diff options
Diffstat (limited to 'kernel/drivers/usb/serial')
83 files changed, 54614 insertions, 0 deletions
diff --git a/kernel/drivers/usb/serial/Kconfig b/kernel/drivers/usb/serial/Kconfig new file mode 100644 index 000000000..b7cf1982d --- /dev/null +++ b/kernel/drivers/usb/serial/Kconfig @@ -0,0 +1,716 @@ +# +# USB Serial device configuration +# + +menuconfig USB_SERIAL + tristate "USB Serial Converter support" + depends on TTY + ---help--- + Say Y here if you have a USB device that provides normal serial + ports, or acts like a serial device, and you want to connect it to + your USB bus. + + Please read <file:Documentation/usb/usb-serial.txt> for more + information on the specifics of the different devices that are + supported, and on how to use them. + + To compile this driver as a module, choose M here: the + module will be called usbserial. + +if USB_SERIAL + +config USB_SERIAL_CONSOLE + bool "USB Serial Console device support" + depends on USB_SERIAL=y + ---help--- + If you say Y here, it will be possible to use a USB to serial + converter port as the system console (the system console is the + device which receives all kernel messages and warnings and which + allows logins in single user mode). This could be useful if some + terminal or printer is connected to that serial port. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyUSB0". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + + If you don't have a VGA card installed and you say Y here, the + kernel will automatically use the first USB to serial converter + port, /dev/ttyUSB0, as system console. + + If unsure, say N. + +config USB_SERIAL_GENERIC + bool "USB Generic Serial Driver" + help + Say Y here if you want to use the generic USB serial driver. Please + read <file:Documentation/usb/usb-serial.txt> for more information on + using this driver. It is recommended that the "USB Serial converter + support" be compiled as a module for this driver to be used + properly. + +config USB_SERIAL_SIMPLE + tristate "USB Serial Simple Driver" + help + Say Y here to use the USB serial "simple" driver. This driver + handles a wide range of very simple devices, all in one + driver. Specifically, it supports: + - Suunto ANT+ USB device. + - Medtronic CareLink USB device + - Fundamental Software dongle. + - Google USB serial devices + - HP4x calculators + - a number of Motorola phones + - Novatel Wireless GPS receivers + - Siemens USB/MPI adapter. + - ViVOtech ViVOpay USB device. + - Infineon Modem Flashloader USB interface + - ZIO Motherboard USB serial interface + + To compile this driver as a module, choose M here: the module + will be called usb-serial-simple. + +config USB_SERIAL_AIRCABLE + tristate "USB AIRcable Bluetooth Dongle Driver" + help + Say Y here if you want to use USB AIRcable Bluetooth Dongle. + + To compile this driver as a module, choose M here: the module + will be called aircable. + +config USB_SERIAL_ARK3116 + tristate "USB ARK Micro 3116 USB Serial Driver" + help + Say Y here if you want to use a ARK Micro 3116 USB to Serial + device. + + To compile this driver as a module, choose M here: the + module will be called ark3116 + +config USB_SERIAL_BELKIN + tristate "USB Belkin and Peracom Single Port Serial Driver" + help + Say Y here if you want to use a Belkin USB Serial single port + adaptor (F5U103 is one of the model numbers) or the Peracom single + port USB to serial adapter. + + To compile this driver as a module, choose M here: the + module will be called belkin_sa. + +config USB_SERIAL_CH341 + tristate "USB Winchiphead CH341 Single Port Serial Driver" + help + Say Y here if you want to use a Winchiphead CH341 single port + USB to serial adapter. + + To compile this driver as a module, choose M here: the + module will be called ch341. + +config USB_SERIAL_WHITEHEAT + tristate "USB ConnectTech WhiteHEAT Serial Driver" + select USB_EZUSB_FX2 + help + Say Y here if you want to use a ConnectTech WhiteHEAT 4 port + USB to serial converter device. + + To compile this driver as a module, choose M here: the + module will be called whiteheat. + +config USB_SERIAL_DIGI_ACCELEPORT + tristate "USB Digi International AccelePort USB Serial Driver" + ---help--- + Say Y here if you want to use Digi AccelePort USB 2 or 4 devices, + 2 port (plus parallel port) and 4 port USB serial converters. The + parallel port on the USB 2 appears as a third serial port on Linux. + The Digi Acceleport USB 8 is not yet supported by this driver. + + This driver works under SMP with the usb-uhci driver. It does not + work under SMP with the uhci driver. + + To compile this driver as a module, choose M here: the + module will be called digi_acceleport. + +config USB_SERIAL_CP210X + tristate "USB CP210x family of UART Bridge Controllers" + help + Say Y here if you want to use a CP2101/CP2102/CP2103 based USB + to RS232 converters. + + To compile this driver as a module, choose M here: the + module will be called cp210x. + +config USB_SERIAL_CYPRESS_M8 + tristate "USB Cypress M8 USB Serial Driver" + help + Say Y here if you want to use a device that contains the Cypress + USB to Serial microcontroller, such as the DeLorme Earthmate GPS. + + Attempted SMP support... send bug reports! + + Supported microcontrollers in the CY4601 family are: + CY7C63741 CY7C63742 CY7C63743 CY7C64013 + + To compile this driver as a module, choose M here: the + module will be called cypress_m8. + +config USB_SERIAL_EMPEG + tristate "USB Empeg empeg-car Mark I/II Driver" + help + Say Y here if you want to connect to your Empeg empeg-car Mark I/II + mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...} + device node. See <file:Documentation/usb/usb-serial.txt> for more + tidbits of information. + + To compile this driver as a module, choose M here: the + module will be called empeg. + +config USB_SERIAL_FTDI_SIO + tristate "USB FTDI Single Port Serial Driver" + ---help--- + Say Y here if you want to use a FTDI SIO single port USB to serial + converter device. The implementation I have is called the USC-1000. + This driver has also be tested with the 245 and 232 devices. + + See <http://ftdi-usb-sio.sourceforge.net/> for more + information on this driver and the device. + + To compile this driver as a module, choose M here: the + module will be called ftdi_sio. + +config USB_SERIAL_VISOR + tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver" + help + Say Y here if you want to connect to your HandSpring Visor, Palm + m500 or m505 through its USB docking station. See + <http://usbvisor.sourceforge.net/index.php3> for more information on using this + driver. + + To compile this driver as a module, choose M here: the + module will be called visor. + +config USB_SERIAL_IPAQ + tristate "USB PocketPC PDA Driver" + help + Say Y here if you want to connect to your Compaq iPAQ, HP Jornada + or any other PDA running Windows CE 3.0 or PocketPC 2002 + using a USB cradle/cable. For information on using the driver, + read <file:Documentation/usb/usb-serial.txt>. + + To compile this driver as a module, choose M here: the + module will be called ipaq. + +config USB_SERIAL_IR + tristate "USB IR Dongle Serial Driver" + help + Say Y here if you want to enable simple serial support for USB IrDA + devices. This is useful if you do not want to use the full IrDA + stack. + + To compile this driver as a module, choose M here: the + module will be called ir-usb. + +config USB_SERIAL_EDGEPORT + tristate "USB Inside Out Edgeport Serial Driver" + ---help--- + Say Y here if you want to use any of the following devices from + Inside Out Networks (Digi): + Edgeport/4 + Rapidport/4 + Edgeport/4t + Edgeport/2 + Edgeport/4i + Edgeport/2i + Edgeport/421 + Edgeport/21 + Edgeport/8 + Edgeport/8 Dual + Edgeport/2D8 + Edgeport/4D8 + Edgeport/8i + Edgeport/2 DIN + Edgeport/4 DIN + Edgeport/16 Dual + + To compile this driver as a module, choose M here: the + module will be called io_edgeport. + +config USB_SERIAL_EDGEPORT_TI + tristate "USB Inside Out Edgeport Serial Driver (TI devices)" + help + Say Y here if you want to use any of the devices from Inside Out + Networks (Digi) that are not supported by the io_edgeport driver. + This includes the Edgeport/1 device. + + To compile this driver as a module, choose M here: the + module will be called io_ti. + +config USB_SERIAL_F81232 + tristate "USB Fintek F81232 Single Port Serial Driver" + help + Say Y here if you want to use the Fintek F81232 single + port usb to serial adapter. + + To compile this driver as a module, choose M here: the + module will be called f81232. + +config USB_SERIAL_GARMIN + tristate "USB Garmin GPS driver" + help + Say Y here if you want to connect to your Garmin GPS. + Should work with most Garmin GPS devices which have a native USB port. + + See <http://sourceforge.net/projects/garmin-gps> for the latest + version of the driver. + + To compile this driver as a module, choose M here: the + module will be called garmin_gps. + +config USB_SERIAL_IPW + tristate "USB IPWireless (3G UMTS TDD) Driver" + select USB_SERIAL_WWAN + help + Say Y here if you want to use a IPWireless USB modem such as + the ones supplied by Axity3G/Sentech South Africa. + + To compile this driver as a module, choose M here: the + module will be called ipw. + +config USB_SERIAL_IUU + tristate "USB Infinity USB Unlimited Phoenix Driver" + help + Say Y here if you want to use a IUU in phoenix mode and get + an extra ttyUSBx device. More information available on + http://eczema.ecze.com/iuu_phoenix.html + + To compile this driver as a module, choose M here: the + module will be called iuu_phoenix.o + +config USB_SERIAL_KEYSPAN_PDA + tristate "USB Keyspan PDA Single Port Serial Driver" + select USB_EZUSB_FX2 + help + Say Y here if you want to use a Keyspan PDA single port USB to + serial converter device. This driver makes use of firmware + developed from scratch by Brian Warner. + + To compile this driver as a module, choose M here: the + module will be called keyspan_pda. + +config USB_SERIAL_KEYSPAN + tristate "USB Keyspan USA-xxx Serial Driver" + select USB_EZUSB_FX2 + ---help--- + Say Y here if you want to use Keyspan USB to serial converter + devices. This driver makes use of Keyspan's official firmware + and was developed with their support. You must also include + firmware to support your particular device(s). + + See <http://blemings.org/hugh/keyspan.html> for more information. + + To compile this driver as a module, choose M here: the + module will be called keyspan. + +config USB_SERIAL_KEYSPAN_MPR + bool "USB Keyspan MPR Firmware" + depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + help + Say Y here to include firmware for the Keyspan MPR converter. + +config USB_SERIAL_KEYSPAN_USA28 + bool "USB Keyspan USA-28 Firmware" + depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + help + Say Y here to include firmware for the USA-28 converter. + +config USB_SERIAL_KEYSPAN_USA28X + bool "USB Keyspan USA-28X Firmware" + depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + help + Say Y here to include firmware for the USA-28X converter. + Be sure you have a USA-28X, there are also 28XA and 28XB + models, the label underneath has the actual part number. + +config USB_SERIAL_KEYSPAN_USA28XA + bool "USB Keyspan USA-28XA Firmware" + depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + help + Say Y here to include firmware for the USA-28XA converter. + Be sure you have a USA-28XA, there are also 28X and 28XB + models, the label underneath has the actual part number. + +config USB_SERIAL_KEYSPAN_USA28XB + bool "USB Keyspan USA-28XB Firmware" + depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + help + Say Y here to include firmware for the USA-28XB converter. + Be sure you have a USA-28XB, there are also 28X and 28XA + models, the label underneath has the actual part number. + +config USB_SERIAL_KEYSPAN_USA19 + bool "USB Keyspan USA-19 Firmware" + depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + help + Say Y here to include firmware for the USA-19 converter. + +config USB_SERIAL_KEYSPAN_USA18X + bool "USB Keyspan USA-18X Firmware" + depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + help + Say Y here to include firmware for the USA-18X converter. + +config USB_SERIAL_KEYSPAN_USA19W + bool "USB Keyspan USA-19W Firmware" + depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + help + Say Y here to include firmware for the USA-19W converter. + +config USB_SERIAL_KEYSPAN_USA19QW + bool "USB Keyspan USA-19QW Firmware" + depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + help + Say Y here to include firmware for the USA-19QW converter. + +config USB_SERIAL_KEYSPAN_USA19QI + bool "USB Keyspan USA-19QI Firmware" + depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + help + Say Y here to include firmware for the USA-19QI converter. + +config USB_SERIAL_KEYSPAN_USA49W + bool "USB Keyspan USA-49W Firmware" + depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + help + Say Y here to include firmware for the USA-49W converter. + +config USB_SERIAL_KEYSPAN_USA49WLC + bool "USB Keyspan USA-49WLC Firmware" + depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL + help + Say Y here to include firmware for the USA-49WLC converter. + +config USB_SERIAL_KLSI + tristate "USB KL5KUSB105 (Palmconnect) Driver" + ---help--- + Say Y here if you want to use a KL5KUSB105 - based single port + serial adapter. The most widely known -- and currently the only + tested -- device in this category is the PalmConnect USB Serial + adapter sold by Palm Inc. for use with their Palm III and Palm V + series PDAs. + + Please read <file:Documentation/usb/usb-serial.txt> for more + information. + + To compile this driver as a module, choose M here: the + module will be called kl5kusb105. + +config USB_SERIAL_KOBIL_SCT + tristate "USB KOBIL chipcard reader" + ---help--- + Say Y here if you want to use one of the following KOBIL USB chipcard + readers: + + - USB TWIN + - KAAN Standard Plus + - KAAN SIM + - SecOVID Reader Plus + - B1 Professional + - KAAN Professional + + Note that you need a current CT-API. + To compile this driver as a module, choose M here: the + module will be called kobil_sct. + +config USB_SERIAL_MCT_U232 + tristate "USB MCT Single Port Serial Driver" + ---help--- + Say Y here if you want to use a USB Serial single port adapter from + Magic Control Technology Corp. (U232 is one of the model numbers). + + This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB + BAY, Belkin F5U109, and Belkin F5U409 devices. + + To compile this driver as a module, choose M here: the + module will be called mct_u232. + +config USB_SERIAL_METRO + tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver" + ---help--- + Say Y here if you want to use a USB POS Metrologic barcode scanner. + + To compile this driver as a module, choose M here: the + module will be called metro-usb. + +config USB_SERIAL_MOS7720 + tristate "USB Moschip 7720 Serial Driver" + ---help--- + Say Y here if you want to use USB Serial single and double + port adapters from Moschip Semiconductor Tech. + + To compile this driver as a module, choose M here: the + module will be called mos7720. + +config USB_SERIAL_MOS7715_PARPORT + bool "Support for parallel port on the Moschip 7715" + depends on USB_SERIAL_MOS7720 + depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720 + select PARPORT_NOT_PC + ---help--- + Say Y if you have a Moschip 7715 device and would like to use + the parallel port it provides. The port will register with + the parport subsystem as a low-level driver. + +config USB_SERIAL_MOS7840 + tristate "USB Moschip 7840/7820 USB Serial Driver" + ---help--- + Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820 + Dual-Serial port device from MosChip Semiconductor. + + The MCS7840 and MCS7820 have been developed to connect a wide range + of standard serial devices to a USB host. The MCS7840 has a USB + device controller connected to four (4) individual UARTs while the + MCS7820 controller connects to two (2) individual UARTs. + + To compile this driver as a module, choose M here: the + module will be called mos7840. If unsure, choose N. + +config USB_SERIAL_MXUPORT + tristate "USB Moxa UPORT Serial Driver" + ---help--- + Say Y here if you want to use a MOXA UPort Serial hub. + + This driver supports: + + [2 Port] + - UPort 1250 : 2 Port RS-232/422/485 USB to Serial Hub + - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with + Isolation + + [4 Port] + - UPort 1410 : 4 Port RS-232 USB to Serial Hub + - UPort 1450 : 4 Port RS-232/422/485 USB to Serial Hub + - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with + Isolation + + [8 Port] + - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub + - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub + + [16 Port] + - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub + - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub + + To compile this driver as a module, choose M here: the + module will be called mxuport. + +config USB_SERIAL_NAVMAN + tristate "USB Navman GPS device" + help + To compile this driver as a module, choose M here: the + module will be called navman. + +config USB_SERIAL_PL2303 + tristate "USB Prolific 2303 Single Port Serial Driver" + help + Say Y here if you want to use the PL2303 USB Serial single port + adapter from Prolific. + + To compile this driver as a module, choose M here: the + module will be called pl2303. + +config USB_SERIAL_OTI6858 + tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller" + help + Say Y here if you want to use the OTi-6858 single port USB to serial + converter device. + + To compile this driver as a module, choose M here: the + module will be called oti6858. + +config USB_SERIAL_QCAUX + tristate "USB Qualcomm Auxiliary Serial Port Driver" + help + Say Y here if you want to use the auxiliary serial ports provided + by many modems based on Qualcomm chipsets. These ports often use + a proprietary protocol called DM and cannot be used for AT- or + PPP-based communication. + + To compile this driver as a module, choose M here: the + module will be called qcaux. If unsure, choose N. + +config USB_SERIAL_QUALCOMM + tristate "USB Qualcomm Serial modem" + select USB_SERIAL_WWAN + help + Say Y here if you have a Qualcomm USB modem device. These are + usually wireless cellular modems. + + To compile this driver as a module, choose M here: the + module will be called qcserial. + +config USB_SERIAL_SPCP8X5 + tristate "USB SPCP8x5 USB To Serial Driver" + help + Say Y here if you want to use the spcp8x5 converter chip. This is + commonly found in some Z-Wave USB devices. + + To compile this driver as a module, choose M here: the + module will be called spcp8x5. + +config USB_SERIAL_SAFE + tristate "USB Safe Serial (Encapsulated) Driver" + +config USB_SERIAL_SAFE_PADDED + bool "USB Secure Encapsulated Driver - Padded" + depends on USB_SERIAL_SAFE + +config USB_SERIAL_SIERRAWIRELESS + tristate "USB Sierra Wireless Driver" + help + Say M here if you want to use Sierra Wireless devices. + + Many devices have a feature known as TRU-Install. For those devices + to work properly, the USB Storage Sierra feature must be enabled. + + To compile this driver as a module, choose M here: the + module will be called sierra. + +config USB_SERIAL_SYMBOL + tristate "USB Symbol Barcode driver (serial mode)" + help + Say Y here if you want to use a Symbol USB Barcode device + in serial emulation mode. + + To compile this driver as a module, choose M here: the + module will be called symbolserial. + +config USB_SERIAL_TI + tristate "USB TI 3410/5052 Serial Driver" + help + Say Y here if you want to use the TI USB 3410 or 5052 + serial devices. + + To compile this driver as a module, choose M here: the + module will be called ti_usb_3410_5052. + +config USB_SERIAL_CYBERJACK + tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader" + ---help--- + Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard + reader. This is an interface to ISO 7816 compatible contact-based + chipcards, e.g. GSM SIMs. + + To compile this driver as a module, choose M here: the + module will be called cyberjack. + + If unsure, say N. + +config USB_SERIAL_XIRCOM + tristate "USB Xircom / Entrega Single Port Serial Driver" + select USB_EZUSB_FX2 + help + Say Y here if you want to use a Xircom or Entrega single port USB to + serial converter device. This driver makes use of firmware + developed from scratch by Brian Warner. + + To compile this driver as a module, choose M here: the + module will be called keyspan_pda. + +config USB_SERIAL_WWAN + tristate + +config USB_SERIAL_OPTION + tristate "USB driver for GSM and CDMA modems" + select USB_SERIAL_WWAN + help + Say Y here if you have a GSM or CDMA modem that's connected to USB. + + This driver also supports several PCMCIA cards which have a + built-in OHCI-USB adapter and an internally-connected GSM modem. + The USB bus on these cards is not accessible externally. + + Supported devices include (some of?) those made by: + Option, Huawei, Audiovox, Novatel Wireless, or Anydata. + + To compile this driver as a module, choose M here: the + module will be called option. + + If this driver doesn't recognize your device, + it might be accessible via the FTDI_SIO driver. + +config USB_SERIAL_OMNINET + tristate "USB ZyXEL omni.net LCD Plus Driver" + help + Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA. + + To compile this driver as a module, choose M here: the + module will be called omninet. + +config USB_SERIAL_OPTICON + tristate "USB Opticon Barcode driver (serial mode)" + help + Say Y here if you want to use a Opticon USB Barcode device + in serial emulation mode. + + To compile this driver as a module, choose M here: the + module will be called opticon. + +config USB_SERIAL_XSENS_MT + tristate "Xsens motion tracker serial interface driver" + help + Say Y here if you want to use Xsens motion trackers. + + This driver supports the new generation of motion trackers + by Xsens. Older devices can be accessed using the FTDI_SIO + driver. + + To compile this driver as a module, choose M here: the + module will be called xsens_mt. + +config USB_SERIAL_WISHBONE + tristate "USB-Wishbone adapter interface driver" + help + Say Y here if you want to use a USB attached Wishbone bus. + + Wishbone is an open hardware SoC bus commonly used in FPGA + designs. Bus access can be serialized using the Etherbone + protocol <http://www.ohwr.org/projects/etherbone-core>. + + This driver is intended to be used with devices which attach + their internal Wishbone bus to a USB serial interface using + the Etherbone protocol. A userspace library is required to + speak the protocol made available by this driver as ttyUSBx. + + To compile this driver as a module, choose M here: the + module will be called wishbone-serial. + +config USB_SERIAL_SSU100 + tristate "USB Quatech SSU-100 Single Port Serial Driver" + help + Say Y here if you want to use the Quatech SSU-100 single + port usb to serial adapter. + + To compile this driver as a module, choose M here: the + module will be called ssu100. + +config USB_SERIAL_QT2 + tristate "USB Quatech Serial Driver for USB 2 devices" + help + Say Y here if you want to use the Quatech USB 2 + serial adapters. + + To compile this driver as a module, choose M here: the + module will be called quatech-serial. + +config USB_SERIAL_DEBUG + tristate "USB Debugging Device" + help + Say Y here if you have a USB debugging device used to receive + debugging data from another machine. The most common of these + devices is the NetChip TurboCONNECT device. + + To compile this driver as a module, choose M here: the + module will be called usb-debug. + +endif # USB_SERIAL diff --git a/kernel/drivers/usb/serial/Makefile b/kernel/drivers/usb/serial/Makefile new file mode 100644 index 000000000..349d9df08 --- /dev/null +++ b/kernel/drivers/usb/serial/Makefile @@ -0,0 +1,62 @@ +# +# Makefile for the USB serial device drivers. +# + +# Object file lists. + +obj-$(CONFIG_USB_SERIAL) += usbserial.o + +usbserial-y := usb-serial.o generic.o bus.o + +usbserial-$(CONFIG_USB_SERIAL_CONSOLE) += console.o + +obj-$(CONFIG_USB_SERIAL_AIRCABLE) += aircable.o +obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o +obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o +obj-$(CONFIG_USB_SERIAL_CH341) += ch341.o +obj-$(CONFIG_USB_SERIAL_CP210X) += cp210x.o +obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o +obj-$(CONFIG_USB_SERIAL_CYPRESS_M8) += cypress_m8.o +obj-$(CONFIG_USB_SERIAL_DEBUG) += usb_debug.o +obj-$(CONFIG_USB_SERIAL_DIGI_ACCELEPORT) += digi_acceleport.o +obj-$(CONFIG_USB_SERIAL_EDGEPORT) += io_edgeport.o +obj-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += io_ti.o +obj-$(CONFIG_USB_SERIAL_EMPEG) += empeg.o +obj-$(CONFIG_USB_SERIAL_F81232) += f81232.o +obj-$(CONFIG_USB_SERIAL_FTDI_SIO) += ftdi_sio.o +obj-$(CONFIG_USB_SERIAL_GARMIN) += garmin_gps.o +obj-$(CONFIG_USB_SERIAL_IPAQ) += ipaq.o +obj-$(CONFIG_USB_SERIAL_IPW) += ipw.o +obj-$(CONFIG_USB_SERIAL_IR) += ir-usb.o +obj-$(CONFIG_USB_SERIAL_IUU) += iuu_phoenix.o +obj-$(CONFIG_USB_SERIAL_KEYSPAN) += keyspan.o +obj-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda.o +obj-$(CONFIG_USB_SERIAL_KLSI) += kl5kusb105.o +obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o +obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o +obj-$(CONFIG_USB_SERIAL_METRO) += metro-usb.o +obj-$(CONFIG_USB_SERIAL_MOS7720) += mos7720.o +obj-$(CONFIG_USB_SERIAL_MOS7840) += mos7840.o +obj-$(CONFIG_USB_SERIAL_MXUPORT) += mxuport.o +obj-$(CONFIG_USB_SERIAL_NAVMAN) += navman.o +obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o +obj-$(CONFIG_USB_SERIAL_OPTICON) += opticon.o +obj-$(CONFIG_USB_SERIAL_OPTION) += option.o +obj-$(CONFIG_USB_SERIAL_OTI6858) += oti6858.o +obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o +obj-$(CONFIG_USB_SERIAL_QCAUX) += qcaux.o +obj-$(CONFIG_USB_SERIAL_QUALCOMM) += qcserial.o +obj-$(CONFIG_USB_SERIAL_QT2) += quatech2.o +obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o +obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o +obj-$(CONFIG_USB_SERIAL_SIMPLE) += usb-serial-simple.o +obj-$(CONFIG_USB_SERIAL_SPCP8X5) += spcp8x5.o +obj-$(CONFIG_USB_SERIAL_SSU100) += ssu100.o +obj-$(CONFIG_USB_SERIAL_SYMBOL) += symbolserial.o +obj-$(CONFIG_USB_SERIAL_WWAN) += usb_wwan.o +obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o +obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o +obj-$(CONFIG_USB_SERIAL_WISHBONE) += wishbone-serial.o +obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o +obj-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda.o +obj-$(CONFIG_USB_SERIAL_XSENS_MT) += xsens_mt.o diff --git a/kernel/drivers/usb/serial/Makefile-keyspan_pda_fw b/kernel/drivers/usb/serial/Makefile-keyspan_pda_fw new file mode 100644 index 000000000..c20baf728 --- /dev/null +++ b/kernel/drivers/usb/serial/Makefile-keyspan_pda_fw @@ -0,0 +1,16 @@ + +# some rules to handle the quirks of the 'as31' assembler, like +# insisting upon fixed suffixes for the input and output files, +# and its lack of preprocessor support + +all: keyspan_pda_fw.h + +%.asm: %.S + gcc -x assembler-with-cpp -P -E -o $@ $< + +%.hex: %.asm + as31 -l $< + mv $*.obj $@ + +%_fw.h: %.hex ezusb_convert.pl + perl ezusb_convert.pl $* < $< > $@ diff --git a/kernel/drivers/usb/serial/aircable.c b/kernel/drivers/usb/serial/aircable.c new file mode 100644 index 000000000..80a9845cd --- /dev/null +++ b/kernel/drivers/usb/serial/aircable.c @@ -0,0 +1,184 @@ +/* + * AIRcable USB Bluetooth Dongle Driver. + * + * Copyright (C) 2010 Johan Hovold <jhovold@gmail.com> + * Copyright (C) 2006 Manuel Francisco Naranjo (naranjo.manuel@gmail.com) + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + * + * The device works as an standard CDC device, it has 2 interfaces, the first + * one is for firmware access and the second is the serial one. + * The protocol is very simply, there are two possibilities reading or writing. + * When writing the first urb must have a Header that starts with 0x20 0x29 the + * next two bytes must say how much data will be sent. + * When reading the process is almost equal except that the header starts with + * 0x00 0x20. + * + * The device simply need some stuff to understand data coming from the usb + * buffer: The First and Second byte is used for a Header, the Third and Fourth + * tells the device the amount of information the package holds. + * Packages are 60 bytes long Header Stuff. + * When writing to the device the first two bytes of the header are 0x20 0x29 + * When reading the bytes are 0x00 0x20, or 0x00 0x10, there is an strange + * situation, when too much data arrives to the device because it sends the data + * but with out the header. I will use a simply hack to override this situation, + * if there is data coming that does not contain any header, then that is data + * that must go directly to the tty, as there is no documentation about if there + * is any other control code, I will simply check for the first + * one. + * + * The driver registers himself with the USB-serial core and the USB Core. I had + * to implement a probe function against USB-serial, because other way, the + * driver was attaching himself to both interfaces. I have tried with different + * configurations of usb_serial_driver with out exit, only the probe function + * could handle this correctly. + * + * I have taken some info from a Greg Kroah-Hartman article: + * http://www.linuxjournal.com/article/6573 + * And from Linux Device Driver Kit CD, which is a great work, the authors taken + * the work to recompile lots of information an knowledge in drivers development + * and made it all available inside a cd. + * URL: http://kernel.org/pub/linux/kernel/people/gregkh/ddk/ + * + */ + +#include <asm/unaligned.h> +#include <linux/tty.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/tty_flip.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +/* Vendor and Product ID */ +#define AIRCABLE_VID 0x16CA +#define AIRCABLE_USB_PID 0x1502 + +/* Protocol Stuff */ +#define HCI_HEADER_LENGTH 0x4 +#define TX_HEADER_0 0x20 +#define TX_HEADER_1 0x29 +#define RX_HEADER_0 0x00 +#define RX_HEADER_1 0x20 +#define HCI_COMPLETE_FRAME 64 + +/* rx_flags */ +#define THROTTLED 0x01 +#define ACTUALLY_THROTTLED 0x02 + +#define DRIVER_AUTHOR "Naranjo, Manuel Francisco <naranjo.manuel@gmail.com>, Johan Hovold <jhovold@gmail.com>" +#define DRIVER_DESC "AIRcable USB Driver" + +/* ID table that will be registered with USB core */ +static const struct usb_device_id id_table[] = { + { USB_DEVICE(AIRCABLE_VID, AIRCABLE_USB_PID) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static int aircable_prepare_write_buffer(struct usb_serial_port *port, + void *dest, size_t size) +{ + int count; + unsigned char *buf = dest; + + count = kfifo_out_locked(&port->write_fifo, buf + HCI_HEADER_LENGTH, + size - HCI_HEADER_LENGTH, &port->lock); + buf[0] = TX_HEADER_0; + buf[1] = TX_HEADER_1; + put_unaligned_le16(count, &buf[2]); + + return count + HCI_HEADER_LENGTH; +} + +static int aircable_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + struct usb_host_interface *iface_desc = serial->interface-> + cur_altsetting; + struct usb_endpoint_descriptor *endpoint; + int num_bulk_out = 0; + int i; + + for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { + endpoint = &iface_desc->endpoint[i].desc; + if (usb_endpoint_is_bulk_out(endpoint)) { + dev_dbg(&serial->dev->dev, + "found bulk out on endpoint %d\n", i); + ++num_bulk_out; + } + } + + if (num_bulk_out == 0) { + dev_dbg(&serial->dev->dev, "Invalid interface, discarding\n"); + return -ENODEV; + } + + return 0; +} + +static int aircable_process_packet(struct usb_serial_port *port, + int has_headers, char *packet, int len) +{ + if (has_headers) { + len -= HCI_HEADER_LENGTH; + packet += HCI_HEADER_LENGTH; + } + if (len <= 0) { + dev_dbg(&port->dev, "%s - malformed packet\n", __func__); + return 0; + } + + tty_insert_flip_string(&port->port, packet, len); + + return len; +} + +static void aircable_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + char *data = (char *)urb->transfer_buffer; + int has_headers; + int count; + int len; + int i; + + has_headers = (urb->actual_length > 2 && data[0] == RX_HEADER_0); + + count = 0; + for (i = 0; i < urb->actual_length; i += HCI_COMPLETE_FRAME) { + len = min_t(int, urb->actual_length - i, HCI_COMPLETE_FRAME); + count += aircable_process_packet(port, has_headers, + &data[i], len); + } + + if (count) + tty_flip_buffer_push(&port->port); +} + +static struct usb_serial_driver aircable_device = { + .driver = { + .owner = THIS_MODULE, + .name = "aircable", + }, + .id_table = id_table, + .num_ports = 1, + .bulk_out_size = HCI_COMPLETE_FRAME, + .probe = aircable_probe, + .process_read_urb = aircable_process_read_urb, + .prepare_write_buffer = aircable_prepare_write_buffer, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &aircable_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/ark3116.c b/kernel/drivers/usb/serial/ark3116.c new file mode 100644 index 000000000..1532cde8a --- /dev/null +++ b/kernel/drivers/usb/serial/ark3116.c @@ -0,0 +1,791 @@ +/* + * Copyright (C) 2009 by Bart Hartgers (bart.hartgers+ark3116@gmail.com) + * Original version: + * Copyright (C) 2006 + * Simon Schulz (ark3116_driver <at> auctionant.de) + * + * ark3116 + * - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547, + * productid=0x0232) (used in a datacable called KQ-U8A) + * + * Supports full modem status lines, break, hardware flow control. Does not + * support software flow control, since I do not know how to enable it in hw. + * + * This driver is a essentially new implementation. I initially dug + * into the old ark3116.c driver and suddenly realized the ark3116 is + * a 16450 with a USB interface glued to it. See comments at the + * bottom of this file. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/ioctl.h> +#include <linux/tty.h> +#include <linux/slab.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/serial.h> +#include <linux/serial_reg.h> +#include <linux/uaccess.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> + +#define DRIVER_AUTHOR "Bart Hartgers <bart.hartgers+ark3116@gmail.com>" +#define DRIVER_DESC "USB ARK3116 serial/IrDA driver" +#define DRIVER_DEV_DESC "ARK3116 RS232/IrDA" +#define DRIVER_NAME "ark3116" + +/* usb timeout of 1 second */ +#define ARK_TIMEOUT 1000 + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(0x6547, 0x0232) }, + { USB_DEVICE(0x18ec, 0x3118) }, /* USB to IrDA adapter */ + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static int is_irda(struct usb_serial *serial) +{ + struct usb_device *dev = serial->dev; + if (le16_to_cpu(dev->descriptor.idVendor) == 0x18ec && + le16_to_cpu(dev->descriptor.idProduct) == 0x3118) + return 1; + return 0; +} + +struct ark3116_private { + int irda; /* 1 for irda device */ + + /* protects hw register updates */ + struct mutex hw_lock; + + int quot; /* baudrate divisor */ + __u32 lcr; /* line control register value */ + __u32 hcr; /* handshake control register (0x8) + * value */ + __u32 mcr; /* modem control register value */ + + /* protects the status values below */ + spinlock_t status_lock; + __u32 msr; /* modem status register value */ + __u32 lsr; /* line status register value */ +}; + +static int ark3116_write_reg(struct usb_serial *serial, + unsigned reg, __u8 val) +{ + int result; + /* 0xfe 0x40 are magic values taken from original driver */ + result = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), + 0xfe, 0x40, val, reg, + NULL, 0, ARK_TIMEOUT); + return result; +} + +static int ark3116_read_reg(struct usb_serial *serial, + unsigned reg, unsigned char *buf) +{ + int result; + /* 0xfe 0xc0 are magic values taken from original driver */ + result = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + 0xfe, 0xc0, 0, reg, + buf, 1, ARK_TIMEOUT); + if (result < 0) + return result; + else + return buf[0]; +} + +static inline int calc_divisor(int bps) +{ + /* Original ark3116 made some exceptions in rounding here + * because windows did the same. Assume that is not really + * necessary. + * Crystal is 12MHz, probably because of USB, but we divide by 4? + */ + return (12000000 + 2*bps) / (4*bps); +} + +static int ark3116_attach(struct usb_serial *serial) +{ + /* make sure we have our end-points */ + if ((serial->num_bulk_in == 0) || + (serial->num_bulk_out == 0) || + (serial->num_interrupt_in == 0)) { + dev_err(&serial->dev->dev, + "%s - missing endpoint - " + "bulk in: %d, bulk out: %d, int in %d\n", + KBUILD_MODNAME, + serial->num_bulk_in, + serial->num_bulk_out, + serial->num_interrupt_in); + return -EINVAL; + } + + return 0; +} + +static int ark3116_port_probe(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct ark3116_private *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mutex_init(&priv->hw_lock); + spin_lock_init(&priv->status_lock); + + priv->irda = is_irda(serial); + + usb_set_serial_port_data(port, priv); + + /* setup the hardware */ + ark3116_write_reg(serial, UART_IER, 0); + /* disable DMA */ + ark3116_write_reg(serial, UART_FCR, 0); + /* handshake control */ + priv->hcr = 0; + ark3116_write_reg(serial, 0x8 , 0); + /* modem control */ + priv->mcr = 0; + ark3116_write_reg(serial, UART_MCR, 0); + + if (!(priv->irda)) { + ark3116_write_reg(serial, 0xb , 0); + } else { + ark3116_write_reg(serial, 0xb , 1); + ark3116_write_reg(serial, 0xc , 0); + ark3116_write_reg(serial, 0xd , 0x41); + ark3116_write_reg(serial, 0xa , 1); + } + + /* setup baudrate */ + ark3116_write_reg(serial, UART_LCR, UART_LCR_DLAB); + + /* setup for 9600 8N1 */ + priv->quot = calc_divisor(9600); + ark3116_write_reg(serial, UART_DLL, priv->quot & 0xff); + ark3116_write_reg(serial, UART_DLM, (priv->quot>>8) & 0xff); + + priv->lcr = UART_LCR_WLEN8; + ark3116_write_reg(serial, UART_LCR, UART_LCR_WLEN8); + + ark3116_write_reg(serial, 0xe, 0); + + if (priv->irda) + ark3116_write_reg(serial, 0x9, 0); + + dev_info(&serial->dev->dev, + "%s using %s mode\n", + KBUILD_MODNAME, + priv->irda ? "IrDA" : "RS232"); + return 0; +} + +static int ark3116_port_remove(struct usb_serial_port *port) +{ + struct ark3116_private *priv = usb_get_serial_port_data(port); + + /* device is closed, so URBs and DMA should be down */ + mutex_destroy(&priv->hw_lock); + kfree(priv); + + return 0; +} + +static void ark3116_init_termios(struct tty_struct *tty) +{ + struct ktermios *termios = &tty->termios; + *termios = tty_std_termios; + termios->c_cflag = B9600 | CS8 + | CREAD | HUPCL | CLOCAL; + termios->c_ispeed = 9600; + termios->c_ospeed = 9600; +} + +static void ark3116_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old_termios) +{ + struct usb_serial *serial = port->serial; + struct ark3116_private *priv = usb_get_serial_port_data(port); + struct ktermios *termios = &tty->termios; + unsigned int cflag = termios->c_cflag; + int bps = tty_get_baud_rate(tty); + int quot; + __u8 lcr, hcr, eval; + + /* set data bit count */ + switch (cflag & CSIZE) { + case CS5: + lcr = UART_LCR_WLEN5; + break; + case CS6: + lcr = UART_LCR_WLEN6; + break; + case CS7: + lcr = UART_LCR_WLEN7; + break; + default: + case CS8: + lcr = UART_LCR_WLEN8; + break; + } + if (cflag & CSTOPB) + lcr |= UART_LCR_STOP; + if (cflag & PARENB) + lcr |= UART_LCR_PARITY; + if (!(cflag & PARODD)) + lcr |= UART_LCR_EPAR; +#ifdef CMSPAR + if (cflag & CMSPAR) + lcr |= UART_LCR_SPAR; +#endif + /* handshake control */ + hcr = (cflag & CRTSCTS) ? 0x03 : 0x00; + + /* calc baudrate */ + dev_dbg(&port->dev, "%s - setting bps to %d\n", __func__, bps); + eval = 0; + switch (bps) { + case 0: + quot = calc_divisor(9600); + break; + default: + if ((bps < 75) || (bps > 3000000)) + bps = 9600; + quot = calc_divisor(bps); + break; + case 460800: + eval = 1; + quot = calc_divisor(bps); + break; + case 921600: + eval = 2; + quot = calc_divisor(bps); + break; + } + + /* Update state: synchronize */ + mutex_lock(&priv->hw_lock); + + /* keep old LCR_SBC bit */ + lcr |= (priv->lcr & UART_LCR_SBC); + + dev_dbg(&port->dev, "%s - setting hcr:0x%02x,lcr:0x%02x,quot:%d\n", + __func__, hcr, lcr, quot); + + /* handshake control */ + if (priv->hcr != hcr) { + priv->hcr = hcr; + ark3116_write_reg(serial, 0x8, hcr); + } + + /* baudrate */ + if (priv->quot != quot) { + priv->quot = quot; + priv->lcr = lcr; /* need to write lcr anyway */ + + /* disable DMA since transmit/receive is + * shadowed by UART_DLL + */ + ark3116_write_reg(serial, UART_FCR, 0); + + ark3116_write_reg(serial, UART_LCR, + lcr|UART_LCR_DLAB); + ark3116_write_reg(serial, UART_DLL, quot & 0xff); + ark3116_write_reg(serial, UART_DLM, (quot>>8) & 0xff); + + /* restore lcr */ + ark3116_write_reg(serial, UART_LCR, lcr); + /* magic baudrate thingy: not sure what it does, + * but windows does this as well. + */ + ark3116_write_reg(serial, 0xe, eval); + + /* enable DMA */ + ark3116_write_reg(serial, UART_FCR, UART_FCR_DMA_SELECT); + } else if (priv->lcr != lcr) { + priv->lcr = lcr; + ark3116_write_reg(serial, UART_LCR, lcr); + } + + mutex_unlock(&priv->hw_lock); + + /* check for software flow control */ + if (I_IXOFF(tty) || I_IXON(tty)) { + dev_warn(&serial->dev->dev, + "%s: don't know how to do software flow control\n", + KBUILD_MODNAME); + } + + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, bps, bps); +} + +static void ark3116_close(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + + /* disable DMA */ + ark3116_write_reg(serial, UART_FCR, 0); + + /* deactivate interrupts */ + ark3116_write_reg(serial, UART_IER, 0); + + usb_serial_generic_close(port); + if (serial->num_interrupt_in) + usb_kill_urb(port->interrupt_in_urb); +} + +static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct ark3116_private *priv = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + unsigned char *buf; + int result; + + buf = kmalloc(1, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + result = usb_serial_generic_open(tty, port); + if (result) { + dev_dbg(&port->dev, + "%s - usb_serial_generic_open failed: %d\n", + __func__, result); + goto err_out; + } + + /* remove any data still left: also clears error state */ + ark3116_read_reg(serial, UART_RX, buf); + + /* read modem status */ + priv->msr = ark3116_read_reg(serial, UART_MSR, buf); + /* read line status */ + priv->lsr = ark3116_read_reg(serial, UART_LSR, buf); + + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result) { + dev_err(&port->dev, "submit irq_in urb failed %d\n", + result); + ark3116_close(port); + goto err_out; + } + + /* activate interrupts */ + ark3116_write_reg(port->serial, UART_IER, UART_IER_MSI|UART_IER_RLSI); + + /* enable DMA */ + ark3116_write_reg(port->serial, UART_FCR, UART_FCR_DMA_SELECT); + + /* setup termios */ + if (tty) + ark3116_set_termios(tty, port, NULL); + +err_out: + kfree(buf); + return result; +} + +static int ark3116_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + struct serial_struct serstruct; + void __user *user_arg = (void __user *)arg; + + switch (cmd) { + case TIOCGSERIAL: + /* XXX: Some of these values are probably wrong. */ + memset(&serstruct, 0, sizeof(serstruct)); + serstruct.type = PORT_16654; + serstruct.line = port->minor; + serstruct.port = port->port_number; + serstruct.custom_divisor = 0; + serstruct.baud_base = 460800; + + if (copy_to_user(user_arg, &serstruct, sizeof(serstruct))) + return -EFAULT; + + return 0; + case TIOCSSERIAL: + if (copy_from_user(&serstruct, user_arg, sizeof(serstruct))) + return -EFAULT; + return 0; + } + + return -ENOIOCTLCMD; +} + +static int ark3116_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct ark3116_private *priv = usb_get_serial_port_data(port); + __u32 status; + __u32 ctrl; + unsigned long flags; + + mutex_lock(&priv->hw_lock); + ctrl = priv->mcr; + mutex_unlock(&priv->hw_lock); + + spin_lock_irqsave(&priv->status_lock, flags); + status = priv->msr; + spin_unlock_irqrestore(&priv->status_lock, flags); + + return (status & UART_MSR_DSR ? TIOCM_DSR : 0) | + (status & UART_MSR_CTS ? TIOCM_CTS : 0) | + (status & UART_MSR_RI ? TIOCM_RI : 0) | + (status & UART_MSR_DCD ? TIOCM_CD : 0) | + (ctrl & UART_MCR_DTR ? TIOCM_DTR : 0) | + (ctrl & UART_MCR_RTS ? TIOCM_RTS : 0) | + (ctrl & UART_MCR_OUT1 ? TIOCM_OUT1 : 0) | + (ctrl & UART_MCR_OUT2 ? TIOCM_OUT2 : 0); +} + +static int ark3116_tiocmset(struct tty_struct *tty, + unsigned set, unsigned clr) +{ + struct usb_serial_port *port = tty->driver_data; + struct ark3116_private *priv = usb_get_serial_port_data(port); + + /* we need to take the mutex here, to make sure that the value + * in priv->mcr is actually the one that is in the hardware + */ + + mutex_lock(&priv->hw_lock); + + if (set & TIOCM_RTS) + priv->mcr |= UART_MCR_RTS; + if (set & TIOCM_DTR) + priv->mcr |= UART_MCR_DTR; + if (set & TIOCM_OUT1) + priv->mcr |= UART_MCR_OUT1; + if (set & TIOCM_OUT2) + priv->mcr |= UART_MCR_OUT2; + if (clr & TIOCM_RTS) + priv->mcr &= ~UART_MCR_RTS; + if (clr & TIOCM_DTR) + priv->mcr &= ~UART_MCR_DTR; + if (clr & TIOCM_OUT1) + priv->mcr &= ~UART_MCR_OUT1; + if (clr & TIOCM_OUT2) + priv->mcr &= ~UART_MCR_OUT2; + + ark3116_write_reg(port->serial, UART_MCR, priv->mcr); + + mutex_unlock(&priv->hw_lock); + + return 0; +} + +static void ark3116_break_ctl(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + struct ark3116_private *priv = usb_get_serial_port_data(port); + + /* LCR is also used for other things: protect access */ + mutex_lock(&priv->hw_lock); + + if (break_state) + priv->lcr |= UART_LCR_SBC; + else + priv->lcr &= ~UART_LCR_SBC; + + ark3116_write_reg(port->serial, UART_LCR, priv->lcr); + + mutex_unlock(&priv->hw_lock); +} + +static void ark3116_update_msr(struct usb_serial_port *port, __u8 msr) +{ + struct ark3116_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->status_lock, flags); + priv->msr = msr; + spin_unlock_irqrestore(&priv->status_lock, flags); + + if (msr & UART_MSR_ANY_DELTA) { + /* update input line counters */ + if (msr & UART_MSR_DCTS) + port->icount.cts++; + if (msr & UART_MSR_DDSR) + port->icount.dsr++; + if (msr & UART_MSR_DDCD) + port->icount.dcd++; + if (msr & UART_MSR_TERI) + port->icount.rng++; + wake_up_interruptible(&port->port.delta_msr_wait); + } +} + +static void ark3116_update_lsr(struct usb_serial_port *port, __u8 lsr) +{ + struct ark3116_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->status_lock, flags); + /* combine bits */ + priv->lsr |= lsr; + spin_unlock_irqrestore(&priv->status_lock, flags); + + if (lsr&UART_LSR_BRK_ERROR_BITS) { + if (lsr & UART_LSR_BI) + port->icount.brk++; + if (lsr & UART_LSR_FE) + port->icount.frame++; + if (lsr & UART_LSR_PE) + port->icount.parity++; + if (lsr & UART_LSR_OE) + port->icount.overrun++; + } +} + +static void ark3116_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + int status = urb->status; + const __u8 *data = urb->transfer_buffer; + int result; + + switch (status) { + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", + __func__, status); + break; + case 0: /* success */ + /* discovered this by trail and error... */ + if ((urb->actual_length == 4) && (data[0] == 0xe8)) { + const __u8 id = data[1]&UART_IIR_ID; + dev_dbg(&port->dev, "%s: iir=%02x\n", __func__, data[1]); + if (id == UART_IIR_MSI) { + dev_dbg(&port->dev, "%s: msr=%02x\n", + __func__, data[3]); + ark3116_update_msr(port, data[3]); + break; + } else if (id == UART_IIR_RLSI) { + dev_dbg(&port->dev, "%s: lsr=%02x\n", + __func__, data[2]); + ark3116_update_lsr(port, data[2]); + break; + } + } + /* + * Not sure what this data meant... + */ + usb_serial_debug_data(&port->dev, __func__, + urb->actual_length, + urb->transfer_buffer); + break; + } + + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) + dev_err(&urb->dev->dev, + "%s - Error %d submitting interrupt urb\n", + __func__, result); +} + + +/* Data comes in via the bulk (data) URB, errors/interrupts via the int URB. + * This means that we cannot be sure which data byte has an associated error + * condition, so we report an error for all data in the next bulk read. + * + * Actually, there might even be a window between the bulk data leaving the + * ark and reading/resetting the lsr in the read_bulk_callback where an + * interrupt for the next data block could come in. + * Without somekind of ordering on the ark, we would have to report the + * error for the next block of data as well... + * For now, let's pretend this can't happen. + */ +static void ark3116_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct ark3116_private *priv = usb_get_serial_port_data(port); + unsigned char *data = urb->transfer_buffer; + char tty_flag = TTY_NORMAL; + unsigned long flags; + __u32 lsr; + + /* update line status */ + spin_lock_irqsave(&priv->status_lock, flags); + lsr = priv->lsr; + priv->lsr &= ~UART_LSR_BRK_ERROR_BITS; + spin_unlock_irqrestore(&priv->status_lock, flags); + + if (!urb->actual_length) + return; + + if (lsr & UART_LSR_BRK_ERROR_BITS) { + if (lsr & UART_LSR_BI) + tty_flag = TTY_BREAK; + else if (lsr & UART_LSR_PE) + tty_flag = TTY_PARITY; + else if (lsr & UART_LSR_FE) + tty_flag = TTY_FRAME; + + /* overrun is special, not associated with a char */ + if (lsr & UART_LSR_OE) + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); + } + tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag, + urb->actual_length); + tty_flip_buffer_push(&port->port); +} + +static struct usb_serial_driver ark3116_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ark3116", + }, + .id_table = id_table, + .num_ports = 1, + .attach = ark3116_attach, + .port_probe = ark3116_port_probe, + .port_remove = ark3116_port_remove, + .set_termios = ark3116_set_termios, + .init_termios = ark3116_init_termios, + .ioctl = ark3116_ioctl, + .tiocmget = ark3116_tiocmget, + .tiocmset = ark3116_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, + .open = ark3116_open, + .close = ark3116_close, + .break_ctl = ark3116_break_ctl, + .read_int_callback = ark3116_read_int_callback, + .process_read_urb = ark3116_process_read_urb, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &ark3116_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_LICENSE("GPL"); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); + +/* + * The following describes what I learned from studying the old + * ark3116.c driver, disassembling the windows driver, and some lucky + * guesses. Since I do not have any datasheet or other + * documentation, inaccuracies are almost guaranteed. + * + * Some specs for the ARK3116 can be found here: + * http://web.archive.org/web/20060318000438/ + * www.arkmicro.com/en/products/view.php?id=10 + * On that page, 2 GPIO pins are mentioned: I assume these are the + * OUT1 and OUT2 pins of the UART, so I added support for those + * through the MCR. Since the pins are not available on my hardware, + * I could not verify this. + * Also, it states there is "on-chip hardware flow control". I have + * discovered how to enable that. Unfortunately, I do not know how to + * enable XON/XOFF (software) flow control, which would need support + * from the chip as well to work. Because of the wording on the web + * page there is a real possibility the chip simply does not support + * software flow control. + * + * I got my ark3116 as part of a mobile phone adapter cable. On the + * PCB, the following numbered contacts are present: + * + * 1:- +5V + * 2:o DTR + * 3:i RX + * 4:i DCD + * 5:o RTS + * 6:o TX + * 7:i RI + * 8:i DSR + * 10:- 0V + * 11:i CTS + * + * On my chip, all signals seem to be 3.3V, but 5V tolerant. But that + * may be different for the one you have ;-). + * + * The windows driver limits the registers to 0-F, so I assume there + * are actually 16 present on the device. + * + * On an UART interrupt, 4 bytes of data come in on the interrupt + * endpoint. The bytes are 0xe8 IIR LSR MSR. + * + * The baudrate seems to be generated from the 12MHz crystal, using + * 4-times subsampling. So quot=12e6/(4*baud). Also see description + * of register E. + * + * Registers 0-7: + * These seem to be the same as for a regular 16450. The FCR is set + * to UART_FCR_DMA_SELECT (0x8), I guess to enable transfers between + * the UART and the USB bridge/DMA engine. + * + * Register 8: + * By trial and error, I found out that bit 0 enables hardware CTS, + * stopping TX when CTS is +5V. Bit 1 does the same for RTS, making + * RTS +5V when the 3116 cannot transfer the data to the USB bus + * (verified by disabling the reading URB). Note that as far as I can + * tell, the windows driver does NOT use this, so there might be some + * hardware bug or something. + * + * According to a patch provided here + * (http://lkml.org/lkml/2009/7/26/56), the ARK3116 can also be used + * as an IrDA dongle. Since I do not have such a thing, I could not + * investigate that aspect. However, I can speculate ;-). + * + * - IrDA encodes data differently than RS232. Most likely, one of + * the bits in registers 9..E enables the IR ENDEC (encoder/decoder). + * - Depending on the IR transceiver, the input and output need to be + * inverted, so there are probably bits for that as well. + * - IrDA is half-duplex, so there should be a bit for selecting that. + * + * This still leaves at least two registers unaccounted for. Perhaps + * The chip can do XON/XOFF or CRC in HW? + * + * Register 9: + * Set to 0x00 for IrDA, when the baudrate is initialised. + * + * Register A: + * Set to 0x01 for IrDA, at init. + * + * Register B: + * Set to 0x01 for IrDA, 0x00 for RS232, at init. + * + * Register C: + * Set to 00 for IrDA, at init. + * + * Register D: + * Set to 0x41 for IrDA, at init. + * + * Register E: + * Somekind of baudrate override. The windows driver seems to set + * this to 0x00 for normal baudrates, 0x01 for 460800, 0x02 for 921600. + * Since 460800 and 921600 cannot be obtained by dividing 3MHz by an integer, + * it could be somekind of subdivisor thingy. + * However,it does not seem to do anything: selecting 921600 (divisor 3, + * reg E=2), still gets 1 MHz. I also checked if registers 9, C or F would + * work, but they don't. + * + * Register F: unknown + */ diff --git a/kernel/drivers/usb/serial/belkin_sa.c b/kernel/drivers/usb/serial/belkin_sa.c new file mode 100644 index 000000000..15bc71853 --- /dev/null +++ b/kernel/drivers/usb/serial/belkin_sa.c @@ -0,0 +1,501 @@ +/* + * Belkin USB Serial Adapter Driver + * + * Copyright (C) 2000 William Greathouse (wgreathouse@smva.com) + * Copyright (C) 2000-2001 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2010 Johan Hovold (jhovold@gmail.com) + * + * This program is largely derived from work by the linux-usb group + * and associated source files. Please see the usb/serial files for + * individual credits and copyrights. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * See Documentation/usb/usb-serial.txt for more information on using this + * driver + * + * TODO: + * -- Add true modem control line query capability. Currently we track the + * states reported by the interrupt and the states we request. + * -- Add support for flush commands + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include "belkin_sa.h" + +#define DRIVER_AUTHOR "William Greathouse <wgreathouse@smva.com>" +#define DRIVER_DESC "USB Belkin Serial converter driver" + +/* function prototypes for a Belkin USB Serial Adapter F5U103 */ +static int belkin_sa_port_probe(struct usb_serial_port *port); +static int belkin_sa_port_remove(struct usb_serial_port *port); +static int belkin_sa_open(struct tty_struct *tty, + struct usb_serial_port *port); +static void belkin_sa_close(struct usb_serial_port *port); +static void belkin_sa_read_int_callback(struct urb *urb); +static void belkin_sa_process_read_urb(struct urb *urb); +static void belkin_sa_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios * old); +static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state); +static int belkin_sa_tiocmget(struct tty_struct *tty); +static int belkin_sa_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); + + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(BELKIN_SA_VID, BELKIN_SA_PID) }, + { USB_DEVICE(BELKIN_OLD_VID, BELKIN_OLD_PID) }, + { USB_DEVICE(PERACOM_VID, PERACOM_PID) }, + { USB_DEVICE(GOHUBS_VID, GOHUBS_PID) }, + { USB_DEVICE(GOHUBS_VID, HANDYLINK_PID) }, + { USB_DEVICE(BELKIN_DOCKSTATION_VID, BELKIN_DOCKSTATION_PID) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* All of the device info needed for the serial converters */ +static struct usb_serial_driver belkin_device = { + .driver = { + .owner = THIS_MODULE, + .name = "belkin", + }, + .description = "Belkin / Peracom / GoHubs USB Serial Adapter", + .id_table = id_table, + .num_ports = 1, + .open = belkin_sa_open, + .close = belkin_sa_close, + .read_int_callback = belkin_sa_read_int_callback, + .process_read_urb = belkin_sa_process_read_urb, + .set_termios = belkin_sa_set_termios, + .break_ctl = belkin_sa_break_ctl, + .tiocmget = belkin_sa_tiocmget, + .tiocmset = belkin_sa_tiocmset, + .port_probe = belkin_sa_port_probe, + .port_remove = belkin_sa_port_remove, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &belkin_device, NULL +}; + +struct belkin_sa_private { + spinlock_t lock; + unsigned long control_state; + unsigned char last_lsr; + unsigned char last_msr; + int bad_flow_control; +}; + + +/* + * *************************************************************************** + * Belkin USB Serial Adapter F5U103 specific driver functions + * *************************************************************************** + */ + +#define WDR_TIMEOUT 5000 /* default urb timeout */ + +/* assumes that struct usb_serial *serial is available */ +#define BSA_USB_CMD(c, v) usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), \ + (c), BELKIN_SA_SET_REQUEST_TYPE, \ + (v), 0, NULL, 0, WDR_TIMEOUT) + +static int belkin_sa_port_probe(struct usb_serial_port *port) +{ + struct usb_device *dev = port->serial->dev; + struct belkin_sa_private *priv; + + priv = kmalloc(sizeof(struct belkin_sa_private), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + priv->control_state = 0; + priv->last_lsr = 0; + priv->last_msr = 0; + /* see comments at top of file */ + priv->bad_flow_control = + (le16_to_cpu(dev->descriptor.bcdDevice) <= 0x0206) ? 1 : 0; + dev_info(&dev->dev, "bcdDevice: %04x, bfc: %d\n", + le16_to_cpu(dev->descriptor.bcdDevice), + priv->bad_flow_control); + + usb_set_serial_port_data(port, priv); + + return 0; +} + +static int belkin_sa_port_remove(struct usb_serial_port *port) +{ + struct belkin_sa_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} + +static int belkin_sa_open(struct tty_struct *tty, + struct usb_serial_port *port) +{ + int retval; + + retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (retval) { + dev_err(&port->dev, "usb_submit_urb(read int) failed\n"); + return retval; + } + + retval = usb_serial_generic_open(tty, port); + if (retval) + usb_kill_urb(port->interrupt_in_urb); + + return retval; +} + +static void belkin_sa_close(struct usb_serial_port *port) +{ + usb_serial_generic_close(port); + usb_kill_urb(port->interrupt_in_urb); +} + +static void belkin_sa_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct belkin_sa_private *priv; + unsigned char *data = urb->transfer_buffer; + int retval; + int status = urb->status; + unsigned long flags; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", + __func__, status); + goto exit; + } + + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); + + /* Handle known interrupt data */ + /* ignore data[0] and data[1] */ + + priv = usb_get_serial_port_data(port); + spin_lock_irqsave(&priv->lock, flags); + priv->last_msr = data[BELKIN_SA_MSR_INDEX]; + + /* Record Control Line states */ + if (priv->last_msr & BELKIN_SA_MSR_DSR) + priv->control_state |= TIOCM_DSR; + else + priv->control_state &= ~TIOCM_DSR; + + if (priv->last_msr & BELKIN_SA_MSR_CTS) + priv->control_state |= TIOCM_CTS; + else + priv->control_state &= ~TIOCM_CTS; + + if (priv->last_msr & BELKIN_SA_MSR_RI) + priv->control_state |= TIOCM_RI; + else + priv->control_state &= ~TIOCM_RI; + + if (priv->last_msr & BELKIN_SA_MSR_CD) + priv->control_state |= TIOCM_CD; + else + priv->control_state &= ~TIOCM_CD; + + priv->last_lsr = data[BELKIN_SA_LSR_INDEX]; + spin_unlock_irqrestore(&priv->lock, flags); +exit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + dev_err(&port->dev, "%s - usb_submit_urb failed with " + "result %d\n", __func__, retval); +} + +static void belkin_sa_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct belkin_sa_private *priv = usb_get_serial_port_data(port); + unsigned char *data = urb->transfer_buffer; + unsigned long flags; + unsigned char status; + char tty_flag; + + /* Update line status */ + tty_flag = TTY_NORMAL; + + spin_lock_irqsave(&priv->lock, flags); + status = priv->last_lsr; + priv->last_lsr &= ~BELKIN_SA_LSR_ERR; + spin_unlock_irqrestore(&priv->lock, flags); + + if (!urb->actual_length) + return; + + if (status & BELKIN_SA_LSR_ERR) { + /* Break takes precedence over parity, which takes precedence + * over framing errors. */ + if (status & BELKIN_SA_LSR_BI) + tty_flag = TTY_BREAK; + else if (status & BELKIN_SA_LSR_PE) + tty_flag = TTY_PARITY; + else if (status & BELKIN_SA_LSR_FE) + tty_flag = TTY_FRAME; + dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag); + + /* Overrun is special, not associated with a char. */ + if (status & BELKIN_SA_LSR_OE) + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); + } + + tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag, + urb->actual_length); + tty_flip_buffer_push(&port->port); +} + +static void belkin_sa_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + struct usb_serial *serial = port->serial; + struct belkin_sa_private *priv = usb_get_serial_port_data(port); + unsigned int iflag; + unsigned int cflag; + unsigned int old_iflag = 0; + unsigned int old_cflag = 0; + __u16 urb_value = 0; /* Will hold the new flags */ + unsigned long flags; + unsigned long control_state; + int bad_flow_control; + speed_t baud; + struct ktermios *termios = &tty->termios; + + iflag = termios->c_iflag; + cflag = termios->c_cflag; + + termios->c_cflag &= ~CMSPAR; + + /* get a local copy of the current port settings */ + spin_lock_irqsave(&priv->lock, flags); + control_state = priv->control_state; + bad_flow_control = priv->bad_flow_control; + spin_unlock_irqrestore(&priv->lock, flags); + + old_iflag = old_termios->c_iflag; + old_cflag = old_termios->c_cflag; + + /* Set the baud rate */ + if ((cflag & CBAUD) != (old_cflag & CBAUD)) { + /* reassert DTR and (maybe) RTS on transition from B0 */ + if ((old_cflag & CBAUD) == B0) { + control_state |= (TIOCM_DTR|TIOCM_RTS); + if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 1) < 0) + dev_err(&port->dev, "Set DTR error\n"); + /* don't set RTS if using hardware flow control */ + if (!(old_cflag & CRTSCTS)) + if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST + , 1) < 0) + dev_err(&port->dev, "Set RTS error\n"); + } + } + + baud = tty_get_baud_rate(tty); + if (baud) { + urb_value = BELKIN_SA_BAUD(baud); + /* Clip to maximum speed */ + if (urb_value == 0) + urb_value = 1; + /* Turn it back into a resulting real baud rate */ + baud = BELKIN_SA_BAUD(urb_value); + + /* Report the actual baud rate back to the caller */ + tty_encode_baud_rate(tty, baud, baud); + if (BSA_USB_CMD(BELKIN_SA_SET_BAUDRATE_REQUEST, urb_value) < 0) + dev_err(&port->dev, "Set baudrate error\n"); + } else { + /* Disable flow control */ + if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST, + BELKIN_SA_FLOW_NONE) < 0) + dev_err(&port->dev, "Disable flowcontrol error\n"); + /* Drop RTS and DTR */ + control_state &= ~(TIOCM_DTR | TIOCM_RTS); + if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 0) < 0) + dev_err(&port->dev, "DTR LOW error\n"); + if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, 0) < 0) + dev_err(&port->dev, "RTS LOW error\n"); + } + + /* set the parity */ + if ((cflag ^ old_cflag) & (PARENB | PARODD)) { + if (cflag & PARENB) + urb_value = (cflag & PARODD) ? BELKIN_SA_PARITY_ODD + : BELKIN_SA_PARITY_EVEN; + else + urb_value = BELKIN_SA_PARITY_NONE; + if (BSA_USB_CMD(BELKIN_SA_SET_PARITY_REQUEST, urb_value) < 0) + dev_err(&port->dev, "Set parity error\n"); + } + + /* set the number of data bits */ + if ((cflag & CSIZE) != (old_cflag & CSIZE)) { + switch (cflag & CSIZE) { + case CS5: + urb_value = BELKIN_SA_DATA_BITS(5); + break; + case CS6: + urb_value = BELKIN_SA_DATA_BITS(6); + break; + case CS7: + urb_value = BELKIN_SA_DATA_BITS(7); + break; + case CS8: + urb_value = BELKIN_SA_DATA_BITS(8); + break; + default: + dev_dbg(&port->dev, + "CSIZE was not CS5-CS8, using default of 8\n"); + urb_value = BELKIN_SA_DATA_BITS(8); + break; + } + if (BSA_USB_CMD(BELKIN_SA_SET_DATA_BITS_REQUEST, urb_value) < 0) + dev_err(&port->dev, "Set data bits error\n"); + } + + /* set the number of stop bits */ + if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { + urb_value = (cflag & CSTOPB) ? BELKIN_SA_STOP_BITS(2) + : BELKIN_SA_STOP_BITS(1); + if (BSA_USB_CMD(BELKIN_SA_SET_STOP_BITS_REQUEST, + urb_value) < 0) + dev_err(&port->dev, "Set stop bits error\n"); + } + + /* Set flow control */ + if (((iflag ^ old_iflag) & (IXOFF | IXON)) || + ((cflag ^ old_cflag) & CRTSCTS)) { + urb_value = 0; + if ((iflag & IXOFF) || (iflag & IXON)) + urb_value |= (BELKIN_SA_FLOW_OXON | BELKIN_SA_FLOW_IXON); + else + urb_value &= ~(BELKIN_SA_FLOW_OXON | BELKIN_SA_FLOW_IXON); + + if (cflag & CRTSCTS) + urb_value |= (BELKIN_SA_FLOW_OCTS | BELKIN_SA_FLOW_IRTS); + else + urb_value &= ~(BELKIN_SA_FLOW_OCTS | BELKIN_SA_FLOW_IRTS); + + if (bad_flow_control) + urb_value &= ~(BELKIN_SA_FLOW_IRTS); + + if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST, urb_value) < 0) + dev_err(&port->dev, "Set flow control error\n"); + } + + /* save off the modified port settings */ + spin_lock_irqsave(&priv->lock, flags); + priv->control_state = control_state; + spin_unlock_irqrestore(&priv->lock, flags); +} + +static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + + if (BSA_USB_CMD(BELKIN_SA_SET_BREAK_REQUEST, break_state ? 1 : 0) < 0) + dev_err(&port->dev, "Set break_ctl %d\n", break_state); +} + +static int belkin_sa_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct belkin_sa_private *priv = usb_get_serial_port_data(port); + unsigned long control_state; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + control_state = priv->control_state; + spin_unlock_irqrestore(&priv->lock, flags); + + return control_state; +} + +static int belkin_sa_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + struct belkin_sa_private *priv = usb_get_serial_port_data(port); + unsigned long control_state; + unsigned long flags; + int retval; + int rts = 0; + int dtr = 0; + + spin_lock_irqsave(&priv->lock, flags); + control_state = priv->control_state; + + if (set & TIOCM_RTS) { + control_state |= TIOCM_RTS; + rts = 1; + } + if (set & TIOCM_DTR) { + control_state |= TIOCM_DTR; + dtr = 1; + } + if (clear & TIOCM_RTS) { + control_state &= ~TIOCM_RTS; + rts = 0; + } + if (clear & TIOCM_DTR) { + control_state &= ~TIOCM_DTR; + dtr = 0; + } + + priv->control_state = control_state; + spin_unlock_irqrestore(&priv->lock, flags); + + retval = BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, rts); + if (retval < 0) { + dev_err(&port->dev, "Set RTS error %d\n", retval); + goto exit; + } + + retval = BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, dtr); + if (retval < 0) { + dev_err(&port->dev, "Set DTR error %d\n", retval); + goto exit; + } +exit: + return retval; +} + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/belkin_sa.h b/kernel/drivers/usb/serial/belkin_sa.h new file mode 100644 index 000000000..c74b58ab5 --- /dev/null +++ b/kernel/drivers/usb/serial/belkin_sa.h @@ -0,0 +1,124 @@ +/* + * Definitions for Belkin USB Serial Adapter Driver + * + * Copyright (C) 2000 + * William Greathouse (wgreathouse@smva.com) + * + * This program is largely derived from work by the linux-usb group + * and associated source files. Please see the usb/serial files for + * individual credits and copyrights. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * See Documentation/usb/usb-serial.txt for more information on using this + * driver + * + * 12-Mar-2001 gkh + * Added GoHubs GO-COM232 device id. + * + * 06-Nov-2000 gkh + * Added old Belkin and Peracom device ids, which this driver supports + * + * 12-Oct-2000 William Greathouse + * First cut at supporting Belkin USB Serial Adapter F5U103 + * I did not have a copy of the original work to support this + * adapter, so pardon any stupid mistakes. All of the information + * I am using to write this driver was acquired by using a modified + * UsbSnoop on Windows2000. + * + */ + +#ifndef __LINUX_USB_SERIAL_BSA_H +#define __LINUX_USB_SERIAL_BSA_H + +#define BELKIN_DOCKSTATION_VID 0x050d /* Vendor Id */ +#define BELKIN_DOCKSTATION_PID 0x1203 /* Product Id */ + +#define BELKIN_SA_VID 0x050d /* Vendor Id */ +#define BELKIN_SA_PID 0x0103 /* Product Id */ + +#define BELKIN_OLD_VID 0x056c /* Belkin's "old" vendor id */ +#define BELKIN_OLD_PID 0x8007 /* Belkin's "old" single port serial converter's id */ + +#define PERACOM_VID 0x0565 /* Peracom's vendor id */ +#define PERACOM_PID 0x0001 /* Peracom's single port serial converter's id */ + +#define GOHUBS_VID 0x0921 /* GoHubs vendor id */ +#define GOHUBS_PID 0x1000 /* GoHubs single port serial converter's id (identical to the Peracom device) */ +#define HANDYLINK_PID 0x1200 /* HandyLink USB's id (identical to the Peracom device) */ + +/* Vendor Request Interface */ +#define BELKIN_SA_SET_BAUDRATE_REQUEST 0 /* Set baud rate */ +#define BELKIN_SA_SET_STOP_BITS_REQUEST 1 /* Set stop bits (1,2) */ +#define BELKIN_SA_SET_DATA_BITS_REQUEST 2 /* Set data bits (5,6,7,8) */ +#define BELKIN_SA_SET_PARITY_REQUEST 3 /* Set parity (None, Even, Odd) */ + +#define BELKIN_SA_SET_DTR_REQUEST 10 /* Set DTR state */ +#define BELKIN_SA_SET_RTS_REQUEST 11 /* Set RTS state */ +#define BELKIN_SA_SET_BREAK_REQUEST 12 /* Set BREAK state */ + +#define BELKIN_SA_SET_FLOW_CTRL_REQUEST 16 /* Set flow control mode */ + + +#ifdef WHEN_I_LEARN_THIS +#define BELKIN_SA_SET_MAGIC_REQUEST 17 /* I don't know, possibly flush */ + /* (always in Wininit sequence before flow control) */ +#define BELKIN_SA_RESET xx /* Reset the port */ +#define BELKIN_SA_GET_MODEM_STATUS xx /* Force return of modem status register */ +#endif + +#define BELKIN_SA_SET_REQUEST_TYPE 0x40 + +#define BELKIN_SA_BAUD(b) (230400/b) + +#define BELKIN_SA_STOP_BITS(b) (b-1) + +#define BELKIN_SA_DATA_BITS(b) (b-5) + +#define BELKIN_SA_PARITY_NONE 0 +#define BELKIN_SA_PARITY_EVEN 1 +#define BELKIN_SA_PARITY_ODD 2 +#define BELKIN_SA_PARITY_MARK 3 +#define BELKIN_SA_PARITY_SPACE 4 + +#define BELKIN_SA_FLOW_NONE 0x0000 /* No flow control */ +#define BELKIN_SA_FLOW_OCTS 0x0001 /* use CTS input to throttle output */ +#define BELKIN_SA_FLOW_ODSR 0x0002 /* use DSR input to throttle output */ +#define BELKIN_SA_FLOW_IDSR 0x0004 /* use DSR input to enable receive */ +#define BELKIN_SA_FLOW_IDTR 0x0008 /* use DTR output for input flow control */ +#define BELKIN_SA_FLOW_IRTS 0x0010 /* use RTS output for input flow control */ +#define BELKIN_SA_FLOW_ORTS 0x0020 /* use RTS to indicate data available to send */ +#define BELKIN_SA_FLOW_ERRSUB 0x0040 /* ???? guess ???? substitute inline errors */ +#define BELKIN_SA_FLOW_OXON 0x0080 /* use XON/XOFF for output flow control */ +#define BELKIN_SA_FLOW_IXON 0x0100 /* use XON/XOFF for input flow control */ + +/* + * It seems that the interrupt pipe is closely modelled after the + * 16550 register layout. This is probably because the adapter can + * be used in a "DOS" environment to simulate a standard hardware port. + */ +#define BELKIN_SA_LSR_INDEX 2 /* Line Status Register */ +#define BELKIN_SA_LSR_RDR 0x01 /* receive data ready */ +#define BELKIN_SA_LSR_OE 0x02 /* overrun error */ +#define BELKIN_SA_LSR_PE 0x04 /* parity error */ +#define BELKIN_SA_LSR_FE 0x08 /* framing error */ +#define BELKIN_SA_LSR_BI 0x10 /* break indicator */ +#define BELKIN_SA_LSR_THE 0x20 /* tx holding register empty */ +#define BELKIN_SA_LSR_TE 0x40 /* transmit register empty */ +#define BELKIN_SA_LSR_ERR 0x80 /* OE | PE | FE | BI */ + +#define BELKIN_SA_MSR_INDEX 3 /* Modem Status Register */ +#define BELKIN_SA_MSR_DCTS 0x01 /* Delta CTS */ +#define BELKIN_SA_MSR_DDSR 0x02 /* Delta DSR */ +#define BELKIN_SA_MSR_DRI 0x04 /* Delta RI */ +#define BELKIN_SA_MSR_DCD 0x08 /* Delta CD */ +#define BELKIN_SA_MSR_CTS 0x10 /* Current CTS */ +#define BELKIN_SA_MSR_DSR 0x20 /* Current DSR */ +#define BELKIN_SA_MSR_RI 0x40 /* Current RI */ +#define BELKIN_SA_MSR_CD 0x80 /* Current CD */ + +#endif /* __LINUX_USB_SERIAL_BSA_H */ + diff --git a/kernel/drivers/usb/serial/bus.c b/kernel/drivers/usb/serial/bus.c new file mode 100644 index 000000000..8936a83c9 --- /dev/null +++ b/kernel/drivers/usb/serial/bus.c @@ -0,0 +1,192 @@ +/* + * USB Serial Converter Bus specific functions + * + * Copyright (C) 2002 Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/tty.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +static int usb_serial_device_match(struct device *dev, + struct device_driver *drv) +{ + struct usb_serial_driver *driver; + const struct usb_serial_port *port; + + /* + * drivers are already assigned to ports in serial_probe so it's + * a simple check here. + */ + port = to_usb_serial_port(dev); + if (!port) + return 0; + + driver = to_usb_serial_driver(drv); + + if (driver == port->serial->type) + return 1; + + return 0; +} + +static int usb_serial_device_probe(struct device *dev) +{ + struct usb_serial_driver *driver; + struct usb_serial_port *port; + struct device *tty_dev; + int retval = 0; + int minor; + + port = to_usb_serial_port(dev); + if (!port) + return -ENODEV; + + /* make sure suspend/resume doesn't race against port_probe */ + retval = usb_autopm_get_interface(port->serial->interface); + if (retval) + return retval; + + driver = port->serial->type; + if (driver->port_probe) { + retval = driver->port_probe(port); + if (retval) + goto err_autopm_put; + } + + minor = port->minor; + tty_dev = tty_register_device(usb_serial_tty_driver, minor, dev); + if (IS_ERR(tty_dev)) { + retval = PTR_ERR(tty_dev); + goto err_port_remove; + } + + usb_autopm_put_interface(port->serial->interface); + + dev_info(&port->serial->dev->dev, + "%s converter now attached to ttyUSB%d\n", + driver->description, minor); + + return 0; + +err_port_remove: + if (driver->port_remove) + driver->port_remove(port); +err_autopm_put: + usb_autopm_put_interface(port->serial->interface); + + return retval; +} + +static int usb_serial_device_remove(struct device *dev) +{ + struct usb_serial_driver *driver; + struct usb_serial_port *port; + int retval = 0; + int minor; + int autopm_err; + + port = to_usb_serial_port(dev); + if (!port) + return -ENODEV; + + /* + * Make sure suspend/resume doesn't race against port_remove. + * + * Note that no further runtime PM callbacks will be made if + * autopm_get fails. + */ + autopm_err = usb_autopm_get_interface(port->serial->interface); + + minor = port->minor; + tty_unregister_device(usb_serial_tty_driver, minor); + + driver = port->serial->type; + if (driver->port_remove) + retval = driver->port_remove(port); + + dev_info(dev, "%s converter now disconnected from ttyUSB%d\n", + driver->description, minor); + + if (!autopm_err) + usb_autopm_put_interface(port->serial->interface); + + return retval; +} + +static ssize_t new_id_store(struct device_driver *driver, + const char *buf, size_t count) +{ + struct usb_serial_driver *usb_drv = to_usb_serial_driver(driver); + ssize_t retval = usb_store_new_id(&usb_drv->dynids, usb_drv->id_table, + driver, buf, count); + + if (retval >= 0 && usb_drv->usb_driver != NULL) + retval = usb_store_new_id(&usb_drv->usb_driver->dynids, + usb_drv->usb_driver->id_table, + &usb_drv->usb_driver->drvwrap.driver, + buf, count); + return retval; +} + +static ssize_t new_id_show(struct device_driver *driver, char *buf) +{ + struct usb_serial_driver *usb_drv = to_usb_serial_driver(driver); + + return usb_show_dynids(&usb_drv->dynids, buf); +} +static DRIVER_ATTR_RW(new_id); + +static struct attribute *usb_serial_drv_attrs[] = { + &driver_attr_new_id.attr, + NULL, +}; +ATTRIBUTE_GROUPS(usb_serial_drv); + +static void free_dynids(struct usb_serial_driver *drv) +{ + struct usb_dynid *dynid, *n; + + spin_lock(&drv->dynids.lock); + list_for_each_entry_safe(dynid, n, &drv->dynids.list, node) { + list_del(&dynid->node); + kfree(dynid); + } + spin_unlock(&drv->dynids.lock); +} + +struct bus_type usb_serial_bus_type = { + .name = "usb-serial", + .match = usb_serial_device_match, + .probe = usb_serial_device_probe, + .remove = usb_serial_device_remove, + .drv_groups = usb_serial_drv_groups, +}; + +int usb_serial_bus_register(struct usb_serial_driver *driver) +{ + int retval; + + driver->driver.bus = &usb_serial_bus_type; + spin_lock_init(&driver->dynids.lock); + INIT_LIST_HEAD(&driver->dynids.list); + + retval = driver_register(&driver->driver); + + return retval; +} + +void usb_serial_bus_deregister(struct usb_serial_driver *driver) +{ + free_dynids(driver); + driver_unregister(&driver->driver); +} + diff --git a/kernel/drivers/usb/serial/ch341.c b/kernel/drivers/usb/serial/ch341.c new file mode 100644 index 000000000..c73808f09 --- /dev/null +++ b/kernel/drivers/usb/serial/ch341.c @@ -0,0 +1,580 @@ +/* + * Copyright 2007, Frank A Kingswood <frank@kingswood-consulting.co.uk> + * Copyright 2007, Werner Cornelius <werner@cornelius-consult.de> + * Copyright 2009, Boris Hajduk <boris@hajduk.org> + * + * ch341.c implements a serial port driver for the Winchiphead CH341. + * + * The CH341 device can be used to implement an RS232 asynchronous + * serial port, an IEEE-1284 parallel printer port or a memory-like + * interface. In all cases the CH341 supports an I2C interface as well. + * This driver only supports the asynchronous serial interface. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/serial.h> +#include <asm/unaligned.h> + +#define DEFAULT_BAUD_RATE 9600 +#define DEFAULT_TIMEOUT 1000 + +/* flags for IO-Bits */ +#define CH341_BIT_RTS (1 << 6) +#define CH341_BIT_DTR (1 << 5) + +/******************************/ +/* interrupt pipe definitions */ +/******************************/ +/* always 4 interrupt bytes */ +/* first irq byte normally 0x08 */ +/* second irq byte base 0x7d + below */ +/* third irq byte base 0x94 + below */ +/* fourth irq byte normally 0xee */ + +/* second interrupt byte */ +#define CH341_MULT_STAT 0x04 /* multiple status since last interrupt event */ + +/* status returned in third interrupt answer byte, inverted in data + from irq */ +#define CH341_BIT_CTS 0x01 +#define CH341_BIT_DSR 0x02 +#define CH341_BIT_RI 0x04 +#define CH341_BIT_DCD 0x08 +#define CH341_BITS_MODEM_STAT 0x0f /* all bits */ + +/*******************************/ +/* baudrate calculation factor */ +/*******************************/ +#define CH341_BAUDBASE_FACTOR 1532620800 +#define CH341_BAUDBASE_DIVMAX 3 + +/* Break support - the information used to implement this was gleaned from + * the Net/FreeBSD uchcom.c driver by Takanori Watanabe. Domo arigato. + */ + +#define CH341_REQ_WRITE_REG 0x9A +#define CH341_REQ_READ_REG 0x95 +#define CH341_REG_BREAK1 0x05 +#define CH341_REG_BREAK2 0x18 +#define CH341_NBREAK_BITS_REG1 0x01 +#define CH341_NBREAK_BITS_REG2 0x40 + + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(0x4348, 0x5523) }, + { USB_DEVICE(0x1a86, 0x7523) }, + { USB_DEVICE(0x1a86, 0x5523) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +struct ch341_private { + spinlock_t lock; /* access lock */ + unsigned baud_rate; /* set baud rate */ + u8 line_control; /* set line control value RTS/DTR */ + u8 line_status; /* active status of modem control inputs */ +}; + +static void ch341_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old_termios); + +static int ch341_control_out(struct usb_device *dev, u8 request, + u16 value, u16 index) +{ + int r; + + dev_dbg(&dev->dev, "ch341_control_out(%02x,%02x,%04x,%04x)\n", + USB_DIR_OUT|0x40, (int)request, (int)value, (int)index); + + r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + value, index, NULL, 0, DEFAULT_TIMEOUT); + + return r; +} + +static int ch341_control_in(struct usb_device *dev, + u8 request, u16 value, u16 index, + char *buf, unsigned bufsize) +{ + int r; + + dev_dbg(&dev->dev, "ch341_control_in(%02x,%02x,%04x,%04x,%p,%u)\n", + USB_DIR_IN|0x40, (int)request, (int)value, (int)index, buf, + (int)bufsize); + + r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, + value, index, buf, bufsize, DEFAULT_TIMEOUT); + return r; +} + +static int ch341_set_baudrate(struct usb_device *dev, + struct ch341_private *priv) +{ + short a, b; + int r; + unsigned long factor; + short divisor; + + if (!priv->baud_rate) + return -EINVAL; + factor = (CH341_BAUDBASE_FACTOR / priv->baud_rate); + divisor = CH341_BAUDBASE_DIVMAX; + + while ((factor > 0xfff0) && divisor) { + factor >>= 3; + divisor--; + } + + if (factor > 0xfff0) + return -EINVAL; + + factor = 0x10000 - factor; + a = (factor & 0xff00) | divisor; + b = factor & 0xff; + + r = ch341_control_out(dev, 0x9a, 0x1312, a); + if (!r) + r = ch341_control_out(dev, 0x9a, 0x0f2c, b); + + return r; +} + +static int ch341_set_handshake(struct usb_device *dev, u8 control) +{ + return ch341_control_out(dev, 0xa4, ~control, 0); +} + +static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv) +{ + char *buffer; + int r; + const unsigned size = 8; + unsigned long flags; + + buffer = kmalloc(size, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + r = ch341_control_in(dev, 0x95, 0x0706, 0, buffer, size); + if (r < 0) + goto out; + + /* setup the private status if available */ + if (r == 2) { + r = 0; + spin_lock_irqsave(&priv->lock, flags); + priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT; + spin_unlock_irqrestore(&priv->lock, flags); + } else + r = -EPROTO; + +out: kfree(buffer); + return r; +} + +/* -------------------------------------------------------------------------- */ + +static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) +{ + char *buffer; + int r; + const unsigned size = 8; + + buffer = kmalloc(size, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + /* expect two bytes 0x27 0x00 */ + r = ch341_control_in(dev, 0x5f, 0, 0, buffer, size); + if (r < 0) + goto out; + + r = ch341_control_out(dev, 0xa1, 0, 0); + if (r < 0) + goto out; + + r = ch341_set_baudrate(dev, priv); + if (r < 0) + goto out; + + /* expect two bytes 0x56 0x00 */ + r = ch341_control_in(dev, 0x95, 0x2518, 0, buffer, size); + if (r < 0) + goto out; + + r = ch341_control_out(dev, 0x9a, 0x2518, 0x0050); + if (r < 0) + goto out; + + /* expect 0xff 0xee */ + r = ch341_get_status(dev, priv); + if (r < 0) + goto out; + + r = ch341_control_out(dev, 0xa1, 0x501f, 0xd90a); + if (r < 0) + goto out; + + r = ch341_set_baudrate(dev, priv); + if (r < 0) + goto out; + + r = ch341_set_handshake(dev, priv->line_control); + if (r < 0) + goto out; + + /* expect 0x9f 0xee */ + r = ch341_get_status(dev, priv); + +out: kfree(buffer); + return r; +} + +static int ch341_port_probe(struct usb_serial_port *port) +{ + struct ch341_private *priv; + int r; + + priv = kzalloc(sizeof(struct ch341_private), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + priv->baud_rate = DEFAULT_BAUD_RATE; + priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; + + r = ch341_configure(port->serial->dev, priv); + if (r < 0) + goto error; + + usb_set_serial_port_data(port, priv); + return 0; + +error: kfree(priv); + return r; +} + +static int ch341_port_remove(struct usb_serial_port *port) +{ + struct ch341_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} + +static int ch341_carrier_raised(struct usb_serial_port *port) +{ + struct ch341_private *priv = usb_get_serial_port_data(port); + if (priv->line_status & CH341_BIT_DCD) + return 1; + return 0; +} + +static void ch341_dtr_rts(struct usb_serial_port *port, int on) +{ + struct ch341_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + /* drop DTR and RTS */ + spin_lock_irqsave(&priv->lock, flags); + if (on) + priv->line_control |= CH341_BIT_RTS | CH341_BIT_DTR; + else + priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR); + spin_unlock_irqrestore(&priv->lock, flags); + ch341_set_handshake(port->serial->dev, priv->line_control); +} + +static void ch341_close(struct usb_serial_port *port) +{ + usb_serial_generic_close(port); + usb_kill_urb(port->interrupt_in_urb); +} + + +/* open this device, set default parameters */ +static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct ch341_private *priv = usb_get_serial_port_data(port); + int r; + + r = ch341_configure(serial->dev, priv); + if (r) + goto out; + + if (tty) + ch341_set_termios(tty, port, NULL); + + dev_dbg(&port->dev, "%s - submitting interrupt urb\n", __func__); + r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (r) { + dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n", + __func__, r); + goto out; + } + + r = usb_serial_generic_open(tty, port); + +out: return r; +} + +/* Old_termios contains the original termios settings and + * tty->termios contains the new setting to be used. + */ +static void ch341_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + struct ch341_private *priv = usb_get_serial_port_data(port); + unsigned baud_rate; + unsigned long flags; + + baud_rate = tty_get_baud_rate(tty); + + priv->baud_rate = baud_rate; + + if (baud_rate) { + spin_lock_irqsave(&priv->lock, flags); + priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS); + spin_unlock_irqrestore(&priv->lock, flags); + ch341_set_baudrate(port->serial->dev, priv); + } else { + spin_lock_irqsave(&priv->lock, flags); + priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS); + spin_unlock_irqrestore(&priv->lock, flags); + } + + ch341_set_handshake(port->serial->dev, priv->line_control); + + /* Unimplemented: + * (cflag & CSIZE) : data bits [5, 8] + * (cflag & PARENB) : parity {NONE, EVEN, ODD} + * (cflag & CSTOPB) : stop bits [1, 2] + */ +} + +static void ch341_break_ctl(struct tty_struct *tty, int break_state) +{ + const uint16_t ch341_break_reg = + CH341_REG_BREAK1 | ((uint16_t) CH341_REG_BREAK2 << 8); + struct usb_serial_port *port = tty->driver_data; + int r; + uint16_t reg_contents; + uint8_t *break_reg; + + break_reg = kmalloc(2, GFP_KERNEL); + if (!break_reg) + return; + + r = ch341_control_in(port->serial->dev, CH341_REQ_READ_REG, + ch341_break_reg, 0, break_reg, 2); + if (r < 0) { + dev_err(&port->dev, "%s - USB control read error (%d)\n", + __func__, r); + goto out; + } + dev_dbg(&port->dev, "%s - initial ch341 break register contents - reg1: %x, reg2: %x\n", + __func__, break_reg[0], break_reg[1]); + if (break_state != 0) { + dev_dbg(&port->dev, "%s - Enter break state requested\n", __func__); + break_reg[0] &= ~CH341_NBREAK_BITS_REG1; + break_reg[1] &= ~CH341_NBREAK_BITS_REG2; + } else { + dev_dbg(&port->dev, "%s - Leave break state requested\n", __func__); + break_reg[0] |= CH341_NBREAK_BITS_REG1; + break_reg[1] |= CH341_NBREAK_BITS_REG2; + } + dev_dbg(&port->dev, "%s - New ch341 break register contents - reg1: %x, reg2: %x\n", + __func__, break_reg[0], break_reg[1]); + reg_contents = get_unaligned_le16(break_reg); + r = ch341_control_out(port->serial->dev, CH341_REQ_WRITE_REG, + ch341_break_reg, reg_contents); + if (r < 0) + dev_err(&port->dev, "%s - USB control write error (%d)\n", + __func__, r); +out: + kfree(break_reg); +} + +static int ch341_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct ch341_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 control; + + spin_lock_irqsave(&priv->lock, flags); + if (set & TIOCM_RTS) + priv->line_control |= CH341_BIT_RTS; + if (set & TIOCM_DTR) + priv->line_control |= CH341_BIT_DTR; + if (clear & TIOCM_RTS) + priv->line_control &= ~CH341_BIT_RTS; + if (clear & TIOCM_DTR) + priv->line_control &= ~CH341_BIT_DTR; + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + + return ch341_set_handshake(port->serial->dev, control); +} + +static void ch341_update_line_status(struct usb_serial_port *port, + unsigned char *data, size_t len) +{ + struct ch341_private *priv = usb_get_serial_port_data(port); + struct tty_struct *tty; + unsigned long flags; + u8 status; + u8 delta; + + if (len < 4) + return; + + status = ~data[2] & CH341_BITS_MODEM_STAT; + + spin_lock_irqsave(&priv->lock, flags); + delta = status ^ priv->line_status; + priv->line_status = status; + spin_unlock_irqrestore(&priv->lock, flags); + + if (data[1] & CH341_MULT_STAT) + dev_dbg(&port->dev, "%s - multiple status change\n", __func__); + + if (!delta) + return; + + if (delta & CH341_BIT_CTS) + port->icount.cts++; + if (delta & CH341_BIT_DSR) + port->icount.dsr++; + if (delta & CH341_BIT_RI) + port->icount.rng++; + if (delta & CH341_BIT_DCD) { + port->icount.dcd++; + tty = tty_port_tty_get(&port->port); + if (tty) { + usb_serial_handle_dcd_change(port, tty, + status & CH341_BIT_DCD); + tty_kref_put(tty); + } + } + + wake_up_interruptible(&port->port.delta_msr_wait); +} + +static void ch341_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + unsigned int len = urb->actual_length; + int status; + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&urb->dev->dev, "%s - urb shutting down: %d\n", + __func__, urb->status); + return; + default: + dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", + __func__, urb->status); + goto exit; + } + + usb_serial_debug_data(&port->dev, __func__, len, data); + ch341_update_line_status(port, data, len); +exit: + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status) { + dev_err(&urb->dev->dev, "%s - usb_submit_urb failed: %d\n", + __func__, status); + } +} + +static int ch341_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct ch341_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 mcr; + u8 status; + unsigned int result; + + spin_lock_irqsave(&priv->lock, flags); + mcr = priv->line_control; + status = priv->line_status; + spin_unlock_irqrestore(&priv->lock, flags); + + result = ((mcr & CH341_BIT_DTR) ? TIOCM_DTR : 0) + | ((mcr & CH341_BIT_RTS) ? TIOCM_RTS : 0) + | ((status & CH341_BIT_CTS) ? TIOCM_CTS : 0) + | ((status & CH341_BIT_DSR) ? TIOCM_DSR : 0) + | ((status & CH341_BIT_RI) ? TIOCM_RI : 0) + | ((status & CH341_BIT_DCD) ? TIOCM_CD : 0); + + dev_dbg(&port->dev, "%s - result = %x\n", __func__, result); + + return result; +} + +static int ch341_reset_resume(struct usb_serial *serial) +{ + struct ch341_private *priv; + + priv = usb_get_serial_port_data(serial->port[0]); + + /* reconfigure ch341 serial port after bus-reset */ + ch341_configure(serial->dev, priv); + + return 0; +} + +static struct usb_serial_driver ch341_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ch341-uart", + }, + .id_table = id_table, + .num_ports = 1, + .open = ch341_open, + .dtr_rts = ch341_dtr_rts, + .carrier_raised = ch341_carrier_raised, + .close = ch341_close, + .set_termios = ch341_set_termios, + .break_ctl = ch341_break_ctl, + .tiocmget = ch341_tiocmget, + .tiocmset = ch341_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .read_int_callback = ch341_read_int_callback, + .port_probe = ch341_port_probe, + .port_remove = ch341_port_remove, + .reset_resume = ch341_reset_resume, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &ch341_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/console.c b/kernel/drivers/usb/serial/console.c new file mode 100644 index 000000000..3806e7014 --- /dev/null +++ b/kernel/drivers/usb/serial/console.c @@ -0,0 +1,307 @@ +/* + * USB Serial Console driver + * + * Copyright (C) 2001 - 2002 Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * Thanks to Randy Dunlap for the original version of this code. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/console.h> +#include <linux/serial.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +struct usbcons_info { + int magic; + int break_flag; + struct usb_serial_port *port; +}; + +static struct usbcons_info usbcons_info; +static struct console usbcons; + +/* + * ------------------------------------------------------------ + * USB Serial console driver + * + * Much of the code here is copied from drivers/char/serial.c + * and implements a phony serial console in the same way that + * serial.c does so that in case some software queries it, + * it will get the same results. + * + * Things that are different from the way the serial port code + * does things, is that we call the lower level usb-serial + * driver code to initialize the device, and we set the initial + * console speeds based on the command line arguments. + * ------------------------------------------------------------ + */ + +static const struct tty_operations usb_console_fake_tty_ops = { +}; + +/* + * The parsing of the command line works exactly like the + * serial.c code, except that the specifier is "ttyUSB" instead + * of "ttyS". + */ +static int usb_console_setup(struct console *co, char *options) +{ + struct usbcons_info *info = &usbcons_info; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int doflow = 0; + int cflag = CREAD | HUPCL | CLOCAL; + char *s; + struct usb_serial *serial; + struct usb_serial_port *port; + int retval; + struct tty_struct *tty = NULL; + struct ktermios dummy; + + if (options) { + baud = simple_strtoul(options, NULL, 10); + s = options; + while (*s >= '0' && *s <= '9') + s++; + if (*s) + parity = *s++; + if (*s) + bits = *s++ - '0'; + if (*s) + doflow = (*s++ == 'r'); + } + + /* Sane default */ + if (baud == 0) + baud = 9600; + + switch (bits) { + case 7: + cflag |= CS7; + break; + default: + case 8: + cflag |= CS8; + break; + } + switch (parity) { + case 'o': case 'O': + cflag |= PARODD; + break; + case 'e': case 'E': + cflag |= PARENB; + break; + } + co->cflag = cflag; + + /* + * no need to check the index here: if the index is wrong, console + * code won't call us + */ + port = usb_serial_port_get_by_minor(co->index); + if (port == NULL) { + /* no device is connected yet, sorry :( */ + pr_err("No USB device connected to ttyUSB%i\n", co->index); + return -ENODEV; + } + serial = port->serial; + + retval = usb_autopm_get_interface(serial->interface); + if (retval) + goto error_get_interface; + + tty_port_tty_set(&port->port, NULL); + + info->port = port; + + ++port->port.count; + if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) { + if (serial->type->set_termios) { + /* + * allocate a fake tty so the driver can initialize + * the termios structure, then later call set_termios to + * configure according to command line arguments + */ + tty = kzalloc(sizeof(*tty), GFP_KERNEL); + if (!tty) { + retval = -ENOMEM; + goto reset_open_count; + } + kref_init(&tty->kref); + tty->driver = usb_serial_tty_driver; + tty->index = co->index; + init_ldsem(&tty->ldisc_sem); + INIT_LIST_HEAD(&tty->tty_files); + kref_get(&tty->driver->kref); + __module_get(tty->driver->owner); + tty->ops = &usb_console_fake_tty_ops; + if (tty_init_termios(tty)) { + retval = -ENOMEM; + goto put_tty; + } + tty_port_tty_set(&port->port, tty); + } + + /* only call the device specific open if this + * is the first time the port is opened */ + retval = serial->type->open(NULL, port); + if (retval) { + dev_err(&port->dev, "could not open USB console port\n"); + goto fail; + } + + if (serial->type->set_termios) { + tty->termios.c_cflag = cflag; + tty_termios_encode_baud_rate(&tty->termios, baud, baud); + memset(&dummy, 0, sizeof(struct ktermios)); + serial->type->set_termios(tty, port, &dummy); + + tty_port_tty_set(&port->port, NULL); + tty_kref_put(tty); + } + set_bit(ASYNCB_INITIALIZED, &port->port.flags); + } + /* Now that any required fake tty operations are completed restore + * the tty port count */ + --port->port.count; + /* The console is special in terms of closing the device so + * indicate this port is now acting as a system console. */ + port->port.console = 1; + + mutex_unlock(&serial->disc_mutex); + return retval; + + fail: + tty_port_tty_set(&port->port, NULL); + put_tty: + tty_kref_put(tty); + reset_open_count: + port->port.count = 0; + usb_autopm_put_interface(serial->interface); + error_get_interface: + usb_serial_put(serial); + mutex_unlock(&serial->disc_mutex); + return retval; +} + +static void usb_console_write(struct console *co, + const char *buf, unsigned count) +{ + static struct usbcons_info *info = &usbcons_info; + struct usb_serial_port *port = info->port; + struct usb_serial *serial; + int retval = -ENODEV; + + if (!port || port->serial->dev->state == USB_STATE_NOTATTACHED) + return; + serial = port->serial; + + if (count == 0) + return; + + dev_dbg(&port->dev, "%s - %d byte(s)\n", __func__, count); + + if (!port->port.console) { + dev_dbg(&port->dev, "%s - port not opened\n", __func__); + return; + } + + while (count) { + unsigned int i; + unsigned int lf; + /* search for LF so we can insert CR if necessary */ + for (i = 0, lf = 0 ; i < count ; i++) { + if (*(buf + i) == 10) { + lf = 1; + i++; + break; + } + } + /* pass on to the driver specific version of this function if + it is available */ + retval = serial->type->write(NULL, port, buf, i); + dev_dbg(&port->dev, "%s - write: %d\n", __func__, retval); + if (lf) { + /* append CR after LF */ + unsigned char cr = 13; + retval = serial->type->write(NULL, port, &cr, 1); + dev_dbg(&port->dev, "%s - write cr: %d\n", + __func__, retval); + } + buf += i; + count -= i; + } +} + +static struct tty_driver *usb_console_device(struct console *co, int *index) +{ + struct tty_driver **p = (struct tty_driver **)co->data; + + if (!*p) + return NULL; + + *index = co->index; + return *p; +} + +static struct console usbcons = { + .name = "ttyUSB", + .write = usb_console_write, + .device = usb_console_device, + .setup = usb_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &usb_serial_tty_driver, +}; + +void usb_serial_console_disconnect(struct usb_serial *serial) +{ + if (serial && serial->port && serial->port[0] + && serial->port[0] == usbcons_info.port) { + usb_serial_console_exit(); + usb_serial_put(serial); + } +} + +void usb_serial_console_init(int minor) +{ + if (minor == 0) { + /* + * Call register_console() if this is the first device plugged + * in. If we call it earlier, then the callback to + * console_setup() will fail, as there is not a device seen by + * the USB subsystem yet. + */ + /* + * Register console. + * NOTES: + * console_setup() is called (back) immediately (from + * register_console). console_write() is called immediately + * from register_console iff CON_PRINTBUFFER is set in flags. + */ + pr_debug("registering the USB serial console.\n"); + register_console(&usbcons); + } +} + +void usb_serial_console_exit(void) +{ + if (usbcons_info.port) { + unregister_console(&usbcons); + usbcons_info.port->port.console = 0; + usbcons_info.port = NULL; + } +} + diff --git a/kernel/drivers/usb/serial/cp210x.c b/kernel/drivers/usb/serial/cp210x.c new file mode 100644 index 000000000..ffd739e31 --- /dev/null +++ b/kernel/drivers/usb/serial/cp210x.c @@ -0,0 +1,893 @@ +/* + * Silicon Laboratories CP210x USB to RS232 serial adaptor driver + * + * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * Support to set flow control line levels using TIOCMGET and TIOCMSET + * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow + * control thanks to Munir Nassar nassarmu@real-time.com + * + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/usb.h> +#include <linux/uaccess.h> +#include <linux/usb/serial.h> + +#define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver" + +/* + * Function Prototypes + */ +static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *); +static void cp210x_close(struct usb_serial_port *); +static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *); +static void cp210x_get_termios_port(struct usb_serial_port *port, + unsigned int *cflagp, unsigned int *baudp); +static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *, + struct ktermios *); +static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *, + struct ktermios*); +static int cp210x_tiocmget(struct tty_struct *); +static int cp210x_tiocmset(struct tty_struct *, unsigned int, unsigned int); +static int cp210x_tiocmset_port(struct usb_serial_port *port, + unsigned int, unsigned int); +static void cp210x_break_ctl(struct tty_struct *, int); +static int cp210x_startup(struct usb_serial *); +static void cp210x_release(struct usb_serial *); +static void cp210x_dtr_rts(struct usb_serial_port *p, int on); + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(0x045B, 0x0053) }, /* Renesas RX610 RX-Stick */ + { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */ + { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ + { USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ + { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */ + { USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */ + { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */ + { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */ + { USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */ + { USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */ + { USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */ + { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */ + { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */ + { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */ + { USB_DEVICE(0x0FDE, 0xCA05) }, /* OWL Wireless Electricity Monitor CM-160 */ + { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */ + { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */ + { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */ + { USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */ + { USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */ + { USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */ + { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */ + { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */ + { USB_DEVICE(0x10C4, 0x8044) }, /* Cygnal Debug Adapter */ + { USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */ + { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */ + { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */ + { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */ + { USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */ + { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */ + { USB_DEVICE(0x10C4, 0x80C4) }, /* Cygnal Integrated Products, Inc., Optris infrared thermometer */ + { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */ + { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */ + { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */ + { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */ + { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */ + { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */ + { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */ + { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */ + { USB_DEVICE(0x2405, 0x0003) }, /* West Mountain Radio RIGblaster Advantage */ + { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */ + { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ + { USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */ + { USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */ + { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */ + { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */ + { USB_DEVICE(0x10C4, 0x81A9) }, /* Multiplex RC Interface */ + { USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */ + { USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */ + { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */ + { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ + { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ + { USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */ + { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */ + { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ + { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */ + { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */ + { USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */ + { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */ + { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */ + { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ + { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */ + { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ + { USB_DEVICE(0x10C4, 0x83D8) }, /* DekTec DTA Plus VHF/UHF Booster/Attenuator */ + { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */ + { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */ + { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */ + { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */ + { USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */ + { USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */ + { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */ + { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */ + { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */ + { USB_DEVICE(0x10C4, 0x8856) }, /* CEL EM357 ZigBee USB Stick - LR */ + { USB_DEVICE(0x10C4, 0x8857) }, /* CEL EM357 ZigBee USB Stick */ + { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */ + { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */ + { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */ + { USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */ + { USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */ + { USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */ + { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ + { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ + { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */ + { USB_DEVICE(0x10C4, 0xEA80) }, /* Silicon Labs factory default */ + { USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */ + { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */ + { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */ + { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */ + { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */ + { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */ + { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */ + { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */ + { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */ + { USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */ + { USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */ + { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */ + { USB_DEVICE(0x166A, 0x0304) }, /* Clipsal 5000CT2 C-Bus Black and White Touchscreen */ + { USB_DEVICE(0x166A, 0x0305) }, /* Clipsal C-5000CT2 C-Bus Spectrum Colour Touchscreen */ + { USB_DEVICE(0x166A, 0x0401) }, /* Clipsal L51xx C-Bus Architectural Dimmer */ + { USB_DEVICE(0x166A, 0x0101) }, /* Clipsal 5560884 C-Bus Multi-room Audio Matrix Switcher */ + { USB_DEVICE(0x16C0, 0x09B0) }, /* Lunatico Seletek */ + { USB_DEVICE(0x16C0, 0x09B1) }, /* Lunatico Seletek */ + { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ + { USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */ + { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */ + { USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */ + { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */ + { USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */ + { USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */ + { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */ + { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ + { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ + { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */ + { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */ + { USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */ + { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */ + { USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */ + { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */ + { USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */ + { USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */ + { USB_DEVICE(0x1FB9, 0x0200) }, /* Lake Shore Model 218A Temperature Monitor */ + { USB_DEVICE(0x1FB9, 0x0201) }, /* Lake Shore Model 219 Temperature Monitor */ + { USB_DEVICE(0x1FB9, 0x0202) }, /* Lake Shore Model 233 Temperature Transmitter */ + { USB_DEVICE(0x1FB9, 0x0203) }, /* Lake Shore Model 235 Temperature Transmitter */ + { USB_DEVICE(0x1FB9, 0x0300) }, /* Lake Shore Model 335 Temperature Controller */ + { USB_DEVICE(0x1FB9, 0x0301) }, /* Lake Shore Model 336 Temperature Controller */ + { USB_DEVICE(0x1FB9, 0x0302) }, /* Lake Shore Model 350 Temperature Controller */ + { USB_DEVICE(0x1FB9, 0x0303) }, /* Lake Shore Model 371 AC Bridge */ + { USB_DEVICE(0x1FB9, 0x0400) }, /* Lake Shore Model 411 Handheld Gaussmeter */ + { USB_DEVICE(0x1FB9, 0x0401) }, /* Lake Shore Model 425 Gaussmeter */ + { USB_DEVICE(0x1FB9, 0x0402) }, /* Lake Shore Model 455A Gaussmeter */ + { USB_DEVICE(0x1FB9, 0x0403) }, /* Lake Shore Model 475A Gaussmeter */ + { USB_DEVICE(0x1FB9, 0x0404) }, /* Lake Shore Model 465 Three Axis Gaussmeter */ + { USB_DEVICE(0x1FB9, 0x0600) }, /* Lake Shore Model 625A Superconducting MPS */ + { USB_DEVICE(0x1FB9, 0x0601) }, /* Lake Shore Model 642A Magnet Power Supply */ + { USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */ + { USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */ + { USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */ + { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */ + { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */ + { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */ + { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */ + { } /* Terminating Entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table); + +struct cp210x_serial_private { + __u8 bInterfaceNumber; +}; + +static struct usb_serial_driver cp210x_device = { + .driver = { + .owner = THIS_MODULE, + .name = "cp210x", + }, + .id_table = id_table, + .num_ports = 1, + .bulk_in_size = 256, + .bulk_out_size = 256, + .open = cp210x_open, + .close = cp210x_close, + .break_ctl = cp210x_break_ctl, + .set_termios = cp210x_set_termios, + .tiocmget = cp210x_tiocmget, + .tiocmset = cp210x_tiocmset, + .attach = cp210x_startup, + .release = cp210x_release, + .dtr_rts = cp210x_dtr_rts +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &cp210x_device, NULL +}; + +/* Config request types */ +#define REQTYPE_HOST_TO_INTERFACE 0x41 +#define REQTYPE_INTERFACE_TO_HOST 0xc1 +#define REQTYPE_HOST_TO_DEVICE 0x40 +#define REQTYPE_DEVICE_TO_HOST 0xc0 + +/* Config request codes */ +#define CP210X_IFC_ENABLE 0x00 +#define CP210X_SET_BAUDDIV 0x01 +#define CP210X_GET_BAUDDIV 0x02 +#define CP210X_SET_LINE_CTL 0x03 +#define CP210X_GET_LINE_CTL 0x04 +#define CP210X_SET_BREAK 0x05 +#define CP210X_IMM_CHAR 0x06 +#define CP210X_SET_MHS 0x07 +#define CP210X_GET_MDMSTS 0x08 +#define CP210X_SET_XON 0x09 +#define CP210X_SET_XOFF 0x0A +#define CP210X_SET_EVENTMASK 0x0B +#define CP210X_GET_EVENTMASK 0x0C +#define CP210X_SET_CHAR 0x0D +#define CP210X_GET_CHARS 0x0E +#define CP210X_GET_PROPS 0x0F +#define CP210X_GET_COMM_STATUS 0x10 +#define CP210X_RESET 0x11 +#define CP210X_PURGE 0x12 +#define CP210X_SET_FLOW 0x13 +#define CP210X_GET_FLOW 0x14 +#define CP210X_EMBED_EVENTS 0x15 +#define CP210X_GET_EVENTSTATE 0x16 +#define CP210X_SET_CHARS 0x19 +#define CP210X_GET_BAUDRATE 0x1D +#define CP210X_SET_BAUDRATE 0x1E + +/* CP210X_IFC_ENABLE */ +#define UART_ENABLE 0x0001 +#define UART_DISABLE 0x0000 + +/* CP210X_(SET|GET)_BAUDDIV */ +#define BAUD_RATE_GEN_FREQ 0x384000 + +/* CP210X_(SET|GET)_LINE_CTL */ +#define BITS_DATA_MASK 0X0f00 +#define BITS_DATA_5 0X0500 +#define BITS_DATA_6 0X0600 +#define BITS_DATA_7 0X0700 +#define BITS_DATA_8 0X0800 +#define BITS_DATA_9 0X0900 + +#define BITS_PARITY_MASK 0x00f0 +#define BITS_PARITY_NONE 0x0000 +#define BITS_PARITY_ODD 0x0010 +#define BITS_PARITY_EVEN 0x0020 +#define BITS_PARITY_MARK 0x0030 +#define BITS_PARITY_SPACE 0x0040 + +#define BITS_STOP_MASK 0x000f +#define BITS_STOP_1 0x0000 +#define BITS_STOP_1_5 0x0001 +#define BITS_STOP_2 0x0002 + +/* CP210X_SET_BREAK */ +#define BREAK_ON 0x0001 +#define BREAK_OFF 0x0000 + +/* CP210X_(SET_MHS|GET_MDMSTS) */ +#define CONTROL_DTR 0x0001 +#define CONTROL_RTS 0x0002 +#define CONTROL_CTS 0x0010 +#define CONTROL_DSR 0x0020 +#define CONTROL_RING 0x0040 +#define CONTROL_DCD 0x0080 +#define CONTROL_WRITE_DTR 0x0100 +#define CONTROL_WRITE_RTS 0x0200 + +/* + * cp210x_get_config + * Reads from the CP210x configuration registers + * 'size' is specified in bytes. + * 'data' is a pointer to a pre-allocated array of integers large + * enough to hold 'size' bytes (with 4 bytes to each integer) + */ +static int cp210x_get_config(struct usb_serial_port *port, u8 request, + unsigned int *data, int size) +{ + struct usb_serial *serial = port->serial; + struct cp210x_serial_private *spriv = usb_get_serial_data(serial); + __le32 *buf; + int result, i, length; + + /* Number of integers required to contain the array */ + length = (((size - 1) | 3) + 1) / 4; + + buf = kcalloc(length, sizeof(__le32), GFP_KERNEL); + if (!buf) + return -ENOMEM; + + /* Issue the request, attempting to read 'size' bytes */ + result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + request, REQTYPE_INTERFACE_TO_HOST, 0x0000, + spriv->bInterfaceNumber, buf, size, + USB_CTRL_GET_TIMEOUT); + + /* Convert data into an array of integers */ + for (i = 0; i < length; i++) + data[i] = le32_to_cpu(buf[i]); + + kfree(buf); + + if (result != size) { + dev_dbg(&port->dev, "%s - Unable to send config request, request=0x%x size=%d result=%d\n", + __func__, request, size, result); + if (result > 0) + result = -EPROTO; + + return result; + } + + return 0; +} + +/* + * cp210x_set_config + * Writes to the CP210x configuration registers + * Values less than 16 bits wide are sent directly + * 'size' is specified in bytes. + */ +static int cp210x_set_config(struct usb_serial_port *port, u8 request, + unsigned int *data, int size) +{ + struct usb_serial *serial = port->serial; + struct cp210x_serial_private *spriv = usb_get_serial_data(serial); + __le32 *buf; + int result, i, length; + + /* Number of integers required to contain the array */ + length = (((size - 1) | 3) + 1) / 4; + + buf = kmalloc(length * sizeof(__le32), GFP_KERNEL); + if (!buf) + return -ENOMEM; + + /* Array of integers into bytes */ + for (i = 0; i < length; i++) + buf[i] = cpu_to_le32(data[i]); + + if (size > 2) { + result = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), + request, REQTYPE_HOST_TO_INTERFACE, 0x0000, + spriv->bInterfaceNumber, buf, size, + USB_CTRL_SET_TIMEOUT); + } else { + result = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), + request, REQTYPE_HOST_TO_INTERFACE, data[0], + spriv->bInterfaceNumber, NULL, 0, + USB_CTRL_SET_TIMEOUT); + } + + kfree(buf); + + if ((size > 2 && result != size) || result < 0) { + dev_dbg(&port->dev, "%s - Unable to send request, request=0x%x size=%d result=%d\n", + __func__, request, size, result); + if (result > 0) + result = -EPROTO; + + return result; + } + + return 0; +} + +/* + * cp210x_set_config_single + * Convenience function for calling cp210x_set_config on single data values + * without requiring an integer pointer + */ +static inline int cp210x_set_config_single(struct usb_serial_port *port, + u8 request, unsigned int data) +{ + return cp210x_set_config(port, request, &data, 2); +} + +/* + * cp210x_quantise_baudrate + * Quantises the baud rate as per AN205 Table 1 + */ +static unsigned int cp210x_quantise_baudrate(unsigned int baud) +{ + if (baud <= 300) + baud = 300; + else if (baud <= 600) baud = 600; + else if (baud <= 1200) baud = 1200; + else if (baud <= 1800) baud = 1800; + else if (baud <= 2400) baud = 2400; + else if (baud <= 4000) baud = 4000; + else if (baud <= 4803) baud = 4800; + else if (baud <= 7207) baud = 7200; + else if (baud <= 9612) baud = 9600; + else if (baud <= 14428) baud = 14400; + else if (baud <= 16062) baud = 16000; + else if (baud <= 19250) baud = 19200; + else if (baud <= 28912) baud = 28800; + else if (baud <= 38601) baud = 38400; + else if (baud <= 51558) baud = 51200; + else if (baud <= 56280) baud = 56000; + else if (baud <= 58053) baud = 57600; + else if (baud <= 64111) baud = 64000; + else if (baud <= 77608) baud = 76800; + else if (baud <= 117028) baud = 115200; + else if (baud <= 129347) baud = 128000; + else if (baud <= 156868) baud = 153600; + else if (baud <= 237832) baud = 230400; + else if (baud <= 254234) baud = 250000; + else if (baud <= 273066) baud = 256000; + else if (baud <= 491520) baud = 460800; + else if (baud <= 567138) baud = 500000; + else if (baud <= 670254) baud = 576000; + else if (baud < 1000000) + baud = 921600; + else if (baud > 2000000) + baud = 2000000; + return baud; +} + +static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + int result; + + result = cp210x_set_config_single(port, CP210X_IFC_ENABLE, + UART_ENABLE); + if (result) { + dev_err(&port->dev, "%s - Unable to enable UART\n", __func__); + return result; + } + + /* Configure the termios structure */ + cp210x_get_termios(tty, port); + + /* The baud rate must be initialised on cp2104 */ + if (tty) + cp210x_change_speed(tty, port, NULL); + + return usb_serial_generic_open(tty, port); +} + +static void cp210x_close(struct usb_serial_port *port) +{ + usb_serial_generic_close(port); + cp210x_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE); +} + +/* + * cp210x_get_termios + * Reads the baud rate, data bits, parity, stop bits and flow control mode + * from the device, corrects any unsupported values, and configures the + * termios structure to reflect the state of the device + */ +static void cp210x_get_termios(struct tty_struct *tty, + struct usb_serial_port *port) +{ + unsigned int baud; + + if (tty) { + cp210x_get_termios_port(tty->driver_data, + &tty->termios.c_cflag, &baud); + tty_encode_baud_rate(tty, baud, baud); + } else { + unsigned int cflag; + cflag = 0; + cp210x_get_termios_port(port, &cflag, &baud); + } +} + +/* + * cp210x_get_termios_port + * This is the heart of cp210x_get_termios which always uses a &usb_serial_port. + */ +static void cp210x_get_termios_port(struct usb_serial_port *port, + unsigned int *cflagp, unsigned int *baudp) +{ + struct device *dev = &port->dev; + unsigned int cflag, modem_ctl[4]; + unsigned int baud; + unsigned int bits; + + cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4); + + dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud); + *baudp = baud; + + cflag = *cflagp; + + cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); + cflag &= ~CSIZE; + switch (bits & BITS_DATA_MASK) { + case BITS_DATA_5: + dev_dbg(dev, "%s - data bits = 5\n", __func__); + cflag |= CS5; + break; + case BITS_DATA_6: + dev_dbg(dev, "%s - data bits = 6\n", __func__); + cflag |= CS6; + break; + case BITS_DATA_7: + dev_dbg(dev, "%s - data bits = 7\n", __func__); + cflag |= CS7; + break; + case BITS_DATA_8: + dev_dbg(dev, "%s - data bits = 8\n", __func__); + cflag |= CS8; + break; + case BITS_DATA_9: + dev_dbg(dev, "%s - data bits = 9 (not supported, using 8 data bits)\n", __func__); + cflag |= CS8; + bits &= ~BITS_DATA_MASK; + bits |= BITS_DATA_8; + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + break; + default: + dev_dbg(dev, "%s - Unknown number of data bits, using 8\n", __func__); + cflag |= CS8; + bits &= ~BITS_DATA_MASK; + bits |= BITS_DATA_8; + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + break; + } + + switch (bits & BITS_PARITY_MASK) { + case BITS_PARITY_NONE: + dev_dbg(dev, "%s - parity = NONE\n", __func__); + cflag &= ~PARENB; + break; + case BITS_PARITY_ODD: + dev_dbg(dev, "%s - parity = ODD\n", __func__); + cflag |= (PARENB|PARODD); + break; + case BITS_PARITY_EVEN: + dev_dbg(dev, "%s - parity = EVEN\n", __func__); + cflag &= ~PARODD; + cflag |= PARENB; + break; + case BITS_PARITY_MARK: + dev_dbg(dev, "%s - parity = MARK\n", __func__); + cflag |= (PARENB|PARODD|CMSPAR); + break; + case BITS_PARITY_SPACE: + dev_dbg(dev, "%s - parity = SPACE\n", __func__); + cflag &= ~PARODD; + cflag |= (PARENB|CMSPAR); + break; + default: + dev_dbg(dev, "%s - Unknown parity mode, disabling parity\n", __func__); + cflag &= ~PARENB; + bits &= ~BITS_PARITY_MASK; + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + break; + } + + cflag &= ~CSTOPB; + switch (bits & BITS_STOP_MASK) { + case BITS_STOP_1: + dev_dbg(dev, "%s - stop bits = 1\n", __func__); + break; + case BITS_STOP_1_5: + dev_dbg(dev, "%s - stop bits = 1.5 (not supported, using 1 stop bit)\n", __func__); + bits &= ~BITS_STOP_MASK; + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + break; + case BITS_STOP_2: + dev_dbg(dev, "%s - stop bits = 2\n", __func__); + cflag |= CSTOPB; + break; + default: + dev_dbg(dev, "%s - Unknown number of stop bits, using 1 stop bit\n", __func__); + bits &= ~BITS_STOP_MASK; + cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); + break; + } + + cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); + if (modem_ctl[0] & 0x0008) { + dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__); + cflag |= CRTSCTS; + } else { + dev_dbg(dev, "%s - flow control = NONE\n", __func__); + cflag &= ~CRTSCTS; + } + + *cflagp = cflag; +} + +/* + * CP2101 supports the following baud rates: + * + * 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200, 28800, + * 38400, 56000, 57600, 115200, 128000, 230400, 460800, 921600 + * + * CP2102 and CP2103 support the following additional rates: + * + * 4000, 16000, 51200, 64000, 76800, 153600, 250000, 256000, 500000, + * 576000 + * + * The device will map a requested rate to a supported one, but the result + * of requests for rates greater than 1053257 is undefined (see AN205). + * + * CP2104, CP2105 and CP2110 support most rates up to 2M, 921k and 1M baud, + * respectively, with an error less than 1%. The actual rates are determined + * by + * + * div = round(freq / (2 x prescale x request)) + * actual = freq / (2 x prescale x div) + * + * For CP2104 and CP2105 freq is 48Mhz and prescale is 4 for request <= 365bps + * or 1 otherwise. + * For CP2110 freq is 24Mhz and prescale is 4 for request <= 300bps or 1 + * otherwise. + */ +static void cp210x_change_speed(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + u32 baud; + + baud = tty->termios.c_ospeed; + + /* This maps the requested rate to a rate valid on cp2102 or cp2103, + * or to an arbitrary rate in [1M,2M]. + * + * NOTE: B0 is not implemented. + */ + baud = cp210x_quantise_baudrate(baud); + + dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud); + if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud, + sizeof(baud))) { + dev_warn(&port->dev, "failed to set baud rate to %u\n", baud); + if (old_termios) + baud = old_termios->c_ospeed; + else + baud = 9600; + } + + tty_encode_baud_rate(tty, baud, baud); +} + +static void cp210x_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + struct device *dev = &port->dev; + unsigned int cflag, old_cflag; + unsigned int bits; + unsigned int modem_ctl[4]; + + cflag = tty->termios.c_cflag; + old_cflag = old_termios->c_cflag; + + if (tty->termios.c_ospeed != old_termios->c_ospeed) + cp210x_change_speed(tty, port, old_termios); + + /* If the number of data bits is to be updated */ + if ((cflag & CSIZE) != (old_cflag & CSIZE)) { + cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); + bits &= ~BITS_DATA_MASK; + switch (cflag & CSIZE) { + case CS5: + bits |= BITS_DATA_5; + dev_dbg(dev, "%s - data bits = 5\n", __func__); + break; + case CS6: + bits |= BITS_DATA_6; + dev_dbg(dev, "%s - data bits = 6\n", __func__); + break; + case CS7: + bits |= BITS_DATA_7; + dev_dbg(dev, "%s - data bits = 7\n", __func__); + break; + case CS8: + bits |= BITS_DATA_8; + dev_dbg(dev, "%s - data bits = 8\n", __func__); + break; + /*case CS9: + bits |= BITS_DATA_9; + dev_dbg(dev, "%s - data bits = 9\n", __func__); + break;*/ + default: + dev_dbg(dev, "cp210x driver does not support the number of bits requested, using 8 bit mode\n"); + bits |= BITS_DATA_8; + break; + } + if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) + dev_dbg(dev, "Number of data bits requested not supported by device\n"); + } + + if ((cflag & (PARENB|PARODD|CMSPAR)) != + (old_cflag & (PARENB|PARODD|CMSPAR))) { + cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); + bits &= ~BITS_PARITY_MASK; + if (cflag & PARENB) { + if (cflag & CMSPAR) { + if (cflag & PARODD) { + bits |= BITS_PARITY_MARK; + dev_dbg(dev, "%s - parity = MARK\n", __func__); + } else { + bits |= BITS_PARITY_SPACE; + dev_dbg(dev, "%s - parity = SPACE\n", __func__); + } + } else { + if (cflag & PARODD) { + bits |= BITS_PARITY_ODD; + dev_dbg(dev, "%s - parity = ODD\n", __func__); + } else { + bits |= BITS_PARITY_EVEN; + dev_dbg(dev, "%s - parity = EVEN\n", __func__); + } + } + } + if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) + dev_dbg(dev, "Parity mode not supported by device\n"); + } + + if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { + cp210x_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); + bits &= ~BITS_STOP_MASK; + if (cflag & CSTOPB) { + bits |= BITS_STOP_2; + dev_dbg(dev, "%s - stop bits = 2\n", __func__); + } else { + bits |= BITS_STOP_1; + dev_dbg(dev, "%s - stop bits = 1\n", __func__); + } + if (cp210x_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) + dev_dbg(dev, "Number of stop bits requested not supported by device\n"); + } + + if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { + cp210x_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); + dev_dbg(dev, "%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x\n", + __func__, modem_ctl[0], modem_ctl[1], + modem_ctl[2], modem_ctl[3]); + + if (cflag & CRTSCTS) { + modem_ctl[0] &= ~0x7B; + modem_ctl[0] |= 0x09; + modem_ctl[1] = 0x80; + dev_dbg(dev, "%s - flow control = CRTSCTS\n", __func__); + } else { + modem_ctl[0] &= ~0x7B; + modem_ctl[0] |= 0x01; + modem_ctl[1] |= 0x40; + dev_dbg(dev, "%s - flow control = NONE\n", __func__); + } + + dev_dbg(dev, "%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x\n", + __func__, modem_ctl[0], modem_ctl[1], + modem_ctl[2], modem_ctl[3]); + cp210x_set_config(port, CP210X_SET_FLOW, modem_ctl, 16); + } + +} + +static int cp210x_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + return cp210x_tiocmset_port(port, set, clear); +} + +static int cp210x_tiocmset_port(struct usb_serial_port *port, + unsigned int set, unsigned int clear) +{ + unsigned int control = 0; + + if (set & TIOCM_RTS) { + control |= CONTROL_RTS; + control |= CONTROL_WRITE_RTS; + } + if (set & TIOCM_DTR) { + control |= CONTROL_DTR; + control |= CONTROL_WRITE_DTR; + } + if (clear & TIOCM_RTS) { + control &= ~CONTROL_RTS; + control |= CONTROL_WRITE_RTS; + } + if (clear & TIOCM_DTR) { + control &= ~CONTROL_DTR; + control |= CONTROL_WRITE_DTR; + } + + dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control); + + return cp210x_set_config(port, CP210X_SET_MHS, &control, 2); +} + +static void cp210x_dtr_rts(struct usb_serial_port *p, int on) +{ + if (on) + cp210x_tiocmset_port(p, TIOCM_DTR|TIOCM_RTS, 0); + else + cp210x_tiocmset_port(p, 0, TIOCM_DTR|TIOCM_RTS); +} + +static int cp210x_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned int control; + int result; + + cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1); + + result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) + |((control & CONTROL_RTS) ? TIOCM_RTS : 0) + |((control & CONTROL_CTS) ? TIOCM_CTS : 0) + |((control & CONTROL_DSR) ? TIOCM_DSR : 0) + |((control & CONTROL_RING)? TIOCM_RI : 0) + |((control & CONTROL_DCD) ? TIOCM_CD : 0); + + dev_dbg(&port->dev, "%s - control = 0x%.2x\n", __func__, control); + + return result; +} + +static void cp210x_break_ctl(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned int state; + + if (break_state == 0) + state = BREAK_OFF; + else + state = BREAK_ON; + dev_dbg(&port->dev, "%s - turning break %s\n", __func__, + state == BREAK_OFF ? "off" : "on"); + cp210x_set_config(port, CP210X_SET_BREAK, &state, 2); +} + +static int cp210x_startup(struct usb_serial *serial) +{ + struct usb_host_interface *cur_altsetting; + struct cp210x_serial_private *spriv; + + spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); + if (!spriv) + return -ENOMEM; + + cur_altsetting = serial->interface->cur_altsetting; + spriv->bInterfaceNumber = cur_altsetting->desc.bInterfaceNumber; + + usb_set_serial_data(serial, spriv); + + return 0; +} + +static void cp210x_release(struct usb_serial *serial) +{ + struct cp210x_serial_private *spriv; + + spriv = usb_get_serial_data(serial); + kfree(spriv); +} + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/cyberjack.c b/kernel/drivers/usb/serial/cyberjack.c new file mode 100644 index 000000000..2916dea3e --- /dev/null +++ b/kernel/drivers/usb/serial/cyberjack.c @@ -0,0 +1,421 @@ +/* + * REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver + * + * Copyright (C) 2001 REINER SCT + * Author: Matthias Bruestle + * + * Contact: support@reiner-sct.com (see MAINTAINERS) + * + * This program is largely derived from work by the linux-usb group + * and associated source files. Please see the usb/serial files for + * individual credits and copyrights. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Thanks to Greg Kroah-Hartman (greg@kroah.com) for his help and + * patience. + * + * In case of problems, please write to the contact e-mail address + * mentioned above. + * + * Please note that later models of the cyberjack reader family are + * supported by a libusb-based userspace device driver. + * + * Homepage: http://www.reiner-sct.de/support/treiber_cyberjack.php#linux + */ + + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +#define CYBERJACK_LOCAL_BUF_SIZE 32 + +#define DRIVER_AUTHOR "Matthias Bruestle" +#define DRIVER_DESC "REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver" + + +#define CYBERJACK_VENDOR_ID 0x0C4B +#define CYBERJACK_PRODUCT_ID 0x0100 + +/* Function prototypes */ +static int cyberjack_port_probe(struct usb_serial_port *port); +static int cyberjack_port_remove(struct usb_serial_port *port); +static int cyberjack_open(struct tty_struct *tty, + struct usb_serial_port *port); +static void cyberjack_close(struct usb_serial_port *port); +static int cyberjack_write(struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count); +static int cyberjack_write_room(struct tty_struct *tty); +static void cyberjack_read_int_callback(struct urb *urb); +static void cyberjack_read_bulk_callback(struct urb *urb); +static void cyberjack_write_bulk_callback(struct urb *urb); + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(CYBERJACK_VENDOR_ID, CYBERJACK_PRODUCT_ID) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_serial_driver cyberjack_device = { + .driver = { + .owner = THIS_MODULE, + .name = "cyberjack", + }, + .description = "Reiner SCT Cyberjack USB card reader", + .id_table = id_table, + .num_ports = 1, + .port_probe = cyberjack_port_probe, + .port_remove = cyberjack_port_remove, + .open = cyberjack_open, + .close = cyberjack_close, + .write = cyberjack_write, + .write_room = cyberjack_write_room, + .read_int_callback = cyberjack_read_int_callback, + .read_bulk_callback = cyberjack_read_bulk_callback, + .write_bulk_callback = cyberjack_write_bulk_callback, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &cyberjack_device, NULL +}; + +struct cyberjack_private { + spinlock_t lock; /* Lock for SMP */ + short rdtodo; /* Bytes still to read */ + unsigned char wrbuf[5*64]; /* Buffer for collecting data to write */ + short wrfilled; /* Overall data size we already got */ + short wrsent; /* Data already sent */ +}; + +static int cyberjack_port_probe(struct usb_serial_port *port) +{ + struct cyberjack_private *priv; + int result; + + priv = kmalloc(sizeof(struct cyberjack_private), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + priv->rdtodo = 0; + priv->wrfilled = 0; + priv->wrsent = 0; + + usb_set_serial_port_data(port, priv); + + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result) + dev_err(&port->dev, "usb_submit_urb(read int) failed\n"); + + return 0; +} + +static int cyberjack_port_remove(struct usb_serial_port *port) +{ + struct cyberjack_private *priv; + + usb_kill_urb(port->interrupt_in_urb); + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} + +static int cyberjack_open(struct tty_struct *tty, + struct usb_serial_port *port) +{ + struct cyberjack_private *priv; + unsigned long flags; + int result = 0; + + dev_dbg(&port->dev, "%s - usb_clear_halt\n", __func__); + usb_clear_halt(port->serial->dev, port->write_urb->pipe); + + priv = usb_get_serial_port_data(port); + spin_lock_irqsave(&priv->lock, flags); + priv->rdtodo = 0; + priv->wrfilled = 0; + priv->wrsent = 0; + spin_unlock_irqrestore(&priv->lock, flags); + + return result; +} + +static void cyberjack_close(struct usb_serial_port *port) +{ + usb_kill_urb(port->write_urb); + usb_kill_urb(port->read_urb); +} + +static int cyberjack_write(struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count) +{ + struct device *dev = &port->dev; + struct cyberjack_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + int result; + int wrexpected; + + if (count == 0) { + dev_dbg(dev, "%s - write request of 0 bytes\n", __func__); + return 0; + } + + if (!test_and_clear_bit(0, &port->write_urbs_free)) { + dev_dbg(dev, "%s - already writing\n", __func__); + return 0; + } + + spin_lock_irqsave(&priv->lock, flags); + + if (count+priv->wrfilled > sizeof(priv->wrbuf)) { + /* To much data for buffer. Reset buffer. */ + priv->wrfilled = 0; + spin_unlock_irqrestore(&priv->lock, flags); + set_bit(0, &port->write_urbs_free); + return 0; + } + + /* Copy data */ + memcpy(priv->wrbuf + priv->wrfilled, buf, count); + + usb_serial_debug_data(dev, __func__, count, priv->wrbuf + priv->wrfilled); + priv->wrfilled += count; + + if (priv->wrfilled >= 3) { + wrexpected = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3; + dev_dbg(dev, "%s - expected data: %d\n", __func__, wrexpected); + } else + wrexpected = sizeof(priv->wrbuf); + + if (priv->wrfilled >= wrexpected) { + /* We have enough data to begin transmission */ + int length; + + dev_dbg(dev, "%s - transmitting data (frame 1)\n", __func__); + length = (wrexpected > port->bulk_out_size) ? + port->bulk_out_size : wrexpected; + + memcpy(port->write_urb->transfer_buffer, priv->wrbuf, length); + priv->wrsent = length; + + /* set up our urb */ + port->write_urb->transfer_buffer_length = length; + + /* send the data out the bulk port */ + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (result) { + dev_err(&port->dev, + "%s - failed submitting write urb, error %d\n", + __func__, result); + /* Throw away data. No better idea what to do with it. */ + priv->wrfilled = 0; + priv->wrsent = 0; + spin_unlock_irqrestore(&priv->lock, flags); + set_bit(0, &port->write_urbs_free); + return 0; + } + + dev_dbg(dev, "%s - priv->wrsent=%d\n", __func__, priv->wrsent); + dev_dbg(dev, "%s - priv->wrfilled=%d\n", __func__, priv->wrfilled); + + if (priv->wrsent >= priv->wrfilled) { + dev_dbg(dev, "%s - buffer cleaned\n", __func__); + memset(priv->wrbuf, 0, sizeof(priv->wrbuf)); + priv->wrfilled = 0; + priv->wrsent = 0; + } + } + + spin_unlock_irqrestore(&priv->lock, flags); + + return count; +} + +static int cyberjack_write_room(struct tty_struct *tty) +{ + /* FIXME: .... */ + return CYBERJACK_LOCAL_BUF_SIZE; +} + +static void cyberjack_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct cyberjack_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + int result; + + /* the urb might have been killed. */ + if (status) + return; + + usb_serial_debug_data(dev, __func__, urb->actual_length, data); + + /* React only to interrupts signaling a bulk_in transfer */ + if (urb->actual_length == 4 && data[0] == 0x01) { + short old_rdtodo; + + /* This is a announcement of coming bulk_ins. */ + unsigned short size = ((unsigned short)data[3]<<8)+data[2]+3; + + spin_lock(&priv->lock); + + old_rdtodo = priv->rdtodo; + + if (old_rdtodo > SHRT_MAX - size) { + dev_dbg(dev, "To many bulk_in urbs to do.\n"); + spin_unlock(&priv->lock); + goto resubmit; + } + + /* "+=" is probably more fault tolerant than "=" */ + priv->rdtodo += size; + + dev_dbg(dev, "%s - rdtodo: %d\n", __func__, priv->rdtodo); + + spin_unlock(&priv->lock); + + if (!old_rdtodo) { + result = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (result) + dev_err(dev, "%s - failed resubmitting read urb, error %d\n", + __func__, result); + dev_dbg(dev, "%s - usb_submit_urb(read urb)\n", __func__); + } + } + +resubmit: + result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); + if (result) + dev_err(&port->dev, "usb_submit_urb(read int) failed\n"); + dev_dbg(dev, "%s - usb_submit_urb(int urb)\n", __func__); +} + +static void cyberjack_read_bulk_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct cyberjack_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; + unsigned char *data = urb->transfer_buffer; + short todo; + int result; + int status = urb->status; + + usb_serial_debug_data(dev, __func__, urb->actual_length, data); + if (status) { + dev_dbg(dev, "%s - nonzero read bulk status received: %d\n", + __func__, status); + return; + } + + if (urb->actual_length) { + tty_insert_flip_string(&port->port, data, urb->actual_length); + tty_flip_buffer_push(&port->port); + } + + spin_lock(&priv->lock); + + /* Reduce urbs to do by one. */ + priv->rdtodo -= urb->actual_length; + /* Just to be sure */ + if (priv->rdtodo < 0) + priv->rdtodo = 0; + todo = priv->rdtodo; + + spin_unlock(&priv->lock); + + dev_dbg(dev, "%s - rdtodo: %d\n", __func__, todo); + + /* Continue to read if we have still urbs to do. */ + if (todo /* || (urb->actual_length==port->bulk_in_endpointAddress)*/) { + result = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (result) + dev_err(dev, "%s - failed resubmitting read urb, error %d\n", + __func__, result); + dev_dbg(dev, "%s - usb_submit_urb(read urb)\n", __func__); + } +} + +static void cyberjack_write_bulk_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct cyberjack_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; + int status = urb->status; + + set_bit(0, &port->write_urbs_free); + if (status) { + dev_dbg(dev, "%s - nonzero write bulk status received: %d\n", + __func__, status); + return; + } + + spin_lock(&priv->lock); + + /* only do something if we have more data to send */ + if (priv->wrfilled) { + int length, blksize, result; + + dev_dbg(dev, "%s - transmitting data (frame n)\n", __func__); + + length = ((priv->wrfilled - priv->wrsent) > port->bulk_out_size) ? + port->bulk_out_size : (priv->wrfilled - priv->wrsent); + + memcpy(port->write_urb->transfer_buffer, + priv->wrbuf + priv->wrsent, length); + priv->wrsent += length; + + /* set up our urb */ + port->write_urb->transfer_buffer_length = length; + + /* send the data out the bulk port */ + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (result) { + dev_err(dev, "%s - failed submitting write urb, error %d\n", + __func__, result); + /* Throw away data. No better idea what to do with it. */ + priv->wrfilled = 0; + priv->wrsent = 0; + goto exit; + } + + dev_dbg(dev, "%s - priv->wrsent=%d\n", __func__, priv->wrsent); + dev_dbg(dev, "%s - priv->wrfilled=%d\n", __func__, priv->wrfilled); + + blksize = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3; + + if (priv->wrsent >= priv->wrfilled || + priv->wrsent >= blksize) { + dev_dbg(dev, "%s - buffer cleaned\n", __func__); + memset(priv->wrbuf, 0, sizeof(priv->wrbuf)); + priv->wrfilled = 0; + priv->wrsent = 0; + } + } + +exit: + spin_unlock(&priv->lock); + usb_serial_port_softint(port); +} + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/cypress_m8.c b/kernel/drivers/usb/serial/cypress_m8.c new file mode 100644 index 000000000..01bf53392 --- /dev/null +++ b/kernel/drivers/usb/serial/cypress_m8.c @@ -0,0 +1,1267 @@ +/* + * USB Cypress M8 driver + * + * Copyright (C) 2004 + * Lonnie Mendez (dignome@gmail.com) + * Copyright (C) 2003,2004 + * Neil Whelchel (koyama@firstlight.net) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * See Documentation/usb/usb-serial.txt for more information on using this + * driver + * + * See http://geocities.com/i0xox0i for information on this driver and the + * earthmate usb device. + */ + +/* Thanks to Neil Whelchel for writing the first cypress m8 implementation + for linux. */ +/* Thanks to cypress for providing references for the hid reports. */ +/* Thanks to Jiang Zhang for providing links and for general help. */ +/* Code originates and was built up from ftdi_sio, belkin, pl2303 and others.*/ + + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/serial.h> +#include <linux/kfifo.h> +#include <linux/delay.h> +#include <linux/uaccess.h> +#include <asm/unaligned.h> + +#include "cypress_m8.h" + + +static bool stats; +static int interval; +static bool unstable_bauds; + +#define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>" +#define DRIVER_DESC "Cypress USB to Serial Driver" + +/* write buffer size defines */ +#define CYPRESS_BUF_SIZE 1024 + +static const struct usb_device_id id_table_earthmate[] = { + { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) }, + { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id id_table_cyphidcomrs232[] = { + { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, + { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, + { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id id_table_nokiaca42v2[] = { + { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id id_table_combined[] = { + { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) }, + { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, + { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, + { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, + { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, + { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table_combined); + +enum packet_format { + packet_format_1, /* b0:status, b1:payload count */ + packet_format_2 /* b0[7:3]:status, b0[2:0]:payload count */ +}; + +struct cypress_private { + spinlock_t lock; /* private lock */ + int chiptype; /* identifier of device, for quirks/etc */ + int bytes_in; /* used for statistics */ + int bytes_out; /* used for statistics */ + int cmd_count; /* used for statistics */ + int cmd_ctrl; /* always set this to 1 before issuing a command */ + struct kfifo write_fifo; /* write fifo */ + int write_urb_in_use; /* write urb in use indicator */ + int write_urb_interval; /* interval to use for write urb */ + int read_urb_interval; /* interval to use for read urb */ + int comm_is_ok; /* true if communication is (still) ok */ + int termios_initialized; + __u8 line_control; /* holds dtr / rts value */ + __u8 current_status; /* received from last read - info on dsr,cts,cd,ri,etc */ + __u8 current_config; /* stores the current configuration byte */ + __u8 rx_flags; /* throttling - used from whiteheat/ftdi_sio */ + enum packet_format pkt_fmt; /* format to use for packet send / receive */ + int get_cfg_unsafe; /* If true, the CYPRESS_GET_CONFIG is unsafe */ + int baud_rate; /* stores current baud rate in + integer form */ + int isthrottled; /* if throttled, discard reads */ + char prev_status; /* used for TIOCMIWAIT */ + /* we pass a pointer to this as the argument sent to + cypress_set_termios old_termios */ + struct ktermios tmp_termios; /* stores the old termios settings */ +}; + +/* function prototypes for the Cypress USB to serial device */ +static int cypress_earthmate_port_probe(struct usb_serial_port *port); +static int cypress_hidcom_port_probe(struct usb_serial_port *port); +static int cypress_ca42v2_port_probe(struct usb_serial_port *port); +static int cypress_port_remove(struct usb_serial_port *port); +static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port); +static void cypress_close(struct usb_serial_port *port); +static void cypress_dtr_rts(struct usb_serial_port *port, int on); +static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); +static void cypress_send(struct usb_serial_port *port); +static int cypress_write_room(struct tty_struct *tty); +static void cypress_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); +static int cypress_tiocmget(struct tty_struct *tty); +static int cypress_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +static int cypress_chars_in_buffer(struct tty_struct *tty); +static void cypress_throttle(struct tty_struct *tty); +static void cypress_unthrottle(struct tty_struct *tty); +static void cypress_set_dead(struct usb_serial_port *port); +static void cypress_read_int_callback(struct urb *urb); +static void cypress_write_int_callback(struct urb *urb); + +static struct usb_serial_driver cypress_earthmate_device = { + .driver = { + .owner = THIS_MODULE, + .name = "earthmate", + }, + .description = "DeLorme Earthmate USB", + .id_table = id_table_earthmate, + .num_ports = 1, + .port_probe = cypress_earthmate_port_probe, + .port_remove = cypress_port_remove, + .open = cypress_open, + .close = cypress_close, + .dtr_rts = cypress_dtr_rts, + .write = cypress_write, + .write_room = cypress_write_room, + .set_termios = cypress_set_termios, + .tiocmget = cypress_tiocmget, + .tiocmset = cypress_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .chars_in_buffer = cypress_chars_in_buffer, + .throttle = cypress_throttle, + .unthrottle = cypress_unthrottle, + .read_int_callback = cypress_read_int_callback, + .write_int_callback = cypress_write_int_callback, +}; + +static struct usb_serial_driver cypress_hidcom_device = { + .driver = { + .owner = THIS_MODULE, + .name = "cyphidcom", + }, + .description = "HID->COM RS232 Adapter", + .id_table = id_table_cyphidcomrs232, + .num_ports = 1, + .port_probe = cypress_hidcom_port_probe, + .port_remove = cypress_port_remove, + .open = cypress_open, + .close = cypress_close, + .dtr_rts = cypress_dtr_rts, + .write = cypress_write, + .write_room = cypress_write_room, + .set_termios = cypress_set_termios, + .tiocmget = cypress_tiocmget, + .tiocmset = cypress_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .chars_in_buffer = cypress_chars_in_buffer, + .throttle = cypress_throttle, + .unthrottle = cypress_unthrottle, + .read_int_callback = cypress_read_int_callback, + .write_int_callback = cypress_write_int_callback, +}; + +static struct usb_serial_driver cypress_ca42v2_device = { + .driver = { + .owner = THIS_MODULE, + .name = "nokiaca42v2", + }, + .description = "Nokia CA-42 V2 Adapter", + .id_table = id_table_nokiaca42v2, + .num_ports = 1, + .port_probe = cypress_ca42v2_port_probe, + .port_remove = cypress_port_remove, + .open = cypress_open, + .close = cypress_close, + .dtr_rts = cypress_dtr_rts, + .write = cypress_write, + .write_room = cypress_write_room, + .set_termios = cypress_set_termios, + .tiocmget = cypress_tiocmget, + .tiocmset = cypress_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .chars_in_buffer = cypress_chars_in_buffer, + .throttle = cypress_throttle, + .unthrottle = cypress_unthrottle, + .read_int_callback = cypress_read_int_callback, + .write_int_callback = cypress_write_int_callback, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &cypress_earthmate_device, &cypress_hidcom_device, + &cypress_ca42v2_device, NULL +}; + +/***************************************************************************** + * Cypress serial helper functions + *****************************************************************************/ + +/* FRWD Dongle hidcom needs to skip reset and speed checks */ +static inline bool is_frwd(struct usb_device *dev) +{ + return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) && + (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD)); +} + +static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) +{ + struct cypress_private *priv; + priv = usb_get_serial_port_data(port); + + if (unstable_bauds) + return new_rate; + + /* FRWD Dongle uses 115200 bps */ + if (is_frwd(port->serial->dev)) + return new_rate; + + /* + * The general purpose firmware for the Cypress M8 allows for + * a maximum speed of 57600bps (I have no idea whether DeLorme + * chose to use the general purpose firmware or not), if you + * need to modify this speed setting for your own project + * please add your own chiptype and modify the code likewise. + * The Cypress HID->COM device will work successfully up to + * 115200bps (but the actual throughput is around 3kBps). + */ + if (port->serial->dev->speed == USB_SPEED_LOW) { + /* + * Mike Isely <isely@pobox.com> 2-Feb-2008: The + * Cypress app note that describes this mechanism + * states the the low-speed part can't handle more + * than 800 bytes/sec, in which case 4800 baud is the + * safest speed for a part like that. + */ + if (new_rate > 4800) { + dev_dbg(&port->dev, + "%s - failed setting baud rate, device incapable speed %d\n", + __func__, new_rate); + return -1; + } + } + switch (priv->chiptype) { + case CT_EARTHMATE: + if (new_rate <= 600) { + /* 300 and 600 baud rates are supported under + * the generic firmware, but are not used with + * NMEA and SiRF protocols */ + dev_dbg(&port->dev, + "%s - failed setting baud rate, unsupported speed of %d on Earthmate GPS\n", + __func__, new_rate); + return -1; + } + break; + default: + break; + } + return new_rate; +} + + +/* This function can either set or retrieve the current serial line settings */ +static int cypress_serial_control(struct tty_struct *tty, + struct usb_serial_port *port, speed_t baud_rate, int data_bits, + int stop_bits, int parity_enable, int parity_type, int reset, + int cypress_request_type) +{ + int new_baudrate = 0, retval = 0, tries = 0; + struct cypress_private *priv; + struct device *dev = &port->dev; + u8 *feature_buffer; + const unsigned int feature_len = 5; + unsigned long flags; + + priv = usb_get_serial_port_data(port); + + if (!priv->comm_is_ok) + return -ENODEV; + + feature_buffer = kcalloc(feature_len, sizeof(u8), GFP_KERNEL); + if (!feature_buffer) + return -ENOMEM; + + switch (cypress_request_type) { + case CYPRESS_SET_CONFIG: + /* 0 means 'Hang up' so doesn't change the true bit rate */ + new_baudrate = priv->baud_rate; + if (baud_rate && baud_rate != priv->baud_rate) { + dev_dbg(dev, "%s - baud rate is changing\n", __func__); + retval = analyze_baud_rate(port, baud_rate); + if (retval >= 0) { + new_baudrate = retval; + dev_dbg(dev, "%s - New baud rate set to %d\n", + __func__, new_baudrate); + } + } + dev_dbg(dev, "%s - baud rate is being sent as %d\n", __func__, + new_baudrate); + + /* fill the feature_buffer with new configuration */ + put_unaligned_le32(new_baudrate, feature_buffer); + feature_buffer[4] |= data_bits; /* assign data bits in 2 bit space ( max 3 ) */ + /* 1 bit gap */ + feature_buffer[4] |= (stop_bits << 3); /* assign stop bits in 1 bit space */ + feature_buffer[4] |= (parity_enable << 4); /* assign parity flag in 1 bit space */ + feature_buffer[4] |= (parity_type << 5); /* assign parity type in 1 bit space */ + /* 1 bit gap */ + feature_buffer[4] |= (reset << 7); /* assign reset at end of byte, 1 bit space */ + + dev_dbg(dev, "%s - device is being sent this feature report:\n", __func__); + dev_dbg(dev, "%s - %02X - %02X - %02X - %02X - %02X\n", __func__, + feature_buffer[0], feature_buffer[1], + feature_buffer[2], feature_buffer[3], + feature_buffer[4]); + + do { + retval = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + HID_REQ_SET_REPORT, + USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS, + 0x0300, 0, feature_buffer, + feature_len, 500); + + if (tries++ >= 3) + break; + + } while (retval != feature_len && + retval != -ENODEV); + + if (retval != feature_len) { + dev_err(dev, "%s - failed sending serial line settings - %d\n", + __func__, retval); + cypress_set_dead(port); + } else { + spin_lock_irqsave(&priv->lock, flags); + priv->baud_rate = new_baudrate; + priv->current_config = feature_buffer[4]; + spin_unlock_irqrestore(&priv->lock, flags); + /* If we asked for a speed change encode it */ + if (baud_rate) + tty_encode_baud_rate(tty, + new_baudrate, new_baudrate); + } + break; + case CYPRESS_GET_CONFIG: + if (priv->get_cfg_unsafe) { + /* Not implemented for this device, + and if we try to do it we're likely + to crash the hardware. */ + retval = -ENOTTY; + goto out; + } + dev_dbg(dev, "%s - retreiving serial line settings\n", __func__); + do { + retval = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + HID_REQ_GET_REPORT, + USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS, + 0x0300, 0, feature_buffer, + feature_len, 500); + + if (tries++ >= 3) + break; + } while (retval != feature_len + && retval != -ENODEV); + + if (retval != feature_len) { + dev_err(dev, "%s - failed to retrieve serial line settings - %d\n", + __func__, retval); + cypress_set_dead(port); + goto out; + } else { + spin_lock_irqsave(&priv->lock, flags); + /* store the config in one byte, and later + use bit masks to check values */ + priv->current_config = feature_buffer[4]; + priv->baud_rate = get_unaligned_le32(feature_buffer); + spin_unlock_irqrestore(&priv->lock, flags); + } + } + spin_lock_irqsave(&priv->lock, flags); + ++priv->cmd_count; + spin_unlock_irqrestore(&priv->lock, flags); +out: + kfree(feature_buffer); + return retval; +} /* cypress_serial_control */ + + +static void cypress_set_dead(struct usb_serial_port *port) +{ + struct cypress_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (!priv->comm_is_ok) { + spin_unlock_irqrestore(&priv->lock, flags); + return; + } + priv->comm_is_ok = 0; + spin_unlock_irqrestore(&priv->lock, flags); + + dev_err(&port->dev, "cypress_m8 suspending failing port %d - " + "interval might be too short\n", port->port_number); +} + + +/***************************************************************************** + * Cypress serial driver functions + *****************************************************************************/ + + +static int cypress_generic_port_probe(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct cypress_private *priv; + + priv = kzalloc(sizeof(struct cypress_private), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->comm_is_ok = !0; + spin_lock_init(&priv->lock); + if (kfifo_alloc(&priv->write_fifo, CYPRESS_BUF_SIZE, GFP_KERNEL)) { + kfree(priv); + return -ENOMEM; + } + + /* Skip reset for FRWD device. It is a workaound: + device hangs if it receives SET_CONFIGURE in Configured + state. */ + if (!is_frwd(serial->dev)) + usb_reset_configuration(serial->dev); + + priv->cmd_ctrl = 0; + priv->line_control = 0; + priv->termios_initialized = 0; + priv->rx_flags = 0; + /* Default packet format setting is determined by packet size. + Anything with a size larger then 9 must have a separate + count field since the 3 bit count field is otherwise too + small. Otherwise we can use the slightly more compact + format. This is in accordance with the cypress_m8 serial + converter app note. */ + if (port->interrupt_out_size > 9) + priv->pkt_fmt = packet_format_1; + else + priv->pkt_fmt = packet_format_2; + + if (interval > 0) { + priv->write_urb_interval = interval; + priv->read_urb_interval = interval; + dev_dbg(&port->dev, "%s - read & write intervals forced to %d\n", + __func__, interval); + } else { + priv->write_urb_interval = port->interrupt_out_urb->interval; + priv->read_urb_interval = port->interrupt_in_urb->interval; + dev_dbg(&port->dev, "%s - intervals: read=%d write=%d\n", + __func__, priv->read_urb_interval, + priv->write_urb_interval); + } + usb_set_serial_port_data(port, priv); + + port->port.drain_delay = 256; + + return 0; +} + + +static int cypress_earthmate_port_probe(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct cypress_private *priv; + int ret; + + ret = cypress_generic_port_probe(port); + if (ret) { + dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); + return ret; + } + + priv = usb_get_serial_port_data(port); + priv->chiptype = CT_EARTHMATE; + /* All Earthmate devices use the separated-count packet + format! Idiotic. */ + priv->pkt_fmt = packet_format_1; + if (serial->dev->descriptor.idProduct != + cpu_to_le16(PRODUCT_ID_EARTHMATEUSB)) { + /* The old original USB Earthmate seemed able to + handle GET_CONFIG requests; everything they've + produced since that time crashes if this command is + attempted :-( */ + dev_dbg(&port->dev, + "%s - Marking this device as unsafe for GET_CONFIG commands\n", + __func__); + priv->get_cfg_unsafe = !0; + } + + return 0; +} + +static int cypress_hidcom_port_probe(struct usb_serial_port *port) +{ + struct cypress_private *priv; + int ret; + + ret = cypress_generic_port_probe(port); + if (ret) { + dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); + return ret; + } + + priv = usb_get_serial_port_data(port); + priv->chiptype = CT_CYPHIDCOM; + + return 0; +} + +static int cypress_ca42v2_port_probe(struct usb_serial_port *port) +{ + struct cypress_private *priv; + int ret; + + ret = cypress_generic_port_probe(port); + if (ret) { + dev_dbg(&port->dev, "%s - Failed setting up port\n", __func__); + return ret; + } + + priv = usb_get_serial_port_data(port); + priv->chiptype = CT_CA42V2; + + return 0; +} + +static int cypress_port_remove(struct usb_serial_port *port) +{ + struct cypress_private *priv; + + priv = usb_get_serial_port_data(port); + + kfifo_free(&priv->write_fifo); + kfree(priv); + + return 0; +} + +static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct cypress_private *priv = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + unsigned long flags; + int result = 0; + + if (!priv->comm_is_ok) + return -EIO; + + /* clear halts before open */ + usb_clear_halt(serial->dev, 0x81); + usb_clear_halt(serial->dev, 0x02); + + spin_lock_irqsave(&priv->lock, flags); + /* reset read/write statistics */ + priv->bytes_in = 0; + priv->bytes_out = 0; + priv->cmd_count = 0; + priv->rx_flags = 0; + spin_unlock_irqrestore(&priv->lock, flags); + + /* Set termios */ + cypress_send(port); + + if (tty) + cypress_set_termios(tty, port, &priv->tmp_termios); + + /* setup the port and start reading from the device */ + if (!port->interrupt_in_urb) { + dev_err(&port->dev, "%s - interrupt_in_urb is empty!\n", + __func__); + return -1; + } + + usb_fill_int_urb(port->interrupt_in_urb, serial->dev, + usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress), + port->interrupt_in_urb->transfer_buffer, + port->interrupt_in_urb->transfer_buffer_length, + cypress_read_int_callback, port, priv->read_urb_interval); + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + + if (result) { + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __func__, result); + cypress_set_dead(port); + } + + return result; +} /* cypress_open */ + +static void cypress_dtr_rts(struct usb_serial_port *port, int on) +{ + struct cypress_private *priv = usb_get_serial_port_data(port); + /* drop dtr and rts */ + spin_lock_irq(&priv->lock); + if (on == 0) + priv->line_control = 0; + else + priv->line_control = CONTROL_DTR | CONTROL_RTS; + priv->cmd_ctrl = 1; + spin_unlock_irq(&priv->lock); + cypress_write(NULL, port, NULL, 0); +} + +static void cypress_close(struct usb_serial_port *port) +{ + struct cypress_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + kfifo_reset_out(&priv->write_fifo); + spin_unlock_irqrestore(&priv->lock, flags); + + dev_dbg(&port->dev, "%s - stopping urbs\n", __func__); + usb_kill_urb(port->interrupt_in_urb); + usb_kill_urb(port->interrupt_out_urb); + + if (stats) + dev_info(&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n", + priv->bytes_in, priv->bytes_out, priv->cmd_count); +} /* cypress_close */ + + +static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + struct cypress_private *priv = usb_get_serial_port_data(port); + + dev_dbg(&port->dev, "%s - %d bytes\n", __func__, count); + + /* line control commands, which need to be executed immediately, + are not put into the buffer for obvious reasons. + */ + if (priv->cmd_ctrl) { + count = 0; + goto finish; + } + + if (!count) + return count; + + count = kfifo_in_locked(&priv->write_fifo, buf, count, &priv->lock); + +finish: + cypress_send(port); + + return count; +} /* cypress_write */ + + +static void cypress_send(struct usb_serial_port *port) +{ + int count = 0, result, offset, actual_size; + struct cypress_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; + unsigned long flags; + + if (!priv->comm_is_ok) + return; + + dev_dbg(dev, "%s - interrupt out size is %d\n", __func__, + port->interrupt_out_size); + + spin_lock_irqsave(&priv->lock, flags); + if (priv->write_urb_in_use) { + dev_dbg(dev, "%s - can't write, urb in use\n", __func__); + spin_unlock_irqrestore(&priv->lock, flags); + return; + } + spin_unlock_irqrestore(&priv->lock, flags); + + /* clear buffer */ + memset(port->interrupt_out_urb->transfer_buffer, 0, + port->interrupt_out_size); + + spin_lock_irqsave(&priv->lock, flags); + switch (priv->pkt_fmt) { + default: + case packet_format_1: + /* this is for the CY7C64013... */ + offset = 2; + port->interrupt_out_buffer[0] = priv->line_control; + break; + case packet_format_2: + /* this is for the CY7C63743... */ + offset = 1; + port->interrupt_out_buffer[0] = priv->line_control; + break; + } + + if (priv->line_control & CONTROL_RESET) + priv->line_control &= ~CONTROL_RESET; + + if (priv->cmd_ctrl) { + priv->cmd_count++; + dev_dbg(dev, "%s - line control command being issued\n", __func__); + spin_unlock_irqrestore(&priv->lock, flags); + goto send; + } else + spin_unlock_irqrestore(&priv->lock, flags); + + count = kfifo_out_locked(&priv->write_fifo, + &port->interrupt_out_buffer[offset], + port->interrupt_out_size - offset, + &priv->lock); + if (count == 0) + return; + + switch (priv->pkt_fmt) { + default: + case packet_format_1: + port->interrupt_out_buffer[1] = count; + break; + case packet_format_2: + port->interrupt_out_buffer[0] |= count; + } + + dev_dbg(dev, "%s - count is %d\n", __func__, count); + +send: + spin_lock_irqsave(&priv->lock, flags); + priv->write_urb_in_use = 1; + spin_unlock_irqrestore(&priv->lock, flags); + + if (priv->cmd_ctrl) + actual_size = 1; + else + actual_size = count + + (priv->pkt_fmt == packet_format_1 ? 2 : 1); + + usb_serial_debug_data(dev, __func__, port->interrupt_out_size, + port->interrupt_out_urb->transfer_buffer); + + usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev, + usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress), + port->interrupt_out_buffer, port->interrupt_out_size, + cypress_write_int_callback, port, priv->write_urb_interval); + result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC); + if (result) { + dev_err_console(port, + "%s - failed submitting write urb, error %d\n", + __func__, result); + priv->write_urb_in_use = 0; + cypress_set_dead(port); + } + + spin_lock_irqsave(&priv->lock, flags); + if (priv->cmd_ctrl) + priv->cmd_ctrl = 0; + + /* do not count the line control and size bytes */ + priv->bytes_out += count; + spin_unlock_irqrestore(&priv->lock, flags); + + usb_serial_port_softint(port); +} /* cypress_send */ + + +/* returns how much space is available in the soft buffer */ +static int cypress_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct cypress_private *priv = usb_get_serial_port_data(port); + int room = 0; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + room = kfifo_avail(&priv->write_fifo); + spin_unlock_irqrestore(&priv->lock, flags); + + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); + return room; +} + + +static int cypress_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct cypress_private *priv = usb_get_serial_port_data(port); + __u8 status, control; + unsigned int result = 0; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + control = priv->line_control; + status = priv->current_status; + spin_unlock_irqrestore(&priv->lock, flags); + + result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) + | ((control & CONTROL_RTS) ? TIOCM_RTS : 0) + | ((status & UART_CTS) ? TIOCM_CTS : 0) + | ((status & UART_DSR) ? TIOCM_DSR : 0) + | ((status & UART_RI) ? TIOCM_RI : 0) + | ((status & UART_CD) ? TIOCM_CD : 0); + + dev_dbg(&port->dev, "%s - result = %x\n", __func__, result); + + return result; +} + + +static int cypress_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct cypress_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (set & TIOCM_RTS) + priv->line_control |= CONTROL_RTS; + if (set & TIOCM_DTR) + priv->line_control |= CONTROL_DTR; + if (clear & TIOCM_RTS) + priv->line_control &= ~CONTROL_RTS; + if (clear & TIOCM_DTR) + priv->line_control &= ~CONTROL_DTR; + priv->cmd_ctrl = 1; + spin_unlock_irqrestore(&priv->lock, flags); + + return cypress_write(tty, port, NULL, 0); +} + +static void cypress_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + struct cypress_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; + int data_bits, stop_bits, parity_type, parity_enable; + unsigned cflag, iflag; + unsigned long flags; + __u8 oldlines; + int linechange = 0; + + spin_lock_irqsave(&priv->lock, flags); + /* We can't clean this one up as we don't know the device type + early enough */ + if (!priv->termios_initialized) { + if (priv->chiptype == CT_EARTHMATE) { + tty->termios = tty_std_termios; + tty->termios.c_cflag = B4800 | CS8 | CREAD | HUPCL | + CLOCAL; + tty->termios.c_ispeed = 4800; + tty->termios.c_ospeed = 4800; + } else if (priv->chiptype == CT_CYPHIDCOM) { + tty->termios = tty_std_termios; + tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | + CLOCAL; + tty->termios.c_ispeed = 9600; + tty->termios.c_ospeed = 9600; + } else if (priv->chiptype == CT_CA42V2) { + tty->termios = tty_std_termios; + tty->termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | + CLOCAL; + tty->termios.c_ispeed = 9600; + tty->termios.c_ospeed = 9600; + } + priv->termios_initialized = 1; + } + spin_unlock_irqrestore(&priv->lock, flags); + + /* Unsupported features need clearing */ + tty->termios.c_cflag &= ~(CMSPAR|CRTSCTS); + + cflag = tty->termios.c_cflag; + iflag = tty->termios.c_iflag; + + /* check if there are new settings */ + if (old_termios) { + spin_lock_irqsave(&priv->lock, flags); + priv->tmp_termios = tty->termios; + spin_unlock_irqrestore(&priv->lock, flags); + } + + /* set number of data bits, parity, stop bits */ + /* when parity is disabled the parity type bit is ignored */ + + /* 1 means 2 stop bits, 0 means 1 stop bit */ + stop_bits = cflag & CSTOPB ? 1 : 0; + + if (cflag & PARENB) { + parity_enable = 1; + /* 1 means odd parity, 0 means even parity */ + parity_type = cflag & PARODD ? 1 : 0; + } else + parity_enable = parity_type = 0; + + switch (cflag & CSIZE) { + case CS5: + data_bits = 0; + break; + case CS6: + data_bits = 1; + break; + case CS7: + data_bits = 2; + break; + case CS8: + data_bits = 3; + break; + default: + dev_err(dev, "%s - CSIZE was set, but not CS5-CS8\n", __func__); + data_bits = 3; + } + spin_lock_irqsave(&priv->lock, flags); + oldlines = priv->line_control; + if ((cflag & CBAUD) == B0) { + /* drop dtr and rts */ + dev_dbg(dev, "%s - dropping the lines, baud rate 0bps\n", __func__); + priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); + } else + priv->line_control = (CONTROL_DTR | CONTROL_RTS); + spin_unlock_irqrestore(&priv->lock, flags); + + dev_dbg(dev, "%s - sending %d stop_bits, %d parity_enable, %d parity_type, %d data_bits (+5)\n", + __func__, stop_bits, parity_enable, parity_type, data_bits); + + cypress_serial_control(tty, port, tty_get_baud_rate(tty), + data_bits, stop_bits, + parity_enable, parity_type, + 0, CYPRESS_SET_CONFIG); + + /* we perform a CYPRESS_GET_CONFIG so that the current settings are + * filled into the private structure this should confirm that all is + * working if it returns what we just set */ + cypress_serial_control(tty, port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG); + + /* Here we can define custom tty settings for devices; the main tty + * termios flag base comes from empeg.c */ + + spin_lock_irqsave(&priv->lock, flags); + if (priv->chiptype == CT_EARTHMATE && priv->baud_rate == 4800) { + dev_dbg(dev, "Using custom termios settings for a baud rate of 4800bps.\n"); + /* define custom termios settings for NMEA protocol */ + + tty->termios.c_iflag /* input modes - */ + &= ~(IGNBRK /* disable ignore break */ + | BRKINT /* disable break causes interrupt */ + | PARMRK /* disable mark parity errors */ + | ISTRIP /* disable clear high bit of input char */ + | INLCR /* disable translate NL to CR */ + | IGNCR /* disable ignore CR */ + | ICRNL /* disable translate CR to NL */ + | IXON); /* disable enable XON/XOFF flow control */ + + tty->termios.c_oflag /* output modes */ + &= ~OPOST; /* disable postprocess output char */ + + tty->termios.c_lflag /* line discipline modes */ + &= ~(ECHO /* disable echo input characters */ + | ECHONL /* disable echo new line */ + | ICANON /* disable erase, kill, werase, and rprnt + special characters */ + | ISIG /* disable interrupt, quit, and suspend + special characters */ + | IEXTEN); /* disable non-POSIX special characters */ + } /* CT_CYPHIDCOM: Application should handle this for device */ + + linechange = (priv->line_control != oldlines); + spin_unlock_irqrestore(&priv->lock, flags); + + /* if necessary, set lines */ + if (linechange) { + priv->cmd_ctrl = 1; + cypress_write(tty, port, NULL, 0); + } +} /* cypress_set_termios */ + + +/* returns amount of data still left in soft buffer */ +static int cypress_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct cypress_private *priv = usb_get_serial_port_data(port); + int chars = 0; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + chars = kfifo_len(&priv->write_fifo); + spin_unlock_irqrestore(&priv->lock, flags); + + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); + return chars; +} + + +static void cypress_throttle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct cypress_private *priv = usb_get_serial_port_data(port); + + spin_lock_irq(&priv->lock); + priv->rx_flags = THROTTLED; + spin_unlock_irq(&priv->lock); +} + + +static void cypress_unthrottle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct cypress_private *priv = usb_get_serial_port_data(port); + int actually_throttled, result; + + spin_lock_irq(&priv->lock); + actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED; + priv->rx_flags = 0; + spin_unlock_irq(&priv->lock); + + if (!priv->comm_is_ok) + return; + + if (actually_throttled) { + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result) { + dev_err(&port->dev, "%s - failed submitting read urb, " + "error %d\n", __func__, result); + cypress_set_dead(port); + } + } +} + + +static void cypress_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct cypress_private *priv = usb_get_serial_port_data(port); + struct device *dev = &urb->dev->dev; + struct tty_struct *tty; + unsigned char *data = urb->transfer_buffer; + unsigned long flags; + char tty_flag = TTY_NORMAL; + int havedata = 0; + int bytes = 0; + int result; + int i = 0; + int status = urb->status; + + switch (status) { + case 0: /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* precursor to disconnect so just go away */ + return; + case -EPIPE: + /* Can't call usb_clear_halt while in_interrupt */ + /* FALLS THROUGH */ + default: + /* something ugly is going on... */ + dev_err(dev, "%s - unexpected nonzero read status received: %d\n", + __func__, status); + cypress_set_dead(port); + return; + } + + spin_lock_irqsave(&priv->lock, flags); + if (priv->rx_flags & THROTTLED) { + dev_dbg(dev, "%s - now throttling\n", __func__); + priv->rx_flags |= ACTUALLY_THROTTLED; + spin_unlock_irqrestore(&priv->lock, flags); + return; + } + spin_unlock_irqrestore(&priv->lock, flags); + + tty = tty_port_tty_get(&port->port); + if (!tty) { + dev_dbg(dev, "%s - bad tty pointer - exiting\n", __func__); + return; + } + + spin_lock_irqsave(&priv->lock, flags); + result = urb->actual_length; + switch (priv->pkt_fmt) { + default: + case packet_format_1: + /* This is for the CY7C64013... */ + priv->current_status = data[0] & 0xF8; + bytes = data[1] + 2; + i = 2; + if (bytes > 2) + havedata = 1; + break; + case packet_format_2: + /* This is for the CY7C63743... */ + priv->current_status = data[0] & 0xF8; + bytes = (data[0] & 0x07) + 1; + i = 1; + if (bytes > 1) + havedata = 1; + break; + } + spin_unlock_irqrestore(&priv->lock, flags); + if (result < bytes) { + dev_dbg(dev, + "%s - wrong packet size - received %d bytes but packet said %d bytes\n", + __func__, result, bytes); + goto continue_read; + } + + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); + + spin_lock_irqsave(&priv->lock, flags); + /* check to see if status has changed */ + if (priv->current_status != priv->prev_status) { + u8 delta = priv->current_status ^ priv->prev_status; + + if (delta & UART_MSR_MASK) { + if (delta & UART_CTS) + port->icount.cts++; + if (delta & UART_DSR) + port->icount.dsr++; + if (delta & UART_RI) + port->icount.rng++; + if (delta & UART_CD) + port->icount.dcd++; + + wake_up_interruptible(&port->port.delta_msr_wait); + } + + priv->prev_status = priv->current_status; + } + spin_unlock_irqrestore(&priv->lock, flags); + + /* hangup, as defined in acm.c... this might be a bad place for it + * though */ + if (tty && !(tty->termios.c_cflag & CLOCAL) && + !(priv->current_status & UART_CD)) { + dev_dbg(dev, "%s - calling hangup\n", __func__); + tty_hangup(tty); + goto continue_read; + } + + /* There is one error bit... I'm assuming it is a parity error + * indicator as the generic firmware will set this bit to 1 if a + * parity error occurs. + * I can not find reference to any other error events. */ + spin_lock_irqsave(&priv->lock, flags); + if (priv->current_status & CYP_ERROR) { + spin_unlock_irqrestore(&priv->lock, flags); + tty_flag = TTY_PARITY; + dev_dbg(dev, "%s - Parity Error detected\n", __func__); + } else + spin_unlock_irqrestore(&priv->lock, flags); + + /* process read if there is data other than line status */ + if (bytes > i) { + tty_insert_flip_string_fixed_flag(&port->port, data + i, + tty_flag, bytes - i); + tty_flip_buffer_push(&port->port); + } + + spin_lock_irqsave(&priv->lock, flags); + /* control and status byte(s) are also counted */ + priv->bytes_in += bytes; + spin_unlock_irqrestore(&priv->lock, flags); + +continue_read: + tty_kref_put(tty); + + /* Continue trying to always read */ + + if (priv->comm_is_ok) { + usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev, + usb_rcvintpipe(port->serial->dev, + port->interrupt_in_endpointAddress), + port->interrupt_in_urb->transfer_buffer, + port->interrupt_in_urb->transfer_buffer_length, + cypress_read_int_callback, port, + priv->read_urb_interval); + result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); + if (result && result != -EPERM) { + dev_err(dev, "%s - failed resubmitting read urb, error %d\n", + __func__, result); + cypress_set_dead(port); + } + } +} /* cypress_read_int_callback */ + + +static void cypress_write_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct cypress_private *priv = usb_get_serial_port_data(port); + struct device *dev = &urb->dev->dev; + int status = urb->status; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(dev, "%s - urb shutting down with status: %d\n", + __func__, status); + priv->write_urb_in_use = 0; + return; + case -EPIPE: + /* Cannot call usb_clear_halt while in_interrupt */ + /* FALLTHROUGH */ + default: + dev_err(dev, "%s - unexpected nonzero write status received: %d\n", + __func__, status); + cypress_set_dead(port); + break; + } + priv->write_urb_in_use = 0; + + /* send any buffered data */ + cypress_send(port); +} + +module_usb_serial_driver(serial_drivers, id_table_combined); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +module_param(stats, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(stats, "Enable statistics or not"); +module_param(interval, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(interval, "Overrides interrupt interval"); +module_param(unstable_bauds, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(unstable_bauds, "Allow unstable baud rates"); diff --git a/kernel/drivers/usb/serial/cypress_m8.h b/kernel/drivers/usb/serial/cypress_m8.h new file mode 100644 index 000000000..119d2e170 --- /dev/null +++ b/kernel/drivers/usb/serial/cypress_m8.h @@ -0,0 +1,78 @@ +#ifndef CYPRESS_M8_H +#define CYPRESS_M8_H + +/* + * definitions and function prototypes used for the cypress USB to Serial + * controller + */ + +/* + * For sending our feature buffer - controlling serial communication states. + * Linux HID has no support for serial devices so we do this through the driver + */ +#define HID_REQ_GET_REPORT 0x01 +#define HID_REQ_SET_REPORT 0x09 + +/* List other cypress USB to Serial devices here, and add them to the id_table */ + +/* DeLorme Earthmate USB - a GPS device */ +#define VENDOR_ID_DELORME 0x1163 +#define PRODUCT_ID_EARTHMATEUSB 0x0100 +#define PRODUCT_ID_EARTHMATEUSB_LT20 0x0200 + +/* Cypress HID->COM RS232 Adapter */ +#define VENDOR_ID_CYPRESS 0x04b4 +#define PRODUCT_ID_CYPHIDCOM 0x5500 + +/* FRWD Dongle - a GPS sports watch */ +#define VENDOR_ID_FRWD 0x6737 +#define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001 + +/* Powercom UPS, chip CY7C63723 */ +#define VENDOR_ID_POWERCOM 0x0d9f +#define PRODUCT_ID_UPS 0x0002 + +/* Nokia CA-42 USB to serial cable */ +#define VENDOR_ID_DAZZLE 0x07d0 +#define PRODUCT_ID_CA42 0x4101 +/* End of device listing */ + +/* Used for setting / requesting serial line settings */ +#define CYPRESS_SET_CONFIG 0x01 +#define CYPRESS_GET_CONFIG 0x02 + +/* Used for throttle control */ +#define THROTTLED 0x1 +#define ACTUALLY_THROTTLED 0x2 + +/* + * chiptypes - used in case firmware differs from the generic form ... offering + * different baud speeds/etc. + */ +#define CT_EARTHMATE 0x01 +#define CT_CYPHIDCOM 0x02 +#define CT_CA42V2 0x03 +#define CT_GENERIC 0x0F +/* End of chiptype definitions */ + +/* + * RS-232 serial data communication protocol definitions. + * + * These are sent / read at byte 0 of the input/output hid reports. + * You can find these values defined in the CY4601 USB to Serial design notes. + */ + +#define CONTROL_DTR 0x20 /* data terminal ready */ +#define CONTROL_RTS 0x10 /* request to send */ +#define CONTROL_RESET 0x08 /* sent with output report */ + +#define UART_MSR_MASK 0xf0 +#define UART_RI 0x80 /* ring indicator */ +#define UART_CD 0x40 /* carrier detect */ +#define UART_DSR 0x20 /* data set ready */ +#define UART_CTS 0x10 /* clear to send */ +#define CYP_ERROR 0x08 /* received from input report */ + +/* End of RS-232 protocol definitions */ + +#endif /* CYPRESS_M8_H */ diff --git a/kernel/drivers/usb/serial/digi_acceleport.c b/kernel/drivers/usb/serial/digi_acceleport.c new file mode 100644 index 000000000..12b0e6747 --- /dev/null +++ b/kernel/drivers/usb/serial/digi_acceleport.c @@ -0,0 +1,1540 @@ +/* +* Digi AccelePort USB-4 and USB-2 Serial Converters +* +* Copyright 2000 by Digi International +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* Shamelessly based on Brian Warner's keyspan_pda.c and Greg Kroah-Hartman's +* usb-serial driver. +* +* Peter Berger (pberger@brimson.com) +* Al Borchers (borchers@steinerpoint.com) +*/ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/workqueue.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/wait.h> +#include <linux/usb/serial.h> + +/* Defines */ + +#define DRIVER_AUTHOR "Peter Berger <pberger@brimson.com>, Al Borchers <borchers@steinerpoint.com>" +#define DRIVER_DESC "Digi AccelePort USB-2/USB-4 Serial Converter driver" + +/* port output buffer length -- must be <= transfer buffer length - 2 */ +/* so we can be sure to send the full buffer in one urb */ +#define DIGI_OUT_BUF_SIZE 8 + +/* port input buffer length -- must be >= transfer buffer length - 3 */ +/* so we can be sure to hold at least one full buffer from one urb */ +#define DIGI_IN_BUF_SIZE 64 + +/* retry timeout while sleeping */ +#define DIGI_RETRY_TIMEOUT (HZ/10) + +/* timeout while waiting for tty output to drain in close */ +/* this delay is used twice in close, so the total delay could */ +/* be twice this value */ +#define DIGI_CLOSE_TIMEOUT (5*HZ) + + +/* AccelePort USB Defines */ + +/* ids */ +#define DIGI_VENDOR_ID 0x05c5 +#define DIGI_2_ID 0x0002 /* USB-2 */ +#define DIGI_4_ID 0x0004 /* USB-4 */ + +/* commands + * "INB": can be used on the in-band endpoint + * "OOB": can be used on the out-of-band endpoint + */ +#define DIGI_CMD_SET_BAUD_RATE 0 /* INB, OOB */ +#define DIGI_CMD_SET_WORD_SIZE 1 /* INB, OOB */ +#define DIGI_CMD_SET_PARITY 2 /* INB, OOB */ +#define DIGI_CMD_SET_STOP_BITS 3 /* INB, OOB */ +#define DIGI_CMD_SET_INPUT_FLOW_CONTROL 4 /* INB, OOB */ +#define DIGI_CMD_SET_OUTPUT_FLOW_CONTROL 5 /* INB, OOB */ +#define DIGI_CMD_SET_DTR_SIGNAL 6 /* INB, OOB */ +#define DIGI_CMD_SET_RTS_SIGNAL 7 /* INB, OOB */ +#define DIGI_CMD_READ_INPUT_SIGNALS 8 /* OOB */ +#define DIGI_CMD_IFLUSH_FIFO 9 /* OOB */ +#define DIGI_CMD_RECEIVE_ENABLE 10 /* INB, OOB */ +#define DIGI_CMD_BREAK_CONTROL 11 /* INB, OOB */ +#define DIGI_CMD_LOCAL_LOOPBACK 12 /* INB, OOB */ +#define DIGI_CMD_TRANSMIT_IDLE 13 /* INB, OOB */ +#define DIGI_CMD_READ_UART_REGISTER 14 /* OOB */ +#define DIGI_CMD_WRITE_UART_REGISTER 15 /* INB, OOB */ +#define DIGI_CMD_AND_UART_REGISTER 16 /* INB, OOB */ +#define DIGI_CMD_OR_UART_REGISTER 17 /* INB, OOB */ +#define DIGI_CMD_SEND_DATA 18 /* INB */ +#define DIGI_CMD_RECEIVE_DATA 19 /* INB */ +#define DIGI_CMD_RECEIVE_DISABLE 20 /* INB */ +#define DIGI_CMD_GET_PORT_TYPE 21 /* OOB */ + +/* baud rates */ +#define DIGI_BAUD_50 0 +#define DIGI_BAUD_75 1 +#define DIGI_BAUD_110 2 +#define DIGI_BAUD_150 3 +#define DIGI_BAUD_200 4 +#define DIGI_BAUD_300 5 +#define DIGI_BAUD_600 6 +#define DIGI_BAUD_1200 7 +#define DIGI_BAUD_1800 8 +#define DIGI_BAUD_2400 9 +#define DIGI_BAUD_4800 10 +#define DIGI_BAUD_7200 11 +#define DIGI_BAUD_9600 12 +#define DIGI_BAUD_14400 13 +#define DIGI_BAUD_19200 14 +#define DIGI_BAUD_28800 15 +#define DIGI_BAUD_38400 16 +#define DIGI_BAUD_57600 17 +#define DIGI_BAUD_76800 18 +#define DIGI_BAUD_115200 19 +#define DIGI_BAUD_153600 20 +#define DIGI_BAUD_230400 21 +#define DIGI_BAUD_460800 22 + +/* arguments */ +#define DIGI_WORD_SIZE_5 0 +#define DIGI_WORD_SIZE_6 1 +#define DIGI_WORD_SIZE_7 2 +#define DIGI_WORD_SIZE_8 3 + +#define DIGI_PARITY_NONE 0 +#define DIGI_PARITY_ODD 1 +#define DIGI_PARITY_EVEN 2 +#define DIGI_PARITY_MARK 3 +#define DIGI_PARITY_SPACE 4 + +#define DIGI_STOP_BITS_1 0 +#define DIGI_STOP_BITS_2 1 + +#define DIGI_INPUT_FLOW_CONTROL_XON_XOFF 1 +#define DIGI_INPUT_FLOW_CONTROL_RTS 2 +#define DIGI_INPUT_FLOW_CONTROL_DTR 4 + +#define DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF 1 +#define DIGI_OUTPUT_FLOW_CONTROL_CTS 2 +#define DIGI_OUTPUT_FLOW_CONTROL_DSR 4 + +#define DIGI_DTR_INACTIVE 0 +#define DIGI_DTR_ACTIVE 1 +#define DIGI_DTR_INPUT_FLOW_CONTROL 2 + +#define DIGI_RTS_INACTIVE 0 +#define DIGI_RTS_ACTIVE 1 +#define DIGI_RTS_INPUT_FLOW_CONTROL 2 +#define DIGI_RTS_TOGGLE 3 + +#define DIGI_FLUSH_TX 1 +#define DIGI_FLUSH_RX 2 +#define DIGI_RESUME_TX 4 /* clears xoff condition */ + +#define DIGI_TRANSMIT_NOT_IDLE 0 +#define DIGI_TRANSMIT_IDLE 1 + +#define DIGI_DISABLE 0 +#define DIGI_ENABLE 1 + +#define DIGI_DEASSERT 0 +#define DIGI_ASSERT 1 + +/* in band status codes */ +#define DIGI_OVERRUN_ERROR 4 +#define DIGI_PARITY_ERROR 8 +#define DIGI_FRAMING_ERROR 16 +#define DIGI_BREAK_ERROR 32 + +/* out of band status */ +#define DIGI_NO_ERROR 0 +#define DIGI_BAD_FIRST_PARAMETER 1 +#define DIGI_BAD_SECOND_PARAMETER 2 +#define DIGI_INVALID_LINE 3 +#define DIGI_INVALID_OPCODE 4 + +/* input signals */ +#define DIGI_READ_INPUT_SIGNALS_SLOT 1 +#define DIGI_READ_INPUT_SIGNALS_ERR 2 +#define DIGI_READ_INPUT_SIGNALS_BUSY 4 +#define DIGI_READ_INPUT_SIGNALS_PE 8 +#define DIGI_READ_INPUT_SIGNALS_CTS 16 +#define DIGI_READ_INPUT_SIGNALS_DSR 32 +#define DIGI_READ_INPUT_SIGNALS_RI 64 +#define DIGI_READ_INPUT_SIGNALS_DCD 128 + + +/* Structures */ + +struct digi_serial { + spinlock_t ds_serial_lock; + struct usb_serial_port *ds_oob_port; /* out-of-band port */ + int ds_oob_port_num; /* index of out-of-band port */ + int ds_device_started; +}; + +struct digi_port { + spinlock_t dp_port_lock; + int dp_port_num; + int dp_out_buf_len; + unsigned char dp_out_buf[DIGI_OUT_BUF_SIZE]; + int dp_write_urb_in_use; + unsigned int dp_modem_signals; + int dp_transmit_idle; + wait_queue_head_t dp_transmit_idle_wait; + int dp_throttled; + int dp_throttle_restart; + wait_queue_head_t dp_flush_wait; + wait_queue_head_t dp_close_wait; /* wait queue for close */ + struct work_struct dp_wakeup_work; + struct usb_serial_port *dp_port; +}; + + +/* Local Function Declarations */ + +static void digi_wakeup_write_lock(struct work_struct *work); +static int digi_write_oob_command(struct usb_serial_port *port, + unsigned char *buf, int count, int interruptible); +static int digi_write_inb_command(struct usb_serial_port *port, + unsigned char *buf, int count, unsigned long timeout); +static int digi_set_modem_signals(struct usb_serial_port *port, + unsigned int modem_signals, int interruptible); +static int digi_transmit_idle(struct usb_serial_port *port, + unsigned long timeout); +static void digi_rx_throttle(struct tty_struct *tty); +static void digi_rx_unthrottle(struct tty_struct *tty); +static void digi_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios); +static void digi_break_ctl(struct tty_struct *tty, int break_state); +static int digi_tiocmget(struct tty_struct *tty); +static int digi_tiocmset(struct tty_struct *tty, unsigned int set, + unsigned int clear); +static int digi_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); +static void digi_write_bulk_callback(struct urb *urb); +static int digi_write_room(struct tty_struct *tty); +static int digi_chars_in_buffer(struct tty_struct *tty); +static int digi_open(struct tty_struct *tty, struct usb_serial_port *port); +static void digi_close(struct usb_serial_port *port); +static void digi_dtr_rts(struct usb_serial_port *port, int on); +static int digi_startup_device(struct usb_serial *serial); +static int digi_startup(struct usb_serial *serial); +static void digi_disconnect(struct usb_serial *serial); +static void digi_release(struct usb_serial *serial); +static int digi_port_probe(struct usb_serial_port *port); +static int digi_port_remove(struct usb_serial_port *port); +static void digi_read_bulk_callback(struct urb *urb); +static int digi_read_inb_callback(struct urb *urb); +static int digi_read_oob_callback(struct urb *urb); + + +static const struct usb_device_id id_table_combined[] = { + { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) }, + { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id id_table_2[] = { + { USB_DEVICE(DIGI_VENDOR_ID, DIGI_2_ID) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id id_table_4[] = { + { USB_DEVICE(DIGI_VENDOR_ID, DIGI_4_ID) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table_combined); + +/* device info needed for the Digi serial converter */ + +static struct usb_serial_driver digi_acceleport_2_device = { + .driver = { + .owner = THIS_MODULE, + .name = "digi_2", + }, + .description = "Digi 2 port USB adapter", + .id_table = id_table_2, + .num_ports = 3, + .open = digi_open, + .close = digi_close, + .dtr_rts = digi_dtr_rts, + .write = digi_write, + .write_room = digi_write_room, + .write_bulk_callback = digi_write_bulk_callback, + .read_bulk_callback = digi_read_bulk_callback, + .chars_in_buffer = digi_chars_in_buffer, + .throttle = digi_rx_throttle, + .unthrottle = digi_rx_unthrottle, + .set_termios = digi_set_termios, + .break_ctl = digi_break_ctl, + .tiocmget = digi_tiocmget, + .tiocmset = digi_tiocmset, + .attach = digi_startup, + .disconnect = digi_disconnect, + .release = digi_release, + .port_probe = digi_port_probe, + .port_remove = digi_port_remove, +}; + +static struct usb_serial_driver digi_acceleport_4_device = { + .driver = { + .owner = THIS_MODULE, + .name = "digi_4", + }, + .description = "Digi 4 port USB adapter", + .id_table = id_table_4, + .num_ports = 4, + .open = digi_open, + .close = digi_close, + .write = digi_write, + .write_room = digi_write_room, + .write_bulk_callback = digi_write_bulk_callback, + .read_bulk_callback = digi_read_bulk_callback, + .chars_in_buffer = digi_chars_in_buffer, + .throttle = digi_rx_throttle, + .unthrottle = digi_rx_unthrottle, + .set_termios = digi_set_termios, + .break_ctl = digi_break_ctl, + .tiocmget = digi_tiocmget, + .tiocmset = digi_tiocmset, + .attach = digi_startup, + .disconnect = digi_disconnect, + .release = digi_release, + .port_probe = digi_port_probe, + .port_remove = digi_port_remove, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &digi_acceleport_2_device, &digi_acceleport_4_device, NULL +}; + +/* Functions */ + +/* + * Cond Wait Interruptible Timeout Irqrestore + * + * Do spin_unlock_irqrestore and interruptible_sleep_on_timeout + * so that wake ups are not lost if they occur between the unlock + * and the sleep. In other words, spin_unlock_irqrestore and + * interruptible_sleep_on_timeout are "atomic" with respect to + * wake ups. This is used to implement condition variables. + * + * interruptible_sleep_on_timeout is deprecated and has been replaced + * with the equivalent code. + */ + +static long cond_wait_interruptible_timeout_irqrestore( + wait_queue_head_t *q, long timeout, + spinlock_t *lock, unsigned long flags) +__releases(lock) +{ + DEFINE_WAIT(wait); + + prepare_to_wait(q, &wait, TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(lock, flags); + timeout = schedule_timeout(timeout); + finish_wait(q, &wait); + + return timeout; +} + + +/* + * Digi Wakeup Write + * + * Wake up port, line discipline, and tty processes sleeping + * on writes. + */ + +static void digi_wakeup_write_lock(struct work_struct *work) +{ + struct digi_port *priv = + container_of(work, struct digi_port, dp_wakeup_work); + struct usb_serial_port *port = priv->dp_port; + unsigned long flags; + + spin_lock_irqsave(&priv->dp_port_lock, flags); + tty_port_tty_wakeup(&port->port); + spin_unlock_irqrestore(&priv->dp_port_lock, flags); +} + +/* + * Digi Write OOB Command + * + * Write commands on the out of band port. Commands are 4 + * bytes each, multiple commands can be sent at once, and + * no command will be split across USB packets. Returns 0 + * if successful, -EINTR if interrupted while sleeping and + * the interruptible flag is true, or a negative error + * returned by usb_submit_urb. + */ + +static int digi_write_oob_command(struct usb_serial_port *port, + unsigned char *buf, int count, int interruptible) +{ + int ret = 0; + int len; + struct usb_serial_port *oob_port = (struct usb_serial_port *)((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port; + struct digi_port *oob_priv = usb_get_serial_port_data(oob_port); + unsigned long flags = 0; + + dev_dbg(&port->dev, + "digi_write_oob_command: TOP: port=%d, count=%d\n", + oob_priv->dp_port_num, count); + + spin_lock_irqsave(&oob_priv->dp_port_lock, flags); + while (count > 0) { + while (oob_priv->dp_write_urb_in_use) { + cond_wait_interruptible_timeout_irqrestore( + &oob_port->write_wait, DIGI_RETRY_TIMEOUT, + &oob_priv->dp_port_lock, flags); + if (interruptible && signal_pending(current)) + return -EINTR; + spin_lock_irqsave(&oob_priv->dp_port_lock, flags); + } + + /* len must be a multiple of 4, so commands are not split */ + len = min(count, oob_port->bulk_out_size); + if (len > 4) + len &= ~3; + memcpy(oob_port->write_urb->transfer_buffer, buf, len); + oob_port->write_urb->transfer_buffer_length = len; + ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC); + if (ret == 0) { + oob_priv->dp_write_urb_in_use = 1; + count -= len; + buf += len; + } + } + spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags); + if (ret) + dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n", + __func__, ret); + return ret; + +} + + +/* + * Digi Write In Band Command + * + * Write commands on the given port. Commands are 4 + * bytes each, multiple commands can be sent at once, and + * no command will be split across USB packets. If timeout + * is non-zero, write in band command will return after + * waiting unsuccessfully for the URB status to clear for + * timeout ticks. Returns 0 if successful, or a negative + * error returned by digi_write. + */ + +static int digi_write_inb_command(struct usb_serial_port *port, + unsigned char *buf, int count, unsigned long timeout) +{ + int ret = 0; + int len; + struct digi_port *priv = usb_get_serial_port_data(port); + unsigned char *data = port->write_urb->transfer_buffer; + unsigned long flags = 0; + + dev_dbg(&port->dev, "digi_write_inb_command: TOP: port=%d, count=%d\n", + priv->dp_port_num, count); + + if (timeout) + timeout += jiffies; + else + timeout = ULONG_MAX; + + spin_lock_irqsave(&priv->dp_port_lock, flags); + while (count > 0 && ret == 0) { + while (priv->dp_write_urb_in_use && + time_before(jiffies, timeout)) { + cond_wait_interruptible_timeout_irqrestore( + &port->write_wait, DIGI_RETRY_TIMEOUT, + &priv->dp_port_lock, flags); + if (signal_pending(current)) + return -EINTR; + spin_lock_irqsave(&priv->dp_port_lock, flags); + } + + /* len must be a multiple of 4 and small enough to */ + /* guarantee the write will send buffered data first, */ + /* so commands are in order with data and not split */ + len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len); + if (len > 4) + len &= ~3; + + /* write any buffered data first */ + if (priv->dp_out_buf_len > 0) { + data[0] = DIGI_CMD_SEND_DATA; + data[1] = priv->dp_out_buf_len; + memcpy(data + 2, priv->dp_out_buf, + priv->dp_out_buf_len); + memcpy(data + 2 + priv->dp_out_buf_len, buf, len); + port->write_urb->transfer_buffer_length + = priv->dp_out_buf_len + 2 + len; + } else { + memcpy(data, buf, len); + port->write_urb->transfer_buffer_length = len; + } + + ret = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (ret == 0) { + priv->dp_write_urb_in_use = 1; + priv->dp_out_buf_len = 0; + count -= len; + buf += len; + } + + } + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + + if (ret) + dev_err(&port->dev, + "%s: usb_submit_urb failed, ret=%d, port=%d\n", + __func__, ret, priv->dp_port_num); + return ret; +} + + +/* + * Digi Set Modem Signals + * + * Sets or clears DTR and RTS on the port, according to the + * modem_signals argument. Use TIOCM_DTR and TIOCM_RTS flags + * for the modem_signals argument. Returns 0 if successful, + * -EINTR if interrupted while sleeping, or a non-zero error + * returned by usb_submit_urb. + */ + +static int digi_set_modem_signals(struct usb_serial_port *port, + unsigned int modem_signals, int interruptible) +{ + + int ret; + struct digi_port *port_priv = usb_get_serial_port_data(port); + struct usb_serial_port *oob_port = (struct usb_serial_port *) ((struct digi_serial *)(usb_get_serial_data(port->serial)))->ds_oob_port; + struct digi_port *oob_priv = usb_get_serial_port_data(oob_port); + unsigned char *data = oob_port->write_urb->transfer_buffer; + unsigned long flags = 0; + + + dev_dbg(&port->dev, + "digi_set_modem_signals: TOP: port=%d, modem_signals=0x%x\n", + port_priv->dp_port_num, modem_signals); + + spin_lock_irqsave(&oob_priv->dp_port_lock, flags); + spin_lock(&port_priv->dp_port_lock); + + while (oob_priv->dp_write_urb_in_use) { + spin_unlock(&port_priv->dp_port_lock); + cond_wait_interruptible_timeout_irqrestore( + &oob_port->write_wait, DIGI_RETRY_TIMEOUT, + &oob_priv->dp_port_lock, flags); + if (interruptible && signal_pending(current)) + return -EINTR; + spin_lock_irqsave(&oob_priv->dp_port_lock, flags); + spin_lock(&port_priv->dp_port_lock); + } + data[0] = DIGI_CMD_SET_DTR_SIGNAL; + data[1] = port_priv->dp_port_num; + data[2] = (modem_signals & TIOCM_DTR) ? + DIGI_DTR_ACTIVE : DIGI_DTR_INACTIVE; + data[3] = 0; + data[4] = DIGI_CMD_SET_RTS_SIGNAL; + data[5] = port_priv->dp_port_num; + data[6] = (modem_signals & TIOCM_RTS) ? + DIGI_RTS_ACTIVE : DIGI_RTS_INACTIVE; + data[7] = 0; + + oob_port->write_urb->transfer_buffer_length = 8; + + ret = usb_submit_urb(oob_port->write_urb, GFP_ATOMIC); + if (ret == 0) { + oob_priv->dp_write_urb_in_use = 1; + port_priv->dp_modem_signals = + (port_priv->dp_modem_signals&~(TIOCM_DTR|TIOCM_RTS)) + | (modem_signals&(TIOCM_DTR|TIOCM_RTS)); + } + spin_unlock(&port_priv->dp_port_lock); + spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags); + if (ret) + dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n", + __func__, ret); + return ret; +} + +/* + * Digi Transmit Idle + * + * Digi transmit idle waits, up to timeout ticks, for the transmitter + * to go idle. It returns 0 if successful or a negative error. + * + * There are race conditions here if more than one process is calling + * digi_transmit_idle on the same port at the same time. However, this + * is only called from close, and only one process can be in close on a + * port at a time, so its ok. + */ + +static int digi_transmit_idle(struct usb_serial_port *port, + unsigned long timeout) +{ + int ret; + unsigned char buf[2]; + struct digi_port *priv = usb_get_serial_port_data(port); + unsigned long flags = 0; + + spin_lock_irqsave(&priv->dp_port_lock, flags); + priv->dp_transmit_idle = 0; + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + + buf[0] = DIGI_CMD_TRANSMIT_IDLE; + buf[1] = 0; + + timeout += jiffies; + + ret = digi_write_inb_command(port, buf, 2, timeout - jiffies); + if (ret != 0) + return ret; + + spin_lock_irqsave(&priv->dp_port_lock, flags); + + while (time_before(jiffies, timeout) && !priv->dp_transmit_idle) { + cond_wait_interruptible_timeout_irqrestore( + &priv->dp_transmit_idle_wait, DIGI_RETRY_TIMEOUT, + &priv->dp_port_lock, flags); + if (signal_pending(current)) + return -EINTR; + spin_lock_irqsave(&priv->dp_port_lock, flags); + } + priv->dp_transmit_idle = 0; + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + return 0; + +} + + +static void digi_rx_throttle(struct tty_struct *tty) +{ + unsigned long flags; + struct usb_serial_port *port = tty->driver_data; + struct digi_port *priv = usb_get_serial_port_data(port); + + /* stop receiving characters by not resubmitting the read urb */ + spin_lock_irqsave(&priv->dp_port_lock, flags); + priv->dp_throttled = 1; + priv->dp_throttle_restart = 0; + spin_unlock_irqrestore(&priv->dp_port_lock, flags); +} + + +static void digi_rx_unthrottle(struct tty_struct *tty) +{ + int ret = 0; + unsigned long flags; + struct usb_serial_port *port = tty->driver_data; + struct digi_port *priv = usb_get_serial_port_data(port); + + spin_lock_irqsave(&priv->dp_port_lock, flags); + + /* restart read chain */ + if (priv->dp_throttle_restart) + ret = usb_submit_urb(port->read_urb, GFP_ATOMIC); + + /* turn throttle off */ + priv->dp_throttled = 0; + priv->dp_throttle_restart = 0; + + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + + if (ret) + dev_err(&port->dev, + "%s: usb_submit_urb failed, ret=%d, port=%d\n", + __func__, ret, priv->dp_port_num); +} + + +static void digi_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + struct digi_port *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; + unsigned int iflag = tty->termios.c_iflag; + unsigned int cflag = tty->termios.c_cflag; + unsigned int old_iflag = old_termios->c_iflag; + unsigned int old_cflag = old_termios->c_cflag; + unsigned char buf[32]; + unsigned int modem_signals; + int arg, ret; + int i = 0; + speed_t baud; + + dev_dbg(dev, + "digi_set_termios: TOP: port=%d, iflag=0x%x, old_iflag=0x%x, cflag=0x%x, old_cflag=0x%x\n", + priv->dp_port_num, iflag, old_iflag, cflag, old_cflag); + + /* set baud rate */ + baud = tty_get_baud_rate(tty); + if (baud != tty_termios_baud_rate(old_termios)) { + arg = -1; + + /* reassert DTR and (maybe) RTS on transition from B0 */ + if ((old_cflag&CBAUD) == B0) { + /* don't set RTS if using hardware flow control */ + /* and throttling input */ + modem_signals = TIOCM_DTR; + if (!