diff options
Diffstat (limited to 'kernel/include/linux/platform_data')
222 files changed, 10096 insertions, 0 deletions
diff --git a/kernel/include/linux/platform_data/ad5449.h b/kernel/include/linux/platform_data/ad5449.h new file mode 100644 index 000000000..bd712bd4b --- /dev/null +++ b/kernel/include/linux/platform_data/ad5449.h @@ -0,0 +1,40 @@ +/* + * AD5415, AD5426, AD5429, AD5432, AD5439, AD5443, AD5449 Digital to Analog + * Converter driver. + * + * Copyright 2012 Analog Devices Inc. + * Author: Lars-Peter Clausen <lars@metafoo.de> + * + * Licensed under the GPL-2. + */ + +#ifndef __LINUX_PLATFORM_DATA_AD5449_H__ +#define __LINUX_PLATFORM_DATA_AD5449_H__ + +/** + * enum ad5449_sdo_mode - AD5449 SDO pin configuration + * @AD5449_SDO_DRIVE_FULL: Drive the SDO pin with full strength. + * @AD5449_SDO_DRIVE_WEAK: Drive the SDO pin with not full strength. + * @AD5449_SDO_OPEN_DRAIN: Operate the SDO pin in open-drain mode. + * @AD5449_SDO_DISABLED: Disable the SDO pin, in this mode it is not possible to + * read back from the device. + */ +enum ad5449_sdo_mode { + AD5449_SDO_DRIVE_FULL = 0x0, + AD5449_SDO_DRIVE_WEAK = 0x1, + AD5449_SDO_OPEN_DRAIN = 0x2, + AD5449_SDO_DISABLED = 0x3, +}; + +/** + * struct ad5449_platform_data - Platform data for the ad5449 DAC driver + * @sdo_mode: SDO pin mode + * @hardware_clear_to_midscale: Whether asserting the hardware CLR pin sets the + * outputs to midscale (true) or to zero scale(false). + */ +struct ad5449_platform_data { + enum ad5449_sdo_mode sdo_mode; + bool hardware_clear_to_midscale; +}; + +#endif diff --git a/kernel/include/linux/platform_data/ad5755.h b/kernel/include/linux/platform_data/ad5755.h new file mode 100644 index 000000000..a5a1cb751 --- /dev/null +++ b/kernel/include/linux/platform_data/ad5755.h @@ -0,0 +1,103 @@ +/* + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ +#ifndef __LINUX_PLATFORM_DATA_AD5755_H__ +#define __LINUX_PLATFORM_DATA_AD5755_H__ + +enum ad5755_mode { + AD5755_MODE_VOLTAGE_0V_5V = 0, + AD5755_MODE_VOLTAGE_0V_10V = 1, + AD5755_MODE_VOLTAGE_PLUSMINUS_5V = 2, + AD5755_MODE_VOLTAGE_PLUSMINUS_10V = 3, + AD5755_MODE_CURRENT_4mA_20mA = 4, + AD5755_MODE_CURRENT_0mA_20mA = 5, + AD5755_MODE_CURRENT_0mA_24mA = 6, +}; + +enum ad5755_dc_dc_phase { + AD5755_DC_DC_PHASE_ALL_SAME_EDGE = 0, + AD5755_DC_DC_PHASE_A_B_SAME_EDGE_C_D_OPP_EDGE = 1, + AD5755_DC_DC_PHASE_A_C_SAME_EDGE_B_D_OPP_EDGE = 2, + AD5755_DC_DC_PHASE_90_DEGREE = 3, +}; + +enum ad5755_dc_dc_freq { + AD5755_DC_DC_FREQ_250kHZ = 0, + AD5755_DC_DC_FREQ_410kHZ = 1, + AD5755_DC_DC_FREQ_650kHZ = 2, +}; + +enum ad5755_dc_dc_maxv { + AD5755_DC_DC_MAXV_23V = 0, + AD5755_DC_DC_MAXV_24V5 = 1, + AD5755_DC_DC_MAXV_27V = 2, + AD5755_DC_DC_MAXV_29V5 = 3, +}; + +enum ad5755_slew_rate { + AD5755_SLEW_RATE_64k = 0, + AD5755_SLEW_RATE_32k = 1, + AD5755_SLEW_RATE_16k = 2, + AD5755_SLEW_RATE_8k = 3, + AD5755_SLEW_RATE_4k = 4, + AD5755_SLEW_RATE_2k = 5, + AD5755_SLEW_RATE_1k = 6, + AD5755_SLEW_RATE_500 = 7, + AD5755_SLEW_RATE_250 = 8, + AD5755_SLEW_RATE_125 = 9, + AD5755_SLEW_RATE_64 = 10, + AD5755_SLEW_RATE_32 = 11, + AD5755_SLEW_RATE_16 = 12, + AD5755_SLEW_RATE_8 = 13, + AD5755_SLEW_RATE_4 = 14, + AD5755_SLEW_RATE_0_5 = 15, +}; + +enum ad5755_slew_step_size { + AD5755_SLEW_STEP_SIZE_1 = 0, + AD5755_SLEW_STEP_SIZE_2 = 1, + AD5755_SLEW_STEP_SIZE_4 = 2, + AD5755_SLEW_STEP_SIZE_8 = 3, + AD5755_SLEW_STEP_SIZE_16 = 4, + AD5755_SLEW_STEP_SIZE_32 = 5, + AD5755_SLEW_STEP_SIZE_64 = 6, + AD5755_SLEW_STEP_SIZE_128 = 7, + AD5755_SLEW_STEP_SIZE_256 = 8, +}; + +/** + * struct ad5755_platform_data - AD5755 DAC driver platform data + * @ext_dc_dc_compenstation_resistor: Whether an external DC-DC converter + * compensation register is used. + * @dc_dc_phase: DC-DC converter phase. + * @dc_dc_freq: DC-DC converter frequency. + * @dc_dc_maxv: DC-DC maximum allowed boost voltage. + * @dac.mode: The mode to be used for the DAC output. + * @dac.ext_current_sense_resistor: Whether an external current sense resistor + * is used. + * @dac.enable_voltage_overrange: Whether to enable 20% voltage output overrange. + * @dac.slew.enable: Whether to enable digital slew. + * @dac.slew.rate: Slew rate of the digital slew. + * @dac.slew.step_size: Slew step size of the digital slew. + **/ +struct ad5755_platform_data { + bool ext_dc_dc_compenstation_resistor; + enum ad5755_dc_dc_phase dc_dc_phase; + enum ad5755_dc_dc_freq dc_dc_freq; + enum ad5755_dc_dc_maxv dc_dc_maxv; + + struct { + enum ad5755_mode mode; + bool ext_current_sense_resistor; + bool enable_voltage_overrange; + struct { + bool enable; + enum ad5755_slew_rate rate; + enum ad5755_slew_step_size step_size; + } slew; + } dac[4]; +}; + +#endif diff --git a/kernel/include/linux/platform_data/ad7266.h b/kernel/include/linux/platform_data/ad7266.h new file mode 100644 index 000000000..eabfdcb26 --- /dev/null +++ b/kernel/include/linux/platform_data/ad7266.h @@ -0,0 +1,54 @@ +/* + * AD7266/65 SPI ADC driver + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef __IIO_ADC_AD7266_H__ +#define __IIO_ADC_AD7266_H__ + +/** + * enum ad7266_range - AD7266 reference voltage range + * @AD7266_RANGE_VREF: Device is configured for input range 0V - VREF + * (RANGE pin set to low) + * @AD7266_RANGE_2VREF: Device is configured for input range 0V - 2VREF + * (RANGE pin set to high) + */ +enum ad7266_range { + AD7266_RANGE_VREF, + AD7266_RANGE_2VREF, +}; + +/** + * enum ad7266_mode - AD7266 sample mode + * @AD7266_MODE_DIFF: Device is configured for full differential mode + * (SGL/DIFF pin set to low, AD0 pin set to low) + * @AD7266_MODE_PSEUDO_DIFF: Device is configured for pseudo differential mode + * (SGL/DIFF pin set to low, AD0 pin set to high) + * @AD7266_MODE_SINGLE_ENDED: Device is configured for single-ended mode + * (SGL/DIFF pin set to high) + */ +enum ad7266_mode { + AD7266_MODE_DIFF, + AD7266_MODE_PSEUDO_DIFF, + AD7266_MODE_SINGLE_ENDED, +}; + +/** + * struct ad7266_platform_data - Platform data for the AD7266 driver + * @range: Reference voltage range the device is configured for + * @mode: Sample mode the device is configured for + * @fixed_addr: Whether the address pins are hard-wired + * @addr_gpios: GPIOs used for controlling the address pins, only used if + * fixed_addr is set to false. + */ +struct ad7266_platform_data { + enum ad7266_range range; + enum ad7266_mode mode; + bool fixed_addr; + unsigned int addr_gpios[3]; +}; + +#endif diff --git a/kernel/include/linux/platform_data/ad7291.h b/kernel/include/linux/platform_data/ad7291.h new file mode 100644 index 000000000..bbd89fa51 --- /dev/null +++ b/kernel/include/linux/platform_data/ad7291.h @@ -0,0 +1,12 @@ +#ifndef __IIO_AD7291_H__ +#define __IIO_AD7291_H__ + +/** + * struct ad7291_platform_data - AD7291 platform data + * @use_external_ref: Whether to use an external or internal reference voltage + */ +struct ad7291_platform_data { + bool use_external_ref; +}; + +#endif diff --git a/kernel/include/linux/platform_data/ad7298.h b/kernel/include/linux/platform_data/ad7298.h new file mode 100644 index 000000000..fbf8adf13 --- /dev/null +++ b/kernel/include/linux/platform_data/ad7298.h @@ -0,0 +1,20 @@ +/* + * AD7298 SPI ADC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef __LINUX_PLATFORM_DATA_AD7298_H__ +#define __LINUX_PLATFORM_DATA_AD7298_H__ + +/** + * struct ad7298_platform_data - Platform data for the ad7298 ADC driver + * @ext_ref: Whether to use an external reference voltage. + **/ +struct ad7298_platform_data { + bool ext_ref; +}; + +#endif /* IIO_ADC_AD7298_H_ */ diff --git a/kernel/include/linux/platform_data/ad7303.h b/kernel/include/linux/platform_data/ad7303.h new file mode 100644 index 000000000..de6a7a6b4 --- /dev/null +++ b/kernel/include/linux/platform_data/ad7303.h @@ -0,0 +1,21 @@ +/* + * Analog Devices AD7303 DAC driver + * + * Copyright 2013 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef __IIO_ADC_AD7303_H__ +#define __IIO_ADC_AD7303_H__ + +/** + * struct ad7303_platform_data - AD7303 platform data + * @use_external_ref: If set to true use an external voltage reference connected + * to the REF pin, otherwise use the internal reference derived from Vdd. + */ +struct ad7303_platform_data { + bool use_external_ref; +}; + +#endif diff --git a/kernel/include/linux/platform_data/ad7791.h b/kernel/include/linux/platform_data/ad7791.h new file mode 100644 index 000000000..f9e4db1b8 --- /dev/null +++ b/kernel/include/linux/platform_data/ad7791.h @@ -0,0 +1,17 @@ +#ifndef __LINUX_PLATFORM_DATA_AD7791__ +#define __LINUX_PLATFORM_DATA_AD7791__ + +/** + * struct ad7791_platform_data - AD7791 device platform data + * @buffered: If set to true configure the device for buffered input mode. + * @burnout_current: If set to true the 100mA burnout current is enabled. + * @unipolar: If set to true sample in unipolar mode, if set to false sample in + * bipolar mode. + */ +struct ad7791_platform_data { + bool buffered; + bool burnout_current; + bool unipolar; +}; + +#endif diff --git a/kernel/include/linux/platform_data/ad7793.h b/kernel/include/linux/platform_data/ad7793.h new file mode 100644 index 000000000..7ea6751aa --- /dev/null +++ b/kernel/include/linux/platform_data/ad7793.h @@ -0,0 +1,112 @@ +/* + * AD7792/AD7793 SPI ADC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ +#ifndef __LINUX_PLATFORM_DATA_AD7793_H__ +#define __LINUX_PLATFORM_DATA_AD7793_H__ + +/** + * enum ad7793_clock_source - AD7793 clock source selection + * @AD7793_CLK_SRC_INT: Internal 64 kHz clock, not available at the CLK pin. + * @AD7793_CLK_SRC_INT_CO: Internal 64 kHz clock, available at the CLK pin. + * @AD7793_CLK_SRC_EXT: Use external clock. + * @AD7793_CLK_SRC_EXT_DIV2: Use external clock divided by 2. + */ +enum ad7793_clock_source { + AD7793_CLK_SRC_INT, + AD7793_CLK_SRC_INT_CO, + AD7793_CLK_SRC_EXT, + AD7793_CLK_SRC_EXT_DIV2, +}; + +/** + * enum ad7793_bias_voltage - AD7793 bias voltage selection + * @AD7793_BIAS_VOLTAGE_DISABLED: Bias voltage generator disabled + * @AD7793_BIAS_VOLTAGE_AIN1: Bias voltage connected to AIN1(-). + * @AD7793_BIAS_VOLTAGE_AIN2: Bias voltage connected to AIN2(-). + * @AD7793_BIAS_VOLTAGE_AIN3: Bias voltage connected to AIN3(-). + * Only valid for AD7795/AD7796. + */ +enum ad7793_bias_voltage { + AD7793_BIAS_VOLTAGE_DISABLED, + AD7793_BIAS_VOLTAGE_AIN1, + AD7793_BIAS_VOLTAGE_AIN2, + AD7793_BIAS_VOLTAGE_AIN3, +}; + +/** + * enum ad7793_refsel - AD7793 reference voltage selection + * @AD7793_REFSEL_REFIN1: External reference applied between REFIN1(+) + * and REFIN1(-). + * @AD7793_REFSEL_REFIN2: External reference applied between REFIN2(+) and + * and REFIN1(-). Only valid for AD7795/AD7796. + * @AD7793_REFSEL_INTERNAL: Internal 1.17 V reference. + */ +enum ad7793_refsel { + AD7793_REFSEL_REFIN1 = 0, + AD7793_REFSEL_REFIN2 = 1, + AD7793_REFSEL_INTERNAL = 2, +}; + +/** + * enum ad7793_current_source_direction - AD7793 excitation current direction + * @AD7793_IEXEC1_IOUT1_IEXEC2_IOUT2: Current source IEXC1 connected to pin + * IOUT1, current source IEXC2 connected to pin IOUT2. + * @AD7793_IEXEC1_IOUT2_IEXEC2_IOUT1: Current source IEXC2 connected to pin + * IOUT1, current source IEXC1 connected to pin IOUT2. + * @AD7793_IEXEC1_IEXEC2_IOUT1: Both current sources connected to pin IOUT1. + * Only valid when the current sources are set to 10 uA or 210 uA. + * @AD7793_IEXEC1_IEXEC2_IOUT2: Both current sources connected to Pin IOUT2. + * Only valid when the current ources are set to 10 uA or 210 uA. + */ +enum ad7793_current_source_direction { + AD7793_IEXEC1_IOUT1_IEXEC2_IOUT2 = 0, + AD7793_IEXEC1_IOUT2_IEXEC2_IOUT1 = 1, + AD7793_IEXEC1_IEXEC2_IOUT1 = 2, + AD7793_IEXEC1_IEXEC2_IOUT2 = 3, +}; + +/** + * enum ad7793_excitation_current - AD7793 excitation current selection + * @AD7793_IX_DISABLED: Excitation current Disabled. + * @AD7793_IX_10uA: Enable 10 micro-ampere excitation current. + * @AD7793_IX_210uA: Enable 210 micro-ampere excitation current. + * @AD7793_IX_1mA: Enable 1 milli-Ampere excitation current. + */ +enum ad7793_excitation_current { + AD7793_IX_DISABLED = 0, + AD7793_IX_10uA = 1, + AD7793_IX_210uA = 2, + AD7793_IX_1mA = 3, +}; + +/** + * struct ad7793_platform_data - AD7793 platform data + * @clock_src: Clock source selection + * @burnout_current: If set to true the 100nA burnout current is enabled. + * @boost_enable: Enable boost for the bias voltage generator. + * @buffered: If set to true configure the device for buffered input mode. + * @unipolar: If set to true sample in unipolar mode, if set to false sample in + * bipolar mode. + * @refsel: Reference voltage selection + * @bias_voltage: Bias voltage selection + * @exitation_current: Excitation current selection + * @current_source_direction: Excitation current direction selection + */ +struct ad7793_platform_data { + enum ad7793_clock_source clock_src; + bool burnout_current; + bool boost_enable; + bool buffered; + bool unipolar; + + enum ad7793_refsel refsel; + enum ad7793_bias_voltage bias_voltage; + enum ad7793_excitation_current exitation_current; + enum ad7793_current_source_direction current_source_direction; +}; + +#endif /* IIO_ADC_AD7793_H_ */ diff --git a/kernel/include/linux/platform_data/ad7887.h b/kernel/include/linux/platform_data/ad7887.h new file mode 100644 index 000000000..1e06eac31 --- /dev/null +++ b/kernel/include/linux/platform_data/ad7887.h @@ -0,0 +1,26 @@ +/* + * AD7887 SPI ADC driver + * + * Copyright 2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ +#ifndef IIO_ADC_AD7887_H_ +#define IIO_ADC_AD7887_H_ + +/** + * struct ad7887_platform_data - AD7887 ADC driver platform data + * @en_dual: Whether to use dual channel mode. If set to true AIN1 becomes the + * second input channel, and Vref is internally connected to Vdd. If set to + * false the device is used in single channel mode and AIN1/Vref is used as + * VREF input. + * @use_onchip_ref: Whether to use the onchip reference. If set to true the + * internal 2.5V reference is used. If set to false a external reference is + * used. + */ +struct ad7887_platform_data { + bool en_dual; + bool use_onchip_ref; +}; + +#endif /* IIO_ADC_AD7887_H_ */ diff --git a/kernel/include/linux/platform_data/adau17x1.h b/kernel/include/linux/platform_data/adau17x1.h new file mode 100644 index 000000000..a81766cae --- /dev/null +++ b/kernel/include/linux/platform_data/adau17x1.h @@ -0,0 +1,109 @@ +/* + * Driver for ADAU1761/ADAU1461/ADAU1761/ADAU1961/ADAU1781/ADAU1781 codecs + * + * Copyright 2011-2014 Analog Devices Inc. + * Author: Lars-Peter Clausen <lars@metafoo.de> + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __LINUX_PLATFORM_DATA_ADAU17X1_H__ +#define __LINUX_PLATFORM_DATA_ADAU17X1_H__ + +/** + * enum adau17x1_micbias_voltage - Microphone bias voltage + * @ADAU17X1_MICBIAS_0_90_AVDD: 0.9 * AVDD + * @ADAU17X1_MICBIAS_0_65_AVDD: 0.65 * AVDD + */ +enum adau17x1_micbias_voltage { + ADAU17X1_MICBIAS_0_90_AVDD = 0, + ADAU17X1_MICBIAS_0_65_AVDD = 1, +}; + +/** + * enum adau1761_digmic_jackdet_pin_mode - Configuration of the JACKDET/MICIN pin + * @ADAU1761_DIGMIC_JACKDET_PIN_MODE_NONE: Disable the pin + * @ADAU1761_DIGMIC_JACKDET_PIN_MODE_DIGMIC: Configure the pin for usage as + * digital microphone input. + * @ADAU1761_DIGMIC_JACKDET_PIN_MODE_JACKDETECT: Configure the pin for jack + * insertion detection. + */ +enum adau1761_digmic_jackdet_pin_mode { + ADAU1761_DIGMIC_JACKDET_PIN_MODE_NONE, + ADAU1761_DIGMIC_JACKDET_PIN_MODE_DIGMIC, + ADAU1761_DIGMIC_JACKDET_PIN_MODE_JACKDETECT, +}; + +/** + * adau1761_jackdetect_debounce_time - Jack insertion detection debounce time + * @ADAU1761_JACKDETECT_DEBOUNCE_5MS: 5 milliseconds + * @ADAU1761_JACKDETECT_DEBOUNCE_10MS: 10 milliseconds + * @ADAU1761_JACKDETECT_DEBOUNCE_20MS: 20 milliseconds + * @ADAU1761_JACKDETECT_DEBOUNCE_40MS: 40 milliseconds + */ +enum adau1761_jackdetect_debounce_time { + ADAU1761_JACKDETECT_DEBOUNCE_5MS = 0, + ADAU1761_JACKDETECT_DEBOUNCE_10MS = 1, + ADAU1761_JACKDETECT_DEBOUNCE_20MS = 2, + ADAU1761_JACKDETECT_DEBOUNCE_40MS = 3, +}; + +/** + * enum adau1761_output_mode - Output mode configuration + * @ADAU1761_OUTPUT_MODE_HEADPHONE: Headphone output + * @ADAU1761_OUTPUT_MODE_HEADPHONE_CAPLESS: Capless headphone output + * @ADAU1761_OUTPUT_MODE_LINE: Line output + */ +enum adau1761_output_mode { + ADAU1761_OUTPUT_MODE_HEADPHONE, + ADAU1761_OUTPUT_MODE_HEADPHONE_CAPLESS, + ADAU1761_OUTPUT_MODE_LINE, +}; + +/** + * struct adau1761_platform_data - ADAU1761 Codec driver platform data + * @input_differential: If true the input pins will be configured in + * differential mode. + * @lineout_mode: Output mode for the LOUT/ROUT pins + * @headphone_mode: Output mode for the LHP/RHP pins + * @digmic_jackdetect_pin_mode: JACKDET/MICIN pin configuration + * @jackdetect_debounce_time: Jack insertion detection debounce time. + * Note: This value will only be used, if the JACKDET/MICIN pin is configured + * for jack insertion detection. + * @jackdetect_active_low: If true the jack insertion detection is active low. + * Othwise it will be active high. + * @micbias_voltage: Microphone voltage bias + */ +struct adau1761_platform_data { + bool input_differential; + enum adau1761_output_mode lineout_mode; + enum adau1761_output_mode headphone_mode; + + enum adau1761_digmic_jackdet_pin_mode digmic_jackdetect_pin_mode; + + enum adau1761_jackdetect_debounce_time jackdetect_debounce_time; + bool jackdetect_active_low; + + enum adau17x1_micbias_voltage micbias_voltage; +}; + +/** + * struct adau1781_platform_data - ADAU1781 Codec driver platform data + * @left_input_differential: If true configure the left input as + * differential input. + * @right_input_differential: If true configure the right input as differntial + * input. + * @use_dmic: If true configure the MIC pins as digital microphone pins instead + * of analog microphone pins. + * @micbias_voltage: Microphone voltage bias + */ +struct adau1781_platform_data { + bool left_input_differential; + bool right_input_differential; + + bool use_dmic; + + enum adau17x1_micbias_voltage micbias_voltage; +}; + +#endif diff --git a/kernel/include/linux/platform_data/adau1977.h b/kernel/include/linux/platform_data/adau1977.h new file mode 100644 index 000000000..bed11d908 --- /dev/null +++ b/kernel/include/linux/platform_data/adau1977.h @@ -0,0 +1,45 @@ +/* + * ADAU1977/ADAU1978/ADAU1979 driver + * + * Copyright 2014 Analog Devices Inc. + * Author: Lars-Peter Clausen <lars@metafoo.de> + * + * Licensed under the GPL-2. + */ + +#ifndef __LINUX_PLATFORM_DATA_ADAU1977_H__ +#define __LINUX_PLATFORM_DATA_ADAU1977_H__ + +/** + * enum adau1977_micbias - ADAU1977 MICBIAS pin voltage setting + * @ADAU1977_MICBIAS_5V0: MICBIAS is set to 5.0 V + * @ADAU1977_MICBIAS_5V5: MICBIAS is set to 5.5 V + * @ADAU1977_MICBIAS_6V0: MICBIAS is set to 6.0 V + * @ADAU1977_MICBIAS_6V5: MICBIAS is set to 6.5 V + * @ADAU1977_MICBIAS_7V0: MICBIAS is set to 7.0 V + * @ADAU1977_MICBIAS_7V5: MICBIAS is set to 7.5 V + * @ADAU1977_MICBIAS_8V0: MICBIAS is set to 8.0 V + * @ADAU1977_MICBIAS_8V5: MICBIAS is set to 8.5 V + * @ADAU1977_MICBIAS_9V0: MICBIAS is set to 9.0 V + */ +enum adau1977_micbias { + ADAU1977_MICBIAS_5V0 = 0x0, + ADAU1977_MICBIAS_5V5 = 0x1, + ADAU1977_MICBIAS_6V0 = 0x2, + ADAU1977_MICBIAS_6V5 = 0x3, + ADAU1977_MICBIAS_7V0 = 0x4, + ADAU1977_MICBIAS_7V5 = 0x5, + ADAU1977_MICBIAS_8V0 = 0x6, + ADAU1977_MICBIAS_8V5 = 0x7, + ADAU1977_MICBIAS_9V0 = 0x8, +}; + +/** + * struct adau1977_platform_data - Platform configuration data for the ADAU1977 + * @micbias: Specifies the voltage for the MICBIAS pin + */ +struct adau1977_platform_data { + enum adau1977_micbias micbias; +}; + +#endif diff --git a/kernel/include/linux/platform_data/ads7828.h b/kernel/include/linux/platform_data/ads7828.h new file mode 100644 index 000000000..3245f45f9 --- /dev/null +++ b/kernel/include/linux/platform_data/ads7828.h @@ -0,0 +1,29 @@ +/* + * TI ADS7828 A/D Converter platform data definition + * + * Copyright (c) 2012 Savoir-faire Linux Inc. + * Vivien Didelot <vivien.didelot@savoirfairelinux.com> + * + * For further information, see the Documentation/hwmon/ads7828 file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _PDATA_ADS7828_H +#define _PDATA_ADS7828_H + +/** + * struct ads7828_platform_data - optional ADS7828 connectivity info + * @diff_input: Differential input mode. + * @ext_vref: Use an external voltage reference. + * @vref_mv: Voltage reference value, if external. + */ +struct ads7828_platform_data { + bool diff_input; + bool ext_vref; + unsigned int vref_mv; +}; + +#endif /* _PDATA_ADS7828_H */ diff --git a/kernel/include/linux/platform_data/arm-ux500-pm.h b/kernel/include/linux/platform_data/arm-ux500-pm.h new file mode 100644 index 000000000..8dff64b29 --- /dev/null +++ b/kernel/include/linux/platform_data/arm-ux500-pm.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) ST-Ericsson SA 2010-2013 + * Author: Rickard Andersson <rickard.andersson@stericsson.com> for + * ST-Ericsson. + * Author: Daniel Lezcano <daniel.lezcano@linaro.org> for Linaro. + * License terms: GNU General Public License (GPL) version 2 + * + */ + +#ifndef ARM_UX500_PM_H +#define ARM_UX500_PM_H + +int prcmu_gic_decouple(void); +int prcmu_gic_recouple(void); +bool prcmu_gic_pending_irq(void); +bool prcmu_pending_irq(void); +bool prcmu_is_cpu_in_wfi(int cpu); +int prcmu_copy_gic_settings(void); +void ux500_pm_init(u32 phy_base, u32 size); + +#endif /* ARM_UX500_PM_H */ diff --git a/kernel/include/linux/platform_data/asoc-imx-ssi.h b/kernel/include/linux/platform_data/asoc-imx-ssi.h new file mode 100644 index 000000000..92c7fd72f --- /dev/null +++ b/kernel/include/linux/platform_data/asoc-imx-ssi.h @@ -0,0 +1,23 @@ +#ifndef __MACH_SSI_H +#define __MACH_SSI_H + +struct snd_ac97; + +extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end; +extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer; + +struct imx_ssi_platform_data { + unsigned int flags; +#define IMX_SSI_DMA (1 << 0) +#define IMX_SSI_USE_AC97 (1 << 1) +#define IMX_SSI_NET (1 << 2) +#define IMX_SSI_SYN (1 << 3) +#define IMX_SSI_USE_I2S_SLAVE (1 << 4) + void (*ac97_reset) (struct snd_ac97 *ac97); + void (*ac97_warm_reset)(struct snd_ac97 *ac97); +}; + +extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type); + +#endif /* __MACH_SSI_H */ + diff --git a/kernel/include/linux/platform_data/asoc-kirkwood.h b/kernel/include/linux/platform_data/asoc-kirkwood.h new file mode 100644 index 000000000..d6a55bd2e --- /dev/null +++ b/kernel/include/linux/platform_data/asoc-kirkwood.h @@ -0,0 +1,7 @@ +#ifndef __PLAT_AUDIO_H +#define __PLAT_AUDIO_H + +struct kirkwood_asoc_platform_data { + int burst; +}; +#endif diff --git a/kernel/include/linux/platform_data/asoc-mx27vis.h b/kernel/include/linux/platform_data/asoc-mx27vis.h new file mode 100644 index 000000000..409adcd04 --- /dev/null +++ b/kernel/include/linux/platform_data/asoc-mx27vis.h @@ -0,0 +1,11 @@ +#ifndef __PLATFORM_DATA_ASOC_MX27VIS_H +#define __PLATFORM_DATA_ASOC_MX27VIS_H + +struct snd_mx27vis_platform_data { + int amp_gain0_gpio; + int amp_gain1_gpio; + int amp_mutel_gpio; + int amp_muter_gpio; +}; + +#endif /* __PLATFORM_DATA_ASOC_MX27VIS_H */ diff --git a/kernel/include/linux/platform_data/asoc-palm27x.h b/kernel/include/linux/platform_data/asoc-palm27x.h new file mode 100644 index 000000000..58afb30d5 --- /dev/null +++ b/kernel/include/linux/platform_data/asoc-palm27x.h @@ -0,0 +1,8 @@ +#ifndef _INCLUDE_PALMASOC_H_ +#define _INCLUDE_PALMASOC_H_ + +struct palm27x_asoc_info { + int jack_gpio; +}; + +#endif diff --git a/kernel/include/linux/platform_data/asoc-s3c.h b/kernel/include/linux/platform_data/asoc-s3c.h new file mode 100644 index 000000000..5e0bc779e --- /dev/null +++ b/kernel/include/linux/platform_data/asoc-s3c.h @@ -0,0 +1,45 @@ +/* + * Copyright (c) 2009 Samsung Electronics Co. Ltd + * Author: Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* The machine init code calls s3c*_ac97_setup_gpio with + * one of these defines in order to select appropriate bank + * of GPIO for AC97 pins + */ +#define S3C64XX_AC97_GPD 0 +#define S3C64XX_AC97_GPE 1 +extern void s3c64xx_ac97_setup_gpio(int); + +struct samsung_i2s { +/* If the Primary DAI has 5.1 Channels */ +#define QUIRK_PRI_6CHAN (1 << 0) +/* If the I2S block has a Stereo Overlay Channel */ +#define QUIRK_SEC_DAI (1 << 1) +/* + * If the I2S block has no internal prescalar or MUX (I2SMOD[10] bit) + * The Machine driver must provide suitably set clock to the I2S block. + */ +#define QUIRK_NO_MUXPSR (1 << 2) +#define QUIRK_NEED_RSTCLR (1 << 3) +#define QUIRK_SUPPORTS_TDM (1 << 4) +#define QUIRK_SUPPORTS_IDMA (1 << 5) + /* Quirks of the I2S controller */ + u32 quirks; + dma_addr_t idma_addr; +}; + +/** + * struct s3c_audio_pdata - common platform data for audio device drivers + * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode + */ +struct s3c_audio_pdata { + int (*cfg_gpio)(struct platform_device *); + union { + struct samsung_i2s i2s; + } type; +}; diff --git a/kernel/include/linux/platform_data/asoc-s3c24xx_simtec.h b/kernel/include/linux/platform_data/asoc-s3c24xx_simtec.h new file mode 100644 index 000000000..d220e5412 --- /dev/null +++ b/kernel/include/linux/platform_data/asoc-s3c24xx_simtec.h @@ -0,0 +1,33 @@ +/* + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Simtec Audio support. +*/ + +/** + * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio + * @use_mpllin: Select codec clock from MPLLin + * @output_cdclk: Need to output CDCLK to the codec + * @have_mic: Set if we have a MIC socket + * @have_lout: Set if we have a LineOut socket + * @amp_gpio: GPIO pin to enable the AMP + * @amp_gain: Option GPIO to control AMP gain + */ +struct s3c24xx_audio_simtec_pdata { + unsigned int use_mpllin:1; + unsigned int output_cdclk:1; + + unsigned int have_mic:1; + unsigned int have_lout:1; + + int amp_gpio; + int amp_gain[2]; + + void (*startup)(void); +}; diff --git a/kernel/include/linux/platform_data/asoc-ti-mcbsp.h b/kernel/include/linux/platform_data/asoc-ti-mcbsp.h new file mode 100644 index 000000000..3c73c045f --- /dev/null +++ b/kernel/include/linux/platform_data/asoc-ti-mcbsp.h @@ -0,0 +1,58 @@ +/* + * Defines for Multi-Channel Buffered Serial Port + * + * Copyright (C) 2002 RidgeRun, Inc. + * Author: Steve Johnson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __ASOC_TI_MCBSP_H +#define __ASOC_TI_MCBSP_H + +#include <linux/spinlock.h> +#include <linux/clk.h> + +#define MCBSP_CONFIG_TYPE2 0x2 +#define MCBSP_CONFIG_TYPE3 0x3 +#define MCBSP_CONFIG_TYPE4 0x4 + +/* Platform specific configuration */ +struct omap_mcbsp_ops { + void (*request)(unsigned int); + void (*free)(unsigned int); +}; + +struct omap_mcbsp_platform_data { + struct omap_mcbsp_ops *ops; + u16 buffer_size; + u8 reg_size; + u8 reg_step; + + /* McBSP platform and instance specific features */ + bool has_wakeup; /* Wakeup capability */ + bool has_ccr; /* Transceiver has configuration control registers */ + int (*enable_st_clock)(unsigned int, bool); +}; + +/** + * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod + * @sidetone: name of the sidetone device + */ +struct omap_mcbsp_dev_attr { + const char *sidetone; +}; + +#endif diff --git a/kernel/include/linux/platform_data/asoc-ux500-msp.h b/kernel/include/linux/platform_data/asoc-ux500-msp.h new file mode 100644 index 000000000..2f34bb98f --- /dev/null +++ b/kernel/include/linux/platform_data/asoc-ux500-msp.h @@ -0,0 +1,20 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL), version 2. + */ + +#ifndef __MSP_H +#define __MSP_H + +#include <linux/platform_data/dma-ste-dma40.h> + +/* Platform data structure for a MSP I2S-device */ +struct msp_i2s_platform_data { + int id; + struct stedma40_chan_cfg *msp_i2s_dma_rx; + struct stedma40_chan_cfg *msp_i2s_dma_tx; +}; + +#endif diff --git a/kernel/include/linux/platform_data/at24.h b/kernel/include/linux/platform_data/at24.h new file mode 100644 index 000000000..c42aa89d3 --- /dev/null +++ b/kernel/include/linux/platform_data/at24.h @@ -0,0 +1,55 @@ +/* + * at24.h - platform_data for the at24 (generic eeprom) driver + * (C) Copyright 2008 by Pengutronix + * (C) Copyright 2012 by Wolfram Sang + * same license as the driver + */ + +#ifndef _LINUX_AT24_H +#define _LINUX_AT24_H + +#include <linux/types.h> +#include <linux/memory.h> + +/** + * struct at24_platform_data - data to set up at24 (generic eeprom) driver + * @byte_len: size of eeprom in byte + * @page_size: number of byte which can be written in one go + * @flags: tunable options, check AT24_FLAG_* defines + * @setup: an optional callback invoked after eeprom is probed; enables kernel + code to access eeprom via memory_accessor, see example + * @context: optional parameter passed to setup() + * + * If you set up a custom eeprom type, please double-check the parameters. + * Especially page_size needs extra care, as you risk data loss if your value + * is bigger than what the chip actually supports! + * + * An example in pseudo code for a setup() callback: + * + * void get_mac_addr(struct memory_accessor *mem_acc, void *context) + * { + * u8 *mac_addr = ethernet_pdata->mac_addr; + * off_t offset = context; + * + * // Read MAC addr from EEPROM + * if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN) + * pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); + * } + * + * This function pointer and context can now be set up in at24_platform_data. + */ + +struct at24_platform_data { + u32 byte_len; /* size (sum of all addr) */ + u16 page_size; /* for writes */ + u8 flags; +#define AT24_FLAG_ADDR16 0x80 /* address pointer is 16 bit */ +#define AT24_FLAG_READONLY 0x40 /* sysfs-entry will be read-only */ +#define AT24_FLAG_IRUGO 0x20 /* sysfs-entry will be world-readable */ +#define AT24_FLAG_TAKE8ADDR 0x10 /* take always 8 addresses (24c00) */ + + void (*setup)(struct memory_accessor *, void *context); + void *context; +}; + +#endif /* _LINUX_AT24_H */ diff --git a/kernel/include/linux/platform_data/at91_adc.h b/kernel/include/linux/platform_data/at91_adc.h new file mode 100644 index 000000000..7819fc787 --- /dev/null +++ b/kernel/include/linux/platform_data/at91_adc.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2011 Free Electrons + * + * Licensed under the GPLv2 or later. + */ + +#ifndef _AT91_ADC_H_ +#define _AT91_ADC_H_ + +enum atmel_adc_ts_type { + ATMEL_ADC_TOUCHSCREEN_NONE = 0, + ATMEL_ADC_TOUCHSCREEN_4WIRE = 4, + ATMEL_ADC_TOUCHSCREEN_5WIRE = 5, +}; + +/** + * struct at91_adc_trigger - description of triggers + * @name: name of the trigger advertised to the user + * @value: value to set in the ADC's trigger setup register + to enable the trigger + * @is_external: Does the trigger rely on an external pin? + */ +struct at91_adc_trigger { + const char *name; + u8 value; + bool is_external; +}; + +/** + * struct at91_adc_data - platform data for ADC driver + * @channels_used: channels in use on the board as a bitmask + * @startup_time: startup time of the ADC in microseconds + * @trigger_list: Triggers available in the ADC + * @trigger_number: Number of triggers available in the ADC + * @use_external_triggers: does the board has external triggers availables + * @vref: Reference voltage for the ADC in millivolts + * @touchscreen_type: If a touchscreen is connected, its type (4 or 5 wires) + */ +struct at91_adc_data { + unsigned long channels_used; + u8 startup_time; + struct at91_adc_trigger *trigger_list; + u8 trigger_number; + bool use_external_triggers; + u16 vref; + enum atmel_adc_ts_type touchscreen_type; +}; + +extern void __init at91_add_device_adc(struct at91_adc_data *data); +#endif diff --git a/kernel/include/linux/platform_data/ata-pxa.h b/kernel/include/linux/platform_data/ata-pxa.h new file mode 100644 index 000000000..6cf7df1d5 --- /dev/null +++ b/kernel/include/linux/platform_data/ata-pxa.h @@ -0,0 +1,33 @@ +/* + * Generic PXA PATA driver + * + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __MACH_PATA_PXA_H__ +#define __MACH_PATA_PXA_H__ + +struct pata_pxa_pdata { + /* PXA DMA DREQ<0:2> pin */ + uint32_t dma_dreq; + /* Register shift */ + uint32_t reg_shift; + /* IRQ flags */ + uint32_t irq_flags; +}; + +#endif /* __MACH_PATA_PXA_H__ */ diff --git a/kernel/include/linux/platform_data/ata-samsung_cf.h b/kernel/include/linux/platform_data/ata-samsung_cf.h new file mode 100644 index 000000000..748e71642 --- /dev/null +++ b/kernel/include/linux/platform_data/ata-samsung_cf.h @@ -0,0 +1,34 @@ +/* + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung CF-ATA platform_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ATA_SAMSUNG_CF_H +#define __ATA_SAMSUNG_CF_H __FILE__ + +/** + * struct s3c_ide_platdata - S3C IDE driver platform data. + * @setup_gpio: Setup the external GPIO pins to the right state for data + * transfer in true-ide mode. + */ +struct s3c_ide_platdata { + void (*setup_gpio)(void); +}; + +/* + * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver. + * @pdata: Platform data for IDE driver. + */ +extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata); + +/* architecture-specific IDE configuration */ +extern void s3c64xx_ide_setup_gpio(void); +extern void s5pv210_ide_setup_gpio(void); + +#endif /*__ATA_SAMSUNG_CF_H */ diff --git a/kernel/include/linux/platform_data/atmel.h b/kernel/include/linux/platform_data/atmel.h new file mode 100644 index 000000000..4b452c6a2 --- /dev/null +++ b/kernel/include/linux/platform_data/atmel.h @@ -0,0 +1,97 @@ +/* + * atmel platform data + * + * GPL v2 Only + */ + +#ifndef __ATMEL_H__ +#define __ATMEL_H__ + +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/leds.h> +#include <linux/spi/spi.h> +#include <linux/usb/atmel_usba_udc.h> +#include <linux/atmel-mci.h> +#include <sound/atmel-ac97c.h> +#include <linux/serial.h> +#include <linux/platform_data/macb.h> + +/* + * at91: 6 USARTs and one DBGU port (SAM9260) + * avr32: 4 + */ +#define ATMEL_MAX_UART 7 + + /* USB Device */ +struct at91_udc_data { + int vbus_pin; /* high == host powering us */ + u8 vbus_active_low; /* vbus polarity */ + u8 vbus_polled; /* Use polling, not interrupt */ + int pullup_pin; /* active == D+ pulled up */ + u8 pullup_active_low; /* true == pullup_pin is active low */ +}; + + /* Compact Flash */ +struct at91_cf_data { + int irq_pin; /* I/O IRQ */ + int det_pin; /* Card detect */ + int vcc_pin; /* power switching */ + int rst_pin; /* card reset */ + u8 chipselect; /* EBI Chip Select number */ + u8 flags; +#define AT91_CF_TRUE_IDE 0x01 +#define AT91_IDE_SWAP_A0_A2 0x02 +}; + + /* USB Host */ +#define AT91_MAX_USBH_PORTS 3 +struct at91_usbh_data { + int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */ + int overcurrent_pin[AT91_MAX_USBH_PORTS]; + u8 ports; /* number of ports on root hub */ + u8 overcurrent_supported; + u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS]; + u8 overcurrent_status[AT91_MAX_USBH_PORTS]; + u8 overcurrent_changed[AT91_MAX_USBH_PORTS]; +}; + + /* NAND / SmartMedia */ +struct atmel_nand_data { + int enable_pin; /* chip enable */ + int det_pin; /* card detect */ + int rdy_pin; /* ready/busy */ + u8 rdy_pin_active_low; /* rdy_pin value is inverted */ + u8 ale; /* address line number connected to ALE */ + u8 cle; /* address line number connected to CLE */ + u8 bus_width_16; /* buswidth is 16 bit */ + u8 ecc_mode; /* ecc mode */ + u8 on_flash_bbt; /* bbt on flash */ + struct mtd_partition *parts; + unsigned int num_parts; + bool has_dma; /* support dma transfer */ + + /* default is false, only for at32ap7000 chip is true */ + bool need_reset_workaround; +}; + + /* Serial */ +struct atmel_uart_data { + int num; /* port num */ + short use_dma_tx; /* use transmit DMA? */ + short use_dma_rx; /* use receive DMA? */ + void __iomem *regs; /* virt. base address, if any */ + struct serial_rs485 rs485; /* rs485 settings */ +}; + +/* CAN */ +struct at91_can_data { + void (*transceiver_switch)(int on); +}; + +/* FIXME: this needs a better location, but gets stuff building again */ +extern int at91_suspend_entering_slow_clock(void); + +#endif /* __ATMEL_H__ */ diff --git a/kernel/include/linux/platform_data/bcmgenet.h b/kernel/include/linux/platform_data/bcmgenet.h new file mode 100644 index 000000000..26af54321 --- /dev/null +++ b/kernel/include/linux/platform_data/bcmgenet.h @@ -0,0 +1,18 @@ +#ifndef __LINUX_PLATFORM_DATA_BCMGENET_H__ +#define __LINUX_PLATFORM_DATA_BCMGENET_H__ + +#include <linux/types.h> +#include <linux/if_ether.h> +#include <linux/phy.h> + +struct bcmgenet_platform_data { + bool mdio_enabled; + phy_interface_t phy_interface; + int phy_address; + int phy_speed; + int phy_duplex; + u8 mac_address[ETH_ALEN]; + int genet_version; +}; + +#endif diff --git a/kernel/include/linux/platform_data/bd6107.h b/kernel/include/linux/platform_data/bd6107.h new file mode 100644 index 000000000..671d6502d --- /dev/null +++ b/kernel/include/linux/platform_data/bd6107.h @@ -0,0 +1,19 @@ +/* + * bd6107.h - Rohm BD6107 LEDs Driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __BD6107_H__ +#define __BD6107_H__ + +struct device; + +struct bd6107_platform_data { + struct device *fbdev; + int reset; /* Reset GPIO */ + unsigned int def_value; +}; + +#endif diff --git a/kernel/include/linux/platform_data/bfin_rotary.h b/kernel/include/linux/platform_data/bfin_rotary.h new file mode 100644 index 000000000..98829370f --- /dev/null +++ b/kernel/include/linux/platform_data/bfin_rotary.h @@ -0,0 +1,117 @@ +/* + * board initialization should put one of these structures into platform_data + * and place the bfin-rotary onto platform_bus named "bfin-rotary". + * + * Copyright 2008-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _BFIN_ROTARY_H +#define _BFIN_ROTARY_H + +/* mode bitmasks */ +#define ROT_QUAD_ENC CNTMODE_QUADENC /* quadrature/grey code encoder mode */ +#define ROT_BIN_ENC CNTMODE_BINENC /* binary encoder mode */ +#define ROT_UD_CNT CNTMODE_UDCNT /* rotary counter mode */ +#define ROT_DIR_CNT CNTMODE_DIRCNT /* direction counter mode */ + +#define ROT_DEBE DEBE /* Debounce Enable */ + +#define ROT_CDGINV CDGINV /* CDG Pin Polarity Invert */ +#define ROT_CUDINV CUDINV /* CUD Pin Polarity Invert */ +#define ROT_CZMINV CZMINV /* CZM Pin Polarity Invert */ + +struct bfin_rotary_platform_data { + /* set rotary UP KEY_### or BTN_### in case you prefer + * bfin-rotary to send EV_KEY otherwise set 0 + */ + unsigned int