summaryrefslogtreecommitdiffstats
path: root/kernel/include/linux/ide.h
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/include/linux/ide.h')
-rw-r--r--kernel/include/linux/ide.h1554
1 files changed, 1554 insertions, 0 deletions
diff --git a/kernel/include/linux/ide.h b/kernel/include/linux/ide.h
new file mode 100644
index 000000000..93b5ca754
--- /dev/null
+++ b/kernel/include/linux/ide.h
@@ -0,0 +1,1554 @@
+#ifndef _IDE_H
+#define _IDE_H
+/*
+ * linux/include/linux/ide.h
+ *
+ * Copyright (C) 1994-2002 Linus Torvalds & authors
+ */
+
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/ata.h>
+#include <linux/blkdev.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/bio.h>
+#include <linux/pci.h>
+#include <linux/completion.h>
+#include <linux/pm.h>
+#include <linux/mutex.h>
+/* for request_sense */
+#include <linux/cdrom.h>
+#include <asm/byteorder.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_CRIS) || defined(CONFIG_FRV) || defined(CONFIG_MN10300)
+# define SUPPORT_VLB_SYNC 0
+#else
+# define SUPPORT_VLB_SYNC 1
+#endif
+
+/*
+ * Probably not wise to fiddle with these
+ */
+#define IDE_DEFAULT_MAX_FAILURES 1
+#define ERROR_MAX 8 /* Max read/write errors per sector */
+#define ERROR_RESET 3 /* Reset controller every 4th retry */
+#define ERROR_RECAL 1 /* Recalibrate every 2nd retry */
+
+struct device;
+
+/* Error codes returned in rq->errors to the higher part of the driver. */
+enum {
+ IDE_DRV_ERROR_GENERAL = 101,
+ IDE_DRV_ERROR_FILEMARK = 102,
+ IDE_DRV_ERROR_EOD = 103,
+};
+
+/*
+ * Definitions for accessing IDE controller registers
+ */
+#define IDE_NR_PORTS (10)
+
+struct ide_io_ports {
+ unsigned long data_addr;
+
+ union {
+ unsigned long error_addr; /* read: error */
+ unsigned long feature_addr; /* write: feature */
+ };
+
+ unsigned long nsect_addr;
+ unsigned long lbal_addr;
+ unsigned long lbam_addr;
+ unsigned long lbah_addr;
+
+ unsigned long device_addr;
+
+ union {
+ unsigned long status_addr; /*  read: status  */
+ unsigned long command_addr; /* write: command */
+ };
+
+ unsigned long ctl_addr;
+
+ unsigned long irq_addr;
+};
+
+#define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good))
+
+#define BAD_R_STAT (ATA_BUSY | ATA_ERR)
+#define BAD_W_STAT (BAD_R_STAT | ATA_DF)
+#define BAD_STAT (BAD_R_STAT | ATA_DRQ)
+#define DRIVE_READY (ATA_DRDY | ATA_DSC)
+
+#define BAD_CRC (ATA_ABORTED | ATA_ICRC)
+
+#define SATA_NR_PORTS (3) /* 16 possible ?? */
+
+#define SATA_STATUS_OFFSET (0)
+#define SATA_ERROR_OFFSET (1)
+#define SATA_CONTROL_OFFSET (2)
+
+/*
+ * Our Physical Region Descriptor (PRD) table should be large enough
+ * to handle the biggest I/O request we are likely to see. Since requests
+ * can have no more than 256 sectors, and since the typical blocksize is
+ * two or more sectors, we could get by with a limit of 128 entries here for
+ * the usual worst case. Most requests seem to include some contiguous blocks,
+ * further reducing the number of table entries required.
+ *
+ * The driver reverts to PIO mode for individual requests that exceed
+ * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
+ * 100% of all crazy scenarios here is not necessary.
+ *
+ * As it turns out though, we must allocate a full 4KB page for this,
+ * so the two PRD tables (ide0 & ide1) will each get half of that,
+ * allowing each to have about 256 entries (8 bytes each) from this.
+ */
+#define PRD_BYTES 8
+#define PRD_ENTRIES 256
+
+/*
+ * Some more useful definitions
+ */
+#define PARTN_BITS 6 /* number of minor dev bits for partitions */
+#define MAX_DRIVES 2 /* per interface; 2 assumed by lots of code */
+#define SECTOR_SIZE 512
+
+/*
+ * Timeouts for various operations:
+ */
+enum {
+ /* spec allows up to 20ms, but CF cards and SSD drives need more */
+ WAIT_DRQ = 1 * HZ, /* 1s */
+ /* some laptops are very slow */
+ WAIT_READY = 5 * HZ, /* 5s */
+ /* should be less than 3ms (?), if all ATAPI CD is closed at boot */
+ WAIT_PIDENTIFY = 10 * HZ, /* 10s */
+ /* worst case when spinning up */
+ WAIT_WORSTCASE = 30 * HZ, /* 30s */
+ /* maximum wait for an IRQ to happen */
+ WAIT_CMD = 10 * HZ, /* 10s */
+ /* Some drives require a longer IRQ timeout. */
+ WAIT_FLOPPY_CMD = 50 * HZ, /* 50s */
+ /*
+ * Some drives (for example, Seagate STT3401A Travan) require a very
+ * long timeout, because they don't return an interrupt or clear their
+ * BSY bit until after the command completes (even retension commands).
+ */
+ WAIT_TAPE_CMD = 900 * HZ, /* 900s */
+ /* minimum sleep time */
+ WAIT_MIN_SLEEP = HZ / 50, /* 20ms */
+};
+
+/*
+ * Op codes for special requests to be handled by ide_special_rq().
+ * Values should be in the range of 0x20 to 0x3f.
+ */
+#define REQ_DRIVE_RESET 0x20
+#define REQ_DEVSET_EXEC 0x21
+#define REQ_PARK_HEADS 0x22
+#define REQ_UNPARK_HEADS 0x23
+
+/*
+ * hwif_chipset_t is used to keep track of the specific hardware
+ * chipset used by each IDE interface, if known.
