diff options
Diffstat (limited to 'kernel/include/linux/mfd/abx500')
| -rw-r--r-- | kernel/include/linux/mfd/abx500/ab8500-bm.h | 478 | ||||
| -rw-r--r-- | kernel/include/linux/mfd/abx500/ab8500-codec.h | 54 | ||||
| -rw-r--r-- | kernel/include/linux/mfd/abx500/ab8500-gpadc.h | 75 | ||||
| -rw-r--r-- | kernel/include/linux/mfd/abx500/ab8500-sysctrl.h | 307 | ||||
| -rw-r--r-- | kernel/include/linux/mfd/abx500/ab8500.h | 516 | ||||
| -rw-r--r-- | kernel/include/linux/mfd/abx500/ux500_chargalg.h | 55 |
6 files changed, 1485 insertions, 0 deletions
diff --git a/kernel/include/linux/mfd/abx500/ab8500-bm.h b/kernel/include/linux/mfd/abx500/ab8500-bm.h new file mode 100644 index 000000000..12a5b3969 --- /dev/null +++ b/kernel/include/linux/mfd/abx500/ab8500-bm.h @@ -0,0 +1,478 @@ +/* + * Copyright ST-Ericsson 2012. + * + * Author: Arun Murthy <arun.murthy@stericsson.com> + * Licensed under GPLv2. + */ + +#ifndef _AB8500_BM_H +#define _AB8500_BM_H + +#include <linux/kernel.h> +#include <linux/mfd/abx500.h> + +/* + * System control 2 register offsets. + * bank = 0x02 + */ +#define AB8500_MAIN_WDOG_CTRL_REG 0x01 +#define AB8500_LOW_BAT_REG 0x03 +#define AB8500_BATT_OK_REG 0x04 +/* + * USB/ULPI register offsets + * Bank : 0x5 + */ +#define AB8500_USB_LINE_STAT_REG 0x80 +#define AB8500_USB_LINE_CTRL2_REG 0x82 +#define AB8500_USB_LINK1_STAT_REG 0x94 + +/* + * Charger / status register offfsets + * Bank : 0x0B + */ +#define AB8500_CH_STATUS1_REG 0x00 +#define AB8500_CH_STATUS2_REG 0x01 +#define AB8500_CH_USBCH_STAT1_REG 0x02 +#define AB8500_CH_USBCH_STAT2_REG 0x03 +#define AB8540_CH_USBCH_STAT3_REG 0x04 +#define AB8500_CH_STAT_REG 0x05 + +/* + * Charger / control register offfsets + * Bank : 0x0B + */ +#define AB8500_CH_VOLT_LVL_REG 0x40 +#define AB8500_CH_VOLT_LVL_MAX_REG 0x41 /*Only in Cut2.0*/ +#define AB8500_CH_OPT_CRNTLVL_REG 0x42 +#define AB8500_CH_OPT_CRNTLVL_MAX_REG 0x43 /*Only in Cut2.0*/ +#define AB8500_CH_WD_TIMER_REG 0x50 +#define AB8500_CHARG_WD_CTRL 0x51 +#define AB8500_BTEMP_HIGH_TH 0x52 +#define AB8500_LED_INDICATOR_PWM_CTRL 0x53 +#define AB8500_LED_INDICATOR_PWM_DUTY 0x54 +#define AB8500_BATT_OVV 0x55 +#define AB8500_CHARGER_CTRL 0x56 +#define AB8500_BAT_CTRL_CURRENT_SOURCE 0x60 /*Only in Cut2.0*/ + +/* + * Charger / main control register offsets + * Bank : 0x0B + */ +#define AB8500_MCH_CTRL1 0x80 +#define AB8500_MCH_CTRL2 0x81 +#define AB8500_MCH_IPT_CURLVL_REG 0x82 +#define AB8500_CH_WD_REG 0x83 + +/* + * Charger / USB control register offsets + * Bank : 0x0B + */ +#define AB8500_USBCH_CTRL1_REG 0xC0 +#define AB8500_USBCH_CTRL2_REG 0xC1 +#define AB8500_USBCH_IPT_CRNTLVL_REG 0xC2 +#define AB8540_USB_PP_MODE_REG 0xC5 +#define AB8540_USB_PP_CHR_REG 0xC6 + +/* + * Gas Gauge register offsets + * Bank : 0x0C + */ +#define AB8500_GASG_CC_CTRL_REG 0x00 +#define AB8500_GASG_CC_ACCU1_REG 0x01 +#define AB8500_GASG_CC_ACCU2_REG 0x02 +#define AB8500_GASG_CC_ACCU3_REG 0x03 +#define AB8500_GASG_CC_ACCU4_REG 0x04 +#define AB8500_GASG_CC_SMPL_CNTRL_REG 0x05 +#define AB8500_GASG_CC_SMPL_CNTRH_REG 0x06 +#define AB8500_GASG_CC_SMPL_CNVL_REG 0x07 +#define AB8500_GASG_CC_SMPL_CNVH_REG 0x08 +#define AB8500_GASG_CC_CNTR_AVGOFF_REG 0x09 +#define AB8500_GASG_CC_OFFSET_REG 0x0A +#define AB8500_GASG_CC_NCOV_ACCU 0x10 +#define AB8500_GASG_CC_NCOV_ACCU_CTRL 0x11 +#define AB8500_GASG_CC_NCOV_ACCU_LOW 0x12 +#define AB8500_GASG_CC_NCOV_ACCU_MED 0x13 +#define AB8500_GASG_CC_NCOV_ACCU_HIGH 0x14 + +/* + * Interrupt register offsets + * Bank : 0x0E + */ +#define AB8500_IT_SOURCE2_REG 0x01 +#define AB8500_IT_SOURCE21_REG 0x14 + +/* + * RTC register offsets + * Bank: 0x0F + */ +#define AB8500_RTC_BACKUP_CHG_REG 0x0C +#define AB8500_RTC_CC_CONF_REG 0x01 +#define AB8500_RTC_CTRL_REG 0x0B +#define AB8500_RTC_CTRL1_REG 0x11 + +/* + * OTP register offsets + * Bank : 0x15 + */ +#define AB8500_OTP_CONF_15 0x0E + +/* GPADC constants from AB8500 spec, UM0836 */ +#define ADC_RESOLUTION 1024 +#define ADC_CH_MAIN_MIN 0 +#define ADC_CH_MAIN_MAX 20030 +#define ADC_CH_VBUS_MIN 0 +#define ADC_CH_VBUS_MAX 20030 +#define ADC_CH_VBAT_MIN 2300 +#define ADC_CH_VBAT_MAX 4800 +#define ADC_CH_BKBAT_MIN 0 +#define ADC_CH_BKBAT_MAX 3200 + +/* Main charge i/p current */ +#define MAIN_CH_IP_CUR_0P9A 0x80 +#define MAIN_CH_IP_CUR_1P0A 0x90 +#define MAIN_CH_IP_CUR_1P1A 0xA0 +#define MAIN_CH_IP_CUR_1P2A 0xB0 +#define MAIN_CH_IP_CUR_1P3A 0xC0 +#define MAIN_CH_IP_CUR_1P4A 0xD0 +#define MAIN_CH_IP_CUR_1P5A 0xE0 + +/* ChVoltLevel */ +#define CH_VOL_LVL_3P5 0x00 +#define CH_VOL_LVL_4P0 0x14 +#define CH_VOL_LVL_4P05 0x16 +#define CH_VOL_LVL_4P1 0x1B +#define CH_VOL_LVL_4P15 0x20 +#define CH_VOL_LVL_4P2 0x25 +#define CH_VOL_LVL_4P6 0x4D + +/* ChOutputCurrentLevel */ +#define CH_OP_CUR_LVL_0P1 0x00 +#define CH_OP_CUR_LVL_0P2 0x01 +#define CH_OP_CUR_LVL_0P3 0x02 +#define CH_OP_CUR_LVL_0P4 0x03 +#define CH_OP_CUR_LVL_0P5 0x04 +#define CH_OP_CUR_LVL_0P6 0x05 +#define CH_OP_CUR_LVL_0P7 0x06 +#define CH_OP_CUR_LVL_0P8 0x07 +#define CH_OP_CUR_LVL_0P9 0x08 +#define CH_OP_CUR_LVL_1P4 0x0D +#define CH_OP_CUR_LVL_1P5 0x0E +#define CH_OP_CUR_LVL_1P6 0x0F +#define CH_OP_CUR_LVL_2P 0x3F + +/* BTEMP High thermal limits */ +#define BTEMP_HIGH_TH_57_0 0x00 +#define BTEMP_HIGH_TH_52 0x01 +#define BTEMP_HIGH_TH_57_1 0x02 +#define BTEMP_HIGH_TH_62 0x03 + +/* current is mA */ +#define USB_0P1A 100 +#define USB_0P2A 200 +#define USB_0P3A 300 +#define USB_0P4A 400 +#define USB_0P5A 500 + +#define LOW_BAT_3P1V 0x20 +#define LOW_BAT_2P3V 0x00 +#define LOW_BAT_RESET 0x01 +#define LOW_BAT_ENABLE 0x01 + +/* Backup battery constants */ +#define BUP_ICH_SEL_50UA 0x00 +#define BUP_ICH_SEL_150UA 0x04 +#define BUP_ICH_SEL_300UA 0x08 +#define BUP_ICH_SEL_700UA 0x0C + +enum bup_vch_sel { + BUP_VCH_SEL_2P5V, + BUP_VCH_SEL_2P6V, + BUP_VCH_SEL_2P8V, + BUP_VCH_SEL_3P1V, + /* + * Note that the following 5 values 2.7v, 2.9v, 3.0v, 3.2v, 3.3v + * are only available on ab8540. You can't choose these 5 + * voltage on ab8500/ab8505/ab9540. + */ + BUP_VCH_SEL_2P7V, + BUP_VCH_SEL_2P9V, + BUP_VCH_SEL_3P0V, + BUP_VCH_SEL_3P2V, + BUP_VCH_SEL_3P3V, +}; + +#define BUP_VCH_RANGE 0x02 +#define VBUP33_VRTCN 0x01 + +/* Battery OVV constants */ +#define BATT_OVV_ENA 0x02 +#define BATT_OVV_TH_3P7 0x00 +#define BATT_OVV_TH_4P75 0x01 + +/* A value to indicate over voltage */ +#define BATT_OVV_VALUE 4750 + +/* VBUS OVV constants */ +#define VBUS_OVV_SELECT_MASK 0x78 +#define VBUS_OVV_SELECT_5P6V 0x00 +#define VBUS_OVV_SELECT_5P7V 0x08 +#define VBUS_OVV_SELECT_5P8V 0x10 +#define VBUS_OVV_SELECT_5P9V 0x18 +#define VBUS_OVV_SELECT_6P0V 0x20 +#define VBUS_OVV_SELECT_6P1V 0x28 +#define VBUS_OVV_SELECT_6P2V 0x30 +#define VBUS_OVV_SELECT_6P3V 0x38 + +#define VBUS_AUTO_IN_CURR_LIM_ENA 0x04 + +/* Fuel Gauge constants */ +#define RESET_ACCU 0x02 +#define READ_REQ 0x01 +#define CC_DEEP_SLEEP_ENA 0x02 +#define CC_PWR_UP_ENA 0x01 +#define CC_SAMPLES_40 0x28 +#define RD_NCONV_ACCU_REQ 0x01 +#define CC_CALIB 0x08 +#define CC_INTAVGOFFSET_ENA 0x10 +#define CC_MUXOFFSET 0x80 +#define CC_INT_CAL_N_AVG_MASK 0x60 +#define CC_INT_CAL_SAMPLES_16 0x40 +#define CC_INT_CAL_SAMPLES_8 0x20 +#define CC_INT_CAL_SAMPLES_4 0x00 + +/* RTC constants */ +#define RTC_BUP_CH_ENA 0x10 + +/* BatCtrl Current Source Constants */ +#define BAT_CTRL_7U_ENA 0x01 +#define BAT_CTRL_20U_ENA 0x02 +#define BAT_CTRL_18U_ENA 0x01 +#define BAT_CTRL_16U_ENA 0x02 +#define BAT_CTRL_60U_ENA 0x01 +#define BAT_CTRL_120U_ENA 0x02 +#define BAT_CTRL_CMP_ENA 0x04 +#define FORCE_BAT_CTRL_CMP_HIGH 0x08 +#define BAT_CTRL_PULL_UP_ENA 0x10 + +/* Battery type */ +#define BATTERY_UNKNOWN 00 + +/* Registers for pcut feature in ab8505 and ab9540 */ +#define AB8505_RTC_PCUT_CTL_STATUS_REG 0x12 +#define AB8505_RTC_PCUT_TIME_REG 0x13 +#define AB8505_RTC_PCUT_MAX_TIME_REG 0x14 +#define AB8505_RTC_PCUT_FLAG_TIME_REG 0x15 +#define AB8505_RTC_PCUT_RESTART_REG 0x16 +#define AB8505_RTC_PCUT_DEBOUNCE_REG 0x17 + +/* USB Power Path constants for ab8540 */ +#define BUS_VSYS_VOL_SELECT_MASK 0x06 +#define BUS_VSYS_VOL_SELECT_3P6V 0x00 +#define BUS_VSYS_VOL_SELECT_3P325V 0x02 +#define BUS_VSYS_VOL_SELECT_3P9V 0x04 +#define BUS_VSYS_VOL_SELECT_4P3V 0x06 +#define BUS_POWER_PATH_MODE_ENA 0x01 +#define BUS_PP_PRECHG_CURRENT_MASK 0x0E +#define BUS_POWER_PATH_PRECHG_ENA 0x01 + +/** + * struct res_to_temp - defines one point in a temp to res curve. To + * be used in battery packs that combines the identification resistor with a + * NTC resistor. + * @temp: battery pack temperature in Celcius + * @resist: NTC resistor net total resistance + */ +struct res_to_temp { + int temp; + int resist; +}; + +/** + * struct batres_vs_temp - defines one point in a temp vs battery internal + * resistance curve. + * @temp: battery pack temperature in Celcius + * @resist: battery internal reistance in mOhm + */ +struct batres_vs_temp { + int temp; + int resist; +}; + +/* Forward declaration */ +struct ab8500_fg; + +/** + * struct ab8500_fg_parameters - Fuel gauge algorithm parameters, in seconds + * if not specified + * @recovery_sleep_timer: Time between measurements while recovering + * @recovery_total_time: Total recovery time + * @init_timer: Measurement interval during startup + * @init_discard_time: Time we discard voltage measurement at startup + * @init_total_time: Total init time during startup + * @high_curr_time: Time current has to be high to go to recovery + * @accu_charging: FG accumulation time while charging + * @accu_high_curr: FG accumulation time in high current mode + * @high_curr_threshold: High current threshold, in mA + * @lowbat_threshold: Low battery threshold, in mV + * @battok_falling_th_sel0 Threshold in mV for battOk signal sel0 + * Resolution in 50 mV step. + * @battok_raising_th_sel1 Threshold in mV for battOk signal sel1 + * Resolution in 50 mV step. + * @user_cap_limit Capacity reported from user must be within this + * limit to be considered as sane, in percentage + * points. + * @maint_thres This is the threshold where we stop reporting + * battery full while in maintenance, in per cent + * @pcut_enable: Enable power cut feature in ab8505 + * @pcut_max_time: Max time threshold + * @pcut_flag_time: Flagtime threshold + * @pcut_max_restart: Max number of restarts + * @pcut_debunce_time: Sets battery debounce time + */ +struct ab8500_fg_parameters { + int recovery_sleep_timer; + int recovery_total_time; + int init_timer; + int init_discard_time; + int init_total_time; + int high_curr_time; + int accu_charging; + int accu_high_curr; + int high_curr_threshold; + int lowbat_threshold; + int battok_falling_th_sel0; + int battok_raising_th_sel1; + int user_cap_limit; + int maint_thres; + bool pcut_enable; + u8 pcut_max_time; + u8 pcut_flag_time; + u8 pcut_max_restart; + u8 pcut_debunce_time; +}; + +/** + * struct ab8500_charger_maximization - struct used by the board config. + * @use_maxi: Enable maximization for this battery type + * @maxi_chg_curr: Maximum charger current allowed + * @maxi_wait_cycles: cycles to wait before setting charger current + * @charger_curr_step delta between two charger current settings (mA) + */ +struct ab8500_maxim_parameters { + bool ena_maxi; + int chg_curr; + int wait_cycles; + int charger_curr_step; +}; + +/** + * struct ab8500_bm_capacity_levels - ab8500 capacity level data + * @critical: critical capacity level in percent + * @low: low capacity level in percent + * @normal: normal capacity level in percent + * @high: high capacity level in percent + * @full: full capacity level in percent + */ +struct ab8500_bm_capacity_levels { + int critical; + int low; + int normal; + int high; + int full; +}; + +/** + * struct ab8500_bm_charger_parameters - Charger specific parameters + * @usb_volt_max: maximum allowed USB charger voltage in mV + * @usb_curr_max: maximum allowed USB charger current in mA + * @ac_volt_max: maximum allowed AC charger voltage in mV + * @ac_curr_max: maximum allowed AC charger current in mA + */ +struct ab8500_bm_charger_parameters { + int usb_volt_max; + int usb_curr_max; + int ac_volt_max; + int ac_curr_max; +}; + +/** + * struct ab8500_bm_data - ab8500 battery management data + * @temp_under under this temp, charging is stopped + * @temp_low between this temp and temp_under charging is reduced + * @temp_high between this temp and temp_over charging is reduced + * @temp_over over this temp, charging is stopped + * @temp_interval_chg temperature measurement interval in s when charging + * @temp_interval_nochg temperature measurement interval in s when not charging + * @main_safety_tmr_h safety timer for main charger + * @usb_safety_tmr_h safety timer for usb charger + * @bkup_bat_v voltage which we charge the backup battery with + * @bkup_bat_i current