summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/usb/phy
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/usb/phy')
-rw-r--r--kernel/drivers/usb/phy/Kconfig216
-rw-r--r--kernel/drivers/usb/phy/Makefile29
-rw-r--r--kernel/drivers/usb/phy/am35x-phy-control.h21
-rw-r--r--kernel/drivers/usb/phy/of.c47
-rw-r--r--kernel/drivers/usb/phy/phy-ab8500-usb.c1538
-rw-r--r--kernel/drivers/usb/phy/phy-am335x-control.c184
-rw-r--r--kernel/drivers/usb/phy/phy-am335x.c146
-rw-r--r--kernel/drivers/usb/phy/phy-fsl-usb.c1194
-rw-r--r--kernel/drivers/usb/phy/phy-fsl-usb.h406
-rw-r--r--kernel/drivers/usb/phy/phy-generic.c374
-rw-r--r--kernel/drivers/usb/phy/phy-generic.h27
-rw-r--r--kernel/drivers/usb/phy/phy-gpio-vbus-usb.c397
-rw-r--r--kernel/drivers/usb/phy/phy-isp1301-omap.c1650
-rw-r--r--kernel/drivers/usb/phy/phy-isp1301.c163
-rw-r--r--kernel/drivers/usb/phy/phy-keystone.c135
-rw-r--r--kernel/drivers/usb/phy/phy-msm-usb.c1830
-rw-r--r--kernel/drivers/usb/phy/phy-mv-usb.c905
-rw-r--r--kernel/drivers/usb/phy/phy-mv-usb.h164
-rw-r--r--kernel/drivers/usb/phy/phy-mxs-usb.c589
-rw-r--r--kernel/drivers/usb/phy/phy-omap-otg.c168
-rw-r--r--kernel/drivers/usb/phy/phy-rcar-gen2-usb.c246
-rw-r--r--kernel/drivers/usb/phy/phy-rcar-usb.c247
-rw-r--r--kernel/drivers/usb/phy/phy-tahvo.c461
-rw-r--r--kernel/drivers/usb/phy/phy-tegra-usb.c1090
-rw-r--r--kernel/drivers/usb/phy/phy-twl6030-usb.c452
-rw-r--r--kernel/drivers/usb/phy/phy-ulpi-viewport.c82
-rw-r--r--kernel/drivers/usb/phy/phy-ulpi.c286
-rw-r--r--kernel/drivers/usb/phy/phy.c468
28 files changed, 13515 insertions, 0 deletions
diff --git a/kernel/drivers/usb/phy/Kconfig b/kernel/drivers/usb/phy/Kconfig
new file mode 100644
index 000000000..2175678e6
--- /dev/null
+++ b/kernel/drivers/usb/phy/Kconfig
@@ -0,0 +1,216 @@
+#
+# Physical Layer USB driver configuration
+#
+menu "USB Physical Layer drivers"
+
+config USB_PHY
+ def_bool n
+
+#
+# USB Transceiver Drivers
+#
+config AB8500_USB
+ tristate "AB8500 USB Transceiver Driver"
+ depends on AB8500_CORE
+ select USB_PHY
+ help
+ Enable this to support the USB OTG transceiver in AB8500 chip.
+ This transceiver supports high and full speed devices plus,
+ in host mode, low speed.
+
+config FSL_USB2_OTG
+ bool "Freescale USB OTG Transceiver Driver"
+ depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM
+ select USB_OTG
+ select USB_PHY
+ help
+ Enable this to support Freescale USB OTG transceiver.
+
+config ISP1301_OMAP
+ tristate "Philips ISP1301 with OMAP OTG"
+ depends on I2C && ARCH_OMAP_OTG
+ depends on USB
+ select USB_PHY
+ help
+ If you say yes here you get support for the Philips ISP1301
+ USB-On-The-Go transceiver working with the OMAP OTG controller.
+ The ISP1301 is a full speed USB transceiver which is used in
+ products including H2, H3, and H4 development boards for Texas
+ Instruments OMAP processors.
+
+ This driver can also be built as a module. If so, the module
+ will be called phy-isp1301-omap.
+
+config KEYSTONE_USB_PHY
+ tristate "Keystone USB PHY Driver"
+ depends on ARCH_KEYSTONE || COMPILE_TEST
+ select NOP_USB_XCEIV
+ help
+ Enable this to support Keystone USB phy. This driver provides
+ interface to interact with USB 2.0 and USB 3.0 PHY that is part
+ of the Keystone SOC.
+
+config NOP_USB_XCEIV
+ tristate "NOP USB Transceiver Driver"
+ select USB_PHY
+ help
+ This driver is to be used by all the usb transceiver which are either
+ built-in with usb ip or which are autonomous and doesn't require any
+ phy programming such as ISP1x04 etc.
+
+config AM335X_CONTROL_USB
+ tristate
+
+config AM335X_PHY_USB
+ tristate "AM335x USB PHY Driver"
+ depends on ARM || COMPILE_TEST
+ select USB_PHY
+ select AM335X_CONTROL_USB
+ select NOP_USB_XCEIV
+ help
+ This driver provides PHY support for that phy which part for the
+ AM335x SoC.
+
+config SAMSUNG_USBPHY
+ tristate
+ help
+ Enable this to support Samsung USB phy helper driver for Samsung SoCs.
+ This driver provides common interface to interact, for Samsung USB 2.0 PHY
+ driver and later for Samsung USB 3.0 PHY driver.
+
+config TWL6030_USB
+ tristate "TWL6030 USB Transceiver Driver"
+ depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
+ help
+ Enable this to support the USB OTG transceiver on TWL6030
+ family chips. This TWL6030 transceiver has the VBUS and ID GND
+ and OTG SRP events capabilities. For all other transceiver functionality
+ UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs
+ are hooked to this driver through platform_data structure.
+ The definition of internal PHY APIs are in the mach-omap2 layer.
+
+config USB_GPIO_VBUS
+ tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
+ depends on GPIOLIB
+ select USB_PHY
+ help
+ Provides simple GPIO VBUS sensing for controllers with an
+ internal transceiver via the usb_phy interface, and
+ optionally control of a D+ pullup GPIO as well as a VBUS
+ current limit regulator.
+
+config OMAP_OTG
+ tristate "OMAP USB OTG controller driver"
+ depends on ARCH_OMAP_OTG && EXTCON
+ help
+ Enable this to support some transceivers on OMAP1 platforms. OTG
+ controller is needed to switch between host and peripheral modes.
+
+ This driver can also be built as a module. If so, the module
+ will be called phy-omap-otg.
+
+config TAHVO_USB
+ tristate "Tahvo USB transceiver driver"
+ depends on MFD_RETU && EXTCON
+ select USB_PHY
+ help
+ Enable this to support USB transceiver on Tahvo. This is used
+ at least on Nokia 770.
+
+config TAHVO_USB_HOST_BY_DEFAULT
+ depends on TAHVO_USB
+ bool "Device in USB host mode by default"
+ help
+ Say Y here, if you want the device to enter USB host mode
+ by default on bootup.
+
+config USB_ISP1301
+ tristate "NXP ISP1301 USB transceiver support"
+ depends on USB || USB_GADGET
+ depends on I2C
+ select USB_PHY
+ help
+ Say Y here to add support for the NXP ISP1301 USB transceiver driver.
+ This chip is typically used as USB transceiver for USB host, gadget
+ and OTG drivers (to be selected separately).
+
+ To compile this driver as a module, choose M here: the
+ module will be called phy-isp1301.
+
+config USB_MSM_OTG
+ tristate "Qualcomm on-chip USB OTG controller support"
+ depends on (USB || USB_GADGET) && (ARCH_QCOM || COMPILE_TEST)
+ depends on RESET_CONTROLLER
+ select USB_PHY
+ help
+ Enable this to support the USB OTG transceiver on Qualcomm chips. It
+ handles PHY initialization, clock management, and workarounds
+ required after resetting the hardware and power management.
+ This driver is required even for peripheral only or host only
+ mode configurations.
+ This driver is not supported on boards like trout which
+ has an external PHY.
+
+config USB_MV_OTG
+ tristate "Marvell USB OTG support"
+ depends on USB_EHCI_MV && USB_MV_UDC && PM
+ select USB_OTG
+ select USB_PHY
+ help
+ Say Y here if you want to build Marvell USB OTG transciever
+ driver in kernel (including PXA and MMP series). This driver
+ implements role switch between EHCI host driver and gadget driver.
+
+ To compile this driver as a module, choose M here.
+
+config USB_MXS_PHY
+ tristate "Freescale MXS USB PHY support"
+ depends on ARCH_MXC || ARCH_MXS
+ select STMP_DEVICE
+ select USB_PHY
+ help
+ Enable this to support the Freescale MXS USB PHY.
+
+ MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
+
+config USB_RCAR_PHY
+ tristate "Renesas R-Car USB PHY support"
+ depends on USB || USB_GADGET
+ depends on ARCH_R8A7778 || ARCH_R8A7779 || COMPILE_TEST
+ select USB_PHY
+ help
+ Say Y here to add support for the Renesas R-Car USB common PHY driver.
+ This chip is typically used as USB PHY for USB host, gadget.
+ This driver supports R8A7778 and R8A7779.
+
+ To compile this driver as a module, choose M here: the
+ module will be called phy-rcar-usb.
+
+config USB_RCAR_GEN2_PHY
+ tristate "Renesas R-Car Gen2 USB PHY support"
+ depends on ARCH_R8A7790 || ARCH_R8A7791 || COMPILE_TEST
+ select USB_PHY
+ help
+ Say Y here to add support for the Renesas R-Car Gen2 USB PHY driver.
+ It is typically used to control internal USB PHY for USBHS,
+ and to configure shared USB channels 0 and 2.
+ This driver supports R8A7790 and R8A7791.
+
+ To compile this driver as a module, choose M here: the
+ module will be called phy-rcar-gen2-usb.
+
+config USB_ULPI
+ bool "Generic ULPI Transceiver Driver"
+ depends on ARM || ARM64
+ select USB_ULPI_VIEWPORT
+ help
+ Enable this to support ULPI connected USB OTG transceivers which
+ are likely found on embedded boards.
+
+config USB_ULPI_VIEWPORT
+ bool
+ help
+ Provides read/write operations to the ULPI phy register set for
+ controllers with a viewport register (e.g. Chipidea/ARC controllers).
+
+endmenu
diff --git a/kernel/drivers/usb/phy/Makefile b/kernel/drivers/usb/phy/Makefile
new file mode 100644
index 000000000..75f2bba58
--- /dev/null
+++ b/kernel/drivers/usb/phy/Makefile
@@ -0,0 +1,29 @@
+#
+# Makefile for physical layer USB drivers
+#
+obj-$(CONFIG_USB_PHY) += phy.o
+obj-$(CONFIG_OF) += of.o
+
+# transceiver drivers, keep the list sorted
+
+obj-$(CONFIG_AB8500_USB) += phy-ab8500-usb.o
+obj-$(CONFIG_FSL_USB2_OTG) += phy-fsl-usb.o
+obj-$(CONFIG_ISP1301_OMAP) += phy-isp1301-omap.o
+obj-$(CONFIG_NOP_USB_XCEIV) += phy-generic.o
+obj-$(CONFIG_TAHVO_USB) += phy-tahvo.o
+obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o
+obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o
+obj-$(CONFIG_OMAP_OTG) += phy-omap-otg.o
+obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o
+obj-$(CONFIG_TWL6030_USB) += phy-twl6030-usb.o
+obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o
+obj-$(CONFIG_USB_GPIO_VBUS) += phy-gpio-vbus-usb.o
+obj-$(CONFIG_USB_ISP1301) += phy-isp1301.o
+obj-$(CONFIG_USB_MSM_OTG) += phy-msm-usb.o
+obj-$(CONFIG_USB_MV_OTG) += phy-mv-usb.o
+obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o
+obj-$(CONFIG_USB_RCAR_PHY) += phy-rcar-usb.o
+obj-$(CONFIG_USB_RCAR_GEN2_PHY) += phy-rcar-gen2-usb.o
+obj-$(CONFIG_USB_ULPI) += phy-ulpi.o
+obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o
+obj-$(CONFIG_KEYSTONE_USB_PHY) += phy-keystone.o
diff --git a/kernel/drivers/usb/phy/am35x-phy-control.h b/kernel/drivers/usb/phy/am35x-phy-control.h
new file mode 100644
index 000000000..b96594d19
--- /dev/null
+++ b/kernel/drivers/usb/phy/am35x-phy-control.h
@@ -0,0 +1,21 @@
+#ifndef _AM335x_PHY_CONTROL_H_
+#define _AM335x_PHY_CONTROL_H_
+
+struct phy_control {
+ void (*phy_power)(struct phy_control *phy_ctrl, u32 id, bool on);
+ void (*phy_wkup)(struct phy_control *phy_ctrl, u32 id, bool on);
+};
+
+static inline void phy_ctrl_power(struct phy_control *phy_ctrl, u32 id, bool on)
+{
+ phy_ctrl->phy_power(phy_ctrl, id, on);
+}
+
+static inline void phy_ctrl_wkup(struct phy_control *phy_ctrl, u32 id, bool on)
+{
+ phy_ctrl->phy_wkup(phy_ctrl, id, on);
+}
+
+struct phy_control *am335x_get_phy_control(struct device *dev);
+
+#endif
diff --git a/kernel/drivers/usb/phy/of.c b/kernel/drivers/usb/phy/of.c
new file mode 100644
index 000000000..66ffa8245
--- /dev/null
+++ b/kernel/drivers/usb/phy/of.c
@@ -0,0 +1,47 @@
+/*
+ * USB of helper code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
+
+static const char *const usbphy_modes[] = {
+ [USBPHY_INTERFACE_MODE_UNKNOWN] = "",
+ [USBPHY_INTERFACE_MODE_UTMI] = "utmi",
+ [USBPHY_INTERFACE_MODE_UTMIW] = "utmi_wide",
+ [USBPHY_INTERFACE_MODE_ULPI] = "ulpi",
+ [USBPHY_INTERFACE_MODE_SERIAL] = "serial",
+ [USBPHY_INTERFACE_MODE_HSIC] = "hsic",
+};
+
+/**
+ * of_usb_get_phy_mode - Get phy mode for given device_node
+ * @np: Pointer to the given device_node
+ *
+ * The function gets phy interface string from property 'phy_type',
+ * and returns the corresponding enum usb_phy_interface
+ */
+enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np)
+{
+ const char *phy_type;
+ int err, i;
+
+ err = of_property_read_string(np, "phy_type", &phy_type);
+ if (err < 0)
+ return USBPHY_INTERFACE_MODE_UNKNOWN;
+
+ for (i = 0; i < ARRAY_SIZE(usbphy_modes); i++)
+ if (!strcmp(phy_type, usbphy_modes[i]))
+ return i;
+
+ return USBPHY_INTERFACE_MODE_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(of_usb_get_phy_mode);
diff --git a/kernel/drivers/usb/phy/phy-ab8500-usb.c b/kernel/drivers/usb/phy/phy-ab8500-usb.c
new file mode 100644
index 000000000..03ab0c699
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-ab8500-usb.c
@@ -0,0 +1,1538 @@
+/*
+ * USB transceiver driver for AB8500 family chips
+ *
+ * Copyright (C) 2010-2013 ST-Ericsson AB
+ * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ * Avinash Kumar <avinash.kumar@stericsson.com>
+ * Thirupathi Chippakurthy <thirupathi.chippakurthy@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb/otg.h>
+#include <linux/slab.h>
+#include <linux/notifier.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/usb/musb-ux500.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pinctrl/consumer.h>
+
+/* Bank AB8500_SYS_CTRL2_BLOCK */
+#define AB8500_MAIN_WD_CTRL_REG 0x01
+
+/* Bank AB8500_USB */
+#define AB8500_USB_LINE_STAT_REG 0x80
+#define AB8505_USB_LINE_STAT_REG 0x94
+#define AB8540_USB_LINK_STAT_REG 0x94
+#define AB9540_USB_LINK_STAT_REG 0x94
+#define AB8540_USB_OTG_CTL_REG 0x87
+#define AB8500_USB_PHY_CTRL_REG 0x8A
+#define AB8540_VBUS_CTRL_REG 0x82
+
+/* Bank AB8500_DEVELOPMENT */
+#define AB8500_BANK12_ACCESS 0x00
+
+/* Bank AB8500_DEBUG */
+#define AB8540_DEBUG 0x32
+#define AB8500_USB_PHY_TUNE1 0x05
+#define AB8500_USB_PHY_TUNE2 0x06
+#define AB8500_USB_PHY_TUNE3 0x07
+
+/* Bank AB8500_INTERRUPT */
+#define AB8500_IT_SOURCE2_REG 0x01
+
+#define AB8500_BIT_OTG_STAT_ID (1 << 0)
+#define AB8500_BIT_PHY_CTRL_HOST_EN (1 << 0)
+#define AB8500_BIT_PHY_CTRL_DEVICE_EN (1 << 1)
+#define AB8500_BIT_WD_CTRL_ENABLE (1 << 0)
+#define AB8500_BIT_WD_CTRL_KICK (1 << 1)
+#define AB8500_BIT_SOURCE2_VBUSDET (1 << 7)
+#define AB8540_BIT_OTG_CTL_VBUS_VALID_ENA (1 << 0)
+#define AB8540_BIT_OTG_CTL_ID_HOST_ENA (1 << 1)
+#define AB8540_BIT_OTG_CTL_ID_DEV_ENA (1 << 5)
+#define AB8540_BIT_VBUS_CTRL_CHARG_DET_ENA (1 << 0)
+
+#define AB8500_WD_KICK_DELAY_US 100 /* usec */
+#define AB8500_WD_V11_DISABLE_DELAY_US 100 /* usec */
+#define AB8500_V20_31952_DISABLE_DELAY_US 100 /* usec */
+
+/* Usb line status register */
+enum ab8500_usb_link_status {
+ USB_LINK_NOT_CONFIGURED_8500 = 0,
+ USB_LINK_STD_HOST_NC_8500,
+ USB_LINK_STD_HOST_C_NS_8500,
+ USB_LINK_STD_HOST_C_S_8500,
+ USB_LINK_HOST_CHG_NM_8500,
+ USB_LINK_HOST_CHG_HS_8500,
+ USB_LINK_HOST_CHG_HS_CHIRP_8500,
+ USB_LINK_DEDICATED_CHG_8500,
+ USB_LINK_ACA_RID_A_8500,
+ USB_LINK_ACA_RID_B_8500,
+ USB_LINK_ACA_RID_C_NM_8500,
+ USB_LINK_ACA_RID_C_HS_8500,
+ USB_LINK_ACA_RID_C_HS_CHIRP_8500,
+ USB_LINK_HM_IDGND_8500,
+ USB_LINK_RESERVED_8500,
+ USB_LINK_NOT_VALID_LINK_8500,
+};
+
+enum ab8505_usb_link_status {
+ USB_LINK_NOT_CONFIGURED_8505 = 0,
+ USB_LINK_STD_HOST_NC_8505,
+ USB_LINK_STD_HOST_C_NS_8505,
+ USB_LINK_STD_HOST_C_S_8505,
+ USB_LINK_CDP_8505,
+ USB_LINK_RESERVED0_8505,
+ USB_LINK_RESERVED1_8505,
+ USB_LINK_DEDICATED_CHG_8505,
+ USB_LINK_ACA_RID_A_8505,
+ USB_LINK_ACA_RID_B_8505,
+ USB_LINK_ACA_RID_C_NM_8505,
+ USB_LINK_RESERVED2_8505,
+ USB_LINK_RESERVED3_8505,
+ USB_LINK_HM_IDGND_8505,
+ USB_LINK_CHARGERPORT_NOT_OK_8505,
+ USB_LINK_CHARGER_DM_HIGH_8505,
+ USB_LINK_PHYEN_NO_VBUS_NO_IDGND_8505,
+ USB_LINK_STD_UPSTREAM_NO_IDGNG_NO_VBUS_8505,
+ USB_LINK_STD_UPSTREAM_8505,
+ USB_LINK_CHARGER_SE1_8505,
+ USB_LINK_CARKIT_CHGR_1_8505,
+ USB_LINK_CARKIT_CHGR_2_8505,
+ USB_LINK_ACA_DOCK_CHGR_8505,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_EN_8505,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_DISB_8505,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_EN_8505,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_DISB_8505,
+ USB_LINK_MOTOROLA_FACTORY_CBL_PHY_EN_8505,
+};
+
+enum ab8540_usb_link_status {
+ USB_LINK_NOT_CONFIGURED_8540 = 0,
+ USB_LINK_STD_HOST_NC_8540,
+ USB_LINK_STD_HOST_C_NS_8540,
+ USB_LINK_STD_HOST_C_S_8540,
+ USB_LINK_CDP_8540,
+ USB_LINK_RESERVED0_8540,
+ USB_LINK_RESERVED1_8540,
+ USB_LINK_DEDICATED_CHG_8540,
+ USB_LINK_ACA_RID_A_8540,
+ USB_LINK_ACA_RID_B_8540,
+ USB_LINK_ACA_RID_C_NM_8540,
+ USB_LINK_RESERVED2_8540,
+ USB_LINK_RESERVED3_8540,
+ USB_LINK_HM_IDGND_8540,
+ USB_LINK_CHARGERPORT_NOT_OK_8540,
+ USB_LINK_CHARGER_DM_HIGH_8540,
+ USB_LINK_PHYEN_NO_VBUS_NO_IDGND_8540,
+ USB_LINK_STD_UPSTREAM_NO_IDGNG_VBUS_8540,
+ USB_LINK_STD_UPSTREAM_8540,
+ USB_LINK_CHARGER_SE1_8540,
+ USB_LINK_CARKIT_CHGR_1_8540,
+ USB_LINK_CARKIT_CHGR_2_8540,
+ USB_LINK_ACA_DOCK_CHGR_8540,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_EN_8540,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_DISB_8540,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_EN_8540,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_DISB_8540,
+ USB_LINK_MOTOROLA_FACTORY_CBL_PHY_EN_8540
+};
+
+enum ab9540_usb_link_status {
+ USB_LINK_NOT_CONFIGURED_9540 = 0,
+ USB_LINK_STD_HOST_NC_9540,
+ USB_LINK_STD_HOST_C_NS_9540,
+ USB_LINK_STD_HOST_C_S_9540,
+ USB_LINK_CDP_9540,
+ USB_LINK_RESERVED0_9540,
+ USB_LINK_RESERVED1_9540,
+ USB_LINK_DEDICATED_CHG_9540,
+ USB_LINK_ACA_RID_A_9540,
+ USB_LINK_ACA_RID_B_9540,
+ USB_LINK_ACA_RID_C_NM_9540,
+ USB_LINK_RESERVED2_9540,
+ USB_LINK_RESERVED3_9540,
+ USB_LINK_HM_IDGND_9540,
+ USB_LINK_CHARGERPORT_NOT_OK_9540,
+ USB_LINK_CHARGER_DM_HIGH_9540,
+ USB_LINK_PHYEN_NO_VBUS_NO_IDGND_9540,
+ USB_LINK_STD_UPSTREAM_NO_IDGNG_VBUS_9540,
+ USB_LINK_STD_UPSTREAM_9540,
+ USB_LINK_CHARGER_SE1_9540,
+ USB_LINK_CARKIT_CHGR_1_9540,
+ USB_LINK_CARKIT_CHGR_2_9540,
+ USB_LINK_ACA_DOCK_CHGR_9540,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_EN_9540,
+ USB_LINK_SAMSUNG_BOOT_CBL_PHY_DISB_9540,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_EN_9540,
+ USB_LINK_SAMSUNG_UART_CBL_PHY_DISB_9540,
+ USB_LINK_MOTOROLA_FACTORY_CBL_PHY_EN_9540
+};
+
+enum ab8500_usb_mode {
+ USB_IDLE = 0,
+ USB_PERIPHERAL,
+ USB_HOST,
+ USB_DEDICATED_CHG
+};
+
+/* Register USB_LINK_STATUS interrupt */
+#define AB8500_USB_FLAG_USE_LINK_STATUS_IRQ (1 << 0)
+/* Register ID_WAKEUP_F interrupt */
+#define AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ (1 << 1)
+/* Register VBUS_DET_F interrupt */
+#define AB8500_USB_FLAG_USE_VBUS_DET_IRQ (1 << 2)
+/* Driver is using the ab-iddet driver*/
+#define AB8500_USB_FLAG_USE_AB_IDDET (1 << 3)
+/* Enable setting regulators voltage */
+#define AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE (1 << 4)
+/* Enable the check_vbus_status workaround */
+#define AB8500_USB_FLAG_USE_CHECK_VBUS_STATUS (1 << 5)
+/* Enable the vbus host workaround */
+#define AB8500_USB_FLAG_USE_VBUS_HOST_QUIRK (1 << 6)
+
+struct ab8500_usb {
+ struct usb_phy phy;
+ struct device *dev;
+ struct ab8500 *ab8500;
+ unsigned vbus_draw;
+ struct work_struct phy_dis_work;
+ struct work_struct vbus_event_work;
+ enum ab8500_usb_mode mode;
+ struct clk *sysclk;
+ struct regulator *v_ape;
+ struct regulator *v_musb;
+ struct regulator *v_ulpi;
+ int saved_v_ulpi;
+ int previous_link_status_state;
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pins_sleep;
+ bool enabled_charging_detection;
+ unsigned int flags;
+};
+
+static inline struct ab8500_usb *phy_to_ab(struct usb_phy *x)
+{
+ return container_of(x, struct ab8500_usb, phy);
+}
+
+static void ab8500_usb_wd_workaround(struct ab8500_usb *ab)
+{
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_SYS_CTRL2_BLOCK,
+ AB8500_MAIN_WD_CTRL_REG,
+ AB8500_BIT_WD_CTRL_ENABLE);
+
+ udelay(AB8500_WD_KICK_DELAY_US);
+
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_SYS_CTRL2_BLOCK,
+ AB8500_MAIN_WD_CTRL_REG,
+ (AB8500_BIT_WD_CTRL_ENABLE
+ | AB8500_BIT_WD_CTRL_KICK));
+
+ udelay(AB8500_WD_V11_DISABLE_DELAY_US);
+
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_SYS_CTRL2_BLOCK,
+ AB8500_MAIN_WD_CTRL_REG,
+ 0);
+}
+
+static void ab8500_usb_regulator_enable(struct ab8500_usb *ab)
+{
+ int ret, volt;
+
+ ret = regulator_enable(ab->v_ape);
+ if (ret)
+ dev_err(ab->dev, "Failed to enable v-ape\n");
+
+ if (ab->flags & AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE) {
+ ab->saved_v_ulpi = regulator_get_voltage(ab->v_ulpi);
+ if (ab->saved_v_ulpi < 0)
+ dev_err(ab->dev, "Failed to get v_ulpi voltage\n");
+
+ ret = regulator_set_voltage(ab->v_ulpi, 1300000, 1350000);
+ if (ret < 0)
+ dev_err(ab->dev, "Failed to set the Vintcore to 1.3V, ret=%d\n",
+ ret);
+
+ ret = regulator_set_load(ab->v_ulpi, 28000);
+ if (ret < 0)
+ dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n",
+ ret);
+ }
+
+ ret = regulator_enable(ab->v_ulpi);
+ if (ret)
+ dev_err(ab->dev, "Failed to enable vddulpivio18\n");
+
+ if (ab->flags & AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE) {
+ volt = regulator_get_voltage(ab->v_ulpi);
+ if ((volt != 1300000) && (volt != 1350000))
+ dev_err(ab->dev, "Vintcore is not set to 1.3V volt=%d\n",
+ volt);
+ }
+
+ ret = regulator_enable(ab->v_musb);
+ if (ret)
+ dev_err(ab->dev, "Failed to enable musb_1v8\n");
+}
+
+static void ab8500_usb_regulator_disable(struct ab8500_usb *ab)
+{
+ int ret;
+
+ regulator_disable(ab->v_musb);
+
+ regulator_disable(ab->v_ulpi);
+
+ /* USB is not the only consumer of Vintcore, restore old settings */
+ if (ab->flags & AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE) {
+ if (ab->saved_v_ulpi > 0) {
+ ret = regulator_set_voltage(ab->v_ulpi,
+ ab->saved_v_ulpi, ab->saved_v_ulpi);
+ if (ret < 0)
+ dev_err(ab->dev, "Failed to set the Vintcore to %duV, ret=%d\n",
+ ab->saved_v_ulpi, ret);
+ }
+
+ ret = regulator_set_load(ab->v_ulpi, 0);
+ if (ret < 0)
+ dev_err(ab->dev, "Failed to set optimum mode (ret=%d)\n",
+ ret);
+ }
+
+ regulator_disable(ab->v_ape);
+}
+
+static void ab8500_usb_wd_linkstatus(struct ab8500_usb *ab, u8 bit)
+{
+ /* Workaround for v2.0 bug # 31952 */
+ if (is_ab8500_2p0(ab->ab8500)) {
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ bit, bit);
+ udelay(AB8500_V20_31952_DISABLE_DELAY_US);
+ }
+}
+
+static void ab8500_usb_phy_enable(struct ab8500_usb *ab, bool sel_host)
+{
+ u8 bit;
+ bit = sel_host ? AB8500_BIT_PHY_CTRL_HOST_EN :
+ AB8500_BIT_PHY_CTRL_DEVICE_EN;
+
+ /* mux and configure USB pins to DEFAULT state */
+ ab->pinctrl = pinctrl_get_select(ab->dev, PINCTRL_STATE_DEFAULT);
+ if (IS_ERR(ab->pinctrl))
+ dev_err(ab->dev, "could not get/set default pinstate\n");
+
+ if (clk_prepare_enable(ab->sysclk))
+ dev_err(ab->dev, "can't prepare/enable clock\n");
+
+ ab8500_usb_regulator_enable(ab);
+
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ bit, bit);
+
+ if (ab->flags & AB8500_USB_FLAG_USE_VBUS_HOST_QUIRK) {
+ if (sel_host)
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8540_USB_OTG_CTL_REG,
+ AB8540_BIT_OTG_CTL_VBUS_VALID_ENA |
+ AB8540_BIT_OTG_CTL_ID_HOST_ENA |
+ AB8540_BIT_OTG_CTL_ID_DEV_ENA);
+ }
+}
+
+static void ab8500_usb_phy_disable(struct ab8500_usb *ab, bool sel_host)
+{
+ u8 bit;
+ bit = sel_host ? AB8500_BIT_PHY_CTRL_HOST_EN :
+ AB8500_BIT_PHY_CTRL_DEVICE_EN;
+
+ ab8500_usb_wd_linkstatus(ab, bit);
+
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ bit, 0);
+
+ /* Needed to disable the phy.*/
+ ab8500_usb_wd_workaround(ab);
+
+ clk_disable_unprepare(ab->sysclk);
+
+ ab8500_usb_regulator_disable(ab);
+
+ if (!IS_ERR(ab->pinctrl)) {
+ /* configure USB pins to SLEEP state */
+ ab->pins_sleep = pinctrl_lookup_state(ab->pinctrl,
+ PINCTRL_STATE_SLEEP);
+
+ if (IS_ERR(ab->pins_sleep))
+ dev_dbg(ab->dev, "could not get sleep pinstate\n");
+ else if (pinctrl_select_state(ab->pinctrl, ab->pins_sleep))
+ dev_err(ab->dev, "could not set pins to sleep state\n");
+
+ /*
+ * as USB pins are shared with iddet, release them to allow
+ * iddet to request them
+ */
+ pinctrl_put(ab->pinctrl);
+ }
+}
+
+#define ab8500_usb_host_phy_en(ab) ab8500_usb_phy_enable(ab, true)
+#define ab8500_usb_host_phy_dis(ab) ab8500_usb_phy_disable(ab, true)
+#define ab8500_usb_peri_phy_en(ab) ab8500_usb_phy_enable(ab, false)
+#define ab8500_usb_peri_phy_dis(ab) ab8500_usb_phy_disable(ab, false)
+
+static int ab9540_usb_link_status_update(struct ab8500_usb *ab,
+ enum ab9540_usb_link_status lsts)
+{
+ enum ux500_musb_vbus_id_status event = 0;
+
+ dev_dbg(ab->dev, "ab9540_usb_link_status_update %d\n", lsts);
+
+ if (ab->previous_link_status_state == USB_LINK_HM_IDGND_9540 &&
+ (lsts == USB_LINK_STD_HOST_C_NS_9540 ||
+ lsts == USB_LINK_STD_HOST_NC_9540))
+ return 0;
+
+ if (ab->previous_link_status_state == USB_LINK_ACA_RID_A_9540 &&
+ (lsts == USB_LINK_STD_HOST_NC_9540))
+ return 0;
+
+ ab->previous_link_status_state = lsts;
+
+ switch (lsts) {
+ case USB_LINK_ACA_RID_B_9540:
+ event = UX500_MUSB_RIDB;
+ case USB_LINK_NOT_CONFIGURED_9540:
+ case USB_LINK_RESERVED0_9540:
+ case USB_LINK_RESERVED1_9540:
+ case USB_LINK_RESERVED2_9540:
+ case USB_LINK_RESERVED3_9540:
+ if (ab->mode == USB_PERIPHERAL)
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_CLEAN, &ab->vbus_draw);
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ if (event != UX500_MUSB_RIDB)
+ event = UX500_MUSB_NONE;
+ /* Fallback to default B_IDLE as nothing is connected. */
+ ab->phy.otg->state = OTG_STATE_B_IDLE;
+ usb_phy_set_event(&ab->phy, USB_EVENT_NONE);
+ break;
+
+ case USB_LINK_ACA_RID_C_NM_9540:
