diff options
Diffstat (limited to 'kernel/include/linux/regulator')
| -rw-r--r-- | kernel/include/linux/regulator/consumer.h | 16 | ||||
| -rw-r--r-- | kernel/include/linux/regulator/da9211.h | 19 | ||||
| -rw-r--r-- | kernel/include/linux/regulator/driver.h | 14 | ||||
| -rw-r--r-- | kernel/include/linux/regulator/machine.h | 10 | ||||
| -rw-r--r-- | kernel/include/linux/regulator/max8973-regulator.h | 4 | ||||
| -rw-r--r-- | kernel/include/linux/regulator/mt6311.h | 29 |
6 files changed, 83 insertions, 9 deletions
diff --git a/kernel/include/linux/regulator/consumer.h b/kernel/include/linux/regulator/consumer.h index f8a689ed6..9e0e76992 100644 --- a/kernel/include/linux/regulator/consumer.h +++ b/kernel/include/linux/regulator/consumer.h @@ -550,8 +550,24 @@ static inline int regulator_count_voltages(struct regulator *regulator) { return 0; } + +static inline int regulator_list_voltage(struct regulator *regulator, unsigned selector) +{ + return -EINVAL; +} + #endif +static inline int regulator_set_voltage_triplet(struct regulator *regulator, + int min_uV, int target_uV, + int max_uV) +{ + if (regulator_set_voltage(regulator, target_uV, max_uV) == 0) + return 0; + + return regulator_set_voltage(regulator, min_uV, max_uV); +} + static inline int regulator_set_voltage_tol(struct regulator *regulator, int new_uV, int tol_uV) { diff --git a/kernel/include/linux/regulator/da9211.h b/kernel/include/linux/regulator/da9211.h index 5dd65acc2..a43a5ca11 100644 --- a/kernel/include/linux/regulator/da9211.h +++ b/kernel/include/linux/regulator/da9211.h @@ -1,16 +1,16 @@ /* - * da9211.h - Regulator device driver for DA9211/DA9213 - * Copyright (C) 2014 Dialog Semiconductor Ltd. + * da9211.h - Regulator device driver for DA9211/DA9213/DA9215 + * Copyright (C) 2015 Dialog Semiconductor Ltd. * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Library General Public - * License as published by the Free Software Foundation; either - * version 2 of the License, or (at your option) any later version. + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. * - * This library is distributed in the hope that it will be useful, + * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Library General Public License for more details. + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. */ #ifndef __LINUX_REGULATOR_DA9211_H @@ -23,6 +23,7 @@ enum da9211_chip_id { DA9211, DA9213, + DA9215, }; struct da9211_pdata { diff --git a/kernel/include/linux/regulator/driver.h b/kernel/include/linux/regulator/driver.h index fffa688ac..9c2903e58 100644 --- a/kernel/include/linux/regulator/driver.h +++ b/kernel/include/linux/regulator/driver.h @@ -91,6 +91,7 @@ struct regulator_linear_range { * @set_current_limit: Configure a limit for a current-limited regulator. * The driver should select the current closest to max_uA. * @get_current_limit: Get the configured limit for a current-limited regulator. + * @set_input_current_limit: Configure an input limit. * * @set_mode: Set the configured operating mode for the regulator. * @get_mode: Get the configured operating mode for the regulator. @@ -111,6 +112,7 @@ struct regulator_linear_range { * to stabilise after being set to a new value, in microseconds. * The function provides the from and to voltage selector, the * function should return the worst case. + * @set_soft_start: Enable soft start for the regulator. * * @set_suspend_voltage: Set the voltage for the regulator when the system * is suspended. @@ -121,6 +123,9 @@ struct regulator_linear_range { * @set_suspend_mode: Set the operating mode for the regulator when the * system is suspended. * + * @set_pull_down: Configure the regulator to pull down when the regulator + * is disabled. + * * This struct describes regulator operations which can be implemented by * regulator chip drivers. */ @@ -142,6 +147,9 @@ struct regulator_ops { int min_uA, int max_uA); int (*get_current_limit) (struct regulator_dev *); + int (*set_input_current_limit) (struct regulator_dev *, int lim_uA); + int (*set_over_current_protection) (struct regulator_dev *); + /* enable/disable regulator */ int (*enable) (struct regulator_dev *); int (*disable) (struct regulator_dev *); @@ -158,6 +166,8 @@ struct regulator_ops { unsigned int old_selector, unsigned int new_selector); + int (*set_soft_start) (struct regulator_dev *); + /* report regulator