summaryrefslogtreecommitdiffstats
path: root/kernel/include/linux/isdnif.h
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/include/linux/isdnif.h')
-rw-r--r--kernel/include/linux/isdnif.h505
1 files changed, 505 insertions, 0 deletions
diff --git a/kernel/include/linux/isdnif.h b/kernel/include/linux/isdnif.h
new file mode 100644
index 000000000..0fc6ff276
--- /dev/null
+++ b/kernel/include/linux/isdnif.h
@@ -0,0 +1,505 @@
+/* $Id: isdnif.h,v 1.43.2.2 2004/01/12 23:08:35 keil Exp $
+ *
+ * Linux ISDN subsystem
+ * Definition of the interface between the subsystem and its low-level drivers.
+ *
+ * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de)
+ * Copyright 1995,96 Thinking Objects Software GmbH Wuerzburg
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+#ifndef __ISDNIF_H__
+#define __ISDNIF_H__
+
+
+#include <linux/skbuff.h>
+#include <uapi/linux/isdnif.h>
+
+/***************************************************************************/
+/* Extensions made by Werner Cornelius (werner@ikt.de) */
+/* */
+/* The proceed command holds a incoming call in a state to leave processes */
+/* enough time to check whether ist should be accepted. */
+/* The PROT_IO Command extends the interface to make protocol dependent */
+/* features available (call diversion, call waiting...). */
+/* */
+/* The PROT_IO Command is executed with the desired driver id and the arg */
+/* parameter coded as follows: */
+/* The lower 8 bits of arg contain the desired protocol from ISDN_PTYPE */
+/* definitions. The upper 24 bits represent the protocol specific cmd/stat.*/
+/* Any additional data is protocol and command specific. */
+/* This mechanism also applies to the statcallb callback STAT_PROT. */
+/* */
+/* This suggested extension permits an easy expansion of protocol specific */
+/* handling. Extensions may be added at any time without changing the HL */
+/* driver code and not getting conflicts without certifications. */
+/* The well known CAPI 2.0 interface handles such extensions in a similar */
+/* way. Perhaps a protocol specific module may be added and separately */
+/* loaded and linked to the basic isdn module for handling. */
+/***************************************************************************/
+
+/*****************/
+/* DSS1 commands */
+/*****************/
+#define DSS1_CMD_INVOKE ((0x00 << 8) | ISDN_PTYPE_EURO) /* invoke a supplementary service */
+#define DSS1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_EURO) /* abort a invoke cmd */
+
+/*******************************/
+/* DSS1 Status callback values */
+/*******************************/
+#define DSS1_STAT_INVOKE_RES ((0x80 << 8) | ISDN_PTYPE_EURO) /* Result for invocation */
+#define DSS1_STAT_INVOKE_ERR ((0x81 << 8) | ISDN_PTYPE_EURO) /* Error Return for invocation */
+#define DSS1_STAT_INVOKE_BRD ((0x82 << 8) | ISDN_PTYPE_EURO) /* Deliver invoke broadcast info */
+
+
+/*********************************************************************/
+/* structures for DSS1 commands and callback */
+/* */
+/* An action is invoked by sending a DSS1_CMD_INVOKE. The ll_id, proc*/
+/* timeout, datalen and data fields must be set before calling. */
+/* */
+/* The return value is a positive hl_id value also delivered in the */
+/* hl_id field. A value of zero signals no more left hl_id capacitys.*/
+/* A negative return value signals errors in LL. So if the return */
+/* value is <= 0 no action in LL will be taken -> request ignored */
+/* */
+/* The timeout field must be filled with a positive value specifying */
+/* the amount of time the INVOKED process waits for a reaction from */
+/* the network. */
+/* If a response (either error or result) is received during this */