+ event = UX500_MUSB_RIDC;
+ case USB_LINK_STD_HOST_NC_9540:
+ case USB_LINK_STD_HOST_C_NS_9540:
+ case USB_LINK_STD_HOST_C_S_9540:
+ case USB_LINK_CDP_9540:
+ if (ab->mode == USB_HOST) {
+ ab->mode = USB_PERIPHERAL;
+ ab8500_usb_host_phy_dis(ab);
+ ab8500_usb_peri_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ usb_phy_set_event(&ab->phy, USB_EVENT_ENUMERATED);
+ }
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_PERIPHERAL;
+ ab8500_usb_peri_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ usb_phy_set_event(&ab->phy, USB_EVENT_ENUMERATED);
+ }
+ if (event != UX500_MUSB_RIDC)
+ event = UX500_MUSB_VBUS;
+ break;
+
+ case USB_LINK_ACA_RID_A_9540:
+ event = UX500_MUSB_RIDA;
+ case USB_LINK_HM_IDGND_9540:
+ case USB_LINK_STD_UPSTREAM_9540:
+ if (ab->mode == USB_PERIPHERAL) {
+ ab->mode = USB_HOST;
+ ab8500_usb_peri_phy_dis(ab);
+ ab8500_usb_host_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_HOST;
+ ab8500_usb_host_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ ab->phy.otg->default_a = true;
+ if (event != UX500_MUSB_RIDA)
+ event = UX500_MUSB_ID;
+
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_DEDICATED_CHG_9540:
+ ab->mode = USB_DEDICATED_CHG;
+ event = UX500_MUSB_CHARGER;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ usb_phy_set_event(&ab->phy, USB_EVENT_CHARGER);
+ break;
+
+ case USB_LINK_PHYEN_NO_VBUS_NO_IDGND_9540:
+ case USB_LINK_STD_UPSTREAM_NO_IDGNG_VBUS_9540:
+ if (!(is_ab9540_2p0_or_earlier(ab->ab8500))) {
+ event = UX500_MUSB_NONE;
+ if (ab->mode == USB_HOST) {
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_host_phy_dis(ab);
+ ab->mode = USB_IDLE;
+ }
+ if (ab->mode == USB_PERIPHERAL) {
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_peri_phy_dis(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_CLEAN,
+ &ab->vbus_draw);
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ usb_phy_set_event(&ab->phy, USB_EVENT_NONE);
+ }
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int ab8540_usb_link_status_update(struct ab8500_usb *ab,
+ enum ab8540_usb_link_status lsts)
+{
+ enum ux500_musb_vbus_id_status event = 0;
+
+ dev_dbg(ab->dev, "ab8540_usb_link_status_update %d\n", lsts);
+
+ if (ab->enabled_charging_detection) {
+ /* Disable USB Charger detection */
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8540_VBUS_CTRL_REG,
+ AB8540_BIT_VBUS_CTRL_CHARG_DET_ENA, 0x00);
+ ab->enabled_charging_detection = false;
+ }
+
+ /*
+ * Spurious link_status interrupts are seen in case of a
+ * disconnection of a device in IDGND and RIDA stage
+ */
+ if (ab->previous_link_status_state == USB_LINK_HM_IDGND_8540 &&
+ (lsts == USB_LINK_STD_HOST_C_NS_8540 ||
+ lsts == USB_LINK_STD_HOST_NC_8540))
+ return 0;
+
+ if (ab->previous_link_status_state == USB_LINK_ACA_RID_A_8540 &&
+ (lsts == USB_LINK_STD_HOST_NC_8540))
+ return 0;
+
+ ab->previous_link_status_state = lsts;
+
+ switch (lsts) {
+ case USB_LINK_ACA_RID_B_8540:
+ event = UX500_MUSB_RIDB;
+ case USB_LINK_NOT_CONFIGURED_8540:
+ case USB_LINK_RESERVED0_8540:
+ case USB_LINK_RESERVED1_8540:
+ case USB_LINK_RESERVED2_8540:
+ case USB_LINK_RESERVED3_8540:
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ if (event != UX500_MUSB_RIDB)
+ event = UX500_MUSB_NONE;
+ /*
+ * Fallback to default B_IDLE as nothing
+ * is connected
+ */
+ ab->phy.otg->state = OTG_STATE_B_IDLE;
+ usb_phy_set_event(&ab->phy, USB_EVENT_NONE);
+ break;
+
+ case USB_LINK_ACA_RID_C_NM_8540:
+ event = UX500_MUSB_RIDC;
+ case USB_LINK_STD_HOST_NC_8540:
+ case USB_LINK_STD_HOST_C_NS_8540:
+ case USB_LINK_STD_HOST_C_S_8540:
+ case USB_LINK_CDP_8540:
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_PERIPHERAL;
+ ab8500_usb_peri_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ usb_phy_set_event(&ab->phy, USB_EVENT_ENUMERATED);
+ }
+ if (event != UX500_MUSB_RIDC)
+ event = UX500_MUSB_VBUS;
+ break;
+
+ case USB_LINK_ACA_RID_A_8540:
+ case USB_LINK_ACA_DOCK_CHGR_8540:
+ event = UX500_MUSB_RIDA;
+ case USB_LINK_HM_IDGND_8540:
+ case USB_LINK_STD_UPSTREAM_8540:
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_HOST;
+ ab8500_usb_host_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ ab->phy.otg->default_a = true;
+ if (event != UX500_MUSB_RIDA)
+ event = UX500_MUSB_ID;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_DEDICATED_CHG_8540:
+ ab->mode = USB_DEDICATED_CHG;
+ event = UX500_MUSB_CHARGER;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ usb_phy_set_event(&ab->phy, USB_EVENT_CHARGER);
+ break;
+
+ case USB_LINK_PHYEN_NO_VBUS_NO_IDGND_8540:
+ case USB_LINK_STD_UPSTREAM_NO_IDGNG_VBUS_8540:
+ event = UX500_MUSB_NONE;
+ if (ab->mode == USB_HOST) {
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_host_phy_dis(ab);
+ ab->mode = USB_IDLE;
+ }
+ if (ab->mode == USB_PERIPHERAL) {
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_peri_phy_dis(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_CLEAN, &ab->vbus_draw);
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ usb_phy_set_event(&ab->phy, USB_EVENT_NONE);
+ }
+ break;
+
+ default:
+ event = UX500_MUSB_NONE;
+ break;
+ }
+
+ return 0;
+}
+
+static int ab8505_usb_link_status_update(struct ab8500_usb *ab,
+ enum ab8505_usb_link_status lsts)
+{
+ enum ux500_musb_vbus_id_status event = 0;
+
+ dev_dbg(ab->dev, "ab8505_usb_link_status_update %d\n", lsts);
+
+ /*
+ * Spurious link_status interrupts are seen at the time of
+ * disconnection of a device in RIDA state
+ */
+ if (ab->previous_link_status_state == USB_LINK_ACA_RID_A_8505 &&
+ (lsts == USB_LINK_STD_HOST_NC_8505))
+ return 0;
+
+ ab->previous_link_status_state = lsts;
+
+ switch (lsts) {
+ case USB_LINK_ACA_RID_B_8505:
+ event = UX500_MUSB_RIDB;
+ case USB_LINK_NOT_CONFIGURED_8505:
+ case USB_LINK_RESERVED0_8505:
+ case USB_LINK_RESERVED1_8505:
+ case USB_LINK_RESERVED2_8505:
+ case USB_LINK_RESERVED3_8505:
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ if (event != UX500_MUSB_RIDB)
+ event = UX500_MUSB_NONE;
+ /*
+ * Fallback to default B_IDLE as nothing
+ * is connected
+ */
+ ab->phy.otg->state = OTG_STATE_B_IDLE;
+ usb_phy_set_event(&ab->phy, USB_EVENT_NONE);
+ break;
+
+ case USB_LINK_ACA_RID_C_NM_8505:
+ event = UX500_MUSB_RIDC;
+ case USB_LINK_STD_HOST_NC_8505:
+ case USB_LINK_STD_HOST_C_NS_8505:
+ case USB_LINK_STD_HOST_C_S_8505:
+ case USB_LINK_CDP_8505:
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_PERIPHERAL;
+ ab8500_usb_peri_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ usb_phy_set_event(&ab->phy, USB_EVENT_ENUMERATED);
+ }
+ if (event != UX500_MUSB_RIDC)
+ event = UX500_MUSB_VBUS;
+ break;
+
+ case USB_LINK_ACA_RID_A_8505:
+ case USB_LINK_ACA_DOCK_CHGR_8505:
+ event = UX500_MUSB_RIDA;
+ case USB_LINK_HM_IDGND_8505:
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_HOST;
+ ab8500_usb_host_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ ab->phy.otg->default_a = true;
+ if (event != UX500_MUSB_RIDA)
+ event = UX500_MUSB_ID;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_DEDICATED_CHG_8505:
+ ab->mode = USB_DEDICATED_CHG;
+ event = UX500_MUSB_CHARGER;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ usb_phy_set_event(&ab->phy, USB_EVENT_CHARGER);
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int ab8500_usb_link_status_update(struct ab8500_usb *ab,
+ enum ab8500_usb_link_status lsts)
+{
+ enum ux500_musb_vbus_id_status event = 0;
+
+ dev_dbg(ab->dev, "ab8500_usb_link_status_update %d\n", lsts);
+
+ /*
+ * Spurious link_status interrupts are seen in case of a
+ * disconnection of a device in IDGND and RIDA stage
+ */
+ if (ab->previous_link_status_state == USB_LINK_HM_IDGND_8500 &&
+ (lsts == USB_LINK_STD_HOST_C_NS_8500 ||
+ lsts == USB_LINK_STD_HOST_NC_8500))
+ return 0;
+
+ if (ab->previous_link_status_state == USB_LINK_ACA_RID_A_8500 &&
+ lsts == USB_LINK_STD_HOST_NC_8500)
+ return 0;
+
+ ab->previous_link_status_state = lsts;
+
+ switch (lsts) {
+ case USB_LINK_ACA_RID_B_8500:
+ event = UX500_MUSB_RIDB;
+ case USB_LINK_NOT_CONFIGURED_8500:
+ case USB_LINK_NOT_VALID_LINK_8500:
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ if (event != UX500_MUSB_RIDB)
+ event = UX500_MUSB_NONE;
+ /* Fallback to default B_IDLE as nothing is connected */
+ ab->phy.otg->state = OTG_STATE_B_IDLE;
+ usb_phy_set_event(&ab->phy, USB_EVENT_NONE);
+ break;
+
+ case USB_LINK_ACA_RID_C_NM_8500:
+ case USB_LINK_ACA_RID_C_HS_8500:
+ case USB_LINK_ACA_RID_C_HS_CHIRP_8500:
+ event = UX500_MUSB_RIDC;
+ case USB_LINK_STD_HOST_NC_8500:
+ case USB_LINK_STD_HOST_C_NS_8500:
+ case USB_LINK_STD_HOST_C_S_8500:
+ case USB_LINK_HOST_CHG_NM_8500:
+ case USB_LINK_HOST_CHG_HS_8500:
+ case USB_LINK_HOST_CHG_HS_CHIRP_8500:
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_PERIPHERAL;
+ ab8500_usb_peri_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ usb_phy_set_event(&ab->phy, USB_EVENT_ENUMERATED);
+ }
+ if (event != UX500_MUSB_RIDC)
+ event = UX500_MUSB_VBUS;
+ break;
+
+ case USB_LINK_ACA_RID_A_8500:
+ event = UX500_MUSB_RIDA;
+ case USB_LINK_HM_IDGND_8500:
+ if (ab->mode == USB_IDLE) {
+ ab->mode = USB_HOST;
+ ab8500_usb_host_phy_en(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_PREPARE, &ab->vbus_draw);
+ }
+ ab->phy.otg->default_a = true;
+ if (event != UX500_MUSB_RIDA)
+ event = UX500_MUSB_ID;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ break;
+
+ case USB_LINK_DEDICATED_CHG_8500:
+ ab->mode = USB_DEDICATED_CHG;
+ event = UX500_MUSB_CHARGER;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ usb_phy_set_event(&ab->phy, USB_EVENT_CHARGER);
+ break;
+
+ case USB_LINK_RESERVED_8500:
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * Connection Sequence:
+ * 1. Link Status Interrupt
+ * 2. Enable AB clock
+ * 3. Enable AB regulators
+ * 4. Enable USB phy
+ * 5. Reset the musb controller
+ * 6. Switch the ULPI GPIO pins to fucntion mode
+ * 7. Enable the musb Peripheral5 clock
+ * 8. Restore MUSB context
+ */
+static int abx500_usb_link_status_update(struct ab8500_usb *ab)
+{
+ u8 reg;
+ int ret = 0;
+
+ if (is_ab8500(ab->ab8500)) {
+ enum ab8500_usb_link_status lsts;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_LINE_STAT_REG, &reg);
+ lsts = (reg >> 3) & 0x0F;
+ ret = ab8500_usb_link_status_update(ab, lsts);
+ } else if (is_ab8505(ab->ab8500)) {
+ enum ab8505_usb_link_status lsts;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_USB, AB8505_USB_LINE_STAT_REG, &reg);
+ lsts = (reg >> 3) & 0x1F;
+ ret = ab8505_usb_link_status_update(ab, lsts);
+ } else if (is_ab8540(ab->ab8500)) {
+ enum ab8540_usb_link_status lsts;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_USB, AB8540_USB_LINK_STAT_REG, &reg);
+ lsts = (reg >> 3) & 0xFF;
+ ret = ab8540_usb_link_status_update(ab, lsts);
+ } else if (is_ab9540(ab->ab8500)) {
+ enum ab9540_usb_link_status lsts;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_USB, AB9540_USB_LINK_STAT_REG, &reg);
+ lsts = (reg >> 3) & 0xFF;
+ ret = ab9540_usb_link_status_update(ab, lsts);
+ }
+
+ return ret;
+}
+
+/*
+ * Disconnection Sequence:
+ * 1. Disconnect Interrupt
+ * 2. Disable regulators
+ * 3. Disable AB clock
+ * 4. Disable the Phy
+ * 5. Link Status Interrupt
+ * 6. Disable Musb Clock
+ */
+static irqreturn_t ab8500_usb_disconnect_irq(int irq, void *data)
+{
+ struct ab8500_usb *ab = (struct ab8500_usb *) data;
+ enum usb_phy_events event = UX500_MUSB_NONE;
+
+ /* Link status will not be updated till phy is disabled. */
+ if (ab->mode == USB_HOST) {
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_host_phy_dis(ab);
+ ab->mode = USB_IDLE;
+ }
+
+ if (ab->mode == USB_PERIPHERAL) {
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ event, &ab->vbus_draw);
+ ab8500_usb_peri_phy_dis(ab);
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_CLEAN, &ab->vbus_draw);
+ ab->mode = USB_IDLE;
+ ab->phy.otg->default_a = false;
+ ab->vbus_draw = 0;
+ }
+
+ if (is_ab8500_2p0(ab->ab8500)) {
+ if (ab->mode == USB_DEDICATED_CHG) {
+ ab8500_usb_wd_linkstatus(ab,
+ AB8500_BIT_PHY_CTRL_DEVICE_EN);
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ AB8500_BIT_PHY_CTRL_DEVICE_EN, 0);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ab8500_usb_link_status_irq(int irq, void *data)
+{
+ struct ab8500_usb *ab = (struct ab8500_usb *)data;
+
+ abx500_usb_link_status_update(ab);
+
+ return IRQ_HANDLED;
+}
+
+static void ab8500_usb_phy_disable_work(struct work_struct *work)
+{
+ struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
+ phy_dis_work);
+
+ if (!ab->phy.otg->host)
+ ab8500_usb_host_phy_dis(ab);
+
+ if (!ab->phy.otg->gadget)
+ ab8500_usb_peri_phy_dis(ab);
+}
+
+/* Check if VBUS is set and linkstatus has not detected a cable. */
+static bool ab8500_usb_check_vbus_status(struct ab8500_usb *ab)
+{
+ u8 isource2;
+ u8 reg;
+ enum ab8540_usb_link_status lsts;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_INTERRUPT, AB8500_IT_SOURCE2_REG,
+ &isource2);
+
+ /* If Vbus is below 3.6V abort */
+ if (!(isource2 & AB8500_BIT_SOURCE2_VBUSDET))
+ return false;
+
+ abx500_get_register_interruptible(ab->dev,
+ AB8500_USB, AB8540_USB_LINK_STAT_REG,
+ &reg);
+
+ lsts = (reg >> 3) & 0xFF;
+
+ /* Check if linkstatus has detected a cable */
+ if (lsts)
+ return false;
+
+ return true;
+}
+
+/* re-trigger charger detection again with watchdog re-kick. */
+static void ab8500_usb_vbus_turn_on_event_work(struct work_struct *work)
+{
+ struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
+ vbus_event_work);
+
+ if (ab->mode != USB_IDLE)
+ return;
+
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_SYS_CTRL2_BLOCK, AB8500_MAIN_WD_CTRL_REG,
+ AB8500_BIT_WD_CTRL_ENABLE);
+
+ udelay(100);
+
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_SYS_CTRL2_BLOCK, AB8500_MAIN_WD_CTRL_REG,
+ AB8500_BIT_WD_CTRL_ENABLE | AB8500_BIT_WD_CTRL_KICK);
+
+ udelay(100);
+
+ /* Disable Main watchdog */
+ abx500_set_register_interruptible(ab->dev,
+ AB8500_SYS_CTRL2_BLOCK, AB8500_MAIN_WD_CTRL_REG,
+ 0x0);
+
+ /* Enable USB Charger detection */
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8540_VBUS_CTRL_REG,
+ AB8540_BIT_VBUS_CTRL_CHARG_DET_ENA,
+ AB8540_BIT_VBUS_CTRL_CHARG_DET_ENA);
+
+ ab->enabled_charging_detection = true;
+}
+
+static unsigned ab8500_eyediagram_workaroud(struct ab8500_usb *ab, unsigned mA)
+{
+ /*
+ * AB8500 V2 has eye diagram issues when drawing more than 100mA from
+ * VBUS. Set charging current to 100mA in case of standard host
+ */
+ if (is_ab8500_2p0_or_earlier(ab->ab8500))
+ if (mA > 100)
+ mA = 100;
+
+ return mA;
+}
+
+static int ab8500_usb_set_power(struct usb_phy *phy, unsigned mA)
+{
+ struct ab8500_usb *ab;
+
+ if (!phy)
+ return -ENODEV;
+
+ ab = phy_to_ab(phy);
+
+ mA = ab8500_eyediagram_workaroud(ab, mA);
+
+ ab->vbus_draw = mA;
+
+ atomic_notifier_call_chain(&ab->phy.notifier,
+ UX500_MUSB_VBUS, &ab->vbus_draw);
+
+ return 0;
+}
+
+static int ab8500_usb_set_suspend(struct usb_phy *x, int suspend)
+{
+ /* TODO */
+ return 0;
+}
+
+static int ab8500_usb_set_peripheral(struct usb_otg *otg,
+ struct usb_gadget *gadget)
+{
+ struct ab8500_usb *ab;
+
+ if (!otg)
+ return -ENODEV;
+
+ ab = phy_to_ab(otg->usb_phy);
+
+ ab->phy.otg->gadget = gadget;
+
+ /* Some drivers call this function in atomic context.
+ * Do not update ab8500 registers directly till this
+ * is fixed.
+ */
+
+ if ((ab->mode != USB_IDLE) && !gadget) {
+ ab->mode = USB_IDLE;
+ schedule_work(&ab->phy_dis_work);
+ }
+
+ return 0;
+}
+
+static int ab8500_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ struct ab8500_usb *ab;
+
+ if (!otg)
+ return -ENODEV;
+
+ ab = phy_to_ab(otg->usb_phy);
+
+ ab->phy.otg->host = host;
+
+ /* Some drivers call this function in atomic context.
+ * Do not update ab8500 registers directly till this
+ * is fixed.
+ */
+
+ if ((ab->mode != USB_IDLE) && !host) {
+ ab->mode = USB_IDLE;
+ schedule_work(&ab->phy_dis_work);
+ }
+
+ return 0;
+}
+
+static void ab8500_usb_restart_phy(struct ab8500_usb *ab)
+{
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ AB8500_BIT_PHY_CTRL_DEVICE_EN,
+ AB8500_BIT_PHY_CTRL_DEVICE_EN);
+
+ udelay(100);
+
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ AB8500_BIT_PHY_CTRL_DEVICE_EN,
+ 0);
+
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ AB8500_BIT_PHY_CTRL_HOST_EN,
+ AB8500_BIT_PHY_CTRL_HOST_EN);
+
+ udelay(100);
+
+ abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_USB, AB8500_USB_PHY_CTRL_REG,
+ AB8500_BIT_PHY_CTRL_HOST_EN,
+ 0);
+}
+
+static int ab8500_usb_regulator_get(struct ab8500_usb *ab)
+{
+ int err;
+
+ ab->v_ape = devm_regulator_get(ab->dev, "v-ape");
+ if (IS_ERR(ab->v_ape)) {
+ dev_err(ab->dev, "Could not get v-ape supply\n");
+ err = PTR_ERR(ab->v_ape);
+ return err;
+ }
+
+ ab->v_ulpi = devm_regulator_get(ab->dev, "vddulpivio18");
+ if (IS_ERR(ab->v_ulpi)) {
+ dev_err(ab->dev, "Could not get vddulpivio18 supply\n");
+ err = PTR_ERR(ab->v_ulpi);
+ return err;
+ }
+
+ ab->v_musb = devm_regulator_get(ab->dev, "musb_1v8");
+ if (IS_ERR(ab->v_musb)) {
+ dev_err(ab->dev, "Could not get musb_1v8 supply\n");
+ err = PTR_ERR(ab->v_musb);
+ return err;
+ }
+
+ return 0;
+}
+
+static int ab8500_usb_irq_setup(struct platform_device *pdev,
+ struct ab8500_usb *ab)
+{
+ int err;
+ int irq;
+
+ if (ab->flags & AB8500_USB_FLAG_USE_LINK_STATUS_IRQ) {
+ irq = platform_get_irq_byname(pdev, "USB_LINK_STATUS");
+ if (irq < 0) {
+ dev_err(&pdev->dev, "Link status irq not found\n");
+ return irq;
+ }
+ err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ ab8500_usb_link_status_irq,
+ IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
+ "usb-link-status", ab);
+ if (err < 0) {
+ dev_err(ab->dev, "request_irq failed for link status irq\n");
+ return err;
+ }
+ }
+
+ if (ab->flags & AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ) {
+ irq = platform_get_irq_byname(pdev, "ID_WAKEUP_F");
+ if (irq < 0) {
+ dev_err(&pdev->dev, "ID fall irq not found\n");
+ return irq;
+ }
+ err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ ab8500_usb_disconnect_irq,
+ IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
+ "usb-id-fall", ab);
+ if (err < 0) {
+ dev_err(ab->dev, "request_irq failed for ID fall irq\n");
+ return err;
+ }
+ }
+
+ if (ab->flags & AB8500_USB_FLAG_USE_VBUS_DET_IRQ) {
+ irq = platform_get_irq_byname(pdev, "VBUS_DET_F");
+ if (irq < 0) {
+ dev_err(&pdev->dev, "VBUS fall irq not found\n");
+ return irq;
+ }
+ err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ ab8500_usb_disconnect_irq,
+ IRQF_NO_SUSPEND | IRQF_SHARED | IRQF_ONESHOT,
+ "usb-vbus-fall", ab);
+ if (err < 0) {
+ dev_err(ab->dev, "request_irq failed for Vbus fall irq\n");
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+static void ab8500_usb_set_ab8500_tuning_values(struct ab8500_usb *ab)
+{
+ int err;
+
+ /* Enable the PBT/Bank 0x12 access */
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x01);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE1, 0xC8);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE2, 0x00);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x78);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
+ err);
+
+ /* Switch to normal mode/disable Bank 0x12 access */
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x00);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
+ err);
+}
+
+static void ab8500_usb_set_ab8505_tuning_values(struct ab8500_usb *ab)
+{
+ int err;
+
+ /* Enable the PBT/Bank 0x12 access */
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS,
+ 0x01, 0x01);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
+ err);
+
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE1,
+ 0xC8, 0xC8);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
+ err);
+
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE2,
+ 0x60, 0x60);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
+ err);
+
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE3,
+ 0xFC, 0x80);
+
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
+ err);
+
+ /* Switch to normal mode/disable Bank 0x12 access */
+ err = abx500_mask_and_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS,
+ 0x00, 0x00);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
+ err);
+}
+
+static void ab8500_usb_set_ab8540_tuning_values(struct ab8500_usb *ab)
+{
+ int err;
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8540_DEBUG, AB8500_USB_PHY_TUNE1, 0xCC);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE1 register ret=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8540_DEBUG, AB8500_USB_PHY_TUNE2, 0x60);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE2 register ret=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8540_DEBUG, AB8500_USB_PHY_TUNE3, 0x90);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 regester ret=%d\n",
+ err);
+}
+
+static void ab8500_usb_set_ab9540_tuning_values(struct ab8500_usb *ab)
+{
+ int err;
+
+ /* Enable the PBT/Bank 0x12 access */
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x01);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to enable bank12 access err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE1, 0xC8);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE1 register err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE2, 0x60);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE2 register err=%d\n",
+ err);
+
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x80);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n",
+ err);
+
+ /* Switch to normal mode/disable Bank 0x12 access */
+ err = abx500_set_register_interruptible(ab->dev,
+ AB8500_DEVELOPMENT, AB8500_BANK12_ACCESS, 0x00);
+ if (err < 0)
+ dev_err(ab->dev, "Failed to switch bank12 access err=%d\n",
+ err);
+}
+
+static int ab8500_usb_probe(struct platform_device *pdev)
+{
+ struct ab8500_usb *ab;
+ struct ab8500 *ab8500;
+ struct usb_otg *otg;
+ int err;
+ int rev;
+
+ ab8500 = dev_get_drvdata(pdev->dev.parent);
+ rev = abx500_get_chip_id(&pdev->dev);
+
+ if (is_ab8500_1p1_or_earlier(ab8500)) {
+ dev_err(&pdev->dev, "Unsupported AB8500 chip rev=%d\n", rev);
+ return -ENODEV;
+ }
+
+ ab = devm_kzalloc(&pdev->dev, sizeof(*ab), GFP_KERNEL);
+ if (!ab)
+ return -ENOMEM;
+
+ otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+ if (!otg)
+ return -ENOMEM;
+
+ ab->dev = &pdev->dev;
+ ab->ab8500 = ab8500;
+ ab->phy.dev = ab->dev;
+ ab->phy.otg = otg;
+ ab->phy.label = "ab8500";
+ ab->phy.set_suspend = ab8500_usb_set_suspend;
+ ab->phy.set_power = ab8500_usb_set_power;
+ ab->phy.otg->state = OTG_STATE_UNDEFINED;
+
+ otg->usb_phy = &ab->phy;
+ otg->set_host = ab8500_usb_set_host;
+ otg->set_peripheral = ab8500_usb_set_peripheral;
+
+ if (is_ab8500(ab->ab8500)) {
+ ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+ AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ |
+ AB8500_USB_FLAG_USE_VBUS_DET_IRQ |
+ AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+ } else if (is_ab8505(ab->ab8500)) {
+ ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+ AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ |
+ AB8500_USB_FLAG_USE_VBUS_DET_IRQ |
+ AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+ } else if (is_ab8540(ab->ab8500)) {
+ ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+ AB8500_USB_FLAG_USE_CHECK_VBUS_STATUS |
+ AB8500_USB_FLAG_USE_VBUS_HOST_QUIRK |
+ AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+ } else if (is_ab9540(ab->ab8500)) {
+ ab->flags |= AB8500_USB_FLAG_USE_LINK_STATUS_IRQ |
+ AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+ if (is_ab9540_2p0_or_earlier(ab->ab8500))
+ ab->flags |= AB8500_USB_FLAG_USE_ID_WAKEUP_IRQ |
+ AB8500_USB_FLAG_USE_VBUS_DET_IRQ;
+ }
+
+ /* Disable regulator voltage setting for AB8500 <= v2.0 */
+ if (is_ab8500_2p0_or_earlier(ab->ab8500))
+ ab->flags &= ~AB8500_USB_FLAG_REGULATOR_SET_VOLTAGE;
+
+ platform_set_drvdata(pdev, ab);
+
+ /* all: Disable phy when called from set_host and set_peripheral */
+ INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work);
+
+ INIT_WORK(&ab->vbus_event_work, ab8500_usb_vbus_turn_on_event_work);
+
+ err = ab8500_usb_regulator_get(ab);
+ if (err)
+ return err;
+
+ ab->sysclk = devm_clk_get(ab->dev, "sysclk");
+ if (IS_ERR(ab->sysclk)) {
+ dev_err(ab->dev, "Could not get sysclk.\n");
+ return PTR_ERR(ab->sysclk);
+ }
+
+ err = ab8500_usb_irq_setup(pdev, ab);
+ if (err < 0)
+ return err;
+
+ err = usb_add_phy(&ab->phy, USB_PHY_TYPE_USB2);
+ if (err) {
+ dev_err(&pdev->dev, "Can't register transceiver\n");
+ return err;
+ }
+
+ if (is_ab8500(ab->ab8500) && !is_ab8500_2p0_or_earlier(ab->ab8500))
+ /* Phy tuning values for AB8500 > v2.0 */
+ ab8500_usb_set_ab8500_tuning_values(ab);
+ else if (is_ab8505(ab->ab8500))
+ /* Phy tuning values for AB8505 */
+ ab8500_usb_set_ab8505_tuning_values(ab);
+ else if (is_ab8540(ab->ab8500))
+ /* Phy tuning values for AB8540 */
+ ab8500_usb_set_ab8540_tuning_values(ab);
+ else if (is_ab9540(ab->ab8500))
+ /* Phy tuning values for AB9540 */
+ ab8500_usb_set_ab9540_tuning_values(ab);
+
+ /* Needed to enable ID detection. */
+ ab8500_usb_wd_workaround(ab);
+
+ /*
+ * This is required for usb-link-status to work properly when a
+ * cable is connected at boot time.