(tty->termios.c_cflag & CRTSCTS) || + !test_bit(TTY_THROTTLED, &tty->flags)) + modem_signals |= TIOCM_RTS; + digi_set_modem_signals(port, modem_signals, 1); + } + switch (baud) { + /* drop DTR and RTS on transition to B0 */ + case 0: digi_set_modem_signals(port, 0, 1); break; + case 50: arg = DIGI_BAUD_50; break; + case 75: arg = DIGI_BAUD_75; break; + case 110: arg = DIGI_BAUD_110; break; + case 150: arg = DIGI_BAUD_150; break; + case 200: arg = DIGI_BAUD_200; break; + case 300: arg = DIGI_BAUD_300; break; + case 600: arg = DIGI_BAUD_600; break; + case 1200: arg = DIGI_BAUD_1200; break; + case 1800: arg = DIGI_BAUD_1800; break; + case 2400: arg = DIGI_BAUD_2400; break; + case 4800: arg = DIGI_BAUD_4800; break; + case 9600: arg = DIGI_BAUD_9600; break; + case 19200: arg = DIGI_BAUD_19200; break; + case 38400: arg = DIGI_BAUD_38400; break; + case 57600: arg = DIGI_BAUD_57600; break; + case 115200: arg = DIGI_BAUD_115200; break; + case 230400: arg = DIGI_BAUD_230400; break; + case 460800: arg = DIGI_BAUD_460800; break; + default: + arg = DIGI_BAUD_9600; + baud = 9600; + break; + } + if (arg != -1) { + buf[i++] = DIGI_CMD_SET_BAUD_RATE; + buf[i++] = priv->dp_port_num; + buf[i++] = arg; + buf[i++] = 0; + } + } + /* set parity */ + tty->termios.c_cflag &= ~CMSPAR; + + if ((cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD))) { + if (cflag&PARENB) { + if (cflag&PARODD) + arg = DIGI_PARITY_ODD; + else + arg = DIGI_PARITY_EVEN; + } else { + arg = DIGI_PARITY_NONE; + } + buf[i++] = DIGI_CMD_SET_PARITY; + buf[i++] = priv->dp_port_num; + buf[i++] = arg; + buf[i++] = 0; + } + /* set word size */ + if ((cflag&CSIZE) != (old_cflag&CSIZE)) { + arg = -1; + switch (cflag&CSIZE) { + case CS5: arg = DIGI_WORD_SIZE_5; break; + case CS6: arg = DIGI_WORD_SIZE_6; break; + case CS7: arg = DIGI_WORD_SIZE_7; break; + case CS8: arg = DIGI_WORD_SIZE_8; break; + default: + dev_dbg(dev, + "digi_set_termios: can't handle word size %d\n", + (cflag&CSIZE)); + break; + } + + if (arg != -1) { + buf[i++] = DIGI_CMD_SET_WORD_SIZE; + buf[i++] = priv->dp_port_num; + buf[i++] = arg; + buf[i++] = 0; + } + + } + + /* set stop bits */ + if ((cflag&CSTOPB) != (old_cflag&CSTOPB)) { + + if ((cflag&CSTOPB)) + arg = DIGI_STOP_BITS_2; + else + arg = DIGI_STOP_BITS_1; + + buf[i++] = DIGI_CMD_SET_STOP_BITS; + buf[i++] = priv->dp_port_num; + buf[i++] = arg; + buf[i++] = 0; + + } + + /* set input flow control */ + if ((iflag&IXOFF) != (old_iflag&IXOFF) + || (cflag&CRTSCTS) != (old_cflag&CRTSCTS)) { + arg = 0; + if (iflag&IXOFF) + arg |= DIGI_INPUT_FLOW_CONTROL_XON_XOFF; + else + arg &= ~DIGI_INPUT_FLOW_CONTROL_XON_XOFF; + + if (cflag&CRTSCTS) { + arg |= DIGI_INPUT_FLOW_CONTROL_RTS; + + /* On USB-4 it is necessary to assert RTS prior */ + /* to selecting RTS input flow control. */ + buf[i++] = DIGI_CMD_SET_RTS_SIGNAL; + buf[i++] = priv->dp_port_num; + buf[i++] = DIGI_RTS_ACTIVE; + buf[i++] = 0; + + } else { + arg &= ~DIGI_INPUT_FLOW_CONTROL_RTS; + } + buf[i++] = DIGI_CMD_SET_INPUT_FLOW_CONTROL; + buf[i++] = priv->dp_port_num; + buf[i++] = arg; + buf[i++] = 0; + } + + /* set output flow control */ + if ((iflag & IXON) != (old_iflag & IXON) + || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { + arg = 0; + if (iflag & IXON) + arg |= DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF; + else + arg &= ~DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF; + + if (cflag & CRTSCTS) { + arg |= DIGI_OUTPUT_FLOW_CONTROL_CTS; + } else { + arg &= ~DIGI_OUTPUT_FLOW_CONTROL_CTS; + } + + buf[i++] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL; + buf[i++] = priv->dp_port_num; + buf[i++] = arg; + buf[i++] = 0; + } + + /* set receive enable/disable */ + if ((cflag & CREAD) != (old_cflag & CREAD)) { + if (cflag & CREAD) + arg = DIGI_ENABLE; + else + arg = DIGI_DISABLE; + + buf[i++] = DIGI_CMD_RECEIVE_ENABLE; + buf[i++] = priv->dp_port_num; + buf[i++] = arg; + buf[i++] = 0; + } + ret = digi_write_oob_command(port, buf, i, 1); + if (ret != 0) + dev_dbg(dev, "digi_set_termios: write oob failed, ret=%d\n", ret); + tty_encode_baud_rate(tty, baud, baud); +} + + +static void digi_break_ctl(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned char buf[4]; + + buf[0] = DIGI_CMD_BREAK_CONTROL; + buf[1] = 2; /* length */ + buf[2] = break_state ? 1 : 0; + buf[3] = 0; /* pad */ + digi_write_inb_command(port, buf, 4, 0); +} + + +static int digi_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct digi_port *priv = usb_get_serial_port_data(port); + unsigned int val; + unsigned long flags; + + spin_lock_irqsave(&priv->dp_port_lock, flags); + val = priv->dp_modem_signals; + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + return val; +} + + +static int digi_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct digi_port *priv = usb_get_serial_port_data(port); + unsigned int val; + unsigned long flags; + + spin_lock_irqsave(&priv->dp_port_lock, flags); + val = (priv->dp_modem_signals & ~clear) | set; + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + return digi_set_modem_signals(port, val, 1); +} + + +static int digi_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + + int ret, data_len, new_len; + struct digi_port *priv = usb_get_serial_port_data(port); + unsigned char *data = port->write_urb->transfer_buffer; + unsigned long flags = 0; + + dev_dbg(&port->dev, + "digi_write: TOP: port=%d, count=%d, in_interrupt=%ld\n", + priv->dp_port_num, count, in_interrupt()); + + /* copy user data (which can sleep) before getting spin lock */ + count = min(count, port->bulk_out_size-2); + count = min(64, count); + + /* be sure only one write proceeds at a time */ + /* there are races on the port private buffer */ + spin_lock_irqsave(&priv->dp_port_lock, flags); + + /* wait for urb status clear to submit another urb */ + if (priv->dp_write_urb_in_use) { + /* buffer data if count is 1 (probably put_char) if possible */ + if (count == 1 && priv->dp_out_buf_len < DIGI_OUT_BUF_SIZE) { + priv->dp_out_buf[priv->dp_out_buf_len++] = *buf; + new_len = 1; + } else { + new_len = 0; + } + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + return new_len; + } + + /* allow space for any buffered data and for new data, up to */ + /* transfer buffer size - 2 (for command and length bytes) */ + new_len = min(count, port->bulk_out_size-2-priv->dp_out_buf_len); + data_len = new_len + priv->dp_out_buf_len; + + if (data_len == 0) { + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + return 0; + } + + port->write_urb->transfer_buffer_length = data_len+2; + + *data++ = DIGI_CMD_SEND_DATA; + *data++ = data_len; + + /* copy in buffered data first */ + memcpy(data, priv->dp_out_buf, priv->dp_out_buf_len); + data += priv->dp_out_buf_len; + + /* copy in new data */ + memcpy(data, buf, new_len); + + ret = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (ret == 0) { + priv->dp_write_urb_in_use = 1; + ret = new_len; + priv->dp_out_buf_len = 0; + } + + /* return length of new data written, or error */ + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + if (ret < 0) + dev_err_console(port, + "%s: usb_submit_urb failed, ret=%d, port=%d\n", + __func__, ret, priv->dp_port_num); + dev_dbg(&port->dev, "digi_write: returning %d\n", ret); + return ret; + +} + +static void digi_write_bulk_callback(struct urb *urb) +{ + + struct usb_serial_port *port = urb->context; + struct usb_serial *serial; + struct digi_port *priv; + struct digi_serial *serial_priv; + int ret = 0; + int status = urb->status; + + /* port and serial sanity check */ + if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) { + pr_err("%s: port or port->private is NULL, status=%d\n", + __func__, status); + return; + } + serial = port->serial; + if (serial == NULL || (serial_priv = usb_get_serial_data(serial)) == NULL) { + dev_err(&port->dev, + "%s: serial or serial->private is NULL, status=%d\n", + __func__, status); + return; + } + + /* handle oob callback */ + if (priv->dp_port_num == serial_priv->ds_oob_port_num) { + dev_dbg(&port->dev, "digi_write_bulk_callback: oob callback\n"); + spin_lock(&priv->dp_port_lock); + priv->dp_write_urb_in_use = 0; + wake_up_interruptible(&port->write_wait); + spin_unlock(&priv->dp_port_lock); + return; + } + + /* try to send any buffered data on this port */ + spin_lock(&priv->dp_port_lock); + priv->dp_write_urb_in_use = 0; + if (priv->dp_out_buf_len > 0) { + *((unsigned char *)(port->write_urb->transfer_buffer)) + = (unsigned char)DIGI_CMD_SEND_DATA; + *((unsigned char *)(port->write_urb->transfer_buffer) + 1) + = (unsigned char)priv->dp_out_buf_len; + port->write_urb->transfer_buffer_length = + priv->dp_out_buf_len + 2; + memcpy(port->write_urb->transfer_buffer + 2, priv->dp_out_buf, + priv->dp_out_buf_len); + ret = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (ret == 0) { + priv->dp_write_urb_in_use = 1; + priv->dp_out_buf_len = 0; + } + } + /* wake up processes sleeping on writes immediately */ + tty_port_tty_wakeup(&port->port); + /* also queue up a wakeup at scheduler time, in case we */ + /* lost the race in write_chan(). */ + schedule_work(&priv->dp_wakeup_work); + + spin_unlock(&priv->dp_port_lock); + if (ret && ret != -EPERM) + dev_err_console(port, + "%s: usb_submit_urb failed, ret=%d, port=%d\n", + __func__, ret, priv->dp_port_num); +} + +static int digi_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct digi_port *priv = usb_get_serial_port_data(port); + int room; + unsigned long flags = 0; + + spin_lock_irqsave(&priv->dp_port_lock, flags); + + if (priv->dp_write_urb_in_use) + room = 0; + else + room = port->bulk_out_size - 2 - priv->dp_out_buf_len; + + spin_unlock_irqrestore(&priv->dp_port_lock, flags); + dev_dbg(&port->dev, "digi_write_room: port=%d, room=%d\n", priv->dp_port_num, room); + return room; + +} + +static int digi_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct digi_port *priv = usb_get_serial_port_data(port); + + if (priv->dp_write_urb_in_use) { + dev_dbg(&port->dev, "digi_chars_in_buffer: port=%d, chars=%d\n", + priv->dp_port_num, port->bulk_out_size - 2); + /* return(port->bulk_out_size - 2); */ + return 256; + } else { + dev_dbg(&port->dev, "digi_chars_in_buffer: port=%d, chars=%d\n", + priv->dp_port_num, priv->dp_out_buf_len); + return priv->dp_out_buf_len; + } + +} + +static void digi_dtr_rts(struct usb_serial_port *port, int on) +{ + /* Adjust DTR and RTS */ + digi_set_modem_signals(port, on * (TIOCM_DTR|TIOCM_RTS), 1); +} + +static int digi_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + int ret; + unsigned char buf[32]; + struct digi_port *priv = usb_get_serial_port_data(port); + struct ktermios not_termios; + + /* be sure the device is started up */ + if (digi_startup_device(port->serial) != 0) + return -ENXIO; + + /* read modem signals automatically whenever they change */ + buf[0] = DIGI_CMD_READ_INPUT_SIGNALS; + buf[1] = priv->dp_port_num; + buf[2] = DIGI_ENABLE; + buf[3] = 0; + + /* flush fifos */ + buf[4] = DIGI_CMD_IFLUSH_FIFO; + buf[5] = priv->dp_port_num; + buf[6] = DIGI_FLUSH_TX | DIGI_FLUSH_RX; + buf[7] = 0; + + ret = digi_write_oob_command(port, buf, 8, 1); + if (ret != 0) + dev_dbg(&port->dev, "digi_open: write oob failed, ret=%d\n", ret); + + /* set termios settings */ + if (tty) { + not_termios.c_cflag = ~tty->termios.c_cflag; + not_termios.c_iflag = ~tty->termios.c_iflag; + digi_set_termios(tty, port, ¬_termios); + } + return 0; +} + + +static void digi_close(struct usb_serial_port *port) +{ + DEFINE_WAIT(wait); + int ret; + unsigned char buf[32]; + struct digi_port *priv = usb_get_serial_port_data(port); + + mutex_lock(&port->serial->disc_mutex); + /* if disconnected, just clear flags */ + if (port->serial->disconnected) + goto exit; + + /* FIXME: Transmit idle belongs in the wait_unti_sent path */ + digi_transmit_idle(port, DIGI_CLOSE_TIMEOUT); + + /* disable input flow control */ + buf[0] = DIGI_CMD_SET_INPUT_FLOW_CONTROL; + buf[1] = priv->dp_port_num; + buf[2] = DIGI_DISABLE; + buf[3] = 0; + + /* disable output flow control */ + buf[4] = DIGI_CMD_SET_OUTPUT_FLOW_CONTROL; + buf[5] = priv->dp_port_num; + buf[6] = DIGI_DISABLE; + buf[7] = 0; + + /* disable reading modem signals automatically */ + buf[8] = DIGI_CMD_READ_INPUT_SIGNALS; + buf[9] = priv->dp_port_num; + buf[10] = DIGI_DISABLE; + buf[11] = 0; + + /* disable receive */ + buf[12] = DIGI_CMD_RECEIVE_ENABLE; + buf[13] = priv->dp_port_num; + buf[14] = DIGI_DISABLE; + buf[15] = 0; + + /* flush fifos */ + buf[16] = DIGI_CMD_IFLUSH_FIFO; + buf[17] = priv->dp_port_num; + buf[18] = DIGI_FLUSH_TX | DIGI_FLUSH_RX; + buf[19] = 0; + + ret = digi_write_oob_command(port, buf, 20, 0); + if (ret != 0) + dev_dbg(&port->dev, "digi_close: write oob failed, ret=%d\n", + ret); + /* wait for final commands on oob port to complete */ + prepare_to_wait(&priv->dp_flush_wait, &wait, + TASK_INTERRUPTIBLE); + schedule_timeout(DIGI_CLOSE_TIMEOUT); + finish_wait(&priv->dp_flush_wait, &wait); + + /* shutdown any outstanding bulk writes */ + usb_kill_urb(port->write_urb); +exit: + spin_lock_irq(&priv->dp_port_lock); + priv->dp_write_urb_in_use = 0; + wake_up_interruptible(&priv->dp_close_wait); + spin_unlock_irq(&priv->dp_port_lock); + mutex_unlock(&port->serial->disc_mutex); +} + + +/* + * Digi Startup Device + * + * Starts reads on all ports. Must be called AFTER startup, with + * urbs initialized. Returns 0 if successful, non-zero error otherwise. + */ + +static int digi_startup_device(struct usb_serial *serial) +{ + int i, ret = 0; + struct digi_serial *serial_priv = usb_get_serial_data(serial); + struct usb_serial_port *port; + + /* be sure this happens exactly once */ + spin_lock(&serial_priv->ds_serial_lock); + if (serial_priv->ds_device_started) { + spin_unlock(&serial_priv->ds_serial_lock); + return 0; + } + serial_priv->ds_device_started = 1; + spin_unlock(&serial_priv->ds_serial_lock); + + /* start reading from each bulk in endpoint for the device */ + /* set USB_DISABLE_SPD flag for write bulk urbs */ + for (i = 0; i < serial->type->num_ports + 1; i++) { + port = serial->port[i]; + ret = usb_submit_urb(port->read_urb, GFP_KERNEL); + if (ret != 0) { + dev_err(&port->dev, + "%s: usb_submit_urb failed, ret=%d, port=%d\n", + __func__, ret, i); + break; + } + } + return ret; +} + +static int digi_port_init(struct usb_serial_port *port, unsigned port_num) +{ + struct digi_port *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->dp_port_lock); + priv->dp_port_num = port_num; + init_waitqueue_head(&priv->dp_transmit_idle_wait); + init_waitqueue_head(&priv->dp_flush_wait); + init_waitqueue_head(&priv->dp_close_wait); + INIT_WORK(&priv->dp_wakeup_work, digi_wakeup_write_lock); + priv->dp_port = port; + + init_waitqueue_head(&port->write_wait); + + usb_set_serial_port_data(port, priv); + + return 0; +} + +static int digi_startup(struct usb_serial *serial) +{ + struct digi_serial *serial_priv; + int ret; + + serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL); + if (!serial_priv) + return -ENOMEM; + + spin_lock_init(&serial_priv->ds_serial_lock); + serial_priv->ds_oob_port_num = serial->type->num_ports; + serial_priv->ds_oob_port = serial->port[serial_priv->ds_oob_port_num]; + + ret = digi_port_init(serial_priv->ds_oob_port, + serial_priv->ds_oob_port_num); + if (ret) { + kfree(serial_priv); + return ret; + } + + usb_set_serial_data(serial, serial_priv); + + return 0; +} + + +static void digi_disconnect(struct usb_serial *serial) +{ + int i; + + /* stop reads and writes on all ports */ + for (i = 0; i < serial->type->num_ports + 1; i++) { + usb_kill_urb(serial->port[i]->read_urb); + usb_kill_urb(serial->port[i]->write_urb); + } +} + + +static void digi_release(struct usb_serial *serial) +{ + struct digi_serial *serial_priv; + struct digi_port *priv; + + serial_priv = usb_get_serial_data(serial); + + priv = usb_get_serial_port_data(serial_priv->ds_oob_port); + kfree(priv); + + kfree(serial_priv); +} + +static int digi_port_probe(struct usb_serial_port *port) +{ + return digi_port_init(port, port->port_number); +} + +static int digi_port_remove(struct usb_serial_port *port) +{ + struct digi_port *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} + +static void digi_read_bulk_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct digi_port *priv; + struct digi_serial *serial_priv; + int ret; + int status = urb->status; + + /* port sanity check, do not resubmit if port is not valid */ + if (port == NULL) + return; + priv = usb_get_serial_port_data(port); + if (priv == NULL) { + dev_err(&port->dev, "%s: port->private is NULL, status=%d\n", + __func__, status); + return; + } + if (port->serial == NULL || + (serial_priv = usb_get_serial_data(port->serial)) == NULL) { + dev_err(&port->dev, "%s: serial is bad or serial->private " + "is NULL, status=%d\n", __func__, status); + return; + } + + /* do not resubmit urb if it has any status error */ + if (status) { + dev_err(&port->dev, + "%s: nonzero read bulk status: status=%d, port=%d\n", + __func__, status, priv->dp_port_num); + return; + } + + /* handle oob or inb callback, do not resubmit if error */ + if (priv->dp_port_num == serial_priv->ds_oob_port_num) { + if (digi_read_oob_callback(urb) != 0) + return; + } else { + if (digi_read_inb_callback(urb) != 0) + return; + } + + /* continue read */ + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret != 0 && ret != -EPERM) { + dev_err(&port->dev, + "%s: failed resubmitting urb, ret=%d, port=%d\n", + __func__, ret, priv->dp_port_num); + } + +} + +/* + * Digi Read INB Callback + * + * Digi Read INB Callback handles reads on the in band ports, sending + * the data on to the tty subsystem. When called we know port and + * port->private are not NULL and port->serial has been validated. + * It returns 0 if successful, 1 if successful but the port is + * throttled, and -1 if the sanity checks failed. + */ + +static int digi_read_inb_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct digi_port *priv = usb_get_serial_port_data(port); + int opcode = ((unsigned char *)urb->transfer_buffer)[0]; + int len = ((unsigned char *)urb->transfer_buffer)[1]; + int port_status = ((unsigned char *)urb->transfer_buffer)[2]; + unsigned char *data = ((unsigned char *)urb->transfer_buffer) + 3; + int flag, throttled; + int status = urb->status; + + /* do not process callbacks on closed ports */ + /* but do continue the read chain */ + if (urb->status == -ENOENT) + return 0; + + /* short/multiple packet check */ + if (urb->actual_length != len + 2) { + dev_err(&port->dev, "%s: INCOMPLETE OR MULTIPLE PACKET, " + "status=%d, port=%d, opcode=%d, len=%d, " + "actual_length=%d, status=%d\n", __func__, status, + priv->dp_port_num, opcode, len, urb->actual_length, + port_status); + return -1; + } + + spin_lock(&priv->dp_port_lock); + + /* check for throttle; if set, do not resubmit read urb */ + /* indicate the read chain needs to be restarted on unthrottle */ + throttled = priv->dp_throttled; + if (throttled) + priv->dp_throttle_restart = 1; + + /* receive data */ + if (opcode == DIGI_CMD_RECEIVE_DATA) { + /* get flag from port_status */ + flag = 0; + + /* overrun is special, not associated with a char */ + if (port_status & DIGI_OVERRUN_ERROR) + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); + + /* break takes precedence over parity, */ + /* which takes precedence over framing errors */ + if (port_status & DIGI_BREAK_ERROR) + flag = TTY_BREAK; + else if (port_status & DIGI_PARITY_ERROR) + flag = TTY_PARITY; + else if (port_status & DIGI_FRAMING_ERROR) + flag = TTY_FRAME; + + /* data length is len-1 (one byte of len is port_status) */ + --len; + if (len > 0) { + tty_insert_flip_string_fixed_flag(&port->port, data, + flag, len); + tty_flip_buffer_push(&port->port); + } + } + spin_unlock(&priv->dp_port_lock); + + if (opcode == DIGI_CMD_RECEIVE_DISABLE) + dev_dbg(&port->dev, "%s: got RECEIVE_DISABLE\n", __func__); + else if (opcode != DIGI_CMD_RECEIVE_DATA) + dev_dbg(&port->dev, "%s: unknown opcode: %d\n", __func__, opcode); + + return throttled ? 1 : 0; + +} + + +/* + * Digi Read OOB Callback + * + * Digi Read OOB Callback handles reads on the out of band port. + * When called we know port and port->private are not NULL and + * the port->serial is valid. It returns 0 if successful, and + * -1 if the sanity checks failed. + */ + +static int digi_read_oob_callback(struct urb *urb) +{ + + struct usb_serial_port *port = urb->context; + struct usb_serial *serial = port->serial; + struct tty_struct *tty; + struct digi_port *priv = usb_get_serial_port_data(port); + int opcode, line, status, val; + int i; + unsigned int rts; + + /* handle each oob command */ + for (i = 0; i < urb->actual_length - 3;) { + opcode = ((unsigned char *)urb->transfer_buffer)[i++]; + line = ((unsigned char *)urb->transfer_buffer)[i++]; + status = ((unsigned char *)urb->transfer_buffer)[i++]; + val = ((unsigned char *)urb->transfer_buffer)[i++]; + + dev_dbg(&port->dev, "digi_read_oob_callback: opcode=%d, line=%d, status=%d, val=%d\n", + opcode, line, status, val); + + if (status != 0 || line >= serial->type->num_ports) + continue; + + port = serial->port[line]; + + priv = usb_get_serial_port_data(port); + if (priv == NULL) + return -1; + + tty = tty_port_tty_get(&port->port); + + rts = 0; + if (tty) + rts = tty->termios.c_cflag & CRTSCTS; + + if (tty && opcode == DIGI_CMD_READ_INPUT_SIGNALS) { + spin_lock(&priv->dp_port_lock); + /* convert from digi flags to termiox flags */ + if (val & DIGI_READ_INPUT_SIGNALS_CTS) { + priv->dp_modem_signals |= TIOCM_CTS; + /* port must be open to use tty struct */ + if (rts) + tty_port_tty_wakeup(&port->port); + } else { + priv->dp_modem_signals &= ~TIOCM_CTS; + /* port must be open to use tty struct */ + } + if (val & DIGI_READ_INPUT_SIGNALS_DSR) + priv->dp_modem_signals |= TIOCM_DSR; + else + priv->dp_modem_signals &= ~TIOCM_DSR; + if (val & DIGI_READ_INPUT_SIGNALS_RI) + priv->dp_modem_signals |= TIOCM_RI; + else + priv->dp_modem_signals &= ~TIOCM_RI; + if (val & DIGI_READ_INPUT_SIGNALS_DCD) + priv->dp_modem_signals |= TIOCM_CD; + else + priv->dp_modem_signals &= ~TIOCM_CD; + + spin_unlock(&priv->dp_port_lock); + } else if (opcode == DIGI_CMD_TRANSMIT_IDLE) { + spin_lock(&priv->dp_port_lock); + priv->dp_transmit_idle = 1; + wake_up_interruptible(&priv->dp_transmit_idle_wait); + spin_unlock(&priv->dp_port_lock); + } else if (opcode == DIGI_CMD_IFLUSH_FIFO) { + wake_up_interruptible(&priv->dp_flush_wait); + } + tty_kref_put(tty); + } + return 0; + +} + +module_usb_serial_driver(serial_drivers, id_table_combined); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/empeg.c b/kernel/drivers/usb/serial/empeg.c new file mode 100644 index 000000000..90e603d5f --- /dev/null +++ b/kernel/drivers/usb/serial/empeg.c @@ -0,0 +1,129 @@ +/* + * USB Empeg empeg-car player driver + * + * Copyright (C) 2000, 2001 + * Gary Brubaker (xavyer@ix.netcom.com) + * + * Copyright (C) 1999 - 2001 + * Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, as published by + * the Free Software Foundation, version 2. + * + * See Documentation/usb/usb-serial.txt for more information on using this + * driver + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Gary Brubaker <xavyer@ix.netcom.com>" +#define DRIVER_DESC "USB Empeg Mark I/II Driver" + +#define EMPEG_VENDOR_ID 0x084f +#define EMPEG_PRODUCT_ID 0x0001 + +/* function prototypes for an empeg-car player */ +static int empeg_startup(struct usb_serial *serial); +static void empeg_init_termios(struct tty_struct *tty); + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(EMPEG_VENDOR_ID, EMPEG_PRODUCT_ID) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_serial_driver empeg_device = { + .driver = { + .owner = THIS_MODULE, + .name = "empeg", + }, + .id_table = id_table, + .num_ports = 1, + .bulk_out_size = 256, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, + .attach = empeg_startup, + .init_termios = empeg_init_termios, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &empeg_device, NULL +}; + +static int empeg_startup(struct usb_serial *serial) +{ + int r; + + if (serial->dev->actconfig->desc.bConfigurationValue != 1) { + dev_err(&serial->dev->dev, "active config #%d != 1 ??\n", + serial->dev->actconfig->desc.bConfigurationValue); + return -ENODEV; + } + + r = usb_reset_configuration(serial->dev); + + /* continue on with initialization */ + return r; +} + +static void empeg_init_termios(struct tty_struct *tty) +{ + struct ktermios *termios = &tty->termios; + + /* + * The empeg-car player wants these particular tty settings. + * You could, for example, change the baud rate, however the + * player only supports 115200 (currently), so there is really + * no point in support for changes to the tty settings. + * (at least for now) + * + * The default requirements for this device are: + */ + termios->c_iflag + &= ~(IGNBRK /* disable ignore break */ + | BRKINT /* disable break causes interrupt */ + | PARMRK /* disable mark parity errors */ + | ISTRIP /* disable clear high bit of input characters */ + | INLCR /* disable translate NL to CR */ + | IGNCR /* disable ignore CR */ + | ICRNL /* disable translate CR to NL */ + | IXON); /* disable enable XON/XOFF flow control */ + + termios->c_oflag + &= ~OPOST; /* disable postprocess output characters */ + + termios->c_lflag + &= ~(ECHO /* disable echo input characters */ + | ECHONL /* disable echo new line */ + | ICANON /* disable erase, kill, werase, and rprnt special characters */ + | ISIG /* disable interrupt, quit, and suspend special characters */ + | IEXTEN); /* disable non-POSIX special characters */ + + termios->c_cflag + &= ~(CSIZE /* no size */ + | PARENB /* disable parity bit */ + | CBAUD); /* clear current baud rate */ + + termios->c_cflag + |= CS8; /* character size 8 bits */ + + tty_encode_baud_rate(tty, 115200, 115200); +} + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/ezusb_convert.pl b/kernel/drivers/usb/serial/ezusb_convert.pl new file mode 100644 index 000000000..13f114691 --- /dev/null +++ b/kernel/drivers/usb/serial/ezusb_convert.pl @@ -0,0 +1,50 @@ +#! /usr/bin/perl -w + + +# convert an Intel HEX file into a set of C records usable by the firmware +# loading code in usb-serial.c (or others) + +# accepts the .hex file(s) on stdin, a basename (to name the initialized +# array) as an argument, and prints the .h file to stdout. Typical usage: +# perl ezusb_convert.pl foo <foo.hex >fw_foo.h + + +my $basename = $ARGV[0]; +die "no base name specified" unless $basename; + +while (<STDIN>) { + # ':' <len> <addr> <type> <len-data> <crc> '\r' + # len, type, crc are 2-char hex, addr is 4-char hex. type is 00 for + # normal records, 01 for EOF + my($lenstring, $addrstring, $typestring, $reststring, $doscrap) = + /^:(\w\w)(\w\w\w\w)(\w\w)(\w+)(\r?)$/; + die "malformed line: $_" unless $reststring; + last if $typestring eq '01'; + my($len) = hex($lenstring); + my($addr) = hex($addrstring); + my(@bytes) = unpack("C*", pack("H".(2*$len), $reststring)); + #pop(@bytes); # last byte is a CRC + push(@records, [$addr, \@bytes]); +} + +@sorted_records = sort { $a->[0] <=> $b->[0] } @records; + +print <<"EOF"; +/* + * ${basename}_fw.h + * + * Generated from ${basename}.s by ezusb_convert.pl + * This file is presumed to be under the same copyright as the source file + * from which it was derived. + */ + +EOF + +print "static const struct ezusb_hex_record ${basename}_firmware[] = {\n"; +foreach $r (@sorted_records) { + printf("{ 0x%04x,\t%d,\t{", $r->[0], scalar(@{$r->[1]})); + print join(", ", map {sprintf('0x%02x', $_);} @{$r->[1]}); + print "} },\n"; +} +print "{ 0xffff,\t0,\t{0x00} }\n"; +print "};\n"; diff --git a/kernel/drivers/usb/serial/f81232.c b/kernel/drivers/usb/serial/f81232.c new file mode 100644 index 000000000..972f5a5fe --- /dev/null +++ b/kernel/drivers/usb/serial/f81232.c @@ -0,0 +1,694 @@ +/* + * Fintek F81232 USB to serial adaptor driver + * + * Copyright (C) 2012 Greg Kroah-Hartman (gregkh@linuxfoundation.org) + * Copyright (C) 2012 Linux Foundation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/serial.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/serial_reg.h> + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(0x1934, 0x0706) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* Maximum baudrate for F81232 */ +#define F81232_MAX_BAUDRATE 115200 + +/* USB Control EP parameter */ +#define F81232_REGISTER_REQUEST 0xa0 +#define F81232_GET_REGISTER 0xc0 +#define F81232_SET_REGISTER 0x40 + +#define SERIAL_BASE_ADDRESS 0x0120 +#define RECEIVE_BUFFER_REGISTER (0x00 + SERIAL_BASE_ADDRESS) +#define INTERRUPT_ENABLE_REGISTER (0x01 + SERIAL_BASE_ADDRESS) +#define FIFO_CONTROL_REGISTER (0x02 + SERIAL_BASE_ADDRESS) +#define LINE_CONTROL_REGISTER (0x03 + SERIAL_BASE_ADDRESS) +#define MODEM_CONTROL_REGISTER (0x04 + SERIAL_BASE_ADDRESS) +#define MODEM_STATUS_REGISTER (0x06 + SERIAL_BASE_ADDRESS) + +struct f81232_private { + struct mutex lock; + u8 modem_control; + u8 modem_status; + struct work_struct interrupt_work; + struct usb_serial_port *port; +}; + +static int calc_baud_divisor(speed_t baudrate) +{ + return DIV_ROUND_CLOSEST(F81232_MAX_BAUDRATE, baudrate); +} + +static int f81232_get_register(struct usb_serial_port *port, u16 reg, u8 *val) +{ + int status; + u8 *tmp; + struct usb_device *dev = port->serial->dev; + + tmp = kmalloc(sizeof(*val), GFP_KERNEL); + if (!tmp) + return -ENOMEM; + + status = usb_control_msg(dev, + usb_rcvctrlpipe(dev, 0), + F81232_REGISTER_REQUEST, + F81232_GET_REGISTER, + reg, + 0, + tmp, + sizeof(*val), + USB_CTRL_GET_TIMEOUT); + if (status != sizeof(*val)) { + dev_err(&port->dev, "%s failed status: %d\n", __func__, status); + + if (status < 0) + status = usb_translate_errors(status); + else + status = -EIO; + } else { + status = 0; + *val = *tmp; + } + + kfree(tmp); + return status; +} + +static int f81232_set_register(struct usb_serial_port *port, u16 reg, u8 val) +{ + int status; + u8 *tmp; + struct usb_device *dev = port->serial->dev; + + tmp = kmalloc(sizeof(val), GFP_KERNEL); + if (!tmp) + return -ENOMEM; + + *tmp = val; + + status = usb_control_msg(dev, + usb_sndctrlpipe(dev, 0), + F81232_REGISTER_REQUEST, + F81232_SET_REGISTER, + reg, + 0, + tmp, + sizeof(val), + USB_CTRL_SET_TIMEOUT); + if (status != sizeof(val)) { + dev_err(&port->dev, "%s failed status: %d\n", __func__, status); + + if (status < 0) + status = usb_translate_errors(status); + else + status = -EIO; + } else { + status = 0; + } + + kfree(tmp); + return status; +} + +static void f81232_read_msr(struct usb_serial_port *port) +{ + int status; + u8 current_msr; + struct tty_struct *tty; + struct f81232_private *priv = usb_get_serial_port_data(port); + + mutex_lock(&priv->lock); + status = f81232_get_register(port, MODEM_STATUS_REGISTER, + ¤t_msr); + if (status) { + dev_err(&port->dev, "%s fail, status: %d\n", __func__, status); + mutex_unlock(&priv->lock); + return; + } + + if (!(current_msr & UART_MSR_ANY_DELTA)) { + mutex_unlock(&priv->lock); + return; + } + + priv->modem_status = current_msr; + + if (current_msr & UART_MSR_DCTS) + port->icount.cts++; + if (current_msr & UART_MSR_DDSR) + port->icount.dsr++; + if (current_msr & UART_MSR_TERI) + port->icount.rng++; + if (current_msr & UART_MSR_DDCD) { + port->icount.dcd++; + tty = tty_port_tty_get(&port->port); + if (tty) { + usb_serial_handle_dcd_change(port, tty, + current_msr & UART_MSR_DCD); + + tty_kref_put(tty); + } + } + + wake_up_interruptible(&port->port.delta_msr_wait); + mutex_unlock(&priv->lock); +} + +static int f81232_set_mctrl(struct usb_serial_port *port, + unsigned int set, unsigned int clear) +{ + u8 val; + int status; + struct f81232_private *priv = usb_get_serial_port_data(port); + + if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) + return 0; /* no change */ + + /* 'set' takes precedence over 'clear' */ + clear &= ~set; + + /* force enable interrupt with OUT2 */ + mutex_lock(&priv->lock); + val = UART_MCR_OUT2 | priv->modem_control; + + if (clear & TIOCM_DTR) + val &= ~UART_MCR_DTR; + + if (clear & TIOCM_RTS) + val &= ~UART_MCR_RTS; + + if (set & TIOCM_DTR) + val |= UART_MCR_DTR; + + if (set & TIOCM_RTS) + val |= UART_MCR_RTS; + + dev_dbg(&port->dev, "%s new:%02x old:%02x\n", __func__, + val, priv->modem_control); + + status = f81232_set_register(port, MODEM_CONTROL_REGISTER, val); + if (status) { + dev_err(&port->dev, "%s set MCR status < 0\n", __func__); + mutex_unlock(&priv->lock); + return status; + } + + priv->modem_control = val; + mutex_unlock(&priv->lock); + + return 0; +} + +static void f81232_update_line_status(struct usb_serial_port *port, + unsigned char *data, + size_t actual_length) +{ + struct f81232_private *priv = usb_get_serial_port_data(port); + + if (!actual_length) + return; + + switch (data[0] & 0x07) { + case 0x00: /* msr change */ + dev_dbg(&port->dev, "IIR: MSR Change: %02x\n", data[0]); + schedule_work(&priv->interrupt_work); + break; + case 0x02: /* tx-empty */ + break; + case 0x04: /* rx data available */ + break; + case 0x06: /* lsr change */ + /* we can forget it. the LSR will read from bulk-in */ + dev_dbg(&port->dev, "IIR: LSR Change: %02x\n", data[0]); + break; + } +} + +static void f81232_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + unsigned int actual_length = urb->actual_length; + int status = urb->status; + int retval; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", + __func__, status); + goto exit; + } + + usb_serial_debug_data(&port->dev, __func__, + urb->actual_length, urb->transfer_buffer); + + f81232_update_line_status(port, data, actual_length); + +exit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + dev_err(&urb->dev->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, retval); +} + +static void f81232_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + char tty_flag; + unsigned int i; + u8 lsr; + + /* + * When opening the port we get a 1-byte packet with the current LSR, + * which we discard. + */ + if ((urb->actual_length < 2) || (urb->actual_length % 2)) + return; + + /* bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]... */ + + for (i = 0; i < urb->actual_length; i += 2) { + tty_flag = TTY_NORMAL; + lsr = data[i]; + + if (lsr & UART_LSR_BRK_ERROR_BITS) { + if (lsr & UART_LSR_BI) { + tty_flag = TTY_BREAK; + port->icount.brk++; + usb_serial_handle_break(port); + } else if (lsr & UART_LSR_PE) { + tty_flag = TTY_PARITY; + port->icount.parity++; + } else if (lsr & UART_LSR_FE) { + tty_flag = TTY_FRAME; + port->icount.frame++; + } + + if (lsr & UART_LSR_OE) { + port->icount.overrun++; + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } + } + + if (port->port.console && port->sysrq) { + if (usb_serial_handle_sysrq_char(port, data[i + 1])) + continue; + } + + tty_insert_flip_char(&port->port, data[i + 1], tty_flag); + } + + tty_flip_buffer_push(&port->port); +} + +static void f81232_break_ctl(struct tty_struct *tty, int break_state) +{ + /* FIXME - Stubbed out for now */ + + /* + * break_state = -1 to turn on break, and 0 to turn off break + * see drivers/char/tty_io.c to see it used. + * last_set_data_urb_value NEVER has the break bit set in it. + */ +} + +static void f81232_set_baudrate(struct usb_serial_port *port, speed_t baudrate) +{ + u8 lcr; + int divisor; + int status = 0; + + divisor = calc_baud_divisor(baudrate); + + status = f81232_get_register(port, LINE_CONTROL_REGISTER, + &lcr); /* get LCR */ + if (status) { + dev_err(&port->dev, "%s failed to get LCR: %d\n", + __func__, status); + return; + } + + status = f81232_set_register(port, LINE_CONTROL_REGISTER, + lcr | UART_LCR_DLAB); /* Enable DLAB */ + if (status) { + dev_err(&port->dev, "%s failed to set DLAB: %d\n", + __func__, status); + return; + } + + status = f81232_set_register(port, RECEIVE_BUFFER_REGISTER, + divisor & 0x00ff); /* low */ + if (status) { + dev_err(&port->dev, "%s failed to set baudrate MSB: %d\n", + __func__, status); + goto reapply_lcr; + } + + status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, + (divisor & 0xff00) >> 8); /* high */ + if (status) { + dev_err(&port->dev, "%s failed to set baudrate LSB: %d\n", + __func__, status); + } + +reapply_lcr: + status = f81232_set_register(port, LINE_CONTROL_REGISTER, + lcr & ~UART_LCR_DLAB); + if (status) { + dev_err(&port->dev, "%s failed to set DLAB: %d\n", + __func__, status); + } +} + +static int f81232_port_enable(struct usb_serial_port *port) +{ + u8 val; + int status; + + /* fifo on, trigger8, clear TX/RX*/ + val = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT; + + status = f81232_set_register(port, FIFO_CONTROL_REGISTER, val); + if (status) { + dev_err(&port->dev, "%s failed to set FCR: %d\n", + __func__, status); + return status; + } + + /* MSR Interrupt only, LSR will read from Bulk-in odd byte */ + status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, + UART_IER_MSI); + if (status) { + dev_err(&port->dev, "%s failed to set IER: %d\n", + __func__, status); + return status; + } + + return 0; +} + +static int f81232_port_disable(struct usb_serial_port *port) +{ + int status; + + status = f81232_set_register(port, INTERRUPT_ENABLE_REGISTER, 0); + if (status) { + dev_err(&port->dev, "%s failed to set IER: %d\n", + __func__, status); + return status; + } + + return 0; +} + +static void f81232_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + u8 new_lcr = 0; + int status = 0; + speed_t baudrate; + + /* Don't change anything if nothing has changed */ + if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) + return; + + if (C_BAUD(tty) == B0) + f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS); + else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) + f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0); + + baudrate = tty_get_baud_rate(tty); + if (baudrate > 0) { + if (baudrate > F81232_MAX_BAUDRATE) { + baudrate = F81232_MAX_BAUDRATE; + tty_encode_baud_rate(tty, baudrate, baudrate); + } + f81232_set_baudrate(port, baudrate); + } + + if (C_PARENB(tty)) { + new_lcr |= UART_LCR_PARITY; + + if (!C_PARODD(tty)) + new_lcr |= UART_LCR_EPAR; + + if (C_CMSPAR(tty)) + new_lcr |= UART_LCR_SPAR; + } + + if (C_CSTOPB(tty)) + new_lcr |= UART_LCR_STOP; + + switch (C_CSIZE(tty)) { + case CS5: + new_lcr |= UART_LCR_WLEN5; + break; + case CS6: + new_lcr |= UART_LCR_WLEN6; + break; + case CS7: + new_lcr |= UART_LCR_WLEN7; + break; + default: + case CS8: + new_lcr |= UART_LCR_WLEN8; + break; + } + + status = f81232_set_register(port, LINE_CONTROL_REGISTER, new_lcr); + if (status) { + dev_err(&port->dev, "%s failed to set LCR: %d\n", + __func__, status); + } +} + +static int f81232_tiocmget(struct tty_struct *tty) +{ + int r; + struct usb_serial_port *port = tty->driver_data; + struct f81232_private *port_priv = usb_get_serial_port_data(port); + u8 mcr, msr; + + /* force get current MSR changed state */ + f81232_read_msr(port); + + mutex_lock(&port_priv->lock); + mcr = port_priv->modem_control; + msr = port_priv->modem_status; + mutex_unlock(&port_priv->lock); + + r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) | + (mcr & UART_MCR_RTS ? TIOCM_RTS : 0) | + (msr & UART_MSR_CTS ? TIOCM_CTS : 0) | + (msr & UART_MSR_DCD ? TIOCM_CAR : 0) | + (msr & UART_MSR_RI ? TIOCM_RI : 0) | + (msr & UART_MSR_DSR ? TIOCM_DSR : 0); + + return r; +} + +static int f81232_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + + return f81232_set_mctrl(port, set, clear); +} + +static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + int result; + + result = f81232_port_enable(port); + if (result) + return result; + + /* Setup termios */ + if (tty) + f81232_set_termios(tty, port, NULL); + + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result) { + dev_err(&port->dev, "%s - failed submitting interrupt urb," + " error %d\n", __func__, result); + return result; + } + + result = usb_serial_generic_open(tty, port); + if (result) { + usb_kill_urb(port->interrupt_in_urb); + return result; + } + + return 0; +} + +static void f81232_close(struct usb_serial_port *port) +{ + f81232_port_disable(port); + usb_serial_generic_close(port); + usb_kill_urb(port->interrupt_in_urb); +} + +static void f81232_dtr_rts(struct usb_serial_port *port, int on) +{ + if (on) + f81232_set_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0); + else + f81232_set_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS); +} + +static int f81232_carrier_raised(struct usb_serial_port *port) +{ + u8 msr; + struct f81232_private *priv = usb_get_serial_port_data(port); + + mutex_lock(&priv->lock); + msr = priv->modem_status; + mutex_unlock(&priv->lock); + + if (msr & UART_MSR_DCD) + return 1; + return 0; +} + +static int f81232_get_serial_info(struct usb_serial_port *port, + unsigned long arg) +{ + struct serial_struct ser; + + memset(&ser, 0, sizeof(ser)); + + ser.type = PORT_16550A; + ser.line = port->minor; + ser.port = port->port_number; + ser.baud_base = F81232_MAX_BAUDRATE; + + if (copy_to_user((void __user *)arg, &ser, sizeof(ser))) + return -EFAULT; + + return 0; +} + +static int f81232_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + + switch (cmd) { + case TIOCGSERIAL: + return f81232_get_serial_info(port, arg); + default: + break; + } + return -ENOIOCTLCMD; +} + +static void f81232_interrupt_work(struct work_struct *work) +{ + struct f81232_private *priv = + container_of(work, struct f81232_private, interrupt_work); + + f81232_read_msr(priv->port); +} + +static int f81232_port_probe(struct usb_serial_port *port) +{ + struct f81232_private *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mutex_init(&priv->lock); + INIT_WORK(&priv->interrupt_work, f81232_interrupt_work); + + usb_set_serial_port_data(port, priv); + + port->port.drain_delay = 256; + priv->port = port; + + return 0; +} + +static int f81232_port_remove(struct usb_serial_port *port) +{ + struct f81232_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} + +static struct usb_serial_driver f81232_device = { + .driver = { + .owner = THIS_MODULE, + .name = "f81232", + }, + .id_table = id_table, + .num_ports = 1, + .bulk_in_size = 256, + .bulk_out_size = 256, + .open = f81232_open, + .close = f81232_close, + .dtr_rts = f81232_dtr_rts, + .carrier_raised = f81232_carrier_raised, + .ioctl = f81232_ioctl, + .break_ctl = f81232_break_ctl, + .set_termios = f81232_set_termios, + .tiocmget = f81232_tiocmget, + .tiocmset = f81232_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .process_read_urb = f81232_process_read_urb, + .read_int_callback = f81232_read_int_callback, + .port_probe = f81232_port_probe, + .port_remove = f81232_port_remove, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &f81232_device, + NULL, +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_DESCRIPTION("Fintek F81232 USB to serial adaptor driver"); +MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org>"); +MODULE_AUTHOR("Peter Hong <peter_hong@fintek.com.tw>"); +MODULE_LICENSE("GPL v2"); diff --git a/kernel/drivers/usb/serial/ftdi_sio.c b/kernel/drivers/usb/serial/ftdi_sio.c new file mode 100644 index 000000000..4c8b3b821 --- /dev/null +++ b/kernel/drivers/usb/serial/ftdi_sio.c @@ -0,0 +1,2501 @@ +/* + * USB FTDI SIO driver + * + * Copyright (C) 2009 - 2013 + * Johan Hovold (jhovold@gmail.com) + * Copyright (C) 1999 - 2001 + * Greg Kroah-Hartman (greg@kroah.com) + * Bill Ryder (bryder@sgi.com) + * Copyright (C) 2002 + * Kuba Ober (kuba@mareimbrium.org) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * See Documentation/usb/usb-serial.txt for more information on using this + * driver + * + * See http://ftdi-usb-sio.sourceforge.net for up to date testing info + * and extra documentation + * + * Change entries from 2004 and earlier can be found in versions of this + * file in kernel versions prior to the 2.6.24 release. + * + */ + +/* Bill Ryder - bryder@sgi.com - wrote the FTDI_SIO implementation */ +/* Thanx to FTDI for so kindly providing details of the protocol required */ +/* to talk to the device */ +/* Thanx to gkh and the rest of the usb dev group for all code I have + assimilated :-) */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/serial.h> +#include <linux/usb/serial.h> +#include "ftdi_sio.h" +#include "ftdi_sio_ids.h" + +#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr, Johan Hovold <jhovold@gmail.com>" +#define DRIVER_DESC "USB FTDI Serial Converters Driver" + + +struct ftdi_private { + enum ftdi_chip_type chip_type; + /* type of device, either SIO or FT8U232AM */ + int baud_base; /* baud base clock for divisor setting */ + int custom_divisor; /* custom_divisor kludge, this is for + baud_base (different from what goes to the + chip!) */ + __u16 last_set_data_urb_value ; + /* the last data state set - needed for doing + * a break + */ + int flags; /* some ASYNC_xxxx flags are supported */ + unsigned long last_dtr_rts; /* saved modem control outputs */ + char prev_status; /* Used for TIOCMIWAIT */ + char transmit_empty; /* If transmitter is empty or not */ + __u16 interface; /* FT2232C, FT2232H or FT4232H port interface + (0 for FT232/245) */ + + speed_t force_baud; /* if non-zero, force the baud rate to + this value */ + int force_rtscts; /* if non-zero, force RTS-CTS to always + be enabled */ + + unsigned int latency; /* latency setting in use */ + unsigned short max_packet_size; + struct mutex cfg_lock; /* Avoid mess by parallel calls of config ioctl() and change_speed() */ +}; + +/* struct ftdi_sio_quirk is used by devices requiring special attention. */ +struct ftdi_sio_quirk { + int (*probe)(struct usb_serial *); + /* Special settings for probed ports. */ + void (*port_probe)(struct ftdi_private *); +}; + +static int ftdi_jtag_probe(struct usb_serial *serial); +static int ftdi_NDI_device_setup(struct usb_serial *serial); +static int ftdi_stmclite_probe(struct usb_serial *serial); +static int ftdi_8u2232c_probe(struct usb_serial *serial); +static void ftdi_USB_UIRT_setup(struct ftdi_private *priv); +static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv); + +static struct ftdi_sio_quirk ftdi_jtag_quirk = { + .probe = ftdi_jtag_probe, +}; + +static struct ftdi_sio_quirk ftdi_NDI_device_quirk = { + .probe = ftdi_NDI_device_setup, +}; + +static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = { + .port_probe = ftdi_USB_UIRT_setup, +}; + +static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { + .port_probe = ftdi_HE_TIRA1_setup, +}; + +static struct ftdi_sio_quirk ftdi_stmclite_quirk = { + .probe = ftdi_stmclite_probe, +}; + +static struct ftdi_sio_quirk ftdi_8u2232c_quirk = { + .probe = ftdi_8u2232c_probe, +}; + +/* + * The 8U232AM has the same API as the sio except for: + * - it can support MUCH higher baudrates; up to: + * o 921600 for RS232 and 2000000 for RS422/485 at 48MHz + * o 230400 at 12MHz + * so .. 8U232AM's baudrate setting codes are different + * - it has a two byte status code. + * - it returns characters every 16ms (the FTDI does it every 40ms) + * + * the bcdDevice value is used to differentiate FT232BM and FT245BM from + * the earlier FT8U232AM and FT8U232BM. For now, include all known VID/PID + * combinations in both tables. + * FIXME: perhaps bcdDevice can also identify 12MHz FT8U232AM devices, + * but I don't know if those ever went into mass production. [Ian Abbott] + */ + + + +/* + * Device ID not listed? Test it using + * /sys/bus/usb-serial/drivers/ftdi_sio/new_id and send a patch or report. + */ +static const struct usb_device_id id_table_combined[] = { + { USB_DEVICE(FTDI_VID, FTDI_BRICK_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_BM_ATOM_NANO_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_EV3CON_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_3_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_4_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_USINT_CAT_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_USINT_WKEY_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_USINT_RS232_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_IPLUS2_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_DMX4ALL) }, + { USB_DEVICE(FTDI_VID, FTDI_SIO_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_232RL_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) , + .driver_info = (kernel_ulong_t)&ftdi_8u2232c_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_4232H_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_232H_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_FTX_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_SNIFFER_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_THROTTLE_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GATEWAY_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_GBM_BOOST_PID) }, + { USB_DEVICE(NEWPORT_VID, NEWPORT_AGILIS_PID) }, + { USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_CC_PID) }, + { USB_DEVICE(NEWPORT_VID, NEWPORT_CONEX_AGP_PID) }, + { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, + { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) }, + { USB_DEVICE(FTDI_VID, FTDI_TAGSYS_LP101_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TAGSYS_P200X_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_LENZ_LIUSB_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_XF_547_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_XF_633_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_XF_631_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_XF_635_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_XF_640_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_XF_642_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_DSS20_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_URBAN_0_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_URBAN_1_PID) }, + { USB_DEVICE(FTDI_NF_RIC_VID, FTDI_NF_RIC_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_VNHCPCUSB_D_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MTXORB_0_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MTXORB_1_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MTXORB_2_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MTXORB_3_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) }, + { USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0103_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0104_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0105_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0106_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0107_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0108_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0109_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_010F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0110_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0111_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0112_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0113_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0114_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0115_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0116_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0117_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0118_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0119_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_011F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0120_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0121_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0122_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0123_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0124_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0125_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0126_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0127_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0128_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0129_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_012F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0130_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0131_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0132_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0133_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0134_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0135_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0136_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0137_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0138_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0139_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_013F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0140_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0141_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0142_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0143_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0144_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0145_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0146_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0147_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0148_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0149_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_014F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0150_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0151_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0152_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0153_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0154_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0155_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0156_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0157_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0158_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0159_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_015F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0160_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0161_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0162_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0163_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0164_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0165_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0166_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0167_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0168_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0169_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_016F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0170_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0171_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0172_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0173_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0174_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0175_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0176_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0177_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0178_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0179_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_017F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0180_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0181_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0182_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0183_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0184_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0185_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0186_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0187_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0188_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0189_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_018F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0190_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0191_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0192_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0193_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0194_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0195_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0196_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0197_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0198_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0199_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_019F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A0_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A1_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A2_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A3_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A4_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A5_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A6_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A7_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A8_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01A9_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AA_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AB_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AC_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AD_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AE_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01AF_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B0_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B1_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B2_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B3_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B4_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B5_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B6_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B7_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B8_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01B9_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BA_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BB_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BC_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BD_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BE_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01BF_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C0_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C1_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C2_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C3_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C4_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C5_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C6_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C7_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C8_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01C9_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CA_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CB_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CC_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CD_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CE_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01CF_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D0_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D1_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D2_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D3_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D4_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D5_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D6_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D7_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D8_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01D9_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DA_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DB_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DC_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DD_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DE_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01DF_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E0_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E1_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E2_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E3_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E4_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E5_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E6_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E7_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E8_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01E9_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EA_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EB_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EC_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01ED_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EE_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01EF_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F0_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F1_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F2_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F3_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F4_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F5_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F6_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F7_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F8_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01F9_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FA_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FB_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FC_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_4701_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9300_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9301_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9302_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9303_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9304_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9305_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9306_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9307_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9308_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9309_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930F_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9310_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9311_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9312_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9313_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9314_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9315_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9316_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9317_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9318_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9319_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931A_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931B_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931C_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931D_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931E_PID) }, + { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931F_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_USBX_707_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2104_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2106_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_1_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2201_2_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_1_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2202_2_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_1_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2203_2_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_1_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_2_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_3_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2401_4_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_1_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_2_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_3_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2402_4_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_1_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_2_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_3_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2403_4_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_1_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_2_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_3_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_4_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_5_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_6_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_7_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2801_8_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_1_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_2_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_3_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_4_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_5_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_6_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_7_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2802_8_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_1_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_2_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_3_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_4_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_5_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_6_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_1_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_2_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_3_PID) }, + { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803R_4_PID) }, + { USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) }, + { USB_DEVICE(OCT_VID, OCT_US101_PID) }, + { USB_DEVICE(OCT_VID, OCT_DK201_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID), + .driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID), + .driver_info = (kernel_ulong_t)&ftdi_USB_UIRT_quirk }, + { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) }, + { USB_DEVICE(FTDI_VID, PROTEGO_R2X0) }, + { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) }, + { USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_4) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E808_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E809_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80A_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80B_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80C_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80D_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80E_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E80F_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E888_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E889_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88A_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88B_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88C_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88D_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88E_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GUDEADS_E88F_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UR100_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_ALC8500_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PYRAMID_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1000PC_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_IBS_US485_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_IBS_PICPRO_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_IBS_PCMCIA_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_IBS_PK1_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_IBS_RS232MON_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_IBS_APP70_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TIAO_UMPA_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLXM_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_SYNAPSE_SS200_PID) }, + /* + * ELV devices: + */ + { USB_DEVICE(FTDI_ELV_VID, FTDI_ELV_WS300_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UDF77_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UIO88_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UAD8_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UDA7_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_USI2_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_T1100_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_PCD200_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_ULA200_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_CSI8_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1000DL_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) }, + { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) }, + { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) }, + { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) }, + { USB_DEVICE(FTDI_VID, LINX_FUTURE_1_PID) }, + { USB_DEVICE(FTDI_VID, LINX_FUTURE_2_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSLOAD_N_GO_3_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSICDU64_4_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CCSPRIME8_5_PID) }, + { USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) }, + { USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) }, + { USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) }, + { USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) }, + { USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) }, + { USB_DEVICE(TTI_VID, TTI_QL355P_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) }, + { USB_DEVICE(ACTON_VID, ACTON_SPECTRAPRO_PID) }, + { USB_DEVICE(CONTEC_VID, CONTEC_COM1USBH_PID) }, + { USB_DEVICE(MITSUBISHI_VID, MITSUBISHI_FXUSB_PID) }, + { USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) }, + { USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) }, + { USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) }, + { USB_DEVICE(BANDB_VID, BANDB_USOPTL4_PID) }, + { USB_DEVICE(BANDB_VID, BANDB_USPTL4_PID) }, + { USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_2_PID) }, + { USB_DEVICE(BANDB_VID, BANDB_USO9ML2DR_PID) }, + { USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR2_PID) }, + { USB_DEVICE(BANDB_VID, BANDB_USOPTL4DR_PID) }, + { USB_DEVICE(BANDB_VID, BANDB_485USB9F_2W_PID) }, + { USB_DEVICE(BANDB_VID, BANDB_485USB9F_4W_PID) }, + { USB_DEVICE(BANDB_VID, BANDB_232USB9M_PID) }, + { USB_DEVICE(BANDB_VID, BANDB_485USBTB_2W_PID) }, + { USB_DEVICE(BANDB_VID, BANDB_485USBTB_4W_PID) }, + { USB_DEVICE(BANDB_VID, BANDB_TTL5USB9M_PID) }, + { USB_DEVICE(BANDB_VID, BANDB_TTL3USB9M_PID) }, + { USB_DEVICE(BANDB_VID, BANDB_ZZ_PROG1_USB_PID) }, + { USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) }, + { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_3_PID) }, + { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) }, + { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) }, + { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) }, + { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_3_PID) }, + { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_4_PID) }, + { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) }, + { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) }, + { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) }, + { USB_DEVICE(XSENS_VID, XSENS_AWINDA_DONGLE_PID) }, + { USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) }, + { USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) }, + { USB_DEVICE(XSENS_VID, XSENS_MTDEVBOARD_PID) }, + { USB_DEVICE(XSENS_VID, XSENS_MTW_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_OMNI1509) }, + { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) }, + { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) }, + { USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) }, + { USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HR_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16HRC_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16IC_PID) }, + { USB_DEVICE(KOBIL_VID, KOBIL_CONV_B1_PID) }, + { USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) }, + { USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TTUSB_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ECLO_COM_1WIRE_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_NZR_SEM_USB_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C2_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2D_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VT_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VR_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVT_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVR_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVT_PID) }, + { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVR_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) }, + { USB_DEVICE(TESTO_VID, TESTO_1_PID) }, + { USB_DEVICE(TESTO_VID, TESTO_3_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) }, + { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID), + .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_NDI_SPECTRA_SCU_PID), + .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_2_PID), + .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_3_PID), + .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID), + .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, + { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) }, + { USB_DEVICE(NOVITUS_VID, NOVITUS_BONO_E_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S03_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_59_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57A_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57B_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29A_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29B_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29F_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_62B_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S01_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_63_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29C_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_81B_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_82B_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K5D_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K4Y_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K5G_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S05_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_60_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_61_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_62_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_63B_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_64_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_65_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_92_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_92D_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_W5R_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_A5R_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_PW1_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) }, + { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) }, + { USB_DEVICE(FTDI_VID, CYBER_CORTEX_AV_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, + { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, + + /* Papouch devices based on FTDI chip */ + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485_2_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AP485_2_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB422_2_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485S_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB485C_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_LEC_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SB232_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_IRAMP_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK5_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO8x8_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x2_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO10x1_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO30x3_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO60x3_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO2x16_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO3x32_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_DRAK6_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_UPSUSB_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_MU_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_SIMUKEY_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMUX_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_GMSR_PID) }, + + { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, + { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) }, + { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) }, + { USB_DEVICE(ATMEL_VID, STK541_PID) }, + { USB_DEVICE(DE_VID, STB_PID) }, + { USB_DEVICE(DE_VID, WHT_PID) }, + { USB_DEVICE(ADI_VID, ADI_GNICE_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID, + USB_CLASS_VENDOR_SPEC, + USB_SUBCLASS_VENDOR_SPEC, 0x00) }, + { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, + { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) }, + { USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) }, + { USB_DEVICE(FTDI_VID, PI_C865_PID) }, + { USB_DEVICE(FTDI_VID, PI_C857_PID) }, + { USB_DEVICE(PI_VID, PI_C866_PID) }, + { USB_DEVICE(PI_VID, PI_C663_PID) }, + { USB_DEVICE(PI_VID, PI_C725_PID) }, + { USB_DEVICE(PI_VID, PI_E517_PID) }, + { USB_DEVICE(PI_VID, PI_C863_PID) }, + { USB_DEVICE(PI_VID, PI_E861_PID) }, + { USB_DEVICE(PI_VID, PI_C867_PID) }, + { USB_DEVICE(PI_VID, PI_E609_PID) }, + { USB_DEVICE(PI_VID, PI_E709_PID) }, + { USB_DEVICE(PI_VID, PI_100F_PID) }, + { USB_DEVICE(PI_VID, PI_1011_PID) }, + { USB_DEVICE(PI_VID, PI_1012_PID) }, + { USB_DEVICE(PI_VID, PI_1013_PID) }, + { USB_DEVICE(PI_VID, PI_1014_PID) }, + { USB_DEVICE(PI_VID, PI_1015_PID) }, + { USB_DEVICE(PI_VID, PI_1016_PID) }, + { USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) }, + { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) }, + { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, TI_XDS100V2_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) }, + { USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) }, + { USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) }, + { USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) }, + { USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) }, + { USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) }, + { USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) }, + { USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) }, + { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) }, + { USB_DEVICE(FTDI_VID, ACCESIO_COM4SM_PID) }, + { USB_DEVICE(IONICS_VID, IONICS_PLUGCOMPUTER_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_24_MASTER_WING_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_PC_WING_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_USB_DMX_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MIDI_TIMECODE_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MINI_WING_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MAXI_WING_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MEDIA_WING_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_WING_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) }, + { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(ST_VID, ST_STMCLT_2232_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(ST_VID, ST_STMCLT_4232_PID), + .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_RF_R106) }, + { USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) }, + /* Crucible Devices */ + { USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_Z3X_PID) }, + /* Cressi Devices */ + { USB_DEVICE(FTDI_VID, FTDI_CRESSI_PID) }, + /* Brainboxes Devices */ + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_001_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_012_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_023_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_VX_034_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_101_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_1_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_2_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_3_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_4_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_5_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_6_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_7_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_160_8_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_257_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_1_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_2_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_3_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_279_4_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_313_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_324_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_346_1_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_346_2_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_357_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_1_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_2_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_606_3_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_701_1_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_701_2_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_1_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_2_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_3_PID) }, + { USB_DEVICE(BRAINBOXES_VID, BRAINBOXES_US_842_4_PID) }, + /* ekey Devices */ + { USB_DEVICE(FTDI_VID, FTDI_EKEY_CONV_USB_PID) }, + /* Infineon Devices */ + { USB_DEVICE_INTERFACE_NUMBER(INFINEON_VID, INFINEON_TRIBOARD_PID, 1) }, + /* GE Healthcare devices */ + { USB_DEVICE(GE_HEALTHCARE_VID, GE_HEALTHCARE_NEMO_TRACKER_PID) }, + /* Active Research (Actisense) devices */ + { USB_DEVICE(FTDI_VID, ACTISENSE_NDC_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_USG_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_NGT_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_NGW_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_D9AC_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_D9AD_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_D9AE_PID) }, + { USB_DEVICE(FTDI_VID, ACTISENSE_D9AF_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEAGAUGE_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASWITCH_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_NMEA2000_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ETHERNET_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_WIFI_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_DISPLAY_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_LITE_PID) }, + { USB_DEVICE(FTDI_VID, CHETCO_SEASMART_ANALOG_PID) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table_combined); + +static const char *ftdi_chip_name[] = { + [SIO] = "SIO", /* the serial part of FT8U100AX */ + [FT8U232AM] = "FT8U232AM", + [FT232BM] = "FT232BM", + [FT2232C] = "FT2232C", + [FT232RL] = "FT232RL", + [FT2232H] = "FT2232H", + [FT4232H] = "FT4232H", + [FT232H] = "FT232H", + [FTX] = "FT-X" +}; + + +/* Used for TIOCMIWAIT */ +#define FTDI_STATUS_B0_MASK (FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD) +#define FTDI_STATUS_B1_MASK (FTDI_RS_BI) +/* End TIOCMIWAIT */ + +/* function prototypes for a FTDI serial converter */ +static int ftdi_sio_probe(struct usb_serial *serial, + const struct usb_device_id *id); +static int ftdi_sio_port_probe(struct usb_serial_port *port); +static int ftdi_sio_port_remove(struct usb_serial_port *port); +static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port); +static void ftdi_dtr_rts(struct usb_serial_port *port, int on); +static void ftdi_process_read_urb(struct urb *urb); +static int ftdi_prepare_write_buffer(struct usb_serial_port *port, + void *dest, size_t size); +static void ftdi_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); +static int ftdi_tiocmget(struct tty_struct *tty); +static int ftdi_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +static int ftdi_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg); +static void ftdi_break_ctl(struct tty_struct *tty, int break_state); +static bool ftdi_tx_empty(struct usb_serial_port *port); +static int ftdi_get_modem_status(struct usb_serial_port *port, + unsigned char status[2]); + +static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base); +static unsigned short int ftdi_232am_baud_to_divisor(int baud); +static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base); +static __u32 ftdi_232bm_baud_to_divisor(int baud); +static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base); +static __u32 ftdi_2232h_baud_to_divisor(int baud); + +static struct usb_serial_driver ftdi_sio_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ftdi_sio", + }, + .description = "FTDI USB Serial Device", + .id_table = id_table_combined, + .num_ports = 1, + .bulk_in_size = 512, + .bulk_out_size = 256, + .probe = ftdi_sio_probe, + .port_probe = ftdi_sio_port_probe, + .port_remove = ftdi_sio_port_remove, + .open = ftdi_open, + .dtr_rts = ftdi_dtr_rts, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, + .process_read_urb = ftdi_process_read_urb, + .prepare_write_buffer = ftdi_prepare_write_buffer, + .tiocmget = ftdi_tiocmget, + .tiocmset = ftdi_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, + .ioctl = ftdi_ioctl, + .set_termios = ftdi_set_termios, + .break_ctl = ftdi_break_ctl, + .tx_empty = ftdi_tx_empty, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &ftdi_sio_device, NULL +}; + + +#define WDR_TIMEOUT 5000 /* default urb timeout */ +#define WDR_SHORT_TIMEOUT 1000 /* shorter urb timeout */ + +/* + * *************************************************************************** + * Utility functions + * *************************************************************************** + */ + +static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base) +{ + unsigned short int divisor; + /* divisor shifted 3 bits to the left */ + int divisor3 = base / 2 / baud; + if ((divisor3 & 0x7) == 7) + divisor3++; /* round x.7/8 up to x+1 */ + divisor = divisor3 >> 3; + divisor3 &= 0x7; + if (divisor3 == 1) + divisor |= 0xc000; + else if (divisor3 >= 4) + divisor |= 0x4000; + else if (divisor3 != 0) + divisor |= 0x8000; + else if (divisor == 1) + divisor = 0; /* special case for maximum baud rate */ + return divisor; +} + +static unsigned short int ftdi_232am_baud_to_divisor(int baud) +{ + return ftdi_232am_baud_base_to_divisor(baud, 48000000); +} + +static __u32 ftdi_232bm_baud_base_to_divisor(int baud, int base) +{ + static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 }; + __u32 divisor; + /* divisor shifted 3 bits to the left */ + int divisor3 = base / 2 / baud; + divisor = divisor3 >> 3; + divisor |= (__u32)divfrac[divisor3 & 0x7] << 14; + /* Deal with special cases for highest baud rates. */ + if (divisor == 1) + divisor = 0; + else if (divisor == 0x4001) + divisor = 1; + return divisor; +} + +static __u32 ftdi_232bm_baud_to_divisor(int baud) +{ + return ftdi_232bm_baud_base_to_divisor(baud, 48000000); +} + +static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base) +{ + static const unsigned char divfrac[8] = { 0, 3, 2, 4, 1, 5, 6, 7 }; + __u32 divisor; + int divisor3; + + /* hi-speed baud rate is 10-bit sampling instead of 16-bit */ + divisor3 = base * 8 / (baud * 10); + + divisor = divisor3 >> 3; + divisor |= (__u32)divfrac[divisor3 & 0x7] << 14; + /* Deal with special cases for highest baud rates. */ + if (divisor == 1) + divisor = 0; + else if (divisor == 0x4001) + divisor = 1; + /* + * Set this bit to turn off a divide by 2.5 on baud rate generator + * This enables baud rates up to 12Mbaud but cannot reach below 1200 + * baud with this bit set + */ + divisor |= 0x00020000; + return divisor; +} + +static __u32 ftdi_2232h_baud_to_divisor(int baud) +{ + return ftdi_2232h_baud_base_to_divisor(baud, 120000000); +} + +#define set_mctrl(port, set) update_mctrl((port), (set), 0) +#define clear_mctrl(port, clear) update_mctrl((port), 0, (clear)) + +static int update_mctrl(struct usb_serial_port *port, unsigned int set, + unsigned int clear) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; + unsigned urb_value; + int rv; + + if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) { + dev_dbg(dev, "%s - DTR|RTS not being set|cleared\n", __func__); + return 0; /* no change */ + } + + clear &= ~set; /* 'set' takes precedence over 'clear' */ + urb_value = 0; + if (clear & TIOCM_DTR) + urb_value |= FTDI_SIO_SET_DTR_LOW; + if (clear & TIOCM_RTS) + urb_value |= FTDI_SIO_SET_RTS_LOW; + if (set & TIOCM_DTR) + urb_value |= FTDI_SIO_SET_DTR_HIGH; + if (set & TIOCM_RTS) + urb_value |= FTDI_SIO_SET_RTS_HIGH; + rv = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + FTDI_SIO_SET_MODEM_CTRL_REQUEST, + FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE, + urb_value, priv->interface, + NULL, 0, WDR_TIMEOUT); + if (rv < 0) { + dev_dbg(dev, "%s Error from MODEM_CTRL urb: DTR %s, RTS %s\n", + __func__, + (set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged", + (set & TIOCM_RTS) ? "HIGH" : (clear & TIOCM_RTS) ? "LOW" : "unchanged"); + rv = usb_translate_errors(rv); + } else { + dev_dbg(dev, "%s - DTR %s, RTS %s\n", __func__, + (set & TIOCM_DTR) ? "HIGH" : (clear & TIOCM_DTR) ? "LOW" : "unchanged", + (set & TIOCM_RTS) ? "HIGH" : (clear & TIOCM_RTS) ? "LOW" : "unchanged"); + /* FIXME: locking on last_dtr_rts */ + priv->last_dtr_rts = (priv->last_dtr_rts & ~clear) | set; + } + return rv; +} + + +static __u32 get_ftdi_divisor(struct tty_struct *tty, + struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; + __u32 div_value = 0; + int div_okay = 1; + int baud; + + /* + * The logic involved in setting the baudrate can be cleanly split into + * 3 steps. + * 1. Standard baud rates are set in tty->termios->c_cflag + * 2. If these are not enough, you can set any speed using alt_speed as + * follows: + * - set tty->termios->c_cflag speed to B38400 + * - set your real speed in tty->alt_speed; it gets ignored when + * alt_speed==0, (or) + * - call TIOCSSERIAL ioctl with (struct serial_struct) set as + * follows: + * flags & ASYNC_SPD_MASK == ASYNC_SPD_[HI, VHI, SHI, WARP], + * this just sets alt_speed to (HI: 57600, VHI: 115200, + * SHI: 230400, WARP: 460800) + * ** Steps 1, 2 are done courtesy of tty_get_baud_rate + * 3. You can also set baud rate by setting custom divisor as follows + * - set tty->termios->c_cflag speed to B38400 + * - call TIOCSSERIAL ioctl with (struct serial_struct) set as + * follows: + * o flags & ASYNC_SPD_MASK == ASYNC_SPD_CUST + * o custom_divisor set to baud_base / your_new_baudrate + * ** Step 3 is done courtesy of code borrowed from serial.c + * I should really spend some time and separate + move this common + * code to serial.c, it is replicated in nearly every serial driver + * you see. + */ + + /* 1. Get the baud rate from the tty settings, this observes + alt_speed hack */ + + baud = tty_get_baud_rate(tty); + dev_dbg(dev, "%s - tty_get_baud_rate reports speed %d\n", __func__, baud); + + /* 2. Observe async-compatible custom_divisor hack, update baudrate + if needed */ + + if (baud == 38400 && + ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && + (priv->custom_divisor)) { + baud = priv->baud_base / priv->custom_divisor; + dev_dbg(dev, "%s - custom divisor %d sets baud rate to %d\n", + __func__, priv->custom_divisor, baud); + } + + /* 3. Convert baudrate to device-specific divisor */ + + if (!baud) + baud = 9600; + switch (priv->chip_type) { + case SIO: /* SIO chip */ + switch (baud) { + case 300: div_value = ftdi_sio_b300; break; + case 600: div_value = ftdi_sio_b600; break; + case 1200: div_value = ftdi_sio_b1200; break; + case 2400: div_value = ftdi_sio_b2400; break; + case 4800: div_value = ftdi_sio_b4800; break; + case 9600: div_value = ftdi_sio_b9600; break; + case 19200: div_value = ftdi_sio_b19200; break; + case 38400: div_value = ftdi_sio_b38400; break; + case 57600: div_value = ftdi_sio_b57600; break; + case 115200: div_value = ftdi_sio_b115200; break; + } /* baud */ + if (div_value == 0) { + dev_dbg(dev, "%s - Baudrate (%d) requested is not supported\n", + __func__, baud); + div_value = ftdi_sio_b9600; + baud = 9600; + div_okay = 0; + } + break; + case FT8U232AM: /* 8U232AM chip */ + if (baud <= 3000000) { + div_value = ftdi_232am_baud_to_divisor(baud); + } else { + dev_dbg(dev, "%s - Baud rate too high!\n", __func__); + baud = 9600; + div_value = ftdi_232am_baud_to_divisor(9600); + div_okay = 0; + } + break; + case FT232BM: /* FT232BM chip */ + case FT2232C: /* FT2232C chip */ + case FT232RL: /* FT232RL chip */ + case FTX: /* FT-X series */ + if (baud <= 3000000) { + __u16 product_id = le16_to_cpu( + port->serial->dev->descriptor.idProduct); + if (((FTDI_NDI_HUC_PID == product_id) || + (FTDI_NDI_SPECTRA_SCU_PID == product_id) || + (FTDI_NDI_FUTURE_2_PID == product_id) || + (FTDI_NDI_FUTURE_3_PID == product_id) || + (FTDI_NDI_AURORA_SCU_PID == product_id)) && + (baud == 19200)) { + baud = 1200000; + } + div_value = ftdi_232bm_baud_to_divisor(baud); + } else { + dev_dbg(dev, "%s - Baud rate too high!\n", __func__); + div_value = ftdi_232bm_baud_to_divisor(9600); + div_okay = 0; + baud = 9600; + } + break; + case FT2232H: /* FT2232H chip */ + case FT4232H: /* FT4232H chip */ + case FT232H: /* FT232H chip */ + if ((baud <= 12000000) && (baud >= 1200)) { + div_value = ftdi_2232h_baud_to_divisor(baud); + } else if (baud < 1200) { + div_value = ftdi_232bm_baud_to_divisor(baud); + } else { + dev_dbg(dev, "%s - Baud rate too high!\n", __func__); + div_value = ftdi_232bm_baud_to_divisor(9600); + div_okay = 0; + baud = 9600; + } + break; + } /* priv->chip_type */ + + if (div_okay) { + dev_dbg(dev, "%s - Baud rate set to %d (divisor 0x%lX) on chip %s\n", + __func__, baud, (unsigned long)div_value, + ftdi_chip_name[priv->chip_type]); + } + + tty_encode_baud_rate(tty, baud, baud); + return div_value; +} + +static int change_speed(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + __u16 urb_value; + __u16 urb_index; + __u32 urb_index_value; + int rv; + + urb_index_value = get_ftdi_divisor(tty, port); + urb_value = (__u16)urb_index_value; + urb_index = (__u16)(urb_index_value >> 16); + if ((priv->chip_type == FT2232C) || (priv->chip_type == FT2232H) || + (priv->chip_type == FT4232H) || (priv->chip_type == FT232H)) { + /* Probably the BM type needs the MSB of the encoded fractional + * divider also moved like for the chips above. Any infos? */ + urb_index = (__u16)((urb_index << 8) | priv->interface); + } + + rv = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + FTDI_SIO_SET_BAUDRATE_REQUEST, + FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE, + urb_value, urb_index, + NULL, 0, WDR_SHORT_TIMEOUT); + return rv; +} + +static int write_latency_timer(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_device *udev = port->serial->dev; + int rv; + int l = priv->latency; + + if (priv->flags & ASYNC_LOW_LATENCY) + l = 1; + + dev_dbg(&port->dev, "%s: setting latency timer = %i\n", __func__, l); + + rv = usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + FTDI_SIO_SET_LATENCY_TIMER_REQUEST, + FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, + l, priv->interface, + NULL, 0, WDR_TIMEOUT); + if (rv < 0) + dev_err(&port->dev, "Unable to write latency timer: %i\n", rv); + return rv; +} + +static int read_latency_timer(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_device *udev = port->serial->dev; + unsigned char *buf; + int rv; + + buf = kmalloc(1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + rv = usb_control_msg(udev, + usb_rcvctrlpipe(udev, 0), + FTDI_SIO_GET_LATENCY_TIMER_REQUEST, + FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, + 0, priv->interface, + buf, 1, WDR_TIMEOUT); + if (rv < 0) + dev_err(&port->dev, "Unable to read latency timer: %i\n", rv); + else + priv->latency = buf[0]; + + kfree(buf); + + return rv; +} + +static int get_serial_info(struct usb_serial_port *port, + struct serial_struct __user *retinfo) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct serial_struct tmp; + + if (!retinfo) + return -EFAULT; + memset(&tmp, 0, sizeof(tmp)); + tmp.flags = priv->flags; + tmp.baud_base = priv->baud_base; + tmp.custom_divisor = priv->custom_divisor; + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int set_serial_info(struct tty_struct *tty, + struct usb_serial_port *port, struct serial_struct __user *newinfo) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct serial_struct new_serial; + struct ftdi_private old_priv; + + if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) + return -EFAULT; + + mutex_lock(&priv->cfg_lock); + old_priv = *priv; + + /* Do error checking and permission checking */ + + if (!capable(CAP_SYS_ADMIN)) { + if (((new_serial.flags & ~ASYNC_USR_MASK) != + (priv->flags & ~ASYNC_USR_MASK))) { + mutex_unlock(&priv->cfg_lock); + return -EPERM; + } + priv->flags = ((priv->flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + priv->custom_divisor = new_serial.custom_divisor; + goto check_and_exit; + } + + if (new_serial.baud_base != priv->baud_base) { + mutex_unlock(&priv->cfg_lock); + return -EINVAL; + } + + /* Make the changes - these are privileged changes! */ + + priv->flags = ((priv->flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS)); + priv->custom_divisor = new_serial.custom_divisor; + + write_latency_timer(port); + +check_and_exit: + if ((old_priv.flags & ASYNC_SPD_MASK) != + (priv->flags & ASYNC_SPD_MASK)) { + if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + tty->alt_speed = 57600; + else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + tty->alt_speed = 115200; + else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + tty->alt_speed = 230400; + else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + tty->alt_speed = 460800; + else + tty->alt_speed = 0; + } + if (((old_priv.flags & ASYNC_SPD_MASK) != + (priv->flags & ASYNC_SPD_MASK)) || + (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) && + (old_priv.custom_divisor != priv->custom_divisor))) { + change_speed(tty, port); + mutex_unlock(&priv->cfg_lock); + } + else + mutex_unlock(&priv->cfg_lock); + return 0; +} + +static int get_lsr_info(struct usb_serial_port *port, + struct serial_struct __user *retinfo) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + unsigned int result = 0; + + if (!retinfo) + return -EFAULT; + + if (priv->transmit_empty) + result = TIOCSER_TEMT; + + if (copy_to_user(retinfo, &result, sizeof(unsigned int))) + return -EFAULT; + return 0; +} + + +/* Determine type of FTDI chip based on USB config and descriptor. */ +static void ftdi_determine_type(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + struct usb_device *udev = serial->dev; + unsigned version; + unsigned interfaces; + + /* Assume it is not the original SIO device for now. */ + priv->baud_base = 48000000 / 2; + + version = le16_to_cpu(udev->descriptor.bcdDevice); + interfaces = udev->actconfig->desc.bNumInterfaces; + dev_dbg(&port->dev, "%s: bcdDevice = 0x%x, bNumInterfaces = %u\n", __func__, + version, interfaces); + if (interfaces > 1) { + int inter; + + /* Multiple interfaces.*/ + if (version == 0x0800) { + priv->chip_type = FT4232H; + /* Hi-speed - baud clock runs at 120MHz */ + priv->baud_base = 120000000 / 2; + } else if (version == 0x0700) { + priv->chip_type = FT2232H; + /* Hi-speed - baud clock runs at 120MHz */ + priv->baud_base = 120000000 / 2; + } else + priv->chip_type = FT2232C; + + /* Determine interface code. */ + inter = serial->interface->altsetting->desc.bInterfaceNumber; + if (inter == 0) { + priv->interface = INTERFACE_A; + } else if (inter == 1) { + priv->interface = INTERFACE_B; + } else if (inter == 2) { + priv->interface = INTERFACE_C; + } else if (inter == 3) { + priv->interface = INTERFACE_D; + } + /* BM-type devices have a bug where bcdDevice gets set + * to 0x200 when iSerialNumber is 0. */ + if (version < 0x500) { + dev_dbg(&port->dev, + "%s: something fishy - bcdDevice too low for multi-interface device\n", + __func__); + } + } else if (version < 0x200) { + /* Old device. Assume it's the original SIO. */ + priv->chip_type = SIO; + priv->baud_base = 12000000 / 16; + } else if (version < 0x400) { + /* Assume it's an FT8U232AM (or FT8U245AM) */ + /* (It might be a BM because of the iSerialNumber bug, + * but it will still work as an AM device.) */ + priv->chip_type = FT8U232AM; + } else if (version < 0x600) { + /* Assume it's an FT232BM (or FT245BM) */ + priv->chip_type = FT232BM; + } else if (version < 0x900) { + /* Assume it's an FT232RL */ + priv->chip_type = FT232RL; + } else if (version < 0x1000) { + /* Assume it's an FT232H */ + priv->chip_type = FT232H; + } else { + /* Assume it's an FT-X series device */ + priv->chip_type = FTX; + } + + dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]); +} + + +/* + * Determine the maximum packet size for the device. This depends on the chip + * type and the USB host capabilities. The value should be obtained from the + * device descriptor as the chip will use the appropriate values for the host. + */ +static void ftdi_set_max_packet_size(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_interface *interface = port->serial->interface; + struct usb_endpoint_descriptor *ep_desc; + unsigned num_endpoints; + unsigned i; + + num_endpoints = interface->cur_altsetting->desc.bNumEndpoints; + if (!num_endpoints) + return; + + /* + * NOTE: Some customers have programmed FT232R/FT245R devices + * with an endpoint size of 0 - not good. In this case, we + * want to override the endpoint descriptor setting and use a + * value of 64 for wMaxPacketSize. + */ + for (i = 0; i < num_endpoints; i++) { + ep_desc = &interface->cur_altsetting->endpoint[i].desc; + if (!ep_desc->wMaxPacketSize) { + ep_desc->wMaxPacketSize = cpu_to_le16(0x40); + dev_warn(&port->dev, "Overriding wMaxPacketSize on endpoint %d\n", + usb_endpoint_num(ep_desc)); + } + } + + /* Set max packet size based on last descriptor. */ + priv->max_packet_size = usb_endpoint_maxp(ep_desc); +} + + +/* + * *************************************************************************** + * Sysfs Attribute + * *************************************************************************** + */ + +static ssize_t latency_timer_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_serial_port *port = to_usb_serial_port(dev); + struct ftdi_private *priv = usb_get_serial_port_data(port); + if (priv->flags & ASYNC_LOW_LATENCY) + return sprintf(buf, "1\n"); + else + return sprintf(buf, "%i\n", priv->latency); +} + +/* Write a new value of the latency timer, in units of milliseconds. */ +static ssize_t latency_timer_store(struct device *dev, + struct device_attribute *attr, + const char *valbuf, size_t count) +{ + struct usb_serial_port *port = to_usb_serial_port(dev); + struct ftdi_private *priv = usb_get_serial_port_data(port); + int v = simple_strtoul(valbuf, NULL, 10); + int rv; + + priv->latency = v; + rv = write_latency_timer(port); + if (rv < 0) + return -EIO; + return count; +} +static DEVICE_ATTR_RW(latency_timer); + +/* Write an event character directly to the FTDI register. The ASCII + value is in the low 8 bits, with the enable bit in the 9th bit. */ +static ssize_t store_event_char(struct device *dev, + struct device_attribute *attr, const char *valbuf, size_t count) +{ + struct usb_serial_port *port = to_usb_serial_port(dev); + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct usb_device *udev = port->serial->dev; + int v = simple_strtoul(valbuf, NULL, 10); + int rv; + + dev_dbg(&port->dev, "%s: setting event char = %i\n", __func__, v); + + rv = usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + FTDI_SIO_SET_EVENT_CHAR_REQUEST, + FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE, + v, priv->interface, + NULL, 0, WDR_TIMEOUT); + if (rv < 0) { + dev_dbg(&port->dev, "Unable to write event character: %i\n", rv); + return -EIO; + } + + return count; +} +static DEVICE_ATTR(event_char, S_IWUSR, NULL, store_event_char); + +static int create_sysfs_attrs(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + int retval = 0; + + /* XXX I've no idea if the original SIO supports the event_char + * sysfs parameter, so I'm playing it safe. */ + if (priv->chip_type != SIO) { + dev_dbg(&port->dev, "sysfs attributes for %s\n", ftdi_chip_name[priv->chip_type]); + retval = device_create_file(&port->dev, &dev_attr_event_char); + if ((!retval) && + (priv->chip_type == FT232BM || + priv->chip_type == FT2232C || + priv->chip_type == FT232RL || + priv->chip_type == FT2232H || + priv->chip_type == FT4232H || + priv->chip_type == FT232H || + priv->chip_type == FTX)) { + retval = device_create_file(&port->dev, + &dev_attr_latency_timer); + } + } + return retval; +} + +static void remove_sysfs_attrs(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + + /* XXX see create_sysfs_attrs */ + if (priv->chip_type != SIO) { + device_remove_file(&port->dev, &dev_attr_event_char); + if (priv->chip_type == FT232BM || + priv->chip_type == FT2232C || + priv->chip_type == FT232RL || + priv->chip_type == FT2232H || + priv->chip_type == FT4232H || + priv->chip_type == FT232H || + priv->chip_type == FTX) { + device_remove_file(&port->dev, &dev_attr_latency_timer); + } + } + +} + +/* + * *************************************************************************** + * FTDI driver specific functions + * *************************************************************************** + */ + +/* Probe function to check for special devices */ +static int ftdi_sio_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + struct ftdi_sio_quirk *quirk = + (struct ftdi_sio_quirk *)id->driver_info; + + if (quirk && quirk->probe) { + int ret = quirk->probe(serial); + if (ret != 0) + return ret; + } + + usb_set_serial_data(serial, (void *)id->driver_info); + + return 0; +} + +static int ftdi_sio_port_probe(struct usb_serial_port *port) +{ + struct ftdi_private *priv; + struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial); + + + priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mutex_init(&priv->cfg_lock); + + priv->flags = ASYNC_LOW_LATENCY; + + if (quirk && quirk->port_probe) + quirk->port_probe(priv); + + usb_set_serial_port_data(port, priv); + + ftdi_determine_type(port); + ftdi_set_max_packet_size(port); + if (read_latency_timer(port) < 0) + priv->latency = 16; + write_latency_timer(port); + create_sysfs_attrs(port); + return 0; +} + +/* Setup for the USB-UIRT device, which requires hardwired + * baudrate (38400 gets mapped to 312500) */ +/* Called from usbserial:serial_probe */ +static void ftdi_USB_UIRT_setup(struct ftdi_private *priv) +{ + priv->flags |= ASYNC_SPD_CUST; + priv->custom_divisor = 77; + priv->force_baud = 38400; +} + +/* Setup for the HE-TIRA1 device, which requires hardwired + * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled. */ + +static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv) +{ + priv->flags |= ASYNC_SPD_CUST; + priv->custom_divisor = 240; + priv->force_baud = 38400; + priv->force_rtscts = 1; +} + +/* + * Module parameter to control latency timer for NDI FTDI-based USB devices. + * If this value is not set in /etc/modprobe.d/ its value will be set + * to 1ms. + */ +static int ndi_latency_timer = 1; + +/* Setup for the NDI FTDI-based USB devices, which requires hardwired + * baudrate (19200 gets mapped to 1200000). + * + * Called from usbserial:serial_probe. + */ +static int ftdi_NDI_device_setup(struct usb_serial *serial) +{ + struct usb_device *udev = serial->dev; + int latency = ndi_latency_timer; + + if (latency == 0) + latency = 1; + if (latency > 99) + latency = 99; + + dev_dbg(&udev->dev, "%s setting NDI device latency to %d\n", __func__, latency); + dev_info(&udev->dev, "NDI device with a latency value of %d\n", latency); + + /* FIXME: errors are not returned */ + usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + FTDI_SIO_SET_LATENCY_TIMER_REQUEST, + FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, + latency, 0, NULL, 0, WDR_TIMEOUT); + return 0; +} + +/* + * First port on JTAG adaptors such as Olimex arm-usb-ocd or the FIC/OpenMoko + * Neo1973 Debug Board is reserved for JTAG interface and can be accessed from + * userspace using openocd. + */ +static int ftdi_jtag_probe(struct usb_serial *serial) +{ + struct usb_device *udev = serial->dev; + struct usb_interface *interface = serial->interface; + + if (interface == udev->actconfig->interface[0]) { + dev_info(&udev->dev, + "Ignoring serial port reserved for JTAG\n"); + return -ENODEV; + } + + return 0; +} + +static int ftdi_8u2232c_probe(struct usb_serial *serial) +{ + struct usb_device *udev = serial->dev; + + if (udev->manufacturer && !strcmp(udev->manufacturer, "CALAO Systems")) + return ftdi_jtag_probe(serial); + + if (udev->product && + (!strcmp(udev->product, "BeagleBone/XDS100V2") || + !strcmp(udev->product, "SNAP Connect E10"))) + return ftdi_jtag_probe(serial); + + return 0; +} + +/* + * First two ports on JTAG adaptors using an FT4232 such as STMicroelectronics's + * ST Micro Connect Lite are reserved for JTAG or other non-UART interfaces and + * can be accessed from userspace. + * The next two ports are enabled as UARTs by default, where port 2 is + * a conventional RS-232 UART. + */ +static int ftdi_stmclite_probe(struct usb_serial *serial) +{ + struct usb_device *udev = serial->dev; + struct usb_interface *interface = serial->interface; + + if (interface == udev->actconfig->interface[0] || + interface == udev->actconfig->interface[1]) { + dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n"); + return -ENODEV; + } + + return 0; +} + +static int ftdi_sio_port_remove(struct usb_serial_port *port) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + + remove_sysfs_attrs(port); + + kfree(priv); + + return 0; +} + +static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct usb_device *dev = port->serial->dev; + struct ftdi_private *priv = usb_get_serial_port_data(port); + + /* No error checking for this (will get errors later anyway) */ + /* See ftdi_sio.h for description of what is reset */ + usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE, + FTDI_SIO_RESET_SIO, + priv->interface, NULL, 0, WDR_TIMEOUT); + + /* Termios defaults are set by usb_serial_init. We don't change + port->tty->termios - this would lose speed settings, etc. + This is same behaviour as serial.c/rs_open() - Kuba */ + + /* ftdi_set_termios will send usb control messages */ + if (tty) + ftdi_set_termios(tty, port, NULL); + + return usb_serial_generic_open(tty, port); +} + +static void ftdi_dtr_rts(struct usb_serial_port *port, int on) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + + /* Disable flow control */ + if (!on) { + if (usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, + 0, priv->interface, NULL, 0, + WDR_TIMEOUT) < 0) { + dev_err(&port->dev, "error from flowcontrol urb\n"); + } + } + /* drop RTS and DTR */ + if (on) + set_mctrl(port, TIOCM_DTR | TIOCM_RTS); + else + clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); +} + +/* The SIO requires the first byte to have: + * B0 1 + * B1 0 + * B2..7 length of message excluding byte 0 + * + * The new devices do not require this byte + */ +static int ftdi_prepare_write_buffer(struct usb_serial_port *port, + void *dest, size_t size) +{ + struct ftdi_private *priv; + int count; + unsigned long flags; + + priv = usb_get_serial_port_data(port); + + if (priv->chip_type == SIO) { + unsigned char *buffer = dest; + int i, len, c; + + count = 0; + spin_lock_irqsave(&port->lock, flags); + for (i = 0; i < size - 1; i += priv->max_packet_size) { + len = min_t(int, size - i, priv->max_packet_size) - 1; + c = kfifo_out(&port->write_fifo, &buffer[i + 1], len); + if (!c) + break; + port->icount.tx += c; + buffer[i] = (c << 2) + 1; + count += c + 1; + } + spin_unlock_irqrestore(&port->lock, flags); + } else { + count = kfifo_out_locked(&port->write_fifo, dest, size, + &port->lock); + port->icount.tx += count; + } + + return count; +} + +#define FTDI_RS_ERR_MASK (FTDI_RS_BI | FTDI_RS_PE | FTDI_RS_FE | FTDI_RS_OE) + +static int ftdi_process_packet(struct usb_serial_port *port, + struct ftdi_private *priv, char *packet, int len) +{ + int i; + char status; + char flag; + char *ch; + + if (len < 2) { + dev_dbg(&port->dev, "malformed packet\n"); + return 0; + } + + /* Compare new line status to the old one, signal if different/ + N.B. packet may be processed more than once, but differences + are only processed once. */ + status = packet[0] & FTDI_STATUS_B0_MASK; + if (status != priv->prev_status) { + char diff_status = status ^ priv->prev_status; + + if (diff_status & FTDI_RS0_CTS) + port->icount.cts++; + if (diff_status & FTDI_RS0_DSR) + port->icount.dsr++; + if (diff_status & FTDI_RS0_RI) + port->icount.rng++; + if (diff_status & FTDI_RS0_RLSD) { + struct tty_struct *tty; + + port->icount.dcd++; + tty = tty_port_tty_get(&port->port); + if (tty) + usb_serial_handle_dcd_change(port, tty, + status & FTDI_RS0_RLSD); + tty_kref_put(tty); + } + + wake_up_interruptible(&port->port.delta_msr_wait); + priv->prev_status = status; + } + + flag = TTY_NORMAL; + if (packet[1] & FTDI_RS_ERR_MASK) { + /* Break takes precedence over parity, which takes precedence + * over framing errors */ + if (packet[1] & FTDI_RS_BI) { + flag = TTY_BREAK; + port->icount.brk++; + usb_serial_handle_break(port); + } else if (packet[1] & FTDI_RS_PE) { + flag = TTY_PARITY; + port->icount.parity++; + } else if (packet[1] & FTDI_RS_FE) { + flag = TTY_FRAME; + port->icount.frame++; + } + /* Overrun is special, not associated with a char */ + if (packet[1] & FTDI_RS_OE) { + port->icount.overrun++; + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); + } + } + + /* save if the transmitter is empty or not */ + if (packet[1] & FTDI_RS_TEMT) + priv->transmit_empty = 1; + else + priv->transmit_empty = 0; + + len -= 2; + if (!len) + return 0; /* status only */ + port->icount.rx += len; + ch = packet + 2; + + if (port->port.console && port->sysrq) { + for (i = 0; i < len; i++, ch++) { + if (!usb_serial_handle_sysrq_char(port, *ch)) + tty_insert_flip_char(&port->port, *ch, flag); + } + } else { + tty_insert_flip_string_fixed_flag(&port->port, ch, flag, len); + } + + return len; +} + +static void ftdi_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct ftdi_private *priv = usb_get_serial_port_data(port); + char *data = (char *)urb->transfer_buffer; + int i; + int len; + int count = 0; + + for (i = 0; i < urb->actual_length; i += priv->max_packet_size) { + len = min_t(int, urb->actual_length - i, priv->max_packet_size); + count += ftdi_process_packet(port, priv, &data[i], len); + } + + if (count) + tty_flip_buffer_push(&port->port); +} + +static void ftdi_break_ctl(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + struct ftdi_private *priv = usb_get_serial_port_data(port); + __u16 urb_value; + + /* break_state = -1 to turn on break, and 0 to turn off break */ + /* see drivers/char/tty_io.c to see it used */ + /* last_set_data_urb_value NEVER has the break bit set in it */ + + if (break_state) + urb_value = priv->last_set_data_urb_value | FTDI_SIO_SET_BREAK; + else + urb_value = priv->last_set_data_urb_value; + + if (usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + FTDI_SIO_SET_DATA_REQUEST, + FTDI_SIO_SET_DATA_REQUEST_TYPE, + urb_value , priv->interface, + NULL, 0, WDR_TIMEOUT) < 0) { + dev_err(&port->dev, "%s FAILED to enable/disable break state (state was %d)\n", + __func__, break_state); + } + + dev_dbg(&port->dev, "%s break state is %d - urb is %d\n", __func__, + break_state, urb_value); + +} + +static bool ftdi_tx_empty(struct usb_serial_port *port) +{ + unsigned char buf[2]; + int ret; + + ret = ftdi_get_modem_status(port, buf); + if (ret == 2) { + if (!(buf[1] & FTDI_RS_TEMT)) + return false; + } + + return true; +} + +/* old_termios contains the original termios settings and tty->termios contains + * the new setting to be used + * WARNING: set_termios calls this with old_termios in kernel space + */ +static void ftdi_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + struct usb_device *dev = port->serial->dev; + struct device *ddev = &port->dev; + struct ftdi_private *priv = usb_get_serial_port_data(port); + struct ktermios *termios = &tty->termios; + unsigned int cflag = termios->c_cflag; + __u16 urb_value; /* will hold the new flags */ + + /* Added for xon/xoff support */ + unsigned int iflag = termios->c_iflag; + unsigned char vstop; + unsigned char vstart; + + /* Force baud rate if this device requires it, unless it is set to + B0. */ + if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) { + dev_dbg(ddev, "%s: forcing baud rate for this device\n", __func__); + tty_encode_baud_rate(tty, priv->force_baud, + priv->force_baud); + } + + /* Force RTS-CTS if this device requires it. */ + if (priv->force_rtscts) { + dev_dbg(ddev, "%s: forcing rtscts for this device\n", __func__); + termios->c_cflag |= CRTSCTS; + } + + /* + * All FTDI UART chips are limited to CS7/8. We shouldn't pretend to + * support CS5/6 and revert the CSIZE setting instead. + * + * CS5 however is used to control some smartcard readers which abuse + * this limitation to switch modes. Original FTDI chips fall back to + * eight data bits. + * + * TODO: Implement a quirk to only allow this with mentioned + * readers. One I know of (Argolis Smartreader V1) + * returns "USB smartcard server" as iInterface string. + * The vendor didn't bother with a custom VID/PID of + * course. + */ + if (C_CSIZE(tty) == CS6) { + dev_warn(ddev, "requested CSIZE setting not supported\n"); + + termios->c_cflag &= ~CSIZE; + if (old_termios) + termios->c_cflag |= old_termios->c_cflag & CSIZE; + else + termios->c_cflag |= CS8; + } + + cflag = termios->c_cflag; + + if (!old_termios) + goto no_skip; + + if (old_termios->c_cflag == termios->c_cflag + && old_termios->c_ispeed == termios->c_ispeed + && old_termios->c_ospeed == termios->c_ospeed) + goto no_c_cflag_changes; + + /* NOTE These routines can get interrupted by + ftdi_sio_read_bulk_callback - need to examine what this means - + don't see any problems yet */ + + if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) == + (termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB))) + goto no_data_parity_stop_changes; + +no_skip: + /* Set number of data bits, parity, stop bits */ + + urb_value = 0; + urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 : + FTDI_SIO_SET_DATA_STOP_BITS_1); + if (cflag & PARENB) { + if (cflag & CMSPAR) + urb_value |= cflag & PARODD ? + FTDI_SIO_SET_DATA_PARITY_MARK : + FTDI_SIO_SET_DATA_PARITY_SPACE; + else + urb_value |= cflag & PARODD ? + FTDI_SIO_SET_DATA_PARITY_ODD : + FTDI_SIO_SET_DATA_PARITY_EVEN; + } else { + urb_value |= FTDI_SIO_SET_DATA_PARITY_NONE; + } + switch (cflag & CSIZE) { + case CS5: + dev_dbg(ddev, "Setting CS5 quirk\n"); + break; + case CS7: + urb_value |= 7; + dev_dbg(ddev, "Setting CS7\n"); + break; + default: + case CS8: + urb_value |= 8; + dev_dbg(ddev, "Setting CS8\n"); + break; + } + + /* This is needed by the break command since it uses the same command + - but is or'ed with this value */ + priv->last_set_data_urb_value = urb_value; + + if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + FTDI_SIO_SET_DATA_REQUEST, + FTDI_SIO_SET_DATA_REQUEST_TYPE, + urb_value , priv->interface, + NULL, 0, WDR_SHORT_TIMEOUT) < 0) { + dev_err(ddev, "%s FAILED to set databits/stopbits/parity\n", + __func__); + } + + /* Now do the baudrate */ +no_data_parity_stop_changes: + if ((cflag & CBAUD) == B0) { + /* Disable flow control */ + if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, + 0, priv->interface, + NULL, 0, WDR_TIMEOUT) < 0) { + dev_err(ddev, "%s error from disable flowcontrol urb\n", + __func__); + } + /* Drop RTS and DTR */ + clear_mctrl(port, TIOCM_DTR | TIOCM_RTS); + } else { + /* set the baudrate determined before */ + mutex_lock(&priv->cfg_lock); + if (change_speed(tty, port)) + dev_err(ddev, "%s urb failed to set baudrate\n", __func__); + mutex_unlock(&priv->cfg_lock); + /* Ensure RTS and DTR are raised when baudrate changed from 0 */ + if (old_termios && (old_termios->c_cflag & CBAUD) == B0) + set_mctrl(port, TIOCM_DTR | TIOCM_RTS); + } + + /* Set flow control */ + /* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */ +no_c_cflag_changes: + if (cflag & CRTSCTS) { + dev_dbg(ddev, "%s Setting to CRTSCTS flow control\n", __func__); + if (usb_control_msg(dev, + usb_sndctrlpipe(dev, 0), + FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, + 0 , (FTDI_SIO_RTS_CTS_HS | priv->interface), + NULL, 0, WDR_TIMEOUT) < 0) { + dev_err(ddev, "urb failed to set to rts/cts flow control\n"); + } + } else { + /* + * Xon/Xoff code + * + * Check the IXOFF status in the iflag component of the + * termios structure. If IXOFF is not set, the pre-xon/xoff + * code is executed. + */ + if (iflag & IXOFF) { + dev_dbg(ddev, "%s request to enable xonxoff iflag=%04x\n", + __func__, iflag); + /* Try to enable the XON/XOFF on the ftdi_sio + * Set the vstart and vstop -- could have been done up + * above where a lot of other dereferencing is done but + * that would be very inefficient as vstart and vstop + * are not always needed. + */ + vstart = termios->c_cc[VSTART]; + vstop = termios->c_cc[VSTOP]; + urb_value = (vstop << 8) | (vstart); + + if (usb_control_msg(dev, + usb_sndctrlpipe(dev, 0), + FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, + urb_value , (FTDI_SIO_XON_XOFF_HS + | priv->interface), + NULL, 0, WDR_TIMEOUT) < 0) { + dev_err(&port->dev, "urb failed to set to " + "xon/xoff flow control\n"); + } + } else { + /* else clause to only run if cflag ! CRTSCTS and iflag + * ! XOFF. CHECKME Assuming XON/XOFF handled by tty + * stack - not by device */ + dev_dbg(ddev, "%s Turning off hardware flow control\n", __func__); + if (usb_control_msg(dev, + usb_sndctrlpipe(dev, 0), + FTDI_SIO_SET_FLOW_CTRL_REQUEST, + FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, + 0, priv->interface, + NULL, 0, WDR_TIMEOUT) < 0) { + dev_err(ddev, "urb failed to clear flow control\n"); + } + } + } +} + +/* + * Get modem-control status. + * + * Returns the number of status bytes retrieved (device dependant), or + * negative error code. + */ +static int ftdi_get_modem_status(struct usb_serial_port *port, + unsigned char status[2]) +{ + struct ftdi_private *priv = usb_get_serial_port_data(port); + unsigned char *buf; + int len; + int ret; + + buf = kmalloc(2, GFP_KERNEL); + if (!buf) + return -ENOMEM; + /* + * The 8U232AM returns a two byte value (the SIO a 1 byte value) in + * the same format as the data returned from the in point. + */ + switch (priv->chip_type) { + case SIO: + len = 1; + break; + case FT8U232AM: + case FT232BM: + case FT2232C: + case FT232RL: + case FT2232H: + case FT4232H: + case FT232H: + case FTX: + len = 2; + break; + default: + ret = -EFAULT; + goto out; + } + + ret = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + FTDI_SIO_GET_MODEM_STATUS_REQUEST, + FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, + 0, priv->interface, + buf, len, WDR_TIMEOUT); + if (ret < 0) { + dev_err(&port->dev, "failed to get modem status: %d\n", ret); + ret = usb_translate_errors(ret); + goto out; + } + + status[0] = buf[0]; + if (ret > 1) + status[1] = buf[1]; + else + status[1] = 0; + + dev_dbg(&port->dev, "%s - 0x%02x%02x\n", __func__, status[0], + status[1]); +out: + kfree(buf); + + return ret; +} + +static int ftdi_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct ftdi_private *priv = usb_get_serial_port_data(port); + unsigned char buf[2]; + int ret; + + ret = ftdi_get_modem_status(port, buf); + if (ret < 0) + return ret; + + ret = (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) | + (buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) | + (buf[0] & FTDI_SIO_RI_MASK ? TIOCM_RI : 0) | + (buf[0] & FTDI_SIO_RLSD_MASK ? TIOCM_CD : 0) | + priv->last_dtr_rts; + + return ret; +} + +static int ftdi_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + + return update_mctrl(port, set, clear); +} + +static int ftdi_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + + /* Based on code from acm.c and others */ + switch (cmd) { + + case TIOCGSERIAL: /* gets serial port data */ + return get_serial_info(port, + (struct serial_struct __user *) arg); + + case TIOCSSERIAL: /* sets serial port data */ + return set_serial_info(tty, port, + (struct serial_struct __user *) arg); + case TIOCSERGETLSR: + return get_lsr_info(port, (struct serial_struct __user *)arg); + break; + default: + break; + } + + return -ENOIOCTLCMD; +} + +module_usb_serial_driver(serial_drivers, id_table_combined); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +module_param(ndi_latency_timer, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(ndi_latency_timer, "NDI device latency timer override"); diff --git a/kernel/drivers/usb/serial/ftdi_sio.h b/kernel/drivers/usb/serial/ftdi_sio.h new file mode 100644 index 000000000..ed58c6fa8 --- /dev/null +++ b/kernel/drivers/usb/serial/ftdi_sio.h @@ -0,0 +1,564 @@ +/* + * Driver definitions for the FTDI USB Single Port Serial Converter - + * known as FTDI_SIO (Serial Input/Output application of the chipset) + * + * For USB vendor/product IDs (VID/PID), please see ftdi_sio_ids.h + * + * + * The example I have is known as the USC-1000 which is available from + * http://www.dse.co.nz - cat no XH4214 It looks similar to this: + * http://www.dansdata.com/usbser.htm but I can't be sure There are other + * USC-1000s which don't look like my device though so beware! + * + * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side, + * USB on the other. + * + * Thanx to FTDI (http://www.ftdichip.com) for so kindly providing details + * of the protocol required to talk to the device and ongoing assistence + * during development. + * + * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the + * FTDI_SIO implementation. + * + */ + +/* Commands */ +#define FTDI_SIO_RESET 0 /* Reset the port */ +#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ +#define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */ +#define FTDI_SIO_SET_BAUD_RATE 3 /* Set baud rate */ +#define FTDI_SIO_SET_DATA 4 /* Set the data characteristics of + the port */ +#define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modem + status register */ +#define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */ +#define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */ +#define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */ +#define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */ + +/* Interface indices for FT2232, FT2232H and FT4232H devices */ +#define INTERFACE_A 1 +#define INTERFACE_B 2 +#define INTERFACE_C 3 +#define INTERFACE_D 4 + + +/* + * BmRequestType: 1100 0000b + * bRequest: FTDI_E2_READ + * wValue: 0 + * wIndex: Address of word to read + * wLength: 2 + * Data: Will return a word of data from E2Address + * + */ + +/* Port Identifier Table */ +#define PIT_DEFAULT 0 /* SIOA */ +#define PIT_SIOA 1 /* SIOA */ +/* The device this driver is tested with one has only one port */ +#define PIT_SIOB 2 /* SIOB */ +#define PIT_PARALLEL 3 /* Parallel */ + +/* FTDI_SIO_RESET */ +#define FTDI_SIO_RESET_REQUEST FTDI_SIO_RESET +#define FTDI_SIO_RESET_REQUEST_TYPE 0x40 +#define FTDI_SIO_RESET_SIO 0 +#define FTDI_SIO_RESET_PURGE_RX 1 +#define FTDI_SIO_RESET_PURGE_TX 2 + +/* + * BmRequestType: 0100 0000B + * bRequest: FTDI_SIO_RESET + * wValue: Control Value + * 0 = Reset SIO + * 1 = Purge RX buffer + * 2 = Purge TX buffer + * wIndex: Port + * wLength: 0 + * Data: None + * + * The Reset SIO command has this effect: + * + * Sets flow control set to 'none' + * Event char = $0D + * Event trigger = disabled + * Purge RX buffer + * Purge TX buffer + * Clear DTR + * Clear RTS + * baud and data format not reset + * + * The Purge RX and TX buffer commands affect nothing except the buffers + * + */ + +/* FTDI_SIO_SET_BAUDRATE */ +#define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40 +#define FTDI_SIO_SET_BAUDRATE_REQUEST 3 + +/* + * BmRequestType: 0100 0000B + * bRequest: FTDI_SIO_SET_BAUDRATE + * wValue: BaudDivisor value - see below + * wIndex: Port + * wLength: 0 + * Data: None + * The BaudDivisor values are calculated as follows: + * - BaseClock is either 12000000 or 48000000 depending on the device. + * FIXME: I wish I knew how to detect old chips to select proper base clock! + * - BaudDivisor is a fixed point number encoded in a funny way. + * (--WRONG WAY OF THINKING--) + * BaudDivisor is a fixed point number encoded with following bit weighs: + * (-2)(-1)(13..0). It is a radical with a denominator of 4, so values + * end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...). + * (--THE REALITY--) + * The both-bits-set has quite different meaning from 0.75 - the chip + * designers have decided it to mean 0.125 instead of 0.75. + * This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates + * and Flow Control Consideration for USB to RS232". + * - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should + * automagically re-encode the resulting value to take fractions into + * consideration. + * As all values are integers, some bit twiddling is in order: + * BaudDivisor = (BaseClock / 16 / BaudRate) | + * (((BaseClock / 2 / BaudRate) & 4) ? 0x4000 // 0.5 + * : ((BaseClock / 2 / BaudRate) & 2) ? 0x8000 // 0.25 + * : ((BaseClock / 2 / BaudRate) & 1) ? 0xc000 // 0.125 + * : 0) + * + * For the FT232BM, a 17th divisor bit was introduced to encode the multiples + * of 0.125 missing from the FT8U232AM. Bits 16 to 14 are coded as follows + * (the first four codes are the same as for the FT8U232AM, where bit 16 is + * always 0): + * 000 - add .000 to divisor + * 001 - add .500 to divisor + * 010 - add .250 to divisor + * 011 - add .125 to divisor + * 100 - add .375 to divisor + * 101 - add .625 to divisor + * 110 - add .750 to divisor + * 111 - add .875 to divisor + * Bits 15 to 0 of the 17-bit divisor are placed in the urb value. Bit 16 is + * placed in bit 0 of the urb index. + * + * Note that there are a couple of special cases to support the highest baud + * rates. If the calculated divisor value is 1, this needs to be replaced with + * 0. Additionally for the FT232BM, if the calculated divisor value is 0x4001 + * (1.5), this needs to be replaced with 0x0001 (1) (but this divisor value is + * not supported by the FT8U232AM). + */ + +enum ftdi_chip_type { + SIO = 1, + FT8U232AM = 2, + FT232BM = 3, + FT2232C = 4, + FT232RL = 5, + FT2232H = 6, + FT4232H = 7, + FT232H = 8, + FTX = 9, +}; + +enum ftdi_sio_baudrate { + ftdi_sio_b300 = 0, + ftdi_sio_b600 = 1, + ftdi_sio_b1200 = 2, + ftdi_sio_b2400 = 3, + ftdi_sio_b4800 = 4, + ftdi_sio_b9600 = 5, + ftdi_sio_b19200 = 6, + ftdi_sio_b38400 = 7, + ftdi_sio_b57600 = 8, + ftdi_sio_b115200 = 9 +}; + +/* + * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor + * values are calculated internally. + */ +#define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA +#define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40 +#define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8) +#define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8) +#define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8) +#define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8) +#define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8) +#define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11) +#define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11) +#define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11) +#define FTDI_SIO_SET_BREAK (0x1 << 14) +/* FTDI_SIO_SET_DATA */ + +/* + * BmRequestType: 0100 0000B + * bRequest: FTDI_SIO_SET_DATA + * wValue: Data characteristics (see below) + * wIndex: Port + * wLength: 0 + * Data: No + * + * Data characteristics + * + * B0..7 Number of data bits + * B8..10 Parity + * 0 = None + * 1 = Odd + * 2 = Even + * 3 = Mark + * 4 = Space + * B11..13 Stop Bits + * 0 = 1 + * 1 = 1.5 + * 2 = 2 + * B14 + * 1 = TX ON (break) + * 0 = TX OFF (normal state) + * B15 Reserved + * + */ + + + +/* FTDI_SIO_MODEM_CTRL */ +#define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40 +#define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL + +/* + * BmRequestType: 0100 0000B + * bRequest: FTDI_SIO_MODEM_CTRL + * wValue: ControlValue (see below) + * wIndex: Port + * wLength: 0 + * Data: None + * + * NOTE: If the device is in RTS/CTS flow control, the RTS set by this + * command will be IGNORED without an error being returned + * Also - you can not set DTR and RTS with one control message + */ + +#define FTDI_SIO_SET_DTR_MASK 0x1 +#define FTDI_SIO_SET_DTR_HIGH (1 | (FTDI_SIO_SET_DTR_MASK << 8)) +#define FTDI_SIO_SET_DTR_LOW (0 | (FTDI_SIO_SET_DTR_MASK << 8)) +#define FTDI_SIO_SET_RTS_MASK 0x2 +#define FTDI_SIO_SET_RTS_HIGH (2 | (FTDI_SIO_SET_RTS_MASK << 8)) +#define FTDI_SIO_SET_RTS_LOW (0 | (FTDI_SIO_SET_RTS_MASK << 8)) + +/* + * ControlValue + * B0 DTR state + * 0 = reset + * 1 = set + * B1 RTS state + * 0 = reset + * 1 = set + * B2..7 Reserved + * B8 DTR state enable + * 0 = ignore + * 1 = use DTR state + * B9 RTS state enable + * 0 = ignore + * 1 = use RTS state + * B10..15 Reserved + */ + +/* FTDI_SIO_SET_FLOW_CTRL */ +#define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40 +#define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL +#define FTDI_SIO_DISABLE_FLOW_CTRL 0x0 +#define FTDI_SIO_RTS_CTS_HS (0x1 << 8) +#define FTDI_SIO_DTR_DSR_HS (0x2 << 8) +#define FTDI_SIO_XON_XOFF_HS (0x4 << 8) +/* + * BmRequestType: 0100 0000b + * bRequest: FTDI_SIO_SET_FLOW_CTRL + * wValue: Xoff/Xon + * wIndex: Protocol/Port - hIndex is protocol / lIndex is port + * wLength: 0 + * Data: None + * + * hIndex protocol is: + * B0 Output handshaking using RTS/CTS + * 0 = disabled + * 1 = enabled + * B1 Output handshaking using DTR/DSR + * 0 = disabled + * 1 = enabled + * B2 Xon/Xoff handshaking + * 0 = disabled + * 1 = enabled + * + * A value of zero in the hIndex field disables handshaking + * + * If Xon/Xoff handshaking is specified, the hValue field should contain the + * XOFF character and the lValue field contains the XON character. + */ + +/* + * FTDI_SIO_GET_LATENCY_TIMER + * + * Set the timeout interval. The FTDI collects data from the slave + * device, transmitting it to the host when either A) 62 bytes are + * received, or B) the timeout interval has elapsed and the buffer + * contains at least 1 byte. Setting this value to a small number + * can dramatically improve performance for applications which send + * small packets, since the default value is 16ms. + */ +#define FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER +#define FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0 + +/* + * BmRequestType: 1100 0000b + * bRequest: FTDI_SIO_GET_LATENCY_TIMER + * wValue: 0 + * wIndex: Port + * wLength: 0 + * Data: latency (on return) + */ + +/* + * FTDI_SIO_SET_LATENCY_TIMER + * + * Set the timeout interval. The FTDI collects data from the slave + * device, transmitting it to the host when either A) 62 bytes are + * received, or B) the timeout interval has elapsed and the buffer + * contains at least 1 byte. Setting this value to a small number + * can dramatically improve performance for applications which send + * small packets, since the default value is 16ms. + */ +#define FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER +#define FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40 + +/* + * BmRequestType: 0100 0000b + * bRequest: FTDI_SIO_SET_LATENCY_TIMER + * wValue: Latency (milliseconds) + * wIndex: Port + * wLength: 0 + * Data: None + * + * wValue: + * B0..7 Latency timer + * B8..15 0 + * + */ + +/* + * FTDI_SIO_SET_EVENT_CHAR + * + * Set the special event character for the specified communications port. + * If the device sees this character it will immediately return the + * data read so far - rather than wait 40ms or until 62 bytes are read + * which is what normally happens. + */ + + +#define FTDI_SIO_SET_EVENT_CHAR_REQUEST FTDI_SIO_SET_EVENT_CHAR +#define FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40 + + +/* + * BmRequestType: 0100 0000b + * bRequest: FTDI_SIO_SET_EVENT_CHAR + * wValue: EventChar + * wIndex: Port + * wLength: 0 + * Data: None + * + * wValue: + * B0..7 Event Character + * B8 Event Character Processing + * 0 = disabled + * 1 = enabled + * B9..15 Reserved + * + */ + +/* FTDI_SIO_SET_ERROR_CHAR */ + +/* + * Set the parity error replacement character for the specified communications + * port + */ + +/* + * BmRequestType: 0100 0000b + * bRequest: FTDI_SIO_SET_EVENT_CHAR + * wValue: Error Char + * wIndex: Port + * wLength: 0 + * Data: None + * + *Error Char + * B0..7 Error Character + * B8 Error Character Processing + * 0 = disabled + * 1 = enabled + * B9..15 Reserved + * + */ + +/* FTDI_SIO_GET_MODEM_STATUS */ +/* Retrieve the current value of the modem status register */ + +#define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0 +#define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS +#define FTDI_SIO_CTS_MASK 0x10 +#define FTDI_SIO_DSR_MASK 0x20 +#define FTDI_SIO_RI_MASK 0x40 +#define FTDI_SIO_RLSD_MASK 0x80 +/* + * BmRequestType: 1100 0000b + * bRequest: FTDI_SIO_GET_MODEM_STATUS + * wValue: zero + * wIndex: Port + * wLength: 1 + * Data: Status + * + * One byte of data is returned + * B0..3 0 + * B4 CTS + * 0 = inactive + * 1 = active + * B5 DSR + * 0 = inactive + * 1 = active + * B6 Ring Indicator (RI) + * 0 = inactive + * 1 = active + * B7 Receive Line Signal Detect (RLSD) + * 0 = inactive + * 1 = active + */ + + + +/* Descriptors returned by the device + * + * Device Descriptor + * + * Offset Field Size Value Description + * 0 bLength 1 0x12 Size of descriptor in bytes + * 1 bDescriptorType 1 0x01 DEVICE Descriptor Type + * 2 bcdUSB 2 0x0110 USB Spec Release Number + * 4 bDeviceClass 1 0x00 Class Code + * 5 bDeviceSubClass 1 0x00 SubClass Code + * 6 bDeviceProtocol 1 0x00 Protocol Code + * 7 bMaxPacketSize0 1 0x08 Maximum packet size for endpoint 0 + * 8 idVendor 2 0x0403 Vendor ID + * 10 idProduct 2 0x8372 Product ID (FTDI_SIO_PID) + * 12 bcdDevice 2 0x0001 Device release number + * 14 iManufacturer 1 0x01 Index of man. string desc + * 15 iProduct 1 0x02 Index of prod string desc + * 16 iSerialNumber 1 0x02 Index of serial nmr string desc + * 17 bNumConfigurations 1 0x01 Number of possible configurations + * + * Configuration Descriptor + * + * Offset Field Size Value + * 0 bLength 1 0x09 Size of descriptor in bytes + * 1 bDescriptorType 1 0x02 CONFIGURATION Descriptor Type + * 2 wTotalLength 2 0x0020 Total length of data + * 4 bNumInterfaces 1 0x01 Number of interfaces supported + * 5 bConfigurationValue 1 0x01 Argument for SetCOnfiguration() req + * 6 iConfiguration 1 0x02 Index of config string descriptor + * 7 bmAttributes 1 0x20 Config characteristics Remote Wakeup + * 8 MaxPower 1 0x1E Max power consumption + * + * Interface Descriptor + * + * Offset Field Size Value + * 0 bLength 1 0x09 Size of descriptor in bytes + * 1 bDescriptorType 1 0x04 INTERFACE Descriptor Type + * 2 bInterfaceNumber 1 0x00 Number of interface + * 3 bAlternateSetting 1 0x00 Value used to select alternate + * 4 bNumEndpoints 1 0x02 Number of endpoints + * 5 bInterfaceClass 1 0xFF Class Code + * 6 bInterfaceSubClass 1 0xFF Subclass Code + * 7 bInterfaceProtocol 1 0xFF Protocol Code + * 8 iInterface 1 0x02 Index of interface string description + * + * IN Endpoint Descriptor + * + * Offset Field Size Value + * 0 bLength 1 0x07 Size of descriptor in bytes + * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type + * 2 bEndpointAddress 1 0x82 Address of endpoint + * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk + * 4 bNumEndpoints 2 0x0040 maximum packet size + * 5 bInterval 1 0x00 Interval for polling endpoint + * + * OUT Endpoint Descriptor + * + * Offset Field Size Value + * 0 bLength 1 0x07 Size of descriptor in bytes + * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type + * 2 bEndpointAddress 1 0x02 Address of endpoint + * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk + * 4 bNumEndpoints 2 0x0040 maximum packet size + * 5 bInterval 1 0x00 Interval for polling endpoint + * + * DATA FORMAT + * + * IN Endpoint + * + * The device reserves the first two bytes of data on this endpoint to contain + * the current values of the modem and line status registers. In the absence of + * data, the device generates a message consisting of these two status bytes + * every 40 ms + * + * Byte 0: Modem Status + * + * Offset Description + * B0 Reserved - must be 1 + * B1 Reserved - must be 0 + * B2 Reserved - must be 0 + * B3 Reserved - must be 0 + * B4 Clear to Send (CTS) + * B5 Data Set Ready (DSR) + * B6 Ring Indicator (RI) + * B7 Receive Line Signal Detect (RLSD) + * + * Byte 1: Line Status + * + * Offset Description + * B0 Data Ready (DR) + * B1 Overrun Error (OE) + * B2 Parity Error (PE) + * B3 Framing Error (FE) + * B4 Break Interrupt (BI) + * B5 Transmitter Holding Register (THRE) + * B6 Transmitter Empty (TEMT) + * B7 Error in RCVR FIFO + * + */ +#define FTDI_RS0_CTS (1 << 4) +#define FTDI_RS0_DSR (1 << 5) +#define FTDI_RS0_RI (1 << 6) +#define FTDI_RS0_RLSD (1 << 7) + +#define FTDI_RS_DR 1 +#define FTDI_RS_OE (1<<1) +#define FTDI_RS_PE (1<<2) +#define FTDI_RS_FE (1<<3) +#define FTDI_RS_BI (1<<4) +#define FTDI_RS_THRE (1<<5) +#define FTDI_RS_TEMT (1<<6) +#define FTDI_RS_FIFO (1<<7) + +/* + * OUT Endpoint + * + * This device reserves the first bytes of data on this endpoint contain the + * length and port identifier of the message. For the FTDI USB Serial converter + * the port identifier is always 1. + * + * Byte 0: Line Status + * + * Offset Description + * B0 Reserved - must be 1 + * B1 Reserved - must be 0 + * B2..7 Length of message - (not including Byte 0) + * + */ diff --git a/kernel/drivers/usb/serial/ftdi_sio_ids.h b/kernel/drivers/usb/serial/ftdi_sio_ids.h new file mode 100644 index 000000000..792e05412 --- /dev/null +++ b/kernel/drivers/usb/serial/ftdi_sio_ids.h @@ -0,0 +1,1470 @@ +/* + * vendor/product IDs (VID/PID) of devices using FTDI USB serial converters. + * Please keep numerically sorted within individual areas, thanks! + * + * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais + * from Rudolf Gugler + * + */ + + +/**********************************/ +/***** devices using FTDI VID *****/ +/**********************************/ + + +#define FTDI_VID 0x0403 /* Vendor Id */ + + +/*** "original" FTDI device PIDs ***/ + +#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ +#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ +#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ +#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ +#define FTDI_232H_PID 0x6014 /* Single channel hi-speed device */ +#define FTDI_FTX_PID 0x6015 /* FT-X series (FT201X, FT230X, FT231X, etc) */ +#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ +#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ + + +/*** third-party PIDs (using FTDI_VID) ***/ + +/* + * Certain versions of the official Windows FTDI driver reprogrammed + * counterfeit FTDI devices to PID 0. Support these devices anyway. + */ +#define FTDI_BRICK_PID 0x0000 + +#define FTDI_LUMEL_PD12_PID 0x6002 + +/* Cyber Cortex AV by Fabulous Silicon (http://fabuloussilicon.com) */ +#define CYBER_CORTEX_AV_PID 0x8698 + +/* + * Marvell OpenRD Base, Client + * http://www.open-rd.org + * OpenRD Base, Client use VID 0x0403 + */ +#define MARVELL_OPENRD_PID 0x9e90 + +/* www.candapter.com Ewert Energy Systems CANdapter device */ +#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ + +#define FTDI_BM_ATOM_NANO_PID 0xa559 /* Basic Micro ATOM Nano USB2Serial */ + +/* + * Texas Instruments XDS100v2 JTAG / BeagleBone A3 + * http://processors.wiki.ti.com/index.php/XDS100 + * http://beagleboard.org/bone + */ +#define TI_XDS100V2_PID 0xa6d0 + +#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */ +#define FTDI_EV3CON_PID 0xABB9 /* Mindstorms EV3 Console Adapter */ + +/* US Interface Navigator (http://www.usinterface.com/) */ +#define FTDI_USINT_CAT_PID 0xb810 /* Navigator CAT and 2nd PTT lines */ +#define FTDI_USINT_WKEY_PID 0xb811 /* Navigator WKEY and FSK lines */ +#define FTDI_USINT_RS232_PID 0xb812 /* Navigator RS232 and CONFIG lines */ + +/* OOCDlink by Joern Kaipf <joernk@web.de> + * (http://www.joernonline.de/) */ +#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ + +/* Luminary Micro Stellaris Boards, VID = FTDI_VID */ +/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ +#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 +#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 +#define LMI_LM3S_ICDI_BOARD_PID 0xbcda + +#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */ + +/* OpenDCC (www.opendcc.de) product id */ +#define FTDI_OPENDCC_PID 0xBFD8 +#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9 +#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA +#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB +#define FTDI_OPENDCC_GBM_PID 0xBFDC +#define FTDI_OPENDCC_GBM_BOOST_PID 0xBFDD + +/* NZR SEM 16+ USB (http://www.nzr.de) */ +#define FTDI_NZR_SEM_USB_PID 0xC1E0 /* NZR SEM-LOG16+ */ + +/* + * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) + */ +#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ + +/* DMX4ALL DMX Interfaces */ +#define FTDI_DMX4ALL 0xC850 + +/* + * ASK.fr devices + */ +#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ + +/* www.starting-point-systems.com µChameleon device */ +#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ + +/* + * Tactrix OpenPort (ECU) devices. + * OpenPort 1.3M submitted by Donour Sizemore. + * OpenPort 1.3S and 1.3U submitted by Ian Abbott. + */ +#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ +#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ +#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ + +#define FTDI_DISTORTEC_JTAG_LOCK_PICK_PID 0xCFF8 + +/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ +/* the VID is the standard ftdi vid (FTDI_VID) */ +#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ +#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */ +#define FTDI_SCS_DEVICE_2_PID 0xD012 +#define FTDI_SCS_DEVICE_3_PID 0xD013 +#define FTDI_SCS_DEVICE_4_PID 0xD014 +#define FTDI_SCS_DEVICE_5_PID 0xD015 +#define FTDI_SCS_DEVICE_6_PID 0xD016 +#define FTDI_SCS_DEVICE_7_PID 0xD017 + +/* iPlus device */ +#define FTDI_IPLUS_PID 0xD070 /* Product Id */ +#define FTDI_IPLUS2_PID 0xD071 /* Product Id */ + +/* + * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. + */ +#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ + +/* Propox devices */ +#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 +#define FTDI_PROPOX_ISPCABLEIII_PID 0xD739 + +/* Lenz LI-USB Computer Interface. */ +#define FTDI_LENZ_LIUSB_PID 0xD780 + +/* Vardaan Enterprises Serial Interface VEUSB422R3 */ +#define FTDI_VARDAAN_PID 0xF070 + +/* + * Xsens Technologies BV products (http://www.xsens.com). + */ +#define XSENS_VID 0x2639 +#define XSENS_AWINDA_STATION_PID 0x0101 +#define XSENS_AWINDA_DONGLE_PID 0x0102 +#define XSENS_MTW_PID 0x0200 /* Xsens MTw */ +#define XSENS_MTDEVBOARD_PID 0x0300 /* Motion Tracker Development Board */ +#define XSENS_CONVERTER_PID 0xD00D /* Xsens USB-serial converter */ + +/* Xsens devices using FTDI VID */ +#define XSENS_CONVERTER_0_PID 0xD388 /* Xsens USB converter */ +#define XSENS_CONVERTER_1_PID 0xD389 /* Xsens Wireless Receiver */ +#define XSENS_CONVERTER_2_PID 0xD38A +#define XSENS_CONVERTER_3_PID 0xD38B /* Xsens USB-serial converter */ +#define XSENS_CONVERTER_4_PID 0xD38C /* Xsens Wireless Receiver */ +#define XSENS_CONVERTER_5_PID 0xD38D /* Xsens Awinda Station */ +#define XSENS_CONVERTER_6_PID 0xD38E +#define XSENS_CONVERTER_7_PID 0xD38F + +/** + * Zolix (www.zolix.com.cb) product ids + */ +#define FTDI_OMNI1509 0xD491 /* Omni1509 embedded USB-serial */ + +/* + * NDI (www.ndigital.com) product ids + */ +#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */ +#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */ +#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */ +#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */ +#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */ + +/* + * ChamSys Limited (www.chamsys.co.uk) USB wing/interface product IDs + */ +#define FTDI_CHAMSYS_24_MASTER_WING_PID 0xDAF8 +#define FTDI_CHAMSYS_PC_WING_PID 0xDAF9 +#define FTDI_CHAMSYS_USB_DMX_PID 0xDAFA +#define FTDI_CHAMSYS_MIDI_TIMECODE_PID 0xDAFB +#define FTDI_CHAMSYS_MINI_WING_PID 0xDAFC +#define FTDI_CHAMSYS_MAXI_WING_PID 0xDAFD +#define FTDI_CHAMSYS_MEDIA_WING_PID 0xDAFE +#define FTDI_CHAMSYS_WING_PID 0xDAFF + +/* + * Westrex International devices submitted by Cory Lee + */ +#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ +#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ + +/* + * ACG Identification Technologies GmbH products (http://www.acg.de/). + * Submitted by anton -at- goto10 -dot- org. + */ +#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ + +/* + * Definitions for Artemis astronomical USB based cameras + * Check it at http://www.artemisccd.co.uk/ + */ +#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ + +/* + * Definitions for ATIK Instruments astronomical USB based cameras + * Check it at http://www.atik-instruments.com/ + */ +#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ +#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ +#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ +#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ +#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */ + +/* + * Yost Engineering, Inc. products (www.yostengineering.com). + * PID 0xE050 submitted by Aaron Prose. + */ +#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ + +/* + * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). + * Almost all of these devices use FTDI's vendor ID (0x0403). + * Further IDs taken from ELV Windows .inf file. + * + * The previously included PID for the UO 100 module was incorrect. + * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). + * + * Armin Laeuger originally sent the PID for the UM 100 module. + */ +#define FTDI_ELV_VID 0x1B1F /* ELV AG */ +#define FTDI_ELV_WS300_PID 0xC006 /* eQ3 WS 300 PC II */ +#define FTDI_ELV_USR_PID 0xE000 /* ELV Universal-Sound-Recorder */ +#define FTDI_ELV_MSM1_PID 0xE001 /* ELV Mini-Sound-Modul */ +#define FTDI_ELV_KL100_PID 0xE002 /* ELV Kfz-Leistungsmesser KL 100 */ +#define FTDI_ELV_WS550_PID 0xE004 /* WS 550 */ +#define FTDI_ELV_EC3000_PID 0xE006 /* ENERGY CONTROL 3000 USB */ +#define FTDI_ELV_WS888_PID 0xE008 /* WS 888 */ +#define FTDI_ELV_TWS550_PID 0xE009 /* Technoline WS 550 */ +#define FTDI_ELV_FEM_PID 0xE00A /* Funk Energie Monitor */ +#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ +#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ +#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ +#define FTDI_ELV_UMS100_PID 0xE0EB /* ELV USB Master-Slave Schaltsteckdose UMS 100 */ +#define FTDI_ELV_TFD128_PID 0xE0EC /* ELV Temperatur-Feuchte-Datenlogger TFD 128 */ +#define FTDI_ELV_FM3RX_PID 0xE0ED /* ELV Messwertuebertragung FM3 RX */ +#define FTDI_ELV_WS777_PID 0xE0EE /* Conrad WS 777 */ +#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Energy monitor EM 1010 PC */ +#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ +#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ +#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ +#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ +#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ +#define FTDI_ELV_UTP8_PID 0xE0F5 /* ELV UTP 8 */ +#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ +#define FTDI_ELV_WS444PC_PID 0xE0F7 /* Conrad WS 444 PC */ +#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ +#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ +#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ +#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ +#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ +#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ +#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ +#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ +#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ +#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ +#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ +#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ +/* Additional ELV PIDs that default to using the FTDI D2XX drivers on + * MS Windows, rather than the FTDI Virtual Com Port drivers. + * Maybe these will be easier to use with the libftdi/libusb user-space + * drivers, or possibly the Comedi drivers in some cases. */ +#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ +#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ +#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperatur-Feuchte-Messgeraet (TFM 100) */ +#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkuhr (UDF 77) */ +#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ + +/* + * EVER Eco Pro UPS (http://www.ever.com.pl/) + */ + +#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ + +/* + * Active Robots product ids. + */ +#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ + +/* Pyramid Computer GmbH */ +#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ + +/* www.elsterelectricity.com Elster Unicom III Optical Probe */ +#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ + +/* + * Gude Analog- und Digitalsysteme GmbH + */ +#define FTDI_GUDEADS_E808_PID 0xE808 +#define FTDI_GUDEADS_E809_PID 0xE809 +#define FTDI_GUDEADS_E80A_PID 0xE80A +#define FTDI_GUDEADS_E80B_PID 0xE80B +#define FTDI_GUDEADS_E80C_PID 0xE80C +#define FTDI_GUDEADS_E80D_PID 0xE80D +#define FTDI_GUDEADS_E80E_PID 0xE80E +#define FTDI_GUDEADS_E80F_PID 0xE80F +#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ +#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ +#define FTDI_GUDEADS_E88A_PID 0xE88A +#define FTDI_GUDEADS_E88B_PID 0xE88B +#define FTDI_GUDEADS_E88C_PID 0xE88C +#define FTDI_GUDEADS_E88D_PID 0xE88D +#define FTDI_GUDEADS_E88E_PID 0xE88E +#define FTDI_GUDEADS_E88F_PID 0xE88F + +/* + * Eclo (http://www.eclo.pt/) product IDs. + * PID 0xEA90 submitted by Martin Grill. + */ +#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ + +/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ +#define FTDI_TNC_X_PID 0xEBE0 + +/* + * Teratronik product ids. + * Submitted by O. Wölfelschneider. + */ +#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ +#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ + +/* Rig Expert Ukraine devices */ +#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ + +/* + * Hameg HO820 and HO870 interface (using VID 0x0403) + */ +#define HAMEG_HO820_PID 0xed74 +#define HAMEG_HO730_PID 0xed73 +#define HAMEG_HO720_PID 0xed72 +#define HAMEG_HO870_PID 0xed71 + +/* + * MaxStream devices www.maxstream.net + */ +#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ + +/* + * microHAM product IDs (http://www.microham.com). + * Submitted by Justin Burket (KL1RL) <zorton@jtan.com> + * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>. + * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file. + */ +#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ +#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ +#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ +#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ +#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ +#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ +#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ +#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ + +/* Domintell products http://www.domintell.com */ +#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ +#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ + +/* + * The following are the values for the Perle Systems + * UltraPort USB serial converters + */ +#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ + +/* Sprog II (Andrew Crosland's SprogII DCC interface) */ +#define FTDI_SPROG_II 0xF0C8 + +/* + * Two of the Tagsys RFID Readers + */ +#define FTDI_TAGSYS_LP101_PID 0xF0E9 /* Tagsys L-P101 RFID*/ +#define FTDI_TAGSYS_P200X_PID 0xF0EE /* Tagsys Medio P200x RFID*/ + +/* an infrared receiver for user access control with IR tags */ +#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ + +/* ACT Solutions HomePro ZWave interface + (http://www.act-solutions.com/HomePro-Product-Matrix.html) */ +#define FTDI_ACTZWAVE_PID 0xF2D0 + +/* + * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, + * USB-TTY aktiv, USB-TTY passiv. Some PIDs are used by several devices + * and I'm not entirely sure which are used by which. + */ +#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 +#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 +#define FTDI_4N_GALAXY_DE_3_PID 0xF3C2 + +/* + * Linx Technologies product ids + */ +#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ +#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ +#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ +#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ +#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ + +/* + * Oceanic product ids + */ +#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */ + +/* + * SUUNTO product ids + */ +#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ + +/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ +/* http://www.usbuirt.com/ */ +#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ + +/* CCS Inc. ICDU/ICDU40 product ID - + * the FT232BM is used in an in-circuit-debugger unit for PIC16's/PIC18's */ +#define FTDI_CCSICDU20_0_PID 0xF9D0 +#define FTDI_CCSICDU40_1_PID 0xF9D1 +#define FTDI_CCSMACHX_2_PID 0xF9D2 +#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3 +#define FTDI_CCSICDU64_4_PID 0xF9D4 +#define FTDI_CCSPRIME8_5_PID 0xF9D5 + +/* + * The following are the values for the Matrix Orbital LCD displays, + * which are the FT232BM ( similar to the 8U232AM ) + */ +#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ +#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ + +/* + * Home Electronics (www.home-electro.com) USB gadgets + */ +#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ + +/* Inside Accesso contactless reader (http://www.insidecontactless.com/) */ +#define INSIDE_ACCESSO 0xFAD0 + +/* + * ThorLabs USB motor drivers + */ +#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ + +/* + * Protego product ids + */ +#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ +#define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ +#define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ +#define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ + +/* + * Sony Ericsson product ids + */ +#define FTDI_DSS20_PID 0xFC82 /* DSS-20 Sync Station for Sony Ericsson P800 */ +#define FTDI_URBAN_0_PID 0xFC8A /* Sony Ericsson Urban, uart #0 */ +#define FTDI_URBAN_1_PID 0xFC8B /* Sony Ericsson Urban, uart #1 */ + +/* www.irtrans.de device */ +#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ + +/* + * RM Michaelides CANview USB (http://www.rmcan.com) (FTDI_VID) + * CAN fieldbus interface adapter, added by port GmbH www.port.de) + * Ian Abbott changed the macro names for consistency. + */ +#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ +/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ +#define FTDI_TTUSB_PID 0xFF20 /* Product Id */ + +#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 (FTDI_VID) */ + +#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ + +/* + * PCDJ use ftdi based dj-controllers. The following PID is + * for their DAC-2 device http://www.pcdjhardware.com/DAC2.asp + * (the VID is the standard ftdi vid (FTDI_VID), PID sent by Wouter Paesen) + */ +#define FTDI_PCDJ_DAC2_PID 0xFA88 + +#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG (FTDI_VID) */ + +/* + * DIEBOLD BCS SE923 (FTDI_VID) + */ +#define DIEBOLD_BCS_SE923_PID 0xfb99 + +/* www.crystalfontz.com devices + * - thanx for providing free devices for evaluation ! + * they use the ftdi chipset for the USB interface + * and the vendor id is the same + */ +#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ +#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ +#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ +#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ +#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ +#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ +#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ +#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ + +/* + * Video Networks Limited / Homechoice in the UK use an ftdi-based device + * for their 1Mb broadband internet service. The following PID is exhibited + * by the usb device supplied (the VID is the standard ftdi vid (FTDI_VID) + */ +#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ + +/* AlphaMicro Components AMC-232USB01 device (FTDI_VID) */ +#define FTDI_AMC232_PID 0xFF00 /* Product Id */ + +/* + * IBS elektronik product ids (FTDI_VID) + * Submitted by Thomas Schleusener + */ +#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ +#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ +#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ +#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ +#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ +#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ +#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ +#define FTDI_IBS_PROD_PID 0xff3f /* future device */ +/* www.canusb.com Lawicel CANUSB device (FTDI_VID) */ +#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ + +/* + * TavIR AVR product ids (FTDI_VID) + */ +#define FTDI_TAVIR_STK500_PID 0xFA33 /* STK500 AVR programmer */ + +/* + * TIAO product ids (FTDI_VID) + * http://www.tiaowiki.com/w/Main_Page + */ +#define FTDI_TIAO_UMPA_PID 0x8a98 /* TIAO/DIYGADGET USB Multi-Protocol Adapter */ + +/* + * NovaTech product ids (FTDI_VID) + */ +#define FTDI_NT_ORIONLXM_PID 0x7c90 /* OrionLXm Substation Automation Platform */ + +/* + * Synapse Wireless product ids (FTDI_VID) + * http://www.synapse-wireless.com + */ +#define FTDI_SYNAPSE_SS200_PID 0x9090 /* SS200 - SNAP Stick 200 */ + + +/********************************/ +/** third-party VID/PID combos **/ +/********************************/ + + + +/* + * Atmel STK541 + */ +#define ATMEL_VID 0x03eb /* Vendor ID */ +#define STK541_PID 0x2109 /* Zigbee Controller */ + +/* + * Blackfin gnICE JTAG + * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice + */ +#define ADI_VID 0x0456 +#define ADI_GNICE_PID 0xF000 +#define ADI_GNICEPLUS_PID 0xF001 + +/* + * Microchip Technology, Inc. + * + * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are + * used by single function CDC ACM class based firmware demo + * applications. The VID/PID has also been used in firmware + * emulating FTDI serial chips by: + * Hornby Elite - Digital Command Control Console + * http://www.hornby.com/hornby-dcc/controllers/ + */ +#define MICROCHIP_VID 0x04D8 +#define MICROCHIP_USB_BOARD_PID 0x000A /* CDC RS-232 Emulation Demo */ + +/* + * RATOC REX-USB60F + */ +#define RATOC_VENDOR_ID 0x0584 +#define RATOC_PRODUCT_ID_USB60F 0xb020 + +/* + * Infineon Technologies + */ +#define INFINEON_VID 0x058b +#define INFINEON_TRIBOARD_PID 0x0028 /* DAS JTAG TriBoard TC1798 V1.0 */ + +/* + * Acton Research Corp. + */ +#define ACTON_VID 0x0647 /* Vendor ID */ +#define ACTON_SPECTRAPRO_PID 0x0100 + +/* + * Contec products (http://www.contec.com) + * Submitted by Daniel Sangorrin + */ +#define CONTEC_VID 0x06CE /* Vendor ID */ +#define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */ + +/* + * Mitsubishi Electric Corp. (http://www.meau.com) + * Submitted by Konstantin Holoborodko + */ +#define MITSUBISHI_VID 0x06D3 +#define MITSUBISHI_FXUSB_PID 0x0284 /* USB/RS422 converters: FX-USB-AW/-BD */ + +/* + * Definitions for B&B Electronics products. + */ +#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ +#define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ +#define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ +#define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ +#define BANDB_USOPTL4_PID 0xAC11 +#define BANDB_USPTL4_PID 0xAC12 +#define BANDB_USO9ML2DR_2_PID 0xAC16 +#define BANDB_USO9ML2DR_PID 0xAC17 +#define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */ +#define BANDB_USOPTL4DR_PID 0xAC19 +#define BANDB_485USB9F_2W_PID 0xAC25 +#define BANDB_485USB9F_4W_PID 0xAC26 +#define BANDB_232USB9M_PID 0xAC27 +#define BANDB_485USBTB_2W_PID 0xAC33 +#define BANDB_485USBTB_4W_PID 0xAC34 +#define BANDB_TTL5USB9M_PID 0xAC49 +#define BANDB_TTL3USB9M_PID 0xAC50 +#define BANDB_ZZ_PROG1_USB_PID 0xBA02 + +/* + * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI + */ +#define INTREPID_VID 0x093C +#define INTREPID_VALUECAN_PID 0x0601 +#define INTREPID_NEOVI_PID 0x0701 + +/* + * Definitions for ID TECH (www.idt-net.com) devices + */ +#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ +#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ + +/* + * Definitions for Omnidirectional Control Technology, Inc. devices + */ +#define OCT_VID 0x0B39 /* OCT vendor ID */ +/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ +/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ +/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ +#define OCT_DK201_PID 0x0103 /* OCT DK201 USB docking station */ +#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ + +/* + * Definitions for Icom Inc. devices + */ +#define ICOM_VID 0x0C26 /* Icom vendor ID */ +/* Note: ID-1 is a communications tranceiver for HAM-radio operators */ +#define ICOM_ID_1_PID 0x0004 /* ID-1 USB to RS-232 */ +/* Note: OPC is an Optional cable to connect an Icom Tranceiver */ +#define ICOM_OPC_U_UC_PID 0x0018 /* OPC-478UC, OPC-1122U cloning cable */ +/* Note: ID-RP* devices are Icom Repeater Devices for HAM-radio */ +#define ICOM_ID_RP2C1_PID 0x0009 /* ID-RP2C Asset 1 to RS-232 */ +#define ICOM_ID_RP2C2_PID 0x000A /* ID-RP2C Asset 2 to RS-232 */ +#define ICOM_ID_RP2D_PID 0x000B /* ID-RP2D configuration port*/ +#define ICOM_ID_RP2VT_PID 0x000C /* ID-RP2V Transmit config port */ +#define ICOM_ID_RP2VR_PID 0x000D /* ID-RP2V Receive config port */ +#define ICOM_ID_RP4KVT_PID 0x0010 /* ID-RP4000V Transmit config port */ +#define ICOM_ID_RP4KVR_PID 0x0011 /* ID-RP4000V Receive config port */ +#define ICOM_ID_RP2KVT_PID 0x0012 /* ID-RP2000V Transmit config port */ +#define ICOM_ID_RP2KVR_PID 0x0013 /* ID-RP2000V Receive config port */ + +/* + * GN Otometrics (http://www.otometrics.com) + * Submitted by Ville Sundberg. + */ +#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */ +#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */ + +/* + * The following are the values for the Sealevel SeaLINK+ adapters. + * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and + * removed some PIDs that don't seem to match any existing products.) + */ +#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ +#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ +#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ +#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ +#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ +#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ +#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ +#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ +#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ +#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ +#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ +#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ +#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ +#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ +#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ +#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ +#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ +#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ +#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ +#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ +#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ +#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ +#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ +#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ +#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ +#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ +#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ +#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ +#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ +#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ +#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ +#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ +#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ +#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ +#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ +#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ +#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ +#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ +#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ +#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ +#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ +#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ +#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ +#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ +#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ +#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ +#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ +#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ +#define SEALEVEL_2803R_1_PID 0Xa02a /* SeaLINK+8 (2803-ROHS) Port 1+2 */ +#define SEALEVEL_2803R_2_PID 0Xa02b /* SeaLINK+8 (2803-ROHS) Port 3+4 */ +#define SEALEVEL_2803R_3_PID 0Xa02c /* SeaLINK+8 (2803-ROHS) Port 5+6 */ +#define SEALEVEL_2803R_4_PID 0Xa02d /* SeaLINK+8 (2803-ROHS) Port 7+8 */ + +/* + * JETI SPECTROMETER SPECBOS 1201 + * http://www.jeti.com/cms/index.php/instruments/other-instruments/specbos-2101 + */ +#define JETI_VID 0x0c6c +#define JETI_SPC1201_PID 0x04b2 + +/* + * FTDI USB UART chips used in construction projects from the + * Elektor Electronics magazine (http://www.elektor.com/) + */ +#define ELEKTOR_VID 0x0C7D +#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ + +/* + * Posiflex inc retail equipment (http://www.posiflex.com.tw) + */ +#define POSIFLEX_VID 0x0d3a /* Vendor ID */ +#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ + +/* + * The following are the values for two KOBIL chipcard terminals. + */ +#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ +#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ +#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ + +#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ +#define FTDI_NF_RIC_PID 0x0001 /* Product Id */ + +/* + * Falcom Wireless Communications GmbH + */ +#define FALCOM_VID 0x0F94 /* Vendor Id */ +#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ +#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ + +/* Larsen and Brusgaard AltiTrack/USBtrack */ +#define LARSENBRUSGAARD_VID 0x0FD8 +#define LB_ALTITRACK_PID 0x0001 + +/* + * TTi (Thurlby Thandar Instruments) + */ +#define TTI_VID 0x103E /* Vendor Id */ +#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ + +/* + * Newport Cooperation (www.newport.com) + */ +#define NEWPORT_VID 0x104D +#define NEWPORT_AGILIS_PID 0x3000 +#define NEWPORT_CONEX_CC_PID 0x3002 +#define NEWPORT_CONEX_AGP_PID 0x3006 + +/* Interbiometrics USB I/O Board */ +/* Developed for Interbiometrics by Rudolf Gugler */ +#define INTERBIOMETRICS_VID 0x1209 +#define INTERBIOMETRICS_IOBOARD_PID 0x1002 +#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 + +/* + * Testo products (http://www.testo.com/) + * Submitted by Colin Leroy + */ +#define TESTO_VID 0x128D +#define TESTO_1_PID 0x0001 +#define TESTO_3_PID 0x0003 + +/* + * Mobility Electronics products. + */ +#define MOBILITY_VID 0x1342 +#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ + +/* + * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3 + * Submitted by Harald Welte <laforge@openmoko.org> + */ +#define FIC_VID 0x1457 +#define FIC_NEO1973_DEBUG_PID 0x5118 + +/* Olimex */ +#define OLIMEX_VID 0x15BA +#define OLIMEX_ARM_USB_OCD_PID 0x0003 +#define OLIMEX_ARM_USB_OCD_H_PID 0x002b + +/* + * Telldus Technologies + */ +#define TELLDUS_VID 0x1781 /* Vendor ID */ +#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ + +/* + * NOVITUS printers + */ +#define NOVITUS_VID 0x1a28 +#define NOVITUS_BONO_E_PID 0x6010 + +/* + * RT Systems programming cables for various ham radios + */ +#define RTSYSTEMS_VID 0x2100 /* Vendor ID */ +#define RTSYSTEMS_USB_S03_PID 0x9001 /* RTS-03 USB to Serial Adapter */ +#define RTSYSTEMS_USB_59_PID 0x9e50 /* USB-59 USB to 8 pin plug */ +#define RTSYSTEMS_USB_57A_PID 0x9e51 /* USB-57A USB to 4pin 3.5mm plug */ +#define RTSYSTEMS_USB_57B_PID 0x9e52 /* USB-57B USB to extended 4pin 3.5mm plug */ +#define RTSYSTEMS_USB_29A_PID 0x9e53 /* USB-29A USB to 3.5mm stereo plug */ +#define RTSYSTEMS_USB_29B_PID 0x9e54 /* USB-29B USB to 6 pin mini din */ +#define RTSYSTEMS_USB_29F_PID 0x9e55 /* USB-29F USB to 6 pin modular plug */ +#define RTSYSTEMS_USB_62B_PID 0x9e56 /* USB-62B USB to 8 pin mini din plug*/ +#define RTSYSTEMS_USB_S01_PID 0x9e57 /* USB-RTS01 USB to 3.5 mm stereo plug*/ +#define RTSYSTEMS_USB_63_PID 0x9e58 /* USB-63 USB to 9 pin female*/ +#define RTSYSTEMS_USB_29C_PID 0x9e59 /* USB-29C USB to 4 pin modular plug*/ +#define RTSYSTEMS_USB_81B_PID 0x9e5A /* USB-81 USB to 8 pin mini din plug*/ +#define RTSYSTEMS_USB_82B_PID 0x9e5B /* USB-82 USB to 2.5 mm stereo plug*/ +#define RTSYSTEMS_USB_K5D_PID 0x9e5C /* USB-K5D USB to 8 pin modular plug*/ +#define RTSYSTEMS_USB_K4Y_PID 0x9e5D /* USB-K4Y USB to 2.5/3.5 mm plugs*/ +#define RTSYSTEMS_USB_K5G_PID 0x9e5E /* USB-K5G USB to 8 pin modular plug*/ +#define RTSYSTEMS_USB_S05_PID 0x9e5F /* USB-RTS05 USB to 2.5 mm stereo plug*/ +#define RTSYSTEMS_USB_60_PID 0x9e60 /* USB-60 USB to 6 pin din*/ +#define RTSYSTEMS_USB_61_PID 0x9e61 /* USB-61 USB to 6 pin mini din*/ +#define RTSYSTEMS_USB_62_PID 0x9e62 /* USB-62 USB to 8 pin mini din*/ +#define RTSYSTEMS_USB_63B_PID 0x9e63 /* USB-63 USB to 9 pin female*/ +#define RTSYSTEMS_USB_64_PID 0x9e64 /* USB-64 USB to 9 pin male*/ +#define RTSYSTEMS_USB_65_PID 0x9e65 /* USB-65 USB to 9 pin female null modem*/ +#define RTSYSTEMS_USB_92_PID 0x9e66 /* USB-92 USB to 12 pin plug*/ +#define RTSYSTEMS_USB_92D_PID 0x9e67 /* USB-92D USB to 12 pin plug data*/ +#define RTSYSTEMS_USB_W5R_PID 0x9e68 /* USB-W5R USB to 8 pin modular plug*/ +#define RTSYSTEMS_USB_A5R_PID 0x9e69 /* USB-A5R USB to 8 pin modular plug*/ +#define RTSYSTEMS_USB_PW1_PID 0x9e6A /* USB-PW1 USB to 8 pin modular plug*/ + +/* + * Physik Instrumente + * http://www.physikinstrumente.com/en/products/ + */ +/* These two devices use the VID of FTDI */ +#define PI_C865_PID 0xe0a0 /* PI C-865 Piezomotor Controller */ +#define PI_C857_PID 0xe0a1 /* PI Encoder Trigger Box */ + +#define PI_VID 0x1a72 /* Vendor ID */ +#define PI_C866_PID 0x1000 /* PI C-866 Piezomotor Controller */ +#define PI_C663_PID 0x1001 /* PI C-663 Mercury-Step */ +#define PI_C725_PID 0x1002 /* PI C-725 Piezomotor Controller */ +#define PI_E517_PID 0x1005 /* PI E-517 Digital Piezo Controller Operation Module */ +#define PI_C863_PID 0x1007 /* PI C-863 */ +#define PI_E861_PID 0x1008 /* PI E-861 Piezomotor Controller */ +#define PI_C867_PID 0x1009 /* PI C-867 Piezomotor Controller */ +#define PI_E609_PID 0x100D /* PI E-609 Digital Piezo Controller */ +#define PI_E709_PID 0x100E /* PI E-709 Digital Piezo Controller */ +#define PI_100F_PID 0x100F /* PI Digital Piezo Controller */ +#define PI_1011_PID 0x1011 /* PI Digital Piezo Controller */ +#define PI_1012_PID 0x1012 /* PI Motion Controller */ +#define PI_1013_PID 0x1013 /* PI Motion Controller */ +#define PI_1014_PID 0x1014 /* PI Device */ +#define PI_1015_PID 0x1015 /* PI Device */ +#define PI_1016_PID 0x1016 /* PI Digital Servo Module */ + +/* + * Kondo Kagaku Co.Ltd. + * http://www.kondo-robot.com/EN + */ +#define KONDO_VID 0x165c +#define KONDO_USB_SERIAL_PID 0x0002 + +/* + * Bayer Ascensia Contour blood glucose meter USB-converter cable. + * http://winglucofacts.com/cables/ + */ +#define BAYER_VID 0x1A79 +#define BAYER_CONTOUR_CABLE_PID 0x6001 + +/* + * Matrix Orbital Intelligent USB displays. + * http://www.matrixorbital.com + */ +#define MTXORB_VID 0x1B3D +#define MTXORB_FTDI_RANGE_0100_PID 0x0100 +#define MTXORB_FTDI_RANGE_0101_PID 0x0101 +#define MTXORB_FTDI_RANGE_0102_PID 0x0102 +#define MTXORB_FTDI_RANGE_0103_PID 0x0103 +#define MTXORB_FTDI_RANGE_0104_PID 0x0104 +#define MTXORB_FTDI_RANGE_0105_PID 0x0105 +#define MTXORB_FTDI_RANGE_0106_PID 0x0106 +#define MTXORB_FTDI_RANGE_0107_PID 0x0107 +#define MTXORB_FTDI_RANGE_0108_PID 0x0108 +#define MTXORB_FTDI_RANGE_0109_PID 0x0109 +#define MTXORB_FTDI_RANGE_010A_PID 0x010A +#define MTXORB_FTDI_RANGE_010B_PID 0x010B +#define MTXORB_FTDI_RANGE_010C_PID 0x010C +#define MTXORB_FTDI_RANGE_010D_PID 0x010D +#define MTXORB_FTDI_RANGE_010E_PID 0x010E +#define MTXORB_FTDI_RANGE_010F_PID 0x010F +#define MTXORB_FTDI_RANGE_0110_PID 0x0110 +#define MTXORB_FTDI_RANGE_0111_PID 0x0111 +#define MTXORB_FTDI_RANGE_0112_PID 0x0112 +#define MTXORB_FTDI_RANGE_0113_PID 0x0113 +#define MTXORB_FTDI_RANGE_0114_PID 0x0114 +#define MTXORB_FTDI_RANGE_0115_PID 0x0115 +#define MTXORB_FTDI_RANGE_0116_PID 0x0116 +#define MTXORB_FTDI_RANGE_0117_PID 0x0117 +#define MTXORB_FTDI_RANGE_0118_PID 0x0118 +#define MTXORB_FTDI_RANGE_0119_PID 0x0119 +#define MTXORB_FTDI_RANGE_011A_PID 0x011A +#define MTXORB_FTDI_RANGE_011B_PID 0x011B +#define MTXORB_FTDI_RANGE_011C_PID 0x011C +#define MTXORB_FTDI_RANGE_011D_PID 0x011D +#define MTXORB_FTDI_RANGE_011E_PID 0x011E +#define MTXORB_FTDI_RANGE_011F_PID 0x011F +#define MTXORB_FTDI_RANGE_0120_PID 0x0120 +#define MTXORB_FTDI_RANGE_0121_PID 0x0121 +#define MTXORB_FTDI_RANGE_0122_PID 0x0122 +#define MTXORB_FTDI_RANGE_0123_PID 0x0123 +#define MTXORB_FTDI_RANGE_0124_PID 0x0124 +#define MTXORB_FTDI_RANGE_0125_PID 0x0125 +#define MTXORB_FTDI_RANGE_0126_PID 0x0126 +#define MTXORB_FTDI_RANGE_0127_PID 0x0127 +#define MTXORB_FTDI_RANGE_0128_PID 0x0128 +#define MTXORB_FTDI_RANGE_0129_PID 0x0129 +#define MTXORB_FTDI_RANGE_012A_PID 0x012A +#define MTXORB_FTDI_RANGE_012B_PID 0x012B +#define MTXORB_FTDI_RANGE_012C_PID 0x012C +#define MTXORB_FTDI_RANGE_012D_PID 0x012D +#define MTXORB_FTDI_RANGE_012E_PID 0x012E +#define MTXORB_FTDI_RANGE_012F_PID 0x012F +#define MTXORB_FTDI_RANGE_0130_PID 0x0130 +#define MTXORB_FTDI_RANGE_0131_PID 0x0131 +#define MTXORB_FTDI_RANGE_0132_PID 0x0132 +#define MTXORB_FTDI_RANGE_0133_PID 0x0133 +#define MTXORB_FTDI_RANGE_0134_PID 0x0134 +#define MTXORB_FTDI_RANGE_0135_PID 0x0135 +#define MTXORB_FTDI_RANGE_0136_PID 0x0136 +#define MTXORB_FTDI_RANGE_0137_PID 0x0137 +#define MTXORB_FTDI_RANGE_0138_PID 0x0138 +#define MTXORB_FTDI_RANGE_0139_PID 0x0139 +#define MTXORB_FTDI_RANGE_013A_PID 0x013A +#define MTXORB_FTDI_RANGE_013B_PID 0x013B +#define MTXORB_FTDI_RANGE_013C_PID 0x013C +#define MTXORB_FTDI_RANGE_013D_PID 0x013D +#define MTXORB_FTDI_RANGE_013E_PID 0x013E +#define MTXORB_FTDI_RANGE_013F_PID 0x013F +#define MTXORB_FTDI_RANGE_0140_PID 0x0140 +#define MTXORB_FTDI_RANGE_0141_PID 0x0141 +#define MTXORB_FTDI_RANGE_0142_PID 0x0142 +#define MTXORB_FTDI_RANGE_0143_PID 0x0143 +#define MTXORB_FTDI_RANGE_0144_PID 0x0144 +#define MTXORB_FTDI_RANGE_0145_PID 0x0145 +#define MTXORB_FTDI_RANGE_0146_PID 0x0146 +#define MTXORB_FTDI_RANGE_0147_PID 0x0147 +#define MTXORB_FTDI_RANGE_0148_PID 0x0148 +#define MTXORB_FTDI_RANGE_0149_PID 0x0149 +#define MTXORB_FTDI_RANGE_014A_PID 0x014A +#define MTXORB_FTDI_RANGE_014B_PID 0x014B +#define MTXORB_FTDI_RANGE_014C_PID 0x014C +#define MTXORB_FTDI_RANGE_014D_PID 0x014D +#define MTXORB_FTDI_RANGE_014E_PID 0x014E +#define MTXORB_FTDI_RANGE_014F_PID 0x014F +#define MTXORB_FTDI_RANGE_0150_PID 0x0150 +#define MTXORB_FTDI_RANGE_0151_PID 0x0151 +#define MTXORB_FTDI_RANGE_0152_PID 0x0152 +#define MTXORB_FTDI_RANGE_0153_PID 0x0153 +#define MTXORB_FTDI_RANGE_0154_PID 0x0154 +#define MTXORB_FTDI_RANGE_0155_PID 0x0155 +#define MTXORB_FTDI_RANGE_0156_PID 0x0156 +#define MTXORB_FTDI_RANGE_0157_PID 0x0157 +#define MTXORB_FTDI_RANGE_0158_PID 0x0158 +#define MTXORB_FTDI_RANGE_0159_PID 0x0159 +#define MTXORB_FTDI_RANGE_015A_PID 0x015A +#define MTXORB_FTDI_RANGE_015B_PID 0x015B +#define MTXORB_FTDI_RANGE_015C_PID 0x015C +#define MTXORB_FTDI_RANGE_015D_PID 0x015D +#define MTXORB_FTDI_RANGE_015E_PID 0x015E +#define MTXORB_FTDI_RANGE_015F_PID 0x015F +#define MTXORB_FTDI_RANGE_0160_PID 0x0160 +#define MTXORB_FTDI_RANGE_0161_PID 0x0161 +#define MTXORB_FTDI_RANGE_0162_PID 0x0162 +#define MTXORB_FTDI_RANGE_0163_PID 0x0163 +#define MTXORB_FTDI_RANGE_0164_PID 0x0164 +#define MTXORB_FTDI_RANGE_0165_PID 0x0165 +#define MTXORB_FTDI_RANGE_0166_PID 0x0166 +#define MTXORB_FTDI_RANGE_0167_PID 0x0167 +#define MTXORB_FTDI_RANGE_0168_PID 0x0168 +#define MTXORB_FTDI_RANGE_0169_PID 0x0169 +#define MTXORB_FTDI_RANGE_016A_PID 0x016A +#define MTXORB_FTDI_RANGE_016B_PID 0x016B +#define MTXORB_FTDI_RANGE_016C_PID 0x016C +#define MTXORB_FTDI_RANGE_016D_PID 0x016D +#define MTXORB_FTDI_RANGE_016E_PID 0x016E +#define MTXORB_FTDI_RANGE_016F_PID 0x016F +#define MTXORB_FTDI_RANGE_0170_PID 0x0170 +#define MTXORB_FTDI_RANGE_0171_PID 0x0171 +#define MTXORB_FTDI_RANGE_0172_PID 0x0172 +#define MTXORB_FTDI_RANGE_0173_PID 0x0173 +#define MTXORB_FTDI_RANGE_0174_PID 0x0174 +#define MTXORB_FTDI_RANGE_0175_PID 0x0175 +#define MTXORB_FTDI_RANGE_0176_PID 0x0176 +#define MTXORB_FTDI_RANGE_0177_PID 0x0177 +#define MTXORB_FTDI_RANGE_0178_PID 0x0178 +#define MTXORB_FTDI_RANGE_0179_PID 0x0179 +#define MTXORB_FTDI_RANGE_017A_PID 0x017A +#define MTXORB_FTDI_RANGE_017B_PID 0x017B +#define MTXORB_FTDI_RANGE_017C_PID 0x017C +#define MTXORB_FTDI_RANGE_017D_PID 0x017D +#define MTXORB_FTDI_RANGE_017E_PID 0x017E +#define MTXORB_FTDI_RANGE_017F_PID 0x017F +#define MTXORB_FTDI_RANGE_0180_PID 0x0180 +#define MTXORB_FTDI_RANGE_0181_PID 0x0181 +#define MTXORB_FTDI_RANGE_0182_PID 0x0182 +#define MTXORB_FTDI_RANGE_0183_PID 0x0183 +#define MTXORB_FTDI_RANGE_0184_PID 0x0184 +#define MTXORB_FTDI_RANGE_0185_PID 0x0185 +#define MTXORB_FTDI_RANGE_0186_PID 0x0186 +#define MTXORB_FTDI_RANGE_0187_PID 0x0187 +#define MTXORB_FTDI_RANGE_0188_PID 0x0188 +#define MTXORB_FTDI_RANGE_0189_PID 0x0189 +#define MTXORB_FTDI_RANGE_018A_PID 0x018A +#define MTXORB_FTDI_RANGE_018B_PID 0x018B +#define MTXORB_FTDI_RANGE_018C_PID 0x018C +#define MTXORB_FTDI_RANGE_018D_PID 0x018D +#define MTXORB_FTDI_RANGE_018E_PID 0x018E +#define MTXORB_FTDI_RANGE_018F_PID 0x018F +#define MTXORB_FTDI_RANGE_0190_PID 0x0190 +#define MTXORB_FTDI_RANGE_0191_PID 0x0191 +#define MTXORB_FTDI_RANGE_0192_PID 0x0192 +#define MTXORB_FTDI_RANGE_0193_PID 0x0193 +#define MTXORB_FTDI_RANGE_0194_PID 0x0194 +#define MTXORB_FTDI_RANGE_0195_PID 0x0195 +#define MTXORB_FTDI_RANGE_0196_PID 0x0196 +#define MTXORB_FTDI_RANGE_0197_PID 0x0197 +#define MTXORB_FTDI_RANGE_0198_PID 0x0198 +#define MTXORB_FTDI_RANGE_0199_PID 0x0199 +#define MTXORB_FTDI_RANGE_019A_PID 0x019A +#define MTXORB_FTDI_RANGE_019B_PID 0x019B +#define MTXORB_FTDI_RANGE_019C_PID 0x019C +#define MTXORB_FTDI_RANGE_019D_PID 0x019D +#define MTXORB_FTDI_RANGE_019E_PID 0x019E +#define MTXORB_FTDI_RANGE_019F_PID 0x019F +#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 +#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 +#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 +#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 +#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 +#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 +#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 +#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 +#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 +#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 +#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA +#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB +#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC +#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD +#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE +#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF +#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 +#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 +#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 +#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 +#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 +#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 +#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 +#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 +#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 +#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 +#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA +#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB +#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC +#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD +#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE +#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF +#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 +#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 +#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 +#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 +#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 +#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 +#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 +#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 +#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 +#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 +#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA +#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB +#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC +#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD +#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE +#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF +#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 +#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 +#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 +#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 +#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 +#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 +#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 +#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 +#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 +#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 +#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA +#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB +#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC +#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD +#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE +#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF +#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 +#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 +#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 +#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 +#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 +#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 +#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 +#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 +#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 +#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 +#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA +#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB +#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC +#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED +#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE +#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF +#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 +#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 +#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 +#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 +#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 +#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 +#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 +#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 +#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 +#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 +#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA +#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB +#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC +#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD +#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE +#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF +#define MTXORB_FTDI_RANGE_4701_PID 0x4701 +#define MTXORB_FTDI_RANGE_9300_PID 0x9300 +#define MTXORB_FTDI_RANGE_9301_PID 0x9301 +#define MTXORB_FTDI_RANGE_9302_PID 0x9302 +#define MTXORB_FTDI_RANGE_9303_PID 0x9303 +#define MTXORB_FTDI_RANGE_9304_PID 0x9304 +#define MTXORB_FTDI_RANGE_9305_PID 0x9305 +#define MTXORB_FTDI_RANGE_9306_PID 0x9306 +#define MTXORB_FTDI_RANGE_9307_PID 0x9307 +#define MTXORB_FTDI_RANGE_9308_PID 0x9308 +#define MTXORB_FTDI_RANGE_9309_PID 0x9309 +#define MTXORB_FTDI_RANGE_930A_PID 0x930A +#define MTXORB_FTDI_RANGE_930B_PID 0x930B +#define MTXORB_FTDI_RANGE_930C_PID 0x930C +#define MTXORB_FTDI_RANGE_930D_PID 0x930D +#define MTXORB_FTDI_RANGE_930E_PID 0x930E +#define MTXORB_FTDI_RANGE_930F_PID 0x930F +#define MTXORB_FTDI_RANGE_9310_PID 0x9310 +#define MTXORB_FTDI_RANGE_9311_PID 0x9311 +#define MTXORB_FTDI_RANGE_9312_PID 0x9312 +#define MTXORB_FTDI_RANGE_9313_PID 0x9313 +#define MTXORB_FTDI_RANGE_9314_PID 0x9314 +#define MTXORB_FTDI_RANGE_9315_PID 0x9315 +#define MTXORB_FTDI_RANGE_9316_PID 0x9316 +#define MTXORB_FTDI_RANGE_9317_PID 0x9317 +#define MTXORB_FTDI_RANGE_9318_PID 0x9318 +#define MTXORB_FTDI_RANGE_9319_PID 0x9319 +#define MTXORB_FTDI_RANGE_931A_PID 0x931A +#define MTXORB_FTDI_RANGE_931B_PID 0x931B +#define MTXORB_FTDI_RANGE_931C_PID 0x931C +#define MTXORB_FTDI_RANGE_931D_PID 0x931D +#define MTXORB_FTDI_RANGE_931E_PID 0x931E +#define MTXORB_FTDI_RANGE_931F_PID 0x931F + +/* + * The Mobility Lab (TML) + * Submitted by Pierre Castella + */ +#define TML_VID 0x1B91 /* Vendor ID */ +#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ + +/* Alti-2 products http://www.alti-2.com */ +#define ALTI2_VID 0x1BC9 +#define ALTI2_N3_PID 0x6001 /* Neptune 3 */ + +/* + * Ionics PlugComputer + */ +#define IONICS_VID 0x1c0c +#define IONICS_PLUGCOMPUTER_PID 0x0102 + +/* + * Dresden Elektronik Sensor Terminal Board + */ +#define DE_VID 0x1cf1 /* Vendor ID */ +#define STB_PID 0x0001 /* Sensor Terminal Board */ +#define WHT_PID 0x0004 /* Wireless Handheld Terminal */ + +/* + * STMicroelectonics + */ +#define ST_VID 0x0483 +#define ST_STMCLT_2232_PID 0x3746 +#define ST_STMCLT_4232_PID 0x3747 + +/* + * Papouch products (http://www.papouch.com/) + * Submitted by Folkert van Heusden + */ + +#define PAPOUCH_VID 0x5050 /* Vendor ID */ +#define PAPOUCH_SB485_PID 0x0100 /* Papouch SB485 USB-485/422 Converter */ +#define PAPOUCH_AP485_PID 0x0101 /* AP485 USB-RS485 Converter */ +#define PAPOUCH_SB422_PID 0x0102 /* Papouch SB422 USB-RS422 Converter */ +#define PAPOUCH_SB485_2_PID 0x0103 /* Papouch SB485 USB-485/422 Converter */ +#define PAPOUCH_AP485_2_PID 0x0104 /* AP485 USB-RS485 Converter */ +#define PAPOUCH_SB422_2_PID 0x0105 /* Papouch SB422 USB-RS422 Converter */ +#define PAPOUCH_SB485S_PID 0x0106 /* Papouch SB485S USB-485/422 Converter */ +#define PAPOUCH_SB485C_PID 0x0107 /* Papouch SB485C USB-485/422 Converter */ +#define PAPOUCH_LEC_PID 0x0300 /* LEC USB Converter */ +#define PAPOUCH_SB232_PID 0x0301 /* Papouch SB232 USB-RS232 Converter */ +#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ +#define PAPOUCH_IRAMP_PID 0x0500 /* Papouch IRAmp Duplex */ +#define PAPOUCH_DRAK5_PID 0x0700 /* Papouch DRAK5 */ +#define PAPOUCH_QUIDO8x8_PID 0x0800 /* Papouch Quido 8/8 Module */ +#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Papouch Quido 4/4 Module */ +#define PAPOUCH_QUIDO2x2_PID 0x0a00 /* Papouch Quido 2/2 Module */ +#define PAPOUCH_QUIDO10x1_PID 0x0b00 /* Papouch Quido 10/1 Module */ +#define PAPOUCH_QUIDO30x3_PID 0x0c00 /* Papouch Quido 30/3 Module */ +#define PAPOUCH_QUIDO60x3_PID 0x0d00 /* Papouch Quido 60(100)/3 Module */ +#define PAPOUCH_QUIDO2x16_PID 0x0e00 /* Papouch Quido 2/16 Module */ +#define PAPOUCH_QUIDO3x32_PID 0x0f00 /* Papouch Quido 3/32 Module */ +#define PAPOUCH_DRAK6_PID 0x1000 /* Papouch DRAK6 */ +#define PAPOUCH_UPSUSB_PID 0x8000 /* Papouch UPS-USB adapter */ +#define PAPOUCH_MU_PID 0x8001 /* MU controller */ +#define PAPOUCH_SIMUKEY_PID 0x8002 /* Papouch SimuKey */ +#define PAPOUCH_AD4USB_PID 0x8003 /* AD4USB Measurement Module */ +#define PAPOUCH_GMUX_PID 0x8004 /* Papouch GOLIATH MUX */ +#define PAPOUCH_GMSR_PID 0x8005 /* Papouch GOLIATH MSR */ + +/* + * Marvell SheevaPlug + */ +#define MARVELL_VID 0x9e88 +#define MARVELL_SHEEVAPLUG_PID 0x9e8f + +/* + * Evolution Robotics products (http://www.evolution.com/). + * Submitted by Shawn M. Lavelle. + */ +#define EVOLUTION_VID 0xDEEE /* Vendor ID */ +#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ +#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ +#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ +#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ + +/* + * MJS Gadgets HD Radio / XM Radio / Sirius Radio interfaces (using VID 0x0403) + */ +#define MJSG_GENERIC_PID 0x9378 +#define MJSG_SR_RADIO_PID 0x9379 +#define MJSG_XM_RADIO_PID 0x937A +#define MJSG_HD_RADIO_PID 0x937C + +/* + * D.O.Tec products (http://www.directout.eu) + */ +#define FTDI_DOTEC_PID 0x9868 + +/* + * Xverve Signalyzer tools (http://www.signalyzer.com/) + */ +#define XVERVE_SIGNALYZER_ST_PID 0xBCA0 +#define XVERVE_SIGNALYZER_SLITE_PID 0xBCA1 +#define XVERVE_SIGNALYZER_SH2_PID 0xBCA2 +#define XVERVE_SIGNALYZER_SH4_PID 0xBCA4 + +/* + * Segway Robotic Mobility Platform USB interface (using VID 0x0403) + * Submitted by John G. Rogers + */ +#define SEGWAY_RMP200_PID 0xe729 + + +/* + * Accesio USB Data Acquisition products (http://www.accesio.com/) + */ +#define ACCESIO_COM4SM_PID 0xD578 + +/* www.sciencescope.co.uk educational dataloggers */ +#define FTDI_SCIENCESCOPE_LOGBOOKML_PID 0xFF18 +#define FTDI_SCIENCESCOPE_LS_LOGBOOK_PID 0xFF1C +#define FTDI_SCIENCESCOPE_HS_LOGBOOK_PID 0xFF1D + +/* + * Milkymist One JTAG/Serial + */ +#define QIHARDWARE_VID 0x20B7 +#define MILKYMISTONE_JTAGSERIAL_PID 0x0713 + +/* + * CTI GmbH RS485 Converter http://www.cti-lean.com/ + */ +/* USB-485-Mini*/ +#define FTDI_CTI_MINI_PID 0xF608 +/* USB-Nano-485*/ +#define FTDI_CTI_NANO_PID 0xF60B + +/* + * ZeitControl cardsystems GmbH rfid-readers http://zeitconrol.de + */ +/* TagTracer MIFARE*/ +#define FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID 0xF7C0 + +/* + * Rainforest Automation + */ +/* ZigBee controller */ +#define FTDI_RF_R106 0x8A28 + +/* + * Product: HCP HIT GPRS modem + * Manufacturer: HCP d.o.o. + * ATI command output: Cinterion MC55i + */ +#define FTDI_CINTERION_MC55I_PID 0xA951 + +/* + * Product: Comet Caller ID decoder + * Manufacturer: Crucible Technologies + */ +#define FTDI_CT_COMET_PID 0x8e08 + +/* + * Product: Z3X Box + * Manufacturer: Smart GSM Team + */ +#define FTDI_Z3X_PID 0x0011 + +/* + * Product: Cressi PC Interface + * Manufacturer: Cressi + */ +#define FTDI_CRESSI_PID 0x87d0 + +/* + * Brainboxes devices + */ +#define BRAINBOXES_VID 0x05d1 +#define BRAINBOXES_VX_001_PID 0x1001 /* VX-001 ExpressCard 1 Port RS232 */ +#define BRAINBOXES_VX_012_PID 0x1002 /* VX-012 ExpressCard 2 Port RS232 */ +#define BRAINBOXES_VX_023_PID 0x1003 /* VX-023 ExpressCard 1 Port RS422/485 */ +#define BRAINBOXES_VX_034_PID 0x1004 /* VX-034 ExpressCard 2 Port RS422/485 */ +#define BRAINBOXES_US_101_PID 0x1011 /* US-101 1xRS232 */ +#define BRAINBOXES_US_324_PID 0x1013 /* US-324 1xRS422/485 1Mbaud */ +#define BRAINBOXES_US_606_1_PID 0x2001 /* US-606 6 Port RS232 Serial Port 1 and 2 */ +#define BRAINBOXES_US_606_2_PID 0x2002 /* US-606 6 Port RS232 Serial Port 3 and 4 */ +#define BRAINBOXES_US_606_3_PID 0x2003 /* US-606 6 Port RS232 Serial Port 4 and 6 */ +#define BRAINBOXES_US_701_1_PID 0x2011 /* US-701 4xRS232 1Mbaud Port 1 and 2 */ +#define BRAINBOXES_US_701_2_PID 0x2012 /* US-701 4xRS422 1Mbaud Port 3 and 4 */ +#define BRAINBOXES_US_279_1_PID 0x2021 /* US-279 8xRS422 1Mbaud Port 1 and 2 */ +#define BRAINBOXES_US_279_2_PID 0x2022 /* US-279 8xRS422 1Mbaud Port 3 and 4 */ +#define BRAINBOXES_US_279_3_PID 0x2023 /* US-279 8xRS422 1Mbaud Port 5 and 6 */ +#define BRAINBOXES_US_279_4_PID 0x2024 /* US-279 8xRS422 1Mbaud Port 7 and 8 */ +#define BRAINBOXES_US_346_1_PID 0x3011 /* US-346 4xRS422/485 1Mbaud Port 1 and 2 */ +#define BRAINBOXES_US_346_2_PID 0x3012 /* US-346 4xRS422/485 1Mbaud Port 3 and 4 */ +#define BRAINBOXES_US_257_PID 0x5001 /* US-257 2xRS232 1Mbaud */ +#define BRAINBOXES_US_313_PID 0x6001 /* US-313 2xRS422/485 1Mbaud */ +#define BRAINBOXES_US_357_PID 0x7001 /* US_357 1xRS232/422/485 */ +#define BRAINBOXES_US_842_1_PID 0x8001 /* US-842 8xRS422/485 1Mbaud Port 1 and 2 */ +#define BRAINBOXES_US_842_2_PID 0x8002 /* US-842 8xRS422/485 1Mbaud Port 3 and 4 */ +#define BRAINBOXES_US_842_3_PID 0x8003 /* US-842 8xRS422/485 1Mbaud Port 5 and 6 */ +#define BRAINBOXES_US_842_4_PID 0x8004 /* US-842 8xRS422/485 1Mbaud Port 7 and 8 */ +#define BRAINBOXES_US_160_1_PID 0x9001 /* US-160 16xRS232 1Mbaud Port 1 and 2 */ +#define BRAINBOXES_US_160_2_PID 0x9002 /* US-160 16xRS232 1Mbaud Port 3 and 4 */ +#define BRAINBOXES_US_160_3_PID 0x9003 /* US-160 16xRS232 1Mbaud Port 5 and 6 */ +#define BRAINBOXES_US_160_4_PID 0x9004 /* US-160 16xRS232 1Mbaud Port 7 and 8 */ +#define BRAINBOXES_US_160_5_PID 0x9005 /* US-160 16xRS232 1Mbaud Port 9 and 10 */ +#define BRAINBOXES_US_160_6_PID 0x9006 /* US-160 16xRS232 1Mbaud Port 11 and 12 */ +#define BRAINBOXES_US_160_7_PID 0x9007 /* US-160 16xRS232 1Mbaud Port 13 and 14 */ +#define BRAINBOXES_US_160_8_PID 0x9008 /* US-160 16xRS232 1Mbaud Port 15 and 16 */ + +/* + * ekey biometric systems GmbH (http://ekey.net/) + */ +#define FTDI_EKEY_CONV_USB_PID 0xCB08 /* Converter USB */ + +/* + * GE Healthcare devices + */ +#define GE_HEALTHCARE_VID 0x1901 +#define GE_HEALTHCARE_NEMO_TRACKER_PID 0x0015 + +/* + * Active Research (Actisense) devices + */ +#define ACTISENSE_NDC_PID 0xD9A8 /* NDC USB Serial Adapter */ +#define ACTISENSE_USG_PID 0xD9A9 /* USG USB Serial Adapter */ +#define ACTISENSE_NGT_PID 0xD9AA /* NGT NMEA2000 Interface */ +#define ACTISENSE_NGW_PID 0xD9AB /* NGW NMEA2000 Gateway */ +#define ACTISENSE_D9AC_PID 0xD9AC /* Actisense Reserved */ +#define ACTISENSE_D9AD_PID 0xD9AD /* Actisense Reserved */ +#define ACTISENSE_D9AE_PID 0xD9AE /* Actisense Reserved */ +#define ACTISENSE_D9AF_PID 0xD9AF /* Actisense Reserved */ +#define CHETCO_SEAGAUGE_PID 0xA548 /* SeaGauge USB Adapter */ +#define CHETCO_SEASWITCH_PID 0xA549 /* SeaSwitch USB Adapter */ +#define CHETCO_SEASMART_NMEA2000_PID 0xA54A /* SeaSmart NMEA2000 Gateway */ +#define CHETCO_SEASMART_ETHERNET_PID 0xA54B /* SeaSmart Ethernet Gateway */ +#define CHETCO_SEASMART_WIFI_PID 0xA5AC /* SeaSmart Wifi Gateway */ +#define CHETCO_SEASMART_DISPLAY_PID 0xA5AD /* SeaSmart NMEA2000 Display */ +#define CHETCO_SEASMART_LITE_PID 0xA5AE /* SeaSmart Lite USB Adapter */ +#define CHETCO_SEASMART_ANALOG_PID 0xA5AF /* SeaSmart Analog Adapter */ diff --git a/kernel/drivers/usb/serial/garmin_gps.c b/kernel/drivers/usb/serial/garmin_gps.c new file mode 100644 index 000000000..db591d19d --- /dev/null +++ b/kernel/drivers/usb/serial/garmin_gps.c @@ -0,0 +1,1456 @@ +/* + * Garmin GPS driver + * + * Copyright (C) 2006-2011 Hermann Kneissel herkne@gmx.de + * + * The latest version of the driver can be found at + * http://sourceforge.net/projects/garmin-gps/ + * + * This driver has been derived from v2.1 of the visor driver. