summaryrefslogtreecommitdiffstats
path: root/kernel/include/linux/spi
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/include/linux/spi')
-rw-r--r--kernel/include/linux/spi/ad7877.h24
-rw-r--r--kernel/include/linux/spi/ad7879.h41
-rw-r--r--kernel/include/linux/spi/adi_spi3.h254
-rw-r--r--kernel/include/linux/spi/ads7846.h61
-rw-r--r--kernel/include/linux/spi/at73c213.h25
-rw-r--r--kernel/include/linux/spi/at86rf230.h28
-rw-r--r--kernel/include/linux/spi/cc2520.h27
-rw-r--r--kernel/include/linux/spi/corgi_lcd.h20
-rw-r--r--kernel/include/linux/spi/ds1305.h35
-rw-r--r--kernel/include/linux/spi/eeprom.h38
-rw-r--r--kernel/include/linux/spi/flash.h31
-rw-r--r--kernel/include/linux/spi/ifx_modem.h19
-rw-r--r--kernel/include/linux/spi/l4f00242t03.h25
-rw-r--r--kernel/include/linux/spi/libertas_spi.h29
-rw-r--r--kernel/include/linux/spi/lms283gf05.h24
-rw-r--r--kernel/include/linux/spi/max7301.h35
-rw-r--r--kernel/include/linux/spi/mc33880.h10
-rw-r--r--kernel/include/linux/spi/mcp23s08.h43
-rw-r--r--kernel/include/linux/spi/mmc_spi.h64
-rw-r--r--kernel/include/linux/spi/mxs-spi.h144
-rw-r--r--kernel/include/linux/spi/pxa2xx_spi.h60
-rw-r--r--kernel/include/linux/spi/rspi.h26
-rw-r--r--kernel/include/linux/spi/s3c24xx.h28
-rw-r--r--kernel/include/linux/spi/sh_hspi.h19
-rw-r--r--kernel/include/linux/spi/sh_msiof.h14
-rw-r--r--kernel/include/linux/spi/spi.h1056
-rw-r--r--kernel/include/linux/spi/spi_bitbang.h47
-rw-r--r--kernel/include/linux/spi/spi_gpio.h71
-rw-r--r--kernel/include/linux/spi/spi_oc_tiny.h20
-rw-r--r--kernel/include/linux/spi/tdo24m.h13
-rw-r--r--kernel/include/linux/spi/tle62x0.h20
-rw-r--r--kernel/include/linux/spi/tsc2005.h34
-rw-r--r--kernel/include/linux/spi/xilinx_spi.h19
33 files changed, 2404 insertions, 0 deletions
diff --git a/kernel/include/linux/spi/ad7877.h b/kernel/include/linux/spi/ad7877.h
new file mode 100644
index 000000000..cdbed816f
--- /dev/null
+++ b/kernel/include/linux/spi/ad7877.h
@@ -0,0 +1,24 @@
+/* linux/spi/ad7877.h */
+
+/* Touchscreen characteristics vary between boards and models. The
+ * platform_data for the device's "struct device" holds this information.
+ *
+ * It's OK if the min/max values are zero.
+ */
+struct ad7877_platform_data {
+ u16 model; /* 7877 */
+ u16 vref_delay_usecs; /* 0 for external vref; etc */
+ u16 x_plate_ohms;
+ u16 y_plate_ohms;
+
+ u16 x_min, x_max;
+ u16 y_min, y_max;
+ u16 pressure_min, pressure_max;
+
+ u8 stopacq_polarity; /* 1 = Active HIGH, 0 = Active LOW */
+ u8 first_conversion_delay; /* 0 = 0.5us, 1 = 128us, 2 = 1ms, 3 = 8ms */
+ u8 acquisition_time; /* 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */
+ u8 averaging; /* 0 = 1, 1 = 4, 2 = 8, 3 = 16 */
+ u8 pen_down_acc_interval; /* 0 = covert once, 1 = every 0.5 ms,
+ 2 = ever 1 ms, 3 = every 8 ms,*/
+};
diff --git a/kernel/include/linux/spi/ad7879.h b/kernel/include/linux/spi/ad7879.h
new file mode 100644
index 000000000..58368be0b
--- /dev/null
+++ b/kernel/include/linux/spi/ad7879.h
@@ -0,0 +1,41 @@
+/* linux/spi/ad7879.h */
+
+/* Touchscreen characteristics vary between boards and models. The
+ * platform_data for the device's "struct device" holds this information.
+ *
+ * It's OK if the min/max values are zero.
+ */
+struct ad7879_platform_data {
+ u16 model; /* 7879 */
+ u16 x_plate_ohms;
+ u16 x_min, x_max;
+ u16 y_min, y_max;
+ u16 pressure_min, pressure_max;
+
+ bool swap_xy; /* swap x and y axes */
+
+ /* [0..255] 0=OFF Starts at 1=550us and goes
+ * all the way to 9.440ms in steps of 35us.
+ */
+ u8 pen_down_acc_interval;
+ /* [0..15] Starts at 0=128us and goes all the
+ * way to 4.096ms in steps of 128us.
+ */
+ u8 first_conversion_delay;
+ /* [0..3] 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */
+ u8 acquisition_time;
+ /* [0..3] Average X middle samples 0 = 2, 1 = 4, 2 = 8, 3 = 16 */
+ u8 averaging;
+ /* [0..3] Perform X measurements 0 = OFF,
+ * 1 = 4, 2 = 8, 3 = 16 (median > averaging)
+ */
+ u8 median;
+ /* 1 = AUX/VBAT/GPIO export GPIO to gpiolib
+ * requires CONFIG_GPIOLIB
+ */
+ bool gpio_export;
+ /* identifies the first GPIO number handled by this chip;
+ * or, if negative, requests dynamic ID allocation.
+ */
+ s32 gpio_base;
+};
diff --git a/kernel/include/linux/spi/adi_spi3.h b/kernel/include/linux/spi/adi_spi3.h
new file mode 100644
index 000000000..c84123aa1
--- /dev/null
+++ b/kernel/include/linux/spi/adi_spi3.h
@@ -0,0 +1,254 @@
+/*
+ * Analog Devices SPI3 controller driver
+ *
+ * Copyright (c) 2014 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _ADI_SPI3_H_
+#define _ADI_SPI3_H_
+
+#include <linux/types.h>
+
+/* SPI_CONTROL */
+#define SPI_CTL_EN 0x00000001 /* Enable */
+#define SPI_CTL_MSTR 0x00000002 /* Master/Slave */
+#define SPI_CTL_PSSE 0x00000004 /* controls modf error in master mode */
+#define SPI_CTL_ODM 0x00000008 /* Open Drain Mode */
+#define SPI_CTL_CPHA 0x00000010 /* Clock Phase */
+#define SPI_CTL_CPOL 0x00000020 /* Clock Polarity */
+#define SPI_CTL_ASSEL 0x00000040 /* Slave Select Pin Control */
+#define SPI_CTL_SELST 0x00000080 /* Slave Select Polarity in-between transfers */
+#define SPI_CTL_EMISO 0x00000100 /* Enable MISO */
+#define SPI_CTL_SIZE 0x00000600 /* Word Transfer Size */
+#define SPI_CTL_SIZE08 0x00000000 /* SIZE: 8 bits */
+#define SPI_CTL_SIZE16 0x00000200 /* SIZE: 16 bits */
+#define SPI_CTL_SIZE32 0x00000400 /* SIZE: 32 bits */
+#define SPI_CTL_LSBF 0x00001000 /* LSB First */
+#define SPI_CTL_FCEN 0x00002000 /* Flow-Control Enable */
+#define SPI_CTL_FCCH 0x00004000 /* Flow-Control Channel Selection */
+#define SPI_CTL_FCPL 0x00008000 /* Flow-Control Polarity */
+#define SPI_CTL_FCWM 0x00030000 /* Flow-Control Water-Mark */
+#define SPI_CTL_FIFO0 0x00000000 /* FCWM: TFIFO empty or RFIFO Full */
+#define SPI_CTL_FIFO1 0x00010000 /* FCWM: TFIFO 75% or more empty or RFIFO 75% or more full */
+#define SPI_CTL_FIFO2 0x00020000 /* FCWM: TFIFO 50% or more empty or RFIFO 50% or more full */
+#define SPI_CTL_FMODE 0x00040000 /* Fast-mode Enable */
+#define SPI_CTL_MIOM 0x00300000 /* Multiple I/O Mode */
+#define SPI_CTL_MIO_DIS 0x00000000 /* MIOM: Disable */
+#define SPI_CTL_MIO_DUAL 0x00100000 /* MIOM: Enable DIOM (Dual I/O Mode) */
+#define SPI_CTL_MIO_QUAD 0x00200000 /* MIOM: Enable QUAD (Quad SPI Mode) */
+#define SPI_CTL_SOSI 0x00400000 /* Start on MOSI */
+/* SPI_RX_CONTROL */
+#define SPI_RXCTL_REN 0x00000001 /* Receive Channel Enable */
+#define SPI_RXCTL_RTI 0x00000004 /* Receive Transfer Initiate */
+#define SPI_RXCTL_RWCEN 0x00000008 /* Receive Word Counter Enable */
+#define SPI_RXCTL_RDR 0x00000070 /* Receive Data Request */
+#define SPI_RXCTL_RDR_DIS 0x00000000 /* RDR: Disabled */
+#define SPI_RXCTL_RDR_NE 0x00000010 /* RDR: RFIFO not empty */
+#define SPI_RXCTL_RDR_25 0x00000020 /* RDR: RFIFO 25% full */
+#define SPI_RXCTL_RDR_50 0x00000030 /* RDR: RFIFO 50% full */
+#define SPI_RXCTL_RDR_75 0x00000040 /* RDR: RFIFO 75% full */
+#define SPI_RXCTL_RDR_FULL 0x00000050 /* RDR: RFIFO full */
+#define SPI_RXCTL_RDO 0x00000100 /* Receive Data Over-Run */
+#define SPI_RXCTL_RRWM 0x00003000 /* FIFO Regular Water-Mark */
+#define SPI_RXCTL_RWM_0 0x00000000 /* RRWM: RFIFO Empty */
+#define SPI_RXCTL_RWM_25 0x00001000 /* RRWM: RFIFO 25% full */
+#define SPI_RXCTL_RWM_50 0x00002000 /* RRWM: RFIFO 50% full */
+#define SPI_RXCTL_RWM_75 0x00003000 /* RRWM: RFIFO 75% full */
+#define SPI_RXCTL_RUWM 0x00070000 /* FIFO Urgent Water-Mark */
+#define SPI_RXCTL_UWM_DIS 0x00000000 /* RUWM: Disabled */
+#define SPI_RXCTL_UWM_25 0x00010000 /* RUWM: RFIFO 25% full */
+#define SPI_RXCTL_UWM_50 0x00020000 /* RUWM: RFIFO 50% full */
+#define SPI_RXCTL_UWM_75 0x00030000 /* RUWM: RFIFO 75% full */
+#define SPI_RXCTL_UWM_FULL 0x00040000 /* RUWM: RFIFO full */
+/* SPI_TX_CONTROL */
+#define SPI_TXCTL_TEN 0x00000001 /* Transmit Channel Enable */
+#define SPI_TXCTL_TTI 0x00000004 /* Transmit Transfer Initiate */
+#define SPI_TXCTL_TWCEN 0x00000008 /* Transmit Word Counter Enable */
+#define SPI_TXCTL_TDR 0x00000070 /* Transmit Data Request */
+#define SPI_TXCTL_TDR_DIS 0x00000000 /* TDR: Disabled */
+#define SPI_TXCTL_TDR_NF 0x00000010 /* TDR: TFIFO not full */
+#define SPI_TXCTL_TDR_25 0x00000020 /* TDR: TFIFO 25% empty */
+#define SPI_TXCTL_TDR_50 0x00000030 /* TDR: TFIFO 50% empty */
+#define SPI_TXCTL_TDR_75 0x00000040 /* TDR: TFIFO 75% empty */
+#define SPI_TXCTL_TDR_EMPTY 0x00000050 /* TDR: TFIFO empty */
+#define SPI_TXCTL_TDU 0x00000100 /* Transmit Data Under-Run */
+#define SPI_TXCTL_TRWM 0x00003000 /* FIFO Regular Water-Mark */
+#define SPI_TXCTL_RWM_FULL 0x00000000 /* TRWM: TFIFO full */
+#define SPI_TXCTL_RWM_25 0x00001000 /* TRWM: TFIFO 25% empty */
+#define SPI_TXCTL_RWM_50 0x00002000 /* TRWM: TFIFO 50% empty */
+#define SPI_TXCTL_RWM_75 0x00003000 /* TRWM: TFIFO 75% empty */
+#define SPI_TXCTL_TUWM 0x00070000 /* FIFO Urgent Water-Mark */
+#define SPI_TXCTL_UWM_DIS 0x00000000 /* TUWM: Disabled */
+#define SPI_TXCTL_UWM_25 0x00010000 /* TUWM: TFIFO 25% empty */
+#define SPI_TXCTL_UWM_50 0x00020000 /* TUWM: TFIFO 50% empty */
+#define SPI_TXCTL_UWM_75 0x00030000 /* TUWM: TFIFO 75% empty */
+#define SPI_TXCTL_UWM_EMPTY 0x00040000 /* TUWM: TFIFO empty */
+/* SPI_CLOCK */
+#define SPI_CLK_BAUD 0x0000FFFF /* Baud Rate */
+/* SPI_DELAY */
+#define SPI_DLY_STOP 0x000000FF /* Transfer delay time in multiples of SCK period */
+#define SPI_DLY_LEADX 0x00000100 /* Extended (1 SCK) LEAD Control */
+#define SPI_DLY_LAGX 0x00000200 /* Extended (1 SCK) LAG control */
+/* SPI_SSEL */
+#define SPI_SLVSEL_SSE1 0x00000002 /* SPISSEL1 Enable */
+#define SPI_SLVSEL_SSE2 0x00000004 /* SPISSEL2 Enable */
+#define SPI_SLVSEL_SSE3 0x00000008 /* SPISSEL3 Enable */
+#define SPI_SLVSEL_SSE4 0x00000010 /* SPISSEL4 Enable */
+#define SPI_SLVSEL_SSE5 0x00000020 /* SPISSEL5 Enable */
+#define SPI_SLVSEL_SSE6 0x00000040 /* SPISSEL6 Enable */
