diff options
Diffstat (limited to 'kernel/include/dt-bindings/pinctrl')
| -rw-r--r-- | kernel/include/dt-bindings/pinctrl/am33xx.h | 43 | ||||
| -rw-r--r-- | kernel/include/dt-bindings/pinctrl/am43xx.h | 33 | ||||
| -rw-r--r-- | kernel/include/dt-bindings/pinctrl/at91.h | 40 | ||||
| -rw-r--r-- | kernel/include/dt-bindings/pinctrl/dra.h | 51 | ||||
| -rw-r--r-- | kernel/include/dt-bindings/pinctrl/mt65xx.h | 40 | ||||
| -rw-r--r-- | kernel/include/dt-bindings/pinctrl/nomadik.h | 36 | ||||
| -rw-r--r-- | kernel/include/dt-bindings/pinctrl/omap.h | 91 | ||||
| -rw-r--r-- | kernel/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h | 7 | ||||
| -rw-r--r-- | kernel/include/dt-bindings/pinctrl/pinctrl-tegra.h | 45 | ||||
| -rw-r--r-- | kernel/include/dt-bindings/pinctrl/qcom,pmic-gpio.h | 157 | ||||
| -rw-r--r-- | kernel/include/dt-bindings/pinctrl/qcom,pmic-mpp.h | 48 | ||||
| -rw-r--r-- | kernel/include/dt-bindings/pinctrl/rockchip.h | 34 | ||||
| -rw-r--r-- | kernel/include/dt-bindings/pinctrl/sun4i-a10.h | 62 |
13 files changed, 687 insertions, 0 deletions
diff --git a/kernel/include/dt-bindings/pinctrl/am33xx.h b/kernel/include/dt-bindings/pinctrl/am33xx.h new file mode 100644 index 000000000..226f77246 --- /dev/null +++ b/kernel/include/dt-bindings/pinctrl/am33xx.h @@ -0,0 +1,43 @@ +/* + * This header provides constants specific to AM33XX pinctrl bindings. + */ + +#ifndef _DT_BINDINGS_PINCTRL_AM33XX_H +#define _DT_BINDINGS_PINCTRL_AM33XX_H + +#include <dt-bindings/pinctrl/omap.h> + +/* am33xx specific mux bit defines */ +#undef PULL_ENA +#undef INPUT_EN + +#define PULL_DISABLE (1 << 3) +#define INPUT_EN (1 << 5) +#define SLEWCTRL_SLOW (1 << 6) +#define SLEWCTRL_FAST 0 + +/* update macro depending on INPUT_EN and PULL_ENA */ +#undef PIN_OUTPUT +#undef PIN_OUTPUT_PULLUP +#undef PIN_OUTPUT_PULLDOWN +#undef PIN_INPUT +#undef PIN_INPUT_PULLUP +#undef PIN_INPUT_PULLDOWN + +#define PIN_OUTPUT (PULL_DISABLE) +#define PIN_OUTPUT_PULLUP (PULL_UP) +#define PIN_OUTPUT_PULLDOWN 0 +#define PIN_INPUT (INPUT_EN | PULL_DISABLE) +#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP) +#define PIN_INPUT_PULLDOWN (INPUT_EN) + +/* undef non-existing modes */ +#undef PIN_OFF_NONE +#undef PIN_OFF_OUTPUT_HIGH +#undef PIN_OFF_OUTPUT_LOW +#undef PIN_OFF_INPUT_PULLUP +#undef PIN_OFF_INPUT_PULLDOWN +#undef PIN_OFF_WAKEUPENABLE + +#endif + diff --git a/kernel/include/dt-bindings/pinctrl/am43xx.h b/kernel/include/dt-bindings/pinctrl/am43xx.h new file mode 100644 index 000000000..5f4d01898 --- /dev/null +++ b/kernel/include/dt-bindings/pinctrl/am43xx.h @@ -0,0 +1,33 @@ +/* + * This header provides constants specific to AM43XX pinctrl bindings. + */ + +#ifndef _DT_BINDINGS_PINCTRL_AM43XX_H +#define _DT_BINDINGS_PINCTRL_AM43XX_H + +#define MUX_MODE0 0 +#define MUX_MODE1 1 +#define MUX_MODE2 2 +#define MUX_MODE3 3 +#define MUX_MODE4 4 +#define MUX_MODE5 5 +#define MUX_MODE6 6 +#define MUX_MODE7 7 +#define MUX_MODE8 8 + +#define PULL_DISABLE (1 << 16) +#define PULL_UP (1 << 17) +#define INPUT_EN (1 << 18) +#define SLEWCTRL_SLOW (1 << 19) +#define SLEWCTRL_FAST 0 +#define DS0_PULL_UP_DOWN_EN (1 << 27) + +#define PIN_OUTPUT (PULL_DISABLE) +#define PIN_OUTPUT_PULLUP (PULL_UP) +#define PIN_OUTPUT_PULLDOWN 0 +#define PIN_INPUT (INPUT_EN | PULL_DISABLE) +#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP) +#define PIN_INPUT_PULLDOWN (INPUT_EN) + +#endif + diff --git a/kernel/include/dt-bindings/pinctrl/at91.h b/kernel/include/dt-bindings/pinctrl/at91.h new file mode 100644 index 000000000..bbca3d038 --- /dev/null +++ b/kernel/include/dt-bindings/pinctrl/at91.h @@ -0,0 +1,40 @@ +/* + * This header provides constants for most at91 pinctrl bindings. + * + * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * GPLv2 only + */ + +#ifndef __DT_BINDINGS_AT91_PINCTRL_H__ +#define __DT_BINDINGS_AT91_PINCTRL_H__ + +#define AT91_PINCTRL_NONE (0 << 0) +#define AT91_PINCTRL_PULL_UP (1 << 0) +#define AT91_PINCTRL_MULTI_DRIVE (1 << 1) +#define AT91_PINCTRL_DEGLITCH (1 << 2) +#define AT91_PINCTRL_PULL_DOWN (1 << 3) +#define AT91_PINCTRL_DIS_SCHMIT (1 << 4) +#define AT91_PINCTRL_DEBOUNCE (1 << 16) +#define AT91_PINCTRL_DEBOUNCE_VAL(x) (x << 17) + +#define AT91_PINCTRL_PULL_UP_DEGLITCH (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DEGLITCH) + +#define AT91_PINCTRL_DRIVE_STRENGTH_DEFAULT (0x0 << 5) +#define AT91_PINCTRL_DRIVE_STRENGTH_LOW (0x1 << 5) +#define AT91_PINCTRL_DRIVE_STRENGTH_MED (0x2 << 5) +#define AT91_PINCTRL_DRIVE_STRENGTH_HI (0x3 << 5) + +#define AT91_PIOA 0 +#define AT91_PIOB 1 +#define AT91_PIOC 2 +#define AT91_PIOD 3 +#define AT91_PIOE 4 + +#define AT91_PERIPH_GPIO 0 +#define AT91_PERIPH_A 1 +#define AT91_PERIPH_B 2 +#define AT91_PERIPH_C 3 +#define AT91_PERIPH_D 4 + +#endif /* __DT_BINDINGS_AT91_PINCTRL_H__ */ diff --git a/kernel/include/dt-bindings/pinctrl/dra.h b/kernel/include/dt-bindings/pinctrl/dra.h new file mode 100644 index 000000000..7448edff4 --- /dev/null +++ b/kernel/include/dt-bindings/pinctrl/dra.h @@ -0,0 +1,51 @@ +/* + * This header provides constants for DRA pinctrl bindings. + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Author: Rajendra Nayak <rnayak@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _DT_BINDINGS_PINCTRL_DRA_H +#define _DT_BINDINGS_PINCTRL_DRA_H + +/* DRA7 mux mode options for each pin. See TRM for options */ +#define MUX_MODE0 0x0 +#define MUX_MODE1 0x1 +#define MUX_MODE2 0x2 +#define MUX_MODE3 0x3 +#define MUX_MODE4 0x4 +#define MUX_MODE5 0x5 +#define