diff options
Diffstat (limited to 'kernel/include/linux/rio.h')
| -rw-r--r-- | kernel/include/linux/rio.h | 485 |
1 files changed, 485 insertions, 0 deletions
diff --git a/kernel/include/linux/rio.h b/kernel/include/linux/rio.h new file mode 100644 index 000000000..6bda06f21 --- /dev/null +++ b/kernel/include/linux/rio.h @@ -0,0 +1,485 @@ +/* + * RapidIO interconnect services + * (RapidIO Interconnect Specification, http://www.rapidio.org) + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter <mporter@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef LINUX_RIO_H +#define LINUX_RIO_H + +#include <linux/types.h> +#include <linux/ioport.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/device.h> +#include <linux/rio_regs.h> +#include <linux/mod_devicetable.h> +#ifdef CONFIG_RAPIDIO_DMA_ENGINE +#include <linux/dmaengine.h> +#endif + +#define RIO_NO_HOPCOUNT -1 +#define RIO_INVALID_DESTID 0xffff + +#define RIO_MAX_MPORTS 8 +#define RIO_MAX_MPORT_RESOURCES 16 +#define RIO_MAX_DEV_RESOURCES 16 +#define RIO_MAX_MPORT_NAME 40 + +#define RIO_GLOBAL_TABLE 0xff /* Indicates access of a switch's + global routing table if it + has multiple (or per port) + tables */ + +#define RIO_INVALID_ROUTE 0xff /* Indicates that a route table + entry is invalid (no route + exists for the device ID) */ + +#define RIO_MAX_ROUTE_ENTRIES(size) (size ? (1 << 16) : (1 << 8)) +#define RIO_ANY_DESTID(size) (size ? 0xffff : 0xff) + +#define RIO_MAX_MBOX 4 +#define RIO_MAX_MSG_SIZE 0x1000 + +/* + * Error values that may be returned by RIO functions. + */ +#define RIO_SUCCESSFUL 0x00 +#define RIO_BAD_SIZE 0x81 + +/* + * For RIO devices, the region numbers are assigned this way: + * + * 0 RapidIO outbound doorbells + * 1-15 RapidIO memory regions + * + * For RIO master ports, the region number are assigned this way: + * + * 0 RapidIO inbound doorbells + * 1 RapidIO inbound mailboxes + * 2 RapidIO outbound mailboxes + */ +#define RIO_DOORBELL_RESOURCE 0 +#define RIO_INB_MBOX_RESOURCE 1 +#define RIO_OUTB_MBOX_RESOURCE 2 + +#define RIO_PW_MSG_SIZE 64 + +/* + * A component tag value (stored in the component tag CSR) is used as device's + * unique identifier assigned during enumeration. Besides being used for + * identifying switches (which do not have device ID register), it also is used + * by error management notification and therefore has to be assigned + * to endpoints as well. + */ +#define RIO_CTAG_RESRVD 0xfffe0000 /* Reserved */ +#define RIO_CTAG_UDEVID 0x0001ffff /* Unique device identifier */ + +extern struct bus_type rio_bus_type; +extern struct class rio_mport_class; + +struct rio_mport; +struct rio_dev; +union rio_pw_msg; + +/** + * struct rio_switch - RIO switch info + * @node: Node in global list of switches + * @route_table: Copy of switch routing table + * @port_ok: Status of each port (one bit per port) - OK=1 or UNINIT=0 + * @ops: pointer to switch-specific operations + * @lock: lock to serialize operations updates + * @nextdev: Array of per-port pointers to the next attached device + */ +struct rio_switch { + struct list_head node; + u8 *route_table; + u32 port_ok; + struct rio_switch_ops *ops; + spinlock_t lock; + struct rio_dev *nextdev[0]; +}; + +/** + * struct rio_switch_ops - Per-switch operations + * @owner: The module owner of this structure + * @add_entry: Callback for switch-specific route add function + * @get_entry: Callback for switch-specific route get function + * @clr_table: Callback for switch-specific clear route table function + * @set_domain: Callback for switch-specific domain setting function + * @get_domain: Callback for switch-specific domain get function + * @em_init: Callback for switch-specific error management init function + * @em_handle: Callback for switch-specific error management handler function + * + * Defines the operations that are necessary to initialize/control + * a particular RIO switch device. + */ +struct rio_switch_ops { + struct module *owner; + int (*add_entry) (struct rio_mport *mport, u16 destid, u8 hopcount, + u16 table, u16 route_destid, u8 route_port); + int (*get_entry) (struct rio_mport *mport, u16 destid, u8 hopcount, + u16 table, u16 route_destid, u8 *route_port); + int (*clr_table) (struct rio_mport *mport, u16 destid, u8 hopcount, + u16 table); + int (*set_domain) (struct rio_mport *mport, u16 