+ unsigned int irqnum, unsigned long irqflags);
+extern void usb_remove_hcd(struct usb_hcd *hcd);
+extern int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1);
+
+struct platform_device;
+extern void usb_hcd_platform_shutdown(struct platform_device *dev);
+
+#ifdef CONFIG_PCI
+struct pci_dev;
+struct pci_device_id;
+extern int usb_hcd_pci_probe(struct pci_dev *dev,
+ const struct pci_device_id *id);
+extern void usb_hcd_pci_remove(struct pci_dev *dev);
+extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
+
+extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
+
+#ifdef CONFIG_PM
+extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
+#endif
+#endif /* CONFIG_PCI */
+
+/* pci-ish (pdev null is ok) buffer alloc/mapping support */
+void usb_init_pool_max(void);
+int hcd_buffer_create(struct usb_hcd *hcd);
+void hcd_buffer_destroy(struct usb_hcd *hcd);
+
+void *hcd_buffer_alloc(struct usb_bus *bus, size_t size,
+ gfp_t mem_flags, dma_addr_t *dma);
+void hcd_buffer_free(struct usb_bus *bus, size_t size,
+ void *addr, dma_addr_t dma);
+
+/* generic bus glue, needed for host controllers that don't use PCI */
+extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
+
+extern void usb_hc_died(struct usb_hcd *hcd);
+extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
+extern void usb_wakeup_notification(struct usb_device *hdev,
+ unsigned int portnum);
+
+extern void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum);
+extern void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum);
+
+/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
+#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
+#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
+#define usb_settoggle(dev, ep, out, bit) \
+ ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
+ ((bit) << (ep)))
+
+/* -------------------------------------------------------------------------- */
+
+/* Enumeration is only for the hub driver, or HCD virtual root hubs */
+extern struct usb_device *usb_alloc_dev(struct usb_device *parent,
+ struct usb_bus *, unsigned port);
+extern int usb_new_device(struct usb_device *dev);
+extern void usb_disconnect(struct usb_device **);
+
+extern int usb_get_configuration(struct usb_device *dev);
+extern void usb_destroy_configuration(struct usb_device *dev);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * HCD Root Hub support
+ */
+
+#include <linux/usb/ch11.h>
+
+/*
+ * As of USB 2.0, full/low speed devices are segregated into trees.
+ * One type grows from USB 1.1 host controllers (OHCI, UHCI etc).
+ * The other type grows from high speed hubs when they connect to
+ * full/low speed devices using "Transaction Translators" (TTs).
+ *
+ * TTs should only be known to the hub driver, and high speed bus
+ * drivers (only EHCI for now). They affect periodic scheduling and
+ * sometimes control/bulk error recovery.
+ */
+
+struct usb_device;
+
+struct usb_tt {
+ struct usb_device *hub; /* upstream highspeed hub */
+ int multi; /* true means one TT per port */
+ unsigned think_time; /* think time in ns */
+ void *hcpriv; /* HCD private data */
+
+ /* for control/bulk error recovery (CLEAR_TT_BUFFER) */
+ spinlock_t lock;
+ struct list_head clear_list; /* of usb_tt_clear */
+ struct work_struct clear_work;
+};
+
+struct usb_tt_clear {
+ struct list_head clear_list;
+ unsigned tt;
+ u16 devinfo;
+ struct usb_hcd *hcd;
+ struct usb_host_endpoint *ep;
+};
+
+extern int usb_hub_clear_tt_buffer(struct urb *urb);
+extern void usb_ep0_reinit(struct usb_device *);
+
+/* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
+#define DeviceRequest \
+ ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
+#define DeviceOutRequest \
+ ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
+
+#define InterfaceRequest \
+ ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
+
+#define EndpointRequest \
+ ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
+#define EndpointOutRequest \
+ ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
+
+/* class requests from the USB 2.0 hub spec, table 11-15 */
+/* GetBusState and SetHubDescriptor are optional, omitted */
+#define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE)
+#define ClearPortFeature (0x2300 | USB_REQ_CLEAR_FEATURE)
+#define GetHubDescriptor (0xa000 | USB_REQ_GET_DESCRIPTOR)
+#define GetHubStatus (0xa000 | USB_REQ_GET_STATUS)
+#define GetPortStatus (0xa300 | USB_REQ_GET_STATUS)
+#define SetHubFeature (0x2000 | USB_REQ_SET_FEATURE)
+#define SetPortFeature (0x2300 | USB_REQ_SET_FEATURE)
+
+
+/*-------------------------------------------------------------------------*/
+
+/* class requests from USB 3.0 hub spec, table 10-5 */
+#define SetHubDepth (0x3000 | HUB_SET_DEPTH)
+#define GetPortErrorCount (0x8000 | HUB_GET_PORT_ERR_COUNT)
+
+/*
+ * Generic bandwidth allocation constants/support
+ */
+#define FRAME_TIME_USECS 1000L
+#define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */
+ /* Trying not to use worst-case bit-stuffing
+ * of (7/6 * 8 * bytecount) = 9.33 * bytecount */
+ /* bytecount = data payload byte count */
+
+#define NS_TO_US(ns) DIV_ROUND_UP(ns, 1000L)
+ /* convert nanoseconds to microseconds, rounding up */
+
+/*
+ * Full/low speed bandwidth allocation constants/support.
+ */
+#define BW_HOST_DELAY 1000L /* nanoseconds */
+#define BW_HUB_LS_SETUP 333L /* nanoseconds */
+ /* 4 full-speed bit times (est.) */
+
+#define FRAME_TIME_BITS 12000L /* frame = 1 millisecond */
+#define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L)
+#define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L)
+
+/*
+ * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
+ * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
+ * to preallocate bandwidth)
+ */
+#define USB2_HOST_DELAY 5 /* nsec, guess */
+#define HS_NSECS(bytes) (((55 * 8 * 2083) \
+ + (2083UL * (3 + BitTime(bytes))))/1000 \
+ + USB2_HOST_DELAY)
+#define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \
+ + (2083UL * (3 + BitTime(bytes))))/1000 \
+ + USB2_HOST_DELAY)
+#define HS_USECS(bytes) NS_TO_US(HS_NSECS(bytes))
+#define HS_USECS_ISO(bytes) NS_TO_US(HS_NSECS_ISO(bytes))
+
+extern long usb_calc_bus_time(int speed, int is_input,
+ int isoc, int bytecount);
+
+/*-------------------------------------------------------------------------*/
+
+extern void usb_set_device_state(struct usb_device *udev,
+ enum usb_device_state new_state);
+
+/*-------------------------------------------------------------------------*/
+
+/* exported only within usbcore */
+
+extern struct list_head usb_bus_list;
+extern struct mutex usb_bus_list_lock;
+extern wait_queue_head_t usb_kill_urb_queue;
+
+extern int usb_find_interface_driver(struct usb_device *dev,
+ struct usb_interface *interface);
+
+#define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN))
+
+#ifdef CONFIG_PM
+extern void usb_root_hub_lost_power(struct usb_device *rhdev);
+extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg);
+extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg);
+extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd);
+#else
+static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
+{
+ return;
+}
+#endif /* CONFIG_PM */
+
+/*-------------------------------------------------------------------------*/
+
+#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
+
+struct usb_mon_operations {
+ void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
+ void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
+ void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status);
+ /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
+};
+
+extern struct usb_mon_operations *mon_ops;
+
+static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb)
+{
+ if (bus->monitored)
+ (*mon_ops->urb_submit)(bus, urb);
+}
+
+static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
+ int error)
+{
+ if (bus->monitored)
+ (*mon_ops->urb_submit_error)(bus, urb, error);
+}
+
+static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
+ int status)
+{
+ if (bus->monitored)
+ (*mon_ops->urb_complete)(bus, urb, status);
+}
+
+int usb_mon_register(struct usb_mon_operations *ops);
+void usb_mon_deregister(void);
+
+#else
+
+static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
+static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
+ int error) {}
+static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
+ int status) {}
+
+#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
+
+/*-------------------------------------------------------------------------*/
+
+/* random stuff */
+
+#define RUN_CONTEXT (in_irq() ? "in_irq" \
+ : (in_interrupt() ? "in_interrupt" : "can sleep"))
+
+
+/* This rwsem is for use only by the hub driver and ehci-hcd.
+ * Nobody else should touch it.
+ */
+extern struct rw_semaphore ehci_cf_port_reset_rwsem;
+
+/* Keep track of which host controller drivers are loaded */
+#define USB_UHCI_LOADED 0
+#define USB_OHCI_LOADED 1
+#define USB_EHCI_LOADED 2
+extern unsigned long usb_hcds_loaded;
+
+#endif /* __KERNEL__ */
+
+#endif /* __USB_CORE_HCD_H */
diff --git a/kernel/include/linux/usb/input.h b/kernel/include/linux/usb/input.h
new file mode 100644
index 000000000..0e010b220
--- /dev/null
+++ b/kernel/include/linux/usb/input.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2005 Dmitry Torokhov
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef __LINUX_USB_INPUT_H
+#define __LINUX_USB_INPUT_H
+
+#include <linux/usb.h>
+#include <linux/input.h>
+#include <asm/byteorder.h>
+
+static inline void
+usb_to_input_id(const struct usb_device *dev, struct input_id *id)
+{
+ id->bustype = BUS_USB;
+ id->vendor = le16_to_cpu(dev->descriptor.idVendor);
+ id->product = le16_to_cpu(dev->descriptor.idProduct);
+ id->version = le16_to_cpu(dev->descriptor.bcdDevice);
+}
+
+#endif /* __LINUX_USB_INPUT_H */
diff --git a/kernel/include/linux/usb/iowarrior.h b/kernel/include/linux/usb/iowarrior.h
new file mode 100644
index 000000000..4fd6513d5
--- /dev/null
+++ b/kernel/include/linux/usb/iowarrior.h
@@ -0,0 +1,42 @@
+#ifndef __LINUX_USB_IOWARRIOR_H
+#define __LINUX_USB_IOWARRIOR_H
+
+#define CODEMERCS_MAGIC_NUMBER 0xC0 /* like COde Mercenaries */
+
+/* Define the ioctl commands for reading and writing data */
+#define IOW_WRITE _IOW(CODEMERCS_MAGIC_NUMBER, 1, __u8 *)
+#define IOW_READ _IOW(CODEMERCS_MAGIC_NUMBER, 2, __u8 *)
+
+/*
+ A struct for available device info which is read
+ with the ioctl IOW_GETINFO.
+ To be compatible with 2.4 userspace which didn't have an easy way to get
+ this information.
+*/
+struct iowarrior_info {
+ /* vendor id : supposed to be USB_VENDOR_ID_CODEMERCS in all cases */
+ __u32 vendor;
+ /* product id : depends on type of chip (USB_DEVICE_ID_CODEMERCS_X) */
+ __u32 product;
+ /* the serial number of our chip (if a serial-number is not available
+ * this is empty string) */
+ __u8 serial[9];
+ /* revision number of the chip */
+ __u32 revision;
+ /* USB-speed of the device (0=UNKNOWN, 1=LOW, 2=FULL 3=HIGH) */
+ __u32 speed;
+ /* power consumption of the device in mA */
+ __u32 power;
+ /* the number of the endpoint */
+ __u32 if_num;
+ /* size of the data-packets on this interface */
+ __u32 report_size;
+};
+
+/*
+ Get some device-information (product-id , serial-number etc.)
+ in order to identify a chip.
+*/
+#define IOW_GETINFO _IOR(CODEMERCS_MAGIC_NUMBER, 3, struct iowarrior_info)
+
+#endif /* __LINUX_USB_IOWARRIOR_H */
diff --git a/kernel/include/linux/usb/irda.h b/kernel/include/linux/usb/irda.h
new file mode 100644
index 000000000..e345ceaf7
--- /dev/null
+++ b/kernel/include/linux/usb/irda.h
@@ -0,0 +1,151 @@
+/*
+ * USB IrDA Bridge Device Definition
+ */
+
+#ifndef __LINUX_USB_IRDA_H
+#define __LINUX_USB_IRDA_H
+
+/* This device should use Application-specific class */
+
+#define USB_SUBCLASS_IRDA 0x02
+
+/*-------------------------------------------------------------------------*/
+
+/* Class-Specific requests (bRequest field) */
+
+#define USB_REQ_CS_IRDA_RECEIVING 1
+#define USB_REQ_CS_IRDA_CHECK_MEDIA_BUSY 3
+#define USB_REQ_CS_IRDA_RATE_SNIFF 4
+#define USB_REQ_CS_IRDA_UNICAST_LIST 5
+#define USB_REQ_CS_IRDA_GET_CLASS_DESC 6
+
+/*-------------------------------------------------------------------------*/
+
+/* Class-Specific descriptor */
+
+#define USB_DT_CS_IRDA 0x21
+
+/*-------------------------------------------------------------------------*/
+
+/* Data sizes */
+
+#define USB_IRDA_DS_2048 (1 << 5)
+#define USB_IRDA_DS_1024 (1 << 4)
+#define USB_IRDA_DS_512 (1 << 3)
+#define USB_IRDA_DS_256 (1 << 2)
+#define USB_IRDA_DS_128 (1 << 1)
+#define USB_IRDA_DS_64 (1 << 0)
+
+/* Window sizes */
+
+#define USB_IRDA_WS_7 (1 << 6)
+#define USB_IRDA_WS_6 (1 << 5)
+#define USB_IRDA_WS_5 (1 << 4)
+#define USB_IRDA_WS_4 (1 << 3)
+#define USB_IRDA_WS_3 (1 << 2)
+#define USB_IRDA_WS_2 (1 << 1)
+#define USB_IRDA_WS_1 (1 << 0)
+
+/* Min turnaround times in usecs */
+
+#define USB_IRDA_MTT_0 (1 << 7)
+#define USB_IRDA_MTT_10 (1 << 6)
+#define USB_IRDA_MTT_50 (1 << 5)
+#define USB_IRDA_MTT_100 (1 << 4)
+#define USB_IRDA_MTT_500 (1 << 3)
+#define USB_IRDA_MTT_1000 (1 << 2)
+#define USB_IRDA_MTT_5000 (1 << 1)
+#define USB_IRDA_MTT_10000 (1 << 0)
+
+/* Baud rates */
+
+#define USB_IRDA_BR_4000000 (1 << 8)
+#define USB_IRDA_BR_1152000 (1 << 7)
+#define USB_IRDA_BR_576000 (1 << 6)
+#define USB_IRDA_BR_115200 (1 << 5)
+#define USB_IRDA_BR_57600 (1 << 4)
+#define USB_IRDA_BR_38400 (1 << 3)
+#define USB_IRDA_BR_19200 (1 << 2)
+#define USB_IRDA_BR_9600 (1 << 1)
+#define USB_IRDA_BR_2400 (1 << 0)
+
+/* Additional BOFs */
+
+#define USB_IRDA_AB_0 (1 << 7)
+#define USB_IRDA_AB_1 (1 << 6)
+#define USB_IRDA_AB_2 (1 << 5)
+#define USB_IRDA_AB_3 (1 << 4)
+#define USB_IRDA_AB_6 (1 << 3)
+#define USB_IRDA_AB_12 (1 << 2)
+#define USB_IRDA_AB_24 (1 << 1)
+#define USB_IRDA_AB_48 (1 << 0)
+
+/* IRDA Rate Sniff */
+
+#define USB_IRDA_RATE_SNIFF 1
+
+/*-------------------------------------------------------------------------*/
+
+struct usb_irda_cs_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 bcdSpecRevision;
+ __u8 bmDataSize;
+ __u8 bmWindowSize;
+ __u8 bmMinTurnaroundTime;
+ __le16 wBaudRate;
+ __u8 bmAdditionalBOFs;
+ __u8 bIrdaRateSniff;
+ __u8 bMaxUnicastList;
+} __attribute__ ((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/* Data Format */
+
+#define USB_IRDA_STATUS_MEDIA_BUSY (1 << 7)
+
+/* The following is a 4-bit value used for both
+ * inbound and outbound headers:
+ *
+ * 0 - speed ignored
+ * 1 - 2400 bps
+ * 2 - 9600 bps
+ * 3 - 19200 bps
+ * 4 - 38400 bps
+ * 5 - 57600 bps
+ * 6 - 115200 bps
+ * 7 - 576000 bps
+ * 8 - 1.152 Mbps
+ * 9 - 5 mbps
+ * 10..15 - Reserved
+ */
+#define USB_IRDA_STATUS_LINK_SPEED 0x0f
+
+/* The following is a 4-bit value used only for
+ * outbound header:
+ *
+ * 0 - No change (BOF ignored)
+ * 1 - 48 BOFs
+ * 2 - 24 BOFs
+ * 3 - 12 BOFs
+ * 4 - 6 BOFs
+ * 5 - 3 BOFs
+ * 6 - 2 BOFs
+ * 7 - 1 BOFs
+ * 8 - 0 BOFs
+ * 9..15 - Reserved
+ */
+#define USB_IRDA_EXTRA_BOFS 0xf0
+
+struct usb_irda_inbound_header {
+ __u8 bmStatus;
+};
+
+struct usb_irda_outbound_header {
+ __u8 bmChange;
+};
+
+#endif /* __LINUX_USB_IRDA_H */
+
diff --git a/kernel/include/linux/usb/isp116x.h b/kernel/include/linux/usb/isp116x.h
new file mode 100644
index 000000000..96ca114e8
--- /dev/null
+++ b/kernel/include/linux/usb/isp116x.h
@@ -0,0 +1,33 @@
+/*
+ * Board initialization code should put one of these into dev->platform_data
+ * and place the isp116x onto platform_bus.
+ */
+
+#ifndef __LINUX_USB_ISP116X_H
+#define __LINUX_USB_ISP116X_H
+
+struct isp116x_platform_data {
+ /* Enable internal resistors on downstream ports */
+ unsigned sel15Kres:1;
+ /* On-chip overcurrent detection */
+ unsigned oc_enable:1;
+ /* INT output polarity */
+ unsigned int_act_high:1;
+ /* INT edge or level triggered */
+ unsigned int_edge_triggered:1;
+ /* Enable wakeup by devices on usb bus (e.g. wakeup
+ by attachment/detachment or by device activity
+ such as moving a mouse). When chosen, this option
+ prevents stopping internal clock, increasing
+ thereby power consumption in suspended state. */
+ unsigned remote_wakeup_enable:1;
+ /* Inter-io delay (ns). The chip is picky about access timings; it
+ expects at least:
+ 150ns delay between consecutive accesses to DATA_REG,
+ 300ns delay between access to ADDR_REG and DATA_REG
+ OE, WE MUST NOT be changed during these intervals
+ */
+ void (*delay) (struct device *dev, int delay);
+};
+
+#endif /* __LINUX_USB_ISP116X_H */
diff --git a/kernel/include/linux/usb/isp1301.h b/kernel/include/linux/usb/isp1301.h
new file mode 100644
index 000000000..d3a851c28
--- /dev/null
+++ b/kernel/include/linux/usb/isp1301.h
@@ -0,0 +1,80 @@
+/*
+ * NXP ISP1301 USB transceiver driver
+ *
+ * Copyright (C) 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_USB_ISP1301_H
+#define __LINUX_USB_ISP1301_H
+
+#include <linux/of.h>
+
+/* I2C Register definitions: */
+
+#define ISP1301_I2C_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */
+
+#define MC1_SPEED_REG (1 << 0)
+#define MC1_SUSPEND_REG (1 << 1)
+#define MC1_DAT_SE0 (1 << 2)
+#define MC1_TRANSPARENT (1 << 3)
+#define MC1_BDIS_ACON_EN (1 << 4)
+#define MC1_OE_INT_EN (1 << 5)
+#define MC1_UART_EN (1 << 6)
+#define MC1_MASK 0x7f
+
+#define ISP1301_I2C_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */
+
+#define MC2_GLOBAL_PWR_DN (1 << 0)
+#define MC2_SPD_SUSP_CTRL (1 << 1)
+#define MC2_BI_DI (1 << 2)
+#define MC2_TRANSP_BDIR0 (1 << 3)
+#define MC2_TRANSP_BDIR1 (1 << 4)
+#define MC2_AUDIO_EN (1 << 5)
+#define MC2_PSW_EN (1 << 6)
+#define MC2_EN2V7 (1 << 7)
+
+#define ISP1301_I2C_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */
+
+#define OTG1_DP_PULLUP (1 << 0)
+#define OTG1_DM_PULLUP (1 << 1)
+#define OTG1_DP_PULLDOWN (1 << 2)
+#define OTG1_DM_PULLDOWN (1 << 3)
+#define OTG1_ID_PULLDOWN (1 << 4)
+#define OTG1_VBUS_DRV (1 << 5)
+#define OTG1_VBUS_DISCHRG (1 << 6)
+#define OTG1_VBUS_CHRG (1 << 7)
+
+#define ISP1301_I2C_OTG_CONTROL_2 0x10 /* u8 readonly */
+
+#define OTG_B_SESS_END (1 << 6)
+#define OTG_B_SESS_VLD (1 << 7)
+
+#define ISP1301_I2C_INTERRUPT_SOURCE 0x8
+#define ISP1301_I2C_INTERRUPT_LATCH 0xA
+#define ISP1301_I2C_INTERRUPT_FALLING 0xC
+#define ISP1301_I2C_INTERRUPT_RISING 0xE
+
+#define INT_VBUS_VLD (1 << 0)
+#define INT_SESS_VLD (1 << 1)
+#define INT_DP_HI (1 << 2)
+#define INT_ID_GND (1 << 3)
+#define INT_DM_HI (1 << 4)
+#define INT_ID_FLOAT (1 << 5)
+#define INT_BDIS_ACON (1 << 6)
+#define INT_CR_INT (1 << 7)
+
+#define ISP1301_I2C_REG_CLEAR_ADDR 1 /* Register Address Modifier */
+
+struct i2c_client *isp1301_get_client(struct device_node *node);
+
+#endif /* __LINUX_USB_ISP1301_H */
diff --git a/kernel/include/linux/usb/isp1362.h b/kernel/include/linux/usb/isp1362.h
new file mode 100644
index 000000000..642684bb9
--- /dev/null
+++ b/kernel/include/linux/usb/isp1362.h
@@ -0,0 +1,46 @@
+/*
+ * board initialization code should put one of these into dev->platform_data
+ * and place the isp1362 onto platform_bus.
+ */
+
+#ifndef __LINUX_USB_ISP1362_H__
+#define __LINUX_USB_ISP1362_H__
+
+struct isp1362_platform_data {
+ /* Enable internal pulldown resistors on downstream ports */
+ unsigned sel15Kres:1;
+ /* Clock cannot be stopped */
+ unsigned clknotstop:1;
+ /* On-chip overcurrent protection */
+ unsigned oc_enable:1;
+ /* INT output polarity */
+ unsigned int_act_high:1;
+ /* INT edge or level triggered */
+ unsigned int_edge_triggered:1;
+ /* DREQ output polarity */
+ unsigned dreq_act_high:1;
+ /* DACK input polarity */
+ unsigned dack_act_high:1;
+ /* chip can be resumed via H_WAKEUP pin */
+ unsigned remote_wakeup_connected:1;
+ /* Switch or not to switch (keep always powered) */
+ unsigned no_power_switching:1;
+ /* Ganged port power switching (0) or individual port power switching (1) */
+ unsigned power_switching_mode:1;
+ /* Given port_power, msec/2 after power on till power good */
+ u8 potpg;
+ /* Hardware reset set/clear */
+ void (*reset) (struct device *dev, int set);
+ /* Clock start/stop */
+ void (*clock) (struct device *dev, int start);
+ /* Inter-io delay (ns). The chip is picky about access timings; it
+ * expects at least:
+ * 110ns delay between consecutive accesses to DATA_REG,
+ * 300ns delay between access to ADDR_REG and DATA_REG (registers)
+ * 462ns delay between access to ADDR_REG and DATA_REG (buffer memory)
+ * WE MUST NOT be activated during these intervals (even without CS!)
+ */
+ void (*delay) (struct device *dev, unsigned int delay);
+};
+
+#endif
diff --git a/kernel/include/linux/usb/isp1760.h b/kernel/include/linux/usb/isp1760.h
new file mode 100644
index 000000000..de7de53c5
--- /dev/null
+++ b/kernel/include/linux/usb/isp1760.h
@@ -0,0 +1,18 @@
+/*
+ * board initialization should put one of these into dev->platform_data
+ * and place the isp1760 onto platform_bus named "isp1760-hcd".
+ */
+
+#ifndef __LINUX_USB_ISP1760_H
+#define __LINUX_USB_ISP1760_H
+
+struct isp1760_platform_data {
+ unsigned is_isp1761:1; /* Chip is ISP1761 */
+ unsigned bus_width_16:1; /* 16/32-bit data bus width */
+ unsigned port1_otg:1; /* Port 1 supports OTG */
+ unsigned analog_oc:1; /* Analog overcurrent */
+ unsigned dack_polarity_high:1; /* DACK active high */
+ unsigned dreq_polarity_high:1; /* DREQ active high */
+};
+
+#endif /* __LINUX_USB_ISP1760_H */
diff --git a/kernel/include/linux/usb/m66592.h b/kernel/include/linux/usb/m66592.h
new file mode 100644
index 000000000..a4ba31ab2
--- /dev/null
+++ b/kernel/include/linux/usb/m66592.h
@@ -0,0 +1,46 @@
+/*
+ * M66592 driver platform data
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef __LINUX_USB_M66592_H
+#define __LINUX_USB_M66592_H
+
+#define M66592_PLATDATA_XTAL_12MHZ 0x01
+#define M66592_PLATDATA_XTAL_24MHZ 0x02
+#define M66592_PLATDATA_XTAL_48MHZ 0x03
+
+struct m66592_platdata {
+ /* one = on chip controller, zero = external controller */
+ unsigned on_chip:1;
+
+ /* one = big endian, zero = little endian */
+ unsigned endian:1;
+
+ /* (external controller only) M66592_PLATDATA_XTAL_nnMHZ */
+ unsigned xtal:2;
+
+ /* (external controller only) one = 3.3V, zero = 1.5V */
+ unsigned vif:1;
+
+ /* (external controller only) set one = WR0_N shorted to WR1_N */
+ unsigned wr0_shorted_to_wr1:1;
+};
+
+#endif /* __LINUX_USB_M66592_H */
+
diff --git a/kernel/include/linux/usb/msm_hsusb.h b/kernel/include/linux/usb/msm_hsusb.h
new file mode 100644
index 000000000..7dbecf9a4
--- /dev/null
+++ b/kernel/include/linux/usb/msm_hsusb.h
@@ -0,0 +1,171 @@
+/* linux/include/asm-arm/arch-msm/hsusb.h
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_HSUSB_H
+#define __ASM_ARCH_MSM_HSUSB_H
+
+#include <linux/types.h>
+#include <linux/usb/otg.h>
+#include <linux/clk.h>
+
+/**
+ * OTG control
+ *
+ * OTG_NO_CONTROL Id/VBUS notifications not required. Useful in host
+ * only configuration.