+ */
+ ab8500_usb_restart_phy(ab);
+
+ if (ab->flags & AB8500_USB_FLAG_USE_CHECK_VBUS_STATUS) {
+ if (ab8500_usb_check_vbus_status(ab))
+ schedule_work(&ab->vbus_event_work);
+ }
+
+ abx500_usb_link_status_update(ab);
+
+ dev_info(&pdev->dev, "revision 0x%2x driver initialized\n", rev);
+
+ return 0;
+}
+
+static int ab8500_usb_remove(struct platform_device *pdev)
+{
+ struct ab8500_usb *ab = platform_get_drvdata(pdev);
+
+ cancel_work_sync(&ab->phy_dis_work);
+ cancel_work_sync(&ab->vbus_event_work);
+
+ usb_remove_phy(&ab->phy);
+
+ if (ab->mode == USB_HOST)
+ ab8500_usb_host_phy_dis(ab);
+ else if (ab->mode == USB_PERIPHERAL)
+ ab8500_usb_peri_phy_dis(ab);
+
+ return 0;
+}
+
+static struct platform_device_id ab8500_usb_devtype[] = {
+ { .name = "ab8500-usb", },
+ { .name = "ab8540-usb", },
+ { .name = "ab9540-usb", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, ab8500_usb_devtype);
+
+static struct platform_driver ab8500_usb_driver = {
+ .probe = ab8500_usb_probe,
+ .remove = ab8500_usb_remove,
+ .id_table = ab8500_usb_devtype,
+ .driver = {
+ .name = "abx5x0-usb",
+ },
+};
+
+static int __init ab8500_usb_init(void)
+{
+ return platform_driver_register(&ab8500_usb_driver);
+}
+subsys_initcall(ab8500_usb_init);
+
+static void __exit ab8500_usb_exit(void)
+{
+ platform_driver_unregister(&ab8500_usb_driver);
+}
+module_exit(ab8500_usb_exit);
+
+MODULE_AUTHOR("ST-Ericsson AB");
+MODULE_DESCRIPTION("AB8500 family usb transceiver driver");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/usb/phy/phy-am335x-control.c b/kernel/drivers/usb/phy/phy-am335x-control.c
new file mode 100644
index 000000000..7b3035ff9
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-am335x-control.c
@@ -0,0 +1,184 @@
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include "am35x-phy-control.h"
+
+struct am335x_control_usb {
+ struct device *dev;
+ void __iomem *phy_reg;
+ void __iomem *wkup;
+ spinlock_t lock;
+ struct phy_control phy_ctrl;
+};
+
+#define AM335X_USB0_CTRL 0x0
+#define AM335X_USB1_CTRL 0x8
+#define AM335x_USB_WKUP 0x0
+
+#define USBPHY_CM_PWRDN (1 << 0)
+#define USBPHY_OTG_PWRDN (1 << 1)
+#define USBPHY_OTGVDET_EN (1 << 19)
+#define USBPHY_OTGSESSEND_EN (1 << 20)
+
+#define AM335X_PHY0_WK_EN (1 << 0)
+#define AM335X_PHY1_WK_EN (1 << 8)
+
+static void am335x_phy_wkup(struct phy_control *phy_ctrl, u32 id, bool on)
+{
+ struct am335x_control_usb *usb_ctrl;
+ u32 val;
+ u32 reg;
+
+ usb_ctrl = container_of(phy_ctrl, struct am335x_control_usb, phy_ctrl);
+
+ switch (id) {
+ case 0:
+ reg = AM335X_PHY0_WK_EN;
+ break;
+ case 1:
+ reg = AM335X_PHY1_WK_EN;
+ break;
+ default:
+ WARN_ON(1);
+ return;
+ }
+
+ spin_lock(&usb_ctrl->lock);
+ val = readl(usb_ctrl->wkup);
+
+ if (on)
+ val |= reg;
+ else
+ val &= ~reg;
+
+ writel(val, usb_ctrl->wkup);
+ spin_unlock(&usb_ctrl->lock);
+}
+
+static void am335x_phy_power(struct phy_control *phy_ctrl, u32 id, bool on)
+{
+ struct am335x_control_usb *usb_ctrl;
+ u32 val;
+ u32 reg;
+
+ usb_ctrl = container_of(phy_ctrl, struct am335x_control_usb, phy_ctrl);
+
+ switch (id) {
+ case 0:
+ reg = AM335X_USB0_CTRL;
+ break;
+ case 1:
+ reg = AM335X_USB1_CTRL;
+ break;
+ default:
+ WARN_ON(1);
+ return;
+ }
+
+ val = readl(usb_ctrl->phy_reg + reg);
+ if (on) {
+ val &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN);
+ val |= USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN;
+ } else {
+ val |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN;
+ }
+
+ writel(val, usb_ctrl->phy_reg + reg);
+
+ /*
+ * Give the PHY ~1ms to complete the power up operation.
+ * Tests have shown unstable behaviour if other USB PHY related
+ * registers are written too shortly after such a transition.
+ */
+ if (on)
+ mdelay(1);
+}
+
+static const struct phy_control ctrl_am335x = {
+ .phy_power = am335x_phy_power,
+ .phy_wkup = am335x_phy_wkup,
+};
+
+static const struct of_device_id omap_control_usb_id_table[] = {
+ { .compatible = "ti,am335x-usb-ctrl-module", .data = &ctrl_am335x },
+ {}
+};
+MODULE_DEVICE_TABLE(of, omap_control_usb_id_table);
+
+static struct platform_driver am335x_control_driver;
+static int match(struct device *dev, void *data)
+{
+ struct device_node *node = (struct device_node *)data;
+ return dev->of_node == node &&
+ dev->driver == &am335x_control_driver.driver;
+}
+
+struct phy_control *am335x_get_phy_control(struct device *dev)
+{
+ struct device_node *node;
+ struct am335x_control_usb *ctrl_usb;
+
+ node = of_parse_phandle(dev->of_node, "ti,ctrl_mod", 0);
+ if (!node)
+ return NULL;
+
+ dev = bus_find_device(&platform_bus_type, NULL, node, match);
+ if (!dev)
+ return NULL;
+
+ ctrl_usb = dev_get_drvdata(dev);
+ if (!ctrl_usb)
+ return NULL;
+ return &ctrl_usb->phy_ctrl;
+}
+EXPORT_SYMBOL_GPL(am335x_get_phy_control);
+
+static int am335x_control_usb_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct am335x_control_usb *ctrl_usb;
+ const struct of_device_id *of_id;
+ const struct phy_control *phy_ctrl;
+
+ of_id = of_match_node(omap_control_usb_id_table, pdev->dev.of_node);
+ if (!of_id)
+ return -EINVAL;
+
+ phy_ctrl = of_id->data;
+
+ ctrl_usb = devm_kzalloc(&pdev->dev, sizeof(*ctrl_usb), GFP_KERNEL);
+ if (!ctrl_usb)
+ return -ENOMEM;
+
+ ctrl_usb->dev = &pdev->dev;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
+ ctrl_usb->phy_reg = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ctrl_usb->phy_reg))
+ return PTR_ERR(ctrl_usb->phy_reg);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "wakeup");
+ ctrl_usb->wkup = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ctrl_usb->wkup))
+ return PTR_ERR(ctrl_usb->wkup);
+
+ spin_lock_init(&ctrl_usb->lock);
+ ctrl_usb->phy_ctrl = *phy_ctrl;
+
+ dev_set_drvdata(ctrl_usb->dev, ctrl_usb);
+ return 0;
+}
+
+static struct platform_driver am335x_control_driver = {
+ .probe = am335x_control_usb_probe,
+ .driver = {
+ .name = "am335x-control-usb",
+ .of_match_table = omap_control_usb_id_table,
+ },
+};
+
+module_platform_driver(am335x_control_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/usb/phy/phy-am335x.c b/kernel/drivers/usb/phy/phy-am335x.c
new file mode 100644
index 000000000..90b67a4ca
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-am335x.c
@@ -0,0 +1,146 @@
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/usb_phy_generic.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "am35x-phy-control.h"
+#include "phy-generic.h"
+
+struct am335x_phy {
+ struct usb_phy_generic usb_phy_gen;
+ struct phy_control *phy_ctrl;
+ int id;
+};
+
+static int am335x_init(struct usb_phy *phy)
+{
+ struct am335x_phy *am_phy = dev_get_drvdata(phy->dev);
+
+ phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, true);
+ return 0;
+}
+
+static void am335x_shutdown(struct usb_phy *phy)
+{
+ struct am335x_phy *am_phy = dev_get_drvdata(phy->dev);
+
+ phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, false);
+}
+
+static int am335x_phy_probe(struct platform_device *pdev)
+{
+ struct am335x_phy *am_phy;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ am_phy = devm_kzalloc(dev, sizeof(*am_phy), GFP_KERNEL);
+ if (!am_phy)
+ return -ENOMEM;
+
+ am_phy->phy_ctrl = am335x_get_phy_control(dev);
+ if (!am_phy->phy_ctrl)
+ return -EPROBE_DEFER;
+ am_phy->id = of_alias_get_id(pdev->dev.of_node, "phy");
+ if (am_phy->id < 0) {
+ dev_err(&pdev->dev, "Missing PHY id: %d\n", am_phy->id);
+ return am_phy->id;
+ }
+
+ ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen, NULL);
+ if (ret)
+ return ret;
+
+ ret = usb_add_phy_dev(&am_phy->usb_phy_gen.phy);
+ if (ret)
+ return ret;
+ am_phy->usb_phy_gen.phy.init = am335x_init;
+ am_phy->usb_phy_gen.phy.shutdown = am335x_shutdown;
+
+ platform_set_drvdata(pdev, am_phy);
+ device_init_wakeup(dev, true);
+
+ /*
+ * If we leave PHY wakeup enabled then AM33XX wakes up
+ * immediately from DS0. To avoid this we mark dev->power.can_wakeup
+ * to false. The same is checked in suspend routine to decide
+ * on whether to enable PHY wakeup or not.
+ * PHY wakeup works fine in standby mode, there by allowing us to
+ * handle remote wakeup, wakeup on disconnect and connect.
+ */
+
+ device_set_wakeup_enable(dev, false);
+ phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, false);
+
+ return 0;
+}
+
+static int am335x_phy_remove(struct platform_device *pdev)
+{
+ struct am335x_phy *am_phy = platform_get_drvdata(pdev);
+
+ usb_remove_phy(&am_phy->usb_phy_gen.phy);
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int am335x_phy_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct am335x_phy *am_phy = platform_get_drvdata(pdev);
+
+ /*
+ * Enable phy wakeup only if dev->power.can_wakeup is true.
+ * Make sure to enable wakeup to support remote wakeup in
+ * standby mode ( same is not supported in OFF(DS0) mode).
+ * Enable it by doing
+ * echo enabled > /sys/bus/platform/devices/<usb-phy-id>/power/wakeup
+ */
+
+ if (device_may_wakeup(dev))
+ phy_ctrl_wkup(am_phy->phy_ctrl, am_phy->id, true);
+
+ phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, false);
+
+ return 0;
+}
+
+static int am335x_phy_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct am335x_phy *am_phy = platform_get_drvdata(pdev);
+
+ phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, true);
+
+ if (device_may_wakeup(dev))
+ phy_ctrl_wkup(am_phy->phy_ctrl, am_phy->id, false);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(am335x_pm_ops, am335x_phy_suspend, am335x_phy_resume);
+
+static const struct of_device_id am335x_phy_ids[] = {
+ { .compatible = "ti,am335x-usb-phy" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, am335x_phy_ids);
+
+static struct platform_driver am335x_phy_driver = {
+ .probe = am335x_phy_probe,
+ .remove = am335x_phy_remove,
+ .driver = {
+ .name = "am335x-phy-driver",
+ .pm = &am335x_pm_ops,
+ .of_match_table = am335x_phy_ids,
+ },
+};
+
+module_platform_driver(am335x_phy_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/usb/phy/phy-fsl-usb.c b/kernel/drivers/usb/phy/phy-fsl-usb.c
new file mode 100644
index 000000000..94eb2923a
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-fsl-usb.c
@@ -0,0 +1,1194 @@
+/*
+ * Copyright (C) 2007,2008 Freescale semiconductor, Inc.
+ *
+ * Author: Li Yang <LeoLi@freescale.com>
+ * Jerry Huang <Chang-Ming.Huang@freescale.com>
+ *
+ * Initialization based on code from Shlomi Gridish.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/timer.h>
+#include <linux/usb.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/workqueue.h>
+#include <linux/time.h>
+#include <linux/fsl_devices.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+
+#include <asm/unaligned.h>
+
+#include "phy-fsl-usb.h"
+
+#define DRIVER_VERSION "Rev. 1.55"
+#define DRIVER_AUTHOR "Jerry Huang/Li Yang"
+#define DRIVER_DESC "Freescale USB OTG Transceiver Driver"
+#define DRIVER_INFO DRIVER_DESC " " DRIVER_VERSION
+
+static const char driver_name[] = "fsl-usb2-otg";
+
+const pm_message_t otg_suspend_state = {
+ .event = 1,
+};
+
+#define HA_DATA_PULSE
+
+static struct usb_dr_mmap *usb_dr_regs;
+static struct fsl_otg *fsl_otg_dev;
+static int srp_wait_done;
+
+/* FSM timers */
+struct fsl_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr, *a_aidl_bdis_tmr,
+ *b_ase0_brst_tmr, *b_se0_srp_tmr;
+
+/* Driver specific timers */
+struct fsl_otg_timer *b_data_pulse_tmr, *b_vbus_pulse_tmr, *b_srp_fail_tmr,
+ *b_srp_wait_tmr, *a_wait_enum_tmr;
+
+static struct list_head active_timers;
+
+static struct fsl_otg_config fsl_otg_initdata = {
+ .otg_port = 1,
+};
+
+#ifdef CONFIG_PPC32
+static u32 _fsl_readl_be(const unsigned __iomem *p)
+{
+ return in_be32(p);
+}
+
+static u32 _fsl_readl_le(const unsigned __iomem *p)
+{
+ return in_le32(p);
+}
+
+static void _fsl_writel_be(u32 v, unsigned __iomem *p)
+{
+ out_be32(p, v);
+}
+
+static void _fsl_writel_le(u32 v, unsigned __iomem *p)
+{
+ out_le32(p, v);
+}
+
+static u32 (*_fsl_readl)(const unsigned __iomem *p);
+static void (*_fsl_writel)(u32 v, unsigned __iomem *p);
+
+#define fsl_readl(p) (*_fsl_readl)((p))
+#define fsl_writel(v, p) (*_fsl_writel)((v), (p))
+
+#else
+#define fsl_readl(addr) readl(addr)
+#define fsl_writel(val, addr) writel(val, addr)
+#endif /* CONFIG_PPC32 */
+
+int write_ulpi(u8 addr, u8 data)
+{
+ u32 temp;
+
+ temp = 0x60000000 | (addr << 16) | data;
+ fsl_writel(temp, &usb_dr_regs->ulpiview);
+ return 0;
+}
+
+/* -------------------------------------------------------------*/
+/* Operations that will be called from OTG Finite State Machine */
+
+/* Charge vbus for vbus pulsing in SRP */
+void fsl_otg_chrg_vbus(struct otg_fsm *fsm, int on)
+{
+ u32 tmp;
+
+ tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
+
+ if (on)
+ /* stop discharging, start charging */
+ tmp = (tmp & ~OTGSC_CTRL_VBUS_DISCHARGE) |
+ OTGSC_CTRL_VBUS_CHARGE;
+ else
+ /* stop charging */
+ tmp &= ~OTGSC_CTRL_VBUS_CHARGE;
+
+ fsl_writel(tmp, &usb_dr_regs->otgsc);
+}
+
+/* Discharge vbus through a resistor to ground */
+void fsl_otg_dischrg_vbus(int on)
+{
+ u32 tmp;
+
+ tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
+
+ if (on)
+ /* stop charging, start discharging */
+ tmp = (tmp & ~OTGSC_CTRL_VBUS_CHARGE) |
+ OTGSC_CTRL_VBUS_DISCHARGE;
+ else
+ /* stop discharging */
+ tmp &= ~OTGSC_CTRL_VBUS_DISCHARGE;
+
+ fsl_writel(tmp, &usb_dr_regs->otgsc);
+}
+
+/* A-device driver vbus, controlled through PP bit in PORTSC */
+void fsl_otg_drv_vbus(struct otg_fsm *fsm, int on)
+{
+ u32 tmp;
+
+ if (on) {
+ tmp = fsl_readl(&usb_dr_regs->portsc) & ~PORTSC_W1C_BITS;
+ fsl_writel(tmp | PORTSC_PORT_POWER, &usb_dr_regs->portsc);
+ } else {
+ tmp = fsl_readl(&usb_dr_regs->portsc) &
+ ~PORTSC_W1C_BITS & ~PORTSC_PORT_POWER;
+ fsl_writel(tmp, &usb_dr_regs->portsc);
+ }
+}
+
+/*
+ * Pull-up D+, signalling connect by periperal. Also used in
+ * data-line pulsing in SRP
+ */
+void fsl_otg_loc_conn(struct otg_fsm *fsm, int on)
+{
+ u32 tmp;
+
+ tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
+
+ if (on)
+ tmp |= OTGSC_CTRL_DATA_PULSING;
+ else
+ tmp &= ~OTGSC_CTRL_DATA_PULSING;
+
+ fsl_writel(tmp, &usb_dr_regs->otgsc);
+}
+
+/*
+ * Generate SOF by host. This is controlled through suspend/resume the
+ * port. In host mode, controller will automatically send SOF.
+ * Suspend will block the data on the port.
+ */
+void fsl_otg_loc_sof(struct otg_fsm *fsm, int on)
+{
+ u32 tmp;
+
+ tmp = fsl_readl(&fsl_otg_dev->dr_mem_map->portsc) & ~PORTSC_W1C_BITS;
+ if (on)
+ tmp |= PORTSC_PORT_FORCE_RESUME;
+ else
+ tmp |= PORTSC_PORT_SUSPEND;
+
+ fsl_writel(tmp, &fsl_otg_dev->dr_mem_map->portsc);
+
+}
+
+/* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */
+void fsl_otg_start_pulse(struct otg_fsm *fsm)
+{
+ u32 tmp;
+
+ srp_wait_done = 0;
+#ifdef HA_DATA_PULSE
+ tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
+ tmp |= OTGSC_HA_DATA_PULSE;
+ fsl_writel(tmp, &usb_dr_regs->otgsc);
+#else
+ fsl_otg_loc_conn(1);
+#endif
+
+ fsl_otg_add_timer(fsm, b_data_pulse_tmr);
+}
+
+void b_data_pulse_end(unsigned long foo)
+{
+#ifdef HA_DATA_PULSE
+#else
+ fsl_otg_loc_conn(0);
+#endif
+
+ /* Do VBUS pulse after data pulse */
+ fsl_otg_pulse_vbus();
+}
+
+void fsl_otg_pulse_vbus(void)
+{
+ srp_wait_done = 0;
+ fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 1);
+ /* start the timer to end vbus charge */
+ fsl_otg_add_timer(&fsl_otg_dev->fsm, b_vbus_pulse_tmr);
+}
+
+void b_vbus_pulse_end(unsigned long foo)
+{
+ fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 0);
+
+ /*
+ * As USB3300 using the same a_sess_vld and b_sess_vld voltage
+ * we need to discharge the bus for a while to distinguish
+ * residual voltage of vbus pulsing and A device pull up
+ */
+ fsl_otg_dischrg_vbus(1);
+ fsl_otg_add_timer(&fsl_otg_dev->fsm, b_srp_wait_tmr);
+}
+
+void b_srp_end(unsigned long foo)
+{
+ fsl_otg_dischrg_vbus(0);
+ srp_wait_done = 1;
+
+ if ((fsl_otg_dev->phy.otg->state == OTG_STATE_B_SRP_INIT) &&
+ fsl_otg_dev->fsm.b_sess_vld)
+ fsl_otg_dev->fsm.b_srp_done = 1;
+}
+
+/*
+ * Workaround for a_host suspending too fast. When a_bus_req=0,
+ * a_host will start by SRP. It needs to set b_hnp_enable before
+ * actually suspending to start HNP
+ */
+void a_wait_enum(unsigned long foo)
+{
+ VDBG("a_wait_enum timeout\n");
+ if (!fsl_otg_dev->phy.otg->host->b_hnp_enable)
+ fsl_otg_add_timer(&fsl_otg_dev->fsm, a_wait_enum_tmr);
+ else
+ otg_statemachine(&fsl_otg_dev->fsm);
+}
+
+/* The timeout callback function to set time out bit */
+void set_tmout(unsigned long indicator)
+{
+ *(int *)indicator = 1;
+}
+
+/* Initialize timers */
+int fsl_otg_init_timers(struct otg_fsm *fsm)
+{
+ /* FSM used timers */
+ a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
+ (unsigned long)&fsm->a_wait_vrise_tmout);
+ if (!a_wait_vrise_tmr)
+ return -ENOMEM;
+
+ a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON,
+ (unsigned long)&fsm->a_wait_bcon_tmout);
+ if (!a_wait_bcon_tmr)
+ return -ENOMEM;
+
+ a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
+ (unsigned long)&fsm->a_aidl_bdis_tmout);
+ if (!a_aidl_bdis_tmr)
+ return -ENOMEM;
+
+ b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST,
+ (unsigned long)&fsm->b_ase0_brst_tmout);
+ if (!b_ase0_brst_tmr)
+ return -ENOMEM;
+
+ b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
+ (unsigned long)&fsm->b_se0_srp);
+ if (!b_se0_srp_tmr)
+ return -ENOMEM;
+
+ b_srp_fail_tmr = otg_timer_initializer(&set_tmout, TB_SRP_FAIL,
+ (unsigned long)&fsm->b_srp_done);
+ if (!b_srp_fail_tmr)
+ return -ENOMEM;
+
+ a_wait_enum_tmr = otg_timer_initializer(&a_wait_enum, 10,
+ (unsigned long)&fsm);
+ if (!a_wait_enum_tmr)
+ return -ENOMEM;
+
+ /* device driver used timers */
+ b_srp_wait_tmr = otg_timer_initializer(&b_srp_end, TB_SRP_WAIT, 0);
+ if (!b_srp_wait_tmr)
+ return -ENOMEM;
+
+ b_data_pulse_tmr = otg_timer_initializer(&b_data_pulse_end,
+ TB_DATA_PLS, 0);
+ if (!b_data_pulse_tmr)
+ return -ENOMEM;
+
+ b_vbus_pulse_tmr = otg_timer_initializer(&b_vbus_pulse_end,
+ TB_VBUS_PLS, 0);
+ if (!b_vbus_pulse_tmr)
+ return -ENOMEM;
+
+ return 0;
+}
+
+/* Uninitialize timers */
+void fsl_otg_uninit_timers(void)
+{
+ /* FSM used timers */
+ kfree(a_wait_vrise_tmr);
+ kfree(a_wait_bcon_tmr);
+ kfree(a_aidl_bdis_tmr);
+ kfree(b_ase0_brst_tmr);
+ kfree(b_se0_srp_tmr);
+ kfree(b_srp_fail_tmr);
+ kfree(a_wait_enum_tmr);
+
+ /* device driver used timers */
+ kfree(b_srp_wait_tmr);
+ kfree(b_data_pulse_tmr);
+ kfree(b_vbus_pulse_tmr);
+}
+
+static struct fsl_otg_timer *fsl_otg_get_timer(enum otg_fsm_timer t)
+{
+ struct fsl_otg_timer *timer;
+
+ /* REVISIT: use array of pointers to timers instead */
+ switch (t) {
+ case A_WAIT_VRISE:
+ timer = a_wait_vrise_tmr;
+ break;
+ case A_WAIT_BCON:
+ timer = a_wait_vrise_tmr;
+ break;
+ case A_AIDL_BDIS:
+ timer = a_wait_vrise_tmr;
+ break;
+ case B_ASE0_BRST:
+ timer = a_wait_vrise_tmr;
+ break;
+ case B_SE0_SRP:
+ timer = a_wait_vrise_tmr;
+ break;
+ case B_SRP_FAIL:
+ timer = a_wait_vrise_tmr;
+ break;
+ case A_WAIT_ENUM:
+ timer = a_wait_vrise_tmr;
+ break;
+ default:
+ timer = NULL;
+ }
+
+ return timer;
+}
+
+/* Add timer to timer list */
+void fsl_otg_add_timer(struct otg_fsm *fsm, void *gtimer)
+{
+ struct fsl_otg_timer *timer = gtimer;
+ struct fsl_otg_timer *tmp_timer;
+
+ /*
+ * Check if the timer is already in the active list,
+ * if so update timer count
+ */
+ list_for_each_entry(tmp_timer, &active_timers, list)
+ if (tmp_timer == timer) {
+ timer->count = timer->expires;
+ return;
+ }
+ timer->count = timer->expires;
+ list_add_tail(&timer->list, &active_timers);
+}
+
+static void fsl_otg_fsm_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
+{
+ struct fsl_otg_timer *timer;
+
+ timer = fsl_otg_get_timer(t);
+ if (!timer)
+ return;
+
+ fsl_otg_add_timer(fsm, timer);
+}
+
+/* Remove timer from the timer list; clear timeout status */
+void fsl_otg_del_timer(struct otg_fsm *fsm, void *gtimer)
+{
+ struct fsl_otg_timer *timer = gtimer;
+ struct fsl_otg_timer *tmp_timer, *del_tmp;
+
+ list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
+ if (tmp_timer == timer)
+ list_del(&timer->list);
+}
+
+static void fsl_otg_fsm_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
+{
+ struct fsl_otg_timer *timer;
+
+ timer = fsl_otg_get_timer(t);
+ if (!timer)
+ return;
+
+ fsl_otg_del_timer(fsm, timer);
+}
+
+/* Reset controller, not reset the bus */
+void otg_reset_controller(void)
+{
+ u32 command;
+
+ command = fsl_readl(&usb_dr_regs->usbcmd);
+ command |= (1 << 1);
+ fsl_writel(command, &usb_dr_regs->usbcmd);
+ while (fsl_readl(&usb_dr_regs->usbcmd) & (1 << 1))
+ ;
+}
+
+/* Call suspend/resume routines in host driver */
+int fsl_otg_start_host(struct otg_fsm *fsm, int on)
+{
+ struct usb_otg *otg = fsm->otg;
+ struct device *dev;
+ struct fsl_otg *otg_dev =
+ container_of(otg->usb_phy, struct fsl_otg, phy);
+ u32 retval = 0;
+
+ if (!otg->host)
+ return -ENODEV;
+ dev = otg->host->controller;
+
+ /*
+ * Update a_vbus_vld state as a_vbus_vld int is disabled
+ * in device mode
+ */
+ fsm->a_vbus_vld =
+ !!(fsl_readl(&usb_dr_regs->otgsc) & OTGSC_STS_A_VBUS_VALID);
+ if (on) {
+ /* start fsl usb host controller */
+ if (otg_dev->host_working)
+ goto end;
+ else {
+ otg_reset_controller();
+ VDBG("host on......\n");
+ if (dev->driver->pm && dev->driver->pm->resume) {
+ retval = dev->driver->pm->resume(dev);
+ if (fsm->id) {
+ /* default-b */
+ fsl_otg_drv_vbus(fsm, 1);
+ /*
+ * Workaround: b_host can't driver
+ * vbus, but PP in PORTSC needs to
+ * be 1 for host to work.
