diff options
Diffstat (limited to 'kernel/include/linux/mfd/db8500-prcmu.h')
| -rw-r--r-- | kernel/include/linux/mfd/db8500-prcmu.h | 772 |
1 files changed, 772 insertions, 0 deletions
diff --git a/kernel/include/linux/mfd/db8500-prcmu.h b/kernel/include/linux/mfd/db8500-prcmu.h new file mode 100644 index 000000000..0bd69446b --- /dev/null +++ b/kernel/include/linux/mfd/db8500-prcmu.h @@ -0,0 +1,772 @@ +/* + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com> + * + * PRCMU f/w APIs + */ +#ifndef __MFD_DB8500_PRCMU_H +#define __MFD_DB8500_PRCMU_H + +#include <linux/interrupt.h> +#include <linux/bitops.h> + +/* + * Registers + */ +#define DB8500_PRCM_LINE_VALUE 0x170 +#define DB8500_PRCM_LINE_VALUE_HSI_CAWAKE0 BIT(3) + +#define DB8500_PRCM_DSI_SW_RESET 0x324 +#define DB8500_PRCM_DSI_SW_RESET_DSI0_SW_RESETN BIT(0) +#define DB8500_PRCM_DSI_SW_RESET_DSI1_SW_RESETN BIT(1) +#define DB8500_PRCM_DSI_SW_RESET_DSI2_SW_RESETN BIT(2) + +/* This portion previously known as <mach/prcmu-fw-defs_v1.h> */ + +/** + * enum state - ON/OFF state definition + * @OFF: State is ON + * @ON: State is OFF + * + */ +enum state { + OFF = 0x0, + ON = 0x1, +}; + +/** + * enum ret_state - general purpose On/Off/Retention states + * + */ +enum ret_state { + OFFST = 0, + ONST = 1, + RETST = 2 +}; + +/** + * enum clk_arm - ARM Cortex A9 clock schemes + * @A9_OFF: + * @A9_BOOT: + * @A9_OPPT1: + * @A9_OPPT2: + * @A9_EXTCLK: + */ +enum clk_arm { + A9_OFF, + A9_BOOT, + A9_OPPT1, + A9_OPPT2, + A9_EXTCLK +}; + +/** + * enum clk_gen - GEN#0/GEN#1 clock schemes + * @GEN_OFF: + * @GEN_BOOT: + * @GEN_OPPT1: + */ +enum clk_gen { + GEN_OFF, + GEN_BOOT, + GEN_OPPT1, +}; + +/* some information between arm and xp70 */ + +/** + * enum romcode_write - Romcode message written by A9 AND read by XP70 + * @RDY_2_DS: Value set when ApDeepSleep state can be executed by XP70 + * @RDY_2_XP70_RST: Value set when 0x0F has been successfully polled by the + * romcode. The xp70 will go into self-reset + */ +enum romcode_write { + RDY_2_DS = 0x09, + RDY_2_XP70_RST = 0x10 +}; + +/** + * enum romcode_read - Romcode message written by XP70 and read by A9 + * @INIT: Init value when romcode field is not used + * @FS_2_DS: Value set when power state is going from ApExecute to + * ApDeepSleep + * @END_DS: Value set when ApDeepSleep power state is reached coming from + * ApExecute state + * @DS_TO_FS: Value set when power state is going from ApDeepSleep to + * ApExecute + * @END_FS: Value set when ApExecute power state is reached coming from + * ApDeepSleep state + * @SWR: Value set when power state is going to ApReset + * @END_SWR: Value set when the xp70 finished executing ApReset actions and + * waits for romcode acknowledgment to go to self-reset + */ +enum romcode_read { + INIT = 0x00, + FS_2_DS = 0x0A, + END_DS = 0x0B, + DS_TO_FS = 0x0C, + END_FS = 0x0D, + SWR = 0x0E, + END_SWR = 0x0F +}; + +/** + * enum ap_pwrst - current power states defined in PRCMU firmware + * @NO_PWRST: Current power state init + * @AP_BOOT: Current power state is apBoot + * @AP_EXECUTE: Current power state is apExecute + * @AP_DEEP_SLEEP: Current power state is apDeepSleep + * @AP_SLEEP: Current power state is