+ * OTG_PHY_CONTROL Id/VBUS notifications comes form USB PHY.
+ * OTG_PMIC_CONTROL Id/VBUS notifications comes from PMIC hardware.
+ * OTG_USER_CONTROL Id/VBUS notifcations comes from User via sysfs.
+ *
+ */
+enum otg_control_type {
+ OTG_NO_CONTROL = 0,
+ OTG_PHY_CONTROL,
+ OTG_PMIC_CONTROL,
+ OTG_USER_CONTROL,
+};
+
+/**
+ * PHY used in
+ *
+ * INVALID_PHY Unsupported PHY
+ * CI_45NM_INTEGRATED_PHY Chipidea 45nm integrated PHY
+ * SNPS_28NM_INTEGRATED_PHY Synopsis 28nm integrated PHY
+ *
+ */
+enum msm_usb_phy_type {
+ INVALID_PHY = 0,
+ CI_45NM_INTEGRATED_PHY,
+ SNPS_28NM_INTEGRATED_PHY,
+};
+
+#define IDEV_CHG_MAX 1500
+#define IUNIT 100
+
+/**
+ * Different states involved in USB charger detection.
+ *
+ * USB_CHG_STATE_UNDEFINED USB charger is not connected or detection
+ * process is not yet started.
+ * USB_CHG_STATE_WAIT_FOR_DCD Waiting for Data pins contact.
+ * USB_CHG_STATE_DCD_DONE Data pin contact is detected.
+ * USB_CHG_STATE_PRIMARY_DONE Primary detection is completed (Detects
+ * between SDP and DCP/CDP).
+ * USB_CHG_STATE_SECONDARY_DONE Secondary detection is completed (Detects
+ * between DCP and CDP).
+ * USB_CHG_STATE_DETECTED USB charger type is determined.
+ *
+ */
+enum usb_chg_state {
+ USB_CHG_STATE_UNDEFINED = 0,
+ USB_CHG_STATE_WAIT_FOR_DCD,
+ USB_CHG_STATE_DCD_DONE,
+ USB_CHG_STATE_PRIMARY_DONE,
+ USB_CHG_STATE_SECONDARY_DONE,
+ USB_CHG_STATE_DETECTED,
+};
+
+/**
+ * USB charger types
+ *
+ * USB_INVALID_CHARGER Invalid USB charger.
+ * USB_SDP_CHARGER Standard downstream port. Refers to a downstream port
+ * on USB2.0 compliant host/hub.
+ * USB_DCP_CHARGER Dedicated charger port (AC charger/ Wall charger).
+ * USB_CDP_CHARGER Charging downstream port. Enumeration can happen and
+ * IDEV_CHG_MAX can be drawn irrespective of USB state.
+ *
+ */
+enum usb_chg_type {
+ USB_INVALID_CHARGER = 0,
+ USB_SDP_CHARGER,
+ USB_DCP_CHARGER,
+ USB_CDP_CHARGER,
+};
+
+/**
+ * struct msm_otg_platform_data - platform device data
+ * for msm_otg driver.
+ * @phy_init_seq: PHY configuration sequence values. Value of -1 is reserved as
+ * "do not overwrite default vaule at this address".
+ * @phy_init_sz: PHY configuration sequence size.
+ * @vbus_power: VBUS power on/off routine.
+ * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
+ * @mode: Supported mode (OTG/peripheral/host).
+ * @otg_control: OTG switch controlled by user/Id pin
+ */
+struct msm_otg_platform_data {
+ int *phy_init_seq;
+ int phy_init_sz;
+ void (*vbus_power)(bool on);
+ unsigned power_budget;
+ enum usb_dr_mode mode;
+ enum otg_control_type otg_control;
+ enum msm_usb_phy_type phy_type;
+ void (*setup_gpio)(enum usb_otg_state state);
+};
+
+/**
+ * struct msm_otg: OTG driver data. Shared by HCD and DCD.
+ * @otg: USB OTG Transceiver structure.
+ * @pdata: otg device platform data.
+ * @irq: IRQ number assigned for HSUSB controller.
+ * @clk: clock struct of usb_hs_clk.
+ * @pclk: clock struct of usb_hs_pclk.
+ * @core_clk: clock struct of usb_hs_core_clk.
+ * @regs: ioremapped register base address.
+ * @inputs: OTG state machine inputs(Id, SessValid etc).
+ * @sm_work: OTG state machine work.
+ * @in_lpm: indicates low power mode (LPM) state.
+ * @async_int: Async interrupt arrived.
+ * @cur_power: The amount of mA available from downstream port.
+ * @chg_work: Charger detection work.
+ * @chg_state: The state of charger detection process.
+ * @chg_type: The type of charger attached.
+ * @dcd_retires: The retry count used to track Data contact
+ * detection process.
+ */
+struct msm_otg {
+ struct usb_phy phy;
+ struct msm_otg_platform_data *pdata;
+ int irq;
+ struct clk *clk;
+ struct clk *pclk;
+ struct clk *core_clk;
+ void __iomem *regs;
+#define ID 0
+#define B_SESS_VLD 1
+ unsigned long inputs;
+ struct work_struct sm_work;
+ atomic_t in_lpm;
+ int async_int;
+ unsigned cur_power;
+ int phy_number;
+ struct delayed_work chg_work;
+ enum usb_chg_state chg_state;
+ enum usb_chg_type chg_type;
+ u8 dcd_retries;
+ struct regulator *v3p3;
+ struct regulator *v1p8;
+ struct regulator *vddcx;
+
+ struct reset_control *phy_rst;
+ struct reset_control *link_rst;
+ int vdd_levels[3];
+};
+
+#endif
diff --git a/kernel/include/linux/usb/msm_hsusb_hw.h b/kernel/include/linux/usb/msm_hsusb_hw.h
new file mode 100644
index 000000000..a29f6030a
--- /dev/null
+++ b/kernel/include/linux/usb/msm_hsusb_hw.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_USB_GADGET_MSM72K_UDC_H__
+#define __LINUX_USB_GADGET_MSM72K_UDC_H__
+
+/* USB phy selector - in TCSR address range */
+#define USB2_PHY_SEL 0xfd4ab000
+
+#define USB_AHBBURST (MSM_USB_BASE + 0x0090)
+#define USB_AHBMODE (MSM_USB_BASE + 0x0098)
+#define USB_CAPLENGTH (MSM_USB_BASE + 0x0100) /* 8 bit */
+
+#define USB_USBCMD (MSM_USB_BASE + 0x0140)
+#define USB_PORTSC (MSM_USB_BASE + 0x0184)
+#define USB_OTGSC (MSM_USB_BASE + 0x01A4)
+#define USB_USBMODE (MSM_USB_BASE + 0x01A8)
+#define USB_PHY_CTRL (MSM_USB_BASE + 0x0240)
+#define USB_PHY_CTRL2 (MSM_USB_BASE + 0x0278)
+
+#define USBCMD_RESET 2
+#define USB_USBINTR (MSM_USB_BASE + 0x0148)
+
+#define PORTSC_PHCD (1 << 23) /* phy suspend mode */
+#define PORTSC_PTS_MASK (3 << 30)
+#define PORTSC_PTS_ULPI (2 << 30)
+#define PORTSC_PTS_SERIAL (3 << 30)
+
+#define USB_ULPI_VIEWPORT (MSM_USB_BASE + 0x0170)
+#define ULPI_RUN (1 << 30)
+#define ULPI_WRITE (1 << 29)
+#define ULPI_READ (0 << 29)
+#define ULPI_ADDR(n) (((n) & 255) << 16)
+#define ULPI_DATA(n) ((n) & 255)
+#define ULPI_DATA_READ(n) (((n) >> 8) & 255)
+
+/* synopsys 28nm phy registers */
+#define ULPI_PWR_CLK_MNG_REG 0x88
+#define OTG_COMP_DISABLE BIT(0)
+
+#define ASYNC_INTR_CTRL (1 << 29) /* Enable async interrupt */
+#define ULPI_STP_CTRL (1 << 30) /* Block communication with PHY */
+#define PHY_RETEN (1 << 1) /* PHY retention enable/disable */
+#define PHY_POR_ASSERT (1 << 0) /* USB2 28nm PHY POR ASSERT */
+
+/* OTG definitions */
+#define OTGSC_INTSTS_MASK (0x7f << 16)
+#define OTGSC_ID (1 << 8)
+#define OTGSC_BSV (1 << 11)
+#define OTGSC_IDIS (1 << 16)
+#define OTGSC_BSVIS (1 << 19)
+#define OTGSC_IDIE (1 << 24)
+#define OTGSC_BSVIE (1 << 27)
+
+#endif /* __LINUX_USB_GADGET_MSM72K_UDC_H__ */
diff --git a/kernel/include/linux/usb/musb-omap.h b/kernel/include/linux/usb/musb-omap.h
new file mode 100644
index 000000000..7774c5986
--- /dev/null
+++ b/kernel/include/linux/usb/musb-omap.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2011-2012 by Texas Instruments
+ *
+ * The Inventra Controller Driver for Linux is free software; you
+ * can redistribute it and/or modify it under the terms of the GNU
+ * General Public License version 2 as published by the Free Software
+ * Foundation.
+ */
+
+#ifndef __MUSB_OMAP_H__
+#define __MUSB_OMAP_H__
+
+enum omap_musb_vbus_id_status {
+ OMAP_MUSB_UNKNOWN = 0,
+ OMAP_MUSB_ID_GROUND,
+ OMAP_MUSB_ID_FLOAT,
+ OMAP_MUSB_VBUS_VALID,
+ OMAP_MUSB_VBUS_OFF,
+};
+
+#if (defined(CONFIG_USB_MUSB_OMAP2PLUS) || \
+ defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE))
+void omap_musb_mailbox(enum omap_musb_vbus_id_status status);
+#else
+static inline void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
+{
+}
+#endif
+
+#endif /* __MUSB_OMAP_H__ */
diff --git a/kernel/include/linux/usb/musb-ux500.h b/kernel/include/linux/usb/musb-ux500.h
new file mode 100644
index 000000000..1e2c7130f
--- /dev/null
+++ b/kernel/include/linux/usb/musb-ux500.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2013 ST-Ericsson AB
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MUSB_UX500_H__
+#define __MUSB_UX500_H__
+
+enum ux500_musb_vbus_id_status {
+ UX500_MUSB_NONE = 0,
+ UX500_MUSB_VBUS,
+ UX500_MUSB_ID,
+ UX500_MUSB_CHARGER,
+ UX500_MUSB_ENUMERATED,
+ UX500_MUSB_RIDA,
+ UX500_MUSB_RIDB,
+ UX500_MUSB_RIDC,
+ UX500_MUSB_PREPARE,
+ UX500_MUSB_CLEAN,
+};
+
+#endif /* __MUSB_UX500_H__ */
diff --git a/kernel/include/linux/usb/musb.h b/kernel/include/linux/usb/musb.h
new file mode 100644
index 000000000..a4ee1b582
--- /dev/null
+++ b/kernel/include/linux/usb/musb.h
@@ -0,0 +1,155 @@
+/*
+ * This is used to for host and peripheral modes of the driver for
+ * Inventra (Multidrop) Highspeed Dual-Role Controllers: (M)HDRC.
+ *
+ * Board initialization should put one of these into dev->platform_data,
+ * probably on some platform_device named "musb-hdrc". It encapsulates
+ * key configuration differences between boards.
+ */
+
+#ifndef __LINUX_USB_MUSB_H
+#define __LINUX_USB_MUSB_H
+
+/* The USB role is defined by the connector used on the board, so long as
+ * standards are being followed. (Developer boards sometimes won't.)
+ */
+enum musb_mode {
+ MUSB_UNDEFINED = 0,
+ MUSB_HOST, /* A or Mini-A connector */
+ MUSB_PERIPHERAL, /* B or Mini-B connector */
+ MUSB_OTG /* Mini-AB connector */
+};
+
+struct clk;
+
+enum musb_fifo_style {
+ FIFO_RXTX,
+ FIFO_TX,
+ FIFO_RX
+} __attribute__ ((packed));
+
+enum musb_buf_mode {
+ BUF_SINGLE,
+ BUF_DOUBLE
+} __attribute__ ((packed));
+
+struct musb_fifo_cfg {
+ u8 hw_ep_num;
+ enum musb_fifo_style style;
+ enum musb_buf_mode mode;
+ u16 maxpacket;
+};
+
+#define MUSB_EP_FIFO(ep, st, m, pkt) \
+{ \
+ .hw_ep_num = ep, \
+ .style = st, \
+ .mode = m, \
+ .maxpacket = pkt, \
+}
+
+#define MUSB_EP_FIFO_SINGLE(ep, st, pkt) \
+ MUSB_EP_FIFO(ep, st, BUF_SINGLE, pkt)
+
+#define MUSB_EP_FIFO_DOUBLE(ep, st, pkt) \
+ MUSB_EP_FIFO(ep, st, BUF_DOUBLE, pkt)
+
+struct musb_hdrc_eps_bits {
+ const char name[16];
+ u8 bits;
+};
+
+struct musb_hdrc_config {
+ struct musb_fifo_cfg *fifo_cfg; /* board fifo configuration */
+ unsigned fifo_cfg_size; /* size of the fifo configuration */
+
+ /* MUSB configuration-specific details */
+ unsigned multipoint:1; /* multipoint device */
+ unsigned dyn_fifo:1 __deprecated; /* supports dynamic fifo sizing */
+ unsigned soft_con:1 __deprecated; /* soft connect required */
+ unsigned utm_16:1 __deprecated; /* utm data witdh is 16 bits */
+ unsigned big_endian:1; /* true if CPU uses big-endian */
+ unsigned mult_bulk_tx:1; /* Tx ep required for multbulk pkts */
+ unsigned mult_bulk_rx:1; /* Rx ep required for multbulk pkts */
+ unsigned high_iso_tx:1; /* Tx ep required for HB iso */
+ unsigned high_iso_rx:1; /* Rx ep required for HD iso */
+ unsigned dma:1 __deprecated; /* supports DMA */
+ unsigned vendor_req:1 __deprecated; /* vendor registers required */
+
+ /* need to explicitly de-assert the port reset after resume? */
+ unsigned host_port_deassert_reset_at_resume:1;
+
+ u8 num_eps; /* number of endpoints _with_ ep0 */
+ u8 dma_channels __deprecated; /* number of dma channels */
+ u8 dyn_fifo_size; /* dynamic size in bytes */
+ u8 vendor_ctrl __deprecated; /* vendor control reg width */
+ u8 vendor_stat __deprecated; /* vendor status reg witdh */
+ u8 dma_req_chan __deprecated; /* bitmask for required dma channels */
+ u8 ram_bits; /* ram address size */
+
+ struct musb_hdrc_eps_bits *eps_bits __deprecated;
+#ifdef CONFIG_BLACKFIN
+ /* A GPIO controlling VRSEL in Blackfin */
+ unsigned int gpio_vrsel;
+ unsigned int gpio_vrsel_active;
+ /* musb CLKIN in Blackfin in MHZ */
+ unsigned char clkin;
+#endif
+
+};
+
+struct musb_hdrc_platform_data {
+ /* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */
+ u8 mode;
+
+ /* for clk_get() */
+ const char *clock;
+
+ /* (HOST or OTG) switch VBUS on/off */
+ int (*set_vbus)(struct device *dev, int is_on);
+
+ /* (HOST or OTG) mA/2 power supplied on (default = 8mA) */
+ u8 power;
+
+ /* (PERIPHERAL) mA/2 max power consumed (default = 100mA) */
+ u8 min_power;
+
+ /* (HOST or OTG) msec/2 after VBUS on till power good */
+ u8 potpgt;
+
+ /* (HOST or OTG) program PHY for external Vbus */
+ unsigned extvbus:1;
+
+ /* Power the device on or off */
+ int (*set_power)(int state);
+
+ /* MUSB configuration-specific details */
+ struct musb_hdrc_config *config;
+
+ /* Architecture specific board data */
+ void *board_data;
+
+ /* Platform specific struct musb_ops pointer */
+ const void *platform_ops;
+};
+
+
+/* TUSB 6010 support */
+
+#define TUSB6010_OSCCLK_60 16667 /* psec/clk @ 60.0 MHz */
+#define TUSB6010_REFCLK_24 41667 /* psec/clk @ 24.0 MHz XI */
+#define TUSB6010_REFCLK_19 52083 /* psec/clk @ 19.2 MHz CLKIN */
+
+#ifdef CONFIG_ARCH_OMAP2
+
+extern int __init tusb6010_setup_interface(
+ struct musb_hdrc_platform_data *data,
+ unsigned ps_refclk, unsigned waitpin,
+ unsigned async_cs, unsigned sync_cs,
+ unsigned irq, unsigned dmachan);
+
+extern int tusb6010_platform_retime(unsigned is_refclk);
+
+#endif /* OMAP2 */
+
+#endif /* __LINUX_USB_MUSB_H */
diff --git a/kernel/include/linux/usb/net2280.h b/kernel/include/linux/usb/net2280.h
new file mode 100644
index 000000000..148b8fa5b
--- /dev/null
+++ b/kernel/include/linux/usb/net2280.h
@@ -0,0 +1,443 @@
+/*
+ * NetChip 2280 high/full speed USB device controller.
+ * Unlike many such controllers, this one talks PCI.
+ *
+ * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
+ * Copyright (C) 2003 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_USB_NET2280_H
+#define __LINUX_USB_NET2280_H
+
+/*-------------------------------------------------------------------------*/
+
+/* NET2280 MEMORY MAPPED REGISTERS
+ *
+ * The register layout came from the chip documentation, and the bit
+ * number definitions were extracted from chip specification.
+ *
+ * Use the shift operator ('<<') to build bit masks, with readl/writel
+ * to access the registers through PCI.
+ */
+
+/* main registers, BAR0 + 0x0000 */
+struct net2280_regs {
+ /* offset 0x0000 */
+ u32 devinit;
+#define LOCAL_CLOCK_FREQUENCY 8
+#define FORCE_PCI_RESET 7
+#define PCI_ID 6
+#define PCI_ENABLE 5
+#define FIFO_SOFT_RESET 4
+#define CFG_SOFT_RESET 3
+#define PCI_SOFT_RESET 2
+#define USB_SOFT_RESET 1
+#define M8051_RESET 0
+ u32 eectl;
+#define EEPROM_ADDRESS_WIDTH 23
+#define EEPROM_CHIP_SELECT_ACTIVE 22
+#define EEPROM_PRESENT 21
+#define EEPROM_VALID 20
+#define EEPROM_BUSY 19
+#define EEPROM_CHIP_SELECT_ENABLE 18
+#define EEPROM_BYTE_READ_START 17
+#define EEPROM_BYTE_WRITE_START 16
+#define EEPROM_READ_DATA 8
+#define EEPROM_WRITE_DATA 0
+ u32 eeclkfreq;
+ u32 _unused0;
+ /* offset 0x0010 */
+
+ u32 pciirqenb0; /* interrupt PCI master ... */
+#define SETUP_PACKET_INTERRUPT_ENABLE 7
+#define ENDPOINT_F_INTERRUPT_ENABLE 6
+#define ENDPOINT_E_INTERRUPT_ENABLE 5
+#define ENDPOINT_D_INTERRUPT_ENABLE 4
+#define ENDPOINT_C_INTERRUPT_ENABLE 3
+#define ENDPOINT_B_INTERRUPT_ENABLE 2
+#define ENDPOINT_A_INTERRUPT_ENABLE 1
+#define ENDPOINT_0_INTERRUPT_ENABLE 0
+ u32 pciirqenb1;
+#define PCI_INTERRUPT_ENABLE 31
+#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
+#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
+#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
+#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
+#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
+#define PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE 18
+#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
+#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
+#define GPIO_INTERRUPT_ENABLE 13
+#define DMA_D_INTERRUPT_ENABLE 12
+#define DMA_C_INTERRUPT_ENABLE 11
+#define DMA_B_INTERRUPT_ENABLE 10
+#define DMA_A_INTERRUPT_ENABLE 9
+#define EEPROM_DONE_INTERRUPT_ENABLE 8
+#define VBUS_INTERRUPT_ENABLE 7
+#define CONTROL_STATUS_INTERRUPT_ENABLE 6
+#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
+#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
+#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
+#define RESUME_INTERRUPT_ENABLE 1
+#define SOF_INTERRUPT_ENABLE 0
+ u32 cpu_irqenb0; /* ... or onboard 8051 */
+#define SETUP_PACKET_INTERRUPT_ENABLE 7
+#define ENDPOINT_F_INTERRUPT_ENABLE 6
+#define ENDPOINT_E_INTERRUPT_ENABLE 5
+#define ENDPOINT_D_INTERRUPT_ENABLE 4
+#define ENDPOINT_C_INTERRUPT_ENABLE 3
+#define ENDPOINT_B_INTERRUPT_ENABLE 2
+#define ENDPOINT_A_INTERRUPT_ENABLE 1
+#define ENDPOINT_0_INTERRUPT_ENABLE 0
+ u32 cpu_irqenb1;
+#define CPU_INTERRUPT_ENABLE 31
+#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
+#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
+#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
+#define PCI_INTA_INTERRUPT_ENABLE 24
+#define PCI_PME_INTERRUPT_ENABLE 23
+#define PCI_SERR_INTERRUPT_ENABLE 22
+#define PCI_PERR_INTERRUPT_ENABLE 21
+#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
+#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
+#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
+#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
+#define GPIO_INTERRUPT_ENABLE 13
+#define DMA_D_INTERRUPT_ENABLE 12
+#define DMA_C_INTERRUPT_ENABLE 11
+#define DMA_B_INTERRUPT_ENABLE 10
+#define DMA_A_INTERRUPT_ENABLE 9
+#define EEPROM_DONE_INTERRUPT_ENABLE 8
+#define VBUS_INTERRUPT_ENABLE 7
+#define CONTROL_STATUS_INTERRUPT_ENABLE 6
+#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
+#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
+#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
+#define RESUME_INTERRUPT_ENABLE 1
+#define SOF_INTERRUPT_ENABLE 0
+
+ /* offset 0x0020 */
+ u32 _unused1;
+ u32 usbirqenb1;
+#define USB_INTERRUPT_ENABLE 31
+#define POWER_STATE_CHANGE_INTERRUPT_ENABLE 27
+#define PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE 26
+#define PCI_PARITY_ERROR_INTERRUPT_ENABLE 25
+#define PCI_INTA_INTERRUPT_ENABLE 24
+#define PCI_PME_INTERRUPT_ENABLE 23
+#define PCI_SERR_INTERRUPT_ENABLE 22
+#define PCI_PERR_INTERRUPT_ENABLE 21
+#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE 20
+#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE 19
+#define PCI_RETRY_ABORT_INTERRUPT_ENABLE 17
+#define PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE 16
+#define GPIO_INTERRUPT_ENABLE 13
+#define DMA_D_INTERRUPT_ENABLE 12
+#define DMA_C_INTERRUPT_ENABLE 11
+#define DMA_B_INTERRUPT_ENABLE 10
+#define DMA_A_INTERRUPT_ENABLE 9
+#define EEPROM_DONE_INTERRUPT_ENABLE 8
+#define VBUS_INTERRUPT_ENABLE 7
+#define CONTROL_STATUS_INTERRUPT_ENABLE 6
+#define ROOT_PORT_RESET_INTERRUPT_ENABLE 4
+#define SUSPEND_REQUEST_INTERRUPT_ENABLE 3
+#define SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE 2
+#define RESUME_INTERRUPT_ENABLE 1
+#define SOF_INTERRUPT_ENABLE 0
+ u32 irqstat0;
+#define INTA_ASSERTED 12
+#define SETUP_PACKET_INTERRUPT 7
+#define ENDPOINT_F_INTERRUPT 6
+#define ENDPOINT_E_INTERRUPT 5
+#define ENDPOINT_D_INTERRUPT 4
+#define ENDPOINT_C_INTERRUPT 3
+#define ENDPOINT_B_INTERRUPT 2
+#define ENDPOINT_A_INTERRUPT 1
+#define ENDPOINT_0_INTERRUPT 0
+ u32 irqstat1;
+#define POWER_STATE_CHANGE_INTERRUPT 27
+#define PCI_ARBITER_TIMEOUT_INTERRUPT 26
+#define PCI_PARITY_ERROR_INTERRUPT 25
+#define PCI_INTA_INTERRUPT 24
+#define PCI_PME_INTERRUPT 23
+#define PCI_SERR_INTERRUPT 22
+#define PCI_PERR_INTERRUPT 21
+#define PCI_MASTER_ABORT_RECEIVED_INTERRUPT 20
+#define PCI_TARGET_ABORT_RECEIVED_INTERRUPT 19
+#define PCI_RETRY_ABORT_INTERRUPT 17
+#define PCI_MASTER_CYCLE_DONE_INTERRUPT 16
+#define SOF_DOWN_INTERRUPT 14
+#define GPIO_INTERRUPT 13
+#define DMA_D_INTERRUPT 12
+#define DMA_C_INTERRUPT 11
+#define DMA_B_INTERRUPT 10
+#define DMA_A_INTERRUPT 9
+#define EEPROM_DONE_INTERRUPT 8
+#define VBUS_INTERRUPT 7
+#define CONTROL_STATUS_INTERRUPT 6
+#define ROOT_PORT_RESET_INTERRUPT 4
+#define SUSPEND_REQUEST_INTERRUPT 3
+#define SUSPEND_REQUEST_CHANGE_INTERRUPT 2
+#define RESUME_INTERRUPT 1
+#define SOF_INTERRUPT 0
+ /* offset 0x0030 */
+ u32 idxaddr;
+ u32 idxdata;
+ u32 fifoctl;
+#define PCI_BASE2_RANGE 16
+#define IGNORE_FIFO_AVAILABILITY 3
+#define PCI_BASE2_SELECT 2
+#define FIFO_CONFIGURATION_SELECT 0
+ u32 _unused2;
+ /* offset 0x0040 */
+ u32 memaddr;
+#define START 28
+#define DIRECTION 27
+#define FIFO_DIAGNOSTIC_SELECT 24
+#define MEMORY_ADDRESS 0
+ u32 memdata0;
+ u32 memdata1;
+ u32 _unused3;
+ /* offset 0x0050 */
+ u32 gpioctl;
+#define GPIO3_LED_SELECT 12
+#define GPIO3_INTERRUPT_ENABLE 11
+#define GPIO2_INTERRUPT_ENABLE 10
+#define GPIO1_INTERRUPT_ENABLE 9
+#define GPIO0_INTERRUPT_ENABLE 8
+#define GPIO3_OUTPUT_ENABLE 7
+#define GPIO2_OUTPUT_ENABLE 6
+#define GPIO1_OUTPUT_ENABLE 5
+#define GPIO0_OUTPUT_ENABLE 4
+#define GPIO3_DATA 3
+#define GPIO2_DATA 2
+#define GPIO1_DATA 1
+#define GPIO0_DATA 0
+ u32 gpiostat;
+#define GPIO3_INTERRUPT 3
+#define GPIO2_INTERRUPT 2
+#define GPIO1_INTERRUPT 1
+#define GPIO0_INTERRUPT 0
+} __attribute__ ((packed));
+
+/* usb control, BAR0 + 0x0080 */
+struct net2280_usb_regs {
+ /* offset 0x0080 */
+ u32 stdrsp;
+#define STALL_UNSUPPORTED_REQUESTS 31
+#define SET_TEST_MODE 16
+#define GET_OTHER_SPEED_CONFIGURATION 15
+#define GET_DEVICE_QUALIFIER 14
+#define SET_ADDRESS 13
+#define ENDPOINT_SET_CLEAR_HALT 12
+#define DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP 11
+#define GET_STRING_DESCRIPTOR_2 10
+#define GET_STRING_DESCRIPTOR_1 9
+#define GET_STRING_DESCRIPTOR_0 8
+#define GET_SET_INTERFACE 6
+#define GET_SET_CONFIGURATION 5
+#define GET_CONFIGURATION_DESCRIPTOR 4
+#define GET_DEVICE_DESCRIPTOR 3
+#define GET_ENDPOINT_STATUS 2
+#define GET_INTERFACE_STATUS 1
+#define GET_DEVICE_STATUS 0
+ u32 prodvendid;
+#define PRODUCT_ID 16
+#define VENDOR_ID 0
+ u32 relnum;
+ u32 usbctl;
+#define SERIAL_NUMBER_INDEX 16
+#define PRODUCT_ID_STRING_ENABLE 13
+#define VENDOR_ID_STRING_ENABLE 12
+#define USB_ROOT_PORT_WAKEUP_ENABLE 11
+#define VBUS_PIN 10
+#define TIMED_DISCONNECT 9
+#define SUSPEND_IMMEDIATELY 7
+#define SELF_POWERED_USB_DEVICE 6
+#define REMOTE_WAKEUP_SUPPORT 5
+#define PME_POLARITY 4
+#define USB_DETECT_ENABLE 3
+#define PME_WAKEUP_ENABLE 2
+#define DEVICE_REMOTE_WAKEUP_ENABLE 1
+#define SELF_POWERED_STATUS 0
+ /* offset 0x0090 */
+ u32 usbstat;
+#define HIGH_SPEED 7
+#define FULL_SPEED 6
+#define GENERATE_RESUME 5
+#define GENERATE_DEVICE_REMOTE_WAKEUP 4
+ u32 xcvrdiag;
+#define FORCE_HIGH_SPEED_MODE 31
+#define FORCE_FULL_SPEED_MODE 30
+#define USB_TEST_MODE 24
+#define LINE_STATE 16
+#define TRANSCEIVER_OPERATION_MODE 2
+#define TRANSCEIVER_SELECT 1
+#define TERMINATION_SELECT 0
+ u32 setup0123;
+ u32 setup4567;
+ /* offset 0x0090 */
+ u32 _unused0;
+ u32 ouraddr;
+#define FORCE_IMMEDIATE 7
+#define OUR_USB_ADDRESS 0
+ u32 ourconfig;
+} __attribute__ ((packed));
+
+/* pci control, BAR0 + 0x0100 */
+struct net2280_pci_regs {
+ /* offset 0x0100 */
+ u32 pcimstctl;
+#define PCI_ARBITER_PARK_SELECT 13
+#define PCI_MULTI LEVEL_ARBITER 12
+#define PCI_RETRY_ABORT_ENABLE 11
+#define DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE 10
+#define DMA_READ_MULTIPLE_ENABLE 9
+#define DMA_READ_LINE_ENABLE 8
+#define PCI_MASTER_COMMAND_SELECT 6
+#define MEM_READ_OR_WRITE 0
+#define IO_READ_OR_WRITE 1
+#define CFG_READ_OR_WRITE 2
+#define PCI_MASTER_START 5
+#define PCI_MASTER_READ_WRITE 4
+#define PCI_MASTER_WRITE 0
+#define PCI_MASTER_READ 1
+#define PCI_MASTER_BYTE_WRITE_ENABLES 0
+ u32 pcimstaddr;
+ u32 pcimstdata;
+ u32 pcimststat;
+#define PCI_ARBITER_CLEAR 2
+#define PCI_EXTERNAL_ARBITER 1
+#define PCI_HOST_MODE 0
+} __attribute__ ((packed));
+
+/* dma control, BAR0 + 0x0180 ... array of four structs like this,
+ * for channels 0..3. see also struct net2280_dma: descriptor
+ * that can be loaded into some of these registers.