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111 USA + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/timer.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/atomic.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +/* the mode to be set when the port ist opened */ +static int initial_mode = 1; + +#define GARMIN_VENDOR_ID 0x091E + +/* + * Version Information + */ + +#define VERSION_MAJOR 0 +#define VERSION_MINOR 36 + +#define _STR(s) #s +#define _DRIVER_VERSION(a, b) "v" _STR(a) "." _STR(b) +#define DRIVER_VERSION _DRIVER_VERSION(VERSION_MAJOR, VERSION_MINOR) +#define DRIVER_AUTHOR "hermann kneissel" +#define DRIVER_DESC "garmin gps driver" + +/* error codes returned by the driver */ +#define EINVPKT 1000 /* invalid packet structure */ + + +/* size of the header of a packet using the usb protocol */ +#define GARMIN_PKTHDR_LENGTH 12 + +/* max. possible size of a packet using the serial protocol */ +#define MAX_SERIAL_PKT_SIZ (3 + 255 + 3) + +/* max. possible size of a packet with worst case stuffing */ +#define MAX_SERIAL_PKT_SIZ_STUFFED (MAX_SERIAL_PKT_SIZ + 256) + +/* size of a buffer able to hold a complete (no stuffing) packet + * (the document protocol does not contain packets with a larger + * size, but in theory a packet may be 64k+12 bytes - if in + * later protocol versions larger packet sizes occur, this value + * should be increased accordingly, so the input buffer is always + * large enough the store a complete packet inclusive header) */ +#define GPS_IN_BUFSIZ (GARMIN_PKTHDR_LENGTH+MAX_SERIAL_PKT_SIZ) + +/* size of a buffer able to hold a complete (incl. stuffing) packet */ +#define GPS_OUT_BUFSIZ (GARMIN_PKTHDR_LENGTH+MAX_SERIAL_PKT_SIZ_STUFFED) + +/* where to place the packet id of a serial packet, so we can + * prepend the usb-packet header without the need to move the + * packets data */ +#define GSP_INITIAL_OFFSET (GARMIN_PKTHDR_LENGTH-2) + +/* max. size of incoming private packets (header+1 param) */ +#define PRIVPKTSIZ (GARMIN_PKTHDR_LENGTH+4) + +#define GARMIN_LAYERID_TRANSPORT 0 +#define GARMIN_LAYERID_APPL 20 +/* our own layer-id to use for some control mechanisms */ +#define GARMIN_LAYERID_PRIVATE 0x01106E4B + +#define GARMIN_PKTID_PVT_DATA 51 +#define GARMIN_PKTID_L001_COMMAND_DATA 10 + +#define CMND_ABORT_TRANSFER 0 + +/* packet ids used in private layer */ +#define PRIV_PKTID_SET_DEBUG 1 +#define PRIV_PKTID_SET_MODE 2 +#define PRIV_PKTID_INFO_REQ 3 +#define PRIV_PKTID_INFO_RESP 4 +#define PRIV_PKTID_RESET_REQ 5 +#define PRIV_PKTID_SET_DEF_MODE 6 + + +#define ETX 0x03 +#define DLE 0x10 +#define ACK 0x06 +#define NAK 0x15 + +/* structure used to queue incoming packets */ +struct garmin_packet { + struct list_head list; + int seq; + /* the real size of the data array, always > 0 */ + int size; + __u8 data[1]; +}; + +/* structure used to keep the current state of the driver */ +struct garmin_data { + __u8 state; + __u16 flags; + __u8 mode; + __u8 count; + __u8 pkt_id; + __u32 serial_num; + struct timer_list timer; + struct usb_serial_port *port; + int seq_counter; + int insize; + int outsize; + __u8 inbuffer [GPS_IN_BUFSIZ]; /* tty -> usb */ + __u8 outbuffer[GPS_OUT_BUFSIZ]; /* usb -> tty */ + __u8 privpkt[4*6]; + spinlock_t lock; + struct list_head pktlist; +}; + + +#define STATE_NEW 0 +#define STATE_INITIAL_DELAY 1 +#define STATE_TIMEOUT 2 +#define STATE_SESSION_REQ1 3 +#define STATE_SESSION_REQ2 4 +#define STATE_ACTIVE 5 + +#define STATE_RESET 8 +#define STATE_DISCONNECTED 9 +#define STATE_WAIT_TTY_ACK 10 +#define STATE_GSP_WAIT_DATA 11 + +#define MODE_NATIVE 0 +#define MODE_GARMIN_SERIAL 1 + +/* Flags used in garmin_data.flags: */ +#define FLAGS_SESSION_REPLY_MASK 0x00C0 +#define FLAGS_SESSION_REPLY1_SEEN 0x0080 +#define FLAGS_SESSION_REPLY2_SEEN 0x0040 +#define FLAGS_BULK_IN_ACTIVE 0x0020 +#define FLAGS_BULK_IN_RESTART 0x0010 +#define FLAGS_THROTTLED 0x0008 +#define APP_REQ_SEEN 0x0004 +#define APP_RESP_SEEN 0x0002 +#define CLEAR_HALT_REQUIRED 0x0001 + +#define FLAGS_QUEUING 0x0100 +#define FLAGS_DROP_DATA 0x0800 + +#define FLAGS_GSP_SKIP 0x1000 +#define FLAGS_GSP_DLESEEN 0x2000 + + + + + + +/* function prototypes */ +static int gsp_next_packet(struct garmin_data *garmin_data_p); +static int garmin_write_bulk(struct usb_serial_port *port, + const unsigned char *buf, int count, + int dismiss_ack); + +/* some special packets to be send or received */ +static unsigned char const GARMIN_START_SESSION_REQ[] + = { 0, 0, 0, 0, 5, 0, 0, 0, 0, 0, 0, 0 }; +static unsigned char const GARMIN_START_SESSION_REPLY[] + = { 0, 0, 0, 0, 6, 0, 0, 0, 4, 0, 0, 0 }; +static unsigned char const GARMIN_BULK_IN_AVAIL_REPLY[] + = { 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0 }; +static unsigned char const GARMIN_APP_LAYER_REPLY[] + = { 0x14, 0, 0, 0 }; +static unsigned char const GARMIN_START_PVT_REQ[] + = { 20, 0, 0, 0, 10, 0, 0, 0, 2, 0, 0, 0, 49, 0 }; +static unsigned char const GARMIN_STOP_PVT_REQ[] + = { 20, 0, 0, 0, 10, 0, 0, 0, 2, 0, 0, 0, 50, 0 }; +static unsigned char const GARMIN_STOP_TRANSFER_REQ[] + = { 20, 0, 0, 0, 10, 0, 0, 0, 2, 0, 0, 0, 0, 0 }; +static unsigned char const GARMIN_STOP_TRANSFER_REQ_V2[] + = { 20, 0, 0, 0, 10, 0, 0, 0, 1, 0, 0, 0, 0 }; +static unsigned char const PRIVATE_REQ[] + = { 0x4B, 0x6E, 0x10, 0x01, 0xFF, 0, 0, 0, 0xFF, 0, 0, 0 }; + + + +static const struct usb_device_id id_table[] = { + /* the same device id seems to be used by all + usb enabled GPS devices */ + { USB_DEVICE(GARMIN_VENDOR_ID, 3) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + + +static inline int getLayerId(const __u8 *usbPacket) +{ + return __le32_to_cpup((__le32 *)(usbPacket)); +} + +static inline int getPacketId(const __u8 *usbPacket) +{ + return __le32_to_cpup((__le32 *)(usbPacket+4)); +} + +static inline int getDataLength(const __u8 *usbPacket) +{ + return __le32_to_cpup((__le32 *)(usbPacket+8)); +} + + +/* + * check if the usb-packet in buf contains an abort-transfer command. + * (if yes, all queued data will be dropped) + */ +static inline int isAbortTrfCmnd(const unsigned char *buf) +{ + if (0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ, + sizeof(GARMIN_STOP_TRANSFER_REQ)) || + 0 == memcmp(buf, GARMIN_STOP_TRANSFER_REQ_V2, + sizeof(GARMIN_STOP_TRANSFER_REQ_V2))) + return 1; + else + return 0; +} + + + +static void send_to_tty(struct usb_serial_port *port, + char *data, unsigned int actual_length) +{ + if (actual_length) { + usb_serial_debug_data(&port->dev, __func__, actual_length, data); + tty_insert_flip_string(&port->port, data, actual_length); + tty_flip_buffer_push(&port->port); + } +} + + +/****************************************************************************** + * packet queue handling + ******************************************************************************/ + +/* + * queue a received (usb-)packet for later processing + */ +static int pkt_add(struct garmin_data *garmin_data_p, + unsigned char *data, unsigned int data_length) +{ + int state = 0; + int result = 0; + unsigned long flags; + struct garmin_packet *pkt; + + /* process only packets containing data ... */ + if (data_length) { + pkt = kmalloc(sizeof(struct garmin_packet)+data_length, + GFP_ATOMIC); + if (!pkt) + return 0; + + pkt->size = data_length; + memcpy(pkt->data, data, data_length); + + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->flags |= FLAGS_QUEUING; + result = list_empty(&garmin_data_p->pktlist); + pkt->seq = garmin_data_p->seq_counter++; + list_add_tail(&pkt->list, &garmin_data_p->pktlist); + state = garmin_data_p->state; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + + dev_dbg(&garmin_data_p->port->dev, + "%s - added: pkt: %d - %d bytes\n", __func__, + pkt->seq, data_length); + + /* in serial mode, if someone is waiting for data from + the device, convert and send the next packet to tty. */ + if (result && (state == STATE_GSP_WAIT_DATA)) + gsp_next_packet(garmin_data_p); + } + return result; +} + + +/* get the next pending packet */ +static struct garmin_packet *pkt_pop(struct garmin_data *garmin_data_p) +{ + unsigned long flags; + struct garmin_packet *result = NULL; + + spin_lock_irqsave(&garmin_data_p->lock, flags); + if (!list_empty(&garmin_data_p->pktlist)) { + result = (struct garmin_packet *)garmin_data_p->pktlist.next; + list_del(&result->list); + } + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + return result; +} + + +/* free up all queued data */ +static void pkt_clear(struct garmin_data *garmin_data_p) +{ + unsigned long flags; + struct garmin_packet *result = NULL; + + spin_lock_irqsave(&garmin_data_p->lock, flags); + while (!list_empty(&garmin_data_p->pktlist)) { + result = (struct garmin_packet *)garmin_data_p->pktlist.next; + list_del(&result->list); + kfree(result); + } + spin_unlock_irqrestore(&garmin_data_p->lock, flags); +} + + +/****************************************************************************** + * garmin serial protocol handling handling + ******************************************************************************/ + +/* send an ack packet back to the tty */ +static int gsp_send_ack(struct garmin_data *garmin_data_p, __u8 pkt_id) +{ + __u8 pkt[10]; + __u8 cksum = 0; + __u8 *ptr = pkt; + unsigned l = 0; + + dev_dbg(&garmin_data_p->port->dev, "%s - pkt-id: 0x%X.\n", __func__, + 0xFF & pkt_id); + + *ptr++ = DLE; + *ptr++ = ACK; + cksum += ACK; + + *ptr++ = 2; + cksum += 2; + + *ptr++ = pkt_id; + cksum += pkt_id; + + if (pkt_id == DLE) + *ptr++ = DLE; + + *ptr++ = 0; + *ptr++ = 0xFF & (-cksum); + *ptr++ = DLE; + *ptr++ = ETX; + + l = ptr-pkt; + + send_to_tty(garmin_data_p->port, pkt, l); + return 0; +} + + + +/* + * called for a complete packet received from tty layer + * + * the complete packet (pktid ... cksum) is in garmin_data_p->inbuf starting + * at GSP_INITIAL_OFFSET. + * + * count - number of bytes in the input buffer including space reserved for + * the usb header: GSP_INITIAL_OFFSET + number of bytes in packet + * (including pkt-id, data-length a. cksum) + */ +static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count) +{ + struct device *dev = &garmin_data_p->port->dev; + unsigned long flags; + const __u8 *recpkt = garmin_data_p->inbuffer+GSP_INITIAL_OFFSET; + __le32 *usbdata = (__le32 *) garmin_data_p->inbuffer; + int cksum = 0; + int n = 0; + int pktid = recpkt[0]; + int size = recpkt[1]; + + usb_serial_debug_data(&garmin_data_p->port->dev, __func__, + count-GSP_INITIAL_OFFSET, recpkt); + + if (size != (count-GSP_INITIAL_OFFSET-3)) { + dev_dbg(dev, "%s - invalid size, expected %d bytes, got %d\n", + __func__, size, (count-GSP_INITIAL_OFFSET-3)); + return -EINVPKT; + } + + cksum += *recpkt++; + cksum += *recpkt++; + + /* sanity check, remove after test ... */ + if ((__u8 *)&(usbdata[3]) != recpkt) { + dev_dbg(dev, "%s - ptr mismatch %p - %p\n", __func__, + &(usbdata[4]), recpkt); + return -EINVPKT; + } + + while (n < size) { + cksum += *recpkt++; + n++; + } + + if ((0xff & (cksum + *recpkt)) != 0) { + dev_dbg(dev, "%s - invalid checksum, expected %02x, got %02x\n", + __func__, 0xff & -cksum, 0xff & *recpkt); + return -EINVPKT; + } + + usbdata[0] = __cpu_to_le32(GARMIN_LAYERID_APPL); + usbdata[1] = __cpu_to_le32(pktid); + usbdata[2] = __cpu_to_le32(size); + + garmin_write_bulk(garmin_data_p->port, garmin_data_p->inbuffer, + GARMIN_PKTHDR_LENGTH+size, 0); + + /* if this was an abort-transfer command, flush all + queued data. */ + if (isAbortTrfCmnd(garmin_data_p->inbuffer)) { + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->flags |= FLAGS_DROP_DATA; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + pkt_clear(garmin_data_p); + } + + return count; +} + + + +/* + * Called for data received from tty + * + * buf contains the data read, it may span more than one packet or even + * incomplete packets + * + * input record should be a serial-record, but it may not be complete. + * Copy it into our local buffer, until an etx is seen (or an error + * occurs). + * Once the record is complete, convert into a usb packet and send it + * to the bulk pipe, send an ack back to the tty. + * + * If the input is an ack, just send the last queued packet to the + * tty layer. + * + * if the input is an abort command, drop all queued data. + */ + +static int gsp_receive(struct garmin_data *garmin_data_p, + const unsigned char *buf, int count) +{ + struct device *dev = &garmin_data_p->port->dev; + unsigned long flags; + int offs = 0; + int ack_or_nak_seen = 0; + __u8 *dest; + int size; + /* dleSeen: set if last byte read was a DLE */ + int dleSeen; + /* skip: if set, skip incoming data until possible start of + * new packet + */ + int skip; + __u8 data; + + spin_lock_irqsave(&garmin_data_p->lock, flags); + dest = garmin_data_p->inbuffer; + size = garmin_data_p->insize; + dleSeen = garmin_data_p->flags & FLAGS_GSP_DLESEEN; + skip = garmin_data_p->flags & FLAGS_GSP_SKIP; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + + /* dev_dbg(dev, "%s - dle=%d skip=%d size=%d count=%d\n", + __func__, dleSeen, skip, size, count); */ + + if (size == 0) + size = GSP_INITIAL_OFFSET; + + while (offs < count) { + + data = *(buf+offs); + offs++; + + if (data == DLE) { + if (skip) { /* start of a new pkt */ + skip = 0; + size = GSP_INITIAL_OFFSET; + dleSeen = 1; + } else if (dleSeen) { + dest[size++] = data; + dleSeen = 0; + } else { + dleSeen = 1; + } + } else if (data == ETX) { + if (dleSeen) { + /* packet complete */ + + data = dest[GSP_INITIAL_OFFSET]; + + if (data == ACK) { + ack_or_nak_seen = ACK; + dev_dbg(dev, "ACK packet complete.\n"); + } else if (data == NAK) { + ack_or_nak_seen = NAK; + dev_dbg(dev, "NAK packet complete.\n"); + } else { + dev_dbg(dev, "packet complete - id=0x%X.\n", + 0xFF & data); + gsp_rec_packet(garmin_data_p, size); + } + + skip = 1; + size = GSP_INITIAL_OFFSET; + dleSeen = 0; + } else { + dest[size++] = data; + } + } else if (!skip) { + + if (dleSeen) { + size = GSP_INITIAL_OFFSET; + dleSeen = 0; + } + + dest[size++] = data; + } + + if (size >= GPS_IN_BUFSIZ) { + dev_dbg(dev, "%s - packet too large.\n", __func__); + skip = 1; + size = GSP_INITIAL_OFFSET; + dleSeen = 0; + } + } + + spin_lock_irqsave(&garmin_data_p->lock, flags); + + garmin_data_p->insize = size; + + /* copy flags back to structure */ + if (skip) + garmin_data_p->flags |= FLAGS_GSP_SKIP; + else + garmin_data_p->flags &= ~FLAGS_GSP_SKIP; + + if (dleSeen) + garmin_data_p->flags |= FLAGS_GSP_DLESEEN; + else + garmin_data_p->flags &= ~FLAGS_GSP_DLESEEN; + + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + + if (ack_or_nak_seen) { + if (gsp_next_packet(garmin_data_p) > 0) + garmin_data_p->state = STATE_ACTIVE; + else + garmin_data_p->state = STATE_GSP_WAIT_DATA; + } + return count; +} + + + +/* + * Sends a usb packet to the tty + * + * Assumes, that all packages and at an usb-packet boundary. + * + * return <0 on error, 0 if packet is incomplete or > 0 if packet was sent + */ +static int gsp_send(struct garmin_data *garmin_data_p, + const unsigned char *buf, int count) +{ + struct device *dev = &garmin_data_p->port->dev; + const unsigned char *src; + unsigned char *dst; + int pktid = 0; + int datalen = 0; + int cksum = 0; + int i = 0; + int k; + + dev_dbg(dev, "%s - state %d - %d bytes.\n", __func__, + garmin_data_p->state, count); + + k = garmin_data_p->outsize; + if ((k+count) > GPS_OUT_BUFSIZ) { + dev_dbg(dev, "packet too large\n"); + garmin_data_p->outsize = 0; + return -4; + } + + memcpy(garmin_data_p->outbuffer+k, buf, count); + k += count; + garmin_data_p->outsize = k; + + if (k >= GARMIN_PKTHDR_LENGTH) { + pktid = getPacketId(garmin_data_p->outbuffer); + datalen = getDataLength(garmin_data_p->outbuffer); + i = GARMIN_PKTHDR_LENGTH + datalen; + if (k < i) + return 0; + } else { + return 0; + } + + dev_dbg(dev, "%s - %d bytes in buffer, %d bytes in pkt.\n", __func__, k, i); + + /* garmin_data_p->outbuffer now contains a complete packet */ + + usb_serial_debug_data(&garmin_data_p->port->dev, __func__, k, + garmin_data_p->outbuffer); + + garmin_data_p->outsize = 0; + + if (GARMIN_LAYERID_APPL != getLayerId(garmin_data_p->outbuffer)) { + dev_dbg(dev, "not an application packet (%d)\n", + getLayerId(garmin_data_p->outbuffer)); + return -1; + } + + if (pktid > 255) { + dev_dbg(dev, "packet-id %d too large\n", pktid); + return -2; + } + + if (datalen > 255) { + dev_dbg(dev, "packet-size %d too large\n", datalen); + return -3; + } + + /* the serial protocol should be able to handle this packet */ + + k = 0; + src = garmin_data_p->outbuffer+GARMIN_PKTHDR_LENGTH; + for (i = 0; i < datalen; i++) { + if (*src++ == DLE) + k++; + } + + src = garmin_data_p->outbuffer+GARMIN_PKTHDR_LENGTH; + if (k > (GARMIN_PKTHDR_LENGTH-2)) { + /* can't add stuffing DLEs in place, move data to end + of buffer ... */ + dst = garmin_data_p->outbuffer+GPS_OUT_BUFSIZ-datalen; + memcpy(dst, src, datalen); + src = dst; + } + + dst = garmin_data_p->outbuffer; + + *dst++ = DLE; + *dst++ = pktid; + cksum += pktid; + *dst++ = datalen; + cksum += datalen; + if (datalen == DLE) + *dst++ = DLE; + + for (i = 0; i < datalen; i++) { + __u8 c = *src++; + *dst++ = c; + cksum += c; + if (c == DLE) + *dst++ = DLE; + } + + cksum = 0xFF & -cksum; + *dst++ = cksum; + if (cksum == DLE) + *dst++ = DLE; + *dst++ = DLE; + *dst++ = ETX; + + i = dst-garmin_data_p->outbuffer; + + send_to_tty(garmin_data_p->port, garmin_data_p->outbuffer, i); + + garmin_data_p->pkt_id = pktid; + garmin_data_p->state = STATE_WAIT_TTY_ACK; + + return i; +} + + +/* + * Process the next pending data packet - if there is one + */ +static int gsp_next_packet(struct garmin_data *garmin_data_p) +{ + int result = 0; + struct garmin_packet *pkt = NULL; + + while ((pkt = pkt_pop(garmin_data_p)) != NULL) { + dev_dbg(&garmin_data_p->port->dev, "%s - next pkt: %d\n", __func__, pkt->seq); + result = gsp_send(garmin_data_p, pkt->data, pkt->size); + if (result > 0) { + kfree(pkt); + return result; + } + kfree(pkt); + } + return result; +} + + + +/****************************************************************************** + * garmin native mode + ******************************************************************************/ + + +/* + * Called for data received from tty + * + * The input data is expected to be in garmin usb-packet format. + * + * buf contains the data read, it may span more than one packet + * or even incomplete packets + */ +static int nat_receive(struct garmin_data *garmin_data_p, + const unsigned char *buf, int count) +{ + unsigned long flags; + __u8 *dest; + int offs = 0; + int result = count; + int len; + + while (offs < count) { + /* if buffer contains header, copy rest of data */ + if (garmin_data_p->insize >= GARMIN_PKTHDR_LENGTH) + len = GARMIN_PKTHDR_LENGTH + +getDataLength(garmin_data_p->inbuffer); + else + len = GARMIN_PKTHDR_LENGTH; + + if (len >= GPS_IN_BUFSIZ) { + /* seems to be an invalid packet, ignore rest + of input */ + dev_dbg(&garmin_data_p->port->dev, + "%s - packet size too large: %d\n", + __func__, len); + garmin_data_p->insize = 0; + count = 0; + result = -EINVPKT; + } else { + len -= garmin_data_p->insize; + if (len > (count-offs)) + len = (count-offs); + if (len > 0) { + dest = garmin_data_p->inbuffer + + garmin_data_p->insize; + memcpy(dest, buf+offs, len); + garmin_data_p->insize += len; + offs += len; + } + } + + /* do we have a complete packet ? */ + if (garmin_data_p->insize >= GARMIN_PKTHDR_LENGTH) { + len = GARMIN_PKTHDR_LENGTH+ + getDataLength(garmin_data_p->inbuffer); + if (garmin_data_p->insize >= len) { + garmin_write_bulk(garmin_data_p->port, + garmin_data_p->inbuffer, + len, 0); + garmin_data_p->insize = 0; + + /* if this was an abort-transfer command, + flush all queued data. */ + if (isAbortTrfCmnd(garmin_data_p->inbuffer)) { + spin_lock_irqsave(&garmin_data_p->lock, + flags); + garmin_data_p->flags |= FLAGS_DROP_DATA; + spin_unlock_irqrestore( + &garmin_data_p->lock, flags); + pkt_clear(garmin_data_p); + } + } + } + } + return result; +} + + +/****************************************************************************** + * private packets + ******************************************************************************/ + +static void priv_status_resp(struct usb_serial_port *port) +{ + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); + __le32 *pkt = (__le32 *)garmin_data_p->privpkt; + + pkt[0] = __cpu_to_le32(GARMIN_LAYERID_PRIVATE); + pkt[1] = __cpu_to_le32(PRIV_PKTID_INFO_RESP); + pkt[2] = __cpu_to_le32(12); + pkt[3] = __cpu_to_le32(VERSION_MAJOR << 16 | VERSION_MINOR); + pkt[4] = __cpu_to_le32(garmin_data_p->mode); + pkt[5] = __cpu_to_le32(garmin_data_p->serial_num); + + send_to_tty(port, (__u8 *)pkt, 6 * 4); +} + + +/****************************************************************************** + * Garmin specific driver functions + ******************************************************************************/ + +static int process_resetdev_request(struct usb_serial_port *port) +{ + unsigned long flags; + int status; + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); + + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->flags &= ~(CLEAR_HALT_REQUIRED); + garmin_data_p->state = STATE_RESET; + garmin_data_p->serial_num = 0; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + + usb_kill_urb(port->interrupt_in_urb); + dev_dbg(&port->dev, "%s - usb_reset_device\n", __func__); + status = usb_reset_device(port->serial->dev); + if (status) + dev_dbg(&port->dev, "%s - usb_reset_device failed: %d\n", + __func__, status); + return status; +} + + + +/* + * clear all cached data + */ +static int garmin_clear(struct garmin_data *garmin_data_p) +{ + unsigned long flags; + int status = 0; + + /* flush all queued data */ + pkt_clear(garmin_data_p); + + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->insize = 0; + garmin_data_p->outsize = 0; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + + return status; +} + + +static int garmin_init_session(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); + int status = 0; + int i = 0; + + if (status == 0) { + usb_kill_urb(port->interrupt_in_urb); + + dev_dbg(&serial->dev->dev, "%s - adding interrupt input\n", __func__); + status = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (status) + dev_err(&serial->dev->dev, + "%s - failed submitting interrupt urb, error %d\n", + __func__, status); + } + + /* + * using the initialization method from gpsbabel. See comments in + * gpsbabel/jeeps/gpslibusb.c gusb_reset_toggles() + */ + if (status == 0) { + dev_dbg(&serial->dev->dev, "%s - starting session ...\n", __func__); + garmin_data_p->state = STATE_ACTIVE; + + for (i = 0; i < 3; i++) { + status = garmin_write_bulk(port, + GARMIN_START_SESSION_REQ, + sizeof(GARMIN_START_SESSION_REQ), 0); + + if (status < 0) + break; + } + + if (status > 0) + status = 0; + } + + return status; +} + + + +static int garmin_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + unsigned long flags; + int status = 0; + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); + + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->mode = initial_mode; + garmin_data_p->count = 0; + garmin_data_p->flags &= FLAGS_SESSION_REPLY1_SEEN; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + + /* shutdown any bulk reads that might be going on */ + usb_kill_urb(port->write_urb); + usb_kill_urb(port->read_urb); + + if (garmin_data_p->state == STATE_RESET) + status = garmin_init_session(port); + + garmin_data_p->state = STATE_ACTIVE; + return status; +} + + +static void garmin_close(struct usb_serial_port *port) +{ + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); + + dev_dbg(&port->dev, "%s - mode=%d state=%d flags=0x%X\n", + __func__, garmin_data_p->mode, garmin_data_p->state, + garmin_data_p->flags); + + garmin_clear(garmin_data_p); + + /* shutdown our urbs */ + usb_kill_urb(port->read_urb); + usb_kill_urb(port->write_urb); + + /* keep reset state so we know that we must start a new session */ + if (garmin_data_p->state != STATE_RESET) + garmin_data_p->state = STATE_DISCONNECTED; +} + + +static void garmin_write_bulk_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + + if (port) { + struct garmin_data *garmin_data_p = + usb_get_serial_port_data(port); + + if (GARMIN_LAYERID_APPL == getLayerId(urb->transfer_buffer)) { + + if (garmin_data_p->mode == MODE_GARMIN_SERIAL) { + gsp_send_ack(garmin_data_p, + ((__u8 *)urb->transfer_buffer)[4]); + } + } + usb_serial_port_softint(port); + } + + /* Ignore errors that resulted from garmin_write_bulk with + dismiss_ack = 1 */ + + /* free up the transfer buffer, as usb_free_urb() does not do this */ + kfree(urb->transfer_buffer); +} + + +static int garmin_write_bulk(struct usb_serial_port *port, + const unsigned char *buf, int count, + int dismiss_ack) +{ + unsigned long flags; + struct usb_serial *serial = port->serial; + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); + struct urb *urb; + unsigned char *buffer; + int status; + + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->flags &= ~FLAGS_DROP_DATA; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + + buffer = kmalloc(count, GFP_ATOMIC); + if (!buffer) + return -ENOMEM; + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + kfree(buffer); + return -ENOMEM; + } + + memcpy(buffer, buf, count); + + usb_serial_debug_data(&port->dev, __func__, count, buffer); + + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, + port->bulk_out_endpointAddress), + buffer, count, + garmin_write_bulk_callback, + dismiss_ack ? NULL : port); + urb->transfer_flags |= URB_ZERO_PACKET; + + if (GARMIN_LAYERID_APPL == getLayerId(buffer)) { + + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->flags |= APP_REQ_SEEN; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + + if (garmin_data_p->mode == MODE_GARMIN_SERIAL) { + pkt_clear(garmin_data_p); + garmin_data_p->state = STATE_GSP_WAIT_DATA; + } + } + + /* send it down the pipe */ + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status) { + dev_err(&port->dev, + "%s - usb_submit_urb(write bulk) failed with status = %d\n", + __func__, status); + count = status; + } + + /* we are done with this urb, so let the host driver + * really free it when it is finished with it */ + usb_free_urb(urb); + + return count; +} + +static int garmin_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + struct device *dev = &port->dev; + int pktid, pktsiz, len; + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); + __le32 *privpkt = (__le32 *)garmin_data_p->privpkt; + + usb_serial_debug_data(dev, __func__, count, buf); + + if (garmin_data_p->state == STATE_RESET) + return -EIO; + + /* check for our private packets */ + if (count >= GARMIN_PKTHDR_LENGTH) { + len = PRIVPKTSIZ; + if (count < len) + len = count; + + memcpy(garmin_data_p->privpkt, buf, len); + + pktsiz = getDataLength(garmin_data_p->privpkt); + pktid = getPacketId(garmin_data_p->privpkt); + + if (count == (GARMIN_PKTHDR_LENGTH+pktsiz) + && GARMIN_LAYERID_PRIVATE == + getLayerId(garmin_data_p->privpkt)) { + + dev_dbg(dev, "%s - processing private request %d\n", + __func__, pktid); + + /* drop all unfinished transfers */ + garmin_clear(garmin_data_p); + + switch (pktid) { + case PRIV_PKTID_SET_MODE: + if (pktsiz != 4) + return -EINVPKT; + garmin_data_p->mode = __le32_to_cpu(privpkt[3]); + dev_dbg(dev, "%s - mode set to %d\n", + __func__, garmin_data_p->mode); + break; + + case PRIV_PKTID_INFO_REQ: + priv_status_resp(port); + break; + + case PRIV_PKTID_RESET_REQ: + process_resetdev_request(port); + break; + + case PRIV_PKTID_SET_DEF_MODE: + if (pktsiz != 4) + return -EINVPKT; + initial_mode = __le32_to_cpu(privpkt[3]); + dev_dbg(dev, "%s - initial_mode set to %d\n", + __func__, + garmin_data_p->mode); + break; + } + return count; + } + } + + if (garmin_data_p->mode == MODE_GARMIN_SERIAL) { + return gsp_receive(garmin_data_p, buf, count); + } else { /* MODE_NATIVE */ + return nat_receive(garmin_data_p, buf, count); + } +} + + +static int garmin_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + /* + * Report back the bytes currently available in the output buffer. + */ + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); + return GPS_OUT_BUFSIZ-garmin_data_p->outsize; +} + + +static void garmin_read_process(struct garmin_data *garmin_data_p, + unsigned char *data, unsigned data_length, + int bulk_data) +{ + unsigned long flags; + + if (garmin_data_p->flags & FLAGS_DROP_DATA) { + /* abort-transfer cmd is active */ + dev_dbg(&garmin_data_p->port->dev, "%s - pkt dropped\n", __func__); + } else if (garmin_data_p->state != STATE_DISCONNECTED && + garmin_data_p->state != STATE_RESET) { + + /* if throttling is active or postprecessing is required + put the received data in the input queue, otherwise + send it directly to the tty port */ + if (garmin_data_p->flags & FLAGS_QUEUING) { + pkt_add(garmin_data_p, data, data_length); + } else if (bulk_data || + getLayerId(data) == GARMIN_LAYERID_APPL) { + + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->flags |= APP_RESP_SEEN; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + + if (garmin_data_p->mode == MODE_GARMIN_SERIAL) { + pkt_add(garmin_data_p, data, data_length); + } else { + send_to_tty(garmin_data_p->port, data, + data_length); + } + } + /* ignore system layer packets ... */ + } +} + + +static void garmin_read_bulk_callback(struct urb *urb) +{ + unsigned long flags; + struct usb_serial_port *port = urb->context; + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + int retval; + + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n", + __func__, status); + return; + } + + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); + + garmin_read_process(garmin_data_p, data, urb->actual_length, 1); + + if (urb->actual_length == 0 && + 0 != (garmin_data_p->flags & FLAGS_BULK_IN_RESTART)) { + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->flags &= ~FLAGS_BULK_IN_RESTART; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + retval = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (retval) + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, retval); + } else if (urb->actual_length > 0) { + /* Continue trying to read until nothing more is received */ + if (0 == (garmin_data_p->flags & FLAGS_THROTTLED)) { + retval = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (retval) + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, retval); + } + } else { + dev_dbg(&port->dev, "%s - end of bulk data\n", __func__); + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->flags &= ~FLAGS_BULK_IN_ACTIVE; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + } +} + + +static void garmin_read_int_callback(struct urb *urb) +{ + unsigned long flags; + int retval; + struct usb_serial_port *port = urb->context; + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", + __func__, status); + return; + } + + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, + urb->transfer_buffer); + + if (urb->actual_length == sizeof(GARMIN_BULK_IN_AVAIL_REPLY) && + 0 == memcmp(data, GARMIN_BULK_IN_AVAIL_REPLY, + sizeof(GARMIN_BULK_IN_AVAIL_REPLY))) { + + dev_dbg(&port->dev, "%s - bulk data available.\n", __func__); + + if (0 == (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) { + + /* bulk data available */ + retval = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (retval) { + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __func__, retval); + } else { + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->flags |= FLAGS_BULK_IN_ACTIVE; + spin_unlock_irqrestore(&garmin_data_p->lock, + flags); + } + } else { + /* bulk-in transfer still active */ + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->flags |= FLAGS_BULK_IN_RESTART; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + } + + } else if (urb->actual_length == (4+sizeof(GARMIN_START_SESSION_REPLY)) + && 0 == memcmp(data, GARMIN_START_SESSION_REPLY, + sizeof(GARMIN_START_SESSION_REPLY))) { + + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->flags |= FLAGS_SESSION_REPLY1_SEEN; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + + /* save the serial number */ + garmin_data_p->serial_num = __le32_to_cpup( + (__le32 *)(data+GARMIN_PKTHDR_LENGTH)); + + dev_dbg(&port->dev, "%s - start-of-session reply seen - serial %u.\n", + __func__, garmin_data_p->serial_num); + } + + garmin_read_process(garmin_data_p, data, urb->actual_length, 0); + + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + dev_err(&urb->dev->dev, + "%s - Error %d submitting interrupt urb\n", + __func__, retval); +} + + +/* + * Sends the next queued packt to the tty port (garmin native mode only) + * and then sets a timer to call itself again until all queued data + * is sent. + */ +static int garmin_flush_queue(struct garmin_data *garmin_data_p) +{ + unsigned long flags; + struct garmin_packet *pkt; + + if ((garmin_data_p->flags & FLAGS_THROTTLED) == 0) { + pkt = pkt_pop(garmin_data_p); + if (pkt != NULL) { + send_to_tty(garmin_data_p->port, pkt->data, pkt->size); + kfree(pkt); + mod_timer(&garmin_data_p->timer, (1)+jiffies); + + } else { + spin_lock_irqsave(&garmin_data_p->lock, flags); + garmin_data_p->flags &= ~FLAGS_QUEUING; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); + } + } + return 0; +} + + +static void garmin_throttle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); + + /* set flag, data received will be put into a queue + for later processing */ + spin_lock_irq(&garmin_data_p->lock); + garmin_data_p->flags |= FLAGS_QUEUING|FLAGS_THROTTLED; + spin_unlock_irq(&garmin_data_p->lock); +} + + +static void garmin_unthrottle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); + int status; + + spin_lock_irq(&garmin_data_p->lock); + garmin_data_p->flags &= ~FLAGS_THROTTLED; + spin_unlock_irq(&garmin_data_p->lock); + + /* in native mode send queued data to tty, in + serial mode nothing needs to be done here */ + if (garmin_data_p->mode == MODE_NATIVE) + garmin_flush_queue(garmin_data_p); + + if (0 != (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) { + status = usb_submit_urb(port->read_urb, GFP_KERNEL); + if (status) + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, status); + } +} + +/* + * The timer is currently only used to send queued packets to + * the tty in cases where the protocol provides no own handshaking + * to initiate the transfer. + */ +static void timeout_handler(unsigned long data) +{ + struct garmin_data *garmin_data_p = (struct garmin_data *) data; + + /* send the next queued packet to the tty port */ + if (garmin_data_p->mode == MODE_NATIVE) + if (garmin_data_p->flags & FLAGS_QUEUING) + garmin_flush_queue(garmin_data_p); +} + + + +static int garmin_port_probe(struct usb_serial_port *port) +{ + int status; + struct garmin_data *garmin_data_p; + + garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL); + if (!garmin_data_p) + return -ENOMEM; + + init_timer(&garmin_data_p->timer); + spin_lock_init(&garmin_data_p->lock); + INIT_LIST_HEAD(&garmin_data_p->pktlist); + /* garmin_data_p->timer.expires = jiffies + session_timeout; */ + garmin_data_p->timer.data = (unsigned long)garmin_data_p; + garmin_data_p->timer.function = timeout_handler; + garmin_data_p->port = port; + garmin_data_p->state = 0; + garmin_data_p->flags = 0; + garmin_data_p->count = 0; + usb_set_serial_port_data(port, garmin_data_p); + + status = garmin_init_session(port); + + return status; +} + + +static int garmin_port_remove(struct usb_serial_port *port) +{ + struct garmin_data *garmin_data_p = usb_get_serial_port_data(port); + + usb_kill_urb(port->interrupt_in_urb); + del_timer_sync(&garmin_data_p->timer); + kfree(garmin_data_p); + return 0; +} + + +/* All of the device info needed */ +static struct usb_serial_driver garmin_device = { + .driver = { + .owner = THIS_MODULE, + .name = "garmin_gps", + }, + .description = "Garmin GPS usb/tty", + .id_table = id_table, + .num_ports = 1, + .open = garmin_open, + .close = garmin_close, + .throttle = garmin_throttle, + .unthrottle = garmin_unthrottle, + .port_probe = garmin_port_probe, + .port_remove = garmin_port_remove, + .write = garmin_write, + .write_room = garmin_write_room, + .write_bulk_callback = garmin_write_bulk_callback, + .read_bulk_callback = garmin_read_bulk_callback, + .read_int_callback = garmin_read_int_callback, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &garmin_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +module_param(initial_mode, int, S_IRUGO); +MODULE_PARM_DESC(initial_mode, "Initial mode"); diff --git a/kernel/drivers/usb/serial/generic.c b/kernel/drivers/usb/serial/generic.c new file mode 100644 index 000000000..54e170dd3 --- /dev/null +++ b/kernel/drivers/usb/serial/generic.c @@ -0,0 +1,628 @@ +/* + * USB Serial Converter Generic functions + * + * Copyright (C) 2010 - 2013 Johan Hovold (jhovold@gmail.com) + * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/sysrq.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/uaccess.h> +#include <linux/kfifo.h> +#include <linux/serial.h> + +#ifdef CONFIG_USB_SERIAL_GENERIC + +static __u16 vendor = 0x05f9; +static __u16 product = 0xffff; + +module_param(vendor, ushort, 0); +MODULE_PARM_DESC(vendor, "User specified USB idVendor"); + +module_param(product, ushort, 0); +MODULE_PARM_DESC(product, "User specified USB idProduct"); + +static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */ + +struct usb_serial_driver usb_serial_generic_device = { + .driver = { + .owner = THIS_MODULE, + .name = "generic", + }, + .id_table = generic_device_ids, + .num_ports = 1, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, + .resume = usb_serial_generic_resume, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &usb_serial_generic_device, NULL +}; + +#endif + +int usb_serial_generic_register(void) +{ + int retval = 0; + +#ifdef CONFIG_USB_SERIAL_GENERIC + generic_device_ids[0].idVendor = vendor; + generic_device_ids[0].idProduct = product; + generic_device_ids[0].match_flags = + USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT; + + retval = usb_serial_register_drivers(serial_drivers, + "usbserial_generic", generic_device_ids); +#endif + return retval; +} + +void usb_serial_generic_deregister(void) +{ +#ifdef CONFIG_USB_SERIAL_GENERIC + usb_serial_deregister_drivers(serial_drivers); +#endif +} + +int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + int result = 0; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + port->throttled = 0; + port->throttle_req = 0; + spin_unlock_irqrestore(&port->lock, flags); + + if (port->bulk_in_size) + result = usb_serial_generic_submit_read_urbs(port, GFP_KERNEL); + + return result; +} +EXPORT_SYMBOL_GPL(usb_serial_generic_open); + +void usb_serial_generic_close(struct usb_serial_port *port) +{ + unsigned long flags; + int i; + + if (port->bulk_out_size) { + for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) + usb_kill_urb(port->write_urbs[i]); + + spin_lock_irqsave(&port->lock, flags); + kfifo_reset_out(&port->write_fifo); + spin_unlock_irqrestore(&port->lock, flags); + } + if (port->bulk_in_size) { + for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) + usb_kill_urb(port->read_urbs[i]); + } +} +EXPORT_SYMBOL_GPL(usb_serial_generic_close); + +int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port, + void *dest, size_t size) +{ + return kfifo_out_locked(&port->write_fifo, dest, size, &port->lock); +} + +/** + * usb_serial_generic_write_start - start writing buffered data + * @port: usb-serial port + * @mem_flags: flags to use for memory allocations + * + * Serialised using USB_SERIAL_WRITE_BUSY flag. + * + * Return: Zero on success or if busy, otherwise a negative errno value. + */ +int usb_serial_generic_write_start(struct usb_serial_port *port, + gfp_t mem_flags) +{ + struct urb *urb; + int count, result; + unsigned long flags; + int i; + + if (test_and_set_bit_lock(USB_SERIAL_WRITE_BUSY, &port->flags)) + return 0; +retry: + spin_lock_irqsave(&port->lock, flags); + if (!port->write_urbs_free || !kfifo_len(&port->write_fifo)) { + clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags); + spin_unlock_irqrestore(&port->lock, flags); + return 0; + } + i = (int)find_first_bit(&port->write_urbs_free, + ARRAY_SIZE(port->write_urbs)); + spin_unlock_irqrestore(&port->lock, flags); + + urb = port->write_urbs[i]; + count = port->serial->type->prepare_write_buffer(port, + urb->transfer_buffer, + port->bulk_out_size); + urb->transfer_buffer_length = count; + usb_serial_debug_data(&port->dev, __func__, count, urb->transfer_buffer); + spin_lock_irqsave(&port->lock, flags); + port->tx_bytes += count; + spin_unlock_irqrestore(&port->lock, flags); + + clear_bit(i, &port->write_urbs_free); + result = usb_submit_urb(urb, mem_flags); + if (result) { + dev_err_console(port, "%s - error submitting urb: %d\n", + __func__, result); + set_bit(i, &port->write_urbs_free); + spin_lock_irqsave(&port->lock, flags); + port->tx_bytes -= count; + spin_unlock_irqrestore(&port->lock, flags); + + clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags); + return result; + } + + goto retry; /* try sending off another urb */ +} +EXPORT_SYMBOL_GPL(usb_serial_generic_write_start); + +/** + * usb_serial_generic_write - generic write function + * @tty: tty for the port + * @port: usb-serial port + * @buf: data to write + * @count: number of bytes to write + * + * Return: The number of characters buffered, which may be anything from + * zero to @count, or a negative errno value. + */ +int usb_serial_generic_write(struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count) +{ + int result; + + if (!port->bulk_out_size) + return -ENODEV; + + if (!count) + return 0; + + count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock); + result = usb_serial_generic_write_start(port, GFP_ATOMIC); + if (result) + return result; + + return count; +} +EXPORT_SYMBOL_GPL(usb_serial_generic_write); + +int usb_serial_generic_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned long flags; + int room; + + if (!port->bulk_out_size) + return 0; + + spin_lock_irqsave(&port->lock, flags); + room = kfifo_avail(&port->write_fifo); + spin_unlock_irqrestore(&port->lock, flags); + + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); + return room; +} + +int usb_serial_generic_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned long flags; + int chars; + + if (!port->bulk_out_size) + return 0; + + spin_lock_irqsave(&port->lock, flags); + chars = kfifo_len(&port->write_fifo) + port->tx_bytes; + spin_unlock_irqrestore(&port->lock, flags); + + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); + return chars; +} +EXPORT_SYMBOL_GPL(usb_serial_generic_chars_in_buffer); + +void usb_serial_generic_wait_until_sent(struct tty_struct *tty, long timeout) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned int bps; + unsigned long period; + unsigned long expire; + + bps = tty_get_baud_rate(tty); + if (!bps) + bps = 9600; /* B0 */ + /* + * Use a poll-period of roughly the time it takes to send one + * character or at least one jiffy. + */ + period = max_t(unsigned long, (10 * HZ / bps), 1); + if (timeout) + period = min_t(unsigned long, period, timeout); + + dev_dbg(&port->dev, "%s - timeout = %u ms, period = %u ms\n", + __func__, jiffies_to_msecs(timeout), + jiffies_to_msecs(period)); + expire = jiffies + timeout; + while (!port->serial->type->tx_empty(port)) { + schedule_timeout_interruptible(period); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, expire)) + break; + } +} +EXPORT_SYMBOL_GPL(usb_serial_generic_wait_until_sent); + +static int usb_serial_generic_submit_read_urb(struct usb_serial_port *port, + int index, gfp_t mem_flags) +{ + int res; + + if (!test_and_clear_bit(index, &port->read_urbs_free)) + return 0; + + dev_dbg(&port->dev, "%s - urb %d\n", __func__, index); + + res = usb_submit_urb(port->read_urbs[index], mem_flags); + if (res) { + if (res != -EPERM && res != -ENODEV) { + dev_err(&port->dev, + "%s - usb_submit_urb failed: %d\n", + __func__, res); + } + set_bit(index, &port->read_urbs_free); + return res; + } + + return 0; +} + +int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port, + gfp_t mem_flags) +{ + int res; + int i; + + for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) { + res = usb_serial_generic_submit_read_urb(port, i, mem_flags); + if (res) + goto err; + } + + return 0; +err: + for (; i >= 0; --i) + usb_kill_urb(port->read_urbs[i]); + + return res; +} +EXPORT_SYMBOL_GPL(usb_serial_generic_submit_read_urbs); + +void usb_serial_generic_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + char *ch = (char *)urb->transfer_buffer; + int i; + + if (!urb->actual_length) + return; + /* + * The per character mucking around with sysrq path it too slow for + * stuff like 3G modems, so shortcircuit it in the 99.9999999% of + * cases where the USB serial is not a console anyway. + */ + if (!port->port.console || !port->sysrq) { + tty_insert_flip_string(&port->port, ch, urb->actual_length); + } else { + for (i = 0; i < urb->actual_length; i++, ch++) { + if (!usb_serial_handle_sysrq_char(port, *ch)) + tty_insert_flip_char(&port->port, *ch, TTY_NORMAL); + } + } + tty_flip_buffer_push(&port->port); +} +EXPORT_SYMBOL_GPL(usb_serial_generic_process_read_urb); + +void usb_serial_generic_read_bulk_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + unsigned long flags; + int i; + + for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) { + if (urb == port->read_urbs[i]) + break; + } + set_bit(i, &port->read_urbs_free); + + dev_dbg(&port->dev, "%s - urb %d, len %d\n", __func__, i, + urb->actual_length); + switch (urb->status) { + case 0: + break; + case -ENOENT: + case -ECONNRESET: + case -ESHUTDOWN: + dev_dbg(&port->dev, "%s - urb stopped: %d\n", + __func__, urb->status); + return; + case -EPIPE: + dev_err(&port->dev, "%s - urb stopped: %d\n", + __func__, urb->status); + return; + default: + dev_dbg(&port->dev, "%s - nonzero urb status: %d\n", + __func__, urb->status); + goto resubmit; + } + + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); + port->serial->type->process_read_urb(urb); + +resubmit: + /* Throttle the device if requested by tty */ + spin_lock_irqsave(&port->lock, flags); + port->throttled = port->throttle_req; + if (!port->throttled) { + spin_unlock_irqrestore(&port->lock, flags); + usb_serial_generic_submit_read_urb(port, i, GFP_ATOMIC); + } else { + spin_unlock_irqrestore(&port->lock, flags); + } +} +EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback); + +void usb_serial_generic_write_bulk_callback(struct urb *urb) +{ + unsigned long flags; + struct usb_serial_port *port = urb->context; + int i; + + for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) { + if (port->write_urbs[i] == urb) + break; + } + spin_lock_irqsave(&port->lock, flags); + port->tx_bytes -= urb->transfer_buffer_length; + set_bit(i, &port->write_urbs_free); + spin_unlock_irqrestore(&port->lock, flags); + + switch (urb->status) { + case 0: + break; + case -ENOENT: + case -ECONNRESET: + case -ESHUTDOWN: + dev_dbg(&port->dev, "%s - urb stopped: %d\n", + __func__, urb->status); + return; + case -EPIPE: + dev_err_console(port, "%s - urb stopped: %d\n", + __func__, urb->status); + return; + default: + dev_err_console(port, "%s - nonzero urb status: %d\n", + __func__, urb->status); + goto resubmit; + } + +resubmit: + usb_serial_generic_write_start(port, GFP_ATOMIC); + usb_serial_port_softint(port); +} +EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback); + +void usb_serial_generic_throttle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + port->throttle_req = 1; + spin_unlock_irqrestore(&port->lock, flags); +} +EXPORT_SYMBOL_GPL(usb_serial_generic_throttle); + +void usb_serial_generic_unthrottle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + int was_throttled; + + spin_lock_irq(&port->lock); + was_throttled = port->throttled; + port->throttled = port->throttle_req = 0; + spin_unlock_irq(&port->lock); + + if (was_throttled) + usb_serial_generic_submit_read_urbs(port, GFP_KERNEL); +} +EXPORT_SYMBOL_GPL(usb_serial_generic_unthrottle); + +static bool usb_serial_generic_msr_changed(struct tty_struct *tty, + unsigned long arg, struct async_icount *cprev) +{ + struct usb_serial_port *port = tty->driver_data; + struct async_icount cnow; + unsigned long flags; + bool ret; + + /* + * Use tty-port initialised flag to detect all hangups including the + * one generated at USB-device disconnect. + */ + if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) + return true; + + spin_lock_irqsave(&port->lock, flags); + cnow = port->icount; /* atomic copy*/ + spin_unlock_irqrestore(&port->lock, flags); + + ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts)); + + *cprev = cnow; + + return ret; +} + +int usb_serial_generic_tiocmiwait(struct tty_struct *tty, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + struct async_icount cnow; + unsigned long flags; + int ret; + + spin_lock_irqsave(&port->lock, flags); + cnow = port->icount; /* atomic copy */ + spin_unlock_irqrestore(&port->lock, flags); + + ret = wait_event_interruptible(port->port.delta_msr_wait, + usb_serial_generic_msr_changed(tty, arg, &cnow)); + if (!ret && !test_bit(ASYNCB_INITIALIZED, &port->port.flags)) + ret = -EIO; + + return ret; +} +EXPORT_SYMBOL_GPL(usb_serial_generic_tiocmiwait); + +int usb_serial_generic_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + struct usb_serial_port *port = tty->driver_data; + struct async_icount cnow; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + cnow = port->icount; /* atomic copy */ + spin_unlock_irqrestore(&port->lock, flags); + + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + icount->tx = cnow.tx; + icount->rx = cnow.rx; + icount->frame = cnow.frame; + icount->parity = cnow.parity; + icount->overrun = cnow.overrun; + icount->brk = cnow.brk; + icount->buf_overrun = cnow.buf_overrun; + + return 0; +} +EXPORT_SYMBOL_GPL(usb_serial_generic_get_icount); + +#ifdef CONFIG_MAGIC_SYSRQ +int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch) +{ + if (port->sysrq && port->port.console) { + if (ch && time_before(jiffies, port->sysrq)) { + handle_sysrq(ch); + port->sysrq = 0; + return 1; + } + port->sysrq = 0; + } + return 0; +} +#else +int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch) +{ + return 0; +} +#endif +EXPORT_SYMBOL_GPL(usb_serial_handle_sysrq_char); + +int usb_serial_handle_break(struct usb_serial_port *port) +{ + if (!port->sysrq) { + port->sysrq = jiffies + HZ*5; + return 1; + } + port->sysrq = 0; + return 0; +} +EXPORT_SYMBOL_GPL(usb_serial_handle_break); + +/** + * usb_serial_handle_dcd_change - handle a change of carrier detect state + * @port: usb-serial port + * @tty: tty for the port + * @status: new carrier detect status, nonzero if active + */ +void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port, + struct tty_struct *tty, unsigned int status) +{ + struct tty_port *port = &usb_port->port; + + dev_dbg(&usb_port->dev, "%s - status %d\n", __func__, status); + + if (tty) { + struct tty_ldisc *ld = tty_ldisc_ref(tty); + + if (ld) { + if (ld->ops->dcd_change) + ld->ops->dcd_change(tty, status); + tty_ldisc_deref(ld); + } + } + + if (status) + wake_up_interruptible(&port->open_wait); + else if (tty && !C_CLOCAL(tty)) + tty_hangup(tty); +} +EXPORT_SYMBOL_GPL(usb_serial_handle_dcd_change); + +int usb_serial_generic_resume(struct usb_serial *serial) +{ + struct usb_serial_port *port; + int i, c = 0, r; + + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) + continue; + + if (port->bulk_in_size) { + r = usb_serial_generic_submit_read_urbs(port, + GFP_NOIO); + if (r < 0) + c++; + } + + if (port->bulk_out_size) { + r = usb_serial_generic_write_start(port, GFP_NOIO); + if (r < 0) + c++; + } + } + + return c ? -EIO : 0; +} +EXPORT_SYMBOL_GPL(usb_serial_generic_resume); diff --git a/kernel/drivers/usb/serial/io_16654.h b/kernel/drivers/usb/serial/io_16654.h new file mode 100644 index 000000000..a53abc953 --- /dev/null +++ b/kernel/drivers/usb/serial/io_16654.h @@ -0,0 +1,195 @@ +/************************************************************************ + * + * 16654.H Definitions for 16C654 UART used on EdgePorts + * + * Copyright (C) 1998 Inside Out Networks, Inc. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + ************************************************************************/ + +#if !defined(_16654_H) +#define _16654_H + +/************************************************************************ + * + * D e f i n e s / T y p e d e f s + * + ************************************************************************/ + + // + // UART register numbers + // Numbers 0-7 are passed to the Edgeport directly. Numbers 8 and + // above are used internally to indicate that we must enable access + // to them via LCR bit 0x80 or LCR = 0xBF. + // The register number sent to the Edgeport is then (x & 0x7). + // + // Driver must not access registers that affect operation of the + // the EdgePort firmware -- that includes THR, RHR, IER, FCR. + + +#define THR 0 // ! Transmit Holding Register (Write) +#define RDR 0 // ! Receive Holding Register (Read) +#define IER 1 // ! Interrupt Enable Register +#define FCR 2 // ! Fifo Control Register (Write) +#define ISR 2 // Interrupt Status Register (Read) +#define LCR 3 // Line Control Register +#define MCR 4 // Modem Control Register +#define LSR 5 // Line Status Register +#define MSR 6 // Modem Status Register +#define SPR 7 // ScratchPad Register +#define DLL 8 // Bank2[ 0 ] Divisor Latch LSB +#define DLM 9 // Bank2[ 1 ] Divisor Latch MSB +#define EFR 10 // Bank2[ 2 ] Extended Function Register +//efine unused 11 // Bank2[ 3 ] +#define XON1 12 // Bank2[ 4 ] Xon-1 +#define XON2 13 // Bank2[ 5 ] Xon-2 +#define XOFF1 14 // Bank2[ 6 ] Xoff-1 +#define XOFF2 15 // Bank2[ 7 ] Xoff-2 + +#define NUM_16654_REGS 16 + +#define IS_REG_2ND_BANK(x) ((x) >= 8) + + // + // Bit definitions for each register + // + +#define IER_RX 0x01 // Enable receive interrupt +#define IER_TX 0x02 // Enable transmit interrupt +#define IER_RXS 0x04 // Enable receive status interrupt +#define IER_MDM 0x08 // Enable modem status interrupt +#define IER_SLEEP 0x10 // Enable sleep mode +#define IER_XOFF 0x20 // Enable s/w flow control (XOFF) interrupt +#define IER_RTS 0x40 // Enable RTS interrupt +#define IER_CTS 0x80 // Enable CTS interrupt +#define IER_ENABLE_ALL 0xFF // Enable all ints + + +#define FCR_FIFO_EN 0x01 // Enable FIFOs +#define FCR_RXCLR 0x02 // Reset Rx FIFO +#define FCR_TXCLR 0x04 // Reset Tx FIFO +#define FCR_DMA_BLK 0x08 // Enable DMA block mode +#define FCR_TX_LEVEL_MASK 0x30 // Mask for Tx FIFO Level +#define FCR_TX_LEVEL_8 0x00 // Tx FIFO Level = 8 bytes +#define FCR_TX_LEVEL_16 0x10 // Tx FIFO Level = 16 bytes +#define FCR_TX_LEVEL_32 0x20 // Tx FIFO Level = 32 bytes +#define FCR_TX_LEVEL_56 0x30 // Tx FIFO Level = 56 bytes +#define FCR_RX_LEVEL_MASK 0xC0 // Mask for Rx FIFO Level +#define FCR_RX_LEVEL_8 0x00 // Rx FIFO Level = 8 bytes +#define FCR_RX_LEVEL_16 0x40 // Rx FIFO Level = 16 bytes +#define FCR_RX_LEVEL_56 0x80 // Rx FIFO Level = 56 bytes +#define FCR_RX_LEVEL_60 0xC0 // Rx FIFO Level = 60 bytes + + +#define ISR_INT_MDM_STATUS 0x00 // Modem status int pending +#define ISR_INT_NONE 0x01 // No interrupt pending +#define ISR_INT_TXRDY 0x02 // Tx ready int pending +#define ISR_INT_RXRDY 0x04 // Rx ready int pending +#define ISR_INT_LINE_STATUS 0x06 // Line status int pending +#define ISR_INT_RX_TIMEOUT 0x0C // Rx timeout int pending +#define ISR_INT_RX_XOFF 0x10 // Rx Xoff int pending +#define ISR_INT_RTS_CTS 0x20 // RTS/CTS change int pending +#define ISR_FIFO_ENABLED 0xC0 // Bits set if FIFOs enabled +#define ISR_INT_BITS_MASK 0x3E // Mask to isolate valid int causes + + +#define LCR_BITS_5 0x00 // 5 bits/char +#define LCR_BITS_6 0x01 // 6 bits/char +#define LCR_BITS_7 0x02 // 7 bits/char +#define LCR_BITS_8 0x03 // 8 bits/char +#define LCR_BITS_MASK 0x03 // Mask for bits/char field + +#define LCR_STOP_1 0x00 // 1 stop bit +#define LCR_STOP_1_5 0x04 // 1.5 stop bits (if 5 bits/char) +#define LCR_STOP_2 0x04 // 2 stop bits (if 6-8 bits/char) +#define LCR_STOP_MASK 0x04 // Mask for stop bits field + +#define LCR_PAR_NONE 0x00 // No parity +#define LCR_PAR_ODD 0x08 // Odd parity +#define LCR_PAR_EVEN 0x18 // Even parity +#define LCR_PAR_MARK 0x28 // Force parity bit to 1 +#define LCR_PAR_SPACE 0x38 // Force parity bit to 0 +#define LCR_PAR_MASK 0x38 // Mask for parity field + +#define LCR_SET_BREAK 0x40 // Set Break condition +#define LCR_DL_ENABLE 0x80 // Enable access to divisor latch + +#define LCR_ACCESS_EFR 0xBF // Load this value to access DLL,DLM, + // and also the '654-only registers + // EFR, XON1, XON2, XOFF1, XOFF2 + + +#define MCR_DTR 0x01 // Assert DTR +#define MCR_RTS 0x02 // Assert RTS +#define MCR_OUT1 0x04 // Loopback only: Sets state of RI +#define MCR_MASTER_IE 0x08 // Enable interrupt outputs +#define MCR_LOOPBACK 0x10 // Set internal (digital) loopback mode +#define MCR_XON_ANY 0x20 // Enable any char to exit XOFF mode +#define MCR_IR_ENABLE 0x40 // Enable IrDA functions +#define MCR_BRG_DIV_4 0x80 // Divide baud rate clk by /4 instead of /1 + + +#define LSR_RX_AVAIL 0x01 // Rx data available +#define LSR_OVER_ERR 0x02 // Rx overrun +#define LSR_PAR_ERR 0x04 // Rx parity error +#define LSR_FRM_ERR 0x08 // Rx framing error +#define LSR_BREAK 0x10 // Rx break condition detected +#define LSR_TX_EMPTY 0x20 // Tx Fifo empty +#define LSR_TX_ALL_EMPTY 0x40 // Tx Fifo and shift register empty +#define LSR_FIFO_ERR 0x80 // Rx Fifo contains at least 1 erred char + + +#define EDGEPORT_MSR_DELTA_CTS 0x01 // CTS changed from last read +#define EDGEPORT_MSR_DELTA_DSR 0x02 // DSR changed from last read +#define EDGEPORT_MSR_DELTA_RI 0x04 // RI changed from 0 -> 1 +#define EDGEPORT_MSR_DELTA_CD 0x08 // CD changed from last read +#define EDGEPORT_MSR_CTS 0x10 // Current state of CTS +#define EDGEPORT_MSR_DSR 0x20 // Current state of DSR +#define EDGEPORT_MSR_RI 0x40 // Current state of RI +#define EDGEPORT_MSR_CD 0x80 // Current state of CD + + + + // Tx Rx + //------------------------------- +#define EFR_SWFC_NONE 0x00 // None None +#define EFR_SWFC_RX1 0x02 // None XOFF1 +#define EFR_SWFC_RX2 0x01 // None XOFF2 +#define EFR_SWFC_RX12 0x03 // None XOFF1 & XOFF2 +#define EFR_SWFC_TX1 0x08 // XOFF1 None +#define EFR_SWFC_TX1_RX1 0x0a // XOFF1 XOFF1 +#define EFR_SWFC_TX1_RX2 0x09 // XOFF1 XOFF2 +#define EFR_SWFC_TX1_RX12 0x0b // XOFF1 XOFF1 & XOFF2 +#define EFR_SWFC_TX2 0x04 // XOFF2 None +#define EFR_SWFC_TX2_RX1 0x06 // XOFF2 XOFF1 +#define EFR_SWFC_TX2_RX2 0x05 // XOFF2 XOFF2 +#define EFR_SWFC_TX2_RX12 0x07 // XOFF2 XOFF1 & XOFF2 +#define EFR_SWFC_TX12 0x0c // XOFF1 & XOFF2 None +#define EFR_SWFC_TX12_RX1 0x0e // XOFF1 & XOFF2 XOFF1 +#define EFR_SWFC_TX12_RX2 0x0d // XOFF1 & XOFF2 XOFF2 +#define EFR_SWFC_TX12_RX12 0x0f // XOFF1 & XOFF2 XOFF1 & XOFF2 + +#define EFR_TX_FC_MASK 0x0c // Mask to isolate Rx flow control +#define EFR_TX_FC_NONE 0x00 // No Tx Xon/Xoff flow control +#define EFR_TX_FC_X1 0x08 // Transmit Xon1/Xoff1 +#define EFR_TX_FC_X2 0x04 // Transmit Xon2/Xoff2 +#define EFR_TX_FC_X1_2 0x0c // Transmit Xon1&2/Xoff1&2 + +#define EFR_RX_FC_MASK 0x03 // Mask to isolate Rx flow control +#define EFR_RX_FC_NONE 0x00 // No Rx Xon/Xoff flow control +#define EFR_RX_FC_X1 0x02 // Receiver compares Xon1/Xoff1 +#define EFR_RX_FC_X2 0x01 // Receiver compares Xon2/Xoff2 +#define EFR_RX_FC_X1_2 0x03 // Receiver compares Xon1&2/Xoff1&2 + + +#define EFR_SWFC_MASK 0x0F // Mask for software flow control field +#define EFR_ENABLE_16654 0x10 // Enable 16C654 features +#define EFR_SPEC_DETECT 0x20 // Enable special character detect interrupt +#define EFR_AUTO_RTS 0x40 // Use RTS for Rx flow control +#define EFR_AUTO_CTS 0x80 // Use CTS for Tx flow control + +#endif // if !defined(_16654_H) + diff --git a/kernel/drivers/usb/serial/io_edgeport.c b/kernel/drivers/usb/serial/io_edgeport.c new file mode 100644 index 000000000..c0866971d --- /dev/null +++ b/kernel/drivers/usb/serial/io_edgeport.c @@ -0,0 +1,3011 @@ +/* + * Edgeport USB Serial Converter driver + * + * Copyright (C) 2000 Inside Out Networks, All rights reserved. + * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Supports the following devices: + * Edgeport/4 + * Edgeport/4t + * Edgeport/2 + * Edgeport/4i + * Edgeport/2i + * Edgeport/421 + * Edgeport/21 + * Rapidport/4 + * Edgeport/8 + * Edgeport/2D8 + * Edgeport/4D8 + * Edgeport/8i + * + * For questions or problems with this driver, contact Inside Out + * Networks technical support, or Peter Berger <pberger@brimson.com>, + * or Al Borchers <alborchers@steinerpoint.com>. + * + */ + +#include <linux/kernel.h> +#include <linux/jiffies.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/serial.h> +#include <linux/ioctl.h> +#include <linux/wait.h> +#include <linux/firmware.h> +#include <linux/ihex.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include "io_edgeport.h" +#include "io_ionsp.h" /* info for the iosp messages */ +#include "io_16654.h" /* 16654 UART defines */ + +#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli" +#define DRIVER_DESC "Edgeport USB Serial Driver" + +#define MAX_NAME_LEN 64 + +#define OPEN_TIMEOUT (5*HZ) /* 5 seconds */ + +/* receive port state */ +enum RXSTATE { + EXPECT_HDR1 = 0, /* Expect header byte 1 */ + EXPECT_HDR2 = 1, /* Expect header byte 2 */ + EXPECT_DATA = 2, /* Expect 'RxBytesRemaining' data */ + EXPECT_HDR3 = 3, /* Expect header byte 3 (for status hdrs only) */ +}; + + +/* Transmit Fifo + * This Transmit queue is an extension of the edgeport Rx buffer. + * The maximum amount of data buffered in both the edgeport + * Rx buffer (maxTxCredits) and this buffer will never exceed maxTxCredits. + */ +struct TxFifo { + unsigned int head; /* index to head pointer (write) */ + unsigned int tail; /* index to tail pointer (read) */ + unsigned int count; /* Bytes in queue */ + unsigned int size; /* Max size of queue (equal to Max number of TxCredits) */ + unsigned char *fifo; /* allocated Buffer */ +}; + +/* This structure holds all of the local port information */ +struct edgeport_port { + __u16 txCredits; /* our current credits for this port */ + __u16 maxTxCredits; /* the max size of the port */ + + struct TxFifo txfifo; /* transmit fifo -- size will be maxTxCredits */ + struct urb *write_urb; /* write URB for this port */ + bool write_in_progress; /* 'true' while a write URB is outstanding */ + spinlock_t ep_lock; + + __u8 shadowLCR; /* last LCR value received */ + __u8 shadowMCR; /* last MCR value received */ + __u8 shadowMSR; /* last MSR value received */ + __u8 shadowLSR; /* last LSR value received */ + __u8 shadowXonChar; /* last value set as XON char in Edgeport */ + __u8 shadowXoffChar; /* last value set as XOFF char in Edgeport */ + __u8 validDataMask; + __u32 baudRate; + + bool open; + bool openPending; + bool commandPending; + bool closePending; + bool chaseResponsePending; + + wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */ + wait_queue_head_t wait_open; /* for handling sleeping while waiting for open to finish */ + wait_queue_head_t wait_command; /* for handling sleeping while waiting for command to finish */ + + struct usb_serial_port *port; /* loop back to the owner of this object */ +}; + + +/* This structure holds all of the individual device information */ +struct edgeport_serial { + char name[MAX_NAME_LEN+2]; /* string name of this device */ + + struct edge_manuf_descriptor manuf_descriptor; /* the manufacturer descriptor */ + struct edge_boot_descriptor boot_descriptor; /* the boot firmware descriptor */ + struct edgeport_product_info product_info; /* Product Info */ + struct edge_compatibility_descriptor epic_descriptor; /* Edgeport compatible descriptor */ + int is_epic; /* flag if EPiC device or not */ + + __u8 interrupt_in_endpoint; /* the interrupt endpoint handle */ + unsigned char *interrupt_in_buffer; /* the buffer we use for the interrupt endpoint */ + struct urb *interrupt_read_urb; /* our interrupt urb */ + + __u8 bulk_in_endpoint; /* the bulk in endpoint handle */ + unsigned char *bulk_in_buffer; /* the buffer we use for the bulk in endpoint */ + struct urb *read_urb; /* our bulk read urb */ + bool read_in_progress; + spinlock_t es_lock; + + __u8 bulk_out_endpoint; /* the bulk out endpoint handle */ + + __s16 rxBytesAvail; /* the number of bytes that we need to read from this device */ + + enum RXSTATE rxState; /* the current state of the bulk receive processor */ + __u8 rxHeader1; /* receive header byte 1 */ + __u8 rxHeader2; /* receive header byte 2 */ + __u8 rxHeader3; /* receive header byte 3 */ + __u8 rxPort; /* the port that we are currently receiving data for */ + __u8 rxStatusCode; /* the receive status code */ + __u8 rxStatusParam; /* the receive status paramater */ + __s16 rxBytesRemaining; /* the number of port bytes left to read */ + struct usb_serial *serial; /* loop back to the owner of this object */ +}; + +/* baud rate information */ +struct divisor_table_entry { + __u32 BaudRate; + __u16 Divisor; +}; + +/* + * Define table of divisors for Rev A EdgePort/4 hardware + * These assume a 3.6864MHz crystal, the standard /16, and + * MCR.7 = 0. + */ + +static const struct divisor_table_entry divisor_table[] = { + { 50, 4608}, + { 75, 3072}, + { 110, 2095}, /* 2094.545455 => 230450 => .0217 % over */ + { 134, 1713}, /* 1713.011152 => 230398.5 => .00065% under */ + { 150, 1536}, + { 300, 768}, + { 600, 384}, + { 1200, 192}, + { 1800, 128}, + { 2400, 96}, + { 4800, 48}, + { 7200, 32}, + { 9600, 24}, + { 14400, 16}, + { 19200, 12}, + { 38400, 6}, + { 57600, 4}, + { 115200, 2}, + { 230400, 1}, +}; + +/* Number of outstanding Command Write Urbs */ +static atomic_t CmdUrbs = ATOMIC_INIT(0); + + +/* local function prototypes */ + +/* function prototypes for all URB callbacks */ +static void edge_interrupt_callback(struct urb *urb); +static void edge_bulk_in_callback(struct urb *urb); +static void edge_bulk_out_data_callback(struct urb *urb); +static void edge_bulk_out_cmd_callback(struct urb *urb); + +/* function prototypes for the usbserial callbacks */ +static int edge_open(struct tty_struct *tty, struct usb_serial_port *port); +static void edge_close(struct usb_serial_port *port); +static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); +static int edge_write_room(struct tty_struct *tty); +static int edge_chars_in_buffer(struct tty_struct *tty); +static void edge_throttle(struct tty_struct *tty); +static void edge_unthrottle(struct tty_struct *tty); +static void edge_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old_termios); +static int edge_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg); +static void edge_break(struct tty_struct *tty, int break_state); +static int edge_tiocmget(struct tty_struct *tty); +static int edge_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +static int edge_startup(struct usb_serial *serial); +static void edge_disconnect(struct usb_serial *serial); +static void edge_release(struct usb_serial *serial); +static int edge_port_probe(struct usb_serial_port *port); +static int edge_port_remove(struct usb_serial_port *port); + +#include "io_tables.h" /* all of the devices that this driver supports */ + +/* function prototypes for all of our local functions */ + +static void process_rcvd_data(struct edgeport_serial *edge_serial, + unsigned char *buffer, __u16 bufferLength); +static void process_rcvd_status(struct edgeport_serial *edge_serial, + __u8 byte2, __u8 byte3); +static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data, + int length); +static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr); +static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, + __u8 lsr, __u8 data); +static int send_iosp_ext_cmd(struct edgeport_port *edge_port, __u8 command, + __u8 param); +static int calc_baud_rate_divisor(struct device *dev, int baud_rate, int *divisor); +static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, + int baudRate); +static void change_port_settings(struct tty_struct *tty, + struct edgeport_port *edge_port, + struct ktermios *old_termios); +static int send_cmd_write_uart_register(struct edgeport_port *edge_port, + __u8 regNum, __u8 regValue); +static int write_cmd_usb(struct edgeport_port *edge_port, + unsigned char *buffer, int writeLength); +static void send_more_port_data(struct edgeport_serial *edge_serial, + struct edgeport_port *edge_port); + +static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, + __u16 length, const __u8 *data); +static int rom_read(struct usb_serial *serial, __u16 extAddr, __u16 addr, + __u16 length, __u8 *data); +static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, + __u16 length, const __u8 *data); +static void get_manufacturing_desc(struct edgeport_serial *edge_serial); +static void get_boot_desc(struct edgeport_serial *edge_serial); +static void load_application_firmware(struct edgeport_serial *edge_serial); + +static void unicode_to_ascii(char *string, int buflen, + __le16 *unicode, int unicode_size); + + +/* ************************************************************************ */ +/* ************************************************************************ */ +/* ************************************************************************ */ +/* ************************************************************************ */ + +/************************************************************************ + * * + * update_edgeport_E2PROM() Compare current versions of * + * Boot ROM and Manufacture * + * Descriptors with versions * + * embedded in this driver * + * * + ************************************************************************/ +static void update_edgeport_E2PROM(struct edgeport_serial *edge_serial) +{ + struct device *dev = &edge_serial->serial->dev->dev; + __u32 BootCurVer; + __u32 BootNewVer; + __u8 BootMajorVersion; + __u8 BootMinorVersion; + __u16 BootBuildNumber; + __u32 Bootaddr; + const struct ihex_binrec *rec; + const struct firmware *fw; + const char *fw_name; + int response; + + switch (edge_serial->product_info.iDownloadFile) { + case EDGE_DOWNLOAD_FILE_I930: + fw_name = "edgeport/boot.fw"; + break; + case EDGE_DOWNLOAD_FILE_80251: + fw_name = "edgeport/boot2.fw"; + break; + default: + return; + } + + response = request_ihex_firmware(&fw, fw_name, + &edge_serial->serial->dev->dev); + if (response) { + dev_err(dev, "Failed to load image \"%s\" err %d\n", + fw_name, response); + return; + } + + rec = (const struct ihex_binrec *)fw->data; + BootMajorVersion = rec->data[0]; + BootMinorVersion = rec->data[1]; + BootBuildNumber = (rec->data[2] << 8) | rec->data[3]; + + /* Check Boot Image Version */ + BootCurVer = (edge_serial->boot_descriptor.MajorVersion << 24) + + (edge_serial->boot_descriptor.MinorVersion << 16) + + le16_to_cpu(edge_serial->boot_descriptor.BuildNumber); + + BootNewVer = (BootMajorVersion << 24) + + (BootMinorVersion << 16) + + BootBuildNumber; + + dev_dbg(dev, "Current Boot Image version %d.%d.%d\n", + edge_serial->boot_descriptor.MajorVersion, + edge_serial->boot_descriptor.MinorVersion, + le16_to_cpu(edge_serial->boot_descriptor.BuildNumber)); + + + if (BootNewVer > BootCurVer) { + dev_dbg(dev, "**Update Boot Image from %d.%d.%d to %d.%d.%d\n", + edge_serial->boot_descriptor.MajorVersion, + edge_serial->boot_descriptor.MinorVersion, + le16_to_cpu(edge_serial->boot_descriptor.BuildNumber), + BootMajorVersion, BootMinorVersion, BootBuildNumber); + + dev_dbg(dev, "Downloading new Boot Image\n"); + + for (rec = ihex_next_binrec(rec); rec; + rec = ihex_next_binrec(rec)) { + Bootaddr = be32_to_cpu(rec->addr); + response = rom_write(edge_serial->serial, + Bootaddr >> 16, + Bootaddr & 0xFFFF, + be16_to_cpu(rec->len), + &rec->data[0]); + if (response < 0) { + dev_err(&edge_serial->serial->dev->dev, + "rom_write failed (%x, %x, %d)\n", + Bootaddr >> 16, Bootaddr & 0xFFFF, + be16_to_cpu(rec->len)); + break; + } + } + } else { + dev_dbg(dev, "Boot Image -- already up to date\n"); + } + release_firmware(fw); +} + +#if 0 +/************************************************************************ + * + * Get string descriptor from device + * + ************************************************************************/ +static int get_string_desc(struct usb_device *dev, int Id, + struct usb_string_descriptor **pRetDesc) +{ + struct usb_string_descriptor StringDesc; + struct usb_string_descriptor *pStringDesc; + + dev_dbg(&dev->dev, "%s - USB String ID = %d\n", __func__, Id); + + if (!usb_get_descriptor(dev, USB_DT_STRING, Id, &StringDesc, + sizeof(StringDesc))) + return 0; + + pStringDesc = kmalloc(StringDesc.bLength, GFP_KERNEL); + if (!pStringDesc) + return -1; + + if (!usb_get_descriptor(dev, USB_DT_STRING, Id, pStringDesc, + StringDesc.bLength)) { + kfree(pStringDesc); + return -1; + } + + *pRetDesc = pStringDesc; + return 0; +} +#endif + +static void dump_product_info(struct edgeport_serial *edge_serial, + struct edgeport_product_info *product_info) +{ + struct device *dev = &edge_serial->serial->dev->dev; + + /* Dump Product Info structure */ + dev_dbg(dev, "**Product Information:\n"); + dev_dbg(dev, " ProductId %x\n", product_info->ProductId); + dev_dbg(dev, " NumPorts %d\n", product_info->NumPorts); + dev_dbg(dev, " ProdInfoVer %d\n", product_info->ProdInfoVer); + dev_dbg(dev, " IsServer %d\n", product_info->IsServer); + dev_dbg(dev, " IsRS232 %d\n", product_info->IsRS232); + dev_dbg(dev, " IsRS422 %d\n", product_info->IsRS422); + dev_dbg(dev, " IsRS485 %d\n", product_info->IsRS485); + dev_dbg(dev, " RomSize %d\n", product_info->RomSize); + dev_dbg(dev, " RamSize %d\n", product_info->RamSize); + dev_dbg(dev, " CpuRev %x\n", product_info->CpuRev); + dev_dbg(dev, " BoardRev %x\n", product_info->BoardRev); + dev_dbg(dev, " BootMajorVersion %d.%d.%d\n", + product_info->BootMajorVersion, + product_info->BootMinorVersion, + le16_to_cpu(product_info->BootBuildNumber)); + dev_dbg(dev, " FirmwareMajorVersion %d.%d.%d\n", + product_info->FirmwareMajorVersion, + product_info->FirmwareMinorVersion, + le16_to_cpu(product_info->FirmwareBuildNumber)); + dev_dbg(dev, " ManufactureDescDate %d/%d/%d\n", + product_info->ManufactureDescDate[0], + product_info->ManufactureDescDate[1], + product_info->ManufactureDescDate[2]+1900); + dev_dbg(dev, " iDownloadFile 0x%x\n", + product_info->iDownloadFile); + dev_dbg(dev, " EpicVer %d\n", product_info->EpicVer); +} + +static void get_product_info(struct edgeport_serial *edge_serial) +{ + struct edgeport_product_info *product_info = &edge_serial->product_info; + + memset(product_info, 0, sizeof(struct edgeport_product_info)); + + product_info->ProductId = (__u16)(le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) & ~ION_DEVICE_ID_80251_NETCHIP); + product_info->NumPorts = edge_serial->manuf_descriptor.NumPorts; + product_info->ProdInfoVer = 0; + + product_info->RomSize = edge_serial->manuf_descriptor.RomSize; + product_info->RamSize = edge_serial->manuf_descriptor.RamSize; + product_info->CpuRev = edge_serial->manuf_descriptor.CpuRev; + product_info->BoardRev = edge_serial->manuf_descriptor.BoardRev; + + product_info->BootMajorVersion = + edge_serial->boot_descriptor.MajorVersion; + product_info->BootMinorVersion = + edge_serial->boot_descriptor.MinorVersion; + product_info->BootBuildNumber = + edge_serial->boot_descriptor.BuildNumber; + + memcpy(product_info->ManufactureDescDate, + edge_serial->manuf_descriptor.DescDate, + sizeof(edge_serial->manuf_descriptor.DescDate)); + + /* check if this is 2nd generation hardware */ + if (le16_to_cpu(edge_serial->serial->dev->descriptor.idProduct) + & ION_DEVICE_ID_80251_NETCHIP) + product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_80251; + else + product_info->iDownloadFile = EDGE_DOWNLOAD_FILE_I930; + + /* Determine Product type and set appropriate flags */ + switch (DEVICE_ID_FROM_USB_PRODUCT_ID(product_info->ProductId)) { + case ION_DEVICE_ID_EDGEPORT_COMPATIBLE: + case ION_DEVICE_ID_EDGEPORT_4T: + case ION_DEVICE_ID_EDGEPORT_4: + case ION_DEVICE_ID_EDGEPORT_2: + case ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU: + case ION_DEVICE_ID_EDGEPORT_8: + case ION_DEVICE_ID_EDGEPORT_421: + case ION_DEVICE_ID_EDGEPORT_21: + case ION_DEVICE_ID_EDGEPORT_2_DIN: + case ION_DEVICE_ID_EDGEPORT_4_DIN: + case ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU: + product_info->IsRS232 = 1; + break; + + case ION_DEVICE_ID_EDGEPORT_2I: /* Edgeport/2 RS422/RS485 */ + product_info->IsRS422 = 1; + product_info->IsRS485 = 1; + break; + + case ION_DEVICE_ID_EDGEPORT_8I: /* Edgeport/4 RS422 */ + case ION_DEVICE_ID_EDGEPORT_4I: /* Edgeport/4 RS422 */ + product_info->IsRS422 = 1; + break; + } + + dump_product_info(edge_serial, product_info); +} + +static int get_epic_descriptor(struct edgeport_serial *ep) +{ + int result; + struct usb_serial *serial = ep->serial; + struct edgeport_product_info *product_info = &ep->product_info; + struct edge_compatibility_descriptor *epic = &ep->epic_descriptor; + struct edge_compatibility_bits *bits; + struct device *dev = &serial->dev->dev; + + ep->is_epic = 0; + result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + USB_REQUEST_ION_GET_EPIC_DESC, + 0xC0, 0x00, 0x00, + &ep->epic_descriptor, + sizeof(struct edge_compatibility_descriptor), + 300); + + if (result > 0) { + ep->is_epic = 1; + memset(product_info, 0, sizeof(struct edgeport_product_info)); + + product_info->NumPorts = epic->NumPorts; + product_info->ProdInfoVer = 0; + product_info->FirmwareMajorVersion = epic->MajorVersion; + product_info->FirmwareMinorVersion = epic->MinorVersion; + product_info->FirmwareBuildNumber = epic->BuildNumber; + product_info->iDownloadFile = epic->iDownloadFile; + product_info->EpicVer = epic->EpicVer; + product_info->Epic = epic->Supports; + product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE; + dump_product_info(ep, product_info); + + bits = &ep->epic_descriptor.Supports; + dev_dbg(dev, "**EPIC descriptor:\n"); + dev_dbg(dev, " VendEnableSuspend: %s\n", bits->VendEnableSuspend ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPOpen : %s\n", bits->IOSPOpen ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPClose : %s\n", bits->IOSPClose ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPChase : %s\n", bits->IOSPChase ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPSetRxFlow : %s\n", bits->IOSPSetRxFlow ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPSetTxFlow : %s\n", bits->IOSPSetTxFlow ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPSetXChar : %s\n", bits->IOSPSetXChar ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPRxCheck : %s\n", bits->IOSPRxCheck ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPSetClrBreak : %s\n", bits->IOSPSetClrBreak ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPWriteMCR : %s\n", bits->IOSPWriteMCR ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPWriteLCR : %s\n", bits->IOSPWriteLCR ? "TRUE": "FALSE"); + dev_dbg(dev, " IOSPSetBaudRate : %s\n", bits->IOSPSetBaudRate ? "TRUE": "FALSE"); + dev_dbg(dev, " TrueEdgeport : %s\n", bits->TrueEdgeport ? "TRUE": "FALSE"); + } + + return result; +} + + +/************************************************************************/ +/************************************************************************/ +/* U S B C A L L B A C K F U N C T I O N S */ +/* U S B C A L L B A C K F U N C T I O N S */ +/************************************************************************/ +/************************************************************************/ + +/***************************************************************************** + * edge_interrupt_callback + * this is the callback function for when we have received data on the + * interrupt endpoint. + *****************************************************************************/ +static void edge_interrupt_callback(struct urb *urb) +{ + struct edgeport_serial *edge_serial = urb->context; + struct device *dev; + struct edgeport_port *edge_port; + struct usb_serial_port *port; + unsigned char *data = urb->transfer_buffer; + int length = urb->actual_length; + int bytes_avail; + int position; + int txCredits; + int portNumber; + int result; + int status = urb->status; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); + return; + default: + dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status); + goto exit; + } + + dev = &edge_serial->serial->dev->dev; + + /* process this interrupt-read even if there are no ports open */ + if (length) { + usb_serial_debug_data(dev, __func__, length, data); + + if (length > 1) { + bytes_avail = data[0] | (data[1] << 8); + if (bytes_avail) { + spin_lock(&edge_serial->es_lock); + edge_serial->rxBytesAvail += bytes_avail; + dev_dbg(dev, + "%s - bytes_avail=%d, rxBytesAvail=%d, read_in_progress=%d\n", + __func__, bytes_avail, + edge_serial->rxBytesAvail, + edge_serial->read_in_progress); + + if (edge_serial->rxBytesAvail > 0 && + !edge_serial->read_in_progress) { + dev_dbg(dev, "%s - posting a read\n", __func__); + edge_serial->read_in_progress = true; + + /* we have pending bytes on the + bulk in pipe, send a request */ + result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC); + if (result) { + dev_err(dev, + "%s - usb_submit_urb(read bulk) failed with result = %d\n", + __func__, result); + edge_serial->read_in_progress = false; + } + } + spin_unlock(&edge_serial->es_lock); + } + } + /* grab the txcredits for the ports if available */ + position = 2; + portNumber = 0; + while ((position < length) && + (portNumber < edge_serial->serial->num_ports)) { + txCredits = data[position] | (data[position+1] << 8); + if (txCredits) { + port = edge_serial->serial->port[portNumber]; + edge_port = usb_get_serial_port_data(port); + if (edge_port->open) { + spin_lock(&edge_port->ep_lock); + edge_port->txCredits += txCredits; + spin_unlock(&edge_port->ep_lock); + dev_dbg(dev, "%s - txcredits for port%d = %d\n", + __func__, portNumber, + edge_port->txCredits); + + /* tell the tty driver that something + has changed */ + tty_port_tty_wakeup(&edge_port->port->port); + /* Since we have more credit, check + if more data can be sent */ + send_more_port_data(edge_serial, + edge_port); + } + } + position += 2; + ++portNumber; + } + } + +exit: + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) + dev_err(&urb->dev->dev, + "%s - Error %d submitting control urb\n", + __func__, result); +} + + +/***************************************************************************** + * edge_bulk_in_callback + * this is the callback function for when we have received data on the + * bulk in endpoint. + *****************************************************************************/ +static void edge_bulk_in_callback(struct urb *urb) +{ + struct edgeport_serial *edge_serial = urb->context; + struct device *dev; + unsigned char *data = urb->transfer_buffer; + int retval; + __u16 raw_data_length; + int status = urb->status; + + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n", + __func__, status); + edge_serial->read_in_progress = false; + return; + } + + if (urb->actual_length == 0) { + dev_dbg(&urb->dev->dev, "%s - read bulk callback with no data\n", __func__); + edge_serial->read_in_progress = false; + return; + } + + dev = &edge_serial->serial->dev->dev; + raw_data_length = urb->actual_length; + + usb_serial_debug_data(dev, __func__, raw_data_length, data); + + spin_lock(&edge_serial->es_lock); + + /* decrement our rxBytes available by the number that we just got */ + edge_serial->rxBytesAvail -= raw_data_length; + + dev_dbg(dev, "%s - Received = %d, rxBytesAvail %d\n", __func__, + raw_data_length, edge_serial->rxBytesAvail); + + process_rcvd_data(edge_serial, data, urb->actual_length); + + /* check to see if there's any more data for us to read */ + if (edge_serial->rxBytesAvail > 0) { + dev_dbg(dev, "%s - posting a read\n", __func__); + retval = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC); + if (retval) { + dev_err(dev, + "%s - usb_submit_urb(read bulk) failed, retval = %d\n", + __func__, retval); + edge_serial->read_in_progress = false; + } + } else { + edge_serial->read_in_progress = false; + } + + spin_unlock(&edge_serial->es_lock); +} + + +/***************************************************************************** + * edge_bulk_out_data_callback + * this is the callback function for when we have finished sending + * serial data on the bulk out endpoint. + *****************************************************************************/ +static void edge_bulk_out_data_callback(struct urb *urb) +{ + struct edgeport_port *edge_port = urb->context; + int status = urb->status; + + if (status) { + dev_dbg(&urb->dev->dev, + "%s - nonzero write bulk status received: %d\n", + __func__, status); + } + + if (edge_port->open) + tty_port_tty_wakeup(&edge_port->port->port); + + /* Release the Write URB */ + edge_port->write_in_progress = false; + + /* Check if more data needs to be sent */ + send_more_port_data((struct edgeport_serial *) + (usb_get_serial_data(edge_port->port->serial)), edge_port); +} + + +/***************************************************************************** + * BulkOutCmdCallback + * this is the callback function for when we have finished sending a + * command on the bulk out endpoint. + *****************************************************************************/ +static void edge_bulk_out_cmd_callback(struct urb *urb) +{ + struct edgeport_port *edge_port = urb->context; + int status = urb->status; + + atomic_dec(&CmdUrbs); + dev_dbg(&urb->dev->dev, "%s - FREE URB %p (outstanding %d)\n", + __func__, urb, atomic_read(&CmdUrbs)); + + + /* clean up the transfer buffer */ + kfree(urb->transfer_buffer); + + /* Free the command urb */ + usb_free_urb(urb); + + if (status) { + dev_dbg(&urb->dev->dev, + "%s - nonzero write bulk status received: %d\n", + __func__, status); + return; + } + + /* tell the tty driver that something has changed */ + if (edge_port->open) + tty_port_tty_wakeup(&edge_port->port->port); + + /* we have completed the command */ + edge_port->commandPending = false; + wake_up(&edge_port->wait_command); +} + + +/***************************************************************************** + * Driver tty interface functions + *****************************************************************************/ + +/***************************************************************************** + * SerialOpen + * this function is called by the tty driver when a port is opened + * If successful, we return 0 + * Otherwise we return a negative error number. + *****************************************************************************/ +static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + struct device *dev = &port->dev; + struct usb_serial *serial; + struct edgeport_serial *edge_serial; + int response; + + if (edge_port == NULL) + return -ENODEV; + + /* see if we've set up our endpoint info yet (can't set it up + in edge_startup as the structures were not set up at that time.) */ + serial = port->serial; + edge_serial = usb_get_serial_data(serial); + if (edge_serial == NULL) + return -ENODEV; + if (edge_serial->interrupt_in_buffer == NULL) { + struct usb_serial_port *port0 = serial->port[0]; + + /* not set up yet, so do it now */ + edge_serial->interrupt_in_buffer = + port0->interrupt_in_buffer; + edge_serial->interrupt_in_endpoint = + port0->interrupt_in_endpointAddress; + edge_serial->interrupt_read_urb = port0->interrupt_in_urb; + edge_serial->bulk_in_buffer = port0->bulk_in_buffer; + edge_serial->bulk_in_endpoint = + port0->bulk_in_endpointAddress; + edge_serial->read_urb = port0->read_urb; + edge_serial->bulk_out_endpoint = + port0->bulk_out_endpointAddress; + + /* set up our interrupt urb */ + usb_fill_int_urb(edge_serial->interrupt_read_urb, + serial->dev, + usb_rcvintpipe(serial->dev, + port0->interrupt_in_endpointAddress), + port0->interrupt_in_buffer, + edge_serial->interrupt_read_urb->transfer_buffer_length, + edge_interrupt_callback, edge_serial, + edge_serial->interrupt_read_urb->interval); + + /* set up our bulk in urb */ + usb_fill_bulk_urb(edge_serial->read_urb, serial->dev, + usb_rcvbulkpipe(serial->dev, + port0->bulk_in_endpointAddress), + port0->bulk_in_buffer, + edge_serial->read_urb->transfer_buffer_length, + edge_bulk_in_callback, edge_serial); + edge_serial->read_in_progress = false; + + /* start interrupt read for this edgeport + * this interrupt will continue as long + * as the edgeport is connected */ + response = usb_submit_urb(edge_serial->interrupt_read_urb, + GFP_KERNEL); + if (response) { + dev_err(dev, "%s - Error %d submitting control urb\n", + __func__, response); + } + } + + /* initialize our wait queues */ + init_waitqueue_head(&edge_port->wait_open); + init_waitqueue_head(&edge_port->wait_chase); + init_waitqueue_head(&edge_port->wait_command); + + /* initialize our port settings */ + edge_port->txCredits = 0; /* Can't send any data yet */ + /* Must always set this bit to enable ints! */ + edge_port->shadowMCR = MCR_MASTER_IE; + edge_port->chaseResponsePending = false; + + /* send a open port command */ + edge_port->openPending = true; + edge_port->open = false; + response = send_iosp_ext_cmd(edge_port, IOSP_CMD_OPEN_PORT, 0); + + if (response < 0) { + dev_err(dev, "%s - error sending open port command\n", __func__); + edge_port->openPending = false; + return -ENODEV; + } + + /* now wait for the port to be completely opened */ + wait_event_timeout(edge_port->wait_open, !edge_port->openPending, + OPEN_TIMEOUT); + + if (!edge_port->open) { + /* open timed out */ + dev_dbg(dev, "%s - open timedout\n", __func__); + edge_port->openPending = false; + return -ENODEV; + } + + /* create the txfifo */ + edge_port->txfifo.head = 0; + edge_port->txfifo.tail = 0; + edge_port->txfifo.count = 0; + edge_port->txfifo.size = edge_port->maxTxCredits; + edge_port->txfifo.fifo = kmalloc(edge_port->maxTxCredits, GFP_KERNEL); + + if (!edge_port->txfifo.fifo) { + edge_close(port); + return -ENOMEM; + } + + /* Allocate a URB for the write */ + edge_port->write_urb = usb_alloc_urb(0, GFP_KERNEL); + edge_port->write_in_progress = false; + + if (!edge_port->write_urb) { + edge_close(port); + return -ENOMEM; + } + + dev_dbg(dev, "%s - Initialize TX fifo to %d bytes\n", + __func__, edge_port->maxTxCredits); + + return 0; +} + + +/************************************************************************ + * + * block_until_chase_response + * + * This function will block the close until one of the following: + * 1. Response to our Chase comes from Edgeport + * 2. A timeout of 10 seconds without activity has expired + * (1K of Edgeport data @ 2400 baud ==> 4 sec to empty) + * + ************************************************************************/ +static void block_until_chase_response(struct edgeport_port *edge_port) +{ + struct device *dev = &edge_port->port->dev; + DEFINE_WAIT(wait); + __u16 lastCredits; + int timeout = 1*HZ; + int loop = 10; + + while (1) { + /* Save Last credits */ + lastCredits = edge_port->txCredits; + + /* Did we get our Chase response */ + if (!edge_port->chaseResponsePending) { + dev_dbg(dev, "%s - Got Chase Response\n", __func__); + + /* did we get all of our credit back? */ + if (edge_port->txCredits == edge_port->maxTxCredits) { + dev_dbg(dev, "%s - Got all credits\n", __func__); + return; + } + } + + /* Block the thread for a while */ + prepare_to_wait(&edge_port->wait_chase, &wait, + TASK_UNINTERRUPTIBLE); + schedule_timeout(timeout); + finish_wait(&edge_port->wait_chase, &wait); + + if (lastCredits == edge_port->txCredits) { + /* No activity.. count down. */ + loop--; + if (loop == 0) { + edge_port->chaseResponsePending = false; + dev_dbg(dev, "%s - Chase TIMEOUT\n", __func__); + return; + } + } else { + /* Reset timeout value back to 10 seconds */ + dev_dbg(dev, "%s - Last %d, Current %d\n", __func__, + lastCredits, edge_port->txCredits); + loop = 10; + } + } +} + + +/************************************************************************ + * + * block_until_tx_empty + * + * This function will block the close until one of the following: + * 1. TX count are 0 + * 2. The edgeport has stopped + * 3. A timeout of 3 seconds without activity has expired + * + ************************************************************************/ +static void block_until_tx_empty(struct edgeport_port *edge_port) +{ + struct device *dev = &edge_port->port->dev; + DEFINE_WAIT(wait); + struct TxFifo *fifo = &edge_port->txfifo; + __u32 lastCount; + int timeout = HZ/10; + int loop = 30; + + while (1) { + /* Save Last count */ + lastCount = fifo->count; + + /* Is the Edgeport Buffer empty? */ + if (lastCount == 0) { + dev_dbg(dev, "%s - TX Buffer Empty\n", __func__); + return; + } + + /* Block the thread for a while */ + prepare_to_wait(&edge_port->wait_chase, &wait, + TASK_UNINTERRUPTIBLE); + schedule_timeout(timeout); + finish_wait(&edge_port->wait_chase, &wait); + + dev_dbg(dev, "%s wait\n", __func__); + + if (lastCount == fifo->count) { + /* No activity.. count down. */ + loop--; + if (loop == 0) { + dev_dbg(dev, "%s - TIMEOUT\n", __func__); + return; + } + } else { + /* Reset timeout value back to seconds */ + loop = 30; + } + } +} + + +/***************************************************************************** + * edge_close + * this function is called by the tty driver when a port is closed + *****************************************************************************/ +static void edge_close(struct usb_serial_port *port) +{ + struct edgeport_serial *edge_serial; + struct edgeport_port *edge_port; + int status; + + edge_serial = usb_get_serial_data(port->serial); + edge_port = usb_get_serial_port_data(port); + if (edge_serial == NULL || edge_port == NULL) + return; + + /* block until tx is empty */ + block_until_tx_empty(edge_port); + + edge_port->closePending = true; + + if ((!edge_serial->is_epic) || + ((edge_serial->is_epic) && + (edge_serial->epic_descriptor.Supports.IOSPChase))) { + /* flush and chase */ + edge_port->chaseResponsePending = true; + + dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CHASE_PORT\n", __func__); + status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0); + if (status == 0) + /* block until chase finished */ + block_until_chase_response(edge_port); + else + edge_port->chaseResponsePending = false; + } + + if ((!edge_serial->is_epic) || + ((edge_serial->is_epic) && + (edge_serial->epic_descriptor.Supports.IOSPClose))) { + /* close the port */ + dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLOSE_PORT\n", __func__); + send_iosp_ext_cmd(edge_port, IOSP_CMD_CLOSE_PORT, 0); + } + + /* port->close = true; */ + edge_port->closePending = false; + edge_port->open = false; + edge_port->openPending = false; + + usb_kill_urb(edge_port->write_urb); + + if (edge_port->write_urb) { + /* if this urb had a transfer buffer already + (old transfer) free it */ + kfree(edge_port->write_urb->transfer_buffer); + usb_free_urb(edge_port->write_urb); + edge_port->write_urb = NULL; + } + kfree(edge_port->txfifo.fifo); + edge_port->txfifo.fifo = NULL; +} + +/***************************************************************************** + * SerialWrite + * this function is called by the tty driver when data should be written + * to the port. + * If successful, we return the number of bytes written, otherwise we + * return a negative error number. + *****************************************************************************/ +static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *data, int count) +{ + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + struct TxFifo *fifo; + int copySize; + int bytesleft; + int firsthalf; + int secondhalf; + unsigned long flags; + + if (edge_port == NULL) + return -ENODEV; + + /* get a pointer to the Tx fifo */ + fifo = &edge_port->txfifo; + + spin_lock_irqsave(&edge_port->ep_lock, flags); + + /* calculate number of bytes to put in fifo */ + copySize = min((unsigned int)count, + (edge_port->txCredits - fifo->count)); + + dev_dbg(&port->dev, "%s of %d byte(s) Fifo room %d -- will copy %d bytes\n", + __func__, count, edge_port->txCredits - fifo->count, copySize); + + /* catch writes of 0 bytes which the tty driver likes to give us, + and when txCredits is empty */ + if (copySize == 0) { + dev_dbg(&port->dev, "%s - copySize = Zero\n", __func__); + goto finish_write; + } + + /* queue the data + * since we can never overflow the buffer we do not have to check for a + * full condition + * + * the copy is done is two parts -- first fill to the end of the buffer + * then copy the reset from the start of the buffer + */ + bytesleft = fifo->size - fifo->head; + firsthalf = min(bytesleft, copySize); + dev_dbg(&port->dev, "%s - copy %d bytes of %d into fifo \n", __func__, + firsthalf, bytesleft); + + /* now copy our data */ + memcpy(&fifo->fifo[fifo->head], data, firsthalf); + usb_serial_debug_data(&port->dev, __func__, firsthalf, &fifo->fifo[fifo->head]); + + /* update the index and size */ + fifo->head += firsthalf; + fifo->count += firsthalf; + + /* wrap the index */ + if (fifo->head == fifo->size) + fifo->head = 0; + + secondhalf = copySize-firsthalf; + + if (secondhalf) { + dev_dbg(&port->dev, "%s - copy rest of data %d\n", __func__, secondhalf); + memcpy(&fifo->fifo[fifo->head], &data[firsthalf], secondhalf); + usb_serial_debug_data(&port->dev, __func__, secondhalf, &fifo->fifo[fifo->head]); + /* update the index and size */ + fifo->count += secondhalf; + fifo->head += secondhalf; + /* No need to check for wrap since we can not get to end of + * the fifo in this part + */ + } + +finish_write: + spin_unlock_irqrestore(&edge_port->ep_lock, flags); + + send_more_port_data((struct edgeport_serial *) + usb_get_serial_data(port->serial), edge_port); + + dev_dbg(&port->dev, "%s wrote %d byte(s) TxCredits %d, Fifo %d\n", + __func__, copySize, edge_port->txCredits, fifo->count); + + return copySize; +} + + +/************************************************************************ + * + * send_more_port_data() + * + * This routine attempts to write additional UART transmit data + * to a port over the USB bulk pipe. It is called (1) when new + * data has been written to a port's TxBuffer from higher layers + * (2) when the peripheral sends us additional TxCredits indicating + * that it can accept more Tx data for a given port; and (3) when + * a bulk write completes successfully and we want to see if we + * can transmit more. + * + ************************************************************************/ +static void send_more_port_data(struct edgeport_serial *edge_serial, + struct edgeport_port *edge_port) +{ + struct TxFifo *fifo = &edge_port->txfifo; + struct device *dev = &edge_port->port->dev; + struct urb *urb; + unsigned char *buffer; + int status; + int count; + int bytesleft; + int firsthalf; + int secondhalf; + unsigned long flags; + + spin_lock_irqsave(&edge_port->ep_lock, flags); + + if (edge_port->write_in_progress || + !edge_port->open || + (fifo->count == 0)) { + dev_dbg(dev, "%s EXIT - fifo %d, PendingWrite = %d\n", + __func__, fifo->count, edge_port->write_in_progress); + goto exit_send; + } + + /* since the amount of data in the fifo will always fit into the + * edgeport buffer we do not need to check the write length + * + * Do we have enough credits for this port to make it worthwhile + * to bother queueing a write. If it's too small, say a few bytes, + * it's better to wait for more credits so we can do a larger write. + */ + if (edge_port->txCredits < EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(edge_port->maxTxCredits, EDGE_FW_BULK_MAX_PACKET_SIZE)) { + dev_dbg(dev, "%s Not enough credit - fifo %d TxCredit %d\n", + __func__, fifo->count, edge_port->txCredits); + goto exit_send; + } + + /* lock this write */ + edge_port->write_in_progress = true; + + /* get a pointer to the write_urb */ + urb = edge_port->write_urb; + + /* make sure transfer buffer is freed */ + kfree(urb->transfer_buffer); + urb->transfer_buffer = NULL; + + /* build the data header for the buffer and port that we are about + to send out */ + count = fifo->count; + buffer = kmalloc(count+2, GFP_ATOMIC); + if (!buffer) { + edge_port->write_in_progress = false; + goto exit_send; + } + buffer[0] = IOSP_BUILD_DATA_HDR1(edge_port->port->port_number, count); + buffer[1] = IOSP_BUILD_DATA_HDR2(edge_port->port->port_number, count); + + /* now copy our data */ + bytesleft = fifo->size - fifo->tail; + firsthalf = min(bytesleft, count); + memcpy(&buffer[2], &fifo->fifo[fifo->tail], firsthalf); + fifo->tail += firsthalf; + fifo->count -= firsthalf; + if (fifo->tail == fifo->size) + fifo->tail = 0; + + secondhalf = count-firsthalf; + if (secondhalf) { + memcpy(&buffer[2+firsthalf], &fifo->fifo[fifo->tail], + secondhalf); + fifo->tail += secondhalf; + fifo->count -= secondhalf; + } + + if (count) + usb_serial_debug_data(&edge_port->port->dev, __func__, count, &buffer[2]); + + /* fill up the urb with all of our data and submit it */ + usb_fill_bulk_urb(urb, edge_serial->serial->dev, + usb_sndbulkpipe(edge_serial->serial->dev, + edge_serial->bulk_out_endpoint), + buffer, count+2, + edge_bulk_out_data_callback, edge_port); + + /* decrement the number of credits we have by the number we just sent */ + edge_port->txCredits -= count; + edge_port->port->icount.tx += count; + + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status) { + /* something went wrong */ + dev_err_console(edge_port->port, + "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n", + __func__, status); + edge_port->write_in_progress = false; + + /* revert the credits as something bad happened. */ + edge_port->txCredits += count; + edge_port->port->icount.tx -= count; + } + dev_dbg(dev, "%s wrote %d byte(s) TxCredit %d, Fifo %d\n", + __func__, count, edge_port->txCredits, fifo->count); + +exit_send: + spin_unlock_irqrestore(&edge_port->ep_lock, flags); +} + + +/***************************************************************************** + * edge_write_room + * this function is called by the tty driver when it wants to know how + * many bytes of data we can accept for a specific port. If successful, + * we return the amount of room that we have for this port (the txCredits) + * otherwise we return a negative error number. + *****************************************************************************/ +static int edge_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + int room; + unsigned long flags; + + if (edge_port == NULL) + return 0; + if (edge_port->closePending) + return 0; + + if (!edge_port->open) { + dev_dbg(&port->dev, "%s - port not opened\n", __func__); + return 0; + } + + /* total of both buffers is still txCredit */ + spin_lock_irqsave(&edge_port->ep_lock, flags); + room = edge_port->txCredits - edge_port->txfifo.count; + spin_unlock_irqrestore(&edge_port->ep_lock, flags); + + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); + return room; +} + + +/***************************************************************************** + * edge_chars_in_buffer + * this function is called by the tty driver when it wants to know how + * many bytes of data we currently have outstanding in the port (data that + * has been written, but hasn't made it out the port yet) + * If successful, we return the number of bytes left to be written in the + * system, + * Otherwise we return a negative error number. + *****************************************************************************/ +static int edge_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + int num_chars; + unsigned long flags; + + if (edge_port == NULL) + return 0; + if (edge_port->closePending) + return 0; + + if (!edge_port->open) { + dev_dbg(&port->dev, "%s - port not opened\n", __func__); + return 0; + } + + spin_lock_irqsave(&edge_port->ep_lock, flags); + num_chars = edge_port->maxTxCredits - edge_port->txCredits + + edge_port->txfifo.count; + spin_unlock_irqrestore(&edge_port->ep_lock, flags); + if (num_chars) { + dev_dbg(&port->dev, "%s - returns %d\n", __func__, num_chars); + } + + return num_chars; +} + + +/***************************************************************************** + * SerialThrottle + * this function is called by the tty driver when it wants to stop the data + * being read from the port. + *****************************************************************************/ +static void edge_throttle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + int status; + + if (edge_port == NULL) + return; + + if (!edge_port->open) { + dev_dbg(&port->dev, "%s - port not opened\n", __func__); + return; + } + + /* if we are implementing XON/XOFF, send the stop character */ + if (I_IXOFF(tty)) { + unsigned char stop_char = STOP_CHAR(tty); + status = edge_write(tty, port, &stop_char, 1); + if (status <= 0) + return; + } + + /* if we are implementing RTS/CTS, toggle that line */ + if (tty->termios.c_cflag & CRTSCTS) { + edge_port->shadowMCR &= ~MCR_RTS; + status = send_cmd_write_uart_register(edge_port, MCR, + edge_port->shadowMCR); + if (status != 0) + return; + } +} + + +/***************************************************************************** + * edge_unthrottle + * this function is called by the tty driver when it wants to resume the + * data being read from the port (called after SerialThrottle is called) + *****************************************************************************/ +static void edge_unthrottle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + int status; + + if (edge_port == NULL) + return; + + if (!edge_port->open) { + dev_dbg(&port->dev, "%s - port not opened\n", __func__); + return; + } + + /* if we are implementing XON/XOFF, send the start character */ + if (I_IXOFF(tty)) { + unsigned char start_char = START_CHAR(tty); + status = edge_write(tty, port, &start_char, 1); + if (status <= 0) + return; + } + /* if we are implementing RTS/CTS, toggle that line */ + if (tty->termios.c_cflag & CRTSCTS) { + edge_port->shadowMCR |= MCR_RTS; + send_cmd_write_uart_register(edge_port, MCR, + edge_port->shadowMCR); + } +} + + +/***************************************************************************** + * SerialSetTermios + * this function is called by the tty driver when it wants to change + * the termios structure + *****************************************************************************/ +static void edge_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + unsigned int cflag; + + cflag = tty->termios.c_cflag; + dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, tty->termios.c_cflag, tty->termios.c_iflag); + dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, old_termios->c_cflag, old_termios->c_iflag); + + if (edge_port == NULL) + return; + + if (!edge_port->open) { + dev_dbg(&port->dev, "%s - port not opened\n", __func__); + return; + } + + /* change the port settings to the new ones specified */ + change_port_settings(tty, edge_port, old_termios); +} + + +/***************************************************************************** + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + *****************************************************************************/ +static int get_lsr_info(struct edgeport_port *edge_port, + unsigned int __user *value) +{ + unsigned int result = 0; + unsigned long flags; + + spin_lock_irqsave(&edge_port->ep_lock, flags); + if (edge_port->maxTxCredits == edge_port->txCredits && + edge_port->txfifo.count == 0) { + dev_dbg(&edge_port->port->dev, "%s -- Empty\n", __func__); + result = TIOCSER_TEMT; + } + spin_unlock_irqrestore(&edge_port->ep_lock, flags); + + if (copy_to_user(value, &result, sizeof(int))) + return -EFAULT; + return 0; +} + +static int edge_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + unsigned int mcr; + + mcr = edge_port->shadowMCR; + if (set & TIOCM_RTS) + mcr |= MCR_RTS; + if (set & TIOCM_DTR) + mcr |= MCR_DTR; + if (set & TIOCM_LOOP) + mcr |= MCR_LOOPBACK; + + if (clear & TIOCM_RTS) + mcr &= ~MCR_RTS; + if (clear & TIOCM_DTR) + mcr &= ~MCR_DTR; + if (clear & TIOCM_LOOP) + mcr &= ~MCR_LOOPBACK; + + edge_port->shadowMCR = mcr; + + send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR); + + return 0; +} + +static int edge_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + unsigned int result = 0; + unsigned int msr; + unsigned int mcr; + + msr = edge_port->shadowMSR; + mcr = edge_port->shadowMCR; + result = ((mcr & MCR_DTR) ? TIOCM_DTR: 0) /* 0x002 */ + | ((mcr & MCR_RTS) ? TIOCM_RTS: 0) /* 0x004 */ + | ((msr & EDGEPORT_MSR_CTS) ? TIOCM_CTS: 0) /* 0x020 */ + | ((msr & EDGEPORT_MSR_CD) ? TIOCM_CAR: 0) /* 0x040 */ + | ((msr & EDGEPORT_MSR_RI) ? TIOCM_RI: 0) /* 0x080 */ + | ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */ + + return result; +} + +static int get_serial_info(struct edgeport_port *edge_port, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp; + + if (!retinfo) + return -EFAULT; + + memset(&tmp, 0, sizeof(tmp)); + + tmp.type = PORT_16550A; + tmp.line = edge_port->port->minor; + tmp.port = edge_port->port->port_number; + tmp.irq = 0; + tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; + tmp.xmit_fifo_size = edge_port->maxTxCredits; + tmp.baud_base = 9600; + tmp.close_delay = 5*HZ; + tmp.closing_wait = 30*HZ; + + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + + +/***************************************************************************** + * SerialIoctl + * this function handles any ioctl calls to the driver + *****************************************************************************/ +static int edge_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + DEFINE_WAIT(wait); + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + + switch (cmd) { + case TIOCSERGETLSR: + dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__); + return get_lsr_info(edge_port, (unsigned int __user *) arg); + + case TIOCGSERIAL: + dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__); + return get_serial_info(edge_port, (struct serial_struct __user *) arg); + } + return -ENOIOCTLCMD; +} + + +/***************************************************************************** + * SerialBreak + * this function sends a break to the port + *****************************************************************************/ +static void edge_break(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + struct edgeport_serial *edge_serial = usb_get_serial_data(port->serial); + int status; + + if ((!edge_serial->is_epic) || + ((edge_serial->is_epic) && + (edge_serial->epic_descriptor.Supports.IOSPChase))) { + /* flush and chase */ + edge_port->chaseResponsePending = true; + + dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CHASE_PORT\n", __func__); + status = send_iosp_ext_cmd(edge_port, IOSP_CMD_CHASE_PORT, 0); + if (status == 0) { + /* block until chase finished */ + block_until_chase_response(edge_port); + } else { + edge_port->chaseResponsePending = false; + } + } + + if ((!edge_serial->is_epic) || + ((edge_serial->is_epic) && + (edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) { + if (break_state == -1) { + dev_dbg(&port->dev, "%s - Sending IOSP_CMD_SET_BREAK\n", __func__); + status = send_iosp_ext_cmd(edge_port, + IOSP_CMD_SET_BREAK, 0); + } else { + dev_dbg(&port->dev, "%s - Sending IOSP_CMD_CLEAR_BREAK\n", __func__); + status = send_iosp_ext_cmd(edge_port, + IOSP_CMD_CLEAR_BREAK, 0); + } + if (status) + dev_dbg(&port->dev, "%s - error sending break set/clear command.\n", + __func__); + } +} + + +/***************************************************************************** + * process_rcvd_data + * this function handles the data received on the bulk in pipe. + *****************************************************************************/ +static void process_rcvd_data(struct edgeport_serial *edge_serial, + unsigned char *buffer, __u16 bufferLength) +{ + struct device *dev = &edge_serial->serial->dev->dev; + struct usb_serial_port *port; + struct edgeport_port *edge_port; + __u16 lastBufferLength; + __u16 rxLen; + + lastBufferLength = bufferLength + 1; + + while (bufferLength > 0) { + /* failsafe incase we get a message that we don't understand */ + if (lastBufferLength == bufferLength) { + dev_dbg(dev, "%s - stuck in loop, exiting it.\n", __func__); + break; + } + lastBufferLength = bufferLength; + + switch (edge_serial->rxState) { + case EXPECT_HDR1: + edge_serial->rxHeader1 = *buffer; + ++buffer; + --bufferLength; + + if (bufferLength == 0) { + edge_serial->rxState = EXPECT_HDR2; + break; + } + /* otherwise, drop on through */ + case EXPECT_HDR2: + edge_serial->rxHeader2 = *buffer; + ++buffer; + --bufferLength; + + dev_dbg(dev, "%s - Hdr1=%02X Hdr2=%02X\n", __func__, + edge_serial->rxHeader1, edge_serial->rxHeader2); + /* Process depending on whether this header is + * data or status */ + + if (IS_CMD_STAT_HDR(edge_serial->rxHeader1)) { + /* Decode this status header and go to + * EXPECT_HDR1 (if we can process the status + * with only 2 bytes), or go to EXPECT_HDR3 to + * get the third byte. */ + edge_serial->rxPort = + IOSP_GET_HDR_PORT(edge_serial->rxHeader1); + edge_serial->rxStatusCode = + IOSP_GET_STATUS_CODE( + edge_serial->rxHeader1); + + if (!IOSP_STATUS_IS_2BYTE( + edge_serial->rxStatusCode)) { + /* This status needs additional bytes. + * Save what we have and then wait for + * more data. + */ + edge_serial->rxStatusParam + = edge_serial->rxHeader2; + edge_serial->rxState = EXPECT_HDR3; + break; + } + /* We have all the header bytes, process the + status now */ + process_rcvd_status(edge_serial, + edge_serial->rxHeader2, 0); + edge_serial->rxState = EXPECT_HDR1; + break; + } else { + edge_serial->rxPort = + IOSP_GET_HDR_PORT(edge_serial->rxHeader1); + edge_serial->rxBytesRemaining = + IOSP_GET_HDR_DATA_LEN( + edge_serial->rxHeader1, + edge_serial->rxHeader2); + dev_dbg(dev, "%s - Data for Port %u Len %u\n", + __func__, + edge_serial->rxPort, + edge_serial->rxBytesRemaining); + + /* ASSERT(DevExt->RxPort < DevExt->NumPorts); + * ASSERT(DevExt->RxBytesRemaining < + * IOSP_MAX_DATA_LENGTH); + */ + + if (bufferLength == 0) { + edge_serial->rxState = EXPECT_DATA; + break; + } + /* Else, drop through */ + } + case EXPECT_DATA: /* Expect data */ + if (bufferLength < edge_serial->rxBytesRemaining) { + rxLen = bufferLength; + /* Expect data to start next buffer */ + edge_serial->rxState = EXPECT_DATA; + } else { + /* BufLen >= RxBytesRemaining */ + rxLen = edge_serial->rxBytesRemaining; + /* Start another header next time */ + edge_serial->rxState = EXPECT_HDR1; + } + + bufferLength -= rxLen; + edge_serial->rxBytesRemaining -= rxLen; + + /* spit this data back into the tty driver if this + port is open */ + if (rxLen) { + port = edge_serial->serial->port[ + edge_serial->rxPort]; + edge_port = usb_get_serial_port_data(port); + if (edge_port->open) { + dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n", + __func__, rxLen, + edge_serial->rxPort); + edge_tty_recv(edge_port->port, buffer, + rxLen); + edge_port->port->icount.rx += rxLen; + } + buffer += rxLen; + } + break; + + case EXPECT_HDR3: /* Expect 3rd byte of status header */ + edge_serial->rxHeader3 = *buffer; + ++buffer; + --bufferLength; + + /* We have all the header bytes, process the + status now */ + process_rcvd_status(edge_serial, + edge_serial->rxStatusParam, + edge_serial->rxHeader3); + edge_serial->rxState = EXPECT_HDR1; + break; + } + } +} + + +/***************************************************************************** + * process_rcvd_status + * this function handles the any status messages received on the + * bulk in pipe. + *****************************************************************************/ +static void process_rcvd_status(struct edgeport_serial *edge_serial, + __u8 byte2, __u8 byte3) +{ + struct usb_serial_port *port; + struct edgeport_port *edge_port; + struct tty_struct *tty; + struct device *dev; + __u8 code = edge_serial->rxStatusCode; + + /* switch the port pointer to the one being currently talked about */ + port = edge_serial->serial->port[edge_serial->rxPort]; + edge_port = usb_get_serial_port_data(port); + if (edge_port == NULL) { + dev_err(&edge_serial->serial->dev->dev, + "%s - edge_port == NULL for port %d\n", + __func__, edge_serial->rxPort); + return; + } + dev = &port->dev; + + if (code == IOSP_EXT_STATUS) { + switch (byte2) { + case IOSP_EXT_STATUS_CHASE_RSP: + /* we want to do EXT status regardless of port + * open/closed */ + dev_dbg(dev, "%s - Port %u EXT CHASE_RSP Data = %02x\n", + __func__, edge_serial->rxPort, byte3); + /* Currently, the only EXT_STATUS is Chase, so process + * here instead of one more call to one more subroutine + * If/when more EXT_STATUS, there'll be more work to do + * Also, we currently clear flag and close the port + * regardless of content of above's Byte3. + * We could choose to do something else when Byte3 says + * Timeout on Chase from Edgeport, like wait longer in + * block_until_chase_response, but for now we don't. + */ + edge_port->chaseResponsePending = false; + wake_up(&edge_port->wait_chase); + return; + + case IOSP_EXT_STATUS_RX_CHECK_RSP: + dev_dbg(dev, "%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", + __func__, edge_serial->rxPort, byte3); + /* Port->RxCheckRsp = true; */ + return; + } + } + + if (code == IOSP_STATUS_OPEN_RSP) { + edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3); + edge_port->maxTxCredits = edge_port->txCredits; + dev_dbg(dev, "%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d\n", + __func__, edge_serial->rxPort, byte2, edge_port->txCredits); + handle_new_msr(edge_port, byte2); + + /* send the current line settings to the port so we are + in sync with any further termios calls */ + tty = tty_port_tty_get(&edge_port->port->port); + if (tty) { + change_port_settings(tty, + edge_port, &tty->termios); + tty_kref_put(tty); + } + + /* we have completed the open */ + edge_port->openPending = false; + edge_port->open = true; + wake_up(&edge_port->wait_open); + return; + } + + /* If port is closed, silently discard all rcvd status. We can + * have cases where buffered status is received AFTER the close + * port command is sent to the Edgeport. + */ + if (!edge_port->open || edge_port->closePending) + return; + + switch (code) { + /* Not currently sent by Edgeport */ + case IOSP_STATUS_LSR: + dev_dbg(dev, "%s - Port %u LSR Status = %02x\n", + __func__, edge_serial->rxPort, byte2); + handle_new_lsr(edge_port, false, byte2, 0); + break; + + case IOSP_STATUS_LSR_DATA: + dev_dbg(dev, "%s - Port %u LSR Status = %02x, Data = %02x\n", + __func__, edge_serial->rxPort, byte2, byte3); + /* byte2 is LSR Register */ + /* byte3 is broken data byte */ + handle_new_lsr(edge_port, true, byte2, byte3); + break; + /* + * case IOSP_EXT_4_STATUS: + * dev_dbg(dev, "%s - Port %u LSR Status = %02x Data = %02x\n", + * __func__, edge_serial->rxPort, byte2, byte3); + * break; + */ + case IOSP_STATUS_MSR: + dev_dbg(dev, "%s - Port %u MSR Status = %02x\n", + __func__, edge_serial->rxPort, byte2); + /* + * Process this new modem status and generate appropriate + * events, etc, based on the new status. This routine + * also saves the MSR in Port->ShadowMsr. + */ + handle_new_msr(edge_port, byte2); + break; + + default: + dev_dbg(dev, "%s - Unrecognized IOSP status code %u\n", __func__, code); + break; + } +} + + +/***************************************************************************** + * edge_tty_recv + * this function passes data on to the tty flip buffer + *****************************************************************************/ +static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data, + int length) +{ + int cnt; + + cnt = tty_insert_flip_string(&port->port, data, length); + if (cnt < length) { + dev_err(&port->dev, "%s - dropping data, %d bytes lost\n", + __func__, length - cnt); + } + data += cnt; + length -= cnt; + + tty_flip_buffer_push(&port->port); +} + + +/***************************************************************************** + * handle_new_msr + * this function handles any change to the msr register for a port. + *****************************************************************************/ +static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr) +{ + struct async_icount *icount; + + if (newMsr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | + EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { + icount = &edge_port->port->icount; + + /* update input line counters */ + if (newMsr & EDGEPORT_MSR_DELTA_CTS) + icount->cts++; + if (newMsr & EDGEPORT_MSR_DELTA_DSR) + icount->dsr++; + if (newMsr & EDGEPORT_MSR_DELTA_CD) + icount->dcd++; + if (newMsr & EDGEPORT_MSR_DELTA_RI) + icount->rng++; + wake_up_interruptible(&edge_port->port->port.delta_msr_wait); + } + + /* Save the new modem status */ + edge_port->shadowMSR = newMsr & 0xf0; +} + + +/***************************************************************************** + * handle_new_lsr + * this function handles any change to the lsr register for a port. + *****************************************************************************/ +static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, + __u8 lsr, __u8 data) +{ + __u8 newLsr = (__u8) (lsr & (__u8) + (LSR_OVER_ERR | LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK)); + struct async_icount *icount; + + edge_port->shadowLSR = lsr; + + if (newLsr & LSR_BREAK) { + /* + * Parity and Framing errors only count if they + * occur exclusive of a break being + * received. + */ + newLsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK); + } + + /* Place LSR data byte into Rx buffer */ + if (lsrData) + edge_tty_recv(edge_port->port, &data, 1); + + /* update input line counters */ + icount = &edge_port->port->icount; + if (newLsr & LSR_BREAK) + icount->brk++; + if (newLsr & LSR_OVER_ERR) + icount->overrun++; + if (newLsr & LSR_PAR_ERR) + icount->parity++; + if (newLsr & LSR_FRM_ERR) + icount->frame++; +} + + +/**************************************************************************** + * sram_write + * writes a number of bytes to the Edgeport device's sram starting at the + * given address. + * If successful returns the number of bytes written, otherwise it returns + * a negative error number of the problem. + ****************************************************************************/ +static int sram_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, + __u16 length, const __u8 *data) +{ + int result; + __u16 current_length; + unsigned char *transfer_buffer; + + dev_dbg(&serial->dev->dev, "%s - %x, %x, %d\n", __func__, extAddr, addr, length); + + transfer_buffer = kmalloc(64, GFP_KERNEL); + if (!transfer_buffer) + return -ENOMEM; + + /* need to split these writes up into 64 byte chunks */ + result = 0; + while (length > 0) { + if (length > 64) + current_length = 64; + else + current_length = length; + +/* dev_dbg(&serial->dev->dev, "%s - writing %x, %x, %d\n", __func__, extAddr, addr, current_length); */ + memcpy(transfer_buffer, data, current_length); + result = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), + USB_REQUEST_ION_WRITE_RAM, + 0x40, addr, extAddr, transfer_buffer, + current_length, 300); + if (result < 0) + break; + length -= current_length; + addr += current_length; + data += current_length; + } + + kfree(transfer_buffer); + return result; +} + + +/**************************************************************************** + * rom_write + * writes a number of bytes to the Edgeport device's ROM starting at the + * given address. + * If successful returns the number of bytes written, otherwise it returns + * a negative error number of the problem. + ****************************************************************************/ +static int rom_write(struct usb_serial *serial, __u16 extAddr, __u16 addr, + __u16 length, const __u8 *data) +{ + int result; + __u16 current_length; + unsigned char *transfer_buffer; + + transfer_buffer = kmalloc(64, GFP_KERNEL); + if (!transfer_buffer) + return -ENOMEM; + + /* need to split these writes up into 64 byte chunks */ + result = 0; + while (length > 0) { + if (length > 64) + current_length = 64; + else + current_length = length; + memcpy(transfer_buffer, data, current_length); + result = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), + USB_REQUEST_ION_WRITE_ROM, 0x40, + addr, extAddr, + transfer_buffer, current_length, 300); + if (result < 0) + break; + length -= current_length; + addr += current_length; + data += current_length; + } + + kfree(transfer_buffer); + return result; +} + + +/**************************************************************************** + * rom_read + * reads a number of bytes from the Edgeport device starting at the given + * address. + * If successful returns the number of bytes read, otherwise it returns + * a negative error number of the problem. + ****************************************************************************/ +static int rom_read(struct usb_serial *serial, __u16 extAddr, + __u16 addr, __u16 length, __u8 *data) +{ + int result; + __u16 current_length; + unsigned char *transfer_buffer; + + transfer_buffer = kmalloc(64, GFP_KERNEL); + if (!transfer_buffer) + return -ENOMEM; + + /* need to split these reads up into 64 byte chunks */ + result = 0; + while (length > 0) { + if (length > 64) + current_length = 64; + else + current_length = length; + result = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + USB_REQUEST_ION_READ_ROM, + 0xC0, addr, extAddr, transfer_buffer, + current_length, 300); + if (result < 0) + break; + memcpy(data, transfer_buffer, current_length); + length -= current_length; + addr += current_length; + data += current_length; + } + + kfree(transfer_buffer); + return result; +} + + +/**************************************************************************** + * send_iosp_ext_cmd + * Is used to send a IOSP message to the Edgeport device + ****************************************************************************/ +static int send_iosp_ext_cmd(struct edgeport_port *edge_port, + __u8 command, __u8 param) +{ + unsigned char *buffer; + unsigned char *currentCommand; + int length = 0; + int status = 0; + + buffer = kmalloc(10, GFP_ATOMIC); + if (!buffer) + return -ENOMEM; + + currentCommand = buffer; + + MAKE_CMD_EXT_CMD(¤tCommand, &length, edge_port->port->port_number, + command, param); + + status = write_cmd_usb(edge_port, buffer, length); + if (status) { + /* something bad happened, let's free up the memory */ + kfree(buffer); + } + + return status; +} + + +/***************************************************************************** + * write_cmd_usb + * this function writes the given buffer out to the bulk write endpoint. + *****************************************************************************/ +static int write_cmd_usb(struct edgeport_port *edge_port, + unsigned char *buffer, int length) +{ + struct edgeport_serial *edge_serial = + usb_get_serial_data(edge_port->port->serial); + struct device *dev = &edge_port->port->dev; + int status = 0; + struct urb *urb; + + usb_serial_debug_data(dev, __func__, length, buffer); + + /* Allocate our next urb */ + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) + return -ENOMEM; + + atomic_inc(&CmdUrbs); + dev_dbg(dev, "%s - ALLOCATE URB %p (outstanding %d)\n", + __func__, urb, atomic_read(&CmdUrbs)); + + usb_fill_bulk_urb(urb, edge_serial->serial->dev, + usb_sndbulkpipe(edge_serial->serial->dev, + edge_serial->bulk_out_endpoint), + buffer, length, edge_bulk_out_cmd_callback, edge_port); + + edge_port->commandPending = true; + status = usb_submit_urb(urb, GFP_ATOMIC); + + if (status) { + /* something went wrong */ + dev_err(dev, "%s - usb_submit_urb(write command) failed, status = %d\n", + __func__, status); + usb_kill_urb(urb); + usb_free_urb(urb); + atomic_dec(&CmdUrbs); + return status; + } + +#if 0 + wait_event(&edge_port->wait_command, !edge_port->commandPending); + + if (edge_port->commandPending) { + /* command timed out */ + dev_dbg(dev, "%s - command timed out\n", __func__); + status = -EINVAL; + } +#endif + return status; +} + + +/***************************************************************************** + * send_cmd_write_baud_rate + * this function sends the proper command to change the baud rate of the + * specified port. + *****************************************************************************/ +static int send_cmd_write_baud_rate(struct edgeport_port *edge_port, + int baudRate) +{ + struct edgeport_serial *edge_serial = + usb_get_serial_data(edge_port->port->serial); + struct device *dev = &edge_port->port->dev; + unsigned char *cmdBuffer; + unsigned char *currCmd; + int cmdLen = 0; + int divisor; + int status; + u32 number = edge_port->port->port_number; + + if (edge_serial->is_epic && + !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) { + dev_dbg(dev, "SendCmdWriteBaudRate - NOT Setting baud rate for port, baud = %d\n", + baudRate); + return 0; + } + + dev_dbg(dev, "%s - baud = %d\n", __func__, baudRate); + + status = calc_baud_rate_divisor(dev, baudRate, &divisor); + if (status) { + dev_err(dev, "%s - bad baud rate\n", __func__); + return status; + } + + /* Alloc memory for the string of commands. */ + cmdBuffer = kmalloc(0x100, GFP_ATOMIC); + if (!cmdBuffer) + return -ENOMEM; + + currCmd = cmdBuffer; + + /* Enable access to divisor latch */ + MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR, LCR_DL_ENABLE); + + /* Write the divisor itself */ + MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLL, LOW8(divisor)); + MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, DLM, HIGH8(divisor)); + + /* Restore original value to disable access to divisor latch */ + MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, number, LCR, + edge_port->shadowLCR); + + status = write_cmd_usb(edge_port, cmdBuffer, cmdLen); + if (status) { + /* something bad happened, let's free up the memory */ + kfree(cmdBuffer); + } + + return status; +} + + +/***************************************************************************** + * calc_baud_rate_divisor + * this function calculates the proper baud rate divisor for the specified + * baud rate. + *****************************************************************************/ +static int calc_baud_rate_divisor(struct device *dev, int baudrate, int *divisor) +{ + int i; + __u16 custom; + + for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { + if (divisor_table[i].BaudRate == baudrate) { + *divisor = divisor_table[i].Divisor; + return 0; + } + } + + /* We have tried all of the standard baud rates + * lets try to calculate the divisor for this baud rate + * Make sure the baud rate is reasonable */ + if (baudrate > 50 && baudrate < 230400) { + /* get divisor */ + custom = (__u16)((230400L + baudrate/2) / baudrate); + + *divisor = custom; + + dev_dbg(dev, "%s - Baud %d = %d\n", __func__, baudrate, custom); + return 0; + } + + return -1; +} + + +/***************************************************************************** + * send_cmd_write_uart_register + * this function builds up a uart register message and sends to the device. + *****************************************************************************/ +static int send_cmd_write_uart_register(struct edgeport_port *edge_port, + __u8 regNum, __u8 regValue) +{ + struct edgeport_serial *edge_serial = + usb_get_serial_data(edge_port->port->serial); + struct device *dev = &edge_port->port->dev; + unsigned char *cmdBuffer; + unsigned char *currCmd; + unsigned long cmdLen = 0; + int status; + + dev_dbg(dev, "%s - write to %s register 0x%02x\n", + (regNum == MCR) ? "MCR" : "LCR", __func__, regValue); + + if (edge_serial->is_epic && + !edge_serial->epic_descriptor.Supports.IOSPWriteMCR && + regNum == MCR) { + dev_dbg(dev, "SendCmdWriteUartReg - Not writing to MCR Register\n"); + return 0; + } + + if (edge_serial->is_epic && + !edge_serial->epic_descriptor.Supports.IOSPWriteLCR && + regNum == LCR) { + dev_dbg(dev, "SendCmdWriteUartReg - Not writing to LCR Register\n"); + return 0; + } + + /* Alloc memory for the string of commands. */ + cmdBuffer = kmalloc(0x10, GFP_ATOMIC); + if (cmdBuffer == NULL) + return -ENOMEM; + + currCmd = cmdBuffer; + + /* Build a cmd in the buffer to write the given register */ + MAKE_CMD_WRITE_REG(&currCmd, &cmdLen, edge_port->port->port_number, + regNum, regValue); + + status = write_cmd_usb(edge_port, cmdBuffer, cmdLen); + if (status) { + /* something bad happened, let's free up the memory */ + kfree(cmdBuffer); + } + + return status; +} + + +/***************************************************************************** + * change_port_settings + * This routine is called to set the UART on the device to match the + * specified new settings. + *****************************************************************************/ + +static void change_port_settings(struct tty_struct *tty, + struct edgeport_port *edge_port, struct ktermios *old_termios) +{ + struct device *dev = &edge_port->port->dev; + struct edgeport_serial *edge_serial = + usb_get_serial_data(edge_port->port->serial); + int baud; + unsigned cflag; + __u8 mask = 0xff; + __u8 lData; + __u8 lParity; + __u8 lStop; + __u8 rxFlow; + __u8 txFlow; + int status; + + if (!edge_port->open && + !edge_port->openPending) { + dev_dbg(dev, "%s - port not opened\n", __func__); + return; + } + + cflag = tty->termios.c_cflag; + + switch (cflag & CSIZE) { + case CS5: + lData = LCR_BITS_5; mask = 0x1f; + dev_dbg(dev, "%s - data bits = 5\n", __func__); + break; + case CS6: + lData = LCR_BITS_6; mask = 0x3f; + dev_dbg(dev, "%s - data bits = 6\n", __func__); + break; + case CS7: + lData = LCR_BITS_7; mask = 0x7f; + dev_dbg(dev, "%s - data bits = 7\n", __func__); + break; + default: + case CS8: + lData = LCR_BITS_8; + dev_dbg(dev, "%s - data bits = 8\n", __func__); + break; + } + + lParity = LCR_PAR_NONE; + if (cflag & PARENB) { + if (cflag & CMSPAR) { + if (cflag & PARODD) { + lParity = LCR_PAR_MARK; + dev_dbg(dev, "%s - parity = mark\n", __func__); + } else { + lParity = LCR_PAR_SPACE; + dev_dbg(dev, "%s - parity = space\n", __func__); + } + } else if (cflag & PARODD) { + lParity = LCR_PAR_ODD; + dev_dbg(dev, "%s - parity = odd\n", __func__); + } else { + lParity = LCR_PAR_EVEN; + dev_dbg(dev, "%s - parity = even\n", __func__); + } + } else { + dev_dbg(dev, "%s - parity = none\n", __func__); + } + + if (cflag & CSTOPB) { + lStop = LCR_STOP_2; + dev_dbg(dev, "%s - stop bits = 2\n", __func__); + } else { + lStop = LCR_STOP_1; + dev_dbg(dev, "%s - stop bits = 1\n", __func__); + } + + /* figure out the flow control settings */ + rxFlow = txFlow = 0x00; + if (cflag & CRTSCTS) { + rxFlow |= IOSP_RX_FLOW_RTS; + txFlow |= IOSP_TX_FLOW_CTS; + dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__); + } else { + dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__); + } + + /* if we are implementing XON/XOFF, set the start and stop character + in the device */ + if (I_IXOFF(tty) || I_IXON(tty)) { + unsigned char stop_char = STOP_CHAR(tty); + unsigned char start_char = START_CHAR(tty); + + if ((!edge_serial->is_epic) || + ((edge_serial->is_epic) && + (edge_serial->epic_descriptor.Supports.IOSPSetXChar))) { + send_iosp_ext_cmd(edge_port, + IOSP_CMD_SET_XON_CHAR, start_char); + send_iosp_ext_cmd(edge_port, + IOSP_CMD_SET_XOFF_CHAR, stop_char); + } + + /* if we are implementing INBOUND XON/XOFF */ + if (I_IXOFF(tty)) { + rxFlow |= IOSP_RX_FLOW_XON_XOFF; + dev_dbg(dev, "%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", + __func__, start_char, stop_char); + } else { + dev_dbg(dev, "%s - INBOUND XON/XOFF is disabled\n", __func__); + } + + /* if we are implementing OUTBOUND XON/XOFF */ + if (I_IXON(tty)) { + txFlow |= IOSP_TX_FLOW_XON_XOFF; + dev_dbg(dev, "%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", + __func__, start_char, stop_char); + } else { + dev_dbg(dev, "%s - OUTBOUND XON/XOFF is disabled\n", __func__); + } + } + + /* Set flow control to the configured value */ + if ((!edge_serial->is_epic) || + ((edge_serial->is_epic) && + (edge_serial->epic_descriptor.Supports.IOSPSetRxFlow))) + send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_RX_FLOW, rxFlow); + if ((!edge_serial->is_epic) || + ((edge_serial->is_epic) && + (edge_serial->epic_descriptor.Supports.IOSPSetTxFlow))) + send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_TX_FLOW, txFlow); + + + edge_port->shadowLCR &= ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); + edge_port->shadowLCR |= (lData | lParity | lStop); + + edge_port->validDataMask = mask; + + /* Send the updated LCR value to the EdgePort */ + status = send_cmd_write_uart_register(edge_port, LCR, + edge_port->shadowLCR); + if (status != 0) + return; + + /* set up the MCR register and send it to the EdgePort */ + edge_port->shadowMCR = MCR_MASTER_IE; + if (cflag & CBAUD) + edge_port->shadowMCR |= (MCR_DTR | MCR_RTS); + + status = send_cmd_write_uart_register(edge_port, MCR, + edge_port->shadowMCR); + if (status != 0) + return; + + /* Determine divisor based on baud rate */ + baud = tty_get_baud_rate(tty); + if (!baud) { + /* pick a default, any default... */ + baud = 9600; + } + + dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud); + status = send_cmd_write_baud_rate(edge_port, baud); + if (status == -1) { + /* Speed change was not possible - put back the old speed */ + baud = tty_termios_baud_rate(old_termios); + tty_encode_baud_rate(tty, baud, baud); + } +} + + +/**************************************************************************** + * unicode_to_ascii + * Turns a string from Unicode into ASCII. + * Doesn't do a good job with any characters that are outside the normal + * ASCII range, but it's only for debugging... + * NOTE: expects the unicode in LE format + ****************************************************************************/ +static void unicode_to_ascii(char *string, int buflen, + __le16 *unicode, int unicode_size) +{ + int i; + + if (buflen <= 0) /* never happens, but... */ + return; + --buflen; /* space for nul */ + + for (i = 0; i < unicode_size; i++) { + if (i >= buflen) + break; + string[i] = (char)(le16_to_cpu(unicode[i])); + } + string[i] = 0x00; +} + + +/**************************************************************************** + * get_manufacturing_desc + * reads in the manufacturing descriptor and stores it into the serial + * structure. + ****************************************************************************/ +static void get_manufacturing_desc(struct edgeport_serial *edge_serial) +{ + struct device *dev = &edge_serial->serial->dev->dev; + int response; + + dev_dbg(dev, "getting manufacturer descriptor\n"); + + response = rom_read(edge_serial->serial, + (EDGE_MANUF_DESC_ADDR & 0xffff0000) >> 16, + (__u16)(EDGE_MANUF_DESC_ADDR & 0x0000ffff), + EDGE_MANUF_DESC_LEN, + (__u8 *)(&edge_serial->manuf_descriptor)); + + if (response < 1) + dev_err(dev, "error in getting manufacturer descriptor\n"); + else { + char string[30]; + dev_dbg(dev, "**Manufacturer Descriptor\n"); + dev_dbg(dev, " RomSize: %dK\n", + edge_serial->manuf_descriptor.RomSize); + dev_dbg(dev, " RamSize: %dK\n", + edge_serial->manuf_descriptor.RamSize); + dev_dbg(dev, " CpuRev: %d\n", + edge_serial->manuf_descriptor.CpuRev); + dev_dbg(dev, " BoardRev: %d\n", + edge_serial->manuf_descriptor.BoardRev); + dev_dbg(dev, " NumPorts: %d\n", + edge_serial->manuf_descriptor.NumPorts); + dev_dbg(dev, " DescDate: %d/%d/%d\n", + edge_serial->manuf_descriptor.DescDate[0], + edge_serial->manuf_descriptor.DescDate[1], + edge_serial->manuf_descriptor.DescDate[2]+1900); + unicode_to_ascii(string, sizeof(string), + edge_serial->manuf_descriptor.SerialNumber, + edge_serial->manuf_descriptor.SerNumLength/2); + dev_dbg(dev, " SerialNumber: %s\n", string); + unicode_to_ascii(string, sizeof(string), + edge_serial->manuf_descriptor.AssemblyNumber, + edge_serial->manuf_descriptor.AssemblyNumLength/2); + dev_dbg(dev, " AssemblyNumber: %s\n", string); + unicode_to_ascii(string, sizeof(string), + edge_serial->manuf_descriptor.OemAssyNumber, + edge_serial->manuf_descriptor.OemAssyNumLength/2); + dev_dbg(dev, " OemAssyNumber: %s\n", string); + dev_dbg(dev, " UartType: %d\n", + edge_serial->manuf_descriptor.UartType); + dev_dbg(dev, " IonPid: %d\n", + edge_serial->manuf_descriptor.IonPid); + dev_dbg(dev, " IonConfig: %d\n", + edge_serial->manuf_descriptor.IonConfig); + } +} + + +/**************************************************************************** + * get_boot_desc + * reads in the bootloader descriptor and stores it into the serial + * structure. + ****************************************************************************/ +static void get_boot_desc(struct edgeport_serial *edge_serial) +{ + struct device *dev = &edge_serial->serial->dev->dev; + int response; + + dev_dbg(dev, "getting boot descriptor\n"); + + response = rom_read(edge_serial->serial, + (EDGE_BOOT_DESC_ADDR & 0xffff0000) >> 16, + (__u16)(EDGE_BOOT_DESC_ADDR & 0x0000ffff), + EDGE_BOOT_DESC_LEN, + (__u8 *)(&edge_serial->boot_descriptor)); + + if (response < 1) + dev_err(dev, "error in getting boot descriptor\n"); + else { + dev_dbg(dev, "**Boot Descriptor:\n"); + dev_dbg(dev, " BootCodeLength: %d\n", + le16_to_cpu(edge_serial->boot_descriptor.BootCodeLength)); + dev_dbg(dev, " MajorVersion: %d\n", + edge_serial->boot_descriptor.MajorVersion); + dev_dbg(dev, " MinorVersion: %d\n", + edge_serial->boot_descriptor.MinorVersion); + dev_dbg(dev, " BuildNumber: %d\n", + le16_to_cpu(edge_serial->boot_descriptor.BuildNumber)); + dev_dbg(dev, " Capabilities: 0x%x\n", + le16_to_cpu(edge_serial->boot_descriptor.Capabilities)); + dev_dbg(dev, " UConfig0: %d\n", + edge_serial->boot_descriptor.UConfig0); + dev_dbg(dev, " UConfig1: %d\n", + edge_serial->boot_descriptor.UConfig1); + } +} + + +/**************************************************************************** + * load_application_firmware + * This is called to load the application firmware to the device + ****************************************************************************/ +static void load_application_firmware(struct edgeport_serial *edge_serial) +{ + struct device *dev = &edge_serial->serial->dev->dev; + const struct ihex_binrec *rec; + const struct firmware *fw; + const char *fw_name; + const char *fw_info; + int response; + __u32 Operaddr; + __u16 build; + + switch (edge_serial->product_info.iDownloadFile) { + case EDGE_DOWNLOAD_FILE_I930: + fw_info = "downloading firmware version (930)"; + fw_name = "edgeport/down.fw"; + break; + + case EDGE_DOWNLOAD_FILE_80251: + fw_info = "downloading firmware version (80251)"; + fw_name = "edgeport/down2.fw"; + break; + + case EDGE_DOWNLOAD_FILE_NONE: + dev_dbg(dev, "No download file specified, skipping download\n"); + return; + + default: + return; + } + + response = request_ihex_firmware(&fw, fw_name, + &edge_serial->serial->dev->dev); + if (response) { + dev_err(dev, "Failed to load image \"%s\" err %d\n", + fw_name, response); + return; + } + + rec = (const struct ihex_binrec *)fw->data; + build = (rec->data[2] << 8) | rec->data[3]; + + dev_dbg(dev, "%s %d.%d.%d\n", fw_info, rec->data[0], rec->data[1], build); + + edge_serial->product_info.FirmwareMajorVersion = rec->data[0]; + edge_serial->product_info.FirmwareMinorVersion = rec->data[1]; + edge_serial->product_info.FirmwareBuildNumber = cpu_to_le16(build); + + for (rec = ihex_next_binrec(rec); rec; + rec = ihex_next_binrec(rec)) { + Operaddr = be32_to_cpu(rec->addr); + response = sram_write(edge_serial->serial, + Operaddr >> 16, + Operaddr & 0xFFFF, + be16_to_cpu(rec->len), + &rec->data[0]); + if (response < 0) { + dev_err(&edge_serial->serial->dev->dev, + "sram_write failed (%x, %x, %d)\n", + Operaddr >> 16, Operaddr & 0xFFFF, + be16_to_cpu(rec->len)); + break; + } + } + + dev_dbg(dev, "sending exec_dl_code\n"); + response = usb_control_msg (edge_serial->serial->dev, + usb_sndctrlpipe(edge_serial->serial->dev, 0), + USB_REQUEST_ION_EXEC_DL_CODE, + 0x40, 0x4000, 0x0001, NULL, 0, 3000); + + release_firmware(fw); +} + + +/**************************************************************************** + * edge_startup + ****************************************************************************/ +static int edge_startup(struct usb_serial *serial) +{ + struct edgeport_serial *edge_serial; + struct usb_device *dev; + struct device *ddev = &serial->dev->dev; + int i; + int response; + bool interrupt_in_found; + bool bulk_in_found; + bool bulk_out_found; + static __u32 descriptor[3] = { EDGE_COMPATIBILITY_MASK0, + EDGE_COMPATIBILITY_MASK1, + EDGE_COMPATIBILITY_MASK2 }; + + dev = serial->dev; + + /* create our private serial structure */ + edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL); + if (!edge_serial) + return -ENOMEM; + + spin_lock_init(&edge_serial->es_lock); + edge_serial->serial = serial; + usb_set_serial_data(serial, edge_serial); + + /* get the name for the device from the device */ + i = usb_string(dev, dev->descriptor.iManufacturer, + &edge_serial->name[0], MAX_NAME_LEN+1); + if (i < 0) + i = 0; + edge_serial->name[i++] = ' '; + usb_string(dev, dev->descriptor.iProduct, + &edge_serial->name[i], MAX_NAME_LEN+2 - i); + + dev_info(&serial->dev->dev, "%s detected\n", edge_serial->name); + + /* Read the epic descriptor */ + if (get_epic_descriptor(edge_serial) <= 0) { + /* memcpy descriptor to Supports structures */ + memcpy(&edge_serial->epic_descriptor.Supports, descriptor, + sizeof(struct edge_compatibility_bits)); + + /* get the manufacturing descriptor for this device */ + get_manufacturing_desc(edge_serial); + + /* get the boot descriptor */ + get_boot_desc(edge_serial); + + get_product_info(edge_serial); + } + + /* set the number of ports from the manufacturing description */ + /* serial->num_ports = serial->product_info.NumPorts; */ + if ((!edge_serial->is_epic) && + (edge_serial->product_info.NumPorts != serial->num_ports)) { + dev_warn(ddev, + "Device Reported %d serial ports vs. core thinking we have %d ports, email greg@kroah.com this information.\n", + edge_serial->product_info.NumPorts, + serial->num_ports); + } + + dev_dbg(ddev, "%s - time 1 %ld\n", __func__, jiffies); + + /* If not an EPiC device */ + if (!edge_serial->is_epic) { + /* now load the application firmware into this device */ + load_application_firmware(edge_serial); + + dev_dbg(ddev, "%s - time 2 %ld\n", __func__, jiffies); + + /* Check current Edgeport EEPROM and update if necessary */ + update_edgeport_E2PROM(edge_serial); + + dev_dbg(ddev, "%s - time 3 %ld\n", __func__, jiffies); + + /* set the configuration to use #1 */ +/* dev_dbg(ddev, "set_configuration 1\n"); */ +/* usb_set_configuration (dev, 1); */ + } + dev_dbg(ddev, " FirmwareMajorVersion %d.%d.%d\n", + edge_serial->product_info.FirmwareMajorVersion, + edge_serial->product_info.FirmwareMinorVersion, + le16_to_cpu(edge_serial->product_info.FirmwareBuildNumber)); + + /* we set up the pointers to the endpoints in the edge_open function, + * as the structures aren't created yet. */ + + response = 0; + + if (edge_serial->is_epic) { + /* EPIC thing, set up our interrupt polling now and our read + * urb, so that the device knows it really is connected. */ + interrupt_in_found = bulk_in_found = bulk_out_found = false; + for (i = 0; i < serial->interface->altsetting[0] + .desc.bNumEndpoints; ++i) { + struct usb_endpoint_descriptor *endpoint; + int buffer_size; + + endpoint = &serial->interface->altsetting[0]. + endpoint[i].desc; + buffer_size = usb_endpoint_maxp(endpoint); + if (!interrupt_in_found && + (usb_endpoint_is_int_in(endpoint))) { + /* we found a interrupt in endpoint */ + dev_dbg(ddev, "found interrupt in\n"); + + /* not set up yet, so do it now */ + edge_serial->interrupt_read_urb = + usb_alloc_urb(0, GFP_KERNEL); + if (!edge_serial->interrupt_read_urb) + return -ENOMEM; + + edge_serial->interrupt_in_buffer = + kmalloc(buffer_size, GFP_KERNEL); + if (!edge_serial->interrupt_in_buffer) { + usb_free_urb(edge_serial->interrupt_read_urb); + return -ENOMEM; + } + edge_serial->interrupt_in_endpoint = + endpoint->bEndpointAddress; + + /* set up our interrupt urb */ + usb_fill_int_urb( + edge_serial->interrupt_read_urb, + dev, + usb_rcvintpipe(dev, + endpoint->bEndpointAddress), + edge_serial->interrupt_in_buffer, + buffer_size, + edge_interrupt_callback, + edge_serial, + endpoint->bInterval); + + interrupt_in_found = true; + } + + if (!bulk_in_found && + (usb_endpoint_is_bulk_in(endpoint))) { + /* we found a bulk in endpoint */ + dev_dbg(ddev, "found bulk in\n"); + + /* not set up yet, so do it now */ + edge_serial->read_urb = + usb_alloc_urb(0, GFP_KERNEL); + if (!edge_serial->read_urb) + return -ENOMEM; + + edge_serial->bulk_in_buffer = + kmalloc(buffer_size, GFP_KERNEL); + if (!edge_serial->bulk_in_buffer) { + usb_free_urb(edge_serial->read_urb); + return -ENOMEM; + } + edge_serial->bulk_in_endpoint = + endpoint->bEndpointAddress; + + /* set up our bulk in urb */ + usb_fill_bulk_urb(edge_serial->read_urb, dev, + usb_rcvbulkpipe(dev, + endpoint->bEndpointAddress), + edge_serial->bulk_in_buffer, + usb_endpoint_maxp(endpoint), + edge_bulk_in_callback, + edge_serial); + bulk_in_found = true; + } + + if (!bulk_out_found && + (usb_endpoint_is_bulk_out(endpoint))) { + /* we found a bulk out endpoint */ + dev_dbg(ddev, "found bulk out\n"); + edge_serial->bulk_out_endpoint = + endpoint->bEndpointAddress; + bulk_out_found = true; + } + } + + if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) { + dev_err(ddev, "Error - the proper endpoints were not found!\n"); + return -ENODEV; + } + + /* start interrupt read for this edgeport this interrupt will + * continue as long as the edgeport is connected */ + response = usb_submit_urb(edge_serial->interrupt_read_urb, + GFP_KERNEL); + if (response) + dev_err(ddev, "%s - Error %d submitting control urb\n", + __func__, response); + } + return response; +} + + +/**************************************************************************** + * edge_disconnect + * This function is called whenever the device is removed from the usb bus. + ****************************************************************************/ +static void edge_disconnect(struct usb_serial *serial) +{ + struct edgeport_serial *edge_serial = usb_get_serial_data(serial); + + /* stop reads and writes on all ports */ + /* free up our endpoint stuff */ + if (edge_serial->is_epic) { + usb_kill_urb(edge_serial->interrupt_read_urb); + usb_free_urb(edge_serial->interrupt_read_urb); + kfree(edge_serial->interrupt_in_buffer); + + usb_kill_urb(edge_serial->read_urb); + usb_free_urb(edge_serial->read_urb); + kfree(edge_serial->bulk_in_buffer); + } +} + + +/**************************************************************************** + * edge_release + * This function is called when the device structure is deallocated. + ****************************************************************************/ +static void edge_release(struct usb_serial *serial) +{ + struct edgeport_serial *edge_serial = usb_get_serial_data(serial); + + kfree(edge_serial); +} + +static int edge_port_probe(struct usb_serial_port *port) +{ + struct edgeport_port *edge_port; + + edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL); + if (!edge_port) + return -ENOMEM; + + spin_lock_init(&edge_port->ep_lock); + edge_port->port = port; + + usb_set_serial_port_data(port, edge_port); + + return 0; +} + +static int edge_port_remove(struct usb_serial_port *port) +{ + struct edgeport_port *edge_port; + + edge_port = usb_get_serial_port_data(port); + kfree(edge_port); + + return 0; +} + +module_usb_serial_driver(serial_drivers, id_table_combined); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("edgeport/boot.fw"); +MODULE_FIRMWARE("edgeport/boot2.fw"); +MODULE_FIRMWARE("edgeport/down.fw"); +MODULE_FIRMWARE("edgeport/down2.fw"); diff --git a/kernel/drivers/usb/serial/io_edgeport.h b/kernel/drivers/usb/serial/io_edgeport.h new file mode 100644 index 000000000..ad9c1d47a --- /dev/null +++ b/kernel/drivers/usb/serial/io_edgeport.h @@ -0,0 +1,134 @@ +/************************************************************************ + * + * io_edgeport.h Edgeport Linux Interface definitions + * + * Copyright (C) 2000 Inside Out Networks, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * + ************************************************************************/ + +#if !defined(_IO_EDGEPORT_H_) +#define _IO_EDGEPORT_H_ + + +#define MAX_RS232_PORTS 8 /* Max # of RS-232 ports per device */ + +/* typedefs that the insideout headers need */ +#ifndef LOW8 + #define LOW8(a) ((unsigned char)(a & 0xff)) +#endif +#ifndef HIGH8 + #define HIGH8(a) ((unsigned char)((a & 0xff00) >> 8)) +#endif + +#ifndef __KERNEL__ +#define __KERNEL__ +#endif + +#include "io_usbvend.h" + + + +/* The following table is used to map the USBx port number to + * the device serial number (or physical USB path), */ +#define MAX_EDGEPORTS 64 + +struct comMapper { + char SerialNumber[MAX_SERIALNUMBER_LEN+1]; /* Serial number/usb path */ + int numPorts; /* Number of ports */ + int Original[MAX_RS232_PORTS]; /* Port numbers set by IOCTL */ + int Port[MAX_RS232_PORTS]; /* Actual used port numbers */ +}; + + +#define EDGEPORT_CONFIG_DEVICE "/proc/edgeport" + +/* /proc/edgeport Interface + * This interface uses read/write/lseek interface to talk to the edgeport driver + * the following read functions are supported: */ +#define PROC_GET_MAPPING_TO_PATH 1 +#define PROC_GET_COM_ENTRY 2 +#define PROC_GET_EDGE_MANUF_DESCRIPTOR 3 +#define PROC_GET_BOOT_DESCRIPTOR 4 +#define PROC_GET_PRODUCT_INFO 5 +#define PROC_GET_STRINGS 6 +#define PROC_GET_CURRENT_COM_MAPPING 7 + +/* The parameters to the lseek() for the read is: */ +#define PROC_READ_SETUP(Command, Argument) ((Command) + ((Argument)<<8)) + + +/* the following write functions are supported: */ +#define PROC_SET_COM_MAPPING 1 +#define PROC_SET_COM_ENTRY 2 + + +/* The following structure is passed to the write */ +struct procWrite { + int Command; + union { + struct comMapper Entry; + int ComMappingBasedOnUSBPort; /* Boolean value */ + } u; +}; + +/* + * Product information read from the Edgeport + */ +struct edgeport_product_info { + __u16 ProductId; /* Product Identifier */ + __u8 NumPorts; /* Number of ports on edgeport */ + __u8 ProdInfoVer; /* What version of structure is this? */ + + __u32 IsServer :1; /* Set if Server */ + __u32 IsRS232 :1; /* Set if RS-232 ports exist */ + __u32 IsRS422 :1; /* Set if RS-422 ports exist */ + __u32 IsRS485 :1; /* Set if RS-485 ports exist */ + __u32 IsReserved :28; /* Reserved for later expansion */ + + __u8 RomSize; /* Size of ROM/E2PROM in K */ + __u8 RamSize; /* Size of external RAM in K */ + __u8 CpuRev; /* CPU revision level (chg only if s/w visible) */ + __u8 BoardRev; /* PCB revision level (chg only if s/w visible) */ + + __u8 BootMajorVersion; /* Boot Firmware version: xx. */ + __u8 BootMinorVersion; /* yy. */ + __le16 BootBuildNumber; /* zzzz (LE format) */ + + __u8 FirmwareMajorVersion; /* Operational Firmware version:xx. */ + __u8 FirmwareMinorVersion; /* yy. */ + __le16 FirmwareBuildNumber; /* zzzz (LE format) */ + + __u8 ManufactureDescDate[3]; /* MM/DD/YY when descriptor template was compiled */ + __u8 HardwareType; + + __u8 iDownloadFile; /* What to download to EPiC device */ + __u8 EpicVer; /* What version of EPiC spec this device supports */ + + struct edge_compatibility_bits Epic; +}; + +/* + * Edgeport Stringblock String locations + */ +#define EDGESTRING_MANUFNAME 1 /* Manufacture Name */ +#define EDGESTRING_PRODNAME 2 /* Product Name */ +#define EDGESTRING_SERIALNUM 3 /* Serial Number */ +#define EDGESTRING_ASSEMNUM 4 /* Assembly Number */ +#define EDGESTRING_OEMASSEMNUM 5 /* OEM Assembly Number */ +#define EDGESTRING_MANUFDATE 6 /* Manufacture Date */ +#define EDGESTRING_ORIGSERIALNUM 7 /* Serial Number */ + +struct string_block { + __u16 NumStrings; /* Number of strings in block */ + __u16 Strings[1]; /* Start of string block */ +}; + + + +#endif diff --git a/kernel/drivers/usb/serial/io_ionsp.h b/kernel/drivers/usb/serial/io_ionsp.h new file mode 100644 index 000000000..5cc591bae --- /dev/null +++ b/kernel/drivers/usb/serial/io_ionsp.h @@ -0,0 +1,455 @@ +/************************************************************************ + * + * IONSP.H Definitions for I/O Networks Serial Protocol + * + * Copyright (C) 1997-1998 Inside Out Networks, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * These definitions are used by both kernel-mode driver and the + * peripheral firmware and MUST be kept in sync. + * + ************************************************************************/ + +/************************************************************************ + +The data to and from all ports on the peripheral is multiplexed +through a single endpoint pair (EP1 since it supports 64-byte +MaxPacketSize). Therefore, the data, commands, and status for +each port must be preceded by a short header identifying the +destination port. The header also identifies the bytes that follow +as data or as command/status info. + +Header format, first byte: + + CLLLLPPP + -------- + | | |------ Port Number: 0-7 + | |--------- Length: MSB bits of length + |----------- Data/Command: 0 = Data header + 1 = Cmd / Status (Cmd if OUT, Status if IN) + +This gives 2 possible formats: + + + Data header: 0LLLLPPP LLLLLLLL + ============ + + Where (LLLL,LLLLLLL) is 12-bit length of data that follows for + port number (PPP). The length is 0-based (0-FFF means 0-4095 + bytes). The ~4K limit allows the host driver (which deals in + transfer requests instead of individual packets) to write a + large chunk of data in a single request. Note, however, that + the length must always be <= the current TxCredits for a given + port due to buffering limitations on the peripheral. + + + Cmd/Status header: 1ccccPPP [ CCCCCCCC, Params ]... + ================== + + Where (cccc) or (cccc,CCCCCCCC) is the cmd or status identifier. + Frequently-used values are encoded as (cccc), longer ones using + (cccc,CCCCCCCC). Subsequent bytes are optional parameters and are + specific to the cmd or status code. This may include a length + for command and status codes that need variable-length parameters. + + +In addition, we use another interrupt pipe (endpoint) which the host polls +periodically for flow control information. The peripheral, when there has +been a change, sends the following 10-byte packet: + + RRRRRRRRRRRRRRRR + T0T0T0T0T0T0T0T0 + T1T1T1T1T1T1T1T1 + T2T2T2T2T2T2T2T2 + T3T3T3T3T3T3T3T3 + +The first field is the 16-bit RxBytesAvail field, which indicates the +number of bytes which may be read by the host from EP1. This is necessary: +(a) because OSR2.1 has a bug which causes data loss if the peripheral returns +fewer bytes than the host expects to read, and (b) because, on Microsoft +platforms at least, an outstanding read posted on EP1 consumes about 35% of +the CPU just polling the device for data. + +The next 4 fields are the 16-bit TxCredits for each port, which indicate how +many bytes the host is allowed to send on EP1 for transmit to a given port. +After an OPEN_PORT command, the Edgeport sends the initial TxCredits for that +port. + +All 16-bit fields are sent in little-endian (Intel) format. + +************************************************************************/ + +// +// Define format of InterruptStatus packet returned from the +// Interrupt pipe +// + +struct int_status_pkt { + __u16 RxBytesAvail; // Additional bytes available to + // be read from Bulk IN pipe + __u16 TxCredits[MAX_RS232_PORTS]; // Additional space available in + // given port's TxBuffer +}; + + +#define GET_INT_STATUS_SIZE(NumPorts) (sizeof(__u16) + (sizeof(__u16) * (NumPorts))) + + + +// +// Define cmd/status header values and macros to extract them. +// +// Data: 0LLLLPPP LLLLLLLL +// Cmd/Stat: 1ccccPPP CCCCCCCC + +#define IOSP_DATA_HDR_SIZE 2 +#define IOSP_CMD_HDR_SIZE 2 + +#define IOSP_MAX_DATA_LENGTH 0x0FFF // 12 bits -> 4K + +#define IOSP_PORT_MASK 0x07 // Mask to isolate port number +#define IOSP_CMD_STAT_BIT 0x80 // If set, this is command/status header + +#define IS_CMD_STAT_HDR(Byte1) ((Byte1) & IOSP_CMD_STAT_BIT) +#define IS_DATA_HDR(Byte1) (!IS_CMD_STAT_HDR(Byte1)) + +#define IOSP_GET_HDR_PORT(Byte1) ((__u8) ((Byte1) & IOSP_PORT_MASK)) +#define IOSP_GET_HDR_DATA_LEN(Byte1, Byte2) ((__u16) (((__u16)((Byte1) & 0x78)) << 5) | (Byte2)) +#define IOSP_GET_STATUS_CODE(Byte1) ((__u8) (((Byte1) & 0x78) >> 3)) + + +// +// These macros build the 1st and 2nd bytes for a data header +// +#define IOSP_BUILD_DATA_HDR1(Port, Len) ((__u8) (((Port) | ((__u8) (((__u16) (Len)) >> 5) & 0x78)))) +#define IOSP_BUILD_DATA_HDR2(Port, Len) ((__u8) (Len)) + + +// +// These macros build the 1st and 2nd bytes for a command header +// +#define IOSP_BUILD_CMD_HDR1(Port, Cmd) ((__u8) (IOSP_CMD_STAT_BIT | (Port) | ((__u8) ((Cmd) << 3)))) + + +//-------------------------------------------------------------- +// +// Define values for commands and command parameters +// (sent from Host to Edgeport) +// +// 1ccccPPP P1P1P1P1 [ P2P2P2P2P2 ]... +// +// cccc: 00-07 2-byte commands. Write UART register 0-7 with +// value in P1. See 16650.H for definitions of +// UART register numbers and contents. +// +// 08-0B 3-byte commands: ==== P1 ==== ==== P2 ==== +// 08 available for expansion +// 09 1-param commands Command Code Param +// 0A available for expansion +// 0B available for expansion +// +// 0C-0D 4-byte commands. P1 = extended cmd and P2,P3 = params +// Currently unimplemented. +// +// 0E-0F N-byte commands: P1 = num bytes after P1 (ie, TotalLen - 2) +// P2 = extended cmd, P3..Pn = parameters. +// Currently unimplemented. +// + +#define IOSP_WRITE_UART_REG(n) ((n) & 0x07) // UartReg[ n ] := P1 + +// Register numbers and contents +// defined in 16554.H. + +// 0x08 // Available for expansion. +#define IOSP_EXT_CMD 0x09 // P1 = Command code (defined below) + +// P2 = Parameter + +// +// Extended Command values, used with IOSP_EXT_CMD, may +// or may not use parameter P2. +// + +#define IOSP_CMD_OPEN_PORT 0x00 // Enable ints, init UART. (NO PARAM) +#define IOSP_CMD_CLOSE_PORT 0x01 // Disable ints, flush buffers. (NO PARAM) +#define IOSP_CMD_CHASE_PORT 0x02 // Wait for Edgeport TX buffers to empty. (NO PARAM) +#define IOSP_CMD_SET_RX_FLOW 0x03 // Set Rx Flow Control in Edgeport +#define IOSP_CMD_SET_TX_FLOW 0x04 // Set Tx Flow Control in Edgeport +#define IOSP_CMD_SET_XON_CHAR 0x05 // Set XON Character in Edgeport +#define IOSP_CMD_SET_XOFF_CHAR 0x06 // Set XOFF Character in Edgeport +#define IOSP_CMD_RX_CHECK_REQ 0x07 // Request Edgeport to insert a Checkpoint into + +// the receive data stream (Parameter = 1 byte sequence number) + +#define IOSP_CMD_SET_BREAK 0x08 // Turn on the BREAK (LCR bit 6) +#define IOSP_CMD_CLEAR_BREAK 0x09 // Turn off the BREAK (LCR bit 6) + + +// +// Define macros to simplify building of IOSP cmds +// + +#define MAKE_CMD_WRITE_REG(ppBuf, pLen, Port, Reg, Val) \ +do { \ + (*(ppBuf))[0] = IOSP_BUILD_CMD_HDR1((Port), \ + IOSP_WRITE_UART_REG(Reg)); \ + (*(ppBuf))[1] = (Val); \ + \ + *ppBuf += 2; \ + *pLen += 2; \ +} while (0) + +#define MAKE_CMD_EXT_CMD(ppBuf, pLen, Port, ExtCmd, Param) \ +do { \ + (*(ppBuf))[0] = IOSP_BUILD_CMD_HDR1((Port), IOSP_EXT_CMD); \ + (*(ppBuf))[1] = (ExtCmd); \ + (*(ppBuf))[2] = (Param); \ + \ + *ppBuf += 3; \ + *pLen += 3; \ +} while (0) + + + +//-------------------------------------------------------------- +// +// Define format of flow control commands +// (sent from Host to Edgeport) +// +// 11001PPP FlowCmd FlowTypes +// +// Note that the 'FlowTypes' parameter is a bit mask; that is, +// more than one flow control type can be active at the same time. +// FlowTypes = 0 means 'no flow control'. +// + +// +// IOSP_CMD_SET_RX_FLOW +// +// Tells Edgeport how it can stop incoming UART data +// +// Example for Port 0 +// P0 = 11001000 +// P1 = IOSP_CMD_SET_RX_FLOW +// P2 = Bit mask as follows: + +#define IOSP_RX_FLOW_RTS 0x01 // Edgeport drops RTS to stop incoming data +#define IOSP_RX_FLOW_DTR 0x02 // Edgeport drops DTR to stop incoming data +#define IOSP_RX_FLOW_DSR_SENSITIVITY 0x04 // Ignores Rx data unless DSR high + +// Not currently implemented by firmware. +#define IOSP_RX_FLOW_XON_XOFF 0x08 // Edgeport sends XOFF char to stop incoming data. + +// Host must have previously programmed the +// XON/XOFF values with SET_XON/SET_XOFF +// before enabling this bit. + +// +// IOSP_CMD_SET_TX_FLOW +// +// Tells Edgeport what signal(s) will stop it from transmitting UART data +// +// Example for Port 0 +// P0 = 11001000 +// P1 = IOSP_CMD_SET_TX_FLOW +// P2 = Bit mask as follows: + +#define IOSP_TX_FLOW_CTS 0x01 // Edgeport stops Tx if CTS low +#define IOSP_TX_FLOW_DSR 0x02 // Edgeport stops Tx if DSR low +#define IOSP_TX_FLOW_DCD 0x04 // Edgeport stops Tx if DCD low +#define IOSP_TX_FLOW_XON_XOFF 0x08 // Edgeport stops Tx upon receiving XOFF char. + +// Host must have previously programmed the +// XON/XOFF values with SET_XON/SET_XOFF +// before enabling this bit. +#define IOSP_TX_FLOW_XOFF_CONTINUE 0x10 // If not set, Edgeport stops Tx when + +// sending XOFF in order to fix broken +// systems that interpret the next +// received char as XON. +// If set, Edgeport continues Tx +// normally after transmitting XOFF. +// Not currently implemented by firmware. +#define IOSP_TX_TOGGLE_RTS 0x20 // Edgeport drives RTS as a true half-duplex + +// Request-to-Send signal: it is raised before +// beginning transmission and lowered after +// the last Tx char leaves the UART. +// Not currently implemented by firmware. + +// +// IOSP_CMD_SET_XON_CHAR +// +// Sets the character which Edgeport transmits/interprets as XON. +// Note: This command MUST be sent before sending a SET_RX_FLOW or +// SET_TX_FLOW with the XON_XOFF bit set. +// +// Example for Port 0 +// P0 = 11001000 +// P1 = IOSP_CMD_SET_XON_CHAR +// P2 = 0x11 + + +// +// IOSP_CMD_SET_XOFF_CHAR +// +// Sets the character which Edgeport transmits/interprets as XOFF. +// Note: This command must be sent before sending a SET_RX_FLOW or +// SET_TX_FLOW with the XON_XOFF bit set. +// +// Example for Port 0 +// P0 = 11001000 +// P1 = IOSP_CMD_SET_XOFF_CHAR +// P2 = 0x13 + + +// +// IOSP_CMD_RX_CHECK_REQ +// +// This command is used to assist in the implementation of the +// IOCTL_SERIAL_PURGE Windows IOCTL. +// This IOSP command tries to place a marker at the end of the RX +// queue in the Edgeport. If the Edgeport RX queue is full then +// the Check will be discarded. +// It is up to the device driver to timeout waiting for the +// RX_CHECK_RSP. If a RX_CHECK_RSP is received, the driver is +// sure that all data has been received from the edgeport and +// may now purge any internal RX buffers. +// Note tat the sequence numbers may be used to detect lost +// CHECK_REQs. + +// Example for Port 0 +// P0 = 11001000 +// P1 = IOSP_CMD_RX_CHECK_REQ +// P2 = Sequence number + + +// Response will be: +// P1 = IOSP_EXT_RX_CHECK_RSP +// P2 = Request Sequence number + + + +//-------------------------------------------------------------- +// +// Define values for status and status parameters +// (received by Host from Edgeport) +// +// 1ssssPPP P1P1P1P1 [ P2P2P2P2P2 ]... +// +// ssss: 00-07 2-byte status. ssss identifies which UART register +// has changed value, and the new value is in P1. +// Note that the ssss values do not correspond to the +// 16554 register numbers given in 16554.H. Instead, +// see below for definitions of the ssss numbers +// used in this status message. +// +// 08-0B 3-byte status: ==== P1 ==== ==== P2 ==== +// 08 LSR_DATA: New LSR Errored byte +// 09 1-param responses Response Code Param +// 0A OPEN_RSP: InitialMsr TxBufferSize +// 0B available for expansion +// +// 0C-0D 4-byte status. P1 = extended status code and P2,P3 = params +// Not currently implemented. +// +// 0E-0F N-byte status: P1 = num bytes after P1 (ie, TotalLen - 2) +// P2 = extended status, P3..Pn = parameters. +// Not currently implemented. +// + +/**************************************************** + * SSSS values for 2-byte status messages (0-8) + ****************************************************/ + +#define IOSP_STATUS_LSR 0x00 // P1 is new value of LSR register. + +// Bits defined in 16554.H. Edgeport +// returns this in order to report +// line status errors (overrun, +// parity, framing, break). This form +// is used when a errored receive data +// character was NOT present in the +// UART when the LSR error occurred +// (ie, when LSR bit 0 = 0). + +#define IOSP_STATUS_MSR 0x01 // P1 is new value of MSR register. + +// Bits defined in 16554.H. Edgeport +// returns this in order to report +// changes in modem status lines +// (CTS, DSR, RI, CD) +// + +// 0x02 // Available for future expansion +// 0x03 // +// 0x04 // +// 0x05 // +// 0x06 // +// 0x07 // + + +/**************************************************** + * SSSS values for 3-byte status messages (8-A) + ****************************************************/ + +#define IOSP_STATUS_LSR_DATA 0x08 // P1 is new value of LSR register (same as STATUS_LSR) + +// P2 is errored character read from +// RxFIFO after LSR reported an error. + +#define IOSP_EXT_STATUS 0x09 // P1 is status/response code, param in P2. + + +// Response Codes (P1 values) for 3-byte status messages + +#define IOSP_EXT_STATUS_CHASE_RSP 0 // Reply to CHASE_PORT cmd. P2 is outcome: +#define IOSP_EXT_STATUS_CHASE_PASS 0 // P2 = 0: All Tx data drained successfully +#define IOSP_EXT_STATUS_CHASE_FAIL 1 // P2 = 1: Timed out (stuck due to flow + +// control from remote device). + +#define IOSP_EXT_STATUS_RX_CHECK_RSP 1 // Reply to RX_CHECK cmd. P2 is sequence number + + +#define IOSP_STATUS_OPEN_RSP 0x0A // Reply to OPEN_PORT cmd. + +// P1 is Initial MSR value +// P2 is encoded TxBuffer Size: +// TxBufferSize = (P2 + 1) * 64 + +// 0x0B // Available for future expansion + +#define GET_TX_BUFFER_SIZE(P2) (((P2) + 1) * 64) + + + + +/**************************************************** + * SSSS values for 4-byte status messages + ****************************************************/ + +#define IOSP_EXT4_STATUS 0x0C // Extended status code in P1, + +// Params in P2, P3 +// Currently unimplemented. + +// 0x0D // Currently unused, available. + + + +// +// Macros to parse status messages +// + +#define IOSP_GET_STATUS_LEN(code) ((code) < 8 ? 2 : ((code) < 0x0A ? 3 : 4)) + +#define IOSP_STATUS_IS_2BYTE(code) ((code) < 0x08) +#define IOSP_STATUS_IS_3BYTE(code) (((code) >= 0x08) && ((code) <= 0x0B)) +#define IOSP_STATUS_IS_4BYTE(code) (((code) >= 0x0C) && ((code) <= 0x0D)) + diff --git a/kernel/drivers/usb/serial/io_tables.h b/kernel/drivers/usb/serial/io_tables.h new file mode 100644 index 000000000..ae5fac565 --- /dev/null +++ b/kernel/drivers/usb/serial/io_tables.h @@ -0,0 +1,232 @@ +/* + * IO Edgeport Driver tables + * + * Copyright (C) 2001 + * Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef IO_TABLES_H +#define IO_TABLES_H + +static const struct usb_device_id edgeport_2port_id_table[] = { + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_421) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_21) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2_DIN) }, + { } +}; + +static const struct usb_device_id edgeport_4port_id_table[] = { + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_RAPIDPORT_4) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4T) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_MT4X56USB) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4_DIN) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_22I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_4) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_COMPATIBLE) }, + { } +}; + +static const struct usb_device_id edgeport_8port_id_table[] = { + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8R) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8RR) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_8) }, + { } +}; + +static const struct usb_device_id Epic_port_id_table[] = { + { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) }, + { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) }, + { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) }, + { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0311) }, + { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0312) }, + { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A758) }, + { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A794) }, + { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A225) }, + { } +}; + +/* Devices that this driver supports */ +static const struct usb_device_id id_table_combined[] = { + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_RAPIDPORT_4) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4T) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_MT4X56USB) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_421) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_21) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2_DIN) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4_DIN) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_22I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_4) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_COMPATIBLE) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8R) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8RR) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_8) }, + { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) }, + { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) }, + { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) }, + { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0311) }, + { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0312) }, + { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A758) }, + { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A794) }, + { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A225) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table_combined); + +static struct usb_serial_driver edgeport_2port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "edgeport_2", + }, + .description = "Edgeport 2 port adapter", + .id_table = edgeport_2port_id_table, + .num_ports = 2, + .open = edge_open, + .close = edge_close, + .throttle = edge_throttle, + .unthrottle = edge_unthrottle, + .attach = edge_startup, + .disconnect = edge_disconnect, + .release = edge_release, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, + .ioctl = edge_ioctl, + .set_termios = edge_set_termios, + .tiocmget = edge_tiocmget, + .tiocmset = edge_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, + .write = edge_write, + .write_room = edge_write_room, + .chars_in_buffer = edge_chars_in_buffer, + .break_ctl = edge_break, + .read_int_callback = edge_interrupt_callback, + .read_bulk_callback = edge_bulk_in_callback, + .write_bulk_callback = edge_bulk_out_data_callback, +}; + +static struct usb_serial_driver edgeport_4port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "edgeport_4", + }, + .description = "Edgeport 4 port adapter", + .id_table = edgeport_4port_id_table, + .num_ports = 4, + .open = edge_open, + .close = edge_close, + .throttle = edge_throttle, + .unthrottle = edge_unthrottle, + .attach = edge_startup, + .disconnect = edge_disconnect, + .release = edge_release, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, + .ioctl = edge_ioctl, + .set_termios = edge_set_termios, + .tiocmget = edge_tiocmget, + .tiocmset = edge_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, + .write = edge_write, + .write_room = edge_write_room, + .chars_in_buffer = edge_chars_in_buffer, + .break_ctl = edge_break, + .read_int_callback = edge_interrupt_callback, + .read_bulk_callback = edge_bulk_in_callback, + .write_bulk_callback = edge_bulk_out_data_callback, +}; + +static struct usb_serial_driver edgeport_8port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "edgeport_8", + }, + .description = "Edgeport 8 port adapter", + .id_table = edgeport_8port_id_table, + .num_ports = 8, + .open = edge_open, + .close = edge_close, + .throttle = edge_throttle, + .unthrottle = edge_unthrottle, + .attach = edge_startup, + .disconnect = edge_disconnect, + .release = edge_release, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, + .ioctl = edge_ioctl, + .set_termios = edge_set_termios, + .tiocmget = edge_tiocmget, + .tiocmset = edge_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, + .write = edge_write, + .write_room = edge_write_room, + .chars_in_buffer = edge_chars_in_buffer, + .break_ctl = edge_break, + .read_int_callback = edge_interrupt_callback, + .read_bulk_callback = edge_bulk_in_callback, + .write_bulk_callback = edge_bulk_out_data_callback, +}; + +static struct usb_serial_driver epic_device = { + .driver = { + .owner = THIS_MODULE, + .name = "epic", + }, + .description = "EPiC device", + .id_table = Epic_port_id_table, + .num_ports = 1, + .open = edge_open, + .close = edge_close, + .throttle = edge_throttle, + .unthrottle = edge_unthrottle, + .attach = edge_startup, + .disconnect = edge_disconnect, + .release = edge_release, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, + .ioctl = edge_ioctl, + .set_termios = edge_set_termios, + .tiocmget = edge_tiocmget, + .tiocmset = edge_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, + .write = edge_write, + .write_room = edge_write_room, + .chars_in_buffer = edge_chars_in_buffer, + .break_ctl = edge_break, + .read_int_callback = edge_interrupt_callback, + .read_bulk_callback = edge_bulk_in_callback, + .write_bulk_callback = edge_bulk_out_data_callback, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &edgeport_2port_device, &edgeport_4port_device, + &edgeport_8port_device, &epic_device, NULL +}; + +#endif + diff --git a/kernel/drivers/usb/serial/io_ti.c b/kernel/drivers/usb/serial/io_ti.c new file mode 100644 index 000000000..ddbb8fe10 --- /dev/null +++ b/kernel/drivers/usb/serial/io_ti.c @@ -0,0 +1,2595 @@ +/* + * Edgeport USB Serial Converter driver + * + * Copyright (C) 2000-2002 Inside Out Networks, All rights reserved. + * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Supports the following devices: + * EP/1 EP/2 EP/4 EP/21 EP/22 EP/221 EP/42 EP/421 WATCHPORT + * + * For questions or problems with this driver, contact Inside Out + * Networks technical support, or Peter Berger <pberger@brimson.com>, + * or Al Borchers <alborchers@steinerpoint.com>. + */ + +#include <linux/kernel.h> +#include <linux/jiffies.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/mutex.h> +#include <linux/serial.h> +#include <linux/swab.h> +#include <linux/kfifo.h> +#include <linux/ioctl.h> +#include <linux/firmware.