MUX_MODE6 0x6 +#define MUX_MODE7 0x7 +#define MUX_MODE8 0x8 +#define MUX_MODE9 0x9 +#define MUX_MODE10 0xa +#define MUX_MODE11 0xb +#define MUX_MODE12 0xc +#define MUX_MODE13 0xd +#define MUX_MODE14 0xe +#define MUX_MODE15 0xf + +#define PULL_ENA (0 << 16) +#define PULL_DIS (1 << 16) +#define PULL_UP (1 << 17) +#define INPUT_EN (1 << 18) +#define SLEWCONTROL (1 << 19) +#define WAKEUP_EN (1 << 24) +#define WAKEUP_EVENT (1 << 25) + +/* Active pin states */ +#define PIN_OUTPUT (0 | PULL_DIS) +#define PIN_OUTPUT_PULLUP (PULL_UP) +#define PIN_OUTPUT_PULLDOWN (0) +#define PIN_INPUT (INPUT_EN | PULL_DIS) +#define PIN_INPUT_SLEW (INPUT_EN | SLEWCONTROL) +#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP) +#define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN) + +#endif + diff --git a/kernel/include/dt-bindings/pinctrl/mt65xx.h b/kernel/include/dt-bindings/pinctrl/mt65xx.h new file mode 100644 index 000000000..1198f4541 --- /dev/null +++ b/kernel/include/dt-bindings/pinctrl/mt65xx.h @@ -0,0 +1,40 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Hongzhou.Yang <hongzhou.yang@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_PINCTRL_MT65XX_H +#define _DT_BINDINGS_PINCTRL_MT65XX_H + +#define MTK_PIN_NO(x) ((x) << 8) +#define MTK_GET_PIN_NO(x) ((x) >> 8) +#define MTK_GET_PIN_FUNC(x) ((x) & 0xf) + +#define MTK_PUPD_SET_R1R0_00 100 +#define MTK_PUPD_SET_R1R0_01 101 +#define MTK_PUPD_SET_R1R0_10 102 +#define MTK_PUPD_SET_R1R0_11 103 + +#define MTK_DRIVE_2mA 2 +#define MTK_DRIVE_4mA 4 +#define MTK_DRIVE_6mA 6 +#define MTK_DRIVE_8mA 8 +#define MTK_DRIVE_10mA 10 +#define MTK_DRIVE_12mA 12 +#define MTK_DRIVE_14mA 14 +#define MTK_DRIVE_16mA 16 +#define MTK_DRIVE_20mA 20 +#define MTK_DRIVE_24mA 24 +#define MTK_DRIVE_28mA 28 +#define MTK_DRIVE_32mA 32 + +#endif /* _DT_BINDINGS_PINCTRL_MT65XX_H */ diff --git a/kernel/include/dt-bindings/pinctrl/nomadik.h b/kernel/include/dt-bindings/pinctrl/nomadik.h new file mode 100644 index 000000000..638fb321a --- /dev/null +++ b/kernel/include/dt-bindings/pinctrl/nomadik.h @@ -0,0 +1,36 @@ +/* + * nomadik.h + * + * Copyright (C) ST-Ericsson SA 2013 + * Author: Gabriel Fernandez <gabriel.fernandez@st.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL), version 2 + */ + +#define INPUT_NOPULL 0 +#define INPUT_PULLUP 1 +#define INPUT_PULLDOWN 2 + +#define OUTPUT_LOW 0 +#define OUTPUT_HIGH 1 +#define DIR_OUTPUT 2 + +#define SLPM_DISABLED 0 +#define SLPM_ENABLED 1 + +#define SLPM_INPUT_NOPULL 0 +#define SLPM_INPUT_PULLUP 1 +#define SLPM_INPUT_PULLDOWN 2 +#define SLPM_DIR_INPUT 3 + +#define SLPM_OUTPUT_LOW 0 +#define SLPM_OUTPUT_HIGH 1 +#define SLPM_DIR_OUTPUT 2 + +#define SLPM_WAKEUP_DISABLE 0 +#define SLPM_WAKEUP_ENABLE 1 + +#define GPIOMODE_DISABLED 0 +#define GPIOMODE_ENABLED 1 + +#define SLPM_PDIS_DISABLED 0 +#define SLPM_PDIS_ENABLED 1 diff --git a/kernel/include/dt-bindings/pinctrl/omap.h b/kernel/include/dt-bindings/pinctrl/omap.h new file mode 100644 index 000000000..139492597 --- /dev/null +++ b/kernel/include/dt-bindings/pinctrl/omap.h @@ -0,0 +1,91 @@ +/* + * This header provides constants for OMAP pinctrl bindings. + * + * Copyright (C) 2009 Nokia + * Copyright (C) 2009-2010 Texas Instruments + */ + +#ifndef _DT_BINDINGS_PINCTRL_OMAP_H +#define _DT_BINDINGS_PINCTRL_OMAP_H + +/* 34xx mux mode options for each pin. See TRM for options */ +#define MUX_MODE0 0 +#define MUX_MODE1 1 +#define MUX_MODE2 2 +#define MUX_MODE3 3 +#define MUX_MODE4 4 +#define MUX_MODE5 5 +#define MUX_MODE6 6 +#define MUX_MODE7 7 + +/* 24xx/34xx mux bit defines */ +#define PULL_ENA (1 << 3) +#define PULL_UP (1 << 4) +#define ALTELECTRICALSEL (1 << 5) + +/* omap3/4/5 specific mux bit defines */ +#define INPUT_EN (1 << 8) +#define OFF_EN (1 << 9) +#define OFFOUT_EN (1 << 10) +#define OFFOUT_VAL (1 << 11) +#define OFF_PULL_EN (1 << 12) +#define OFF_PULL_UP (1 << 13) +#define WAKEUP_EN (1 << 14) +#define WAKEUP_EVENT (1 << 15) + +/* Active pin states */ +#define PIN_OUTPUT 0 +#define PIN_OUTPUT_PULLUP (PIN_OUTPUT | PULL_ENA | PULL_UP) +#define PIN_OUTPUT_PULLDOWN (PIN_OUTPUT | PULL_ENA) +#define PIN_INPUT INPUT_EN +#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP) +#define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN) + +/* Off mode states */ +#define PIN_OFF_NONE 0 +#define PIN_OFF_OUTPUT_HIGH (OFF_EN | OFFOUT_EN | OFFOUT_VAL) +#define PIN_OFF_OUTPUT_LOW (OFF_EN | OFFOUT_EN) +#define PIN_OFF_INPUT_PULLUP (OFF_EN | OFF_PULL_EN | OFF_PULL_UP) +#define PIN_OFF_INPUT_PULLDOWN (OFF_EN | OFF_PULL_EN) +#define PIN_OFF_WAKEUPENABLE WAKEUP_EN + +/* + * Macros to allow using the absolute physical address instead of the + * padconf registers instead of the offset from padconf base. + */ +#define OMAP_IOPAD_OFFSET(pa, offset) (((pa) & 0xffff) - (offset)) + +#define OMAP2420_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0030) (val) +#define OMAP2430_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2030) (val) +#define OMAP3_CORE1_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2030) (val) +#define OMAP3430_CORE2_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x25d8) (val) +#define OMAP3630_CORE2_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x25a0) (val) +#define OMAP3_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2a00) (val) +#define DM816X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) +#define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) +#define AM4372_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) +#define