apSleep + * @AP_IDLE: Current power state is apIdle + * @AP_RESET: Current power state is apReset + */ +enum ap_pwrst { + NO_PWRST = 0x00, + AP_BOOT = 0x01, + AP_EXECUTE = 0x02, + AP_DEEP_SLEEP = 0x03, + AP_SLEEP = 0x04, + AP_IDLE = 0x05, + AP_RESET = 0x06 +}; + +/** + * enum ap_pwrst_trans - Transition states defined in PRCMU firmware + * @NO_TRANSITION: No power state transition + * @APEXECUTE_TO_APSLEEP: Power state transition from ApExecute to ApSleep + * @APIDLE_TO_APSLEEP: Power state transition from ApIdle to ApSleep + * @APBOOT_TO_APEXECUTE: Power state transition from ApBoot to ApExecute + * @APEXECUTE_TO_APDEEPSLEEP: Power state transition from ApExecute to + * ApDeepSleep + * @APEXECUTE_TO_APIDLE: Power state transition from ApExecute to ApIdle + */ +enum ap_pwrst_trans { + PRCMU_AP_NO_CHANGE = 0x00, + APEXECUTE_TO_APSLEEP = 0x01, + APIDLE_TO_APSLEEP = 0x02, /* To be removed */ + PRCMU_AP_SLEEP = 0x01, + APBOOT_TO_APEXECUTE = 0x03, + APEXECUTE_TO_APDEEPSLEEP = 0x04, /* To be removed */ + PRCMU_AP_DEEP_SLEEP = 0x04, + APEXECUTE_TO_APIDLE = 0x05, /* To be removed */ + PRCMU_AP_IDLE = 0x05, + PRCMU_AP_DEEP_IDLE = 0x07, +}; + +/** + * enum hw_acc_state - State definition for hardware accelerator + * @HW_NO_CHANGE: The hardware accelerator state must remain unchanged + * @HW_OFF: The hardware accelerator must be switched off + * @HW_OFF_RAMRET: The hardware accelerator must be switched off with its + * internal RAM in retention + * @HW_ON: The hwa hardware accelerator hwa must be switched on + * + * NOTE! Deprecated, to be removed when all users switched over to use the + * regulator API. + */ +enum hw_acc_state { + HW_NO_CHANGE = 0x00, + HW_OFF = 0x01, + HW_OFF_RAMRET = 0x02, + HW_ON = 0x04 +}; + +/** + * enum mbox_2_arm_stat - Status messages definition for mbox_arm + * @BOOT_TO_EXECUTEOK: The apBoot to apExecute state transition has been + * completed + * @DEEPSLEEPOK: The apExecute to apDeepSleep state transition has been + * completed + * @SLEEPOK: The apExecute to apSleep state transition has been completed + * @IDLEOK: The apExecute to apIdle state transition has been completed + * @SOFTRESETOK: The A9 watchdog/ SoftReset state has been completed + * @SOFTRESETGO : The A9 watchdog/SoftReset state is on going + * @BOOT_TO_EXECUTE: The apBoot to apExecute state transition is on going + * @EXECUTE_TO_DEEPSLEEP: The apExecute to apDeepSleep state transition is on + * going + * @DEEPSLEEP_TO_EXECUTE: The apDeepSleep to apExecute state transition is on + * going + * @DEEPSLEEP_TO_EXECUTEOK: The apDeepSleep to apExecute state transition has + * been completed + * @EXECUTE_TO_SLEEP: The apExecute to apSleep state transition is on going + * @SLEEP_TO_EXECUTE: The apSleep to apExecute state transition is on going + * @SLEEP_TO_EXECUTEOK: The apSleep to apExecute state transition has been + * completed + * @EXECUTE_TO_IDLE: The apExecute to apIdle state transition is on going + * @IDLE_TO_EXECUTE: The apIdle to apExecute state transition is on going + * @IDLE_TO_EXECUTEOK: The apIdle to apExecute state transition has been + * completed + * @INIT_STATUS: Status init + */ +enum ap_pwrsttr_status { + BOOT_TO_EXECUTEOK = 