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +#include "io_16654.h" +#include "io_usbvend.h" +#include "io_ti.h" + +#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com> and David Iacovelli" +#define DRIVER_DESC "Edgeport USB Serial Driver" + +#define EPROM_PAGE_SIZE 64 + + +/* different hardware types */ +#define HARDWARE_TYPE_930 0 +#define HARDWARE_TYPE_TIUMP 1 + +/* IOCTL_PRIVATE_TI_GET_MODE Definitions */ +#define TI_MODE_CONFIGURING 0 /* Device has not entered start device */ +#define TI_MODE_BOOT 1 /* Staying in boot mode */ +#define TI_MODE_DOWNLOAD 2 /* Made it to download mode */ +#define TI_MODE_TRANSITIONING 3 /* Currently in boot mode but + transitioning to download mode */ + +/* read urb state */ +#define EDGE_READ_URB_RUNNING 0 +#define EDGE_READ_URB_STOPPING 1 +#define EDGE_READ_URB_STOPPED 2 + +#define EDGE_CLOSING_WAIT 4000 /* in .01 sec */ + + +/* Product information read from the Edgeport */ +struct product_info { + int TiMode; /* Current TI Mode */ + __u8 hardware_type; /* Type of hardware */ +} __attribute__((packed)); + +struct edgeport_port { + __u16 uart_base; + __u16 dma_address; + __u8 shadow_msr; + __u8 shadow_mcr; + __u8 shadow_lsr; + __u8 lsr_mask; + __u32 ump_read_timeout; /* Number of milliseconds the UMP will + wait without data before completing + a read short */ + int baud_rate; + int close_pending; + int lsr_event; + + struct edgeport_serial *edge_serial; + struct usb_serial_port *port; + __u8 bUartMode; /* Port type, 0: RS232, etc. */ + spinlock_t ep_lock; + int ep_read_urb_state; + int ep_write_urb_in_use; +}; + +struct edgeport_serial { + struct product_info product_info; + u8 TI_I2C_Type; /* Type of I2C in UMP */ + u8 TiReadI2C; /* Set to TRUE if we have read the + I2c in Boot Mode */ + struct mutex es_lock; + int num_ports_open; + struct usb_serial *serial; +}; + + +/* Devices that this driver supports */ +static const struct usb_device_id edgeport_1port_id_table[] = { + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROXIMITY) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOTION) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOISTURE) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_TEMPERATURE) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_HUMIDITY) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_POWER) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_LIGHT) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_RADIATION) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_DISTANCE) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_ACCELERATION) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROX_DIST) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_HP4CD) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_PCI) }, + { } +}; + +static const struct usb_device_id edgeport_2port_id_table[] = { + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2C) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_421) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_42) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_221C) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22C) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21C) }, + /* The 4, 8 and 16 port devices show up as multiple 2 port devices */ + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4S) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8S) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416B) }, + { } +}; + +/* Devices that this driver supports */ +static const struct usb_device_id id_table_combined[] = { + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_1) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROXIMITY) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOTION) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_MOISTURE) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_TEMPERATURE) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_HUMIDITY) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_POWER) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_LIGHT) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_RADIATION) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_DISTANCE) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_ACCELERATION) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_WP_PROX_DIST) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_HP4CD) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_PLUS_PWR_PCI) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2C) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_2I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_421) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_42) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22I) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_221C) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_22C) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_21C) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_4S) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_8S) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416) }, + { USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_TI_EDGEPORT_416B) }, + { } +}; + +MODULE_DEVICE_TABLE(usb, id_table_combined); + +static unsigned char OperationalMajorVersion; +static unsigned char OperationalMinorVersion; +static unsigned short OperationalBuildNumber; + +static int closing_wait = EDGE_CLOSING_WAIT; +static bool ignore_cpu_rev; +static int default_uart_mode; /* RS232 */ + +static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data, + int length); + +static void stop_read(struct edgeport_port *edge_port); +static int restart_read(struct edgeport_port *edge_port); + +static void edge_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios); +static void edge_send(struct usb_serial_port *port, struct tty_struct *tty); + +/* sysfs attributes */ +static int edge_create_sysfs_attrs(struct usb_serial_port *port); +static int edge_remove_sysfs_attrs(struct usb_serial_port *port); + + +static int ti_vread_sync(struct usb_device *dev, __u8 request, + __u16 value, __u16 index, u8 *data, int size) +{ + int status; + + status = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request, + (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN), + value, index, data, size, 1000); + if (status < 0) + return status; + if (status != size) { + dev_dbg(&dev->dev, "%s - wanted to write %d, but only wrote %d\n", + __func__, size, status); + return -ECOMM; + } + return 0; +} + +static int ti_vsend_sync(struct usb_device *dev, __u8 request, + __u16 value, __u16 index, u8 *data, int size) +{ + int status; + + status = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request, + (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT), + value, index, data, size, 1000); + if (status < 0) + return status; + if (status != size) { + dev_dbg(&dev->dev, "%s - wanted to write %d, but only wrote %d\n", + __func__, size, status); + return -ECOMM; + } + return 0; +} + +static int send_cmd(struct usb_device *dev, __u8 command, + __u8 moduleid, __u16 value, u8 *data, + int size) +{ + return ti_vsend_sync(dev, command, value, moduleid, data, size); +} + +/* clear tx/rx buffers and fifo in TI UMP */ +static int purge_port(struct usb_serial_port *port, __u16 mask) +{ + int port_number = port->port_number; + + dev_dbg(&port->dev, "%s - port %d, mask %x\n", __func__, port_number, mask); + + return send_cmd(port->serial->dev, + UMPC_PURGE_PORT, + (__u8)(UMPM_UART1_PORT + port_number), + mask, + NULL, + 0); +} + +/** + * read_download_mem - Read edgeport memory from TI chip + * @dev: usb device pointer + * @start_address: Device CPU address at which to read + * @length: Length of above data + * @address_type: Can read both XDATA and I2C + * @buffer: pointer to input data buffer + */ +static int read_download_mem(struct usb_device *dev, int start_address, + int length, __u8 address_type, __u8 *buffer) +{ + int status = 0; + __u8 read_length; + u16 be_start_address; + + dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, length); + + /* Read in blocks of 64 bytes + * (TI firmware can't handle more than 64 byte reads) + */ + while (length) { + if (length > 64) + read_length = 64; + else + read_length = (__u8)length; + + if (read_length > 1) { + dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, read_length); + } + /* + * NOTE: Must use swab as wIndex is sent in little-endian + * byte order regardless of host byte order. + */ + be_start_address = swab16((u16)start_address); + status = ti_vread_sync(dev, UMPC_MEMORY_READ, + (__u16)address_type, + be_start_address, + buffer, read_length); + + if (status) { + dev_dbg(&dev->dev, "%s - ERROR %x\n", __func__, status); + return status; + } + + if (read_length > 1) + usb_serial_debug_data(&dev->dev, __func__, read_length, buffer); + + /* Update pointers/length */ + start_address += read_length; + buffer += read_length; + length -= read_length; + } + + return status; +} + +static int read_ram(struct usb_device *dev, int start_address, + int length, __u8 *buffer) +{ + return read_download_mem(dev, start_address, length, + DTK_ADDR_SPACE_XDATA, buffer); +} + +/* Read edgeport memory to a given block */ +static int read_boot_mem(struct edgeport_serial *serial, + int start_address, int length, __u8 *buffer) +{ + int status = 0; + int i; + + for (i = 0; i < length; i++) { + status = ti_vread_sync(serial->serial->dev, + UMPC_MEMORY_READ, serial->TI_I2C_Type, + (__u16)(start_address+i), &buffer[i], 0x01); + if (status) { + dev_dbg(&serial->serial->dev->dev, "%s - ERROR %x\n", __func__, status); + return status; + } + } + + dev_dbg(&serial->serial->dev->dev, "%s - start_address = %x, length = %d\n", + __func__, start_address, length); + usb_serial_debug_data(&serial->serial->dev->dev, __func__, length, buffer); + + serial->TiReadI2C = 1; + + return status; +} + +/* Write given block to TI EPROM memory */ +static int write_boot_mem(struct edgeport_serial *serial, + int start_address, int length, __u8 *buffer) +{ + int status = 0; + int i; + u8 *temp; + + /* Must do a read before write */ + if (!serial->TiReadI2C) { + temp = kmalloc(1, GFP_KERNEL); + if (!temp) + return -ENOMEM; + + status = read_boot_mem(serial, 0, 1, temp); + kfree(temp); + if (status) + return status; + } + + for (i = 0; i < length; ++i) { + status = ti_vsend_sync(serial->serial->dev, + UMPC_MEMORY_WRITE, buffer[i], + (__u16)(i + start_address), NULL, 0); + if (status) + return status; + } + + dev_dbg(&serial->serial->dev->dev, "%s - start_sddr = %x, length = %d\n", __func__, start_address, length); + usb_serial_debug_data(&serial->serial->dev->dev, __func__, length, buffer); + + return status; +} + + +/* Write edgeport I2C memory to TI chip */ +static int write_i2c_mem(struct edgeport_serial *serial, + int start_address, int length, __u8 address_type, __u8 *buffer) +{ + struct device *dev = &serial->serial->dev->dev; + int status = 0; + int write_length; + u16 be_start_address; + + /* We can only send a maximum of 1 aligned byte page at a time */ + + /* calculate the number of bytes left in the first page */ + write_length = EPROM_PAGE_SIZE - + (start_address & (EPROM_PAGE_SIZE - 1)); + + if (write_length > length) + write_length = length; + + dev_dbg(dev, "%s - BytesInFirstPage Addr = %x, length = %d\n", + __func__, start_address, write_length); + usb_serial_debug_data(dev, __func__, write_length, buffer); + + /* + * Write first page. + * + * NOTE: Must use swab as wIndex is sent in little-endian byte order + * regardless of host byte order. + */ + be_start_address = swab16((u16)start_address); + status = ti_vsend_sync(serial->serial->dev, + UMPC_MEMORY_WRITE, (__u16)address_type, + be_start_address, + buffer, write_length); + if (status) { + dev_dbg(dev, "%s - ERROR %d\n", __func__, status); + return status; + } + + length -= write_length; + start_address += write_length; + buffer += write_length; + + /* We should be aligned now -- can write + max page size bytes at a time */ + while (length) { + if (length > EPROM_PAGE_SIZE) + write_length = EPROM_PAGE_SIZE; + else + write_length = length; + + dev_dbg(dev, "%s - Page Write Addr = %x, length = %d\n", + __func__, start_address, write_length); + usb_serial_debug_data(dev, __func__, write_length, buffer); + + /* + * Write next page. + * + * NOTE: Must use swab as wIndex is sent in little-endian byte + * order regardless of host byte order. + */ + be_start_address = swab16((u16)start_address); + status = ti_vsend_sync(serial->serial->dev, UMPC_MEMORY_WRITE, + (__u16)address_type, + be_start_address, + buffer, write_length); + if (status) { + dev_err(dev, "%s - ERROR %d\n", __func__, status); + return status; + } + + length -= write_length; + start_address += write_length; + buffer += write_length; + } + return status; +} + +/* Examine the UMP DMA registers and LSR + * + * Check the MSBit of the X and Y DMA byte count registers. + * A zero in this bit indicates that the TX DMA buffers are empty + * then check the TX Empty bit in the UART. + */ +static int tx_active(struct edgeport_port *port) +{ + int status; + struct out_endpoint_desc_block *oedb; + __u8 *lsr; + int bytes_left = 0; + + oedb = kmalloc(sizeof(*oedb), GFP_KERNEL); + if (!oedb) + return -ENOMEM; + + lsr = kmalloc(1, GFP_KERNEL); /* Sigh, that's right, just one byte, + as not all platforms can do DMA + from stack */ + if (!lsr) { + kfree(oedb); + return -ENOMEM; + } + /* Read the DMA Count Registers */ + status = read_ram(port->port->serial->dev, port->dma_address, + sizeof(*oedb), (void *)oedb); + if (status) + goto exit_is_tx_active; + + dev_dbg(&port->port->dev, "%s - XByteCount 0x%X\n", __func__, oedb->XByteCount); + + /* and the LSR */ + status = read_ram(port->port->serial->dev, + port->uart_base + UMPMEM_OFFS_UART_LSR, 1, lsr); + + if (status) + goto exit_is_tx_active; + dev_dbg(&port->port->dev, "%s - LSR = 0x%X\n", __func__, *lsr); + + /* If either buffer has data or we are transmitting then return TRUE */ + if ((oedb->XByteCount & 0x80) != 0) + bytes_left += 64; + + if ((*lsr & UMP_UART_LSR_TX_MASK) == 0) + bytes_left += 1; + + /* We return Not Active if we get any kind of error */ +exit_is_tx_active: + dev_dbg(&port->port->dev, "%s - return %d\n", __func__, bytes_left); + + kfree(lsr); + kfree(oedb); + return bytes_left; +} + +static int choose_config(struct usb_device *dev) +{ + /* + * There may be multiple configurations on this device, in which case + * we would need to read and parse all of them to find out which one + * we want. However, we just support one config at this point, + * configuration # 1, which is Config Descriptor 0. + */ + + dev_dbg(&dev->dev, "%s - Number of Interfaces = %d\n", + __func__, dev->config->desc.bNumInterfaces); + dev_dbg(&dev->dev, "%s - MAX Power = %d\n", + __func__, dev->config->desc.bMaxPower * 2); + + if (dev->config->desc.bNumInterfaces != 1) { + dev_err(&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", __func__); + return -ENODEV; + } + + return 0; +} + +static int read_rom(struct edgeport_serial *serial, + int start_address, int length, __u8 *buffer) +{ + int status; + + if (serial->product_info.TiMode == TI_MODE_DOWNLOAD) { + status = read_download_mem(serial->serial->dev, + start_address, + length, + serial->TI_I2C_Type, + buffer); + } else { + status = read_boot_mem(serial, start_address, length, + buffer); + } + return status; +} + +static int write_rom(struct edgeport_serial *serial, int start_address, + int length, __u8 *buffer) +{ + if (serial->product_info.TiMode == TI_MODE_BOOT) + return write_boot_mem(serial, start_address, length, + buffer); + + if (serial->product_info.TiMode == TI_MODE_DOWNLOAD) + return write_i2c_mem(serial, start_address, length, + serial->TI_I2C_Type, buffer); + return -EINVAL; +} + + + +/* Read a descriptor header from I2C based on type */ +static int get_descriptor_addr(struct edgeport_serial *serial, + int desc_type, struct ti_i2c_desc *rom_desc) +{ + int start_address; + int status; + + /* Search for requested descriptor in I2C */ + start_address = 2; + do { + status = read_rom(serial, + start_address, + sizeof(struct ti_i2c_desc), + (__u8 *)rom_desc); + if (status) + return 0; + + if (rom_desc->Type == desc_type) + return start_address; + + start_address = start_address + sizeof(struct ti_i2c_desc) + + le16_to_cpu(rom_desc->Size); + + } while ((start_address < TI_MAX_I2C_SIZE) && rom_desc->Type); + + return 0; +} + +/* Validate descriptor checksum */ +static int valid_csum(struct ti_i2c_desc *rom_desc, __u8 *buffer) +{ + __u16 i; + __u8 cs = 0; + + for (i = 0; i < le16_to_cpu(rom_desc->Size); i++) + cs = (__u8)(cs + buffer[i]); + + if (cs != rom_desc->CheckSum) { + pr_debug("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs); + return -EINVAL; + } + return 0; +} + +/* Make sure that the I2C image is good */ +static int check_i2c_image(struct edgeport_serial *serial) +{ + struct device *dev = &serial->serial->dev->dev; + int status = 0; + struct ti_i2c_desc *rom_desc; + int start_address = 2; + __u8 *buffer; + __u16 ttype; + + rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL); + if (!rom_desc) + return -ENOMEM; + + buffer = kmalloc(TI_MAX_I2C_SIZE, GFP_KERNEL); + if (!buffer) { + kfree(rom_desc); + return -ENOMEM; + } + + /* Read the first byte (Signature0) must be 0x52 or 0x10 */ + status = read_rom(serial, 0, 1, buffer); + if (status) + goto out; + + if (*buffer != UMP5152 && *buffer != UMP3410) { + dev_err(dev, "%s - invalid buffer signature\n", __func__); + status = -ENODEV; + goto out; + } + + do { + /* Validate the I2C */ + status = read_rom(serial, + start_address, + sizeof(struct ti_i2c_desc), + (__u8 *)rom_desc); + if (status) + break; + + if ((start_address + sizeof(struct ti_i2c_desc) + + le16_to_cpu(rom_desc->Size)) > TI_MAX_I2C_SIZE) { + status = -ENODEV; + dev_dbg(dev, "%s - structure too big, erroring out.\n", __func__); + break; + } + + dev_dbg(dev, "%s Type = 0x%x\n", __func__, rom_desc->Type); + + /* Skip type 2 record */ + ttype = rom_desc->Type & 0x0f; + if (ttype != I2C_DESC_TYPE_FIRMWARE_BASIC + && ttype != I2C_DESC_TYPE_FIRMWARE_AUTO) { + /* Read the descriptor data */ + status = read_rom(serial, start_address + + sizeof(struct ti_i2c_desc), + le16_to_cpu(rom_desc->Size), + buffer); + if (status) + break; + + status = valid_csum(rom_desc, buffer); + if (status) + break; + } + start_address = start_address + sizeof(struct ti_i2c_desc) + + le16_to_cpu(rom_desc->Size); + + } while ((rom_desc->Type != I2C_DESC_TYPE_ION) && + (start_address < TI_MAX_I2C_SIZE)); + + if ((rom_desc->Type != I2C_DESC_TYPE_ION) || + (start_address > TI_MAX_I2C_SIZE)) + status = -ENODEV; + +out: + kfree(buffer); + kfree(rom_desc); + return status; +} + +static int get_manuf_info(struct edgeport_serial *serial, __u8 *buffer) +{ + int status; + int start_address; + struct ti_i2c_desc *rom_desc; + struct edge_ti_manuf_descriptor *desc; + struct device *dev = &serial->serial->dev->dev; + + rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL); + if (!rom_desc) + return -ENOMEM; + + start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_ION, + rom_desc); + + if (!start_address) { + dev_dbg(dev, "%s - Edge Descriptor not found in I2C\n", __func__); + status = -ENODEV; + goto exit; + } + + /* Read the descriptor data */ + status = read_rom(serial, start_address+sizeof(struct ti_i2c_desc), + le16_to_cpu(rom_desc->Size), buffer); + if (status) + goto exit; + + status = valid_csum(rom_desc, buffer); + + desc = (struct edge_ti_manuf_descriptor *)buffer; + dev_dbg(dev, "%s - IonConfig 0x%x\n", __func__, desc->IonConfig); + dev_dbg(dev, "%s - Version %d\n", __func__, desc->Version); + dev_dbg(dev, "%s - Cpu/Board 0x%x\n", __func__, desc->CpuRev_BoardRev); + dev_dbg(dev, "%s - NumPorts %d\n", __func__, desc->NumPorts); + dev_dbg(dev, "%s - NumVirtualPorts %d\n", __func__, desc->NumVirtualPorts); + dev_dbg(dev, "%s - TotalPorts %d\n", __func__, desc->TotalPorts); + +exit: + kfree(rom_desc); + return status; +} + +/* Build firmware header used for firmware update */ +static int build_i2c_fw_hdr(__u8 *header, struct device *dev) +{ + __u8 *buffer; + int buffer_size; + int i; + int err; + __u8 cs = 0; + struct ti_i2c_desc *i2c_header; + struct ti_i2c_image_header *img_header; + struct ti_i2c_firmware_rec *firmware_rec; + const struct firmware *fw; + const char *fw_name = "edgeport/down3.bin"; + + /* In order to update the I2C firmware we must change the type 2 record + * to type 0xF2. This will force the UMP to come up in Boot Mode. + * Then while in boot mode, the driver will download the latest + * firmware (padded to 15.5k) into the UMP ram. And finally when the + * device comes back up in download mode the driver will cause the new + * firmware to be copied from the UMP Ram to I2C and the firmware will + * update the record type from 0xf2 to 0x02. + */ + + /* Allocate a 15.5k buffer + 2 bytes for version number + * (Firmware Record) */ + buffer_size = (((1024 * 16) - 512 ) + + sizeof(struct ti_i2c_firmware_rec)); + + buffer = kmalloc(buffer_size, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + // Set entire image of 0xffs + memset(buffer, 0xff, buffer_size); + + err = request_firmware(&fw, fw_name, dev); + if (err) { + dev_err(dev, "Failed to load image \"%s\" err %d\n", + fw_name, err); + kfree(buffer); + return err; + } + + /* Save Download Version Number */ + OperationalMajorVersion = fw->data[0]; + OperationalMinorVersion = fw->data[1]; + OperationalBuildNumber = fw->data[2] | (fw->data[3] << 8); + + /* Copy version number into firmware record */ + firmware_rec = (struct ti_i2c_firmware_rec *)buffer; + + firmware_rec->Ver_Major = OperationalMajorVersion; + firmware_rec->Ver_Minor = OperationalMinorVersion; + + /* Pointer to fw_down memory image */ + img_header = (struct ti_i2c_image_header *)&fw->data[4]; + + memcpy(buffer + sizeof(struct ti_i2c_firmware_rec), + &fw->data[4 + sizeof(struct ti_i2c_image_header)], + le16_to_cpu(img_header->Length)); + + release_firmware(fw); + + for (i=0; i < buffer_size; i++) { + cs = (__u8)(cs + buffer[i]); + } + + kfree(buffer); + + /* Build new header */ + i2c_header = (struct ti_i2c_desc *)header; + firmware_rec = (struct ti_i2c_firmware_rec*)i2c_header->Data; + + i2c_header->Type = I2C_DESC_TYPE_FIRMWARE_BLANK; + i2c_header->Size = cpu_to_le16(buffer_size); + i2c_header->CheckSum = cs; + firmware_rec->Ver_Major = OperationalMajorVersion; + firmware_rec->Ver_Minor = OperationalMinorVersion; + + return 0; +} + +/* Try to figure out what type of I2c we have */ +static int i2c_type_bootmode(struct edgeport_serial *serial) +{ + struct device *dev = &serial->serial->dev->dev; + int status; + u8 *data; + + data = kmalloc(1, GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* Try to read type 2 */ + status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ, + DTK_ADDR_SPACE_I2C_TYPE_II, 0, data, 0x01); + if (status) + dev_dbg(dev, "%s - read 2 status error = %d\n", __func__, status); + else + dev_dbg(dev, "%s - read 2 data = 0x%x\n", __func__, *data); + if ((!status) && (*data == UMP5152 || *data == UMP3410)) { + dev_dbg(dev, "%s - ROM_TYPE_II\n", __func__); + serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; + goto out; + } + + /* Try to read type 3 */ + status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ, + DTK_ADDR_SPACE_I2C_TYPE_III, 0, data, 0x01); + if (status) + dev_dbg(dev, "%s - read 3 status error = %d\n", __func__, status); + else + dev_dbg(dev, "%s - read 2 data = 0x%x\n", __func__, *data); + if ((!status) && (*data == UMP5152 || *data == UMP3410)) { + dev_dbg(dev, "%s - ROM_TYPE_III\n", __func__); + serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_III; + goto out; + } + + dev_dbg(dev, "%s - Unknown\n", __func__); + serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; + status = -ENODEV; +out: + kfree(data); + return status; +} + +static int bulk_xfer(struct usb_serial *serial, void *buffer, + int length, int *num_sent) +{ + int status; + + status = usb_bulk_msg(serial->dev, + usb_sndbulkpipe(serial->dev, + serial->port[0]->bulk_out_endpointAddress), + buffer, length, num_sent, 1000); + return status; +} + +/* Download given firmware image to the device (IN BOOT MODE) */ +static int download_code(struct edgeport_serial *serial, __u8 *image, + int image_length) +{ + int status = 0; + int pos; + int transfer; + int done; + + /* Transfer firmware image */ + for (pos = 0; pos < image_length; ) { + /* Read the next buffer from file */ + transfer = image_length - pos; + if (transfer > EDGE_FW_BULK_MAX_PACKET_SIZE) + transfer = EDGE_FW_BULK_MAX_PACKET_SIZE; + + /* Transfer data */ + status = bulk_xfer(serial->serial, &image[pos], + transfer, &done); + if (status) + break; + /* Advance buffer pointer */ + pos += done; + } + + return status; +} + +/* FIXME!!! */ +static int config_boot_dev(struct usb_device *dev) +{ + return 0; +} + +static int ti_cpu_rev(struct edge_ti_manuf_descriptor *desc) +{ + return TI_GET_CPU_REVISION(desc->CpuRev_BoardRev); +} + +/** + * DownloadTIFirmware - Download run-time operating firmware to the TI5052 + * + * This routine downloads the main operating code into the TI5052, using the + * boot code already burned into E2PROM or ROM. + */ +static int download_fw(struct edgeport_serial *serial) +{ + struct device *dev = &serial->serial->dev->dev; + int status = 0; + int start_address; + struct edge_ti_manuf_descriptor *ti_manuf_desc; + struct usb_interface_descriptor *interface; + int download_cur_ver; + int download_new_ver; + + /* This routine is entered by both the BOOT mode and the Download mode + * We can determine which code is running by the reading the config + * descriptor and if we have only one bulk pipe it is in boot mode + */ + serial->product_info.hardware_type = HARDWARE_TYPE_TIUMP; + + /* Default to type 2 i2c */ + serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; + + status = choose_config(serial->serial->dev); + if (status) + return status; + + interface = &serial->serial->interface->cur_altsetting->desc; + if (!interface) { + dev_err(dev, "%s - no interface set, error!\n", __func__); + return -ENODEV; + } + + /* + * Setup initial mode -- the default mode 0 is TI_MODE_CONFIGURING + * if we have more than one endpoint we are definitely in download + * mode + */ + if (interface->bNumEndpoints > 1) + serial->product_info.TiMode = TI_MODE_DOWNLOAD; + else + /* Otherwise we will remain in configuring mode */ + serial->product_info.TiMode = TI_MODE_CONFIGURING; + + /********************************************************************/ + /* Download Mode */ + /********************************************************************/ + if (serial->product_info.TiMode == TI_MODE_DOWNLOAD) { + struct ti_i2c_desc *rom_desc; + + dev_dbg(dev, "%s - RUNNING IN DOWNLOAD MODE\n", __func__); + + status = check_i2c_image(serial); + if (status) { + dev_dbg(dev, "%s - DOWNLOAD MODE -- BAD I2C\n", __func__); + return status; + } + + /* Validate Hardware version number + * Read Manufacturing Descriptor from TI Based Edgeport + */ + ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL); + if (!ti_manuf_desc) + return -ENOMEM; + + status = get_manuf_info(serial, (__u8 *)ti_manuf_desc); + if (status) { + kfree(ti_manuf_desc); + return status; + } + + /* Check version number of ION descriptor */ + if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) { + dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n", + __func__, ti_cpu_rev(ti_manuf_desc)); + kfree(ti_manuf_desc); + return -EINVAL; + } + + rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL); + if (!rom_desc) { + kfree(ti_manuf_desc); + return -ENOMEM; + } + + /* Search for type 2 record (firmware record) */ + start_address = get_descriptor_addr(serial, + I2C_DESC_TYPE_FIRMWARE_BASIC, rom_desc); + if (start_address != 0) { + struct ti_i2c_firmware_rec *firmware_version; + u8 *record; + + dev_dbg(dev, "%s - Found Type FIRMWARE (Type 2) record\n", __func__); + + firmware_version = kmalloc(sizeof(*firmware_version), + GFP_KERNEL); + if (!firmware_version) { + kfree(rom_desc); + kfree(ti_manuf_desc); + return -ENOMEM; + } + + /* Validate version number + * Read the descriptor data + */ + status = read_rom(serial, start_address + + sizeof(struct ti_i2c_desc), + sizeof(struct ti_i2c_firmware_rec), + (__u8 *)firmware_version); + if (status) { + kfree(firmware_version); + kfree(rom_desc); + kfree(ti_manuf_desc); + return status; + } + + /* Check version number of download with current + version in I2c */ + download_cur_ver = (firmware_version->Ver_Major << 8) + + (firmware_version->Ver_Minor); + download_new_ver = (OperationalMajorVersion << 8) + + (OperationalMinorVersion); + + dev_dbg(dev, "%s - >> FW Versions Device %d.%d Driver %d.%d\n", + __func__, firmware_version->Ver_Major, + firmware_version->Ver_Minor, + OperationalMajorVersion, + OperationalMinorVersion); + + /* Check if we have an old version in the I2C and + update if necessary */ + if (download_cur_ver < download_new_ver) { + dev_dbg(dev, "%s - Update I2C dld from %d.%d to %d.%d\n", + __func__, + firmware_version->Ver_Major, + firmware_version->Ver_Minor, + OperationalMajorVersion, + OperationalMinorVersion); + + record = kmalloc(1, GFP_KERNEL); + if (!record) { + kfree(firmware_version); + kfree(rom_desc); + kfree(ti_manuf_desc); + return -ENOMEM; + } + /* In order to update the I2C firmware we must + * change the type 2 record to type 0xF2. This + * will force the UMP to come up in Boot Mode. + * Then while in boot mode, the driver will + * download the latest firmware (padded to + * 15.5k) into the UMP ram. Finally when the + * device comes back up in download mode the + * driver will cause the new firmware to be + * copied from the UMP Ram to I2C and the + * firmware will update the record type from + * 0xf2 to 0x02. + */ + *record = I2C_DESC_TYPE_FIRMWARE_BLANK; + + /* Change the I2C Firmware record type to + 0xf2 to trigger an update */ + status = write_rom(serial, start_address, + sizeof(*record), record); + if (status) { + kfree(record); + kfree(firmware_version); + kfree(rom_desc); + kfree(ti_manuf_desc); + return status; + } + + /* verify the write -- must do this in order + * for write to complete before we do the + * hardware reset + */ + status = read_rom(serial, + start_address, + sizeof(*record), + record); + if (status) { + kfree(record); + kfree(firmware_version); + kfree(rom_desc); + kfree(ti_manuf_desc); + return status; + } + + if (*record != I2C_DESC_TYPE_FIRMWARE_BLANK) { + dev_err(dev, "%s - error resetting device\n", __func__); + kfree(record); + kfree(firmware_version); + kfree(rom_desc); + kfree(ti_manuf_desc); + return -ENODEV; + } + + dev_dbg(dev, "%s - HARDWARE RESET\n", __func__); + + /* Reset UMP -- Back to BOOT MODE */ + status = ti_vsend_sync(serial->serial->dev, + UMPC_HARDWARE_RESET, + 0, 0, NULL, 0); + + dev_dbg(dev, "%s - HARDWARE RESET return %d\n", __func__, status); + + /* return an error on purpose. */ + kfree(record); + kfree(firmware_version); + kfree(rom_desc); + kfree(ti_manuf_desc); + return -ENODEV; + } + kfree(firmware_version); + } + /* Search for type 0xF2 record (firmware blank record) */ + else if ((start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_FIRMWARE_BLANK, rom_desc)) != 0) { +#define HEADER_SIZE (sizeof(struct ti_i2c_desc) + \ + sizeof(struct ti_i2c_firmware_rec)) + __u8 *header; + __u8 *vheader; + + header = kmalloc(HEADER_SIZE, GFP_KERNEL); + if (!header) { + kfree(rom_desc); + kfree(ti_manuf_desc); + return -ENOMEM; + } + + vheader = kmalloc(HEADER_SIZE, GFP_KERNEL); + if (!vheader) { + kfree(header); + kfree(rom_desc); + kfree(ti_manuf_desc); + return -ENOMEM; + } + + dev_dbg(dev, "%s - Found Type BLANK FIRMWARE (Type F2) record\n", __func__); + + /* + * In order to update the I2C firmware we must change + * the type 2 record to type 0xF2. This will force the + * UMP to come up in Boot Mode. Then while in boot + * mode, the driver will download the latest firmware + * (padded to 15.5k) into the UMP ram. Finally when the + * device comes back up in download mode the driver + * will cause the new firmware to be copied from the + * UMP Ram to I2C and the firmware will update the + * record type from 0xf2 to 0x02. + */ + status = build_i2c_fw_hdr(header, dev); + if (status) { + kfree(vheader); + kfree(header); + kfree(rom_desc); + kfree(ti_manuf_desc); + return -EINVAL; + } + + /* Update I2C with type 0xf2 record with correct + size and checksum */ + status = write_rom(serial, + start_address, + HEADER_SIZE, + header); + if (status) { + kfree(vheader); + kfree(header); + kfree(rom_desc); + kfree(ti_manuf_desc); + return -EINVAL; + } + + /* verify the write -- must do this in order for + write to complete before we do the hardware reset */ + status = read_rom(serial, start_address, + HEADER_SIZE, vheader); + + if (status) { + dev_dbg(dev, "%s - can't read header back\n", __func__); + kfree(vheader); + kfree(header); + kfree(rom_desc); + kfree(ti_manuf_desc); + return status; + } + if (memcmp(vheader, header, HEADER_SIZE)) { + dev_dbg(dev, "%s - write download record failed\n", __func__); + kfree(vheader); + kfree(header); + kfree(rom_desc); + kfree(ti_manuf_desc); + return -EINVAL; + } + + kfree(vheader); + kfree(header); + + dev_dbg(dev, "%s - Start firmware update\n", __func__); + + /* Tell firmware to copy download image into I2C */ + status = ti_vsend_sync(serial->serial->dev, + UMPC_COPY_DNLD_TO_I2C, 0, 0, NULL, 0); + + dev_dbg(dev, "%s - Update complete 0x%x\n", __func__, status); + if (status) { + dev_err(dev, + "%s - UMPC_COPY_DNLD_TO_I2C failed\n", + __func__); + kfree(rom_desc); + kfree(ti_manuf_desc); + return status; + } + } + + // The device is running the download code + kfree(rom_desc); + kfree(ti_manuf_desc); + return 0; + } + + /********************************************************************/ + /* Boot Mode */ + /********************************************************************/ + dev_dbg(dev, "%s - RUNNING IN BOOT MODE\n", __func__); + + /* Configure the TI device so we can use the BULK pipes for download */ + status = config_boot_dev(serial->serial->dev); + if (status) + return status; + + if (le16_to_cpu(serial->serial->dev->descriptor.idVendor) + != USB_VENDOR_ID_ION) { + dev_dbg(dev, "%s - VID = 0x%x\n", __func__, + le16_to_cpu(serial->serial->dev->descriptor.idVendor)); + serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; + goto stayinbootmode; + } + + /* We have an ION device (I2c Must be programmed) + Determine I2C image type */ + if (i2c_type_bootmode(serial)) + goto stayinbootmode; + + /* Check for ION Vendor ID and that the I2C is valid */ + if (!check_i2c_image(serial)) { + struct ti_i2c_image_header *header; + int i; + __u8 cs = 0; + __u8 *buffer; + int buffer_size; + int err; + const struct firmware *fw; + const char *fw_name = "edgeport/down3.bin"; + + /* Validate Hardware version number + * Read Manufacturing Descriptor from TI Based Edgeport + */ + ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL); + if (!ti_manuf_desc) + return -ENOMEM; + + status = get_manuf_info(serial, (__u8 *)ti_manuf_desc); + if (status) { + kfree(ti_manuf_desc); + goto stayinbootmode; + } + + /* Check for version 2 */ + if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) { + dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n", + __func__, ti_cpu_rev(ti_manuf_desc)); + kfree(ti_manuf_desc); + goto stayinbootmode; + } + + kfree(ti_manuf_desc); + + /* + * In order to update the I2C firmware we must change the type + * 2 record to type 0xF2. This will force the UMP to come up + * in Boot Mode. Then while in boot mode, the driver will + * download the latest firmware (padded to 15.5k) into the + * UMP ram. Finally when the device comes back up in download + * mode the driver will cause the new firmware to be copied + * from the UMP Ram to I2C and the firmware will update the + * record type from 0xf2 to 0x02. + * + * Do we really have to copy the whole firmware image, + * or could we do this in place! + */ + + /* Allocate a 15.5k buffer + 3 byte header */ + buffer_size = (((1024 * 16) - 512) + + sizeof(struct ti_i2c_image_header)); + buffer = kmalloc(buffer_size, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + /* Initialize the buffer to 0xff (pad the buffer) */ + memset(buffer, 0xff, buffer_size); + + err = request_firmware(&fw, fw_name, dev); + if (err) { + dev_err(dev, "Failed to load image \"%s\" err %d\n", + fw_name, err); + kfree(buffer); + return err; + } + memcpy(buffer, &fw->data[4], fw->size - 4); + release_firmware(fw); + + for (i = sizeof(struct ti_i2c_image_header); + i < buffer_size; i++) { + cs = (__u8)(cs + buffer[i]); + } + + header = (struct ti_i2c_image_header *)buffer; + + /* update length and checksum after padding */ + header->Length = cpu_to_le16((__u16)(buffer_size - + sizeof(struct ti_i2c_image_header))); + header->CheckSum = cs; + + /* Download the operational code */ + dev_dbg(dev, "%s - Downloading operational code image (TI UMP)\n", __func__); + status = download_code(serial, buffer, buffer_size); + + kfree(buffer); + + if (status) { + dev_dbg(dev, "%s - Error downloading operational code image\n", __func__); + return status; + } + + /* Device will reboot */ + serial->product_info.TiMode = TI_MODE_TRANSITIONING; + + dev_dbg(dev, "%s - Download successful -- Device rebooting...\n", __func__); + + /* return an error on purpose */ + return -ENODEV; + } + +stayinbootmode: + /* Eprom is invalid or blank stay in boot mode */ + dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__); + serial->product_info.TiMode = TI_MODE_BOOT; + + return 0; +} + + +static int ti_do_config(struct edgeport_port *port, int feature, int on) +{ + int port_number = port->port->port_number; + + on = !!on; /* 1 or 0 not bitmask */ + return send_cmd(port->port->serial->dev, + feature, (__u8)(UMPM_UART1_PORT + port_number), + on, NULL, 0); +} + + +static int restore_mcr(struct edgeport_port *port, __u8 mcr) +{ + int status = 0; + + dev_dbg(&port->port->dev, "%s - %x\n", __func__, mcr); + + status = ti_do_config(port, UMPC_SET_CLR_DTR, mcr & MCR_DTR); + if (status) + return status; + status = ti_do_config(port, UMPC_SET_CLR_RTS, mcr & MCR_RTS); + if (status) + return status; + return ti_do_config(port, UMPC_SET_CLR_LOOPBACK, mcr & MCR_LOOPBACK); +} + +/* Convert TI LSR to standard UART flags */ +static __u8 map_line_status(__u8 ti_lsr) +{ + __u8 lsr = 0; + +#define MAP_FLAG(flagUmp, flagUart) \ + if (ti_lsr & flagUmp) \ + lsr |= flagUart; + + MAP_FLAG(UMP_UART_LSR_OV_MASK, LSR_OVER_ERR) /* overrun */ + MAP_FLAG(UMP_UART_LSR_PE_MASK, LSR_PAR_ERR) /* parity error */ + MAP_FLAG(UMP_UART_LSR_FE_MASK, LSR_FRM_ERR) /* framing error */ + MAP_FLAG(UMP_UART_LSR_BR_MASK, LSR_BREAK) /* break detected */ + MAP_FLAG(UMP_UART_LSR_RX_MASK, LSR_RX_AVAIL) /* rx data available */ + MAP_FLAG(UMP_UART_LSR_TX_MASK, LSR_TX_EMPTY) /* tx hold reg empty */ + +#undef MAP_FLAG + + return lsr; +} + +static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr) +{ + struct async_icount *icount; + struct tty_struct *tty; + + dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, msr); + + if (msr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | + EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { + icount = &edge_port->port->icount; + + /* update input line counters */ + if (msr & EDGEPORT_MSR_DELTA_CTS) + icount->cts++; + if (msr & EDGEPORT_MSR_DELTA_DSR) + icount->dsr++; + if (msr & EDGEPORT_MSR_DELTA_CD) + icount->dcd++; + if (msr & EDGEPORT_MSR_DELTA_RI) + icount->rng++; + wake_up_interruptible(&edge_port->port->port.delta_msr_wait); + } + + /* Save the new modem status */ + edge_port->shadow_msr = msr & 0xf0; + + tty = tty_port_tty_get(&edge_port->port->port); + /* handle CTS flow control */ + if (tty && C_CRTSCTS(tty)) { + if (msr & EDGEPORT_MSR_CTS) + tty_wakeup(tty); + } + tty_kref_put(tty); +} + +static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data, + __u8 lsr, __u8 data) +{ + struct async_icount *icount; + __u8 new_lsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR | + LSR_FRM_ERR | LSR_BREAK)); + + dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, new_lsr); + + edge_port->shadow_lsr = lsr; + + if (new_lsr & LSR_BREAK) + /* + * Parity and Framing errors only count if they + * occur exclusive of a break being received. + */ + new_lsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK); + + /* Place LSR data byte into Rx buffer */ + if (lsr_data) + edge_tty_recv(edge_port->port, &data, 1); + + /* update input line counters */ + icount = &edge_port->port->icount; + if (new_lsr & LSR_BREAK) + icount->brk++; + if (new_lsr & LSR_OVER_ERR) + icount->overrun++; + if (new_lsr & LSR_PAR_ERR) + icount->parity++; + if (new_lsr & LSR_FRM_ERR) + icount->frame++; +} + + +static void edge_interrupt_callback(struct urb *urb) +{ + struct edgeport_serial *edge_serial = urb->context; + struct usb_serial_port *port; + struct edgeport_port *edge_port; + struct device *dev; + unsigned char *data = urb->transfer_buffer; + int length = urb->actual_length; + int port_number; + int function; + int retval; + __u8 lsr; + __u8 msr; + int status = urb->status; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_err(&urb->dev->dev, "%s - nonzero urb status received: " + "%d\n", __func__, status); + goto exit; + } + + if (!length) { + dev_dbg(&urb->dev->dev, "%s - no data in urb\n", __func__); + goto exit; + } + + dev = &edge_serial->serial->dev->dev; + usb_serial_debug_data(dev, __func__, length, data); + + if (length != 2) { + dev_dbg(dev, "%s - expecting packet of size 2, got %d\n", __func__, length); + goto exit; + } + + port_number = TIUMP_GET_PORT_FROM_CODE(data[0]); + function = TIUMP_GET_FUNC_FROM_CODE(data[0]); + dev_dbg(dev, "%s - port_number %d, function %d, info 0x%x\n", __func__, + port_number, function, data[1]); + port = edge_serial->serial->port[port_number]; + edge_port = usb_get_serial_port_data(port); + if (!edge_port) { + dev_dbg(dev, "%s - edge_port not found\n", __func__); + return; + } + switch (function) { + case TIUMP_INTERRUPT_CODE_LSR: + lsr = map_line_status(data[1]); + if (lsr & UMP_UART_LSR_DATA_MASK) { + /* Save the LSR event for bulk read + completion routine */ + dev_dbg(dev, "%s - LSR Event Port %u LSR Status = %02x\n", + __func__, port_number, lsr); + edge_port->lsr_event = 1; + edge_port->lsr_mask = lsr; + } else { + dev_dbg(dev, "%s - ===== Port %d LSR Status = %02x ======\n", + __func__, port_number, lsr); + handle_new_lsr(edge_port, 0, lsr, 0); + } + break; + + case TIUMP_INTERRUPT_CODE_MSR: /* MSR */ + /* Copy MSR from UMP */ + msr = data[1]; + dev_dbg(dev, "%s - ===== Port %u MSR Status = %02x ======\n", + __func__, port_number, msr); + handle_new_msr(edge_port, msr); + break; + + default: + dev_err(&urb->dev->dev, + "%s - Unknown Interrupt code from UMP %x\n", + __func__, data[1]); + break; + + } + +exit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + dev_err(&urb->dev->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, retval); +} + +static void edge_bulk_in_callback(struct urb *urb) +{ + struct edgeport_port *edge_port = urb->context; + struct device *dev = &edge_port->port->dev; + unsigned char *data = urb->transfer_buffer; + int retval = 0; + int port_number; + int status = urb->status; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); + return; + default: + dev_err(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n", __func__, status); + } + + if (status == -EPIPE) + goto exit; + + if (status) { + dev_err(&urb->dev->dev, "%s - stopping read!\n", __func__); + return; + } + + port_number = edge_port->port->port_number; + + if (edge_port->lsr_event) { + edge_port->lsr_event = 0; + dev_dbg(dev, "%s ===== Port %u LSR Status = %02x, Data = %02x ======\n", + __func__, port_number, edge_port->lsr_mask, *data); + handle_new_lsr(edge_port, 1, edge_port->lsr_mask, *data); + /* Adjust buffer length/pointer */ + --urb->actual_length; + ++data; + } + + if (urb->actual_length) { + usb_serial_debug_data(dev, __func__, urb->actual_length, data); + if (edge_port->close_pending) + dev_dbg(dev, "%s - close pending, dropping data on the floor\n", + __func__); + else + edge_tty_recv(edge_port->port, data, + urb->actual_length); + edge_port->port->icount.rx += urb->actual_length; + } + +exit: + /* continue read unless stopped */ + spin_lock(&edge_port->ep_lock); + if (edge_port->ep_read_urb_state == EDGE_READ_URB_RUNNING) + retval = usb_submit_urb(urb, GFP_ATOMIC); + else if (edge_port->ep_read_urb_state == EDGE_READ_URB_STOPPING) + edge_port->ep_read_urb_state = EDGE_READ_URB_STOPPED; + + spin_unlock(&edge_port->ep_lock); + if (retval) + dev_err(dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); +} + +static void edge_tty_recv(struct usb_serial_port *port, unsigned char *data, + int length) +{ + int queued; + + queued = tty_insert_flip_string(&port->port, data, length); + if (queued < length) + dev_err(&port->dev, "%s - dropping data, %d bytes lost\n", + __func__, length - queued); + tty_flip_buffer_push(&port->port); +} + +static void edge_bulk_out_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + int status = urb->status; + struct tty_struct *tty; + + edge_port->ep_write_urb_in_use = 0; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_err_console(port, "%s - nonzero write bulk status " + "received: %d\n", __func__, status); + } + + /* send any buffered data */ + tty = tty_port_tty_get(&port->port); + edge_send(port, tty); + tty_kref_put(tty); +} + +static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + struct edgeport_serial *edge_serial; + struct usb_device *dev; + struct urb *urb; + int port_number; + int status; + u16 open_settings; + u8 transaction_timeout; + + if (edge_port == NULL) + return -ENODEV; + + port_number = port->port_number; + + dev = port->serial->dev; + + /* turn off loopback */ + status = ti_do_config(edge_port, UMPC_SET_CLR_LOOPBACK, 0); + if (status) { + dev_err(&port->dev, + "%s - cannot send clear loopback command, %d\n", + __func__, status); + return status; + } + + /* set up the port settings */ + if (tty) + edge_set_termios(tty, port, &tty->termios); + + /* open up the port */ + + /* milliseconds to timeout for DMA transfer */ + transaction_timeout = 2; + + edge_port->ump_read_timeout = + max(20, ((transaction_timeout * 3) / 2)); + + /* milliseconds to timeout for DMA transfer */ + open_settings = (u8)(UMP_DMA_MODE_CONTINOUS | + UMP_PIPE_TRANS_TIMEOUT_ENA | + (transaction_timeout << 2)); + + dev_dbg(&port->dev, "%s - Sending UMPC_OPEN_PORT\n", __func__); + + /* Tell TI to open and start the port */ + status = send_cmd(dev, UMPC_OPEN_PORT, + (u8)(UMPM_UART1_PORT + port_number), open_settings, NULL, 0); + if (status) { + dev_err(&port->dev, "%s - cannot send open command, %d\n", + __func__, status); + return status; + } + + /* Start the DMA? */ + status = send_cmd(dev, UMPC_START_PORT, + (u8)(UMPM_UART1_PORT + port_number), 0, NULL, 0); + if (status) { + dev_err(&port->dev, "%s - cannot send start DMA command, %d\n", + __func__, status); + return status; + } + + /* Clear TX and RX buffers in UMP */ + status = purge_port(port, UMP_PORT_DIR_OUT | UMP_PORT_DIR_IN); + if (status) { + dev_err(&port->dev, + "%s - cannot send clear buffers command, %d\n", + __func__, status); + return status; + } + + /* Read Initial MSR */ + status = ti_vread_sync(dev, UMPC_READ_MSR, 0, + (__u16)(UMPM_UART1_PORT + port_number), + &edge_port->shadow_msr, 1); + if (status) { + dev_err(&port->dev, "%s - cannot send read MSR command, %d\n", + __func__, status); + return status; + } + + dev_dbg(&port->dev, "ShadowMSR 0x%X\n", edge_port->shadow_msr); + + /* Set Initial MCR */ + edge_port->shadow_mcr = MCR_RTS | MCR_DTR; + dev_dbg(&port->dev, "ShadowMCR 0x%X\n", edge_port->shadow_mcr); + + edge_serial = edge_port->edge_serial; + if (mutex_lock_interruptible(&edge_serial->es_lock)) + return -ERESTARTSYS; + if (edge_serial->num_ports_open == 0) { + /* we are the first port to open, post the interrupt urb */ + urb = edge_serial->serial->port[0]->interrupt_in_urb; + if (!urb) { + dev_err(&port->dev, + "%s - no interrupt urb present, exiting\n", + __func__); + status = -EINVAL; + goto release_es_lock; + } + urb->context = edge_serial; + status = usb_submit_urb(urb, GFP_KERNEL); + if (status) { + dev_err(&port->dev, + "%s - usb_submit_urb failed with value %d\n", + __func__, status); + goto release_es_lock; + } + } + + /* + * reset the data toggle on the bulk endpoints to work around bug in + * host controllers where things get out of sync some times + */ + usb_clear_halt(dev, port->write_urb->pipe); + usb_clear_halt(dev, port->read_urb->pipe); + + /* start up our bulk read urb */ + urb = port->read_urb; + if (!urb) { + dev_err(&port->dev, "%s - no read urb present, exiting\n", + __func__); + status = -EINVAL; + goto unlink_int_urb; + } + edge_port->ep_read_urb_state = EDGE_READ_URB_RUNNING; + urb->context = edge_port; + status = usb_submit_urb(urb, GFP_KERNEL); + if (status) { + dev_err(&port->dev, + "%s - read bulk usb_submit_urb failed with value %d\n", + __func__, status); + goto unlink_int_urb; + } + + ++edge_serial->num_ports_open; + + goto release_es_lock; + +unlink_int_urb: + if (edge_port->edge_serial->num_ports_open == 0) + usb_kill_urb(port->serial->port[0]->interrupt_in_urb); +release_es_lock: + mutex_unlock(&edge_serial->es_lock); + return status; +} + +static void edge_close(struct usb_serial_port *port) +{ + struct edgeport_serial *edge_serial; + struct edgeport_port *edge_port; + struct usb_serial *serial = port->serial; + unsigned long flags; + int port_number; + + edge_serial = usb_get_serial_data(port->serial); + edge_port = usb_get_serial_port_data(port); + if (edge_serial == NULL || edge_port == NULL) + return; + + /* The bulkreadcompletion routine will check + * this flag and dump add read data */ + edge_port->close_pending = 1; + + usb_kill_urb(port->read_urb); + usb_kill_urb(port->write_urb); + edge_port->ep_write_urb_in_use = 0; + spin_lock_irqsave(&edge_port->ep_lock, flags); + kfifo_reset_out(&port->write_fifo); + spin_unlock_irqrestore(&edge_port->ep_lock, flags); + + dev_dbg(&port->dev, "%s - send umpc_close_port\n", __func__); + port_number = port->port_number; + send_cmd(serial->dev, UMPC_CLOSE_PORT, + (__u8)(UMPM_UART1_PORT + port_number), 0, NULL, 0); + + mutex_lock(&edge_serial->es_lock); + --edge_port->edge_serial->num_ports_open; + if (edge_port->edge_serial->num_ports_open <= 0) { + /* last port is now closed, let's shut down our interrupt urb */ + usb_kill_urb(port->serial->port[0]->interrupt_in_urb); + edge_port->edge_serial->num_ports_open = 0; + } + mutex_unlock(&edge_serial->es_lock); + edge_port->close_pending = 0; +} + +static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *data, int count) +{ + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + + if (count == 0) { + dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__); + return 0; + } + + if (edge_port == NULL) + return -ENODEV; + if (edge_port->close_pending == 1) + return -ENODEV; + + count = kfifo_in_locked(&port->write_fifo, data, count, + &edge_port->ep_lock); + edge_send(port, tty); + + return count; +} + +static void edge_send(struct usb_serial_port *port, struct tty_struct *tty) +{ + int count, result; + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&edge_port->ep_lock, flags); + + if (edge_port->ep_write_urb_in_use) { + spin_unlock_irqrestore(&edge_port->ep_lock, flags); + return; + } + + count = kfifo_out(&port->write_fifo, + port->write_urb->transfer_buffer, + port->bulk_out_size); + + if (count == 0) { + spin_unlock_irqrestore(&edge_port->ep_lock, flags); + return; + } + + edge_port->ep_write_urb_in_use = 1; + + spin_unlock_irqrestore(&edge_port->ep_lock, flags); + + usb_serial_debug_data(&port->dev, __func__, count, port->write_urb->transfer_buffer); + + /* set up our urb */ + port->write_urb->transfer_buffer_length = count; + + /* send the data out the bulk port */ + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (result) { + dev_err_console(port, + "%s - failed submitting write urb, error %d\n", + __func__, result); + edge_port->ep_write_urb_in_use = 0; + /* TODO: reschedule edge_send */ + } else + edge_port->port->icount.tx += count; + + /* wakeup any process waiting for writes to complete */ + /* there is now more room in the buffer for new writes */ + if (tty) + tty_wakeup(tty); +} + +static int edge_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + int room = 0; + unsigned long flags; + + if (edge_port == NULL) + return 0; + if (edge_port->close_pending == 1) + return 0; + + spin_lock_irqsave(&edge_port->ep_lock, flags); + room = kfifo_avail(&port->write_fifo); + spin_unlock_irqrestore(&edge_port->ep_lock, flags); + + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); + return room; +} + +static int edge_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + int chars = 0; + unsigned long flags; + if (edge_port == NULL) + return 0; + + spin_lock_irqsave(&edge_port->ep_lock, flags); + chars = kfifo_len(&port->write_fifo); + spin_unlock_irqrestore(&edge_port->ep_lock, flags); + + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); + return chars; +} + +static bool edge_tx_empty(struct usb_serial_port *port) +{ + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + int ret; + + ret = tx_active(edge_port); + if (ret > 0) + return false; + + return true; +} + +static void edge_throttle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + int status; + + if (edge_port == NULL) + return; + + /* if we are implementing XON/XOFF, send the stop character */ + if (I_IXOFF(tty)) { + unsigned char stop_char = STOP_CHAR(tty); + status = edge_write(tty, port, &stop_char, 1); + if (status <= 0) { + dev_err(&port->dev, "%s - failed to write stop character, %d\n", __func__, status); + } + } + + /* if we are implementing RTS/CTS, stop reads */ + /* and the Edgeport will clear the RTS line */ + if (C_CRTSCTS(tty)) + stop_read(edge_port); + +} + +static void edge_unthrottle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + int status; + + if (edge_port == NULL) + return; + + /* if we are implementing XON/XOFF, send the start character */ + if (I_IXOFF(tty)) { + unsigned char start_char = START_CHAR(tty); + status = edge_write(tty, port, &start_char, 1); + if (status <= 0) { + dev_err(&port->dev, "%s - failed to write start character, %d\n", __func__, status); + } + } + /* if we are implementing RTS/CTS, restart reads */ + /* are the Edgeport will assert the RTS line */ + if (C_CRTSCTS(tty)) { + status = restart_read(edge_port); + if (status) + dev_err(&port->dev, + "%s - read bulk usb_submit_urb failed: %d\n", + __func__, status); + } + +} + +static void stop_read(struct edgeport_port *edge_port) +{ + unsigned long flags; + + spin_lock_irqsave(&edge_port->ep_lock, flags); + + if (edge_port->ep_read_urb_state == EDGE_READ_URB_RUNNING) + edge_port->ep_read_urb_state = EDGE_READ_URB_STOPPING; + edge_port->shadow_mcr &= ~MCR_RTS; + + spin_unlock_irqrestore(&edge_port->ep_lock, flags); +} + +static int restart_read(struct edgeport_port *edge_port) +{ + struct urb *urb; + int status = 0; + unsigned long flags; + + spin_lock_irqsave(&edge_port->ep_lock, flags); + + if (edge_port->ep_read_urb_state == EDGE_READ_URB_STOPPED) { + urb = edge_port->port->read_urb; + status = usb_submit_urb(urb, GFP_ATOMIC); + } + edge_port->ep_read_urb_state = EDGE_READ_URB_RUNNING; + edge_port->shadow_mcr |= MCR_RTS; + + spin_unlock_irqrestore(&edge_port->ep_lock, flags); + + return status; +} + +static void change_port_settings(struct tty_struct *tty, + struct edgeport_port *edge_port, struct ktermios *old_termios) +{ + struct device *dev = &edge_port->port->dev; + struct ump_uart_config *config; + int baud; + unsigned cflag; + int status; + int port_number = edge_port->port->port_number; + + config = kmalloc (sizeof (*config), GFP_KERNEL); + if (!config) { + tty->termios = *old_termios; + return; + } + + cflag = tty->termios.c_cflag; + + config->wFlags = 0; + + /* These flags must be set */ + config->wFlags |= UMP_MASK_UART_FLAGS_RECEIVE_MS_INT; + config->wFlags |= UMP_MASK_UART_FLAGS_AUTO_START_ON_ERR; + config->bUartMode = (__u8)(edge_port->bUartMode); + + switch (cflag & CSIZE) { + case CS5: + config->bDataBits = UMP_UART_CHAR5BITS; + dev_dbg(dev, "%s - data bits = 5\n", __func__); + break; + case CS6: + config->bDataBits = UMP_UART_CHAR6BITS; + dev_dbg(dev, "%s - data bits = 6\n", __func__); + break; + case CS7: + config->bDataBits = UMP_UART_CHAR7BITS; + dev_dbg(dev, "%s - data bits = 7\n", __func__); + break; + default: + case CS8: + config->bDataBits = UMP_UART_CHAR8BITS; + dev_dbg(dev, "%s - data bits = 8\n", __func__); + break; + } + + if (cflag & PARENB) { + if (cflag & PARODD) { + config->wFlags |= UMP_MASK_UART_FLAGS_PARITY; + config->bParity = UMP_UART_ODDPARITY; + dev_dbg(dev, "%s - parity = odd\n", __func__); + } else { + config->wFlags |= UMP_MASK_UART_FLAGS_PARITY; + config->bParity = UMP_UART_EVENPARITY; + dev_dbg(dev, "%s - parity = even\n", __func__); + } + } else { + config->bParity = UMP_UART_NOPARITY; + dev_dbg(dev, "%s - parity = none\n", __func__); + } + + if (cflag & CSTOPB) { + config->bStopBits = UMP_UART_STOPBIT2; + dev_dbg(dev, "%s - stop bits = 2\n", __func__); + } else { + config->bStopBits = UMP_UART_STOPBIT1; + dev_dbg(dev, "%s - stop bits = 1\n", __func__); + } + + /* figure out the flow control settings */ + if (cflag & CRTSCTS) { + config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X_CTS_FLOW; + config->wFlags |= UMP_MASK_UART_FLAGS_RTS_FLOW; + dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__); + } else { + dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__); + restart_read(edge_port); + } + + /* if we are implementing XON/XOFF, set the start and stop + character in the device */ + config->cXon = START_CHAR(tty); + config->cXoff = STOP_CHAR(tty); + + /* if we are implementing INBOUND XON/XOFF */ + if (I_IXOFF(tty)) { + config->wFlags |= UMP_MASK_UART_FLAGS_IN_X; + dev_dbg(dev, "%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", + __func__, config->cXon, config->cXoff); + } else + dev_dbg(dev, "%s - INBOUND XON/XOFF is disabled\n", __func__); + + /* if we are implementing OUTBOUND XON/XOFF */ + if (I_IXON(tty)) { + config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X; + dev_dbg(dev, "%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", + __func__, config->cXon, config->cXoff); + } else + dev_dbg(dev, "%s - OUTBOUND XON/XOFF is disabled\n", __func__); + + tty->termios.c_cflag &= ~CMSPAR; + + /* Round the baud rate */ + baud = tty_get_baud_rate(tty); + if (!baud) { + /* pick a default, any default... */ + baud = 9600; + } else + tty_encode_baud_rate(tty, baud, baud); + + edge_port->baud_rate = baud; + config->wBaudRate = (__u16)((461550L + baud/2) / baud); + + /* FIXME: Recompute actual baud from divisor here */ + + dev_dbg(dev, "%s - baud rate = %d, wBaudRate = %d\n", __func__, baud, config->wBaudRate); + + dev_dbg(dev, "wBaudRate: %d\n", (int)(461550L / config->wBaudRate)); + dev_dbg(dev, "wFlags: 0x%x\n", config->wFlags); + dev_dbg(dev, "bDataBits: %d\n", config->bDataBits); + dev_dbg(dev, "bParity: %d\n", config->bParity); + dev_dbg(dev, "bStopBits: %d\n", config->bStopBits); + dev_dbg(dev, "cXon: %d\n", config->cXon); + dev_dbg(dev, "cXoff: %d\n", config->cXoff); + dev_dbg(dev, "bUartMode: %d\n", config->bUartMode); + + /* move the word values into big endian mode */ + cpu_to_be16s(&config->wFlags); + cpu_to_be16s(&config->wBaudRate); + + status = send_cmd(edge_port->port->serial->dev, UMPC_SET_CONFIG, + (__u8)(UMPM_UART1_PORT + port_number), + 0, (__u8 *)config, sizeof(*config)); + if (status) + dev_dbg(dev, "%s - error %d when trying to write config to device\n", + __func__, status); + kfree(config); +} + +static void edge_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + unsigned int cflag; + + cflag = tty->termios.c_cflag; + + dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, + tty->termios.c_cflag, tty->termios.c_iflag); + dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, + old_termios->c_cflag, old_termios->c_iflag); + + if (edge_port == NULL) + return; + /* change the port settings to the new ones specified */ + change_port_settings(tty, edge_port, old_termios); +} + +static int edge_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + unsigned int mcr; + unsigned long flags; + + spin_lock_irqsave(&edge_port->ep_lock, flags); + mcr = edge_port->shadow_mcr; + if (set & TIOCM_RTS) + mcr |= MCR_RTS; + if (set & TIOCM_DTR) + mcr |= MCR_DTR; + if (set & TIOCM_LOOP) + mcr |= MCR_LOOPBACK; + + if (clear & TIOCM_RTS) + mcr &= ~MCR_RTS; + if (clear & TIOCM_DTR) + mcr &= ~MCR_DTR; + if (clear & TIOCM_LOOP) + mcr &= ~MCR_LOOPBACK; + + edge_port->shadow_mcr = mcr; + spin_unlock_irqrestore(&edge_port->ep_lock, flags); + + restore_mcr(edge_port, mcr); + return 0; +} + +static int edge_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + unsigned int result = 0; + unsigned int msr; + unsigned int mcr; + unsigned long flags; + + spin_lock_irqsave(&edge_port->ep_lock, flags); + + msr = edge_port->shadow_msr; + mcr = edge_port->shadow_mcr; + result = ((mcr & MCR_DTR) ? TIOCM_DTR: 0) /* 0x002 */ + | ((mcr & MCR_RTS) ? TIOCM_RTS: 0) /* 0x004 */ + | ((msr & EDGEPORT_MSR_CTS) ? TIOCM_CTS: 0) /* 0x020 */ + | ((msr & EDGEPORT_MSR_CD) ? TIOCM_CAR: 0) /* 0x040 */ + | ((msr & EDGEPORT_MSR_RI) ? TIOCM_RI: 0) /* 0x080 */ + | ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */ + + + dev_dbg(&port->dev, "%s -- %x\n", __func__, result); + spin_unlock_irqrestore(&edge_port->ep_lock, flags); + + return result; +} + +static int get_serial_info(struct edgeport_port *edge_port, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp; + unsigned cwait; + + if (!retinfo) + return -EFAULT; + + cwait = edge_port->port->port.closing_wait; + if (cwait != ASYNC_CLOSING_WAIT_NONE) + cwait = jiffies_to_msecs(cwait) / 10; + + memset(&tmp, 0, sizeof(tmp)); + + tmp.type = PORT_16550A; + tmp.line = edge_port->port->minor; + tmp.port = edge_port->port->port_number; + tmp.irq = 0; + tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; + tmp.xmit_fifo_size = edge_port->port->bulk_out_size; + tmp.baud_base = 9600; + tmp.close_delay = 5*HZ; + tmp.closing_wait = cwait; + + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int edge_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + + switch (cmd) { + case TIOCGSERIAL: + dev_dbg(&port->dev, "%s - TIOCGSERIAL\n", __func__); + return get_serial_info(edge_port, + (struct serial_struct __user *) arg); + } + return -ENOIOCTLCMD; +} + +static void edge_break(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + int status; + int bv = 0; /* Off */ + + if (break_state == -1) + bv = 1; /* On */ + status = ti_do_config(edge_port, UMPC_SET_CLR_BREAK, bv); + if (status) + dev_dbg(&port->dev, "%s - error %d sending break set/clear command.\n", + __func__, status); +} + +static int edge_startup(struct usb_serial *serial) +{ + struct edgeport_serial *edge_serial; + int status; + + /* create our private serial structure */ + edge_serial = kzalloc(sizeof(struct edgeport_serial), GFP_KERNEL); + if (!edge_serial) + return -ENOMEM; + + mutex_init(&edge_serial->es_lock); + edge_serial->serial = serial; + usb_set_serial_data(serial, edge_serial); + + status = download_fw(edge_serial); + if (status) { + kfree(edge_serial); + return status; + } + + return 0; +} + +static void edge_disconnect(struct usb_serial *serial) +{ +} + +static void edge_release(struct usb_serial *serial) +{ + kfree(usb_get_serial_data(serial)); +} + +static int edge_port_probe(struct usb_serial_port *port) +{ + struct edgeport_port *edge_port; + int ret; + + edge_port = kzalloc(sizeof(*edge_port), GFP_KERNEL); + if (!edge_port) + return -ENOMEM; + + spin_lock_init(&edge_port->ep_lock); + edge_port->port = port; + edge_port->edge_serial = usb_get_serial_data(port->serial); + edge_port->bUartMode = default_uart_mode; + + switch (port->port_number) { + case 0: + edge_port->uart_base = UMPMEM_BASE_UART1; + edge_port->dma_address = UMPD_OEDB1_ADDRESS; + break; + case 1: + edge_port->uart_base = UMPMEM_BASE_UART2; + edge_port->dma_address = UMPD_OEDB2_ADDRESS; + break; + default: + dev_err(&port->dev, "unknown port number\n"); + ret = -ENODEV; + goto err; + } + + dev_dbg(&port->dev, + "%s - port_number = %d, uart_base = %04x, dma_address = %04x\n", + __func__, port->port_number, edge_port->uart_base, + edge_port->dma_address); + + usb_set_serial_port_data(port, edge_port); + + ret = edge_create_sysfs_attrs(port); + if (ret) + goto err; + + port->port.closing_wait = msecs_to_jiffies(closing_wait * 10); + port->port.drain_delay = 1; + + return 0; +err: + kfree(edge_port); + + return ret; +} + +static int edge_port_remove(struct usb_serial_port *port) +{ + struct edgeport_port *edge_port; + + edge_port = usb_get_serial_port_data(port); + edge_remove_sysfs_attrs(port); + kfree(edge_port); + + return 0; +} + +/* Sysfs Attributes */ + +static ssize_t uart_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_serial_port *port = to_usb_serial_port(dev); + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + + return sprintf(buf, "%d\n", edge_port->bUartMode); +} + +static ssize_t uart_mode_store(struct device *dev, + struct device_attribute *attr, const char *valbuf, size_t count) +{ + struct usb_serial_port *port = to_usb_serial_port(dev); + struct edgeport_port *edge_port = usb_get_serial_port_data(port); + unsigned int v = simple_strtoul(valbuf, NULL, 0); + + dev_dbg(dev, "%s: setting uart_mode = %d\n", __func__, v); + + if (v < 256) + edge_port->bUartMode = v; + else + dev_err(dev, "%s - uart_mode %d is invalid\n", __func__, v); + + return count; +} +static DEVICE_ATTR_RW(uart_mode); + +static int edge_create_sysfs_attrs(struct usb_serial_port *port) +{ + return device_create_file(&port->dev, &dev_attr_uart_mode); +} + +static int edge_remove_sysfs_attrs(struct usb_serial_port *port) +{ + device_remove_file(&port->dev, &dev_attr_uart_mode); + return 0; +} + + +static struct usb_serial_driver edgeport_1port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "edgeport_ti_1", + }, + .description = "Edgeport TI 1 port adapter", + .id_table = edgeport_1port_id_table, + .num_ports = 1, + .open = edge_open, + .close = edge_close, + .throttle = edge_throttle, + .unthrottle = edge_unthrottle, + .attach = edge_startup, + .disconnect = edge_disconnect, + .release = edge_release, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, + .ioctl = edge_ioctl, + .set_termios = edge_set_termios, + .tiocmget = edge_tiocmget, + .tiocmset = edge_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, + .write = edge_write, + .write_room = edge_write_room, + .chars_in_buffer = edge_chars_in_buffer, + .tx_empty = edge_tx_empty, + .break_ctl = edge_break, + .read_int_callback = edge_interrupt_callback, + .read_bulk_callback = edge_bulk_in_callback, + .write_bulk_callback = edge_bulk_out_callback, +}; + +static struct usb_serial_driver edgeport_2port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "edgeport_ti_2", + }, + .description = "Edgeport TI 2 port adapter", + .id_table = edgeport_2port_id_table, + .num_ports = 2, + .open = edge_open, + .close = edge_close, + .throttle = edge_throttle, + .unthrottle = edge_unthrottle, + .attach = edge_startup, + .disconnect = edge_disconnect, + .release = edge_release, + .port_probe = edge_port_probe, + .port_remove = edge_port_remove, + .ioctl = edge_ioctl, + .set_termios = edge_set_termios, + .tiocmget = edge_tiocmget, + .tiocmset = edge_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, + .write = edge_write, + .write_room = edge_write_room, + .chars_in_buffer = edge_chars_in_buffer, + .tx_empty = edge_tx_empty, + .break_ctl = edge_break, + .read_int_callback = edge_interrupt_callback, + .read_bulk_callback = edge_bulk_in_callback, + .write_bulk_callback = edge_bulk_out_callback, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &edgeport_1port_device, &edgeport_2port_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table_combined); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_FIRMWARE("edgeport/down3.bin"); + +module_param(closing_wait, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs"); + +module_param(ignore_cpu_rev, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(ignore_cpu_rev, + "Ignore the cpu revision when connecting to a device"); + +module_param(default_uart_mode, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(default_uart_mode, "Default uart_mode, 0=RS232, ..."); diff --git a/kernel/drivers/usb/serial/io_ti.h b/kernel/drivers/usb/serial/io_ti.h new file mode 100644 index 000000000..1bd67b24f --- /dev/null +++ b/kernel/drivers/usb/serial/io_ti.h @@ -0,0 +1,186 @@ +/***************************************************************************** + * + * Copyright (C) 1997-2002 Inside Out Networks, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * + * Feb-16-2001 DMI Added I2C structure definitions + * May-29-2002 gkh Ported to Linux + * + * + ******************************************************************************/ + +#ifndef _IO_TI_H_ +#define _IO_TI_H_ + +/* Address Space */ +#define DTK_ADDR_SPACE_XDATA 0x03 /* Addr is placed in XDATA space */ +#define DTK_ADDR_SPACE_I2C_TYPE_II 0x82 /* Addr is placed in I2C area */ +#define DTK_ADDR_SPACE_I2C_TYPE_III 0x83 /* Addr is placed in I2C area */ + +/* UART Defines */ +#define UMPMEM_BASE_UART1 0xFFA0 /* UMP UART1 base address */ +#define UMPMEM_BASE_UART2 0xFFB0 /* UMP UART2 base address */ +#define UMPMEM_OFFS_UART_LSR 0x05 /* UMP UART LSR register offset */ + +/* Bits per character */ +#define UMP_UART_CHAR5BITS 0x00 +#define UMP_UART_CHAR6BITS 0x01 +#define UMP_UART_CHAR7BITS 0x02 +#define UMP_UART_CHAR8BITS 0x03 + +/* Parity */ +#define UMP_UART_NOPARITY 0x00 +#define UMP_UART_ODDPARITY 0x01 +#define UMP_UART_EVENPARITY 0x02 +#define UMP_UART_MARKPARITY 0x03 +#define UMP_UART_SPACEPARITY 0x04 + +/* Stop bits */ +#define UMP_UART_STOPBIT1 0x00 +#define UMP_UART_STOPBIT15 0x01 +#define UMP_UART_STOPBIT2 0x02 + +/* Line status register masks */ +#define UMP_UART_LSR_OV_MASK 0x01 +#define UMP_UART_LSR_PE_MASK 0x02 +#define UMP_UART_LSR_FE_MASK 0x04 +#define UMP_UART_LSR_BR_MASK 0x08 +#define UMP_UART_LSR_ER_MASK 0x0F +#define UMP_UART_LSR_RX_MASK 0x10 +#define UMP_UART_LSR_TX_MASK 0x20 + +#define UMP_UART_LSR_DATA_MASK (LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK) + +/* Port Settings Constants) */ +#define UMP_MASK_UART_FLAGS_RTS_FLOW 0x0001 +#define UMP_MASK_UART_FLAGS_RTS_DISABLE 0x0002 +#define UMP_MASK_UART_FLAGS_PARITY 0x0008 +#define UMP_MASK_UART_FLAGS_OUT_X_DSR_FLOW 0x0010 +#define UMP_MASK_UART_FLAGS_OUT_X_CTS_FLOW 0x0020 +#define UMP_MASK_UART_FLAGS_OUT_X 0x0040 +#define UMP_MASK_UART_FLAGS_OUT_XA 0x0080 +#define UMP_MASK_UART_FLAGS_IN_X 0x0100 +#define UMP_MASK_UART_FLAGS_DTR_FLOW 0x0800 +#define UMP_MASK_UART_FLAGS_DTR_DISABLE 0x1000 +#define UMP_MASK_UART_FLAGS_RECEIVE_MS_INT 0x2000 +#define UMP_MASK_UART_FLAGS_AUTO_START_ON_ERR 0x4000 + +#define UMP_DMA_MODE_CONTINOUS 0x01 +#define UMP_PIPE_TRANS_TIMEOUT_ENA 0x80 +#define UMP_PIPE_TRANSFER_MODE_MASK 0x03 +#define UMP_PIPE_TRANS_TIMEOUT_MASK 0x7C + +/* Purge port Direction Mask Bits */ +#define UMP_PORT_DIR_OUT 0x01 +#define UMP_PORT_DIR_IN 0x02 + +/* Address of Port 0 */ +#define UMPM_UART1_PORT 0x03 + +/* Commands */ +#define UMPC_SET_CONFIG 0x05 +#define UMPC_OPEN_PORT 0x06 +#define UMPC_CLOSE_PORT 0x07 +#define UMPC_START_PORT 0x08 +#define UMPC_STOP_PORT 0x09 +#define UMPC_TEST_PORT 0x0A +#define UMPC_PURGE_PORT 0x0B + +/* Force the Firmware to complete the current Read */ +#define UMPC_COMPLETE_READ 0x80 +/* Force UMP back into BOOT Mode */ +#define UMPC_HARDWARE_RESET 0x81 +/* + * Copy current download image to type 0xf2 record in 16k I2C + * firmware will change 0xff record to type 2 record when complete + */ +#define UMPC_COPY_DNLD_TO_I2C 0x82 + +/* + * Special function register commands + * wIndex is register address + * wValue is MSB/LSB mask/data + */ +#define UMPC_WRITE_SFR 0x83 /* Write SFR Register */ + +/* wIndex is register address */ +#define UMPC_READ_SFR 0x84 /* Read SRF Register */ + +/* Set or Clear DTR (wValue bit 0 Set/Clear) wIndex ModuleID (port) */ +#define UMPC_SET_CLR_DTR 0x85 + +/* Set or Clear RTS (wValue bit 0 Set/Clear) wIndex ModuleID (port) */ +#define UMPC_SET_CLR_RTS 0x86 + +/* Set or Clear LOOPBACK (wValue bit 0 Set/Clear) wIndex ModuleID (port) */ +#define UMPC_SET_CLR_LOOPBACK 0x87 + +/* Set or Clear BREAK (wValue bit 0 Set/Clear) wIndex ModuleID (port) */ +#define UMPC_SET_CLR_BREAK 0x88 + +/* Read MSR wIndex ModuleID (port) */ +#define UMPC_READ_MSR 0x89 + +/* Toolkit commands */ +/* Read-write group */ +#define UMPC_MEMORY_READ 0x92 +#define UMPC_MEMORY_WRITE 0x93 + +/* + * UMP DMA Definitions + */ +#define UMPD_OEDB1_ADDRESS 0xFF08 +#define UMPD_OEDB2_ADDRESS 0xFF10 + +struct out_endpoint_desc_block { + __u8 Configuration; + __u8 XBufAddr; + __u8 XByteCount; + __u8 Unused1; + __u8 Unused2; + __u8 YBufAddr; + __u8 YByteCount; + __u8 BufferSize; +} __attribute__((packed)); + + +/* + * TYPE DEFINITIONS + * Structures for Firmware commands + */ +/* UART settings */ +struct ump_uart_config { + __u16 wBaudRate; /* Baud rate */ + __u16 wFlags; /* Bitmap mask of flags */ + __u8 bDataBits; /* 5..8 - data bits per character */ + __u8 bParity; /* Parity settings */ + __u8 bStopBits; /* Stop bits settings */ + char cXon; /* XON character */ + char cXoff; /* XOFF character */ + __u8 bUartMode; /* Will be updated when a user */ + /* interface is defined */ +} __attribute__((packed)); + + +/* + * TYPE DEFINITIONS + * Structures for USB interrupts + */ +/* Interrupt packet structure */ +struct ump_interrupt { + __u8 bICode; /* Interrupt code (interrupt num) */ + __u8 bIInfo; /* Interrupt information */ +} __attribute__((packed)); + + +#define TIUMP_GET_PORT_FROM_CODE(c) (((c) >> 4) - 3) +#define TIUMP_GET_FUNC_FROM_CODE(c) ((c) & 0x0f) +#define TIUMP_INTERRUPT_CODE_LSR 0x03 +#define TIUMP_INTERRUPT_CODE_MSR 0x04 + +#endif diff --git a/kernel/drivers/usb/serial/io_usbvend.h b/kernel/drivers/usb/serial/io_usbvend.h new file mode 100644 index 000000000..6f6a856bc --- /dev/null +++ b/kernel/drivers/usb/serial/io_usbvend.h @@ -0,0 +1,683 @@ +/************************************************************************ + * + * USBVEND.H Vendor-specific USB definitions + * + * NOTE: This must be kept in sync with the Edgeport firmware and + * must be kept backward-compatible with older firmware. + * + ************************************************************************ + * + * Copyright (C) 1998 Inside Out Networks, Inc. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + ************************************************************************/ + +#if !defined(_USBVEND_H) +#define _USBVEND_H + +/************************************************************************ + * + * D e f i n e s / T y p e d e f s + * + ************************************************************************/ + +// +// Definitions of USB product IDs +// + +#define USB_VENDOR_ID_ION 0x1608 // Our VID +#define USB_VENDOR_ID_TI 0x0451 // TI VID +#define USB_VENDOR_ID_AXIOHM 0x05D9 /* Axiohm VID */ + +// +// Definitions of USB product IDs (PID) +// We break the USB-defined PID into an OEM Id field (upper 6 bits) +// and a Device Id (bottom 10 bits). The Device Id defines what +// device this actually is regardless of what the OEM wants to +// call it. +// + +// ION-device OEM IDs +#define ION_OEM_ID_ION 0 // 00h Inside Out Networks +#define ION_OEM_ID_NLYNX 1 // 01h NLynx Systems +#define ION_OEM_ID_GENERIC 2 // 02h Generic OEM +#define ION_OEM_ID_MAC 3 // 03h Mac Version +#define ION_OEM_ID_MEGAWOLF 4 // 04h Lupusb OEM Mac version (MegaWolf) +#define ION_OEM_ID_MULTITECH 5 // 05h Multitech Rapidports +#define ION_OEM_ID_AGILENT 6 // 06h AGILENT board + + +// ION-device Device IDs +// Product IDs - assigned to match middle digit of serial number (No longer true) + +#define ION_DEVICE_ID_80251_NETCHIP 0x020 // This bit is set in the PID if this edgeport hardware$ + // is based on the 80251+Netchip. + +#define ION_DEVICE_ID_GENERATION_1 0x00 // Value for 930 based edgeports +#define ION_DEVICE_ID_GENERATION_2 0x01 // Value for 80251+Netchip. +#define ION_DEVICE_ID_GENERATION_3 0x02 // Value for Texas Instruments TUSB5052 chip +#define ION_DEVICE_ID_GENERATION_4 0x03 // Watchport Family of products +#define ION_GENERATION_MASK 0x03 + +#define ION_DEVICE_ID_HUB_MASK 0x0080 // This bit in the PID designates a HUB device + // for example 8C would be a 421 4 port hub + // and 8D would be a 2 port embedded hub + +#define EDGEPORT_DEVICE_ID_MASK 0x0ff // Not including OEM or GENERATION fields + +#define ION_DEVICE_ID_UNCONFIGURED_EDGE_DEVICE 0x000 // In manufacturing only +#define ION_DEVICE_ID_EDGEPORT_4 0x001 // Edgeport/4 RS232 +#define ION_DEVICE_ID_EDGEPORT_8R 0x002 // Edgeport with RJ45 no Ring +#define ION_DEVICE_ID_RAPIDPORT_4 0x003 // Rapidport/4 +#define ION_DEVICE_ID_EDGEPORT_4T 0x004 // Edgeport/4 RS232 for Telxon (aka "Fleetport") +#define ION_DEVICE_ID_EDGEPORT_2 0x005 // Edgeport/2 RS232 +#define ION_DEVICE_ID_EDGEPORT_4I 0x006 // Edgeport/4 RS422 +#define ION_DEVICE_ID_EDGEPORT_2I 0x007 // Edgeport/2 RS422/RS485 +#define ION_DEVICE_ID_EDGEPORT_8RR 0x008 // Edgeport with RJ45 with Data and RTS/CTS only +// ION_DEVICE_ID_EDGEPORT_8_HANDBUILT 0x009 // Hand-built Edgeport/8 (Placeholder, used in middle digit of serial number only!) +// ION_DEVICE_ID_MULTIMODEM_4X56 0x00A // MultiTech version of RP/4 (Placeholder, used in middle digit of serial number only!) +#define ION_DEVICE_ID_EDGEPORT_PARALLEL_PORT 0x00B // Edgeport/(4)21 Parallel port (USS720) +#define ION_DEVICE_ID_EDGEPORT_421 0x00C // Edgeport/421 Hub+RS232+Parallel +#define ION_DEVICE_ID_EDGEPORT_21 0x00D // Edgeport/21 RS232+Parallel +#define ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU 0x00E // Half of an Edgeport/8 (the kind with 2 EP/4s on 1 PCB) +#define ION_DEVICE_ID_EDGEPORT_8 0x00F // Edgeport/8 (single-CPU) +#define ION_DEVICE_ID_EDGEPORT_2_DIN 0x010 // Edgeport/2 RS232 with Apple DIN connector +#define ION_DEVICE_ID_EDGEPORT_4_DIN 0x011 // Edgeport/4 RS232 with Apple DIN connector +#define ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU 0x012 // Half of an Edgeport/16 (the kind with 2 EP/8s) +#define ION_DEVICE_ID_EDGEPORT_COMPATIBLE 0x013 // Edgeport Compatible, for NCR, Axiohm etc. testing +#define ION_DEVICE_ID_EDGEPORT_8I 0x014 // Edgeport/8 RS422 (single-CPU) +#define ION_DEVICE_ID_EDGEPORT_1 0x015 // Edgeport/1 RS232 +#define ION_DEVICE_ID_EPOS44 0x016 // Half of an EPOS/44 (TIUMP BASED) +#define ION_DEVICE_ID_EDGEPORT_42 0x017 // Edgeport/42 +#define ION_DEVICE_ID_EDGEPORT_412_8 0x018 // Edgeport/412 8 port part +#define ION_DEVICE_ID_EDGEPORT_412_4 0x019 // Edgeport/412 4 port part +#define ION_DEVICE_ID_EDGEPORT_22I 0x01A // Edgeport/22I is an Edgeport/4 with ports 1&2 RS422 and ports 3&4 RS232 + +// Compact Form factor TI based devices 2c, 21c, 22c, 221c +#define ION_DEVICE_ID_EDGEPORT_2C 0x01B // Edgeport/2c is a TI based Edgeport/2 - Small I2c +#define ION_DEVICE_ID_EDGEPORT_221C 0x01C // Edgeport/221c is a TI based Edgeport/2 with lucent chip and + // 2 external hub ports - Large I2C +#define ION_DEVICE_ID_EDGEPORT_22C 0x01D // Edgeport/22c is a TI based Edgeport/2 with + // 2 external hub ports - Large I2C +#define ION_DEVICE_ID_EDGEPORT_21C 0x01E // Edgeport/21c is a TI based Edgeport/2 with lucent chip + // Small I2C + + +/* + * DANGER DANGER The 0x20 bit was used to indicate a 8251/netchip GEN 2 device. + * Since the MAC, Linux, and Optimal drivers still used the old code + * I suggest that you skip the 0x20 bit when creating new PIDs + */ + + +// Generation 3 devices -- 3410 based edgport/1 (256 byte I2C) +#define ION_DEVICE_ID_TI3410_EDGEPORT_1 0x040 // Edgeport/1 RS232 +#define ION_DEVICE_ID_TI3410_EDGEPORT_1I 0x041 // Edgeport/1i- RS422 model + +// Ti based software switchable RS232/RS422/RS485 devices +#define ION_DEVICE_ID_EDGEPORT_4S 0x042 // Edgeport/4s - software switchable model +#define ION_DEVICE_ID_EDGEPORT_8S 0x043 // Edgeport/8s - software switchable model + +// Usb to Ethernet dongle +#define ION_DEVICE_ID_EDGEPORT_E 0x0E0 // Edgeport/E Usb to Ethernet + +// Edgeport TI based devices +#define ION_DEVICE_ID_TI_EDGEPORT_4 0x0201 // Edgeport/4 RS232 +#define ION_DEVICE_ID_TI_EDGEPORT_2 0x0205 // Edgeport/2 RS232 +#define ION_DEVICE_ID_TI_EDGEPORT_4I 0x0206 // Edgeport/4i RS422 +#define ION_DEVICE_ID_TI_EDGEPORT_2I 0x0207 // Edgeport/2i RS422/RS485 +#define ION_DEVICE_ID_TI_EDGEPORT_421 0x020C // Edgeport/421 4 hub 2 RS232 + Parallel (lucent on a different hub port) +#define ION_DEVICE_ID_TI_EDGEPORT_21 0x020D // Edgeport/21 2 RS232 + Parallel (lucent on a different hub port) +#define ION_DEVICE_ID_TI_EDGEPORT_416 0x0212 // Edgeport/416 +#define ION_DEVICE_ID_TI_EDGEPORT_1 0x0215 // Edgeport/1 RS232 +#define ION_DEVICE_ID_TI_EDGEPORT_42 0x0217 // Edgeport/42 4 hub 2 RS232 +#define ION_DEVICE_ID_TI_EDGEPORT_22I 0x021A // Edgeport/22I is an Edgeport/4 with ports 1&2 RS422 and ports 3&4 RS232 +#define ION_DEVICE_ID_TI_EDGEPORT_2C 0x021B // Edgeport/2c RS232 +#define ION_DEVICE_ID_TI_EDGEPORT_221C 0x021C // Edgeport/221c is a TI based Edgeport/2 with lucent chip and + // 2 external hub ports - Large I2C +#define ION_DEVICE_ID_TI_EDGEPORT_22C 0x021D // Edgeport/22c is a TI based Edgeport/2 with + // 2 external hub ports - Large I2C +#define ION_DEVICE_ID_TI_EDGEPORT_21C 0x021E // Edgeport/21c is a TI based Edgeport/2 with lucent chip + +// Generation 3 devices -- 3410 based edgport/1 (256 byte I2C) +#define ION_DEVICE_ID_TI_TI3410_EDGEPORT_1 0x0240 // Edgeport/1 RS232 +#define ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I 0x0241 // Edgeport/1i- RS422 model + +// Ti based software switchable RS232/RS422/RS485 devices +#define ION_DEVICE_ID_TI_EDGEPORT_4S 0x0242 // Edgeport/4s - software switchable model +#define ION_DEVICE_ID_TI_EDGEPORT_8S 0x0243 // Edgeport/8s - software switchable model +#define ION_DEVICE_ID_TI_EDGEPORT_8 0x0244 // Edgeport/8 (single-CPU) +#define ION_DEVICE_ID_TI_EDGEPORT_416B 0x0247 // Edgeport/416 + + +/************************************************************************ + * + * Generation 4 devices + * + ************************************************************************/ + +// Watchport based on 3410 both 1-wire and binary products (16K I2C) +#define ION_DEVICE_ID_WP_UNSERIALIZED 0x300 // Watchport based on 3410 both 1-wire and binary products +#define ION_DEVICE_ID_WP_PROXIMITY 0x301 // Watchport/P Discontinued +#define ION_DEVICE_ID_WP_MOTION 0x302 // Watchport/M +#define ION_DEVICE_ID_WP_MOISTURE 0x303 // Watchport/W +#define ION_DEVICE_ID_WP_TEMPERATURE 0x304 // Watchport/T +#define ION_DEVICE_ID_WP_HUMIDITY 0x305 // Watchport/H + +#define ION_DEVICE_ID_WP_POWER 0x306 // Watchport +#define ION_DEVICE_ID_WP_LIGHT 0x307 // Watchport +#define ION_DEVICE_ID_WP_RADIATION 0x308 // Watchport +#define ION_DEVICE_ID_WP_ACCELERATION 0x309 // Watchport/A +#define ION_DEVICE_ID_WP_DISTANCE 0x30A // Watchport/D Discontinued +#define ION_DEVICE_ID_WP_PROX_DIST 0x30B // Watchport/D uses distance sensor + // Default to /P function + +#define ION_DEVICE_ID_PLUS_PWR_HP4CD 0x30C // 5052 Plus Power HubPort/4CD+ (for Dell) +#define ION_DEVICE_ID_PLUS_PWR_HP4C 0x30D // 5052 Plus Power HubPort/4C+ +#define ION_DEVICE_ID_PLUS_PWR_PCI 0x30E // 3410 Plus Power PCI Host Controller 4 port + + +// +// Definitions for AXIOHM USB product IDs +// +#define USB_VENDOR_ID_AXIOHM 0x05D9 // Axiohm VID + +#define AXIOHM_DEVICE_ID_MASK 0xffff +#define AXIOHM_DEVICE_ID_EPIC_A758 0xA758 +#define AXIOHM_DEVICE_ID_EPIC_A794 0xA794 +#define AXIOHM_DEVICE_ID_EPIC_A225 0xA225 + + +// +// Definitions for NCR USB product IDs +// +#define USB_VENDOR_ID_NCR 0x0404 // NCR VID + +#define NCR_DEVICE_ID_MASK 0xffff +#define NCR_DEVICE_ID_EPIC_0202 0x0202 +#define NCR_DEVICE_ID_EPIC_0203 0x0203 +#define NCR_DEVICE_ID_EPIC_0310 0x0310 +#define NCR_DEVICE_ID_EPIC_0311 0x0311 +#define NCR_DEVICE_ID_EPIC_0312 0x0312 + + +// +// Definitions for SYMBOL USB product IDs +// +#define USB_VENDOR_ID_SYMBOL 0x05E0 // Symbol VID +#define SYMBOL_DEVICE_ID_MASK 0xffff +#define SYMBOL_DEVICE_ID_KEYFOB 0x0700 + + +// +// Definitions for other product IDs +#define ION_DEVICE_ID_MT4X56USB 0x1403 // OEM device + + +#define GENERATION_ID_FROM_USB_PRODUCT_ID(ProductId) \ + ((__u16) ((ProductId >> 8) & (ION_GENERATION_MASK))) + +#define MAKE_USB_PRODUCT_ID(OemId, DeviceId) \ + ((__u16) (((OemId) << 10) || (DeviceId))) + +#define DEVICE_ID_FROM_USB_PRODUCT_ID(ProductId) \ + ((__u16) ((ProductId) & (EDGEPORT_DEVICE_ID_MASK))) + +#define OEM_ID_FROM_USB_PRODUCT_ID(ProductId) \ + ((__u16) (((ProductId) >> 10) & 0x3F)) + +// +// Definitions of parameters for download code. Note that these are +// specific to a given version of download code and must change if the +// corresponding download code changes. +// + +// TxCredits value below which driver won't bother sending (to prevent too many small writes). +// Send only if above 25% +#define EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(InitialCredit, MaxPacketSize) (max(((InitialCredit) / 4), (MaxPacketSize))) + +#define EDGE_FW_BULK_MAX_PACKET_SIZE 64 // Max Packet Size for Bulk In Endpoint (EP1) +#define EDGE_FW_BULK_READ_BUFFER_SIZE 1024 // Size to use for Bulk reads + +#define EDGE_FW_INT_MAX_PACKET_SIZE 32 // Max Packet Size for Interrupt In Endpoint + // Note that many units were shipped with MPS=16, we + // force an upgrade to this value). +#define EDGE_FW_INT_INTERVAL 2 // 2ms polling on IntPipe + + +// +// Definitions of I/O Networks vendor-specific requests +// for default endpoint +// +// bmRequestType = 01000000 Set vendor-specific, to device +// bmRequestType = 11000000 Get vendor-specific, to device +// +// These are the definitions for the bRequest field for the +// above bmRequestTypes. +// +// For the read/write Edgeport memory commands, the parameters +// are as follows: +// wValue = 16-bit address +// wIndex = unused (though we could put segment 00: or FF: here) +// wLength = # bytes to read/write (max 64) +// + +#define USB_REQUEST_ION_RESET_DEVICE 0 // Warm reboot Edgeport, retaining USB address +#define USB_REQUEST_ION_GET_EPIC_DESC 1 // Get Edgeport Compatibility Descriptor +// unused 2 // Unused, available +#define USB_REQUEST_ION_READ_RAM 3 // Read EdgePort RAM at specified addr +#define USB_REQUEST_ION_WRITE_RAM 4 // Write EdgePort RAM at specified addr +#define USB_REQUEST_ION_READ_ROM 5 // Read EdgePort ROM at specified addr +#define USB_REQUEST_ION_WRITE_ROM 6 // Write EdgePort ROM at specified addr +#define USB_REQUEST_ION_EXEC_DL_CODE 7 // Begin execution of RAM-based download + // code by jumping to address in wIndex:wValue +// 8 // Unused, available +#define USB_REQUEST_ION_ENABLE_SUSPEND 9 // Enable/Disable suspend feature + // (wValue != 0: Enable; wValue = 0: Disable) + +#define USB_REQUEST_ION_SEND_IOSP 10 // Send an IOSP command to the edgeport over the control pipe +#define USB_REQUEST_ION_RECV_IOSP 11 // Receive an IOSP command from the edgeport over the control pipe + + +#define USB_REQUEST_ION_DIS_INT_TIMER 0x80 // Sent to Axiohm to enable/ disable + // interrupt token timer + // wValue = 1, enable (default) + // wValue = 0, disable + +// +// Define parameter values for our vendor-specific commands +// + +// +// Edgeport Compatibility Descriptor +// +// This descriptor is only returned by Edgeport-compatible devices +// supporting the EPiC spec. True ION devices do not return this +// descriptor, but instead return STALL on receipt of the +// GET_EPIC_DESC command. The driver interprets a STALL to mean that +// this is a "real" Edgeport. +// + +struct edge_compatibility_bits { + // This __u32 defines which Vendor-specific commands/functionality + // the device supports on the default EP0 pipe. + + __u32 VendEnableSuspend : 1; // 0001 Set if device supports ION_ENABLE_SUSPEND + __u32 VendUnused : 31; // Available for future expansion, must be 0 + + // This __u32 defines which IOSP commands are supported over the + // bulk pipe EP1. + + // xxxx Set if device supports: + __u32 IOSPOpen : 1; // 0001 OPEN / OPEN_RSP (Currently must be 1) + __u32 IOSPClose : 1; // 0002 CLOSE + __u32 IOSPChase : 1; // 0004 CHASE / CHASE_RSP + __u32 IOSPSetRxFlow : 1; // 0008 SET_RX_FLOW + __u32 IOSPSetTxFlow : 1; // 0010 SET_TX_FLOW + __u32 IOSPSetXChar : 1; // 0020 SET_XON_CHAR/SET_XOFF_CHAR + __u32 IOSPRxCheck : 1; // 0040 RX_CHECK_REQ/RX_CHECK_RSP + __u32 IOSPSetClrBreak : 1; // 0080 SET_BREAK/CLEAR_BREAK + __u32 IOSPWriteMCR : 1; // 0100 MCR register writes (set/clr DTR/RTS) + __u32 IOSPWriteLCR : 1; // 0200 LCR register writes (wordlen/stop/parity) + __u32 IOSPSetBaudRate : 1; // 0400 setting Baud rate (writes to LCR.80h and DLL/DLM register) + __u32 IOSPDisableIntPipe : 1; // 0800 Do not use the interrupt pipe for TxCredits or RxButesAvailable + __u32 IOSPRxDataAvail : 1; // 1000 Return status of RX Fifo (Data available in Fifo) + __u32 IOSPTxPurge : 1; // 2000 Purge TXBuffer and/or Fifo in Edgeport hardware + __u32 IOSPUnused : 18; // Available for future expansion, must be 0 + + // This __u32 defines which 'general' features are supported + + __u32 TrueEdgeport : 1; // 0001 Set if device is a 'real' Edgeport + // (Used only by driver, NEVER set by an EPiC device) + __u32 GenUnused : 31; // Available for future expansion, must be 0 +}; + +#define EDGE_COMPATIBILITY_MASK0 0x0001 +#define EDGE_COMPATIBILITY_MASK1 0x3FFF +#define EDGE_COMPATIBILITY_MASK2 0x0001 + +struct edge_compatibility_descriptor { + __u8 Length; // Descriptor Length (per USB spec) + __u8 DescType; // Descriptor Type (per USB spec, =DEVICE type) + __u8 EpicVer; // Version of EPiC spec supported + // (Currently must be 1) + __u8 NumPorts; // Number of serial ports supported + __u8 iDownloadFile; // Index of string containing download code filename + // 0=no download, FF=download compiled into driver. + __u8 Unused[3]; // Available for future expansion, must be 0 + // (Currently must be 0). + __u8 MajorVersion; // Firmware version: xx. + __u8 MinorVersion; // yy. + __le16 BuildNumber; // zzzz (LE format) + + // The following structure contains __u32s, with each bit + // specifying whether the EPiC device supports the given + // command or functionality. + struct edge_compatibility_bits Supports; +}; + +// Values for iDownloadFile +#define EDGE_DOWNLOAD_FILE_NONE 0 // No download requested +#define EDGE_DOWNLOAD_FILE_INTERNAL 0xFF // Download the file compiled into driver (930 version) +#define EDGE_DOWNLOAD_FILE_I930 0xFF // Download the file compiled into driver (930 version) +#define EDGE_DOWNLOAD_FILE_80251 0xFE // Download the file compiled into driver (80251 version) + + + +/* + * Special addresses for READ/WRITE_RAM/ROM + */ + +// Version 1 (original) format of DeviceParams +#define EDGE_MANUF_DESC_ADDR_V1 0x00FF7F00 +#define EDGE_MANUF_DESC_LEN_V1 sizeof(EDGE_MANUF_DESCRIPTOR_V1) + +// Version 2 format of DeviceParams. This format is longer (3C0h) +// and starts lower in memory, at the uppermost 1K in ROM. +#define EDGE_MANUF_DESC_ADDR 0x00FF7C00 +#define EDGE_MANUF_DESC_LEN sizeof(struct edge_manuf_descriptor) + +// Boot params descriptor +#define EDGE_BOOT_DESC_ADDR 0x00FF7FC0 +#define EDGE_BOOT_DESC_LEN sizeof(struct edge_boot_descriptor) + +// Define the max block size that may be read or written +// in a read/write RAM/ROM command. +#define MAX_SIZE_REQ_ION_READ_MEM ((__u16)64) +#define MAX_SIZE_REQ_ION_WRITE_MEM ((__u16)64) + + +// +// Notes for the following two ION vendor-specific param descriptors: +// +// 1. These have a standard USB descriptor header so they look like a +// normal descriptor. +// 2. Any strings in the structures are in USB-defined string +// descriptor format, so that they may be separately retrieved, +// if necessary, with a minimum of work on the 930. This also +// requires them to be in UNICODE format, which, for English at +// least, simply means extending each __u8 into a __u16. +// 3. For all fields, 00 means 'uninitialized'. +// 4. All unused areas should be set to 00 for future expansion. +// + +// This structure is ver 2 format. It contains ALL USB descriptors as +// well as the configuration parameters that were in the original V1 +// structure. It is NOT modified when new boot code is downloaded; rather, +// these values are set or modified by manufacturing. It is located at +// xC00-xFBF (length 3C0h) in the ROM. +// This structure is a superset of the v1 structure and is arranged so +// that all of the v1 fields remain at the same address. We are just +// adding more room to the front of the structure to hold the descriptors. +// +// The actual contents of this structure are defined in a 930 assembly +// file, converted to a binary image, and then written by the serialization +// program. The C definition of this structure just defines a dummy +// area for general USB descriptors and the descriptor tables (the root +// descriptor starts at xC00). At the bottom of the structure are the +// fields inherited from the v1 structure. + +#define MAX_SERIALNUMBER_LEN 12 +#define MAX_ASSEMBLYNUMBER_LEN 14 + +struct edge_manuf_descriptor { + + __u16 RootDescTable[0x10]; // C00 Root of descriptor tables (just a placeholder) + __u8 DescriptorArea[0x2E0]; // C20 Descriptors go here, up to 2E0h (just a placeholder) + + // Start of v1-compatible section + __u8 Length; // F00 Desc length for what follows, per USB (= C0h ) + __u8 DescType; // F01 Desc type, per USB (=DEVICE type) + __u8 DescVer; // F02 Desc version/format (currently 2) + __u8 NumRootDescEntries; // F03 # entries in RootDescTable + + __u8 RomSize; // F04 Size of ROM/E2PROM in K + __u8 RamSize; // F05 Size of external RAM in K + __u8 CpuRev; // F06 CPU revision level (chg only if s/w visible) + __u8 BoardRev; // F07 PCB revision level (chg only if s/w visible) + + __u8 NumPorts; // F08 Number of ports + __u8 DescDate[3]; // F09 MM/DD/YY when descriptor template was compiler, + // so host can track changes to USB-only descriptors. + + __u8 SerNumLength; // F0C USB string descriptor len + __u8 SerNumDescType; // F0D USB descriptor type (=STRING type) + __le16 SerialNumber[MAX_SERIALNUMBER_LEN]; // F0E "01-01-000100" Unicode Serial Number + + __u8 AssemblyNumLength; // F26 USB string descriptor len + __u8 AssemblyNumDescType; // F27 USB descriptor type (=STRING type) + __le16 AssemblyNumber[MAX_ASSEMBLYNUMBER_LEN]; // F28 "350-1000-01-A " assembly number + + __u8 OemAssyNumLength; // F44 USB string descriptor len + __u8 OemAssyNumDescType; // F45 USB descriptor type (=STRING type) + __le16 OemAssyNumber[MAX_ASSEMBLYNUMBER_LEN]; // F46 "xxxxxxxxxxxxxx" OEM assembly number + + __u8 ManufDateLength; // F62 USB string descriptor len + __u8 ManufDateDescType; // F63 USB descriptor type (=STRING type) + __le16 ManufDate[6]; // F64 "MMDDYY" manufacturing date + + __u8 Reserved3[0x4D]; // F70 -- unused, set to 0 -- + + __u8 UartType; // FBD Uart Type + __u8 IonPid; // FBE Product ID, == LSB of USB DevDesc.PID + // (Note: Edgeport/4s before 11/98 will have + // 00 here instead of 01) + __u8 IonConfig; // FBF Config byte for ION manufacturing use + // FBF end of structure, total len = 3C0h + +}; + + +#define MANUF_DESC_VER_1 1 // Original definition of MANUF_DESC +#define MANUF_DESC_VER_2 2 // Ver 2, starts at xC00h len 3C0h + + +// Uart Types +// Note: Since this field was added only recently, all Edgeport/4 units +// shipped before 11/98 will have 00 in this field. Therefore, +// both 00 and 01 values mean '654. +#define MANUF_UART_EXAR_654_EARLY 0 // Exar 16C654 in Edgeport/4s before 11/98 +#define MANUF_UART_EXAR_654 1 // Exar 16C654 +#define MANUF_UART_EXAR_2852 2 // Exar 16C2852 + +// +// Note: The CpuRev and BoardRev values do not conform to manufacturing +// revisions; they are to be incremented only when the CPU or hardware +// changes in a software-visible way, such that the 930 software or +// the host driver needs to handle the hardware differently. +// + +// Values of bottom 5 bits of CpuRev & BoardRev for +// Implementation 0 (ie, 930-based) +#define MANUF_CPU_REV_AD4 1 // 930 AD4, with EP1 Rx bug (needs RXSPM) +#define MANUF_CPU_REV_AD5 2 // 930 AD5, with above bug (supposedly) fixed +#define MANUF_CPU_80251 0x20 // Intel 80251 + + +#define MANUF_BOARD_REV_A 1 // Original version, == Manuf Rev A +#define MANUF_BOARD_REV_B 2 // Manuf Rev B, wakeup interrupt works +#define MANUF_BOARD_REV_C 3 // Manuf Rev C, 2/4 ports, rs232/rs422 +#define MANUF_BOARD_REV_GENERATION_2 0x20 // Second generaiton edgeport + + +// Values of bottom 5 bits of CpuRev & BoardRev for +// Implementation 1 (ie, 251+Netchip-based) +#define MANUF_CPU_REV_1 1 // C251TB Rev 1 (Need actual Intel rev here) + +#define MANUF_BOARD_REV_A 1 // First rev of 251+Netchip design + +#define MANUF_SERNUM_LENGTH sizeof(((struct edge_manuf_descriptor *)0)->SerialNumber) +#define MANUF_ASSYNUM_LENGTH sizeof(((struct edge_manuf_descriptor *)0)->AssemblyNumber) +#define MANUF_OEMASSYNUM_LENGTH sizeof(((struct edge_manuf_descriptor *)0)->OemAssyNumber) +#define MANUF_MANUFDATE_LENGTH sizeof(((struct edge_manuf_descriptor *)0)->ManufDate) + +#define MANUF_ION_CONFIG_DIAG_NO_LOOP 0x20 // As below but no ext loopback test +#define MANUF_ION_CONFIG_DIAG 0x40 // 930 based device: 1=Run h/w diags, 0=norm + // TIUMP Device : 1=IONSERIAL needs to run Final Test +#define MANUF_ION_CONFIG_MASTER 0x80 // 930 based device: 1=Master mode, 0=Normal + // TIUMP Device : 1=First device on a multi TIUMP Device + +// +// This structure describes parameters for the boot code, and +// is programmed along with new boot code. These are values +// which are specific to a given build of the boot code. It +// is exactly 64 bytes long and is fixed at address FF:xFC0 +// - FF:xFFF. Note that the 930-mandated UCONFIG bytes are +// included in this structure. +// +struct edge_boot_descriptor { + __u8 Length; // C0 Desc length, per USB (= 40h) + __u8 DescType; // C1 Desc type, per USB (= DEVICE type) + __u8 DescVer; // C2 Desc version/format + __u8 Reserved1; // C3 -- unused, set to 0 -- + + __le16 BootCodeLength; // C4 Boot code goes from FF:0000 to FF:(len-1) + // (LE format) + + __u8 MajorVersion; // C6 Firmware version: xx. + __u8 MinorVersion; // C7 yy. + __le16 BuildNumber; // C8 zzzz (LE format) + + __u16 EnumRootDescTable; // CA Root of ROM-based descriptor table + __u8 NumDescTypes; // CC Number of supported descriptor types + + __u8 Reserved4; // CD Fix Compiler Packing + + __le16 Capabilities; // CE-CF Capabilities flags (LE format) + __u8 Reserved2[0x28]; // D0 -- unused, set to 0 -- + __u8 UConfig0; // F8 930-defined CPU configuration byte 0 + __u8 UConfig1; // F9 930-defined CPU configuration byte 1 + __u8 Reserved3[6]; // FA -- unused, set to 0 -- + // FF end of structure, total len = 80 +}; + + +#define BOOT_DESC_VER_1 1 // Original definition of BOOT_PARAMS +#define BOOT_DESC_VER_2 2 // 2nd definition, descriptors not included in boot + + + // Capabilities flags + +#define BOOT_CAP_RESET_CMD 0x0001 // If set, boot correctly supports ION_RESET_DEVICE + + +/************************************************************************ + T I U M P D E F I N I T I O N S + ***********************************************************************/ + +// Chip definitions in I2C +#define UMP5152 0x52 +#define UMP3410 0x10 + + +//************************************************************************ +// TI I2C Format Definitions +//************************************************************************ +#define I2C_DESC_TYPE_INFO_BASIC 0x01 +#define I2C_DESC_TYPE_FIRMWARE_BASIC 0x02 +#define I2C_DESC_TYPE_DEVICE 0x03 +#define I2C_DESC_TYPE_CONFIG 0x04 +#define I2C_DESC_TYPE_STRING 0x05 +#define I2C_DESC_TYPE_FIRMWARE_AUTO 0x07 // for 3410 download +#define I2C_DESC_TYPE_CONFIG_KLUDGE 0x14 // for 3410 +#define I2C_DESC_TYPE_WATCHPORT_VERSION 0x15 // firmware version number for watchport +#define I2C_DESC_TYPE_WATCHPORT_CALIBRATION_DATA 0x16 // Watchport Calibration Data + +#define I2C_DESC_TYPE_FIRMWARE_BLANK 0xf2 + +// Special section defined by ION +#define I2C_DESC_TYPE_ION 0 // Not defined by TI + + +struct ti_i2c_desc { + __u8 Type; // Type of descriptor + __le16 Size; // Size of data only not including header + __u8 CheckSum; // Checksum (8 bit sum of data only) + __u8 Data[0]; // Data starts here +} __attribute__((packed)); + +// for 5152 devices only (type 2 record) +// for 3410 the version is stored in the WATCHPORT_FIRMWARE_VERSION descriptor +struct ti_i2c_firmware_rec { + __u8 Ver_Major; // Firmware Major version number + __u8 Ver_Minor; // Firmware Minor version number + __u8 Data[0]; // Download starts here +} __attribute__((packed)); + + +struct watchport_firmware_version { +// Added 2 bytes for version number + __u8 Version_Major; // Download Version (for Watchport) + __u8 Version_Minor; +} __attribute__((packed)); + + +// Structure of header of download image in fw_down.h +struct ti_i2c_image_header { + __le16 Length; + __u8 CheckSum; +} __attribute__((packed)); + +struct ti_basic_descriptor { + __u8 Power; // Self powered + // bit 7: 1 - power switching supported + // 0 - power switching not supported + // + // bit 0: 1 - self powered + // 0 - bus powered + // + // + __u16 HubVid; // VID HUB + __u16 HubPid; // PID HUB + __u16 DevPid; // PID Edgeport + __u8 HubTime; // Time for power on to power good + __u8 HubCurrent; // HUB Current = 100ma +} __attribute__((packed)); + + +// CPU / Board Rev Definitions +#define TI_CPU_REV_5052 2 // 5052 based edgeports +#define TI_CPU_REV_3410 3 // 3410 based edgeports + +#define TI_BOARD_REV_TI_EP 0 // Basic ti based edgeport +#define TI_BOARD_REV_COMPACT 1 // Compact board +#define TI_BOARD_REV_WATCHPORT 2 // Watchport + + +#define TI_GET_CPU_REVISION(x) (__u8)((((x)>>4)&0x0f)) +#define TI_GET_BOARD_REVISION(x) (__u8)(((x)&0x0f)) + +#define TI_I2C_SIZE_MASK 0x1f // 5 bits +#define TI_GET_I2C_SIZE(x) ((((x) & TI_I2C_SIZE_MASK)+1)*256) + +#define TI_MAX_I2C_SIZE (16 * 1024) + +#define TI_MANUF_VERSION_0 0 + +// IonConig2 flags +#define TI_CONFIG2_RS232 0x01 +#define TI_CONFIG2_RS422 0x02 +#define TI_CONFIG2_RS485 0x04 +#define TI_CONFIG2_SWITCHABLE 0x08 + +#define TI_CONFIG2_WATCHPORT 0x10 + + +struct edge_ti_manuf_descriptor { + __u8 IonConfig; // Config byte for ION manufacturing use + __u8 IonConfig2; // Expansion + __u8 Version; // Version + __u8 CpuRev_BoardRev; // CPU revision level (0xF0) and Board Rev Level (0x0F) + __u8 NumPorts; // Number of ports for this UMP + __u8 NumVirtualPorts; // Number of Virtual ports + __u8 HubConfig1; // Used to configure the Hub + __u8 HubConfig2; // Used to configure the Hub + __u8 TotalPorts; // Total Number of Com Ports for the entire device (All UMPs) + __u8 Reserved; // Reserved +} __attribute__((packed)); + + +#endif // if !defined(_USBVEND_H) diff --git a/kernel/drivers/usb/serial/ipaq.c b/kernel/drivers/usb/serial/ipaq.c new file mode 100644 index 000000000..f51a5d52c --- /dev/null +++ b/kernel/drivers/usb/serial/ipaq.c @@ -0,0 +1,618 @@ +/* + * USB Compaq iPAQ driver + * + * Copyright (C) 2001 - 2002 + * Ganesh Varadarajan <ganesh@veritas.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +#define KP_RETRIES 100 + +#define DRIVER_AUTHOR "Ganesh Varadarajan <ganesh@veritas.com>" +#define DRIVER_DESC "USB PocketPC PDA driver" + +static int connect_retries = KP_RETRIES; +static int initial_wait; + +/* Function prototypes for an ipaq */ +static int ipaq_open(struct tty_struct *tty, + struct usb_serial_port *port); +static int ipaq_calc_num_ports(struct usb_serial *serial); +static int ipaq_startup(struct usb_serial *serial); + +static const struct usb_device_id ipaq_id_table[] = { + { USB_DEVICE(0x0104, 0x00BE) }, /* Socket USB Sync */ + { USB_DEVICE(0x03F0, 0x1016) }, /* HP USB Sync */ + { USB_DEVICE(0x03F0, 0x1116) }, /* HP USB Sync 1611 */ + { USB_DEVICE(0x03F0, 0x1216) }, /* HP USB Sync 1612 */ + { USB_DEVICE(0x03F0, 0x2016) }, /* HP USB Sync 1620 */ + { USB_DEVICE(0x03F0, 0x2116) }, /* HP USB Sync 1621 */ + { USB_DEVICE(0x03F0, 0x2216) }, /* HP USB Sync 1622 */ + { USB_DEVICE(0x03F0, 0x3016) }, /* HP USB Sync 1630 */ + { USB_DEVICE(0x03F0, 0x3116) }, /* HP USB Sync 1631 */ + { USB_DEVICE(0x03F0, 0x3216) }, /* HP USB Sync 1632 */ + { USB_DEVICE(0x03F0, 0x4016) }, /* HP USB Sync 1640 */ + { USB_DEVICE(0x03F0, 0x4116) }, /* HP USB Sync 1641 */ + { USB_DEVICE(0x03F0, 0x4216) }, /* HP USB Sync 1642 */ + { USB_DEVICE(0x03F0, 0x5016) }, /* HP USB Sync 1650 */ + { USB_DEVICE(0x03F0, 0x5116) }, /* HP USB Sync 1651 */ + { USB_DEVICE(0x03F0, 0x5216) }, /* HP USB Sync 1652 */ + { USB_DEVICE(0x0409, 0x00D5) }, /* NEC USB Sync */ + { USB_DEVICE(0x0409, 0x00D6) }, /* NEC USB Sync */ + { USB_DEVICE(0x0409, 0x00D7) }, /* NEC USB Sync */ + { USB_DEVICE(0x0409, 0x8024) }, /* NEC USB Sync */ + { USB_DEVICE(0x0409, 0x8025) }, /* NEC USB Sync */ + { USB_DEVICE(0x043E, 0x9C01) }, /* LGE USB Sync */ + { USB_DEVICE(0x045E, 0x00CE) }, /* Microsoft USB Sync */ + { USB_DEVICE(0x045E, 0x0400) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x0401) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x0402) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x0403) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x0404) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x0405) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x0406) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x0407) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x0408) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x0409) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x040A) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x040B) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x040C) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x040D) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x040E) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x040F) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x0410) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x0411) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x0412) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x0413) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x0414) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x0415) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x0416) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x0417) }, /* Windows Powered Pocket PC 2002 */ + { USB_DEVICE(0x045E, 0x0432) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0433) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0434) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0435) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0436) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0437) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0438) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0439) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x043A) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x043B) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x043C) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x043D) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x043E) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x043F) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0440) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0441) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0442) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0443) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0444) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0445) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0446) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0447) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0448) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0449) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x044A) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x044B) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x044C) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x044D) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x044E) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x044F) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0450) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0451) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0452) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0453) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0454) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0455) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0456) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0457) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0458) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0459) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x045A) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x045B) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x045C) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x045D) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x045E) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x045F) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0460) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0461) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0462) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0463) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0464) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0465) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0466) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0467) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0468) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0469) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x046A) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x046B) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x046C) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x046D) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x046E) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x046F) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0470) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0471) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0472) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0473) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0474) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0475) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0476) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0477) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0478) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x0479) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x047A) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x047B) }, /* Windows Powered Pocket PC 2003 */ + { USB_DEVICE(0x045E, 0x04C8) }, /* Windows Powered Smartphone 2002 */ + { USB_DEVICE(0x045E, 0x04C9) }, /* Windows Powered Smartphone 2002 */ + { USB_DEVICE(0x045E, 0x04CA) }, /* Windows Powered Smartphone 2002 */ + { USB_DEVICE(0x045E, 0x04CB) }, /* Windows Powered Smartphone 2002 */ + { USB_DEVICE(0x045E, 0x04CC) }, /* Windows Powered Smartphone 2002 */ + { USB_DEVICE(0x045E, 0x04CD) }, /* Windows Powered Smartphone 2002 */ + { USB_DEVICE(0x045E, 0x04CE) }, /* Windows Powered Smartphone 2002 */ + { USB_DEVICE(0x045E, 0x04D7) }, /* Windows Powered Smartphone 2003 */ + { USB_DEVICE(0x045E, 0x04D8) }, /* Windows Powered Smartphone 2003 */ + { USB_DEVICE(0x045E, 0x04D9) }, /* Windows Powered Smartphone 2003 */ + { USB_DEVICE(0x045E, 0x04DA) }, /* Windows Powered Smartphone 2003 */ + { USB_DEVICE(0x045E, 0x04DB) }, /* Windows Powered Smartphone 2003 */ + { USB_DEVICE(0x045E, 0x04DC) }, /* Windows Powered Smartphone 2003 */ + { USB_DEVICE(0x045E, 0x04DD) }, /* Windows Powered Smartphone 2003 */ + { USB_DEVICE(0x045E, 0x04DE) }, /* Windows Powered Smartphone 2003 */ + { USB_DEVICE(0x045E, 0x04DF) }, /* Windows Powered Smartphone 2003 */ + { USB_DEVICE(0x045E, 0x04E0) }, /* Windows Powered Smartphone 2003 */ + { USB_DEVICE(0x045E, 0x04E1) }, /* Windows Powered Smartphone 2003 */ + { USB_DEVICE(0x045E, 0x04E2) }, /* Windows Powered Smartphone 2003 */ + { USB_DEVICE(0x045E, 0x04E3) }, /* Windows Powered Smartphone 2003 */ + { USB_DEVICE(0x045E, 0x04E4) }, /* Windows Powered Smartphone 2003 */ + { USB_DEVICE(0x045E, 0x04E5) }, /* Windows Powered Smartphone 2003 */ + { USB_DEVICE(0x045E, 0x04E6) }, /* Windows Powered Smartphone 2003 */ + { USB_DEVICE(0x045E, 0x04E7) }, /* Windows Powered Smartphone 2003 */ + { USB_DEVICE(0x045E, 0x04E8) }, /* Windows Powered Smartphone 2003 */ + { USB_DEVICE(0x045E, 0x04E9) }, /* Windows Powered Smartphone 2003 */ + { USB_DEVICE(0x045E, 0x04EA) }, /* Windows Powered Smartphone 2003 */ + { USB_DEVICE(0x049F, 0x0003) }, /* Compaq iPAQ USB Sync */ + { USB_DEVICE(0x049F, 0x0032) }, /* Compaq iPAQ USB Sync */ + { USB_DEVICE(0x04A4, 0x0014) }, /* Hitachi USB Sync */ + { USB_DEVICE(0x04AD, 0x0301) }, /* USB Sync 0301 */ + { USB_DEVICE(0x04AD, 0x0302) }, /* USB Sync 0302 */ + { USB_DEVICE(0x04AD, 0x0303) }, /* USB Sync 0303 */ + { USB_DEVICE(0x04AD, 0x0306) }, /* GPS Pocket PC USB Sync */ + { USB_DEVICE(0x04B7, 0x0531) }, /* MyGuide 7000 XL USB Sync */ + { USB_DEVICE(0x04C5, 0x1058) }, /* FUJITSU USB Sync */ + { USB_DEVICE(0x04C5, 0x1079) }, /* FUJITSU USB Sync */ + { USB_DEVICE(0x04DA, 0x2500) }, /* Panasonic USB Sync */ + { USB_DEVICE(0x04DD, 0x9102) }, /* SHARP WS003SH USB Modem */ + { USB_DEVICE(0x04DD, 0x9121) }, /* SHARP WS004SH USB Modem */ + { USB_DEVICE(0x04DD, 0x9123) }, /* SHARP WS007SH USB Modem */ + { USB_DEVICE(0x04DD, 0x9151) }, /* SHARP S01SH USB Modem */ + { USB_DEVICE(0x04DD, 0x91AC) }, /* SHARP WS011SH USB Modem */ + { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x5F03) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x5F04) }, /* Samsung NEXiO USB Sync */ + { USB_DEVICE(0x04E8, 0x6611) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6613) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6615) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6617) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6619) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x661B) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x662E) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6630) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04E8, 0x6632) }, /* Samsung MITs USB Sync */ + { USB_DEVICE(0x04f1, 0x3011) }, /* JVC USB Sync */ + { USB_DEVICE(0x04F1, 0x3012) }, /* JVC USB Sync */ + { USB_DEVICE(0x0502, 0x1631) }, /* c10 Series */ + { USB_DEVICE(0x0502, 0x1632) }, /* c20 Series */ + { USB_DEVICE(0x0502, 0x16E1) }, /* Acer n10 Handheld USB Sync */ + { USB_DEVICE(0x0502, 0x16E2) }, /* Acer n20 Handheld USB Sync */ + { USB_DEVICE(0x0502, 0x16E3) }, /* Acer n30 Handheld USB Sync */ + { USB_DEVICE(0x0536, 0x01A0) }, /* HHP PDT */ + { USB_DEVICE(0x0543, 0x0ED9) }, /* ViewSonic Color Pocket PC V35 */ + { USB_DEVICE(0x0543, 0x1527) }, /* ViewSonic Color Pocket PC V36 */ + { USB_DEVICE(0x0543, 0x1529) }, /* ViewSonic Color Pocket PC V37 */ + { USB_DEVICE(0x0543, 0x152B) }, /* ViewSonic Color Pocket PC V38 */ + { USB_DEVICE(0x0543, 0x152E) }, /* ViewSonic Pocket PC */ + { USB_DEVICE(0x0543, 0x1921) }, /* ViewSonic Communicator Pocket PC */ + { USB_DEVICE(0x0543, 0x1922) }, /* ViewSonic Smartphone */ + { USB_DEVICE(0x0543, 0x1923) }, /* ViewSonic Pocket PC V30 */ + { USB_DEVICE(0x05E0, 0x2000) }, /* Symbol USB Sync */ + { USB_DEVICE(0x05E0, 0x2001) }, /* Symbol USB Sync 0x2001 */ + { USB_DEVICE(0x05E0, 0x2002) }, /* Symbol USB Sync 0x2002 */ + { USB_DEVICE(0x05E0, 0x2003) }, /* Symbol USB Sync 0x2003 */ + { USB_DEVICE(0x05E0, 0x2004) }, /* Symbol USB Sync 0x2004 */ + { USB_DEVICE(0x05E0, 0x2005) }, /* Symbol USB Sync 0x2005 */ + { USB_DEVICE(0x05E0, 0x2006) }, /* Symbol USB Sync 0x2006 */ + { USB_DEVICE(0x05E0, 0x2007) }, /* Symbol USB Sync 0x2007 */ + { USB_DEVICE(0x05E0, 0x2008) }, /* Symbol USB Sync 0x2008 */ + { USB_DEVICE(0x05E0, 0x2009) }, /* Symbol USB Sync 0x2009 */ + { USB_DEVICE(0x05E0, 0x200A) }, /* Symbol USB Sync 0x200A */ + { USB_DEVICE(0x067E, 0x1001) }, /* Intermec Mobile Computer */ + { USB_DEVICE(0x07CF, 0x2001) }, /* CASIO USB Sync 2001 */ + { USB_DEVICE(0x07CF, 0x2002) }, /* CASIO USB Sync 2002 */ + { USB_DEVICE(0x07CF, 0x2003) }, /* CASIO USB Sync 2003 */ + { USB_DEVICE(0x0930, 0x0700) }, /* TOSHIBA USB Sync 0700 */ + { USB_DEVICE(0x0930, 0x0705) }, /* TOSHIBA Pocket PC e310 */ + { USB_DEVICE(0x0930, 0x0706) }, /* TOSHIBA Pocket PC e740 */ + { USB_DEVICE(0x0930, 0x0707) }, /* TOSHIBA Pocket PC e330 Series */ + { USB_DEVICE(0x0930, 0x0708) }, /* TOSHIBA Pocket PC e350 Series */ + { USB_DEVICE(0x0930, 0x0709) }, /* TOSHIBA Pocket PC e750 Series */ + { USB_DEVICE(0x0930, 0x070A) }, /* TOSHIBA Pocket PC e400 Series */ + { USB_DEVICE(0x0930, 0x070B) }, /* TOSHIBA Pocket PC e800 Series */ + { USB_DEVICE(0x094B, 0x0001) }, /* Linkup Systems USB Sync */ + { USB_DEVICE(0x0960, 0x0065) }, /* BCOM USB Sync 0065 */ + { USB_DEVICE(0x0960, 0x0066) }, /* BCOM USB Sync 0066 */ + { USB_DEVICE(0x0960, 0x0067) }, /* BCOM USB Sync 0067 */ + { USB_DEVICE(0x0961, 0x0010) }, /* Portatec USB Sync */ + { USB_DEVICE(0x099E, 0x0052) }, /* Trimble GeoExplorer */ + { USB_DEVICE(0x099E, 0x4000) }, /* TDS Data Collector */ + { USB_DEVICE(0x0B05, 0x4200) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x4201) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x4202) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x420F) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x9200) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0B05, 0x9202) }, /* ASUS USB Sync */ + { USB_DEVICE(0x0BB4, 0x00CE) }, /* HTC USB Sync */ + { USB_DEVICE(0x0BB4, 0x00CF) }, /* HTC USB Modem */ + { USB_DEVICE(0x0BB4, 0x0A01) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A02) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A03) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A04) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A05) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A06) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A07) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A08) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A09) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A0A) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A0B) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A0C) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A0D) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A0E) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A0F) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A10) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A11) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A12) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A13) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A14) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A15) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A16) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A17) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A18) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A19) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A1A) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A1B) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A1C) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A1D) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A1E) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A1F) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A20) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A21) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A22) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A23) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A24) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A25) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A26) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A27) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A28) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A29) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A2A) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A2B) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A2C) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A2D) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A2E) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A2F) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A30) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A31) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A32) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A33) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A34) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A35) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A36) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A37) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A38) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A39) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A3A) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A3B) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A3C) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A3D) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A3E) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A3F) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A40) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A41) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A42) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A43) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A44) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A45) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A46) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A47) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A48) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A49) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A4A) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A4B) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A4C) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A4D) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A4E) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A4F) }, /* PocketPC USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A50) }, /* HTC SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A51) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A52) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A53) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A54) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A55) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A56) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A57) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A58) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A59) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A5A) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A5B) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A5C) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A5D) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A5E) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A5F) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A60) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A61) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A62) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A63) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A64) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A65) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A66) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A67) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A68) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A69) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A6A) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A6B) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A6C) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A6D) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A6E) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A6F) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A70) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A71) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A72) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A73) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A74) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A75) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A76) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A77) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A78) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A79) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A7A) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A7B) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A7C) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A7D) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A7E) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A7F) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A80) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A81) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A82) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A83) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A84) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A85) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A86) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A87) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A88) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A89) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A8A) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A8B) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A8C) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A8D) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A8E) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A8F) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A90) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A91) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A92) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A93) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A94) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A95) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A96) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A97) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A98) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A99) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A9A) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A9B) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A9C) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A9D) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A9E) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0A9F) }, /* SmartPhone USB Sync */ + { USB_DEVICE(0x0BB4, 0x0BCE) }, /* "High Tech Computer Corp" */ + { USB_DEVICE(0x0BF8, 0x1001) }, /* Fujitsu Siemens Computers USB Sync */ + { USB_DEVICE(0x0C44, 0x03A2) }, /* Motorola iDEN Smartphone */ + { USB_DEVICE(0x0C8E, 0x6000) }, /* Cesscom Luxian Series */ + { USB_DEVICE(0x0CAD, 0x9001) }, /* Motorola PowerPad Pocket PC Device */ + { USB_DEVICE(0x0F4E, 0x0200) }, /* Freedom Scientific USB Sync */ + { USB_DEVICE(0x0F98, 0x0201) }, /* Cyberbank USB Sync */ + { USB_DEVICE(0x0FB8, 0x3001) }, /* Wistron USB Sync */ + { USB_DEVICE(0x0FB8, 0x3002) }, /* Wistron USB Sync */ + { USB_DEVICE(0x0FB8, 0x3003) }, /* Wistron USB Sync */ + { USB_DEVICE(0x0FB8, 0x4001) }, /* Wistron USB Sync */ + { USB_DEVICE(0x1066, 0x00CE) }, /* E-TEN USB Sync */ + { USB_DEVICE(0x1066, 0x0300) }, /* E-TEN P3XX Pocket PC */ + { USB_DEVICE(0x1066, 0x0500) }, /* E-TEN P5XX Pocket PC */ + { USB_DEVICE(0x1066, 0x0600) }, /* E-TEN P6XX Pocket PC */ + { USB_DEVICE(0x1066, 0x0700) }, /* E-TEN P7XX Pocket PC */ + { USB_DEVICE(0x1114, 0x0001) }, /* Psion Teklogix Sync 753x */ + { USB_DEVICE(0x1114, 0x0004) }, /* Psion Teklogix Sync netBookPro */ + { USB_DEVICE(0x1114, 0x0006) }, /* Psion Teklogix Sync 7525 */ + { USB_DEVICE(0x1182, 0x1388) }, /* VES USB Sync */ + { USB_DEVICE(0x11D9, 0x1002) }, /* Rugged Pocket PC 2003 */ + { USB_DEVICE(0x11D9, 0x1003) }, /* Rugged Pocket PC 2003 */ + { USB_DEVICE(0x1231, 0xCE01) }, /* USB Sync 03 */ + { USB_DEVICE(0x1231, 0xCE02) }, /* USB Sync 03 */ + { USB_DEVICE(0x1690, 0x0601) }, /* Askey USB Sync */ + { USB_DEVICE(0x22B8, 0x4204) }, /* Motorola MPx200 Smartphone */ + { USB_DEVICE(0x22B8, 0x4214) }, /* Motorola MPc GSM */ + { USB_DEVICE(0x22B8, 0x4224) }, /* Motorola MPx220 Smartphone */ + { USB_DEVICE(0x22B8, 0x4234) }, /* Motorola MPc CDMA */ + { USB_DEVICE(0x22B8, 0x4244) }, /* Motorola MPx100 Smartphone */ + { USB_DEVICE(0x3340, 0x011C) }, /* Mio DigiWalker PPC StrongARM */ + { USB_DEVICE(0x3340, 0x0326) }, /* Mio DigiWalker 338 */ + { USB_DEVICE(0x3340, 0x0426) }, /* Mio DigiWalker 338 */ + { USB_DEVICE(0x3340, 0x043A) }, /* Mio DigiWalker USB Sync */ + { USB_DEVICE(0x3340, 0x051C) }, /* MiTAC USB Sync 528 */ + { USB_DEVICE(0x3340, 0x053A) }, /* Mio DigiWalker SmartPhone USB Sync */ + { USB_DEVICE(0x3340, 0x071C) }, /* MiTAC USB Sync */ + { USB_DEVICE(0x3340, 0x0B1C) }, /* Generic PPC StrongARM */ + { USB_DEVICE(0x3340, 0x0E3A) }, /* Generic PPC USB Sync */ + { USB_DEVICE(0x3340, 0x0F1C) }, /* Itautec USB Sync */ + { USB_DEVICE(0x3340, 0x0F3A) }, /* Generic SmartPhone USB Sync */ + { USB_DEVICE(0x3340, 0x1326) }, /* Itautec USB Sync */ + { USB_DEVICE(0x3340, 0x191C) }, /* YAKUMO USB Sync */ + { USB_DEVICE(0x3340, 0x2326) }, /* Vobis USB Sync */ + { USB_DEVICE(0x3340, 0x3326) }, /* MEDION Winodws Moble USB Sync */ + { USB_DEVICE(0x3708, 0x20CE) }, /* Legend USB Sync */ + { USB_DEVICE(0x3708, 0x21CE) }, /* Lenovo USB Sync */ + { USB_DEVICE(0x4113, 0x0210) }, /* Mobile Media Technology USB Sync */ + { USB_DEVICE(0x4113, 0x0211) }, /* Mobile Media Technology USB Sync */ + { USB_DEVICE(0x4113, 0x0400) }, /* Mobile Media Technology USB Sync */ + { USB_DEVICE(0x4113, 0x0410) }, /* Mobile Media Technology USB Sync */ + { USB_DEVICE(0x413C, 0x4001) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4002) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4003) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4004) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4005) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4006) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4007) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4008) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */ + { USB_DEVICE(0x4505, 0x0010) }, /* Smartphone */ + { USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */ + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, ipaq_id_table); + + +/* All of the device info needed for the Compaq iPAQ */ +static struct usb_serial_driver ipaq_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ipaq", + }, + .description = "PocketPC PDA", + .id_table = ipaq_id_table, + .bulk_in_size = 256, + .bulk_out_size = 256, + .open = ipaq_open, + .attach = ipaq_startup, + .calc_num_ports = ipaq_calc_num_ports, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &ipaq_device, NULL +}; + +static int ipaq_open(struct tty_struct *tty, + struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + int result = 0; + int retries = connect_retries; + + msleep(1000*initial_wait); + + /* + * Send out control message observed in win98 sniffs. Not sure what + * it does, but from empirical observations, it seems that the device + * will start the chat sequence once one of these messages gets + * through. Since this has a reasonably high failure rate, we retry + * several times. + */ + while (retries--) { + result = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), 0x22, 0x21, + 0x1, 0, NULL, 0, 100); + if (!result) + break; + + msleep(1000); + } + if (!retries && result) { + dev_err(&port->dev, "%s - failed doing control urb, error %d\n", + __func__, result); + return result; + } + + return usb_serial_generic_open(tty, port); +} + +static int ipaq_calc_num_ports(struct usb_serial *serial) +{ + /* + * some devices have 3 endpoints, the 3rd of which + * must be ignored as it would make the core + * create a second port which oopses when used + */ + int ipaq_num_ports = 1; + + dev_dbg(&serial->dev->dev, "%s - numberofendpoints: %d\n", __func__, + (int)serial->interface->cur_altsetting->desc.bNumEndpoints); + + /* + * a few devices have 4 endpoints, seemingly Yakuma devices, + * and we need the second pair, so let them have 2 ports + * + * TODO: can we drop port 1 ? + */ + if (serial->interface->cur_altsetting->desc.bNumEndpoints > 3) { + ipaq_num_ports = 2; + } + + return ipaq_num_ports; +} + + +static int ipaq_startup(struct usb_serial *serial) +{ + /* Some of the devices in ipaq_id_table[] are composite, and we + * shouldn't bind to all the interfaces. This test will rule out + * some obviously invalid possibilities. + */ + if (serial->num_bulk_in < serial->num_ports || + serial->num_bulk_out < serial->num_ports) + return -ENODEV; + + if (serial->dev->actconfig->desc.bConfigurationValue != 1) { + /* + * FIXME: HP iPaq rx3715, possibly others, have 1 config that + * is labeled as 2 + */ + + dev_err(&serial->dev->dev, "active config #%d != 1 ??\n", + serial->dev->actconfig->desc.bConfigurationValue); + return -ENODEV; + } + + dev_dbg(&serial->dev->dev, + "%s - iPAQ module configured for %d ports\n", __func__, + serial->num_ports); + + return usb_reset_configuration(serial->dev); +} + +module_usb_serial_driver(serial_drivers, ipaq_id_table); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +module_param(connect_retries, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(connect_retries, + "Maximum number of connect retries (one second each)"); + +module_param(initial_wait, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(initial_wait, + "Time to wait before attempting a connection (in seconds)"); diff --git a/kernel/drivers/usb/serial/ipw.c b/kernel/drivers/usb/serial/ipw.c new file mode 100644 index 000000000..8b1cf18a6 --- /dev/null +++ b/kernel/drivers/usb/serial/ipw.c @@ -0,0 +1,317 @@ +/* + * IPWireless 3G UMTS TDD Modem driver (USB connected) + * + * Copyright (C) 2004 Roelf Diedericks <roelfd@inet.co.za> + * Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * All information about the device was acquired using SnoopyPro + * on MSFT's O/S, and examing the MSFT drivers' debug output + * (insanely left _on_ in the enduser version) + * + * It was written out of frustration with the IPWireless USB modem + * supplied by Axity3G/Sentech South Africa not supporting + * Linux whatsoever. + * + * Nobody provided any proprietary information that was not already + * available for this device. + * + * The modem adheres to the "3GPP TS 27.007 AT command set for 3G + * User Equipment (UE)" standard, available from + * http://www.3gpp.org/ftp/Specs/html-info/27007.htm + * + * The code was only tested the IPWireless handheld modem distributed + * in South Africa by Sentech. + * + * It may work for Woosh Inc in .nz too, as it appears they use the + * same kit. + * + * There is still some work to be done in terms of handling + * DCD, DTR, RTS, CTS which are currently faked. + * It's good enough for PPP at this point. It's based off all kinds of + * code found in usb/serial and usb/class + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/uaccess.h> +#include "usb-wwan.h" + +#define DRIVER_AUTHOR "Roelf Diedericks" +#define DRIVER_DESC "IPWireless tty driver" + +#define IPW_TTY_MAJOR 240 /* real device node major id, experimental range */ +#define IPW_TTY_MINORS 256 /* we support 256 devices, dunno why, it'd be insane :) */ + +#define USB_IPW_MAGIC 0x6d02 /* magic number for ipw struct */ + + +/* Message sizes */ +#define EVENT_BUFFER_SIZE 0xFF +#define CHAR2INT16(c1, c0) (((u32)((c1) & 0xff) << 8) + (u32)((c0) & 0xff)) + +/* vendor/product pairs that are known work with this driver*/ +#define IPW_VID 0x0bc3 +#define IPW_PID 0x0001 + + +/* Vendor commands: */ + +/* baud rates */ +enum { + ipw_sio_b256000 = 0x000e, + ipw_sio_b128000 = 0x001d, + ipw_sio_b115200 = 0x0020, + ipw_sio_b57600 = 0x0040, + ipw_sio_b56000 = 0x0042, + ipw_sio_b38400 = 0x0060, + ipw_sio_b19200 = 0x00c0, + ipw_sio_b14400 = 0x0100, + ipw_sio_b9600 = 0x0180, + ipw_sio_b4800 = 0x0300, + ipw_sio_b2400 = 0x0600, + ipw_sio_b1200 = 0x0c00, + ipw_sio_b600 = 0x1800 +}; + +/* data bits */ +#define ipw_dtb_7 0x700 +#define ipw_dtb_8 0x810 /* ok so the define is misleading, I know, but forces 8,n,1 */ + /* I mean, is there a point to any other setting these days? :) */ + +/* usb control request types : */ +#define IPW_SIO_RXCTL 0x00 /* control bulk rx channel transmissions, value=1/0 (on/off) */ +#define IPW_SIO_SET_BAUD 0x01 /* set baud, value=requested ipw_sio_bxxxx */ +#define IPW_SIO_SET_LINE 0x03 /* set databits, parity. value=ipw_dtb_x */ +#define IPW_SIO_SET_PIN 0x03 /* set/clear dtr/rts value=ipw_pin_xxx */ +#define IPW_SIO_POLL 0x08 /* get serial port status byte, call with value=0 */ +#define IPW_SIO_INIT 0x11 /* initializes ? value=0 (appears as first thing todo on open) */ +#define IPW_SIO_PURGE 0x12 /* purge all transmissions?, call with value=numchar_to_purge */ +#define IPW_SIO_HANDFLOW 0x13 /* set xon/xoff limits value=0, and a buffer of 0x10 bytes */ +#define IPW_SIO_SETCHARS 0x13 /* set the flowcontrol special chars, value=0, buf=6 bytes, */ + /* last 2 bytes contain flowcontrol chars e.g. 00 00 00 00 11 13 */ + +/* values used for request IPW_SIO_SET_PIN */ +#define IPW_PIN_SETDTR 0x101 +#define IPW_PIN_SETRTS 0x202 +#define IPW_PIN_CLRDTR 0x100 +#define IPW_PIN_CLRRTS 0x200 /* unconfirmed */ + +/* values used for request IPW_SIO_RXCTL */ +#define IPW_RXBULK_ON 1 +#define IPW_RXBULK_OFF 0 + +/* various 16 byte hardcoded transferbuffers used by flow control */ +#define IPW_BYTES_FLOWINIT { 0x01, 0, 0, 0, 0x40, 0, 0, 0, \ + 0, 0, 0, 0, 0, 0, 0, 0 } + +/* Interpretation of modem status lines */ +/* These need sorting out by individually connecting pins and checking + * results. FIXME! + * When data is being sent we see 0x30 in the lower byte; this must + * contain DSR and CTS ... + */ +#define IPW_DSR ((1<<4) | (1<<5)) +#define IPW_CTS ((1<<5) | (1<<4)) + +#define IPW_WANTS_TO_SEND 0x30 + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(IPW_VID, IPW_PID) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static int ipw_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct usb_device *udev = port->serial->dev; + struct device *dev = &port->dev; + u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT; + u8 *buf_flow_init; + int result; + + buf_flow_init = kmemdup(buf_flow_static, 16, GFP_KERNEL); + if (!buf_flow_init) + return -ENOMEM; + + /* --1: Tell the modem to initialize (we think) From sniffs this is + * always the first thing that gets sent to the modem during + * opening of the device */ + dev_dbg(dev, "%s: Sending SIO_INIT (we guess)\n", __func__); + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + IPW_SIO_INIT, + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + 0, + 0, /* index */ + NULL, + 0, + 100000); + if (result < 0) + dev_err(dev, "Init of modem failed (error = %d)\n", result); + + /* reset the bulk pipes */ + usb_clear_halt(udev, usb_rcvbulkpipe(udev, port->bulk_in_endpointAddress)); + usb_clear_halt(udev, usb_sndbulkpipe(udev, port->bulk_out_endpointAddress)); + + /*--2: Start reading from the device */ + dev_dbg(dev, "%s: setting up bulk read callback\n", __func__); + usb_wwan_open(tty, port); + + /*--3: Tell the modem to open the floodgates on the rx bulk channel */ + dev_dbg(dev, "%s:asking modem for RxRead (RXBULK_ON)\n", __func__); + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + IPW_SIO_RXCTL, + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + IPW_RXBULK_ON, + 0, /* index */ + NULL, + 0, + 100000); + if (result < 0) + dev_err(dev, "Enabling bulk RxRead failed (error = %d)\n", result); + + /*--4: setup the initial flowcontrol */ + dev_dbg(dev, "%s:setting init flowcontrol (%s)\n", __func__, buf_flow_init); + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + IPW_SIO_HANDFLOW, + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + 0, + 0, + buf_flow_init, + 0x10, + 200000); + if (result < 0) + dev_err(dev, "initial flowcontrol failed (error = %d)\n", result); + + kfree(buf_flow_init); + return 0; +} + +static int ipw_attach(struct usb_serial *serial) +{ + struct usb_wwan_intf_private *data; + + data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL); + if (!data) + return -ENOMEM; + + spin_lock_init(&data->susp_lock); + usb_set_serial_data(serial, data); + return 0; +} + +static void ipw_release(struct usb_serial *serial) +{ + struct usb_wwan_intf_private *data = usb_get_serial_data(serial); + + usb_set_serial_data(serial, NULL); + kfree(data); +} + +static void ipw_dtr_rts(struct usb_serial_port *port, int on) +{ + struct usb_device *udev = port->serial->dev; + struct device *dev = &port->dev; + int result; + + dev_dbg(dev, "%s: on = %d\n", __func__, on); + + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + IPW_SIO_SET_PIN, + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + on ? IPW_PIN_SETDTR : IPW_PIN_CLRDTR, + 0, + NULL, + 0, + 200000); + if (result < 0) + dev_err(dev, "setting dtr failed (error = %d)\n", result); + + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + IPW_SIO_SET_PIN, USB_TYPE_VENDOR | + USB_RECIP_INTERFACE | USB_DIR_OUT, + on ? IPW_PIN_SETRTS : IPW_PIN_CLRRTS, + 0, + NULL, + 0, + 200000); + if (result < 0) + dev_err(dev, "setting rts failed (error = %d)\n", result); +} + +static void ipw_close(struct usb_serial_port *port) +{ + struct usb_device *udev = port->serial->dev; + struct device *dev = &port->dev; + int result; + + /*--3: purge */ + dev_dbg(dev, "%s:sending purge\n", __func__); + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + IPW_SIO_PURGE, USB_TYPE_VENDOR | + USB_RECIP_INTERFACE | USB_DIR_OUT, + 0x03, + 0, + NULL, + 0, + 200000); + if (result < 0) + dev_err(dev, "purge failed (error = %d)\n", result); + + + /* send RXBULK_off (tell modem to stop transmitting bulk data on + rx chan) */ + result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + IPW_SIO_RXCTL, + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + IPW_RXBULK_OFF, + 0, /* index */ + NULL, + 0, + 100000); + + if (result < 0) + dev_err(dev, "Disabling bulk RxRead failed (error = %d)\n", result); + + usb_wwan_close(port); +} + +static struct usb_serial_driver ipw_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ipw", + }, + .description = "IPWireless converter", + .id_table = id_table, + .num_ports = 1, + .open = ipw_open, + .close = ipw_close, + .attach = ipw_attach, + .release = ipw_release, + .port_probe = usb_wwan_port_probe, + .port_remove = usb_wwan_port_remove, + .dtr_rts = ipw_dtr_rts, + .write = usb_wwan_write, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &ipw_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +/* Module information */ +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/ir-usb.c b/kernel/drivers/usb/serial/ir-usb.c new file mode 100644 index 000000000..73956d48a --- /dev/null +++ b/kernel/drivers/usb/serial/ir-usb.c @@ -0,0 +1,444 @@ +/* + * USB IR Dongle driver + * + * Copyright (C) 2001-2002 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2002 Gary Brubaker (xavyer@ix.netcom.com) + * Copyright (C) 2010 Johan Hovold (jhovold@gmail.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This driver allows a USB IrDA device to be used as a "dumb" serial device. + * This can be useful if you do not have access to a full IrDA stack on the + * other side of the connection. If you do have an IrDA stack on both devices, + * please use the usb-irda driver, as it contains the proper error checking and + * other goodness of a full IrDA stack. + * + * Portions of this driver were taken from drivers/net/irda/irda-usb.c, which + * was written by Roman Weissgaerber <weissg@vienna.at>, Dag Brattli + * <dag@brattli.net>, and Jean Tourrilhes <jt@hpl.hp.com> + * + * See Documentation/usb/usb-serial.txt for more information on using this + * driver + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/usb/irda.h> + +#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Johan Hovold <jhovold@gmail.com>" +#define DRIVER_DESC "USB IR Dongle driver" + +/* if overridden by the user, then use their value for the size of the read and + * write urbs */ +static int buffer_size; + +/* if overridden by the user, then use the specified number of XBOFs */ +static int xbof = -1; + +static int ir_startup (struct usb_serial *serial); +static int ir_open(struct tty_struct *tty, struct usb_serial_port *port); +static int ir_prepare_write_buffer(struct usb_serial_port *port, + void *dest, size_t size); +static void ir_process_read_urb(struct urb *urb); +static void ir_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios); + +/* Not that this lot means you can only have one per system */ +static u8 ir_baud; +static u8 ir_xbof; +static u8 ir_add_bof; + +static const struct usb_device_id ir_id_table[] = { + { USB_DEVICE(0x050f, 0x0180) }, /* KC Technology, KC-180 */ + { USB_DEVICE(0x08e9, 0x0100) }, /* XTNDAccess */ + { USB_DEVICE(0x09c4, 0x0011) }, /* ACTiSys ACT-IR2000U */ + { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, USB_SUBCLASS_IRDA, 0) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, ir_id_table); + +static struct usb_serial_driver ir_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ir-usb", + }, + .description = "IR Dongle", + .id_table = ir_id_table, + .num_ports = 1, + .set_termios = ir_set_termios, + .attach = ir_startup, + .open = ir_open, + .prepare_write_buffer = ir_prepare_write_buffer, + .process_read_urb = ir_process_read_urb, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &ir_device, NULL +}; + +static inline void irda_usb_dump_class_desc(struct usb_serial *serial, + struct usb_irda_cs_descriptor *desc) +{ + struct device *dev = &serial->dev->dev; + + dev_dbg(dev, "bLength=%x\n", desc->bLength); + dev_dbg(dev, "bDescriptorType=%x\n", desc->bDescriptorType); + dev_dbg(dev, "bcdSpecRevision=%x\n", __le16_to_cpu(desc->bcdSpecRevision)); + dev_dbg(dev, "bmDataSize=%x\n", desc->bmDataSize); + dev_dbg(dev, "bmWindowSize=%x\n", desc->bmWindowSize); + dev_dbg(dev, "bmMinTurnaroundTime=%d\n", desc->bmMinTurnaroundTime); + dev_dbg(dev, "wBaudRate=%x\n", __le16_to_cpu(desc->wBaudRate)); + dev_dbg(dev, "bmAdditionalBOFs=%x\n", desc->bmAdditionalBOFs); + dev_dbg(dev, "bIrdaRateSniff=%x\n", desc->bIrdaRateSniff); + dev_dbg(dev, "bMaxUnicastList=%x\n", desc->bMaxUnicastList); +} + +/*------------------------------------------------------------------*/ +/* + * Function irda_usb_find_class_desc(dev, ifnum) + * + * Returns instance of IrDA class descriptor, or NULL if not found + * + * The class descriptor is some extra info that IrDA USB devices will + * offer to us, describing their IrDA characteristics. We will use that in + * irda_usb_init_qos() + * + * Based on the same function in drivers/net/irda/irda-usb.c + */ +static struct usb_irda_cs_descriptor * +irda_usb_find_class_desc(struct usb_serial *serial, unsigned int ifnum) +{ + struct usb_device *dev = serial->dev; + struct usb_irda_cs_descriptor *desc; + int ret; + + desc = kzalloc(sizeof(*desc), GFP_KERNEL); + if (!desc) + return NULL; + + ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + USB_REQ_CS_IRDA_GET_CLASS_DESC, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, ifnum, desc, sizeof(*desc), 1000); + + dev_dbg(&serial->dev->dev, "%s - ret=%d\n", __func__, ret); + if (ret < sizeof(*desc)) { + dev_dbg(&serial->dev->dev, + "%s - class descriptor read %s (%d)\n", __func__, + (ret < 0) ? "failed" : "too short", ret); + goto error; + } + if (desc->bDescriptorType != USB_DT_CS_IRDA) { + dev_dbg(&serial->dev->dev, "%s - bad class descriptor type\n", + __func__); + goto error; + } + + irda_usb_dump_class_desc(serial, desc); + return desc; + +error: + kfree(desc); + return NULL; +} + +static u8 ir_xbof_change(u8 xbof) +{ + u8 result; + + /* reference irda-usb.c */ + switch (xbof) { + case 48: + result = 0x10; + break; + case 28: + case 24: + result = 0x20; + break; + default: + case 12: + result = 0x30; + break; + case 5: + case 6: + result = 0x40; + break; + case 3: + result = 0x50; + break; + case 2: + result = 0x60; + break; + case 1: + result = 0x70; + break; + case 0: + result = 0x80; + break; + } + + return(result); +} + +static int ir_startup(struct usb_serial *serial) +{ + struct usb_irda_cs_descriptor *irda_desc; + + irda_desc = irda_usb_find_class_desc(serial, 0); + if (!irda_desc) { + dev_err(&serial->dev->dev, + "IRDA class descriptor not found, device not bound\n"); + return -ENODEV; + } + + dev_dbg(&serial->dev->dev, + "%s - Baud rates supported:%s%s%s%s%s%s%s%s%s\n", + __func__, + (irda_desc->wBaudRate & USB_IRDA_BR_2400) ? " 2400" : "", + (irda_desc->wBaudRate & USB_IRDA_BR_9600) ? " 9600" : "", + (irda_desc->wBaudRate & USB_IRDA_BR_19200) ? " 19200" : "", + (irda_desc->wBaudRate & USB_IRDA_BR_38400) ? " 38400" : "", + (irda_desc->wBaudRate & USB_IRDA_BR_57600) ? " 57600" : "", + (irda_desc->wBaudRate & USB_IRDA_BR_115200) ? " 115200" : "", + (irda_desc->wBaudRate & USB_IRDA_BR_576000) ? " 576000" : "", + (irda_desc->wBaudRate & USB_IRDA_BR_1152000) ? " 1152000" : "", + (irda_desc->wBaudRate & USB_IRDA_BR_4000000) ? " 4000000" : ""); + + switch (irda_desc->bmAdditionalBOFs) { + case USB_IRDA_AB_48: + ir_add_bof = 48; + break; + case USB_IRDA_AB_24: + ir_add_bof = 24; + break; + case USB_IRDA_AB_12: + ir_add_bof = 12; + break; + case USB_IRDA_AB_6: + ir_add_bof = 6; + break; + case USB_IRDA_AB_3: + ir_add_bof = 3; + break; + case USB_IRDA_AB_2: + ir_add_bof = 2; + break; + case USB_IRDA_AB_1: + ir_add_bof = 1; + break; + case USB_IRDA_AB_0: + ir_add_bof = 0; + break; + default: + break; + } + + kfree(irda_desc); + + return 0; +} + +static int ir_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) + port->write_urbs[i]->transfer_flags = URB_ZERO_PACKET; + + /* Start reading from the device */ + return usb_serial_generic_open(tty, port); +} + +static int ir_prepare_write_buffer(struct usb_serial_port *port, + void *dest, size_t size) +{ + unsigned char *buf = dest; + int count; + + /* + * The first byte of the packet we send to the device contains an + * inbound header which indicates an additional number of BOFs and + * a baud rate change. + * + * See section 5.4.2.2 of the USB IrDA spec. + */ + *buf = ir_xbof | ir_baud; + + count = kfifo_out_locked(&port->write_fifo, buf + 1, size - 1, + &port->lock); + return count + 1; +} + +static void ir_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + + if (!urb->actual_length) + return; + /* + * The first byte of the packet we get from the device + * contains a busy indicator and baud rate change. + * See section 5.4.1.2 of the USB IrDA spec. + */ + if (*data & 0x0f) + ir_baud = *data & 0x0f; + + if (urb->actual_length == 1) + return; + + tty_insert_flip_string(&port->port, data + 1, urb->actual_length - 1); + tty_flip_buffer_push(&port->port); +} + +static void ir_set_termios_callback(struct urb *urb) +{ + kfree(urb->transfer_buffer); + + if (urb->status) + dev_dbg(&urb->dev->dev, "%s - non-zero urb status: %d\n", + __func__, urb->status); +} + +static void ir_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + struct urb *urb; + unsigned char *transfer_buffer; + int result; + speed_t baud; + int ir_baud; + + baud = tty_get_baud_rate(tty); + + /* + * FIXME, we should compare the baud request against the + * capability stated in the IR header that we got in the + * startup function. + */ + + switch (baud) { + case 2400: + ir_baud = USB_IRDA_BR_2400; + break; + case 9600: + ir_baud = USB_IRDA_BR_9600; + break; + case 19200: + ir_baud = USB_IRDA_BR_19200; + break; + case 38400: + ir_baud = USB_IRDA_BR_38400; + break; + case 57600: + ir_baud = USB_IRDA_BR_57600; + break; + case 115200: + ir_baud = USB_IRDA_BR_115200; + break; + case 576000: + ir_baud = USB_IRDA_BR_576000; + break; + case 1152000: + ir_baud = USB_IRDA_BR_1152000; + break; + case 4000000: + ir_baud = USB_IRDA_BR_4000000; + break; + default: + ir_baud = USB_IRDA_BR_9600; + baud = 9600; + } + + if (xbof == -1) + ir_xbof = ir_xbof_change(ir_add_bof); + else + ir_xbof = ir_xbof_change(xbof) ; + + /* Only speed changes are supported */ + tty_termios_copy_hw(&tty->termios, old_termios); + tty_encode_baud_rate(tty, baud, baud); + + /* + * send the baud change out on an "empty" data packet + */ + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) + return; + + transfer_buffer = kmalloc(1, GFP_KERNEL); + if (!transfer_buffer) + goto err_buf; + + *transfer_buffer = ir_xbof | ir_baud; + + usb_fill_bulk_urb( + urb, + port->serial->dev, + usb_sndbulkpipe(port->serial->dev, + port->bulk_out_endpointAddress), + transfer_buffer, + 1, + ir_set_termios_callback, + port); + + urb->transfer_flags = URB_ZERO_PACKET; + + result = usb_submit_urb(urb, GFP_KERNEL); + if (result) { + dev_err(&port->dev, "%s - failed to submit urb: %d\n", + __func__, result); + goto err_subm; + } + + usb_free_urb(urb); + + return; +err_subm: + kfree(transfer_buffer); +err_buf: + usb_free_urb(urb); +} + +static int __init ir_init(void) +{ + if (buffer_size) { + ir_device.bulk_in_size = buffer_size; + ir_device.bulk_out_size = buffer_size; + } + + return usb_serial_register_drivers(serial_drivers, KBUILD_MODNAME, ir_id_table); +} + +static void __exit ir_exit(void) +{ + usb_serial_deregister_drivers(serial_drivers); +} + + +module_init(ir_init); +module_exit(ir_exit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +module_param(xbof, int, 0); +MODULE_PARM_DESC(xbof, "Force specific number of XBOFs"); +module_param(buffer_size, int, 0); +MODULE_PARM_DESC(buffer_size, "Size of the transfer buffers"); + diff --git a/kernel/drivers/usb/serial/iuu_phoenix.c b/kernel/drivers/usb/serial/iuu_phoenix.c new file mode 100644 index 000000000..5ad4a0fb4 --- /dev/null +++ b/kernel/drivers/usb/serial/iuu_phoenix.c @@ -0,0 +1,1230 @@ +/* + * Infinity Unlimited USB Phoenix driver + * + * Copyright (C) 2010 James Courtier-Dutton (James@superbug.co.uk) + + * Copyright (C) 2007 Alain Degreffe (eczema@ecze.com) + * + * Original code taken from iuutool (Copyright (C) 2006 Juan Carlos Borrás) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * And tested with help of WB Electronics + * + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/serial.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include "iuu_phoenix.h" +#include <linux/random.h> + +#define DRIVER_DESC "Infinity USB Unlimited Phoenix driver" + +static const struct usb_device_id id_table[] = { + {USB_DEVICE(IUU_USB_VENDOR_ID, IUU_USB_PRODUCT_ID)}, + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* turbo parameter */ +static int boost = 100; +static int clockmode = 1; +static int cdmode = 1; +static int iuu_cardin; +static int iuu_cardout; +static bool xmas; +static int vcc_default = 5; + +static int iuu_create_sysfs_attrs(struct usb_serial_port *port); +static int iuu_remove_sysfs_attrs(struct usb_serial_port *port); +static void read_rxcmd_callback(struct urb *urb); + +struct iuu_private { + spinlock_t lock; /* store irq state */ + u8 line_status; + int tiostatus; /* store IUART SIGNAL for tiocmget call */ + u8 reset; /* if 1 reset is needed */ + int poll; /* number of poll */ + u8 *writebuf; /* buffer for writing to device */ + int writelen; /* num of byte to write to device */ + u8 *buf; /* used for initialize speed */ + u8 len; + int vcc; /* vcc (either 3 or 5 V) */ + u32 baud; + u32 boost; + u32 clk; +}; + +static int iuu_port_probe(struct usb_serial_port *port) +{ + struct iuu_private *priv; + int ret; + + priv = kzalloc(sizeof(struct iuu_private), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->buf = kzalloc(256, GFP_KERNEL); + if (!priv->buf) { + kfree(priv); + return -ENOMEM; + } + + priv->writebuf = kzalloc(256, GFP_KERNEL); + if (!priv->writebuf) { + kfree(priv->buf); + kfree(priv); + return -ENOMEM; + } + + priv->vcc = vcc_default; + spin_lock_init(&priv->lock); + + usb_set_serial_port_data(port, priv); + + ret = iuu_create_sysfs_attrs(port); + if (ret) { + kfree(priv->writebuf); + kfree(priv->buf); + kfree(priv); + return ret; + } + + return 0; +} + +static int iuu_port_remove(struct usb_serial_port *port) +{ + struct iuu_private *priv = usb_get_serial_port_data(port); + + iuu_remove_sysfs_attrs(port); + kfree(priv->writebuf); + kfree(priv->buf); + kfree(priv); + + return 0; +} + +static int iuu_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct iuu_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + /* FIXME: locking on tiomstatus */ + dev_dbg(&port->dev, "%s msg : SET = 0x%04x, CLEAR = 0x%04x\n", + __func__, set, clear); + + spin_lock_irqsave(&priv->lock, flags); + + if ((set & TIOCM_RTS) && !(priv->tiostatus == TIOCM_RTS)) { + dev_dbg(&port->dev, "%s TIOCMSET RESET called !!!\n", __func__); + priv->reset = 1; + } + if (set & TIOCM_RTS) + priv->tiostatus = TIOCM_RTS; + + spin_unlock_irqrestore(&priv->lock, flags); + return 0; +} + +/* This is used to provide a carrier detect mechanism + * When a card is present, the response is 0x00 + * When no card , the reader respond with TIOCM_CD + * This is known as CD autodetect mechanism + */ +static int iuu_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct iuu_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + int rc; + + spin_lock_irqsave(&priv->lock, flags); + rc = priv->tiostatus; + spin_unlock_irqrestore(&priv->lock, flags); + + return rc; +} + +static void iuu_rxcmd(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + int result; + int status = urb->status; + + if (status) { + dev_dbg(&port->dev, "%s - status = %d\n", __func__, status); + /* error stop all */ + return; + } + + + memset(port->write_urb->transfer_buffer, IUU_UART_RX, 1); + usb_fill_bulk_urb(port->write_urb, port->serial->dev, + usb_sndbulkpipe(port->serial->dev, + port->bulk_out_endpointAddress), + port->write_urb->transfer_buffer, 1, + read_rxcmd_callback, port); + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); +} + +static int iuu_reset(struct usb_serial_port *port, u8 wt) +{ + struct iuu_private *priv = usb_get_serial_port_data(port); + int result; + char *buf_ptr = port->write_urb->transfer_buffer; + + /* Prepare the reset sequence */ + + *buf_ptr++ = IUU_RST_SET; + *buf_ptr++ = IUU_DELAY_MS; + *buf_ptr++ = wt; + *buf_ptr = IUU_RST_CLEAR; + + /* send the sequence */ + + usb_fill_bulk_urb(port->write_urb, + port->serial->dev, + usb_sndbulkpipe(port->serial->dev, + port->bulk_out_endpointAddress), + port->write_urb->transfer_buffer, 4, iuu_rxcmd, port); + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); + priv->reset = 0; + return result; +} + +/* Status Function + * Return value is + * 0x00 = no card + * 0x01 = smartcard + * 0x02 = sim card + */ +static void iuu_update_status_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct iuu_private *priv = usb_get_serial_port_data(port); + u8 *st; + int status = urb->status; + + if (status) { + dev_dbg(&port->dev, "%s - status = %d\n", __func__, status); + /* error stop all */ + return; + } + + st = urb->transfer_buffer; + dev_dbg(&port->dev, "%s - enter\n", __func__); + if (urb->actual_length == 1) { + switch (st[0]) { + case 0x1: + priv->tiostatus = iuu_cardout; + break; + case 0x0: + priv->tiostatus = iuu_cardin; + break; + default: + priv->tiostatus = iuu_cardin; + } + } + iuu_rxcmd(urb); +} + +static void iuu_status_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + int result; + int status = urb->status; + + dev_dbg(&port->dev, "%s - status = %d\n", __func__, status); + usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_rcvbulkpipe(port->serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, 256, + iuu_update_status_callback, port); + result = usb_submit_urb(port->read_urb, GFP_ATOMIC); +} + +static int iuu_status(struct usb_serial_port *port) +{ + int result; + + memset(port->write_urb->transfer_buffer, IUU_GET_STATE_REGISTER, 1); + usb_fill_bulk_urb(port->write_urb, port->serial->dev, + usb_sndbulkpipe(port->serial->dev, + port->bulk_out_endpointAddress), + port->write_urb->transfer_buffer, 1, + iuu_status_callback, port); + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); + return result; + +} + +static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count) +{ + int status; + struct usb_serial *serial = port->serial; + int actual = 0; + + /* send the data out the bulk port */ + + status = + usb_bulk_msg(serial->dev, + usb_sndbulkpipe(serial->dev, + port->bulk_out_endpointAddress), buf, + count, &actual, 1000); + + if (status != IUU_OPERATION_OK) + dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status); + else + dev_dbg(&port->dev, "%s - write OK !\n", __func__); + return status; +} + +static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count) +{ + int status; + struct usb_serial *serial = port->serial; + int actual = 0; + + /* send the data out the bulk port */ + status = + usb_bulk_msg(serial->dev, + usb_rcvbulkpipe(serial->dev, + port->bulk_in_endpointAddress), buf, + count, &actual, 1000); + + if (status != IUU_OPERATION_OK) + dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status); + else + dev_dbg(&port->dev, "%s - read OK !\n", __func__); + return status; +} + +static int iuu_led(struct usb_serial_port *port, unsigned int R, + unsigned int G, unsigned int B, u8 f) +{ + int status; + u8 *buf; + buf = kmalloc(8, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + buf[0] = IUU_SET_LED; + buf[1] = R & 0xFF; + buf[2] = (R >> 8) & 0xFF; + buf[3] = G & 0xFF; + buf[4] = (G >> 8) & 0xFF; + buf[5] = B & 0xFF; + buf[6] = (B >> 8) & 0xFF; + buf[7] = f; + status = bulk_immediate(port, buf, 8); + kfree(buf); + if (status != IUU_OPERATION_OK) + dev_dbg(&port->dev, "%s - led error status = %2x\n", __func__, status); + else + dev_dbg(&port->dev, "%s - led OK !\n", __func__); + return IUU_OPERATION_OK; +} + +static void iuu_rgbf_fill_buffer(u8 *buf, u8 r1, u8 r2, u8 g1, u8 g2, u8 b1, + u8 b2, u8 freq) +{ + *buf++ = IUU_SET_LED; + *buf++ = r1; + *buf++ = r2; + *buf++ = g1; + *buf++ = g2; + *buf++ = b1; + *buf++ = b2; + *buf = freq; +} + +static void iuu_led_activity_on(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + int result; + char *buf_ptr = port->write_urb->transfer_buffer; + *buf_ptr++ = IUU_SET_LED; + if (xmas == 1) { + get_random_bytes(buf_ptr, 6); + *(buf_ptr+7) = 1; + } else { + iuu_rgbf_fill_buffer(buf_ptr, 255, 255, 0, 0, 0, 0, 255); + } + + usb_fill_bulk_urb(port->write_urb, port->serial->dev, + usb_sndbulkpipe(port->serial->dev, + port->bulk_out_endpointAddress), + port->write_urb->transfer_buffer, 8 , + iuu_rxcmd, port); + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); +} + +static void iuu_led_activity_off(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + int result; + char *buf_ptr = port->write_urb->transfer_buffer; + if (xmas == 1) { + iuu_rxcmd(urb); + return; + } else { + *buf_ptr++ = IUU_SET_LED; + iuu_rgbf_fill_buffer(buf_ptr, 0, 0, 255, 255, 0, 0, 255); + } + usb_fill_bulk_urb(port->write_urb, port->serial->dev, + usb_sndbulkpipe(port->serial->dev, + port->bulk_out_endpointAddress), + port->write_urb->transfer_buffer, 8 , + iuu_rxcmd, port); + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); +} + + + +static int iuu_clk(struct usb_serial_port *port, int dwFrq) +{ + int status; + struct iuu_private *priv = usb_get_serial_port_data(port); + int Count = 0; + u8 FrqGenAdr = 0x69; + u8 DIV = 0; /* 8bit */ + u8 XDRV = 0; /* 8bit */ + u8 PUMP = 0; /* 3bit */ + u8 PBmsb = 0; /* 2bit */ + u8 PBlsb = 0; /* 8bit */ + u8 PO = 0; /* 1bit */ + u8 Q = 0; /* 7bit */ + /* 24bit = 3bytes */ + unsigned int P = 0; + unsigned int P2 = 0; + int frq = (int)dwFrq; + + if (frq == 0) { + priv->buf[Count++] = IUU_UART_WRITE_I2C; + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x09; + priv->buf[Count++] = 0x00; + + status = bulk_immediate(port, (u8 *) priv->buf, Count); + if (status != 0) { + dev_dbg(&port->dev, "%s - write error\n", __func__); + return status; + } + } else if (frq == 3579000) { + DIV = 100; + P = 1193; + Q = 40; + XDRV = 0; + } else if (frq == 3680000) { + DIV = 105; + P = 161; + Q = 5; + XDRV = 0; + } else if (frq == 6000000) { + DIV = 66; + P = 66; + Q = 2; + XDRV = 0x28; + } else { + unsigned int result = 0; + unsigned int tmp = 0; + unsigned int check; + unsigned int check2; + char found = 0x00; + unsigned int lQ = 2; + unsigned int lP = 2055; + unsigned int lDiv = 4; + + for (lQ = 2; lQ <= 47 && !found; lQ++) + for (lP = 2055; lP >= 8 && !found; lP--) + for (lDiv = 4; lDiv <= 127 && !found; lDiv++) { + tmp = (12000000 / lDiv) * (lP / lQ); + if (abs((int)(tmp - frq)) < + abs((int)(frq - result))) { + check2 = (12000000 / lQ); + if (check2 < 250000) + continue; + check = (12000000 / lQ) * lP; + if (check > 400000000) + continue; + if (check < 100000000) + continue; + if (lDiv < 4 || lDiv > 127) + continue; + result = tmp; + P = lP; + DIV = lDiv; + Q = lQ; + if (result == frq) + found = 0x01; + } + } + } + P2 = ((P - PO) / 2) - 4; + DIV = DIV; + PUMP = 0x04; + PBmsb = (P2 >> 8 & 0x03); + PBlsb = P2 & 0xFF; + PO = (P >> 10) & 0x01; + Q = Q - 2; + + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x09; + priv->buf[Count++] = 0x20; /* Adr = 0x09 */ + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x0C; + priv->buf[Count++] = DIV; /* Adr = 0x0C */ + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x12; + priv->buf[Count++] = XDRV; /* Adr = 0x12 */ + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x13; + priv->buf[Count++] = 0x6B; /* Adr = 0x13 */ + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x40; + priv->buf[Count++] = (0xC0 | ((PUMP & 0x07) << 2)) | + (PBmsb & 0x03); /* Adr = 0x40 */ + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x41; + priv->buf[Count++] = PBlsb; /* Adr = 0x41 */ + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x42; + priv->buf[Count++] = Q | (((PO & 0x01) << 7)); /* Adr = 0x42 */ + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x44; + priv->buf[Count++] = (char)0xFF; /* Adr = 0x44 */ + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x45; + priv->buf[Count++] = (char)0xFE; /* Adr = 0x45 */ + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x46; + priv->buf[Count++] = 0x7F; /* Adr = 0x46 */ + priv->buf[Count++] = IUU_UART_WRITE_I2C; /* 0x4C */ + priv->buf[Count++] = FrqGenAdr << 1; + priv->buf[Count++] = 0x47; + priv->buf[Count++] = (char)0x84; /* Adr = 0x47 */ + + status = bulk_immediate(port, (u8 *) priv->buf, Count); + if (status != IUU_OPERATION_OK) + dev_dbg(&port->dev, "%s - write error\n", __func__); + return status; +} + +static int iuu_uart_flush(struct usb_serial_port *port) +{ + struct device *dev = &port->dev; + int i; + int status; + u8 rxcmd = IUU_UART_RX; + struct iuu_private *priv = usb_get_serial_port_data(port); + + if (iuu_led(port, 0xF000, 0, 0, 0xFF) < 0) + return -EIO; + + for (i = 0; i < 2; i++) { + status = bulk_immediate(port, &rxcmd, 1); + if (status != IUU_OPERATION_OK) { + dev_dbg(dev, "%s - uart_flush_write error\n", __func__); + return status; + } + + status = read_immediate(port, &priv->len, 1); + if (status != IUU_OPERATION_OK) { + dev_dbg(dev, "%s - uart_flush_read error\n", __func__); + return status; + } + + if (priv->len > 0) { + dev_dbg(dev, "%s - uart_flush datalen is : %i\n", __func__, priv->len); + status = read_immediate(port, priv->buf, priv->len); + if (status != IUU_OPERATION_OK) { + dev_dbg(dev, "%s - uart_flush_read error\n", __func__); + return status; + } + } + } + dev_dbg(dev, "%s - uart_flush_read OK!\n", __func__); + iuu_led(port, 0, 0xF000, 0, 0xFF); + return status; +} + +static void read_buf_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + + if (status) { + if (status == -EPROTO) { + /* reschedule needed */ + } + return; + } + + dev_dbg(&port->dev, "%s - %i chars to write\n", __func__, urb->actual_length); + if (data == NULL) + dev_dbg(&port->dev, "%s - data is NULL !!!\n", __func__); + if (urb->actual_length && data) { + tty_insert_flip_string(&port->port, data, urb->actual_length); + tty_flip_buffer_push(&port->port); + } + iuu_led_activity_on(urb); +} + +static int iuu_bulk_write(struct usb_serial_port *port) +{ + struct iuu_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + int result; + int buf_len; + char *buf_ptr = port->write_urb->transfer_buffer; + + spin_lock_irqsave(&priv->lock, flags); + *buf_ptr++ = IUU_UART_ESC; + *buf_ptr++ = IUU_UART_TX; + *buf_ptr++ = priv->writelen; + + memcpy(buf_ptr, priv->writebuf, priv->writelen); + buf_len = priv->writelen; + priv->writelen = 0; + spin_unlock_irqrestore(&priv->lock, flags); + dev_dbg(&port->dev, "%s - writing %i chars : %*ph\n", __func__, + buf_len, buf_len, buf_ptr); + usb_fill_bulk_urb(port->write_urb, port->serial->dev, + usb_sndbulkpipe(port->serial->dev, + port->bulk_out_endpointAddress), + port->write_urb->transfer_buffer, buf_len + 3, + iuu_rxcmd, port); + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); + usb_serial_port_softint(port); + return result; +} + +static int iuu_read_buf(struct usb_serial_port *port, int len) +{ + int result; + + usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_rcvbulkpipe(port->serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, len, + read_buf_callback, port); + result = usb_submit_urb(port->read_urb, GFP_ATOMIC); + return result; +} + +static void iuu_uart_read_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct iuu_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + int status = urb->status; + int error = 0; + int len = 0; + unsigned char *data = urb->transfer_buffer; + priv->poll++; + + if (status) { + dev_dbg(&port->dev, "%s - status = %d\n", __func__, status); + /* error stop all */ + return; + } + if (data == NULL) + dev_dbg(&port->dev, "%s - data is NULL !!!\n", __func__); + + if (urb->actual_length == 1 && data != NULL) + len = (int) data[0]; + + if (urb->actual_length > 1) { + dev_dbg(&port->dev, "%s - urb->actual_length = %i\n", __func__, + urb->actual_length); + error = 1; + return; + } + /* if len > 0 call readbuf */ + + if (len > 0 && error == 0) { + dev_dbg(&port->dev, "%s - call read buf - len to read is %i\n", + __func__, len); + status = iuu_read_buf(port, len); + return; + } + /* need to update status ? */ + if (priv->poll > 99) { + status = iuu_status(port); + priv->poll = 0; + return; + } + + /* reset waiting ? */ + + if (priv->reset == 1) { + status = iuu_reset(port, 0xC); + return; + } + /* Writebuf is waiting */ + spin_lock_irqsave(&priv->lock, flags); + if (priv->writelen > 0) { + spin_unlock_irqrestore(&priv->lock, flags); + status = iuu_bulk_write(port); + return; + } + spin_unlock_irqrestore(&priv->lock, flags); + /* if nothing to write call again rxcmd */ + dev_dbg(&port->dev, "%s - rxcmd recall\n", __func__); + iuu_led_activity_off(urb); +} + +static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port, + const u8 *buf, int count) +{ + struct iuu_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + if (count > 256) + return -ENOMEM; + + spin_lock_irqsave(&priv->lock, flags); + + /* fill the buffer */ + memcpy(priv->writebuf + priv->writelen, buf, count); + priv->writelen += count; + spin_unlock_irqrestore(&priv->lock, flags); + + return count; +} + +static void read_rxcmd_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + int result; + int status = urb->status; + + if (status) { + /* error stop all */ + return; + } + + usb_fill_bulk_urb(port->read_urb, port->serial->dev, + usb_rcvbulkpipe(port->serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, 256, + iuu_uart_read_callback, port); + result = usb_submit_urb(port->read_urb, GFP_ATOMIC); + dev_dbg(&port->dev, "%s - submit result = %d\n", __func__, result); +} + +static int iuu_uart_on(struct usb_serial_port *port) +{ + int status; + u8 *buf; + + buf = kmalloc(sizeof(u8) * 4, GFP_KERNEL); + + if (!buf) + return -ENOMEM; + + buf[0] = IUU_UART_ENABLE; + buf[1] = (u8) ((IUU_BAUD_9600 >> 8) & 0x00FF); + buf[2] = (u8) (0x00FF & IUU_BAUD_9600); + buf[3] = (u8) (0x0F0 & IUU_ONE_STOP_BIT) | (0x07 & IUU_PARITY_EVEN); + + status = bulk_immediate(port, buf, 4); + if (status != IUU_OPERATION_OK) { + dev_dbg(&port->dev, "%s - uart_on error\n", __func__); + goto uart_enable_failed; + } + /* iuu_reset() the card after iuu_uart_on() */ + status = iuu_uart_flush(port); + if (status != IUU_OPERATION_OK) + dev_dbg(&port->dev, "%s - uart_flush error\n", __func__); +uart_enable_failed: + kfree(buf); + return status; +} + +/* Disables the IUU UART (a.k.a. the Phoenix voiderface) */ +static int iuu_uart_off(struct usb_serial_port *port) +{ + int status; + u8 *buf; + buf = kmalloc(1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + buf[0] = IUU_UART_DISABLE; + + status = bulk_immediate(port, buf, 1); + if (status != IUU_OPERATION_OK) + dev_dbg(&port->dev, "%s - uart_off error\n", __func__); + + kfree(buf); + return status; +} + +static int iuu_uart_baud(struct usb_serial_port *port, u32 baud_base, + u32 *actual, u8 parity) +{ + int status; + u32 baud; + u8 *dataout; + u8 DataCount = 0; + u8 T1Frekvens = 0; + u8 T1reload = 0; + unsigned int T1FrekvensHZ = 0; + + dev_dbg(&port->dev, "%s - enter baud_base=%d\n", __func__, baud_base); + dataout = kmalloc(sizeof(u8) * 5, GFP_KERNEL); + + if (!dataout) + return -ENOMEM; + /*baud = (((priv->clk / 35) * baud_base) / 100000); */ + baud = baud_base; + + if (baud < 1200 || baud > 230400) { + kfree(dataout); + return IUU_INVALID_PARAMETER; + } + if (baud > 977) { + T1Frekvens = 3; + T1FrekvensHZ = 500000; + } + + if (baud > 3906) { + T1Frekvens = 2; + T1FrekvensHZ = 2000000; + } + + if (baud > 11718) { + T1Frekvens = 1; + T1FrekvensHZ = 6000000; + } + + if (baud > 46875) { + T1Frekvens = 0; + T1FrekvensHZ = 24000000; + } + + T1reload = 256 - (u8) (T1FrekvensHZ / (baud * 2)); + + /* magic number here: ENTER_FIRMWARE_UPDATE; */ + dataout[DataCount++] = IUU_UART_ESC; + /* magic number here: CHANGE_BAUD; */ + dataout[DataCount++] = IUU_UART_CHANGE; + dataout[DataCount++] = T1Frekvens; + dataout[DataCount++] = T1reload; + + *actual = (T1FrekvensHZ / (256 - T1reload)) / 2; + + switch (parity & 0x0F) { + case IUU_PARITY_NONE: + dataout[DataCount++] = 0x00; + break; + case IUU_PARITY_EVEN: + dataout[DataCount++] = 0x01; + break; + case IUU_PARITY_ODD: + dataout[DataCount++] = 0x02; + break; + case IUU_PARITY_MARK: + dataout[DataCount++] = 0x03; + break; + case IUU_PARITY_SPACE: + dataout[DataCount++] = 0x04; + break; + default: + kfree(dataout); + return IUU_INVALID_PARAMETER; + break; + } + + switch (parity & 0xF0) { + case IUU_ONE_STOP_BIT: + dataout[DataCount - 1] |= IUU_ONE_STOP_BIT; + break; + + case IUU_TWO_STOP_BITS: + dataout[DataCount - 1] |= IUU_TWO_STOP_BITS; + break; + default: + kfree(dataout); + return IUU_INVALID_PARAMETER; + break; + } + + status = bulk_immediate(port, dataout, DataCount); + if (status != IUU_OPERATION_OK) + dev_dbg(&port->dev, "%s - uart_off error\n", __func__); + kfree(dataout); + return status; +} + +static void iuu_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + const u32 supported_mask = CMSPAR|PARENB|PARODD; + struct iuu_private *priv = usb_get_serial_port_data(port); + unsigned int cflag = tty->termios.c_cflag; + int status; + u32 actual; + u32 parity; + int csize = CS7; + int baud; + u32 newval = cflag & supported_mask; + + /* Just use the ospeed. ispeed should be the same. */ + baud = tty->termios.c_ospeed; + + dev_dbg(&port->dev, "%s - enter c_ospeed or baud=%d\n", __func__, baud); + + /* compute the parity parameter */ + parity = 0; + if (cflag & CMSPAR) { /* Using mark space */ + if (cflag & PARODD) + parity |= IUU_PARITY_SPACE; + else + parity |= IUU_PARITY_MARK; + } else if (!(cflag & PARENB)) { + parity |= IUU_PARITY_NONE; + csize = CS8; + } else if (cflag & PARODD) + parity |= IUU_PARITY_ODD; + else + parity |= IUU_PARITY_EVEN; + + parity |= (cflag & CSTOPB ? IUU_TWO_STOP_BITS : IUU_ONE_STOP_BIT); + + /* set it */ + status = iuu_uart_baud(port, + baud * priv->boost / 100, + &actual, parity); + + /* set the termios value to the real one, so the user now what has + * changed. We support few fields so its easies to copy the old hw + * settings back over and then adjust them + */ + if (old_termios) + tty_termios_copy_hw(&tty->termios, old_termios); + if (status != 0) /* Set failed - return old bits */ + return; + /* Re-encode speed, parity and csize */ + tty_encode_baud_rate(tty, baud, baud); + tty->termios.c_cflag &= ~(supported_mask|CSIZE); + tty->termios.c_cflag |= newval | csize; +} + +static void iuu_close(struct usb_serial_port *port) +{ + /* iuu_led (port,255,0,0,0); */ + + iuu_uart_off(port); + + usb_kill_urb(port->write_urb); + usb_kill_urb(port->read_urb); + + iuu_led(port, 0, 0, 0xF000, 0xFF); +} + +static void iuu_init_termios(struct tty_struct *tty) +{ + tty->termios = tty_std_termios; + tty->termios.c_cflag = CLOCAL | CREAD | CS8 | B9600 + | TIOCM_CTS | CSTOPB | PARENB; + tty->termios.c_ispeed = 9600; + tty->termios.c_ospeed = 9600; + tty->termios.c_lflag = 0; + tty->termios.c_oflag = 0; + tty->termios.c_iflag = 0; +} + +static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct device *dev = &port->dev; + u8 *buf; + int result; + int baud; + u32 actual; + struct iuu_private *priv = usb_get_serial_port_data(port); + + baud = tty->termios.c_ospeed; + tty->termios.c_ispeed = baud; + /* Re-encode speed */ + tty_encode_baud_rate(tty, baud, baud); + + dev_dbg(dev, "%s - baud %d\n", __func__, baud); + usb_clear_halt(serial->dev, port->write_urb->pipe); + usb_clear_halt(serial->dev, port->read_urb->pipe); + + buf = kmalloc(10, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + priv->poll = 0; + + /* initialize writebuf */ +#define FISH(a, b, c, d) do { \ + result = usb_control_msg(port->serial->dev, \ + usb_rcvctrlpipe(port->serial->dev, 0), \ + b, a, c, d, buf, 1, 1000); \ + dev_dbg(dev, "0x%x:0x%x:0x%x:0x%x %d - %x\n", a, b, c, d, result, \ + buf[0]); } while (0); + +#define SOUP(a, b, c, d) do { \ + result = usb_control_msg(port->serial->dev, \ + usb_sndctrlpipe(port->serial->dev, 0), \ + b, a, c, d, NULL, 0, 1000); \ + dev_dbg(dev, "0x%x:0x%x:0x%x:0x%x %d\n", a, b, c, d, result); } while (0) + + /* This is not UART related but IUU USB driver related or something */ + /* like that. Basically no IUU will accept any commands from the USB */ + /* host unless it has received the following message */ + /* sprintf(buf ,"%c%c%c%c",0x03,0x02,0x02,0x0); */ + + SOUP(0x03, 0x02, 0x02, 0x0); + kfree(buf); + iuu_led(port, 0xF000, 0xF000, 0, 0xFF); + iuu_uart_on(port); + if (boost < 100) + boost = 100; + priv->boost = boost; + priv->baud = baud; + switch (clockmode) { + case 2: /* 3.680 Mhz */ + priv->clk = IUU_CLK_3680000; + iuu_clk(port, IUU_CLK_3680000 * boost / 100); + result = + iuu_uart_baud(port, baud * boost / 100, &actual, + IUU_PARITY_EVEN); + break; + case 3: /* 6.00 Mhz */ + iuu_clk(port, IUU_CLK_6000000 * boost / 100); + priv->clk = IUU_CLK_6000000; + /* Ratio of 6000000 to 3500000 for baud 9600 */ + result = + iuu_uart_baud(port, 16457 * boost / 100, &actual, + IUU_PARITY_EVEN); + break; + default: /* 3.579 Mhz */ + iuu_clk(port, IUU_CLK_3579000 * boost / 100); + priv->clk = IUU_CLK_3579000; + result = + iuu_uart_baud(port, baud * boost / 100, &actual, + IUU_PARITY_EVEN); + } + + /* set the cardin cardout signals */ + switch (cdmode) { + case 0: + iuu_cardin = 0; + iuu_cardout = 0; + break; + case 1: + iuu_cardin = TIOCM_CD; + iuu_cardout = 0; + break; + case 2: + iuu_cardin = 0; + iuu_cardout = TIOCM_CD; + break; + case 3: + iuu_cardin = TIOCM_DSR; + iuu_cardout = 0; + break; + case 4: + iuu_cardin = 0; + iuu_cardout = TIOCM_DSR; + break; + case 5: + iuu_cardin = TIOCM_CTS; + iuu_cardout = 0; + break; + case 6: + iuu_cardin = 0; + iuu_cardout = TIOCM_CTS; + break; + case 7: + iuu_cardin = TIOCM_RNG; + iuu_cardout = 0; + break; + case 8: + iuu_cardin = 0; + iuu_cardout = TIOCM_RNG; + } + + iuu_uart_flush(port); + + dev_dbg(dev, "%s - initialization done\n", __func__); + + memset(port->write_urb->transfer_buffer, IUU_UART_RX, 1); + usb_fill_bulk_urb(port->write_urb, port->serial->dev, + usb_sndbulkpipe(port->serial->dev, + port->bulk_out_endpointAddress), + port->write_urb->transfer_buffer, 1, + read_rxcmd_callback, port); + result = usb_submit_urb(port->write_urb, GFP_KERNEL); + if (result) { + dev_err(dev, "%s - failed submitting read urb, error %d\n", __func__, result); + iuu_close(port); + } else { + dev_dbg(dev, "%s - rxcmd OK\n", __func__); + } + + return result; +} + +/* how to change VCC */ +static int iuu_vcc_set(struct usb_serial_port *port, unsigned int vcc) +{ + int status; + u8 *buf; + + buf = kmalloc(5, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + buf[0] = IUU_SET_VCC; + buf[1] = vcc & 0xFF; + buf[2] = (vcc >> 8) & 0xFF; + buf[3] = (vcc >> 16) & 0xFF; + buf[4] = (vcc >> 24) & 0xFF; + + status = bulk_immediate(port, buf, 5); + kfree(buf); + + if (status != IUU_OPERATION_OK) + dev_dbg(&port->dev, "%s - vcc error status = %2x\n", __func__, status); + else + dev_dbg(&port->dev, "%s - vcc OK !\n", __func__); + + return status; +} + +/* + * Sysfs Attributes + */ + +static ssize_t vcc_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_serial_port *port = to_usb_serial_port(dev); + struct iuu_private *priv = usb_get_serial_port_data(port); + + return sprintf(buf, "%d\n", priv->vcc); +} + +static ssize_t vcc_mode_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct usb_serial_port *port = to_usb_serial_port(dev); + struct iuu_private *priv = usb_get_serial_port_data(port); + unsigned long v; + + if (kstrtoul(buf, 10, &v)) { + dev_err(dev, "%s - vcc_mode: %s is not a unsigned long\n", + __func__, buf); + goto fail_store_vcc_mode; + } + + dev_dbg(dev, "%s: setting vcc_mode = %ld\n", __func__, v); + + if ((v != 3) && (v != 5)) { + dev_err(dev, "%s - vcc_mode %ld is invalid\n", __func__, v); + } else { + iuu_vcc_set(port, v); + priv->vcc = v; + } +fail_store_vcc_mode: + return count; +} +static DEVICE_ATTR_RW(vcc_mode); + +static int iuu_create_sysfs_attrs(struct usb_serial_port *port) +{ + return device_create_file(&port->dev, &dev_attr_vcc_mode); +} + +static int iuu_remove_sysfs_attrs(struct usb_serial_port *port) +{ + device_remove_file(&port->dev, &dev_attr_vcc_mode); + return 0; +} + +/* + * End Sysfs Attributes + */ + +static struct usb_serial_driver iuu_device = { + .driver = { + .owner = THIS_MODULE, + .name = "iuu_phoenix", + }, + .id_table = id_table, + .num_ports = 1, + .bulk_in_size = 512, + .bulk_out_size = 512, + .open = iuu_open, + .close = iuu_close, + .write = iuu_uart_write, + .read_bulk_callback = iuu_uart_read_callback, + .tiocmget = iuu_tiocmget, + .tiocmset = iuu_tiocmset, + .set_termios = iuu_set_termios, + .init_termios = iuu_init_termios, + .port_probe = iuu_port_probe, + .port_remove = iuu_port_remove, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &iuu_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_AUTHOR("Alain Degreffe eczema@ecze.com"); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +module_param(xmas, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(xmas, "Xmas colors enabled or not"); + +module_param(boost, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(boost, "Card overclock boost (in percent 100-500)"); + +module_param(clockmode, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(clockmode, "Card clock mode (1=3.579 MHz, 2=3.680 MHz, " + "3=6 Mhz)"); + +module_param(cdmode, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(cdmode, "Card detect mode (0=none, 1=CD, 2=!CD, 3=DSR, " + "4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING)"); + +module_param(vcc_default, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(vcc_default, "Set default VCC (either 3 for 3.3V or 5 " + "for 5V). Default to 5."); diff --git a/kernel/drivers/usb/serial/iuu_phoenix.h b/kernel/drivers/usb/serial/iuu_phoenix.h new file mode 100644 index 000000000..b82630a3b --- /dev/null +++ b/kernel/drivers/usb/serial/iuu_phoenix.h @@ -0,0 +1,122 @@ +/* + * Infinity Unlimited USB Phoenix driver + * + * Copyright (C) 2007 Alain Degreffe (eczema@ecze.com) + * + * + * Original code taken from iuutool ( Copyright (C) 2006 Juan Carlos Borrás ) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * And tested with help of WB Electronics + * + */ + +#define IUU_USB_VENDOR_ID 0x104f +#define IUU_USB_PRODUCT_ID 0x0004 +#define IUU_USB_OP_TIMEOUT 0x0200 + +/* Programmer commands */ + +#define IUU_NO_OPERATION 0x00 +#define IUU_GET_FIRMWARE_VERSION 0x01 +#define IUU_GET_PRODUCT_NAME 0x02 +#define IUU_GET_STATE_REGISTER 0x03 +#define IUU_SET_LED 0x04 +#define IUU_WAIT_MUS 0x05 +#define IUU_WAIT_MS 0x06 +#define IUU_GET_LOADER_VERSION 0x50 +#define IUU_RST_SET 0x52 +#define IUU_RST_CLEAR 0x53 +#define IUU_SET_VCC 0x59 +#define IUU_UART_ENABLE 0x49 +#define IUU_UART_DISABLE 0x4A +#define IUU_UART_WRITE_I2C 0x4C +#define IUU_UART_ESC 0x5E +#define IUU_UART_TRAP 0x54 +#define IUU_UART_TRAP_BREAK 0x5B +#define IUU_UART_RX 0x56 +#define IUU_AVR_ON 0x21 +#define IUU_AVR_OFF 0x22 +#define IUU_AVR_1CLK 0x23 +#define IUU_AVR_RESET 0x24 +#define IUU_AVR_RESET_PC 0x25 +#define IUU_AVR_INC_PC 0x26 +#define IUU_AVR_INCN_PC 0x27 +#define IUU_AVR_PREAD 0x29 +#define IUU_AVR_PREADN 0x2A +#define IUU_AVR_PWRITE 0x28 +#define IUU_AVR_DREAD 0x2C +#define IUU_AVR_DREADN 0x2D +#define IUU_AVR_DWRITE 0x2B +#define IUU_AVR_PWRITEN 0x2E +#define IUU_EEPROM_ON 0x37 +#define IUU_EEPROM_OFF 0x38 +#define IUU_EEPROM_WRITE 0x39 +#define IUU_EEPROM_WRITEX 0x3A +#define IUU_EEPROM_WRITE8 0x3B +#define IUU_EEPROM_WRITE16 0x3C +#define IUU_EEPROM_WRITEX32 0x3D +#define IUU_EEPROM_WRITEX64 0x3E +#define IUU_EEPROM_READ 0x3F +#define IUU_EEPROM_READX 0x40 +#define IUU_EEPROM_BREAD 0x41 +#define IUU_EEPROM_BREADX 0x42 +#define IUU_PIC_CMD 0x0A +#define IUU_PIC_CMD_LOAD 0x0B +#define IUU_PIC_CMD_READ 0x0C +#define IUU_PIC_ON 0x0D +#define IUU_PIC_OFF 0x0E +#define IUU_PIC_RESET 0x16 +#define IUU_PIC_INC_PC 0x0F +#define IUU_PIC_INCN_PC 0x10 +#define IUU_PIC_PWRITE 0x11 +#define IUU_PIC_PREAD 0x12 +#define IUU_PIC_PREADN 0x13 +#define IUU_PIC_DWRITE 0x14 +#define IUU_PIC_DREAD 0x15 +#define IUU_UART_NOP 0x00 +#define IUU_UART_CHANGE 0x02 +#define IUU_UART_TX 0x04 +#define IUU_DELAY_MS 0x06 + +#define IUU_OPERATION_OK 0x00 +#define IUU_DEVICE_NOT_FOUND 0x01 +#define IUU_INVALID_HANDLE 0x02 +#define IUU_INVALID_PARAMETER 0x03 +#define IUU_INVALID_voidERFACE 0x04 +#define IUU_INVALID_REQUEST_LENGTH 0x05 +#define IUU_UART_NOT_ENABLED 0x06 +#define IUU_WRITE_ERROR 0x07 +#define IUU_READ_ERROR 0x08 +#define IUU_TX_ERROR 0x09 +#define IUU_RX_ERROR 0x0A + +#define IUU_PARITY_NONE 0x00 +#define IUU_PARITY_EVEN 0x01 +#define IUU_PARITY_ODD 0x02 +#define IUU_PARITY_MARK 0x03 +#define IUU_PARITY_SPACE 0x04 +#define IUU_SC_INSERTED 0x01 +#define IUU_VERIFY_ERROR 0x02 +#define IUU_SIM_INSERTED 0x04 +#define IUU_TWO_STOP_BITS 0x00 +#define IUU_ONE_STOP_BIT 0x20 +#define IUU_BAUD_2400 0x0398 +#define IUU_BAUD_9600 0x0298 +#define IUU_BAUD_19200 0x0164 +#define IUU_BAUD_28800 0x0198 +#define IUU_BAUD_38400 0x01B2 +#define IUU_BAUD_57600 0x0030 +#define IUU_BAUD_115200 0x0098 +#define IUU_CLK_3579000 3579000 +#define IUU_CLK_3680000 3680000 +#define IUU_CLK_6000000 6000000 +#define IUU_FULLCARD_IN 0x01 +#define IUU_DEV_ERROR 0x02 +#define IUU_MINICARD_IN 0x04 +#define IUU_VCC_5V 0x00 +#define IUU_VCC_3V 0x01 diff --git a/kernel/drivers/usb/serial/keyspan.c b/kernel/drivers/usb/serial/keyspan.c new file mode 100644 index 000000000..e07b15ed5 --- /dev/null +++ b/kernel/drivers/usb/serial/keyspan.c @@ -0,0 +1,2535 @@ +/* + Keyspan USB to Serial Converter driver + + (C) Copyright (C) 2000-2001 Hugh Blemings <hugh@blemings.org> + (C) Copyright (C) 2002 Greg Kroah-Hartman <greg@kroah.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + See http://blemings.org/hugh/keyspan.html for more information. + + Code in this driver inspired by and in a number of places taken + from Brian Warner's original Keyspan-PDA driver. + + This driver has been put together with the support of Innosys, Inc. + and Keyspan, Inc the manufacturers of the Keyspan USB-serial products. + Thanks Guys :) + + Thanks to Paulus for miscellaneous tidy ups, some largish chunks + of much nicer and/or completely new code and (perhaps most uniquely) + having the patience to sit down and explain why and where he'd changed + stuff. + + Tip 'o the hat to IBM (and previously Linuxcare :) for supporting + staff in their work on open source projects. +*/ + + +#include <linux/kernel.h> +#include <linux/jiffies.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/usb/ezusb.h> +#include "keyspan.h" + +#define DRIVER_AUTHOR "Hugh Blemings <hugh@misc.nu" +#define DRIVER_DESC "Keyspan USB to Serial Converter Driver" + +#define INSTAT_BUFLEN 32 +#define GLOCONT_BUFLEN 64 +#define INDAT49W_BUFLEN 512 +#define IN_BUFLEN 64 +#define OUT_BUFLEN 64 +#define INACK_BUFLEN 1 +#define OUTCONT_BUFLEN 64 + + /* Per device and per port private data */ +struct keyspan_serial_private { + const struct keyspan_device_details *device_details; + + struct urb *instat_urb; + char *instat_buf; + + /* added to support 49wg, where data from all 4 ports comes in + on 1 EP and high-speed supported */ + struct urb *indat_urb; + char *indat_buf; + + /* XXX this one probably will need a lock */ + struct urb *glocont_urb; + char *glocont_buf; + char *ctrl_buf; /* for EP0 control message */ +}; + +struct keyspan_port_private { + /* Keep track of which input & output endpoints to use */ + int in_flip; + int out_flip; + + /* Keep duplicate of device details in each port + structure as well - simplifies some of the + callback functions etc. */ + const struct keyspan_device_details *device_details; + + /* Input endpoints and buffer for this port */ + struct urb *in_urbs[2]; + char *in_buffer[2]; + /* Output endpoints and buffer for this port */ + struct urb *out_urbs[2]; + char *out_buffer[2]; + + /* Input ack endpoint */ + struct urb *inack_urb; + char *inack_buffer; + + /* Output control endpoint */ + struct urb *outcont_urb; + char *outcont_buffer; + + /* Settings for the port */ + int baud; + int old_baud; + unsigned int cflag; + unsigned int old_cflag; + enum {flow_none, flow_cts, flow_xon} flow_control; + int rts_state; /* Handshaking pins (outputs) */ + int dtr_state; + int cts_state; /* Handshaking pins (inputs) */ + int dsr_state; + int dcd_state; + int ri_state; + int break_on; + + unsigned long tx_start_time[2]; + int resend_cont; /* need to resend control packet */ +}; + +/* Include Keyspan message headers. All current Keyspan Adapters + make use of one of five message formats which are referred + to as USA-26, USA-28, USA-49, USA-90, USA-67 by Keyspan and + within this driver. */ +#include "keyspan_usa26msg.h" +#include "keyspan_usa28msg.h" +#include "keyspan_usa49msg.h" +#include "keyspan_usa90msg.h" +#include "keyspan_usa67msg.h" + + +module_usb_serial_driver(serial_drivers, keyspan_ids_combined); + +static void keyspan_break_ctl(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + struct keyspan_port_private *p_priv; + + p_priv = usb_get_serial_port_data(port); + + if (break_state == -1) + p_priv->break_on = 1; + else + p_priv->break_on = 0; + + keyspan_send_setup(port, 0); +} + + +static void keyspan_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + int baud_rate, device_port; + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + unsigned int cflag; + + p_priv = usb_get_serial_port_data(port); + d_details = p_priv->device_details; + cflag = tty->termios.c_cflag; + device_port = port->port_number; + + /* Baud rate calculation takes baud rate as an integer + so other rates can be generated if desired. */ + baud_rate = tty_get_baud_rate(tty); + /* If no match or invalid, don't change */ + if (d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk, + NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { + /* FIXME - more to do here to ensure rate changes cleanly */ + /* FIXME - calculate exact rate from divisor ? */ + p_priv->baud = baud_rate; + } else + baud_rate = tty_termios_baud_rate(old_termios); + + tty_encode_baud_rate(tty, baud_rate, baud_rate); + /* set CTS/RTS handshake etc. */ + p_priv->cflag = cflag; + p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none; + + /* Mark/Space not supported */ + tty->termios.c_cflag &= ~CMSPAR; + + keyspan_send_setup(port, 0); +} + +static int keyspan_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct keyspan_port_private *p_priv = usb_get_serial_port_data(port); + unsigned int value; + + value = ((p_priv->rts_state) ? TIOCM_RTS : 0) | + ((p_priv->dtr_state) ? TIOCM_DTR : 0) | + ((p_priv->cts_state) ? TIOCM_CTS : 0) | + ((p_priv->dsr_state) ? TIOCM_DSR : 0) | + ((p_priv->dcd_state) ? TIOCM_CAR : 0) | + ((p_priv->ri_state) ? TIOCM_RNG : 0); + + return value; +} + +static int keyspan_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct keyspan_port_private *p_priv = usb_get_serial_port_data(port); + + if (set & TIOCM_RTS) + p_priv->rts_state = 1; + if (set & TIOCM_DTR) + p_priv->dtr_state = 1; + if (clear & TIOCM_RTS) + p_priv->rts_state = 0; + if (clear & TIOCM_DTR) + p_priv->dtr_state = 0; + keyspan_send_setup(port, 0); + return 0; +} + +/* Write function is similar for the four protocols used + with only a minor change for usa90 (usa19hs) required */ +static int keyspan_write(struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count) +{ + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + int flip; + int left, todo; + struct urb *this_urb; + int err, maxDataLen, dataOffset; + + p_priv = usb_get_serial_port_data(port); + d_details = p_priv->device_details; + + if (d_details->msg_format == msg_usa90) { + maxDataLen = 64; + dataOffset = 0; + } else { + maxDataLen = 63; + dataOffset = 1; + } + + dev_dbg(&port->dev, "%s - %d chars, flip=%d\n", __func__, count, + p_priv->out_flip); + + for (left = count; left > 0; left -= todo) { + todo = left; + if (todo > maxDataLen) + todo = maxDataLen; + + flip = p_priv->out_flip; + + /* Check we have a valid urb/endpoint before we use it... */ + this_urb = p_priv->out_urbs[flip]; + if (this_urb == NULL) { + /* no bulk out, so return 0 bytes written */ + dev_dbg(&port->dev, "%s - no output urb :(\n", __func__); + return count; + } + + dev_dbg(&port->dev, "%s - endpoint %d flip %d\n", + __func__, usb_pipeendpoint(this_urb->pipe), flip); + + if (this_urb->status == -EINPROGRESS) { + if (time_before(jiffies, + p_priv->tx_start_time[flip] + 10 * HZ)) + break; + usb_unlink_urb(this_urb); + break; + } + + /* First byte in buffer is "last flag" (except for usa19hx) + - unused so for now so set to zero */ + ((char *)this_urb->transfer_buffer)[0] = 0; + + memcpy(this_urb->transfer_buffer + dataOffset, buf, todo); + buf += todo; + + /* send the data out the bulk port */ + this_urb->transfer_buffer_length = todo + dataOffset; + + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed (%d)\n", err); + p_priv->tx_start_time[flip] = jiffies; + + /* Flip for next time if usa26 or usa28 interface + (not used on usa49) */ + p_priv->out_flip = (flip + 1) & d_details->outdat_endp_flip; + } + + return count - left; +} + +static void usa26_indat_callback(struct urb *urb) +{ + int i, err; + int endpoint; + struct usb_serial_port *port; + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + + endpoint = usb_pipeendpoint(urb->pipe); + + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n", + __func__, status, endpoint); + return; + } + + port = urb->context; + if (urb->actual_length) { + /* 0x80 bit is error flag */ + if ((data[0] & 0x80) == 0) { + /* no errors on individual bytes, only + possible overrun err */ + if (data[0] & RXERROR_OVERRUN) { + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } + for (i = 1; i < urb->actual_length ; ++i) + tty_insert_flip_char(&port->port, data[i], + TTY_NORMAL); + } else { + /* some bytes had errors, every byte has status */ + dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); + for (i = 0; i + 1 < urb->actual_length; i += 2) { + int stat = data[i]; + int flag = TTY_NORMAL; + + if (stat & RXERROR_OVERRUN) { + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } + /* XXX should handle break (0x10) */ + if (stat & RXERROR_PARITY) + flag = TTY_PARITY; + else if (stat & RXERROR_FRAMING) + flag = TTY_FRAME; + + tty_insert_flip_char(&port->port, data[i+1], + flag); + } + } + tty_flip_buffer_push(&port->port); + } + + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); +} + +/* Outdat handling is common for all devices */ +static void usa2x_outdat_callback(struct urb *urb) +{ + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + + port = urb->context; + p_priv = usb_get_serial_port_data(port); + dev_dbg(&port->dev, "%s - urb %d\n", __func__, urb == p_priv->out_urbs[1]); + + usb_serial_port_softint(port); +} + +static void usa26_inack_callback(struct urb *urb) +{ +} + +static void usa26_outcont_callback(struct urb *urb) +{ + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + + port = urb->context; + p_priv = usb_get_serial_port_data(port); + + if (p_priv->resend_cont) { + dev_dbg(&port->dev, "%s - sending setup\n", __func__); + keyspan_usa26_send_setup(port->serial, port, + p_priv->resend_cont - 1); + } +} + +static void usa26_instat_callback(struct urb *urb) +{ + unsigned char *data = urb->transfer_buffer; + struct keyspan_usa26_portStatusMessage *msg; + struct usb_serial *serial; + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + int old_dcd_state, err; + int status = urb->status; + + serial = urb->context; + + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); + return; + } + if (urb->actual_length != 9) { + dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length); + goto exit; + } + + msg = (struct keyspan_usa26_portStatusMessage *)data; + + /* Check port number from message and retrieve private data */ + if (msg->port >= serial->num_ports) { + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); + goto exit; + } + port = serial->port[msg->port]; + p_priv = usb_get_serial_port_data(port); + if (!p_priv) + goto resubmit; + + /* Update handshaking pin state information */ + old_dcd_state = p_priv->dcd_state; + p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0); + p_priv->dsr_state = ((msg->dsr) ? 1 : 0); + p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0); + p_priv->ri_state = ((msg->ri) ? 1 : 0); + + if (old_dcd_state != p_priv->dcd_state) + tty_port_tty_hangup(&port->port, true); +resubmit: + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); +exit: ; +} + +static void usa26_glocont_callback(struct urb *urb) +{ +} + + +static void usa28_indat_callback(struct urb *urb) +{ + int err; + struct usb_serial_port *port; + unsigned char *data; + struct keyspan_port_private *p_priv; + int status = urb->status; + + port = urb->context; + p_priv = usb_get_serial_port_data(port); + data = urb->transfer_buffer; + + if (urb != p_priv->in_urbs[p_priv->in_flip]) + return; + + do { + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n", + __func__, status, usb_pipeendpoint(urb->pipe)); + return; + } + + port = urb->context; + p_priv = usb_get_serial_port_data(port); + data = urb->transfer_buffer; + + if (urb->actual_length) { + tty_insert_flip_string(&port->port, data, + urb->actual_length); + tty_flip_buffer_push(&port->port); + } + + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", + __func__, err); + p_priv->in_flip ^= 1; + + urb = p_priv->in_urbs[p_priv->in_flip]; + } while (urb->status != -EINPROGRESS); +} + +static void usa28_inack_callback(struct urb *urb) +{ +} + +static void usa28_outcont_callback(struct urb *urb) +{ + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + + port = urb->context; + p_priv = usb_get_serial_port_data(port); + + if (p_priv->resend_cont) { + dev_dbg(&port->dev, "%s - sending setup\n", __func__); + keyspan_usa28_send_setup(port->serial, port, + p_priv->resend_cont - 1); + } +} + +static void usa28_instat_callback(struct urb *urb) +{ + int err; + unsigned char *data = urb->transfer_buffer; + struct keyspan_usa28_portStatusMessage *msg; + struct usb_serial *serial; + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + int old_dcd_state; + int status = urb->status; + + serial = urb->context; + + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); + return; + } + + if (urb->actual_length != sizeof(struct keyspan_usa28_portStatusMessage)) { + dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); + goto exit; + } + + msg = (struct keyspan_usa28_portStatusMessage *)data; + + /* Check port number from message and retrieve private data */ + if (msg->port >= serial->num_ports) { + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); + goto exit; + } + port = serial->port[msg->port]; + p_priv = usb_get_serial_port_data(port); + if (!p_priv) + goto resubmit; + + /* Update handshaking pin state information */ + old_dcd_state = p_priv->dcd_state; + p_priv->cts_state = ((msg->cts) ? 1 : 0); + p_priv->dsr_state = ((msg->dsr) ? 1 : 0); + p_priv->dcd_state = ((msg->dcd) ? 1 : 0); + p_priv->ri_state = ((msg->ri) ? 1 : 0); + + if (old_dcd_state != p_priv->dcd_state && old_dcd_state) + tty_port_tty_hangup(&port->port, true); +resubmit: + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); +exit: ; +} + +static void usa28_glocont_callback(struct urb *urb) +{ +} + + +static void usa49_glocont_callback(struct urb *urb) +{ + struct usb_serial *serial; + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + int i; + + serial = urb->context; + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + p_priv = usb_get_serial_port_data(port); + + if (p_priv->resend_cont) { + dev_dbg(&port->dev, "%s - sending setup\n", __func__); + keyspan_usa49_send_setup(serial, port, + p_priv->resend_cont - 1); + break; + } + } +} + + /* This is actually called glostat in the Keyspan + doco */ +static void usa49_instat_callback(struct urb *urb) +{ + int err; + unsigned char *data = urb->transfer_buffer; + struct keyspan_usa49_portStatusMessage *msg; + struct usb_serial *serial; + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + int old_dcd_state; + int status = urb->status; + + serial = urb->context; + + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); + return; + } + + if (urb->actual_length != + sizeof(struct keyspan_usa49_portStatusMessage)) { + dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); + goto exit; + } + + msg = (struct keyspan_usa49_portStatusMessage *)data; + + /* Check port number from message and retrieve private data */ + if (msg->portNumber >= serial->num_ports) { + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", + __func__, msg->portNumber); + goto exit; + } + port = serial->port[msg->portNumber]; + p_priv = usb_get_serial_port_data(port); + if (!p_priv) + goto resubmit; + + /* Update handshaking pin state information */ + old_dcd_state = p_priv->dcd_state; + p_priv->cts_state = ((msg->cts) ? 1 : 0); + p_priv->dsr_state = ((msg->dsr) ? 1 : 0); + p_priv->dcd_state = ((msg->dcd) ? 1 : 0); + p_priv->ri_state = ((msg->ri) ? 