DRA7XX_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x3400) (val) + +/* + * Macros to allow using the offset from the padconf physical address + * instead of the offset from padconf base. + */ +#define OMAP_PADCONF_OFFSET(offset, base_offset) ((offset) - (base_offset)) + +#define OMAP4_IOPAD(offset, val) OMAP_PADCONF_OFFSET((offset), 0x0040) (val) +#define OMAP5_IOPAD(offset, val) OMAP_PADCONF_OFFSET((offset), 0x0040) (val) + +/* + * Define some commonly used pins configured by the boards. + * Note that some boards use alternative pins, so check + * the schematics before using these. + */ +#define OMAP3_UART1_RX 0x152 +#define OMAP3_UART2_RX 0x14a +#define OMAP3_UART3_RX 0x16e +#define OMAP4_UART2_RX 0xdc +#define OMAP4_UART3_RX 0x104 +#define OMAP4_UART4_RX 0x11c + +#endif + diff --git a/kernel/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h b/kernel/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h new file mode 100644 index 000000000..914d56da9 --- /dev/null +++ b/kernel/include/dt-bindings/pinctrl/pinctrl-tegra-xusb.h @@ -0,0 +1,7 @@ +#ifndef _DT_BINDINGS_PINCTRL_TEGRA_XUSB_H +#define _DT_BINDINGS_PINCTRL_TEGRA_XUSB_H 1 + +#define TEGRA_XUSB_PADCTL_PCIE 0 +#define TEGRA_XUSB_PADCTL_SATA 1 + +#endif /* _DT_BINDINGS_PINCTRL_TEGRA_XUSB_H */ diff --git a/kernel/include/dt-bindings/pinctrl/pinctrl-tegra.h b/kernel/include/dt-bindings/pinctrl/pinctrl-tegra.h new file mode 100644 index 000000000..ebafa498b --- /dev/null +++ b/kernel/include/dt-bindings/pinctrl/pinctrl-tegra.h @@ -0,0 +1,45 @@ +/* + * This header provides constants for Tegra pinctrl bindings. + * + * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. + * + * Author: Laxman Dewangan <ldewangan@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef _DT_BINDINGS_PINCTRL_TEGRA_H +#define _DT_BINDINGS_PINCTRL_TEGRA_H + +/* + * Enable/disable for diffeent dt properties. This is applicable for + * properties nvidia,enable-input, nvidia,tristate, nvidia,open-drain, + * nvidia,lock, nvidia,rcv-sel, nvidia,high-speed-mode, nvidia,schmitt. + */ +#define TEGRA_PIN_DISABLE 0 +#define TEGRA_PIN_ENABLE 1 + +#define TEGRA_PIN_PULL_NONE 0 +#define TEGRA_PIN_PULL_DOWN 1 +#define TEGRA_PIN_PULL_UP 2 + +/* Low power mode driver */ +#define TEGRA_PIN_LP_DRIVE_DIV_8 0 +#define TEGRA_PIN_LP_DRIVE_DIV_4 1 +#define TEGRA_PIN_LP_DRIVE_DIV_2 2 +#define TEGRA_PIN_LP_DRIVE_DIV_1 3 + +/* Rising/Falling slew rate */ +#define TEGRA_PIN_SLEW_RATE_FASTEST 0 +#define TEGRA_PIN_SLEW_RATE_FAST 1 +#define TEGRA_PIN_SLEW_RATE_SLOW 2 +#define TEGRA_PIN_SLEW_RATE_SLOWEST 3 + +#endif diff --git a/kernel/include/dt-bindings/pinctrl/qcom,pmic-gpio.h b/kernel/include/dt-bindings/pinctrl/qcom,pmic-gpio.h new file mode 100644 index 