which we charge the backup battery with + * @no_maintenance indicates that maintenance charging is disabled + * @capacity_scaling indicates whether capacity scaling is to be used + * @adc_therm placement of thermistor, batctrl or battemp adc + * @chg_unknown_bat flag to enable charging of unknown batteries + * @enable_overshoot flag to enable VBAT overshoot control + * @fg_res resistance of FG resistor in 0.1mOhm + * @n_btypes number of elements in array bat_type + * @batt_id index of the identified battery in array bat_type + * @interval_charging charge alg cycle period time when charging (sec) + * @interval_not_charging charge alg cycle period time when not charging (sec) + * @temp_hysteresis temperature hysteresis + * @gnd_lift_resistance Battery ground to phone ground resistance (mOhm) + * @maxi: maximization parameters + * @cap_levels capacity in percent for the different capacity levels + * @bat_type table of supported battery types + * @chg_params charger parameters + * @fg_params fuel gauge parameters + */ +struct ab8500_bm_data { + int temp_under; + int temp_low; + int temp_high; + int temp_over; + int temp_interval_chg; + int temp_interval_nochg; + int main_safety_tmr_h; + int usb_safety_tmr_h; + int bkup_bat_v; + int bkup_bat_i; + bool no_maintenance; + bool capacity_scaling; + bool chg_unknown_bat; + bool enable_overshoot; + enum abx500_adc_therm adc_therm; + int fg_res; + int n_btypes; + int batt_id; + int interval_charging; + int interval_not_charging; + int temp_hysteresis; + int gnd_lift_resistance; + const struct ab8500_maxim_parameters *maxi; + const struct ab8500_bm_capacity_levels *cap_levels; + const struct ab8500_bm_charger_parameters *chg_params; + const struct ab8500_fg_parameters *fg_params; +}; + +struct ab8500_btemp; +struct ab8500_gpadc; +struct ab8500_fg; + +#ifdef CONFIG_AB8500_BM +extern struct abx500_bm_data ab8500_bm_data; + +void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA); +struct ab8500_btemp *ab8500_btemp_get(void); +int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp); +int ab8500_btemp_get_temp(struct ab8500_btemp *btemp); +struct ab8500_fg *ab8500_fg_get(void); +int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev); +int ab8500_fg_inst_curr_start(struct ab8500_fg *di); +int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res); +int ab8500_fg_inst_curr_started(struct ab8500_fg *di); +int ab8500_fg_inst_curr_done(struct ab8500_fg *di); + +#else +static struct abx500_bm_data ab8500_bm_data; +#endif +#endif /* _AB8500_BM_H */ diff --git a/kernel/include/linux/mfd/abx500/ab8500-codec.h b/kernel/include/linux/mfd/abx500/ab8500-codec.h new file mode 100644 index 000000000..d7079413d --- /dev/null +++ b/kernel/include/linux/mfd/abx500/ab8500-codec.h @@ -0,0 +1,54 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Author: Ola Lilja <ola.o.lilja@stericsson.com> + * for ST-Ericsson. + * + * License terms: + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef AB8500_CORE_CODEC_H +#define AB8500_CORE_CODEC_H + +/* Mic-types */ +enum amic_type { + AMIC_TYPE_SINGLE_ENDED, + AMIC_TYPE_DIFFERENTIAL +}; + +/* Mic-biases */ +enum amic_micbias { + AMIC_MICBIAS_VAMIC1, + AMIC_MICBIAS_VAMIC2, + AMIC_MICBIAS_UNKNOWN +}; + +/* Bias-voltage */ +enum ear_cm_voltage { + EAR_CMV_0_95V, + EAR_CMV_1_10V, + EAR_CMV_1_27V, + EAR_CMV_1_58V, + EAR_CMV_UNKNOWN +}; + +/* Analog microphone settings */ +struct amic_settings { + enum amic_type mic1_type; + enum amic_type mic2_type; + enum amic_micbias mic1a_micbias; + enum amic_micbias mic1b_micbias; + enum amic_micbias mic2_micbias; +}; + +/* Platform data structure for the audio-parts of the AB8500 */ +struct ab8500_codec_platform_data { + struct amic_settings amics; + enum ear_cm_voltage ear_cmv; +}; + +#endif diff --git a/kernel/include/linux/mfd/abx500/ab8500-gpadc.h b/kernel/include/linux/mfd/abx500/ab8500-gpadc.h new file mode 100644 index 000000000..49ded0010 --- /dev/null +++ b/kernel/include/linux/mfd/abx500/ab8500-gpadc.h @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2010 ST-Ericsson SA + * Licensed under GPLv2. + * + * Author: Arun R Murthy <arun.murthy@stericsson.com> + * Author: Daniel Willerud <daniel.willerud@stericsson.com> + * Author: M'boumba Cedric Madianga <cedric.madianga@stericsson.com> + */ + +#ifndef _AB8500_GPADC_H +#define _AB8500_GPADC_H + +/* GPADC source: From datasheet(ADCSwSel[4:0] in GPADCCtrl2 + * and ADCHwSel[4:0] in GPADCCtrl3 ) */ +#define BAT_CTRL 0x01 +#define BTEMP_BALL 0x02 +#define MAIN_CHARGER_V 0x03 +#define ACC_DETECT1 0x04 +#define ACC_DETECT2 0x05 +#define ADC_AUX1 0x06 +#define ADC_AUX2 0x07 +#define MAIN_BAT_V 0x08 +#define VBUS_V 0x09 +#define MAIN_CHARGER_C 0x0A +#define USB_CHARGER_C 0x0B +#define BK_BAT_V 0x0C +#define DIE_TEMP 0x0D +#define USB_ID 0x0E +#define XTAL_TEMP 0x12 +#define VBAT_TRUE_MEAS 0x13 +#define BAT_CTRL_AND_IBAT 0x1C +#define VBAT_MEAS_AND_IBAT 0x1D +#define VBAT_TRUE_MEAS_AND_IBAT 0x1E +#define BAT_TEMP_AND_IBAT 0x1F + +/* Virtual channel used only for ibat convertion to ampere + * Battery current conversion (ibat) cannot be requested as a single conversion + * but it is always in combination with other input requests + */ +#define IBAT_VIRTUAL_CHANNEL 0xFF + +#define SAMPLE_1 1 +#define SAMPLE_4 4 +#define SAMPLE_8 8 +#define SAMPLE_16 16 +#define RISING_EDGE 0 +#define FALLING_EDGE 1 + +/* Arbitrary ADC conversion type constants */ +#define ADC_SW 0 +#define ADC_HW 1 + +struct ab8500_gpadc; + +struct ab8500_gpadc *ab8500_gpadc_get(char *name); +int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel, + u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type); +static inline int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 channel) +{ + return ab8500_gpadc_sw_hw_convert(gpadc, channel, + SAMPLE_16, 0, 0, ADC_SW); +} + +int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel, + u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type); +int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel, + u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type, + int *ibat); +int ab8500_gpadc_ad_to_voltage(struct ab8500_gpadc *gpadc, + u8 channel, int ad_value); +void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc, + u16 *vmain_l, u16 *vmain_h, u16 *btemp_l, u16 *btemp_h, + u16 *vbat_l, u16 *vbat_h, u16 *ibat_l, u16 *ibat_h); + +#endif /* _AB8500_GPADC_H */ diff --git a/kernel/include/linux/mfd/abx500/ab8500-sysctrl.h b/kernel/include/linux/mfd/abx500/ab8500-sysctrl.h new file mode 100644 index 000000000..689312745 --- /dev/null +++ b/kernel/include/linux/mfd/abx500/ab8500-sysctrl.h @@ -0,0 +1,307 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> for ST Ericsson. + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef __AB8500_SYSCTRL_H +#define __AB8500_SYSCTRL_H + +#include <linux/bitops.h> + +#ifdef CONFIG_AB8500_CORE + +int ab8500_sysctrl_read(u16 reg, u8 *value); +int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value); + +#else + +static inline int ab8500_sysctrl_read(u16 reg, u8 *value) +{ + return 0; +} + +static inline int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value) +{ + return 0; +} + +#endif /* CONFIG_AB8500_CORE */ + +static inline int ab8500_sysctrl_set(u16 reg, u8 bits) +{ + return ab8500_sysctrl_write(reg, bits, bits); +} + +static inline int ab8500_sysctrl_clear(u16 reg, u8 bits) +{ + return ab8500_sysctrl_write(reg, bits, 0); +} + +/* Configuration data for SysClkReq1RfClkBuf - SysClkReq8RfClkBuf */ +struct ab8500_sysctrl_platform_data { + u8 initial_req_buf_config[8]; + u16 (*reboot_reason_code)(const char *cmd); +}; + +/* Registers */ +#define AB8500_TURNONSTATUS 0x100 +#define AB8500_RESETSTATUS 0x101 +#define AB8500_PONKEY1PRESSSTATUS 0x102 +#define AB8500_SYSCLKREQSTATUS 0x142 +#define AB8500_STW4500CTRL1 0x180 +#define AB8500_STW4500CTRL2 0x181 +#define AB8500_STW4500CTRL3 0x200 +#define AB8500_MAINWDOGCTRL 0x201 +#define AB8500_MAINWDOGTIMER 0x202 +#define AB8500_LOWBAT 0x203 +#define AB8500_BATTOK 0x204 +#define AB8500_SYSCLKTIMER 0x205 +#define AB8500_SMPSCLKCTRL 0x206 +#define AB8500_SMPSCLKSEL1 0x207 +#define AB8500_SMPSCLKSEL2 0x208 +#define AB8500_SMPSCLKSEL3 0x209 +#define AB8500_SYSULPCLKCONF 0x20A +#define AB8500_SYSULPCLKCTRL1 0x20B +#define AB8500_SYSCLKCTRL 0x20C +#define AB8500_SYSCLKREQ1VALID 0x20D +#define AB8500_SYSTEMCTRLSUP 0x20F +#define AB8500_SYSCLKREQ1RFCLKBUF 0x210 +#define AB8500_SYSCLKREQ2RFCLKBUF 0x211 +#define AB8500_SYSCLKREQ3RFCLKBUF 0x212 +#define AB8500_SYSCLKREQ4RFCLKBUF 0x213 +#define AB8500_SYSCLKREQ5RFCLKBUF 0x214 +#define AB8500_SYSCLKREQ6RFCLKBUF 0x215 +#define AB8500_SYSCLKREQ7RFCLKBUF 0x216 +#define AB8500_SYSCLKREQ8RFCLKBUF 0x217 +#define AB8500_DITHERCLKCTRL 0x220 +#define AB8500_SWATCTRL 0x230 +#define AB8500_HIQCLKCTRL 0x232 +#define AB8500_VSIMSYSCLKCTRL 0x233 +#define AB9540_SYSCLK12BUFCTRL 0x234 +#define AB9540_SYSCLK12CONFCTRL 0x235 +#define AB9540_SYSCLK12BUFCTRL2 0x236 +#define AB9540_SYSCLK12BUF1VALID 0x237 +#define AB9540_SYSCLK12BUF2VALID 0x238 +#define AB9540_SYSCLK12BUF3VALID 0x239 +#define AB9540_SYSCLK12BUF4VALID 0x23A + +/* Bits */ +#define AB8500_TURNONSTATUS_PORNVBAT BIT(0) +#define AB8500_TURNONSTATUS_PONKEY1DBF BIT(1) +#define AB8500_TURNONSTATUS_PONKEY2DBF BIT(2) +#define AB8500_TURNONSTATUS_RTCALARM BIT(3) +#define AB8500_TURNONSTATUS_MAINCHDET BIT(4) +#define AB8500_TURNONSTATUS_VBUSDET BIT(5) +#define AB8500_TURNONSTATUS_USBIDDETECT BIT(6) + +#define AB8500_RESETSTATUS_RESETN4500NSTATUS BIT(0) +#define AB8500_RESETSTATUS_SWRESETN4500NSTATUS BIT(2) + +#define AB8500_PONKEY1PRESSSTATUS_PONKEY1PRESSTIME_MASK 0x7F +#define AB8500_PONKEY1PRESSSTATUS_PONKEY1PRESSTIME_SHIFT 0 + +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ1STATUS BIT(0) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ2STATUS BIT(1) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ3STATUS BIT(2) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ4STATUS BIT(3) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ5STATUS BIT(4) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ6STATUS BIT(5) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ7STATUS BIT(6) +#define AB8500_SYSCLKREQSTATUS_SYSCLKREQ8STATUS BIT(7) + +#define AB8500_STW4500CTRL1_SWOFF BIT(0) +#define AB8500_STW4500CTRL1_SWRESET4500N BIT(1) +#define AB8500_STW4500CTRL1_THDB8500SWOFF BIT(2) + +#define AB8500_STW4500CTRL2_RESETNVAUX1VALID BIT(0) +#define AB8500_STW4500CTRL2_RESETNVAUX2VALID BIT(1) +#define AB8500_STW4500CTRL2_RESETNVAUX3VALID BIT(2) +#define AB8500_STW4500CTRL2_RESETNVMODVALID BIT(3) +#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY1VALID BIT(4) +#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY2VALID BIT(5) +#define AB8500_STW4500CTRL2_RESETNVEXTSUPPLY3VALID BIT(6) +#define AB8500_STW4500CTRL2_RESETNVSMPS1VALID BIT(7) + +#define AB8500_STW4500CTRL3_CLK32KOUT2DIS BIT(0) +#define AB8500_STW4500CTRL3_RESETAUDN BIT(1) +#define AB8500_STW4500CTRL3_RESETDENCN BIT(2) +#define AB8500_STW4500CTRL3_THSDENA BIT(3) + +#define AB8500_MAINWDOGCTRL_MAINWDOGENA BIT(0) +#define AB8500_MAINWDOGCTRL_MAINWDOGKICK BIT(1) +#define AB8500_MAINWDOGCTRL_WDEXPTURNONVALID BIT(4) + +#define AB8500_MAINWDOGTIMER_MAINWDOGTIMER_MASK 0x7F +#define AB8500_MAINWDOGTIMER_MAINWDOGTIMER_SHIFT 0 + +#define AB8500_LOWBAT_LOWBATENA BIT(0) +#define AB8500_LOWBAT_LOWBAT_MASK 0x7E +#define AB8500_LOWBAT_LOWBAT_SHIFT 1 + +#define AB8500_BATTOK_BATTOKSEL0THF_MASK 0x0F +#define AB8500_BATTOK_BATTOKSEL0THF_SHIFT 0 +#define AB8500_BATTOK_BATTOKSEL1THF_MASK 0xF0 +#define AB8500_BATTOK_BATTOKSEL1THF_SHIFT 4 + +#define AB8500_SYSCLKTIMER_SYSCLKTIMER_MASK 0x0F +#define AB8500_SYSCLKTIMER_SYSCLKTIMER_SHIFT 0 +#define AB8500_SYSCLKTIMER_SYSCLKTIMERADJ_MASK 0xF0 +#define AB8500_SYSCLKTIMER_SYSCLKTIMERADJ_SHIFT 4 + +#define AB8500_SMPSCLKCTRL_SMPSCLKINTSEL_MASK 0x03 +#define AB8500_SMPSCLKCTRL_SMPSCLKINTSEL_SHIFT 0 +#define AB8500_SMPSCLKCTRL_3M2CLKINTENA BIT(2) + +#define AB8500_SMPSCLKSEL1_VARMCLKSEL_MASK 0x07 +#define AB8500_SMPSCLKSEL1_VARMCLKSEL_SHIFT 0 +#define AB8500_SMPSCLKSEL1_VAPECLKSEL_MASK 0x38 +#define AB8500_SMPSCLKSEL1_VAPECLKSEL_SHIFT 3 + +#define AB8500_SMPSCLKSEL2_VMODCLKSEL_MASK 0x07 +#define AB8500_SMPSCLKSEL2_VMODCLKSEL_SHIFT 0 +#define AB8500_SMPSCLKSEL2_VSMPS1CLKSEL_MASK 0x38 +#define AB8500_SMPSCLKSEL2_VSMPS1CLKSEL_SHIFT 3 + +#define AB8500_SMPSCLKSEL3_VSMPS2CLKSEL_MASK 0x07 +#define AB8500_SMPSCLKSEL3_VSMPS2CLKSEL_SHIFT 0 +#define AB8500_SMPSCLKSEL3_VSMPS3CLKSEL_MASK 0x38 +#define AB8500_SMPSCLKSEL3_VSMPS3CLKSEL_SHIFT 3 + +#define AB8500_SYSULPCLKCONF_ULPCLKCONF_MASK 0x03 +#define AB8500_SYSULPCLKCONF_ULPCLKCONF_SHIFT 0 +#define AB8500_SYSULPCLKCONF_CLK27MHZSTRE