diff options
Diffstat (limited to 'kernel/include/linux/power/max17042_battery.h')
| -rw-r--r-- | kernel/include/linux/power/max17042_battery.h | 220 |
1 files changed, 220 insertions, 0 deletions
diff --git a/kernel/include/linux/power/max17042_battery.h b/kernel/include/linux/power/max17042_battery.h new file mode 100644 index 000000000..cf112b407 --- /dev/null +++ b/kernel/include/linux/power/max17042_battery.h @@ -0,0 +1,220 @@ +/* + * Fuel gauge driver for Maxim 17042 / 8966 / 8997 + * Note that Maxim 8966 and 8997 are mfd and this is its subdevice. + * + * Copyright (C) 2011 Samsung Electronics + * MyungJoo Ham <myungjoo.ham@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __MAX17042_BATTERY_H_ +#define __MAX17042_BATTERY_H_ + +#define MAX17042_STATUS_BattAbsent (1 << 3) +#define MAX17042_BATTERY_FULL (100) +#define MAX17042_DEFAULT_SNS_RESISTOR (10000) + +#define MAX17042_CHARACTERIZATION_DATA_SIZE 48 + +enum max17042_register { + MAX17042_STATUS = 0x00, + MAX17042_VALRT_Th = 0x01, + MAX17042_TALRT_Th = 0x02, + MAX17042_SALRT_Th = 0x03, + MAX17042_AtRate = 0x04, + MAX17042_RepCap = 0x05, + MAX17042_RepSOC = 0x06, + MAX17042_Age = 0x07, + MAX17042_TEMP = 0x08, + MAX17042_VCELL = 0x09, + MAX17042_Current = 0x0A, + MAX17042_AvgCurrent = 0x0B, + + MAX17042_SOC = 0x0D, + MAX17042_AvSOC = 0x0E, + MAX17042_RemCap = 0x0F, + MAX17042_FullCAP = 0x10, + MAX17042_TTE = 0x11, + MAX17042_V_empty = 0x12, + + MAX17042_RSLOW = 0x14, + + MAX17042_AvgTA = 0x16, + MAX17042_Cycles = 0x17, + MAX17042_DesignCap = 0x18, + MAX17042_AvgVCELL = 0x19, + MAX17042_MinMaxTemp = 0x1A, + MAX17042_MinMaxVolt = 0x1B, + MAX17042_MinMaxCurr = 0x1C, + MAX17042_CONFIG = 0x1D, + MAX17042_ICHGTerm = 0x1E, + MAX17042_AvCap = 0x1F, + MAX17042_ManName = 0x20, + MAX17042_DevName = 0x21, + + MAX17042_FullCAPNom = 0x23, + MAX17042_TempNom = 0x24, + MAX17042_TempLim = 0x25, + MAX17042_TempHot = 0x26, + MAX17042_AIN = 0x27, + MAX17042_LearnCFG = 0x28, + MAX17042_FilterCFG = 0x29, + MAX17042_RelaxCFG = 0x2A, + MAX17042_MiscCFG = 0x2B, + MAX17042_TGAIN = 0x2C, + MAx17042_TOFF = 0x2D, + MAX17042_CGAIN = 0x2E, + MAX17042_COFF = 0x2F, + + MAX17042_MaskSOC = 0x32, + MAX17042_SOC_empty = 0x33, + MAX17042_T_empty = 0x34, + + MAX17042_FullCAP0 = 0x35, + MAX17042_LAvg_empty = 0x36, + MAX17042_FCTC = 0x37, + MAX17042_RCOMP0 = 0x38, + MAX17042_TempCo = 0x39, + MAX17042_EmptyTempCo = 0x3A, + MAX17042_K_empty0 = 0x3B, + MAX17042_TaskPeriod = 0x3C, + MAX17042_FSTAT = 0x3D, + + MAX17042_SHDNTIMER = 0x3F, + + MAX17042_dQacc = 0x45, + MAX17042_dPacc = 0x46, + + MAX17042_VFSOC0 = 0x48, + + MAX17042_QH = 0x4D, + MAX17042_QL = 0x4E, + + MAX17042_VFSOC0Enable = 