+#define SPI_SLVSEL_SSE7 0x00000080 /* SPISSEL7 Enable */
+#define SPI_SLVSEL_SSEL1 0x00000200 /* SPISSEL1 Value */
+#define SPI_SLVSEL_SSEL2 0x00000400 /* SPISSEL2 Value */
+#define SPI_SLVSEL_SSEL3 0x00000800 /* SPISSEL3 Value */
+#define SPI_SLVSEL_SSEL4 0x00001000 /* SPISSEL4 Value */
+#define SPI_SLVSEL_SSEL5 0x00002000 /* SPISSEL5 Value */
+#define SPI_SLVSEL_SSEL6 0x00004000 /* SPISSEL6 Value */
+#define SPI_SLVSEL_SSEL7 0x00008000 /* SPISSEL7 Value */
+/* SPI_RWC */
+#define SPI_RWC_VALUE 0x0000FFFF /* Received Word-Count */
+/* SPI_RWCR */
+#define SPI_RWCR_VALUE 0x0000FFFF /* Received Word-Count Reload */
+/* SPI_TWC */
+#define SPI_TWC_VALUE 0x0000FFFF /* Transmitted Word-Count */
+/* SPI_TWCR */
+#define SPI_TWCR_VALUE 0x0000FFFF /* Transmitted Word-Count Reload */
+/* SPI_IMASK */
+#define SPI_IMSK_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */
+#define SPI_IMSK_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */
+#define SPI_IMSK_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */
+#define SPI_IMSK_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */
+#define SPI_IMSK_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */
+#define SPI_IMSK_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */
+#define SPI_IMSK_RSM 0x00000100 /* Receive Start Interrupt Mask */
+#define SPI_IMSK_TSM 0x00000200 /* Transmit Start Interrupt Mask */
+#define SPI_IMSK_RFM 0x00000400 /* Receive Finish Interrupt Mask */
+#define SPI_IMSK_TFM 0x00000800 /* Transmit Finish Interrupt Mask */
+/* SPI_IMASKCL */
+#define SPI_IMSK_CLR_RUW 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */
+#define SPI_IMSK_CLR_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */
+#define SPI_IMSK_CLR_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */
+#define SPI_IMSK_CLR_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */
+#define SPI_IMSK_CLR_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */
+#define SPI_IMSK_CLR_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */
+#define SPI_IMSK_CLR_RSM 0x00000100 /* Receive Start Interrupt Mask */
+#define SPI_IMSK_CLR_TSM 0x00000200 /* Transmit Start Interrupt Mask */
+#define SPI_IMSK_CLR_RFM 0x00000400 /* Receive Finish Interrupt Mask */
+#define SPI_IMSK_CLR_TFM 0x00000800 /* Transmit Finish Interrupt Mask */
+/* SPI_IMASKST */
+#define SPI_IMSK_SET_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */
+#define SPI_IMSK_SET_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */
+#define SPI_IMSK_SET_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */
+#define SPI_IMSK_SET_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */
+#define SPI_IMSK_SET_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */
+#define SPI_IMSK_SET_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */
+#define SPI_IMSK_SET_RSM 0x00000100 /* Receive Start Interrupt Mask */
+#define SPI_IMSK_SET_TSM 0x00000200 /* Transmit Start Interrupt Mask */
+#define SPI_IMSK_SET_RFM 0x00000400 /* Receive Finish Interrupt Mask */
+#define SPI_IMSK_SET_TFM 0x00000800 /* Transmit Finish Interrupt Mask */
+/* SPI_STATUS */
+#define SPI_STAT_SPIF 0x00000001 /* SPI Finished */
+#define SPI_STAT_RUWM 0x00000002 /* Receive Urgent Water-Mark Breached */
+#define SPI_STAT_TUWM 0x00000004 /* Transmit Urgent Water-Mark Breached */
+#define SPI_STAT_ROE 0x00000010 /* Receive Over-Run Error Indication */
+#define SPI_STAT_TUE 0x00000020 /* Transmit Under-Run Error Indication */
+#define SPI_STAT_TCE 0x00000040 /* Transmit Collision Error Indication */
+#define SPI_STAT_MODF 0x00000080 /* Mode Fault Error Indication */
+#define SPI_STAT_RS 0x00000100 /* Receive Start Indication */
+#define SPI_STAT_TS 0x00000200 /* Transmit Start Indication */
+#define SPI_STAT_RF 0x00000400 /* Receive Finish Indication */
+#define SPI_STAT_TF 0x00000800 /* Transmit Finish Indication */
+#define SPI_STAT_RFS 0x00007000 /* SPI_RFIFO status */
+#define SPI_STAT_RFIFO_EMPTY 0x00000000 /* RFS: RFIFO Empty */
+#define SPI_STAT_RFIFO_25 0x00001000 /* RFS: RFIFO 25% Full */
+#define SPI_STAT_RFIFO_50 0x00002000 /* RFS: RFIFO 50% Full */
+#define SPI_STAT_RFIFO_75 0x00003000 /* RFS: RFIFO 75% Full */
+#define SPI_STAT_RFIFO_FULL 0x00004000 /* RFS: RFIFO Full */
+#define SPI_STAT_TFS 0x00070000 /* SPI_TFIFO status */
+#define SPI_STAT_TFIFO_FULL 0x00000000 /* TFS: TFIFO full */
+#define SPI_STAT_TFIFO_25 0x00010000 /* TFS: TFIFO 25% empty */
+#define SPI_STAT_TFIFO_50 0x00020000 /* TFS: TFIFO 50% empty */
+#define SPI_STAT_TFIFO_75 0x00030000 /* TFS: TFIFO 75% empty */
+#define SPI_STAT_TFIFO_EMPTY 0x00040000 /* TFS: TFIFO empty */
+#define SPI_STAT_FCS 0x00100000 /* Flow-Control Stall Indication */
+#define SPI_STAT_RFE 0x00400000 /* SPI_RFIFO Empty */
+#define SPI_STAT_TFF 0x00800000 /* SPI_TFIFO Full */
+/* SPI_ILAT */
+#define SPI_ILAT_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */
+#define SPI_ILAT_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */
+#define SPI_ILAT_ROI 0x00000010 /* Receive Over-Run Error Indication */
+#define SPI_ILAT_TUI 0x00000020 /* Transmit Under-Run Error Indication */
+#define SPI_ILAT_TCI 0x00000040 /* Transmit Collision Error Indication */
+#define SPI_ILAT_MFI 0x00000080 /* Mode Fault Error Indication */
+#define SPI_ILAT_RSI 0x00000100 /* Receive Start Indication */
+#define SPI_ILAT_TSI 0x00000200 /* Transmit Start Indication */
+#define SPI_ILAT_RFI 0x00000400 /* Receive Finish Indication */
+#define SPI_ILAT_TFI 0x00000800 /* Transmit Finish Indication */
+/* SPI_ILATCL */
+#define SPI_ILAT_CLR_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */
+#define SPI_ILAT_CLR_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */
+#define SPI_ILAT_CLR_ROI 0x00000010 /* Receive Over-Run Error Indication */
+#define SPI_ILAT_CLR_TUI 0x00000020 /* Transmit Under-Run Error Indication */
+#define SPI_ILAT_CLR_TCI 0x00000040 /* Transmit Collision Error Indication */
+#define SPI_ILAT_CLR_MFI 0x00000080 /* Mode Fault Error Indication */
+#define SPI_ILAT_CLR_RSI 0x00000100 /* Receive Start Indication */
+#define SPI_ILAT_CLR_TSI 0x00000200 /* Transmit Start Indication */
+#define SPI_ILAT_CLR_RFI 0x00000400 /* Receive Finish Indication */
+#define SPI_ILAT_CLR_TFI 0x00000800 /* Transmit Finish Indication */
+
+/*
+ * adi spi3 registers layout
+ */
+struct adi_spi_regs {
+ u32 revid;
+ u32 control;
+ u32 rx_control;
+ u32 tx_control;
+ u32 clock;
+ u32 delay;
+ u32 ssel;
+ u32 rwc;
+ u32 rwcr;
+ u32 twc;
+ u32 twcr;
+ u32 reserved0;
+ u32 emask;
+ u32 emaskcl;
+ u32 emaskst;
+ u32 reserved1;
+ u32 status;
+ u32 elat;
+ u32 elatcl;
+ u32 reserved2;
+ u32 rfifo;
+ u32 reserved3;
+ u32 tfifo;
+};
+
+#define MAX_CTRL_CS 8 /* cs in spi controller */
+
+/* device.platform_data for SSP controller devices */
+struct adi_spi3_master {
+ u16 num_chipselect;
+ u16 pin_req[7];
+};
+
+/* spi_board_info.controller_data for SPI slave devices,
+ * copied to spi_device.platform_data ... mostly for dma tuning
+ */
+struct adi_spi3_chip {
+ u32 control;
+ u16 cs_chg_udelay; /* Some devices require 16-bit delays */
+ u32 tx_dummy_val; /* tx value for rx only transfer */
+ bool enable_dma;
+};
+
+#endif /* _ADI_SPI3_H_ */
diff --git a/kernel/include/linux/spi/ads7846.h b/kernel/include/linux/spi/ads7846.h
new file mode 100644
index 000000000..2f694f384
--- /dev/null
+++ b/kernel/include/linux/spi/ads7846.h
@@ -0,0 +1,61 @@
+/* linux/spi/ads7846.h */
+
+/* Touchscreen characteristics vary between boards and models. The
+ * platform_data for the device's "struct device" holds this information.
+ *
+ * It's OK if the min/max values are zero.
+ */
+enum ads7846_filter {
+ ADS7846_FILTER_OK,
+ ADS7846_FILTER_REPEAT,
+ ADS7846_FILTER_IGNORE,
+};
+
+struct ads7846_platform_data {
+ u16 model; /* 7843, 7845, 7846, 7873. */
+ u16 vref_delay_usecs; /* 0 for external vref; etc */
+ u16 vref_mv; /* external vref value, milliVolts
+ * ads7846: if 0, use internal vref */
+ bool keep_vref_on; /* set to keep vref on for differential
+ * measurements as well */
+ bool swap_xy; /* swap x and y axes */
+
+ /* Settling time of the analog signals; a function of Vcc and the
+ * capacitance on the X/Y drivers. If set to non-zero, two samples
+ * are taken with settle_delay us apart, and the second one is used.
+ * ~150 uSec with 0.01uF caps.
+ */
+ u16 settle_delay_usecs;
+
+ /* If set to non-zero, after samples are taken this delay is applied
+ * and penirq is rechecked, to help avoid false events. This value
+ * is affected by the material used to build the touch layer.
+ */
+ u16 penirq_recheck_delay_usecs;
+
+ u16 x_plate_ohms;
+ u16 y_plate_ohms;
+
+ u16 x_min, x_max;
+ u16 y_min, y_max;
+ u16 pressure_min, pressure_max;
+
+ u16 debounce_max; /* max number of additional readings
+ * per sample */
+ u16 debounce_tol; /* tolerance used for filtering */
+ u16 debounce_rep; /* additional consecutive good readings
+ * required after the first two */
+ int gpio_pendown; /* the GPIO used to decide the pendown
+ * state if get_pendown_state == NULL */
+ int gpio_pendown_debounce; /* platform specific debounce time for
+ * the gpio_pendown */
+ int (*get_pendown_state)(void);
+ int (*filter_init) (const struct ads7846_platform_data *pdata,
+ void **filter_data);
+ int (*filter) (void *filter_data, int data_idx, int *val);
+ void (*filter_cleanup)(void *filter_data);
+ void (*wait_for_sync)(void);
+ bool wakeup;
+ unsigned long irq_flags;
+};
+
diff --git a/kernel/include/linux/spi/at73c213.h b/kernel/include/linux/spi/at73c213.h
new file mode 100644
index 000000000..0f20a70e5
--- /dev/null
+++ b/kernel/include/linux/spi/at73c213.h
@@ -0,0 +1,25 @@
+/*
+ * Board-specific data used to set up AT73c213 audio DAC driver.
+ */
+
+#ifndef __LINUX_SPI_AT73C213_H
+#define __LINUX_SPI_AT73C213_H
+
+/**
+ * at73c213_board_info - how the external DAC is wired to the device.