1 : 0); + + if (old_dcd_state != p_priv->dcd_state && old_dcd_state) + tty_port_tty_hangup(&port->port, true); +resubmit: + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); +exit: ; +} + +static void usa49_inack_callback(struct urb *urb) +{ +} + +static void usa49_indat_callback(struct urb *urb) +{ + int i, err; + int endpoint; + struct usb_serial_port *port; + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + + endpoint = usb_pipeendpoint(urb->pipe); + + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n", + __func__, status, endpoint); + return; + } + + port = urb->context; + if (urb->actual_length) { + /* 0x80 bit is error flag */ + if ((data[0] & 0x80) == 0) { + /* no error on any byte */ + tty_insert_flip_string(&port->port, data + 1, + urb->actual_length - 1); + } else { + /* some bytes had errors, every byte has status */ + for (i = 0; i + 1 < urb->actual_length; i += 2) { + int stat = data[i]; + int flag = TTY_NORMAL; + + if (stat & RXERROR_OVERRUN) { + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } + /* XXX should handle break (0x10) */ + if (stat & RXERROR_PARITY) + flag = TTY_PARITY; + else if (stat & RXERROR_FRAMING) + flag = TTY_FRAME; + + tty_insert_flip_char(&port->port, data[i+1], + flag); + } + } + tty_flip_buffer_push(&port->port); + } + + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); +} + +static void usa49wg_indat_callback(struct urb *urb) +{ + int i, len, x, err; + struct usb_serial *serial; + struct usb_serial_port *port; + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + + serial = urb->context; + + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); + return; + } + + /* inbound data is in the form P#, len, status, data */ + i = 0; + len = 0; + + while (i < urb->actual_length) { + + /* Check port number from message */ + if (data[i] >= serial->num_ports) { + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", + __func__, data[i]); + return; + } + port = serial->port[data[i++]]; + len = data[i++]; + + /* 0x80 bit is error flag */ + if ((data[i] & 0x80) == 0) { + /* no error on any byte */ + i++; + for (x = 1; x < len && i < urb->actual_length; ++x) + tty_insert_flip_char(&port->port, + data[i++], 0); + } else { + /* + * some bytes had errors, every byte has status + */ + for (x = 0; x + 1 < len && + i + 1 < urb->actual_length; x += 2) { + int stat = data[i]; + int flag = TTY_NORMAL; + + if (stat & RXERROR_OVERRUN) { + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } + /* XXX should handle break (0x10) */ + if (stat & RXERROR_PARITY) + flag = TTY_PARITY; + else if (stat & RXERROR_FRAMING) + flag = TTY_FRAME; + + tty_insert_flip_char(&port->port, data[i+1], + flag); + i += 2; + } + } + tty_flip_buffer_push(&port->port); + } + + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&urb->dev->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); +} + +/* not used, usa-49 doesn't have per-port control endpoints */ +static void usa49_outcont_callback(struct urb *urb) +{ +} + +static void usa90_indat_callback(struct urb *urb) +{ + int i, err; + int endpoint; + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + + endpoint = usb_pipeendpoint(urb->pipe); + + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x on endpoint %d.\n", + __func__, status, endpoint); + return; + } + + port = urb->context; + p_priv = usb_get_serial_port_data(port); + + if (urb->actual_length) { + /* if current mode is DMA, looks like usa28 format + otherwise looks like usa26 data format */ + + if (p_priv->baud > 57600) + tty_insert_flip_string(&port->port, data, + urb->actual_length); + else { + /* 0x80 bit is error flag */ + if ((data[0] & 0x80) == 0) { + /* no errors on individual bytes, only + possible overrun err*/ + if (data[0] & RXERROR_OVERRUN) { + tty_insert_flip_char(&port->port, 0, + TTY_OVERRUN); + } + for (i = 1; i < urb->actual_length ; ++i) + tty_insert_flip_char(&port->port, + data[i], TTY_NORMAL); + } else { + /* some bytes had errors, every byte has status */ + dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__); + for (i = 0; i + 1 < urb->actual_length; i += 2) { + int stat = data[i]; + int flag = TTY_NORMAL; + + if (stat & RXERROR_OVERRUN) { + tty_insert_flip_char( + &port->port, 0, + TTY_OVERRUN); + } + /* XXX should handle break (0x10) */ + if (stat & RXERROR_PARITY) + flag = TTY_PARITY; + else if (stat & RXERROR_FRAMING) + flag = TTY_FRAME; + + tty_insert_flip_char(&port->port, + data[i+1], flag); + } + } + } + tty_flip_buffer_push(&port->port); + } + + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); +} + + +static void usa90_instat_callback(struct urb *urb) +{ + unsigned char *data = urb->transfer_buffer; + struct keyspan_usa90_portStatusMessage *msg; + struct usb_serial *serial; + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + int old_dcd_state, err; + int status = urb->status; + + serial = urb->context; + + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); + return; + } + if (urb->actual_length < 14) { + dev_dbg(&urb->dev->dev, "%s - %d byte report??\n", __func__, urb->actual_length); + goto exit; + } + + msg = (struct keyspan_usa90_portStatusMessage *)data; + + /* Now do something useful with the data */ + + port = serial->port[0]; + p_priv = usb_get_serial_port_data(port); + if (!p_priv) + goto resubmit; + + /* Update handshaking pin state information */ + old_dcd_state = p_priv->dcd_state; + p_priv->cts_state = ((msg->cts) ? 1 : 0); + p_priv->dsr_state = ((msg->dsr) ? 1 : 0); + p_priv->dcd_state = ((msg->dcd) ? 1 : 0); + p_priv->ri_state = ((msg->ri) ? 1 : 0); + + if (old_dcd_state != p_priv->dcd_state && old_dcd_state) + tty_port_tty_hangup(&port->port, true); +resubmit: + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); +exit: + ; +} + +static void usa90_outcont_callback(struct urb *urb) +{ + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + + port = urb->context; + p_priv = usb_get_serial_port_data(port); + + if (p_priv->resend_cont) { + dev_dbg(&urb->dev->dev, "%s - sending setup\n", __func__); + keyspan_usa90_send_setup(port->serial, port, + p_priv->resend_cont - 1); + } +} + +/* Status messages from the 28xg */ +static void usa67_instat_callback(struct urb *urb) +{ + int err; + unsigned char *data = urb->transfer_buffer; + struct keyspan_usa67_portStatusMessage *msg; + struct usb_serial *serial; + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + int old_dcd_state; + int status = urb->status; + + serial = urb->context; + + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero status: %x\n", __func__, status); + return; + } + + if (urb->actual_length != + sizeof(struct keyspan_usa67_portStatusMessage)) { + dev_dbg(&urb->dev->dev, "%s - bad length %d\n", __func__, urb->actual_length); + return; + } + + + /* Now do something useful with the data */ + msg = (struct keyspan_usa67_portStatusMessage *)data; + + /* Check port number from message and retrieve private data */ + if (msg->port >= serial->num_ports) { + dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); + return; + } + + port = serial->port[msg->port]; + p_priv = usb_get_serial_port_data(port); + if (!p_priv) + goto resubmit; + + /* Update handshaking pin state information */ + old_dcd_state = p_priv->dcd_state; + p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0); + p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0); + + if (old_dcd_state != p_priv->dcd_state && old_dcd_state) + tty_port_tty_hangup(&port->port, true); +resubmit: + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - resubmit read urb failed. (%d)\n", __func__, err); +} + +static void usa67_glocont_callback(struct urb *urb) +{ + struct usb_serial *serial; + struct usb_serial_port *port; + struct keyspan_port_private *p_priv; + int i; + + serial = urb->context; + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + p_priv = usb_get_serial_port_data(port); + + if (p_priv->resend_cont) { + dev_dbg(&port->dev, "%s - sending setup\n", __func__); + keyspan_usa67_send_setup(serial, port, + p_priv->resend_cont - 1); + break; + } + } +} + +static int keyspan_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + int flip; + int data_len; + struct urb *this_urb; + + p_priv = usb_get_serial_port_data(port); + d_details = p_priv->device_details; + + /* FIXME: locking */ + if (d_details->msg_format == msg_usa90) + data_len = 64; + else + data_len = 63; + + flip = p_priv->out_flip; + + /* Check both endpoints to see if any are available. */ + this_urb = p_priv->out_urbs[flip]; + if (this_urb != NULL) { + if (this_urb->status != -EINPROGRESS) + return data_len; + flip = (flip + 1) & d_details->outdat_endp_flip; + this_urb = p_priv->out_urbs[flip]; + if (this_urb != NULL) { + if (this_urb->status != -EINPROGRESS) + return data_len; + } + } + return 0; +} + + +static int keyspan_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + int i, err; + int baud_rate, device_port; + struct urb *urb; + unsigned int cflag = 0; + + p_priv = usb_get_serial_port_data(port); + d_details = p_priv->device_details; + + /* Set some sane defaults */ + p_priv->rts_state = 1; + p_priv->dtr_state = 1; + p_priv->baud = 9600; + + /* force baud and lcr to be set on open */ + p_priv->old_baud = 0; + p_priv->old_cflag = 0; + + p_priv->out_flip = 0; + p_priv->in_flip = 0; + + /* Reset low level data toggle and start reading from endpoints */ + for (i = 0; i < 2; i++) { + urb = p_priv->in_urbs[i]; + if (urb == NULL) + continue; + + /* make sure endpoint data toggle is synchronized + with the device */ + usb_clear_halt(urb->dev, urb->pipe); + err = usb_submit_urb(urb, GFP_KERNEL); + if (err != 0) + dev_dbg(&port->dev, "%s - submit urb %d failed (%d)\n", __func__, i, err); + } + + /* Reset low level data toggle on out endpoints */ + for (i = 0; i < 2; i++) { + urb = p_priv->out_urbs[i]; + if (urb == NULL) + continue; + /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), + usb_pipeout(urb->pipe), 0); */ + } + + /* get the terminal config for the setup message now so we don't + * need to send 2 of them */ + + device_port = port->port_number; + if (tty) { + cflag = tty->termios.c_cflag; + /* Baud rate calculation takes baud rate as an integer + so other rates can be generated if desired. */ + baud_rate = tty_get_baud_rate(tty); + /* If no match or invalid, leave as default */ + if (baud_rate >= 0 + && d_details->calculate_baud_rate(port, baud_rate, d_details->baudclk, + NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { + p_priv->baud = baud_rate; + } + } + /* set CTS/RTS handshake etc. */ + p_priv->cflag = cflag; + p_priv->flow_control = (cflag & CRTSCTS) ? flow_cts : flow_none; + + keyspan_send_setup(port, 1); + /* mdelay(100); */ + /* keyspan_set_termios(port, NULL); */ + + return 0; +} + +static inline void stop_urb(struct urb *urb) +{ + if (urb && urb->status == -EINPROGRESS) + usb_kill_urb(urb); +} + +static void keyspan_dtr_rts(struct usb_serial_port *port, int on) +{ + struct keyspan_port_private *p_priv = usb_get_serial_port_data(port); + + p_priv->rts_state = on; + p_priv->dtr_state = on; + keyspan_send_setup(port, 0); +} + +static void keyspan_close(struct usb_serial_port *port) +{ + int i; + struct keyspan_port_private *p_priv; + + p_priv = usb_get_serial_port_data(port); + + p_priv->rts_state = 0; + p_priv->dtr_state = 0; + + keyspan_send_setup(port, 2); + /* pilot-xfer seems to work best with this delay */ + mdelay(100); + + p_priv->out_flip = 0; + p_priv->in_flip = 0; + + stop_urb(p_priv->inack_urb); + for (i = 0; i < 2; i++) { + stop_urb(p_priv->in_urbs[i]); + stop_urb(p_priv->out_urbs[i]); + } +} + +/* download the firmware to a pre-renumeration device */ +static int keyspan_fake_startup(struct usb_serial *serial) +{ + char *fw_name; + + dev_dbg(&serial->dev->dev, "Keyspan startup version %04x product %04x\n", + le16_to_cpu(serial->dev->descriptor.bcdDevice), + le16_to_cpu(serial->dev->descriptor.idProduct)); + + if ((le16_to_cpu(serial->dev->descriptor.bcdDevice) & 0x8000) + != 0x8000) { + dev_dbg(&serial->dev->dev, "Firmware already loaded. Quitting.\n"); + return 1; + } + + /* Select firmware image on the basis of idProduct */ + switch (le16_to_cpu(serial->dev->descriptor.idProduct)) { + case keyspan_usa28_pre_product_id: + fw_name = "keyspan/usa28.fw"; + break; + + case keyspan_usa28x_pre_product_id: + fw_name = "keyspan/usa28x.fw"; + break; + + case keyspan_usa28xa_pre_product_id: + fw_name = "keyspan/usa28xa.fw"; + break; + + case keyspan_usa28xb_pre_product_id: + fw_name = "keyspan/usa28xb.fw"; + break; + + case keyspan_usa19_pre_product_id: + fw_name = "keyspan/usa19.fw"; + break; + + case keyspan_usa19qi_pre_product_id: + fw_name = "keyspan/usa19qi.fw"; + break; + + case keyspan_mpr_pre_product_id: + fw_name = "keyspan/mpr.fw"; + break; + + case keyspan_usa19qw_pre_product_id: + fw_name = "keyspan/usa19qw.fw"; + break; + + case keyspan_usa18x_pre_product_id: + fw_name = "keyspan/usa18x.fw"; + break; + + case keyspan_usa19w_pre_product_id: + fw_name = "keyspan/usa19w.fw"; + break; + + case keyspan_usa49w_pre_product_id: + fw_name = "keyspan/usa49w.fw"; + break; + + case keyspan_usa49wlc_pre_product_id: + fw_name = "keyspan/usa49wlc.fw"; + break; + + default: + dev_err(&serial->dev->dev, "Unknown product ID (%04x)\n", + le16_to_cpu(serial->dev->descriptor.idProduct)); + return 1; + } + + dev_dbg(&serial->dev->dev, "Uploading Keyspan %s firmware.\n", fw_name); + + if (ezusb_fx1_ihex_firmware_download(serial->dev, fw_name) < 0) { + dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n", + fw_name); + return -ENOENT; + } + + /* after downloading firmware Renumeration will occur in a + moment and the new device will bind to the real driver */ + + /* we don't want this device to have a driver assigned to it. */ + return 1; +} + +/* Helper functions used by keyspan_setup_urbs */ +static struct usb_endpoint_descriptor const *find_ep(struct usb_serial const *serial, + int endpoint) +{ + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *ep; + int i; + + iface_desc = serial->interface->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + ep = &iface_desc->endpoint[i].desc; + if (ep->bEndpointAddress == endpoint) + return ep; + } + dev_warn(&serial->interface->dev, "found no endpoint descriptor for " + "endpoint %x\n", endpoint); + return NULL; +} + +static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint, + int dir, void *ctx, char *buf, int len, + void (*callback)(struct urb *)) +{ + struct urb *urb; + struct usb_endpoint_descriptor const *ep_desc; + char const *ep_type_name; + + if (endpoint == -1) + return NULL; /* endpoint not needed */ + + dev_dbg(&serial->interface->dev, "%s - alloc for endpoint %d.\n", __func__, endpoint); + urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ + if (!urb) + return NULL; + + if (endpoint == 0) { + /* control EP filled in when used */ + return urb; + } + + ep_desc = find_ep(serial, endpoint); + if (!ep_desc) { + /* leak the urb, something's wrong and the callers don't care */ + return urb; + } + if (usb_endpoint_xfer_int(ep_desc)) { + ep_type_name = "INT"; + usb_fill_int_urb(urb, serial->dev, + usb_sndintpipe(serial->dev, endpoint) | dir, + buf, len, callback, ctx, + ep_desc->bInterval); + } else if (usb_endpoint_xfer_bulk(ep_desc)) { + ep_type_name = "BULK"; + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, endpoint) | dir, + buf, len, callback, ctx); + } else { + dev_warn(&serial->interface->dev, + "unsupported endpoint type %x\n", + usb_endpoint_type(ep_desc)); + usb_free_urb(urb); + return NULL; + } + + dev_dbg(&serial->interface->dev, "%s - using urb %p for %s endpoint %x\n", + __func__, urb, ep_type_name, endpoint); + return urb; +} + +static struct callbacks { + void (*instat_callback)(struct urb *); + void (*glocont_callback)(struct urb *); + void (*indat_callback)(struct urb *); + void (*outdat_callback)(struct urb *); + void (*inack_callback)(struct urb *); + void (*outcont_callback)(struct urb *); +} keyspan_callbacks[] = { + { + /* msg_usa26 callbacks */ + .instat_callback = usa26_instat_callback, + .glocont_callback = usa26_glocont_callback, + .indat_callback = usa26_indat_callback, + .outdat_callback = usa2x_outdat_callback, + .inack_callback = usa26_inack_callback, + .outcont_callback = usa26_outcont_callback, + }, { + /* msg_usa28 callbacks */ + .instat_callback = usa28_instat_callback, + .glocont_callback = usa28_glocont_callback, + .indat_callback = usa28_indat_callback, + .outdat_callback = usa2x_outdat_callback, + .inack_callback = usa28_inack_callback, + .outcont_callback = usa28_outcont_callback, + }, { + /* msg_usa49 callbacks */ + .instat_callback = usa49_instat_callback, + .glocont_callback = usa49_glocont_callback, + .indat_callback = usa49_indat_callback, + .outdat_callback = usa2x_outdat_callback, + .inack_callback = usa49_inack_callback, + .outcont_callback = usa49_outcont_callback, + }, { + /* msg_usa90 callbacks */ + .instat_callback = usa90_instat_callback, + .glocont_callback = usa28_glocont_callback, + .indat_callback = usa90_indat_callback, + .outdat_callback = usa2x_outdat_callback, + .inack_callback = usa28_inack_callback, + .outcont_callback = usa90_outcont_callback, + }, { + /* msg_usa67 callbacks */ + .instat_callback = usa67_instat_callback, + .glocont_callback = usa67_glocont_callback, + .indat_callback = usa26_indat_callback, + .outdat_callback = usa2x_outdat_callback, + .inack_callback = usa26_inack_callback, + .outcont_callback = usa26_outcont_callback, + } +}; + + /* Generic setup urbs function that uses + data in device_details */ +static void keyspan_setup_urbs(struct usb_serial *serial) +{ + struct keyspan_serial_private *s_priv; + const struct keyspan_device_details *d_details; + struct callbacks *cback; + + s_priv = usb_get_serial_data(serial); + d_details = s_priv->device_details; + + /* Setup values for the various callback routines */ + cback = &keyspan_callbacks[d_details->msg_format]; + + /* Allocate and set up urbs for each one that is in use, + starting with instat endpoints */ + s_priv->instat_urb = keyspan_setup_urb + (serial, d_details->instat_endpoint, USB_DIR_IN, + serial, s_priv->instat_buf, INSTAT_BUFLEN, + cback->instat_callback); + + s_priv->indat_urb = keyspan_setup_urb + (serial, d_details->indat_endpoint, USB_DIR_IN, + serial, s_priv->indat_buf, INDAT49W_BUFLEN, + usa49wg_indat_callback); + + s_priv->glocont_urb = keyspan_setup_urb + (serial, d_details->glocont_endpoint, USB_DIR_OUT, + serial, s_priv->glocont_buf, GLOCONT_BUFLEN, + cback->glocont_callback); +} + +/* usa19 function doesn't require prescaler */ +static int keyspan_usa19_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, + u8 *rate_low, u8 *prescaler, int portnum) +{ + u32 b16, /* baud rate times 16 (actual rate used internally) */ + div, /* divisor */ + cnt; /* inverse of divisor (programmed into 8051) */ + + dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); + + /* prevent divide by zero... */ + b16 = baud_rate * 16L; + if (b16 == 0) + return KEYSPAN_INVALID_BAUD_RATE; + /* Any "standard" rate over 57k6 is marginal on the USA-19 + as we run out of divisor resolution. */ + if (baud_rate > 57600) + return KEYSPAN_INVALID_BAUD_RATE; + + /* calculate the divisor and the counter (its inverse) */ + div = baudclk / b16; + if (div == 0) + return KEYSPAN_INVALID_BAUD_RATE; + else + cnt = 0 - div; + + if (div > 0xffff) + return KEYSPAN_INVALID_BAUD_RATE; + + /* return the counter values if non-null */ + if (rate_low) + *rate_low = (u8) (cnt & 0xff); + if (rate_hi) + *rate_hi = (u8) ((cnt >> 8) & 0xff); + if (rate_low && rate_hi) + dev_dbg(&port->dev, "%s - %d %02x %02x.\n", + __func__, baud_rate, *rate_hi, *rate_low); + return KEYSPAN_BAUD_RATE_OK; +} + +/* usa19hs function doesn't require prescaler */ +static int keyspan_usa19hs_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, + u8 *rate_low, u8 *prescaler, int portnum) +{ + u32 b16, /* baud rate times 16 (actual rate used internally) */ + div; /* divisor */ + + dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); + + /* prevent divide by zero... */ + b16 = baud_rate * 16L; + if (b16 == 0) + return KEYSPAN_INVALID_BAUD_RATE; + + /* calculate the divisor */ + div = baudclk / b16; + if (div == 0) + return KEYSPAN_INVALID_BAUD_RATE; + + if (div > 0xffff) + return KEYSPAN_INVALID_BAUD_RATE; + + /* return the counter values if non-null */ + if (rate_low) + *rate_low = (u8) (div & 0xff); + + if (rate_hi) + *rate_hi = (u8) ((div >> 8) & 0xff); + + if (rate_low && rate_hi) + dev_dbg(&port->dev, "%s - %d %02x %02x.\n", + __func__, baud_rate, *rate_hi, *rate_low); + + return KEYSPAN_BAUD_RATE_OK; +} + +static int keyspan_usa19w_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, + u8 *rate_low, u8 *prescaler, int portnum) +{ + u32 b16, /* baud rate times 16 (actual rate used internally) */ + clk, /* clock with 13/8 prescaler */ + div, /* divisor using 13/8 prescaler */ + res, /* resulting baud rate using 13/8 prescaler */ + diff, /* error using 13/8 prescaler */ + smallest_diff; + u8 best_prescaler; + int i; + + dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); + + /* prevent divide by zero */ + b16 = baud_rate * 16L; + if (b16 == 0) + return KEYSPAN_INVALID_BAUD_RATE; + + /* Calculate prescaler by trying them all and looking + for best fit */ + + /* start with largest possible difference */ + smallest_diff = 0xffffffff; + + /* 0 is an invalid prescaler, used as a flag */ + best_prescaler = 0; + + for (i = 8; i <= 0xff; ++i) { + clk = (baudclk * 8) / (u32) i; + + div = clk / b16; + if (div == 0) + continue; + + res = clk / div; + diff = (res > b16) ? (res-b16) : (b16-res); + + if (diff < smallest_diff) { + best_prescaler = i; + smallest_diff = diff; + } + } + + if (best_prescaler == 0) + return KEYSPAN_INVALID_BAUD_RATE; + + clk = (baudclk * 8) / (u32) best_prescaler; + div = clk / b16; + + /* return the divisor and prescaler if non-null */ + if (rate_low) + *rate_low = (u8) (div & 0xff); + if (rate_hi) + *rate_hi = (u8) ((div >> 8) & 0xff); + if (prescaler) { + *prescaler = best_prescaler; + /* dev_dbg(&port->dev, "%s - %d %d\n", __func__, *prescaler, div); */ + } + return KEYSPAN_BAUD_RATE_OK; +} + + /* USA-28 supports different maximum baud rates on each port */ +static int keyspan_usa28_calc_baud(struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, u8 *rate_hi, + u8 *rate_low, u8 *prescaler, int portnum) +{ + u32 b16, /* baud rate times 16 (actual rate used internally) */ + div, /* divisor */ + cnt; /* inverse of divisor (programmed into 8051) */ + + dev_dbg(&port->dev, "%s - %d.\n", __func__, baud_rate); + + /* prevent divide by zero */ + b16 = baud_rate * 16L; + if (b16 == 0) + return KEYSPAN_INVALID_BAUD_RATE; + + /* calculate the divisor and the counter (its inverse) */ + div = KEYSPAN_USA28_BAUDCLK / b16; + if (div == 0) + return KEYSPAN_INVALID_BAUD_RATE; + else + cnt = 0 - div; + + /* check for out of range, based on portnum, + and return result */ + if (portnum == 0) { + if (div > 0xffff) + return KEYSPAN_INVALID_BAUD_RATE; + } else { + if (portnum == 1) { + if (div > 0xff) + return KEYSPAN_INVALID_BAUD_RATE; + } else + return KEYSPAN_INVALID_BAUD_RATE; + } + + /* return the counter values if not NULL + (port 1 will ignore retHi) */ + if (rate_low) + *rate_low = (u8) (cnt & 0xff); + if (rate_hi) + *rate_hi = (u8) ((cnt >> 8) & 0xff); + dev_dbg(&port->dev, "%s - %d OK.\n", __func__, baud_rate); + return KEYSPAN_BAUD_RATE_OK; +} + +static int keyspan_usa26_send_setup(struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port) +{ + struct keyspan_usa26_portControlMessage msg; + struct keyspan_serial_private *s_priv; + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + struct urb *this_urb; + int device_port, err; + + dev_dbg(&port->dev, "%s reset=%d\n", __func__, reset_port); + + s_priv = usb_get_serial_data(serial); + p_priv = usb_get_serial_port_data(port); + d_details = s_priv->device_details; + device_port = port->port_number; + + this_urb = p_priv->outcont_urb; + + /* Make sure we have an urb then send the message */ + if (this_urb == NULL) { + dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); + return -1; + } + + dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe)); + + /* Save reset port val for resend. + Don't overwrite resend for open/close condition. */ + if ((reset_port + 1) > p_priv->resend_cont) + p_priv->resend_cont = reset_port + 1; + if (this_urb->status == -EINPROGRESS) { + /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ + mdelay(5); + return -1; + } + + memset(&msg, 0, sizeof(struct keyspan_usa26_portControlMessage)); + + /* Only set baud rate if it's changed */ + if (p_priv->old_baud != p_priv->baud) { + p_priv->old_baud = p_priv->baud; + msg.setClocking = 0xff; + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &msg.prescaler, + device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", + __func__, p_priv->baud); + msg.baudLo = 0; + msg.baudHi = 125; /* Values for 9600 baud */ + msg.prescaler = 10; + } + msg.setPrescaler = 0xff; + } + + msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1; + switch (p_priv->cflag & CSIZE) { + case CS5: + msg.lcr |= USA_DATABITS_5; + break; + case CS6: + msg.lcr |= USA_DATABITS_6; + break; + case CS7: + msg.lcr |= USA_DATABITS_7; + break; + case CS8: + msg.lcr |= USA_DATABITS_8; + break; + } + if (p_priv->cflag & PARENB) { + /* note USA_PARITY_NONE == 0 */ + msg.lcr |= (p_priv->cflag & PARODD) ? + USA_PARITY_ODD : USA_PARITY_EVEN; + } + msg.setLcr = 0xff; + + msg.ctsFlowControl = (p_priv->flow_control == flow_cts); + msg.xonFlowControl = 0; + msg.setFlowControl = 0xff; + msg.forwardingLength = 16; + msg.xonChar = 17; + msg.xoffChar = 19; + + /* Opening port */ + if (reset_port == 1) { + msg._txOn = 1; + msg._txOff = 0; + msg.txFlush = 0; + msg.txBreak = 0; + msg.rxOn = 1; + msg.rxOff = 0; + msg.rxFlush = 1; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0xff; + } + + /* Closing port */ + else if (reset_port == 2) { + msg._txOn = 0; + msg._txOff = 1; + msg.txFlush = 0; + msg.txBreak = 0; + msg.rxOn = 0; + msg.rxOff = 1; + msg.rxFlush = 1; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0; + } + + /* Sending intermediate configs */ + else { + msg._txOn = (!p_priv->break_on); + msg._txOff = 0; + msg.txFlush = 0; + msg.txBreak = (p_priv->break_on); + msg.rxOn = 0; + msg.rxOff = 0; + msg.rxFlush = 0; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0x0; + } + + /* Do handshaking outputs */ + msg.setTxTriState_setRts = 0xff; + msg.txTriState_rts = p_priv->rts_state; + + msg.setHskoa_setDtr = 0xff; + msg.hskoa_dtr = p_priv->dtr_state; + + p_priv->resend_cont = 0; + memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); + + /* send the data out the device on control endpoint */ + this_urb->transfer_buffer_length = sizeof(msg); + + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); + return 0; +} + +static int keyspan_usa28_send_setup(struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port) +{ + struct keyspan_usa28_portControlMessage msg; + struct keyspan_serial_private *s_priv; + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + struct urb *this_urb; + int device_port, err; + + s_priv = usb_get_serial_data(serial); + p_priv = usb_get_serial_port_data(port); + d_details = s_priv->device_details; + device_port = port->port_number; + + /* only do something if we have a bulk out endpoint */ + this_urb = p_priv->outcont_urb; + if (this_urb == NULL) { + dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); + return -1; + } + + /* Save reset port val for resend. + Don't overwrite resend for open/close condition. */ + if ((reset_port + 1) > p_priv->resend_cont) + p_priv->resend_cont = reset_port + 1; + if (this_urb->status == -EINPROGRESS) { + dev_dbg(&port->dev, "%s already writing\n", __func__); + mdelay(5); + return -1; + } + + memset(&msg, 0, sizeof(struct keyspan_usa28_portControlMessage)); + + msg.setBaudRate = 1; + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, NULL, + device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate requested %d.\n", + __func__, p_priv->baud); + msg.baudLo = 0xff; + msg.baudHi = 0xb2; /* Values for 9600 baud */ + } + + /* If parity is enabled, we must calculate it ourselves. */ + msg.parity = 0; /* XXX for now */ + + msg.ctsFlowControl = (p_priv->flow_control == flow_cts); + msg.xonFlowControl = 0; + + /* Do handshaking outputs, DTR is inverted relative to RTS */ + msg.rts = p_priv->rts_state; + msg.dtr = p_priv->dtr_state; + + msg.forwardingLength = 16; + msg.forwardMs = 10; + msg.breakThreshold = 45; + msg.xonChar = 17; + msg.xoffChar = 19; + + /*msg.returnStatus = 1; + msg.resetDataToggle = 0xff;*/ + /* Opening port */ + if (reset_port == 1) { + msg._txOn = 1; + msg._txOff = 0; + msg.txFlush = 0; + msg.txForceXoff = 0; + msg.txBreak = 0; + msg.rxOn = 1; + msg.rxOff = 0; + msg.rxFlush = 1; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0xff; + } + /* Closing port */ + else if (reset_port == 2) { + msg._txOn = 0; + msg._txOff = 1; + msg.txFlush = 0; + msg.txForceXoff = 0; + msg.txBreak = 0; + msg.rxOn = 0; + msg.rxOff = 1; + msg.rxFlush = 1; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0; + } + /* Sending intermediate configs */ + else { + msg._txOn = (!p_priv->break_on); + msg._txOff = 0; + msg.txFlush = 0; + msg.txForceXoff = 0; + msg.txBreak = (p_priv->break_on); + msg.rxOn = 0; + msg.rxOff = 0; + msg.rxFlush = 0; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0x0; + } + + p_priv->resend_cont = 0; + memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); + + /* send the data out the device on control endpoint */ + this_urb->transfer_buffer_length = sizeof(msg); + + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed\n", __func__); + + return 0; +} + +static int keyspan_usa49_send_setup(struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port) +{ + struct keyspan_usa49_portControlMessage msg; + struct usb_ctrlrequest *dr = NULL; + struct keyspan_serial_private *s_priv; + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + struct urb *this_urb; + int err, device_port; + + s_priv = usb_get_serial_data(serial); + p_priv = usb_get_serial_port_data(port); + d_details = s_priv->device_details; + + this_urb = s_priv->glocont_urb; + + /* Work out which port within the device is being setup */ + device_port = port->port_number; + + /* Make sure we have an urb then send the message */ + if (this_urb == NULL) { + dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__); + return -1; + } + + dev_dbg(&port->dev, "%s - endpoint %d (%d)\n", + __func__, usb_pipeendpoint(this_urb->pipe), device_port); + + /* Save reset port val for resend. + Don't overwrite resend for open/close condition. */ + if ((reset_port + 1) > p_priv->resend_cont) + p_priv->resend_cont = reset_port + 1; + + if (this_urb->status == -EINPROGRESS) { + /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ + mdelay(5); + return -1; + } + + memset(&msg, 0, sizeof(struct keyspan_usa49_portControlMessage)); + + msg.portNumber = device_port; + + /* Only set baud rate if it's changed */ + if (p_priv->old_baud != p_priv->baud) { + p_priv->old_baud = p_priv->baud; + msg.setClocking = 0xff; + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &msg.prescaler, + device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", + __func__, p_priv->baud); + msg.baudLo = 0; + msg.baudHi = 125; /* Values for 9600 baud */ + msg.prescaler = 10; + } + /* msg.setPrescaler = 0xff; */ + } + + msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1; + switch (p_priv->cflag & CSIZE) { + case CS5: + msg.lcr |= USA_DATABITS_5; + break; + case CS6: + msg.lcr |= USA_DATABITS_6; + break; + case CS7: + msg.lcr |= USA_DATABITS_7; + break; + case CS8: + msg.lcr |= USA_DATABITS_8; + break; + } + if (p_priv->cflag & PARENB) { + /* note USA_PARITY_NONE == 0 */ + msg.lcr |= (p_priv->cflag & PARODD) ? + USA_PARITY_ODD : USA_PARITY_EVEN; + } + msg.setLcr = 0xff; + + msg.ctsFlowControl = (p_priv->flow_control == flow_cts); + msg.xonFlowControl = 0; + msg.setFlowControl = 0xff; + + msg.forwardingLength = 16; + msg.xonChar = 17; + msg.xoffChar = 19; + + /* Opening port */ + if (reset_port == 1) { + msg._txOn = 1; + msg._txOff = 0; + msg.txFlush = 0; + msg.txBreak = 0; + msg.rxOn = 1; + msg.rxOff = 0; + msg.rxFlush = 1; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0xff; + msg.enablePort = 1; + msg.disablePort = 0; + } + /* Closing port */ + else if (reset_port == 2) { + msg._txOn = 0; + msg._txOff = 1; + msg.txFlush = 0; + msg.txBreak = 0; + msg.rxOn = 0; + msg.rxOff = 1; + msg.rxFlush = 1; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0; + msg.enablePort = 0; + msg.disablePort = 1; + } + /* Sending intermediate configs */ + else { + msg._txOn = (!p_priv->break_on); + msg._txOff = 0; + msg.txFlush = 0; + msg.txBreak = (p_priv->break_on); + msg.rxOn = 0; + msg.rxOff = 0; + msg.rxFlush = 0; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0x0; + msg.enablePort = 0; + msg.disablePort = 0; + } + + /* Do handshaking outputs */ + msg.setRts = 0xff; + msg.rts = p_priv->rts_state; + + msg.setDtr = 0xff; + msg.dtr = p_priv->dtr_state; + + p_priv->resend_cont = 0; + + /* if the device is a 49wg, we send control message on usb + control EP 0 */ + + if (d_details->product_id == keyspan_usa49wg_product_id) { + dr = (void *)(s_priv->ctrl_buf); + dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT; + dr->bRequest = 0xB0; /* 49wg control message */; + dr->wValue = 0; + dr->wIndex = 0; + dr->wLength = cpu_to_le16(sizeof(msg)); + + memcpy(s_priv->glocont_buf, &msg, sizeof(msg)); + + usb_fill_control_urb(this_urb, serial->dev, + usb_sndctrlpipe(serial->dev, 0), + (unsigned char *)dr, s_priv->glocont_buf, + sizeof(msg), usa49_glocont_callback, serial); + + } else { + memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); + + /* send the data out the device on control endpoint */ + this_urb->transfer_buffer_length = sizeof(msg); + } + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); + + return 0; +} + +static int keyspan_usa90_send_setup(struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port) +{ + struct keyspan_usa90_portControlMessage msg; + struct keyspan_serial_private *s_priv; + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + struct urb *this_urb; + int err; + u8 prescaler; + + s_priv = usb_get_serial_data(serial); + p_priv = usb_get_serial_port_data(port); + d_details = s_priv->device_details; + + /* only do something if we have a bulk out endpoint */ + this_urb = p_priv->outcont_urb; + if (this_urb == NULL) { + dev_dbg(&port->dev, "%s - oops no urb.\n", __func__); + return -1; + } + + /* Save reset port val for resend. + Don't overwrite resend for open/close condition. */ + if ((reset_port + 1) > p_priv->resend_cont) + p_priv->resend_cont = reset_port + 1; + if (this_urb->status == -EINPROGRESS) { + dev_dbg(&port->dev, "%s already writing\n", __func__); + mdelay(5); + return -1; + } + + memset(&msg, 0, sizeof(struct keyspan_usa90_portControlMessage)); + + /* Only set baud rate if it's changed */ + if (p_priv->old_baud != p_priv->baud) { + p_priv->old_baud = p_priv->baud; + msg.setClocking = 0x01; + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", + __func__, p_priv->baud); + p_priv->baud = 9600; + d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &prescaler, 0); + } + msg.setRxMode = 1; + msg.setTxMode = 1; + } + + /* modes must always be correctly specified */ + if (p_priv->baud > 57600) { + msg.rxMode = RXMODE_DMA; + msg.txMode = TXMODE_DMA; + } else { + msg.rxMode = RXMODE_BYHAND; + msg.txMode = TXMODE_BYHAND; + } + + msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1; + switch (p_priv->cflag & CSIZE) { + case CS5: + msg.lcr |= USA_DATABITS_5; + break; + case CS6: + msg.lcr |= USA_DATABITS_6; + break; + case CS7: + msg.lcr |= USA_DATABITS_7; + break; + case CS8: + msg.lcr |= USA_DATABITS_8; + break; + } + if (p_priv->cflag & PARENB) { + /* note USA_PARITY_NONE == 0 */ + msg.lcr |= (p_priv->cflag & PARODD) ? + USA_PARITY_ODD : USA_PARITY_EVEN; + } + if (p_priv->old_cflag != p_priv->cflag) { + p_priv->old_cflag = p_priv->cflag; + msg.setLcr = 0x01; + } + + if (p_priv->flow_control == flow_cts) + msg.txFlowControl = TXFLOW_CTS; + msg.setTxFlowControl = 0x01; + msg.setRxFlowControl = 0x01; + + msg.rxForwardingLength = 16; + msg.rxForwardingTimeout = 16; + msg.txAckSetting = 0; + msg.xonChar = 17; + msg.xoffChar = 19; + + /* Opening port */ + if (reset_port == 1) { + msg.portEnabled = 1; + msg.rxFlush = 1; + msg.txBreak = (p_priv->break_on); + } + /* Closing port */ + else if (reset_port == 2) + msg.portEnabled = 0; + /* Sending intermediate configs */ + else { + msg.portEnabled = 1; + msg.txBreak = (p_priv->break_on); + } + + /* Do handshaking outputs */ + msg.setRts = 0x01; + msg.rts = p_priv->rts_state; + + msg.setDtr = 0x01; + msg.dtr = p_priv->dtr_state; + + p_priv->resend_cont = 0; + memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); + + /* send the data out the device on control endpoint */ + this_urb->transfer_buffer_length = sizeof(msg); + + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); + return 0; +} + +static int keyspan_usa67_send_setup(struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port) +{ + struct keyspan_usa67_portControlMessage msg; + struct keyspan_serial_private *s_priv; + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + struct urb *this_urb; + int err, device_port; + + s_priv = usb_get_serial_data(serial); + p_priv = usb_get_serial_port_data(port); + d_details = s_priv->device_details; + + this_urb = s_priv->glocont_urb; + + /* Work out which port within the device is being setup */ + device_port = port->port_number; + + /* Make sure we have an urb then send the message */ + if (this_urb == NULL) { + dev_dbg(&port->dev, "%s - oops no urb for port.\n", __func__); + return -1; + } + + /* Save reset port val for resend. + Don't overwrite resend for open/close condition. */ + if ((reset_port + 1) > p_priv->resend_cont) + p_priv->resend_cont = reset_port + 1; + if (this_urb->status == -EINPROGRESS) { + /* dev_dbg(&port->dev, "%s - already writing\n", __func__); */ + mdelay(5); + return -1; + } + + memset(&msg, 0, sizeof(struct keyspan_usa67_portControlMessage)); + + msg.port = device_port; + + /* Only set baud rate if it's changed */ + if (p_priv->old_baud != p_priv->baud) { + p_priv->old_baud = p_priv->baud; + msg.setClocking = 0xff; + if (d_details->calculate_baud_rate(port, p_priv->baud, d_details->baudclk, + &msg.baudHi, &msg.baudLo, &msg.prescaler, + device_port) == KEYSPAN_INVALID_BAUD_RATE) { + dev_dbg(&port->dev, "%s - Invalid baud rate %d requested, using 9600.\n", + __func__, p_priv->baud); + msg.baudLo = 0; + msg.baudHi = 125; /* Values for 9600 baud */ + msg.prescaler = 10; + } + msg.setPrescaler = 0xff; + } + + msg.lcr = (p_priv->cflag & CSTOPB) ? STOPBITS_678_2 : STOPBITS_5678_1; + switch (p_priv->cflag & CSIZE) { + case CS5: + msg.lcr |= USA_DATABITS_5; + break; + case CS6: + msg.lcr |= USA_DATABITS_6; + break; + case CS7: + msg.lcr |= USA_DATABITS_7; + break; + case CS8: + msg.lcr |= USA_DATABITS_8; + break; + } + if (p_priv->cflag & PARENB) { + /* note USA_PARITY_NONE == 0 */ + msg.lcr |= (p_priv->cflag & PARODD) ? + USA_PARITY_ODD : USA_PARITY_EVEN; + } + msg.setLcr = 0xff; + + msg.ctsFlowControl = (p_priv->flow_control == flow_cts); + msg.xonFlowControl = 0; + msg.setFlowControl = 0xff; + msg.forwardingLength = 16; + msg.xonChar = 17; + msg.xoffChar = 19; + + if (reset_port == 1) { + /* Opening port */ + msg._txOn = 1; + msg._txOff = 0; + msg.txFlush = 0; + msg.txBreak = 0; + msg.rxOn = 1; + msg.rxOff = 0; + msg.rxFlush = 1; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0xff; + } else if (reset_port == 2) { + /* Closing port */ + msg._txOn = 0; + msg._txOff = 1; + msg.txFlush = 0; + msg.txBreak = 0; + msg.rxOn = 0; + msg.rxOff = 1; + msg.rxFlush = 1; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0; + } else { + /* Sending intermediate configs */ + msg._txOn = (!p_priv->break_on); + msg._txOff = 0; + msg.txFlush = 0; + msg.txBreak = (p_priv->break_on); + msg.rxOn = 0; + msg.rxOff = 0; + msg.rxFlush = 0; + msg.rxForward = 0; + msg.returnStatus = 0; + msg.resetDataToggle = 0x0; + } + + /* Do handshaking outputs */ + msg.setTxTriState_setRts = 0xff; + msg.txTriState_rts = p_priv->rts_state; + + msg.setHskoa_setDtr = 0xff; + msg.hskoa_dtr = p_priv->dtr_state; + + p_priv->resend_cont = 0; + + memcpy(this_urb->transfer_buffer, &msg, sizeof(msg)); + + /* send the data out the device on control endpoint */ + this_urb->transfer_buffer_length = sizeof(msg); + + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err != 0) + dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); + return 0; +} + +static void keyspan_send_setup(struct usb_serial_port *port, int reset_port) +{ + struct usb_serial *serial = port->serial; + struct keyspan_serial_private *s_priv; + const struct keyspan_device_details *d_details; + + s_priv = usb_get_serial_data(serial); + d_details = s_priv->device_details; + + switch (d_details->msg_format) { + case msg_usa26: + keyspan_usa26_send_setup(serial, port, reset_port); + break; + case msg_usa28: + keyspan_usa28_send_setup(serial, port, reset_port); + break; + case msg_usa49: + keyspan_usa49_send_setup(serial, port, reset_port); + break; + case msg_usa90: + keyspan_usa90_send_setup(serial, port, reset_port); + break; + case msg_usa67: + keyspan_usa67_send_setup(serial, port, reset_port); + break; + } +} + + +/* Gets called by the "real" driver (ie once firmware is loaded + and renumeration has taken place. */ +static int keyspan_startup(struct usb_serial *serial) +{ + int i, err; + struct keyspan_serial_private *s_priv; + const struct keyspan_device_details *d_details; + + for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i) + if (d_details->product_id == + le16_to_cpu(serial->dev->descriptor.idProduct)) + break; + if (d_details == NULL) { + dev_err(&serial->dev->dev, "%s - unknown product id %x\n", + __func__, le16_to_cpu(serial->dev->descriptor.idProduct)); + return -ENODEV; + } + + /* Setup private data for serial driver */ + s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL); + if (!s_priv) + return -ENOMEM; + + s_priv->instat_buf = kzalloc(INSTAT_BUFLEN, GFP_KERNEL); + if (!s_priv->instat_buf) + goto err_instat_buf; + + s_priv->indat_buf = kzalloc(INDAT49W_BUFLEN, GFP_KERNEL); + if (!s_priv->indat_buf) + goto err_indat_buf; + + s_priv->glocont_buf = kzalloc(GLOCONT_BUFLEN, GFP_KERNEL); + if (!s_priv->glocont_buf) + goto err_glocont_buf; + + s_priv->ctrl_buf = kzalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); + if (!s_priv->ctrl_buf) + goto err_ctrl_buf; + + s_priv->device_details = d_details; + usb_set_serial_data(serial, s_priv); + + keyspan_setup_urbs(serial); + + if (s_priv->instat_urb != NULL) { + err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL); + if (err != 0) + dev_dbg(&serial->dev->dev, "%s - submit instat urb failed %d\n", __func__, err); + } + if (s_priv->indat_urb != NULL) { + err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL); + if (err != 0) + dev_dbg(&serial->dev->dev, "%s - submit indat urb failed %d\n", __func__, err); + } + + return 0; + +err_ctrl_buf: + kfree(s_priv->glocont_buf); +err_glocont_buf: + kfree(s_priv->indat_buf); +err_indat_buf: + kfree(s_priv->instat_buf); +err_instat_buf: + kfree(s_priv); + + return -ENOMEM; +} + +static void keyspan_disconnect(struct usb_serial *serial) +{ + struct keyspan_serial_private *s_priv; + + s_priv = usb_get_serial_data(serial); + + stop_urb(s_priv->instat_urb); + stop_urb(s_priv->glocont_urb); + stop_urb(s_priv->indat_urb); +} + +static void keyspan_release(struct usb_serial *serial) +{ + struct keyspan_serial_private *s_priv; + + s_priv = usb_get_serial_data(serial); + + usb_free_urb(s_priv->instat_urb); + usb_free_urb(s_priv->indat_urb); + usb_free_urb(s_priv->glocont_urb); + + kfree(s_priv->ctrl_buf); + kfree(s_priv->glocont_buf); + kfree(s_priv->indat_buf); + kfree(s_priv->instat_buf); + + kfree(s_priv); +} + +static int keyspan_port_probe(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct keyspan_serial_private *s_priv; + struct keyspan_port_private *p_priv; + const struct keyspan_device_details *d_details; + struct callbacks *cback; + int endp; + int port_num; + int i; + + s_priv = usb_get_serial_data(serial); + d_details = s_priv->device_details; + + p_priv = kzalloc(sizeof(*p_priv), GFP_KERNEL); + if (!p_priv) + return -ENOMEM; + + for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i) { + p_priv->in_buffer[i] = kzalloc(IN_BUFLEN, GFP_KERNEL); + if (!p_priv->in_buffer[i]) + goto err_in_buffer; + } + + for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i) { + p_priv->out_buffer[i] = kzalloc(OUT_BUFLEN, GFP_KERNEL); + if (!p_priv->out_buffer[i]) + goto err_out_buffer; + } + + p_priv->inack_buffer = kzalloc(INACK_BUFLEN, GFP_KERNEL); + if (!p_priv->inack_buffer) + goto err_inack_buffer; + + p_priv->outcont_buffer = kzalloc(OUTCONT_BUFLEN, GFP_KERNEL); + if (!p_priv->outcont_buffer) + goto err_outcont_buffer; + + p_priv->device_details = d_details; + + /* Setup values for the various callback routines */ + cback = &keyspan_callbacks[d_details->msg_format]; + + port_num = port->port_number; + + /* Do indat endpoints first, once for each flip */ + endp = d_details->indat_endpoints[port_num]; + for (i = 0; i <= d_details->indat_endp_flip; ++i, ++endp) { + p_priv->in_urbs[i] = keyspan_setup_urb(serial, endp, + USB_DIR_IN, port, + p_priv->in_buffer[i], + IN_BUFLEN, + cback->indat_callback); + } + /* outdat endpoints also have flip */ + endp = d_details->outdat_endpoints[port_num]; + for (i = 0; i <= d_details->outdat_endp_flip; ++i, ++endp) { + p_priv->out_urbs[i] = keyspan_setup_urb(serial, endp, + USB_DIR_OUT, port, + p_priv->out_buffer[i], + OUT_BUFLEN, + cback->outdat_callback); + } + /* inack endpoint */ + p_priv->inack_urb = keyspan_setup_urb(serial, + d_details->inack_endpoints[port_num], + USB_DIR_IN, port, + p_priv->inack_buffer, + INACK_BUFLEN, + cback->inack_callback); + /* outcont endpoint */ + p_priv->outcont_urb = keyspan_setup_urb(serial, + d_details->outcont_endpoints[port_num], + USB_DIR_OUT, port, + p_priv->outcont_buffer, + OUTCONT_BUFLEN, + cback->outcont_callback); + + usb_set_serial_port_data(port, p_priv); + + return 0; + +err_outcont_buffer: + kfree(p_priv->inack_buffer); +err_inack_buffer: + for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i) + kfree(p_priv->out_buffer[i]); +err_out_buffer: + for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i) + kfree(p_priv->in_buffer[i]); +err_in_buffer: + kfree(p_priv); + + return -ENOMEM; +} + +static int keyspan_port_remove(struct usb_serial_port *port) +{ + struct keyspan_port_private *p_priv; + int i; + + p_priv = usb_get_serial_port_data(port); + + stop_urb(p_priv->inack_urb); + stop_urb(p_priv->outcont_urb); + for (i = 0; i < 2; i++) { + stop_urb(p_priv->in_urbs[i]); + stop_urb(p_priv->out_urbs[i]); + } + + usb_free_urb(p_priv->inack_urb); + usb_free_urb(p_priv->outcont_urb); + for (i = 0; i < 2; i++) { + usb_free_urb(p_priv->in_urbs[i]); + usb_free_urb(p_priv->out_urbs[i]); + } + + kfree(p_priv->outcont_buffer); + kfree(p_priv->inack_buffer); + for (i = 0; i < ARRAY_SIZE(p_priv->out_buffer); ++i) + kfree(p_priv->out_buffer[i]); + for (i = 0; i < ARRAY_SIZE(p_priv->in_buffer); ++i) + kfree(p_priv->in_buffer[i]); + + kfree(p_priv); + + return 0; +} + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +MODULE_FIRMWARE("keyspan/usa28.fw"); +MODULE_FIRMWARE("keyspan/usa28x.fw"); +MODULE_FIRMWARE("keyspan/usa28xa.fw"); +MODULE_FIRMWARE("keyspan/usa28xb.fw"); +MODULE_FIRMWARE("keyspan/usa19.fw"); +MODULE_FIRMWARE("keyspan/usa19qi.fw"); +MODULE_FIRMWARE("keyspan/mpr.fw"); +MODULE_FIRMWARE("keyspan/usa19qw.fw"); +MODULE_FIRMWARE("keyspan/usa18x.fw"); +MODULE_FIRMWARE("keyspan/usa19w.fw"); +MODULE_FIRMWARE("keyspan/usa49w.fw"); +MODULE_FIRMWARE("keyspan/usa49wlc.fw"); diff --git a/kernel/drivers/usb/serial/keyspan.h b/kernel/drivers/usb/serial/keyspan.h new file mode 100644 index 000000000..0273dda30 --- /dev/null +++ b/kernel/drivers/usb/serial/keyspan.h @@ -0,0 +1,629 @@ +/* + Keyspan USB to Serial Converter driver + + (C) Copyright (C) 2000-2001 + Hugh Blemings <hugh@blemings.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + See http://blemings.org/hugh/keyspan.html for more information. + + Code in this driver inspired by and in a number of places taken + from Brian Warner's original Keyspan-PDA driver. + + This driver has been put together with the support of Innosys, Inc. + and Keyspan, Inc the manufacturers of the Keyspan USB-serial products. + Thanks Guys :) + + Thanks to Paulus for miscellaneous tidy ups, some largish chunks + of much nicer and/or completely new code and (perhaps most uniquely) + having the patience to sit down and explain why and where he'd changed + stuff. + + Tip 'o the hat to IBM (and previously Linuxcare :) for supporting + staff in their work on open source projects. + + See keyspan.c for update history. + +*/ + +#ifndef __LINUX_USB_SERIAL_KEYSPAN_H +#define __LINUX_USB_SERIAL_KEYSPAN_H + + +/* Function prototypes for Keyspan serial converter */ +static int keyspan_open (struct tty_struct *tty, + struct usb_serial_port *port); +static void keyspan_close (struct usb_serial_port *port); +static void keyspan_dtr_rts (struct usb_serial_port *port, int on); +static int keyspan_startup (struct usb_serial *serial); +static void keyspan_disconnect (struct usb_serial *serial); +static void keyspan_release (struct usb_serial *serial); +static int keyspan_port_probe(struct usb_serial_port *port); +static int keyspan_port_remove(struct usb_serial_port *port); +static int keyspan_write_room (struct tty_struct *tty); + +static int keyspan_write (struct tty_struct *tty, + struct usb_serial_port *port, + const unsigned char *buf, + int count); + +static void keyspan_send_setup (struct usb_serial_port *port, + int reset_port); + + +static void keyspan_set_termios (struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old); +static void keyspan_break_ctl (struct tty_struct *tty, + int break_state); +static int keyspan_tiocmget (struct tty_struct *tty); +static int keyspan_tiocmset (struct tty_struct *tty, + unsigned int set, + unsigned int clear); +static int keyspan_fake_startup (struct usb_serial *serial); + +static int keyspan_usa19_calc_baud (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, + u8 *rate_hi, u8 *rate_low, + u8 *prescaler, int portnum); + +static int keyspan_usa19w_calc_baud (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, + u8 *rate_hi, u8 *rate_low, + u8 *prescaler, int portnum); + +static int keyspan_usa28_calc_baud (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, + u8 *rate_hi, u8 *rate_low, + u8 *prescaler, int portnum); + +static int keyspan_usa19hs_calc_baud (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, + u8 *rate_hi, u8 *rate_low, + u8 *prescaler, int portnum); + +static int keyspan_usa28_send_setup (struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port); +static int keyspan_usa26_send_setup (struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port); +static int keyspan_usa49_send_setup (struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port); + +static int keyspan_usa90_send_setup (struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port); + +static int keyspan_usa67_send_setup (struct usb_serial *serial, + struct usb_serial_port *port, + int reset_port); + +/* Values used for baud rate calculation - device specific */ +#define KEYSPAN_INVALID_BAUD_RATE (-1) +#define KEYSPAN_BAUD_RATE_OK (0) +#define KEYSPAN_USA18X_BAUDCLK (12000000L) /* a guess */ +#define KEYSPAN_USA19_BAUDCLK (12000000L) +#define KEYSPAN_USA19W_BAUDCLK (24000000L) +#define KEYSPAN_USA19HS_BAUDCLK (14769231L) +#define KEYSPAN_USA28_BAUDCLK (1843200L) +#define KEYSPAN_USA28X_BAUDCLK (12000000L) +#define KEYSPAN_USA49W_BAUDCLK (48000000L) + +/* Some constants used to characterise each device. */ +#define KEYSPAN_MAX_NUM_PORTS (4) +#define KEYSPAN_MAX_FLIPS (2) + +/* Device info for the Keyspan serial converter, used + by the overall usb-serial probe function */ +#define KEYSPAN_VENDOR_ID (0x06cd) + +/* Product IDs for the products supported, pre-renumeration */ +#define keyspan_usa18x_pre_product_id 0x0105 +#define keyspan_usa19_pre_product_id 0x0103 +#define keyspan_usa19qi_pre_product_id 0x010b +#define keyspan_mpr_pre_product_id 0x011b +#define keyspan_usa19qw_pre_product_id 0x0118 +#define keyspan_usa19w_pre_product_id 0x0106 +#define keyspan_usa28_pre_product_id 0x0101 +#define keyspan_usa28x_pre_product_id 0x0102 +#define keyspan_usa28xa_pre_product_id 0x0114 +#define keyspan_usa28xb_pre_product_id 0x0113 +#define keyspan_usa49w_pre_product_id 0x0109 +#define keyspan_usa49wlc_pre_product_id 0x011a + +/* Product IDs post-renumeration. Note that the 28x and 28xb + have the same id's post-renumeration but behave identically + so it's not an issue. As such, the 28xb is not listed in any + of the device tables. */ +#define keyspan_usa18x_product_id 0x0112 +#define keyspan_usa19_product_id 0x0107 +#define keyspan_usa19qi_product_id 0x010c +#define keyspan_usa19hs_product_id 0x0121 +#define keyspan_mpr_product_id 0x011c +#define keyspan_usa19qw_product_id 0x0119 +#define keyspan_usa19w_product_id 0x0108 +#define keyspan_usa28_product_id 0x010f +#define keyspan_usa28x_product_id 0x0110 +#define keyspan_usa28xa_product_id 0x0115 +#define keyspan_usa28xb_product_id 0x0110 +#define keyspan_usa28xg_product_id 0x0135 +#define keyspan_usa49w_product_id 0x010a +#define keyspan_usa49wlc_product_id 0x012a +#define keyspan_usa49wg_product_id 0x0131 + +struct keyspan_device_details { + /* product ID value */ + int product_id; + + enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90, msg_usa67} msg_format; + + /* Number of physical ports */ + int num_ports; + + /* 1 if endpoint flipping used on input, 0 if not */ + int indat_endp_flip; + + /* 1 if endpoint flipping used on output, 0 if not */ + int outdat_endp_flip; + + /* Table mapping input data endpoint IDs to physical + port number and flip if used */ + int indat_endpoints[KEYSPAN_MAX_NUM_PORTS]; + + /* Same for output endpoints */ + int outdat_endpoints[KEYSPAN_MAX_NUM_PORTS]; + + /* Input acknowledge endpoints */ + int inack_endpoints[KEYSPAN_MAX_NUM_PORTS]; + + /* Output control endpoints */ + int outcont_endpoints[KEYSPAN_MAX_NUM_PORTS]; + + /* Endpoint used for input status */ + int instat_endpoint; + + /* Endpoint used for input data 49WG only */ + int indat_endpoint; + + /* Endpoint used for global control functions */ + int glocont_endpoint; + + int (*calculate_baud_rate) (struct usb_serial_port *port, + u32 baud_rate, u32 baudclk, + u8 *rate_hi, u8 *rate_low, u8 *prescaler, int portnum); + u32 baudclk; +}; + +/* Now for each device type we setup the device detail + structure with the appropriate information (provided + in Keyspan's documentation) */ + +static const struct keyspan_device_details usa18x_device_details = { + .product_id = keyspan_usa18x_product_id, + .msg_format = msg_usa26, + .num_ports = 1, + .indat_endp_flip = 0, + .outdat_endp_flip = 1, + .indat_endpoints = {0x81}, + .outdat_endpoints = {0x01}, + .inack_endpoints = {0x85}, + .outcont_endpoints = {0x05}, + .instat_endpoint = 0x87, + .indat_endpoint = -1, + .glocont_endpoint = 0x07, + .calculate_baud_rate = keyspan_usa19w_calc_baud, + .baudclk = KEYSPAN_USA18X_BAUDCLK, +}; + +static const struct keyspan_device_details usa19_device_details = { + .product_id = keyspan_usa19_product_id, + .msg_format = msg_usa28, + .num_ports = 1, + .indat_endp_flip = 1, + .outdat_endp_flip = 1, + .indat_endpoints = {0x81}, + .outdat_endpoints = {0x01}, + .inack_endpoints = {0x83}, + .outcont_endpoints = {0x03}, + .instat_endpoint = 0x84, + .indat_endpoint = -1, + .glocont_endpoint = -1, + .calculate_baud_rate = keyspan_usa19_calc_baud, + .baudclk = KEYSPAN_USA19_BAUDCLK, +}; + +static const struct keyspan_device_details usa19qi_device_details = { + .product_id = keyspan_usa19qi_product_id, + .msg_format = msg_usa28, + .num_ports = 1, + .indat_endp_flip = 1, + .outdat_endp_flip = 1, + .indat_endpoints = {0x81}, + .outdat_endpoints = {0x01}, + .inack_endpoints = {0x83}, + .outcont_endpoints = {0x03}, + .instat_endpoint = 0x84, + .indat_endpoint = -1, + .glocont_endpoint = -1, + .calculate_baud_rate = keyspan_usa28_calc_baud, + .baudclk = KEYSPAN_USA19_BAUDCLK, +}; + +static const struct keyspan_device_details mpr_device_details = { + .product_id = keyspan_mpr_product_id, + .msg_format = msg_usa28, + .num_ports = 1, + .indat_endp_flip = 1, + .outdat_endp_flip = 1, + .indat_endpoints = {0x81}, + .outdat_endpoints = {0x01}, + .inack_endpoints = {0x83}, + .outcont_endpoints = {0x03}, + .instat_endpoint = 0x84, + .indat_endpoint = -1, + .glocont_endpoint = -1, + .calculate_baud_rate = keyspan_usa28_calc_baud, + .baudclk = KEYSPAN_USA19_BAUDCLK, +}; + +static const struct keyspan_device_details usa19qw_device_details = { + .product_id = keyspan_usa19qw_product_id, + .msg_format = msg_usa26, + .num_ports = 1, + .indat_endp_flip = 0, + .outdat_endp_flip = 1, + .indat_endpoints = {0x81}, + .outdat_endpoints = {0x01}, + .inack_endpoints = {0x85}, + .outcont_endpoints = {0x05}, + .instat_endpoint = 0x87, + .indat_endpoint = -1, + .glocont_endpoint = 0x07, + .calculate_baud_rate = keyspan_usa19w_calc_baud, + .baudclk = KEYSPAN_USA19W_BAUDCLK, +}; + +static const struct keyspan_device_details usa19w_device_details = { + .product_id = keyspan_usa19w_product_id, + .msg_format = msg_usa26, + .num_ports = 1, + .indat_endp_flip = 0, + .outdat_endp_flip = 1, + .indat_endpoints = {0x81}, + .outdat_endpoints = {0x01}, + .inack_endpoints = {0x85}, + .outcont_endpoints = {0x05}, + .instat_endpoint = 0x87, + .indat_endpoint = -1, + .glocont_endpoint = 0x07, + .calculate_baud_rate = keyspan_usa19w_calc_baud, + .baudclk = KEYSPAN_USA19W_BAUDCLK, +}; + +static const struct keyspan_device_details usa19hs_device_details = { + .product_id = keyspan_usa19hs_product_id, + .msg_format = msg_usa90, + .num_ports = 1, + .indat_endp_flip = 0, + .outdat_endp_flip = 0, + .indat_endpoints = {0x81}, + .outdat_endpoints = {0x01}, + .inack_endpoints = {-1}, + .outcont_endpoints = {0x02}, + .instat_endpoint = 0x82, + .indat_endpoint = -1, + .glocont_endpoint = -1, + .calculate_baud_rate = keyspan_usa19hs_calc_baud, + .baudclk = KEYSPAN_USA19HS_BAUDCLK, +}; + +static const struct keyspan_device_details usa28_device_details = { + .product_id = keyspan_usa28_product_id, + .msg_format = msg_usa28, + .num_ports = 2, + .indat_endp_flip = 1, + .outdat_endp_flip = 1, + .indat_endpoints = {0x81, 0x83}, + .outdat_endpoints = {0x01, 0x03}, + .inack_endpoints = {0x85, 0x86}, + .outcont_endpoints = {0x05, 0x06}, + .instat_endpoint = 0x87, + .indat_endpoint = -1, + .glocont_endpoint = 0x07, + .calculate_baud_rate = keyspan_usa28_calc_baud, + .baudclk = KEYSPAN_USA28_BAUDCLK, +}; + +static const struct keyspan_device_details usa28x_device_details = { + .product_id = keyspan_usa28x_product_id, + .msg_format = msg_usa26, + .num_ports = 2, + .indat_endp_flip = 0, + .outdat_endp_flip = 1, + .indat_endpoints = {0x81, 0x83}, + .outdat_endpoints = {0x01, 0x03}, + .inack_endpoints = {0x85, 0x86}, + .outcont_endpoints = {0x05, 0x06}, + .instat_endpoint = 0x87, + .indat_endpoint = -1, + .glocont_endpoint = 0x07, + .calculate_baud_rate = keyspan_usa19w_calc_baud, + .baudclk = KEYSPAN_USA28X_BAUDCLK, +}; + +static const struct keyspan_device_details usa28xa_device_details = { + .product_id = keyspan_usa28xa_product_id, + .msg_format = msg_usa26, + .num_ports = 2, + .indat_endp_flip = 0, + .outdat_endp_flip = 1, + .indat_endpoints = {0x81, 0x83}, + .outdat_endpoints = {0x01, 0x03}, + .inack_endpoints = {0x85, 0x86}, + .outcont_endpoints = {0x05, 0x06}, + .instat_endpoint = 0x87, + .indat_endpoint = -1, + .glocont_endpoint = 0x07, + .calculate_baud_rate = keyspan_usa19w_calc_baud, + .baudclk = KEYSPAN_USA28X_BAUDCLK, +}; + +static const struct keyspan_device_details usa28xg_device_details = { + .product_id = keyspan_usa28xg_product_id, + .msg_format = msg_usa67, + .num_ports = 2, + .indat_endp_flip = 0, + .outdat_endp_flip = 0, + .indat_endpoints = {0x84, 0x88}, + .outdat_endpoints = {0x02, 0x06}, + .inack_endpoints = {-1, -1}, + .outcont_endpoints = {-1, -1}, + .instat_endpoint = 0x81, + .indat_endpoint = -1, + .glocont_endpoint = 0x01, + .calculate_baud_rate = keyspan_usa19w_calc_baud, + .baudclk = KEYSPAN_USA28X_BAUDCLK, +}; +/* We don't need a separate entry for the usa28xb as it appears as a 28x anyway */ + +static const struct keyspan_device_details usa49w_device_details = { + .product_id = keyspan_usa49w_product_id, + .msg_format = msg_usa49, + .num_ports = 4, + .indat_endp_flip = 0, + .outdat_endp_flip = 0, + .indat_endpoints = {0x81, 0x82, 0x83, 0x84}, + .outdat_endpoints = {0x01, 0x02, 0x03, 0x04}, + .inack_endpoints = {-1, -1, -1, -1}, + .outcont_endpoints = {-1, -1, -1, -1}, + .instat_endpoint = 0x87, + .indat_endpoint = -1, + .glocont_endpoint = 0x07, + .calculate_baud_rate = keyspan_usa19w_calc_baud, + .baudclk = KEYSPAN_USA49W_BAUDCLK, +}; + +static const struct keyspan_device_details usa49wlc_device_details = { + .product_id = keyspan_usa49wlc_product_id, + .msg_format = msg_usa49, + .num_ports = 4, + .indat_endp_flip = 0, + .outdat_endp_flip = 0, + .indat_endpoints = {0x81, 0x82, 0x83, 0x84}, + .outdat_endpoints = {0x01, 0x02, 0x03, 0x04}, + .inack_endpoints = {-1, -1, -1, -1}, + .outcont_endpoints = {-1, -1, -1, -1}, + .instat_endpoint = 0x87, + .indat_endpoint = -1, + .glocont_endpoint = 0x07, + .calculate_baud_rate = keyspan_usa19w_calc_baud, + .baudclk = KEYSPAN_USA19W_BAUDCLK, +}; + +static const struct keyspan_device_details usa49wg_device_details = { + .product_id = keyspan_usa49wg_product_id, + .msg_format = msg_usa49, + .num_ports = 4, + .indat_endp_flip = 0, + .outdat_endp_flip = 0, + .indat_endpoints = {-1, -1, -1, -1}, /* single 'global' data in EP */ + .outdat_endpoints = {0x01, 0x02, 0x04, 0x06}, + .inack_endpoints = {-1, -1, -1, -1}, + .outcont_endpoints = {-1, -1, -1, -1}, + .instat_endpoint = 0x81, + .indat_endpoint = 0x88, + .glocont_endpoint = 0x00, /* uses control EP */ + .calculate_baud_rate = keyspan_usa19w_calc_baud, + .baudclk = KEYSPAN_USA19W_BAUDCLK, +}; + +static const struct keyspan_device_details *keyspan_devices[] = { + &usa18x_device_details, + &usa19_device_details, + &usa19qi_device_details, + &mpr_device_details, + &usa19qw_device_details, + &usa19w_device_details, + &usa19hs_device_details, + &usa28_device_details, + &usa28x_device_details, + &usa28xa_device_details, + &usa28xg_device_details, + /* 28xb not required as it renumerates as a 28x */ + &usa49w_device_details, + &usa49wlc_device_details, + &usa49wg_device_details, + NULL, +}; + +static const struct usb_device_id keyspan_ids_combined[] = { + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)}, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)}, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, keyspan_ids_combined); + +/* usb_device_id table for the pre-firmware download keyspan devices */ +static const struct usb_device_id keyspan_pre_ids[] = { + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_pre_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_pre_product_id) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id keyspan_1port_ids[] = { + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa18x_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qi_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19qw_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19w_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa19hs_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_mpr_product_id) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id keyspan_2port_ids[] = { + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id keyspan_4port_ids[] = { + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) }, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)}, + { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)}, + { } /* Terminating entry */ +}; + +/* Structs for the devices, pre and post renumeration. */ +static struct usb_serial_driver keyspan_pre_device = { + .driver = { + .owner = THIS_MODULE, + .name = "keyspan_no_firm", + }, + .description = "Keyspan - (without firmware)", + .id_table = keyspan_pre_ids, + .num_ports = 1, + .attach = keyspan_fake_startup, +}; + +static struct usb_serial_driver keyspan_1port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "keyspan_1", + }, + .description = "Keyspan 1 port adapter", + .id_table = keyspan_1port_ids, + .num_ports = 1, + .open = keyspan_open, + .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, + .write = keyspan_write, + .write_room = keyspan_write_room, + .set_termios = keyspan_set_termios, + .break_ctl = keyspan_break_ctl, + .tiocmget = keyspan_tiocmget, + .tiocmset = keyspan_tiocmset, + .attach = keyspan_startup, + .disconnect = keyspan_disconnect, + .release = keyspan_release, + .port_probe = keyspan_port_probe, + .port_remove = keyspan_port_remove, +}; + +static struct usb_serial_driver keyspan_2port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "keyspan_2", + }, + .description = "Keyspan 2 port adapter", + .id_table = keyspan_2port_ids, + .num_ports = 2, + .open = keyspan_open, + .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, + .write = keyspan_write, + .write_room = keyspan_write_room, + .set_termios = keyspan_set_termios, + .break_ctl = keyspan_break_ctl, + .tiocmget = keyspan_tiocmget, + .tiocmset = keyspan_tiocmset, + .attach = keyspan_startup, + .disconnect = keyspan_disconnect, + .release = keyspan_release, + .port_probe = keyspan_port_probe, + .port_remove = keyspan_port_remove, +}; + +static struct usb_serial_driver keyspan_4port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "keyspan_4", + }, + .description = "Keyspan 4 port adapter", + .id_table = keyspan_4port_ids, + .num_ports = 4, + .open = keyspan_open, + .close = keyspan_close, + .dtr_rts = keyspan_dtr_rts, + .write = keyspan_write, + .write_room = keyspan_write_room, + .set_termios = keyspan_set_termios, + .break_ctl = keyspan_break_ctl, + .tiocmget = keyspan_tiocmget, + .tiocmset = keyspan_tiocmset, + .attach = keyspan_startup, + .disconnect = keyspan_disconnect, + .release = keyspan_release, + .port_probe = keyspan_port_probe, + .port_remove = keyspan_port_remove, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &keyspan_pre_device, &keyspan_1port_device, + &keyspan_2port_device, &keyspan_4port_device, NULL +}; + +#endif diff --git a/kernel/drivers/usb/serial/keyspan_pda.c b/kernel/drivers/usb/serial/keyspan_pda.c new file mode 100644 index 000000000..4f7e072e4 --- /dev/null +++ b/kernel/drivers/usb/serial/keyspan_pda.c @@ -0,0 +1,798 @@ +/* + * USB Keyspan PDA / Xircom / Entrega Converter driver + * + * Copyright (C) 1999 - 2001 Greg Kroah-Hartman <greg@kroah.com> + * Copyright (C) 1999, 2000 Brian Warner <warner@lothar.com> + * Copyright (C) 2000 Al Borchers <borchers@steinerpoint.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * See Documentation/usb/usb-serial.txt for more information on using this + * driver + */ + + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/workqueue.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/usb/ezusb.h> + +/* make a simple define to handle if we are compiling keyspan_pda or xircom support */ +#if defined(CONFIG_USB_SERIAL_KEYSPAN_PDA) || defined(CONFIG_USB_SERIAL_KEYSPAN_PDA_MODULE) + #define KEYSPAN +#else + #undef KEYSPAN +#endif +#if defined(CONFIG_USB_SERIAL_XIRCOM) || defined(CONFIG_USB_SERIAL_XIRCOM_MODULE) + #define XIRCOM +#else + #undef XIRCOM +#endif + +#define DRIVER_AUTHOR "Brian Warner <warner@lothar.com>" +#define DRIVER_DESC "USB Keyspan PDA Converter driver" + +struct keyspan_pda_private { + int tx_room; + int tx_throttled; + struct work_struct wakeup_work; + struct work_struct unthrottle_work; + struct usb_serial *serial; + struct usb_serial_port *port; +}; + + +#define KEYSPAN_VENDOR_ID 0x06cd +#define KEYSPAN_PDA_FAKE_ID 0x0103 +#define KEYSPAN_PDA_ID 0x0104 /* no clue */ + +/* For Xircom PGSDB9 and older Entrega version of the same device */ +#define XIRCOM_VENDOR_ID 0x085a +#define XIRCOM_FAKE_ID 0x8027 +#define XIRCOM_FAKE_ID_2 0x8025 /* "PGMFHUB" serial */ +#define ENTREGA_VENDOR_ID 0x1645 +#define ENTREGA_FAKE_ID 0x8093 + +static const struct usb_device_id id_table_combined[] = { +#ifdef KEYSPAN + { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) }, +#endif +#ifdef XIRCOM + { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) }, + { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID_2) }, + { USB_DEVICE(ENTREGA_VENDOR_ID, ENTREGA_FAKE_ID) }, +#endif + { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table_combined); + +static const struct usb_device_id id_table_std[] = { + { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_ID) }, + { } /* Terminating entry */ +}; + +#ifdef KEYSPAN +static const struct usb_device_id id_table_fake[] = { + { USB_DEVICE(KEYSPAN_VENDOR_ID, KEYSPAN_PDA_FAKE_ID) }, + { } /* Terminating entry */ +}; +#endif + +#ifdef XIRCOM +static const struct usb_device_id id_table_fake_xircom[] = { + { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) }, + { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID_2) }, + { USB_DEVICE(ENTREGA_VENDOR_ID, ENTREGA_FAKE_ID) }, + { } +}; +#endif + +static void keyspan_pda_wakeup_write(struct work_struct *work) +{ + struct keyspan_pda_private *priv = + container_of(work, struct keyspan_pda_private, wakeup_work); + struct usb_serial_port *port = priv->port; + + tty_port_tty_wakeup(&port->port); +} + +static void keyspan_pda_request_unthrottle(struct work_struct *work) +{ + struct keyspan_pda_private *priv = + container_of(work, struct keyspan_pda_private, unthrottle_work); + struct usb_serial *serial = priv->serial; + int result; + + /* ask the device to tell us when the tx buffer becomes + sufficiently empty */ + result = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), + 7, /* request_unthrottle */ + USB_TYPE_VENDOR | USB_RECIP_INTERFACE + | USB_DIR_OUT, + 16, /* value: threshold */ + 0, /* index */ + NULL, + 0, + 2000); + if (result < 0) + dev_dbg(&serial->dev->dev, "%s - error %d from usb_control_msg\n", + __func__, result); +} + + +static void keyspan_pda_rx_interrupt(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + int retval; + int status = urb->status; + struct keyspan_pda_private *priv; + priv = usb_get_serial_port_data(port); + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); + return; + default: + dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status); + goto exit; + } + + /* see if the message is data or a status interrupt */ + switch (data[0]) { + case 0: + /* rest of message is rx data */ + if (urb->actual_length) { + tty_insert_flip_string(&port->port, data + 1, + urb->actual_length - 1); + tty_flip_buffer_push(&port->port); + } + break; + case 1: + /* status interrupt */ + dev_dbg(&port->dev, "rx int, d1=%d, d2=%d\n", data[1], data[2]); + switch (data[1]) { + case 1: /* modemline change */ + break; + case 2: /* tx unthrottle interrupt */ + priv->tx_throttled = 0; + /* queue up a wakeup at scheduler time */ + schedule_work(&priv->wakeup_work); + break; + default: + break; + } + break; + default: + break; + } + +exit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + dev_err(&port->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, retval); +} + + +static void keyspan_pda_rx_throttle(struct tty_struct *tty) +{ + /* stop receiving characters. We just turn off the URB request, and + let chars pile up in the device. If we're doing hardware + flowcontrol, the device will signal the other end when its buffer + fills up. If we're doing XON/XOFF, this would be a good time to + send an XOFF, although it might make sense to foist that off + upon the device too. */ + struct usb_serial_port *port = tty->driver_data; + + usb_kill_urb(port->interrupt_in_urb); +} + + +static void keyspan_pda_rx_unthrottle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + /* just restart the receive interrupt URB */ + + if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL)) + dev_dbg(&port->dev, "usb_submit_urb(read urb) failed\n"); +} + + +static speed_t keyspan_pda_setbaud(struct usb_serial *serial, speed_t baud) +{ + int rc; + int bindex; + + switch (baud) { + case 110: + bindex = 0; + break; + case 300: + bindex = 1; + break; + case 1200: + bindex = 2; + break; + case 2400: + bindex = 3; + break; + case 4800: + bindex = 4; + break; + case 9600: + bindex = 5; + break; + case 19200: + bindex = 6; + break; + case 38400: + bindex = 7; + break; + case 57600: + bindex = 8; + break; + case 115200: + bindex = 9; + break; + default: + bindex = 5; /* Default to 9600 */ + baud = 9600; + } + + /* rather than figure out how to sleep while waiting for this + to complete, I just use the "legacy" API. */ + rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + 0, /* set baud */ + USB_TYPE_VENDOR + | USB_RECIP_INTERFACE + | USB_DIR_OUT, /* type */ + bindex, /* value */ + 0, /* index */ + NULL, /* &data */ + 0, /* size */ + 2000); /* timeout */ + if (rc < 0) + return 0; + return baud; +} + + +static void keyspan_pda_break_ctl(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + int value; + int result; + + if (break_state == -1) + value = 1; /* start break */ + else + value = 0; /* clear break */ + result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + 4, /* set break */ + USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT, + value, 0, NULL, 0, 2000); + if (result < 0) + dev_dbg(&port->dev, "%s - error %d from usb_control_msg\n", + __func__, result); + /* there is something funky about this.. the TCSBRK that 'cu' performs + ought to translate into a break_ctl(-1),break_ctl(0) pair HZ/4 + seconds apart, but it feels like the break sent isn't as long as it + is on /dev/ttyS0 */ +} + + +static void keyspan_pda_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + struct usb_serial *serial = port->serial; + speed_t speed; + + /* cflag specifies lots of stuff: number of stop bits, parity, number + of data bits, baud. What can the device actually handle?: + CSTOPB (1 stop bit or 2) + PARENB (parity) + CSIZE (5bit .. 8bit) + There is minimal hw support for parity (a PSW bit seems to hold the + parity of whatever is in the accumulator). The UART either deals + with 10 bits (start, 8 data, stop) or 11 bits (start, 8 data, + 1 special, stop). So, with firmware changes, we could do: + 8N1: 10 bit + 8N2: 11 bit, extra bit always (mark?) + 8[EOMS]1: 11 bit, extra bit is parity + 7[EOMS]1: 10 bit, b0/b7 is parity + 7[EOMS]2: 11 bit, b0/b7 is parity, extra bit always (mark?) + + HW flow control is dictated by the tty->termios.c_cflags & CRTSCTS + bit. + + For now, just do baud. */ + + speed = tty_get_baud_rate(tty); + speed = keyspan_pda_setbaud(serial, speed); + + if (speed == 0) { + dev_dbg(&port->dev, "can't handle requested baud rate\n"); + /* It hasn't changed so.. */ + speed = tty_termios_baud_rate(old_termios); + } + /* Only speed can change so copy the old h/w parameters + then encode the new speed */ + tty_termios_copy_hw(&tty->termios, old_termios); + tty_encode_baud_rate(tty, speed, speed); +} + + +/* modem control pins: DTR and RTS are outputs and can be controlled. + DCD, RI, DSR, CTS are inputs and can be read. All outputs can also be + read. The byte passed is: DTR(b7) DCD RI DSR CTS RTS(b2) unused unused */ + +static int keyspan_pda_get_modem_info(struct usb_serial *serial, + unsigned char *value) +{ + int rc; + u8 *data; + + data = kmalloc(1, GFP_KERNEL); + if (!data) + return -ENOMEM; + + rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + 3, /* get pins */ + USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_IN, + 0, 0, data, 1, 2000); + if (rc >= 0) + *value = *data; + + kfree(data); + return rc; +} + + +static int keyspan_pda_set_modem_info(struct usb_serial *serial, + unsigned char value) +{ + int rc; + rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + 3, /* set pins */ + USB_TYPE_VENDOR|USB_RECIP_INTERFACE|USB_DIR_OUT, + value, 0, NULL, 0, 2000); + return rc; +} + +static int keyspan_pda_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + int rc; + unsigned char status; + int value; + + rc = keyspan_pda_get_modem_info(serial, &status); + if (rc < 0) + return rc; + value = + ((status & (1<<7)) ? TIOCM_DTR : 0) | + ((status & (1<<6)) ? TIOCM_CAR : 0) | + ((status & (1<<5)) ? TIOCM_RNG : 0) | + ((status & (1<<4)) ? TIOCM_DSR : 0) | + ((status & (1<<3)) ? TIOCM_CTS : 0) | + ((status & (1<<2)) ? TIOCM_RTS : 0); + return value; +} + +static int keyspan_pda_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + int rc; + unsigned char status; + + rc = keyspan_pda_get_modem_info(serial, &status); + if (rc < 0) + return rc; + + if (set & TIOCM_RTS) + status |= (1<<2); + if (set & TIOCM_DTR) + status |= (1<<7); + + if (clear & TIOCM_RTS) + status &= ~(1<<2); + if (clear & TIOCM_DTR) + status &= ~(1<<7); + rc = keyspan_pda_set_modem_info(serial, status); + return rc; +} + +static int keyspan_pda_write(struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count) +{ + struct usb_serial *serial = port->serial; + int request_unthrottle = 0; + int rc = 0; + struct keyspan_pda_private *priv; + + priv = usb_get_serial_port_data(port); + /* guess how much room is left in the device's ring buffer, and if we + want to send more than that, check first, updating our notion of + what is left. If our write will result in no room left, ask the + device to give us an interrupt when the room available rises above + a threshold, and hold off all writers (eventually, those using + select() or poll() too) until we receive that unthrottle interrupt. + Block if we can't write anything at all, otherwise write as much as + we can. */ + if (count == 0) { + dev_dbg(&port->dev, "write request of 0 bytes\n"); + return 0; + } + + /* we might block because of: + the TX urb is in-flight (wait until it completes) + the device is full (wait until it says there is room) + */ + spin_lock_bh(&port->lock); + if (!test_bit(0, &port->write_urbs_free) || priv->tx_throttled) { + spin_unlock_bh(&port->lock); + return 0; + } + clear_bit(0, &port->write_urbs_free); + spin_unlock_bh(&port->lock); + + /* At this point the URB is in our control, nobody else can submit it + again (the only sudden transition was the one from EINPROGRESS to + finished). Also, the tx process is not throttled. So we are + ready to write. */ + + count = (count > port->bulk_out_size) ? port->bulk_out_size : count; + + /* Check if we might overrun the Tx buffer. If so, ask the + device how much room it really has. This is done only on + scheduler time, since usb_control_msg() sleeps. */ + if (count > priv->tx_room && !in_interrupt()) { + u8 *room; + + room = kmalloc(1, GFP_KERNEL); + if (!room) { + rc = -ENOMEM; + goto exit; + } + + rc = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + 6, /* write_room */ + USB_TYPE_VENDOR | USB_RECIP_INTERFACE + | USB_DIR_IN, + 0, /* value: 0 means "remaining room" */ + 0, /* index */ + room, + 1, + 2000); + if (rc > 0) { + dev_dbg(&port->dev, "roomquery says %d\n", *room); + priv->tx_room = *room; + } + kfree(room); + if (rc < 0) { + dev_dbg(&port->dev, "roomquery failed\n"); + goto exit; + } + if (rc == 0) { + dev_dbg(&port->dev, "roomquery returned 0 bytes\n"); + rc = -EIO; /* device didn't return any data */ + goto exit; + } + } + if (count > priv->tx_room) { + /* we're about to completely fill the Tx buffer, so + we'll be throttled afterwards. */ + count = priv->tx_room; + request_unthrottle = 1; + } + + if (count) { + /* now transfer data */ + memcpy(port->write_urb->transfer_buffer, buf, count); + /* send the data out the bulk port */ + port->write_urb->transfer_buffer_length = count; + + priv->tx_room -= count; + + rc = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (rc) { + dev_dbg(&port->dev, "usb_submit_urb(write bulk) failed\n"); + goto exit; + } + } else { + /* There wasn't any room left, so we are throttled until + the buffer empties a bit */ + request_unthrottle = 1; + } + + if (request_unthrottle) { + priv->tx_throttled = 1; /* block writers */ + schedule_work(&priv->unthrottle_work); + } + + rc = count; +exit: + if (rc < 0) + set_bit(0, &port->write_urbs_free); + return rc; +} + + +static void keyspan_pda_write_bulk_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct keyspan_pda_private *priv; + + set_bit(0, &port->write_urbs_free); + priv = usb_get_serial_port_data(port); + + /* queue up a wakeup at scheduler time */ + schedule_work(&priv->wakeup_work); +} + + +static int keyspan_pda_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct keyspan_pda_private *priv; + priv = usb_get_serial_port_data(port); + /* used by n_tty.c for processing of tabs and such. Giving it our + conservative guess is probably good enough, but needs testing by + running a console through the device. */ + return priv->tx_room; +} + + +static int keyspan_pda_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct keyspan_pda_private *priv; + unsigned long flags; + int ret = 0; + + priv = usb_get_serial_port_data(port); + + /* when throttled, return at least WAKEUP_CHARS to tell select() (via + n_tty.c:normal_poll() ) that we're not writeable. */ + + spin_lock_irqsave(&port->lock, flags); + if (!test_bit(0, &port->write_urbs_free) || priv->tx_throttled) + ret = 256; + spin_unlock_irqrestore(&port->lock, flags); + return ret; +} + + +static void keyspan_pda_dtr_rts(struct usb_serial_port *port, int on) +{ + struct usb_serial *serial = port->serial; + + if (on) + keyspan_pda_set_modem_info(serial, (1 << 7) | (1 << 2)); + else + keyspan_pda_set_modem_info(serial, 0); +} + + +static int keyspan_pda_open(struct tty_struct *tty, + struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + u8 *room; + int rc = 0; + struct keyspan_pda_private *priv; + + /* find out how much room is in the Tx ring */ + room = kmalloc(1, GFP_KERNEL); + if (!room) + return -ENOMEM; + + rc = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + 6, /* write_room */ + USB_TYPE_VENDOR | USB_RECIP_INTERFACE + | USB_DIR_IN, + 0, /* value */ + 0, /* index */ + room, + 1, + 2000); + if (rc < 0) { + dev_dbg(&port->dev, "%s - roomquery failed\n", __func__); + goto error; + } + if (rc == 0) { + dev_dbg(&port->dev, "%s - roomquery returned 0 bytes\n", __func__); + rc = -EIO; + goto error; + } + priv = usb_get_serial_port_data(port); + priv->tx_room = *room; + priv->tx_throttled = *room ? 0 : 1; + + /*Start reading from the device*/ + rc = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (rc) { + dev_dbg(&port->dev, "%s - usb_submit_urb(read int) failed\n", __func__); + goto error; + } +error: + kfree(room); + return rc; +} +static void keyspan_pda_close(struct usb_serial_port *port) +{ + usb_kill_urb(port->write_urb); + usb_kill_urb(port->interrupt_in_urb); +} + + +/* download the firmware to a "fake" device (pre-renumeration) */ +static int keyspan_pda_fake_startup(struct usb_serial *serial) +{ + int response; + const char *fw_name; + + /* download the firmware here ... */ + response = ezusb_fx1_set_reset(serial->dev, 1); + + if (0) { ; } +#ifdef KEYSPAN + else if (le16_to_cpu(serial->dev->descriptor.idVendor) == KEYSPAN_VENDOR_ID) + fw_name = "keyspan_pda/keyspan_pda.fw"; +#endif +#ifdef XIRCOM + else if ((le16_to_cpu(serial->dev->descriptor.idVendor) == XIRCOM_VENDOR_ID) || + (le16_to_cpu(serial->dev->descriptor.idVendor) == ENTREGA_VENDOR_ID)) + fw_name = "keyspan_pda/xircom_pgs.fw"; +#endif + else { + dev_err(&serial->dev->dev, "%s: unknown vendor, aborting.\n", + __func__); + return -ENODEV; + } + + if (ezusb_fx1_ihex_firmware_download(serial->dev, fw_name) < 0) { + dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n", + fw_name); + return -ENOENT; + } + + /* after downloading firmware Renumeration will occur in a + moment and the new device will bind to the real driver */ + + /* we want this device to fail to have a driver assigned to it. */ + return 1; +} + +#ifdef KEYSPAN +MODULE_FIRMWARE("keyspan_pda/keyspan_pda.fw"); +#endif +#ifdef XIRCOM +MODULE_FIRMWARE("keyspan_pda/xircom_pgs.fw"); +#endif + +static int keyspan_pda_port_probe(struct usb_serial_port *port) +{ + + struct keyspan_pda_private *priv; + + priv = kmalloc(sizeof(struct keyspan_pda_private), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + INIT_WORK(&priv->wakeup_work, keyspan_pda_wakeup_write); + INIT_WORK(&priv->unthrottle_work, keyspan_pda_request_unthrottle); + priv->serial = port->serial; + priv->port = port; + + usb_set_serial_port_data(port, priv); + + return 0; +} + +static int keyspan_pda_port_remove(struct usb_serial_port *port) +{ + struct keyspan_pda_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} + +#ifdef KEYSPAN +static struct usb_serial_driver keyspan_pda_fake_device = { + .driver = { + .owner = THIS_MODULE, + .name = "keyspan_pda_pre", + }, + .description = "Keyspan PDA - (prerenumeration)", + .id_table = id_table_fake, + .num_ports = 1, + .attach = keyspan_pda_fake_startup, +}; +#endif + +#ifdef XIRCOM +static struct usb_serial_driver xircom_pgs_fake_device = { + .driver = { + .owner = THIS_MODULE, + .name = "xircom_no_firm", + }, + .description = "Xircom / Entrega PGS - (prerenumeration)", + .id_table = id_table_fake_xircom, + .num_ports = 1, + .attach = keyspan_pda_fake_startup, +}; +#endif + +static struct usb_serial_driver keyspan_pda_device = { + .driver = { + .owner = THIS_MODULE, + .name = "keyspan_pda", + }, + .description = "Keyspan PDA", + .id_table = id_table_std, + .num_ports = 1, + .dtr_rts = keyspan_pda_dtr_rts, + .open = keyspan_pda_open, + .close = keyspan_pda_close, + .write = keyspan_pda_write, + .write_room = keyspan_pda_write_room, + .write_bulk_callback = keyspan_pda_write_bulk_callback, + .read_int_callback = keyspan_pda_rx_interrupt, + .chars_in_buffer = keyspan_pda_chars_in_buffer, + .throttle = keyspan_pda_rx_throttle, + .unthrottle = keyspan_pda_rx_unthrottle, + .set_termios = keyspan_pda_set_termios, + .break_ctl = keyspan_pda_break_ctl, + .tiocmget = keyspan_pda_tiocmget, + .tiocmset = keyspan_pda_tiocmset, + .port_probe = keyspan_pda_port_probe, + .port_remove = keyspan_pda_port_remove, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &keyspan_pda_device, +#ifdef KEYSPAN + &keyspan_pda_fake_device, +#endif +#ifdef XIRCOM + &xircom_pgs_fake_device, +#endif + NULL +}; + +module_usb_serial_driver(serial_drivers, id_table_combined); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/keyspan_usa26msg.h b/kernel/drivers/usb/serial/keyspan_usa26msg.h new file mode 100644 index 000000000..09e21e84f --- /dev/null +++ b/kernel/drivers/usb/serial/keyspan_usa26msg.h @@ -0,0 +1,260 @@ +/* + usa26msg.h + + Copyright (C) 1998-2000 InnoSys Incorporated. All Rights Reserved + This file is available under a BSD-style copyright + + Keyspan USB Async Message Formats for the USA28X + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are + met: + + 1. Redistributions of source code must retain this licence text + without modification, this list of conditions, and the following + disclaimer. The following copyright notice must appear immediately at + the beginning of all source files: + + Copyright (C) 1998-2000 InnoSys Incorporated. All Rights Reserved + + This file is available under a BSD-style copyright + + 2. The name of InnoSys Incorporated may not be used to endorse or promote + products derived from this software without specific prior written + permission. + + THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, + INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + SUCH DAMAGE. + + Third revision: USA28X version (aka USA26) + + Buffer formats for RX/TX data messages are not defined by + a structure, but are described here: + + USB OUT (host -> USAxx, transmit) messages contain a + REQUEST_ACK indicator (set to 0xff to request an ACK at the + completion of transmit; 0x00 otherwise), followed by data: + + RQSTACK DAT DAT DAT ... + + with a total data length of 63. + + USB IN (USAxx -> host, receive) messages begin with a status + byte in which the 0x80 bit is either: + + (a) 0x80 bit clear + indicates that the bytes following it are all data + bytes: + + STAT DATA DATA DATA DATA DATA ... + + for a total of up to 63 DATA bytes, + + or: + + (b) 0x80 bit set + indicates that the bytes following alternate data and + status bytes: + + STAT DATA STAT DATA STAT DATA STAT DATA ... + + for a total of up to 32 DATA bytes. + + The valid bits in the STAT bytes are: + + OVERRUN 0x02 + PARITY 0x04 + FRAMING 0x08 + BREAK 0x10 + + Notes: + + (1) The OVERRUN bit can appear in either (a) or (b) format + messages, but the but the PARITY/FRAMING/BREAK bits + only appear in (b) format messages. + (2) For the host to determine the exact point at which the + overrun occurred (to identify the point in the data + stream at which the data was lost), it needs to count + 128 characters, starting at the first character of the + message in which OVERRUN was reported; the lost character(s) + would have been received between the 128th and 129th + characters. + (3) An RX data message in which the first byte has 0x80 clear + serves as a "break off" indicator. + + revision history: + + 1999feb10 add reportHskiaChanges to allow us to ignore them + 1999feb10 add txAckThreshold for fast+loose throughput enhancement + 1999mar30 beef up support for RX error reporting + 1999apr14 add resetDataToggle to control message + 2000jan04 merge with usa17msg.h + 2000jun01 add extended BSD-style copyright text + 2001jul05 change message format to improve OVERRUN case + + Note on shared names: + + In the case of fields which have been merged between the USA17 + and USA26 definitions, the USA26 definition is the first part + of the name and the USA17 definition is the second part of the + name; both meanings are described below. +*/ + +#ifndef __USA26MSG__ +#define __USA26MSG__ + + +struct keyspan_usa26_portControlMessage +{ + /* + there are three types of "commands" sent in the control message: + + 1. configuration changes which must be requested by setting + the corresponding "set" flag (and should only be requested + when necessary, to reduce overhead on the USA26): + */ + u8 setClocking, // BOTH: host requests baud rate be set + baudLo, // BOTH: host does baud divisor calculation + baudHi, // BOTH: baudHi is only used for first port (gives lower rates) + externalClock_txClocking, + // USA26: 0=internal, other=external + // USA17: 0=internal, other=external/RI + rxClocking, // USA17: 0=internal, 1=external/RI, other=external/DSR + + + setLcr, // BOTH: host requests lcr be set + lcr, // BOTH: use PARITY, STOPBITS, DATABITS below + + setFlowControl, // BOTH: host requests flow control be set + ctsFlowControl, // BOTH: 1=use CTS flow control, 0=don't + xonFlowControl, // BOTH: 1=use XON/XOFF flow control, 0=don't + xonChar, // BOTH: specified in current character format + xoffChar, // BOTH: specified in current character format + + setTxTriState_setRts, + // USA26: host requests TX tri-state be set + // USA17: host requests RTS output be set + txTriState_rts, // BOTH: 1=active (normal), 0=tristate (off) + + setHskoa_setDtr, + // USA26: host requests HSKOA output be set + // USA17: host requests DTR output be set + hskoa_dtr, // BOTH: 1=on, 0=off + + setPrescaler, // USA26: host requests prescalar be set (default: 13) + prescaler; // BOTH: specified as N/8; values 8-ff are valid + // must be set any time internal baud rate is set; + // must not be set when external clocking is used + // note: in USA17, prescaler is applied whenever + // setClocking is requested + + /* + 3. configuration data which is simply used as is (no overhead, + but must be specified correctly in every host message). + */ + u8 forwardingLength, // BOTH: forward when this number of chars available + reportHskiaChanges_dsrFlowControl, + // USA26: 1=normal; 0=ignore external clock + // USA17: 1=use DSR flow control, 0=don't + txAckThreshold, // BOTH: 0=not allowed, 1=normal, 2-255 deliver ACK faster + loopbackMode; // BOTH: 0=no loopback, 1=loopback enabled + + /* + 4. commands which are flags only; these are processed in order + (so that, e.g., if both _txOn and _txOff flags are set, the + port ends in a TX_OFF state); any non-zero value is respected + */ + u8 _txOn, // BOTH: enable transmitting (and continue if there's data) + _txOff, // BOTH: stop transmitting + txFlush, // BOTH: toss outbound data + txBreak, // BOTH: turn on break (cleared by _txOn) + rxOn, // BOTH: turn on receiver + rxOff, // BOTH: turn off receiver + rxFlush, // BOTH: toss inbound data + rxForward, // BOTH: forward all inbound data, NOW (as if fwdLen==1) + returnStatus, // BOTH: return current status (even if it hasn't changed) + resetDataToggle;// BOTH: reset data toggle state to DATA0 + +}; + +// defines for bits in lcr +#define USA_DATABITS_5 0x00 +#define USA_DATABITS_6 0x01 +#define USA_DATABITS_7 0x02 +#define USA_DATABITS_8 0x03 +#define STOPBITS_5678_1 0x00 // 1 stop bit for all byte sizes +#define STOPBITS_5_1p5 0x04 // 1.5 stop bits for 5-bit byte +#define STOPBITS_678_2 0x04 // 2 stop bits for 6/7/8-bit byte +#define USA_PARITY_NONE 0x00 +#define USA_PARITY_ODD 0x08 +#define USA_PARITY_EVEN 0x18 +#define PARITY_1 0x28 +#define PARITY_0 0x38 + +// all things called "StatusMessage" are sent on the status endpoint + +struct keyspan_usa26_portStatusMessage // one for each port +{ + u8 port, // BOTH: 0=first, 1=second, other=see below + hskia_cts, // USA26: reports HSKIA pin + // USA17: reports CTS pin + gpia_dcd, // USA26: reports GPIA pin + // USA17: reports DCD pin + dsr, // USA17: reports DSR pin + ri, // USA17: reports RI pin + _txOff, // port has been disabled (by host) + _txXoff, // port is in XOFF state (either host or RX XOFF) + rxEnabled, // as configured by rxOn/rxOff 1=on, 0=off + controlResponse;// 1=a control message has been processed +}; + +// bits in RX data message when STAT byte is included +#define RXERROR_OVERRUN 0x02 +#define RXERROR_PARITY 0x04 +#define RXERROR_FRAMING 0x08 +#define RXERROR_BREAK 0x10 + +struct keyspan_usa26_globalControlMessage +{ + u8 sendGlobalStatus, // 2=request for two status responses + resetStatusToggle, // 1=reset global status toggle + resetStatusCount; // a cycling value +}; + +struct keyspan_usa26_globalStatusMessage +{ + u8 port, // 3 + sendGlobalStatus, // from request, decremented + resetStatusCount; // as in request +}; + +struct keyspan_usa26_globalDebugMessage +{ + u8 port, // 2 + a, + b, + c, + d; +}; + +// ie: the maximum length of an EZUSB endpoint buffer +#define MAX_DATA_LEN 64 + +// update status approx. 60 times a second (16.6666 ms) +#define STATUS_UPDATE_INTERVAL 16 + +// status rationing tuning value (each port gets checked each n ms) +#define STATUS_RATION 10 + +#endif + + diff --git a/kernel/drivers/usb/serial/keyspan_usa28msg.h b/kernel/drivers/usb/serial/keyspan_usa28msg.h new file mode 100644 index 000000000..dee454c46 --- /dev/null +++ b/kernel/drivers/usb/serial/keyspan_usa28msg.h @@ -0,0 +1,201 @@ +/* + usa28msg.h + + Copyright (C) 1998-2000 InnoSys Incorporated. All Rights Reserved + This file is available under a BSD-style copyright + + Keyspan USB Async Message Formats for the USA26X + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are + met: + + 1. Redistributions of source code must retain this licence text + without modification, this list of conditions, and the following + disclaimer. The following copyright notice must appear immediately at + the beginning of all source files: + + Copyright (C) 1998-2000 InnoSys Incorporated. All Rights Reserved + + This file is available under a BSD-style copyright + + 2. The name of InnoSys Incorporated may not be used to endorse or promote + products derived from this software without specific prior written + permission. + + THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, + INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + SUCH DAMAGE. + + Note: these message formats are common to USA18, USA19, and USA28; + (for USA28X, see usa26msg.h) + + Buffer formats for RX/TX data messages are not defined by + a structure, but are described here: + + USB OUT (host -> USA28, transmit) messages contain a + REQUEST_ACK indicator (set to 0xff to request an ACK at the + completion of transmit; 0x00 otherwise), followed by data. + If the port is configured for parity, the data will be an + alternating string of parity and data bytes, so the message + format will be: + + RQSTACK PAR DAT PAR DAT ... + + so the maximum length is 63 bytes (1 + 62, or 31 data bytes); + always an odd number for the total message length. + + If there is no parity, the format is simply: + + RQSTACK DAT DAT DAT ... + + with a total data length of 63. + + USB IN (USA28 -> host, receive) messages contain data and parity + if parity is configred, thusly: + + DAT PAR DAT PAR DAT PAR ... + + for a total of 32 data bytes; + + If parity is not configured, the format is: + + DAT DAT DAT ... + + for a total of 64 data bytes. + + In the TX messages (USB OUT), the 0x01 bit of the PARity byte is + the parity bit. In the RX messages (USB IN), the PARity byte is + the content of the 8051's status register; the parity bit + (RX_PARITY_BIT) is the 0x04 bit. + + revision history: + + 1999may06 add resetDataToggle to control message + 2000mar21 add rs232invalid to status response message + 2000apr04 add 230.4Kb definition to setBaudRate + 2000apr13 add/remove loopbackMode switch + 2000apr13 change definition of setBaudRate to cover 115.2Kb, too + 2000jun01 add extended BSD-style copyright text +*/ + +#ifndef __USA28MSG__ +#define __USA28MSG__ + + +struct keyspan_usa28_portControlMessage +{ + /* + there are four types of "commands" sent in the control message: + + 1. configuration changes which must be requested by setting + the corresponding "set" flag (and should only be requested + when necessary, to reduce overhead on the USA28): + */ + u8 setBaudRate, // 0=don't set, 1=baudLo/Hi, 2=115.2K, 3=230.4K + baudLo, // host does baud divisor calculation + baudHi; // baudHi is only used for first port (gives lower rates) + + /* + 2. configuration changes which are done every time (because it's + hardly more trouble to do them than to check whether to do them): + */ + u8 parity, // 1=use parity, 0=don't + ctsFlowControl, // all except 19Q: 1=use CTS flow control, 0=don't + // 19Q: 0x08:CTSflowControl 0x10:DSRflowControl + xonFlowControl, // 1=use XON/XOFF flow control, 0=don't + rts, // 1=on, 0=off + dtr; // 1=on, 0=off + + /* + 3. configuration data which is simply used as is (no overhead, + but must be correct in every host message). + */ + u8 forwardingLength, // forward when this number of chars available + forwardMs, // forward this many ms after last rx data + breakThreshold, // specified in ms, 1-255 (see note below) + xonChar, // specified in current character format + xoffChar; // specified in current character format + + /* + 4. commands which are flags only; these are processed in order + (so that, e.g., if both _txOn and _txOff flags are set, the + port ends in a TX_OFF state); any non-zero value is respected + */ + u8 _txOn, // enable transmitting (and continue if there's data) + _txOff, // stop transmitting + txFlush, // toss outbound data + txForceXoff, // pretend we've received XOFF + txBreak, // turn on break (leave on until txOn clears it) + rxOn, // turn on receiver + rxOff, // turn off receiver + rxFlush, // toss inbound data + rxForward, // forward all inbound data, NOW + returnStatus, // return current status n times (1 or 2) + resetDataToggle;// reset data toggle state to DATA0 + +}; + +struct keyspan_usa28_portStatusMessage +{ + u8 port, // 0=first, 1=second, 2=global (see below) + cts, + dsr, // (not used in all products) + dcd, + + ri, // (not used in all products) + _txOff, // port has been disabled (by host) + _txXoff, // port is in XOFF state (either host or RX XOFF) + dataLost, // count of lost chars; wraps; not guaranteed exact + + rxEnabled, // as configured by rxOn/rxOff 1=on, 0=off + rxBreak, // 1=we're in break state + rs232invalid, // 1=no valid signals on rs-232 inputs + controlResponse;// 1=a control messages has been processed +}; + +// bit defines in txState +#define TX_OFF 0x01 // requested by host txOff command +#define TX_XOFF 0x02 // either real, or simulated by host + +struct keyspan_usa28_globalControlMessage +{ + u8 sendGlobalStatus, // 2=request for two status responses + resetStatusToggle, // 1=reset global status toggle + resetStatusCount; // a cycling value +}; + +struct keyspan_usa28_globalStatusMessage +{ + u8 port, // 3 + sendGlobalStatus, // from request, decremented + resetStatusCount; // as in request +}; + +struct keyspan_usa28_globalDebugMessage +{ + u8 port, // 2 + n, // typically a count/status byte + b; // typically a data byte +}; + +// ie: the maximum length of an EZUSB endpoint buffer +#define MAX_DATA_LEN 64 + +// the parity bytes have only one significant bit +#define RX_PARITY_BIT 0x04 +#define TX_PARITY_BIT 0x01 + +// update status approx. 60 times a second (16.6666 ms) +#define STATUS_UPDATE_INTERVAL 16 + +#endif + diff --git a/kernel/drivers/usb/serial/keyspan_usa49msg.h b/kernel/drivers/usb/serial/keyspan_usa49msg.h new file mode 100644 index 000000000..163b2dea2 --- /dev/null +++ b/kernel/drivers/usb/serial/keyspan_usa49msg.h @@ -0,0 +1,282 @@ +/* + usa49msg.h + + Copyright (C) 1998-2000 InnoSys Incorporated. All Rights Reserved + This file is available under a BSD-style copyright + + Keyspan USB Async Message Formats for the USA49W + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are + met: + + 1. Redistributions of source code must retain this licence text + without modification, this list of conditions, and the following + disclaimer. The following copyright notice must appear immediately at + the beginning of all source files: + + Copyright (C) 1998-2000 InnoSys Incorporated. All Rights Reserved + + This file is available under a BSD-style copyright + + 2. The name of InnoSys Incorporated may not be used to endorse or promote + products derived from this software without specific prior written + permission. + + THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, + INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + SUCH DAMAGE. + + 4th revision: USA49W version + + Buffer formats for RX/TX data messages are not defined by + a structure, but are described here: + + USB OUT (host -> USAxx, transmit) messages contain a + REQUEST_ACK indicator (set to 0xff to request an ACK at the + completion of transmit; 0x00 otherwise), followed by data: + + RQSTACK DAT DAT DAT ... + + with a total data length of 63. + + USB IN (USAxx -> host, receive) messages begin with a status + byte in which the 0x80 bit is either: + + (a) 0x80 bit clear + indicates that the bytes following it are all data + bytes: + + STAT DATA DATA DATA DATA DATA ... + + for a total of up to 63 DATA bytes, + + or: + + (b) 0x80 bit set + indiates that the bytes following alternate data and + status bytes: + + STAT DATA STAT DATA STAT DATA STAT DATA ... + + for a total of up to 32 DATA bytes. + + The valid bits in the STAT bytes are: + + OVERRUN 0x02 + PARITY 0x04 + FRAMING 0x08 + BREAK 0x10 + + Notes: + + (1) The OVERRUN bit can appear in either (a) or (b) format + messages, but the but the PARITY/FRAMING/BREAK bits + only appear in (b) format messages. + (2) For the host to determine the exact point at which the + overrun occurred (to identify the point in the data + stream at which the data was lost), it needs to count + 128 characters, starting at the first character of the + message in which OVERRUN was reported; the lost character(s) + would have been received between the 128th and 129th + characters. + (3) An RX data message in which the first byte has 0x80 clear + serves as a "break off" indicator. + (4) a control message specifying disablePort will be answered + with a status message, but no further status will be sent + until a control messages with enablePort is sent + + revision history: + + 1999feb10 add reportHskiaChanges to allow us to ignore them + 1999feb10 add txAckThreshold for fast+loose throughput enhancement + 1999mar30 beef up support for RX error reporting + 1999apr14 add resetDataToggle to control message + 2000jan04 merge with usa17msg.h + 2000mar08 clone from usa26msg.h -> usa49msg.h + 2000mar09 change to support 4 ports + 2000may03 change external clocking to match USA-49W hardware + 2000jun01 add extended BSD-style copyright text + 2001jul05 change message format to improve OVERRUN case +*/ + +#ifndef __USA49MSG__ +#define __USA49MSG__ + + +/* + Host->device messages sent on the global control endpoint: + + portNumber message + ---------- -------------------- + 0,1,2,3 portControlMessage + 0x80 globalControlMessage +*/ + +struct keyspan_usa49_portControlMessage +{ + /* + 0. 0/1/2/3 port control message follows + 0x80 set non-port control message follows + */ + u8 portNumber, + + /* + there are three types of "commands" sent in the control message: + + 1. configuration changes which must be requested by setting + the corresponding "set" flag (and should only be requested + when necessary, to reduce overhead on the USA26): + */ + setClocking, // host requests baud rate be set + baudLo, // host does baud divisor calculation + baudHi, // baudHi is only used for first port (gives lower rates) + prescaler, // specified as N/8; values 8-ff are valid + // must be set any time internal baud rate is set; + txClocking, // 0=internal, 1=external/DSR + rxClocking, // 0=internal, 1=external/DSR + + setLcr, // host requests lcr be set + lcr, // use PARITY, STOPBITS, DATABITS below + + setFlowControl, // host requests flow control be set + ctsFlowControl, // 1=use CTS flow control, 0=don't + xonFlowControl, // 1=use XON/XOFF flow control, 0=don't + xonChar, // specified in current character format + xoffChar, // specified in current character format + + setRts, // host requests RTS output be set + rts, // 1=active, 0=inactive + + setDtr, // host requests DTR output be set + dtr; // 1=on, 0=off + + + /* + 3. configuration data which is simply used as is (no overhead, + but must be specified correctly in every host message). + */ + u8 forwardingLength, // forward when this number of chars available + dsrFlowControl, // 1=use DSR flow control, 0=don't + txAckThreshold, // 0=not allowed, 1=normal, 2-255 deliver ACK faster + loopbackMode; // 0=no loopback, 1=loopback enabled + + /* + 4. commands which are flags only; these are processed in order + (so that, e.g., if both _txOn and _txOff flags are set, the + port ends in a TX_OFF state); any non-zero value is respected + */ + u8 _txOn, // enable transmitting (and continue if there's data) + _txOff, // stop transmitting + txFlush, // toss outbound data + txBreak, // turn on break (cleared by _txOn) + rxOn, // turn on receiver + rxOff, // turn off receiver + rxFlush, // toss inbound data + rxForward, // forward all inbound data, NOW (as if fwdLen==1) + returnStatus, // return current status (even if it hasn't changed) + resetDataToggle,// reset data toggle state to DATA0 + enablePort, // start servicing port (move data, check status) + disablePort; // stop servicing port (does implicit tx/rx flush/off) + +}; + +// defines for bits in lcr +#define USA_DATABITS_5 0x00 +#define USA_DATABITS_6 0x01 +#define USA_DATABITS_7 0x02 +#define USA_DATABITS_8 0x03 +#define STOPBITS_5678_1 0x00 // 1 stop bit for all byte sizes +#define STOPBITS_5_1p5 0x04 // 1.5 stop bits for 5-bit byte +#define STOPBITS_678_2 0x04 // 2 stop bits for 6/7/8-bit byte +#define USA_PARITY_NONE 0x00 +#define USA_PARITY_ODD 0x08 +#define USA_PARITY_EVEN 0x18 +#define PARITY_1 0x28 +#define PARITY_0 0x38 + +/* + during normal operation, status messages are returned + to the host whenever the board detects changes. In some + circumstances (e.g. Windows), status messages from the + device cause problems; to shut them off, the host issues + a control message with the disableStatusMessages flags + set (to any non-zero value). The device will respond to + this message, and then suppress further status messages; + it will resume sending status messages any time the host + sends any control message (either global or port-specific). +*/ + +struct keyspan_usa49_globalControlMessage +{ + u8 portNumber, // 0x80 + sendGlobalStatus, // 1/2=number of status responses requested + resetStatusToggle, // 1=reset global status toggle + resetStatusCount, // a cycling value + remoteWakeupEnable, // 0x10=P1, 0x20=P2, 0x40=P3, 0x80=P4 + disableStatusMessages; // 1=send no status until host talks +}; + +/* + Device->host messages send on the global status endpoint + + portNumber message + ---------- -------------------- + 0x00,0x01,0x02,0x03 portStatusMessage + 0x80 globalStatusMessage + 0x81 globalDebugMessage +*/ + +struct keyspan_usa49_portStatusMessage // one for each port +{ + u8 portNumber, // 0,1,2,3 + cts, // reports CTS pin + dcd, // reports DCD pin + dsr, // reports DSR pin + ri, // reports RI pin + _txOff, // transmit has been disabled (by host) + _txXoff, // transmit is in XOFF state (either host or RX XOFF) + rxEnabled, // as configured by rxOn/rxOff 1=on, 0=off + controlResponse,// 1=a control message has been processed + txAck, // ACK (data TX complete) + rs232valid; // RS-232 signal valid +}; + +// bits in RX data message when STAT byte is included +#define RXERROR_OVERRUN 0x02 +#define RXERROR_PARITY 0x04 +#define RXERROR_FRAMING 0x08 +#define RXERROR_BREAK 0x10 + +struct keyspan_usa49_globalStatusMessage +{ + u8 portNumber, // 0x80=globalStatusMessage + sendGlobalStatus, // from request, decremented + resetStatusCount; // as in request +}; + +struct keyspan_usa49_globalDebugMessage +{ + u8 portNumber, // 0x81=globalDebugMessage + n, // typically a count/status byte + b; // typically a data byte +}; + +// ie: the maximum length of an EZUSB endpoint buffer +#define MAX_DATA_LEN 64 + +// update status approx. 60 times a second (16.6666 ms) +#define STATUS_UPDATE_INTERVAL 16 + +// status rationing tuning value (each port gets checked each n ms) +#define STATUS_RATION 10 + +#endif diff --git a/kernel/drivers/usb/serial/keyspan_usa67msg.h b/kernel/drivers/usb/serial/keyspan_usa67msg.h new file mode 100644 index 000000000..20fa3e2f7 --- /dev/null +++ b/kernel/drivers/usb/serial/keyspan_usa67msg.h @@ -0,0 +1,254 @@ +/* + usa67msg.h + + Copyright (c) 1998-2007 InnoSys Incorporated. All Rights Reserved + This file is available under a BSD-style copyright + + Keyspan USB Async Firmware to run on Anchor FX1 + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are + met: + + 1. Redistributions of source code must retain this licence text + without modification, this list of conditions, and the following + disclaimer. The following copyright notice must appear immediately at + the beginning of all source files: + + Copyright (c) 1998-2007 InnoSys Incorporated. All Rights Reserved + + This file is available under a BSD-style copyright + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. The name of InnoSys Incorprated may not be used to endorse or promote + products derived from this software without specific prior written + permission. + + THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, + INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + SUCH DAMAGE. + + Fourth revision: This message format supports the USA28XG + + Buffer formats for RX/TX data messages are not defined by + a structure, but are described here: + + USB OUT (host -> USAxx, transmit) messages contain a + REQUEST_ACK indicator (set to 0xff to request an ACK at the + completion of transmit; 0x00 otherwise), followed by data: + + RQSTACK DAT DAT DAT ... + + with a total data length of up to 63. + + USB IN (USAxx -> host, receive) messages begin with a status + byte in which the 0x80 bit is either: + + (a) 0x80 bit clear + indicates that the bytes following it are all data + bytes: + + STAT DATA DATA DATA DATA DATA ... + + for a total of up to 63 DATA bytes, + + or: + + (b) 0x80 bit set + indiates that the bytes following alternate data and + status bytes: + + STAT DATA STAT DATA STAT DATA STAT DATA ... + + for a total of up to 32 DATA bytes. + + The valid bits in the STAT bytes are: + + OVERRUN 0x02 + PARITY 0x04 + FRAMING 0x08 + BREAK 0x10 + + Notes: + + (1) The OVERRUN bit can appear in either (a) or (b) format + messages, but the but the PARITY/FRAMING/BREAK bits + only appear in (b) format messages. + (2) For the host to determine the exact point at which the + overrun occurred (to identify the point in the data + stream at which the data was lost), it needs to count + 128 characters, starting at the first character of the + message in which OVERRUN was reported; the lost character(s) + would have been received between the 128th and 129th + characters. + (3) An RX data message in which the first byte has 0x80 clear + serves as a "break off" indicator. + + revision history: + + 1999feb10 add reportHskiaChanges to allow us to ignore them + 1999feb10 add txAckThreshold for fast+loose throughput enhancement + 1999mar30 beef up support for RX error reporting + 1999apr14 add resetDataToggle to control message + 2000jan04 merge with usa17msg.h + 2000jun01 add extended BSD-style copyright text + 2001jul05 change message format to improve OVERRUN case + 2002jun05 update copyright date, improve comments + 2006feb06 modify for FX1 chip + +*/ + +#ifndef __USA67MSG__ +#define __USA67MSG__ + + +// all things called "ControlMessage" are sent on the 'control' endpoint + +typedef struct keyspan_usa67_portControlMessage +{ + u8 port; // 0 or 1 (selects port) + /* + there are three types of "commands" sent in the control message: + + 1. configuration changes which must be requested by setting + the corresponding "set" flag (and should only be requested + when necessary, to reduce overhead on the device): + */ + u8 setClocking, // host requests baud rate be set + baudLo, // host does baud divisor calculation + baudHi, // baudHi is only used for first port (gives lower rates) + externalClock_txClocking, + // 0=internal, other=external + + setLcr, // host requests lcr be set + lcr, // use PARITY, STOPBITS, DATABITS below + + setFlowControl, // host requests flow control be set + ctsFlowControl, // 1=use CTS flow control, 0=don't + xonFlowControl, // 1=use XON/XOFF flow control, 0=don't + xonChar, // specified in current character format + xoffChar, // specified in current character format + + setTxTriState_setRts, + // host requests TX tri-state be set + txTriState_rts, // 1=active (normal), 0=tristate (off) + + setHskoa_setDtr, + // host requests HSKOA output be set + hskoa_dtr, // 1=on, 0=off + + setPrescaler, // host requests prescalar be set (default: 13) + prescaler; // specified as N/8; values 8-ff are valid + // must be set any time internal baud rate is set; + // must not be set when external clocking is used + + /* + 3. configuration data which is simply used as is (no overhead, + but must be specified correctly in every host message). + */ + u8 forwardingLength, // forward when this number of chars available + reportHskiaChanges_dsrFlowControl, + // 1=normal; 0=ignore external clock + // 1=use DSR flow control, 0=don't + txAckThreshold, // 0=not allowed, 1=normal, 2-255 deliver ACK faster + loopbackMode; // 0=no loopback, 1=loopback enabled + + /* + 4. commands which are flags only; these are processed in order + (so that, e.g., if both _txOn and _txOff flags are set, the + port ends in a TX_OFF state); any non-zero value is respected + */ + u8 _txOn, // enable transmitting (and continue if there's data) + _txOff, // stop transmitting + txFlush, // toss outbound data + txBreak, // turn on break (cleared by _txOn) + rxOn, // turn on receiver + rxOff, // turn off receiver + rxFlush, // toss inbound data + rxForward, // forward all inbound data, NOW (as if fwdLen==1) + returnStatus, // return current status (even if it hasn't changed) + resetDataToggle;// reset data toggle state to DATA0 + +} keyspan_usa67_portControlMessage; + +// defines for bits in lcr +#define USA_DATABITS_5 0x00 +#define USA_DATABITS_6 0x01 +#define USA_DATABITS_7 0x02 +#define USA_DATABITS_8 0x03 +#define STOPBITS_5678_1 0x00 // 1 stop bit for all byte sizes +#define STOPBITS_5_1p5 0x04 // 1.5 stop bits for 5-bit byte +#define STOPBITS_678_2 0x04 // 2 stop bits for 6/7/8-bit byte +#define USA_PARITY_NONE 0x00 +#define USA_PARITY_ODD 0x08 +#define USA_PARITY_EVEN 0x18 +#define PARITY_1 0x28 +#define PARITY_0 0x38 + +// all things called "StatusMessage" are sent on the status endpoint + +typedef struct keyspan_usa67_portStatusMessage // one for each port +{ + u8 port, // 0=first, 1=second, other=see below + hskia_cts, // reports HSKIA pin + gpia_dcd, // reports GPIA pin + _txOff, // port has been disabled (by host) + _txXoff, // port is in XOFF state (either host or RX XOFF) + txAck, // indicates a TX message acknowledgement + rxEnabled, // as configured by rxOn/rxOff 1=on, 0=off + controlResponse;// 1=a control message has been processed +} keyspan_usa67_portStatusMessage; + +// bits in RX data message when STAT byte is included +#define RXERROR_OVERRUN 0x02 +#define RXERROR_PARITY 0x04 +#define RXERROR_FRAMING 0x08 +#define RXERROR_BREAK 0x10 + +typedef struct keyspan_usa67_globalControlMessage +{ + u8 port, // 3 + sendGlobalStatus, // 2=request for two status responses + resetStatusToggle, // 1=reset global status toggle + resetStatusCount; // a cycling value +} keyspan_usa67_globalControlMessage; + +typedef struct keyspan_usa67_globalStatusMessage +{ + u8 port, // 3 + sendGlobalStatus, // from request, decremented + resetStatusCount; // as in request +} keyspan_usa67_globalStatusMessage; + +typedef struct keyspan_usa67_globalDebugMessage +{ + u8 port, // 2 + a, + b, + c, + d; +} keyspan_usa67_globalDebugMessage; + +// ie: the maximum length of an FX1 endpoint buffer +#define MAX_DATA_LEN 64 + +// update status approx. 60 times a second (16.6666 ms) +#define STATUS_UPDATE_INTERVAL 16 + +// status rationing tuning value (each port gets checked each n ms) +#define STATUS_RATION 10 + +#endif + + diff --git a/kernel/drivers/usb/serial/keyspan_usa90msg.h b/kernel/drivers/usb/serial/keyspan_usa90msg.h new file mode 100644 index 000000000..86708ecd8 --- /dev/null +++ b/kernel/drivers/usb/serial/keyspan_usa90msg.h @@ -0,0 +1,198 @@ +/* + usa90msg.h + + Copyright (c) 1998-2003 InnoSys Incorporated. All Rights Reserved + This file is available under a BSD-style copyright + + Keyspan USB Async Message Formats for the USA19HS + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are + met: + + 1. Redistributions of source code must retain this licence text + without modification, this list of conditions, and the following + disclaimer. The following copyright notice must appear immediately at + the beginning of all source files: + + Copyright (c) 1998-2003 InnoSys Incorporated. All Rights Reserved + + This file is available under a BSD-style copyright + + 2. The name of InnoSys Incorporated may not be used to endorse or promote + products derived from this software without specific prior written + permission. + + THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, + INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + SUCH DAMAGE. + + Revisions: + + 2003feb14 add setTxMode/txMode and cancelRxXoff to portControl + 2003mar21 change name of PARITY_0/1 to add MARK/SPACE +*/ + +#ifndef __USA90MSG__ +#define __USA90MSG__ + +struct keyspan_usa90_portControlMessage +{ + /* + there are three types of "commands" sent in the control message: + + 1. configuration changes which must be requested by setting + the corresponding "set" flag (and should only be requested + when necessary, to reduce overhead on the device): + */ + + u8 setClocking, // host requests baud rate be set + baudLo, // host does baud divisor calculation + baudHi, // host does baud divisor calculation + + setLcr, // host requests lcr be set + lcr, // use PARITY, STOPBITS, DATABITS below + + setRxMode, // set receive mode + rxMode, // RXMODE_DMA or RXMODE_BYHAND + + setTxMode, // set transmit mode + txMode, // TXMODE_DMA or TXMODE_BYHAND + + setTxFlowControl, // host requests tx flow control be set + txFlowControl , // use TX_FLOW... bits below + setRxFlowControl, // host requests rx flow control be set + rxFlowControl, // use RX_FLOW... bits below + sendXoff, // host requests XOFF transmitted immediately + sendXon, // host requests XON char transmitted + xonChar, // specified in current character format + xoffChar, // specified in current character format + + sendChar, // host requests char transmitted immediately + txChar, // character to send + + setRts, // host requests RTS output be set + rts, // 1=on, 0=off + setDtr, // host requests DTR output be set + dtr; // 1=on, 0=off + + + /* + 2. configuration data which is simply used as is + and must be specified correctly in every host message. + */ + + u8 rxForwardingLength, // forward when this number of chars available + rxForwardingTimeout, // (1-31 in ms) + txAckSetting; // 0=don't ack, 1=normal, 2-255 TBD... + /* + 3. Firmware states which cause actions if they change + and must be specified correctly in every host message. + */ + + u8 portEnabled, // 0=disabled, 1=enabled + txFlush, // 0=normal, 1=toss outbound data + txBreak, // 0=break off, 1=break on + loopbackMode; // 0=no loopback, 1=loopback enabled + + /* + 4. commands which are flags only; these are processed in order + (so that, e.g., if rxFlush and rxForward flags are set, the + port will have no data to forward); any non-zero value + is respected + */ + + u8 rxFlush, // toss inbound data + rxForward, // forward all inbound data, NOW (as if fwdLen==1) + cancelRxXoff, // cancel any receive XOFF state (_txXoff) + returnStatus; // return current status NOW +}; + +// defines for bits in lcr +#define USA_DATABITS_5 0x00 +#define USA_DATABITS_6 0x01 +#define USA_DATABITS_7 0x02 +#define USA_DATABITS_8 0x03 +#define STOPBITS_5678_1 0x00 // 1 stop bit for all byte sizes +#define STOPBITS_5_1p5 0x04 // 1.5 stop bits for 5-bit byte +#define STOPBITS_678_2 0x04 // 2 stop bits for 6-8 bit byte +#define USA_PARITY_NONE 0x00 +#define USA_PARITY_ODD 0x08 +#define USA_PARITY_EVEN 0x18 +#define PARITY_MARK_1 0x28 // force parity MARK +#define PARITY_SPACE_0 0x38 // force parity SPACE + +#define TXFLOW_CTS 0x04 +#define TXFLOW_DSR 0x08 +#define TXFLOW_XOFF 0x01 +#define TXFLOW_XOFF_ANY 0x02 +#define TXFLOW_XOFF_BITS (TXFLOW_XOFF | TXFLOW_XOFF_ANY) + +#define RXFLOW_XOFF 0x10 +#define RXFLOW_RTS 0x20 +#define RXFLOW_DTR 0x40 +#define RXFLOW_DSR_SENSITIVITY 0x80 + +#define RXMODE_BYHAND 0x00 +#define RXMODE_DMA 0x02 + +#define TXMODE_BYHAND 0x00 +#define TXMODE_DMA 0x02 + + +// all things called "StatusMessage" are sent on the status endpoint + +struct keyspan_usa90_portStatusMessage +{ + u8 msr, // reports the actual MSR register + cts, // reports CTS pin + dcd, // reports DCD pin + dsr, // reports DSR pin + ri, // reports RI pin + _txXoff, // port is in XOFF state (we received XOFF) + rxBreak, // reports break state + rxOverrun, // count of overrun errors (since last reported) + rxParity, // count of parity errors (since last reported) + rxFrame, // count of frame errors (since last reported) + portState, // PORTSTATE_xxx bits (useful for debugging) + messageAck, // message acknowledgement + charAck, // character acknowledgement + controlResponse; // (value = returnStatus) a control message has been processed +}; + +// bits in RX data message when STAT byte is included + +#define RXERROR_OVERRUN 0x02 +#define RXERROR_PARITY 0x04 +#define RXERROR_FRAMING 0x08 +#define RXERROR_BREAK 0x10 + +#define PORTSTATE_ENABLED 0x80 +#define PORTSTATE_TXFLUSH 0x01 +#define PORTSTATE_TXBREAK 0x02 +#define PORTSTATE_LOOPBACK 0x04 + +// MSR bits + +#define USA_MSR_dCTS 0x01 // CTS has changed since last report +#define USA_MSR_dDSR 0x02 +#define USA_MSR_dRI 0x04 +#define USA_MSR_dDCD 0x08 + +#define USA_MSR_CTS 0x10 // current state of CTS +#define USA_MSR_DSR 0x20 +#define USA_USA_MSR_RI 0x40 +#define MSR_DCD 0x80 + +// ie: the maximum length of an endpoint buffer +#define MAX_DATA_LEN 64 + +#endif diff --git a/kernel/drivers/usb/serial/kl5kusb105.c b/kernel/drivers/usb/serial/kl5kusb105.c new file mode 100644 index 000000000..e020ad28a --- /dev/null +++ b/kernel/drivers/usb/serial/kl5kusb105.c @@ -0,0 +1,606 @@ +/* + * KLSI KL5KUSB105 chip RS232 converter driver + * + * Copyright (C) 2010 Johan Hovold <jhovold@gmail.com> + * Copyright (C) 2001 Utz-Uwe Haus <haus@uuhaus.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * All information about the device was acquired using SniffUSB ans snoopUSB + * on Windows98. + * It was written out of frustration with the PalmConnect USB Serial adapter + * sold by Palm Inc. + * Neither Palm, nor their contractor (MCCI) or their supplier (KLSI) provided + * information that was not already available. + * + * It seems that KLSI bought some silicon-design information from ScanLogic, + * whose SL11R processor is at the core of the KL5KUSB chipset from KLSI. + * KLSI has firmware available for their devices; it is probable that the + * firmware differs from that used by KLSI in their products. If you have an + * original KLSI device and can provide some information on it, I would be + * most interested in adding support for it here. If you have any information + * on the protocol used (or find errors in my reverse-engineered stuff), please + * let me know. + * + * The code was only tested with a PalmConnect USB adapter; if you + * are adventurous, try it with any KLSI-based device and let me know how it + * breaks so that I can fix it! + */ + +/* TODO: + * check modem line signals + * implement handshaking or decide that we do not support it + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/uaccess.h> +#include <asm/unaligned.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include "kl5kusb105.h" + +#define DRIVER_AUTHOR "Utz-Uwe Haus <haus@uuhaus.de>, Johan Hovold <jhovold@gmail.com>" +#define DRIVER_DESC "KLSI KL5KUSB105 chipset USB->Serial Converter driver" + + +/* + * Function prototypes + */ +static int klsi_105_port_probe(struct usb_serial_port *port); +static int klsi_105_port_remove(struct usb_serial_port *port); +static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port); +static void klsi_105_close(struct usb_serial_port *port); +static void klsi_105_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); +static int klsi_105_tiocmget(struct tty_struct *tty); +static void klsi_105_process_read_urb(struct urb *urb); +static int klsi_105_prepare_write_buffer(struct usb_serial_port *port, + void *dest, size_t size); + +/* + * All of the device info needed for the KLSI converters. + */ +static const struct usb_device_id id_table[] = { + { USB_DEVICE(PALMCONNECT_VID, PALMCONNECT_PID) }, + { USB_DEVICE(KLSI_VID, KLSI_KL5KUSB105D_PID) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_serial_driver kl5kusb105d_device = { + .driver = { + .owner = THIS_MODULE, + .name = "kl5kusb105d", + }, + .description = "KL5KUSB105D / PalmConnect", + .id_table = id_table, + .num_ports = 1, + .bulk_out_size = 64, + .open = klsi_105_open, + .close = klsi_105_close, + .set_termios = klsi_105_set_termios, + /*.break_ctl = klsi_105_break_ctl,*/ + .tiocmget = klsi_105_tiocmget, + .port_probe = klsi_105_port_probe, + .port_remove = klsi_105_port_remove, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, + .process_read_urb = klsi_105_process_read_urb, + .prepare_write_buffer = klsi_105_prepare_write_buffer, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &kl5kusb105d_device, NULL +}; + +struct klsi_105_port_settings { + __u8 pktlen; /* always 5, it seems */ + __u8 baudrate; + __u8 databits; + __u8 unknown1; + __u8 unknown2; +} __attribute__ ((packed)); + +struct klsi_105_private { + struct klsi_105_port_settings cfg; + struct ktermios termios; + unsigned long line_state; /* modem line settings */ + spinlock_t lock; +}; + + +/* + * Handle vendor specific USB requests + */ + + +#define KLSI_TIMEOUT 5000 /* default urb timeout */ + +static int klsi_105_chg_port_settings(struct usb_serial_port *port, + struct klsi_105_port_settings *settings) +{ + int rc; + + rc = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + KL5KUSB105A_SIO_SET_DATA, + USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_INTERFACE, + 0, /* value */ + 0, /* index */ + settings, + sizeof(struct klsi_105_port_settings), + KLSI_TIMEOUT); + if (rc < 0) + dev_err(&port->dev, + "Change port settings failed (error = %d)\n", rc); + dev_info(&port->serial->dev->dev, + "%d byte block, baudrate %x, databits %d, u1 %d, u2 %d\n", + settings->pktlen, settings->baudrate, settings->databits, + settings->unknown1, settings->unknown2); + return rc; +} + +/* translate a 16-bit status value from the device to linux's TIO bits */ +static unsigned long klsi_105_status2linestate(const __u16 status) +{ + unsigned long res = 0; + + res = ((status & KL5KUSB105A_DSR) ? TIOCM_DSR : 0) + | ((status & KL5KUSB105A_CTS) ? TIOCM_CTS : 0) + ; + + return res; +} + +/* + * Read line control via vendor command and return result through + * *line_state_p + */ +/* It seems that the status buffer has always only 2 bytes length */ +#define KLSI_STATUSBUF_LEN 2 +static int klsi_105_get_line_state(struct usb_serial_port *port, + unsigned long *line_state_p) +{ + int rc; + u8 *status_buf; + __u16 status; + + dev_info(&port->serial->dev->dev, "sending SIO Poll request\n"); + + status_buf = kmalloc(KLSI_STATUSBUF_LEN, GFP_KERNEL); + if (!status_buf) + return -ENOMEM; + + status_buf[0] = 0xff; + status_buf[1] = 0xff; + rc = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + KL5KUSB105A_SIO_POLL, + USB_TYPE_VENDOR | USB_DIR_IN, + 0, /* value */ + 0, /* index */ + status_buf, KLSI_STATUSBUF_LEN, + 10000 + ); + if (rc < 0) + dev_err(&port->dev, "Reading line status failed (error = %d)\n", + rc); + else { + status = get_unaligned_le16(status_buf); + + dev_info(&port->serial->dev->dev, "read status %x %x\n", + status_buf[0], status_buf[1]); + + *line_state_p = klsi_105_status2linestate(status); + } + + kfree(status_buf); + return rc; +} + + +/* + * Driver's tty interface functions + */ + +static int klsi_105_port_probe(struct usb_serial_port *port) +{ + struct klsi_105_private *priv; + + priv = kmalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + /* set initial values for control structures */ + priv->cfg.pktlen = 5; + priv->cfg.baudrate = kl5kusb105a_sio_b9600; + priv->cfg.databits = kl5kusb105a_dtb_8; + priv->cfg.unknown1 = 0; + priv->cfg.unknown2 = 1; + + priv->line_state = 0; + + spin_lock_init(&priv->lock); + + /* priv->termios is left uninitialized until port opening */ + + usb_set_serial_port_data(port, priv); + + return 0; +} + +static int klsi_105_port_remove(struct usb_serial_port *port) +{ + struct klsi_105_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} + +static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct klsi_105_private *priv = usb_get_serial_port_data(port); + int retval = 0; + int rc; + int i; + unsigned long line_state; + struct klsi_105_port_settings *cfg; + unsigned long flags; + + /* Do a defined restart: + * Set up sane default baud rate and send the 'READ_ON' + * vendor command. + * FIXME: set modem line control (how?) + * Then read the modem line control and store values in + * priv->line_state. + */ + cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); + if (!cfg) + return -ENOMEM; + + cfg->pktlen = 5; + cfg->baudrate = kl5kusb105a_sio_b9600; + cfg->databits = kl5kusb105a_dtb_8; + cfg->unknown1 = 0; + cfg->unknown2 = 1; + klsi_105_chg_port_settings(port, cfg); + + /* set up termios structure */ + spin_lock_irqsave(&priv->lock, flags); + priv->termios.c_iflag = tty->termios.c_iflag; + priv->termios.c_oflag = tty->termios.c_oflag; + priv->termios.c_cflag = tty->termios.c_cflag; + priv->termios.c_lflag = tty->termios.c_lflag; + for (i = 0; i < NCCS; i++) + priv->termios.c_cc[i] = tty->termios.c_cc[i]; + priv->cfg.pktlen = cfg->pktlen; + priv->cfg.baudrate = cfg->baudrate; + priv->cfg.databits = cfg->databits; + priv->cfg.unknown1 = cfg->unknown1; + priv->cfg.unknown2 = cfg->unknown2; + spin_unlock_irqrestore(&priv->lock, flags); + + /* READ_ON and urb submission */ + rc = usb_serial_generic_open(tty, port); + if (rc) { + retval = rc; + goto exit; + } + + rc = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + KL5KUSB105A_SIO_CONFIGURE, + USB_TYPE_VENDOR|USB_DIR_OUT|USB_RECIP_INTERFACE, + KL5KUSB105A_SIO_CONFIGURE_READ_ON, + 0, /* index */ + NULL, + 0, + KLSI_TIMEOUT); + if (rc < 0) { + dev_err(&port->dev, "Enabling read failed (error = %d)\n", rc); + retval = rc; + } else + dev_dbg(&port->dev, "%s - enabled reading\n", __func__); + + rc = klsi_105_get_line_state(port, &line_state); + if (rc >= 0) { + spin_lock_irqsave(&priv->lock, flags); + priv->line_state = line_state; + spin_unlock_irqrestore(&priv->lock, flags); + dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state); + retval = 0; + } else + retval = rc; + +exit: + kfree(cfg); + return retval; +} + +static void klsi_105_close(struct usb_serial_port *port) +{ + int rc; + + /* send READ_OFF */ + rc = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + KL5KUSB105A_SIO_CONFIGURE, + USB_TYPE_VENDOR | USB_DIR_OUT, + KL5KUSB105A_SIO_CONFIGURE_READ_OFF, + 0, /* index */ + NULL, 0, + KLSI_TIMEOUT); + if (rc < 0) + dev_err(&port->dev, "failed to disable read: %d\n", rc); + + /* shutdown our bulk reads and writes */ + usb_serial_generic_close(port); +} + +/* We need to write a complete 64-byte data block and encode the + * number actually sent in the first double-byte, LSB-order. That + * leaves at most 62 bytes of payload. + */ +#define KLSI_HDR_LEN 2 +static int klsi_105_prepare_write_buffer(struct usb_serial_port *port, + void *dest, size_t size) +{ + unsigned char *buf = dest; + int count; + + count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN, size, + &port->lock); + put_unaligned_le16(count, buf); + + return count + KLSI_HDR_LEN; +} + +/* The data received is preceded by a length double-byte in LSB-first order. + */ +static void klsi_105_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + unsigned len; + + /* empty urbs seem to happen, we ignore them */ + if (!urb->actual_length) + return; + + if (urb->actual_length <= KLSI_HDR_LEN) { + dev_dbg(&port->dev, "%s - malformed packet\n", __func__); + return; + } + + len = get_unaligned_le16(data); + if (len > urb->actual_length - KLSI_HDR_LEN) { + dev_dbg(&port->dev, "%s - packet length mismatch\n", __func__); + len = urb->actual_length - KLSI_HDR_LEN; + } + + tty_insert_flip_string(&port->port, data + KLSI_HDR_LEN, len); + tty_flip_buffer_push(&port->port); +} + +static void klsi_105_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old_termios) +{ + struct klsi_105_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; + unsigned int iflag = tty->termios.c_iflag; + unsigned int old_iflag = old_termios->c_iflag; + unsigned int cflag = tty->termios.c_cflag; + unsigned int old_cflag = old_termios->c_cflag; + struct klsi_105_port_settings *cfg; + unsigned long flags; + speed_t baud; + + cfg = kmalloc(sizeof(*cfg), GFP_KERNEL); + if (!cfg) + return; + + /* lock while we are modifying the settings */ + spin_lock_irqsave(&priv->lock, flags); + + /* + * Update baud rate + */ + baud = tty_get_baud_rate(tty); + + if ((cflag & CBAUD) != (old_cflag & CBAUD)) { + /* reassert DTR and (maybe) RTS on transition from B0 */ + if ((old_cflag & CBAUD) == B0) { + dev_dbg(dev, "%s: baud was B0\n", __func__); +#if 0 + priv->control_state |= TIOCM_DTR; + /* don't set RTS if using hardware flow control */ + if (!(old_cflag & CRTSCTS)) + priv->control_state |= TIOCM_RTS; + mct_u232_set_modem_ctrl(serial, priv->control_state); +#endif + } + } + switch (baud) { + case 0: /* handled below */ + break; + case 1200: + priv->cfg.baudrate = kl5kusb105a_sio_b1200; + break; + case 2400: + priv->cfg.baudrate = kl5kusb105a_sio_b2400; + break; + case 4800: + priv->cfg.baudrate = kl5kusb105a_sio_b4800; + break; + case 9600: + priv->cfg.baudrate = kl5kusb105a_sio_b9600; + break; + case 19200: + priv->cfg.baudrate = kl5kusb105a_sio_b19200; + break; + case 38400: + priv->cfg.baudrate = kl5kusb105a_sio_b38400; + break; + case 57600: + priv->cfg.baudrate = kl5kusb105a_sio_b57600; + break; + case 115200: + priv->cfg.baudrate = kl5kusb105a_sio_b115200; + break; + default: + dev_dbg(dev, "unsupported baudrate, using 9600\n"); + priv->cfg.baudrate = kl5kusb105a_sio_b9600; + baud = 9600; + break; + } + if ((cflag & CBAUD) == B0) { + dev_dbg(dev, "%s: baud is B0\n", __func__); + /* Drop RTS and DTR */ + /* maybe this should be simulated by sending read + * disable and read enable messages? + */ + ; +#if 0 + priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); + mct_u232_set_modem_ctrl(serial, priv->control_state); +#endif + } + tty_encode_baud_rate(tty, baud, baud); + + if ((cflag & CSIZE) != (old_cflag & CSIZE)) { + /* set the number of data bits */ + switch (cflag & CSIZE) { + case CS5: + dev_dbg(dev, "%s - 5 bits/byte not supported\n", __func__); + spin_unlock_irqrestore(&priv->lock, flags); + goto err; + case CS6: + dev_dbg(dev, "%s - 6 bits/byte not supported\n", __func__); + spin_unlock_irqrestore(&priv->lock, flags); + goto err; + case CS7: + priv->cfg.databits = kl5kusb105a_dtb_7; + break; + case CS8: + priv->cfg.databits = kl5kusb105a_dtb_8; + break; + default: + dev_err(dev, "CSIZE was not CS5-CS8, using default of 8\n"); + priv->cfg.databits = kl5kusb105a_dtb_8; + break; + } + } + + /* + * Update line control register (LCR) + */ + if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD)) + || (cflag & CSTOPB) != (old_cflag & CSTOPB)) { + /* Not currently supported */ + tty->termios.c_cflag &= ~(PARENB|PARODD|CSTOPB); +#if 0 + priv->last_lcr = 0; + + /* set the parity */ + if (cflag & PARENB) + priv->last_lcr |= (cflag & PARODD) ? + MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN; + else + priv->last_lcr |= MCT_U232_PARITY_NONE; + + /* set the number of stop bits */ + priv->last_lcr |= (cflag & CSTOPB) ? + MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1; + + mct_u232_set_line_ctrl(serial, priv->last_lcr); +#endif + ; + } + /* + * Set flow control: well, I do not really now how to handle DTR/RTS. + * Just do what we have seen with SniffUSB on Win98. + */ + if ((iflag & IXOFF) != (old_iflag & IXOFF) + || (iflag & IXON) != (old_iflag & IXON) + || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { + /* Not currently supported */ + tty->termios.c_cflag &= ~CRTSCTS; + /* Drop DTR/RTS if no flow control otherwise assert */ +#if 0 + if ((iflag & IXOFF) || (iflag & IXON) || (cflag & CRTSCTS)) + priv->control_state |= TIOCM_DTR | TIOCM_RTS; + else + priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); + mct_u232_set_modem_ctrl(serial, priv->control_state); +#endif + ; + } + memcpy(cfg, &priv->cfg, sizeof(*cfg)); + spin_unlock_irqrestore(&priv->lock, flags); + + /* now commit changes to device */ + klsi_105_chg_port_settings(port, cfg); +err: + kfree(cfg); +} + +#if 0 +static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + struct mct_u232_private *priv = + (struct mct_u232_private *)port->private; + unsigned char lcr = priv->last_lcr; + + dev_dbg(&port->dev, "%s - state=%d\n", __func__, break_state); + + /* LOCKING */ + if (break_state) + lcr |= MCT_U232_SET_BREAK; + + mct_u232_set_line_ctrl(serial, lcr); +} +#endif + +static int klsi_105_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct klsi_105_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + int rc; + unsigned long line_state; + + rc = klsi_105_get_line_state(port, &line_state); + if (rc < 0) { + dev_err(&port->dev, + "Reading line control failed (error = %d)\n", rc); + /* better return value? EAGAIN? */ + return rc; + } + + spin_lock_irqsave(&priv->lock, flags); + priv->line_state = line_state; + spin_unlock_irqrestore(&priv->lock, flags); + dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state); + return (int)line_state; +} + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/kl5kusb105.h b/kernel/drivers/usb/serial/kl5kusb105.h new file mode 100644 index 000000000..22a90badc --- /dev/null +++ b/kernel/drivers/usb/serial/kl5kusb105.h @@ -0,0 +1,68 @@ +/* + * Definitions for the KLSI KL5KUSB105 serial port adapter + */ + +/* vendor/product pairs that are known to contain this chipset */ +#define PALMCONNECT_VID 0x0830 +#define PALMCONNECT_PID 0x0080 + +#define KLSI_VID 0x05e9 +#define KLSI_KL5KUSB105D_PID 0x00c0 + +/* Vendor commands: */ + + +/* port table -- the chip supports up to 4 channels */ + +/* baud rates */ + +enum { + kl5kusb105a_sio_b115200 = 0, + kl5kusb105a_sio_b57600 = 1, + kl5kusb105a_sio_b38400 = 2, + kl5kusb105a_sio_b19200 = 4, + kl5kusb105a_sio_b14400 = 5, + kl5kusb105a_sio_b9600 = 6, + kl5kusb105a_sio_b4800 = 8, /* unchecked */ + kl5kusb105a_sio_b2400 = 9, /* unchecked */ + kl5kusb105a_sio_b1200 = 0xa, /* unchecked */ + kl5kusb105a_sio_b600 = 0xb /* unchecked */ +}; + +/* data bits */ +#define kl5kusb105a_dtb_7 7 +#define kl5kusb105a_dtb_8 8 + + + +/* requests: */ +#define KL5KUSB105A_SIO_SET_DATA 1 +#define KL5KUSB105A_SIO_POLL 2 +#define KL5KUSB105A_SIO_CONFIGURE 3 +/* values used for request KL5KUSB105A_SIO_CONFIGURE */ +#define KL5KUSB105A_SIO_CONFIGURE_READ_ON 3 +#define KL5KUSB105A_SIO_CONFIGURE_READ_OFF 2 + +/* Interpretation of modem status lines */ +/* These need sorting out by individually connecting pins and checking + * results. FIXME! + * When data is being sent we see 0x30 in the lower byte; this must + * contain DSR and CTS ... + */ +#define KL5KUSB105A_DSR ((1<<4) | (1<<5)) +#define KL5KUSB105A_CTS ((1<<5) | (1<<4)) + +#define KL5KUSB105A_WANTS_TO_SEND 0x30 +#if 0 +#define KL5KUSB105A_DTR /* Data Terminal Ready */ +#define KL5KUSB105A_CTS /* Clear To Send */ +#define KL5KUSB105A_CD /* Carrier Detect */ +#define KL5KUSB105A_DSR /* Data Set Ready */ +#define KL5KUSB105A_RxD /* Receive pin */ + +#define KL5KUSB105A_LE +#define KL5KUSB105A_RTS +#define KL5KUSB105A_ST +#define KL5KUSB105A_SR +#define KL5KUSB105A_RI /* Ring Indicator */ +#endif diff --git a/kernel/drivers/usb/serial/kobil_sct.c b/kernel/drivers/usb/serial/kobil_sct.c new file mode 100644 index 000000000..2363654ca --- /dev/null +++ b/kernel/drivers/usb/serial/kobil_sct.c @@ -0,0 +1,559 @@ +/* + * KOBIL USB Smart Card Terminal Driver + * + * Copyright (C) 2002 KOBIL Systems GmbH + * Author: Thomas Wahrenbruch + * + * Contact: linuxusb@kobil.de + * + * This program is largely derived from work by the linux-usb group + * and associated source files. Please see the usb/serial files for + * individual credits and copyrights. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Thanks to Greg Kroah-Hartman (greg@kroah.com) for his help and + * patience. + * + * Supported readers: USB TWIN, KAAN Standard Plus and SecOVID Reader Plus + * (Adapter K), B1 Professional and KAAN Professional (Adapter B) + */ + + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/ioctl.h> +#include "kobil_sct.h" + +#define DRIVER_AUTHOR "KOBIL Systems GmbH - http://www.kobil.com" +#define DRIVER_DESC "KOBIL USB Smart Card Terminal Driver (experimental)" + +#define KOBIL_VENDOR_ID 0x0D46 +#define KOBIL_ADAPTER_B_PRODUCT_ID 0x2011 +#define KOBIL_ADAPTER_K_PRODUCT_ID 0x2012 +#define KOBIL_USBTWIN_PRODUCT_ID 0x0078 +#define KOBIL_KAAN_SIM_PRODUCT_ID 0x0081 + +#define KOBIL_TIMEOUT 500 +#define KOBIL_BUF_LENGTH 300 + + +/* Function prototypes */ +static int kobil_port_probe(struct usb_serial_port *probe); +static int kobil_port_remove(struct usb_serial_port *probe); +static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port); +static void kobil_close(struct usb_serial_port *port); +static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); +static int kobil_write_room(struct tty_struct *tty); +static int kobil_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg); +static int kobil_tiocmget(struct tty_struct *tty); +static int kobil_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +static void kobil_read_int_callback(struct urb *urb); +static void kobil_write_int_callback(struct urb *urb); +static void kobil_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); +static void kobil_init_termios(struct tty_struct *tty); + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_B_PRODUCT_ID) }, + { USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_K_PRODUCT_ID) }, + { USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_USBTWIN_PRODUCT_ID) }, + { USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_KAAN_SIM_PRODUCT_ID) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_serial_driver kobil_device = { + .driver = { + .owner = THIS_MODULE, + .name = "kobil", + }, + .description = "KOBIL USB smart card terminal", + .id_table = id_table, + .num_ports = 1, + .port_probe = kobil_port_probe, + .port_remove = kobil_port_remove, + .ioctl = kobil_ioctl, + .set_termios = kobil_set_termios, + .init_termios = kobil_init_termios, + .tiocmget = kobil_tiocmget, + .tiocmset = kobil_tiocmset, + .open = kobil_open, + .close = kobil_close, + .write = kobil_write, + .write_room = kobil_write_room, + .read_int_callback = kobil_read_int_callback, + .write_int_callback = kobil_write_int_callback, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &kobil_device, NULL +}; + +struct kobil_private { + unsigned char buf[KOBIL_BUF_LENGTH]; /* buffer for the APDU to send */ + int filled; /* index of the last char in buf */ + int cur_pos; /* index of the next char to send in buf */ + __u16 device_type; +}; + + +static int kobil_port_probe(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct kobil_private *priv; + + priv = kmalloc(sizeof(struct kobil_private), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->filled = 0; + priv->cur_pos = 0; + priv->device_type = le16_to_cpu(serial->dev->descriptor.idProduct); + + switch (priv->device_type) { + case KOBIL_ADAPTER_B_PRODUCT_ID: + dev_dbg(&serial->dev->dev, "KOBIL B1 PRO / KAAN PRO detected\n"); + break; + case KOBIL_ADAPTER_K_PRODUCT_ID: + dev_dbg(&serial->dev->dev, "KOBIL KAAN Standard Plus / SecOVID Reader Plus detected\n"); + break; + case KOBIL_USBTWIN_PRODUCT_ID: + dev_dbg(&serial->dev->dev, "KOBIL USBTWIN detected\n"); + break; + case KOBIL_KAAN_SIM_PRODUCT_ID: + dev_dbg(&serial->dev->dev, "KOBIL KAAN SIM detected\n"); + break; + } + usb_set_serial_port_data(port, priv); + + return 0; +} + + +static int kobil_port_remove(struct usb_serial_port *port) +{ + struct kobil_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} + +static void kobil_init_termios(struct tty_struct *tty) +{ + /* Default to echo off and other sane device settings */ + tty->termios.c_lflag = 0; + tty->termios.c_iflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE); + tty->termios.c_iflag |= IGNBRK | IGNPAR | IXOFF; + /* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */ + tty->termios.c_oflag &= ~ONLCR; +} + +static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct device *dev = &port->dev; + int result = 0; + struct kobil_private *priv; + unsigned char *transfer_buffer; + int transfer_buffer_length = 8; + + priv = usb_get_serial_port_data(port); + + /* allocate memory for transfer buffer */ + transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL); + if (!transfer_buffer) + return -ENOMEM; + + /* get hardware version */ + result = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + SUSBCRequest_GetMisc, + USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN, + SUSBCR_MSC_GetHWVersion, + 0, + transfer_buffer, + transfer_buffer_length, + KOBIL_TIMEOUT + ); + dev_dbg(dev, "%s - Send get_HW_version URB returns: %i\n", __func__, result); + dev_dbg(dev, "Hardware version: %i.%i.%i\n", transfer_buffer[0], + transfer_buffer[1], transfer_buffer[2]); + + /* get firmware version */ + result = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + SUSBCRequest_GetMisc, + USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN, + SUSBCR_MSC_GetFWVersion, + 0, + transfer_buffer, + transfer_buffer_length, + KOBIL_TIMEOUT + ); + dev_dbg(dev, "%s - Send get_FW_version URB returns: %i\n", __func__, result); + dev_dbg(dev, "Firmware version: %i.%i.%i\n", transfer_buffer[0], + transfer_buffer[1], transfer_buffer[2]); + + if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID || + priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) { + /* Setting Baudrate, Parity and Stopbits */ + result = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + SUSBCRequest_SetBaudRateParityAndStopBits, + USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, + SUSBCR_SBR_9600 | SUSBCR_SPASB_EvenParity | + SUSBCR_SPASB_1StopBit, + 0, + NULL, + 0, + KOBIL_TIMEOUT + ); + dev_dbg(dev, "%s - Send set_baudrate URB returns: %i\n", __func__, result); + + /* reset all queues */ + result = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + SUSBCRequest_Misc, + USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, + SUSBCR_MSC_ResetAllQueues, + 0, + NULL, + 0, + KOBIL_TIMEOUT + ); + dev_dbg(dev, "%s - Send reset_all_queues URB returns: %i\n", __func__, result); + } + if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || + priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID || + priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) { + /* start reading (Adapter B 'cause PNP string) */ + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + dev_dbg(dev, "%s - Send read URB returns: %i\n", __func__, result); + } + + kfree(transfer_buffer); + return 0; +} + + +static void kobil_close(struct usb_serial_port *port) +{ + /* FIXME: Add rts/dtr methods */ + usb_kill_urb(port->interrupt_out_urb); + usb_kill_urb(port->interrupt_in_urb); +} + + +static void kobil_read_int_callback(struct urb *urb) +{ + int result; + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + + if (status) { + dev_dbg(&port->dev, "%s - Read int status not zero: %d\n", __func__, status); + return; + } + + if (urb->actual_length) { + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, + data); + tty_insert_flip_string(&port->port, data, urb->actual_length); + tty_flip_buffer_push(&port->port); + } + + result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); + dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result); +} + + +static void kobil_write_int_callback(struct urb *urb) +{ +} + + +static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + int length = 0; + int result = 0; + int todo = 0; + struct kobil_private *priv; + + if (count == 0) { + dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__); + return 0; + } + + priv = usb_get_serial_port_data(port); + + if (count > (KOBIL_BUF_LENGTH - priv->filled)) { + dev_dbg(&port->dev, "%s - Error: write request bigger than buffer size\n", __func__); + return -ENOMEM; + } + + /* Copy data to buffer */ + memcpy(priv->buf + priv->filled, buf, count); + usb_serial_debug_data(&port->dev, __func__, count, priv->buf + priv->filled); + priv->filled = priv->filled + count; + + /* only send complete block. TWIN, KAAN SIM and adapter K + use the same protocol. */ + if (((priv->device_type != KOBIL_ADAPTER_B_PRODUCT_ID) && (priv->filled > 2) && (priv->filled >= (priv->buf[1] + 3))) || + ((priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) && (priv->filled > 3) && (priv->filled >= (priv->buf[2] + 4)))) { + /* stop reading (except TWIN and KAAN SIM) */ + if ((priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) + || (priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID)) + usb_kill_urb(port->interrupt_in_urb); + + todo = priv->filled - priv->cur_pos; + + while (todo > 0) { + /* max 8 byte in one urb (endpoint size) */ + length = min(todo, port->interrupt_out_size); + /* copy data to transfer buffer */ + memcpy(port->interrupt_out_buffer, + priv->buf + priv->cur_pos, length); + port->interrupt_out_urb->transfer_buffer_length = length; + + priv->cur_pos = priv->cur_pos + length; + result = usb_submit_urb(port->interrupt_out_urb, + GFP_ATOMIC); + dev_dbg(&port->dev, "%s - Send write URB returns: %i\n", __func__, result); + todo = priv->filled - priv->cur_pos; + + if (todo > 0) + msleep(24); + } + + priv->filled = 0; + priv->cur_pos = 0; + + /* start reading (except TWIN and KAAN SIM) */ + if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID || + priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) { + result = usb_submit_urb(port->interrupt_in_urb, + GFP_ATOMIC); + dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result); + } + } + return count; +} + + +static int kobil_write_room(struct tty_struct *tty) +{ + /* FIXME */ + return 8; +} + + +static int kobil_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct kobil_private *priv; + int result; + unsigned char *transfer_buffer; + int transfer_buffer_length = 8; + + priv = usb_get_serial_port_data(port); + if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID + || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) { + /* This device doesn't support ioctl calls */ + return -EINVAL; + } + + /* allocate memory for transfer buffer */ + transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL); + if (!transfer_buffer) + return -ENOMEM; + + result = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + SUSBCRequest_GetStatusLineState, + USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_IN, + 0, + 0, + transfer_buffer, + transfer_buffer_length, + KOBIL_TIMEOUT); + + dev_dbg(&port->dev, "%s - Send get_status_line_state URB returns: %i. Statusline: %02x\n", + __func__, result, transfer_buffer[0]); + + result = 0; + if ((transfer_buffer[0] & SUSBCR_GSL_DSR) != 0) + result = TIOCM_DSR; + kfree(transfer_buffer); + return result; +} + +static int kobil_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct device *dev = &port->dev; + struct kobil_private *priv; + int result; + int dtr = 0; + int rts = 0; + + /* FIXME: locking ? */ + priv = usb_get_serial_port_data(port); + if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID + || priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) { + /* This device doesn't support ioctl calls */ + return -EINVAL; + } + + if (set & TIOCM_RTS) + rts = 1; + if (set & TIOCM_DTR) + dtr = 1; + if (clear & TIOCM_RTS) + rts = 0; + if (clear & TIOCM_DTR) + dtr = 0; + + if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) { + if (dtr != 0) + dev_dbg(dev, "%s - Setting DTR\n", __func__); + else + dev_dbg(dev, "%s - Clearing DTR\n", __func__); + result = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + SUSBCRequest_SetStatusLinesOrQueues, + USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, + ((dtr != 0) ? SUSBCR_SSL_SETDTR : SUSBCR_SSL_CLRDTR), + 0, + NULL, + 0, + KOBIL_TIMEOUT); + } else { + if (rts != 0) + dev_dbg(dev, "%s - Setting RTS\n", __func__); + else + dev_dbg(dev, "%s - Clearing RTS\n", __func__); + result = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + SUSBCRequest_SetStatusLinesOrQueues, + USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, + ((rts != 0) ? SUSBCR_SSL_SETRTS : SUSBCR_SSL_CLRRTS), + 0, + NULL, + 0, + KOBIL_TIMEOUT); + } + dev_dbg(dev, "%s - Send set_status_line URB returns: %i\n", __func__, result); + return (result < 0) ? result : 0; +} + +static void kobil_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old) +{ + struct kobil_private *priv; + int result; + unsigned short urb_val = 0; + int c_cflag = tty->termios.c_cflag; + speed_t speed; + + priv = usb_get_serial_port_data(port); + if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || + priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) { + /* This device doesn't support ioctl calls */ + tty_termios_copy_hw(&tty->termios, old); + return; + } + + speed = tty_get_baud_rate(tty); + switch (speed) { + case 1200: + urb_val = SUSBCR_SBR_1200; + break; + default: + speed = 9600; + case 9600: + urb_val = SUSBCR_SBR_9600; + break; + } + urb_val |= (c_cflag & CSTOPB) ? SUSBCR_SPASB_2StopBits : + SUSBCR_SPASB_1StopBit; + if (c_cflag & PARENB) { + if (c_cflag & PARODD) + urb_val |= SUSBCR_SPASB_OddParity; + else + urb_val |= SUSBCR_SPASB_EvenParity; + } else + urb_val |= SUSBCR_SPASB_NoParity; + tty->termios.c_cflag &= ~CMSPAR; + tty_encode_baud_rate(tty, speed, speed); + + result = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + SUSBCRequest_SetBaudRateParityAndStopBits, + USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, + urb_val, + 0, + NULL, + 0, + KOBIL_TIMEOUT + ); +} + +static int kobil_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + struct kobil_private *priv = usb_get_serial_port_data(port); + int result; + + if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID || + priv->device_type == KOBIL_KAAN_SIM_PRODUCT_ID) + /* This device doesn't support ioctl calls */ + return -ENOIOCTLCMD; + + switch (cmd) { + case TCFLSH: + result = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + SUSBCRequest_Misc, + USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, + SUSBCR_MSC_ResetAllQueues, + 0, + NULL, + 0, + KOBIL_TIMEOUT + ); + + dev_dbg(&port->dev, + "%s - Send reset_all_queues (FLUSH) URB returns: %i\n", + __func__, result); + return (result < 0) ? -EIO: 0; + default: + return -ENOIOCTLCMD; + } +} + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/kobil_sct.h b/kernel/drivers/usb/serial/kobil_sct.h new file mode 100644 index 000000000..be207f715 --- /dev/null +++ b/kernel/drivers/usb/serial/kobil_sct.h @@ -0,0 +1,77 @@ +#define SUSBCRequest_SetBaudRateParityAndStopBits 1 +#define SUSBCR_SBR_MASK 0xFF00 +#define SUSBCR_SBR_1200 0x0100 +#define SUSBCR_SBR_9600 0x0200 +#define SUSBCR_SBR_19200 0x0400 +#define SUSBCR_SBR_28800 0x0800 +#define SUSBCR_SBR_38400 0x1000 +#define SUSBCR_SBR_57600 0x2000 +#define SUSBCR_SBR_115200 0x4000 + +#define SUSBCR_SPASB_MASK 0x0070 +#define SUSBCR_SPASB_NoParity 0x0010 +#define SUSBCR_SPASB_OddParity 0x0020 +#define SUSBCR_SPASB_EvenParity 0x0040 + +#define SUSBCR_SPASB_STPMASK 0x0003 +#define SUSBCR_SPASB_1StopBit 0x0001 +#define SUSBCR_SPASB_2StopBits 0x0002 + +#define SUSBCRequest_SetStatusLinesOrQueues 2 +#define SUSBCR_SSL_SETRTS 0x0001 +#define SUSBCR_SSL_CLRRTS 0x0002 +#define SUSBCR_SSL_SETDTR 0x0004 +#define SUSBCR_SSL_CLRDTR 0x0010 + +/* Kill the pending/current writes to the comm port. */ +#define SUSBCR_SSL_PURGE_TXABORT 0x0100 +/* Kill the pending/current reads to the comm port. */ +#define SUSBCR_SSL_PURGE_RXABORT 0x0200 +/* Kill the transmit queue if there. */ +#define SUSBCR_SSL_PURGE_TXCLEAR 0x0400 +/* Kill the typeahead buffer if there. */ +#define SUSBCR_SSL_PURGE_RXCLEAR 0x0800 + +#define SUSBCRequest_GetStatusLineState 4 +/* Any Character received */ +#define SUSBCR_GSL_RXCHAR 0x0001 +/* Transmitt Queue Empty */ +#define SUSBCR_GSL_TXEMPTY 0x0004 +/* CTS changed state */ +#define SUSBCR_GSL_CTS 0x0008 +/* DSR changed state */ +#define SUSBCR_GSL_DSR 0x0010 +/* RLSD changed state */ +#define SUSBCR_GSL_RLSD 0x0020 +/* BREAK received */ +#define SUSBCR_GSL_BREAK 0x0040 +/* Line status error occurred */ +#define SUSBCR_GSL_ERR 0x0080 +/* Ring signal detected */ +#define SUSBCR_GSL_RING 0x0100 + +#define SUSBCRequest_Misc 8 +/* use a predefined reset sequence */ +#define SUSBCR_MSC_ResetReader 0x0001 +/* use a predefined sequence to reset the internal queues */ +#define SUSBCR_MSC_ResetAllQueues 0x0002 + +#define SUSBCRequest_GetMisc 0x10 + +/* + * get the firmware version from device, coded like this 0xHHLLBBPP with + * HH = Firmware Version High Byte + * LL = Firmware Version Low Byte + * BB = Build Number + * PP = Further Attributes + */ +#define SUSBCR_MSC_GetFWVersion 0x0001 + +/* + * get the hardware version from device coded like this 0xHHLLPPRR with + * HH = Software Version High Byte + * LL = Software Version Low Byte + * PP = Further Attributes + * RR = Reserved for the hardware ID + */ +#define SUSBCR_MSC_GetHWVersion 0x0002 diff --git a/kernel/drivers/usb/serial/mct_u232.c b/kernel/drivers/usb/serial/mct_u232.c new file mode 100644 index 000000000..fd707d6a1 --- /dev/null +++ b/kernel/drivers/usb/serial/mct_u232.c @@ -0,0 +1,771 @@ +/* + * MCT (Magic Control Technology Corp.) USB RS232 Converter Driver + * + * Copyright (C) 2000 Wolfgang Grandegger (wolfgang@ces.ch) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is largely derived from the Belkin USB Serial Adapter Driver + * (see belkin_sa.[ch]). All of the information about the device was acquired + * by using SniffUSB on Windows98. For technical details see mct_u232.h. + * + * William G. Greathouse and Greg Kroah-Hartman provided great help on how to + * do the reverse engineering and how to write a USB serial device driver. + * + * TO BE DONE, TO BE CHECKED: + * DTR/RTS signal handling may be incomplete or incorrect. I have mainly + * implemented what I have seen with SniffUSB or found in belkin_sa.c. + * For further TODOs check also belkin_sa.c. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <asm/unaligned.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/serial.h> +#include "mct_u232.h" + +#define DRIVER_AUTHOR "Wolfgang Grandegger <wolfgang@ces.ch>" +#define DRIVER_DESC "Magic Control Technology USB-RS232 converter driver" + +/* + * Function prototypes + */ +static int mct_u232_port_probe(struct usb_serial_port *port); +static int mct_u232_port_remove(struct usb_serial_port *remove); +static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port); +static void mct_u232_close(struct usb_serial_port *port); +static void mct_u232_dtr_rts(struct usb_serial_port *port, int on); +static void mct_u232_read_int_callback(struct urb *urb); +static void mct_u232_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); +static void mct_u232_break_ctl(struct tty_struct *tty, int break_state); +static int mct_u232_tiocmget(struct tty_struct *tty); +static int mct_u232_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +static void mct_u232_throttle(struct tty_struct *tty); +static void mct_u232_unthrottle(struct tty_struct *tty); + + +/* + * All of the device info needed for the MCT USB-RS232 converter. + */ +static const struct usb_device_id id_table[] = { + { USB_DEVICE(MCT_U232_VID, MCT_U232_PID) }, + { USB_DEVICE(MCT_U232_VID, MCT_U232_SITECOM_PID) }, + { USB_DEVICE(MCT_U232_VID, MCT_U232_DU_H3SP_PID) }, + { USB_DEVICE(MCT_U232_BELKIN_F5U109_VID, MCT_U232_BELKIN_F5U109_PID) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_serial_driver mct_u232_device = { + .driver = { + .owner = THIS_MODULE, + .name = "mct_u232", + }, + .description = "MCT U232", + .id_table = id_table, + .num_ports = 1, + .open = mct_u232_open, + .close = mct_u232_close, + .dtr_rts = mct_u232_dtr_rts, + .throttle = mct_u232_throttle, + .unthrottle = mct_u232_unthrottle, + .read_int_callback = mct_u232_read_int_callback, + .set_termios = mct_u232_set_termios, + .break_ctl = mct_u232_break_ctl, + .tiocmget = mct_u232_tiocmget, + .tiocmset = mct_u232_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .port_probe = mct_u232_port_probe, + .port_remove = mct_u232_port_remove, + .get_icount = usb_serial_generic_get_icount, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &mct_u232_device, NULL +}; + +struct mct_u232_private { + struct urb *read_urb; + spinlock_t lock; + unsigned int control_state; /* Modem Line Setting (TIOCM) */ + unsigned char last_lcr; /* Line Control Register */ + unsigned char last_lsr; /* Line Status Register */ + unsigned char last_msr; /* Modem Status Register */ + unsigned int rx_flags; /* Throttling flags */ +}; + +#define THROTTLED 0x01 + +/* + * Handle vendor specific USB requests + */ + +#define WDR_TIMEOUT 5000 /* default urb timeout */ + +/* + * Later day 2.6.0-test kernels have new baud rates like B230400 which + * we do not know how to support. We ignore them for the moment. + */ +static int mct_u232_calculate_baud_rate(struct usb_serial *serial, + speed_t value, speed_t *result) +{ + *result = value; + + if (le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_SITECOM_PID + || le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_BELKIN_F5U109_PID) { + switch (value) { + case 300: + return 0x01; + case 600: + return 0x02; /* this one not tested */ + case 1200: + return 0x03; + case 2400: + return 0x04; + case 4800: + return 0x06; + case 9600: + return 0x08; + case 19200: + return 0x09; + case 38400: + return 0x0a; + case 57600: + return 0x0b; + case 115200: + return 0x0c; + default: + *result = 9600; + return 0x08; + } + } else { + /* FIXME: Can we use any divider - should we do + divider = 115200/value; + real baud = 115200/divider */ + switch (value) { + case 300: break; + case 600: break; + case 1200: break; + case 2400: break; + case 4800: break; + case 9600: break; + case 19200: break; + case 38400: break; + case 57600: break; + case 115200: break; + default: + value = 9600; + *result = 9600; + } + return 115200/value; + } +} + +static int mct_u232_set_baud_rate(struct tty_struct *tty, + struct usb_serial *serial, struct usb_serial_port *port, speed_t value) +{ + unsigned int divisor; + int rc; + unsigned char *buf; + unsigned char cts_enable_byte = 0; + speed_t speed; + + buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + divisor = mct_u232_calculate_baud_rate(serial, value, &speed); + put_unaligned_le32(cpu_to_le32(divisor), buf); + rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + MCT_U232_SET_BAUD_RATE_REQUEST, + MCT_U232_SET_REQUEST_TYPE, + 0, 0, buf, MCT_U232_SET_BAUD_RATE_SIZE, + WDR_TIMEOUT); + if (rc < 0) /*FIXME: What value speed results */ + dev_err(&port->dev, "Set BAUD RATE %d failed (error = %d)\n", + value, rc); + else + tty_encode_baud_rate(tty, speed, speed); + dev_dbg(&port->dev, "set_baud_rate: value: 0x%x, divisor: 0x%x\n", value, divisor); + + /* Mimic the MCT-supplied Windows driver (version 1.21P.0104), which + always sends two extra USB 'device request' messages after the + 'baud rate change' message. The actual functionality of the + request codes in these messages is not fully understood but these + particular codes are never seen in any operation besides a baud + rate change. Both of these messages send a single byte of data. + In the first message, the value of this byte is always zero. + + The second message has been determined experimentally to control + whether data will be transmitted to a device which is not asserting + the 'CTS' signal. If the second message's data byte is zero, data + will be transmitted even if 'CTS' is not asserted (i.e. no hardware + flow control). if the second message's data byte is nonzero (a + value of 1 is used by this driver), data will not be transmitted to + a device which is not asserting 'CTS'. + */ + + buf[0] = 0; + rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + MCT_U232_SET_UNKNOWN1_REQUEST, + MCT_U232_SET_REQUEST_TYPE, + 0, 0, buf, MCT_U232_SET_UNKNOWN1_SIZE, + WDR_TIMEOUT); + if (rc < 0) + dev_err(&port->dev, "Sending USB device request code %d " + "failed (error = %d)\n", MCT_U232_SET_UNKNOWN1_REQUEST, + rc); + + if (port && C_CRTSCTS(tty)) + cts_enable_byte = 1; + + dev_dbg(&port->dev, "set_baud_rate: send second control message, data = %02X\n", + cts_enable_byte); + buf[0] = cts_enable_byte; + rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + MCT_U232_SET_CTS_REQUEST, + MCT_U232_SET_REQUEST_TYPE, + 0, 0, buf, MCT_U232_SET_CTS_SIZE, + WDR_TIMEOUT); + if (rc < 0) + dev_err(&port->dev, "Sending USB device request code %d " + "failed (error = %d)\n", MCT_U232_SET_CTS_REQUEST, rc); + + kfree(buf); + return rc; +} /* mct_u232_set_baud_rate */ + +static int mct_u232_set_line_ctrl(struct usb_serial_port *port, + unsigned char lcr) +{ + int rc; + unsigned char *buf; + + buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + buf[0] = lcr; + rc = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), + MCT_U232_SET_LINE_CTRL_REQUEST, + MCT_U232_SET_REQUEST_TYPE, + 0, 0, buf, MCT_U232_SET_LINE_CTRL_SIZE, + WDR_TIMEOUT); + if (rc < 0) + dev_err(&port->dev, "Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc); + dev_dbg(&port->dev, "set_line_ctrl: 0x%x\n", lcr); + kfree(buf); + return rc; +} /* mct_u232_set_line_ctrl */ + +static int mct_u232_set_modem_ctrl(struct usb_serial_port *port, + unsigned int control_state) +{ + int rc; + unsigned char mcr; + unsigned char *buf; + + buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + mcr = MCT_U232_MCR_NONE; + if (control_state & TIOCM_DTR) + mcr |= MCT_U232_MCR_DTR; + if (control_state & TIOCM_RTS) + mcr |= MCT_U232_MCR_RTS; + + buf[0] = mcr; + rc = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), + MCT_U232_SET_MODEM_CTRL_REQUEST, + MCT_U232_SET_REQUEST_TYPE, + 0, 0, buf, MCT_U232_SET_MODEM_CTRL_SIZE, + WDR_TIMEOUT); + kfree(buf); + + dev_dbg(&port->dev, "set_modem_ctrl: state=0x%x ==> mcr=0x%x\n", control_state, mcr); + + if (rc < 0) { + dev_err(&port->dev, "Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc); + return rc; + } + return 0; +} /* mct_u232_set_modem_ctrl */ + +static int mct_u232_get_modem_stat(struct usb_serial_port *port, + unsigned char *msr) +{ + int rc; + unsigned char *buf; + + buf = kmalloc(MCT_U232_MAX_SIZE, GFP_KERNEL); + if (buf == NULL) { + *msr = 0; + return -ENOMEM; + } + rc = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), + MCT_U232_GET_MODEM_STAT_REQUEST, + MCT_U232_GET_REQUEST_TYPE, + 0, 0, buf, MCT_U232_GET_MODEM_STAT_SIZE, + WDR_TIMEOUT); + if (rc < 0) { + dev_err(&port->dev, "Get MODEM STATus failed (error = %d)\n", rc); + *msr = 0; + } else { + *msr = buf[0]; + } + dev_dbg(&port->dev, "get_modem_stat: 0x%x\n", *msr); + kfree(buf); + return rc; +} /* mct_u232_get_modem_stat */ + +static void mct_u232_msr_to_icount(struct async_icount *icount, + unsigned char msr) +{ + /* Translate Control Line states */ + if (msr & MCT_U232_MSR_DDSR) + icount->dsr++; + if (msr & MCT_U232_MSR_DCTS) + icount->cts++; + if (msr & MCT_U232_MSR_DRI) + icount->rng++; + if (msr & MCT_U232_MSR_DCD) + icount->dcd++; +} /* mct_u232_msr_to_icount */ + +static void mct_u232_msr_to_state(struct usb_serial_port *port, + unsigned int *control_state, unsigned char msr) +{ + /* Translate Control Line states */ + if (msr & MCT_U232_MSR_DSR) + *control_state |= TIOCM_DSR; + else + *control_state &= ~TIOCM_DSR; + if (msr & MCT_U232_MSR_CTS) + *control_state |= TIOCM_CTS; + else + *control_state &= ~TIOCM_CTS; + if (msr & MCT_U232_MSR_RI) + *control_state |= TIOCM_RI; + else + *control_state &= ~TIOCM_RI; + if (msr & MCT_U232_MSR_CD) + *control_state |= TIOCM_CD; + else + *control_state &= ~TIOCM_CD; + dev_dbg(&port->dev, "msr_to_state: msr=0x%x ==> state=0x%x\n", msr, *control_state); +} /* mct_u232_msr_to_state */ + +/* + * Driver's tty interface functions + */ + +static int mct_u232_port_probe(struct usb_serial_port *port) +{ + struct mct_u232_private *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + /* Use second interrupt-in endpoint for reading. */ + priv->read_urb = port->serial->port[1]->interrupt_in_urb; + priv->read_urb->context = port; + + spin_lock_init(&priv->lock); + + usb_set_serial_port_data(port, priv); + + return 0; +} + +static int mct_u232_port_remove(struct usb_serial_port *port) +{ + struct mct_u232_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} + +static int mct_u232_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct mct_u232_private *priv = usb_get_serial_port_data(port); + int retval = 0; + unsigned int control_state; + unsigned long flags; + unsigned char last_lcr; + unsigned char last_msr; + + /* Compensate for a hardware bug: although the Sitecom U232-P25 + * device reports a maximum output packet size of 32 bytes, + * it seems to be able to accept only 16 bytes (and that's what + * SniffUSB says too...) + */ + if (le16_to_cpu(serial->dev->descriptor.idProduct) + == MCT_U232_SITECOM_PID) + port->bulk_out_size = 16; + + /* Do a defined restart: the normal serial device seems to + * always turn on DTR and RTS here, so do the same. I'm not + * sure if this is really necessary. But it should not harm + * either. + */ + spin_lock_irqsave(&priv->lock, flags); + if (tty && (tty->termios.c_cflag & CBAUD)) + priv->control_state = TIOCM_DTR | TIOCM_RTS; + else + priv->control_state = 0; + + priv->last_lcr = (MCT_U232_DATA_BITS_8 | + MCT_U232_PARITY_NONE | + MCT_U232_STOP_BITS_1); + control_state = priv->control_state; + last_lcr = priv->last_lcr; + spin_unlock_irqrestore(&priv->lock, flags); + mct_u232_set_modem_ctrl(port, control_state); + mct_u232_set_line_ctrl(port, last_lcr); + + /* Read modem status and update control state */ + mct_u232_get_modem_stat(port, &last_msr); + spin_lock_irqsave(&priv->lock, flags); + priv->last_msr = last_msr; + mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr); + spin_unlock_irqrestore(&priv->lock, flags); + + retval = usb_submit_urb(priv->read_urb, GFP_KERNEL); + if (retval) { + dev_err(&port->dev, + "usb_submit_urb(read) failed pipe 0x%x err %d\n", + port->read_urb->pipe, retval); + goto error; + } + + retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (retval) { + usb_kill_urb(priv->read_urb); + dev_err(&port->dev, + "usb_submit_urb(read int) failed pipe 0x%x err %d", + port->interrupt_in_urb->pipe, retval); + goto error; + } + return 0; + +error: + return retval; +} /* mct_u232_open */ + +static void mct_u232_dtr_rts(struct usb_serial_port *port, int on) +{ + unsigned int control_state; + struct mct_u232_private *priv = usb_get_serial_port_data(port); + + spin_lock_irq(&priv->lock); + if (on) + priv->control_state |= TIOCM_DTR | TIOCM_RTS; + else + priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS); + control_state = priv->control_state; + spin_unlock_irq(&priv->lock); + + mct_u232_set_modem_ctrl(port, control_state); +} + +static void mct_u232_close(struct usb_serial_port *port) +{ + struct mct_u232_private *priv = usb_get_serial_port_data(port); + + usb_kill_urb(priv->read_urb); + usb_kill_urb(port->interrupt_in_urb); + + usb_serial_generic_close(port); +} /* mct_u232_close */ + + +static void mct_u232_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct mct_u232_private *priv = usb_get_serial_port_data(port); + unsigned char *data = urb->transfer_buffer; + int retval; + int status = urb->status; + unsigned long flags; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", + __func__, status); + goto exit; + } + + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); + + /* + * Work-a-round: handle the 'usual' bulk-in pipe here + */ + if (urb->transfer_buffer_length > 2) { + if (urb->actual_length) { + tty_insert_flip_string(&port->port, data, + urb->actual_length); + tty_flip_buffer_push(&port->port); + } + goto exit; + } + + /* + * The interrupt-in pipe signals exceptional conditions (modem line + * signal changes and errors). data[0] holds MSR, data[1] holds LSR. + */ + spin_lock_irqsave(&priv->lock, flags); + priv->last_msr = data[MCT_U232_MSR_INDEX]; + + /* Record Control Line states */ + mct_u232_msr_to_state(port, &priv->control_state, priv->last_msr); + + mct_u232_msr_to_icount(&port->icount, priv->last_msr); + +#if 0 + /* Not yet handled. See belkin_sa.c for further information */ + /* Now to report any errors */ + priv->last_lsr = data[MCT_U232_LSR_INDEX]; + /* + * fill in the flip buffer here, but I do not know the relation + * to the current/next receive buffer or characters. I need + * to look in to this before committing any code. + */ + if (priv->last_lsr & MCT_U232_LSR_ERR) { + tty = tty_port_tty_get(&port->port); + /* Overrun Error */ + if (priv->last_lsr & MCT_U232_LSR_OE) { + } + /* Parity Error */ + if (priv->last_lsr & MCT_U232_LSR_PE) { + } + /* Framing Error */ + if (priv->last_lsr & MCT_U232_LSR_FE) { + } + /* Break Indicator */ + if (priv->last_lsr & MCT_U232_LSR_BI) { + } + tty_kref_put(tty); + } +#endif + wake_up_interruptible(&port->port.delta_msr_wait); + spin_unlock_irqrestore(&priv->lock, flags); +exit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + dev_err(&port->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, retval); +} /* mct_u232_read_int_callback */ + +static void mct_u232_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old_termios) +{ + struct usb_serial *serial = port->serial; + struct mct_u232_private *priv = usb_get_serial_port_data(port); + struct ktermios *termios = &tty->termios; + unsigned int cflag = termios->c_cflag; + unsigned int old_cflag = old_termios->c_cflag; + unsigned long flags; + unsigned int control_state; + unsigned char last_lcr; + + /* get a local copy of the current port settings */ + spin_lock_irqsave(&priv->lock, flags); + control_state = priv->control_state; + spin_unlock_irqrestore(&priv->lock, flags); + last_lcr = 0; + + /* + * Update baud rate. + * Do not attempt to cache old rates and skip settings, + * disconnects screw such tricks up completely. + * Premature optimization is the root of all evil. + */ + + /* reassert DTR and RTS on transition from B0 */ + if ((old_cflag & CBAUD) == B0) { + dev_dbg(&port->dev, "%s: baud was B0\n", __func__); + control_state |= TIOCM_DTR | TIOCM_RTS; + mct_u232_set_modem_ctrl(port, control_state); + } + + mct_u232_set_baud_rate(tty, serial, port, tty_get_baud_rate(tty)); + + if ((cflag & CBAUD) == B0) { + dev_dbg(&port->dev, "%s: baud is B0\n", __func__); + /* Drop RTS and DTR */ + control_state &= ~(TIOCM_DTR | TIOCM_RTS); + mct_u232_set_modem_ctrl(port, control_state); + } + + /* + * Update line control register (LCR) + */ + + /* set the parity */ + if (cflag & PARENB) + last_lcr |= (cflag & PARODD) ? + MCT_U232_PARITY_ODD : MCT_U232_PARITY_EVEN; + else + last_lcr |= MCT_U232_PARITY_NONE; + + /* set the number of data bits */ + switch (cflag & CSIZE) { + case CS5: + last_lcr |= MCT_U232_DATA_BITS_5; break; + case CS6: + last_lcr |= MCT_U232_DATA_BITS_6; break; + case CS7: + last_lcr |= MCT_U232_DATA_BITS_7; break; + case CS8: + last_lcr |= MCT_U232_DATA_BITS_8; break; + default: + dev_err(&port->dev, + "CSIZE was not CS5-CS8, using default of 8\n"); + last_lcr |= MCT_U232_DATA_BITS_8; + break; + } + + termios->c_cflag &= ~CMSPAR; + + /* set the number of stop bits */ + last_lcr |= (cflag & CSTOPB) ? + MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1; + + mct_u232_set_line_ctrl(port, last_lcr); + + /* save off the modified port settings */ + spin_lock_irqsave(&priv->lock, flags); + priv->control_state = control_state; + priv->last_lcr = last_lcr; + spin_unlock_irqrestore(&priv->lock, flags); +} /* mct_u232_set_termios */ + +static void mct_u232_break_ctl(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + struct mct_u232_private *priv = usb_get_serial_port_data(port); + unsigned char lcr; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + lcr = priv->last_lcr; + + if (break_state) + lcr |= MCT_U232_SET_BREAK; + spin_unlock_irqrestore(&priv->lock, flags); + + mct_u232_set_line_ctrl(port, lcr); +} /* mct_u232_break_ctl */ + + +static int mct_u232_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct mct_u232_private *priv = usb_get_serial_port_data(port); + unsigned int control_state; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + control_state = priv->control_state; + spin_unlock_irqrestore(&priv->lock, flags); + + return control_state; +} + +static int mct_u232_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct mct_u232_private *priv = usb_get_serial_port_data(port); + unsigned int control_state; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + control_state = priv->control_state; + + if (set & TIOCM_RTS) + control_state |= TIOCM_RTS; + if (set & TIOCM_DTR) + control_state |= TIOCM_DTR; + if (clear & TIOCM_RTS) + control_state &= ~TIOCM_RTS; + if (clear & TIOCM_DTR) + control_state &= ~TIOCM_DTR; + + priv->control_state = control_state; + spin_unlock_irqrestore(&priv->lock, flags); + return mct_u232_set_modem_ctrl(port, control_state); +} + +static void mct_u232_throttle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct mct_u232_private *priv = usb_get_serial_port_data(port); + unsigned int control_state; + + spin_lock_irq(&priv->lock); + priv->rx_flags |= THROTTLED; + if (C_CRTSCTS(tty)) { + priv->control_state &= ~TIOCM_RTS; + control_state = priv->control_state; + spin_unlock_irq(&priv->lock); + mct_u232_set_modem_ctrl(port, control_state); + } else { + spin_unlock_irq(&priv->lock); + } +} + +static void mct_u232_unthrottle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct mct_u232_private *priv = usb_get_serial_port_data(port); + unsigned int control_state; + + spin_lock_irq(&priv->lock); + if ((priv->rx_flags & THROTTLED) && C_CRTSCTS(tty)) { + priv->rx_flags &= ~THROTTLED; + priv->control_state |= TIOCM_RTS; + control_state = priv->control_state; + spin_unlock_irq(&priv->lock); + mct_u232_set_modem_ctrl(port, control_state); + } else { + spin_unlock_irq(&priv->lock); + } +} + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/mct_u232.h b/kernel/drivers/usb/serial/mct_u232.h new file mode 100644 index 000000000..d325bb8cb --- /dev/null +++ b/kernel/drivers/usb/serial/mct_u232.h @@ -0,0 +1,467 @@ +/* + * Definitions for MCT (Magic Control Technology) USB-RS232 Converter Driver + * + * Copyright (C) 2000 Wolfgang Grandegger (wolfgang@ces.ch) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This driver is for the device MCT USB-RS232 Converter (25 pin, Model No. + * U232-P25) from Magic Control Technology Corp. (there is also a 9 pin + * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html + * for further information. The properties of this device are listed at the end + * of this file. This device was used in the Dlink DSB-S25. + * + * All of the information about the device was acquired by using SniffUSB + * on Windows98. The technical details of the reverse engineering are + * summarized at the end of this file. + */ + +#ifndef __LINUX_USB_SERIAL_MCT_U232_H +#define __LINUX_USB_SERIAL_MCT_U232_H + +#define MCT_U232_VID 0x0711 /* Vendor Id */ +#define MCT_U232_PID 0x0210 /* Original MCT Product Id */ + +/* U232-P25, Sitecom */ +#define MCT_U232_SITECOM_PID 0x0230 /* Sitecom Product Id */ + +/* DU-H3SP USB BAY hub */ +#define MCT_U232_DU_H3SP_PID 0x0200 /* D-Link DU-H3SP USB BAY */ + +/* Belkin badge the MCT U232-P9 as the F5U109 */ +#define MCT_U232_BELKIN_F5U109_VID 0x050d /* Vendor Id */ +#define MCT_U232_BELKIN_F5U109_PID 0x0109 /* Product Id */ + +/* + * Vendor Request Interface + */ +#define MCT_U232_SET_REQUEST_TYPE 0x40 +#define MCT_U232_GET_REQUEST_TYPE 0xc0 + +/* Get Modem Status Register (MSR) */ +#define MCT_U232_GET_MODEM_STAT_REQUEST 2 +#define MCT_U232_GET_MODEM_STAT_SIZE 1 + +/* Get Line Control Register (LCR) */ +/* ... not used by this driver */ +#define MCT_U232_GET_LINE_CTRL_REQUEST 6 +#define MCT_U232_GET_LINE_CTRL_SIZE 1 + +/* Set Baud Rate Divisor */ +#define MCT_U232_SET_BAUD_RATE_REQUEST 5 +#define MCT_U232_SET_BAUD_RATE_SIZE 4 + +/* Set Line Control Register (LCR) */ +#define MCT_U232_SET_LINE_CTRL_REQUEST 7 +#define MCT_U232_SET_LINE_CTRL_SIZE 1 + +/* Set Modem Control Register (MCR) */ +#define MCT_U232_SET_MODEM_CTRL_REQUEST 10 +#define MCT_U232_SET_MODEM_CTRL_SIZE 1 + +/* + * This USB device request code is not well understood. It is transmitted by + * the MCT-supplied Windows driver whenever the baud rate changes. + */ +#define MCT_U232_SET_UNKNOWN1_REQUEST 11 /* Unknown functionality */ +#define MCT_U232_SET_UNKNOWN1_SIZE 1 + +/* + * This USB device request code appears to control whether CTS is required + * during transmission. + * + * Sending a zero byte allows data transmission to a device which is not + * asserting CTS. Sending a '1' byte will cause transmission to be deferred + * until the device asserts CTS. + */ +#define MCT_U232_SET_CTS_REQUEST 12 +#define MCT_U232_SET_CTS_SIZE 1 + +#define MCT_U232_MAX_SIZE 4 /* of MCT_XXX_SIZE */ + +/* + * Baud rate (divisor) + * Actually, there are two of them, MCT website calls them "Philips solution" + * and "Intel solution". They are the regular MCT and "Sitecom" for us. + * This is pointless to document in the header, see the code for the bits. + */ +static int mct_u232_calculate_baud_rate(struct usb_serial *serial, + speed_t value, speed_t *result); + +/* + * Line Control Register (LCR) + */ +#define MCT_U232_SET_BREAK 0x40 + +#define MCT_U232_PARITY_SPACE 0x38 +#define MCT_U232_PARITY_MARK 0x28 +#define MCT_U232_PARITY_EVEN 0x18 +#define MCT_U232_PARITY_ODD 0x08 +#define MCT_U232_PARITY_NONE 0x00 + +#define MCT_U232_DATA_BITS_5 0x00 +#define MCT_U232_DATA_BITS_6 0x01 +#define MCT_U232_DATA_BITS_7 0x02 +#define MCT_U232_DATA_BITS_8 0x03 + +#define MCT_U232_STOP_BITS_2 0x04 +#define MCT_U232_STOP_BITS_1 0x00 + +/* + * Modem Control Register (MCR) + */ +#define MCT_U232_MCR_NONE 0x8 /* Deactivate DTR and RTS */ +#define MCT_U232_MCR_RTS 0xa /* Activate RTS */ +#define MCT_U232_MCR_DTR 0x9 /* Activate DTR */ + +/* + * Modem Status Register (MSR) + */ +#define MCT_U232_MSR_INDEX 0x0 /* data[index] */ +#define MCT_U232_MSR_CD 0x80 /* Current CD */ +#define MCT_U232_MSR_RI 0x40 /* Current RI */ +#define MCT_U232_MSR_DSR 0x20 /* Current DSR */ +#define MCT_U232_MSR_CTS 0x10 /* Current CTS */ +#define MCT_U232_MSR_DCD 0x08 /* Delta CD */ +#define MCT_U232_MSR_DRI 0x04 /* Delta RI */ +#define MCT_U232_MSR_DDSR 0x02 /* Delta DSR */ +#define MCT_U232_MSR_DCTS 0x01 /* Delta CTS */ + +/* + * Line Status Register (LSR) + */ +#define MCT_U232_LSR_INDEX 1 /* data[index] */ +#define MCT_U232_LSR_ERR 0x80 /* OE | PE | FE | BI */ +#define MCT_U232_LSR_TEMT 0x40 /* transmit register empty */ +#define MCT_U232_LSR_THRE 0x20 /* transmit holding register empty */ +#define MCT_U232_LSR_BI 0x10 /* break indicator */ +#define MCT_U232_LSR_FE 0x08 /* framing error */ +#define MCT_U232_LSR_OE 0x02 /* overrun error */ +#define MCT_U232_LSR_PE 0x04 /* parity error */ +#define MCT_U232_LSR_OE 0x02 /* overrun error */ +#define MCT_U232_LSR_DR 0x01 /* receive data ready */ + + +/* ----------------------------------------------------------------------------- + * Technical Specification reverse engineered with SniffUSB on Windows98 + * ===================================================================== + * + * The technical details of the device have been acquired be using "SniffUSB" + * and the vendor-supplied device driver (version 2.3A) under Windows98. To + * identify the USB vendor-specific requests and to assign them to terminal + * settings (flow control, baud rate, etc.) the program "SerialSettings" from + * William G. Greathouse has been proven to be very useful. I also used the + * Win98 "HyperTerminal" and "usb-robot" on Linux for testing. The results and + * observations are summarized below: + * + * The USB requests seem to be directly mapped to the registers of a 8250, + * 16450 or 16550 UART. The FreeBSD handbook (appendix F.4 "Input/Output + * devices") contains a comprehensive description of UARTs and its registers. + * The bit descriptions are actually taken from there. + * + * + * Baud rate (divisor) + * ------------------- + * + * BmRequestType: 0x40 (0100 0000B) + * bRequest: 0x05 + * wValue: 0x0000 + * wIndex: 0x0000 + * wLength: 0x0004 + * Data: divisor = 115200 / baud_rate + * + * SniffUSB observations (Nov 2003): Contrary to the 'wLength' value of 4 + * shown above, observations with a Belkin F5U109 adapter, using the + * MCT-supplied Windows98 driver (U2SPORT.VXD, "File version: 1.21P.0104 for + * Win98/Me"), show this request has a length of 1 byte, presumably because + * of the fact that the Belkin adapter and the 'Sitecom U232-P25' adapter + * use a baud-rate code instead of a conventional RS-232 baud rate divisor. + * The current source code for this driver does not reflect this fact, but + * the driver works fine with this adapter/driver combination nonetheless. + * + * + * Line Control Register (LCR) + * --------------------------- + * + * BmRequestType: 0x40 (0100 0000B) 0xc0 (1100 0000B) + * bRequest: 0x07 0x06 + * wValue: 0x0000 + * wIndex: 0x0000 + * wLength: 0x0001 + * Data: LCR (see below) + * + * Bit 7: Divisor Latch Access Bit (DLAB). When set, access to the data + * transmit/receive register (THR/RBR) and the Interrupt Enable Register + * (IER) is disabled. Any access to these ports is now redirected to the + * Divisor Latch Registers. Setting this bit, loading the Divisor + * Registers, and clearing DLAB should be done with interrupts disabled. + * Bit 6: Set Break. When set to "1", the transmitter begins to transmit + * continuous Spacing until this bit is set to "0". This overrides any + * bits of characters that are being transmitted. + * Bit 5: Stick Parity. When parity is enabled, setting this bit causes parity + * to always be "1" or "0", based on the value of Bit 4. + * Bit 4: Even Parity Select (EPS). When parity is enabled and Bit 5 is "0", + * setting this bit causes even parity to be transmitted and expected. + * Otherwise, odd parity is used. + * Bit 3: Parity Enable (PEN). When set to "1", a parity bit is inserted + * between the last bit of the data and the Stop Bit. The UART will also + * expect parity to be present in the received data. + * Bit 2: Number of Stop Bits (STB). If set to "1" and using 5-bit data words, + * 1.5 Stop Bits are transmitted and expected in each data word. For + * 6, 7 and 8-bit data words, 2 Stop Bits are transmitted and expected. + * When this bit is set to "0", one Stop Bit is used on each data word. + * Bit 1: Word Length Select Bit #1 (WLSB1) + * Bit 0: Word Length Select Bit #0 (WLSB0) + * Together these bits specify the number of bits in each data word. + * 1 0 Word Length + * 0 0 5 Data Bits + * 0 1 6 Data Bits + * 1 0 7 Data Bits + * 1 1 8 Data Bits + * + * SniffUSB observations: Bit 7 seems not to be used. There seem to be two bugs + * in the Win98 driver: the break does not work (bit 6 is not asserted) and the + * stick parity bit is not cleared when set once. The LCR can also be read + * back with USB request 6 but this has never been observed with SniffUSB. + * + * + * Modem Control Register (MCR) + * ---------------------------- + * + * BmRequestType: 0x40 (0100 0000B) + * bRequest: 0x0a + * wValue: 0x0000 + * wIndex: 0x0000 + * wLength: 0x0001 + * Data: MCR (Bit 4..7, see below) + * + * Bit 7: Reserved, always 0. + * Bit 6: Reserved, always 0. + * Bit 5: Reserved, always 0. + * Bit 4: Loop-Back Enable. When set to "1", the UART transmitter and receiver + * are internally connected together to allow diagnostic operations. In + * addition, the UART modem control outputs are connected to the UART + * modem control inputs. CTS is connected to RTS, DTR is connected to + * DSR, OUT1 is connected to RI, and OUT 2 is connected to DCD. + * Bit 3: OUT 2. An auxiliary output that the host processor may set high or + * low. In the IBM PC serial adapter (and most clones), OUT 2 is used + * to tri-state (disable) the interrupt signal from the + * 8250/16450/16550 UART. + * Bit 2: OUT 1. An auxiliary output that the host processor may set high or + * low. This output is not used on the IBM PC serial adapter. + * Bit 1: Request to Send (RTS). When set to "1", the output of the UART -RTS + * line is Low (Active). + * Bit 0: Data Terminal Ready (DTR). When set to "1", the output of the UART + * -DTR line is Low (Active). + * + * SniffUSB observations: Bit 2 and 4 seem not to be used but bit 3 has been + * seen _always_ set. + * + * + * Modem Status Register (MSR) + * --------------------------- + * + * BmRequestType: 0xc0 (1100 0000B) + * bRequest: 0x02 + * wValue: 0x0000 + * wIndex: 0x0000 + * wLength: 0x0001 + * Data: MSR (see below) + * + * Bit 7: Data Carrier Detect (CD). Reflects the state of the DCD line on the + * UART. + * Bit 6: Ring Indicator (RI). Reflects the state of the RI line on the UART. + * Bit 5: Data Set Ready (DSR). Reflects the state of the DSR line on the UART. + * Bit 4: Clear To Send (CTS). Reflects the state of the CTS line on the UART. + * Bit 3: Delta Data Carrier Detect (DDCD). Set to "1" if the -DCD line has + * changed state one more more times since the last time the MSR was + * read by the host. + * Bit 2: Trailing Edge Ring Indicator (TERI). Set to "1" if the -RI line has + * had a low to high transition since the last time the MSR was read by + * the host. + * Bit 1: Delta Data Set Ready (DDSR). Set to "1" if the -DSR line has changed + * state one more more times since the last time the MSR was read by the + * host. + * Bit 0: Delta Clear To Send (DCTS). Set to "1" if the -CTS line has changed + * state one more times since the last time the MSR was read by the + * host. + * + * SniffUSB observations: the MSR is also returned as first byte on the + * interrupt-in endpoint 0x83 to signal changes of modem status lines. The USB + * request to read MSR cannot be applied during normal device operation. + * + * + * Line Status Register (LSR) + * -------------------------- + * + * Bit 7 Error in Receiver FIFO. On the 8250/16450 UART, this bit is zero. + * This bit is set to "1" when any of the bytes in the FIFO have one + * or more of the following error conditions: PE, FE, or BI. + * Bit 6 Transmitter Empty (TEMT). When set to "1", there are no words + * remaining in the transmit FIFO or the transmit shift register. The + * transmitter is completely idle. + * Bit 5 Transmitter Holding Register Empty (THRE). When set to "1", the + * FIFO (or holding register) now has room for at least one additional + * word to transmit. The transmitter may still be transmitting when + * this bit is set to "1". + * Bit 4 Break Interrupt (BI). The receiver has detected a Break signal. + * Bit 3 Framing Error (FE). A Start Bit was detected but the Stop Bit did + * not appear at the expected time. The received word is probably + * garbled. + * Bit 2 Parity Error (PE). The parity bit was incorrect for the word + * received. + * Bit 1 Overrun Error (OE). A new word was received and there was no room + * in the receive buffer. The newly-arrived word in the shift register + * is discarded. On 8250/16450 UARTs, the word in the holding register + * is discarded and the newly- arrived word is put in the holding + * register. + * Bit 0 Data Ready (DR). One or more words are in the receive FIFO that the + * host may read. A word must be completely received and moved from + * the shift register into the FIFO (or holding register for + * 8250/16450 designs) before this bit is set. + * + * SniffUSB observations: the LSR is returned as second byte on the + * interrupt-in endpoint 0x83 to signal error conditions. Such errors have + * been seen with minicom/zmodem transfers (CRC errors). + * + * + * Unknown #1 + * ------------------- + * + * BmRequestType: 0x40 (0100 0000B) + * bRequest: 0x0b + * wValue: 0x0000 + * wIndex: 0x0000 + * wLength: 0x0001 + * Data: 0x00 + * + * SniffUSB observations (Nov 2003): With the MCT-supplied Windows98 driver + * (U2SPORT.VXD, "File version: 1.21P.0104 for Win98/Me"), this request + * occurs immediately after a "Baud rate (divisor)" message. It was not + * observed at any other time. It is unclear what purpose this message + * serves. + * + * + * Unknown #2 + * ------------------- + * + * BmRequestType: 0x40 (0100 0000B) + * bRequest: 0x0c + * wValue: 0x0000 + * wIndex: 0x0000 + * wLength: 0x0001 + * Data: 0x00 + * + * SniffUSB observations (Nov 2003): With the MCT-supplied Windows98 driver + * (U2SPORT.VXD, "File version: 1.21P.0104 for Win98/Me"), this request + * occurs immediately after the 'Unknown #1' message (see above). It was + * not observed at any other time. It is unclear what other purpose (if + * any) this message might serve, but without it, the USB/RS-232 adapter + * will not write to RS-232 devices which do not assert the 'CTS' signal. + * + * + * Flow control + * ------------ + * + * SniffUSB observations: no flow control specific requests have been realized + * apart from DTR/RTS settings. Both signals are dropped for no flow control + * but asserted for hardware or software flow control. + * + * + * Endpoint usage + * -------------- + * + * SniffUSB observations: the bulk-out endpoint 0x1 and interrupt-in endpoint + * 0x81 is used to transmit and receive characters. The second interrupt-in + * endpoint 0x83 signals exceptional conditions like modem line changes and + * errors. The first byte returned is the MSR and the second byte the LSR. + * + * + * Other observations + * ------------------ + * + * Queued bulk transfers like used in visor.c did not work. + * + * + * Properties of the USB device used (as found in /var/log/messages) + * ----------------------------------------------------------------- + * + * Manufacturer: MCT Corporation. + * Product: USB-232 Interfact Controller + * SerialNumber: U2S22050 + * + * Length = 18 + * DescriptorType = 01 + * USB version = 1.00 + * Vendor:Product = 0711:0210 + * MaxPacketSize0 = 8 + * NumConfigurations = 1 + * Device version = 1.02 + * Device Class:SubClass:Protocol = 00:00:00 + * Per-interface classes + * Configuration: + * bLength = 9 + * bDescriptorType = 02 + * wTotalLength = 0027 + * bNumInterfaces = 01 + * bConfigurationValue = 01 + * iConfiguration = 00 + * bmAttributes = c0 + * MaxPower = 100mA + * + * Interface: 0 + * Alternate Setting: 0 + * bLength = 9 + * bDescriptorType = 04 + * bInterfaceNumber = 00 + * bAlternateSetting = 00 + * bNumEndpoints = 03 + * bInterface Class:SubClass:Protocol = 00:00:00 + * iInterface = 00 + * Endpoint: + * bLength = 7 + * bDescriptorType = 05 + * bEndpointAddress = 81 (in) + * bmAttributes = 03 (Interrupt) + * wMaxPacketSize = 0040 + * bInterval = 02 + * Endpoint: + * bLength = 7 + * bDescriptorType = 05 + * bEndpointAddress = 01 (out) + * bmAttributes = 02 (Bulk) + * wMaxPacketSize = 0040 + * bInterval = 00 + * Endpoint: + * bLength = 7 + * bDescriptorType = 05 + * bEndpointAddress = 83 (in) + * bmAttributes = 03 (Interrupt) + * wMaxPacketSize = 0002 + * bInterval = 02 + * + * + * Hardware details (added by Martin Hamilton, 2001/12/06) + * ----------------------------------------------------------------- + * + * This info was gleaned from opening a Belkin F5U109 DB9 USB serial + * adaptor, which turns out to simply be a re-badged U232-P9. We + * know this because there is a sticky label on the circuit board + * which says "U232-P9" ;-) + * + * The circuit board inside the adaptor contains a Philips PDIUSBD12 + * USB endpoint chip and a Philips P87C52UBAA microcontroller with + * embedded UART. Exhaustive documentation for these is available at: + * + * http://www.semiconductors.philips.com/pip/p87c52ubaa + * http://www.nxp.com/acrobat_download/various/PDIUSBD12_PROGRAMMING_GUIDE.pdf + * + * Thanks to Julian Highfield for the pointer to the Philips database. + * + */ + +#endif /* __LINUX_USB_SERIAL_MCT_U232_H */ + diff --git a/kernel/drivers/usb/serial/metro-usb.c b/kernel/drivers/usb/serial/metro-usb.c new file mode 100644 index 000000000..39e683096 --- /dev/null +++ b/kernel/drivers/usb/serial/metro-usb.c @@ -0,0 +1,399 @@ +/* + Some of this code is credited to Linux USB open source files that are + distributed with Linux. + + Copyright: 2007 Metrologic Instruments. All rights reserved. + Copyright: 2011 Azimut Ltd. <http://azimutrzn.ru/> +*/ + +#include <linux/kernel.