+ */
+enum { ide_unknown, ide_generic, ide_pci,
+ ide_cmd640, ide_dtc2278, ide_ali14xx,
+ ide_qd65xx, ide_umc8672, ide_ht6560b,
+ ide_4drives, ide_pmac, ide_acorn,
+ ide_au1xxx, ide_palm3710
+};
+
+typedef u8 hwif_chipset_t;
+
+/*
+ * Structure to hold all information about the location of this port
+ */
+struct ide_hw {
+ union {
+ struct ide_io_ports io_ports;
+ unsigned long io_ports_array[IDE_NR_PORTS];
+ };
+
+ int irq; /* our irq number */
+ struct device *dev, *parent;
+ unsigned long config;
+};
+
+static inline void ide_std_init_ports(struct ide_hw *hw,
+ unsigned long io_addr,
+ unsigned long ctl_addr)
+{
+ unsigned int i;
+
+ for (i = 0; i <= 7; i++)
+ hw->io_ports_array[i] = io_addr++;
+
+ hw->io_ports.ctl_addr = ctl_addr;
+}
+
+#define MAX_HWIFS 10
+
+/*
+ * Now for the data we need to maintain per-drive: ide_drive_t
+ */
+
+#define ide_scsi 0x21
+#define ide_disk 0x20
+#define ide_optical 0x7
+#define ide_cdrom 0x5
+#define ide_tape 0x1
+#define ide_floppy 0x0
+
+/*
+ * Special Driver Flags
+ */
+enum {
+ IDE_SFLAG_SET_GEOMETRY = (1 << 0),
+ IDE_SFLAG_RECALIBRATE = (1 << 1),
+ IDE_SFLAG_SET_MULTMODE = (1 << 2),
+};
+
+/*
+ * Status returned from various ide_ functions
+ */
+typedef enum {
+ ide_stopped, /* no drive operation was started */
+ ide_started, /* a drive operation was started, handler was set */
+} ide_startstop_t;
+
+enum {
+ IDE_VALID_ERROR = (1 << 1),
+ IDE_VALID_FEATURE = IDE_VALID_ERROR,
+ IDE_VALID_NSECT = (1 << 2),
+ IDE_VALID_LBAL = (1 << 3),
+ IDE_VALID_LBAM = (1 << 4),
+ IDE_VALID_LBAH = (1 << 5),
+ IDE_VALID_DEVICE = (1 << 6),
+ IDE_VALID_LBA = IDE_VALID_LBAL |
+ IDE_VALID_LBAM |
+ IDE_VALID_LBAH,
+ IDE_VALID_OUT_TF = IDE_VALID_FEATURE |
+ IDE_VALID_NSECT |
+ IDE_VALID_LBA,
+ IDE_VALID_IN_TF = IDE_VALID_NSECT |
+ IDE_VALID_LBA,
+ IDE_VALID_OUT_HOB = IDE_VALID_OUT_TF,
+ IDE_VALID_IN_HOB = IDE_VALID_ERROR |
+ IDE_VALID_NSECT |
+ IDE_VALID_LBA,
+};
+
+enum {
+ IDE_TFLAG_LBA48 = (1 << 0),
+ IDE_TFLAG_WRITE = (1 << 1),
+ IDE_TFLAG_CUSTOM_HANDLER = (1 << 2),
+ IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 3),
+ /* force 16-bit I/O operations */
+ IDE_TFLAG_IO_16BIT = (1 << 4),
+ /* struct ide_cmd was allocated using kmalloc() */
+ IDE_TFLAG_DYN = (1 << 5),
+ IDE_TFLAG_FS = (1 << 6),
+ IDE_TFLAG_MULTI_PIO = (1 << 7),
+ IDE_TFLAG_SET_XFER = (1 << 8),
+};
+
+enum {
+ IDE_FTFLAG_FLAGGED = (1 << 0),
+ IDE_FTFLAG_SET_IN_FLAGS = (1 << 1),
+ IDE_FTFLAG_OUT_DATA = (1 << 2),
+ IDE_FTFLAG_IN_DATA = (1 << 3),
+};
+
+struct ide_taskfile {
+ u8 data; /* 0: data byte (for TASKFILE ioctl) */
+ union { /* 1: */
+ u8 error; /* read: error */
+ u8 feature; /* write: feature */
+ };
+ u8 nsect; /* 2: number of sectors */
+ u8 lbal; /* 3: LBA low */
+ u8 lbam; /* 4: LBA mid */
+ u8 lbah; /* 5: LBA high */
+ u8 device; /* 6: device select */
+ union { /* 7: */
+ u8 status; /* read: status */
+ u8 command; /* write: command */
+ };
+};
+
+struct ide_cmd {
+ struct ide_taskfile tf;
+ struct ide_taskfile hob;
+ struct {
+ struct {
+ u8 tf;
+ u8 hob;
+ } out, in;
+ } valid;
+
+ u16 tf_flags;
+ u8 ftf_flags; /* for TASKFILE ioctl */
+ int protocol;
+
+ int sg_nents; /* number of sg entries */
+ int orig_sg_nents;
+ int sg_dma_direction; /* DMA transfer direction */
+
+ unsigned int nbytes;
+ unsigned int nleft;
+ unsigned int last_xfer_len;
+
+ struct scatterlist *cursg;
+ unsigned int cursg_ofs;
+
+ struct request *rq; /* copy of request */
+};
+
+/* ATAPI packet command flags */
+enum {
+ /* set when an error is considered normal - no retry (ide-tape) */
+ PC_FLAG_ABORT = (1 << 0),
+ PC_FLAG_SUPPRESS_ERROR = (1 << 1),
+ PC_FLAG_WAIT_FOR_DSC = (1 << 2),
+ PC_FLAG_DMA_OK = (1 << 3),
+ PC_FLAG_DMA_IN_PROGRESS = (1 << 4),
+ PC_FLAG_DMA_ERROR = (1 << 5),
+ PC_FLAG_WRITING = (1 << 6),
+};
+
+#define ATAPI_WAIT_PC (60 * HZ)
+
+struct ide_atapi_pc {
+ /* actual packet bytes */
+ u8 c[12];
+ /* incremented on each retry */
+ int retries;
+ int error;
+
+ /* bytes to transfer */
+ int req_xfer;
+
+ /* the corresponding request */
+ struct request *rq;
+
+ unsigned long flags;
+
+ /*
+ * those are more or less driver-specific and some of them are subject
+ * to change/removal later.
+ */
+ unsigned long timeout;
+};
+
+struct ide_devset;
+struct ide_driver;
+
+#ifdef CONFIG_BLK_DEV_IDEACPI
+struct ide_acpi_drive_link;
+struct ide_acpi_hwif_link;
+#endif
+
+struct ide_drive_s;
+
+struct ide_disk_ops {
+ int (*check)(struct ide_drive_s *, const char *);
+ int (*get_capacity)(struct ide_drive_s *);
+ void (*unlock_native_capacity)(struct ide_drive_s *);
+ void (*setup)(struct ide_drive_s *);
+ void (*flush)(struct ide_drive_s *);
+ int (*init_media)(struct ide_drive_s *, struct gendisk *);
+ int (*set_doorlock)(struct ide_drive_s *, struct gendisk *,
+ int);
+ ide_startstop_t (*do_request)(struct ide_drive_s *, struct request *,
+ sector_t);
+ int (*ioctl)(struct ide_drive_s *, struct block_device *,
+ fmode_t, unsigned int, unsigned long);
+};
+
+/* ATAPI device flags */
+enum {
+ IDE_AFLAG_DRQ_INTERRUPT = (1 << 0),
+
+ /* ide-cd */
+ /* Drive cannot eject the disc. */
+ IDE_AFLAG_NO_EJECT = (1 << 1),
+ /* Drive is a pre ATAPI 1.2 drive. */
+ IDE_AFLAG_PRE_ATAPI12 = (1 << 2),
+ /* TOC addresses are in BCD. */
+ IDE_AFLAG_TOCADDR_AS_BCD = (1 << 3),
+ /* TOC track numbers are in BCD. */
+ IDE_AFLAG_TOCTRACKS_AS_BCD = (1 << 4),
+ /* Saved TOC information is current. */
+ IDE_AFLAG_TOC_VALID = (1 << 6),
+ /* We think that the drive door is locked. */
+ IDE_AFLAG_DOOR_LOCKED = (1 << 7),
+ /* SET_CD_SPEED command is unsupported. */
+ IDE_AFLAG_NO_SPEED_SELECT = (1 << 8),
+ IDE_AFLAG_VERTOS_300_SSD = (1 << 9),
+ IDE_AFLAG_VERTOS_600_ESD = (1 << 10),
+ IDE_AFLAG_SANYO_3CD = (1 << 11),
+ IDE_AFLAG_FULL_CAPS_PAGE = (1 << 12),
+ IDE_AFLAG_PLAY_AUDIO_OK = (1 << 13),
+ IDE_AFLAG_LE_SPEED_FIELDS = (1 << 14),
+
+ /* ide-floppy */
+ /* Avoid commands not supported in Clik drive */
+ IDE_AFLAG_CLIK_DRIVE = (1 << 15),
+ /* Requires BH algorithm for packets */
