diff options
Diffstat (limited to 'kernel/drivers/w1/masters/ds2490.c')
| -rw-r--r-- | kernel/drivers/w1/masters/ds2490.c | 1090 |
1 files changed, 1090 insertions, 0 deletions
diff --git a/kernel/drivers/w1/masters/ds2490.c b/kernel/drivers/w1/masters/ds2490.c new file mode 100644 index 000000000..049a884a7 --- /dev/null +++ b/kernel/drivers/w1/masters/ds2490.c @@ -0,0 +1,1090 @@ +/* + * ds2490.c USB to one wire bridge + * + * Copyright (c) 2004 Evgeniy Polyakov <zbr@ioremap.net> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/usb.h> +#include <linux/slab.h> + +#include "../w1_int.h" +#include "../w1.h" + +/* USB Standard */ +/* USB Control request vendor type */ +#define VENDOR 0x40 + +/* COMMAND TYPE CODES */ +#define CONTROL_CMD 0x00 +#define COMM_CMD 0x01 +#define MODE_CMD 0x02 + +/* CONTROL COMMAND CODES */ +#define CTL_RESET_DEVICE 0x0000 +#define CTL_START_EXE 0x0001 +#define CTL_RESUME_EXE 0x0002 +#define CTL_HALT_EXE_IDLE 0x0003 +#define CTL_HALT_EXE_DONE 0x0004 +#define CTL_FLUSH_COMM_CMDS 0x0007 +#define CTL_FLUSH_RCV_BUFFER 0x0008 +#define CTL_FLUSH_XMT_BUFFER 0x0009 +#define CTL_GET_COMM_CMDS 0x000A + +/* MODE COMMAND CODES */ +#define MOD_PULSE_EN 0x0000 +#define MOD_SPEED_CHANGE_EN 0x0001 +#define MOD_1WIRE_SPEED 0x0002 +#define MOD_STRONG_PU_DURATION 0x0003 +#define MOD_PULLDOWN_SLEWRATE 0x0004 +#define MOD_PROG_PULSE_DURATION 0x0005 +#define MOD_WRITE1_LOWTIME 0x0006 +#define MOD_DSOW0_TREC 0x0007 + +/* COMMUNICATION COMMAND CODES */ +#define COMM_ERROR_ESCAPE 0x0601 +#define COMM_SET_DURATION 0x0012 +#define COMM_BIT_IO 0x0020 +#define COMM_PULSE 0x0030 +#define COMM_1_WIRE_RESET 0x0042 +#define COMM_BYTE_IO 0x0052 +#define COMM_MATCH_ACCESS 0x0064 +#define COMM_BLOCK_IO 0x0074 +#define COMM_READ_STRAIGHT 0x0080 +#define COMM_DO_RELEASE 0x6092 +#define COMM_SET_PATH 0x00A2 +#define COMM_WRITE_SRAM_PAGE 0x00B2 +#define COMM_WRITE_EPROM 0x00C4 +#define COMM_READ_CRC_PROT_PAGE 0x00D4 +#define COMM_READ_REDIRECT_PAGE_CRC 0x21E4 +#define COMM_SEARCH_ACCESS 0x00F4 + +/* Communication command bits */ +#define COMM_TYPE 0x0008 +#define COMM_SE 0x0008 +#define COMM_D 0x0008 +#define COMM_Z 0x0008 +#define COMM_CH 0x0008 +#define COMM_SM 0x0008 +#define COMM_R 0x0008 +#define COMM_IM 0x0001 + +#define COMM_PS 0x4000 +#define COMM_PST 0x4000 +#define COMM_CIB 0x4000 +#define COMM_RTS 0x4000 +#define COMM_DT 0x2000 +#define COMM_SPU 0x1000 +#define COMM_F 0x0800 +#define COMM_NTF 0x0400 +#define COMM_ICP 0x0200 +#define COMM_RST 0x0100 + +#define PULSE_PROG 0x01 +#define PULSE_SPUE 0x02 + +#define BRANCH_MAIN 0xCC +#define BRANCH_AUX 0x33 + +/* Status flags */ +#define ST_SPUA 0x01 /* Strong Pull-up is active */ +#define ST_PRGA 0x02 /* 12V programming pulse is being generated */ +#define ST_12VP 0x04 /* external 12V programming voltage is present */ +#define ST_PMOD 0x08 /* DS2490 powered from USB and external sources */ +#define ST_HALT 0x10 /* DS2490 is currently halted */ +#define ST_IDLE 0x20 /* DS2490 is currently idle */ +#define ST_EPOF 0x80 +/* Status transfer size, 16 bytes status, 16 byte result flags */ +#define ST_SIZE 0x20 + +/* Result Register flags */ +#define RR_DETECT 0xA5 /* New device detected */ +#define RR_NRS 0x01 /* Reset no presence or ... */ +#define RR_SH 0x02 /* short on reset or set path */ +#define RR_APP 0x04 /* alarming presence on reset */ +#define RR_VPP 0x08 /* 12V expected not seen */ +#define RR_CMP 0x10 /* compare error */ +#define RR_CRC 0x20 /* CRC error detected */ +#define RR_RDP 0x40 /* redirected page */ +#define RR_EOS 0x80 /* end of search error */ + +#define SPEED_NORMAL 0x00 +#define SPEED_FLEXIBLE 0x01 +#define SPEED_OVERDRIVE 0x02 + +#define NUM_EP 4 +#define EP_CONTROL 0 +#define EP_STATUS 1 +#define EP_DATA_OUT 2 +#define EP_DATA_IN 3 + +struct ds_device +{ + struct list_head ds_entry; + + struct usb_device *udev; + struct usb_interface *intf; + + int ep[NUM_EP]; + + /* Strong PullUp + * 0: pullup not active, else duration in milliseconds + */ + int spu_sleep; + /* spu_bit contains COMM_SPU or 0 depending on if the strong pullup + * should be active or not for writes. + */ + u16 spu_bit; + + struct w1_bus_master master; +}; + +struct ds_status +{ + u8 enable; + u8 speed; + u8 pullup_dur; + u8 ppuls_dur; + u8 pulldown_slew; + u8 write1_time; + u8 write0_time; + u8 reserved0; + u8 status; + u8 command0; + u8 command1; + u8 command_buffer_status; + u8 data_out_buffer_status; + u8 data_in_buffer_status; + u8 reserved1; + u8 reserved2; + +}; + +static struct usb_device_id ds_id_table [] = { + { USB_DEVICE(0x04fa, 0x2490) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, ds_id_table); + +static int ds_probe(struct usb_interface *, const struct usb_device_id *); +static void ds_disconnect(struct usb_interface *); + +static int ds_send_control(struct ds_device *, u16, u16); +static int ds_send_control_cmd(struct ds_device *, u16, u16); + +static LIST_HEAD(ds_devices); +static DEFINE_MUTEX(ds_mutex); + +static struct usb_driver ds_driver = { + .name = "DS9490R", + .probe = ds_probe, + .disconnect = ds_disconnect, + .id_table = ds_id_table, +}; + +static int ds_send_control_cmd(struct ds_device *dev, u16 value, u16 index) +{ + int err; + + err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]), + CONTROL_CMD, VENDOR, value, index, NULL, 0, 1000); + if (err < 0) { + pr_err("Failed to send command control message %x.%x: err=%d.\n", + value, index, err); + return err; + } + + return err; +} + +static int ds_send_control_mode(struct ds_device *dev, u16 value, u16 index) +{ + int err; + + err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]), + MODE_CMD, VENDOR, value, index, NULL, 0, 1000); + if (err < 0) { + pr_err("Failed to send mode control message %x.%x: err=%d.\n", + value, index, err); + return err; + } + + return err; +} + +static int ds_send_control(struct ds_device *dev, u16 value, u16 index) +{ + int err; + + err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]), + COMM_CMD, VENDOR, value, index, NULL, 0, 1000); + if (err < 0) { + pr_err("Failed to send control message %x.%x: err=%d.\n", + value, index, err); + return err; + } + + return err; +} + +static int ds_recv_status_nodump(struct ds_device *dev, struct ds_status *st, + unsigned char *buf, int size) +{ + int count, err; + + memset(st, 0, sizeof(*st)); + + count = 0; + err = usb_interrupt_msg(dev->udev, usb_rcvintpipe(dev->udev, + dev->ep[EP_STATUS]), buf, size, &count, 1000); + if (err < 0) { + pr_err("Failed to read 1-wire data from 0x%x: err=%d.