+ * So we set drv_vbus bit in
+ * transceiver to 0 thru ULPI.
+ */
+ write_ulpi(0x0c, 0x20);
+ }
+ }
+
+ otg_dev->host_working = 1;
+ }
+ } else {
+ /* stop fsl usb host controller */
+ if (!otg_dev->host_working)
+ goto end;
+ else {
+ VDBG("host off......\n");
+ if (dev && dev->driver) {
+ if (dev->driver->pm && dev->driver->pm->suspend)
+ retval = dev->driver->pm->suspend(dev);
+ if (fsm->id)
+ /* default-b */
+ fsl_otg_drv_vbus(fsm, 0);
+ }
+ otg_dev->host_working = 0;
+ }
+ }
+end:
+ return retval;
+}
+
+/*
+ * Call suspend and resume function in udc driver
+ * to stop and start udc driver.
+ */
+int fsl_otg_start_gadget(struct otg_fsm *fsm, int on)
+{
+ struct usb_otg *otg = fsm->otg;
+ struct device *dev;
+
+ if (!otg->gadget || !otg->gadget->dev.parent)
+ return -ENODEV;
+
+ VDBG("gadget %s\n", on ? "on" : "off");
+ dev = otg->gadget->dev.parent;
+
+ if (on) {
+ if (dev->driver->resume)
+ dev->driver->resume(dev);
+ } else {
+ if (dev->driver->suspend)
+ dev->driver->suspend(dev, otg_suspend_state);
+ }
+
+ return 0;
+}
+
+/*
+ * Called by initialization code of host driver. Register host controller
+ * to the OTG. Suspend host for OTG role detection.
+ */
+static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ struct fsl_otg *otg_dev;
+
+ if (!otg)
+ return -ENODEV;
+
+ otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
+ if (otg_dev != fsl_otg_dev)
+ return -ENODEV;
+
+ otg->host = host;
+
+ otg_dev->fsm.a_bus_drop = 0;
+ otg_dev->fsm.a_bus_req = 1;
+
+ if (host) {
+ VDBG("host off......\n");
+
+ otg->host->otg_port = fsl_otg_initdata.otg_port;
+ otg->host->is_b_host = otg_dev->fsm.id;
+ /*
+ * must leave time for hub_wq to finish its thing
+ * before yanking the host driver out from under it,
+ * so suspend the host after a short delay.
+ */
+ otg_dev->host_working = 1;
+ schedule_delayed_work(&otg_dev->otg_event, 100);
+ return 0;
+ } else {
+ /* host driver going away */
+ if (!(fsl_readl(&otg_dev->dr_mem_map->otgsc) &
+ OTGSC_STS_USB_ID)) {
+ /* Mini-A cable connected */
+ struct otg_fsm *fsm = &otg_dev->fsm;
+
+ otg->state = OTG_STATE_UNDEFINED;
+ fsm->protocol = PROTO_UNDEF;
+ }
+ }
+
+ otg_dev->host_working = 0;
+
+ otg_statemachine(&otg_dev->fsm);
+
+ return 0;
+}
+
+/* Called by initialization code of udc. Register udc to OTG. */
+static int fsl_otg_set_peripheral(struct usb_otg *otg,
+ struct usb_gadget *gadget)
+{
+ struct fsl_otg *otg_dev;
+
+ if (!otg)
+ return -ENODEV;
+
+ otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
+ VDBG("otg_dev 0x%x\n", (int)otg_dev);
+ VDBG("fsl_otg_dev 0x%x\n", (int)fsl_otg_dev);
+ if (otg_dev != fsl_otg_dev)
+ return -ENODEV;
+
+ if (!gadget) {
+ if (!otg->default_a)
+ otg->gadget->ops->vbus_draw(otg->gadget, 0);
+ usb_gadget_vbus_disconnect(otg->gadget);
+ otg->gadget = 0;
+ otg_dev->fsm.b_bus_req = 0;
+ otg_statemachine(&otg_dev->fsm);
+ return 0;
+ }
+
+ otg->gadget = gadget;
+ otg->gadget->is_a_peripheral = !otg_dev->fsm.id;
+
+ otg_dev->fsm.b_bus_req = 1;
+
+ /* start the gadget right away if the ID pin says Mini-B */
+ pr_debug("ID pin=%d\n", otg_dev->fsm.id);
+ if (otg_dev->fsm.id == 1) {
+ fsl_otg_start_host(&otg_dev->fsm, 0);
+ otg_drv_vbus(&otg_dev->fsm, 0);
+ fsl_otg_start_gadget(&otg_dev->fsm, 1);
+ }
+
+ return 0;
+}
+
+/* Set OTG port power, only for B-device */
+static int fsl_otg_set_power(struct usb_phy *phy, unsigned mA)
+{
+ if (!fsl_otg_dev)
+ return -ENODEV;
+ if (phy->otg->state == OTG_STATE_B_PERIPHERAL)
+ pr_info("FSL OTG: Draw %d mA\n", mA);
+
+ return 0;
+}
+
+/*
+ * Delayed pin detect interrupt processing.
+ *
+ * When the Mini-A cable is disconnected from the board,
+ * the pin-detect interrupt happens before the disconnect
+ * interrupts for the connected device(s). In order to
+ * process the disconnect interrupt(s) prior to switching
+ * roles, the pin-detect interrupts are delayed, and handled
+ * by this routine.
+ */
+static void fsl_otg_event(struct work_struct *work)
+{
+ struct fsl_otg *og = container_of(work, struct fsl_otg, otg_event.work);
+ struct otg_fsm *fsm = &og->fsm;
+
+ if (fsm->id) { /* switch to gadget */
+ fsl_otg_start_host(fsm, 0);
+ otg_drv_vbus(fsm, 0);
+ fsl_otg_start_gadget(fsm, 1);
+ }
+}
+
+/* B-device start SRP */
+static int fsl_otg_start_srp(struct usb_otg *otg)
+{
+ struct fsl_otg *otg_dev;
+
+ if (!otg || otg->state != OTG_STATE_B_IDLE)
+ return -ENODEV;
+
+ otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
+ if (otg_dev != fsl_otg_dev)
+ return -ENODEV;
+
+ otg_dev->fsm.b_bus_req = 1;
+ otg_statemachine(&otg_dev->fsm);
+
+ return 0;
+}
+
+/* A_host suspend will call this function to start hnp */
+static int fsl_otg_start_hnp(struct usb_otg *otg)
+{
+ struct fsl_otg *otg_dev;
+
+ if (!otg)
+ return -ENODEV;
+
+ otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
+ if (otg_dev != fsl_otg_dev)
+ return -ENODEV;
+
+ pr_debug("start_hnp...\n");
+
+ /* clear a_bus_req to enter a_suspend state */
+ otg_dev->fsm.a_bus_req = 0;
+ otg_statemachine(&otg_dev->fsm);
+
+ return 0;
+}
+
+/*
+ * Interrupt handler. OTG/host/peripheral share the same int line.
+ * OTG driver clears OTGSC interrupts and leaves USB interrupts
+ * intact. It needs to have knowledge of some USB interrupts
+ * such as port change.
+ */
+irqreturn_t fsl_otg_isr(int irq, void *dev_id)
+{
+ struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm;
+ struct usb_otg *otg = ((struct fsl_otg *)dev_id)->phy.otg;
+ u32 otg_int_src, otg_sc;
+
+ otg_sc = fsl_readl(&usb_dr_regs->otgsc);
+ otg_int_src = otg_sc & OTGSC_INTSTS_MASK & (otg_sc >> 8);
+
+ /* Only clear otg interrupts */
+ fsl_writel(otg_sc, &usb_dr_regs->otgsc);
+
+ /*FIXME: ID change not generate when init to 0 */
+ fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
+ otg->default_a = (fsm->id == 0);
+
+ /* process OTG interrupts */
+ if (otg_int_src) {
+ if (otg_int_src & OTGSC_INTSTS_USB_ID) {
+ fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
+ otg->default_a = (fsm->id == 0);
+ /* clear conn information */
+ if (fsm->id)
+ fsm->b_conn = 0;
+ else
+ fsm->a_conn = 0;
+
+ if (otg->host)
+ otg->host->is_b_host = fsm->id;
+ if (otg->gadget)
+ otg->gadget->is_a_peripheral = !fsm->id;
+ VDBG("ID int (ID is %d)\n", fsm->id);
+
+ if (fsm->id) { /* switch to gadget */
+ schedule_delayed_work(
+ &((struct fsl_otg *)dev_id)->otg_event,
+ 100);
+ } else { /* switch to host */
+ cancel_delayed_work(&
+ ((struct fsl_otg *)dev_id)->
+ otg_event);
+ fsl_otg_start_gadget(fsm, 0);
+ otg_drv_vbus(fsm, 1);
+ fsl_otg_start_host(fsm, 1);
+ }
+ return IRQ_HANDLED;
+ }
+ }
+ return IRQ_NONE;
+}
+
+static struct otg_fsm_ops fsl_otg_ops = {
+ .chrg_vbus = fsl_otg_chrg_vbus,
+ .drv_vbus = fsl_otg_drv_vbus,
+ .loc_conn = fsl_otg_loc_conn,
+ .loc_sof = fsl_otg_loc_sof,
+ .start_pulse = fsl_otg_start_pulse,
+
+ .add_timer = fsl_otg_fsm_add_timer,
+ .del_timer = fsl_otg_fsm_del_timer,
+
+ .start_host = fsl_otg_start_host,
+ .start_gadget = fsl_otg_start_gadget,
+};
+
+/* Initialize the global variable fsl_otg_dev and request IRQ for OTG */
+static int fsl_otg_conf(struct platform_device *pdev)
+{
+ struct fsl_otg *fsl_otg_tc;
+ int status;
+
+ if (fsl_otg_dev)
+ return 0;
+
+ /* allocate space to fsl otg device */
+ fsl_otg_tc = kzalloc(sizeof(struct fsl_otg), GFP_KERNEL);
+ if (!fsl_otg_tc)
+ return -ENOMEM;
+
+ fsl_otg_tc->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
+ if (!fsl_otg_tc->phy.otg) {
+ kfree(fsl_otg_tc);
+ return -ENOMEM;
+ }
+
+ INIT_DELAYED_WORK(&fsl_otg_tc->otg_event, fsl_otg_event);
+
+ INIT_LIST_HEAD(&active_timers);
+ status = fsl_otg_init_timers(&fsl_otg_tc->fsm);
+ if (status) {
+ pr_info("Couldn't init OTG timers\n");
+ goto err;
+ }
+ mutex_init(&fsl_otg_tc->fsm.lock);
+
+ /* Set OTG state machine operations */
+ fsl_otg_tc->fsm.ops = &fsl_otg_ops;
+
+ /* initialize the otg structure */
+ fsl_otg_tc->phy.label = DRIVER_DESC;
+ fsl_otg_tc->phy.dev = &pdev->dev;
+ fsl_otg_tc->phy.set_power = fsl_otg_set_power;
+
+ fsl_otg_tc->phy.otg->usb_phy = &fsl_otg_tc->phy;
+ fsl_otg_tc->phy.otg->set_host = fsl_otg_set_host;
+ fsl_otg_tc->phy.otg->set_peripheral = fsl_otg_set_peripheral;
+ fsl_otg_tc->phy.otg->start_hnp = fsl_otg_start_hnp;
+ fsl_otg_tc->phy.otg->start_srp = fsl_otg_start_srp;
+
+ fsl_otg_dev = fsl_otg_tc;
+
+ /* Store the otg transceiver */
+ status = usb_add_phy(&fsl_otg_tc->phy, USB_PHY_TYPE_USB2);
+ if (status) {
+ pr_warn(FSL_OTG_NAME ": unable to register OTG transceiver.\n");
+ goto err;
+ }
+
+ return 0;
+err:
+ fsl_otg_uninit_timers();
+ kfree(fsl_otg_tc->phy.otg);
+ kfree(fsl_otg_tc);
+ return status;
+}
+
+/* OTG Initialization */
+int usb_otg_start(struct platform_device *pdev)
+{
+ struct fsl_otg *p_otg;
+ struct usb_phy *otg_trans = usb_get_phy(USB_PHY_TYPE_USB2);
+ struct otg_fsm *fsm;
+ int status;
+ struct resource *res;
+ u32 temp;
+ struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
+
+ p_otg = container_of(otg_trans, struct fsl_otg, phy);
+ fsm = &p_otg->fsm;
+
+ /* Initialize the state machine structure with default values */
+ SET_OTG_STATE(otg_trans, OTG_STATE_UNDEFINED);
+ fsm->otg = p_otg->phy.otg;
+
+ /* We don't require predefined MEM/IRQ resource index */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENXIO;
+
+ /* We don't request_mem_region here to enable resource sharing
+ * with host/device */
+
+ usb_dr_regs = ioremap(res->start, sizeof(struct usb_dr_mmap));
+ p_otg->dr_mem_map = (struct usb_dr_mmap *)usb_dr_regs;
+ pdata->regs = (void *)usb_dr_regs;
+
+ if (pdata->init && pdata->init(pdev) != 0)
+ return -EINVAL;
+
+ if (pdata->big_endian_mmio) {
+ _fsl_readl = _fsl_readl_be;
+ _fsl_writel = _fsl_writel_be;
+ } else {
+ _fsl_readl = _fsl_readl_le;
+ _fsl_writel = _fsl_writel_le;
+ }
+
+ /* request irq */
+ p_otg->irq = platform_get_irq(pdev, 0);
+ status = request_irq(p_otg->irq, fsl_otg_isr,
+ IRQF_SHARED, driver_name, p_otg);
+ if (status) {
+ dev_dbg(p_otg->phy.dev, "can't get IRQ %d, error %d\n",
+ p_otg->irq, status);
+ iounmap(p_otg->dr_mem_map);
+ kfree(p_otg->phy.otg);
+ kfree(p_otg);
+ return status;
+ }
+
+ /* stop the controller */
+ temp = fsl_readl(&p_otg->dr_mem_map->usbcmd);
+ temp &= ~USB_CMD_RUN_STOP;
+ fsl_writel(temp, &p_otg->dr_mem_map->usbcmd);
+
+ /* reset the controller */
+ temp = fsl_readl(&p_otg->dr_mem_map->usbcmd);
+ temp |= USB_CMD_CTRL_RESET;
+ fsl_writel(temp, &p_otg->dr_mem_map->usbcmd);
+
+ /* wait reset completed */
+ while (fsl_readl(&p_otg->dr_mem_map->usbcmd) & USB_CMD_CTRL_RESET)
+ ;
+
+ /* configure the VBUSHS as IDLE(both host and device) */
+ temp = USB_MODE_STREAM_DISABLE | (pdata->es ? USB_MODE_ES : 0);
+ fsl_writel(temp, &p_otg->dr_mem_map->usbmode);
+
+ /* configure PHY interface */
+ temp = fsl_readl(&p_otg->dr_mem_map->portsc);
+ temp &= ~(PORTSC_PHY_TYPE_SEL | PORTSC_PTW);
+ switch (pdata->phy_mode) {
+ case FSL_USB2_PHY_ULPI:
+ temp |= PORTSC_PTS_ULPI;
+ break;
+ case FSL_USB2_PHY_UTMI_WIDE:
+ temp |= PORTSC_PTW_16BIT;
+ /* fall through */
+ case FSL_USB2_PHY_UTMI:
+ temp |= PORTSC_PTS_UTMI;
+ /* fall through */
+ default:
+ break;
+ }
+ fsl_writel(temp, &p_otg->dr_mem_map->portsc);
+
+ if (pdata->have_sysif_regs) {
+ /* configure control enable IO output, big endian register */
+ temp = __raw_readl(&p_otg->dr_mem_map->control);
+ temp |= USB_CTRL_IOENB;
+ __raw_writel(temp, &p_otg->dr_mem_map->control);
+ }
+
+ /* disable all interrupt and clear all OTGSC status */
+ temp = fsl_readl(&p_otg->dr_mem_map->otgsc);
+ temp &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK;
+ temp |= OTGSC_INTERRUPT_STATUS_BITS_MASK | OTGSC_CTRL_VBUS_DISCHARGE;
+ fsl_writel(temp, &p_otg->dr_mem_map->otgsc);
+
+ /*
+ * The identification (id) input is FALSE when a Mini-A plug is inserted
+ * in the devices Mini-AB receptacle. Otherwise, this input is TRUE.
+ * Also: record initial state of ID pin
+ */
+ if (fsl_readl(&p_otg->dr_mem_map->otgsc) & OTGSC_STS_USB_ID) {
+ p_otg->phy.otg->state = OTG_STATE_UNDEFINED;
+ p_otg->fsm.id = 1;
+ } else {
+ p_otg->phy.otg->state = OTG_STATE_A_IDLE;
+ p_otg->fsm.id = 0;
+ }
+
+ pr_debug("initial ID pin=%d\n", p_otg->fsm.id);
+
+ /* enable OTG ID pin interrupt */
+ temp = fsl_readl(&p_otg->dr_mem_map->otgsc);
+ temp |= OTGSC_INTR_USB_ID_EN;
+ temp &= ~(OTGSC_CTRL_VBUS_DISCHARGE | OTGSC_INTR_1MS_TIMER_EN);
+ fsl_writel(temp, &p_otg->dr_mem_map->otgsc);
+
+ return 0;
+}
+
+/*
+ * state file in sysfs
+ */
+static int show_fsl_usb2_otg_state(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct otg_fsm *fsm = &fsl_otg_dev->fsm;
+ char *next = buf;
+ unsigned size = PAGE_SIZE;
+ int t;
+
+ mutex_lock(&fsm->lock);
+
+ /* basic driver infomation */
+ t = scnprintf(next, size,
+ DRIVER_DESC "\n" "fsl_usb2_otg version: %s\n\n",
+ DRIVER_VERSION);
+ size -= t;
+ next += t;
+
+ /* Registers */
+ t = scnprintf(next, size,
+ "OTGSC: 0x%08x\n"
+ "PORTSC: 0x%08x\n"
+ "USBMODE: 0x%08x\n"
+ "USBCMD: 0x%08x\n"
+ "USBSTS: 0x%08x\n"
+ "USBINTR: 0x%08x\n",
+ fsl_readl(&usb_dr_regs->otgsc),
+ fsl_readl(&usb_dr_regs->portsc),
+ fsl_readl(&usb_dr_regs->usbmode),
+ fsl_readl(&usb_dr_regs->usbcmd),
+ fsl_readl(&usb_dr_regs->usbsts),
+ fsl_readl(&usb_dr_regs->usbintr));
+ size -= t;
+ next += t;
+
+ /* State */
+ t = scnprintf(next, size,
+ "OTG state: %s\n\n",
+ usb_otg_state_string(fsl_otg_dev->phy.otg->state));
+ size -= t;
+ next += t;
+
+ /* State Machine Variables */
+ t = scnprintf(next, size,
+ "a_bus_req: %d\n"
+ "b_bus_req: %d\n"
+ "a_bus_resume: %d\n"
+ "a_bus_suspend: %d\n"
+ "a_conn: %d\n"
+ "a_sess_vld: %d\n"
+ "a_srp_det: %d\n"
+ "a_vbus_vld: %d\n"
+ "b_bus_resume: %d\n"
+ "b_bus_suspend: %d\n"
+ "b_conn: %d\n"
+ "b_se0_srp: %d\n"
+ "b_ssend_srp: %d\n"
+ "b_sess_vld: %d\n"
+ "id: %d\n",
+ fsm->a_bus_req,
+ fsm->b_bus_req,
+ fsm->a_bus_resume,
+ fsm->a_bus_suspend,
+ fsm->a_conn,
+ fsm->a_sess_vld,
+ fsm->a_srp_det,
+ fsm->a_vbus_vld,
+ fsm->b_bus_resume,
+ fsm->b_bus_suspend,
+ fsm->b_conn,
+ fsm->b_se0_srp,
+ fsm->b_ssend_srp,
+ fsm->b_sess_vld,
+ fsm->id);
+ size -= t;
+ next += t;
+
+ mutex_unlock(&fsm->lock);
+
+ return PAGE_SIZE - size;
+}
+
+static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL);
+
+
+/* Char driver interface to control some OTG input */
+
+/*
+ * Handle some ioctl command, such as get otg
+ * status and set host suspend
+ */
+static long fsl_otg_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ u32 retval = 0;
+
+ switch (cmd) {
+ case GET_OTG_STATUS:
+ retval = fsl_otg_dev->host_working;
+ break;
+
+ case SET_A_SUSPEND_REQ:
+ fsl_otg_dev->fsm.a_suspend_req_inf = arg;
+ break;
+
+ case SET_A_BUS_DROP:
+ fsl_otg_dev->fsm.a_bus_drop = arg;
+ break;
+
+ case SET_A_BUS_REQ:
+ fsl_otg_dev->fsm.a_bus_req = arg;
+ break;
+
+ case SET_B_BUS_REQ:
+ fsl_otg_dev->fsm.b_bus_req = arg;
+ break;
+
+ default:
+ break;
+ }
+
+ otg_statemachine(&fsl_otg_dev->fsm);
+
+ return retval;
+}
+
+static int fsl_otg_open(struct inode *inode, struct file *file)
+{
+ return 0;
+}
+
+static int fsl_otg_release(struct inode *inode, struct file *file)
+{
+ return 0;
+}
+
+static const struct file_operations otg_fops = {
+ .owner = THIS_MODULE,
+ .llseek = NULL,
+ .read = NULL,
+ .write = NULL,
+ .unlocked_ioctl = fsl_otg_ioctl,
+ .open = fsl_otg_open,
+ .release = fsl_otg_release,
+};
+
+static int fsl_otg_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ if (!dev_get_platdata(&pdev->dev))
+ return -ENODEV;
+
+ /* configure the OTG */
+ ret = fsl_otg_conf(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Couldn't configure OTG module\n");
+ return ret;
+ }
+
+ /* start OTG */
+ ret = usb_otg_start(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't init FSL OTG device\n");
+ return ret;
+ }
+
+ ret = register_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME, &otg_fops);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to register FSL OTG device\n");
+ return ret;
+ }
+
+ ret = device_create_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state);
+ if (ret)
+ dev_warn(&pdev->dev, "Can't register sysfs attribute\n");
+
+ return ret;
+}
+
+static int fsl_otg_remove(struct platform_device *pdev)
+{
+ struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
+
+ usb_remove_phy(&fsl_otg_dev->phy);
+ free_irq(fsl_otg_dev->irq, fsl_otg_dev);
+
+ iounmap((void *)usb_dr_regs);
+
+ fsl_otg_uninit_timers();
+ kfree(fsl_otg_dev->phy.otg);
+ kfree(fsl_otg_dev);
+
+ device_remove_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state);
+
+ unregister_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME);
+
+ if (pdata->exit)
+ pdata->exit(pdev);
+
+ return 0;
+}
+
+struct platform_driver fsl_otg_driver = {
+ .probe = fsl_otg_probe,
+ .remove = fsl_otg_remove,
+ .driver = {
+ .name = driver_name,
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(fsl_otg_driver);
+
+MODULE_DESCRIPTION(DRIVER_INFO);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/usb/phy/phy-fsl-usb.h b/kernel/drivers/usb/phy/phy-fsl-usb.h
new file mode 100644
index 000000000..23149954a
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-fsl-usb.h
@@ -0,0 +1,406 @@
+/* Copyright (C) 2007,2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/usb/otg-fsm.h>
+#include <linux/usb/otg.h>
+#include <linux/ioctl.h>
+
+/* USB Command Register Bit Masks */
+#define USB_CMD_RUN_STOP (0x1<<0)
+#define USB_CMD_CTRL_RESET (0x1<<1)
+#define USB_CMD_PERIODIC_SCHEDULE_EN (0x1<<4)
+#define USB_CMD_ASYNC_SCHEDULE_EN (0x1<<5)
+#define USB_CMD_INT_AA_DOORBELL (0x1<<6)
+#define USB_CMD_ASP (0x3<<8)
+#define USB_CMD_ASYNC_SCH_PARK_EN (0x1<<11)
+#define USB_CMD_SUTW (0x1<<13)
+#define USB_CMD_ATDTW (0x1<<14)
+#define USB_CMD_ITC (0xFF<<16)
+
+/* bit 15,3,2 are frame list size */
+#define USB_CMD_FRAME_SIZE_1024 (0x0<<15 | 0x0<<2)
+#define USB_CMD_FRAME_SIZE_512 (0x0<<15 | 0x1<<2)
+#define USB_CMD_FRAME_SIZE_256 (0x0<<15 | 0x2<<2)
+#define USB_CMD_FRAME_SIZE_128 (0x0<<15 | 0x3<<2)
+#define USB_CMD_FRAME_SIZE_64 (0x1<<15 | 0x0<<2)
+#define USB_CMD_FRAME_SIZE_32 (0x1<<15 | 0x1<<2)
+#define USB_CMD_FRAME_SIZE_16 (0x1<<15 | 0x2<<2)
+#define USB_CMD_FRAME_SIZE_8 (0x1<<15 | 0x3<<2)
+
+/* bit 9-8 are async schedule park mode count */
+#define USB_CMD_ASP_00 (0x0<<8)
+#define USB_CMD_ASP_01 (0x1<<8)
+#define USB_CMD_ASP_10 (0x2<<8)
+#define USB_CMD_ASP_11 (0x3<<8)
+#define USB_CMD_ASP_BIT_POS (8)
+
+/* bit 23-16 are interrupt threshold control */
+#define USB_CMD_ITC_NO_THRESHOLD (0x00<<16)
+#define USB_CMD_ITC_1_MICRO_FRM (0x01<<16)
+#define USB_CMD_ITC_2_MICRO_FRM (0x02<<16)
+#define USB_CMD_ITC_4_MICRO_FRM (0x04<<16)
+#define USB_CMD_ITC_8_MICRO_FRM (0x08<<16)
+#define USB_CMD_ITC_16_MICRO_FRM (0x10<<16)
+#define USB_CMD_ITC_32_MICRO_FRM (0x20<<16)
+#define USB_CMD_ITC_64_MICRO_FRM (0x40<<16)
+#define USB_CMD_ITC_BIT_POS (16)
+
+/* USB Status Register Bit Masks */
+#define USB_STS_INT (0x1<<0)
+#define USB_STS_ERR (0x1<<1)
+#define USB_STS_PORT_CHANGE (0x1<<2)
+#define USB_STS_FRM_LST_ROLL (0x1<<3)
+#define USB_STS_SYS_ERR (0x1<<4)
+#define USB_STS_IAA (0x1<<5)
+#define USB_STS_RESET_RECEIVED (0x1<<6)
+#define USB_STS_SOF (0x1<<7)
+#define USB_STS_DCSUSPEND (0x1<<8)
+#define USB_STS_HC_HALTED (0x1<<12)
+#define USB_STS_RCL (0x1<<13)
+#define USB_STS_PERIODIC_SCHEDULE (0x1<<14)
+#define USB_STS_ASYNC_SCHEDULE (0x1<<15)
+
+/* USB Interrupt Enable Register Bit Masks */
+#define USB_INTR_INT_EN (0x1<<0)
+#define USB_INTR_ERR_INT_EN (0x1<<1)
+#define USB_INTR_PC_DETECT_EN (0x1<<2)
+#define USB_INTR_FRM_LST_ROLL_EN (0x1<<3)
+#define USB_INTR_SYS_ERR_EN (0x1<<4)
+#define USB_INTR_ASYN_ADV_EN (0x1<<5)
+#define USB_INTR_RESET_EN (0x1<<6)
+#define USB_INTR_SOF_EN (0x1<<7)
+#define USB_INTR_DEVICE_SUSPEND (0x1<<8)
+
+/* Device Address bit masks */
+#define USB_DEVICE_ADDRESS_MASK (0x7F<<25)
+#define USB_DEVICE_ADDRESS_BIT_POS (25)
+/* PORTSC Register Bit Masks,Only one PORT in OTG mode*/
+#define PORTSC_CURRENT_CONNECT_STATUS (0x1<<0)
+#define PORTSC_CONNECT_STATUS_CHANGE (0x1<<1)
+#define PORTSC_PORT_ENABLE (0x1<<2)
+#define PORTSC_PORT_EN_DIS_CHANGE (0x1<<3)
+#define PORTSC_OVER_CURRENT_ACT (0x1<<4)
+#define PORTSC_OVER_CUURENT_CHG (0x1<<5)
+#define PORTSC_PORT_FORCE_RESUME (0x1<<6)
+#define PORTSC_PORT_SUSPEND (0x1<<7)
+#define PORTSC_PORT_RESET (0x1<<8)
+#define PORTSC_LINE_STATUS_BITS (0x3<<10)
+#define PORTSC_PORT_POWER (0x1<<12)
+#define PORTSC_PORT_INDICTOR_CTRL (0x3<<14)
+#define PORTSC_PORT_TEST_CTRL (0xF<<16)
+#define PORTSC_WAKE_ON_CONNECT_EN (0x1<<20)
+#define PORTSC_WAKE_ON_CONNECT_DIS (0x1<<21)
+#define PORTSC_WAKE_ON_OVER_CURRENT (0x1<<22)
+#define PORTSC_PHY_LOW_POWER_SPD (0x1<<23)
+#define PORTSC_PORT_FORCE_FULL_SPEED (0x1<<24)
+#define PORTSC_PORT_SPEED_MASK (0x3<<26)
+#define PORTSC_TRANSCEIVER_WIDTH (0x1<<28)
+#define PORTSC_PHY_TYPE_SEL (0x3<<30)
+/* bit 11-10 are line status */
+#define PORTSC_LINE_STATUS_SE0 (0x0<<10)
+#define PORTSC_LINE_STATUS_JSTATE (0x1<<10)
+#define PORTSC_LINE_STATUS_KSTATE (0x2<<10)
+#define PORTSC_LINE_STATUS_UNDEF (0x3<<10)
+#define PORTSC_LINE_STATUS_BIT_POS (10)
+
+/* bit 15-14 are port indicator control */
+#define PORTSC_PIC_OFF (0x0<<14)
+#define PORTSC_PIC_AMBER (0x1<<14)
+#define PORTSC_PIC_GREEN (0x2<<14)
+#define PORTSC_PIC_UNDEF (0x3<<14)
+#define PORTSC_PIC_BIT_POS (14)
+
+/* bit 19-16 are port test control */
+#define PORTSC_PTC_DISABLE (0x0<<16)
+#define PORTSC_PTC_JSTATE (0x1<<16)
+#define PORTSC_PTC_KSTATE (0x2<<16)
+#define PORTSC_PTC_SEQNAK (0x3<<16)