status ... most other accessors report * control inputs, this reports results of combining inputs * from Linux (and other sources) with the actual load. @@ -187,6 +197,8 @@ struct regulator_ops { /* set regulator suspend operating mode (defined in consumer.h) */ int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode); + + int (*set_pull_down) (struct regulator_dev *); }; /* @@ -233,6 +245,7 @@ enum regulator_type { * @linear_min_sel: Minimal selector for starting linear mapping * @fixed_uV: Fixed voltage of rails. * @ramp_delay: Time to settle down after voltage change (unit: uV/us) + * @min_dropout_uV: The minimum dropout voltage this regulator can handle * @linear_ranges: A constant table of possible voltage ranges. * @n_linear_ranges: Number of entries in the @linear_ranges table. * @volt_table: Voltage mapping table (if table based mapping) @@ -280,6 +293,7 @@ struct regulator_desc { unsigned int linear_min_sel; int fixed_uV; unsigned int ramp_delay; + int min_dropout_uV; const struct regulator_linear_range *linear_ranges; int n_linear_ranges; diff --git a/kernel/include/linux/regulator/machine.h b/kernel/include/linux/regulator/machine.h index b07562e08..a1067d0b3 100644 --- a/kernel/include/linux/regulator/machine.h +++ b/kernel/include/linux/regulator/machine.h @@ -75,6 +75,8 @@ struct regulator_state { * * @min_uA: Smallest current consumers may set. * @max_uA: Largest current consumers may set. + * @ilim_uA: Maximum input current. + * @system_load: Load that isn't captured by any consumer requests. * * @valid_modes_mask: Mask of modes which may be configured by consumers. * @valid_ops_mask: Operations which may be performed by consumers. @@ -86,6 +88,8 @@ struct regulator_state { * applied. * @apply_uV: Apply the voltage constraint when initialising. * @ramp_disable: Disable ramp delay when initialising or when setting voltage. + * @soft_start: Enable soft start so that voltage ramps slowly. + * @pull_down: Enable pull down when regulator is disabled. * * @input_uV: Input voltage for regulator when supplied by another regulator. * @@ -111,6 +115,9 @@ struct regulation_constraints { /* current output range (inclusive) - for current control */ int min_uA; int max_uA; + int ilim_uA; + + int system_load; /* valid regulator operating modes for this machine */ unsigned int valid_modes_mask; @@ -138,6 +145,9 @@ struct regulation_constraints { unsigned boot_on:1; /* bootloader/firmware enabled regulator */ unsigned apply_uV:1; /* apply uV constraint if min == max */ unsigned ramp_disable:1; /* disable ramp delay */ + unsigned soft_start:1; /* ramp voltage slowly */ + unsigned pull_down:1; /* pull down resistor when regulator off */ + unsigned over_current_protection:1; /* auto disable on over current */ }; /** diff --git a/kernel/include/linux/regulator/max8973-regulator.h b/kernel/include/linux/regulator/max8973-regulator.h index f8acc052e..f6a8a16a0 100644 --- a/kernel/include/linux/regulator/max8973-regulator.h +++ b/kernel/include/linux/regulator/max8973-regulator.h @@ -58,6 +58,9 @@ * control signal from EN input pin. If it is false then * voltage output will be enabled/disabled through EN bit of * device register. + * @enable_gpio: Enable GPIO. If EN pin is controlled through GPIO from host + * then GPIO number can be provided. If no GPIO controlled then + * it should be -1. * @dvs_gpio: GPIO for dvs. It should be -1 if this is tied with fixed logic. * @dvs_def_state: Default state of dvs. 1 if it is high else 0. */ @@ -65,6 +68,7 @@ struct max8973_regulator_platform_data { struct regulator_init_data *reg_init_data; unsigned long control_flags; bool enable_ext_control; + int enable_gpio; int dvs_gpio; unsigned dvs_def_state:1; }; diff --git a/kernel/include/linux/regulator/mt6311.h b/kernel/include/linux/regulator/mt6311.h new file mode 100644 index 000000000..847325939 --- /dev/null +++ b/kernel/include/linux/regulator/mt6311.h @@ -0,0 +1,29 @@ +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: Henry Chen <henryc.chen@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_REGULATOR_MT6311_H +#define __LINUX_REGULATOR_MT6311_H + +#define MT6311_MAX_REGULATORS 2 + +enum { + MT6311_ID_VDVFS = 0, + MT6311_ID_VBIASN, +}; + +#define MT6311_E1_CID_CODE 0x10 +#define MT6311_E2_CID_CODE 0x20 +#define MT6311_E3_CID_CODE 0x30 + +#endif /* __LINUX_REGULATOR_MT6311_H */ |