diff options
Diffstat (limited to 'kernel/drivers/usb')
99 files changed, 1556 insertions, 679 deletions
diff --git a/kernel/drivers/usb/chipidea/core.c b/kernel/drivers/usb/chipidea/core.c index 965d0e240..ba4a2a1eb 100644 --- a/kernel/drivers/usb/chipidea/core.c +++ b/kernel/drivers/usb/chipidea/core.c @@ -926,6 +926,7 @@ static int ci_hdrc_probe(struct platform_device *pdev) if (!ci) return -ENOMEM; + spin_lock_init(&ci->lock); ci->dev = dev; ci->platdata = dev_get_platdata(dev); ci->imx28_write_fix = !!(ci->platdata->flags & diff --git a/kernel/drivers/usb/chipidea/udc.c b/kernel/drivers/usb/chipidea/udc.c index 391a1225b..d8a045fc1 100644 --- a/kernel/drivers/usb/chipidea/udc.c +++ b/kernel/drivers/usb/chipidea/udc.c @@ -939,6 +939,15 @@ static int isr_setup_status_phase(struct ci_hdrc *ci) int retval; struct ci_hw_ep *hwep; + /* + * Unexpected USB controller behavior, caused by bad signal integrity + * or ground reference problems, can lead to isr_setup_status_phase + * being called with ci->status equal to NULL. + * If this situation occurs, you should review your USB hardware design. + */ + if (WARN_ON_ONCE(!ci->status)) + return -EPIPE; + hwep = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in; ci->status->context = ci; ci->status->complete = isr_setup_status_complete; @@ -1585,8 +1594,11 @@ static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on) { struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget); - /* Data+ pullup controlled by OTG state machine in OTG fsm mode */ - if (ci_otg_is_fsm_mode(ci)) + /* + * Data+ pullup controlled by OTG state machine in OTG fsm mode; + * and don't touch Data+ in host mode for dual role config. + */ + if (ci_otg_is_fsm_mode(ci) || ci->role == CI_ROLE_HOST) return 0; pm_runtime_get_sync(&ci->gadget.dev); @@ -1872,8 +1884,6 @@ static int udc_start(struct ci_hdrc *ci) struct usb_otg_caps *otg_caps = &ci->platdata->ci_otg_caps; int retval = 0; - spin_lock_init(&ci->lock); - ci->gadget.ops = &usb_gadget_ops; ci->gadget.speed = USB_SPEED_UNKNOWN; ci->gadget.max_speed = USB_SPEED_HIGH; diff --git a/kernel/drivers/usb/class/cdc-acm.c b/kernel/drivers/usb/class/cdc-acm.c index fa4e23930..96849e2e7 100644 --- a/kernel/drivers/usb/class/cdc-acm.c +++ b/kernel/drivers/usb/class/cdc-acm.c @@ -877,8 +877,6 @@ static int wait_serial_change(struct acm *acm, unsigned long arg) DECLARE_WAITQUEUE(wait, current); struct async_icount old, new; - if (arg & (TIOCM_DSR | TIOCM_RI | TIOCM_CD )) - return -EINVAL; do { spin_lock_irq(&acm->read_lock); old = acm->oldcount; @@ -1114,6 +1112,9 @@ static int acm_probe(struct usb_interface *intf, if (quirks == NO_UNION_NORMAL) { data_interface = usb_ifnum_to_if(usb_dev, 1); control_interface = usb_ifnum_to_if(usb_dev, 0); + /* we would crash */ + if (!data_interface || !control_interface) + return -ENODEV; goto skip_normal_probe; } @@ -1333,7 +1334,6 @@ made_compressed_probe: spin_lock_init(&acm->write_lock); spin_lock_init(&acm->read_lock); mutex_init(&acm->mutex); - acm->rx_endpoint = usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress); acm->is_int_ep = usb_endpoint_xfer_int(epread); if (acm->is_int_ep) acm->bInterval = epread->bInterval; @@ -1373,14 +1373,14 @@ made_compressed_probe: urb->transfer_dma = rb->dma; if (acm->is_int_ep) { usb_fill_int_urb(urb, acm->dev, - acm->rx_endpoint, + usb_rcvintpipe(usb_dev, epread->bEndpointAddress), rb->base, acm->readsize, acm_read_bulk_callback, rb, acm->bInterval); } else { usb_fill_bulk_urb(urb, acm->dev, - acm->rx_endpoint, + usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress), rb->base, acm->readsize, acm_read_bulk_callback, rb); @@ -1708,6 +1708,7 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x20df, 0x0001), /* Simtec Electronics Entropy Key */ .driver_info = QUIRK_CONTROL_LINE_STATE, }, { USB_DEVICE(0x2184, 0x001c) }, /* GW Instek AFG-2225 */ + { USB_DEVICE(0x2184, 0x0036) }, /* GW Instek AFG-125 */ { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ }, /* Motorola H24 HSPA module: */ diff --git a/kernel/drivers/usb/class/cdc-acm.h b/kernel/drivers/usb/class/cdc-acm.h index ccfaba9ab..b30ac5fcd 100644 --- a/kernel/drivers/usb/class/cdc-acm.h +++ b/kernel/drivers/usb/class/cdc-acm.h @@ -95,7 +95,6 @@ struct acm { struct urb *read_urbs[ACM_NR]; struct acm_rb read_buffers[ACM_NR]; int rx_buflimit; - int rx_endpoint; spinlock_t read_lock; int write_used; /* number of non-empty write buffers */ int transmitting; diff --git a/kernel/drivers/usb/class/usbtmc.c b/kernel/drivers/usb/class/usbtmc.c index 7a11a8263..deaddb950 100644 --- a/kernel/drivers/usb/class/usbtmc.c +++ b/kernel/drivers/usb/class/usbtmc.c @@ -121,6 +121,7 @@ static void usbtmc_delete(struct kref *kref) struct usbtmc_device_data *data = to_usbtmc_data(kref); usb_put_dev(data->usb_dev); + kfree(data); } static int usbtmc_open(struct inode *inode, struct file *filp) @@ -1104,7 +1105,7 @@ static int usbtmc_probe(struct usb_interface *intf, dev_dbg(&intf->dev, "%s called\n", __func__); - data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL); + data = kmalloc(sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; diff --git a/kernel/drivers/usb/common/common.c b/kernel/drivers/usb/common/common.c index 673d53038..a00bfb93a 100644 --- a/kernel/drivers/usb/common/common.c +++ b/kernel/drivers/usb/common/common.c @@ -50,6 +50,7 @@ static const char *const speed_names[] = { [USB_SPEED_HIGH] = "high-speed", [USB_SPEED_WIRELESS] = "wireless", [USB_SPEED_SUPER] = "super-speed", + [USB_SPEED_SUPER_PLUS] = "super-speed-plus", }; const char *usb_speed_string(enum usb_device_speed speed) diff --git a/kernel/drivers/usb/common/usb-otg-fsm.c b/kernel/drivers/usb/common/usb-otg-fsm.c index 61d538aa2..4f4f06a58 100644 --- a/kernel/drivers/usb/common/usb-otg-fsm.c +++ b/kernel/drivers/usb/common/usb-otg-fsm.c @@ -21,6 +21,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/mutex.h> @@ -365,3 +366,4 @@ int otg_statemachine(struct otg_fsm *fsm) return state_changed; } EXPORT_SYMBOL_GPL(otg_statemachine); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/core/config.c b/kernel/drivers/usb/core/config.c index 5050760f5..ac30a051a 100644 --- a/kernel/drivers/usb/core/config.c +++ b/kernel/drivers/usb/core/config.c @@ -142,6 +142,31 @@ static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, } } +static const unsigned short low_speed_maxpacket_maxes[4] = { + [USB_ENDPOINT_XFER_CONTROL] = 8, + [USB_ENDPOINT_XFER_ISOC] = 0, + [USB_ENDPOINT_XFER_BULK] = 0, + [USB_ENDPOINT_XFER_INT] = 8, +}; +static const unsigned short full_speed_maxpacket_maxes[4] = { + [USB_ENDPOINT_XFER_CONTROL] = 64, + [USB_ENDPOINT_XFER_ISOC] = 1023, + [USB_ENDPOINT_XFER_BULK] = 64, + [USB_ENDPOINT_XFER_INT] = 64, +}; +static const unsigned short high_speed_maxpacket_maxes[4] = { + [USB_ENDPOINT_XFER_CONTROL] = 64, + [USB_ENDPOINT_XFER_ISOC] = 1024, + [USB_ENDPOINT_XFER_BULK] = 512, + [USB_ENDPOINT_XFER_INT] = 1024, +}; +static const unsigned short super_speed_maxpacket_maxes[4] = { + [USB_ENDPOINT_XFER_CONTROL] = 512, + [USB_ENDPOINT_XFER_ISOC] = 1024, + [USB_ENDPOINT_XFER_BULK] = 1024, + [USB_ENDPOINT_XFER_INT] = 1024, +}; + static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, int asnum, struct usb_host_interface *ifp, int num_ep, unsigned char *buffer, int size) @@ -150,6 +175,8 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, struct usb_endpoint_descriptor *d; struct usb_host_endpoint *endpoint; int n, i, j, retval; + unsigned int maxp; + const unsigned short *maxpacket_maxes; d = (struct usb_endpoint_descriptor *) buffer; buffer += d->bLength; @@ -178,28 +205,43 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, if (ifp->desc.bNumEndpoints >= num_ep) goto skip_to_next_endpoint_or_interface_descriptor; + /* Check for duplicate endpoint addresses */ + for (i = 0; i < ifp->desc.bNumEndpoints; ++i) { + if (ifp->endpoint[i].desc.bEndpointAddress == + d->bEndpointAddress) { + dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n", + cfgno, inum, asnum, d->bEndpointAddress); + goto skip_to_next_endpoint_or_interface_descriptor; + } + } + endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints]; ++ifp->desc.bNumEndpoints; memcpy(&endpoint->desc, d, n); INIT_LIST_HEAD(&endpoint->urb_list); - /* Fix up bInterval values outside the legal range. Use 32 ms if no - * proper value can be guessed. */ + /* + * Fix up bInterval values outside the legal range. + * Use 10 or 8 ms if no proper value can be guessed. + */ i = 0; /* i = min, j = max, n = default */ j = 255; if (usb_endpoint_xfer_int(d)) { i = 1; switch (to_usb_device(ddev)->speed) { + case USB_SPEED_SUPER_PLUS: case USB_SPEED_SUPER: case USB_SPEED_HIGH: - /* Many device manufacturers are using full-speed + /* + * Many device manufacturers are using full-speed * bInterval values in high-speed interrupt endpoint - * descriptors. Try to fix those and fall back to a - * 32 ms default value otherwise. */ + * descriptors. Try to fix those and fall back to an + * 8-ms default value otherwise. + */ n = fls(d->bInterval*8); if (n == 0) - n = 9; /* 32 ms = 2^(9-1) uframes */ + n = 7; /* 8 ms = 2^(7-1) uframes */ j = 16; /* @@ -214,10 +256,12 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, } break; default: /* USB_SPEED_FULL or _LOW */ - /* For low-speed, 10 ms is the official minimum. + /* + * For low-speed, 10 ms is the official minimum. * But some "overclocked" devices might want faster - * polling so we'll allow it. */ - n = 32; + * polling so we'll allow it. + */ + n = 10; break; } } else if (usb_endpoint_xfer_isoc(d)) { @@ -225,10 +269,10 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, j = 16; switch (to_usb_device(ddev)->speed) { case USB_SPEED_HIGH: - n = 9; /* 32 ms = 2^(9-1) uframes */ + n = 7; /* 8 ms = 2^(7-1) uframes */ break; default: /* USB_SPEED_FULL */ - n = 6; /* 32 ms = 2^(6-1) frames */ + n = 4; /* 8 ms = 2^(4-1) frames */ break; } } @@ -256,6 +300,42 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, endpoint->desc.wMaxPacketSize = cpu_to_le16(8); } + /* Validate the wMaxPacketSize field */ + maxp = usb_endpoint_maxp(&endpoint->desc); + + /* Find the highest legal maxpacket size for this endpoint */ + i = 0; /* additional transactions per microframe */ + switch (to_usb_device(ddev)->speed) { + case USB_SPEED_LOW: + maxpacket_maxes = low_speed_maxpacket_maxes; + break; + case USB_SPEED_FULL: + maxpacket_maxes = full_speed_maxpacket_maxes; + break; + case USB_SPEED_HIGH: + /* Bits 12..11 are allowed only for HS periodic endpoints */ + if (usb_endpoint_xfer_int(d) || usb_endpoint_xfer_isoc(d)) { + i = maxp & (BIT(12) | BIT(11)); + maxp &= ~i; + } + /* fallthrough */ + default: + maxpacket_maxes = high_speed_maxpacket_maxes; + break; + case USB_SPEED_SUPER: + case USB_SPEED_SUPER_PLUS: + maxpacket_maxes = super_speed_maxpacket_maxes; + break; + } + j = maxpacket_maxes[usb_endpoint_type(&endpoint->desc)]; + + if (maxp > j) { + dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid maxpacket %d, setting to %d\n", + cfgno, inum, asnum, d->bEndpointAddress, maxp, j); + maxp = j; + endpoint->desc.wMaxPacketSize = cpu_to_le16(i | maxp); + } + /* * Some buggy high speed devices have bulk endpoints using * maxpacket sizes other than 512. High speed HCDs may not @@ -263,9 +343,6 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, */ if (to_usb_device(ddev)->speed == USB_SPEED_HIGH && usb_endpoint_xfer_bulk(d)) { - unsigned maxp; - - maxp = usb_endpoint_maxp(&endpoint->desc) & 0x07ff; if (maxp != 512) dev_warn(ddev, "config %d interface %d altsetting %d " "bulk endpoint 0x%X has invalid maxpacket %d\n", @@ -274,7 +351,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum, } /* Parse a possible SuperSpeed endpoint companion descriptor */ - if (to_usb_device(ddev)->speed == USB_SPEED_SUPER) + if (to_usb_device(ddev)->speed >= USB_SPEED_SUPER) usb_parse_ss_endpoint_companion(ddev, cfgno, inum, asnum, endpoint, buffer, size); diff --git a/kernel/drivers/usb/core/devices.c b/kernel/drivers/usb/core/devices.c index 2a3bbdf7e..332ed277a 100644 --- a/kernel/drivers/usb/core/devices.c +++ b/kernel/drivers/usb/core/devices.c @@ -221,7 +221,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end, break; case USB_ENDPOINT_XFER_INT: type = "Int."; - if (speed == USB_SPEED_HIGH || speed == USB_SPEED_SUPER) + if (speed == USB_SPEED_HIGH || speed >= USB_SPEED_SUPER) interval = 1 << (desc->bInterval - 1); else interval = desc->bInterval; @@ -230,7 +230,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end, return start; } interval *= (speed == USB_SPEED_HIGH || - speed == USB_SPEED_SUPER) ? 125 : 1000; + speed >= USB_SPEED_SUPER) ? 125 : 1000; if (interval % 1000) unit = 'u'; else { @@ -322,7 +322,7 @@ static char *usb_dump_config_descriptor(char *start, char *end, if (start > end) return start; - if (speed == USB_SPEED_SUPER) + if (speed >= USB_SPEED_SUPER) mul = 8; else mul = 2; @@ -534,6 +534,8 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes, speed = "480"; break; case USB_SPEED_SUPER: speed = "5000"; break; + case USB_SPEED_SUPER_PLUS: + speed = "10000"; break; default: speed = "??"; } @@ -553,7 +555,7 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes, /* super/high speed reserves 80%, full/low reserves 90% */ if (usbdev->speed == USB_SPEED_HIGH || - usbdev->speed == USB_SPEED_SUPER) + usbdev->speed >= USB_SPEED_SUPER) max = 800; else max = FRAME_TIME_MAX_USECS_ALLOC; diff --git a/kernel/drivers/usb/core/devio.c b/kernel/drivers/usb/core/devio.c index 38ae877c4..f5c92d904 100644 --- a/kernel/drivers/usb/core/devio.c +++ b/kernel/drivers/usb/core/devio.c @@ -1203,10 +1203,11 @@ static int proc_getdriver(struct usb_dev_state *ps, void __user *arg) static int proc_connectinfo(struct usb_dev_state *ps, void __user *arg) { - struct usbdevfs_connectinfo ci = { - .devnum = ps->dev->devnum, - .slow = ps->dev->speed == USB_SPEED_LOW - }; + struct usbdevfs_connectinfo ci; + + memset(&ci, 0, sizeof(ci)); + ci.devnum = ps->dev->devnum; + ci.slow = ps->dev->speed == USB_SPEED_LOW; if (copy_to_user(arg, &ci, sizeof(ci))) return -EFAULT; @@ -1529,11 +1530,17 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb as->urb->start_frame = uurb->start_frame; as->urb->number_of_packets = number_of_packets; as->urb->stream_id = stream_id; - if (uurb->type == USBDEVFS_URB_TYPE_ISO || - ps->dev->speed == USB_SPEED_HIGH) - as->urb->interval = 1 << min(15, ep->desc.bInterval - 1); - else - as->urb->interval = ep->desc.bInterval; + + if (ep->desc.bInterval) { + if (uurb->type == USBDEVFS_URB_TYPE_ISO || + ps->dev->speed == USB_SPEED_HIGH || + ps->dev->speed >= USB_SPEED_SUPER) + as->urb->interval = 1 << + min(15, ep->desc.bInterval - 1); + else + as->urb->interval = ep->desc.bInterval; + } + as->urb->context = as; as->urb->complete = async_completed; for (totlen = u = 0; u < number_of_packets; u++) { diff --git a/kernel/drivers/usb/core/driver.c b/kernel/drivers/usb/core/driver.c index 56593a9a8..dadd1e8df 100644 --- a/kernel/drivers/usb/core/driver.c +++ b/kernel/drivers/usb/core/driver.c @@ -284,7 +284,7 @@ static int usb_probe_interface(struct device *dev) struct usb_device *udev = interface_to_usbdev(intf); const struct usb_device_id *id; int error = -ENODEV; - int lpm_disable_error; + int lpm_disable_error = -ENODEV; dev_dbg(dev, "%s\n", __func__); @@ -336,12 +336,14 @@ static int usb_probe_interface(struct device *dev) * setting during probe, that should also be fine. usb_set_interface() * will attempt to disable LPM, and fail if it can't disable it. */ - lpm_disable_error = usb_unlocked_disable_lpm(udev); - if (lpm_disable_error && driver->disable_hub_initiated_lpm) { - dev_err(&intf->dev, "%s Failed to disable LPM for driver %s\n.", - __func__, driver->name); - error = lpm_disable_error; - goto err; + if (driver->disable_hub_initiated_lpm) { + lpm_disable_error = usb_unlocked_disable_lpm(udev); + if (lpm_disable_error) { + dev_err(&intf->dev, "%s Failed to disable LPM for driver %s\n.", + __func__, driver->name); + error = lpm_disable_error; + goto err; + } } /* Carry out a deferred switch to altsetting 0 */ @@ -391,7 +393,8 @@ static int usb_unbind_interface(struct device *dev) struct usb_interface *intf = to_usb_interface(dev); struct usb_host_endpoint *ep, **eps = NULL; struct usb_device *udev; - int i, j, error, r, lpm_disable_error; + int i, j, error, r; + int lpm_disable_error = -ENODEV; intf->condition = USB_INTERFACE_UNBINDING; @@ -399,12 +402,13 @@ static int usb_unbind_interface(struct device *dev) udev = interface_to_usbdev(intf); error = usb_autoresume_device(udev); - /* Hub-initiated LPM policy may change, so attempt to disable LPM until + /* If hub-initiated LPM policy may change, attempt to disable LPM until * the driver is unbound. If LPM isn't disabled, that's fine because it * wouldn't be enabled unless all the bound interfaces supported * hub-initiated LPM. */ - lpm_disable_error = usb_unlocked_disable_lpm(udev); + if (driver->disable_hub_initiated_lpm) + lpm_disable_error = usb_unlocked_disable_lpm(udev); /* * Terminate all URBs for this interface unless the driver @@ -502,11 +506,15 @@ static int usb_unbind_interface(struct device *dev) int usb_driver_claim_interface(struct usb_driver *driver, struct usb_interface *iface, void *priv) { - struct device *dev = &iface->dev; + struct device *dev; struct usb_device *udev; int retval = 0; - int lpm_disable_error; + int lpm_disable_error = -ENODEV; + if (!iface) + return -ENODEV; + + dev = &iface->dev; if (dev->driver) return -EBUSY; @@ -522,12 +530,14 @@ int usb_driver_claim_interface(struct usb_driver *driver, iface->condition = USB_INTERFACE_BOUND; - /* Disable LPM until this driver is bound. */ - lpm_disable_error = usb_unlocked_disable_lpm(udev); - if (lpm_disable_error && driver->disable_hub_initiated_lpm) { - dev_err(&iface->dev, "%s Failed to disable LPM for driver %s\n.", - __func__, driver->name); - return -ENOMEM; + /* See the comment about disabling LPM in usb_probe_interface(). */ + if (driver->disable_hub_initiated_lpm) { + lpm_disable_error = usb_unlocked_disable_lpm(udev); + if (lpm_disable_error) { + dev_err(&iface->dev, "%s Failed to disable LPM for driver %s\n.", + __func__, driver->name); + return -ENOMEM; + } } /* Claimed interfaces are initially inactive (suspended) and diff --git a/kernel/drivers/usb/core/hcd-pci.c b/kernel/drivers/usb/core/hcd-pci.c index 9eb1cff28..40378487e 100644 --- a/kernel/drivers/usb/core/hcd-pci.c +++ b/kernel/drivers/usb/core/hcd-pci.c @@ -74,6 +74,15 @@ static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd, if (companion->bus != pdev->bus || PCI_SLOT(companion->devfn) != slot) continue; + + /* + * Companion device should be either UHCI,OHCI or EHCI host + * controller, otherwise skip. + */ + if (companion->class != CL_UHCI && companion->class != CL_OHCI && + companion->class != CL_EHCI) + continue; + companion_hcd = pci_get_drvdata(companion); if (!companion_hcd || !companion_hcd->self.root_hub) continue; @@ -197,7 +206,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) * The xHCI driver has its own irq management * make sure irq setup is not touched for xhci in generic hcd code */ - if ((driver->flags & HCD_MASK) != HCD_USB3) { + if ((driver->flags & HCD_MASK) < HCD_USB3) { if (!dev->irq) { dev_err(&dev->dev, "Found HC with no IRQ. Check BIOS/PCI %s setup!