0xFF, + DEEPSLEEPOK = 0xFE, + SLEEPOK = 0xFD, + IDLEOK = 0xFC, + SOFTRESETOK = 0xFB, + SOFTRESETGO = 0xFA, + BOOT_TO_EXECUTE = 0xF9, + EXECUTE_TO_DEEPSLEEP = 0xF8, + DEEPSLEEP_TO_EXECUTE = 0xF7, + DEEPSLEEP_TO_EXECUTEOK = 0xF6, + EXECUTE_TO_SLEEP = 0xF5, + SLEEP_TO_EXECUTE = 0xF4, + SLEEP_TO_EXECUTEOK = 0xF3, + EXECUTE_TO_IDLE = 0xF2, + IDLE_TO_EXECUTE = 0xF1, + IDLE_TO_EXECUTEOK = 0xF0, + RDYTODS_RETURNTOEXE = 0xEF, + NORDYTODS_RETURNTOEXE = 0xEE, + EXETOSLEEP_RETURNTOEXE = 0xED, + EXETOIDLE_RETURNTOEXE = 0xEC, + INIT_STATUS = 0xEB, + + /*error messages */ + INITERROR = 0x00, + PLLARMLOCKP_ER = 0x01, + PLLDDRLOCKP_ER = 0x02, + PLLSOCLOCKP_ER = 0x03, + PLLSOCK1LOCKP_ER = 0x04, + ARMWFI_ER = 0x05, + SYSCLKOK_ER = 0x06, + I2C_NACK_DATA_ER = 0x07, + BOOT_ER = 0x08, + I2C_STATUS_ALWAYS_1 = 0x0A, + I2C_NACK_REG_ADDR_ER = 0x0B, + I2C_NACK_DATA0123_ER = 0x1B, + I2C_NACK_ADDR_ER = 0x1F, + CURAPPWRSTISNOT_BOOT = 0x20, + CURAPPWRSTISNOT_EXECUTE = 0x21, + CURAPPWRSTISNOT_SLEEPMODE = 0x22, + CURAPPWRSTISNOT_CORRECTFORIT10 = 0x23, + FIFO4500WUISNOT_WUPEVENT = 0x24, + PLL32KLOCKP_ER = 0x29, + DDRDEEPSLEEPOK_ER = 0x2A, + ROMCODEREADY_ER = 0x50, + WUPBEFOREDS = 0x51, + DDRCONFIG_ER = 0x52, + WUPBEFORESLEEP = 0x53, + WUPBEFOREIDLE = 0x54 +}; /* earlier called as mbox_2_arm_stat */ + +/** + * enum dvfs_stat - DVFS status messages definition + * @DVFS_GO: A state transition DVFS is on going + * @DVFS_ARM100OPPOK: The state transition DVFS has been completed for 100OPP + * @DVFS_ARM50OPPOK: The state transition DVFS has been completed for 50OPP + * @DVFS_ARMEXTCLKOK: The state transition DVFS has been completed for EXTCLK + * @DVFS_NOCHGTCLKOK: The state transition DVFS has been completed for + * NOCHGCLK + * @DVFS_INITSTATUS: Value init + */ +enum dvfs_stat { + DVFS_GO = 0xFF, + DVFS_ARM100OPPOK = 0xFE, + DVFS_ARM50OPPOK = 0xFD, + DVFS_ARMEXTCLKOK = 0xFC, + DVFS_NOCHGTCLKOK = 0xFB, + DVFS_INITSTATUS = 0x00 +}; + +/** + * enum sva_mmdsp_stat - SVA MMDSP status messages + * @SVA_MMDSP_GO: SVAMMDSP interrupt has happened + * @SVA_MMDSP_INIT: Status init + */ +enum sva_mmdsp_stat { + SVA_MMDSP_GO = 0xFF, + SVA_MMDSP_INIT = 0x00 +}; + +/** + * enum sia_mmdsp_stat - SIA MMDSP status messages + * @SIA_MMDSP_GO: SIAMMDSP interrupt has happened + * @SIA_MMDSP_INIT: Status init + */ +enum sia_mmdsp_stat { + SIA_MMDSP_GO = 0xFF, + SIA_MMDSP_INIT = 0x00 +}; + +/** + * enum mbox_to_arm_err - Error messages definition + * @INIT_ERR: Init value + * @PLLARMLOCKP_ERR: PLLARM has not been correctly locked in given time + * @PLLDDRLOCKP_ERR: PLLDDR has not been correctly locked in the given time + * @PLLSOC0LOCKP_ERR: PLLSOC0 has not been correctly locked in the given time + * @PLLSOC1LOCKP_ERR: PLLSOC1 has not been correctly locked in the given time + * @ARMWFI_ERR: The ARM WFI has not been correctly executed in the given time + * @SYSCLKOK_ERR: The SYSCLK is not available in the given time + * @BOOT_ERR: Romcode has not validated the XP70 self reset in the given time + * @ROMCODESAVECONTEXT: The Romcode didn.t correctly save it secure context + * @VARMHIGHSPEEDVALTO_ERR: The ARM high speed supply value transfered + * through I2C has not been correctly executed