summaryrefslogtreecommitdiffstats
path: root/kernel/include/linux/ssb/ssb_driver_extif.h
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/include/linux/ssb/ssb_driver_extif.h')
-rw-r--r--kernel/include/linux/ssb/ssb_driver_extif.h259
1 files changed, 259 insertions, 0 deletions
diff --git a/kernel/include/linux/ssb/ssb_driver_extif.h b/kernel/include/linux/ssb/ssb_driver_extif.h
new file mode 100644
index 000000000..a410e841e
--- /dev/null
+++ b/kernel/include/linux/ssb/ssb_driver_extif.h
@@ -0,0 +1,259 @@
+/*
+ * Hardware-specific External Interface I/O core definitions
+ * for the BCM47xx family of SiliconBackplane-based chips.
+ *
+ * The External Interface core supports a total of three external chip selects
+ * supporting external interfaces. One of the external chip selects is
+ * used for Flash, one is used for PCMCIA, and the other may be
+ * programmed to support either a synchronous interface or an
+ * asynchronous interface. The asynchronous interface can be used to
+ * support external devices such as UARTs and the BCM2019 Bluetooth
+ * baseband processor.
+ * The external interface core also contains 2 on-chip 16550 UARTs, clock
+ * frequency control, a watchdog interrupt timer, and a GPIO interface.
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, Michael Buesch
+ *
+ * Licensed under the GPL version 2. See COPYING for details.
+ */
+#ifndef LINUX_SSB_EXTIFCORE_H_
+#define LINUX_SSB_EXTIFCORE_H_
+
+/* external interface address space */
+#define SSB_EXTIF_PCMCIA_MEMBASE(x) (x)
+#define SSB_EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000)
+#define SSB_EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000)
+#define SSB_EXTIF_CFGIF_BASE(x) ((x) + 0x800000)
+#define SSB_EXTIF_FLASH_BASE(x) ((x) + 0xc00000)
+
+#define SSB_EXTIF_NR_GPIOOUT 5
+/* GPIO NOTE:
+ * The multiple instances of output and output enable registers
+ * are present to allow driver software for multiple cores to control
+ * gpio outputs without needing to share a single register pair.
+ * Use the following helper macro to get a register offset value.
+ */
+#define SSB_EXTIF_GPIO_OUT(index) ({ \
+ BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT); \
+ SSB_EXTIF_GPIO_OUT_BASE + ((index) * 8); \
+ })
+#define SSB_EXTIF_GPIO_OUTEN(index) ({ \
+ BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT); \
+ SSB_EXTIF_GPIO_OUTEN_BASE + ((index) * 8); \
+ })
+
+/** EXTIF core registers **/
+
+#define SSB_EXTIF_CTL 0x0000
+#define SSB_EXTIF_CTL_UARTEN (1 << 0) /* UART enable */
+#define SSB_EXTIF_EXTSTAT 0x0004
+#define SSB_EXTIF_EXTSTAT_EMODE (1 << 0) /* Endian mode (ro) */
+#define SSB_EXTIF_EXTSTAT_EIRQPIN (1 << 1) /* External interrupt pin (ro) */
+#define SSB_EXTIF_EXTSTAT_GPIOIRQPIN (1 << 2) /* GPIO interrupt pin (ro) */
+#define SSB_EXTIF_PCMCIA_CFG 0x0010
+#define SSB_EXTIF_PCMCIA_MEMWAIT 0x0014
+#define SSB_EXTIF_PCMCIA_ATTRWAIT 0x0018
+#define SSB_EXTIF_PCMCIA_IOWAIT 0x001C
+#define SSB_EXTIF_PROG_CFG 0x0020
