diff options
Diffstat (limited to 'kernel/drivers/w1/w1_io.c')
| -rw-r--r-- | kernel/drivers/w1/w1_io.c | 464 |
1 files changed, 464 insertions, 0 deletions
diff --git a/kernel/drivers/w1/w1_io.c b/kernel/drivers/w1/w1_io.c new file mode 100644 index 000000000..282092421 --- /dev/null +++ b/kernel/drivers/w1/w1_io.c @@ -0,0 +1,464 @@ +/* + * w1_io.c + * + * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <asm/io.h> + +#include <linux/delay.h> +#include <linux/moduleparam.h> +#include <linux/module.h> + +#include "w1.h" +#include "w1_log.h" + +static int w1_delay_parm = 1; +module_param_named(delay_coef, w1_delay_parm, int, 0); + +static int w1_disable_irqs = 0; +module_param_named(disable_irqs, w1_disable_irqs, int, 0); + +static u8 w1_crc8_table[] = { + 0, 94, 188, 226, 97, 63, 221, 131, 194, 156, 126, 32, 163, 253, 31, 65, + 157, 195, 33, 127, 252, 162, 64, 30, 95, 1, 227, 189, 62, 96, 130, 220, + 35, 125, 159, 193, 66, 28, 254, 160, 225, 191, 93, 3, 128, 222, 60, 98, + 190, 224, 2, 92, 223, 129, 99, 61, 124, 34, 192, 158, 29, 67, 161, 255, + 70, 24, 250, 164, 39, 121, 155, 197, 132, 218, 56, 102, 229, 187, 89, 7, + 219, 133, 103, 57, 186, 228, 6, 88, 25, 71, 165, 251, 120, 38, 196, 154, + 101, 59, 217, 135, 4, 90, 184, 230, 167, 249, 27, 69, 198, 152, 122, 36, + 248, 166, 68, 26, 153, 199, 37, 123, 58, 100, 134, 216, 91, 5, 231, 185, + 140, 210, 48, 110, 237, 179, 81, 15, 78, 16, 242, 172, 47, 113, 147, 205, + 17, 79, 173, 243, 112, 46, 204, 146, 211, 141, 111, 49, 178, 236, 14, 80, + 175, 241, 19, 77, 206, 144, 114, 44, 109, 51, 209, 143, 12, 82, 176, 238, + 50, 108, 142, 208, 83, 13, 239, 177, 240, 174, 76, 18, 145, 207, 45, 115, + 202, 148, 118, 40, 171, 245, 23, 73, 8, 86, 180, 234, 105, 55, 213, 139, + 87, 9, 235, 181, 54, 104, 138, 212, 149, 203, 41, 119, 244, 170, 72, 22, + 233, 183, 85, 11, 136, 214, 52, 106, 43, 117, 151, 201, 74, 20, 246, 168, + 116, 42, 200, 150, 21, 75, 169, 247, 182, 232, 10, 84, 215, 137, 107, 53 +}; + +static void w1_delay(unsigned long tm) +{ + udelay(tm * w1_delay_parm); +} + +static void w1_write_bit(struct w1_master *dev, int bit); +static u8 w1_read_bit(struct w1_master *dev); + +/** + * w1_touch_bit() - Generates a write-0 or write-1 cycle and samples the level. + * @dev: the master device + * @bit: 0 - write a 0, 1 - write a 0 read the level + */ +static u8 w1_touch_bit(struct w1_master *dev, int bit) +{ + if (dev->bus_master->touch_bit) + return dev->bus_master->touch_bit(dev->bus_master->data, bit); + else if (bit) + return w1_read_bit(dev); + else { + w1_write_bit(dev, 0); + return 0; + } +} + +/** + * w1_write_bit() - Generates a write-0 or write-1 cycle. + * @dev: the master device + * @bit: bit to write + * + * Only call if dev->bus_master->touch_bit is NULL + */ +static void w1_write_bit(struct w1_master *dev, int bit) +{ + unsigned long flags = 0; + + if(w1_disable_irqs) local_irq_save(flags); + + if (bit) { + dev->bus_master->write_bit(dev->bus_master->data, 0); + w1_delay(6); + dev->bus_master->write_bit(dev->bus_master->data, 1); + w1_delay(64); + } else { + dev->bus_master->write_bit(dev->bus_master->data, 0); + w1_delay(60); + dev->bus_master->write_bit(dev->bus_master->data, 1); + w1_delay(10); + } + + if(w1_disable_irqs) local_irq_restore(flags); +} + +/** + * w1_pre_write() - pre-write operations + * @dev: the master device + * + * Pre-write operation, currently only supporting strong pullups. + * Program the hardware for a strong pullup, if one has been requested and + * the hardware supports it. + */ +static void w1_pre_write(struct w1_master *dev) +{ + if (dev->pullup_duration && + dev->enable_pullup && dev->bus_master->set_pullup) { + dev->bus_master->set_pullup(dev->bus_master->data, + dev->pullup_duration); + } +} + +/** + * w1_post_write() - post-write options + * @dev: the master device + * + * Post-write operation, currently only supporting strong pullups. + * If a strong pullup was requested, clear it if the hardware supports + * them, or execute the delay otherwise, in either case clear the request. + */ +static void w1_post_write(struct w1_master *dev) +{ + if (dev->pullup_duration) { + if (dev->enable_pullup && dev->bus_master->set_pullup) + dev->bus_master->set_pullup(dev->bus_master->data, 0); + else + msleep(dev->pullup_duration); + dev->pullup_duration = 0; + } +} + +/** + * w1_write_8() - Writes 8 bits. + * @dev: the master device + * @byte: the byte to write + */ +void w1_write_8(struct w1_master *dev, u8 byte) +{ + int i; + + if (dev->bus_master->write_byte) { + w1_pre_write(dev); + dev->bus_master->write_byte(dev->bus_master->data, byte); + } + else + for (i = 0; i < 8; ++i) { + if (i == 7) + w1_pre_write(dev); + w1_touch_bit(dev, (byte >> i) & 0x1); + } + w1_post_write(dev); +} +EXPORT_SYMBOL_GPL(w1_write_8); + + +/** + * w1_read_bit() - Generates a write-1 cycle and samples the level. + * @dev: the master device + * + * Only call if dev->bus_master->touch_bit is NULL + */ +static u8 w1_read_bit(struct w1_master *dev) +{ + int result; + unsigned long flags = 0; + + /* sample timing is critical here */ + local_irq_save(flags); + dev->bus_master->write_bit(dev->bus_master->data, 0); + w1_delay(6); + dev->bus_master->write_bit(dev->bus_master->data, 1); + w1_delay(9); + + result = dev->bus_master->read_bit(dev->bus_master->data); + local_irq_restore(flags); + + w1_delay(55); + + return result & 0x1; +} + +/** + * w1_triplet() - * Does a triplet - used for searching ROM addresses. + * @dev: the master device + * @bdir: the bit to write if both id_bit and comp_bit are 0 + * + * Return bits: + * bit 0 = id_bit + * bit 1 = comp_bit + * bit 2 = dir_taken + * If both bits 0 & 1 are set, the search should be restarted. + * + * Return: bit fields - see above + */ +u8 w1_triplet(struct w1_master *dev, int bdir) +{ + if (dev->bus_master->triplet) + return dev->bus_master->triplet(dev->bus_master->data, bdir); + else { + u8 id_bit = w1_touch_bit(dev, 1); + u8 comp_bit = w1_touch_bit(dev, 1); + u8 retval; + + if (id_bit && comp_bit) + return 0x03; /* error */ + + if (!id_bit && !comp_bit) { + /* Both bits are valid, take the direction given */ + retval = bdir ? 0x04 : 0; + } else { + /* Only one bit is valid, take that direction */ + bdir = id_bit; + retval = id_bit ? 0x05 : 0x02; + } + + if (dev->bus_master->touch_bit) + w1_touch_bit(dev, bdir); + else + w1_write_bit(dev, bdir); + return retval; + } +} + +/** + * w1_read_8() - Reads 8 bits. + * @dev: the master device + * + * Return: the byte read + */ +u8 w1_read_8(struct w1_master *dev) +{ + int i; + u8 res = 0; + + if (dev->bus_master->read_byte) + res = dev->bus_master->read_byte(dev->bus_master->data); + else + for (i = 0; i < 8; ++i) + res |= (w1_touch_bit(dev,1) << i); + + return res; +} +EXPORT_SYMBOL_GPL(w1_read_8); + +/** + * w1_write_block() - Writes a series of bytes. + * @dev: the master device + * @buf: pointer to the data to write + * @len: the number of bytes to write + */ +void w1_write_block(struct w1_master *dev, const u8 *buf, int len) +{ + int i; + + if (dev->bus_master->write_block) { + w1_pre_write(dev); + dev->bus_master->write_block(dev->bus_master->data, buf, len); + } + else + for (i = 0; i < len; ++i) + w1_write_8(dev, buf[i]); /* calls w1_pre_write */ + w1_post_write(dev); +} +EXPORT_SYMBOL_GPL(w1_write_block); + +/** + * w1_touch_block() - Touches a series of bytes. + * @dev: the master device + * @buf: pointer to the data to write + * @len: the number of bytes to write + */ +void w1_touch_block(struct w1_master *dev, u8 *buf, int len) +{ + int i, j; + u8 tmp; + + for (i = 0; i < len; ++i) { + tmp = 0; + for (j = 0; j < 8; ++j) { + if (j == 7) + w1_pre_write(dev); + tmp |= w1_touch_bit(dev, (buf[i] >> j) & 0x1) << j; + } + + buf[i] = tmp; + } +} +EXPORT_SYMBOL_GPL(w1_touch_block); + +/** + * w1_read_block() - Reads a series of bytes. + * @dev: the master device + * @buf: pointer to the buffer to fill + * @len: the number of bytes to read + * Return: the number of bytes read + */ +u8 w1_read_block(struct w1_master *dev, u8 *buf, int len) +{ + int i; + u8 ret; + + if (dev->bus_master->read_block) + ret = dev->bus_master->read_block(dev->bus_master->data, buf, len); + else { + for (i = 0; i < len; ++i) + buf[i] = w1_read_8(dev); + ret = len; + } + + return