diff options
Diffstat (limited to 'kernel/include/linux/usb/ehci_def.h')
| -rw-r--r-- | kernel/include/linux/usb/ehci_def.h | 195 |
1 files changed, 195 insertions, 0 deletions
diff --git a/kernel/include/linux/usb/ehci_def.h b/kernel/include/linux/usb/ehci_def.h new file mode 100644 index 000000000..966889a20 --- /dev/null +++ b/kernel/include/linux/usb/ehci_def.h @@ -0,0 +1,195 @@ +/* + * Copyright (c) 2001-2002 by David Brownell + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __LINUX_USB_EHCI_DEF_H +#define __LINUX_USB_EHCI_DEF_H + +#include <linux/usb/ehci-dbgp.h> + +/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */ + +/* Section 2.2 Host Controller Capability Registers */ +struct ehci_caps { + /* these fields are specified as 8 and 16 bit registers, + * but some hosts can't perform 8 or 16 bit PCI accesses. + * some hosts treat caplength and hciversion as parts of a 32-bit + * register, others treat them as two separate registers, this + * affects the memory map for big endian controllers. + */ + u32 hc_capbase; +#define HC_LENGTH(ehci, p) (0x00ff&((p) >> /* bits 7:0 / offset 00h */ \ + (ehci_big_endian_capbase(ehci) ? 24 : 0))) +#define HC_VERSION(ehci, p) (0xffff&((p) >> /* bits 31:16 / offset 02h */ \ + (ehci_big_endian_capbase(ehci) ? 0 : 16))) + u32 hcs_params; /* HCSPARAMS - offset 0x4 */ +#define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */ +#define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ +#define HCS_N_CC(p) (((p)>>12)&0xf) /* bits 15:12, #companion HCs */ +#define HCS_N_PCC(p) (((p)>>8)&0xf) /* bits 11:8, ports per CC */ +#define HCS_PORTROUTED(p) ((p)&(1 << 7)) /* true: port routing */ +#define HCS_PPC(p) ((p)&(1 << 4)) /* true: port power control */ +#define HCS_N_PORTS(p) (((p)>>0)&0xf) /* bits 3:0, ports on HC */ + + u32 hcc_params; /* HCCPARAMS - offset 0x8 */ +/* EHCI 1.1 addendum */ +#define HCC_32FRAME_PERIODIC_LIST(p) ((p)&(1 << 19)) +#define HCC_PER_PORT_CHANGE_EVENT(p) ((p)&(1 << 18)) +#define HCC_LPM(p) ((p)&(1 << 17)) +#define HCC_HW_PREFETCH(p) ((p)&(1 << 16)) + +#define HCC_EXT_CAPS(p) (((p)>>8)&0xff) /* for pci extended caps */ +#define HCC_ISOC_CACHE(p) ((p)&(1 << 7)) /* true: can cache isoc frame */ +#define HCC_ISOC_THRES(p) (((p)>>4)&0x7) /* bits 6:4, uframes cached */ +#define HCC_CANPARK(p) ((p)&(1 << 2)) /* true: can park on async qh */ +#define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/ +#define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */ + u8 portroute[8]; /* nibbles for routing - offset 0xC */ +}; + + +/* Section 2.3 Host Controller Operational Registers */ +struct ehci_regs { + + /* USBCMD: offset 0x00 */ + u32 command; + +/* EHCI 1.1 addendum */ +#define CMD_HIRD (0xf<<24) /* host initiated resume duration */ +#define CMD_PPCEE (1<<15) /* per port change event enable */ +#define CMD_FSP (1<<14) /* fully synchronized prefetch */ +#define CMD_ASPE (1<<13) /* async schedule prefetch enable */ +#define CMD_PSPE (1<<12) /* periodic schedule prefetch enable */ +/* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */ +#define CMD_PARK (1<<11) /* enable "park" on async qh */ +#define CMD_PARK_CNT(c) (((c)>>8)&3) /* how many transfers to park for */ +#define CMD_LRESET (1<<7) /* partial reset (no ports, etc) */ +#define CMD_IAAD (1<<6) /* "doorbell" interrupt async advance */ +#define CMD_ASE (1<<5) /* async schedule enable */ +#define CMD_PSE (1<<4) /* periodic schedule enable */ +/* 3:2 is periodic frame list size */ +#define CMD_RESET (1<<1) /* reset HC not bus */ +#define CMD_RUN (1<<0) /* start/stop HC */ + + /* USBSTS: offset 0x04 */ + u32 status; +#define STS_PPCE_MASK (0xff<<16) /* Per-Port change event 1-16 */ +#define STS_ASS (1<<15) /* Async Schedule Status */ +#define STS_PSS (1<<14) /* Periodic Schedule Status */ +#define STS_RECL (1<<13) /* Reclamation */ +#define STS_HALT (1<<12) /* Not running (any reason) */ +/* some bits reserved */ + /* these STS_* flags are also intr_enable bits (USBINTR) */ +#define STS_IAA (1<<5) /* Interrupted on async advance */ +#define STS_FATAL (1<<4) /* such as some PCI access errors */ +#define STS_FLR (1<<3) /* frame list rolled over */ +#define STS_PCD (1<<2) /* port change detect */ +#define STS_ERR (1<<1) /* "error" completion (overflow, ...) */ +#define STS_INT (1<<0) /* "normal" completion (short, ...) */ + + /* USBINTR: offset 0x08 */ + u32 intr_enable; + + /* FRINDEX: offset 0x0C */ + u32 frame_index; /* current microframe number */ + /* CTRLDSSEGMENT: offset 0x10 */ + u32 segment; /* address bits 63:32 if needed */ + /* PERIODICLISTBASE: offset 0x14 */ + u32 frame_list; /* points to periodic list */ + /* ASYNCLISTADDR: offset 0x18 */ + u32 async_next; /* address of next async queue head */ + + u32 reserved1[2]; + + /* TXFILLTUNING: offset 0x24 */ + u32 txfill_tuning; /* TX FIFO Tuning register */ +#define TXFIFO_DEFAULT (8<<16) /* FIFO burst threshold 8 */ + + u32 reserved2[6]; + + /* CONFIGFLAG: offset 0x40 */ + u32 configured_flag; +#define FLAG_CF (1<<0) /* true: we'll support "high speed" */ + + /* PORTSC: offset 0x44 */ + u32 port_status[0]; /* up to N_PORTS */ +/* EHCI 1.1 addendum */ +#define PORTSC_SUSPEND_STS_ACK 0 +#define PORTSC_SUSPEND_STS_NYET 1 +#define PORTSC_SUSPEND_STS_STALL 2 +#define PORTSC_SUSPEND_STS_ERR 3 + +#define PORT_DEV_ADDR (0x7f<<25) /* device address */ +#define PORT_SSTS (0x3<<23) /* suspend status */ +/* 31:23 reserved */ +#define PORT_WKOC_E (1<<22) /* wake on overcurrent (enable) */ +#define PORT_WKDISC_E (1<<21) /* wake on disconnect (enable) */ +#define PORT_WKCONN_E (1<<20) /* wake on connect (enable) */ +/* 19:16 for port testing */ +#define PORT_TEST(x) (((x)&0xf)<<16) /* Port Test Control */ +#define PORT_TEST_PKT PORT_TEST(0x4) /* Port Test Control - packet test */ +#define PORT_TEST_FORCE PORT_TEST(0x5) /* Port Test Control - force enable */ +#define PORT_LED_OFF (0<<14) +#define PORT_LED_AMBER (1<<14) +#define PORT_LED_GREEN (2<<14) +#define PORT_LED_MASK (3<<14) +#define PORT_OWNER (1<<13) /* true: companion hc owns this port */ +#define PORT_POWER (1<<12) /* true: has power (see PPC) */ +#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10)) /* USB 1.1 device */ +/* 11:10 for detecting lowspeed devices (reset vs release ownership) */ +/* 9 reserved */ +#define PORT_LPM (1<<9) /* LPM transaction */ +#define PORT_RESET (1<<8) /* reset port */ +#define PORT_SUSPEND (1<<7) /* suspend port */ +#define PORT_RESUME (1<<6) /* resume it */ +#define PORT_OCC (1<<5) /* over current change */ +#define PORT_OC (1<<4) /* over current active */ +#define PORT_PEC (1<<3) /* port enable change */ +#define PORT_PE (1<<2) /* port enable */ +#define PORT_CSC (1<<1) /* connect status change */ +#define PORT_CONNECT (1<<0) /* device connected */ +#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) + + u32 reserved3[9]; + + /* USBMODE: offset 0x68 */ + u32 usbmode; /* USB Device mode */ +#define USBMODE_SDIS (1<<3) /* Stream disable */ +#define USBMODE_BE (1<<2) /* BE/LE endianness select */ +#define USBMODE_CM_HC (3<<0) /* host controller mode */ +#define USBMODE_CM_IDLE (0<<0) /* idle state */ + + u32 reserved4[6]; + +/* Moorestown has some non-standard registers, partially due to the fact that + * its EHCI controller has both TT and LPM support. HOSTPCx are extensions to + * PORTSCx + */ + /* HOSTPC: offset 0x84 */ + u32 hostpc[1]; /* HOSTPC extension */ +#define HOSTPC_PHCD (1<<22) /* Phy clock disable */ +#define HOSTPC_PSPD (3<<25) /* Port speed detection */ + + u32 reserved5[16]; + + /* USBMODE_EX: offset 0xc8 */ + u32 usbmode_ex; /* USB Device mode extension */ +#define USBMODE_EX_VBPS (1<<5) /* VBus Power Select On */ +#define USBMODE_EX_HC (3<<0) /* host controller mode */ +}; + +#endif /* __LINUX_USB_EHCI_DEF_H */ |