+ */
+struct net2280_dma_regs { /* [11.7] */
+ /* offset 0x0180, 0x01a0, 0x01c0, 0x01e0, */
+ u32 dmactl;
+#define DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE 25
+#define DMA_CLEAR_COUNT_ENABLE 21
+#define DESCRIPTOR_POLLING_RATE 19
+#define POLL_CONTINUOUS 0
+#define POLL_1_USEC 1
+#define POLL_100_USEC 2
+#define POLL_1_MSEC 3
+#define DMA_VALID_BIT_POLLING_ENABLE 18
+#define DMA_VALID_BIT_ENABLE 17
+#define DMA_SCATTER_GATHER_ENABLE 16
+#define DMA_OUT_AUTO_START_ENABLE 4
+#define DMA_PREEMPT_ENABLE 3
+#define DMA_FIFO_VALIDATE 2
+#define DMA_ENABLE 1
+#define DMA_ADDRESS_HOLD 0
+ u32 dmastat;
+#define DMA_ABORT_DONE_INTERRUPT 27
+#define DMA_SCATTER_GATHER_DONE_INTERRUPT 25
+#define DMA_TRANSACTION_DONE_INTERRUPT 24
+#define DMA_ABORT 1
+#define DMA_START 0
+ u32 _unused0[2];
+ /* offset 0x0190, 0x01b0, 0x01d0, 0x01f0, */
+ u32 dmacount;
+#define VALID_BIT 31
+#define DMA_DIRECTION 30
+#define DMA_DONE_INTERRUPT_ENABLE 29
+#define END_OF_CHAIN 28
+#define DMA_BYTE_COUNT_MASK ((1<<24)-1)
+#define DMA_BYTE_COUNT 0
+ u32 dmaaddr;
+ u32 dmadesc;
+ u32 _unused1;
+} __attribute__ ((packed));
+
+/* dedicated endpoint registers, BAR0 + 0x0200 */
+
+struct net2280_dep_regs { /* [11.8] */
+ /* offset 0x0200, 0x0210, 0x220, 0x230, 0x240 */
+ u32 dep_cfg;
+ /* offset 0x0204, 0x0214, 0x224, 0x234, 0x244 */
+ u32 dep_rsp;
+ u32 _unused[2];
+} __attribute__ ((packed));
+
+/* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs
+ * like this, for ep0 then the configurable endpoints A..F
+ * ep0 reserved for control; E and F have only 64 bytes of fifo
+ */
+struct net2280_ep_regs { /* [11.9] */
+ /* offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0 */
+ u32 ep_cfg;
+#define ENDPOINT_BYTE_COUNT 16
+#define ENDPOINT_ENABLE 10
+#define ENDPOINT_TYPE 8
+#define ENDPOINT_DIRECTION 7
+#define ENDPOINT_NUMBER 0
+ u32 ep_rsp;
+#define SET_NAK_OUT_PACKETS 15
+#define SET_EP_HIDE_STATUS_PHASE 14
+#define SET_EP_FORCE_CRC_ERROR 13
+#define SET_INTERRUPT_MODE 12
+#define SET_CONTROL_STATUS_PHASE_HANDSHAKE 11
+#define SET_NAK_OUT_PACKETS_MODE 10
+#define SET_ENDPOINT_TOGGLE 9
+#define SET_ENDPOINT_HALT 8
+#define CLEAR_NAK_OUT_PACKETS 7
+#define CLEAR_EP_HIDE_STATUS_PHASE 6
+#define CLEAR_EP_FORCE_CRC_ERROR 5
+#define CLEAR_INTERRUPT_MODE 4
+#define CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE 3
+#define CLEAR_NAK_OUT_PACKETS_MODE 2
+#define CLEAR_ENDPOINT_TOGGLE 1
+#define CLEAR_ENDPOINT_HALT 0
+ u32 ep_irqenb;
+#define SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE 6
+#define SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE 5
+#define DATA_PACKET_RECEIVED_INTERRUPT_ENABLE 3
+#define DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE 2
+#define DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE 1
+#define DATA_IN_TOKEN_INTERRUPT_ENABLE 0
+ u32 ep_stat;
+#define FIFO_VALID_COUNT 24
+#define HIGH_BANDWIDTH_OUT_TRANSACTION_PID 22
+#define TIMEOUT 21
+#define USB_STALL_SENT 20
+#define USB_IN_NAK_SENT 19
+#define USB_IN_ACK_RCVD 18
+#define USB_OUT_PING_NAK_SENT 17
+#define USB_OUT_ACK_SENT 16
+#define FIFO_OVERFLOW 13
+#define FIFO_UNDERFLOW 12
+#define FIFO_FULL 11
+#define FIFO_EMPTY 10
+#define FIFO_FLUSH 9
+#define SHORT_PACKET_OUT_DONE_INTERRUPT 6
+#define SHORT_PACKET_TRANSFERRED_INTERRUPT 5
+#define NAK_OUT_PACKETS 4
+#define DATA_PACKET_RECEIVED_INTERRUPT 3
+#define DATA_PACKET_TRANSMITTED_INTERRUPT 2
+#define DATA_OUT_PING_TOKEN_INTERRUPT 1
+#define DATA_IN_TOKEN_INTERRUPT 0
+ /* offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0 */
+ u32 ep_avail;
+ u32 ep_data;
+ u32 _unused0[2];
+} __attribute__ ((packed));
+
+#endif /* __LINUX_USB_NET2280_H */
diff --git a/kernel/include/linux/usb/of.h b/kernel/include/linux/usb/of.h
new file mode 100644
index 000000000..cfe0528cd
--- /dev/null
+++ b/kernel/include/linux/usb/of.h
@@ -0,0 +1,45 @@
+/*
+ * OF helpers for usb devices.
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_USB_OF_H
+#define __LINUX_USB_OF_H
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/phy.h>
+
+#if IS_ENABLED(CONFIG_OF)
+enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np);
+enum usb_device_speed of_usb_get_maximum_speed(struct device_node *np);
+bool of_usb_host_tpl_support(struct device_node *np);
+#else
+static inline enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+{
+ return USB_DR_MODE_UNKNOWN;
+}
+
+static inline enum usb_device_speed
+of_usb_get_maximum_speed(struct device_node *np)
+{
+ return USB_SPEED_UNKNOWN;
+}
+static inline bool of_usb_host_tpl_support(struct device_node *np)
+{
+ return false;
+}
+#endif
+
+#if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_USB_SUPPORT)
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np);
+#else
+static inline enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+ return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+
+#endif
+
+#endif /* __LINUX_USB_OF_H */
diff --git a/kernel/include/linux/usb/ohci_pdriver.h b/kernel/include/linux/usb/ohci_pdriver.h
new file mode 100644
index 000000000..012f2b7eb
--- /dev/null
+++ b/kernel/include/linux/usb/ohci_pdriver.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __USB_CORE_OHCI_PDRIVER_H
+#define __USB_CORE_OHCI_PDRIVER_H
+
+/**
+ * struct usb_ohci_pdata - platform_data for generic ohci driver
+ *
+ * @big_endian_desc: BE descriptors
+ * @big_endian_mmio: BE registers
+ * @no_big_frame_no: no big endian frame_no shift
+ * @num_ports: number of ports
+ *
+ * These are general configuration options for the OHCI controller. All of
+ * these options are activating more or less workarounds for some hardware.
+ */
+struct usb_ohci_pdata {
+ unsigned big_endian_desc:1;
+ unsigned big_endian_mmio:1;
+ unsigned no_big_frame_no:1;
+ unsigned int num_ports;
+
+ /* Turn on all power and clocks */
+ int (*power_on)(struct platform_device *pdev);
+ /* Turn off all power and clocks */
+ void (*power_off)(struct platform_device *pdev);
+ /* Turn on only VBUS suspend power and hotplug detection,
+ * turn off everything else */
+ void (*power_suspend)(struct platform_device *pdev);
+};
+
+#endif /* __USB_CORE_OHCI_PDRIVER_H */
diff --git a/kernel/include/linux/usb/otg-fsm.h b/kernel/include/linux/usb/otg-fsm.h
new file mode 100644
index 000000000..f728f1854
--- /dev/null
+++ b/kernel/include/linux/usb/otg-fsm.h
@@ -0,0 +1,246 @@
+/* Copyright (C) 2007,2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __LINUX_USB_OTG_FSM_H
+#define __LINUX_USB_OTG_FSM_H
+
+#include <linux/mutex.h>
+#include <linux/errno.h>
+
+#undef VERBOSE
+
+#ifdef VERBOSE
+#define VDBG(fmt, args...) pr_debug("[%s] " fmt , \
+ __func__, ## args)
+#else
+#define VDBG(stuff...) do {} while (0)
+#endif
+
+#ifdef VERBOSE
+#define MPC_LOC printk("Current Location [%s]:[%d]\n", __FILE__, __LINE__)
+#else
+#define MPC_LOC do {} while (0)
+#endif
+
+#define PROTO_UNDEF (0)
+#define PROTO_HOST (1)
+#define PROTO_GADGET (2)
+
+enum otg_fsm_timer {
+ /* Standard OTG timers */
+ A_WAIT_VRISE,
+ A_WAIT_VFALL,
+ A_WAIT_BCON,
+ A_AIDL_BDIS,
+ B_ASE0_BRST,
+ A_BIDL_ADIS,
+
+ /* Auxiliary timers */
+ B_SE0_SRP,
+ B_SRP_FAIL,
+ A_WAIT_ENUM,
+ B_DATA_PLS,
+ B_SSEND_SRP,
+
+ NUM_OTG_FSM_TIMERS,
+};
+
+/* OTG state machine according to the OTG spec */
+struct otg_fsm {
+ /* Input */
+ int id;
+ int adp_change;
+ int power_up;
+ int test_device;
+ int a_bus_drop;
+ int a_bus_req;
+ int a_srp_det;
+ int a_vbus_vld;
+ int b_conn;
+ int a_bus_resume;
+ int a_bus_suspend;
+ int a_conn;
+ int b_bus_req;
+ int b_se0_srp;
+ int b_ssend_srp;
+ int b_sess_vld;
+ /* Auxilary inputs */
+ int a_sess_vld;
+ int b_bus_resume;
+ int b_bus_suspend;
+
+ /* Output */
+ int data_pulse;
+ int drv_vbus;
+ int loc_conn;
+ int loc_sof;
+ int adp_prb;
+ int adp_sns;
+
+ /* Internal variables */
+ int a_set_b_hnp_en;
+ int b_srp_done;
+ int b_hnp_enable;
+ int a_clr_err;
+
+ /* Informative variables */
+ int a_bus_drop_inf;
+ int a_bus_req_inf;
+ int a_clr_err_inf;
+ int b_bus_req_inf;
+ /* Auxilary informative variables */
+ int a_suspend_req_inf;
+
+ /* Timeout indicator for timers */
+ int a_wait_vrise_tmout;
+ int a_wait_vfall_tmout;
+ int a_wait_bcon_tmout;
+ int a_aidl_bdis_tmout;
+ int b_ase0_brst_tmout;
+ int a_bidl_adis_tmout;
+
+ struct otg_fsm_ops *ops;
+ struct usb_otg *otg;
+
+ /* Current usb protocol used: 0:undefine; 1:host; 2:client */
+ int protocol;
+ struct mutex lock;
+};
+
+struct otg_fsm_ops {
+ void (*chrg_vbus)(struct otg_fsm *fsm, int on);
+ void (*drv_vbus)(struct otg_fsm *fsm, int on);
+ void (*loc_conn)(struct otg_fsm *fsm, int on);
+ void (*loc_sof)(struct otg_fsm *fsm, int on);
+ void (*start_pulse)(struct otg_fsm *fsm);
+ void (*start_adp_prb)(struct otg_fsm *fsm);
+ void (*start_adp_sns)(struct otg_fsm *fsm);
+ void (*add_timer)(struct otg_fsm *fsm, enum otg_fsm_timer timer);
+ void (*del_timer)(struct otg_fsm *fsm, enum otg_fsm_timer timer);
+ int (*start_host)(struct otg_fsm *fsm, int on);
+ int (*start_gadget)(struct otg_fsm *fsm, int on);
+};
+
+
+static inline int otg_chrg_vbus(struct otg_fsm *fsm, int on)
+{
+ if (!fsm->ops->chrg_vbus)
+ return -EOPNOTSUPP;
+ fsm->ops->chrg_vbus(fsm, on);
+ return 0;
+}
+
+static inline int otg_drv_vbus(struct otg_fsm *fsm, int on)
+{
+ if (!fsm->ops->drv_vbus)
+ return -EOPNOTSUPP;
+ if (fsm->drv_vbus != on) {
+ fsm->drv_vbus = on;
+ fsm->ops->drv_vbus(fsm, on);
+ }
+ return 0;
+}
+
+static inline int otg_loc_conn(struct otg_fsm *fsm, int on)
+{
+ if (!fsm->ops->loc_conn)
+ return -EOPNOTSUPP;
+ if (fsm->loc_conn != on) {
+ fsm->loc_conn = on;
+ fsm->ops->loc_conn(fsm, on);
+ }
+ return 0;
+}
+
+static inline int otg_loc_sof(struct otg_fsm *fsm, int on)
+{
+ if (!fsm->ops->loc_sof)
+ return -EOPNOTSUPP;
+ if (fsm->loc_sof != on) {
+ fsm->loc_sof = on;
+ fsm->ops->loc_sof(fsm, on);
+ }
+ return 0;
+}
+
+static inline int otg_start_pulse(struct otg_fsm *fsm)
+{
+ if (!fsm->ops->start_pulse)
+ return -EOPNOTSUPP;
+ if (!fsm->data_pulse) {
+ fsm->data_pulse = 1;
+ fsm->ops->start_pulse(fsm);
+ }
+ return 0;
+}
+
+static inline int otg_start_adp_prb(struct otg_fsm *fsm)
+{
+ if (!fsm->ops->start_adp_prb)
+ return -EOPNOTSUPP;
+ if (!fsm->adp_prb) {
+ fsm->adp_sns = 0;
+ fsm->adp_prb = 1;
+ fsm->ops->start_adp_prb(fsm);
+ }
+ return 0;
+}
+
+static inline int otg_start_adp_sns(struct otg_fsm *fsm)
+{
+ if (!fsm->ops->start_adp_sns)
+ return -EOPNOTSUPP;
+ if (!fsm->adp_sns) {
+ fsm->adp_sns = 1;
+ fsm->ops->start_adp_sns(fsm);
+ }
+ return 0;
+}
+
+static inline int otg_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer timer)
+{
+ if (!fsm->ops->add_timer)
+ return -EOPNOTSUPP;
+ fsm->ops->add_timer(fsm, timer);
+ return 0;
+}
+
+static inline int otg_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer timer)
+{
+ if (!fsm->ops->del_timer)
+ return -EOPNOTSUPP;
+ fsm->ops->del_timer(fsm, timer);
+ return 0;
+}
+
+static inline int otg_start_host(struct otg_fsm *fsm, int on)
+{
+ if (!fsm->ops->start_host)
+ return -EOPNOTSUPP;
+ return fsm->ops->start_host(fsm, on);
+}
+
+static inline int otg_start_gadget(struct otg_fsm *fsm, int on)
+{
+ if (!fsm->ops->start_gadget)
+ return -EOPNOTSUPP;
+ return fsm->ops->start_gadget(fsm, on);
+}
+
+int otg_statemachine(struct otg_fsm *fsm);
+
+#endif /* __LINUX_USB_OTG_FSM_H */
diff --git a/kernel/include/linux/usb/otg.h b/kernel/include/linux/usb/otg.h
new file mode 100644
index 000000000..52661c5da
--- /dev/null
+++ b/kernel/include/linux/usb/otg.h
@@ -0,0 +1,107 @@
+/* USB OTG (On The Go) defines */
+/*
+ *
+ * These APIs may be used between USB controllers. USB device drivers
+ * (for either host or peripheral roles) don't use these calls; they
+ * continue to use just usb_device and usb_gadget.
+ */
+
+#ifndef __LINUX_USB_OTG_H
+#define __LINUX_USB_OTG_H
+
+#include <linux/phy/phy.h>
+#include <linux/usb/phy.h>
+
+struct usb_otg {
+ u8 default_a;
+
+ struct phy *phy;
+ /* old usb_phy interface */
+ struct usb_phy *usb_phy;
+ struct usb_bus *host;
+ struct usb_gadget *gadget;
+
+ enum usb_otg_state state;
+
+ /* bind/unbind the host controller */
+ int (*set_host)(struct usb_otg *otg, struct usb_bus *host);
+
+ /* bind/unbind the peripheral controller */
+ int (*set_peripheral)(struct usb_otg *otg,
+ struct usb_gadget *gadget);
+
+ /* effective for A-peripheral, ignored for B devices */
+ int (*set_vbus)(struct usb_otg *otg, bool enabled);
+
+ /* for B devices only: start session with A-Host */
+ int (*start_srp)(struct usb_otg *otg);
+
+ /* start or continue HNP role switch */
+ int (*start_hnp)(struct usb_otg *otg);
+
+};
+
+extern const char *usb_otg_state_string(enum usb_otg_state state);
+
+/* Context: can sleep */
+static inline int
+otg_start_hnp(struct usb_otg *otg)
+{
+ if (otg && otg->start_hnp)
+ return otg->start_hnp(otg);
+
+ return -ENOTSUPP;
+}
+
+/* Context: can sleep */
+static inline int
+otg_set_vbus(struct usb_otg *otg, bool enabled)
+{
+ if (otg && otg->set_vbus)
+ return otg->set_vbus(otg, enabled);
+
+ return -ENOTSUPP;
+}
+
+/* for HCDs */
+static inline int
+otg_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ if (otg && otg->set_host)
+ return otg->set_host(otg, host);
+
+ return -ENOTSUPP;
+}
+
+/* for usb peripheral controller drivers */
+
+/* Context: can sleep */
+static inline int
+otg_set_peripheral(struct usb_otg *otg, struct usb_gadget *periph)
+{
+ if (otg && otg->set_peripheral)
+ return otg->set_peripheral(otg, periph);
+
+ return -ENOTSUPP;
+}
+
+static inline int
+otg_start_srp(struct usb_otg *otg)
+{
+ if (otg && otg->start_srp)
+ return otg->start_srp(otg);
+
+ return -ENOTSUPP;
+}
+
+/* for OTG controller drivers (and maybe other stuff) */
+extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num);
+
+enum usb_dr_mode {
+ USB_DR_MODE_UNKNOWN,
+ USB_DR_MODE_HOST,
+ USB_DR_MODE_PERIPHERAL,
+ USB_DR_MODE_OTG,
+};
+
+#endif /* __LINUX_USB_OTG_H */
diff --git a/kernel/include/linux/usb/phy.h b/kernel/include/linux/usb/phy.h
new file mode 100644
index 000000000..bc91b5d38
--- /dev/null
+++ b/kernel/include/linux/usb/phy.h
@@ -0,0 +1,329 @@
+/*
+ * USB PHY defines
+ *
+ * These APIs may be used between USB controllers. USB device drivers
+ * (for either host or peripheral roles) don't use these calls; they
+ * continue to use just usb_device and usb_gadget.