in the given time + * @VARMHIGHSPEEDACCESS_ERR: The command value of VarmHighSpeedVal transfered + * through I2C has not been correctly executed in the given time + * @VARMLOWSPEEDVALTO_ERR:The ARM low speed supply value transfered through + * I2C has not been correctly executed in the given time + * @VARMLOWSPEEDACCESS_ERR: The command value of VarmLowSpeedVal transfered + * through I2C has not been correctly executed in the given time + * @VARMRETENTIONVALTO_ERR: The ARM retention supply value transfered through + * I2C has not been correctly executed in the given time + * @VARMRETENTIONACCESS_ERR: The command value of VarmRetentionVal transfered + * through I2C has not been correctly executed in the given time + * @VAPEHIGHSPEEDVALTO_ERR: The APE highspeed supply value transfered through + * I2C has not been correctly executed in the given time + * @VSAFEHPVALTO_ERR: The SAFE high power supply value transfered through I2C + * has not been correctly executed in the given time + * @VMODSEL1VALTO_ERR: The MODEM sel1 supply value transfered through I2C has + * not been correctly executed in the given time + * @VMODSEL2VALTO_ERR: The MODEM sel2 supply value transfered through I2C has + * not been correctly executed in the given time + * @VARMOFFACCESS_ERR: The command value of Varm ON/OFF transfered through + * I2C has not been correctly executed in the given time + * @VAPEOFFACCESS_ERR: The command value of Vape ON/OFF transfered through + * I2C has not been correctly executed in the given time + * @VARMRETACCES_ERR: The command value of Varm retention ON/OFF transfered + * through I2C has not been correctly executed in the given time + * @CURAPPWRSTISNOTBOOT:Generated when Arm want to do power state transition + * ApBoot to ApExecute but the power current state is not Apboot + * @CURAPPWRSTISNOTEXECUTE: Generated when Arm want to do power state + * transition from ApExecute to others power state but the + * power current state is not ApExecute + * @CURAPPWRSTISNOTSLEEPMODE: Generated when wake up events are transmitted + * but the power current state is not ApDeepSleep/ApSleep/ApIdle + * @CURAPPWRSTISNOTCORRECTDBG: Generated when wake up events are transmitted + * but the power current state is not correct + * @ARMREGU1VALTO_ERR:The ArmRegu1 value transferred through I2C has not + * been correctly executed in the given time + * @ARMREGU2VALTO_ERR: The ArmRegu2 value transferred through I2C has not + * been correctly executed in the given time + * @VAPEREGUVALTO_ERR: The VApeRegu value transfered through I2C has not + * been correctly executed in the given time + * @VSMPS3REGUVALTO_ERR: The VSmps3Regu value transfered through I2C has not + * been correctly executed in the given time + * @VMODREGUVALTO_ERR: The VModemRegu value transfered through I2C has not + * been correctly executed in the given time + */ +enum mbox_to_arm_err { + INIT_ERR = 0x00, + PLLARMLOCKP_ERR = 0x01, + PLLDDRLOCKP_ERR = 0x02, + PLLSOC0LOCKP_ERR = 0x03, + PLLSOC1LOCKP_ERR = 0x04, + ARMWFI_ERR = 0x05, + SYSCLKOK_ERR = 0x06, + BOOT_ERR = 0x07, + ROMCODESAVECONTEXT = 0x08, + VARMHIGHSPEEDVALTO_ERR = 0x10, + VARMHIGHSPEEDACCESS_ERR = 0x11, + VARMLOWSPEEDVALTO_ERR = 0x12, + VARMLOWSPEEDACCESS_ERR = 0x13, + VARMRETENTIONVALTO_ERR = 0x14, + VARMRETENTIONACCESS_ERR = 0x15, + VAPEHIGHSPEEDVALTO_ERR = 0x16, + VSAFEHPVALTO_ERR = 0x17, + VMODSEL1VALTO_ERR = 0x18, + VMODSEL2VALTO_ERR = 0x19, + VARMOFFACCESS_ERR = 0x1A, + VAPEOFFACCESS_ERR = 0x1B, + VARMRETACCES_ERR = 0x1C, + CURAPPWRSTISNOTBOOT = 0x20, + CURAPPWRSTISNOTEXECUTE = 0x21, + CURAPPWRSTISNOTSLEEPMODE = 0x22, + CURAPPWRSTISNOTCORRECTDBG = 0x23, + ARMREGU1VALTO_ERR = 0x24, + ARMREGU2VALTO_ERR = 0x25, + VAPEREGUVALTO_ERR = 0x26, + VSMPS3REGUVALTO_ERR = 0x27, + VMODREGUVALTO_ERR = 0x28 +}; + +enum hw_acc { + SVAMMDSP = 0, + SVAPIPE = 1, + SIAMMDSP = 2, + SIAPIPE = 3, + SGA = 4, + B2R2MCDE = 5, + ESRAM12 = 6, + ESRAM34 = 7, +}; + +enum cs_pwrmgt { + PWRDNCS0 = 0, + WKUPCS0 = 1, + PWRDNCS1 = 2, + WKUPCS1 = 3 +}; + +/* Defs related to autonomous power management */ + +/** + * enum sia_sva_pwr_policy - Power policy + * @NO_CHGT: No change + * @DSPOFF_HWPOFF: + * @DSPOFFRAMRET_HWPOFF: + * @DSPCLKOFF_HWPOFF: + * @DSPCLKOFF_HWPCLKOFF: + * + */ +enum sia_sva_pwr_policy { + NO_CHGT = 0x0, + DSPOFF_HWPOFF = 0x1, + DSPOFFRAMRET_HWPOFF = 0x2, + DSPCLKOFF_HWPOFF = 0x3, + DSPCLKOFF_HWPCLKOFF = 0x4, +}; + +/** + * enum auto_enable - Auto Power enable + * @AUTO_OFF: + * @AUTO_ON: + * + */ +enum auto_enable { + AUTO_OFF = 0x0, + AUTO_ON = 0x1, +}; + +/* End of file previously known as prcmu-fw-defs_v1.h */ + +/** + * enum prcmu_power_status - results from set_power_state + * @PRCMU_SLEEP_OK: Sleep went ok + * @PRCMU_DEEP_SLEEP_OK: DeepSleep went ok + * @PRCMU_IDLE_OK: Idle went ok + * @PRCMU_DEEPIDLE_OK: DeepIdle went ok + * @PRCMU_PRCMU2ARMPENDINGIT_ER: Pending interrupt detected + * @PRCMU_ARMPENDINGIT_ER: Pending interrupt detected + * + */ +enum prcmu_power_status { + PRCMU_SLEEP_OK = 0xf3, + PRCMU_DEEP_SLEEP_OK = 0xf6, + PRCMU_IDLE_OK = 0xf0, + PRCMU_DEEPIDLE_OK = 0xe3, + PRCMU_PRCMU2ARMPENDINGIT_ER = 0x91, + PRCMU_ARMPENDINGIT_ER = 0x93, +}; + +/* + * Definitions for autonomous power management configuration. + */ + +#define PRCMU_AUTO_PM_OFF 0 +#define PRCMU_AUTO_PM_ON 1 + +#define PRCMU_AUTO_PM_POWER_ON_HSEM BIT(0) +#define PRCMU_AUTO_PM_POWER_ON_ABB_FIFO_IT BIT(1) + +enum prcmu_auto_pm_policy { + PRCMU_AUTO_PM_POLICY_NO_CHANGE, + PRCMU_AUTO_PM_POLICY_DSP_OFF_HWP_OFF, + PRCMU_AUTO_PM_POLICY_DSP_OFF_RAMRET_HWP_OFF, + PRCMU_AUTO_PM_POLICY_DSP_CLK_OFF_HWP_OFF, + PRCMU_AUTO_PM_POLICY_DSP_CLK_OFF_HWP_CLK_OFF, +}; + +/** + * struct prcmu_auto_pm_config - Autonomous power management configuration. + * @sia_auto_pm_enable: SIA autonomous pm enable. (PRCMU_AUTO_PM_{OFF,ON}) + * @sia_power_on: SIA power ON enable. (PRCMU_AUTO_PM_POWER_ON_* bitmask) + * @sia_policy: SIA power policy. (enum prcmu_auto_pm_policy) + * @sva_auto_pm_enable: SVA autonomous pm enable. (PRCMU_AUTO_PM_{OFF,ON}) + * @sva_power_on: SVA power ON enable. (PRCMU_AUTO_PM_POWER_ON_* bitmask) + * @sva_policy: SVA power policy. (enum prcmu_auto_pm_policy) + */ +struct prcmu_auto_pm_config { + u8 sia_auto_pm_enable; + u8 sia_power_on; + u8 sia_policy; + u8 sva_auto_pm_enable; + u8 sva_power_on; + u8 sva_policy; +}; + +#ifdef CONFIG_MFD_DB8500_PRCMU + +void db8500_prcmu_early_init(u32 