diff options
Diffstat (limited to 'kernel/include/linux/spi/mxs-spi.h')
| -rw-r--r-- | kernel/include/linux/spi/mxs-spi.h | 144 |
1 files changed, 144 insertions, 0 deletions
diff --git a/kernel/include/linux/spi/mxs-spi.h b/kernel/include/linux/spi/mxs-spi.h new file mode 100644 index 000000000..381d368b9 --- /dev/null +++ b/kernel/include/linux/spi/mxs-spi.h @@ -0,0 +1,144 @@ +/* + * include/linux/spi/mxs-spi.h + * + * Freescale i.MX233/i.MX28 SPI controller register definition + * + * Copyright 2008 Embedded Alley Solutions, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_SPI_MXS_SPI_H__ +#define __LINUX_SPI_MXS_SPI_H__ + +#include <linux/dmaengine.h> + +#define ssp_is_old(host) ((host)->devid == IMX23_SSP) + +/* SSP registers */ +#define HW_SSP_CTRL0 0x000 +#define BM_SSP_CTRL0_RUN (1 << 29) +#define BM_SSP_CTRL0_SDIO_IRQ_CHECK (1 << 28) +#define BM_SSP_CTRL0_LOCK_CS (1 << 27) +#define BM_SSP_CTRL0_IGNORE_CRC (1 << 26) +#define BM_SSP_CTRL0_READ (1 << 25) +#define BM_SSP_CTRL0_DATA_XFER (1 << 24) +#define BP_SSP_CTRL0_BUS_WIDTH 22 +#define BM_SSP_CTRL0_BUS_WIDTH (0x3 << 22) +#define BM_SSP_CTRL0_WAIT_FOR_IRQ (1 << 21) +#define BM_SSP_CTRL0_WAIT_FOR_CMD (1 << 20) +#define BM_SSP_CTRL0_LONG_RESP (1 << 19) +#define BM_SSP_CTRL0_GET_RESP (1 << 17) +#define BM_SSP_CTRL0_ENABLE (1 << 16) +#define BP_SSP_CTRL0_XFER_COUNT 0 +#define BM_SSP_CTRL0_XFER_COUNT 0xffff +#define HW_SSP_CMD0 0x010 +#define BM_SSP_CMD0_DBL_DATA_RATE_EN (1 << 25) +#define BM_SSP_CMD0_SLOW_CLKING_EN (1 << 22) +#define BM_SSP_CMD0_CONT_CLKING_EN (1 << 21) +#define BM_SSP_CMD0_APPEND_8CYC (1 << 20) +#define BP_SSP_CMD0_BLOCK_SIZE 16 +#define BM_SSP_CMD0_BLOCK_SIZE (0xf << 16) +#define BP_SSP_CMD0_BLOCK_COUNT 8 +#define BM_SSP_CMD0_BLOCK_COUNT (0xff << 8) +#define BP_SSP_CMD0_CMD 0 +#define BM_SSP_CMD0_CMD 0xff +#define HW_SSP_CMD1 0x020 +#define HW_SSP_XFER_SIZE 0x030 +#define HW_SSP_BLOCK_SIZE 0x040 +#define BP_SSP_BLOCK_SIZE_BLOCK_COUNT 4 +#define BM_SSP_BLOCK_SIZE_BLOCK_COUNT (0xffffff << 4) +#define BP_SSP_BLOCK_SIZE_BLOCK_SIZE 0 +#define BM_SSP_BLOCK_SIZE_BLOCK_SIZE 0xf +#define HW_SSP_TIMING(h) (ssp_is_old(h) ? 0x050 : 0x070) +#define BP_SSP_TIMING_TIMEOUT 16 +#define BM_SSP_TIMING_TIMEOUT (0xffff << 16) +#define BP_SSP_TIMING_CLOCK_DIVIDE 8 +#define BM_SSP_TIMING_CLOCK_DIVIDE (0xff << 8) +#define BF_SSP_TIMING_CLOCK_DIVIDE(v) \ + (((v) << 8) & BM_SSP_TIMING_CLOCK_DIVIDE) +#define BP_SSP_TIMING_CLOCK_RATE 0 +#define BM_SSP_TIMING_CLOCK_RATE 0xff +#define BF_SSP_TIMING_CLOCK_RATE(v) \ + (((v) << 0) & BM_SSP_TIMING_CLOCK_RATE) +#define HW_SSP_CTRL1(h) (ssp_is_old(h) ? 