+ */
+
+#ifndef __LINUX_USB_PHY_H
+#define __LINUX_USB_PHY_H
+
+#include <linux/notifier.h>
+#include <linux/usb.h>
+
+enum usb_phy_interface {
+ USBPHY_INTERFACE_MODE_UNKNOWN,
+ USBPHY_INTERFACE_MODE_UTMI,
+ USBPHY_INTERFACE_MODE_UTMIW,
+ USBPHY_INTERFACE_MODE_ULPI,
+ USBPHY_INTERFACE_MODE_SERIAL,
+ USBPHY_INTERFACE_MODE_HSIC,
+};
+
+enum usb_phy_events {
+ USB_EVENT_NONE, /* no events or cable disconnected */
+ USB_EVENT_VBUS, /* vbus valid event */
+ USB_EVENT_ID, /* id was grounded */
+ USB_EVENT_CHARGER, /* usb dedicated charger */
+ USB_EVENT_ENUMERATED, /* gadget driver enumerated */
+};
+
+/* associate a type with PHY */
+enum usb_phy_type {
+ USB_PHY_TYPE_UNDEFINED,
+ USB_PHY_TYPE_USB2,
+ USB_PHY_TYPE_USB3,
+};
+
+/* OTG defines lots of enumeration states before device reset */
+enum usb_otg_state {
+ OTG_STATE_UNDEFINED = 0,
+
+ /* single-role peripheral, and dual-role default-b */
+ OTG_STATE_B_IDLE,
+ OTG_STATE_B_SRP_INIT,
+ OTG_STATE_B_PERIPHERAL,
+
+ /* extra dual-role default-b states */
+ OTG_STATE_B_WAIT_ACON,
+ OTG_STATE_B_HOST,
+
+ /* dual-role default-a */
+ OTG_STATE_A_IDLE,
+ OTG_STATE_A_WAIT_VRISE,
+ OTG_STATE_A_WAIT_BCON,
+ OTG_STATE_A_HOST,
+ OTG_STATE_A_SUSPEND,
+ OTG_STATE_A_PERIPHERAL,
+ OTG_STATE_A_WAIT_VFALL,
+ OTG_STATE_A_VBUS_ERR,
+};
+
+struct usb_phy;
+struct usb_otg;
+
+/* for transceivers connected thru an ULPI interface, the user must
+ * provide access ops
+ */
+struct usb_phy_io_ops {
+ int (*read)(struct usb_phy *x, u32 reg);
+ int (*write)(struct usb_phy *x, u32 val, u32 reg);
+};
+
+struct usb_phy {
+ struct device *dev;
+ const char *label;
+ unsigned int flags;
+
+ enum usb_phy_type type;
+ enum usb_phy_events last_event;
+
+ struct usb_otg *otg;
+
+ struct device *io_dev;
+ struct usb_phy_io_ops *io_ops;
+ void __iomem *io_priv;
+
+ /* for notification of usb_phy_events */
+ struct atomic_notifier_head notifier;
+
+ /* to pass extra port status to the root hub */
+ u16 port_status;
+ u16 port_change;
+
+ /* to support controllers that have multiple transceivers */
+ struct list_head head;
+
+ /* initialize/shutdown the OTG controller */
+ int (*init)(struct usb_phy *x);
+ void (*shutdown)(struct usb_phy *x);
+
+ /* enable/disable VBUS */
+ int (*set_vbus)(struct usb_phy *x, int on);
+
+ /* effective for B devices, ignored for A-peripheral */
+ int (*set_power)(struct usb_phy *x,
+ unsigned mA);
+
+ /* Set transceiver into suspend mode */
+ int (*set_suspend)(struct usb_phy *x,
+ int suspend);
+
+ /*
+ * Set wakeup enable for PHY, in that case, the PHY can be
+ * woken up from suspend status due to external events,
+ * like vbus change, dp/dm change and id.
+ */
+ int (*set_wakeup)(struct usb_phy *x, bool enabled);
+
+ /* notify phy connect status change */
+ int (*notify_connect)(struct usb_phy *x,
+ enum usb_device_speed speed);
+ int (*notify_disconnect)(struct usb_phy *x,
+ enum usb_device_speed speed);
+};
+
+/**
+ * struct usb_phy_bind - represent the binding for the phy
+ * @dev_name: the device name of the device that will bind to the phy
+ * @phy_dev_name: the device name of the phy
+ * @index: used if a single controller uses multiple phys
+ * @phy: reference to the phy
+ * @list: to maintain a linked list of the binding information
+ */
+struct usb_phy_bind {
+ const char *dev_name;
+ const char *phy_dev_name;
+ u8 index;
+ struct usb_phy *phy;
+ struct list_head list;
+};
+
+/* for board-specific init logic */
+extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type);
+extern int usb_add_phy_dev(struct usb_phy *);
+extern void usb_remove_phy(struct usb_phy *);
+
+/* helpers for direct access thru low-level io interface */
+static inline int usb_phy_io_read(struct usb_phy *x, u32 reg)
+{
+ if (x && x->io_ops && x->io_ops->read)
+ return x->io_ops->read(x, reg);
+
+ return -EINVAL;
+}
+
+static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg)
+{
+ if (x && x->io_ops && x->io_ops->write)
+ return x->io_ops->write(x, val, reg);
+
+ return -EINVAL;
+}
+
+static inline int
+usb_phy_init(struct usb_phy *x)
+{
+ if (x && x->init)
+ return x->init(x);
+
+ return 0;
+}
+
+static inline void
+usb_phy_shutdown(struct usb_phy *x)
+{
+ if (x && x->shutdown)
+ x->shutdown(x);
+}
+
+static inline int
+usb_phy_vbus_on(struct usb_phy *x)
+{
+ if (!x || !x->set_vbus)
+ return 0;
+
+ return x->set_vbus(x, true);
+}
+
+static inline int
+usb_phy_vbus_off(struct usb_phy *x)
+{
+ if (!x || !x->set_vbus)
+ return 0;
+
+ return x->set_vbus(x, false);
+}
+
+/* for usb host and peripheral controller drivers */
+#if IS_ENABLED(CONFIG_USB_PHY)
+extern struct usb_phy *usb_get_phy(enum usb_phy_type type);
+extern struct usb_phy *devm_usb_get_phy(struct device *dev,
+ enum usb_phy_type type);
+extern struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index);
+extern struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index);
+extern struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev,
+ const char *phandle, u8 index);
+extern void usb_put_phy(struct usb_phy *);
+extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x);
+extern int usb_bind_phy(const char *dev_name, u8 index,
+ const char *phy_dev_name);
+extern void usb_phy_set_event(struct usb_phy *x, unsigned long event);
+#else
+static inline struct usb_phy *usb_get_phy(enum usb_phy_type type)
+{
+ return ERR_PTR(-ENXIO);
+}
+
+static inline struct usb_phy *devm_usb_get_phy(struct device *dev,
+ enum usb_phy_type type)
+{
+ return ERR_PTR(-ENXIO);
+}
+
+static inline struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index)
+{
+ return ERR_PTR(-ENXIO);
+}
+
+static inline struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index)
+{
+ return ERR_PTR(-ENXIO);
+}
+
+static inline struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev,
+ const char *phandle, u8 index)
+{
+ return ERR_PTR(-ENXIO);
+}
+
+static inline void usb_put_phy(struct usb_phy *x)
+{
+}
+
+static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x)
+{
+}
+
+static inline int usb_bind_phy(const char *dev_name, u8 index,
+ const char *phy_dev_name)
+{
+ return -EOPNOTSUPP;
+}
+
+static inline void usb_phy_set_event(struct usb_phy *x, unsigned long event)
+{
+}
+#endif
+
+static inline int
+usb_phy_set_power(struct usb_phy *x, unsigned mA)
+{
+ if (x && x->set_power)
+ return x->set_power(x, mA);
+ return 0;
+}
+
+/* Context: can sleep */
+static inline int
+usb_phy_set_suspend(struct usb_phy *x, int suspend)
+{
+ if (x && x->set_suspend != NULL)
+ return x->set_suspend(x, suspend);
+ else
+ return 0;
+}
+
+static inline int
+usb_phy_set_wakeup(struct usb_phy *x, bool enabled)
+{
+ if (x && x->set_wakeup)
+ return x->set_wakeup(x, enabled);
+ else
+ return 0;
+}
+
+static inline int
+usb_phy_notify_connect(struct usb_phy *x, enum usb_device_speed speed)
+{
+ if (x && x->notify_connect)
+ return x->notify_connect(x, speed);
+ else
+ return 0;
+}
+
+static inline int
+usb_phy_notify_disconnect(struct usb_phy *x, enum usb_device_speed speed)
+{
+ if (x && x->notify_disconnect)
+ return x->notify_disconnect(x, speed);
+ else
+ return 0;
+}
+
+/* notifiers */
+static inline int
+usb_register_notifier(struct usb_phy *x, struct notifier_block *nb)
+{
+ return atomic_notifier_chain_register(&x->notifier, nb);
+}
+
+static inline void
+usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb)
+{
+ atomic_notifier_chain_unregister(&x->notifier, nb);
+}
+
+static inline const char *usb_phy_type_string(enum usb_phy_type type)
+{
+ switch (type) {
+ case USB_PHY_TYPE_USB2:
+ return "USB2 PHY";
+ case USB_PHY_TYPE_USB3:
+ return "USB3 PHY";
+ default:
+ return "UNKNOWN PHY TYPE";
+ }
+}
+#endif /* __LINUX_USB_PHY_H */
diff --git a/kernel/include/linux/usb/phy_companion.h b/kernel/include/linux/usb/phy_companion.h
new file mode 100644
index 000000000..edd2ec23d
--- /dev/null
+++ b/kernel/include/linux/usb/phy_companion.h
@@ -0,0 +1,34 @@
+/*
+ * phy-companion.h -- phy companion to indicate the comparator part of PHY
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __DRIVERS_PHY_COMPANION_H
+#define __DRIVERS_PHY_COMPANION_H
+
+#include <linux/usb/otg.h>
+
+/* phy_companion to take care of VBUS, ID and srp capabilities */
+struct phy_companion {
+
+ /* effective for A-peripheral, ignored for B devices */
+ int (*set_vbus)(struct phy_companion *x, bool enabled);
+
+ /* for B devices only: start session with A-Host */
+ int (*start_srp)(struct phy_companion *x);
+};
+
+#endif /* __DRIVERS_PHY_COMPANION_H */
diff --git a/kernel/include/linux/usb/quirks.h b/kernel/include/linux/usb/quirks.h
new file mode 100644
index 000000000..9948c874e
--- /dev/null
+++ b/kernel/include/linux/usb/quirks.h
@@ -0,0 +1,50 @@
+/*
+ * This file holds the definitions of quirks found in USB devices.
+ * Only quirks that affect the whole device, not an interface,
+ * belong here.
+ */
+
+#ifndef __LINUX_USB_QUIRKS_H
+#define __LINUX_USB_QUIRKS_H
+
+/* string descriptors must not be fetched using a 255-byte read */
+#define USB_QUIRK_STRING_FETCH_255 BIT(0)
+
+/* device can't resume correctly so reset it instead */
+#define USB_QUIRK_RESET_RESUME BIT(1)
+
+/* device can't handle Set-Interface requests */
+#define USB_QUIRK_NO_SET_INTF BIT(2)
+
+/* device can't handle its Configuration or Interface strings */
+#define USB_QUIRK_CONFIG_INTF_STRINGS BIT(3)
+
+/* device can't be reset(e.g morph devices), don't use reset */
+#define USB_QUIRK_RESET BIT(4)
+
+/* device has more interface descriptions than the bNumInterfaces count,
+ and can't handle talking to these interfaces */
+#define USB_QUIRK_HONOR_BNUMINTERFACES BIT(5)
+
+/* device needs a pause during initialization, after we read the device
+ descriptor */
+#define USB_QUIRK_DELAY_INIT BIT(6)
+
+/*
+ * For high speed and super speed interupt endpoints, the USB 2.0 and
+ * USB 3.0 spec require the interval in microframes
+ * (1 microframe = 125 microseconds) to be calculated as
+ * interval = 2 ^ (bInterval-1).
+ *
+ * Devices with this quirk report their bInterval as the result of this
+ * calculation instead of the exponent variable used in the calculation.
+ */
+#define USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL BIT(7)
+
+/* device can't handle device_qualifier descriptor requests */
+#define USB_QUIRK_DEVICE_QUALIFIER BIT(8)
+
+/* device generates spurious wakeup, ignore remote wakeup capability */
+#define USB_QUIRK_IGNORE_REMOTE_WAKEUP BIT(9)
+
+#endif /* __LINUX_USB_QUIRKS_H */
diff --git a/kernel/include/linux/usb/r8a66597.h b/kernel/include/linux/usb/r8a66597.h
new file mode 100644
index 000000000..55805f9dc
--- /dev/null
+++ b/kernel/include/linux/usb/r8a66597.h
@@ -0,0 +1,481 @@
+/*
+ * R8A66597 driver platform data
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Author : Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef __LINUX_USB_R8A66597_H
+#define __LINUX_USB_R8A66597_H
+
+#define R8A66597_PLATDATA_XTAL_12MHZ 0x01
+#define R8A66597_PLATDATA_XTAL_24MHZ 0x02
+#define R8A66597_PLATDATA_XTAL_48MHZ 0x03
+
+struct r8a66597_platdata {
+ /* This callback can control port power instead of DVSTCTR register. */
+ void (*port_power)(int port, int power);
+
+ /* This parameter is for BUSWAIT */
+ u16 buswait;
+
+ /* set one = on chip controller, set zero = external controller */
+ unsigned on_chip:1;
+
+ /* (external controller only) set R8A66597_PLATDATA_XTAL_nnMHZ */
+ unsigned xtal:2;
+
+ /* set one = 3.3V, set zero = 1.5V */
+ unsigned vif:1;
+
+ /* set one = big endian, set zero = little endian */
+ unsigned endian:1;
+
+ /* (external controller only) set one = WR0_N shorted to WR1_N */
+ unsigned wr0_shorted_to_wr1:1;
+
+ /* set one = using SUDMAC */
+ unsigned sudmac:1;
+};
+
+/* Register definitions */
+#define SYSCFG0 0x00
+#define SYSCFG1 0x02
+#define SYSSTS0 0x04
+#define SYSSTS1 0x06
+#define DVSTCTR0 0x08
+#define DVSTCTR1 0x0A
+#define TESTMODE 0x0C
+#define PINCFG 0x0E
+#define DMA0CFG 0x10
+#define DMA1CFG 0x12
+#define CFIFO 0x14
+#define D0FIFO 0x18
+#define D1FIFO 0x1C
+#define CFIFOSEL 0x20
+#define CFIFOCTR 0x22
+#define CFIFOSIE 0x24
+#define D0FIFOSEL 0x28
+#define D0FIFOCTR 0x2A
+#define D1FIFOSEL 0x2C
+#define D1FIFOCTR 0x2E
+#define INTENB0 0x30
+#define INTENB1 0x32
+#define INTENB2 0x34
+#define BRDYENB 0x36
+#define NRDYENB 0x38
+#define BEMPENB 0x3A
+#define SOFCFG 0x3C
+#define INTSTS0 0x40
+#define INTSTS1 0x42
+#define INTSTS2 0x44
+#define BRDYSTS 0x46
+#define NRDYSTS 0x48
+#define BEMPSTS 0x4A
+#define FRMNUM 0x4C
+#define UFRMNUM 0x4E
+#define USBADDR 0x50
+#define USBREQ 0x54
+#define USBVAL 0x56
+#define USBINDX 0x58
+#define USBLENG 0x5A
+#define DCPCFG 0x5C
+#define DCPMAXP 0x5E
+#define DCPCTR 0x60
+#define PIPESEL 0x64
+#define PIPECFG 0x68
+#define PIPEBUF 0x6A
+#define PIPEMAXP 0x6C
+#define PIPEPERI 0x6E
+#define PIPE1CTR 0x70
+#define PIPE2CTR 0x72
+#define PIPE3CTR 0x74
+#define PIPE4CTR 0x76
+#define PIPE5CTR 0x78
+#define PIPE6CTR 0x7A
+#define PIPE7CTR 0x7C
+#define PIPE8CTR 0x7E
+#define PIPE9CTR 0x80
+#define PIPE1TRE 0x90
+#define PIPE1TRN 0x92
+#define PIPE2TRE 0x94
+#define PIPE2TRN 0x96
+#define PIPE3TRE 0x98
+#define PIPE3TRN 0x9A
+#define PIPE4TRE 0x9C
+#define PIPE4TRN 0x9E
+#define PIPE5TRE 0xA0
+#define PIPE5TRN 0xA2
+#define DEVADD0 0xD0
+#define DEVADD1 0xD2
+#define DEVADD2 0xD4
+#define DEVADD3 0xD6
+#define DEVADD4 0xD8
+#define DEVADD5 0xDA
+#define DEVADD6 0xDC
+#define DEVADD7 0xDE
+#define DEVADD8 0xE0
+#define DEVADD9 0xE2
+#define DEVADDA 0xE4
+
+/* System Configuration Control Register */
+#define XTAL 0xC000 /* b15-14: Crystal selection */
+#define XTAL48 0x8000 /* 48MHz */
+#define XTAL24 0x4000 /* 24MHz */
+#define XTAL12 0x0000 /* 12MHz */
+#define XCKE 0x2000 /* b13: External clock enable */
+#define PLLC 0x0800 /* b11: PLL control */
+#define SCKE 0x0400 /* b10: USB clock enable */
+#define PCSDIS 0x0200 /* b9: not CS wakeup */
+#define LPSME 0x0100 /* b8: Low power sleep mode */
+#define HSE 0x0080 /* b7: Hi-speed enable */
+#define DCFM 0x0040 /* b6: Controller function select */
+#define DRPD 0x0020 /* b5: D+/- pull down control */
+#define DPRPU 0x0010 /* b4: D+ pull up control */
+#define USBE 0x0001 /* b0: USB module operation enable */
+
+/* System Configuration Status Register */
+#define OVCBIT 0x8000 /* b15-14: Over-current bit */
+#define OVCMON 0xC000 /* b15-14: Over-current monitor */
+#define SOFEA 0x0020 /* b5: SOF monitor */
+#define IDMON 0x0004 /* b3: ID-pin monitor */
+#define LNST 0x0003 /* b1-0: D+, D- line status */
+#define SE1 0x0003 /* SE1 */
+#define FS_KSTS 0x0002 /* Full-Speed K State */
+#define FS_JSTS 0x0001 /* Full-Speed J State */
+#define LS_JSTS 0x0002 /* Low-Speed J State */
+#define LS_KSTS 0x0001 /* Low-Speed K State */
+#define SE0 0x0000 /* SE0 */
+
+/* Device State Control Register */
+#define EXTLP0 0x0400 /* b10: External port */
+#define VBOUT 0x0200 /* b9: VBUS output */
+#define WKUP 0x0100 /* b8: Remote wakeup */
+#define RWUPE 0x0080 /* b7: Remote wakeup sense */
+#define USBRST 0x0040 /* b6: USB reset enable */
+#define RESUME 0x0020 /* b5: Resume enable */
+#define UACT 0x0010 /* b4: USB bus enable */
+#define RHST 0x0007 /* b1-0: Reset handshake status */
+#define HSPROC 0x0004 /* HS handshake is processing */
+#define HSMODE 0x0003 /* Hi-Speed mode */
+#define FSMODE 0x0002 /* Full-Speed mode */
+#define LSMODE 0x0001 /* Low-Speed mode */
+#define UNDECID 0x0000 /* Undecided */
+
+/* Test Mode Register */
+#define UTST 0x000F /* b3-0: Test select */
+#define H_TST_PACKET 0x000C /* HOST TEST Packet */
+#define H_TST_SE0_NAK 0x000B /* HOST TEST SE0 NAK */
+#define H_TST_K 0x000A /* HOST TEST K */
+#define H_TST_J 0x0009 /* HOST TEST J */
+#define H_TST_NORMAL 0x0000 /* HOST Normal Mode */
+#define P_TST_PACKET 0x0004 /* PERI TEST Packet */
+#define P_TST_SE0_NAK 0x0003 /* PERI TEST SE0 NAK */
+#define P_TST_K 0x0002 /* PERI TEST K */
+#define P_TST_J 0x0001 /* PERI TEST J */
+#define P_TST_NORMAL 0x0000 /* PERI Normal Mode */
+
+/* Data Pin Configuration Register */
+#define LDRV 0x8000 /* b15: Drive Current Adjust */
+#define VIF1 0x0000 /* VIF = 1.8V */
+#define VIF3 0x8000 /* VIF = 3.3V */
+#define INTA 0x0001 /* b1: USB INT-pin active */
+
+/* DMAx Pin Configuration Register */
+#define DREQA 0x4000 /* b14: Dreq active select */
+#define BURST 0x2000 /* b13: Burst mode */
+#define DACKA 0x0400 /* b10: Dack active select */
+#define DFORM 0x0380 /* b9-7: DMA mode select */
+#define CPU_ADR_RD_WR 0x0000 /* Address + RD/WR mode (CPU bus) */
+#define CPU_DACK_RD_WR 0x0100 /* DACK + RD/WR mode (CPU bus) */
+#define CPU_DACK_ONLY 0x0180 /* DACK only mode (CPU bus) */
+#define SPLIT_DACK_ONLY 0x0200 /* DACK only mode (SPLIT bus) */
+#define DENDA 0x0040 /* b6: Dend active select */
+#define PKTM 0x0020 /* b5: Packet mode */
+#define DENDE 0x0010 /* b4: Dend enable */
+#define OBUS 0x0004 /* b2: OUTbus mode */
+
+/* CFIFO/DxFIFO Port Select Register */
+#define RCNT 0x8000 /* b15: Read count mode */
+#define REW 0x4000 /* b14: Buffer rewind */
+#define DCLRM 0x2000 /* b13: DMA buffer clear mode */
+#define DREQE 0x1000 /* b12: DREQ output enable */
+#define MBW_8 0x0000 /* 8bit */
+#define MBW_16 0x0400 /* 16bit */
+#define MBW_32 0x0800 /* 32bit */
+#define BIGEND 0x0100 /* b8: Big endian mode */
+#define BYTE_LITTLE 0x0000 /* little dendian */
+#define BYTE_BIG 0x0100 /* big endifan */
+#define ISEL 0x0020 /* b5: DCP FIFO port direction select */
+#define CURPIPE 0x000F /* b2-0: PIPE select */
+
+/* CFIFO/DxFIFO Port Control Register */
+#define BVAL 0x8000 /* b15: Buffer valid flag */
+#define BCLR 0x4000 /* b14: Buffer clear */
+#define FRDY 0x2000 /* b13: FIFO ready */
+#define DTLN 0x0FFF /* b11-0: FIFO received data length */
+
+/* Interrupt Enable Register 0 */
+#define VBSE 0x8000 /* b15: VBUS interrupt */
+#define RSME 0x4000 /* b14: Resume interrupt */
+#define SOFE 0x2000 /* b13: Frame update interrupt */
+#define DVSE 0x1000 /* b12: Device state transition interrupt */
+#define CTRE 0x0800 /* b11: Control transfer stage transition interrupt */
+#define BEMPE 0x0400 /* b10: Buffer empty interrupt */
+#define NRDYE 0x0200 /* b9: Buffer not ready interrupt */
+#define BRDYE 0x0100 /* b8: Buffer ready interrupt */
+
+/* Interrupt Enable Register 1 */
+#define OVRCRE 0x8000 /* b15: Over-current interrupt */
+#define BCHGE 0x4000 /* b14: USB us chenge interrupt */
+#define DTCHE 0x1000 /* b12: Detach sense interrupt */
+#define ATTCHE 0x0800 /* b11: Attach sense interrupt */
+#define EOFERRE 0x0040 /* b6: EOF error interrupt */
+#define SIGNE 0x0020 /* b5: SETUP IGNORE interrupt */
+#define SACKE 0x0010 /* b4: SETUP ACK interrupt */
+
+/* BRDY Interrupt Enable/Status Register */
+#define BRDY9 0x0200 /* b9: PIPE9 */
+#define BRDY8 0x0100 /* b8: PIPE8 */
+#define BRDY7 0x0080 /* b7: PIPE7 */
+#define BRDY6 0x0040 /* b6: PIPE6 */
+#define BRDY5 0x0020 /* b5: PIPE5 */
+#define BRDY4 0x0010 /* b4: PIPE4 */
+#define BRDY3 0x0008 /* b3: PIPE3 */
+#define BRDY2 0x0004 /* b2: PIPE2 */
+#define BRDY1 0x0002 /* b1: PIPE1 */
+#define BRDY0 0x0001 /* b1: PIPE0 */
+
+/* NRDY Interrupt Enable/Status Register */
+#define NRDY9 0x0200 /* b9: PIPE9 */
+#define NRDY8 0x0100 /* b8: PIPE8 */
+#define NRDY7 0x0080 /* b7: PIPE7 */
+#define NRDY6 0x0040 /* b6: PIPE6 */
+#define NRDY5 0x0020 /* b5: PIPE5 */
+#define NRDY4 0x0010 /* b4: PIPE4 */
+#define NRDY3 0x0008 /* b3: PIPE3 */
+#define NRDY2 0x0004 /* b2: PIPE2 */
+#define NRDY1 0x0002 /* b1: PIPE1 */
+#define NRDY0 0x0001 /* b1: PIPE0 */
+
+/* BEMP Interrupt Enable/Status Register */
+#define BEMP9 0x0200 /* b9: PIPE9 */
+#define BEMP8 0x0100 /* b8: PIPE8 */
+#define BEMP7 0x0080 /* b7: PIPE7 */
+#define BEMP6 0x0040 /* b6: PIPE6 */
+#define BEMP5 0x0020 /* b5: PIPE5 */
+#define BEMP4 0x0010 /* b4: PIPE4 */
+#define BEMP3 0x0008 /* b3: PIPE3 */
+#define BEMP2 0x0004 /* b2: PIPE2 */
+#define BEMP1 0x0002 /* b1: PIPE1 */
+#define BEMP0 0x0001 /* b0: PIPE0 */
+
+/* SOF Pin Configuration Register */
+#define TRNENSEL 0x0100 /* b8: Select transaction enable period */
+#define BRDYM 0x0040 /* b6: BRDY clear timing */
+#define INTL 0x0020 /* b5: Interrupt sense select */
+#define EDGESTS 0x0010 /* b4: */
+#define SOFMODE 0x000C /* b3-2: SOF pin select */
+#define SOF_125US 0x0008 /* SOF OUT 125us Frame Signal */
+#define SOF_1MS 0x0004 /* SOF OUT 1ms Frame Signal */
+#define SOF_DISABLE 0x0000 /* SOF OUT Disable */
+
+/* Interrupt Status Register 0 */
+#define VBINT 0x8000 /* b15: VBUS interrupt */
+#define RESM 0x4000 /* b14: Resume interrupt */
+#define SOFR 0x2000 /* b13: SOF frame update interrupt */
+#define DVST 0x1000 /* b12: Device state transition interrupt */
+#define CTRT 0x0800 /* b11: Control transfer stage transition interrupt */
+#define BEMP 0x0400 /* b10: Buffer empty interrupt */
+#define NRDY 0x0200 /* b9: Buffer not ready interrupt */
+#define BRDY 0x0100 /* b8: Buffer ready interrupt */
+#define VBSTS 0x0080 /* b7: VBUS input port */
+#define DVSQ 0x0070 /* b6-4: Device state */
+#define DS_SPD_CNFG 0x0070 /* Suspend Configured */
+#define DS_SPD_ADDR 0x0060 /* Suspend Address */
+#define DS_SPD_DFLT 0x0050 /* Suspend Default */
+#define DS_SPD_POWR 0x0040 /* Suspend Powered */
+#define DS_SUSP 0x0040 /* Suspend */
+#define DS_CNFG 0x0030 /* Configured */
+#define DS_ADDS 0x0020 /* Address */
+#define DS_DFLT 0x0010 /* Default */
+#define DS_POWR 0x0000 /* Powered */
+#define DVSQS 0x0030 /* b5-4: Device state */
+#define VALID 0x0008 /* b3: Setup packet detected flag */
+#define CTSQ 0x0007 /* b2-0: Control transfer stage */
+#define CS_SQER 0x0006 /* Sequence error */
+#define CS_WRND 0x0005 /* Control write nodata status stage */
+#define CS_WRSS 0x0004 /* Control write status stage */
+#define CS_WRDS 0x0003 /* Control write data stage */
+#define CS_RDSS 0x0002 /* Control read status stage */
+#define CS_RDDS 0x0001 /* Control read data stage */
+#define CS_IDST 0x0000 /* Idle or setup stage */