+ *
+ * @ssc_id: SSC platform_driver id the DAC shall use to stream the audio.
+ * @dac_clk: the external clock used to provide master clock to the DAC.
+ * @shortname: a short discription for the DAC, seen by userspace tools.
+ *
+ * This struct contains the configuration of the hardware connection to the
+ * external DAC. The DAC needs a master clock and a I2S audio stream. It also
+ * provides a name which is used to identify it in userspace tools.
+ */
+struct at73c213_board_info {
+ int ssc_id;
+ struct clk *dac_clk;
+ char shortname[32];
+};
+
+#endif /* __LINUX_SPI_AT73C213_H */
diff --git a/kernel/include/linux/spi/at86rf230.h b/kernel/include/linux/spi/at86rf230.h
new file mode 100644
index 000000000..b63fe6f5f
--- /dev/null
+++ b/kernel/include/linux/spi/at86rf230.h
@@ -0,0 +1,28 @@
+/*
+ * AT86RF230/RF231 driver
+ *
+ * Copyright (C) 2009-2012 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Written by:
+ * Dmitry Eremin-Solenikov <dmitry.baryshkov@siemens.com>
+ */
+#ifndef AT86RF230_H
+#define AT86RF230_H
+
+struct at86rf230_platform_data {
+ int rstn;
+ int slp_tr;
+ int dig2;
+ u8 xtal_trim;
+};
+
+#endif
diff --git a/kernel/include/linux/spi/cc2520.h b/kernel/include/linux/spi/cc2520.h
new file mode 100644
index 000000000..e741e8baa
--- /dev/null
+++ b/kernel/include/linux/spi/cc2520.h
@@ -0,0 +1,27 @@
+/* Header file for cc2520 radio driver
+ *
+ * Copyright (C) 2014 Varka Bhadram <varkab@cdac.in>
+ * Md.Jamal Mohiuddin <mjmohiuddin@cdac.in>
+ * P Sowjanya <sowjanyap@cdac.in>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __CC2520_H
+#define __CC2520_H
+
+struct cc2520_platform_data {
+ int fifo;
+ int fifop;
+ int cca;
+ int sfd;
+ int reset;
+ int vreg;
+ bool amplified;
+};
+
+#endif
diff --git a/kernel/include/linux/spi/corgi_lcd.h b/kernel/include/linux/spi/corgi_lcd.h
new file mode 100644
index 000000000..6692b3418
--- /dev/null
+++ b/kernel/include/linux/spi/corgi_lcd.h
@@ -0,0 +1,20 @@
+#ifndef __LINUX_SPI_CORGI_LCD_H
+#define __LINUX_SPI_CORGI_LCD_H
+
+#define CORGI_LCD_MODE_QVGA 1
+#define CORGI_LCD_MODE_VGA 2
+
+struct corgi_lcd_platform_data {
+ int init_mode;
+ int max_intensity;
+ int default_intensity;
+ int limit_mask;
+
+ int gpio_backlight_on; /* -1 if n/a */
+ int gpio_backlight_cont; /* -1 if n/a */
+
+ void (*notify)(int intensity);
+ void (*kick_battery)(void);
+};
+
+#endif /* __LINUX_SPI_CORGI_LCD_H */
diff --git a/kernel/include/linux/spi/ds1305.h b/kernel/include/linux/spi/ds1305.h
new file mode 100644
index 000000000..287ec830e
--- /dev/null
+++ b/kernel/include/linux/spi/ds1305.h
@@ -0,0 +1,35 @@
+#ifndef __LINUX_SPI_DS1305_H
+#define __LINUX_SPI_DS1305_H
+
+/*
+ * One-time configuration for ds1305 and ds1306 RTC chips.
+ *
+ * Put a pointer to this in spi_board_info.platform_data if you want to
+ * be sure that Linux (re)initializes this as needed ... after losing
+ * backup power, and potentially on the first boot.
+ */
+struct ds1305_platform_data {
+
+ /* Trickle charge configuration: it's OK to leave out the MAGIC
+ * bitmask; mask in either DS1 or DS2, and then one of 2K/4k/8K.
+ */
+#define DS1305_TRICKLE_MAGIC 0xa0
+#define DS1305_TRICKLE_DS2 0x08 /* two diodes */
+#define DS1305_TRICKLE_DS1 0x04 /* one diode */
+#define DS1305_TRICKLE_2K 0x01 /* 2 KOhm resistance */
+#define DS1305_TRICKLE_4K 0x02 /* 4 KOhm resistance */
+#define DS1305_TRICKLE_8K 0x03 /* 8 KOhm resistance */
+ u8 trickle;
+
+ /* set only on ds1306 parts */
+ bool is_ds1306;
+
+ /* ds1306 only: enable 1 Hz output */
+ bool en_1hz;
+
+ /* REVISIT: the driver currently expects nINT0 to be wired
+ * as the alarm IRQ. ALM1 may also need to be set up ...
+ */
+};
+
+#endif /* __LINUX_SPI_DS1305_H */
diff --git a/kernel/include/linux/spi/eeprom.h b/kernel/include/linux/spi/eeprom.h
new file mode 100644
index 000000000..403e007ae
--- /dev/null
+++ b/kernel/include/linux/spi/eeprom.h
@@ -0,0 +1,38 @@
+#ifndef __LINUX_SPI_EEPROM_H
+#define __LINUX_SPI_EEPROM_H
+
+#include <linux/memory.h>
+
+/*
+ * Put one of these structures in platform_data for SPI EEPROMS handled
+ * by the "at25" driver. On SPI, most EEPROMS understand the same core
+ * command set. If you need to support EEPROMs that don't yet fit, add
+ * flags to support those protocol options. These values all come from
+ * the chip datasheets.
+ */
+struct spi_eeprom {
+ u32 byte_len;
+ char name[10];
+ u16 page_size; /* for writes */
+ u16 flags;
+#define EE_ADDR1 0x0001 /* 8 bit addrs */
+#define EE_ADDR2 0x0002 /* 16 bit addrs */
+#define EE_ADDR3 0x0004 /* 24 bit addrs */
+#define EE_READONLY 0x0008 /* disallow writes */
+
+ /*
+ * Certain EEPROMS have a size that is larger than the number of address
+ * bytes would allow (e.g. like M95040 from ST that has 512 Byte size
+ * but uses only one address byte (A0 to A7) for addressing.) For
+ * the extra address bit (A8, A16 or A24) bit 3 of the instruction byte
+ * is used. This instruction bit is normally defined as don't care for
+ * other AT25 like chips.
+ */
+#define EE_INSTR_BIT3_IS_ADDR 0x0010
+
+ /* for exporting this chip's data to other kernel code */
+ void (*setup)(struct memory_accessor *mem, void *context);
+ void *context;
+};
+
+#endif /* __LINUX_SPI_EEPROM_H */
diff --git a/kernel/include/linux/spi/flash.h b/kernel/include/linux/spi/flash.h
new file mode 100644
index 000000000..3f22932e6
--- /dev/null
+++ b/kernel/include/linux/spi/flash.h
@@ -0,0 +1,31 @@
+#ifndef LINUX_SPI_FLASH_H
+#define LINUX_SPI_FLASH_H
+
+struct mtd_partition;
+
+/**
+ * struct flash_platform_data: board-specific flash data
+ * @name: optional flash device name (eg, as used with mtdparts=)
+ * @parts: optional array of mtd_partitions for static partitioning
+ * @nr_parts: number of mtd_partitions for static partitoning
+ * @type: optional flash device type (e.g. m25p80 vs m25p64), for use
+ * with chips that can't be queried for JEDEC or other IDs
+ *
+ * Board init code (in arch/.../mach-xxx/board-yyy.c files) can
+ * provide information about SPI flash parts (such as DataFlash) to
+ * help set up the device and its appropriate default partitioning.
+ *
+ * Note that for DataFlash, sizes for pages, blocks, and sectors are
+ * rarely powers of two; and partitions should be sector-aligned.
+ */
+struct flash_platform_data {
+ char *name;
+ struct mtd_partition *parts;
+ unsigned int nr_parts;
+
+ char *type;
+
+ /* we'll likely add more ... use JEDEC IDs, etc */
+};
+
+#endif
diff --git a/kernel/include/linux/spi/ifx_modem.h b/kernel/include/linux/spi/ifx_modem.h
new file mode 100644
index 000000000..394fec9e7
--- /dev/null
+++ b/kernel/include/linux/spi/ifx_modem.h
@@ -0,0 +1,19 @@
+#ifndef LINUX_IFX_MODEM_H
+#define LINUX_IFX_MODEM_H
+
+struct ifx_modem_platform_data {
+ unsigned short rst_out; /* modem reset out */
+ unsigned short pwr_on; /* power on */
+ unsigned short rst_pmu; /* reset modem */
+ unsigned short tx_pwr; /* modem power threshold */
+ unsigned short srdy; /* SRDY */
+ unsigned short mrdy; /* MRDY */
+ unsigned char modem_type; /* Modem type */
+ unsigned long max_hz; /* max SPI frequency */
+ unsigned short use_dma:1; /* spi protocol driver supplies
+ dma-able addrs */
+};
+#define IFX_MODEM_6160 1
+#define IFX_MODEM_6260 2
+
+#endif
diff --git a/kernel/include/linux/spi/l4f00242t03.h b/kernel/include/linux/spi/l4f00242t03.h
new file mode 100644
index 000000000..e69e9b51b
--- /dev/null
+++ b/kernel/include/linux/spi/l4f00242t03.h
@@ -0,0 +1,25 @@
+/*
+ * l4f00242t03.h -- Platform glue for Epson L4F00242T03 LCD
+ *
+ * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * Based on Marek Vasut work in lms283gf05.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+*/
+
+#ifndef _INCLUDE_LINUX_SPI_L4F00242T03_H_
+#define _INCLUDE_LINUX_SPI_L4F00242T03_H_
+
+struct l4f00242t03_pdata {
+ unsigned int reset_gpio;
+ unsigned int data_enable_gpio;
+};
+
+#endif /* _INCLUDE_LINUX_SPI_L4F00242T03_H_ */
diff --git a/kernel/include/linux/spi/libertas_spi.h b/kernel/include/linux/spi/libertas_spi.h
new file mode 100644
index 000000000..1b5d5384f
--- /dev/null
+++ b/kernel/include/linux/spi/libertas_spi.h
@@ -0,0 +1,29 @@
+/*
+ * board-specific data for the libertas_spi driver.
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#ifndef _LIBERTAS_SPI_H_
+#define _LIBERTAS_SPI_H_
+
+struct spi_device;
+
+struct libertas_spi_platform_data {
+ /* There are two ways to read data from the WLAN module's SPI
+ * interface. Setting 0 or 1 here controls which one is used.
+ *
+ * Usually you want to set use_dummy_writes = 1.
+ * However, if that doesn't work or if you are using a slow SPI clock
+ * speed, you may want to use 0 here. */
+ u16 use_dummy_writes;
+
+ /* Board specific setup/teardown */
+ int (*setup)(struct spi_device *spi);
+ int (*teardown)(struct spi_device *spi);
+};
+#endif
diff --git a/kernel/include/linux/spi/lms283gf05.h b/kernel/include/linux/spi/lms283gf05.h
new file mode 100644
index 000000000..fdd1d1d51
--- /dev/null
+++ b/kernel/include/linux/spi/lms283gf05.h
@@ -0,0 +1,24 @@
+/*
+ * lms283gf05.h - Platform glue for Samsung LMS283GF05 LCD
+ *
+ * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+*/
+
+#ifndef _INCLUDE_LINUX_SPI_LMS283GF05_H_
+#define _INCLUDE_LINUX_SPI_LMS283GF05_H_
+
+struct lms283gf05_pdata {
+ unsigned long reset_gpio;
+ bool reset_inverted;
+};
+
+#endif /* _INCLUDE_LINUX_SPI_LMS283GF05_H_ */
diff --git a/kernel/include/linux/spi/max7301.h b/kernel/include/linux/spi/max7301.h
new file mode 100644
index 000000000..bcaa2f762
--- /dev/null
+++ b/kernel/include/linux/spi/max7301.h
@@ -0,0 +1,35 @@
+#ifndef LINUX_SPI_MAX7301_H
+#define LINUX_SPI_MAX7301_H
+
+#include <linux/gpio.h>
+
+/*
+ * Some registers must be read back to modify.
+ * To save time we cache them here in memory
+ */
+struct max7301 {
+ struct mutex lock;
+ u8 port_config[8]; /* field 0 is unused */
+ u32 out_level; /* cached output levels */
+ u32 input_pullup_active;
+ struct gpio_chip chip;
+ struct device *dev;
+ int (*write)(struct device *dev, unsigned int reg, unsigned int val);
+ int (*read)(struct device *dev, unsigned int reg);
+};
+
+struct max7301_platform_data {
+ /* number assigned to the first GPIO */
+ unsigned base;
+ /*
+ * bitmask controlling the pullup configuration,
+ *
+ * _note_ the 4 lowest bits are unused, because the first 4
+ * ports of the controller are not used, too.
