diff options
Diffstat (limited to 'kernel/drivers/usb/serial/keyspan_usa90msg.h')
| -rw-r--r-- | kernel/drivers/usb/serial/keyspan_usa90msg.h | 198 |
1 files changed, 198 insertions, 0 deletions
diff --git a/kernel/drivers/usb/serial/keyspan_usa90msg.h b/kernel/drivers/usb/serial/keyspan_usa90msg.h new file mode 100644 index 000000000..86708ecd8 --- /dev/null +++ b/kernel/drivers/usb/serial/keyspan_usa90msg.h @@ -0,0 +1,198 @@ +/* + usa90msg.h + + Copyright (c) 1998-2003 InnoSys Incorporated. All Rights Reserved + This file is available under a BSD-style copyright + + Keyspan USB Async Message Formats for the USA19HS + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are + met: + + 1. Redistributions of source code must retain this licence text + without modification, this list of conditions, and the following + disclaimer. The following copyright notice must appear immediately at + the beginning of all source files: + + Copyright (c) 1998-2003 InnoSys Incorporated. All Rights Reserved + + This file is available under a BSD-style copyright + + 2. The name of InnoSys Incorporated may not be used to endorse or promote + products derived from this software without specific prior written + permission. + + THIS SOFTWARE IS PROVIDED BY INNOSYS CORP. ``AS IS'' AND ANY EXPRESS OR + IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, + INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + SUCH DAMAGE. + + Revisions: + + 2003feb14 add setTxMode/txMode and cancelRxXoff to portControl + 2003mar21 change name of PARITY_0/1 to add MARK/SPACE +*/ + +#ifndef __USA90MSG__ +#define __USA90MSG__ + +struct keyspan_usa90_portControlMessage +{ + /* + there are three types of "commands" sent in the control message: + + 1. configuration changes which must be requested by setting + the corresponding "set" flag (and should only be requested + when necessary, to reduce overhead on the device): + */ + + u8 setClocking, // host requests baud rate be set + baudLo, // host does baud divisor calculation + baudHi, // host does baud divisor calculation + + setLcr, // host requests lcr be set + lcr, // use PARITY, STOPBITS, DATABITS below + + setRxMode, // set receive mode + rxMode, // RXMODE_DMA or RXMODE_BYHAND + + setTxMode, // set transmit mode + txMode, // TXMODE_DMA or TXMODE_BYHAND + + setTxFlowControl, // host requests tx flow control be set + txFlowControl , // use TX_FLOW... bits below + setRxFlowControl, // host requests rx flow control be set + rxFlowControl, // use RX_FLOW... bits below + sendXoff, // host requests XOFF transmitted immediately + sendXon, // host requests XON char transmitted + xonChar, // specified in current character format + xoffChar, // specified in current character format + + sendChar, // host requests char transmitted immediately + txChar, // character to send + + setRts, // host requests RTS output be set + rts, // 1=on, 0=off + setDtr, // host requests DTR output be set + dtr; // 1=on, 0=off + + + /* + 2. configuration data which is simply used as is + and must be specified correctly in every host message. + */ + + u8 rxForwardingLength, // forward when this number of chars available + rxForwardingTimeout, // (1-31 in ms) + txAckSetting; // 0=don't ack, 1=normal, 2-255 TBD... + /* + 3. Firmware states which cause actions if they change + and must be specified correctly in every host message. + */ + + u8 portEnabled, // 0=disabled, 1=enabled + txFlush, // 0=normal, 1=toss outbound data + txBreak, // 0=break off, 1=break on + loopbackMode; // 0=no loopback, 1=loopback enabled + + /* + 4. commands which are flags only; these are processed in order + (so that, e.g., if rxFlush and rxForward flags are set, the + port will have no data to forward); any non-zero value + is respected + */ + + u8 rxFlush, // toss inbound data + rxForward, // forward all inbound data, NOW (as if fwdLen==1) + cancelRxXoff, // cancel any receive XOFF state (_txXoff) + returnStatus; // return current status NOW +}; + +// defines for bits in lcr +#define USA_DATABITS_5 0x00 +#define USA_DATABITS_6 0x01 +#define USA_DATABITS_7 0x02 +#define USA_DATABITS_8 0x03 +#define STOPBITS_5678_1 0x00 // 1 stop bit for all byte sizes +#define STOPBITS_5_1p5 0x04 // 1.5 stop bits for 5-bit byte +#define STOPBITS_678_2 0x04 // 2 stop bits for 6-8 bit byte +#define USA_PARITY_NONE 0x00 +#define USA_PARITY_ODD 0x08 +#define USA_PARITY_EVEN 0x18 +#define PARITY_MARK_1 0x28 // force parity MARK +#define PARITY_SPACE_0 0x38 // force parity SPACE + +#define TXFLOW_CTS 0x04 +#define TXFLOW_DSR 0x08 +#define TXFLOW_XOFF 0x01 +#define TXFLOW_XOFF_ANY 0x02 +#define TXFLOW_XOFF_BITS (TXFLOW_XOFF | TXFLOW_XOFF_ANY) + +#define RXFLOW_XOFF 0x10 +#define RXFLOW_RTS 0x20 +#define RXFLOW_DTR 0x40 +#define RXFLOW_DSR_SENSITIVITY 0x80 + +#define RXMODE_BYHAND 0x00 +#define RXMODE_DMA 0x02 + +#define TXMODE_BYHAND 0x00 +#define TXMODE_DMA 0x02 + + +// all things called "StatusMessage" are sent on the status endpoint + +struct keyspan_usa90_portStatusMessage +{ + u8 msr, // reports the actual MSR register + cts, // reports CTS pin + dcd, // reports DCD pin + dsr, // reports DSR pin + ri, // reports RI pin + _txXoff, // port is in XOFF state (we received XOFF) + rxBreak, // reports break state + rxOverrun, // count of overrun errors (since last reported) + rxParity, // count of parity errors (since last reported) + rxFrame, // count of frame errors (since last reported) + portState, // PORTSTATE_xxx bits (useful for debugging) + messageAck, // message acknowledgement + charAck, // character acknowledgement + controlResponse; // (value = returnStatus) a control message has been processed +}; + +// bits in RX data message when STAT byte is included + +#define RXERROR_OVERRUN 0x02 +#define RXERROR_PARITY 0x04 +#define RXERROR_FRAMING 0x08 +#define RXERROR_BREAK 0x10 + +#define PORTSTATE_ENABLED 0x80 +#define PORTSTATE_TXFLUSH 0x01 +#define PORTSTATE_TXBREAK 0x02 +#define PORTSTATE_LOOPBACK 0x04 + +// MSR bits + +#define USA_MSR_dCTS 0x01 // CTS has changed since last report +#define USA_MSR_dDSR 0x02 +#define USA_MSR_dRI 0x04 +#define USA_MSR_dDCD 0x08 + +#define USA_MSR_CTS 0x10 // current state of CTS +#define USA_MSR_DSR 0x20 +#define USA_USA_MSR_RI 0x40 +#define MSR_DCD 0x80 + +// ie: the maximum length of an endpoint buffer +#define MAX_DATA_LEN 64 + +#endif |