+
+/* Interrupt Status Register 1 */
+#define OVRCR 0x8000 /* b15: Over-current interrupt */
+#define BCHG 0x4000 /* b14: USB bus chenge interrupt */
+#define DTCH 0x1000 /* b12: Detach sense interrupt */
+#define ATTCH 0x0800 /* b11: Attach sense interrupt */
+#define EOFERR 0x0040 /* b6: EOF-error interrupt */
+#define SIGN 0x0020 /* b5: Setup ignore interrupt */
+#define SACK 0x0010 /* b4: Setup acknowledge interrupt */
+
+/* Frame Number Register */
+#define OVRN 0x8000 /* b15: Overrun error */
+#define CRCE 0x4000 /* b14: Received data error */
+#define FRNM 0x07FF /* b10-0: Frame number */
+
+/* Micro Frame Number Register */
+#define UFRNM 0x0007 /* b2-0: Micro frame number */
+
+/* Default Control Pipe Maxpacket Size Register */
+/* Pipe Maxpacket Size Register */
+#define DEVSEL 0xF000 /* b15-14: Device address select */
+#define MAXP 0x007F /* b6-0: Maxpacket size of default control pipe */
+
+/* Default Control Pipe Control Register */
+#define BSTS 0x8000 /* b15: Buffer status */
+#define SUREQ 0x4000 /* b14: Send USB request */
+#define CSCLR 0x2000 /* b13: complete-split status clear */
+#define CSSTS 0x1000 /* b12: complete-split status */
+#define SUREQCLR 0x0800 /* b11: stop setup request */
+#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */
+#define SQSET 0x0080 /* b7: Sequence toggle bit set */
+#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */
+#define PBUSY 0x0020 /* b5: pipe busy */
+#define PINGE 0x0010 /* b4: ping enable */
+#define CCPL 0x0004 /* b2: Enable control transfer complete */
+#define PID 0x0003 /* b1-0: Response PID */
+#define PID_STALL11 0x0003 /* STALL */
+#define PID_STALL 0x0002 /* STALL */
+#define PID_BUF 0x0001 /* BUF */
+#define PID_NAK 0x0000 /* NAK */
+
+/* Pipe Window Select Register */
+#define PIPENM 0x0007 /* b2-0: Pipe select */
+
+/* Pipe Configuration Register */
+#define R8A66597_TYP 0xC000 /* b15-14: Transfer type */
+#define R8A66597_ISO 0xC000 /* Isochronous */
+#define R8A66597_INT 0x8000 /* Interrupt */
+#define R8A66597_BULK 0x4000 /* Bulk */
+#define R8A66597_BFRE 0x0400 /* b10: Buffer ready interrupt mode select */
+#define R8A66597_DBLB 0x0200 /* b9: Double buffer mode select */
+#define R8A66597_CNTMD 0x0100 /* b8: Continuous transfer mode select */
+#define R8A66597_SHTNAK 0x0080 /* b7: Transfer end NAK */
+#define R8A66597_DIR 0x0010 /* b4: Transfer direction select */
+#define R8A66597_EPNUM 0x000F /* b3-0: Eendpoint number select */
+
+/* Pipe Buffer Configuration Register */
+#define BUFSIZE 0x7C00 /* b14-10: Pipe buffer size */
+#define BUFNMB 0x007F /* b6-0: Pipe buffer number */
+#define PIPE0BUF 256
+#define PIPExBUF 64
+
+/* Pipe Maxpacket Size Register */
+#define MXPS 0x07FF /* b10-0: Maxpacket size */
+
+/* Pipe Cycle Configuration Register */
+#define IFIS 0x1000 /* b12: Isochronous in-buffer flush mode select */
+#define IITV 0x0007 /* b2-0: Isochronous interval */
+
+/* Pipex Control Register */
+#define BSTS 0x8000 /* b15: Buffer status */
+#define INBUFM 0x4000 /* b14: IN buffer monitor (Only for PIPE1 to 5) */
+#define CSCLR 0x2000 /* b13: complete-split status clear */
+#define CSSTS 0x1000 /* b12: complete-split status */
+#define ATREPM 0x0400 /* b10: Auto repeat mode */
+#define ACLRM 0x0200 /* b9: Out buffer auto clear mode */
+#define SQCLR 0x0100 /* b8: Sequence toggle bit clear */
+#define SQSET 0x0080 /* b7: Sequence toggle bit set */
+#define SQMON 0x0040 /* b6: Sequence toggle bit monitor */
+#define PBUSY 0x0020 /* b5: pipe busy */
+#define PID 0x0003 /* b1-0: Response PID */
+
+/* PIPExTRE */
+#define TRENB 0x0200 /* b9: Transaction counter enable */
+#define TRCLR 0x0100 /* b8: Transaction counter clear */
+
+/* PIPExTRN */
+#define TRNCNT 0xFFFF /* b15-0: Transaction counter */
+
+/* DEVADDx */
+#define UPPHUB 0x7800
+#define HUBPORT 0x0700
+#define USBSPD 0x00C0
+#define RTPORT 0x0001
+
+/* SUDMAC registers */
+#define CH0CFG 0x00
+#define CH1CFG 0x04
+#define CH0BA 0x10
+#define CH1BA 0x14
+#define CH0BBC 0x18
+#define CH1BBC 0x1C
+#define CH0CA 0x20
+#define CH1CA 0x24
+#define CH0CBC 0x28
+#define CH1CBC 0x2C
+#define CH0DEN 0x30
+#define CH1DEN 0x34
+#define DSTSCLR 0x38
+#define DBUFCTRL 0x3C
+#define DINTCTRL 0x40
+#define DINTSTS 0x44
+#define DINTSTSCLR 0x48
+#define CH0SHCTRL 0x50
+#define CH1SHCTRL 0x54
+
+/* SUDMAC Configuration Registers */
+#define SENDBUFM 0x1000 /* b12: Transmit Buffer Mode */
+#define RCVENDM 0x0100 /* b8: Receive Data Transfer End Mode */
+#define LBA_WAIT 0x0030 /* b5-4: Local Bus Access Wait */
+
+/* DMA Enable Registers */
+#define DEN 0x0001 /* b1: DMA Transfer Enable */
+
+/* DMA Status Clear Register */
+#define CH1STCLR 0x0002 /* b2: Ch1 DMA Status Clear */
+#define CH0STCLR 0x0001 /* b1: Ch0 DMA Status Clear */
+
+/* DMA Buffer Control Register */
+#define CH1BUFW 0x0200 /* b9: Ch1 DMA Buffer Data Transfer Enable */
+#define CH0BUFW 0x0100 /* b8: Ch0 DMA Buffer Data Transfer Enable */
+#define CH1BUFS 0x0002 /* b2: Ch1 DMA Buffer Data Status */
+#define CH0BUFS 0x0001 /* b1: Ch0 DMA Buffer Data Status */
+
+/* DMA Interrupt Control Register */
+#define CH1ERRE 0x0200 /* b9: Ch1 SHwy Res Err Detect Int Enable */
+#define CH0ERRE 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Enable */
+#define CH1ENDE 0x0002 /* b2: Ch1 DMA Transfer End Int Enable */
+#define CH0ENDE 0x0001 /* b1: Ch0 DMA Transfer End Int Enable */
+
+/* DMA Interrupt Status Register */
+#define CH1ERRS 0x0200 /* b9: Ch1 SHwy Res Err Detect Int Status */
+#define CH0ERRS 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Status */
+#define CH1ENDS 0x0002 /* b2: Ch1 DMA Transfer End Int Status */
+#define CH0ENDS 0x0001 /* b1: Ch0 DMA Transfer End Int Status */
+
+/* DMA Interrupt Status Clear Register */
+#define CH1ERRC 0x0200 /* b9: Ch1 SHwy Res Err Detect Int Stat Clear */
+#define CH0ERRC 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Stat Clear */
+#define CH1ENDC 0x0002 /* b2: Ch1 DMA Transfer End Int Stat Clear */
+#define CH0ENDC 0x0001 /* b1: Ch0 DMA Transfer End Int Stat Clear */
+
+#endif /* __LINUX_USB_R8A66597_H */
+
diff --git a/kernel/include/linux/usb/renesas_usbhs.h b/kernel/include/linux/usb/renesas_usbhs.h
new file mode 100644
index 000000000..f06529c14
--- /dev/null
+++ b/kernel/include/linux/usb/renesas_usbhs.h
@@ -0,0 +1,216 @@
+/*
+ * Renesas USB
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+#ifndef RENESAS_USB_H
+#define RENESAS_USB_H
+#include <linux/platform_device.h>
+#include <linux/usb/ch9.h>
+
+/*
+ * module type
+ *
+ * it will be return value from get_id
+ */
+enum {
+ USBHS_HOST = 0,
+ USBHS_GADGET,
+ USBHS_MAX,
+};
+
+/*
+ * callback functions table for driver
+ *
+ * These functions are called from platform for driver.
+ * Callback function's pointer will be set before
+ * renesas_usbhs_platform_callback :: hardware_init was called
+ */
+struct renesas_usbhs_driver_callback {
+ int (*notify_hotplug)(struct platform_device *pdev);
+};
+
+/*
+ * callback functions for platform
+ *
+ * These functions are called from driver for platform
+ */
+struct renesas_usbhs_platform_callback {
+
+ /*
+ * option:
+ *
+ * Hardware init function for platform.
+ * it is called when driver was probed.
+ */
+ int (*hardware_init)(struct platform_device *pdev);
+
+ /*
+ * option:
+ *
+ * Hardware exit function for platform.
+ * it is called when driver was removed
+ */
+ int (*hardware_exit)(struct platform_device *pdev);
+
+ /*
+ * option:
+ *
+ * for board specific clock control
+ */
+ int (*power_ctrl)(struct platform_device *pdev,
+ void __iomem *base, int enable);
+
+ /*
+ * option:
+ *
+ * Phy reset for platform
+ */
+ int (*phy_reset)(struct platform_device *pdev);
+
+ /*
+ * get USB ID function
+ * - USBHS_HOST
+ * - USBHS_GADGET
+ */
+ int (*get_id)(struct platform_device *pdev);
+
+ /*
+ * get VBUS status function.
+ */
+ int (*get_vbus)(struct platform_device *pdev);
+
+ /*
+ * option:
+ *
+ * VBUS control is needed for Host
+ */
+ int (*set_vbus)(struct platform_device *pdev, int enable);
+};
+
+/*
+ * parameters for renesas usbhs
+ *
+ * some register needs USB chip specific parameters.
+ * This struct show it to driver
+ */
+struct renesas_usbhs_driver_param {
+ /*
+ * pipe settings
+ */
+ u32 *pipe_type; /* array of USB_ENDPOINT_XFER_xxx (from ep0) */
+ int pipe_size; /* pipe_type array size */
+
+ /*
+ * option:
+ *
+ * for BUSWAIT :: BWAIT
+ * see
+ * renesas_usbhs/common.c :: usbhsc_set_buswait()
+ * */
+ int buswait_bwait;
+
+ /*
+ * option:
+ *
+ * delay time from notify_hotplug callback
+ */
+ int detection_delay; /* msec */
+
+ /*
+ * option:
+ *
+ * dma id for dmaengine
+ * The data transfer direction on D0FIFO/D1FIFO should be
+ * fixed for keeping consistency.
+ * So, the platform id settings will be..
+ * .d0_tx_id = xx_TX,
+ * .d1_rx_id = xx_RX,
+ * or
+ * .d1_tx_id = xx_TX,
+ * .d0_rx_id = xx_RX,
+ */
+ int d0_tx_id;
+ int d0_rx_id;
+ int d1_tx_id;
+ int d1_rx_id;
+ int d2_tx_id;
+ int d2_rx_id;
+ int d3_tx_id;
+ int d3_rx_id;
+
+ /*
+ * option:
+ *
+ * pio <--> dma border.
+ */
+ int pio_dma_border; /* default is 64byte */
+
+ u32 type;
+ u32 enable_gpio;
+
+ /*
+ * option:
+ */
+ u32 has_otg:1; /* for controlling PWEN/EXTLP */
+ u32 has_sudmac:1; /* for SUDMAC */
+ u32 has_usb_dmac:1; /* for USB-DMAC */
+#define USBHS_USB_DMAC_XFER_SIZE 32 /* hardcode the xfer size */
+};
+
+#define USBHS_TYPE_R8A7790 1
+#define USBHS_TYPE_R8A7791 2
+
+/*
+ * option:
+ *
+ * platform information for renesas_usbhs driver.
+ */
+struct renesas_usbhs_platform_info {
+ /*
+ * option:
+ *
+ * platform set these functions before
+ * call platform_add_devices if needed
+ */
+ struct renesas_usbhs_platform_callback platform_callback;
+
+ /*
+ * driver set these callback functions pointer.
+ * platform can use it on callback functions
+ */
+ struct renesas_usbhs_driver_callback driver_callback;
+
+ /*
+ * option:
+ *
+ * driver use these param for some register
+ */
+ struct renesas_usbhs_driver_param driver_param;
+};
+
+/*
+ * macro for platform
+ */
+#define renesas_usbhs_get_info(pdev)\
+ ((struct renesas_usbhs_platform_info *)(pdev)->dev.platform_data)
+
+#define renesas_usbhs_call_notify_hotplug(pdev) \
+ ({ \
+ struct renesas_usbhs_driver_callback *dc; \
+ dc = &(renesas_usbhs_get_info(pdev)->driver_callback); \
+ if (dc && dc->notify_hotplug) \
+ dc->notify_hotplug(pdev); \
+ })
+#endif /* RENESAS_USB_H */
diff --git a/kernel/include/linux/usb/rndis_host.h b/kernel/include/linux/usb/rndis_host.h
new file mode 100644
index 000000000..d44ef85db
--- /dev/null
+++ b/kernel/include/linux/usb/rndis_host.h
@@ -0,0 +1,210 @@
+/*
+ * Host Side support for RNDIS Networking Links
+ * Copyright (C) 2005 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_USB_RNDIS_HOST_H
+#define __LINUX_USB_RNDIS_HOST_H
+
+#include <linux/rndis.h>
+
+/*
+ * CONTROL uses CDC "encapsulated commands" with funky notifications.
+ * - control-out: SEND_ENCAPSULATED
+ * - interrupt-in: RESPONSE_AVAILABLE
+ * - control-in: GET_ENCAPSULATED
+ *
+ * We'll try to ignore the RESPONSE_AVAILABLE notifications.
+ *
+ * REVISIT some RNDIS implementations seem to have curious issues still
+ * to be resolved.
+ */
+struct rndis_msg_hdr {
+ __le32 msg_type; /* RNDIS_MSG_* */
+ __le32 msg_len;
+ /* followed by data that varies between messages */
+ __le32 request_id;
+ __le32 status;
+ /* ... and more */
+} __attribute__ ((packed));
+
+/* MS-Windows uses this strange size, but RNDIS spec says 1024 minimum */
+#define CONTROL_BUFFER_SIZE 1025
+
+/* RNDIS defines an (absurdly huge) 10 second control timeout,
+ * but ActiveSync seems to use a more usual 5 second timeout
+ * (which matches the USB 2.0 spec).
+ */
+#define RNDIS_CONTROL_TIMEOUT_MS (5 * 1000)
+
+struct rndis_data_hdr {
+ __le32 msg_type; /* RNDIS_MSG_PACKET */
+ __le32 msg_len; /* rndis_data_hdr + data_len + pad */
+ __le32 data_offset; /* 36 -- right after header */
+ __le32 data_len; /* ... real packet size */
+
+ __le32 oob_data_offset; /* zero */
+ __le32 oob_data_len; /* zero */
+ __le32 num_oob; /* zero */
+ __le32 packet_data_offset; /* zero */
+
+ __le32 packet_data_len; /* zero */
+ __le32 vc_handle; /* zero */
+ __le32 reserved; /* zero */
+} __attribute__ ((packed));
+
+struct rndis_init { /* OUT */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_INIT */
+ __le32 msg_len; /* 24 */
+ __le32 request_id;
+ __le32 major_version; /* of rndis (1.0) */
+ __le32 minor_version;
+ __le32 max_transfer_size;
+} __attribute__ ((packed));
+
+struct rndis_init_c { /* IN */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_INIT_C */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 status;
+ __le32 major_version; /* of rndis (1.0) */
+ __le32 minor_version;
+ __le32 device_flags;
+ __le32 medium; /* zero == 802.3 */
+ __le32 max_packets_per_message;
+ __le32 max_transfer_size;
+ __le32 packet_alignment; /* max 7; (1<<n) bytes */
+ __le32 af_list_offset; /* zero */
+ __le32 af_list_size; /* zero */
+} __attribute__ ((packed));
+
+struct rndis_halt { /* OUT (no reply) */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_HALT */
+ __le32 msg_len;
+ __le32 request_id;
+} __attribute__ ((packed));
+
+struct rndis_query { /* OUT */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_QUERY */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 oid;
+ __le32 len;
+ __le32 offset;
+/*?*/ __le32 handle; /* zero */
+} __attribute__ ((packed));
+
+struct rndis_query_c { /* IN */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_QUERY_C */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 status;
+ __le32 len;
+ __le32 offset;
+} __attribute__ ((packed));
+
+struct rndis_set { /* OUT */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_SET */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 oid;
+ __le32 len;
+ __le32 offset;
+/*?*/ __le32 handle; /* zero */
+} __attribute__ ((packed));
+
+struct rndis_set_c { /* IN */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_SET_C */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 status;
+} __attribute__ ((packed));
+
+struct rndis_reset { /* IN */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_RESET */
+ __le32 msg_len;
+ __le32 reserved;
+} __attribute__ ((packed));
+
+struct rndis_reset_c { /* OUT */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_RESET_C */
+ __le32 msg_len;
+ __le32 status;
+ __le32 addressing_lost;
+} __attribute__ ((packed));
+
+struct rndis_indicate { /* IN (unrequested) */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_INDICATE */
+ __le32 msg_len;
+ __le32 status;
+ __le32 length;
+ __le32 offset;
+/**/ __le32 diag_status;
+ __le32 error_offset;
+/**/ __le32 message;
+} __attribute__ ((packed));
+
+struct rndis_keepalive { /* OUT (optionally IN) */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_KEEPALIVE */
+ __le32 msg_len;
+ __le32 request_id;
+} __attribute__ ((packed));
+
+struct rndis_keepalive_c { /* IN (optionally OUT) */
+ /* header and: */
+ __le32 msg_type; /* RNDIS_MSG_KEEPALIVE_C */
+ __le32 msg_len;
+ __le32 request_id;
+ __le32 status;
+} __attribute__ ((packed));
+
+/* default filter used with RNDIS devices */
+#define RNDIS_DEFAULT_FILTER ( \
+ RNDIS_PACKET_TYPE_DIRECTED | \
+ RNDIS_PACKET_TYPE_BROADCAST | \
+ RNDIS_PACKET_TYPE_ALL_MULTICAST | \
+ RNDIS_PACKET_TYPE_PROMISCUOUS)
+
+/* Flags to require specific physical medium type for generic_rndis_bind() */
+#define FLAG_RNDIS_PHYM_NOT_WIRELESS 0x0001
+#define FLAG_RNDIS_PHYM_WIRELESS 0x0002
+
+/* Flags for driver_info::data */
+#define RNDIS_DRIVER_DATA_POLL_STATUS 1 /* poll status before control */
+
+extern void rndis_status(struct usbnet *dev, struct urb *urb);
+extern int
+rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen);
+extern int
+generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags);
+extern void rndis_unbind(struct usbnet *dev, struct usb_interface *intf);
+extern int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb);
+extern struct sk_buff *
+rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags);
+
+#endif /* __LINUX_USB_RNDIS_HOST_H */
diff --git a/kernel/include/linux/usb/samsung_usb_phy.h b/kernel/include/linux/usb/samsung_usb_phy.h
new file mode 100644
index 000000000..916782699
--- /dev/null
+++ b/kernel/include/linux/usb/samsung_usb_phy.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * http://www.samsung.com/
+ *
+ * Defines phy types for samsung usb phy controllers - HOST or DEIVCE.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+enum samsung_usb_phy_type {
+ USB_PHY_TYPE_DEVICE,
+ USB_PHY_TYPE_HOST,
+};
diff --git a/kernel/include/linux/usb/serial.h b/kernel/include/linux/usb/serial.h
new file mode 100644
index 000000000..704a1ab82
--- /dev/null
+++ b/kernel/include/linux/usb/serial.h
@@ -0,0 +1,414 @@
+/*
+ * USB Serial Converter stuff
+ *
+ * Copyright (C) 1999 - 2012
+ * Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ */
+
+#ifndef __LINUX_USB_SERIAL_H
+#define __LINUX_USB_SERIAL_H
+
+#include <linux/kref.h>
+#include <linux/mutex.h>
+#include <linux/serial.h>
+#include <linux/sysrq.h>
+#include <linux/kfifo.h>
+
+/* The maximum number of ports one device can grab at once */
+#define MAX_NUM_PORTS 8
+
+/* parity check flag */
+#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+/* USB serial flags */
+#define USB_SERIAL_WRITE_BUSY 0
+
+/**
+ * usb_serial_port: structure for the specific ports of a device.
+ * @serial: pointer back to the struct usb_serial owner of this port.
+ * @port: pointer to the corresponding tty_port for this port.
+ * @lock: spinlock to grab when updating portions of this structure.
+ * @minor: the minor number of the port
+ * @port_number: the struct usb_serial port number of this port (starts at 0)
+ * @interrupt_in_buffer: pointer to the interrupt in buffer for this port.
+ * @interrupt_in_urb: pointer to the interrupt in struct urb for this port.
+ * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe
+ * for this port.
+ * @interrupt_out_buffer: pointer to the interrupt out buffer for this port.
+ * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes.
+ * @interrupt_out_urb: pointer to the interrupt out struct urb for this port.
+ * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe
+ * for this port.
+ * @bulk_in_buffer: pointer to the bulk in buffer for this port.
+ * @bulk_in_size: the size of the bulk_in_buffer, in bytes.
+ * @read_urb: pointer to the bulk in struct urb for this port.
+ * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
+ * port.
+ * @bulk_in_buffers: pointers to the bulk in buffers for this port
+ * @read_urbs: pointers to the bulk in urbs for this port
+ * @read_urbs_free: status bitmap the for bulk in urbs
+ * @bulk_out_buffer: pointer to the bulk out buffer for this port.
+ * @bulk_out_size: the size of the bulk_out_buffer, in bytes.
+ * @write_urb: pointer to the bulk out struct urb for this port.
+ * @write_fifo: kfifo used to buffer outgoing data
+ * @bulk_out_buffers: pointers to the bulk out buffers for this port
+ * @write_urbs: pointers to the bulk out urbs for this port
+ * @write_urbs_free: status bitmap the for bulk out urbs
+ * @icount: interrupt counters
+ * @tx_bytes: number of bytes currently in host stack queues
+ * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
+ * port.
+ * @flags: usb serial port flags
+ * @write_wait: a wait_queue_head_t used by the port.
+ * @work: work queue entry for the line discipline waking up.
+ * @throttled: nonzero if the read urb is inactive to throttle the device
+ * @throttle_req: nonzero if the tty wants to throttle us
+ * @dev: pointer to the serial device
+ *
+ * This structure is used by the usb-serial core and drivers for the specific
+ * ports of a device.
+ */
+struct usb_serial_port {
+ struct usb_serial *serial;
+ struct tty_port port;
+ spinlock_t lock;
+ u32 minor;
+ u8 port_number;
+
+ unsigned char *interrupt_in_buffer;
+ struct urb *interrupt_in_urb;
+ __u8 interrupt_in_endpointAddress;
+
+ unsigned char *interrupt_out_buffer;
+ int interrupt_out_size;
+ struct urb *interrupt_out_urb;
+ __u8 interrupt_out_endpointAddress;
+
+ unsigned char *bulk_in_buffer;
+ int bulk_in_size;
+ struct urb *read_urb;
+ __u8 bulk_in_endpointAddress;
+
+ unsigned char *bulk_in_buffers[2];
+ struct urb *read_urbs[2];
+ unsigned long read_urbs_free;
+
+ unsigned char *bulk_out_buffer;
+ int bulk_out_size;
+ struct urb *write_urb;
+ struct kfifo write_fifo;
+
+ unsigned char *bulk_out_buffers[2];
+ struct urb *write_urbs[2];
+ unsigned long write_urbs_free;
+ __u8 bulk_out_endpointAddress;
+
+ struct async_icount icount;
+ int tx_bytes;
+
+ unsigned long flags;
+ wait_queue_head_t write_wait;
+ struct work_struct work;
+ char throttled;
+ char throttle_req;
+ unsigned long sysrq; /* sysrq timeout */
+ struct device dev;
+};
+#define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev)
+
+/* get and set the port private data pointer helper functions */
+static inline void *usb_get_serial_port_data(struct usb_serial_port *port)
+{
+ return dev_get_drvdata(&port->dev);
+}
+
+static inline void usb_set_serial_port_data(struct usb_serial_port *port,
+ void *data)
+{
+ dev_set_drvdata(&port->dev, data);
+}
+
+/**
+ * usb_serial - structure used by the usb-serial core for a device
+ * @dev: pointer to the struct usb_device for this device
+ * @type: pointer to the struct usb_serial_driver for this device
+ * @interface: pointer to the struct usb_interface for this device
+ * @num_ports: the number of ports this device has
+ * @num_interrupt_in: number of interrupt in endpoints we have
+ * @num_interrupt_out: number of interrupt out endpoints we have
+ * @num_bulk_in: number of bulk in endpoints we have
+ * @num_bulk_out: number of bulk out endpoints we have
+ * @port: array of struct usb_serial_port structures for the different ports.
