diff options
Diffstat (limited to 'kernel/include/linux/clk/ti.h')
| -rw-r--r-- | kernel/include/linux/clk/ti.h | 376 |
1 files changed, 376 insertions, 0 deletions
diff --git a/kernel/include/linux/clk/ti.h b/kernel/include/linux/clk/ti.h new file mode 100644 index 000000000..79b76e13d --- /dev/null +++ b/kernel/include/linux/clk/ti.h @@ -0,0 +1,376 @@ +/* + * TI clock drivers support + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __LINUX_CLK_TI_H__ +#define __LINUX_CLK_TI_H__ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> + +/** + * struct dpll_data - DPLL registers and integration data + * @mult_div1_reg: register containing the DPLL M and N bitfields + * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg + * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg + * @clk_bypass: struct clk pointer to the clock's bypass clock input + * @clk_ref: struct clk pointer to the clock's reference clock input + * @control_reg: register containing the DPLL mode bitfield + * @enable_mask: mask of the DPLL mode bitfield in @control_reg + * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() + * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() + * @last_rounded_m4xen: cache of the last M4X result of + * omap4_dpll_regm4xen_round_rate() + * @last_rounded_lpmode: cache of the last lpmode result of + * omap4_dpll_lpmode_recalc() + * @max_multiplier: maximum valid non-bypass multiplier value (actual) + * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() + * @min_divider: minimum valid non-bypass divider value (actual) + * @max_divider: maximum valid non-bypass divider value (actual) + * @modes: possible values of @enable_mask + * @autoidle_reg: register containing the DPLL autoidle mode bitfield + * @idlest_reg: register containing the DPLL idle status bitfield + * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg + * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg + * @dcc_mask: mask of the DPLL DCC correction bitfield @mult_div1_reg + * @dcc_rate: rate atleast which DCC @dcc_mask must be set + * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg + * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg + * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg + * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg + * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs + * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs + * @flags: DPLL type/features (see below) + * + * Possible values for @flags: + * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) + * + * @freqsel_mask is only used on the OMAP34xx family and AM35xx. + * + * XXX Some DPLLs have multiple bypass inputs, so it's not technically + * correct to only have one @clk_bypass pointer. + * + * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, + * @last_rounded_n) should be separated from the runtime-fixed fields + * and placed into a different structure, so that the runtime-fixed data + * can be placed into read-only space. + */ +struct dpll_data { + void __iomem *mult_div1_reg; + u32 mult_mask; + u32 div1_mask; + struct clk *clk_bypass; + struct clk *clk_ref; + void __iomem *control_reg; + u32 enable_mask; + unsigned long last_rounded_rate; + u16 last_rounded_m; + u8 last_rounded_m4xen; + u8 last_rounded_lpmode; + u16 max_multiplier; + u8 last_rounded_n; + u8 min_divider; + u16 max_divider; + u8 modes; + void __iomem *autoidle_reg; + void __iomem *idlest_reg; + u32 autoidle_mask; + u32 freqsel_mask; + u32 idlest_mask; + u32 dco_mask; + u32 sddiv_mask; + u32 dcc_mask; + unsigned long dcc_rate; + u32 lpmode_mask; + u32 m4xen_mask; + u8 auto_recal_bit; + u8 recal_en_bit; + u8 recal_st_bit; + u8 flags; +}; + +struct clk_hw_omap; + +/** + * struct clk_hw_omap_ops - OMAP clk ops + * @find_idlest: find idlest register information for a clock + * @find_companion: find companion clock register information for a clock, + * basically converts CM_ICLKEN* <-> CM_FCLKEN* + * @allow_idle: enables autoidle hardware functionality for a clock + * @deny_idle: prevent autoidle hardware functionality for a clock + */ +struct clk_hw_omap_ops { + void (*find_idlest)(struct clk_hw_omap *oclk, + void __iomem **idlest_reg, + u8 *idlest_bit, u8 *idlest_val); + void (*find_companion)(struct clk_hw_omap *oclk, + void __iomem **other_reg, + u8 *other_bit); + void (*allow_idle)(struct clk_hw_omap *oclk); + void (*deny_idle)(struct clk_hw_omap *oclk); +}; + +/** + * struct clk_hw_omap - OMAP struct clk + * @node: list_head connecting this clock into the full clock list + * @enable_reg: register to write to enable the clock (see @enable_bit) + * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) + * @flags: see "struct clk.flags possibilities" above + * @clksel_reg: for clksel clks, register va containing src/divisor select + * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector + * @clksel: for clksel clks, pointer to struct clksel for this clock + * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock + * @clkdm_name: clockdomain name that this clock is contained in + * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime + * @ops: clock ops for this clock + */ +struct clk_hw_omap { + struct clk_hw hw; + struct list_head node; + unsigned long fixed_rate; + u8 fixed_div; + void __iomem *enable_reg; + u8 enable_bit; + u8 flags; + void __iomem *clksel_reg; + u32 clksel_mask; + const struct clksel *clksel; + struct dpll_data *dpll_data; + const char *clkdm_name; + struct clockdomain *clkdm; + const struct clk_hw_omap_ops *ops; +}; + +/* + * struct clk_hw_omap.flags possibilities + * + * XXX document the rest of the clock flags here + * + * ENABLE_REG_32BIT: (OMAP1 only) clock control register must be accessed + * with 32bit ops, by default OMAP1 uses 16bit ops. + * CLOCK_IDLE_CONTROL: (OMAP1 only) clock has autoidle support. + * CLOCK_NO_IDLE_PARENT: (OMAP1 only) when clock is enabled, its parent + * clock is put to no-idle mode. + * ENABLE_ON_INIT: Clock is enabled on init. + * INVERT_ENABLE: By default, clock enable bit behavior is '1' enable, '0' + * disable. This inverts the behavior making '0' enable and '1' disable. + * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL + * bits share the same register. This flag allows the + * omap4_dpllmx*() code to determine which GATE_CTRL bit field + * should be used. This is a temporary solution - a better approach + * would be to associate clock type-specific data with the clock, + * similar to the struct dpll_data approach. + * MEMMAP_ADDRESSING: Use memmap addressing to access clock registers. + */ +#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ +#define CLOCK_IDLE_CONTROL (1 << 1) +#define CLOCK_NO_IDLE_PARENT (1 << 2) +#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ +#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ +#define CLOCK_CLKOUTX2 (1 << 5) +#define MEMMAP_ADDRESSING (1 << 6) + +/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */ +#define DPLL_LOW_POWER_STOP 0x1 +#define DPLL_LOW_POWER_BYPASS 0x5 +#define DPLL_LOCKED 0x7 + +/* DPLL Type and DCO Selection Flags */ +#define DPLL_J_TYPE 0x1 + +/* Composite clock component types */ +enum { + CLK_COMPONENT_TYPE_GATE = 0, + CLK_COMPONENT_TYPE_DIVIDER, + CLK_COMPONENT_TYPE_MUX, + CLK_COMPONENT_TYPE_MAX, +}; + +/** + * struct ti_dt_clk - OMAP DT clock alias declarations + * @lk: clock lookup definition + * @node_name: clock DT node to map to + */ +struct ti_dt_clk { + struct clk_lookup lk; + char *node_name; +}; + +#define DT_CLK(dev, con, name) \ + { \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + }, \ + .node_name = name, \ + } + +/* Static memmap indices */ +enum { + TI_CLKM_CM = 0, + TI_CLKM_CM2, + TI_CLKM_PRM, + TI_CLKM_SCRM, + TI_CLKM_CTRL, + CLK_MAX_MEMMAPS +}; + +typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *); + +/** + * struct clk_omap_reg - OMAP register declaration + * @offset: offset from the master IP module base address + * @index: index of the master IP module + */ +struct clk_omap_reg { + u16 offset; + u16 index; +}; + +/** + * struct ti_clk_ll_ops - low-level register access ops for a clock + * @clk_readl: pointer to register read function + * @clk_writel: pointer to register write function + * + * Low-level register access ops are generally used by the basic clock types + * (clk-gate, clk-mux, clk-divider etc.) to provide support for various + * low-level hardware interfaces (direct MMIO, regmap etc.), but can also be + * used by other hardware-specific clock drivers if needed. + */ +struct ti_clk_ll_ops { + u32 (*clk_readl)(void __iomem *reg); + void (*clk_writel)(u32 val, void __iomem *reg); +}; + +extern struct ti_clk_ll_ops *ti_clk_ll_ops; + +extern const struct clk_ops ti_clk_divider_ops; +extern const struct clk_ops ti_clk_mux_ops; + +#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw) + +void omap2_init_clk_hw_omap_clocks(struct clk *clk); +int omap3_noncore_dpll_enable(struct clk_hw *hw); +void