+ IDE_AFLAG_ZIP_DRIVE = (1 << 16),
+ /* Supports format progress report */
+ IDE_AFLAG_SRFP = (1 << 17),
+
+ /* ide-tape */
+ IDE_AFLAG_IGNORE_DSC = (1 << 18),
+ /* 0 When the tape position is unknown */
+ IDE_AFLAG_ADDRESS_VALID = (1 << 19),
+ /* Device already opened */
+ IDE_AFLAG_BUSY = (1 << 20),
+ /* Attempt to auto-detect the current user block size */
+ IDE_AFLAG_DETECT_BS = (1 << 21),
+ /* Currently on a filemark */
+ IDE_AFLAG_FILEMARK = (1 << 22),
+ /* 0 = no tape is loaded, so we don't rewind after ejecting */
+ IDE_AFLAG_MEDIUM_PRESENT = (1 << 23),
+
+ IDE_AFLAG_NO_AUTOCLOSE = (1 << 24),
+};
+
+/* device flags */
+enum {
+ /* restore settings after device reset */
+ IDE_DFLAG_KEEP_SETTINGS = (1 << 0),
+ /* device is using DMA for read/write */
+ IDE_DFLAG_USING_DMA = (1 << 1),
+ /* okay to unmask other IRQs */
+ IDE_DFLAG_UNMASK = (1 << 2),
+ /* don't attempt flushes */
+ IDE_DFLAG_NOFLUSH = (1 << 3),
+ /* DSC overlap */
+ IDE_DFLAG_DSC_OVERLAP = (1 << 4),
+ /* give potential excess bandwidth */
+ IDE_DFLAG_NICE1 = (1 << 5),
+ /* device is physically present */
+ IDE_DFLAG_PRESENT = (1 << 6),
+ /* disable Host Protected Area */
+ IDE_DFLAG_NOHPA = (1 << 7),
+ /* id read from device (synthetic if not set) */
+ IDE_DFLAG_ID_READ = (1 << 8),
+ IDE_DFLAG_NOPROBE = (1 << 9),
+ /* need to do check_media_change() */
+ IDE_DFLAG_REMOVABLE = (1 << 10),
+ /* needed for removable devices */
+ IDE_DFLAG_ATTACH = (1 << 11),
+ IDE_DFLAG_FORCED_GEOM = (1 << 12),
+ /* disallow setting unmask bit */
+ IDE_DFLAG_NO_UNMASK = (1 << 13),
+ /* disallow enabling 32-bit I/O */
+ IDE_DFLAG_NO_IO_32BIT = (1 << 14),
+ /* for removable only: door lock/unlock works */
+ IDE_DFLAG_DOORLOCKING = (1 << 15),
+ /* disallow DMA */
+ IDE_DFLAG_NODMA = (1 << 16),
+ /* powermanagement told us not to do anything, so sleep nicely */
+ IDE_DFLAG_BLOCKED = (1 << 17),
+ /* sleeping & sleep field valid */
+ IDE_DFLAG_SLEEPING = (1 << 18),
+ IDE_DFLAG_POST_RESET = (1 << 19),
+ IDE_DFLAG_UDMA33_WARNED = (1 << 20),
+ IDE_DFLAG_LBA48 = (1 << 21),
+ /* status of write cache */
+ IDE_DFLAG_WCACHE = (1 << 22),
+ /* used for ignoring ATA_DF */
+ IDE_DFLAG_NOWERR = (1 << 23),
+ /* retrying in PIO */
+ IDE_DFLAG_DMA_PIO_RETRY = (1 << 24),
+ IDE_DFLAG_LBA = (1 << 25),
+ /* don't unload heads */
+ IDE_DFLAG_NO_UNLOAD = (1 << 26),
+ /* heads unloaded, please don't reset port */
+ IDE_DFLAG_PARKED = (1 << 27),
+ IDE_DFLAG_MEDIA_CHANGED = (1 << 28),
+ /* write protect */
+ IDE_DFLAG_WP = (1 << 29),
+ IDE_DFLAG_FORMAT_IN_PROGRESS = (1 << 30),
+ IDE_DFLAG_NIEN_QUIRK = (1 << 31),
+};
+
+struct ide_drive_s {
+ char name[4]; /* drive name, such as "hda" */
+ char driver_req[10]; /* requests specific driver */
+
+ struct request_queue *queue; /* request queue */
+
+ struct request *rq; /* current request */
+ void *driver_data; /* extra driver data */
+ u16 *id; /* identification info */
+#ifdef CONFIG_IDE_PROC_FS
+ struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
+ const struct ide_proc_devset *settings; /* /proc/ide/ drive settings */
+#endif
+ struct hwif_s *hwif; /* actually (ide_hwif_t *) */
+
+ const struct ide_disk_ops *disk_ops;
+
+ unsigned long dev_flags;
+
+ unsigned long sleep; /* sleep until this time */
+ unsigned long timeout; /* max time to wait for irq */
+
+ u8 special_flags; /* special action flags */
+
+ u8 select; /* basic drive/head select reg value */
+ u8 retry_pio; /* retrying dma capable host in pio */
+ u8 waiting_for_dma; /* dma currently in progress */
+ u8 dma; /* atapi dma flag */
+
+ u8 init_speed; /* transfer rate set at boot */
+ u8 current_speed; /* current transfer rate set */
+ u8 desired_speed; /* desired transfer rate set */
+ u8 pio_mode; /* for ->set_pio_mode _only_ */
+ u8 dma_mode; /* for ->set_dma_mode _only_ */
+ u8 dn; /* now wide spread use */
+ u8 acoustic; /* acoustic management */
+ u8 media; /* disk, cdrom, tape, floppy, ... */
+ u8 ready_stat; /* min status value for drive ready */
+ u8 mult_count; /* current multiple sector setting */
+ u8 mult_req; /* requested multiple sector setting */
+ u8 io_32bit; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
+ u8 bad_wstat; /* used for ignoring ATA_DF */
+ u8 head; /* "real" number of heads */
+ u8 sect; /* "real" sectors per track */
+ u8 bios_head; /* BIOS/fdisk/LILO number of heads */
+ u8 bios_sect; /* BIOS/fdisk/LILO sectors per track */
+
+ /* delay this long before sending packet command */
+ u8 pc_delay;
+
+ unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */
+ unsigned int cyl; /* "real" number of cyls */
+ void *drive_data; /* used by set_pio_mode/dev_select() */
+ unsigned int failures; /* current failure count */
+ unsigned int max_failures; /* maximum allowed failure count */
+ u64 probed_capacity;/* initial/native media capacity */
+ u64 capacity64; /* total number of sectors */
+
+ int lun; /* logical unit */
+ int crc_count; /* crc counter to reduce drive speed */
+
+ unsigned long debug_mask; /* debugging levels switch */
+
+#ifdef CONFIG_BLK_DEV_IDEACPI
+ struct ide_acpi_drive_link *acpidata;
+#endif
+ struct list_head list;
+ struct device gendev;
+ struct completion gendev_rel_comp; /* to deal with device release() */
+
+ /* current packet command */
+ struct ide_atapi_pc *pc;
+
+ /* last failed packet command */
+ struct ide_atapi_pc *failed_pc;
+
+ /* callback for packet commands */
+ int (*pc_callback)(struct ide_drive_s *, int);
+
+ ide_startstop_t (*irq_handler)(struct ide_drive_s *);
+
+ unsigned long atapi_flags;
+
+ struct ide_atapi_pc request_sense_pc;
+
+ /* current sense rq and buffer */
+ bool sense_rq_armed;
+ struct request sense_rq;
+ struct request_sense sense_data;
+};
+
+typedef struct ide_drive_s ide_drive_t;
+
+#define to_ide_device(dev) container_of(dev, ide_drive_t, gendev)
+
+#define to_ide_drv(obj, cont_type) \
+ container_of(obj, struct cont_type, dev)
+
+#define ide_drv_g(disk, cont_type) \
+ container_of((disk)->private_data, struct cont_type, driver)
+