rotary_up_key; + /* set rotary DOWN KEY_### or BTN_### in case you prefer + * bfin-rotary to send EV_KEY otherwise set 0 + */ + unsigned int rotary_down_key; + /* set rotary BUTTON KEY_### or BTN_### */ + unsigned int rotary_button_key; + /* set rotary Relative Axis REL_### in case you prefer + * bfin-rotary to send EV_REL otherwise set 0 + */ + unsigned int rotary_rel_code; + unsigned short debounce; /* 0..17 */ + unsigned short mode; + unsigned short pm_wakeup; + unsigned short *pin_list; +}; + +/* CNT_CONFIG bitmasks */ +#define CNTE (1 << 0) /* Counter Enable */ +#define DEBE (1 << 1) /* Debounce Enable */ +#define CDGINV (1 << 4) /* CDG Pin Polarity Invert */ +#define CUDINV (1 << 5) /* CUD Pin Polarity Invert */ +#define CZMINV (1 << 6) /* CZM Pin Polarity Invert */ +#define CNTMODE_SHIFT 8 +#define CNTMODE (0x7 << CNTMODE_SHIFT) /* Counter Operating Mode */ +#define ZMZC (1 << 1) /* CZM Zeroes Counter Enable */ +#define BNDMODE_SHIFT 12 +#define BNDMODE (0x3 << BNDMODE_SHIFT) /* Boundary register Mode */ +#define INPDIS (1 << 15) /* CUG and CDG Input Disable */ + +#define CNTMODE_QUADENC (0 << CNTMODE_SHIFT) /* quadrature encoder mode */ +#define CNTMODE_BINENC (1 << CNTMODE_SHIFT) /* binary encoder mode */ +#define CNTMODE_UDCNT (2 << CNTMODE_SHIFT) /* up/down counter mode */ +#define CNTMODE_DIRCNT (4 << CNTMODE_SHIFT) /* direction counter mode */ +#define CNTMODE_DIRTMR (5 << CNTMODE_SHIFT) /* direction timer mode */ + +#define BNDMODE_COMP (0 << BNDMODE_SHIFT) /* boundary compare mode */ +#define BNDMODE_ZERO (1 << BNDMODE_SHIFT) /* boundary compare and zero mode */ +#define BNDMODE_CAPT (2 << BNDMODE_SHIFT) /* boundary capture mode */ +#define BNDMODE_AEXT (3 << BNDMODE_SHIFT) /* boundary auto-extend mode */ + +/* CNT_IMASK bitmasks */ +#define ICIE (1 << 0) /* Illegal Gray/Binary Code Interrupt Enable */ +#define UCIE (1 << 1) /* Up count Interrupt Enable */ +#define DCIE (1 << 2) /* Down count Interrupt Enable */ +#define MINCIE (1 << 3) /* Min Count Interrupt Enable */ +#define MAXCIE (1 << 4) /* Max Count Interrupt Enable */ +#define COV31IE (1 << 5) /* Bit 31 Overflow Interrupt Enable */ +#define COV15IE (1 << 6) /* Bit 15 Overflow Interrupt Enable */ +#define CZEROIE (1 << 7) /* Count to Zero Interrupt Enable */ +#define CZMIE (1 << 8) /* CZM Pin Interrupt Enable */ +#define CZMEIE (1 << 9) /* CZM Error Interrupt Enable */ +#define CZMZIE (1 << 10) /* CZM Zeroes Counter Interrupt Enable */ + +/* CNT_STATUS bitmasks */ +#define ICII (1 << 0) /* Illegal Gray/Binary Code Interrupt Identifier */ +#define UCII (1 << 1) /* Up count Interrupt Identifier */ +#define DCII (1 << 2) /* Down count Interrupt Identifier */ +#define MINCII (1 << 3) /* Min Count Interrupt Identifier */ +#define MAXCII (1 << 4) /* Max Count Interrupt Identifier */ +#define COV31II (1 << 5) /* Bit 31 Overflow Interrupt Identifier */ +#define COV15II (1 << 6) /* Bit 15 Overflow Interrupt Identifier */ +#define CZEROII (1 << 7) /* Count to Zero Interrupt Identifier */ +#define CZMII (1 << 8) /* CZM Pin Interrupt Identifier */ +#define CZMEII (1 << 9) /* CZM Error Interrupt Identifier */ +#define CZMZII (1 << 10) /* CZM Zeroes Counter Interrupt Identifier */ + +/* CNT_COMMAND bitmasks */ +#define W1LCNT 0xf /* Load Counter Register */ +#define W1LMIN 0xf0 /* Load Min Register */ +#define W1LMAX 0xf00 /* Load Max Register */ +#define W1ZMONCE (1 << 12) /* Enable CZM Clear Counter Once */ + +#define W1LCNT_ZERO (1 << 0) /* write 1 to load CNT_COUNTER with zero */ +#define W1LCNT_MIN (1 << 2) /* write 1 to load CNT_COUNTER from CNT_MIN */ +#define W1LCNT_MAX (1 << 3) /* write 1 to load CNT_COUNTER from CNT_MAX */ + +#define W1LMIN_ZERO (1 << 4) /* write 1 to load CNT_MIN with zero */ +#define W1LMIN_CNT (1 << 5) /* write 1 to load CNT_MIN from CNT_COUNTER */ +#define W1LMIN_MAX (1 << 7) /* write 1 to load CNT_MIN from CNT_MAX */ + +#define W1LMAX_ZERO (1 << 8) /* write 1 to load CNT_MAX with zero */ +#define W1LMAX_CNT (1 << 9) /* write 1 to load CNT_MAX from CNT_COUNTER */ +#define W1LMAX_MIN (1 << 10) /* write 1 to load CNT_MAX from CNT_MIN */ + +/* CNT_DEBOUNCE bitmasks */ +#define DPRESCALE 0xf /* Load Counter Register */ + +#endif diff --git a/kernel/include/linux/platform_data/brcmfmac-sdio.h b/kernel/include/linux/platform_data/brcmfmac-sdio.h new file mode 100644 index 000000000..e75dcbf2b --- /dev/null +++ b/kernel/include/linux/platform_data/brcmfmac-sdio.h @@ -0,0 +1,135 @@ +/* + * Copyright (c) 2013 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _LINUX_BRCMFMAC_PLATFORM_H +#define _LINUX_BRCMFMAC_PLATFORM_H + +/* + * Platform specific driver functions and data. Through the platform specific + * device data functions can be provided to help the brcmfmac driver to + * operate with the device in combination with the used platform. + * + * Use the platform data in the following (similar) way: + * + * +#include <brcmfmac_platform.h> + + +static void brcmfmac_power_on(void) +{ +} + +static void brcmfmac_power_off(void) +{ +} + +static void brcmfmac_reset(void) +{ +} + +static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = { + .power_on = brcmfmac_power_on, + .power_off = brcmfmac_power_off, + .reset = brcmfmac_reset +}; + +static struct platform_device brcmfmac_device = { + .name = BRCMFMAC_SDIO_PDATA_NAME, + .id = PLATFORM_DEVID_NONE, + .dev.platform_data = &brcmfmac_sdio_pdata +}; + +void __init brcmfmac_init_pdata(void) +{ + brcmfmac_sdio_pdata.oob_irq_supported = true; + brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB); + brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ | + IORESOURCE_IRQ_HIGHLEVEL; + platform_device_register(&brcmfmac_device); +} + * + * + * Note: the brcmfmac can be loaded as module or be statically built-in into + * the kernel. If built-in then do note that it uses module_init (and + * module_exit) routines which equal device_initcall. So if you intend to + * create a module with the platform specific data for the brcmfmac and have + * it built-in to the kernel then use a higher initcall then device_initcall + * (see init.h). If this is not done then brcmfmac will load without problems + * but will not pickup the platform data. + * + * When the driver does not "detect" platform driver data then it will continue + * without reporting anything and just assume there is no data needed. Which is + * probably true for most platforms. + * + * Explanation of the platform_data fields: + * + * drive_strength: is the preferred drive_strength to be used for the SDIO + * pins. If 0 then a default value will be used. This is the target drive + * strength, the exact drive strength which will be used depends on the + * capabilities of the device. + * + * oob_irq_supported: does the board have support for OOB interrupts. SDIO + * in-band interrupts are relatively slow and for having less overhead on + * interrupt processing an out of band interrupt can be used. If the HW + * supports this then enable this by setting this field to true and configure + * the oob related fields. + * + * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are + * used for registering the irq using request_irq function. + * + * broken_sg_support: flag for broken sg list support of SDIO host controller. + * Set this to true if the SDIO host controller has higher align requirement + * than 32 bytes for each scatterlist item. + * + * sd_head_align: alignment requirement for start of data buffer + * + * sd_sgentry_align: length alignment requirement for each sg entry + * + * power_on: This function is called by the brcmfmac when the module gets + * loaded. This can be particularly useful for low power devices. The platform + * spcific routine may for example decide to power up the complete device. + * If there is no use-case for this function then provide NULL. + * + * power_off: This function is called by the brcmfmac when the module gets + * unloaded. At this point the device can be powered down or otherwise be reset. + * So if an actual power_off is not supported but reset is then reset the device + * when this function gets called. This can be particularly useful for low power + * devices. If there is no use-case for this function (either power-down or + * reset) then provide NULL. + * + * reset: This function can get called if the device communication broke down. + * This functionality is particularly useful in case of SDIO type devices. It is + * possible to reset a dongle via sdio data interface, but it requires that + * this is fully functional. This function is chip/module specific and this + * function should return only after the complete reset has completed. + */ + +#define BRCMFMAC_SDIO_PDATA_NAME "brcmfmac_sdio" + +struct brcmfmac_sdio_platform_data { + unsigned int drive_strength; + bool oob_irq_supported; + unsigned int oob_irq_nr; + unsigned long oob_irq_flags; + bool broken_sg_support; + unsigned short sd_head_align; + unsigned short sd_sgentry_align; + void (*power_on)(void); + void (*power_off)(void); + void (*reset)(void); +}; + +#endif /* _LINUX_BRCMFMAC_PLATFORM_H */ diff --git a/kernel/include/linux/platform_data/bt-nokia-h4p.h b/kernel/include/linux/platform_data/bt-nokia-h4p.h new file mode 100644 index 000000000..30d169dfa --- /dev/null +++ b/kernel/include/linux/platform_data/bt-nokia-h4p.h @@ -0,0 +1,38 @@ +/* + * This file is part of Nokia H4P bluetooth driver + * + * Copyright (C) 2010 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + + +/** + * struct hci_h4p_platform data - hci_h4p Platform data structure + */ +struct hci_h4p_platform_data { + int chip_type; + int bt_sysclk; + unsigned int bt_wakeup_gpio; + unsigned int host_wakeup_gpio; + unsigned int reset_gpio; + int reset_gpio_shared; + unsigned int uart_irq; + phys_addr_t uart_base; + const char *uart_iclk; + const char *uart_fclk; + void (*set_pm_limits)(struct device *dev, bool set); +}; diff --git a/kernel/include/linux/platform_data/camera-mx2.h b/kernel/include/linux/platform_data/camera-mx2.h new file mode 100644 index 000000000..7ded6f1f7 --- /dev/null +++ b/kernel/include/linux/platform_data/camera-mx2.h @@ -0,0 +1,44 @@ +/* + * mx2-cam.h - i.MX27/i.MX25 camera driver header file + * + * Copyright (C) 2003, Intel Corporation + * Copyright (C) 2008, Sascha Hauer <s.hauer@pengutronix.de> + * Copyright (C) 2010, Baruch Siach <baruch@tkos.co.il> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __MACH_MX2_CAM_H_ +#define __MACH_MX2_CAM_H_ + +#define MX2_CAMERA_EXT_VSYNC (1 << 1) +#define MX2_CAMERA_CCIR (1 << 2) +#define MX2_CAMERA_CCIR_INTERLACE (1 << 3) +#define MX2_CAMERA_HSYNC_HIGH (1 << 4) +#define MX2_CAMERA_GATED_CLOCK (1 << 5) +#define MX2_CAMERA_INV_DATA (1 << 6) +#define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7) + +/** + * struct mx2_camera_platform_data - optional platform data for mx2_camera + * @flags: any combination of MX2_CAMERA_* + * @clk: clock rate of the csi block / 2 + */ +struct mx2_camera_platform_data { + unsigned long flags; + unsigned long clk; +}; + +#endif /* __MACH_MX2_CAM_H_ */ diff --git a/kernel/include/linux/platform_data/camera-mx3.h b/kernel/include/linux/platform_data/camera-mx3.h new file mode 100644 index 000000000..a910dadc8 --- /dev/null +++ b/kernel/include/linux/platform_data/camera-mx3.h @@ -0,0 +1,52 @@ +/* + * mx3_camera.h - i.MX3x camera driver header file + * + * Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MX3_CAMERA_H_ +#define _MX3_CAMERA_H_ + +#include <linux/device.h> + +#define MX3_CAMERA_CLK_SRC 1 +#define MX3_CAMERA_EXT_VSYNC 2 +#define MX3_CAMERA_DP 4 +#define MX3_CAMERA_PCP 8 +#define MX3_CAMERA_HSP 0x10 +#define MX3_CAMERA_VSP 0x20 +#define MX3_CAMERA_DATAWIDTH_4 0x40 +#define MX3_CAMERA_DATAWIDTH_8 0x80 +#define MX3_CAMERA_DATAWIDTH_10 0x100 +#define MX3_CAMERA_DATAWIDTH_15 0x200 + +#define MX3_CAMERA_DATAWIDTH_MASK (MX3_CAMERA_DATAWIDTH_4 | MX3_CAMERA_DATAWIDTH_8 | \ + MX3_CAMERA_DATAWIDTH_10 | MX3_CAMERA_DATAWIDTH_15) + +struct v4l2_async_subdev; + +/** + * struct mx3_camera_pdata - i.MX3x camera platform data + * @flags: MX3_CAMERA_* flags + * @mclk_10khz: master clock frequency in 10kHz units + * @dma_dev: IPU DMA device to match against in channel allocation + */ +struct mx3_camera_pdata { + unsigned long flags; + unsigned long mclk_10khz; + struct device *dma_dev; + struct v4l2_async_subdev **asd; /* Flat array, arranged in groups */ + int *asd_sizes; /* 0-terminated array of asd group sizes */ +}; + +#endif diff --git a/kernel/include/linux/platform_data/camera-pxa.h b/kernel/include/linux/platform_data/camera-pxa.h new file mode 100644 index 000000000..6709b1cd7 --- /dev/null +++ b/kernel/include/linux/platform_data/camera-pxa.h @@ -0,0 +1,44 @@ +/* + camera.h - PXA camera driver header file + + Copyright (C) 2003, Intel Corporation + Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __ASM_ARCH_CAMERA_H_ +#define __ASM_ARCH_CAMERA_H_ + +#define PXA_CAMERA_MASTER 1 +#define PXA_CAMERA_DATAWIDTH_4 2 +#define PXA_CAMERA_DATAWIDTH_5 4 +#define PXA_CAMERA_DATAWIDTH_8 8 +#define PXA_CAMERA_DATAWIDTH_9 0x10 +#define PXA_CAMERA_DATAWIDTH_10 0x20 +#define PXA_CAMERA_PCLK_EN 0x40 +#define PXA_CAMERA_MCLK_EN 0x80 +#define PXA_CAMERA_PCP 0x100 +#define PXA_CAMERA_HSP 0x200 +#define PXA_CAMERA_VSP 0x400 + +struct pxacamera_platform_data { + unsigned long flags; + unsigned long mclk_10khz; +}; + +extern void pxa_set_camera_info(struct pxacamera_platform_data *); + +#endif /* __ASM_ARCH_CAMERA_H_ */ diff --git a/kernel/include/linux/platform_data/camera-rcar.h b/kernel/include/linux/platform_data/camera-rcar.h new file mode 100644 index 000000000..dfc83c581 --- /dev/null +++ b/kernel/include/linux/platform_data/camera-rcar.h @@ -0,0 +1,25 @@ +/* + * Platform data for Renesas R-Car VIN soc-camera driver + * + * Copyright (C) 2011-2013 Renesas Solutions Corp. + * Copyright (C) 2013 Cogent Embedded, Inc., <source@cogentembedded.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __CAMERA_RCAR_H_ +#define __CAMERA_RCAR_H_ + +#define RCAR_VIN_HSYNC_ACTIVE_LOW (1 << 0) +#define RCAR_VIN_VSYNC_ACTIVE_LOW (1 << 1) +#define RCAR_VIN_BT601 (1 << 2) +#define RCAR_VIN_BT656 (1 << 3) + +struct rcar_vin_platform_data { + unsigned int flags; +}; + +#endif /* __CAMERA_RCAR_H_ */ diff --git a/kernel/include/linux/platform_data/clk-integrator.h b/kernel/include/linux/platform_data/clk-integrator.h new file mode 100644 index 000000000..addd48cac --- /dev/null +++ b/kernel/include/linux/platform_data/clk-integrator.h @@ -0,0 +1,2 @@ +void integrator_impd1_clk_init(void __iomem *base, unsigned int id); +void integrator_impd1_clk_exit(unsigned int id); diff --git a/kernel/include/linux/platform_data/clk-lpss.h b/kernel/include/linux/platform_data/clk-lpss.h new file mode 100644 index 000000000..23901992b --- /dev/null +++ b/kernel/include/linux/platform_data/clk-lpss.h @@ -0,0 +1,23 @@ +/* + * Intel Low Power Subsystem clocks. + * + * Copyright (C) 2013, Intel Corporation + * Authors: Mika Westerberg <mika.westerberg@linux.intel.com> + * Rafael J. Wysocki <rafael.j.wysocki@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __CLK_LPSS_H +#define __CLK_LPSS_H + +struct lpss_clk_data { + const char *name; + struct clk *clk; +}; + +extern int lpt_clk_init(void); + +#endif /* __CLK_LPSS_H */ diff --git a/kernel/include/linux/platform_data/clk-realview.h b/kernel/include/linux/platform_data/clk-realview.h new file mode 100644 index 000000000..2e426a7db --- /dev/null +++ b/kernel/include/linux/platform_data/clk-realview.h @@ -0,0 +1 @@ +void realview_clk_init(void __iomem *sysbase, bool is_pb1176); diff --git a/kernel/include/linux/platform_data/clk-u300.h b/kernel/include/linux/platform_data/clk-u300.h new file mode 100644 index 000000000..8429e7391 --- /dev/null +++ b/kernel/include/linux/platform_data/clk-u300.h @@ -0,0 +1 @@ +void __init u300_clk_init(void __iomem *base); diff --git a/kernel/include/linux/platform_data/clk-ux500.h b/kernel/include/linux/platform_data/clk-ux500.h new file mode 100644 index 000000000..97baf831e --- /dev/null +++ b/kernel/include/linux/platform_data/clk-ux500.h @@ -0,0 +1,23 @@ +/* + * Clock definitions for ux500 platforms + * + * Copyright (C) 2012 ST-Ericsson SA + * Author: Ulf Hansson <ulf.hansson@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __CLK_UX500_H +#define __CLK_UX500_H + +void u8500_of_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, + u32 clkrst5_base, u32 clkrst6_base); + +void u8500_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, + u32 clkrst5_base, u32 clkrst6_base); +void u9540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, + u32 clkrst5_base, u32 clkrst6_base); +void u8540_clk_init(u32 clkrst1_base, u32 clkrst2_base, u32 clkrst3_base, + u32 clkrst5_base, u32 clkrst6_base); + +#endif /* __CLK_UX500_H */ diff --git a/kernel/include/linux/platform_data/coda.h b/kernel/include/linux/platform_data/coda.h new file mode 100644 index 000000000..6ad4410d9 --- /dev/null +++ b/kernel/include/linux/platform_data/coda.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2013 Philipp Zabel, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef PLATFORM_CODA_H +#define PLATFORM_CODA_H + +struct device; + +struct coda_platform_data { + struct device *iram_dev; +}; + +#endif diff --git a/kernel/include/linux/platform_data/cpuidle-exynos.h b/kernel/include/linux/platform_data/cpuidle-exynos.h new file mode 100644 index 000000000..bfa40e4c5 --- /dev/null +++ b/kernel/include/linux/platform_data/cpuidle-exynos.h @@ -0,0 +1,20 @@ +/* + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __CPUIDLE_EXYNOS_H +#define __CPUIDLE_EXYNOS_H + +struct cpuidle_exynos_data { + int (*cpu0_enter_aftr)(void); + int (*cpu1_powerdown)(void); + void (*pre_enter_aftr)(void); + void (*post_enter_aftr)(void); +}; + +#endif diff --git a/kernel/include/linux/platform_data/crypto-atmel.h b/kernel/include/linux/platform_data/crypto-atmel.h new file mode 100644 index 000000000..b46e0d906 --- /dev/null +++ b/kernel/include/linux/platform_data/crypto-atmel.h @@ -0,0 +1,22 @@ +#ifndef __LINUX_CRYPTO_ATMEL_H +#define __LINUX_CRYPTO_ATMEL_H + +#include <linux/platform_data/dma-atmel.h> + +/** + * struct crypto_dma_data - DMA data for AES/TDES/SHA + */ +struct crypto_dma_data { + struct at_dma_slave txdata; + struct at_dma_slave rxdata; +}; + +/** + * struct crypto_platform_data - board-specific AES/TDES/SHA configuration + * @dma_slave: DMA slave interface to use in data transfers. + */ +struct crypto_platform_data { + struct crypto_dma_data *dma_slave; +}; + +#endif /* __LINUX_CRYPTO_ATMEL_H */ diff --git a/kernel/include/linux/platform_data/crypto-ux500.h b/kernel/include/linux/platform_data/crypto-ux500.h new file mode 100644 index 000000000..94df96d9a --- /dev/null +++ b/kernel/include/linux/platform_data/crypto-ux500.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef _CRYPTO_UX500_H +#define _CRYPTO_UX500_H +#include <linux/dmaengine.h> +#include <linux/platform_data/dma-ste-dma40.h> + +struct hash_platform_data { + void *mem_to_engine; + bool (*dma_filter)(struct dma_chan *chan, void *filter_param); +}; + +struct cryp_platform_data { + struct stedma40_chan_cfg mem_to_engine; + struct stedma40_chan_cfg engine_to_mem; +}; + +#endif diff --git a/kernel/include/linux/platform_data/cyttsp4.h b/kernel/include/linux/platform_data/cyttsp4.h new file mode 100644 index 000000000..6eba54aff --- /dev/null +++ b/kernel/include/linux/platform_data/cyttsp4.h @@ -0,0 +1,76 @@ +/* + * Header file for: + * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers. + * For use with Cypress Txx3xx parts. + * Supported parts include: + * CY8CTST341 + * CY8CTMA340 + * + * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Contact Cypress Semiconductor at www.cypress.com (kev@cypress.com) + * + */ +#ifndef _CYTTSP4_H_ +#define _CYTTSP4_H_ + +#define CYTTSP4_MT_NAME "cyttsp4_mt" +#define CYTTSP4_I2C_NAME "cyttsp4_i2c_adapter" +#define CYTTSP4_SPI_NAME "cyttsp4_spi_adapter" + +#define CY_TOUCH_SETTINGS_MAX 32 + +struct touch_framework { + const uint16_t *abs; + uint8_t size; + uint8_t enable_vkeys; +} __packed; + +struct cyttsp4_mt_platform_data { + struct touch_framework *frmwrk; + unsigned short flags; + char const *inp_dev_name; +}; + +struct touch_settings { + const uint8_t *data; + uint32_t size; + uint8_t tag; +} __packed; + +struct cyttsp4_core_platform_data { + int irq_gpio; + int rst_gpio; + int level_irq_udelay; + int (*xres)(struct cyttsp4_core_platform_data *pdata, + struct device *dev); + int (*init)(struct cyttsp4_core_platform_data *pdata, + int on, struct device *dev); + int (*power)(struct cyttsp4_core_platform_data *pdata, + int on, struct device *dev, atomic_t *ignore_irq); + int (*irq_stat)(struct cyttsp4_core_platform_data *pdata, + struct device *dev); + struct touch_settings *sett[CY_TOUCH_SETTINGS_MAX]; +}; + +struct cyttsp4_platform_data { + struct cyttsp4_core_platform_data *core_pdata; + struct cyttsp4_mt_platform_data *mt_pdata; +}; + +#endif /* _CYTTSP4_H_ */ diff --git a/kernel/include/linux/platform_data/davinci_asp.h b/kernel/include/linux/platform_data/davinci_asp.h new file mode 100644 index 000000000..85ad68f92 --- /dev/null +++ b/kernel/include/linux/platform_data/davinci_asp.h @@ -0,0 +1,112 @@ +/* + * TI DaVinci Audio Serial Port support + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DAVINCI_ASP_H +#define __DAVINCI_ASP_H + +#include <linux/genalloc.h> + +struct davinci_mcasp_pdata { + u32 tx_dma_offset; + u32 rx_dma_offset; + int asp_chan_q; /* event queue number for ASP channel */ + int ram_chan_q; /* event queue number for RAM channel */ + /* + * Allowing this is more efficient and eliminates left and right swaps + * caused by underruns, but will swap the left and right channels + * when compared to previous behavior. + */ + unsigned enable_channel_combine:1; + unsigned sram_size_playback; + unsigned sram_size_capture; + struct gen_pool *sram_pool; + + /* + * If McBSP peripheral gets the clock from an external pin, + * there are three chooses, that are MCBSP_CLKX, MCBSP_CLKR + * and MCBSP_CLKS. + * Depending on different hardware connections it is possible + * to use this setting to change the behaviour of McBSP + * driver. + */ + int clk_input_pin; + + /* + * This flag works when both clock and FS are outputs for the cpu + * and makes clock more accurate (FS is not symmetrical and the + * clock is very fast. + * The clock becoming faster is named + * i2s continuous serial clock (I2S_SCK) and it is an externally + * visible bit clock. + * + * first line : WordSelect + * second line : ContinuousSerialClock + * third line: SerialData + * + * SYMMETRICAL APPROACH: + * _______________________ LEFT + * _| RIGHT |______________________| + * _ _ _ _ _ _ _ _ + * _| |_| |_ x16 _| |_| |_| |_| |_ x16 _| |_| |_ + * _ _ _ _ _ _ _ _ + * _/ \_/ \_ ... _/ \_/ \_/ \_/ \_ ... _/ \_/ \_ + * \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ + * + * ACCURATE CLOCK APPROACH: + * ______________ LEFT + * _| RIGHT |_______________________________| + * _ _ _ _ _ _ _ _ _ + * _| |_ x16 _| |_| |_ x16 _| |_| |_| |_| |_| |_| | + * _ _ _ _ dummy cycles + * _/ \_ ... _/ \_/ \_ ... _/ \__________________ + * \_/ \_/ \_/ \_/ + * + */ + bool i2s_accurate_sck; + + /* McASP specific fields */ + int tdm_slots; + u8 op_mode; + u8 num_serializer; + u8 *serial_dir; + u8 version; + u8 txnumevt; + u8 rxnumevt; + int tx_dma_channel; + int rx_dma_channel; +}; +/* TODO: Fix arch/arm/mach-davinci/ users and remove this define */ +#define snd_platform_data davinci_mcasp_pdata + +enum { + MCASP_VERSION_1 = 0, /* DM646x */ + MCASP_VERSION_2, /* DA8xx/OMAPL1x */ + MCASP_VERSION_3, /* TI81xx/AM33xx */ + MCASP_VERSION_4, /* DRA7xxx */ +}; + +enum mcbsp_clk_input_pin { + MCBSP_CLKR = 0, /* as in DM365 */ + MCBSP_CLKS, +}; + +#define INACTIVE_MODE 0 +#define TX_MODE 1 +#define RX_MODE 2 + +#define DAVINCI_MCASP_IIS_MODE 0 +#define DAVINCI_MCASP_DIT_MODE 1 + +#endif diff --git a/kernel/include/linux/platform_data/db8500_thermal.h b/kernel/include/linux/platform_data/db8500_thermal.h new file mode 100644 index 000000000..3bf60902e --- /dev/null +++ b/kernel/include/linux/platform_data/db8500_thermal.h @@ -0,0 +1,38 @@ +/* + * db8500_thermal.h - DB8500 Thermal Management Implementation + * + * Copyright (C) 2012 ST-Ericsson + * Copyright (C) 2012 Linaro Ltd. + * + * Author: Hongbo Zhang <hongbo.zhang@linaro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DB8500_THERMAL_H_ +#define _DB8500_THERMAL_H_ + +#include <linux/thermal.h> + +#define COOLING_DEV_MAX 8 + +struct db8500_trip_point { + unsigned long temp; + enum thermal_trip_type type; + char cdev_name[COOLING_DEV_MAX][THERMAL_NAME_LENGTH]; +}; + +struct db8500_thsens_platform_data { + struct db8500_trip_point trip_points[THERMAL_MAX_TRIPS]; + int num_trips; +}; + +#endif /* _DB8500_THERMAL_H_ */ diff --git a/kernel/include/linux/platform_data/dma-atmel.h b/kernel/include/linux/platform_data/dma-atmel.h new file mode 100644 index 000000000..e95f19c65 --- /dev/null +++ b/kernel/include/linux/platform_data/dma-atmel.h @@ -0,0 +1,65 @@ +/* + * Header file for the Atmel AHB DMA Controller driver + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef AT_HDMAC_H +#define AT_HDMAC_H + +#include <linux/dmaengine.h> + +/** + * struct at_dma_platform_data - Controller configuration parameters + * @nr_channels: Number of channels supported by hardware (max 8) + * @cap_mask: dma_capability flags supported by the platform + */ +struct at_dma_platform_data { + unsigned int nr_channels; + dma_cap_mask_t cap_mask; +}; + +/** + * struct at_dma_slave - Controller-specific information about a slave + * @dma_dev: required DMA master device + * @cfg: Platform-specific initializer for the CFG register + */ +struct at_dma_slave { + struct device *dma_dev; + u32 cfg; +}; + + +/* Platform-configurable bits in CFG */ +#define ATC_PER_MSB(h) ((0x30U & (h)) >> 4) /* Extract most significant bits of a handshaking identifier */ + +#define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */ +#define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */ +#define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */ +#define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */ +#define ATC_SRC_H2SEL_SW (0x0 << 9) +#define ATC_SRC_H2SEL_HW (0x1 << 9) +#define ATC_SRC_PER_MSB(h) (ATC_PER_MSB(h) << 10) /* Channel src rq (most significant bits) */ +#define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */ +#define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */ +#define ATC_DST_H2SEL_SW (0x0 << 13) +#define ATC_DST_H2SEL_HW (0x1 << 13) +#define ATC_DST_PER_MSB(h) (ATC_PER_MSB(h) << 14) /* Channel dst rq (most significant bits) */ +#define ATC_SOD (0x1 << 16) /* Stop On Done */ +#define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */ +#define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */ +#define ATC_LOCK_IF_L (0x1 << 22) /* Master Interface Arbiter Lock */ +#define ATC_LOCK_IF_L_CHUNK (0x0 << 22) +#define ATC_LOCK_IF_L_BUFFER (0x1 << 22) +#define ATC_AHB_PROT_MASK (0x7 << 24) /* AHB Protection */ +#define ATC_FIFOCFG_MASK (0x3 << 28) /* FIFO Request Configuration */ +#define ATC_FIFOCFG_LARGESTBURST (0x0 << 28) +#define ATC_FIFOCFG_HALFFIFO (0x1 << 28) +#define ATC_FIFOCFG_ENOUGHSPACE (0x2 << 28) + + +#endif /* AT_HDMAC_H */ diff --git a/kernel/include/linux/platform_data/dma-coh901318.h b/kernel/include/linux/platform_data/dma-coh901318.h new file mode 100644 index 000000000..c4cb9590d --- /dev/null +++ b/kernel/include/linux/platform_data/dma-coh901318.h @@ -0,0 +1,72 @@ +/* + * Platform data for the COH901318 DMA controller + * Copyright (C) 2007-2013 ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef PLAT_COH901318_H +#define PLAT_COH901318_H + +#ifdef CONFIG_COH901318 + +/* We only support the U300 DMA channels */ +#define U300_DMA_MSL_TX_0 0 +#define U300_DMA_MSL_TX_1 1 +#define U300_DMA_MSL_TX_2 2 +#define U300_DMA_MSL_TX_3 3 +#define U300_DMA_MSL_TX_4 4 +#define U300_DMA_MSL_TX_5 5 +#define U300_DMA_MSL_TX_6 6 +#define U300_DMA_MSL_RX_0 7 +#define U300_DMA_MSL_RX_1 8 +#define U300_DMA_MSL_RX_2 9 +#define U300_DMA_MSL_RX_3 10 +#define U300_DMA_MSL_RX_4 11 +#define U300_DMA_MSL_RX_5 12 +#define U300_DMA_MSL_RX_6 13 +#define U300_DMA_MMCSD_RX_TX 14 +#define U300_DMA_MSPRO_TX 15 +#define U300_DMA_MSPRO_RX 16 +#define U300_DMA_UART0_TX 17 +#define U300_DMA_UART0_RX 18 +#define U300_DMA_APEX_TX 19 +#define U300_DMA_APEX_RX 20 +#define U300_DMA_PCM_I2S0_TX 21 +#define U300_DMA_PCM_I2S0_RX 22 +#define U300_DMA_PCM_I2S1_TX 23 +#define U300_DMA_PCM_I2S1_RX 24 +#define U300_DMA_XGAM_CDI 25 +#define U300_DMA_XGAM_PDI 26 +#define U300_DMA_SPI_TX 27 +#define U300_DMA_SPI_RX 28 +#define U300_DMA_GENERAL_PURPOSE_0 29 +#define U300_DMA_GENERAL_PURPOSE_1 30 +#define U300_DMA_GENERAL_PURPOSE_2 31 +#define U300_DMA_GENERAL_PURPOSE_3 32 +#define U300_DMA_GENERAL_PURPOSE_4 33 +#define U300_DMA_GENERAL_PURPOSE_5 34 +#define U300_DMA_GENERAL_PURPOSE_6 35 +#define U300_DMA_GENERAL_PURPOSE_7 36 +#define U300_DMA_GENERAL_PURPOSE_8 37 +#define U300_DMA_UART1_TX 38 +#define U300_DMA_UART1_RX 39 + +#define U300_DMA_DEVICE_CHANNELS 32 +#define U300_DMA_CHANNELS 40 + +/** + * coh901318_filter_id() - DMA channel filter function + * @chan: dma channel handle + * @chan_id: id of dma channel to be filter out + * + * In dma_request_channel() it specifies what channel id to be requested + */ +bool coh901318_filter_id(struct dma_chan *chan, void *chan_id); +#else +static inline bool coh901318_filter_id(struct dma_chan *chan, void *chan_id) +{ + return false; +} +#endif + +#endif /* PLAT_COH901318_H */ diff --git a/kernel/include/linux/platform_data/dma-dw.h b/kernel/include/linux/platform_data/dma-dw.h new file mode 100644 index 000000000..87ac14c58 --- /dev/null +++ b/kernel/include/linux/platform_data/dma-dw.h @@ -0,0 +1,61 @@ +/* + * Driver for the Synopsys DesignWare DMA Controller + * + * Copyright (C) 2007 Atmel Corporation + * Copyright (C) 2010-2011 ST Microelectronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _PLATFORM_DATA_DMA_DW_H +#define _PLATFORM_DATA_DMA_DW_H + +#include <linux/device.h> + +#define DW_DMA_MAX_NR_MASTERS 4 + +/** + * struct dw_dma_slave - Controller-specific information about a slave + * + * @dma_dev: required DMA master device + * @src_id: src request line + * @dst_id: dst request line + * @src_master: src master for transfers on allocated channel. + * @dst_master: dest master for transfers on allocated channel. + */ +struct dw_dma_slave { + struct device *dma_dev; + u8 src_id; + u8 dst_id; + u8 src_master; + u8 dst_master; +}; + +/** + * struct dw_dma_platform_data - Controller configuration parameters + * @nr_channels: Number of channels supported by hardware (max 8) + * @is_private: The device channels should be marked as private and not for + * by the general purpose DMA channel allocator. + * @chan_allocation_order: Allocate channels starting from 0 or 7 + * @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0. + * @block_size: Maximum block size supported by the controller + * @nr_masters: Number of AHB masters supported by the controller + * @data_width: Maximum data width supported by hardware per AHB master + * (0 - 8bits, 1 - 16bits, ..., 5 - 256bits) + */ +struct dw_dma_platform_data { + unsigned int nr_channels; + bool is_private; +#define CHAN_ALLOCATION_ASCENDING 0 /* zero to seven */ +#define CHAN_ALLOCATION_DESCENDING 1 /* seven to zero */ + unsigned char chan_allocation_order; +#define CHAN_PRIORITY_ASCENDING 0 /* chan0 highest */ +#define CHAN_PRIORITY_DESCENDING 1 /* chan7 highest */ + unsigned char chan_priority; + unsigned short block_size; + unsigned char nr_masters; + unsigned char data_width[DW_DMA_MAX_NR_MASTERS]; +}; + +#endif /* _PLATFORM_DATA_DMA_DW_H */ diff --git a/kernel/include/linux/platform_data/dma-ep93xx.h b/kernel/include/linux/platform_data/dma-ep93xx.h new file mode 100644 index 000000000..e82c642fa --- /dev/null +++ b/kernel/include/linux/platform_data/dma-ep93xx.h @@ -0,0 +1,93 @@ +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H + +#include <linux/types.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> + +/* + * M2P channels. + * + * Note that these values are also directly used for setting the PPALLOC + * register. + */ +#define EP93XX_DMA_I2S1 0 +#define EP93XX_DMA_I2S2 1 +#define EP93XX_DMA_AAC1 2 +#define EP93XX_DMA_AAC2 3 +#define EP93XX_DMA_AAC3 4 +#define EP93XX_DMA_I2S3 5 +#define EP93XX_DMA_UART1 6 +#define EP93XX_DMA_UART2 7 +#define EP93XX_DMA_UART3 8 +#define EP93XX_DMA_IRDA 9 +/* M2M channels */ +#define EP93XX_DMA_SSP 10 +#define EP93XX_DMA_IDE 11 + +/** + * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine + * @port: peripheral which is requesting the channel + * @direction: TX/RX channel + * @name: optional name for the channel, this is displayed in /proc/interrupts + * + * This information is passed as private channel parameter in a filter + * function. Note that this is only needed for slave/cyclic channels. For + * memcpy channels %NULL data should be passed. + */ +struct ep93xx_dma_data { + int port; + enum dma_transfer_direction direction; + const char *name; +}; + +/** + * struct ep93xx_dma_chan_data - platform specific data for a DMA channel + * @name: name of the channel, used for getting the right clock for the channel + * @base: mapped registers + * @irq: interrupt number used by this channel + */ +struct ep93xx_dma_chan_data { + const char *name; + void __iomem *base; + int irq; +}; + +/** + * struct ep93xx_dma_platform_data - platform data for the dmaengine driver + * @channels: array of channels which are passed to the driver + * @num_channels: number of channels in the array + * + * This structure is passed to the DMA engine driver via platform data. For + * M2P channels, contract is that even channels are for TX and odd for RX. + * There is no requirement for the M2M channels. + */ +struct ep93xx_dma_platform_data { + struct ep93xx_dma_chan_data *channels; + size_t num_channels; +}; + +static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p"); +} + +/** + * ep93xx_dma_chan_direction - returns direction the channel can be used + * @chan: channel + * + * This function can be used in filter functions to find out whether the + * channel supports given DMA direction. Only M2P channels have such + * limitation, for M2M channels the direction is configurable. + */ +static inline enum dma_transfer_direction +ep93xx_dma_chan_direction(struct dma_chan *chan) +{ + if (!ep93xx_dma_chan_is_m2p(chan)) + return DMA_NONE; + + /* even channels are for TX, odd for RX */ + return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM; +} + +#endif /* __ASM_ARCH_DMA_H */ diff --git a/kernel/include/linux/platform_data/dma-hsu.h b/kernel/include/linux/platform_data/dma-hsu.h new file mode 100644 index 000000000..8a1f6a492 --- /dev/null +++ b/kernel/include/linux/platform_data/dma-hsu.h @@ -0,0 +1,25 @@ +/* + * Driver for the High Speed UART DMA + * + * Copyright (C) 2015 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _PLATFORM_DATA_DMA_HSU_H +#define _PLATFORM_DATA_DMA_HSU_H + +#include <linux/device.h> + +struct hsu_dma_slave { + struct device *dma_dev; + int chan_id; +}; + +struct hsu_dma_platform_data { + unsigned short nr_channels; +}; + +#endif /* _PLATFORM_DATA_DMA_HSU_H */ diff --git a/kernel/include/linux/platform_data/dma-imx-sdma.h b/kernel/include/linux/platform_data/dma-imx-sdma.h new file mode 100644 index 000000000..2d0881672 --- /dev/null +++ b/kernel/include/linux/platform_data/dma-imx-sdma.h @@ -0,0 +1,67 @@ +#ifndef __MACH_MXC_SDMA_H__ +#define __MACH_MXC_SDMA_H__ + +/** + * struct sdma_script_start_addrs - SDMA script start pointers + * + * start addresses of the different functions in the physical + * address space of the SDMA engine. + */ +struct sdma_script_start_addrs { + s32 ap_2_ap_addr; + s32 ap_2_bp_addr; + s32 ap_2_ap_fixed_addr; + s32 bp_2_ap_addr; + s32 loopback_on_dsp_side_addr; + s32 mcu_interrupt_only_addr; + s32 firi_2_per_addr; + s32 firi_2_mcu_addr; + s32 per_2_firi_addr; + s32 mcu_2_firi_addr; + s32 uart_2_per_addr; + s32 uart_2_mcu_addr; + s32 per_2_app_addr; + s32 mcu_2_app_addr; + s32 per_2_per_addr; + s32 uartsh_2_per_addr; + s32 uartsh_2_mcu_addr; + s32 per_2_shp_addr; + s32 mcu_2_shp_addr; + s32 ata_2_mcu_addr; + s32 mcu_2_ata_addr; + s32 app_2_per_addr; + s32 app_2_mcu_addr; + s32 shp_2_per_addr; + s32 shp_2_mcu_addr; + s32 mshc_2_mcu_addr; + s32 mcu_2_mshc_addr; + s32 spdif_2_mcu_addr; + s32 mcu_2_spdif_addr; + s32 asrc_2_mcu_addr; + s32 ext_mem_2_ipu_addr; + s32 descrambler_addr; + s32 dptc_dvfs_addr; + s32 utra_addr; + s32 ram_code_start_addr; + /* End of v1 array */ + s32 mcu_2_ssish_addr; + s32 ssish_2_mcu_addr; + s32 hdmi_dma_addr; + /* End of v2 array */ + s32 zcanfd_2_mcu_addr; + s32 zqspi_2_mcu_addr; + /* End of v3 array */ +}; + +/** + * struct sdma_platform_data - platform specific data for SDMA engine + * + * @fw_name The firmware name + * @script_addrs SDMA scripts addresses in SDMA ROM + */ +struct sdma_platform_data { + char *fw_name; + struct sdma_script_start_addrs *script_addrs; +}; + +#endif /* __MACH_MXC_SDMA_H__ */ diff --git a/kernel/include/linux/platform_data/dma-imx.h b/kernel/include/linux/platform_data/dma-imx.h new file mode 100644 index 000000000..7d964e787 --- /dev/null +++ b/kernel/include/linux/platform_data/dma-imx.h @@ -0,0 +1,71 @@ +/* + * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_DMA_H__ +#define __ASM_ARCH_MXC_DMA_H__ + +#include <linux/scatterlist.h> +#include <linux/device.h> +#include <linux/dmaengine.h> + +/* + * This enumerates peripheral types. Used for SDMA. + */ +enum sdma_peripheral_type { + IMX_DMATYPE_SSI, /* MCU domain SSI */ + IMX_DMATYPE_SSI_SP, /* Shared SSI */ + IMX_DMATYPE_MMC, /* MMC */ + IMX_DMATYPE_SDHC, /* SDHC */ + IMX_DMATYPE_UART, /* MCU domain UART */ + IMX_DMATYPE_UART_SP, /* Shared UART */ + IMX_DMATYPE_FIRI, /* FIRI */ + IMX_DMATYPE_CSPI, /* MCU domain CSPI */ + IMX_DMATYPE_CSPI_SP, /* Shared CSPI */ + IMX_DMATYPE_SIM, /* SIM */ + IMX_DMATYPE_ATA, /* ATA */ + IMX_DMATYPE_CCM, /* CCM */ + IMX_DMATYPE_EXT, /* External peripheral */ + IMX_DMATYPE_MSHC, /* Memory Stick Host Controller */ + IMX_DMATYPE_MSHC_SP, /* Shared Memory Stick Host Controller */ + IMX_DMATYPE_DSP, /* DSP */ + IMX_DMATYPE_MEMORY, /* Memory */ + IMX_DMATYPE_FIFO_MEMORY,/* FIFO type Memory */ + IMX_DMATYPE_SPDIF, /* SPDIF */ + IMX_DMATYPE_IPU_MEMORY, /* IPU Memory */ + IMX_DMATYPE_ASRC, /* ASRC */ + IMX_DMATYPE_ESAI, /* ESAI */ + IMX_DMATYPE_SSI_DUAL, /* SSI Dual FIFO */ + IMX_DMATYPE_ASRC_SP, /* Shared ASRC */ + IMX_DMATYPE_SAI, /* SAI */ +}; + +enum imx_dma_prio { + DMA_PRIO_HIGH = 0, + DMA_PRIO_MEDIUM = 1, + DMA_PRIO_LOW = 2 +}; + +struct imx_dma_data { + int dma_request; /* DMA request line */ + int dma_request2; /* secondary DMA request line */ + enum sdma_peripheral_type peripheral_type; + int priority; +}; + +static inline int imx_dma_is_ipu(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "ipu-core"); +} + +static inline int imx_dma_is_general_purpose(struct dma_chan *chan) +{ + return !strcmp(chan->device->dev->driver->name, "imx-sdma") || + !strcmp(chan->device->dev->driver->name, "imx-dma"); +} + +#endif diff --git a/kernel/include/linux/platform_data/dma-mmp_tdma.h b/kernel/include/linux/platform_data/dma-mmp_tdma.h new file mode 100644 index 000000000..0c7288603 --- /dev/null +++ b/kernel/include/linux/platform_data/dma-mmp_tdma.h @@ -0,0 +1,40 @@ +/* + * SRAM Memory Management + * + * Copyright (c) 2011 Marvell Semiconductors Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DMA_MMP_TDMA_H +#define __DMA_MMP_TDMA_H + +#include <linux/genalloc.h> + +/* ARBITRARY: SRAM allocations are multiples of this 2^N size */ +#define SRAM_GRANULARITY 512 + +enum sram_type { + MMP_SRAM_UNDEFINED = 0, + MMP_ASRAM, + MMP_ISRAM, +}; + +struct sram_platdata { + char *pool_name; + int granularity; +}; + +#ifdef CONFIG_ARM +extern struct gen_pool *sram_get_gpool(char *pool_name); +#else +static inline struct gen_pool *sram_get_gpool(char *pool_name) +{ + return NULL; +} +#endif + +#endif /* __DMA_MMP_TDMA_H */ diff --git a/kernel/include/linux/platform_data/dma-mv_xor.h b/kernel/include/linux/platform_data/dma-mv_xor.h new file mode 100644 index 000000000..92ffd3245 --- /dev/null +++ b/kernel/include/linux/platform_data/dma-mv_xor.h @@ -0,0 +1,21 @@ +/* + * Marvell XOR platform device data definition file. + */ + +#ifndef __DMA_MV_XOR_H +#define __DMA_MV_XOR_H + +#include <linux/dmaengine.h> +#include <linux/mbus.h> + +#define MV_XOR_NAME "mv_xor" + +struct mv_xor_channel_data { + dma_cap_mask_t cap_mask; +}; + +struct mv_xor_platform_data { + struct mv_xor_channel_data *channels; +}; + +#endif diff --git a/kernel/include/linux/platform_data/dma-rcar-audmapp.h b/kernel/include/linux/platform_data/dma-rcar-audmapp.h new file mode 100644 index 000000000..471fffebb --- /dev/null +++ b/kernel/include/linux/platform_data/dma-rcar-audmapp.h @@ -0,0 +1,34 @@ +/* + * This is for Renesas R-Car Audio-DMAC-peri-peri. + * + * Copyright (C) 2014 Renesas Electronics Corporation + * Copyright (C) 2014 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * This file is based on the include/linux/sh_dma.h + * + * Header for the new SH dmaengine driver + * + * Copyright (C) 2010 Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef SH_AUDMAPP_H +#define SH_AUDMAPP_H + +#include <linux/dmaengine.h> + +struct audmapp_slave_config { + int slave_id; + dma_addr_t src; + dma_addr_t dst; + u32 chcr; +}; + +struct audmapp_pdata { + struct audmapp_slave_config *slave; + int slave_num; +}; + +#endif /* SH_AUDMAPP_H */ diff --git a/kernel/include/linux/platform_data/dma-rcar-hpbdma.h b/kernel/include/linux/platform_data/dma-rcar-hpbdma.h new file mode 100644 index 000000000..648b8ea61 --- /dev/null +++ b/kernel/include/linux/platform_data/dma-rcar-hpbdma.h @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2011-2013 Renesas Electronics Corporation + * Copyright (C) 2013 Cogent Embedded, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + */ + +#ifndef __DMA_RCAR_HPBDMA_H +#define __DMA_RCAR_HPBDMA_H + +#include <linux/bitops.h> +#include <linux/types.h> + +/* Transmit sizes and respective register values */ +enum { + XMIT_SZ_8BIT = 0, + XMIT_SZ_16BIT = 1, + XMIT_SZ_32BIT = 2, + XMIT_SZ_MAX +}; + +/* DMA control register (DCR) bits */ +#define HPB_DMAE_DCR_DTAMD (1u << 26) +#define HPB_DMAE_DCR_DTAC (1u << 25) +#define HPB_DMAE_DCR_DTAU (1u << 24) +#define HPB_DMAE_DCR_DTAU1 (1u << 23) +#define HPB_DMAE_DCR_SWMD (1u << 22) +#define HPB_DMAE_DCR_BTMD (1u << 21) +#define HPB_DMAE_DCR_PKMD (1u << 20) +#define HPB_DMAE_DCR_CT (1u << 18) +#define HPB_DMAE_DCR_ACMD (1u << 17) +#define HPB_DMAE_DCR_DIP (1u << 16) +#define HPB_DMAE_DCR_SMDL (1u << 13) +#define HPB_DMAE_DCR_SPDAM (1u << 12) +#define HPB_DMAE_DCR_SDRMD_MASK (3u << 10) +#define HPB_DMAE_DCR_SDRMD_MOD (0u << 10) +#define HPB_DMAE_DCR_SDRMD_AUTO (1u << 10) +#define HPB_DMAE_DCR_SDRMD_TIMER (2u << 10) +#define HPB_DMAE_DCR_SPDS_MASK (3u << 8) +#define HPB_DMAE_DCR_SPDS_8BIT (0u << 8) +#define HPB_DMAE_DCR_SPDS_16BIT (1u << 8) +#define HPB_DMAE_DCR_SPDS_32BIT (2u << 8) +#define HPB_DMAE_DCR_DMDL (1u << 5) +#define HPB_DMAE_DCR_DPDAM (1u << 4) +#define HPB_DMAE_DCR_DDRMD_MASK (3u << 2) +#define HPB_DMAE_DCR_DDRMD_MOD (0u << 2) +#define HPB_DMAE_DCR_DDRMD_AUTO (1u << 2) +#define HPB_DMAE_DCR_DDRMD_TIMER (2u << 2) +#define HPB_DMAE_DCR_DPDS_MASK (3u << 0) +#define HPB_DMAE_DCR_DPDS_8BIT (0u << 0) +#define HPB_DMAE_DCR_DPDS_16BIT (1u << 0) +#define HPB_DMAE_DCR_DPDS_32BIT (2u << 0) + +/* Asynchronous reset register (ASYNCRSTR) bits */ +#define HPB_DMAE_ASYNCRSTR_ASRST41 BIT(10) +#define HPB_DMAE_ASYNCRSTR_ASRST40 BIT(9) +#define HPB_DMAE_ASYNCRSTR_ASRST39 BIT(8) +#define HPB_DMAE_ASYNCRSTR_ASRST27 BIT(7) +#define HPB_DMAE_ASYNCRSTR_ASRST26 BIT(6) +#define HPB_DMAE_ASYNCRSTR_ASRST25 BIT(5) +#define HPB_DMAE_ASYNCRSTR_ASRST24 BIT(4) +#define HPB_DMAE_ASYNCRSTR_ASRST23 BIT(3) +#define HPB_DMAE_ASYNCRSTR_ASRST22 BIT(2) +#define HPB_DMAE_ASYNCRSTR_ASRST21 BIT(1) +#define HPB_DMAE_ASYNCRSTR_ASRST20 BIT(0) + +struct hpb_dmae_slave_config { + unsigned int id; + dma_addr_t addr; + u32 dcr; + u32 port; + u32 rstr; + u32 mdr; + u32 mdm; + u32 flags; +#define HPB_DMAE_SET_ASYNC_RESET BIT(0) +#define HPB_DMAE_SET_ASYNC_MODE BIT(1) + u32 dma_ch; +}; + +#define HPB_DMAE_CHANNEL(_irq, _s_id) \ +{ \ + .ch_irq = _irq, \ + .s_id = _s_id, \ +} + +struct hpb_dmae_channel { + unsigned int ch_irq; + unsigned int s_id; +}; + +struct hpb_dmae_pdata { + const struct hpb_dmae_slave_config *slaves; + int num_slaves; + const struct hpb_dmae_channel *channels; + int num_channels; + const unsigned int ts_shift[XMIT_SZ_MAX]; + int num_hw_channels; +}; + +#endif diff --git a/kernel/include/linux/platform_data/dma-s3c24xx.h b/kernel/include/linux/platform_data/dma-s3c24xx.h new file mode 100644 index 000000000..89ba1b0c9 --- /dev/null +++ b/kernel/include/linux/platform_data/dma-s3c24xx.h @@ -0,0 +1,46 @@ +/* + * S3C24XX DMA handling + * + * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +/* Helper to encode the source selection constraints for early s3c socs. */ +#define S3C24XX_DMA_CHANREQ(src, chan) ((BIT(3) | src) << chan * 4) + +enum s3c24xx_dma_bus { + S3C24XX_DMA_APB, + S3C24XX_DMA_AHB, +}; + +/** + * @bus: on which bus does the peripheral reside - AHB or APB. + * @handshake: is a handshake with the peripheral necessary + * @chansel: channel selection information, depending on variant; reqsel for + * s3c2443 and later and channel-selection map for earlier SoCs + * see CHANSEL doc in s3c2443-dma.c + */ +struct s3c24xx_dma_channel { + enum s3c24xx_dma_bus bus; + bool handshake; + u16 chansel; +}; + +/** + * struct s3c24xx_dma_platdata - platform specific settings + * @num_phy_channels: number of physical channels + * @channels: array of virtual channel descriptions + * @num_channels: number of virtual channels + */ +struct s3c24xx_dma_platdata { + int num_phy_channels; + struct s3c24xx_dma_channel *channels; + int num_channels; +}; + +struct dma_chan; +bool s3c24xx_dma_filter(struct dma_chan *chan, void *param); diff --git a/kernel/include/linux/platform_data/dma-ste-dma40.h b/kernel/include/linux/platform_data/dma-ste-dma40.h new file mode 100644 index 000000000..1bb9b1852 --- /dev/null +++ b/kernel/include/linux/platform_data/dma-ste-dma40.h @@ -0,0 +1,209 @@ +/* + * Copyright (C) ST-Ericsson SA 2007-2010 + * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ + + +#ifndef STE_DMA40_H +#define STE_DMA40_H + +#include <linux/dmaengine.h> +#include <linux/scatterlist.h> +#include <linux/workqueue.h> +#include <linux/interrupt.h> + +/* + * Maxium size for a single dma descriptor + * Size is limited to 16 bits. + * Size is in the units of addr-widths (1,2,4,8 bytes) + * Larger transfers will be split up to multiple linked desc + */ +#define STEDMA40_MAX_SEG_SIZE 0xFFFF + +/* dev types for memcpy */ +#define STEDMA40_DEV_DST_MEMORY (-1) +#define STEDMA40_DEV_SRC_MEMORY (-1) + +enum stedma40_mode { + STEDMA40_MODE_LOGICAL = 0, + STEDMA40_MODE_PHYSICAL, + STEDMA40_MODE_OPERATION, +}; + +enum stedma40_mode_opt { + STEDMA40_PCHAN_BASIC_MODE = 0, + STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0, + STEDMA40_PCHAN_MODULO_MODE, + STEDMA40_PCHAN_DOUBLE_DST_MODE, + STEDMA40_LCHAN_SRC_PHY_DST_LOG, + STEDMA40_LCHAN_SRC_LOG_DST_PHY, +}; + +#define STEDMA40_ESIZE_8_BIT 0x0 +#define STEDMA40_ESIZE_16_BIT 0x1 +#define STEDMA40_ESIZE_32_BIT 0x2 +#define STEDMA40_ESIZE_64_BIT 0x3 + +/* The value 4 indicates that PEN-reg shall be set to 0 */ +#define STEDMA40_PSIZE_PHY_1 0x4 +#define STEDMA40_PSIZE_PHY_2 0x0 +#define STEDMA40_PSIZE_PHY_4 0x1 +#define STEDMA40_PSIZE_PHY_8 0x2 +#define STEDMA40_PSIZE_PHY_16 0x3 + +/* + * The number of elements differ in logical and + * physical mode + */ +#define STEDMA40_PSIZE_LOG_1 STEDMA40_PSIZE_PHY_2 +#define STEDMA40_PSIZE_LOG_4 STEDMA40_PSIZE_PHY_4 +#define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8 +#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16 + +/* Maximum number of possible physical channels */ +#define STEDMA40_MAX_PHYS 32 + +enum stedma40_flow_ctrl { + STEDMA40_NO_FLOW_CTRL, + STEDMA40_FLOW_CTRL, +}; + +/** + * struct stedma40_half_channel_info - dst/src channel configuration + * + * @big_endian: true if the src/dst should be read as big endian + * @data_width: Data width of the src/dst hardware + * @p_size: Burst size + * @flow_ctrl: Flow control on/off. + */ +struct stedma40_half_channel_info { + bool big_endian; + enum dma_slave_buswidth data_width; + int psize; + enum stedma40_flow_ctrl flow_ctrl; +}; + +/** + * struct stedma40_chan_cfg - Structure to be filled by client drivers. + * + * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH + * @high_priority: true if high-priority + * @realtime: true if realtime mode is to be enabled. Only available on DMA40 + * version 3+, i.e DB8500v2+ + * @mode: channel mode: physical, logical, or operation + * @mode_opt: options for the chosen channel mode + * @dev_type: src/dst device type (driver uses dir to figure out which) + * @src_info: Parameters for dst half channel + * @dst_info: Parameters for dst half channel + * @use_fixed_channel: if true, use physical channel specified by phy_channel + * @phy_channel: physical channel to use, only if use_fixed_channel is true + * + * This structure has to be filled by the client drivers. + * It is recommended to do all dma configurations for clients in the machine. + * + */ +struct stedma40_chan_cfg { + enum dma_transfer_direction dir; + bool high_priority; + bool realtime; + enum stedma40_mode mode; + enum stedma40_mode_opt mode_opt; + int dev_type; + struct stedma40_half_channel_info src_info; + struct stedma40_half_channel_info dst_info; + + bool use_fixed_channel; + int phy_channel; +}; + +/** + * struct stedma40_platform_data - Configuration struct for the dma device. + * + * @dev_tx: mapping between destination event line and io address + * @dev_rx: mapping between source event line and io address + * @disabled_channels: A vector, ending with -1, that marks physical channels + * that are for different reasons not available for the driver. + * @soft_lli_chans: A vector, that marks physical channels will use LLI by SW + * which avoids HW bug that exists in some versions of the controller. + * SoftLLI introduces relink overhead that could impact performace for + * certain use cases. + * @num_of_soft_lli_chans: The number of channels that needs to be configured + * to use SoftLLI. + * @use_esram_lcla: flag for mapping the lcla into esram region + * @num_of_memcpy_chans: The number of channels reserved for memcpy. + * @num_of_phy_chans: The number of physical channels implemented in HW. + * 0 means reading the number of channels from DMA HW but this is only valid + * for 'multiple of 4' channels, like 8. + */ +struct stedma40_platform_data { + int disabled_channels[STEDMA40_MAX_PHYS]; + int *soft_lli_chans; + int num_of_soft_lli_chans; + bool use_esram_lcla; + int num_of_memcpy_chans; + int num_of_phy_chans; +}; + +#ifdef CONFIG_STE_DMA40 + +/** + * stedma40_filter() - Provides stedma40_chan_cfg to the + * ste_dma40 dma driver via the dmaengine framework. + * does some checking of what's provided. + * + * Never directly called by client. It used by dmaengine. + * @chan: dmaengine handle. + * @data: Must be of type: struct stedma40_chan_cfg and is + * the configuration of the framework. + * + * + */ + +bool stedma40_filter(struct dma_chan *chan, void *data); + +/** + * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave + * (=device) + * + * @chan: dmaengine handle + * @addr: source or destination physicall address. + * @size: bytes to transfer + * @direction: direction of transfer + * @flags: is actually enum dma_ctrl_flags. See dmaengine.h + */ + +static inline struct +dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, + dma_addr_t addr, + unsigned int size, + enum dma_transfer_direction direction, + unsigned long flags) +{ + struct scatterlist sg; + sg_init_table(&sg, 1); + sg.dma_address = addr; + sg.length = size; + + return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags); +} + +#else +static inline bool stedma40_filter(struct dma_chan *chan, void *data) +{ + return false; +} + +static inline struct +dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, + dma_addr_t addr, + unsigned int size, + enum dma_transfer_direction direction, + unsigned long flags) +{ + return NULL; +} +#endif + +#endif diff --git a/kernel/include/linux/platform_data/dmtimer-omap.h b/kernel/include/linux/platform_data/dmtimer-omap.h new file mode 100644 index 000000000..a19b78d82 --- /dev/null +++ b/kernel/include/linux/platform_data/dmtimer-omap.h @@ -0,0 +1,31 @@ +/* + * DMTIMER platform data for TI OMAP platforms + * + * Copyright (C) 2012 Texas Instruments + * Author: Jon Hunter <jon-hunter@ti.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __PLATFORM_DATA_DMTIMER_OMAP_H__ +#define __PLATFORM_DATA_DMTIMER_OMAP_H__ + +struct dmtimer_platform_data { + /* set_timer_src - Only used for OMAP1 devices */ + int (*set_timer_src)(struct platform_device *pdev, int source); + u32 timer_capability; + u32 timer_errata; + int (*get_context_loss_count)(struct device *); +}; + +#endif /* __PLATFORM_DATA_DMTIMER_OMAP_H__ */ diff --git a/kernel/include/linux/platform_data/drv260x-pdata.h b/kernel/include/linux/platform_data/drv260x-pdata.h new file mode 100644 index 000000000..0a03b0944 --- /dev/null +++ b/kernel/include/linux/platform_data/drv260x-pdata.h @@ -0,0 +1,28 @@ +/* + * Platform data for DRV260X haptics driver family + * + * Author: Dan Murphy <dmurphy@ti.com> + * + * Copyright: (C) 2014 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef _LINUX_DRV260X_PDATA_H +#define _LINUX_DRV260X_PDATA_H + +struct drv260x_platform_data { + u32 library_selection; + u32 mode; + u32 vib_rated_voltage; + u32 vib_overdrive_voltage; +}; + +#endif diff --git a/kernel/include/linux/platform_data/dwc3-omap.h b/kernel/include/linux/platform_data/dwc3-omap.h new file mode 100644 index 000000000..1d36ca874 --- /dev/null +++ b/kernel/include/linux/platform_data/dwc3-omap.h @@ -0,0 +1,43 @@ +/** + * dwc3-omap.h - OMAP Specific Glue layer, header. + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Author: Felipe Balbi <balbi@ti.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +enum dwc3_omap_utmi_mode { + DWC3_OMAP_UTMI_MODE_UNKNOWN = 0, + DWC3_OMAP_UTMI_MODE_HW, + DWC3_OMAP_UTMI_MODE_SW, +}; diff --git a/kernel/include/linux/platform_data/edma.h b/kernel/include/linux/platform_data/edma.h new file mode 100644 index 000000000..bdb2710e2 --- /dev/null +++ b/kernel/include/linux/platform_data/edma.h @@ -0,0 +1,179 @@ +/* + * TI EDMA definitions + * + * Copyright (C) 2006-2013 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/* + * This EDMA3 programming framework exposes two basic kinds of resource: + * + * Channel Triggers transfers, usually from a hardware event but + * also manually or by "chaining" from DMA completions. + * Each channel is coupled to a Parameter RAM (PaRAM) slot. + * + * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM + * "set"), source and destination addresses, a link to a + * next PaRAM slot (if any), options for the transfer, and + * instructions for updating those addresses. There are + * more than twice as many slots as event channels. + * + * Each PaRAM set describes a sequence of transfers, either for one large + * buffer or for several discontiguous smaller buffers. An EDMA transfer + * is driven only from a channel, which performs the transfers specified + * in its PaRAM slot until there are no more transfers. When that last + * transfer completes, the "link" field may be used to reload the channel's + * PaRAM slot with a new transfer descriptor. + * + * The EDMA Channel Controller (CC) maps requests from channels into physical + * Transfer Controller (TC) requests when the channel triggers (by hardware + * or software events, or by chaining). The two physical DMA channels provided + * by the TCs are thus shared by many logical channels. + * + * DaVinci hardware also has a "QDMA" mechanism which is not currently + * supported through this interface. (DSP firmware uses it though.) + */ + +#ifndef EDMA_H_ +#define EDMA_H_ + +/* PaRAM slots are laid out like this */ +struct edmacc_param { + u32 opt; + u32 src; + u32 a_b_cnt; + u32 dst; + u32 src_dst_bidx; + u32 link_bcntrld; + u32 src_dst_cidx; + u32 ccnt; +} __packed; + +/* fields in edmacc_param.opt */ +#define SAM BIT(0) +#define DAM BIT(1) +#define SYNCDIM BIT(2) +#define STATIC BIT(3) +#define EDMA_FWID (0x07 << 8) +#define TCCMODE BIT(11) +#define EDMA_TCC(t) ((t) << 12) +#define TCINTEN BIT(20) +#define ITCINTEN BIT(21) +#define TCCHEN BIT(22) +#define ITCCHEN BIT(23) + +/*ch_status paramater of callback function possible values*/ +#define EDMA_DMA_COMPLETE 1 +#define EDMA_DMA_CC_ERROR 2 +#define EDMA_DMA_TC1_ERROR 3 +#define EDMA_DMA_TC2_ERROR 4 + +enum address_mode { + INCR = 0, + FIFO = 1 +}; + +enum fifo_width { + W8BIT = 0, + W16BIT = 1, + W32BIT = 2, + W64BIT = 3, + W128BIT = 4, + W256BIT = 5 +}; + +enum dma_event_q { + EVENTQ_0 = 0, + EVENTQ_1 = 1, + EVENTQ_2 = 2, + EVENTQ_3 = 3, + EVENTQ_DEFAULT = -1 +}; + +enum sync_dimension { + ASYNC = 0, + ABSYNC = 1 +}; + +#define EDMA_CTLR_CHAN(ctlr, chan) (((ctlr) << 16) | (chan)) +#define EDMA_CTLR(i) ((i) >> 16) +#define EDMA_CHAN_SLOT(i) ((i) & 0xffff) + +#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */ +#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */ +#define EDMA_CONT_PARAMS_ANY 1001 +#define EDMA_CONT_PARAMS_FIXED_EXACT 1002 +#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003 + +#define EDMA_MAX_CC 2 + +/* alloc/free DMA channels and their dedicated parameter RAM slots */ +int edma_alloc_channel(int channel, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data, enum dma_event_q); +void edma_free_channel(unsigned channel); + +/* alloc/free parameter RAM slots */ +int edma_alloc_slot(unsigned ctlr, int slot); +void edma_free_slot(unsigned slot); + +/* alloc/free a set of contiguous parameter RAM slots */ +int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count); +int edma_free_cont_slots(unsigned slot, int count); + +/* calls that operate on part of a parameter RAM slot */ +void edma_set_src(unsigned slot, dma_addr_t src_port, + enum address_mode mode, enum fifo_width); +void edma_set_dest(unsigned slot, dma_addr_t dest_port, + enum address_mode mode, enum fifo_width); +dma_addr_t edma_get_position(unsigned slot, bool dst); +void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx); +void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx); +void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt, + u16 bcnt_rld, enum sync_dimension sync_mode); +void edma_link(unsigned from, unsigned to); +void edma_unlink(unsigned from); + +/* calls that operate on an entire parameter RAM slot */ +void edma_write_slot(unsigned slot, const struct edmacc_param *params); +void edma_read_slot(unsigned slot, struct edmacc_param *params); + +/* channel control operations */ +int edma_start(unsigned channel); +void edma_stop(unsigned channel); +void edma_clean_channel(unsigned channel); +void edma_clear_event(unsigned channel); +void edma_pause(unsigned channel); +void edma_resume(unsigned channel); + +void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no); + +struct edma_rsv_info { + + const s16 (*rsv_chans)[2]; + const s16 (*rsv_slots)[2]; +}; + +/* platform_data for EDMA driver */ +struct edma_soc_info { + /* + * Default queue is expected to be a low-priority queue. + * This way, long transfers on the default queue started + * by the codec engine will not cause audio defects. + */ + enum dma_event_q default_queue; + + /* Resource reservation for other cores */ + struct edma_rsv_info *rsv; + + s8 (*queue_priority_mapping)[2]; + const s16 (*xbar_chans)[2]; +}; + +int edma_trigger_channel(unsigned); + +#endif diff --git a/kernel/include/linux/platform_data/efm32-spi.h b/kernel/include/linux/platform_data/efm32-spi.h new file mode 100644 index 000000000..31b19ca1d --- /dev/null +++ b/kernel/include/linux/platform_data/efm32-spi.h @@ -0,0 +1,14 @@ +#ifndef __LINUX_PLATFORM_DATA_EFM32_SPI_H__ +#define __LINUX_PLATFORM_DATA_EFM32_SPI_H__ + +#include <linux/types.h> + +/** + * struct efm32_spi_pdata + * @location: pinmux location for the I/O pins (to be written to the ROUTE + * register) + */ +struct efm32_spi_pdata { + u8 location; +}; +#endif /* ifndef __LINUX_PLATFORM_DATA_EFM32_SPI_H__ */ diff --git a/kernel/include/linux/platform_data/efm32-uart.h b/kernel/include/linux/platform_data/efm32-uart.h new file mode 100644 index 000000000..ed0e975b3 --- /dev/null +++ b/kernel/include/linux/platform_data/efm32-uart.h @@ -0,0 +1,18 @@ +/* + * + * + */ +#ifndef __LINUX_PLATFORM_DATA_EFM32_UART_H__ +#define __LINUX_PLATFORM_DATA_EFM32_UART_H__ + +#include <linux/types.h> + +/** + * struct efm32_uart_pdata + * @location: pinmux location for the I/O pins (to be written to the ROUTE + * register) + */ +struct efm32_uart_pdata { + u8 location; +}; +#endif /* ifndef __LINUX_PLATFORM_DATA_EFM32_UART_H__ */ diff --git a/kernel/include/linux/platform_data/ehci-sh.h b/kernel/include/linux/platform_data/ehci-sh.h new file mode 100644 index 000000000..5c15a738e --- /dev/null +++ b/kernel/include/linux/platform_data/ehci-sh.h @@ -0,0 +1,28 @@ +/* + * EHCI SuperH driver platform data + * + * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __USB_EHCI_SH_H +#define __USB_EHCI_SH_H + +struct ehci_sh_platdata { + void (*phy_init)(void); /* Phy init function */ +}; + +#endif /* __USB_EHCI_SH_H */ diff --git a/kernel/include/linux/platform_data/elm.h b/kernel/include/linux/platform_data/elm.h new file mode 100644 index 000000000..b8686c00f --- /dev/null +++ b/kernel/include/linux/platform_data/elm.h @@ -0,0 +1,65 @@ +/* + * BCH Error Location Module + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ELM_H +#define __ELM_H + +enum bch_ecc { + BCH4_ECC = 0, + BCH8_ECC, + BCH16_ECC, +}; + +/* ELM support 8 error syndrome process */ +#define ERROR_VECTOR_MAX 8 + +/** + * struct elm_errorvec - error vector for elm + * @error_reported: set true for vectors error is reported + * @error_uncorrectable: number of uncorrectable errors + * @error_count: number of correctable errors in the sector + * @error_loc: buffer for error location + * + */ +struct elm_errorvec { + bool error_reported; + bool error_uncorrectable; + int error_count; + int error_loc[16]; +}; + +#if IS_ENABLED(CONFIG_MTD_NAND_OMAP_BCH) +void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc, + struct elm_errorvec *err_vec); +int elm_config(struct device *dev, enum bch_ecc bch_type, + int ecc_steps, int ecc_step_size, int ecc_syndrome_size); +#else +static inline void +elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc, + struct elm_errorvec *err_vec) +{ +} + +static inline int elm_config(struct device *dev, enum bch_ecc bch_type, + int ecc_steps, int ecc_step_size, + int ecc_syndrome_size) +{ + return -ENOSYS; +} +#endif /* CONFIG_MTD_NAND_ECC_BCH */ + +#endif /* __ELM_H */ diff --git a/kernel/include/linux/platform_data/emif_plat.h b/kernel/include/linux/platform_data/emif_plat.h new file mode 100644 index 000000000..5c19a2a64 --- /dev/null +++ b/kernel/include/linux/platform_data/emif_plat.h @@ -0,0 +1,129 @@ +/* + * Definitions for TI EMIF device platform data + * + * Copyright (C) 2012 Texas Instruments, Inc. + * + * Aneesh V <aneesh@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __EMIF_PLAT_H +#define __EMIF_PLAT_H + +/* Low power modes - EMIF_PWR_MGMT_CTRL */ +#define EMIF_LP_MODE_DISABLE 0 +#define EMIF_LP_MODE_CLOCK_STOP 1 +#define EMIF_LP_MODE_SELF_REFRESH 2 +#define EMIF_LP_MODE_PWR_DN 4 + +/* Hardware capabilities */ +#define EMIF_HW_CAPS_LL_INTERFACE 0x00000001 + +/* + * EMIF IP Revisions + * EMIF4D - Used in OMAP4 + * EMIF4D5 - Used in OMAP5 + */ +#define EMIF_4D 1 +#define EMIF_4D5 2 + +/* + * PHY types + * ATTILAPHY - Used in OMAP4 + * INTELLIPHY - Used in OMAP5 + */ +#define EMIF_PHY_TYPE_ATTILAPHY 1 +#define EMIF_PHY_TYPE_INTELLIPHY 2 + +/* Custom config requests */ +#define EMIF_CUSTOM_CONFIG_LPMODE 0x00000001 +#define EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL 0x00000002 +#define EMIF_CUSTOM_CONFIG_EXTENDED_TEMP_PART 0x00000004 + +#ifndef __ASSEMBLY__ +/** + * struct ddr_device_info - All information about the DDR device except AC + * timing parameters + * @type: Device type (LPDDR2-S4, LPDDR2-S2 etc) + * @density: Device density + * @io_width: Bus width + * @cs1_used: Whether there is a DDR device attached to the second + * chip-select(CS1) of this EMIF instance + * @cal_resistors_per_cs: Whether there is one calibration resistor per + * chip-select or whether it's a single one for both + * @manufacturer: Manufacturer name string + */ +struct ddr_device_info { + u32 type; + u32 density; + u32 io_width; + u32 cs1_used; + u32 cal_resistors_per_cs; + char manufacturer[10]; +}; + +/** + * struct emif_custom_configs - Custom configuration parameters/policies + * passed from the platform layer + * @mask: Mask to indicate which configs are requested + * @lpmode: LPMODE to be used in PWR_MGMT_CTRL register + * @lpmode_timeout_performance: Timeout before LPMODE entry when higher + * performance is desired at the cost of power (typically + * at higher OPPs) + * @lpmode_timeout_power: Timeout before LPMODE entry when better power + * savings is desired and performance is not important + * (typically at lower loads indicated by lower OPPs) + * @lpmode_freq_threshold: The DDR frequency threshold to identify between + * the above two cases: + * timeout = (freq >= lpmode_freq_threshold) ? + * lpmode_timeout_performance : + * lpmode_timeout_power; + * @temp_alert_poll_interval_ms: LPDDR2 MR4 polling interval at nominal + * temperature(in milliseconds). When temperature is high + * polling is done 4 times as frequently. + */ +struct emif_custom_configs { + u32 mask; + u32 lpmode; + u32 lpmode_timeout_performance; + u32 lpmode_timeout_power; + u32 lpmode_freq_threshold; + u32 temp_alert_poll_interval_ms; +}; + +/** + * struct emif_platform_data - Platform data passed on EMIF platform + * device creation. Used by the driver. + * @hw_caps: Hw capabilities of the EMIF IP in the respective SoC + * @device_info: Device info structure containing information such + * as type, bus width, density etc + * @timings: Timings information from device datasheet passed + * as an array of 'struct lpddr2_timings'. Can be NULL + * if if default timings are ok + * @timings_arr_size: Size of the timings array. Depends on the number + * of different frequencies for which timings data + * is provided + * @min_tck: Minimum value of some timing parameters in terms + * of number of cycles. Can be NULL if default values + * are ok + * @custom_configs: Custom configurations requested by SoC or board + * code and the data for them. Can be NULL if default + * configurations done by the driver are ok. See + * documentation for 'struct emif_custom_configs' for + * more details + */ +struct emif_platform_data { + u32 hw_caps; + struct ddr_device_info *device_info; + const struct lpddr2_timings *timings; + u32 timings_arr_size; + const struct lpddr2_min_tck *min_tck; + struct emif_custom_configs *custom_configs; + u32 ip_rev; + u32 phy_type; +}; +#endif /* __ASSEMBLY__ */ + +#endif /* __LINUX_EMIF_H */ diff --git a/kernel/include/linux/platform_data/eth-netx.h b/kernel/include/linux/platform_data/eth-netx.h new file mode 100644 index 000000000..a39515972 --- /dev/null +++ b/kernel/include/linux/platform_data/eth-netx.h @@ -0,0 +1,25 @@ +/* + * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ETH_NETX_H +#define __ETH_NETX_H + +struct netxeth_platform_data { + unsigned int xcno; /* number of xmac/xpec engine this eth uses */ +}; + +#endif diff --git a/kernel/include/linux/platform_data/fsa9480.h b/kernel/include/linux/platform_data/fsa9480.h new file mode 100644 index 000000000..72dddcb4b --- /dev/null +++ b/kernel/include/linux/platform_data/fsa9480.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2010 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _FSA9480_H_ +#define _FSA9480_H_ + +#define FSA9480_ATTACHED 1 +#define FSA9480_DETACHED 0 + +struct fsa9480_platform_data { + void (*cfg_gpio) (void); + void (*usb_cb) (u8 attached); + void (*uart_cb) (u8 attached); + void (*charger_cb) (u8 attached); + void (*jig_cb) (u8 attached); + void (*reset_cb) (void); + void (*usb_power) (u8 on); + int wakeup; +}; + +#endif /* _FSA9480_H_ */ diff --git a/kernel/include/linux/platform_data/g762.h b/kernel/include/linux/platform_data/g762.h new file mode 100644 index 000000000..d3c512837 --- /dev/null +++ b/kernel/include/linux/platform_data/g762.h @@ -0,0 +1,37 @@ +/* + * Platform data structure for g762 fan controller driver + * + * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __LINUX_PLATFORM_DATA_G762_H__ +#define __LINUX_PLATFORM_DATA_G762_H__ + +/* + * Following structure can be used to set g762 driver platform specific data + * during board init. Note that passing a sparse structure is possible but + * will result in non-specified attributes to be set to default value, hence + * overloading those installed during boot (e.g. by u-boot). + */ + +struct g762_platform_data { + u32 fan_startv; + u32 fan_gear_mode; + u32 pwm_polarity; + u32 clk_freq; +}; + +#endif /* __LINUX_PLATFORM_DATA_G762_H__ */ diff --git a/kernel/include/linux/platform_data/gpio-davinci.h b/kernel/include/linux/platform_data/gpio-davinci.h new file mode 100644 index 000000000..6ace3fd32 --- /dev/null +++ b/kernel/include/linux/platform_data/gpio-davinci.h @@ -0,0 +1,55 @@ +/* + * DaVinci GPIO Platform Related Defines + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DAVINCI_GPIO_PLATFORM_H +#define __DAVINCI_GPIO_PLATFORM_H + +#include <linux/io.h> +#include <linux/spinlock.h> + +#include <asm-generic/gpio.h> + +struct davinci_gpio_platform_data { + u32 ngpio; + u32 gpio_unbanked; +}; + + +struct davinci_gpio_controller { + struct gpio_chip chip; + struct irq_domain *irq_domain; + /* Serialize access to GPIO registers */ + spinlock_t lock; + void __iomem *regs; + void __iomem *set_data; + void __iomem *clr_data; + void __iomem *in_data; + int gpio_unbanked; + unsigned gpio_irq; +}; + +/* + * basic gpio routines + */ +#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ + +/* Convert GPIO signal to GPIO pin number */ +#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio)) + +static inline u32 __gpio_mask(unsigned gpio) +{ + return 1 << (gpio % 32); +} +#endif diff --git a/kernel/include/linux/platform_data/gpio-dwapb.h b/kernel/include/linux/platform_data/gpio-dwapb.h new file mode 100644 index 000000000..28702c849 --- /dev/null +++ b/kernel/include/linux/platform_data/gpio-dwapb.h @@ -0,0 +1,32 @@ +/* + * Copyright(c) 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef GPIO_DW_APB_H +#define GPIO_DW_APB_H + +struct dwapb_port_property { + struct device_node *node; + const char *name; + unsigned int idx; + unsigned int ngpio; + unsigned int gpio_base; + unsigned int irq; + bool irq_shared; +}; + +struct dwapb_platform_data { + struct dwapb_port_property *properties; + unsigned int nports; +}; + +#endif diff --git a/kernel/include/linux/platform_data/gpio-em.h b/kernel/include/linux/platform_data/gpio-em.h new file mode 100644 index 000000000..7c5a519d2 --- /dev/null +++ b/kernel/include/linux/platform_data/gpio-em.h @@ -0,0 +1,11 @@ +#ifndef __GPIO_EM_H__ +#define __GPIO_EM_H__ + +struct gpio_em_config { + unsigned int gpio_base; + unsigned int irq_base; + unsigned int number_of_pins; + const char *pctl_name; +}; + +#endif /* __GPIO_EM_H__ */ diff --git a/kernel/include/linux/platform_data/gpio-lpc32xx.h b/kernel/include/linux/platform_data/gpio-lpc32xx.h new file mode 100644 index 000000000..a544e962a --- /dev/null +++ b/kernel/include/linux/platform_data/gpio-lpc32xx.h @@ -0,0 +1,50 @@ +/* + * Author: Kevin Wells <kevin.wells@nxp.com> + * + * Copyright (C) 2010 NXP Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_GPIO_LPC32XX_H +#define __MACH_GPIO_LPC32XX_H + +/* + * Note! + * Muxed GP pins need to be setup to the GP state in the board level + * code prior to using this driver. + * GPI pins : 28xP3 group + * GPO pins : 24xP3 group + * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group + */ + +#define LPC32XX_GPIO_P0_MAX 8 +#define LPC32XX_GPIO_P1_MAX 24 +#define LPC32XX_GPIO_P2_MAX 13 +#define LPC32XX_GPIO_P3_MAX 6 +#define LPC32XX_GPI_P3_MAX 29 +#define LPC32XX_GPO_P3_MAX 24 + +#define LPC32XX_GPIO_P0_GRP 0 +#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX) +#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX) +#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX) +#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX) +#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX) + +/* + * A specific GPIO can be selected with this macro + * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5) + * See the LPC32x0 User's guide for GPIO group numbers + */ +#define LPC32XX_GPIO(x, y) ((x) + (y)) + +#endif /* __MACH_GPIO_LPC32XX_H */ diff --git a/kernel/include/linux/platform_data/gpio-omap.h b/kernel/include/linux/platform_data/gpio-omap.h new file mode 100644 index 000000000..5d50b25a7 --- /dev/null +++ b/kernel/include/linux/platform_data/gpio-omap.h @@ -0,0 +1,216 @@ +/* + * OMAP GPIO handling defines and functions + * + * Copyright (C) 2003-2005 Nokia Corporation + * + * Written by Juha Yrjölä <juha.yrjola@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_OMAP_GPIO_H +#define __ASM_ARCH_OMAP_GPIO_H + +#include <linux/io.h> +#include <linux/platform_device.h> + +#define OMAP1_MPUIO_BASE 0xfffb5000 + +/* + * These are the omap15xx/16xx offsets. The omap7xx offset are + * OMAP_MPUIO_ / 2 offsets below. + */ +#define OMAP_MPUIO_INPUT_LATCH 0x00 +#define OMAP_MPUIO_OUTPUT 0x04 +#define OMAP_MPUIO_IO_CNTL 0x08 +#define OMAP_MPUIO_KBR_LATCH 0x10 +#define OMAP_MPUIO_KBC 0x14 +#define OMAP_MPUIO_GPIO_EVENT_MODE 0x18 +#define OMAP_MPUIO_GPIO_INT_EDGE 0x1c +#define OMAP_MPUIO_KBD_INT 0x20 +#define OMAP_MPUIO_GPIO_INT 0x24 +#define OMAP_MPUIO_KBD_MASKIT 0x28 +#define OMAP_MPUIO_GPIO_MASKIT 0x2c +#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30 +#define OMAP_MPUIO_LATCH 0x34 + +#define OMAP34XX_NR_GPIOS 6 + +/* + * OMAP1510 GPIO registers + */ +#define OMAP1510_GPIO_DATA_INPUT 0x00 +#define OMAP1510_GPIO_DATA_OUTPUT 0x04 +#define OMAP1510_GPIO_DIR_CONTROL 0x08 +#define OMAP1510_GPIO_INT_CONTROL 0x0c +#define OMAP1510_GPIO_INT_MASK 0x10 +#define OMAP1510_GPIO_INT_STATUS 0x14 +#define OMAP1510_GPIO_PIN_CONTROL 0x18 + +#define OMAP1510_IH_GPIO_BASE 64 + +/* + * OMAP1610 specific GPIO registers + */ +#define OMAP1610_GPIO_REVISION 0x0000 +#define OMAP1610_GPIO_SYSCONFIG 0x0010 +#define OMAP1610_GPIO_SYSSTATUS 0x0014 +#define OMAP1610_GPIO_IRQSTATUS1 0x0018 +#define OMAP1610_GPIO_IRQENABLE1 0x001c +#define OMAP1610_GPIO_WAKEUPENABLE 0x0028 +#define OMAP1610_GPIO_DATAIN 0x002c +#define OMAP1610_GPIO_DATAOUT 0x0030 +#define OMAP1610_GPIO_DIRECTION 0x0034 +#define OMAP1610_GPIO_EDGE_CTRL1 0x0038 +#define OMAP1610_GPIO_EDGE_CTRL2 0x003c +#define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c +#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8 +#define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0 +#define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc +#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8 +#define OMAP1610_GPIO_SET_DATAOUT 0x00f0 + +/* + * OMAP7XX specific GPIO registers + */ +#define OMAP7XX_GPIO_DATA_INPUT 0x00 +#define OMAP7XX_GPIO_DATA_OUTPUT 0x04 +#define OMAP7XX_GPIO_DIR_CONTROL 0x08 +#define OMAP7XX_GPIO_INT_CONTROL 0x0c +#define OMAP7XX_GPIO_INT_MASK 0x10 +#define OMAP7XX_GPIO_INT_STATUS 0x14 + +/* + * omap2+ specific GPIO registers + */ +#define OMAP24XX_GPIO_REVISION 0x0000 +#define OMAP24XX_GPIO_IRQSTATUS1 0x0018 +#define OMAP24XX_GPIO_IRQSTATUS2 0x0028 +#define OMAP24XX_GPIO_IRQENABLE2 0x002c +#define OMAP24XX_GPIO_IRQENABLE1 0x001c +#define OMAP24XX_GPIO_WAKE_EN 0x0020 +#define OMAP24XX_GPIO_CTRL 0x0030 +#define OMAP24XX_GPIO_OE 0x0034 +#define OMAP24XX_GPIO_DATAIN 0x0038 +#define OMAP24XX_GPIO_DATAOUT 0x003c +#define OMAP24XX_GPIO_LEVELDETECT0 0x0040 +#define OMAP24XX_GPIO_LEVELDETECT1 0x0044 +#define OMAP24XX_GPIO_RISINGDETECT 0x0048 +#define OMAP24XX_GPIO_FALLINGDETECT 0x004c +#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050 +#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054 +#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060 +#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064 +#define OMAP24XX_GPIO_CLEARWKUENA 0x0080 +#define OMAP24XX_GPIO_SETWKUENA 0x0084 +#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 +#define OMAP24XX_GPIO_SETDATAOUT 0x0094 + +#define OMAP4_GPIO_REVISION 0x0000 +#define OMAP4_GPIO_EOI 0x0020 +#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024 +#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028 +#define OMAP4_GPIO_IRQSTATUS0 0x002c +#define OMAP4_GPIO_IRQSTATUS1 0x0030 +#define OMAP4_GPIO_IRQSTATUSSET0 0x0034 +#define OMAP4_GPIO_IRQSTATUSSET1 0x0038 +#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c +#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040 +#define OMAP4_GPIO_IRQWAKEN0 0x0044 +#define OMAP4_GPIO_IRQWAKEN1 0x0048 +#define OMAP4_GPIO_IRQENABLE1 0x011c +#define OMAP4_GPIO_WAKE_EN 0x0120 +#define OMAP4_GPIO_IRQSTATUS2 0x0128 +#define OMAP4_GPIO_IRQENABLE2 0x012c +#define OMAP4_GPIO_CTRL 0x0130 +#define OMAP4_GPIO_OE 0x0134 +#define OMAP4_GPIO_DATAIN 0x0138 +#define OMAP4_GPIO_DATAOUT 0x013c +#define OMAP4_GPIO_LEVELDETECT0 0x0140 +#define OMAP4_GPIO_LEVELDETECT1 0x0144 +#define OMAP4_GPIO_RISINGDETECT 0x0148 +#define OMAP4_GPIO_FALLINGDETECT 0x014c +#define OMAP4_GPIO_DEBOUNCENABLE 0x0150 +#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154 +#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160 +#define OMAP4_GPIO_SETIRQENABLE1 0x0164 +#define OMAP4_GPIO_CLEARWKUENA 0x0180 +#define OMAP4_GPIO_SETWKUENA 0x0184 +#define OMAP4_GPIO_CLEARDATAOUT 0x0190 +#define OMAP4_GPIO_SETDATAOUT 0x0194 + +#define OMAP_MAX_GPIO_LINES 192 + +#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) +#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) + +struct omap_gpio_dev_attr { + int bank_width; /* GPIO bank width */ + bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ +}; + +struct omap_gpio_reg_offs { + u16 revision; + u16 direction; + u16 datain; + u16 dataout; + u16 set_dataout; + u16 clr_dataout; + u16 irqstatus; + u16 irqstatus2; + u16 irqstatus_raw0; + u16 irqstatus_raw1; + u16 irqenable; + u16 irqenable2; + u16 set_irqenable; + u16 clr_irqenable; + u16 debounce; + u16 debounce_en; + u16 ctrl; + u16 wkup_en; + u16 leveldetect0; + u16 leveldetect1; + u16 risingdetect; + u16 fallingdetect; + u16 irqctrl; + u16 edgectrl1; + u16 edgectrl2; + u16 pinctrl; + + bool irqenable_inv; +}; + +struct omap_gpio_platform_data { + int bank_type; + int bank_width; /* GPIO bank width */ + int bank_stride; /* Only needed for omap1 MPUIO */ + bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ + bool loses_context; /* whether the bank would ever lose context */ + bool is_mpuio; /* whether the bank is of type MPUIO */ + u32 non_wakeup_gpios; + + struct omap_gpio_reg_offs *regs; + + /* Return context loss count due to PM states changing */ + int (*get_context_loss_count)(struct device *dev); +}; + +extern void omap2_gpio_prepare_for_idle(int off_mode); +extern void omap2_gpio_resume_after_idle(void); +extern void omap_set_gpio_debounce(int gpio, int enable); +extern void omap_set_gpio_debounce_time(int gpio, int enable); + +#endif diff --git a/kernel/include/linux/platform_data/gpio-rcar.h b/kernel/include/linux/platform_data/gpio-rcar.h new file mode 100644 index 000000000..2d8d69432 --- /dev/null +++ b/kernel/include/linux/platform_data/gpio-rcar.h @@ -0,0 +1,29 @@ +/* + * Renesas R-Car GPIO Support + * + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __GPIO_RCAR_H__ +#define __GPIO_RCAR_H__ + +struct gpio_rcar_config { + int gpio_base; + unsigned int irq_base; + unsigned int number_of_pins; + const char *pctl_name; + unsigned has_both_edge_trigger:1; +}; + +#define RCAR_GP_PIN(bank, pin) (((bank) * 32) + (pin)) + +#endif /* __GPIO_RCAR_H__ */ diff --git a/kernel/include/linux/platform_data/gpio-ts5500.h b/kernel/include/linux/platform_data/gpio-ts5500.h new file mode 100644 index 000000000..b10d11c9b --- /dev/null +++ b/kernel/include/linux/platform_data/gpio-ts5500.h @@ -0,0 +1,27 @@ +/* + * GPIO (DIO) header for Technologic Systems TS-5500 + * + * Copyright (c) 2012 Savoir-faire Linux Inc. + * Vivien Didelot <vivien.didelot@savoirfairelinux.