+ */
+ u32 input_pullup_active;
+};
+
+extern int __max730x_remove(struct device *dev);
+extern int __max730x_probe(struct max7301 *ts);
+#endif
diff --git a/kernel/include/linux/spi/mc33880.h b/kernel/include/linux/spi/mc33880.h
new file mode 100644
index 000000000..82ffccd6f
--- /dev/null
+++ b/kernel/include/linux/spi/mc33880.h
@@ -0,0 +1,10 @@
+#ifndef LINUX_SPI_MC33880_H
+#define LINUX_SPI_MC33880_H
+
+struct mc33880_platform_data {
+ /* number assigned to the first GPIO */
+ unsigned base;
+};
+
+#endif
+
diff --git a/kernel/include/linux/spi/mcp23s08.h b/kernel/include/linux/spi/mcp23s08.h
new file mode 100644
index 000000000..aa07d7b32
--- /dev/null
+++ b/kernel/include/linux/spi/mcp23s08.h
@@ -0,0 +1,43 @@
+
+/* FIXME driver should be able to handle IRQs... */
+
+struct mcp23s08_chip_info {
+ bool is_present; /* true if populated */
+ unsigned pullups; /* BIT(x) means enable pullup x */
+};
+
+struct mcp23s08_platform_data {
+ /* For mcp23s08, up to 4 slaves (numbered 0..3) can share one SPI
+ * chipselect, each providing 1 gpio_chip instance with 8 gpios.
+ * For mpc23s17, up to 8 slaves (numbered 0..7) can share one SPI
+ * chipselect, each providing 1 gpio_chip (port A + port B) with
+ * 16 gpios.
+ */
+ struct mcp23s08_chip_info chip[8];
+
+ /* "base" is the number of the first GPIO. Dynamic assignment is
+ * not currently supported, and even if there are gaps in chip
+ * addressing the GPIO numbers are sequential .. so for example
+ * if only slaves 0 and 3 are present, their GPIOs range from
+ * base to base+15 (or base+31 for s17 variant).
+ */
+ unsigned base;
+ /* Marks the device as a interrupt controller.
+ * NOTE: The interrupt functionality is only supported for i2c
+ * versions of the chips. The spi chips can also do the interrupts,
+ * but this is not supported by the linux driver yet.
+ */
+ bool irq_controller;
+
+ /* Sets the mirror flag in the IOCON register. Devices
+ * with two interrupt outputs (these are the devices ending with 17 and
+ * those that have 16 IOs) have two IO banks: IO 0-7 form bank 1 and
+ * IO 8-15 are bank 2. These chips have two different interrupt outputs:
+ * One for bank 1 and another for bank 2. If irq-mirror is set, both
+ * interrupts are generated regardless of the bank that an input change
+ * occurred on. If it is not set, the interrupt are only generated for
+ * the bank they belong to.
+ * On devices with only one interrupt output this property is useless.
+ */
+ bool mirror;
+};
diff --git a/kernel/include/linux/spi/mmc_spi.h b/kernel/include/linux/spi/mmc_spi.h
new file mode 100644
index 000000000..274bc0fa0
--- /dev/null
+++ b/kernel/include/linux/spi/mmc_spi.h
@@ -0,0 +1,64 @@
+#ifndef __LINUX_SPI_MMC_SPI_H
+#define __LINUX_SPI_MMC_SPI_H
+
+#include <linux/spi/spi.h>
+#include <linux/interrupt.h>
+
+struct device;
+struct mmc_host;
+
+#define MMC_SPI_USE_CD_GPIO (1 << 0)
+#define MMC_SPI_USE_RO_GPIO (1 << 1)
+#define MMC_SPI_CD_GPIO_ACTIVE_LOW (1 << 2)
+#define MMC_SPI_RO_GPIO_ACTIVE_LOW (1 << 3)
+
+/* Put this in platform_data of a device being used to manage an MMC/SD
+ * card slot. (Modeled after PXA mmc glue; see that for usage examples.)
+ *
+ * REVISIT This is not a spi-specific notion. Any card slot should be
+ * able to handle it. If the MMC core doesn't adopt this kind of notion,
+ * switch the "struct device *" parameters over to "struct spi_device *".
+ */
+struct mmc_spi_platform_data {
+ /* driver activation and (optional) card detect irq hookup */
+ int (*init)(struct device *,
+ irqreturn_t (*)(int, void *),
+ void *);
+ void (*exit)(struct device *, void *);
+
+ /*
+ * Card Detect and Read Only GPIOs. To enable debouncing on the card
+ * detect GPIO, set the cd_debounce to the debounce time in
+ * microseconds.
+ */
+ unsigned int flags;
+ unsigned int cd_gpio;
+ unsigned int cd_debounce;
+ unsigned int ro_gpio;
+
+ /* Capabilities to pass into mmc core (e.g. MMC_CAP_NEEDS_POLL). */
+ unsigned long caps;
+ unsigned long caps2;
+
+ /* how long to debounce card detect, in msecs */
+ u16 detect_delay;
+
+ /* power management */
+ u16 powerup_msecs; /* delay of up to 250 msec */
+ u32 ocr_mask; /* available voltages */
+ void (*setpower)(struct device *, unsigned int maskval);
+};
+
+#ifdef CONFIG_OF
+extern struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi);
+extern void mmc_spi_put_pdata(struct spi_device *spi);
+#else
+static inline struct mmc_spi_platform_data *
+mmc_spi_get_pdata(struct spi_device *spi)
+{
+ return spi->dev.platform_data;
+}
+static inline void mmc_spi_put_pdata(struct spi_device *spi) {}
+#endif /* CONFIG_OF */
+
+#endif /* __LINUX_SPI_MMC_SPI_H */
diff --git a/kernel/include/linux/spi/mxs-spi.h b/kernel/include/linux/spi/mxs-spi.h
new file mode 100644
index 000000000..381d368b9
--- /dev/null
+++ b/kernel/include/linux/spi/mxs-spi.h
@@ -0,0 +1,144 @@
+/*
+ * include/linux/spi/mxs-spi.h
+ *
+ * Freescale i.MX233/i.MX28 SPI controller register definition
+ *
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_SPI_MXS_SPI_H__
+#define __LINUX_SPI_MXS_SPI_H__
+
+#include <linux/dmaengine.h>
+
+#define ssp_is_old(host) ((host)->devid == IMX23_SSP)
+
+/* SSP registers */
+#define HW_SSP_CTRL0 0x000
+#define BM_SSP_CTRL0_RUN (1 << 29)
+#define BM_SSP_CTRL0_SDIO_IRQ_CHECK (1 << 28)
+#define BM_SSP_CTRL0_LOCK_CS (1 << 27)
+#define BM_SSP_CTRL0_IGNORE_CRC (1 << 26)
+#define BM_SSP_CTRL0_READ (1 << 25)
+#define BM_SSP_CTRL0_DATA_XFER (1 << 24)
+#define BP_SSP_CTRL0_BUS_WIDTH 22
+#define BM_SSP_CTRL0_BUS_WIDTH (0x3 << 22)
+#define BM_SSP_CTRL0_WAIT_FOR_IRQ (1 << 21)
+#define BM_SSP_CTRL0_WAIT_FOR_CMD (1 << 20)
+#define BM_SSP_CTRL0_LONG_RESP (1 << 19)
+#define BM_SSP_CTRL0_GET_RESP (1 << 17)
+#define BM_SSP_CTRL0_ENABLE (1 << 16)
+#define BP_SSP_CTRL0_XFER_COUNT 0
+#define BM_SSP_CTRL0_XFER_COUNT 0xffff
+#define HW_SSP_CMD0 0x010
+#define BM_SSP_CMD0_DBL_DATA_RATE_EN (1 << 25)
+#define BM_SSP_CMD0_SLOW_CLKING_EN (1 << 22)
+#define BM_SSP_CMD0_CONT_CLKING_EN (1 << 21)
+#define BM_SSP_CMD0_APPEND_8CYC (1 << 20)
+#define BP_SSP_CMD0_BLOCK_SIZE 16
+#define BM_SSP_CMD0_BLOCK_SIZE (0xf << 16)
+#define BP_SSP_CMD0_BLOCK_COUNT 8
+#define BM_SSP_CMD0_BLOCK_COUNT (0xff << 8)
+#define BP_SSP_CMD0_CMD 0
+#define BM_SSP_CMD0_CMD 0xff
+#define HW_SSP_CMD1 0x020
+#define HW_SSP_XFER_SIZE 0x030
+#define HW_SSP_BLOCK_SIZE 0x040
+#define BP_SSP_BLOCK_SIZE_BLOCK_COUNT 4
+#define BM_SSP_BLOCK_SIZE_BLOCK_COUNT (0xffffff << 4)
+#define BP_SSP_BLOCK_SIZE_BLOCK_SIZE 0
+#define BM_SSP_BLOCK_SIZE_BLOCK_SIZE 0xf
+#define HW_SSP_TIMING(h) (ssp_is_old(h) ? 0x050 : 0x070)
+#define BP_SSP_TIMING_TIMEOUT 16
+#define BM_SSP_TIMING_TIMEOUT (0xffff << 16)
+#define BP_SSP_TIMING_CLOCK_DIVIDE 8
+#define BM_SSP_TIMING_CLOCK_DIVIDE (0xff << 8)
+#define BF_SSP_TIMING_CLOCK_DIVIDE(v) \
+ (((v) << 8) & BM_SSP_TIMING_CLOCK_DIVIDE)
+#define BP_SSP_TIMING_CLOCK_RATE 0
+#define BM_SSP_TIMING_CLOCK_RATE 0xff
+#define BF_SSP_TIMING_CLOCK_RATE(v) \
+ (((v) << 0) & BM_SSP_TIMING_CLOCK_RATE)
+#define HW_SSP_CTRL1(h) (ssp_is_old(h) ? 0x060 : 0x080)
+#define BM_SSP_CTRL1_SDIO_IRQ (1 << 31)
+#define BM_SSP_CTRL1_SDIO_IRQ_EN (1 << 30)
+#define BM_SSP_CTRL1_RESP_ERR_IRQ (1 << 29)
+#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN (1 << 28)
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ (1 << 27)
+#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN (1 << 26)
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ (1 << 25)
+#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN (1 << 24)
+#define BM_SSP_CTRL1_DATA_CRC_IRQ (1 << 23)
+#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN (1 << 22)
+#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ (1 << 21)
+#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ_EN (1 << 20)
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ (1 << 17)
+#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN (1 << 16)
+#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ (1 << 15)
+#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN (1 << 14)
+#define BM_SSP_CTRL1_DMA_ENABLE (1 << 13)
+#define BM_SSP_CTRL1_PHASE (1 << 10)
+#define BM_SSP_CTRL1_POLARITY (1 << 9)
+#define BP_SSP_CTRL1_WORD_LENGTH 4
+#define BM_SSP_CTRL1_WORD_LENGTH (0xf << 4)
+#define BF_SSP_CTRL1_WORD_LENGTH(v) \
+ (((v) << 4) & BM_SSP_CTRL1_WORD_LENGTH)
+#define BV_SSP_CTRL1_WORD_LENGTH__FOUR_BITS 0x3
+#define BV_SSP_CTRL1_WORD_LENGTH__EIGHT_BITS 0x7
+#define BV_SSP_CTRL1_WORD_LENGTH__SIXTEEN_BITS 0xF
+#define BP_SSP_CTRL1_SSP_MODE 0
+#define BM_SSP_CTRL1_SSP_MODE 0xf
+#define BF_SSP_CTRL1_SSP_MODE(v) \
+ (((v) << 0) & BM_SSP_CTRL1_SSP_MODE)
+#define BV_SSP_CTRL1_SSP_MODE__SPI 0x0
+#define BV_SSP_CTRL1_SSP_MODE__SSI 0x1
+#define BV_SSP_CTRL1_SSP_MODE__SD_MMC 0x3
+#define BV_SSP_CTRL1_SSP_MODE__MS 0x4
+
+#define HW_SSP_DATA(h) (ssp_is_old(h) ? 0x070 : 0x090)
+
+#define HW_SSP_SDRESP0(h) (ssp_is_old(h) ? 0x080 : 0x0a0)
+#define HW_SSP_SDRESP1(h) (ssp_is_old(h) ? 0x090 : 0x0b0)
+#define HW_SSP_SDRESP2(h) (ssp_is_old(h) ? 0x0a0 : 0x0c0)
+#define HW_SSP_SDRESP3(h) (ssp_is_old(h) ? 0x0b0 : 0x0d0)
+#define HW_SSP_STATUS(h) (ssp_is_old(h) ? 0x0c0 : 0x100)
+#define BM_SSP_STATUS_CARD_DETECT (1 << 28)
+#define BM_SSP_STATUS_SDIO_IRQ (1 << 17)
+#define BM_SSP_STATUS_FIFO_EMPTY (1 << 5)
+
+#define BF_SSP(value, field) (((value) << BP_SSP_##field) & BM_SSP_##field)
+
+#define SSP_PIO_NUM 3
+
+enum mxs_ssp_id {
+ IMX23_SSP,
+ IMX28_SSP,
+};
+
+struct mxs_ssp {
+ struct device *dev;
+ void __iomem *base;
+ struct clk *clk;
+ unsigned int clk_rate;
+ enum mxs_ssp_id devid;
+
+ struct dma_chan *dmach;
+ unsigned int dma_dir;
+ enum dma_transfer_direction slave_dirn;
+ u32 ssp_pio_words[SSP_PIO_NUM];
+};
+
+void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate);
+
+#endif /* __LINUX_SPI_MXS_SPI_H__ */
diff --git a/kernel/include/linux/spi/pxa2xx_spi.h b/kernel/include/linux/spi/pxa2xx_spi.h
new file mode 100644
index 000000000..6d36dacec
--- /dev/null
+++ b/kernel/include/linux/spi/pxa2xx_spi.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __linux_pxa2xx_spi_h
+#define __linux_pxa2xx_spi_h
+
+#include <linux/pxa2xx_ssp.h>
+
+#define PXA2XX_CS_ASSERT (0x01)
+#define PXA2XX_CS_DEASSERT (0x02)
+
+struct dma_chan;
+
+/* device.platform_data for SSP controller devices */
+struct pxa2xx_spi_master {
+ u32 clock_enable;
+ u16 num_chipselect;
+ u8 enable_dma;
+
+ /* DMA engine specific config */
+ bool (*dma_filter)(struct dma_chan *chan, void *param);
+ void *tx_param;
+ void *rx_param;
+
+ /* For non-PXA arches */
+ struct ssp_device ssp;
+};
+
+/* spi_board_info.controller_data for SPI slave devices,
+ * copied to spi_device.platform_data ... mostly for dma tuning
+ */
+struct pxa2xx_spi_chip {
+ u8 tx_threshold;
+ u8 tx_hi_threshold;
+ u8 rx_threshold;
+ u8 dma_burst_size;
+ u32 timeout;
+ u8 enable_loopback;
+ int gpio_cs;
+ void (*cs_control)(u32 command);
+};
+
+#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
+
+#include <linux/clk.h>
+
+extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info);
+
+#endif
+#endif
diff --git a/kernel/include/linux/spi/rspi.h b/kernel/include/linux/spi/rspi.h
new file mode 100644