0x60, + MAX17042_MLOCKReg1 = 0x62, + MAX17042_MLOCKReg2 = 0x63, + + MAX17042_MODELChrTbl = 0x80, + + MAX17042_OCV = 0xEE, + + MAX17042_OCVInternal = 0xFB, + + MAX17042_VFSOC = 0xFF, +}; + +/* Registers specific to max17047/50 */ +enum max17047_register { + MAX17047_QRTbl00 = 0x12, + MAX17047_FullSOCThr = 0x13, + MAX17047_QRTbl10 = 0x22, + MAX17047_QRTbl20 = 0x32, + MAX17047_V_empty = 0x3A, + MAX17047_QRTbl30 = 0x42, +}; + +enum max170xx_chip_type { + MAXIM_DEVICE_TYPE_UNKNOWN = 0, + MAXIM_DEVICE_TYPE_MAX17042, + MAXIM_DEVICE_TYPE_MAX17047, + MAXIM_DEVICE_TYPE_MAX17050, + + MAXIM_DEVICE_TYPE_NUM +}; + +/* + * used for setting a register to a desired value + * addr : address for a register + * data : setting value for the register + */ +struct max17042_reg_data { + u8 addr; + u16 data; +}; + +struct max17042_config_data { + /* External current sense resistor value in milli-ohms */ + u32 cur_sense_val; + + /* A/D measurement */ + u16 tgain; /* 0x2C */ + u16 toff; /* 0x2D */ + u16 cgain; /* 0x2E */ + u16 coff; /* 0x2F */ + + /* Alert / Status */ + u16 valrt_thresh; /* 0x01 */ + u16 talrt_thresh; /* 0x02 */ + u16 soc_alrt_thresh; /* 0x03 */ + u16 config; /* 0x01D */ + u16 shdntimer; /* 0x03F */ + + /* App data */ + u16 full_soc_thresh; /* 0x13 */ + u16 design_cap; /* 0x18 */ + u16 ichgt_term; /* 0x1E */ + + /* MG3 config */ + u16 at_rate; /* 0x04 */ + u16 learn_cfg; /* 0x28 */ + u16 filter_cfg; /* 0x29 */ + u16 relax_cfg; /* 0x2A */ + u16 misc_cfg; /* 0x2B */ + u16 masksoc; /* 0x32 */ + + /* MG3 save and restore */ + u16 fullcap; /* 0x10 */ + u16 fullcapnom; /* 0x23 */ + u16 socempty; /* 0x33 */ + u16 lavg_empty; /* 0x36 */ + u16 dqacc; /* 0x45 */ + u16 dpacc; /* 0x46 */ + u16 qrtbl00; /* 0x12 */ + u16 qrtbl10; /* 0x22 */ + u16 qrtbl20; /* 0x32 */ + u16 qrtbl30; /* 0x42 */ + + /* Cell technology from power_supply.h */ + u16 cell_technology; + + /* Cell Data */ + u16 vempty; /* 0x12 */ + u16 temp_nom; /* 0x24 */ + u16 temp_lim; /* 0x25 */ + u16 fctc; /* 0x37 */ + u16 rcomp0; /* 0x38 */ + u16 tcompc0; /* 0x39 */ + u16 empty_tempco; /* 0x3A */ + u16 kempty0; /* 0x3B */ + u16 cell_char_tbl[MAX17042_CHARACTERIZATION_DATA_SIZE]; +} __packed; + +struct max17042_platform_data { + struct max17042_reg_data *init_data; + struct max17042_config_data *config_data; + int num_init_data; /* Number of enties in init_data array */ + bool enable_current_sense; + bool enable_por_init; /* Use POR init from Maxim appnote */ + + /* + * R_sns in micro-ohms. + * default 10000 (if r_sns = 0) as it is the recommended value by + * the datasheet although it can be changed by board designers. + */ + unsigned int r_sns; +}; + +#endif /* __MAX17042_BATTERY_H_ */ |