\n", + dev->ep[EP_STATUS], err); + return err; + } + + if (count >= sizeof(*st)) + memcpy(st, buf, sizeof(*st)); + + return count; +} + +static inline void ds_print_msg(unsigned char *buf, unsigned char *str, int off) +{ + pr_info("%45s: %8x\n", str, buf[off]); +} + +static void ds_dump_status(struct ds_device *dev, unsigned char *buf, int count) +{ + int i; + + pr_info("0x%x: count=%d, status: ", dev->ep[EP_STATUS], count); + for (i=0; i<count; ++i) + pr_info("%02x ", buf[i]); + pr_info("\n"); + + if (count >= 16) { + ds_print_msg(buf, "enable flag", 0); + ds_print_msg(buf, "1-wire speed", 1); + ds_print_msg(buf, "strong pullup duration", 2); + ds_print_msg(buf, "programming pulse duration", 3); + ds_print_msg(buf, "pulldown slew rate control", 4); + ds_print_msg(buf, "write-1 low time", 5); + ds_print_msg(buf, "data sample offset/write-0 recovery time", + 6); + ds_print_msg(buf, "reserved (test register)", 7); + ds_print_msg(buf, "device status flags", 8); + ds_print_msg(buf, "communication command byte 1", 9); + ds_print_msg(buf, "communication command byte 2", 10); + ds_print_msg(buf, "communication command buffer status", 11); + ds_print_msg(buf, "1-wire data output buffer status", 12); + ds_print_msg(buf, "1-wire data input buffer status", 13); + ds_print_msg(buf, "reserved", 14); + ds_print_msg(buf, "reserved", 15); + } + for (i = 16; i < count; ++i) { + if (buf[i] == RR_DETECT) { + ds_print_msg(buf, "new device detect", i); + continue; + } + ds_print_msg(buf, "Result Register Value: ", i); + if (buf[i] & RR_NRS) + pr_info("NRS: Reset no presence or ...\n"); + if (buf[i] & RR_SH) + pr_info("SH: short on reset or set path\n"); + if (buf[i] & RR_APP) + pr_info("APP: alarming presence on reset\n"); + if (buf[i] & RR_VPP) + pr_info("VPP: 12V expected not seen\n"); + if (buf[i] & RR_CMP) + pr_info("CMP: compare error\n"); + if (buf[i] & RR_CRC) + pr_info("CRC: CRC error detected\n"); + if (buf[i] & RR_RDP) + pr_info("RDP: redirected page\n"); + if (buf[i] & RR_EOS) + pr_info("EOS: end of search error\n"); + } +} + +static void ds_reset_device(struct ds_device *dev) +{ + ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0); + /* Always allow strong pullup which allow individual writes to use + * the strong pullup. + */ + if (ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_SPUE)) + pr_err("ds_reset_device: Error allowing strong pullup\n"); + /* Chip strong pullup time was cleared. */ + if (dev->spu_sleep) { + /* lower 4 bits are 0, see ds_set_pullup */ + u8 del = dev->spu_sleep>>4; + if (ds_send_control(dev, COMM_SET_DURATION | COMM_IM, del)) + pr_err("ds_reset_device: Error setting duration\n"); + } +} + +static int ds_recv_data(struct ds_device *dev, unsigned char *buf, int size) +{ + int count, err; + struct ds_status st; + + /* Careful on size. If size is less than what is available in + * the input buffer, the device fails the bulk transfer and + * clears the input buffer. It could read the maximum size of + * the data buffer, but then do you return the first, last, or + * some set of the middle size bytes? As long as the rest of + * the code is correct there will be size bytes waiting. A + * call to ds_wait_status will wait until the device is idle + * and any data to be received would have been available. + */ + count = 0; + err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN]), + buf, size, &count, 1000); + if (err < 0) { + u8 buf[ST_SIZE]; + int count; + + pr_info("Clearing ep0x%x.