+struct ide_port_info;
+
+struct ide_tp_ops {
+ void (*exec_command)(struct hwif_s *, u8);
+ u8 (*read_status)(struct hwif_s *);
+ u8 (*read_altstatus)(struct hwif_s *);
+ void (*write_devctl)(struct hwif_s *, u8);
+
+ void (*dev_select)(ide_drive_t *);
+ void (*tf_load)(ide_drive_t *, struct ide_taskfile *, u8);
+ void (*tf_read)(ide_drive_t *, struct ide_taskfile *, u8);
+
+ void (*input_data)(ide_drive_t *, struct ide_cmd *,
+ void *, unsigned int);
+ void (*output_data)(ide_drive_t *, struct ide_cmd *,
+ void *, unsigned int);
+};
+
+extern const struct ide_tp_ops default_tp_ops;
+
+/**
+ * struct ide_port_ops - IDE port operations
+ *
+ * @init_dev: host specific initialization of a device
+ * @set_pio_mode: routine to program host for PIO mode
+ * @set_dma_mode: routine to program host for DMA mode
+ * @reset_poll: chipset polling based on hba specifics
+ * @pre_reset: chipset specific changes to default for device-hba resets
+ * @resetproc: routine to reset controller after a disk reset
+ * @maskproc: special host masking for drive selection
+ * @quirkproc: check host's drive quirk list
+ * @clear_irq: clear IRQ
+ *
+ * @mdma_filter: filter MDMA modes
+ * @udma_filter: filter UDMA modes
+ *
+ * @cable_detect: detect cable type
+ */
+struct ide_port_ops {
+ void (*init_dev)(ide_drive_t *);
+ void (*set_pio_mode)(struct hwif_s *, ide_drive_t *);
+ void (*set_dma_mode)(struct hwif_s *, ide_drive_t *);
+ int (*reset_poll)(ide_drive_t *);
+ void (*pre_reset)(ide_drive_t *);
+ void (*resetproc)(ide_drive_t *);
+ void (*maskproc)(ide_drive_t *, int);
+ void (*quirkproc)(ide_drive_t *);
+ void (*clear_irq)(ide_drive_t *);
+ int (*test_irq)(struct hwif_s *);
+
+ u8 (*mdma_filter)(ide_drive_t *);
+ u8 (*udma_filter)(ide_drive_t *);
+
+ u8 (*cable_detect)(struct hwif_s *);
+};
+
+struct ide_dma_ops {
+ void (*dma_host_set)(struct ide_drive_s *, int);
+ int (*dma_setup)(struct ide_drive_s *, struct ide_cmd *);
+ void (*dma_start)(struct ide_drive_s *);
+ int (*dma_end)(struct ide_drive_s *);
+ int (*dma_test_irq)(struct ide_drive_s *);
+ void (*dma_lost_irq)(struct ide_drive_s *);
+ /* below ones are optional */
+ int (*dma_check)(struct ide_drive_s *, struct ide_cmd *);
+ int (*dma_timer_expiry)(struct ide_drive_s *);
+ void (*dma_clear)(struct ide_drive_s *);
+ /*
+ * The following method is optional and only required to be
+ * implemented for the SFF-8038i compatible controllers.
+ */
+ u8 (*dma_sff_read_status)(struct hwif_s *);
+};
+
+enum {
+ IDE_PFLAG_PROBING = (1 << 0),
+};
+
+struct ide_host;
+
+typedef struct hwif_s {
+ struct hwif_s *mate; /* other hwif from same PCI chip */
+ struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
+
+ struct ide_host *host;
+
+ char name[6]; /* name of interface, eg. "ide0" */
+
+ struct ide_io_ports io_ports;
+
+ unsigned long sata_scr[SATA_NR_PORTS];
+
+ ide_drive_t *devices[MAX_DRIVES + 1];
+
+ unsigned long port_flags;
+
+ u8 major; /* our major number */
+ u8 index; /* 0 for ide0; 1 for ide1; ... */
+ u8 channel; /* for dual-port chips: 0=primary, 1=secondary */
+
+ u32 host_flags;
+
+ u8 pio_mask;
+
+ u8 ultra_mask;
+ u8 mwdma_mask;
+ u8 swdma_mask;
+
+ u8 cbl; /* cable type */
+
+ hwif_chipset_t chipset; /* sub-module for tuning.. */
+
+ struct device *dev;
+
+ void (*rw_disk)(ide_drive_t *, struct request *);
+
+ const struct ide_tp_ops *tp_ops;
+ const struct ide_port_ops *port_ops;
+ const struct ide_dma_ops *dma_ops;
+
+ /* dma physical region descriptor table (cpu view) */
+ unsigned int *dmatable_cpu;
+ /* dma physical region descriptor table (dma view) */
+ dma_addr_t dmatable_dma;
+
+ /* maximum number of PRD table entries */
+ int prd_max_nents;
+ /* PRD entry size in bytes */
+ int prd_ent_size;
+
+ /* Scatter-gather list used to build the above */
+ struct scatterlist *sg_table;
+ int sg_max_nents; /* Maximum number of entries in it */
+
+ struct ide_cmd cmd; /* current command */
+
+ int rqsize; /* max sectors per request */
+ int irq; /* our irq number */
+
+ unsigned long dma_base; /* base addr for dma ports */
+
+ unsigned long config_data; /* for use by chipset-specific code */
+ unsigned long select_data; /* for use by chipset-specific code */
+
+ unsigned long extra_base; /* extra addr for dma ports */
+ unsigned extra_ports; /* number of extra dma ports */
+
+ unsigned present : 1; /* this interface exists */
+ unsigned busy : 1; /* serializes devices on a port */
+
+ struct device gendev;
+ struct device *portdev;
+
+ struct completion gendev_rel_comp; /* To deal with device release() */
+
+ void *hwif_data; /* extra hwif data */
+
+#ifdef CONFIG_BLK_DEV_IDEACPI
+ struct ide_acpi_hwif_link *acpidata;
+#endif
+
+ /* IRQ handler, if active */
+ ide_startstop_t (*handler)(ide_drive_t *);
+
+ /* BOOL: polling active & poll_timeout field valid */
+ unsigned int polling : 1;
+
+ /* current drive */
+ ide_drive_t *cur_dev;
+
+ /* current request */
+ struct request *rq;
+
+ /* failsafe timer */
+ struct timer_list timer;
+ /* timeout value during long polls */
+ unsigned long poll_timeout;
+ /* queried upon timeouts */
+ int (*expiry)(ide_drive_t *);
+
+ int req_gen;
+ int req_gen_timer;
+
+ spinlock_t lock;
+} ____cacheline_internodealigned_in_smp ide_hwif_t;
+
+#define MAX_HOST_PORTS 4
+
+struct ide_host {
+ ide_hwif_t *ports[MAX_HOST_PORTS + 1];
+ unsigned int n_ports;
+ struct device *dev[2];
+
+ int (*init_chipset)(struct pci_dev *);
+
+ void (*get_lock)(irq_handler_t, void *);
+ void (*release_lock)(void);
+
+ irq_handler_t irq_handler;
+
+ unsigned long host_flags;
+
+ int irq_flags;
+
+ void *host_priv;
+ ide_hwif_t *cur_port; /* for hosts requiring serialization */
+
+ /* used for hosts requiring serialization */
+ volatile unsigned long host_busy;
+};
+
+#define IDE_HOST_BUSY 0
+
+/*
+ * internal ide interrupt handler type
+ */
+typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
+typedef int (ide_expiry_t)(ide_drive_t *);
+
+/* used by ide-cd, ide-floppy, etc. */