phy_base, u32 size); +int prcmu_set_rc_a2p(enum romcode_write); +enum romcode_read prcmu_get_rc_p2a(void); +enum ap_pwrst prcmu_get_xp70_current_state(void); +bool prcmu_has_arm_maxopp(void); +struct prcmu_fw_version *prcmu_get_fw_version(void); +int prcmu_release_usb_wakeup_state(void); +void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, + struct prcmu_auto_pm_config *idle); +bool prcmu_is_auto_pm_enabled(void); + +int prcmu_config_clkout(u8 clkout, u8 source, u8 div); +int prcmu_set_clock_divider(u8 clock, u8 divider); +int db8500_prcmu_config_hotdog(u8 threshold); +int db8500_prcmu_config_hotmon(u8 low, u8 high); +int db8500_prcmu_start_temp_sense(u16 cycles32k); +int db8500_prcmu_stop_temp_sense(void); +int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); +int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); + +int prcmu_ac_wake_req(void); +void prcmu_ac_sleep_req(void); +void db8500_prcmu_modem_reset(void); + +int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off); +int db8500_prcmu_enable_a9wdog(u8 id); +int db8500_prcmu_disable_a9wdog(u8 id); +int db8500_prcmu_kick_a9wdog(u8 id); +int db8500_prcmu_load_a9wdog(u8 id, u32 val); + +void db8500_prcmu_system_reset(u16 reset_code); +int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll); +u8 db8500_prcmu_get_power_state_result(void); +void db8500_prcmu_enable_wakeups(u32 wakeups); +int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state); +int db8500_prcmu_request_clock(u8 clock, bool enable); +int db8500_prcmu_set_display_clocks(void); +int db8500_prcmu_disable_dsipll(void); +int db8500_prcmu_enable_dsipll(void); +void db8500_prcmu_config_abb_event_readout(u32 abb_events); +void db8500_prcmu_get_abb_event_buffer(void __iomem **buf); +int db8500_prcmu_config_esram0_deep_sleep(u8 state); +u16 db8500_prcmu_get_reset_code(void); +bool db8500_prcmu_is_ac_wake_requested(void); +int db8500_prcmu_set_arm_opp(u8 opp); +int db8500_prcmu_get_arm_opp(void); +int db8500_prcmu_set_ape_opp(u8 opp); +int db8500_prcmu_get_ape_opp(void); +int db8500_prcmu_request_ape_opp_100_voltage(bool enable); +int db8500_prcmu_set_ddr_opp(u8 opp); +int db8500_prcmu_get_ddr_opp(void); + +u32 db8500_prcmu_read(unsigned int reg); +void db8500_prcmu_write(unsigned int reg, u32 value); +void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value); + +#else /* !CONFIG_MFD_DB8500_PRCMU */ + +static inline void db8500_prcmu_early_init(u32 phy_base, u32 size) {} + +static inline int prcmu_set_rc_a2p(enum romcode_write code) +{ + return 0; +} + +static inline enum romcode_read prcmu_get_rc_p2a(void) +{ + return INIT; +} + +static inline enum ap_pwrst prcmu_get_xp70_current_state(void) +{ + return AP_EXECUTE; +} + +static inline bool prcmu_has_arm_maxopp(void) +{ + return false; +} + +static inline struct prcmu_fw_version *prcmu_get_fw_version(void) +{ + return NULL; +} + +static inline int db8500_prcmu_set_ape_opp(u8 opp) +{ + return 0; +} + +static inline int db8500_prcmu_get_ape_opp(void) +{ + return APE_100_OPP; +} + +static inline int db8500_prcmu_request_ape_opp_100_voltage(bool enable) +{ + return 0; +} + +static inline int prcmu_release_usb_wakeup_state(void) +{ + return 0; +} + +static inline int db8500_prcmu_set_ddr_opp(u8 opp) +{ + return 0; +} + +static inline int db8500_prcmu_get_ddr_opp(void) +{ + return DDR_100_OPP; +} + +static inline void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep, + struct prcmu_auto_pm_config *idle) +{ +} + +static inline bool prcmu_is_auto_pm_enabled(void) +{ + return false; +} + +static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div) +{ + return 0; +} + +static inline int prcmu_set_clock_divider(u8 clock, u8 divider) +{ + return 0; +} + +static inline int db8500_prcmu_config_hotdog(u8 threshold) +{ + return 0; +} + +static inline int db8500_prcmu_config_hotmon(u8 low, u8 high) +{ + return 0; +} + +static inline int db8500_prcmu_start_temp_sense(u16 cycles32k) +{ + return 0; +} + +static inline int db8500_prcmu_stop_temp_sense(void) +{ + return 0; +} + +static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) +{ + return -ENOSYS; +} + +static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) +{ + return -ENOSYS; +} + +static inline int prcmu_ac_wake_req(void) +{ + return 0; +} + +static inline void prcmu_ac_sleep_req(void) {} + +static inline void db8500_prcmu_modem_reset(void) {} + +static inline void db8500_prcmu_system_reset(u16 reset_code) {} + +static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, + bool keep_ap_pll) +{ + return 0; +} + +static inline u8 db8500_prcmu_get_power_state_result(void) +{ + return 0; +} + +static inline void db8500_prcmu_enable_wakeups(u32 wakeups) {} + +static inline int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state) +{ + return 0; +} + +static inline int db8500_prcmu_request_clock(u8 clock, bool enable) +{ + return 0; +} + +static inline int db8500_prcmu_set_display_clocks(void) +{ + return 0; +} + +static inline int db8500_prcmu_disable_dsipll(void) +{ + return 0; +} + +static inline int db8500_prcmu_enable_dsipll(void) +{ + return 0; +} + +static inline int db8500_prcmu_config_esram0_deep_sleep(u8 state) +{ + return 0; +} + +static inline void db8500_prcmu_config_abb_event_readout(u32 abb_events) {} + +static inline void db8500_prcmu_get_abb_event_buffer(void __iomem **buf) {} + +static inline u16 db8500_prcmu_get_reset_code(void) +{ + return 0; +} + +static inline int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off) +{ + return 0; +} + +static inline int db8500_prcmu_enable_a9wdog(u8 id) +{ + return 0; +} + +static inline int db8500_prcmu_disable_a9wdog(u8 id) +{ + return 0; +} + +static inline int db8500_prcmu_kick_a9wdog(u8 id) +{ + return 0; +} + +static inline int db8500_prcmu_load_a9wdog(u8 id, u32 val) +{ + return 0; +} + +static inline bool db8500_prcmu_is_ac_wake_requested(void) +{ + return 0; +} + +static inline int db8500_prcmu_set_arm_opp(u8 opp) +{ + return 0; +} + +static inline int db8500_prcmu_get_arm_opp(void) +{ + return 0; +} + +static inline u32 db8500_prcmu_read(unsigned int reg) +{ + return 0; +} + +static inline void db8500_prcmu_write(unsigned int reg, u32 value) {} + +static inline void db8500_prcmu_write_masked(unsigned int reg, u32 mask, + u32 value) {} + +#endif /* !CONFIG_MFD_DB8500_PRCMU */ + +#endif /* __MFD_DB8500_PRCMU_H */ |