\n", dev->ep[EP_DATA_IN]); + usb_clear_halt(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN])); + + count = ds_recv_status_nodump(dev, &st, buf, sizeof(buf)); + ds_dump_status(dev, buf, count); + return err; + } + +#if 0 + { + int i; + + printk("%s: count=%d: ", __func__, count); + for (i=0; i<count; ++i) + printk("%02x ", buf[i]); + printk("\n"); + } +#endif + return count; +} + +static int ds_send_data(struct ds_device *dev, unsigned char *buf, int len) +{ + int count, err; + + count = 0; + err = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, dev->ep[EP_DATA_OUT]), buf, len, &count, 1000); + if (err < 0) { + pr_err("Failed to write 1-wire data to ep0x%x: " + "err=%d.\n", dev->ep[EP_DATA_OUT], err); + return err; + } + + return err; +} + +#if 0 + +int ds_stop_pulse(struct ds_device *dev, int limit) +{ + struct ds_status st; + int count = 0, err = 0; + u8 buf[ST_SIZE]; + + do { + err = ds_send_control(dev, CTL_HALT_EXE_IDLE, 0); + if (err) + break; + err = ds_send_control(dev, CTL_RESUME_EXE, 0); + if (err) + break; + err = ds_recv_status_nodump(dev, &st, buf, sizeof(buf)); + if (err) + break; + + if ((st.status & ST_SPUA) == 0) { + err = ds_send_control_mode(dev, MOD_PULSE_EN, 0); + if (err) + break; + } + } while(++count < limit); + + return err; +} + +int ds_detect(struct ds_device *dev, struct ds_status *st) +{ + int err; + + err = ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0); + if (err) + return err; + + err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM, 0); + if (err) + return err; + + err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM | COMM_TYPE, 0x40); + if (err) + return err; + + err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_PROG); + if (err) + return err; + + err = ds_dump_status(dev, st); + + return err; +} + +#endif /* 0 */ + +static int ds_wait_status(struct ds_device *dev, struct ds_status *st) +{ + u8 buf[ST_SIZE]; + int err, count = 0; + + do { + st->status = 0; + err = ds_recv_status_nodump(dev, st, buf, sizeof(buf)); +#if 0 + if (err >= 0) { + int i; + printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], err); + for (i=0; i<err; ++i) + printk("%02x ", buf[i]); + printk("\n"); + } +#endif + } while (!(st->status & ST_IDLE) && !(err < 0) && ++count < 100); + + if (err >= 16 && st->status & ST_EPOF) { + pr_info("Resetting device after ST_EPOF.\n"); + ds_reset_device(dev); + /* Always dump the device status. */ + count = 101; + } + + /* Dump the status for errors or if there is extended return data. + * The extended status includes new device detection (maybe someone + * can do something with it). + */ + if (err > 16 || count >= 100 || err < 0) + ds_dump_status(dev, buf, err); + + /* Extended data isn't an error. Well, a short is, but the dump + * would have already told the user that and we can't do anything + * about it in software anyway. + */ + if (count >= 100 || err < 0) + return -1; + else + return 0; +} + +static int ds_reset(struct ds_device *dev) +{ + int err; + + /* Other potentionally interesting flags for reset. + * + * COMM_NTF: Return result register feedback. This could be used to + * detect some conditions such as short, alarming presence, or + * detect if a new device was detected. + * + * COMM_SE which allows