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/usb/serial.h> + +#define DRIVER_DESC "Metrologic Instruments Inc. - USB-POS driver" + +/* Product information. */ +#define FOCUS_VENDOR_ID 0x0C2E +#define FOCUS_PRODUCT_ID_BI 0x0720 +#define FOCUS_PRODUCT_ID_UNI 0x0700 + +#define METROUSB_SET_REQUEST_TYPE 0x40 +#define METROUSB_SET_MODEM_CTRL_REQUEST 10 +#define METROUSB_SET_BREAK_REQUEST 0x40 +#define METROUSB_MCR_NONE 0x08 /* Deactivate DTR and RTS. */ +#define METROUSB_MCR_RTS 0x0a /* Activate RTS. */ +#define METROUSB_MCR_DTR 0x09 /* Activate DTR. */ +#define WDR_TIMEOUT 5000 /* default urb timeout. */ + +/* Private data structure. */ +struct metrousb_private { + spinlock_t lock; + int throttled; + unsigned long control_state; +}; + +/* Device table list. */ +static const struct usb_device_id id_table[] = { + { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_BI) }, + { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_UNI) }, + { }, /* Terminating entry. */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* UNI-Directional mode commands for device configure */ +#define UNI_CMD_OPEN 0x80 +#define UNI_CMD_CLOSE 0xFF + +static inline int metrousb_is_unidirectional_mode(struct usb_serial_port *port) +{ + __u16 product_id = le16_to_cpu( + port->serial->dev->descriptor.idProduct); + + return product_id == FOCUS_PRODUCT_ID_UNI; +} + +static int metrousb_send_unidirectional_cmd(u8 cmd, struct usb_serial_port *port) +{ + int ret; + int actual_len; + u8 *buffer_cmd = NULL; + + if (!metrousb_is_unidirectional_mode(port)) + return 0; + + buffer_cmd = kzalloc(sizeof(cmd), GFP_KERNEL); + if (!buffer_cmd) + return -ENOMEM; + + *buffer_cmd = cmd; + + ret = usb_interrupt_msg(port->serial->dev, + usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress), + buffer_cmd, sizeof(cmd), + &actual_len, USB_CTRL_SET_TIMEOUT); + + kfree(buffer_cmd); + + if (ret < 0) + return ret; + else if (actual_len != sizeof(cmd)) + return -EIO; + return 0; +} + +static void metrousb_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct metrousb_private *metro_priv = usb_get_serial_port_data(port); + unsigned char *data = urb->transfer_buffer; + int throttled = 0; + int result = 0; + unsigned long flags = 0; + + dev_dbg(&port->dev, "%s\n", __func__); + + switch (urb->status) { + case 0: + /* Success status, read from the port. */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* urb has been terminated. */ + dev_dbg(&port->dev, + "%s - urb shutting down, error code=%d\n", + __func__, urb->status); + return; + default: + dev_dbg(&port->dev, + "%s - non-zero urb received, error code=%d\n", + __func__, urb->status); + goto exit; + } + + + /* Set the data read from the usb port into the serial port buffer. */ + if (urb->actual_length) { + /* Loop through the data copying each byte to the tty layer. */ + tty_insert_flip_string(&port->port, data, urb->actual_length); + + /* Force the data to the tty layer. */ + tty_flip_buffer_push(&port->port); + } + + /* Set any port variables. */ + spin_lock_irqsave(&metro_priv->lock, flags); + throttled = metro_priv->throttled; + spin_unlock_irqrestore(&metro_priv->lock, flags); + + /* Continue trying to read if set. */ + if (!throttled) { + usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev, + usb_rcvintpipe(port->serial->dev, port->interrupt_in_endpointAddress), + port->interrupt_in_urb->transfer_buffer, + port->interrupt_in_urb->transfer_buffer_length, + metrousb_read_int_callback, port, 1); + + result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); + + if (result) + dev_err(&port->dev, + "%s - failed submitting interrupt in urb, error code=%d\n", + __func__, result); + } + return; + +exit: + /* Try to resubmit the urb. */ + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) + dev_err(&port->dev, + "%s - failed submitting interrupt in urb, error code=%d\n", + __func__, result); +} + +static void metrousb_write_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + + dev_warn(&port->dev, "%s not implemented yet.\n", + __func__); +} + +static void metrousb_cleanup(struct usb_serial_port *port) +{ + dev_dbg(&port->dev, "%s\n", __func__); + + usb_unlink_urb(port->interrupt_in_urb); + usb_kill_urb(port->interrupt_in_urb); + + metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port); +} + +static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct metrousb_private *metro_priv = usb_get_serial_port_data(port); + unsigned long flags = 0; + int result = 0; + + dev_dbg(&port->dev, "%s\n", __func__); + + /* Make sure the urb is initialized. */ + if (!port->interrupt_in_urb) { + dev_err(&port->dev, "%s - interrupt urb not initialized\n", + __func__); + return -ENODEV; + } + + /* Set the private data information for the port. */ + spin_lock_irqsave(&metro_priv->lock, flags); + metro_priv->control_state = 0; + metro_priv->throttled = 0; + spin_unlock_irqrestore(&metro_priv->lock, flags); + + /* Clear the urb pipe. */ + usb_clear_halt(serial->dev, port->interrupt_in_urb->pipe); + + /* Start reading from the device */ + usb_fill_int_urb(port->interrupt_in_urb, serial->dev, + usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress), + port->interrupt_in_urb->transfer_buffer, + port->interrupt_in_urb->transfer_buffer_length, + metrousb_read_int_callback, port, 1); + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + + if (result) { + dev_err(&port->dev, + "%s - failed submitting interrupt in urb, error code=%d\n", + __func__, result); + goto exit; + } + + /* Send activate cmd to device */ + result = metrousb_send_unidirectional_cmd(UNI_CMD_OPEN, port); + if (result) { + dev_err(&port->dev, + "%s - failed to configure device, error code=%d\n", + __func__, result); + goto exit; + } + + dev_dbg(&port->dev, "%s - port open\n", __func__); +exit: + return result; +} + +static int metrousb_set_modem_ctrl(struct usb_serial *serial, unsigned int control_state) +{ + int retval = 0; + unsigned char mcr = METROUSB_MCR_NONE; + + dev_dbg(&serial->dev->dev, "%s - control state = %d\n", + __func__, control_state); + + /* Set the modem control value. */ + if (control_state & TIOCM_DTR) + mcr |= METROUSB_MCR_DTR; + if (control_state & TIOCM_RTS) + mcr |= METROUSB_MCR_RTS; + + /* Send the command to the usb port. */ + retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + METROUSB_SET_REQUEST_TYPE, METROUSB_SET_MODEM_CTRL_REQUEST, + control_state, 0, NULL, 0, WDR_TIMEOUT); + if (retval < 0) + dev_err(&serial->dev->dev, + "%s - set modem ctrl=0x%x failed, error code=%d\n", + __func__, mcr, retval); + + return retval; +} + +static int metrousb_port_probe(struct usb_serial_port *port) +{ + struct metrousb_private *metro_priv; + + metro_priv = kzalloc(sizeof(*metro_priv), GFP_KERNEL); + if (!metro_priv) + return -ENOMEM; + + spin_lock_init(&metro_priv->lock); + + usb_set_serial_port_data(port, metro_priv); + + return 0; +} + +static int metrousb_port_remove(struct usb_serial_port *port) +{ + struct metrousb_private *metro_priv; + + metro_priv = usb_get_serial_port_data(port); + kfree(metro_priv); + + return 0; +} + +static void metrousb_throttle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct metrousb_private *metro_priv = usb_get_serial_port_data(port); + unsigned long flags = 0; + + dev_dbg(tty->dev, "%s\n", __func__); + + /* Set the private information for the port to stop reading data. */ + spin_lock_irqsave(&metro_priv->lock, flags); + metro_priv->throttled = 1; + spin_unlock_irqrestore(&metro_priv->lock, flags); +} + +static int metrousb_tiocmget(struct tty_struct *tty) +{ + unsigned long control_state = 0; + struct usb_serial_port *port = tty->driver_data; + struct metrousb_private *metro_priv = usb_get_serial_port_data(port); + unsigned long flags = 0; + + dev_dbg(tty->dev, "%s\n", __func__); + + spin_lock_irqsave(&metro_priv->lock, flags); + control_state = metro_priv->control_state; + spin_unlock_irqrestore(&metro_priv->lock, flags); + + return control_state; +} + +static int metrousb_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + struct metrousb_private *metro_priv = usb_get_serial_port_data(port); + unsigned long flags = 0; + unsigned long control_state = 0; + + dev_dbg(tty->dev, "%s - set=%d, clear=%d\n", __func__, set, clear); + + spin_lock_irqsave(&metro_priv->lock, flags); + control_state = metro_priv->control_state; + + /* Set the RTS and DTR values. */ + if (set & TIOCM_RTS) + control_state |= TIOCM_RTS; + if (set & TIOCM_DTR) + control_state |= TIOCM_DTR; + if (clear & TIOCM_RTS) + control_state &= ~TIOCM_RTS; + if (clear & TIOCM_DTR) + control_state &= ~TIOCM_DTR; + + metro_priv->control_state = control_state; + spin_unlock_irqrestore(&metro_priv->lock, flags); + return metrousb_set_modem_ctrl(serial, control_state); +} + +static void metrousb_unthrottle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct metrousb_private *metro_priv = usb_get_serial_port_data(port); + unsigned long flags = 0; + int result = 0; + + dev_dbg(tty->dev, "%s\n", __func__); + + /* Set the private information for the port to resume reading data. */ + spin_lock_irqsave(&metro_priv->lock, flags); + metro_priv->throttled = 0; + spin_unlock_irqrestore(&metro_priv->lock, flags); + + /* Submit the urb to read from the port. */ + port->interrupt_in_urb->dev = port->serial->dev; + result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); + if (result) + dev_err(tty->dev, + "failed submitting interrupt in urb error code=%d\n", + result); +} + +static struct usb_serial_driver metrousb_device = { + .driver = { + .owner = THIS_MODULE, + .name = "metro-usb", + }, + .description = "Metrologic USB to Serial", + .id_table = id_table, + .num_ports = 1, + .open = metrousb_open, + .close = metrousb_cleanup, + .read_int_callback = metrousb_read_int_callback, + .write_int_callback = metrousb_write_int_callback, + .port_probe = metrousb_port_probe, + .port_remove = metrousb_port_remove, + .throttle = metrousb_throttle, + .unthrottle = metrousb_unthrottle, + .tiocmget = metrousb_tiocmget, + .tiocmset = metrousb_tiocmset, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &metrousb_device, + NULL, +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Philip Nicastro"); +MODULE_AUTHOR("Aleksey Babahin <tamerlan311@gmail.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); diff --git a/kernel/drivers/usb/serial/mos7720.c b/kernel/drivers/usb/serial/mos7720.c new file mode 100644 index 000000000..4f70df339 --- /dev/null +++ b/kernel/drivers/usb/serial/mos7720.c @@ -0,0 +1,2060 @@ +/* + * mos7720.c + * Controls the Moschip 7720 usb to dual port serial converter + * + * Copyright 2006 Moschip Semiconductor Tech. Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2 of the License. + * + * Developed by: + * Vijaya Kumar <vijaykumar.gn@gmail.com> + * Ajay Kumar <naanuajay@yahoo.com> + * Gurudeva <ngurudeva@yahoo.com> + * + * Cleaned up from the original by: + * Greg Kroah-Hartman <gregkh@suse.de> + * + * Originally based on drivers/usb/serial/io_edgeport.c which is: + * Copyright (C) 2000 Inside Out Networks, All rights reserved. + * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com> + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/serial.h> +#include <linux/serial_reg.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/uaccess.h> +#include <linux/parport.h> + +#define DRIVER_AUTHOR "Aspire Communications pvt Ltd." +#define DRIVER_DESC "Moschip USB Serial Driver" + +/* default urb timeout */ +#define MOS_WDR_TIMEOUT 5000 + +#define MOS_MAX_PORT 0x02 +#define MOS_WRITE 0x0E +#define MOS_READ 0x0D + +/* Interrupt Routines Defines */ +#define SERIAL_IIR_RLS 0x06 +#define SERIAL_IIR_RDA 0x04 +#define SERIAL_IIR_CTI 0x0c +#define SERIAL_IIR_THR 0x02 +#define SERIAL_IIR_MS 0x00 + +#define NUM_URBS 16 /* URB Count */ +#define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */ + +/* This structure holds all of the local serial port information */ +struct moschip_port { + __u8 shadowLCR; /* last LCR value received */ + __u8 shadowMCR; /* last MCR value received */ + __u8 shadowMSR; /* last MSR value received */ + char open; + struct usb_serial_port *port; /* loop back to the owner */ + struct urb *write_urb_pool[NUM_URBS]; +}; + +static struct usb_serial_driver moschip7720_2port_driver; + +#define USB_VENDOR_ID_MOSCHIP 0x9710 +#define MOSCHIP_DEVICE_ID_7720 0x7720 +#define MOSCHIP_DEVICE_ID_7715 0x7715 + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7720) }, + { USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7715) }, + { } /* terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT + +/* initial values for parport regs */ +#define DCR_INIT_VAL 0x0c /* SLCTIN, nINIT */ +#define ECR_INIT_VAL 0x00 /* SPP mode */ + +struct urbtracker { + struct mos7715_parport *mos_parport; + struct list_head urblist_entry; + struct kref ref_count; + struct urb *urb; + struct usb_ctrlrequest *setup; +}; + +enum mos7715_pp_modes { + SPP = 0<<5, + PS2 = 1<<5, /* moschip calls this 'NIBBLE' mode */ + PPF = 2<<5, /* moschip calls this 'CB-FIFO mode */ +}; + +struct mos7715_parport { + struct parport *pp; /* back to containing struct */ + struct kref ref_count; /* to instance of this struct */ + struct list_head deferred_urbs; /* list deferred async urbs */ + struct list_head active_urbs; /* list async urbs in flight */ + spinlock_t listlock; /* protects list access */ + bool msg_pending; /* usb sync call pending */ + struct completion syncmsg_compl; /* usb sync call completed */ + struct tasklet_struct urb_tasklet; /* for sending deferred urbs */ + struct usb_serial *serial; /* back to containing struct */ + __u8 shadowECR; /* parallel port regs... */ + __u8 shadowDCR; + atomic_t shadowDSR; /* updated in int-in callback */ +}; + +/* lock guards against dereferencing NULL ptr in parport ops callbacks */ +static DEFINE_SPINLOCK(release_lock); + +#endif /* CONFIG_USB_SERIAL_MOS7715_PARPORT */ + +static const unsigned int dummy; /* for clarity in register access fns */ + +enum mos_regs { + THR, /* serial port regs */ + RHR, + IER, + FCR, + ISR, + LCR, + MCR, + LSR, + MSR, + SPR, + DLL, + DLM, + DPR, /* parallel port regs */ + DSR, + DCR, + ECR, + SP1_REG, /* device control regs */ + SP2_REG, /* serial port 2 (7720 only) */ + PP_REG, + SP_CONTROL_REG, +}; + +/* + * Return the correct value for the Windex field of the setup packet + * for a control endpoint message. See the 7715 datasheet. + */ +static inline __u16 get_reg_index(enum mos_regs reg) +{ + static const __u16 mos7715_index_lookup_table[] = { + 0x00, /* THR */ + 0x00, /* RHR */ + 0x01, /* IER */ + 0x02, /* FCR */ + 0x02, /* ISR */ + 0x03, /* LCR */ + 0x04, /* MCR */ + 0x05, /* LSR */ + 0x06, /* MSR */ + 0x07, /* SPR */ + 0x00, /* DLL */ + 0x01, /* DLM */ + 0x00, /* DPR */ + 0x01, /* DSR */ + 0x02, /* DCR */ + 0x0a, /* ECR */ + 0x01, /* SP1_REG */ + 0x02, /* SP2_REG (7720 only) */ + 0x04, /* PP_REG (7715 only) */ + 0x08, /* SP_CONTROL_REG */ + }; + return mos7715_index_lookup_table[reg]; +} + +/* + * Return the correct value for the upper byte of the Wvalue field of + * the setup packet for a control endpoint message. + */ +static inline __u16 get_reg_value(enum mos_regs reg, + unsigned int serial_portnum) +{ + if (reg >= SP1_REG) /* control reg */ + return 0x0000; + + else if (reg >= DPR) /* parallel port reg (7715 only) */ + return 0x0100; + + else /* serial port reg */ + return (serial_portnum + 2) << 8; +} + +/* + * Write data byte to the specified device register. The data is embedded in + * the value field of the setup packet. serial_portnum is ignored for registers + * not specific to a particular serial port. + */ +static int write_mos_reg(struct usb_serial *serial, unsigned int serial_portnum, + enum mos_regs reg, __u8 data) +{ + struct usb_device *usbdev = serial->dev; + unsigned int pipe = usb_sndctrlpipe(usbdev, 0); + __u8 request = (__u8)0x0e; + __u8 requesttype = (__u8)0x40; + __u16 index = get_reg_index(reg); + __u16 value = get_reg_value(reg, serial_portnum) + data; + int status = usb_control_msg(usbdev, pipe, request, requesttype, value, + index, NULL, 0, MOS_WDR_TIMEOUT); + if (status < 0) + dev_err(&usbdev->dev, + "mos7720: usb_control_msg() failed: %d\n", status); + return status; +} + +/* + * Read data byte from the specified device register. The data returned by the + * device is embedded in the value field of the setup packet. serial_portnum is + * ignored for registers that are not specific to a particular serial port. + */ +static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum, + enum mos_regs reg, __u8 *data) +{ + struct usb_device *usbdev = serial->dev; + unsigned int pipe = usb_rcvctrlpipe(usbdev, 0); + __u8 request = (__u8)0x0d; + __u8 requesttype = (__u8)0xc0; + __u16 index = get_reg_index(reg); + __u16 value = get_reg_value(reg, serial_portnum); + u8 *buf; + int status; + + buf = kmalloc(1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + status = usb_control_msg(usbdev, pipe, request, requesttype, value, + index, buf, 1, MOS_WDR_TIMEOUT); + if (status == 1) + *data = *buf; + else if (status < 0) + dev_err(&usbdev->dev, + "mos7720: usb_control_msg() failed: %d\n", status); + kfree(buf); + + return status; +} + +#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT + +static inline int mos7715_change_mode(struct mos7715_parport *mos_parport, + enum mos7715_pp_modes mode) +{ + mos_parport->shadowECR = mode; + write_mos_reg(mos_parport->serial, dummy, ECR, mos_parport->shadowECR); + return 0; +} + +static void destroy_mos_parport(struct kref *kref) +{ + struct mos7715_parport *mos_parport = + container_of(kref, struct mos7715_parport, ref_count); + + kfree(mos_parport); +} + +static void destroy_urbtracker(struct kref *kref) +{ + struct urbtracker *urbtrack = + container_of(kref, struct urbtracker, ref_count); + struct mos7715_parport *mos_parport = urbtrack->mos_parport; + + usb_free_urb(urbtrack->urb); + kfree(urbtrack->setup); + kfree(urbtrack); + kref_put(&mos_parport->ref_count, destroy_mos_parport); +} + +/* + * This runs as a tasklet when sending an urb in a non-blocking parallel + * port callback had to be deferred because the disconnect mutex could not be + * obtained at the time. + */ +static void send_deferred_urbs(unsigned long _mos_parport) +{ + int ret_val; + unsigned long flags; + struct mos7715_parport *mos_parport = (void *)_mos_parport; + struct urbtracker *urbtrack, *tmp; + struct list_head *cursor, *next; + struct device *dev; + + /* if release function ran, game over */ + if (unlikely(mos_parport->serial == NULL)) + return; + + dev = &mos_parport->serial->dev->dev; + + /* try again to get the mutex */ + if (!mutex_trylock(&mos_parport->serial->disc_mutex)) { + dev_dbg(dev, "%s: rescheduling tasklet\n", __func__); + tasklet_schedule(&mos_parport->urb_tasklet); + return; + } + + /* if device disconnected, game over */ + if (unlikely(mos_parport->serial->disconnected)) { + mutex_unlock(&mos_parport->serial->disc_mutex); + return; + } + + spin_lock_irqsave(&mos_parport->listlock, flags); + if (list_empty(&mos_parport->deferred_urbs)) { + spin_unlock_irqrestore(&mos_parport->listlock, flags); + mutex_unlock(&mos_parport->serial->disc_mutex); + dev_dbg(dev, "%s: deferred_urbs list empty\n", __func__); + return; + } + + /* move contents of deferred_urbs list to active_urbs list and submit */ + list_for_each_safe(cursor, next, &mos_parport->deferred_urbs) + list_move_tail(cursor, &mos_parport->active_urbs); + list_for_each_entry_safe(urbtrack, tmp, &mos_parport->active_urbs, + urblist_entry) { + ret_val = usb_submit_urb(urbtrack->urb, GFP_ATOMIC); + dev_dbg(dev, "%s: urb submitted\n", __func__); + if (ret_val) { + dev_err(dev, "usb_submit_urb() failed: %d\n", ret_val); + list_del(&urbtrack->urblist_entry); + kref_put(&urbtrack->ref_count, destroy_urbtracker); + } + } + spin_unlock_irqrestore(&mos_parport->listlock, flags); + mutex_unlock(&mos_parport->serial->disc_mutex); +} + +/* callback for parallel port control urbs submitted asynchronously */ +static void async_complete(struct urb *urb) +{ + struct urbtracker *urbtrack = urb->context; + int status = urb->status; + + if (unlikely(status)) + dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", __func__, status); + + /* remove the urbtracker from the active_urbs list */ + spin_lock(&urbtrack->mos_parport->listlock); + list_del(&urbtrack->urblist_entry); + spin_unlock(&urbtrack->mos_parport->listlock); + kref_put(&urbtrack->ref_count, destroy_urbtracker); +} + +static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport, + enum mos_regs reg, __u8 data) +{ + struct urbtracker *urbtrack; + int ret_val; + unsigned long flags; + struct usb_serial *serial = mos_parport->serial; + struct usb_device *usbdev = serial->dev; + + /* create and initialize the control urb and containing urbtracker */ + urbtrack = kmalloc(sizeof(struct urbtracker), GFP_ATOMIC); + if (!urbtrack) + return -ENOMEM; + + kref_get(&mos_parport->ref_count); + urbtrack->mos_parport = mos_parport; + urbtrack->urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urbtrack->urb) { + kfree(urbtrack); + return -ENOMEM; + } + urbtrack->setup = kmalloc(sizeof(*urbtrack->setup), GFP_ATOMIC); + if (!urbtrack->setup) { + usb_free_urb(urbtrack->urb); + kfree(urbtrack); + return -ENOMEM; + } + urbtrack->setup->bRequestType = (__u8)0x40; + urbtrack->setup->bRequest = (__u8)0x0e; + urbtrack->setup->wValue = cpu_to_le16(get_reg_value(reg, dummy)); + urbtrack->setup->wIndex = cpu_to_le16(get_reg_index(reg)); + urbtrack->setup->wLength = 0; + usb_fill_control_urb(urbtrack->urb, usbdev, + usb_sndctrlpipe(usbdev, 0), + (unsigned char *)urbtrack->setup, + NULL, 0, async_complete, urbtrack); + kref_init(&urbtrack->ref_count); + INIT_LIST_HEAD(&urbtrack->urblist_entry); + + /* + * get the disconnect mutex, or add tracker to the deferred_urbs list + * and schedule a tasklet to try again later + */ + if (!mutex_trylock(&serial->disc_mutex)) { + spin_lock_irqsave(&mos_parport->listlock, flags); + list_add_tail(&urbtrack->urblist_entry, + &mos_parport->deferred_urbs); + spin_unlock_irqrestore(&mos_parport->listlock, flags); + tasklet_schedule(&mos_parport->urb_tasklet); + dev_dbg(&usbdev->dev, "tasklet scheduled\n"); + return 0; + } + + /* bail if device disconnected */ + if (serial->disconnected) { + kref_put(&urbtrack->ref_count, destroy_urbtracker); + mutex_unlock(&serial->disc_mutex); + return -ENODEV; + } + + /* add the tracker to the active_urbs list and submit */ + spin_lock_irqsave(&mos_parport->listlock, flags); + list_add_tail(&urbtrack->urblist_entry, &mos_parport->active_urbs); + spin_unlock_irqrestore(&mos_parport->listlock, flags); + ret_val = usb_submit_urb(urbtrack->urb, GFP_ATOMIC); + mutex_unlock(&serial->disc_mutex); + if (ret_val) { + dev_err(&usbdev->dev, + "%s: submit_urb() failed: %d\n", __func__, ret_val); + spin_lock_irqsave(&mos_parport->listlock, flags); + list_del(&urbtrack->urblist_entry); + spin_unlock_irqrestore(&mos_parport->listlock, flags); + kref_put(&urbtrack->ref_count, destroy_urbtracker); + return ret_val; + } + return 0; +} + +/* + * This is the the common top part of all parallel port callback operations that + * send synchronous messages to the device. This implements convoluted locking + * that avoids two scenarios: (1) a port operation is called after usbserial + * has called our release function, at which point struct mos7715_parport has + * been destroyed, and (2) the device has been disconnected, but usbserial has + * not called the release function yet because someone has a serial port open. + * The shared release_lock prevents the first, and the mutex and disconnected + * flag maintained by usbserial covers the second. We also use the msg_pending + * flag to ensure that all synchronous usb message calls have completed before + * our release function can return. + */ +static int parport_prologue(struct parport *pp) +{ + struct mos7715_parport *mos_parport; + + spin_lock(&release_lock); + mos_parport = pp->private_data; + if (unlikely(mos_parport == NULL)) { + /* release fn called, port struct destroyed */ + spin_unlock(&release_lock); + return -1; + } + mos_parport->msg_pending = true; /* synch usb call pending */ + reinit_completion(&mos_parport->syncmsg_compl); + spin_unlock(&release_lock); + + mutex_lock(&mos_parport->serial->disc_mutex); + if (mos_parport->serial->disconnected) { + /* device disconnected */ + mutex_unlock(&mos_parport->serial->disc_mutex); + mos_parport->msg_pending = false; + complete(&mos_parport->syncmsg_compl); + return -1; + } + + return 0; +} + +/* + * This is the common bottom part of all parallel port functions that send + * synchronous messages to the device. + */ +static inline void parport_epilogue(struct parport *pp) +{ + struct mos7715_parport *mos_parport = pp->private_data; + mutex_unlock(&mos_parport->serial->disc_mutex); + mos_parport->msg_pending = false; + complete(&mos_parport->syncmsg_compl); +} + +static void parport_mos7715_write_data(struct parport *pp, unsigned char d) +{ + struct mos7715_parport *mos_parport = pp->private_data; + + if (parport_prologue(pp) < 0) + return; + mos7715_change_mode(mos_parport, SPP); + write_mos_reg(mos_parport->serial, dummy, DPR, (__u8)d); + parport_epilogue(pp); +} + +static unsigned char parport_mos7715_read_data(struct parport *pp) +{ + struct mos7715_parport *mos_parport = pp->private_data; + unsigned char d; + + if (parport_prologue(pp) < 0) + return 0; + read_mos_reg(mos_parport->serial, dummy, DPR, &d); + parport_epilogue(pp); + return d; +} + +static void parport_mos7715_write_control(struct parport *pp, unsigned char d) +{ + struct mos7715_parport *mos_parport = pp->private_data; + __u8 data; + + if (parport_prologue(pp) < 0) + return; + data = ((__u8)d & 0x0f) | (mos_parport->shadowDCR & 0xf0); + write_mos_reg(mos_parport->serial, dummy, DCR, data); + mos_parport->shadowDCR = data; + parport_epilogue(pp); +} + +static unsigned char parport_mos7715_read_control(struct parport *pp) +{ + struct mos7715_parport *mos_parport = pp->private_data; + __u8 dcr; + + spin_lock(&release_lock); + mos_parport = pp->private_data; + if (unlikely(mos_parport == NULL)) { + spin_unlock(&release_lock); + return 0; + } + dcr = mos_parport->shadowDCR & 0x0f; + spin_unlock(&release_lock); + return dcr; +} + +static unsigned char parport_mos7715_frob_control(struct parport *pp, + unsigned char mask, + unsigned char val) +{ + struct mos7715_parport *mos_parport = pp->private_data; + __u8 dcr; + + mask &= 0x0f; + val &= 0x0f; + if (parport_prologue(pp) < 0) + return 0; + mos_parport->shadowDCR = (mos_parport->shadowDCR & (~mask)) ^ val; + write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR); + dcr = mos_parport->shadowDCR & 0x0f; + parport_epilogue(pp); + return dcr; +} + +static unsigned char parport_mos7715_read_status(struct parport *pp) +{ + unsigned char status; + struct mos7715_parport *mos_parport = pp->private_data; + + spin_lock(&release_lock); + mos_parport = pp->private_data; + if (unlikely(mos_parport == NULL)) { /* release called */ + spin_unlock(&release_lock); + return 0; + } + status = atomic_read(&mos_parport->shadowDSR) & 0xf8; + spin_unlock(&release_lock); + return status; +} + +static void parport_mos7715_enable_irq(struct parport *pp) +{ +} + +static void parport_mos7715_disable_irq(struct parport *pp) +{ +} + +static void parport_mos7715_data_forward(struct parport *pp) +{ + struct mos7715_parport *mos_parport = pp->private_data; + + if (parport_prologue(pp) < 0) + return; + mos7715_change_mode(mos_parport, PS2); + mos_parport->shadowDCR &= ~0x20; + write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR); + parport_epilogue(pp); +} + +static void parport_mos7715_data_reverse(struct parport *pp) +{ + struct mos7715_parport *mos_parport = pp->private_data; + + if (parport_prologue(pp) < 0) + return; + mos7715_change_mode(mos_parport, PS2); + mos_parport->shadowDCR |= 0x20; + write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR); + parport_epilogue(pp); +} + +static void parport_mos7715_init_state(struct pardevice *dev, + struct parport_state *s) +{ + s->u.pc.ctr = DCR_INIT_VAL; + s->u.pc.ecr = ECR_INIT_VAL; +} + +/* N.B. Parport core code requires that this function not block */ +static void parport_mos7715_save_state(struct parport *pp, + struct parport_state *s) +{ + struct mos7715_parport *mos_parport; + + spin_lock(&release_lock); + mos_parport = pp->private_data; + if (unlikely(mos_parport == NULL)) { /* release called */ + spin_unlock(&release_lock); + return; + } + s->u.pc.ctr = mos_parport->shadowDCR; + s->u.pc.ecr = mos_parport->shadowECR; + spin_unlock(&release_lock); +} + +/* N.B. Parport core code requires that this function not block */ +static void parport_mos7715_restore_state(struct parport *pp, + struct parport_state *s) +{ + struct mos7715_parport *mos_parport; + + spin_lock(&release_lock); + mos_parport = pp->private_data; + if (unlikely(mos_parport == NULL)) { /* release called */ + spin_unlock(&release_lock); + return; + } + write_parport_reg_nonblock(mos_parport, DCR, mos_parport->shadowDCR); + write_parport_reg_nonblock(mos_parport, ECR, mos_parport->shadowECR); + spin_unlock(&release_lock); +} + +static size_t parport_mos7715_write_compat(struct parport *pp, + const void *buffer, + size_t len, int flags) +{ + int retval; + struct mos7715_parport *mos_parport = pp->private_data; + int actual_len; + + if (parport_prologue(pp) < 0) + return 0; + mos7715_change_mode(mos_parport, PPF); + retval = usb_bulk_msg(mos_parport->serial->dev, + usb_sndbulkpipe(mos_parport->serial->dev, 2), + (void *)buffer, len, &actual_len, + MOS_WDR_TIMEOUT); + parport_epilogue(pp); + if (retval) { + dev_err(&mos_parport->serial->dev->dev, + "mos7720: usb_bulk_msg() failed: %d\n", retval); + return 0; + } + return actual_len; +} + +static struct parport_operations parport_mos7715_ops = { + .owner = THIS_MODULE, + .write_data = parport_mos7715_write_data, + .read_data = parport_mos7715_read_data, + + .write_control = parport_mos7715_write_control, + .read_control = parport_mos7715_read_control, + .frob_control = parport_mos7715_frob_control, + + .read_status = parport_mos7715_read_status, + + .enable_irq = parport_mos7715_enable_irq, + .disable_irq = parport_mos7715_disable_irq, + + .data_forward = parport_mos7715_data_forward, + .data_reverse = parport_mos7715_data_reverse, + + .init_state = parport_mos7715_init_state, + .save_state = parport_mos7715_save_state, + .restore_state = parport_mos7715_restore_state, + + .compat_write_data = parport_mos7715_write_compat, + + .nibble_read_data = parport_ieee1284_read_nibble, + .byte_read_data = parport_ieee1284_read_byte, +}; + +/* + * Allocate and initialize parallel port control struct, initialize + * the parallel port hardware device, and register with the parport subsystem. + */ +static int mos7715_parport_init(struct usb_serial *serial) +{ + struct mos7715_parport *mos_parport; + + /* allocate and initialize parallel port control struct */ + mos_parport = kzalloc(sizeof(struct mos7715_parport), GFP_KERNEL); + if (!mos_parport) + return -ENOMEM; + + mos_parport->msg_pending = false; + kref_init(&mos_parport->ref_count); + spin_lock_init(&mos_parport->listlock); + INIT_LIST_HEAD(&mos_parport->active_urbs); + INIT_LIST_HEAD(&mos_parport->deferred_urbs); + usb_set_serial_data(serial, mos_parport); /* hijack private pointer */ + mos_parport->serial = serial; + tasklet_init(&mos_parport->urb_tasklet, send_deferred_urbs, + (unsigned long) mos_parport); + init_completion(&mos_parport->syncmsg_compl); + + /* cycle parallel port reset bit */ + write_mos_reg(mos_parport->serial, dummy, PP_REG, (__u8)0x80); + write_mos_reg(mos_parport->serial, dummy, PP_REG, (__u8)0x00); + + /* initialize device registers */ + mos_parport->shadowDCR = DCR_INIT_VAL; + write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR); + mos_parport->shadowECR = ECR_INIT_VAL; + write_mos_reg(mos_parport->serial, dummy, ECR, mos_parport->shadowECR); + + /* register with parport core */ + mos_parport->pp = parport_register_port(0, PARPORT_IRQ_NONE, + PARPORT_DMA_NONE, + &parport_mos7715_ops); + if (mos_parport->pp == NULL) { + dev_err(&serial->interface->dev, + "Could not register parport\n"); + kref_put(&mos_parport->ref_count, destroy_mos_parport); + return -EIO; + } + mos_parport->pp->private_data = mos_parport; + mos_parport->pp->modes = PARPORT_MODE_COMPAT | PARPORT_MODE_PCSPP; + mos_parport->pp->dev = &serial->interface->dev; + parport_announce_port(mos_parport->pp); + + return 0; +} +#endif /* CONFIG_USB_SERIAL_MOS7715_PARPORT */ + +/* + * mos7720_interrupt_callback + * this is the callback function for when we have received data on the + * interrupt endpoint. + */ +static void mos7720_interrupt_callback(struct urb *urb) +{ + int result; + int length; + int status = urb->status; + struct device *dev = &urb->dev->dev; + __u8 *data; + __u8 sp1; + __u8 sp2; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); + return; + default: + dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); + goto exit; + } + + length = urb->actual_length; + data = urb->transfer_buffer; + + /* Moschip get 4 bytes + * Byte 1 IIR Port 1 (port.number is 0) + * Byte 2 IIR Port 2 (port.number is 1) + * Byte 3 -------------- + * Byte 4 FIFO status for both */ + + /* the above description is inverted + * oneukum 2007-03-14 */ + + if (unlikely(length != 4)) { + dev_dbg(dev, "Wrong data !!!\n"); + return; + } + + sp1 = data[3]; + sp2 = data[2]; + + if ((sp1 | sp2) & 0x01) { + /* No Interrupt Pending in both the ports */ + dev_dbg(dev, "No Interrupt !!!\n"); + } else { + switch (sp1 & 0x0f) { + case SERIAL_IIR_RLS: + dev_dbg(dev, "Serial Port 1: Receiver status error or address bit detected in 9-bit mode\n"); + break; + case SERIAL_IIR_CTI: + dev_dbg(dev, "Serial Port 1: Receiver time out\n"); + break; + case SERIAL_IIR_MS: + /* dev_dbg(dev, "Serial Port 1: Modem status change\n"); */ + break; + } + + switch (sp2 & 0x0f) { + case SERIAL_IIR_RLS: + dev_dbg(dev, "Serial Port 2: Receiver status error or address bit detected in 9-bit mode\n"); + break; + case SERIAL_IIR_CTI: + dev_dbg(dev, "Serial Port 2: Receiver time out\n"); + break; + case SERIAL_IIR_MS: + /* dev_dbg(dev, "Serial Port 2: Modem status change\n"); */ + break; + } + } + +exit: + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) + dev_err(dev, "%s - Error %d submitting control urb\n", __func__, result); +} + +/* + * mos7715_interrupt_callback + * this is the 7715's callback function for when we have received data on + * the interrupt endpoint. + */ +static void mos7715_interrupt_callback(struct urb *urb) +{ + int result; + int length; + int status = urb->status; + struct device *dev = &urb->dev->dev; + __u8 *data; + __u8 iir; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + case -ENODEV: + /* this urb is terminated, clean up */ + dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); + return; + default: + dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); + goto exit; + } + + length = urb->actual_length; + data = urb->transfer_buffer; + + /* Structure of data from 7715 device: + * Byte 1: IIR serial Port + * Byte 2: unused + * Byte 2: DSR parallel port + * Byte 4: FIFO status for both */ + + if (unlikely(length != 4)) { + dev_dbg(dev, "Wrong data !!!\n"); + return; + } + + iir = data[0]; + if (!(iir & 0x01)) { /* serial port interrupt pending */ + switch (iir & 0x0f) { + case SERIAL_IIR_RLS: + dev_dbg(dev, "Serial Port: Receiver status error or address bit detected in 9-bit mode\n"); + break; + case SERIAL_IIR_CTI: + dev_dbg(dev, "Serial Port: Receiver time out\n"); + break; + case SERIAL_IIR_MS: + /* dev_dbg(dev, "Serial Port: Modem status change\n"); */ + break; + } + } + +#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT + { /* update local copy of DSR reg */ + struct usb_serial_port *port = urb->context; + struct mos7715_parport *mos_parport = port->serial->private; + if (unlikely(mos_parport == NULL)) + return; + atomic_set(&mos_parport->shadowDSR, data[2]); + } +#endif + +exit: + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) + dev_err(dev, "%s - Error %d submitting control urb\n", __func__, result); +} + +/* + * mos7720_bulk_in_callback + * this is the callback function for when we have received data on the + * bulk in endpoint. + */ +static void mos7720_bulk_in_callback(struct urb *urb) +{ + int retval; + unsigned char *data ; + struct usb_serial_port *port; + int status = urb->status; + + if (status) { + dev_dbg(&urb->dev->dev, "nonzero read bulk status received: %d\n", status); + return; + } + + port = urb->context; + + dev_dbg(&port->dev, "Entering...%s\n", __func__); + + data = urb->transfer_buffer; + + if (urb->actual_length) { + tty_insert_flip_string(&port->port, data, urb->actual_length); + tty_flip_buffer_push(&port->port); + } + + if (port->read_urb->status != -EINPROGRESS) { + retval = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (retval) + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, retval = %d\n", retval); + } +} + +/* + * mos7720_bulk_out_data_callback + * this is the callback function for when we have finished sending serial + * data on the bulk out endpoint. + */ +static void mos7720_bulk_out_data_callback(struct urb *urb) +{ + struct moschip_port *mos7720_port; + int status = urb->status; + + if (status) { + dev_dbg(&urb->dev->dev, "nonzero write bulk status received:%d\n", status); + return; + } + + mos7720_port = urb->context; + if (!mos7720_port) { + dev_dbg(&urb->dev->dev, "NULL mos7720_port pointer\n"); + return ; + } + + if (mos7720_port->open) + tty_port_tty_wakeup(&mos7720_port->port->port); +} + +/* + * mos77xx_probe + * this function installs the appropriate read interrupt endpoint callback + * depending on whether the device is a 7720 or 7715, thus avoiding costly + * run-time checks in the high-frequency callback routine itself. + */ +static int mos77xx_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + if (id->idProduct == MOSCHIP_DEVICE_ID_7715) + moschip7720_2port_driver.read_int_callback = + mos7715_interrupt_callback; + else + moschip7720_2port_driver.read_int_callback = + mos7720_interrupt_callback; + + return 0; +} + +static int mos77xx_calc_num_ports(struct usb_serial *serial) +{ + u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); + if (product == MOSCHIP_DEVICE_ID_7715) + return 1; + + return 2; +} + +static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct usb_serial *serial; + struct urb *urb; + struct moschip_port *mos7720_port; + int response; + int port_number; + __u8 data; + int allocated_urbs = 0; + int j; + + serial = port->serial; + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) + return -ENODEV; + + usb_clear_halt(serial->dev, port->write_urb->pipe); + usb_clear_halt(serial->dev, port->read_urb->pipe); + + /* Initialising the write urb pool */ + for (j = 0; j < NUM_URBS; ++j) { + urb = usb_alloc_urb(0, GFP_KERNEL); + mos7720_port->write_urb_pool[j] = urb; + if (!urb) + continue; + + urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, + GFP_KERNEL); + if (!urb->transfer_buffer) { + usb_free_urb(mos7720_port->write_urb_pool[j]); + mos7720_port->write_urb_pool[j] = NULL; + continue; + } + allocated_urbs++; + } + + if (!allocated_urbs) + return -ENOMEM; + + /* Initialize MCS7720 -- Write Init values to corresponding Registers + * + * Register Index + * 0 : THR/RHR + * 1 : IER + * 2 : FCR + * 3 : LCR + * 4 : MCR + * 5 : LSR + * 6 : MSR + * 7 : SPR + * + * 0x08 : SP1/2 Control Reg + */ + port_number = port->port_number; + read_mos_reg(serial, port_number, LSR, &data); + + dev_dbg(&port->dev, "SS::%p LSR:%x\n", mos7720_port, data); + + write_mos_reg(serial, dummy, SP1_REG, 0x02); + write_mos_reg(serial, dummy, SP2_REG, 0x02); + + write_mos_reg(serial, port_number, IER, 0x00); + write_mos_reg(serial, port_number, FCR, 0x00); + + write_mos_reg(serial, port_number, FCR, 0xcf); + mos7720_port->shadowLCR = 0x03; + write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR); + mos7720_port->shadowMCR = 0x0b; + write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR); + + write_mos_reg(serial, port_number, SP_CONTROL_REG, 0x00); + read_mos_reg(serial, dummy, SP_CONTROL_REG, &data); + data = data | (port->port_number + 1); + write_mos_reg(serial, dummy, SP_CONTROL_REG, data); + mos7720_port->shadowLCR = 0x83; + write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR); + write_mos_reg(serial, port_number, THR, 0x0c); + write_mos_reg(serial, port_number, IER, 0x00); + mos7720_port->shadowLCR = 0x03; + write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR); + write_mos_reg(serial, port_number, IER, 0x0c); + + response = usb_submit_urb(port->read_urb, GFP_KERNEL); + if (response) + dev_err(&port->dev, "%s - Error %d submitting read urb\n", + __func__, response); + + /* initialize our port settings */ + mos7720_port->shadowMCR = UART_MCR_OUT2; /* Must set to enable ints! */ + + /* send a open port command */ + mos7720_port->open = 1; + + return 0; +} + +/* + * mos7720_chars_in_buffer + * this function is called by the tty driver when it wants to know how many + * bytes of data we currently have outstanding in the port (data that has + * been written, but hasn't made it out the port yet) + * If successful, we return the number of bytes left to be written in the + * system, + * Otherwise we return a negative error number. + */ +static int mos7720_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + int i; + int chars = 0; + struct moschip_port *mos7720_port; + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) + return 0; + + for (i = 0; i < NUM_URBS; ++i) { + if (mos7720_port->write_urb_pool[i] && + mos7720_port->write_urb_pool[i]->status == -EINPROGRESS) + chars += URB_TRANSFER_BUFFER_SIZE; + } + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); + return chars; +} + +static void mos7720_close(struct usb_serial_port *port) +{ + struct usb_serial *serial; + struct moschip_port *mos7720_port; + int j; + + serial = port->serial; + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) + return; + + for (j = 0; j < NUM_URBS; ++j) + usb_kill_urb(mos7720_port->write_urb_pool[j]); + + /* Freeing Write URBs */ + for (j = 0; j < NUM_URBS; ++j) { + if (mos7720_port->write_urb_pool[j]) { + kfree(mos7720_port->write_urb_pool[j]->transfer_buffer); + usb_free_urb(mos7720_port->write_urb_pool[j]); + } + } + + /* While closing port, shutdown all bulk read, write * + * and interrupt read if they exists, otherwise nop */ + usb_kill_urb(port->write_urb); + usb_kill_urb(port->read_urb); + + write_mos_reg(serial, port->port_number, MCR, 0x00); + write_mos_reg(serial, port->port_number, IER, 0x00); + + mos7720_port->open = 0; +} + +static void mos7720_break(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned char data; + struct usb_serial *serial; + struct moschip_port *mos7720_port; + + serial = port->serial; + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) + return; + + if (break_state == -1) + data = mos7720_port->shadowLCR | UART_LCR_SBC; + else + data = mos7720_port->shadowLCR & ~UART_LCR_SBC; + + mos7720_port->shadowLCR = data; + write_mos_reg(serial, port->port_number, LCR, mos7720_port->shadowLCR); +} + +/* + * mos7720_write_room + * this function is called by the tty driver when it wants to know how many + * bytes of data we can accept for a specific port. + * If successful, we return the amount of room that we have for this port + * Otherwise we return a negative error number. + */ +static int mos7720_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct moschip_port *mos7720_port; + int room = 0; + int i; + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) + return -ENODEV; + + /* FIXME: Locking */ + for (i = 0; i < NUM_URBS; ++i) { + if (mos7720_port->write_urb_pool[i] && + mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) + room += URB_TRANSFER_BUFFER_SIZE; + } + + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); + return room; +} + +static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *data, int count) +{ + int status; + int i; + int bytes_sent = 0; + int transfer_size; + + struct moschip_port *mos7720_port; + struct usb_serial *serial; + struct urb *urb; + const unsigned char *current_position = data; + + serial = port->serial; + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) + return -ENODEV; + + /* try to find a free urb in the list */ + urb = NULL; + + for (i = 0; i < NUM_URBS; ++i) { + if (mos7720_port->write_urb_pool[i] && + mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) { + urb = mos7720_port->write_urb_pool[i]; + dev_dbg(&port->dev, "URB:%d\n", i); + break; + } + } + + if (urb == NULL) { + dev_dbg(&port->dev, "%s - no more free urbs\n", __func__); + goto exit; + } + + if (urb->transfer_buffer == NULL) { + urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, + GFP_KERNEL); + if (!urb->transfer_buffer) + goto exit; + } + transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE); + + memcpy(urb->transfer_buffer, current_position, transfer_size); + usb_serial_debug_data(&port->dev, __func__, transfer_size, + urb->transfer_buffer); + + /* fill urb with data and submit */ + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, + port->bulk_out_endpointAddress), + urb->transfer_buffer, transfer_size, + mos7720_bulk_out_data_callback, mos7720_port); + + /* send it down the pipe */ + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status) { + dev_err_console(port, "%s - usb_submit_urb(write bulk) failed " + "with status = %d\n", __func__, status); + bytes_sent = status; + goto exit; + } + bytes_sent = transfer_size; + +exit: + return bytes_sent; +} + +static void mos7720_throttle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct moschip_port *mos7720_port; + int status; + + mos7720_port = usb_get_serial_port_data(port); + + if (mos7720_port == NULL) + return; + + if (!mos7720_port->open) { + dev_dbg(&port->dev, "%s - port not opened\n", __func__); + return; + } + + /* if we are implementing XON/XOFF, send the stop character */ + if (I_IXOFF(tty)) { + unsigned char stop_char = STOP_CHAR(tty); + status = mos7720_write(tty, port, &stop_char, 1); + if (status <= 0) + return; + } + + /* if we are implementing RTS/CTS, toggle that line */ + if (tty->termios.c_cflag & CRTSCTS) { + mos7720_port->shadowMCR &= ~UART_MCR_RTS; + write_mos_reg(port->serial, port->port_number, MCR, + mos7720_port->shadowMCR); + } +} + +static void mos7720_unthrottle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct moschip_port *mos7720_port = usb_get_serial_port_data(port); + int status; + + if (mos7720_port == NULL) + return; + + if (!mos7720_port->open) { + dev_dbg(&port->dev, "%s - port not opened\n", __func__); + return; + } + + /* if we are implementing XON/XOFF, send the start character */ + if (I_IXOFF(tty)) { + unsigned char start_char = START_CHAR(tty); + status = mos7720_write(tty, port, &start_char, 1); + if (status <= 0) + return; + } + + /* if we are implementing RTS/CTS, toggle that line */ + if (tty->termios.c_cflag & CRTSCTS) { + mos7720_port->shadowMCR |= UART_MCR_RTS; + write_mos_reg(port->serial, port->port_number, MCR, + mos7720_port->shadowMCR); + } +} + +/* FIXME: this function does not work */ +static int set_higher_rates(struct moschip_port *mos7720_port, + unsigned int baud) +{ + struct usb_serial_port *port; + struct usb_serial *serial; + int port_number; + enum mos_regs sp_reg; + if (mos7720_port == NULL) + return -EINVAL; + + port = mos7720_port->port; + serial = port->serial; + + /*********************************************** + * Init Sequence for higher rates + ***********************************************/ + dev_dbg(&port->dev, "Sending Setting Commands ..........\n"); + port_number = port->port_number; + + write_mos_reg(serial, port_number, IER, 0x00); + write_mos_reg(serial, port_number, FCR, 0x00); + write_mos_reg(serial, port_number, FCR, 0xcf); + mos7720_port->shadowMCR = 0x0b; + write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR); + write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x00); + + /*********************************************** + * Set for higher rates * + ***********************************************/ + /* writing baud rate verbatum into uart clock field clearly not right */ + if (port_number == 0) + sp_reg = SP1_REG; + else + sp_reg = SP2_REG; + write_mos_reg(serial, dummy, sp_reg, baud * 0x10); + write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x03); + mos7720_port->shadowMCR = 0x2b; + write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR); + + /*********************************************** + * Set DLL/DLM + ***********************************************/ + mos7720_port->shadowLCR = mos7720_port->shadowLCR | UART_LCR_DLAB; + write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR); + write_mos_reg(serial, port_number, DLL, 0x01); + write_mos_reg(serial, port_number, DLM, 0x00); + mos7720_port->shadowLCR = mos7720_port->shadowLCR & ~UART_LCR_DLAB; + write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR); + + return 0; +} + +/* baud rate information */ +struct divisor_table_entry { + __u32 baudrate; + __u16 divisor; +}; + +/* Define table of divisors for moschip 7720 hardware * + * These assume a 3.6864MHz crystal, the standard /16, and * + * MCR.7 = 0. */ +static struct divisor_table_entry divisor_table[] = { + { 50, 2304}, + { 110, 1047}, /* 2094.545455 => 230450 => .0217 % over */ + { 134, 857}, /* 1713.011152 => 230398.5 => .00065% under */ + { 150, 768}, + { 300, 384}, + { 600, 192}, + { 1200, 96}, + { 1800, 64}, + { 2400, 48}, + { 4800, 24}, + { 7200, 16}, + { 9600, 12}, + { 19200, 6}, + { 38400, 3}, + { 57600, 2}, + { 115200, 1}, +}; + +/***************************************************************************** + * calc_baud_rate_divisor + * this function calculates the proper baud rate divisor for the specified + * baud rate. + *****************************************************************************/ +static int calc_baud_rate_divisor(struct usb_serial_port *port, int baudrate, int *divisor) +{ + int i; + __u16 custom; + __u16 round1; + __u16 round; + + + dev_dbg(&port->dev, "%s - %d\n", __func__, baudrate); + + for (i = 0; i < ARRAY_SIZE(divisor_table); i++) { + if (divisor_table[i].baudrate == baudrate) { + *divisor = divisor_table[i].divisor; + return 0; + } + } + + /* After trying for all the standard baud rates * + * Try calculating the divisor for this baud rate */ + if (baudrate > 75 && baudrate < 230400) { + /* get the divisor */ + custom = (__u16)(230400L / baudrate); + + /* Check for round off */ + round1 = (__u16)(2304000L / baudrate); + round = (__u16)(round1 - (custom * 10)); + if (round > 4) + custom++; + *divisor = custom; + + dev_dbg(&port->dev, "Baud %d = %d\n", baudrate, custom); + return 0; + } + + dev_dbg(&port->dev, "Baud calculation Failed...\n"); + return -EINVAL; +} + +/* + * send_cmd_write_baud_rate + * this function sends the proper command to change the baud rate of the + * specified port. + */ +static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port, + int baudrate) +{ + struct usb_serial_port *port; + struct usb_serial *serial; + int divisor; + int status; + unsigned char number; + + if (mos7720_port == NULL) + return -1; + + port = mos7720_port->port; + serial = port->serial; + + number = port->port_number; + dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudrate); + + /* Calculate the Divisor */ + status = calc_baud_rate_divisor(port, baudrate, &divisor); + if (status) { + dev_err(&port->dev, "%s - bad baud rate\n", __func__); + return status; + } + + /* Enable access to divisor latch */ + mos7720_port->shadowLCR = mos7720_port->shadowLCR | UART_LCR_DLAB; + write_mos_reg(serial, number, LCR, mos7720_port->shadowLCR); + + /* Write the divisor */ + write_mos_reg(serial, number, DLL, (__u8)(divisor & 0xff)); + write_mos_reg(serial, number, DLM, (__u8)((divisor & 0xff00) >> 8)); + + /* Disable access to divisor latch */ + mos7720_port->shadowLCR = mos7720_port->shadowLCR & ~UART_LCR_DLAB; + write_mos_reg(serial, number, LCR, mos7720_port->shadowLCR); + + return status; +} + +/* + * change_port_settings + * This routine is called to set the UART on the device to match + * the specified new settings. + */ +static void change_port_settings(struct tty_struct *tty, + struct moschip_port *mos7720_port, + struct ktermios *old_termios) +{ + struct usb_serial_port *port; + struct usb_serial *serial; + int baud; + unsigned cflag; + unsigned iflag; + __u8 mask = 0xff; + __u8 lData; + __u8 lParity; + __u8 lStop; + int status; + int port_number; + + if (mos7720_port == NULL) + return ; + + port = mos7720_port->port; + serial = port->serial; + port_number = port->port_number; + + if (!mos7720_port->open) { + dev_dbg(&port->dev, "%s - port not opened\n", __func__); + return; + } + + lData = UART_LCR_WLEN8; + lStop = 0x00; /* 1 stop bit */ + lParity = 0x00; /* No parity */ + + cflag = tty->termios.c_cflag; + iflag = tty->termios.c_iflag; + + /* Change the number of bits */ + switch (cflag & CSIZE) { + case CS5: + lData = UART_LCR_WLEN5; + mask = 0x1f; + break; + + case CS6: + lData = UART_LCR_WLEN6; + mask = 0x3f; + break; + + case CS7: + lData = UART_LCR_WLEN7; + mask = 0x7f; + break; + default: + case CS8: + lData = UART_LCR_WLEN8; + break; + } + + /* Change the Parity bit */ + if (cflag & PARENB) { + if (cflag & PARODD) { + lParity = UART_LCR_PARITY; + dev_dbg(&port->dev, "%s - parity = odd\n", __func__); + } else { + lParity = (UART_LCR_EPAR | UART_LCR_PARITY); + dev_dbg(&port->dev, "%s - parity = even\n", __func__); + } + + } else { + dev_dbg(&port->dev, "%s - parity = none\n", __func__); + } + + if (cflag & CMSPAR) + lParity = lParity | 0x20; + + /* Change the Stop bit */ + if (cflag & CSTOPB) { + lStop = UART_LCR_STOP; + dev_dbg(&port->dev, "%s - stop bits = 2\n", __func__); + } else { + lStop = 0x00; + dev_dbg(&port->dev, "%s - stop bits = 1\n", __func__); + } + +#define LCR_BITS_MASK 0x03 /* Mask for bits/char field */ +#define LCR_STOP_MASK 0x04 /* Mask for stop bits field */ +#define LCR_PAR_MASK 0x38 /* Mask for parity field */ + + /* Update the LCR with the correct value */ + mos7720_port->shadowLCR &= + ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); + mos7720_port->shadowLCR |= (lData | lParity | lStop); + + + /* Disable Interrupts */ + write_mos_reg(serial, port_number, IER, 0x00); + write_mos_reg(serial, port_number, FCR, 0x00); + write_mos_reg(serial, port_number, FCR, 0xcf); + + /* Send the updated LCR value to the mos7720 */ + write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR); + mos7720_port->shadowMCR = 0x0b; + write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR); + + /* set up the MCR register and send it to the mos7720 */ + mos7720_port->shadowMCR = UART_MCR_OUT2; + if (cflag & CBAUD) + mos7720_port->shadowMCR |= (UART_MCR_DTR | UART_MCR_RTS); + + if (cflag & CRTSCTS) { + mos7720_port->shadowMCR |= (UART_MCR_XONANY); + /* To set hardware flow control to the specified * + * serial port, in SP1/2_CONTROL_REG */ + if (port_number) + write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01); + else + write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02); + + } else + mos7720_port->shadowMCR &= ~(UART_MCR_XONANY); + + write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR); + + /* Determine divisor based on baud rate */ + baud = tty_get_baud_rate(tty); + if (!baud) { + /* pick a default, any default... */ + dev_dbg(&port->dev, "Picked default baud...\n"); + baud = 9600; + } + + if (baud >= 230400) { + set_higher_rates(mos7720_port, baud); + /* Enable Interrupts */ + write_mos_reg(serial, port_number, IER, 0x0c); + return; + } + + dev_dbg(&port->dev, "%s - baud rate = %d\n", __func__, baud); + status = send_cmd_write_baud_rate(mos7720_port, baud); + /* FIXME: needs to write actual resulting baud back not just + blindly do so */ + if (cflag & CBAUD) + tty_encode_baud_rate(tty, baud, baud); + /* Enable Interrupts */ + write_mos_reg(serial, port_number, IER, 0x0c); + + if (port->read_urb->status != -EINPROGRESS) { + status = usb_submit_urb(port->read_urb, GFP_KERNEL); + if (status) + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", status); + } +} + +/* + * mos7720_set_termios + * this function is called by the tty driver when it wants to change the + * termios structure. + */ +static void mos7720_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + int status; + unsigned int cflag; + struct usb_serial *serial; + struct moschip_port *mos7720_port; + + serial = port->serial; + + mos7720_port = usb_get_serial_port_data(port); + + if (mos7720_port == NULL) + return; + + if (!mos7720_port->open) { + dev_dbg(&port->dev, "%s - port not opened\n", __func__); + return; + } + + dev_dbg(&port->dev, "setting termios - ASPIRE\n"); + + cflag = tty->termios.c_cflag; + + dev_dbg(&port->dev, "%s - cflag %08x iflag %08x\n", __func__, + tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag)); + + dev_dbg(&port->dev, "%s - old cflag %08x old iflag %08x\n", __func__, + old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); + + /* change the port settings to the new ones specified */ + change_port_settings(tty, mos7720_port, old_termios); + + if (port->read_urb->status != -EINPROGRESS) { + status = usb_submit_urb(port->read_urb, GFP_KERNEL); + if (status) + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", status); + } +} + +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int get_lsr_info(struct tty_struct *tty, + struct moschip_port *mos7720_port, unsigned int __user *value) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned int result = 0; + unsigned char data = 0; + int port_number = port->port_number; + int count; + + count = mos7720_chars_in_buffer(tty); + if (count == 0) { + read_mos_reg(port->serial, port_number, LSR, &data); + if ((data & (UART_LSR_TEMT | UART_LSR_THRE)) + == (UART_LSR_TEMT | UART_LSR_THRE)) { + dev_dbg(&port->dev, "%s -- Empty\n", __func__); + result = TIOCSER_TEMT; + } + } + if (copy_to_user(value, &result, sizeof(int))) + return -EFAULT; + return 0; +} + +static int mos7720_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct moschip_port *mos7720_port = usb_get_serial_port_data(port); + unsigned int result = 0; + unsigned int mcr ; + unsigned int msr ; + + mcr = mos7720_port->shadowMCR; + msr = mos7720_port->shadowMSR; + + result = ((mcr & UART_MCR_DTR) ? TIOCM_DTR : 0) /* 0x002 */ + | ((mcr & UART_MCR_RTS) ? TIOCM_RTS : 0) /* 0x004 */ + | ((msr & UART_MSR_CTS) ? TIOCM_CTS : 0) /* 0x020 */ + | ((msr & UART_MSR_DCD) ? TIOCM_CAR : 0) /* 0x040 */ + | ((msr & UART_MSR_RI) ? TIOCM_RI : 0) /* 0x080 */ + | ((msr & UART_MSR_DSR) ? TIOCM_DSR : 0); /* 0x100 */ + + return result; +} + +static int mos7720_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct moschip_port *mos7720_port = usb_get_serial_port_data(port); + unsigned int mcr ; + + mcr = mos7720_port->shadowMCR; + + if (set & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (set & TIOCM_DTR) + mcr |= UART_MCR_DTR; + if (set & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + + if (clear & TIOCM_RTS) + mcr &= ~UART_MCR_RTS; + if (clear & TIOCM_DTR) + mcr &= ~UART_MCR_DTR; + if (clear & TIOCM_LOOP) + mcr &= ~UART_MCR_LOOP; + + mos7720_port->shadowMCR = mcr; + write_mos_reg(port->serial, port->port_number, MCR, + mos7720_port->shadowMCR); + + return 0; +} + +static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd, + unsigned int __user *value) +{ + unsigned int mcr; + unsigned int arg; + + struct usb_serial_port *port; + + if (mos7720_port == NULL) + return -1; + + port = (struct usb_serial_port *)mos7720_port->port; + mcr = mos7720_port->shadowMCR; + + if (copy_from_user(&arg, value, sizeof(int))) + return -EFAULT; + + switch (cmd) { + case TIOCMBIS: + if (arg & TIOCM_RTS) + mcr |= UART_MCR_RTS; + if (arg & TIOCM_DTR) + mcr |= UART_MCR_RTS; + if (arg & TIOCM_LOOP) + mcr |= UART_MCR_LOOP; + break; + + case TIOCMBIC: + if (arg & TIOCM_RTS) + mcr &= ~UART_MCR_RTS; + if (arg & TIOCM_DTR) + mcr &= ~UART_MCR_RTS; + if (arg & TIOCM_LOOP) + mcr &= ~UART_MCR_LOOP; + break; + + } + + mos7720_port->shadowMCR = mcr; + write_mos_reg(port->serial, port->port_number, MCR, + mos7720_port->shadowMCR); + + return 0; +} + +static int get_serial_info(struct moschip_port *mos7720_port, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp; + + if (!retinfo) + return -EFAULT; + + memset(&tmp, 0, sizeof(tmp)); + + tmp.type = PORT_16550A; + tmp.line = mos7720_port->port->minor; + tmp.port = mos7720_port->port->port_number; + tmp.irq = 0; + tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; + tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; + tmp.baud_base = 9600; + tmp.close_delay = 5*HZ; + tmp.closing_wait = 30*HZ; + + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int mos7720_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + struct moschip_port *mos7720_port; + + mos7720_port = usb_get_serial_port_data(port); + if (mos7720_port == NULL) + return -ENODEV; + + switch (cmd) { + case TIOCSERGETLSR: + dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__); + return get_lsr_info(tty, mos7720_port, + (unsigned int __user *)arg); + + /* FIXME: These should be using the mode methods */ + case TIOCMBIS: + case TIOCMBIC: + dev_dbg(&port->dev, "%s TIOCMSET/TIOCMBIC/TIOCMSET\n", __func__); + return set_modem_info(mos7720_port, cmd, + (unsigned int __user *)arg); + + case TIOCGSERIAL: + dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__); + return get_serial_info(mos7720_port, + (struct serial_struct __user *)arg); + } + + return -ENOIOCTLCMD; +} + +static int mos7720_startup(struct usb_serial *serial) +{ + struct usb_device *dev; + char data; + u16 product; + int ret_val; + + product = le16_to_cpu(serial->dev->descriptor.idProduct); + dev = serial->dev; + + /* + * The 7715 uses the first bulk in/out endpoint pair for the parallel + * port, and the second for the serial port. Because the usbserial core + * assumes both pairs are serial ports, we must engage in a bit of + * subterfuge and swap the pointers for ports 0 and 1 in order to make + * port 0 point to the serial port. However, both moschip devices use a + * single interrupt-in endpoint for both ports (as mentioned a little + * further down), and this endpoint was assigned to port 0. So after + * the swap, we must copy the interrupt endpoint elements from port 1 + * (as newly assigned) to port 0, and null out port 1 pointers. + */ + if (product == MOSCHIP_DEVICE_ID_7715) { + struct usb_serial_port *tmp = serial->port[0]; + serial->port[0] = serial->port[1]; + serial->port[1] = tmp; + serial->port[0]->interrupt_in_urb = tmp->interrupt_in_urb; + serial->port[0]->interrupt_in_buffer = tmp->interrupt_in_buffer; + serial->port[0]->interrupt_in_endpointAddress = + tmp->interrupt_in_endpointAddress; + serial->port[1]->interrupt_in_urb = NULL; + serial->port[1]->interrupt_in_buffer = NULL; + } + + /* setting configuration feature to one */ + usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000); + + /* start the interrupt urb */ + ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); + if (ret_val) + dev_err(&dev->dev, + "%s - Error %d submitting control urb\n", + __func__, ret_val); + +#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT + if (product == MOSCHIP_DEVICE_ID_7715) { + ret_val = mos7715_parport_init(serial); + if (ret_val < 0) + return ret_val; + } +#endif + /* LSR For Port 1 */ + read_mos_reg(serial, 0, LSR, &data); + dev_dbg(&dev->dev, "LSR:%x\n", data); + + return 0; +} + +static void mos7720_release(struct usb_serial *serial) +{ +#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT + /* close the parallel port */ + + if (le16_to_cpu(serial->dev->descriptor.idProduct) + == MOSCHIP_DEVICE_ID_7715) { + struct urbtracker *urbtrack; + unsigned long flags; + struct mos7715_parport *mos_parport = + usb_get_serial_data(serial); + + /* prevent NULL ptr dereference in port callbacks */ + spin_lock(&release_lock); + mos_parport->pp->private_data = NULL; + spin_unlock(&release_lock); + + /* wait for synchronous usb calls to return */ + if (mos_parport->msg_pending) + wait_for_completion_timeout(&mos_parport->syncmsg_compl, + msecs_to_jiffies(MOS_WDR_TIMEOUT)); + + parport_remove_port(mos_parport->pp); + usb_set_serial_data(serial, NULL); + mos_parport->serial = NULL; + + /* if tasklet currently scheduled, wait for it to complete */ + tasklet_kill(&mos_parport->urb_tasklet); + + /* unlink any urbs sent by the tasklet */ + spin_lock_irqsave(&mos_parport->listlock, flags); + list_for_each_entry(urbtrack, + &mos_parport->active_urbs, + urblist_entry) + usb_unlink_urb(urbtrack->urb); + spin_unlock_irqrestore(&mos_parport->listlock, flags); + + kref_put(&mos_parport->ref_count, destroy_mos_parport); + } +#endif +} + +static int mos7720_port_probe(struct usb_serial_port *port) +{ + struct moschip_port *mos7720_port; + + mos7720_port = kzalloc(sizeof(*mos7720_port), GFP_KERNEL); + if (!mos7720_port) + return -ENOMEM; + + /* Initialize all port interrupt end point to port 0 int endpoint. + * Our device has only one interrupt endpoint common to all ports. + */ + port->interrupt_in_endpointAddress = + port->serial->port[0]->interrupt_in_endpointAddress; + mos7720_port->port = port; + + usb_set_serial_port_data(port, mos7720_port); + + return 0; +} + +static int mos7720_port_remove(struct usb_serial_port *port) +{ + struct moschip_port *mos7720_port; + + mos7720_port = usb_get_serial_port_data(port); + kfree(mos7720_port); + + return 0; +} + +static struct usb_serial_driver moschip7720_2port_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "moschip7720", + }, + .description = "Moschip 2 port adapter", + .id_table = id_table, + .calc_num_ports = mos77xx_calc_num_ports, + .open = mos7720_open, + .close = mos7720_close, + .throttle = mos7720_throttle, + .unthrottle = mos7720_unthrottle, + .probe = mos77xx_probe, + .attach = mos7720_startup, + .release = mos7720_release, + .port_probe = mos7720_port_probe, + .port_remove = mos7720_port_remove, + .ioctl = mos7720_ioctl, + .tiocmget = mos7720_tiocmget, + .tiocmset = mos7720_tiocmset, + .set_termios = mos7720_set_termios, + .write = mos7720_write, + .write_room = mos7720_write_room, + .chars_in_buffer = mos7720_chars_in_buffer, + .break_ctl = mos7720_break, + .read_bulk_callback = mos7720_bulk_in_callback, + .read_int_callback = NULL /* dynamically assigned in probe() */ +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &moschip7720_2port_driver, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/mos7840.c b/kernel/drivers/usb/serial/mos7840.c new file mode 100644 index 000000000..e4473a910 --- /dev/null +++ b/kernel/drivers/usb/serial/mos7840.c @@ -0,0 +1,2410 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Clean ups from Moschip version and a few ioctl implementations by: + * Paul B Schroeder <pschroeder "at" uplogix "dot" com> + * + * Originally based on drivers/usb/serial/io_edgeport.c which is: + * Copyright (C) 2000 Inside Out Networks, All rights reserved. + * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com> + * + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/serial.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/uaccess.h> + +#define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver" + +/* + * 16C50 UART register defines + */ + +#define LCR_BITS_5 0x00 /* 5 bits/char */ +#define LCR_BITS_6 0x01 /* 6 bits/char */ +#define LCR_BITS_7 0x02 /* 7 bits/char */ +#define LCR_BITS_8 0x03 /* 8 bits/char */ +#define LCR_BITS_MASK 0x03 /* Mask for bits/char field */ + +#define LCR_STOP_1 0x00 /* 1 stop bit */ +#define LCR_STOP_1_5 0x04 /* 1.5 stop bits (if 5 bits/char) */ +#define LCR_STOP_2 0x04 /* 2 stop bits (if 6-8 bits/char) */ +#define LCR_STOP_MASK 0x04 /* Mask for stop bits field */ + +#define LCR_PAR_NONE 0x00 /* No parity */ +#define LCR_PAR_ODD 0x08 /* Odd parity */ +#define LCR_PAR_EVEN 0x18 /* Even parity */ +#define LCR_PAR_MARK 0x28 /* Force parity bit to 1 */ +#define LCR_PAR_SPACE 0x38 /* Force parity bit to 0 */ +#define LCR_PAR_MASK 0x38 /* Mask for parity field */ + +#define LCR_SET_BREAK 0x40 /* Set Break condition */ +#define LCR_DL_ENABLE 0x80 /* Enable access to divisor latch */ + +#define MCR_DTR 0x01 /* Assert DTR */ +#define MCR_RTS 0x02 /* Assert RTS */ +#define MCR_OUT1 0x04 /* Loopback only: Sets state of RI */ +#define MCR_MASTER_IE 0x08 /* Enable interrupt outputs */ +#define MCR_LOOPBACK 0x10 /* Set internal (digital) loopback mode */ +#define MCR_XON_ANY 0x20 /* Enable any char to exit XOFF mode */ + +#define MOS7840_MSR_CTS 0x10 /* Current state of CTS */ +#define MOS7840_MSR_DSR 0x20 /* Current state of DSR */ +#define MOS7840_MSR_RI 0x40 /* Current state of RI */ +#define MOS7840_MSR_CD 0x80 /* Current state of CD */ + +/* + * Defines used for sending commands to port + */ + +#define MOS_WDR_TIMEOUT 5000 /* default urb timeout */ + +#define MOS_PORT1 0x0200 +#define MOS_PORT2 0x0300 +#define MOS_VENREG 0x0000 +#define MOS_MAX_PORT 0x02 +#define MOS_WRITE 0x0E +#define MOS_READ 0x0D + +/* Requests */ +#define MCS_RD_RTYPE 0xC0 +#define MCS_WR_RTYPE 0x40 +#define MCS_RDREQ 0x0D +#define MCS_WRREQ 0x0E +#define MCS_CTRL_TIMEOUT 500 +#define VENDOR_READ_LENGTH (0x01) + +#define MAX_NAME_LEN 64 + +#define ZLP_REG1 0x3A /* Zero_Flag_Reg1 58 */ +#define ZLP_REG5 0x3E /* Zero_Flag_Reg5 62 */ + +/* For higher baud Rates use TIOCEXBAUD */ +#define TIOCEXBAUD 0x5462 + +/* vendor id and device id defines */ + +/* The native mos7840/7820 component */ +#define USB_VENDOR_ID_MOSCHIP 0x9710 +#define MOSCHIP_DEVICE_ID_7840 0x7840 +#define MOSCHIP_DEVICE_ID_7820 0x7820 +#define MOSCHIP_DEVICE_ID_7810 0x7810 +/* The native component can have its vendor/device id's overridden + * in vendor-specific implementations. Such devices can be handled + * by making a change here, in id_table. + */ +#define USB_VENDOR_ID_BANDB 0x0856 +#define BANDB_DEVICE_ID_USO9ML2_2 0xAC22 +#define BANDB_DEVICE_ID_USO9ML2_2P 0xBC00 +#define BANDB_DEVICE_ID_USO9ML2_4 0xAC24 +#define BANDB_DEVICE_ID_USO9ML2_4P 0xBC01 +#define BANDB_DEVICE_ID_US9ML2_2 0xAC29 +#define BANDB_DEVICE_ID_US9ML2_4 0xAC30 +#define BANDB_DEVICE_ID_USPTL4_2 0xAC31 +#define BANDB_DEVICE_ID_USPTL4_4 0xAC32 +#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42 +#define BANDB_DEVICE_ID_USOPTL4_2P 0xBC02 +#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44 +#define BANDB_DEVICE_ID_USOPTL4_4P 0xBC03 +#define BANDB_DEVICE_ID_USOPTL2_4 0xAC24 + +/* This driver also supports + * ATEN UC2324 device using Moschip MCS7840 + * ATEN UC2322 device using Moschip MCS7820 + */ +#define USB_VENDOR_ID_ATENINTL 0x0557 +#define ATENINTL_DEVICE_ID_UC2324 0x2011 +#define ATENINTL_DEVICE_ID_UC2322 0x7820 + +/* Interrupt Routine Defines */ + +#define SERIAL_IIR_RLS 0x06 +#define SERIAL_IIR_MS 0x00 + +/* + * Emulation of the bit mask on the LINE STATUS REGISTER. + */ +#define SERIAL_LSR_DR 0x0001 +#define SERIAL_LSR_OE 0x0002 +#define SERIAL_LSR_PE 0x0004 +#define SERIAL_LSR_FE 0x0008 +#define SERIAL_LSR_BI 0x0010 + +#define MOS_MSR_DELTA_CTS 0x10 +#define MOS_MSR_DELTA_DSR 0x20 +#define MOS_MSR_DELTA_RI 0x40 +#define MOS_MSR_DELTA_CD 0x80 + +/* Serial Port register Address */ +#define INTERRUPT_ENABLE_REGISTER ((__u16)(0x01)) +#define FIFO_CONTROL_REGISTER ((__u16)(0x02)) +#define LINE_CONTROL_REGISTER ((__u16)(0x03)) +#define MODEM_CONTROL_REGISTER ((__u16)(0x04)) +#define LINE_STATUS_REGISTER ((__u16)(0x05)) +#define MODEM_STATUS_REGISTER ((__u16)(0x06)) +#define SCRATCH_PAD_REGISTER ((__u16)(0x07)) +#define DIVISOR_LATCH_LSB ((__u16)(0x00)) +#define DIVISOR_LATCH_MSB ((__u16)(0x01)) + +#define CLK_MULTI_REGISTER ((__u16)(0x02)) +#define CLK_START_VALUE_REGISTER ((__u16)(0x03)) +#define GPIO_REGISTER ((__u16)(0x07)) + +#define SERIAL_LCR_DLAB ((__u16)(0x0080)) + +/* + * URB POOL related defines + */ +#define NUM_URBS 16 /* URB Count */ +#define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */ + +/* LED on/off milliseconds*/ +#define LED_ON_MS 500 +#define LED_OFF_MS 500 + +enum mos7840_flag { + MOS7840_FLAG_CTRL_BUSY, + MOS7840_FLAG_LED_BUSY, +}; + +static const struct usb_device_id id_table[] = { + {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, + {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, + {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2P)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4P)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_2)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_4)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_2)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2P)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4P)}, + {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)}, + {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, + {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)}, + {} /* terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* This structure holds all of the local port information */ + +struct moschip_port { + int port_num; /*Actual port number in the device(1,2,etc) */ + struct urb *write_urb; /* write URB for this port */ + struct urb *read_urb; /* read URB for this port */ + __u8 shadowLCR; /* last LCR value received */ + __u8 shadowMCR; /* last MCR value received */ + char open; + char open_ports; + struct usb_serial_port *port; /* loop back to the owner of this object */ + + /* Offsets */ + __u8 SpRegOffset; + __u8 ControlRegOffset; + __u8 DcrRegOffset; + /* for processing control URBS in interrupt context */ + struct urb *control_urb; + struct usb_ctrlrequest *dr; + char *ctrl_buf; + int MsrLsr; + + spinlock_t pool_lock; + struct urb *write_urb_pool[NUM_URBS]; + char busy[NUM_URBS]; + bool read_urb_busy; + + /* For device(s) with LED indicator */ + bool has_led; + struct timer_list led_timer1; /* Timer for LED on */ + struct timer_list led_timer2; /* Timer for LED off */ + struct urb *led_urb; + struct usb_ctrlrequest *led_dr; + + unsigned long flags; +}; + +/* + * mos7840_set_reg_sync + * To set the Control register by calling usb_fill_control_urb function + * by passing usb_sndctrlpipe function as parameter. + */ + +static int mos7840_set_reg_sync(struct usb_serial_port *port, __u16 reg, + __u16 val) +{ + struct usb_device *dev = port->serial->dev; + val = val & 0x00ff; + dev_dbg(&port->dev, "mos7840_set_reg_sync offset is %x, value %x\n", reg, val); + + return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, + MCS_WR_RTYPE, val, reg, NULL, 0, + MOS_WDR_TIMEOUT); +} + +/* + * mos7840_get_reg_sync + * To set the Uart register by calling usb_fill_control_urb function by + * passing usb_rcvctrlpipe function as parameter. + */ + +static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg, + __u16 *val) +{ + struct usb_device *dev = port->serial->dev; + int ret = 0; + u8 *buf; + + buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, + MCS_RD_RTYPE, 0, reg, buf, VENDOR_READ_LENGTH, + MOS_WDR_TIMEOUT); + *val = buf[0]; + dev_dbg(&port->dev, "%s offset is %x, return val %x\n", __func__, reg, *val); + + kfree(buf); + return ret; +} + +/* + * mos7840_set_uart_reg + * To set the Uart register by calling usb_fill_control_urb function by + * passing usb_sndctrlpipe function as parameter. + */ + +static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg, + __u16 val) +{ + + struct usb_device *dev = port->serial->dev; + val = val & 0x00ff; + /* For the UART control registers, the application number need + to be Or'ed */ + if (port->serial->num_ports == 4) { + val |= ((__u16)port->port_number + 1) << 8; + } else { + if (port->port_number == 0) { + val |= ((__u16)port->port_number + 1) << 8; + } else { + val |= ((__u16)port->port_number + 2) << 8; + } + } + dev_dbg(&port->dev, "%s application number is %x\n", __func__, val); + return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, + MCS_WR_RTYPE, val, reg, NULL, 0, + MOS_WDR_TIMEOUT); + +} + +/* + * mos7840_get_uart_reg + * To set the Control register by calling usb_fill_control_urb function + * by passing usb_rcvctrlpipe function as parameter. + */ +static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, + __u16 *val) +{ + struct usb_device *dev = port->serial->dev; + int ret = 0; + __u16 Wval; + u8 *buf; + + buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + /* Wval is same as application number */ + if (port->serial->num_ports == 4) { + Wval = ((__u16)port->port_number + 1) << 8; + } else { + if (port->port_number == 0) { + Wval = ((__u16)port->port_number + 1) << 8; + } else { + Wval = ((__u16)port->port_number + 2) << 8; + } + } + dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval); + ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, + MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH, + MOS_WDR_TIMEOUT); + *val = buf[0]; + + kfree(buf); + return ret; +} + +static void mos7840_dump_serial_port(struct usb_serial_port *port, + struct moschip_port *mos7840_port) +{ + + dev_dbg(&port->dev, "SpRegOffset is %2x\n", mos7840_port->SpRegOffset); + dev_dbg(&port->dev, "ControlRegOffset is %2x\n", mos7840_port->ControlRegOffset); + dev_dbg(&port->dev, "DCRRegOffset is %2x\n", mos7840_port->DcrRegOffset); + +} + +/************************************************************************/ +/************************************************************************/ +/* I N T E R F A C E F U N C T I O N S */ +/* I N T E R F A C E F U N C T I O N S */ +/************************************************************************/ +/************************************************************************/ + +static inline void mos7840_set_port_private(struct usb_serial_port *port, + struct moschip_port *data) +{ + usb_set_serial_port_data(port, (void *)data); +} + +static inline struct moschip_port *mos7840_get_port_private(struct + usb_serial_port + *port) +{ + return (struct moschip_port *)usb_get_serial_port_data(port); +} + +static void mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr) +{ + struct moschip_port *mos7840_port; + struct async_icount *icount; + mos7840_port = port; + if (new_msr & + (MOS_MSR_DELTA_CTS | MOS_MSR_DELTA_DSR | MOS_MSR_DELTA_RI | + MOS_MSR_DELTA_CD)) { + icount = &mos7840_port->port->icount; + + /* update input line counters */ + if (new_msr & MOS_MSR_DELTA_CTS) + icount->cts++; + if (new_msr & MOS_MSR_DELTA_DSR) + icount->dsr++; + if (new_msr & MOS_MSR_DELTA_CD) + icount->dcd++; + if (new_msr & MOS_MSR_DELTA_RI) + icount->rng++; + + wake_up_interruptible(&port->port->port.delta_msr_wait); + } +} + +static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr) +{ + struct async_icount *icount; + + if (new_lsr & SERIAL_LSR_BI) { + /* + * Parity and Framing errors only count if they + * occur exclusive of a break being + * received. + */ + new_lsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI); + } + + /* update input line counters */ + icount = &port->port->icount; + if (new_lsr & SERIAL_LSR_BI) + icount->brk++; + if (new_lsr & SERIAL_LSR_OE) + icount->overrun++; + if (new_lsr & SERIAL_LSR_PE) + icount->parity++; + if (new_lsr & SERIAL_LSR_FE) + icount->frame++; +} + +/************************************************************************/ +/************************************************************************/ +/* U S B C A L L B A C K F U N C T I O N S */ +/* U S B C A L L B A C K F U N C T I O N S */ +/************************************************************************/ +/************************************************************************/ + +static void mos7840_control_callback(struct urb *urb) +{ + unsigned char *data; + struct moschip_port *mos7840_port; + struct device *dev = &urb->dev->dev; + __u8 regval = 0x0; + int status = urb->status; + + mos7840_port = urb->context; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); + goto out; + default: + dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); + goto out; + } + + dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length); + dev_dbg(dev, "%s mos7840_port->MsrLsr is %d port %d\n", __func__, + mos7840_port->MsrLsr, mos7840_port->port_num); + data = urb->transfer_buffer; + regval = (__u8) data[0]; + dev_dbg(dev, "%s data is %x\n", __func__, regval); + if (mos7840_port->MsrLsr == 0) + mos7840_handle_new_msr(mos7840_port, regval); + else if (mos7840_port->MsrLsr == 1) + mos7840_handle_new_lsr(mos7840_port, regval); +out: + clear_bit_unlock(MOS7840_FLAG_CTRL_BUSY, &mos7840_port->flags); +} + +static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg, + __u16 *val) +{ + struct usb_device *dev = mcs->port->serial->dev; + struct usb_ctrlrequest *dr = mcs->dr; + unsigned char *buffer = mcs->ctrl_buf; + int ret; + + if (test_and_set_bit_lock(MOS7840_FLAG_CTRL_BUSY, &mcs->flags)) + return -EBUSY; + + dr->bRequestType = MCS_RD_RTYPE; + dr->bRequest = MCS_RDREQ; + dr->wValue = cpu_to_le16(Wval); /* 0 */ + dr->wIndex = cpu_to_le16(reg); + dr->wLength = cpu_to_le16(2); + + usb_fill_control_urb(mcs->control_urb, dev, usb_rcvctrlpipe(dev, 0), + (unsigned char *)dr, buffer, 2, + mos7840_control_callback, mcs); + mcs->control_urb->transfer_buffer_length = 2; + ret = usb_submit_urb(mcs->control_urb, GFP_ATOMIC); + if (ret) + clear_bit_unlock(MOS7840_FLAG_CTRL_BUSY, &mcs->flags); + + return ret; +} + +static void mos7840_set_led_callback(struct urb *urb) +{ + switch (urb->status) { + case 0: + /* Success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* This urb is terminated, clean up */ + dev_dbg(&urb->dev->dev, "%s - urb shutting down: %d\n", + __func__, urb->status); + break; + default: + dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", + __func__, urb->status); + } +} + +static void mos7840_set_led_async(struct moschip_port *mcs, __u16 wval, + __u16 reg) +{ + struct usb_device *dev = mcs->port->serial->dev; + struct usb_ctrlrequest *dr = mcs->led_dr; + + dr->bRequestType = MCS_WR_RTYPE; + dr->bRequest = MCS_WRREQ; + dr->wValue = cpu_to_le16(wval); + dr->wIndex = cpu_to_le16(reg); + dr->wLength = cpu_to_le16(0); + + usb_fill_control_urb(mcs->led_urb, dev, usb_sndctrlpipe(dev, 0), + (unsigned char *)dr, NULL, 0, mos7840_set_led_callback, NULL); + + usb_submit_urb(mcs->led_urb, GFP_ATOMIC); +} + +static void mos7840_set_led_sync(struct usb_serial_port *port, __u16 reg, + __u16 val) +{ + struct usb_device *dev = port->serial->dev; + + usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, MCS_WR_RTYPE, + val, reg, NULL, 0, MOS_WDR_TIMEOUT); +} + +static void mos7840_led_off(unsigned long arg) +{ + struct moschip_port *mcs = (struct moschip_port *) arg; + + /* Turn off LED */ + mos7840_set_led_async(mcs, 0x0300, MODEM_CONTROL_REGISTER); + mod_timer(&mcs->led_timer2, + jiffies + msecs_to_jiffies(LED_OFF_MS)); +} + +static void mos7840_led_flag_off(unsigned long arg) +{ + struct moschip_port *mcs = (struct moschip_port *) arg; + + clear_bit_unlock(MOS7840_FLAG_LED_BUSY, &mcs->flags); +} + +static void mos7840_led_activity(struct usb_serial_port *port) +{ + struct moschip_port *mos7840_port = usb_get_serial_port_data(port); + + if (test_and_set_bit_lock(MOS7840_FLAG_LED_BUSY, &mos7840_port->flags)) + return; + + mos7840_set_led_async(mos7840_port, 0x0301, MODEM_CONTROL_REGISTER); + mod_timer(&mos7840_port->led_timer1, + jiffies + msecs_to_jiffies(LED_ON_MS)); +} + +/***************************************************************************** + * mos7840_interrupt_callback + * this is the callback function for when we have received data on the + * interrupt endpoint. + *****************************************************************************/ + +static void mos7840_interrupt_callback(struct urb *urb) +{ + int result; + int length; + struct moschip_port *mos7840_port; + struct usb_serial *serial; + __u16 Data; + unsigned char *data; + __u8 sp[5], st; + int i, rv = 0; + __u16 wval, wreg = 0; + int status = urb->status; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", + __func__, status); + goto exit; + } + + length = urb->actual_length; + data = urb->transfer_buffer; + + serial = urb->context; + + /* Moschip get 5 bytes + * Byte 1 IIR Port 1 (port.number is 0) + * Byte 2 IIR Port 2 (port.number is 1) + * Byte 3 IIR Port 3 (port.number is 2) + * Byte 4 IIR Port 4 (port.number is 3) + * Byte 5 FIFO status for both */ + + if (length && length > 5) { + dev_dbg(&urb->dev->dev, "%s", "Wrong data !!!\n"); + return; + } + + sp[0] = (__u8) data[0]; + sp[1] = (__u8) data[1]; + sp[2] = (__u8) data[2]; + sp[3] = (__u8) data[3]; + st = (__u8) data[4]; + + for (i = 0; i < serial->num_ports; i++) { + mos7840_port = mos7840_get_port_private(serial->port[i]); + wval = ((__u16)serial->port[i]->port_number + 1) << 8; + if (mos7840_port->open) { + if (sp[i] & 0x01) { + dev_dbg(&urb->dev->dev, "SP%d No Interrupt !!!\n", i); + } else { + switch (sp[i] & 0x0f) { + case SERIAL_IIR_RLS: + dev_dbg(&urb->dev->dev, "Serial Port %d: Receiver status error or \n", i); + dev_dbg(&urb->dev->dev, "address bit detected in 9-bit mode\n"); + mos7840_port->MsrLsr = 1; + wreg = LINE_STATUS_REGISTER; + break; + case SERIAL_IIR_MS: + dev_dbg(&urb->dev->dev, "Serial Port %d: Modem status change\n", i); + mos7840_port->MsrLsr = 0; + wreg = MODEM_STATUS_REGISTER; + break; + } + rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data); + } + } + } + if (!(rv < 0)) + /* the completion handler for the control urb will resubmit */ + return; +exit: + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) { + dev_err(&urb->dev->dev, + "%s - Error %d submitting interrupt urb\n", + __func__, result); + } +} + +static int mos7840_port_paranoia_check(struct usb_serial_port *port, + const char *function) +{ + if (!port) { + pr_debug("%s - port == NULL\n", function); + return -1; + } + if (!port->serial) { + pr_debug("%s - port->serial == NULL\n", function); + return -1; + } + + return 0; +} + +/* Inline functions to check the sanity of a pointer that is passed to us */ +static int mos7840_serial_paranoia_check(struct usb_serial *serial, + const char *function) +{ + if (!serial) { + pr_debug("%s - serial == NULL\n", function); + return -1; + } + if (!serial->type) { + pr_debug("%s - serial->type == NULL!\n", function); + return -1; + } + + return 0; +} + +static struct usb_serial *mos7840_get_usb_serial(struct usb_serial_port *port, + const char *function) +{ + /* if no port was specified, or it fails a paranoia check */ + if (!port || + mos7840_port_paranoia_check(port, function) || + mos7840_serial_paranoia_check(port->serial, function)) { + /* then say that we don't have a valid usb_serial thing, + * which will end up genrating -ENODEV return values */ + return NULL; + } + + return port->serial; +} + +/***************************************************************************** + * mos7840_bulk_in_callback + * this is the callback function for when we have received data on the + * bulk in endpoint. + *****************************************************************************/ + +static void mos7840_bulk_in_callback(struct urb *urb) +{ + int retval; + unsigned char *data; + struct usb_serial *serial; + struct usb_serial_port *port; + struct moschip_port *mos7840_port; + int status = urb->status; + + mos7840_port = urb->context; + if (!mos7840_port) + return; + + if (status) { + dev_dbg(&urb->dev->dev, "nonzero read bulk status received: %d\n", status); + mos7840_port->read_urb_busy = false; + return; + } + + port = mos7840_port->port; + if (mos7840_port_paranoia_check(port, __func__)) { + mos7840_port->read_urb_busy = false; + return; + } + + serial = mos7840_get_usb_serial(port, __func__); + if (!serial) { + mos7840_port->read_urb_busy = false; + return; + } + + data = urb->transfer_buffer; + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); + + if (urb->actual_length) { + struct tty_port *tport = &mos7840_port->port->port; + tty_insert_flip_string(tport, data, urb->actual_length); + tty_flip_buffer_push(tport); + port->icount.rx += urb->actual_length; + dev_dbg(&port->dev, "icount.rx is %d:\n", port->icount.rx); + } + + if (!mos7840_port->read_urb) { + dev_dbg(&port->dev, "%s", "URB KILLED !!!\n"); + mos7840_port->read_urb_busy = false; + return; + } + + if (mos7840_port->has_led) + mos7840_led_activity(port); + + mos7840_port->read_urb_busy = true; + retval = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); + + if (retval) { + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, retval = %d\n", retval); + mos7840_port->read_urb_busy = false; + } +} + +/***************************************************************************** + * mos7840_bulk_out_data_callback + * this is the callback function for when we have finished sending + * serial data on the bulk out endpoint. + *****************************************************************************/ + +static void mos7840_bulk_out_data_callback(struct urb *urb) +{ + struct moschip_port *mos7840_port; + struct usb_serial_port *port; + int status = urb->status; + int i; + + mos7840_port = urb->context; + port = mos7840_port->port; + spin_lock(&mos7840_port->pool_lock); + for (i = 0; i < NUM_URBS; i++) { + if (urb == mos7840_port->write_urb_pool[i]) { + mos7840_port->busy[i] = 0; + break; + } + } + spin_unlock(&mos7840_port->pool_lock); + + if (status) { + dev_dbg(&port->dev, "nonzero write bulk status received:%d\n", status); + return; + } + + if (mos7840_port_paranoia_check(port, __func__)) + return; + + if (mos7840_port->open) + tty_port_tty_wakeup(&port->port); + +} + +/************************************************************************/ +/* D R I V E R T T Y I N T E R F A C E F U N C T I O N S */ +/************************************************************************/ + +/***************************************************************************** + * mos7840_open + * this function is called by the tty driver when a port is opened + * If successful, we return 0 + * Otherwise we return a negative error number. + *****************************************************************************/ + +static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + int response; + int j; + struct usb_serial *serial; + struct urb *urb; + __u16 Data; + int status; + struct moschip_port *mos7840_port; + struct moschip_port *port0; + + if (mos7840_port_paranoia_check(port, __func__)) + return -ENODEV; + + serial = port->serial; + + if (mos7840_serial_paranoia_check(serial, __func__)) + return -ENODEV; + + mos7840_port = mos7840_get_port_private(port); + port0 = mos7840_get_port_private(serial->port[0]); + + if (mos7840_port == NULL || port0 == NULL) + return -ENODEV; + + usb_clear_halt(serial->dev, port->write_urb->pipe); + usb_clear_halt(serial->dev, port->read_urb->pipe); + port0->open_ports++; + + /* Initialising the write urb pool */ + for (j = 0; j < NUM_URBS; ++j) { + urb = usb_alloc_urb(0, GFP_KERNEL); + mos7840_port->write_urb_pool[j] = urb; + if (!urb) + continue; + + urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, + GFP_KERNEL); + if (!urb->transfer_buffer) { + usb_free_urb(urb); + mos7840_port->write_urb_pool[j] = NULL; + continue; + } + } + +/***************************************************************************** + * Initialize MCS7840 -- Write Init values to corresponding Registers + * + * Register Index + * 1 : IER + * 2 : FCR + * 3 : LCR + * 4 : MCR + * + * 0x08 : SP1/2 Control Reg + *****************************************************************************/ + + /* NEED to check the following Block */ + + Data = 0x0; + status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); + if (status < 0) { + dev_dbg(&port->dev, "Reading Spreg failed\n"); + goto err; + } + Data |= 0x80; + status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); + if (status < 0) { + dev_dbg(&port->dev, "writing Spreg failed\n"); + goto err; + } + + Data &= ~0x80; + status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); + if (status < 0) { + dev_dbg(&port->dev, "writing Spreg failed\n"); + goto err; + } + /* End of block to be checked */ + + Data = 0x0; + status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, + &Data); + if (status < 0) { + dev_dbg(&port->dev, "Reading Controlreg failed\n"); + goto err; + } + Data |= 0x08; /* Driver done bit */ + Data |= 0x20; /* rx_disable */ + status = mos7840_set_reg_sync(port, + mos7840_port->ControlRegOffset, Data); + if (status < 0) { + dev_dbg(&port->dev, "writing Controlreg failed\n"); + goto err; + } + /* do register settings here */ + /* Set all regs to the device default values. */ + /*********************************** + * First Disable all interrupts. + ***********************************/ + Data = 0x00; + status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); + if (status < 0) { + dev_dbg(&port->dev, "disabling interrupts failed\n"); + goto err; + } + /* Set FIFO_CONTROL_REGISTER to the default value */ + Data = 0x00; + status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n"); + goto err; + } + + Data = 0xcf; + status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n"); + goto err; + } + + Data = 0x03; + status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); + mos7840_port->shadowLCR = Data; + + Data = 0x0b; + status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); + mos7840_port->shadowMCR = Data; + + Data = 0x00; + status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); + mos7840_port->shadowLCR = Data; + + Data |= SERIAL_LCR_DLAB; /* data latch enable in LCR 0x80 */ + status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); + + Data = 0x0c; + status = mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data); + + Data = 0x0; + status = mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data); + + Data = 0x00; + status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); + + Data = Data & ~SERIAL_LCR_DLAB; + status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); + mos7840_port->shadowLCR = Data; + + /* clearing Bulkin and Bulkout Fifo */ + Data = 0x0; + status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); + + Data = Data | 0x0c; + status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); + + Data = Data & ~0x0c; + status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); + /* Finally enable all interrupts */ + Data = 0x0c; + status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); + + /* clearing rx_disable */ + Data = 0x0; + status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, + &Data); + Data = Data & ~0x20; + status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, + Data); + + /* rx_negate */ + Data = 0x0; + status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, + &Data); + Data = Data | 0x10; + status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, + Data); + + /* Check to see if we've set up our endpoint info yet * + * (can't set it up in mos7840_startup as the structures * + * were not set up at that time.) */ + if (port0->open_ports == 1) { + if (serial->port[0]->interrupt_in_buffer == NULL) { + /* set up interrupt urb */ + usb_fill_int_urb(serial->port[0]->interrupt_in_urb, + serial->dev, + usb_rcvintpipe(serial->dev, + serial->port[0]->interrupt_in_endpointAddress), + serial->port[0]->interrupt_in_buffer, + serial->port[0]->interrupt_in_urb-> + transfer_buffer_length, + mos7840_interrupt_callback, + serial, + serial->port[0]->interrupt_in_urb->interval); + + /* start interrupt read for mos7840 * + * will continue as long as mos7840 is connected */ + + response = + usb_submit_urb(serial->port[0]->interrupt_in_urb, + GFP_KERNEL); + if (response) { + dev_err(&port->dev, "%s - Error %d submitting " + "interrupt urb\n", __func__, response); + } + + } + + } + + /* see if we've set up our endpoint info yet * + * (can't set it up in mos7840_startup as the * + * structures were not set up at that time.) */ + + dev_dbg(&port->dev, "port number is %d\n", port->port_number); + dev_dbg(&port->dev, "minor number is %d\n", port->minor); + dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress); + dev_dbg(&port->dev, "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress); + dev_dbg(&port->dev, "Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress); + dev_dbg(&port->dev, "port's number in the device is %d\n", mos7840_port->port_num); + mos7840_port->read_urb = port->read_urb; + + /* set up our bulk in urb */ + if ((serial->num_ports == 2) && (((__u16)port->port_number % 2) != 0)) { + usb_fill_bulk_urb(mos7840_port->read_urb, + serial->dev, + usb_rcvbulkpipe(serial->dev, + (port->bulk_in_endpointAddress) + 2), + port->bulk_in_buffer, + mos7840_port->read_urb->transfer_buffer_length, + mos7840_bulk_in_callback, mos7840_port); + } else { + usb_fill_bulk_urb(mos7840_port->read_urb, + serial->dev, + usb_rcvbulkpipe(serial->dev, + port->bulk_in_endpointAddress), + port->bulk_in_buffer, + mos7840_port->read_urb->transfer_buffer_length, + mos7840_bulk_in_callback, mos7840_port); + } + + dev_dbg(&port->dev, "%s: bulkin endpoint is %d\n", __func__, port->bulk_in_endpointAddress); + mos7840_port->read_urb_busy = true; + response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL); + if (response) { + dev_err(&port->dev, "%s - Error %d submitting control urb\n", + __func__, response); + mos7840_port->read_urb_busy = false; + } + + /* initialize our port settings */ + /* Must set to enable ints! */ + mos7840_port->shadowMCR = MCR_MASTER_IE; + /* send a open port command */ + mos7840_port->open = 1; + /* mos7840_change_port_settings(mos7840_port,old_termios); */ + + return 0; +err: + for (j = 0; j < NUM_URBS; ++j) { + urb = mos7840_port->write_urb_pool[j]; + if (!urb) + continue; + kfree(urb->transfer_buffer); + usb_free_urb(urb); + } + return status; +} + +/***************************************************************************** + * mos7840_chars_in_buffer + * this function is called by the tty driver when it wants to know how many + * bytes of data we currently have outstanding in the port (data that has + * been written, but hasn't made it out the port yet) + * If successful, we return the number of bytes left to be written in the + * system, + * Otherwise we return zero. + *****************************************************************************/ + +static int mos7840_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + int i; + int chars = 0; + unsigned long flags; + struct moschip_port *mos7840_port; + + if (mos7840_port_paranoia_check(port, __func__)) + return 0; + + mos7840_port = mos7840_get_port_private(port); + if (mos7840_port == NULL) + return 0; + + spin_lock_irqsave(&mos7840_port->pool_lock, flags); + for (i = 0; i < NUM_URBS; ++i) { + if (mos7840_port->busy[i]) { + struct urb *urb = mos7840_port->write_urb_pool[i]; + chars += urb->transfer_buffer_length; + } + } + spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); + return chars; + +} + +/***************************************************************************** + * mos7840_close + * this function is called by the tty driver when a port is closed + *****************************************************************************/ + +static void mos7840_close(struct usb_serial_port *port) +{ + struct usb_serial *serial; + struct moschip_port *mos7840_port; + struct moschip_port *port0; + int j; + __u16 Data; + + if (mos7840_port_paranoia_check(port, __func__)) + return; + + serial = mos7840_get_usb_serial(port, __func__); + if (!serial) + return; + + mos7840_port = mos7840_get_port_private(port); + port0 = mos7840_get_port_private(serial->port[0]); + + if (mos7840_port == NULL || port0 == NULL) + return; + + for (j = 0; j < NUM_URBS; ++j) + usb_kill_urb(mos7840_port->write_urb_pool[j]); + + /* Freeing Write URBs */ + for (j = 0; j < NUM_URBS; ++j) { + if (mos7840_port->write_urb_pool[j]) { + kfree(mos7840_port->write_urb_pool[j]->transfer_buffer); + usb_free_urb(mos7840_port->write_urb_pool[j]); + } + } + + usb_kill_urb(mos7840_port->write_urb); + usb_kill_urb(mos7840_port->read_urb); + mos7840_port->read_urb_busy = false; + + port0->open_ports--; + dev_dbg(&port->dev, "%s in close%d\n", __func__, port0->open_ports); + if (port0->open_ports == 0) { + if (serial->port[0]->interrupt_in_urb) { + dev_dbg(&port->dev, "Shutdown interrupt_in_urb\n"); + usb_kill_urb(serial->port[0]->interrupt_in_urb); + } + } + + if (mos7840_port->write_urb) { + /* if this urb had a transfer buffer already (old tx) free it */ + kfree(mos7840_port->write_urb->transfer_buffer); + usb_free_urb(mos7840_port->write_urb); + } + + Data = 0x0; + mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); + + Data = 0x00; + mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); + + mos7840_port->open = 0; +} + +/***************************************************************************** + * mos7840_break + * this function sends a break to the port + *****************************************************************************/ +static void mos7840_break(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned char data; + struct usb_serial *serial; + struct moschip_port *mos7840_port; + + if (mos7840_port_paranoia_check(port, __func__)) + return; + + serial = mos7840_get_usb_serial(port, __func__); + if (!serial) + return; + + mos7840_port = mos7840_get_port_private(port); + + if (mos7840_port == NULL) + return; + + if (break_state == -1) + data = mos7840_port->shadowLCR | LCR_SET_BREAK; + else + data = mos7840_port->shadowLCR & ~LCR_SET_BREAK; + + /* FIXME: no locking on shadowLCR anywhere in driver */ + mos7840_port->shadowLCR = data; + dev_dbg(&port->dev, "%s mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR); + mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, + mos7840_port->shadowLCR); +} + +/***************************************************************************** + * mos7840_write_room + * this function is called by the tty driver when it wants to know how many + * bytes of data we can accept for a specific port. + * If successful, we return the amount of room that we have for this port + * Otherwise we return a negative error number. + *****************************************************************************/ + +static int mos7840_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + int i; + int room = 0; + unsigned long flags; + struct moschip_port *mos7840_port; + + if (mos7840_port_paranoia_check(port, __func__)) + return -1; + + mos7840_port = mos7840_get_port_private(port); + if (mos7840_port == NULL) + return -1; + + spin_lock_irqsave(&mos7840_port->pool_lock, flags); + for (i = 0; i < NUM_URBS; ++i) { + if (!mos7840_port->busy[i]) + room += URB_TRANSFER_BUFFER_SIZE; + } + spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); + + room = (room == 0) ? 0 : room - URB_TRANSFER_BUFFER_SIZE + 1; + dev_dbg(&mos7840_port->port->dev, "%s - returns %d\n", __func__, room); + return room; + +} + +/***************************************************************************** + * mos7840_write + * this function is called by the tty driver when data should be written to + * the port. + * If successful, we return the number of bytes written, otherwise we + * return a negative error number. + *****************************************************************************/ + +static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *data, int count) +{ + int status; + int i; + int bytes_sent = 0; + int transfer_size; + unsigned long flags; + + struct moschip_port *mos7840_port; + struct usb_serial *serial; + struct urb *urb; + /* __u16 Data; */ + const unsigned char *current_position = data; + unsigned char *data1; + + if (mos7840_port_paranoia_check(port, __func__)) + return -1; + + serial = port->serial; + if (mos7840_serial_paranoia_check(serial, __func__)) + return -1; + + mos7840_port = mos7840_get_port_private(port); + if (mos7840_port == NULL) + return -1; + + /* try to find a free urb in the list */ + urb = NULL; + + spin_lock_irqsave(&mos7840_port->pool_lock, flags); + for (i = 0; i < NUM_URBS; ++i) { + if (!mos7840_port->busy[i]) { + mos7840_port->busy[i] = 1; + urb = mos7840_port->write_urb_pool[i]; + dev_dbg(&port->dev, "URB:%d\n", i); + break; + } + } + spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); + + if (urb == NULL) { + dev_dbg(&port->dev, "%s - no more free urbs\n", __func__); + goto exit; + } + + if (urb->transfer_buffer == NULL) { + urb->transfer_buffer = + kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); + if (!urb->transfer_buffer) + goto exit; + } + transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE); + + memcpy(urb->transfer_buffer, current_position, transfer_size); + + /* fill urb with data and submit */ + if ((serial->num_ports == 2) && (((__u16)port->port_number % 2) != 0)) { + usb_fill_bulk_urb(urb, + serial->dev, + usb_sndbulkpipe(serial->dev, + (port->bulk_out_endpointAddress) + 2), + urb->transfer_buffer, + transfer_size, + mos7840_bulk_out_data_callback, mos7840_port); + } else { + usb_fill_bulk_urb(urb, + serial->dev, + usb_sndbulkpipe(serial->dev, + port->bulk_out_endpointAddress), + urb->transfer_buffer, + transfer_size, + mos7840_bulk_out_data_callback, mos7840_port); + } + + data1 = urb->transfer_buffer; + dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress); + + if (mos7840_port->has_led) + mos7840_led_activity(port); + + /* send it down the pipe */ + status = usb_submit_urb(urb, GFP_ATOMIC); + + if (status) { + mos7840_port->busy[i] = 0; + dev_err_console(port, "%s - usb_submit_urb(write bulk) failed " + "with status = %d\n", __func__, status); + bytes_sent = status; + goto exit; + } + bytes_sent = transfer_size; + port->icount.tx += transfer_size; + dev_dbg(&port->dev, "icount.tx is %d:\n", port->icount.tx); +exit: + return bytes_sent; + +} + +/***************************************************************************** + * mos7840_throttle + * this function is called by the tty driver when it wants to stop the data + * being read from the port. + *****************************************************************************/ + +static void mos7840_throttle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct moschip_port *mos7840_port; + int status; + + if (mos7840_port_paranoia_check(port, __func__)) + return; + + mos7840_port = mos7840_get_port_private(port); + + if (mos7840_port == NULL) + return; + + if (!mos7840_port->open) { + dev_dbg(&port->dev, "%s", "port not opened\n"); + return; + } + + /* if we are implementing XON/XOFF, send the stop character */ + if (I_IXOFF(tty)) { + unsigned char stop_char = STOP_CHAR(tty); + status = mos7840_write(tty, port, &stop_char, 1); + if (status <= 0) + return; + } + /* if we are implementing RTS/CTS, toggle that line */ + if (tty->termios.c_cflag & CRTSCTS) { + mos7840_port->shadowMCR &= ~MCR_RTS; + status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, + mos7840_port->shadowMCR); + if (status < 0) + return; + } +} + +/***************************************************************************** + * mos7840_unthrottle + * this function is called by the tty driver when it wants to resume + * the data being read from the port (called after mos7840_throttle is + * called) + *****************************************************************************/ +static void mos7840_unthrottle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + int status; + struct moschip_port *mos7840_port = mos7840_get_port_private(port); + + if (mos7840_port_paranoia_check(port, __func__)) + return; + + if (mos7840_port == NULL) + return; + + if (!mos7840_port->open) { + dev_dbg(&port->dev, "%s - port not opened\n", __func__); + return; + } + + /* if we are implementing XON/XOFF, send the start character */ + if (I_IXOFF(tty)) { + unsigned char start_char = START_CHAR(tty); + status = mos7840_write(tty, port, &start_char, 1); + if (status <= 0) + return; + } + + /* if we are implementing RTS/CTS, toggle that line */ + if (tty->termios.c_cflag & CRTSCTS) { + mos7840_port->shadowMCR |= MCR_RTS; + status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, + mos7840_port->shadowMCR); + if (status < 0) + return; + } +} + +static int mos7840_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct moschip_port *mos7840_port; + unsigned int result; + __u16 msr; + __u16 mcr; + int status; + mos7840_port = mos7840_get_port_private(port); + + if (mos7840_port == NULL) + return -ENODEV; + + status = mos7840_get_uart_reg(port, MODEM_STATUS_REGISTER, &msr); + if (status != 1) + return -EIO; + status = mos7840_get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr); + if (status != 1) + return -EIO; + result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) + | ((mcr & MCR_RTS) ? TIOCM_RTS : 0) + | ((mcr & MCR_LOOPBACK) ? TIOCM_LOOP : 0) + | ((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0) + | ((msr & MOS7840_MSR_CD) ? TIOCM_CAR : 0) + | ((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0) + | ((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0); + + dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result); + + return result; +} + +static int mos7840_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct moschip_port *mos7840_port; + unsigned int mcr; + int status; + + mos7840_port = mos7840_get_port_private(port); + + if (mos7840_port == NULL) + return -ENODEV; + + /* FIXME: What locks the port registers ? */ + mcr = mos7840_port->shadowMCR; + if (clear & TIOCM_RTS) + mcr &= ~MCR_RTS; + if (clear & TIOCM_DTR) + mcr &= ~MCR_DTR; + if (clear & TIOCM_LOOP) + mcr &= ~MCR_LOOPBACK; + + if (set & TIOCM_RTS) + mcr |= MCR_RTS; + if (set & TIOCM_DTR) + mcr |= MCR_DTR; + if (set & TIOCM_LOOP) + mcr |= MCR_LOOPBACK; + + mos7840_port->shadowMCR = mcr; + + status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr); + if (status < 0) { + dev_dbg(&port->dev, "setting MODEM_CONTROL_REGISTER Failed\n"); + return status; + } + + return 0; +} + +/***************************************************************************** + * mos7840_calc_baud_rate_divisor + * this function calculates the proper baud rate divisor for the specified + * baud rate. + *****************************************************************************/ +static int mos7840_calc_baud_rate_divisor(struct usb_serial_port *port, + int baudRate, int *divisor, + __u16 *clk_sel_val) +{ + dev_dbg(&port->dev, "%s - %d\n", __func__, baudRate); + + if (baudRate <= 115200) { + *divisor = 115200 / baudRate; + *clk_sel_val = 0x0; + } + if ((baudRate > 115200) && (baudRate <= 230400)) { + *divisor = 230400 / baudRate; + *clk_sel_val = 0x10; + } else if ((baudRate > 230400) && (baudRate <= 403200)) { + *divisor = 403200 / baudRate; + *clk_sel_val = 0x20; + } else if ((baudRate > 403200) && (baudRate <= 460800)) { + *divisor = 460800 / baudRate; + *clk_sel_val = 0x30; + } else if ((baudRate > 460800) && (baudRate <= 806400)) { + *divisor = 806400 / baudRate; + *clk_sel_val = 0x40; + } else if ((baudRate > 806400) && (baudRate <= 921600)) { + *divisor = 921600 / baudRate; + *clk_sel_val = 0x50; + } else if ((baudRate > 921600) && (baudRate <= 1572864)) { + *divisor = 1572864 / baudRate; + *clk_sel_val = 0x60; + } else if ((baudRate > 1572864) && (baudRate <= 3145728)) { + *divisor = 3145728 / baudRate; + *clk_sel_val = 0x70; + } + return 0; +} + +/***************************************************************************** + * mos7840_send_cmd_write_baud_rate + * this function sends the proper command to change the baud rate of the + * specified port. + *****************************************************************************/ + +static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, + int baudRate) +{ + int divisor = 0; + int status; + __u16 Data; + unsigned char number; + __u16 clk_sel_val; + struct usb_serial_port *port; + + if (mos7840_port == NULL) + return -1; + + port = mos7840_port->port; + if (mos7840_port_paranoia_check(port, __func__)) + return -1; + + if (mos7840_serial_paranoia_check(port->serial, __func__)) + return -1; + + number = mos7840_port->port->port_number; + + dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudRate); + /* reset clk_uart_sel in spregOffset */ + if (baudRate > 115200) { +#ifdef HW_flow_control + /* NOTE: need to see the pther register to modify */ + /* setting h/w flow control bit to 1 */ + Data = 0x2b; + mos7840_port->shadowMCR = Data; + status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, + Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n"); + return -1; + } +#endif + + } else { +#ifdef HW_flow_control + /* setting h/w flow control bit to 0 */ + Data = 0xb; + mos7840_port->shadowMCR = Data; + status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, + Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n"); + return -1; + } +#endif + + } + + if (1) { /* baudRate <= 115200) */ + clk_sel_val = 0x0; + Data = 0x0; + status = mos7840_calc_baud_rate_divisor(port, baudRate, &divisor, + &clk_sel_val); + status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, + &Data); + if (status < 0) { + dev_dbg(&port->dev, "reading spreg failed in set_serial_baud\n"); + return -1; + } + Data = (Data & 0x8f) | clk_sel_val; + status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, + Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n"); + return -1; + } + /* Calculate the Divisor */ + + if (status) { + dev_err(&port->dev, "%s - bad baud rate\n", __func__); + return status; + } + /* Enable access to divisor latch */ + Data = mos7840_port->shadowLCR | SERIAL_LCR_DLAB; + mos7840_port->shadowLCR = Data; + mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); + + /* Write the divisor */ + Data = (unsigned char)(divisor & 0xff); + dev_dbg(&port->dev, "set_serial_baud Value to write DLL is %x\n", Data); + mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data); + + Data = (unsigned char)((divisor & 0xff00) >> 8); + dev_dbg(&port->dev, "set_serial_baud Value to write DLM is %x\n", Data); + mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data); + + /* Disable access to divisor latch */ + Data = mos7840_port->shadowLCR & ~SERIAL_LCR_DLAB; + mos7840_port->shadowLCR = Data; + mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); + + } + return status; +} + +/***************************************************************************** + * mos7840_change_port_settings + * This routine is called to set the UART on the device to match + * the specified new settings. + *****************************************************************************/ + +static void mos7840_change_port_settings(struct tty_struct *tty, + struct moschip_port *mos7840_port, struct ktermios *old_termios) +{ + int baud; + unsigned cflag; + unsigned iflag; + __u8 lData; + __u8 lParity; + __u8 lStop; + int status; + __u16 Data; + struct usb_serial_port *port; + struct usb_serial *serial; + + if (mos7840_port == NULL) + return; + + port = mos7840_port->port; + + if (mos7840_port_paranoia_check(port, __func__)) + return; + + if (mos7840_serial_paranoia_check(port->serial, __func__)) + return; + + serial = port->serial; + + if (!mos7840_port->open) { + dev_dbg(&port->dev, "%s - port not opened\n", __func__); + return; + } + + lData = LCR_BITS_8; + lStop = LCR_STOP_1; + lParity = LCR_PAR_NONE; + + cflag = tty->termios.c_cflag; + iflag = tty->termios.c_iflag; + + /* Change the number of bits */ + switch (cflag & CSIZE) { + case CS5: + lData = LCR_BITS_5; + break; + + case CS6: + lData = LCR_BITS_6; + break; + + case CS7: + lData = LCR_BITS_7; + break; + + default: + case CS8: + lData = LCR_BITS_8; + break; + } + + /* Change the Parity bit */ + if (cflag & PARENB) { + if (cflag & PARODD) { + lParity = LCR_PAR_ODD; + dev_dbg(&port->dev, "%s - parity = odd\n", __func__); + } else { + lParity = LCR_PAR_EVEN; + dev_dbg(&port->dev, "%s - parity = even\n", __func__); + } + + } else { + dev_dbg(&port->dev, "%s - parity = none\n", __func__); + } + + if (cflag & CMSPAR) + lParity = lParity | 0x20; + + /* Change the Stop bit */ + if (cflag & CSTOPB) { + lStop = LCR_STOP_2; + dev_dbg(&port->dev, "%s - stop bits = 2\n", __func__); + } else { + lStop = LCR_STOP_1; + dev_dbg(&port->dev, "%s - stop bits = 1\n", __func__); + } + + /* Update the LCR with the correct value */ + mos7840_port->shadowLCR &= + ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); + mos7840_port->shadowLCR |= (lData | lParity | lStop); + + dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is %x\n", __func__, + mos7840_port->shadowLCR); + /* Disable Interrupts */ + Data = 0x00; + mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); + + Data = 0x00; + mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); + + Data = 0xcf; + mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); + + /* Send the updated LCR value to the mos7840 */ + Data = mos7840_port->shadowLCR; + + mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); + + Data = 0x00b; + mos7840_port->shadowMCR = Data; + mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); + Data = 0x00b; + mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); + + /* set up the MCR register and send it to the mos7840 */ + + mos7840_port->shadowMCR = MCR_MASTER_IE; + if (cflag & CBAUD) + mos7840_port->shadowMCR |= (MCR_DTR | MCR_RTS); + + if (cflag & CRTSCTS) + mos7840_port->shadowMCR |= (MCR_XON_ANY); + else + mos7840_port->shadowMCR &= ~(MCR_XON_ANY); + + Data = mos7840_port->shadowMCR; + mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); + + /* Determine divisor based on baud rate */ + baud = tty_get_baud_rate(tty); + + if (!baud) { + /* pick a default, any default... */ + dev_dbg(&port->dev, "%s", "Picked default baud...\n"); + baud = 9600; + } + + dev_dbg(&port->dev, "%s - baud rate = %d\n", __func__, baud); + status = mos7840_send_cmd_write_baud_rate(mos7840_port, baud); + + /* Enable Interrupts */ + Data = 0x0c; + mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); + + if (mos7840_port->read_urb_busy == false) { + mos7840_port->read_urb_busy = true; + status = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL); + if (status) { + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", + status); + mos7840_port->read_urb_busy = false; + } + } + dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is End %x\n", __func__, + mos7840_port->shadowLCR); +} + +/***************************************************************************** + * mos7840_set_termios + * this function is called by the tty driver when it wants to change + * the termios structure + *****************************************************************************/ + +static void mos7840_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old_termios) +{ + int status; + unsigned int cflag; + struct usb_serial *serial; + struct moschip_port *mos7840_port; + + if (mos7840_port_paranoia_check(port, __func__)) + return; + + serial = port->serial; + + if (mos7840_serial_paranoia_check(serial, __func__)) + return; + + mos7840_port = mos7840_get_port_private(port); + + if (mos7840_port == NULL) + return; + + if (!mos7840_port->open) { + dev_dbg(&port->dev, "%s - port not opened\n", __func__); + return; + } + + dev_dbg(&port->dev, "%s", "setting termios - \n"); + + cflag = tty->termios.c_cflag; + + dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, + tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag)); + dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, + old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); + + /* change the port settings to the new ones specified */ + + mos7840_change_port_settings(tty, mos7840_port, old_termios); + + if (!mos7840_port->read_urb) { + dev_dbg(&port->dev, "%s", "URB KILLED !!!!!\n"); + return; + } + + if (mos7840_port->read_urb_busy == false) { + mos7840_port->read_urb_busy = true; + status = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL); + if (status) { + dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", + status); + mos7840_port->read_urb_busy = false; + } + } +} + +/***************************************************************************** + * mos7840_get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + *****************************************************************************/ + +static int mos7840_get_lsr_info(struct tty_struct *tty, + unsigned int __user *value) +{ + int count; + unsigned int result = 0; + + count = mos7840_chars_in_buffer(tty); + if (count == 0) + result = TIOCSER_TEMT; + + if (copy_to_user(value, &result, sizeof(int))) + return -EFAULT; + return 0; +} + +/***************************************************************************** + * mos7840_get_serial_info + * function to get information about serial port + *****************************************************************************/ + +static int mos7840_get_serial_info(struct moschip_port *mos7840_port, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp; + + if (mos7840_port == NULL) + return -1; + + if (!retinfo) + return -EFAULT; + + memset(&tmp, 0, sizeof(tmp)); + + tmp.type = PORT_16550A; + tmp.line = mos7840_port->port->minor; + tmp.port = mos7840_port->port->port_number; + tmp.irq = 0; + tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; + tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; + tmp.baud_base = 9600; + tmp.close_delay = 5 * HZ; + tmp.closing_wait = 30 * HZ; + + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +/***************************************************************************** + * SerialIoctl + * this function handles any ioctl calls to the driver + *****************************************************************************/ + +static int mos7840_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + void __user *argp = (void __user *)arg; + struct moschip_port *mos7840_port; + + if (mos7840_port_paranoia_check(port, __func__)) + return -1; + + mos7840_port = mos7840_get_port_private(port); + + if (mos7840_port == NULL) + return -1; + + switch (cmd) { + /* return number of bytes available */ + + case TIOCSERGETLSR: + dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__); + return mos7840_get_lsr_info(tty, argp); + + case TIOCGSERIAL: + dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__); + return mos7840_get_serial_info(mos7840_port, argp); + + case TIOCSSERIAL: + dev_dbg(&port->dev, "%s TIOCSSERIAL\n", __func__); + break; + default: + break; + } + return -ENOIOCTLCMD; +} + +static int mos7810_check(struct usb_serial *serial) +{ + int i, pass_count = 0; + u8 *buf; + __u16 data = 0, mcr_data = 0; + __u16 test_pattern = 0x55AA; + int res; + + buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL); + if (!buf) + return 0; /* failed to identify 7810 */ + + /* Store MCR setting */ + res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + MCS_RDREQ, MCS_RD_RTYPE, 0x0300, MODEM_CONTROL_REGISTER, + buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + if (res == VENDOR_READ_LENGTH) + mcr_data = *buf; + + for (i = 0; i < 16; i++) { + /* Send the 1-bit test pattern out to MCS7810 test pin */ + usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + MCS_WRREQ, MCS_WR_RTYPE, + (0x0300 | (((test_pattern >> i) & 0x0001) << 1)), + MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT); + + /* Read the test pattern back */ + res = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ, + MCS_RD_RTYPE, 0, GPIO_REGISTER, buf, + VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + if (res == VENDOR_READ_LENGTH) + data = *buf; + + /* If this is a MCS7810 device, both test patterns must match */ + if (((test_pattern >> i) ^ (~data >> 1)) & 0x0001) + break; + + pass_count++; + } + + /* Restore MCR setting */ + usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCS_WRREQ, + MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL, + 0, MOS_WDR_TIMEOUT); + + kfree(buf); + + if (pass_count == 16) + return 1; + + return 0; +} + +static int mos7840_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); + u8 *buf; + int device_type; + + if (product == MOSCHIP_DEVICE_ID_7810 || + product == MOSCHIP_DEVICE_ID_7820) { + device_type = product; + goto out; + } + + buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf, + VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + + /* For a MCS7840 device GPIO0 must be set to 1 */ + if (buf[0] & 0x01) + device_type = MOSCHIP_DEVICE_ID_7840; + else if (mos7810_check(serial)) + device_type = MOSCHIP_DEVICE_ID_7810; + else + device_type = MOSCHIP_DEVICE_ID_7820; + + kfree(buf); +out: + usb_set_serial_data(serial, (void *)(unsigned long)device_type); + + return 0; +} + +static int mos7840_calc_num_ports(struct usb_serial *serial) +{ + int device_type = (unsigned long)usb_get_serial_data(serial); + int mos7840_num_ports; + + mos7840_num_ports = (device_type >> 4) & 0x000F; + + return mos7840_num_ports; +} + +static int mos7840_port_probe(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + int device_type = (unsigned long)usb_get_serial_data(serial); + struct moschip_port *mos7840_port; + int status; + int pnum; + __u16 Data; + + /* we set up the pointers to the endpoints in the mos7840_open * + * function, as the structures aren't created yet. */ + + pnum = port->port_number; + + dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum); + mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); + if (!mos7840_port) + return -ENOMEM; + + /* Initialize all port interrupt end point to port 0 int + * endpoint. Our device has only one interrupt end point + * common to all port */ + + mos7840_port->port = port; + mos7840_set_port_private(port, mos7840_port); + spin_lock_init(&mos7840_port->pool_lock); + + /* minor is not initialised until later by + * usb-serial.c:get_free_serial() and cannot therefore be used + * to index device instances */ + mos7840_port->port_num = pnum + 1; + dev_dbg(&port->dev, "port->minor = %d\n", port->minor); + dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num); + + if (mos7840_port->port_num == 1) { + mos7840_port->SpRegOffset = 0x0; + mos7840_port->ControlRegOffset = 0x1; + mos7840_port->DcrRegOffset = 0x4; + } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 4)) { + mos7840_port->SpRegOffset = 0x8; + mos7840_port->ControlRegOffset = 0x9; + mos7840_port->DcrRegOffset = 0x16; + } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 2)) { + mos7840_port->SpRegOffset = 0xa; + mos7840_port->ControlRegOffset = 0xb; + mos7840_port->DcrRegOffset = 0x19; + } else if ((mos7840_port->port_num == 3) && (serial->num_ports == 4)) { + mos7840_port->SpRegOffset = 0xa; + mos7840_port->ControlRegOffset = 0xb; + mos7840_port->DcrRegOffset = 0x19; + } else if ((mos7840_port->port_num == 4) && (serial->num_ports == 4)) { + mos7840_port->SpRegOffset = 0xc; + mos7840_port->ControlRegOffset = 0xd; + mos7840_port->DcrRegOffset = 0x1c; + } + mos7840_dump_serial_port(port, mos7840_port); + mos7840_set_port_private(port, mos7840_port); + + /* enable rx_disable bit in control register */ + status = mos7840_get_reg_sync(port, + mos7840_port->ControlRegOffset, &Data); + if (status < 0) { + dev_dbg(&port->dev, "Reading ControlReg failed status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "ControlReg Reading success val is %x, status%d\n", Data, status); + Data |= 0x08; /* setting driver done bit */ + Data |= 0x04; /* sp1_bit to have cts change reflect in + modem status reg */ + + /* Data |= 0x20; //rx_disable bit */ + status = mos7840_set_reg_sync(port, + mos7840_port->ControlRegOffset, Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "ControlReg Writing success(rx_disable) status%d\n", status); + + /* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 + and 0x24 in DCR3 */ + Data = 0x01; + status = mos7840_set_reg_sync(port, + (__u16) (mos7840_port->DcrRegOffset + 0), Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing DCR0 failed status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "DCR0 Writing success status%d\n", status); + + Data = 0x05; + status = mos7840_set_reg_sync(port, + (__u16) (mos7840_port->DcrRegOffset + 1), Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing DCR1 failed status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "DCR1 Writing success status%d\n", status); + + Data = 0x24; + status = mos7840_set_reg_sync(port, + (__u16) (mos7840_port->DcrRegOffset + 2), Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing DCR2 failed status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "DCR2 Writing success status%d\n", status); + + /* write values in clkstart0x0 and clkmulti 0x20 */ + Data = 0x0; + status = mos7840_set_reg_sync(port, CLK_START_VALUE_REGISTER, Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status); + + Data = 0x20; + status = mos7840_set_reg_sync(port, CLK_MULTI_REGISTER, Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status); + goto error; + } else + dev_dbg(&port->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status); + + /* write value 0x0 to scratchpad register */ + Data = 0x00; + status = mos7840_set_uart_reg(port, SCRATCH_PAD_REGISTER, Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status); + goto out; + } else + dev_dbg(&port->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status); + + /* Zero Length flag register */ + if ((mos7840_port->port_num != 1) && (serial->num_ports == 2)) { + Data = 0xff; + status = mos7840_set_reg_sync(port, + (__u16) (ZLP_REG1 + + ((__u16)mos7840_port->port_num)), Data); + dev_dbg(&port->dev, "ZLIP offset %x\n", + (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num))); + if (status < 0) { + dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 2, status); + goto out; + } else + dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 2, status); + } else { + Data = 0xff; + status = mos7840_set_reg_sync(port, + (__u16) (ZLP_REG1 + + ((__u16)mos7840_port->port_num) - 0x1), Data); + dev_dbg(&port->dev, "ZLIP offset %x\n", + (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1)); + if (status < 0) { + dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 1, status); + goto out; + } else + dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 1, status); + + } + mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL); + mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL); + mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest), + GFP_KERNEL); + if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf || + !mos7840_port->dr) { + status = -ENOMEM; + goto error; + } + + mos7840_port->has_led = false; + + /* Initialize LED timers */ + if (device_type == MOSCHIP_DEVICE_ID_7810) { + mos7840_port->has_led = true; + + mos7840_port->led_urb = usb_alloc_urb(0, GFP_KERNEL); + mos7840_port->led_dr = kmalloc(sizeof(*mos7840_port->led_dr), + GFP_KERNEL); + if (!mos7840_port->led_urb || !mos7840_port->led_dr) { + status = -ENOMEM; + goto error; + } + + init_timer(&mos7840_port->led_timer1); + mos7840_port->led_timer1.function = mos7840_led_off; + mos7840_port->led_timer1.expires = + jiffies + msecs_to_jiffies(LED_ON_MS); + mos7840_port->led_timer1.data = (unsigned long)mos7840_port; + + init_timer(&mos7840_port->led_timer2); + mos7840_port->led_timer2.function = mos7840_led_flag_off; + mos7840_port->led_timer2.expires = + jiffies + msecs_to_jiffies(LED_OFF_MS); + mos7840_port->led_timer2.data = (unsigned long)mos7840_port; + + /* Turn off LED */ + mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300); + } +out: + if (pnum == serial->num_ports - 1) { + /* Zero Length flag enable */ + Data = 0x0f; + status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data); + if (status < 0) { + dev_dbg(&port->dev, "Writing ZLP_REG5 failed status-0x%x\n", status); + goto error; + } else + dev_dbg(&port->dev, "ZLP_REG5 Writing success status%d\n", status); + + /* setting configuration feature to one */ + usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + 0x03, 0x00, 0x01, 0x00, NULL, 0x00, + MOS_WDR_TIMEOUT); + } + return 0; +error: + kfree(mos7840_port->led_dr); + usb_free_urb(mos7840_port->led_urb); + kfree(mos7840_port->dr); + kfree(mos7840_port->ctrl_buf); + usb_free_urb(mos7840_port->control_urb); + kfree(mos7840_port); + + return status; +} + +static int mos7840_port_remove(struct usb_serial_port *port) +{ + struct moschip_port *mos7840_port; + + mos7840_port = mos7840_get_port_private(port); + + if (mos7840_port->has_led) { + /* Turn off LED */ + mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300); + + del_timer_sync(&mos7840_port->led_timer1); + del_timer_sync(&mos7840_port->led_timer2); + + usb_kill_urb(mos7840_port->led_urb); + usb_free_urb(mos7840_port->led_urb); + kfree(mos7840_port->led_dr); + } + usb_kill_urb(mos7840_port->control_urb); + usb_free_urb(mos7840_port->control_urb); + kfree(mos7840_port->ctrl_buf); + kfree(mos7840_port->dr); + kfree(mos7840_port); + + return 0; +} + +static struct usb_serial_driver moschip7840_4port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "mos7840", + }, + .description = DRIVER_DESC, + .id_table = id_table, + .num_ports = 4, + .open = mos7840_open, + .close = mos7840_close, + .write = mos7840_write, + .write_room = mos7840_write_room, + .chars_in_buffer = mos7840_chars_in_buffer, + .throttle = mos7840_throttle, + .unthrottle = mos7840_unthrottle, + .calc_num_ports = mos7840_calc_num_ports, + .probe = mos7840_probe, + .ioctl = mos7840_ioctl, + .set_termios = mos7840_set_termios, + .break_ctl = mos7840_break, + .tiocmget = mos7840_tiocmget, + .tiocmset = mos7840_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, + .port_probe = mos7840_port_probe, + .port_remove = mos7840_port_remove, + .read_bulk_callback = mos7840_bulk_in_callback, + .read_int_callback = mos7840_interrupt_callback, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &moschip7840_4port_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/mxuport.c b/kernel/drivers/usb/serial/mxuport.c new file mode 100644 index 000000000..460a40669 --- /dev/null +++ b/kernel/drivers/usb/serial/mxuport.c @@ -0,0 +1,1394 @@ +/* + * mxuport.c - MOXA UPort series driver + * + * Copyright (c) 2006 Moxa Technologies Co., Ltd. + * Copyright (c) 2013 Andrew Lunn <andrew@lunn.ch> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Supports the following Moxa USB to serial converters: + * 2 ports : UPort 1250, UPort 1250I + * 4 ports : UPort 1410, UPort 1450, UPort 1450I + * 8 ports : UPort 1610-8, UPort 1650-8 + * 16 ports : UPort 1610-16, UPort 1650-16 + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/firmware.h> +#include <linux/jiffies.h> +#include <linux/serial.h> +#include <linux/serial_reg.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <asm/unaligned.h> + +/* Definitions for the vendor ID and device ID */ +#define MX_USBSERIAL_VID 0x110A +#define MX_UPORT1250_PID 0x1250 +#define MX_UPORT1251_PID 0x1251 +#define MX_UPORT1410_PID 0x1410 +#define MX_UPORT1450_PID 0x1450 +#define MX_UPORT1451_PID 0x1451 +#define MX_UPORT1618_PID 0x1618 +#define MX_UPORT1658_PID 0x1658 +#define MX_UPORT1613_PID 0x1613 +#define MX_UPORT1653_PID 0x1653 + +/* Definitions for USB info */ +#define HEADER_SIZE 4 +#define EVENT_LENGTH 8 +#define DOWN_BLOCK_SIZE 64 + +/* Definitions for firmware info */ +#define VER_ADDR_1 0x20 +#define VER_ADDR_2 0x24 +#define VER_ADDR_3 0x28 + +/* Definitions for USB vendor request */ +#define RQ_VENDOR_NONE 0x00 +#define RQ_VENDOR_SET_BAUD 0x01 /* Set baud rate */ +#define RQ_VENDOR_SET_LINE 0x02 /* Set line status */ +#define RQ_VENDOR_SET_CHARS 0x03 /* Set Xon/Xoff chars */ +#define RQ_VENDOR_SET_RTS 0x04 /* Set RTS */ +#define RQ_VENDOR_SET_DTR 0x05 /* Set DTR */ +#define RQ_VENDOR_SET_XONXOFF 0x06 /* Set auto Xon/Xoff */ +#define RQ_VENDOR_SET_RX_HOST_EN 0x07 /* Set RX host enable */ +#define RQ_VENDOR_SET_OPEN 0x08 /* Set open/close port */ +#define RQ_VENDOR_PURGE 0x09 /* Purge Rx/Tx buffer */ +#define RQ_VENDOR_SET_MCR 0x0A /* Set MCR register */ +#define RQ_VENDOR_SET_BREAK 0x0B /* Set Break signal */ + +#define RQ_VENDOR_START_FW_DOWN 0x0C /* Start firmware download */ +#define RQ_VENDOR_STOP_FW_DOWN 0x0D /* Stop firmware download */ +#define RQ_VENDOR_QUERY_FW_READY 0x0E /* Query if new firmware ready */ + +#define RQ_VENDOR_SET_FIFO_DISABLE 0x0F /* Set fifo disable */ +#define RQ_VENDOR_SET_INTERFACE 0x10 /* Set interface */ +#define RQ_VENDOR_SET_HIGH_PERFOR 0x11 /* Set hi-performance */ + +#define RQ_VENDOR_ERASE_BLOCK 0x12 /* Erase flash block */ +#define RQ_VENDOR_WRITE_PAGE 0x13 /* Write flash page */ +#define RQ_VENDOR_PREPARE_WRITE 0x14 /* Prepare write flash */ +#define RQ_VENDOR_CONFIRM_WRITE 0x15 /* Confirm write flash */ +#define RQ_VENDOR_LOCATE 0x16 /* Locate the device */ + +#define RQ_VENDOR_START_ROM_DOWN 0x17 /* Start firmware download */ +#define RQ_VENDOR_ROM_DATA 0x18 /* Rom file data */ +#define RQ_VENDOR_STOP_ROM_DOWN 0x19 /* Stop firmware download */ +#define RQ_VENDOR_FW_DATA 0x20 /* Firmware data */ + +#define RQ_VENDOR_RESET_DEVICE 0x23 /* Try to reset the device */ +#define RQ_VENDOR_QUERY_FW_CONFIG 0x24 + +#define RQ_VENDOR_GET_VERSION 0x81 /* Get firmware version */ +#define RQ_VENDOR_GET_PAGE 0x82 /* Read flash page */ +#define RQ_VENDOR_GET_ROM_PROC 0x83 /* Get ROM process state */ + +#define RQ_VENDOR_GET_INQUEUE 0x84 /* Data in input buffer */ +#define RQ_VENDOR_GET_OUTQUEUE 0x85 /* Data in output buffer */ + +#define RQ_VENDOR_GET_MSR 0x86 /* Get modem status register */ + +/* Definitions for UPort event type */ +#define UPORT_EVENT_NONE 0 /* None */ +#define UPORT_EVENT_TXBUF_THRESHOLD 1 /* Tx buffer threshold */ +#define UPORT_EVENT_SEND_NEXT 2 /* Send next */ +#define UPORT_EVENT_MSR 3 /* Modem status */ +#define UPORT_EVENT_LSR 4 /* Line status */ +#define UPORT_EVENT_MCR 5 /* Modem control */ + +/* Definitions for serial event type */ +#define SERIAL_EV_CTS 0x0008 /* CTS changed state */ +#define SERIAL_EV_DSR 0x0010 /* DSR changed state */ +#define SERIAL_EV_RLSD 0x0020 /* RLSD changed state */ + +/* Definitions for modem control event type */ +#define SERIAL_EV_XOFF 0x40 /* XOFF received */ + +/* Definitions for line control of communication */ +#define MX_WORDLENGTH_5 5 +#define MX_WORDLENGTH_6 6 +#define MX_WORDLENGTH_7 7 +#define MX_WORDLENGTH_8 8 + +#define MX_PARITY_NONE 0 +#define MX_PARITY_ODD 1 +#define MX_PARITY_EVEN 2 +#define MX_PARITY_MARK 3 +#define MX_PARITY_SPACE 4 + +#define MX_STOP_BITS_1 0 +#define MX_STOP_BITS_1_5 1 +#define MX_STOP_BITS_2 2 + +#define MX_RTS_DISABLE 0x0 +#define MX_RTS_ENABLE 0x1 +#define MX_RTS_HW 0x2 +#define MX_RTS_NO_CHANGE 0x3 /* Flag, not valid register value*/ + +#define MX_INT_RS232 0 +#define MX_INT_2W_RS485 1 +#define MX_INT_RS422 2 +#define MX_INT_4W_RS485 3 + +/* Definitions for holding reason */ +#define MX_WAIT_FOR_CTS 0x0001 +#define MX_WAIT_FOR_DSR 0x0002 +#define MX_WAIT_FOR_DCD 0x0004 +#define MX_WAIT_FOR_XON 0x0008 +#define MX_WAIT_FOR_START_TX 0x0010 +#define MX_WAIT_FOR_UNTHROTTLE 0x0020 +#define MX_WAIT_FOR_LOW_WATER 0x0040 +#define MX_WAIT_FOR_SEND_NEXT 0x0080 + +#define MX_UPORT_2_PORT BIT(0) +#define MX_UPORT_4_PORT BIT(1) +#define MX_UPORT_8_PORT BIT(2) +#define MX_UPORT_16_PORT BIT(3) + +/* This structure holds all of the local port information */ +struct mxuport_port { + u8 mcr_state; /* Last MCR state */ + u8 msr_state; /* Last MSR state */ + struct mutex mutex; /* Protects mcr_state */ + spinlock_t spinlock; /* Protects msr_state */ +}; + +/* Table of devices that work with this driver */ +static const struct usb_device_id mxuport_idtable[] = { + { USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1250_PID), + .driver_info = MX_UPORT_2_PORT }, + { USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1251_PID), + .driver_info = MX_UPORT_2_PORT }, + { USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1410_PID), + .driver_info = MX_UPORT_4_PORT }, + { USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1450_PID), + .driver_info = MX_UPORT_4_PORT }, + { USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1451_PID), + .driver_info = MX_UPORT_4_PORT }, + { USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1618_PID), + .driver_info = MX_UPORT_8_PORT }, + { USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1658_PID), + .driver_info = MX_UPORT_8_PORT }, + { USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1613_PID), + .driver_info = MX_UPORT_16_PORT }, + { USB_DEVICE(MX_USBSERIAL_VID, MX_UPORT1653_PID), + .driver_info = MX_UPORT_16_PORT }, + {} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, mxuport_idtable); + +/* + * Add a four byte header containing the port number and the number of + * bytes of data in the message. Return the number of bytes in the + * buffer. + */ +static int mxuport_prepare_write_buffer(struct usb_serial_port *port, + void *dest, size_t size) +{ + u8 *buf = dest; + int count; + + count = kfifo_out_locked(&port->write_fifo, buf + HEADER_SIZE, + size - HEADER_SIZE, + &port->lock); + + put_unaligned_be16(port->port_number, buf); + put_unaligned_be16(count, buf + 2); + + dev_dbg(&port->dev, "%s - size %zd count %d\n", __func__, + size, count); + + return count + HEADER_SIZE; +} + +/* Read the given buffer in from the control pipe. */ +static int mxuport_recv_ctrl_urb(struct usb_serial *serial, + u8 request, u16 value, u16 index, + u8 *data, size_t size) +{ + int status; + + status = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + request, + (USB_DIR_IN | USB_TYPE_VENDOR | + USB_RECIP_DEVICE), value, index, + data, size, + USB_CTRL_GET_TIMEOUT); + if (status < 0) { + dev_err(&serial->interface->dev, + "%s - usb_control_msg failed (%d)\n", + __func__, status); + return status; + } + + if (status != size) { + dev_err(&serial->interface->dev, + "%s - short read (%d / %zd)\n", + __func__, status, size); + return -EIO; + } + + return status; +} + +/* Write the given buffer out to the control pipe. */ +static int mxuport_send_ctrl_data_urb(struct usb_serial *serial, + u8 request, + u16 value, u16 index, + u8 *data, size_t size) +{ + int status; + + status = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), + request, + (USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_DEVICE), value, index, + data, size, + USB_CTRL_SET_TIMEOUT); + if (status < 0) { + dev_err(&serial->interface->dev, + "%s - usb_control_msg failed (%d)\n", + __func__, status); + return status; + } + + if (status != size) { + dev_err(&serial->interface->dev, + "%s - short write (%d / %zd)\n", + __func__, status, size); + return -EIO; + } + + return 0; +} + +/* Send a vendor request without any data */ +static int mxuport_send_ctrl_urb(struct usb_serial *serial, + u8 request, u16 value, u16 index) +{ + return mxuport_send_ctrl_data_urb(serial, request, value, index, + NULL, 0); +} + +/* + * mxuport_throttle - throttle function of driver + * + * This function is called by the tty driver when it wants to stop the + * data being read from the port. Since all the data comes over one + * bulk in endpoint, we cannot stop submitting urbs by setting + * port->throttle. Instead tell the device to stop sending us data for + * the port. + */ +static void mxuport_throttle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + + dev_dbg(&port->dev, "%s\n", __func__); + + mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_RX_HOST_EN, + 0, port->port_number); +} + +/* + * mxuport_unthrottle - unthrottle function of driver + * + * This function is called by the tty driver when it wants to resume + * the data being read from the port. Tell the device it can resume + * sending us received data from the port. + */ +static void mxuport_unthrottle(struct tty_struct *tty) +{ + + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + + dev_dbg(&port->dev, "%s\n", __func__); + + mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_RX_HOST_EN, + 1, port->port_number); +} + +/* + * Processes one chunk of data received for a port. Mostly a copy of + * usb_serial_generic_process_read_urb(). + */ +static void mxuport_process_read_urb_data(struct usb_serial_port *port, + char *data, int size) +{ + int i; + + if (!port->port.console || !port->sysrq) { + tty_insert_flip_string(&port->port, data, size); + } else { + for (i = 0; i < size; i++, data++) { + if (!usb_serial_handle_sysrq_char(port, *data)) + tty_insert_flip_char(&port->port, *data, + TTY_NORMAL); + } + } + tty_flip_buffer_push(&port->port); +} + +static void mxuport_msr_event(struct usb_serial_port *port, u8 buf[4]) +{ + struct mxuport_port *mxport = usb_get_serial_port_data(port); + u8 rcv_msr_hold = buf[2] & 0xF0; + u16 rcv_msr_event = get_unaligned_be16(buf); + unsigned long flags; + + if (rcv_msr_event == 0) + return; + + /* Update MSR status */ + spin_lock_irqsave(&mxport->spinlock, flags); + + dev_dbg(&port->dev, "%s - current MSR status = 0x%x\n", + __func__, mxport->msr_state); + + if (rcv_msr_hold & UART_MSR_CTS) { + mxport->msr_state |= UART_MSR_CTS; + dev_dbg(&port->dev, "%s - CTS high\n", __func__); + } else { + mxport->msr_state &= ~UART_MSR_CTS; + dev_dbg(&port->dev, "%s - CTS low\n", __func__); + } + + if (rcv_msr_hold & UART_MSR_DSR) { + mxport->msr_state |= UART_MSR_DSR; + dev_dbg(&port->dev, "%s - DSR high\n", __func__); + } else { + mxport->msr_state &= ~UART_MSR_DSR; + dev_dbg(&port->dev, "%s - DSR low\n", __func__); + } + + if (rcv_msr_hold & UART_MSR_DCD) { + mxport->msr_state |= UART_MSR_DCD; + dev_dbg(&port->dev, "%s - DCD high\n", __func__); + } else { + mxport->msr_state &= ~UART_MSR_DCD; + dev_dbg(&port->dev, "%s - DCD low\n", __func__); + } + spin_unlock_irqrestore(&mxport->spinlock, flags); + + if (rcv_msr_event & + (SERIAL_EV_CTS | SERIAL_EV_DSR | SERIAL_EV_RLSD)) { + + if (rcv_msr_event & SERIAL_EV_CTS) { + port->icount.cts++; + dev_dbg(&port->dev, "%s - CTS change\n", __func__); + } + + if (rcv_msr_event & SERIAL_EV_DSR) { + port->icount.dsr++; + dev_dbg(&port->dev, "%s - DSR change\n", __func__); + } + + if (rcv_msr_event & SERIAL_EV_RLSD) { + port->icount.dcd++; + dev_dbg(&port->dev, "%s - DCD change\n", __func__); + } + wake_up_interruptible(&port->port.delta_msr_wait); + } +} + +static void mxuport_lsr_event(struct usb_serial_port *port, u8 buf[4]) +{ + u8 lsr_event = buf[2]; + + if (lsr_event & UART_LSR_BI) { + port->icount.brk++; + dev_dbg(&port->dev, "%s - break error\n", __func__); + } + + if (lsr_event & UART_LSR_FE) { + port->icount.frame++; + dev_dbg(&port->dev, "%s - frame error\n", __func__); + } + + if (lsr_event & UART_LSR_PE) { + port->icount.parity++; + dev_dbg(&port->dev, "%s - parity error\n", __func__); + } + + if (lsr_event & UART_LSR_OE) { + port->icount.overrun++; + dev_dbg(&port->dev, "%s - overrun error\n", __func__); + } +} + +/* + * When something interesting happens, modem control lines XON/XOFF + * etc, the device sends an event. Process these events. + */ +static void mxuport_process_read_urb_event(struct usb_serial_port *port, + u8 buf[4], u32 event) +{ + dev_dbg(&port->dev, "%s - receive event : %04x\n", __func__, event); + + switch (event) { + case UPORT_EVENT_SEND_NEXT: + /* + * Sent as part of the flow control on device buffers. + * Not currently used. + */ + break; + case UPORT_EVENT_MSR: + mxuport_msr_event(port, buf); + break; + case UPORT_EVENT_LSR: + mxuport_lsr_event(port, buf); + break; + case UPORT_EVENT_MCR: + /* + * Event to indicate a change in XON/XOFF from the + * peer. Currently not used. We just continue + * sending the device data and it will buffer it if + * needed. This event could be used for flow control + * between the host and the device. + */ + break; + default: + dev_dbg(&port->dev, "Unexpected event\n"); + break; + } +} + +/* + * One URB can contain data for multiple ports. Demultiplex the data, + * checking the port exists, is opened and the message is valid. + */ +static void mxuport_process_read_urb_demux_data(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct usb_serial *serial = port->serial; + u8 *data = urb->transfer_buffer; + u8 *end = data + urb->actual_length; + struct usb_serial_port *demux_port; + u8 *ch; + u16 rcv_port; + u16 rcv_len; + + while (data < end) { + if (data + HEADER_SIZE > end) { + dev_warn(&port->dev, "%s - message with short header\n", + __func__); + return; + } + + rcv_port = get_unaligned_be16(data); + if (rcv_port >= serial->num_ports) { + dev_warn(&port->dev, "%s - message for invalid port\n", + __func__); + return; + } + + demux_port = serial->port[rcv_port]; + rcv_len = get_unaligned_be16(data + 2); + if (!rcv_len || data + HEADER_SIZE + rcv_len > end) { + dev_warn(&port->dev, "%s - short data\n", __func__); + return; + } + + if (test_bit(ASYNCB_INITIALIZED, &demux_port->port.flags)) { + ch = data + HEADER_SIZE; + mxuport_process_read_urb_data(demux_port, ch, rcv_len); + } else { + dev_dbg(&demux_port->dev, "%s - data for closed port\n", + __func__); + } + data += HEADER_SIZE + rcv_len; + } +} + +/* + * One URB can contain events for multiple ports. Demultiplex the event, + * checking the port exists, and is opened. + */ +static void mxuport_process_read_urb_demux_event(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct usb_serial *serial = port->serial; + u8 *data = urb->transfer_buffer; + u8 *end = data + urb->actual_length; + struct usb_serial_port *demux_port; + u8 *ch; + u16 rcv_port; + u16 rcv_event; + + while (data < end) { + if (data + EVENT_LENGTH > end) { + dev_warn(&port->dev, "%s - message with short event\n", + __func__); + return; + } + + rcv_port = get_unaligned_be16(data); + if (rcv_port >= serial->num_ports) { + dev_warn(&port->dev, "%s - message for invalid port\n", + __func__); + return; + } + + demux_port = serial->port[rcv_port]; + if (test_bit(ASYNCB_INITIALIZED, &demux_port->port.flags)) { + ch = data + HEADER_SIZE; + rcv_event = get_unaligned_be16(data + 2); + mxuport_process_read_urb_event(demux_port, ch, + rcv_event); + } else { + dev_dbg(&demux_port->dev, + "%s - event for closed port\n", __func__); + } + data += EVENT_LENGTH; + } +} + +/* + * This is called when we have received data on the bulk in + * endpoint. Depending on which port it was received on, it can + * contain serial data or events. + */ +static void mxuport_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct usb_serial *serial = port->serial; + + if (port == serial->port[0]) + mxuport_process_read_urb_demux_data(urb); + + if (port == serial->port[1]) + mxuport_process_read_urb_demux_event(urb); +} + +/* + * Ask the device how many bytes it has queued to be sent out. If + * there are none, return true. + */ +static bool mxuport_tx_empty(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + bool is_empty = true; + u32 txlen; + u8 *len_buf; + int err; + + len_buf = kzalloc(4, GFP_KERNEL); + if (!len_buf) + goto out; + + err = mxuport_recv_ctrl_urb(serial, RQ_VENDOR_GET_OUTQUEUE, 0, + port->port_number, len_buf, 4); + if (err < 0) + goto out; + + txlen = get_unaligned_be32(len_buf); + dev_dbg(&port->dev, "%s - tx len = %u\n", __func__, txlen); + + if (txlen != 0) + is_empty = false; + +out: + kfree(len_buf); + return is_empty; +} + +static int mxuport_set_mcr(struct usb_serial_port *port, u8 mcr_state) +{ + struct usb_serial *serial = port->serial; + int err; + + dev_dbg(&port->dev, "%s - %02x\n", __func__, mcr_state); + + err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_MCR, + mcr_state, port->port_number); + if (err) + dev_err(&port->dev, "%s - failed to change MCR\n", __func__); + + return err; +} + +static int mxuport_set_dtr(struct usb_serial_port *port, int on) +{ + struct mxuport_port *mxport = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + int err; + + mutex_lock(&mxport->mutex); + + err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_DTR, + !!on, port->port_number); + if (!err) { + if (on) + mxport->mcr_state |= UART_MCR_DTR; + else + mxport->mcr_state &= ~UART_MCR_DTR; + } + + mutex_unlock(&mxport->mutex); + + return err; +} + +static int mxuport_set_rts(struct usb_serial_port *port, u8 state) +{ + struct mxuport_port *mxport = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + int err; + u8 mcr_state; + + mutex_lock(&mxport->mutex); + mcr_state = mxport->mcr_state; + + switch (state) { + case MX_RTS_DISABLE: + mcr_state &= ~UART_MCR_RTS; + break; + case MX_RTS_ENABLE: + mcr_state |= UART_MCR_RTS; + break; + case MX_RTS_HW: + /* + * Do not update mxport->mcr_state when doing hardware + * flow control. + */ + break; + default: + /* + * Should not happen, but somebody might try passing + * MX_RTS_NO_CHANGE, which is not valid. + */ + err = -EINVAL; + goto out; + } + err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_RTS, + state, port->port_number); + if (!err) + mxport->mcr_state = mcr_state; + +out: + mutex_unlock(&mxport->mutex); + + return err; +} + +static void mxuport_dtr_rts(struct usb_serial_port *port, int on) +{ + struct mxuport_port *mxport = usb_get_serial_port_data(port); + u8 mcr_state; + int err; + + mutex_lock(&mxport->mutex); + mcr_state = mxport->mcr_state; + + if (on) + mcr_state |= (UART_MCR_RTS | UART_MCR_DTR); + else + mcr_state &= ~(UART_MCR_RTS | UART_MCR_DTR); + + err = mxuport_set_mcr(port, mcr_state); + if (!err) + mxport->mcr_state = mcr_state; + + mutex_unlock(&mxport->mutex); +} + +static int mxuport_tiocmset(struct tty_struct *tty, unsigned int set, + unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct mxuport_port *mxport = usb_get_serial_port_data(port); + int err; + u8 mcr_state; + + mutex_lock(&mxport->mutex); + mcr_state = mxport->mcr_state; + + if (set & TIOCM_RTS) + mcr_state |= UART_MCR_RTS; + + if (set & TIOCM_DTR) + mcr_state |= UART_MCR_DTR; + + if (clear & TIOCM_RTS) + mcr_state &= ~UART_MCR_RTS; + + if (clear & TIOCM_DTR) + mcr_state &= ~UART_MCR_DTR; + + err = mxuport_set_mcr(port, mcr_state); + if (!err) + mxport->mcr_state = mcr_state; + + mutex_unlock(&mxport->mutex); + + return err; +} + +static int mxuport_tiocmget(struct tty_struct *tty) +{ + struct mxuport_port *mxport; + struct usb_serial_port *port = tty->driver_data; + unsigned int result; + unsigned long flags; + unsigned int msr; + unsigned int mcr; + + mxport = usb_get_serial_port_data(port); + + mutex_lock(&mxport->mutex); + spin_lock_irqsave(&mxport->spinlock, flags); + + msr = mxport->msr_state; + mcr = mxport->mcr_state; + + spin_unlock_irqrestore(&mxport->spinlock, flags); + mutex_unlock(&mxport->mutex); + + result = (((mcr & UART_MCR_DTR) ? TIOCM_DTR : 0) | /* 0x002 */ + ((mcr & UART_MCR_RTS) ? TIOCM_RTS : 0) | /* 0x004 */ + ((msr & UART_MSR_CTS) ? TIOCM_CTS : 0) | /* 0x020 */ + ((msr & UART_MSR_DCD) ? TIOCM_CAR : 0) | /* 0x040 */ + ((msr & UART_MSR_RI) ? TIOCM_RI : 0) | /* 0x080 */ + ((msr & UART_MSR_DSR) ? TIOCM_DSR : 0)); /* 0x100 */ + + dev_dbg(&port->dev, "%s - 0x%04x\n", __func__, result); + + return result; +} + +static int mxuport_set_termios_flow(struct tty_struct *tty, + struct ktermios *old_termios, + struct usb_serial_port *port, + struct usb_serial *serial) +{ + u8 xon = START_CHAR(tty); + u8 xoff = STOP_CHAR(tty); + int enable; + int err; + u8 *buf; + u8 rts; + + buf = kmalloc(2, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + /* S/W flow control settings */ + if (I_IXOFF(tty) || I_IXON(tty)) { + enable = 1; + buf[0] = xon; + buf[1] = xoff; + + err = mxuport_send_ctrl_data_urb(serial, RQ_VENDOR_SET_CHARS, + 0, port->port_number, + buf, 2); + if (err) + goto out; + + dev_dbg(&port->dev, "%s - XON = 0x%02x, XOFF = 0x%02x\n", + __func__, xon, xoff); + } else { + enable = 0; + } + + err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_XONXOFF, + enable, port->port_number); + if (err) + goto out; + + rts = MX_RTS_NO_CHANGE; + + /* H/W flow control settings */ + if (!old_termios || + C_CRTSCTS(tty) != (old_termios->c_cflag & CRTSCTS)) { + if (C_CRTSCTS(tty)) + rts = MX_RTS_HW; + else + rts = MX_RTS_ENABLE; + } + + if (C_BAUD(tty)) { + if (old_termios && (old_termios->c_cflag & CBAUD) == B0) { + /* Raise DTR and RTS */ + if (C_CRTSCTS(tty)) + rts = MX_RTS_HW; + else + rts = MX_RTS_ENABLE; + mxuport_set_dtr(port, 1); + } + } else { + /* Drop DTR and RTS */ + rts = MX_RTS_DISABLE; + mxuport_set_dtr(port, 0); + } + + if (rts != MX_RTS_NO_CHANGE) + err = mxuport_set_rts(port, rts); + +out: + kfree(buf); + return err; +} + +static void mxuport_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old_termios) +{ + struct usb_serial *serial = port->serial; + u8 *buf; + u8 data_bits; + u8 stop_bits; + u8 parity; + int baud; + int err; + + if (old_termios && + !tty_termios_hw_change(&tty->termios, old_termios) && + tty->termios.c_iflag == old_termios->c_iflag) { + dev_dbg(&port->dev, "%s - nothing to change\n", __func__); + return; + } + + buf = kmalloc(4, GFP_KERNEL); + if (!buf) + return; + + /* Set data bit of termios */ + switch (C_CSIZE(tty)) { + case CS5: + data_bits = MX_WORDLENGTH_5; + break; + case CS6: + data_bits = MX_WORDLENGTH_6; + break; + case CS7: + data_bits = MX_WORDLENGTH_7; + break; + case CS8: + default: + data_bits = MX_WORDLENGTH_8; + break; + } + + /* Set parity of termios */ + if (C_PARENB(tty)) { + if (C_CMSPAR(tty)) { + if (C_PARODD(tty)) + parity = MX_PARITY_MARK; + else + parity = MX_PARITY_SPACE; + } else { + if (C_PARODD(tty)) + parity = MX_PARITY_ODD; + else + parity = MX_PARITY_EVEN; + } + } else { + parity = MX_PARITY_NONE; + } + + /* Set stop bit of termios */ + if (C_CSTOPB(tty)) + stop_bits = MX_STOP_BITS_2; + else + stop_bits = MX_STOP_BITS_1; + + buf[0] = data_bits; + buf[1] = parity; + buf[2] = stop_bits; + buf[3] = 0; + + err = mxuport_send_ctrl_data_urb(serial, RQ_VENDOR_SET_LINE, + 0, port->port_number, buf, 4); + if (err) + goto out; + + err = mxuport_set_termios_flow(tty, old_termios, port, serial); + if (err) + goto out; + + baud = tty_get_baud_rate(tty); + if (!baud) + baud = 9600; + + /* Note: Little Endian */ + put_unaligned_le32(baud, buf); + + err = mxuport_send_ctrl_data_urb(serial, RQ_VENDOR_SET_BAUD, + 0, port->port_number, + buf, 4); + if (err) + goto out; + + dev_dbg(&port->dev, "baud_rate : %d\n", baud); + dev_dbg(&port->dev, "data_bits : %d\n", data_bits); + dev_dbg(&port->dev, "parity : %d\n", parity); + dev_dbg(&port->dev, "stop_bits : %d\n", stop_bits); + +out: + kfree(buf); +} + +/* + * Determine how many ports this device has dynamically. It will be + * called after the probe() callback is called, but before attach(). + */ +static int mxuport_calc_num_ports(struct usb_serial *serial) +{ + unsigned long features = (unsigned long)usb_get_serial_data(serial); + + if (features & MX_UPORT_2_PORT) + return 2; + if (features & MX_UPORT_4_PORT) + return 4; + if (features & MX_UPORT_8_PORT) + return 8; + if (features & MX_UPORT_16_PORT) + return 16; + + return 0; +} + +/* Get the version of the firmware currently running. */ +static int mxuport_get_fw_version(struct usb_serial *serial, u32 *version) +{ + u8 *ver_buf; + int err; + + ver_buf = kzalloc(4, GFP_KERNEL); + if (!ver_buf) + return -ENOMEM; + + /* Get firmware version from SDRAM */ + err = mxuport_recv_ctrl_urb(serial, RQ_VENDOR_GET_VERSION, 0, 0, + ver_buf, 4); + if (err != 4) { + err = -EIO; + goto out; + } + + *version = (ver_buf[0] << 16) | (ver_buf[1] << 8) | ver_buf[2]; + err = 0; +out: + kfree(ver_buf); + return err; +} + +/* Given a firmware blob, download it to the device. */ +static int mxuport_download_fw(struct usb_serial *serial, + const struct firmware *fw_p) +{ + u8 *fw_buf; + size_t txlen; + size_t fwidx; + int err; + + fw_buf = kmalloc(DOWN_BLOCK_SIZE, GFP_KERNEL); + if (!fw_buf) + return -ENOMEM; + + dev_dbg(&serial->interface->dev, "Starting firmware download...\n"); + err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_START_FW_DOWN, 0, 0); + if (err) + goto out; + + fwidx = 0; + do { + txlen = min_t(size_t, (fw_p->size - fwidx), DOWN_BLOCK_SIZE); + + memcpy(fw_buf, &fw_p->data[fwidx], txlen); + err = mxuport_send_ctrl_data_urb(serial, RQ_VENDOR_FW_DATA, + 0, 0, fw_buf, txlen); + if (err) { + mxuport_send_ctrl_urb(serial, RQ_VENDOR_STOP_FW_DOWN, + 0, 0); + goto out; + } + + fwidx += txlen; + usleep_range(1000, 2000); + + } while (fwidx < fw_p->size); + + msleep(1000); + err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_STOP_FW_DOWN, 0, 0); + if (err) + goto out; + + msleep(1000); + err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_QUERY_FW_READY, 0, 0); + +out: + kfree(fw_buf); + return err; +} + +static int mxuport_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + u16 productid = le16_to_cpu(serial->dev->descriptor.idProduct); + const struct firmware *fw_p = NULL; + u32 version; + int local_ver; + char buf[32]; + int err; + + /* Load our firmware */ + err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_QUERY_FW_CONFIG, 0, 0); + if (err) { + mxuport_send_ctrl_urb(serial, RQ_VENDOR_RESET_DEVICE, 0, 0); + return err; + } + + err = mxuport_get_fw_version(serial, &version); + if (err < 0) + return err; + + dev_dbg(&serial->interface->dev, "Device firmware version v%x.%x.%x\n", + (version & 0xff0000) >> 16, + (version & 0xff00) >> 8, + (version & 0xff)); + + snprintf(buf, sizeof(buf) - 1, "moxa/moxa-%04x.fw", productid); + + err = request_firmware(&fw_p, buf, &serial->interface->dev); + if (err) { + dev_warn(&serial->interface->dev, "Firmware %s not found\n", + buf); + + /* Use the firmware already in the device */ + err = 0; + } else { + local_ver = ((fw_p->data[VER_ADDR_1] << 16) | + (fw_p->data[VER_ADDR_2] << 8) | + fw_p->data[VER_ADDR_3]); + dev_dbg(&serial->interface->dev, + "Available firmware version v%x.%x.%x\n", + fw_p->data[VER_ADDR_1], fw_p->data[VER_ADDR_2], + fw_p->data[VER_ADDR_3]); + if (local_ver > version) { + err = mxuport_download_fw(serial, fw_p); + if (err) + goto out; + err = mxuport_get_fw_version(serial, &version); + if (err < 0) + goto out; + } + } + + dev_info(&serial->interface->dev, + "Using device firmware version v%x.%x.%x\n", + (version & 0xff0000) >> 16, + (version & 0xff00) >> 8, + (version & 0xff)); + + /* + * Contains the features of this hardware. Store away for + * later use, eg, number of ports. + */ + usb_set_serial_data(serial, (void *)id->driver_info); +out: + if (fw_p) + release_firmware(fw_p); + return err; +} + + +static int mxuport_port_probe(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct mxuport_port *mxport; + int err; + + mxport = devm_kzalloc(&port->dev, sizeof(struct mxuport_port), + GFP_KERNEL); + if (!mxport) + return -ENOMEM; + + mutex_init(&mxport->mutex); + spin_lock_init(&mxport->spinlock); + + /* Set the port private data */ + usb_set_serial_port_data(port, mxport); + + /* Set FIFO (Enable) */ + err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_FIFO_DISABLE, + 0, port->port_number); + if (err) + return err; + + /* Set transmission mode (Hi-Performance) */ + err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_HIGH_PERFOR, + 0, port->port_number); + if (err) + return err; + + /* Set interface (RS-232) */ + err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_INTERFACE, + MX_INT_RS232, + port->port_number); + if (err) + return err; + + return 0; +} + +static int mxuport_alloc_write_urb(struct usb_serial *serial, + struct usb_serial_port *port, + struct usb_serial_port *port0, + int j) +{ + struct usb_device *dev = interface_to_usbdev(serial->interface); + + set_bit(j, &port->write_urbs_free); + port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL); + if (!port->write_urbs[j]) + return -ENOMEM; + + port->bulk_out_buffers[j] = kmalloc(port0->bulk_out_size, GFP_KERNEL); + if (!port->bulk_out_buffers[j]) + return -ENOMEM; + + usb_fill_bulk_urb(port->write_urbs[j], dev, + usb_sndbulkpipe(dev, port->bulk_out_endpointAddress), + port->bulk_out_buffers[j], + port->bulk_out_size, + serial->type->write_bulk_callback, + port); + return 0; +} + + +static int mxuport_alloc_write_urbs(struct usb_serial *serial, + struct usb_serial_port *port, + struct usb_serial_port *port0) +{ + int j; + int ret; + + for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) { + ret = mxuport_alloc_write_urb(serial, port, port0, j); + if (ret) + return ret; + } + return 0; +} + + +static int mxuport_attach(struct usb_serial *serial) +{ + struct usb_serial_port *port0 = serial->port[0]; + struct usb_serial_port *port1 = serial->port[1]; + struct usb_serial_port *port; + int err; + int i; + int j; + + /* + * Throw away all but the first allocated write URBs so we can + * set them up again to fit the multiplexing scheme. + */ + for (i = 1; i < serial->num_bulk_out; ++i) { + port = serial->port[i]; + for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) { + usb_free_urb(port->write_urbs[j]); + kfree(port->bulk_out_buffers[j]); + port->write_urbs[j] = NULL; + port->bulk_out_buffers[j] = NULL; + } + port->write_urbs_free = 0; + } + + /* + * All write data is sent over the first bulk out endpoint, + * with an added header to indicate the port. Allocate URBs + * for each port to the first bulk out endpoint. + */ + for (i = 1; i < serial->num_ports; ++i) { + port = serial->port[i]; + port->bulk_out_size = port0->bulk_out_size; + port->bulk_out_endpointAddress = + port0->bulk_out_endpointAddress; + + err = mxuport_alloc_write_urbs(serial, port, port0); + if (err) + return err; + + port->write_urb = port->write_urbs[0]; + port->bulk_out_buffer = port->bulk_out_buffers[0]; + + /* + * Ensure each port has a fifo. The framework only + * allocates a fifo to ports with a bulk out endpoint, + * where as we need one for every port. + */ + if (!kfifo_initialized(&port->write_fifo)) { + err = kfifo_alloc(&port->write_fifo, PAGE_SIZE, + GFP_KERNEL); + if (err) + return err; + } + } + + /* + * All data from the ports is received on the first bulk in + * endpoint, with a multiplex header. The second bulk in is + * used for events. + * + * Start to read from the device. + */ + err = usb_serial_generic_submit_read_urbs(port0, GFP_KERNEL); + if (err) + return err; + + err = usb_serial_generic_submit_read_urbs(port1, GFP_KERNEL); + if (err) { + usb_serial_generic_close(port0); + return err; + } + + return 0; +} + +static int mxuport_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct mxuport_port *mxport = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + int err; + + /* Set receive host (enable) */ + err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_RX_HOST_EN, + 1, port->port_number); + if (err) + return err; + + err = mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_OPEN, + 1, port->port_number); + if (err) { + mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_RX_HOST_EN, + 0, port->port_number); + return err; + } + + /* Initial port termios */ + if (tty) + mxuport_set_termios(tty, port, NULL); + + /* + * TODO: use RQ_VENDOR_GET_MSR, once we know what it + * returns. + */ + mxport->msr_state = 0; + + return err; +} + +static void mxuport_close(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + + mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_OPEN, 0, + port->port_number); + + mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_RX_HOST_EN, 0, + port->port_number); +} + +/* Send a break to the port. */ +static void mxuport_break_ctl(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + int enable; + + if (break_state == -1) { + enable = 1; + dev_dbg(&port->dev, "%s - sending break\n", __func__); + } else { + enable = 0; + dev_dbg(&port->dev, "%s - clearing break\n", __func__); + } + + mxuport_send_ctrl_urb(serial, RQ_VENDOR_SET_BREAK, + enable, port->port_number); +} + +static int mxuport_resume(struct usb_serial *serial) +{ + struct usb_serial_port *port; + int c = 0; + int i; + int r; + + for (i = 0; i < 2; i++) { + port = serial->port[i]; + + r = usb_serial_generic_submit_read_urbs(port, GFP_NOIO); + if (r < 0) + c++; + } + + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) + continue; + + r = usb_serial_generic_write_start(port, GFP_NOIO); + if (r < 0) + c++; + } + + return c ? -EIO : 0; +} + +static struct usb_serial_driver mxuport_device = { + .driver = { + .owner = THIS_MODULE, + .name = "mxuport", + }, + .description = "MOXA UPort", + .id_table = mxuport_idtable, + .num_ports = 0, + .probe = mxuport_probe, + .port_probe = mxuport_port_probe, + .attach = mxuport_attach, + .calc_num_ports = mxuport_calc_num_ports, + .open = mxuport_open, + .close = mxuport_close, + .set_termios = mxuport_set_termios, + .break_ctl = mxuport_break_ctl, + .tx_empty = mxuport_tx_empty, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, + .throttle = mxuport_throttle, + .unthrottle = mxuport_unthrottle, + .tiocmget = mxuport_tiocmget, + .tiocmset = mxuport_tiocmset, + .dtr_rts = mxuport_dtr_rts, + .process_read_urb = mxuport_process_read_urb, + .prepare_write_buffer = mxuport_prepare_write_buffer, + .resume = mxuport_resume, +}; + +static struct usb_serial_driver *const serial_drivers[] = { + &mxuport_device, NULL +}; + +module_usb_serial_driver(serial_drivers, mxuport_idtable); + +MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>"); +MODULE_AUTHOR("<support@moxa.com>"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/navman.c b/kernel/drivers/usb/serial/navman.c new file mode 100644 index 000000000..2a97cdc07 --- /dev/null +++ b/kernel/drivers/usb/serial/navman.c @@ -0,0 +1,118 @@ +/* + * Navman Serial USB driver + * + * Copyright (C) 2006 Greg Kroah-Hartman <gregkh@suse.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * TODO: + * Add termios method that uses copy_hw but also kills all echo + * flags as the navman is rx only so cannot echo. + */ + +#include <linux/gfp.h> +#include <linux/kernel.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(0x0a99, 0x0001) }, /* Talon Technology device */ + { USB_DEVICE(0x0df7, 0x0900) }, /* Mobile Action i-gotU */ + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static void navman_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + int result; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", + __func__, status); + goto exit; + } + + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); + + if (urb->actual_length) { + tty_insert_flip_string(&port->port, data, urb->actual_length); + tty_flip_buffer_push(&port->port); + } + +exit: + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) + dev_err(&urb->dev->dev, + "%s - Error %d submitting interrupt urb\n", + __func__, result); +} + +static int navman_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + int result = 0; + + if (port->interrupt_in_urb) { + dev_dbg(&port->dev, "%s - adding interrupt input for treo\n", + __func__); + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result) + dev_err(&port->dev, + "%s - failed submitting interrupt urb, error %d\n", + __func__, result); + } + return result; +} + +static void navman_close(struct usb_serial_port *port) +{ + usb_kill_urb(port->interrupt_in_urb); +} + +static int navman_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + /* + * This device can't write any data, only read from the device + */ + return -EOPNOTSUPP; +} + +static struct usb_serial_driver navman_device = { + .driver = { + .owner = THIS_MODULE, + .name = "navman", + }, + .id_table = id_table, + .num_ports = 1, + .open = navman_open, + .close = navman_close, + .write = navman_write, + .read_int_callback = navman_read_int_callback, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &navman_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/omninet.c b/kernel/drivers/usb/serial/omninet.c new file mode 100644 index 000000000..f6c6900bc --- /dev/null +++ b/kernel/drivers/usb/serial/omninet.c @@ -0,0 +1,258 @@ +/* + * USB ZyXEL omni.net LCD PLUS driver + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * See Documentation/usb/usb-serial.txt for more information on using this + * driver + * + * Please report both successes and troubles to the author at omninet@kroah.com + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +#define DRIVER_AUTHOR "Alessandro Zummo" +#define DRIVER_DESC "USB ZyXEL omni.net LCD PLUS Driver" + +#define ZYXEL_VENDOR_ID 0x0586 +#define ZYXEL_OMNINET_ID 0x1000 +/* This one seems to be a re-branded ZyXEL device */ +#define BT_IGNITIONPRO_ID 0x2000 + +/* function prototypes */ +static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port); +static void omninet_process_read_urb(struct urb *urb); +static void omninet_write_bulk_callback(struct urb *urb); +static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); +static int omninet_write_room(struct tty_struct *tty); +static void omninet_disconnect(struct usb_serial *serial); +static int omninet_port_probe(struct usb_serial_port *port); +static int omninet_port_remove(struct usb_serial_port *port); + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) }, + { USB_DEVICE(ZYXEL_VENDOR_ID, BT_IGNITIONPRO_ID) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_serial_driver zyxel_omninet_device = { + .driver = { + .owner = THIS_MODULE, + .name = "omninet", + }, + .description = "ZyXEL - omni.net lcd plus usb", + .id_table = id_table, + .num_ports = 1, + .port_probe = omninet_port_probe, + .port_remove = omninet_port_remove, + .open = omninet_open, + .write = omninet_write, + .write_room = omninet_write_room, + .write_bulk_callback = omninet_write_bulk_callback, + .process_read_urb = omninet_process_read_urb, + .disconnect = omninet_disconnect, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &zyxel_omninet_device, NULL +}; + + +/* + * The protocol. + * + * The omni.net always exchange 64 bytes of data with the host. The first + * four bytes are the control header. + * + * oh_seq is a sequence number. Don't know if/how it's used. + * oh_len is the length of the data bytes in the packet. + * oh_xxx Bit-mapped, related to handshaking and status info. + * I normally set it to 0x03 in transmitted frames. + * 7: Active when the TA is in a CONNECTed state. + * 6: unknown + * 5: handshaking, unknown + * 4: handshaking, unknown + * 3: unknown, usually 0 + * 2: unknown, usually 0 + * 1: handshaking, unknown, usually set to 1 in transmitted frames + * 0: handshaking, unknown, usually set to 1 in transmitted frames + * oh_pad Probably a pad byte. + * + * After the header you will find data bytes if oh_len was greater than zero. + */ +struct omninet_header { + __u8 oh_seq; + __u8 oh_len; + __u8 oh_xxx; + __u8 oh_pad; +}; + +struct omninet_data { + __u8 od_outseq; /* Sequence number for bulk_out URBs */ +}; + +static int omninet_port_probe(struct usb_serial_port *port) +{ + struct omninet_data *od; + + od = kzalloc(sizeof(*od), GFP_KERNEL); + if (!od) + return -ENOMEM; + + usb_set_serial_port_data(port, od); + + return 0; +} + +static int omninet_port_remove(struct usb_serial_port *port) +{ + struct omninet_data *od; + + od = usb_get_serial_port_data(port); + kfree(od); + + return 0; +} + +static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct usb_serial_port *wport; + + wport = serial->port[1]; + tty_port_tty_set(&wport->port, tty); + + return usb_serial_generic_open(tty, port); +} + +#define OMNINET_HEADERLEN 4 +#define OMNINET_BULKOUTSIZE 64 +#define OMNINET_PAYLOADSIZE (OMNINET_BULKOUTSIZE - OMNINET_HEADERLEN) + +static void omninet_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + const struct omninet_header *hdr = urb->transfer_buffer; + const unsigned char *data; + size_t data_len; + + if (urb->actual_length <= OMNINET_HEADERLEN || !hdr->oh_len) + return; + + data = (char *)urb->transfer_buffer + OMNINET_HEADERLEN; + data_len = min_t(size_t, urb->actual_length - OMNINET_HEADERLEN, + hdr->oh_len); + tty_insert_flip_string(&port->port, data, data_len); + tty_flip_buffer_push(&port->port); +} + +static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + struct usb_serial *serial = port->serial; + struct usb_serial_port *wport = serial->port[1]; + + struct omninet_data *od = usb_get_serial_port_data(port); + struct omninet_header *header = (struct omninet_header *) + wport->write_urb->transfer_buffer; + + int result; + + if (count == 0) { + dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__); + return 0; + } + + if (!test_and_clear_bit(0, &port->write_urbs_free)) { + dev_dbg(&port->dev, "%s - already writing\n", __func__); + return 0; + } + + count = (count > OMNINET_PAYLOADSIZE) ? OMNINET_PAYLOADSIZE : count; + + memcpy(wport->write_urb->transfer_buffer + OMNINET_HEADERLEN, + buf, count); + + usb_serial_debug_data(&port->dev, __func__, count, + wport->write_urb->transfer_buffer); + + header->oh_seq = od->od_outseq++; + header->oh_len = count; + header->oh_xxx = 0x03; + header->oh_pad = 0x00; + + /* send the data out the bulk port, always 64 bytes */ + wport->write_urb->transfer_buffer_length = OMNINET_BULKOUTSIZE; + + result = usb_submit_urb(wport->write_urb, GFP_ATOMIC); + if (result) { + set_bit(0, &wport->write_urbs_free); + dev_err_console(port, + "%s - failed submitting write urb, error %d\n", + __func__, result); + } else + result = count; + + return result; +} + + +static int omninet_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + struct usb_serial_port *wport = serial->port[1]; + + int room = 0; /* Default: no room */ + + if (test_bit(0, &wport->write_urbs_free)) + room = wport->bulk_out_size - OMNINET_HEADERLEN; + + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); + + return room; +} + +static void omninet_write_bulk_callback(struct urb *urb) +{ +/* struct omninet_header *header = (struct omninet_header *) + urb->transfer_buffer; */ + struct usb_serial_port *port = urb->context; + int status = urb->status; + + set_bit(0, &port->write_urbs_free); + if (status) { + dev_dbg(&port->dev, "%s - nonzero write bulk status received: %d\n", + __func__, status); + return; + } + + usb_serial_port_softint(port); +} + + +static void omninet_disconnect(struct usb_serial *serial) +{ + struct usb_serial_port *wport = serial->port[1]; + + usb_kill_urb(wport->write_urb); +} + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/opticon.c b/kernel/drivers/usb/serial/opticon.c new file mode 100644 index 000000000..4b7bfb394 --- /dev/null +++ b/kernel/drivers/usb/serial/opticon.c @@ -0,0 +1,437 @@ +/* + * Opticon USB barcode to serial driver + * + * Copyright (C) 2011 - 2012 Johan Hovold <jhovold@gmail.com> + * Copyright (C) 2011 Martin Jansen <martin.jansen@opticon.com> + * Copyright (C) 2008 - 2009 Greg Kroah-Hartman <gregkh@suse.de> + * Copyright (C) 2008 - 2009 Novell Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/slab.h> +#include <linux/tty_flip.h> +#include <linux/serial.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/uaccess.h> + +#define CONTROL_RTS 0x02 +#define RESEND_CTS_STATE 0x03 + +/* max number of write urbs in flight */ +#define URB_UPPER_LIMIT 8 + +/* This driver works for the Opticon 1D barcode reader + * an examples of 1D barcode types are EAN, UPC, Code39, IATA etc.. */ +#define DRIVER_DESC "Opticon USB barcode to serial driver (1D)" + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(0x065a, 0x0009) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* This structure holds all of the individual device information */ +struct opticon_private { + spinlock_t lock; /* protects the following flags */ + bool rts; + bool cts; + int outstanding_urbs; +}; + + +static void opticon_process_data_packet(struct usb_serial_port *port, + const unsigned char *buf, size_t len) +{ + tty_insert_flip_string(&port->port, buf, len); + tty_flip_buffer_push(&port->port); +} + +static void opticon_process_status_packet(struct usb_serial_port *port, + const unsigned char *buf, size_t len) +{ + struct opticon_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (buf[0] == 0x00) + priv->cts = false; + else + priv->cts = true; + spin_unlock_irqrestore(&priv->lock, flags); +} + +static void opticon_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + const unsigned char *hdr = urb->transfer_buffer; + const unsigned char *data = hdr + 2; + size_t data_len = urb->actual_length - 2; + + if (urb->actual_length <= 2) { + dev_dbg(&port->dev, "malformed packet received: %d bytes\n", + urb->actual_length); + return; + } + /* + * Data from the device comes with a 2 byte header: + * + * <0x00><0x00>data... + * This is real data to be sent to the tty layer + * <0x00><0x01>level + * This is a CTS level change, the third byte is the CTS + * value (0 for low, 1 for high). + */ + if ((hdr[0] == 0x00) && (hdr[1] == 0x00)) { + opticon_process_data_packet(port, data, data_len); + } else if ((hdr[0] == 0x00) && (hdr[1] == 0x01)) { + opticon_process_status_packet(port, data, data_len); + } else { + dev_dbg(&port->dev, "unknown packet received: %02x %02x\n", + hdr[0], hdr[1]); + } +} + +static int send_control_msg(struct usb_serial_port *port, u8 requesttype, + u8 val) +{ + struct usb_serial *serial = port->serial; + int retval; + u8 *buffer; + + buffer = kzalloc(1, GFP_KERNEL); + if (!buffer) + return -ENOMEM; + + buffer[0] = val; + /* Send the message to the vendor control endpoint + * of the connected device */ + retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + requesttype, + USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, + 0, 0, buffer, 1, 0); + kfree(buffer); + + if (retval < 0) + return retval; + + return 0; +} + +static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct opticon_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + int res; + + spin_lock_irqsave(&priv->lock, flags); + priv->rts = false; + spin_unlock_irqrestore(&priv->lock, flags); + + /* Clear RTS line */ + send_control_msg(port, CONTROL_RTS, 0); + + /* clear the halt status of the endpoint */ + usb_clear_halt(port->serial->dev, port->read_urb->pipe); + + res = usb_serial_generic_open(tty, port); + if (!res) + return res; + + /* Request CTS line state, sometimes during opening the current + * CTS state can be missed. */ + send_control_msg(port, RESEND_CTS_STATE, 1); + + return res; +} + +static void opticon_write_control_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct opticon_private *priv = usb_get_serial_port_data(port); + int status = urb->status; + unsigned long flags; + + /* free up the transfer buffer, as usb_free_urb() does not do this */ + kfree(urb->transfer_buffer); + + /* setup packet may be set if we're using it for writing */ + kfree(urb->setup_packet); + + if (status) + dev_dbg(&port->dev, + "%s - non-zero urb status received: %d\n", + __func__, status); + + spin_lock_irqsave(&priv->lock, flags); + --priv->outstanding_urbs; + spin_unlock_irqrestore(&priv->lock, flags); + + usb_serial_port_softint(port); +} + +static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + struct opticon_private *priv = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + struct urb *urb; + unsigned char *buffer; + unsigned long flags; + int status; + struct usb_ctrlrequest *dr; + + spin_lock_irqsave(&priv->lock, flags); + if (priv->outstanding_urbs > URB_UPPER_LIMIT) { + spin_unlock_irqrestore(&priv->lock, flags); + dev_dbg(&port->dev, "%s - write limit hit\n", __func__); + return 0; + } + priv->outstanding_urbs++; + spin_unlock_irqrestore(&priv->lock, flags); + + buffer = kmalloc(count, GFP_ATOMIC); + if (!buffer) { + count = -ENOMEM; + goto error_no_buffer; + } + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + count = -ENOMEM; + goto error_no_urb; + } + + memcpy(buffer, buf, count); + + usb_serial_debug_data(&port->dev, __func__, count, buffer); + + /* The connected devices do not have a bulk write endpoint, + * to transmit data to de barcode device the control endpoint is used */ + dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC); + if (!dr) { + count = -ENOMEM; + goto error_no_dr; + } + + dr->bRequestType = USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT; + dr->bRequest = 0x01; + dr->wValue = 0; + dr->wIndex = 0; + dr->wLength = cpu_to_le16(count); + + usb_fill_control_urb(urb, serial->dev, + usb_sndctrlpipe(serial->dev, 0), + (unsigned char *)dr, buffer, count, + opticon_write_control_callback, port); + + /* send it down the pipe */ + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status) { + dev_err(&port->dev, + "%s - usb_submit_urb(write endpoint) failed status = %d\n", + __func__, status); + count = status; + goto error; + } + + /* we are done with this urb, so let the host driver + * really free it when it is finished with it */ + usb_free_urb(urb); + + return count; +error: + kfree(dr); +error_no_dr: + usb_free_urb(urb); +error_no_urb: + kfree(buffer); +error_no_buffer: + spin_lock_irqsave(&priv->lock, flags); + --priv->outstanding_urbs; + spin_unlock_irqrestore(&priv->lock, flags); + return count; +} + +static int opticon_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct opticon_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + /* + * We really can take almost anything the user throws at us + * but let's pick a nice big number to tell the tty + * layer that we have lots of free space, unless we don't. + */ + spin_lock_irqsave(&priv->lock, flags); + if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) { + spin_unlock_irqrestore(&priv->lock, flags); + dev_dbg(&port->dev, "%s - write limit hit\n", __func__); + return 0; + } + spin_unlock_irqrestore(&priv->lock, flags); + + return 2048; +} + +static int opticon_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct opticon_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + int result = 0; + + spin_lock_irqsave(&priv->lock, flags); + if (priv->rts) + result |= TIOCM_RTS; + if (priv->cts) + result |= TIOCM_CTS; + spin_unlock_irqrestore(&priv->lock, flags); + + dev_dbg(&port->dev, "%s - %x\n", __func__, result); + return result; +} + +static int opticon_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct opticon_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + bool rts; + bool changed = false; + int ret; + + /* We only support RTS so we only handle that */ + spin_lock_irqsave(&priv->lock, flags); + + rts = priv->rts; + if (set & TIOCM_RTS) + priv->rts = true; + if (clear & TIOCM_RTS) + priv->rts = false; + changed = rts ^ priv->rts; + spin_unlock_irqrestore(&priv->lock, flags); + + if (!changed) + return 0; + + ret = send_control_msg(port, CONTROL_RTS, !rts); + if (ret) + return usb_translate_errors(ret); + + return 0; +} + +static int get_serial_info(struct usb_serial_port *port, + struct serial_struct __user *serial) +{ + struct serial_struct tmp; + + if (!serial) + return -EFAULT; + + memset(&tmp, 0x00, sizeof(tmp)); + + /* fake emulate a 16550 uart to make userspace code happy */ + tmp.type = PORT_16550A; + tmp.line = port->minor; + tmp.port = 0; + tmp.irq = 0; + tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; + tmp.xmit_fifo_size = 1024; + tmp.baud_base = 9600; + tmp.close_delay = 5*HZ; + tmp.closing_wait = 30*HZ; + + if (copy_to_user(serial, &tmp, sizeof(*serial))) + return -EFAULT; + return 0; +} + +static int opticon_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + + switch (cmd) { + case TIOCGSERIAL: + return get_serial_info(port, + (struct serial_struct __user *)arg); + } + + return -ENOIOCTLCMD; +} + +static int opticon_startup(struct usb_serial *serial) +{ + if (!serial->num_bulk_in) { + dev_err(&serial->dev->dev, "no bulk in endpoint\n"); + return -ENODEV; + } + + return 0; +} + +static int opticon_port_probe(struct usb_serial_port *port) +{ + struct opticon_private *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + + usb_set_serial_port_data(port, priv); + + return 0; +} + +static int opticon_port_remove(struct usb_serial_port *port) +{ + struct opticon_private *priv = usb_get_serial_port_data(port); + + kfree(priv); + + return 0; +} + +static struct usb_serial_driver opticon_device = { + .driver = { + .owner = THIS_MODULE, + .name = "opticon", + }, + .id_table = id_table, + .num_ports = 1, + .bulk_in_size = 256, + .attach = opticon_startup, + .port_probe = opticon_port_probe, + .port_remove = opticon_port_remove, + .open = opticon_open, + .write = opticon_write, + .write_room = opticon_write_room, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, + .ioctl = opticon_ioctl, + .tiocmget = opticon_tiocmget, + .tiocmset = opticon_tiocmset, + .process_read_urb = opticon_process_read_urb, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &opticon_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/option.c b/kernel/drivers/usb/serial/option.c new file mode 100644 index 000000000..f0c0c5335 --- /dev/null +++ b/kernel/drivers/usb/serial/option.c @@ -0,0 +1,1989 @@ +/* + USB Driver for GSM modems + + Copyright (C) 2005 Matthias Urlichs <smurf@smurf.noris.de> + + This driver is free software; you can redistribute it and/or modify + it under the terms of Version 2 of the GNU General Public License as + published by the Free Software Foundation. + + Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org> + + History: see the git log. + + Work sponsored by: Sigos GmbH, Germany <info@sigos.de> + + This driver exists because the "normal" serial driver doesn't work too well + with GSM modems. Issues: + - data loss -- one single Receive URB is not nearly enough + - nonstandard flow (Option devices) control + - controlling the baud rate doesn't make sense + + This driver is named "option" because the most common device it's + used for is a PC-Card (with an internal OHCI-USB interface, behind + which the GSM interface sits), made by Option Inc. + + Some of the "one port" devices actually exhibit multiple USB instances + on the USB bus. This is not a bug, these ports are used for different + device features. +*/ + +#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>" +#define DRIVER_DESC "USB Driver for GSM modems" + +#include <linux/kernel.h> +#include <linux/jiffies.h> +#include <linux/errno.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/bitops.