+ * @private: place to put any driver specific information that is needed. The
+ * usb-serial driver is required to manage this data, the usb-serial core
+ * will not touch this. Use usb_get_serial_data() and
+ * usb_set_serial_data() to access this.
+ */
+struct usb_serial {
+ struct usb_device *dev;
+ struct usb_serial_driver *type;
+ struct usb_interface *interface;
+ unsigned char disconnected:1;
+ unsigned char suspending:1;
+ unsigned char attached:1;
+ unsigned char minors_reserved:1;
+ unsigned char num_ports;
+ unsigned char num_port_pointers;
+ char num_interrupt_in;
+ char num_interrupt_out;
+ char num_bulk_in;
+ char num_bulk_out;
+ struct usb_serial_port *port[MAX_NUM_PORTS];
+ struct kref kref;
+ struct mutex disc_mutex;
+ void *private;
+};
+#define to_usb_serial(d) container_of(d, struct usb_serial, kref)
+
+/* get and set the serial private data pointer helper functions */
+static inline void *usb_get_serial_data(struct usb_serial *serial)
+{
+ return serial->private;
+}
+
+static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
+{
+ serial->private = data;
+}
+
+/**
+ * usb_serial_driver - describes a usb serial driver
+ * @description: pointer to a string that describes this driver. This string
+ * used in the syslog messages when a device is inserted or removed.
+ * @id_table: pointer to a list of usb_device_id structures that define all
+ * of the devices this structure can support.
+ * @num_ports: the number of different ports this device will have.
+ * @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer
+ * (0 = end-point size)
+ * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size)
+ * @calc_num_ports: pointer to a function to determine how many ports this
+ * device has dynamically. It will be called after the probe()
+ * callback is called, but before attach()
+ * @probe: pointer to the driver's probe function.
+ * This will be called when the device is inserted into the system,
+ * but before the device has been fully initialized by the usb_serial
+ * subsystem. Use this function to download any firmware to the device,
+ * or any other early initialization that might be needed.
+ * Return 0 to continue on with the initialization sequence. Anything
+ * else will abort it.
+ * @attach: pointer to the driver's attach function.
+ * This will be called when the struct usb_serial structure is fully set
+ * set up. Do any local initialization of the device, or any private
+ * memory structure allocation at this point in time.
+ * @disconnect: pointer to the driver's disconnect function. This will be
+ * called when the device is unplugged or unbound from the driver.
+ * @release: pointer to the driver's release function. This will be called
+ * when the usb_serial data structure is about to be destroyed.
+ * @usb_driver: pointer to the struct usb_driver that controls this
+ * device. This is necessary to allow dynamic ids to be added to
+ * the driver from sysfs.
+ *
+ * This structure is defines a USB Serial driver. It provides all of
+ * the information that the USB serial core code needs. If the function
+ * pointers are defined, then the USB serial core code will call them when
+ * the corresponding tty port functions are called. If they are not
+ * called, the generic serial function will be used instead.
+ *
+ * The driver.owner field should be set to the module owner of this driver.
+ * The driver.name field should be set to the name of this driver (remember
+ * it will show up in sysfs, so it needs to be short and to the point.
+ * Using the module name is a good idea.)
+ */
+struct usb_serial_driver {
+ const char *description;
+ const struct usb_device_id *id_table;
+ char num_ports;
+
+ struct list_head driver_list;
+ struct device_driver driver;
+ struct usb_driver *usb_driver;
+ struct usb_dynids dynids;
+
+ size_t bulk_in_size;
+ size_t bulk_out_size;
+
+ int (*probe)(struct usb_serial *serial, const struct usb_device_id *id);
+ int (*attach)(struct usb_serial *serial);
+ int (*calc_num_ports) (struct usb_serial *serial);
+
+ void (*disconnect)(struct usb_serial *serial);
+ void (*release)(struct usb_serial *serial);
+
+ int (*port_probe)(struct usb_serial_port *port);
+ int (*port_remove)(struct usb_serial_port *port);
+
+ int (*suspend)(struct usb_serial *serial, pm_message_t message);
+ int (*resume)(struct usb_serial *serial);
+ int (*reset_resume)(struct usb_serial *serial);
+
+ /* serial function calls */
+ /* Called by console and by the tty layer */
+ int (*open)(struct tty_struct *tty, struct usb_serial_port *port);
+ void (*close)(struct usb_serial_port *port);
+ int (*write)(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *buf, int count);
+ /* Called only by the tty layer */
+ int (*write_room)(struct tty_struct *tty);
+ int (*ioctl)(struct tty_struct *tty,
+ unsigned int cmd, unsigned long arg);
+ void (*set_termios)(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old);
+ void (*break_ctl)(struct tty_struct *tty, int break_state);
+ int (*chars_in_buffer)(struct tty_struct *tty);
+ void (*wait_until_sent)(struct tty_struct *tty, long timeout);
+ bool (*tx_empty)(struct usb_serial_port *port);
+ void (*throttle)(struct tty_struct *tty);
+ void (*unthrottle)(struct tty_struct *tty);
+ int (*tiocmget)(struct tty_struct *tty);
+ int (*tiocmset)(struct tty_struct *tty,
+ unsigned int set, unsigned int clear);
+ int (*tiocmiwait)(struct tty_struct *tty, unsigned long arg);
+ int (*get_icount)(struct tty_struct *tty,
+ struct serial_icounter_struct *icount);
+ /* Called by the tty layer for port level work. There may or may not
+ be an attached tty at this point */
+ void (*dtr_rts)(struct usb_serial_port *port, int on);
+ int (*carrier_raised)(struct usb_serial_port *port);
+ /* Called by the usb serial hooks to allow the user to rework the
+ termios state */
+ void (*init_termios)(struct tty_struct *tty);
+ /* USB events */
+ void (*read_int_callback)(struct urb *urb);
+ void (*write_int_callback)(struct urb *urb);
+ void (*read_bulk_callback)(struct urb *urb);
+ void (*write_bulk_callback)(struct urb *urb);
+ /* Called by the generic read bulk callback */
+ void (*process_read_urb)(struct urb *urb);
+ /* Called by the generic write implementation */
+ int (*prepare_write_buffer)(struct usb_serial_port *port,
+ void *dest, size_t size);
+};
+#define to_usb_serial_driver(d) \
+ container_of(d, struct usb_serial_driver, driver)
+
+extern int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[],
+ const char *name, const struct usb_device_id *id_table);
+extern void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_drivers[]);
+extern void usb_serial_port_softint(struct usb_serial_port *port);
+
+extern int usb_serial_suspend(struct usb_interface *intf, pm_message_t message);
+extern int usb_serial_resume(struct usb_interface *intf);
+
+/* USB Serial console functions */
+#ifdef CONFIG_USB_SERIAL_CONSOLE
+extern void usb_serial_console_init(int minor);
+extern void usb_serial_console_exit(void);
+extern void usb_serial_console_disconnect(struct usb_serial *serial);
+#else
+static inline void usb_serial_console_init(int minor) { }
+static inline void usb_serial_console_exit(void) { }
+static inline void usb_serial_console_disconnect(struct usb_serial *serial) {}
+#endif
+
+/* Functions needed by other parts of the usbserial core */
+extern struct usb_serial_port *usb_serial_port_get_by_minor(unsigned int minor);
+extern void usb_serial_put(struct usb_serial *serial);
+extern int usb_serial_generic_open(struct tty_struct *tty,
+ struct usb_serial_port *port);
+extern int usb_serial_generic_write_start(struct usb_serial_port *port,
+ gfp_t mem_flags);
+extern int usb_serial_generic_write(struct tty_struct *tty,
+ struct usb_serial_port *port, const unsigned char *buf, int count);
+extern void usb_serial_generic_close(struct usb_serial_port *port);
+extern int usb_serial_generic_resume(struct usb_serial *serial);
+extern int usb_serial_generic_write_room(struct tty_struct *tty);
+extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty);
+extern void usb_serial_generic_wait_until_sent(struct tty_struct *tty,
+ long timeout);
+extern void usb_serial_generic_read_bulk_callback(struct urb *urb);
+extern void usb_serial_generic_write_bulk_callback(struct urb *urb);
+extern void usb_serial_generic_throttle(struct tty_struct *tty);
+extern void usb_serial_generic_unthrottle(struct tty_struct *tty);
+extern int usb_serial_generic_tiocmiwait(struct tty_struct *tty,
+ unsigned long arg);
+extern int usb_serial_generic_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount);
+extern int usb_serial_generic_register(void);
+extern void usb_serial_generic_deregister(void);
+extern int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port,
+ gfp_t mem_flags);
+extern void usb_serial_generic_process_read_urb(struct urb *urb);
+extern int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port,
+ void *dest, size_t size);
+extern int usb_serial_handle_sysrq_char(struct usb_serial_port *port,
+ unsigned int ch);
+extern int usb_serial_handle_break(struct usb_serial_port *port);
+extern void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port,
+ struct tty_struct *tty,
+ unsigned int status);
+
+
+extern int usb_serial_bus_register(struct usb_serial_driver *device);
+extern void usb_serial_bus_deregister(struct usb_serial_driver *device);
+
+extern struct usb_serial_driver usb_serial_generic_device;
+extern struct bus_type usb_serial_bus_type;
+extern struct tty_driver *usb_serial_tty_driver;
+
+static inline void usb_serial_debug_data(struct device *dev,
+ const char *function, int size,
+ const unsigned char *data)
+{
+ dev_dbg(dev, "%s - length = %d, data = %*ph\n",
+ function, size, size, data);
+}
+
+/*
+ * Macro for reporting errors in write path to avoid inifinite loop
+ * when port is used as a console.
+ */
+#define dev_err_console(usport, fmt, ...) \
+do { \
+ static bool __print_once; \
+ struct usb_serial_port *__port = (usport); \
+ \
+ if (!__port->port.console || !__print_once) { \
+ __print_once = true; \
+ dev_err(&__port->dev, fmt, ##__VA_ARGS__); \
+ } \
+} while (0)
+
+/*
+ * module_usb_serial_driver() - Helper macro for registering a USB Serial driver
+ * @__serial_drivers: list of usb_serial drivers to register
+ * @__ids: all device ids that @__serial_drivers bind to
+ *
+ * Helper macro for USB serial drivers which do not do anything special
+ * in module init/exit. This eliminates a lot of boilerplate. Each
+ * module may only use this macro once, and calling it replaces
+ * module_init() and module_exit()
+ *
+ */
+#define usb_serial_module_driver(__name, __serial_drivers, __ids) \
+static int __init usb_serial_module_init(void) \
+{ \
+ return usb_serial_register_drivers(__serial_drivers, \
+ __name, __ids); \
+} \
+module_init(usb_serial_module_init); \
+static void __exit usb_serial_module_exit(void) \
+{ \
+ usb_serial_deregister_drivers(__serial_drivers); \
+} \
+module_exit(usb_serial_module_exit);
+
+#define module_usb_serial_driver(__serial_drivers, __ids) \
+ usb_serial_module_driver(KBUILD_MODNAME, __serial_drivers, __ids)
+
+#endif /* __LINUX_USB_SERIAL_H */
+
diff --git a/kernel/include/linux/usb/sl811.h b/kernel/include/linux/usb/sl811.h
new file mode 100644
index 000000000..3afe4d16f
--- /dev/null
+++ b/kernel/include/linux/usb/sl811.h
@@ -0,0 +1,29 @@
+/*
+ * board initialization should put one of these into dev->platform_data
+ * and place the sl811hs onto platform_bus named "sl811-hcd".
+ */
+
+#ifndef __LINUX_USB_SL811_H
+#define __LINUX_USB_SL811_H
+
+struct sl811_platform_data {
+ unsigned can_wakeup:1;
+
+ /* given port_power, msec/2 after power on till power good */
+ u8 potpg;
+
+ /* mA/2 power supplied on this port (max = default = 250) */
+ u8 power;
+
+ /* sl811 relies on an external source of VBUS current */
+ void (*port_power)(struct device *dev, int is_on);
+
+ /* pulse sl811 nRST (probably with a GPIO) */
+ void (*reset)(struct device *dev);
+
+ /* some boards need something like these: */
+ /* int (*check_overcurrent)(struct device *dev); */
+ /* void (*clock_enable)(struct device *dev, int is_on); */
+};
+
+#endif /* __LINUX_USB_SL811_H */
diff --git a/kernel/include/linux/usb/storage.h b/kernel/include/linux/usb/storage.h
new file mode 100644
index 000000000..cb33fff2b
--- /dev/null
+++ b/kernel/include/linux/usb/storage.h
@@ -0,0 +1,86 @@
+#ifndef __LINUX_USB_STORAGE_H
+#define __LINUX_USB_STORAGE_H
+
+/*
+ * linux/usb/storage.h
+ *
+ * Copyright Matthew Wilcox for Intel Corp, 2010
+ *
+ * This file contains definitions taken from the
+ * USB Mass Storage Class Specification Overview
+ *
+ * Distributed under the terms of the GNU GPL, version two.
+ */
+
+/* Storage subclass codes */
+
+#define USB_SC_RBC 0x01 /* Typically, flash devices */
+#define USB_SC_8020 0x02 /* CD-ROM */
+#define USB_SC_QIC 0x03 /* QIC-157 Tapes */
+#define USB_SC_UFI 0x04 /* Floppy */
+#define USB_SC_8070 0x05 /* Removable media */
+#define USB_SC_SCSI 0x06 /* Transparent */
+#define USB_SC_LOCKABLE 0x07 /* Password-protected */
+
+#define USB_SC_ISD200 0xf0 /* ISD200 ATA */
+#define USB_SC_CYP_ATACB 0xf1 /* Cypress ATACB */
+#define USB_SC_DEVICE 0xff /* Use device's value */
+
+/* Storage protocol codes */
+
+#define USB_PR_CBI 0x00 /* Control/Bulk/Interrupt */
+#define USB_PR_CB 0x01 /* Control/Bulk w/o interrupt */
+#define USB_PR_BULK 0x50 /* bulk only */
+#define USB_PR_UAS 0x62 /* USB Attached SCSI */
+
+#define USB_PR_USBAT 0x80 /* SCM-ATAPI bridge */
+#define USB_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */
+#define USB_PR_SDDR55 0x82 /* SDDR-55 (made up) */
+#define USB_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */
+#define USB_PR_FREECOM 0xf1 /* Freecom */
+#define USB_PR_DATAFAB 0xf2 /* Datafab chipsets */
+#define USB_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */
+#define USB_PR_ALAUDA 0xf4 /* Alauda chipsets */
+#define USB_PR_KARMA 0xf5 /* Rio Karma */
+
+#define USB_PR_DEVICE 0xff /* Use device's value */
+
+ /*
+ * Bulk only data structures
+ */
+
+/* command block wrapper */
+struct bulk_cb_wrap {
+ __le32 Signature; /* contains 'USBC' */
+ __u32 Tag; /* unique per command id */
+ __le32 DataTransferLength; /* size of data */
+ __u8 Flags; /* direction in bit 0 */
+ __u8 Lun; /* LUN normally 0 */
+ __u8 Length; /* of of the CDB */
+ __u8 CDB[16]; /* max command */
+};
+
+#define US_BULK_CB_WRAP_LEN 31
+#define US_BULK_CB_SIGN 0x43425355 /*spells out USBC */
+#define US_BULK_FLAG_IN (1 << 7)
+#define US_BULK_FLAG_OUT 0
+
+/* command status wrapper */
+struct bulk_cs_wrap {
+ __le32 Signature; /* should = 'USBS' */
+ __u32 Tag; /* same as original command */
+ __le32 Residue; /* amount not transferred */
+ __u8 Status; /* see below */
+};
+
+#define US_BULK_CS_WRAP_LEN 13
+#define US_BULK_CS_SIGN 0x53425355 /* spells out 'USBS' */
+#define US_BULK_STAT_OK 0
+#define US_BULK_STAT_FAIL 1
+#define US_BULK_STAT_PHASE 2
+
+/* bulk-only class specific requests */
+#define US_BULK_RESET_REQUEST 0xff
+#define US_BULK_GET_MAX_LUN 0xfe
+
+#endif
diff --git a/kernel/include/linux/usb/tegra_usb_phy.h b/kernel/include/linux/usb/tegra_usb_phy.h
new file mode 100644
index 000000000..1de16c324
--- /dev/null
+++ b/kernel/include/linux/usb/tegra_usb_phy.h
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __TEGRA_USB_PHY_H
+#define __TEGRA_USB_PHY_H
+
+#include <linux/clk.h>
+#include <linux/usb/otg.h>
+
+/*
+ * utmi_pll_config_in_car_module: true if the UTMI PLL configuration registers
+ * should be set up by clk-tegra, false if by the PHY code
+ * has_hostpc: true if the USB controller has the HOSTPC extension, which
+ * changes the location of the PHCD and PTS fields
+ * requires_usbmode_setup: true if the USBMODE register needs to be set to
+ * enter host mode
+ * requires_extra_tuning_parameters: true if xcvr_hsslew, hssquelch_level
+ * and hsdiscon_level should be set for adequate signal quality
+ */
+
+struct tegra_phy_soc_config {
+ bool utmi_pll_config_in_car_module;
+ bool has_hostpc;
+ bool requires_usbmode_setup;
+ bool requires_extra_tuning_parameters;
+};
+
+struct tegra_utmip_config {
+ u8 hssync_start_delay;
+ u8 elastic_limit;
+ u8 idle_wait_delay;
+ u8 term_range_adj;
+ bool xcvr_setup_use_fuses;
+ u8 xcvr_setup;
+ u8 xcvr_lsfslew;
+ u8 xcvr_lsrslew;
+ u8 xcvr_hsslew;
+ u8 hssquelch_level;
+ u8 hsdiscon_level;
+};
+
+enum tegra_usb_phy_port_speed {
+ TEGRA_USB_PHY_PORT_SPEED_FULL = 0,
+ TEGRA_USB_PHY_PORT_SPEED_LOW,
+ TEGRA_USB_PHY_PORT_SPEED_HIGH,
+};
+
+struct tegra_xtal_freq;
+
+struct tegra_usb_phy {
+ int instance;
+ const struct tegra_xtal_freq *freq;
+ void __iomem *regs;
+ void __iomem *pad_regs;
+ struct clk *clk;
+ struct clk *pll_u;
+ struct clk *pad_clk;
+ struct regulator *vbus;
+ enum usb_dr_mode mode;
+ void *config;
+ const struct tegra_phy_soc_config *soc_config;
+ struct usb_phy *ulpi;
+ struct usb_phy u_phy;
+ bool is_legacy_phy;
+ bool is_ulpi_phy;
+ int reset_gpio;
+};
+
+void tegra_usb_phy_preresume(struct usb_phy *phy);
+
+void tegra_usb_phy_postresume(struct usb_phy *phy);
+
+void tegra_ehci_phy_restore_start(struct usb_phy *phy,
+ enum tegra_usb_phy_port_speed port_speed);
+
+void tegra_ehci_phy_restore_end(struct usb_phy *phy);
+
+#endif /* __TEGRA_USB_PHY_H */
diff --git a/kernel/include/linux/usb/tilegx.h b/kernel/include/linux/usb/tilegx.h
new file mode 100644
index 000000000..2d65e3435
--- /dev/null
+++ b/kernel/include/linux/usb/tilegx.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * Structure to contain platform-specific data related to Tile-Gx USB
+ * controllers.
+ */
+
+#ifndef _LINUX_USB_TILEGX_H
+#define _LINUX_USB_TILEGX_H
+
+#include <gxio/usb_host.h>
+
+struct tilegx_usb_platform_data {
+ /* GXIO device index. */
+ int dev_index;
+
+ /* GXIO device context. */
+ gxio_usb_host_context_t usb_ctx;
+
+ /* Device IRQ. */
+ unsigned int irq;
+};
+
+#endif /* _LINUX_USB_TILEGX_H */
diff --git a/kernel/include/linux/usb/uas.h b/kernel/include/linux/usb/uas.h
new file mode 100644
index 000000000..3fc8e8b9f
--- /dev/null
+++ b/kernel/include/linux/usb/uas.h
@@ -0,0 +1,109 @@
+#ifndef __USB_UAS_H__
+#define __USB_UAS_H__
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+/* Common header for all IUs */
+struct iu {
+ __u8 iu_id;
+ __u8 rsvd1;
+ __be16 tag;
+} __attribute__((__packed__));
+
+enum {
+ IU_ID_COMMAND = 0x01,
+ IU_ID_STATUS = 0x03,
+ IU_ID_RESPONSE = 0x04,
+ IU_ID_TASK_MGMT = 0x05,
+ IU_ID_READ_READY = 0x06,
+ IU_ID_WRITE_READY = 0x07,
+};
+
+enum {
+ TMF_ABORT_TASK = 0x01,
+ TMF_ABORT_TASK_SET = 0x02,
+ TMF_CLEAR_TASK_SET = 0x04,
+ TMF_LOGICAL_UNIT_RESET = 0x08,
+ TMF_I_T_NEXUS_RESET = 0x10,
+ TMF_CLEAR_ACA = 0x40,
+ TMF_QUERY_TASK = 0x80,
+ TMF_QUERY_TASK_SET = 0x81,
+ TMF_QUERY_ASYNC_EVENT = 0x82,
+};
+
+enum {
+ RC_TMF_COMPLETE = 0x00,
+ RC_INVALID_INFO_UNIT = 0x02,
+ RC_TMF_NOT_SUPPORTED = 0x04,
+ RC_TMF_FAILED = 0x05,
+ RC_TMF_SUCCEEDED = 0x08,
+ RC_INCORRECT_LUN = 0x09,
+ RC_OVERLAPPED_TAG = 0x0a,
+};
+
+struct command_iu {
+ __u8 iu_id;
+ __u8 rsvd1;
+ __be16 tag;
+ __u8 prio_attr;
+ __u8 rsvd5;
+ __u8 len;
+ __u8 rsvd7;
+ struct scsi_lun lun;
+ __u8 cdb[16]; /* XXX: Overflow-checking tools may misunderstand */
+} __attribute__((__packed__));
+
+struct task_mgmt_iu {
+ __u8 iu_id;
+ __u8 rsvd1;
+ __be16 tag;
+ __u8 function;
+ __u8 rsvd2;
+ __be16 task_tag;
+ struct scsi_lun lun;
+} __attribute__((__packed__));
+
+/*
+ * Also used for the Read Ready and Write Ready IUs since they have the
+ * same first four bytes
+ */
+struct sense_iu {
+ __u8 iu_id;
+ __u8 rsvd1;
+ __be16 tag;
+ __be16 status_qual;
+ __u8 status;
+ __u8 rsvd7[7];
+ __be16 len;
+ __u8 sense[SCSI_SENSE_BUFFERSIZE];
+} __attribute__((__packed__));
+
+struct response_iu {
+ __u8 iu_id;
+ __u8 rsvd1;
+ __be16 tag;
+ __u8 add_response_info[3];
+ __u8 response_code;
+} __attribute__((__packed__));
+
+struct usb_pipe_usage_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bPipeID;
+ __u8 Reserved;
+} __attribute__((__packed__));
+
+enum {
+ CMD_PIPE_ID = 1,
+ STATUS_PIPE_ID = 2,
+ DATA_IN_PIPE_ID = 3,
+ DATA_OUT_PIPE_ID = 4,
+
+ UAS_SIMPLE_TAG = 0,
+ UAS_HEAD_TAG = 1,
+ UAS_ORDERED_TAG = 2,
+ UAS_ACA = 4,
+};
+#endif
diff --git a/kernel/include/linux/usb/ulpi.h b/kernel/include/linux/usb/ulpi.h
new file mode 100644
index 000000000..5c295c26a
--- /dev/null
+++ b/kernel/include/linux/usb/ulpi.h
@@ -0,0 +1,200 @@
+/*
+ * ulpi.h -- ULPI defines and function prorotypes
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * This software is distributed under the terms of the GNU General
+ * Public License ("GPL") as published by the Free Software Foundation,
+ * version 2 of that License.