0x060 : 0x080) +#define BM_SSP_CTRL1_SDIO_IRQ (1 << 31) +#define BM_SSP_CTRL1_SDIO_IRQ_EN (1 << 30) +#define BM_SSP_CTRL1_RESP_ERR_IRQ (1 << 29) +#define BM_SSP_CTRL1_RESP_ERR_IRQ_EN (1 << 28) +#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ (1 << 27) +#define BM_SSP_CTRL1_RESP_TIMEOUT_IRQ_EN (1 << 26) +#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ (1 << 25) +#define BM_SSP_CTRL1_DATA_TIMEOUT_IRQ_EN (1 << 24) +#define BM_SSP_CTRL1_DATA_CRC_IRQ (1 << 23) +#define BM_SSP_CTRL1_DATA_CRC_IRQ_EN (1 << 22) +#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ (1 << 21) +#define BM_SSP_CTRL1_FIFO_UNDERRUN_IRQ_EN (1 << 20) +#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ (1 << 17) +#define BM_SSP_CTRL1_RECV_TIMEOUT_IRQ_EN (1 << 16) +#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ (1 << 15) +#define BM_SSP_CTRL1_FIFO_OVERRUN_IRQ_EN (1 << 14) +#define BM_SSP_CTRL1_DMA_ENABLE (1 << 13) +#define BM_SSP_CTRL1_PHASE (1 << 10) +#define BM_SSP_CTRL1_POLARITY (1 << 9) +#define BP_SSP_CTRL1_WORD_LENGTH 4 +#define BM_SSP_CTRL1_WORD_LENGTH (0xf << 4) +#define BF_SSP_CTRL1_WORD_LENGTH(v) \ + (((v) << 4) & BM_SSP_CTRL1_WORD_LENGTH) +#define BV_SSP_CTRL1_WORD_LENGTH__FOUR_BITS 0x3 +#define BV_SSP_CTRL1_WORD_LENGTH__EIGHT_BITS 0x7 +#define BV_SSP_CTRL1_WORD_LENGTH__SIXTEEN_BITS 0xF +#define BP_SSP_CTRL1_SSP_MODE 0 +#define BM_SSP_CTRL1_SSP_MODE 0xf +#define BF_SSP_CTRL1_SSP_MODE(v) \ + (((v) << 0) & BM_SSP_CTRL1_SSP_MODE) +#define BV_SSP_CTRL1_SSP_MODE__SPI 0x0 +#define BV_SSP_CTRL1_SSP_MODE__SSI 0x1 +#define BV_SSP_CTRL1_SSP_MODE__SD_MMC 0x3 +#define BV_SSP_CTRL1_SSP_MODE__MS 0x4 + +#define HW_SSP_DATA(h) (ssp_is_old(h) ? 0x070 : 0x090) + +#define HW_SSP_SDRESP0(h) (ssp_is_old(h) ? 0x080 : 0x0a0) +#define HW_SSP_SDRESP1(h) (ssp_is_old(h) ? 0x090 : 0x0b0) +#define HW_SSP_SDRESP2(h) (ssp_is_old(h) ? 0x0a0 : 0x0c0) +#define HW_SSP_SDRESP3(h) (ssp_is_old(h) ? 0x0b0 : 0x0d0) +#define HW_SSP_STATUS(h) (ssp_is_old(h) ? 0x0c0 : 0x100) +#define BM_SSP_STATUS_CARD_DETECT (1 << 28) +#define BM_SSP_STATUS_SDIO_IRQ (1 << 17) +#define BM_SSP_STATUS_FIFO_EMPTY (1 << 5) + +#define BF_SSP(value, field) (((value) << BP_SSP_##field) & BM_SSP_##field) + +#define SSP_PIO_NUM 3 + +enum mxs_ssp_id { + IMX23_SSP, + IMX28_SSP, +}; + +struct mxs_ssp { + struct device *dev; + void __iomem *base; + struct clk *clk; + unsigned int clk_rate; + enum mxs_ssp_id devid; + + struct dma_chan *dmach; + unsigned int dma_dir; + enum dma_transfer_direction slave_dirn; + u32 ssp_pio_words[SSP_PIO_NUM]; +}; + +void mxs_ssp_set_clk_rate(struct mxs_ssp *ssp, unsigned int rate); + +#endif /* __LINUX_SPI_MXS_SPI_H__ */ |