\n", diff --git a/kernel/drivers/usb/core/hcd.c b/kernel/drivers/usb/core/hcd.c index a8f2f5bf2..5fc9a1472 100644 --- a/kernel/drivers/usb/core/hcd.c +++ b/kernel/drivers/usb/core/hcd.c @@ -1078,7 +1078,7 @@ static int register_root_hub(struct usb_hcd *hcd) retval = usb_get_bos_descriptor(usb_dev); if (!retval) { usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev); - } else if (usb_dev->speed == USB_SPEED_SUPER) { + } else if (usb_dev->speed >= USB_SPEED_SUPER) { mutex_unlock(&usb_bus_list_lock); dev_dbg(parent_dev, "can't read %s bos descriptor %d\n", dev_name(&usb_dev->dev), retval); @@ -2112,7 +2112,7 @@ int usb_alloc_streams(struct usb_interface *interface, hcd = bus_to_hcd(dev->bus); if (!hcd->driver->alloc_streams || !hcd->driver->free_streams) return -EINVAL; - if (dev->speed != USB_SPEED_SUPER) + if (dev->speed < USB_SPEED_SUPER) return -EINVAL; if (dev->state < USB_STATE_CONFIGURED) return -ENODEV; @@ -2160,7 +2160,7 @@ int usb_free_streams(struct usb_interface *interface, dev = interface_to_usbdev(interface); hcd = bus_to_hcd(dev->bus); - if (dev->speed != USB_SPEED_SUPER) + if (dev->speed < USB_SPEED_SUPER) return -EINVAL; /* Double-free is not allowed */ diff --git a/kernel/drivers/usb/core/hub.c b/kernel/drivers/usb/core/hub.c index 1560f3f3e..780db8bb2 100644 --- a/kernel/drivers/usb/core/hub.c +++ b/kernel/drivers/usb/core/hub.c @@ -101,6 +101,7 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem); static void hub_release(struct kref *kref); static int usb_reset_and_verify_device(struct usb_device *udev); +static int hub_port_disable(struct usb_hub *hub, int port1, int set_state); static inline char *portspeed(struct usb_hub *hub, int portstatus) { @@ -298,7 +299,7 @@ static void usb_set_lpm_parameters(struct usb_device *udev) unsigned int hub_u1_del; unsigned int hub_u2_del; - if (!udev->lpm_capable || udev->speed != USB_SPEED_SUPER) + if (!udev->lpm_capable || udev->speed < USB_SPEED_SUPER) return; hub = usb_hub_to_struct_hub(udev->parent); @@ -883,88 +884,6 @@ static int hub_set_port_link_state(struct usb_hub *hub, int port1, } /* - * If USB 3.0 ports are placed into the Disabled state, they will no longer - * detect any device connects or disconnects. This is generally not what the - * USB core wants, since it expects a disabled port to produce a port status - * change event when a new device connects. - * - * Instead, set the link state to Disabled, wait for the link to settle into - * that state, clear any change bits, and then put the port into the RxDetect - * state. - */ -static int hub_usb3_port_disable(struct usb_hub *hub, int port1) -{ - int ret; - int total_time; - u16 portchange, portstatus; - - if (!hub_is_superspeed(hub->hdev)) - return -EINVAL; - - ret = hub_port_status(hub, port1, &portstatus, &portchange); - if (ret < 0) - return ret; - - /* - * USB controller Advanced Micro Devices, Inc. [AMD] FCH USB XHCI - * Controller [1022:7814] will have spurious result making the following - * usb 3.0 device hotplugging route to the 2.0 root hub and recognized - * as high-speed device if we set the usb 3.0 port link state to - * Disabled. Since it's already in USB_SS_PORT_LS_RX_DETECT state, we - * check the state here to avoid the bug. - */ - if ((portstatus & USB_PORT_STAT_LINK_STATE) == - USB_SS_PORT_LS_RX_DETECT) { - dev_dbg(&hub->ports[port1 - 1]->dev, - "Not disabling port; link state is RxDetect\n"); - return ret; - } - - ret = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_SS_DISABLED); - if (ret) - return ret; - - /* Wait for the link to enter the disabled state. */ - for (total_time = 0; ; total_time += HUB_DEBOUNCE_STEP) { - ret = hub_port_status(hub, port1, &portstatus, &portchange); - if (ret < 0) - return ret; - - if ((portstatus & USB_PORT_STAT_LINK_STATE) == - USB_SS_PORT_LS_SS_DISABLED) - break; - if (total_time >= HUB_DEBOUNCE_TIMEOUT) - break; - msleep(HUB_DEBOUNCE_STEP); - } - if (total_time >= HUB_DEBOUNCE_TIMEOUT) - dev_warn(&hub->ports[port1 - 1]->dev, - "Could not disable after %d ms\n", total_time); - - return hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_RX_DETECT); -} - -static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) -{ - struct usb_port *port_dev = hub->ports[port1 - 1]; - struct usb_device *hdev = hub->hdev; - int ret = 0; - - if (port_dev->child && set_state) - usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED); - if (!hub->error) { - if (hub_is_superspeed(hub->hdev)) - ret = hub_usb3_port_disable(hub, port1); - else - ret = usb_clear_port_feature(hdev, port1, - USB_PORT_FEAT_ENABLE); - } - if (ret && ret != -ENODEV) - dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret); - return ret; -} - -/* * Disable a port and mark a logical connect-change event, so that some * time later hub_wq will disconnect() any existing usb_device on the port * and will re-enumerate if there actually is a device attached. @@ -1036,14 +955,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) /* Continue a partial initialization */ if (type == HUB_INIT2 || type == HUB_INIT3) { - device_lock(hub->intfdev); + device_lock(&hdev->dev); /* Was the hub disconnected while we were waiting? */ - if (hub->disconnected) { - device_unlock(hub->intfdev); - kref_put(&hub->kref, hub_release); - return; - } + if (hub->disconnected) + goto disconnected; if (type == HUB_INIT2) goto init2; goto init3; @@ -1246,7 +1162,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) queue_delayed_work(system_power_efficient_wq, &hub->init_work, msecs_to_jiffies(delay)); - device_unlock(hub->intfdev); + device_unlock(&hdev->dev); return; /* Continues at init3: below */ } else { msleep(delay); @@ -1265,12 +1181,12 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) /* Scan all ports that need attention */ kick_hub_wq(hub); - /* Allow autosuspend if it was suppressed */ - if (type <= HUB_INIT3) + if (type == HUB_INIT2 || type == HUB_INIT3) { + /* Allow autosuspend if it was suppressed */ + disconnected: usb_autopm_put_interface_async(to_usb_interface(hub->intfdev)); - - if (type == HUB_INIT2 || type == HUB_INIT3) - device_unlock(hub->intfdev); + device_unlock(&hdev->dev); + } kref_put(&hub->kref, hub_release); } @@ -1299,8 +1215,6 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) struct usb_device *hdev = hub->hdev; int i; - cancel_delayed_work_sync(&hub->init_work); - /* hub_wq and related activity won't re-trigger */ hub->quiescing = 1; @@ -2645,7 +2559,7 @@ static unsigned hub_is_wusb(struct usb_hub *hub) */ static bool use_new_scheme(struct usb_device *udev, int retry) { - if (udev->speed == USB_SPEED_SUPER) + if (udev->speed >= USB_SPEED_SUPER) return false; return USE_NEW_SCHEME(retry); @@ -3985,7 +3899,7 @@ int usb_disable_lpm(struct usb_device *udev) struct usb_hcd *hcd; if (!udev || !udev->parent || - udev->speed != USB_SPEED_SUPER || + udev->speed < USB_SPEED_SUPER || !udev->lpm_capable || udev->state < USB_STATE_DEFAULT) return 0; @@ -4042,7 +3956,7 @@ void usb_enable_lpm(struct usb_device *udev) struct usb_hcd *hcd; if (!udev || !udev->parent || - udev->speed != USB_SPEED_SUPER || + udev->speed < USB_SPEED_SUPER || !udev->lpm_capable || udev->state < USB_STATE_DEFAULT) return; @@ -4078,6 +3992,26 @@ void usb_unlocked_enable_lpm(struct usb_device *udev) } EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm); +/* usb3 devices use U3 for disabled, make sure remote wakeup is disabled */ +static void hub_usb3_port_prepare_disable(struct usb_hub *hub, + struct usb_port *port_dev) +{ + struct usb_device *udev = port_dev->child; + int ret; + + if (udev && udev->port_is_suspended && udev->do_remote_wakeup) { + ret = hub_set_port_link_state(hub, port_dev->portnum, + USB_SS_PORT_LS_U0); + if (!ret) { + msleep(USB_RESUME_TIMEOUT); + ret = usb_disable_remote_wakeup(udev); + } + if (ret) + dev_warn(&udev->dev, + "Port disable: can't disable remote wake\n"); + udev->do_remote_wakeup = 0; + } +} #else /* CONFIG_PM */ @@ -4085,6 +4019,9 @@ EXPORT_SYMBOL_GPL(usb_unlocked_enable_lpm); #define hub_resume NULL #define hub_reset_resume NULL +static inline void hub_usb3_port_prepare_disable(struct usb_hub *hub, + struct usb_port *port_dev) { } + int usb_disable_lpm(struct usb_device *udev) { return 0; @@ -4120,6 +4057,34 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, #endif /* CONFIG_PM */ +/* + * USB-3 does not have a similar link state as USB-2 that will avoid negotiating + * a connection with a plugged-in cable but will signal the host when the cable + * is unplugged. Disable remote wake and set link state to U3 for USB-3 devices + */ +static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) +{ + struct usb_port *port_dev = hub->ports[port1 - 1]; + struct usb_device *hdev = hub->hdev; + int ret = 0; + + if (!hub->error) { + if (hub_is_superspeed(hub->hdev)) { + hub_usb3_port_prepare_disable(hub, port_dev); + ret = hub_set_port_link_state(hub, port_dev->portnum, + USB_SS_PORT_LS_U3); + } else { + ret = usb_clear_port_feature(hdev, port1, + USB_PORT_FEAT_ENABLE); + } + } + if (port_dev->child && set_state) + usb_set_device_state(port_dev->child, USB_STATE_NOTATTACHED); + if (ret && ret != -ENODEV) + dev_err(&port_dev->dev, "cannot disable (err = %d)\n", ret); + return ret; +} + /* USB 2.0 spec, 7.1.7.3 / fig 7-29: * @@ -4277,7 +4242,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, { struct usb_device *hdev = hub->hdev; struct usb_hcd *hcd = bus_to_hcd(hdev->bus); - int i, j, retval; + int retries, operations, retval, i; unsigned delay = HUB_SHORT_RESET_TIME; enum usb_device_speed oldspeed = udev->speed; const char *speed; @@ -4308,7 +4273,9 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, retval = -ENODEV; - if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed) { + /* Don't allow speed changes at reset, except usb 3.0 to faster */ + if (oldspeed != USB_SPEED_UNKNOWN && oldspeed != udev->speed && + !(oldspeed == USB_SPEED_SUPER && udev->speed > oldspeed)) { dev_dbg(&udev->dev, "device reset changed speed!\n"); goto fail; } @@ -4320,6 +4287,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * reported as 0xff in the device descriptor). WUSB1.0[4.8.1]. */ switch (udev->speed) { + case USB_SPEED_SUPER_PLUS: case USB_SPEED_SUPER: case USB_SPEED_WIRELESS: /* fixed at 512 */ udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512); @@ -4346,7 +4314,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, else speed = usb_speed_string(udev->speed); - if (udev->speed != USB_SPEED_SUPER) + if (udev->speed < USB_SPEED_SUPER) dev_info(&udev->dev, "%s %s USB device number %d using %s\n", (udev->config) ? "reset" : "new", speed, @@ -4379,7 +4347,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * first 8 bytes of the device descriptor to get the ep0 maxpacket * value. */ - for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) { + for (retries = 0; retries < GET_DESCRIPTOR_TRIES; (++retries, msleep(100))) { bool did_new_scheme = false; if (use_new_scheme(udev, retry_counter)) { @@ -4406,7 +4374,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * 255 is for WUSB devices, we actually need to use * 512 (WUSB1.0[4.8.1]). */ - for (j = 0; j < 3; ++j) { + for (operations = 0; operations < 3; ++operations) { buf->bMaxPacketSize0 = 0; r = usb_control_msg(udev, usb_rcvaddr0pipe(), USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, @@ -4426,7 +4394,13 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, r = -EPROTO; break; } - if (r == 0) + /* + * Some devices time out if they are powered on + * when already connected. They need a second + * reset. But only on the first attempt, + * lest we get into a time out/reset loop + */ + if (r == 0 || (r == -ETIMEDOUT && retries == 0)) break; } udev->descriptor.bMaxPacketSize0 = @@ -4458,7 +4432,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * authorization will assign the final address. */ if (udev->wusb == 0) { - for (j = 0; j < SET_ADDRESS_TRIES; ++j) { + for (operations = 0; operations < SET_ADDRESS_TRIES; ++operations) { retval = hub_set_address(udev, devnum); if (retval >= 0) break; @@ -4470,11 +4444,12 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, devnum, retval); goto fail; } - if (udev->speed == USB_SPEED_SUPER) { + if (udev->speed >= USB_SPEED_SUPER) { devnum = udev->devnum; dev_info(&udev->dev, - "%s SuperSpeed USB device number %d using %s\n", + "%s SuperSpeed%s USB device number %d using %s\n", (udev->config) ? "reset" : "new", + (udev->speed == USB_SPEED_SUPER_PLUS) ? "Plus" : "", devnum, udev->bus->controller->driver->name); } @@ -4513,7 +4488,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, * got from those devices show they aren't superspeed devices. Warm * reset the port attached by the devices can fix them. */ - if ((udev->speed == USB_SPEED_SUPER) && + if ((udev->speed >= USB_SPEED_SUPER) && (le16_to_cpu(udev->descriptor.bcdUSB) < 0x0300)) { dev_err(&udev->dev, "got a wrong device descriptor, " "warm reset device\n"); @@ -4524,7 +4499,7 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, } if (udev->descriptor.bMaxPacketSize0 == 0xff || - udev->speed == USB_SPEED_SUPER) + udev->speed >= USB_SPEED_SUPER) i = 512; else i = udev->descriptor.bMaxPacketSize0; @@ -4734,7 +4709,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, udev->level = hdev->level + 1; udev->wusb = hub_is_wusb(hub); - /* Only USB 3.0 devices are connected to SuperSpeed hubs. */ + /* Devices connected to SuperSpeed hubs are USB 3.0 or later */ if (hub_is_superspeed(hub->hdev)) udev->speed = USB_SPEED_SUPER; else @@ -5386,6 +5361,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev) } bos = udev->bos; + udev->bos = NULL; for (i = 0; i < SET_CONFIG_TRIES; ++i) { @@ -5478,11 +5454,8 @@ done: usb_set_usb2_hardware_lpm(udev, 1); usb_unlocked_enable_lpm(udev); usb_enable_ltm(udev); - /* release the new BOS descriptor allocated by hub_port_init() */ - if (udev->bos != bos) { - usb_release_bos_descriptor(udev); - udev->bos = bos; - } + usb_release_bos_descriptor(udev); + udev->bos = bos; return 0; re_enumerate: diff --git a/kernel/drivers/usb/core/quirks.c b/kernel/drivers/usb/core/quirks.c index 6dc810bce..24f9f9896 100644 --- a/kernel/drivers/usb/core/quirks.c +++ b/kernel/drivers/usb/core/quirks.c @@ -37,6 +37,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* CBM - Flash disk */ { USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME }, + /* WORLDE easy key (easykey.25) MIDI controller */ + { USB_DEVICE(0x0218, 0x0401), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* HP 5300/5370C scanner */ { USB_DEVICE(0x03f0, 0x0701), .driver_info = USB_QUIRK_STRING_FETCH_255 }, @@ -44,6 +48,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Creative SB Audigy 2 NX */ { USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME }, + /* USB3503 */ + { USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Microsoft Wireless Laser Mouse 6000 Receiver */ { USB_DEVICE(0x045e, 0x00e1), .driver_info = USB_QUIRK_RESET_RESUME }, @@ -125,6 +132,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x04f3, 0x016f), .driver_info = USB_QUIRK_DEVICE_QUALIFIER }, + { USB_DEVICE(0x04f3, 0x0381), .driver_info = + USB_QUIRK_NO_LPM }, + { USB_DEVICE(0x04f3, 0x21b8), .driver_info = USB_QUIRK_DEVICE_QUALIFIER }, @@ -173,6 +183,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* MAYA44USB sound device */ { USB_DEVICE(0x0a92, 0x0091), .driver_info = USB_QUIRK_RESET_RESUME }, + /* ASUS Base Station(T100) */ + { USB_DEVICE(0x0b05, 0x17e0), .driver_info = + USB_QUIRK_IGNORE_REMOTE_WAKEUP }, + /* Action Semiconductor flash disk */ { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255 }, @@ -188,26 +202,22 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1908, 0x1315), .driver_info = USB_QUIRK_HONOR_BNUMINTERFACES }, - /* INTEL VALUE SSD */ - { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME }, - - /* USB3503 */ - { USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME }, - - /* ASUS Base Station(T100) */ - { USB_DEVICE(0x0b05, 0x17e0), .driver_info = - USB_QUIRK_IGNORE_REMOTE_WAKEUP }, - /* Protocol and OTG Electrical Test Device */ { USB_DEVICE(0x1a0a, 0x0200), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + /* Acer C120 LED Projector */ + { USB_DEVICE(0x1de1, 0xc102), .driver_info = USB_QUIRK_NO_LPM }, + /* Blackmagic Design Intensity Shuttle */ { USB_DEVICE(0x1edb, 0xbd3b), .driver_info = USB_QUIRK_NO_LPM }, /* Blackmagic Design UltraStudio SDI */ { USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM }, + /* INTEL VALUE SSD */ + { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME }, + { } /* terminating entry must be last */ }; diff --git a/kernel/drivers/usb/core/urb.c b/kernel/drivers/usb/core/urb.c index 3d274778c..c601e25b6 100644 --- a/kernel/drivers/usb/core/urb.c +++ b/kernel/drivers/usb/core/urb.c @@ -401,7 +401,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) /* SuperSpeed isoc endpoints have up to 16 bursts of up to * 3 packets each */ - if (dev->speed == USB_SPEED_SUPER) { + if (dev->speed >= USB_SPEED_SUPER) { int burst = 1 + ep->ss_ep_comp.bMaxBurst; int mult = USB_SS_MULT(ep->ss_ep_comp.bmAttributes); max *= burst; @@ -499,6 +499,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) } /* too big? */ switch (dev->speed) { + case USB_SPEED_SUPER_PLUS: case USB_SPEED_SUPER: /* units are 125us */ /* Handle up to 2^(16-1) microframes */ if (urb->interval > (1 << 15)) diff --git a/kernel/drivers/usb/core/usb.h b/kernel/drivers/usb/core/usb.h index 05b5e17ab..53318126e 100644 --- a/kernel/drivers/usb/core/usb.h +++ b/kernel/drivers/usb/core/usb.h @@ -45,7 +45,7 @@ static inline unsigned usb_get_max_power(struct usb_device *udev, struct usb_host_config *c) { /* SuperSpeed power is in 8 mA units; others are in 2 mA units */ - unsigned mul = (udev->speed == USB_SPEED_SUPER ? 8 : 2); + unsigned mul = (udev->speed >= USB_SPEED_SUPER ? 8 : 2); return c->desc.bMaxPower * mul; } diff --git a/kernel/drivers/usb/dwc2/core.h b/kernel/drivers/usb/dwc2/core.h index a66d3cb62..a738a68d2 100644 --- a/kernel/drivers/usb/dwc2/core.h +++ b/kernel/drivers/usb/dwc2/core.h @@ -44,6 +44,17 @@ #include <linux/usb/phy.h> #include "hw.h" +#ifdef CONFIG_MIPS +/* + * There are some MIPS machines that can run in either big-endian + * or little-endian mode and that use the dwc2 register without + * a byteswap in both ways. + * Unlike other architectures, MIPS apparently does not require a + * barrier before the __raw_writel() to synchronize with DMA but does + * require the barrier after the __raw_writel() to serialize a set of + * writes. This set of operations was added specifically for MIPS and + * should only be used there. + */ static inline u32 dwc2_readl(const void __iomem *addr) { u32 value = __raw_readl(addr); @@ -70,6 +81,22 @@ static inline void dwc2_writel(u32 value, void __iomem *addr) pr_info("INFO:: wrote %08x to %p\n", value, addr); #endif } +#else +/* Normal architectures just use readl/write */ +static inline u32 dwc2_readl(const void __iomem *addr) +{ + return readl(addr); +} + +static inline void dwc2_writel(u32 value, void __iomem *addr) +{ + writel(value, addr); + +#ifdef DWC2_LOG_WRITES + pr_info("info:: wrote %08x to %p\n", value, addr); +#endif +} +#endif /* Maximum number of Endpoints/HostChannels */ #define MAX_EPS_CHANNELS 16 diff --git a/kernel/drivers/usb/dwc3/core.h b/kernel/drivers/usb/dwc3/core.h index 78be201d8..68d11d7d4 100644 --- a/kernel/drivers/usb/dwc3/core.h +++ b/kernel/drivers/usb/dwc3/core.h @@ -42,9 +42,7 @@ #define DWC3_XHCI_RESOURCES_NUM 2 #define DWC3_SCRATCHBUF_SIZE 4096 /* each buffer is assumed to be 4KiB */ -#define DWC3_EVENT_SIZE 4 /* bytes */ -#define DWC3_EVENT_MAX_NUM 64 /* 2 events/endpoint */ -#define DWC3_EVENT_BUFFERS_SIZE (DWC3_EVENT_SIZE * DWC3_EVENT_MAX_NUM) +#define DWC3_EVENT_BUFFERS_SIZE 4096 #define DWC3_EVENT_TYPE_MASK 0xfe #define DWC3_EVENT_TYPE_DEV 0 diff --git a/kernel/drivers/usb/dwc3/dwc3-exynos.c b/kernel/drivers/usb/dwc3/dwc3-exynos.c index dd5cb5577..2f1fb7e7a 100644 --- a/kernel/drivers/usb/dwc3/dwc3-exynos.c +++ b/kernel/drivers/usb/dwc3/dwc3-exynos.c @@ -128,12 +128,6 @@ static int dwc3_exynos_probe(struct platform_device *pdev) platform_set_drvdata(pdev, exynos); - ret = dwc3_exynos_register_phys(exynos); - if (ret) { - dev_err(dev, "couldn't register PHYs\n"); - return ret; - } - exynos->dev = dev; exynos->clk = devm_clk_get(dev, "usbdrd30"); @@ -183,20 +177,29 @@ static int dwc3_exynos_probe(struct platform_device *pdev) goto err3; } + ret = dwc3_exynos_register_phys(exynos); + if (ret) { + dev_err(dev, "couldn't register PHYs\n"); + goto err4; + } + if (node) { ret = of_platform_populate(node, NULL, NULL, dev); if (ret) { dev_err(dev, "failed to add dwc3 core\n"); - goto err4; + goto err5; } } else { dev_err(dev, "no device node, failed to add dwc3 core\n"); ret = -ENODEV; - goto err4; + goto err5; } return 0; +err5: + platform_device_unregister(exynos->usb2_phy); + platform_device_unregister(exynos->usb3_phy); err4: regulator_disable(exynos->vdd10); err3: diff --git a/kernel/drivers/usb/dwc3/dwc3-pci.c b/kernel/drivers/usb/dwc3/dwc3-pci.c index 009d83048..d2c0c1a8d 100644 --- a/kernel/drivers/usb/dwc3/dwc3-pci.c +++ b/kernel/drivers/usb/dwc3/dwc3-pci.c @@ -36,6 +36,8 @@ #define PCI_DEVICE_ID_INTEL_SPTH 0xa130 #define PCI_DEVICE_ID_INTEL_BXT 0x0aaa #define PCI_DEVICE_ID_INTEL_APL 0x5aaa +#define PCI_DEVICE_ID_INTEL_KBP 0xa2b0 +#define PCI_DEVICE_ID_INTEL_GLK 0x31aa static const struct acpi_gpio_params reset_gpios = { 0, 0, false }; static const struct acpi_gpio_params cs_gpios = { 1, 0, false }; @@ -214,6 +216,8 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTH), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), }, { } /* Terminating Entry */ }; diff --git a/kernel/drivers/usb/dwc3/ep0.c b/kernel/drivers/usb/dwc3/ep0.c index b13912d5f..f13e9e9fb 100644 --- a/kernel/drivers/usb/dwc3/ep0.c +++ b/kernel/drivers/usb/dwc3/ep0.c @@ -55,20 +55,13 @@ static const char *dwc3_ep0_state_string(enum dwc3_ep0_state state) } } -static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma, - u32 len, u32 type, bool chain) +static void dwc3_ep0_prepare_one_trb(struct dwc3 *dwc, u8 epnum, + dma_addr_t buf_dma, u32 len, u32 type, bool chain) { - struct dwc3_gadget_ep_cmd_params params; struct dwc3_trb *trb; struct dwc3_ep *dep; - int ret; - dep = dwc->eps[epnum]; - if (dep->flags & DWC3_EP_BUSY) { - dwc3_trace(trace_dwc3_ep0, "%s still busy", dep->name); - return 0; - } trb = &dwc->ep0_trb[dep->free_slot]; @@ -89,15 +82,25 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma, trb->ctrl |= (DWC3_TRB_CTRL_IOC | DWC3_TRB_CTRL_LST); - if (chain) + trace_dwc3_prepare_trb(dep, trb); +} + +static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum) +{ + struct dwc3_gadget_ep_cmd_params params; + struct dwc3_ep *dep; + int ret; + + dep = dwc->eps[epnum]; + if (dep->flags & DWC3_EP_BUSY) { + dwc3_trace(trace_dwc3_ep0, "%s still busy", dep->name); return 0; + } memset(¶ms, 0, sizeof(params)); params.param0 = upper_32_bits(dwc->ep0_trb_addr); params.param1 = lower_32_bits(dwc->ep0_trb_addr); - trace_dwc3_prepare_trb(dep, trb); - ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, DWC3_DEPCMD_STARTTRANSFER, ¶ms); if (ret < 0) { @@ -311,8 +314,9 @@ void dwc3_ep0_out_start(struct dwc3 *dwc) { int ret; - ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8, + dwc3_ep0_prepare_one_trb(dwc, 0, dwc->ctrl_req_addr, 8, DWC3_TRBCTL_CONTROL_SETUP, false); + ret = dwc3_ep0_start_trans(dwc, 0); WARN_ON(ret < 0); } @@ -871,9 +875,9 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, dwc->ep0_next_event = DWC3_EP0_COMPLETE; - ret = dwc3_ep0_start_trans(dwc, epnum, - dwc->ctrl_req_addr, 0, - DWC3_TRBCTL_CONTROL_DATA, false); + dwc3_ep0_prepare_one_trb(dwc, epnum, dwc->ctrl_req_addr, + 0, DWC3_TRBCTL_CONTROL_DATA, false); + ret = dwc3_ep0_start_trans(dwc, epnum); WARN_ON(ret < 0); } } @@ -955,9 +959,10 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, req->direction = !!dep->number; if (req->request.length == 0) { - ret = dwc3_ep0_start_trans(dwc, dep->number, + dwc3_ep0_prepare_one_trb(dwc, dep->number, dwc->ctrl_req_addr, 0, DWC3_TRBCTL_CONTROL_DATA, false); + ret = dwc3_ep0_start_trans(dwc, dep->number); } else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket) && (dep->number == 0)) { u32 transfer_size = 0; @@ -975,7 +980,7 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, if (req->request.length > DWC3_EP0_BOUNCE_SIZE) { transfer_size = ALIGN(req->request.length - maxpacket, maxpacket); - ret = dwc3_ep0_start_trans(dwc, dep->number, + dwc3_ep0_prepare_one_trb(dwc, dep->number, req->request.dma, transfer_size, DWC3_TRBCTL_CONTROL_DATA, @@ -987,9 +992,10 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, dwc->ep0_bounced = true; - ret = dwc3_ep0_start_trans(dwc, dep->number, + dwc3_ep0_prepare_one_trb(dwc, dep->number, dwc->ep0_bounce_addr, transfer_size, DWC3_TRBCTL_CONTROL_DATA, false); + ret = dwc3_ep0_start_trans(dwc, dep->number); } else { ret = usb_gadget_map_request(&dwc->gadget, &req->request, dep->number); @@ -998,9 +1004,10 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, return; } - ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma, + dwc3_ep0_prepare_one_trb(dwc, dep->number, req->request.dma, req->request.length, DWC3_TRBCTL_CONTROL_DATA, false); + ret = dwc3_ep0_start_trans(dwc, dep->number); } WARN_ON(ret < 0); @@ -1014,8 +1021,9 @@ static int dwc3_ep0_start_control_status(struct dwc3_ep *dep) type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3 : DWC3_TRBCTL_CONTROL_STATUS2; - return dwc3_ep0_start_trans(dwc, dep->number, + dwc3_ep0_prepare_one_trb(dwc, dep->number, dwc->ctrl_req_addr, 0, type, false); + return dwc3_ep0_start_trans(dwc, dep->number); } static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep) diff --git a/kernel/drivers/usb/dwc3/gadget.c b/kernel/drivers/usb/dwc3/gadget.c index 69ffe6e8d..210ff6485 100644 --- a/kernel/drivers/usb/dwc3/gadget.c +++ b/kernel/drivers/usb/dwc3/gadget.c @@ -259,11 +259,11 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, if (req->request.status == -EINPROGRESS) req->request.status = status; - if (dwc->ep0_bounced && dep->number == 0) + if (dwc->ep0_bounced && dep->number <= 1) dwc->ep0_bounced = false; - else - usb_gadget_unmap_request(&dwc->gadget, &req->request, - req->direction); + + usb_gadget_unmap_request(&dwc->gadget, &req->request, + req->direction); dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n", req, dep->name, req->request.actual, @@ -1892,14 +1892,6 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, s_pkt = 1; } - /* - * We assume here we will always receive the entire data block - * which we should receive. Meaning, if we program RX to - * receive 4K but we receive only 2K, we assume that's all we - * should receive and we simply bounce the request back to the - * gadget driver for further processing. - */ - req->request.actual += req->request.length - count; if (s_pkt) return 1; if ((event->status & DEPEVT_STATUS_LST) && @@ -1919,6 +1911,7 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, struct dwc3_trb *trb; unsigned int slot; unsigned int i; + int count = 0; int ret; do { @@ -1935,6 +1928,8 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, slot++; slot %= DWC3_TRB_NUM; trb = &dep->trb_pool[slot]; + count += trb->size & DWC3_TRB_SIZE_MASK; + ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, event, status); @@ -1942,6 +1937,14 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, break; } while (++i < req->request.num_mapped_sgs); + /* + * We assume here we will always receive the entire data block + * which we should receive. Meaning, if we program RX to + * receive 4K but we receive only 2K, we assume that's all we + * should receive and we simply bounce the request back to the + * gadget driver for further processing. + */ + req->request.actual += req->request.length - count; dwc3_gadget_giveback(dep, req, status); if (ret) @@ -1965,6 +1968,10 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, return 1; } + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) + if ((event->status & DEPEVT_STATUS_IOC) && + (trb->ctrl & DWC3_TRB_CTRL_IOC)) + return 0; return 1; } @@ -2838,7 +2845,7 @@ err3: kfree(dwc->setup_buf); err2: - dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb), + dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb) * 2, dwc->ep0_trb, dwc->ep0_trb_addr); err1: @@ -2862,7 +2869,7 @@ void dwc3_gadget_exit(struct dwc3 *dwc) kfree(dwc->setup_buf); - dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb), + dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb) * 2, dwc->ep0_trb, dwc->ep0_trb_addr); dma_free_coherent(dwc->dev, sizeof(*dwc->ctrl_req), diff --git a/kernel/drivers/usb/gadget/composite.c b/kernel/drivers/usb/gadget/composite.c index 8b14c2a13..e2641d4df 100644 --- a/kernel/drivers/usb/gadget/composite.c +++ b/kernel/drivers/usb/gadget/composite.c @@ -144,11 +144,16 @@ int config_ep_by_speed(struct usb_gadget *g, ep_found: /* commit results */ - _ep->maxpacket = usb_endpoint_maxp(chosen_desc); + _ep->maxpacket = usb_endpoint_maxp(chosen_desc) & 0x7ff; _ep->desc = chosen_desc; _ep->comp_desc = NULL; _ep->maxburst = 0; - _ep->mult = 0; + _ep->mult = 1; + + if (g->speed == USB_SPEED_HIGH && (usb_endpoint_xfer_isoc(_ep->desc) || + usb_endpoint_xfer_int(_ep->desc))) + _ep->mult = ((usb_endpoint_maxp(_ep->desc) & 0x1800) >> 11) + 1; + if (!want_comp_desc) return 0; @@ -165,7 +170,7 @@ ep_found: switch (usb_endpoint_type(_ep->desc)) { case USB_ENDPOINT_XFER_ISOC: /* mult: bits 1:0 of bmAttributes */ - _ep->mult = comp_desc->bmAttributes & 0x3; + _ep->mult = (comp_desc->bmAttributes & 0x3) + 1; case USB_ENDPOINT_XFER_BULK: case USB_ENDPOINT_XFER_INT: _ep->maxburst = comp_desc->bMaxBurst + 1; @@ -1596,9 +1601,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) value = min(w_length, (u16) 1); break; - /* function drivers must handle get/set altsetting; if there's - * no get() method, we know only altsetting zero works. - */ + /* function drivers must handle get/set altsetting */ case USB_REQ_SET_INTERFACE: if (ctrl->bRequestType != USB_RECIP_INTERFACE) goto unknown; @@ -1607,7 +1610,13 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) f = cdev->config->interface[intf]; if (!f) break; - if (w_value && !f->set_alt) + + /* + * If there's no get_alt() method, we know only altsetting zero + * works. There is no need to check if set_alt() is not NULL + * as we check this in usb_add_function(). + */ + if (w_value && !f->get_alt) break; value = f->set_alt(f, w_index, w_value); if (value == USB_GADGET_DELAYED_STATUS) { diff --git a/kernel/drivers/usb/gadget/function/f_fs.c b/kernel/drivers/usb/gadget/function/f_fs.c index 4d475284a..65ccffba7 100644 --- a/kernel/drivers/usb/gadget/function/f_fs.c +++ b/kernel/drivers/usb/gadget/function/f_fs.c @@ -646,24 +646,23 @@ static void ffs_user_copy_worker(struct work_struct *work) work); int ret = io_data->req->status ? io_data->req->status : io_data->req->actual; + bool kiocb_has_eventfd = io_data->kiocb->ki_flags & IOCB_EVENTFD; if (io_data->read && ret > 0) { use_mm(io_data->mm); ret = copy_to_iter(io_data->buf, ret, &io_data->data); - if (iov_iter_count(&io_data->data)) + if (ret != io_data->req->actual && iov_iter_count(&io_data->data)) ret = -EFAULT; unuse_mm(io_data->mm); } io_data->kiocb->ki_complete(io_data->kiocb, ret, ret); - if (io_data->ffs->ffs_eventfd && - !(io_data->kiocb->ki_flags & IOCB_EVENTFD)) + if (io_data->ffs->ffs_eventfd && !kiocb_has_eventfd) eventfd_signal(io_data->ffs->ffs_eventfd, 1); usb_ep_free_request(io_data->ep, io_data->req); - io_data->kiocb->private = NULL; if (io_data->read) kfree(io_data->to_free); kfree(io_data->buf); @@ -2080,6 +2079,8 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type, if (len < sizeof(*d) || h->interface >= ffs->interfaces_count) return -EINVAL; length = le32_to_cpu(d->dwSize); + if (len < length) + return -EINVAL; type = le32_to_cpu(d->dwPropertyDataType); if (type < USB_EXT_PROP_UNICODE || type > USB_EXT_PROP_UNICODE_MULTI) { @@ -2088,6 +2089,11 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type, return -EINVAL; } pnl = le16_to_cpu(d->wPropertyNameLength); + if (length < 14 + pnl) { + pr_vdebug("invalid os descriptor length: %d pnl:%d (descriptor %d)\n", + length, pnl, type); + return -EINVAL; + } pdl = le32_to_cpu(*(u32 *)((u8 *)data + 10 + pnl)); if (length != 14 + pnl + pdl) { pr_vdebug("invalid os descriptor length: %d pnl:%d pdl:%d (descriptor %d)\n", @@ -2172,6 +2178,9 @@ static int __ffs_data_got_descs(struct ffs_data *ffs, } } if (flags & (1 << i)) { + if (len < 4) { + goto error; + } os_descs_count = get_unaligned_le32(data); data += 4; len -= 4; @@ -2244,7 +2253,8 @@ static int __ffs_data_got_strings(struct ffs_data *ffs, ENTER(); - if (unlikely(get_unaligned_le32(data) != FUNCTIONFS_STRINGS_MAGIC || + if (unlikely(len < 16 || + get_unaligned_le32(data) != FUNCTIONFS_STRINGS_MAGIC || get_unaligned_le32(data + 4) != len)) goto error; str_count = get_unaligned_le32(data + 8); @@ -2741,6 +2751,7 @@ static int _ffs_func_bind(struct usb_configuration *c, func->ffs->ss_descs_count; int fs_len, hs_len, ss_len, ret, i; + struct ffs_ep *eps_ptr; /* Make it a single chunk, less management later on */ vla_group(d); @@ -2789,12 +2800,9 @@ static int _ffs_func_bind(struct usb_configuration *c, ffs->raw_descs_length); memset(vla_ptr(vlabuf, d, inums), 0xff, d_inums__sz); - for (ret = ffs->eps_count; ret; --ret) { - struct ffs_ep *ptr; - - ptr = vla_ptr(vlabuf, d, eps); - ptr[ret].num = -1; - } + eps_ptr = vla_ptr(vlabuf, d, eps); + for (i = 0; i < ffs->eps_count; i++) + eps_ptr[i].num = -1; /* Save pointers * d_eps == vlabuf, func->eps used to kfree vlabuf later diff --git a/kernel/drivers/usb/gadget/function/f_mass_storage.c b/kernel/drivers/usb/gadget/function/f_mass_storage.c index 223ccf89d..a4f664062 100644 --- a/kernel/drivers/usb/gadget/function/f_mass_storage.c +++ b/kernel/drivers/usb/gadget/function/f_mass_storage.c @@ -2977,25 +2977,6 @@ void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn, } EXPORT_SYMBOL_GPL(fsg_common_set_inquiry_string); -int fsg_common_run_thread(struct fsg_common *common) -{ - common->state = FSG_STATE_IDLE; - /* Tell the thread to start working */ - common->thread_task = - kthread_create(fsg_main_thread, common, "file-storage"); - if (IS_ERR(common->thread_task)) { - common->state = FSG_STATE_TERMINATED; - return PTR_ERR(common->thread_task); - } - - DBG(common, "I/O thread pid: %d\n", task_pid_nr(common->thread_task)); - - wake_up_process(common->thread_task); - - return 0; -} -EXPORT_SYMBOL_GPL(fsg_common_run_thread); - static void fsg_common_release(struct kref *ref) { struct fsg_common *common = container_of(ref, struct fsg_common, ref); @@ -3005,6 +2986,7 @@ static void fsg_common_release(struct kref *ref) if (common->state != FSG_STATE_TERMINATED) { raise_exception(common, FSG_STATE_EXIT); wait_for_completion(&common->thread_notifier); + common->thread_task = NULL; } for (i = 0; i < ARRAY_SIZE(common->luns); ++i) { @@ -3050,9 +3032,21 @@ static int fsg_bind(struct usb_configuration *c, struct usb_function *f) if (ret) return ret; fsg_common_set_inquiry_string(fsg->common, NULL, NULL); - ret = fsg_common_run_thread(fsg->common); - if (ret) + } + + if (!common->thread_task) { + common->state = FSG_STATE_IDLE; + common->thread_task = + kthread_create(fsg_main_thread, common, "file-storage"); + if (IS_ERR(common->thread_task)) { + int ret = PTR_ERR(common->thread_task); + common->thread_task = NULL; + common->state = FSG_STATE_TERMINATED; return ret; + } + DBG(common, "I/O thread pid: %d\n", + task_pid_nr(common->thread_task)); + wake_up_process(common->thread_task); } fsg->gadget = gadget; diff --git a/kernel/drivers/usb/gadget/function/f_mass_storage.h b/kernel/drivers/usb/gadget/function/f_mass_storage.h index 445df6775..b6a9918ea 100644 --- a/kernel/drivers/usb/gadget/function/f_mass_storage.h +++ b/kernel/drivers/usb/gadget/function/f_mass_storage.h @@ -153,8 +153,6 @@ int fsg_common_create_luns(struct fsg_common *common, struct fsg_config *cfg); void fsg_common_set_inquiry_string(struct fsg_common *common, const char *vn, const char *pn); -int fsg_common_run_thread(struct fsg_common *common); - void fsg_config_from_params(struct fsg_config *cfg, const struct fsg_module_parameters *params, unsigned int fsg_num_buffers); diff --git a/kernel/drivers/usb/gadget/function/f_uac2.c b/kernel/drivers/usb/gadget/function/f_uac2.c index 044ca79d3..12064d3bd 100644 --- a/kernel/drivers/usb/gadget/function/f_uac2.c +++ b/kernel/drivers/usb/gadget/function/f_uac2.c @@ -1079,13 +1079,13 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) agdev->out_ep = usb_ep_autoconfig(gadget, &fs_epout_desc); if (!agdev->out_ep) { dev_err(dev, "%s:%d Error!\n", __func__, __LINE__); - goto err; + return ret; } agdev->in_ep = usb_ep_autoconfig(gadget, &fs_epin_desc); if (!agdev->in_ep) { dev_err(dev, "%s:%d Error!\n", __func__, __LINE__); - goto err; + return ret; } uac2->p_prm.uac2 = uac2; @@ -1102,7 +1102,7 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) ret = usb_assign_descriptors(fn, fs_audio_desc, hs_audio_desc, NULL); if (ret) - goto err; + return ret; prm = &agdev->uac2.c_prm; prm->max_psize = hs_epout_desc.wMaxPacketSize; @@ -1117,19 +1117,19 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) prm->rbuf = kzalloc(prm->max_psize * USB_XFERS, GFP_KERNEL); if (!prm->rbuf) { prm->max_psize = 0; - goto err_free_descs; + goto err; } ret = alsa_uac2_init(agdev); if (ret) - goto err_free_descs; + goto err; return 0; -err_free_descs: - usb_free_all_descriptors(fn); err: kfree(agdev->uac2.p_prm.rbuf); kfree(agdev->uac2.c_prm.rbuf); +err_free_descs: + usb_free_all_descriptors(fn); return -EINVAL; } @@ -1291,6 +1291,7 @@ in_rq_cur(struct usb_function *fn, const struct usb_ctrlrequest *cr) if (control_selector == UAC2_CS_CONTROL_SAM_FREQ) { struct cntrl_cur_lay3 c; + memset(&c, 0, sizeof(struct cntrl_cur_lay3)); if (entity_id == USB_IN_CLK_ID) c.dCUR = p_srate; diff --git a/kernel/drivers/usb/gadget/function/u_ether.c b/kernel/drivers/usb/gadget/function/u_ether.c index 6554322af..7413f8966 100644 --- a/kernel/drivers/usb/gadget/function/u_ether.c +++ b/kernel/drivers/usb/gadget/function/u_ether.c @@ -594,13 +594,6 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb, req->length = length; - /* throttle high/super speed IRQ rate back slightly */ - if (gadget_is_dualspeed(dev->gadget)) - req->no_interrupt = (dev->gadget->speed == USB_SPEED_HIGH || - dev->gadget->speed == USB_SPEED_SUPER) - ? ((atomic_read(&dev->tx_qlen) % dev->qmult) != 0) - : 0; - retval = usb_ep_queue(in, req, GFP_ATOMIC); switch (retval) { default: diff --git a/kernel/drivers/usb/gadget/function/uvc_video.c b/kernel/drivers/usb/gadget/function/uvc_video.c index 3d0d5d94a..0f01c04d7 100644 --- a/kernel/drivers/usb/gadget/function/uvc_video.c +++ b/kernel/drivers/usb/gadget/function/uvc_video.c @@ -243,7 +243,7 @@ uvc_video_alloc_requests(struct uvc_video *video) req_size = video->ep->maxpacket * max_t(unsigned int, video->ep->maxburst, 1) - * (video->ep->mult + 1); + * (video->ep->mult); for (i = 0; i < UVC_NUM_REQUESTS; ++i) { video->req_buffer[i] = kmalloc(req_size, GFP_KERNEL); diff --git a/kernel/drivers/usb/gadget/legacy/acm_ms.c b/kernel/drivers/usb/gadget/legacy/acm_ms.c index 4b158e2d1..64b2cbb0b 100644 --- a/kernel/drivers/usb/gadget/legacy/acm_ms.c +++ b/kernel/drivers/usb/gadget/legacy/acm_ms.c @@ -133,10 +133,6 @@ static int acm_ms_do_config(struct usb_configuration *c) if (status < 0) goto put_msg; - status = fsg_common_run_thread(opts->common); - if (status) - goto remove_acm; - status = usb_add_function(c, f_msg); if (status) goto remove_acm; diff --git a/kernel/drivers/usb/gadget/legacy/inode.c b/kernel/drivers/usb/gadget/legacy/inode.c index b20a60343..e52700c75 100644 --- a/kernel/drivers/usb/gadget/legacy/inode.c +++ b/kernel/drivers/usb/gadget/legacy/inode.c @@ -541,7 +541,7 @@ static ssize_t ep_aio(struct kiocb *iocb, */ spin_lock_irq(&epdata->dev->lock); value = -ENODEV; - if (unlikely(epdata->ep)) + if (unlikely(epdata->ep == NULL)) goto fail; req = usb_ep_alloc_request(epdata->ep, GFP_ATOMIC); @@ -937,8 +937,11 @@ ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr) struct usb_ep *ep = dev->gadget->ep0; struct usb_request *req = dev->req; - if ((retval = setup_req (ep, req, 0)) == 0) - retval = usb_ep_queue (ep, req, GFP_ATOMIC); + if ((retval = setup_req (ep, req, 0)) == 0) { + spin_unlock_irq (&dev->lock); + retval = usb_ep_queue (ep, req, GFP_KERNEL); + spin_lock_irq (&dev->lock); + } dev->state = STATE_DEV_CONNECTED; /* assume that was SET_CONFIGURATION */ @@ -1122,7 +1125,7 @@ ep0_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) /* data and/or status stage for control request */ } else if (dev->state == STATE_DEV_SETUP) { - /* IN DATA+STATUS caller makes len <= wLength */ + len = min_t(size_t, len, dev->setup_wLength); if (dev->setup_in) { retval = setup_req (dev->gadget->ep0, dev->req, len); if (retval == 0) { @@ -1456,8 +1459,11 @@ delegate: w_length); if (value < 0) break; + + spin_unlock (&dev->lock); value = usb_ep_queue (gadget->ep0, dev->req, - GFP_ATOMIC); + GFP_KERNEL); + spin_lock (&dev->lock); if (value < 0) { clean_req (gadget->ep0, dev->req); break; @@ -1480,11 +1486,14 @@ delegate: if (value >= 0 && dev->state != STATE_DEV_SETUP) { req->length = value; req->zero = value < w_length; - value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); + + spin_unlock (&dev->lock); + value = usb_ep_queue (gadget->ep0, req, GFP_KERNEL); if (value < 0) { DBG (dev, "ep_queue --> %d\n", value); req->status = 0; } + return value; } /* device stalls when value < 0 */ @@ -1746,10 +1755,12 @@ static struct usb_gadget_driver probe_driver = { * such as configuration notifications. */ -static int is_valid_config (struct usb_config_descriptor *config) +static int is_valid_config(struct usb_config_descriptor *config, + unsigned int total) { return config->bDescriptorType == USB_DT_CONFIG && config->bLength == USB_DT_CONFIG_SIZE + && total >= USB_DT_CONFIG_SIZE && config->bConfigurationValue != 0 && (config->bmAttributes & USB_CONFIG_ATT_ONE) != 0 && (config->bmAttributes & USB_CONFIG_ATT_WAKEUP) == 0; @@ -1774,7 +1785,8 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) } spin_unlock_irq(&dev->lock); - if (len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4)) + if ((len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4)) || + (len > PAGE_SIZE * 4)) return -EINVAL; /* we might need to change message format someday */ @@ -1798,7 +1810,8 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) /* full or low speed config */ dev->config = (void *) kbuf; total = le16_to_cpu(dev->config->wTotalLength); - if (!is_valid_config (dev->config) || total >= length) + if (!is_valid_config(dev->config, total) || + total > length - USB_DT_DEVICE_SIZE) goto fail; kbuf += total; length -= total; @@ -1807,10 +1820,13 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) if (kbuf [1] == USB_DT_CONFIG) { dev->hs_config = (void *) kbuf; total = le16_to_cpu(dev->hs_config->wTotalLength); - if (!is_valid_config (dev->hs_config) || total >= length) + if (!is_valid_config(dev->hs_config, total) || + total > length - USB_DT_DEVICE_SIZE) goto fail; kbuf += total; length -= total; + } else { + dev->hs_config = NULL; } /* could support multiple configs, using another encoding! */ diff --git a/kernel/drivers/usb/gadget/legacy/mass_storage.c b/kernel/drivers/usb/gadget/legacy/mass_storage.c index bda3c5191..99aa22c81 100644 --- a/kernel/drivers/usb/gadget/legacy/mass_storage.c +++ b/kernel/drivers/usb/gadget/legacy/mass_storage.c @@ -132,10 +132,6 @@ static int msg_do_config(struct usb_configuration *c) if (IS_ERR(f_msg)) return PTR_ERR(f_msg); - ret = fsg_common_run_thread(opts->common); - if (ret) - goto put_func; - ret = usb_add_function(c, f_msg); if (ret) goto put_func; diff --git a/kernel/drivers/usb/gadget/legacy/multi.c b/kernel/drivers/usb/gadget/legacy/multi.c index 4fe794ddc..09c7c28f3 100644 --- a/kernel/drivers/usb/gadget/legacy/multi.c +++ b/kernel/drivers/usb/gadget/legacy/multi.c @@ -137,7 +137,6 @@ static struct usb_function *f_msg_rndis; static int rndis_do_config(struct usb_configuration *c) { - struct fsg_opts *fsg_opts; int ret; if (gadget_is_otg(c->cdev->gadget)) { @@ -169,11 +168,6 @@ static int rndis_do_config(struct usb_configuration *c) goto err_fsg; } - fsg_opts = fsg_opts_from_func_inst(fi_msg); - ret = fsg_common_run_thread(fsg_opts->common); - if (ret) - goto err_run; - ret = usb_add_function(c, f_msg_rndis); if (ret) goto err_run; @@ -225,7 +219,6 @@ static struct usb_function *f_msg_multi; static int cdc_do_config(struct usb_configuration *c) { - struct fsg_opts *fsg_opts; int ret; if (gadget_is_otg(c->cdev->gadget)) { @@ -258,11 +251,6 @@ static int cdc_do_config(struct usb_configuration *c) goto err_fsg; } - fsg_opts = fsg_opts_from_func_inst(fi_msg); - ret = fsg_common_run_thread(fsg_opts->common); - if (ret) - goto err_run; - ret = usb_add_function(c, f_msg_multi); if (ret) goto err_run; diff --git a/kernel/drivers/usb/gadget/legacy/nokia.c b/kernel/drivers/usb/gadget/legacy/nokia.c index 8b3f6fb18..05d3f79e7 100644 --- a/kernel/drivers/usb/gadget/legacy/nokia.c +++ b/kernel/drivers/usb/gadget/legacy/nokia.c @@ -152,7 +152,6 @@ static int nokia_bind_config(struct usb_configuration *c) struct usb_function *f_ecm; struct usb_function *f_obex2 = NULL; struct usb_function *f_msg; - struct fsg_opts *fsg_opts; int status = 0; int obex1_stat = -1; int obex2_stat = -1; @@ -222,12 +221,6 @@ static int nokia_bind_config(struct usb_configuration *c) goto err_ecm; } - fsg_opts = fsg_opts_from_func_inst(fi_msg); - - status = fsg_common_run_thread(fsg_opts->common); - if (status) - goto err_msg; - status = usb_add_function(c, f_msg); if (status) goto err_msg; diff --git a/kernel/drivers/usb/gadget/udc/dummy_hcd.c b/kernel/drivers/usb/gadget/udc/dummy_hcd.c index dde44450d..22d067cd5 100644 --- a/kernel/drivers/usb/gadget/udc/dummy_hcd.c +++ b/kernel/drivers/usb/gadget/udc/dummy_hcd.c @@ -330,7 +330,7 @@ static void nuke(struct dummy *dum, struct dummy_ep *ep) /* caller must hold lock */ static void stop_activity(struct dummy *dum) { - struct dummy_ep *ep; + int i; /* prevent any more requests */ dum->address = 0; @@ -338,8 +338,8 @@ static void stop_activity(struct dummy *dum) /* The timer is left running so that outstanding URBs can fail */ /* nuke any pending requests first, so driver i/o is quiesced */ - list_for_each_entry(ep, &dum->gadget.ep_list, ep.ep_list) - nuke(dum, ep); + for (i = 0; i < DUMMY_ENDPOINTS; ++i) + nuke(dum, &dum->ep[i]); /* driver now does any non-usb quiescing necessary */ } diff --git a/kernel/drivers/usb/gadget/udc/fsl_qe_udc.c b/kernel/drivers/usb/gadget/udc/fsl_qe_udc.c index 5fb6f8b4f..b38a33584 100644 --- a/kernel/drivers/usb/gadget/udc/fsl_qe_udc.c +++ b/kernel/drivers/usb/gadget/udc/fsl_qe_udc.c @@ -1878,11 +1878,8 @@ static int qe_get_frame(struct usb_gadget *gadget) tmp = in_be16(&udc->usb_param->frame_n); if (tmp & 0x8000) - tmp = tmp & 0x07ff; - else - tmp = -EINVAL; - - return (int)tmp; + return tmp & 0x07ff; + return -EINVAL; } static int fsl_qe_start(struct usb_gadget *gadget, @@ -2053,7 +2050,7 @@ static void setup_received_handle(struct qe_udc *udc, struct qe_ep *ep; if (wValue != 0 || wLength != 0 - || pipe > USB_MAX_ENDPOINTS) + || pipe >= USB_MAX_ENDPOINTS) break; ep = &udc->eps[pipe]; diff --git a/kernel/drivers/usb/gadget/udc/udc-core.c b/kernel/drivers/usb/gadget/udc/udc-core.c index f660afba7..89f7cd66f 100644 --- a/kernel/drivers/usb/gadget/udc/udc-core.c +++ b/kernel/drivers/usb/gadget/udc/udc-core.c @@ -71,7 +71,7 @@ int usb_gadget_map_request(struct usb_gadget *gadget, mapped = dma_map_sg(dev, req->sg, req->num_sgs, is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); if (mapped == 0) { - dev_err(&gadget->dev, "failed to map SGs\n"); + dev_err(dev, "failed to map SGs\n"); return -EFAULT; } diff --git a/kernel/drivers/usb/host/ehci-hcd.c b/kernel/drivers/usb/host/ehci-hcd.c index 48c92bf78..f7661d975 100644 --- a/kernel/drivers/usb/host/ehci-hcd.c +++ b/kernel/drivers/usb/host/ehci-hcd.c @@ -332,11 +332,11 @@ static void ehci_turn_off_all_ports(struct ehci_hcd *ehci) int port = HCS_N_PORTS(ehci->hcs_params); while (port--) { - ehci_writel(ehci, PORT_RWC_BITS, - &ehci->regs->port_status[port]); spin_unlock_irq(&ehci->lock); ehci_port_power(ehci, port, false); spin_lock_irq(&ehci->lock); + ehci_writel(ehci, PORT_RWC_BITS, + &ehci->regs->port_status[port]); } } diff --git a/kernel/drivers/usb/host/ehci-tegra.c b/kernel/drivers/usb/host/ehci-tegra.c index 4031b3720..c1c1024a0 100644 --- a/kernel/drivers/usb/host/ehci-tegra.c +++ b/kernel/drivers/usb/host/ehci-tegra.c @@ -89,7 +89,7 @@ static int tegra_reset_usb_controller(struct platform_device *pdev) if (!usb1_reset_attempted) { struct reset_control *usb1_reset; - usb1_reset = of_reset_control_get(phy_np, "usb"); + usb1_reset = of_reset_control_get(phy_np, "utmi-pads"); if (IS_ERR(usb1_reset)) { dev_warn(&pdev->dev, "can't get utmi-pads reset from the PHY\n"); diff --git a/kernel/drivers/usb/host/ohci-hcd.c b/kernel/drivers/usb/host/ohci-hcd.c index 760cb57e9..9d1192aea 100644 --- a/kernel/drivers/usb/host/ohci-hcd.c +++ b/kernel/drivers/usb/host/ohci-hcd.c @@ -72,7 +72,7 @@ static const char hcd_name [] = "ohci_hcd"; #define STATECHANGE_DELAY msecs_to_jiffies(300) -#define IO_WATCHDOG_DELAY msecs_to_jiffies(250) +#define IO_WATCHDOG_DELAY msecs_to_jiffies(275) #include "ohci.h" #include "pci-quirks.h" diff --git a/kernel/drivers/usb/host/ohci-q.c b/kernel/drivers/usb/host/ohci-q.c index d029bbe9e..641fed609 100644 --- a/kernel/drivers/usb/host/ohci-q.c +++ b/kernel/drivers/usb/host/ohci-q.c @@ -183,7 +183,6 @@ static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed) { int branch; - ed->state = ED_OPER; ed->ed_prev = NULL; ed->ed_next = NULL; ed->hwNextED = 0; @@ -259,6 +258,8 @@ static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed) /* the HC may not see the schedule updates yet, but if it does * then they'll be properly ordered. */ + + ed->state = ED_OPER; return 0; } diff --git a/kernel/drivers/usb/host/uhci-pci.c b/kernel/drivers/usb/host/uhci-pci.c index 940304c33..02260cfde 100644 --- a/kernel/drivers/usb/host/uhci-pci.c +++ b/kernel/drivers/usb/host/uhci-pci.c @@ -129,6 +129,10 @@ static int uhci_pci_init(struct usb_hcd *hcd) if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_HP) uhci->wait_for_hp = 1; + /* Intel controllers use non-PME wakeup signalling */ + if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_INTEL) + device_set_run_wake(uhci_dev(uhci), 1); + /* Set up pointers to PCI-specific functions */ uhci->reset_hc = uhci_pci_reset_hc; uhci->check_and_reset_hc = uhci_pci_check_and_reset_hc; diff --git a/kernel/drivers/usb/host/xhci-hub.c b/kernel/drivers/usb/host/xhci-hub.c index f980c239e..e9675e8f0 100644 --- a/kernel/drivers/usb/host/xhci-hub.c +++ b/kernel/drivers/usb/host/xhci-hub.c @@ -377,6 +377,9 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) ret = 0; virt_dev = xhci->devs[slot_id]; + if (!virt_dev) + return -ENODEV; + cmd = xhci_alloc_command(xhci, false, true, GFP_NOIO); if (!cmd) { xhci_dbg(xhci, "Couldn't allocate command structure.\n"); @@ -1154,7 +1157,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_set_link_state(xhci, port_array, wIndex, XDEV_RESUME); spin_unlock_irqrestore(&xhci->lock, flags); - msleep(20); + msleep(USB_RESUME_TIMEOUT); spin_lock_irqsave(&xhci->lock, flags); xhci_set_link_state(xhci, port_array, wIndex, XDEV_U0); @@ -1343,6 +1346,35 @@ int xhci_bus_suspend(struct usb_hcd *hcd) return 0; } +/* + * Workaround for missing Cold Attach Status (CAS) if device re-plugged in S3. + * warm reset a USB3 device stuck in polling or compliance mode after resume. + * See Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8 + */ +static bool xhci_port_missing_cas_quirk(int port_index, + __le32 __iomem **port_array) +{ + u32 portsc; + + portsc = readl(port_array[port_index]); + + /* if any of these are set we are not stuck */ + if (portsc & (PORT_CONNECT | PORT_CAS)) + return false; + + if (((portsc & PORT_PLS_MASK) != XDEV_POLLING) && + ((portsc & PORT_PLS_MASK) != XDEV_COMP_MODE)) + return false; + + /* clear wakeup/change bits, and do a warm port reset */ + portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); + portsc |= PORT_WR; + writel(portsc, port_array[port_index]); + /* flush write */ + readl(port_array[port_index]); + return true; +} + int xhci_bus_resume(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); @@ -1380,6 +1412,14 @@ int xhci_bus_resume(struct usb_hcd *hcd) u32 temp; temp = readl(port_array[port_index]); + + /* warm reset CAS limited ports stuck in polling/compliance */ + if ((xhci->quirks & XHCI_MISSING_CAS) && + (hcd->speed >= HCD_USB3) && + xhci_port_missing_cas_quirk(port_index, port_array)) { + xhci_dbg(xhci, "reset stuck port %d\n", port_index); + continue; + } if (DEV_SUPERSPEED_ANY(temp)) temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); else @@ -1398,7 +1438,7 @@ int xhci_bus_resume(struct usb_hcd *hcd) if (need_usb2_u3_exit) { spin_unlock_irqrestore(&xhci->lock, flags); - msleep(20); + msleep(USB_RESUME_TIMEOUT); spin_lock_irqsave(&xhci->lock, flags); } diff --git a/kernel/drivers/usb/host/xhci-mem.c b/kernel/drivers/usb/host/xhci-mem.c index c48cbe731..998a738e6 100644 --- a/kernel/drivers/usb/host/xhci-mem.c +++ b/kernel/drivers/usb/host/xhci-mem.c @@ -964,6 +964,40 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) xhci->devs[slot_id] = NULL; } +/* + * Free a virt_device structure. + * If the virt_device added a tt_info (a hub) and has children pointing to + * that tt_info, then free the child first. Recursive. + * We can't rely on udev at this point to find child-parent relationships. + */ +void xhci_free_virt_devices_depth_first(struct xhci_hcd *xhci, int slot_id) +{ + struct xhci_virt_device *vdev; + struct list_head *tt_list_head; + struct xhci_tt_bw_info *tt_info, *next; + int i; + + vdev = xhci->devs[slot_id]; + if (!vdev) + return; + + tt_list_head = &(xhci->rh_bw[vdev->real_port - 1].tts); + list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) { + /* is this a hub device that added a tt_info to the tts list */ + if (tt_info->slot_id == slot_id) { + /* are any devices using this tt_info? */ + for (i = 1; i < HCS_MAX_SLOTS(xhci->hcs_params1); i++) { + vdev = xhci->devs[i]; + if (vdev && (vdev->tt_info == tt_info)) + xhci_free_virt_devices_depth_first( + xhci, i); + } + } + } + /* we are now at a leaf device */ + xhci_free_virt_device(xhci, slot_id); +} + int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags) { @@ -1072,7 +1106,7 @@ static u32 xhci_find_real_port_number(struct xhci_hcd *xhci, struct usb_device *top_dev; struct usb_hcd *hcd; - if (udev->speed == USB_SPEED_SUPER) + if (udev->speed >= USB_SPEED_SUPER) hcd = xhci->shared_hcd; else hcd = xhci->main_hcd; @@ -1107,6 +1141,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud /* 3) Only the control endpoint is valid - one endpoint context */ slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | udev->route); switch (udev->speed) { + case USB_SPEED_SUPER_PLUS: case USB_SPEED_SUPER: slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_SS); max_packets = MAX_PACKET(512); @@ -1294,6 +1329,7 @@ static unsigned int xhci_get_endpoint_interval(struct usb_device *udev, } /* Fall through - SS and HS isoc/int have same decoding */ + case USB_SPEED_SUPER_PLUS: case USB_SPEED_SUPER: if (usb_endpoint_xfer_int(&ep->desc) || usb_endpoint_xfer_isoc(&ep->desc)) { @@ -1334,7 +1370,7 @@ static unsigned int xhci_get_endpoint_interval(struct usb_device *udev, static u32 xhci_get_endpoint_mult(struct usb_device *udev, struct usb_host_endpoint *ep) { - if (udev->speed != USB_SPEED_SUPER || + if (udev->speed < USB_SPEED_SUPER || !usb_endpoint_xfer_isoc(&ep->desc)) return 0; return ep->ss_ep_comp.bmAttributes; @@ -1384,7 +1420,7 @@ static u32 xhci_get_max_esit_payload(struct usb_device *udev, usb_endpoint_xfer_bulk(&ep->desc)) return 0; - if (udev->speed == USB_SPEED_SUPER) + if (udev->speed >= USB_SPEED_SUPER) return le16_to_cpu(ep->ss_ep_comp.wBytesPerInterval); max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc)); @@ -1455,6 +1491,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc)); max_burst = 0; switch (udev->speed) { + case USB_SPEED_SUPER_PLUS: case USB_SPEED_SUPER: /* dig out max burst from ep companion desc */ max_burst = ep->ss_ep_comp.bMaxBurst; @@ -1792,7 +1829,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) int size; int i, j, num_ports; - del_timer_sync(&xhci->cmd_timer); + cancel_delayed_work_sync(&xhci->cmd_timer); /* Free the Event Ring Segment Table and the actual Event Ring */ size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); @@ -1825,8 +1862,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } } - for (i = 1; i < MAX_HC_SLOTS; ++i) - xhci_free_virt_device(xhci, i); + for (i = HCS_MAX_SLOTS(xhci->hcs_params1); i > 0; i--) + xhci_free_virt_devices_depth_first(xhci, i); dma_pool_destroy(xhci->segment_pool); xhci->segment_pool = NULL; @@ -1875,6 +1912,12 @@ no_bw: kfree(xhci->rh_bw); kfree(xhci->ext_caps); + xhci->usb2_ports = NULL; + xhci->usb3_ports = NULL; + xhci->port_array = NULL; + xhci->rh_bw = NULL; + xhci->ext_caps = NULL; + xhci->page_size = 0; xhci->page_shift = 0; xhci->bus_state[0].bus_suspended = 0; @@ -2352,9 +2395,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) INIT_LIST_HEAD(&xhci->cmd_list); - /* init command timeout timer */ - setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout, - (unsigned long)xhci); + /* init command timeout work */ + INIT_DELAYED_WORK(&xhci->cmd_timer, xhci_handle_command_timeout); + init_completion(&xhci->cmd_ring_stop_completion); page_size = readl(&xhci->op_regs->page_size); xhci_dbg_trace(xhci, trace_xhci_dbg_init, @@ -2393,7 +2436,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) * "physically contiguous and 64-byte (cache line) aligned". */ xhci->dcbaa = dma_alloc_coherent(dev, sizeof(*xhci->dcbaa), &dma, - GFP_KERNEL); + flags); if (!xhci->dcbaa) goto fail; memset(xhci->dcbaa, 0, sizeof *(xhci->dcbaa)); @@ -2489,7 +2532,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) xhci->erst.entries = dma_alloc_coherent(dev, sizeof(struct xhci_erst_entry) * ERST_NUM_SEGS, &dma, - GFP_KERNEL); + flags); if (!xhci->erst.entries) goto fail; xhci_dbg_trace(xhci, trace_xhci_dbg_init, diff --git a/kernel/drivers/usb/host/xhci-pci.c b/kernel/drivers/usb/host/xhci-pci.c index c2d65206e..dd262f418 100644 --- a/kernel/drivers/usb/host/xhci-pci.c +++ b/kernel/drivers/usb/host/xhci-pci.c @@ -37,6 +37,7 @@ /* Device for a quirk */ #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 +#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009 0x1009 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400 #define PCI_VENDOR_ID_ETRON 0x1b6f @@ -44,10 +45,13 @@ #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31 +#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI 0x9cb1 #define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI 0x22b5 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI 0xa12f #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f #define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8 +#define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8 +#define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8 static const char hcd_name[] = "xhci_hcd"; @@ -114,6 +118,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_TRUST_TX_LENGTH; } + if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && + pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009) + xhci->quirks |= XHCI_BROKEN_STREAMS; + if (pdev->vendor == PCI_VENDOR_ID_NEC) xhci->quirks |= XHCI_NEC_HOST; @@ -148,7 +156,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_SPURIOUS_REBOOT; } if (pdev->vendor == PCI_VENDOR_ID_INTEL && - pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) { + (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI)) { xhci->quirks |= XHCI_SPURIOUS_REBOOT; xhci->quirks |= XHCI_SPURIOUS_WAKEUP; } @@ -156,9 +165,16 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) (pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || - pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI)) { + pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) { xhci->quirks |= XHCI_PME_STUCK_QUIRK; } + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) + xhci->quirks |= XHCI_MISSING_CAS; + if (pdev->vendor == PCI_VENDOR_ID_ETRON && pdev->device == PCI_DEVICE_ID_EJ168) { xhci->quirks |= XHCI_RESET_ON_RESUME; @@ -299,15 +315,17 @@ static void xhci_pci_remove(struct pci_dev *dev) struct xhci_hcd *xhci; xhci = hcd_to_xhci(pci_get_drvdata(dev)); + xhci->xhc_state |= XHCI_STATE_REMOVING; if (xhci->shared_hcd) { usb_remove_hcd(xhci->shared_hcd); usb_put_hcd(xhci->shared_hcd); } - usb_hcd_pci_remove(dev); /* Workaround for spurious wakeups at shutdown with HSW */ if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) pci_set_power_state(dev, PCI_D3hot); + + usb_hcd_pci_remove(dev); } #ifdef CONFIG_PM diff --git a/kernel/drivers/usb/host/xhci-plat.c b/kernel/drivers/usb/host/xhci-plat.c index 05647e675..4fe7c9b56 100644 --- a/kernel/drivers/usb/host/xhci-plat.c +++ b/kernel/drivers/usb/host/xhci-plat.c @@ -132,6 +132,9 @@ static int xhci_plat_probe(struct platform_device *pdev) ret = clk_prepare_enable(clk); if (ret) goto put_hcd; + } else if (PTR_ERR(clk) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto put_hcd; } if (of_device_is_compatible(pdev->dev.of_node, diff --git a/kernel/drivers/usb/host/xhci-ring.c b/kernel/drivers/usb/host/xhci-ring.c index db0f0831b..de7dce6eb 100644 --- a/kernel/drivers/usb/host/xhci-ring.c +++ b/kernel/drivers/usb/host/xhci-ring.c @@ -280,15 +280,76 @@ void xhci_ring_cmd_db(struct xhci_hcd *xhci) readl(&xhci->dba->doorbell[0]); } -static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) +static bool xhci_mod_cmd_timer(struct xhci_hcd *xhci, unsigned long delay) +{ + return mod_delayed_work(system_wq, &xhci->cmd_timer, delay); +} + +static struct xhci_command *xhci_next_queued_cmd(struct xhci_hcd *xhci) +{ + return list_first_entry_or_null(&xhci->cmd_list, struct xhci_command, + cmd_list); +} + +/* + * Turn all commands on command ring with status set to "aborted" to no-op trbs. + * If there are other commands waiting then restart the ring and kick the timer. + * This must be called with command ring stopped and xhci->lock held. + */ +static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci, + struct xhci_command *cur_cmd) +{ + struct xhci_command *i_cmd; + u32 cycle_state; + + /* Turn all aborted commands in list to no-ops, then restart */ + list_for_each_entry(i_cmd, &xhci->cmd_list, cmd_list) { + + if (i_cmd->status != COMP_CMD_ABORT) + continue; + + i_cmd->status = COMP_CMD_STOP; + + xhci_dbg(xhci, "Turn aborted command %p to no-op\n", + i_cmd->command_trb); + /* get cycle state from the original cmd trb */ + cycle_state = le32_to_cpu( + i_cmd->command_trb->generic.field[3]) & TRB_CYCLE; + /* modify the command trb to no-op command */ + i_cmd->command_trb->generic.field[0] = 0; + i_cmd->command_trb->generic.field[1] = 0; + i_cmd->command_trb->generic.field[2] = 0; + i_cmd->command_trb->generic.field[3] = cpu_to_le32( + TRB_TYPE(TRB_CMD_NOOP) | cycle_state); + + /* + * caller waiting for completion is called when command + * completion event is received for these no-op commands + */ + } + + xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; + + /* ring command ring doorbell to restart the command ring */ + if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) && + !(xhci->xhc_state & XHCI_STATE_DYING)) { + xhci->current_cmd = cur_cmd; + xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT); + xhci_ring_cmd_db(xhci); + } +} + +/* Must be called with xhci->lock held, releases and aquires lock back */ +static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags) { u64 temp_64; int ret; xhci_dbg(xhci, "Abort command ring\n"); + reinit_completion(&xhci->cmd_ring_stop_completion); + temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); - xhci->cmd_ring_state = CMD_RING_STATE_ABORTED; xhci_write_64(xhci, temp_64 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring); @@ -308,15 +369,30 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) udelay(1000); ret = xhci_handshake(&xhci->op_regs->cmd_ring, CMD_RING_RUNNING, 0, 3 * 1000 * 1000); - if (ret == 0) - return 0; - - xhci_err(xhci, "Stopped the command ring failed, " - "maybe the host is dead\n"); - xhci->xhc_state |= XHCI_STATE_DYING; - xhci_quiesce(xhci); - xhci_halt(xhci); - return -ESHUTDOWN; + if (ret < 0) { + xhci_err(xhci, "Stopped the command ring failed, " + "maybe the host is dead\n"); + xhci->xhc_state |= XHCI_STATE_DYING; + xhci_quiesce(xhci); + xhci_halt(xhci); + return -ESHUTDOWN; + } + } + /* + * Writing the CMD_RING_ABORT bit should cause a cmd completion event, + * however on some host hw the CMD_RING_RUNNING bit is correctly cleared + * but the completion event in never sent. Wait 2 secs (arbitrary + * number) to handle those cases after negation of CMD_RING_RUNNING. + */ + spin_unlock_irqrestore(&xhci->lock, flags); + ret = wait_for_completion_timeout(&xhci->cmd_ring_stop_completion, + msecs_to_jiffies(2000)); + spin_lock_irqsave(&xhci->lock, flags); + if (!ret) { + xhci_dbg(xhci, "No stop event for abort, ring start fail?\n"); + xhci_cleanup_command_queue(xhci); + } else { + xhci_handle_stopped_cmd_ring(xhci, xhci_next_queued_cmd(xhci)); } return 0; @@ -837,13 +913,6 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) spin_lock_irqsave(&xhci->lock, flags); ep->stop_cmds_pending--; - if (xhci->xhc_state & XHCI_STATE_DYING) { - xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, - "Stop EP timer ran, but another timer marked " - "xHCI as DYING, exiting."); - spin_unlock_irqrestore(&xhci->lock, flags); - return; - } if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) { xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "Stop EP timer ran, but no command pending, " @@ -890,7 +959,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "Calling usb_hc_died()"); - usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); + usb_hc_died(xhci_to_hcd(xhci)); xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "xHCI host controller is dead."); } @@ -1195,93 +1264,62 @@ void xhci_cleanup_command_queue(struct xhci_hcd *xhci) xhci_complete_del_and_free_cmd(cur_cmd, COMP_CMD_ABORT); } -/* - * Turn all commands on command ring with status set to "aborted" to no-op trbs. - * If there are other commands waiting then restart the ring and kick the timer. - * This must be called with command ring stopped and xhci->lock held. - */ -static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci, - struct xhci_command *cur_cmd) -{ - struct xhci_command *i_cmd, *tmp_cmd; - u32 cycle_state; - - /* Turn all aborted commands in list to no-ops, then restart */ - list_for_each_entry_safe(i_cmd, tmp_cmd, &xhci->cmd_list, - cmd_list) { - - if (i_cmd->status != COMP_CMD_ABORT) - continue; - - i_cmd->status = COMP_CMD_STOP; - - xhci_dbg(xhci, "Turn aborted command %p to no-op\n", - i_cmd->command_trb); - /* get cycle state from the original cmd trb */ - cycle_state = le32_to_cpu( - i_cmd->command_trb->generic.field[3]) & TRB_CYCLE; - /* modify the command trb to no-op command */ - i_cmd->command_trb->generic.field[0] = 0; - i_cmd->command_trb->generic.field[1] = 0; - i_cmd->command_trb->generic.field[2] = 0; - i_cmd->command_trb->generic.field[3] = cpu_to_le32( - TRB_TYPE(TRB_CMD_NOOP) | cycle_state); - - /* - * caller waiting for completion is called when command - * completion event is received for these no-op commands - */ - } - - xhci->cmd_ring_state = CMD_RING_STATE_RUNNING; - - /* ring command ring doorbell to restart the command ring */ - if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) && - !(xhci->xhc_state & XHCI_STATE_DYING)) { - xhci->current_cmd = cur_cmd; - mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT); - xhci_ring_cmd_db(xhci); - } - return; -} - - -void xhci_handle_command_timeout(unsigned long data) +void xhci_handle_command_timeout(struct work_struct *work) { struct xhci_hcd *xhci; int ret; unsigned long flags; u64 hw_ring_state; - struct xhci_command *cur_cmd = NULL; - xhci = (struct xhci_hcd *) data; - /* mark this command to be cancelled */ + xhci = container_of(to_delayed_work(work), struct xhci_hcd, cmd_timer); + spin_lock_irqsave(&xhci->lock, flags); - if (xhci->current_cmd) { - cur_cmd = xhci->current_cmd; - cur_cmd->status = COMP_CMD_ABORT; - } + /* + * If timeout work is pending, or current_cmd is NULL, it means we + * raced with command completion. Command is handled so just return. + */ + if (!xhci->current_cmd || delayed_work_pending(&xhci->cmd_timer)) { + spin_unlock_irqrestore(&xhci->lock, flags); + return; + } + /* mark this command to be cancelled */ + xhci->current_cmd->status = COMP_CMD_ABORT; /* Make sure command ring is running before aborting it */ hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) && (hw_ring_state & CMD_RING_RUNNING)) { - - spin_unlock_irqrestore(&xhci->lock, flags); + /* Prevent new doorbell, and start command abort */ + xhci->cmd_ring_state = CMD_RING_STATE_ABORTED; xhci_dbg(xhci, "Command timeout\n"); - ret = xhci_abort_cmd_ring(xhci); + ret = xhci_abort_cmd_ring(xhci, flags); if (unlikely(ret == -ESHUTDOWN)) { xhci_err(xhci, "Abort command ring failed\n"); xhci_cleanup_command_queue(xhci); + spin_unlock_irqrestore(&xhci->lock, flags); usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); xhci_dbg(xhci, "xHCI host controller is dead.