BIT(2) +#define AB8500_SYSULPCLKCONF_TVOUTCLKDELN BIT(3) +#define AB8500_SYSULPCLKCONF_TVOUTCLKINV BIT(4) +#define AB8500_SYSULPCLKCONF_ULPCLKSTRE BIT(5) +#define AB8500_SYSULPCLKCONF_CLK27MHZBUFENA BIT(6) +#define AB8500_SYSULPCLKCONF_CLK27MHZPDENA BIT(7) + +#define AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_MASK 0x03 +#define AB8500_SYSULPCLKCTRL1_SYSULPCLKINTSEL_SHIFT 0 +#define AB8500_SYSULPCLKCTRL1_ULPCLKREQ BIT(2) +#define AB8500_SYSULPCLKCTRL1_4500SYSCLKREQ BIT(3) +#define AB8500_SYSULPCLKCTRL1_AUDIOCLKENA BIT(4) +#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF2REQ BIT(5) +#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF3REQ BIT(6) +#define AB8500_SYSULPCLKCTRL1_SYSCLKBUF4REQ BIT(7) + +#define AB8500_SYSCLKCTRL_TVOUTPLLENA BIT(0) +#define AB8500_SYSCLKCTRL_TVOUTCLKENA BIT(1) +#define AB8500_SYSCLKCTRL_USBCLKENA BIT(2) + +#define AB8500_SYSCLKREQ1VALID_SYSCLKREQ1VALID BIT(0) +#define AB8500_SYSCLKREQ1VALID_ULPCLKREQ1VALID BIT(1) +#define AB8500_SYSCLKREQ1VALID_USBSYSCLKREQ1VALID BIT(2) + +#define AB8500_SYSTEMCTRLSUP_EXTSUP12LPNCLKSEL_MASK 0x03 +#define AB8500_SYSTEMCTRLSUP_EXTSUP12LPNCLKSEL_SHIFT 0 +#define AB8500_SYSTEMCTRLSUP_EXTSUP3LPNCLKSEL_MASK 0x0C +#define AB8500_SYSTEMCTRLSUP_EXTSUP3LPNCLKSEL_SHIFT 2 +#define AB8500_SYSTEMCTRLSUP_INTDB8500NOD BIT(4) + +#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ1RFCLKBUF_SYSCLKREQ1RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ2RFCLKBUF_SYSCLKREQ2RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ3RFCLKBUF_SYSCLKREQ3RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ4RFCLKBUF_SYSCLKREQ4RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ5RFCLKBUF_SYSCLKREQ5RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ6RFCLKBUF_SYSCLKREQ6RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ7RFCLKBUF_SYSCLKREQ7RFCLKBUF4 BIT(4) + +#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF2 BIT(2) +#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF3 BIT(3) +#define AB8500_SYSCLKREQ8RFCLKBUF_SYSCLKREQ8RFCLKBUF4 BIT(4) + +#define AB8500_DITHERCLKCTRL_VARMDITHERENA BIT(0) +#define AB8500_DITHERCLKCTRL_VSMPS3DITHERENA BIT(1) +#define AB8500_DITHERCLKCTRL_VSMPS1DITHERENA BIT(2) +#define AB8500_DITHERCLKCTRL_VSMPS2DITHERENA BIT(3) +#define AB8500_DITHERCLKCTRL_VMODDITHERENA BIT(4) +#define AB8500_DITHERCLKCTRL_VAPEDITHERENA BIT(5) +#define AB8500_DITHERCLKCTRL_DITHERDEL_MASK 0xC0 +#define AB8500_DITHERCLKCTRL_DITHERDEL_SHIFT 6 + +#define AB8500_SWATCTRL_UPDATERF BIT(0) +#define AB8500_SWATCTRL_SWATENABLE BIT(1) +#define AB8500_SWATCTRL_RFOFFTIMER_MASK 0x1C +#define AB8500_SWATCTRL_RFOFFTIMER_SHIFT 2 +#define AB8500_SWATCTRL_SWATBIT5 BIT(6) + +#define AB8500_HIQCLKCTRL_SYSCLKREQ1HIQENAVALID BIT(0) +#define AB8500_HIQCLKCTRL_SYSCLKREQ2HIQENAVALID BIT(1) +#define AB8500_HIQCLKCTRL_SYSCLKREQ3HIQENAVALID BIT(2) +#define AB8500_HIQCLKCTRL_SYSCLKREQ4HIQENAVALID BIT(3) +#define AB8500_HIQCLKCTRL_SYSCLKREQ5HIQENAVALID BIT(4) +#define AB8500_HIQCLKCTRL_SYSCLKREQ6HIQENAVALID BIT(5) +#define AB8500_HIQCLKCTRL_SYSCLKREQ7HIQENAVALID BIT(6) +#define AB8500_HIQCLKCTRL_SYSCLKREQ8HIQENAVALID BIT(7) + +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ1VALID BIT(0) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ2VALID BIT(1) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ3VALID BIT(2) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ4VALID BIT(3) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ5VALID BIT(4) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ6VALID BIT(5) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ7VALID BIT(6) +#define AB8500_VSIMSYSCLKCTRL_VSIMSYSCLKREQ8VALID BIT(7) + +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1ENA BIT(0) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2ENA BIT(1) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3ENA BIT(2) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4ENA BIT(3) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFENA_MASK 0x0F +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF1STRE BIT(4) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF2STRE BIT(5) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF3STRE BIT(6) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUF4STRE BIT(7) +#define AB9540_SYSCLK12BUFCTRL_SYSCLK12BUFSTRE_MASK 0xF0 + +#define AB9540_SYSCLK12CONFCTRL_PLL26TO38ENA BIT(0) +#define AB9540_SYSCLK12CONFCTRL_SYSCLK12USBMUXSEL BIT(1) +#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL0 BIT(2) +#define AB9540_SYSCLK12CONFCTRL_INT384MHZMUXSEL1 BIT(3) +#define AB9540_SYSCLK12CONFCTRL_SYSCLK12BUFMUX BIT(4) +#define AB9540_SYSCLK12CONFCTRL_SYSCLK12PLLMUX BIT(5) +#define AB9540_SYSCLK12CONFCTRL_SYSCLK2MUXVALID BIT(6) + +#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF1PDENA BIT(0) +#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF2PDENA BIT(1) +#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF3PDENA BIT(2) +#define AB9540_SYSCLK12BUFCTRL2_SYSCLK12BUF4PDENA BIT(3) + +#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_MASK 0xFF +#define AB9540_SYSCLK12BUF1VALID_SYSCLK12BUF1VALID_SHIFT 0 + +#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_MASK 0xFF +#define AB9540_SYSCLK12BUF2VALID_SYSCLK12BUF2VALID_SHIFT 0 + +#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_MASK 0xFF +#define AB9540_SYSCLK12BUF3VALID_SYSCLK12BUF3VALID_SHIFT 0 + +#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_MASK 0xFF +#define AB9540_SYSCLK12BUF4VALID_SYSCLK12BUF4VALID_SHIFT 0 + +#define AB8500_ENABLE_WD 0x1 +#define AB8500_KICK_WD 0x2 +#define AB8500_WD_RESTART_ON_EXPIRE 0x10 + +#endif /* __AB8500_SYSCTRL_H */ diff --git a/kernel/include/linux/mfd/abx500/ab8500.h b/kernel/include/linux/mfd/abx500/ab8500.h new file mode 100644 index 000000000..9475fee2b --- /dev/null +++ b/kernel/include/linux/mfd/abx500/ab8500.h @@ -0,0 +1,516 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> + */ +#ifndef MFD_AB8500_H +#define MFD_AB8500_H + +#include <linux/atomic.h> +#include <linux/mutex.h> +#include <linux/irqdomain.h> + +struct device; + +/* + * AB IC versions + * + * AB8500_VERSION_AB8500 should be 0xFF but will never be read as need a + * non-supported multi-byte I2C access via PRCMU. Set to 0x00 to ease the + * print of version string. + */ +enum ab8500_version { + AB8500_VERSION_AB8500 = 