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _PDATA_GPIO_TS5500_H +#define _PDATA_GPIO_TS5500_H + +/** + * struct ts5500_dio_platform_data - TS-5500 pin block configuration + * @base: The GPIO base number to use. + * @strap: The only pin connected to an interrupt in a block is input-only. + * If you need a bidirectional line which can trigger an IRQ, you + * may strap it with an in/out pin. This flag indicates this case. + */ +struct ts5500_dio_platform_data { + int base; + bool strap; +}; + +#endif /* _PDATA_GPIO_TS5500_H */ diff --git a/kernel/include/linux/platform_data/gpio_backlight.h b/kernel/include/linux/platform_data/gpio_backlight.h new file mode 100644 index 000000000..5ae0d9c80 --- /dev/null +++ b/kernel/include/linux/platform_data/gpio_backlight.h @@ -0,0 +1,21 @@ +/* + * gpio_backlight.h - Simple GPIO-controlled backlight + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __GPIO_BACKLIGHT_H__ +#define __GPIO_BACKLIGHT_H__ + +struct device; + +struct gpio_backlight_platform_data { + struct device *fbdev; + int gpio; + int def_value; + bool active_low; + const char *name; +}; + +#endif diff --git a/kernel/include/linux/platform_data/hsmmc-omap.h b/kernel/include/linux/platform_data/hsmmc-omap.h new file mode 100644 index 000000000..8e981be2e --- /dev/null +++ b/kernel/include/linux/platform_data/hsmmc-omap.h @@ -0,0 +1,88 @@ +/* + * MMC definitions for OMAP2 + * + * Copyright (C) 2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * struct omap_hsmmc_dev_attr.flags possibilities + * + * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can + * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag + * should be set if this is the case. See for example Section 22.5.3 + * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia + * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R). + * + * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers + * don't work correctly on some MMC controller instances on some + * OMAP3 SoCs; this flag should be set if this is the case. See + * for example Advisory 2.1.1.128 "MMC: Multiple Block Read + * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ + * Revision F (October 2010) (SPRZ278F). + */ +#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0) +#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1) +#define OMAP_HSMMC_SWAKEUP_MISSING BIT(2) + +struct omap_hsmmc_dev_attr { + u8 flags; +}; + +struct mmc_card; + +struct omap_hsmmc_platform_data { + /* back-link to device */ + struct device *dev; + + /* set if your board has components or wiring that limits the + * maximum frequency on the MMC bus */ + unsigned int max_freq; + + /* Integrating attributes from the omap_hwmod layer */ + u8 controller_flags; + + /* Register offset deviation */ + u16 reg_offset; + + /* + * 4/8 wires and any additional host capabilities + * need to OR'd all capabilities (ref. linux/mmc/host.h) + */ + u32 caps; /* Used for the MMC driver on 2430 and later */ + u32 pm_caps; /* PM capabilities of the mmc */ + + /* use the internal clock */ + unsigned internal_clock:1; + + /* nonremovable e.g. eMMC */ + unsigned nonremovable:1; + + /* eMMC does not handle power off when not in sleep state */ + unsigned no_regulator_off_init:1; + + /* we can put the features above into this variable */ +#define HSMMC_HAS_PBIAS (1 << 0) +#define HSMMC_HAS_UPDATED_RESET (1 << 1) +#define HSMMC_HAS_HSPE_SUPPORT (1 << 2) + unsigned features; + + int gpio_cd; /* gpio (card detect) */ + int gpio_cod; /* gpio (cover detect) */ + int gpio_wp; /* gpio (write protect) */ + + int (*set_power)(struct device *dev, int power_on, int vdd); + void (*remux)(struct device *dev, int power_on); + /* Call back before enabling / disabling regulators */ + void (*before_set_reg)(struct device *dev, int power_on, int vdd); + /* Call back after enabling / disabling regulators */ + void (*after_set_reg)(struct device *dev, int power_on, int vdd); + /* if we have special card, init it using this callback */ + void (*init_card)(struct mmc_card *card); + + const char *name; + u32 ocr_mask; +}; diff --git a/kernel/include/linux/platform_data/hwmon-s3c.h b/kernel/include/linux/platform_data/hwmon-s3c.h new file mode 100644 index 000000000..0e3cce130 --- /dev/null +++ b/kernel/include/linux/platform_data/hwmon-s3c.h @@ -0,0 +1,49 @@ +/* + * Copyright 2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C - HWMon interface for ADC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __HWMON_S3C_H__ +#define __HWMON_S3C_H__ + +/** + * s3c_hwmon_chcfg - channel configuration + * @name: The name to give this channel. + * @mult: Multiply the ADC value read by this. + * @div: Divide the value from the ADC by this. + * + * The value read from the ADC is converted to a value that + * hwmon expects (mV) by result = (value_read * @mult) / @div. + */ +struct s3c_hwmon_chcfg { + const char *name; + unsigned int mult; + unsigned int div; +}; + +/** + * s3c_hwmon_pdata - HWMON platform data + * @in: One configuration for each possible channel used. + */ +struct s3c_hwmon_pdata { + struct s3c_hwmon_chcfg *in[8]; +}; + +/** + * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device + * @pd: Platform data to register to device. + * + * Register the given platform data for use with the S3C HWMON device. + * The call will copy the platform data, so the board definitions can + * make the structure itself __initdata. + */ +extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd); + +#endif /* __HWMON_S3C_H__ */ diff --git a/kernel/include/linux/platform_data/i2c-cbus-gpio.h b/kernel/include/linux/platform_data/i2c-cbus-gpio.h new file mode 100644 index 000000000..6faa992a9 --- /dev/null +++ b/kernel/include/linux/platform_data/i2c-cbus-gpio.h @@ -0,0 +1,27 @@ +/* + * i2c-cbus-gpio.h - CBUS I2C platform_data definition + * + * Copyright (C) 2004-2009 Nokia Corporation + * + * Written by Felipe Balbi and Aaro Koskinen. + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __INCLUDE_LINUX_I2C_CBUS_GPIO_H +#define __INCLUDE_LINUX_I2C_CBUS_GPIO_H + +struct i2c_cbus_platform_data { + int dat_gpio; + int clk_gpio; + int sel_gpio; +}; + +#endif /* __INCLUDE_LINUX_I2C_CBUS_GPIO_H */ diff --git a/kernel/include/linux/platform_data/i2c-davinci.h b/kernel/include/linux/platform_data/i2c-davinci.h new file mode 100644 index 000000000..89fd34727 --- /dev/null +++ b/kernel/include/linux/platform_data/i2c-davinci.h @@ -0,0 +1,27 @@ +/* + * DaVinci I2C controller platform_device info + * + * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com> + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. +*/ + +#ifndef __ASM_ARCH_I2C_H +#define __ASM_ARCH_I2C_H + +/* All frequencies are expressed in kHz */ +struct davinci_i2c_platform_data { + unsigned int bus_freq; /* standard bus frequency (kHz) */ + unsigned int bus_delay; /* post-transaction delay (usec) */ + unsigned int sda_pin; /* GPIO pin ID to use for SDA */ + unsigned int scl_pin; /* GPIO pin ID to use for SCL */ + bool has_pfunc; /*chip has a ICPFUNC register */ +}; + +/* for board setup code */ +void davinci_init_i2c(struct davinci_i2c_platform_data *); + +#endif /* __ASM_ARCH_I2C_H */ diff --git a/kernel/include/linux/platform_data/i2c-designware.h b/kernel/include/linux/platform_data/i2c-designware.h new file mode 100644 index 000000000..7a61fb27c --- /dev/null +++ b/kernel/include/linux/platform_data/i2c-designware.h @@ -0,0 +1,21 @@ +/* + * Copyright(c) 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef I2C_DESIGNWARE_H +#define I2C_DESIGNWARE_H + +struct dw_i2c_platform_data { + unsigned int i2c_scl_freq; +}; + +#endif diff --git a/kernel/include/linux/platform_data/i2c-imx.h b/kernel/include/linux/platform_data/i2c-imx.h new file mode 100644 index 000000000..8289d915e --- /dev/null +++ b/kernel/include/linux/platform_data/i2c-imx.h @@ -0,0 +1,21 @@ +/* + * i2c.h - i.MX I2C driver header file + * + * Copyright (c) 2008, Darius Augulis <augulis.darius@gmail.com> + * + * This file is released under the GPLv2 + */ + +#ifndef __ASM_ARCH_I2C_H_ +#define __ASM_ARCH_I2C_H_ + +/** + * struct imxi2c_platform_data - structure of platform data for MXC I2C driver + * @bitrate: Bus speed measured in Hz + * + **/ +struct imxi2c_platform_data { + u32 bitrate; +}; + +#endif /* __ASM_ARCH_I2C_H_ */ diff --git a/kernel/include/linux/platform_data/i2c-nuc900.h b/kernel/include/linux/platform_data/i2c-nuc900.h new file mode 100644 index 000000000..9ffb12d06 --- /dev/null +++ b/kernel/include/linux/platform_data/i2c-nuc900.h @@ -0,0 +1,9 @@ +#ifndef __ASM_ARCH_NUC900_I2C_H +#define __ASM_ARCH_NUC900_I2C_H + +struct nuc900_platform_i2c { + int bus_num; + unsigned long bus_freq; +}; + +#endif /* __ASM_ARCH_NUC900_I2C_H */ diff --git a/kernel/include/linux/platform_data/i2c-s3c2410.h b/kernel/include/linux/platform_data/i2c-s3c2410.h new file mode 100644 index 000000000..05af66b84 --- /dev/null +++ b/kernel/include/linux/platform_data/i2c-s3c2410.h @@ -0,0 +1,78 @@ +/* + * Copyright 2004-2009 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C - I2C Controller platform_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __I2C_S3C2410_H +#define __I2C_S3C2410_H __FILE__ + +#define S3C_IICFLG_FILTER (1<<0) /* enable s3c2440 filter */ + +struct platform_device; + +/** + * struct s3c2410_platform_i2c - Platform data for s3c I2C. + * @bus_num: The bus number to use (if possible). + * @flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER). + * @slave_addr: The I2C address for the slave device (if enabled). + * @frequency: The desired frequency in Hz of the bus. This is + * guaranteed to not be exceeded. If the caller does + * not care, use zero and the driver will select a + * useful default. + * @sda_delay: The delay (in ns) applied to SDA edges. + * @cfg_gpio: A callback to configure the pins for I2C operation. + */ +struct s3c2410_platform_i2c { + int bus_num; + unsigned int flags; + unsigned int slave_addr; + unsigned long frequency; + unsigned int sda_delay; + + void (*cfg_gpio)(struct platform_device *dev); +}; + +/** + * s3c_i2c0_set_platdata - set platform data for i2c0 device + * @i2c: The platform data to set, or NULL for default data. + * + * Register the given platform data for use with the i2c0 device. This + * call copies the platform data, so the caller can use __initdata for + * their copy. + * + * This call will set cfg_gpio if is null to the default platform + * implementation. + * + * Any user of s3c_device_i2c0 should call this, even if it is with + * NULL to ensure that the device is given the default platform data + * as the driver will no longer carry defaults. + */ +extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c); + +/* defined by architecture to configure gpio */ +extern void s3c_i2c0_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c1_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c2_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c3_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c4_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c5_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c6_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c7_cfg_gpio(struct platform_device *dev); + +extern struct s3c2410_platform_i2c default_i2c_data; + +#endif /* __I2C_S3C2410_H */ diff --git a/kernel/include/linux/platform_data/ina2xx.h b/kernel/include/linux/platform_data/ina2xx.h new file mode 100644 index 000000000..9abc0ca72 --- /dev/null +++ b/kernel/include/linux/platform_data/ina2xx.h @@ -0,0 +1,19 @@ +/* + * Driver for Texas Instruments INA219, INA226 power monitor chips + * + * Copyright (C) 2012 Lothar Felten <l-felten@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * For further information, see the Documentation/hwmon/ina2xx file. + */ + +/** + * struct ina2xx_platform_data - ina2xx info + * @shunt_uohms shunt resistance in microohms + */ +struct ina2xx_platform_data { + long shunt_uohms; +}; diff --git a/kernel/include/linux/platform_data/intel-mid_wdt.h b/kernel/include/linux/platform_data/intel-mid_wdt.h new file mode 100644 index 000000000..b98253466 --- /dev/null +++ b/kernel/include/linux/platform_data/intel-mid_wdt.h @@ -0,0 +1,22 @@ +/* + * intel-mid_wdt: generic Intel MID SCU watchdog driver + * + * Copyright (C) 2014 Intel Corporation. All rights reserved. + * Contact: David Cohen <david.a.cohen@linux.intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General + * Public License as published by the Free Software Foundation. + */ + +#ifndef __INTEL_MID_WDT_H__ +#define __INTEL_MID_WDT_H__ + +#include <linux/platform_device.h> + +struct intel_mid_wdt_pdata { + int irq; + int (*probe)(struct platform_device *pdev); +}; + +#endif /*__INTEL_MID_WDT_H__*/ diff --git a/kernel/include/linux/platform_data/invensense_mpu6050.h b/kernel/include/linux/platform_data/invensense_mpu6050.h new file mode 100644 index 000000000..ad3aa7b95 --- /dev/null +++ b/kernel/include/linux/platform_data/invensense_mpu6050.h @@ -0,0 +1,31 @@ +/* +* Copyright (C) 2012 Invensense, Inc. +* +* This software is licensed under the terms of the GNU General Public +* License version 2, as published by the Free Software Foundation, and +* may be copied, distributed, and modified under those terms. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +#ifndef __INV_MPU6050_PLATFORM_H_ +#define __INV_MPU6050_PLATFORM_H_ + +/** + * struct inv_mpu6050_platform_data - Platform data for the mpu driver + * @orientation: Orientation matrix of the chip + * + * Contains platform specific information on how to configure the MPU6050 to + * work on this platform. The orientation matricies are 3x3 rotation matricies + * that are applied to the data to rotate from the mounting orientation to the + * platform orientation. The values must be one of 0, 1, or -1 and each row and + * column should have exactly 1 non-zero value. + */ +struct inv_mpu6050_platform_data { + __s8 orientation[9]; +}; + +#endif diff --git a/kernel/include/linux/platform_data/iommu-omap.h b/kernel/include/linux/platform_data/iommu-omap.h new file mode 100644 index 000000000..54a0a9582 --- /dev/null +++ b/kernel/include/linux/platform_data/iommu-omap.h @@ -0,0 +1,48 @@ +/* + * omap iommu: main structures + * + * Copyright (C) 2008-2009 Nokia Corporation + * + * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/platform_device.h> + +#define MMU_REG_SIZE 256 + +/** + * struct iommu_arch_data - omap iommu private data + * @name: name of the iommu device + * @iommu_dev: handle of the iommu device + * + * This is an omap iommu private data object, which binds an iommu user + * to its iommu device. This object should be placed at the iommu user's + * dev_archdata so generic IOMMU API can be used without having to + * utilize omap-specific plumbing anymore. + */ +struct omap_iommu_arch_data { + const char *name; + struct omap_iommu *iommu_dev; +}; + +/** + * struct omap_mmu_dev_attr - OMAP mmu device attributes for omap_hwmod + * @nr_tlb_entries: number of entries supported by the translation + * look-aside buffer (TLB). + */ +struct omap_mmu_dev_attr { + int nr_tlb_entries; +}; + +struct iommu_platform_data { + const char *name; + const char *reset_name; + int nr_tlb_entries; + + int (*assert_reset)(struct platform_device *pdev, const char *name); + int (*deassert_reset)(struct platform_device *pdev, const char *name); +}; diff --git a/kernel/include/linux/platform_data/irda-pxaficp.h b/kernel/include/linux/platform_data/irda-pxaficp.h new file mode 100644 index 000000000..3cd41f77d --- /dev/null +++ b/kernel/include/linux/platform_data/irda-pxaficp.h @@ -0,0 +1,25 @@ +#ifndef ASMARM_ARCH_IRDA_H +#define ASMARM_ARCH_IRDA_H + +/* board specific transceiver capabilities */ + +#define IR_OFF 1 +#define IR_SIRMODE 2 +#define IR_FIRMODE 4 + +struct pxaficp_platform_data { + int transceiver_cap; + void (*transceiver_mode)(struct device *dev, int mode); + int (*startup)(struct device *dev); + void (*shutdown)(struct device *dev); + int gpio_pwdown; /* powerdown GPIO for the IrDA chip */ + bool gpio_pwdown_inverted; /* gpio_pwdown is inverted */ +}; + +extern void pxa_set_ficp_info(struct pxaficp_platform_data *info); + +#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) +void pxa2xx_transceiver_mode(struct device *dev, int mode); +#endif + +#endif diff --git a/kernel/include/linux/platform_data/irda-sa11x0.h b/kernel/include/linux/platform_data/irda-sa11x0.h new file mode 100644 index 000000000..38f77b5e5 --- /dev/null +++ b/kernel/include/linux/platform_data/irda-sa11x0.h @@ -0,0 +1,20 @@ +/* + * arch/arm/include/asm/mach/irda.h + * + * Copyright (C) 2004 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_MACH_IRDA_H +#define __ASM_ARM_MACH_IRDA_H + +struct irda_platform_data { + int (*startup)(struct device *); + void (*shutdown)(struct device *); + int (*set_power)(struct device *, unsigned int state); + void (*set_speed)(struct device *, unsigned int speed); +}; + +#endif diff --git a/kernel/include/linux/platform_data/irq-renesas-intc-irqpin.h b/kernel/include/linux/platform_data/irq-renesas-intc-irqpin.h new file mode 100644 index 000000000..e4cb91106 --- /dev/null +++ b/kernel/include/linux/platform_data/irq-renesas-intc-irqpin.h @@ -0,0 +1,29 @@ +/* + * Renesas INTC External IRQ Pin Driver + * + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __IRQ_RENESAS_INTC_IRQPIN_H__ +#define __IRQ_RENESAS_INTC_IRQPIN_H__ + +struct renesas_intc_irqpin_config { + unsigned int sense_bitfield_width; + unsigned int irq_base; + bool control_parent; +}; + +#endif /* __IRQ_RENESAS_INTC_IRQPIN_H__ */ diff --git a/kernel/include/linux/platform_data/irq-renesas-irqc.h b/kernel/include/linux/platform_data/irq-renesas-irqc.h new file mode 100644 index 000000000..3ae17b3e0 --- /dev/null +++ b/kernel/include/linux/platform_data/irq-renesas-irqc.h @@ -0,0 +1,27 @@ +/* + * Renesas IRQC Driver + * + * Copyright (C) 2013 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __IRQ_RENESAS_IRQC_H__ +#define __IRQ_RENESAS_IRQC_H__ + +struct renesas_irqc_config { + unsigned int irq_base; +}; + +#endif /* __IRQ_RENESAS_IRQC_H__ */ diff --git a/kernel/include/linux/platform_data/isl9305.h b/kernel/include/linux/platform_data/isl9305.h new file mode 100644 index 000000000..1419133fa --- /dev/null +++ b/kernel/include/linux/platform_data/isl9305.h @@ -0,0 +1,30 @@ +/* + * isl9305 - Intersil ISL9305 DCDC regulator + * + * Copyright 2014 Linaro Ltd + * + * Author: Mark Brown <broonie@kernel.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ISL9305_H +#define __ISL9305_H + +#define ISL9305_DCD1 0 +#define ISL9305_DCD2 1 +#define ISL9305_LDO1 2 +#define ISL9305_LDO2 3 + +#define ISL9305_MAX_REGULATOR ISL9305_LDO2 + +struct regulator_init_data; + +struct isl9305_pdata { + struct regulator_init_data *init_data[ISL9305_MAX_REGULATOR]; +}; + +#endif diff --git a/kernel/include/linux/platform_data/keyboard-pxa930_rotary.h b/kernel/include/linux/platform_data/keyboard-pxa930_rotary.h new file mode 100644 index 000000000..053587caf --- /dev/null +++ b/kernel/include/linux/platform_data/keyboard-pxa930_rotary.h @@ -0,0 +1,20 @@ +#ifndef __ASM_ARCH_PXA930_ROTARY_H +#define __ASM_ARCH_PXA930_ROTARY_H + +/* NOTE: + * + * rotary can be either interpreted as a ralative input event (e.g. + * REL_WHEEL or REL_HWHEEL) or a specific key event (e.g. UP/DOWN + * or LEFT/RIGHT), depending on if up_key & down_key are assigned + * or rel_code is assigned a non-zero value. When all are non-zero, + * up_key and down_key will be preferred. + */ +struct pxa930_rotary_platform_data { + int up_key; + int down_key; + int rel_code; +}; + +void __init pxa930_set_rotarykey_info(struct pxa930_rotary_platform_data *info); + +#endif /* __ASM_ARCH_PXA930_ROTARY_H */ diff --git a/kernel/include/linux/platform_data/keyboard-spear.h b/kernel/include/linux/platform_data/keyboard-spear.h new file mode 100644 index 000000000..9248e3a7e --- /dev/null +++ b/kernel/include/linux/platform_data/keyboard-spear.h @@ -0,0 +1,164 @@ +/* + * Copyright (C) 2010 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_KEYBOARD_H +#define __PLAT_KEYBOARD_H + +#include <linux/bitops.h> +#include <linux/input.h> +#include <linux/input/matrix_keypad.h> +#include <linux/types.h> + +#define DECLARE_9x9_KEYMAP(_name) \ +int _name[] = { \ + KEY(0, 0, KEY_ESC), \ + KEY(0, 1, KEY_1), \ + KEY(0, 2, KEY_2), \ + KEY(0, 3, KEY_3), \ + KEY(0, 4, KEY_4), \ + KEY(0, 5, KEY_5), \ + KEY(0, 6, KEY_6), \ + KEY(0, 7, KEY_7), \ + KEY(0, 8, KEY_8), \ + KEY(1, 0, KEY_9), \ + KEY(1, 1, KEY_MINUS), \ + KEY(1, 2, KEY_EQUAL), \ + KEY(1, 3, KEY_BACKSPACE), \ + KEY(1, 4, KEY_TAB), \ + KEY(1, 5, KEY_Q), \ + KEY(1, 6, KEY_W), \ + KEY(1, 7, KEY_E), \ + KEY(1, 8, KEY_R), \ + KEY(2, 0, KEY_T), \ + KEY(2, 1, KEY_Y), \ + KEY(2, 2, KEY_U), \ + KEY(2, 3, KEY_I), \ + KEY(2, 4, KEY_O), \ + KEY(2, 5, KEY_P), \ + KEY(2, 6, KEY_LEFTBRACE), \ + KEY(2, 7, KEY_RIGHTBRACE), \ + KEY(2, 8, KEY_ENTER), \ + KEY(3, 0, KEY_LEFTCTRL), \ + KEY(3, 1, KEY_A), \ + KEY(3, 2, KEY_S), \ + KEY(3, 3, KEY_D), \ + KEY(3, 4, KEY_F), \ + KEY(3, 5, KEY_G), \ + KEY(3, 6, KEY_H), \ + KEY(3, 7, KEY_J), \ + KEY(3, 8, KEY_K), \ + KEY(4, 0, KEY_L), \ + KEY(4, 1, KEY_SEMICOLON), \ + KEY(4, 2, KEY_APOSTROPHE), \ + KEY(4, 3, KEY_GRAVE), \ + KEY(4, 4, KEY_LEFTSHIFT), \ + KEY(4, 5, KEY_BACKSLASH), \ + KEY(4, 6, KEY_Z), \ + KEY(4, 7, KEY_X), \ + KEY(4, 8, KEY_C), \ + KEY(5, 0, KEY_V), \ + KEY(5, 1, KEY_B), \ + KEY(5, 2, KEY_N), \ + KEY(5, 3, KEY_M), \ + KEY(5, 4, KEY_COMMA), \ + KEY(5, 5, KEY_DOT), \ + KEY(5, 6, KEY_SLASH), \ + KEY(5, 7, KEY_RIGHTSHIFT), \ + KEY(5, 8, KEY_KPASTERISK), \ + KEY(6, 0, KEY_LEFTALT), \ + KEY(6, 1, KEY_SPACE), \ + KEY(6, 2, KEY_CAPSLOCK), \ + KEY(6, 3, KEY_F1), \ + KEY(6, 4, KEY_F2), \ + KEY(6, 5, KEY_F3), \ + KEY(6, 6, KEY_F4), \ + KEY(6, 7, KEY_F5), \ + KEY(6, 8, KEY_F6), \ + KEY(7, 0, KEY_F7), \ + KEY(7, 1, KEY_F8), \ + KEY(7, 2, KEY_F9), \ + KEY(7, 3, KEY_F10), \ + KEY(7, 4, KEY_NUMLOCK), \ + KEY(7, 5, KEY_SCROLLLOCK), \ + KEY(7, 6, KEY_KP7), \ + KEY(7, 7, KEY_KP8), \ + KEY(7, 8, KEY_KP9), \ + KEY(8, 0, KEY_KPMINUS), \ + KEY(8, 1, KEY_KP4), \ + KEY(8, 2, KEY_KP5), \ + KEY(8, 3, KEY_KP6), \ + KEY(8, 4, KEY_KPPLUS), \ + KEY(8, 5, KEY_KP1), \ + KEY(8, 6, KEY_KP2), \ + KEY(8, 7, KEY_KP3), \ + KEY(8, 8, KEY_KP0), \ +} + +#define DECLARE_6x6_KEYMAP(_name) \ +int _name[] = { \ + KEY(0, 0, KEY_RESERVED), \ + KEY(0, 1, KEY_1), \ + KEY(0, 2, KEY_2), \ + KEY(0, 3, KEY_3), \ + KEY(0, 4, KEY_4), \ + KEY(0, 5, KEY_5), \ + KEY(1, 0, KEY_Q), \ + KEY(1, 1, KEY_W), \ + KEY(1, 2, KEY_E), \ + KEY(1, 3, KEY_R), \ + KEY(1, 4, KEY_T), \ + KEY(1, 5, KEY_Y), \ + KEY(2, 0, KEY_D), \ + KEY(2, 1, KEY_F), \ + KEY(2, 2, KEY_G), \ + KEY(2, 3, KEY_H), \ + KEY(2, 4, KEY_J), \ + KEY(2, 5, KEY_K), \ + KEY(3, 0, KEY_B), \ + KEY(3, 1, KEY_N), \ + KEY(3, 2, KEY_M), \ + KEY(3, 3, KEY_COMMA), \ + KEY(3, 4, KEY_DOT), \ + KEY(3, 5, KEY_SLASH), \ + KEY(4, 0, KEY_F6), \ + KEY(4, 1, KEY_F7), \ + KEY(4, 2, KEY_F8), \ + KEY(4, 3, KEY_F9), \ + KEY(4, 4, KEY_F10), \ + KEY(4, 5, KEY_NUMLOCK), \ + KEY(5, 0, KEY_KP2), \ + KEY(5, 1, KEY_KP3), \ + KEY(5, 2, KEY_KP0), \ + KEY(5, 3, KEY_KPDOT), \ + KEY(5, 4, KEY_RO), \ + KEY(5, 5, KEY_ZENKAKUHANKAKU), \ +} + +#define KEYPAD_9x9 0 +#define KEYPAD_6x6 1 +#define KEYPAD_2x2 2 + +/** + * struct kbd_platform_data - spear keyboard platform data + * keymap: pointer to keymap data (table and size) + * rep: enables key autorepeat + * mode: choose keyboard support(9x9, 6x6, 2x2) + * suspended_rate: rate at which keyboard would operate in suspended mode + * + * This structure is supposed to be used by platform code to supply + * keymaps to drivers that implement keyboards. + */ +struct kbd_platform_data { + const struct matrix_keymap_data *keymap; + bool rep; + unsigned int mode; + unsigned int suspended_rate; +}; + +#endif /* __PLAT_KEYBOARD_H */ diff --git a/kernel/include/linux/platform_data/keypad-ep93xx.h b/kernel/include/linux/platform_data/keypad-ep93xx.h new file mode 100644 index 000000000..adccee25b --- /dev/null +++ b/kernel/include/linux/platform_data/keypad-ep93xx.h @@ -0,0 +1,31 @@ +#ifndef __KEYPAD_EP93XX_H +#define __KEYPAD_EP93XX_H + +struct matrix_keymap_data; + +/* flags for the ep93xx_keypad driver */ +#define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */ +#define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */ +#define EP93XX_KEYPAD_BACK_DRIVE (1<<2) /* back driving mode */ +#define EP93XX_KEYPAD_TEST_MODE (1<<3) /* scan only column 0 */ +#define EP93XX_KEYPAD_KDIV (1<<4) /* 1/4 clock or 1/16 clock */ +#define EP93XX_KEYPAD_AUTOREPEAT (1<<5) /* enable key autorepeat */ + +/** + * struct ep93xx_keypad_platform_data - platform specific device structure + * @keymap_data: pointer to &matrix_keymap_data + * @debounce: debounce start count; terminal count is 0xff + * @prescale: row/column counter pre-scaler load value + * @flags: see above + */ +struct ep93xx_keypad_platform_data { + struct matrix_keymap_data *keymap_data; + unsigned int debounce; + unsigned int prescale; + unsigned int flags; +}; + +#define EP93XX_MATRIX_ROWS (8) +#define EP93XX_MATRIX_COLS (8) + +#endif /* __KEYPAD_EP93XX_H */ diff --git a/kernel/include/linux/platform_data/keypad-nomadik-ske.h b/kernel/include/linux/platform_data/keypad-nomadik-ske.h new file mode 100644 index 000000000..31382fbc0 --- /dev/null +++ b/kernel/include/linux/platform_data/keypad-nomadik-ske.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Author: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> + * + * ux500 Scroll key and Keypad Encoder (SKE) header + */ + +#ifndef __SKE_H +#define __SKE_H + +#include <linux/input/matrix_keypad.h> + +/* register definitions for SKE peripheral */ +#define SKE_CR 0x00 +#define SKE_VAL0 0x04 +#define SKE_VAL1 0x08 +#define SKE_DBCR 0x0C +#define SKE_IMSC 0x10 +#define SKE_RIS 0x14 +#define SKE_MIS 0x18 +#define SKE_ICR 0x1C + +/* + * Keypad module + */ + +/** + * struct keypad_platform_data - structure for platform specific data + * @init: pointer to keypad init function + * @exit: pointer to keypad deinitialisation function + * @keymap_data: matrix scan code table for keycodes + * @krow: maximum number of rows + * @kcol: maximum number of columns + * @debounce_ms: platform specific debounce time + * @no_autorepeat: flag for auto repetition + * @wakeup_enable: allow waking up the system + */ +struct ske_keypad_platform_data { + int (*init)(void); + int (*exit)(void); + const struct matrix_keymap_data *keymap_data; + u8 krow; + u8 kcol; + u8 debounce_ms; + bool no_autorepeat; + bool wakeup_enable; +}; +#endif /*__SKE_KPD_H*/ diff --git a/kernel/include/linux/platform_data/keypad-omap.h b/kernel/include/linux/platform_data/keypad-omap.h new file mode 100644 index 000000000..c3a3abae9 --- /dev/null +++ b/kernel/include/linux/platform_data/keypad-omap.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __KEYPAD_OMAP_H +#define __KEYPAD_OMAP_H + +#ifndef CONFIG_ARCH_OMAP1 +#warning Please update the board to use matrix-keypad driver +#define omap_readw(reg) 0 +#define omap_writew(val, reg) do {} while (0) +#endif +#include <linux/input/matrix_keypad.h> + +struct omap_kp_platform_data { + int rows; + int cols; + const struct matrix_keymap_data *keymap_data; + bool rep; + unsigned long delay; + bool dbounce; + /* specific to OMAP242x*/ + unsigned int *row_gpios; + unsigned int *col_gpios; +}; + +/* Group (0..3) -- when multiple keys are pressed, only the + * keys pressed in the same group are considered as pressed. This is + * in order to workaround certain crappy HW designs that produce ghost + * keypresses. Two free bits, not used by neither row/col nor keynum, + * must be available for use as group bits. The below GROUP_SHIFT + * macro definition is based on some prior knowledge of the + * matrix_keypad defined KEY() macro internals. + */ +#define GROUP_SHIFT 14 +#define GROUP_0 (0 << GROUP_SHIFT) +#define GROUP_1 (1 << GROUP_SHIFT) +#define GROUP_2 (2 << GROUP_SHIFT) +#define GROUP_3 (3 << GROUP_SHIFT) +#define GROUP_MASK GROUP_3 +#if KEY_MAX & GROUP_MASK +#error Group bits in conflict with keynum bits +#endif + + +#endif + diff --git a/kernel/include/linux/platform_data/keypad-pxa27x.h b/kernel/include/linux/platform_data/keypad-pxa27x.h new file mode 100644 index 000000000..24625569d --- /dev/null +++ b/kernel/include/linux/platform_data/keypad-pxa27x.h @@ -0,0 +1,72 @@ +#ifndef __ASM_ARCH_PXA27x_KEYPAD_H +#define __ASM_ARCH_PXA27x_KEYPAD_H + +#include <linux/input.h> +#include <linux/input/matrix_keypad.h> + +#define MAX_MATRIX_KEY_ROWS (8) +#define MAX_MATRIX_KEY_COLS (8) +#define MATRIX_ROW_SHIFT (3) +#define MAX_DIRECT_KEY_NUM (8) + +/* pxa3xx keypad platform specific parameters + * + * NOTE: + * 1. direct_key_num indicates the number of keys in the direct keypad + * _plus_ the number of rotary-encoder sensor inputs, this can be + * left as 0 if only rotary encoders are enabled, the driver will + * automatically calculate this + * + * 2. direct_key_map is the key code map for the direct keys, if rotary + * encoder(s) are enabled, direct key 0/1(2/3) will be ignored + * + * 3. rotary can be either interpreted as a relative input event (e.g. + * REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT) + * + * 4. matrix key and direct key will use the same debounce_interval by + * default, which should be sufficient in most cases + * + * pxa168 keypad platform specific parameter + * + * NOTE: + * clear_wakeup_event callback is a workaround required to clear the + * keypad interrupt. The keypad wake must be cleared in addition to + * reading the MI/DI bits in the KPC register. + */ +struct pxa27x_keypad_platform_data { + + /* code map for the matrix keys */ + const struct matrix_keymap_data *matrix_keymap_data; + unsigned int matrix_key_rows; + unsigned int matrix_key_cols; + + /* direct keys */ + int direct_key_num; + unsigned int direct_key_map[MAX_DIRECT_KEY_NUM]; + /* the key output may be low active */ + int direct_key_low_active; + /* give board a chance to choose the start direct key */ + unsigned int direct_key_mask; + + /* rotary encoders 0 */ + int enable_rotary0; + int rotary0_rel_code; + int rotary0_up_key; + int rotary0_down_key; + + /* rotary encoders 1 */ + int enable_rotary1; + int rotary1_rel_code; + int rotary1_up_key; + int rotary1_down_key; + + /* key debounce interval */ + unsigned int debounce_interval; + + /* clear wakeup event requirement for pxa168 */ + void (*clear_wakeup_event)(void); +}; + +extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info); + +#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */ diff --git a/kernel/include/linux/platform_data/keypad-w90p910.h b/kernel/include/linux/platform_data/keypad-w90p910.h new file mode 100644 index 000000000..556778e8d --- /dev/null +++ b/kernel/include/linux/platform_data/keypad-w90p910.h @@ -0,0 +1,15 @@ +#ifndef __ASM_ARCH_W90P910_KEYPAD_H +#define __ASM_ARCH_W90P910_KEYPAD_H + +#include <linux/input/matrix_keypad.h> + +extern void mfp_set_groupi(struct device *dev); + +struct w90p910_keypad_platform_data { + const struct matrix_keymap_data *keymap_data; + + unsigned int prescale; + unsigned int debounce; +}; + +#endif /* __ASM_ARCH_W90P910_KEYPAD_H */ diff --git a/kernel/include/linux/platform_data/keyscan-davinci.h b/kernel/include/linux/platform_data/keyscan-davinci.h new file mode 100644 index 000000000..7a560e05b --- /dev/null +++ b/kernel/include/linux/platform_data/keyscan-davinci.h @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2009 Texas Instruments, Inc + * + * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef DAVINCI_KEYSCAN_H +#define DAVINCI_KEYSCAN_H + +#include <linux/io.h> + +enum davinci_matrix_types { + DAVINCI_KEYSCAN_MATRIX_4X4, + DAVINCI_KEYSCAN_MATRIX_5X3, +}; + +struct davinci_ks_platform_data { + int (*device_enable)(struct device *dev); + unsigned short *keymap; + u32 keymapsize; + u8 rep:1; + u8 strobe; + u8 interval; + u8 matrix_type; +}; + +#endif + diff --git a/kernel/include/linux/platform_data/lcd-mipid.h b/kernel/include/linux/platform_data/lcd-mipid.h new file mode 100644 index 000000000..8e52c6572 --- /dev/null +++ b/kernel/include/linux/platform_data/lcd-mipid.h @@ -0,0 +1,29 @@ +#ifndef __LCD_MIPID_H +#define __LCD_MIPID_H + +enum mipid_test_num { + MIPID_TEST_RGB_LINES, +}; + +enum mipid_test_result { + MIPID_TEST_SUCCESS, + MIPID_TEST_INVALID, + MIPID_TEST_FAILED, +}; + +#ifdef __KERNEL__ + +struct mipid_platform_data { + int nreset_gpio; + int data_lines; + + void (*shutdown)(struct mipid_platform_data *pdata); + void (*set_bklight_level)(struct mipid_platform_data *pdata, + int level); + int (*get_bklight_level)(struct mipid_platform_data *pdata); + int (*get_bklight_max)(struct mipid_platform_data *pdata); +}; + +#endif + +#endif diff --git a/kernel/include/linux/platform_data/leds-kirkwood-netxbig.h b/kernel/include/linux/platform_data/leds-kirkwood-netxbig.h new file mode 100644 index 000000000..d2be19a51 --- /dev/null +++ b/kernel/include/linux/platform_data/leds-kirkwood-netxbig.h @@ -0,0 +1,53 @@ +/* + * Platform data structure for netxbig LED driver + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __LEDS_KIRKWOOD_NETXBIG_H +#define __LEDS_KIRKWOOD_NETXBIG_H + +struct netxbig_gpio_ext { + unsigned *addr; + int num_addr; + unsigned *data; + int num_data; + unsigned enable; +}; + +enum netxbig_led_mode { + NETXBIG_LED_OFF, + NETXBIG_LED_ON, + NETXBIG_LED_SATA, + NETXBIG_LED_TIMER1, + NETXBIG_LED_TIMER2, + NETXBIG_LED_MODE_NUM, +}; + +#define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM + +struct netxbig_led_timer { + unsigned long delay_on; + unsigned long delay_off; + enum netxbig_led_mode mode; +}; + +struct netxbig_led { + const char *name; + const char *default_trigger; + int mode_addr; + int *mode_val; + int bright_addr; +}; + +struct netxbig_led_platform_data { + struct netxbig_gpio_ext *gpio_ext; + struct netxbig_led_timer *timer; + int num_timer; + struct netxbig_led *leds; + int