+/* intervall, a reporting callback is initiated and the process will */
+/* be deleted, the hl identifier will be freed. */
+/* If no response is received during the specified intervall, a error*/
+/* callback is initiated with timeout set to -1 and a datalen set */
+/* to 0. */
+/* If timeout is set to a value <= 0 during INVOCATION the process is*/
+/* immediately deleted after sending the data. No callback occurs ! */
+/* */
+/* A currently waiting process may be aborted with INVOKE_ABORT. No */
+/* callback will occur when a process has been aborted. */
+/* */
+/* Broadcast invoke frames from the network are reported via the */
+/* STAT_INVOKE_BRD callback. The ll_id is set to 0, the other fields */
+/* are supplied by the network and not by the HL. */
+/*********************************************************************/
+
+/*****************/
+/* NI1 commands */
+/*****************/
+#define NI1_CMD_INVOKE ((0x00 << 8) | ISDN_PTYPE_NI1) /* invoke a supplementary service */
+#define NI1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_NI1) /* abort a invoke cmd */
+
+/*******************************/
+/* NI1 Status callback values */
+/*******************************/
+#define NI1_STAT_INVOKE_RES ((0x80 << 8) | ISDN_PTYPE_NI1) /* Result for invocation */
+#define NI1_STAT_INVOKE_ERR ((0x81 << 8) | ISDN_PTYPE_NI1) /* Error Return for invocation */
+#define NI1_STAT_INVOKE_BRD ((0x82 << 8) | ISDN_PTYPE_NI1) /* Deliver invoke broadcast info */
+
+typedef struct
+ { ulong ll_id; /* ID supplied by LL when executing */
+ /* a command and returned by HL for */
+ /* INVOKE_RES and INVOKE_ERR */
+ int hl_id; /* ID supplied by HL when called */
+ /* for executing a cmd and delivered */
+ /* for results and errors */
+ /* must be supplied by LL when aborting*/
+ int proc; /* invoke procedure used by CMD_INVOKE */
+ /* returned by callback and broadcast */
+ int timeout; /* timeout for INVOKE CMD in ms */
+ /* -1 in stat callback when timed out */
+ /* error value when error callback */
+ int datalen; /* length of cmd or stat data */
+ u_char *data;/* pointer to data delivered or send */
+ } isdn_cmd_stat;
+
+/*
+ * Commands from linklevel to lowlevel
+ *
+ */
+#define ISDN_CMD_IOCTL 0 /* Perform ioctl */
+#define ISDN_CMD_DIAL 1 /* Dial out */
+#define ISDN_CMD_ACCEPTD 2 /* Accept an incoming call on D-Chan. */
+#define ISDN_CMD_ACCEPTB 3 /* Request B-Channel connect. */
+#define ISDN_CMD_HANGUP 4 /* Hangup */
+#define ISDN_CMD_CLREAZ 5 /* Clear EAZ(s) of channel */
+#define ISDN_CMD_SETEAZ 6 /* Set EAZ(s) of channel */
+#define ISDN_CMD_GETEAZ 7 /* Get EAZ(s) of channel */
+#define ISDN_CMD_SETSIL 8 /* Set Service-Indicator-List of channel */
+#define ISDN_CMD_GETSIL 9 /* Get Service-Indicator-List of channel */
+#define ISDN_CMD_SETL2 10 /* Set B-Chan. Layer2-Parameter */
+#define ISDN_CMD_GETL2 11 /* Get B-Chan. Layer2-Parameter */
+#define ISDN_CMD_SETL3 12 /* Set B-Chan. Layer3-Parameter */
+#define ISDN_CMD_GETL3 13 /* Get B-Chan. Layer3-Parameter */
+// #define ISDN_CMD_LOCK 14 /* Signal usage by upper levels */
+// #define ISDN_CMD_UNLOCK 15 /* Release usage-lock */
+#define ISDN_CMD_SUSPEND 16 /* Suspend connection */
+#define ISDN_CMD_RESUME 17 /* Resume connection */
+#define ISDN_CMD_PROCEED 18 /* Proceed with call establishment */
+#define ISDN_CMD_ALERT 19 /* Alert after Proceeding */
+#define ISDN_CMD_REDIR 20 /* Redir a incoming call */
+#define ISDN_CMD_PROT_IO 21 /* Protocol specific commands */
+#define CAPI_PUT_MESSAGE 22 /* CAPI message send down or up */
+#define ISDN_CMD_FAXCMD 23 /* FAX commands to HL-driver */
+#define ISDN_CMD_AUDIO 24 /* DSP, DTMF, ... settings */
+
+/*
+ * Status-Values delivered from lowlevel to linklevel via
+ * statcallb().