0x0, + AB8500_VERSION_AB8505 = 0x1, + AB8500_VERSION_AB9540 = 0x2, + AB8500_VERSION_AB8540 = 0x4, + AB8500_VERSION_UNDEFINED, +}; + +/* AB8500 CIDs*/ +#define AB8500_CUTEARLY 0x00 +#define AB8500_CUT1P0 0x10 +#define AB8500_CUT1P1 0x11 +#define AB8500_CUT1P2 0x12 /* Only valid for AB8540 */ +#define AB8500_CUT2P0 0x20 +#define AB8500_CUT3P0 0x30 +#define AB8500_CUT3P3 0x33 + +/* + * AB8500 bank addresses + */ +#define AB8500_M_FSM_RANK 0x0 +#define AB8500_SYS_CTRL1_BLOCK 0x1 +#define AB8500_SYS_CTRL2_BLOCK 0x2 +#define AB8500_REGU_CTRL1 0x3 +#define AB8500_REGU_CTRL2 0x4 +#define AB8500_USB 0x5 +#define AB8500_TVOUT 0x6 +#define AB8500_DBI 0x7 +#define AB8500_ECI_AV_ACC 0x8 +#define AB8500_RESERVED 0x9 +#define AB8500_GPADC 0xA +#define AB8500_CHARGER 0xB +#define AB8500_GAS_GAUGE 0xC +#define AB8500_AUDIO 0xD +#define AB8500_INTERRUPT 0xE +#define AB8500_RTC 0xF +#define AB8500_MISC 0x10 +#define AB8500_DEVELOPMENT 0x11 +#define AB8500_DEBUG 0x12 +#define AB8500_PROD_TEST 0x13 +#define AB8500_STE_TEST 0x14 +#define AB8500_OTP_EMUL 0x15 + +/* + * Interrupts + * Values used to index into array ab8500_irq_regoffset[] defined in + * drivers/mdf/ab8500-core.c + */ +/* Definitions for AB8500, AB9540 and AB8540 */ +/* ab8500_irq_regoffset[0] -> IT[Source|Latch|Mask]1 */ +#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0 /* not 8505/9540 */ +#define AB8500_INT_UN_PLUG_TV_DET 1 /* not 8505/9540/8540 */ +#define AB8500_INT_PLUG_TV_DET 2 /* not 8505/9540/8540 */ +#define AB8500_INT_TEMP_WARM 3 +#define AB8500_INT_PON_KEY2DB_F 4 +#define AB8500_INT_PON_KEY2DB_R 5 +#define AB8500_INT_PON_KEY1DB_F 6 +#define AB8500_INT_PON_KEY1DB_R 7 +/* ab8500_irq_regoffset[1] -> IT[Source|Latch|Mask]2 */ +#define AB8500_INT_BATT_OVV 8 +#define AB8500_INT_MAIN_CH_UNPLUG_DET 10 /* not 8505/8540 */ +#define AB8500_INT_MAIN_CH_PLUG_DET 11 /* not 8505/8540 */ +#define AB8500_INT_VBUS_DET_F 14 +#define AB8500_INT_VBUS_DET_R 15 +/* ab8500_irq_regoffset[2] -> IT[Source|Latch|Mask]3 */ +#define AB8500_INT_VBUS_CH_DROP_END 16 +#define AB8500_INT_RTC_60S 17 +#define AB8500_INT_RTC_ALARM 18 +#define AB8540_INT_BIF_INT 19 +#define AB8500_INT_BAT_CTRL_INDB 20 +#define AB8500_INT_CH_WD_EXP 21 +#define AB8500_INT_VBUS_OVV 22 +#define AB8500_INT_MAIN_CH_DROP_END 23 /* not 8505/9540/8540 */ +/* ab8500_irq_regoffset[3] -> IT[Source|Latch|Mask]4 */ +#define AB8500_INT_CCN_CONV_ACC 24 +#define AB8500_INT_INT_AUD 25 +#define AB8500_INT_CCEOC 26 +#define AB8500_INT_CC_INT_CALIB 27 +#define AB8500_INT_LOW_BAT_F 28 +#define AB8500_INT_LOW_BAT_R 29 +#define AB8500_INT_BUP_CHG_NOT_OK 30 +#define AB8500_INT_BUP_CHG_OK 31 +/* ab8500_irq_regoffset[4] -> IT[Source|Latch|Mask]5 */ +#define AB8500_INT_GP_HW_ADC_CONV_END 32 /* not 8505/8540 */ +#define AB8500_INT_ACC_DETECT_1DB_F 33 +#define AB8500_INT_ACC_DETECT_1DB_R 34 +#define AB8500_INT_ACC_DETECT_22DB_F 35 +#define AB8500_INT_ACC_DETECT_22DB_R 36 +#define AB8500_INT_ACC_DETECT_21DB_F 37 +#define AB8500_INT_ACC_DETECT_21DB_R 38 +#define AB8500_INT_GP_SW_ADC_CONV_END 39 +/* ab8500_irq_regoffset[5] -> IT[Source|Latch|Mask]7 */ +#define AB8500_INT_GPIO6R 40 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO7R 41 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO8R 42 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO9R 43 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO10R 44 /* not 8540 */ +#define AB8500_INT_GPIO11R 45 /* not 8540 */ +#define AB8500_INT_GPIO12R 46 /* not 8505/8540 */ +#define AB8500_INT_GPIO13R 47 /* not 8540 */ +/* ab8500_irq_regoffset[6] -> IT[Source|Latch|Mask]8 */ +#define AB8500_INT_GPIO24R 48 /* not 8505/8540 */ +#define AB8500_INT_GPIO25R 49 /* not 8505/8540 */ +#define AB8500_INT_GPIO36R 50 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO37R 51 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO38R 52 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO39R 53 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO40R 54 /* not 8540 */ +#define AB8500_INT_GPIO41R 55 /* not 8540 */ +/* ab8500_irq_regoffset[7] -> IT[Source|Latch|Mask]9 */ +#define AB8500_INT_GPIO6F 56 /* not 8505/9540 */ +#define AB8500_INT_GPIO7F 57 /* not 8505/9540 */ +#define AB8500_INT_GPIO8F 58 /* not 8505/9540 */ +#define AB8500_INT_GPIO9F 59 /* not 8505/9540 */ +#define AB8500_INT_GPIO10F 60 +#define AB8500_INT_GPIO11F 61 +#define AB8500_INT_GPIO12F 62 /* not 8505 */ +#define AB8500_INT_GPIO13F 63 +/* ab8500_irq_regoffset[8] -> IT[Source|Latch|Mask]10 */ +#define AB8500_INT_GPIO24F 64 /* not 8505/8540 */ +#define AB8500_INT_GPIO25F 65 /* not 8505/8540 */ +#define AB8500_INT_GPIO36F 66 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO37F 67 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO38F 68 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO39F 69 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO40F 70 /* not 8540 */ +#define AB8500_INT_GPIO41F 71 /* not 8540 */ +/* ab8500_irq_regoffset[9] -> IT[Source|Latch|Mask]12 */ +#define AB8500_INT_ADP_SOURCE_ERROR 72 +#define AB8500_INT_ADP_SINK_ERROR 73 +#define AB8500_INT_ADP_PROBE_PLUG 74 +#define AB8500_INT_ADP_PROBE_UNPLUG 75 +#define AB8500_INT_ADP_SENSE_OFF 76 +#define AB8500_INT_USB_PHY_POWER_ERR 78 +#define AB8500_INT_USB_LINK_STATUS 79 +/* ab8500_irq_regoffset[10] -> IT[Source|Latch|Mask]19 */ +#define AB8500_INT_BTEMP_LOW 80 +#define AB8500_INT_BTEMP_LOW_MEDIUM 81 +#define AB8500_INT_BTEMP_MEDIUM_HIGH 82 +#define AB8500_INT_BTEMP_HIGH 83 +/* ab8500_irq_regoffset[11] -> IT[Source|Latch|Mask]20 */ +#define AB8500_INT_SRP_DETECT 88 +#define AB8500_INT_USB_CHARGER_NOT_OKR 89 +#define AB8500_INT_ID_WAKEUP_R 90 +#define AB8500_INT_ID_DET_PLUGR 91 /* 8505/9540 cut2.0 */ +#define AB8500_INT_ID_DET_R1R 92 +#define AB8500_INT_ID_DET_R2R 93 +#define AB8500_INT_ID_DET_R3R 94 +#define AB8500_INT_ID_DET_R4R 95 +/* ab8500_irq_regoffset[12] -> IT[Source|Latch|Mask]21 */ +#define AB8500_INT_ID_WAKEUP_F 96 /* not 8505/9540 */ +#define AB8500_INT_ID_DET_PLUGF 97 /* 8505/9540 cut2.0 */ +#define AB8500_INT_ID_DET_R1F 98 /* not 8505/9540 */ +#define AB8500_INT_ID_DET_R2F 99 /* not 8505/9540 */ +#define AB8500_INT_ID_DET_R3F 100 /* not 8505/9540 */ +#define AB8500_INT_ID_DET_R4F 101 /* not 8505/9540 */ +#define AB8500_INT_CHAUTORESTARTAFTSEC 102 /* not 8505/9540 */ +#define AB8500_INT_CHSTOPBYSEC 103 +/* ab8500_irq_regoffset[13] -> IT[Source|Latch|Mask]22 */ +#define AB8500_INT_USB_CH_TH_PROT_F 104 +#define AB8500_INT_USB_CH_TH_PROT_R 105 +#define AB8500_INT_MAIN_CH_TH_PROT_F 106 /* not 8505/9540 */ +#define AB8500_INT_MAIN_CH_TH_PROT_R 107 /* not 8505/9540 */ +#define AB8500_INT_CHCURLIMNOHSCHIRP 109 +#define AB8500_INT_CHCURLIMHSCHIRP 110 +#define AB8500_INT_XTAL32K_KO 111 + +/* Definitions for AB9540 / AB8505 */ +/* ab8500_irq_regoffset[14] -> IT[Source|Latch|Mask]13 */ +#define AB9540_INT_GPIO50R 113 /* not 8540 */ +#define AB9540_INT_GPIO51R 114 /* not 8505/8540 */ +#define AB9540_INT_GPIO52R 115 /* not 8540 */ +#define AB9540_INT_GPIO53R 116 /* not 8540 */ +#define AB9540_INT_GPIO54R 117 /* not 8505/8540 */ +#define AB9540_INT_IEXT_CH_RF_BFN_R 118 +/* ab8500_irq_regoffset[15] -> IT[Source|Latch|Mask]14 */ +#define AB9540_INT_GPIO50F 121 /* not 8540 */ +#define AB9540_INT_GPIO51F 122 /* not 8505/8540 */ +#define AB9540_INT_GPIO52F 123 /* not 8540 */ +#define AB9540_INT_GPIO53F 124 /* not 8540 */ +#define AB9540_INT_GPIO54F 125 /* not 8505/8540 */ +#define AB9540_INT_IEXT_CH_RF_BFN_F 126 +/* ab8500_irq_regoffset[16] -> IT[Source|Latch|Mask]25 */ +#define AB8505_INT_KEYSTUCK 128 +#define AB8505_INT_IKR 129 +#define AB8505_INT_IKP 130 +#define AB8505_INT_KP 131 +#define AB8505_INT_KEYDEGLITCH 132 +#define AB8505_INT_MODPWRSTATUSF 134 +#define AB8505_INT_MODPWRSTATUSR 135 +/* ab8500_irq_regoffset[17] -> IT[Source|Latch|Mask]6 */ +#define AB8500_INT_HOOK_DET_NEG_F 138 +#define AB8500_INT_HOOK_DET_NEG_R 139 +#define AB8500_INT_HOOK_DET_POS_F 140 +#define AB8500_INT_HOOK_DET_POS_R 141 +#define AB8500_INT_PLUG_DET_COMP_F 142 +#define AB8500_INT_PLUG_DET_COMP_R 143 +/* ab8500_irq_regoffset[18] -> IT[Source|Latch|Mask]23 */ +#define AB8505_INT_COLL 144 +#define AB8505_INT_RESERR 145 +#define AB8505_INT_FRAERR 146 +#define AB8505_INT_COMERR 147 +#define AB8505_INT_SPDSET 148 +#define AB8505_INT_DSENT 149 +#define AB8505_INT_DREC 150 +#define AB8505_INT_ACC_INT 151 +/* ab8500_irq_regoffset[19] -> IT[Source|Latch|Mask]24 */ +#define AB8505_INT_NOPINT 152 +/* ab8540_irq_regoffset[20] -> IT[Source|Latch|Mask]26 */ +#define AB8540_INT_IDPLUGDETCOMPF 160 +#define AB8540_INT_IDPLUGDETCOMPR 161 +#define AB8540_INT_FMDETCOMPLOF 162 +#define AB8540_INT_FMDETCOMPLOR 163 +#define AB8540_INT_FMDETCOMPHIF 164 +#define AB8540_INT_FMDETCOMPHIR 165 +#define AB8540_INT_ID5VDETCOMPF 166 +#define AB8540_INT_ID5VDETCOMPR 167 +/* ab8540_irq_regoffset[21] -> IT[Source|Latch|Mask]27 */ +#define AB8540_INT_GPIO43F 168 +#define AB8540_INT_GPIO43R 169 +#define AB8540_INT_GPIO44F 170 +#define AB8540_INT_GPIO44R 171 +#define AB8540_INT_KEYPOSDETCOMPF 172 +#define AB8540_INT_KEYPOSDETCOMPR 173 +#define AB8540_INT_KEYNEGDETCOMPF 174 +#define AB8540_INT_KEYNEGDETCOMPR 175 +/* ab8540_irq_regoffset[22] -> IT[Source|Latch|Mask]28 */ +#define AB8540_INT_GPIO1VBATF 176 +#define AB8540_INT_GPIO1VBATR 177 +#define AB8540_INT_GPIO2VBATF 178 +#define AB8540_INT_GPIO2VBATR 179 +#define AB8540_INT_GPIO3VBATF 180 +#define AB8540_INT_GPIO3VBATR 181 +#define AB8540_INT_GPIO4VBATF 182 +#define AB8540_INT_GPIO4VBATR 183 +/* ab8540_irq_regoffset[23] -> IT[Source|Latch|Mask]29 */ +#define AB8540_INT_SYSCLKREQ2F 184 +#define AB8540_INT_SYSCLKREQ2R 185 +#define AB8540_INT_SYSCLKREQ3F 186 +#define AB8540_INT_SYSCLKREQ3R 187 +#define AB8540_INT_SYSCLKREQ4F 188 +#define AB8540_INT_SYSCLKREQ4R 189 +#define AB8540_INT_SYSCLKREQ5F 190 +#define AB8540_INT_SYSCLKREQ5R 191 +/* ab8540_irq_regoffset[24] -> IT[Source|Latch|Mask]30 */ +#define AB8540_INT_PWMOUT1F 192 +#define AB8540_INT_PWMOUT1R 193 +#define AB8540_INT_PWMCTRL0F 194 +#define AB8540_INT_PWMCTRL0R 195 +#define AB8540_INT_PWMCTRL1F 196 +#define AB8540_INT_PWMCTRL1R 197 +#define AB8540_INT_SYSCLKREQ6F 198 +#define AB8540_INT_SYSCLKREQ6R 199 +/* ab8540_irq_regoffset[25] -> IT[Source|Latch|Mask]31 */ +#define AB8540_INT_PWMEXTVIBRA1F 200 +#define AB8540_INT_PWMEXTVIBRA1R 201 +#define AB8540_INT_PWMEXTVIBRA2F 202 +#define AB8540_INT_PWMEXTVIBRA2R 203 +#define AB8540_INT_PWMOUT2F 204 +#define AB8540_INT_PWMOUT2R 205 +#define AB8540_INT_PWMOUT3F 206 +#define AB8540_INT_PWMOUT3R 207 +/* ab8540_irq_regoffset[26] -> IT[Source|Latch|Mask]32 */ +#define AB8540_INT_ADDATA2F 208 +#define AB8540_INT_ADDATA2R 209 +#define AB8540_INT_DADATA2F 210 +#define AB8540_INT_DADATA2R 211 +#define AB8540_INT_FSYNC2F 212 +#define AB8540_INT_FSYNC2R 213 +#define AB8540_INT_BITCLK2F 214 +#define AB8540_INT_BITCLK2R 215 +/* ab8540_irq_regoffset[27] -> IT[Source|Latch|Mask]33 */ +#define AB8540_INT_RTC_1S 216 + +/* + * AB8500_AB9540_NR_IRQS is used when configuring the IRQ numbers for the + * entire platform. This is a "compile time" constant so this must be set to + * the largest possible value that may be encountered with different AB SOCs. + * Of the currently supported AB devices, AB8500 and AB9540, it is the AB9540 + * which is larger. + */ +#define AB8500_NR_IRQS 112 +#define AB8505_NR_IRQS 153 +#define AB9540_NR_IRQS 153 +#define AB8540_NR_IRQS 216 +/* This is set to the roof of any AB8500 chip variant IRQ counts */ +#define AB8500_MAX_NR_IRQS AB8540_NR_IRQS + +#define AB8500_NUM_IRQ_REGS 14 +#define AB9540_NUM_IRQ_REGS 20 +#define AB8540_NUM_IRQ_REGS 27 + +/* Turn On Status Event */ +#define AB8500_POR_ON_VBAT 0x01 +#define AB8500_POW_KEY_1_ON 0x02 +#define AB8500_POW_KEY_2_ON 0x04 +#define AB8500_RTC_ALARM 0x08 +#define AB8500_MAIN_CH_DET 0x10 +#define AB8500_VBUS_DET 0x20 +#define AB8500_USB_ID_DET 0x40 + +/** + * struct ab8500 - ab8500 internal structure + * @dev: parent device + * @lock: read/write operations lock + * @irq_lock: genirq bus lock + * @transfer_ongoing: 0 if no transfer ongoing + * @irq: irq line + * @irq_domain: irq domain + * @version: chip version id (e.g. ab8500 or ab9540) + * @chip_id: chip revision id + * @write: register write + * @write_masked: masked register write + * @read: register read + * @rx_buf: rx buf for SPI + * @tx_buf: tx buf for SPI + * @mask: cache of IRQ regs for bus lock + * @oldmask: cache of previous IRQ regs for bus lock + * @mask_size: Actual number of valid entries in mask[], oldmask[] and + * irq_reg_offset + * @irq_reg_offset: Array of offsets into IRQ registers + */ +struct ab8500 { + struct device *dev; + struct mutex lock; + struct mutex irq_lock; + atomic_t transfer_ongoing; + int irq; + struct