num_leds; +}; + +#endif /* __LEDS_KIRKWOOD_NETXBIG_H */ diff --git a/kernel/include/linux/platform_data/leds-kirkwood-ns2.h b/kernel/include/linux/platform_data/leds-kirkwood-ns2.h new file mode 100644 index 000000000..6a9fed57f --- /dev/null +++ b/kernel/include/linux/platform_data/leds-kirkwood-ns2.h @@ -0,0 +1,24 @@ +/* + * Platform data structure for Network Space v2 LED driver + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __LEDS_KIRKWOOD_NS2_H +#define __LEDS_KIRKWOOD_NS2_H + +struct ns2_led { + const char *name; + const char *default_trigger; + unsigned cmd; + unsigned slow; +}; + +struct ns2_led_platform_data { + int num_leds; + struct ns2_led *leds; +}; + +#endif /* __LEDS_KIRKWOOD_NS2_H */ diff --git a/kernel/include/linux/platform_data/leds-lm355x.h b/kernel/include/linux/platform_data/leds-lm355x.h new file mode 100644 index 000000000..b88724bb0 --- /dev/null +++ b/kernel/include/linux/platform_data/leds-lm355x.h @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2012 Texas Instruments + * + * License Terms: GNU General Public License v2 + * + * Simple driver for Texas Instruments LM355x LED driver chip + * + * Author: G.Shark Jeong <gshark.jeong@gmail.com> + * Daniel Jeong <daniel.jeong@ti.com> + */ + +#define LM355x_NAME "leds-lm355x" +#define LM3554_NAME "leds-lm3554" +#define LM3556_NAME "leds-lm3556" + +/* lm3554 : strobe def. on */ +enum lm355x_strobe { + LM355x_PIN_STROBE_DISABLE = 0x00, + LM355x_PIN_STROBE_ENABLE = 0x01, +}; + +enum lm355x_torch { + LM355x_PIN_TORCH_DISABLE = 0, + LM3554_PIN_TORCH_ENABLE = 0x80, + LM3556_PIN_TORCH_ENABLE = 0x10, +}; + +enum lm355x_tx2 { + LM355x_PIN_TX_DISABLE = 0, + LM3554_PIN_TX_ENABLE = 0x20, + LM3556_PIN_TX_ENABLE = 0x40, +}; + +enum lm355x_ntc { + LM355x_PIN_NTC_DISABLE = 0, + LM3554_PIN_NTC_ENABLE = 0x08, + LM3556_PIN_NTC_ENABLE = 0x80, +}; + +enum lm355x_pmode { + LM355x_PMODE_DISABLE = 0, + LM355x_PMODE_ENABLE = 0x04, +}; + +/* + * struct lm3554_platform_data + * @pin_strobe: strobe input + * @pin_torch : input pin + * lm3554-tx1/torch/gpio1 + * lm3556-torch + * @pin_tx2 : input pin + * lm3554-envm/tx2/gpio2 + * lm3556-tx pin + * @ntc_pin : output pin + * lm3554-ledi/ntc + * lm3556-temp pin + * @pass_mode : pass mode + */ +struct lm355x_platform_data { + enum lm355x_strobe pin_strobe; + enum lm355x_torch pin_tx1; + enum lm355x_tx2 pin_tx2; + enum lm355x_ntc ntc_pin; + + enum lm355x_pmode pass_mode; +}; diff --git a/kernel/include/linux/platform_data/leds-lm3642.h b/kernel/include/linux/platform_data/leds-lm3642.h new file mode 100644 index 000000000..72d6ee6ad --- /dev/null +++ b/kernel/include/linux/platform_data/leds-lm3642.h @@ -0,0 +1,38 @@ +/* +* Copyright (C) 2012 Texas Instruments +* +* License Terms: GNU General Public License v2 +* +* Simple driver for Texas Instruments LM3642 LED driver chip +* +* Author: G.Shark Jeong <gshark.jeong@gmail.com> +* Daniel Jeong <daniel.jeong@ti.com> +*/ + +#ifndef __LINUX_LM3642_H +#define __LINUX_LM3642_H + +#define LM3642_NAME "leds-lm3642" + +enum lm3642_torch_pin_enable { + LM3642_TORCH_PIN_DISABLE = 0x00, + LM3642_TORCH_PIN_ENABLE = 0x10, +}; + +enum lm3642_strobe_pin_enable { + LM3642_STROBE_PIN_DISABLE = 0x00, + LM3642_STROBE_PIN_ENABLE = 0x20, +}; + +enum lm3642_tx_pin_enable { + LM3642_TX_PIN_DISABLE = 0x00, + LM3642_TX_PIN_ENABLE = 0x40, +}; + +struct lm3642_platform_data { + enum lm3642_torch_pin_enable torch_pin; + enum lm3642_strobe_pin_enable strobe_pin; + enum lm3642_tx_pin_enable tx_pin; +}; + +#endif /* __LINUX_LM3642_H */ diff --git a/kernel/include/linux/platform_data/leds-lp55xx.h b/kernel/include/linux/platform_data/leds-lp55xx.h new file mode 100644 index 000000000..624ff9eda --- /dev/null +++ b/kernel/include/linux/platform_data/leds-lp55xx.h @@ -0,0 +1,81 @@ +/* + * LP55XX Platform Data Header + * + * Copyright (C) 2012 Texas Instruments + * + * Author: Milo(Woogyom) Kim <milo.kim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * Derived from leds-lp5521.h, leds-lp5523.h + */ + +#ifndef _LEDS_LP55XX_H +#define _LEDS_LP55XX_H + +/* Clock configuration */ +#define LP55XX_CLOCK_AUTO 0 +#define LP55XX_CLOCK_INT 1 +#define LP55XX_CLOCK_EXT 2 + +struct lp55xx_led_config { + const char *name; + const char *default_trigger; + u8 chan_nr; + u8 led_current; /* mA x10, 0 if led is not connected */ + u8 max_current; +}; + +struct lp55xx_predef_pattern { + const u8 *r; + const u8 *g; + const u8 *b; + u8 size_r; + u8 size_g; + u8 size_b; +}; + +enum lp8501_pwr_sel { + LP8501_ALL_VDD, /* D1~9 are connected to VDD */ + LP8501_6VDD_3VOUT, /* D1~6 with VDD, D7~9 with VOUT */ + LP8501_3VDD_6VOUT, /* D1~6 with VOUT, D7~9 with VDD */ + LP8501_ALL_VOUT, /* D1~9 are connected to VOUT */ +}; + +/* + * struct lp55xx_platform_data + * @led_config : Configurable led class device + * @num_channels : Number of LED channels + * @label : Used for naming LEDs + * @clock_mode : Input clock mode. LP55XX_CLOCK_AUTO or _INT or _EXT + * @setup_resources : Platform specific function before enabling the chip + * @release_resources : Platform specific function after disabling the chip + * @enable : EN pin control by platform side + * @patterns : Predefined pattern data for RGB channels + * @num_patterns : Number of patterns + * @update_config : Value of CONFIG register + */ +struct lp55xx_platform_data { + + /* LED channel configuration */ + struct lp55xx_led_config *led_config; + u8 num_channels; + const char *label; + + /* Clock configuration */ + u8 clock_mode; + + /* optional enable GPIO */ + int enable_gpio; + + /* Predefined pattern data */ + struct lp55xx_predef_pattern *patterns; + unsigned int num_patterns; + + /* LP8501 specific */ + enum lp8501_pwr_sel pwr_sel; +}; + +#endif /* _LEDS_LP55XX_H */ diff --git a/kernel/include/linux/platform_data/leds-omap.h b/kernel/include/linux/platform_data/leds-omap.h new file mode 100644 index 000000000..56c9b2a0a --- /dev/null +++ b/kernel/include/linux/platform_data/leds-omap.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2006 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASMARM_ARCH_LED_H +#define ASMARM_ARCH_LED_H + +struct omap_led_config { + struct led_classdev cdev; + s16 gpio; +}; + +struct omap_led_platform_data { + s16 nr_leds; + struct omap_led_config *leds; +}; + +#endif diff --git a/kernel/include/linux/platform_data/leds-pca963x.h b/kernel/include/linux/platform_data/leds-pca963x.h new file mode 100644 index 000000000..e731f0036 --- /dev/null +++ b/kernel/include/linux/platform_data/leds-pca963x.h @@ -0,0 +1,42 @@ +/* + * PCA963X LED chip driver. + * + * Copyright 2012 bct electronic GmbH + * Copyright 2013 Qtechnology A/S + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __LINUX_PCA963X_H +#define __LINUX_PCA963X_H +#include <linux/leds.h> + +enum pca963x_outdrv { + PCA963X_OPEN_DRAIN, + PCA963X_TOTEM_POLE, /* aka push-pull */ +}; + +enum pca963x_blink_type { + PCA963X_SW_BLINK, + PCA963X_HW_BLINK, +}; + +struct pca963x_platform_data { + struct led_platform_data leds; + enum pca963x_outdrv outdrv; + enum pca963x_blink_type blink_type; +}; + +#endif /* __LINUX_PCA963X_H*/ diff --git a/kernel/include/linux/platform_data/leds-s3c24xx.h b/kernel/include/linux/platform_data/leds-s3c24xx.h new file mode 100644 index 000000000..441a6f290 --- /dev/null +++ b/kernel/include/linux/platform_data/leds-s3c24xx.h @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2006 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX - LEDs GPIO connector + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __LEDS_S3C24XX_H +#define __LEDS_S3C24XX_H + +#define S3C24XX_LEDF_ACTLOW (1<<0) /* LED is on when GPIO low */ +#define S3C24XX_LEDF_TRISTATE (1<<1) /* tristate to turn off */ + +struct s3c24xx_led_platdata { + unsigned int gpio; + unsigned int flags; + + char *name; + char *def_trigger; +}; + +#endif /* __LEDS_S3C24XX_H */ diff --git a/kernel/include/linux/platform_data/lm3630a_bl.h b/kernel/include/linux/platform_data/lm3630a_bl.h new file mode 100644 index 000000000..7538e38e2 --- /dev/null +++ b/kernel/include/linux/platform_data/lm3630a_bl.h @@ -0,0 +1,65 @@ +/* +* Simple driver for Texas Instruments LM3630A LED Flash driver chip +* Copyright (C) 2012 Texas Instruments +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +*/ + +#ifndef __LINUX_LM3630A_H +#define __LINUX_LM3630A_H + +#define LM3630A_NAME "lm3630a_bl" + +enum lm3630a_pwm_ctrl { + LM3630A_PWM_DISABLE = 0x00, + LM3630A_PWM_BANK_A, + LM3630A_PWM_BANK_B, + LM3630A_PWM_BANK_ALL, + LM3630A_PWM_BANK_A_ACT_LOW = 0x05, + LM3630A_PWM_BANK_B_ACT_LOW, + LM3630A_PWM_BANK_ALL_ACT_LOW, +}; + +enum lm3630a_leda_ctrl { + LM3630A_LEDA_DISABLE = 0x00, + LM3630A_LEDA_ENABLE = 0x04, + LM3630A_LEDA_ENABLE_LINEAR = 0x14, +}; + +enum lm3630a_ledb_ctrl { + LM3630A_LEDB_DISABLE = 0x00, + LM3630A_LEDB_ON_A = 0x01, + LM3630A_LEDB_ENABLE = 0x02, + LM3630A_LEDB_ENABLE_LINEAR = 0x0A, +}; + +#define LM3630A_MAX_BRIGHTNESS 255 +/* + *@leda_init_brt : led a init brightness. 4~255 + *@leda_max_brt : led a max brightness. 4~255 + *@leda_ctrl : led a disable, enable linear, enable exponential + *@ledb_init_brt : led b init brightness. 4~255 + *@ledb_max_brt : led b max brightness. 4~255 + *@ledb_ctrl : led b disable, enable linear, enable exponential + *@pwm_period : pwm period + *@pwm_ctrl : pwm disable, bank a or b, active high or low + */ +struct lm3630a_platform_data { + + /* led a config. */ + int leda_init_brt; + int leda_max_brt; + enum lm3630a_leda_ctrl leda_ctrl; + /* led b config. */ + int ledb_init_brt; + int ledb_max_brt; + enum lm3630a_ledb_ctrl ledb_ctrl; + /* pwm config. */ + unsigned int pwm_period; + enum lm3630a_pwm_ctrl pwm_ctrl; +}; + +#endif /* __LINUX_LM3630A_H */ diff --git a/kernel/include/linux/platform_data/lm3639_bl.h b/kernel/include/linux/platform_data/lm3639_bl.h new file mode 100644 index 000000000..5234cd5ed --- /dev/null +++ b/kernel/include/linux/platform_data/lm3639_bl.h @@ -0,0 +1,69 @@ +/* +* Simple driver for Texas Instruments LM3630 LED Flash driver chip +* Copyright (C) 2012 Texas Instruments +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License version 2 as +* published by the Free Software Foundation. +* +*/ + +#ifndef __LINUX_LM3639_H +#define __LINUX_LM3639_H + +#define LM3639_NAME "lm3639_bl" + +enum lm3639_pwm { + LM3639_PWM_DISABLE = 0x00, + LM3639_PWM_EN_ACTLOW = 0x48, + LM3639_PWM_EN_ACTHIGH = 0x40, +}; + +enum lm3639_strobe { + LM3639_STROBE_DISABLE = 0x00, + LM3639_STROBE_EN_ACTLOW = 0x10, + LM3639_STROBE_EN_ACTHIGH = 0x30, +}; + +enum lm3639_txpin { + LM3639_TXPIN_DISABLE = 0x00, + LM3639_TXPIN_EN_ACTLOW = 0x04, + LM3639_TXPIN_EN_ACTHIGH = 0x0C, +}; + +enum lm3639_fleds { + LM3639_FLED_DIASBLE_ALL = 0x00, + LM3639_FLED_EN_1 = 0x40, + LM3639_FLED_EN_2 = 0x20, + LM3639_FLED_EN_ALL = 0x60, +}; + +enum lm3639_bleds { + LM3639_BLED_DIASBLE_ALL = 0x00, + LM3639_BLED_EN_1 = 0x10, + LM3639_BLED_EN_2 = 0x08, + LM3639_BLED_EN_ALL = 0x18, +}; +enum lm3639_bled_mode { + LM3639_BLED_MODE_EXPONETIAL = 0x00, + LM3639_BLED_MODE_LINEAR = 0x10, +}; + +struct lm3639_platform_data { + unsigned int max_brt_led; + unsigned int init_brt_led; + + /* input pins */ + enum lm3639_pwm pin_pwm; + enum lm3639_strobe pin_strobe; + enum lm3639_txpin pin_tx; + + /* output pins */ + enum lm3639_fleds fled_pins; + enum lm3639_bleds bled_pins; + enum lm3639_bled_mode bled_mode; + + void (*pwm_set_intensity) (int brightness, int max_brightness); + int (*pwm_get_intensity) (void); +}; +#endif /* __LINUX_LM3639_H */ diff --git a/kernel/include/linux/platform_data/lp855x.h b/kernel/include/linux/platform_data/lp855x.h new file mode 100644 index 000000000..9c7fd1efe --- /dev/null +++ b/kernel/include/linux/platform_data/lp855x.h @@ -0,0 +1,151 @@ +/* + * LP855x Backlight Driver + * + * Copyright (C) 2011 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _LP855X_H +#define _LP855X_H + +#define BL_CTL_SHFT (0) +#define BRT_MODE_SHFT (1) +#define BRT_MODE_MASK (0x06) + +/* Enable backlight. Only valid when BRT_MODE=10(I2C only) */ +#define ENABLE_BL (1) +#define DISABLE_BL (0) + +#define I2C_CONFIG(id) id ## _I2C_CONFIG +#define PWM_CONFIG(id) id ## _PWM_CONFIG + +/* DEVICE CONTROL register - LP8550 */ +#define LP8550_PWM_CONFIG (LP8550_PWM_ONLY << BRT_MODE_SHFT) +#define LP8550_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \ + (LP8550_I2C_ONLY << BRT_MODE_SHFT)) + +/* DEVICE CONTROL register - LP8551 */ +#define LP8551_PWM_CONFIG LP8550_PWM_CONFIG +#define LP8551_I2C_CONFIG LP8550_I2C_CONFIG + +/* DEVICE CONTROL register - LP8552 */ +#define LP8552_PWM_CONFIG LP8550_PWM_CONFIG +#define LP8552_I2C_CONFIG LP8550_I2C_CONFIG + +/* DEVICE CONTROL register - LP8553 */ +#define LP8553_PWM_CONFIG LP8550_PWM_CONFIG +#define LP8553_I2C_CONFIG LP8550_I2C_CONFIG + +/* CONFIG register - LP8555 */ +#define LP8555_PWM_STANDBY BIT(7) +#define LP8555_PWM_FILTER BIT(6) +#define LP8555_RELOAD_EPROM BIT(3) /* use it if EPROMs should be reset + when the backlight turns on */ +#define LP8555_OFF_OPENLEDS BIT(2) +#define LP8555_PWM_CONFIG LP8555_PWM_ONLY +#define LP8555_I2C_CONFIG LP8555_I2C_ONLY +#define LP8555_COMB1_CONFIG LP8555_COMBINED1 +#define LP8555_COMB2_CONFIG LP8555_COMBINED2 + +/* DEVICE CONTROL register - LP8556 */ +#define LP8556_PWM_CONFIG (LP8556_PWM_ONLY << BRT_MODE_SHFT) +#define LP8556_COMB1_CONFIG (LP8556_COMBINED1 << BRT_MODE_SHFT) +#define LP8556_I2C_CONFIG ((ENABLE_BL << BL_CTL_SHFT) | \ + (LP8556_I2C_ONLY << BRT_MODE_SHFT)) +#define LP8556_COMB2_CONFIG (LP8556_COMBINED2 << BRT_MODE_SHFT) +#define LP8556_FAST_CONFIG BIT(7) /* use it if EPROMs should be maintained + when exiting the low power mode */ + +/* CONFIG register - LP8557 */ +#define LP8557_PWM_STANDBY BIT(7) +#define LP8557_PWM_FILTER BIT(6) +#define LP8557_RELOAD_EPROM BIT(3) /* use it if EPROMs should be reset + when the backlight turns on */ +#define LP8557_OFF_OPENLEDS BIT(2) +#define LP8557_PWM_CONFIG LP8557_PWM_ONLY +#define LP8557_I2C_CONFIG LP8557_I2C_ONLY +#define LP8557_COMB1_CONFIG LP8557_COMBINED1 +#define LP8557_COMB2_CONFIG LP8557_COMBINED2 + +enum lp855x_chip_id { + LP8550, + LP8551, + LP8552, + LP8553, + LP8555, + LP8556, + LP8557, +}; + +enum lp8550_brighntess_source { + LP8550_PWM_ONLY, + LP8550_I2C_ONLY = 2, +}; + +enum lp8551_brighntess_source { + LP8551_PWM_ONLY = LP8550_PWM_ONLY, + LP8551_I2C_ONLY = LP8550_I2C_ONLY, +}; + +enum lp8552_brighntess_source { + LP8552_PWM_ONLY = LP8550_PWM_ONLY, + LP8552_I2C_ONLY = LP8550_I2C_ONLY, +}; + +enum lp8553_brighntess_source { + LP8553_PWM_ONLY = LP8550_PWM_ONLY, + LP8553_I2C_ONLY = LP8550_I2C_ONLY, +}; + +enum lp8555_brightness_source { + LP8555_PWM_ONLY, + LP8555_I2C_ONLY, + LP8555_COMBINED1, /* Brightness register with shaped PWM */ + LP8555_COMBINED2, /* PWM with shaped brightness register */ +}; + +enum lp8556_brightness_source { + LP8556_PWM_ONLY, + LP8556_COMBINED1, /* pwm + i2c before the shaper block */ + LP8556_I2C_ONLY, + LP8556_COMBINED2, /* pwm + i2c after the shaper block */ +}; + +enum lp8557_brightness_source { + LP8557_PWM_ONLY, + LP8557_I2C_ONLY, + LP8557_COMBINED1, /* pwm + i2c after the shaper block */ + LP8557_COMBINED2, /* pwm + i2c before the shaper block */ +}; + +struct lp855x_rom_data { + u8 addr; + u8 val; +}; + +/** + * struct lp855x_platform_data + * @name : Backlight driver name. If it is not defined, default name is set. + * @device_control : value of DEVICE CONTROL register + * @initial_brightness : initial value of backlight brightness + * @period_ns : platform specific pwm period value. unit is nano. + Only valid when mode is PWM_BASED. + * @size_program : total size of lp855x_rom_data + * @rom_data : list of new eeprom/eprom registers + * @supply : regulator that supplies 3V input + */ +struct lp855x_platform_data { + const char *name; + u8 device_control; + u8 initial_brightness; + unsigned int period_ns; + int size_program; + struct lp855x_rom_data *rom_data; + struct regulator *supply; +}; + +#endif diff --git a/kernel/include/linux/platform_data/lp8727.h b/kernel/include/linux/platform_data/lp8727.h new file mode 100644 index 000000000..47128a50e --- /dev/null +++ b/kernel/include/linux/platform_data/lp8727.h @@ -0,0 +1,68 @@ +/* + * LP8727 Micro/Mini USB IC with integrated charger + * + * Copyright (C) 2011 Texas Instruments + * Copyright (C) 2011 National Semiconductor + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _LP8727_H +#define _LP8727_H + +enum lp8727_eoc_level { + LP8727_EOC_5P, + LP8727_EOC_10P, + LP8727_EOC_16P, + LP8727_EOC_20P, + LP8727_EOC_25P, + LP8727_EOC_33P, + LP8727_EOC_50P, +}; + +enum lp8727_ichg { + LP8727_ICHG_90mA, + LP8727_ICHG_100mA, + LP8727_ICHG_400mA, + LP8727_ICHG_450mA, + LP8727_ICHG_500mA, + LP8727_ICHG_600mA, + LP8727_ICHG_700mA, + LP8727_ICHG_800mA, + LP8727_ICHG_900mA, + LP8727_ICHG_1000mA, +}; + +/** + * struct lp8727_chg_param + * @eoc_level : end of charge level setting + * @ichg : charging current + */ +struct lp8727_chg_param { + enum lp8727_eoc_level eoc_level; + enum lp8727_ichg ichg; +}; + +/** + * struct lp8727_platform_data + * @get_batt_present : check battery status - exists or not + * @get_batt_level : get battery voltage (mV) + * @get_batt_capacity : get battery capacity (%) + * @get_batt_temp : get battery temperature + * @ac : charging parameters for AC type charger + * @usb : charging parameters for USB type charger + * @debounce_msec : interrupt debounce time + */ +struct lp8727_platform_data { + u8 (*get_batt_present)(void); + u16 (*get_batt_level)(void); + u8 (*get_batt_capacity)(void); + u8 (*get_batt_temp)(void); + struct lp8727_chg_param *ac; + struct lp8727_chg_param *usb; + unsigned int debounce_msec; +}; + +#endif diff --git a/kernel/include/linux/platform_data/lp8755.h b/kernel/include/linux/platform_data/lp8755.h new file mode 100644 index 000000000..a7fd0776c --- /dev/null +++ b/kernel/include/linux/platform_data/lp8755.h @@ -0,0 +1,71 @@ +/* + * LP8755 High Performance Power Management Unit Driver:System Interface Driver + * + * Copyright (C) 2012 Texas Instruments + * + * Author: Daniel(Geon Si) Jeong <daniel.jeong@ti.com> + * G.Shark Jeong <gshark.jeong@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _LP8755_H +#define _LP8755_H + +#include <linux/regulator/consumer.h> + +#define LP8755_NAME "lp8755-regulator" +/* + *PWR FAULT : power fault detected + *OCP : over current protect activated + *OVP : over voltage protect activated + *TEMP_WARN : thermal warning + *TEMP_SHDN : thermal shutdonw detected + *I_LOAD : current measured + */ +#define LP8755_EVENT_PWR_FAULT REGULATOR_EVENT_FAIL +#define LP8755_EVENT_OCP REGULATOR_EVENT_OVER_CURRENT +#define LP8755_EVENT_OVP 0x10000 +#define LP8755_EVENT_TEMP_WARN 0x2000 +#define LP8755_EVENT_TEMP_SHDN REGULATOR_EVENT_OVER_TEMP +#define LP8755_EVENT_I_LOAD 0x40000 + +enum lp8755_bucks { + LP8755_BUCK0 = 0, + LP8755_BUCK1, + LP8755_BUCK2, + LP8755_BUCK3, + LP8755_BUCK4, + LP8755_BUCK5, + LP8755_BUCK_MAX, +}; + +/** + * multiphase configuration options + */ +enum lp8755_mphase_config { + MPHASE_CONF0, + MPHASE_CONF1, + MPHASE_CONF2, + MPHASE_CONF3, + MPHASE_CONF4, + MPHASE_CONF5, + MPHASE_CONF6, + MPHASE_CONF7, + MPHASE_CONF8, + MPHASE_CONF_MAX +}; + +/** + * struct lp8755_platform_data + * @mphase_type : Multiphase Switcher Configurations. + * @buck_data : buck0~6 init voltage in uV + */ +struct lp8755_platform_data { + int mphase; + struct regulator_init_data *buck_data[LP8755_BUCK_MAX]; +}; +#endif diff --git a/kernel/include/linux/platform_data/lv5207lp.h b/kernel/include/linux/platform_data/lv5207lp.h new file mode 100644 index 000000000..7dc4d9a21 --- /dev/null +++ b/kernel/include/linux/platform_data/lv5207lp.h @@ -0,0 +1,19 @@ +/* + * lv5207lp.h - Sanyo LV5207LP LEDs Driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __LV5207LP_H__ +#define __LV5207LP_H__ + +struct device; + +struct lv5207lp_platform_data { + struct device *fbdev; + unsigned int max_value; + unsigned int def_value; +}; + +#endif diff --git a/kernel/include/linux/platform_data/macb.h b/kernel/include/linux/platform_data/macb.h new file mode 100644 index 000000000..044a124bf --- /dev/null +++ b/kernel/include/linux/platform_data/macb.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __MACB_PDATA_H__ +#define __MACB_PDATA_H__ + +struct macb_platform_data { + u32 phy_mask; + int phy_irq_pin; /* PHY IRQ */ + u8 is_rmii; /* using RMII interface? */ + u8 rev_eth_addr; /* reverse Ethernet address byte order */ +}; + +#endif /* __MACB_PDATA_H__ */ diff --git a/kernel/include/linux/platform_data/mailbox-omap.h b/kernel/include/linux/platform_data/mailbox-omap.h new file mode 100644 index 000000000..4631dbb42 --- /dev/null +++ b/kernel/include/linux/platform_data/mailbox-omap.h @@ -0,0 +1,58 @@ +/* + * mailbox-omap.h + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _PLAT_MAILBOX_H +#define _PLAT_MAILBOX_H + +/* Interrupt register configuration types */ +#define MBOX_INTR_CFG_TYPE1 (0) +#define MBOX_INTR_CFG_TYPE2 (1) + +/** + * struct omap_mbox_dev_info - OMAP mailbox device attribute info + * @name: name of the mailbox device + * @tx_id: mailbox queue id used for transmitting messages + * @rx_id: mailbox queue id on which messages are received + * @irq_id: irq identifier number to use from the hwmod data + * @usr_id: mailbox user id for identifying the interrupt into + * the MPU interrupt controller. + */ +struct omap_mbox_dev_info { + const char *name; + u32 tx_id; + u32 rx_id; + u32 irq_id; + u32 usr_id; +}; + +/** + * struct omap_mbox_pdata - OMAP mailbox platform data + * @intr_type: type of interrupt configuration registers used + while programming mailbox queue interrupts + * @num_users: number of users (processor devices) that the mailbox + * h/w block can interrupt + * @num_fifos: number of h/w fifos within the mailbox h/w block + * @info_cnt: number of mailbox devices for the platform + * @info: array of mailbox device attributes + */ +struct omap_mbox_pdata { + u32 intr_type; + u32 num_users; + u32 num_fifos; + u32 info_cnt; + struct omap_mbox_dev_info *info; +}; + +#endif /* _PLAT_MAILBOX_H */ diff --git a/kernel/include/linux/platform_data/max197.h b/kernel/include/linux/platform_data/max197.h new file mode 100644 index 000000000..8da8f94ee --- /dev/null +++ b/kernel/include/linux/platform_data/max197.h @@ -0,0 +1,26 @@ +/* + * Maxim MAX197 A/D Converter Driver + * + * Copyright (c) 2012 Savoir-faire Linux Inc. + * Vivien Didelot <vivien.didelot@savoirfairelinux.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * For further information, see the Documentation/hwmon/max197 file. + */ + +#ifndef _PDATA_MAX197_H +#define _PDATA_MAX197_H + +/** + * struct max197_platform_data - MAX197 connectivity info + * @convert: Function used to start a conversion with control byte ctrl. + * It must return the raw data, or a negative error code. + */ +struct max197_platform_data { + int (*convert)(u8 ctrl); +}; + +#endif /* _PDATA_MAX197_H */ diff --git a/kernel/include/linux/platform_data/max3421-hcd.h b/kernel/include/linux/platform_data/max3421-hcd.h new file mode 100644 index 000000000..0303d1970 --- /dev/null +++ b/kernel/include/linux/platform_data/max3421-hcd.h @@ -0,0 +1,24 @@ +/* + * Copyright (c) 2014 eGauge Systems LLC + * Contributed by David Mosberger-Tang <davidm@egauge.net> + * + * Platform-data structure for MAX3421 USB HCD driver. + * + */ +#ifndef MAX3421_HCD_PLAT_H_INCLUDED +#define MAX3421_HCD_PLAT_H_INCLUDED + +/* + * This structure defines the mapping of certain auxiliary functions to the + * MAX3421E GPIO pins. The chip has eight GP inputs and eight GP outputs. + * A value of 0 indicates that the pin is not used/wired to anything. + * + * At this point, the only control the max3421-hcd driver cares about is + * to control Vbus (5V to the peripheral). + */ +struct max3421_hcd_platform_data { + u8 vbus_gpout; /* pin controlling Vbus */ + u8 vbus_active_level; /* level that turns on power */ +}; + +#endif /* MAX3421_HCD_PLAT_H_INCLUDED */ diff --git a/kernel/include/linux/platform_data/max6697.h b/kernel/include/linux/platform_data/max6697.h new file mode 100644 index 000000000..ed9d3b3da --- /dev/null +++ b/kernel/include/linux/platform_data/max6697.h @@ -0,0 +1,36 @@ +/* + * max6697.h + * Copyright (c) 2012 Guenter Roeck <linux@roeck-us.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef MAX6697_H +#define MAX6697_H + +#include <linux/types.h> + +/* + * For all bit masks: + * bit 0: local temperature + * bit 1..7: remote temperatures + */ +struct max6697_platform_data { + bool smbus_timeout_disable; /* set to disable SMBus timeouts */ + bool extended_range_enable; /* set to enable extended temp range */ + bool beta_compensation; /* set to enable beta compensation */ + u8 alert_mask; /* set bit to 1 to disable alert */ + u8 over_temperature_mask; /* set bit to 1 to disable */ + u8 resistance_cancellation; /* set bit to 0 to disable + * bit mask for MAX6581, + * boolean for other chips + */ + u8 ideality_mask; /* set bit to 0 to disable */ + u8 ideality_value; /* transistor ideality as per + * MAX6581 datasheet + */ +}; + +#endif /* MAX6697_H */ diff --git a/kernel/include/linux/platform_data/mfd-mcp-sa11x0.h b/kernel/include/linux/platform_data/mfd-mcp-sa11x0.h new file mode 100644 index 000000000..747cd6baf --- /dev/null +++ b/kernel/include/linux/platform_data/mfd-mcp-sa11x0.h @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2005 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __MFD_MCP_SA11X0_H +#define __MFD_MCP_SA11X0_H + +#include <linux/types.h> + +struct mcp_plat_data { + u32 mccr0; + u32 mccr1; + unsigned int sclk_rate; + void *codec_pdata; +}; + +#endif diff --git a/kernel/include/linux/platform_data/microread.h b/kernel/include/linux/platform_data/microread.h new file mode 100644 index 000000000..cfda59b22 --- /dev/null +++ b/kernel/include/linux/platform_data/microread.h @@ -0,0 +1,35 @@ +/* + * Driver include for the PN544 NFC chip. + * + * Copyright (C) 2011 Tieto Poland + * Copyright (C) 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _MICROREAD_H +#define _MICROREAD_H + +#include <linux/i2c.h> + +#define MICROREAD_DRIVER_NAME "microread" + +/* board config platform data for microread */ +struct microread_nfc_platform_data { + unsigned int rst_gpio; + unsigned int irq_gpio; + unsigned int ioh_gpio; +}; + +#endif /* _MICROREAD_H */ diff --git a/kernel/include/linux/platform_data/mmc-atmel-mci.h b/kernel/include/linux/platform_data/mmc-atmel-mci.h new file mode 100644 index 000000000..399a2d5a1 --- /dev/null +++ b/kernel/include/linux/platform_data/mmc-atmel-mci.h @@ -0,0 +1,22 @@ +#ifndef __MMC_ATMEL_MCI_H +#define __MMC_ATMEL_MCI_H + +#include <linux/platform_data/dma-atmel.h> +#include <linux/platform_data/dma-dw.h> + +/** + * struct mci_dma_data - DMA data for MCI interface + */ +struct mci_dma_data { +#ifdef CONFIG_ARM + struct at_dma_slave sdata; +#else + struct dw_dma_slave sdata; +#endif +}; + +/* accessor macros */ +#define slave_data_ptr(s) (&(s)->sdata) +#define find_slave_dev(s) ((s)->sdata.dma_dev) + +#endif /* __MMC_ATMEL_MCI_H */ diff --git a/kernel/include/linux/platform_data/mmc-davinci.h b/kernel/include/linux/platform_data/mmc-davinci.h new file mode 100644 index 000000000..9cea4ee37 --- /dev/null +++ b/kernel/include/linux/platform_data/mmc-davinci.h @@ -0,0 +1,36 @@ +/* + * Board-specific MMC configuration + */ + +#ifndef _DAVINCI_MMC_H +#define _DAVINCI_MMC_H + +#include <linux/types.h> +#include <linux/mmc/host.h> + +struct davinci_mmc_config { + /* get_cd()/get_wp() may sleep */ + int (*get_cd)(int module); + int (*get_ro)(int module); + + void (*set_power)(int module, bool on); + + /* wires == 0 is equivalent to wires == 4 (4-bit parallel) */ + u8 wires; + + u32 max_freq; + + /* any additional host capabilities: OR'd in to mmc->f_caps */ + u32 caps; + + /* Number of sg segments */ + u8 nr_sg; +}; +void davinci_setup_mmc(int module, struct davinci_mmc_config *config); + +enum { + MMC_CTLR_VERSION_1 = 0, /* DM644x and DM355 */ + MMC_CTLR_VERSION_2, /* DA830 */ +}; + +#endif diff --git a/kernel/include/linux/platform_data/mmc-esdhc-imx.h b/kernel/include/linux/platform_data/mmc-esdhc-imx.h new file mode 100644 index 000000000..75f70f6ac --- /dev/null +++ b/kernel/include/linux/platform_data/mmc-esdhc-imx.h @@ -0,0 +1,50 @@ +/* + * Copyright 2010 Wolfram Sang <w.sang@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#ifndef __ASM_ARCH_IMX_ESDHC_H +#define __ASM_ARCH_IMX_ESDHC_H + +#include <linux/types.h> + +enum wp_types { + ESDHC_WP_NONE, /* no WP, neither controller nor gpio */ + ESDHC_WP_CONTROLLER, /* mmc controller internal WP */ + ESDHC_WP_GPIO, /* external gpio pin for WP */ +}; + +enum cd_types { + ESDHC_CD_NONE, /* no CD, neither controller nor gpio */ + ESDHC_CD_CONTROLLER, /* mmc controller internal CD */ + ESDHC_CD_GPIO, /* external gpio pin for CD */ + ESDHC_CD_PERMANENT, /* no CD, card permanently wired to host */ +}; + +/** + * struct esdhc_platform_data - platform data for esdhc on i.MX + * + * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35. + * + * @wp_gpio: gpio for write_protect + * @cd_gpio: gpio for card_detect interrupt + * @wp_type: type of write_protect method (see wp_types enum above) + * @cd_type: type of card_detect method (see cd_types enum above) + * @support_vsel: indicate it supports 1.8v switching + */ + +struct esdhc_platform_data { + unsigned int wp_gpio; + unsigned int cd_gpio; + enum wp_types wp_type; + enum cd_types cd_type; + int max_bus_width; + unsigned int f_max; + bool support_vsel; + unsigned int delay_line; +}; +#endif /* __ASM_ARCH_IMX_ESDHC_H */ diff --git a/kernel/include/linux/platform_data/mmc-mvsdio.h b/kernel/include/linux/platform_data/mmc-mvsdio.h new file mode 100644 index 000000000..d02704cd3 --- /dev/null +++ b/kernel/include/linux/platform_data/mmc-mvsdio.h @@ -0,0 +1,18 @@ +/* + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MMC_MVSDIO_H +#define __MMC_MVSDIO_H + +#include <linux/mbus.h> + +struct mvsdio_platform_data { + unsigned int clock; + int gpio_card_detect; + int gpio_write_protect; +}; + +#endif diff --git a/kernel/include/linux/platform_data/mmc-mxcmmc.h b/kernel/include/linux/platform_data/mmc-mxcmmc.h new file mode 100644 index 000000000..29115f405 --- /dev/null +++ b/kernel/include/linux/platform_data/mmc-mxcmmc.h @@ -0,0 +1,39 @@ +#ifndef ASMARM_ARCH_MMC_H +#define ASMARM_ARCH_MMC_H + +#include <linux/mmc/host.h> + +struct device; + +/* board specific SDHC data, optional. + * If not present, a writable card with 3,3V is assumed. + */ +struct imxmmc_platform_data { + /* Return values for the get_ro callback should be: + * 0 for a read/write card + * 1 for a read-only card + * -ENOSYS when not supported (equal to NULL callback) + * or a negative errno value when something bad happened + */ + int (*get_ro)(struct device *); + + /* board specific hook to (de)initialize the SD slot. + * The board code can call 'handler' on a card detection + * change giving data as argument. + */ + int (*init)(struct device *dev, irq_handler_t handler, void *data); + void (*exit)(struct device *dev, void *data); + + /* available voltages. If not given, assume + * MMC_VDD_32_33 | MMC_VDD_33_34 + */ + unsigned int ocr_avail; + + /* adjust slot voltage */ + void (*setpower)(struct device *, unsigned int vdd); + + /* enable card detect using DAT3 */ + int dat3_card_detect; +}; + +#endif diff --git a/kernel/include/linux/platform_data/mmc-omap.h b/kernel/include/linux/platform_data/mmc-omap.h new file mode 100644 index 000000000..929469291 --- /dev/null +++ b/kernel/include/linux/platform_data/mmc-omap.h @@ -0,0 +1,121 @@ +/* + * MMC definitions for OMAP2 + * + * Copyright (C) 2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define OMAP_MMC_MAX_SLOTS 2 + +struct mmc_card; + +struct omap_mmc_platform_data { + /* back-link to device */ + struct device *dev; + + /* number of slots per controller */ + unsigned nr_slots:2; + + /* set if your board has components or wiring that limits the + * maximum frequency on the MMC bus */ + unsigned int max_freq; + + /* switch the bus to a new slot */ + int (*switch_slot)(struct device *dev, int slot); + /* initialize board-specific MMC functionality, can be NULL if + * not supported */ + int (*init)(struct device *dev); + void (*cleanup)(struct device *dev); + void (*shutdown)(struct device *dev); + + /* Return context loss count due to PM states changing */ + int (*get_context_loss_count)(struct device *dev); + + /* Integrating attributes from the omap_hwmod layer */ + u8 controller_flags; + + /* Register offset deviation */ + u16 reg_offset; + + struct omap_mmc_slot_data { + + /* + * 4/8 wires and any additional host capabilities + * need to OR'd all capabilities (ref. linux/mmc/host.h) + */ + u8 wires; /* Used for the MMC driver on omap1 and 2420 */ + u32 caps; /* Used for the MMC driver on 2430 and later */ + u32 pm_caps; /* PM capabilities of the mmc */ + + /* + * nomux means "standard" muxing is wrong on this board, and + * that board-specific code handled it before common init logic. + */ + unsigned nomux:1; + + /* switch pin can be for card detect (default) or card cover */ + unsigned cover:1; + + /* use the internal clock */ + unsigned internal_clock:1; + + /* nonremovable e.g. eMMC */ + unsigned nonremovable:1; + + /* Try to sleep or power off when possible */ + unsigned power_saving:1; + + /* If using power_saving and the MMC power is not to go off */ + unsigned no_off:1; + + /* eMMC does not handle power off when not in sleep state */ + unsigned no_regulator_off_init:1; + + /* Regulator off remapped to sleep */ + unsigned vcc_aux_disable_is_sleep:1; + + /* we can put the features above into this variable */ +#define MMC_OMAP7XX (1 << 3) +#define MMC_OMAP15XX (1 << 4) +#define MMC_OMAP16XX (1 << 5) + unsigned features; + + int switch_pin; /* gpio (card detect) */ + int gpio_wp; /* gpio (write protect) */ + + int (*set_bus_mode)(struct device *dev, int slot, int bus_mode); + int (*set_power)(struct device *dev, int slot, + int power_on, int vdd); + int (*get_ro)(struct device *dev, int slot); + void (*remux)(struct device *dev, int slot, int power_on); + /* Call back before enabling / disabling regulators */ + void (*before_set_reg)(struct device *dev, int slot, + int power_on, int vdd); + /* Call back after enabling / disabling regulators */ + void (*after_set_reg)(struct device *dev, int slot, + int power_on, int vdd); + /* if we have special card, init it using this callback */ + void (*init_card)(struct mmc_card *card); + + /* return MMC cover switch state, can be NULL if not supported. + * + * possible return values: + * 0 - closed + * 1 - open + */ + int (*get_cover_state)(struct device *dev, int slot); + + const char *name; + u32 ocr_mask; + + /* Card detection IRQs */ + int card_detect_irq; + int (*card_detect)(struct device *dev, int slot); + + unsigned int ban_openended:1; + + } slots[OMAP_MMC_MAX_SLOTS]; +}; diff --git a/kernel/include/linux/platform_data/mmc-pxamci.h b/kernel/include/linux/platform_data/mmc-pxamci.h new file mode 100644 index 000000000..1706b3597 --- /dev/null +++ b/kernel/include/linux/platform_data/mmc-pxamci.h @@ -0,0 +1,28 @@ +#ifndef ASMARM_ARCH_MMC_H +#define ASMARM_ARCH_MMC_H + +#include <linux/mmc/host.h> +#include <linux/interrupt.h> + +struct device; +struct mmc_host; + +struct pxamci_platform_data { + unsigned int ocr_mask; /* available voltages */ + unsigned long detect_delay_ms; /* delay in millisecond before detecting cards after interrupt */ + int (*init)(struct device *, irq_handler_t , void *); + int (*get_ro)(struct device *); + int (*setpower)(struct device *, unsigned int); + void (*exit)(struct device *, void *); + int gpio_card_detect; /* gpio detecting card insertion */ + int gpio_card_ro; /* gpio detecting read only toggle */ + bool gpio_card_ro_invert; /* gpio ro is inverted */ + int gpio_power; /* gpio powering up MMC bus */ + bool gpio_power_invert; /* gpio power is inverted */ +}; + +extern void pxa_set_mci_info(struct pxamci_platform_data *info); +extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info); +extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info); + +#endif diff --git a/kernel/include/linux/platform_data/mmc-s3cmci.h b/kernel/include/linux/platform_data/mmc-s3cmci.h new file mode 100644 index 000000000..c42d31711 --- /dev/null +++ b/kernel/include/linux/platform_data/mmc-s3cmci.h @@ -0,0 +1,52 @@ +#ifndef _ARCH_MCI_H +#define _ARCH_MCI_H + +/** + * struct s3c24xx_mci_pdata - sd/mmc controller platform data + * @no_wprotect: Set this to indicate there is no write-protect switch. + * @no_detect: Set this if there is no detect switch. + * @wprotect_invert: Invert the default sense of the write protect switch. + * @detect_invert: Invert the default sense of the write protect switch. + * @use_dma: Set to allow the use of DMA. + * @gpio_detect: GPIO number for the card detect line. + * @gpio_wprotect: GPIO number for the write protect line. + * @ocr_avail: The mask of the available power states, non-zero to use. + * @set_power: Callback to control the power mode. + * + * The @gpio_detect is used for card detection when @no_wprotect is unset, + * and the default sense is that 0 returned from gpio_get_value() means + * that a card is inserted. If @detect_invert is set, then the value from + * gpio_get_value() is inverted, which makes 1 mean card inserted. + * + * The driver will use @gpio_wprotect to signal whether the card is write + * protected if @no_wprotect is not set. A 0 returned from gpio_get_value() + * means the card is read/write, and 1 means read-only. The @wprotect_invert + * will invert the value returned from gpio_get_value(). + * + * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set + * to a non-zero value, otherwise the default of 3.2-3.4V is used. + */ +struct s3c24xx_mci_pdata { + unsigned int no_wprotect:1; + unsigned int no_detect:1; + unsigned int wprotect_invert:1; + unsigned int detect_invert:1; /* set => detect active high */ + unsigned int use_dma:1; + + unsigned int gpio_detect; + unsigned int gpio_wprotect; + unsigned long ocr_avail; + void (*set_power)(unsigned char power_mode, + unsigned short vdd); +}; + +/** + * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device + * @pdata: The platform data + * + * Copy the platform data supplied