SPEED_NORMAL, SPEED_FLEXIBLE, SPEED_OVERDRIVE: + * Select the data transfer rate. + */ + err = ds_send_control(dev, COMM_1_WIRE_RESET | COMM_IM, SPEED_NORMAL); + if (err) + return err; + + return 0; +} + +#if 0 +static int ds_set_speed(struct ds_device *dev, int speed) +{ + int err; + + if (speed != SPEED_NORMAL && speed != SPEED_FLEXIBLE && speed != SPEED_OVERDRIVE) + return -EINVAL; + + if (speed != SPEED_OVERDRIVE) + speed = SPEED_FLEXIBLE; + + speed &= 0xff; + + err = ds_send_control_mode(dev, MOD_1WIRE_SPEED, speed); + if (err) + return err; + + return err; +} +#endif /* 0 */ + +static int ds_set_pullup(struct ds_device *dev, int delay) +{ + int err = 0; + u8 del = 1 + (u8)(delay >> 4); + /* Just storing delay would not get the trunication and roundup. */ + int ms = del<<4; + + /* Enable spu_bit if a delay is set. */ + dev->spu_bit = delay ? COMM_SPU : 0; + /* If delay is zero, it has already been disabled, if the time is + * the same as the hardware was last programmed to, there is also + * nothing more to do. Compare with the recalculated value ms + * rather than del or delay which can have a different value. + */ + if (delay == 0 || ms == dev->spu_sleep) + return err; + + err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM, del); + if (err) + return err; + + dev->spu_sleep = ms; + + return err; +} + +static int ds_touch_bit(struct ds_device *dev, u8 bit, u8 *tbit) +{ + int err; + struct ds_status st; + + err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | (bit ? COMM_D : 0), + 0); + if (err) + return err; + + ds_wait_status(dev, &st); + + err = ds_recv_data(dev, tbit, sizeof(*tbit)); + if (err < 0) + return err; + + return 0; +} + +#if 0 +static int ds_write_bit(struct ds_device *dev, u8 bit) +{ + int err; + struct ds_status st; + + /* Set COMM_ICP to write without a readback. Note, this will + * produce one time slot, a down followed by an up with COMM_D + * only determing the timing. + */ + err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | COMM_ICP | + (bit ? COMM_D : 0), 0); + if (err) + return err; + + ds_wait_status(dev, &st); + + return 0; +} +#endif + +static int ds_write_byte(struct ds_device *dev, u8 byte) +{ + int err; + struct ds_status st; + u8 rbyte; + + err = ds_send_control(dev, COMM_BYTE_IO | COMM_IM | dev->spu_bit, byte); + if (err) + return err; + + if (dev->spu_bit) + msleep(dev->spu_sleep); + + err = ds_wait_status(dev, &st); + if (err) + return err; + + err = ds_recv_data(dev, &rbyte, sizeof(rbyte)); + if (err < 0) + return err; + + return !(byte == rbyte); +} + +static int ds_read_byte(struct ds_device *dev, u8 *byte) +{ + int err; + struct ds_status st; + + err = ds_send_control(dev, COMM_BYTE_IO | COMM_IM , 0xff); + if (err) + return err; + + ds_wait_status(dev, &st); + + err = ds_recv_data(dev, byte, sizeof(*byte)); + if (err < 0) + return err; + + return 0; +} + +static int ds_read_block(struct ds_device *dev, u8 *buf, int len) +{ + struct ds_status st; + int err; + + if (len > 64*1024) + return -E2BIG; + + memset(buf, 0xFF, len); + + err = ds_send_data(dev, buf, len); + if (err < 0) + return err; + + err = ds_send_control(dev, COMM_BLOCK_IO | COMM_IM, len); + if (err) + return err; + + ds_wait_status(dev, &st); + + memset(buf, 0x00, len); + err = ds_recv_data(dev, buf, len); + + return err; +} + +static int ds_write_block(struct ds_device *dev, u8 *buf, int len) +{ + int err; + struct ds_status st; + + err = ds_send_data(dev, buf, len); + if (err < 0) + return err; + + err = ds_send_control(dev, COMM_BLOCK_IO | COMM_IM | dev->spu_bit, len); + if (err) + return err; + + if (dev->spu_bit) + msleep(dev->spu_sleep); + + ds_wait_status(dev, &st); + + err = ds_recv_data(dev, buf, len); + if (err < 0) + return err; + + return !