irq_domain *domain; + enum ab8500_version version; + u8 chip_id; + + int (*write)(struct ab8500 *ab8500, u16 addr, u8 data); + int (*write_masked)(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data); + int (*read)(struct ab8500 *ab8500, u16 addr); + + unsigned long tx_buf[4]; + unsigned long rx_buf[4]; + + u8 *mask; + u8 *oldmask; + int mask_size; + const int *irq_reg_offset; + int it_latchhier_num; +}; + +struct ab8500_regulator_platform_data; +struct ab8500_codec_platform_data; +struct ab8500_sysctrl_platform_data; + +/** + * struct ab8500_platform_data - AB8500 platform data + * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used + * @init: board-specific initialization after detection of ab8500 + * @regulator: machine-specific constraints for regulators + */ +struct ab8500_platform_data { + void (*init) (struct ab8500 *); + struct ab8500_regulator_platform_data *regulator; + struct ab8500_codec_platform_data *codec; + struct ab8500_sysctrl_platform_data *sysctrl; +}; + +extern int ab8500_init(struct ab8500 *ab8500, + enum ab8500_version version); +extern int ab8500_exit(struct ab8500 *ab8500); + +extern int ab8500_suspend(struct ab8500 *ab8500); + +static inline int is_ab8500(struct ab8500 *ab) +{ + return ab->version == AB8500_VERSION_AB8500; +} + +static inline int is_ab8505(struct ab8500 *ab) +{ + return ab->version == AB8500_VERSION_AB8505; +} + +static inline int is_ab9540(struct ab8500 *ab) +{ + return ab->version == AB8500_VERSION_AB9540; +} + +static inline int is_ab8540(struct ab8500 *ab) +{ + return ab->version == AB8500_VERSION_AB8540; +} + +/* exclude also ab8505, ab9540... */ +static inline int is_ab8500_1p0_or_earlier(struct ab8500 *ab) +{ + return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P0)); +} + +/* exclude also ab8505, ab9540... */ +static inline int is_ab8500_1p1_or_earlier(struct ab8500 *ab) +{ + return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT1P1)); +} + +/* exclude also ab8505, ab9540... */ +static inline int is_ab8500_2p0_or_earlier(struct ab8500 *ab) +{ + return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT2P0)); +} + +static inline int is_ab8500_3p3_or_earlier(struct ab8500 *ab) +{ + return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT3P3)); +} + +/* exclude also ab8505, ab9540... */ +static inline int is_ab8500_2p0(struct ab8500 *ab) +{ + return (is_ab8500(ab) && (ab->chip_id == AB8500_CUT2P0)); +} + +static inline int is_ab8505_1p0_or_earlier(struct ab8500 *ab) +{ + return (is_ab8505(ab) && (ab->chip_id <= AB8500_CUT1P0)); +} + +static inline int is_ab8505_2p0(struct ab8500 *ab) +{ + return (is_ab8505(ab) && (ab->chip_id == AB8500_CUT2P0)); +} + +static inline int is_ab9540_1p0_or_earlier(struct ab8500 *ab) +{ + return (is_ab9540(ab) && (ab->chip_id <= AB8500_CUT1P0)); +} + +static inline int is_ab9540_2p0(struct ab8500 *ab) +{ + return (is_ab9540(ab) && (ab->chip_id == AB8500_CUT2P0)); +} + +/* + * Be careful, the marketing name for this chip is 2.1 + * but the value read from the chip is 3.0 (0x30) + */ +static inline int is_ab9540_3p0(struct ab8500 *ab) +{ + return (is_ab9540(ab) && (ab->chip_id == AB8500_CUT3P0)); +} + +static inline int is_ab8540_1p0_or_earlier(struct ab8500 *ab) +{ + return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT1P0); +} + +static inline int is_ab8540_1p1_or_earlier(struct ab8500 *ab) +{ + return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT1P1); +} + +static inline int is_ab8540_1p2_or_earlier(struct ab8500 *ab) +{ + return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT1P2); +} + +static inline int is_ab8540_2p0_or_earlier(struct ab8500 *ab) +{ + return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT2P0); +} + +static inline int is_ab8540_2p0(struct ab8500 *ab) +{ + return is_ab8540(ab) && (ab->chip_id == AB8500_CUT2P0); +} + +static inline int is_ab8505_2p0_earlier(struct ab8500 *ab) +{ + return (is_ab8505(ab) && (ab->chip_id < AB8500_CUT2P0)); +} + +static inline int is_ab9540_2p0_or_earlier(struct ab8500 *ab) +{ + return (is_ab9540(ab) && (ab->chip_id < AB8500_CUT2P0)); +} + +void ab8500_override_turn_on_stat(u8 mask, u8 set); + +#ifdef CONFIG_AB8500_DEBUG +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); +void ab8500_dump_all_banks(struct device *dev); +void ab8500_debug_register_interrupt(int line); +#else +static inline void ab8500_dump_all_banks(struct device *dev) {} +static inline void ab8500_debug_register_interrupt(int line) {} +#endif + +#endif /* MFD_AB8500_H */ diff --git a/kernel/include/linux/mfd/abx500/ux500_chargalg.h b/kernel/include/linux/mfd/abx500/ux500_chargalg.h new file mode 100644 index 000000000..67703f23e --- /dev/null +++ b/kernel/include/linux/mfd/abx500/ux500_chargalg.h @@ -0,0 +1,55 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * Author: Johan Gardsmark <johan.gardsmark@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL), version 2 + */ + +#ifndef _UX500_CHARGALG_H +#define _UX500_CHARGALG_H + +#include <linux/power_supply.h> + +/* + * Valid only for supplies of type: + * - POWER_SUPPLY_TYPE_MAINS, + * - POWER_SUPPLY_TYPE_USB, + * because only them store as drv_data pointer to struct ux500_charger. + */ +#define psy_to_ux500_charger(x) power_supply_get_drvdata(psy) + +/* Forward declaration */ +struct ux500_charger; + +struct ux500_charger_ops { + int (*enable) (struct ux500_charger *, int, int, int); + int (*check_enable) (struct ux500_charger *, int, int); + int (*kick_wd) (struct ux500_charger *); + int (*update_curr) (struct ux500_charger *, int); + int (*pp_enable) (struct ux500_charger *, bool); + int (*pre_chg_enable) (struct ux500_charger *, bool); +}; + +/** + * struct ux500_charger - power supply ux500 charger sub class + * @psy power supply base class + * @ops ux500 charger operations + * @max_out_volt maximum output charger voltage in mV + * @max_out_curr maximum output charger current in mA + * @enabled indicates if this charger is used or not + * @external external charger unit (pm2xxx) + * @power_path USB power path support + */ +struct ux500_charger { + struct power_supply *psy; + struct ux500_charger_ops ops; + int max_out_volt; + int max_out_curr; + int wdt_refresh; + bool enabled; + bool external; + bool power_path; +}; + +extern struct blocking_notifier_head charger_notifier_list; + +#endif |