by @pdata so that this can be marked + * __initdata. + */ +extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata); + +#endif /* _ARCH_NCI_H */ diff --git a/kernel/include/linux/platform_data/mmc-sdhci-s3c.h b/kernel/include/linux/platform_data/mmc-sdhci-s3c.h new file mode 100644 index 000000000..249f02387 --- /dev/null +++ b/kernel/include/linux/platform_data/mmc-sdhci-s3c.h @@ -0,0 +1,56 @@ +#ifndef __PLATFORM_DATA_SDHCI_S3C_H +#define __PLATFORM_DATA_SDHCI_S3C_H + +struct platform_device; + +enum cd_types { + S3C_SDHCI_CD_INTERNAL, /* use mmc internal CD line */ + S3C_SDHCI_CD_EXTERNAL, /* use external callback */ + S3C_SDHCI_CD_GPIO, /* use external gpio pin for CD line */ + S3C_SDHCI_CD_NONE, /* no CD line, use polling to detect card */ + S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */ +}; + +/** + * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI + * @max_width: The maximum number of data bits supported. + * @host_caps: Standard MMC host capabilities bit field. + * @host_caps2: The second standard MMC host capabilities bit field. + * @cd_type: Type of Card Detection method (see cd_types enum above) + * @ext_cd_init: Initialize external card detect subsystem. Called on + * sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL. + * notify_func argument is a callback to the sdhci-s3c driver + * that triggers the card detection event. Callback arguments: + * dev is pointer to platform device of the host controller, + * state is new state of the card (0 - removed, 1 - inserted). + * @ext_cd_cleanup: Cleanup external card detect subsystem. Called on + * sdhci-s3c driver remove when cd_type == S3C_SDHCI_CD_EXTERNAL. + * notify_func argument is the same callback as for ext_cd_init. + * @ext_cd_gpio: gpio pin used for external CD line, valid only if + * cd_type == S3C_SDHCI_CD_GPIO + * @ext_cd_gpio_invert: invert values for external CD gpio line + * @cfg_gpio: Configure the GPIO for a specific card bit-width + * + * Initialisation data specific to either the machine or the platform + * for the device driver to use or call-back when configuring gpio or + * card speed information. +*/ +struct s3c_sdhci_platdata { + unsigned int max_width; + unsigned int host_caps; + unsigned int host_caps2; + unsigned int pm_caps; + enum cd_types cd_type; + + int ext_cd_gpio; + bool ext_cd_gpio_invert; + int (*ext_cd_init)(void (*notify_func)(struct platform_device *, + int state)); + int (*ext_cd_cleanup)(void (*notify_func)(struct platform_device *, + int state)); + + void (*cfg_gpio)(struct platform_device *dev, int width); +}; + + +#endif /* __PLATFORM_DATA_SDHCI_S3C_H */ diff --git a/kernel/include/linux/platform_data/mmp_audio.h b/kernel/include/linux/platform_data/mmp_audio.h new file mode 100644 index 000000000..0f25d165a --- /dev/null +++ b/kernel/include/linux/platform_data/mmp_audio.h @@ -0,0 +1,22 @@ +/* + * MMP Platform AUDIO Management + * + * Copyright (c) 2011 Marvell Semiconductors Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef MMP_AUDIO_H +#define MMP_AUDIO_H + +struct mmp_audio_platdata { + u32 period_max_capture; + u32 buffer_max_capture; + u32 period_max_playback; + u32 buffer_max_playback; +}; + +#endif /* MMP_AUDIO_H */ diff --git a/kernel/include/linux/platform_data/mmp_dma.h b/kernel/include/linux/platform_data/mmp_dma.h new file mode 100644 index 000000000..2a330ec9e --- /dev/null +++ b/kernel/include/linux/platform_data/mmp_dma.h @@ -0,0 +1,19 @@ +/* + * MMP Platform DMA Management + * + * Copyright (c) 2011 Marvell Semiconductors Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef MMP_DMA_H +#define MMP_DMA_H + +struct mmp_dma_platdata { + int dma_channels; +}; + +#endif /* MMP_DMA_H */ diff --git a/kernel/include/linux/platform_data/mouse-pxa930_trkball.h b/kernel/include/linux/platform_data/mouse-pxa930_trkball.h new file mode 100644 index 000000000..5e0789bc4 --- /dev/null +++ b/kernel/include/linux/platform_data/mouse-pxa930_trkball.h @@ -0,0 +1,10 @@ +#ifndef __ASM_ARCH_PXA930_TRKBALL_H +#define __ASM_ARCH_PXA930_TRKBALL_H + +struct pxa930_trkball_platform_data { + int x_filter; + int y_filter; +}; + +#endif /* __ASM_ARCH_PXA930_TRKBALL_H */ + diff --git a/kernel/include/linux/platform_data/mtd-davinci-aemif.h b/kernel/include/linux/platform_data/mtd-davinci-aemif.h new file mode 100644 index 000000000..97948ac2b --- /dev/null +++ b/kernel/include/linux/platform_data/mtd-davinci-aemif.h @@ -0,0 +1,37 @@ +/* + * TI DaVinci AEMIF support + * + * Copyright 2010 (C) Texas Instruments, Inc. http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifndef _MACH_DAVINCI_AEMIF_H +#define _MACH_DAVINCI_AEMIF_H + +#include <linux/platform_device.h> + +#define NRCSR_OFFSET 0x00 +#define AWCCR_OFFSET 0x04 +#define A1CR_OFFSET 0x10 + +#define ACR_ASIZE_MASK 0x3 +#define ACR_EW_MASK BIT(30) +#define ACR_SS_MASK BIT(31) + +/* All timings in nanoseconds */ +struct davinci_aemif_timing { + u8 wsetup; + u8 wstrobe; + u8 whold; + + u8 rsetup; + u8 rstrobe; + u8 rhold; + + u8 ta; +}; + +int davinci_aemif_setup(struct platform_device *pdev); +#endif diff --git a/kernel/include/linux/platform_data/mtd-davinci.h b/kernel/include/linux/platform_data/mtd-davinci.h new file mode 100644 index 000000000..1cf555aef --- /dev/null +++ b/kernel/include/linux/platform_data/mtd-davinci.h @@ -0,0 +1,90 @@ +/* + * mach-davinci/nand.h + * + * Copyright © 2006 Texas Instruments. + * + * Ported to 2.6.23 Copyright © 2008 by + * Sander Huijsen <Shuijsen@optelecom-nkf.com> + * Troy Kisky <troy.kisky@boundarydevices.com> + * Dirk Behme <Dirk.Behme@gmail.com> + * + * -------------------------------------------------------------------------- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ARCH_ARM_DAVINCI_NAND_H +#define __ARCH_ARM_DAVINCI_NAND_H + +#include <linux/mtd/nand.h> + +#define NANDFCR_OFFSET 0x60 +#define NANDFSR_OFFSET 0x64 +#define NANDF1ECC_OFFSET 0x70 + +/* 4-bit ECC syndrome registers */ +#define NAND_4BIT_ECC_LOAD_OFFSET 0xbc +#define NAND_4BIT_ECC1_OFFSET 0xc0 +#define NAND_4BIT_ECC2_OFFSET 0xc4 +#define NAND_4BIT_ECC3_OFFSET 0xc8 +#define NAND_4BIT_ECC4_OFFSET 0xcc +#define NAND_ERR_ADD1_OFFSET 0xd0 +#define NAND_ERR_ADD2_OFFSET 0xd4 +#define NAND_ERR_ERRVAL1_OFFSET 0xd8 +#define NAND_ERR_ERRVAL2_OFFSET 0xdc + +/* NOTE: boards don't need to use these address bits + * for ALE/CLE unless they support booting from NAND. + * They're used unless platform data overrides them. + */ +#define MASK_ALE 0x08 +#define MASK_CLE 0x10 + +struct davinci_nand_pdata { /* platform_data */ + uint32_t mask_ale; + uint32_t mask_cle; + + /* for packages using two chipselects */ + uint32_t mask_chipsel; + + /* board's default static partition info */ + struct mtd_partition *parts; + unsigned nr_parts; + + /* none == NAND_ECC_NONE (strongly *not* advised!!) + * soft == NAND_ECC_SOFT + * else == NAND_ECC_HW, according to ecc_bits + * + * All DaVinci-family chips support 1-bit hardware ECC. + * Newer ones also support 4-bit ECC, but are awkward + * using it with large page chips. + */ + nand_ecc_modes_t ecc_mode; + u8 ecc_bits; + + /* e.g. NAND_BUSWIDTH_16 */ + unsigned options; + /* e.g. NAND_BBT_USE_FLASH */ + unsigned bbt_options; + + /* Main and mirror bbt descriptor overrides */ + struct nand_bbt_descr *bbt_td; + struct nand_bbt_descr *bbt_md; + + /* Access timings */ + struct davinci_aemif_timing *timing; +}; + +#endif /* __ARCH_ARM_DAVINCI_NAND_H */ diff --git a/kernel/include/linux/platform_data/mtd-mxc_nand.h b/kernel/include/linux/platform_data/mtd-mxc_nand.h new file mode 100644 index 000000000..6bb96ef16 --- /dev/null +++ b/kernel/include/linux/platform_data/mtd-mxc_nand.h @@ -0,0 +1,32 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Sascha Hauer, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_NAND_H +#define __ASM_ARCH_NAND_H + +#include <linux/mtd/partitions.h> + +struct mxc_nand_platform_data { + unsigned int width; /* data bus width in bytes */ + unsigned int hw_ecc:1; /* 0 if suppress hardware ECC */ + unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */ + struct mtd_partition *parts; /* partition table */ + int nr_parts; /* size of parts */ +}; +#endif /* __ASM_ARCH_NAND_H */ diff --git a/kernel/include/linux/platform_data/mtd-nand-omap2.h b/kernel/include/linux/platform_data/mtd-nand-omap2.h new file mode 100644 index 000000000..090bbab01 --- /dev/null +++ b/kernel/include/linux/platform_data/mtd-nand-omap2.h @@ -0,0 +1,84 @@ +/* + * Copyright (C) 2006 Micron Technology Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _MTD_NAND_OMAP2_H +#define _MTD_NAND_OMAP2_H + +#include <linux/mtd/partitions.h> + +#define GPMC_BCH_NUM_REMAINDER 8 + +enum nand_io { + NAND_OMAP_PREFETCH_POLLED = 0, /* prefetch polled mode, default */ + NAND_OMAP_POLLED, /* polled mode, without prefetch */ + NAND_OMAP_PREFETCH_DMA, /* prefetch enabled sDMA mode */ + NAND_OMAP_PREFETCH_IRQ /* prefetch enabled irq mode */ +}; + +enum omap_ecc { + /* + * 1-bit ECC: calculation and correction by SW + * ECC stored at end of spare area + */ + OMAP_ECC_HAM1_CODE_SW = 0, + + /* + * 1-bit ECC: calculation by GPMC, Error detection by Software + * ECC layout compatible with ROM code layout + */ + OMAP_ECC_HAM1_CODE_HW, + /* 4-bit ECC calculation by GPMC, Error detection by Software */ + OMAP_ECC_BCH4_CODE_HW_DETECTION_SW, + /* 4-bit ECC calculation by GPMC, Error detection by ELM */ + OMAP_ECC_BCH4_CODE_HW, + /* 8-bit ECC calculation by GPMC, Error detection by Software */ + OMAP_ECC_BCH8_CODE_HW_DETECTION_SW, + /* 8-bit ECC calculation by GPMC, Error detection by ELM */ + OMAP_ECC_BCH8_CODE_HW, + /* 16-bit ECC calculation by GPMC, Error detection by ELM */ + OMAP_ECC_BCH16_CODE_HW, +}; + +struct gpmc_nand_regs { + void __iomem *gpmc_status; + void __iomem *gpmc_nand_command; + void __iomem *gpmc_nand_address; + void __iomem *gpmc_nand_data; + void __iomem *gpmc_prefetch_config1; + void __iomem *gpmc_prefetch_config2; + void __iomem *gpmc_prefetch_control; + void __iomem *gpmc_prefetch_status; + void __iomem *gpmc_ecc_config; + void __iomem *gpmc_ecc_control; + void __iomem *gpmc_ecc_size_config; + void __iomem *gpmc_ecc1_result; + void __iomem *gpmc_bch_result0[GPMC_BCH_NUM_REMAINDER]; + void __iomem *gpmc_bch_result1[GPMC_BCH_NUM_REMAINDER]; + void __iomem *gpmc_bch_result2[GPMC_BCH_NUM_REMAINDER]; + void __iomem *gpmc_bch_result3[GPMC_BCH_NUM_REMAINDER]; + void __iomem *gpmc_bch_result4[GPMC_BCH_NUM_REMAINDER]; + void __iomem *gpmc_bch_result5[GPMC_BCH_NUM_REMAINDER]; + void __iomem *gpmc_bch_result6[GPMC_BCH_NUM_REMAINDER]; +}; + +struct omap_nand_platform_data { + int cs; + struct mtd_partition *parts; + int nr_parts; + bool dev_ready; + bool flash_bbt; + enum nand_io xfer_type; + int devsize; + enum omap_ecc ecc_opt; + struct gpmc_nand_regs reg; + + /* for passing the partitions */ + struct device_node *of_node; + struct device_node *elm_of_node; +}; +#endif diff --git a/kernel/include/linux/platform_data/mtd-nand-pxa3xx.h b/kernel/include/linux/platform_data/mtd-nand-pxa3xx.h new file mode 100644 index 000000000..ac4ea2e64 --- /dev/null +++ b/kernel/include/linux/platform_data/mtd-nand-pxa3xx.h @@ -0,0 +1,72 @@ +#ifndef __ASM_ARCH_PXA3XX_NAND_H +#define __ASM_ARCH_PXA3XX_NAND_H + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +struct pxa3xx_nand_timing { + unsigned int tCH; /* Enable signal hold time */ + unsigned int tCS; /* Enable signal setup time */ + unsigned int tWH; /* ND_nWE high duration */ + unsigned int tWP; /* ND_nWE pulse time */ + unsigned int tRH; /* ND_nRE high duration */ + unsigned int tRP; /* ND_nRE pulse width */ + unsigned int tR; /* ND_nWE high to ND_nRE low for read */ + unsigned int tWHR; /* ND_nWE high to ND_nRE low for status read */ + unsigned int tAR; /* ND_ALE low to ND_nRE low delay */ +}; + +struct pxa3xx_nand_flash { + char *name; + uint32_t chip_id; + unsigned int page_per_block; /* Pages per block (PG_PER_BLK) */ + unsigned int page_size; /* Page size in bytes (PAGE_SZ) */ + unsigned int flash_width; /* Width of Flash memory (DWIDTH_M) */ + unsigned int dfc_width; /* Width of flash controller(DWIDTH_C) */ + unsigned int num_blocks; /* Number of physical blocks in Flash */ + + struct pxa3xx_nand_timing *timing; /* NAND Flash timing */ +}; + +/* + * Current pxa3xx_nand controller has two chip select which + * both be workable. + * + * Notice should be taken that: + * When you want to use this feature, you should not enable the + * keep configuration feature, for two chip select could be + * attached with different nand chip. The different page size + * and timing requirement make the keep configuration impossible. + */ + +/* The max num of chip select current support */ +#define NUM_CHIP_SELECT (2) +struct pxa3xx_nand_platform_data { + + /* the data flash bus is shared between the Static Memory + * Controller and the Data Flash Controller, the arbiter + * controls the ownership of the bus + */ + int enable_arbiter; + + /* allow platform code to keep OBM/bootloader defined NFC config */ + int keep_config; + + /* indicate how many chip selects will be used */ + int num_cs; + + /* use an flash-based bad block table */ + bool flash_bbt; + + /* requested ECC strength and ECC step size */ + int ecc_strength, ecc_step_size; + + const struct mtd_partition *parts[NUM_CHIP_SELECT]; + unsigned int nr_parts[NUM_CHIP_SELECT]; + + const struct pxa3xx_nand_flash * flash; + size_t num_flash; +}; + +extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info); +#endif /* __ASM_ARCH_PXA3XX_NAND_H */ diff --git a/kernel/include/linux/platform_data/mtd-nand-s3c2410.h b/kernel/include/linux/platform_data/mtd-nand-s3c2410.h new file mode 100644 index 000000000..36bb92172 --- /dev/null +++ b/kernel/include/linux/platform_data/mtd-nand-s3c2410.h @@ -0,0 +1,71 @@ +/* + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - NAND device controller platform_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __MTD_NAND_S3C2410_H +#define __MTD_NAND_S3C2410_H + +/** + * struct s3c2410_nand_set - define a set of one or more nand chips + * @disable_ecc: Entirely disable ECC - Dangerous + * @flash_bbt: Openmoko u-boot can create a Bad Block Table + * Setting this flag will allow the kernel to + * look for it at boot time and also skip the NAND + * scan. + * @options: Default value to set into 'struct nand_chip' options. + * @nr_chips: Number of chips in this set + * @nr_partitions: Number of partitions pointed to by @partitions + * @name: Name of set (optional) + * @nr_map: Map for low-layer logical to physical chip numbers (option) + * @partitions: The mtd partition list + * + * define a set of one or more nand chips registered with an unique mtd. Also + * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger + * a warning at boot time. + */ +struct s3c2410_nand_set { + unsigned int disable_ecc:1; + unsigned int flash_bbt:1; + + unsigned int options; + int nr_chips; + int nr_partitions; + char *name; + int *nr_map; + struct mtd_partition *partitions; + struct nand_ecclayout *ecc_layout; +}; + +struct s3c2410_platform_nand { + /* timing information for controller, all times in nanoseconds */ + + int tacls; /* time for active CLE/ALE to nWE/nOE */ + int twrph0; /* active time for nWE/nOE */ + int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */ + + unsigned int ignore_unset_ecc:1; + + int nr_sets; + struct s3c2410_nand_set *sets; + + void (*select_chip)(struct s3c2410_nand_set *, + int chip); +}; + +/** + * s3c_nand_set_platdata() - register NAND platform data. + * @nand: The NAND platform data to register with s3c_device_nand. + * + * This function copies the given NAND platform data, @nand and registers + * it with the s3c_device_nand. This allows @nand to be __initdata. +*/ +extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand); + +#endif /*__MTD_NAND_S3C2410_H */ diff --git a/kernel/include/linux/platform_data/mtd-onenand-omap2.h b/kernel/include/linux/platform_data/mtd-onenand-omap2.h new file mode 100644 index 000000000..56ff0e6f5 --- /dev/null +++ b/kernel/include/linux/platform_data/mtd-onenand-omap2.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2006 Nokia Corporation + * Author: Juha Yrjola + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MTD_ONENAND_OMAP2_H +#define __MTD_ONENAND_OMAP2_H + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#define ONENAND_SYNC_READ (1 << 0) +#define ONENAND_SYNC_READWRITE (1 << 1) +#define ONENAND_IN_OMAP34XX (1 << 2) + +struct omap_onenand_platform_data { + int cs; + int gpio_irq; + struct mtd_partition *parts; + int nr_parts; + int (*onenand_setup)(void __iomem *, int *freq_ptr); + int dma_channel; + u8 flags; + u8 regulator_can_sleep; + u8 skip_initial_unlocking; + + /* for passing the partitions */ + struct device_node *of_node; +}; +#endif diff --git a/kernel/include/linux/platform_data/mtd-orion_nand.h b/kernel/include/linux/platform_data/mtd-orion_nand.h new file mode 100644 index 000000000..a7ce77c7c --- /dev/null +++ b/kernel/include/linux/platform_data/mtd-orion_nand.h @@ -0,0 +1,24 @@ +/* + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MTD_ORION_NAND_H +#define __MTD_ORION_NAND_H + +/* + * Device bus NAND private data + */ +struct orion_nand_data { + struct mtd_partition *parts; + int (*dev_ready)(struct mtd_info *mtd); + u32 nr_parts; + u8 ale; /* address line number connected to ALE */ + u8 cle; /* address line number connected to CLE */ + u8 width; /* buswidth */ + u8 chip_delay; +}; + + +#endif diff --git a/kernel/include/linux/platform_data/mv_usb.h b/kernel/include/linux/platform_data/mv_usb.h new file mode 100644 index 000000000..98b7925f1 --- /dev/null +++ b/kernel/include/linux/platform_data/mv_usb.h @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __MV_PLATFORM_USB_H +#define __MV_PLATFORM_USB_H + +enum pxa_ehci_type { + EHCI_UNDEFINED = 0, + PXA_U2OEHCI, /* pxa 168, 9xx */ + PXA_SPH, /* pxa 168, 9xx SPH */ + MMP3_HSIC, /* mmp3 hsic */ + MMP3_FSIC, /* mmp3 fsic */ +}; + +enum { + MV_USB_MODE_OTG, + MV_USB_MODE_HOST, +}; + +enum { + VBUS_LOW = 0, + VBUS_HIGH = 1 << 0, +}; + +struct mv_usb_addon_irq { + unsigned int irq; + int (*poll)(void); +}; + +struct mv_usb_platform_data { + struct mv_usb_addon_irq *id; /* Only valid for OTG. ID pin change*/ + struct mv_usb_addon_irq *vbus; /* valid for OTG/UDC. VBUS change*/ + + /* only valid for HCD. OTG or Host only*/ + unsigned int mode; + + /* This flag is used for that needs id pin checked by otg */ + unsigned int disable_otg_clock_gating:1; + /* Force a_bus_req to be asserted */ + unsigned int otg_force_a_bus_req:1; + + int (*phy_init)(void __iomem *regbase); + void (*phy_deinit)(void __iomem *regbase); + int (*set_vbus)(unsigned int vbus); + int (*private_init)(void __iomem *opregs, void __iomem *phyregs); +}; +#endif diff --git a/kernel/include/linux/platform_data/net-cw1200.h b/kernel/include/linux/platform_data/net-cw1200.h new file mode 100644 index 000000000..c6fbc3ce4 --- /dev/null +++ b/kernel/include/linux/platform_data/net-cw1200.h @@ -0,0 +1,81 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * Author: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com> + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef CW1200_PLAT_H_INCLUDED +#define CW1200_PLAT_H_INCLUDED + +struct cw1200_platform_data_spi { + u8 spi_bits_per_word; /* REQUIRED */ + u16 ref_clk; /* REQUIRED (in KHz) */ + + /* All others are optional */ + bool have_5ghz; + int reset; /* GPIO to RSTn signal (0 disables) */ + int powerup; /* GPIO to POWERUP signal (0 disables) */ + int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata, + bool enable); /* Control 3v3 / 1v8 supply */ + int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata, + bool enable); /* Control CLK32K */ + const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ + const char *sdd_file; /* if NULL, will use default for detected hw type */ +}; + +struct cw1200_platform_data_sdio { + u16 ref_clk; /* REQUIRED (in KHz) */ + + /* All others are optional */ + bool have_5ghz; + bool no_nptb; /* SDIO hardware does not support non-power-of-2-blocksizes */ + int reset; /* GPIO to RSTn signal (0 disables) */ + int powerup; /* GPIO to POWERUP signal (0 disables) */ + int irq; /* IRQ line or 0 to use SDIO IRQ */ + int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata, + bool enable); /* Control 3v3 / 1v8 supply */ + int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata, + bool enable); /* Control CLK32K */ + const u8 *macaddr; /* if NULL, use cw1200_mac_template module parameter */ + const char *sdd_file; /* if NULL, will use default for detected hw type */ +}; + + +/* An example of SPI support in your board setup file: + + static struct cw1200_platform_data_spi cw1200_platform_data = { + .ref_clk = 38400, + .spi_bits_per_word = 16, + .reset = GPIO_RF_RESET, + .powerup = GPIO_RF_POWERUP, + .macaddr = wifi_mac_addr, + .sdd_file = "sdd_sagrad_1091_1098.bin", + }; + static struct spi_board_info myboard_spi_devices[] __initdata = { + { + .modalias = "cw1200_wlan_spi", + .max_speed_hz = 52000000, + .bus_num = 0, + .irq = WIFI_IRQ, + .platform_data = &cw1200_platform_data, + .chip_select = 0, + }, + }; + + */ + +/* An example of SDIO support in your board setup file: + + static struct cw1200_platform_data_sdio my_cw1200_platform_data = { + .ref_clk = 38400, + .have_5ghz = false, + .sdd_file = "sdd_myplatform.bin", + }; + cw1200_sdio_set_platform_data(&my_cw1200_platform_data); + + */ + +void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata); + +#endif /* CW1200_PLAT_H_INCLUDED */ diff --git a/kernel/include/linux/platform_data/ntc_thermistor.h b/kernel/include/linux/platform_data/ntc_thermistor.h new file mode 100644 index 000000000..0a6de4ca4 --- /dev/null +++ b/kernel/include/linux/platform_data/ntc_thermistor.h @@ -0,0 +1,60 @@ +/* + * ntc_thermistor.h - NTC Thermistors + * + * Copyright (C) 2010 Samsung Electronics + * MyungJoo Ham <myungjoo.ham@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _LINUX_NTC_H +#define _LINUX_NTC_H + +struct iio_channel; + +enum ntc_thermistor_type { + TYPE_NCPXXWB473, + TYPE_NCPXXWL333, + TYPE_B57330V2103, +}; + +struct ntc_thermistor_platform_data { + /* + * One (not both) of read_uV and read_ohm should be provided and only + * one of the two should be provided. + * Both functions should return negative value for an error case. + * + * pullup_uV, pullup_ohm, pulldown_ohm, and connect are required to use + * read_uV() + * + * How to setup pullup_ohm, pulldown_ohm, and connect is + * described at Documentation/hwmon/ntc_thermistor + * + * pullup/down_ohm: 0 for infinite / not-connected + * + * chan: iio_channel pointer to communicate with the ADC which the + * thermistor is using for conversion of the analog values. + */ + int (*read_uv)(struct ntc_thermistor_platform_data *); + unsigned int pullup_uv; + + unsigned int pullup_ohm; + unsigned int pulldown_ohm; + enum { NTC_CONNECTED_POSITIVE, NTC_CONNECTED_GROUND } connect; + struct iio_channel *chan; + + int (*read_ohm)(void); +}; + +#endif /* _LINUX_NTC_H */ diff --git a/kernel/include/linux/platform_data/nxp-nci.h b/kernel/include/linux/platform_data/nxp-nci.h new file mode 100644 index 000000000..d6ed28679 --- /dev/null +++ b/kernel/include/linux/platform_data/nxp-nci.h @@ -0,0 +1,27 @@ +/* + * Generic platform data for the NXP NCI NFC chips. + * + * Copyright (C) 2014 NXP Semiconductors All rights reserved. + * + * Authors: Clément Perrochaud <clement.perrochaud@nxp.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _NXP_NCI_H_ +#define _NXP_NCI_H_ + +struct nxp_nci_nfc_platform_data { + unsigned int gpio_en; + unsigned int gpio_fw; + unsigned int irq; +}; + +#endif /* _NXP_NCI_H_ */ diff --git a/kernel/include/linux/platform_data/omap-twl4030.h b/kernel/include/linux/platform_data/omap-twl4030.h new file mode 100644 index 000000000..ee60ef79d --- /dev/null +++ b/kernel/include/linux/platform_data/omap-twl4030.h @@ -0,0 +1,58 @@ +/** + * omap-twl4030.h - ASoC machine driver for TI SoC based boards with twl4030 + * codec, header. + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Author: Peter Ujfalusi <peter.ujfalusi@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef _OMAP_TWL4030_H_ +#define _OMAP_TWL4030_H_ + +/* To select if only one channel is connected in a stereo port */ +#define OMAP_TWL4030_LEFT (1 << 0) +#define OMAP_TWL4030_RIGHT (1 << 1) + +struct omap_tw4030_pdata { + const char *card_name; + /* Voice port is connected to McBSP3 */ + bool voice_connected; + + /* The driver will parse the connection flags if this flag is set */ + bool custom_routing; + /* Flags to indicate connected audio ports. */ + u8 has_hs; + u8 has_hf; + u8 has_predriv; + u8 has_carkit; + bool has_ear; + + bool has_mainmic; + bool has_submic; + bool has_hsmic; + bool has_carkitmic; + bool has_digimic0; + bool has_digimic1; + u8 has_linein; + + /* Jack detect GPIO or <= 0 if it is not implemented */ + int jack_detect; +}; + +#endif /* _OMAP_TWL4030_H_ */ diff --git a/kernel/include/linux/platform_data/omap-wd-timer.h b/kernel/include/linux/platform_data/omap-wd-timer.h new file mode 100644 index 000000000..d75f5f802 --- /dev/null +++ b/kernel/include/linux/platform_data/omap-wd-timer.h @@ -0,0 +1,38 @@ +/* + * OMAP2+ WDTIMER-specific function prototypes + * + * Copyright (C) 2012 Texas Instruments, Inc. + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __LINUX_PLATFORM_DATA_OMAP_WD_TIMER_H +#define __LINUX_PLATFORM_DATA_OMAP_WD_TIMER_H + +#include <linux/types.h> + +/* + * Standardized OMAP reset source bits + * + * This is a subset of the ones listed in arch/arm/mach-omap2/prm.h + * and are the only ones needed in the watchdog driver. + */ +#define OMAP_MPU_WD_RST_SRC_ID_SHIFT 3 + +/** + * struct omap_wd_timer_platform_data - WDTIMER integration to the host SoC + * @read_reset_sources - fn ptr for the SoC to indicate the last reset cause + * + * The function pointed to by @read_reset_sources must return its data + * in a standard format - search for RST_SRC_ID_SHIFT in + * arch/arm/mach-omap2 + */ +struct omap_wd_timer_platform_data { + u32 (*read_reset_sources)(void); +}; + +#endif diff --git a/kernel/include/linux/platform_data/omap1_bl.h b/kernel/include/linux/platform_data/omap1_bl.h new file mode 100644 index 000000000..881a8e92d --- /dev/null +++ b/kernel/include/linux/platform_data/omap1_bl.h @@ -0,0 +1,11 @@ +#ifndef __OMAP1_BL_H__ +#define __OMAP1_BL_H__ + +#include <linux/device.h> + +struct omap_backlight_config { + int default_intensity; + int (*set_power)(struct device *dev, int state); +}; + +#endif diff --git a/kernel/include/linux/platform_data/omap_drm.h b/kernel/include/linux/platform_data/omap_drm.h new file mode 100644 index 000000000..f4e4a237e --- /dev/null +++ b/kernel/include/linux/platform_data/omap_drm.h @@ -0,0 +1,53 @@ +/* + * DRM/KMS platform data for TI OMAP platforms + * + * Copyright (C) 2012 Texas Instruments + * Author: Rob Clark <rob.clark@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __PLATFORM_DATA_OMAP_DRM_H__ +#define __PLATFORM_DATA_OMAP_DRM_H__ + +/* + * Optional platform data to configure the default configuration of which + * pipes/overlays/CRTCs are used.. if this is not provided, then instead the + * first CONFIG_DRM_OMAP_NUM_CRTCS are used, and they are each connected to + * one manager, with priority given to managers that are connected to + * detected devices. Remaining overlays are used as video planes. This + * should be a good default behavior for most cases, but yet there still + * might be times when you wish to do something different. + */ +struct omap_kms_platform_data { + /* overlays to use as CRTCs: */ + int ovl_cnt; + const int *ovl_ids; + + /* overlays to use as video planes: */ + int pln_cnt; + const int *pln_ids; + + int mgr_cnt; + const int *mgr_ids; + + int dev_cnt; + const char **dev_names; +}; + +struct omap_drm_platform_data { + uint32_t omaprev; + struct omap_kms_platform_data *kms_pdata; +}; + +#endif /* __PLATFORM_DATA_OMAP_DRM_H__ */ diff --git a/kernel/include/linux/platform_data/pca953x.h b/kernel/include/linux/platform_data/pca953x.h new file mode 100644 index 000000000..3c98dd4f9 --- /dev/null +++ b/kernel/include/linux/platform_data/pca953x.h @@ -0,0 +1,30 @@ +#ifndef _LINUX_PCA953X_H +#define _LINUX_PCA953X_H + +#include <linux/types.h> +#include <linux/i2c.h> + +/* platform data for the PCA9539 16-bit I/O expander driver */ + +struct pca953x_platform_data { + /* number of the first GPIO */ + unsigned gpio_base; + + /* initial polarity inversion setting */ + u32 invert; + + /* interrupt base */ + int irq_base; + + void *context; /* param to setup/teardown */ + + int (*setup)(struct i2c_client *client, + unsigned gpio, unsigned ngpio, + void *context); + int (*teardown)(struct i2c_client *client, + unsigned gpio, unsigned ngpio, + void *context); + const char *const *names; +}; + +#endif /* _LINUX_PCA953X_H */ diff --git a/kernel/include/linux/platform_data/pcmcia-pxa2xx_viper.h b/kernel/include/linux/platform_data/pcmcia-pxa2xx_viper.h new file mode 100644 index 000000000..d428be4db --- /dev/null +++ b/kernel/include/linux/platform_data/pcmcia-pxa2xx_viper.h @@ -0,0 +1,11 @@ +#ifndef __ARCOM_PCMCIA_H +#define __ARCOM_PCMCIA_H + +struct arcom_pcmcia_pdata { + int cd_gpio; + int rdy_gpio; + int pwr_gpio; + void (*reset)(int state); +}; + +#endif diff --git a/kernel/include/linux/platform_data/pinctrl-adi2.h b/kernel/include/linux/platform_data/pinctrl-adi2.h new file mode 100644 index 000000000..8f9130061 --- /dev/null +++ b/kernel/include/linux/platform_data/pinctrl-adi2.h @@ -0,0 +1,40 @@ +/* + * Pinctrl Driver for ADI GPIO2 controller + * + * Copyright 2007-2013 Analog Devices Inc. + * + * Licensed under the GPLv2 or later + */ + + +#ifndef PINCTRL_ADI2_H +#define PINCTRL_ADI2_H + +#include <linux/io.h> +#include <linux/platform_device.h> + +/** + * struct adi_pinctrl_gpio_platform_data - Pinctrl gpio platform data + * for ADI GPIO2 device. + * + * @port_gpio_base: Optional global GPIO index of the GPIO bank. + * 0 means driver decides. + * @port_pin_base: Pin index of the pin controller device. + * @port_width: PIN number of the GPIO bank device + * @pint_id: GPIO PINT device id that this GPIO bank should map to. + * @pint_assign: The 32-bit GPIO PINT registers can be divided into 2 parts. A + * GPIO bank can be mapped into either low 16 bits[0] or high 16 + * bits[1] of each PINT register. + * @pint_map: GIOP bank mapping code in PINT device + */ +struct adi_pinctrl_gpio_platform_data { + unsigned int port_gpio_base; + unsigned int port_pin_base; + unsigned int port_width; + u8 pinctrl_id; + u8 pint_id; + bool pint_assign; + u8 pint_map; +}; + +#endif diff --git a/kernel/include/linux/platform_data/pinctrl-single.h b/kernel/include/linux/platform_data/pinctrl-single.h new file mode 100644 index 000000000..72eacda9b --- /dev/null +++ b/kernel/include/linux/platform_data/pinctrl-single.h @@ -0,0 +1,12 @@ +/** + * irq: optional wake-up interrupt + * rearm: optional soc specific rearm function + * + * Note that the irq and rearm setup should come from device + * tree except for omap where there are still some dependencies + * to the legacy PRM code. + */ +struct pcs_pdata { + int irq; + void (*rearm)(void); +}; diff --git a/kernel/include/linux/platform_data/pn544.h b/kernel/include/linux/platform_data/pn544.h new file mode 100644 index 000000000..5ce1ab983 --- /dev/null +++ b/kernel/include/linux/platform_data/pn544.h @@ -0,0 +1,43 @@ +/* + * Driver include for the PN544 NFC chip. + * + * Copyright (C) Nokia Corporation + * + * Author: Jari Vanhala <ext-jari.vanhala@nokia.com> + * Contact: Matti Aaltoenn <matti.j.aaltonen@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _PN544_H_ +#define _PN544_H_ + +#include <linux/i2c.h> + +enum { + NFC_GPIO_ENABLE, + NFC_GPIO_FW_RESET, + NFC_GPIO_IRQ +}; + +/* board config */ +struct pn544_nfc_platform_data { + int (*request_resources) (struct i2c_client *client); + void (*free_resources) (void); + void (*enable) (int fw); + int (*test) (void); + void (*disable) (void); + int (*get_gpio)(int type); +}; + +#endif /* _PN544_H_ */ diff --git a/kernel/include/linux/platform_data/pxa2xx_udc.h b/kernel/include/linux/platform_data/pxa2xx_udc.h new file mode 100644 index 000000000..c6c5e98b5 --- /dev/null +++ b/kernel/include/linux/platform_data/pxa2xx_udc.h @@ -0,0 +1,27 @@ +/* + * This supports machine-specific differences in how the PXA2xx + * USB Device Controller (UDC) is wired. + * + * It is set in linux/arch/arm/mach-pxa/<machine>.c or in + * linux/arch/mach-ixp4xx/<machine>.c and used in + * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c + */ +#ifndef PXA2XX_UDC_H +#define PXA2XX_UDC_H + +struct pxa2xx_udc_mach_info { + int (*udc_is_connected)(void); /* do we see host? */ + void (*udc_command)(int cmd); +#define PXA2XX_UDC_CMD_CONNECT 0 /* let host see us */ +#define PXA2XX_UDC_CMD_DISCONNECT 1 /* so host won't see us */ + + /* Boards following the design guidelines in the developer's manual, + * with on-chip GPIOs not Lubbock's weird hardware, can have a sane + * VBUS IRQ and omit the methods above. Store the GPIO number + * here. Note that sometimes the signals go through inverters... + */ + bool gpio_pullup_inverted; + int gpio_pullup; /* high == pullup activated */ +}; + +#endif diff --git a/kernel/include/linux/platform_data/pxa_sdhci.h b/kernel/include/linux/platform_data/pxa_sdhci.h new file mode 100644 index 000000000..9e20c2fb4 --- /dev/null +++ b/kernel/include/linux/platform_data/pxa_sdhci.h @@ -0,0 +1,58 @@ +/* + * include/linux/platform_data/pxa_sdhci.h + * + * Copyright 2010 Marvell + * Zhangfei Gao <zhangfei.gao@marvell.com> + * + * PXA Platform - SDHCI platform data definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _PXA_SDHCI_H_ +#define _PXA_SDHCI_H_ + +/* pxa specific flag */ +/* Require clock free running */ +#define PXA_FLAG_ENABLE_CLOCK_GATING (1<<0) +/* card always wired to host, like on-chip emmc */ +#define PXA_FLAG_CARD_PERMANENT (1<<1) +/* Board design supports 8-bit data on SD/SDIO BUS */ +#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2) + +/* + * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI + * @flags: flags for platform requirement + * @clk_delay_cycles: + * mmp2: each step is roughly 100ps, 5bits width + * pxa910: each step is 1ns, 4bits width + * @clk_delay_sel: select clk_delay, used on pxa910 + * 0: choose feedback clk + * 1: choose feedback clk + delay value + * 2: choose internal clk + * @clk_delay_enable: enable clk_delay or not, used on pxa910 + * @ext_cd_gpio: gpio pin used for external CD line + * @ext_cd_gpio_invert: invert values for external CD gpio line + * @max_speed: the maximum speed supported + * @host_caps: Standard MMC host capabilities bit field. + * @quirks: quirks of platfrom + * @quirks2: quirks2 of platfrom + * @pm_caps: pm_caps of platfrom + */ +struct sdhci_pxa_platdata { + unsigned int flags; + unsigned int clk_delay_cycles; + unsigned int clk_delay_sel; + bool clk_delay_enable; + unsigned int ext_cd_gpio; + bool ext_cd_gpio_invert; + unsigned int max_speed; + u32 host_caps; + u32 host_caps2; + unsigned int quirks; + unsigned int quirks2; + unsigned int pm_caps; +}; +#endif /* _PXA_SDHCI_H_ */ diff --git a/kernel/include/linux/platform_data/regulator-haptic.h b/kernel/include/linux/platform_data/regulator-haptic.h new file mode 100644 index 000000000..5658e58e0 --- /dev/null +++ b/kernel/include/linux/platform_data/regulator-haptic.h @@ -0,0 +1,29 @@ +/* + * Regulator Haptic Platform Data + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * Author: Jaewon Kim <jaewon02.kim@samsung.com> + * Author: Hyunhee Kim <hyunhee.kim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _REGULATOR_HAPTIC_H +#define _REGULATOR_HAPTIC_H + +/* + * struct regulator_haptic_data - Platform device data + * + * @max_volt: maximum voltage value supplied to the haptic motor. + * <The unit of the voltage is a micro> + * @min_volt: minimum voltage value supplied to the haptic motor. + * <The unit of the voltage is a micro> + */ +struct regulator_haptic_data { + unsigned int max_volt; + unsigned int min_volt; +}; + +#endif /* _REGULATOR_HAPTIC_H */ diff --git a/kernel/include/linux/platform_data/remoteproc-omap.h b/kernel/include/linux/platform_data/remoteproc-omap.h new file mode 100644 index 000000000..bfbd12b41 --- /dev/null +++ b/kernel/include/linux/platform_data/remoteproc-omap.h @@ -0,0 +1,59 @@ +/* + * Remote Processor - omap-specific bits + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011 Google, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _PLAT_REMOTEPROC_H +#define _PLAT_REMOTEPROC_H + +struct rproc_ops; +struct platform_device; + +/* + * struct omap_rproc_pdata - omap remoteproc's platform data + * @name: the remoteproc's name + * @oh_name: omap hwmod device + * @oh_name_opt: optional, secondary omap hwmod device + * @firmware: name of firmware file to load + * @mbox_name: name of omap mailbox device to use with this rproc + * @ops: start/stop rproc handlers + * @device_enable: omap-specific handler for enabling a device + * @device_shutdown: omap-specific handler for shutting down a device + * @set_bootaddr: omap-specific handler for setting the rproc boot address + */ +struct omap_rproc_pdata { + const char *name; + const char *oh_name; + const char *oh_name_opt; + const char *firmware; + const char *mbox_name; + const struct rproc_ops *ops; + int (*device_enable) (struct platform_device *pdev); + int (*device_shutdown) (struct platform_device *pdev); + void(*set_bootaddr)(u32); +}; + +#if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE) + +void __init omap_rproc_reserve_cma(void); + +#else + +static inline void __init omap_rproc_reserve_cma(void) +{ +} + +#endif + +#endif /* _PLAT_REMOTEPROC_H */ diff --git a/kernel/include/linux/platform_data/s3c-hsotg.h b/kernel/include/linux/platform_data/s3c-hsotg.h new file mode 100644 index 000000000..3f1cbf95e --- /dev/null +++ b/kernel/include/linux/platform_data/s3c-hsotg.h @@ -0,0 +1,42 @@ +/* include/linux/platform_data/s3c-hsotg.