+typedef void (xfer_func_t)(ide_drive_t *, struct ide_cmd *, void *, unsigned);
+
+extern struct mutex ide_setting_mtx;
+
+/*
+ * configurable drive settings
+ */
+
+#define DS_SYNC (1 << 0)
+
+struct ide_devset {
+ int (*get)(ide_drive_t *);
+ int (*set)(ide_drive_t *, int);
+ unsigned int flags;
+};
+
+#define __DEVSET(_flags, _get, _set) { \
+ .flags = _flags, \
+ .get = _get, \
+ .set = _set, \
+}
+
+#define ide_devset_get(name, field) \
+static int get_##name(ide_drive_t *drive) \
+{ \
+ return drive->field; \
+}
+
+#define ide_devset_set(name, field) \
+static int set_##name(ide_drive_t *drive, int arg) \
+{ \
+ drive->field = arg; \
+ return 0; \
+}
+
+#define ide_devset_get_flag(name, flag) \
+static int get_##name(ide_drive_t *drive) \
+{ \
+ return !!(drive->dev_flags & flag); \
+}
+
+#define ide_devset_set_flag(name, flag) \
+static int set_##name(ide_drive_t *drive, int arg) \
+{ \
+ if (arg) \
+ drive->dev_flags |= flag; \
+ else \
+ drive->dev_flags &= ~flag; \
+ return 0; \
+}
+
+#define __IDE_DEVSET(_name, _flags, _get, _set) \
+const struct ide_devset ide_devset_##_name = \
+ __DEVSET(_flags, _get, _set)
+
+#define IDE_DEVSET(_name, _flags, _get, _set) \
+static __IDE_DEVSET(_name, _flags, _get, _set)
+
+#define ide_devset_rw(_name, _func) \
+IDE_DEVSET(_name, 0, get_##_func, set_##_func)
+
+#define ide_devset_w(_name, _func) \
+IDE_DEVSET(_name, 0, NULL, set_##_func)
+
+#define ide_ext_devset_rw(_name, _func) \
+__IDE_DEVSET(_name, 0, get_##_func, set_##_func)
+
+#define ide_ext_devset_rw_sync(_name, _func) \
+__IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func)
+
+#define ide_decl_devset(_name) \
+extern const struct ide_devset ide_devset_##_name
+
+ide_decl_devset(io_32bit);
+ide_decl_devset(keepsettings);
+ide_decl_devset(pio_mode);
+ide_decl_devset(unmaskirq);
+ide_decl_devset(using_dma);
+
+#ifdef CONFIG_IDE_PROC_FS
+/*
+ * /proc/ide interface
+ */
+
+#define ide_devset_rw_field(_name, _field) \
+ide_devset_get(_name, _field); \
+ide_devset_set(_name, _field); \
+IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
+
+#define ide_devset_rw_flag(_name, _field) \
+ide_devset_get_flag(_name, _field); \
+ide_devset_set_flag(_name, _field); \
+IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
+
+struct ide_proc_devset {
+ const char *name;
+ const struct ide_devset *setting;
+ int min, max;
+ int (*mulf)(ide_drive_t *);
+ int (*divf)(ide_drive_t *);
+};
+
+#define __IDE_PROC_DEVSET(_name, _min, _max, _mulf, _divf) { \
+ .name = __stringify(_name), \
+ .setting = &ide_devset_##_name, \
+ .min = _min, \
+ .max = _max, \
+ .mulf = _mulf, \
+ .divf = _divf, \
+}
+
+#define IDE_PROC_DEVSET(_name, _min, _max) \
+__IDE_PROC_DEVSET(_name, _min, _max, NULL, NULL)
+
+typedef struct {
+ const char *name;
+ umode_t mode;
+ const struct file_operations *proc_fops;
+} ide_proc_entry_t;
+
+void proc_ide_create(void);
+void proc_ide_destroy(void);
+void ide_proc_register_port(ide_hwif_t *);
+void ide_proc_port_register_devices(ide_hwif_t *);
+void ide_proc_unregister_device(ide_drive_t *);
+void ide_proc_unregister_port(ide_hwif_t *);
+void ide_proc_register_driver(ide_drive_t *, struct ide_driver *);
+void ide_proc_unregister_driver(ide_drive_t *, struct ide_driver *);
+
+extern const struct file_operations ide_capacity_proc_fops;
+extern const struct file_operations ide_geometry_proc_fops;
+#else
+static inline void proc_ide_create(void) { ; }
+static inline void proc_ide_destroy(void) { ; }
+static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; }
+static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; }
+static inline void ide_proc_unregister_device(ide_drive_t *drive) { ; }
+static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; }
+static inline void ide_proc_register_driver(ide_drive_t *drive,
+ struct ide_driver *driver) { ; }
+static inline void ide_proc_unregister_driver(ide_drive_t *drive,
+ struct ide_driver *driver) { ; }
+#endif
+
+enum {
+ /* enter/exit functions */
+ IDE_DBG_FUNC = (1 << 0),
+ /* sense key/asc handling */
+ IDE_DBG_SENSE = (1 << 1),
+ /* packet commands handling */
+ IDE_DBG_PC = (1 << 2),
+ /* request handling */
+ IDE_DBG_RQ = (1 << 3),
+ /* driver probing/setup */
+ IDE_DBG_PROBE = (1 << 4),
+};
+
+/* DRV_NAME has to be defined in the driver before using the macro below */
+#define __ide_debug_log(lvl, fmt, args...) \
+{ \
+ if (unlikely(drive->debug_mask & lvl)) \
+ printk(KERN_INFO DRV_NAME ": %s: " fmt "\n", \
+ __func__, ## args); \
+}
+
+/*
+ * Power Management state machine (rq->pm->pm_step).
+ *
+ * For each step, the core calls ide_start_power_step() first.
+ * This can return:
+ * - ide_stopped : In this case, the core calls us back again unless
+ * step have been set to ide_power_state_completed.
+ * - ide_started : In this case, the channel is left busy until an
+ * async event (interrupt) occurs.
+ * Typically, ide_start_power_step() will issue a taskfile request with
+ * do_rw_taskfile().
+ *
+ * Upon reception of the interrupt, the core will call ide_complete_power_step()
+ * with the error code if any. This routine should update the step value
+ * and return. It should not start a new request. The core will call
+ * ide_start_power_step() for the new step value, unless step have been
+ * set to IDE_PM_COMPLETED.
+ */
+enum {
+ IDE_PM_START_SUSPEND,
+ IDE_PM_FLUSH_CACHE = IDE_PM_START_SUSPEND,
+ IDE_PM_STANDBY,
+
+ IDE_PM_START_RESUME,
+ IDE_PM_RESTORE_PIO = IDE_PM_START_RESUME,
+ IDE_PM_IDLE,
+ IDE_PM_RESTORE_DMA,
+
+ IDE_PM_COMPLETED,
+};
+
+int generic_ide_suspend(struct device *, pm_message_t);
+int generic_ide_resume(struct device *);
+
+void ide_complete_power_step(ide_drive_t *, struct request *);
+ide_startstop_t ide_start_power_step(ide_drive_t *, struct request *);
+void ide_complete_pm_rq(ide_drive_t *, struct request *);
+void ide_check_pm_state(ide_drive_t *, struct request *);
+
+/*
+ * Subdrivers support.
+ *
+ * The gendriver.owner field should be set to the module owner of this driver.
