diff options
Diffstat (limited to 'kernel/drivers/usb/storage/datafab.c')
| -rw-r--r-- | kernel/drivers/usb/storage/datafab.c | 758 |
1 files changed, 758 insertions, 0 deletions
diff --git a/kernel/drivers/usb/storage/datafab.c b/kernel/drivers/usb/storage/datafab.c new file mode 100644 index 000000000..7b17c2169 --- /dev/null +++ b/kernel/drivers/usb/storage/datafab.c @@ -0,0 +1,758 @@ +/* Driver for Datafab USB Compact Flash reader + * + * datafab driver v0.1: + * + * First release + * + * Current development and maintenance by: + * (c) 2000 Jimmie Mayfield (mayfield+datafab@sackheads.org) + * + * Many thanks to Robert Baruch for the SanDisk SmartMedia reader driver + * which I used as a template for this driver. + * + * Some bugfixes and scatter-gather code by Gregory P. Smith + * (greg-usb@electricrain.com) + * + * Fix for media change by Joerg Schneider (js@joergschneider.com) + * + * Other contributors: + * (c) 2002 Alan Stern <stern@rowland.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * This driver attempts to support USB CompactFlash reader/writer devices + * based on Datafab USB-to-ATA chips. It was specifically developed for the + * Datafab MDCFE-B USB CompactFlash reader but has since been found to work + * with a variety of Datafab-based devices from a number of manufacturers. + * I've received a report of this driver working with a Datafab-based + * SmartMedia device though please be aware that I'm personally unable to + * test SmartMedia support. + * + * This driver supports reading and writing. If you're truly paranoid, + * however, you can force the driver into a write-protected state by setting + * the WP enable bits in datafab_handle_mode_sense(). See the comments + * in that routine. + */ + +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" + +MODULE_DESCRIPTION("Driver for Datafab USB Compact Flash reader"); +MODULE_AUTHOR("Jimmie Mayfield <mayfield+datafab@sackheads.org>"); +MODULE_LICENSE("GPL"); + +struct datafab_info { + unsigned long sectors; /* total sector count */ + unsigned long ssize; /* sector size in bytes */ + signed char lun; /* used for dual-slot readers */ + + /* the following aren't used yet */ + unsigned char sense_key; + unsigned long sense_asc; /* additional sense code */ + unsigned long sense_ascq; /* additional sense code qualifier */ +}; + +static int datafab_determine_lun(struct us_data *us, + struct datafab_info *info); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) } + +static struct usb_device_id datafab_usb_ids[] = { +# include "unusual_datafab.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, datafab_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev datafab_unusual_dev_list[] = { +# include "unusual_datafab.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + +static inline int +datafab_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) { + if (len == 0) + return USB_STOR_XFER_GOOD; + + usb_stor_dbg(us, "len = %d\n", len); + return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + data, len, NULL); +} + + +static inline int +datafab_bulk_write(struct us_data *us, unsigned char *data, unsigned int len) { + if (len == 0) + return USB_STOR_XFER_GOOD; + + usb_stor_dbg(us, "len = %d\n", len); + return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + data, len, NULL); +} + + +static int datafab_read_data(struct us_data *us, + struct datafab_info *info, + u32 sector, + u32 sectors) +{ + unsigned char *command = us->iobuf; + unsigned char *buffer; + unsigned char thistime; + unsigned int totallen, alloclen; + int len, result; + unsigned int sg_offset = 0; + struct scatterlist *sg = NULL; + + // we're working in LBA mode. according to the ATA spec, + // we can support up to 28-bit addressing. I don't know if Datafab + // supports beyond 24-bit addressing. It's kind of hard to test + // since it requires > 8GB CF card. + // + if (sectors > 0x0FFFFFFF) + return USB_STOR_TRANSPORT_ERROR; + + if (info->lun == -1) { + result = datafab_determine_lun(us, info); + if (result != USB_STOR_TRANSPORT_GOOD) + return result; + } + + totallen = sectors * info->ssize; + + // Since we don't read more than 64 KB at a time, we have to create + // a bounce buffer and move the data a piece at a time between the + // bounce buffer and the actual transfer buffer. + + alloclen = min(totallen, 65536u); + buffer = kmalloc(alloclen, GFP_NOIO); + if (buffer == NULL) + return USB_STOR_TRANSPORT_ERROR; + + do { + // loop, never allocate or transfer more than 64k at once + // (min(128k, 255*info->ssize) is the real limit) + + len = min(totallen, alloclen); + thistime = (len / info->ssize) & 0xff; + + command[0] = 0; + command[1] = thistime; + command[2] = sector & 0xFF; + command[3] = (sector >> 8) & 0xFF; + command[4] = (sector >> 16) & 0xFF; + + command[5] = 0xE0 + (info->lun << 4); + command[5] |= (sector >> 24) & 0x0F; + command[6] = 0x20; + command[7] = 0x01; + + // send the read command + result = datafab_bulk_write(us, command, 8); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + // read the result + result = datafab_bulk_read(us, buffer, len); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + // Store the data in the transfer buffer + usb_stor_access_xfer_buf(buffer, len, us->srb, + &sg, &sg_offset, TO_XFER_BUF); + + sector += thistime; + totallen -= len; + } while (totallen > 0); + + kfree(buffer); + return USB_STOR_TRANSPORT_GOOD; + + leave: + kfree(buffer); + return USB_STOR_TRANSPORT_ERROR; +} + + +static int datafab_write_data(struct us_data *us, + struct datafab_info *info, + u32 sector, + u32 sectors) +{ + unsigned char *command = us->iobuf; + unsigned char *reply = us->iobuf; + unsigned char *buffer; + unsigned char thistime; + unsigned int totallen, alloclen; + int len, result; + unsigned int sg_offset = 0; + struct scatterlist *sg = NULL; + + // we're working in LBA mode. according to the ATA spec, + // we can support up to 28-bit addressing. I don't know if Datafab + // supports beyond 24-bit addressing. It's kind of hard to test + // since it requires > 8GB CF card. + // + if (sectors > 0x0FFFFFFF) + return USB_STOR_TRANSPORT_ERROR; + + if (info->lun == -1) { + result = datafab_determine_lun(us, info); + if (result != USB_STOR_TRANSPORT_GOOD) + return result; + } + + totallen = sectors * info->ssize; + + // Since we don't write more than 64 KB at a time, we have to create + // a bounce buffer and move the data a piece at a time between the + // bounce buffer and the actual transfer buffer. + + alloclen = min(totallen, 65536u); + buffer = kmalloc(alloclen, GFP_NOIO); + if (buffer == NULL) + return USB_STOR_TRANSPORT_ERROR; + + do { + // loop, never allocate or transfer more than 64k at once + // (min(128k, 255*info->ssize) is the real limit) + + len = min(totallen, alloclen); + thistime = (len / info->ssize) & 0xff; + + // Get the data from the transfer buffer + usb_stor_access_xfer_buf(buffer, len, us->srb, + &sg, &sg_offset, FROM_XFER_BUF); + + command[0] = 0; + command[1] = thistime; + command[2] = sector & 0xFF; + command[3] = (sector >> 8) & 0xFF; + command[4] = (sector >> 16) & 0xFF; + + command[5] = 0xE0 + (info->lun << 4); + command[5] |= (sector >> 24) & 0x0F; + command[6] = 0x30; + command[7] = 0x02; + + // send the command + result = datafab_bulk_write(us, command, 8); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + // send the data + result = datafab_bulk_write(us, buffer, len); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + // read the result + result = datafab_bulk_read(us, reply, 2); + if (result != USB_STOR_XFER_GOOD) + goto leave; + + if (reply[0] != 0x50 && reply[1] != 0) { + usb_stor_dbg(us, "Gah! write return code: %02x %02x\n", + reply[0], reply[1]); + result = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + sector += thistime; + totallen -= len; + } while (totallen > 0); + + kfree(buffer); + return USB_STOR_TRANSPORT_GOOD; + + leave: + kfree(buffer); + return USB_STOR_TRANSPORT_ERROR; +} + + +static int datafab_determine_lun(struct us_data *us, + struct datafab_info *info) +{ + // Dual-slot readers can be thought of as dual-LUN devices. + // We need to determine which card slot is being used. + // We'll send an IDENTIFY DEVICE command and see which LUN responds... + // + // There might be a better way of doing this? + + static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 }; + unsigned char *command = us->iobuf; + unsigned char *buf; + int count = 0, rc; + + if (!info) + return USB_STOR_TRANSPORT_ERROR; + + memcpy(command, scommand, 8); + buf = kmalloc(512, GFP_NOIO); + if (!buf) + return USB_STOR_TRANSPORT_ERROR; + + usb_stor_dbg(us, "locating...