\n"); + + return; } - return; + + goto time_out_completed; } + + /* host removed. Bail out */ + if (xhci->xhc_state & XHCI_STATE_REMOVING) { + xhci_dbg(xhci, "host removed, ring start fail?\n"); + xhci_cleanup_command_queue(xhci); + + goto time_out_completed; + } + /* command timeout on stopped ring, ring can't be aborted */ xhci_dbg(xhci, "Command timeout on stopped ring\n"); xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd); + +time_out_completed: spin_unlock_irqrestore(&xhci->lock, flags); return; } @@ -1314,13 +1352,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, cmd = list_entry(xhci->cmd_list.next, struct xhci_command, cmd_list); - if (cmd->command_trb != xhci->cmd_ring->dequeue) { - xhci_err(xhci, - "Command completion event does not match command\n"); - return; - } - - del_timer(&xhci->cmd_timer); + cancel_delayed_work(&xhci->cmd_timer); trace_xhci_cmd_completion(cmd_trb, (struct xhci_generic_trb *) event); @@ -1328,9 +1360,16 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, /* If CMD ring stopped we own the trbs between enqueue and dequeue */ if (cmd_comp_code == COMP_CMD_STOP) { - xhci_handle_stopped_cmd_ring(xhci, cmd); + complete_all(&xhci->cmd_ring_stop_completion); return; } + + if (cmd->command_trb != xhci->cmd_ring->dequeue) { + xhci_err(xhci, + "Command completion event does not match command\n"); + return; + } + /* * Host aborted the command ring, check if the current command was * supposed to be aborted, otherwise continue normally. @@ -1339,8 +1378,11 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, */ if (cmd_comp_code == COMP_CMD_ABORT) { xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; - if (cmd->status == COMP_CMD_ABORT) + if (cmd->status == COMP_CMD_ABORT) { + if (xhci->current_cmd == cmd) + xhci->current_cmd = NULL; goto event_handled; + } } cmd_type = TRB_FIELD_TO_TYPE(le32_to_cpu(cmd_trb->generic.field[3])); @@ -1401,7 +1443,9 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, if (cmd->cmd_list.next != &xhci->cmd_list) { xhci->current_cmd = list_entry(cmd->cmd_list.next, struct xhci_command, cmd_list); - mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT); + xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT); + } else if (xhci->current_cmd == cmd) { + xhci->current_cmd = NULL; } event_handled: @@ -2727,7 +2771,8 @@ hw_died: writel(irq_pending, &xhci->ir_set->irq_pending); } - if (xhci->xhc_state & XHCI_STATE_DYING) { + if (xhci->xhc_state & XHCI_STATE_DYING || + xhci->xhc_state & XHCI_STATE_HALTED) { xhci_dbg(xhci, "xHCI dying, ignoring interrupt. " "Shouldn't IRQs be disabled?\n"); /* Clear the event handler busy flag (RW1C); @@ -3557,7 +3602,7 @@ static unsigned int xhci_get_burst_count(struct xhci_hcd *xhci, { unsigned int max_burst; - if (xhci->hci_version < 0x100 || udev->speed != USB_SPEED_SUPER) + if (xhci->hci_version < 0x100 || udev->speed < USB_SPEED_SUPER) return 0; max_burst = urb->ep->ss_ep_comp.bMaxBurst; @@ -3583,6 +3628,7 @@ static unsigned int xhci_get_last_burst_packet_count(struct xhci_hcd *xhci, return 0; switch (udev->speed) { + case USB_SPEED_SUPER_PLUS: case USB_SPEED_SUPER: /* bMaxBurst is zero based: 0 means 1 packet per burst */ max_burst = urb->ep->ss_ep_comp.bMaxBurst; @@ -4008,7 +4054,8 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd, int reserved_trbs = xhci->cmd_ring_reserved_trbs; int ret; - if (xhci->xhc_state) { + if ((xhci->xhc_state & XHCI_STATE_DYING) || + (xhci->xhc_state & XHCI_STATE_HALTED)) { xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n"); return -ESHUTDOWN; } @@ -4031,9 +4078,9 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd, /* if there are no other commands queued we start the timeout timer */ if (xhci->cmd_list.next == &cmd->cmd_list && - !timer_pending(&xhci->cmd_timer)) { + !delayed_work_pending(&xhci->cmd_timer)) { xhci->current_cmd = cmd; - mod_timer(&xhci->cmd_timer, jiffies + XHCI_CMD_DEFAULT_TIMEOUT); + xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT); } queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3, diff --git a/kernel/drivers/usb/host/xhci.c b/kernel/drivers/usb/host/xhci.c index 776d59c32..f2e9f59c9 100644 --- a/kernel/drivers/usb/host/xhci.c +++ b/kernel/drivers/usb/host/xhci.c @@ -146,7 +146,8 @@ static int xhci_start(struct xhci_hcd *xhci) "waited %u microseconds.\n", XHCI_MAX_HALT_USEC); if (!ret) - xhci->xhc_state &= ~(XHCI_STATE_HALTED | XHCI_STATE_DYING); + /* clear state flags. Including dying, halted or removing */ + xhci->xhc_state = 0; return ret; } @@ -679,20 +680,23 @@ void xhci_stop(struct usb_hcd *hcd) u32 temp; struct xhci_hcd *xhci = hcd_to_xhci(hcd); - if (xhci->xhc_state & XHCI_STATE_HALTED) - return; - mutex_lock(&xhci->mutex); - spin_lock_irq(&xhci->lock); - xhci->xhc_state |= XHCI_STATE_HALTED; - xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; - /* Make sure the xHC is halted for a USB3 roothub - * (xhci_stop() could be called as part of failed init). - */ - xhci_halt(xhci); - xhci_reset(xhci); - spin_unlock_irq(&xhci->lock); + if (!(xhci->xhc_state & XHCI_STATE_HALTED)) { + spin_lock_irq(&xhci->lock); + + xhci->xhc_state |= XHCI_STATE_HALTED; + xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; + xhci_halt(xhci); + xhci_reset(xhci); + + spin_unlock_irq(&xhci->lock); + } + + if (!usb_hcd_is_primary_hcd(hcd)) { + mutex_unlock(&xhci->mutex); + return; + } xhci_cleanup_msix(xhci); @@ -1103,8 +1107,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* Resume root hubs only when have pending events. */ status = readl(&xhci->op_regs->status); if (status & STS_EINT) { - usb_hcd_resume_root_hub(hcd); usb_hcd_resume_root_hub(xhci->shared_hcd); + usb_hcd_resume_root_hub(hcd); } } @@ -1119,10 +1123,10 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* Re-enable port polling. */ xhci_dbg(xhci, "%s: starting port polling.\n", __func__); - set_bit(HCD_FLAG_POLL_RH, &hcd->flags); - usb_hcd_poll_rh_status(hcd); set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); usb_hcd_poll_rh_status(xhci->shared_hcd); + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + usb_hcd_poll_rh_status(hcd); return retval; } @@ -1565,19 +1569,6 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) xhci_urb_free_priv(urb_priv); return ret; } - if ((xhci->xhc_state & XHCI_STATE_DYING) || - (xhci->xhc_state & XHCI_STATE_HALTED)) { - xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, - "Ep 0x%x: URB %p to be canceled on " - "non-responsive xHCI host.", - urb->ep->desc.bEndpointAddress, urb); - /* Let the stop endpoint command watchdog timer (which set this - * state) finish cleaning up the endpoint TD lists. We must - * have caught it in the middle of dropping a lock and giving - * back an URB. - */ - goto done; - } ep_index = xhci_get_endpoint_index(&urb->ep->desc); ep = &xhci->devs[urb->dev->slot_id]->eps[ep_index]; @@ -2069,6 +2060,7 @@ static unsigned int xhci_get_block_size(struct usb_device *udev) case USB_SPEED_HIGH: return HS_BLOCK; case USB_SPEED_SUPER: + case USB_SPEED_SUPER_PLUS: return SS_BLOCK; case USB_SPEED_UNKNOWN: case USB_SPEED_WIRELESS: @@ -2194,7 +2186,7 @@ static int xhci_check_bw_table(struct xhci_hcd *xhci, unsigned int packets_remaining = 0; unsigned int i; - if (virt_dev->udev->speed == USB_SPEED_SUPER) + if (virt_dev->udev->speed >= USB_SPEED_SUPER) return xhci_check_ss_bw(xhci, virt_dev); if (virt_dev->udev->speed == USB_SPEED_HIGH) { @@ -2395,7 +2387,7 @@ void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci, if (xhci_is_async_ep(ep_bw->type)) return; - if (udev->speed == USB_SPEED_SUPER) { + if (udev->speed >= USB_SPEED_SUPER) { if (xhci_is_sync_in_ep(ep_bw->type)) xhci->devs[udev->slot_id]->bw_table->ss_bw_in -= xhci_get_ss_bw_consumed(ep_bw); @@ -2433,6 +2425,7 @@ void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci, interval_bw->overhead[HS_OVERHEAD_TYPE] -= 1; break; case USB_SPEED_SUPER: + case USB_SPEED_SUPER_PLUS: case USB_SPEED_UNKNOWN: case USB_SPEED_WIRELESS: /* Should never happen because only LS/FS/HS endpoints will get @@ -2492,6 +2485,7 @@ static void xhci_add_ep_to_interval_table(struct xhci_hcd *xhci, interval_bw->overhead[HS_OVERHEAD_TYPE] += 1; break; case USB_SPEED_SUPER: + case USB_SPEED_SUPER_PLUS: case USB_SPEED_UNKNOWN: case USB_SPEED_WIRELESS: /* Should never happen because only LS/FS/HS endpoints will get @@ -2753,7 +2747,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) if (ret <= 0) return ret; xhci = hcd_to_xhci(hcd); - if (xhci->xhc_state & XHCI_STATE_DYING) + if ((xhci->xhc_state & XHCI_STATE_DYING) || + (xhci->xhc_state & XHCI_STATE_REMOVING)) return -ENODEV; xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); @@ -3800,8 +3795,10 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, mutex_lock(&xhci->mutex); - if (xhci->xhc_state) /* dying or halted */ + if (xhci->xhc_state) { /* dying, removing or halted */ + ret = -ESHUTDOWN; goto out; + } if (!udev->slot_id) { xhci_dbg_trace(xhci, trace_xhci_dbg_address, diff --git a/kernel/drivers/usb/host/xhci.h b/kernel/drivers/usb/host/xhci.h index 0b9451250..fc2ee6c27 100644 --- a/kernel/drivers/usb/host/xhci.h +++ b/kernel/drivers/usb/host/xhci.h @@ -312,6 +312,8 @@ struct xhci_op_regs { #define XDEV_U2 (0x2 << 5) #define XDEV_U3 (0x3 << 5) #define XDEV_INACTIVE (0x6 << 5) +#define XDEV_POLLING (0x7 << 5) +#define XDEV_COMP_MODE (0xa << 5) #define XDEV_RESUME (0xf << 5) /* true: port has power (see HCC_PPC) */ #define PORT_POWER (1 << 9) @@ -1550,7 +1552,8 @@ struct xhci_hcd { #define CMD_RING_STATE_STOPPED (1 << 2) struct list_head cmd_list; unsigned int cmd_ring_reserved_trbs; - struct timer_list cmd_timer; + struct delayed_work cmd_timer; + struct completion cmd_ring_stop_completion; struct xhci_command *current_cmd; struct xhci_ring *event_ring; struct xhci_erst erst; @@ -1596,6 +1599,7 @@ struct xhci_hcd { */ #define XHCI_STATE_DYING (1 << 0) #define XHCI_STATE_HALTED (1 << 1) +#define XHCI_STATE_REMOVING (1 << 2) /* Statistics */ int error_bitmask; unsigned int quirks; @@ -1630,6 +1634,7 @@ struct xhci_hcd { /* For controllers with a broken beyond repair streams implementation */ #define XHCI_BROKEN_STREAMS (1 << 19) #define XHCI_PME_STUCK_QUIRK (1 << 20) +#define XHCI_MISSING_CAS (1 << 24) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ @@ -1911,7 +1916,7 @@ void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, struct xhci_dequeue_state *deq_state); void xhci_stop_endpoint_command_watchdog(unsigned long arg); -void xhci_handle_command_timeout(unsigned long data); +void xhci_handle_command_timeout(struct work_struct *work); void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id, unsigned int ep_index, unsigned int stream_id); diff --git a/kernel/drivers/usb/misc/iowarrior.c b/kernel/drivers/usb/misc/iowarrior.c index c6bfd13f6..1950e87b4 100644 --- a/kernel/drivers/usb/misc/iowarrior.c +++ b/kernel/drivers/usb/misc/iowarrior.c @@ -787,6 +787,12 @@ static int iowarrior_probe(struct usb_interface *interface, iface_desc = interface->cur_altsetting; dev->product_id = le16_to_cpu(udev->descriptor.idProduct); + if (iface_desc->desc.bNumEndpoints < 1) { + dev_err(&interface->dev, "Invalid number of endpoints\n"); + retval = -EINVAL; + goto error; + } + /* set up the endpoint information */ for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; diff --git a/kernel/drivers/usb/misc/legousbtower.c b/kernel/drivers/usb/misc/legousbtower.c index 7771be3ac..4dd531ac5 100644 --- a/kernel/drivers/usb/misc/legousbtower.c +++ b/kernel/drivers/usb/misc/legousbtower.c @@ -898,24 +898,6 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device dev->interrupt_in_interval = interrupt_in_interval ? interrupt_in_interval : dev->interrupt_in_endpoint->bInterval; dev->interrupt_out_interval = interrupt_out_interval ? interrupt_out_interval : dev->interrupt_out_endpoint->bInterval; - /* we can register the device now, as it is ready */ - usb_set_intfdata (interface, dev); - - retval = usb_register_dev (interface, &tower_class); - - if (retval) { - /* something prevented us from registering this driver */ - dev_err(idev, "Not able to get a minor for this device.\n"); - usb_set_intfdata (interface, NULL); - goto error; - } - dev->minor = interface->minor; - - /* let the user know what node this device is now attached to */ - dev_info(&interface->dev, "LEGO USB Tower #%d now attached to major " - "%d minor %d\n", (dev->minor - LEGO_USB_TOWER_MINOR_BASE), - USB_MAJOR, dev->minor); - /* get the firmware version and log it */ result = usb_control_msg (udev, usb_rcvctrlpipe(udev, 0), @@ -936,6 +918,23 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device get_version_reply.minor, le16_to_cpu(get_version_reply.build_no)); + /* we can register the device now, as it is ready */ + usb_set_intfdata (interface, dev); + + retval = usb_register_dev (interface, &tower_class); + + if (retval) { + /* something prevented us from registering this driver */ + dev_err(idev, "Not able to get a minor for this device.\n"); + usb_set_intfdata (interface, NULL); + goto error; + } + dev->minor = interface->minor; + + /* let the user know what node this device is now attached to */ + dev_info(&interface->dev, "LEGO USB Tower #%d now attached to major " + "%d minor %d\n", (dev->minor - LEGO_USB_TOWER_MINOR_BASE), + USB_MAJOR, dev->minor); exit: return retval; diff --git a/kernel/drivers/usb/misc/usbtest.c b/kernel/drivers/usb/misc/usbtest.c index 637f3f7cf..1624b09d9 100644 --- a/kernel/drivers/usb/misc/usbtest.c +++ b/kernel/drivers/usb/misc/usbtest.c @@ -505,6 +505,7 @@ static struct scatterlist * alloc_sglist(int nents, int max, int vary, struct usbtest_dev *dev, int pipe) { struct scatterlist *sg; + unsigned int n_size = 0; unsigned i; unsigned size = max; unsigned maxpacket = @@ -537,7 +538,8 @@ alloc_sglist(int nents, int max, int vary, struct usbtest_dev *dev, int pipe) break; case 1: for (j = 0; j < size; j++) - *buf++ = (u8) ((j % maxpacket) % 63); + *buf++ = (u8) (((j + n_size) % maxpacket) % 63); + n_size += size; break; } @@ -556,7 +558,6 @@ static void sg_timeout(unsigned long _req) { struct usb_sg_request *req = (struct usb_sg_request *) _req; - req->status = -ETIMEDOUT; usb_sg_cancel(req); } @@ -587,8 +588,10 @@ static int perform_sglist( mod_timer(&sg_timer, jiffies + msecs_to_jiffies(SIMPLE_IO_TIMEOUT)); usb_sg_wait(req); - del_timer_sync(&sg_timer); - retval = req->status; + if (!del_timer_sync(&sg_timer)) + retval = -ETIMEDOUT; + else + retval = req->status; /* FIXME check resulting data pattern */ diff --git a/kernel/drivers/usb/musb/blackfin.c b/kernel/drivers/usb/musb/blackfin.c index 310238c6b..896798071 100644 --- a/kernel/drivers/usb/musb/blackfin.c +++ b/kernel/drivers/usb/musb/blackfin.c @@ -469,6 +469,7 @@ static const struct musb_platform_ops bfin_ops = { .init = bfin_musb_init, .exit = bfin_musb_exit, + .fifo_offset = bfin_fifo_offset, .readb = bfin_readb, .writeb = bfin_writeb, .readw = bfin_readw, diff --git a/kernel/drivers/usb/musb/musb_core.c b/kernel/drivers/usb/musb/musb_core.c index ee9ff7028..00eed5d66 100644 --- a/kernel/drivers/usb/musb/musb_core.c +++ b/kernel/drivers/usb/musb/musb_core.c @@ -2401,7 +2401,8 @@ static void musb_restore_context(struct musb *musb) musb_writew(musb_base, MUSB_INTRTXE, musb->intrtxe); musb_writew(musb_base, MUSB_INTRRXE, musb->intrrxe); musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe); - musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl); + if (musb->context.devctl & MUSB_DEVCTL_SESSION) + musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl); for (i = 0; i < musb->config->num_eps; ++i) { struct musb_hw_ep *hw_ep; diff --git a/kernel/drivers/usb/musb/musb_core.h b/kernel/drivers/usb/musb/musb_core.h index 2337d7a7d..90de7900e 100644 --- a/kernel/drivers/usb/musb/musb_core.h +++ b/kernel/drivers/usb/musb/musb_core.h @@ -214,6 +214,7 @@ struct musb_platform_ops { dma_addr_t *dma_addr, u32 *len); void (*pre_root_reset_end)(struct musb *musb); void (*post_root_reset_end)(struct musb *musb); + void (*clear_ep_rxintr)(struct musb *musb, int epnum); }; /* @@ -612,4 +613,10 @@ static inline void musb_platform_post_root_reset_end(struct musb *musb) musb->ops->post_root_reset_end(musb); } +static inline void musb_platform_clear_ep_rxintr(struct musb *musb, int epnum) +{ + if (musb->ops->clear_ep_rxintr) + musb->ops->clear_ep_rxintr(musb, epnum); +} + #endif /* __MUSB_CORE_H__ */ diff --git a/kernel/drivers/usb/musb/musb_dsps.c b/kernel/drivers/usb/musb/musb_dsps.c index eeb7d9ecf..5a021b26d 100644 --- a/kernel/drivers/usb/musb/musb_dsps.c +++ b/kernel/drivers/usb/musb/musb_dsps.c @@ -301,6 +301,17 @@ static void otg_timer(unsigned long _musb) spin_unlock_irqrestore(&musb->lock, flags); } +void dsps_musb_clear_ep_rxintr(struct musb *musb, int epnum) +{ + u32 epintr; + struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent); + const struct dsps_musb_wrapper *wrp = glue->wrp; + + /* musb->lock might already been held */ + epintr = (1 << epnum) << wrp->rxep_shift; + musb_writel(musb->ctrl_base, wrp->epintr_status, epintr); +} + static irqreturn_t dsps_interrupt(int irq, void *hci) { struct musb *musb = hci; @@ -647,6 +658,7 @@ static struct musb_platform_ops dsps_ops = { .try_idle = dsps_musb_try_idle, .set_mode = dsps_musb_set_mode, .recover = dsps_musb_recover, + .clear_ep_rxintr = dsps_musb_clear_ep_rxintr, }; static u64 musb_dmamask = DMA_BIT_MASK(32); diff --git a/kernel/drivers/usb/musb/musb_host.c b/kernel/drivers/usb/musb/musb_host.c index 795a45b1b..13d5614f3 100644 --- a/kernel/drivers/usb/musb/musb_host.c +++ b/kernel/drivers/usb/musb/musb_host.c @@ -594,14 +594,13 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, u8 epnum) musb_writew(ep->regs, MUSB_TXCSR, 0); /* scrub all previous state, clearing toggle */ - } else { - csr = musb_readw(ep->regs, MUSB_RXCSR); - if (csr & MUSB_RXCSR_RXPKTRDY) - WARNING("rx%d, packet/%d ready?\n", ep->epnum, - musb_readw(ep->regs, MUSB_RXCOUNT)); - - musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG); } + csr = musb_readw(ep->regs, MUSB_RXCSR); + if (csr & MUSB_RXCSR_RXPKTRDY) + WARNING("rx%d, packet/%d ready?\n", ep->epnum, + musb_readw(ep->regs, MUSB_RXCOUNT)); + + musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG); /* target addr and (for multipoint) hub addr/port */ if (musb->is_multipoint) { @@ -662,7 +661,7 @@ static int musb_tx_dma_set_mode_mentor(struct dma_controller *dma, csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE); csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */ } - channel->desired_mode = mode; + channel->desired_mode = *mode; musb_writew(epio, MUSB_TXCSR, csr); return 0; @@ -995,9 +994,15 @@ static void musb_bulk_nak_timeout(struct musb *musb, struct musb_hw_ep *ep, if (is_in) { dma = is_dma_capable() ? ep->rx_channel : NULL; - /* clear nak timeout bit */ + /* + * Need to stop the transaction by clearing REQPKT first + * then the NAK Timeout bit ref MUSBMHDRC USB 2.0 HIGH-SPEED + * DUAL-ROLE CONTROLLER Programmer's Guide, section 9.2.2 + */ rx_csr = musb_readw(epio, MUSB_RXCSR); rx_csr |= MUSB_RXCSR_H_WZC_BITS; + rx_csr &= ~MUSB_RXCSR_H_REQPKT; + musb_writew(epio, MUSB_RXCSR, rx_csr); rx_csr &= ~MUSB_RXCSR_DATAERROR; musb_writew(epio, MUSB_RXCSR, rx_csr); @@ -1551,7 +1556,7 @@ static int musb_rx_dma_iso_cppi41(struct dma_controller *dma, struct urb *urb, size_t len) { - struct dma_channel *channel = hw_ep->tx_channel; + struct dma_channel *channel = hw_ep->rx_channel; void __iomem *epio = hw_ep->regs; dma_addr_t *buf; u32 length, res; @@ -2003,10 +2008,8 @@ void musb_host_rx(struct musb *musb, u8 epnum) qh->offset, urb->transfer_buffer_length); - done = musb_rx_dma_in_inventra_cppi41(c, hw_ep, qh, - urb, xfer_len, - iso_err); - if (done) + if (musb_rx_dma_in_inventra_cppi41(c, hw_ep, qh, urb, + xfer_len, iso_err)) goto finish; else dev_err(musb->controller, "error: rx_dma failed\n"); @@ -2387,12 +2390,11 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh) int is_in = usb_pipein(urb->pipe); int status = 0; u16 csr; + struct dma_channel *dma = NULL; musb_ep_select(regs, hw_end); if (is_dma_capable()) { - struct dma_channel *dma; - dma = is_in ? ep->rx_channel : ep->tx_channel; if (dma) { status = ep->musb->dma_controller->channel_abort(dma); @@ -2409,10 +2411,9 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh) /* giveback saves bulk toggle */ csr = musb_h_flush_rxfifo(ep, 0); - /* REVISIT we still get an irq; should likely clear the - * endpoint's irq status here to avoid bogus irqs. - * clearing that status is platform-specific... - */ + /* clear the endpoint's irq status here to avoid bogus irqs */ + if (is_dma_capable() && dma) + musb_platform_clear_ep_rxintr(musb, ep->epnum); } else if (ep->epnum) { musb_h_tx_flush_fifo(ep); csr = musb_readw(epio, MUSB_TXCSR); diff --git a/kernel/drivers/usb/musb/musbhsdma.h b/kernel/drivers/usb/musb/musbhsdma.h index f7b13fd25..a3dcbd55e 100644 --- a/kernel/drivers/usb/musb/musbhsdma.h +++ b/kernel/drivers/usb/musb/musbhsdma.h @@ -157,5 +157,5 @@ struct musb_dma_controller { void __iomem *base; u8 channel_count; u8 used_channels; - u8 irq; + int irq; }; diff --git a/kernel/drivers/usb/phy/phy-am335x-control.c b/kernel/drivers/usb/phy/phy-am335x-control.c index 7b3035ff9..1b4d742a2 100644 --- a/kernel/drivers/usb/phy/phy-am335x-control.c +++ b/kernel/drivers/usb/phy/phy-am335x-control.c @@ -126,10 +126,12 @@ struct phy_control *am335x_get_phy_control(struct device *dev) return NULL; dev = bus_find_device(&platform_bus_type, NULL, node, match); + of_node_put(node); if (!dev) return NULL; ctrl_usb = dev_get_drvdata(dev); + put_device(dev); if (!ctrl_usb) return NULL; return &ctrl_usb->phy_ctrl; diff --git a/kernel/drivers/usb/renesas_usbhs/fifo.c b/kernel/drivers/usb/renesas_usbhs/fifo.c index c0f5c652d..36e5b5c53 100644 --- a/kernel/drivers/usb/renesas_usbhs/fifo.c +++ b/kernel/drivers/usb/renesas_usbhs/fifo.c @@ -190,7 +190,8 @@ static int usbhsf_pkt_handler(struct usbhs_pipe *pipe, int type) goto __usbhs_pkt_handler_end; } - ret = func(pkt, &is_done); + if (likely(func)) + ret = func(pkt, &is_done); if (is_done) __usbhsf_pkt_del(pkt); @@ -807,20 +808,27 @@ static void xfer_work(struct work_struct *work) { struct usbhs_pkt *pkt = container_of(work, struct usbhs_pkt, work); struct usbhs_pipe *pipe = pkt->pipe; - struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe); + struct usbhs_fifo *fifo; struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); struct dma_async_tx_descriptor *desc; - struct dma_chan *chan = usbhsf_dma_chan_get(fifo, pkt); + struct dma_chan *chan; struct device *dev = usbhs_priv_to_dev(priv); enum dma_transfer_direction dir; + unsigned long flags; + usbhs_lock(priv, flags); + fifo = usbhs_pipe_to_fifo(pipe); + if (!fifo) + goto xfer_work_end; + + chan = usbhsf_dma_chan_get(fifo, pkt); dir = usbhs_pipe_is_dir_in(pipe) ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV; desc = dmaengine_prep_slave_single(chan, pkt->dma + pkt->actual, pkt->trans, dir, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) - return; + goto xfer_work_end; desc->callback = usbhsf_dma_complete; desc->callback_param = pipe; @@ -828,7 +836,7 @@ static void xfer_work(struct work_struct *work) pkt->cookie = dmaengine_submit(desc); if (pkt->cookie < 0) { dev_err(dev, "Failed to submit dma descriptor\n"); - return; + goto xfer_work_end; } dev_dbg(dev, " %s %d (%d/ %d)\n", @@ -839,6 +847,9 @@ static void xfer_work(struct work_struct *work) usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->trans); dma_async_issue_pending(chan); usbhs_pipe_enable(pipe); + +xfer_work_end: + usbhs_unlock(priv, flags); } /* @@ -858,7 +869,7 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) /* use PIO if packet is less than pio_dma_border or pipe is DCP */ if ((len < usbhs_get_dparam(priv, pio_dma_border)) || - usbhs_pipe_is_dcp(pipe)) + usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC)) goto usbhsf_pio_prepare_push; /* check data length if this driver don't use USB-DMAC */ @@ -889,6 +900,7 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) pkt->trans = len; + usbhsf_tx_irq_ctrl(pipe, 0); INIT_WORK(&pkt->work, xfer_work); schedule_work(&pkt->work); @@ -962,7 +974,7 @@ static int usbhsf_dma_prepare_pop_with_usb_dmac(struct usbhs_pkt *pkt, /* use PIO if packet is less than pio_dma_border or pipe is DCP */ if ((pkt->length < usbhs_get_dparam(priv, pio_dma_border)) || - usbhs_pipe_is_dcp(pipe)) + usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC)) goto usbhsf_pio_prepare_pop; fifo = usbhsf_get_dma_fifo(priv, pkt); diff --git a/kernel/drivers/usb/renesas_usbhs/mod.c b/kernel/drivers/usb/renesas_usbhs/mod.c index d4be5d594..28965ef4f 100644 --- a/kernel/drivers/usb/renesas_usbhs/mod.c +++ b/kernel/drivers/usb/renesas_usbhs/mod.c @@ -282,9 +282,16 @@ static irqreturn_t usbhs_interrupt(int irq, void *data) if (usbhs_mod_is_host(priv)) usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC); - usbhs_write(priv, BRDYSTS, ~irq_state.brdysts); + /* + * The driver should not clear the xxxSTS after the line of + * "call irq callback functions" because each "if" statement is + * possible to call the callback function for avoiding any side effects. + */ + if (irq_state.intsts0 & BRDY) + usbhs_write(priv, BRDYSTS, ~irq_state.brdysts); usbhs_write(priv, NRDYSTS, ~irq_state.nrdysts); - usbhs_write(priv, BEMPSTS, ~irq_state.bempsts); + if (irq_state.intsts0 & BEMP) + usbhs_write(priv, BEMPSTS, ~irq_state.bempsts); /* * call irq callback functions diff --git a/kernel/drivers/usb/renesas_usbhs/mod_gadget.c b/kernel/drivers/usb/renesas_usbhs/mod_gadget.c index 8f7a78e70..efc4fae12 100644 --- a/kernel/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/kernel/drivers/usb/renesas_usbhs/mod_gadget.c @@ -158,10 +158,14 @@ static void usbhsg_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt) struct usbhs_pipe *pipe = pkt->pipe; struct usbhsg_uep *uep = usbhsg_pipe_to_uep(pipe); struct usbhsg_request *ureq = usbhsg_pkt_to_ureq(pkt); + unsigned long flags; ureq->req.actual = pkt->actual; - usbhsg_queue_pop(uep, ureq, 0); + usbhs_lock(priv, flags); + if (uep) + __usbhsg_queue_pop(uep, ureq, 0); + usbhs_unlock(priv, flags); } static void usbhsg_queue_push(struct usbhsg_uep *uep, @@ -582,6 +586,9 @@ static int usbhsg_ep_enable(struct usb_ep *ep, struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv); struct usbhs_pipe *pipe; int ret = -EIO; + unsigned long flags; + + usbhs_lock(priv, flags); /* * if it already have pipe, @@ -590,7 +597,8 @@ static int usbhsg_ep_enable(struct usb_ep *ep, if (uep->pipe) { usbhs_pipe_clear(uep->pipe); usbhs_pipe_sequence_data0(uep->pipe); - return 0; + ret = 0; + goto usbhsg_ep_enable_end; } pipe = usbhs_pipe_malloc(priv, @@ -610,14 +618,20 @@ static int usbhsg_ep_enable(struct usb_ep *ep, * use dmaengine if possible. * It will use pio handler if impossible. */ - if (usb_endpoint_dir_in(desc)) + if (usb_endpoint_dir_in(desc)) { pipe->handler = &usbhs_fifo_dma_push_handler; - else + } else { pipe->handler = &usbhs_fifo_dma_pop_handler; + usbhs_xxxsts_clear(priv, BRDYSTS, + usbhs_pipe_number(pipe)); + } ret = 0; } +usbhsg_ep_enable_end: + usbhs_unlock(priv, flags); + return ret; } @@ -1061,7 +1075,7 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv) gpriv->transceiver = usb_get_phy(USB_PHY_TYPE_UNDEFINED); dev_info(dev, "%stransceiver found\n", - gpriv->transceiver ? "" : "no "); + !IS_ERR(gpriv->transceiver) ? "" : "no "); /* * CAUTION diff --git a/kernel/drivers/usb/serial/ch341.c b/kernel/drivers/usb/serial/ch341.c index c73808f09..71133d96f 100644 --- a/kernel/drivers/usb/serial/ch341.c +++ b/kernel/drivers/usb/serial/ch341.c @@ -99,6 +99,8 @@ static int ch341_control_out(struct usb_device *dev, u8 request, r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, value, index, NULL, 0, DEFAULT_TIMEOUT); + if (r < 0) + dev_err(&dev->dev, "failed to send control message: %d\n", r); return r; } @@ -116,7 +118,20 @@ static int ch341_control_in(struct usb_device *dev, r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, value, index, buf, bufsize, DEFAULT_TIMEOUT); - return r; + if (r < bufsize) { + if (r >= 0) { + dev_err(&dev->dev, + "short control message received (%d < %u)\n", + r, bufsize); + r = -EIO; + } + + dev_err(&dev->dev, "failed to receive control message: %d\n", + r); + return r; + } + + return 0; } static int ch341_set_baudrate(struct usb_device *dev, @@ -158,9 +173,9 @@ static int ch341_set_handshake(struct usb_device *dev, u8 control) static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv) { + const unsigned int size = 2; char *buffer; int r; - const unsigned size = 8; unsigned long flags; buffer = kmalloc(size, GFP_KERNEL); @@ -171,14 +186,9 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv) if (r < 0) goto out; - /* setup the private status if available */ - if (r == 2) { - r = 0; - spin_lock_irqsave(&priv->lock, flags); - priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT; - spin_unlock_irqrestore(&priv->lock, flags); - } else - r = -EPROTO; + spin_lock_irqsave(&priv->lock, flags); + priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT; + spin_unlock_irqrestore(&priv->lock, flags); out: kfree(buffer); return r; @@ -188,9 +198,9 @@ out: kfree(buffer); static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) { + const unsigned int size = 2; char *buffer; int r; - const unsigned size = 8; buffer = kmalloc(size, GFP_KERNEL); if (!buffer) @@ -253,7 +263,6 @@ static int ch341_port_probe(struct usb_serial_port *port) spin_lock_init(&priv->lock); priv->baud_rate = DEFAULT_BAUD_RATE; - priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; r = ch341_configure(port->serial->dev, priv); if (r < 0) @@ -315,7 +324,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) r = ch341_configure(serial->dev, priv); if (r) - goto out; + return r; if (tty) ch341_set_termios(tty, port, NULL); @@ -325,12 +334,19 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) if (r) { dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n", __func__, r); - goto out; + return r; } r = usb_serial_generic_open(tty, port); + if (r) + goto err_kill_interrupt_urb; -out: return r; + return 0; + +err_kill_interrupt_urb: + usb_kill_urb(port->interrupt_in_urb); + + return r; } /* Old_termios contains the original termios settings and @@ -345,26 +361,25 @@ static void ch341_set_termios(struct tty_struct *tty, baud_rate = tty_get_baud_rate(tty); - priv->baud_rate = baud_rate; - if (baud_rate) { - spin_lock_irqsave(&priv->lock, flags); - priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS); - spin_unlock_irqrestore(&priv->lock, flags); + priv->baud_rate = baud_rate; ch341_set_baudrate(port->serial->dev, priv); - } else { - spin_lock_irqsave(&priv->lock, flags); - priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS); - spin_unlock_irqrestore(&priv->lock, flags); } - ch341_set_handshake(port->serial->dev, priv->line_control); - /* Unimplemented: * (cflag & CSIZE) : data bits [5, 8] * (cflag & PARENB) : parity {NONE, EVEN, ODD} * (cflag & CSTOPB) : stop bits [1, 2] */ + + spin_lock_irqsave(&priv->lock, flags); + if (C_BAUD(tty) == B0) + priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS); + else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) + priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS); + spin_unlock_irqrestore(&priv->lock, flags); + + ch341_set_handshake(port->serial->dev, priv->line_control); } static void ch341_break_ctl(struct tty_struct *tty, int break_state) @@ -539,14 +554,23 @@ static int ch341_tiocmget(struct tty_struct *tty) static int ch341_reset_resume(struct usb_serial *serial) { - struct ch341_private *priv; - - priv = usb_get_serial_port_data(serial->port[0]); + struct usb_serial_port *port = serial->port[0]; + struct ch341_private *priv = usb_get_serial_port_data(port); + int ret; /* reconfigure ch341 serial port after bus-reset */ ch341_configure(serial->dev, priv); - return 0; + if (test_bit(ASYNCB_INITIALIZED, &port->port.flags)) { + ret = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); + if (ret) { + dev_err(&port->dev, "failed to submit interrupt urb: %d\n", + ret); + return ret; + } + } + + return usb_serial_generic_resume(serial); } static struct usb_serial_driver ch341_device = { diff --git a/kernel/drivers/usb/serial/cp210x.c b/kernel/drivers/usb/serial/cp210x.c index 7a76fe4c2..fe7452f0f 100644 --- a/kernel/drivers/usb/serial/cp210x.c +++ b/kernel/drivers/usb/serial/cp210x.c @@ -108,6 +108,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */ { USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */ { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */ + { USB_DEVICE(0x10C4, 0x82F4) }, /* Starizona MicroTouch */ { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */ @@ -116,7 +117,9 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */ { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */ { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */ + { USB_DEVICE(0x10C4, 0x8470) }, /* Juniper Networks BX Series System Console */ { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */ + { USB_DEVICE(0x10C4, 0x84B6) }, /* Starizona Hyperion */ { USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */ { USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */ { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */ @@ -127,6 +130,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */ { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */ + { USB_DEVICE(0x10C4, 0x8962) }, /* Brim Brothers charging dock */ { USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */ { USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */ { USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */ @@ -140,6 +144,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */ { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */ { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */ + { USB_DEVICE(0x12B8, 0xEC60) }, /* Link G4 ECU */ + { USB_DEVICE(0x12B8, 0xEC62) }, /* Link G4+ ECU */ { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */ { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */ { USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */ @@ -164,6 +170,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */ { USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */ { USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */ + { USB_DEVICE(0x1901, 0x0194) }, /* GE Healthcare Remote Alarm Box */ { USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */ { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */ { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */ @@ -779,7 +786,7 @@ static void cp210x_set_termios(struct tty_struct *tty, } else { modem_ctl[0] &= ~0x7B; modem_ctl[0] |= 0x01; - modem_ctl[1] |= 0x40; + modem_ctl[1] = 0x40; dev_dbg(dev, "%s - flow control = NONE\n", __func__); } @@ -839,7 +846,9 @@ static int cp210x_tiocmget(struct tty_struct *tty) unsigned int control; int result; - cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1); + result = cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1); + if (result) + return result; result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) |((control & CONTROL_RTS) ? TIOCM_RTS : 0) diff --git a/kernel/drivers/usb/serial/cyberjack.c b/kernel/drivers/usb/serial/cyberjack.c index 2916dea3e..8948f375e 100644 --- a/kernel/drivers/usb/serial/cyberjack.c +++ b/kernel/drivers/usb/serial/cyberjack.c @@ -50,6 +50,7 @@ #define CYBERJACK_PRODUCT_ID 0x0100 /* Function prototypes */ +static int cyberjack_attach(struct usb_serial *serial); static int cyberjack_port_probe(struct usb_serial_port *port); static int cyberjack_port_remove(struct usb_serial_port *port); static int cyberjack_open(struct tty_struct *tty, @@ -77,6 +78,7 @@ static struct usb_serial_driver cyberjack_device = { .description = "Reiner SCT Cyberjack USB card reader", .id_table = id_table, .num_ports = 1, + .attach = cyberjack_attach, .port_probe = cyberjack_port_probe, .port_remove = cyberjack_port_remove, .open = cyberjack_open, @@ -100,6 +102,14 @@ struct cyberjack_private { short wrsent; /* Data already sent */ }; +static int cyberjack_attach(struct usb_serial *serial) +{ + if (serial->num_bulk_out < serial->num_ports) + return -ENODEV; + + return 0; +} + static int cyberjack_port_probe(struct usb_serial_port *port) { struct cyberjack_private *priv; diff --git a/kernel/drivers/usb/serial/cypress_m8.c b/kernel/drivers/usb/serial/cypress_m8.c index 01bf53392..244acb129 100644 --- a/kernel/drivers/usb/serial/cypress_m8.c +++ b/kernel/drivers/usb/serial/cypress_m8.c @@ -447,6 +447,11 @@ static int cypress_generic_port_probe(struct usb_serial_port *port) struct usb_serial *serial = port->serial; struct cypress_private *priv; + if (!port->interrupt_out_urb || !port->interrupt_in_urb) { + dev_err(&port->dev, "required endpoint is missing\n"); + return -ENODEV; + } + priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL); if (!priv) return -ENOMEM; @@ -606,12 +611,6 @@ static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port) cypress_set_termios(tty, port, &priv->tmp_termios); /* setup the port and start reading from the device */ - if (!port->interrupt_in_urb) { - dev_err(&port->dev, "%s - interrupt_in_urb is empty!\n", - __func__); - return -1; - } - usb_fill_int_urb(port->interrupt_in_urb, serial->dev, usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress), port->interrupt_in_urb->transfer_buffer, diff --git a/kernel/drivers/usb/serial/digi_acceleport.c b/kernel/drivers/usb/serial/digi_acceleport.c index 12b0e6747..3df7b7ec1 100644 --- a/kernel/drivers/usb/serial/digi_acceleport.c +++ b/kernel/drivers/usb/serial/digi_acceleport.c @@ -1251,8 +1251,27 @@ static int digi_port_init(struct usb_serial_port *port, unsigned port_num) static int digi_startup(struct usb_serial *serial) { + struct device *dev = &serial->interface->dev; struct digi_serial *serial_priv; int ret; + int i; + + /* check whether the device has the expected number of endpoints */ + if (serial->num_port_pointers < serial->type->num_ports + 1) { + dev_err(dev, "OOB endpoints missing\n"); + return -ENODEV; + } + + for (i = 0; i < serial->type->num_ports + 1 ; i++) { + if (!serial->port[i]->read_urb) { + dev_err(dev, "bulk-in endpoint missing\n"); + return -ENODEV; + } + if (!serial->port[i]->write_urb) { + dev_err(dev, "bulk-out endpoint missing\n"); + return -ENODEV; + } + } serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL); if (!serial_priv) diff --git a/kernel/drivers/usb/serial/ftdi_sio.c b/kernel/drivers/usb/serial/ftdi_sio.c index 8c660ae40..d3d6ec455 100644 --- a/kernel/drivers/usb/serial/ftdi_sio.c +++ b/kernel/drivers/usb/serial/ftdi_sio.c @@ -648,6 +648,8 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PALMSENS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_IVIUM_XSTAT_PID) }, { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) }, { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) }, { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) }, @@ -984,7 +986,8 @@ static const struct usb_device_id id_table_combined[] = { /* ekey Devices */ { USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) }, /* Infineon Devices */ - { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_TC1798_PID, 1) }, + { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_TC2X7_PID, 1) }, /* GE Healthcare devices */ { USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) }, /* Active Research (Actisense) devices */ @@ -1004,6 +1007,13 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) }, { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) }, { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) }, + /* ICP DAS I-756xU devices */ + { USB_DEVICE(ICPDAS_VID, ICPDAS_I7560U_PID) }, + { USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) }, + { USB_DEVICE(ICPDAS_VID, ICPDAS_I7563U_PID) }, + { USB_DEVICE(WICED_VID, WICED_USB20706V2_PID) }, + { USB_DEVICE(TI_VID, TI_CC3200_LAUNCHPAD_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { } /* Terminating entry */ }; diff --git a/kernel/drivers/usb/serial/ftdi_sio_ids.h b/kernel/drivers/usb/serial/ftdi_sio_ids.h index a84df2513..48ee04c94 100644 --- a/kernel/drivers/usb/serial/ftdi_sio_ids.h +++ b/kernel/drivers/usb/serial/ftdi_sio_ids.h @@ -406,6 +406,12 @@ #define FTDI_4N_GALAXY_DE_3_PID 0xF3C2 /* + * Ivium Technologies product IDs + */ +#define FTDI_PALMSENS_PID 0xf440 +#define FTDI_IVIUM_XSTAT_PID 0xf441 + +/* * Linx Technologies product ids */ #define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ @@ -590,6 +596,12 @@ #define STK541_PID 0x2109 /* Zigbee Controller */ /* + * Texas Instruments + */ +#define TI_VID 0x0451 +#define TI_CC3200_LAUNCHPAD_PID 0xC32A /* SimpleLink Wi-Fi CC3200 LaunchPad */ + +/* * Blackfin gnICE JTAG * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice */ @@ -620,8 +632,9 @@ /* * Infineon Technologies */ -#define INFINEON_VID 0x058b -#define INFINEON_TRIBOARD_PID 0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */ +#define INFINEON_VID 0x058b +#define INFINEON_TRIBOARD_TC1798_PID 0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */ +#define INFINEON_TRIBOARD_TC2X7_PID 0x0043 /* DAS JTAG TriBoard TC2X7 V1.0 */ /* * Acton Research Corp. @@ -673,6 +686,12 @@ #define INTREPID_NEOVI_PID 0x0701 /* + * WICED USB UART + */ +#define WICED_VID 0x0A5C +#define WICED_USB20706V2_PID 0x6422 + +/* * Definitions for ID TECH (www.idt-net.com) devices */ #define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ @@ -872,6 +891,14 @@ #define NOVITUS_BONO_E_PID 0x6010 /* + * ICPDAS I-756*U devices + */ +#define ICPDAS_VID 0x1b5c +#define ICPDAS_I7560U_PID 0x0103 +#define ICPDAS_I7561U_PID 0x0104 +#define ICPDAS_I7563U_PID 0x0105 + +/* * RT Systems programming cables for various ham radios */ #define RTSYSTEMS_VID 0x2100 /* Vendor ID */ diff --git a/kernel/drivers/usb/serial/garmin_gps.c b/kernel/drivers/usb/serial/garmin_gps.c index db591d19d..37d0e8cc7 100644 --- a/kernel/drivers/usb/serial/garmin_gps.c +++ b/kernel/drivers/usb/serial/garmin_gps.c @@ -1044,6 +1044,7 @@ static int garmin_write_bulk(struct usb_serial_port *port, "%s - usb_submit_urb(write bulk) failed with status = %d\n", __func__, status); count = status; + kfree(buffer); } /* we are done with this urb, so let the host driver diff --git a/kernel/drivers/usb/serial/io_edgeport.c b/kernel/drivers/usb/serial/io_edgeport.c index c0866971d..b63a6c389 100644 --- a/kernel/drivers/usb/serial/io_edgeport.c +++ b/kernel/drivers/usb/serial/io_edgeport.c @@ -2761,6 +2761,11 @@ static int edge_startup(struct usb_serial *serial) EDGE_COMPATIBILITY_MASK1, EDGE_COMPATIBILITY_MASK2 }; + if (serial->num_bulk_in < 1 || serial->num_interrupt_in < 1) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + dev = serial->dev; /* create our private serial structure */ @@ -2856,14 +2861,16 @@ static int edge_startup(struct usb_serial *serial) /* not set up yet, so do it now */ edge_serial->interrupt_read_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!edge_serial->interrupt_read_urb) - return -ENOMEM; + if (!edge_serial->interrupt_read_urb) { + response = -ENOMEM; + break; + } edge_serial->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL); if (!edge_serial->interrupt_in_buffer) { - usb_free_urb(edge_serial->interrupt_read_urb); - return -ENOMEM; + response = -ENOMEM; + break; } edge_serial->interrupt_in_endpoint = endpoint->bEndpointAddress; @@ -2891,14 +2898,16 @@ static int edge_startup(struct usb_serial *serial) /* not set up yet, so do it now */ edge_serial->read_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!edge_serial->read_urb) - return -ENOMEM; + if (!edge_serial->read_urb) { + response = -ENOMEM; + break; + } edge_serial->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); if (!edge_serial->bulk_in_buffer) { - usb_free_urb(edge_serial->read_urb); - return -ENOMEM; + response = -ENOMEM; + break; } edge_serial->bulk_in_endpoint = endpoint->bEndpointAddress; @@ -2924,9 +2933,22 @@ static int edge_startup(struct usb_serial *serial) } } - if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) { - dev_err(ddev, "Error - the proper endpoints were not found!