000000000..aafa76cb5 --- /dev/null +++ b/kernel/include/dt-bindings/pinctrl/qcom,pmic-gpio.h @@ -0,0 +1,157 @@ +/* + * This header provides constants for the Qualcomm PMIC GPIO binding. + */ + +#ifndef _DT_BINDINGS_PINCTRL_QCOM_PMIC_GPIO_H +#define _DT_BINDINGS_PINCTRL_QCOM_PMIC_GPIO_H + +#define PMIC_GPIO_PULL_UP_30 0 +#define PMIC_GPIO_PULL_UP_1P5 1 +#define PMIC_GPIO_PULL_UP_31P5 2 +#define PMIC_GPIO_PULL_UP_1P5_30 3 + +#define PMIC_GPIO_STRENGTH_NO 0 +#define PMIC_GPIO_STRENGTH_HIGH 1 +#define PMIC_GPIO_STRENGTH_MED 2 +#define PMIC_GPIO_STRENGTH_LOW 3 + +/* + * Note: PM8018 GPIO3 and GPIO4 are supporting + * only S3 and L2 options (1.8V) + */ +#define PM8018_GPIO_L6 0 +#define PM8018_GPIO_L5 1 +#define PM8018_GPIO_S3 2 +#define PM8018_GPIO_L14 3 +#define PM8018_GPIO_L2 4 +#define PM8018_GPIO_L4 5 +#define PM8018_GPIO_VDD 6 + +/* + * Note: PM8038 GPIO7 and GPIO8 are supporting + * only L11 and L4 options (1.8V) + */ +#define PM8038_GPIO_VPH 0 +#define PM8038_GPIO_BB 1 +#define PM8038_GPIO_L11 2 +#define PM8038_GPIO_L15 3 +#define PM8038_GPIO_L4 4 +#define PM8038_GPIO_L3 5 +#define PM8038_GPIO_L17 6 + +#define PM8058_GPIO_VPH 0 +#define PM8058_GPIO_BB 1 +#define PM8058_GPIO_S3 2 +#define PM8058_GPIO_L3 3 +#define PM8058_GPIO_L7 4 +#define PM8058_GPIO_L6 5 +#define PM8058_GPIO_L5 6 +#define PM8058_GPIO_L2 7 + +/* + * Note: PM8916 GPIO1 and GPIO2 are supporting + * only L2(1.15V) and L5(1.8V) options + */ +#define PM8916_GPIO_VPH 0 +#define PM8916_GPIO_L2 2 +#define PM8916_GPIO_L5 3 + +#define PM8917_GPIO_VPH 0 +#define PM8917_GPIO_S4 2 +#define PM8917_GPIO_L15 3 +#define PM8917_GPIO_L4 4 +#define PM8917_GPIO_L3 5 +#define PM8917_GPIO_L17 6 + +#define PM8921_GPIO_VPH 0 +#define PM8921_GPIO_BB 1 +#define PM8921_GPIO_S4 2 +#define PM8921_GPIO_L15 3 +#define PM8921_GPIO_L4 4 +#define PM8921_GPIO_L3 5 +#define PM8921_GPIO_L17 6 + +/* + * Note: PM8941 gpios from 15 to 18 are supporting + * only S3 and L6 options (1.8V) + */ +#define PM8941_GPIO_VPH 0 +#define PM8941_GPIO_L1 1 +#define PM8941_GPIO_S3 2 +#define PM8941_GPIO_L6 3 + +/* + * Note: PMA8084 gpios from 15 to 18 are supporting + * only S4 and L6 options (1.8V) + */ +#define PMA8084_GPIO_VPH 0 +#define PMA8084_GPIO_L1 1 +#define PMA8084_GPIO_S4 2 +#define PMA8084_GPIO_L6 3 + +/* To be used with "function" */ +#define PMIC_GPIO_FUNC_NORMAL "normal" +#define PMIC_GPIO_FUNC_PAIRED "paired" +#define PMIC_GPIO_FUNC_FUNC1 "func1" +#define PMIC_GPIO_FUNC_FUNC2 "func2" +#define PMIC_GPIO_FUNC_DTEST1 "dtest1" +#define PMIC_GPIO_FUNC_DTEST2 "dtest2" +#define PMIC_GPIO_FUNC_DTEST3 "dtest3" +#define PMIC_GPIO_FUNC_DTEST4 "dtest4" + +#define PM8038_GPIO1_2_LPG_DRV PMIC_GPIO_FUNC_FUNC1 +#define PM8038_GPIO3_5V_BOOST_EN PMIC_GPIO_FUNC_FUNC1 +#define