summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/watchdog/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/watchdog/Kconfig')
-rw-r--r--kernel/drivers/watchdog/Kconfig84
1 files changed, 79 insertions, 5 deletions
diff --git a/kernel/drivers/watchdog/Kconfig b/kernel/drivers/watchdog/Kconfig
index e5e7c5505..1c427beff 100644
--- a/kernel/drivers/watchdog/Kconfig
+++ b/kernel/drivers/watchdog/Kconfig
@@ -1,3 +1,4 @@
+
#
# Watchdog device configuration
#
@@ -96,6 +97,15 @@ config DA9063_WATCHDOG
This driver can be built as a module. The module name is da9063_wdt.
+config DA9062_WATCHDOG
+ tristate "Dialog DA9062 Watchdog"
+ depends on MFD_DA9062
+ select WATCHDOG_CORE
+ help
+ Support for the watchdog in the DA9062 PMIC.
+
+ This driver can be built as a module. The module name is da9062_wdt.
+
config GPIO_WATCHDOG
tristate "Watchdog device controlled through GPIO-line"
depends on OF_GPIO
@@ -104,6 +114,17 @@ config GPIO_WATCHDOG
If you say yes here you get support for watchdog device
controlled through GPIO-line.
+config GPIO_WATCHDOG_ARCH_INITCALL
+ bool "Register the watchdog as early as possible"
+ depends on GPIO_WATCHDOG=y
+ help
+ In some situations, the default initcall level (module_init)
+ in not early enough in the boot process to avoid the watchdog
+ to be triggered.
+ If you say yes here, the initcall level would be raised to
+ arch_initcall.
+ If in doubt, say N.
+
config MENF21BMC_WATCHDOG
tristate "MEN 14F021P00 BMC Watchdog"
depends on MFD_MENF21BMC
@@ -167,8 +188,18 @@ config AT91SAM9X_WATCHDOG
Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
reboot your system when the timeout is reached.
+config SAMA5D4_WATCHDOG
+ tristate "Atmel SAMA5D4 Watchdog Timer"
+ depends on ARCH_AT91
+ select WATCHDOG_CORE
+ help
+ Atmel SAMA5D4 watchdog timer is embedded into SAMA5D4 chips.
+ Its Watchdog Timer Mode Register can be written more than once.
+ This will reboot your system when the timeout is reached.
+
config CADENCE_WATCHDOG
tristate "Cadence Watchdog Timer"
+ depends on HAS_IOMEM
select WATCHDOG_CORE
help
Say Y here if you want to include support for the watchdog
@@ -408,14 +439,14 @@ config TS72XX_WATCHDOG
config MAX63XX_WATCHDOG
tristate "Max63xx watchdog"
- depends on ARM && HAS_IOMEM
+ depends on HAS_IOMEM
select WATCHDOG_CORE
help
Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.
config IMX2_WDT
tristate "IMX2+ Watchdog"
- depends on ARCH_MXC
+ depends on ARCH_MXC || ARCH_LAYERSCAPE
select REGMAP_MMIO
select WATCHDOG_CORE
help
@@ -470,6 +501,18 @@ config SIRFSOC_WATCHDOG
Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When
the watchdog triggers the system will be reset.
+config ST_LPC_WATCHDOG
+ tristate "STMicroelectronics LPC Watchdog"
+ depends on ARCH_STI
+ depends on OF
+ select WATCHDOG_CORE
+ help
+ Say Y here to include STMicroelectronics Low Power Controller
+ (LPC) based Watchdog timer support.
+
+ To compile this driver as a module, choose M here: the
+ module will be called st_lpc_wdt.
+
config TEGRA_WATCHDOG
tristate "Tegra watchdog"
depends on (ARCH_TEGRA || COMPILE_TEST) && HAS_IOMEM
@@ -514,6 +557,27 @@ config MEDIATEK_WATCHDOG
To compile this driver as a module, choose M here: the
module will be called mtk_wdt.
+config DIGICOLOR_WATCHDOG
+ tristate "Conexant Digicolor SoCs watchdog support"
+ depends on ARCH_DIGICOLOR
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for the watchdog timer
+ in Conexant Digicolor SoCs.
+ To compile this driver as a module, choose M here: the
+ module will be called digicolor_wdt.
+
+config LPC18XX_WATCHDOG
+ tristate "LPC18xx/43xx Watchdog"
+ depends on ARCH_LPC18XX || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Say Y here if to include support for the watchdog timer
+ in NXP LPC SoCs family, which includes LPC18xx/LPC43xx
+ processors.
+ To compile this driver as a module, choose M here: the
+ module will be called lpc18xx_wdt.
+
# AVR32 Architecture
config AT32AP700X_WDT
@@ -753,7 +817,9 @@ config ITCO_WDT
tristate "Intel TCO Timer/Watchdog"
depends on (X86 || IA64) && PCI
select WATCHDOG_CORE
- select LPC_ICH
+ depends on I2C || I2C=n
+ select LPC_ICH if !EXPERT
+ select I2C_I801 if !EXPERT && I2C
---help---
Hardware driver for the intel TCO timer based watchdog devices.
These drivers are included in the Intel 82801 I/O Controller
@@ -1247,6 +1313,14 @@ config BCM_KONA_WDT_DEBUG
If in doubt, say 'N'.
+config BCM7038_WDT
+ tristate "BCM7038 Watchdog"
+ select WATCHDOG_CORE
+ help
+ Watchdog driver for the built-in hardware in Broadcom 7038 SoCs.
+
+ Say 'Y or 'M' here to enable the driver.
+
config IMGPDC_WDT
tristate "Imagination Technologies PDC Watchdog Timer"
depends on HAS_IOMEM
@@ -1289,7 +1363,7 @@ config MPC5200_WDT
config 8xxx_WDT
tristate "MPC8xxx Platform Watchdog Timer"
- depends on PPC_8xx || PPC_83xx || PPC_86xx
+ depends on PPC_8xx || PPC_83xx || PPC_86xx || PPC_MPC512x
select WATCHDOG_CORE
help
This driver is for a SoC level watchdog that exists on some
@@ -1343,7 +1417,7 @@ config BOOKE_WDT_DEFAULT_TIMEOUT
config MEN_A21_WDT
tristate "MEN A21 VME CPU Carrier Board Watchdog Timer"
select WATCHDOG_CORE
- depends on GPIOLIB
+ depends on GPIOLIB || COMPILE_TEST
help
Watchdog driver for MEN A21 VMEbus CPU Carrier Boards.