+#define PORTSC_PTC_PACKET (0x4<<16)
+#define PORTSC_PTC_FORCE_EN (0x5<<16)
+#define PORTSC_PTC_BIT_POS (16)
+
+/* bit 27-26 are port speed */
+#define PORTSC_PORT_SPEED_FULL (0x0<<26)
+#define PORTSC_PORT_SPEED_LOW (0x1<<26)
+#define PORTSC_PORT_SPEED_HIGH (0x2<<26)
+#define PORTSC_PORT_SPEED_UNDEF (0x3<<26)
+#define PORTSC_SPEED_BIT_POS (26)
+
+/* bit 28 is parallel transceiver width for UTMI interface */
+#define PORTSC_PTW (0x1<<28)
+#define PORTSC_PTW_8BIT (0x0<<28)
+#define PORTSC_PTW_16BIT (0x1<<28)
+
+/* bit 31-30 are port transceiver select */
+#define PORTSC_PTS_UTMI (0x0<<30)
+#define PORTSC_PTS_ULPI (0x2<<30)
+#define PORTSC_PTS_FSLS_SERIAL (0x3<<30)
+#define PORTSC_PTS_BIT_POS (30)
+
+#define PORTSC_W1C_BITS \
+ (PORTSC_CONNECT_STATUS_CHANGE | \
+ PORTSC_PORT_EN_DIS_CHANGE | \
+ PORTSC_OVER_CUURENT_CHG)
+
+/* OTG Status Control Register Bit Masks */
+#define OTGSC_CTRL_VBUS_DISCHARGE (0x1<<0)
+#define OTGSC_CTRL_VBUS_CHARGE (0x1<<1)
+#define OTGSC_CTRL_OTG_TERMINATION (0x1<<3)
+#define OTGSC_CTRL_DATA_PULSING (0x1<<4)
+#define OTGSC_CTRL_ID_PULL_EN (0x1<<5)
+#define OTGSC_HA_DATA_PULSE (0x1<<6)
+#define OTGSC_HA_BA (0x1<<7)
+#define OTGSC_STS_USB_ID (0x1<<8)
+#define OTGSC_STS_A_VBUS_VALID (0x1<<9)
+#define OTGSC_STS_A_SESSION_VALID (0x1<<10)
+#define OTGSC_STS_B_SESSION_VALID (0x1<<11)
+#define OTGSC_STS_B_SESSION_END (0x1<<12)
+#define OTGSC_STS_1MS_TOGGLE (0x1<<13)
+#define OTGSC_STS_DATA_PULSING (0x1<<14)
+#define OTGSC_INTSTS_USB_ID (0x1<<16)
+#define OTGSC_INTSTS_A_VBUS_VALID (0x1<<17)
+#define OTGSC_INTSTS_A_SESSION_VALID (0x1<<18)
+#define OTGSC_INTSTS_B_SESSION_VALID (0x1<<19)
+#define OTGSC_INTSTS_B_SESSION_END (0x1<<20)
+#define OTGSC_INTSTS_1MS (0x1<<21)
+#define OTGSC_INTSTS_DATA_PULSING (0x1<<22)
+#define OTGSC_INTR_USB_ID_EN (0x1<<24)
+#define OTGSC_INTR_A_VBUS_VALID_EN (0x1<<25)
+#define OTGSC_INTR_A_SESSION_VALID_EN (0x1<<26)
+#define OTGSC_INTR_B_SESSION_VALID_EN (0x1<<27)
+#define OTGSC_INTR_B_SESSION_END_EN (0x1<<28)
+#define OTGSC_INTR_1MS_TIMER_EN (0x1<<29)
+#define OTGSC_INTR_DATA_PULSING_EN (0x1<<30)
+#define OTGSC_INTSTS_MASK (0x00ff0000)
+
+/* USB MODE Register Bit Masks */
+#define USB_MODE_CTRL_MODE_IDLE (0x0<<0)
+#define USB_MODE_CTRL_MODE_DEVICE (0x2<<0)
+#define USB_MODE_CTRL_MODE_HOST (0x3<<0)
+#define USB_MODE_CTRL_MODE_RSV (0x1<<0)
+#define USB_MODE_SETUP_LOCK_OFF (0x1<<3)
+#define USB_MODE_STREAM_DISABLE (0x1<<4)
+#define USB_MODE_ES (0x1<<2) /* Endian Select */
+
+/* control Register Bit Masks */
+#define USB_CTRL_IOENB (0x1<<2)
+#define USB_CTRL_ULPI_INT0EN (0x1<<0)
+
+/* BCSR5 */
+#define BCSR5_INT_USB (0x02)
+
+/* USB module clk cfg */
+#define SCCR_OFFS (0xA08)
+#define SCCR_USB_CLK_DISABLE (0x00000000) /* USB clk disable */
+#define SCCR_USB_MPHCM_11 (0x00c00000)
+#define SCCR_USB_MPHCM_01 (0x00400000)
+#define SCCR_USB_MPHCM_10 (0x00800000)
+#define SCCR_USB_DRCM_11 (0x00300000)
+#define SCCR_USB_DRCM_01 (0x00100000)
+#define SCCR_USB_DRCM_10 (0x00200000)
+
+#define SICRL_OFFS (0x114)
+#define SICRL_USB0 (0x40000000)
+#define SICRL_USB1 (0x20000000)
+
+#define SICRH_OFFS (0x118)
+#define SICRH_USB_UTMI (0x00020000)
+
+/* OTG interrupt enable bit masks */
+#define OTGSC_INTERRUPT_ENABLE_BITS_MASK \
+ (OTGSC_INTR_USB_ID_EN | \
+ OTGSC_INTR_1MS_TIMER_EN | \
+ OTGSC_INTR_A_VBUS_VALID_EN | \
+ OTGSC_INTR_A_SESSION_VALID_EN | \
+ OTGSC_INTR_B_SESSION_VALID_EN | \
+ OTGSC_INTR_B_SESSION_END_EN | \
+ OTGSC_INTR_DATA_PULSING_EN)
+
+/* OTG interrupt status bit masks */
+#define OTGSC_INTERRUPT_STATUS_BITS_MASK \
+ (OTGSC_INTSTS_USB_ID | \
+ OTGSC_INTR_1MS_TIMER_EN | \
+ OTGSC_INTSTS_A_VBUS_VALID | \
+ OTGSC_INTSTS_A_SESSION_VALID | \
+ OTGSC_INTSTS_B_SESSION_VALID | \
+ OTGSC_INTSTS_B_SESSION_END | \
+ OTGSC_INTSTS_DATA_PULSING)
+
+/*
+ * A-DEVICE timing constants
+ */
+
+/* Wait for VBUS Rise */
+#define TA_WAIT_VRISE (100) /* a_wait_vrise 100 ms, section: 6.6.5.1 */
+
+/* Wait for B-Connect */
+#define TA_WAIT_BCON (10000) /* a_wait_bcon > 1 sec, section: 6.6.5.2
+ * This is only used to get out of
+ * OTG_STATE_A_WAIT_BCON state if there was
+ * no connection for these many milliseconds
+ */
+
+/* A-Idle to B-Disconnect */
+/* It is necessary for this timer to be more than 750 ms because of a bug in OPT
+ * test 5.4 in which B OPT disconnects after 750 ms instead of 75ms as stated
+ * in the test description
+ */
+#define TA_AIDL_BDIS (5000) /* a_suspend minimum 200 ms, section: 6.6.5.3 */
+
+/* B-Idle to A-Disconnect */
+#define TA_BIDL_ADIS (12) /* 3 to 200 ms */
+
+/* B-device timing constants */
+
+
+/* Data-Line Pulse Time*/
+#define TB_DATA_PLS (10) /* b_srp_init,continue 5~10ms, section:5.3.3 */
+#define TB_DATA_PLS_MIN (5) /* minimum 5 ms */
+#define TB_DATA_PLS_MAX (10) /* maximum 10 ms */
+
+/* SRP Initiate Time */
+#define TB_SRP_INIT (100) /* b_srp_init,maximum 100 ms, section:5.3.8 */
+
+/* SRP Fail Time */
+#define TB_SRP_FAIL (7000) /* b_srp_init,Fail time 5~30s, section:6.8.2.2*/
+
+/* SRP result wait time */
+#define TB_SRP_WAIT (60)
+
+/* VBus time */
+#define TB_VBUS_PLS (30) /* time to keep vbus pulsing asserted */
+
+/* Discharge time */
+/* This time should be less than 10ms. It varies from system to system. */
+#define TB_VBUS_DSCHRG (8)
+
+/* A-SE0 to B-Reset */
+#define TB_ASE0_BRST (20) /* b_wait_acon, mini 3.125 ms,section:6.8.2.4 */
+
+/* A bus suspend timer before we can switch to b_wait_aconn */
+#define TB_A_SUSPEND (7)
+#define TB_BUS_RESUME (12)
+
+/* SE0 Time Before SRP */
+#define TB_SE0_SRP (2) /* b_idle,minimum 2 ms, section:5.3.2 */
+
+#define SET_OTG_STATE(phy, newstate) ((phy)->otg->state = newstate)
+
+struct usb_dr_mmap {
+ /* Capability register */
+ u8 res1[256];
+ u16 caplength; /* Capability Register Length */
+ u16 hciversion; /* Host Controller Interface Version */
+ u32 hcsparams; /* Host Controller Structual Parameters */
+ u32 hccparams; /* Host Controller Capability Parameters */
+ u8 res2[20];
+ u32 dciversion; /* Device Controller Interface Version */
+ u32 dccparams; /* Device Controller Capability Parameters */
+ u8 res3[24];
+ /* Operation register */
+ u32 usbcmd; /* USB Command Register */
+ u32 usbsts; /* USB Status Register */
+ u32 usbintr; /* USB Interrupt Enable Register */
+ u32 frindex; /* Frame Index Register */
+ u8 res4[4];
+ u32 deviceaddr; /* Device Address */
+ u32 endpointlistaddr; /* Endpoint List Address Register */
+ u8 res5[4];
+ u32 burstsize; /* Master Interface Data Burst Size Register */
+ u32 txttfilltuning; /* Transmit FIFO Tuning Controls Register */
+ u8 res6[8];
+ u32 ulpiview; /* ULPI register access */
+ u8 res7[12];
+ u32 configflag; /* Configure Flag Register */
+ u32 portsc; /* Port 1 Status and Control Register */
+ u8 res8[28];
+ u32 otgsc; /* On-The-Go Status and Control */
+ u32 usbmode; /* USB Mode Register */
+ u32 endptsetupstat; /* Endpoint Setup Status Register */
+ u32 endpointprime; /* Endpoint Initialization Register */
+ u32 endptflush; /* Endpoint Flush Register */
+ u32 endptstatus; /* Endpoint Status Register */
+ u32 endptcomplete; /* Endpoint Complete Register */
+ u32 endptctrl[6]; /* Endpoint Control Registers */
+ u8 res9[552];
+ u32 snoop1;
+ u32 snoop2;
+ u32 age_cnt_thresh; /* Age Count Threshold Register */
+ u32 pri_ctrl; /* Priority Control Register */
+ u32 si_ctrl; /* System Interface Control Register */
+ u8 res10[236];
+ u32 control; /* General Purpose Control Register */
+};
+
+struct fsl_otg_timer {
+ unsigned long expires; /* Number of count increase to timeout */
+ unsigned long count; /* Tick counter */
+ void (*function)(unsigned long); /* Timeout function */
+ unsigned long data; /* Data passed to function */
+ struct list_head list;
+};
+
+inline struct fsl_otg_timer *otg_timer_initializer
+(void (*function)(unsigned long), unsigned long expires, unsigned long data)
+{
+ struct fsl_otg_timer *timer;
+
+ timer = kmalloc(sizeof(struct fsl_otg_timer), GFP_KERNEL);
+ if (!timer)
+ return NULL;
+ timer->function = function;
+ timer->expires = expires;
+ timer->data = data;
+ return timer;
+}
+
+struct fsl_otg {
+ struct usb_phy phy;
+ struct otg_fsm fsm;
+ struct usb_dr_mmap *dr_mem_map;
+ struct delayed_work otg_event;
+
+ /* used for usb host */
+ struct work_struct work_wq;
+ u8 host_working;
+
+ int irq;
+};
+
+struct fsl_otg_config {
+ u8 otg_port;
+};
+
+/* For SRP and HNP handle */
+#define FSL_OTG_MAJOR 240
+#define FSL_OTG_NAME "fsl-usb2-otg"
+/* Command to OTG driver ioctl */
+#define OTG_IOCTL_MAGIC FSL_OTG_MAJOR
+/* if otg work as host, it should return 1, otherwise return 0 */
+#define GET_OTG_STATUS _IOR(OTG_IOCTL_MAGIC, 1, int)
+#define SET_A_SUSPEND_REQ _IOW(OTG_IOCTL_MAGIC, 2, int)
+#define SET_A_BUS_DROP _IOW(OTG_IOCTL_MAGIC, 3, int)
+#define SET_A_BUS_REQ _IOW(OTG_IOCTL_MAGIC, 4, int)
+#define SET_B_BUS_REQ _IOW(OTG_IOCTL_MAGIC, 5, int)
+#define GET_A_SUSPEND_REQ _IOR(OTG_IOCTL_MAGIC, 6, int)
+#define GET_A_BUS_DROP _IOR(OTG_IOCTL_MAGIC, 7, int)
+#define GET_A_BUS_REQ _IOR(OTG_IOCTL_MAGIC, 8, int)
+#define GET_B_BUS_REQ _IOR(OTG_IOCTL_MAGIC, 9, int)
+
+void fsl_otg_add_timer(struct otg_fsm *fsm, void *timer);
+void fsl_otg_del_timer(struct otg_fsm *fsm, void *timer);
+void fsl_otg_pulse_vbus(void);
diff --git a/kernel/drivers/usb/phy/phy-generic.c b/kernel/drivers/usb/phy/phy-generic.c
new file mode 100644
index 000000000..deee68eaf
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-generic.c
@@ -0,0 +1,374 @@
+/*
+ * NOP USB transceiver for all USB transceiver which are either built-in
+ * into USB IP or which are mostly autonomous.
+ *
+ * Copyright (C) 2009 Texas Instruments Inc
+ * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Current status:
+ * This provides a "nop" transceiver for PHYs which are
+ * autonomous such as isp1504, isp1707, etc.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/usb_phy_generic.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include "phy-generic.h"
+
+#define VBUS_IRQ_FLAGS \
+ (IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | \
+ IRQF_ONESHOT)
+
+struct platform_device *usb_phy_generic_register(void)
+{
+ return platform_device_register_simple("usb_phy_generic",
+ PLATFORM_DEVID_AUTO, NULL, 0);
+}
+EXPORT_SYMBOL_GPL(usb_phy_generic_register);
+
+void usb_phy_generic_unregister(struct platform_device *pdev)
+{
+ platform_device_unregister(pdev);
+}
+EXPORT_SYMBOL_GPL(usb_phy_generic_unregister);
+
+static int nop_set_suspend(struct usb_phy *x, int suspend)
+{
+ return 0;
+}
+
+static void nop_reset(struct usb_phy_generic *nop)
+{
+ if (!nop->gpiod_reset)
+ return;
+
+ gpiod_set_value(nop->gpiod_reset, 1);
+ usleep_range(10000, 20000);
+ gpiod_set_value(nop->gpiod_reset, 0);
+}
+
+/* interface to regulator framework */
+static void nop_set_vbus_draw(struct usb_phy_generic *nop, unsigned mA)
+{
+ struct regulator *vbus_draw = nop->vbus_draw;
+ int enabled;
+ int ret;
+
+ if (!vbus_draw)
+ return;
+
+ enabled = nop->vbus_draw_enabled;
+ if (mA) {
+ regulator_set_current_limit(vbus_draw, 0, 1000 * mA);
+ if (!enabled) {
+ ret = regulator_enable(vbus_draw);
+ if (ret < 0)
+ return;
+ nop->vbus_draw_enabled = 1;
+ }
+ } else {
+ if (enabled) {
+ ret = regulator_disable(vbus_draw);
+ if (ret < 0)
+ return;
+ nop->vbus_draw_enabled = 0;
+ }
+ }
+ nop->mA = mA;
+}
+
+
+static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
+{
+ struct usb_phy_generic *nop = data;
+ struct usb_otg *otg = nop->phy.otg;
+ int vbus, status;
+
+ vbus = gpiod_get_value(nop->gpiod_vbus);
+ if ((vbus ^ nop->vbus) == 0)
+ return IRQ_HANDLED;
+ nop->vbus = vbus;
+
+ if (vbus) {
+ status = USB_EVENT_VBUS;
+ otg->state = OTG_STATE_B_PERIPHERAL;
+ nop->phy.last_event = status;
+ usb_gadget_vbus_connect(otg->gadget);
+
+ /* drawing a "unit load" is *always* OK, except for OTG */
+ nop_set_vbus_draw(nop, 100);
+
+ atomic_notifier_call_chain(&nop->phy.notifier, status,
+ otg->gadget);
+ } else {
+ nop_set_vbus_draw(nop, 0);
+
+ usb_gadget_vbus_disconnect(otg->gadget);
+ status = USB_EVENT_NONE;
+ otg->state = OTG_STATE_B_IDLE;
+ nop->phy.last_event = status;
+
+ atomic_notifier_call_chain(&nop->phy.notifier, status,
+ otg->gadget);
+ }
+ return IRQ_HANDLED;
+}
+
+int usb_gen_phy_init(struct usb_phy *phy)
+{
+ struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
+
+ if (!IS_ERR(nop->vcc)) {
+ if (regulator_enable(nop->vcc))
+ dev_err(phy->dev, "Failed to enable power\n");
+ }
+
+ if (!IS_ERR(nop->clk))
+ clk_prepare_enable(nop->clk);
+
+ nop_reset(nop);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_gen_phy_init);
+
+void usb_gen_phy_shutdown(struct usb_phy *phy)
+{
+ struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
+
+ gpiod_set_value(nop->gpiod_reset, 1);
+
+ if (!IS_ERR(nop->clk))
+ clk_disable_unprepare(nop->clk);
+
+ if (!IS_ERR(nop->vcc)) {
+ if (regulator_disable(nop->vcc))
+ dev_err(phy->dev, "Failed to disable power\n");
+ }
+}
+EXPORT_SYMBOL_GPL(usb_gen_phy_shutdown);
+
+static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
+{
+ if (!otg)
+ return -ENODEV;
+
+ if (!gadget) {
+ otg->gadget = NULL;
+ return -ENODEV;
+ }
+
+ otg->gadget = gadget;
+ otg->state = OTG_STATE_B_IDLE;
+ return 0;
+}
+
+static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ if (!otg)
+ return -ENODEV;
+
+ if (!host) {
+ otg->host = NULL;
+ return -ENODEV;
+ }
+
+ otg->host = host;
+ return 0;
+}
+
+int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
+ struct usb_phy_generic_platform_data *pdata)
+{
+ enum usb_phy_type type = USB_PHY_TYPE_USB2;
+ int err = 0;
+
+ u32 clk_rate = 0;
+ bool needs_vcc = false;
+
+ if (dev->of_node) {
+ struct device_node *node = dev->of_node;
+
+ if (of_property_read_u32(node, "clock-frequency", &clk_rate))
+ clk_rate = 0;
+
+ needs_vcc = of_property_read_bool(node, "vcc-supply");
+ nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset");
+ err = PTR_ERR_OR_ZERO(nop->gpiod_reset);
+ if (!err) {
+ nop->gpiod_vbus = devm_gpiod_get_optional(dev,
+ "vbus-detect");
+ err = PTR_ERR_OR_ZERO(nop->gpiod_vbus);
+ }
+ } else if (pdata) {
+ type = pdata->type;
+ clk_rate = pdata->clk_rate;
+ needs_vcc = pdata->needs_vcc;
+ if (gpio_is_valid(pdata->gpio_reset)) {
+ err = devm_gpio_request_one(dev, pdata->gpio_reset, 0,
+ dev_name(dev));
+ if (!err)
+ nop->gpiod_reset =
+ gpio_to_desc(pdata->gpio_reset);
+ }
+ nop->gpiod_vbus = pdata->gpiod_vbus;
+ }
+
+ if (err == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ if (err) {
+ dev_err(dev, "Error requesting RESET or VBUS GPIO\n");
+ return err;
+ }
+ if (nop->gpiod_reset)
+ gpiod_direction_output(nop->gpiod_reset, 1);
+
+ nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg),
+ GFP_KERNEL);
+ if (!nop->phy.otg)
+ return -ENOMEM;
+
+ nop->clk = devm_clk_get(dev, "main_clk");
+ if (IS_ERR(nop->clk)) {
+ dev_dbg(dev, "Can't get phy clock: %ld\n",
+ PTR_ERR(nop->clk));
+ }
+
+ if (!IS_ERR(nop->clk) && clk_rate) {
+ err = clk_set_rate(nop->clk, clk_rate);
+ if (err) {
+ dev_err(dev, "Error setting clock rate\n");
+ return err;
+ }
+ }
+
+ nop->vcc = devm_regulator_get(dev, "vcc");
+ if (IS_ERR(nop->vcc)) {
+ dev_dbg(dev, "Error getting vcc regulator: %ld\n",
+ PTR_ERR(nop->vcc));
+ if (needs_vcc)
+ return -EPROBE_DEFER;
+ }
+
+ nop->dev = dev;
+ nop->phy.dev = nop->dev;
+ nop->phy.label = "nop-xceiv";
+ nop->phy.set_suspend = nop_set_suspend;
+ nop->phy.type = type;
+
+ nop->phy.otg->state = OTG_STATE_UNDEFINED;
+ nop->phy.otg->usb_phy = &nop->phy;
+ nop->phy.otg->set_host = nop_set_host;
+ nop->phy.otg->set_peripheral = nop_set_peripheral;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy);
+
+static int usb_phy_generic_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct usb_phy_generic *nop;
+ int err;
+
+ nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL);
+ if (!nop)
+ return -ENOMEM;
+
+ err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev));
+ if (err)
+ return err;
+ if (nop->gpiod_vbus) {
+ err = devm_request_threaded_irq(&pdev->dev,
+ gpiod_to_irq(nop->gpiod_vbus),
+ NULL, nop_gpio_vbus_thread,
+ VBUS_IRQ_FLAGS, "vbus_detect",
+ nop);
+ if (err) {
+ dev_err(&pdev->dev, "can't request irq %i, err: %d\n",
+ gpiod_to_irq(nop->gpiod_vbus), err);
+ return err;
+ }
+ }
+
+ nop->phy.init = usb_gen_phy_init;
+ nop->phy.shutdown = usb_gen_phy_shutdown;
+
+ err = usb_add_phy_dev(&nop->phy);
+ if (err) {
+ dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
+ err);
+ return err;
+ }
+
+ platform_set_drvdata(pdev, nop);
+
+ return 0;
+}
+
+static int usb_phy_generic_remove(struct platform_device *pdev)
+{
+ struct usb_phy_generic *nop = platform_get_drvdata(pdev);
+
+ usb_remove_phy(&nop->phy);
+
+ return 0;
+}
+
+static const struct of_device_id nop_xceiv_dt_ids[] = {
+ { .compatible = "usb-nop-xceiv" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids);
+
+static struct platform_driver usb_phy_generic_driver = {
+ .probe = usb_phy_generic_probe,
+ .remove = usb_phy_generic_remove,
+ .driver = {
+ .name = "usb_phy_generic",
+ .of_match_table = nop_xceiv_dt_ids,
+ },
+};
+
+static int __init usb_phy_generic_init(void)
+{
+ return platform_driver_register(&usb_phy_generic_driver);
+}
+subsys_initcall(usb_phy_generic_init);
+
+static void __exit usb_phy_generic_exit(void)
+{
+ platform_driver_unregister(&usb_phy_generic_driver);
+}
+module_exit(usb_phy_generic_exit);
+
+MODULE_ALIAS("platform:usb_phy_generic");
+MODULE_AUTHOR("Texas Instruments Inc");
+MODULE_DESCRIPTION("NOP USB Transceiver driver");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/usb/phy/phy-generic.h b/kernel/drivers/usb/phy/phy-generic.h
new file mode 100644
index 000000000..0d0eadd54
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-generic.h
@@ -0,0 +1,27 @@
+#ifndef _PHY_GENERIC_H_
+#define _PHY_GENERIC_H_
+
+#include <linux/usb/usb_phy_generic.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+
+struct usb_phy_generic {
+ struct usb_phy phy;
+ struct device *dev;
+ struct clk *clk;
+ struct regulator *vcc;
+ struct gpio_desc *gpiod_reset;
+ struct gpio_desc *gpiod_vbus;
+ struct regulator *vbus_draw;
+ bool vbus_draw_enabled;
+ unsigned long mA;
+ unsigned int vbus;
+};
+
+int usb_gen_phy_init(struct usb_phy *phy);
+void usb_gen_phy_shutdown(struct usb_phy *phy);
+
+int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
+ struct usb_phy_generic_platform_data *pdata);
+
+#endif
diff --git a/kernel/drivers/usb/phy/phy-gpio-vbus-usb.c b/kernel/drivers/usb/phy/phy-gpio-vbus-usb.c
new file mode 100644
index 000000000..f66120db8
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-gpio-vbus-usb.c
@@ -0,0 +1,397 @@
+/*
+ * gpio-vbus.c - simple GPIO VBUS sensing driver for B peripheral devices
+ *
+ * Copyright (c) 2008 Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/usb.h>
+#include <linux/workqueue.h>
+
+#include <linux/regulator/consumer.h>
+
+#include <linux/usb/gadget.h>
+#include <linux/usb/gpio_vbus.h>
+#include <linux/usb/otg.h>
+
+
+/*
+ * A simple GPIO VBUS sensing driver for B peripheral only devices
+ * with internal transceivers. It can control a D+ pullup GPIO and
+ * a regulator to limit the current drawn from VBUS.
+ *
+ * Needs to be loaded before the UDC driver that will use it.
+ */
+struct gpio_vbus_data {
+ struct usb_phy phy;
+ struct device *dev;
+ struct regulator *vbus_draw;
+ int vbus_draw_enabled;
+ unsigned mA;
+ struct delayed_work work;
+ int vbus;
+ int irq;
+};
+
+
+/*
+ * This driver relies on "both edges" triggering. VBUS has 100 msec to
+ * stabilize, so the peripheral controller driver may need to cope with
+ * some bouncing due to current surges (e.g. charging local capacitance)
+ * and contact chatter.
+ *
+ * REVISIT in desperate straits, toggling between rising and falling
+ * edges might be workable.
+ */
+#define VBUS_IRQ_FLAGS \
+ (IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING)
+
+
+/* interface to regulator framework */
+static void set_vbus_draw(struct gpio_vbus_data *gpio_vbus, unsigned mA)
+{
+ struct regulator *vbus_draw = gpio_vbus->vbus_draw;
+ int enabled;
+ int ret;
+
+ if (!vbus_draw)
+ return;
+
+ enabled = gpio_vbus->vbus_draw_enabled;
+ if (mA) {
+ regulator_set_current_limit(vbus_draw, 0, 1000 * mA);
+ if (!enabled) {
+ ret = regulator_enable(vbus_draw);
+ if (ret < 0)
+ return;
+ gpio_vbus->vbus_draw_enabled = 1;
+ }
+ } else {
+ if (enabled) {
+ ret = regulator_disable(vbus_draw);
+ if (ret < 0)
+ return;
+ gpio_vbus->vbus_draw_enabled = 0;
+ }
+ }
+ gpio_vbus->mA = mA;
+}
+
+static int is_vbus_powered(struct gpio_vbus_mach_info *pdata)
+{
+ int vbus;
+
+ vbus = gpio_get_value(pdata->gpio_vbus);
+ if (pdata->gpio_vbus_inverted)
+ vbus = !vbus;
+
+ return vbus;
+}
+
+static void gpio_vbus_work(struct work_struct *work)
+{
+ struct gpio_vbus_data *gpio_vbus =
+ container_of(work, struct gpio_vbus_data, work.work);
+ struct gpio_vbus_mach_info *pdata = dev_get_platdata(gpio_vbus->dev);
+ int gpio, status, vbus;
+
+ if (!gpio_vbus->phy.otg->gadget)
+ return;
+
+ vbus = is_vbus_powered(pdata);
+ if ((vbus ^ gpio_vbus->vbus) == 0)
+ return;
+ gpio_vbus->vbus = vbus;
+
+ /* Peripheral controllers which manage the pullup themselves won't have
+ * gpio_pullup configured here. If it's configured here, we'll do what
+ * isp1301_omap::b_peripheral() does and enable the pullup here... although
+ * that may complicate usb_gadget_{,dis}connect() support.