index 000000000..a693188cc
--- /dev/null
+++ b/kernel/include/linux/spi/rspi.h
@@ -0,0 +1,26 @@
+/*
+ * Renesas SPI driver
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_SPI_RENESAS_SPI_H__
+#define __LINUX_SPI_RENESAS_SPI_H__
+
+struct rspi_plat_data {
+ unsigned int dma_tx_id;
+ unsigned int dma_rx_id;
+
+ u16 num_chipselect;
+};
+
+#endif
diff --git a/kernel/include/linux/spi/s3c24xx.h b/kernel/include/linux/spi/s3c24xx.h
new file mode 100644
index 000000000..ca271c06c
--- /dev/null
+++ b/kernel/include/linux/spi/s3c24xx.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - SPI Controller platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __LINUX_SPI_S3C24XX_H
+#define __LINUX_SPI_S3C24XX_H __FILE__
+
+struct s3c2410_spi_info {
+ int pin_cs; /* simple gpio cs */
+ unsigned int num_cs; /* total chipselects */
+ int bus_num; /* bus number to use. */
+
+ unsigned int use_fiq:1; /* use fiq */
+
+ void (*gpio_setup)(struct s3c2410_spi_info *spi, int enable);
+ void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
+};
+
+extern int s3c24xx_set_fiq(unsigned int irq, bool on);
+
+#endif /* __LINUX_SPI_S3C24XX_H */
diff --git a/kernel/include/linux/spi/sh_hspi.h b/kernel/include/linux/spi/sh_hspi.h
new file mode 100644
index 000000000..aa0d440ab
--- /dev/null
+++ b/kernel/include/linux/spi/sh_hspi.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2011 Kuninori Morimoto
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef SH_HSPI_H
+#define SH_HSPI_H
+
+struct sh_hspi_info {
+};
+
+#endif
diff --git a/kernel/include/linux/spi/sh_msiof.h b/kernel/include/linux/spi/sh_msiof.h
new file mode 100644
index 000000000..b087a85f5
--- /dev/null
+++ b/kernel/include/linux/spi/sh_msiof.h
@@ -0,0 +1,14 @@
+#ifndef __SPI_SH_MSIOF_H__
+#define __SPI_SH_MSIOF_H__
+
+struct sh_msiof_spi_info {
+ int tx_fifo_override;
+ int rx_fifo_override;
+ u16 num_chipselect;
+ unsigned int dma_tx_id;
+ unsigned int dma_rx_id;
+ u32 dtdl;
+ u32 syncdl;
+};
+
+#endif /* __SPI_SH_MSIOF_H__ */
diff --git a/kernel/include/linux/spi/spi.h b/kernel/include/linux/spi/spi.h
new file mode 100644
index 000000000..d67307234
--- /dev/null
+++ b/kernel/include/linux/spi/spi.h
@@ -0,0 +1,1056 @@
+/*
+ * Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_SPI_H
+#define __LINUX_SPI_H
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/slab.h>
+#include <linux/kthread.h>
+#include <linux/completion.h>
+#include <linux/scatterlist.h>
+
+struct dma_chan;
+
+/*
+ * INTERFACES between SPI master-side drivers and SPI infrastructure.
+ * (There's no SPI slave support for Linux yet...)
+ */
+extern struct bus_type spi_bus_type;
+
+/**
+ * struct spi_device - Master side proxy for an SPI slave device
+ * @dev: Driver model representation of the device.
+ * @master: SPI controller used with the device.
+ * @max_speed_hz: Maximum clock rate to be used with this chip
+ * (on this board); may be changed by the device's driver.
+ * The spi_transfer.speed_hz can override this for each transfer.
+ * @chip_select: Chipselect, distinguishing chips handled by @master.
+ * @mode: The spi mode defines how data is clocked out and in.
+ * This may be changed by the device's driver.
+ * The "active low" default for chipselect mode can be overridden
+ * (by specifying SPI_CS_HIGH) as can the "MSB first" default for
+ * each word in a transfer (by specifying SPI_LSB_FIRST).
+ * @bits_per_word: Data transfers involve one or more words; word sizes
+ * like eight or 12 bits are common. In-memory wordsizes are
+ * powers of two bytes (e.g. 20 bit samples use 32 bits).
+ * This may be changed by the device's driver, or left at the
+ * default (0) indicating protocol words are eight bit bytes.
+ * The spi_transfer.bits_per_word can override this for each transfer.
+ * @irq: Negative, or the number passed to request_irq() to receive
+ * interrupts from this device.
+ * @controller_state: Controller's runtime state
+ * @controller_data: Board-specific definitions for controller, such as
+ * FIFO initialization parameters; from board_info.controller_data
+ * @modalias: Name of the driver to use with this device, or an alias
+ * for that name. This appears in the sysfs "modalias" attribute
+ * for driver coldplugging, and in uevents used for hotplugging
+ * @cs_gpio: gpio number of the chipselect line (optional, -ENOENT when
+ * when not using a GPIO line)
+ *
+ * A @spi_device is used to interchange data between an SPI slave
+ * (usually a discrete chip) and CPU memory.
+ *
+ * In @dev, the platform_data is used to hold information about this
+ * device that's meaningful to the device's protocol driver, but not
+ * to its controller. One example might be an identifier for a chip
+ * variant with slightly different functionality; another might be
+ * information about how this particular board wires the chip's pins.
+ */
+struct spi_device {
+ struct device dev;
+ struct spi_master *master;
+ u32 max_speed_hz;
+ u8 chip_select;
+ u8 bits_per_word;
+ u16 mode;
+#define SPI_CPHA 0x01 /* clock phase */
+#define SPI_CPOL 0x02 /* clock polarity */
+#define SPI_MODE_0 (0|0) /* (original MicroWire) */
+#define SPI_MODE_1 (0|SPI_CPHA)
+#define SPI_MODE_2 (SPI_CPOL|0)
+#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA)
+#define SPI_CS_HIGH 0x04 /* chipselect active high? */
+#define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */
+#define SPI_3WIRE 0x10 /* SI/SO signals shared */
+#define SPI_LOOP 0x20 /* loopback mode */
+#define SPI_NO_CS 0x40 /* 1 dev/bus, no chipselect */
+#define SPI_READY 0x80 /* slave pulls low to pause */
+#define SPI_TX_DUAL 0x100 /* transmit with 2 wires */
+#define SPI_TX_QUAD 0x200 /* transmit with 4 wires */
+#define SPI_RX_DUAL 0x400 /* receive with 2 wires */
+#define SPI_RX_QUAD 0x800 /* receive with 4 wires */
+ int irq;
+ void *controller_state;
+ void *controller_data;
+ char modalias[SPI_NAME_SIZE];
+ int cs_gpio; /* chip select gpio */
+
+ /*
+ * likely need more hooks for more protocol options affecting how
+ * the controller talks to each chip, like:
+ * - memory packing (12 bit samples into low bits, others zeroed)
+ * - priority
+ * - drop chipselect after each word
+ * - chipselect delays
+ * - ...
+ */
+};
+
+static inline struct spi_device *to_spi_device(struct device *dev)
+{
+ return dev ? container_of(dev, struct spi_device, dev) : NULL;
+}
+
+/* most drivers won't need to care about device refcounting */
+static inline struct spi_device *spi_dev_get(struct spi_device *spi)
+{
+ return (spi && get_device(&spi->dev)) ? spi : NULL;
+}
+
+static inline void spi_dev_put(struct spi_device *spi)
+{
+ if (spi)
+ put_device(&spi->dev);
+}
+
+/* ctldata is for the bus_master driver's runtime state */
+static inline void *spi_get_ctldata(struct spi_device *spi)
+{
+ return spi->controller_state;
+}
+
+static inline void spi_set_ctldata(struct spi_device *spi, void *state)
+{
+ spi->controller_state = state;
+}
+
+/* device driver data */
+
+static inline void spi_set_drvdata(struct spi_device *spi, void *data)
+{
+ dev_set_drvdata(&spi->dev, data);
+}
+
+static inline void *spi_get_drvdata(struct spi_device *spi)
+{
+ return dev_get_drvdata(&spi->dev);
+}
+
+struct spi_message;
+struct spi_transfer;
+
+/**
+ * struct spi_driver - Host side "protocol" driver
+ * @id_table: List of SPI devices supported by this driver
+ * @probe: Binds this driver to the spi device. Drivers can verify
+ * that the device is actually present, and may need to configure
+ * characteristics (such as bits_per_word) which weren't needed for
+ * the initial configuration done during system setup.
+ * @remove: Unbinds this driver from the spi device
+ * @shutdown: Standard shutdown callback used during system state
+ * transitions such as powerdown/halt and kexec
+ * @driver: SPI device drivers should initialize the name and owner
+ * field of this structure.
+ *
+ * This represents the kind of device driver that uses SPI messages to
+ * interact with the hardware at the other end of a SPI link. It's called
+ * a "protocol" driver because it works through messages rather than talking
+ * directly to SPI hardware (which is what the underlying SPI controller
+ * driver does to pass those messages). These protocols are defined in the
+ * specification for the device(s) supported by the driver.
+ *
+ * As a rule, those device protocols represent the lowest level interface
+ * supported by a driver, and it will support upper level interfaces too.
+ * Examples of such upper levels include frameworks like MTD, networking,
+ * MMC, RTC, filesystem character device nodes, and hardware monitoring.
+ */
+struct spi_driver {
+ const struct spi_device_id *id_table;
+ int (*probe)(struct spi_device *spi);
+ int (*remove)(struct spi_device *spi);
+ void (*shutdown)(struct spi_device *spi);
+ struct device_driver driver;
+};
+
+static inline struct spi_driver *to_spi_driver(struct device_driver *drv)
+{
+ return drv ? container_of(drv, struct spi_driver, driver) : NULL;
+}
+
+extern int spi_register_driver(struct spi_driver *sdrv);
+
+/**
+ * spi_unregister_driver - reverse effect of spi_register_driver
+ * @sdrv: the driver to unregister
+ * Context: can sleep
+ */
+static inline void spi_unregister_driver(struct spi_driver *sdrv)
+{
+ if (sdrv)
+ driver_unregister(&sdrv->driver);
+}
+
+/**
+ * module_spi_driver() - Helper macro for registering a SPI driver
+ * @__spi_driver: spi_driver struct
+ *
+ * Helper macro for SPI drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_spi_driver(__spi_driver) \
+ module_driver(__spi_driver, spi_register_driver, \
+ spi_unregister_driver)
+
+/**
+ * struct spi_master - interface to SPI master controller
+ * @dev: device interface to this driver
+ * @list: link with the global spi_master list
+ * @bus_num: board-specific (and often SOC-specific) identifier for a
+ * given SPI controller.
+ * @num_chipselect: chipselects are used to distinguish individual
+ * SPI slaves, and are numbered from zero to num_chipselects.
+ * each slave has a chipselect signal, but it's common that not
+ * every chipselect is connected to a slave.
+ * @dma_alignment: SPI controller constraint on DMA buffers alignment.
+ * @mode_bits: flags understood by this controller driver
+ * @bits_per_word_mask: A mask indicating which values of bits_per_word are
+ * supported by the driver. Bit n indicates that a bits_per_word n+1 is
+ * supported. If set, the SPI core will reject any transfer with an
+ * unsupported bits_per_word. If not set, this value is simply ignored,
+ * and it's up to the individual driver to perform any validation.
+ * @min_speed_hz: Lowest supported transfer speed
+ * @max_speed_hz: Highest supported transfer speed
+ * @flags: other constraints relevant to this driver
+ * @bus_lock_spinlock: spinlock for SPI bus locking
+ * @bus_lock_mutex: mutex for SPI bus locking
+ * @bus_lock_flag: indicates that the SPI bus is locked for exclusive use
+ * @setup: updates the device mode and clocking records used by a
+ * device's SPI controller; protocol code may call this. This
+ * must fail if an unrecognized or unsupported mode is requested.