+ * The gendriver.name field should be set to the name of this driver
+ */
+struct ide_driver {
+ const char *version;
+ ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
+ struct device_driver gen_driver;
+ int (*probe)(ide_drive_t *);
+ void (*remove)(ide_drive_t *);
+ void (*resume)(ide_drive_t *);
+ void (*shutdown)(ide_drive_t *);
+#ifdef CONFIG_IDE_PROC_FS
+ ide_proc_entry_t * (*proc_entries)(ide_drive_t *);
+ const struct ide_proc_devset * (*proc_devsets)(ide_drive_t *);
+#endif
+};
+
+#define to_ide_driver(drv) container_of(drv, struct ide_driver, gen_driver)
+
+int ide_device_get(ide_drive_t *);
+void ide_device_put(ide_drive_t *);
+
+struct ide_ioctl_devset {
+ unsigned int get_ioctl;
+ unsigned int set_ioctl;
+ const struct ide_devset *setting;
+};
+
+int ide_setting_ioctl(ide_drive_t *, struct block_device *, unsigned int,
+ unsigned long, const struct ide_ioctl_devset *);
+
+int generic_ide_ioctl(ide_drive_t *, struct block_device *, unsigned, unsigned long);
+
+extern int ide_vlb_clk;
+extern int ide_pci_clk;
+
+int ide_end_rq(ide_drive_t *, struct request *, int, unsigned int);
+void ide_kill_rq(ide_drive_t *, struct request *);
+
+void __ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int);
+void ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int);
+
+void ide_execute_command(ide_drive_t *, struct ide_cmd *, ide_handler_t *,
+ unsigned int);
+
+void ide_pad_transfer(ide_drive_t *, int, int);
+
+ide_startstop_t ide_error(ide_drive_t *, const char *, u8);
+
+void ide_fix_driveid(u16 *);
+
+extern void ide_fixstring(u8 *, const int, const int);
+
+int ide_busy_sleep(ide_drive_t *, unsigned long, int);
+
+int __ide_wait_stat(ide_drive_t *, u8, u8, unsigned long, u8 *);
+int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
+
+ide_startstop_t ide_do_park_unpark(ide_drive_t *, struct request *);
+ide_startstop_t ide_do_devset(ide_drive_t *, struct request *);
+
+extern ide_startstop_t ide_do_reset (ide_drive_t *);
+
+extern int ide_devset_execute(ide_drive_t *drive,
+ const struct ide_devset *setting, int arg);
+
+void ide_complete_cmd(ide_drive_t *, struct ide_cmd *, u8, u8);
+int ide_complete_rq(ide_drive_t *, int, unsigned int);
+
+void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd);
+void ide_tf_dump(const char *, struct ide_cmd *);
+
+void ide_exec_command(ide_hwif_t *, u8);
+u8 ide_read_status(ide_hwif_t *);
+u8 ide_read_altstatus(ide_hwif_t *);
+void ide_write_devctl(ide_hwif_t *, u8);
+
+void ide_dev_select(ide_drive_t *);
+void ide_tf_load(ide_drive_t *, struct ide_taskfile *, u8);
+void ide_tf_read(ide_drive_t *, struct ide_taskfile *, u8);
+
+void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
+void ide_output_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int);
+
+void SELECT_MASK(ide_drive_t *, int);
+
+u8 ide_read_error(ide_drive_t *);
+void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *);
+
+int ide_check_ireason(ide_drive_t *, struct request *, int, int, int);
+
+int ide_check_atapi_device(ide_drive_t *, const char *);
+
+void ide_init_pc(struct ide_atapi_pc *);
+
+/* Disk head parking */
+extern wait_queue_head_t ide_park_wq;
+ssize_t ide_park_show(struct device *dev, struct device_attribute *attr,
+ char *buf);
+ssize_t ide_park_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t len);
+
+/*
+ * Special requests for ide-tape block device strategy routine.
+ *
+ * In order to service a character device command, we add special requests to
+ * the tail of our block device request queue and wait for their completion.
+ */
+enum {
+ REQ_IDETAPE_PC1 = (1 << 0), /* packet command (first stage) */
+ REQ_IDETAPE_PC2 = (1 << 1), /* packet command (second stage) */
+ REQ_IDETAPE_READ = (1 << 2),
+ REQ_IDETAPE_WRITE = (1 << 3),
+};
+
+int ide_queue_pc_tail(ide_drive_t *, struct gendisk *, struct ide_atapi_pc *,
+ void *, unsigned int);
+
+int ide_do_test_unit_ready(ide_drive_t *, struct gendisk *);
+int ide_do_start_stop(ide_drive_t *, struct gendisk *, int);
+int ide_set_media_lock(ide_drive_t *, struct gendisk *, int);
+void ide_create_request_sense_cmd(ide_drive_t *, struct ide_atapi_pc *);
+void ide_retry_pc(ide_drive_t *drive);
+
+void ide_prep_sense(ide_drive_t *drive, struct request *rq);
+int ide_queue_sense_rq(ide_drive_t *drive, void *special);
+
+int ide_cd_expiry(ide_drive_t *);
+
+int ide_cd_get_xferlen(struct request *);
+
+ide_startstop_t ide_issue_pc(ide_drive_t *, struct ide_cmd *);
+
+ide_startstop_t do_rw_taskfile(ide_drive_t *, struct ide_cmd *);
+
+void ide_pio_bytes(ide_drive_t *, struct ide_cmd *, unsigned int, unsigned int);
+
+void ide_finish_cmd(ide_drive_t *, struct ide_cmd *, u8);
+
+int ide_raw_taskfile(ide_drive_t *, struct ide_cmd *, u8 *, u16);
+int ide_no_data_taskfile(ide_drive_t *, struct ide_cmd *);
+
+int ide_taskfile_ioctl(ide_drive_t *, unsigned long);
+
+int ide_dev_read_id(ide_drive_t *, u8, u16 *, int);
+
+extern int ide_driveid_update(ide_drive_t *);
+extern int ide_config_drive_speed(ide_drive_t *, u8);
+extern u8 eighty_ninty_three (ide_drive_t *);
+extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *);
+
+extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
+
+extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);
+
+extern void ide_timer_expiry(unsigned long);
+extern irqreturn_t ide_intr(int irq, void *dev_id);
+extern void do_ide_request(struct request_queue *);
+extern void ide_requeue_and_plug(ide_drive_t *drive, struct request *rq);
+
+void ide_init_disk(struct gendisk *, ide_drive_t *);
+
+#ifdef CONFIG_IDEPCI_PCIBUS_ORDER
+extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
+#define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
+#else
+#define ide_pci_register_driver(d) pci_register_driver(d)
+#endif
+
+static inline int ide_pci_is_in_compatibility_mode(struct pci_dev *dev)
+{
+ if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && (dev->class & 5) != 5)
+ return 1;
+ return 0;
+}
+
+void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *,