(err == len); +} + +static void ds9490r_search(void *data, struct w1_master *master, + u8 search_type, w1_slave_found_callback callback) +{ + /* When starting with an existing id, the first id returned will + * be that device (if it is still on the bus most likely). + * + * If the number of devices found is less than or equal to the + * search_limit, that number of IDs will be returned. If there are + * more, search_limit IDs will be returned followed by a non-zero + * discrepency value. + */ + struct ds_device *dev = data; + int err; + u16 value, index; + struct ds_status st; + u8 st_buf[ST_SIZE]; + int search_limit; + int found = 0; + int i; + + /* DS18b20 spec, 13.16 ms per device, 75 per second, sleep for + * discovering 8 devices (1 bulk transfer and 1/2 FIFO size) at a time. + */ + const unsigned long jtime = msecs_to_jiffies(1000*8/75); + /* FIFO 128 bytes, bulk packet size 64, read a multiple of the + * packet size. + */ + u64 buf[2*64/8]; + + mutex_lock(&master->bus_mutex); + + /* address to start searching at */ + if (ds_send_data(dev, (u8 *)&master->search_id, 8) < 0) + goto search_out; + master->search_id = 0; + + value = COMM_SEARCH_ACCESS | COMM_IM | COMM_RST | COMM_SM | COMM_F | + COMM_RTS; + search_limit = master->max_slave_count; + if (search_limit > 255) + search_limit = 0; + index = search_type | (search_limit << 8); + if (ds_send_control(dev, value, index) < 0) + goto search_out; + + do { + schedule_timeout(jtime); + + if (ds_recv_status_nodump(dev, &st, st_buf, sizeof(st_buf)) < + sizeof(st)) { + break; + } + + if (st.data_in_buffer_status) { + /* Bulk in can receive partial ids, but when it does + * they fail crc and will be discarded anyway. + * That has only been seen when status in buffer + * is 0 and bulk is read anyway, so don't read + * bulk without first checking if status says there + * is data to read. + */ + err = ds_recv_data(dev, (u8 *)buf, sizeof(buf)); + if (err < 0) + break; + for (i = 0; i < err/8; ++i) { + ++found; + if (found <= search_limit) + callback(master, buf[i]); + /* can't know if there will be a discrepancy + * value after until the next id */ + if (found == search_limit) + master->search_id = buf[i]; + } + } + + if (test_bit(W1_ABORT_SEARCH, &master->flags)) + break; + } while (!(st.status & (ST_IDLE | ST_HALT))); + + /* only continue the search if some weren't found */ + if (found <= search_limit) { + master->search_id = 0; + } else if (!test_bit(W1_WARN_MAX_COUNT, &master->flags)) { + /* Only max_slave_count will be scanned in a search, + * but it will start where it left off next search + * until all ids are identified and then it will start + * over. A continued search will report the previous + * last id as the first id (provided it is still on the + * bus). + */ + dev_info(&dev->udev->dev, "%s: max_slave_count %d reached, " + "will continue next search.