PM8038_GPIO4_SSBI_ALT_CLK PMIC_GPIO_FUNC_FUNC1 +#define PM8038_GPIO5_6_EXT_REG_EN PMIC_GPIO_FUNC_FUNC1 +#define PM8038_GPIO10_11_EXT_REG_EN PMIC_GPIO_FUNC_FUNC1 +#define PM8038_GPIO6_7_CLK PMIC_GPIO_FUNC_FUNC1 +#define PM8038_GPIO9_BAT_ALRM_OUT PMIC_GPIO_FUNC_FUNC1 +#define PM8038_GPIO6_12_KYPD_DRV PMIC_GPIO_FUNC_FUNC2 + +#define PM8058_GPIO7_8_MP3_CLK PMIC_GPIO_FUNC_FUNC1 +#define PM8058_GPIO7_8_BCLK_19P2MHZ PMIC_GPIO_FUNC_FUNC2 +#define PM8058_GPIO9_26_KYPD_DRV PMIC_GPIO_FUNC_FUNC1 +#define PM8058_GPIO21_23_UART_TX PMIC_GPIO_FUNC_FUNC2 +#define PM8058_GPIO24_26_LPG_DRV PMIC_GPIO_FUNC_FUNC2 +#define PM8058_GPIO33_BCLK_19P2MHZ PMIC_GPIO_FUNC_FUNC1 +#define PM8058_GPIO34_35_MP3_CLK PMIC_GPIO_FUNC_FUNC1 +#define PM8058_GPIO36_BCLK_19P2MHZ PMIC_GPIO_FUNC_FUNC1 +#define PM8058_GPIO37_UPL_OUT PMIC_GPIO_FUNC_FUNC1 +#define PM8058_GPIO37_UART_M_RX PMIC_GPIO_FUNC_FUNC2 +#define PM8058_GPIO38_XO_SLEEP_CLK PMIC_GPIO_FUNC_FUNC1 +#define PM8058_GPIO38_39_CLK_32KHZ PMIC_GPIO_FUNC_FUNC2 +#define PM8058_GPIO39_MP3_CLK PMIC_GPIO_FUNC_FUNC1 +#define PM8058_GPIO40_EXT_BB_EN PMIC_GPIO_FUNC_FUNC1 + +#define PM8916_GPIO1_BAT_ALRM_OUT PMIC_GPIO_FUNC_FUNC1 +#define PM8916_GPIO1_KEYP_DRV PMIC_GPIO_FUNC_FUNC2 +#define PM8916_GPIO2_DIV_CLK PMIC_GPIO_FUNC_FUNC1 +#define PM8916_GPIO2_SLEEP_CLK PMIC_GPIO_FUNC_FUNC2 +#define PM8916_GPIO3_KEYP_DRV PMIC_GPIO_FUNC_FUNC1 +#define PM8916_GPIO4_KEYP_DRV PMIC_GPIO_FUNC_FUNC2 + +#define PM8917_GPIO9_18_KEYP_DRV PMIC_GPIO_FUNC_FUNC1 +#define PM8917_GPIO20_BAT_ALRM_OUT PMIC_GPIO_FUNC_FUNC1 +#define PM8917_GPIO21_23_UART_TX PMIC_GPIO_FUNC_FUNC2 +#define PM8917_GPIO25_26_EXT_REG_EN PMIC_GPIO_FUNC_FUNC1 +#define PM8917_GPIO37_38_XO_SLEEP_CLK PMIC_GPIO_FUNC_FUNC1 +#define PM8917_GPIO37_38_MP3_CLK PMIC_GPIO_FUNC_FUNC2 + +#define PM8941_GPIO9_14_KYPD_DRV PMIC_GPIO_FUNC_FUNC1 +#define PM8941_GPIO15_18_DIV_CLK PMIC_GPIO_FUNC_FUNC1 +#define PM8941_GPIO15_18_SLEEP_CLK PMIC_GPIO_FUNC_FUNC2 +#define PM8941_GPIO23_26_KYPD_DRV PMIC_GPIO_FUNC_FUNC1 +#define PM8941_GPIO23_26_LPG_DRV_HI PMIC_GPIO_FUNC_FUNC2 +#define PM8941_GPIO31_BAT_ALRM_OUT PMIC_GPIO_FUNC_FUNC1 +#define PM8941_GPIO33_36_LPG_DRV_3D PMIC_GPIO_FUNC_FUNC1 +#define PM8941_GPIO33_36_LPG_DRV_HI PMIC_GPIO_FUNC_FUNC2 + +#define PMA8084_GPIO4_5_LPG_DRV PMIC_GPIO_FUNC_FUNC1 +#define PMA8084_GPIO7_10_LPG_DRV PMIC_GPIO_FUNC_FUNC1 +#define PMA8084_GPIO5_14_KEYP_DRV PMIC_GPIO_FUNC_FUNC2 +#define PMA8084_GPIO19_21_KEYP_DRV PMIC_GPIO_FUNC_FUNC2 +#define PMA8084_GPIO15_18_DIV_CLK PMIC_GPIO_FUNC_FUNC1 +#define PMA8084_GPIO15_18_SLEEP_CLK PMIC_GPIO_FUNC_FUNC2 +#define PMA8084_GPIO22_BAT_ALRM_OUT PMIC_GPIO_FUNC_FUNC1 + +#endif diff --git a/kernel/include/dt-bindings/pinctrl/qcom,pmic-mpp.h b/kernel/include/dt-bindings/pinctrl/qcom,pmic-mpp.h new file mode 