diff options
Diffstat (limited to 'kernel/include/linux/power/smartreflex.h')
| -rw-r--r-- | kernel/include/linux/power/smartreflex.h | 318 |
1 files changed, 318 insertions, 0 deletions
diff --git a/kernel/include/linux/power/smartreflex.h b/kernel/include/linux/power/smartreflex.h new file mode 100644 index 000000000..d8b187c39 --- /dev/null +++ b/kernel/include/linux/power/smartreflex.h @@ -0,0 +1,318 @@ +/* + * OMAP Smartreflex Defines and Routines + * + * Author: Thara Gopinath <thara@ti.com> + * + * Copyright (C) 2010 Texas Instruments, Inc. + * Thara Gopinath <thara@ti.com> + * + * Copyright (C) 2008 Nokia Corporation + * Kalle Jokiniemi + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Lesly A M <x0080970@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __POWER_SMARTREFLEX_H +#define __POWER_SMARTREFLEX_H + +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/platform_data/voltage-omap.h> + +/* + * Different Smartreflex IPs version. The v1 is the 65nm version used in + * OMAP3430. The v2 is the update for the 45nm version of the IP + * used in OMAP3630 and OMAP4430 + */ +#define SR_TYPE_V1 1 +#define SR_TYPE_V2 2 + +/* SMART REFLEX REG ADDRESS OFFSET */ +#define SRCONFIG 0x00 +#define SRSTATUS 0x04 +#define SENVAL 0x08 +#define SENMIN 0x0C +#define SENMAX 0x10 +#define SENAVG 0x14 +#define AVGWEIGHT 0x18 +#define NVALUERECIPROCAL 0x1c +#define SENERROR_V1 0x20 +#define ERRCONFIG_V1 0x24 +#define IRQ_EOI 0x20 +#define IRQSTATUS_RAW 0x24 +#define IRQSTATUS 0x28 +#define IRQENABLE_SET 0x2C +#define IRQENABLE_CLR 0x30 +#define SENERROR_V2 0x34 +#define ERRCONFIG_V2 0x38 + +/* Bit/Shift Positions */ + +/* SRCONFIG */ +#define SRCONFIG_ACCUMDATA_SHIFT 22 +#define SRCONFIG_SRCLKLENGTH_SHIFT 12 +#define SRCONFIG_SENNENABLE_V1_SHIFT 5 +#define SRCONFIG_SENPENABLE_V1_SHIFT 3 +#define SRCONFIG_SENNENABLE_V2_SHIFT 1 +#define SRCONFIG_SENPENABLE_V2_SHIFT 0 +#define SRCONFIG_CLKCTRL_SHIFT 0 + +#define SRCONFIG_ACCUMDATA_MASK (0x3ff << 22) + +#define SRCONFIG_SRENABLE BIT(11) +#define SRCONFIG_SENENABLE BIT(10) +#define SRCONFIG_ERRGEN_EN BIT(9) +#define SRCONFIG_MINMAXAVG_EN BIT(8) +#define SRCONFIG_DELAYCTRL BIT(2) + +/* AVGWEIGHT */ +#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT 2 +#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT 0 + +/* NVALUERECIPROCAL */ +#define NVALUERECIPROCAL_SENPGAIN_SHIFT 20 +#define NVALUERECIPROCAL_SENNGAIN_SHIFT 16 +#define NVALUERECIPROCAL_RNSENP_SHIFT 8 +#define NVALUERECIPROCAL_RNSENN_SHIFT 0 + +/* ERRCONFIG */ +#define ERRCONFIG_ERRWEIGHT_SHIFT 16 +#define ERRCONFIG_ERRMAXLIMIT_SHIFT 8 +#define ERRCONFIG_ERRMINLIMIT_SHIFT 0 + +#define SR_ERRWEIGHT_MASK (0x07 << 16) +#define SR_ERRMAXLIMIT_MASK (0xff << 8) +#define SR_ERRMINLIMIT_MASK (0xff << 0) + +#define ERRCONFIG_VPBOUNDINTEN_V1 BIT(31) +#define ERRCONFIG_VPBOUNDINTST_V1 BIT(30) +#define ERRCONFIG_MCUACCUMINTEN BIT(29) +#define ERRCONFIG_MCUACCUMINTST BIT(28) +#define ERRCONFIG_MCUVALIDINTEN BIT(27) +#define ERRCONFIG_MCUVALIDINTST BIT(26) +#define ERRCONFIG_MCUBOUNDINTEN BIT(25) +#define ERRCONFIG_MCUBOUNDINTST BIT(24) +#define ERRCONFIG_MCUDISACKINTEN BIT(23) +#define ERRCONFIG_VPBOUNDINTST_V2 BIT(23) +#define ERRCONFIG_MCUDISACKINTST BIT(22) +#define ERRCONFIG_VPBOUNDINTEN_V2 BIT(22) + +#define ERRCONFIG_STATUS_V1_MASK (ERRCONFIG_VPBOUNDINTST_V1 | \ + ERRCONFIG_MCUACCUMINTST | \ + ERRCONFIG_MCUVALIDINTST | \ + ERRCONFIG_MCUBOUNDINTST | \ + ERRCONFIG_MCUDISACKINTST) +/* IRQSTATUS */ +#define IRQSTATUS_MCUACCUMINT BIT(3) +#define IRQSTATUS_MCVALIDINT BIT(2) +#define IRQSTATUS_MCBOUNDSINT BIT(1) +#define IRQSTATUS_MCUDISABLEACKINT BIT(0) + +/* IRQENABLE_SET and IRQENABLE_CLEAR */ +#define IRQENABLE_MCUACCUMINT BIT(3) +#define IRQENABLE_MCUVALIDINT BIT(2) +#define IRQENABLE_MCUBOUNDSINT BIT(1) +#define IRQENABLE_MCUDISABLEACKINT BIT(0) + +/* Common Bit values */ + +#define SRCLKLENGTH_12MHZ_SYSCLK 0x3c +#define SRCLKLENGTH_13MHZ_SYSCLK 0x41 +#define SRCLKLENGTH_19MHZ_SYSCLK 0x60 +#define SRCLKLENGTH_26MHZ_SYSCLK 0x82 +#define SRCLKLENGTH_38MHZ_SYSCLK 0xC0 + +/* + * 3430 specific values. Maybe these should be passed from board file or + * pmic structures. + */ +#define OMAP3430_SR_ACCUMDATA 0x1f4 + +#define OMAP3430_SR1_SENPAVGWEIGHT 0x03 +#define OMAP3430_SR1_SENNAVGWEIGHT 0x03 + +#define OMAP3430_SR2_SENPAVGWEIGHT 0x01 +#define OMAP3430_SR2_SENNAVGWEIGHT 0x01 + +#define OMAP3430_SR_ERRWEIGHT 0x04 +#define OMAP3430_SR_ERRMAXLIMIT 0x02 + +struct omap_sr { + char *name; + struct list_head node; + struct platform_device *pdev; + struct omap_sr_nvalue_table *nvalue_table; + struct voltagedomain *voltdm; + struct dentry *dbg_dir; + unsigned int irq; + int srid; + int ip_type; + int nvalue_count; + bool autocomp_active; + u32 clk_length; + u32 err_weight; + u32 err_minlimit; + u32 err_maxlimit; + u32 accum_data; + u32 senn_avgweight; + u32 senp_avgweight; + u32 senp_mod; + u32 senn_mod; + void __iomem *base; +}; + +/** + * test_cond_timeout - busy-loop, testing a condition + * @cond: condition to test until it evaluates to true + * @timeout: maximum number of microseconds in the timeout + * @index: loop index (integer) + * + * Loop waiting for @cond to become true or until at least @timeout + * microseconds have passed. To use, define some integer @index in the + * calling code. After running, if @index == @timeout, then the loop has + * timed out. + * + * Copied from omap_test_timeout */ +#define sr_test_cond_timeout(cond, timeout, index) \ +({ \ + for (index = 0; index < timeout; index++) { \ + if (cond) \ + break; \ + udelay(1); \ + } \ +}) + +/** + * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass + * pmic specific info to smartreflex driver + * + * @sr_pmic_init: API to initialize smartreflex on the PMIC side. + */ +struct omap_sr_pmic_data { + void (*sr_pmic_init) (void); +}; + +/** + * struct omap_smartreflex_dev_attr - Smartreflex Device attribute. + * + * @sensor_voltdm_name: Name of voltdomain of SR instance + */ +struct omap_smartreflex_dev_attr { + const char *sensor_voltdm_name; +}; + +#ifdef CONFIG_POWER_AVS_OMAP +/* + * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR. + * The smartreflex class driver should pass the class type. + * Should be used to populate the class_type field of the + * omap_smartreflex_class_data structure. + */ +#define SR_CLASS1 0x1 +#define SR_CLASS2 0x2 +#define SR_CLASS3 0x3 + +/** + * struct omap_sr_class_data - Smartreflex class driver info + * + * @enable: API to enable a particular class smaartreflex. + * @disable: API to disable a particular class smartreflex. + * @configure: API to configure a particular class smartreflex. + * @notify: API