\n", __func__, + master->max_slave_count); + set_bit(W1_WARN_MAX_COUNT, &master->flags); + } +search_out: + mutex_unlock(&master->bus_mutex); +} + +#if 0 +static int ds_match_access(struct ds_device *dev, u64 init) +{ + int err; + struct ds_status st; + + err = ds_send_data(dev, (unsigned char *)&init, sizeof(init)); + if (err) + return err; + + ds_wait_status(dev, &st); + + err = ds_send_control(dev, COMM_MATCH_ACCESS | COMM_IM | COMM_RST, 0x0055); + if (err) + return err; + + ds_wait_status(dev, &st); + + return 0; +} + +static int ds_set_path(struct ds_device *dev, u64 init) +{ + int err; + struct ds_status st; + u8 buf[9]; + + memcpy(buf, &init, 8); + buf[8] = BRANCH_MAIN; + + err = ds_send_data(dev, buf, sizeof(buf)); + if (err) + return err; + + ds_wait_status(dev, &st); + + err = ds_send_control(dev, COMM_SET_PATH | COMM_IM | COMM_RST, 0); + if (err) + return err; + + ds_wait_status(dev, &st); + + return 0; +} + +#endif /* 0 */ + +static u8 ds9490r_touch_bit(void *data, u8 bit) +{ + u8 ret; + struct ds_device *dev = data; + + if (ds_touch_bit(dev, bit, &ret)) + return 0; + + return ret; +} + +#if 0 +static void ds9490r_write_bit(void *data, u8 bit) +{ + struct ds_device *dev = data; + + ds_write_bit(dev, bit); +} + +static u8 ds9490r_read_bit(void *data) +{ + struct ds_device *dev = data; + int err; + u8 bit = 0; + + err = ds_touch_bit(dev, 1, &bit); + if (err) + return 0; + + return bit & 1; +} +#endif + +static void ds9490r_write_byte(void *data, u8 byte) +{ + struct ds_device *dev = data; + + ds_write_byte(dev, byte); +} + +static u8 ds9490r_read_byte(void *data) +{ + struct ds_device *dev = data; + int err; + u8 byte = 0; + + err = ds_read_byte(dev, &byte); + if (err) + return 0; + + return byte; +} + +static void ds9490r_write_block(void *data, const u8 *buf, int len) +{ + struct ds_device *dev = data; + + ds_write_block(dev, (u8 *)buf, len); +} + +static u8 ds9490r_read_block(void *data, u8 *buf, int len) +{ + struct ds_device *dev = data; + int err; + + err = ds_read_block(dev, buf, len); + if (err < 0) + return 0; + + return len; +} + +static u8 ds9490r_reset(void *data) +{ + struct ds_device *dev = data; + int err; + + err = ds_reset(dev); + if (err) + return 1; + + return 0; +} + +static u8 ds9490r_set_pullup(void *data, int delay) +{ + struct ds_device *dev = data; + + if (ds_set_pullup(dev, delay)) + return 1; + + return 0; +} + +static int ds_w1_init(struct ds_device *dev) +{ + memset(&dev->master, 0, sizeof(struct w1_bus_master)); + + /* Reset the device as it can be in a bad state. + * This is necessary because a block write will wait for data + * to be placed in the output buffer and block any later + * commands which will keep accumulating and the device will + * not be idle. Another case is removing the ds2490 module + * while a bus search is in progress, somehow a few commands + * get through, but the input transfers fail leaving data in + * the input buffer. This will cause the next read to fail + * see the note in ds_recv_data. + */ + ds_reset_device(dev); + + dev->master.data = dev; + dev->master.touch_bit = &ds9490r_touch_bit; + /* read_bit and write_bit in w1_bus_master are expected to set and + * sample the line level. For write_bit that means it is expected to + * set it to that value and leave it there. ds2490 only supports an + * individual time