diff options
Diffstat (limited to 'kernel/include/linux/platform_data/brcmfmac-sdio.h')
| -rw-r--r-- | kernel/include/linux/platform_data/brcmfmac-sdio.h | 135 |
1 files changed, 135 insertions, 0 deletions
diff --git a/kernel/include/linux/platform_data/brcmfmac-sdio.h b/kernel/include/linux/platform_data/brcmfmac-sdio.h new file mode 100644 index 000000000..e75dcbf2b --- /dev/null +++ b/kernel/include/linux/platform_data/brcmfmac-sdio.h @@ -0,0 +1,135 @@ +/* + * Copyright (c) 2013 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _LINUX_BRCMFMAC_PLATFORM_H +#define _LINUX_BRCMFMAC_PLATFORM_H + +/* + * Platform specific driver functions and data. Through the platform specific + * device data functions can be provided to help the brcmfmac driver to + * operate with the device in combination with the used platform. + * + * Use the platform data in the following (similar) way: + * + * +#include <brcmfmac_platform.h> + + +static void brcmfmac_power_on(void) +{ +} + +static void brcmfmac_power_off(void) +{ +} + +static void brcmfmac_reset(void) +{ +} + +static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = { + .power_on = brcmfmac_power_on, + .power_off = brcmfmac_power_off, + .reset = brcmfmac_reset +}; + +static struct platform_device brcmfmac_device = { + .name = BRCMFMAC_SDIO_PDATA_NAME, + .id = PLATFORM_DEVID_NONE, + .dev.platform_data = &brcmfmac_sdio_pdata +}; + +void __init brcmfmac_init_pdata(void) +{ + brcmfmac_sdio_pdata.oob_irq_supported = true; + brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB); + brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ | + IORESOURCE_IRQ_HIGHLEVEL; + platform_device_register(&brcmfmac_device); +} + * + * + * Note: the brcmfmac can be loaded as module or be statically built-in into + * the kernel. If built-in then do note that it uses module_init (and + * module_exit) routines which equal device_initcall. So if you intend to + * create a module with the platform specific data for the brcmfmac and have + * it built-in to the kernel then use a higher initcall then device_initcall + * (see init.h). If this is not done then brcmfmac will load without problems + * but will not pickup the platform data. + * + * When the driver does not "detect" platform driver data then it will continue + * without reporting anything and just assume there is no data needed. Which is + * probably true for most platforms. + * + * Explanation of the platform_data fields: + * + * drive_strength: is the preferred drive_strength to be used for the SDIO + * pins. If 0 then a default value will be used. This is the target drive + * strength, the exact drive strength which will be used depends on the + * capabilities of the device. + * + * oob_irq_supported: does the board have support for OOB interrupts. SDIO + * in-band interrupts are relatively slow and for having less overhead on + * interrupt processing an out of band interrupt can be used. If the HW + * supports this then enable this by setting this field to true and configure + * the oob related fields. + * + * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are + * used for registering the irq using request_irq function. + * + * broken_sg_support: flag for broken sg list support of SDIO host controller. + * Set this to true if the SDIO host controller has higher align requirement + * than 32 bytes for each scatterlist item. + * + * sd_head_align: alignment requirement for start of data buffer + * + * sd_sgentry_align: length alignment requirement for each sg entry + * + * power_on: This function is called by the brcmfmac when the module gets + * loaded. This can be particularly useful for low power devices. The platform + * spcific routine may for example decide to power up the complete device. + * If there is no use-case for this function then provide NULL. + * + * power_off: This function is called by the brcmfmac when the module gets + * unloaded. At this point the device can be powered down or otherwise be reset. + * So if an actual power_off is not supported but reset is then reset the device + * when this function gets called. This can be particularly useful for low power + * devices. If there is no use-case for this function (either power-down or + * reset) then provide NULL. + * + * reset: This function can get called if the device communication broke down. + * This functionality is particularly useful in case of SDIO type devices. It is + * possible to reset a dongle via sdio data interface, but it requires that + * this is fully functional. This function is chip/module specific and this + * function should return only after the complete reset has completed. + */ + +#define BRCMFMAC_SDIO_PDATA_NAME "brcmfmac_sdio" + +struct brcmfmac_sdio_platform_data { + unsigned int drive_strength; + bool oob_irq_supported; + unsigned int oob_irq_nr; + unsigned long oob_irq_flags; + bool broken_sg_support; + unsigned short sd_head_align; + unsigned short sd_sgentry_align; + void (*power_on)(void); + void (*power_off)(void); + void (*reset)(void); +}; + +#endif /* _LINUX_BRCMFMAC_PLATFORM_H */ |