+ * It's always safe to call this unless transfers are pending on
+ * the device whose settings are being modified.
+ * @transfer: adds a message to the controller's transfer queue.
+ * @cleanup: frees controller-specific state
+ * @can_dma: determine whether this master supports DMA
+ * @queued: whether this master is providing an internal message queue
+ * @kworker: thread struct for message pump
+ * @kworker_task: pointer to task for message pump kworker thread
+ * @pump_messages: work struct for scheduling work to the message pump
+ * @queue_lock: spinlock to syncronise access to message queue
+ * @queue: message queue
+ * @idling: the device is entering idle state
+ * @cur_msg: the currently in-flight message
+ * @cur_msg_prepared: spi_prepare_message was called for the currently
+ * in-flight message
+ * @cur_msg_mapped: message has been mapped for DMA
+ * @xfer_completion: used by core transfer_one_message()
+ * @busy: message pump is busy
+ * @running: message pump is running
+ * @rt: whether this queue is set to run as a realtime task
+ * @auto_runtime_pm: the core should ensure a runtime PM reference is held
+ * while the hardware is prepared, using the parent
+ * device for the spidev
+ * @max_dma_len: Maximum length of a DMA transfer for the device.
+ * @prepare_transfer_hardware: a message will soon arrive from the queue
+ * so the subsystem requests the driver to prepare the transfer hardware
+ * by issuing this call
+ * @transfer_one_message: the subsystem calls the driver to transfer a single
+ * message while queuing transfers that arrive in the meantime. When the
+ * driver is finished with this message, it must call
+ * spi_finalize_current_message() so the subsystem can issue the next
+ * message
+ * @unprepare_transfer_hardware: there are currently no more messages on the
+ * queue so the subsystem notifies the driver that it may relax the
+ * hardware by issuing this call
+ * @set_cs: set the logic level of the chip select line. May be called
+ * from interrupt context.
+ * @prepare_message: set up the controller to transfer a single message,
+ * for example doing DMA mapping. Called from threaded
+ * context.
+ * @transfer_one: transfer a single spi_transfer.
+ * - return 0 if the transfer is finished,
+ * - return 1 if the transfer is still in progress. When
+ * the driver is finished with this transfer it must
+ * call spi_finalize_current_transfer() so the subsystem
+ * can issue the next transfer. Note: transfer_one and
+ * transfer_one_message are mutually exclusive; when both
+ * are set, the generic subsystem does not call your
+ * transfer_one callback.
+ * @handle_err: the subsystem calls the driver to handle an error that occurs
+ * in the generic implementation of transfer_one_message().
+ * @unprepare_message: undo any work done by prepare_message().
+ * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
+ * number. Any individual value may be -ENOENT for CS lines that
+ * are not GPIOs (driven by the SPI controller itself).
+ * @dma_tx: DMA transmit channel
+ * @dma_rx: DMA receive channel
+ * @dummy_rx: dummy receive buffer for full-duplex devices
+ * @dummy_tx: dummy transmit buffer for full-duplex devices
+ *
+ * Each SPI master controller can communicate with one or more @spi_device
+ * children. These make a small bus, sharing MOSI, MISO and SCK signals
+ * but not chip select signals. Each device may be configured to use a
+ * different clock rate, since those shared signals are ignored unless
+ * the chip is selected.
+ *
+ * The driver for an SPI controller manages access to those devices through
+ * a queue of spi_message transactions, copying data between CPU memory and
+ * an SPI slave device. For each such message it queues, it calls the
+ * message's completion function when the transaction completes.
+ */
+struct spi_master {
+ struct device dev;
+
+ struct list_head list;
+
+ /* other than negative (== assign one dynamically), bus_num is fully
+ * board-specific. usually that simplifies to being SOC-specific.
+ * example: one SOC has three SPI controllers, numbered 0..2,
+ * and one board's schematics might show it using SPI-2. software
+ * would normally use bus_num=2 for that controller.
+ */
+ s16 bus_num;
+
+ /* chipselects will be integral to many controllers; some others
+ * might use board-specific GPIOs.
+ */
+ u16 num_chipselect;
+
+ /* some SPI controllers pose alignment requirements on DMAable
+ * buffers; let protocol drivers know about these requirements.
+ */
+ u16 dma_alignment;
+
+ /* spi_device.mode flags understood by this controller driver */
+ u16 mode_bits;
+
+ /* bitmask of supported bits_per_word for transfers */
+ u32 bits_per_word_mask;
+#define SPI_BPW_MASK(bits) BIT((bits) - 1)
+#define SPI_BIT_MASK(bits) (((bits) == 32) ? ~0U : (BIT(bits) - 1))
+#define SPI_BPW_RANGE_MASK(min, max) (SPI_BIT_MASK(max) - SPI_BIT_MASK(min - 1))
+
+ /* limits on transfer speed */
+ u32 min_speed_hz;
+ u32 max_speed_hz;
+
+ /* other constraints relevant to this driver */
+ u16 flags;
+#define SPI_MASTER_HALF_DUPLEX BIT(0) /* can't do full duplex */
+#define SPI_MASTER_NO_RX BIT(1) /* can't do buffer read */
+#define SPI_MASTER_NO_TX BIT(2) /* can't do buffer write */
+#define SPI_MASTER_MUST_RX BIT(3) /* requires rx */
+#define SPI_MASTER_MUST_TX BIT(4) /* requires tx */
+
+ /* lock and mutex for SPI bus locking */
+ spinlock_t bus_lock_spinlock;
+ struct mutex bus_lock_mutex;
+
+ /* flag indicating that the SPI bus is locked for exclusive use */
+ bool bus_lock_flag;
+
+ /* Setup mode and clock, etc (spi driver may call many times).
+ *
+ * IMPORTANT: this may be called when transfers to another
+ * device are active. DO NOT UPDATE SHARED REGISTERS in ways
+ * which could break those transfers.
+ */
+ int (*setup)(struct spi_device *spi);
+
+ /* bidirectional bulk transfers
+ *
+ * + The transfer() method may not sleep; its main role is
+ * just to add the message to the queue.
+ * + For now there's no remove-from-queue operation, or
+ * any other request management
+ * + To a given spi_device, message queueing is pure fifo
+ *
+ * + The master's main job is to process its message queue,
+ * selecting a chip then transferring data
+ * + If there are multiple spi_device children, the i/o queue
+ * arbitration algorithm is unspecified (round robin, fifo,
+ * priority, reservations, preemption, etc)
+ *
+ * + Chipselect stays active during the entire message
+ * (unless modified by spi_transfer.cs_change != 0).
+ * + The message transfers use clock and SPI mode parameters
+ * previously established by setup() for this device
+ */
+ int (*transfer)(struct spi_device *spi,
+ struct spi_message *mesg);
+
+ /* called on release() to free memory provided by spi_master */
+ void (*cleanup)(struct spi_device *spi);
+
+ /*
+ * Used to enable core support for DMA handling, if can_dma()
+ * exists and returns true then the transfer will be mapped
+ * prior to transfer_one() being called. The driver should
+ * not modify or store xfer and dma_tx and dma_rx must be set
+ * while the device is prepared.
+ */
+ bool (*can_dma)(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *xfer);
+
+ /*
+ * These hooks are for drivers that want to use the generic
+ * master transfer queueing mechanism. If these are used, the
+ * transfer() function above must NOT be specified by the driver.
+ * Over time we expect SPI drivers to be phased over to this API.
+ */
+ bool queued;
+ struct kthread_worker kworker;
+ struct task_struct *kworker_task;
+ struct kthread_work pump_messages;
+ spinlock_t queue_lock;
+ struct list_head queue;
+ struct spi_message *cur_msg;
+ bool idling;
+ bool busy;
+ bool running;
+ bool rt;
+ bool auto_runtime_pm;
+ bool cur_msg_prepared;
+ bool cur_msg_mapped;
+ struct completion xfer_completion;
+ size_t max_dma_len;
+
+ int (*prepare_transfer_hardware)(struct spi_master *master);
+ int (*transfer_one_message)(struct spi_master *master,
+ struct spi_message *mesg);
+ int (*unprepare_transfer_hardware)(struct spi_master *master);
+ int (*prepare_message)(struct spi_master *master,
+ struct spi_message *message);
+ int (*unprepare_message)(struct spi_master *master,
+ struct spi_message *message);
+
+ /*
+ * These hooks are for drivers that use a generic implementation
+ * of transfer_one_message() provied by the core.
+ */
+ void (*set_cs)(struct spi_device *spi, bool enable);
+ int (*transfer_one)(struct spi_master *master, struct spi_device *spi,
+ struct spi_transfer *transfer);
+ void (*handle_err)(struct spi_master *master,
+ struct spi_message *message);
+
+ /* gpio chip select */
+ int *cs_gpios;
+
+ /* DMA channels for use with core dmaengine helpers */
+ struct dma_chan *dma_tx;
+ struct dma_chan *dma_rx;
+
+ /* dummy data for full duplex devices */
+ void *dummy_rx;
+ void *dummy_tx;
+};
+
+static inline void *spi_master_get_devdata(struct spi_master *master)
+{
+ return dev_get_drvdata(&master->dev);
+}
+
+static inline void spi_master_set_devdata(struct spi_master *master, void *data)
+{
+ dev_set_drvdata(&master->dev, data);
+}
+
+static inline struct spi_master *spi_master_get(struct spi_master *master)
+{
+ if (!master || !get_device(&master->dev))
+ return NULL;
+ return master;
+}
+
+static inline void spi_master_put(struct spi_master *master)
+{
+ if (master)
+ put_device(&master->dev);
+}
+
+/* PM calls that need to be issued by the driver */
+extern int spi_master_suspend(struct spi_master *master);
+extern int spi_master_resume(struct spi_master *master);
+
+/* Calls the driver make to interact with the message queue */
+extern struct spi_message *spi_get_next_queued_message(struct spi_master *master);
+extern void spi_finalize_current_message(struct spi_master *master);
+extern void spi_finalize_current_transfer(struct spi_master *master);
+
+/* the spi driver core manages memory for the spi_master classdev */
+extern struct spi_master *
+spi_alloc_master(struct device *host, unsigned size);
+
+extern int spi_register_master(struct spi_master *master);
+extern int devm_spi_register_master(struct device *dev,
+ struct spi_master *master);
+extern void spi_unregister_master(struct spi_master *master);
+
+extern struct spi_master *spi_busnum_to_master(u16 busnum);
+
+/*---------------------------------------------------------------------------*/
+
+/*
+ * I/O INTERFACE between SPI controller and protocol drivers
+ *
+ * Protocol drivers use a queue of spi_messages, each transferring data
+ * between the controller and memory buffers.
+ *
+ * The spi_messages themselves consist of a series of read+write transfer
+ * segments. Those segments always read the same number of bits as they
+ * write; but one or the other is easily ignored by passing a null buffer
+ * pointer. (This is unlike most types of I/O API, because SPI hardware
+ * is full duplex.)
+ *
+ * NOTE: Allocation of spi_transfer and spi_message memory is entirely
+ * up to the protocol driver, which guarantees the integrity of both (as
+ * well as the data buffers) for as long as the message is queued.
+ */
+
+/**
+ * struct spi_transfer - a read/write buffer pair
+ * @tx_buf: data to be written (dma-safe memory), or NULL
+ * @rx_buf: data to be read (dma-safe memory), or NULL
+ * @tx_dma: DMA address of tx_buf, if @spi_message.is_dma_mapped
+ * @rx_dma: DMA address of rx_buf, if @spi_message.is_dma_mapped
+ * @tx_nbits: number of bits used for writing. If 0 the default
+ * (SPI_NBITS_SINGLE) is used.
+ * @rx_nbits: number of bits used for reading. If 0 the default
+ * (SPI_NBITS_SINGLE) is used.
+ * @len: size of rx and tx buffers (in bytes)
+ * @speed_hz: Select a speed other than the device default for this
+ * transfer. If 0 the default (from @spi_device) is used.
+ * @bits_per_word: select a bits_per_word other than the device default
+ * for this transfer. If 0 the default (from @spi_device) is used.
+ * @cs_change: affects chipselect after this transfer completes
+ * @delay_usecs: microseconds to delay after this transfer before
+ * (optionally) changing the chipselect status, then starting
+ * the next transfer or completing this @spi_message.
+ * @transfer_list: transfers are sequenced through @spi_message.transfers
+ * @tx_sg: Scatterlist for transmit, currently not for client use
+ * @rx_sg: Scatterlist for receive, currently not for client use
+ *
+ * SPI transfers always write the same number of bytes as they read.
+ * Protocol drivers should always provide @rx_buf and/or @tx_buf.
+ * In some cases, they may also want to provide DMA addresses for
+ * the data being transferred; that may reduce overhead, when the
+ * underlying driver uses dma.
+ *
+ * If the transmit buffer is null, zeroes will be shifted out
+ * while filling @rx_buf. If the receive buffer is null, the data
+ * shifted in will be discarded. Only "len" bytes shift out (or in).
+ * It's an error to try to shift out a partial word. (For example, by
+ * shifting out three bytes with word size of sixteen or twenty bits;
+ * the former uses two bytes per word, the latter uses four bytes.)