destid, u8 hopcount, + u8 sw_domain); + int (*get_domain) (struct rio_mport *mport, u16 destid, u8 hopcount, + u8 *sw_domain); + int (*em_init) (struct rio_dev *dev); + int (*em_handle) (struct rio_dev *dev, u8 swport); +}; + +/** + * struct rio_dev - RIO device info + * @global_list: Node in list of all RIO devices + * @net_list: Node in list of RIO devices in a network + * @net: Network this device is a part of + * @do_enum: Enumeration flag + * @did: Device ID + * @vid: Vendor ID + * @device_rev: Device revision + * @asm_did: Assembly device ID + * @asm_vid: Assembly vendor ID + * @asm_rev: Assembly revision + * @efptr: Extended feature pointer + * @pef: Processing element features + * @swpinfo: Switch port info + * @src_ops: Source operation capabilities + * @dst_ops: Destination operation capabilities + * @comp_tag: RIO component tag + * @phys_efptr: RIO device extended features pointer + * @em_efptr: RIO Error Management features pointer + * @dma_mask: Mask of bits of RIO address this device implements + * @driver: Driver claiming this device + * @dev: Device model device + * @riores: RIO resources this device owns + * @pwcback: port-write callback function for this device + * @destid: Network destination ID (or associated destid for switch) + * @hopcount: Hopcount to this device + * @prev: Previous RIO device connected to the current one + * @rswitch: struct rio_switch (if valid for this device) + */ +struct rio_dev { + struct list_head global_list; /* node in list of all RIO devices */ + struct list_head net_list; /* node in per net list */ + struct rio_net *net; /* RIO net this device resides in */ + bool do_enum; + u16 did; + u16 vid; + u32 device_rev; + u16 asm_did; + u16 asm_vid; + u16 asm_rev; + u16 efptr; + u32 pef; + u32 swpinfo; + u32 src_ops; + u32 dst_ops; + u32 comp_tag; + u32 phys_efptr; + u32 em_efptr; + u64 dma_mask; + struct rio_driver *driver; /* RIO driver claiming this device */ + struct device dev; /* LDM device structure */ + struct resource riores[RIO_MAX_DEV_RESOURCES]; + int (*pwcback) (struct rio_dev *rdev, union rio_pw_msg *msg, int step); + u16 destid; + u8 hopcount; + struct rio_dev *prev; + struct rio_switch rswitch[0]; /* RIO switch info */ +}; + +#define rio_dev_g(n) list_entry(n, struct rio_dev, global_list) +#define rio_dev_f(n) list_entry(n, struct rio_dev, net_list) +#define to_rio_dev(n) container_of(n, struct rio_dev, dev) +#define sw_to_rio_dev(n) container_of(n, struct rio_dev, rswitch[0]) +#define to_rio_mport(n) container_of(n, struct rio_mport, dev) + +/** + * struct rio_msg - RIO message event + * @res: Mailbox resource + * @mcback: Message event callback + */ +struct rio_msg { + struct resource *res; + void (*mcback) (struct rio_mport * mport, void *dev_id, int mbox, int slot); +}; + +/** + * struct rio_dbell - RIO doorbell event + * @node: Node in list of doorbell events + * @res: Doorbell resource + * @dinb: Doorbell event callback + * @dev_id: Device specific pointer to pass on event + */ +struct rio_dbell { + struct list_head node; + struct resource *res; + void (*dinb) (struct rio_mport *mport, void *dev_id, u16 src, u16 dst, u16 info); + void *dev_id; +}; + +enum rio_phy_type { + RIO_PHY_PARALLEL, + RIO_PHY_SERIAL, +}; + +/** + * struct rio_mport - RIO master port info + * @dbells: List of doorbell events + * @node: Node in global list of master ports + * @nnode: Node in network list of master ports + * @iores: I/O mem resource that this master port interface owns + * @riores: RIO resources that this master port interfaces owns + * @inb_msg: RIO inbound message event descriptors + * @outb_msg: RIO outbound message event descriptors + * @host_deviceid: Host device ID associated with this master port + * @ops: configuration space functions + * @id: Port ID, unique among all ports + * @index: Port index, unique among all port interfaces of the same type + * @sys_size: RapidIO common transport system size + * @phy_type: RapidIO phy type + * @phys_efptr: RIO port extended features pointer + * @name: Port name string + * @dev: device structure associated with an mport + * @priv: Master port private data + * @dma: DMA device associated with mport + * @nscan: RapidIO network enumeration/discovery operations + */ +struct rio_mport { + struct list_head dbells; /* list of doorbell events */ + struct