+ struct ide_hw *, struct ide_hw **);
+void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
+
+#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
+int ide_pci_set_master(struct pci_dev *, const char *);
+unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
+int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
+int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
+#else
+static inline int ide_hwif_setup_dma(ide_hwif_t *hwif,
+ const struct ide_port_info *d)
+{
+ return -EINVAL;
+}
+#endif
+
+struct ide_pci_enablebit {
+ u8 reg; /* byte pci reg holding the enable-bit */
+ u8 mask; /* mask to isolate the enable-bit */
+ u8 val; /* value of masked reg when "enabled" */
+};
+
+enum {
+ /* Uses ISA control ports not PCI ones. */
+ IDE_HFLAG_ISA_PORTS = (1 << 0),
+ /* single port device */
+ IDE_HFLAG_SINGLE = (1 << 1),
+ /* don't use legacy PIO blacklist */
+ IDE_HFLAG_PIO_NO_BLACKLIST = (1 << 2),
+ /* set for the second port of QD65xx */
+ IDE_HFLAG_QD_2ND_PORT = (1 << 3),
+ /* use PIO8/9 for prefetch off/on */
+ IDE_HFLAG_ABUSE_PREFETCH = (1 << 4),
+ /* use PIO6/7 for fast-devsel off/on */
+ IDE_HFLAG_ABUSE_FAST_DEVSEL = (1 << 5),
+ /* use 100-102 and 200-202 PIO values to set DMA modes */
+ IDE_HFLAG_ABUSE_DMA_MODES = (1 << 6),
+ /*
+ * keep DMA setting when programming PIO mode, may be used only
+ * for hosts which have separate PIO and DMA timings (ie. PMAC)
+ */
+ IDE_HFLAG_SET_PIO_MODE_KEEP_DMA = (1 << 7),
+ /* program host for the transfer mode after programming device */
+ IDE_HFLAG_POST_SET_MODE = (1 << 8),
+ /* don't program host/device for the transfer mode ("smart" hosts) */
+ IDE_HFLAG_NO_SET_MODE = (1 << 9),
+ /* trust BIOS for programming chipset/device for DMA */
+ IDE_HFLAG_TRUST_BIOS_FOR_DMA = (1 << 10),
+ /* host is CS5510/CS5520 */
+ IDE_HFLAG_CS5520 = (1 << 11),
+ /* ATAPI DMA is unsupported */
+ IDE_HFLAG_NO_ATAPI_DMA = (1 << 12),
+ /* set if host is a "non-bootable" controller */
+ IDE_HFLAG_NON_BOOTABLE = (1 << 13),
+ /* host doesn't support DMA */
+ IDE_HFLAG_NO_DMA = (1 << 14),
+ /* check if host is PCI IDE device before allowing DMA */
+ IDE_HFLAG_NO_AUTODMA = (1 << 15),
+ /* host uses MMIO */
+ IDE_HFLAG_MMIO = (1 << 16),
+ /* no LBA48 */
+ IDE_HFLAG_NO_LBA48 = (1 << 17),
+ /* no LBA48 DMA */
+ IDE_HFLAG_NO_LBA48_DMA = (1 << 18),
+ /* data FIFO is cleared by an error */
+ IDE_HFLAG_ERROR_STOPS_FIFO = (1 << 19),
+ /* serialize ports */
+ IDE_HFLAG_SERIALIZE = (1 << 20),
+ /* host is DTC2278 */
+ IDE_HFLAG_DTC2278 = (1 << 21),
+ /* 4 devices on a single set of I/O ports */
+ IDE_HFLAG_4DRIVES = (1 << 22),
+ /* host is TRM290 */
+ IDE_HFLAG_TRM290 = (1 << 23),
+ /* use 32-bit I/O ops */
+ IDE_HFLAG_IO_32BIT = (1 << 24),
+ /* unmask IRQs */
+ IDE_HFLAG_UNMASK_IRQS = (1 << 25),
+ IDE_HFLAG_BROKEN_ALTSTATUS = (1 << 26),
+ /* serialize ports if DMA is possible (for sl82c105) */
+ IDE_HFLAG_SERIALIZE_DMA = (1 << 27),
+ /* force host out of "simplex" mode */
+ IDE_HFLAG_CLEAR_SIMPLEX = (1 << 28),
+ /* DSC overlap is unsupported */
+ IDE_HFLAG_NO_DSC = (1 << 29),
+ /* never use 32-bit I/O ops */
+ IDE_HFLAG_NO_IO_32BIT = (1 << 30),
+ /* never unmask IRQs */
+ IDE_HFLAG_NO_UNMASK_IRQS = (1 << 31),
+};
+
+#ifdef CONFIG_BLK_DEV_OFFBOARD
+# define IDE_HFLAG_OFF_BOARD 0
+#else
+# define IDE_HFLAG_OFF_BOARD IDE_HFLAG_NON_BOOTABLE
+#endif
+
+struct ide_port_info {
+ char *name;
+
+ int (*init_chipset)(struct pci_dev *);
+
+ void (*get_lock)(irq_handler_t, void *);
+ void (*release_lock)(void);
+
+ void (*init_iops)(ide_hwif_t *);
+ void (*init_hwif)(ide_hwif_t *);
+ int (*init_dma)(ide_hwif_t *,
+ const struct ide_port_info *);
+
+ const struct ide_tp_ops *tp_ops;
+ const struct ide_port_ops *port_ops;
+ const struct ide_dma_ops *dma_ops;
+
+ struct ide_pci_enablebit enablebits[2];
+
+ hwif_chipset_t chipset;
+
+ u16 max_sectors; /* if < than the default one */
+
+ u32 host_flags;
+
+ int irq_flags;
+
+ u8 pio_mask;
+ u8 swdma_mask;
+ u8 mwdma_mask;
+ u8 udma_mask;
+};
+
+int ide_pci_init_one(struct pci_dev *, const struct ide_port_info *, void *);
+int ide_pci_init_two(struct pci_dev *, struct pci_dev *,
+ const struct ide_port_info *, void *);
+void ide_pci_remove(struct pci_dev *);
+
+#ifdef CONFIG_PM
+int ide_pci_suspend(struct pci_dev *, pm_message_t);
+int ide_pci_resume(struct pci_dev *);
+#else
+#define ide_pci_suspend NULL
+#define ide_pci_resume NULL
+#endif
+
+void ide_map_sg(ide_drive_t *, struct ide_cmd *);
+void ide_init_sg_cmd(struct ide_cmd *, unsigned int);
+
+#define BAD_DMA_DRIVE 0
+#define GOOD_DMA_DRIVE 1
+
+struct drive_list_entry {
+ const char *id_model;
+ const char *id_firmware;
+};
+
+int ide_in_drive_list(u16 *, const struct drive_list_entry *);
+
+#ifdef CONFIG_BLK_DEV_IDEDMA
+int ide_dma_good_drive(ide_drive_t *);
+int __ide_dma_bad_drive(ide_drive_t *);
+
+u8 ide_find_dma_mode(ide_drive_t *, u8);
+
+static inline u8 ide_max_dma_mode(ide_drive_t *drive)
+{
+ return ide_find_dma_mode(drive, XFER_UDMA_6);
+}
+
+void ide_dma_off_quietly(ide_drive_t *);
+void ide_dma_off(ide_drive_t *);
+void ide_dma_on(ide_drive_t *);
+int ide_set_dma(ide_drive_t *);
+void ide_check_dma_crc(ide_drive_t *);
+ide_startstop_t ide_dma_intr(ide_drive_t *);
+
+int ide_allocate_dma_engine(ide_hwif_t *);
+void ide_release_dma_engine(ide_hwif_t *);
+
+int ide_dma_prepare(ide_drive_t *, struct ide_cmd *);
+void ide_dma_unmap_sg(ide_drive_t *, struct ide_cmd *);
+
+#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
+int config_drive_for_dma(ide_drive_t *);
+int ide_build_dmatable(ide_drive_t *, struct ide_cmd *);
+void ide_dma_host_set(ide_drive_t *, int);
+int ide_dma_setup(ide_drive_t *, struct ide_cmd *);
+extern void ide_dma_start(ide_drive_t *);
+int ide_dma_end(ide_drive_t *);
+int ide_dma_test_irq(ide_drive_t *);
+int ide_dma_sff_timer_expiry(ide_drive_t *);
+u8 ide_dma_sff_read_status(ide_hwif_t *);
+extern const struct ide_dma_ops sff_dma_ops;
+#else
+static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; }
+#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