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include "usb-wwan.h" + +/* Function prototypes */ +static int option_probe(struct usb_serial *serial, + const struct usb_device_id *id); +static int option_attach(struct usb_serial *serial); +static void option_release(struct usb_serial *serial); +static int option_send_setup(struct usb_serial_port *port); +static void option_instat_callback(struct urb *urb); + +/* Vendor and product IDs */ +#define OPTION_VENDOR_ID 0x0AF0 +#define OPTION_PRODUCT_COLT 0x5000 +#define OPTION_PRODUCT_RICOLA 0x6000 +#define OPTION_PRODUCT_RICOLA_LIGHT 0x6100 +#define OPTION_PRODUCT_RICOLA_QUAD 0x6200 +#define OPTION_PRODUCT_RICOLA_QUAD_LIGHT 0x6300 +#define OPTION_PRODUCT_RICOLA_NDIS 0x6050 +#define OPTION_PRODUCT_RICOLA_NDIS_LIGHT 0x6150 +#define OPTION_PRODUCT_RICOLA_NDIS_QUAD 0x6250 +#define OPTION_PRODUCT_RICOLA_NDIS_QUAD_LIGHT 0x6350 +#define OPTION_PRODUCT_COBRA 0x6500 +#define OPTION_PRODUCT_COBRA_BUS 0x6501 +#define OPTION_PRODUCT_VIPER 0x6600 +#define OPTION_PRODUCT_VIPER_BUS 0x6601 +#define OPTION_PRODUCT_GT_MAX_READY 0x6701 +#define OPTION_PRODUCT_FUJI_MODEM_LIGHT 0x6721 +#define OPTION_PRODUCT_FUJI_MODEM_GT 0x6741 +#define OPTION_PRODUCT_FUJI_MODEM_EX 0x6761 +#define OPTION_PRODUCT_KOI_MODEM 0x6800 +#define OPTION_PRODUCT_SCORPION_MODEM 0x6901 +#define OPTION_PRODUCT_ETNA_MODEM 0x7001 +#define OPTION_PRODUCT_ETNA_MODEM_LITE 0x7021 +#define OPTION_PRODUCT_ETNA_MODEM_GT 0x7041 +#define OPTION_PRODUCT_ETNA_MODEM_EX 0x7061 +#define OPTION_PRODUCT_ETNA_KOI_MODEM 0x7100 +#define OPTION_PRODUCT_GTM380_MODEM 0x7201 + +#define HUAWEI_VENDOR_ID 0x12D1 +#define HUAWEI_PRODUCT_E173 0x140C +#define HUAWEI_PRODUCT_E1750 0x1406 +#define HUAWEI_PRODUCT_K4505 0x1464 +#define HUAWEI_PRODUCT_K3765 0x1465 +#define HUAWEI_PRODUCT_K4605 0x14C6 +#define HUAWEI_PRODUCT_E173S6 0x1C07 + +#define QUANTA_VENDOR_ID 0x0408 +#define QUANTA_PRODUCT_Q101 0xEA02 +#define QUANTA_PRODUCT_Q111 0xEA03 +#define QUANTA_PRODUCT_GLX 0xEA04 +#define QUANTA_PRODUCT_GKE 0xEA05 +#define QUANTA_PRODUCT_GLE 0xEA06 + +#define NOVATELWIRELESS_VENDOR_ID 0x1410 + +/* YISO PRODUCTS */ + +#define YISO_VENDOR_ID 0x0EAB +#define YISO_PRODUCT_U893 0xC893 + +/* + * NOVATEL WIRELESS PRODUCTS + * + * Note from Novatel Wireless: + * If your Novatel modem does not work on linux, don't + * change the option module, but check our website. If + * that does not help, contact ddeschepper@nvtl.com +*/ +/* MERLIN EVDO PRODUCTS */ +#define NOVATELWIRELESS_PRODUCT_V640 0x1100 +#define NOVATELWIRELESS_PRODUCT_V620 0x1110 +#define NOVATELWIRELESS_PRODUCT_V740 0x1120 +#define NOVATELWIRELESS_PRODUCT_V720 0x1130 + +/* MERLIN HSDPA/HSPA PRODUCTS */ +#define NOVATELWIRELESS_PRODUCT_U730 0x1400 +#define NOVATELWIRELESS_PRODUCT_U740 0x1410 +#define NOVATELWIRELESS_PRODUCT_U870 0x1420 +#define NOVATELWIRELESS_PRODUCT_XU870 0x1430 +#define NOVATELWIRELESS_PRODUCT_X950D 0x1450 + +/* EXPEDITE PRODUCTS */ +#define NOVATELWIRELESS_PRODUCT_EV620 0x2100 +#define NOVATELWIRELESS_PRODUCT_ES720 0x2110 +#define NOVATELWIRELESS_PRODUCT_E725 0x2120 +#define NOVATELWIRELESS_PRODUCT_ES620 0x2130 +#define NOVATELWIRELESS_PRODUCT_EU730 0x2400 +#define NOVATELWIRELESS_PRODUCT_EU740 0x2410 +#define NOVATELWIRELESS_PRODUCT_EU870D 0x2420 +/* OVATION PRODUCTS */ +#define NOVATELWIRELESS_PRODUCT_MC727 0x4100 +#define NOVATELWIRELESS_PRODUCT_MC950D 0x4400 +/* + * Note from Novatel Wireless: + * All PID in the 5xxx range are currently reserved for + * auto-install CDROMs, and should not be added to this + * module. + * + * #define NOVATELWIRELESS_PRODUCT_U727 0x5010 + * #define NOVATELWIRELESS_PRODUCT_MC727_NEW 0x5100 +*/ +#define NOVATELWIRELESS_PRODUCT_OVMC760 0x6002 +#define NOVATELWIRELESS_PRODUCT_MC780 0x6010 +#define NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED 0x6000 +#define NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED 0x6001 +#define NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED 0x7000 +#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED 0x7001 +#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED3 0x7003 +#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED4 0x7004 +#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED5 0x7005 +#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED6 0x7006 +#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED7 0x7007 +#define NOVATELWIRELESS_PRODUCT_MC996D 0x7030 +#define NOVATELWIRELESS_PRODUCT_MF3470 0x7041 +#define NOVATELWIRELESS_PRODUCT_MC547 0x7042 +#define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED 0x8000 +#define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED 0x8001 +#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED 0x9000 +#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0x9001 +#define NOVATELWIRELESS_PRODUCT_E362 0x9010 +#define NOVATELWIRELESS_PRODUCT_E371 0x9011 +#define NOVATELWIRELESS_PRODUCT_G2 0xA010 +#define NOVATELWIRELESS_PRODUCT_MC551 0xB001 + +/* AMOI PRODUCTS */ +#define AMOI_VENDOR_ID 0x1614 +#define AMOI_PRODUCT_H01 0x0800 +#define AMOI_PRODUCT_H01A 0x7002 +#define AMOI_PRODUCT_H02 0x0802 +#define AMOI_PRODUCT_SKYPEPHONE_S2 0x0407 + +#define DELL_VENDOR_ID 0x413C + +/* Dell modems */ +#define DELL_PRODUCT_5700_MINICARD 0x8114 +#define DELL_PRODUCT_5500_MINICARD 0x8115 +#define DELL_PRODUCT_5505_MINICARD 0x8116 +#define DELL_PRODUCT_5700_EXPRESSCARD 0x8117 +#define DELL_PRODUCT_5510_EXPRESSCARD 0x8118 + +#define DELL_PRODUCT_5700_MINICARD_SPRINT 0x8128 +#define DELL_PRODUCT_5700_MINICARD_TELUS 0x8129 + +#define DELL_PRODUCT_5720_MINICARD_VZW 0x8133 +#define DELL_PRODUCT_5720_MINICARD_SPRINT 0x8134 +#define DELL_PRODUCT_5720_MINICARD_TELUS 0x8135 +#define DELL_PRODUCT_5520_MINICARD_CINGULAR 0x8136 +#define DELL_PRODUCT_5520_MINICARD_GENERIC_L 0x8137 +#define DELL_PRODUCT_5520_MINICARD_GENERIC_I 0x8138 + +#define DELL_PRODUCT_5730_MINICARD_SPRINT 0x8180 +#define DELL_PRODUCT_5730_MINICARD_TELUS 0x8181 +#define DELL_PRODUCT_5730_MINICARD_VZW 0x8182 + +#define DELL_PRODUCT_5800_MINICARD_VZW 0x8195 /* Novatel E362 */ +#define DELL_PRODUCT_5800_V2_MINICARD_VZW 0x8196 /* Novatel E362 */ +#define DELL_PRODUCT_5804_MINICARD_ATT 0x819b /* Novatel E371 */ + +#define KYOCERA_VENDOR_ID 0x0c88 +#define KYOCERA_PRODUCT_KPC650 0x17da +#define KYOCERA_PRODUCT_KPC680 0x180a + +#define ANYDATA_VENDOR_ID 0x16d5 +#define ANYDATA_PRODUCT_ADU_620UW 0x6202 +#define ANYDATA_PRODUCT_ADU_E100A 0x6501 +#define ANYDATA_PRODUCT_ADU_500A 0x6502 + +#define AXESSTEL_VENDOR_ID 0x1726 +#define AXESSTEL_PRODUCT_MV110H 0x1000 + +#define BANDRICH_VENDOR_ID 0x1A8D +#define BANDRICH_PRODUCT_C100_1 0x1002 +#define BANDRICH_PRODUCT_C100_2 0x1003 +#define BANDRICH_PRODUCT_1004 0x1004 +#define BANDRICH_PRODUCT_1005 0x1005 +#define BANDRICH_PRODUCT_1006 0x1006 +#define BANDRICH_PRODUCT_1007 0x1007 +#define BANDRICH_PRODUCT_1008 0x1008 +#define BANDRICH_PRODUCT_1009 0x1009 +#define BANDRICH_PRODUCT_100A 0x100a + +#define BANDRICH_PRODUCT_100B 0x100b +#define BANDRICH_PRODUCT_100C 0x100c +#define BANDRICH_PRODUCT_100D 0x100d +#define BANDRICH_PRODUCT_100E 0x100e + +#define BANDRICH_PRODUCT_100F 0x100f +#define BANDRICH_PRODUCT_1010 0x1010 +#define BANDRICH_PRODUCT_1011 0x1011 +#define BANDRICH_PRODUCT_1012 0x1012 + +#define QUALCOMM_VENDOR_ID 0x05C6 + +#define SIERRA_VENDOR_ID 0x1199 + +#define CMOTECH_VENDOR_ID 0x16d8 +#define CMOTECH_PRODUCT_6001 0x6001 +#define CMOTECH_PRODUCT_CMU_300 0x6002 +#define CMOTECH_PRODUCT_6003 0x6003 +#define CMOTECH_PRODUCT_6004 0x6004 +#define CMOTECH_PRODUCT_6005 0x6005 +#define CMOTECH_PRODUCT_CGU_628A 0x6006 +#define CMOTECH_PRODUCT_CHE_628S 0x6007 +#define CMOTECH_PRODUCT_CMU_301 0x6008 +#define CMOTECH_PRODUCT_CHU_628 0x6280 +#define CMOTECH_PRODUCT_CHU_628S 0x6281 +#define CMOTECH_PRODUCT_CDU_680 0x6803 +#define CMOTECH_PRODUCT_CDU_685A 0x6804 +#define CMOTECH_PRODUCT_CHU_720S 0x7001 +#define CMOTECH_PRODUCT_7002 0x7002 +#define CMOTECH_PRODUCT_CHU_629K 0x7003 +#define CMOTECH_PRODUCT_7004 0x7004 +#define CMOTECH_PRODUCT_7005 0x7005 +#define CMOTECH_PRODUCT_CGU_629 0x7006 +#define CMOTECH_PRODUCT_CHU_629S 0x700a +#define CMOTECH_PRODUCT_CHU_720I 0x7211 +#define CMOTECH_PRODUCT_7212 0x7212 +#define CMOTECH_PRODUCT_7213 0x7213 +#define CMOTECH_PRODUCT_7251 0x7251 +#define CMOTECH_PRODUCT_7252 0x7252 +#define CMOTECH_PRODUCT_7253 0x7253 + +#define TELIT_VENDOR_ID 0x1bc7 +#define TELIT_PRODUCT_UC864E 0x1003 +#define TELIT_PRODUCT_UC864G 0x1004 +#define TELIT_PRODUCT_CC864_DUAL 0x1005 +#define TELIT_PRODUCT_CC864_SINGLE 0x1006 +#define TELIT_PRODUCT_DE910_DUAL 0x1010 +#define TELIT_PRODUCT_UE910_V2 0x1012 +#define TELIT_PRODUCT_LE920 0x1200 +#define TELIT_PRODUCT_LE910 0x1201 + +/* ZTE PRODUCTS */ +#define ZTE_VENDOR_ID 0x19d2 +#define ZTE_PRODUCT_MF622 0x0001 +#define ZTE_PRODUCT_MF628 0x0015 +#define ZTE_PRODUCT_MF626 0x0031 +#define ZTE_PRODUCT_AC2726 0xfff1 +#define ZTE_PRODUCT_MG880 0xfffd +#define ZTE_PRODUCT_CDMA_TECH 0xfffe +#define ZTE_PRODUCT_AC8710T 0xffff +#define ZTE_PRODUCT_MC2718 0xffe8 +#define ZTE_PRODUCT_AD3812 0xffeb +#define ZTE_PRODUCT_MC2716 0xffed + +#define BENQ_VENDOR_ID 0x04a5 +#define BENQ_PRODUCT_H10 0x4068 + +#define DLINK_VENDOR_ID 0x1186 +#define DLINK_PRODUCT_DWM_652 0x3e04 +#define DLINK_PRODUCT_DWM_652_U5 0xce16 +#define DLINK_PRODUCT_DWM_652_U5A 0xce1e + +#define QISDA_VENDOR_ID 0x1da5 +#define QISDA_PRODUCT_H21_4512 0x4512 +#define QISDA_PRODUCT_H21_4523 0x4523 +#define QISDA_PRODUCT_H20_4515 0x4515 +#define QISDA_PRODUCT_H20_4518 0x4518 +#define QISDA_PRODUCT_H20_4519 0x4519 + +/* TLAYTECH PRODUCTS */ +#define TLAYTECH_VENDOR_ID 0x20B9 +#define TLAYTECH_PRODUCT_TEU800 0x1682 + +/* TOSHIBA PRODUCTS */ +#define TOSHIBA_VENDOR_ID 0x0930 +#define TOSHIBA_PRODUCT_HSDPA_MINICARD 0x1302 +#define TOSHIBA_PRODUCT_G450 0x0d45 + +#define ALINK_VENDOR_ID 0x1e0e +#define ALINK_PRODUCT_PH300 0x9100 +#define ALINK_PRODUCT_3GU 0x9200 + +/* ALCATEL PRODUCTS */ +#define ALCATEL_VENDOR_ID 0x1bbb +#define ALCATEL_PRODUCT_X060S_X200 0x0000 +#define ALCATEL_PRODUCT_X220_X500D 0x0017 +#define ALCATEL_PRODUCT_L100V 0x011e +#define ALCATEL_PRODUCT_L800MA 0x0203 + +#define PIRELLI_VENDOR_ID 0x1266 +#define PIRELLI_PRODUCT_C100_1 0x1002 +#define PIRELLI_PRODUCT_C100_2 0x1003 +#define PIRELLI_PRODUCT_1004 0x1004 +#define PIRELLI_PRODUCT_1005 0x1005 +#define PIRELLI_PRODUCT_1006 0x1006 +#define PIRELLI_PRODUCT_1007 0x1007 +#define PIRELLI_PRODUCT_1008 0x1008 +#define PIRELLI_PRODUCT_1009 0x1009 +#define PIRELLI_PRODUCT_100A 0x100a +#define PIRELLI_PRODUCT_100B 0x100b +#define PIRELLI_PRODUCT_100C 0x100c +#define PIRELLI_PRODUCT_100D 0x100d +#define PIRELLI_PRODUCT_100E 0x100e +#define PIRELLI_PRODUCT_100F 0x100f +#define PIRELLI_PRODUCT_1011 0x1011 +#define PIRELLI_PRODUCT_1012 0x1012 + +/* Airplus products */ +#define AIRPLUS_VENDOR_ID 0x1011 +#define AIRPLUS_PRODUCT_MCD650 0x3198 + +/* Longcheer/Longsung vendor ID; makes whitelabel devices that + * many other vendors like 4G Systems, Alcatel, ChinaBird, + * Mobidata, etc sell under their own brand names. + */ +#define LONGCHEER_VENDOR_ID 0x1c9e + +/* 4G Systems products */ +/* This is the 4G XS Stick W14 a.k.a. Mobilcom Debitel Surf-Stick * + * It seems to contain a Qualcomm QSC6240/6290 chipset */ +#define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603 + +/* iBall 3.5G connect wireless modem */ +#define IBALL_3_5G_CONNECT 0x9605 + +/* Zoom */ +#define ZOOM_PRODUCT_4597 0x9607 + +/* SpeedUp SU9800 usb 3g modem */ +#define SPEEDUP_PRODUCT_SU9800 0x9800 + +/* Haier products */ +#define HAIER_VENDOR_ID 0x201e +#define HAIER_PRODUCT_CE81B 0x10f8 +#define HAIER_PRODUCT_CE100 0x2009 + +/* Cinterion (formerly Siemens) products */ +#define SIEMENS_VENDOR_ID 0x0681 +#define CINTERION_VENDOR_ID 0x1e2d +#define CINTERION_PRODUCT_HC25_MDM 0x0047 +#define CINTERION_PRODUCT_HC25_MDMNET 0x0040 +#define CINTERION_PRODUCT_HC28_MDM 0x004C +#define CINTERION_PRODUCT_HC28_MDMNET 0x004A /* same for HC28J */ +#define CINTERION_PRODUCT_EU3_E 0x0051 +#define CINTERION_PRODUCT_EU3_P 0x0052 +#define CINTERION_PRODUCT_PH8 0x0053 +#define CINTERION_PRODUCT_AHXX 0x0055 +#define CINTERION_PRODUCT_PLXX 0x0060 + +/* Olivetti products */ +#define OLIVETTI_VENDOR_ID 0x0b3c +#define OLIVETTI_PRODUCT_OLICARD100 0xc000 +#define OLIVETTI_PRODUCT_OLICARD120 0xc001 +#define OLIVETTI_PRODUCT_OLICARD140 0xc002 +#define OLIVETTI_PRODUCT_OLICARD145 0xc003 +#define OLIVETTI_PRODUCT_OLICARD155 0xc004 +#define OLIVETTI_PRODUCT_OLICARD200 0xc005 +#define OLIVETTI_PRODUCT_OLICARD160 0xc00a +#define OLIVETTI_PRODUCT_OLICARD500 0xc00b + +/* Celot products */ +#define CELOT_VENDOR_ID 0x211f +#define CELOT_PRODUCT_CT680M 0x6801 + +/* Samsung products */ +#define SAMSUNG_VENDOR_ID 0x04e8 +#define SAMSUNG_PRODUCT_GT_B3730 0x6889 + +/* YUGA products www.yuga-info.com gavin.kx@qq.com */ +#define YUGA_VENDOR_ID 0x257A +#define YUGA_PRODUCT_CEM600 0x1601 +#define YUGA_PRODUCT_CEM610 0x1602 +#define YUGA_PRODUCT_CEM500 0x1603 +#define YUGA_PRODUCT_CEM510 0x1604 +#define YUGA_PRODUCT_CEM800 0x1605 +#define YUGA_PRODUCT_CEM900 0x1606 + +#define YUGA_PRODUCT_CEU818 0x1607 +#define YUGA_PRODUCT_CEU816 0x1608 +#define YUGA_PRODUCT_CEU828 0x1609 +#define YUGA_PRODUCT_CEU826 0x160A +#define YUGA_PRODUCT_CEU518 0x160B +#define YUGA_PRODUCT_CEU516 0x160C +#define YUGA_PRODUCT_CEU528 0x160D +#define YUGA_PRODUCT_CEU526 0x160F +#define YUGA_PRODUCT_CEU881 0x161F +#define YUGA_PRODUCT_CEU882 0x162F + +#define YUGA_PRODUCT_CWM600 0x2601 +#define YUGA_PRODUCT_CWM610 0x2602 +#define YUGA_PRODUCT_CWM500 0x2603 +#define YUGA_PRODUCT_CWM510 0x2604 +#define YUGA_PRODUCT_CWM800 0x2605 +#define YUGA_PRODUCT_CWM900 0x2606 + +#define YUGA_PRODUCT_CWU718 0x2607 +#define YUGA_PRODUCT_CWU716 0x2608 +#define YUGA_PRODUCT_CWU728 0x2609 +#define YUGA_PRODUCT_CWU726 0x260A +#define YUGA_PRODUCT_CWU518 0x260B +#define YUGA_PRODUCT_CWU516 0x260C +#define YUGA_PRODUCT_CWU528 0x260D +#define YUGA_PRODUCT_CWU581 0x260E +#define YUGA_PRODUCT_CWU526 0x260F +#define YUGA_PRODUCT_CWU582 0x261F +#define YUGA_PRODUCT_CWU583 0x262F + +#define YUGA_PRODUCT_CLM600 0x3601 +#define YUGA_PRODUCT_CLM610 0x3602 +#define YUGA_PRODUCT_CLM500 0x3603 +#define YUGA_PRODUCT_CLM510 0x3604 +#define YUGA_PRODUCT_CLM800 0x3605 +#define YUGA_PRODUCT_CLM900 0x3606 + +#define YUGA_PRODUCT_CLU718 0x3607 +#define YUGA_PRODUCT_CLU716 0x3608 +#define YUGA_PRODUCT_CLU728 0x3609 +#define YUGA_PRODUCT_CLU726 0x360A +#define YUGA_PRODUCT_CLU518 0x360B +#define YUGA_PRODUCT_CLU516 0x360C +#define YUGA_PRODUCT_CLU528 0x360D +#define YUGA_PRODUCT_CLU526 0x360F + +/* Viettel products */ +#define VIETTEL_VENDOR_ID 0x2262 +#define VIETTEL_PRODUCT_VT1000 0x0002 + +/* ZD Incorporated */ +#define ZD_VENDOR_ID 0x0685 +#define ZD_PRODUCT_7000 0x7000 + +/* LG products */ +#define LG_VENDOR_ID 0x1004 +#define LG_PRODUCT_L02C 0x618f + +/* MediaTek products */ +#define MEDIATEK_VENDOR_ID 0x0e8d +#define MEDIATEK_PRODUCT_DC_1COM 0x00a0 +#define MEDIATEK_PRODUCT_DC_4COM 0x00a5 +#define MEDIATEK_PRODUCT_DC_4COM2 0x00a7 +#define MEDIATEK_PRODUCT_DC_5COM 0x00a4 +#define MEDIATEK_PRODUCT_7208_1COM 0x7101 +#define MEDIATEK_PRODUCT_7208_2COM 0x7102 +#define MEDIATEK_PRODUCT_7103_2COM 0x7103 +#define MEDIATEK_PRODUCT_7106_2COM 0x7106 +#define MEDIATEK_PRODUCT_FP_1COM 0x0003 +#define MEDIATEK_PRODUCT_FP_2COM 0x0023 +#define MEDIATEK_PRODUCT_FPDC_1COM 0x0043 +#define MEDIATEK_PRODUCT_FPDC_2COM 0x0033 + +/* Cellient products */ +#define CELLIENT_VENDOR_ID 0x2692 +#define CELLIENT_PRODUCT_MEN200 0x9005 + +/* Hyundai Petatel Inc. products */ +#define PETATEL_VENDOR_ID 0x1ff4 +#define PETATEL_PRODUCT_NP10T_600A 0x600a +#define PETATEL_PRODUCT_NP10T_600E 0x600e + +/* TP-LINK Incorporated products */ +#define TPLINK_VENDOR_ID 0x2357 +#define TPLINK_PRODUCT_MA180 0x0201 + +/* Changhong products */ +#define CHANGHONG_VENDOR_ID 0x2077 +#define CHANGHONG_PRODUCT_CH690 0x7001 + +/* Inovia */ +#define INOVIA_VENDOR_ID 0x20a6 +#define INOVIA_SEW858 0x1105 + +/* VIA Telecom */ +#define VIATELECOM_VENDOR_ID 0x15eb +#define VIATELECOM_PRODUCT_CDS7 0x0001 + +struct option_blacklist_info { + /* bitmask of interface numbers blacklisted for send_setup */ + const unsigned long sendsetup; + /* bitmask of interface numbers that are reserved */ + const unsigned long reserved; +}; + +static const struct option_blacklist_info four_g_w14_blacklist = { + .sendsetup = BIT(0) | BIT(1), +}; + +static const struct option_blacklist_info alcatel_x200_blacklist = { + .sendsetup = BIT(0) | BIT(1), + .reserved = BIT(4), +}; + +static const struct option_blacklist_info zte_0037_blacklist = { + .sendsetup = BIT(0) | BIT(1), +}; + +static const struct option_blacklist_info zte_k3765_z_blacklist = { + .sendsetup = BIT(0) | BIT(1) | BIT(2), + .reserved = BIT(4), +}; + +static const struct option_blacklist_info zte_ad3812_z_blacklist = { + .sendsetup = BIT(0) | BIT(1) | BIT(2), +}; + +static const struct option_blacklist_info zte_mc2718_z_blacklist = { + .sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4), +}; + +static const struct option_blacklist_info zte_mc2716_z_blacklist = { + .sendsetup = BIT(1) | BIT(2) | BIT(3), +}; + +static const struct option_blacklist_info huawei_cdc12_blacklist = { + .reserved = BIT(1) | BIT(2), +}; + +static const struct option_blacklist_info net_intf0_blacklist = { + .reserved = BIT(0), +}; + +static const struct option_blacklist_info net_intf1_blacklist = { + .reserved = BIT(1), +}; + +static const struct option_blacklist_info net_intf2_blacklist = { + .reserved = BIT(2), +}; + +static const struct option_blacklist_info net_intf3_blacklist = { + .reserved = BIT(3), +}; + +static const struct option_blacklist_info net_intf4_blacklist = { + .reserved = BIT(4), +}; + +static const struct option_blacklist_info net_intf5_blacklist = { + .reserved = BIT(5), +}; + +static const struct option_blacklist_info net_intf6_blacklist = { + .reserved = BIT(6), +}; + +static const struct option_blacklist_info zte_mf626_blacklist = { + .sendsetup = BIT(0) | BIT(1), + .reserved = BIT(4), +}; + +static const struct option_blacklist_info zte_1255_blacklist = { + .reserved = BIT(3) | BIT(4), +}; + +static const struct option_blacklist_info telit_le910_blacklist = { + .sendsetup = BIT(0), + .reserved = BIT(1) | BIT(2), +}; + +static const struct option_blacklist_info telit_le920_blacklist = { + .sendsetup = BIT(0), + .reserved = BIT(1) | BIT(5), +}; + +static const struct option_blacklist_info sierra_mc73xx_blacklist = { + .sendsetup = BIT(0) | BIT(2), + .reserved = BIT(8) | BIT(10) | BIT(11), +}; + +static const struct usb_device_id option_ids[] = { + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_LIGHT) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_QUAD) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_QUAD_LIGHT) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_LIGHT) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_QUAD) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_QUAD_LIGHT) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA_BUS) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_VIPER) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_VIPER_BUS) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GT_MAX_READY) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_LIGHT) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_GT) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_EX) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_KOI_MODEM) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_SCORPION_MODEM) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_LITE) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTM380_MODEM) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q101) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q111) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) }, + { USB_DEVICE(QUANTA_VENDOR_ID, 0xea42), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c05, USB_CLASS_COMM, 0x02, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c1f, USB_CLASS_COMM, 0x02, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t) &net_intf1_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S6, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t) &net_intf1_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1750, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t) &net_intf2_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1441, USB_CLASS_COMM, 0x02, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1442, USB_CLASS_COMM, 0x02, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff), /* Huawei E1820 */ + .driver_info = (kernel_ulong_t) &net_intf1_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x72) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x73) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x74) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x75) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x7C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x72) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x73) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x74) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x75) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x02, 0x7C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x72) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x73) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x74) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x75) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x03, 0x7C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x72) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x73) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x74) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x75) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x04, 0x7C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x72) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x73) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x74) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x75) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x05, 0x7C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x02) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x03) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x04) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x06) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x0F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x10) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x12) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x13) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x14) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x15) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x17) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x18) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x19) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x1A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x1B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x1C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x31) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x32) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x33) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x34) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x35) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x36) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x3F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x48) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x49) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x4A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x4B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x4C) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x61) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x62) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x63) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x64) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x65) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x66) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6D) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6E) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x6F) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x72) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x73) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x74) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x75) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x78) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x79) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7A) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7B) }, + { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x06, 0x7C) }, + + + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V720) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U730) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U740) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U870) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_XU870) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_X950D) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EV620) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_ES720) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E725) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_ES620) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU730) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU740) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_OVMC760) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC780) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED3) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED4) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED5) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED6) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED7) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC996D) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MF3470) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC547) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED) }, + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) }, + /* Novatel Ovation MC551 a.k.a. Verizon USB551L */ + { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC551, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E362, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E371, 0xff, 0xff, 0xff) }, + + { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) }, + { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) }, + { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H02) }, + { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_SKYPEPHONE_S2) }, + + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5500_MINICARD) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5505_MINICARD) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_EXPRESSCARD) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO ExpressCard == Novatel Merlin XV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5510_EXPRESSCARD) }, /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard == Novatel Merlin XU870 HSDPA/3G */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD_SPRINT) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite E720 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD_TELUS) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite ET620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5720_MINICARD_VZW) }, /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5720_MINICARD_SPRINT) }, /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5720_MINICARD_TELUS) }, /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_CINGULAR) }, /* Dell Wireless HSDPA 5520 == Novatel Expedite EU860D */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_GENERIC_L) }, /* Dell Wireless HSDPA 5520 */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_GENERIC_I) }, /* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ + { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5804_MINICARD_ATT, 0xff, 0xff, 0xff) }, + { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */ + { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, + { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) }, + { USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) }, + { USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1004, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1005, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1006, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1007, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1008, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1009, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100A, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100B, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100C, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100D, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100E, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_100F, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1010, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1011, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) }, + { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) }, + { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */ + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */ + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */ + { USB_DEVICE_INTERFACE_CLASS(SIERRA_VENDOR_ID, 0x68c0, 0xff), + .driver_info = (kernel_ulong_t)&sierra_mc73xx_blacklist }, /* MC73xx */ + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003), + .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6004) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6005) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_628A) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHE_628S), + .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_301), + .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628), + .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628S) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_680) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_685A) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720S), + .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7002), + .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629K), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7004), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7005) }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_629), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629S), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720I), + .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7212), + .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7213), + .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7251), + .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7252), + .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7253), + .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910), + .driver_info = (kernel_ulong_t)&telit_le910_blacklist }, + { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920), + .driver_info = (kernel_ulong_t)&telit_le920_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */ + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0004, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0005, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0006, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0008, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0009, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000a, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000b, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000c, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000d, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000e, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000f, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0010, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0011, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0022, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0023, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff, + 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_mf626_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0032, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0033, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0034, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0037, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_0037_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0038, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0039, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0040, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0042, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0043, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0044, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0048, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0049, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0050, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0056, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0064, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0065, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0067, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0077, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0079, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0082, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0083, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0086, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0087, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0088, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0089, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0090, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0091, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0092, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0093, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0095, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0096, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0097, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0106, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0108, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0113, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0117, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0118, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0121, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0122, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0123, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0124, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0125, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf6_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0128, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0135, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0136, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0137, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0139, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0142, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0144, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0145, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0148, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0151, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0153, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0189, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */ + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0196, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0197, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0199, 0xff, 0xff, 0xff), /* ZTE MF820S */ + .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0200, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0201, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0254, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */ + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff), /* ONDA MT8205 */ + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff), /* ZTE MF880 */ + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0330, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0395, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0412, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G */ + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1021, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1060, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1061, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1062, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1063, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1064, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1065, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1066, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1067, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1068, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1069, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1070, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1071, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1072, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1073, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1074, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1075, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1076, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1077, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1078, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1079, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1080, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1081, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1082, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1083, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1084, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1085, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1086, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1087, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1088, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1089, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1090, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1091, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1092, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1093, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1094, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1095, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1096, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1097, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1098, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1099, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1100, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1101, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1102, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1103, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1104, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1105, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1106, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1107, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1108, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1109, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1110, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1111, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1112, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1113, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1114, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1115, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1116, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1117, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1118, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1119, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1120, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1121, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1122, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1123, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1124, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1125, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1126, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1127, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1128, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1129, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1130, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1131, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1132, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1133, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1134, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1135, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1136, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1137, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1138, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1139, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1140, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1141, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1142, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1143, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1144, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1145, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1146, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1147, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1148, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1149, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1150, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1151, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1152, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1153, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1154, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1155, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1156, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1157, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1158, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1159, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1160, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1161, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1162, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1163, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1164, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1165, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1166, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1167, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1168, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1169, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1170, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1244, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1245, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1246, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1247, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1248, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1249, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1250, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1251, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1252, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1253, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1254, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1255, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_1255_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1256, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1257, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1258, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1259, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1260, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1261, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1262, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1263, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1264, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1265, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1266, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1267, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1268, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1269, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1270, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1271, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1272, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1273, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1274, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1275, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1276, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1277, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1278, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1279, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1280, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1281, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1282, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1283, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1284, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1285, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1286, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1287, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1288, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1289, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1290, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1291, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1292, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1293, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1294, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1295, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1296, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1297, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1301, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1302, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1303, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1333, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1424, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1425, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff), /* ZTE MF91 */ + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G v2 */ + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1545, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1546, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1547, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1565, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1566, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1567, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1589, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1590, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1591, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1592, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1594, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1596, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1598, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1600, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, + 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) }, + + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */ + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffe9, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8b, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8c, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8d, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8e, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff8f, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff90, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff91, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff92, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffec, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffee, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff6, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff7, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff8, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff9, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfffb, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfffc, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MG880, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist }, + { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) }, + + { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, + { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, + { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */ + { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5A) }, + { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) }, + { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) }, + { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) }, + { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4518) }, + { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) }, + { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) }, + { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */ + { USB_DEVICE(ALINK_VENDOR_ID, 0x9000) }, + { USB_DEVICE(ALINK_VENDOR_ID, ALINK_PRODUCT_PH300) }, + { USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) }, + { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200), + .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist + }, + { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D), + .driver_info = (kernel_ulong_t)&net_intf6_blacklist }, + { USB_DEVICE(ALCATEL_VENDOR_ID, 0x0052), + .driver_info = (kernel_ulong_t)&net_intf6_blacklist }, + { USB_DEVICE(ALCATEL_VENDOR_ID, 0x00b6), + .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + { USB_DEVICE(ALCATEL_VENDOR_ID, 0x00b7), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L800MA), + .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, + { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, + { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14), + .driver_info = (kernel_ulong_t)&four_g_w14_blacklist + }, + { USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, SPEEDUP_PRODUCT_SU9800, 0xff) }, + { USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) }, + { USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) }, + { USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) }, + { USB_DEVICE_AND_INTERFACE_INFO(HAIER_VENDOR_ID, HAIER_PRODUCT_CE81B, 0xff, 0xff, 0xff) }, + /* Pirelli */ + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_2, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1004, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1005, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1006, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1007, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1008, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1009, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100A, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100B, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100C, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100D, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100E, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_100F, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1011, 0xff) }, + { USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_1012, 0xff) }, + /* Cinterion */ + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) }, + { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) }, + { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDMNET) }, + { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, /* HC28 enumerates with Siemens or Cinterion VID depending on FW revision */ + { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) }, + { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD140), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) }, + { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD155), + .driver_info = (kernel_ulong_t)&net_intf6_blacklist }, + { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200), + .driver_info = (kernel_ulong_t)&net_intf6_blacklist }, + { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD160), + .driver_info = (kernel_ulong_t)&net_intf6_blacklist }, + { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD500), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */ + { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/ + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM610) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM500) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM510) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM800) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM900) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU818) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU816) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU828) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU826) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU518) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU516) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU528) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU526) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM600) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM610) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM500) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM510) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM800) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWM900) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU718) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU716) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU728) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU726) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU518) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU516) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU528) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU526) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM600) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM610) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM500) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM510) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM800) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLM900) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU718) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU716) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU728) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU726) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU518) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU516) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU528) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU881) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEU882) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU581) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU582) }, + { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CWU583) }, + { USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) }, + { USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */ + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) }, /* MediaTek MT6276M modem & app port */ + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_1COM, 0x0a, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_5COM, 0xff, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_5COM, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM, 0xff, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7208_1COM, 0x02, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7208_2COM, 0x02, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_1COM, 0x0a, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_2COM, 0x0a, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_1COM, 0x0a, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_2COM, 0x0a, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7103_2COM, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7106_2COM, 0x02, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) }, + { USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) }, + { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600A) }, + { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600E) }, + { USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE(TPLINK_VENDOR_ID, 0x9000), /* TP-Link MA260 */ + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x02, 0x01) }, /* D-Link DWM-156 (variant) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x00, 0x00) }, /* D-Link DWM-156 (variant) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x02, 0x01) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */ + { USB_DEVICE(INOVIA_VENDOR_ID, INOVIA_SEW858) }, + { USB_DEVICE(VIATELECOM_VENDOR_ID, VIATELECOM_PRODUCT_CDS7) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, option_ids); + +/* The card has three separate interfaces, which the serial driver + * recognizes separately, thus num_port=1. + */ + +static struct usb_serial_driver option_1port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "option1", + }, + .description = "GSM modem (1-port)", + .id_table = option_ids, + .num_ports = 1, + .probe = option_probe, + .open = usb_wwan_open, + .close = usb_wwan_close, + .dtr_rts = usb_wwan_dtr_rts, + .write = usb_wwan_write, + .write_room = usb_wwan_write_room, + .chars_in_buffer = usb_wwan_chars_in_buffer, + .tiocmget = usb_wwan_tiocmget, + .tiocmset = usb_wwan_tiocmset, + .ioctl = usb_wwan_ioctl, + .attach = option_attach, + .release = option_release, + .port_probe = usb_wwan_port_probe, + .port_remove = usb_wwan_port_remove, + .read_int_callback = option_instat_callback, +#ifdef CONFIG_PM + .suspend = usb_wwan_suspend, + .resume = usb_wwan_resume, +#endif +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &option_1port_device, NULL +}; + +struct option_private { + u8 bInterfaceNumber; +}; + +module_usb_serial_driver(serial_drivers, option_ids); + +static int option_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + struct usb_interface_descriptor *iface_desc = + &serial->interface->cur_altsetting->desc; + struct usb_device_descriptor *dev_desc = &serial->dev->descriptor; + const struct option_blacklist_info *blacklist; + + /* Never bind to the CD-Rom emulation interface */ + if (iface_desc->bInterfaceClass == 0x08) + return -ENODEV; + + /* + * Don't bind reserved interfaces (like network ones) which often have + * the same class/subclass/protocol as the serial interfaces. Look at + * the Windows driver .INF files for reserved interface numbers. + */ + blacklist = (void *)id->driver_info; + if (blacklist && test_bit(iface_desc->bInterfaceNumber, + &blacklist->reserved)) + return -ENODEV; + /* + * Don't bind network interface on Samsung GT-B3730, it is handled by + * a separate module. + */ + if (dev_desc->idVendor == cpu_to_le16(SAMSUNG_VENDOR_ID) && + dev_desc->idProduct == cpu_to_le16(SAMSUNG_PRODUCT_GT_B3730) && + iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA) + return -ENODEV; + + /* Store the blacklist info so we can use it during attach. */ + usb_set_serial_data(serial, (void *)blacklist); + + return 0; +} + +static int option_attach(struct usb_serial *serial) +{ + struct usb_interface_descriptor *iface_desc; + const struct option_blacklist_info *blacklist; + struct usb_wwan_intf_private *data; + struct option_private *priv; + + data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL); + if (!data) + return -ENOMEM; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + kfree(data); + return -ENOMEM; + } + + /* Retrieve blacklist info stored at probe. */ + blacklist = usb_get_serial_data(serial); + + iface_desc = &serial->interface->cur_altsetting->desc; + + priv->bInterfaceNumber = iface_desc->bInterfaceNumber; + data->private = priv; + + if (!blacklist || !test_bit(iface_desc->bInterfaceNumber, + &blacklist->sendsetup)) { + data->send_setup = option_send_setup; + } + spin_lock_init(&data->susp_lock); + + usb_set_serial_data(serial, data); + + return 0; +} + +static void option_release(struct usb_serial *serial) +{ + struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial); + struct option_private *priv = intfdata->private; + + kfree(priv); + kfree(intfdata); +} + +static void option_instat_callback(struct urb *urb) +{ + int err; + int status = urb->status; + struct usb_serial_port *port = urb->context; + struct device *dev = &port->dev; + struct usb_wwan_port_private *portdata = + usb_get_serial_port_data(port); + + dev_dbg(dev, "%s: urb %p port %p has data %p\n", __func__, urb, port, portdata); + + if (status == 0) { + struct usb_ctrlrequest *req_pkt = + (struct usb_ctrlrequest *)urb->transfer_buffer; + + if (!req_pkt) { + dev_dbg(dev, "%s: NULL req_pkt\n", __func__); + return; + } + if ((req_pkt->bRequestType == 0xA1) && + (req_pkt->bRequest == 0x20)) { + int old_dcd_state; + unsigned char signals = *((unsigned char *) + urb->transfer_buffer + + sizeof(struct usb_ctrlrequest)); + + dev_dbg(dev, "%s: signal x%x\n", __func__, signals); + + old_dcd_state = portdata->dcd_state; + portdata->cts_state = 1; + portdata->dcd_state = ((signals & 0x01) ? 1 : 0); + portdata->dsr_state = ((signals & 0x02) ? 1 : 0); + portdata->ri_state = ((signals & 0x08) ? 1 : 0); + + if (old_dcd_state && !portdata->dcd_state) + tty_port_tty_hangup(&port->port, true); + } else { + dev_dbg(dev, "%s: type %x req %x\n", __func__, + req_pkt->bRequestType, req_pkt->bRequest); + } + } else if (status == -ENOENT || status == -ESHUTDOWN) { + dev_dbg(dev, "%s: urb stopped: %d\n", __func__, status); + } else + dev_err(dev, "%s: error %d\n", __func__, status); + + /* Resubmit urb so we continue receiving IRQ data */ + if (status != -ESHUTDOWN && status != -ENOENT) { + usb_mark_last_busy(port->serial->dev); + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) + dev_dbg(dev, "%s: resubmit intr urb failed. (%d)\n", + __func__, err); + } +} + +/** send RTS/DTR state to the port. + * + * This is exactly the same as SET_CONTROL_LINE_STATE from the PSTN + * CDC. +*/ +static int option_send_setup(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial); + struct option_private *priv = intfdata->private; + struct usb_wwan_port_private *portdata; + int val = 0; + int res; + + portdata = usb_get_serial_port_data(port); + + if (portdata->dtr_state) + val |= 0x01; + if (portdata->rts_state) + val |= 0x02; + + res = usb_autopm_get_interface(serial->interface); + if (res) + return res; + + res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + 0x22, 0x21, val, priv->bInterfaceNumber, NULL, + 0, USB_CTRL_SET_TIMEOUT); + + usb_autopm_put_interface(serial->interface); + + return res; +} + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/oti6858.c b/kernel/drivers/usb/serial/oti6858.c new file mode 100644 index 000000000..a4b88bc03 --- /dev/null +++ b/kernel/drivers/usb/serial/oti6858.c @@ -0,0 +1,847 @@ +/* + * Ours Technology Inc. OTi-6858 USB to serial adapter driver. + * + * Copyleft (C) 2007 Kees Lemmens (adapted for kernel 2.6.20) + * Copyright (C) 2006 Tomasz Michal Lukaszewski (FIXME: add e-mail) + * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2003 IBM Corp. + * + * Many thanks to the authors of pl2303 driver: all functions in this file + * are heavily based on pl2303 code, buffering code is a 1-to-1 copy. + * + * Warning! You use this driver on your own risk! The only official + * description of this device I have is datasheet from manufacturer, + * and it doesn't contain almost any information needed to write a driver. + * Almost all knowlegde used while writing this driver was gathered by: + * - analyzing traffic between device and the M$ Windows 2000 driver, + * - trying different bit combinations and checking pin states + * with a voltmeter, + * - receiving malformed frames and producing buffer overflows + * to learn how errors are reported, + * So, THIS CODE CAN DESTROY OTi-6858 AND ANY OTHER DEVICES, THAT ARE + * CONNECTED TO IT! + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * See Documentation/usb/usb-serial.txt for more information on using this + * driver + * + * TODO: + * - implement correct flushing for ioctls and oti6858_close() + * - check how errors (rx overflow, parity error, framing error) are reported + * - implement oti6858_break_ctl() + * - implement more ioctls + * - test/implement flow control + * - allow setting custom baud rates + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/serial.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/uaccess.h> +#include <linux/kfifo.h> +#include "oti6858.h" + +#define OTI6858_DESCRIPTION \ + "Ours Technology Inc. OTi-6858 USB to serial adapter driver" +#define OTI6858_AUTHOR "Tomasz Michal Lukaszewski <FIXME@FIXME>" + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(OTI6858_VENDOR_ID, OTI6858_PRODUCT_ID) }, + { } +}; + +MODULE_DEVICE_TABLE(usb, id_table); + +/* requests */ +#define OTI6858_REQ_GET_STATUS (USB_DIR_IN | USB_TYPE_VENDOR | 0x00) +#define OTI6858_REQ_T_GET_STATUS 0x01 + +#define OTI6858_REQ_SET_LINE (USB_DIR_OUT | USB_TYPE_VENDOR | 0x00) +#define OTI6858_REQ_T_SET_LINE 0x00 + +#define OTI6858_REQ_CHECK_TXBUFF (USB_DIR_IN | USB_TYPE_VENDOR | 0x01) +#define OTI6858_REQ_T_CHECK_TXBUFF 0x00 + +/* format of the control packet */ +struct oti6858_control_pkt { + __le16 divisor; /* baud rate = 96000000 / (16 * divisor), LE */ +#define OTI6858_MAX_BAUD_RATE 3000000 + u8 frame_fmt; +#define FMT_STOP_BITS_MASK 0xc0 +#define FMT_STOP_BITS_1 0x00 +#define FMT_STOP_BITS_2 0x40 /* 1.5 stop bits if FMT_DATA_BITS_5 */ +#define FMT_PARITY_MASK 0x38 +#define FMT_PARITY_NONE 0x00 +#define FMT_PARITY_ODD 0x08 +#define FMT_PARITY_EVEN 0x18 +#define FMT_PARITY_MARK 0x28 +#define FMT_PARITY_SPACE 0x38 +#define FMT_DATA_BITS_MASK 0x03 +#define FMT_DATA_BITS_5 0x00 +#define FMT_DATA_BITS_6 0x01 +#define FMT_DATA_BITS_7 0x02 +#define FMT_DATA_BITS_8 0x03 + u8 something; /* always equals 0x43 */ + u8 control; /* settings of flow control lines */ +#define CONTROL_MASK 0x0c +#define CONTROL_DTR_HIGH 0x08 +#define CONTROL_RTS_HIGH 0x04 + u8 tx_status; +#define TX_BUFFER_EMPTIED 0x09 + u8 pin_state; +#define PIN_MASK 0x3f +#define PIN_MSR_MASK 0x1b +#define PIN_RTS 0x20 /* output pin */ +#define PIN_CTS 0x10 /* input pin, active low */ +#define PIN_DSR 0x08 /* input pin, active low */ +#define PIN_DTR 0x04 /* output pin */ +#define PIN_RI 0x02 /* input pin, active low */ +#define PIN_DCD 0x01 /* input pin, active low */ + u8 rx_bytes_avail; /* number of bytes in rx buffer */; +}; + +#define OTI6858_CTRL_PKT_SIZE sizeof(struct oti6858_control_pkt) +#define OTI6858_CTRL_EQUALS_PENDING(a, priv) \ + (((a)->divisor == (priv)->pending_setup.divisor) \ + && ((a)->control == (priv)->pending_setup.control) \ + && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt)) + +/* function prototypes */ +static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port); +static void oti6858_close(struct usb_serial_port *port); +static void oti6858_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); +static void oti6858_init_termios(struct tty_struct *tty); +static void oti6858_read_int_callback(struct urb *urb); +static void oti6858_read_bulk_callback(struct urb *urb); +static void oti6858_write_bulk_callback(struct urb *urb); +static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); +static int oti6858_write_room(struct tty_struct *tty); +static int oti6858_chars_in_buffer(struct tty_struct *tty); +static int oti6858_tiocmget(struct tty_struct *tty); +static int oti6858_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +static int oti6858_port_probe(struct usb_serial_port *port); +static int oti6858_port_remove(struct usb_serial_port *port); + +/* device info */ +static struct usb_serial_driver oti6858_device = { + .driver = { + .owner = THIS_MODULE, + .name = "oti6858", + }, + .id_table = id_table, + .num_ports = 1, + .open = oti6858_open, + .close = oti6858_close, + .write = oti6858_write, + .set_termios = oti6858_set_termios, + .init_termios = oti6858_init_termios, + .tiocmget = oti6858_tiocmget, + .tiocmset = oti6858_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .read_bulk_callback = oti6858_read_bulk_callback, + .read_int_callback = oti6858_read_int_callback, + .write_bulk_callback = oti6858_write_bulk_callback, + .write_room = oti6858_write_room, + .chars_in_buffer = oti6858_chars_in_buffer, + .port_probe = oti6858_port_probe, + .port_remove = oti6858_port_remove, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &oti6858_device, NULL +}; + +struct oti6858_private { + spinlock_t lock; + + struct oti6858_control_pkt status; + + struct { + u8 read_urb_in_use; + u8 write_urb_in_use; + } flags; + struct delayed_work delayed_write_work; + + struct { + __le16 divisor; + u8 frame_fmt; + u8 control; + } pending_setup; + u8 transient; + u8 setup_done; + struct delayed_work delayed_setup_work; + + struct usb_serial_port *port; /* USB port with which associated */ +}; + +static void setup_line(struct work_struct *work) +{ + struct oti6858_private *priv = container_of(work, + struct oti6858_private, delayed_setup_work.work); + struct usb_serial_port *port = priv->port; + struct oti6858_control_pkt *new_setup; + unsigned long flags; + int result; + + new_setup = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL); + if (!new_setup) { + /* we will try again */ + schedule_delayed_work(&priv->delayed_setup_work, + msecs_to_jiffies(2)); + return; + } + + result = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + OTI6858_REQ_T_GET_STATUS, + OTI6858_REQ_GET_STATUS, + 0, 0, + new_setup, OTI6858_CTRL_PKT_SIZE, + 100); + + if (result != OTI6858_CTRL_PKT_SIZE) { + dev_err(&port->dev, "%s(): error reading status\n", __func__); + kfree(new_setup); + /* we will try again */ + schedule_delayed_work(&priv->delayed_setup_work, + msecs_to_jiffies(2)); + return; + } + + spin_lock_irqsave(&priv->lock, flags); + if (!OTI6858_CTRL_EQUALS_PENDING(new_setup, priv)) { + new_setup->divisor = priv->pending_setup.divisor; + new_setup->control = priv->pending_setup.control; + new_setup->frame_fmt = priv->pending_setup.frame_fmt; + + spin_unlock_irqrestore(&priv->lock, flags); + result = usb_control_msg(port->serial->dev, + usb_sndctrlpipe(port->serial->dev, 0), + OTI6858_REQ_T_SET_LINE, + OTI6858_REQ_SET_LINE, + 0, 0, + new_setup, OTI6858_CTRL_PKT_SIZE, + 100); + } else { + spin_unlock_irqrestore(&priv->lock, flags); + result = 0; + } + kfree(new_setup); + + spin_lock_irqsave(&priv->lock, flags); + if (result != OTI6858_CTRL_PKT_SIZE) + priv->transient = 0; + priv->setup_done = 1; + spin_unlock_irqrestore(&priv->lock, flags); + + dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__); + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result != 0) { + dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n", + __func__, result); + } +} + +static void send_data(struct work_struct *work) +{ + struct oti6858_private *priv = container_of(work, + struct oti6858_private, delayed_write_work.work); + struct usb_serial_port *port = priv->port; + int count = 0, result; + unsigned long flags; + u8 *allow; + + spin_lock_irqsave(&priv->lock, flags); + if (priv->flags.write_urb_in_use) { + spin_unlock_irqrestore(&priv->lock, flags); + schedule_delayed_work(&priv->delayed_write_work, + msecs_to_jiffies(2)); + return; + } + priv->flags.write_urb_in_use = 1; + spin_unlock_irqrestore(&priv->lock, flags); + + spin_lock_irqsave(&port->lock, flags); + count = kfifo_len(&port->write_fifo); + spin_unlock_irqrestore(&port->lock, flags); + + if (count > port->bulk_out_size) + count = port->bulk_out_size; + + if (count != 0) { + allow = kmalloc(1, GFP_KERNEL); + if (!allow) + return; + + result = usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + OTI6858_REQ_T_CHECK_TXBUFF, + OTI6858_REQ_CHECK_TXBUFF, + count, 0, allow, 1, 100); + if (result != 1 || *allow != 0) + count = 0; + kfree(allow); + } + + if (count == 0) { + priv->flags.write_urb_in_use = 0; + + dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__); + result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); + if (result != 0) { + dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n", + __func__, result); + } + return; + } + + count = kfifo_out_locked(&port->write_fifo, + port->write_urb->transfer_buffer, + count, &port->lock); + port->write_urb->transfer_buffer_length = count; + result = usb_submit_urb(port->write_urb, GFP_NOIO); + if (result != 0) { + dev_err_console(port, "%s(): usb_submit_urb() failed with error %d\n", + __func__, result); + priv->flags.write_urb_in_use = 0; + } + + usb_serial_port_softint(port); +} + +static int oti6858_port_probe(struct usb_serial_port *port) +{ + struct oti6858_private *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + priv->port = port; + INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line); + INIT_DELAYED_WORK(&priv->delayed_write_work, send_data); + + usb_set_serial_port_data(port, priv); + + port->port.drain_delay = 256; /* FIXME: check the FIFO length */ + + return 0; +} + +static int oti6858_port_remove(struct usb_serial_port *port) +{ + struct oti6858_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} + +static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + if (!count) + return count; + + count = kfifo_in_locked(&port->write_fifo, buf, count, &port->lock); + + return count; +} + +static int oti6858_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + int room = 0; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + room = kfifo_avail(&port->write_fifo); + spin_unlock_irqrestore(&port->lock, flags); + + return room; +} + +static int oti6858_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + int chars = 0; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + chars = kfifo_len(&port->write_fifo); + spin_unlock_irqrestore(&port->lock, flags); + + return chars; +} + +static void oti6858_init_termios(struct tty_struct *tty) +{ + tty->termios = tty_std_termios; + tty->termios.c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL; + tty->termios.c_ispeed = 38400; + tty->termios.c_ospeed = 38400; +} + +static void oti6858_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + struct oti6858_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + unsigned int cflag; + u8 frame_fmt, control; + __le16 divisor; + int br; + + cflag = tty->termios.c_cflag; + + spin_lock_irqsave(&priv->lock, flags); + divisor = priv->pending_setup.divisor; + frame_fmt = priv->pending_setup.frame_fmt; + control = priv->pending_setup.control; + spin_unlock_irqrestore(&priv->lock, flags); + + frame_fmt &= ~FMT_DATA_BITS_MASK; + switch (cflag & CSIZE) { + case CS5: + frame_fmt |= FMT_DATA_BITS_5; + break; + case CS6: + frame_fmt |= FMT_DATA_BITS_6; + break; + case CS7: + frame_fmt |= FMT_DATA_BITS_7; + break; + default: + case CS8: + frame_fmt |= FMT_DATA_BITS_8; + break; + } + + /* manufacturer claims that this device can work with baud rates + * up to 3 Mbps; I've tested it only on 115200 bps, so I can't + * guarantee that any other baud rate will work (especially + * the higher ones) + */ + br = tty_get_baud_rate(tty); + if (br == 0) { + divisor = 0; + } else { + int real_br; + int new_divisor; + br = min(br, OTI6858_MAX_BAUD_RATE); + + new_divisor = (96000000 + 8 * br) / (16 * br); + real_br = 96000000 / (16 * new_divisor); + divisor = cpu_to_le16(new_divisor); + tty_encode_baud_rate(tty, real_br, real_br); + } + + frame_fmt &= ~FMT_STOP_BITS_MASK; + if ((cflag & CSTOPB) != 0) + frame_fmt |= FMT_STOP_BITS_2; + else + frame_fmt |= FMT_STOP_BITS_1; + + frame_fmt &= ~FMT_PARITY_MASK; + if ((cflag & PARENB) != 0) { + if ((cflag & PARODD) != 0) + frame_fmt |= FMT_PARITY_ODD; + else + frame_fmt |= FMT_PARITY_EVEN; + } else { + frame_fmt |= FMT_PARITY_NONE; + } + + control &= ~CONTROL_MASK; + if ((cflag & CRTSCTS) != 0) + control |= (CONTROL_DTR_HIGH | CONTROL_RTS_HIGH); + + /* change control lines if we are switching to or from B0 */ + /* FIXME: + spin_lock_irqsave(&priv->lock, flags); + control = priv->line_control; + if ((cflag & CBAUD) == B0) + priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); + else + priv->line_control |= (CONTROL_DTR | CONTROL_RTS); + if (control != priv->line_control) { + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + set_control_lines(serial->dev, control); + } else { + spin_unlock_irqrestore(&priv->lock, flags); + } + */ + + spin_lock_irqsave(&priv->lock, flags); + if (divisor != priv->pending_setup.divisor + || control != priv->pending_setup.control + || frame_fmt != priv->pending_setup.frame_fmt) { + priv->pending_setup.divisor = divisor; + priv->pending_setup.control = control; + priv->pending_setup.frame_fmt = frame_fmt; + } + spin_unlock_irqrestore(&priv->lock, flags); +} + +static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct oti6858_private *priv = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + struct oti6858_control_pkt *buf; + unsigned long flags; + int result; + + usb_clear_halt(serial->dev, port->write_urb->pipe); + usb_clear_halt(serial->dev, port->read_urb->pipe); + + buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + OTI6858_REQ_T_GET_STATUS, + OTI6858_REQ_GET_STATUS, + 0, 0, + buf, OTI6858_CTRL_PKT_SIZE, + 100); + if (result != OTI6858_CTRL_PKT_SIZE) { + /* assume default (after power-on reset) values */ + buf->divisor = cpu_to_le16(0x009c); /* 38400 bps */ + buf->frame_fmt = 0x03; /* 8N1 */ + buf->something = 0x43; + buf->control = 0x4c; /* DTR, RTS */ + buf->tx_status = 0x00; + buf->pin_state = 0x5b; /* RTS, CTS, DSR, DTR, RI, DCD */ + buf->rx_bytes_avail = 0x00; + } + + spin_lock_irqsave(&priv->lock, flags); + memcpy(&priv->status, buf, OTI6858_CTRL_PKT_SIZE); + priv->pending_setup.divisor = buf->divisor; + priv->pending_setup.frame_fmt = buf->frame_fmt; + priv->pending_setup.control = buf->control; + spin_unlock_irqrestore(&priv->lock, flags); + kfree(buf); + + dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__); + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result != 0) { + dev_err(&port->dev, "%s(): usb_submit_urb() failed with error %d\n", + __func__, result); + oti6858_close(port); + return result; + } + + /* setup termios */ + if (tty) + oti6858_set_termios(tty, port, NULL); + + return 0; +} + +static void oti6858_close(struct usb_serial_port *port) +{ + struct oti6858_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + /* clear out any remaining data in the buffer */ + kfifo_reset_out(&port->write_fifo); + spin_unlock_irqrestore(&port->lock, flags); + + dev_dbg(&port->dev, "%s(): after buf_clear()\n", __func__); + + /* cancel scheduled setup */ + cancel_delayed_work_sync(&priv->delayed_setup_work); + cancel_delayed_work_sync(&priv->delayed_write_work); + + /* shutdown our urbs */ + dev_dbg(&port->dev, "%s(): shutting down urbs\n", __func__); + usb_kill_urb(port->write_urb); + usb_kill_urb(port->read_urb); + usb_kill_urb(port->interrupt_in_urb); +} + +static int oti6858_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct oti6858_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 control; + + dev_dbg(&port->dev, "%s(set = 0x%08x, clear = 0x%08x)\n", + __func__, set, clear); + + /* FIXME: check if this is correct (active high/low) */ + spin_lock_irqsave(&priv->lock, flags); + control = priv->pending_setup.control; + if ((set & TIOCM_RTS) != 0) + control |= CONTROL_RTS_HIGH; + if ((set & TIOCM_DTR) != 0) + control |= CONTROL_DTR_HIGH; + if ((clear & TIOCM_RTS) != 0) + control &= ~CONTROL_RTS_HIGH; + if ((clear & TIOCM_DTR) != 0) + control &= ~CONTROL_DTR_HIGH; + + if (control != priv->pending_setup.control) + priv->pending_setup.control = control; + + spin_unlock_irqrestore(&priv->lock, flags); + return 0; +} + +static int oti6858_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct oti6858_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + unsigned pin_state; + unsigned result = 0; + + spin_lock_irqsave(&priv->lock, flags); + pin_state = priv->status.pin_state & PIN_MASK; + spin_unlock_irqrestore(&priv->lock, flags); + + /* FIXME: check if this is correct (active high/low) */ + if ((pin_state & PIN_RTS) != 0) + result |= TIOCM_RTS; + if ((pin_state & PIN_CTS) != 0) + result |= TIOCM_CTS; + if ((pin_state & PIN_DSR) != 0) + result |= TIOCM_DSR; + if ((pin_state & PIN_DTR) != 0) + result |= TIOCM_DTR; + if ((pin_state & PIN_RI) != 0) + result |= TIOCM_RI; + if ((pin_state & PIN_DCD) != 0) + result |= TIOCM_CD; + + dev_dbg(&port->dev, "%s() = 0x%08x\n", __func__, result); + + return result; +} + +static void oti6858_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct oti6858_private *priv = usb_get_serial_port_data(port); + int transient = 0, can_recv = 0, resubmit = 1; + int status = urb->status; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&urb->dev->dev, "%s(): urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_dbg(&urb->dev->dev, "%s(): nonzero urb status received: %d\n", + __func__, status); + break; + } + + if (status == 0 && urb->actual_length == OTI6858_CTRL_PKT_SIZE) { + struct oti6858_control_pkt *xs = urb->transfer_buffer; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + + if (!priv->transient) { + if (!OTI6858_CTRL_EQUALS_PENDING(xs, priv)) { + if (xs->rx_bytes_avail == 0) { + priv->transient = 4; + priv->setup_done = 0; + resubmit = 0; + dev_dbg(&port->dev, "%s(): scheduling setup_line()\n", __func__); + schedule_delayed_work(&priv->delayed_setup_work, 0); + } + } + } else { + if (OTI6858_CTRL_EQUALS_PENDING(xs, priv)) { + priv->transient = 0; + } else if (!priv->setup_done) { + resubmit = 0; + } else if (--priv->transient == 0) { + if (xs->rx_bytes_avail == 0) { + priv->transient = 4; + priv->setup_done = 0; + resubmit = 0; + dev_dbg(&port->dev, "%s(): scheduling setup_line()\n", __func__); + schedule_delayed_work(&priv->delayed_setup_work, 0); + } + } + } + + if (!priv->transient) { + u8 delta = xs->pin_state ^ priv->status.pin_state; + + if (delta & PIN_MSR_MASK) { + if (delta & PIN_CTS) + port->icount.cts++; + if (delta & PIN_DSR) + port->icount.dsr++; + if (delta & PIN_RI) + port->icount.rng++; + if (delta & PIN_DCD) + port->icount.dcd++; + + wake_up_interruptible(&port->port.delta_msr_wait); + } + + memcpy(&priv->status, xs, OTI6858_CTRL_PKT_SIZE); + } + + if (!priv->transient && xs->rx_bytes_avail != 0) { + can_recv = xs->rx_bytes_avail; + priv->flags.read_urb_in_use = 1; + } + + transient = priv->transient; + spin_unlock_irqrestore(&priv->lock, flags); + } + + if (can_recv) { + int result; + + result = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (result != 0) { + priv->flags.read_urb_in_use = 0; + dev_err(&port->dev, "%s(): usb_submit_urb() failed," + " error %d\n", __func__, result); + } else { + resubmit = 0; + } + } else if (!transient) { + unsigned long flags; + int count; + + spin_lock_irqsave(&port->lock, flags); + count = kfifo_len(&port->write_fifo); + spin_unlock_irqrestore(&port->lock, flags); + + spin_lock_irqsave(&priv->lock, flags); + if (priv->flags.write_urb_in_use == 0 && count != 0) { + schedule_delayed_work(&priv->delayed_write_work, 0); + resubmit = 0; + } + spin_unlock_irqrestore(&priv->lock, flags); + } + + if (resubmit) { + int result; + +/* dev_dbg(&urb->dev->dev, "%s(): submitting interrupt urb\n", __func__); */ + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result != 0) { + dev_err(&urb->dev->dev, + "%s(): usb_submit_urb() failed with" + " error %d\n", __func__, result); + } + } +} + +static void oti6858_read_bulk_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct oti6858_private *priv = usb_get_serial_port_data(port); + unsigned char *data = urb->transfer_buffer; + unsigned long flags; + int status = urb->status; + int result; + + spin_lock_irqsave(&priv->lock, flags); + priv->flags.read_urb_in_use = 0; + spin_unlock_irqrestore(&priv->lock, flags); + + if (status != 0) { + dev_dbg(&urb->dev->dev, "%s(): unable to handle the error, exiting\n", __func__); + return; + } + + if (urb->actual_length > 0) { + tty_insert_flip_string(&port->port, data, urb->actual_length); + tty_flip_buffer_push(&port->port); + } + + /* schedule the interrupt urb */ + result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); + if (result != 0 && result != -EPERM) { + dev_err(&port->dev, "%s(): usb_submit_urb() failed," + " error %d\n", __func__, result); + } +} + +static void oti6858_write_bulk_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct oti6858_private *priv = usb_get_serial_port_data(port); + int status = urb->status; + int result; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&urb->dev->dev, "%s(): urb shutting down with status: %d\n", __func__, status); + priv->flags.write_urb_in_use = 0; + return; + default: + /* error in the urb, so we have to resubmit it */ + dev_dbg(&urb->dev->dev, "%s(): nonzero write bulk status received: %d\n", __func__, status); + dev_dbg(&urb->dev->dev, "%s(): overflow in write\n", __func__); + + port->write_urb->transfer_buffer_length = 1; + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (result) { + dev_err_console(port, "%s(): usb_submit_urb() failed," + " error %d\n", __func__, result); + } else { + return; + } + } + + priv->flags.write_urb_in_use = 0; + + /* schedule the interrupt urb if we are still open */ + dev_dbg(&port->dev, "%s(): submitting interrupt urb\n", __func__); + result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); + if (result != 0) { + dev_err(&port->dev, "%s(): failed submitting int urb," + " error %d\n", __func__, result); + } +} + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_DESCRIPTION(OTI6858_DESCRIPTION); +MODULE_AUTHOR(OTI6858_AUTHOR); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/oti6858.h b/kernel/drivers/usb/serial/oti6858.h new file mode 100644 index 000000000..704ac3a53 --- /dev/null +++ b/kernel/drivers/usb/serial/oti6858.h @@ -0,0 +1,15 @@ +/* + * Ours Technology Inc. OTi-6858 USB to serial adapter driver. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __LINUX_USB_SERIAL_OTI6858_H +#define __LINUX_USB_SERIAL_OTI6858_H + +#define OTI6858_VENDOR_ID 0x0ea0 +#define OTI6858_PRODUCT_ID 0x6858 + +#endif diff --git a/kernel/drivers/usb/serial/pl2303.c b/kernel/drivers/usb/serial/pl2303.c new file mode 100644 index 000000000..f5257af33 --- /dev/null +++ b/kernel/drivers/usb/serial/pl2303.c @@ -0,0 +1,948 @@ +/* + * Prolific PL2303 USB to serial adaptor driver + * + * Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2003 IBM Corp. + * + * Original driver for 2.2.x by anonymous + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * See Documentation/usb/usb-serial.txt for more information on using this + * driver + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/serial.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <asm/unaligned.h> +#include "pl2303.h" + + +#define PL2303_QUIRK_UART_STATE_IDX0 BIT(0) +#define PL2303_QUIRK_LEGACY BIT(1) + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) }, + { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, + { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, + { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) }, + { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) }, + { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) }, + { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) }, + { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) }, + { USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) }, + { USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) }, + { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) }, + { USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) }, + { USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) }, + { USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) }, + { USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) }, + { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) }, + { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1), + .driver_info = PL2303_QUIRK_UART_STATE_IDX0 }, + { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65), + .driver_info = PL2303_QUIRK_UART_STATE_IDX0 }, + { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75), + .driver_info = PL2303_QUIRK_UART_STATE_IDX0 }, + { USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81) }, + { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_ID_S81) }, /* Benq/Siemens S81 */ + { USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) }, + { USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) }, + { USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) }, + { USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) }, + { USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) }, + { USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) }, + { USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) }, + { USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) }, + { USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) }, + { USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) }, + { USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) }, + { USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) }, + { USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) }, + { USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) }, + { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) }, + { USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) }, + { USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) }, + { USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) }, + { USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table); + +#define SET_LINE_REQUEST_TYPE 0x21 +#define SET_LINE_REQUEST 0x20 + +#define SET_CONTROL_REQUEST_TYPE 0x21 +#define SET_CONTROL_REQUEST 0x22 +#define CONTROL_DTR 0x01 +#define CONTROL_RTS 0x02 + +#define BREAK_REQUEST_TYPE 0x21 +#define BREAK_REQUEST 0x23 +#define BREAK_ON 0xffff +#define BREAK_OFF 0x0000 + +#define GET_LINE_REQUEST_TYPE 0xa1 +#define GET_LINE_REQUEST 0x21 + +#define VENDOR_WRITE_REQUEST_TYPE 0x40 +#define VENDOR_WRITE_REQUEST 0x01 + +#define VENDOR_READ_REQUEST_TYPE 0xc0 +#define VENDOR_READ_REQUEST 0x01 + +#define UART_STATE_INDEX 8 +#define UART_STATE_MSR_MASK 0x8b +#define UART_STATE_TRANSIENT_MASK 0x74 +#define UART_DCD 0x01 +#define UART_DSR 0x02 +#define UART_BREAK_ERROR 0x04 +#define UART_RING 0x08 +#define UART_FRAME_ERROR 0x10 +#define UART_PARITY_ERROR 0x20 +#define UART_OVERRUN_ERROR 0x40 +#define UART_CTS 0x80 + +static void pl2303_set_break(struct usb_serial_port *port, bool enable); + +enum pl2303_type { + TYPE_01, /* Type 0 and 1 (difference unknown) */ + TYPE_HX, /* HX version of the pl2303 chip */ + TYPE_COUNT +}; + +struct pl2303_type_data { + speed_t max_baud_rate; + unsigned long quirks; +}; + +struct pl2303_serial_private { + const struct pl2303_type_data *type; + unsigned long quirks; +}; + +struct pl2303_private { + spinlock_t lock; + u8 line_control; + u8 line_status; + + u8 line_settings[7]; +}; + +static const struct pl2303_type_data pl2303_type_data[TYPE_COUNT] = { + [TYPE_01] = { + .max_baud_rate = 1228800, + .quirks = PL2303_QUIRK_LEGACY, + }, + [TYPE_HX] = { + .max_baud_rate = 12000000, + }, +}; + +static int pl2303_vendor_read(struct usb_serial *serial, u16 value, + unsigned char buf[1]) +{ + struct device *dev = &serial->interface->dev; + int res; + + res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + VENDOR_READ_REQUEST, VENDOR_READ_REQUEST_TYPE, + value, 0, buf, 1, 100); + if (res != 1) { + dev_err(dev, "%s - failed to read [%04x]: %d\n", __func__, + value, res); + if (res >= 0) + res = -EIO; + + return res; + } + + dev_dbg(dev, "%s - [%04x] = %02x\n", __func__, value, buf[0]); + + return 0; +} + +static int pl2303_vendor_write(struct usb_serial *serial, u16 value, u16 index) +{ + struct device *dev = &serial->interface->dev; + int res; + + dev_dbg(dev, "%s - [%04x] = %02x\n", __func__, value, index); + + res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE, + value, index, NULL, 0, 100); + if (res) { + dev_err(dev, "%s - failed to write [%04x]: %d\n", __func__, + value, res); + return res; + } + + return 0; +} + +static int pl2303_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + usb_set_serial_data(serial, (void *)id->driver_info); + + return 0; +} + +static int pl2303_startup(struct usb_serial *serial) +{ + struct pl2303_serial_private *spriv; + enum pl2303_type type = TYPE_01; + unsigned char *buf; + + spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); + if (!spriv) + return -ENOMEM; + + buf = kmalloc(1, GFP_KERNEL); + if (!buf) { + kfree(spriv); + return -ENOMEM; + } + + if (serial->dev->descriptor.bDeviceClass == 0x02) + type = TYPE_01; /* type 0 */ + else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40) + type = TYPE_HX; + else if (serial->dev->descriptor.bDeviceClass == 0x00) + type = TYPE_01; /* type 1 */ + else if (serial->dev->descriptor.bDeviceClass == 0xFF) + type = TYPE_01; /* type 1 */ + dev_dbg(&serial->interface->dev, "device type: %d\n", type); + + spriv->type = &pl2303_type_data[type]; + spriv->quirks = (unsigned long)usb_get_serial_data(serial); + spriv->quirks |= spriv->type->quirks; + + usb_set_serial_data(serial, spriv); + + pl2303_vendor_read(serial, 0x8484, buf); + pl2303_vendor_write(serial, 0x0404, 0); + pl2303_vendor_read(serial, 0x8484, buf); + pl2303_vendor_read(serial, 0x8383, buf); + pl2303_vendor_read(serial, 0x8484, buf); + pl2303_vendor_write(serial, 0x0404, 1); + pl2303_vendor_read(serial, 0x8484, buf); + pl2303_vendor_read(serial, 0x8383, buf); + pl2303_vendor_write(serial, 0, 1); + pl2303_vendor_write(serial, 1, 0); + if (spriv->quirks & PL2303_QUIRK_LEGACY) + pl2303_vendor_write(serial, 2, 0x24); + else + pl2303_vendor_write(serial, 2, 0x44); + + kfree(buf); + + return 0; +} + +static void pl2303_release(struct usb_serial *serial) +{ + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); + + kfree(spriv); +} + +static int pl2303_port_probe(struct usb_serial_port *port) +{ + struct pl2303_private *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + + usb_set_serial_port_data(port, priv); + + port->port.drain_delay = 256; + + return 0; +} + +static int pl2303_port_remove(struct usb_serial_port *port) +{ + struct pl2303_private *priv = usb_get_serial_port_data(port); + + kfree(priv); + + return 0; +} + +static int pl2303_set_control_lines(struct usb_serial_port *port, u8 value) +{ + struct usb_device *dev = port->serial->dev; + int retval; + + dev_dbg(&port->dev, "%s - %02x\n", __func__, value); + + retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE, + value, 0, NULL, 0, 100); + if (retval) + dev_err(&port->dev, "%s - failed: %d\n", __func__, retval); + + return retval; +} + +/* + * Returns the nearest supported baud rate that can be set directly without + * using divisors. + */ +static speed_t pl2303_get_supported_baud_rate(speed_t baud) +{ + static const speed_t baud_sup[] = { + 75, 150, 300, 600, 1200, 1800, 2400, 3600, 4800, 7200, 9600, + 14400, 19200, 28800, 38400, 57600, 115200, 230400, 460800, + 614400, 921600, 1228800, 2457600, 3000000, 6000000 + }; + + unsigned i; + + for (i = 0; i < ARRAY_SIZE(baud_sup); ++i) { + if (baud_sup[i] > baud) + break; + } + + if (i == ARRAY_SIZE(baud_sup)) + baud = baud_sup[i - 1]; + else if (i > 0 && (baud_sup[i] - baud) > (baud - baud_sup[i - 1])) + baud = baud_sup[i - 1]; + else + baud = baud_sup[i]; + + return baud; +} + +/* + * NOTE: If unsupported baud rates are set directly, the PL2303 seems to + * use 9600 baud. + */ +static speed_t pl2303_encode_baud_rate_direct(unsigned char buf[4], + speed_t baud) +{ + put_unaligned_le32(baud, buf); + + return baud; +} + +static speed_t pl2303_encode_baud_rate_divisor(unsigned char buf[4], + speed_t baud) +{ + unsigned int tmp; + + /* + * Apparently the formula is: + * baudrate = 12M * 32 / (2^buf[1]) / buf[0] + */ + tmp = 12000000 * 32 / baud; + buf[3] = 0x80; + buf[2] = 0; + buf[1] = (tmp >= 256); + while (tmp >= 256) { + tmp >>= 2; + buf[1] <<= 1; + } + buf[0] = tmp; + + return baud; +} + +static void pl2303_encode_baud_rate(struct tty_struct *tty, + struct usb_serial_port *port, + u8 buf[4]) +{ + struct usb_serial *serial = port->serial; + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); + speed_t baud_sup; + speed_t baud; + + baud = tty_get_baud_rate(tty); + dev_dbg(&port->dev, "baud requested = %u\n", baud); + if (!baud) + return; + + if (spriv->type->max_baud_rate) + baud = min_t(speed_t, baud, spriv->type->max_baud_rate); + /* + * Use direct method for supported baud rates, otherwise use divisors. + */ + baud_sup = pl2303_get_supported_baud_rate(baud); + + if (baud == baud_sup) + baud = pl2303_encode_baud_rate_direct(buf, baud); + else + baud = pl2303_encode_baud_rate_divisor(buf, baud); + + /* Save resulting baud rate */ + tty_encode_baud_rate(tty, baud, baud); + dev_dbg(&port->dev, "baud set = %u\n", baud); +} + +static int pl2303_get_line_request(struct usb_serial_port *port, + unsigned char buf[7]) +{ + struct usb_device *udev = port->serial->dev; + int ret; + + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), + GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE, + 0, 0, buf, 7, 100); + if (ret != 7) { + dev_err(&port->dev, "%s - failed: %d\n", __func__, ret); + + if (ret > 0) + ret = -EIO; + + return ret; + } + + dev_dbg(&port->dev, "%s - %7ph\n", __func__, buf); + + return 0; +} + +static int pl2303_set_line_request(struct usb_serial_port *port, + unsigned char buf[7]) +{ + struct usb_device *udev = port->serial->dev; + int ret; + + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE, + 0, 0, buf, 7, 100); + if (ret != 7) { + dev_err(&port->dev, "%s - failed: %d\n", __func__, ret); + + if (ret > 0) + ret = -EIO; + + return ret; + } + + dev_dbg(&port->dev, "%s - %7ph\n", __func__, buf); + + return 0; +} + +static void pl2303_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + struct usb_serial *serial = port->serial; + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); + struct pl2303_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + unsigned char *buf; + int ret; + u8 control; + + if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) + return; + + buf = kzalloc(7, GFP_KERNEL); + if (!buf) { + /* Report back no change occurred */ + if (old_termios) + tty->termios = *old_termios; + return; + } + + pl2303_get_line_request(port, buf); + + switch (C_CSIZE(tty)) { + case CS5: + buf[6] = 5; + break; + case CS6: + buf[6] = 6; + break; + case CS7: + buf[6] = 7; + break; + default: + case CS8: + buf[6] = 8; + } + dev_dbg(&port->dev, "data bits = %d\n", buf[6]); + + /* For reference buf[0]:buf[3] baud rate value */ + pl2303_encode_baud_rate(tty, port, &buf[0]); + + /* For reference buf[4]=0 is 1 stop bits */ + /* For reference buf[4]=1 is 1.5 stop bits */ + /* For reference buf[4]=2 is 2 stop bits */ + if (C_CSTOPB(tty)) { + /* + * NOTE: Comply with "real" UARTs / RS232: + * use 1.5 instead of 2 stop bits with 5 data bits + */ + if (C_CSIZE(tty) == CS5) { + buf[4] = 1; + dev_dbg(&port->dev, "stop bits = 1.5\n"); + } else { + buf[4] = 2; + dev_dbg(&port->dev, "stop bits = 2\n"); + } + } else { + buf[4] = 0; + dev_dbg(&port->dev, "stop bits = 1\n"); + } + + if (C_PARENB(tty)) { + /* For reference buf[5]=0 is none parity */ + /* For reference buf[5]=1 is odd parity */ + /* For reference buf[5]=2 is even parity */ + /* For reference buf[5]=3 is mark parity */ + /* For reference buf[5]=4 is space parity */ + if (C_PARODD(tty)) { + if (C_CMSPAR(tty)) { + buf[5] = 3; + dev_dbg(&port->dev, "parity = mark\n"); + } else { + buf[5] = 1; + dev_dbg(&port->dev, "parity = odd\n"); + } + } else { + if (C_CMSPAR(tty)) { + buf[5] = 4; + dev_dbg(&port->dev, "parity = space\n"); + } else { + buf[5] = 2; + dev_dbg(&port->dev, "parity = even\n"); + } + } + } else { + buf[5] = 0; + dev_dbg(&port->dev, "parity = none\n"); + } + + /* + * Some PL2303 are known to lose bytes if you change serial settings + * even to the same values as before. Thus we actually need to filter + * in this specific case. + * + * Note that the tty_termios_hw_change check above is not sufficient + * as a previously requested baud rate may differ from the one + * actually used (and stored in old_termios). + * + * NOTE: No additional locking needed for line_settings as it is + * only used in set_termios, which is serialised against itself. + */ + if (!old_termios || memcmp(buf, priv->line_settings, 7)) { + ret = pl2303_set_line_request(port, buf); + if (!ret) + memcpy(priv->line_settings, buf, 7); + } + + /* change control lines if we are switching to or from B0 */ + spin_lock_irqsave(&priv->lock, flags); + control = priv->line_control; + if (C_BAUD(tty) == B0) + priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); + else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) + priv->line_control |= (CONTROL_DTR | CONTROL_RTS); + if (control != priv->line_control) { + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + pl2303_set_control_lines(port, control); + } else { + spin_unlock_irqrestore(&priv->lock, flags); + } + + if (C_CRTSCTS(tty)) { + if (spriv->quirks & PL2303_QUIRK_LEGACY) + pl2303_vendor_write(serial, 0x0, 0x41); + else + pl2303_vendor_write(serial, 0x0, 0x61); + } else { + pl2303_vendor_write(serial, 0x0, 0x0); + } + + kfree(buf); +} + +static void pl2303_dtr_rts(struct usb_serial_port *port, int on) +{ + struct pl2303_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 control; + + spin_lock_irqsave(&priv->lock, flags); + if (on) + priv->line_control |= (CONTROL_DTR | CONTROL_RTS); + else + priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS); + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + + pl2303_set_control_lines(port, control); +} + +static void pl2303_close(struct usb_serial_port *port) +{ + usb_serial_generic_close(port); + usb_kill_urb(port->interrupt_in_urb); + pl2303_set_break(port, false); +} + +static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); + int result; + + if (spriv->quirks & PL2303_QUIRK_LEGACY) { + usb_clear_halt(serial->dev, port->write_urb->pipe); + usb_clear_halt(serial->dev, port->read_urb->pipe); + } else { + /* reset upstream data pipes */ + pl2303_vendor_write(serial, 8, 0); + pl2303_vendor_write(serial, 9, 0); + } + + /* Setup termios */ + if (tty) + pl2303_set_termios(tty, port, NULL); + + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result) { + dev_err(&port->dev, "failed to submit interrupt urb: %d\n", + result); + return result; + } + + result = usb_serial_generic_open(tty, port); + if (result) { + usb_kill_urb(port->interrupt_in_urb); + return result; + } + + return 0; +} + +static int pl2303_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct pl2303_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 control; + int ret; + + spin_lock_irqsave(&priv->lock, flags); + if (set & TIOCM_RTS) + priv->line_control |= CONTROL_RTS; + if (set & TIOCM_DTR) + priv->line_control |= CONTROL_DTR; + if (clear & TIOCM_RTS) + priv->line_control &= ~CONTROL_RTS; + if (clear & TIOCM_DTR) + priv->line_control &= ~CONTROL_DTR; + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + + ret = pl2303_set_control_lines(port, control); + if (ret) + return usb_translate_errors(ret); + + return 0; +} + +static int pl2303_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct pl2303_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + unsigned int mcr; + unsigned int status; + unsigned int result; + + spin_lock_irqsave(&priv->lock, flags); + mcr = priv->line_control; + status = priv->line_status; + spin_unlock_irqrestore(&priv->lock, flags); + + result = ((mcr & CONTROL_DTR) ? TIOCM_DTR : 0) + | ((mcr & CONTROL_RTS) ? TIOCM_RTS : 0) + | ((status & UART_CTS) ? TIOCM_CTS : 0) + | ((status & UART_DSR) ? TIOCM_DSR : 0) + | ((status & UART_RING) ? TIOCM_RI : 0) + | ((status & UART_DCD) ? TIOCM_CD : 0); + + dev_dbg(&port->dev, "%s - result = %x\n", __func__, result); + + return result; +} + +static int pl2303_carrier_raised(struct usb_serial_port *port) +{ + struct pl2303_private *priv = usb_get_serial_port_data(port); + + if (priv->line_status & UART_DCD) + return 1; + + return 0; +} + +static int pl2303_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct serial_struct ser; + struct usb_serial_port *port = tty->driver_data; + + switch (cmd) { + case TIOCGSERIAL: + memset(&ser, 0, sizeof ser); + ser.type = PORT_16654; + ser.line = port->minor; + ser.port = port->port_number; + ser.baud_base = 460800; + + if (copy_to_user((void __user *)arg, &ser, sizeof ser)) + return -EFAULT; + + return 0; + default: + break; + } + + return -ENOIOCTLCMD; +} + +static void pl2303_set_break(struct usb_serial_port *port, bool enable) +{ + struct usb_serial *serial = port->serial; + u16 state; + int result; + + if (enable) + state = BREAK_ON; + else + state = BREAK_OFF; + + dev_dbg(&port->dev, "%s - turning break %s\n", __func__, + state == BREAK_OFF ? "off" : "on"); + + result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + BREAK_REQUEST, BREAK_REQUEST_TYPE, state, + 0, NULL, 0, 100); + if (result) + dev_err(&port->dev, "error sending break = %d\n", result); +} + +static void pl2303_break_ctl(struct tty_struct *tty, int state) +{ + struct usb_serial_port *port = tty->driver_data; + + pl2303_set_break(port, state); +} + +static void pl2303_update_line_status(struct usb_serial_port *port, + unsigned char *data, + unsigned int actual_length) +{ + struct usb_serial *serial = port->serial; + struct pl2303_serial_private *spriv = usb_get_serial_data(serial); + struct pl2303_private *priv = usb_get_serial_port_data(port); + struct tty_struct *tty; + unsigned long flags; + unsigned int status_idx = UART_STATE_INDEX; + u8 status; + u8 delta; + + if (spriv->quirks & PL2303_QUIRK_UART_STATE_IDX0) + status_idx = 0; + + if (actual_length < status_idx + 1) + return; + + status = data[status_idx]; + + /* Save off the uart status for others to look at */ + spin_lock_irqsave(&priv->lock, flags); + delta = priv->line_status ^ status; + priv->line_status = status; + spin_unlock_irqrestore(&priv->lock, flags); + + if (status & UART_BREAK_ERROR) + usb_serial_handle_break(port); + + if (delta & UART_STATE_MSR_MASK) { + if (delta & UART_CTS) + port->icount.cts++; + if (delta & UART_DSR) + port->icount.dsr++; + if (delta & UART_RING) + port->icount.rng++; + if (delta & UART_DCD) { + port->icount.dcd++; + tty = tty_port_tty_get(&port->port); + if (tty) { + usb_serial_handle_dcd_change(port, tty, + status & UART_DCD); + tty_kref_put(tty); + } + } + + wake_up_interruptible(&port->port.delta_msr_wait); + } +} + +static void pl2303_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + unsigned int actual_length = urb->actual_length; + int status = urb->status; + int retval; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", + __func__, status); + goto exit; + } + + usb_serial_debug_data(&port->dev, __func__, + urb->actual_length, urb->transfer_buffer); + + pl2303_update_line_status(port, data, actual_length); + +exit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) { + dev_err(&port->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, retval); + } +} + +static void pl2303_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct pl2303_private *priv = usb_get_serial_port_data(port); + unsigned char *data = urb->transfer_buffer; + char tty_flag = TTY_NORMAL; + unsigned long flags; + u8 line_status; + int i; + + /* update line status */ + spin_lock_irqsave(&priv->lock, flags); + line_status = priv->line_status; + priv->line_status &= ~UART_STATE_TRANSIENT_MASK; + spin_unlock_irqrestore(&priv->lock, flags); + + if (!urb->actual_length) + return; + + /* + * Break takes precedence over parity, which takes precedence over + * framing errors. + */ + if (line_status & UART_BREAK_ERROR) + tty_flag = TTY_BREAK; + else if (line_status & UART_PARITY_ERROR) + tty_flag = TTY_PARITY; + else if (line_status & UART_FRAME_ERROR) + tty_flag = TTY_FRAME; + + if (tty_flag != TTY_NORMAL) + dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__, + tty_flag); + /* overrun is special, not associated with a char */ + if (line_status & UART_OVERRUN_ERROR) + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); + + if (port->port.console && port->sysrq) { + for (i = 0; i < urb->actual_length; ++i) + if (!usb_serial_handle_sysrq_char(port, data[i])) + tty_insert_flip_char(&port->port, data[i], + tty_flag); + } else { + tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag, + urb->actual_length); + } + + tty_flip_buffer_push(&port->port); +} + +static struct usb_serial_driver pl2303_device = { + .driver = { + .owner = THIS_MODULE, + .name = "pl2303", + }, + .id_table = id_table, + .num_ports = 1, + .bulk_in_size = 256, + .bulk_out_size = 256, + .open = pl2303_open, + .close = pl2303_close, + .dtr_rts = pl2303_dtr_rts, + .carrier_raised = pl2303_carrier_raised, + .ioctl = pl2303_ioctl, + .break_ctl = pl2303_break_ctl, + .set_termios = pl2303_set_termios, + .tiocmget = pl2303_tiocmget, + .tiocmset = pl2303_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .process_read_urb = pl2303_process_read_urb, + .read_int_callback = pl2303_read_int_callback, + .probe = pl2303_probe, + .attach = pl2303_startup, + .release = pl2303_release, + .port_probe = pl2303_port_probe, + .port_remove = pl2303_port_remove, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &pl2303_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_DESCRIPTION("Prolific PL2303 USB to serial adaptor driver"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/pl2303.h b/kernel/drivers/usb/serial/pl2303.h new file mode 100644 index 000000000..e3b7af8ad --- /dev/null +++ b/kernel/drivers/usb/serial/pl2303.h @@ -0,0 +1,151 @@ +/* + * Prolific PL2303 USB to serial adaptor driver header file + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#define BENQ_VENDOR_ID 0x04a5 +#define BENQ_PRODUCT_ID_S81 0x4027 + +#define PL2303_VENDOR_ID 0x067b +#define PL2303_PRODUCT_ID 0x2303 +#define PL2303_PRODUCT_ID_RSAQ2 0x04bb +#define PL2303_PRODUCT_ID_DCU11 0x1234 +#define PL2303_PRODUCT_ID_PHAROS 0xaaa0 +#define PL2303_PRODUCT_ID_RSAQ3 0xaaa2 +#define PL2303_PRODUCT_ID_ALDIGA 0x0611 +#define PL2303_PRODUCT_ID_MMX 0x0612 +#define PL2303_PRODUCT_ID_GPRS 0x0609 +#define PL2303_PRODUCT_ID_HCR331 0x331a +#define PL2303_PRODUCT_ID_MOTOROLA 0x0307 +#define PL2303_PRODUCT_ID_ZTEK 0xe1f1 + +#define ATEN_VENDOR_ID 0x0557 +#define ATEN_VENDOR_ID2 0x0547 +#define ATEN_PRODUCT_ID 0x2008 + +#define IODATA_VENDOR_ID 0x04bb +#define IODATA_PRODUCT_ID 0x0a03 +#define IODATA_PRODUCT_ID_RSAQ5 0x0a0e + +#define ELCOM_VENDOR_ID 0x056e +#define ELCOM_PRODUCT_ID 0x5003 +#define ELCOM_PRODUCT_ID_UCSGT 0x5004 + +#define ITEGNO_VENDOR_ID 0x0eba +#define ITEGNO_PRODUCT_ID 0x1080 +#define ITEGNO_PRODUCT_ID_2080 0x2080 + +#define MA620_VENDOR_ID 0x0df7 +#define MA620_PRODUCT_ID 0x0620 + +#define RATOC_VENDOR_ID 0x0584 +#define RATOC_PRODUCT_ID 0xb000 + +#define TRIPP_VENDOR_ID 0x2478 +#define TRIPP_PRODUCT_ID 0x2008 + +#define RADIOSHACK_VENDOR_ID 0x1453 +#define RADIOSHACK_PRODUCT_ID 0x4026 + +#define DCU10_VENDOR_ID 0x0731 +#define DCU10_PRODUCT_ID 0x0528 + +#define SITECOM_VENDOR_ID 0x6189 +#define SITECOM_PRODUCT_ID 0x2068 + +/* Alcatel OT535/735 USB cable */ +#define ALCATEL_VENDOR_ID 0x11f7 +#define ALCATEL_PRODUCT_ID 0x02df + +#define SIEMENS_VENDOR_ID 0x11f5 +#define SIEMENS_PRODUCT_ID_SX1 0x0001 +#define SIEMENS_PRODUCT_ID_X65 0x0003 +#define SIEMENS_PRODUCT_ID_X75 0x0004 +#define SIEMENS_PRODUCT_ID_EF81 0x0005 + +#define SYNTECH_VENDOR_ID 0x0745 +#define SYNTECH_PRODUCT_ID 0x0001 + +/* Nokia CA-42 Cable */ +#define NOKIA_CA42_VENDOR_ID 0x078b +#define NOKIA_CA42_PRODUCT_ID 0x1234 + +/* CA-42 CLONE Cable www.ca-42.com chipset: Prolific Technology Inc */ +#define CA_42_CA42_VENDOR_ID 0x10b5 +#define CA_42_CA42_PRODUCT_ID 0xac70 + +#define SAGEM_VENDOR_ID 0x079b +#define SAGEM_PRODUCT_ID 0x0027 + +/* Leadtek GPS 9531 (ID 0413:2101) */ +#define LEADTEK_VENDOR_ID 0x0413 +#define LEADTEK_9531_PRODUCT_ID 0x2101 + +/* USB GSM cable from Speed Dragon Multimedia, Ltd */ +#define SPEEDDRAGON_VENDOR_ID 0x0e55 +#define SPEEDDRAGON_PRODUCT_ID 0x110b + +/* DATAPILOT Universal-2 Phone Cable */ +#define DATAPILOT_U2_VENDOR_ID 0x0731 +#define DATAPILOT_U2_PRODUCT_ID 0x2003 + +/* Belkin "F5U257" Serial Adapter */ +#define BELKIN_VENDOR_ID 0x050d +#define BELKIN_PRODUCT_ID 0x0257 + +/* Alcor Micro Corp. USB 2.0 TO RS-232 */ +#define ALCOR_VENDOR_ID 0x058F +#define ALCOR_PRODUCT_ID 0x9720 + +/* Willcom WS002IN Data Driver (by NetIndex Inc.) */ +#define WS002IN_VENDOR_ID 0x11f6 +#define WS002IN_PRODUCT_ID 0x2001 + +/* Corega CG-USBRS232R Serial Adapter */ +#define COREGA_VENDOR_ID 0x07aa +#define COREGA_PRODUCT_ID 0x002a + +/* Y.C. Cable U.S.A., Inc - USB to RS-232 */ +#define YCCABLE_VENDOR_ID 0x05ad +#define YCCABLE_PRODUCT_ID 0x0fba + +/* "Superial" USB - Serial */ +#define SUPERIAL_VENDOR_ID 0x5372 +#define SUPERIAL_PRODUCT_ID 0x2303 + +/* Hewlett-Packard POS Pole Displays */ +#define HP_VENDOR_ID 0x03f0 +#define HP_LD960_PRODUCT_ID 0x0b39 +#define HP_LCM220_PRODUCT_ID 0x3139 +#define HP_LCM960_PRODUCT_ID 0x3239 +#define HP_LD220_PRODUCT_ID 0x3524 + +/* Cressi Edy (diving computer) PC interface */ +#define CRESSI_VENDOR_ID 0x04b8 +#define CRESSI_EDY_PRODUCT_ID 0x0521 + +/* Zeagle dive computer interface */ +#define ZEAGLE_VENDOR_ID 0x04b8 +#define ZEAGLE_N2ITION3_PRODUCT_ID 0x0522 + +/* Sony, USB data cable for CMD-Jxx mobile phones */ +#define SONY_VENDOR_ID 0x054c +#define SONY_QN3USB_PRODUCT_ID 0x0437 + +/* Sanwa KB-USB2 multimeter cable (ID: 11ad:0001) */ +#define SANWA_VENDOR_ID 0x11ad +#define SANWA_PRODUCT_ID 0x0001 + +/* ADLINK ND-6530 RS232,RS485 and RS422 adapter */ +#define ADLINK_VENDOR_ID 0x0b63 +#define ADLINK_ND6530_PRODUCT_ID 0x6530 + +/* SMART USB Serial Adapter */ +#define SMART_VENDOR_ID 0x0b8c +#define SMART_PRODUCT_ID 0x2303 + diff --git a/kernel/drivers/usb/serial/qcaux.c b/kernel/drivers/usb/serial/qcaux.c new file mode 100644 index 000000000..6e9f8af96 --- /dev/null +++ b/kernel/drivers/usb/serial/qcaux.c @@ -0,0 +1,90 @@ +/* + * Qualcomm USB Auxiliary Serial Port driver + * + * Copyright (C) 2008 Greg Kroah-Hartman <greg@kroah.com> + * Copyright (C) 2010 Dan Williams <dcbw@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Devices listed here usually provide a CDC ACM port on which normal modem + * AT commands and PPP can be used. But when that port is in-use by PPP it + * cannot be used simultaneously for status or signal strength. Instead, the + * ports here can be queried for that information using the Qualcomm DM + * protocol. + */ + +#include <linux/kernel.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +/* NOTE: for now, only use this driver for devices that provide a CDC-ACM port + * for normal AT commands, but also provide secondary USB interfaces for the + * QCDM-capable ports. Devices that do not provide a CDC-ACM port should + * probably be driven by option.ko. + */ + +/* UTStarcom/Pantech/Curitel devices */ +#define UTSTARCOM_VENDOR_ID 0x106c +#define UTSTARCOM_PRODUCT_PC5740 0x3701 +#define UTSTARCOM_PRODUCT_PC5750 0x3702 /* aka Pantech PX-500 */ +#define UTSTARCOM_PRODUCT_UM150 0x3711 +#define UTSTARCOM_PRODUCT_UM175_V1 0x3712 +#define UTSTARCOM_PRODUCT_UM175_V2 0x3714 +#define UTSTARCOM_PRODUCT_UM175_ALLTEL 0x3715 + +/* CMOTECH devices */ +#define CMOTECH_VENDOR_ID 0x16d8 +#define CMOTECH_PRODUCT_CDU550 0x5553 +#define CMOTECH_PRODUCT_CDX650 0x6512 + +/* LG devices */ +#define LG_VENDOR_ID 0x1004 +#define LG_PRODUCT_VX4400_6000 0x6000 /* VX4400/VX6000/Rumor */ + +/* Sanyo devices */ +#define SANYO_VENDOR_ID 0x0474 +#define SANYO_PRODUCT_KATANA_LX 0x0754 /* SCP-3800 (Katana LX) */ + +/* Samsung devices */ +#define SAMSUNG_VENDOR_ID 0x04e8 +#define SAMSUNG_PRODUCT_U520 0x6640 /* SCH-U520 */ + +static const struct usb_device_id id_table[] = { + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5740, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_PC5750, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM150, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_V1, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_V2, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, UTSTARCOM_PRODUCT_UM175_ALLTEL, 0xff, 0x00, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU550, 0xff, 0xff, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDX650, 0xff, 0xff, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) }, + { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) }, + { USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfd, 0xff) }, /* NMEA */ + { USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfe, 0xff) }, /* WMC */ + { USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xff, 0xff) }, /* DIAG */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1fac, 0x0151, 0xff, 0xff, 0xff) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_serial_driver qcaux_device = { + .driver = { + .owner = THIS_MODULE, + .name = "qcaux", + }, + .id_table = id_table, + .num_ports = 1, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &qcaux_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/qcserial.c b/kernel/drivers/usb/serial/qcserial.c new file mode 100644 index 000000000..9c63897b3 --- /dev/null +++ b/kernel/drivers/usb/serial/qcserial.c @@ -0,0 +1,397 @@ +/* + * Qualcomm Serial USB driver + * + * Copyright (c) 2008 QUALCOMM Incorporated. + * Copyright (c) 2009 Greg Kroah-Hartman <gregkh@suse.de> + * Copyright (c) 2009 Novell Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + */ + +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/slab.h> +#include "usb-wwan.h" + +#define DRIVER_AUTHOR "Qualcomm Inc" +#define DRIVER_DESC "Qualcomm USB Serial driver" + +/* standard device layouts supported by this driver */ +enum qcserial_layouts { + QCSERIAL_G2K = 0, /* Gobi 2000 */ + QCSERIAL_G1K = 1, /* Gobi 1000 */ + QCSERIAL_SWI = 2, /* Sierra Wireless */ + QCSERIAL_HWI = 3, /* Huawei */ +}; + +#define DEVICE_G1K(v, p) \ + USB_DEVICE(v, p), .driver_info = QCSERIAL_G1K +#define DEVICE_SWI(v, p) \ + USB_DEVICE(v, p), .driver_info = QCSERIAL_SWI +#define DEVICE_HWI(v, p) \ + USB_DEVICE(v, p), .driver_info = QCSERIAL_HWI + +static const struct usb_device_id id_table[] = { + /* Gobi 1000 devices */ + {DEVICE_G1K(0x05c6, 0x9211)}, /* Acer Gobi QDL device */ + {DEVICE_G1K(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ + {DEVICE_G1K(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ + {DEVICE_G1K(0x03f0, 0x201d)}, /* HP un2400 Gobi QDL Device */ + {DEVICE_G1K(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */ + {DEVICE_G1K(0x04da, 0x250c)}, /* Panasonic Gobi QDL device */ + {DEVICE_G1K(0x413c, 0x8172)}, /* Dell Gobi Modem device */ + {DEVICE_G1K(0x413c, 0x8171)}, /* Dell Gobi QDL device */ + {DEVICE_G1K(0x1410, 0xa001)}, /* Novatel/Verizon USB-1000 */ + {DEVICE_G1K(0x1410, 0xa002)}, /* Novatel Gobi Modem device */ + {DEVICE_G1K(0x1410, 0xa003)}, /* Novatel Gobi Modem device */ + {DEVICE_G1K(0x1410, 0xa004)}, /* Novatel Gobi Modem device */ + {DEVICE_G1K(0x1410, 0xa005)}, /* Novatel Gobi Modem device */ + {DEVICE_G1K(0x1410, 0xa006)}, /* Novatel Gobi Modem device */ + {DEVICE_G1K(0x1410, 0xa007)}, /* Novatel Gobi Modem device */ + {DEVICE_G1K(0x1410, 0xa008)}, /* Novatel Gobi QDL device */ + {DEVICE_G1K(0x0b05, 0x1776)}, /* Asus Gobi Modem device */ + {DEVICE_G1K(0x0b05, 0x1774)}, /* Asus Gobi QDL device */ + {DEVICE_G1K(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */ + {DEVICE_G1K(0x19d2, 0xfff2)}, /* ONDA Gobi QDL device */ + {DEVICE_G1K(0x1557, 0x0a80)}, /* OQO Gobi QDL device */ + {DEVICE_G1K(0x05c6, 0x9001)}, /* Generic Gobi Modem device */ + {DEVICE_G1K(0x05c6, 0x9002)}, /* Generic Gobi Modem device */ + {DEVICE_G1K(0x05c6, 0x9202)}, /* Generic Gobi Modem device */ + {DEVICE_G1K(0x05c6, 0x9203)}, /* Generic Gobi Modem device */ + {DEVICE_G1K(0x05c6, 0x9222)}, /* Generic Gobi Modem device */ + {DEVICE_G1K(0x05c6, 0x9008)}, /* Generic Gobi QDL device */ + {DEVICE_G1K(0x05c6, 0x9009)}, /* Generic Gobi Modem device */ + {DEVICE_G1K(0x05c6, 0x9201)}, /* Generic Gobi QDL device */ + {DEVICE_G1K(0x05c6, 0x9221)}, /* Generic Gobi QDL device */ + {DEVICE_G1K(0x05c6, 0x9231)}, /* Generic Gobi QDL device */ + {DEVICE_G1K(0x1f45, 0x0001)}, /* Unknown Gobi QDL device */ + {DEVICE_G1K(0x1bc7, 0x900e)}, /* Telit Gobi QDL device */ + + /* Gobi 2000 devices */ + {USB_DEVICE(0x1410, 0xa010)}, /* Novatel Gobi 2000 QDL device */ + {USB_DEVICE(0x1410, 0xa011)}, /* Novatel Gobi 2000 QDL device */ + {USB_DEVICE(0x1410, 0xa012)}, /* Novatel Gobi 2000 QDL device */ + {USB_DEVICE(0x1410, 0xa013)}, /* Novatel Gobi 2000 QDL device */ + {USB_DEVICE(0x1410, 0xa014)}, /* Novatel Gobi 2000 QDL device */ + {USB_DEVICE(0x413c, 0x8185)}, /* Dell Gobi 2000 QDL device (N0218, VU936) */ + {USB_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */ + {USB_DEVICE(0x05c6, 0x9208)}, /* Generic Gobi 2000 QDL device */ + {USB_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */ + {USB_DEVICE(0x05c6, 0x9224)}, /* Sony Gobi 2000 QDL device (N0279, VU730) */ + {USB_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */ + {USB_DEVICE(0x05c6, 0x9244)}, /* Samsung Gobi 2000 QDL device (VL176) */ + {USB_DEVICE(0x05c6, 0x9245)}, /* Samsung Gobi 2000 Modem device (VL176) */ + {USB_DEVICE(0x03f0, 0x241d)}, /* HP Gobi 2000 QDL device (VP412) */ + {USB_DEVICE(0x03f0, 0x251d)}, /* HP Gobi 2000 Modem device (VP412) */ + {USB_DEVICE(0x05c6, 0x9214)}, /* Acer Gobi 2000 QDL device (VP413) */ + {USB_DEVICE(0x05c6, 0x9215)}, /* Acer Gobi 2000 Modem device (VP413) */ + {USB_DEVICE(0x05c6, 0x9264)}, /* Asus Gobi 2000 QDL device (VR305) */ + {USB_DEVICE(0x05c6, 0x9265)}, /* Asus Gobi 2000 Modem device (VR305) */ + {USB_DEVICE(0x05c6, 0x9234)}, /* Top Global Gobi 2000 QDL device (VR306) */ + {USB_DEVICE(0x05c6, 0x9235)}, /* Top Global Gobi 2000 Modem device (VR306) */ + {USB_DEVICE(0x05c6, 0x9274)}, /* iRex Technologies Gobi 2000 QDL device (VR307) */ + {USB_DEVICE(0x05c6, 0x9275)}, /* iRex Technologies Gobi 2000 Modem device (VR307) */ + {USB_DEVICE(0x1199, 0x9000)}, /* Sierra Wireless Gobi 2000 QDL device (VT773) */ + {USB_DEVICE(0x1199, 0x9001)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {USB_DEVICE(0x1199, 0x9002)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {USB_DEVICE(0x1199, 0x9003)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {USB_DEVICE(0x1199, 0x9004)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {USB_DEVICE(0x1199, 0x9005)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {USB_DEVICE(0x1199, 0x9006)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {USB_DEVICE(0x1199, 0x9007)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {USB_DEVICE(0x1199, 0x9008)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {USB_DEVICE(0x1199, 0x9009)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {USB_DEVICE(0x1199, 0x900a)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */ + {USB_DEVICE(0x1199, 0x9011)}, /* Sierra Wireless Gobi 2000 Modem device (MC8305) */ + {USB_DEVICE(0x16d8, 0x8001)}, /* CMDTech Gobi 2000 QDL device (VU922) */ + {USB_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */ + {USB_DEVICE(0x05c6, 0x9204)}, /* Gobi 2000 QDL device */ + {USB_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */ + + /* Gobi 3000 devices */ + {USB_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Gobi 3000 QDL */ + {USB_DEVICE(0x05c6, 0x920c)}, /* Gobi 3000 QDL */ + {USB_DEVICE(0x05c6, 0x920d)}, /* Gobi 3000 Composite */ + {USB_DEVICE(0x1410, 0xa020)}, /* Novatel Gobi 3000 QDL */ + {USB_DEVICE(0x1410, 0xa021)}, /* Novatel Gobi 3000 Composite */ + {USB_DEVICE(0x413c, 0x8193)}, /* Dell Gobi 3000 QDL */ + {USB_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */ + {USB_DEVICE(0x1199, 0x68a4)}, /* Sierra Wireless QDL */ + {USB_DEVICE(0x1199, 0x68a5)}, /* Sierra Wireless Modem */ + {USB_DEVICE(0x1199, 0x68a8)}, /* Sierra Wireless QDL */ + {USB_DEVICE(0x1199, 0x68a9)}, /* Sierra Wireless Modem */ + {USB_DEVICE(0x1199, 0x9010)}, /* Sierra Wireless Gobi 3000 QDL */ + {USB_DEVICE(0x1199, 0x9012)}, /* Sierra Wireless Gobi 3000 QDL */ + {USB_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */ + {USB_DEVICE(0x1199, 0x9014)}, /* Sierra Wireless Gobi 3000 QDL */ + {USB_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */ + {USB_DEVICE(0x1199, 0x9018)}, /* Sierra Wireless Gobi 3000 QDL */ + {USB_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */ + {USB_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */ + {USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */ + {USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */ + {USB_DEVICE(0x0AF0, 0x8120)}, /* Option GTM681W */ + + /* non-Gobi Sierra Wireless devices */ + {DEVICE_SWI(0x0f3d, 0x68a2)}, /* Sierra Wireless MC7700 */ + {DEVICE_SWI(0x114f, 0x68a2)}, /* Sierra Wireless MC7750 */ + {DEVICE_SWI(0x1199, 0x68a2)}, /* Sierra Wireless MC7710 */ + {DEVICE_SWI(0x1199, 0x901c)}, /* Sierra Wireless EM7700 */ + {DEVICE_SWI(0x1199, 0x901f)}, /* Sierra Wireless EM7355 */ + {DEVICE_SWI(0x1199, 0x9040)}, /* Sierra Wireless Modem */ + {DEVICE_SWI(0x1199, 0x9041)}, /* Sierra Wireless MC7305/MC7355 */ + {DEVICE_SWI(0x1199, 0x9051)}, /* Netgear AirCard 340U */ + {DEVICE_SWI(0x1199, 0x9053)}, /* Sierra Wireless Modem */ + {DEVICE_SWI(0x1199, 0x9054)}, /* Sierra Wireless Modem */ + {DEVICE_SWI(0x1199, 0x9055)}, /* Netgear AirCard 341U */ + {DEVICE_SWI(0x1199, 0x9056)}, /* Sierra Wireless Modem */ + {DEVICE_SWI(0x1199, 0x9060)}, /* Sierra Wireless Modem */ + {DEVICE_SWI(0x1199, 0x9061)}, /* Sierra Wireless Modem */ + {DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */ + {DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */ + {DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */ + {DEVICE_SWI(0x413c, 0x81a8)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */ + {DEVICE_SWI(0x413c, 0x81a9)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */ + + /* Huawei devices */ + {DEVICE_HWI(0x03f0, 0x581d)}, /* HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) */ + + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) +{ + struct usb_host_interface *intf = serial->interface->cur_altsetting; + struct device *dev = &serial->dev->dev; + int retval = -ENODEV; + __u8 nintf; + __u8 ifnum; + int altsetting = -1; + + nintf = serial->dev->actconfig->desc.bNumInterfaces; + dev_dbg(dev, "Num Interfaces = %d\n", nintf); + ifnum = intf->desc.bInterfaceNumber; + dev_dbg(dev, "This Interface = %d\n", ifnum); + + if (nintf == 1) { + /* QDL mode */ + /* Gobi 2000 has a single altsetting, older ones have two */ + if (serial->interface->num_altsetting == 2) + intf = &serial->interface->altsetting[1]; + else if (serial->interface->num_altsetting > 2) + goto done; + + if (intf->desc.bNumEndpoints == 2 && + usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) && + usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) { + dev_dbg(dev, "QDL port found\n"); + + if (serial->interface->num_altsetting == 1) + retval = 0; /* Success */ + else + altsetting = 1; + } + goto done; + + } + + /* default to enabling interface */ + altsetting = 0; + + /* + * Composite mode; don't bind to the QMI/net interface as that + * gets handled by other drivers. + */ + + switch (id->driver_info) { + case QCSERIAL_G1K: + /* + * Gobi 1K USB layout: + * 0: DM/DIAG (use libqcdm from ModemManager for communication) + * 1: serial port (doesn't respond) + * 2: AT-capable modem port + * 3: QMI/net + */ + if (nintf < 3 || nintf > 4) { + dev_err(dev, "unknown number of interfaces: %d\n", nintf); + altsetting = -1; + goto done; + } + + if (ifnum == 0) { + dev_dbg(dev, "Gobi 1K DM/DIAG interface found\n"); + altsetting = 1; + } else if (ifnum == 2) + dev_dbg(dev, "Modem port found\n"); + else + altsetting = -1; + break; + case QCSERIAL_G2K: + /* + * Gobi 2K+ USB layout: + * 0: QMI/net + * 1: DM/DIAG (use libqcdm from ModemManager for communication) + * 2: AT-capable modem port + * 3: NMEA + */ + if (nintf < 3 || nintf > 4) { + dev_err(dev, "unknown number of interfaces: %d\n", nintf); + altsetting = -1; + goto done; + } + + switch (ifnum) { + case 0: + /* Don't claim the QMI/net interface */ + altsetting = -1; + break; + case 1: + dev_dbg(dev, "Gobi 2K+ DM/DIAG interface found\n"); + break; + case 2: + dev_dbg(dev, "Modem port found\n"); + break; + case 3: + /* + * NMEA (serial line 9600 8N1) + * # echo "\$GPS_START" > /dev/ttyUSBx + * # echo "\$GPS_STOP" > /dev/ttyUSBx + */ + dev_dbg(dev, "Gobi 2K+ NMEA GPS interface found\n"); + break; + } + break; + case QCSERIAL_SWI: + /* + * Sierra Wireless layout: + * 0: DM/DIAG (use libqcdm from ModemManager for communication) + * 2: NMEA + * 3: AT-capable modem port + * 8: QMI/net + */ + switch (ifnum) { + case 0: + dev_dbg(dev, "DM/DIAG interface found\n"); + break; + case 2: + dev_dbg(dev, "NMEA GPS interface found\n"); + break; + case 3: + dev_dbg(dev, "Modem port found\n"); + break; + default: + /* don't claim any unsupported interface */ + altsetting = -1; + break; + } + break; + case QCSERIAL_HWI: + /* + * Huawei layout: + * 0: AT-capable modem port + * 1: DM/DIAG + * 2: AT-capable modem port + * 3: CCID-compatible PCSC interface + * 4: QMI/net + * 5: NMEA + */ + switch (ifnum) { + case 0: + case 2: + dev_dbg(dev, "Modem port found\n"); + break; + case 1: + dev_dbg(dev, "DM/DIAG interface found\n"); + break; + case 5: + dev_dbg(dev, "NMEA GPS interface found\n"); + break; + default: + /* don't claim any unsupported interface */ + altsetting = -1; + break; + } + break; + default: + dev_err(dev, "unsupported device layout type: %lu\n", + id->driver_info); + break; + } + +done: + if (altsetting >= 0) { + retval = usb_set_interface(serial->dev, ifnum, altsetting); + if (retval < 0) { + dev_err(dev, + "Could not set interface, error %d\n", + retval); + retval = -ENODEV; + } + } + + return retval; +} + +static int qc_attach(struct usb_serial *serial) +{ + struct usb_wwan_intf_private *data; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + spin_lock_init(&data->susp_lock); + + usb_set_serial_data(serial, data); + + return 0; +} + +static void qc_release(struct usb_serial *serial) +{ + struct usb_wwan_intf_private *priv = usb_get_serial_data(serial); + + usb_set_serial_data(serial, NULL); + kfree(priv); +} + +static struct usb_serial_driver qcdevice = { + .driver = { + .owner = THIS_MODULE, + .name = "qcserial", + }, + .description = "Qualcomm USB modem", + .id_table = id_table, + .num_ports = 1, + .probe = qcprobe, + .open = usb_wwan_open, + .close = usb_wwan_close, + .write = usb_wwan_write, + .write_room = usb_wwan_write_room, + .chars_in_buffer = usb_wwan_chars_in_buffer, + .attach = qc_attach, + .release = qc_release, + .port_probe = usb_wwan_port_probe, + .port_remove = usb_wwan_port_remove, +#ifdef CONFIG_PM + .suspend = usb_wwan_suspend, + .resume = usb_wwan_resume, +#endif +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &qcdevice, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL v2"); diff --git a/kernel/drivers/usb/serial/quatech2.c b/kernel/drivers/usb/serial/quatech2.c new file mode 100644 index 000000000..504f5bff7 --- /dev/null +++ b/kernel/drivers/usb/serial/quatech2.c @@ -0,0 +1,1036 @@ +/* + * usb-serial driver for Quatech USB 2 devices + * + * Copyright (C) 2012 Bill Pemberton (wfp5p@virginia.edu) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * + * These devices all have only 1 bulk in and 1 bulk out that is shared + * for all serial ports. + * + */ + +#include <asm/unaligned.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/serial.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/serial_reg.h> +#include <linux/uaccess.h> + +/* default urb timeout for usb operations */ +#define QT2_USB_TIMEOUT USB_CTRL_SET_TIMEOUT + +#define QT_OPEN_CLOSE_CHANNEL 0xca +#define QT_SET_GET_DEVICE 0xc2 +#define QT_SET_GET_REGISTER 0xc0 +#define QT_GET_SET_PREBUF_TRIG_LVL 0xcc +#define QT_SET_ATF 0xcd +#define QT_TRANSFER_IN 0xc0 +#define QT_HW_FLOW_CONTROL_MASK 0xc5 +#define QT_SW_FLOW_CONTROL_MASK 0xc6 +#define QT2_BREAK_CONTROL 0xc8 +#define QT2_GET_SET_UART 0xc1 +#define QT2_FLUSH_DEVICE 0xc4 +#define QT2_GET_SET_QMCR 0xe1 +#define QT2_QMCR_RS232 0x40 +#define QT2_QMCR_RS422 0x10 + +#define SERIAL_CRTSCTS ((UART_MCR_RTS << 8) | UART_MSR_CTS) + +#define SERIAL_EVEN_PARITY (UART_LCR_PARITY | UART_LCR_EPAR) + +/* status bytes for the device */ +#define QT2_CONTROL_BYTE 0x1b +#define QT2_LINE_STATUS 0x00 /* following 1 byte is line status */ +#define QT2_MODEM_STATUS 0x01 /* following 1 byte is modem status */ +#define QT2_XMIT_HOLD 0x02 /* following 2 bytes are ?? */ +#define QT2_CHANGE_PORT 0x03 /* following 1 byte is port to change to */ +#define QT2_REC_FLUSH 0x04 /* no following info */ +#define QT2_XMIT_FLUSH 0x05 /* no following info */ +#define QT2_CONTROL_ESCAPE 0xff /* pass through previous 2 control bytes */ + +#define MAX_BAUD_RATE 921600 +#define DEFAULT_BAUD_RATE 9600 + +#define QT2_READ_BUFFER_SIZE 512 /* size of read buffer */ +#define QT2_WRITE_BUFFER_SIZE 512 /* size of write buffer */ +#define QT2_WRITE_CONTROL_SIZE 5 /* control bytes used for a write */ + +#define DRIVER_DESC "Quatech 2nd gen USB to Serial Driver" + +#define USB_VENDOR_ID_QUATECH 0x061d +#define QUATECH_SSU2_100 0xC120 /* RS232 single port */ +#define QUATECH_DSU2_100 0xC140 /* RS232 dual port */ +#define QUATECH_DSU2_400 0xC150 /* RS232/422/485 dual port */ +#define QUATECH_QSU2_100 0xC160 /* RS232 four port */ +#define QUATECH_QSU2_400 0xC170 /* RS232/422/485 four port */ +#define QUATECH_ESU2_100 0xC1A0 /* RS232 eight port */ +#define QUATECH_ESU2_400 0xC180 /* RS232/422/485 eight port */ + +struct qt2_device_detail { + int product_id; + int num_ports; +}; + +#define QT_DETAILS(prod, ports) \ + .product_id = (prod), \ + .num_ports = (ports) + +static const struct qt2_device_detail qt2_device_details[] = { + {QT_DETAILS(QUATECH_SSU2_100, 1)}, + {QT_DETAILS(QUATECH_DSU2_400, 2)}, + {QT_DETAILS(QUATECH_DSU2_100, 2)}, + {QT_DETAILS(QUATECH_QSU2_400, 4)}, + {QT_DETAILS(QUATECH_QSU2_100, 4)}, + {QT_DETAILS(QUATECH_ESU2_400, 8)}, + {QT_DETAILS(QUATECH_ESU2_100, 8)}, + {QT_DETAILS(0, 0)} /* Terminating entry */ +}; + +static const struct usb_device_id id_table[] = { + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU2_100)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_100)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_400)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU2_100)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU2_400)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU2_100)}, + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU2_400)}, + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +struct qt2_serial_private { + unsigned char current_port; /* current port for incoming data */ + + struct urb *read_urb; /* shared among all ports */ + char *read_buffer; +}; + +struct qt2_port_private { + u8 device_port; + + spinlock_t urb_lock; + bool urb_in_use; + struct urb *write_urb; + char *write_buffer; + + spinlock_t lock; + u8 shadowLSR; + u8 shadowMSR; + + struct usb_serial_port *port; +}; + +static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch); +static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch); +static void qt2_write_bulk_callback(struct urb *urb); +static void qt2_read_bulk_callback(struct urb *urb); + +static void qt2_release(struct usb_serial *serial) +{ + struct qt2_serial_private *serial_priv; + + serial_priv = usb_get_serial_data(serial); + + usb_free_urb(serial_priv->read_urb); + kfree(serial_priv->read_buffer); + kfree(serial_priv); +} + +static inline int calc_baud_divisor(int baudrate) +{ + int divisor, rem; + + divisor = MAX_BAUD_RATE / baudrate; + rem = MAX_BAUD_RATE % baudrate; + /* Round to nearest divisor */ + if (((rem * 2) >= baudrate) && (baudrate != 110)) + divisor++; + + return divisor; +} + +static inline int qt2_set_port_config(struct usb_device *dev, + unsigned char port_number, + u16 baudrate, u16 lcr) +{ + int divisor = calc_baud_divisor(baudrate); + u16 index = ((u16) (lcr << 8) | (u16) (port_number)); + + return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + QT2_GET_SET_UART, 0x40, + divisor, index, NULL, 0, QT2_USB_TIMEOUT); +} + +static inline int qt2_control_msg(struct usb_device *dev, + u8 request, u16 data, u16 index) +{ + return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + request, 0x40, data, index, + NULL, 0, QT2_USB_TIMEOUT); +} + +static inline int qt2_setdevice(struct usb_device *dev, u8 *data) +{ + u16 x = ((u16) (data[1] << 8) | (u16) (data[0])); + + return qt2_control_msg(dev, QT_SET_GET_DEVICE, x, 0); +} + + +static inline int qt2_getdevice(struct usb_device *dev, u8 *data) +{ + return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + QT_SET_GET_DEVICE, 0xc0, 0, 0, + data, 3, QT2_USB_TIMEOUT); +} + +static inline int qt2_getregister(struct usb_device *dev, + u8 uart, + u8 reg, + u8 *data) +{ + return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + QT_SET_GET_REGISTER, 0xc0, reg, + uart, data, sizeof(*data), QT2_USB_TIMEOUT); + +} + +static inline int qt2_setregister(struct usb_device *dev, + u8 uart, u8 reg, u16 data) +{ + u16 value = (data << 8) | reg; + + return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + QT_SET_GET_REGISTER, 0x40, value, uart, + NULL, 0, QT2_USB_TIMEOUT); +} + +static inline int update_mctrl(struct qt2_port_private *port_priv, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = port_priv->port; + struct usb_device *dev = port->serial->dev; + unsigned urb_value; + int status; + + if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) { + dev_dbg(&port->dev, + "update_mctrl - DTR|RTS not being set|cleared\n"); + return 0; /* no change */ + } + + clear &= ~set; /* 'set' takes precedence over 'clear' */ + urb_value = 0; + if (set & TIOCM_DTR) + urb_value |= UART_MCR_DTR; + if (set & TIOCM_RTS) + urb_value |= UART_MCR_RTS; + + status = qt2_setregister(dev, port_priv->device_port, UART_MCR, + urb_value); + if (status < 0) + dev_err(&port->dev, + "update_mctrl - Error from MODEM_CTRL urb: %i\n", + status); + return status; +} + +static int qt2_calc_num_ports(struct usb_serial *serial) +{ + struct qt2_device_detail d; + int i; + + for (i = 0; d = qt2_device_details[i], d.product_id != 0; i++) { + if (d.product_id == le16_to_cpu(serial->dev->descriptor.idProduct)) + return d.num_ports; + } + + /* we didn't recognize the device */ + dev_err(&serial->dev->dev, + "don't know the number of ports, assuming 1\n"); + + return 1; +} + +static void qt2_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old_termios) +{ + struct usb_device *dev = port->serial->dev; + struct qt2_port_private *port_priv; + struct ktermios *termios = &tty->termios; + u16 baud; + unsigned int cflag = termios->c_cflag; + u16 new_lcr = 0; + int status; + + port_priv = usb_get_serial_port_data(port); + + if (cflag & PARENB) { + if (cflag & PARODD) + new_lcr |= UART_LCR_PARITY; + else + new_lcr |= SERIAL_EVEN_PARITY; + } + + switch (cflag & CSIZE) { + case CS5: + new_lcr |= UART_LCR_WLEN5; + break; + case CS6: + new_lcr |= UART_LCR_WLEN6; + break; + case CS7: + new_lcr |= UART_LCR_WLEN7; + break; + default: + case CS8: + new_lcr |= UART_LCR_WLEN8; + break; + } + + baud = tty_get_baud_rate(tty); + if (!baud) + baud = 9600; + + status = qt2_set_port_config(dev, port_priv->device_port, baud, + new_lcr); + if (status < 0) + dev_err(&port->dev, "%s - qt2_set_port_config failed: %i\n", + __func__, status); + + if (cflag & CRTSCTS) + status = qt2_control_msg(dev, QT_HW_FLOW_CONTROL_MASK, + SERIAL_CRTSCTS, + port_priv->device_port); + else + status = qt2_control_msg(dev, QT_HW_FLOW_CONTROL_MASK, + 0, port_priv->device_port); + if (status < 0) + dev_err(&port->dev, "%s - set HW flow control failed: %i\n", + __func__, status); + + if (I_IXOFF(tty) || I_IXON(tty)) { + u16 x = ((u16) (START_CHAR(tty) << 8) | (u16) (STOP_CHAR(tty))); + + status = qt2_control_msg(dev, QT_SW_FLOW_CONTROL_MASK, + x, port_priv->device_port); + } else + status = qt2_control_msg(dev, QT_SW_FLOW_CONTROL_MASK, + 0, port_priv->device_port); + + if (status < 0) + dev_err(&port->dev, "%s - set SW flow control failed: %i\n", + __func__, status); + +} + +static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct usb_serial *serial; + struct qt2_port_private *port_priv; + u8 *data; + u16 device_port; + int status; + unsigned long flags; + + device_port = port->port_number; + + serial = port->serial; + + port_priv = usb_get_serial_port_data(port); + + /* set the port to RS232 mode */ + status = qt2_control_msg(serial->dev, QT2_GET_SET_QMCR, + QT2_QMCR_RS232, device_port); + if (status < 0) { + dev_err(&port->dev, + "%s failed to set RS232 mode for port %i error %i\n", + __func__, device_port, status); + return status; + } + + data = kzalloc(2, GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* open the port */ + status = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + QT_OPEN_CLOSE_CHANNEL, + 0xc0, 0, + device_port, data, 2, QT2_USB_TIMEOUT); + + if (status < 0) { + dev_err(&port->dev, "%s - open port failed %i\n", __func__, + status); + kfree(data); + return status; + } + + spin_lock_irqsave(&port_priv->lock, flags); + port_priv->shadowLSR = data[0]; + port_priv->shadowMSR = data[1]; + spin_unlock_irqrestore(&port_priv->lock, flags); + + kfree(data); + + /* set to default speed and 8bit word size */ + status = qt2_set_port_config(serial->dev, device_port, + DEFAULT_BAUD_RATE, UART_LCR_WLEN8); + if (status < 0) { + dev_err(&port->dev, "%s - initial setup failed (%i)\n", + __func__, device_port); + return status; + } + + port_priv->device_port = (u8) device_port; + + if (tty) + qt2_set_termios(tty, port, &tty->termios); + + return 0; + +} + +static void qt2_close(struct usb_serial_port *port) +{ + struct usb_serial *serial; + struct qt2_port_private *port_priv; + unsigned long flags; + int i; + + serial = port->serial; + port_priv = usb_get_serial_port_data(port); + + spin_lock_irqsave(&port_priv->urb_lock, flags); + usb_kill_urb(port_priv->write_urb); + port_priv->urb_in_use = false; + spin_unlock_irqrestore(&port_priv->urb_lock, flags); + + /* flush the port transmit buffer */ + i = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + QT2_FLUSH_DEVICE, 0x40, 1, + port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT); + + if (i < 0) + dev_err(&port->dev, "%s - transmit buffer flush failed: %i\n", + __func__, i); + + /* flush the port receive buffer */ + i = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + QT2_FLUSH_DEVICE, 0x40, 0, + port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT); + + if (i < 0) + dev_err(&port->dev, "%s - receive buffer flush failed: %i\n", + __func__, i); + + /* close the port */ + i = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), + QT_OPEN_CLOSE_CHANNEL, + 0x40, 0, + port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT); + + if (i < 0) + dev_err(&port->dev, "%s - close port failed %i\n", + __func__, i); +} + +static void qt2_disconnect(struct usb_serial *serial) +{ + struct qt2_serial_private *serial_priv = usb_get_serial_data(serial); + + usb_kill_urb(serial_priv->read_urb); +} + +static int get_serial_info(struct usb_serial_port *port, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp; + + if (!retinfo) + return -EFAULT; + + memset(&tmp, 0, sizeof(tmp)); + tmp.line = port->minor; + tmp.port = 0; + tmp.irq = 0; + tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; + tmp.xmit_fifo_size = port->bulk_out_size; + tmp.baud_base = 9600; + tmp.close_delay = 5*HZ; + tmp.closing_wait = 30*HZ; + + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int qt2_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + + switch (cmd) { + case TIOCGSERIAL: + return get_serial_info(port, + (struct serial_struct __user *)arg); + default: + break; + } + + return -ENOIOCTLCMD; +} + +static void qt2_process_status(struct usb_serial_port *port, unsigned char *ch) +{ + switch (*ch) { + case QT2_LINE_STATUS: + qt2_update_lsr(port, ch + 1); + break; + case QT2_MODEM_STATUS: + qt2_update_msr(port, ch + 1); + break; + } +} + +/* not needed, kept to document functionality */ +static void qt2_process_xmit_empty(struct usb_serial_port *port, + unsigned char *ch) +{ + int bytes_written; + + bytes_written = (int)(*ch) + (int)(*(ch + 1) << 4); +} + +/* not needed, kept to document functionality */ +static void qt2_process_flush(struct usb_serial_port *port, unsigned char *ch) +{ + return; +} + +static void qt2_process_read_urb(struct urb *urb) +{ + struct usb_serial *serial; + struct qt2_serial_private *serial_priv; + struct usb_serial_port *port; + struct qt2_port_private *port_priv; + bool escapeflag; + unsigned char *ch; + int i; + unsigned char newport; + int len = urb->actual_length; + + if (!len) + return; + + ch = urb->transfer_buffer; + serial = urb->context; + serial_priv = usb_get_serial_data(serial); + port = serial->port[serial_priv->current_port]; + port_priv = usb_get_serial_port_data(port); + + for (i = 0; i < urb->actual_length; i++) { + ch = (unsigned char *)urb->transfer_buffer + i; + if ((i <= (len - 3)) && + (*ch == QT2_CONTROL_BYTE) && + (*(ch + 1) == QT2_CONTROL_BYTE)) { + escapeflag = false; + switch (*(ch + 2)) { + case QT2_LINE_STATUS: + case QT2_MODEM_STATUS: + if (i > (len - 4)) { + dev_warn(&port->dev, + "%s - status message too short\n", + __func__); + break; + } + qt2_process_status(port, ch + 2); + i += 3; + escapeflag = true; + break; + case QT2_XMIT_HOLD: + if (i > (len - 5)) { + dev_warn(&port->dev, + "%s - xmit_empty message too short\n", + __func__); + break; + } + qt2_process_xmit_empty(port, ch + 3); + i += 4; + escapeflag = true; + break; + case QT2_CHANGE_PORT: + if (i > (len - 4)) { + dev_warn(&port->dev, + "%s - change_port message too short\n", + __func__); + break; + } + tty_flip_buffer_push(&port->port); + + newport = *(ch + 3); + + if (newport > serial->num_ports) { + dev_err(&port->dev, + "%s - port change to invalid port: %i\n", + __func__, newport); + break; + } + + serial_priv->current_port = newport; + port = serial->port[serial_priv->current_port]; + port_priv = usb_get_serial_port_data(port); + i += 3; + escapeflag = true; + break; + case QT2_REC_FLUSH: + case QT2_XMIT_FLUSH: + qt2_process_flush(port, ch + 2); + i += 2; + escapeflag = true; + break; + case QT2_CONTROL_ESCAPE: + tty_buffer_request_room(&port->port, 2); + tty_insert_flip_string(&port->port, ch, 2); + i += 2; + escapeflag = true; + break; + default: + dev_warn(&port->dev, + "%s - unsupported command %i\n", + __func__, *(ch + 2)); + break; + } + if (escapeflag) + continue; + } + + tty_buffer_request_room(&port->port, 1); + tty_insert_flip_string(&port->port, ch, 1); + } + + tty_flip_buffer_push(&port->port); +} + +static void qt2_write_bulk_callback(struct urb *urb) +{ + struct usb_serial_port *port; + struct qt2_port_private *port_priv; + + port = urb->context; + port_priv = usb_get_serial_port_data(port); + + spin_lock(&port_priv->urb_lock); + + port_priv->urb_in_use = false; + usb_serial_port_softint(port); + + spin_unlock(&port_priv->urb_lock); + +} + +static void qt2_read_bulk_callback(struct urb *urb) +{ + struct usb_serial *serial = urb->context; + int status; + + if (urb->status) { + dev_warn(&serial->dev->dev, + "%s - non-zero urb status: %i\n", __func__, + urb->status); + return; + } + + qt2_process_read_urb(urb); + + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status != 0) + dev_err(&serial->dev->dev, + "%s - resubmit read urb failed: %i\n", + __func__, status); +} + +static int qt2_setup_urbs(struct usb_serial *serial) +{ + struct usb_serial_port *port0; + struct qt2_serial_private *serial_priv; + int status; + + port0 = serial->port[0]; + + serial_priv = usb_get_serial_data(serial); + serial_priv->read_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!serial_priv->read_urb) + return -ENOMEM; + + usb_fill_bulk_urb(serial_priv->read_urb, serial->dev, + usb_rcvbulkpipe(serial->dev, + port0->bulk_in_endpointAddress), + serial_priv->read_buffer, + QT2_READ_BUFFER_SIZE, + qt2_read_bulk_callback, serial); + + status = usb_submit_urb(serial_priv->read_urb, GFP_KERNEL); + if (status != 0) { + dev_err(&serial->dev->dev, + "%s - submit read urb failed %i\n", __func__, status); + usb_free_urb(serial_priv->read_urb); + return status; + } + + return 0; +} + +static int qt2_attach(struct usb_serial *serial) +{ + struct qt2_serial_private *serial_priv; + int status; + + /* power on unit */ + status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + 0xc2, 0x40, 0x8000, 0, NULL, 0, + QT2_USB_TIMEOUT); + if (status < 0) { + dev_err(&serial->dev->dev, + "%s - failed to power on unit: %i\n", __func__, status); + return status; + } + + serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL); + if (!serial_priv) + return -ENOMEM; + + serial_priv->read_buffer = kmalloc(QT2_READ_BUFFER_SIZE, GFP_KERNEL); + if (!serial_priv->read_buffer) { + status = -ENOMEM; + goto err_buf; + } + + usb_set_serial_data(serial, serial_priv); + + status = qt2_setup_urbs(serial); + if (status != 0) + goto attach_failed; + + return 0; + +attach_failed: + kfree(serial_priv->read_buffer); +err_buf: + kfree(serial_priv); + return status; +} + +static int qt2_port_probe(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct qt2_port_private *port_priv; + u8 bEndpointAddress; + + port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL); + if (!port_priv) + return -ENOMEM; + + spin_lock_init(&port_priv->lock); + spin_lock_init(&port_priv->urb_lock); + port_priv->port = port; + + port_priv->write_buffer = kmalloc(QT2_WRITE_BUFFER_SIZE, GFP_KERNEL); + if (!port_priv->write_buffer) + goto err_buf; + + port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!port_priv->write_urb) + goto err_urb; + + bEndpointAddress = serial->port[0]->bulk_out_endpointAddress; + usb_fill_bulk_urb(port_priv->write_urb, serial->dev, + usb_sndbulkpipe(serial->dev, bEndpointAddress), + port_priv->write_buffer, + QT2_WRITE_BUFFER_SIZE, + qt2_write_bulk_callback, port); + + usb_set_serial_port_data(port, port_priv); + + return 0; +err_urb: + kfree(port_priv->write_buffer); +err_buf: + kfree(port_priv); + return -ENOMEM; +} + +static int qt2_port_remove(struct usb_serial_port *port) +{ + struct qt2_port_private *port_priv; + + port_priv = usb_get_serial_port_data(port); + usb_free_urb(port_priv->write_urb); + kfree(port_priv->write_buffer); + kfree(port_priv); + + return 0; +} + +static int qt2_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_device *dev = port->serial->dev; + struct qt2_port_private *port_priv = usb_get_serial_port_data(port); + u8 *d; + int r; + + d = kzalloc(2, GFP_KERNEL); + if (!d) + return -ENOMEM; + + r = qt2_getregister(dev, port_priv->device_port, UART_MCR, d); + if (r < 0) + goto mget_out; + + r = qt2_getregister(dev, port_priv->device_port, UART_MSR, d + 1); + if (r < 0) + goto mget_out; + + r = (d[0] & UART_MCR_DTR ? TIOCM_DTR : 0) | + (d[0] & UART_MCR_RTS ? TIOCM_RTS : 0) | + (d[1] & UART_MSR_CTS ? TIOCM_CTS : 0) | + (d[1] & UART_MSR_DCD ? TIOCM_CAR : 0) | + (d[1] & UART_MSR_RI ? TIOCM_RI : 0) | + (d[1] & UART_MSR_DSR ? TIOCM_DSR : 0); + +mget_out: + kfree(d); + return r; +} + +static int qt2_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct qt2_port_private *port_priv; + + port_priv = usb_get_serial_port_data(tty->driver_data); + return update_mctrl(port_priv, set, clear); +} + +static void qt2_break_ctl(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + struct qt2_port_private *port_priv; + int status; + u16 val; + + port_priv = usb_get_serial_port_data(port); + + val = (break_state == -1) ? 1 : 0; + + status = qt2_control_msg(port->serial->dev, QT2_BREAK_CONTROL, + val, port_priv->device_port); + if (status < 0) + dev_warn(&port->dev, + "%s - failed to send control message: %i\n", __func__, + status); +} + + + +static void qt2_dtr_rts(struct usb_serial_port *port, int on) +{ + struct usb_device *dev = port->serial->dev; + struct qt2_port_private *port_priv = usb_get_serial_port_data(port); + + /* Disable flow control */ + if (!on) { + if (qt2_setregister(dev, port_priv->device_port, + UART_MCR, 0) < 0) + dev_warn(&port->dev, "error from flowcontrol urb\n"); + } + /* drop RTS and DTR */ + if (on) + update_mctrl(port_priv, TIOCM_DTR | TIOCM_RTS, 0); + else + update_mctrl(port_priv, 0, TIOCM_DTR | TIOCM_RTS); +} + +static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch) +{ + struct qt2_port_private *port_priv; + u8 newMSR = (u8) *ch; + unsigned long flags; + + port_priv = usb_get_serial_port_data(port); + + spin_lock_irqsave(&port_priv->lock, flags); + port_priv->shadowMSR = newMSR; + spin_unlock_irqrestore(&port_priv->lock, flags); + + if (newMSR & UART_MSR_ANY_DELTA) { + /* update input line counters */ + if (newMSR & UART_MSR_DCTS) + port->icount.cts++; + if (newMSR & UART_MSR_DDSR) + port->icount.dsr++; + if (newMSR & UART_MSR_DDCD) + port->icount.dcd++; + if (newMSR & UART_MSR_TERI) + port->icount.rng++; + + wake_up_interruptible(&port->port.delta_msr_wait); + } +} + +static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch) +{ + struct qt2_port_private *port_priv; + struct async_icount *icount; + unsigned long flags; + u8 newLSR = (u8) *ch; + + port_priv = usb_get_serial_port_data(port); + + if (newLSR & UART_LSR_BI) + newLSR &= (u8) (UART_LSR_OE | UART_LSR_BI); + + spin_lock_irqsave(&port_priv->lock, flags); + port_priv->shadowLSR = newLSR; + spin_unlock_irqrestore(&port_priv->lock, flags); + + icount = &port->icount; + + if (newLSR & UART_LSR_BRK_ERROR_BITS) { + + if (newLSR & UART_LSR_BI) + icount->brk++; + + if (newLSR & UART_LSR_OE) + icount->overrun++; + + if (newLSR & UART_LSR_PE) + icount->parity++; + + if (newLSR & UART_LSR_FE) + icount->frame++; + } + +} + +static int qt2_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct qt2_port_private *port_priv; + unsigned long flags = 0; + int r; + + port_priv = usb_get_serial_port_data(port); + + spin_lock_irqsave(&port_priv->urb_lock, flags); + + if (port_priv->urb_in_use) + r = 0; + else + r = QT2_WRITE_BUFFER_SIZE - QT2_WRITE_CONTROL_SIZE; + + spin_unlock_irqrestore(&port_priv->urb_lock, flags); + + return r; +} + +static int qt2_write(struct tty_struct *tty, + struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + struct qt2_port_private *port_priv; + struct urb *write_urb; + unsigned char *data; + unsigned long flags; + int status; + int bytes_out = 0; + + port_priv = usb_get_serial_port_data(port); + + if (port_priv->write_urb == NULL) { + dev_err(&port->dev, "%s - no output urb\n", __func__); + return 0; + } + write_urb = port_priv->write_urb; + + count = min(count, QT2_WRITE_BUFFER_SIZE - QT2_WRITE_CONTROL_SIZE); + + data = write_urb->transfer_buffer; + spin_lock_irqsave(&port_priv->urb_lock, flags); + if (port_priv->urb_in_use == true) { + dev_err(&port->dev, "qt2_write - urb is in use\n"); + goto write_out; + } + + *data++ = QT2_CONTROL_BYTE; + *data++ = QT2_CONTROL_BYTE; + *data++ = port_priv->device_port; + put_unaligned_le16(count, data); + data += 2; + memcpy(data, buf, count); + + write_urb->transfer_buffer_length = count + QT2_WRITE_CONTROL_SIZE; + + status = usb_submit_urb(write_urb, GFP_ATOMIC); + if (status == 0) { + port_priv->urb_in_use = true; + bytes_out += count; + } + +write_out: + spin_unlock_irqrestore(&port_priv->urb_lock, flags); + return bytes_out; +} + + +static struct usb_serial_driver qt2_device = { + .driver = { + .owner = THIS_MODULE, + .name = "quatech-serial", + }, + .description = DRIVER_DESC, + .id_table = id_table, + .open = qt2_open, + .close = qt2_close, + .write = qt2_write, + .write_room = qt2_write_room, + .calc_num_ports = qt2_calc_num_ports, + .attach = qt2_attach, + .release = qt2_release, + .disconnect = qt2_disconnect, + .port_probe = qt2_port_probe, + .port_remove = qt2_port_remove, + .dtr_rts = qt2_dtr_rts, + .break_ctl = qt2_break_ctl, + .tiocmget = qt2_tiocmget, + .tiocmset = qt2_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, + .ioctl = qt2_ioctl, + .set_termios = qt2_set_termios, +}; + +static struct usb_serial_driver *const serial_drivers[] = { + &qt2_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/safe_serial.c b/kernel/drivers/usb/serial/safe_serial.c new file mode 100644 index 000000000..b2dff0f14 --- /dev/null +++ b/kernel/drivers/usb/serial/safe_serial.c @@ -0,0 +1,305 @@ +/* + * Safe Encapsulated USB Serial Driver + * + * Copyright (C) 2010 Johan Hovold <jhovold@gmail.com> + * Copyright (C) 2001 Lineo + * Copyright (C) 2001 Hewlett-Packard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * By: + * Stuart Lynne <sl@lineo.com>, Tom Rushworth <tbr@lineo.com> + */ + +/* + * The encapsultaion is designed to overcome difficulties with some USB + * hardware. + * + * While the USB protocol has a CRC over the data while in transit, i.e. while + * being carried over the bus, there is no end to end protection. If the + * hardware has any problems getting the data into or out of the USB transmit + * and receive FIFO's then data can be lost. + * + * This protocol adds a two byte trailer to each USB packet to specify the + * number of bytes of valid data and a 10 bit CRC that will allow the receiver + * to verify that the entire USB packet was received without error. + * + * Because in this case the sender and receiver are the class and function + * drivers there is now end to end protection. + * + * There is an additional option that can be used to force all transmitted + * packets to be padded to the maximum packet size. This provides a work + * around for some devices which have problems with small USB packets. + * + * Assuming a packetsize of N: + * + * 0..N-2 data and optional padding + * + * N-2 bits 7-2 - number of bytes of valid data + * bits 1-0 top two bits of 10 bit CRC + * N-1 bottom 8 bits of 10 bit CRC + * + * + * | Data Length | 10 bit CRC | + * + 7 . 6 . 5 . 4 . 3 . 2 . 1 . 0 | 7 . 6 . 5 . 4 . 3 . 2 . 1 . 0 + + * + * The 10 bit CRC is computed across the sent data, followed by the trailer + * with the length set and the CRC set to zero. The CRC is then OR'd into + * the trailer. + * + * When received a 10 bit CRC is computed over the entire frame including + * the trailer and should be equal to zero. + * + * Two module parameters are used to control the encapsulation, if both are + * turned of the module works as a simple serial device with NO + * encapsulation. + * + * See linux/drivers/usbd/serial_fd for a device function driver + * implementation of this. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/gfp.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + + +#ifndef CONFIG_USB_SERIAL_SAFE_PADDED +#define CONFIG_USB_SERIAL_SAFE_PADDED 0 +#endif + +static bool safe = 1; +static bool padded = CONFIG_USB_SERIAL_SAFE_PADDED; + +#define DRIVER_AUTHOR "sl@lineo.com, tbr@lineo.com, Johan Hovold <jhovold@gmail.com>" +#define DRIVER_DESC "USB Safe Encapsulated Serial" + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +module_param(safe, bool, 0); +MODULE_PARM_DESC(safe, "Turn Safe Encapsulation On/Off"); + +module_param(padded, bool, 0); +MODULE_PARM_DESC(padded, "Pad to full wMaxPacketSize On/Off"); + +#define CDC_DEVICE_CLASS 0x02 + +#define CDC_INTERFACE_CLASS 0x02 +#define CDC_INTERFACE_SUBCLASS 0x06 + +#define LINEO_INTERFACE_CLASS 0xff + +#define LINEO_INTERFACE_SUBCLASS_SAFENET 0x01 +#define LINEO_SAFENET_CRC 0x01 +#define LINEO_SAFENET_CRC_PADDED 0x02 + +#define LINEO_INTERFACE_SUBCLASS_SAFESERIAL 0x02 +#define LINEO_SAFESERIAL_CRC 0x01 +#define LINEO_SAFESERIAL_CRC_PADDED 0x02 + + +#define MY_USB_DEVICE(vend, prod, dc, ic, isc) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + USB_DEVICE_ID_MATCH_DEV_CLASS | \ + USB_DEVICE_ID_MATCH_INT_CLASS | \ + USB_DEVICE_ID_MATCH_INT_SUBCLASS, \ + .idVendor = (vend), \ + .idProduct = (prod),\ + .bDeviceClass = (dc),\ + .bInterfaceClass = (ic), \ + .bInterfaceSubClass = (isc), + +static const struct usb_device_id id_table[] = { + {MY_USB_DEVICE(0x49f, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Itsy */ + {MY_USB_DEVICE(0x3f0, 0x2101, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Calypso */ + {MY_USB_DEVICE(0x4dd, 0x8001, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Iris */ + {MY_USB_DEVICE(0x4dd, 0x8002, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Collie */ + {MY_USB_DEVICE(0x4dd, 0x8003, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Collie */ + {MY_USB_DEVICE(0x4dd, 0x8004, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Collie */ + {MY_USB_DEVICE(0x5f9, 0xffff, CDC_DEVICE_CLASS, LINEO_INTERFACE_CLASS, LINEO_INTERFACE_SUBCLASS_SAFESERIAL)}, /* Sharp tmp */ + {} /* terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table); + +static const __u16 crc10_table[256] = { + 0x000, 0x233, 0x255, 0x066, 0x299, 0x0aa, 0x0cc, 0x2ff, + 0x301, 0x132, 0x154, 0x367, 0x198, 0x3ab, 0x3cd, 0x1fe, + 0x031, 0x202, 0x264, 0x057, 0x2a8, 0x09b, 0x0fd, 0x2ce, + 0x330, 0x103, 0x165, 0x356, 0x1a9, 0x39a, 0x3fc, 0x1cf, + 0x062, 0x251, 0x237, 0x004, 0x2fb, 0x0c8, 0x0ae, 0x29d, + 0x363, 0x150, 0x136, 0x305, 0x1fa, 0x3c9, 0x3af, 0x19c, + 0x053, 0x260, 0x206, 0x035, 0x2ca, 0x0f9, 0x09f, 0x2ac, + 0x352, 0x161, 0x107, 0x334, 0x1cb, 0x3f8, 0x39e, 0x1ad, + 0x0c4, 0x2f7, 0x291, 0x0a2, 0x25d, 0x06e, 0x008, 0x23b, + 0x3c5, 0x1f6, 0x190, 0x3a3, 0x15c, 0x36f, 0x309, 0x13a, + 0x0f5, 0x2c6, 0x2a0, 0x093, 0x26c, 0x05f, 0x039, 0x20a, + 0x3f4, 0x1c7, 0x1a1, 0x392, 0x16d, 0x35e, 0x338, 0x10b, + 0x0a6, 0x295, 0x2f3, 0x0c0, 0x23f, 0x00c, 0x06a, 0x259, + 0x3a7, 0x194, 0x1f2, 0x3c1, 0x13e, 0x30d, 0x36b, 0x158, + 0x097, 0x2a4, 0x2c2, 0x0f1, 0x20e, 0x03d, 0x05b, 0x268, + 0x396, 0x1a5, 0x1c3, 0x3f0, 0x10f, 0x33c, 0x35a, 0x169, + 0x188, 0x3bb, 0x3dd, 0x1ee, 0x311, 0x122, 0x144, 0x377, + 0x289, 0x0ba, 0x0dc, 0x2ef, 0x010, 0x223, 0x245, 0x076, + 0x1b9, 0x38a, 0x3ec, 0x1df, 0x320, 0x113, 0x175, 0x346, + 0x2b8, 0x08b, 0x0ed, 0x2de, 0x021, 0x212, 0x274, 0x047, + 0x1ea, 0x3d9, 0x3bf, 0x18c, 0x373, 0x140, 0x126, 0x315, + 0x2eb, 0x0d8, 0x0be, 0x28d, 0x072, 0x241, 0x227, 0x014, + 0x1db, 0x3e8, 0x38e, 0x1bd, 0x342, 0x171, 0x117, 0x324, + 0x2da, 0x0e9, 0x08f, 0x2bc, 0x043, 0x270, 0x216, 0x025, + 0x14c, 0x37f, 0x319, 0x12a, 0x3d5, 0x1e6, 0x180, 0x3b3, + 0x24d, 0x07e, 0x018, 0x22b, 0x0d4, 0x2e7, 0x281, 0x0b2, + 0x17d, 0x34e, 0x328, 0x11b, 0x3e4, 0x1d7, 0x1b1, 0x382, + 0x27c, 0x04f, 0x029, 0x21a, 0x0e5, 0x2d6, 0x2b0, 0x083, + 0x12e, 0x31d, 0x37b, 0x148, 0x3b7, 0x184, 0x1e2, 0x3d1, + 0x22f, 0x01c, 0x07a, 0x249, 0x0b6, 0x285, 0x2e3, 0x0d0, + 0x11f, 0x32c, 0x34a, 0x179, 0x386, 0x1b5, 0x1d3, 0x3e0, + 0x21e, 0x02d, 0x04b, 0x278, 0x087, 0x2b4, 0x2d2, 0x0e1, +}; + +#define CRC10_INITFCS 0x000 /* Initial FCS value */ +#define CRC10_GOODFCS 0x000 /* Good final FCS value */ +#define CRC10_FCS(fcs, c) ((((fcs) << 8) & 0x3ff) ^ crc10_table[((fcs) >> 2) & 0xff] ^ (c)) + +/** + * fcs_compute10 - memcpy and calculate 10 bit CRC across buffer + * @sp: pointer to buffer + * @len: number of bytes + * @fcs: starting FCS + * + * Perform a memcpy and calculate fcs using ppp 10bit CRC algorithm. Return + * new 10 bit FCS. + */ +static __u16 __inline__ fcs_compute10(unsigned char *sp, int len, __u16 fcs) +{ + for (; len-- > 0; fcs = CRC10_FCS(fcs, *sp++)); + return fcs; +} + +static void safe_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + unsigned char *data = urb->transfer_buffer; + unsigned char length = urb->actual_length; + int actual_length; + __u16 fcs; + + if (!length) + return; + + if (!safe) + goto out; + + fcs = fcs_compute10(data, length, CRC10_INITFCS); + if (fcs) { + dev_err(&port->dev, "%s - bad CRC %x\n", __func__, fcs); + return; + } + + actual_length = data[length - 2] >> 2; + if (actual_length > (length - 2)) { + dev_err(&port->dev, "%s - inconsistent lengths %d:%d\n", + __func__, actual_length, length); + return; + } + dev_info(&urb->dev->dev, "%s - actual: %d\n", __func__, actual_length); + length = actual_length; +out: + tty_insert_flip_string(&port->port, data, length); + tty_flip_buffer_push(&port->port); +} + +static int safe_prepare_write_buffer(struct usb_serial_port *port, + void *dest, size_t size) +{ + unsigned char *buf = dest; + int count; + int trailer_len; + int pkt_len; + __u16 fcs; + + trailer_len = safe ? 2 : 0; + + count = kfifo_out_locked(&port->write_fifo, buf, size - trailer_len, + &port->lock); + if (!safe) + return count; + + /* pad if necessary */ + if (padded) { + pkt_len = size; + memset(buf + count, '0', pkt_len - count - trailer_len); + } else { + pkt_len = count + trailer_len; + } + + /* set count */ + buf[pkt_len - 2] = count << 2; + buf[pkt_len - 1] = 0; + + /* compute fcs and insert into trailer */ + fcs = fcs_compute10(buf, pkt_len, CRC10_INITFCS); + buf[pkt_len - 2] |= fcs >> 8; + buf[pkt_len - 1] |= fcs & 0xff; + + return pkt_len; +} + +static int safe_startup(struct usb_serial *serial) +{ + struct usb_interface_descriptor *desc; + + if (serial->dev->descriptor.bDeviceClass != CDC_DEVICE_CLASS) + return -ENODEV; + + desc = &serial->interface->cur_altsetting->desc; + + if (desc->bInterfaceClass != LINEO_INTERFACE_CLASS) + return -ENODEV; + if (desc->bInterfaceSubClass != LINEO_INTERFACE_SUBCLASS_SAFESERIAL) + return -ENODEV; + + switch (desc->bInterfaceProtocol) { + case LINEO_SAFESERIAL_CRC: + break; + case LINEO_SAFESERIAL_CRC_PADDED: + padded = 1; + break; + default: + return -EINVAL; + } + return 0; +} + +static struct usb_serial_driver safe_device = { + .driver = { + .owner = THIS_MODULE, + .name = "safe_serial", + }, + .id_table = id_table, + .num_ports = 1, + .process_read_urb = safe_process_read_urb, + .prepare_write_buffer = safe_prepare_write_buffer, + .attach = safe_startup, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &safe_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); diff --git a/kernel/drivers/usb/serial/sierra.c b/kernel/drivers/usb/serial/sierra.c new file mode 100644 index 000000000..46179a082 --- /dev/null +++ b/kernel/drivers/usb/serial/sierra.c @@ -0,0 +1,1100 @@ +/* + USB Driver for Sierra Wireless + + Copyright (C) 2006, 2007, 2008 Kevin Lloyd <klloyd@sierrawireless.com>, + + Copyright (C) 2008, 2009 Elina Pasheva, Matthew Safar, Rory Filer + <linux@sierrawireless.com> + + IMPORTANT DISCLAIMER: This driver is not commercially supported by + Sierra Wireless. Use at your own risk. + + This driver is free software; you can redistribute it and/or modify + it under the terms of Version 2 of the GNU General Public License as + published by the Free Software Foundation. + + Portions based on the option driver by Matthias Urlichs <smurf@smurf.noris.de> + Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org> +*/ +/* Uncomment to log function calls */ +/* #define DEBUG */ + +#define DRIVER_AUTHOR "Kevin Lloyd, Elina Pasheva, Matthew Safar, Rory Filer" +#define DRIVER_DESC "USB Driver for Sierra Wireless USB modems" + +#include <linux/kernel.h> +#include <linux/jiffies.h> +#include <linux/errno.h> +#include <linux/tty.h> +#include <linux/slab.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +#define SWIMS_USB_REQUEST_SetPower 0x00 +#define SWIMS_USB_REQUEST_SetNmea 0x07 + +#define N_IN_URB_HM 8 +#define N_OUT_URB_HM 64 +#define N_IN_URB 4 +#define N_OUT_URB 4 +#define IN_BUFLEN 4096 + +#define MAX_TRANSFER (PAGE_SIZE - 512) +/* MAX_TRANSFER is chosen so that the VM is not stressed by + allocations > PAGE_SIZE and the number of packets in a page + is an integer 512 is the largest possible packet on EHCI */ + +static bool nmea; + +/* Used in interface blacklisting */ +struct sierra_iface_info { + const u32 infolen; /* number of interface numbers on blacklist */ + const u8 *ifaceinfo; /* pointer to the array holding the numbers */ +}; + +struct sierra_intf_private { + spinlock_t susp_lock; + unsigned int suspended:1; + int in_flight; + unsigned int open_ports; +}; + +static int sierra_set_power_state(struct usb_device *udev, __u16 swiState) +{ + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + SWIMS_USB_REQUEST_SetPower, /* __u8 request */ + USB_TYPE_VENDOR, /* __u8 request type */ + swiState, /* __u16 value */ + 0, /* __u16 index */ + NULL, /* void *data */ + 0, /* __u16 size */ + USB_CTRL_SET_TIMEOUT); /* int timeout */ +} + +static int sierra_vsc_set_nmea(struct usb_device *udev, __u16 enable) +{ + return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + SWIMS_USB_REQUEST_SetNmea, /* __u8 request */ + USB_TYPE_VENDOR, /* __u8 request type */ + enable, /* __u16 value */ + 0x0000, /* __u16 index */ + NULL, /* void *data */ + 0, /* __u16 size */ + USB_CTRL_SET_TIMEOUT); /* int timeout */ +} + +static int sierra_calc_num_ports(struct usb_serial *serial) +{ + int num_ports = 0; + u8 ifnum, numendpoints; + + ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber; + numendpoints = serial->interface->cur_altsetting->desc.bNumEndpoints; + + /* Dummy interface present on some SKUs should be ignored */ + if (ifnum == 0x99) + num_ports = 0; + else if (numendpoints <= 3) + num_ports = 1; + else + num_ports = (numendpoints-1)/2; + return num_ports; +} + +static int is_blacklisted(const u8 ifnum, + const struct sierra_iface_info *blacklist) +{ + const u8 *info; + int i; + + if (blacklist) { + info = blacklist->ifaceinfo; + + for (i = 0; i < blacklist->infolen; i++) { + if (info[i] == ifnum) + return 1; + } + } + return 0; +} + +static int is_himemory(const u8 ifnum, + const struct sierra_iface_info *himemorylist) +{ + const u8 *info; + int i; + + if (himemorylist) { + info = himemorylist->ifaceinfo; + + for (i=0; i < himemorylist->infolen; i++) { + if (info[i] == ifnum) + return 1; + } + } + return 0; +} + +static int sierra_calc_interface(struct usb_serial *serial) +{ + int interface; + struct usb_interface *p_interface; + struct usb_host_interface *p_host_interface; + + /* Get the interface structure pointer from the serial struct */ + p_interface = serial->interface; + + /* Get a pointer to the host interface structure */ + p_host_interface = p_interface->cur_altsetting; + + /* read the interface descriptor for this active altsetting + * to find out the interface number we are on + */ + interface = p_host_interface->desc.bInterfaceNumber; + + return interface; +} + +static int sierra_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + int result = 0; + struct usb_device *udev; + u8 ifnum; + + udev = serial->dev; + ifnum = sierra_calc_interface(serial); + + /* + * If this interface supports more than 1 alternate + * select the 2nd one + */ + if (serial->interface->num_altsetting == 2) { + dev_dbg(&udev->dev, "Selecting alt setting for interface %d\n", + ifnum); + /* We know the alternate setting is 1 for the MC8785 */ + usb_set_interface(udev, ifnum, 1); + } + + /* ifnum could have changed - by calling usb_set_interface */ + ifnum = sierra_calc_interface(serial); + + if (is_blacklisted(ifnum, + (struct sierra_iface_info *)id->driver_info)) { + dev_dbg(&serial->dev->dev, + "Ignoring blacklisted interface #%d\n", ifnum); + return -ENODEV; + } + + return result; +} + +/* interfaces with higher memory requirements */ +static const u8 hi_memory_typeA_ifaces[] = { 0, 2 }; +static const struct sierra_iface_info typeA_interface_list = { + .infolen = ARRAY_SIZE(hi_memory_typeA_ifaces), + .ifaceinfo = hi_memory_typeA_ifaces, +}; + +static const u8 hi_memory_typeB_ifaces[] = { 3, 4, 5, 6 }; +static const struct sierra_iface_info typeB_interface_list = { + .infolen = ARRAY_SIZE(hi_memory_typeB_ifaces), + .ifaceinfo = hi_memory_typeB_ifaces, +}; + +/* 'blacklist' of interfaces not served by this driver */ +static const u8 direct_ip_non_serial_ifaces[] = { 7, 8, 9, 10, 11, 19, 20 }; +static const struct sierra_iface_info direct_ip_interface_blacklist = { + .infolen = ARRAY_SIZE(direct_ip_non_serial_ifaces), + .ifaceinfo = direct_ip_non_serial_ifaces, +}; + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */ + { USB_DEVICE(0x03F0, 0x1B1D) }, /* HP ev2200 a.k.a MC5720 */ + { USB_DEVICE(0x03F0, 0x211D) }, /* HP ev2210 a.k.a MC5725 */ + { USB_DEVICE(0x03F0, 0x1E1D) }, /* HP hs2300 a.k.a MC8775 */ + + { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ + { USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */ + { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ + { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ + { USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */ + { USB_DEVICE(0x1199, 0x0022) }, /* Sierra Wireless EM5725 */ + { USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */ + { USB_DEVICE(0x1199, 0x0224) }, /* Sierra Wireless MC5727 */ + { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */ + { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */ + { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */ + { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */ + { USB_DEVICE(0x1199, 0x0301) }, /* Sierra Wireless USB Dongle 250U */ + /* Sierra Wireless C597 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) }, + /* Sierra Wireless T598 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) }, + { USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless T11 */ + { USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless AC402 */ + { USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless MC5728 */ + { USB_DEVICE(0x1199, 0x0029) }, /* Sierra Wireless Device */ + + { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */ + { USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */ + { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */ + { USB_DEVICE(0x1199, 0x6805) }, /* Sierra Wireless MC8765 */ + { USB_DEVICE(0x1199, 0x6808) }, /* Sierra Wireless MC8755 */ + { USB_DEVICE(0x1199, 0x6809) }, /* Sierra Wireless MC8765 */ + { USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 & AC 875U */ + { USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 */ + { USB_DEVICE(0x1199, 0x6815) }, /* Sierra Wireless MC8775 */ + { USB_DEVICE(0x1199, 0x6816) }, /* Sierra Wireless MC8775 */ + { USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */ + { USB_DEVICE(0x1199, 0x6821) }, /* Sierra Wireless AirCard 875U */ + { USB_DEVICE(0x1199, 0x6822) }, /* Sierra Wireless AirCard 875E */ + { USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780 */ + { USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */ + { USB_DEVICE(0x1199, 0x6834) }, /* Sierra Wireless MC8780 */ + { USB_DEVICE(0x1199, 0x6835) }, /* Sierra Wireless MC8781 */ + { USB_DEVICE(0x1199, 0x6838) }, /* Sierra Wireless MC8780 */ + { USB_DEVICE(0x1199, 0x6839) }, /* Sierra Wireless MC8781 */ + { USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */ + { USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */ + /* Sierra Wireless MC8790, MC8791, MC8792 Composite */ + { USB_DEVICE(0x1199, 0x683C) }, + { USB_DEVICE(0x1199, 0x683D) }, /* Sierra Wireless MC8791 Composite */ + /* Sierra Wireless MC8790, MC8791, MC8792 */ + { USB_DEVICE(0x1199, 0x683E) }, + { USB_DEVICE(0x1199, 0x6850) }, /* Sierra Wireless AirCard 880 */ + { USB_DEVICE(0x1199, 0x6851) }, /* Sierra Wireless AirCard 881 */ + { USB_DEVICE(0x1199, 0x6852) }, /* Sierra Wireless AirCard 880 E */ + { USB_DEVICE(0x1199, 0x6853) }, /* Sierra Wireless AirCard 881 E */ + { USB_DEVICE(0x1199, 0x6855) }, /* Sierra Wireless AirCard 880 U */ + { USB_DEVICE(0x1199, 0x6856) }, /* Sierra Wireless AirCard 881 U */ + { USB_DEVICE(0x1199, 0x6859) }, /* Sierra Wireless AirCard 885 E */ + { USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */ + /* Sierra Wireless C885 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)}, + /* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)}, + /* Sierra Wireless C22/C33 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6891, 0xFF, 0xFF, 0xFF)}, + /* Sierra Wireless HSPA Non-Composite Device */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)}, + { USB_DEVICE(0x1199, 0x6893) }, /* Sierra Wireless Device */ + /* Sierra Wireless Direct IP modems */ + { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68A3, 0xFF, 0xFF, 0xFF), + .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist + }, + { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x68AA, 0xFF, 0xFF, 0xFF), + .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist + }, + /* AT&T Direct IP LTE modems */ + { USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68AA, 0xFF, 0xFF, 0xFF), + .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist + }, + /* Airprime/Sierra Wireless Direct IP modems */ + { USB_DEVICE_AND_INTERFACE_INFO(0x0F3D, 0x68A3, 0xFF, 0xFF, 0xFF), + .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist + }, + + { } +}; +MODULE_DEVICE_TABLE(usb, id_table); + + +struct sierra_port_private { + spinlock_t lock; /* lock the structure */ + int outstanding_urbs; /* number of out urbs in flight */ + struct usb_anchor active; + struct usb_anchor delayed; + + int num_out_urbs; + int num_in_urbs; + /* Input endpoints and buffers for this port */ + struct urb *in_urbs[N_IN_URB_HM]; + + /* Settings for the port */ + int rts_state; /* Handshaking pins (outputs) */ + int dtr_state; + int cts_state; /* Handshaking pins (inputs) */ + int dsr_state; + int dcd_state; + int ri_state; +}; + +static int sierra_send_setup(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct sierra_port_private *portdata; + __u16 interface = 0; + int val = 0; + int do_send = 0; + int retval; + + portdata = usb_get_serial_port_data(port); + + if (portdata->dtr_state) + val |= 0x01; + if (portdata->rts_state) + val |= 0x02; + + /* If composite device then properly report interface */ + if (serial->num_ports == 1) { + interface = sierra_calc_interface(serial); + /* Control message is sent only to interfaces with + * interrupt_in endpoints + */ + if (port->interrupt_in_urb) { + /* send control message */ + do_send = 1; + } + } + + /* Otherwise the need to do non-composite mapping */ + else { + if (port->bulk_out_endpointAddress == 2) + interface = 0; + else if (port->bulk_out_endpointAddress == 4) + interface = 1; + else if (port->bulk_out_endpointAddress == 5) + interface = 2; + + do_send = 1; + } + if (!do_send) + return 0; + + retval = usb_autopm_get_interface(serial->interface); + if (retval < 0) + return retval; + + retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + 0x22, 0x21, val, interface, NULL, 0, USB_CTRL_SET_TIMEOUT); + usb_autopm_put_interface(serial->interface); + + return retval; +} + +static int sierra_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned int value; + struct sierra_port_private *portdata; + + portdata = usb_get_serial_port_data(port); + + value = ((portdata->rts_state) ? TIOCM_RTS : 0) | + ((portdata->dtr_state) ? TIOCM_DTR : 0) | + ((portdata->cts_state) ? TIOCM_CTS : 0) | + ((portdata->dsr_state) ? TIOCM_DSR : 0) | + ((portdata->dcd_state) ? TIOCM_CAR : 0) | + ((portdata->ri_state) ? TIOCM_RNG : 0); + + return value; +} + +static int sierra_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct sierra_port_private *portdata; + + portdata = usb_get_serial_port_data(port); + + if (set & TIOCM_RTS) + portdata->rts_state = 1; + if (set & TIOCM_DTR) + portdata->dtr_state = 1; + + if (clear & TIOCM_RTS) + portdata->rts_state = 0; + if (clear & TIOCM_DTR) + portdata->dtr_state = 0; + return sierra_send_setup(port); +} + +static void sierra_release_urb(struct urb *urb) +{ + if (urb) { + kfree(urb->transfer_buffer); + usb_free_urb(urb); + } +} + +static void sierra_outdat_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + struct sierra_intf_private *intfdata; + int status = urb->status; + + intfdata = usb_get_serial_data(port->serial); + + /* free up the transfer buffer, as usb_free_urb() does not do this */ + kfree(urb->transfer_buffer); + usb_autopm_put_interface_async(port->serial->interface); + if (status) + dev_dbg(&port->dev, "%s - nonzero write bulk status " + "received: %d\n", __func__, status); + + spin_lock(&portdata->lock); + --portdata->outstanding_urbs; + spin_unlock(&portdata->lock); + spin_lock(&intfdata->susp_lock); + --intfdata->in_flight; + spin_unlock(&intfdata->susp_lock); + + usb_serial_port_softint(port); +} + +/* Write */ +static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + struct sierra_port_private *portdata; + struct sierra_intf_private *intfdata; + struct usb_serial *serial = port->serial; + unsigned long flags; + unsigned char *buffer; + struct urb *urb; + size_t writesize = min((size_t)count, (size_t)MAX_TRANSFER); + int retval = 0; + + /* verify that we actually have some data to write */ + if (count == 0) + return 0; + + portdata = usb_get_serial_port_data(port); + intfdata = usb_get_serial_data(serial); + + dev_dbg(&port->dev, "%s: write (%zd bytes)\n", __func__, writesize); + spin_lock_irqsave(&portdata->lock, flags); + dev_dbg(&port->dev, "%s - outstanding_urbs: %d\n", __func__, + portdata->outstanding_urbs); + if (portdata->outstanding_urbs > portdata->num_out_urbs) { + spin_unlock_irqrestore(&portdata->lock, flags); + dev_dbg(&port->dev, "%s - write limit hit\n", __func__); + return 0; + } + portdata->outstanding_urbs++; + dev_dbg(&port->dev, "%s - 1, outstanding_urbs: %d\n", __func__, + portdata->outstanding_urbs); + spin_unlock_irqrestore(&portdata->lock, flags); + + retval = usb_autopm_get_interface_async(serial->interface); + if (retval < 0) { + spin_lock_irqsave(&portdata->lock, flags); + portdata->outstanding_urbs--; + spin_unlock_irqrestore(&portdata->lock, flags); + goto error_simple; + } + + buffer = kmalloc(writesize, GFP_ATOMIC); + if (!buffer) { + retval = -ENOMEM; + goto error_no_buffer; + } + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + retval = -ENOMEM; + goto error_no_urb; + } + + memcpy(buffer, buf, writesize); + + usb_serial_debug_data(&port->dev, __func__, writesize, buffer); + + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, + port->bulk_out_endpointAddress), + buffer, writesize, sierra_outdat_callback, port); + + /* Handle the need to send a zero length packet */ + urb->transfer_flags |= URB_ZERO_PACKET; + + spin_lock_irqsave(&intfdata->susp_lock, flags); + + if (intfdata->suspended) { + usb_anchor_urb(urb, &portdata->delayed); + spin_unlock_irqrestore(&intfdata->susp_lock, flags); + goto skip_power; + } else { + usb_anchor_urb(urb, &portdata->active); + } + /* send it down the pipe */ + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) { + usb_unanchor_urb(urb); + spin_unlock_irqrestore(&intfdata->susp_lock, flags); + dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed " + "with status = %d\n", __func__, retval); + goto error; + } else { + intfdata->in_flight++; + spin_unlock_irqrestore(&intfdata->susp_lock, flags); + } + +skip_power: + /* we are done with this urb, so let the host driver + * really free it when it is finished with it */ + usb_free_urb(urb); + + return writesize; +error: + usb_free_urb(urb); +error_no_urb: + kfree(buffer); +error_no_buffer: + spin_lock_irqsave(&portdata->lock, flags); + --portdata->outstanding_urbs; + dev_dbg(&port->dev, "%s - 2. outstanding_urbs: %d\n", __func__, + portdata->outstanding_urbs); + spin_unlock_irqrestore(&portdata->lock, flags); + usb_autopm_put_interface_async(serial->interface); +error_simple: + return retval; +} + +static void sierra_indat_callback(struct urb *urb) +{ + int err; + int endpoint; + struct usb_serial_port *port; + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + + endpoint = usb_pipeendpoint(urb->pipe); + port = urb->context; + + if (status) { + dev_dbg(&port->dev, "%s: nonzero status: %d on" + " endpoint %02x\n", __func__, status, endpoint); + } else { + if (urb->actual_length) { + tty_insert_flip_string(&port->port, data, + urb->actual_length); + tty_flip_buffer_push(&port->port); + + usb_serial_debug_data(&port->dev, __func__, + urb->actual_length, data); + } else { + dev_dbg(&port->dev, "%s: empty read urb" + " received\n", __func__); + } + } + + /* Resubmit urb so we continue receiving */ + if (status != -ESHUTDOWN && status != -EPERM) { + usb_mark_last_busy(port->serial->dev); + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err && err != -EPERM) + dev_err(&port->dev, "resubmit read urb failed." + "(%d)\n", err); + } +} + +static void sierra_instat_callback(struct urb *urb) +{ + int err; + int status = urb->status; + struct usb_serial_port *port = urb->context; + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + + dev_dbg(&port->dev, "%s: urb %p port %p has data %p\n", __func__, + urb, port, portdata); + + if (status == 0) { + struct usb_ctrlrequest *req_pkt = + (struct usb_ctrlrequest *)urb->transfer_buffer; + + if (!req_pkt) { + dev_dbg(&port->dev, "%s: NULL req_pkt\n", + __func__); + return; + } + if ((req_pkt->bRequestType == 0xA1) && + (req_pkt->bRequest == 0x20)) { + int old_dcd_state; + unsigned char signals = *((unsigned char *) + urb->transfer_buffer + + sizeof(struct usb_ctrlrequest)); + + dev_dbg(&port->dev, "%s: signal x%x\n", __func__, + signals); + + old_dcd_state = portdata->dcd_state; + portdata->cts_state = 1; + portdata->dcd_state = ((signals & 0x01) ? 1 : 0); + portdata->dsr_state = ((signals & 0x02) ? 1 : 0); + portdata->ri_state = ((signals & 0x08) ? 1 : 0); + + if (old_dcd_state && !portdata->dcd_state) + tty_port_tty_hangup(&port->port, true); + } else { + dev_dbg(&port->dev, "%s: type %x req %x\n", + __func__, req_pkt->bRequestType, + req_pkt->bRequest); + } + } else + dev_dbg(&port->dev, "%s: error %d\n", __func__, status); + + /* Resubmit urb so we continue receiving IRQ data */ + if (status != -ESHUTDOWN && status != -ENOENT) { + usb_mark_last_busy(serial->dev); + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err && err != -EPERM) + dev_err(&port->dev, "%s: resubmit intr urb " + "failed. (%d)\n", __func__, err); + } +} + +static int sierra_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + unsigned long flags; + + /* try to give a good number back based on if we have any free urbs at + * this point in time */ + spin_lock_irqsave(&portdata->lock, flags); + if (portdata->outstanding_urbs > (portdata->num_out_urbs * 2) / 3) { + spin_unlock_irqrestore(&portdata->lock, flags); + dev_dbg(&port->dev, "%s - write limit hit\n", __func__); + return 0; + } + spin_unlock_irqrestore(&portdata->lock, flags); + + return 2048; +} + +static int sierra_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + unsigned long flags; + int chars; + + /* NOTE: This overcounts somewhat. */ + spin_lock_irqsave(&portdata->lock, flags); + chars = portdata->outstanding_urbs * MAX_TRANSFER; + spin_unlock_irqrestore(&portdata->lock, flags); + + dev_dbg(&port->dev, "%s - %d\n", __func__, chars); + + return chars; +} + +static void sierra_stop_rx_urbs(struct usb_serial_port *port) +{ + int i; + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + + for (i = 0; i < portdata->num_in_urbs; i++) + usb_kill_urb(portdata->in_urbs[i]); + + usb_kill_urb(port->interrupt_in_urb); +} + +static int sierra_submit_rx_urbs(struct usb_serial_port *port, gfp_t mem_flags) +{ + int ok_cnt; + int err = -EINVAL; + int i; + struct urb *urb; + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + + ok_cnt = 0; + for (i = 0; i < portdata->num_in_urbs; i++) { + urb = portdata->in_urbs[i]; + if (!urb) + continue; + err = usb_submit_urb(urb, mem_flags); + if (err) { + dev_err(&port->dev, "%s: submit urb failed: %d\n", + __func__, err); + } else { + ok_cnt++; + } + } + + if (ok_cnt && port->interrupt_in_urb) { + err = usb_submit_urb(port->interrupt_in_urb, mem_flags); + if (err) { + dev_err(&port->dev, "%s: submit intr urb failed: %d\n", + __func__, err); + } + } + + if (ok_cnt > 0) /* at least one rx urb submitted */ + return 0; + else + return err; +} + +static struct urb *sierra_setup_urb(struct usb_serial *serial, int endpoint, + int dir, void *ctx, int len, + gfp_t mem_flags, + usb_complete_t callback) +{ + struct urb *urb; + u8 *buf; + + urb = usb_alloc_urb(0, mem_flags); + if (!urb) + return NULL; + + buf = kmalloc(len, mem_flags); + if (buf) { + /* Fill URB using supplied data */ + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, endpoint) | dir, + buf, len, callback, ctx); + + dev_dbg(&serial->dev->dev, "%s %c u : %p d:%p\n", __func__, + dir == USB_DIR_IN ? 'i' : 'o', urb, buf); + } else { + sierra_release_urb(urb); + urb = NULL; + } + + return urb; +} + +static void sierra_close(struct usb_serial_port *port) +{ + int i; + struct usb_serial *serial = port->serial; + struct sierra_port_private *portdata; + struct sierra_intf_private *intfdata = usb_get_serial_data(serial); + struct urb *urb; + + portdata = usb_get_serial_port_data(port); + + /* + * Need to take susp_lock to make sure port is not already being + * resumed, but no need to hold it due to ASYNC_INITIALIZED. + */ + spin_lock_irq(&intfdata->susp_lock); + if (--intfdata->open_ports == 0) + serial->interface->needs_remote_wakeup = 0; + spin_unlock_irq(&intfdata->susp_lock); + + for (;;) { + urb = usb_get_from_anchor(&portdata->delayed); + if (!urb) + break; + kfree(urb->transfer_buffer); + usb_free_urb(urb); + usb_autopm_put_interface_async(serial->interface); + spin_lock(&portdata->lock); + portdata->outstanding_urbs--; + spin_unlock(&portdata->lock); + } + + sierra_stop_rx_urbs(port); + usb_kill_anchored_urbs(&portdata->active); + + for (i = 0; i < portdata->num_in_urbs; i++) { + sierra_release_urb(portdata->in_urbs[i]); + portdata->in_urbs[i] = NULL; + } + + usb_autopm_get_interface_no_resume(serial->interface); +} + +static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct sierra_port_private *portdata; + struct usb_serial *serial = port->serial; + struct sierra_intf_private *intfdata = usb_get_serial_data(serial); + int i; + int err; + int endpoint; + struct urb *urb; + + portdata = usb_get_serial_port_data(port); + + endpoint = port->bulk_in_endpointAddress; + for (i = 0; i < portdata->num_in_urbs; i++) { + urb = sierra_setup_urb(serial, endpoint, USB_DIR_IN, port, + IN_BUFLEN, GFP_KERNEL, + sierra_indat_callback); + portdata->in_urbs[i] = urb; + } + /* clear halt condition */ + usb_clear_halt(serial->dev, + usb_sndbulkpipe(serial->dev, endpoint) | USB_DIR_IN); + + err = sierra_submit_rx_urbs(port, GFP_KERNEL); + if (err) + goto err_submit; + + spin_lock_irq(&intfdata->susp_lock); + if (++intfdata->open_ports == 1) + serial->interface->needs_remote_wakeup = 1; + spin_unlock_irq(&intfdata->susp_lock); + usb_autopm_put_interface(serial->interface); + + return 0; + +err_submit: + sierra_stop_rx_urbs(port); + + for (i = 0; i < portdata->num_in_urbs; i++) { + sierra_release_urb(portdata->in_urbs[i]); + portdata->in_urbs[i] = NULL; + } + + return err; +} + + +static void sierra_dtr_rts(struct usb_serial_port *port, int on) +{ + struct sierra_port_private *portdata; + + portdata = usb_get_serial_port_data(port); + portdata->rts_state = on; + portdata->dtr_state = on; + + sierra_send_setup(port); +} + +static int sierra_startup(struct usb_serial *serial) +{ + struct sierra_intf_private *intfdata; + + intfdata = kzalloc(sizeof(*intfdata), GFP_KERNEL); + if (!intfdata) + return -ENOMEM; + + spin_lock_init(&intfdata->susp_lock); + + usb_set_serial_data(serial, intfdata); + + /* Set Device mode to D0 */ + sierra_set_power_state(serial->dev, 0x0000); + + /* Check NMEA and set */ + if (nmea) + sierra_vsc_set_nmea(serial->dev, 1); + + return 0; +} + +static void sierra_release(struct usb_serial *serial) +{ + struct sierra_intf_private *intfdata; + + intfdata = usb_get_serial_data(serial); + kfree(intfdata); +} + +static int sierra_port_probe(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct sierra_port_private *portdata; + const struct sierra_iface_info *himemoryp; + u8 ifnum; + + portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); + if (!portdata) + return -ENOMEM; + + spin_lock_init(&portdata->lock); + init_usb_anchor(&portdata->active); + init_usb_anchor(&portdata->delayed); + + /* Assume low memory requirements */ + portdata->num_out_urbs = N_OUT_URB; + portdata->num_in_urbs = N_IN_URB; + + /* Determine actual memory requirements */ + if (serial->num_ports == 1) { + /* Get interface number for composite device */ + ifnum = sierra_calc_interface(serial); + himemoryp = &typeB_interface_list; + } else { + /* This is really the usb-serial port number of the interface + * rather than the interface number. + */ + ifnum = port->port_number; + himemoryp = &typeA_interface_list; + } + + if (is_himemory(ifnum, himemoryp)) { + portdata->num_out_urbs = N_OUT_URB_HM; + portdata->num_in_urbs = N_IN_URB_HM; + } + + dev_dbg(&port->dev, + "Memory usage (urbs) interface #%d, in=%d, out=%d\n", + ifnum, portdata->num_in_urbs, portdata->num_out_urbs); + + usb_set_serial_port_data(port, portdata); + + return 0; +} + +static int sierra_port_remove(struct usb_serial_port *port) +{ + struct sierra_port_private *portdata; + + portdata = usb_get_serial_port_data(port); + usb_set_serial_port_data(port, NULL); + kfree(portdata); + + return 0; +} + +#ifdef CONFIG_PM +static void stop_read_write_urbs(struct usb_serial *serial) +{ + int i; + struct usb_serial_port *port; + struct sierra_port_private *portdata; + + /* Stop reading/writing urbs */ + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); + if (!portdata) + continue; + sierra_stop_rx_urbs(port); + usb_kill_anchored_urbs(&portdata->active); + } +} + +static int sierra_suspend(struct usb_serial *serial, pm_message_t message) +{ + struct sierra_intf_private *intfdata = usb_get_serial_data(serial); + + spin_lock_irq(&intfdata->susp_lock); + if (PMSG_IS_AUTO(message)) { + if (intfdata->in_flight) { + spin_unlock_irq(&intfdata->susp_lock); + return -EBUSY; + } + } + intfdata->suspended = 1; + spin_unlock_irq(&intfdata->susp_lock); + + stop_read_write_urbs(serial); + + return 0; +} + +/* Caller must hold susp_lock. */ +static int sierra_submit_delayed_urbs(struct usb_serial_port *port) +{ + struct sierra_port_private *portdata = usb_get_serial_port_data(port); + struct sierra_intf_private *intfdata; + struct urb *urb; + int ec = 0; + int err; + + intfdata = usb_get_serial_data(port->serial); + + for (;;) { + urb = usb_get_from_anchor(&portdata->delayed); + if (!urb) + break; + + usb_anchor_urb(urb, &portdata->active); + intfdata->in_flight++; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) { + dev_err(&port->dev, "%s - submit urb failed: %d", + __func__, err); + ec++; + intfdata->in_flight--; + usb_unanchor_urb(urb); + kfree(urb->transfer_buffer); + usb_free_urb(urb); + + spin_lock(&portdata->lock); + portdata->outstanding_urbs--; + spin_unlock(&portdata->lock); + } + } + + if (ec) + return -EIO; + + return 0; +} + +static int sierra_resume(struct usb_serial *serial) +{ + struct usb_serial_port *port; + struct sierra_intf_private *intfdata = usb_get_serial_data(serial); + int ec = 0; + int i, err; + + spin_lock_irq(&intfdata->susp_lock); + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + + if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) + continue; + + err = sierra_submit_delayed_urbs(port); + if (err) + ec++; + + err = sierra_submit_rx_urbs(port, GFP_ATOMIC); + if (err) + ec++; + } + intfdata->suspended = 0; + spin_unlock_irq(&intfdata->susp_lock); + + return ec ? -EIO : 0; +} + +#else +#define sierra_suspend NULL +#define sierra_resume NULL +#endif + +static struct usb_serial_driver sierra_device = { + .driver = { + .owner = THIS_MODULE, + .name = "sierra", + }, + .description = "Sierra USB modem", + .id_table = id_table, + .calc_num_ports = sierra_calc_num_ports, + .probe = sierra_probe, + .open = sierra_open, + .close = sierra_close, + .dtr_rts = sierra_dtr_rts, + .write = sierra_write, + .write_room = sierra_write_room, + .chars_in_buffer = sierra_chars_in_buffer, + .tiocmget = sierra_tiocmget, + .tiocmset = sierra_tiocmset, + .attach = sierra_startup, + .release = sierra_release, + .port_probe = sierra_port_probe, + .port_remove = sierra_port_remove, + .suspend = sierra_suspend, + .resume = sierra_resume, + .read_int_callback = sierra_instat_callback, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &sierra_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +module_param(nmea, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(nmea, "NMEA streaming"); diff --git a/kernel/drivers/usb/serial/spcp8x5.c b/kernel/drivers/usb/serial/spcp8x5.c new file mode 100644 index 000000000..ef0dbf070 --- /dev/null +++ b/kernel/drivers/usb/serial/spcp8x5.c @@ -0,0 +1,491 @@ +/* + * spcp8x5 USB to serial adaptor driver + * + * Copyright (C) 2010-2013 Johan Hovold (jhovold@gmail.com) + * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn) + * Copyright (C) 2006 S1 Corp. + * + * Original driver for 2.6.10 pl2303 driver by + * Greg Kroah-Hartman (greg@kroah.com) + * Changes for 2.6.20 by Harald Klein <hari@vt100.at> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +#define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver" + +#define SPCP825_QUIRK_NO_UART_STATUS 0x01 +#define SPCP825_QUIRK_NO_WORK_MODE 0x02 + +#define SPCP8x5_007_VID 0x04FC +#define SPCP8x5_007_PID 0x0201 +#define SPCP8x5_008_VID 0x04fc +#define SPCP8x5_008_PID 0x0235 +#define SPCP8x5_PHILIPS_VID 0x0471 +#define SPCP8x5_PHILIPS_PID 0x081e +#define SPCP8x5_INTERMATIC_VID 0x04FC +#define SPCP8x5_INTERMATIC_PID 0x0204 +#define SPCP8x5_835_VID 0x04fc +#define SPCP8x5_835_PID 0x0231 + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)}, + { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)}, + { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)}, + { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)}, + { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID), + .driver_info = SPCP825_QUIRK_NO_UART_STATUS | + SPCP825_QUIRK_NO_WORK_MODE }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +struct spcp8x5_usb_ctrl_arg { + u8 type; + u8 cmd; + u8 cmd_type; + u16 value; + u16 index; + u16 length; +}; + + +/* spcp8x5 spec register define */ +#define MCR_CONTROL_LINE_RTS 0x02 +#define MCR_CONTROL_LINE_DTR 0x01 +#define MCR_DTR 0x01 +#define MCR_RTS 0x02 + +#define MSR_STATUS_LINE_DCD 0x80 +#define MSR_STATUS_LINE_RI 0x40 +#define MSR_STATUS_LINE_DSR 0x20 +#define MSR_STATUS_LINE_CTS 0x10 + +/* verdor command here , we should define myself */ +#define SET_DEFAULT 0x40 +#define SET_DEFAULT_TYPE 0x20 + +#define SET_UART_FORMAT 0x40 +#define SET_UART_FORMAT_TYPE 0x21 +#define SET_UART_FORMAT_SIZE_5 0x00 +#define SET_UART_FORMAT_SIZE_6 0x01 +#define SET_UART_FORMAT_SIZE_7 0x02 +#define SET_UART_FORMAT_SIZE_8 0x03 +#define SET_UART_FORMAT_STOP_1 0x00 +#define SET_UART_FORMAT_STOP_2 0x04 +#define SET_UART_FORMAT_PAR_NONE 0x00 +#define SET_UART_FORMAT_PAR_ODD 0x10 +#define SET_UART_FORMAT_PAR_EVEN 0x30 +#define SET_UART_FORMAT_PAR_MASK 0xD0 +#define SET_UART_FORMAT_PAR_SPACE 0x90 + +#define GET_UART_STATUS_TYPE 0xc0 +#define GET_UART_STATUS 0x22 +#define GET_UART_STATUS_MSR 0x06 + +#define SET_UART_STATUS 0x40 +#define SET_UART_STATUS_TYPE 0x23 +#define SET_UART_STATUS_MCR 0x0004 +#define SET_UART_STATUS_MCR_DTR 0x01 +#define SET_UART_STATUS_MCR_RTS 0x02 +#define SET_UART_STATUS_MCR_LOOP 0x10 + +#define SET_WORKING_MODE 0x40 +#define SET_WORKING_MODE_TYPE 0x24 +#define SET_WORKING_MODE_U2C 0x00 +#define SET_WORKING_MODE_RS485 0x01 +#define SET_WORKING_MODE_PDMA 0x02 +#define SET_WORKING_MODE_SPP 0x03 + +#define SET_FLOWCTL_CHAR 0x40 +#define SET_FLOWCTL_CHAR_TYPE 0x25 + +#define GET_VERSION 0xc0 +#define GET_VERSION_TYPE 0x26 + +#define SET_REGISTER 0x40 +#define SET_REGISTER_TYPE 0x27 + +#define GET_REGISTER 0xc0 +#define GET_REGISTER_TYPE 0x28 + +#define SET_RAM 0x40 +#define SET_RAM_TYPE 0x31 + +#define GET_RAM 0xc0 +#define GET_RAM_TYPE 0x32 + +/* how come ??? */ +#define UART_STATE 0x08 +#define UART_STATE_TRANSIENT_MASK 0x75 +#define UART_DCD 0x01 +#define UART_DSR 0x02 +#define UART_BREAK_ERROR 0x04 +#define UART_RING 0x08 +#define UART_FRAME_ERROR 0x10 +#define UART_PARITY_ERROR 0x20 +#define UART_OVERRUN_ERROR 0x40 +#define UART_CTS 0x80 + +struct spcp8x5_private { + unsigned quirks; + spinlock_t lock; + u8 line_control; +}; + +static int spcp8x5_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + usb_set_serial_data(serial, (void *)id); + + return 0; +} + +static int spcp8x5_port_probe(struct usb_serial_port *port) +{ + const struct usb_device_id *id = usb_get_serial_data(port->serial); + struct spcp8x5_private *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + priv->quirks = id->driver_info; + + usb_set_serial_port_data(port, priv); + + port->port.drain_delay = 256; + + return 0; +} + +static int spcp8x5_port_remove(struct usb_serial_port *port) +{ + struct spcp8x5_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} + +static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr) +{ + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + struct usb_device *dev = port->serial->dev; + int retval; + + if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS) + return -EPERM; + + retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + SET_UART_STATUS_TYPE, SET_UART_STATUS, + mcr, 0x04, NULL, 0, 100); + if (retval != 0) { + dev_err(&port->dev, "failed to set control lines: %d\n", + retval); + } + return retval; +} + +static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status) +{ + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + struct usb_device *dev = port->serial->dev; + u8 *buf; + int ret; + + if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS) + return -EPERM; + + buf = kzalloc(1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + GET_UART_STATUS, GET_UART_STATUS_TYPE, + 0, GET_UART_STATUS_MSR, buf, 1, 100); + if (ret < 0) + dev_err(&port->dev, "failed to get modem status: %d\n", ret); + + dev_dbg(&port->dev, "0xc0:0x22:0:6 %d - 0x02%x\n", ret, *buf); + *status = *buf; + kfree(buf); + + return ret; +} + +static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value, + u16 index) +{ + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + struct usb_device *dev = port->serial->dev; + int ret; + + if (priv->quirks & SPCP825_QUIRK_NO_WORK_MODE) + return; + + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + SET_WORKING_MODE_TYPE, SET_WORKING_MODE, + value, index, NULL, 0, 100); + dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index); + if (ret < 0) + dev_err(&port->dev, "failed to set work mode: %d\n", ret); +} + +static int spcp8x5_carrier_raised(struct usb_serial_port *port) +{ + u8 msr; + int ret; + + ret = spcp8x5_get_msr(port, &msr); + if (ret || msr & MSR_STATUS_LINE_DCD) + return 1; + + return 0; +} + +static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on) +{ + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 control; + + spin_lock_irqsave(&priv->lock, flags); + if (on) + priv->line_control = MCR_CONTROL_LINE_DTR + | MCR_CONTROL_LINE_RTS; + else + priv->line_control &= ~ (MCR_CONTROL_LINE_DTR + | MCR_CONTROL_LINE_RTS); + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + spcp8x5_set_ctrl_line(port, control); +} + +static void spcp8x5_init_termios(struct tty_struct *tty) +{ + tty->termios = tty_std_termios; + tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL; + tty->termios.c_ispeed = 115200; + tty->termios.c_ospeed = 115200; +} + +static void spcp8x5_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + struct usb_serial *serial = port->serial; + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + unsigned int cflag = tty->termios.c_cflag; + unsigned short uartdata; + unsigned char buf[2] = {0, 0}; + int baud; + int i; + u8 control; + + /* check that they really want us to change something */ + if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) + return; + + /* set DTR/RTS active */ + spin_lock_irqsave(&priv->lock, flags); + control = priv->line_control; + if (old_termios && (old_termios->c_cflag & CBAUD) == B0) { + priv->line_control |= MCR_DTR; + if (!