\n"); + + // we'll try 3 times before giving up... + // + while (count++ < 3) { + command[5] = 0xa0; + + rc = datafab_bulk_write(us, command, 8); + if (rc != USB_STOR_XFER_GOOD) { + rc = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + rc = datafab_bulk_read(us, buf, 512); + if (rc == USB_STOR_XFER_GOOD) { + info->lun = 0; + rc = USB_STOR_TRANSPORT_GOOD; + goto leave; + } + + command[5] = 0xb0; + + rc = datafab_bulk_write(us, command, 8); + if (rc != USB_STOR_XFER_GOOD) { + rc = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + rc = datafab_bulk_read(us, buf, 512); + if (rc == USB_STOR_XFER_GOOD) { + info->lun = 1; + rc = USB_STOR_TRANSPORT_GOOD; + goto leave; + } + + msleep(20); + } + + rc = USB_STOR_TRANSPORT_ERROR; + + leave: + kfree(buf); + return rc; +} + +static int datafab_id_device(struct us_data *us, + struct datafab_info *info) +{ + // this is a variation of the ATA "IDENTIFY DEVICE" command...according + // to the ATA spec, 'Sector Count' isn't used but the Windows driver + // sets this bit so we do too... + // + static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 }; + unsigned char *command = us->iobuf; + unsigned char *reply; + int rc; + + if (!info) + return USB_STOR_TRANSPORT_ERROR; + + if (info->lun == -1) { + rc = datafab_determine_lun(us, info); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + } + + memcpy(command, scommand, 8); + reply = kmalloc(512, GFP_NOIO); + if (!reply) + return USB_STOR_TRANSPORT_ERROR; + + command[5] += (info->lun << 4); + + rc = datafab_bulk_write(us, command, 8); + if (rc != USB_STOR_XFER_GOOD) { + rc = USB_STOR_TRANSPORT_ERROR; + goto leave; + } + + // we'll go ahead and extract the media capacity while we're here... + // + rc = datafab_bulk_read(us, reply, 512); + if (rc == USB_STOR_XFER_GOOD) { + // capacity is at word offset 57-58 + // + info->sectors = ((u32)(reply[117]) << 24) | + ((u32)(reply[116]) << 16) | + ((u32)(reply[115]) << 8) | + ((u32)(reply[114]) ); + rc = USB_STOR_TRANSPORT_GOOD; + goto leave; + } + + rc = USB_STOR_TRANSPORT_ERROR; + + leave: + kfree(reply); + return rc; +} + + +static int datafab_handle_mode_sense(struct us_data *us, + struct scsi_cmnd * srb, + int sense_6) +{ + static unsigned char rw_err_page[12] = { + 0x1, 0xA, 0x21, 1, 0, 0, 0, 0, 1, 0, 0, 0 + }; + static unsigned char cache_page[12] = { + 0x8, 0xA, 0x1, 0, 0, 0, 0, 0, 0, 0, 0, 0 + }; + static unsigned char rbac_page[12] = { + 0x1B, 0xA, 0, 0x81, 0, 0, 0, 0, 0, 0, 0, 0 + }; + static unsigned char timer_page[8] = { + 0x1C, 0x6, 0, 0, 0, 0 + }; + unsigned char pc, page_code; + unsigned int i = 0; + struct datafab_info *info = (struct datafab_info *) (us->extra); + unsigned char *ptr = us->iobuf; + + // most of this stuff is just a hack to get things working. the + // datafab reader doesn't present a SCSI interface so we + // fudge the SCSI commands... + // + + pc = srb->cmnd[2] >> 6; + page_code = srb->cmnd[2] & 0x3F; + + switch (pc) { + case 0x0: + usb_stor_dbg(us, "Current values\n"); + break; + case 0x1: + usb_stor_dbg(us, "Changeable values\n"); + break; + case 0x2: + usb_stor_dbg(us, "Default values\n"); + break; + case 0x3: + usb_stor_dbg(us, "Saves values\n"); + break; + } + + memset(ptr, 0, 8); + if (sense_6) { + ptr[2] = 0x00; // WP enable: 0x80 + i = 4; + } else { + ptr[3] = 0x00; // WP enable: 0x80 + i = 8; + } + + switch (page_code) { + default: + // vendor-specific mode + info->sense_key = 0x05; + info->sense_asc = 0x24; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; + + case 0x1: + memcpy(ptr + i, rw_err_page, sizeof(rw_err_page)); + i += sizeof(rw_err_page); + break; + + case 0x8: + memcpy(ptr + i, cache_page, sizeof(cache_page)); + i += sizeof(cache_page); + break; + + case 0x1B: + memcpy(ptr + i, rbac_page, sizeof(rbac_page)); + i += sizeof(rbac_page); + break; + + case 0x1C: + memcpy(ptr + i, timer_page, sizeof(timer_page)); + i += sizeof(timer_page); + break; + + case 0x3F: // retrieve all pages + memcpy(ptr + i, timer_page, sizeof(timer_page)); + i += sizeof(timer_page); + memcpy(ptr + i, rbac_page, sizeof(rbac_page)); + i += sizeof(rbac_page); + memcpy(ptr + i, cache_page, sizeof(cache_page)); + i += sizeof(cache_page); + memcpy(ptr + i, rw_err_page, sizeof(rw_err_page)); + i += sizeof(rw_err_page); + break; + } + + if (sense_6) + ptr[0] = i - 1; + else + ((__be16 *) ptr)[0] = cpu_to_be16(i - 2); + usb_stor_set_xfer_buf(ptr, i, srb); + + return USB_STOR_TRANSPORT_GOOD; +} + +static void datafab_info_destructor(void *extra) +{ + // this routine is a placeholder... + // currently, we don't allocate any extra memory so we're okay +} + + +// Transport for the Datafab MDCFE-B +// +static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + struct datafab_info *info; + int rc; + unsigned long block, blocks; + unsigned char *ptr = us->iobuf; + static unsigned char inquiry_reply[8] = { + 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00 + }; + + if (!us->extra) { + us->extra = kzalloc(sizeof(struct datafab_info), GFP_NOIO); + if (!us->extra) + return USB_STOR_TRANSPORT_ERROR; + + us->extra_destructor = datafab_info_destructor; + ((struct datafab_info *)us->extra)->lun = -1; + } + + info = (struct datafab_info *) (us->extra); + + if (srb->cmnd[0] == INQUIRY) { + usb_stor_dbg(us, "INQUIRY - Returning bogus response\n"); + memcpy(ptr, inquiry_reply, sizeof(inquiry_reply)); + fill_inquiry_response(us, ptr, 36); + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == READ_CAPACITY) { + info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec + rc = datafab_id_device(us, info); + if (rc != USB_STOR_TRANSPORT_GOOD) + return rc; + + usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n", + info->sectors, info->ssize); + + // build the reply + // we need the last sector, not the number of sectors + ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1); + ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize); + usb_stor_set_xfer_buf(ptr, 8, srb); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == MODE_SELECT_10) { + usb_stor_dbg(us, "Gah! MODE_SELECT_10\n"); + return USB_STOR_TRANSPORT_ERROR; + } + + // don't bother implementing READ_6 or WRITE_6. + // + if (srb->cmnd[0] == READ_10) { + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); + + usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n", + block, blocks); + return datafab_read_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == READ_12) { + // we'll probably never see a READ_12 but we'll do it anyway... + // + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | + ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); + + usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n", + block, blocks); + return datafab_read_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == WRITE_10) { + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); + + usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n", + block, blocks); + return datafab_write_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == WRITE_12) { + // we'll probably never see a WRITE_12 but we'll do it anyway... + // + block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | + ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); + + blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | + ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); + + usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n", + block, blocks); + return datafab_write_data(us, info, block, blocks); + } + + if (srb->cmnd[0] == TEST_UNIT_READY) { + usb_stor_dbg(us, "TEST_UNIT_READY\n"); + return datafab_id_device(us, info); + } + + if (srb->cmnd[0] == REQUEST_SENSE) { + usb_stor_dbg(us, "REQUEST_SENSE - Returning faked response\n"); + + // this response is pretty bogus right now. eventually if necessary + // we can set the correct sense data. so far though it hasn't been + // necessary + // + memset(ptr, 0, 18); + ptr[0] = 0xF0; + ptr[2] = info->sense_key; + ptr[7] = 11; + ptr[12] = info->sense_asc; + ptr[13] = info->sense_ascq; + usb_stor_set_xfer_buf(ptr, 18, srb); + + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == MODE_SENSE) { + usb_stor_dbg(us, "MODE_SENSE_6 detected\n"); + return datafab_handle_mode_sense(us, srb, 1); + } + + if (srb->cmnd[0] == MODE_SENSE_10) { + usb_stor_dbg(us, "MODE_SENSE_10 detected\n"); + return datafab_handle_mode_sense(us, srb, 0); + } + + if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { + // sure. whatever. not like we can stop the user from + // popping the media out of the device (no locking doors, etc) + // + return USB_STOR_TRANSPORT_GOOD; + } + + if (srb->cmnd[0] == START_STOP) { + /* this is used by sd.c'check_scsidisk_media_change to detect + media change */ + usb_stor_dbg(us, "START_STOP\n"); + /* the first datafab_id_device after a media change returns + an error (determined experimentally) */ + rc = datafab_id_device(us, info); + if (rc == USB_STOR_TRANSPORT_GOOD) { + info->sense_key = NO_SENSE; + srb->result = SUCCESS; + } else { + info->sense_key = UNIT_ATTENTION; + srb->result = SAM_STAT_CHECK_CONDITION; + } + return rc; + } + + usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n", + srb->cmnd[0], srb->cmnd[0]); + info->sense_key = 0x05; + info->sense_asc = 0x20; + info->sense_ascq = 0x00; + return USB_STOR_TRANSPORT_FAILED; +} + +static int datafab_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - datafab_usb_ids) + datafab_unusual_dev_list); + if (result) + return result; + + us->transport_name = "Datafab Bulk-Only"; + us->transport = datafab_transport; + us->transport_reset = usb_stor_Bulk_reset; + us->max_lun = 1; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver datafab_driver = { + .name = "ums-datafab", + .probe = datafab_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = datafab_usb_ids, + .soft_unbind = 1, + .no_dynamic_id = 1, +}; + +module_usb_driver(datafab_driver); |