+ */
+ gpio = pdata->gpio_pullup;
+
+ if (vbus) {
+ status = USB_EVENT_VBUS;
+ gpio_vbus->phy.otg->state = OTG_STATE_B_PERIPHERAL;
+ gpio_vbus->phy.last_event = status;
+ usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget);
+
+ /* drawing a "unit load" is *always* OK, except for OTG */
+ set_vbus_draw(gpio_vbus, 100);
+
+ /* optionally enable D+ pullup */
+ if (gpio_is_valid(gpio))
+ gpio_set_value(gpio, !pdata->gpio_pullup_inverted);
+
+ atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
+ status, gpio_vbus->phy.otg->gadget);
+ usb_phy_set_event(&gpio_vbus->phy, USB_EVENT_ENUMERATED);
+ } else {
+ /* optionally disable D+ pullup */
+ if (gpio_is_valid(gpio))
+ gpio_set_value(gpio, pdata->gpio_pullup_inverted);
+
+ set_vbus_draw(gpio_vbus, 0);
+
+ usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget);
+ status = USB_EVENT_NONE;
+ gpio_vbus->phy.otg->state = OTG_STATE_B_IDLE;
+ gpio_vbus->phy.last_event = status;
+
+ atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
+ status, gpio_vbus->phy.otg->gadget);
+ usb_phy_set_event(&gpio_vbus->phy, USB_EVENT_NONE);
+ }
+}
+
+/* VBUS change IRQ handler */
+static irqreturn_t gpio_vbus_irq(int irq, void *data)
+{
+ struct platform_device *pdev = data;
+ struct gpio_vbus_mach_info *pdata = dev_get_platdata(&pdev->dev);
+ struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev);
+ struct usb_otg *otg = gpio_vbus->phy.otg;
+
+ dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n",
+ is_vbus_powered(pdata) ? "supplied" : "inactive",
+ otg->gadget ? otg->gadget->name : "none");
+
+ if (otg->gadget)
+ schedule_delayed_work(&gpio_vbus->work, msecs_to_jiffies(100));
+
+ return IRQ_HANDLED;
+}
+
+/* OTG transceiver interface */
+
+/* bind/unbind the peripheral controller */
+static int gpio_vbus_set_peripheral(struct usb_otg *otg,
+ struct usb_gadget *gadget)
+{
+ struct gpio_vbus_data *gpio_vbus;
+ struct gpio_vbus_mach_info *pdata;
+ struct platform_device *pdev;
+ int gpio;
+
+ gpio_vbus = container_of(otg->usb_phy, struct gpio_vbus_data, phy);
+ pdev = to_platform_device(gpio_vbus->dev);
+ pdata = dev_get_platdata(gpio_vbus->dev);
+ gpio = pdata->gpio_pullup;
+
+ if (!gadget) {
+ dev_dbg(&pdev->dev, "unregistering gadget '%s'\n",
+ otg->gadget->name);
+
+ /* optionally disable D+ pullup */
+ if (gpio_is_valid(gpio))
+ gpio_set_value(gpio, pdata->gpio_pullup_inverted);
+
+ set_vbus_draw(gpio_vbus, 0);
+
+ usb_gadget_vbus_disconnect(otg->gadget);
+ otg->state = OTG_STATE_UNDEFINED;
+
+ otg->gadget = NULL;
+ return 0;
+ }
+
+ otg->gadget = gadget;
+ dev_dbg(&pdev->dev, "registered gadget '%s'\n", gadget->name);
+
+ /* initialize connection state */
+ gpio_vbus->vbus = 0; /* start with disconnected */
+ gpio_vbus_irq(gpio_vbus->irq, pdev);
+ return 0;
+}
+
+/* effective for B devices, ignored for A-peripheral */
+static int gpio_vbus_set_power(struct usb_phy *phy, unsigned mA)
+{
+ struct gpio_vbus_data *gpio_vbus;
+
+ gpio_vbus = container_of(phy, struct gpio_vbus_data, phy);
+
+ if (phy->otg->state == OTG_STATE_B_PERIPHERAL)
+ set_vbus_draw(gpio_vbus, mA);
+ return 0;
+}
+
+/* for non-OTG B devices: set/clear transceiver suspend mode */
+static int gpio_vbus_set_suspend(struct usb_phy *phy, int suspend)
+{
+ struct gpio_vbus_data *gpio_vbus;
+
+ gpio_vbus = container_of(phy, struct gpio_vbus_data, phy);
+
+ /* draw max 0 mA from vbus in suspend mode; or the previously
+ * recorded amount of current if not suspended
+ *
+ * NOTE: high powered configs (mA > 100) may draw up to 2.5 mA
+ * if they're wake-enabled ... we don't handle that yet.
+ */
+ return gpio_vbus_set_power(phy, suspend ? 0 : gpio_vbus->mA);
+}
+
+/* platform driver interface */
+
+static int gpio_vbus_probe(struct platform_device *pdev)
+{
+ struct gpio_vbus_mach_info *pdata = dev_get_platdata(&pdev->dev);
+ struct gpio_vbus_data *gpio_vbus;
+ struct resource *res;
+ int err, gpio, irq;
+ unsigned long irqflags;
+
+ if (!pdata || !gpio_is_valid(pdata->gpio_vbus))
+ return -EINVAL;
+ gpio = pdata->gpio_vbus;
+
+ gpio_vbus = devm_kzalloc(&pdev->dev, sizeof(struct gpio_vbus_data),
+ GFP_KERNEL);
+ if (!gpio_vbus)
+ return -ENOMEM;
+
+ gpio_vbus->phy.otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg),
+ GFP_KERNEL);
+ if (!gpio_vbus->phy.otg)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, gpio_vbus);
+ gpio_vbus->dev = &pdev->dev;
+ gpio_vbus->phy.label = "gpio-vbus";
+ gpio_vbus->phy.dev = gpio_vbus->dev;
+ gpio_vbus->phy.set_power = gpio_vbus_set_power;
+ gpio_vbus->phy.set_suspend = gpio_vbus_set_suspend;
+
+ gpio_vbus->phy.otg->state = OTG_STATE_UNDEFINED;
+ gpio_vbus->phy.otg->usb_phy = &gpio_vbus->phy;
+ gpio_vbus->phy.otg->set_peripheral = gpio_vbus_set_peripheral;
+
+ err = devm_gpio_request(&pdev->dev, gpio, "vbus_detect");
+ if (err) {
+ dev_err(&pdev->dev, "can't request vbus gpio %d, err: %d\n",
+ gpio, err);
+ return err;
+ }
+ gpio_direction_input(gpio);
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (res) {
+ irq = res->start;
+ irqflags = (res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED;
+ } else {
+ irq = gpio_to_irq(gpio);
+ irqflags = VBUS_IRQ_FLAGS;
+ }
+
+ gpio_vbus->irq = irq;
+
+ /* if data line pullup is in use, initialize it to "not pulling up" */
+ gpio = pdata->gpio_pullup;
+ if (gpio_is_valid(gpio)) {
+ err = devm_gpio_request(&pdev->dev, gpio, "udc_pullup");
+ if (err) {
+ dev_err(&pdev->dev,
+ "can't request pullup gpio %d, err: %d\n",
+ gpio, err);
+ return err;
+ }
+ gpio_direction_output(gpio, pdata->gpio_pullup_inverted);
+ }
+
+ err = devm_request_irq(&pdev->dev, irq, gpio_vbus_irq, irqflags,
+ "vbus_detect", pdev);
+ if (err) {
+ dev_err(&pdev->dev, "can't request irq %i, err: %d\n",
+ irq, err);
+ return err;
+ }
+
+ INIT_DELAYED_WORK(&gpio_vbus->work, gpio_vbus_work);
+
+ gpio_vbus->vbus_draw = devm_regulator_get(&pdev->dev, "vbus_draw");
+ if (IS_ERR(gpio_vbus->vbus_draw)) {
+ dev_dbg(&pdev->dev, "can't get vbus_draw regulator, err: %ld\n",
+ PTR_ERR(gpio_vbus->vbus_draw));
+ gpio_vbus->vbus_draw = NULL;
+ }
+
+ /* only active when a gadget is registered */
+ err = usb_add_phy(&gpio_vbus->phy, USB_PHY_TYPE_USB2);
+ if (err) {
+ dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
+ err);
+ return err;
+ }
+
+ device_init_wakeup(&pdev->dev, pdata->wakeup);
+
+ return 0;
+}
+
+static int gpio_vbus_remove(struct platform_device *pdev)
+{
+ struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev);
+
+ device_init_wakeup(&pdev->dev, 0);
+ cancel_delayed_work_sync(&gpio_vbus->work);
+
+ usb_remove_phy(&gpio_vbus->phy);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int gpio_vbus_pm_suspend(struct device *dev)
+{
+ struct gpio_vbus_data *gpio_vbus = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(gpio_vbus->irq);
+
+ return 0;
+}
+
+static int gpio_vbus_pm_resume(struct device *dev)
+{
+ struct gpio_vbus_data *gpio_vbus = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(gpio_vbus->irq);
+
+ return 0;
+}
+
+static const struct dev_pm_ops gpio_vbus_dev_pm_ops = {
+ .suspend = gpio_vbus_pm_suspend,
+ .resume = gpio_vbus_pm_resume,
+};
+#endif
+
+MODULE_ALIAS("platform:gpio-vbus");
+
+static struct platform_driver gpio_vbus_driver = {
+ .driver = {
+ .name = "gpio-vbus",
+#ifdef CONFIG_PM
+ .pm = &gpio_vbus_dev_pm_ops,
+#endif
+ },
+ .probe = gpio_vbus_probe,
+ .remove = gpio_vbus_remove,
+};
+
+module_platform_driver(gpio_vbus_driver);
+
+MODULE_DESCRIPTION("simple GPIO controlled OTG transceiver driver");
+MODULE_AUTHOR("Philipp Zabel");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/usb/phy/phy-isp1301-omap.c b/kernel/drivers/usb/phy/phy-isp1301-omap.c
new file mode 100644
index 000000000..3af263cc0
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-isp1301-omap.c
@@ -0,0 +1,1650 @@
+/*
+ * isp1301_omap - ISP 1301 USB transceiver, talking to OMAP OTG controller
+ *
+ * Copyright (C) 2004 Texas Instruments
+ * Copyright (C) 2004 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/mux.h>
+
+#include <mach/usb.h>
+
+#undef VERBOSE
+
+
+#define DRIVER_VERSION "24 August 2004"
+#define DRIVER_NAME (isp1301_driver.driver.name)
+
+MODULE_DESCRIPTION("ISP1301 USB OTG Transceiver Driver");
+MODULE_LICENSE("GPL");
+
+struct isp1301 {
+ struct usb_phy phy;
+ struct i2c_client *client;
+ void (*i2c_release)(struct device *dev);
+
+ int irq_type;
+
+ u32 last_otg_ctrl;
+ unsigned working:1;
+
+ struct timer_list timer;
+
+ /* use keventd context to change the state for us */
+ struct work_struct work;
+
+ unsigned long todo;
+# define WORK_UPDATE_ISP 0 /* update ISP from OTG */
+# define WORK_UPDATE_OTG 1 /* update OTG from ISP */
+# define WORK_HOST_RESUME 4 /* resume host */
+# define WORK_TIMER 6 /* timer fired */
+# define WORK_STOP 7 /* don't resubmit */
+};
+
+
+/* bits in OTG_CTRL */
+
+#define OTG_XCEIV_OUTPUTS \
+ (OTG_ASESSVLD|OTG_BSESSEND|OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID)
+#define OTG_XCEIV_INPUTS \
+ (OTG_PULLDOWN|OTG_PULLUP|OTG_DRV_VBUS|OTG_PD_VBUS|OTG_PU_VBUS|OTG_PU_ID)
+#define OTG_CTRL_BITS \
+ (OTG_A_BUSREQ|OTG_A_SETB_HNPEN|OTG_B_BUSREQ|OTG_B_HNPEN|OTG_BUSDROP)
+ /* and OTG_PULLUP is sometimes written */
+
+#define OTG_CTRL_MASK (OTG_DRIVER_SEL| \
+ OTG_XCEIV_OUTPUTS|OTG_XCEIV_INPUTS| \
+ OTG_CTRL_BITS)
+
+
+/*-------------------------------------------------------------------------*/
+
+/* board-specific PM hooks */
+
+#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3)
+
+#if defined(CONFIG_TPS65010) || (defined(CONFIG_TPS65010_MODULE) && defined(MODULE))
+
+#include <linux/i2c/tps65010.h>
+
+#else
+
+static inline int tps65010_set_vbus_draw(unsigned mA)
+{
+ pr_debug("tps65010: draw %d mA (STUB)\n", mA);
+ return 0;
+}
+
+#endif
+
+static void enable_vbus_draw(struct isp1301 *isp, unsigned mA)
+{
+ int status = tps65010_set_vbus_draw(mA);
+ if (status < 0)
+ pr_debug(" VBUS %d mA error %d\n", mA, status);
+}
+
+#else
+
+static void enable_vbus_draw(struct isp1301 *isp, unsigned mA)
+{
+ /* H4 controls this by DIP switch S2.4; no soft control.
+ * ON means the charger is always enabled. Leave it OFF
+ * unless the OTG port is used only in B-peripheral mode.
+ */
+}
+
+#endif
+
+static void enable_vbus_source(struct isp1301 *isp)
+{
+ /* this board won't supply more than 8mA vbus power.
+ * some boards can switch a 100ma "unit load" (or more).
+ */
+}
+
+
+/* products will deliver OTG messages with LEDs, GUI, etc */
+static inline void notresponding(struct isp1301 *isp)
+{
+ printk(KERN_NOTICE "OTG device not responding.\n");
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static struct i2c_driver isp1301_driver;
+
+/* smbus apis are used for portability */
+
+static inline u8
+isp1301_get_u8(struct isp1301 *isp, u8 reg)
+{
+ return i2c_smbus_read_byte_data(isp->client, reg + 0);
+}
+
+static inline int
+isp1301_get_u16(struct isp1301 *isp, u8 reg)
+{
+ return i2c_smbus_read_word_data(isp->client, reg);
+}
+
+static inline int
+isp1301_set_bits(struct isp1301 *isp, u8 reg, u8 bits)
+{
+ return i2c_smbus_write_byte_data(isp->client, reg + 0, bits);
+}
+
+static inline int
+isp1301_clear_bits(struct isp1301 *isp, u8 reg, u8 bits)
+{
+ return i2c_smbus_write_byte_data(isp->client, reg + 1, bits);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* identification */
+#define ISP1301_VENDOR_ID 0x00 /* u16 read */
+#define ISP1301_PRODUCT_ID 0x02 /* u16 read */
+#define ISP1301_BCD_DEVICE 0x14 /* u16 read */
+
+#define I2C_VENDOR_ID_PHILIPS 0x04cc
+#define I2C_PRODUCT_ID_PHILIPS_1301 0x1301
+
+/* operational registers */
+#define ISP1301_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */
+# define MC1_SPEED (1 << 0)
+# define MC1_SUSPEND (1 << 1)
+# define MC1_DAT_SE0 (1 << 2)
+# define MC1_TRANSPARENT (1 << 3)
+# define MC1_BDIS_ACON_EN (1 << 4)
+# define MC1_OE_INT_EN (1 << 5)
+# define MC1_UART_EN (1 << 6)
+# define MC1_MASK 0x7f
+#define ISP1301_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */
+# define MC2_GLOBAL_PWR_DN (1 << 0)
+# define MC2_SPD_SUSP_CTRL (1 << 1)
+# define MC2_BI_DI (1 << 2)
+# define MC2_TRANSP_BDIR0 (1 << 3)
+# define MC2_TRANSP_BDIR1 (1 << 4)
+# define MC2_AUDIO_EN (1 << 5)
+# define MC2_PSW_EN (1 << 6)
+# define MC2_EN2V7 (1 << 7)
+#define ISP1301_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */
+# define OTG1_DP_PULLUP (1 << 0)
+# define OTG1_DM_PULLUP (1 << 1)
+# define OTG1_DP_PULLDOWN (1 << 2)
+# define OTG1_DM_PULLDOWN (1 << 3)
+# define OTG1_ID_PULLDOWN (1 << 4)
+# define OTG1_VBUS_DRV (1 << 5)
+# define OTG1_VBUS_DISCHRG (1 << 6)
+# define OTG1_VBUS_CHRG (1 << 7)
+#define ISP1301_OTG_STATUS 0x10 /* u8 readonly */
+# define OTG_B_SESS_END (1 << 6)
+# define OTG_B_SESS_VLD (1 << 7)
+
+#define ISP1301_INTERRUPT_SOURCE 0x08 /* u8 read */
+#define ISP1301_INTERRUPT_LATCH 0x0A /* u8 read, set, +1 clear */
+
+#define ISP1301_INTERRUPT_FALLING 0x0C /* u8 read, set, +1 clear */
+#define ISP1301_INTERRUPT_RISING 0x0E /* u8 read, set, +1 clear */
+
+/* same bitfields in all interrupt registers */
+# define INTR_VBUS_VLD (1 << 0)
+# define INTR_SESS_VLD (1 << 1)
+# define INTR_DP_HI (1 << 2)
+# define INTR_ID_GND (1 << 3)
+# define INTR_DM_HI (1 << 4)
+# define INTR_ID_FLOAT (1 << 5)
+# define INTR_BDIS_ACON (1 << 6)
+# define INTR_CR_INT (1 << 7)
+
+/*-------------------------------------------------------------------------*/
+
+static inline const char *state_name(struct isp1301 *isp)
+{
+ return usb_otg_state_string(isp->phy.otg->state);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* NOTE: some of this ISP1301 setup is specific to H2 boards;
+ * not everything is guarded by board-specific checks, or even using
+ * omap_usb_config data to deduce MC1_DAT_SE0 and MC2_BI_DI.
+ *
+ * ALSO: this currently doesn't use ISP1301 low-power modes
+ * while OTG is running.
+ */
+
+static void power_down(struct isp1301 *isp)
+{
+ isp->phy.otg->state = OTG_STATE_UNDEFINED;
+
+ // isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
+ isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND);
+
+ isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_ID_PULLDOWN);
+ isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
+}
+
+static void power_up(struct isp1301 *isp)
+{
+ // isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
+ isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND);
+
+ /* do this only when cpu is driving transceiver,
+ * so host won't see a low speed device...
+ */
+ isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
+}
+
+#define NO_HOST_SUSPEND
+
+static int host_suspend(struct isp1301 *isp)
+{
+#ifdef NO_HOST_SUSPEND
+ return 0;
+#else
+ struct device *dev;
+
+ if (!isp->phy.otg->host)
+ return -ENODEV;
+
+ /* Currently ASSUMES only the OTG port matters;
+ * other ports could be active...
+ */
+ dev = isp->phy.otg->host->controller;
+ return dev->driver->suspend(dev, 3, 0);
+#endif
+}
+
+static int host_resume(struct isp1301 *isp)
+{
+#ifdef NO_HOST_SUSPEND
+ return 0;
+#else
+ struct device *dev;
+
+ if (!isp->phy.otg->host)
+ return -ENODEV;
+
+ dev = isp->phy.otg->host->controller;
+ return dev->driver->resume(dev, 0);
+#endif
+}
+
+static int gadget_suspend(struct isp1301 *isp)
+{
+ isp->phy.otg->gadget->b_hnp_enable = 0;
+ isp->phy.otg->gadget->a_hnp_support = 0;
+ isp->phy.otg->gadget->a_alt_hnp_support = 0;
+ return usb_gadget_vbus_disconnect(isp->phy.otg->gadget);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#define TIMER_MINUTES 10
+#define TIMER_JIFFIES (TIMER_MINUTES * 60 * HZ)
+
+/* Almost all our I2C messaging comes from a work queue's task context.
+ * NOTE: guaranteeing certain response times might mean we shouldn't
+ * share keventd's work queue; a realtime task might be safest.
+ */
+static void isp1301_defer_work(struct isp1301 *isp, int work)
+{
+ int status;
+
+ if (isp && !test_and_set_bit(work, &isp->todo)) {
+ (void) get_device(&isp->client->dev);
+ status = schedule_work(&isp->work);
+ if (!status && !isp->working)
+ dev_vdbg(&isp->client->dev,
+ "work item %d may be lost\n", work);
+ }
+}
+
+/* called from irq handlers */
+static void a_idle(struct isp1301 *isp, const char *tag)
+{
+ u32 l;
+
+ if (isp->phy.otg->state == OTG_STATE_A_IDLE)
+ return;
+
+ isp->phy.otg->default_a = 1;
+ if (isp->phy.otg->host) {
+ isp->phy.otg->host->is_b_host = 0;
+ host_suspend(isp);
+ }
+ if (isp->phy.otg->gadget) {
+ isp->phy.otg->gadget->is_a_peripheral = 1;
+ gadget_suspend(isp);
+ }
+ isp->phy.otg->state = OTG_STATE_A_IDLE;
+ l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
+ omap_writel(l, OTG_CTRL);
+ isp->last_otg_ctrl = l;
+ pr_debug(" --> %s/%s\n", state_name(isp), tag);
+}
+
+/* called from irq handlers */
+static void b_idle(struct isp1301 *isp, const char *tag)
+{
+ u32 l;
+
+ if (isp->phy.otg->state == OTG_STATE_B_IDLE)
+ return;
+
+ isp->phy.otg->default_a = 0;
+ if (isp->phy.otg->host) {
+ isp->phy.otg->host->is_b_host = 1;
+ host_suspend(isp);
+ }
+ if (isp->phy.otg->gadget) {
+ isp->phy.otg->gadget->is_a_peripheral = 0;
+ gadget_suspend(isp);
+ }
+ isp->phy.otg->state = OTG_STATE_B_IDLE;
+ l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
+ omap_writel(l, OTG_CTRL);
+ isp->last_otg_ctrl = l;
+ pr_debug(" --> %s/%s\n", state_name(isp), tag);
+}
+
+static void
+dump_regs(struct isp1301 *isp, const char *label)
+{
+ u8 ctrl = isp1301_get_u8(isp, ISP1301_OTG_CONTROL_1);
+ u8 status = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
+ u8 src = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE);
+
+ pr_debug("otg: %06x, %s %s, otg/%02x stat/%02x.%02x\n",
+ omap_readl(OTG_CTRL), label, state_name(isp),
+ ctrl, status, src);
+ /* mode control and irq enables don't change much */
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_USB_OTG
+
+/*
+ * The OMAP OTG controller handles most of the OTG state transitions.
+ *
+ * We translate isp1301 outputs (mostly voltage comparator status) into
+ * OTG inputs; OTG outputs (mostly pullup/pulldown controls) and HNP state
+ * flags into isp1301 inputs ... and infer state transitions.
+ */
+
+#ifdef VERBOSE
+
+static void check_state(struct isp1301 *isp, const char *tag)
+{
+ enum usb_otg_state state = OTG_STATE_UNDEFINED;
+ u8 fsm = omap_readw(OTG_TEST) & 0x0ff;
+ unsigned extra = 0;
+
+ switch (fsm) {
+
+ /* default-b */
+ case 0x0:
+ state = OTG_STATE_B_IDLE;
+ break;
+ case 0x3:
+ case 0x7:
+ extra = 1;
+ case 0x1:
+ state = OTG_STATE_B_PERIPHERAL;
+ break;
+ case 0x11:
+ state = OTG_STATE_B_SRP_INIT;
+ break;
+
+ /* extra dual-role default-b states */
+ case 0x12:
+ case 0x13:
+ case 0x16:
+ extra = 1;
+ case 0x17:
+ state = OTG_STATE_B_WAIT_ACON;
+ break;
+ case 0x34:
+ state = OTG_STATE_B_HOST;
+ break;
+
+ /* default-a */
+ case 0x36:
+ state = OTG_STATE_A_IDLE;
+ break;
+ case 0x3c:
+ state = OTG_STATE_A_WAIT_VFALL;
+ break;
+ case 0x7d:
+ state = OTG_STATE_A_VBUS_ERR;
+ break;
+ case 0x9e:
+ case 0x9f:
+ extra = 1;
+ case 0x89:
+ state = OTG_STATE_A_PERIPHERAL;
+ break;
+ case 0xb7:
+ state = OTG_STATE_A_WAIT_VRISE;
+ break;
+ case 0xb8:
+ state = OTG_STATE_A_WAIT_BCON;
+ break;
+ case 0xb9:
+ state = OTG_STATE_A_HOST;
+ break;
+ case 0xba:
+ state = OTG_STATE_A_SUSPEND;
+ break;
+ default:
+ break;
+ }
+ if (isp->phy.otg->state == state && !extra)
+ return;
+ pr_debug("otg: %s FSM %s/%02x, %s, %06x\n", tag,
+ usb_otg_state_string(state), fsm, state_name(isp),
+ omap_readl(OTG_CTRL));
+}
+
+#else
+
+static inline void check_state(struct isp1301 *isp, const char *tag) { }
+
+#endif
+
+/* outputs from ISP1301_INTERRUPT_SOURCE */
+static void update_otg1(struct isp1301 *isp, u8 int_src)
+{
+ u32 otg_ctrl;
+
+ otg_ctrl = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
+ otg_ctrl &= ~OTG_XCEIV_INPUTS;
+ otg_ctrl &= ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD);
+
+ if (int_src & INTR_SESS_VLD)
+ otg_ctrl |= OTG_ASESSVLD;
+ else if (isp->phy.otg->state == OTG_STATE_A_WAIT_VFALL) {
+ a_idle(isp, "vfall");
+ otg_ctrl &= ~OTG_CTRL_BITS;
+ }
+ if (int_src & INTR_VBUS_VLD)
+ otg_ctrl |= OTG_VBUSVLD;
+ if (int_src & INTR_ID_GND) { /* default-A */
+ if (isp->phy.otg->state == OTG_STATE_B_IDLE
+ || isp->phy.otg->state
+ == OTG_STATE_UNDEFINED) {
+ a_idle(isp, "init");
+ return;
+ }
+ } else { /* default-B */
+ otg_ctrl |= OTG_ID;
+ if (isp->phy.otg->state == OTG_STATE_A_IDLE
+ || isp->phy.otg->state == OTG_STATE_UNDEFINED) {
+ b_idle(isp, "init");
+ return;
+ }
+ }
+ omap_writel(otg_ctrl, OTG_CTRL);
+}
+
+/* outputs from ISP1301_OTG_STATUS */
+static void update_otg2(struct isp1301 *isp, u8 otg_status)
+{
+ u32 otg_ctrl;
+
+ otg_ctrl = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
+ otg_ctrl &= ~OTG_XCEIV_INPUTS;
+ otg_ctrl &= ~(OTG_BSESSVLD | OTG_BSESSEND);
+ if (otg_status & OTG_B_SESS_VLD)
+ otg_ctrl |= OTG_BSESSVLD;
+ else if (otg_status & OTG_B_SESS_END)
+ otg_ctrl |= OTG_BSESSEND;
+ omap_writel(otg_ctrl, OTG_CTRL);
+}
+
+/* inputs going to ISP1301 */
+static void otg_update_isp(struct isp1301 *isp)
+{
+ u32 otg_ctrl, otg_change;
+ u8 set = OTG1_DM_PULLDOWN, clr = OTG1_DM_PULLUP;
+
+ otg_ctrl = omap_readl(OTG_CTRL);
+ otg_change = otg_ctrl ^ isp->last_otg_ctrl;
+ isp->last_otg_ctrl = otg_ctrl;
+ otg_ctrl = otg_ctrl & OTG_XCEIV_INPUTS;
+
+ switch (isp->phy.otg->state) {
+ case OTG_STATE_B_IDLE:
+ case OTG_STATE_B_PERIPHERAL:
+ case OTG_STATE_B_SRP_INIT:
+ if (!(otg_ctrl & OTG_PULLUP)) {
+ // if (otg_ctrl & OTG_B_HNPEN) {
+ if (isp->phy.otg->gadget->b_hnp_enable) {
+ isp->phy.otg->state = OTG_STATE_B_WAIT_ACON;
+ pr_debug(" --> b_wait_acon\n");
+ }
+ goto pulldown;
+ }
+pullup:
+ set |= OTG1_DP_PULLUP;
+ clr |= OTG1_DP_PULLDOWN;
+ break;
+ case OTG_STATE_A_SUSPEND:
+ case OTG_STATE_A_PERIPHERAL:
+ if (otg_ctrl & OTG_PULLUP)
+ goto pullup;
+ /* FALLTHROUGH */
+ // case OTG_STATE_B_WAIT_ACON:
+ default:
+pulldown:
+ set |= OTG1_DP_PULLDOWN;
+ clr |= OTG1_DP_PULLUP;
+ break;
+ }
+
+# define toggle(OTG,ISP) do { \
+ if (otg_ctrl & OTG) set |= ISP; \
+ else clr |= ISP; \
+ } while (0)
+
+ if (!(isp->phy.otg->host))
+ otg_ctrl &= ~OTG_DRV_VBUS;
+
+ switch (isp->phy.otg->state) {
+ case OTG_STATE_A_SUSPEND:
+ if (otg_ctrl & OTG_DRV_VBUS) {
+ set |= OTG1_VBUS_DRV;
+ break;
+ }
+ /* HNP failed for some reason (A_AIDL_BDIS timeout) */
+ notresponding(isp);
+
+ /* FALLTHROUGH */
+ case OTG_STATE_A_VBUS_ERR:
+ isp->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
+ pr_debug(" --> a_wait_vfall\n");
+ /* FALLTHROUGH */
+ case OTG_STATE_A_WAIT_VFALL:
+ /* FIXME usbcore thinks port power is still on ... */
+ clr |= OTG1_VBUS_DRV;
+ break;
+ case OTG_STATE_A_IDLE:
+ if (otg_ctrl & OTG_DRV_VBUS) {
+ isp->phy.otg->state = OTG_STATE_A_WAIT_VRISE;
+ pr_debug(" --> a_wait_vrise\n");
+ }
+ /* FALLTHROUGH */
+ default:
+ toggle(OTG_DRV_VBUS, OTG1_VBUS_DRV);
+ }
+
+ toggle(OTG_PU_VBUS, OTG1_VBUS_CHRG);
+ toggle(OTG_PD_VBUS, OTG1_VBUS_DISCHRG);
+
+# undef toggle
+
+ isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, set);
+ isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, clr);
+
+ /* HNP switch to host or peripheral; and SRP */
+ if (otg_change & OTG_PULLUP) {
+ u32 l;
+
+ switch (isp->phy.otg->state) {
+ case OTG_STATE_B_IDLE:
+ if (clr & OTG1_DP_PULLUP)
+ break;
+ isp->phy.otg->state = OTG_STATE_B_PERIPHERAL;
+ pr_debug(" --> b_peripheral\n");
+ break;
+ case OTG_STATE_A_SUSPEND:
+ if (clr & OTG1_DP_PULLUP)
+ break;
+ isp->phy.otg->state = OTG_STATE_A_PERIPHERAL;
+ pr_debug(" --> a_peripheral\n");
+ break;
+ default:
+ break;
+ }
+ l = omap_readl(OTG_CTRL);
+ l |= OTG_PULLUP;
+ omap_writel(l, OTG_CTRL);
+ }
+
+ check_state(isp, __func__);
+ dump_regs(isp, "otg->isp1301");
+}
+
+static irqreturn_t omap_otg_irq(int irq, void *_isp)
+{
+ u16 otg_irq = omap_readw(OTG_IRQ_SRC);
+ u32 otg_ctrl;
+ int ret = IRQ_NONE;
+ struct isp1301 *isp = _isp;
+ struct usb_otg *otg = isp->phy.otg;
+
+ /* update ISP1301 transceiver from OTG controller */
+ if (otg_irq & OPRT_CHG) {
+ omap_writew(OPRT_CHG, OTG_IRQ_SRC);
+ isp1301_defer_work(isp, WORK_UPDATE_ISP);
+ ret = IRQ_HANDLED;
+
+ /* SRP to become b_peripheral failed */
+ } else if (otg_irq & B_SRP_TMROUT) {
+ pr_debug("otg: B_SRP_TIMEOUT, %06x\n", omap_readl(OTG_CTRL));
+ notresponding(isp);
+
+ /* gadget drivers that care should monitor all kinds of
+ * remote wakeup (SRP, normal) using their own timer
+ * to give "check cable and A-device" messages.