\n"); - return -ENODEV; + if (response || !interrupt_in_found || !bulk_in_found || + !bulk_out_found) { + if (!response) { + dev_err(ddev, "expected endpoints not found\n"); + response = -ENODEV; + } + + usb_free_urb(edge_serial->interrupt_read_urb); + kfree(edge_serial->interrupt_in_buffer); + + usb_free_urb(edge_serial->read_urb); + kfree(edge_serial->bulk_in_buffer); + + kfree(edge_serial); + + return response; } /* start interrupt read for this edgeport this interrupt will @@ -2949,16 +2971,9 @@ static void edge_disconnect(struct usb_serial *serial) { struct edgeport_serial *edge_serial = usb_get_serial_data(serial); - /* stop reads and writes on all ports */ - /* free up our endpoint stuff */ if (edge_serial->is_epic) { usb_kill_urb(edge_serial->interrupt_read_urb); - usb_free_urb(edge_serial->interrupt_read_urb); - kfree(edge_serial->interrupt_in_buffer); - usb_kill_urb(edge_serial->read_urb); - usb_free_urb(edge_serial->read_urb); - kfree(edge_serial->bulk_in_buffer); } } @@ -2971,6 +2986,16 @@ static void edge_release(struct usb_serial *serial) { struct edgeport_serial *edge_serial = usb_get_serial_data(serial); + if (edge_serial->is_epic) { + usb_kill_urb(edge_serial->interrupt_read_urb); + usb_free_urb(edge_serial->interrupt_read_urb); + kfree(edge_serial->interrupt_in_buffer); + + usb_kill_urb(edge_serial->read_urb); + usb_free_urb(edge_serial->read_urb); + kfree(edge_serial->bulk_in_buffer); + } + kfree(edge_serial); } diff --git a/kernel/drivers/usb/serial/io_ti.c b/kernel/drivers/usb/serial/io_ti.c index fce82fd79..c02808a30 100644 --- a/kernel/drivers/usb/serial/io_ti.c +++ b/kernel/drivers/usb/serial/io_ti.c @@ -1499,8 +1499,7 @@ static int do_boot_mode(struct edgeport_serial *serial, dev_dbg(dev, "%s - Download successful -- Device rebooting...\n", __func__); - /* return an error on purpose */ - return -ENODEV; + return 1; } stayinbootmode: @@ -1508,7 +1507,7 @@ stayinbootmode: dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__); serial->product_info.TiMode = TI_MODE_BOOT; - return 0; + return 1; } static int ti_do_config(struct edgeport_port *port, int feature, int on) @@ -2549,6 +2548,13 @@ static int edge_startup(struct usb_serial *serial) int status; u16 product_id; + /* Make sure we have the required endpoints when in download mode. */ + if (serial->interface->cur_altsetting->desc.bNumEndpoints > 1) { + if (serial->num_bulk_in < serial->num_ports || + serial->num_bulk_out < serial->num_ports) + return -ENODEV; + } + /* create our private serial structure */ edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL); if (!edge_serial) @@ -2556,14 +2562,18 @@ static int edge_startup(struct usb_serial *serial) mutex_init(&edge_serial->es_lock); edge_serial->serial = serial; + INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work); usb_set_serial_data(serial, edge_serial); status = download_fw(edge_serial); - if (status) { + if (status < 0) { kfree(edge_serial); return status; } + if (status > 0) + return 1; /* bind but do not register any ports */ + product_id = le16_to_cpu( edge_serial->serial->dev->descriptor.idProduct); @@ -2575,7 +2585,6 @@ static int edge_startup(struct usb_serial *serial) } } - INIT_DELAYED_WORK(&edge_serial->heartbeat_work, edge_heartbeat_work); edge_heartbeat_schedule(edge_serial); return 0; @@ -2583,6 +2592,9 @@ static int edge_startup(struct usb_serial *serial) static void edge_disconnect(struct usb_serial *serial) { + struct edgeport_serial *edge_serial = usb_get_serial_data(serial); + + cancel_delayed_work_sync(&edge_serial->heartbeat_work); } static void edge_release(struct usb_serial *serial) diff --git a/kernel/drivers/usb/serial/iuu_phoenix.c b/kernel/drivers/usb/serial/iuu_phoenix.c index 5ad4a0fb4..7ed7d33d6 100644 --- a/kernel/drivers/usb/serial/iuu_phoenix.c +++ b/kernel/drivers/usb/serial/iuu_phoenix.c @@ -68,6 +68,16 @@ struct iuu_private { u32 clk; }; +static int iuu_attach(struct usb_serial *serial) +{ + unsigned char num_ports = serial->num_ports; + + if (serial->num_bulk_in < num_ports || serial->num_bulk_out < num_ports) + return -ENODEV; + + return 0; +} + static int iuu_port_probe(struct usb_serial_port *port) { struct iuu_private *priv; @@ -1196,6 +1206,7 @@ static struct usb_serial_driver iuu_device = { .tiocmset = iuu_tiocmset, .set_termios = iuu_set_termios, .init_termios = iuu_init_termios, + .attach = iuu_attach, .port_probe = iuu_port_probe, .port_remove = iuu_port_remove, }; diff --git a/kernel/drivers/usb/serial/keyspan.c b/kernel/drivers/usb/serial/keyspan.c index e07b15ed5..7faa901ee 100644 --- a/kernel/drivers/usb/serial/keyspan.c +++ b/kernel/drivers/usb/serial/keyspan.c @@ -2376,6 +2376,10 @@ static void keyspan_release(struct usb_serial *serial) s_priv = usb_get_serial_data(serial); + /* Make sure to unlink the URBs submitted in attach. */ + usb_kill_urb(s_priv->instat_urb); + usb_kill_urb(s_priv->indat_urb); + usb_free_urb(s_priv->instat_urb); usb_free_urb(s_priv->indat_urb); usb_free_urb(s_priv->glocont_urb); diff --git a/kernel/drivers/usb/serial/keyspan_pda.c b/kernel/drivers/usb/serial/keyspan_pda.c index 4f7e072e4..930be98d5 100644 --- a/kernel/drivers/usb/serial/keyspan_pda.c +++ b/kernel/drivers/usb/serial/keyspan_pda.c @@ -699,6 +699,19 @@ MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw"); MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw"); #endif +static int keyspan_pda_attach(struct usb_serial *serial) +{ + unsigned char num_ports = serial->num_ports; + + if (serial->num_bulk_out < num_ports || + serial->num_interrupt_in < num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int keyspan_pda_port_probe(struct usb_serial_port *port) { @@ -776,6 +789,7 @@ static struct usb_serial_driver keyspan_pda_device = { .break_ctl = keyspan_pda_break_ctl, .tiocmget = keyspan_pda_tiocmget, .tiocmset = keyspan_pda_tiocmset, + .attach = keyspan_pda_attach, .port_probe = keyspan_pda_port_probe, .port_remove = keyspan_pda_port_remove, }; diff --git a/kernel/drivers/usb/serial/kl5kusb105.c b/kernel/drivers/usb/serial/kl5kusb105.c index e020ad28a..83c823d32 100644 --- a/kernel/drivers/usb/serial/kl5kusb105.c +++ b/kernel/drivers/usb/serial/kl5kusb105.c @@ -192,10 +192,11 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, status_buf, KLSI_STATUSBUF_LEN, 10000 ); - if (rc < 0) - dev_err(&port->dev, "Reading line status failed (error = %d)\n", - rc); - else { + if (rc != KLSI_STATUSBUF_LEN) { + dev_err(&port->dev, "reading line status failed: %d\n", rc); + if (rc >= 0) + rc = -EIO; + } else { status = get_unaligned_le16(status_buf); dev_info(&port->serial->dev->dev, "read status %x %x\n", @@ -296,7 +297,7 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) rc = usb_serial_generic_open(tty, port); if (rc) { retval = rc; - goto exit; + goto err_free_cfg; } rc = usb_control_msg(port->serial->dev, @@ -311,21 +312,38 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) if (rc < 0) { dev_err(&port->dev, "Enabling read failed (error = %d)\n", rc); retval = rc; + goto err_generic_close; } else dev_dbg(&port->dev, "%s - enabled reading\n", __func__); rc = klsi_105_get_line_state(port, &line_state); - if (rc >= 0) { - spin_lock_irqsave(&priv->lock, flags); - priv->line_state = line_state; - spin_unlock_irqrestore(&priv->lock, flags); - dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state); - retval = 0; - } else + if (rc < 0) { retval = rc; + goto err_disable_read; + } + + spin_lock_irqsave(&priv->lock, flags); + priv->line_state = line_state; + spin_unlock_irqrestore(&priv->lock, flags); + dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, + line_state); + + return 0; -exit: +err_disable_read: + usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + KL5KUSB105A_SIO_CONFIGURE, + USB_TYPE_VENDOR | USB_DIR_OUT, + KL5KUSB105A_SIO_CONFIGURE_READ_OFF, + 0, /* index */ + NULL, 0, + KLSI_TIMEOUT); +err_generic_close: + usb_serial_generic_close(port); +err_free_cfg: kfree(cfg); + return retval; } diff --git a/kernel/drivers/usb/serial/kobil_sct.c b/kernel/drivers/usb/serial/kobil_sct.c index 2363654ca..813035f51 100644 --- a/kernel/drivers/usb/serial/kobil_sct.c +++ b/kernel/drivers/usb/serial/kobil_sct.c @@ -51,6 +51,7 @@ /* Function prototypes */ +static int kobil_attach(struct usb_serial *serial); static int kobil_port_probe(struct usb_serial_port *probe); static int kobil_port_remove(struct usb_serial_port *probe); static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port); @@ -86,6 +87,7 @@ static struct usb_serial_driver kobil_device = { .description = "KOBIL USB smart card terminal", .id_table = id_table, .num_ports = 1, + .attach = kobil_attach, .port_probe = kobil_port_probe, .port_remove = kobil_port_remove, .ioctl = kobil_ioctl, @@ -113,6 +115,16 @@ struct kobil_private { }; +static int kobil_attach(struct usb_serial *serial) +{ + if (serial->num_interrupt_out < serial->num_ports) { + dev_err(&serial->interface->dev, "missing interrupt-out endpoint\n"); + return -ENODEV; + } + + return 0; +} + static int kobil_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; diff --git a/kernel/drivers/usb/serial/mct_u232.c b/kernel/drivers/usb/serial/mct_u232.c index fd707d6a1..89726f702 100644 --- a/kernel/drivers/usb/serial/mct_u232.c +++ b/kernel/drivers/usb/serial/mct_u232.c @@ -376,14 +376,21 @@ static void mct_u232_msr_to_state(struct usb_serial_port *port, static int mct_u232_port_probe(struct usb_serial_port *port) { + struct usb_serial *serial = port->serial; struct mct_u232_private *priv; + /* check first to simplify error handling */ + if (!serial->port[1] || !serial->port[1]->interrupt_in_urb) { + dev_err(&port->dev, "expected endpoint missing\n"); + return -ENODEV; + } + priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; /* Use second interrupt-in endpoint for reading. */ - priv->read_urb = port->serial->port[1]->interrupt_in_urb; + priv->read_urb = serial->port[1]->interrupt_in_urb; priv->read_urb->context = port; spin_lock_init(&priv->lock); diff --git a/kernel/drivers/usb/serial/mos7720.c b/kernel/drivers/usb/serial/mos7720.c index 78b4f64c6..e56cdb436 100644 --- a/kernel/drivers/usb/serial/mos7720.c +++ b/kernel/drivers/usb/serial/mos7720.c @@ -65,8 +65,6 @@ struct moschip_port { struct urb *write_urb_pool[NUM_URBS]; }; -static struct usb_serial_driver moschip7720_2port_driver; - #define USB_VENDOR_ID_MOSCHIP 0x9710 #define MOSCHIP_DEVICE_ID_7720 0x7720 #define MOSCHIP_DEVICE_ID_7715 0x7715 @@ -970,25 +968,6 @@ static void mos7720_bulk_out_data_callback(struct urb *urb) tty_port_tty_wakeup(&mos7720_port->port->port); } -/* - * mos77xx_probe - * this function installs the appropriate read interrupt endpoint callback - * depending on whether the device is a 7720 or 7715, thus avoiding costly - * run-time checks in the high-frequency callback routine itself. - */ -static int mos77xx_probe(struct usb_serial *serial, - const struct usb_device_id *id) -{ - if (id->idProduct == MOSCHIP_DEVICE_ID_7715) - moschip7720_2port_driver.read_int_callback = - mos7715_interrupt_callback; - else - moschip7720_2port_driver.read_int_callback = - mos7720_interrupt_callback; - - return 0; -} - static int mos77xx_calc_num_ports(struct usb_serial *serial) { u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); @@ -1252,7 +1231,7 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, if (urb->transfer_buffer == NULL) { urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, - GFP_KERNEL); + GFP_ATOMIC); if (!urb->transfer_buffer) goto exit; } @@ -1920,6 +1899,11 @@ static int mos7720_startup(struct usb_serial *serial) u16 product; int ret_val; + if (serial->num_bulk_in < 2 || serial->num_bulk_out < 2) { + dev_err(&serial->interface->dev, "missing bulk endpoints\n"); + return -ENODEV; + } + product = le16_to_cpu(serial->dev->descriptor.idProduct); dev = serial->dev; @@ -1944,19 +1928,18 @@ static int mos7720_startup(struct usb_serial *serial) tmp->interrupt_in_endpointAddress; serial->port[1]->interrupt_in_urb = NULL; serial->port[1]->interrupt_in_buffer = NULL; + + if (serial->port[0]->interrupt_in_urb) { + struct urb *urb = serial->port[0]->interrupt_in_urb; + + urb->complete = mos7715_interrupt_callback; + } } /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000); - /* start the interrupt urb */ - ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); - if (ret_val) - dev_err(&dev->dev, - "%s - Error %d submitting control urb\n", - __func__, ret_val); - #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT if (product == MOSCHIP_DEVICE_ID_7715) { ret_val = mos7715_parport_init(serial); @@ -1964,6 +1947,13 @@ static int mos7720_startup(struct usb_serial *serial) return ret_val; } #endif + /* start the interrupt urb */ + ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); + if (ret_val) { + dev_err(&dev->dev, "failed to submit interrupt urb: %d\n", + ret_val); + } + /* LSR For Port 1 */ read_mos_reg(serial, 0, MOS7720_LSR, &data); dev_dbg(&dev->dev, "LSR:%x\n", data); @@ -1973,6 +1963,8 @@ static int mos7720_startup(struct usb_serial *serial) static void mos7720_release(struct usb_serial *serial) { + usb_kill_urb(serial->port[0]->interrupt_in_urb); + #ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT /* close the parallel port */ @@ -2007,6 +1999,7 @@ static void mos7720_release(struct usb_serial *serial) urblist_entry) usb_unlink_urb(urbtrack->urb); spin_unlock_irqrestore(&mos_parport->listlock, flags); + parport_del_port(mos_parport->pp); kref_put(&mos_parport->ref_count, destroy_mos_parport); } @@ -2055,7 +2048,6 @@ static struct usb_serial_driver moschip7720_2port_driver = { .close = mos7720_close, .throttle = mos7720_throttle, .unthrottle = mos7720_unthrottle, - .probe = mos77xx_probe, .attach = mos7720_startup, .release = mos7720_release, .port_probe = mos7720_port_probe, @@ -2069,7 +2061,7 @@ static struct usb_serial_driver moschip7720_2port_driver = { .chars_in_buffer = mos7720_chars_in_buffer, .break_ctl = mos7720_break, .read_bulk_callback = mos7720_bulk_in_callback, - .read_int_callback = NULL /* dynamically assigned in probe() */ + .read_int_callback = mos7720_interrupt_callback, }; static struct usb_serial_driver * const serial_drivers[] = { diff --git a/kernel/drivers/usb/serial/mos7840.c b/kernel/drivers/usb/serial/mos7840.c index 8ac9b55f0..97ea52b5c 100644 --- a/kernel/drivers/usb/serial/mos7840.c +++ b/kernel/drivers/usb/serial/mos7840.c @@ -1340,8 +1340,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, } if (urb->transfer_buffer == NULL) { - urb->transfer_buffer = - kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); + urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, + GFP_ATOMIC); if (!urb->transfer_buffer) goto exit; } @@ -2116,6 +2116,17 @@ static int mos7840_calc_num_ports(struct usb_serial *serial) return mos7840_num_ports; } +static int mos7840_attach(struct usb_serial *serial) +{ + if (serial->num_bulk_in < serial->num_ports || + serial->num_bulk_out < serial->num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int mos7840_port_probe(struct usb_serial_port *port) { struct usb_serial *serial = port->serial; @@ -2391,6 +2402,7 @@ static struct usb_serial_driver moschip7840_4port_device = { .tiocmset = mos7840_tiocmset, .tiocmiwait = usb_serial_generic_tiocmiwait, .get_icount = usb_serial_generic_get_icount, + .attach = mos7840_attach, .port_probe = mos7840_port_probe, .port_remove = mos7840_port_remove, .read_bulk_callback = mos7840_bulk_in_callback, diff --git a/kernel/drivers/usb/serial/mxuport.c b/kernel/drivers/usb/serial/mxuport.c index 31a8b47f1..c6596cbcc 100644 --- a/kernel/drivers/usb/serial/mxuport.c +++ b/kernel/drivers/usb/serial/mxuport.c @@ -1259,6 +1259,15 @@ static int mxuport_attach(struct usb_serial *serial) return 0; } +static void mxuport_release(struct usb_serial *serial) +{ + struct usb_serial_port *port0 = serial->port[0]; + struct usb_serial_port *port1 = serial->port[1]; + + usb_serial_generic_close(port1); + usb_serial_generic_close(port0); +} + static int mxuport_open(struct tty_struct *tty, struct usb_serial_port *port) { struct mxuport_port *mxport = usb_get_serial_port_data(port); @@ -1361,6 +1370,7 @@ static struct usb_serial_driver mxuport_device = { .probe = mxuport_probe, .port_probe = mxuport_port_probe, .attach = mxuport_attach, + .release = mxuport_release, .calc_num_ports = mxuport_calc_num_ports, .open = mxuport_open, .close = mxuport_close, diff --git a/kernel/drivers/usb/serial/omninet.c b/kernel/drivers/usb/serial/omninet.c index f6c6900bc..a180b17d2 100644 --- a/kernel/drivers/usb/serial/omninet.c +++ b/kernel/drivers/usb/serial/omninet.c @@ -38,6 +38,7 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); static int omninet_write_room(struct tty_struct *tty); static void omninet_disconnect(struct usb_serial *serial); +static int omninet_attach(struct usb_serial *serial); static int omninet_port_probe(struct usb_serial_port *port); static int omninet_port_remove(struct usb_serial_port *port); @@ -56,6 +57,7 @@ static struct usb_serial_driver zyxel_omninet_device = { .description = "ZyXEL - omni.net lcd plus usb", .id_table = id_table, .num_ports = 1, + .attach = omninet_attach, .port_probe = omninet_port_probe, .port_remove = omninet_port_remove, .open = omninet_open, @@ -104,6 +106,17 @@ struct omninet_data { __u8 od_outseq; /* Sequence number for bulk_out URBs */ }; +static int omninet_attach(struct usb_serial *serial) +{ + /* The second bulk-out endpoint is used for writing. */ + if (serial->num_bulk_out < 2) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int omninet_port_probe(struct usb_serial_port *port) { struct omninet_data *od; diff --git a/kernel/drivers/usb/serial/option.c b/kernel/drivers/usb/serial/option.c index 348e19834..42cc72e54 100644 --- a/kernel/drivers/usb/serial/option.c +++ b/kernel/drivers/usb/serial/option.c @@ -268,11 +268,20 @@ static void option_instat_callback(struct urb *urb); #define TELIT_PRODUCT_CC864_SINGLE 0x1006 #define TELIT_PRODUCT_DE910_DUAL 0x1010 #define TELIT_PRODUCT_UE910_V2 0x1012 +#define TELIT_PRODUCT_LE922_USBCFG1 0x1040 +#define TELIT_PRODUCT_LE922_USBCFG2 0x1041 #define TELIT_PRODUCT_LE922_USBCFG0 0x1042 #define TELIT_PRODUCT_LE922_USBCFG3 0x1043 #define TELIT_PRODUCT_LE922_USBCFG5 0x1045 #define TELIT_PRODUCT_LE920 0x1200 #define TELIT_PRODUCT_LE910 0x1201 +#define TELIT_PRODUCT_LE910_USBCFG4 0x1206 +#define TELIT_PRODUCT_LE920A4_1207 0x1207 +#define TELIT_PRODUCT_LE920A4_1208 0x1208 +#define TELIT_PRODUCT_LE920A4_1211 0x1211 +#define TELIT_PRODUCT_LE920A4_1212 0x1212 +#define TELIT_PRODUCT_LE920A4_1213 0x1213 +#define TELIT_PRODUCT_LE920A4_1214 0x1214 /* ZTE PRODUCTS */ #define ZTE_VENDOR_ID 0x19d2 @@ -375,18 +384,22 @@ static void option_instat_callback(struct urb *urb); #define HAIER_PRODUCT_CE81B 0x10f8 #define HAIER_PRODUCT_CE100 0x2009 -/* Cinterion (formerly Siemens) products */ -#define SIEMENS_VENDOR_ID 0x0681 -#define CINTERION_VENDOR_ID 0x1e2d +/* Gemalto's Cinterion products (formerly Siemens) */ +#define SIEMENS_VENDOR_ID 0x0681 +#define CINTERION_VENDOR_ID 0x1e2d +#define CINTERION_PRODUCT_HC25_MDMNET 0x0040 #define CINTERION_PRODUCT_HC25_MDM 0x0047 -#define CINTERION_PRODUCT_HC25_MDMNET 0x0040 +#define CINTERION_PRODUCT_HC28_MDMNET 0x004A /* same for HC28J */ #define CINTERION_PRODUCT_HC28_MDM 0x004C -#define CINTERION_PRODUCT_HC28_MDMNET 0x004A /* same for HC28J */ #define CINTERION_PRODUCT_EU3_E 0x0051 #define CINTERION_PRODUCT_EU3_P 0x0052 #define CINTERION_PRODUCT_PH8 0x0053 #define CINTERION_PRODUCT_AHXX 0x0055 #define CINTERION_PRODUCT_PLXX 0x0060 +#define CINTERION_PRODUCT_PH8_2RMNET 0x0082 +#define CINTERION_PRODUCT_PH8_AUDIO 0x0083 +#define CINTERION_PRODUCT_AHXX_2RMNET 0x0084 +#define CINTERION_PRODUCT_AHXX_AUDIO 0x0085 /* Olivetti products */ #define OLIVETTI_VENDOR_ID 0x0b3c @@ -514,6 +527,12 @@ static void option_instat_callback(struct urb *urb); #define VIATELECOM_VENDOR_ID 0x15eb #define VIATELECOM_PRODUCT_CDS7 0x0001 +/* WeTelecom products */ +#define WETELECOM_VENDOR_ID 0x22de +#define WETELECOM_PRODUCT_WMD200 0x6801 +#define WETELECOM_PRODUCT_6802 0x6802 +#define WETELECOM_PRODUCT_WMD300 0x6803 + struct option_blacklist_info { /* bitmask of interface numbers blacklisted for send_setup */ const unsigned long sendsetup; @@ -623,6 +642,11 @@ static const struct option_blacklist_info telit_le920_blacklist = { .reserved = BIT(1) | BIT(5), }; +static const struct option_blacklist_info telit_le920a4_blacklist_1 = { + .sendsetup = BIT(0), + .reserved = BIT(1), +}; + static const struct option_blacklist_info telit_le922_blacklist_usbcfg0 = { .sendsetup = BIT(2), .reserved = BIT(0) | BIT(1) | BIT(3), @@ -633,6 +657,10 @@ static const struct option_blacklist_info telit_le922_blacklist_usbcfg3 = { .reserved = BIT(1) | BIT(2) | BIT(3), }; +static const struct option_blacklist_info cinterion_rmnet2_blacklist = { + .reserved = BIT(4) | BIT(5), +}; + static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -1184,14 +1212,30 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG0), .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG1), + .driver_info = (kernel_ulong_t)&telit_le910_blacklist }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG2), + .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG3), .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff), .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910), .driver_info = (kernel_ulong_t)&telit_le910_blacklist }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4), + .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920), .driver_info = (kernel_ulong_t)&telit_le920_blacklist }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1207) }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1208), + .driver_info = (kernel_ulong_t)&telit_le920a4_blacklist_1 }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1211), + .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1212), + .driver_info = (kernel_ulong_t)&telit_le920a4_blacklist_1 }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1213, 0xff) }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1214), + .