ret; +} +EXPORT_SYMBOL_GPL(w1_read_block); + +/** + * w1_reset_bus() - Issues a reset bus sequence. + * @dev: the master device + * Return: 0=Device present, 1=No device present or error + */ +int w1_reset_bus(struct w1_master *dev) +{ + int result; + unsigned long flags = 0; + + if(w1_disable_irqs) local_irq_save(flags); + + if (dev->bus_master->reset_bus) + result = dev->bus_master->reset_bus(dev->bus_master->data) & 0x1; + else { + dev->bus_master->write_bit(dev->bus_master->data, 0); + /* minimum 480, max ? us + * be nice and sleep, except 18b20 spec lists 960us maximum, + * so until we can sleep with microsecond accuracy, spin. + * Feel free to come up with some other way to give up the + * cpu for such a short amount of time AND get it back in + * the maximum amount of time. + */ + w1_delay(500); + dev->bus_master->write_bit(dev->bus_master->data, 1); + w1_delay(70); + + result = dev->bus_master->read_bit(dev->bus_master->data) & 0x1; + /* minmum 70 (above) + 430 = 500 us + * There aren't any timing requirements between a reset and + * the following transactions. Sleeping is safe here. + */ + /* w1_delay(430); min required time */ + msleep(1); + } + + if(w1_disable_irqs) local_irq_restore(flags); + + return result; +} +EXPORT_SYMBOL_GPL(w1_reset_bus); + +u8 w1_calc_crc8(u8 * data, int len) +{ + u8 crc = 0; + + while (len--) + crc = w1_crc8_table[crc ^ *data++]; + + return crc; +} +EXPORT_SYMBOL_GPL(w1_calc_crc8); + +void w1_search_devices(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb) +{ + dev->attempts++; + if (dev->bus_master->search) + dev->bus_master->search(dev->bus_master->data, dev, + search_type, cb); + else + w1_search(dev, search_type, cb); +} + +/** + * w1_reset_select_slave() - reset and select a slave + * @sl: the slave to select + * + * Resets the bus and then selects the slave by sending either a skip rom + * or a rom match. A skip rom is issued if there is only one device + * registered on the bus. + * The w1 master lock must be held. + * + * Return: 0=success, anything else=error + */ +int w1_reset_select_slave(struct w1_slave *sl) +{ + if (w1_reset_bus(sl->master)) + return -1; + + if (sl->master->slave_count == 1) + w1_write_8(sl->master, W1_SKIP_ROM); + else { + u8 match[9] = {W1_MATCH_ROM, }; + u64 rn = le64_to_cpu(*((u64*)&sl->reg_num)); + + memcpy(&match[1], &rn, 8); + w1_write_block(sl->master, match, 9); + } + return 0; +} +EXPORT_SYMBOL_GPL(w1_reset_select_slave); + +/** + * w1_reset_resume_command() - resume instead of another match ROM + * @dev: the master device + * + * When the workflow with a slave amongst many requires several + * successive commands a reset between each, this function is similar + * to doing a reset then a match ROM for the last matched ROM. The + * advantage being that the matched ROM step is skipped in favor of the + * resume command. The slave must support the command of course. + * + * If the bus has only one slave, traditionnaly the match ROM is skipped + * and a "SKIP ROM" is done for efficiency. On multi-slave busses, this + * doesn't work of course, but the resume command is the next best thing. + * + * The w1 master lock must be held. + */ +int w1_reset_resume_command(struct w1_master *dev) +{ + if (w1_reset_bus(dev)) + return -1; + + /* This will make only the last matched slave perform a skip ROM. */ + w1_write_8(dev, W1_RESUME_CMD); + return 0; +} +EXPORT_SYMBOL_GPL(w1_reset_resume_command); + +/** + * w1_next_pullup() - register for a strong pullup + * @dev: the master device + * @delay: time in milliseconds + * + * Put out a strong pull-up of the specified duration after the next write + * operation. Not all hardware supports strong pullups. Hardware that + * doesn't support strong pullups will sleep for the given time after the + * write operation without a strong pullup. This is a one shot request for + * the next write, specifying zero will clear a previous request. + * The w1 master lock must be held. + * + * Return: 0=success, anything else=error + */ +void w1_next_pullup(struct w1_master *dev, int delay) +{ + dev->pullup_duration = delay; +} +EXPORT_SYMBOL_GPL(w1_next_pullup); |