+ */
+ if (isp->phy.otg->state == OTG_STATE_B_SRP_INIT)
+ b_idle(isp, "srp_timeout");
+
+ omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC);
+ ret = IRQ_HANDLED;
+
+ /* HNP to become b_host failed */
+ } else if (otg_irq & B_HNP_FAIL) {
+ pr_debug("otg: %s B_HNP_FAIL, %06x\n",
+ state_name(isp), omap_readl(OTG_CTRL));
+ notresponding(isp);
+
+ otg_ctrl = omap_readl(OTG_CTRL);
+ otg_ctrl |= OTG_BUSDROP;
+ otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
+ omap_writel(otg_ctrl, OTG_CTRL);
+
+ /* subset of b_peripheral()... */
+ isp->phy.otg->state = OTG_STATE_B_PERIPHERAL;
+ pr_debug(" --> b_peripheral\n");
+
+ omap_writew(B_HNP_FAIL, OTG_IRQ_SRC);
+ ret = IRQ_HANDLED;
+
+ /* detect SRP from B-device ... */
+ } else if (otg_irq & A_SRP_DETECT) {
+ pr_debug("otg: %s SRP_DETECT, %06x\n",
+ state_name(isp), omap_readl(OTG_CTRL));
+
+ isp1301_defer_work(isp, WORK_UPDATE_OTG);
+ switch (isp->phy.otg->state) {
+ case OTG_STATE_A_IDLE:
+ if (!otg->host)
+ break;
+ isp1301_defer_work(isp, WORK_HOST_RESUME);
+ otg_ctrl = omap_readl(OTG_CTRL);
+ otg_ctrl |= OTG_A_BUSREQ;
+ otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ)
+ & ~OTG_XCEIV_INPUTS
+ & OTG_CTRL_MASK;
+ omap_writel(otg_ctrl, OTG_CTRL);
+ break;
+ default:
+ break;
+ }
+
+ omap_writew(A_SRP_DETECT, OTG_IRQ_SRC);
+ ret = IRQ_HANDLED;
+
+ /* timer expired: T(a_wait_bcon) and maybe T(a_wait_vrise)
+ * we don't track them separately
+ */
+ } else if (otg_irq & A_REQ_TMROUT) {
+ otg_ctrl = omap_readl(OTG_CTRL);
+ pr_info("otg: BCON_TMOUT from %s, %06x\n",
+ state_name(isp), otg_ctrl);
+ notresponding(isp);
+
+ otg_ctrl |= OTG_BUSDROP;
+ otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
+ omap_writel(otg_ctrl, OTG_CTRL);
+ isp->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
+
+ omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC);
+ ret = IRQ_HANDLED;
+
+ /* A-supplied voltage fell too low; overcurrent */
+ } else if (otg_irq & A_VBUS_ERR) {
+ otg_ctrl = omap_readl(OTG_CTRL);
+ printk(KERN_ERR "otg: %s, VBUS_ERR %04x ctrl %06x\n",
+ state_name(isp), otg_irq, otg_ctrl);
+
+ otg_ctrl |= OTG_BUSDROP;
+ otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
+ omap_writel(otg_ctrl, OTG_CTRL);
+ isp->phy.otg->state = OTG_STATE_A_VBUS_ERR;
+
+ omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
+ ret = IRQ_HANDLED;
+
+ /* switch driver; the transceiver code activates it,
+ * ungating the udc clock or resuming OHCI.
+ */
+ } else if (otg_irq & DRIVER_SWITCH) {
+ int kick = 0;
+
+ otg_ctrl = omap_readl(OTG_CTRL);
+ printk(KERN_NOTICE "otg: %s, SWITCH to %s, ctrl %06x\n",
+ state_name(isp),
+ (otg_ctrl & OTG_DRIVER_SEL)
+ ? "gadget" : "host",
+ otg_ctrl);
+ isp1301_defer_work(isp, WORK_UPDATE_ISP);
+
+ /* role is peripheral */
+ if (otg_ctrl & OTG_DRIVER_SEL) {
+ switch (isp->phy.otg->state) {
+ case OTG_STATE_A_IDLE:
+ b_idle(isp, __func__);
+ break;
+ default:
+ break;
+ }
+ isp1301_defer_work(isp, WORK_UPDATE_ISP);
+
+ /* role is host */
+ } else {
+ if (!(otg_ctrl & OTG_ID)) {
+ otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
+ omap_writel(otg_ctrl | OTG_A_BUSREQ, OTG_CTRL);
+ }
+
+ if (otg->host) {
+ switch (isp->phy.otg->state) {
+ case OTG_STATE_B_WAIT_ACON:
+ isp->phy.otg->state = OTG_STATE_B_HOST;
+ pr_debug(" --> b_host\n");
+ kick = 1;
+ break;
+ case OTG_STATE_A_WAIT_BCON:
+ isp->phy.otg->state = OTG_STATE_A_HOST;
+ pr_debug(" --> a_host\n");
+ break;
+ case OTG_STATE_A_PERIPHERAL:
+ isp->phy.otg->state = OTG_STATE_A_WAIT_BCON;
+ pr_debug(" --> a_wait_bcon\n");
+ break;
+ default:
+ break;
+ }
+ isp1301_defer_work(isp, WORK_HOST_RESUME);
+ }
+ }
+
+ omap_writew(DRIVER_SWITCH, OTG_IRQ_SRC);
+ ret = IRQ_HANDLED;
+
+ if (kick)
+ usb_bus_start_enum(otg->host, otg->host->otg_port);
+ }
+
+ check_state(isp, __func__);
+ return ret;
+}
+
+static struct platform_device *otg_dev;
+
+static int isp1301_otg_init(struct isp1301 *isp)
+{
+ u32 l;
+
+ if (!otg_dev)
+ return -ENODEV;
+
+ dump_regs(isp, __func__);
+ /* some of these values are board-specific... */
+ l = omap_readl(OTG_SYSCON_2);
+ l |= OTG_EN
+ /* for B-device: */
+ | SRP_GPDATA /* 9msec Bdev D+ pulse */
+ | SRP_GPDVBUS /* discharge after VBUS pulse */
+ // | (3 << 24) /* 2msec VBUS pulse */
+ /* for A-device: */
+ | (0 << 20) /* 200ms nominal A_WAIT_VRISE timer */
+ | SRP_DPW /* detect 167+ns SRP pulses */
+ | SRP_DATA | SRP_VBUS /* accept both kinds of SRP pulse */
+ ;
+ omap_writel(l, OTG_SYSCON_2);
+
+ update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE));
+ update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS));
+
+ check_state(isp, __func__);
+ pr_debug("otg: %s, %s %06x\n",
+ state_name(isp), __func__, omap_readl(OTG_CTRL));
+
+ omap_writew(DRIVER_SWITCH | OPRT_CHG
+ | B_SRP_TMROUT | B_HNP_FAIL
+ | A_VBUS_ERR | A_SRP_DETECT | A_REQ_TMROUT, OTG_IRQ_EN);
+
+ l = omap_readl(OTG_SYSCON_2);
+ l |= OTG_EN;
+ omap_writel(l, OTG_SYSCON_2);
+
+ return 0;
+}
+
+static int otg_probe(struct platform_device *dev)
+{
+ // struct omap_usb_config *config = dev->platform_data;
+
+ otg_dev = dev;
+ return 0;
+}
+
+static int otg_remove(struct platform_device *dev)
+{
+ otg_dev = NULL;
+ return 0;
+}
+
+static struct platform_driver omap_otg_driver = {
+ .probe = otg_probe,
+ .remove = otg_remove,
+ .driver = {
+ .name = "omap_otg",
+ },
+};
+
+static int otg_bind(struct isp1301 *isp)
+{
+ int status;
+
+ if (otg_dev)
+ return -EBUSY;
+
+ status = platform_driver_register(&omap_otg_driver);
+ if (status < 0)
+ return status;
+
+ if (otg_dev)
+ status = request_irq(otg_dev->resource[1].start, omap_otg_irq,
+ 0, DRIVER_NAME, isp);
+ else
+ status = -ENODEV;
+
+ if (status < 0)
+ platform_driver_unregister(&omap_otg_driver);
+ return status;
+}
+
+static void otg_unbind(struct isp1301 *isp)
+{
+ if (!otg_dev)
+ return;
+ free_irq(otg_dev->resource[1].start, isp);
+}
+
+#else
+
+/* OTG controller isn't clocked */
+
+#endif /* CONFIG_USB_OTG */
+
+/*-------------------------------------------------------------------------*/
+
+static void b_peripheral(struct isp1301 *isp)
+{
+ u32 l;
+
+ l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
+ omap_writel(l, OTG_CTRL);
+
+ usb_gadget_vbus_connect(isp->phy.otg->gadget);
+
+#ifdef CONFIG_USB_OTG
+ enable_vbus_draw(isp, 8);
+ otg_update_isp(isp);
+#else
+ enable_vbus_draw(isp, 100);
+ /* UDC driver just set OTG_BSESSVLD */
+ isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLUP);
+ isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLDOWN);
+ isp->phy.otg->state = OTG_STATE_B_PERIPHERAL;
+ pr_debug(" --> b_peripheral\n");
+ dump_regs(isp, "2periph");
+#endif
+}
+
+static void isp_update_otg(struct isp1301 *isp, u8 stat)
+{
+ struct usb_otg *otg = isp->phy.otg;
+ u8 isp_stat, isp_bstat;
+ enum usb_otg_state state = isp->phy.otg->state;
+
+ if (stat & INTR_BDIS_ACON)
+ pr_debug("OTG: BDIS_ACON, %s\n", state_name(isp));
+
+ /* start certain state transitions right away */
+ isp_stat = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE);
+ if (isp_stat & INTR_ID_GND) {
+ if (otg->default_a) {
+ switch (state) {
+ case OTG_STATE_B_IDLE:
+ a_idle(isp, "idle");
+ /* FALLTHROUGH */
+ case OTG_STATE_A_IDLE:
+ enable_vbus_source(isp);
+ /* FALLTHROUGH */
+ case OTG_STATE_A_WAIT_VRISE:
+ /* we skip over OTG_STATE_A_WAIT_BCON, since
+ * the HC will transition to A_HOST (or
+ * A_SUSPEND!) without our noticing except
+ * when HNP is used.
+ */
+ if (isp_stat & INTR_VBUS_VLD)
+ isp->phy.otg->state = OTG_STATE_A_HOST;
+ break;
+ case OTG_STATE_A_WAIT_VFALL:
+ if (!(isp_stat & INTR_SESS_VLD))
+ a_idle(isp, "vfell");
+ break;
+ default:
+ if (!(isp_stat & INTR_VBUS_VLD))
+ isp->phy.otg->state = OTG_STATE_A_VBUS_ERR;
+ break;
+ }
+ isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
+ } else {
+ switch (state) {
+ case OTG_STATE_B_PERIPHERAL:
+ case OTG_STATE_B_HOST:
+ case OTG_STATE_B_WAIT_ACON:
+ usb_gadget_vbus_disconnect(otg->gadget);
+ break;
+ default:
+ break;
+ }
+ if (state != OTG_STATE_A_IDLE)
+ a_idle(isp, "id");
+ if (otg->host && state == OTG_STATE_A_IDLE)
+ isp1301_defer_work(isp, WORK_HOST_RESUME);
+ isp_bstat = 0;
+ }
+ } else {
+ u32 l;
+
+ /* if user unplugged mini-A end of cable,
+ * don't bypass A_WAIT_VFALL.
+ */
+ if (otg->default_a) {
+ switch (state) {
+ default:
+ isp->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
+ break;
+ case OTG_STATE_A_WAIT_VFALL:
+ state = OTG_STATE_A_IDLE;
+ /* hub_wq may take a while to notice and
+ * handle this disconnect, so don't go
+ * to B_IDLE quite yet.
+ */
+ break;
+ case OTG_STATE_A_IDLE:
+ host_suspend(isp);
+ isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1,
+ MC1_BDIS_ACON_EN);
+ isp->phy.otg->state = OTG_STATE_B_IDLE;
+ l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
+ l &= ~OTG_CTRL_BITS;
+ omap_writel(l, OTG_CTRL);
+ break;
+ case OTG_STATE_B_IDLE:
+ break;
+ }
+ }
+ isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
+
+ switch (isp->phy.otg->state) {
+ case OTG_STATE_B_PERIPHERAL:
+ case OTG_STATE_B_WAIT_ACON:
+ case OTG_STATE_B_HOST:
+ if (likely(isp_bstat & OTG_B_SESS_VLD))
+ break;
+ enable_vbus_draw(isp, 0);
+#ifndef CONFIG_USB_OTG
+ /* UDC driver will clear OTG_BSESSVLD */
+ isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1,
+ OTG1_DP_PULLDOWN);
+ isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1,
+ OTG1_DP_PULLUP);
+ dump_regs(isp, __func__);
+#endif
+ /* FALLTHROUGH */
+ case OTG_STATE_B_SRP_INIT:
+ b_idle(isp, __func__);
+ l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
+ omap_writel(l, OTG_CTRL);
+ /* FALLTHROUGH */
+ case OTG_STATE_B_IDLE:
+ if (otg->gadget && (isp_bstat & OTG_B_SESS_VLD)) {
+#ifdef CONFIG_USB_OTG
+ update_otg1(isp, isp_stat);
+ update_otg2(isp, isp_bstat);
+#endif
+ b_peripheral(isp);
+ } else if (!(isp_stat & (INTR_VBUS_VLD|INTR_SESS_VLD)))
+ isp_bstat |= OTG_B_SESS_END;
+ break;
+ case OTG_STATE_A_WAIT_VFALL:
+ break;
+ default:
+ pr_debug("otg: unsupported b-device %s\n",
+ state_name(isp));
+ break;
+ }
+ }
+
+ if (state != isp->phy.otg->state)
+ pr_debug(" isp, %s -> %s\n",
+ usb_otg_state_string(state), state_name(isp));
+
+#ifdef CONFIG_USB_OTG
+ /* update the OTG controller state to match the isp1301; may
+ * trigger OPRT_CHG irqs for changes going to the isp1301.
+ */
+ update_otg1(isp, isp_stat);
+ update_otg2(isp, isp_bstat);
+ check_state(isp, __func__);
+#endif
+
+ dump_regs(isp, "isp1301->otg");
+}
+
+/*-------------------------------------------------------------------------*/
+
+static u8 isp1301_clear_latch(struct isp1301 *isp)
+{
+ u8 latch = isp1301_get_u8(isp, ISP1301_INTERRUPT_LATCH);
+ isp1301_clear_bits(isp, ISP1301_INTERRUPT_LATCH, latch);
+ return latch;
+}
+
+static void
+isp1301_work(struct work_struct *work)
+{
+ struct isp1301 *isp = container_of(work, struct isp1301, work);
+ int stop;
+
+ /* implicit lock: we're the only task using this device */
+ isp->working = 1;
+ do {
+ stop = test_bit(WORK_STOP, &isp->todo);
+
+#ifdef CONFIG_USB_OTG
+ /* transfer state from otg engine to isp1301 */
+ if (test_and_clear_bit(WORK_UPDATE_ISP, &isp->todo)) {
+ otg_update_isp(isp);
+ put_device(&isp->client->dev);
+ }
+#endif
+ /* transfer state from isp1301 to otg engine */
+ if (test_and_clear_bit(WORK_UPDATE_OTG, &isp->todo)) {
+ u8 stat = isp1301_clear_latch(isp);
+
+ isp_update_otg(isp, stat);
+ put_device(&isp->client->dev);
+ }
+
+ if (test_and_clear_bit(WORK_HOST_RESUME, &isp->todo)) {
+ u32 otg_ctrl;
+
+ /*
+ * skip A_WAIT_VRISE; hc transitions invisibly
+ * skip A_WAIT_BCON; same.
+ */
+ switch (isp->phy.otg->state) {
+ case OTG_STATE_A_WAIT_BCON:
+ case OTG_STATE_A_WAIT_VRISE:
+ isp->phy.otg->state = OTG_STATE_A_HOST;
+ pr_debug(" --> a_host\n");
+ otg_ctrl = omap_readl(OTG_CTRL);
+ otg_ctrl |= OTG_A_BUSREQ;
+ otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ)
+ & OTG_CTRL_MASK;
+ omap_writel(otg_ctrl, OTG_CTRL);
+ break;
+ case OTG_STATE_B_WAIT_ACON:
+ isp->phy.otg->state = OTG_STATE_B_HOST;
+ pr_debug(" --> b_host (acon)\n");
+ break;
+ case OTG_STATE_B_HOST:
+ case OTG_STATE_B_IDLE:
+ case OTG_STATE_A_IDLE:
+ break;
+ default:
+ pr_debug(" host resume in %s\n",
+ state_name(isp));
+ }
+ host_resume(isp);
+ // mdelay(10);
+ put_device(&isp->client->dev);
+ }
+
+ if (test_and_clear_bit(WORK_TIMER, &isp->todo)) {
+#ifdef VERBOSE
+ dump_regs(isp, "timer");
+ if (!stop)
+ mod_timer(&isp->timer, jiffies + TIMER_JIFFIES);
+#endif
+ put_device(&isp->client->dev);
+ }
+
+ if (isp->todo)
+ dev_vdbg(&isp->client->dev,
+ "work done, todo = 0x%lx\n",
+ isp->todo);
+ if (stop) {
+ dev_dbg(&isp->client->dev, "stop\n");
+ break;
+ }
+ } while (isp->todo);
+ isp->working = 0;
+}
+
+static irqreturn_t isp1301_irq(int irq, void *isp)
+{
+ isp1301_defer_work(isp, WORK_UPDATE_OTG);
+ return IRQ_HANDLED;
+}
+
+static void isp1301_timer(unsigned long _isp)
+{
+ isp1301_defer_work((void *)_isp, WORK_TIMER);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void isp1301_release(struct device *dev)
+{
+ struct isp1301 *isp;
+
+ isp = dev_get_drvdata(dev);
+
+ /* FIXME -- not with a "new style" driver, it doesn't!! */
+
+ /* ugly -- i2c hijacks our memory hook to wait_for_completion() */
+ if (isp->i2c_release)
+ isp->i2c_release(dev);
+ kfree(isp->phy.otg);
+ kfree (isp);
+}
+
+static struct isp1301 *the_transceiver;
+
+static int isp1301_remove(struct i2c_client *i2c)
+{
+ struct isp1301 *isp;
+
+ isp = i2c_get_clientdata(i2c);
+
+ isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0);
+ isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0);
+ free_irq(i2c->irq, isp);
+#ifdef CONFIG_USB_OTG
+ otg_unbind(isp);
+#endif
+ if (machine_is_omap_h2())
+ gpio_free(2);
+
+ isp->timer.data = 0;
+ set_bit(WORK_STOP, &isp->todo);
+ del_timer_sync(&isp->timer);
+ flush_work(&isp->work);
+
+ put_device(&i2c->dev);
+ the_transceiver = NULL;
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* NOTE: three modes are possible here, only one of which
+ * will be standards-conformant on any given system:
+ *
+ * - OTG mode (dual-role), required if there's a Mini-AB connector
+ * - HOST mode, for when there's one or more A (host) connectors
+ * - DEVICE mode, for when there's a B/Mini-B (device) connector
+ *
+ * As a rule, you won't have an isp1301 chip unless it's there to
+ * support the OTG mode. Other modes help testing USB controllers
+ * in isolation from (full) OTG support, or maybe so later board
+ * revisions can help to support those feature.
+ */
+
+#ifdef CONFIG_USB_OTG
+
+static int isp1301_otg_enable(struct isp1301 *isp)
+{
+ power_up(isp);
+ isp1301_otg_init(isp);
+
+ /* NOTE: since we don't change this, this provides
+ * a few more interrupts than are strictly needed.
+ */
+ isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
+ INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
+ isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
+ INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND);
+
+ dev_info(&isp->client->dev, "ready for dual-role USB ...\n");
+
+ return 0;
+}
+
+#endif
+
+/* add or disable the host device+driver */
+static int
+isp1301_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ struct isp1301 *isp = container_of(otg->usb_phy, struct isp1301, phy);
+
+ if (isp != the_transceiver)
+ return -ENODEV;
+
+ if (!host) {
+ omap_writew(0, OTG_IRQ_EN);
+ power_down(isp);
+ otg->host = NULL;
+ return 0;
+ }
+
+#ifdef CONFIG_USB_OTG
+ otg->host = host;
+ dev_dbg(&isp->client->dev, "registered host\n");
+ host_suspend(isp);
+ if (otg->gadget)
+ return isp1301_otg_enable(isp);
+ return 0;
+
+#elif !IS_ENABLED(CONFIG_USB_OMAP)
+ // FIXME update its refcount
+ otg->host = host;
+
+ power_up(isp);
+
+ if (machine_is_omap_h2())
+ isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
+
+ dev_info(&isp->client->dev, "A-Host sessions ok\n");
+ isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
+ INTR_ID_GND);
+ isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
+ INTR_ID_GND);
+
+ /* If this has a Mini-AB connector, this mode is highly
+ * nonstandard ... but can be handy for testing, especially with
+ * the Mini-A end of an OTG cable. (Or something nonstandard
+ * like MiniB-to-StandardB, maybe built with a gender mender.)
+ */
+ isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_VBUS_DRV);
+
+ dump_regs(isp, __func__);
+
+ return 0;
+
+#else
+ dev_dbg(&isp->client->dev, "host sessions not allowed\n");
+ return -EINVAL;
+#endif
+
+}
+
+static int
+isp1301_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
+{
+ struct isp1301 *isp = container_of(otg->usb_phy, struct isp1301, phy);
+
+ if (isp != the_transceiver)
+ return -ENODEV;
+
+ if (!gadget) {
+ omap_writew(0, OTG_IRQ_EN);
+ if (!otg->default_a)
+ enable_vbus_draw(isp, 0);
+ usb_gadget_vbus_disconnect(otg->gadget);
+ otg->gadget = NULL;
+ power_down(isp);
+ return 0;
+ }
+
+#ifdef CONFIG_USB_OTG
+ otg->gadget = gadget;
+ dev_dbg(&isp->client->dev, "registered gadget\n");
+ /* gadget driver may be suspended until vbus_connect () */
+ if (otg->host)
+ return isp1301_otg_enable(isp);
+ return 0;
+
+#elif !defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OHCI_HCD_MODULE)
+ otg->gadget = gadget;
+ // FIXME update its refcount
+
+ {
+ u32 l;
+
+ l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
+ l &= ~(OTG_XCEIV_OUTPUTS|OTG_CTRL_BITS);
+ l |= OTG_ID;
+ omap_writel(l, OTG_CTRL);
+ }
+
+ power_up(isp);
+ isp->phy.otg->state = OTG_STATE_B_IDLE;
+
+ if (machine_is_omap_h2() || machine_is_omap_h3())
+ isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
+
+ isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING,
+ INTR_SESS_VLD);
+ isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING,
+ INTR_VBUS_VLD);
+ dev_info(&isp->client->dev, "B-Peripheral sessions ok\n");
+ dump_regs(isp, __func__);
+
+ /* If this has a Mini-AB connector, this mode is highly
+ * nonstandard ... but can be handy for testing, so long
+ * as you don't plug a Mini-A cable into the jack.
+ */
+ if (isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE) & INTR_VBUS_VLD)
+ b_peripheral(isp);
+
+ return 0;
+
+#else
+ dev_dbg(&isp->client->dev, "peripheral sessions not allowed\n");
+ return -EINVAL;
+#endif
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static int
+isp1301_set_power(struct usb_phy *dev, unsigned mA)
+{
+ if (!the_transceiver)
+ return -ENODEV;
+ if (dev->otg->state == OTG_STATE_B_PERIPHERAL)
+ enable_vbus_draw(the_transceiver, mA);
+ return 0;
+}
+
+static int
+isp1301_start_srp(struct usb_otg *otg)
+{
+ struct isp1301 *isp = container_of(otg->usb_phy, struct isp1301, phy);
+ u32 otg_ctrl;
+
+ if (isp != the_transceiver || isp->phy.otg->state != OTG_STATE_B_IDLE)
+ return -ENODEV;
+
+ otg_ctrl = omap_readl(OTG_CTRL);
+ if (!(otg_ctrl & OTG_BSESSEND))
+ return -EINVAL;
+
+ otg_ctrl |= OTG_B_BUSREQ;
+ otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK;
+ omap_writel(otg_ctrl, OTG_CTRL);
+ isp->phy.otg->state = OTG_STATE_B_SRP_INIT;
+
+ pr_debug("otg: SRP, %s ... %06x\n", state_name(isp),
+ omap_readl(OTG_CTRL));
+#ifdef CONFIG_USB_OTG
+ check_state(isp, __func__);
+#endif
+ return 0;
+}
+
+static int
+isp1301_start_hnp(struct usb_otg *otg)
+{
+#ifdef CONFIG_USB_OTG
+ struct isp1301 *isp = container_of(otg->usb_phy, struct isp1301, phy);
+ u32 l;
+
+ if (isp != the_transceiver)
+ return -ENODEV;
+ if (otg->default_a && (otg->host == NULL || !otg->host->b_hnp_enable))
+ return -ENOTCONN;
+ if (!otg->default_a && (otg->gadget == NULL
+ || !otg->gadget->b_hnp_enable))
+ return -ENOTCONN;
+
+ /* We want hardware to manage most HNP protocol timings.
+ * So do this part as early as possible...