100644 index 000000000..c10205491 --- /dev/null +++ b/kernel/include/dt-bindings/pinctrl/qcom,pmic-mpp.h @@ -0,0 +1,48 @@ +/* + * This header provides constants for the Qualcomm PMIC's + * Multi-Purpose Pin binding. + */ + +#ifndef _DT_BINDINGS_PINCTRL_QCOM_PMIC_MPP_H +#define _DT_BINDINGS_PINCTRL_QCOM_PMIC_MPP_H + +/* power-source */ +#define PM8841_MPP_VPH 0 +#define PM8841_MPP_S3 2 + +#define PM8916_MPP_VPH 0 +#define PM8916_MPP_L2 2 +#define PM8916_MPP_L5 3 + +#define PM8941_MPP_VPH 0 +#define PM8941_MPP_L1 1 +#define PM8941_MPP_S3 2 +#define PM8941_MPP_L6 3 + +#define PMA8084_MPP_VPH 0 +#define PMA8084_MPP_L1 1 +#define PMA8084_MPP_S4 2 +#define PMA8084_MPP_L6 3 + +/* + * Analog Input - Set the source for analog input. + * To be used with "qcom,amux-route" property + */ +#define PMIC_MPP_AMUX_ROUTE_CH5 0 +#define PMIC_MPP_AMUX_ROUTE_CH6 1 +#define PMIC_MPP_AMUX_ROUTE_CH7 2 +#define PMIC_MPP_AMUX_ROUTE_CH8 3 +#define PMIC_MPP_AMUX_ROUTE_ABUS1 4 +#define PMIC_MPP_AMUX_ROUTE_ABUS2 5 +#define PMIC_MPP_AMUX_ROUTE_ABUS3 6 +#define PMIC_MPP_AMUX_ROUTE_ABUS4 7 + +/* To be used with "function" */ +#define PMIC_MPP_FUNC_NORMAL "normal" +#define PMIC_MPP_FUNC_PAIRED "paired" +#define PMIC_MPP_FUNC_DTEST1 "dtest1" +#define PMIC_MPP_FUNC_DTEST2 "dtest2" +#define PMIC_MPP_FUNC_DTEST3 "dtest3" +#define PMIC_MPP_FUNC_DTEST4 "dtest4" + +#endif diff --git a/kernel/include/dt-bindings/pinctrl/rockchip.h b/kernel/include/dt-bindings/pinctrl/rockchip.h new file mode 100644 index 000000000..743e66a95 --- /dev/null +++ b/kernel/include/dt-bindings/pinctrl/rockchip.h @@ -0,0 +1,34 @@ +/* + * Header providing constants for Rockchip pinctrl bindings. + * + * Copyright (c) 2013 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DT_BINDINGS_ROCKCHIP_PINCTRL_H__ +#define __DT_BINDINGS_ROCKCHIP_PINCTRL_H__ + +#define RK_GPIO0 0 +#define RK_GPIO1 1 +#define RK_GPIO2 2 +#define RK_GPIO3 3 +#define RK_GPIO4 4 +#define RK_GPIO6 6 + +#define RK_FUNC_GPIO 0 +#define RK_FUNC_1 1 +#define RK_FUNC_2 2 +#define RK_FUNC_3 3 +#define RK_FUNC_4 4 + +#endif diff --git a/kernel/include/dt-bindings/pinctrl/sun4i-a10.h b/kernel/include/dt-bindings/pinctrl/sun4i-a10.h new file mode 100644 index 000000000..f7553c143 --- /dev/null +++ b/kernel/include/dt-bindings/pinctrl/sun4i-a10.h @@ -0,0 +1,62 @@ +/* + * Copyright 2014 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef __DT_BINDINGS_PINCTRL_SUN4I_A10_H_ +#define __DT_BINDINGS_PINCTRL_SUN4I_A10_H_ + +#define SUN4I_PINCTRL_10_MA 0 +#define SUN4I_PINCTRL_20_MA 1 +#define SUN4I_PINCTRL_30_MA 2 +#define SUN4I_PINCTRL_40_MA 3 + +#define SUN4I_PINCTRL_NO_PULL 0 +#define SUN4I_PINCTRL_PULL_UP 1 +#define SUN4I_PINCTRL_PULL_DOWN 2 + +#endif /* __DT_BINDINGS_PINCTRL_SUN4I_A10_H_ */ |