+ *
+ */
+#define ISDN_STAT_STAVAIL 256 /* Raw status-data available */
+#define ISDN_STAT_ICALL 257 /* Incoming call detected */
+#define ISDN_STAT_RUN 258 /* Signal protocol-code is running */
+#define ISDN_STAT_STOP 259 /* Signal halt of protocol-code */
+#define ISDN_STAT_DCONN 260 /* Signal D-Channel connect */
+#define ISDN_STAT_BCONN 261 /* Signal B-Channel connect */
+#define ISDN_STAT_DHUP 262 /* Signal D-Channel disconnect */
+#define ISDN_STAT_BHUP 263 /* Signal B-Channel disconnect */
+#define ISDN_STAT_CINF 264 /* Charge-Info */
+#define ISDN_STAT_LOAD 265 /* Signal new lowlevel-driver is loaded */
+#define ISDN_STAT_UNLOAD 266 /* Signal unload of lowlevel-driver */
+#define ISDN_STAT_BSENT 267 /* Signal packet sent */
+#define ISDN_STAT_NODCH 268 /* Signal no D-Channel */
+#define ISDN_STAT_ADDCH 269 /* Add more Channels */
+#define ISDN_STAT_CAUSE 270 /* Cause-Message */
+#define ISDN_STAT_ICALLW 271 /* Incoming call without B-chan waiting */
+#define ISDN_STAT_REDIR 272 /* Redir result */
+#define ISDN_STAT_PROT 273 /* protocol IO specific callback */
+#define ISDN_STAT_DISPLAY 274 /* deliver a received display message */
+#define ISDN_STAT_L1ERR 275 /* Signal Layer-1 Error */
+#define ISDN_STAT_FAXIND 276 /* FAX indications from HL-driver */
+#define ISDN_STAT_AUDIO 277 /* DTMF, DSP indications */
+#define ISDN_STAT_DISCH 278 /* Disable/Enable channel usage */
+
+/*
+ * Audio commands
+ */
+#define ISDN_AUDIO_SETDD 0 /* Set DTMF detection */
+#define ISDN_AUDIO_DTMF 1 /* Rx/Tx DTMF */
+
+/*
+ * Values for errcode field
+ */
+#define ISDN_STAT_L1ERR_SEND 1
+#define ISDN_STAT_L1ERR_RECV 2
+
+/*
+ * Values for feature-field of interface-struct.