+#define SSB_EXTIF_PROG_WAITCNT 0x0024
+#define SSB_EXTIF_FLASH_CFG 0x0028
+#define SSB_EXTIF_FLASH_WAITCNT 0x002C
+#define SSB_EXTIF_WATCHDOG 0x0040
+#define SSB_EXTIF_CLOCK_N 0x0044
+#define SSB_EXTIF_CLOCK_SB 0x0048
+#define SSB_EXTIF_CLOCK_PCI 0x004C
+#define SSB_EXTIF_CLOCK_MII 0x0050
+#define SSB_EXTIF_GPIO_IN 0x0060
+#define SSB_EXTIF_GPIO_OUT_BASE 0x0064
+#define SSB_EXTIF_GPIO_OUTEN_BASE 0x0068
+#define SSB_EXTIF_EJTAG_OUTEN 0x0090
+#define SSB_EXTIF_GPIO_INTPOL 0x0094
+#define SSB_EXTIF_GPIO_INTMASK 0x0098
+#define SSB_EXTIF_UART_DATA 0x0300
+#define SSB_EXTIF_UART_TIMER 0x0310
+#define SSB_EXTIF_UART_FCR 0x0320
+#define SSB_EXTIF_UART_LCR 0x0330
+#define SSB_EXTIF_UART_MCR 0x0340
+#define SSB_EXTIF_UART_LSR 0x0350
+#define SSB_EXTIF_UART_MSR 0x0360
+#define SSB_EXTIF_UART_SCRATCH 0x0370
+
+
+
+
+/* pcmcia/prog/flash_config */
+#define SSB_EXTCFG_EN (1 << 0) /* enable */
+#define SSB_EXTCFG_MODE 0xE /* mode */
+#define SSB_EXTCFG_MODE_SHIFT 1
+#define SSB_EXTCFG_MODE_FLASH 0x0 /* flash/asynchronous mode */
+#define SSB_EXTCFG_MODE_SYNC 0x2 /* synchronous mode */
+#define SSB_EXTCFG_MODE_PCMCIA 0x4 /* pcmcia mode */
+#define SSB_EXTCFG_DS16 (1 << 4) /* destsize: 0=8bit, 1=16bit */
+#define SSB_EXTCFG_BSWAP (1 << 5) /* byteswap */
+#define SSB_EXTCFG_CLKDIV 0xC0 /* clock divider */
+#define SSB_EXTCFG_CLKDIV_SHIFT 6
+#define SSB_EXTCFG_CLKDIV_2 0x0 /* backplane/2 */
+#define SSB_EXTCFG_CLKDIV_3 0x40 /* backplane/3 */
+#define SSB_EXTCFG_CLKDIV_4 0x80 /* backplane/4 */
+#define SSB_EXTCFG_CLKEN (1 << 8) /* clock enable */
+#define SSB_EXTCFG_STROBE (1 << 9) /* size/bytestrobe (synch only) */
+
+/* pcmcia_memwait */
+#define SSB_PCMCIA_MEMW_0 0x0000003F /* waitcount0 */
+#define SSB_PCMCIA_MEMW_1 0x00001F00 /* waitcount1 */
+#define SSB_PCMCIA_MEMW_1_SHIFT 8
+#define SSB_PCMCIA_MEMW_2 0x001F0000 /* waitcount2 */
+#define SSB_PCMCIA_MEMW_2_SHIFT 16
+#define SSB_PCMCIA_MEMW_3 0x1F000000 /* waitcount3 */
+#define SSB_PCMCIA_MEMW_3_SHIFT 24
+
+/* pcmcia_attrwait */
+#define SSB_PCMCIA_ATTW_0 0x0000003F /* waitcount0 */
+#define SSB_PCMCIA_ATTW_1 0x00001F00 /* waitcount1 */
+#define SSB_PCMCIA_ATTW_1_SHIFT 8
+#define SSB_PCMCIA_ATTW_2 0x001F0000 /* waitcount2 */
+#define SSB_PCMCIA_ATTW_2_SHIFT 16
+#define SSB_PCMCIA_ATTW_3 0x1F000000 /* waitcount3 */
+#define SSB_PCMCIA_ATTW_3_SHIFT 24
+
+/* pcmcia_iowait */
+#define SSB_PCMCIA_IOW_0 0x0000003F /* waitcount0 */
+#define SSB_PCMCIA_IOW_1 0x00001F00 /* waitcount1 */
+#define SSB_PCMCIA_IOW_1_SHIFT 8
+#define SSB_PCMCIA_IOW_2 0x001F0000 /* waitcount2 */
+#define SSB_PCMCIA_IOW_2_SHIFT 16
+#define SSB_PCMCIA_IOW_3 0x1F000000 /* waitcount3 */
+#define SSB_PCMCIA_IOW_3_SHIFT 24
+
+/* prog_waitcount */
+#define SSB_PROG_WCNT_0 0x0000001F /* waitcount0 */
+#define SSB_PROG_WCNT_1 0x00001F00 /* waitcount1 */
+#define SSB_PROG_WCNT_1_SHIFT 8
+#define SSB_PROG_WCNT_2 0x001F0000 /* waitcount2 */
+#define SSB_PROG_WCNT_2_SHIFT 16
+#define SSB_PROG_WCNT_3 0x1F000000 /* waitcount3 */