list_head node; /* node in global list of ports */ + struct list_head nnode; /* node in net list of ports */ + struct resource iores; + struct resource riores[RIO_MAX_MPORT_RESOURCES]; + struct rio_msg inb_msg[RIO_MAX_MBOX]; + struct rio_msg outb_msg[RIO_MAX_MBOX]; + int host_deviceid; /* Host device ID */ + struct rio_ops *ops; /* low-level architecture-dependent routines */ + unsigned char id; /* port ID, unique among all ports */ + unsigned char index; /* port index, unique among all port + interfaces of the same type */ + unsigned int sys_size; /* RapidIO common transport system size. + * 0 - Small size. 256 devices. + * 1 - Large size, 65536 devices. + */ + enum rio_phy_type phy_type; /* RapidIO phy type */ + u32 phys_efptr; + unsigned char name[RIO_MAX_MPORT_NAME]; + struct device dev; + void *priv; /* Master port private data */ +#ifdef CONFIG_RAPIDIO_DMA_ENGINE + struct dma_device dma; +#endif + struct rio_scan *nscan; +}; + +/* + * Enumeration/discovery control flags + */ +#define RIO_SCAN_ENUM_NO_WAIT 0x00000001 /* Do not wait for enum completed */ + +struct rio_id_table { + u16 start; /* logical minimal id */ + u32 max; /* max number of IDs in table */ + spinlock_t lock; + unsigned long *table; +}; + +/** + * struct rio_net - RIO network info + * @node: Node in global list of RIO networks + * @devices: List of devices in this network + * @switches: List of switches in this netowrk + * @mports: List of master ports accessing this network + * @hport: Default port for accessing this network + * @id: RIO network ID + * @destid_table: destID allocation table + */ +struct rio_net { + struct list_head node; /* node in list of networks */ + struct list_head devices; /* list of devices in this net */ + struct list_head switches; /* list of switches in this net */ + struct list_head mports; /* list of ports accessing net */ + struct rio_mport *hport; /* primary port for accessing net */ + unsigned char id; /* RIO network ID */ + struct rio_id_table destid_table; /* destID allocation table */ +}; + +/* Low-level architecture-dependent routines */ + +/** + * struct rio_ops - Low-level RIO configuration space operations + * @lcread: Callback to perform local (master port) read of config space. + * @lcwrite: Callback to perform local (master port) write of config space. + * @cread: Callback to perform network read of config space. + * @cwrite: Callback to perform network write of config space. + * @dsend: Callback to send a doorbell message. + * @pwenable: Callback to enable/disable port-write message handling. + * @open_outb_mbox: Callback to initialize outbound mailbox. + * @close_outb_mbox: Callback to shut down outbound mailbox. + * @open_inb_mbox: Callback to initialize inbound mailbox. + * @close_inb_mbox: Callback to shut down inbound mailbox. + * @add_outb_message: Callback to add a message to an outbound mailbox queue. + * @add_inb_buffer: Callback to add a buffer to an inbound mailbox queue. + * @get_inb_message: Callback to get a message from an inbound mailbox queue. + * @map_inb: Callback to map RapidIO address region into local memory space. + * @unmap_inb: Callback to unmap RapidIO address region mapped with map_inb(). + */ +struct rio_ops { + int (*lcread) (struct rio_mport *mport, int index, u32 offset, int len, + u32 *data); + int (*lcwrite) (struct rio_mport *mport, int index, u32 offset, int len, + u32 data); + int (*cread) (struct rio_mport *mport, int index, u16 destid, + u8 hopcount, u32 offset, int len, u32 *data); + int (*cwrite) (struct rio_mport *mport, int index, u16 destid, + u8 hopcount, u32 offset, int len, u32 data); + int (*dsend) (struct rio_mport *mport, int index, u16 destid, u16 data); + int (*pwenable) (struct rio_mport *mport, int enable); + int (*open_outb_mbox)(struct rio_mport *mport, void *dev_id, + int mbox, int entries); + void (*close_outb_mbox)(struct rio_mport *mport, int mbox); + int (*open_inb_mbox)(struct rio_mport *mport, void *dev_id, + int mbox, int entries); + void (*close_inb_mbox)(struct rio_mport *mport, int mbox); + int (*add_outb_message)(struct rio_mport *mport, struct rio_dev *rdev, + int mbox, void *buffer, size_t len); + int (*add_inb_buffer)(struct rio_mport *mport, int mbox, void *buf); + void *(*get_inb_message)(struct rio_mport *mport, int mbox); + int (*map_inb)(struct