+ *
+ * In-memory data values are always in native CPU byte order, translated
+ * from the wire byte order (big-endian except with SPI_LSB_FIRST). So
+ * for example when bits_per_word is sixteen, buffers are 2N bytes long
+ * (@len = 2N) and hold N sixteen bit words in CPU byte order.
+ *
+ * When the word size of the SPI transfer is not a power-of-two multiple
+ * of eight bits, those in-memory words include extra bits. In-memory
+ * words are always seen by protocol drivers as right-justified, so the
+ * undefined (rx) or unused (tx) bits are always the most significant bits.
+ *
+ * All SPI transfers start with the relevant chipselect active. Normally
+ * it stays selected until after the last transfer in a message. Drivers
+ * can affect the chipselect signal using cs_change.
+ *
+ * (i) If the transfer isn't the last one in the message, this flag is
+ * used to make the chipselect briefly go inactive in the middle of the
+ * message. Toggling chipselect in this way may be needed to terminate
+ * a chip command, letting a single spi_message perform all of group of
+ * chip transactions together.
+ *
+ * (ii) When the transfer is the last one in the message, the chip may
+ * stay selected until the next transfer. On multi-device SPI busses
+ * with nothing blocking messages going to other devices, this is just
+ * a performance hint; starting a message to another device deselects
+ * this one. But in other cases, this can be used to ensure correctness.
+ * Some devices need protocol transactions to be built from a series of
+ * spi_message submissions, where the content of one message is determined
+ * by the results of previous messages and where the whole transaction
+ * ends when the chipselect goes intactive.
+ *
+ * When SPI can transfer in 1x,2x or 4x. It can get this transfer information
+ * from device through @tx_nbits and @rx_nbits. In Bi-direction, these
+ * two should both be set. User can set transfer mode with SPI_NBITS_SINGLE(1x)
+ * SPI_NBITS_DUAL(2x) and SPI_NBITS_QUAD(4x) to support these three transfer.
+ *
+ * The code that submits an spi_message (and its spi_transfers)
+ * to the lower layers is responsible for managing its memory.
+ * Zero-initialize every field you don't set up explicitly, to
+ * insulate against future API updates. After you submit a message
+ * and its transfers, ignore them until its completion callback.
+ */
+struct spi_transfer {
+ /* it's ok if tx_buf == rx_buf (right?)
+ * for MicroWire, one buffer must be null
+ * buffers must work with dma_*map_single() calls, unless
+ * spi_message.is_dma_mapped reports a pre-existing mapping
+ */
+ const void *tx_buf;
+ void *rx_buf;
+ unsigned len;
+
+ dma_addr_t tx_dma;
+ dma_addr_t rx_dma;
+ struct sg_table tx_sg;
+ struct sg_table rx_sg;
+
+ unsigned cs_change:1;
+ unsigned tx_nbits:3;
+ unsigned rx_nbits:3;
+#define SPI_NBITS_SINGLE 0x01 /* 1bit transfer */
+#define SPI_NBITS_DUAL 0x02 /* 2bits transfer */
+#define SPI_NBITS_QUAD 0x04 /* 4bits transfer */
+ u8 bits_per_word;
+ u16 delay_usecs;
+ u32 speed_hz;
+
+ struct list_head transfer_list;
+};
+
+/**
+ * struct spi_message - one multi-segment SPI transaction
+ * @transfers: list of transfer segments in this transaction
+ * @spi: SPI device to which the transaction is queued
+ * @is_dma_mapped: if true, the caller provided both dma and cpu virtual
+ * addresses for each transfer buffer
+ * @complete: called to report transaction completions
+ * @context: the argument to complete() when it's called
+ * @frame_length: the total number of bytes in the message
+ * @actual_length: the total number of bytes that were transferred in all
+ * successful segments
+ * @status: zero for success, else negative errno
+ * @queue: for use by whichever driver currently owns the message
+ * @state: for use by whichever driver currently owns the message
+ *
+ * A @spi_message is used to execute an atomic sequence of data transfers,
+ * each represented by a struct spi_transfer. The sequence is "atomic"
+ * in the sense that no other spi_message may use that SPI bus until that
+ * sequence completes. On some systems, many such sequences can execute as
+ * as single programmed DMA transfer. On all systems, these messages are
+ * queued, and might complete after transactions to other devices. Messages
+ * sent to a given spi_device are always executed in FIFO order.
+ *
+ * The code that submits an spi_message (and its spi_transfers)
+ * to the lower layers is responsible for managing its memory.
+ * Zero-initialize every field you don't set up explicitly, to
+ * insulate against future API updates. After you submit a message
+ * and its transfers, ignore them until its completion callback.
+ */
+struct spi_message {
+ struct list_head transfers;
+
+ struct spi_device *spi;
+
+ unsigned is_dma_mapped:1;
+
+ /* REVISIT: we might want a flag affecting the behavior of the
+ * last transfer ... allowing things like "read 16 bit length L"
+ * immediately followed by "read L bytes". Basically imposing
+ * a specific message scheduling algorithm.
+ *
+ * Some controller drivers (message-at-a-time queue processing)
+ * could provide that as their default scheduling algorithm. But
+ * others (with multi-message pipelines) could need a flag to
+ * tell them about such special cases.
+ */
+
+ /* completion is reported through a callback */
+ void (*complete)(void *context);
+ void *context;
+ unsigned frame_length;
+ unsigned actual_length;
+ int status;
+
+ /* for optional use by whatever driver currently owns the
+ * spi_message ... between calls to spi_async and then later
+ * complete(), that's the spi_master controller driver.
+ */
+ struct list_head queue;
+ void *state;
+};
+
+static inline void spi_message_init(struct spi_message *m)
+{
+ memset(m, 0, sizeof *m);
+ INIT_LIST_HEAD(&m->transfers);
+}
+
+static inline void
+spi_message_add_tail(struct spi_transfer *t, struct spi_message *m)
+{
+ list_add_tail(&t->transfer_list, &m->transfers);
+}
+
+static inline void
+spi_transfer_del(struct spi_transfer *t)
+{
+ list_del(&t->transfer_list);
+}
+
+/**
+ * spi_message_init_with_transfers - Initialize spi_message and append transfers
+ * @m: spi_message to be initialized
+ * @xfers: An array of spi transfers
+ * @num_xfers: Number of items in the xfer array
+ *
+ * This function initializes the given spi_message and adds each spi_transfer in
+ * the given array to the message.
+ */
+static inline void
+spi_message_init_with_transfers(struct spi_message *m,
+struct spi_transfer *xfers, unsigned int num_xfers)
+{
+ unsigned int i;
+
+ spi_message_init(m);
+ for (i = 0; i < num_xfers; ++i)
+ spi_message_add_tail(&xfers[i], m);
+}
+
+/* It's fine to embed message and transaction structures in other data
+ * structures so long as you don't free them while they're in use.
+ */
+
+static inline struct spi_message *spi_message_alloc(unsigned ntrans, gfp_t flags)
+{
+ struct spi_message *m;
+
+ m = kzalloc(sizeof(struct spi_message)
+ + ntrans * sizeof(struct spi_transfer),
+ flags);
+ if (m) {
+ unsigned i;
+ struct spi_transfer *t = (struct spi_transfer *)(m + 1);
+
+ INIT_LIST_HEAD(&m->transfers);
+ for (i = 0; i < ntrans; i++, t++)
+ spi_message_add_tail(t, m);
+ }
+ return m;
+}
+
+static inline void spi_message_free(struct spi_message *m)
+{
+ kfree(m);
+}
+
+extern int spi_setup(struct spi_device *spi);
+extern int spi_async(struct spi_device *spi, struct spi_message *message);
+extern int spi_async_locked(struct spi_device *spi,
+ struct spi_message *message);
+
+/*---------------------------------------------------------------------------*/
+
+/* All these synchronous SPI transfer routines are utilities layered
+ * over the core async transfer primitive. Here, "synchronous" means
+ * they will sleep uninterruptibly until the async transfer completes.
+ */
+
+extern int spi_sync(struct spi_device *spi, struct spi_message *message);
+extern int spi_sync_locked(struct spi_device *spi, struct spi_message *message);
+extern int spi_bus_lock(struct spi_master *master);
+extern int spi_bus_unlock(struct spi_master *master);
+
+/**
+ * spi_write - SPI synchronous write
+ * @spi: device to which data will be written
+ * @buf: data buffer
+ * @len: data buffer size
+ * Context: can sleep
+ *
+ * This writes the buffer and returns zero or a negative error code.
+ * Callable only from contexts that can sleep.
+ */
+static inline int
+spi_write(struct spi_device *spi, const void *buf, size_t len)
+{
+ struct spi_transfer t = {
+ .tx_buf = buf,
+ .len = len,
+ };
+ struct spi_message m;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ return spi_sync(spi, &m);
+}
+
+/**
+ * spi_read - SPI synchronous read
+ * @spi: device from which data will be read
+ * @buf: data buffer
+ * @len: data buffer size
+ * Context: can sleep
+ *
+ * This reads the buffer and returns zero or a negative error code.
+ * Callable only from contexts that can sleep.
+ */
+static inline int
+spi_read(struct spi_device *spi, void *buf, size_t len)
+{
+ struct spi_transfer t = {
+ .rx_buf = buf,
+ .len = len,
+ };
+ struct spi_message m;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ return spi_sync(spi, &m);
+}
+
+/**
+ * spi_sync_transfer - synchronous SPI data transfer
+ * @spi: device with which data will be exchanged
+ * @xfers: An array of spi_transfers
+ * @num_xfers: Number of items in the xfer array
+ * Context: can sleep
+ *
+ * Does a synchronous SPI data transfer of the given spi_transfer array.
+ *
+ * For more specific semantics see spi_sync().
+ *
+ * It returns zero on success, else a negative error code.
+ */
+static inline int
+spi_sync_transfer(struct spi_device *spi, struct spi_transfer *xfers,
+ unsigned int num_xfers)
+{
+ struct spi_message msg;
+
+ spi_message_init_with_transfers(&msg, xfers, num_xfers);
+
+ return spi_sync(spi, &msg);
+}
+
+/* this copies txbuf and rxbuf data; for small transfers only! */
+extern int spi_write_then_read(struct spi_device *spi,
+ const void *txbuf, unsigned n_tx,
+ void *rxbuf, unsigned n_rx);
+
+/**
+ * spi_w8r8 - SPI synchronous 8 bit write followed by 8 bit read
+ * @spi: device with which data will be exchanged
+ * @cmd: command to be written before data is read back
+ * Context: can sleep
+ *
+ * This returns the (unsigned) eight bit number returned by the
+ * device, or else a negative error code. Callable only from
+ * contexts that can sleep.
+ */
+static inline ssize_t spi_w8r8(struct spi_device *spi, u8 cmd)
+{
+ ssize_t status;
+ u8 result;
+
+ status = spi_write_then_read(spi, &cmd, 1, &result, 1);
+
+ /* return negative errno or unsigned value */
+ return (status < 0) ? status : result;
+}
+
+/**
+ * spi_w8r16 - SPI synchronous 8 bit write followed by 16 bit read
+ * @spi: device with which data will be exchanged
+ * @cmd: command to be written before data is read back
+ * Context: can sleep
+ *
+ * This returns the (unsigned) sixteen bit number returned by the
+ * device, or else a negative error code. Callable only from
+ * contexts that can sleep.
+ *
+ * The number is returned in wire-order, which is at least sometimes
+ * big-endian.
+ */
+static inline ssize_t spi_w8r16(struct spi_device *spi, u8 cmd)
+{
+ ssize_t status;
+ u16 result;
+
+ status = spi_write_then_read(spi, &cmd, 1, &result, 2);
+
+ /* return negative errno or unsigned value */
+ return (status < 0) ? status : result;
+}
+
+/**
+ * spi_w8r16be - SPI synchronous 8 bit write followed by 16 bit big-endian read
+ * @spi: device with which data will be exchanged
+ * @cmd: command to be written before data is read back
+ * Context: can sleep
+ *
+ * This returns the (unsigned) sixteen bit number returned by the device in cpu
+ * endianness, or else a negative error code. Callable only from contexts that
+ * can sleep.
+ *
+ * This function is similar to spi_w8r16, with the exception that it will
+ * convert the read 16 bit data word from big-endian to native endianness.
+ *
+ */
+static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd)
+
+{
+ ssize_t status;
+ __be16 result;
+
+ status = spi_write_then_read(spi, &cmd, 1, &result, 2);
+ if (status < 0)
+ return status;
+
+ return be16_to_cpu(result);
+}
+
+/*---------------------------------------------------------------------------*/
+
+/*
+ * INTERFACE between board init code and SPI infrastructure.
+ *
+ * No SPI driver ever sees these SPI device table segments, but
+ * it's how the SPI core (or adapters that get hotplugged) grows
+ * the driver model tree.
+ *
+ * As a rule, SPI devices can't be probed. Instead, board init code
+ * provides a table listing the devices which are present, with enough
+ * information to bind and set up the device's driver. There's basic
+ * support for nonstatic configurations too; enough to handle adding
+ * parport adapters, or microcontrollers acting as USB-to-SPI bridges.
+ */
+
+/**
+ * struct spi_board_info - board-specific template for a SPI device
+ * @modalias: Initializes spi_device.modalias; identifies the driver.
+ * @platform_data: Initializes spi_device.platform_data; the particular
+ * data stored there is driver-specific.
+ * @controller_data: Initializes spi_device.controller_data; some
+ * controllers need hints about hardware setup, e.g. for DMA.