slot at the lowest level. The requirement from + * pulling the bus state down to reading the state is 15us, something + * that isn't realistic on the USB bus anyway. + dev->master.read_bit = &ds9490r_read_bit; + dev->master.write_bit = &ds9490r_write_bit; + */ + dev->master.read_byte = &ds9490r_read_byte; + dev->master.write_byte = &ds9490r_write_byte; + dev->master.read_block = &ds9490r_read_block; + dev->master.write_block = &ds9490r_write_block; + dev->master.reset_bus = &ds9490r_reset; + dev->master.set_pullup = &ds9490r_set_pullup; + dev->master.search = &ds9490r_search; + + return w1_add_master_device(&dev->master); +} + +static void ds_w1_fini(struct ds_device *dev) +{ + w1_remove_master_device(&dev->master); +} + +static int ds_probe(struct usb_interface *intf, + const struct usb_device_id *udev_id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct usb_endpoint_descriptor *endpoint; + struct usb_host_interface *iface_desc; + struct ds_device *dev; + int i, err, alt; + + dev = kzalloc(sizeof(struct ds_device), GFP_KERNEL); + if (!dev) { + pr_info("Failed to allocate new DS9490R structure.\n"); + return -ENOMEM; + } + dev->udev = usb_get_dev(udev); + if (!dev->udev) { + err = -ENOMEM; + goto err_out_free; + } + memset(dev->ep, 0, sizeof(dev->ep)); + + usb_set_intfdata(intf, dev); + + err = usb_reset_configuration(dev->udev); + if (err) { + dev_err(&dev->udev->dev, + "Failed to reset configuration: err=%d.\n", err); + goto err_out_clear; + } + + /* alternative 3, 1ms interrupt (greatly speeds search), 64 byte bulk */ + alt = 3; + err = usb_set_interface(dev->udev, + intf->altsetting[alt].desc.bInterfaceNumber, alt); + if (err) { + dev_err(&dev->udev->dev, "Failed to set alternative setting %d " + "for %d interface: err=%d.\n", alt, + intf->altsetting[alt].desc.bInterfaceNumber, err); + goto err_out_clear; + } + + iface_desc = &intf->altsetting[alt]; + if (iface_desc->desc.bNumEndpoints != NUM_EP-1) { + pr_info("Num endpoints=%d. It is not DS9490R.\n", + iface_desc->desc.bNumEndpoints); + err = -EINVAL; + goto err_out_clear; + } + + /* + * This loop doesn'd show control 0 endpoint, + * so we will fill only 1-3 endpoints entry. + */ + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + + dev->ep[i+1] = endpoint->bEndpointAddress; +#if 0 + printk("%d: addr=%x, size=%d, dir=%s, type=%x\n", + i, endpoint->bEndpointAddress, le16_to_cpu(endpoint->wMaxPacketSize), + (endpoint->bEndpointAddress & USB_DIR_IN)?"IN":"OUT", + endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); +#endif + } + + err = ds_w1_init(dev); + if (err) + goto err_out_clear; + + mutex_lock(&ds_mutex); + list_add_tail(&dev->ds_entry, &ds_devices); + mutex_unlock(&ds_mutex); + + return 0; + +err_out_clear: + usb_set_intfdata(intf, NULL); + usb_put_dev(dev->udev); +err_out_free: + kfree(dev); + return err; +} + +static void ds_disconnect(struct usb_interface *intf) +{ + struct ds_device *dev; + + dev = usb_get_intfdata(intf); + if (!dev) + return; + + mutex_lock(&ds_mutex); + list_del(&dev->ds_entry); + mutex_unlock(&ds_mutex); + + ds_w1_fini(dev); + + usb_set_intfdata(intf, NULL); + + usb_put_dev(dev->udev); + kfree(dev); +} + +module_usb_driver(ds_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>"); +MODULE_DESCRIPTION("DS2490 USB <-> W1 bus master driver (DS9490*)"); |