+#define SSB_PROG_WCNT_3_SHIFT 24
+
+#define SSB_PROG_W0 0x0000000C
+#define SSB_PROG_W1 0x00000A00
+#define SSB_PROG_W2 0x00020000
+#define SSB_PROG_W3 0x01000000
+
+/* flash_waitcount */
+#define SSB_FLASH_WCNT_0 0x0000001F /* waitcount0 */
+#define SSB_FLASH_WCNT_1 0x00001F00 /* waitcount1 */
+#define SSB_FLASH_WCNT_1_SHIFT 8
+#define SSB_FLASH_WCNT_2 0x001F0000 /* waitcount2 */
+#define SSB_FLASH_WCNT_2_SHIFT 16
+#define SSB_FLASH_WCNT_3 0x1F000000 /* waitcount3 */
+#define SSB_FLASH_WCNT_3_SHIFT 24
+
+/* watchdog */
+#define SSB_EXTIF_WATCHDOG_CLK 48000000 /* Hz */
+
+#define SSB_EXTIF_WATCHDOG_MAX_TIMER ((1 << 28) - 1)
+#define SSB_EXTIF_WATCHDOG_MAX_TIMER_MS (SSB_EXTIF_WATCHDOG_MAX_TIMER \
+ / (SSB_EXTIF_WATCHDOG_CLK / 1000))
+
+
+#ifdef CONFIG_SSB_DRIVER_EXTIF
+
+struct ssb_extif {
+ struct ssb_device *dev;
+ spinlock_t gpio_lock;
+};
+
+static inline bool ssb_extif_available(struct ssb_extif *extif)
+{
+ return (extif->dev != NULL);
+}
+
+extern void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
+ u32 *plltype, u32 *n, u32 *m);
+
+extern void ssb_extif_timing_init(struct ssb_extif *extif,
+ unsigned long ns);
+
+extern u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks);
+
+/* Extif GPIO pin access */
+u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask);
+u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value);
+u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value);
+u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value);
+u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value);
+
+#ifdef CONFIG_SSB_SERIAL
+extern int ssb_extif_serial_init(struct ssb_extif *extif,
+ struct ssb_serial_port *ports);
+#endif /* CONFIG_SSB_SERIAL */
+
+
+#else /* CONFIG_SSB_DRIVER_EXTIF */
+/* extif disabled */
+
+struct ssb_extif {
+};
+
+static inline bool ssb_extif_available(struct ssb_extif *extif)
+{
+ return 0;
+}
+
+static inline
+void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
+ u32 *plltype, u32 *n, u32 *m)
+{
+}
+
+static inline
+void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns)
+{
+}
+
+static inline
+u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks)
+{
+ return 0;
+}
+
+static inline u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask)
+{
+ return 0;
+}
+
+static inline u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask,
+ u32 value)
+{
+ return 0;
+}
+
+static inline u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask,
+ u32 value)
+{
+ return 0;
+}
+
+static inline u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask,
+ u32 value)
+{
+ return 0;
+}
+
+static inline u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask,
+ u32 value)
+{
+ return 0;
+}
+
+#ifdef CONFIG_SSB_SERIAL
+static inline int ssb_extif_serial_init(struct ssb_extif *extif,
+ struct ssb_serial_port *ports)
+{
+ return 0;
+}
+#endif /* CONFIG_SSB_SERIAL */
+
+#endif /* CONFIG_SSB_DRIVER_EXTIF */
+#endif /* LINUX_SSB_EXTIFCORE_H_ */