summaryrefslogtreecommitdiffstats
path: root/kernel/include/linux/spi/mcp23s08.h
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/include/linux/spi/mcp23s08.h')
-rw-r--r--kernel/include/linux/spi/mcp23s08.h43
1 files changed, 43 insertions, 0 deletions
diff --git a/kernel/include/linux/spi/mcp23s08.h b/kernel/include/linux/spi/mcp23s08.h
new file mode 100644
index 000000000..aa07d7b32
--- /dev/null
+++ b/kernel/include/linux/spi/mcp23s08.h
@@ -0,0 +1,43 @@
+
+/* FIXME driver should be able to handle IRQs... */
+
+struct mcp23s08_chip_info {
+ bool is_present; /* true if populated */
+ unsigned pullups; /* BIT(x) means enable pullup x */
+};
+
+struct mcp23s08_platform_data {
+ /* For mcp23s08, up to 4 slaves (numbered 0..3) can share one SPI
+ * chipselect, each providing 1 gpio_chip instance with 8 gpios.
+ * For mpc23s17, up to 8 slaves (numbered 0..7) can share one SPI
+ * chipselect, each providing 1 gpio_chip (port A + port B) with
+ * 16 gpios.
+ */
+ struct mcp23s08_chip_info chip[8];
+
+ /* "base" is the number of the first GPIO. Dynamic assignment is
+ * not currently supported, and even if there are gaps in chip
+ * addressing the GPIO numbers are sequential .. so for example
+ * if only slaves 0 and 3 are present, their GPIOs range from
+ * base to base+15 (or base+31 for s17 variant).
+ */
+ unsigned base;
+ /* Marks the device as a interrupt controller.
+ * NOTE: The interrupt functionality is only supported for i2c
+ * versions of the chips. The spi chips can also do the interrupts,
+ * but this is not supported by the linux driver yet.
+ */
+ bool irq_controller;
+
+ /* Sets the mirror flag in the IOCON register. Devices
+ * with two interrupt outputs (these are the devices ending with 17 and
+ * those that have 16 IOs) have two IO banks: IO 0-7 form bank 1 and
+ * IO 8-15 are bank 2. These chips have two different interrupt outputs:
+ * One for bank 1 and another for bank 2. If irq-mirror is set, both
+ * interrupts are generated regardless of the bank that an input change
+ * occurred on. If it is not set, the interrupt are only generated for
+ * the bank they belong to.
+ * On devices with only one interrupt output this property is useless.
+ */
+ bool mirror;
+};