+
+void ide_dma_lost_irq(ide_drive_t *);
+ide_startstop_t ide_dma_timeout_retry(ide_drive_t *, int);
+
+#else
+static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; }
+static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; }
+static inline void ide_dma_off_quietly(ide_drive_t *drive) { ; }
+static inline void ide_dma_off(ide_drive_t *drive) { ; }
+static inline void ide_dma_on(ide_drive_t *drive) { ; }
+static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
+static inline int ide_set_dma(ide_drive_t *drive) { return 1; }
+static inline void ide_check_dma_crc(ide_drive_t *drive) { ; }
+static inline ide_startstop_t ide_dma_intr(ide_drive_t *drive) { return ide_stopped; }
+static inline ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) { return ide_stopped; }
+static inline void ide_release_dma_engine(ide_hwif_t *hwif) { ; }
+static inline int ide_dma_prepare(ide_drive_t *drive,
+ struct ide_cmd *cmd) { return 1; }
+static inline void ide_dma_unmap_sg(ide_drive_t *drive,
+ struct ide_cmd *cmd) { ; }
+#endif /* CONFIG_BLK_DEV_IDEDMA */
+
+#ifdef CONFIG_BLK_DEV_IDEACPI
+int ide_acpi_init(void);
+bool ide_port_acpi(ide_hwif_t *hwif);
+extern int ide_acpi_exec_tfs(ide_drive_t *drive);
+extern void ide_acpi_get_timing(ide_hwif_t *hwif);
+extern void ide_acpi_push_timing(ide_hwif_t *hwif);
+void ide_acpi_init_port(ide_hwif_t *);
+void ide_acpi_port_init_devices(ide_hwif_t *);
+extern void ide_acpi_set_state(ide_hwif_t *hwif, int on);
+#else
+static inline int ide_acpi_init(void) { return 0; }
+static inline bool ide_port_acpi(ide_hwif_t *hwif) { return 0; }
+static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
+static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
+static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
+static inline void ide_acpi_init_port(ide_hwif_t *hwif) { ; }
+static inline void ide_acpi_port_init_devices(ide_hwif_t *hwif) { ; }
+static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {}
+#endif
+
+void ide_register_region(struct gendisk *);
+void ide_unregister_region(struct gendisk *);
+
+void ide_check_nien_quirk_list(ide_drive_t *);
+void ide_undecoded_slave(ide_drive_t *);
+
+void ide_port_apply_params(ide_hwif_t *);
+int ide_sysfs_register_port(ide_hwif_t *);
+
+struct ide_host *ide_host_alloc(const struct ide_port_info *, struct ide_hw **,
+ unsigned int);
+void ide_host_free(struct ide_host *);
+int ide_host_register(struct ide_host *, const struct ide_port_info *,
+ struct ide_hw **);
+int ide_host_add(const struct ide_port_info *, struct ide_hw **, unsigned int,
+ struct ide_host **);
+void ide_host_remove(struct ide_host *);
+int ide_legacy_device_add(const struct ide_port_info *, unsigned long);
+void ide_port_unregister_devices(ide_hwif_t *);
+void ide_port_scan(ide_hwif_t *);
+
+static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
+{
+ return hwif->hwif_data;
+}
+
+static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
+{
+ hwif->hwif_data = data;
+}
+
+extern void ide_toggle_bounce(ide_drive_t *drive, int on);
+
+u64 ide_get_lba_addr(struct ide_cmd *, int);
+u8 ide_dump_status(ide_drive_t *, const char *, u8);
+
+struct ide_timing {
+ u8 mode;
+ u8 setup; /* t1 */
+ u16 act8b; /* t2 for 8-bit io */
+ u16 rec8b; /* t2i for 8-bit io */
+ u16 cyc8b; /* t0 for 8-bit io */
+ u16 active; /* t2 or tD */
+ u16 recover; /* t2i or tK */
+ u16 cycle; /* t0 */
+ u16 udma; /* t2CYCTYP/2 */
+};
+
+enum {
+ IDE_TIMING_SETUP = (1 << 0),
+ IDE_TIMING_ACT8B = (1 << 1),
+ IDE_TIMING_REC8B = (1 << 2),
+ IDE_TIMING_CYC8B = (1 << 3),
+ IDE_TIMING_8BIT = IDE_TIMING_ACT8B | IDE_TIMING_REC8B |
+ IDE_TIMING_CYC8B,
+ IDE_TIMING_ACTIVE = (1 << 4),
+ IDE_TIMING_RECOVER = (1 << 5),
+ IDE_TIMING_CYCLE = (1 << 6),
+ IDE_TIMING_UDMA = (1 << 7),
+ IDE_TIMING_ALL = IDE_TIMING_SETUP | IDE_TIMING_8BIT |
+ IDE_TIMING_ACTIVE | IDE_TIMING_RECOVER |
+ IDE_TIMING_CYCLE | IDE_TIMING_UDMA,
+};
+
+struct ide_timing *ide_timing_find_mode(u8);
+u16 ide_pio_cycle_time(ide_drive_t *, u8);
+void ide_timing_merge(struct ide_timing *, struct ide_timing *,
+ struct ide_timing *, unsigned int);
+int ide_timing_compute(ide_drive_t *, u8, struct ide_timing *, int, int);
+
+#ifdef CONFIG_IDE_XFER_MODE
+int ide_scan_pio_blacklist(char *);
+const char *ide_xfer_verbose(u8);
+int ide_pio_need_iordy(ide_drive_t *, const u8);
+int ide_set_pio_mode(ide_drive_t *, u8);
+int ide_set_dma_mode(ide_drive_t *, u8);
+void ide_set_pio(ide_drive_t *, u8);
+int ide_set_xfer_rate(ide_drive_t *, u8);
+#else
+static inline void ide_set_pio(ide_drive_t *drive, u8 pio) { ; }
+static inline int ide_set_xfer_rate(ide_drive_t *drive, u8 rate) { return -1; }
+#endif
+
+static inline void ide_set_max_pio(ide_drive_t *drive)
+{
+ ide_set_pio(drive, 255);
+}
+
+char *ide_media_string(ide_drive_t *);
+
+extern const struct attribute_group *ide_dev_groups[];
+extern struct bus_type ide_bus_type;
+extern struct class *ide_port_class;
+
+static inline void ide_dump_identify(u8 *id)
+{
+ print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 2, id, 512, 0);
+}
+
+static inline int hwif_to_node(ide_hwif_t *hwif)
+{
+ return hwif->dev ? dev_to_node(hwif->dev) : -1;
+}
+
+static inline ide_drive_t *ide_get_pair_dev(ide_drive_t *drive)
+{
+ ide_drive_t *peer = drive->hwif->devices[(drive->dn ^ 1) & 1];
+
+ return (peer->dev_flags & IDE_DFLAG_PRESENT) ? peer : NULL;
+}
+
+static inline void *ide_get_drivedata(ide_drive_t *drive)
+{
+ return drive->drive_data;
+}
+
+static inline void ide_set_drivedata(ide_drive_t *drive, void *data)
+{
+ drive->drive_data = data;
+}
+
+#define ide_port_for_each_dev(i, dev, port) \
+ for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++)
+
+#define ide_port_for_each_present_dev(i, dev, port) \
+ for ((i) = 0; ((dev) = (port)->devices[i]) || (i) < MAX_DRIVES; (i)++) \
+ if ((dev)->dev_flags & IDE_DFLAG_PRESENT)
+
+#define ide_host_for_each_port(i, port, host) \
+ for ((i) = 0; ((port) = (host)->ports[i]) || (i) < MAX_HOST_PORTS; (i)++)
+
+#endif /* _IDE_H */