(old_termios->c_cflag & CRTSCTS)) + priv->line_control |= MCR_RTS; + } + if (control != priv->line_control) { + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + spcp8x5_set_ctrl_line(port, control); + } else { + spin_unlock_irqrestore(&priv->lock, flags); + } + + /* Set Baud Rate */ + baud = tty_get_baud_rate(tty); + switch (baud) { + case 300: buf[0] = 0x00; break; + case 600: buf[0] = 0x01; break; + case 1200: buf[0] = 0x02; break; + case 2400: buf[0] = 0x03; break; + case 4800: buf[0] = 0x04; break; + case 9600: buf[0] = 0x05; break; + case 19200: buf[0] = 0x07; break; + case 38400: buf[0] = 0x09; break; + case 57600: buf[0] = 0x0a; break; + case 115200: buf[0] = 0x0b; break; + case 230400: buf[0] = 0x0c; break; + case 460800: buf[0] = 0x0d; break; + case 921600: buf[0] = 0x0e; break; +/* case 1200000: buf[0] = 0x0f; break; */ +/* case 2400000: buf[0] = 0x10; break; */ + case 3000000: buf[0] = 0x11; break; +/* case 6000000: buf[0] = 0x12; break; */ + case 0: + case 1000000: + buf[0] = 0x0b; break; + default: + dev_err(&port->dev, "unsupported baudrate, using 9600\n"); + } + + /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */ + switch (cflag & CSIZE) { + case CS5: + buf[1] |= SET_UART_FORMAT_SIZE_5; + break; + case CS6: + buf[1] |= SET_UART_FORMAT_SIZE_6; + break; + case CS7: + buf[1] |= SET_UART_FORMAT_SIZE_7; + break; + default: + case CS8: + buf[1] |= SET_UART_FORMAT_SIZE_8; + break; + } + + /* Set Stop bit2 : 0:1bit 1:2bit */ + buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 : + SET_UART_FORMAT_STOP_1; + + /* Set Parity bit3-4 01:Odd 11:Even */ + if (cflag & PARENB) { + buf[1] |= (cflag & PARODD) ? + SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ; + } else { + buf[1] |= SET_UART_FORMAT_PAR_NONE; + } + uartdata = buf[0] | buf[1]<<8; + + i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + SET_UART_FORMAT_TYPE, SET_UART_FORMAT, + uartdata, 0, NULL, 0, 100); + if (i < 0) + dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n", + uartdata, i); + dev_dbg(&port->dev, "0x21:0x40:0:0 %d\n", i); + + if (cflag & CRTSCTS) { + /* enable hardware flow control */ + spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C); + } +} + +static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + int ret; + + usb_clear_halt(serial->dev, port->write_urb->pipe); + usb_clear_halt(serial->dev, port->read_urb->pipe); + + ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + 0x09, 0x00, + 0x01, 0x00, NULL, 0x00, 100); + if (ret) + return ret; + + spcp8x5_set_ctrl_line(port, priv->line_control); + + if (tty) + spcp8x5_set_termios(tty, port, NULL); + + return usb_serial_generic_open(tty, port); +} + +static int spcp8x5_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 control; + + spin_lock_irqsave(&priv->lock, flags); + if (set & TIOCM_RTS) + priv->line_control |= MCR_RTS; + if (set & TIOCM_DTR) + priv->line_control |= MCR_DTR; + if (clear & TIOCM_RTS) + priv->line_control &= ~MCR_RTS; + if (clear & TIOCM_DTR) + priv->line_control &= ~MCR_DTR; + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + + return spcp8x5_set_ctrl_line(port, control); +} + +static int spcp8x5_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct spcp8x5_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + unsigned int mcr; + u8 status; + unsigned int result; + + result = spcp8x5_get_msr(port, &status); + if (result) + return result; + + spin_lock_irqsave(&priv->lock, flags); + mcr = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + + result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) + | ((mcr & MCR_RTS) ? TIOCM_RTS : 0) + | ((status & MSR_STATUS_LINE_CTS) ? TIOCM_CTS : 0) + | ((status & MSR_STATUS_LINE_DSR) ? TIOCM_DSR : 0) + | ((status & MSR_STATUS_LINE_RI) ? TIOCM_RI : 0) + | ((status & MSR_STATUS_LINE_DCD) ? TIOCM_CD : 0); + + return result; +} + +static struct usb_serial_driver spcp8x5_device = { + .driver = { + .owner = THIS_MODULE, + .name = "SPCP8x5", + }, + .id_table = id_table, + .num_ports = 1, + .open = spcp8x5_open, + .dtr_rts = spcp8x5_dtr_rts, + .carrier_raised = spcp8x5_carrier_raised, + .set_termios = spcp8x5_set_termios, + .init_termios = spcp8x5_init_termios, + .tiocmget = spcp8x5_tiocmget, + .tiocmset = spcp8x5_tiocmset, + .probe = spcp8x5_probe, + .port_probe = spcp8x5_port_probe, + .port_remove = spcp8x5_port_remove, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &spcp8x5_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/ssu100.c b/kernel/drivers/usb/serial/ssu100.c new file mode 100644 index 000000000..70a098de4 --- /dev/null +++ b/kernel/drivers/usb/serial/ssu100.c @@ -0,0 +1,566 @@ +/* + * usb-serial driver for Quatech SSU-100 + * + * based on ftdi_sio.c and the original serqt_usb.c from Quatech + * + */ + +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/serial.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/serial_reg.h> +#include <linux/uaccess.h> + +#define QT_OPEN_CLOSE_CHANNEL 0xca +#define QT_SET_GET_DEVICE 0xc2 +#define QT_SET_GET_REGISTER 0xc0 +#define QT_GET_SET_PREBUF_TRIG_LVL 0xcc +#define QT_SET_ATF 0xcd +#define QT_GET_SET_UART 0xc1 +#define QT_TRANSFER_IN 0xc0 +#define QT_HW_FLOW_CONTROL_MASK 0xc5 +#define QT_SW_FLOW_CONTROL_MASK 0xc6 + +#define SERIAL_MSR_MASK 0xf0 + +#define SERIAL_CRTSCTS ((UART_MCR_RTS << 8) | UART_MSR_CTS) + +#define SERIAL_EVEN_PARITY (UART_LCR_PARITY | UART_LCR_EPAR) + +#define MAX_BAUD_RATE 460800 + +#define ATC_DISABLED 0x00 +#define DUPMODE_BITS 0xc0 +#define RR_BITS 0x03 +#define LOOPMODE_BITS 0x41 +#define RS232_MODE 0x00 +#define RTSCTS_TO_CONNECTOR 0x40 +#define CLKS_X4 0x02 +#define FULLPWRBIT 0x00000080 +#define NEXT_BOARD_POWER_BIT 0x00000004 + +#define DRIVER_DESC "Quatech SSU-100 USB to Serial Driver" + +#define USB_VENDOR_ID_QUATECH 0x061d /* Quatech VID */ +#define QUATECH_SSU100 0xC020 /* SSU100 */ + +static const struct usb_device_id id_table[] = { + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100)}, + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +struct ssu100_port_private { + spinlock_t status_lock; + u8 shadowLSR; + u8 shadowMSR; +}; + +static inline int ssu100_control_msg(struct usb_device *dev, + u8 request, u16 data, u16 index) +{ + return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + request, 0x40, data, index, + NULL, 0, 300); +} + +static inline int ssu100_setdevice(struct usb_device *dev, u8 *data) +{ + u16 x = ((u16)(data[1] << 8) | (u16)(data[0])); + + return ssu100_control_msg(dev, QT_SET_GET_DEVICE, x, 0); +} + + +static inline int ssu100_getdevice(struct usb_device *dev, u8 *data) +{ + return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + QT_SET_GET_DEVICE, 0xc0, 0, 0, + data, 3, 300); +} + +static inline int ssu100_getregister(struct usb_device *dev, + unsigned short uart, + unsigned short reg, + u8 *data) +{ + return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + QT_SET_GET_REGISTER, 0xc0, reg, + uart, data, sizeof(*data), 300); + +} + + +static inline int ssu100_setregister(struct usb_device *dev, + unsigned short uart, + unsigned short reg, + u16 data) +{ + u16 value = (data << 8) | reg; + + return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + QT_SET_GET_REGISTER, 0x40, value, uart, + NULL, 0, 300); + +} + +#define set_mctrl(dev, set) update_mctrl((dev), (set), 0) +#define clear_mctrl(dev, clear) update_mctrl((dev), 0, (clear)) + +/* these do not deal with device that have more than 1 port */ +static inline int update_mctrl(struct usb_device *dev, unsigned int set, + unsigned int clear) +{ + unsigned urb_value; + int result; + + if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) { + dev_dbg(&dev->dev, "%s - DTR|RTS not being set|cleared\n", __func__); + return 0; /* no change */ + } + + clear &= ~set; /* 'set' takes precedence over 'clear' */ + urb_value = 0; + if (set & TIOCM_DTR) + urb_value |= UART_MCR_DTR; + if (set & TIOCM_RTS) + urb_value |= UART_MCR_RTS; + + result = ssu100_setregister(dev, 0, UART_MCR, urb_value); + if (result < 0) + dev_dbg(&dev->dev, "%s Error from MODEM_CTRL urb\n", __func__); + + return result; +} + +static int ssu100_initdevice(struct usb_device *dev) +{ + u8 *data; + int result = 0; + + data = kzalloc(3, GFP_KERNEL); + if (!data) + return -ENOMEM; + + result = ssu100_getdevice(dev, data); + if (result < 0) { + dev_dbg(&dev->dev, "%s - get_device failed %i\n", __func__, result); + goto out; + } + + data[1] &= ~FULLPWRBIT; + + result = ssu100_setdevice(dev, data); + if (result < 0) { + dev_dbg(&dev->dev, "%s - setdevice failed %i\n", __func__, result); + goto out; + } + + result = ssu100_control_msg(dev, QT_GET_SET_PREBUF_TRIG_LVL, 128, 0); + if (result < 0) { + dev_dbg(&dev->dev, "%s - set prebuffer level failed %i\n", __func__, result); + goto out; + } + + result = ssu100_control_msg(dev, QT_SET_ATF, ATC_DISABLED, 0); + if (result < 0) { + dev_dbg(&dev->dev, "%s - set ATFprebuffer level failed %i\n", __func__, result); + goto out; + } + + result = ssu100_getdevice(dev, data); + if (result < 0) { + dev_dbg(&dev->dev, "%s - get_device failed %i\n", __func__, result); + goto out; + } + + data[0] &= ~(RR_BITS | DUPMODE_BITS); + data[0] |= CLKS_X4; + data[1] &= ~(LOOPMODE_BITS); + data[1] |= RS232_MODE; + + result = ssu100_setdevice(dev, data); + if (result < 0) { + dev_dbg(&dev->dev, "%s - setdevice failed %i\n", __func__, result); + goto out; + } + +out: kfree(data); + return result; + +} + + +static void ssu100_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old_termios) +{ + struct usb_device *dev = port->serial->dev; + struct ktermios *termios = &tty->termios; + u16 baud, divisor, remainder; + unsigned int cflag = termios->c_cflag; + u16 urb_value = 0; /* will hold the new flags */ + int result; + + if (cflag & PARENB) { + if (cflag & PARODD) + urb_value |= UART_LCR_PARITY; + else + urb_value |= SERIAL_EVEN_PARITY; + } + + switch (cflag & CSIZE) { + case CS5: + urb_value |= UART_LCR_WLEN5; + break; + case CS6: + urb_value |= UART_LCR_WLEN6; + break; + case CS7: + urb_value |= UART_LCR_WLEN7; + break; + default: + case CS8: + urb_value |= UART_LCR_WLEN8; + break; + } + + baud = tty_get_baud_rate(tty); + if (!baud) + baud = 9600; + + dev_dbg(&port->dev, "%s - got baud = %d\n", __func__, baud); + + + divisor = MAX_BAUD_RATE / baud; + remainder = MAX_BAUD_RATE % baud; + if (((remainder * 2) >= baud) && (baud != 110)) + divisor++; + + urb_value = urb_value << 8; + + result = ssu100_control_msg(dev, QT_GET_SET_UART, divisor, urb_value); + if (result < 0) + dev_dbg(&port->dev, "%s - set uart failed\n", __func__); + + if (cflag & CRTSCTS) + result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK, + SERIAL_CRTSCTS, 0); + else + result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK, + 0, 0); + if (result < 0) + dev_dbg(&port->dev, "%s - set HW flow control failed\n", __func__); + + if (I_IXOFF(tty) || I_IXON(tty)) { + u16 x = ((u16)(START_CHAR(tty) << 8) | (u16)(STOP_CHAR(tty))); + + result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK, + x, 0); + } else + result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK, + 0, 0); + + if (result < 0) + dev_dbg(&port->dev, "%s - set SW flow control failed\n", __func__); + +} + + +static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct usb_device *dev = port->serial->dev; + struct ssu100_port_private *priv = usb_get_serial_port_data(port); + u8 *data; + int result; + unsigned long flags; + + data = kzalloc(2, GFP_KERNEL); + if (!data) + return -ENOMEM; + + result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + QT_OPEN_CLOSE_CHANNEL, + QT_TRANSFER_IN, 0x01, + 0, data, 2, 300); + if (result < 0) { + dev_dbg(&port->dev, "%s - open failed %i\n", __func__, result); + kfree(data); + return result; + } + + spin_lock_irqsave(&priv->status_lock, flags); + priv->shadowLSR = data[0]; + priv->shadowMSR = data[1]; + spin_unlock_irqrestore(&priv->status_lock, flags); + + kfree(data); + +/* set to 9600 */ + result = ssu100_control_msg(dev, QT_GET_SET_UART, 0x30, 0x0300); + if (result < 0) + dev_dbg(&port->dev, "%s - set uart failed\n", __func__); + + if (tty) + ssu100_set_termios(tty, port, &tty->termios); + + return usb_serial_generic_open(tty, port); +} + +static int get_serial_info(struct usb_serial_port *port, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp; + + if (!retinfo) + return -EFAULT; + + memset(&tmp, 0, sizeof(tmp)); + tmp.line = port->minor; + tmp.port = 0; + tmp.irq = 0; + tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; + tmp.xmit_fifo_size = port->bulk_out_size; + tmp.baud_base = 9600; + tmp.close_delay = 5*HZ; + tmp.closing_wait = 30*HZ; + + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int ssu100_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + + switch (cmd) { + case TIOCGSERIAL: + return get_serial_info(port, + (struct serial_struct __user *) arg); + default: + break; + } + + return -ENOIOCTLCMD; +} + +static int ssu100_attach(struct usb_serial *serial) +{ + return ssu100_initdevice(serial->dev); +} + +static int ssu100_port_probe(struct usb_serial_port *port) +{ + struct ssu100_port_private *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->status_lock); + + usb_set_serial_port_data(port, priv); + + return 0; +} + +static int ssu100_port_remove(struct usb_serial_port *port) +{ + struct ssu100_port_private *priv; + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} + +static int ssu100_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_device *dev = port->serial->dev; + u8 *d; + int r; + + d = kzalloc(2, GFP_KERNEL); + if (!d) + return -ENOMEM; + + r = ssu100_getregister(dev, 0, UART_MCR, d); + if (r < 0) + goto mget_out; + + r = ssu100_getregister(dev, 0, UART_MSR, d+1); + if (r < 0) + goto mget_out; + + r = (d[0] & UART_MCR_DTR ? TIOCM_DTR : 0) | + (d[0] & UART_MCR_RTS ? TIOCM_RTS : 0) | + (d[1] & UART_MSR_CTS ? TIOCM_CTS : 0) | + (d[1] & UART_MSR_DCD ? TIOCM_CAR : 0) | + (d[1] & UART_MSR_RI ? TIOCM_RI : 0) | + (d[1] & UART_MSR_DSR ? TIOCM_DSR : 0); + +mget_out: + kfree(d); + return r; +} + +static int ssu100_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_device *dev = port->serial->dev; + + return update_mctrl(dev, set, clear); +} + +static void ssu100_dtr_rts(struct usb_serial_port *port, int on) +{ + struct usb_device *dev = port->serial->dev; + + /* Disable flow control */ + if (!on) { + if (ssu100_setregister(dev, 0, UART_MCR, 0) < 0) + dev_err(&port->dev, "error from flowcontrol urb\n"); + } + /* drop RTS and DTR */ + if (on) + set_mctrl(dev, TIOCM_DTR | TIOCM_RTS); + else + clear_mctrl(dev, TIOCM_DTR | TIOCM_RTS); +} + +static void ssu100_update_msr(struct usb_serial_port *port, u8 msr) +{ + struct ssu100_port_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->status_lock, flags); + priv->shadowMSR = msr; + spin_unlock_irqrestore(&priv->status_lock, flags); + + if (msr & UART_MSR_ANY_DELTA) { + /* update input line counters */ + if (msr & UART_MSR_DCTS) + port->icount.cts++; + if (msr & UART_MSR_DDSR) + port->icount.dsr++; + if (msr & UART_MSR_DDCD) + port->icount.dcd++; + if (msr & UART_MSR_TERI) + port->icount.rng++; + wake_up_interruptible(&port->port.delta_msr_wait); + } +} + +static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr, + char *tty_flag) +{ + struct ssu100_port_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->status_lock, flags); + priv->shadowLSR = lsr; + spin_unlock_irqrestore(&priv->status_lock, flags); + + *tty_flag = TTY_NORMAL; + if (lsr & UART_LSR_BRK_ERROR_BITS) { + /* we always want to update icount, but we only want to + * update tty_flag for one case */ + if (lsr & UART_LSR_BI) { + port->icount.brk++; + *tty_flag = TTY_BREAK; + usb_serial_handle_break(port); + } + if (lsr & UART_LSR_PE) { + port->icount.parity++; + if (*tty_flag == TTY_NORMAL) + *tty_flag = TTY_PARITY; + } + if (lsr & UART_LSR_FE) { + port->icount.frame++; + if (*tty_flag == TTY_NORMAL) + *tty_flag = TTY_FRAME; + } + if (lsr & UART_LSR_OE) { + port->icount.overrun++; + tty_insert_flip_char(&port->port, 0, TTY_OVERRUN); + } + } + +} + +static void ssu100_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + char *packet = (char *)urb->transfer_buffer; + char flag = TTY_NORMAL; + u32 len = urb->actual_length; + int i; + char *ch; + + if ((len >= 4) && + (packet[0] == 0x1b) && (packet[1] == 0x1b) && + ((packet[2] == 0x00) || (packet[2] == 0x01))) { + if (packet[2] == 0x00) + ssu100_update_lsr(port, packet[3], &flag); + if (packet[2] == 0x01) + ssu100_update_msr(port, packet[3]); + + len -= 4; + ch = packet + 4; + } else + ch = packet; + + if (!len) + return; /* status only */ + + if (port->port.console && port->sysrq) { + for (i = 0; i < len; i++, ch++) { + if (!usb_serial_handle_sysrq_char(port, *ch)) + tty_insert_flip_char(&port->port, *ch, flag); + } + } else + tty_insert_flip_string_fixed_flag(&port->port, ch, flag, len); + + tty_flip_buffer_push(&port->port); +} + +static struct usb_serial_driver ssu100_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ssu100", + }, + .description = DRIVER_DESC, + .id_table = id_table, + .num_ports = 1, + .open = ssu100_open, + .attach = ssu100_attach, + .port_probe = ssu100_port_probe, + .port_remove = ssu100_port_remove, + .dtr_rts = ssu100_dtr_rts, + .process_read_urb = ssu100_process_read_urb, + .tiocmget = ssu100_tiocmget, + .tiocmset = ssu100_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, + .ioctl = ssu100_ioctl, + .set_termios = ssu100_set_termios, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &ssu100_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/symbolserial.c b/kernel/drivers/usb/serial/symbolserial.c new file mode 100644 index 000000000..8fceec729 --- /dev/null +++ b/kernel/drivers/usb/serial/symbolserial.c @@ -0,0 +1,209 @@ +/* + * Symbol USB barcode to serial driver + * + * Copyright (C) 2013 Johan Hovold <jhovold@gmail.com> + * Copyright (C) 2009 Greg Kroah-Hartman <gregkh@suse.de> + * Copyright (C) 2009 Novell Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/tty.h> +#include <linux/slab.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/uaccess.h> + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(0x05e0, 0x0600) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +struct symbol_private { + spinlock_t lock; /* protects the following flags */ + bool throttled; + bool actually_throttled; +}; + +static void symbol_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct symbol_private *priv = usb_get_serial_port_data(port); + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + int result; + int data_length; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", + __func__, status); + goto exit; + } + + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); + + if (urb->actual_length > 1) { + data_length = urb->actual_length - 1; + + /* + * Data from the device comes with a 1 byte header: + * + * <size of data>data... + * This is real data to be sent to the tty layer + * we pretty much just ignore the size and send everything + * else to the tty layer. + */ + tty_insert_flip_string(&port->port, &data[1], data_length); + tty_flip_buffer_push(&port->port); + } else { + dev_dbg(&port->dev, "%s - short packet\n", __func__); + } + +exit: + spin_lock(&priv->lock); + + /* Continue trying to always read if we should */ + if (!priv->throttled) { + result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); + if (result) + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, result); + } else + priv->actually_throttled = true; + spin_unlock(&priv->lock); +} + +static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct symbol_private *priv = usb_get_serial_data(port->serial); + unsigned long flags; + int result = 0; + + spin_lock_irqsave(&priv->lock, flags); + priv->throttled = false; + priv->actually_throttled = false; + spin_unlock_irqrestore(&priv->lock, flags); + + /* Start reading from the device */ + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result) + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, result); + return result; +} + +static void symbol_close(struct usb_serial_port *port) +{ + usb_kill_urb(port->interrupt_in_urb); +} + +static void symbol_throttle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct symbol_private *priv = usb_get_serial_data(port->serial); + + spin_lock_irq(&priv->lock); + priv->throttled = true; + spin_unlock_irq(&priv->lock); +} + +static void symbol_unthrottle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct symbol_private *priv = usb_get_serial_data(port->serial); + int result; + bool was_throttled; + + spin_lock_irq(&priv->lock); + priv->throttled = false; + was_throttled = priv->actually_throttled; + priv->actually_throttled = false; + spin_unlock_irq(&priv->lock); + + if (was_throttled) { + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result) + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __func__, result); + } +} + +static int symbol_startup(struct usb_serial *serial) +{ + if (!serial->num_interrupt_in) { + dev_err(&serial->dev->dev, "no interrupt-in endpoint\n"); + return -ENODEV; + } + + return 0; +} + +static int symbol_port_probe(struct usb_serial_port *port) +{ + struct symbol_private *priv; + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + + usb_set_serial_port_data(port, priv); + + return 0; +} + +static int symbol_port_remove(struct usb_serial_port *port) +{ + struct symbol_private *priv = usb_get_serial_port_data(port); + + kfree(priv); + + return 0; +} + +static struct usb_serial_driver symbol_device = { + .driver = { + .owner = THIS_MODULE, + .name = "symbol", + }, + .id_table = id_table, + .num_ports = 1, + .attach = symbol_startup, + .port_probe = symbol_port_probe, + .port_remove = symbol_port_remove, + .open = symbol_open, + .close = symbol_close, + .throttle = symbol_throttle, + .unthrottle = symbol_unthrottle, + .read_int_callback = symbol_int_callback, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &symbol_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/ti_usb_3410_5052.c b/kernel/drivers/usb/serial/ti_usb_3410_5052.c new file mode 100644 index 000000000..e9da41d9f --- /dev/null +++ b/kernel/drivers/usb/serial/ti_usb_3410_5052.c @@ -0,0 +1,1518 @@ +/* vi: ts=8 sw=8 + * + * TI 3410/5052 USB Serial Driver + * + * Copyright (C) 2004 Texas Instruments + * + * This driver is based on the Linux io_ti driver, which is + * Copyright (C) 2000-2002 Inside Out Networks + * Copyright (C) 2001-2002 Greg Kroah-Hartman + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * For questions or problems with this driver, contact Texas Instruments + * technical support, or Al Borchers <alborchers@steinerpoint.com>, or + * Peter Berger <pberger@brimson.com>. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/firmware.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/ioctl.h> +#include <linux/serial.h> +#include <linux/kfifo.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +#include "ti_usb_3410_5052.h" + +/* Defines */ + +#define TI_DRIVER_AUTHOR "Al Borchers <alborchers@steinerpoint.com>" +#define TI_DRIVER_DESC "TI USB 3410/5052 Serial Driver" + +#define TI_FIRMWARE_BUF_SIZE 16284 + +#define TI_TRANSFER_TIMEOUT 2 + +#define TI_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */ + +/* supported setserial flags */ +#define TI_SET_SERIAL_FLAGS 0 + +/* read urb states */ +#define TI_READ_URB_RUNNING 0 +#define TI_READ_URB_STOPPING 1 +#define TI_READ_URB_STOPPED 2 + +#define TI_EXTRA_VID_PID_COUNT 5 + + +/* Structures */ + +struct ti_port { + int tp_is_open; + __u8 tp_msr; + __u8 tp_shadow_mcr; + __u8 tp_uart_mode; /* 232 or 485 modes */ + unsigned int tp_uart_base_addr; + int tp_flags; + struct ti_device *tp_tdev; + struct usb_serial_port *tp_port; + spinlock_t tp_lock; + int tp_read_urb_state; + int tp_write_urb_in_use; +}; + +struct ti_device { + struct mutex td_open_close_lock; + int td_open_port_count; + struct usb_serial *td_serial; + int td_is_3410; + int td_urb_error; +}; + + +/* Function Declarations */ + +static int ti_startup(struct usb_serial *serial); +static void ti_release(struct usb_serial *serial); +static int ti_port_probe(struct usb_serial_port *port); +static int ti_port_remove(struct usb_serial_port *port); +static int ti_open(struct tty_struct *tty, struct usb_serial_port *port); +static void ti_close(struct usb_serial_port *port); +static int ti_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *data, int count); +static int ti_write_room(struct tty_struct *tty); +static int ti_chars_in_buffer(struct tty_struct *tty); +static bool ti_tx_empty(struct usb_serial_port *port); +static void ti_throttle(struct tty_struct *tty); +static void ti_unthrottle(struct tty_struct *tty); +static int ti_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg); +static void ti_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios); +static int ti_tiocmget(struct tty_struct *tty); +static int ti_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +static void ti_break(struct tty_struct *tty, int break_state); +static void ti_interrupt_callback(struct urb *urb); +static void ti_bulk_in_callback(struct urb *urb); +static void ti_bulk_out_callback(struct urb *urb); + +static void ti_recv(struct usb_serial_port *port, unsigned char *data, + int length); +static void ti_send(struct ti_port *tport); +static int ti_set_mcr(struct ti_port *tport, unsigned int mcr); +static int ti_get_lsr(struct ti_port *tport, u8 *lsr); +static int ti_get_serial_info(struct ti_port *tport, + struct serial_struct __user *ret_arg); +static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport, + struct serial_struct __user *new_arg); +static void ti_handle_new_msr(struct ti_port *tport, __u8 msr); + +static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty); +static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty); + +static int ti_command_out_sync(struct ti_device *tdev, __u8 command, + __u16 moduleid, __u16 value, __u8 *data, int size); +static int ti_command_in_sync(struct ti_device *tdev, __u8 command, + __u16 moduleid, __u16 value, __u8 *data, int size); + +static int ti_write_byte(struct usb_serial_port *port, struct ti_device *tdev, + unsigned long addr, __u8 mask, __u8 byte); + +static int ti_download_firmware(struct ti_device *tdev); + + +/* Data */ + +/* module parameters */ +static int closing_wait = TI_DEFAULT_CLOSING_WAIT; + +/* supported devices */ +static const struct usb_device_id ti_id_table_3410[] = { + { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, + { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, + { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) }, + { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) }, + { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) }, + { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) }, + { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) }, + { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) }, + { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) }, + { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STEREO_PLUG_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) }, + { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) }, + { } /* terminator */ +}; + +static const struct usb_device_id ti_id_table_5052[] = { + { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) }, + { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, + { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, + { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, + { } /* terminator */ +}; + +static const struct usb_device_id ti_id_table_combined[] = { + { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, + { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, + { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) }, + { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) }, + { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) }, + { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) }, + { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) }, + { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234MU_PRODUCT_ID) }, + { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBA_PRODUCT_ID) }, + { USB_DEVICE(MTS_VENDOR_ID, MTS_MT9234ZBAOLD_PRODUCT_ID) }, + { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) }, + { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, + { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, + { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) }, + { USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_STRIP_PORT_ID) }, + { USB_DEVICE(TI_VENDOR_ID, FRI2_PRODUCT_ID) }, + { } /* terminator */ +}; + +static struct usb_serial_driver ti_1port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ti_usb_3410_5052_1", + }, + .description = "TI USB 3410 1 port adapter", + .id_table = ti_id_table_3410, + .num_ports = 1, + .attach = ti_startup, + .release = ti_release, + .port_probe = ti_port_probe, + .port_remove = ti_port_remove, + .open = ti_open, + .close = ti_close, + .write = ti_write, + .write_room = ti_write_room, + .chars_in_buffer = ti_chars_in_buffer, + .tx_empty = ti_tx_empty, + .throttle = ti_throttle, + .unthrottle = ti_unthrottle, + .ioctl = ti_ioctl, + .set_termios = ti_set_termios, + .tiocmget = ti_tiocmget, + .tiocmset = ti_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, + .break_ctl = ti_break, + .read_int_callback = ti_interrupt_callback, + .read_bulk_callback = ti_bulk_in_callback, + .write_bulk_callback = ti_bulk_out_callback, +}; + +static struct usb_serial_driver ti_2port_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ti_usb_3410_5052_2", + }, + .description = "TI USB 5052 2 port adapter", + .id_table = ti_id_table_5052, + .num_ports = 2, + .attach = ti_startup, + .release = ti_release, + .port_probe = ti_port_probe, + .port_remove = ti_port_remove, + .open = ti_open, + .close = ti_close, + .write = ti_write, + .write_room = ti_write_room, + .chars_in_buffer = ti_chars_in_buffer, + .tx_empty = ti_tx_empty, + .throttle = ti_throttle, + .unthrottle = ti_unthrottle, + .ioctl = ti_ioctl, + .set_termios = ti_set_termios, + .tiocmget = ti_tiocmget, + .tiocmset = ti_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, + .break_ctl = ti_break, + .read_int_callback = ti_interrupt_callback, + .read_bulk_callback = ti_bulk_in_callback, + .write_bulk_callback = ti_bulk_out_callback, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &ti_1port_device, &ti_2port_device, NULL +}; + +/* Module */ + +MODULE_AUTHOR(TI_DRIVER_AUTHOR); +MODULE_DESCRIPTION(TI_DRIVER_DESC); +MODULE_LICENSE("GPL"); + +MODULE_FIRMWARE("ti_3410.fw"); +MODULE_FIRMWARE("ti_5052.fw"); +MODULE_FIRMWARE("mts_cdma.fw"); +MODULE_FIRMWARE("mts_gsm.fw"); +MODULE_FIRMWARE("mts_edge.fw"); +MODULE_FIRMWARE("mts_mt9234mu.fw"); +MODULE_FIRMWARE("mts_mt9234zba.fw"); + +module_param(closing_wait, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(closing_wait, + "Maximum wait for data to drain in close, in .01 secs, default is 4000"); + +MODULE_DEVICE_TABLE(usb, ti_id_table_combined); + +module_usb_serial_driver(serial_drivers, ti_id_table_combined); + +/* Functions */ + +static int ti_startup(struct usb_serial *serial) +{ + struct ti_device *tdev; + struct usb_device *dev = serial->dev; + int status; + + dev_dbg(&dev->dev, + "%s - product 0x%4X, num configurations %d, configuration value %d\n", + __func__, le16_to_cpu(dev->descriptor.idProduct), + dev->descriptor.bNumConfigurations, + dev->actconfig->desc.bConfigurationValue); + + /* create device structure */ + tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL); + if (!tdev) + return -ENOMEM; + + mutex_init(&tdev->td_open_close_lock); + tdev->td_serial = serial; + usb_set_serial_data(serial, tdev); + + /* determine device type */ + if (serial->type == &ti_1port_device) + tdev->td_is_3410 = 1; + dev_dbg(&dev->dev, "%s - device type is %s\n", __func__, + tdev->td_is_3410 ? "3410" : "5052"); + + /* if we have only 1 configuration, download firmware */ + if (dev->descriptor.bNumConfigurations == 1) { + status = ti_download_firmware(tdev); + + if (status != 0) + goto free_tdev; + + /* 3410 must be reset, 5052 resets itself */ + if (tdev->td_is_3410) { + msleep_interruptible(100); + usb_reset_device(dev); + } + + status = -ENODEV; + goto free_tdev; + } + + /* the second configuration must be set */ + if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) { + status = usb_driver_set_configuration(dev, TI_ACTIVE_CONFIG); + status = status ? status : -ENODEV; + goto free_tdev; + } + + return 0; + +free_tdev: + kfree(tdev); + usb_set_serial_data(serial, NULL); + return status; +} + + +static void ti_release(struct usb_serial *serial) +{ + struct ti_device *tdev = usb_get_serial_data(serial); + + kfree(tdev); +} + +static int ti_port_probe(struct usb_serial_port *port) +{ + struct ti_port *tport; + + tport = kzalloc(sizeof(*tport), GFP_KERNEL); + if (!tport) + return -ENOMEM; + + spin_lock_init(&tport->tp_lock); + if (port == port->serial->port[0]) + tport->tp_uart_base_addr = TI_UART1_BASE_ADDR; + else + tport->tp_uart_base_addr = TI_UART2_BASE_ADDR; + port->port.closing_wait = msecs_to_jiffies(10 * closing_wait); + tport->tp_port = port; + tport->tp_tdev = usb_get_serial_data(port->serial); + tport->tp_uart_mode = 0; /* default is RS232 */ + + usb_set_serial_port_data(port, tport); + + port->port.drain_delay = 3; + + return 0; +} + +static int ti_port_remove(struct usb_serial_port *port) +{ + struct ti_port *tport; + + tport = usb_get_serial_port_data(port); + kfree(tport); + + return 0; +} + +static int ti_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct ti_port *tport = usb_get_serial_port_data(port); + struct ti_device *tdev; + struct usb_device *dev; + struct urb *urb; + int port_number; + int status; + __u16 open_settings = (__u8)(TI_PIPE_MODE_CONTINOUS | + TI_PIPE_TIMEOUT_ENABLE | + (TI_TRANSFER_TIMEOUT << 2)); + + if (tport == NULL) + return -ENODEV; + + dev = port->serial->dev; + tdev = tport->tp_tdev; + + /* only one open on any port on a device at a time */ + if (mutex_lock_interruptible(&tdev->td_open_close_lock)) + return -ERESTARTSYS; + + port_number = port->port_number; + + tport->tp_msr = 0; + tport->tp_shadow_mcr |= (TI_MCR_RTS | TI_MCR_DTR); + + /* start interrupt urb the first time a port is opened on this device */ + if (tdev->td_open_port_count == 0) { + dev_dbg(&port->dev, "%s - start interrupt in urb\n", __func__); + urb = tdev->td_serial->port[0]->interrupt_in_urb; + if (!urb) { + dev_err(&port->dev, "%s - no interrupt urb\n", __func__); + status = -EINVAL; + goto release_lock; + } + urb->context = tdev; + status = usb_submit_urb(urb, GFP_KERNEL); + if (status) { + dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __func__, status); + goto release_lock; + } + } + + if (tty) + ti_set_termios(tty, port, &tty->termios); + + dev_dbg(&port->dev, "%s - sending TI_OPEN_PORT\n", __func__); + status = ti_command_out_sync(tdev, TI_OPEN_PORT, + (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0); + if (status) { + dev_err(&port->dev, "%s - cannot send open command, %d\n", + __func__, status); + goto unlink_int_urb; + } + + dev_dbg(&port->dev, "%s - sending TI_START_PORT\n", __func__); + status = ti_command_out_sync(tdev, TI_START_PORT, + (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); + if (status) { + dev_err(&port->dev, "%s - cannot send start command, %d\n", + __func__, status); + goto unlink_int_urb; + } + + dev_dbg(&port->dev, "%s - sending TI_PURGE_PORT\n", __func__); + status = ti_command_out_sync(tdev, TI_PURGE_PORT, + (__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0); + if (status) { + dev_err(&port->dev, "%s - cannot clear input buffers, %d\n", + __func__, status); + goto unlink_int_urb; + } + status = ti_command_out_sync(tdev, TI_PURGE_PORT, + (__u8)(TI_UART1_PORT + port_number), TI_PURGE_OUTPUT, NULL, 0); + if (status) { + dev_err(&port->dev, "%s - cannot clear output buffers, %d\n", + __func__, status); + goto unlink_int_urb; + } + + /* reset the data toggle on the bulk endpoints to work around bug in + * host controllers where things get out of sync some times */ + usb_clear_halt(dev, port->write_urb->pipe); + usb_clear_halt(dev, port->read_urb->pipe); + + if (tty) + ti_set_termios(tty, port, &tty->termios); + + dev_dbg(&port->dev, "%s - sending TI_OPEN_PORT (2)\n", __func__); + status = ti_command_out_sync(tdev, TI_OPEN_PORT, + (__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0); + if (status) { + dev_err(&port->dev, "%s - cannot send open command (2), %d\n", + __func__, status); + goto unlink_int_urb; + } + + dev_dbg(&port->dev, "%s - sending TI_START_PORT (2)\n", __func__); + status = ti_command_out_sync(tdev, TI_START_PORT, + (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); + if (status) { + dev_err(&port->dev, "%s - cannot send start command (2), %d\n", + __func__, status); + goto unlink_int_urb; + } + + /* start read urb */ + dev_dbg(&port->dev, "%s - start read urb\n", __func__); + urb = port->read_urb; + if (!urb) { + dev_err(&port->dev, "%s - no read urb\n", __func__); + status = -EINVAL; + goto unlink_int_urb; + } + tport->tp_read_urb_state = TI_READ_URB_RUNNING; + urb->context = tport; + status = usb_submit_urb(urb, GFP_KERNEL); + if (status) { + dev_err(&port->dev, "%s - submit read urb failed, %d\n", + __func__, status); + goto unlink_int_urb; + } + + tport->tp_is_open = 1; + ++tdev->td_open_port_count; + + goto release_lock; + +unlink_int_urb: + if (tdev->td_open_port_count == 0) + usb_kill_urb(port->serial->port[0]->interrupt_in_urb); +release_lock: + mutex_unlock(&tdev->td_open_close_lock); + dev_dbg(&port->dev, "%s - exit %d\n", __func__, status); + return status; +} + + +static void ti_close(struct usb_serial_port *port) +{ + struct ti_device *tdev; + struct ti_port *tport; + int port_number; + int status; + int do_unlock; + unsigned long flags; + + tdev = usb_get_serial_data(port->serial); + tport = usb_get_serial_port_data(port); + if (tdev == NULL || tport == NULL) + return; + + tport->tp_is_open = 0; + + usb_kill_urb(port->read_urb); + usb_kill_urb(port->write_urb); + tport->tp_write_urb_in_use = 0; + spin_lock_irqsave(&tport->tp_lock, flags); + kfifo_reset_out(&port->write_fifo); + spin_unlock_irqrestore(&tport->tp_lock, flags); + + port_number = port->port_number; + + dev_dbg(&port->dev, "%s - sending TI_CLOSE_PORT\n", __func__); + status = ti_command_out_sync(tdev, TI_CLOSE_PORT, + (__u8)(TI_UART1_PORT + port_number), 0, NULL, 0); + if (status) + dev_err(&port->dev, + "%s - cannot send close port command, %d\n" + , __func__, status); + + /* if mutex_lock is interrupted, continue anyway */ + do_unlock = !mutex_lock_interruptible(&tdev->td_open_close_lock); + --tport->tp_tdev->td_open_port_count; + if (tport->tp_tdev->td_open_port_count <= 0) { + /* last port is closed, shut down interrupt urb */ + usb_kill_urb(port->serial->port[0]->interrupt_in_urb); + tport->tp_tdev->td_open_port_count = 0; + } + if (do_unlock) + mutex_unlock(&tdev->td_open_close_lock); +} + + +static int ti_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *data, int count) +{ + struct ti_port *tport = usb_get_serial_port_data(port); + + if (count == 0) { + dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__); + return 0; + } + + if (tport == NULL || !tport->tp_is_open) + return -ENODEV; + + count = kfifo_in_locked(&port->write_fifo, data, count, + &tport->tp_lock); + ti_send(tport); + + return count; +} + + +static int ti_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct ti_port *tport = usb_get_serial_port_data(port); + int room = 0; + unsigned long flags; + + if (tport == NULL) + return 0; + + spin_lock_irqsave(&tport->tp_lock, flags); + room = kfifo_avail(&port->write_fifo); + spin_unlock_irqrestore(&tport->tp_lock, flags); + + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); + return room; +} + + +static int ti_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct ti_port *tport = usb_get_serial_port_data(port); + int chars = 0; + unsigned long flags; + + if (tport == NULL) + return 0; + + spin_lock_irqsave(&tport->tp_lock, flags); + chars = kfifo_len(&port->write_fifo); + spin_unlock_irqrestore(&tport->tp_lock, flags); + + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); + return chars; +} + +static bool ti_tx_empty(struct usb_serial_port *port) +{ + struct ti_port *tport = usb_get_serial_port_data(port); + int ret; + u8 lsr; + + ret = ti_get_lsr(tport, &lsr); + if (!ret && !(lsr & TI_LSR_TX_EMPTY)) + return false; + + return true; +} + +static void ti_throttle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct ti_port *tport = usb_get_serial_port_data(port); + + if (tport == NULL) + return; + + if (I_IXOFF(tty) || C_CRTSCTS(tty)) + ti_stop_read(tport, tty); + +} + + +static void ti_unthrottle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct ti_port *tport = usb_get_serial_port_data(port); + int status; + + if (tport == NULL) + return; + + if (I_IXOFF(tty) || C_CRTSCTS(tty)) { + status = ti_restart_read(tport, tty); + if (status) + dev_err(&port->dev, "%s - cannot restart read, %d\n", + __func__, status); + } +} + +static int ti_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + struct ti_port *tport = usb_get_serial_port_data(port); + + if (tport == NULL) + return -ENODEV; + + switch (cmd) { + case TIOCGSERIAL: + dev_dbg(&port->dev, "%s - TIOCGSERIAL\n", __func__); + return ti_get_serial_info(tport, + (struct serial_struct __user *)arg); + case TIOCSSERIAL: + dev_dbg(&port->dev, "%s - TIOCSSERIAL\n", __func__); + return ti_set_serial_info(tty, tport, + (struct serial_struct __user *)arg); + } + return -ENOIOCTLCMD; +} + + +static void ti_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + struct ti_port *tport = usb_get_serial_port_data(port); + struct ti_uart_config *config; + tcflag_t cflag, iflag; + int baud; + int status; + int port_number = port->port_number; + unsigned int mcr; + + cflag = tty->termios.c_cflag; + iflag = tty->termios.c_iflag; + + dev_dbg(&port->dev, "%s - cflag %08x, iflag %08x\n", __func__, cflag, iflag); + dev_dbg(&port->dev, "%s - old clfag %08x, old iflag %08x\n", __func__, + old_termios->c_cflag, old_termios->c_iflag); + + if (tport == NULL) + return; + + config = kmalloc(sizeof(*config), GFP_KERNEL); + if (!config) + return; + + config->wFlags = 0; + + /* these flags must be set */ + config->wFlags |= TI_UART_ENABLE_MS_INTS; + config->wFlags |= TI_UART_ENABLE_AUTO_START_DMA; + config->bUartMode = (__u8)(tport->tp_uart_mode); + + switch (cflag & CSIZE) { + case CS5: + config->bDataBits = TI_UART_5_DATA_BITS; + break; + case CS6: + config->bDataBits = TI_UART_6_DATA_BITS; + break; + case CS7: + config->bDataBits = TI_UART_7_DATA_BITS; + break; + default: + case CS8: + config->bDataBits = TI_UART_8_DATA_BITS; + break; + } + + /* CMSPAR isn't supported by this driver */ + tty->termios.c_cflag &= ~CMSPAR; + + if (cflag & PARENB) { + if (cflag & PARODD) { + config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING; + config->bParity = TI_UART_ODD_PARITY; + } else { + config->wFlags |= TI_UART_ENABLE_PARITY_CHECKING; + config->bParity = TI_UART_EVEN_PARITY; + } + } else { + config->wFlags &= ~TI_UART_ENABLE_PARITY_CHECKING; + config->bParity = TI_UART_NO_PARITY; + } + + if (cflag & CSTOPB) + config->bStopBits = TI_UART_2_STOP_BITS; + else + config->bStopBits = TI_UART_1_STOP_BITS; + + if (cflag & CRTSCTS) { + /* RTS flow control must be off to drop RTS for baud rate B0 */ + if ((cflag & CBAUD) != B0) + config->wFlags |= TI_UART_ENABLE_RTS_IN; + config->wFlags |= TI_UART_ENABLE_CTS_OUT; + } else { + ti_restart_read(tport, tty); + } + + if (I_IXOFF(tty) || I_IXON(tty)) { + config->cXon = START_CHAR(tty); + config->cXoff = STOP_CHAR(tty); + + if (I_IXOFF(tty)) + config->wFlags |= TI_UART_ENABLE_X_IN; + else + ti_restart_read(tport, tty); + + if (I_IXON(tty)) + config->wFlags |= TI_UART_ENABLE_X_OUT; + } + + baud = tty_get_baud_rate(tty); + if (!baud) + baud = 9600; + if (tport->tp_tdev->td_is_3410) + config->wBaudRate = (__u16)((923077 + baud/2) / baud); + else + config->wBaudRate = (__u16)((461538 + baud/2) / baud); + + /* FIXME: Should calculate resulting baud here and report it back */ + if ((cflag & CBAUD) != B0) + tty_encode_baud_rate(tty, baud, baud); + + dev_dbg(&port->dev, + "%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d\n", + __func__, baud, config->wBaudRate, config->wFlags, + config->bDataBits, config->bParity, config->bStopBits, + config->cXon, config->cXoff, config->bUartMode); + + cpu_to_be16s(&config->wBaudRate); + cpu_to_be16s(&config->wFlags); + + status = ti_command_out_sync(tport->tp_tdev, TI_SET_CONFIG, + (__u8)(TI_UART1_PORT + port_number), 0, (__u8 *)config, + sizeof(*config)); + if (status) + dev_err(&port->dev, "%s - cannot set config on port %d, %d\n", + __func__, port_number, status); + + /* SET_CONFIG asserts RTS and DTR, reset them correctly */ + mcr = tport->tp_shadow_mcr; + /* if baud rate is B0, clear RTS and DTR */ + if ((cflag & CBAUD) == B0) + mcr &= ~(TI_MCR_DTR | TI_MCR_RTS); + status = ti_set_mcr(tport, mcr); + if (status) + dev_err(&port->dev, + "%s - cannot set modem control on port %d, %d\n", + __func__, port_number, status); + + kfree(config); +} + + +static int ti_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct ti_port *tport = usb_get_serial_port_data(port); + unsigned int result; + unsigned int msr; + unsigned int mcr; + unsigned long flags; + + if (tport == NULL) + return -ENODEV; + + spin_lock_irqsave(&tport->tp_lock, flags); + msr = tport->tp_msr; + mcr = tport->tp_shadow_mcr; + spin_unlock_irqrestore(&tport->tp_lock, flags); + + result = ((mcr & TI_MCR_DTR) ? TIOCM_DTR : 0) + | ((mcr & TI_MCR_RTS) ? TIOCM_RTS : 0) + | ((mcr & TI_MCR_LOOP) ? TIOCM_LOOP : 0) + | ((msr & TI_MSR_CTS) ? TIOCM_CTS : 0) + | ((msr & TI_MSR_CD) ? TIOCM_CAR : 0) + | ((msr & TI_MSR_RI) ? TIOCM_RI : 0) + | ((msr & TI_MSR_DSR) ? TIOCM_DSR : 0); + + dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result); + + return result; +} + + +static int ti_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct ti_port *tport = usb_get_serial_port_data(port); + unsigned int mcr; + unsigned long flags; + + if (tport == NULL) + return -ENODEV; + + spin_lock_irqsave(&tport->tp_lock, flags); + mcr = tport->tp_shadow_mcr; + + if (set & TIOCM_RTS) + mcr |= TI_MCR_RTS; + if (set & TIOCM_DTR) + mcr |= TI_MCR_DTR; + if (set & TIOCM_LOOP) + mcr |= TI_MCR_LOOP; + + if (clear & TIOCM_RTS) + mcr &= ~TI_MCR_RTS; + if (clear & TIOCM_DTR) + mcr &= ~TI_MCR_DTR; + if (clear & TIOCM_LOOP) + mcr &= ~TI_MCR_LOOP; + spin_unlock_irqrestore(&tport->tp_lock, flags); + + return ti_set_mcr(tport, mcr); +} + + +static void ti_break(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + struct ti_port *tport = usb_get_serial_port_data(port); + int status; + + dev_dbg(&port->dev, "%s - state = %d\n", __func__, break_state); + + if (tport == NULL) + return; + + status = ti_write_byte(port, tport->tp_tdev, + tport->tp_uart_base_addr + TI_UART_OFFSET_LCR, + TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0); + + if (status) + dev_dbg(&port->dev, "%s - error setting break, %d\n", __func__, status); +} + + +static void ti_interrupt_callback(struct urb *urb) +{ + struct ti_device *tdev = urb->context; + struct usb_serial_port *port; + struct usb_serial *serial = tdev->td_serial; + struct ti_port *tport; + struct device *dev = &urb->dev->dev; + unsigned char *data = urb->transfer_buffer; + int length = urb->actual_length; + int port_number; + int function; + int status = urb->status; + int retval; + __u8 msr; + + switch (status) { + case 0: + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status); + tdev->td_urb_error = 1; + return; + default: + dev_err(dev, "%s - nonzero urb status, %d\n", __func__, status); + tdev->td_urb_error = 1; + goto exit; + } + + if (length != 2) { + dev_dbg(dev, "%s - bad packet size, %d\n", __func__, length); + goto exit; + } + + if (data[0] == TI_CODE_HARDWARE_ERROR) { + dev_err(dev, "%s - hardware error, %d\n", __func__, data[1]); + goto exit; + } + + port_number = TI_GET_PORT_FROM_CODE(data[0]); + function = TI_GET_FUNC_FROM_CODE(data[0]); + + dev_dbg(dev, "%s - port_number %d, function %d, data 0x%02X\n", + __func__, port_number, function, data[1]); + + if (port_number >= serial->num_ports) { + dev_err(dev, "%s - bad port number, %d\n", + __func__, port_number); + goto exit; + } + + port = serial->port[port_number]; + + tport = usb_get_serial_port_data(port); + if (!tport) + goto exit; + + switch (function) { + case TI_CODE_DATA_ERROR: + dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n", + __func__, port_number, data[1]); + break; + + case TI_CODE_MODEM_STATUS: + msr = data[1]; + dev_dbg(dev, "%s - port %d, msr 0x%02X\n", __func__, port_number, msr); + ti_handle_new_msr(tport, msr); + break; + + default: + dev_err(dev, "%s - unknown interrupt code, 0x%02X\n", + __func__, data[1]); + break; + } + +exit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) + dev_err(dev, "%s - resubmit interrupt urb failed, %d\n", + __func__, retval); +} + + +static void ti_bulk_in_callback(struct urb *urb) +{ + struct ti_port *tport = urb->context; + struct usb_serial_port *port = tport->tp_port; + struct device *dev = &urb->dev->dev; + int status = urb->status; + int retval = 0; + + switch (status) { + case 0: + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + dev_dbg(dev, "%s - urb shutting down, %d\n", __func__, status); + tport->tp_tdev->td_urb_error = 1; + return; + default: + dev_err(dev, "%s - nonzero urb status, %d\n", + __func__, status); + tport->tp_tdev->td_urb_error = 1; + } + + if (status == -EPIPE) + goto exit; + + if (status) { + dev_err(dev, "%s - stopping read!\n", __func__); + return; + } + + if (urb->actual_length) { + usb_serial_debug_data(dev, __func__, urb->actual_length, + urb->transfer_buffer); + + if (!tport->tp_is_open) + dev_dbg(dev, "%s - port closed, dropping data\n", + __func__); + else + ti_recv(port, urb->transfer_buffer, urb->actual_length); + spin_lock(&tport->tp_lock); + port->icount.rx += urb->actual_length; + spin_unlock(&tport->tp_lock); + } + +exit: + /* continue to read unless stopping */ + spin_lock(&tport->tp_lock); + if (tport->tp_read_urb_state == TI_READ_URB_RUNNING) + retval = usb_submit_urb(urb, GFP_ATOMIC); + else if (tport->tp_read_urb_state == TI_READ_URB_STOPPING) + tport->tp_read_urb_state = TI_READ_URB_STOPPED; + + spin_unlock(&tport->tp_lock); + if (retval) + dev_err(dev, "%s - resubmit read urb failed, %d\n", + __func__, retval); +} + + +static void ti_bulk_out_callback(struct urb *urb) +{ + struct ti_port *tport = urb->context; + struct usb_serial_port *port = tport->tp_port; + int status = urb->status; + + tport->tp_write_urb_in_use = 0; + + switch (status) { + case 0: + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + dev_dbg(&port->dev, "%s - urb shutting down, %d\n", __func__, status); + tport->tp_tdev->td_urb_error = 1; + return; + default: + dev_err_console(port, "%s - nonzero urb status, %d\n", + __func__, status); + tport->tp_tdev->td_urb_error = 1; + } + + /* send any buffered data */ + ti_send(tport); +} + + +static void ti_recv(struct usb_serial_port *port, unsigned char *data, + int length) +{ + int cnt; + + do { + cnt = tty_insert_flip_string(&port->port, data, length); + if (cnt < length) { + dev_err(&port->dev, "%s - dropping data, %d bytes lost\n", + __func__, length - cnt); + if (cnt == 0) + break; + } + tty_flip_buffer_push(&port->port); + data += cnt; + length -= cnt; + } while (length > 0); +} + + +static void ti_send(struct ti_port *tport) +{ + int count, result; + struct usb_serial_port *port = tport->tp_port; + unsigned long flags; + + spin_lock_irqsave(&tport->tp_lock, flags); + + if (tport->tp_write_urb_in_use) + goto unlock; + + count = kfifo_out(&port->write_fifo, + port->write_urb->transfer_buffer, + port->bulk_out_size); + + if (count == 0) + goto unlock; + + tport->tp_write_urb_in_use = 1; + + spin_unlock_irqrestore(&tport->tp_lock, flags); + + usb_serial_debug_data(&port->dev, __func__, count, + port->write_urb->transfer_buffer); + + usb_fill_bulk_urb(port->write_urb, port->serial->dev, + usb_sndbulkpipe(port->serial->dev, + port->bulk_out_endpointAddress), + port->write_urb->transfer_buffer, count, + ti_bulk_out_callback, tport); + + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (result) { + dev_err_console(port, "%s - submit write urb failed, %d\n", + __func__, result); + tport->tp_write_urb_in_use = 0; + /* TODO: reschedule ti_send */ + } else { + spin_lock_irqsave(&tport->tp_lock, flags); + port->icount.tx += count; + spin_unlock_irqrestore(&tport->tp_lock, flags); + } + + /* more room in the buffer for new writes, wakeup */ + tty_port_tty_wakeup(&port->port); + + return; +unlock: + spin_unlock_irqrestore(&tport->tp_lock, flags); + return; +} + + +static int ti_set_mcr(struct ti_port *tport, unsigned int mcr) +{ + unsigned long flags; + int status; + + status = ti_write_byte(tport->tp_port, tport->tp_tdev, + tport->tp_uart_base_addr + TI_UART_OFFSET_MCR, + TI_MCR_RTS | TI_MCR_DTR | TI_MCR_LOOP, mcr); + + spin_lock_irqsave(&tport->tp_lock, flags); + if (!status) + tport->tp_shadow_mcr = mcr; + spin_unlock_irqrestore(&tport->tp_lock, flags); + + return status; +} + + +static int ti_get_lsr(struct ti_port *tport, u8 *lsr) +{ + int size, status; + struct ti_device *tdev = tport->tp_tdev; + struct usb_serial_port *port = tport->tp_port; + int port_number = port->port_number; + struct ti_port_status *data; + + size = sizeof(struct ti_port_status); + data = kmalloc(size, GFP_KERNEL); + if (!data) + return -ENOMEM; + + status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS, + (__u8)(TI_UART1_PORT+port_number), 0, (__u8 *)data, size); + if (status) { + dev_err(&port->dev, + "%s - get port status command failed, %d\n", + __func__, status); + goto free_data; + } + + dev_dbg(&port->dev, "%s - lsr 0x%02X\n", __func__, data->bLSR); + + *lsr = data->bLSR; + +free_data: + kfree(data); + return status; +} + + +static int ti_get_serial_info(struct ti_port *tport, + struct serial_struct __user *ret_arg) +{ + struct usb_serial_port *port = tport->tp_port; + struct serial_struct ret_serial; + unsigned cwait; + + if (!ret_arg) + return -EFAULT; + + cwait = port->port.closing_wait; + if (cwait != ASYNC_CLOSING_WAIT_NONE) + cwait = jiffies_to_msecs(cwait) / 10; + + memset(&ret_serial, 0, sizeof(ret_serial)); + + ret_serial.type = PORT_16550A; + ret_serial.line = port->minor; + ret_serial.port = port->port_number; + ret_serial.flags = tport->tp_flags; + ret_serial.xmit_fifo_size = kfifo_size(&port->write_fifo); + ret_serial.baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800; + ret_serial.closing_wait = cwait; + + if (copy_to_user(ret_arg, &ret_serial, sizeof(*ret_arg))) + return -EFAULT; + + return 0; +} + + +static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport, + struct serial_struct __user *new_arg) +{ + struct serial_struct new_serial; + unsigned cwait; + + if (copy_from_user(&new_serial, new_arg, sizeof(new_serial))) + return -EFAULT; + + cwait = new_serial.closing_wait; + if (cwait != ASYNC_CLOSING_WAIT_NONE) + cwait = msecs_to_jiffies(10 * new_serial.closing_wait); + + tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS; + tport->tp_port->port.closing_wait = cwait; + + return 0; +} + + +static void ti_handle_new_msr(struct ti_port *tport, __u8 msr) +{ + struct async_icount *icount; + struct tty_struct *tty; + unsigned long flags; + + dev_dbg(&tport->tp_port->dev, "%s - msr 0x%02X\n", __func__, msr); + + if (msr & TI_MSR_DELTA_MASK) { + spin_lock_irqsave(&tport->tp_lock, flags); + icount = &tport->tp_port->icount; + if (msr & TI_MSR_DELTA_CTS) + icount->cts++; + if (msr & TI_MSR_DELTA_DSR) + icount->dsr++; + if (msr & TI_MSR_DELTA_CD) + icount->dcd++; + if (msr & TI_MSR_DELTA_RI) + icount->rng++; + wake_up_interruptible(&tport->tp_port->port.delta_msr_wait); + spin_unlock_irqrestore(&tport->tp_lock, flags); + } + + tport->tp_msr = msr & TI_MSR_MASK; + + /* handle CTS flow control */ + tty = tty_port_tty_get(&tport->tp_port->port); + if (tty && C_CRTSCTS(tty)) { + if (msr & TI_MSR_CTS) + tty_wakeup(tty); + } + tty_kref_put(tty); +} + + +static void ti_stop_read(struct ti_port *tport, struct tty_struct *tty) +{ + unsigned long flags; + + spin_lock_irqsave(&tport->tp_lock, flags); + + if (tport->tp_read_urb_state == TI_READ_URB_RUNNING) + tport->tp_read_urb_state = TI_READ_URB_STOPPING; + + spin_unlock_irqrestore(&tport->tp_lock, flags); +} + + +static int ti_restart_read(struct ti_port *tport, struct tty_struct *tty) +{ + struct urb *urb; + int status = 0; + unsigned long flags; + + spin_lock_irqsave(&tport->tp_lock, flags); + + if (tport->tp_read_urb_state == TI_READ_URB_STOPPED) { + tport->tp_read_urb_state = TI_READ_URB_RUNNING; + urb = tport->tp_port->read_urb; + spin_unlock_irqrestore(&tport->tp_lock, flags); + urb->context = tport; + status = usb_submit_urb(urb, GFP_KERNEL); + } else { + tport->tp_read_urb_state = TI_READ_URB_RUNNING; + spin_unlock_irqrestore(&tport->tp_lock, flags); + } + + return status; +} + + +static int ti_command_out_sync(struct ti_device *tdev, __u8 command, + __u16 moduleid, __u16 value, __u8 *data, int size) +{ + int status; + + status = usb_control_msg(tdev->td_serial->dev, + usb_sndctrlpipe(tdev->td_serial->dev, 0), command, + (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT), + value, moduleid, data, size, 1000); + + if (status == size) + status = 0; + + if (status > 0) + status = -ECOMM; + + return status; +} + + +static int ti_command_in_sync(struct ti_device *tdev, __u8 command, + __u16 moduleid, __u16 value, __u8 *data, int size) +{ + int status; + + status = usb_control_msg(tdev->td_serial->dev, + usb_rcvctrlpipe(tdev->td_serial->dev, 0), command, + (USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN), + value, moduleid, data, size, 1000); + + if (status == size) + status = 0; + + if (status > 0) + status = -ECOMM; + + return status; +} + + +static int ti_write_byte(struct usb_serial_port *port, + struct ti_device *tdev, unsigned long addr, + __u8 mask, __u8 byte) +{ + int status; + unsigned int size; + struct ti_write_data_bytes *data; + + dev_dbg(&port->dev, "%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X\n", __func__, + addr, mask, byte); + + size = sizeof(struct ti_write_data_bytes) + 2; + data = kmalloc(size, GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->bAddrType = TI_RW_DATA_ADDR_XDATA; + data->bDataType = TI_RW_DATA_BYTE; + data->bDataCounter = 1; + data->wBaseAddrHi = cpu_to_be16(addr>>16); + data->wBaseAddrLo = cpu_to_be16(addr); + data->bData[0] = mask; + data->bData[1] = byte; + + status = ti_command_out_sync(tdev, TI_WRITE_DATA, TI_RAM_PORT, 0, + (__u8 *)data, size); + + if (status < 0) + dev_err(&port->dev, "%s - failed, %d\n", __func__, status); + + kfree(data); + + return status; +} + +static int ti_do_download(struct usb_device *dev, int pipe, + u8 *buffer, int size) +{ + int pos; + u8 cs = 0; + int done; + struct ti_firmware_header *header; + int status = 0; + int len; + + for (pos = sizeof(struct ti_firmware_header); pos < size; pos++) + cs = (__u8)(cs + buffer[pos]); + + header = (struct ti_firmware_header *)buffer; + header->wLength = cpu_to_le16((__u16)(size + - sizeof(struct ti_firmware_header))); + header->bCheckSum = cs; + + dev_dbg(&dev->dev, "%s - downloading firmware\n", __func__); + for (pos = 0; pos < size; pos += done) { + len = min(size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE); + status = usb_bulk_msg(dev, pipe, buffer + pos, len, + &done, 1000); + if (status) + break; + } + return status; +} + +static int ti_download_firmware(struct ti_device *tdev) +{ + int status; + int buffer_size; + __u8 *buffer; + struct usb_device *dev = tdev->td_serial->dev; + unsigned int pipe = usb_sndbulkpipe(dev, + tdev->td_serial->port[0]->bulk_out_endpointAddress); + const struct firmware *fw_p; + char buf[32]; + + /* try ID specific firmware first, then try generic firmware */ + sprintf(buf, "ti_usb-v%04x-p%04x.fw", + le16_to_cpu(dev->descriptor.idVendor), + le16_to_cpu(dev->descriptor.idProduct)); + status = request_firmware(&fw_p, buf, &dev->dev); + + if (status != 0) { + buf[0] = '\0'; + if (le16_to_cpu(dev->descriptor.idVendor) == MTS_VENDOR_ID) { + switch (le16_to_cpu(dev->descriptor.idProduct)) { + case MTS_CDMA_PRODUCT_ID: + strcpy(buf, "mts_cdma.fw"); + break; + case MTS_GSM_PRODUCT_ID: + strcpy(buf, "mts_gsm.fw"); + break; + case MTS_EDGE_PRODUCT_ID: + strcpy(buf, "mts_edge.fw"); + break; + case MTS_MT9234MU_PRODUCT_ID: + strcpy(buf, "mts_mt9234mu.fw"); + break; + case MTS_MT9234ZBA_PRODUCT_ID: + strcpy(buf, "mts_mt9234zba.fw"); + break; + case MTS_MT9234ZBAOLD_PRODUCT_ID: + strcpy(buf, "mts_mt9234zba.fw"); + break; } + } + if (buf[0] == '\0') { + if (tdev->td_is_3410) + strcpy(buf, "ti_3410.fw"); + else + strcpy(buf, "ti_5052.fw"); + } + status = request_firmware(&fw_p, buf, &dev->dev); + } + if (status) { + dev_err(&dev->dev, "%s - firmware not found\n", __func__); + return -ENOENT; + } + if (fw_p->size > TI_FIRMWARE_BUF_SIZE) { + dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size); + release_firmware(fw_p); + return -ENOENT; + } + + buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header); + buffer = kmalloc(buffer_size, GFP_KERNEL); + if (buffer) { + memcpy(buffer, fw_p->data, fw_p->size); + memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size); + status = ti_do_download(dev, pipe, buffer, fw_p->size); + kfree(buffer); + } else { + status = -ENOMEM; + } + release_firmware(fw_p); + if (status) { + dev_err(&dev->dev, "%s - error downloading firmware, %d\n", + __func__, status); + return status; + } + + dev_dbg(&dev->dev, "%s - download successful\n", __func__); + + return 0; +} diff --git a/kernel/drivers/usb/serial/ti_usb_3410_5052.h b/kernel/drivers/usb/serial/ti_usb_3410_5052.h new file mode 100644 index 000000000..4a2423e84 --- /dev/null +++ b/kernel/drivers/usb/serial/ti_usb_3410_5052.h @@ -0,0 +1,247 @@ +/* vi: ts=8 sw=8 + * + * TI 3410/5052 USB Serial Driver Header + * + * Copyright (C) 2004 Texas Instruments + * + * This driver is based on the Linux io_ti driver, which is + * Copyright (C) 2000-2002 Inside Out Networks + * Copyright (C) 2001-2002 Greg Kroah-Hartman + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * For questions or problems with this driver, contact Texas Instruments + * technical support, or Al Borchers <alborchers@steinerpoint.com>, or + * Peter Berger <pberger@brimson.com>. + */ + +#ifndef _TI_3410_5052_H_ +#define _TI_3410_5052_H_ + +/* Configuration ids */ +#define TI_BOOT_CONFIG 1 +#define TI_ACTIVE_CONFIG 2 + +/* Vendor and product ids */ +#define TI_VENDOR_ID 0x0451 +#define IBM_VENDOR_ID 0x04b3 +#define TI_3410_PRODUCT_ID 0x3410 +#define IBM_4543_PRODUCT_ID 0x4543 +#define IBM_454B_PRODUCT_ID 0x454b +#define IBM_454C_PRODUCT_ID 0x454c +#define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */ +#define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */ +#define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */ +#define TI_5052_EEPROM_PRODUCT_ID 0x505A /* EEPROM, no firmware */ +#define TI_5052_FIRMWARE_PRODUCT_ID 0x505F /* firmware is running */ +#define FRI2_PRODUCT_ID 0x5053 /* Fish River Island II */ + +/* Multi-Tech vendor and product ids */ +#define MTS_VENDOR_ID 0x06E0 +#define MTS_GSM_NO_FW_PRODUCT_ID 0xF108 +#define MTS_CDMA_NO_FW_PRODUCT_ID 0xF109 +#define MTS_CDMA_PRODUCT_ID 0xF110 +#define MTS_GSM_PRODUCT_ID 0xF111 +#define MTS_EDGE_PRODUCT_ID 0xF112 +#define MTS_MT9234MU_PRODUCT_ID 0xF114 +#define MTS_MT9234ZBA_PRODUCT_ID 0xF115 +#define MTS_MT9234ZBAOLD_PRODUCT_ID 0x0319 + +/* Abbott Diabetics vendor and product ids */ +#define ABBOTT_VENDOR_ID 0x1a61 +#define ABBOTT_STEREO_PLUG_ID 0x3410 +#define ABBOTT_PRODUCT_ID ABBOTT_STEREO_PLUG_ID +#define ABBOTT_STRIP_PORT_ID 0x3420 + +/* Commands */ +#define TI_GET_VERSION 0x01 +#define TI_GET_PORT_STATUS 0x02 +#define TI_GET_PORT_DEV_INFO 0x03 +#define TI_GET_CONFIG 0x04 +#define TI_SET_CONFIG 0x05 +#define TI_OPEN_PORT 0x06 +#define TI_CLOSE_PORT 0x07 +#define TI_START_PORT 0x08 +#define TI_STOP_PORT 0x09 +#define TI_TEST_PORT 0x0A +#define TI_PURGE_PORT 0x0B +#define TI_RESET_EXT_DEVICE 0x0C +#define TI_WRITE_DATA 0x80 +#define TI_READ_DATA 0x81 +#define TI_REQ_TYPE_CLASS 0x82 + +/* Module identifiers */ +#define TI_I2C_PORT 0x01 +#define TI_IEEE1284_PORT 0x02 +#define TI_UART1_PORT 0x03 +#define TI_UART2_PORT 0x04 +#define TI_RAM_PORT 0x05 + +/* Modem status */ +#define TI_MSR_DELTA_CTS 0x01 +#define TI_MSR_DELTA_DSR 0x02 +#define TI_MSR_DELTA_RI 0x04 +#define TI_MSR_DELTA_CD 0x08 +#define TI_MSR_CTS 0x10 +#define TI_MSR_DSR 0x20 +#define TI_MSR_RI 0x40 +#define TI_MSR_CD 0x80 +#define TI_MSR_DELTA_MASK 0x0F +#define TI_MSR_MASK 0xF0 + +/* Line status */ +#define TI_LSR_OVERRUN_ERROR 0x01 +#define TI_LSR_PARITY_ERROR 0x02 +#define TI_LSR_FRAMING_ERROR 0x04 +#define TI_LSR_BREAK 0x08 +#define TI_LSR_ERROR 0x0F +#define TI_LSR_RX_FULL 0x10 +#define TI_LSR_TX_EMPTY 0x20 + +/* Line control */ +#define TI_LCR_BREAK 0x40 + +/* Modem control */ +#define TI_MCR_LOOP 0x04 +#define TI_MCR_DTR 0x10 +#define TI_MCR_RTS 0x20 + +/* Mask settings */ +#define TI_UART_ENABLE_RTS_IN 0x0001 +#define TI_UART_DISABLE_RTS 0x0002 +#define TI_UART_ENABLE_PARITY_CHECKING 0x0008 +#define TI_UART_ENABLE_DSR_OUT 0x0010 +#define TI_UART_ENABLE_CTS_OUT 0x0020 +#define TI_UART_ENABLE_X_OUT 0x0040 +#define TI_UART_ENABLE_XA_OUT 0x0080 +#define TI_UART_ENABLE_X_IN 0x0100 +#define TI_UART_ENABLE_DTR_IN 0x0800 +#define TI_UART_DISABLE_DTR 0x1000 +#define TI_UART_ENABLE_MS_INTS 0x2000 +#define TI_UART_ENABLE_AUTO_START_DMA 0x4000 + +/* Parity */ +#define TI_UART_NO_PARITY 0x00 +#define TI_UART_ODD_PARITY 0x01 +#define TI_UART_EVEN_PARITY 0x02 +#define TI_UART_MARK_PARITY 0x03 +#define TI_UART_SPACE_PARITY 0x04 + +/* Stop bits */ +#define TI_UART_1_STOP_BITS 0x00 +#define TI_UART_1_5_STOP_BITS 0x01 +#define TI_UART_2_STOP_BITS 0x02 + +/* Bits per character */ +#define TI_UART_5_DATA_BITS 0x00 +#define TI_UART_6_DATA_BITS 0x01 +#define TI_UART_7_DATA_BITS 0x02 +#define TI_UART_8_DATA_BITS 0x03 + +/* 232/485 modes */ +#define TI_UART_232 0x00 +#define TI_UART_485_RECEIVER_DISABLED 0x01 +#define TI_UART_485_RECEIVER_ENABLED 0x02 + +/* Pipe transfer mode and timeout */ +#define TI_PIPE_MODE_CONTINOUS 0x01 +#define TI_PIPE_MODE_MASK 0x03 +#define TI_PIPE_TIMEOUT_MASK 0x7C +#define TI_PIPE_TIMEOUT_ENABLE 0x80 + +/* Config struct */ +struct ti_uart_config { + __u16 wBaudRate; + __u16 wFlags; + __u8 bDataBits; + __u8 bParity; + __u8 bStopBits; + char cXon; + char cXoff; + __u8 bUartMode; +} __attribute__((packed)); + +/* Get port status */ +struct ti_port_status { + __u8 bCmdCode; + __u8 bModuleId; + __u8 bErrorCode; + __u8 bMSR; + __u8 bLSR; +} __attribute__((packed)); + +/* Purge modes */ +#define TI_PURGE_OUTPUT 0x00 +#define TI_PURGE_INPUT 0x80 + +/* Read/Write data */ +#define TI_RW_DATA_ADDR_SFR 0x10 +#define TI_RW_DATA_ADDR_IDATA 0x20 +#define TI_RW_DATA_ADDR_XDATA 0x30 +#define TI_RW_DATA_ADDR_CODE 0x40 +#define TI_RW_DATA_ADDR_GPIO 0x50 +#define TI_RW_DATA_ADDR_I2C 0x60 +#define TI_RW_DATA_ADDR_FLASH 0x70 +#define TI_RW_DATA_ADDR_DSP 0x80 + +#define TI_RW_DATA_UNSPECIFIED 0x00 +#define TI_RW_DATA_BYTE 0x01 +#define TI_RW_DATA_WORD 0x02 +#define TI_RW_DATA_DOUBLE_WORD 0x04 + +struct ti_write_data_bytes { + __u8 bAddrType; + __u8 bDataType; + __u8 bDataCounter; + __be16 wBaseAddrHi; + __be16 wBaseAddrLo; + __u8 bData[0]; +} __attribute__((packed)); + +struct ti_read_data_request { + __u8 bAddrType; + __u8 bDataType; + __u8 bDataCounter; + __be16 wBaseAddrHi; + __be16 wBaseAddrLo; +} __attribute__((packed)); + +struct ti_read_data_bytes { + __u8 bCmdCode; + __u8 bModuleId; + __u8 bErrorCode; + __u8 bData[0]; +} __attribute__((packed)); + +/* Interrupt struct */ +struct ti_interrupt { + __u8 bICode; + __u8 bIInfo; +} __attribute__((packed)); + +/* Interrupt codes */ +#define TI_GET_PORT_FROM_CODE(c) (((c) >> 4) - 3) +#define TI_GET_FUNC_FROM_CODE(c) ((c) & 0x0f) +#define TI_CODE_HARDWARE_ERROR 0xFF +#define TI_CODE_DATA_ERROR 0x03 +#define TI_CODE_MODEM_STATUS 0x04 + +/* Download firmware max packet size */ +#define TI_DOWNLOAD_MAX_PACKET_SIZE 64 + +/* Firmware image header */ +struct ti_firmware_header { + __le16 wLength; + __u8 bCheckSum; +} __attribute__((packed)); + +/* UART addresses */ +#define TI_UART1_BASE_ADDR 0xFFA0 /* UART 1 base address */ +#define TI_UART2_BASE_ADDR 0xFFB0 /* UART 2 base address */ +#define TI_UART_OFFSET_LCR 0x0002 /* UART MCR register offset */ +#define TI_UART_OFFSET_MCR 0x0004 /* UART MCR register offset */ + +#endif /* _TI_3410_5052_H_ */ diff --git a/kernel/drivers/usb/serial/usb-serial-simple.c b/kernel/drivers/usb/serial/usb-serial-simple.c new file mode 100644 index 000000000..365866289 --- /dev/null +++ b/kernel/drivers/usb/serial/usb-serial-simple.c @@ -0,0 +1,135 @@ +/* + * USB Serial "Simple" driver + * + * Copyright (C) 2001-2006,2008,2013 Greg Kroah-Hartman <greg@kroah.com> + * Copyright (C) 2005 Arthur Huillet (ahuillet@users.sf.net) + * Copyright (C) 2005 Thomas Hergenhahn <thomas.hergenhahn@suse.de> + * Copyright (C) 2009 Outpost Embedded, LLC + * Copyright (C) 2010 Zilogic Systems <code@zilogic.com> + * Copyright (C) 2013 Wei Shuai <cpuwolf@gmail.com> + * Copyright (C) 2013 Linux Foundation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +#define DEVICE_N(vendor, IDS, nport) \ +static const struct usb_device_id vendor##_id_table[] = { \ + IDS(), \ + { }, \ +}; \ +static struct usb_serial_driver vendor##_device = { \ + .driver = { \ + .owner = THIS_MODULE, \ + .name = #vendor, \ + }, \ + .id_table = vendor##_id_table, \ + .num_ports = nport, \ +}; + +#define DEVICE(vendor, IDS) DEVICE_N(vendor, IDS, 1) + +/* Medtronic CareLink USB driver */ +#define CARELINK_IDS() \ + { USB_DEVICE(0x0a21, 0x8001) } /* MMT-7305WW */ +DEVICE(carelink, CARELINK_IDS); + +/* ZIO Motherboard USB driver */ +#define ZIO_IDS() \ + { USB_DEVICE(0x1CBE, 0x0103) } +DEVICE(zio, ZIO_IDS); + +/* Funsoft Serial USB driver */ +#define FUNSOFT_IDS() \ + { USB_DEVICE(0x1404, 0xcddc) } +DEVICE(funsoft, FUNSOFT_IDS); + +/* Infineon Flashloader driver */ +#define FLASHLOADER_IDS() \ + { USB_DEVICE(0x8087, 0x0716) } +DEVICE(flashloader, FLASHLOADER_IDS); + +/* Google Serial USB SubClass */ +#define GOOGLE_IDS() \ + { USB_VENDOR_AND_INTERFACE_INFO(0x18d1, \ + USB_CLASS_VENDOR_SPEC, \ + 0x50, \ + 0x01) } +DEVICE(google, GOOGLE_IDS); + +/* ViVOpay USB Serial Driver */ +#define VIVOPAY_IDS() \ + { USB_DEVICE(0x1d5f, 0x1004) } /* ViVOpay 8800 */ +DEVICE(vivopay, VIVOPAY_IDS); + +/* Motorola USB Phone driver */ +#define MOTO_IDS() \ + { USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */ \ + { USB_DEVICE(0x0c44, 0x0022) }, /* unknown Motorola phone */ \ + { USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */ \ + { USB_DEVICE(0x22b8, 0x2c84) }, /* Motorola VE240 phone */ \ + { USB_DEVICE(0x22b8, 0x2c64) } /* Motorola V950 phone */ +DEVICE(moto_modem, MOTO_IDS); + +/* Novatel Wireless GPS driver */ +#define NOVATEL_IDS() \ + { USB_DEVICE(0x09d7, 0x0100) } /* NovAtel FlexPack GPS */ +DEVICE_N(novatel_gps, NOVATEL_IDS, 3); + +/* HP4x (48/49) Generic Serial driver */ +#define HP4X_IDS() \ + { USB_DEVICE(0x03f0, 0x0121) } +DEVICE(hp4x, HP4X_IDS); + +/* Suunto ANT+ USB Driver */ +#define SUUNTO_IDS() \ + { USB_DEVICE(0x0fcf, 0x1008) }, \ + { USB_DEVICE(0x0fcf, 0x1009) } /* Dynastream ANT USB-m Stick */ +DEVICE(suunto, SUUNTO_IDS); + +/* Siemens USB/MPI adapter */ +#define SIEMENS_IDS() \ + { USB_DEVICE(0x908, 0x0004) } +DEVICE(siemens_mpi, SIEMENS_IDS); + +/* All of the above structures mushed into two lists */ +static struct usb_serial_driver * const serial_drivers[] = { + &carelink_device, + &zio_device, + &funsoft_device, + &flashloader_device, + &google_device, + &vivopay_device, + &moto_modem_device, + &novatel_gps_device, + &hp4x_device, + &suunto_device, + &siemens_mpi_device, + NULL +}; + +static const struct usb_device_id id_table[] = { + CARELINK_IDS(), + ZIO_IDS(), + FUNSOFT_IDS(), + FLASHLOADER_IDS(), + GOOGLE_IDS(), + VIVOPAY_IDS(), + MOTO_IDS(), + NOVATEL_IDS(), + HP4X_IDS(), + SUUNTO_IDS(), + SIEMENS_IDS(), + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +module_usb_serial_driver(serial_drivers, id_table); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/usb-serial.c b/kernel/drivers/usb/serial/usb-serial.c new file mode 100644 index 000000000..529066bbc --- /dev/null +++ b/kernel/drivers/usb/serial/usb-serial.c @@ -0,0 +1,1477 @@ +/* + * USB Serial Converter driver + * + * Copyright (C) 2009 - 2013 Johan Hovold (jhovold@gmail.com) + * Copyright (C) 1999 - 2012 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2000 Peter Berger (pberger@brimson.com) + * Copyright (C) 2000 Al Borchers (borchers@steinerpoint.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This driver was originally based on the ACM driver by Armin Fuerst (which was + * based on a driver by Brad Keryan) + * + * See Documentation/usb/usb-serial.txt for more information on using this + * driver + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/seq_file.h> +#include <linux/spinlock.h> +#include <linux/mutex.h> +#include <linux/list.h> +#include <linux/uaccess.h> +#include <linux/serial.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/kfifo.h> +#include <linux/idr.h> +#include "pl2303.h" + +#define DRIVER_AUTHOR "Greg Kroah-Hartman <gregkh@linuxfoundation.org>" +#define DRIVER_DESC "USB Serial Driver core" + +#define USB_SERIAL_TTY_MAJOR 188 +#define USB_SERIAL_TTY_MINORS 512 /* should be enough for a while */ + +/* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead + the MODULE_DEVICE_TABLE declarations in each serial driver + cause the "hotplug" program to pull in whatever module is necessary + via modprobe, and modprobe will load usbserial because the serial + drivers depend on it. +*/ + +static DEFINE_IDR(serial_minors); +static DEFINE_MUTEX(table_lock); +static LIST_HEAD(usb_serial_driver_list); + +/* + * Look up the serial port structure. If it is found and it hasn't been + * disconnected, return with the parent usb_serial structure's disc_mutex held + * and its refcount incremented. Otherwise return NULL. + */ +struct usb_serial_port *usb_serial_port_get_by_minor(unsigned minor) +{ + struct usb_serial *serial; + struct usb_serial_port *port; + + mutex_lock(&table_lock); + port = idr_find(&serial_minors, minor); + if (!port) + goto exit; + + serial = port->serial; + mutex_lock(&serial->disc_mutex); + if (serial->disconnected) { + mutex_unlock(&serial->disc_mutex); + port = NULL; + } else { + kref_get(&serial->kref); + } +exit: + mutex_unlock(&table_lock); + return port; +} + +static int allocate_minors(struct usb_serial *serial, int num_ports) +{ + struct usb_serial_port *port; + unsigned int i, j; + int minor; + + dev_dbg(&serial->interface->dev, "%s %d\n", __func__, num_ports); + + mutex_lock(&table_lock); + for (i = 0; i < num_ports; ++i) { + port = serial->port[i]; + minor = idr_alloc(&serial_minors, port, 0, 0, GFP_KERNEL); + if (minor < 0) + goto error; + port->minor = minor; + port->port_number = i; + } + serial->minors_reserved = 1; + mutex_unlock(&table_lock); + return 0; +error: + /* unwind the already allocated minors */ + for (j = 0; j < i; ++j) + idr_remove(&serial_minors, serial->port[j]->minor); + mutex_unlock(&table_lock); + return minor; +} + +static void release_minors(struct usb_serial *serial) +{ + int i; + + mutex_lock(&table_lock); + for (i = 0; i < serial->num_ports; ++i) + idr_remove(&serial_minors, serial->port[i]->minor); + mutex_unlock(&table_lock); + serial->minors_reserved = 0; +} + +static void destroy_serial(struct kref *kref) +{ + struct usb_serial *serial; + struct usb_serial_port *port; + int i; + + serial = to_usb_serial(kref); + + /* return the minor range that this device had */ + if (serial->minors_reserved) + release_minors(serial); + + if (serial->attached && serial->type->release) + serial->type->release(serial); + + /* Now that nothing is using the ports, they can be freed */ + for (i = 0; i < serial->num_port_pointers; ++i) { + port = serial->port[i]; + if (port) { + port->serial = NULL; + put_device(&port->dev); + } + } + + usb_put_intf(serial->interface); + usb_put_dev(serial->dev); + kfree(serial); +} + +void usb_serial_put(struct usb_serial *serial) +{ + kref_put(&serial->kref, destroy_serial); +} + +/***************************************************************************** + * Driver tty interface functions + *****************************************************************************/ + +/** + * serial_install - install tty + * @driver: the driver (USB in our case) + * @tty: the tty being created + * + * Create the termios objects for this tty. We use the default + * USB serial settings but permit them to be overridden by + * serial->type->init_termios. + * + * This is the first place a new tty gets used. Hence this is where we + * acquire references to the usb_serial structure and the driver module, + * where we store a pointer to the port, and where we do an autoresume. + * All these actions are reversed in serial_cleanup(). + */ +static int serial_install(struct tty_driver *driver, struct tty_struct *tty) +{ + int idx = tty->index; + struct usb_serial *serial; + struct usb_serial_port *port; + int retval = -ENODEV; + + port = usb_serial_port_get_by_minor(idx); + if (!port) + return retval; + + serial = port->serial; + if (!try_module_get(serial->type->driver.owner)) + goto error_module_get; + + retval = usb_autopm_get_interface(serial->interface); + if (retval) + goto error_get_interface; + + retval = tty_port_install(&port->port, driver, tty); + if (retval) + goto error_init_termios; + + mutex_unlock(&serial->disc_mutex); + + /* allow the driver to update the settings */ + if (serial->type->init_termios) + serial->type->init_termios(tty); + + tty->driver_data = port; + + return retval; + + error_init_termios: + usb_autopm_put_interface(serial->interface); + error_get_interface: + module_put(serial->type->driver.owner); + error_module_get: + usb_serial_put(serial); + mutex_unlock(&serial->disc_mutex); + return retval; +} + +static int serial_port_activate(struct tty_port *tport, struct tty_struct *tty) +{ + struct usb_serial_port *port = + container_of(tport, struct usb_serial_port, port); + struct usb_serial *serial = port->serial; + int retval; + + mutex_lock(&serial->disc_mutex); + if (serial->disconnected) + retval = -ENODEV; + else + retval = port->serial->type->open(tty, port); + mutex_unlock(&serial->disc_mutex); + + if (retval < 0) + retval = usb_translate_errors(retval); + + return retval; +} + +static int serial_open(struct tty_struct *tty, struct file *filp) +{ + struct usb_serial_port *port = tty->driver_data; + + dev_dbg(tty->dev, "%s\n", __func__); + + return tty_port_open(&port->port, tty, filp); +} + +/** + * serial_port_shutdown - shut down hardware + * @tport: tty port to shut down + * + * Shut down a USB serial port. Serialized against activate by the + * tport mutex and kept to matching open/close pairs + * of calls by the ASYNCB_INITIALIZED flag. + * + * Not called if tty is console. + */ +static void serial_port_shutdown(struct tty_port *tport) +{ + struct usb_serial_port *port = + container_of(tport, struct usb_serial_port, port); + struct usb_serial_driver *drv = port->serial->type; + + if (drv->close) + drv->close(port); +} + +static void serial_hangup(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + + dev_dbg(tty->dev, "%s\n", __func__); + + tty_port_hangup(&port->port); +} + +static void serial_close(struct tty_struct *tty, struct file *filp) +{ + struct usb_serial_port *port = tty->driver_data; + + dev_dbg(tty->dev, "%s\n", __func__); + + tty_port_close(&port->port, tty, filp); +} + +/** + * serial_cleanup - free resources post close/hangup + * @port: port to free up + * + * Do the resource freeing and refcount dropping for the port. + * Avoid freeing the console. + * + * Called asynchronously after the last tty kref is dropped. + */ +static void serial_cleanup(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial; + struct module *owner; + + dev_dbg(tty->dev, "%s\n", __func__); + + /* The console is magical. Do not hang up the console hardware + * or there will be tears. + */ + if (port->port.console) + return; + + tty->driver_data = NULL; + + serial = port->serial; + owner = serial->type->driver.owner; + + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) + usb_autopm_put_interface(serial->interface); + mutex_unlock(&serial->disc_mutex); + + usb_serial_put(serial); + module_put(owner); +} + +static int serial_write(struct tty_struct *tty, const unsigned char *buf, + int count) +{ + struct usb_serial_port *port = tty->driver_data; + int retval = -ENODEV; + + if (port->serial->dev->state == USB_STATE_NOTATTACHED) + goto exit; + + dev_dbg(tty->dev, "%s - %d byte(s)\n", __func__, count); + + retval = port->serial->type->write(tty, port, buf, count); + if (retval < 0) + retval = usb_translate_errors(retval); +exit: + return retval; +} + +static int serial_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + + dev_dbg(tty->dev, "%s\n", __func__); + + return port->serial->type->write_room(tty); +} + +static int serial_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + + dev_dbg(tty->dev, "%s\n", __func__); + + if (serial->disconnected) + return 0; + + return serial->type->chars_in_buffer(tty); +} + +static void serial_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + + dev_dbg(tty->dev, "%s\n", __func__); + + if (!port->serial->type->wait_until_sent) + return; + + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) + port->serial->type->wait_until_sent(tty, timeout); + mutex_unlock(&serial->disc_mutex); +} + +static void serial_throttle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + + dev_dbg(tty->dev, "%s\n", __func__); + + if (port->serial->type->throttle) + port->serial->type->throttle(tty); +} + +static void serial_unthrottle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + + dev_dbg(tty->dev, "%s\n", __func__); + + if (port->serial->type->unthrottle) + port->serial->type->unthrottle(tty); +} + +static int serial_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + int retval = -ENOIOCTLCMD; + + dev_dbg(tty->dev, "%s - cmd 0x%04x\n", __func__, cmd); + + switch (cmd) { + case TIOCMIWAIT: + if (port->serial->type->tiocmiwait) + retval = port->serial->type->tiocmiwait(tty, arg); + break; + default: + if (port->serial->type->ioctl) + retval = port->serial->type->ioctl(tty, cmd, arg); + } + + return retval; +} + +static void serial_set_termios(struct tty_struct *tty, struct ktermios *old) +{ + struct usb_serial_port *port = tty->driver_data; + + dev_dbg(tty->dev, "%s\n", __func__); + + if (port->serial->type->set_termios) + port->serial->type->set_termios(tty, port, old); + else + tty_termios_copy_hw(&tty->termios, old); +} + +static int serial_break(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + + dev_dbg(tty->dev, "%s\n", __func__); + + if (port->serial->type->break_ctl) + port->serial->type->break_ctl(tty, break_state); + + return 0; +} + +static int serial_proc_show(struct seq_file *m, void *v) +{ + struct usb_serial *serial; + struct usb_serial_port *port; + int i; + char tmp[40]; + + seq_puts(m, "usbserinfo:1.0 driver:2.0\n"); + for (i = 0; i < USB_SERIAL_TTY_MINORS; ++i) { + port = usb_serial_port_get_by_minor(i); + if (port == NULL) + continue; + serial = port->serial; + + seq_printf(m, "%d:", i); + if (serial->type->driver.owner) + seq_printf(m, " module:%s", + module_name(serial->type->driver.owner)); + seq_printf(m, " name:\"%s\"", + serial->type->description); + seq_printf(m, " vendor:%04x product:%04x", + le16_to_cpu(serial->dev->descriptor.idVendor), + le16_to_cpu(serial->dev->descriptor.idProduct)); + seq_printf(m, " num_ports:%d", serial->num_ports); + seq_printf(m, " port:%d", port->port_number); + usb_make_path(serial->dev, tmp, sizeof(tmp)); + seq_printf(m, " path:%s", tmp); + + seq_putc(m, '\n'); + usb_serial_put(serial); + mutex_unlock(&serial->disc_mutex); + } + return 0; +} + +static int serial_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, serial_proc_show, NULL); +} + +static const struct file_operations serial_proc_fops = { + .owner = THIS_MODULE, + .open = serial_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int serial_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + + dev_dbg(tty->dev, "%s\n", __func__); + + if (port->serial->type->tiocmget) + return port->serial->type->tiocmget(tty); + return -EINVAL; +} + +static int serial_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + + dev_dbg(tty->dev, "%s\n", __func__); + + if (port->serial->type->tiocmset) + return port->serial->type->tiocmset(tty, set, clear); + return -EINVAL; +} + +static int serial_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + struct usb_serial_port *port = tty->driver_data; + + dev_dbg(tty->dev, "%s\n", __func__); + + if (port->serial->type->get_icount) + return port->serial->type->get_icount(tty, icount); + return -EINVAL; +} + +/* + * We would be calling tty_wakeup here, but unfortunately some line + * disciplines have an annoying habit of calling tty->write from + * the write wakeup callback (e.g. n_hdlc.c). + */ +void usb_serial_port_softint(struct usb_serial_port *port) +{ + schedule_work(&port->work); +} +EXPORT_SYMBOL_GPL(usb_serial_port_softint); + +static void usb_serial_port_work(struct work_struct *work) +{ + struct usb_serial_port *port = + container_of(work, struct usb_serial_port, work); + + tty_port_tty_wakeup(&port->port); +} + +static void usb_serial_port_poison_urbs(struct usb_serial_port *port) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) + usb_poison_urb(port->read_urbs[i]); + for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) + usb_poison_urb(port->write_urbs[i]); + + usb_poison_urb(port->interrupt_in_urb); + usb_poison_urb(port->interrupt_out_urb); +} + +static void usb_serial_port_unpoison_urbs(struct usb_serial_port *port) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) + usb_unpoison_urb(port->read_urbs[i]); + for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) + usb_unpoison_urb(port->write_urbs[i]); + + usb_unpoison_urb(port->interrupt_in_urb); + usb_unpoison_urb(port->interrupt_out_urb); +} + +static void usb_serial_port_release(struct device *dev) +{ + struct usb_serial_port *port = to_usb_serial_port(dev); + int i; + + dev_dbg(dev, "%s\n", __func__); + + usb_free_urb(port->interrupt_in_urb); + usb_free_urb(port->interrupt_out_urb); + for (i = 0; i < ARRAY_SIZE(port->read_urbs); ++i) { + usb_free_urb(port->read_urbs[i]); + kfree(port->bulk_in_buffers[i]); + } + for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) { + usb_free_urb(port->write_urbs[i]); + kfree(port->bulk_out_buffers[i]); + } + kfifo_free(&port->write_fifo); + kfree(port->interrupt_in_buffer); + kfree(port->interrupt_out_buffer); + tty_port_destroy(&port->port); + kfree(port); +} + +static struct usb_serial *create_serial(struct usb_device *dev, + struct usb_interface *interface, + struct usb_serial_driver *driver) +{ + struct usb_serial *serial; + + serial = kzalloc(sizeof(*serial), GFP_KERNEL); + if (!serial) + return NULL; + serial->dev = usb_get_dev(dev); + serial->type = driver; + serial->interface = usb_get_intf(interface); + kref_init(&serial->kref); + mutex_init(&serial->disc_mutex); + serial->minors_reserved = 0; + + return serial; +} + +static const struct usb_device_id *match_dynamic_id(struct usb_interface *intf, + struct usb_serial_driver *drv) +{ + struct usb_dynid *dynid; + + spin_lock(&drv->dynids.lock); + list_for_each_entry(dynid, &drv->dynids.list, node) { + if (usb_match_one_id(intf, &dynid->id)) { + spin_unlock(&drv->dynids.lock); + return &dynid->id; + } + } + spin_unlock(&drv->dynids.lock); + return NULL; +} + +static const struct usb_device_id *get_iface_id(struct usb_serial_driver *drv, + struct usb_interface *intf) +{ + const struct usb_device_id *id; + + id = usb_match_id(intf, drv->id_table); + if (id) { + dev_dbg(&intf->dev, "static descriptor matches\n"); + goto exit; + } + id = match_dynamic_id(intf, drv); + if (id) + dev_dbg(&intf->dev, "dynamic descriptor matches\n"); +exit: + return id; +} + +/* Caller must hold table_lock */ +static struct usb_serial_driver *search_serial_device( + struct usb_interface *iface) +{ + const struct usb_device_id *id = NULL; + struct usb_serial_driver *drv; + struct usb_driver *driver = to_usb_driver(iface->dev.driver); + + /* Check if the usb id matches a known device */ + list_for_each_entry(drv, &usb_serial_driver_list, driver_list) { + if (drv->usb_driver == driver) + id = get_iface_id(drv, iface); + if (id) + return drv; + } + + return NULL; +} + +static int serial_port_carrier_raised(struct tty_port *port) +{ + struct usb_serial_port *p = container_of(port, struct usb_serial_port, port); + struct usb_serial_driver *drv = p->serial->type; + + if (drv->carrier_raised) + return drv->carrier_raised(p); + /* No carrier control - don't block */ + return 1; +} + +static void serial_port_dtr_rts(struct tty_port *port, int on) +{ + struct usb_serial_port *p = container_of(port, struct usb_serial_port, port); + struct usb_serial_driver *drv = p->serial->type; + + if (drv->dtr_rts) + drv->dtr_rts(p, on); +} + +static ssize_t port_number_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_serial_port *port = to_usb_serial_port(dev); + + return sprintf(buf, "%u\n", port->port_number); +} +static DEVICE_ATTR_RO(port_number); + +static struct attribute *usb_serial_port_attrs[] = { + &dev_attr_port_number.attr, + NULL +}; +ATTRIBUTE_GROUPS(usb_serial_port); + +static const struct tty_port_operations serial_port_ops = { + .carrier_raised = serial_port_carrier_raised, + .dtr_rts = serial_port_dtr_rts, + .activate = serial_port_activate, + .shutdown = serial_port_shutdown, +}; + +static int usb_serial_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct device *ddev = &interface->dev; + struct usb_device *dev = interface_to_usbdev(interface); + struct usb_serial *serial = NULL; + struct usb_serial_port *port; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + struct usb_endpoint_descriptor *interrupt_in_endpoint[MAX_NUM_PORTS]; + struct usb_endpoint_descriptor *interrupt_out_endpoint[MAX_NUM_PORTS]; + struct usb_endpoint_descriptor *bulk_in_endpoint[MAX_NUM_PORTS]; + struct usb_endpoint_descriptor *bulk_out_endpoint[MAX_NUM_PORTS]; + struct usb_serial_driver *type = NULL; + int retval; + int buffer_size; + int i; + int j; + int num_interrupt_in = 0; + int num_interrupt_out = 0; + int num_bulk_in = 0; + int num_bulk_out = 0; + int num_ports = 0; + int max_endpoints; + + mutex_lock(&table_lock); + type = search_serial_device(interface); + if (!type) { + mutex_unlock(&table_lock); + dev_dbg(ddev, "none matched\n"); + return -ENODEV; + } + + if (!try_module_get(type->driver.owner)) { + mutex_unlock(&table_lock); + dev_err(ddev, "module get failed, exiting\n"); + return -EIO; + } + mutex_unlock(&table_lock); + + serial = create_serial(dev, interface, type); + if (!serial) { + module_put(type->driver.owner); + return -ENOMEM; + } + + /* if this device type has a probe function, call it */ + if (type->probe) { + const struct usb_device_id *id; + + id = get_iface_id(type, interface); + retval = type->probe(serial, id); + + if (retval) { + dev_dbg(ddev, "sub driver rejected device\n"); + usb_serial_put(serial); + module_put(type->driver.owner); + return retval; + } + } + + /* descriptor matches, let's find the endpoints needed */ + /* check out the endpoints */ + iface_desc = interface->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + + if (usb_endpoint_is_bulk_in(endpoint)) { + /* we found a bulk in endpoint */ + dev_dbg(ddev, "found bulk in on endpoint %d\n", i); + if (num_bulk_in < MAX_NUM_PORTS) { + bulk_in_endpoint[num_bulk_in] = endpoint; + ++num_bulk_in; + } + } + + if (usb_endpoint_is_bulk_out(endpoint)) { + /* we found a bulk out endpoint */ + dev_dbg(ddev, "found bulk out on endpoint %d\n", i); + if (num_bulk_out < MAX_NUM_PORTS) { + bulk_out_endpoint[num_bulk_out] = endpoint; + ++num_bulk_out; + } + } + + if (usb_endpoint_is_int_in(endpoint)) { + /* we found a interrupt in endpoint */ + dev_dbg(ddev, "found interrupt in on endpoint %d\n", i); + if (num_interrupt_in < MAX_NUM_PORTS) { + interrupt_in_endpoint[num_interrupt_in] = + endpoint; + ++num_interrupt_in; + } + } + + if (usb_endpoint_is_int_out(endpoint)) { + /* we found an interrupt out endpoint */ + dev_dbg(ddev, "found interrupt out on endpoint %d\n", i); + if (num_interrupt_out < MAX_NUM_PORTS) { + interrupt_out_endpoint[num_interrupt_out] = + endpoint; + ++num_interrupt_out; + } + } + } + +#if defined(CONFIG_USB_SERIAL_PL2303) || defined(CONFIG_USB_SERIAL_PL2303_MODULE) + /* BEGIN HORRIBLE HACK FOR PL2303 */ + /* this is needed due to the looney way its endpoints are set up */ + if (((le16_to_cpu(dev->descriptor.idVendor) == PL2303_VENDOR_ID) && + (le16_to_cpu(dev->descriptor.idProduct) == PL2303_PRODUCT_ID)) || + ((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) && + (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) || + ((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) && + (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID)) || + ((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) && + (le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) { + if (interface != dev->actconfig->interface[0]) { + /* check out the endpoints of the other interface*/ + iface_desc = dev->actconfig->interface[0]->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + if (usb_endpoint_is_int_in(endpoint)) { + /* we found a interrupt in endpoint */ + dev_dbg(ddev, "found interrupt in for Prolific device on separate interface\n"); + if (num_interrupt_in < MAX_NUM_PORTS) { + interrupt_in_endpoint[num_interrupt_in] = endpoint; + ++num_interrupt_in; + } + } + } + } + + /* Now make sure the PL-2303 is configured correctly. + * If not, give up now and hope this hack will work + * properly during a later invocation of usb_serial_probe + */ + if (num_bulk_in == 0 || num_bulk_out == 0) { + dev_info(ddev, "PL-2303 hack: descriptors matched but endpoints did not\n"); + usb_serial_put(serial); + module_put(type->driver.owner); + return -ENODEV; + } + } + /* END HORRIBLE HACK FOR PL2303 */ +#endif + +#ifdef CONFIG_USB_SERIAL_GENERIC + if (type == &usb_serial_generic_device) { + num_ports = num_bulk_out; + if (num_ports == 0) { + dev_err(ddev, "Generic device with no bulk out, not allowed.\n"); + usb_serial_put(serial); + module_put(type->driver.owner); + return -EIO; + } + dev_info(ddev, "The \"generic\" usb-serial driver is only for testing and one-off prototypes.\n"); + dev_info(ddev, "Tell linux-usb@vger.kernel.org to add your device to a proper driver.\n"); + } +#endif + if (!num_ports) { + /* if this device type has a calc_num_ports function, call it */ + if (type->calc_num_ports) + num_ports = type->calc_num_ports(serial); + if (!num_ports) + num_ports = type->num_ports; + } + + if (num_ports > MAX_NUM_PORTS) { + dev_warn(ddev, "too many ports requested: %d\n", num_ports); + num_ports = MAX_NUM_PORTS; + } + + serial->num_ports = num_ports; + serial->num_bulk_in = num_bulk_in; + serial->num_bulk_out = num_bulk_out; + serial->num_interrupt_in = num_interrupt_in; + serial->num_interrupt_out = num_interrupt_out; + + /* found all that we need */ + dev_info(ddev, "%s converter detected\n", type->description); + + /* create our ports, we need as many as the max endpoints */ + /* we don't use num_ports here because some devices have more + endpoint pairs than ports */ + max_endpoints = max(num_bulk_in, num_bulk_out); + max_endpoints = max(max_endpoints, num_interrupt_in); + max_endpoints = max(max_endpoints, num_interrupt_out); + max_endpoints = max(max_endpoints, (int)serial->num_ports); + serial->num_port_pointers = max_endpoints; + + dev_dbg(ddev, "setting up %d port structure(s)\n", max_endpoints); + for (i = 0; i < max_endpoints; ++i) { + port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL); + if (!port) + goto probe_error; + tty_port_init(&port->port); + port->port.ops = &serial_port_ops; + port->serial = serial; + spin_lock_init(&port->lock); + /* Keep this for private driver use for the moment but + should probably go away */ + INIT_WORK(&port->work, usb_serial_port_work); + serial->port[i] = port; + port->dev.parent = &interface->dev; + port->dev.driver = NULL; + port->dev.bus = &usb_serial_bus_type; + port->dev.release = &usb_serial_port_release; + port->dev.groups = usb_serial_port_groups; + device_initialize(&port->dev); + } + + /* set up the endpoint information */ + for (i = 0; i < num_bulk_in; ++i) { + endpoint = bulk_in_endpoint[i]; + port = serial->port[i]; + buffer_size = max_t(int, serial->type->bulk_in_size, + usb_endpoint_maxp(endpoint)); + port->bulk_in_size = buffer_size; + port->bulk_in_endpointAddress = endpoint->bEndpointAddress; + + for (j = 0; j < ARRAY_SIZE(port->read_urbs); ++j) { + set_bit(j, &port->read_urbs_free); + port->read_urbs[j] = usb_alloc_urb(0, GFP_KERNEL); + if (!port->read_urbs[j]) + goto probe_error; + port->bulk_in_buffers[j] = kmalloc(buffer_size, + GFP_KERNEL); + if (!port->bulk_in_buffers[j]) + goto probe_error; + usb_fill_bulk_urb(port->read_urbs[j], dev, + usb_rcvbulkpipe(dev, + endpoint->bEndpointAddress), + port->bulk_in_buffers[j], buffer_size, + serial->type->read_bulk_callback, + port); + } + + port->read_urb = port->read_urbs[0]; + port->bulk_in_buffer = port->bulk_in_buffers[0]; + } + + for (i = 0; i < num_bulk_out; ++i) { + endpoint = bulk_out_endpoint[i]; + port = serial->port[i]; + if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL)) + goto probe_error; + buffer_size = serial->type->bulk_out_size; + if (!buffer_size) + buffer_size = usb_endpoint_maxp(endpoint); + port->bulk_out_size = buffer_size; + port->bulk_out_endpointAddress = endpoint->bEndpointAddress; + + for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) { + set_bit(j, &port->write_urbs_free); + port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL); + if (!port->write_urbs[j]) + goto probe_error; + port->bulk_out_buffers[j] = kmalloc(buffer_size, + GFP_KERNEL); + if (!port->bulk_out_buffers[j]) + goto probe_error; + usb_fill_bulk_urb(port->write_urbs[j], dev, + usb_sndbulkpipe(dev, + endpoint->bEndpointAddress), + port->bulk_out_buffers[j], buffer_size, + serial->type->write_bulk_callback, + port); + } + + port->write_urb = port->write_urbs[0]; + port->bulk_out_buffer = port->bulk_out_buffers[0]; + } + + if (serial->type->read_int_callback) { + for (i = 0; i < num_interrupt_in; ++i) { + endpoint = interrupt_in_endpoint[i]; + port = serial->port[i]; + port->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!port->interrupt_in_urb) + goto probe_error; + buffer_size = usb_endpoint_maxp(endpoint); + port->interrupt_in_endpointAddress = + endpoint->bEndpointAddress; + port->interrupt_in_buffer = kmalloc(buffer_size, + GFP_KERNEL); + if (!port->interrupt_in_buffer) + goto probe_error; + usb_fill_int_urb(port->interrupt_in_urb, dev, + usb_rcvintpipe(dev, + endpoint->bEndpointAddress), + port->interrupt_in_buffer, buffer_size, + serial->type->read_int_callback, port, + endpoint->bInterval); + } + } else if (num_interrupt_in) { + dev_dbg(ddev, "The device claims to support interrupt in transfers, but read_int_callback is not defined\n"); + } + + if (serial->type->write_int_callback) { + for (i = 0; i < num_interrupt_out; ++i) { + endpoint = interrupt_out_endpoint[i]; + port = serial->port[i]; + port->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!port->interrupt_out_urb) + goto probe_error; + buffer_size = usb_endpoint_maxp(endpoint); + port->interrupt_out_size = buffer_size; + port->interrupt_out_endpointAddress = + endpoint->bEndpointAddress; + port->interrupt_out_buffer = kmalloc(buffer_size, + GFP_KERNEL); + if (!port->interrupt_out_buffer) + goto probe_error; + usb_fill_int_urb(port->interrupt_out_urb, dev, + usb_sndintpipe(dev, + endpoint->bEndpointAddress), + port->interrupt_out_buffer, buffer_size, + serial->type->write_int_callback, port, + endpoint->bInterval); + } + } else if (num_interrupt_out) { + dev_dbg(ddev, "The device claims to support interrupt out transfers, but write_int_callback is not defined\n"); + } + + usb_set_intfdata(interface, serial); + + /* if this device type has an attach function, call it */ + if (type->attach) { + retval = type->attach(serial); + if (retval < 0) + goto probe_error; + serial->attached = 1; + if (retval > 0) { + /* quietly accept this device, but don't bind to a + serial port as it's about to disappear */ + serial->num_ports = 0; + goto exit; + } + } else { + serial->attached = 1; + } + + /* Avoid race with tty_open and serial_install by setting the + * disconnected flag and not clearing it until all ports have been + * registered. + */ + serial->disconnected = 1; + + if (allocate_minors(serial, num_ports)) { + dev_err(ddev, "No more free serial minor numbers\n"); + goto probe_error; + } + + /* register all of the individual ports with the driver core */ + for (i = 0; i < num_ports; ++i) { + port = serial->port[i]; + dev_set_name(&port->dev, "ttyUSB%d", port->minor); + dev_dbg(ddev, "registering %s\n", dev_name(&port->dev)); + device_enable_async_suspend(&port->dev); + + retval = device_add(&port->dev); + if (retval) + dev_err(ddev, "Error registering port device, continuing\n"); + } + + serial->disconnected = 0; + + usb_serial_console_init(serial->port[0]->minor); +exit: + module_put(type->driver.owner); + return 0; + +probe_error: + usb_serial_put(serial); + module_put(type->driver.owner); + return -EIO; +} + +static void usb_serial_disconnect(struct usb_interface *interface) +{ + int i; + struct usb_serial *serial = usb_get_intfdata(interface); + struct device *dev = &interface->dev; + struct usb_serial_port *port; + struct tty_struct *tty; + + usb_serial_console_disconnect(serial); + + mutex_lock(&serial->disc_mutex); + /* must set a flag, to signal subdrivers */ + serial->disconnected = 1; + mutex_unlock(&serial->disc_mutex); + + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + tty = tty_port_tty_get(&port->port); + if (tty) { + tty_vhangup(tty); + tty_kref_put(tty); + } + usb_serial_port_poison_urbs(port); + wake_up_interruptible(&port->port.delta_msr_wait); + cancel_work_sync(&port->work); + if (device_is_registered(&port->dev)) + device_del(&port->dev); + } + if (serial->type->disconnect) + serial->type->disconnect(serial); + + /* let the last holder of this object cause it to be cleaned up */ + usb_serial_put(serial); + dev_info(dev, "device disconnected\n"); +} + +int usb_serial_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct usb_serial *serial = usb_get_intfdata(intf); + int i, r = 0; + + serial->suspending = 1; + + /* + * serial->type->suspend() MUST return 0 in system sleep context, + * otherwise, the resume callback has to recover device from + * previous suspend failure. + */ + if (serial->type->suspend) { + r = serial->type->suspend(serial, message); + if (r < 0) { + serial->suspending = 0; + goto err_out; + } + } + + for (i = 0; i < serial->num_ports; ++i) + usb_serial_port_poison_urbs(serial->port[i]); +err_out: + return r; +} +EXPORT_SYMBOL(usb_serial_suspend); + +static void usb_serial_unpoison_port_urbs(struct usb_serial *serial) +{ + int i; + + for (i = 0; i < serial->num_ports; ++i) + usb_serial_port_unpoison_urbs(serial->port[i]); +} + +int usb_serial_resume(struct usb_interface *intf) +{ + struct usb_serial *serial = usb_get_intfdata(intf); + int rv; + + usb_serial_unpoison_port_urbs(serial); + + serial->suspending = 0; + if (serial->type->resume) + rv = serial->type->resume(serial); + else + rv = usb_serial_generic_resume(serial); + + return rv; +} +EXPORT_SYMBOL(usb_serial_resume); + +static int usb_serial_reset_resume(struct usb_interface *intf) +{ + struct usb_serial *serial = usb_get_intfdata(intf); + int rv; + + usb_serial_unpoison_port_urbs(serial); + + serial->suspending = 0; + if (serial->type->reset_resume) { + rv = serial->type->reset_resume(serial); + } else { + rv = -EOPNOTSUPP; + intf->needs_binding = 1; + } + + return rv; +} + +static const struct tty_operations serial_ops = { + .open = serial_open, + .close = serial_close, + .write = serial_write, + .hangup = serial_hangup, + .write_room = serial_write_room, + .ioctl = serial_ioctl, + .set_termios = serial_set_termios, + .throttle = serial_throttle, + .unthrottle = serial_unthrottle, + .break_ctl = serial_break, + .chars_in_buffer = serial_chars_in_buffer, + .wait_until_sent = serial_wait_until_sent, + .tiocmget = serial_tiocmget, + .tiocmset = serial_tiocmset, + .get_icount = serial_get_icount, + .cleanup = serial_cleanup, + .install = serial_install, + .proc_fops = &serial_proc_fops, +}; + + +struct tty_driver *usb_serial_tty_driver; + +/* Driver structure we register with the USB core */ +static struct usb_driver usb_serial_driver = { + .name = "usbserial", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .suspend = usb_serial_suspend, + .resume = usb_serial_resume, + .no_dynamic_id = 1, + .supports_autosuspend = 1, +}; + +static int __init usb_serial_init(void) +{ + int result; + + usb_serial_tty_driver = alloc_tty_driver(USB_SERIAL_TTY_MINORS); + if (!usb_serial_tty_driver) + return -ENOMEM; + + /* Initialize our global data */ + result = bus_register(&usb_serial_bus_type); + if (result) { + pr_err("%s - registering bus driver failed\n", __func__); + goto exit_bus; + } + + usb_serial_tty_driver->driver_name = "usbserial"; + usb_serial_tty_driver->name = "ttyUSB"; + usb_serial_tty_driver->major = USB_SERIAL_TTY_MAJOR; + usb_serial_tty_driver->minor_start = 0; + usb_serial_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; + usb_serial_tty_driver->subtype = SERIAL_TYPE_NORMAL; + usb_serial_tty_driver->flags = TTY_DRIVER_REAL_RAW | + TTY_DRIVER_DYNAMIC_DEV; + usb_serial_tty_driver->init_termios = tty_std_termios; + usb_serial_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD + | HUPCL | CLOCAL; + usb_serial_tty_driver->init_termios.c_ispeed = 9600; + usb_serial_tty_driver->init_termios.c_ospeed = 9600; + tty_set_operations(usb_serial_tty_driver, &serial_ops); + result = tty_register_driver(usb_serial_tty_driver); + if (result) { + pr_err("%s - tty_register_driver failed\n", __func__); + goto exit_reg_driver; + } + + /* register the USB driver */ + result = usb_register(&usb_serial_driver); + if (result < 0) { + pr_err("%s - usb_register failed\n", __func__); + goto exit_tty; + } + + /* register the generic driver, if we should */ + result = usb_serial_generic_register(); + if (result < 0) { + pr_err("%s - registering generic driver failed\n", __func__); + goto exit_generic; + } + + return result; + +exit_generic: + usb_deregister(&usb_serial_driver); + +exit_tty: + tty_unregister_driver(usb_serial_tty_driver); + +exit_reg_driver: + bus_unregister(&usb_serial_bus_type); + +exit_bus: + pr_err("%s - returning with error %d\n", __func__, result); + put_tty_driver(usb_serial_tty_driver); + return result; +} + + +static void __exit usb_serial_exit(void) +{ + usb_serial_console_exit(); + + usb_serial_generic_deregister(); + + usb_deregister(&usb_serial_driver); + tty_unregister_driver(usb_serial_tty_driver); + put_tty_driver(usb_serial_tty_driver); + bus_unregister(&usb_serial_bus_type); +} + + +module_init(usb_serial_init); +module_exit(usb_serial_exit); + +#define set_to_generic_if_null(type, function) \ + do { \ + if (!type->function) { \ + type->function = usb_serial_generic_##function; \ + pr_debug("%s: using generic " #function "\n", \ + type->driver.name); \ + } \ + } while (0) + +static void usb_serial_operations_init(struct usb_serial_driver *device) +{ + set_to_generic_if_null(device, open); + set_to_generic_if_null(device, write); + set_to_generic_if_null(device, close); + set_to_generic_if_null(device, write_room); + set_to_generic_if_null(device, chars_in_buffer); + if (device->tx_empty) + set_to_generic_if_null(device, wait_until_sent); + set_to_generic_if_null(device, read_bulk_callback); + set_to_generic_if_null(device, write_bulk_callback); + set_to_generic_if_null(device, process_read_urb); + set_to_generic_if_null(device, prepare_write_buffer); +} + +static int usb_serial_register(struct usb_serial_driver *driver) +{ + int retval; + + if (usb_disabled()) + return -ENODEV; + + if (!driver->description) + driver->description = driver->driver.name; + if (!driver->usb_driver) { + WARN(1, "Serial driver %s has no usb_driver\n", + driver->description); + return -EINVAL; + } + + usb_serial_operations_init(driver); + + /* Add this device to our list of devices */ + mutex_lock(&table_lock); + list_add(&driver->driver_list, &usb_serial_driver_list); + + retval = usb_serial_bus_register(driver); + if (retval) { + pr_err("problem %d when registering driver %s\n", retval, driver->description); + list_del(&driver->driver_list); + } else { + pr_info("USB Serial support registered for %s\n", driver->description); + } + mutex_unlock(&table_lock); + return retval; +} + +static void usb_serial_deregister(struct usb_serial_driver *device) +{ + pr_info("USB Serial deregistering driver %s\n", device->description); + + mutex_lock(&table_lock); + list_del(&device->driver_list); + mutex_unlock(&table_lock); + + usb_serial_bus_deregister(device); +} + +/** + * usb_serial_register_drivers - register drivers for a usb-serial module + * @serial_drivers: NULL-terminated array of pointers to drivers to be registered + * @name: name of the usb_driver for this set of @serial_drivers + * @id_table: list of all devices this @serial_drivers set binds to + * + * Registers all the drivers in the @serial_drivers array, and dynamically + * creates a struct usb_driver with the name @name and id_table of @id_table. + */ +int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[], + const char *name, + const struct usb_device_id *id_table) +{ + int rc; + struct usb_driver *udriver; + struct usb_serial_driver * const *sd; + + /* + * udriver must be registered before any of the serial drivers, + * because the store_new_id() routine for the serial drivers (in + * bus.c) probes udriver. + * + * Performance hack: We don't want udriver to be probed until + * the serial drivers are registered, because the probe would + * simply fail for lack of a matching serial driver. + * So we leave udriver's id_table set to NULL until we are all set. + * + * Suspend/resume support is implemented in the usb-serial core, + * so fill in the PM-related fields in udriver. + */ + udriver = kzalloc(sizeof(*udriver), GFP_KERNEL); + if (!udriver) + return -ENOMEM; + + udriver->name = name; + udriver->no_dynamic_id = 1; + udriver->supports_autosuspend = 1; + udriver->suspend = usb_serial_suspend; + udriver->resume = usb_serial_resume; + udriver->probe = usb_serial_probe; + udriver->disconnect = usb_serial_disconnect; + + /* we only set the reset_resume field if the serial_driver has one */ + for (sd = serial_drivers; *sd; ++sd) { + if ((*sd)->reset_resume) { + udriver->reset_resume = usb_serial_reset_resume; + break; + } + } + + rc = usb_register(udriver); + if (rc) + return rc; + + for (sd = serial_drivers; *sd; ++sd) { + (*sd)->usb_driver = udriver; + rc = usb_serial_register(*sd); + if (rc) + goto failed; + } + + /* Now set udriver's id_table and look for matches */ + udriver->id_table = id_table; + rc = driver_attach(&udriver->drvwrap.driver); + return 0; + + failed: + while (sd-- > serial_drivers) + usb_serial_deregister(*sd); + usb_deregister(udriver); + return rc; +} +EXPORT_SYMBOL_GPL(usb_serial_register_drivers); + +/** + * usb_serial_deregister_drivers - deregister drivers for a usb-serial module + * @serial_drivers: NULL-terminated array of pointers to drivers to be deregistered + * + * Deregisters all the drivers in the @serial_drivers array and deregisters and + * frees the struct usb_driver that was created by the call to + * usb_serial_register_drivers(). + */ +void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_drivers[]) +{ + struct usb_driver *udriver = (*serial_drivers)->usb_driver; + + for (; *serial_drivers; ++serial_drivers) + usb_serial_deregister(*serial_drivers); + usb_deregister(udriver); + kfree(udriver); +} +EXPORT_SYMBOL_GPL(usb_serial_deregister_drivers); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/usb-wwan.h b/kernel/drivers/usb/serial/usb-wwan.h new file mode 100644 index 000000000..f22dff58b --- /dev/null +++ b/kernel/drivers/usb/serial/usb-wwan.h @@ -0,0 +1,64 @@ +/* + * Definitions for USB serial mobile broadband cards + */ + +#ifndef __LINUX_USB_USB_WWAN +#define __LINUX_USB_USB_WWAN + +extern void usb_wwan_dtr_rts(struct usb_serial_port *port, int on); +extern int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port); +extern void usb_wwan_close(struct usb_serial_port *port); +extern int usb_wwan_port_probe(struct usb_serial_port *port); +extern int usb_wwan_port_remove(struct usb_serial_port *port); +extern int usb_wwan_write_room(struct tty_struct *tty); +extern int usb_wwan_tiocmget(struct tty_struct *tty); +extern int usb_wwan_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +extern int usb_wwan_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg); +extern int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count); +extern int usb_wwan_chars_in_buffer(struct tty_struct *tty); +#ifdef CONFIG_PM +extern int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message); +extern int usb_wwan_resume(struct usb_serial *serial); +#endif + +/* per port private data */ + +#define N_IN_URB 4 +#define N_OUT_URB 4 +#define IN_BUFLEN 4096 +#define OUT_BUFLEN 4096 + +struct usb_wwan_intf_private { + spinlock_t susp_lock; + unsigned int suspended:1; + int in_flight; + unsigned int open_ports; + int (*send_setup) (struct usb_serial_port *port); + void *private; +}; + +struct usb_wwan_port_private { + /* Input endpoints and buffer for this port */ + struct urb *in_urbs[N_IN_URB]; + u8 *in_buffer[N_IN_URB]; + /* Output endpoints and buffer for this port */ + struct urb *out_urbs[N_OUT_URB]; + u8 *out_buffer[N_OUT_URB]; + unsigned long out_busy; /* Bit vector of URBs in use */ + struct usb_anchor delayed; + + /* Settings for the port */ + int rts_state; /* Handshaking pins (outputs) */ + int dtr_state; + int cts_state; /* Handshaking pins (inputs) */ + int dsr_state; + int dcd_state; + int ri_state; + + unsigned long tx_start_time[N_OUT_URB]; +}; + +#endif /* __LINUX_USB_USB_WWAN */ diff --git a/kernel/drivers/usb/serial/usb_debug.c b/kernel/drivers/usb/serial/usb_debug.c new file mode 100644 index 000000000..ca2fa5bbe --- /dev/null +++ b/kernel/drivers/usb/serial/usb_debug.c @@ -0,0 +1,79 @@ +/* + * USB Debug cable driver + * + * Copyright (C) 2006 Greg Kroah-Hartman <greg@kroah.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/gfp.h> +#include <linux/kernel.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +#define USB_DEBUG_MAX_PACKET_SIZE 8 +#define USB_DEBUG_BRK_SIZE 8 +static char USB_DEBUG_BRK[USB_DEBUG_BRK_SIZE] = { + 0x00, + 0xff, + 0x01, + 0xfe, + 0x00, + 0xfe, + 0x01, + 0xff, +}; + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(0x0525, 0x127a) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* This HW really does not support a serial break, so one will be + * emulated when ever the break state is set to true. + */ +static void usb_debug_break_ctl(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + if (!break_state) + return; + usb_serial_generic_write(tty, port, USB_DEBUG_BRK, USB_DEBUG_BRK_SIZE); +} + +static void usb_debug_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + + if (urb->actual_length == USB_DEBUG_BRK_SIZE && + memcmp(urb->transfer_buffer, USB_DEBUG_BRK, + USB_DEBUG_BRK_SIZE) == 0) { + usb_serial_handle_break(port); + return; + } + + usb_serial_generic_process_read_urb(urb); +} + +static struct usb_serial_driver debug_device = { + .driver = { + .owner = THIS_MODULE, + .name = "debug", + }, + .id_table = id_table, + .num_ports = 1, + .bulk_out_size = USB_DEBUG_MAX_PACKET_SIZE, + .break_ctl = usb_debug_break_ctl, + .process_read_urb = usb_debug_process_read_urb, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &debug_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/usb_wwan.c b/kernel/drivers/usb/serial/usb_wwan.c new file mode 100644 index 000000000..2f805cb38 --- /dev/null +++ b/kernel/drivers/usb/serial/usb_wwan.c @@ -0,0 +1,695 @@ +/* + USB Driver layer for GSM modems + + Copyright (C) 2005 Matthias Urlichs <smurf@smurf.noris.de> + + This driver is free software; you can redistribute it and/or modify + it under the terms of Version 2 of the GNU General Public License as + published by the Free Software Foundation. + + Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org> + + History: see the git log. + + Work sponsored by: Sigos GmbH, Germany <info@sigos.de> + + This driver exists because the "normal" serial driver doesn't work too well + with GSM modems. Issues: + - data loss -- one single Receive URB is not nearly enough + - controlling the baud rate doesn't make sense +*/ + +#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>" +#define DRIVER_DESC "USB Driver for GSM modems" + +#include <linux/kernel.h> +#include <linux/jiffies.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/bitops.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/serial.h> +#include "usb-wwan.h" + +void usb_wwan_dtr_rts(struct usb_serial_port *port, int on) +{ + struct usb_wwan_port_private *portdata; + struct usb_wwan_intf_private *intfdata; + + intfdata = usb_get_serial_data(port->serial); + + if (!intfdata->send_setup) + return; + + portdata = usb_get_serial_port_data(port); + /* FIXME: locking */ + portdata->rts_state = on; + portdata->dtr_state = on; + + intfdata->send_setup(port); +} +EXPORT_SYMBOL(usb_wwan_dtr_rts); + +int usb_wwan_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned int value; + struct usb_wwan_port_private *portdata; + + portdata = usb_get_serial_port_data(port); + + value = ((portdata->rts_state) ? TIOCM_RTS : 0) | + ((portdata->dtr_state) ? TIOCM_DTR : 0) | + ((portdata->cts_state) ? TIOCM_CTS : 0) | + ((portdata->dsr_state) ? TIOCM_DSR : 0) | + ((portdata->dcd_state) ? TIOCM_CAR : 0) | + ((portdata->ri_state) ? TIOCM_RNG : 0); + + return value; +} +EXPORT_SYMBOL(usb_wwan_tiocmget); + +int usb_wwan_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_wwan_port_private *portdata; + struct usb_wwan_intf_private *intfdata; + + portdata = usb_get_serial_port_data(port); + intfdata = usb_get_serial_data(port->serial); + + if (!intfdata->send_setup) + return -EINVAL; + + /* FIXME: what locks portdata fields ? */ + if (set & TIOCM_RTS) + portdata->rts_state = 1; + if (set & TIOCM_DTR) + portdata->dtr_state = 1; + + if (clear & TIOCM_RTS) + portdata->rts_state = 0; + if (clear & TIOCM_DTR) + portdata->dtr_state = 0; + return intfdata->send_setup(port); +} +EXPORT_SYMBOL(usb_wwan_tiocmset); + +static int get_serial_info(struct usb_serial_port *port, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp; + + if (!retinfo) + return -EFAULT; + + memset(&tmp, 0, sizeof(tmp)); + tmp.line = port->minor; + tmp.port = port->port_number; + tmp.baud_base = tty_get_baud_rate(port->port.tty); + tmp.close_delay = port->port.close_delay / 10; + tmp.closing_wait = port->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ? + ASYNC_CLOSING_WAIT_NONE : + port->port.closing_wait / 10; + + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int set_serial_info(struct usb_serial_port *port, + struct serial_struct __user *newinfo) +{ + struct serial_struct new_serial; + unsigned int closing_wait, close_delay; + int retval = 0; + + if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) + return -EFAULT; + + close_delay = new_serial.close_delay * 10; + closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ? + ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10; + + mutex_lock(&port->port.mutex); + + if (!capable(CAP_SYS_ADMIN)) { + if ((close_delay != port->port.close_delay) || + (closing_wait != port->port.closing_wait)) + retval = -EPERM; + else + retval = -EOPNOTSUPP; + } else { + port->port.close_delay = close_delay; + port->port.closing_wait = closing_wait; + } + + mutex_unlock(&port->port.mutex); + return retval; +} + +int usb_wwan_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + + dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd); + + switch (cmd) { + case TIOCGSERIAL: + return get_serial_info(port, + (struct serial_struct __user *) arg); + case TIOCSSERIAL: + return set_serial_info(port, + (struct serial_struct __user *) arg); + default: + break; + } + + dev_dbg(&port->dev, "%s arg not supported\n", __func__); + + return -ENOIOCTLCMD; +} +EXPORT_SYMBOL(usb_wwan_ioctl); + +int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + struct usb_wwan_port_private *portdata; + struct usb_wwan_intf_private *intfdata; + int i; + int left, todo; + struct urb *this_urb = NULL; /* spurious */ + int err; + unsigned long flags; + + portdata = usb_get_serial_port_data(port); + intfdata = usb_get_serial_data(port->serial); + + dev_dbg(&port->dev, "%s: write (%d chars)\n", __func__, count); + + i = 0; + left = count; + for (i = 0; left > 0 && i < N_OUT_URB; i++) { + todo = left; + if (todo > OUT_BUFLEN) + todo = OUT_BUFLEN; + + this_urb = portdata->out_urbs[i]; + if (test_and_set_bit(i, &portdata->out_busy)) { + if (time_before(jiffies, + portdata->tx_start_time[i] + 10 * HZ)) + continue; + usb_unlink_urb(this_urb); + continue; + } + dev_dbg(&port->dev, "%s: endpoint %d buf %d\n", __func__, + usb_pipeendpoint(this_urb->pipe), i); + + err = usb_autopm_get_interface_async(port->serial->interface); + if (err < 0) { + clear_bit(i, &portdata->out_busy); + break; + } + + /* send the data */ + memcpy(this_urb->transfer_buffer, buf, todo); + this_urb->transfer_buffer_length = todo; + + spin_lock_irqsave(&intfdata->susp_lock, flags); + if (intfdata->suspended) { + usb_anchor_urb(this_urb, &portdata->delayed); + spin_unlock_irqrestore(&intfdata->susp_lock, flags); + } else { + intfdata->in_flight++; + spin_unlock_irqrestore(&intfdata->susp_lock, flags); + err = usb_submit_urb(this_urb, GFP_ATOMIC); + if (err) { + dev_err(&port->dev, + "%s: submit urb %d failed: %d\n", + __func__, i, err); + clear_bit(i, &portdata->out_busy); + spin_lock_irqsave(&intfdata->susp_lock, flags); + intfdata->in_flight--; + spin_unlock_irqrestore(&intfdata->susp_lock, + flags); + usb_autopm_put_interface_async(port->serial->interface); + break; + } + } + + portdata->tx_start_time[i] = jiffies; + buf += todo; + left -= todo; + } + + count -= left; + dev_dbg(&port->dev, "%s: wrote (did %d)\n", __func__, count); + return count; +} +EXPORT_SYMBOL(usb_wwan_write); + +static void usb_wwan_indat_callback(struct urb *urb) +{ + int err; + int endpoint; + struct usb_serial_port *port; + struct device *dev; + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + + endpoint = usb_pipeendpoint(urb->pipe); + port = urb->context; + dev = &port->dev; + + if (status) { + dev_dbg(dev, "%s: nonzero status: %d on endpoint %02x.\n", + __func__, status, endpoint); + } else { + if (urb->actual_length) { + tty_insert_flip_string(&port->port, data, + urb->actual_length); + tty_flip_buffer_push(&port->port); + } else + dev_dbg(dev, "%s: empty read urb received\n", __func__); + } + /* Resubmit urb so we continue receiving */ + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) { + if (err != -EPERM) { + dev_err(dev, "%s: resubmit read urb failed. (%d)\n", + __func__, err); + /* busy also in error unless we are killed */ + usb_mark_last_busy(port->serial->dev); + } + } else { + usb_mark_last_busy(port->serial->dev); + } +} + +static void usb_wwan_outdat_callback(struct urb *urb) +{ + struct usb_serial_port *port; + struct usb_wwan_port_private *portdata; + struct usb_wwan_intf_private *intfdata; + int i; + + port = urb->context; + intfdata = usb_get_serial_data(port->serial); + + usb_serial_port_softint(port); + usb_autopm_put_interface_async(port->serial->interface); + portdata = usb_get_serial_port_data(port); + spin_lock(&intfdata->susp_lock); + intfdata->in_flight--; + spin_unlock(&intfdata->susp_lock); + + for (i = 0; i < N_OUT_URB; ++i) { + if (portdata->out_urbs[i] == urb) { + smp_mb__before_atomic(); + clear_bit(i, &portdata->out_busy); + break; + } + } +} + +int usb_wwan_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_wwan_port_private *portdata; + int i; + int data_len = 0; + struct urb *this_urb; + + portdata = usb_get_serial_port_data(port); + + for (i = 0; i < N_OUT_URB; i++) { + this_urb = portdata->out_urbs[i]; + if (this_urb && !test_bit(i, &portdata->out_busy)) + data_len += OUT_BUFLEN; + } + + dev_dbg(&port->dev, "%s: %d\n", __func__, data_len); + return data_len; +} +EXPORT_SYMBOL(usb_wwan_write_room); + +int usb_wwan_chars_in_buffer(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_wwan_port_private *portdata; + int i; + int data_len = 0; + struct urb *this_urb; + + portdata = usb_get_serial_port_data(port); + + for (i = 0; i < N_OUT_URB; i++) { + this_urb = portdata->out_urbs[i]; + /* FIXME: This locking is insufficient as this_urb may + go unused during the test */ + if (this_urb && test_bit(i, &portdata->out_busy)) + data_len += this_urb->transfer_buffer_length; + } + dev_dbg(&port->dev, "%s: %d\n", __func__, data_len); + return data_len; +} +EXPORT_SYMBOL(usb_wwan_chars_in_buffer); + +int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct usb_wwan_port_private *portdata; + struct usb_wwan_intf_private *intfdata; + struct usb_serial *serial = port->serial; + int i, err; + struct urb *urb; + + portdata = usb_get_serial_port_data(port); + intfdata = usb_get_serial_data(serial); + + if (port->interrupt_in_urb) { + err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (err) { + dev_err(&port->dev, "%s: submit int urb failed: %d\n", + __func__, err); + } + } + + /* Start reading from the IN endpoint */ + for (i = 0; i < N_IN_URB; i++) { + urb = portdata->in_urbs[i]; + if (!urb) + continue; + err = usb_submit_urb(urb, GFP_KERNEL); + if (err) { + dev_err(&port->dev, + "%s: submit read urb %d failed: %d\n", + __func__, i, err); + } + } + + spin_lock_irq(&intfdata->susp_lock); + if (++intfdata->open_ports == 1) + serial->interface->needs_remote_wakeup = 1; + spin_unlock_irq(&intfdata->susp_lock); + /* this balances a get in the generic USB serial code */ + usb_autopm_put_interface(serial->interface); + + return 0; +} +EXPORT_SYMBOL(usb_wwan_open); + +static void unbusy_queued_urb(struct urb *urb, + struct usb_wwan_port_private *portdata) +{ + int i; + + for (i = 0; i < N_OUT_URB; i++) { + if (urb == portdata->out_urbs[i]) { + clear_bit(i, &portdata->out_busy); + break; + } + } +} + +void usb_wwan_close(struct usb_serial_port *port) +{ + int i; + struct usb_serial *serial = port->serial; + struct usb_wwan_port_private *portdata; + struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial); + struct urb *urb; + + portdata = usb_get_serial_port_data(port); + + /* + * Need to take susp_lock to make sure port is not already being + * resumed, but no need to hold it due to ASYNC_INITIALIZED. + */ + spin_lock_irq(&intfdata->susp_lock); + if (--intfdata->open_ports == 0) + serial->interface->needs_remote_wakeup = 0; + spin_unlock_irq(&intfdata->susp_lock); + + for (;;) { + urb = usb_get_from_anchor(&portdata->delayed); + if (!urb) + break; + unbusy_queued_urb(urb, portdata); + usb_autopm_put_interface_async(serial->interface); + } + + for (i = 0; i < N_IN_URB; i++) + usb_kill_urb(portdata->in_urbs[i]); + for (i = 0; i < N_OUT_URB; i++) + usb_kill_urb(portdata->out_urbs[i]); + usb_kill_urb(port->interrupt_in_urb); + + usb_autopm_get_interface_no_resume(serial->interface); +} +EXPORT_SYMBOL(usb_wwan_close); + +static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port, + int endpoint, + int dir, void *ctx, char *buf, int len, + void (*callback) (struct urb *)) +{ + struct usb_serial *serial = port->serial; + struct urb *urb; + + urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ + if (!urb) + return NULL; + + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, endpoint) | dir, + buf, len, callback, ctx); + + return urb; +} + +int usb_wwan_port_probe(struct usb_serial_port *port) +{ + struct usb_wwan_port_private *portdata; + struct urb *urb; + u8 *buffer; + int i; + + if (!port->bulk_in_size || !port->bulk_out_size) + return -ENODEV; + + portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); + if (!portdata) + return -ENOMEM; + + init_usb_anchor(&portdata->delayed); + + for (i = 0; i < N_IN_URB; i++) { + buffer = (u8 *)__get_free_page(GFP_KERNEL); + if (!buffer) + goto bail_out_error; + portdata->in_buffer[i] = buffer; + + urb = usb_wwan_setup_urb(port, port->bulk_in_endpointAddress, + USB_DIR_IN, port, + buffer, IN_BUFLEN, + usb_wwan_indat_callback); + portdata->in_urbs[i] = urb; + } + + for (i = 0; i < N_OUT_URB; i++) { + buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL); + if (!buffer) + goto bail_out_error2; + portdata->out_buffer[i] = buffer; + + urb = usb_wwan_setup_urb(port, port->bulk_out_endpointAddress, + USB_DIR_OUT, port, + buffer, OUT_BUFLEN, + usb_wwan_outdat_callback); + portdata->out_urbs[i] = urb; + } + + usb_set_serial_port_data(port, portdata); + + return 0; + +bail_out_error2: + for (i = 0; i < N_OUT_URB; i++) { + usb_free_urb(portdata->out_urbs[i]); + kfree(portdata->out_buffer[i]); + } +bail_out_error: + for (i = 0; i < N_IN_URB; i++) { + usb_free_urb(portdata->in_urbs[i]); + free_page((unsigned long)portdata->in_buffer[i]); + } + kfree(portdata); + + return -ENOMEM; +} +EXPORT_SYMBOL_GPL(usb_wwan_port_probe); + +int usb_wwan_port_remove(struct usb_serial_port *port) +{ + int i; + struct usb_wwan_port_private *portdata; + + portdata = usb_get_serial_port_data(port); + usb_set_serial_port_data(port, NULL); + + for (i = 0; i < N_IN_URB; i++) { + usb_free_urb(portdata->in_urbs[i]); + free_page((unsigned long)portdata->in_buffer[i]); + } + for (i = 0; i < N_OUT_URB; i++) { + usb_free_urb(portdata->out_urbs[i]); + kfree(portdata->out_buffer[i]); + } + + kfree(portdata); + + return 0; +} +EXPORT_SYMBOL(usb_wwan_port_remove); + +#ifdef CONFIG_PM +static void stop_urbs(struct usb_serial *serial) +{ + int i, j; + struct usb_serial_port *port; + struct usb_wwan_port_private *portdata; + + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); + if (!portdata) + continue; + for (j = 0; j < N_IN_URB; j++) + usb_kill_urb(portdata->in_urbs[j]); + for (j = 0; j < N_OUT_URB; j++) + usb_kill_urb(portdata->out_urbs[j]); + usb_kill_urb(port->interrupt_in_urb); + } +} + +int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message) +{ + struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial); + + spin_lock_irq(&intfdata->susp_lock); + if (PMSG_IS_AUTO(message)) { + if (intfdata->in_flight) { + spin_unlock_irq(&intfdata->susp_lock); + return -EBUSY; + } + } + intfdata->suspended = 1; + spin_unlock_irq(&intfdata->susp_lock); + + stop_urbs(serial); + + return 0; +} +EXPORT_SYMBOL(usb_wwan_suspend); + +/* Caller must hold susp_lock. */ +static int usb_wwan_submit_delayed_urbs(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct usb_wwan_intf_private *data = usb_get_serial_data(serial); + struct usb_wwan_port_private *portdata; + struct urb *urb; + int err_count = 0; + int err; + + portdata = usb_get_serial_port_data(port); + + for (;;) { + urb = usb_get_from_anchor(&portdata->delayed); + if (!urb) + break; + + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err) { + dev_err(&port->dev, "%s: submit urb failed: %d\n", + __func__, err); + err_count++; + unbusy_queued_urb(urb, portdata); + usb_autopm_put_interface_async(serial->interface); + continue; + } + data->in_flight++; + } + + if (err_count) + return -EIO; + + return 0; +} + +int usb_wwan_resume(struct usb_serial *serial) +{ + int i, j; + struct usb_serial_port *port; + struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial); + struct usb_wwan_port_private *portdata; + struct urb *urb; + int err; + int err_count = 0; + + spin_lock_irq(&intfdata->susp_lock); + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + + if (!test_bit(ASYNCB_INITIALIZED, &port->port.flags)) + continue; + + portdata = usb_get_serial_port_data(port); + + if (port->interrupt_in_urb) { + err = usb_submit_urb(port->interrupt_in_urb, + GFP_ATOMIC); + if (err) { + dev_err(&port->dev, + "%s: submit int urb failed: %d\n", + __func__, err); + err_count++; + } + } + + err = usb_wwan_submit_delayed_urbs(port); + if (err) + err_count++; + + for (j = 0; j < N_IN_URB; j++) { + urb = portdata->in_urbs[j]; + err = usb_submit_urb(urb, GFP_ATOMIC); + if (err < 0) { + dev_err(&port->dev, + "%s: submit read urb %d failed: %d\n", + __func__, i, err); + err_count++; + } + } + } + intfdata->suspended = 0; + spin_unlock_irq(&intfdata->susp_lock); + + if (err_count) + return -EIO; + + return 0; +} +EXPORT_SYMBOL(usb_wwan_resume); +#endif + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/visor.c b/kernel/drivers/usb/serial/visor.c new file mode 100644 index 000000000..60afb39eb --- /dev/null +++ b/kernel/drivers/usb/serial/visor.c @@ -0,0 +1,619 @@ +/* + * USB HandSpring Visor, Palm m50x, and Sony Clie driver + * (supports all of the Palm OS USB devices) + * + * Copyright (C) 1999 - 2004 + * Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * See Documentation/usb/usb-serial.txt for more information on using this + * driver + * + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/usb/cdc.h> +#include "visor.h" + +/* + * Version Information + */ +#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>" +#define DRIVER_DESC "USB HandSpring Visor / Palm OS driver" + +/* function prototypes for a handspring visor */ +static int visor_open(struct tty_struct *tty, struct usb_serial_port *port); +static void visor_close(struct usb_serial_port *port); +static int visor_probe(struct usb_serial *serial, + const struct usb_device_id *id); +static int visor_calc_num_ports(struct usb_serial *serial); +static void visor_read_int_callback(struct urb *urb); +static int clie_3_5_startup(struct usb_serial *serial); +static int treo_attach(struct usb_serial *serial); +static int clie_5_attach(struct usb_serial *serial); +static int palm_os_3_probe(struct usb_serial *serial, + const struct usb_device_id *id); +static int palm_os_4_probe(struct usb_serial *serial, + const struct usb_device_id *id); + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID), + .driver_info = (kernel_ulong_t)&palm_os_3_probe }, + { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_I705_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M100_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M130_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_TREO_650), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_Z_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_S360_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NX60_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(ACER_VENDOR_ID, ACER_S10_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE_INTERFACE_CLASS(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID, 0xff), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(TAPWAVE_VENDOR_ID, TAPWAVE_ZODIAC_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_7135_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(FOSSIL_VENDOR_ID, FOSSIL_ABACUS_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id clie_id_5_table[] = { + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_UX50_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id clie_id_3_5_table[] = { + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id id_table_combined[] = { + { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) }, + { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID) }, + { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID) }, + { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_I705_ID) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M100_ID) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M130_ID) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_TREO_650) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_Z_ID) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID) }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID) }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_S360_ID) }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID) }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NX60_ID) }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID) }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_UX50_ID) }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID) }, + { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID) }, + { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID) }, + { USB_DEVICE(TAPWAVE_VENDOR_ID, TAPWAVE_ZODIAC_ID) }, + { USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID) }, + { USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID) }, + { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_7135_ID) }, + { USB_DEVICE(FOSSIL_VENDOR_ID, FOSSIL_ABACUS_ID) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table_combined); + +/* All of the device info needed for the Handspring Visor, + and Palm 4.0 devices */ +static struct usb_serial_driver handspring_device = { + .driver = { + .owner = THIS_MODULE, + .name = "visor", + }, + .description = "Handspring Visor / Palm OS", + .id_table = id_table, + .num_ports = 2, + .bulk_out_size = 256, + .open = visor_open, + .close = visor_close, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, + .attach = treo_attach, + .probe = visor_probe, + .calc_num_ports = visor_calc_num_ports, + .read_int_callback = visor_read_int_callback, +}; + +/* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */ +static struct usb_serial_driver clie_5_device = { + .driver = { + .owner = THIS_MODULE, + .name = "clie_5", + }, + .description = "Sony Clie 5.0", + .id_table = clie_id_5_table, + .num_ports = 2, + .bulk_out_size = 256, + .open = visor_open, + .close = visor_close, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, + .attach = clie_5_attach, + .probe = visor_probe, + .calc_num_ports = visor_calc_num_ports, + .read_int_callback = visor_read_int_callback, +}; + +/* device info for the Sony Clie OS version 3.5 */ +static struct usb_serial_driver clie_3_5_device = { + .driver = { + .owner = THIS_MODULE, + .name = "clie_3.5", + }, + .description = "Sony Clie 3.5", + .id_table = clie_id_3_5_table, + .num_ports = 1, + .bulk_out_size = 256, + .open = visor_open, + .close = visor_close, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, + .attach = clie_3_5_startup, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &handspring_device, &clie_5_device, &clie_3_5_device, NULL +}; + +/****************************************************************************** + * Handspring Visor specific driver functions + ******************************************************************************/ +static int visor_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + int result = 0; + + if (!port->read_urb) { + /* this is needed for some brain dead Sony devices */ + dev_err(&port->dev, "Device lied about number of ports, please use a lower one.\n"); + return -ENODEV; + } + + /* Start reading from the device */ + result = usb_serial_generic_open(tty, port); + if (result) + goto exit; + + if (port->interrupt_in_urb) { + dev_dbg(&port->dev, "adding interrupt input for treo\n"); + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result) + dev_err(&port->dev, + "%s - failed submitting interrupt urb, error %d\n", + __func__, result); + } +exit: + return result; +} + + +static void visor_close(struct usb_serial_port *port) +{ + unsigned char *transfer_buffer; + + usb_serial_generic_close(port); + usb_kill_urb(port->interrupt_in_urb); + + transfer_buffer = kmalloc(0x12, GFP_KERNEL); + if (!transfer_buffer) + return; + usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + VISOR_CLOSE_NOTIFICATION, 0xc2, + 0x0000, 0x0000, + transfer_buffer, 0x12, 300); + kfree(transfer_buffer); +} + +static void visor_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + int status = urb->status; + int result; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", + __func__, status); + goto exit; + } + + /* + * This information is still unknown what it can be used for. + * If anyone has an idea, please let the author know... + * + * Rumor has it this endpoint is used to notify when data + * is ready to be read from the bulk ones. + */ + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, + urb->transfer_buffer); + +exit: + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) + dev_err(&urb->dev->dev, + "%s - Error %d submitting interrupt urb\n", + __func__, result); +} + +static int palm_os_3_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + struct device *dev = &serial->dev->dev; + struct visor_connection_info *connection_info; + unsigned char *transfer_buffer; + char *string; + int retval = 0; + int i; + int num_ports = 0; + + transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL); + if (!transfer_buffer) + return -ENOMEM; + + /* send a get connection info request */ + retval = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + VISOR_GET_CONNECTION_INFORMATION, + 0xc2, 0x0000, 0x0000, transfer_buffer, + sizeof(*connection_info), 300); + if (retval < 0) { + dev_err(dev, "%s - error %d getting connection information\n", + __func__, retval); + goto exit; + } + + if (retval == sizeof(*connection_info)) { + connection_info = (struct visor_connection_info *) + transfer_buffer; + + num_ports = le16_to_cpu(connection_info->num_ports); + for (i = 0; i < num_ports; ++i) { + switch ( + connection_info->connections[i].port_function_id) { + case VISOR_FUNCTION_GENERIC: + string = "Generic"; + break; + case VISOR_FUNCTION_DEBUGGER: + string = "Debugger"; + break; + case VISOR_FUNCTION_HOTSYNC: + string = "HotSync"; + break; + case VISOR_FUNCTION_CONSOLE: + string = "Console"; + break; + case VISOR_FUNCTION_REMOTE_FILE_SYS: + string = "Remote File System"; + break; + default: + string = "unknown"; + break; + } + dev_info(dev, "%s: port %d, is for %s use\n", + serial->type->description, + connection_info->connections[i].port, string); + } + } + /* + * Handle devices that report invalid stuff here. + */ + if (num_ports == 0 || num_ports > 2) { + dev_warn(dev, "%s: No valid connect info available\n", + serial->type->description); + num_ports = 2; + } + + dev_info(dev, "%s: Number of ports: %d\n", serial->type->description, + num_ports); + + /* + * save off our num_ports info so that we can use it in the + * calc_num_ports callback + */ + usb_set_serial_data(serial, (void *)(long)num_ports); + + /* ask for the number of bytes available, but ignore the + response as it is broken */ + retval = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + VISOR_REQUEST_BYTES_AVAILABLE, + 0xc2, 0x0000, 0x0005, transfer_buffer, + 0x02, 300); + if (retval < 0) + dev_err(dev, "%s - error %d getting bytes available request\n", + __func__, retval); + retval = 0; + +exit: + kfree(transfer_buffer); + + return retval; +} + +static int palm_os_4_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + struct device *dev = &serial->dev->dev; + struct palm_ext_connection_info *connection_info; + unsigned char *transfer_buffer; + int retval; + + transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL); + if (!transfer_buffer) + return -ENOMEM; + + retval = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + PALM_GET_EXT_CONNECTION_INFORMATION, + 0xc2, 0x0000, 0x0000, transfer_buffer, + sizeof(*connection_info), 300); + if (retval < 0) + dev_err(dev, "%s - error %d getting connection info\n", + __func__, retval); + else + usb_serial_debug_data(dev, __func__, retval, transfer_buffer); + + kfree(transfer_buffer); + return 0; +} + + +static int visor_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + int retval = 0; + int (*startup)(struct usb_serial *serial, + const struct usb_device_id *id); + + /* + * some Samsung Android phones in modem mode have the same ID + * as SPH-I500, but they are ACM devices, so dont bind to them + */ + if (id->idVendor == SAMSUNG_VENDOR_ID && + id->idProduct == SAMSUNG_SPH_I500_ID && + serial->dev->descriptor.bDeviceClass == USB_CLASS_COMM && + serial->dev->descriptor.bDeviceSubClass == + USB_CDC_SUBCLASS_ACM) + return -ENODEV; + + if (serial->dev->actconfig->desc.bConfigurationValue != 1) { + dev_err(&serial->dev->dev, "active config #%d != 1 ??\n", + serial->dev->actconfig->desc.bConfigurationValue); + return -ENODEV; + } + + if (id->driver_info) { + startup = (void *)id->driver_info; + retval = startup(serial, id); + } + + return retval; +} + +static int visor_calc_num_ports(struct usb_serial *serial) +{ + int num_ports = (int)(long)(usb_get_serial_data(serial)); + + if (num_ports) + usb_set_serial_data(serial, NULL); + + return num_ports; +} + +static int clie_3_5_startup(struct usb_serial *serial) +{ + struct device *dev = &serial->dev->dev; + int result; + u8 *data; + + data = kmalloc(1, GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* + * Note that PEG-300 series devices expect the following two calls. + */ + + /* get the config number */ + result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + USB_REQ_GET_CONFIGURATION, USB_DIR_IN, + 0, 0, data, 1, 3000); + if (result < 0) { + dev_err(dev, "%s: get config number failed: %d\n", + __func__, result); + goto out; + } + if (result != 1) { + dev_err(dev, "%s: get config number bad return length: %d\n", + __func__, result); + result = -EIO; + goto out; + } + + /* get the interface number */ + result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + USB_REQ_GET_INTERFACE, + USB_DIR_IN | USB_RECIP_INTERFACE, + 0, 0, data, 1, 3000); + if (result < 0) { + dev_err(dev, "%s: get interface number failed: %d\n", + __func__, result); + goto out; + } + if (result != 1) { + dev_err(dev, + "%s: get interface number bad return length: %d\n", + __func__, result); + result = -EIO; + goto out; + } + + result = 0; +out: + kfree(data); + + return result; +} + +static int treo_attach(struct usb_serial *serial) +{ + struct usb_serial_port *swap_port; + + /* Only do this endpoint hack for the Handspring devices with + * interrupt in endpoints, which for now are the Treo devices. */ + if (!((le16_to_cpu(serial->dev->descriptor.idVendor) + == HANDSPRING_VENDOR_ID) || + (le16_to_cpu(serial->dev->descriptor.idVendor) + == KYOCERA_VENDOR_ID)) || + (serial->num_interrupt_in == 0)) + return 0; + + /* + * It appears that Treos and Kyoceras want to use the + * 1st bulk in endpoint to communicate with the 2nd bulk out endpoint, + * so let's swap the 1st and 2nd bulk in and interrupt endpoints. + * Note that swapping the bulk out endpoints would break lots of + * apps that want to communicate on the second port. + */ +#define COPY_PORT(dest, src) \ + do { \ + int i; \ + \ + for (i = 0; i < ARRAY_SIZE(src->read_urbs); ++i) { \ + dest->read_urbs[i] = src->read_urbs[i]; \ + dest->read_urbs[i]->context = dest; \ + dest->bulk_in_buffers[i] = src->bulk_in_buffers[i]; \ + } \ + dest->read_urb = src->read_urb; \ + dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\ + dest->bulk_in_buffer = src->bulk_in_buffer; \ + dest->bulk_in_size = src->bulk_in_size; \ + dest->interrupt_in_urb = src->interrupt_in_urb; \ + dest->interrupt_in_urb->context = dest; \ + dest->interrupt_in_endpointAddress = \ + src->interrupt_in_endpointAddress;\ + dest->interrupt_in_buffer = src->interrupt_in_buffer; \ + } while (0); + + swap_port = kmalloc(sizeof(*swap_port), GFP_KERNEL); + if (!swap_port) + return -ENOMEM; + COPY_PORT(swap_port, serial->port[0]); + COPY_PORT(serial->port[0], serial->port[1]); + COPY_PORT(serial->port[1], swap_port); + kfree(swap_port); + + return 0; +} + +static int clie_5_attach(struct usb_serial *serial) +{ + struct usb_serial_port *port; + unsigned int pipe; + int j; + + /* TH55 registers 2 ports. + Communication in from the UX50/TH55 uses bulk_in_endpointAddress + from port 0. Communication out to the UX50/TH55 uses + bulk_out_endpointAddress from port 1 + + Lets do a quick and dirty mapping + */ + + /* some sanity check */ + if (serial->num_ports < 2) + return -1; + + /* port 0 now uses the modified endpoint Address */ + port = serial->port[0]; + port->bulk_out_endpointAddress = + serial->port[1]->bulk_out_endpointAddress; + + pipe = usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress); + for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) + port->write_urbs[j]->pipe = pipe; + + return 0; +} + +module_usb_serial_driver(serial_drivers, id_table_combined); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/visor.h b/kernel/drivers/usb/serial/visor.h new file mode 100644 index 000000000..4c456dd69 --- /dev/null +++ b/kernel/drivers/usb/serial/visor.h @@ -0,0 +1,161 @@ +/* + * USB HandSpring Visor driver + * + * Copyright (C) 1999 - 2003 + * Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * See Documentation/usb/usb-serial.txt for more information on using this + * driver. + * + */ + +#ifndef __LINUX_USB_SERIAL_VISOR_H +#define __LINUX_USB_SERIAL_VISOR_H + + +#define HANDSPRING_VENDOR_ID 0x082d +#define HANDSPRING_VISOR_ID 0x0100 +#define HANDSPRING_TREO_ID 0x0200 +#define HANDSPRING_TREO600_ID 0x0300 + +#define PALM_VENDOR_ID 0x0830 +#define PALM_M500_ID 0x0001 +#define PALM_M505_ID 0x0002 +#define PALM_M515_ID 0x0003 +#define PALM_I705_ID 0x0020 +#define PALM_M125_ID 0x0040 +#define PALM_M130_ID 0x0050 +#define PALM_TUNGSTEN_T_ID 0x0060 +#define PALM_TREO_650 0x0061 +#define PALM_TUNGSTEN_Z_ID 0x0031 +#define PALM_ZIRE_ID 0x0070 +#define PALM_M100_ID 0x0080 + +#define GSPDA_VENDOR_ID 0x115e +#define GSPDA_XPLORE_M68_ID 0xf100 + +#define SONY_VENDOR_ID 0x054C +#define SONY_CLIE_3_5_ID 0x0038 +#define SONY_CLIE_4_0_ID 0x0066 +#define SONY_CLIE_S360_ID 0x0095 +#define SONY_CLIE_4_1_ID 0x009A +#define SONY_CLIE_NX60_ID 0x00DA +#define SONY_CLIE_NZ90V_ID 0x00E9 +#define SONY_CLIE_UX50_ID 0x0144 +#define SONY_CLIE_TJ25_ID 0x0169 + +#define ACER_VENDOR_ID 0x0502 +#define ACER_S10_ID 0x0001 + +#define SAMSUNG_VENDOR_ID 0x04E8 +#define SAMSUNG_SCH_I330_ID 0x8001 +#define SAMSUNG_SPH_I500_ID 0x6601 + +#define TAPWAVE_VENDOR_ID 0x12EF +#define TAPWAVE_ZODIAC_ID 0x0100 + +#define GARMIN_VENDOR_ID 0x091E +#define GARMIN_IQUE_3600_ID 0x0004 + +#define ACEECA_VENDOR_ID 0x4766 +#define ACEECA_MEZ1000_ID 0x0001 + +#define KYOCERA_VENDOR_ID 0x0C88 +#define KYOCERA_7135_ID 0x0021 + +#define FOSSIL_VENDOR_ID 0x0E67 +#define FOSSIL_ABACUS_ID 0x0002 + +/**************************************************************************** + * Handspring Visor Vendor specific request codes (bRequest values) + * A big thank you to Handspring for providing the following information. + * If anyone wants the original file where these values and structures came + * from, send email to <greg@kroah.com>. + ****************************************************************************/ + +/**************************************************************************** + * VISOR_REQUEST_BYTES_AVAILABLE asks the visor for the number of bytes that + * are available to be transferred to the host for the specified endpoint. + * Currently this is not used, and always returns 0x0001 + ****************************************************************************/ +#define VISOR_REQUEST_BYTES_AVAILABLE 0x01 + +/**************************************************************************** + * VISOR_CLOSE_NOTIFICATION is set to the device to notify it that the host + * is now closing the pipe. An empty packet is sent in response. + ****************************************************************************/ +#define VISOR_CLOSE_NOTIFICATION 0x02 + +/**************************************************************************** + * VISOR_GET_CONNECTION_INFORMATION is sent by the host during enumeration to + * get the endpoints used by the connection. + ****************************************************************************/ +#define VISOR_GET_CONNECTION_INFORMATION 0x03 + + +/**************************************************************************** + * VISOR_GET_CONNECTION_INFORMATION returns data in the following format + ****************************************************************************/ +struct visor_connection_info { + __le16 num_ports; + struct { + __u8 port_function_id; + __u8 port; + } connections[2]; +}; + + +/* struct visor_connection_info.connection[x].port defines: */ +#define VISOR_ENDPOINT_1 0x01 +#define VISOR_ENDPOINT_2 0x02 + +/* struct visor_connection_info.connection[x].port_function_id defines: */ +#define VISOR_FUNCTION_GENERIC 0x00 +#define VISOR_FUNCTION_DEBUGGER 0x01 +#define VISOR_FUNCTION_HOTSYNC 0x02 +#define VISOR_FUNCTION_CONSOLE 0x03 +#define VISOR_FUNCTION_REMOTE_FILE_SYS 0x04 + + +/**************************************************************************** + * PALM_GET_SOME_UNKNOWN_INFORMATION is sent by the host during enumeration to + * get some information from the M series devices, that is currently unknown. + ****************************************************************************/ +#define PALM_GET_EXT_CONNECTION_INFORMATION 0x04 + +/** + * struct palm_ext_connection_info - return data from a PALM_GET_EXT_CONNECTION_INFORMATION request + * @num_ports: maximum number of functions/connections in use + * @endpoint_numbers_different: will be 1 if in and out endpoints numbers are + * different, otherwise it is 0. If value is 1, then + * connections.end_point_info is non-zero. If value is 0, then + * connections.port contains the endpoint number, which is the same for in + * and out. + * @port_function_id: contains the creator id of the application that opened + * this connection. + * @port: contains the in/out endpoint number. Is 0 if in and out endpoint + * numbers are different. + * @end_point_info: high nubbe is in endpoint and low nibble will indicate out + * endpoint. Is 0 if in and out endpoints are the same. + * + * The maximum number of connections currently supported is 2 + */ +struct palm_ext_connection_info { + __u8 num_ports; + __u8 endpoint_numbers_different; + __le16 reserved1; + struct { + __u32 port_function_id; + __u8 port; + __u8 end_point_info; + __le16 reserved; + } connections[2]; +}; + +#endif + diff --git a/kernel/drivers/usb/serial/whiteheat.c b/kernel/drivers/usb/serial/whiteheat.c new file mode 100644 index 000000000..6c3734d2b --- /dev/null +++ b/kernel/drivers/usb/serial/whiteheat.c @@ -0,0 +1,840 @@ +/* + * USB ConnectTech WhiteHEAT driver + * + * Copyright (C) 2002 + * Connect Tech Inc. + * + * Copyright (C) 1999 - 2001 + * Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * See Documentation/usb/usb-serial.txt for more information on using this + * driver + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> +#include <asm/termbits.h> +#include <linux/usb.h> +#include <linux/serial_reg.h> +#include <linux/serial.h> +#include <linux/usb/serial.h> +#include <linux/usb/ezusb.h> +#include "whiteheat.h" /* WhiteHEAT specific commands */ + +#ifndef CMSPAR +#define CMSPAR 0 +#endif + +/* + * Version Information + */ +#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Stuart MacDonald <stuartm@connecttech.com>" +#define DRIVER_DESC "USB ConnectTech WhiteHEAT driver" + +#define CONNECT_TECH_VENDOR_ID 0x0710 +#define CONNECT_TECH_FAKE_WHITE_HEAT_ID 0x0001 +#define CONNECT_TECH_WHITE_HEAT_ID 0x8001 + +/* + ID tables for whiteheat are unusual, because we want to different + things for different versions of the device. Eventually, this + will be doable from a single table. But, for now, we define two + separate ID tables, and then a third table that combines them + just for the purpose of exporting the autoloading information. +*/ +static const struct usb_device_id id_table_std[] = { + { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id id_table_prerenumeration[] = { + { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id id_table_combined[] = { + { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_WHITE_HEAT_ID) }, + { USB_DEVICE(CONNECT_TECH_VENDOR_ID, CONNECT_TECH_FAKE_WHITE_HEAT_ID) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table_combined); + + +/* function prototypes for the Connect Tech WhiteHEAT prerenumeration device */ +static int whiteheat_firmware_download(struct usb_serial *serial, + const struct usb_device_id *id); +static int whiteheat_firmware_attach(struct usb_serial *serial); + +/* function prototypes for the Connect Tech WhiteHEAT serial converter */ +static int whiteheat_attach(struct usb_serial *serial); +static void whiteheat_release(struct usb_serial *serial); +static int whiteheat_port_probe(struct usb_serial_port *port); +static int whiteheat_port_remove(struct usb_serial_port *port); +static int whiteheat_open(struct tty_struct *tty, + struct usb_serial_port *port); +static void whiteheat_close(struct usb_serial_port *port); +static int whiteheat_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg); +static void whiteheat_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old); +static int whiteheat_tiocmget(struct tty_struct *tty); +static int whiteheat_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear); +static void whiteheat_break_ctl(struct tty_struct *tty, int break_state); + +static struct usb_serial_driver whiteheat_fake_device = { + .driver = { + .owner = THIS_MODULE, + .name = "whiteheatnofirm", + }, + .description = "Connect Tech - WhiteHEAT - (prerenumeration)", + .id_table = id_table_prerenumeration, + .num_ports = 1, + .probe = whiteheat_firmware_download, + .attach = whiteheat_firmware_attach, +}; + +static struct usb_serial_driver whiteheat_device = { + .driver = { + .owner = THIS_MODULE, + .name = "whiteheat", + }, + .description = "Connect Tech - WhiteHEAT", + .id_table = id_table_std, + .num_ports = 4, + .attach = whiteheat_attach, + .release = whiteheat_release, + .port_probe = whiteheat_port_probe, + .port_remove = whiteheat_port_remove, + .open = whiteheat_open, + .close = whiteheat_close, + .ioctl = whiteheat_ioctl, + .set_termios = whiteheat_set_termios, + .break_ctl = whiteheat_break_ctl, + .tiocmget = whiteheat_tiocmget, + .tiocmset = whiteheat_tiocmset, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &whiteheat_fake_device, &whiteheat_device, NULL +}; + +struct whiteheat_command_private { + struct mutex mutex; + __u8 port_running; + __u8 command_finished; + wait_queue_head_t wait_command; /* for handling sleeping whilst + waiting for a command to + finish */ + __u8 result_buffer[64]; +}; + +struct whiteheat_private { + __u8 mcr; /* FIXME: no locking on mcr */ +}; + + +/* local function prototypes */ +static int start_command_port(struct usb_serial *serial); +static void stop_command_port(struct usb_serial *serial); +static void command_port_write_callback(struct urb *urb); +static void command_port_read_callback(struct urb *urb); + +static int firm_send_command(struct usb_serial_port *port, __u8 command, + __u8 *data, __u8 datasize); +static int firm_open(struct usb_serial_port *port); +static int firm_close(struct usb_serial_port *port); +static void firm_setup_port(struct tty_struct *tty); +static int firm_set_rts(struct usb_serial_port *port, __u8 onoff); +static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff); +static int firm_set_break(struct usb_serial_port *port, __u8 onoff); +static int firm_purge(struct usb_serial_port *port, __u8 rxtx); +static int firm_get_dtr_rts(struct usb_serial_port *port); +static int firm_report_tx_done(struct usb_serial_port *port); + + +#define COMMAND_PORT 4 +#define COMMAND_TIMEOUT (2*HZ) /* 2 second timeout for a command */ +#define COMMAND_TIMEOUT_MS 2000 +#define CLOSING_DELAY (30 * HZ) + + +/***************************************************************************** + * Connect Tech's White Heat prerenumeration driver functions + *****************************************************************************/ + +/* steps to download the firmware to the WhiteHEAT device: + - hold the reset (by writing to the reset bit of the CPUCS register) + - download the VEND_AX.HEX file to the chip using VENDOR_REQUEST-ANCHOR_LOAD + - release the reset (by writing to the CPUCS register) + - download the WH.HEX file for all addresses greater than 0x1b3f using + VENDOR_REQUEST-ANCHOR_EXTERNAL_RAM_LOAD + - hold the reset + - download the WH.HEX file for all addresses less than 0x1b40 using + VENDOR_REQUEST_ANCHOR_LOAD + - release the reset + - device renumerated itself and comes up as new device id with all + firmware download completed. +*/ +static int whiteheat_firmware_download(struct usb_serial *serial, + const struct usb_device_id *id) +{ + int response; + + response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat_loader.fw"); + if (response >= 0) { + response = ezusb_fx1_ihex_firmware_download(serial->dev, "whiteheat.fw"); + if (response >= 0) + return 0; + } + return -ENOENT; +} + + +static int whiteheat_firmware_attach(struct usb_serial *serial) +{ + /* We want this device to fail to have a driver assigned to it */ + return 1; +} + + +/***************************************************************************** + * Connect Tech's White Heat serial driver functions + *****************************************************************************/ +static int whiteheat_attach(struct usb_serial *serial) +{ + struct usb_serial_port *command_port; + struct whiteheat_command_private *command_info; + struct whiteheat_hw_info *hw_info; + int pipe; + int ret; + int alen; + __u8 *command; + __u8 *result; + + command_port = serial->port[COMMAND_PORT]; + + pipe = usb_sndbulkpipe(serial->dev, + command_port->bulk_out_endpointAddress); + command = kmalloc(2, GFP_KERNEL); + if (!command) + goto no_command_buffer; + command[0] = WHITEHEAT_GET_HW_INFO; + command[1] = 0; + + result = kmalloc(sizeof(*hw_info) + 1, GFP_KERNEL); + if (!result) + goto no_result_buffer; + /* + * When the module is reloaded the firmware is still there and + * the endpoints are still in the usb core unchanged. This is the + * unlinking bug in disguise. Same for the call below. + */ + usb_clear_halt(serial->dev, pipe); + ret = usb_bulk_msg(serial->dev, pipe, command, 2, + &alen, COMMAND_TIMEOUT_MS); + if (ret) { + dev_err(&serial->dev->dev, "%s: Couldn't send command [%d]\n", + serial->type->description, ret); + goto no_firmware; + } else if (alen != 2) { + dev_err(&serial->dev->dev, "%s: Send command incomplete [%d]\n", + serial->type->description, alen); + goto no_firmware; + } + + pipe = usb_rcvbulkpipe(serial->dev, + command_port->bulk_in_endpointAddress); + /* See the comment on the usb_clear_halt() above */ + usb_clear_halt(serial->dev, pipe); + ret = usb_bulk_msg(serial->dev, pipe, result, + sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS); + if (ret) { + dev_err(&serial->dev->dev, "%s: Couldn't get results [%d]\n", + serial->type->description, ret); + goto no_firmware; + } else if (alen != sizeof(*hw_info) + 1) { + dev_err(&serial->dev->dev, "%s: Get results incomplete [%d]\n", + serial->type->description, alen); + goto no_firmware; + } else if (result[0] != command[0]) { + dev_err(&serial->dev->dev, "%s: Command failed [%d]\n", + serial->type->description, result[0]); + goto no_firmware; + } + + hw_info = (struct whiteheat_hw_info *)&result[1]; + + dev_info(&serial->dev->dev, "%s: Firmware v%d.%02d\n", + serial->type->description, + hw_info->sw_major_rev, hw_info->sw_minor_rev); + + command_info = kmalloc(sizeof(struct whiteheat_command_private), + GFP_KERNEL); + if (!command_info) + goto no_command_private; + + mutex_init(&command_info->mutex); + command_info->port_running = 0; + init_waitqueue_head(&command_info->wait_command); + usb_set_serial_port_data(command_port, command_info); + command_port->write_urb->complete = command_port_write_callback; + command_port->read_urb->complete = command_port_read_callback; + kfree(result); + kfree(command); + + return 0; + +no_firmware: + /* Firmware likely not running */ + dev_err(&serial->dev->dev, + "%s: Unable to retrieve firmware version, try replugging\n", + serial->type->description); + dev_err(&serial->dev->dev, + "%s: If the firmware is not running (status led not blinking)\n", + serial->type->description); + dev_err(&serial->dev->dev, + "%s: please contact support@connecttech.com\n", + serial->type->description); + kfree(result); + kfree(command); + return -ENODEV; + +no_command_private: + kfree(result); +no_result_buffer: + kfree(command); +no_command_buffer: + return -ENOMEM; +} + +static void whiteheat_release(struct usb_serial *serial) +{ + struct usb_serial_port *command_port; + + /* free up our private data for our command port */ + command_port = serial->port[COMMAND_PORT]; + kfree(usb_get_serial_port_data(command_port)); +} + +static int whiteheat_port_probe(struct usb_serial_port *port) +{ + struct whiteheat_private *info; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + usb_set_serial_port_data(port, info); + + return 0; +} + +static int whiteheat_port_remove(struct usb_serial_port *port) +{ + struct whiteheat_private *info; + + info = usb_get_serial_port_data(port); + kfree(info); + + return 0; +} + +static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + int retval; + + retval = start_command_port(port->serial); + if (retval) + goto exit; + + /* send an open port command */ + retval = firm_open(port); + if (retval) { + stop_command_port(port->serial); + goto exit; + } + + retval = firm_purge(port, WHITEHEAT_PURGE_RX | WHITEHEAT_PURGE_TX); + if (retval) { + firm_close(port); + stop_command_port(port->serial); + goto exit; + } + + if (tty) + firm_setup_port(tty); + + /* Work around HCD bugs */ + usb_clear_halt(port->serial->dev, port->read_urb->pipe); + usb_clear_halt(port->serial->dev, port->write_urb->pipe); + + retval = usb_serial_generic_open(tty, port); + if (retval) { + firm_close(port); + stop_command_port(port->serial); + goto exit; + } +exit: + return retval; +} + + +static void whiteheat_close(struct usb_serial_port *port) +{ + firm_report_tx_done(port); + firm_close(port); + + usb_serial_generic_close(port); + + stop_command_port(port->serial); +} + +static int whiteheat_tiocmget(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct whiteheat_private *info = usb_get_serial_port_data(port); + unsigned int modem_signals = 0; + + firm_get_dtr_rts(port); + if (info->mcr & UART_MCR_DTR) + modem_signals |= TIOCM_DTR; + if (info->mcr & UART_MCR_RTS) + modem_signals |= TIOCM_RTS; + + return modem_signals; +} + +static int whiteheat_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct whiteheat_private *info = usb_get_serial_port_data(port); + + if (set & TIOCM_RTS) + info->mcr |= UART_MCR_RTS; + if (set & TIOCM_DTR) + info->mcr |= UART_MCR_DTR; + + if (clear & TIOCM_RTS) + info->mcr &= ~UART_MCR_RTS; + if (clear & TIOCM_DTR) + info->mcr &= ~UART_MCR_DTR; + + firm_set_dtr(port, info->mcr & UART_MCR_DTR); + firm_set_rts(port, info->mcr & UART_MCR_RTS); + return 0; +} + + +static int whiteheat_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + struct serial_struct serstruct; + void __user *user_arg = (void __user *)arg; + + switch (cmd) { + case TIOCGSERIAL: + memset(&serstruct, 0, sizeof(serstruct)); + serstruct.type = PORT_16654; + serstruct.line = port->minor; + serstruct.port = port->port_number; + serstruct.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; + serstruct.xmit_fifo_size = kfifo_size(&port->write_fifo); + serstruct.custom_divisor = 0; + serstruct.baud_base = 460800; + serstruct.close_delay = CLOSING_DELAY; + serstruct.closing_wait = CLOSING_DELAY; + + if (copy_to_user(user_arg, &serstruct, sizeof(serstruct))) + return -EFAULT; + break; + default: + break; + } + + return -ENOIOCTLCMD; +} + + +static void whiteheat_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + firm_setup_port(tty); +} + +static void whiteheat_break_ctl(struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + firm_set_break(port, break_state); +} + + +/***************************************************************************** + * Connect Tech's White Heat callback routines + *****************************************************************************/ +static void command_port_write_callback(struct urb *urb) +{ + int status = urb->status; + + if (status) { + dev_dbg(&urb->dev->dev, "nonzero urb status: %d\n", status); + return; + } +} + + +static void command_port_read_callback(struct urb *urb) +{ + struct usb_serial_port *command_port = urb->context; + struct whiteheat_command_private *command_info; + int status = urb->status; + unsigned char *data = urb->transfer_buffer; + int result; + + command_info = usb_get_serial_port_data(command_port); + if (!command_info) { + dev_dbg(&urb->dev->dev, "%s - command_info is NULL, exiting.\n", __func__); + return; + } + if (!urb->actual_length) { + dev_dbg(&urb->dev->dev, "%s - empty response, exiting.\n", __func__); + return; + } + if (status) { + dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, status); + if (status != -ENOENT) + command_info->command_finished = WHITEHEAT_CMD_FAILURE; + wake_up(&command_info->wait_command); + return; + } + + usb_serial_debug_data(&command_port->dev, __func__, urb->actual_length, data); + + if (data[0] == WHITEHEAT_CMD_COMPLETE) { + command_info->command_finished = WHITEHEAT_CMD_COMPLETE; + wake_up(&command_info->wait_command); + } else if (data[0] == WHITEHEAT_CMD_FAILURE) { + command_info->command_finished = WHITEHEAT_CMD_FAILURE; + wake_up(&command_info->wait_command); + } else if (data[0] == WHITEHEAT_EVENT) { + /* These are unsolicited reports from the firmware, hence no + waiting command to wakeup */ + dev_dbg(&urb->dev->dev, "%s - event received\n", __func__); + } else if ((data[0] == WHITEHEAT_GET_DTR_RTS) && + (urb->actual_length - 1 <= sizeof(command_info->result_buffer))) { + memcpy(command_info->result_buffer, &data[1], + urb->actual_length - 1); + command_info->command_finished = WHITEHEAT_CMD_COMPLETE; + wake_up(&command_info->wait_command); + } else + dev_dbg(&urb->dev->dev, "%s - bad reply from firmware\n", __func__); + + /* Continue trying to always read */ + result = usb_submit_urb(command_port->read_urb, GFP_ATOMIC); + if (result) + dev_dbg(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", + __func__, result); +} + + +/***************************************************************************** + * Connect Tech's White Heat firmware interface + *****************************************************************************/ +static int firm_send_command(struct usb_serial_port *port, __u8 command, + __u8 *data, __u8 datasize) +{ + struct usb_serial_port *command_port; + struct whiteheat_command_private *command_info; + struct whiteheat_private *info; + struct device *dev = &port->dev; + __u8 *transfer_buffer; + int retval = 0; + int t; + + dev_dbg(dev, "%s - command %d\n", __func__, command); + + command_port = port->serial->port[COMMAND_PORT]; + command_info = usb_get_serial_port_data(command_port); + mutex_lock(&command_info->mutex); + command_info->command_finished = false; + + transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer; + transfer_buffer[0] = command; + memcpy(&transfer_buffer[1], data, datasize); + command_port->write_urb->transfer_buffer_length = datasize + 1; + retval = usb_submit_urb(command_port->write_urb, GFP_NOIO); + if (retval) { + dev_dbg(dev, "%s - submit urb failed\n", __func__); + goto exit; + } + + /* wait for the command to complete */ + t = wait_event_timeout(command_info->wait_command, + (bool)command_info->command_finished, COMMAND_TIMEOUT); + if (!t) + usb_kill_urb(command_port->write_urb); + + if (command_info->command_finished == false) { + dev_dbg(dev, "%s - command timed out.\n", __func__); + retval = -ETIMEDOUT; + goto exit; + } + + if (command_info->command_finished == WHITEHEAT_CMD_FAILURE) { + dev_dbg(dev, "%s - command failed.\n", __func__); + retval = -EIO; + goto exit; + } + + if (command_info->command_finished == WHITEHEAT_CMD_COMPLETE) { + dev_dbg(dev, "%s - command completed.\n", __func__); + switch (command) { + case WHITEHEAT_GET_DTR_RTS: + info = usb_get_serial_port_data(port); + memcpy(&info->mcr, command_info->result_buffer, + sizeof(struct whiteheat_dr_info)); + break; + } + } +exit: + mutex_unlock(&command_info->mutex); + return retval; +} + + +static int firm_open(struct usb_serial_port *port) +{ + struct whiteheat_simple open_command; + + open_command.port = port->port_number + 1; + return firm_send_command(port, WHITEHEAT_OPEN, + (__u8 *)&open_command, sizeof(open_command)); +} + + +static int firm_close(struct usb_serial_port *port) +{ + struct whiteheat_simple close_command; + + close_command.port = port->port_number + 1; + return firm_send_command(port, WHITEHEAT_CLOSE, + (__u8 *)&close_command, sizeof(close_command)); +} + + +static void firm_setup_port(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct device *dev = &port->dev; + struct whiteheat_port_settings port_settings; + unsigned int cflag = tty->termios.c_cflag; + + port_settings.port = port->port_number + 1; + + /* get the byte size */ + switch (cflag & CSIZE) { + case CS5: port_settings.bits = 5; break; + case CS6: port_settings.bits = 6; break; + case CS7: port_settings.bits = 7; break; + default: + case CS8: port_settings.bits = 8; break; + } + dev_dbg(dev, "%s - data bits = %d\n", __func__, port_settings.bits); + + /* determine the parity */ + if (cflag & PARENB) + if (cflag & CMSPAR) + if (cflag & PARODD) + port_settings.parity = WHITEHEAT_PAR_MARK; + else + port_settings.parity = WHITEHEAT_PAR_SPACE; + else + if (cflag & PARODD) + port_settings.parity = WHITEHEAT_PAR_ODD; + else + port_settings.parity = WHITEHEAT_PAR_EVEN; + else + port_settings.parity = WHITEHEAT_PAR_NONE; + dev_dbg(dev, "%s - parity = %c\n", __func__, port_settings.parity); + + /* figure out the stop bits requested */ + if (cflag & CSTOPB) + port_settings.stop = 2; + else + port_settings.stop = 1; + dev_dbg(dev, "%s - stop bits = %d\n", __func__, port_settings.stop); + + /* figure out the flow control settings */ + if (cflag & CRTSCTS) + port_settings.hflow = (WHITEHEAT_HFLOW_CTS | + WHITEHEAT_HFLOW_RTS); + else + port_settings.hflow = WHITEHEAT_HFLOW_NONE; + dev_dbg(dev, "%s - hardware flow control = %s %s %s %s\n", __func__, + (port_settings.hflow & WHITEHEAT_HFLOW_CTS) ? "CTS" : "", + (port_settings.hflow & WHITEHEAT_HFLOW_RTS) ? "RTS" : "", + (port_settings.hflow & WHITEHEAT_HFLOW_DSR) ? "DSR" : "", + (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : ""); + + /* determine software flow control */ + if (I_IXOFF(tty)) + port_settings.sflow = WHITEHEAT_SFLOW_RXTX; + else + port_settings.sflow = WHITEHEAT_SFLOW_NONE; + dev_dbg(dev, "%s - software flow control = %c\n", __func__, port_settings.sflow); + + port_settings.xon = START_CHAR(tty); + port_settings.xoff = STOP_CHAR(tty); + dev_dbg(dev, "%s - XON = %2x, XOFF = %2x\n", __func__, port_settings.xon, port_settings.xoff); + + /* get the baud rate wanted */ + port_settings.baud = tty_get_baud_rate(tty); + dev_dbg(dev, "%s - baud rate = %d\n", __func__, port_settings.baud); + + /* fixme: should set validated settings */ + tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud); + /* handle any settings that aren't specified in the tty structure */ + port_settings.lloop = 0; + + /* now send the message to the device */ + firm_send_command(port, WHITEHEAT_SETUP_PORT, + (__u8 *)&port_settings, sizeof(port_settings)); +} + + +static int firm_set_rts(struct usb_serial_port *port, __u8 onoff) +{ + struct whiteheat_set_rdb rts_command; + + rts_command.port = port->port_number + 1; + rts_command.state = onoff; + return firm_send_command(port, WHITEHEAT_SET_RTS, + (__u8 *)&rts_command, sizeof(rts_command)); +} + + +static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff) +{ + struct whiteheat_set_rdb dtr_command; + + dtr_command.port = port->port_number + 1; + dtr_command.state = onoff; + return firm_send_command(port, WHITEHEAT_SET_DTR, + (__u8 *)&dtr_command, sizeof(dtr_command)); +} + + +static int firm_set_break(struct usb_serial_port *port, __u8 onoff) +{ + struct whiteheat_set_rdb break_command; + + break_command.port = port->port_number + 1; + break_command.state = onoff; + return firm_send_command(port, WHITEHEAT_SET_BREAK, + (__u8 *)&break_command, sizeof(break_command)); +} + + +static int firm_purge(struct usb_serial_port *port, __u8 rxtx) +{ + struct whiteheat_purge purge_command; + + purge_command.port = port->port_number + 1; + purge_command.what = rxtx; + return firm_send_command(port, WHITEHEAT_PURGE, + (__u8 *)&purge_command, sizeof(purge_command)); +} + + +static int firm_get_dtr_rts(struct usb_serial_port *port) +{ + struct whiteheat_simple get_dr_command; + + get_dr_command.port = port->port_number + 1; + return firm_send_command(port, WHITEHEAT_GET_DTR_RTS, + (__u8 *)&get_dr_command, sizeof(get_dr_command)); +} + + +static int firm_report_tx_done(struct usb_serial_port *port) +{ + struct whiteheat_simple close_command; + + close_command.port = port->port_number + 1; + return firm_send_command(port, WHITEHEAT_REPORT_TX_DONE, + (__u8 *)&close_command, sizeof(close_command)); +} + + +/***************************************************************************** + * Connect Tech's White Heat utility functions + *****************************************************************************/ +static int start_command_port(struct usb_serial *serial) +{ + struct usb_serial_port *command_port; + struct whiteheat_command_private *command_info; + int retval = 0; + + command_port = serial->port[COMMAND_PORT]; + command_info = usb_get_serial_port_data(command_port); + mutex_lock(&command_info->mutex); + if (!command_info->port_running) { + /* Work around HCD bugs */ + usb_clear_halt(serial->dev, command_port->read_urb->pipe); + + retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL); + if (retval) { + dev_err(&serial->dev->dev, + "%s - failed submitting read urb, error %d\n", + __func__, retval); + goto exit; + } + } + command_info->port_running++; + +exit: + mutex_unlock(&command_info->mutex); + return retval; +} + + +static void stop_command_port(struct usb_serial *serial) +{ + struct usb_serial_port *command_port; + struct whiteheat_command_private *command_info; + + command_port = serial->port[COMMAND_PORT]; + command_info = usb_get_serial_port_data(command_port); + mutex_lock(&command_info->mutex); + command_info->port_running--; + if (!command_info->port_running) + usb_kill_urb(command_port->read_urb); + mutex_unlock(&command_info->mutex); +} + +module_usb_serial_driver(serial_drivers, id_table_combined); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +MODULE_FIRMWARE("whiteheat.fw"); +MODULE_FIRMWARE("whiteheat_loader.fw"); diff --git a/kernel/drivers/usb/serial/whiteheat.h b/kernel/drivers/usb/serial/whiteheat.h new file mode 100644 index 000000000..38065df4d --- /dev/null +++ b/kernel/drivers/usb/serial/whiteheat.h @@ -0,0 +1,302 @@ +/* + * USB ConnectTech WhiteHEAT driver + * + * Copyright (C) 2002 + * Connect Tech Inc. + * + * Copyright (C) 1999, 2000 + * Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * See Documentation/usb/usb-serial.txt for more information on using this + * driver + * + */ + +#ifndef __LINUX_USB_SERIAL_WHITEHEAT_H +#define __LINUX_USB_SERIAL_WHITEHEAT_H + + +/* WhiteHEAT commands */ +#define WHITEHEAT_OPEN 1 /* open the port */ +#define WHITEHEAT_CLOSE 2 /* close the port */ +#define WHITEHEAT_SETUP_PORT 3 /* change port settings */ +#define WHITEHEAT_SET_RTS 4 /* turn RTS on or off */ +#define WHITEHEAT_SET_DTR 5 /* turn DTR on or off */ +#define WHITEHEAT_SET_BREAK 6 /* turn BREAK on or off */ +#define WHITEHEAT_DUMP 7 /* dump memory */ +#define WHITEHEAT_STATUS 8 /* get status */ +#define WHITEHEAT_PURGE 9 /* clear the UART fifos */ +#define WHITEHEAT_GET_DTR_RTS 10 /* get the state of DTR and RTS + for a port */ +#define WHITEHEAT_GET_HW_INFO 11 /* get EEPROM info and + hardware ID */ +#define WHITEHEAT_REPORT_TX_DONE 12 /* get the next TX done */ +#define WHITEHEAT_EVENT 13 /* unsolicited status events */ +#define WHITEHEAT_ECHO 14 /* send data to the indicated + IN endpoint */ +#define WHITEHEAT_DO_TEST 15 /* perform specified test */ +#define WHITEHEAT_CMD_COMPLETE 16 /* reply for some commands */ +#define WHITEHEAT_CMD_FAILURE 17 /* reply for failed commands */ + + +/* + * Commands to the firmware + */ + + +/* + * WHITEHEAT_OPEN + * WHITEHEAT_CLOSE + * WHITEHEAT_STATUS + * WHITEHEAT_GET_DTR_RTS + * WHITEHEAT_REPORT_TX_DONE +*/ +struct whiteheat_simple { + __u8 port; /* port number (1 to N) */ +}; + + +/* + * WHITEHEAT_SETUP_PORT + */ +#define WHITEHEAT_PAR_NONE 'n' /* no parity */ +#define WHITEHEAT_PAR_EVEN 'e' /* even parity */ +#define WHITEHEAT_PAR_ODD 'o' /* odd parity */ +#define WHITEHEAT_PAR_SPACE '0' /* space (force 0) parity */ +#define WHITEHEAT_PAR_MARK '1' /* mark (force 1) parity */ + +#define WHITEHEAT_SFLOW_NONE 'n' /* no software flow control */ +#define WHITEHEAT_SFLOW_RX 'r' /* XOFF/ON is sent when RX + fills/empties */ +#define WHITEHEAT_SFLOW_TX 't' /* when received XOFF/ON will + stop/start TX */ +#define WHITEHEAT_SFLOW_RXTX 'b' /* both SFLOW_RX and SFLOW_TX */ + +#define WHITEHEAT_HFLOW_NONE 0x00 /* no hardware flow control */ +#define WHITEHEAT_HFLOW_RTS_TOGGLE 0x01 /* RTS is on during transmit, + off otherwise */ +#define WHITEHEAT_HFLOW_DTR 0x02 /* DTR is off/on when RX + fills/empties */ +#define WHITEHEAT_HFLOW_CTS 0x08 /* when received CTS off/on + will stop/start TX */ +#define WHITEHEAT_HFLOW_DSR 0x10 /* when received DSR off/on + will stop/start TX */ +#define WHITEHEAT_HFLOW_RTS 0x80 /* RTS is off/on when RX + fills/empties */ + +struct whiteheat_port_settings { + __u8 port; /* port number (1 to N) */ + __u32 baud; /* any value 7 - 460800, firmware calculates + best fit; arrives little endian */ + __u8 bits; /* 5, 6, 7, or 8 */ + __u8 stop; /* 1 or 2, default 1 (2 = 1.5 if bits = 5) */ + __u8 parity; /* see WHITEHEAT_PAR_* above */ + __u8 sflow; /* see WHITEHEAT_SFLOW_* above */ + __u8 xoff; /* XOFF byte value */ + __u8 xon; /* XON byte value */ + __u8 hflow; /* see WHITEHEAT_HFLOW_* above */ + __u8 lloop; /* 0/1 turns local loopback mode off/on */ +} __attribute__ ((packed)); + + +/* + * WHITEHEAT_SET_RTS + * WHITEHEAT_SET_DTR + * WHITEHEAT_SET_BREAK + */ +#define WHITEHEAT_RTS_OFF 0x00 +#define WHITEHEAT_RTS_ON 0x01 +#define WHITEHEAT_DTR_OFF 0x00 +#define WHITEHEAT_DTR_ON 0x01 +#define WHITEHEAT_BREAK_OFF 0x00 +#define WHITEHEAT_BREAK_ON 0x01 + +struct whiteheat_set_rdb { + __u8 port; /* port number (1 to N) */ + __u8 state; /* 0/1 turns signal off/on */ +}; + + +/* + * WHITEHEAT_DUMP + */ +#define WHITEHEAT_DUMP_MEM_DATA 'd' /* data */ +#define WHITEHEAT_DUMP_MEM_IDATA 'i' /* idata */ +#define WHITEHEAT_DUMP_MEM_BDATA 'b' /* bdata */ +#define WHITEHEAT_DUMP_MEM_XDATA 'x' /* xdata */ + +/* + * Allowable address ranges (firmware checks address): + * Type DATA: 0x00 - 0xff + * Type IDATA: 0x80 - 0xff + * Type BDATA: 0x20 - 0x2f + * Type XDATA: 0x0000 - 0xffff + * + * B/I/DATA all read the local memory space + * XDATA reads the external memory space + * BDATA returns bits as bytes + * + * NOTE: 0x80 - 0xff (local space) are the Special Function Registers + * of the 8051, and some have on-read side-effects. + */ + +struct whiteheat_dump { + __u8 mem_type; /* see WHITEHEAT_DUMP_* above */ + __u16 addr; /* address, see restrictions above */ + __u16 length; /* number of bytes to dump, max 63 bytes */ +}; + + +/* + * WHITEHEAT_PURGE + */ +#define WHITEHEAT_PURGE_RX 0x01 /* purge rx fifos */ +#define WHITEHEAT_PURGE_TX 0x02 /* purge tx fifos */ + +struct whiteheat_purge { + __u8 port; /* port number (1 to N) */ + __u8 what; /* bit pattern of what to purge */ +}; + + +/* + * WHITEHEAT_ECHO + */ +struct whiteheat_echo { + __u8 port; /* port number (1 to N) */ + __u8 length; /* length of message to echo, max 61 bytes */ + __u8 echo_data[61]; /* data to echo */ +}; + + +/* + * WHITEHEAT_DO_TEST + */ +#define WHITEHEAT_TEST_UART_RW 0x01 /* read/write uart registers */ +#define WHITEHEAT_TEST_UART_INTR 0x02 /* uart interrupt */ +#define WHITEHEAT_TEST_SETUP_CONT 0x03 /* setup for + PORT_CONT/PORT_DISCONT */ +#define WHITEHEAT_TEST_PORT_CONT 0x04 /* port connect */ +#define WHITEHEAT_TEST_PORT_DISCONT 0x05 /* port disconnect */ +#define WHITEHEAT_TEST_UART_CLK_START 0x06 /* uart clock test start */ +#define WHITEHEAT_TEST_UART_CLK_STOP 0x07 /* uart clock test stop */ +#define WHITEHEAT_TEST_MODEM_FT 0x08 /* modem signals, requires a + loopback cable/connector */ +#define WHITEHEAT_TEST_ERASE_EEPROM 0x09 /* erase eeprom */ +#define WHITEHEAT_TEST_READ_EEPROM 0x0a /* read eeprom */ +#define WHITEHEAT_TEST_PROGRAM_EEPROM 0x0b /* program eeprom */ + +struct whiteheat_test { + __u8 port; /* port number (1 to n) */ + __u8 test; /* see WHITEHEAT_TEST_* above*/ + __u8 info[32]; /* additional info */ +}; + + +/* + * Replies from the firmware + */ + + +/* + * WHITEHEAT_STATUS + */ +#define WHITEHEAT_EVENT_MODEM 0x01 /* modem field is valid */ +#define WHITEHEAT_EVENT_ERROR 0x02 /* error field is valid */ +#define WHITEHEAT_EVENT_FLOW 0x04 /* flow field is valid */ +#define WHITEHEAT_EVENT_CONNECT 0x08 /* connect field is valid */ + +#define WHITEHEAT_FLOW_NONE 0x00 /* no flow control active */ +#define WHITEHEAT_FLOW_HARD_OUT 0x01 /* TX is stopped by CTS + (waiting for CTS to go on) */ +#define WHITEHEAT_FLOW_HARD_IN 0x02 /* remote TX is stopped + by RTS */ +#define WHITEHEAT_FLOW_SOFT_OUT 0x04 /* TX is stopped by XOFF + received (waiting for XON) */ +#define WHITEHEAT_FLOW_SOFT_IN 0x08 /* remote TX is stopped by XOFF + transmitted */ +#define WHITEHEAT_FLOW_TX_DONE 0x80 /* TX has completed */ + +struct whiteheat_status_info { + __u8 port; /* port number (1 to N) */ + __u8 event; /* indicates what the current event is, + see WHITEHEAT_EVENT_* above */ + __u8 modem; /* modem signal status (copy of uart's + MSR register) */ + __u8 error; /* line status (copy of uart's LSR register) */ + __u8 flow; /* flow control state, see WHITEHEAT_FLOW_* + above */ + __u8 connect; /* 0 means not connected, non-zero means + connected */ +}; + + +/* + * WHITEHEAT_GET_DTR_RTS + */ +struct whiteheat_dr_info { + __u8 mcr; /* copy of uart's MCR register */ +}; + + +/* + * WHITEHEAT_GET_HW_INFO + */ +struct whiteheat_hw_info { + __u8 hw_id; /* hardware id number, WhiteHEAT = 0 */ + __u8 sw_major_rev; /* major version number */ + __u8 sw_minor_rev; /* minor version number */ + struct whiteheat_hw_eeprom_info { + __u8 b0; /* B0 */ + __u8 vendor_id_low; /* vendor id (low byte) */ + __u8 vendor_id_high; /* vendor id (high byte) */ + __u8 product_id_low; /* product id (low byte) */ + __u8 product_id_high; /* product id (high byte) */ + __u8 device_id_low; /* device id (low byte) */ + __u8 device_id_high; /* device id (high byte) */ + __u8 not_used_1; + __u8 serial_number_0; /* serial number (low byte) */ + __u8 serial_number_1; /* serial number */ + __u8 serial_number_2; /* serial number */ + __u8 serial_number_3; /* serial number (high byte) */ + __u8 not_used_2; + __u8 not_used_3; + __u8 checksum_low; /* checksum (low byte) */ + __u8 checksum_high; /* checksum (high byte */ + } hw_eeprom_info; /* EEPROM contents */ +}; + + +/* + * WHITEHEAT_EVENT + */ +struct whiteheat_event_info { + __u8 port; /* port number (1 to N) */ + __u8 event; /* see whiteheat_status_info.event */ + __u8 info; /* see whiteheat_status_info.modem, .error, + .flow, .connect */ +}; + + +/* + * WHITEHEAT_DO_TEST + */ +#define WHITEHEAT_TEST_FAIL 0x00 /* test failed */ +#define WHITEHEAT_TEST_UNKNOWN 0x01 /* unknown test requested */ +#define WHITEHEAT_TEST_PASS 0xff /* test passed */ + +struct whiteheat_test_info { + __u8 port; /* port number (1 to N) */ + __u8 test; /* indicates which test this is a response for, + see WHITEHEAT_DO_TEST above */ + __u8 status; /* see WHITEHEAT_TEST_* above */ + __u8 results[32]; /* test-dependent results */ +}; + + +#endif diff --git a/kernel/drivers/usb/serial/wishbone-serial.c b/kernel/drivers/usb/serial/wishbone-serial.c new file mode 100644 index 000000000..4fed4a0bd --- /dev/null +++ b/kernel/drivers/usb/serial/wishbone-serial.c @@ -0,0 +1,94 @@ +/* + * USB Wishbone-Serial adapter driver + * + * Copyright (C) 2013 Wesley W. Terpstra <w.terpstra@gsi.de> + * Copyright (C) 2013 GSI Helmholtz Centre for Heavy Ion Research GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/uaccess.h> + +#define GSI_VENDOR_OPENCLOSE 0xB0 + +static const struct usb_device_id id_table[] = { + { USB_DEVICE_AND_INTERFACE_INFO(0x1D50, 0x6062, 0xFF, 0xFF, 0xFF) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* + * Etherbone must be told that a new stream has begun before data arrives. + * This is necessary to restart the negotiation of Wishbone bus parameters. + * Similarly, when the stream ends, Etherbone must be told so that the cycle + * line can be driven low in the case that userspace failed to do so. + */ +static int usb_gsi_openclose(struct usb_serial_port *port, int value) +{ + struct usb_device *dev = port->serial->dev; + + return usb_control_msg( + dev, + usb_sndctrlpipe(dev, 0), /* Send to EP0OUT */ + GSI_VENDOR_OPENCLOSE, + USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, + value, /* wValue = device is open(1) or closed(0) */ + port->serial->interface->cur_altsetting->desc.bInterfaceNumber, + NULL, 0, /* There is no data stage */ + 5000); /* Timeout till operation fails */ +} + +static int wishbone_serial_open(struct tty_struct *tty, + struct usb_serial_port *port) +{ + int retval; + + retval = usb_gsi_openclose(port, 1); + if (retval) { + dev_err(&port->serial->dev->dev, + "Could not mark device as open (%d)\n", + retval); + return retval; + } + + retval = usb_serial_generic_open(tty, port); + if (retval) + usb_gsi_openclose(port, 0); + + return retval; +} + +static void wishbone_serial_close(struct usb_serial_port *port) +{ + usb_serial_generic_close(port); + usb_gsi_openclose(port, 0); +} + +static struct usb_serial_driver wishbone_serial_device = { + .driver = { + .owner = THIS_MODULE, + .name = "wishbone_serial", + }, + .id_table = id_table, + .num_ports = 1, + .open = &wishbone_serial_open, + .close = &wishbone_serial_close, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &wishbone_serial_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_AUTHOR("Wesley W. Terpstra <w.terpstra@gsi.de>"); +MODULE_DESCRIPTION("USB Wishbone-Serial adapter"); +MODULE_LICENSE("GPL"); diff --git a/kernel/drivers/usb/serial/xsens_mt.c b/kernel/drivers/usb/serial/xsens_mt.c new file mode 100644 index 000000000..3837d5113 --- /dev/null +++ b/kernel/drivers/usb/serial/xsens_mt.c @@ -0,0 +1,72 @@ +/* + * Xsens MT USB driver + * + * Copyright (C) 2013 Xsens <info@xsens.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/uaccess.h> + +#define XSENS_VID 0x2639 + +#define MTi_10_IMU_PID 0x0001 +#define MTi_20_VRU_PID 0x0002 +#define MTi_30_AHRS_PID 0x0003 + +#define MTi_100_IMU_PID 0x0011 +#define MTi_200_VRU_PID 0x0012 +#define MTi_300_AHRS_PID 0x0013 + +#define MTi_G_700_GPS_INS_PID 0x0017 + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(XSENS_VID, MTi_10_IMU_PID) }, + { USB_DEVICE(XSENS_VID, MTi_20_VRU_PID) }, + { USB_DEVICE(XSENS_VID, MTi_30_AHRS_PID) }, + + { USB_DEVICE(XSENS_VID, MTi_100_IMU_PID) }, + { USB_DEVICE(XSENS_VID, MTi_200_VRU_PID) }, + { USB_DEVICE(XSENS_VID, MTi_300_AHRS_PID) }, + + { USB_DEVICE(XSENS_VID, MTi_G_700_GPS_INS_PID) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static int xsens_mt_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + if (serial->interface->cur_altsetting->desc.bInterfaceNumber == 1) + return 0; + + return -ENODEV; +} + +static struct usb_serial_driver xsens_mt_device = { + .driver = { + .owner = THIS_MODULE, + .name = "xsens_mt", + }, + .id_table = id_table, + .num_ports = 1, + + .probe = xsens_mt_probe, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &xsens_mt_device, NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_AUTHOR("Frans Klaver <frans.klaver@xsens.com>"); +MODULE_DESCRIPTION("USB-serial driver for Xsens motion trackers"); +MODULE_LICENSE("GPL"); |