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C USB2.0 High-speed / OtG platform information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __LINUX_USB_S3C_HSOTG_H +#define __LINUX_USB_S3C_HSOTG_H + +struct platform_device; + +enum s3c_hsotg_dmamode { + S3C_HSOTG_DMA_NONE, /* do not use DMA at-all */ + S3C_HSOTG_DMA_ONLY, /* always use DMA */ + S3C_HSOTG_DMA_DRV, /* DMA is chosen by driver */ +}; + +/** + * struct s3c_hsotg_plat - platform data for high-speed otg/udc + * @dma: Whether to use DMA or not. + * @is_osc: The clock source is an oscillator, not a crystal + */ +struct s3c_hsotg_plat { + enum s3c_hsotg_dmamode dma; + unsigned int is_osc:1; + int phy_type; + + int (*phy_init)(struct platform_device *pdev, int type); + int (*phy_exit)(struct platform_device *pdev, int type); +}; + +extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd); + +#endif /* __LINUX_USB_S3C_HSOTG_H */ diff --git a/kernel/include/linux/platform_data/s3c-hsudc.h b/kernel/include/linux/platform_data/s3c-hsudc.h new file mode 100644 index 000000000..6fa109339 --- /dev/null +++ b/kernel/include/linux/platform_data/s3c-hsudc.h @@ -0,0 +1,34 @@ +/* + * S3C24XX USB 2.0 High-speed USB controller gadget driver + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints. + * Each endpoint can be configured as either in or out endpoint. Endpoints + * can be configured for Bulk or Interrupt transfer mode. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __LINUX_USB_S3C_HSUDC_H +#define __LINUX_USB_S3C_HSUDC_H + +/** + * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller. + * @epnum: Number of endpoints to be instantiated by the controller driver. + * @gpio_init: Platform specific USB related GPIO initialization. + * @gpio_uninit: Platform specific USB releted GPIO uninitialzation. + * + * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget + * controllers. + */ +struct s3c24xx_hsudc_platdata { + unsigned int epnum; + void (*gpio_init)(void); + void (*gpio_uninit)(void); +}; + +#endif /* __LINUX_USB_S3C_HSUDC_H */ diff --git a/kernel/include/linux/platform_data/sa11x0-serial.h b/kernel/include/linux/platform_data/sa11x0-serial.h new file mode 100644 index 000000000..4504d5d59 --- /dev/null +++ b/kernel/include/linux/platform_data/sa11x0-serial.h @@ -0,0 +1,33 @@ +/* + * Author: Nicolas Pitre + * + * Moved and changed lots, Russell King + * + * Low level machine dependent UART functions. + */ +#ifndef SA11X0_SERIAL_H +#define SA11X0_SERIAL_H + +struct uart_port; +struct uart_info; + +/* + * This is a temporary structure for registering these + * functions; it is intended to be discarded after boot. + */ +struct sa1100_port_fns { + void (*set_mctrl)(struct uart_port *, u_int); + u_int (*get_mctrl)(struct uart_port *); + void (*pm)(struct uart_port *, u_int, u_int); + int (*set_wake)(struct uart_port *, u_int); +}; + +#ifdef CONFIG_SERIAL_SA1100 +void sa1100_register_uart_fns(struct sa1100_port_fns *fns); +void sa1100_register_uart(int idx, int port); +#else +#define sa1100_register_uart_fns(fns) do { } while (0) +#define sa1100_register_uart(idx,port) do { } while (0) +#endif + +#endif diff --git a/kernel/include/linux/platform_data/sc18is602.h b/kernel/include/linux/platform_data/sc18is602.h new file mode 100644 index 000000000..997b06634 --- /dev/null +++ b/kernel/include/linux/platform_data/sc18is602.h @@ -0,0 +1,19 @@ +/* + * Platform data for NXP SC18IS602/603 + * + * Copyright (C) 2012 Guenter Roeck <linux@roeck-us.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * For further information, see the Documentation/spi/sc18is602 file. + */ + +/** + * struct sc18is602_platform_data - sc18is602 info + * @clock_frequency SC18IS603 oscillator frequency + */ +struct sc18is602_platform_data { + u32 clock_frequency; +}; diff --git a/kernel/include/linux/platform_data/serial-imx.h b/kernel/include/linux/platform_data/serial-imx.h new file mode 100644 index 000000000..a938eba2f --- /dev/null +++ b/kernel/include/linux/platform_data/serial-imx.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef ASMARM_ARCH_UART_H +#define ASMARM_ARCH_UART_H + +#define IMXUART_HAVE_RTSCTS (1<<0) + +struct imxuart_platform_data { + unsigned int flags; +}; + +#endif diff --git a/kernel/include/linux/platform_data/serial-omap.h b/kernel/include/linux/platform_data/serial-omap.h new file mode 100644 index 000000000..d09275f3c --- /dev/null +++ b/kernel/include/linux/platform_data/serial-omap.h @@ -0,0 +1,46 @@ +/* + * Driver for OMAP-UART controller. + * Based on drivers/serial/8250.c + * + * Copyright (C) 2010 Texas Instruments. + * + * Authors: + * Govindraj R <govindraj.raja@ti.com> + * Thara Gopinath <thara@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __OMAP_SERIAL_H__ +#define __OMAP_SERIAL_H__ + +#include <linux/serial_core.h> +#include <linux/device.h> +#include <linux/pm_qos.h> + +#define DRIVER_NAME "omap_uart" + +/* + * Use tty device name as ttyO, [O -> OMAP] + * in bootargs we specify as console=ttyO0 if uart1 + * is used as console uart. + */ +#define OMAP_SERIAL_NAME "ttyO" + +struct omap_uart_port_info { + bool dma_enabled; /* To specify DMA Mode */ + unsigned int uartclk; /* UART clock rate */ + upf_t flags; /* UPF_* flags */ + unsigned int dma_rx_buf_size; + unsigned int dma_rx_timeout; + unsigned int autosuspend_timeout; + unsigned int dma_rx_poll_rate; + + int (*get_context_loss_count)(struct device *); + void (*enable_wakeup)(struct device *, bool); +}; + +#endif /* __OMAP_SERIAL_H__ */ diff --git a/kernel/include/linux/platform_data/serial-sccnxp.h b/kernel/include/linux/platform_data/serial-sccnxp.h new file mode 100644 index 000000000..af0c8c3b8 --- /dev/null +++ b/kernel/include/linux/platform_data/serial-sccnxp.h @@ -0,0 +1,88 @@ +/* + * NXP (Philips) SCC+++(SCN+++) serial driver + * + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> + * + * Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _PLATFORM_DATA_SERIAL_SCCNXP_H_ +#define _PLATFORM_DATA_SERIAL_SCCNXP_H_ + +#define SCCNXP_MAX_UARTS 2 + +/* Output lines */ +#define LINE_OP0 1 +#define LINE_OP1 2 +#define LINE_OP2 3 +#define LINE_OP3 4 +#define LINE_OP4 5 +#define LINE_OP5 6 +#define LINE_OP6 7 +#define LINE_OP7 8 + +/* Input lines */ +#define LINE_IP0 9 +#define LINE_IP1 10 +#define LINE_IP2 11 +#define LINE_IP3 12 +#define LINE_IP4 13 +#define LINE_IP5 14 +#define LINE_IP6 15 + +/* Signals */ +#define DTR_OP 0 /* DTR */ +#define RTS_OP 4 /* RTS */ +#define DSR_IP 8 /* DSR */ +#define CTS_IP 12 /* CTS */ +#define DCD_IP 16 /* DCD */ +#define RNG_IP 20 /* RNG */ + +#define DIR_OP 24 /* Special signal for control RS-485. + * Goes high when transmit, + * then goes low. + */ + +/* Routing control signal 'sig' to line 'line' */ +#define MCTRL_SIG(sig, line) ((line) << (sig)) + +/* + * Example board initialization data: + * + * static struct resource sc2892_resources[] = { + * DEFINE_RES_MEM(UART_PHYS_START, 0x10), + * DEFINE_RES_IRQ(IRQ_EXT2), + * }; + * + * static struct sccnxp_pdata sc2892_info = { + * .mctrl_cfg[0] = MCTRL_SIG(DIR_OP, LINE_OP0), + * .mctrl_cfg[1] = MCTRL_SIG(DIR_OP, LINE_OP1), + * }; + * + * static struct platform_device sc2892 = { + * .name = "sc2892", + * .id = -1, + * .resource = sc2892_resources, + * .num_resources = ARRAY_SIZE(sc2892_resources), + * .dev = { + * .platform_data = &sc2892_info, + * }, + * }; + */ + +/* SCCNXP platform data structure */ +struct sccnxp_pdata { + /* Shift for A0 line */ + const u8 reg_shift; + /* Modem control lines configuration */ + const u32 mctrl_cfg[SCCNXP_MAX_UARTS]; + /* Timer value for polling mode (usecs) */ + const unsigned int poll_time_us; +}; + +#endif diff --git a/kernel/include/linux/platform_data/sh_ipmmu.h b/kernel/include/linux/platform_data/sh_ipmmu.h new file mode 100644 index 000000000..39f7405cd --- /dev/null +++ b/kernel/include/linux/platform_data/sh_ipmmu.h @@ -0,0 +1,18 @@ +/* sh_ipmmu.h + * + * Copyright (C) 2012 Hideki EIRAKU + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#ifndef __SH_IPMMU_H__ +#define __SH_IPMMU_H__ + +struct shmobile_ipmmu_platform_data { + const char * const *dev_names; + unsigned int num_dev_names; +}; + +#endif /* __SH_IPMMU_H__ */ diff --git a/kernel/include/linux/platform_data/shmob_drm.h b/kernel/include/linux/platform_data/shmob_drm.h new file mode 100644 index 000000000..7c686d335 --- /dev/null +++ b/kernel/include/linux/platform_data/shmob_drm.h @@ -0,0 +1,99 @@ +/* + * shmob_drm.h -- SH Mobile DRM driver + * + * Copyright (C) 2012 Renesas Corporation + * + * Laurent Pinchart (laurent.pinchart@ideasonboard.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __SHMOB_DRM_H__ +#define __SHMOB_DRM_H__ + +#include <linux/kernel.h> + +#include <drm/drm_mode.h> + +struct sh_mobile_meram_cfg; +struct sh_mobile_meram_info; + +enum shmob_drm_clk_source { + SHMOB_DRM_CLK_BUS, + SHMOB_DRM_CLK_PERIPHERAL, + SHMOB_DRM_CLK_EXTERNAL, +}; + +enum shmob_drm_interface { + SHMOB_DRM_IFACE_RGB8, /* 24bpp, 8:8:8 */ + SHMOB_DRM_IFACE_RGB9, /* 18bpp, 9:9 */ + SHMOB_DRM_IFACE_RGB12A, /* 24bpp, 12:12 */ + SHMOB_DRM_IFACE_RGB12B, /* 12bpp */ + SHMOB_DRM_IFACE_RGB16, /* 16bpp */ + SHMOB_DRM_IFACE_RGB18, /* 18bpp */ + SHMOB_DRM_IFACE_RGB24, /* 24bpp */ + SHMOB_DRM_IFACE_YUV422, /* 16bpp */ + SHMOB_DRM_IFACE_SYS8A, /* 24bpp, 8:8:8 */ + SHMOB_DRM_IFACE_SYS8B, /* 18bpp, 8:8:2 */ + SHMOB_DRM_IFACE_SYS8C, /* 18bpp, 2:8:8 */ + SHMOB_DRM_IFACE_SYS8D, /* 16bpp, 8:8 */ + SHMOB_DRM_IFACE_SYS9, /* 18bpp, 9:9 */ + SHMOB_DRM_IFACE_SYS12, /* 24bpp, 12:12 */ + SHMOB_DRM_IFACE_SYS16A, /* 16bpp */ + SHMOB_DRM_IFACE_SYS16B, /* 18bpp, 16:2 */ + SHMOB_DRM_IFACE_SYS16C, /* 18bpp, 2:16 */ + SHMOB_DRM_IFACE_SYS18, /* 18bpp */ + SHMOB_DRM_IFACE_SYS24, /* 24bpp */ +}; + +struct shmob_drm_backlight_data { + const char *name; + int max_brightness; + int (*get_brightness)(void); + int (*set_brightness)(int brightness); +}; + +struct shmob_drm_panel_data { + unsigned int width_mm; /* Panel width in mm */ + unsigned int height_mm; /* Panel height in mm */ + struct drm_mode_modeinfo mode; +}; + +struct shmob_drm_sys_interface_data { + unsigned int read_latch:6; + unsigned int read_setup:8; + unsigned int read_cycle:8; + unsigned int read_strobe:8; + unsigned int write_setup:8; + unsigned int write_cycle:8; + unsigned int write_strobe:8; + unsigned int cs_setup:3; + unsigned int vsync_active_high:1; + unsigned int vsync_dir_input:1; +}; + +#define SHMOB_DRM_IFACE_FL_DWPOL (1 << 0) /* Rising edge dot clock data latch */ +#define SHMOB_DRM_IFACE_FL_DIPOL (1 << 1) /* Active low display enable */ +#define SHMOB_DRM_IFACE_FL_DAPOL (1 << 2) /* Active low display data */ +#define SHMOB_DRM_IFACE_FL_HSCNT (1 << 3) /* Disable HSYNC during VBLANK */ +#define SHMOB_DRM_IFACE_FL_DWCNT (1 << 4) /* Disable dotclock during blanking */ + +struct shmob_drm_interface_data { + enum shmob_drm_interface interface; + struct shmob_drm_sys_interface_data sys; + unsigned int clk_div; + unsigned int flags; +}; + +struct shmob_drm_platform_data { + enum shmob_drm_clk_source clk_source; + struct shmob_drm_interface_data iface; + struct shmob_drm_panel_data panel; + struct shmob_drm_backlight_data backlight; + const struct sh_mobile_meram_cfg *meram; +}; + +#endif /* __SHMOB_DRM_H__ */ diff --git a/kernel/include/linux/platform_data/sht15.h b/kernel/include/linux/platform_data/sht15.h new file mode 100644 index 000000000..12289c1e9 --- /dev/null +++ b/kernel/include/linux/platform_data/sht15.h @@ -0,0 +1,38 @@ +/* + * sht15.h - support for the SHT15 Temperature and Humidity Sensor + * + * Copyright (c) 2009 Jonathan Cameron + * + * Copyright (c) 2007 Wouter Horre + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * For further information, see the Documentation/hwmon/sht15 file. + */ + +#ifndef _PDATA_SHT15_H +#define _PDATA_SHT15_H + +/** + * struct sht15_platform_data - sht15 connectivity info + * @gpio_data: no. of gpio to which bidirectional data line is + * connected. + * @gpio_sck: no. of gpio to which the data clock is connected. + * @supply_mv: supply voltage in mv. Overridden by regulator if + * available. + * @checksum: flag to indicate the checksum should be validated. + * @no_otp_reload: flag to indicate no reload from OTP. + * @low_resolution: flag to indicate the temp/humidity resolution to use. + */ +struct sht15_platform_data { + int gpio_data; + int gpio_sck; + int supply_mv; + bool checksum; + bool no_otp_reload; + bool low_resolution; +}; + +#endif /* _PDATA_SHT15_H */ diff --git a/kernel/include/linux/platform_data/shtc1.h b/kernel/include/linux/platform_data/shtc1.h new file mode 100644 index 000000000..7b8c353f7 --- /dev/null +++ b/kernel/include/linux/platform_data/shtc1.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2014 Sensirion AG, Switzerland + * Author: Johannes Winkelmann <johannes.winkelmann@sensirion.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __SHTC1_H_ +#define __SHTC1_H_ + +struct shtc1_platform_data { + bool blocking_io; + bool high_precision; +}; +#endif /* __SHTC1_H_ */ diff --git a/kernel/include/linux/platform_data/si5351.h b/kernel/include/linux/platform_data/si5351.h new file mode 100644 index 000000000..533d9807e --- /dev/null +++ b/kernel/include/linux/platform_data/si5351.h @@ -0,0 +1,112 @@ +/* + * Si5351A/B/C programmable clock generator platform_data. + */ + +#ifndef __LINUX_PLATFORM_DATA_SI5351_H__ +#define __LINUX_PLATFORM_DATA_SI5351_H__ + +/** + * enum si5351_pll_src - Si5351 pll clock source + * @SI5351_PLL_SRC_DEFAULT: default, do not change eeprom config + * @SI5351_PLL_SRC_XTAL: pll source clock is XTAL input + * @SI5351_PLL_SRC_CLKIN: pll source clock is CLKIN input (Si5351C only) + */ +enum si5351_pll_src { + SI5351_PLL_SRC_DEFAULT = 0, + SI5351_PLL_SRC_XTAL = 1, + SI5351_PLL_SRC_CLKIN = 2, +}; + +/** + * enum si5351_multisynth_src - Si5351 multisynth clock source + * @SI5351_MULTISYNTH_SRC_DEFAULT: default, do not change eeprom config + * @SI5351_MULTISYNTH_SRC_VCO0: multisynth source clock is VCO0 + * @SI5351_MULTISYNTH_SRC_VCO1: multisynth source clock is VCO1/VXCO + */ +enum si5351_multisynth_src { + SI5351_MULTISYNTH_SRC_DEFAULT = 0, + SI5351_MULTISYNTH_SRC_VCO0 = 1, + SI5351_MULTISYNTH_SRC_VCO1 = 2, +}; + +/** + * enum si5351_clkout_src - Si5351 clock output clock source + * @SI5351_CLKOUT_SRC_DEFAULT: default, do not change eeprom config + * @SI5351_CLKOUT_SRC_MSYNTH_N: clkout N source clock is multisynth N + * @SI5351_CLKOUT_SRC_MSYNTH_0_4: clkout N source clock is multisynth 0 (N<4) + * or 4 (N>=4) + * @SI5351_CLKOUT_SRC_XTAL: clkout N source clock is XTAL + * @SI5351_CLKOUT_SRC_CLKIN: clkout N source clock is CLKIN (Si5351C only) + */ +enum si5351_clkout_src { + SI5351_CLKOUT_SRC_DEFAULT = 0, + SI5351_CLKOUT_SRC_MSYNTH_N = 1, + SI5351_CLKOUT_SRC_MSYNTH_0_4 = 2, + SI5351_CLKOUT_SRC_XTAL = 3, + SI5351_CLKOUT_SRC_CLKIN = 4, +}; + +/** + * enum si5351_drive_strength - Si5351 clock output drive strength + * @SI5351_DRIVE_DEFAULT: default, do not change eeprom config + * @SI5351_DRIVE_2MA: 2mA clock output drive strength + * @SI5351_DRIVE_4MA: 4mA clock output drive strength + * @SI5351_DRIVE_6MA: 6mA clock output drive strength + * @SI5351_DRIVE_8MA: 8mA clock output drive strength + */ +enum si5351_drive_strength { + SI5351_DRIVE_DEFAULT = 0, + SI5351_DRIVE_2MA = 2, + SI5351_DRIVE_4MA = 4, + SI5351_DRIVE_6MA = 6, + SI5351_DRIVE_8MA = 8, +}; + +/** + * enum si5351_disable_state - Si5351 clock output disable state + * @SI5351_DISABLE_DEFAULT: default, do not change eeprom config + * @SI5351_DISABLE_LOW: CLKx is set to a LOW state when disabled + * @SI5351_DISABLE_HIGH: CLKx is set to a HIGH state when disabled + * @SI5351_DISABLE_FLOATING: CLKx is set to a FLOATING state when + * disabled + * @SI5351_DISABLE_NEVER: CLKx is NEVER disabled + */ +enum si5351_disable_state { + SI5351_DISABLE_DEFAULT = 0, + SI5351_DISABLE_LOW, + SI5351_DISABLE_HIGH, + SI5351_DISABLE_FLOATING, + SI5351_DISABLE_NEVER, +}; + +/** + * struct si5351_clkout_config - Si5351 clock output configuration + * @clkout: clkout number + * @multisynth_src: multisynth source clock + * @clkout_src: clkout source clock + * @pll_master: if true, clkout can also change pll rate + * @drive: output drive strength + * @rate: initial clkout rate, or default if 0 + */ +struct si5351_clkout_config { + enum si5351_multisynth_src multisynth_src; + enum si5351_clkout_src clkout_src; + enum si5351_drive_strength drive; + enum si5351_disable_state disable_state; + bool pll_master; + unsigned long rate; +}; + +/** + * struct si5351_platform_data - Platform data for the Si5351 clock driver + * @clk_xtal: xtal input clock + * @clk_clkin: clkin input clock + * @pll_src: array of pll source clock setting + * @clkout: array of clkout configuration + */ +struct si5351_platform_data { + enum si5351_pll_src pll_src[2]; + struct si5351_clkout_config clkout[8]; +}; + +#endif diff --git a/kernel/include/linux/platform_data/simplefb.h b/kernel/include/linux/platform_data/simplefb.h new file mode 100644 index 000000000..077303ced --- /dev/null +++ b/kernel/include/linux/platform_data/simplefb.h @@ -0,0 +1,64 @@ +/* + * simplefb.h - Simple Framebuffer Device + * + * Copyright (C) 2013 David Herrmann <dh.herrmann@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __PLATFORM_DATA_SIMPLEFB_H__ +#define __PLATFORM_DATA_SIMPLEFB_H__ + +#include <drm/drm_fourcc.h> +#include <linux/fb.h> +#include <linux/kernel.h> + +/* format array, use it to initialize a "struct simplefb_format" array */ +#define SIMPLEFB_FORMATS \ +{ \ + { "r5g6b5", 16, {11, 5}, {5, 6}, {0, 5}, {0, 0}, DRM_FORMAT_RGB565 }, \ + { "x1r5g5b5", 16, {10, 5}, {5, 5}, {0, 5}, {0, 0}, DRM_FORMAT_XRGB1555 }, \ + { "a1r5g5b5", 16, {10, 5}, {5, 5}, {0, 5}, {15, 1}, DRM_FORMAT_ARGB1555 }, \ + { "r8g8b8", 24, {16, 8}, {8, 8}, {0, 8}, {0, 0}, DRM_FORMAT_RGB888 }, \ + { "x8r8g8b8", 32, {16, 8}, {8, 8}, {0, 8}, {0, 0}, DRM_FORMAT_XRGB8888 }, \ + { "a8r8g8b8", 32, {16, 8}, {8, 8}, {0, 8}, {24, 8}, DRM_FORMAT_ARGB8888 }, \ + { "a8b8g8r8", 32, {0, 8}, {8, 8}, {16, 8}, {24, 8}, DRM_FORMAT_ABGR8888 }, \ + { "x2r10g10b10", 32, {20, 10}, {10, 10}, {0, 10}, {0, 0}, DRM_FORMAT_XRGB2101010 }, \ + { "a2r10g10b10", 32, {20, 10}, {10, 10}, {0, 10}, {30, 2}, DRM_FORMAT_ARGB2101010 }, \ +} + +/* + * Data-Format for Simple-Framebuffers + * @name: unique 0-terminated name that can be used to identify the mode + * @red,green,blue: Offsets and sizes of the single RGB parts + * @transp: Offset and size of the alpha bits. length=0 means no alpha + * @fourcc: 32bit DRM four-CC code (see drm_fourcc.h) + */ +struct simplefb_format { + const char *name; + u32 bits_per_pixel; + struct fb_bitfield red; + struct fb_bitfield green; + struct fb_bitfield blue; + struct fb_bitfield transp; + u32 fourcc; +}; + +/* + * Simple-Framebuffer description + * If the arch-boot code creates simple-framebuffers without DT support, it + * can pass the width, height, stride and format via this platform-data object. + * The framebuffer location must be given as IORESOURCE_MEM resource. + * @format must be a format as described in "struct simplefb_format" above. + */ +struct simplefb_platform_data { + u32 width; + u32 height; + u32 stride; + const char *format; +}; + +#endif /* __PLATFORM_DATA_SIMPLEFB_H__ */ diff --git a/kernel/include/linux/platform_data/sky81452-backlight.h b/kernel/include/linux/platform_data/sky81452-backlight.h new file mode 100644 index 000000000..1231e9bb0 --- /dev/null +++ b/kernel/include/linux/platform_data/sky81452-backlight.h @@ -0,0 +1,46 @@ +/* + * sky81452.h SKY81452 backlight driver + * + * Copyright 2014 Skyworks Solutions Inc. + * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _SKY81452_BACKLIGHT_H +#define _SKY81452_BACKLIGHT_H + +/** + * struct sky81452_platform_data + * @name: backlight driver name. + If it is not defined, default name is lcd-backlight. + * @gpio_enable:GPIO number which control EN pin + * @enable: Enable mask for current sink channel 1, 2, 3, 4, 5 and 6. + * @ignore_pwm: true if DPWMI should be ignored. + * @dpwm_mode: true is DPWM dimming mode, otherwise Analog dimming mode. + * @phase_shift:true is phase shift mode. + * @short_detecion_threshold: It should be one of 4, 5, 6 and 7V. + * @boost_current_limit: It should be one of 2300, 2750mA. + */ +struct sky81452_bl_platform_data { + const char *name; + int gpio_enable; + unsigned int enable; + bool ignore_pwm; + bool dpwm_mode; + bool phase_shift; + unsigned int short_detection_threshold; + unsigned int boost_current_limit; +}; + +#endif diff --git a/kernel/include/linux/platform_data/spi-clps711x.h b/kernel/include/linux/platform_data/spi-clps711x.h new file mode 100644 index 000000000..301956e63 --- /dev/null +++ b/kernel/include/linux/platform_data/spi-clps711x.h @@ -0,0 +1,21 @@ +/* + * CLPS711X SPI bus driver definitions + * + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef ____LINUX_PLATFORM_DATA_SPI_CLPS711X_H +#define ____LINUX_PLATFORM_DATA_SPI_CLPS711X_H + +/* Board specific platform_data */ +struct spi_clps711x_pdata { + int *chipselect; /* Array of GPIO-numbers */ + int num_chipselect; /* Total count of GPIOs */ +}; + +#endif diff --git a/kernel/include/linux/platform_data/spi-davinci.h b/kernel/include/linux/platform_data/spi-davinci.h new file mode 100644 index 000000000..8dc2fa47a --- /dev/null +++ b/kernel/include/linux/platform_data/spi-davinci.h @@ -0,0 +1,89 @@ +/* + * Copyright 2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ARCH_ARM_DAVINCI_SPI_H +#define __ARCH_ARM_DAVINCI_SPI_H + +#include <linux/platform_data/edma.h> + +#define SPI_INTERN_CS 0xFF + +enum { + SPI_VERSION_1, /* For DM355/DM365/DM6467 */ + SPI_VERSION_2, /* For DA8xx */ +}; + +/** + * davinci_spi_platform_data - Platform data for SPI master device on DaVinci + * + * @version: version of the SPI IP. Different DaVinci devices have slightly + * varying versions of the same IP. + * @num_chipselect: number of chipselects supported by this SPI master + * @intr_line: interrupt line used to connect the SPI IP to the ARM interrupt + * controller withn the SoC. Possible values are 0 and 1. + * @chip_sel: list of GPIOs which can act as chip-selects for the SPI. + * SPI_INTERN_CS denotes internal SPI chip-select. Not necessary + * to populate if all chip-selects are internal. + * @cshold_bug: set this to true if the SPI controller on your chip requires + * a write to CSHOLD bit in between transfers (like in DM355). + * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any + * device on the bus. + */ +struct davinci_spi_platform_data { + u8 version; + u8 num_chipselect; + u8 intr_line; + u8 *chip_sel; + bool cshold_bug; + enum dma_event_q dma_event_q; +}; + +/** + * davinci_spi_config - Per-chip-select configuration for SPI slave devices + * + * @wdelay: amount of delay between transmissions. Measured in number of + * SPI module clocks. + * @odd_parity: polarity of parity flag at the end of transmit data stream. + * 0 - odd parity, 1 - even parity. + * @parity_enable: enable transmission of parity at end of each transmit + * data stream. + * @io_type: type of IO transfer. Choose between polled, interrupt and DMA. + * @timer_disable: disable chip-select timers (setup and hold) + * @c2tdelay: chip-select setup time. Measured in number of SPI module clocks. + * @t2cdelay: chip-select hold time. Measured in number of SPI module clocks. + * @t2edelay: transmit data finished to SPI ENAn pin inactive time. Measured + * in number of SPI clocks. + * @c2edelay: chip-select active to SPI ENAn signal active time. Measured in + * number of SPI clocks. + */ +struct davinci_spi_config { + u8 wdelay; + u8 odd_parity; + u8 parity_enable; +#define SPI_IO_TYPE_INTR 0 +#define SPI_IO_TYPE_POLL 1 +#define SPI_IO_TYPE_DMA 2 + u8 io_type; + u8 timer_disable; + u8 c2tdelay; + u8 t2cdelay; + u8 t2edelay; + u8 c2edelay; +}; + +#endif /* __ARCH_ARM_DAVINCI_SPI_H */ diff --git a/kernel/include/linux/platform_data/spi-ep93xx.h b/kernel/include/linux/platform_data/spi-ep93xx.h new file mode 100644 index 000000000..9bb63ac13 --- /dev/null +++ b/kernel/include/linux/platform_data/spi-ep93xx.h @@ -0,0 +1,29 @@ +#ifndef __ASM_MACH_EP93XX_SPI_H +#define __ASM_MACH_EP93XX_SPI_H + +struct spi_device; + +/** + * struct ep93xx_spi_info - EP93xx specific SPI descriptor + * @num_chipselect: number of chip selects on this board, must be + * at least one + * @use_dma: use DMA for the transfers + */ +struct ep93xx_spi_info { + int num_chipselect; + bool use_dma; +}; + +/** + * struct ep93xx_spi_chip_ops - operation callbacks for SPI slave device + * @setup: setup the chip select mechanism + * @cleanup: cleanup the chip select mechanism + * @cs_control: control the device chip select + */ +struct ep93xx_spi_chip_ops { + int (*setup)(struct spi_device *spi); + void (*cleanup)(struct spi_device *spi); + void (*cs_control)(struct spi_device *spi, int value); +}; + +#endif /* __ASM_MACH_EP93XX_SPI_H */ diff --git a/kernel/include/linux/platform_data/spi-imx.h b/kernel/include/linux/platform_data/spi-imx.h new file mode 100644 index 000000000..08be445e8 --- /dev/null +++ b/kernel/include/linux/platform_data/spi-imx.h @@ -0,0 +1,27 @@ + +#ifndef __MACH_SPI_H_ +#define __MACH_SPI_H_ + +/* + * struct spi_imx_master - device.platform_data for SPI controller devices. + * @chipselect: Array of chipselects for this master. Numbers >= 0 mean gpio + * pins, numbers < 0 mean internal CSPI chipselects according + * to MXC_SPI_CS(). Normally you want to use gpio based chip + * selects as the CSPI module tries to be intelligent about + * when to assert the chipselect: The CSPI module deasserts the + * chipselect once it runs out of input data. The other problem + * is that it is not possible to mix between high active and low + * active chipselects on one single bus using the internal + * chipselects. Unfortunately Freescale decided to put some + * chipselects on dedicated pins which are not usable as gpios, + * so we have to support the internal chipselects. + * @num_chipselect: ARRAY_SIZE(chipselect) + */ +struct spi_imx_master { + int *chipselect; + int num_chipselect; +}; + +#define MXC_SPI_CS(no) ((no) - 32) + +#endif /* __MACH_SPI_H_*/ diff --git a/kernel/include/linux/platform_data/spi-nuc900.h b/kernel/include/linux/platform_data/spi-nuc900.h new file mode 100644 index 000000000..4b3f46832 --- /dev/null +++ b/kernel/include/linux/platform_data/spi-nuc900.h @@ -0,0 +1,33 @@ +/* + * Copyright (c) 2009 Nuvoton technology corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#ifndef __SPI_NUC900_H +#define __SPI_NUC900_H + +extern void mfp_set_groupg(struct device *dev, const char *subname); + +struct nuc900_spi_info { + unsigned int num_cs; + unsigned int lsb; + unsigned int txneg; + unsigned int rxneg; + unsigned int divider; + unsigned int sleep; + unsigned int txnum; + unsigned int txbitlen; + int bus_num; +}; + +struct nuc900_spi_chip { + unsigned char bits_per_word; +}; + +#endif /* __SPI_NUC900_H */ diff --git a/kernel/include/linux/platform_data/spi-omap2-mcspi.h b/kernel/include/linux/platform_data/spi-omap2-mcspi.h new file mode 100644 index 000000000..c100456ea --- /dev/null +++ b/kernel/include/linux/platform_data/spi-omap2-mcspi.h @@ -0,0 +1,30 @@ +#ifndef _OMAP2_MCSPI_H +#define _OMAP2_MCSPI_H + +#define OMAP2_MCSPI_REV 0 +#define OMAP3_MCSPI_REV 1 +#define OMAP4_MCSPI_REV 2 + +#define OMAP4_MCSPI_REG_OFFSET 0x100 + +#define MCSPI_PINDIR_D0_IN_D1_OUT 0 +#define MCSPI_PINDIR_D0_OUT_D1_IN 1 + +struct omap2_mcspi_platform_config { + unsigned short num_cs; + unsigned int regs_offset; + unsigned int pin_dir:1; +}; + +struct omap2_mcspi_dev_attr { + unsigned short num_chipselect; +}; + +struct omap2_mcspi_device_config { + unsigned turbo_mode:1; + + /* toggle chip select after every word */ + unsigned cs_per_word:1; +}; + +#endif diff --git a/kernel/include/linux/platform_data/spi-s3c64xx.h b/kernel/include/linux/platform_data/spi-s3c64xx.h new file mode 100644 index 000000000..d3889b98a --- /dev/null +++ b/kernel/include/linux/platform_data/spi-s3c64xx.h @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2009 Samsung Electronics Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __SPI_S3C64XX_H +#define __SPI_S3C64XX_H + +#include <linux/dmaengine.h> + +struct platform_device; + +/** + * struct s3c64xx_spi_csinfo - ChipSelect description + * @fb_delay: Slave specific feedback delay. + * Refer to FB_CLK_SEL register definition in SPI chapter. + * @line: Custom 'identity' of the CS line. + * + * This is per SPI-Slave Chipselect information. + * Allocate and initialize one in machine init code and make the + * spi_board_info.controller_data point to it. + */ +struct s3c64xx_spi_csinfo { + u8 fb_delay; + unsigned line; +}; + +/** + * struct s3c64xx_spi_info - SPI Controller defining structure + * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field. + * @num_cs: Number of CS this controller emulates. + * @cfg_gpio: Configure pins for this SPI controller. + */ +struct s3c64xx_spi_info { + int src_clk_nr; + int num_cs; + int (*cfg_gpio)(void); + dma_filter_fn filter; +}; + +/** + * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board + * initialization code. + * @cfg_gpio: Pointer to gpio setup function. + * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks. + * @num_cs: Number of elements in the 'cs' array. + * + * Call this from machine init code for each SPI Controller that + * has some chips attached to it. + */ +extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs); +extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs); +extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs); + +/* defined by architecture to configure gpio */ +extern int s3c64xx_spi0_cfg_gpio(void); +extern int s3c64xx_spi1_cfg_gpio(void); +extern int s3c64xx_spi2_cfg_gpio(void); + +extern struct s3c64xx_spi_info s3c64xx_spi0_pdata; +extern struct s3c64xx_spi_info s3c64xx_spi1_pdata; +extern struct s3c64xx_spi_info s3c64xx_spi2_pdata; +#endif /*__SPI_S3C64XX_H */ diff --git a/kernel/include/linux/platform_data/ssm2518.h b/kernel/include/linux/platform_data/ssm2518.h new file mode 100644 index 000000000..9a8e3ea28 --- /dev/null +++ b/kernel/include/linux/platform_data/ssm2518.h @@ -0,0 +1,22 @@ +/* + * SSM2518 amplifier audio driver + * + * Copyright 2013 Analog Devices Inc. + * Author: Lars-Peter Clausen <lars@metafoo.de> + * + * Licensed under the GPL-2. + */ + +#ifndef __LINUX_PLATFORM_DATA_SSM2518_H__ +#define __LINUX_PLATFORM_DATA_SSM2518_H__ + +/** + * struct ssm2518_platform_data - Platform data for the ssm2518 driver + * @enable_gpio: GPIO connected to the nSD pin. Set to -1 if the nSD pin is + * hardwired. + */ +struct ssm2518_platform_data { + int enable_gpio; +}; + +#endif diff --git a/kernel/include/linux/platform_data/st1232_pdata.h b/kernel/include/linux/platform_data/st1232_pdata.h new file mode 100644 index 000000000..cac3e7b4c --- /dev/null +++ b/kernel/include/linux/platform_data/st1232_pdata.h @@ -0,0 +1,13 @@ +#ifndef _LINUX_ST1232_PDATA_H +#define _LINUX_ST1232_PDATA_H + +/* + * Optional platform data + * + * Use this if you want the driver to drive the reset pin. + */ +struct st1232_pdata { + int reset_gpio; +}; + +#endif diff --git a/kernel/include/linux/platform_data/st21nfca.h b/kernel/include/linux/platform_data/st21nfca.h new file mode 100644 index 000000000..cc2bdafb0 --- /dev/null +++ b/kernel/include/linux/platform_data/st21nfca.h @@ -0,0 +1,33 @@ +/* + * Driver include for the ST21NFCA NFC chip. + * + * Copyright (C) 2014 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _ST21NFCA_HCI_H_ +#define _ST21NFCA_HCI_H_ + +#include <linux/i2c.h> + +#define ST21NFCA_HCI_DRIVER_NAME "st21nfca_hci" + +struct st21nfca_nfc_platform_data { + unsigned int gpio_ena; + unsigned int irq_polarity; + bool is_ese_present; + bool is_uicc_present; +}; + +#endif /* _ST21NFCA_HCI_H_ */ diff --git a/kernel/include/linux/platform_data/st21nfcb.h b/kernel/include/linux/platform_data/st21nfcb.h new file mode 100644 index 000000000..b023373d9 --- /dev/null +++ b/kernel/include/linux/platform_data/st21nfcb.h @@ -0,0 +1,29 @@ +/* + * Driver include for the ST21NFCB NFC chip. + * + * Copyright (C) 2014 STMicroelectronics SAS. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _ST21NFCB_NCI_H_ +#define _ST21NFCB_NCI_H_ + +#define ST21NFCB_NCI_DRIVER_NAME "st21nfcb_nci" + +struct st21nfcb_nfc_platform_data { + unsigned int gpio_reset; + unsigned int irq_polarity; +}; + +#endif /* _ST21NFCB_NCI_H_ */ diff --git a/kernel/include/linux/platform_data/st33zp24.h b/kernel/include/linux/platform_data/st33zp24.h new file mode 100644 index 000000000..817dfdb37 --- /dev/null +++ b/kernel/include/linux/platform_data/st33zp24.h @@ -0,0 +1,28 @@ +/* + * STMicroelectronics TPM Linux driver for TPM 1.2 ST33ZP24 + * Copyright (C) 2009 - 2015 STMicroelectronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ +#ifndef __ST33ZP24_H__ +#define __ST33ZP24_H__ + +#define TPM_ST33_I2C "st33zp24-i2c" +#define TPM_ST33_SPI "st33zp24-spi" + +struct st33zp24_platform_data { + int io_lpcpd; +}; + +#endif /* __ST33ZP24_H__ */ diff --git a/kernel/include/linux/platform_data/st_sensors_pdata.h b/kernel/include/linux/platform_data/st_sensors_pdata.h new file mode 100644 index 000000000..753839187 --- /dev/null +++ b/kernel/include/linux/platform_data/st_sensors_pdata.h @@ -0,0 +1,24 @@ +/* + * STMicroelectronics sensors platform-data driver + * + * Copyright 2013 STMicroelectronics Inc. + * + * Denis Ciocca <denis.ciocca@st.com> + * + * Licensed under the GPL-2. + */ + +#ifndef ST_SENSORS_PDATA_H +#define ST_SENSORS_PDATA_H + +/** + * struct st_sensors_platform_data - Platform data for the ST sensors + * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2). + * Available only for accelerometer and pressure sensors. + * Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet). + */ +struct st_sensors_platform_data { + u8 drdy_int_pin; +}; + +#endif /* ST_SENSORS_PDATA_H */ diff --git a/kernel/include/linux/platform_data/syscon.h b/kernel/include/linux/platform_data/syscon.h new file mode 100644 index 000000000..2354c6fa3 --- /dev/null +++ b/kernel/include/linux/platform_data/syscon.h @@ -0,0 +1,8 @@ +#ifndef PLATFORM_DATA_SYSCON_H +#define PLATFORM_DATA_SYSCON_H + +struct syscon_platform_data { + const char *label; +}; + +#endif diff --git a/kernel/include/linux/platform_data/touchscreen-s3c2410.h b/kernel/include/linux/platform_data/touchscreen-s3c2410.h new file mode 100644 index 000000000..58dc7c5ae --- /dev/null +++ b/kernel/include/linux/platform_data/touchscreen-s3c2410.h @@ -0,0 +1,24 @@ +/* + * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __TOUCHSCREEN_S3C2410_H +#define __TOUCHSCREEN_S3C2410_H + +struct s3c2410_ts_mach_info { + int delay; + int presc; + int oversampling_shift; + void (*cfg_gpio)(struct platform_device *dev); +}; + +extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *); + +/* defined by architecture to configure gpio */ +extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev); + +#endif /*__TOUCHSCREEN_S3C2410_H */ diff --git a/kernel/include/linux/platform_data/tsl2563.h b/kernel/include/linux/platform_data/tsl2563.h new file mode 100644 index 000000000..c90d7a09d --- /dev/null +++ b/kernel/include/linux/platform_data/tsl2563.h @@ -0,0 +1,8 @@ +#ifndef __LINUX_TSL2563_H +#define __LINUX_TSL2563_H + +struct tsl2563_platform_data { + int cover_comp_gain; +}; + +#endif /* __LINUX_TSL2563_H */ diff --git a/kernel/include/linux/platform_data/uio_dmem_genirq.h b/kernel/include/linux/platform_data/uio_dmem_genirq.h new file mode 100644 index 000000000..973c1bb32 --- /dev/null +++ b/kernel/include/linux/platform_data/uio_dmem_genirq.h @@ -0,0 +1,26 @@ +/* + * include/linux/platform_data/uio_dmem_genirq.h + * + * Copyright (C) 2012 Damian Hobson-Garcia + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _UIO_DMEM_GENIRQ_H +#define _UIO_DMEM_GENIRQ_H + +#include <linux/uio_driver.h> + +struct uio_dmem_genirq_pdata { + struct uio_info uioinfo; + unsigned int *dynamic_region_sizes; + unsigned int num_dynamic_regions; +}; +#endif /* _UIO_DMEM_GENIRQ_H */ diff --git a/kernel/include/linux/platform_data/uio_pruss.h b/kernel/include/linux/platform_data/uio_pruss.h new file mode 100644 index 000000000..3d47d2198 --- /dev/null +++ b/kernel/include/linux/platform_data/uio_pruss.h @@ -0,0 +1,26 @@ +/* + * include/linux/platform_data/uio_pruss.h + * + * Platform data for uio_pruss driver + * + * Copyright (C) 2010-11 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _UIO_PRUSS_H_ +#define _UIO_PRUSS_H_ + +/* To configure the PRUSS INTC base offset for UIO driver */ +struct uio_pruss_pdata { + u32 pintc_base; + struct gen_pool *sram_pool; +}; +#endif /* _UIO_PRUSS_H_ */ diff --git a/kernel/include/linux/platform_data/usb-davinci.h b/kernel/include/linux/platform_data/usb-davinci.h new file mode 100644 index 000000000..e0bc4abe6 --- /dev/null +++ b/kernel/include/linux/platform_data/usb-davinci.h @@ -0,0 +1,59 @@ +/* + * USB related definitions + * + * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_USB_H +#define __ASM_ARCH_USB_H + +/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */ +#define CFGCHIP2_PHYCLKGD (1 << 17) +#define CFGCHIP2_VBUSSENSE (1 << 16) +#define CFGCHIP2_RESET (1 << 15) +#define CFGCHIP2_OTGMODE (3 << 13) +#define CFGCHIP2_NO_OVERRIDE (0 << 13) +#define CFGCHIP2_FORCE_HOST (1 << 13) +#define CFGCHIP2_FORCE_DEVICE (2 << 13) +#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13) +#define CFGCHIP2_USB1PHYCLKMUX (1 << 12) +#define CFGCHIP2_USB2PHYCLKMUX (1 << 11) +#define CFGCHIP2_PHYPWRDN (1 << 10) +#define CFGCHIP2_OTGPWRDN (1 << 9) +#define CFGCHIP2_DATPOL (1 << 8) +#define CFGCHIP2_USB1SUSPENDM (1 << 7) +#define CFGCHIP2_PHY_PLLON (1 << 6) /* override PLL suspend */ +#define CFGCHIP2_SESENDEN (1 << 5) /* Vsess_end comparator */ +#define CFGCHIP2_VBDTCTEN (1 << 4) /* Vbus comparator */ +#define CFGCHIP2_REFFREQ (0xf << 0) +#define CFGCHIP2_REFFREQ_12MHZ (1 << 0) +#define CFGCHIP2_REFFREQ_24MHZ (2 << 0) +#define CFGCHIP2_REFFREQ_48MHZ (3 << 0) + +struct da8xx_ohci_root_hub; + +typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub, + unsigned port); + +/* Passed as the platform data to the OHCI driver */ +struct da8xx_ohci_root_hub { + /* Switch the port power on/off */ + int (*set_power)(unsigned port, int on); + /* Read the port power status */ + int (*get_power)(unsigned port); + /* Read the port over-current indicator */ + int (*get_oci)(unsigned port); + /* Over-current indicator change notification (pass NULL to disable) */ + int (*ocic_notify)(da8xx_ocic_handler_t handler); + + /* Time from power on to power good (in 2 ms units) */ + u8 potpgt; +}; + +void davinci_setup_usb(unsigned mA, unsigned potpgt_ms); + +#endif /* ifndef __ASM_ARCH_USB_H */ diff --git a/kernel/include/linux/platform_data/usb-ehci-mxc.h b/kernel/include/linux/platform_data/usb-ehci-mxc.h new file mode 100644 index 000000000..157e71f79 --- /dev/null +++ b/kernel/include/linux/platform_data/usb-ehci-mxc.h @@ -0,0 +1,13 @@ +#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H +#define __INCLUDE_ASM_ARCH_MXC_EHCI_H + +struct mxc_usbh_platform_data { + int (*init)(struct platform_device *pdev); + int (*exit)(struct platform_device *pdev); + + unsigned int portsc; + struct usb_phy *otg; +}; + +#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */ + diff --git a/kernel/include/linux/platform_data/usb-ehci-orion.h b/kernel/include/linux/platform_data/usb-ehci-orion.h new file mode 100644 index 000000000..52b0acb35 --- /dev/null +++ b/kernel/include/linux/platform_data/usb-ehci-orion.h @@ -0,0 +1,24 @@ +/* + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __USB_EHCI_ORION_H +#define __USB_EHCI_ORION_H + +#include <linux/mbus.h> + +enum orion_ehci_phy_ver { + EHCI_PHY_ORION, + EHCI_PHY_DD, + EHCI_PHY_KW, + EHCI_PHY_NA, +}; + +struct orion_ehci_data { + enum orion_ehci_phy_ver phy_version; +}; + + +#endif diff --git a/kernel/include/linux/platform_data/usb-musb-ux500.h b/kernel/include/linux/platform_data/usb-musb-ux500.h new file mode 100644 index 000000000..dd9c83ac7 --- /dev/null +++ b/kernel/include/linux/platform_data/usb-musb-ux500.