omap3_noncore_dpll_disable(struct clk_hw *hw); +int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index); +int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate); +int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate, + u8 index); +long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, + unsigned long rate, + unsigned long min_rate, + unsigned long max_rate, + unsigned long *best_parent_rate, + struct clk_hw **best_parent_clk); +unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw, + unsigned long parent_rate); +long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, + unsigned long target_rate, + unsigned long *parent_rate); +long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw, + unsigned long rate, + unsigned long min_rate, + unsigned long max_rate, + unsigned long *best_parent_rate, + struct clk_hw **best_parent_clk); +u8 omap2_init_dpll_parent(struct clk_hw *hw); +unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate); +long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate, + unsigned long *parent_rate); +void omap2_init_clk_clkdm(struct clk_hw *clk); +unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, + unsigned long parent_rate); +int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate); +long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate); +int omap2_clkops_enable_clkdm(struct clk_hw *hw); +void omap2_clkops_disable_clkdm(struct clk_hw *hw); +int omap2_clk_disable_autoidle_all(void); +void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks); +int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate, + unsigned long parent_rate); +int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate, u8 index); +int omap2_dflt_clk_enable(struct clk_hw *hw); +void omap2_dflt_clk_disable(struct clk_hw *hw); +int omap2_dflt_clk_is_enabled(struct clk_hw *hw); +void omap3_clk_lock_dpll5(void); +unsigned long omap2_dpllcore_recalc(struct clk_hw *hw, + unsigned long parent_rate); +int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate, + unsigned long parent_rate); +void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw); +void omap2xxx_clkt_vps_init(void); + +void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index); +void ti_dt_clocks_register(struct ti_dt_clk *oclks); +void ti_dt_clk_init_provider(struct device_node *np, int index); +void ti_dt_clk_init_retry_clks(void); +void ti_dt_clockdomains_setup(void); +int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw, + ti_of_clk_init_cb_t func); +int of_ti_clk_autoidle_setup(struct device_node *node); +int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type); + +int omap3430_dt_clk_init(void); +int omap3630_dt_clk_init(void); +int am35xx_dt_clk_init(void); +int ti81xx_dt_clk_init(void); +int omap4xxx_dt_clk_init(void); +int omap5xxx_dt_clk_init(void); +int dra7xx_dt_clk_init(void); +int am33xx_dt_clk_init(void); +int am43xx_dt_clk_init(void); +int omap2420_dt_clk_init(void); +int omap2430_dt_clk_init(void); + +#ifdef CONFIG_OF +void of_ti_clk_allow_autoidle_all(void); +void of_ti_clk_deny_autoidle_all(void); +#else +static inline void of_ti_clk_allow_autoidle_all(void) { } +static inline void of_ti_clk_deny_autoidle_all(void) { } +#endif + +extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; +extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait; +extern const struct clk_hw_omap_ops clkhwops_omap3_dpll; +extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; +extern const struct clk_hw_omap_ops clkhwops_wait; +extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait; +extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait; +extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait; +extern const struct clk_hw_omap_ops clkhwops_iclk; +extern const struct clk_hw_omap_ops clkhwops_iclk_wait; +extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait; +extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait; +extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait; + +#ifdef CONFIG_ATAGS +int omap3430_clk_legacy_init(void); +int omap3430es1_clk_legacy_init(void); +int omap36xx_clk_legacy_init(void); +int am35xx_clk_legacy_init(void); +#else +static inline int omap3430_clk_legacy_init(void) { return -ENXIO; } +static inline int omap3430es1_clk_legacy_init(void) { return -ENXIO; } +static inline int omap36xx_clk_legacy_init(void) { return -ENXIO; } +static inline int am35xx_clk_legacy_init(void) { return -ENXIO; } +#endif + + +#endif |