+ */
+/* Layer 2 */
+#define ISDN_FEATURE_L2_X75I (0x0001 << ISDN_PROTO_L2_X75I)
+#define ISDN_FEATURE_L2_X75UI (0x0001 << ISDN_PROTO_L2_X75UI)
+#define ISDN_FEATURE_L2_X75BUI (0x0001 << ISDN_PROTO_L2_X75BUI)
+#define ISDN_FEATURE_L2_HDLC (0x0001 << ISDN_PROTO_L2_HDLC)
+#define ISDN_FEATURE_L2_TRANS (0x0001 << ISDN_PROTO_L2_TRANS)
+#define ISDN_FEATURE_L2_X25DTE (0x0001 << ISDN_PROTO_L2_X25DTE)
+#define ISDN_FEATURE_L2_X25DCE (0x0001 << ISDN_PROTO_L2_X25DCE)
+#define ISDN_FEATURE_L2_V11096 (0x0001 << ISDN_PROTO_L2_V11096)
+#define ISDN_FEATURE_L2_V11019 (0x0001 << ISDN_PROTO_L2_V11019)
+#define ISDN_FEATURE_L2_V11038 (0x0001 << ISDN_PROTO_L2_V11038)
+#define ISDN_FEATURE_L2_MODEM (0x0001 << ISDN_PROTO_L2_MODEM)
+#define ISDN_FEATURE_L2_FAX (0x0001 << ISDN_PROTO_L2_FAX)
+#define ISDN_FEATURE_L2_HDLC_56K (0x0001 << ISDN_PROTO_L2_HDLC_56K)
+
+#define ISDN_FEATURE_L2_MASK (0x0FFFF) /* Max. 16 protocols */
+#define ISDN_FEATURE_L2_SHIFT (0)
+
+/* Layer 3 */
+#define ISDN_FEATURE_L3_TRANS (0x10000 << ISDN_PROTO_L3_TRANS)
+#define ISDN_FEATURE_L3_TRANSDSP (0x10000 << ISDN_PROTO_L3_TRANSDSP)
+#define ISDN_FEATURE_L3_FCLASS2 (0x10000 << ISDN_PROTO_L3_FCLASS2)
+#define ISDN_FEATURE_L3_FCLASS1 (0x10000 << ISDN_PROTO_L3_FCLASS1)
+
+#define ISDN_FEATURE_L3_MASK (0x0FF0000) /* Max. 8 Protocols */
+#define ISDN_FEATURE_L3_SHIFT (16)
+
+/* Signaling */
+#define ISDN_FEATURE_P_UNKNOWN (0x1000000 << ISDN_PTYPE_UNKNOWN)
+#define ISDN_FEATURE_P_1TR6 (0x1000000 << ISDN_PTYPE_1TR6)
+#define ISDN_FEATURE_P_EURO (0x1000000 << ISDN_PTYPE_EURO)
+#define ISDN_FEATURE_P_NI1 (0x1000000 << ISDN_PTYPE_NI1)
+
+#define ISDN_FEATURE_P_MASK (0x0FF000000) /* Max. 8 Protocols */
+#define ISDN_FEATURE_P_SHIFT (24)
+
+typedef struct setup_parm {
+ unsigned char phone[32]; /* Remote Phone-Number */
+ unsigned char eazmsn[32]; /* Local EAZ or MSN */
+ unsigned char si1; /* Service Indicator 1 */
+ unsigned char si2; /* Service Indicator 2 */
+ unsigned char plan; /* Numbering plan */
+ unsigned char screen; /* Screening info */
+} setup_parm;
+
+
+#ifdef CONFIG_ISDN_TTY_FAX
+/* T.30 Fax G3 */
+
+#define FAXIDLEN 21
+
+typedef struct T30_s {
+ /* session parameters */
+ __u8 resolution;
+ __u8 rate;
+ __u8 width;
+ __u8 length;
+ __u8 compression;
+ __u8 ecm;
+ __u8 binary;
+ __u8 scantime;
+ __u8 id[FAXIDLEN];
+ /* additional parameters */
+ __u8 phase;
+ __u8 direction;
+ __u8 code;
+ __u8 badlin;
+ __u8 badmul;
+ __u8 bor;
+ __u8 fet;
+ __u8 pollid[FAXIDLEN];
+ __u8 cq;
+ __u8 cr;
+ __u8 ctcrty;
+ __u8 minsp;
+ __u8 phcto;
+ __u8 rel;
+ __u8 nbc;
+ /* remote station parameters */
+ __u8 r_resolution;
+ __u8 r_rate;
+ __u8 r_width;
+ __u8 r_length;
+ __u8 r_compression;
+ __u8 r_ecm;
+ __u8 r_binary;
+ __u8 r_scantime;
+ __u8 r_id[FAXIDLEN];
+ __u8 r_code;
+} __packed T30_s;
+