to notify the class driver about an event in SR. + * Not needed for class3. + * @notify_flags: specify the events to be notified to the class driver + * @class_type: specify which smartreflex class. + * Can be used by the SR driver to take any class + * based decisions. + */ +struct omap_sr_class_data { + int (*enable)(struct omap_sr *sr); + int (*disable)(struct omap_sr *sr, int is_volt_reset); + int (*configure)(struct omap_sr *sr); + int (*notify)(struct omap_sr *sr, u32 status); + u8 notify_flags; + u8 class_type; +}; + +/** + * struct omap_sr_nvalue_table - Smartreflex n-target value info + * + * @efuse_offs: The offset of the efuse where n-target values are stored. + * @nvalue: The n-target value. + * @errminlimit: The value of the ERRMINLIMIT bitfield for this n-target + * @volt_nominal: microvolts DC that the VDD is initially programmed to + */ +struct omap_sr_nvalue_table { + u32 efuse_offs; + u32 nvalue; + u32 errminlimit; + unsigned long volt_nominal; +}; + +/** + * struct omap_sr_data - Smartreflex platform data. + * + * @name: instance name + * @ip_type: Smartreflex IP type. + * @senp_mod: SENPENABLE value of the sr CONFIG register + * @senn_mod: SENNENABLE value for sr CONFIG register + * @err_weight ERRWEIGHT value of the sr ERRCONFIG register + * @err_maxlimit ERRMAXLIMIT value of the sr ERRCONFIG register + * @accum_data ACCUMDATA value of the sr CONFIG register + * @senn_avgweight SENNAVGWEIGHT value of the sr AVGWEIGHT register + * @senp_avgweight SENPAVGWEIGHT value of the sr AVGWEIGHT register + * @nvalue_count: Number of distinct nvalues in the nvalue table + * @enable_on_init: whether this sr module needs to enabled at + * boot up or not. + * @nvalue_table: table containing the efuse offsets and nvalues + * corresponding to them. + * @voltdm: Pointer to the voltage domain associated with the SR + */ +struct omap_sr_data { + const char *name; + int ip_type; + u32 senp_mod; + u32 senn_mod; + u32 err_weight; + u32 err_maxlimit; + u32 accum_data; + u32 senn_avgweight; + u32 senp_avgweight; + int nvalue_count; + bool enable_on_init; + struct omap_sr_nvalue_table *nvalue_table; + struct voltagedomain *voltdm; +}; + +/* Smartreflex module enable/disable interface */ +void omap_sr_enable(struct voltagedomain *voltdm); +void omap_sr_disable(struct voltagedomain *voltdm); +void omap_sr_disable_reset_volt(struct voltagedomain *voltdm); + +/* API to register the pmic specific data with the smartreflex driver. */ +void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data); + +/* Smartreflex driver hooks to be called from Smartreflex class driver */ +int sr_enable(struct omap_sr *sr, unsigned long volt); +void sr_disable(struct omap_sr *sr); +int sr_configure_errgen(struct omap_sr *sr); +int sr_disable_errgen(struct omap_sr *sr); +int sr_configure_minmax(struct omap_sr *sr); + +/* API to register the smartreflex class driver with the smartreflex driver */ +int sr_register_class(struct omap_sr_class_data *class_data); +#else +static inline void omap_sr_enable(struct voltagedomain *voltdm) {} +static inline void omap_sr_disable(struct voltagedomain *voltdm) {} +static inline void omap_sr_disable_reset_volt( + struct voltagedomain *voltdm) {} +static inline void omap_sr_register_pmic( + struct omap_sr_pmic_data *pmic_data) {} +#endif +#endif |