+ * @irq: Initializes spi_device.irq; depends on how the board is wired.
+ * @max_speed_hz: Initializes spi_device.max_speed_hz; based on limits
+ * from the chip datasheet and board-specific signal quality issues.
+ * @bus_num: Identifies which spi_master parents the spi_device; unused
+ * by spi_new_device(), and otherwise depends on board wiring.
+ * @chip_select: Initializes spi_device.chip_select; depends on how
+ * the board is wired.
+ * @mode: Initializes spi_device.mode; based on the chip datasheet, board
+ * wiring (some devices support both 3WIRE and standard modes), and
+ * possibly presence of an inverter in the chipselect path.
+ *
+ * When adding new SPI devices to the device tree, these structures serve
+ * as a partial device template. They hold information which can't always
+ * be determined by drivers. Information that probe() can establish (such
+ * as the default transfer wordsize) is not included here.
+ *
+ * These structures are used in two places. Their primary role is to
+ * be stored in tables of board-specific device descriptors, which are
+ * declared early in board initialization and then used (much later) to
+ * populate a controller's device tree after the that controller's driver
+ * initializes. A secondary (and atypical) role is as a parameter to
+ * spi_new_device() call, which happens after those controller drivers
+ * are active in some dynamic board configuration models.
+ */
+struct spi_board_info {
+ /* the device name and module name are coupled, like platform_bus;
+ * "modalias" is normally the driver name.
+ *
+ * platform_data goes to spi_device.dev.platform_data,
+ * controller_data goes to spi_device.controller_data,
+ * irq is copied too
+ */
+ char modalias[SPI_NAME_SIZE];
+ const void *platform_data;
+ void *controller_data;
+ int irq;
+
+ /* slower signaling on noisy or low voltage boards */
+ u32 max_speed_hz;
+
+
+ /* bus_num is board specific and matches the bus_num of some
+ * spi_master that will probably be registered later.
+ *
+ * chip_select reflects how this chip is wired to that master;
+ * it's less than num_chipselect.
+ */
+ u16 bus_num;
+ u16 chip_select;
+
+ /* mode becomes spi_device.mode, and is essential for chips
+ * where the default of SPI_CS_HIGH = 0 is wrong.
+ */
+ u16 mode;
+
+ /* ... may need additional spi_device chip config data here.
+ * avoid stuff protocol drivers can set; but include stuff
+ * needed to behave without being bound to a driver:
+ * - quirks like clock rate mattering when not selected
+ */
+};
+
+#ifdef CONFIG_SPI
+extern int
+spi_register_board_info(struct spi_board_info const *info, unsigned n);
+#else
+/* board init code may ignore whether SPI is configured or not */
+static inline int
+spi_register_board_info(struct spi_board_info const *info, unsigned n)
+ { return 0; }
+#endif
+
+
+/* If you're hotplugging an adapter with devices (parport, usb, etc)
+ * use spi_new_device() to describe each device. You can also call
+ * spi_unregister_device() to start making that device vanish, but
+ * normally that would be handled by spi_unregister_master().
+ *
+ * You can also use spi_alloc_device() and spi_add_device() to use a two
+ * stage registration sequence for each spi_device. This gives the caller
+ * some more control over the spi_device structure before it is registered,
+ * but requires that caller to initialize fields that would otherwise
+ * be defined using the board info.
+ */
+extern struct spi_device *
+spi_alloc_device(struct spi_master *master);
+
+extern int
+spi_add_device(struct spi_device *spi);
+
+extern struct spi_device *
+spi_new_device(struct spi_master *, struct spi_board_info *);
+
+static inline void
+spi_unregister_device(struct spi_device *spi)
+{
+ if (spi)
+ device_unregister(&spi->dev);
+}
+
+extern const struct spi_device_id *
+spi_get_device_id(const struct spi_device *sdev);
+
+static inline bool
+spi_transfer_is_last(struct spi_master *master, struct spi_transfer *xfer)
+{
+ return list_is_last(&xfer->transfer_list, &master->cur_msg->transfers);
+}
+
+#endif /* __LINUX_SPI_H */
diff --git a/kernel/include/linux/spi/spi_bitbang.h b/kernel/include/linux/spi/spi_bitbang.h
new file mode 100644
index 000000000..85578d4be
--- /dev/null
+++ b/kernel/include/linux/spi/spi_bitbang.h
@@ -0,0 +1,47 @@
+#ifndef __SPI_BITBANG_H
+#define __SPI_BITBANG_H
+
+#include <linux/workqueue.h>
+
+struct spi_bitbang {
+ spinlock_t lock;
+ u8 busy;
+ u8 use_dma;
+ u8 flags; /* extra spi->mode support */
+
+ struct spi_master *master;
+
+ /* setup_transfer() changes clock and/or wordsize to match settings
+ * for this transfer; zeroes restore defaults from spi_device.
+ */
+ int (*setup_transfer)(struct spi_device *spi,
+ struct spi_transfer *t);
+
+ void (*chipselect)(struct spi_device *spi, int is_on);
+#define BITBANG_CS_ACTIVE 1 /* normally nCS, active low */
+#define BITBANG_CS_INACTIVE 0
+
+ /* txrx_bufs() may handle dma mapping for transfers that don't
+ * already have one (transfer.{tx,rx}_dma is zero), or use PIO
+ */
+ int (*txrx_bufs)(struct spi_device *spi, struct spi_transfer *t);
+
+ /* txrx_word[SPI_MODE_*]() just looks like a shift register */
+ u32 (*txrx_word[4])(struct spi_device *spi,
+ unsigned nsecs,
+ u32 word, u8 bits);
+};
+
+/* you can call these default bitbang->master methods from your custom
+ * methods, if you like.
+ */
+extern int spi_bitbang_setup(struct spi_device *spi);
+extern void spi_bitbang_cleanup(struct spi_device *spi);
+extern int spi_bitbang_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t);
+
+/* start or stop queue processing */
+extern int spi_bitbang_start(struct spi_bitbang *spi);
+extern void spi_bitbang_stop(struct spi_bitbang *spi);
+
+#endif /* __SPI_BITBANG_H */
diff --git a/kernel/include/linux/spi/spi_gpio.h b/kernel/include/linux/spi/spi_gpio.h
new file mode 100644
index 000000000..1634ce31c
--- /dev/null
+++ b/kernel/include/linux/spi/spi_gpio.h
@@ -0,0 +1,71 @@
+#ifndef __LINUX_SPI_GPIO_H
+#define __LINUX_SPI_GPIO_H
+
+/*
+ * For each bitbanged SPI bus, set up a platform_device node with:
+ * - name "spi_gpio"
+ * - id the same as the SPI bus number it implements
+ * - dev.platform data pointing to a struct spi_gpio_platform_data
+ *
+ * Or, see the driver code for information about speedups that are
+ * possible on platforms that support inlined access for GPIOs (no
+ * spi_gpio_platform_data is used).
+ *
+ * Use spi_board_info with these busses in the usual way, being sure
+ * that the controller_data being the GPIO used for each device's
+ * chipselect:
+ *
+ * static struct spi_board_info ... [] = {
+ * ...
+ * // this slave uses GPIO 42 for its chipselect
+ * .controller_data = (void *) 42,
+ * ...
+ * // this one uses GPIO 86 for its chipselect
+ * .controller_data = (void *) 86,
+ * ...
+ * };
+ *
+ * If chipselect is not used (there's only one device on the bus), assign
+ * SPI_GPIO_NO_CHIPSELECT to the controller_data:
+ * .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT;
+ *
+ * If the MISO or MOSI pin is not available then it should be set to
+ * SPI_GPIO_NO_MISO or SPI_GPIO_NO_MOSI.
+ *
+ * If the bitbanged bus is later switched to a "native" controller,
+ * that platform_device and controller_data should be removed.
+ */
+
+#define SPI_GPIO_NO_CHIPSELECT ((unsigned long)-1l)
+#define SPI_GPIO_NO_MISO ((unsigned long)-1l)
+#define SPI_GPIO_NO_MOSI ((unsigned long)-1l)
+
+/**
+ * struct spi_gpio_platform_data - parameter for bitbanged SPI master
+ * @sck: number of the GPIO used for clock output
+ * @mosi: number of the GPIO used for Master Output, Slave In (MOSI) data
+ * @miso: number of the GPIO used for Master Input, Slave Output (MISO) data
+ * @num_chipselect: how many slaves to allow
+ *
+ * All GPIO signals used with the SPI bus managed through this driver
+ * (chipselects, MOSI, MISO, SCK) must be configured as GPIOs, instead
+ * of some alternate function.
+ *
+ * It can be convenient to use this driver with pins that have alternate
+ * functions associated with a "native" SPI controller if a driver for that
+ * controller is not available, or is missing important functionality.
+ *
+ * On platforms which can do so, configure MISO with a weak pullup unless
+ * there's an external pullup on that signal. That saves power by avoiding
+ * floating signals. (A weak pulldown would save power too, but many
+ * drivers expect to see all-ones data as the no slave "response".)
+ */
+struct spi_gpio_platform_data {
+ unsigned sck;
+ unsigned long mosi;
+ unsigned long miso;
+
+ u16 num_chipselect;
+};
+
+#endif /* __LINUX_SPI_GPIO_H */
diff --git a/kernel/include/linux/spi/spi_oc_tiny.h b/kernel/include/linux/spi/spi_oc_tiny.h
new file mode 100644
index 000000000..1ac529cf4
--- /dev/null
+++ b/kernel/include/linux/spi/spi_oc_tiny.h
@@ -0,0 +1,20 @@
+#ifndef _LINUX_SPI_SPI_OC_TINY_H
+#define _LINUX_SPI_SPI_OC_TINY_H
+
+/**
+ * struct tiny_spi_platform_data - platform data of the OpenCores tiny SPI
+ * @freq: input clock freq to the core.
+ * @baudwidth: baud rate divider width of the core.
+ * @gpio_cs_count: number of gpio pins used for chipselect.
+ * @gpio_cs: array of gpio pins used for chipselect.
+ *
+ * freq and baudwidth are used only if the divider is programmable.
+ */
+struct tiny_spi_platform_data {
+ unsigned int freq;
+ unsigned int baudwidth;
+ unsigned int gpio_cs_count;
+ int *gpio_cs;
+};
+
+#endif /* _LINUX_SPI_SPI_OC_TINY_H */
diff --git a/kernel/include/linux/spi/tdo24m.h b/kernel/include/linux/spi/tdo24m.h
new file mode 100644
index 000000000..7572d4e1f
--- /dev/null
+++ b/kernel/include/linux/spi/tdo24m.h
@@ -0,0 +1,13 @@
+#ifndef __TDO24M_H__
+#define __TDO24M_H__
+
+enum tdo24m_model {
+ TDO24M,
+ TDO35S,
+};
+
+struct tdo24m_platform_data {
+ enum tdo24m_model model;
+};
+
+#endif /* __TDO24M_H__ */
diff --git a/kernel/include/linux/spi/tle62x0.h b/kernel/include/linux/spi/tle62x0.h
new file mode 100644
index 000000000..414c6fddf
--- /dev/null
+++ b/kernel/include/linux/spi/tle62x0.h
@@ -0,0 +1,20 @@
+/*
+ * tle62x0.h - platform glue to Infineon TLE62x0 driver chips
+ *
+ * Copyright 2007 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+*/
+
+struct tle62x0_pdata {
+ unsigned int init_state;
+ unsigned int gpio_count;
+};
diff --git a/kernel/include/linux/spi/tsc2005.h b/kernel/include/linux/spi/tsc2005.h
new file mode 100644
index 000000000..563b3b179
--- /dev/null
+++ b/kernel/include/linux/spi/tsc2005.h
@@ -0,0 +1,34 @@
+/*
+ * This file is part of TSC2005 touchscreen driver
+ *
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _LINUX_SPI_TSC2005_H
+#define _LINUX_SPI_TSC2005_H
+
+#include <linux/types.h>
+
+struct tsc2005_platform_data {
+ int ts_pressure_max;
+ int ts_pressure_fudge;
+ int ts_x_max;
+ int ts_x_fudge;
+ int ts_y_max;
+ int ts_y_fudge;
+ int ts_x_plate_ohm;
+ unsigned int esd_timeout_ms;
+ void (*set_reset)(bool enable);
+};
+
+#endif
diff --git a/kernel/include/linux/spi/xilinx_spi.h b/kernel/include/linux/spi/xilinx_spi.h
new file mode 100644
index 000000000..333ecdfee
--- /dev/null
+++ b/kernel/include/linux/spi/xilinx_spi.h
@@ -0,0 +1,19 @@
+#ifndef __LINUX_SPI_XILINX_SPI_H
+#define __LINUX_SPI_XILINX_SPI_H
+
+/**
+ * struct xspi_platform_data - Platform data of the Xilinx SPI driver
+ * @num_chipselect: Number of chip select by the IP.
+ * @little_endian: If registers should be accessed little endian or not.
+ * @bits_per_word: Number of bits per word.
+ * @devices: Devices to add when the driver is probed.
+ * @num_devices: Number of devices in the devices array.
+ */
+struct xspi_platform_data {
+ u16 num_chipselect;
+ u8 bits_per_word;
+ struct spi_board_info *devices;
+ u8 num_devices;
+};
+
+#endif /* __LINUX_SPI_XILINX_SPI_H */