+#define ISDN_TTY_FAX_CONN_IN 0
+#define ISDN_TTY_FAX_CONN_OUT 1
+
+#define ISDN_TTY_FAX_FCON 0
+#define ISDN_TTY_FAX_DIS 1
+#define ISDN_TTY_FAX_FTT 2
+#define ISDN_TTY_FAX_MCF 3
+#define ISDN_TTY_FAX_DCS 4
+#define ISDN_TTY_FAX_TRAIN_OK 5
+#define ISDN_TTY_FAX_EOP 6
+#define ISDN_TTY_FAX_EOM 7
+#define ISDN_TTY_FAX_MPS 8
+#define ISDN_TTY_FAX_DTC 9
+#define ISDN_TTY_FAX_RID 10
+#define ISDN_TTY_FAX_HNG 11
+#define ISDN_TTY_FAX_DT 12
+#define ISDN_TTY_FAX_FCON_I 13
+#define ISDN_TTY_FAX_DR 14
+#define ISDN_TTY_FAX_ET 15
+#define ISDN_TTY_FAX_CFR 16
+#define ISDN_TTY_FAX_PTS 17
+#define ISDN_TTY_FAX_SENT 18
+
+#define ISDN_FAX_PHASE_IDLE 0
+#define ISDN_FAX_PHASE_A 1
+#define ISDN_FAX_PHASE_B 2
+#define ISDN_FAX_PHASE_C 3
+#define ISDN_FAX_PHASE_D 4
+#define ISDN_FAX_PHASE_E 5
+
+#endif /* TTY_FAX */
+
+#define ISDN_FAX_CLASS1_FAE 0
+#define ISDN_FAX_CLASS1_FTS 1
+#define ISDN_FAX_CLASS1_FRS 2
+#define ISDN_FAX_CLASS1_FTM 3
+#define ISDN_FAX_CLASS1_FRM 4
+#define ISDN_FAX_CLASS1_FTH 5
+#define ISDN_FAX_CLASS1_FRH 6
+#define ISDN_FAX_CLASS1_CTRL 7
+
+#define ISDN_FAX_CLASS1_OK 0
+#define ISDN_FAX_CLASS1_CONNECT 1
+#define ISDN_FAX_CLASS1_NOCARR 2
+#define ISDN_FAX_CLASS1_ERROR 3
+#define ISDN_FAX_CLASS1_FCERROR 4
+#define ISDN_FAX_CLASS1_QUERY 5
+
+typedef struct {
+ __u8 cmd;
+ __u8 subcmd;
+ __u8 para[50];
+} aux_s;
+
+#define AT_COMMAND 0
+#define AT_EQ_VALUE 1
+#define AT_QUERY 2
+#define AT_EQ_QUERY 3
+
+/* CAPI structs */
+
+/* this is compatible to the old union size */
+#define MAX_CAPI_PARA_LEN 50
+
+typedef struct {
+ /* Header */
+ __u16 Length;
+ __u16 ApplId;
+ __u8 Command;
+ __u8 Subcommand;
+ __u16 Messagenumber;
+
+ /* Parameter */
+ union {
+ __u32 Controller;
+ __u32 PLCI;
+ __u32 NCCI;
+ } adr;
+ __u8 para[MAX_CAPI_PARA_LEN];
+} capi_msg;
+
+/*
+ * Structure for exchanging above infos
+ *
+ */
+typedef struct {
+ int driver; /* Lowlevel-Driver-ID */
+ int command; /* Command or Status (see above) */
+ ulong arg; /* Additional Data */
+ union {
+ ulong errcode; /* Type of error with STAT_L1ERR */
+ int length; /* Amount of bytes sent with STAT_BSENT */
+ u_char num[50]; /* Additional Data */
+ setup_parm setup;/* For SETUP msg */
+ capi_msg cmsg; /* For CAPI like messages */
+ char display[85];/* display message data */
+ isdn_cmd_stat isdn_io; /* ISDN IO-parameter/result */
+ aux_s aux; /* for modem commands/indications */
+#ifdef CONFIG_ISDN_TTY_FAX
+ T30_s *fax; /* Pointer to ttys fax struct */
+#endif
+ ulong userdata; /* User Data */
+ } parm;
+} isdn_ctrl;
+
+#define dss1_io isdn_io
+#define ni1_io isdn_io
+
+/*
+ * The interface-struct itself (initialized at load-time of lowlevel-driver)
+ *
+ * See Documentation/isdn/INTERFACE for a description, how the communication
+ * between the ISDN subsystem and its drivers is done.