rio_mport *mport, dma_addr_t lstart, + u64 rstart, u32 size, u32 flags); + void (*unmap_inb)(struct rio_mport *mport, dma_addr_t lstart); +}; + +#define RIO_RESOURCE_MEM 0x00000100 +#define RIO_RESOURCE_DOORBELL 0x00000200 +#define RIO_RESOURCE_MAILBOX 0x00000400 + +#define RIO_RESOURCE_CACHEABLE 0x00010000 +#define RIO_RESOURCE_PCI 0x00020000 + +#define RIO_RESOURCE_BUSY 0x80000000 + +/** + * struct rio_driver - RIO driver info + * @node: Node in list of drivers + * @name: RIO driver name + * @id_table: RIO device ids to be associated with this driver + * @probe: RIO device inserted + * @remove: RIO device removed + * @suspend: RIO device suspended + * @resume: RIO device awakened + * @enable_wake: RIO device enable wake event + * @driver: LDM driver struct + * + * Provides info on a RIO device driver for insertion/removal and + * power management purposes. + */ +struct rio_driver { + struct list_head node; + char *name; + const struct rio_device_id *id_table; + int (*probe) (struct rio_dev * dev, const struct rio_device_id * id); + void (*remove) (struct rio_dev * dev); + int (*suspend) (struct rio_dev * dev, u32 state); + int (*resume) (struct rio_dev * dev); + int (*enable_wake) (struct rio_dev * dev, u32 state, int enable); + struct device_driver driver; +}; + +#define to_rio_driver(drv) container_of(drv,struct rio_driver, driver) + +union rio_pw_msg { + struct { + u32 comptag; /* Component Tag CSR */ + u32 errdetect; /* Port N Error Detect CSR */ + u32 is_port; /* Implementation specific + PortID */ + u32 ltlerrdet; /* LTL Error Detect CSR */ + u32 padding[12]; + } em; + u32 raw[RIO_PW_MSG_SIZE/sizeof(u32)]; +}; + +#ifdef CONFIG_RAPIDIO_DMA_ENGINE + +/* + * enum rio_write_type - RIO write transaction types used in DMA transfers + * + * Note: RapidIO specification defines write (NWRITE) and + * write-with-response (NWRITE_R) data transfer operations. + * Existing DMA controllers that service RapidIO may use one of these operations + * for entire data transfer or their combination with only the last data packet + * requires response. + */ +enum rio_write_type { + RDW_DEFAULT, /* default method used by DMA driver */ + RDW_ALL_NWRITE, /* all packets use NWRITE */ + RDW_ALL_NWRITE_R, /* all packets use NWRITE_R */ + RDW_LAST_NWRITE_R, /* last packet uses NWRITE_R, others - NWRITE */ +}; + +struct rio_dma_ext { + u16 destid; + u64 rio_addr; /* low 64-bits of 66-bit RapidIO address */ + u8 rio_addr_u; /* upper 2-bits of 66-bit RapidIO address */ + enum rio_write_type wr_type; /* preferred RIO write operation type */ +}; + +struct rio_dma_data { + /* Local data (as scatterlist) */ + struct scatterlist *sg; /* I/O scatter list */ + unsigned int sg_len; /* size of scatter list */ + /* Remote device address (flat buffer) */ + u64 rio_addr; /* low 64-bits of 66-bit RapidIO address */ + u8 rio_addr_u; /* upper 2-bits of 66-bit RapidIO address */ + enum rio_write_type wr_type; /* preferred RIO write operation type */ +}; + +static inline struct rio_mport *dma_to_mport(struct dma_device *ddev) +{ + return container_of(ddev, struct rio_mport, dma); +} +#endif /* CONFIG_RAPIDIO_DMA_ENGINE */ + +/** + * struct rio_scan - RIO enumeration and discovery operations + * @owner: The module owner of this structure + * @enumerate: Callback to perform RapidIO fabric enumeration. + * @discover: Callback to perform RapidIO fabric discovery. + */ +struct rio_scan { + struct module *owner; + int (*enumerate)(struct rio_mport *mport, u32 flags); + int (*discover)(struct rio_mport *mport, u32 flags); +}; + +/** + * struct rio_scan_node - list node to register RapidIO enumeration and + * discovery methods with RapidIO core. + * @mport_id: ID of an mport (net) serviced by this enumerator + * @node: node in global list of registered enumerators + * @ops: RIO enumeration and discovery operations + */ +struct rio_scan_node { + int mport_id; + struct list_head node; + struct rio_scan *ops; +}; + +/* Architecture and hardware-specific functions */ +extern int rio_register_mport(struct rio_mport *); +extern int rio_open_inb_mbox(struct rio_mport *, void *, int, int); +extern void rio_close_inb_mbox(struct rio_mport *, int); +extern int rio_open_outb_mbox(struct rio_mport *, void *, int, int); +extern void rio_close_outb_mbox(struct rio_mport *, int); + +#endif /* LINUX_RIO_H */ |