+ */
+
+#ifndef __LINUX_USB_ULPI_H
+#define __LINUX_USB_ULPI_H
+
+#include <linux/usb/otg.h>
+/*-------------------------------------------------------------------------*/
+
+/*
+ * ULPI Flags
+ */
+#define ULPI_OTG_ID_PULLUP (1 << 0)
+#define ULPI_OTG_DP_PULLDOWN_DIS (1 << 1)
+#define ULPI_OTG_DM_PULLDOWN_DIS (1 << 2)
+#define ULPI_OTG_DISCHRGVBUS (1 << 3)
+#define ULPI_OTG_CHRGVBUS (1 << 4)
+#define ULPI_OTG_DRVVBUS (1 << 5)
+#define ULPI_OTG_DRVVBUS_EXT (1 << 6)
+#define ULPI_OTG_EXTVBUSIND (1 << 7)
+
+#define ULPI_IC_6PIN_SERIAL (1 << 8)
+#define ULPI_IC_3PIN_SERIAL (1 << 9)
+#define ULPI_IC_CARKIT (1 << 10)
+#define ULPI_IC_CLKSUSPM (1 << 11)
+#define ULPI_IC_AUTORESUME (1 << 12)
+#define ULPI_IC_EXTVBUS_INDINV (1 << 13)
+#define ULPI_IC_IND_PASSTHRU (1 << 14)
+#define ULPI_IC_PROTECT_DIS (1 << 15)
+
+#define ULPI_FC_HS (1 << 16)
+#define ULPI_FC_FS (1 << 17)
+#define ULPI_FC_LS (1 << 18)
+#define ULPI_FC_FS4LS (1 << 19)
+#define ULPI_FC_TERMSEL (1 << 20)
+#define ULPI_FC_OP_NORM (1 << 21)
+#define ULPI_FC_OP_NODRV (1 << 22)
+#define ULPI_FC_OP_DIS_NRZI (1 << 23)
+#define ULPI_FC_OP_NSYNC_NEOP (1 << 24)
+#define ULPI_FC_RST (1 << 25)
+#define ULPI_FC_SUSPM (1 << 26)
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Macros for Set and Clear
+ * See ULPI 1.1 specification to find the registers with Set and Clear offsets
+ */
+#define ULPI_SET(a) (a + 1)
+#define ULPI_CLR(a) (a + 2)
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Register Map
+ */
+#define ULPI_VENDOR_ID_LOW 0x00
+#define ULPI_VENDOR_ID_HIGH 0x01
+#define ULPI_PRODUCT_ID_LOW 0x02
+#define ULPI_PRODUCT_ID_HIGH 0x03
+#define ULPI_FUNC_CTRL 0x04
+#define ULPI_IFC_CTRL 0x07
+#define ULPI_OTG_CTRL 0x0a
+#define ULPI_USB_INT_EN_RISE 0x0d
+#define ULPI_USB_INT_EN_FALL 0x10
+#define ULPI_USB_INT_STS 0x13
+#define ULPI_USB_INT_LATCH 0x14
+#define ULPI_DEBUG 0x15
+#define ULPI_SCRATCH 0x16
+/* Optional Carkit Registers */
+#define ULPI_CARCIT_CTRL 0x19
+#define ULPI_CARCIT_INT_DELAY 0x1c
+#define ULPI_CARCIT_INT_EN 0x1d
+#define ULPI_CARCIT_INT_STS 0x20
+#define ULPI_CARCIT_INT_LATCH 0x21
+#define ULPI_CARCIT_PLS_CTRL 0x22
+/* Other Optional Registers */
+#define ULPI_TX_POS_WIDTH 0x25
+#define ULPI_TX_NEG_WIDTH 0x26
+#define ULPI_POLARITY_RECOVERY 0x27
+/* Access Extended Register Set */
+#define ULPI_ACCESS_EXTENDED 0x2f
+/* Vendor Specific */
+#define ULPI_VENDOR_SPECIFIC 0x30
+/* Extended Registers */
+#define ULPI_EXT_VENDOR_SPECIFIC 0x80
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Register Bits
+ */
+
+/* Function Control */
+#define ULPI_FUNC_CTRL_XCVRSEL (1 << 0)
+#define ULPI_FUNC_CTRL_XCVRSEL_MASK (3 << 0)
+#define ULPI_FUNC_CTRL_HIGH_SPEED (0 << 0)
+#define ULPI_FUNC_CTRL_FULL_SPEED (1 << 0)
+#define ULPI_FUNC_CTRL_LOW_SPEED (2 << 0)
+#define ULPI_FUNC_CTRL_FS4LS (3 << 0)
+#define ULPI_FUNC_CTRL_TERMSELECT (1 << 2)
+#define ULPI_FUNC_CTRL_OPMODE (1 << 3)
+#define ULPI_FUNC_CTRL_OPMODE_MASK (3 << 3)
+#define ULPI_FUNC_CTRL_OPMODE_NORMAL (0 << 3)
+#define ULPI_FUNC_CTRL_OPMODE_NONDRIVING (1 << 3)
+#define ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI (2 << 3)
+#define ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP (3 << 3)
+#define ULPI_FUNC_CTRL_RESET (1 << 5)
+#define ULPI_FUNC_CTRL_SUSPENDM (1 << 6)
+
+/* Interface Control */
+#define ULPI_IFC_CTRL_6_PIN_SERIAL_MODE (1 << 0)
+#define ULPI_IFC_CTRL_3_PIN_SERIAL_MODE (1 << 1)
+#define ULPI_IFC_CTRL_CARKITMODE (1 << 2)
+#define ULPI_IFC_CTRL_CLOCKSUSPENDM (1 << 3)
+#define ULPI_IFC_CTRL_AUTORESUME (1 << 4)
+#define ULPI_IFC_CTRL_EXTERNAL_VBUS (1 << 5)
+#define ULPI_IFC_CTRL_PASSTHRU (1 << 6)
+#define ULPI_IFC_CTRL_PROTECT_IFC_DISABLE (1 << 7)
+
+/* OTG Control */
+#define ULPI_OTG_CTRL_ID_PULLUP (1 << 0)
+#define ULPI_OTG_CTRL_DP_PULLDOWN (1 << 1)
+#define ULPI_OTG_CTRL_DM_PULLDOWN (1 << 2)
+#define ULPI_OTG_CTRL_DISCHRGVBUS (1 << 3)
+#define ULPI_OTG_CTRL_CHRGVBUS (1 << 4)
+#define ULPI_OTG_CTRL_DRVVBUS (1 << 5)
+#define ULPI_OTG_CTRL_DRVVBUS_EXT (1 << 6)
+#define ULPI_OTG_CTRL_EXTVBUSIND (1 << 7)
+
+/* USB Interrupt Enable Rising,
+ * USB Interrupt Enable Falling,
+ * USB Interrupt Status and
+ * USB Interrupt Latch
+ */
+#define ULPI_INT_HOST_DISCONNECT (1 << 0)
+#define ULPI_INT_VBUS_VALID (1 << 1)
+#define ULPI_INT_SESS_VALID (1 << 2)
+#define ULPI_INT_SESS_END (1 << 3)
+#define ULPI_INT_IDGRD (1 << 4)
+
+/* Debug */
+#define ULPI_DEBUG_LINESTATE0 (1 << 0)
+#define ULPI_DEBUG_LINESTATE1 (1 << 1)
+
+/* Carkit Control */
+#define ULPI_CARKIT_CTRL_CARKITPWR (1 << 0)
+#define ULPI_CARKIT_CTRL_IDGNDDRV (1 << 1)
+#define ULPI_CARKIT_CTRL_TXDEN (1 << 2)
+#define ULPI_CARKIT_CTRL_RXDEN (1 << 3)
+#define ULPI_CARKIT_CTRL_SPKLEFTEN (1 << 4)
+#define ULPI_CARKIT_CTRL_SPKRIGHTEN (1 << 5)
+#define ULPI_CARKIT_CTRL_MICEN (1 << 6)
+
+/* Carkit Interrupt Enable */
+#define ULPI_CARKIT_INT_EN_IDFLOAT_RISE (1 << 0)
+#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL (1 << 1)
+#define ULPI_CARKIT_INT_EN_CARINTDET (1 << 2)
+#define ULPI_CARKIT_INT_EN_DP_RISE (1 << 3)
+#define ULPI_CARKIT_INT_EN_DP_FALL (1 << 4)
+
+/* Carkit Interrupt Status and
+ * Carkit Interrupt Latch
+ */
+#define ULPI_CARKIT_INT_IDFLOAT (1 << 0)
+#define ULPI_CARKIT_INT_CARINTDET (1 << 1)
+#define ULPI_CARKIT_INT_DP (1 << 2)
+
+/* Carkit Pulse Control*/
+#define ULPI_CARKIT_PLS_CTRL_TXPLSEN (1 << 0)
+#define ULPI_CARKIT_PLS_CTRL_RXPLSEN (1 << 1)
+#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN (1 << 2)
+#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN (1 << 3)
+
+/*-------------------------------------------------------------------------*/
+
+#if IS_ENABLED(CONFIG_USB_ULPI)
+struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
+ unsigned int flags);
+#else
+static inline struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
+ unsigned int flags)
+{
+ return NULL;
+}
+#endif
+
+#ifdef CONFIG_USB_ULPI_VIEWPORT
+/* access ops for controllers with a viewport register */
+extern struct usb_phy_io_ops ulpi_viewport_access_ops;
+#endif
+
+#endif /* __LINUX_USB_ULPI_H */
diff --git a/kernel/include/linux/usb/usb338x.h b/kernel/include/linux/usb/usb338x.h
new file mode 100644
index 000000000..f92eb635b
--- /dev/null
+++ b/kernel/include/linux/usb/usb338x.h
@@ -0,0 +1,199 @@
+/*
+ * USB 338x super/high/full speed USB device controller.
+ * Unlike many such controllers, this one talks PCI.
+ *
+ * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
+ * Copyright (C) 2003 David Brownell
+ * Copyright (C) 2014 Ricardo Ribalda - Qtechnology/AS
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_USB_USB338X_H
+#define __LINUX_USB_USB338X_H
+
+#include <linux/usb/net2280.h>
+
+/*
+ * Extra defined bits for net2280 registers
+ */
+#define SCRATCH 0x0b
+
+#define DEFECT7374_FSM_FIELD 28
+#define SUPER_SPEED 8
+#define DMA_REQUEST_OUTSTANDING 5
+#define DMA_PAUSE_DONE_INTERRUPT 26
+#define SET_ISOCHRONOUS_DELAY 24
+#define SET_SEL 22
+#define SUPER_SPEED_MODE 8
+
+/*ep_cfg*/
+#define MAX_BURST_SIZE 24
+#define EP_FIFO_BYTE_COUNT 16
+#define IN_ENDPOINT_ENABLE 14
+#define IN_ENDPOINT_TYPE 12
+#define OUT_ENDPOINT_ENABLE 10
+#define OUT_ENDPOINT_TYPE 8
+
+struct usb338x_usb_ext_regs {
+ u32 usbclass;
+#define DEVICE_PROTOCOL 16
+#define DEVICE_SUB_CLASS 8
+#define DEVICE_CLASS 0
+ u32 ss_sel;
+#define U2_SYSTEM_EXIT_LATENCY 8
+#define U1_SYSTEM_EXIT_LATENCY 0
+ u32 ss_del;
+#define U2_DEVICE_EXIT_LATENCY 8
+#define U1_DEVICE_EXIT_LATENCY 0
+ u32 usb2lpm;
+#define USB_L1_LPM_HIRD 2
+#define USB_L1_LPM_REMOTE_WAKE 1
+#define USB_L1_LPM_SUPPORT 0
+ u32 usb3belt;
+#define BELT_MULTIPLIER 10
+#define BEST_EFFORT_LATENCY_TOLERANCE 0
+ u32 usbctl2;
+#define LTM_ENABLE 7
+#define U2_ENABLE 6
+#define U1_ENABLE 5
+#define FUNCTION_SUSPEND 4
+#define USB3_CORE_ENABLE 3
+#define USB2_CORE_ENABLE 2
+#define SERIAL_NUMBER_STRING_ENABLE 0
+ u32 in_timeout;
+#define GPEP3_TIMEOUT 19
+#define GPEP2_TIMEOUT 18
+#define GPEP1_TIMEOUT 17
+#define GPEP0_TIMEOUT 16
+#define GPEP3_TIMEOUT_VALUE 13
+#define GPEP3_TIMEOUT_ENABLE 12
+#define GPEP2_TIMEOUT_VALUE 9
+#define GPEP2_TIMEOUT_ENABLE 8
+#define GPEP1_TIMEOUT_VALUE 5
+#define GPEP1_TIMEOUT_ENABLE 4
+#define GPEP0_TIMEOUT_VALUE 1
+#define GPEP0_TIMEOUT_ENABLE 0
+ u32 isodelay;
+#define ISOCHRONOUS_DELAY 0
+} __packed;
+
+struct usb338x_fifo_regs {
+ /* offset 0x0500, 0x0520, 0x0540, 0x0560, 0x0580 */
+ u32 ep_fifo_size_base;
+#define IN_FIFO_BASE_ADDRESS 22
+#define IN_FIFO_SIZE 16
+#define OUT_FIFO_BASE_ADDRESS 6
+#define OUT_FIFO_SIZE 0
+ u32 ep_fifo_out_wrptr;
+ u32 ep_fifo_out_rdptr;
+ u32 ep_fifo_in_wrptr;
+ u32 ep_fifo_in_rdptr;
+ u32 unused[3];
+} __packed;
+
+
+/* Link layer */
+struct usb338x_ll_regs {
+ /* offset 0x700 */
+ u32 ll_ltssm_ctrl1;
+ u32 ll_ltssm_ctrl2;
+ u32 ll_ltssm_ctrl3;
+ u32 unused[2];
+ u32 ll_general_ctrl0;
+ u32 ll_general_ctrl1;
+#define PM_U3_AUTO_EXIT 29
+#define PM_U2_AUTO_EXIT 28
+#define PM_U1_AUTO_EXIT 27
+#define PM_FORCE_U2_ENTRY 26
+#define PM_FORCE_U1_ENTRY 25
+#define PM_LGO_COLLISION_SEND_LAU 24
+#define PM_DIR_LINK_REJECT 23
+#define PM_FORCE_LINK_ACCEPT 22
+#define PM_DIR_ENTRY_U3 20
+#define PM_DIR_ENTRY_U2 19
+#define PM_DIR_ENTRY_U1 18
+#define PM_U2_ENABLE 17
+#define PM_U1_ENABLE 16
+#define SKP_THRESHOLD_ADJUST_FMW 8
+#define RESEND_DPP_ON_LRTY_FMW 7
+#define DL_BIT_VALUE_FMW 6
+#define FORCE_DL_BIT 5
+ u32 ll_general_ctrl2;
+#define SELECT_INVERT_LANE_POLARITY 7
+#define FORCE_INVERT_LANE_POLARITY 6
+ u32 ll_general_ctrl3;
+ u32 ll_general_ctrl4;
+ u32 ll_error_gen;
+} __packed;
+
+struct usb338x_ll_lfps_regs {
+ /* offset 0x748 */
+ u32 ll_lfps_5;
+#define TIMER_LFPS_6US 16
+ u32 ll_lfps_6;
+#define TIMER_LFPS_80US 0
+} __packed;
+
+struct usb338x_ll_tsn_regs {
+ /* offset 0x77C */
+ u32 ll_tsn_counters_2;
+#define HOT_TX_NORESET_TS2 24
+ u32 ll_tsn_counters_3;
+#define HOT_RX_RESET_TS2 0
+} __packed;
+
+struct usb338x_ll_chi_regs {
+ /* offset 0x79C */
+ u32 ll_tsn_chicken_bit;
+#define RECOVERY_IDLE_TO_RECOVER_FMW 3
+} __packed;
+
+/* protocol layer */
+struct usb338x_pl_regs {
+ /* offset 0x800 */
+ u32 pl_reg_1;
+ u32 pl_reg_2;
+ u32 pl_reg_3;
+ u32 pl_reg_4;
+ u32 pl_ep_ctrl;
+ /* Protocol Layer Endpoint Control*/
+#define PL_EP_CTRL 0x810
+#define ENDPOINT_SELECT 0
+ /* [4:0] */
+#define EP_INITIALIZED 16
+#define SEQUENCE_NUMBER_RESET 17
+#define CLEAR_ACK_ERROR_CODE 20
+ u32 pl_reg_6;
+ u32 pl_reg_7;
+ u32 pl_reg_8;
+ u32 pl_ep_status_1;
+ /* Protocol Layer Endpoint Status 1*/
+#define PL_EP_STATUS_1 0x820
+#define STATE 16
+#define ACK_GOOD_NORMAL 0x11
+#define ACK_GOOD_MORE_ACKS_TO_COME 0x16
+ u32 pl_ep_status_2;
+ u32 pl_ep_status_3;
+ /* Protocol Layer Endpoint Status 3*/
+#define PL_EP_STATUS_3 0x828
+#define SEQUENCE_NUMBER 0
+ u32 pl_ep_status_4;
+ /* Protocol Layer Endpoint Status 4*/
+#define PL_EP_STATUS_4 0x82c
+ u32 pl_ep_cfg_4;
+ /* Protocol Layer Endpoint Configuration 4*/
+#define PL_EP_CFG_4 0x830
+#define NON_CTRL_IN_TOLERATE_BAD_DIR 6
+} __packed;
+
+#endif /* __LINUX_USB_USB338X_H */
diff --git a/kernel/include/linux/usb/usb_phy_generic.h b/kernel/include/linux/usb/usb_phy_generic.h
new file mode 100644
index 000000000..c13632d52
--- /dev/null
+++ b/kernel/include/linux/usb/usb_phy_generic.h
@@ -0,0 +1,33 @@
+#ifndef __LINUX_USB_NOP_XCEIV_H
+#define __LINUX_USB_NOP_XCEIV_H
+
+#include <linux/usb/otg.h>
+#include <linux/gpio/consumer.h>
+
+struct usb_phy_generic_platform_data {
+ enum usb_phy_type type;
+ unsigned long clk_rate;
+
+ /* if set fails with -EPROBE_DEFER if can't get regulator */
+ unsigned int needs_vcc:1;
+ unsigned int needs_reset:1; /* deprecated */
+ int gpio_reset;
+ struct gpio_desc *gpiod_vbus;
+};
+
+#if IS_ENABLED(CONFIG_NOP_USB_XCEIV)
+/* sometimes transceivers are accessed only through e.g. ULPI */
+extern struct platform_device *usb_phy_generic_register(void);
+extern void usb_phy_generic_unregister(struct platform_device *);
+#else
+static inline struct platform_device *usb_phy_generic_register(void)
+{
+ return NULL;
+}
+
+static inline void usb_phy_generic_unregister(struct platform_device *pdev)
+{
+}
+#endif
+
+#endif /* __LINUX_USB_NOP_XCEIV_H */
diff --git a/kernel/include/linux/usb/usbnet.h b/kernel/include/linux/usb/usbnet.h
new file mode 100644
index 000000000..6e0ce8c7b
--- /dev/null
+++ b/kernel/include/linux/usb/usbnet.h
@@ -0,0 +1,282 @@
+/*
+ * USB Networking Link Interface
+ *
+ * Copyright (C) 2000-2005 by David Brownell <dbrownell@users.sourceforge.net>
+ * Copyright (C) 2003-2005 David Hollis <dhollis@davehollis.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __LINUX_USB_USBNET_H
+#define __LINUX_USB_USBNET_H
+
+/* interface from usbnet core to each USB networking link we handle */
+struct usbnet {
+ /* housekeeping */
+ struct usb_device *udev;
+ struct usb_interface *intf;
+ struct driver_info *driver_info;
+ const char *driver_name;
+ void *driver_priv;
+ wait_queue_head_t wait;
+ struct mutex phy_mutex;
+ unsigned char suspend_count;
+ unsigned char pkt_cnt, pkt_err;
+ unsigned short rx_qlen, tx_qlen;
+ unsigned can_dma_sg:1;
+
+ /* i/o info: pipes etc */
+ unsigned in, out;
+ struct usb_host_endpoint *status;
+ unsigned maxpacket;
+ struct timer_list delay;
+ const char *padding_pkt;
+
+ /* protocol/interface state */
+ struct net_device *net;
+ int msg_enable;
+ unsigned long data[5];
+ u32 xid;
+ u32 hard_mtu; /* count any extra framing */
+ size_t rx_urb_size; /* size for rx urbs */
+ struct mii_if_info mii;
+
+ /* various kinds of pending driver work */
+ struct sk_buff_head rxq;
+ struct sk_buff_head txq;
+ struct sk_buff_head done;
+ struct sk_buff_head rxq_pause;
+ struct urb *interrupt;
+ unsigned interrupt_count;
+ struct mutex interrupt_mutex;
+ struct usb_anchor deferred;
+ struct tasklet_struct bh;
+
+ struct work_struct kevent;
+ unsigned long flags;
+# define EVENT_TX_HALT 0
+# define EVENT_RX_HALT 1
+# define EVENT_RX_MEMORY 2
+# define EVENT_STS_SPLIT 3
+# define EVENT_LINK_RESET 4
+# define EVENT_RX_PAUSED 5
+# define EVENT_DEV_ASLEEP 6
+# define EVENT_DEV_OPEN 7
+# define EVENT_DEVICE_REPORT_IDLE 8
+# define EVENT_NO_RUNTIME_PM 9
+# define EVENT_RX_KILL 10
+# define EVENT_LINK_CHANGE 11
+# define EVENT_SET_RX_MODE 12
+};
+
+static inline struct usb_driver *driver_of(struct usb_interface *intf)
+{
+ return to_usb_driver(intf->dev.driver);
+}
+
+/* interface from the device/framing level "minidriver" to core */
+struct driver_info {
+ char *description;
+
+ int flags;
+/* framing is CDC Ethernet, not writing ZLPs (hw issues), or optionally: */
+#define FLAG_FRAMING_NC 0x0001 /* guard against device dropouts */
+#define FLAG_FRAMING_GL 0x0002 /* genelink batches packets */
+#define FLAG_FRAMING_Z 0x0004 /* zaurus adds a trailer */
+#define FLAG_FRAMING_RN 0x0008 /* RNDIS batches, plus huge header */
+
+#define FLAG_NO_SETINT 0x0010 /* device can't set_interface() */
+#define FLAG_ETHER 0x0020 /* maybe use "eth%d" names */
+
+#define FLAG_FRAMING_AX 0x0040 /* AX88772/178 packets */
+#define FLAG_WLAN 0x0080 /* use "wlan%d" names */
+#define FLAG_AVOID_UNLINK_URBS 0x0100 /* don't unlink urbs at usbnet_stop() */
+#define FLAG_SEND_ZLP 0x0200 /* hw requires ZLPs are sent */
+#define FLAG_WWAN 0x0400 /* use "wwan%d" names */
+
+#define FLAG_LINK_INTR 0x0800 /* updates link (carrier) status */
+
+#define FLAG_POINTTOPOINT 0x1000 /* possibly use "usb%d" names */
+
+/*
+ * Indicates to usbnet, that USB driver accumulates multiple IP packets.
+ * Affects statistic (counters) and short packet handling.
+ */
+#define FLAG_MULTI_PACKET 0x2000
+#define FLAG_RX_ASSEMBLE 0x4000 /* rx packets may span >1 frames */
+#define FLAG_NOARP 0x8000 /* device can't do ARP */
+
+ /* init device ... can sleep, or cause probe() failure */
+ int (*bind)(struct usbnet *, struct usb_interface *);
+
+ /* cleanup device ... can sleep, but can't fail */
+ void (*unbind)(struct usbnet *, struct usb_interface *);
+
+ /* reset device ... can sleep */
+ int (*reset)(struct usbnet *);
+
+ /* stop device ... can sleep */
+ int (*stop)(struct usbnet *);
+
+ /* see if peer is connected ... can sleep */
+ int (*check_connect)(struct usbnet *);
+
+ /* (dis)activate runtime power management */
+ int (*manage_power)(struct usbnet *, int);
+
+ /* for status polling */
+ void (*status)(struct usbnet *, struct urb *);
+
+ /* link reset handling, called from defer_kevent */
+ int (*link_reset)(struct usbnet *);
+
+ /* fixup rx packet (strip framing) */
+ int (*rx_fixup)(struct usbnet *dev, struct sk_buff *skb);
+
+ /* fixup tx packet (add framing) */
+ struct sk_buff *(*tx_fixup)(struct usbnet *dev,
+ struct sk_buff *skb, gfp_t flags);
+
+ /* recover from timeout */
+ void (*recover)(struct usbnet *dev);
+
+ /* early initialization code, can sleep. This is for minidrivers
+ * having 'subminidrivers' that need to do extra initialization
+ * right after minidriver have initialized hardware. */
+ int (*early_init)(struct usbnet *dev);
+
+ /* called by minidriver when receiving indication */
+ void (*indication)(struct usbnet *dev, void *ind, int indlen);
+
+ /* rx mode change (device changes address list filtering) */
+ void (*set_rx_mode)(struct usbnet *dev);
+
+ /* for new devices, use the descriptor-reading code instead */
+ int in; /* rx endpoint */
+ int out; /* tx endpoint */
+
+ unsigned long data; /* Misc driver specific data */
+};
+
+/* Minidrivers are just drivers using the "usbnet" core as a powerful
+ * network-specific subroutine library ... that happens to do pretty
+ * much everything except custom framing and chip-specific stuff.
+ */
+extern int usbnet_probe(struct usb_interface *, const struct usb_device_id *);
+extern int usbnet_suspend(struct usb_interface *, pm_message_t);
+extern int usbnet_resume(struct usb_interface *);
+extern void usbnet_disconnect(struct usb_interface *);
+extern void usbnet_device_suggests_idle(struct usbnet *dev);
+
+extern int usbnet_read_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
+ u16 value, u16 index, void *data, u16 size);
+extern int usbnet_write_cmd(struct usbnet *dev, u8 cmd, u8 reqtype,
+ u16 value, u16 index, const void *data, u16 size);
+extern int usbnet_read_cmd_nopm(struct usbnet *dev, u8 cmd, u8 reqtype,
+ u16 value, u16 index, void *data, u16 size);
+extern int usbnet_write_cmd_nopm(struct usbnet *dev, u8 cmd, u8 reqtype,
+ u16 value, u16 index, const void *data, u16 size);
+extern int usbnet_write_cmd_async(struct usbnet *dev, u8 cmd, u8 reqtype,
+ u16 value, u16 index, const void *data, u16 size);
+
+/* Drivers that reuse some of the standard USB CDC infrastructure
+ * (notably, using multiple interfaces according to the CDC
+ * union descriptor) get some helper code.
+ */
+struct cdc_state {
+ struct usb_cdc_header_desc *header;
+ struct usb_cdc_union_desc *u;
+ struct usb_cdc_ether_desc *ether;
+ struct usb_interface *control;
+ struct usb_interface *data;
+};
+
+extern int usbnet_generic_cdc_bind(struct usbnet *, struct usb_interface *);
+extern int usbnet_cdc_bind(struct usbnet *, struct usb_interface *);
+extern void usbnet_cdc_unbind(struct usbnet *, struct usb_interface *);
+extern void usbnet_cdc_status(struct usbnet *, struct urb *);
+
+/* CDC and RNDIS support the same host-chosen packet filters for IN transfers */
+#define DEFAULT_FILTER (USB_CDC_PACKET_TYPE_BROADCAST \
+ |USB_CDC_PACKET_TYPE_ALL_MULTICAST \
+ |USB_CDC_PACKET_TYPE_PROMISCUOUS \
+ |USB_CDC_PACKET_TYPE_DIRECTED)
+
+
+/* we record the state for each of our queued skbs */
+enum skb_state {
+ illegal = 0,
+ tx_start, tx_done,
+ rx_start, rx_done, rx_cleanup,
+ unlink_start
+};
+
+struct skb_data { /* skb->cb is one of these */
+ struct urb *urb;
+ struct usbnet *dev;
+ enum skb_state state;
+ long length;
+ unsigned long packets;
+};
+
+/* Drivers that set FLAG_MULTI_PACKET must call this in their
+ * tx_fixup method before returning an skb.