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, @@ -1602,7 +1646,79 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffe9, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff42, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff43, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff44, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff45, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff46, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff47, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff48, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff49, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4a, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4b, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4c, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4d, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4e, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff4f, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff50, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff51, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff52, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff53, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff54, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff55, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff56, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff57, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff58, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff59, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5a, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5b, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5c, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5d, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5e, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff5f, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff60, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff61, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff62, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff63, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff64, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff65, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff66, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff67, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff68, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff69, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6a, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6b, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6c, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6d, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6e, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff6f, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff70, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff71, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff72, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff73, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff74, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff75, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff76, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff77, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff78, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff79, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7a, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7b, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7c, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7d, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7e, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff7f, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff80, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff81, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff82, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff83, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff84, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff85, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff86, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff87, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff88, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff89, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8a, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8b, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8c, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8d, 0xff, 0xff, 0xff) }, @@ -1613,6 +1729,61 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff92, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff9f, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa0, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa1, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa2, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa3, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa4, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa5, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa6, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa7, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa8, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffa9, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffaa, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffab, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffac, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffae, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffaf, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb0, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb1, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb2, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb3, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb4, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb5, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb6, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb7, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb8, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffb9, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffba, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbb, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbc, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbd, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbe, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffbf, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc0, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc1, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc2, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc3, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc4, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc5, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc6, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc7, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc8, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffc9, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffca, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffcb, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffcc, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffcd, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffce, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffcf, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd0, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd1, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd2, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd3, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd4, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffd5, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffe9, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffec, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffee, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff6, 0xff, 0xff, 0xff) }, @@ -1712,7 +1883,13 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX, 0xff) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, - { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_2RMNET, 0xff), + .driver_info = (kernel_ulong_t)&cinterion_rmnet2_blacklist }, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_AUDIO, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_2RMNET, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_AUDIO, 0xff) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) }, { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) }, { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDMNET) }, @@ -1818,11 +1995,19 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x00, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x02, 0x01) }, { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) }, + { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff) }, /* D-Link DWM-158 */ + { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e19, 0xff), /* D-Link DWM-221 B1 */ + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */ { USB_DEVICE_INTERFACE_CLASS(0x2020, 0x4000, 0xff) }, /* OLICARD300 - MT6225 */ { USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) }, { USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) }, + { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_6802, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD300, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) }, /* HP lt2523 (Novatel E371) */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/kernel/drivers/usb/serial/oti6858.c b/kernel/drivers/usb/serial/oti6858.c index a4b88bc03..b8bf52bf7 100644 --- a/kernel/drivers/usb/serial/oti6858.c +++ b/kernel/drivers/usb/serial/oti6858.c @@ -134,6 +134,7 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty); static int oti6858_tiocmget(struct tty_struct *tty); static int oti6858_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear); +static int oti6858_attach(struct usb_serial *serial); static int oti6858_port_probe(struct usb_serial_port *port); static int oti6858_port_remove(struct usb_serial_port *port); @@ -158,6 +159,7 @@ static struct usb_serial_driver oti6858_device = { .write_bulk_callback = oti6858_write_bulk_callback, .write_room = oti6858_write_room, .chars_in_buffer = oti6858_chars_in_buffer, + .attach = oti6858_attach, .port_probe = oti6858_port_probe, .port_remove = oti6858_port_remove, }; @@ -324,6 +326,20 @@ static void send_data(struct work_struct *work) usb_serial_port_softint(port); } +static int oti6858_attach(struct usb_serial *serial) +{ + unsigned char num_ports = serial->num_ports; + + if (serial->num_bulk_in < num_ports || + serial->num_bulk_out < num_ports || + serial->num_interrupt_in < num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int oti6858_port_probe(struct usb_serial_port *port) { struct oti6858_private *priv; diff --git a/kernel/drivers/usb/serial/pl2303.c b/kernel/drivers/usb/serial/pl2303.c index ae682e4ee..1db4b61bd 100644 --- a/kernel/drivers/usb/serial/pl2303.c +++ b/kernel/drivers/usb/serial/pl2303.c @@ -49,6 +49,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) }, + { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) }, { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) }, { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) }, { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) }, @@ -220,9 +221,17 @@ static int pl2303_probe(struct usb_serial *serial, static int pl2303_startup(struct usb_serial *serial) { struct pl2303_serial_private *spriv; + unsigned char num_ports = serial->num_ports; enum pl2303_type type = TYPE_01; unsigned char *buf; + if (serial->num_bulk_in < num_ports || + serial->num_bulk_out < num_ports || + serial->num_interrupt_in < num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); if (!spriv) return -ENOMEM; diff --git a/kernel/drivers/usb/serial/pl2303.h b/kernel/drivers/usb/serial/pl2303.h index e3b7af8ad..09d9be882 100644 --- a/kernel/drivers/usb/serial/pl2303.h +++ b/kernel/drivers/usb/serial/pl2303.h @@ -27,6 +27,7 @@ #define ATEN_VENDOR_ID 0x0557 #define ATEN_VENDOR_ID2 0x0547 #define ATEN_PRODUCT_ID 0x2008 +#define ATEN_PRODUCT_ID2 0x2118 #define IODATA_VENDOR_ID 0x04bb #define IODATA_PRODUCT_ID 0x0a03 diff --git a/kernel/drivers/usb/serial/qcserial.c b/kernel/drivers/usb/serial/qcserial.c index 1bc6089b9..696458db7 100644 --- a/kernel/drivers/usb/serial/qcserial.c +++ b/kernel/drivers/usb/serial/qcserial.c @@ -124,6 +124,7 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x1410, 0xa021)}, /* Novatel Gobi 3000 Composite */ {USB_DEVICE(0x413c, 0x8193)}, /* Dell Gobi 3000 QDL */ {USB_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */ + {USB_DEVICE(0x413c, 0x81a6)}, /* Dell DW5570 QDL (MC8805) */ {USB_DEVICE(0x1199, 0x68a4)}, /* Sierra Wireless QDL */ {USB_DEVICE(0x1199, 0x68a5)}, /* Sierra Wireless Modem */ {USB_DEVICE(0x1199, 0x68a8)}, /* Sierra Wireless QDL */ diff --git a/kernel/drivers/usb/serial/quatech2.c b/kernel/drivers/usb/serial/quatech2.c index 504f5bff7..a3ed07c58 100644 --- a/kernel/drivers/usb/serial/quatech2.c +++ b/kernel/drivers/usb/serial/quatech2.c @@ -141,6 +141,7 @@ static void qt2_release(struct usb_serial *serial) serial_priv = usb_get_serial_data(serial); + usb_kill_urb(serial_priv->read_urb); usb_free_urb(serial_priv->read_urb); kfree(serial_priv->read_buffer); kfree(serial_priv); @@ -407,16 +408,12 @@ static void qt2_close(struct usb_serial_port *port) { struct usb_serial *serial; struct qt2_port_private *port_priv; - unsigned long flags; int i; serial = port->serial; port_priv = usb_get_serial_port_data(port); - spin_lock_irqsave(&port_priv->urb_lock, flags); usb_kill_urb(port_priv->write_urb); - port_priv->urb_in_use = false; - spin_unlock_irqrestore(&port_priv->urb_lock, flags); /* flush the port transmit buffer */ i = usb_control_msg(serial->dev, diff --git a/kernel/drivers/usb/serial/spcp8x5.c b/kernel/drivers/usb/serial/spcp8x5.c index ef0dbf070..475e6c31b 100644 --- a/kernel/drivers/usb/serial/spcp8x5.c +++ b/kernel/drivers/usb/serial/spcp8x5.c @@ -154,6 +154,19 @@ static int spcp8x5_probe(struct usb_serial *serial, return 0; } +static int spcp8x5_attach(struct usb_serial *serial) +{ + unsigned char num_ports = serial->num_ports; + + if (serial->num_bulk_in < num_ports || + serial->num_bulk_out < num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + return 0; +} + static int spcp8x5_port_probe(struct usb_serial_port *port) { const struct usb_device_id *id = usb_get_serial_data(port->serial); @@ -477,6 +490,7 @@ static struct usb_serial_driver spcp8x5_device = { .tiocmget = spcp8x5_tiocmget, .tiocmset = spcp8x5_tiocmset, .probe = spcp8x5_probe, + .attach = spcp8x5_attach, .port_probe = spcp8x5_port_probe, .port_remove = spcp8x5_port_remove, }; diff --git a/kernel/drivers/usb/serial/ti_usb_3410_5052.c b/kernel/drivers/usb/serial/ti_usb_3410_5052.c index 2694df2f4..535fcfafc 100644 --- a/kernel/drivers/usb/serial/ti_usb_3410_5052.c +++ b/kernel/drivers/usb/serial/ti_usb_3410_5052.c @@ -339,6 +339,13 @@ static int ti_startup(struct usb_serial *serial) goto free_tdev; } + if (serial->num_bulk_in < serial->num_ports || + serial->num_bulk_out < serial->num_ports) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + status = -ENODEV; + goto free_tdev; + } + return 0; free_tdev: diff --git a/kernel/drivers/usb/serial/usb-serial-simple.c b/kernel/drivers/usb/serial/usb-serial-simple.c index a204782ae..e98b6e57b 100644 --- a/kernel/drivers/usb/serial/usb-serial-simple.c +++ b/kernel/drivers/usb/serial/usb-serial-simple.c @@ -54,7 +54,8 @@ DEVICE(funsoft, FUNSOFT_IDS); /* Infineon Flashloader driver */ #define FLASHLOADER_IDS() \ { USB_DEVICE_INTERFACE_CLASS(0x058b, 0x0041, USB_CLASS_CDC_DATA) }, \ - { USB_DEVICE(0x8087, 0x0716) } + { USB_DEVICE(0x8087, 0x0716) }, \ + { USB_DEVICE(0x8087, 0x0801) } DEVICE(flashloader, FLASHLOADER_IDS); /* Google Serial USB SubClass */ diff --git a/kernel/drivers/usb/serial/usb-serial.c b/kernel/drivers/usb/serial/usb-serial.c index 46f1f13b4..e7e29c797 100644 --- a/kernel/drivers/usb/serial/usb-serial.c +++ b/kernel/drivers/usb/serial/usb-serial.c @@ -1077,7 +1077,8 @@ static int usb_serial_probe(struct usb_interface *interface, serial->disconnected = 0; - usb_serial_console_init(serial->port[0]->minor); + if (num_ports > 0) + usb_serial_console_init(serial->port[0]->minor); exit: module_put(type->driver.owner); return 0; @@ -1432,7 +1433,7 @@ int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[] rc = usb_register(udriver); if (rc) - return rc; + goto failed_usb_register; for (sd = serial_drivers; *sd; ++sd) { (*sd)->usb_driver = udriver; @@ -1450,6 +1451,8 @@ int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[] while (sd-- > serial_drivers) usb_serial_deregister(*sd); usb_deregister(udriver); +failed_usb_register: + kfree(udriver); return rc; } EXPORT_SYMBOL_GPL(usb_serial_register_drivers); diff --git a/kernel/drivers/usb/storage/transport.c b/kernel/drivers/usb/storage/transport.c index 5e67f63b2..02f86dd1a 100644 --- a/kernel/drivers/usb/storage/transport.c +++ b/kernel/drivers/usb/storage/transport.c @@ -919,10 +919,15 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us) /* COMMAND STAGE */ /* let's send the command via the control pipe */ + /* + * Command is sometime (f.e. after scsi_eh_prep_cmnd) on the stack. + * Stack may be vmallocated. So no DMA for us. Make a copy. + */ + memcpy(us->iobuf, srb->cmnd, srb->cmd_len); result = usb_stor_ctrl_transfer(us, us->send_ctrl_pipe, US_CBI_ADSC, USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, - us->ifnum, srb->cmnd, srb->cmd_len); + us->ifnum, us->iobuf, srb->cmd_len); /* check the return code for the command */ usb_stor_dbg(us, "Call to usb_stor_ctrl_transfer() returned %d\n", diff --git a/kernel/drivers/usb/storage/uas.c b/kernel/drivers/usb/storage/uas.c index 5c66d3f7a..e26e32169 100644 --- a/kernel/drivers/usb/storage/uas.c +++ b/kernel/drivers/usb/storage/uas.c @@ -2,7 +2,7 @@ * USB Attached SCSI * Note that this is not the same as the USB Mass Storage driver * - * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2014 + * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2016 * Copyright Matthew Wilcox for Intel Corp, 2010 * Copyright Sarah Sharp for Intel Corp, 2010 * @@ -757,6 +757,17 @@ static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd) return SUCCESS; } +static int uas_target_alloc(struct scsi_target *starget) +{ + struct uas_dev_info *devinfo = (struct uas_dev_info *) + dev_to_shost(starget->dev.parent)->hostdata; + + if (devinfo->flags & US_FL_NO_REPORT_LUNS) + starget->no_report_luns = 1; + + return 0; +} + static int uas_slave_alloc(struct scsi_device *sdev) { struct uas_dev_info *devinfo = @@ -808,11 +819,12 @@ static struct scsi_host_template uas_host_template = { .module = THIS_MODULE, .name = "uas", .queuecommand = uas_queuecommand, + .target_alloc = uas_target_alloc, .slave_alloc = uas_slave_alloc, .slave_configure = uas_slave_configure, .eh_abort_handler = uas_eh_abort_handler, .eh_bus_reset_handler = uas_eh_bus_reset_handler, - .can_queue = 65536, /* Is there a limit on the _host_ ? */ + .can_queue = MAX_CMNDS, .this_id = -1, .sg_tablesize = SG_NONE, .skip_settle_delay = 1, @@ -932,6 +944,12 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id) if (result) goto set_alt0; + /* + * 1 tag is reserved for untagged commands + + * 1 tag to avoid off by one errors in some bridge firmwares + */ + shost->can_queue = devinfo->qdepth - 2; + usb_set_intfdata(intf, shost); result = scsi_add_host(shost, &intf->dev); if (result) diff --git a/kernel/drivers/usb/storage/unusual_devs.h b/kernel/drivers/usb/storage/unusual_devs.h index 7ffe42090..640a2e2ec 100644 --- a/kernel/drivers/usb/storage/unusual_devs.h +++ b/kernel/drivers/usb/storage/unusual_devs.h @@ -2135,6 +2135,13 @@ UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY | US_FL_IGNORE_RESIDUE ), +/* Reported-by George Cherian <george.cherian@cavium.com> */ +UNUSUAL_DEV(0x152d, 0x9561, 0x0000, 0x9999, + "JMicron", + "JMS56x", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_REPORT_OPCODES), + /* * Patch by Constantin Baranov <const@tltsu.ru> * Report by Andreas Koenecke. diff --git a/kernel/drivers/usb/storage/unusual_uas.h b/kernel/drivers/usb/storage/unusual_uas.h index ccc113e83..53341a77d 100644 --- a/kernel/drivers/usb/storage/unusual_uas.h +++ b/kernel/drivers/usb/storage/unusual_uas.h @@ -64,6 +64,13 @@ UNUSUAL_DEV(0x0bc2, 0x3312, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_ATA_1X), +/* Reported-by: David Webb <djw@noc.ac.uk> */ +UNUSUAL_DEV(0x0bc2, 0x331a, 0x0000, 0x9999, + "Seagate", + "Expansion Desk", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_REPORT_LUNS), + /* Reported-by: Hans de Goede <hdegoede@redhat.com> */ UNUSUAL_DEV(0x0bc2, 0x3320, 0x0000, 0x9999, "Seagate", diff --git a/kernel/drivers/usb/storage/usb.c b/kernel/drivers/usb/storage/usb.c index 43576ed31..9de988a0f 100644 --- a/kernel/drivers/usb/storage/usb.c +++ b/kernel/drivers/usb/storage/usb.c @@ -482,7 +482,7 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags) US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 | US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE | US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES | - US_FL_MAX_SECTORS_240); + US_FL_MAX_SECTORS_240 | US_FL_NO_REPORT_LUNS); p = quirks; while (*p) { @@ -532,6 +532,9 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags) case 'i': f |= US_FL_IGNORE_DEVICE; break; + case 'j': + f |= US_FL_NO_REPORT_LUNS; + break; case 'l': f |= US_FL_NOT_LOCKABLE; break; diff --git a/kernel/drivers/usb/usbip/usbip_common.c b/kernel/drivers/usb/usbip/usbip_common.c index facaaf003..e40da7759 100644 --- a/kernel/drivers/usb/usbip/usbip_common.c +++ b/kernel/drivers/usb/usbip/usbip_common.c @@ -741,6 +741,17 @@ int usbip_recv_xbuff(struct usbip_device *ud, struct urb *urb) if (!(size > 0)) return 0; + if (size > urb->transfer_buffer_length) { + /* should not happen, probably malicious packet */ + if (ud->side == USBIP_STUB) { + usbip_event_add(ud, SDEV_EVENT_ERROR_TCP); + return 0; + } else { + usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); + return -EPIPE; + } + } + ret = usbip_recv(ud->tcp_socket, urb->transfer_buffer, size); if (ret != size) { dev_err(&urb->dev->dev, "recv xbuf, %d\n", ret); |