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef __ASM_ARCH_USB_H +#define __ASM_ARCH_USB_H + +#include <linux/dmaengine.h> + +#define UX500_MUSB_DMA_NUM_RX_TX_CHANNELS 8 + +struct ux500_musb_board_data { + void **dma_rx_param_array; + void **dma_tx_param_array; + bool (*dma_filter)(struct dma_chan *chan, void *filter_param); +}; + +void ux500_add_usb(struct device *parent, resource_size_t base, + int irq, int *dma_rx_cfg, int *dma_tx_cfg); +#endif diff --git a/kernel/include/linux/platform_data/usb-mx2.h b/kernel/include/linux/platform_data/usb-mx2.h new file mode 100644 index 000000000..22d0b5962 --- /dev/null +++ b/kernel/include/linux/platform_data/usb-mx2.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2009 Martin Fuzzey <mfuzzey@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_MX21_USBH +#define __ASM_ARCH_MX21_USBH + +enum mx21_usbh_xcvr { + /* Values below as used by hardware (HWMODE register) */ + MX21_USBXCVR_TXDIF_RXDIF = 0, + MX21_USBXCVR_TXDIF_RXSE = 1, + MX21_USBXCVR_TXSE_RXDIF = 2, + MX21_USBXCVR_TXSE_RXSE = 3, +}; + +struct mx21_usbh_platform_data { + enum mx21_usbh_xcvr host_xcvr; /* tranceiver mode host 1,2 ports */ + enum mx21_usbh_xcvr otg_xcvr; /* tranceiver mode otg (as host) port */ + u16 enable_host1:1, + enable_host2:1, + enable_otg_host:1, /* enable "OTG" port (as host) */ + host1_xcverless:1, /* traceiverless host1 port */ + host1_txenoe:1, /* output enable host1 transmit enable */ + otg_ext_xcvr:1, /* external tranceiver for OTG port */ + unused:10; +}; + +#endif /* __ASM_ARCH_MX21_USBH */ diff --git a/kernel/include/linux/platform_data/usb-ohci-pxa27x.h b/kernel/include/linux/platform_data/usb-ohci-pxa27x.h new file mode 100644 index 000000000..95b6e2a6e --- /dev/null +++ b/kernel/include/linux/platform_data/usb-ohci-pxa27x.h @@ -0,0 +1,36 @@ +#ifndef ASMARM_ARCH_OHCI_H +#define ASMARM_ARCH_OHCI_H + +struct device; + +struct pxaohci_platform_data { + int (*init)(struct device *); + void (*exit)(struct device *); + + unsigned long flags; +#define ENABLE_PORT1 (1 << 0) +#define ENABLE_PORT2 (1 << 1) +#define ENABLE_PORT3 (1 << 2) +#define ENABLE_PORT_ALL (ENABLE_PORT1 | ENABLE_PORT2 | ENABLE_PORT3) + +#define POWER_SENSE_LOW (1 << 3) +#define POWER_CONTROL_LOW (1 << 4) +#define NO_OC_PROTECTION (1 << 5) +#define OC_MODE_GLOBAL (0 << 6) +#define OC_MODE_PERPORT (1 << 6) + + int power_on_delay; /* Power On to Power Good time - in ms + * HCD must wait for this duration before + * accessing a powered on port + */ + int port_mode; +#define PMM_NPS_MODE 1 +#define PMM_GLOBAL_MODE 2 +#define PMM_PERPORT_MODE 3 + + int power_budget; +}; + +extern void pxa_set_ohci_info(struct pxaohci_platform_data *info); + +#endif diff --git a/kernel/include/linux/platform_data/usb-ohci-s3c2410.h b/kernel/include/linux/platform_data/usb-ohci-s3c2410.h new file mode 100644 index 000000000..7fa1fbefc --- /dev/null +++ b/kernel/include/linux/platform_data/usb-ohci-s3c2410.h @@ -0,0 +1,43 @@ +/* arch/arm/plat-samsung/include/plat/usb-control.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C - USB host port information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_USBCONTROL_H +#define __ASM_ARCH_USBCONTROL_H + +#define S3C_HCDFLG_USED (1) + +struct s3c2410_hcd_port { + unsigned char flags; + unsigned char power; + unsigned char oc_status; + unsigned char oc_changed; +}; + +struct s3c2410_hcd_info { + struct usb_hcd *hcd; + struct s3c2410_hcd_port port[2]; + + void (*power_control)(int port, int to); + void (*enable_oc)(struct s3c2410_hcd_info *, int on); + void (*report_oc)(struct s3c2410_hcd_info *, int ports); +}; + +static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports) +{ + if (info->report_oc != NULL) { + (info->report_oc)(info, ports); + } +} + +extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info); + +#endif /*__ASM_ARCH_USBCONTROL_H */ diff --git a/kernel/include/linux/platform_data/usb-omap.h b/kernel/include/linux/platform_data/usb-omap.h new file mode 100644 index 000000000..fa579b4c6 --- /dev/null +++ b/kernel/include/linux/platform_data/usb-omap.h @@ -0,0 +1,88 @@ +/* + * usb-omap.h - Platform data for the various OMAP USB IPs + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * + * This software is distributed under the terms of the GNU General Public + * License ("GPL") version 2, as published by the Free Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#define OMAP3_HS_USB_PORTS 3 + +enum usbhs_omap_port_mode { + OMAP_USBHS_PORT_MODE_UNUSED, + OMAP_EHCI_PORT_MODE_PHY, + OMAP_EHCI_PORT_MODE_TLL, + OMAP_EHCI_PORT_MODE_HSIC, + OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0, + OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM, + OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0, + OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM, + OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0, + OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM, + OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0, + OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM, + OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0, + OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM +}; + +struct usbtll_omap_platform_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; +}; + +struct ehci_hcd_omap_platform_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; + int reset_gpio_port[OMAP3_HS_USB_PORTS]; + struct regulator *regulator[OMAP3_HS_USB_PORTS]; + unsigned phy_reset:1; +}; + +struct ohci_hcd_omap_platform_data { + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; + unsigned es2_compatibility:1; +}; + +struct usbhs_omap_platform_data { + int nports; + enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; + int reset_gpio_port[OMAP3_HS_USB_PORTS]; + struct regulator *regulator[OMAP3_HS_USB_PORTS]; + + struct ehci_hcd_omap_platform_data *ehci_data; + struct ohci_hcd_omap_platform_data *ohci_data; + + /* OMAP3 <= ES2.1 have a single ulpi bypass control bit */ + unsigned single_ulpi_bypass:1; + unsigned es2_compatibility:1; + unsigned phy_reset:1; +}; + +/*-------------------------------------------------------------------------*/ + +struct omap_musb_board_data { + u8 interface_type; + u8 mode; + u16 power; + unsigned extvbus:1; + void (*set_phy_power)(u8 on); + void (*clear_irq)(void); + void (*set_mode)(u8 mode); + void (*reset)(void); +}; + +enum musb_interface { + MUSB_INTERFACE_ULPI, + MUSB_INTERFACE_UTMI +}; diff --git a/kernel/include/linux/platform_data/usb-omap1.h b/kernel/include/linux/platform_data/usb-omap1.h new file mode 100644 index 000000000..43b5ce139 --- /dev/null +++ b/kernel/include/linux/platform_data/usb-omap1.h @@ -0,0 +1,53 @@ +/* + * Platform data for OMAP1 USB + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive for + * more details. + */ +#ifndef __LINUX_USB_OMAP1_H +#define __LINUX_USB_OMAP1_H + +#include <linux/platform_device.h> + +struct omap_usb_config { + /* Configure drivers according to the connectors on your board: + * - "A" connector (rectagular) + * ... for host/OHCI use, set "register_host". + * - "B" connector (squarish) or "Mini-B" + * ... for device/gadget use, set "register_dev". + * - "Mini-AB" connector (very similar to Mini-B) + * ... for OTG use as device OR host, initialize "otg" + */ + unsigned register_host:1; + unsigned register_dev:1; + u8 otg; /* port number, 1-based: usb1 == 2 */ + + const char *extcon; /* extcon device for OTG */ + + u8 hmc_mode; + + /* implicitly true if otg: host supports remote wakeup? */ + u8 rwc; + + /* signaling pins used to talk to transceiver on usbN: + * 0 == usbN unused + * 2 == usb0-only, using internal transceiver + * 3 == 3 wire bidirectional + * 4 == 4 wire bidirectional + * 6 == 6 wire unidirectional (or TLL) + */ + u8 pins[3]; + + struct platform_device *udc_device; + struct platform_device *ohci_device; + struct platform_device *otg_device; + + u32 (*usb0_init)(unsigned nwires, unsigned is_device); + u32 (*usb1_init)(unsigned nwires); + u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup); + + int (*ocpi_enable)(void); +}; + +#endif /* __LINUX_USB_OMAP1_H */ diff --git a/kernel/include/linux/platform_data/usb-pxa3xx-ulpi.h b/kernel/include/linux/platform_data/usb-pxa3xx-ulpi.h new file mode 100644 index 000000000..9d82cb65e --- /dev/null +++ b/kernel/include/linux/platform_data/usb-pxa3xx-ulpi.h @@ -0,0 +1,35 @@ +/* + * PXA3xx U2D header + * + * Copyright (C) 2010 CompuLab Ltd. + * + * Igor Grinberg <grinberg@compulab.co.il> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __PXA310_U2D__ +#define __PXA310_U2D__ + +#include <linux/usb/ulpi.h> + +struct pxa3xx_u2d_platform_data { + +#define ULPI_SER_6PIN (1 << 0) +#define ULPI_SER_3PIN (1 << 1) + unsigned int ulpi_mode; + + int (*init)(struct device *); + void (*exit)(struct device *); +}; + + +/* Start PXA3xx U2D host */ +int pxa3xx_u2d_start_hc(struct usb_bus *host); +/* Stop PXA3xx U2D host */ +void pxa3xx_u2d_stop_hc(struct usb_bus *host); + +extern void pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info); + +#endif /* __PXA310_U2D__ */ diff --git a/kernel/include/linux/platform_data/usb-rcar-gen2-phy.h b/kernel/include/linux/platform_data/usb-rcar-gen2-phy.h new file mode 100644 index 000000000..dd3ba46c0 --- /dev/null +++ b/kernel/include/linux/platform_data/usb-rcar-gen2-phy.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Cogent Embedded, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __USB_RCAR_GEN2_PHY_H +#define __USB_RCAR_GEN2_PHY_H + +#include <linux/types.h> + +struct rcar_gen2_phy_platform_data { + /* USB channel 0 configuration */ + bool chan0_pci:1; /* true: PCI USB host 0, false: USBHS */ + /* USB channel 2 configuration */ + bool chan2_pci:1; /* true: PCI USB host 2, false: USBSS */ +}; + +#endif diff --git a/kernel/include/linux/platform_data/usb-rcar-phy.h b/kernel/include/linux/platform_data/usb-rcar-phy.h new file mode 100644 index 000000000..8ec6964a3 --- /dev/null +++ b/kernel/include/linux/platform_data/usb-rcar-phy.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013 Cogent Embedded, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __USB_RCAR_PHY_H +#define __USB_RCAR_PHY_H + +#include <linux/types.h> + +struct rcar_phy_platform_data { + bool ferrite_bead:1; /* (R8A7778 only) */ + + bool port1_func:1; /* true: port 1 used by function, false: host */ + unsigned penc1:1; /* Output of the PENC1 pin in function mode */ + struct { /* Overcurrent pin control for ports 0..2 */ + bool select_3_3v:1; /* true: USB_OVCn pin, false: OVCn pin */ + /* Set to false on port 1 in function mode */ + bool active_high:1; /* true: active high, false: active low */ + /* Set to true on port 1 in function mode */ + } ovc_pin[3]; /* (R8A7778 only has 2 ports) */ +}; + +#endif /* __USB_RCAR_PHY_H */ diff --git a/kernel/include/linux/platform_data/usb-s3c2410_udc.h b/kernel/include/linux/platform_data/usb-s3c2410_udc.h new file mode 100644 index 000000000..de8e2288a --- /dev/null +++ b/kernel/include/linux/platform_data/usb-s3c2410_udc.h @@ -0,0 +1,44 @@ +/* arch/arm/plat-samsung/include/plat/udc.h + * + * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * + * Changelog: + * 14-Mar-2005 RTP Created file + * 02-Aug-2005 RTP File rename + * 07-Sep-2005 BJD Minor cleanups, changed cmd to enum + * 18-Jan-2007 HMW Add per-platform vbus_draw function +*/ + +#ifndef __ASM_ARM_ARCH_UDC_H +#define __ASM_ARM_ARCH_UDC_H + +enum s3c2410_udc_cmd_e { + S3C2410_UDC_P_ENABLE = 1, /* Pull-up enable */ + S3C2410_UDC_P_DISABLE = 2, /* Pull-up disable */ + S3C2410_UDC_P_RESET = 3, /* UDC reset, in case of */ +}; + +struct s3c2410_udc_mach_info { + void (*udc_command)(enum s3c2410_udc_cmd_e); + void (*vbus_draw)(unsigned int ma); + + unsigned int pullup_pin; + unsigned int pullup_pin_inverted; + + unsigned int vbus_pin; + unsigned char vbus_pin_inverted; +}; + +extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *); + +struct s3c24xx_hsudc_platdata; + +extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd); + +#endif /* __ASM_ARM_ARCH_UDC_H */ diff --git a/kernel/include/linux/platform_data/usb3503.h b/kernel/include/linux/platform_data/usb3503.h new file mode 100644 index 000000000..1d1b6ef87 --- /dev/null +++ b/kernel/include/linux/platform_data/usb3503.h @@ -0,0 +1,24 @@ +#ifndef __USB3503_H__ +#define __USB3503_H__ + +#define USB3503_I2C_NAME "usb3503" + +#define USB3503_OFF_PORT1 (1 << 1) +#define USB3503_OFF_PORT2 (1 << 2) +#define USB3503_OFF_PORT3 (1 << 3) + +enum usb3503_mode { + USB3503_MODE_UNKNOWN, + USB3503_MODE_HUB, + USB3503_MODE_STANDBY, +}; + +struct usb3503_platform_data { + enum usb3503_mode initial_mode; + u8 port_off_mask; + int gpio_intn; + int gpio_connect; + int gpio_reset; +}; + +#endif diff --git a/kernel/include/linux/platform_data/ux500_wdt.h b/kernel/include/linux/platform_data/ux500_wdt.h new file mode 100644 index 000000000..1689ff4c3 --- /dev/null +++ b/kernel/include/linux/platform_data/ux500_wdt.h @@ -0,0 +1,19 @@ +/* + * Copyright (C) ST Ericsson SA 2011 + * + * License Terms: GNU General Public License v2 + * + * STE Ux500 Watchdog platform data + */ +#ifndef __UX500_WDT_H +#define __UX500_WDT_H + +/** + * struct ux500_wdt_data + */ +struct ux500_wdt_data { + unsigned int timeout; + bool has_28_bits_resolution; +}; + +#endif /* __UX500_WDT_H */ diff --git a/kernel/include/linux/platform_data/video-clcd-versatile.h b/kernel/include/linux/platform_data/video-clcd-versatile.h new file mode 100644 index 000000000..09ccf182a --- /dev/null +++ b/kernel/include/linux/platform_data/video-clcd-versatile.h @@ -0,0 +1,27 @@ +#ifndef PLAT_CLCD_H +#define PLAT_CLCD_H + +#ifdef CONFIG_PLAT_VERSATILE_CLCD +struct clcd_panel *versatile_clcd_get_panel(const char *); +int versatile_clcd_setup_dma(struct clcd_fb *, unsigned long); +int versatile_clcd_mmap_dma(struct clcd_fb *, struct vm_area_struct *); +void versatile_clcd_remove_dma(struct clcd_fb *); +#else +static inline struct clcd_panel *versatile_clcd_get_panel(const char *s) +{ + return NULL; +} +static inline int versatile_clcd_setup_dma(struct clcd_fb *fb, unsigned long framesize) +{ + return -ENODEV; +} +static inline int versatile_clcd_mmap_dma(struct clcd_fb *fb, struct vm_area_struct *vm) +{ + return -ENODEV; +} +static inline void versatile_clcd_remove_dma(struct clcd_fb *fb) +{ +} +#endif + +#endif diff --git a/kernel/include/linux/platform_data/video-ep93xx.h b/kernel/include/linux/platform_data/video-ep93xx.h new file mode 100644 index 000000000..92fc2b223 --- /dev/null +++ b/kernel/include/linux/platform_data/video-ep93xx.h @@ -0,0 +1,52 @@ +#ifndef __VIDEO_EP93XX_H +#define __VIDEO_EP93XX_H + +struct platform_device; +struct fb_videomode; +struct fb_info; + +#define EP93XXFB_USE_MODEDB 0 + +/* VideoAttributes flags */ +#define EP93XXFB_STATE_MACHINE_ENABLE (1 << 0) +#define EP93XXFB_PIXEL_CLOCK_ENABLE (1 << 1) +#define EP93XXFB_VSYNC_ENABLE (1 << 2) +#define EP93XXFB_PIXEL_DATA_ENABLE (1 << 3) +#define EP93XXFB_COMPOSITE_SYNC (1 << 4) +#define EP93XXFB_SYNC_VERT_HIGH (1 << 5) +#define EP93XXFB_SYNC_HORIZ_HIGH (1 << 6) +#define EP93XXFB_SYNC_BLANK_HIGH (1 << 7) +#define EP93XXFB_PCLK_FALLING (1 << 8) +#define EP93XXFB_ENABLE_AC (1 << 9) +#define EP93XXFB_ENABLE_LCD (1 << 10) +#define EP93XXFB_ENABLE_CCIR (1 << 12) +#define EP93XXFB_USE_PARALLEL_INTERFACE (1 << 13) +#define EP93XXFB_ENABLE_INTERRUPT (1 << 14) +#define EP93XXFB_USB_INTERLACE (1 << 16) +#define EP93XXFB_USE_EQUALIZATION (1 << 17) +#define EP93XXFB_USE_DOUBLE_HORZ (1 << 18) +#define EP93XXFB_USE_DOUBLE_VERT (1 << 19) +#define EP93XXFB_USE_BLANK_PIXEL (1 << 20) +#define EP93XXFB_USE_SDCSN0 (0 << 21) +#define EP93XXFB_USE_SDCSN1 (1 << 21) +#define EP93XXFB_USE_SDCSN2 (2 << 21) +#define EP93XXFB_USE_SDCSN3 (3 << 21) + +#define EP93XXFB_ENABLE (EP93XXFB_STATE_MACHINE_ENABLE | \ + EP93XXFB_PIXEL_CLOCK_ENABLE | \ + EP93XXFB_VSYNC_ENABLE | \ + EP93XXFB_PIXEL_DATA_ENABLE) + +struct ep93xxfb_mach_info { + unsigned int num_modes; + const struct fb_videomode *modes; + const struct fb_videomode *default_mode; + int bpp; + unsigned int flags; + + int (*setup)(struct platform_device *pdev); + void (*teardown)(struct platform_device *pdev); + void (*blank)(int blank_mode, struct fb_info *info); +}; + +#endif /* __VIDEO_EP93XX_H */ diff --git a/kernel/include/linux/platform_data/video-imxfb.h b/kernel/include/linux/platform_data/video-imxfb.h new file mode 100644 index 000000000..18e908324 --- /dev/null +++ b/kernel/include/linux/platform_data/video-imxfb.h @@ -0,0 +1,72 @@ +/* + * This structure describes the machine which we are running on. + */ +#ifndef __MACH_IMXFB_H__ +#define __MACH_IMXFB_H__ + +#include <linux/fb.h> + +#define PCR_TFT (1 << 31) +#define PCR_COLOR (1 << 30) +#define PCR_PBSIZ_1 (0 << 28) +#define PCR_PBSIZ_2 (1 << 28) +#define PCR_PBSIZ_4 (2 << 28) +#define PCR_PBSIZ_8 (3 << 28) +#define PCR_BPIX_1 (0 << 25) +#define PCR_BPIX_2 (1 << 25) +#define PCR_BPIX_4 (2 << 25) +#define PCR_BPIX_8 (3 << 25) +#define PCR_BPIX_12 (4 << 25) +#define PCR_BPIX_16 (5 << 25) +#define PCR_BPIX_18 (6 << 25) +#define PCR_PIXPOL (1 << 24) +#define PCR_FLMPOL (1 << 23) +#define PCR_LPPOL (1 << 22) +#define PCR_CLKPOL (1 << 21) +#define PCR_OEPOL (1 << 20) +#define PCR_SCLKIDLE (1 << 19) +#define PCR_END_SEL (1 << 18) +#define PCR_END_BYTE_SWAP (1 << 17) +#define PCR_REV_VS (1 << 16) +#define PCR_ACD_SEL (1 << 15) +#define PCR_ACD(x) (((x) & 0x7f) << 8) +#define PCR_SCLK_SEL (1 << 7) +#define PCR_SHARP (1 << 6) +#define PCR_PCD(x) ((x) & 0x3f) + +#define PWMR_CLS(x) (((x) & 0x1ff) << 16) +#define PWMR_LDMSK (1 << 15) +#define PWMR_SCR1 (1 << 10) +#define PWMR_SCR0 (1 << 9) +#define PWMR_CC_EN (1 << 8) +#define PWMR_PW(x) ((x) & 0xff) + +#define LSCR1_PS_RISE_DELAY(x) (((x) & 0x7f) << 26) +#define LSCR1_CLS_RISE_DELAY(x) (((x) & 0x3f) << 16) +#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8) +#define LSCR1_GRAY2(x) (((x) & 0xf) << 4) +#define LSCR1_GRAY1(x) (((x) & 0xf)) + +#define DMACR_BURST (1 << 31) +#define DMACR_HM(x) (((x) & 0xf) << 16) +#define DMACR_TM(x) ((x) & 0xf) + +struct imx_fb_videomode { + struct fb_videomode mode; + u32 pcr; + unsigned char bpp; +}; + +struct imx_fb_platform_data { + struct imx_fb_videomode *mode; + int num_modes; + + u_int pwmr; + u_int lscr1; + u_int dmacr; + + int (*init)(struct platform_device *); + void (*exit)(struct platform_device *); +}; + +#endif /* ifndef __MACH_IMXFB_H__ */ diff --git a/kernel/include/linux/platform_data/video-msm_fb.h b/kernel/include/linux/platform_data/video-msm_fb.h new file mode 100644 index 000000000..31449be3e --- /dev/null +++ b/kernel/include/linux/platform_data/video-msm_fb.h @@ -0,0 +1,146 @@ +/* + * Internal shared definitions for various MSM framebuffer parts. + * + * Copyright (C) 2007 Google Incorporated + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MSM_FB_H_ +#define _MSM_FB_H_ + +#include <linux/device.h> + +struct mddi_info; + +struct msm_fb_data { + int xres; /* x resolution in pixels */ + int yres; /* y resolution in pixels */ + int width; /* disply width in mm */ + int height; /* display height in mm */ + unsigned output_format; +}; + +struct msmfb_callback { + void (*func)(struct msmfb_callback *); +}; + +enum { + MSM_MDDI_PMDH_INTERFACE, + MSM_MDDI_EMDH_INTERFACE, + MSM_EBI2_INTERFACE, +}; + +#define MSMFB_CAP_PARTIAL_UPDATES (1 << 0) + +struct msm_panel_data { + /* turns off the fb memory */ + int (*suspend)(struct msm_panel_data *); + /* turns on the fb memory */ + int (*resume)(struct msm_panel_data *); + /* turns off the panel */ + int (*blank)(struct msm_panel_data *); + /* turns on the panel */ + int (*unblank)(struct msm_panel_data *); + void (*wait_vsync)(struct msm_panel_data *); + void (*request_vsync)(struct msm_panel_data *, struct msmfb_callback *); + void (*clear_vsync)(struct msm_panel_data *); + /* from the enum above */ + unsigned interface_type; + /* data to be passed to the fb driver */ + struct msm_fb_data *fb_data; + + /* capabilities supported by the panel */ + uint32_t caps; +}; + +struct msm_mddi_client_data { + void (*suspend)(struct msm_mddi_client_data *); + void (*resume)(struct msm_mddi_client_data *); + void (*activate_link)(struct msm_mddi_client_data *); + void (*remote_write)(struct msm_mddi_client_data *, uint32_t val, + uint32_t reg); + uint32_t (*remote_read)(struct msm_mddi_client_data *, uint32_t reg); + void (*auto_hibernate)(struct msm_mddi_client_data *, int); + /* custom data that needs to be passed from the board file to a + * particular client */ + void *private_client_data; + struct resource *fb_resource; + /* from the list above */ + unsigned interface_type; +}; + +struct msm_mddi_platform_data { + unsigned int clk_rate; + void (*power_client)(struct msm_mddi_client_data *, int on); + + /* fixup the mfr name, product id */ + void (*fixup)(uint16_t *mfr_name, uint16_t *product_id); + + struct resource *fb_resource; /*optional*/ + /* number of clients in the list that follows */ + int num_clients; + /* array of client information of clients */ + struct { + unsigned product_id; /* mfr id in top 16 bits, product id + * in lower 16 bits + */ + char *name; /* the device name will be the platform + * device name registered for the client, + * it should match the name of the associated + * driver + */ + unsigned id; /* id for mddi client device node, will also + * be used as device id of panel devices, if + * the client device will have multiple panels + * space must be left here for them + */ + void *client_data; /* required private client data */ + unsigned int clk_rate; /* optional: if the client requires a + * different mddi clk rate + */ + } client_platform_data[]; +}; + +struct mdp_blit_req; +struct fb_info; +struct mdp_device { + struct device dev; + void (*dma)(struct mdp_device *mpd, uint32_t addr, + uint32_t stride, uint32_t w, uint32_t h, uint32_t x, + uint32_t y, struct msmfb_callback *callback, int interface); + void (*dma_wait)(struct mdp_device *mdp); + int (*blit)(struct mdp_device *mdp, struct fb_info *fb, + struct mdp_blit_req *req); + void (*set_grp_disp)(struct mdp_device *mdp, uint32_t disp_id); +}; + +struct class_interface; +int register_mdp_client(struct class_interface *class_intf); + +/**** private client data structs go below this line ***/ + +struct msm_mddi_bridge_platform_data { + /* from board file */ + int (*init)(struct msm_mddi_bridge_platform_data *, + struct msm_mddi_client_data *); + int (*uninit)(struct msm_mddi_bridge_platform_data *, + struct msm_mddi_client_data *); + /* passed to panel for use by the fb driver */ + int (*blank)(struct msm_mddi_bridge_platform_data *, + struct msm_mddi_client_data *); + int (*unblank)(struct msm_mddi_bridge_platform_data *, + struct msm_mddi_client_data *); + struct msm_fb_data fb_data; +}; + + + +#endif diff --git a/kernel/include/linux/platform_data/video-mx3fb.h b/kernel/include/linux/platform_data/video-mx3fb.h new file mode 100644 index 000000000..fdbe60001 --- /dev/null +++ b/kernel/include/linux/platform_data/video-mx3fb.h @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MX3FB_H__ +#define __ASM_ARCH_MX3FB_H__ + +#include <linux/device.h> +#include <linux/fb.h> + +/* Proprietary FB_SYNC_ flags */ +#define FB_SYNC_OE_ACT_HIGH 0x80000000 +#define FB_SYNC_CLK_INVERT 0x40000000 +#define FB_SYNC_DATA_INVERT 0x20000000 +#define FB_SYNC_CLK_IDLE_EN 0x10000000 +#define FB_SYNC_SHARP_MODE 0x08000000 +#define FB_SYNC_SWAP_RGB 0x04000000 +#define FB_SYNC_CLK_SEL_EN 0x02000000 + +/* + * Specify the way your display is connected. The IPU can arbitrarily + * map the internal colors to the external data lines. We only support + * the following mappings at the moment. + */ +enum disp_data_mapping { + /* blue -> d[0..5], green -> d[6..11], red -> d[12..17] */ + IPU_DISP_DATA_MAPPING_RGB666, + /* blue -> d[0..4], green -> d[5..10], red -> d[11..15] */ + IPU_DISP_DATA_MAPPING_RGB565, + /* blue -> d[0..7], green -> d[8..15], red -> d[16..23] */ + IPU_DISP_DATA_MAPPING_RGB888, +}; + +/** + * struct mx3fb_platform_data - mx3fb platform data + * + * @dma_dev: pointer to the dma-device, used for dma-slave connection + * @mode: pointer to a platform-provided per mxc_register_fb() videomode + */ +struct mx3fb_platform_data { + struct device *dma_dev; + const char *name; + const struct fb_videomode *mode; + int num_modes; + enum disp_data_mapping disp_data_fmt; +}; + +#endif diff --git a/kernel/include/linux/platform_data/video-nuc900fb.h b/kernel/include/linux/platform_data/video-nuc900fb.h new file mode 100644 index 000000000..cec5ece76 --- /dev/null +++ b/kernel/include/linux/platform_data/video-nuc900fb.h @@ -0,0 +1,83 @@ +/* linux/include/asm/arch-nuc900/fb.h + * + * Copyright (c) 2008 Nuvoton technology corporation + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Changelog: + * + * 2008/08/26 vincen.zswan modify this file for LCD. + */ + +#ifndef __ASM_ARM_FB_H +#define __ASM_ARM_FB_H + + + +/* LCD Controller Hardware Desc */ +struct nuc900fb_hw { + unsigned int lcd_dccs; + unsigned int lcd_device_ctrl; + unsigned int lcd_mpulcd_cmd; + unsigned int lcd_int_cs; + unsigned int lcd_crtc_size; + unsigned int lcd_crtc_dend; + unsigned int lcd_crtc_hr; + unsigned int lcd_crtc_hsync; + unsigned int lcd_crtc_vr; + unsigned int lcd_va_baddr0; + unsigned int lcd_va_baddr1; + unsigned int lcd_va_fbctrl; + unsigned int lcd_va_scale; + unsigned int lcd_va_test; + unsigned int lcd_va_win; + unsigned int lcd_va_stuff; +}; + +/* LCD Display Description */ +struct nuc900fb_display { + /* LCD Image type */ + unsigned type; + + /* LCD Screen Size */ + unsigned short width; + unsigned short height; + + /* LCD Screen Info */ + unsigned short xres; + unsigned short yres; + unsigned short bpp; + + unsigned long pixclock; + unsigned short left_margin; + unsigned short right_margin; + unsigned short hsync_len; + unsigned short upper_margin; + unsigned short lower_margin; + unsigned short vsync_len; + + /* hardware special register value */ + unsigned int dccs; + unsigned int devctl; + unsigned int fbctrl; + unsigned int scale; +}; + +struct nuc900fb_mach_info { + struct nuc900fb_display *displays; + unsigned num_displays; + unsigned default_display; + /* GPIO Setting Info */ + unsigned gpio_dir; + unsigned gpio_dir_mask; + unsigned gpio_data; + unsigned gpio_data_mask; +}; + +extern void __init nuc900_fb_set_platdata(struct nuc900fb_mach_info *); + +#endif /* __ASM_ARM_FB_H */ diff --git a/kernel/include/linux/platform_data/video-pxafb.h b/kernel/include/linux/platform_data/video-pxafb.h new file mode 100644 index 000000000..07c6c1e15 --- /dev/null +++ b/kernel/include/linux/platform_data/video-pxafb.h @@ -0,0 +1,173 @@ +/* + * Support for the xscale frame buffer. + * + * Author: Jean-Frederic Clere + * Created: Sep 22, 2003 + * Copyright: jfclere@sinix.net + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/fb.h> +#include <mach/regs-lcd.h> + +/* + * Supported LCD connections + * + * bits 0 - 3: for LCD panel type: + * + * STN - for passive matrix + * DSTN - for dual scan passive matrix + * TFT - for active matrix + * + * bits 4 - 9 : for bus width + * bits 10-17 : for AC Bias Pin Frequency + * bit 18 : for output enable polarity + * bit 19 : for pixel clock edge + * bit 20 : for output pixel format when base is RGBT16 + */ +#define LCD_CONN_TYPE(_x) ((_x) & 0x0f) +#define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f) + +#define LCD_TYPE_MASK 0xf +#define LCD_TYPE_UNKNOWN 0 +#define LCD_TYPE_MONO_STN 1 +#define LCD_TYPE_MONO_DSTN 2 +#define LCD_TYPE_COLOR_STN 3 +#define LCD_TYPE_COLOR_DSTN 4 +#define LCD_TYPE_COLOR_TFT 5 +#define LCD_TYPE_SMART_PANEL 6 +#define LCD_TYPE_MAX 7 + +#define LCD_MONO_STN_4BPP ((4 << 4) | LCD_TYPE_MONO_STN) +#define LCD_MONO_STN_8BPP ((8 << 4) | LCD_TYPE_MONO_STN) +#define LCD_MONO_DSTN_8BPP ((8 << 4) | LCD_TYPE_MONO_DSTN) +#define LCD_COLOR_STN_8BPP ((8 << 4) | LCD_TYPE_COLOR_STN) +#define LCD_COLOR_DSTN_16BPP ((16 << 4) | LCD_TYPE_COLOR_DSTN) +#define LCD_COLOR_TFT_8BPP ((8 << 4) | LCD_TYPE_COLOR_TFT) +#define LCD_COLOR_TFT_16BPP ((16 << 4) | LCD_TYPE_COLOR_TFT) +#define LCD_COLOR_TFT_18BPP ((18 << 4) | LCD_TYPE_COLOR_TFT) +#define LCD_SMART_PANEL_8BPP ((8 << 4) | LCD_TYPE_SMART_PANEL) +#define LCD_SMART_PANEL_16BPP ((16 << 4) | LCD_TYPE_SMART_PANEL) +#define LCD_SMART_PANEL_18BPP ((18 << 4) | LCD_TYPE_SMART_PANEL) + +#define LCD_AC_BIAS_FREQ(x) (((x) & 0xff) << 10) +#define LCD_BIAS_ACTIVE_HIGH (0 << 18) +#define LCD_BIAS_ACTIVE_LOW (1 << 18) +#define LCD_PCLK_EDGE_RISE (0 << 19) +#define LCD_PCLK_EDGE_FALL (1 << 19) +#define LCD_ALTERNATE_MAPPING (1 << 20) + +/* + * This structure describes the machine which we are running on. + * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine + * of linux/drivers/video/pxafb.c + */ +struct pxafb_mode_info { + u_long pixclock; + + u_short xres; + u_short yres; + + u_char bpp; + u_int cmap_greyscale:1, + depth:8, + transparency:1, + unused:22; + + /* Parallel Mode Timing */ + u_char hsync_len; + u_char left_margin; + u_char right_margin; + + u_char vsync_len; + u_char upper_margin; + u_char lower_margin; + u_char sync; + + /* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details + * Note: + * 1. all parameters in nanosecond (ns) + * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits + * in pxa27x and pxa3xx, initialize them to the same value or + * the larger one will be used + * 3. same to {rd,wr}_pulse_width + * + * 4. LCD_PCLK_EDGE_{RISE,FALL} controls the L_PCLK_WR polarity + * 5. sync & FB_SYNC_HOR_HIGH_ACT controls the L_LCLK_A0 + * 6. sync & FB_SYNC_VERT_HIGH_ACT controls the L_LCLK_RD + */ + unsigned a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */ + unsigned a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */ + unsigned wr_pulse_width; /* L_PCLK_WR pulse width */ + unsigned rd_pulse_width; /* L_FCLK_RD pulse width */ + unsigned cmd_inh_time; /* Command Inhibit time between two writes */ + unsigned op_hold_time; /* Output Hold time from L_FCLK_RD negation */ +}; + +struct pxafb_mach_info { + struct pxafb_mode_info *modes; + unsigned int num_modes; + + unsigned int lcd_conn; + unsigned long video_mem_size; + + u_int fixed_modes:1, + cmap_inverse:1, + cmap_static:1, + acceleration_enabled:1, + unused:28; + + /* The following should be defined in LCCR0 + * LCCR0_Act or LCCR0_Pas Active or Passive + * LCCR0_Sngl or LCCR0_Dual Single/Dual panel + * LCCR0_Mono or LCCR0_Color Mono/Color + * LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode) + * LCCR0_DMADel(Tcpu) (optional) DMA request delay + * + * The following should not be defined in LCCR0: + * LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM + * LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB + */ + u_int lccr0; + /* The following should be defined in LCCR3 + * LCCR3_OutEnH or LCCR3_OutEnL Output enable polarity + * LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type + * LCCR3_Acb(X) AB Bias pin frequency + * LCCR3_DPC (optional) Double Pixel Clock mode (untested) + * + * The following should not be defined in LCCR3 + * LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp + */ + u_int lccr3; + /* The following should be defined in LCCR4 + * LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2 + * + * All other bits in LCCR4 should be left alone. + */ + u_int lccr4; + void (*pxafb_backlight_power)(int); + void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *); + void (*smart_update)(struct fb_info *); +}; + +void pxa_set_fb_info(struct device *, struct pxafb_mach_info *); +unsigned long pxafb_get_hsync_time(struct device *dev); + +#ifdef CONFIG_FB_PXA_SMARTPANEL +extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int); +extern int pxafb_smart_flush(struct fb_info *info); +#else +static inline int pxafb_smart_queue(struct fb_info *info, + uint16_t *cmds, int n) +{ + return 0; +} + +static inline int pxafb_smart_flush(struct fb_info *info) +{ + return 0; +} +#endif diff --git a/kernel/include/linux/platform_data/video_s3c.h b/kernel/include/linux/platform_data/video_s3c.h new file mode 100644 index 000000000..48883995f --- /dev/null +++ b/kernel/include/linux/platform_data/video_s3c.h @@ -0,0 +1,54 @@ +#ifndef __PLATFORM_DATA_VIDEO_S3C +#define __PLATFORM_DATA_VIDEO_S3C + +/* S3C_FB_MAX_WIN + * Set to the maximum number of windows that any of the supported hardware + * can use. Since the platform data uses this for an array size, having it + * set to the maximum of any version of the hardware can do is safe. + */ +#define S3C_FB_MAX_WIN (5) + +/** + * struct s3c_fb_pd_win - per window setup data + * @xres : The window X size. + * @yres : The window Y size. + * @virtual_x: The virtual X size. + * @virtual_y: The virtual Y size. + */ +struct s3c_fb_pd_win { + unsigned short default_bpp; + unsigned short max_bpp; + unsigned short xres; + unsigned short yres; + unsigned short virtual_x; + unsigned short virtual_y; +}; + +/** + * struct s3c_fb_platdata - S3C driver platform specific information + * @setup_gpio: Setup the external GPIO pins to the right state to transfer + * the data from the display system to the connected display + * device. + * @vidcon0: The base vidcon0 values to control the panel data format. + * @vidcon1: The base vidcon1 values to control the panel data output. + * @vtiming: Video timing when connected to a RGB type panel. + * @win: The setup data for each hardware window, or NULL for unused. + * @display_mode: The LCD output display mode. + * + * The platform data supplies the video driver with all the information + * it requires to work with the display(s) attached to the machine. It + * controls the initial mode, the number of display windows (0 is always + * the base framebuffer) that are initialised etc. + * + */ +struct s3c_fb_platdata { + void (*setup_gpio)(void); + + struct s3c_fb_pd_win *win[S3C_FB_MAX_WIN]; + struct fb_videomode *vtiming; + + u32 vidcon0; + u32 vidcon1; +}; + +#endif diff --git a/kernel/include/linux/platform_data/voltage-omap.h b/kernel/include/linux/platform_data/voltage-omap.h new file mode 100644 index 000000000..5be4d5def --- /dev/null +++ b/kernel/include/linux/platform_data/voltage-omap.h @@ -0,0 +1,39 @@ +/* + * OMAP Voltage Management Routines + * + * Copyright (C) 2011, Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_OMAP_VOLTAGE_H +#define __ARCH_ARM_OMAP_VOLTAGE_H + +/** + * struct omap_volt_data - Omap voltage specific data. + * @voltage_nominal: The possible voltage value in uV + * @sr_efuse_offs: The offset of the efuse register(from system + * control module base address) from where to read + * the n-target value for the smartreflex module. + * @sr_errminlimit: Error min limit value for smartreflex. This value + * differs at differnet opp and thus is linked + * with voltage. + * @vp_errorgain: Error gain value for the voltage processor. This + * field also differs according to the voltage/opp. + */ +struct omap_volt_data { + u32 volt_nominal; + u32 sr_efuse_offs; + u8 sr_errminlimit; + u8 vp_errgain; +}; +struct voltagedomain; + +struct voltagedomain *voltdm_lookup(const char *name); +int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt); +unsigned long voltdm_get_voltage(struct voltagedomain *voltdm); +struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, + unsigned long volt); +#endif diff --git a/kernel/include/linux/platform_data/wiznet.h b/kernel/include/linux/platform_data/wiznet.h new file mode 100644 index 000000000..b5d8c192d --- /dev/null +++ b/kernel/include/linux/platform_data/wiznet.h @@ -0,0 +1,24 @@ +/* + * Ethernet driver for the WIZnet W5x00 chip. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef PLATFORM_DATA_WIZNET_H +#define PLATFORM_DATA_WIZNET_H + +#include <linux/if_ether.h> + +struct wiznet_platform_data { + int link_gpio; + u8 mac_addr[ETH_ALEN]; +}; + +#ifndef CONFIG_WIZNET_BUS_SHIFT +#define CONFIG_WIZNET_BUS_SHIFT 0 +#endif + +#define W5100_BUS_DIRECT_SIZE (0x8000 << CONFIG_WIZNET_BUS_SHIFT) +#define W5300_BUS_DIRECT_SIZE (0x0400 << CONFIG_WIZNET_BUS_SHIFT) + +#endif /* PLATFORM_DATA_WIZNET_H */ diff --git a/kernel/include/linux/platform_data/zforce_ts.h b/kernel/include/linux/platform_data/zforce_ts.h new file mode 100644 index 000000000..0472ab2f6 --- /dev/null +++ b/kernel/include/linux/platform_data/zforce_ts.h @@ -0,0 +1,26 @@ +/* drivers/input/touchscreen/zforce.c + * + * Copyright (C) 2012-2013 MundoReader S.L. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _LINUX_INPUT_ZFORCE_TS_H +#define _LINUX_INPUT_ZFORCE_TS_H + +struct zforce_ts_platdata { + int gpio_int; + int gpio_rst; + + unsigned int x_max; + unsigned int y_max; +}; + +#endif /* _LINUX_INPUT_ZFORCE_TS_H */ |