+ */
+static inline void
+usbnet_set_skb_tx_stats(struct sk_buff *skb,
+ unsigned long packets, long bytes_delta)
+{
+ struct skb_data *entry = (struct skb_data *) skb->cb;
+
+ entry->packets = packets;
+ entry->length = bytes_delta;
+}
+
+extern int usbnet_open(struct net_device *net);
+extern int usbnet_stop(struct net_device *net);
+extern netdev_tx_t usbnet_start_xmit(struct sk_buff *skb,
+ struct net_device *net);
+extern void usbnet_tx_timeout(struct net_device *net);
+extern int usbnet_change_mtu(struct net_device *net, int new_mtu);
+
+extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *);
+extern int usbnet_get_ethernet_addr(struct usbnet *, int);
+extern void usbnet_defer_kevent(struct usbnet *, int);
+extern void usbnet_skb_return(struct usbnet *, struct sk_buff *);
+extern void usbnet_unlink_rx_urbs(struct usbnet *);
+
+extern void usbnet_pause_rx(struct usbnet *);
+extern void usbnet_resume_rx(struct usbnet *);
+extern void usbnet_purge_paused_rxq(struct usbnet *);
+
+extern int usbnet_get_settings(struct net_device *net,
+ struct ethtool_cmd *cmd);
+extern int usbnet_set_settings(struct net_device *net,
+ struct ethtool_cmd *cmd);
+extern u32 usbnet_get_link(struct net_device *net);
+extern u32 usbnet_get_msglevel(struct net_device *);
+extern void usbnet_set_msglevel(struct net_device *, u32);
+extern void usbnet_get_drvinfo(struct net_device *, struct ethtool_drvinfo *);
+extern int usbnet_nway_reset(struct net_device *net);
+
+extern int usbnet_manage_power(struct usbnet *, int);
+extern void usbnet_link_change(struct usbnet *, bool, bool);
+
+extern int usbnet_status_start(struct usbnet *dev, gfp_t mem_flags);
+extern void usbnet_status_stop(struct usbnet *dev);
+
+extern void usbnet_update_max_qlen(struct usbnet *dev);
+
+#endif /* __LINUX_USB_USBNET_H */
diff --git a/kernel/include/linux/usb/wusb-wa.h b/kernel/include/linux/usb/wusb-wa.h
new file mode 100644
index 000000000..c12571307
--- /dev/null
+++ b/kernel/include/linux/usb/wusb-wa.h
@@ -0,0 +1,303 @@
+/*
+ * Wireless USB Wire Adapter constants and structures.
+ *
+ * Copyright (C) 2005-2006 Intel Corporation.
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ * FIXME: organize properly, group logically
+ *
+ * All the event structures are defined in uwb/spec.h, as they are
+ * common to the WHCI and WUSB radio control interfaces.
+ *
+ * References:
+ * [WUSB] Wireless Universal Serial Bus Specification, revision 1.0, ch8
+ */
+#ifndef __LINUX_USB_WUSB_WA_H
+#define __LINUX_USB_WUSB_WA_H
+
+/**
+ * Radio Command Request for the Radio Control Interface
+ *
+ * Radio Control Interface command and event codes are the same as
+ * WHCI, and listed in include/linux/uwb.h:UWB_RC_{CMD,EVT}_*
+ */
+enum {
+ WA_EXEC_RC_CMD = 40, /* Radio Control command Request */
+};
+
+/* Wireless Adapter Requests ([WUSB] table 8-51) */
+enum {
+ WUSB_REQ_ADD_MMC_IE = 20,
+ WUSB_REQ_REMOVE_MMC_IE = 21,
+ WUSB_REQ_SET_NUM_DNTS = 22,
+ WUSB_REQ_SET_CLUSTER_ID = 23,
+ WUSB_REQ_SET_DEV_INFO = 24,
+ WUSB_REQ_GET_TIME = 25,
+ WUSB_REQ_SET_STREAM_IDX = 26,
+ WUSB_REQ_SET_WUSB_MAS = 27,
+ WUSB_REQ_CHAN_STOP = 28,
+};
+
+
+/* Wireless Adapter WUSB Channel Time types ([WUSB] table 8-52) */
+enum {
+ WUSB_TIME_ADJ = 0,
+ WUSB_TIME_BPST = 1,
+ WUSB_TIME_WUSB = 2,
+};
+
+enum {
+ WA_ENABLE = 0x01,
+ WA_RESET = 0x02,
+ RPIPE_PAUSE = 0x1,
+ RPIPE_STALL = 0x2,
+};
+
+/* Responses from Get Status request ([WUSB] section 8.3.1.6) */
+enum {
+ WA_STATUS_ENABLED = 0x01,
+ WA_STATUS_RESETTING = 0x02
+};
+
+enum rpipe_crs {
+ RPIPE_CRS_CTL = 0x01,
+ RPIPE_CRS_ISO = 0x02,
+ RPIPE_CRS_BULK = 0x04,
+ RPIPE_CRS_INTR = 0x08
+};
+
+/**
+ * RPipe descriptor ([WUSB] section 8.5.2.11)
+ *
+ * FIXME: explain rpipes
+ */
+struct usb_rpipe_descriptor {
+ u8 bLength;
+ u8 bDescriptorType;
+ __le16 wRPipeIndex;
+ __le16 wRequests;
+ __le16 wBlocks; /* rw if 0 */
+ __le16 wMaxPacketSize; /* rw */
+ union {
+ u8 dwa_bHSHubAddress; /* rw: DWA. */
+ u8 hwa_bMaxBurst; /* rw: HWA. */
+ };
+ union {
+ u8 dwa_bHSHubPort; /* rw: DWA. */
+ u8 hwa_bDeviceInfoIndex; /* rw: HWA. */
+ };
+ u8 bSpeed; /* rw: xfer rate 'enum uwb_phy_rate' */
+ union {
+ u8 dwa_bDeviceAddress; /* rw: DWA Target device address. */
+ u8 hwa_reserved; /* rw: HWA. */
+ };
+ u8 bEndpointAddress; /* rw: Target EP address */
+ u8 bDataSequence; /* ro: Current Data sequence */
+ __le32 dwCurrentWindow; /* ro */
+ u8 bMaxDataSequence; /* ro?: max supported seq */
+ u8 bInterval; /* rw: */
+ u8 bOverTheAirInterval; /* rw: */
+ u8 bmAttribute; /* ro? */
+ u8 bmCharacteristics; /* ro? enum rpipe_attr, supported xsactions */
+ u8 bmRetryOptions; /* rw? */
+ __le16 wNumTransactionErrors; /* rw */
+} __attribute__ ((packed));
+
+/**
+ * Wire Adapter Notification types ([WUSB] sections 8.4.5 & 8.5.4)
+ *
+ * These are the notifications coming on the notification endpoint of
+ * an HWA and a DWA.
+ */
+enum wa_notif_type {
+ DWA_NOTIF_RWAKE = 0x91,
+ DWA_NOTIF_PORTSTATUS = 0x92,
+ WA_NOTIF_TRANSFER = 0x93,
+ HWA_NOTIF_BPST_ADJ = 0x94,
+ HWA_NOTIF_DN = 0x95,
+};
+
+/**
+ * Wire Adapter notification header
+ *
+ * Notifications coming from a wire adapter use a common header
+ * defined in [WUSB] sections 8.4.5 & 8.5.4.
+ */
+struct wa_notif_hdr {
+ u8 bLength;
+ u8 bNotifyType; /* enum wa_notif_type */
+} __packed;
+
+/**
+ * HWA DN Received notification [(WUSB] section 8.5.4.2)
+ *
+ * The DNData is specified in WUSB1.0[7.6]. For each device
+ * notification we received, we just need to dispatch it.
+ *
+ * @dndata: this is really an array of notifications, but all start
+ * with the same header.
+ */
+struct hwa_notif_dn {
+ struct wa_notif_hdr hdr;
+ u8 bSourceDeviceAddr; /* from errata 2005/07 */
+ u8 bmAttributes;
+ struct wusb_dn_hdr dndata[];
+} __packed;
+
+/* [WUSB] section 8.3.3 */
+enum wa_xfer_type {
+ WA_XFER_TYPE_CTL = 0x80,
+ WA_XFER_TYPE_BI = 0x81, /* bulk/interrupt */
+ WA_XFER_TYPE_ISO = 0x82,
+ WA_XFER_RESULT = 0x83,
+ WA_XFER_ABORT = 0x84,
+ WA_XFER_ISO_PACKET_INFO = 0xA0,
+ WA_XFER_ISO_PACKET_STATUS = 0xA1,
+};
+
+/* [WUSB] section 8.3.3 */
+struct wa_xfer_hdr {
+ u8 bLength; /* 0x18 */
+ u8 bRequestType; /* 0x80 WA_REQUEST_TYPE_CTL */
+ __le16 wRPipe; /* RPipe index */
+ __le32 dwTransferID; /* Host-assigned ID */
+ __le32 dwTransferLength; /* Length of data to xfer */
+ u8 bTransferSegment;
+} __packed;
+
+struct wa_xfer_ctl {
+ struct wa_xfer_hdr hdr;
+ u8 bmAttribute;
+ __le16 wReserved;
+ struct usb_ctrlrequest baSetupData;
+} __packed;
+
+struct wa_xfer_bi {
+ struct wa_xfer_hdr hdr;
+ u8 bReserved;
+ __le16 wReserved;
+} __packed;
+
+/* [WUSB] section 8.5.5 */
+struct wa_xfer_hwaiso {
+ struct wa_xfer_hdr hdr;
+ u8 bReserved;
+ __le16 wPresentationTime;
+ __le32 dwNumOfPackets;
+} __packed;
+
+struct wa_xfer_packet_info_hwaiso {
+ __le16 wLength;
+ u8 bPacketType;
+ u8 bReserved;
+ __le16 PacketLength[0];
+} __packed;
+
+struct wa_xfer_packet_status_len_hwaiso {
+ __le16 PacketLength;
+ __le16 PacketStatus;
+} __packed;
+
+struct wa_xfer_packet_status_hwaiso {
+ __le16 wLength;
+ u8 bPacketType;
+ u8 bReserved;
+ struct wa_xfer_packet_status_len_hwaiso PacketStatus[0];
+} __packed;
+
+/* [WUSB] section 8.3.3.5 */
+struct wa_xfer_abort {
+ u8 bLength;
+ u8 bRequestType;
+ __le16 wRPipe; /* RPipe index */
+ __le32 dwTransferID; /* Host-assigned ID */
+} __packed;
+
+/**
+ * WA Transfer Complete notification ([WUSB] section 8.3.3.3)
+ *
+ */
+struct wa_notif_xfer {
+ struct wa_notif_hdr hdr;
+ u8 bEndpoint;
+ u8 Reserved;
+} __packed;
+
+/** Transfer result basic codes [WUSB] table 8-15 */
+enum {
+ WA_XFER_STATUS_SUCCESS,
+ WA_XFER_STATUS_HALTED,
+ WA_XFER_STATUS_DATA_BUFFER_ERROR,
+ WA_XFER_STATUS_BABBLE,
+ WA_XFER_RESERVED,
+ WA_XFER_STATUS_NOT_FOUND,
+ WA_XFER_STATUS_INSUFFICIENT_RESOURCE,
+ WA_XFER_STATUS_TRANSACTION_ERROR,
+ WA_XFER_STATUS_ABORTED,
+ WA_XFER_STATUS_RPIPE_NOT_READY,
+ WA_XFER_INVALID_FORMAT,
+ WA_XFER_UNEXPECTED_SEGMENT_NUMBER,
+ WA_XFER_STATUS_RPIPE_TYPE_MISMATCH,
+};
+
+/** [WUSB] section 8.3.3.4 */
+struct wa_xfer_result {
+ struct wa_notif_hdr hdr;
+ __le32 dwTransferID;
+ __le32 dwTransferLength;
+ u8 bTransferSegment;
+ u8 bTransferStatus;
+ __le32 dwNumOfPackets;
+} __packed;
+
+/**
+ * Wire Adapter Class Descriptor ([WUSB] section 8.5.2.7).
+ *
+ * NOTE: u16 fields are read Little Endian from the hardware.
+ *
+ * @bNumPorts is the original max number of devices that the host can
+ * connect; we might chop this so the stack can handle
+ * it. In case you need to access it, use wusbhc->ports_max
+ * if it is a Wireless USB WA.
+ */
+struct usb_wa_descriptor {
+ u8 bLength;
+ u8 bDescriptorType;
+ __le16 bcdWAVersion;
+ u8 bNumPorts; /* don't use!! */
+ u8 bmAttributes; /* Reserved == 0 */
+ __le16 wNumRPipes;
+ __le16 wRPipeMaxBlock;
+ u8 bRPipeBlockSize;
+ u8 bPwrOn2PwrGood;
+ u8 bNumMMCIEs;
+ u8 DeviceRemovable; /* FIXME: in DWA this is up to 16 bytes */
+} __packed;
+
+/**
+ * HWA Device Information Buffer (WUSB1.0[T8.54])
+ */
+struct hwa_dev_info {
+ u8 bmDeviceAvailability[32]; /* FIXME: ignored for now */
+ u8 bDeviceAddress;
+ __le16 wPHYRates;
+ u8 bmDeviceAttribute;
+} __packed;
+
+#endif /* #ifndef __LINUX_USB_WUSB_WA_H */
diff --git a/kernel/include/linux/usb/wusb.h b/kernel/include/linux/usb/wusb.h
new file mode 100644
index 000000000..eeb28329f
--- /dev/null
+++ b/kernel/include/linux/usb/wusb.h
@@ -0,0 +1,377 @@
+/*
+ * Wireless USB Standard Definitions
+ * Event Size Tables
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ * FIXME: organize properly, group logically
+ *
+ * All the event structures are defined in uwb/spec.h, as they are
+ * common to the WHCI and WUSB radio control interfaces.
+ */
+
+#ifndef __WUSB_H__
+#define __WUSB_H__
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/uwb/spec.h>
+#include <linux/usb/ch9.h>
+#include <linux/param.h>
+
+/**
+ * WUSB Information Element header
+ *
+ * I don't know why, they decided to make it different to the MBOA MAC
+ * IE Header; beats me.
+ */
+struct wuie_hdr {
+ u8 bLength;
+ u8 bIEIdentifier;
+} __attribute__((packed));
+
+enum {
+ WUIE_ID_WCTA = 0x80,
+ WUIE_ID_CONNECTACK,
+ WUIE_ID_HOST_INFO,
+ WUIE_ID_CHANGE_ANNOUNCE,
+ WUIE_ID_DEVICE_DISCONNECT,
+ WUIE_ID_HOST_DISCONNECT,
+ WUIE_ID_KEEP_ALIVE = 0x89,
+ WUIE_ID_ISOCH_DISCARD,
+ WUIE_ID_RESET_DEVICE,
+};
+
+/**
+ * Maximum number of array elements in a WUSB IE.
+ *
+ * WUSB1.0[7.5 before table 7-38] says that in WUSB IEs that
+ * are "arrays" have to limited to 4 elements. So we define it
+ * like that to ease up and submit only the neeed size.
+ */
+#define WUIE_ELT_MAX 4
+
+/**
+ * Wrapper for the data that defines a CHID, a CDID or a CK
+ *
+ * WUSB defines that CHIDs, CDIDs and CKs are a 16 byte string of
+ * data. In order to avoid confusion and enforce types, we wrap it.
+ *
+ * Make it packed, as we use it in some hw definitions.
+ */
+struct wusb_ckhdid {
+ u8 data[16];
+} __attribute__((packed));
+
+static const struct wusb_ckhdid wusb_ckhdid_zero = { .data = { 0 } };
+
+#define WUSB_CKHDID_STRSIZE (3 * sizeof(struct wusb_ckhdid) + 1)
+
+/**
+ * WUSB IE: Host Information (WUSB1.0[7.5.2])
+ *
+ * Used to provide information about the host to the Wireless USB
+ * devices in range (CHID can be used as an ASCII string).
+ */
+struct wuie_host_info {
+ struct wuie_hdr hdr;
+ __le16 attributes;
+ struct wusb_ckhdid CHID;
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Connect Ack (WUSB1.0[7.5.1])
+ *
+ * Used to acknowledge device connect requests. See note for
+ * WUIE_ELT_MAX.
+ */
+struct wuie_connect_ack {
+ struct wuie_hdr hdr;
+ struct {
+ struct wusb_ckhdid CDID;
+ u8 bDeviceAddress; /* 0 means unused */
+ u8 bReserved;
+ } blk[WUIE_ELT_MAX];
+} __attribute__((packed));
+
+/**
+ * WUSB IE Host Information Element, Connect Availability
+ *
+ * WUSB1.0[7.5.2], bmAttributes description
+ */
+enum {
+ WUIE_HI_CAP_RECONNECT = 0,
+ WUIE_HI_CAP_LIMITED,
+ WUIE_HI_CAP_RESERVED,
+ WUIE_HI_CAP_ALL,
+};
+
+/**
+ * WUSB IE: Channel Stop (WUSB1.0[7.5.8])
+ *
+ * Tells devices the host is going to stop sending MMCs and will disappear.
+ */
+struct wuie_channel_stop {
+ struct wuie_hdr hdr;
+ u8 attributes;
+ u8 timestamp[3];
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Keepalive (WUSB1.0[7.5.9])
+ *
+ * Ask device(s) to send keepalives.
+ */
+struct wuie_keep_alive {
+ struct wuie_hdr hdr;
+ u8 bDeviceAddress[WUIE_ELT_MAX];
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Reset device (WUSB1.0[7.5.11])
+ *
+ * Tell device to reset; in all truth, we can fit 4 CDIDs, but we only
+ * use it for one at the time...
+ *
+ * In any case, this request is a wee bit silly: why don't they target
+ * by address??
+ */
+struct wuie_reset {
+ struct wuie_hdr hdr;
+ struct wusb_ckhdid CDID;
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Disconnect device (WUSB1.0[7.5.11])
+ *
+ * Tell device to disconnect; we can fit 4 addresses, but we only use
+ * it for one at the time...
+ */
+struct wuie_disconnect {
+ struct wuie_hdr hdr;
+ u8 bDeviceAddress;
+ u8 padding;
+} __attribute__((packed));
+
+/**
+ * WUSB IE: Host disconnect ([WUSB] section 7.5.5)
+ *
+ * Tells all connected devices to disconnect.
+ */
+struct wuie_host_disconnect {
+ struct wuie_hdr hdr;
+} __attribute__((packed));
+
+/**
+ * WUSB Device Notification header (WUSB1.0[7.6])
+ */
+struct wusb_dn_hdr {
+ u8 bType;
+ u8 notifdata[];
+} __attribute__((packed));
+
+/** Device Notification codes (WUSB1.0[Table 7-54]) */
+enum WUSB_DN {
+ WUSB_DN_CONNECT = 0x01,
+ WUSB_DN_DISCONNECT = 0x02,
+ WUSB_DN_EPRDY = 0x03,
+ WUSB_DN_MASAVAILCHANGED = 0x04,
+ WUSB_DN_RWAKE = 0x05,
+ WUSB_DN_SLEEP = 0x06,
+ WUSB_DN_ALIVE = 0x07,
+};
+
+/** WUSB Device Notification Connect */
+struct wusb_dn_connect {
+ struct wusb_dn_hdr hdr;
+ __le16 attributes;
+ struct wusb_ckhdid CDID;
+} __attribute__((packed));
+
+static inline int wusb_dn_connect_prev_dev_addr(const struct wusb_dn_connect *dn)
+{
+ return le16_to_cpu(dn->attributes) & 0xff;
+}
+
+static inline int wusb_dn_connect_new_connection(const struct wusb_dn_connect *dn)
+{
+ return (le16_to_cpu(dn->attributes) >> 8) & 0x1;
+}
+
+static inline int wusb_dn_connect_beacon_behavior(const struct wusb_dn_connect *dn)
+{
+ return (le16_to_cpu(dn->attributes) >> 9) & 0x03;
+}
+
+/** Device is alive (aka: pong) (WUSB1.0[7.6.7]) */
+struct wusb_dn_alive {
+ struct wusb_dn_hdr hdr;
+} __attribute__((packed));
+
+/** Device is disconnecting (WUSB1.0[7.6.2]) */
+struct wusb_dn_disconnect {
+ struct wusb_dn_hdr hdr;
+} __attribute__((packed));
+
+/* General constants */
+enum {
+ WUSB_TRUST_TIMEOUT_MS = 4000, /* [WUSB] section 4.15.1 */
+};
+
+static inline size_t ckhdid_printf(char *pr_ckhdid, size_t size,
+ const struct wusb_ckhdid *ckhdid)
+{
+ return scnprintf(pr_ckhdid, size,
+ "%02hx %02hx %02hx %02hx %02hx %02hx %02hx %02hx "
+ "%02hx %02hx %02hx %02hx %02hx %02hx %02hx %02hx",
+ ckhdid->data[0], ckhdid->data[1],
+ ckhdid->data[2], ckhdid->data[3],
+ ckhdid->data[4], ckhdid->data[5],
+ ckhdid->data[6], ckhdid->data[7],
+ ckhdid->data[8], ckhdid->data[9],
+ ckhdid->data[10], ckhdid->data[11],
+ ckhdid->data[12], ckhdid->data[13],
+ ckhdid->data[14], ckhdid->data[15]);
+}
+
+/*
+ * WUSB Crypto stuff (WUSB1.0[6])
+ */
+
+extern const char *wusb_et_name(u8);
+
+/**
+ * WUSB key index WUSB1.0[7.3.2.4], for usage when setting keys for
+ * the host or the device.
+ */
+static inline u8 wusb_key_index(int index, int type, int originator)
+{
+ return (originator << 6) | (type << 4) | index;
+}
+
+#define WUSB_KEY_INDEX_TYPE_PTK 0 /* for HWA only */
+#define WUSB_KEY_INDEX_TYPE_ASSOC 1
+#define WUSB_KEY_INDEX_TYPE_GTK 2
+#define WUSB_KEY_INDEX_ORIGINATOR_HOST 0
+#define WUSB_KEY_INDEX_ORIGINATOR_DEVICE 1
+/* bits 0-3 used for the key index. */
+#define WUSB_KEY_INDEX_MAX 15
+
+/* A CCM Nonce, defined in WUSB1.0[6.4.1] */
+struct aes_ccm_nonce {
+ u8 sfn[6]; /* Little Endian */
+ u8 tkid[3]; /* LE */
+ struct uwb_dev_addr dest_addr;
+ struct uwb_dev_addr src_addr;
+} __attribute__((packed));
+
+/* A CCM operation label, defined on WUSB1.0[6.5.x] */
+struct aes_ccm_label {
+ u8 data[14];
+} __attribute__((packed));
+
+/*
+ * Input to the key derivation sequence defined in
+ * WUSB1.0[6.5.1]. Rest of the data is in the CCM Nonce passed to the
+ * PRF function.
+ */
+struct wusb_keydvt_in {
+ u8 hnonce[16];
+ u8 dnonce[16];
+} __attribute__((packed));
+
+/*
+ * Output from the key derivation sequence defined in
+ * WUSB1.0[6.5.1].
+ */
+struct wusb_keydvt_out {
+ u8 kck[16];
+ u8 ptk[16];
+} __attribute__((packed));
+
+/* Pseudo Random Function WUSB1.0[6.5] */
+extern int wusb_crypto_init(void);
+extern void wusb_crypto_exit(void);
+extern ssize_t wusb_prf(void *out, size_t out_size,
+ const u8 key[16], const struct aes_ccm_nonce *_n,
+ const struct aes_ccm_label *a,
+ const void *b, size_t blen, size_t len);
+
+static inline int wusb_prf_64(void *out, size_t out_size, const u8 key[16],
+ const struct aes_ccm_nonce *n,
+ const struct aes_ccm_label *a,
+ const void *b, size_t blen)
+{
+ return wusb_prf(out, out_size, key, n, a, b, blen, 64);
+}
+
+static inline int wusb_prf_128(void *out, size_t out_size, const u8 key[16],
+ const struct aes_ccm_nonce *n,
+ const struct aes_ccm_label *a,
+ const void *b, size_t blen)
+{
+ return wusb_prf(out, out_size, key, n, a, b, blen, 128);
+}
+
+static inline int wusb_prf_256(void *out, size_t out_size, const u8 key[16],
+ const struct aes_ccm_nonce *n,
+ const struct aes_ccm_label *a,
+ const void *b, size_t blen)
+{
+ return wusb_prf(out, out_size, key, n, a, b, blen, 256);
+}
+
+/* Key derivation WUSB1.0[6.5.1] */
+static inline int wusb_key_derive(struct wusb_keydvt_out *keydvt_out,
+ const u8 key[16],
+ const struct aes_ccm_nonce *n,
+ const struct wusb_keydvt_in *keydvt_in)
+{
+ const struct aes_ccm_label a = { .data = "Pair-wise keys" };
+ return wusb_prf_256(keydvt_out, sizeof(*keydvt_out), key, n, &a,
+ keydvt_in, sizeof(*keydvt_in));
+}
+
+/*
+ * Out-of-band MIC Generation WUSB1.0[6.5.2]
+ *
+ * Compute the MIC over @key, @n and @hs and place it in @mic_out.
+ *
+ * @mic_out: Where to place the 8 byte MIC tag
+ * @key: KCK from the derivation process
+ * @n: CCM nonce, n->sfn == 0, TKID as established in the
+ * process.
+ * @hs: Handshake struct for phase 2 of the 4-way.
+ * hs->bStatus and hs->bReserved are zero.
+ * hs->bMessageNumber is 2 (WUSB1.0[7.3.2.5.2]
+ * hs->dest_addr is the device's USB address padded with 0
+ * hs->src_addr is the hosts's UWB device address
+ * hs->mic is ignored (as we compute that value).
+ */
+static inline int wusb_oob_mic(u8 mic_out[8], const u8 key[16],
+ const struct aes_ccm_nonce *n,
+ const struct usb_handshake *hs)
+{
+ const struct aes_ccm_label a = { .data = "out-of-bandMIC" };
+ return wusb_prf_64(mic_out, 8, key, n, &a,
+ hs, sizeof(*hs) - sizeof(hs->MIC));
+}
+
+#endif /* #ifndef __WUSB_H__ */
diff --git a/kernel/include/linux/usb/xhci_pdriver.h b/kernel/include/linux/usb/xhci_pdriver.h
new file mode 100644
index 000000000..376654b5b
--- /dev/null
+++ b/kernel/include/linux/usb/xhci_pdriver.h
@@ -0,0 +1,27 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ */
+
+#ifndef __USB_CORE_XHCI_PDRIVER_H
+#define __USB_CORE_XHCI_PDRIVER_H
+
+/**
+ * struct usb_xhci_pdata - platform_data for generic xhci platform driver
+ *
+ * @usb3_lpm_capable: determines if this xhci platform supports USB3
+ * LPM capability
+ *
+ */
+struct usb_xhci_pdata {
+ unsigned usb3_lpm_capable:1;
+};
+
+#endif /* __USB_CORE_XHCI_PDRIVER_H */