+ *
+ */
+typedef struct {
+ struct module *owner;
+
+ /* Number of channels supported by this driver
+ */
+ int channels;
+
+ /*
+ * Maximum Size of transmit/receive-buffer this driver supports.
+ */
+ int maxbufsize;
+
+ /* Feature-Flags for this driver.
+ * See defines ISDN_FEATURE_... for Values
+ */
+ unsigned long features;
+
+ /*
+ * Needed for calculating
+ * dev->hard_header_len = linklayer header + hl_hdrlen;
+ * Drivers, not supporting sk_buff's should set this to 0.
+ */
+ unsigned short hl_hdrlen;
+
+ /*
+ * Receive-Callback using sk_buff's
+ * Parameters:
+ * int Driver-ID
+ * int local channel-number (0 ...)
+ * struct sk_buff *skb received Data
+ */
+ void (*rcvcallb_skb)(int, int, struct sk_buff *);
+
+ /* Status-Callback
+ * Parameters:
+ * isdn_ctrl*
+ * driver = Driver ID.
+ * command = One of above ISDN_STAT_... constants.
+ * arg = depending on status-type.
+ * num = depending on status-type.
+ */
+ int (*statcallb)(isdn_ctrl*);
+
+ /* Send command
+ * Parameters:
+ * isdn_ctrl*
+ * driver = Driver ID.
+ * command = One of above ISDN_CMD_... constants.
+ * arg = depending on command.
+ * num = depending on command.
+ */
+ int (*command)(isdn_ctrl*);
+
+ /*
+ * Send data using sk_buff's
+ * Parameters:
+ * int driverId
+ * int local channel-number (0...)
+ * int Flag: Need ACK for this packet.
+ * struct sk_buff *skb Data to send
+ */
+ int (*writebuf_skb) (int, int, int, struct sk_buff *);
+
+ /* Send raw D-Channel-Commands
+ * Parameters:
+ * u_char pointer data
+ * int length of data
+ * int driverId
+ * int local channel-number (0 ...)
+ */
+ int (*writecmd)(const u_char __user *, int, int, int);
+
+ /* Read raw Status replies
+ * u_char pointer data (volatile)
+ * int length of buffer
+ * int driverId
+ * int local channel-number (0 ...)
+ */
+ int (*readstat)(u_char __user *, int, int, int);
+
+ char id[20];
+} isdn_if;
+
+/*
+ * Function which must be called by lowlevel-driver at loadtime with
+ * the following fields of above struct set:
+ *
+ * channels Number of channels that will be supported.
+ * hl_hdrlen Space to preserve in sk_buff's when sending. Drivers, not
+ * supporting sk_buff's should set this to 0.
+ * command Address of Command-Handler.
+ * features Bitwise coded Features of this driver. (use ISDN_FEATURE_...)
+ * writebuf_skb Address of Skbuff-Send-Handler.
+ * writecmd " " D-Channel " which accepts raw D-Ch-Commands.
+ * readstat " " D-Channel " which delivers raw Status-Data.
+ *
+ * The linklevel-driver fills the following fields:
+ *
+ * channels Driver-ID assigned to this driver. (Must be used on all
+ * subsequent callbacks.
+ * rcvcallb_skb Address of handler for received Skbuff's.
+ * statcallb " " " for status-changes.
+ *
+ */
+extern int register_isdn(isdn_if*);
+#include <asm/uaccess.h>
+
+#endif /* __ISDNIF_H__ */