1 files changed, 140 insertions, 5 deletions

diff --git a/kernel/include/linux/jiffies.h b/kernel/include/linux/jiffies.h
index c367cbdf7..5fdc55312 100644
--- a/kernel/include/linux/jiffies.h
+++ b/kernel/include/linux/jiffies.h
@@ -7,6 +7,7 @@
 #include <linux/time.h>
 #include <linux/timex.h>
 #include <asm/param.h>			/* for HZ */
+#include <generated/timeconst.h>
 
 /*
  * The following defines establish the engineering parameters of the PLL
@@ -288,11 +289,145 @@ static inline u64 jiffies_to_nsecs(const unsigned long j)
 	return (u64)jiffies_to_usecs(j) * NSEC_PER_USEC;
 }
 
-extern unsigned long msecs_to_jiffies(const unsigned int m);
-extern unsigned long usecs_to_jiffies(const unsigned int u);
-extern unsigned long timespec_to_jiffies(const struct timespec *value);
-extern void jiffies_to_timespec(const unsigned long jiffies,
-				struct timespec *value);
+extern unsigned long __msecs_to_jiffies(const unsigned int m);
+#if HZ <= MSEC_PER_SEC && !(MSEC_PER_SEC % HZ)
+/*
+ * HZ is equal to or smaller than 1000, and 1000 is a nice round
+ * multiple of HZ, divide with the factor between them, but round
+ * upwards:
+ */
+static inline unsigned long _msecs_to_jiffies(const unsigned int m)
+{
+	return (m + (MSEC_PER_SEC / HZ) - 1) / (MSEC_PER_SEC / HZ);
+}
+#elif HZ > MSEC_PER_SEC && !(HZ % MSEC_PER_SEC)
+/*
+ * HZ is larger than 1000, and HZ is a nice round multiple of 1000 -
+ * simply multiply with the factor between them.
+ *
+ * But first make sure the multiplication result cannot overflow:
+ */
+static inline unsigned long _msecs_to_jiffies(const unsigned int m)
+{
+	if (m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
+		return MAX_JIFFY_OFFSET;
+	return m * (HZ / MSEC_PER_SEC);
+}
+#else
+/*
+ * Generic case - multiply, round and divide. But first check that if
+ * we are doing a net multiplication, that we wouldn't overflow:
+ */
+static inline unsigned long _msecs_to_jiffies(const unsigned int m)
+{
+	if (HZ > MSEC_PER_SEC && m > jiffies_to_msecs(MAX_JIFFY_OFFSET))
+		return MAX_JIFFY_OFFSET;
+
+	return (MSEC_TO_HZ_MUL32 * m + MSEC_TO_HZ_ADJ32) >> MSEC_TO_HZ_SHR32;
+}
+#endif
+/**
+ * msecs_to_jiffies: - convert milliseconds to jiffies
+ * @m:	time in milliseconds
+ *
+ * conversion is done as follows:
+ *
+ * - negative values mean 'infinite timeout' (MAX_JIFFY_OFFSET)
+ *
+ * - 'too large' values [that would result in larger than
+ *   MAX_JIFFY_OFFSET values] mean 'infinite timeout' too.
+ *
+ * - all other values are converted to jiffies by either multiplying
+ *   the input value by a factor or dividing it with a factor and
+ *   handling any 32-bit overflows.
+ *   for the details see __msecs_to_jiffies()
+ *
+ * msecs_to_jiffies() checks for the passed in value being a constant
+ * via __builtin_constant_p() allowing gcc to eliminate most of the
+ * code, __msecs_to_jiffies() is called if the value passed does not
+ * allow constant folding and the actual conversion must be done at
+ * runtime.
+ * the HZ range specific helpers _msecs_to_jiffies() are called both
+ * directly here and from __msecs_to_jiffies() in the case where
+ * constant folding is not possible.
+ */
+static __always_inline unsigned long msecs_to_jiffies(const unsigned int m)
+{
+	if (__builtin_constant_p(m)) {
+		if ((int)m < 0)
+			return MAX_JIFFY_OFFSET;
+		return _msecs_to_jiffies(m);
+	} else {
+		return __msecs_to_jiffies(m);
+	}
+}
+
+extern unsigned long __usecs_to_jiffies(const unsigned int u);
+#if !(USEC_PER_SEC % HZ)
+static inline unsigned long _usecs_to_jiffies(const unsigned int u)
+{
+	return (u + (USEC_PER_SEC / HZ) - 1) / (USEC_PER_SEC / HZ);
+}
+#else
+static inline unsigned long _usecs_to_jiffies(const unsigned int u)
+{
+	return (USEC_TO_HZ_MUL32 * u + USEC_TO_HZ_ADJ32)
+		>> USEC_TO_HZ_SHR32;
+}
+#endif
+
+/**
+ * usecs_to_jiffies: - convert microseconds to jiffies
+ * @u:	time in microseconds
+ *
+ * conversion is done as follows:
+ *
+ * - 'too large' values [that would result in larger than
+ *   MAX_JIFFY_OFFSET values] mean 'infinite timeout' too.
+ *
+ * - all other values are converted to jiffies by either multiplying
+ *   the input value by a factor or dividing it with a factor and
+ *   handling any 32-bit overflows as for msecs_to_jiffies.
+ *
+ * usecs_to_jiffies() checks for the passed in value being a constant
+ * via __builtin_constant_p() allowing gcc to eliminate most of the
+ * code, __usecs_to_jiffies() is called if the value passed does not
+ * allow constant folding and the actual conversion must be done at
+ * runtime.
+ * the HZ range specific helpers _usecs_to_jiffies() are called both
+ * directly here and from __msecs_to_jiffies() in the case where
+ * constant folding is not possible.
+ */
+static __always_inline unsigned long usecs_to_jiffies(const unsigned int u)
+{
+	if (__builtin_constant_p(u)) {
+		if (u > jiffies_to_usecs(MAX_JIFFY_OFFSET))
+			return MAX_JIFFY_OFFSET;
+		return _usecs_to_jiffies(u);
+	} else {
+		return __usecs_to_jiffies(u);
+	}
+}
+
+extern unsigned long timespec64_to_jiffies(const struct timespec64 *value);
+extern void jiffies_to_timespec64(const unsigned long jiffies,
+				  struct timespec64 *value);
+static inline unsigned long timespec_to_jiffies(const struct timespec *value)
+{
+	struct timespec64 ts = timespec_to_timespec64(*value);
+
+	return timespec64_to_jiffies(&ts);
+}
+
+static inline void jiffies_to_timespec(const unsigned long jiffies,
+				       struct timespec *value)
+{
+	struct timespec64 ts;
+
+	jiffies_to_timespec64(jiffies, &ts);
+	*value = timespec64_to_timespec(ts);
+}
+
 extern unsigned long timeval_to_jiffies(const struct timeval *value);
 extern void jiffies_to_timeval(const unsigned long jiffies,
 			       struct timeval *value);