+ */
+ switch (isp->phy.otg->state) {
+ case OTG_STATE_B_HOST:
+ isp->phy.otg->state = OTG_STATE_B_PERIPHERAL;
+ /* caller will suspend next */
+ break;
+ case OTG_STATE_A_HOST:
+#if 0
+ /* autoconnect mode avoids irq latency bugs */
+ isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1,
+ MC1_BDIS_ACON_EN);
+#endif
+ /* caller must suspend then clear A_BUSREQ */
+ usb_gadget_vbus_connect(otg->gadget);
+ l = omap_readl(OTG_CTRL);
+ l |= OTG_A_SETB_HNPEN;
+ omap_writel(l, OTG_CTRL);
+
+ break;
+ case OTG_STATE_A_PERIPHERAL:
+ /* initiated by B-Host suspend */
+ break;
+ default:
+ return -EILSEQ;
+ }
+ pr_debug("otg: HNP %s, %06x ...\n",
+ state_name(isp), omap_readl(OTG_CTRL));
+ check_state(isp, __func__);
+ return 0;
+#else
+ /* srp-only */
+ return -EINVAL;
+#endif
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int
+isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
+{
+ int status;
+ struct isp1301 *isp;
+
+ if (the_transceiver)
+ return 0;
+
+ isp = kzalloc(sizeof *isp, GFP_KERNEL);
+ if (!isp)
+ return 0;
+
+ isp->phy.otg = kzalloc(sizeof *isp->phy.otg, GFP_KERNEL);
+ if (!isp->phy.otg) {
+ kfree(isp);
+ return 0;
+ }
+
+ INIT_WORK(&isp->work, isp1301_work);
+ init_timer(&isp->timer);
+ isp->timer.function = isp1301_timer;
+ isp->timer.data = (unsigned long) isp;
+
+ i2c_set_clientdata(i2c, isp);
+ isp->client = i2c;
+
+ /* verify the chip (shouldn't be necessary) */
+ status = isp1301_get_u16(isp, ISP1301_VENDOR_ID);
+ if (status != I2C_VENDOR_ID_PHILIPS) {
+ dev_dbg(&i2c->dev, "not philips id: %d\n", status);
+ goto fail;
+ }
+ status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID);
+ if (status != I2C_PRODUCT_ID_PHILIPS_1301) {
+ dev_dbg(&i2c->dev, "not isp1301, %d\n", status);
+ goto fail;
+ }
+ isp->i2c_release = i2c->dev.release;
+ i2c->dev.release = isp1301_release;
+
+ /* initial development used chiprev 2.00 */
+ status = i2c_smbus_read_word_data(i2c, ISP1301_BCD_DEVICE);
+ dev_info(&i2c->dev, "chiprev %x.%02x, driver " DRIVER_VERSION "\n",
+ status >> 8, status & 0xff);
+
+ /* make like power-on reset */
+ isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_MASK);
+
+ isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_BI_DI);
+ isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, ~MC2_BI_DI);
+
+ isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1,
+ OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN);
+ isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1,
+ ~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
+
+ isp1301_clear_bits(isp, ISP1301_INTERRUPT_LATCH, ~0);
+ isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0);
+ isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0);
+
+#ifdef CONFIG_USB_OTG
+ status = otg_bind(isp);
+ if (status < 0) {
+ dev_dbg(&i2c->dev, "can't bind OTG\n");
+ goto fail;
+ }
+#endif
+
+ if (machine_is_omap_h2()) {
+ /* full speed signaling by default */
+ isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1,
+ MC1_SPEED);
+ isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2,
+ MC2_SPD_SUSP_CTRL);
+
+ /* IRQ wired at M14 */
+ omap_cfg_reg(M14_1510_GPIO2);
+ if (gpio_request(2, "isp1301") == 0)
+ gpio_direction_input(2);
+ isp->irq_type = IRQF_TRIGGER_FALLING;
+ }
+
+ status = request_irq(i2c->irq, isp1301_irq,
+ isp->irq_type, DRIVER_NAME, isp);
+ if (status < 0) {
+ dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n",
+ i2c->irq, status);
+ goto fail;
+ }
+
+ isp->phy.dev = &i2c->dev;
+ isp->phy.label = DRIVER_NAME;
+ isp->phy.set_power = isp1301_set_power,
+
+ isp->phy.otg->usb_phy = &isp->phy;
+ isp->phy.otg->set_host = isp1301_set_host,
+ isp->phy.otg->set_peripheral = isp1301_set_peripheral,
+ isp->phy.otg->start_srp = isp1301_start_srp,
+ isp->phy.otg->start_hnp = isp1301_start_hnp,
+
+ enable_vbus_draw(isp, 0);
+ power_down(isp);
+ the_transceiver = isp;
+
+#ifdef CONFIG_USB_OTG
+ update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE));
+ update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS));
+#endif
+
+ dump_regs(isp, __func__);
+
+#ifdef VERBOSE
+ mod_timer(&isp->timer, jiffies + TIMER_JIFFIES);
+ dev_dbg(&i2c->dev, "scheduled timer, %d min\n", TIMER_MINUTES);
+#endif
+
+ status = usb_add_phy(&isp->phy, USB_PHY_TYPE_USB2);
+ if (status < 0)
+ dev_err(&i2c->dev, "can't register transceiver, %d\n",
+ status);
+
+ return 0;
+
+fail:
+ kfree(isp->phy.otg);
+ kfree(isp);
+ return -ENODEV;
+}
+
+static const struct i2c_device_id isp1301_id[] = {
+ { "isp1301_omap", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, isp1301_id);
+
+static struct i2c_driver isp1301_driver = {
+ .driver = {
+ .name = "isp1301_omap",
+ },
+ .probe = isp1301_probe,
+ .remove = isp1301_remove,
+ .id_table = isp1301_id,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init isp_init(void)
+{
+ return i2c_add_driver(&isp1301_driver);
+}
+subsys_initcall(isp_init);
+
+static void __exit isp_exit(void)
+{
+ if (the_transceiver)
+ usb_remove_phy(&the_transceiver->phy);
+ i2c_del_driver(&isp1301_driver);
+}
+module_exit(isp_exit);
+
diff --git a/kernel/drivers/usb/phy/phy-isp1301.c b/kernel/drivers/usb/phy/phy-isp1301.c
new file mode 100644
index 000000000..8a55b37d1
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-isp1301.c
@@ -0,0 +1,163 @@
+/*
+ * NXP ISP1301 USB transceiver driver
+ *
+ * Copyright (C) 2012 Roland Stigge
+ *
+ * Author: Roland Stigge <stigge@antcom.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+#include <linux/usb/phy.h>
+#include <linux/usb/isp1301.h>
+
+#define DRV_NAME "isp1301"
+
+struct isp1301 {
+ struct usb_phy phy;
+ struct mutex mutex;
+
+ struct i2c_client *client;
+};
+
+#define phy_to_isp(p) (container_of((p), struct isp1301, phy))
+
+static const struct i2c_device_id isp1301_id[] = {
+ { "isp1301", 0 },
+ { }
+};
+
+static struct i2c_client *isp1301_i2c_client;
+
+static int __isp1301_write(struct isp1301 *isp, u8 reg, u8 value, u8 clear)
+{
+ return i2c_smbus_write_byte_data(isp->client, reg | clear, value);
+}
+
+static int isp1301_write(struct isp1301 *isp, u8 reg, u8 value)
+{
+ return __isp1301_write(isp, reg, value, 0);
+}
+
+static int isp1301_clear(struct isp1301 *isp, u8 reg, u8 value)
+{
+ return __isp1301_write(isp, reg, value, ISP1301_I2C_REG_CLEAR_ADDR);
+}
+
+static int isp1301_phy_init(struct usb_phy *phy)
+{
+ struct isp1301 *isp = phy_to_isp(phy);
+
+ /* Disable transparent UART mode first */
+ isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_UART_EN);
+ isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_1, ~MC1_SPEED_REG);
+ isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
+ isp1301_clear(isp, ISP1301_I2C_MODE_CONTROL_2, ~0);
+ isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_2, (MC2_BI_DI | MC2_PSW_EN
+ | MC2_SPD_SUSP_CTRL));
+
+ isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, ~0);
+ isp1301_write(isp, ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
+ isp1301_write(isp, ISP1301_I2C_OTG_CONTROL_1, (OTG1_DM_PULLDOWN
+ | OTG1_DP_PULLDOWN));
+ isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, (OTG1_DM_PULLUP
+ | OTG1_DP_PULLUP));
+
+ /* mask all interrupts */
+ isp1301_clear(isp, ISP1301_I2C_INTERRUPT_LATCH, ~0);
+ isp1301_clear(isp, ISP1301_I2C_INTERRUPT_FALLING, ~0);
+ isp1301_clear(isp, ISP1301_I2C_INTERRUPT_RISING, ~0);
+
+ return 0;
+}
+
+static int isp1301_phy_set_vbus(struct usb_phy *phy, int on)
+{
+ struct isp1301 *isp = phy_to_isp(phy);
+
+ if (on)
+ isp1301_write(isp, ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DRV);
+ else
+ isp1301_clear(isp, ISP1301_I2C_OTG_CONTROL_1, OTG1_VBUS_DRV);
+
+ return 0;
+}
+
+static int isp1301_probe(struct i2c_client *client,
+ const struct i2c_device_id *i2c_id)
+{
+ struct isp1301 *isp;
+ struct usb_phy *phy;
+
+ isp = devm_kzalloc(&client->dev, sizeof(*isp), GFP_KERNEL);
+ if (!isp)
+ return -ENOMEM;
+
+ isp->client = client;
+ mutex_init(&isp->mutex);
+
+ phy = &isp->phy;
+ phy->dev = &client->dev;
+ phy->label = DRV_NAME;
+ phy->init = isp1301_phy_init;
+ phy->set_vbus = isp1301_phy_set_vbus;
+ phy->type = USB_PHY_TYPE_USB2;
+
+ i2c_set_clientdata(client, isp);
+ usb_add_phy_dev(phy);
+
+ isp1301_i2c_client = client;
+
+ return 0;
+}
+
+static int isp1301_remove(struct i2c_client *client)
+{
+ struct isp1301 *isp = i2c_get_clientdata(client);
+
+ usb_remove_phy(&isp->phy);
+ isp1301_i2c_client = NULL;
+
+ return 0;
+}
+
+static struct i2c_driver isp1301_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ },
+ .probe = isp1301_probe,
+ .remove = isp1301_remove,
+ .id_table = isp1301_id,
+};
+
+module_i2c_driver(isp1301_driver);
+
+static int match(struct device *dev, void *data)
+{
+ struct device_node *node = (struct device_node *)data;
+ return (dev->of_node == node) &&
+ (dev->driver == &isp1301_driver.driver);
+}
+
+struct i2c_client *isp1301_get_client(struct device_node *node)
+{
+ if (node) { /* reference of ISP1301 I2C node via DT */
+ struct device *dev = bus_find_device(&i2c_bus_type, NULL,
+ node, match);
+ if (!dev)
+ return NULL;
+ return to_i2c_client(dev);
+ } else { /* non-DT: only one ISP1301 chip supported */
+ return isp1301_i2c_client;
+ }
+}
+EXPORT_SYMBOL_GPL(isp1301_get_client);
+
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("NXP ISP1301 USB transceiver driver");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/usb/phy/phy-keystone.c b/kernel/drivers/usb/phy/phy-keystone.c
new file mode 100644
index 000000000..e0556f783
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-keystone.c
@@ -0,0 +1,135 @@
+/*
+ * phy-keystone - USB PHY, talking to dwc3 controller in Keystone.
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: WingMan Kwok <w-kwok2@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb/usb_phy_generic.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+#include "phy-generic.h"
+
+/* USB PHY control register offsets */
+#define USB_PHY_CTL_UTMI 0x0000
+#define USB_PHY_CTL_PIPE 0x0004
+#define USB_PHY_CTL_PARAM_1 0x0008
+#define USB_PHY_CTL_PARAM_2 0x000c
+#define USB_PHY_CTL_CLOCK 0x0010
+#define USB_PHY_CTL_PLL 0x0014
+
+#define PHY_REF_SSP_EN BIT(29)
+
+struct keystone_usbphy {
+ struct usb_phy_generic usb_phy_gen;
+ void __iomem *phy_ctrl;
+};
+
+static inline u32 keystone_usbphy_readl(void __iomem *base, u32 offset)
+{
+ return readl(base + offset);
+}
+
+static inline void keystone_usbphy_writel(void __iomem *base,
+ u32 offset, u32 value)
+{
+ writel(value, base + offset);
+}
+
+static int keystone_usbphy_init(struct usb_phy *phy)
+{
+ struct keystone_usbphy *k_phy = dev_get_drvdata(phy->dev);
+ u32 val;
+
+ val = keystone_usbphy_readl(k_phy->phy_ctrl, USB_PHY_CTL_CLOCK);
+ keystone_usbphy_writel(k_phy->phy_ctrl, USB_PHY_CTL_CLOCK,
+ val | PHY_REF_SSP_EN);
+ return 0;
+}
+
+static void keystone_usbphy_shutdown(struct usb_phy *phy)
+{
+ struct keystone_usbphy *k_phy = dev_get_drvdata(phy->dev);
+ u32 val;
+
+ val = keystone_usbphy_readl(k_phy->phy_ctrl, USB_PHY_CTL_CLOCK);
+ keystone_usbphy_writel(k_phy->phy_ctrl, USB_PHY_CTL_CLOCK,
+ val &= ~PHY_REF_SSP_EN);
+}
+
+static int keystone_usbphy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct keystone_usbphy *k_phy;
+ struct resource *res;
+ int ret;
+
+ k_phy = devm_kzalloc(dev, sizeof(*k_phy), GFP_KERNEL);
+ if (!k_phy)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ k_phy->phy_ctrl = devm_ioremap_resource(dev, res);
+ if (IS_ERR(k_phy->phy_ctrl))
+ return PTR_ERR(k_phy->phy_ctrl);
+
+ ret = usb_phy_gen_create_phy(dev, &k_phy->usb_phy_gen, NULL);
+ if (ret)
+ return ret;
+
+ k_phy->usb_phy_gen.phy.init = keystone_usbphy_init;
+ k_phy->usb_phy_gen.phy.shutdown = keystone_usbphy_shutdown;
+
+ platform_set_drvdata(pdev, k_phy);
+
+ ret = usb_add_phy_dev(&k_phy->usb_phy_gen.phy);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int keystone_usbphy_remove(struct platform_device *pdev)
+{
+ struct keystone_usbphy *k_phy = platform_get_drvdata(pdev);
+
+ usb_remove_phy(&k_phy->usb_phy_gen.phy);
+
+ return 0;
+}
+
+static const struct of_device_id keystone_usbphy_ids[] = {
+ { .compatible = "ti,keystone-usbphy" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, keystone_usbphy_ids);
+
+static struct platform_driver keystone_usbphy_driver = {
+ .probe = keystone_usbphy_probe,
+ .remove = keystone_usbphy_remove,
+ .driver = {
+ .name = "keystone-usbphy",
+ .of_match_table = keystone_usbphy_ids,
+ },
+};
+
+module_platform_driver(keystone_usbphy_driver);
+
+MODULE_ALIAS("platform:keystone-usbphy");
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("Keystone USB phy driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/usb/phy/phy-msm-usb.c b/kernel/drivers/usb/phy/phy-msm-usb.c
new file mode 100644
index 000000000..c9156beea
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-msm-usb.c
@@ -0,0 +1,1830 @@
+/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/uaccess.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/reset.h>
+
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/of.h>
+#include <linux/usb/ulpi.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/msm_hsusb.h>
+#include <linux/usb/msm_hsusb_hw.h>
+#include <linux/regulator/consumer.h>
+
+#define MSM_USB_BASE (motg->regs)
+#define DRIVER_NAME "msm_otg"
+
+#define ULPI_IO_TIMEOUT_USEC (10 * 1000)
+#define LINK_RESET_TIMEOUT_USEC (250 * 1000)
+
+#define USB_PHY_3P3_VOL_MIN 3050000 /* uV */
+#define USB_PHY_3P3_VOL_MAX 3300000 /* uV */
+#define USB_PHY_3P3_HPM_LOAD 50000 /* uA */
+#define USB_PHY_3P3_LPM_LOAD 4000 /* uA */
+
+#define USB_PHY_1P8_VOL_MIN 1800000 /* uV */
+#define USB_PHY_1P8_VOL_MAX 1800000 /* uV */
+#define USB_PHY_1P8_HPM_LOAD 50000 /* uA */
+#define USB_PHY_1P8_LPM_LOAD 4000 /* uA */
+
+#define USB_PHY_VDD_DIG_VOL_MIN 1000000 /* uV */
+#define USB_PHY_VDD_DIG_VOL_MAX 1320000 /* uV */
+#define USB_PHY_SUSP_DIG_VOL 500000 /* uV */
+
+enum vdd_levels {
+ VDD_LEVEL_NONE = 0,
+ VDD_LEVEL_MIN,
+ VDD_LEVEL_MAX,
+};
+
+static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init)
+{
+ int ret = 0;
+
+ if (init) {
+ ret = regulator_set_voltage(motg->vddcx,
+ motg->vdd_levels[VDD_LEVEL_MIN],
+ motg->vdd_levels[VDD_LEVEL_MAX]);
+ if (ret) {
+ dev_err(motg->phy.dev, "Cannot set vddcx voltage\n");
+ return ret;
+ }
+
+ ret = regulator_enable(motg->vddcx);
+ if (ret)
+ dev_err(motg->phy.dev, "unable to enable hsusb vddcx\n");
+ } else {
+ ret = regulator_set_voltage(motg->vddcx, 0,
+ motg->vdd_levels[VDD_LEVEL_MAX]);
+ if (ret)
+ dev_err(motg->phy.dev, "Cannot set vddcx voltage\n");
+ ret = regulator_disable(motg->vddcx);
+ if (ret)
+ dev_err(motg->phy.dev, "unable to disable hsusb vddcx\n");
+ }
+
+ return ret;
+}
+
+static int msm_hsusb_ldo_init(struct msm_otg *motg, int init)
+{
+ int rc = 0;
+
+ if (init) {
+ rc = regulator_set_voltage(motg->v3p3, USB_PHY_3P3_VOL_MIN,
+ USB_PHY_3P3_VOL_MAX);
+ if (rc) {
+ dev_err(motg->phy.dev, "Cannot set v3p3 voltage\n");
+ goto exit;
+ }
+ rc = regulator_enable(motg->v3p3);
+ if (rc) {
+ dev_err(motg->phy.dev, "unable to enable the hsusb 3p3\n");
+ goto exit;
+ }
+ rc = regulator_set_voltage(motg->v1p8, USB_PHY_1P8_VOL_MIN,
+ USB_PHY_1P8_VOL_MAX);
+ if (rc) {
+ dev_err(motg->phy.dev, "Cannot set v1p8 voltage\n");
+ goto disable_3p3;
+ }
+ rc = regulator_enable(motg->v1p8);
+ if (rc) {
+ dev_err(motg->phy.dev, "unable to enable the hsusb 1p8\n");
+ goto disable_3p3;
+ }
+
+ return 0;
+ }
+
+ regulator_disable(motg->v1p8);
+disable_3p3:
+ regulator_disable(motg->v3p3);
+exit:
+ return rc;
+}
+
+static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on)
+{
+ int ret = 0;
+
+ if (on) {
+ ret = regulator_set_load(motg->v1p8, USB_PHY_1P8_HPM_LOAD);
+ if (ret < 0) {
+ pr_err("Could not set HPM for v1p8\n");
+ return ret;
+ }
+ ret = regulator_set_load(motg->v3p3, USB_PHY_3P3_HPM_LOAD);
+ if (ret < 0) {
+ pr_err("Could not set HPM for v3p3\n");
+ regulator_set_load(motg->v1p8, USB_PHY_1P8_LPM_LOAD);
+ return ret;
+ }
+ } else {
+ ret = regulator_set_load(motg->v1p8, USB_PHY_1P8_LPM_LOAD);
+ if (ret < 0)
+ pr_err("Could not set LPM for v1p8\n");
+ ret = regulator_set_load(motg->v3p3, USB_PHY_3P3_LPM_LOAD);
+ if (ret < 0)
+ pr_err("Could not set LPM for v3p3\n");
+ }
+
+ pr_debug("reg (%s)\n", on ? "HPM" : "LPM");
+ return ret < 0 ? ret : 0;
+}
+
+static int ulpi_read(struct usb_phy *phy, u32 reg)
+{
+ struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
+ int cnt = 0;
+
+ /* initiate read operation */
+ writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg),
+ USB_ULPI_VIEWPORT);
+
+ /* wait for completion */
+ while (cnt < ULPI_IO_TIMEOUT_USEC) {
+ if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
+ break;
+ udelay(1);
+ cnt++;
+ }
+
+ if (cnt >= ULPI_IO_TIMEOUT_USEC) {
+ dev_err(phy->dev, "ulpi_read: timeout %08x\n",
+ readl(USB_ULPI_VIEWPORT));
+ return -ETIMEDOUT;
+ }
+ return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT));
+}
+
+static int ulpi_write(struct usb_phy *phy, u32 val, u32 reg)
+{
+ struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
+ int cnt = 0;
+
+ /* initiate write operation */
+ writel(ULPI_RUN | ULPI_WRITE |
+ ULPI_ADDR(reg) | ULPI_DATA(val),
+ USB_ULPI_VIEWPORT);
+
+ /* wait for completion */
+ while (cnt < ULPI_IO_TIMEOUT_USEC) {
+ if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
+ break;
+ udelay(1);
+ cnt++;
+ }
+
+ if (cnt >= ULPI_IO_TIMEOUT_USEC) {
+ dev_err(phy->dev, "ulpi_write: timeout\n");
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+static struct usb_phy_io_ops msm_otg_io_ops = {
+ .read = ulpi_read,
+ .write = ulpi_write,
+};
+
+static void ulpi_init(struct msm_otg *motg)
+{
+ struct msm_otg_platform_data *pdata = motg->pdata;
+ int *seq = pdata->phy_init_seq, idx;
+ u32 addr = ULPI_EXT_VENDOR_SPECIFIC;
+
+ for (idx = 0; idx < pdata->phy_init_sz; idx++) {
+ if (seq[idx] == -1)
+ continue;
+
+ dev_vdbg(motg->phy.dev, "ulpi: write 0x%02x to 0x%02x\n",
+ seq[idx], addr + idx);
+ ulpi_write(&motg->phy, seq[idx], addr + idx);
+ }
+}
+
+static int msm_phy_notify_disconnect(struct usb_phy *phy,
+ enum usb_device_speed speed)
+{
+ int val;
+
+ /*
+ * Put the transceiver in non-driving mode. Otherwise host
+ * may not detect soft-disconnection.
+ */
+ val = ulpi_read(phy, ULPI_FUNC_CTRL);
+ val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
+ val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
+ ulpi_write(phy, val, ULPI_FUNC_CTRL);
+
+ return 0;
+}
+
+static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
+{
+ int ret;
+
+ if (assert)
+ ret = reset_control_assert(motg->link_rst);
+ else
+ ret = reset_control_deassert(motg->link_rst);
+
+ if (ret)
+ dev_err(motg->phy.dev, "usb link clk reset %s failed\n",
+ assert ? "assert" : "deassert");
+
+ return ret;
+}
+
+static int msm_otg_phy_clk_reset(struct msm_otg *motg)
+{
+ int ret = 0;
+
+ if (motg->phy_rst)
+ ret = reset_control_reset(motg->phy_rst);
+
+ if (ret)
+ dev_err(motg->phy.dev, "usb phy clk reset failed\n");
+
+ return ret;
+}
+
+static int msm_link_reset(struct msm_otg *motg)
+{
+ u32 val;
+ int ret;
+
+ ret = msm_otg_link_clk_reset(motg, 1);
+ if (ret)
+ return ret;
+
+ /* wait for 1ms delay as suggested in HPG. */
+ usleep_range(1000, 1200);
+
+ ret = msm_otg_link_clk_reset(motg, 0);
+ if (ret)
+ return ret;
+
+ if (motg->phy_number)
+ writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
+
+ /* put transceiver in serial mode as part of reset */
+ val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK;
+ writel(val | PORTSC_PTS_SERIAL, USB_PORTSC);
+
+ return 0;
+}
+
+static int msm_otg_reset(struct usb_phy *phy)
+{
+ struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
+ int cnt = 0;
+
+ writel(USBCMD_RESET, USB_USBCMD);
+ while (cnt < LINK_RESET_TIMEOUT_USEC) {
+ if (!(readl(USB_USBCMD) & USBCMD_RESET))
+ break;
+ udelay(1);
+ cnt++;
+ }
+ if (cnt >= LINK_RESET_TIMEOUT_USEC)
+ return -ETIMEDOUT;
+
+ /* select ULPI phy and clear other status/control bits in PORTSC */
+ writel(PORTSC_PTS_ULPI, USB_PORTSC);
+
+ writel(0x0, USB_AHBBURST);
+ writel(0x08, USB_AHBMODE);
+
+ if (motg->phy_number)
+ writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
+ return 0;
+}
+
+static void msm_phy_reset(struct msm_otg *motg)
+{
+ void __iomem *addr;
+
+ if (motg->pdata->phy_type != SNPS_28NM_INTEGRATED_PHY) {
+ msm_otg_phy_clk_reset(motg);
+ return;
+ }
+
+ addr = USB_PHY_CTRL;
+ if (motg->phy_number)
+ addr = USB_PHY_CTRL2;
+
+ /* Assert USB PHY_POR */
+ writel(readl(addr) | PHY_POR_ASSERT, addr);
+
+ /*
+ * wait for minimum 10 microseconds as suggested in HPG.
+ * Use a slightly larger value since the exact value didn't
+ * work 100% of the time.
+ */
+ udelay(12);
+
+ /* Deassert USB PHY_POR */
+ writel(readl(addr) & ~PHY_POR_ASSERT, addr);
+}
+
+static int msm_usb_reset(struct usb_phy *phy)
+{
+ struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
+ int ret;
+
+ if (!IS_ERR(motg->core_clk))
+ clk_prepare_enable(motg->core_clk);
+
+ ret = msm_link_reset(motg);
+ if (ret) {
+ dev_err(phy->dev, "phy_reset failed\n");
+ return ret;
+ }
+
+ ret = msm_otg_reset(&motg->phy);
+ if (ret) {
+ dev_err(phy->dev, "link reset failed\n");
+ return ret;
+ }
+
+ msleep(100);
+
+ /* Reset USB PHY after performing USB Link RESET */
+ msm_phy_reset(motg);
+
+ if (!IS_ERR(motg->core_clk))
+ clk_disable_unprepare(motg->core_clk);
+
+ return 0;
+}
+
+static int msm_phy_init(struct usb_phy *phy)
+{
+ struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
+ struct msm_otg_platform_data *pdata = motg->pdata;
+ u32 val, ulpi_val = 0;
+
+ /* Program USB PHY Override registers. */
+ ulpi_init(motg);
+
+ /*
+ * It is recommended in HPG to reset USB PHY after programming
+ * USB PHY Override registers.
+ */
+ msm_phy_reset(motg);
+
+ if (pdata->otg_control == OTG_PHY_CONTROL) {
+ val = readl(USB_OTGSC);
+ if (pdata->mode == USB_DR_MODE_OTG) {
+ ulpi_val = ULPI_INT_IDGRD | ULPI_INT_SESS_VALID;
+ val |= OTGSC_IDIE | OTGSC_BSVIE;
+ } else if (pdata->mode == USB_DR_MODE_PERIPHERAL) {
+ ulpi_val = ULPI_INT_SESS_VALID;
+ val |= OTGSC_BSVIE;
+ }
+ writel(val, USB_OTGSC);
+ ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_RISE);
+ ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL);
+ }
+
+ if (motg->phy_number)
+ writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2);
+
+ return 0;
+}
+
+#define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000)
+#define PHY_RESUME_TIMEOUT_USEC (100 * 1000)
+
+#ifdef CONFIG_PM
+
+static int msm_hsusb_config_vddcx(struct msm_otg *motg, int high)
+{
+ int max_vol = motg->vdd_levels[VDD_LEVEL_MAX];
+ int min_vol;
+ int ret;
+
+ if (high)
+ min_vol = motg->vdd_levels[VDD_LEVEL_MIN];
+ else
+ min_vol = motg->vdd_levels[VDD_LEVEL_NONE];
+
+ ret = regulator_set_voltage(motg->vddcx, min_vol, max_vol);
+ if (ret) {
+ pr_err("Cannot set vddcx voltage\n");
+ return ret;
+ }
+
+ pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol);
+
+ return ret;
+}
+
+static int msm_otg_suspend(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ struct usb_bus *bus = phy->otg->host;
+ struct msm_otg_platform_data *pdata = motg->pdata;
+ void __iomem *addr;
+ int cnt = 0;
+
+ if (atomic_read(&motg->in_lpm))
+ return 0;
+
+ disable_irq(motg->irq);
+ /*
+ * Chipidea 45-nm PHY suspend sequence:
+ *
+ * Interrupt Latch Register auto-clear feature is not present
+ * in all PHY versions. Latch register is clear on read type.
+ * Clear latch register to avoid spurious wakeup from
+ * low power mode (LPM).
+ *
+ * PHY comparators are disabled when PHY enters into low power
+ * mode (LPM). Keep PHY comparators ON in LPM only when we expect
+ * VBUS/Id notifications from USB PHY. Otherwise turn off USB
+ * PHY comparators. This save significant amount of power.
+ *
+ * PLL is not turned off when PHY enters into low power mode (LPM).
+ * Disable PLL for maximum power savings.
+ */
+
+ if (motg->pdata->phy_type == CI_45NM_INTEGRATED_PHY) {
+ ulpi_read(phy, 0x14);
+ if (pdata->otg_control == OTG_PHY_CONTROL)
+ ulpi_write(phy, 0x01, 0x30);
+ ulpi_write(phy, 0x08, 0x09);
+ }
+
+ /*
+ * PHY may take some time or even fail to enter into low power
+ * mode (LPM). Hence poll for 500 msec and reset the PHY and link
+ * in failure case.
+ */
+ writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
+ while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
+ if (readl(USB_PORTSC) & PORTSC_PHCD)
+ break;
+ udelay(1);
+ cnt++;
+ }
+
+ if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) {
+ dev_err(phy->dev, "Unable to suspend PHY\n");
+ msm_otg_reset(phy);
+ enable_irq(motg->irq);
+ return -ETIMEDOUT;
+ }
+
+ /*
+ * PHY has capability to generate interrupt asynchronously in low
+ * power mode (LPM). This interrupt is level triggered. So USB IRQ
+ * line must be disabled till async interrupt enable bit is cleared
+ * in USBCMD register. Assert STP (ULPI interface STOP signal) to
+ * block data communication from PHY.
+ */
+ writel(readl(USB_USBCMD) | ASYNC_INTR_CTRL | ULPI_STP_CTRL, USB_USBCMD);
+
+ addr = USB_PHY_CTRL;
+ if (motg->phy_number)
+ addr = USB_PHY_CTRL2;
+
+ if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
+ motg->pdata->otg_control == OTG_PMIC_CONTROL)
+ writel(readl(addr) | PHY_RETEN, addr);
+
+ clk_disable_unprepare(motg->pclk);
+ clk_disable_unprepare(motg->clk);
+ if (!IS_ERR(motg->core_clk))
+ clk_disable_unprepare(motg->core_clk);
+
+ if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
+ motg->pdata->otg_control == OTG_PMIC_CONTROL) {
+ msm_hsusb_ldo_set_mode(motg, 0);
+ msm_hsusb_config_vddcx(motg, 0);
+ }
+
+ if (device_may_wakeup(phy->dev))
+ enable_irq_wake(motg->irq);
+ if (bus)
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
+
+ atomic_set(&motg->in_lpm, 1);
+ enable_irq(motg->irq);
+
+ dev_info(phy->dev, "USB in low power mode\n");
+
+ return 0;
+}
+
+static int msm_otg_resume(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ struct usb_bus *bus = phy->otg->host;
+ void __iomem *addr;
+ int cnt = 0;
+ unsigned temp;
+
+ if (!atomic_read(&motg->in_lpm))
+ return 0;
+
+ clk_prepare_enable(motg->pclk);
+ clk_prepare_enable(motg->clk);
+ if (!IS_ERR(motg->core_clk))
+ clk_prepare_enable(motg->core_clk);
+
+ if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY &&
+ motg->pdata->otg_control == OTG_PMIC_CONTROL) {
+
+ addr = USB_PHY_CTRL;
+ if (motg->phy_number)
+ addr = USB_PHY_CTRL2;
+
+ msm_hsusb_ldo_set_mode(motg, 1);
+ msm_hsusb_config_vddcx(motg, 1);
+ writel(readl(addr) & ~PHY_RETEN, addr);
+ }
+
+ temp = readl(USB_USBCMD);
+ temp &= ~ASYNC_INTR_CTRL;
+ temp &= ~ULPI_STP_CTRL;
+ writel(temp, USB_USBCMD);
+
+ /*
+ * PHY comes out of low power mode (LPM) in case of wakeup
+ * from asynchronous interrupt.
+ */
+ if (!(readl(USB_PORTSC) & PORTSC_PHCD))
+ goto skip_phy_resume;
+
+ writel(readl(USB_PORTSC) & ~PORTSC_PHCD, USB_PORTSC);
+ while (cnt < PHY_RESUME_TIMEOUT_USEC) {
+ if (!(readl(USB_PORTSC) & PORTSC_PHCD))
+ break;
+ udelay(1);
+ cnt++;
+ }
+
+ if (cnt >= PHY_RESUME_TIMEOUT_USEC) {
+ /*
+ * This is a fatal error. Reset the link and
+ * PHY. USB state can not be restored. Re-insertion
+ * of USB cable is the only way to get USB working.
+ */
+ dev_err(phy->dev, "Unable to resume USB. Re-plugin the cable\n");
+ msm_otg_reset(phy);
+ }
+
+skip_phy_resume:
+ if (device_may_wakeup(phy->dev))
+ disable_irq_wake(motg->irq);
+ if (bus)
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
+
+ atomic_set(&motg->in_lpm, 0);
+
+ if (motg->async_int) {
+ motg->async_int = 0;
+ pm_runtime_put(phy->dev);
+ enable_irq(motg->irq);
+ }
+
+ dev_info(phy->dev, "USB exited from low power mode\n");
+
+ return 0;
+}
+#endif
+
+static void msm_otg_notify_charger(struct msm_otg *motg, unsigned mA)
+{
+ if (motg->cur_power == mA)
+ return;
+
+ /* TODO: Notify PMIC about available current */
+ dev_info(motg->phy.dev, "Avail curr from USB = %u\n", mA);
+ motg->cur_power = mA;
+}
+
+static int msm_otg_set_power(struct usb_phy *phy, unsigned mA)
+{
+ struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
+
+ /*
+ * Gadget driver uses set_power method to notify about the
+ * available current based on suspend/configured states.
+ *
+ * IDEV_CHG can be drawn irrespective of suspend/un-configured
+ * states when CDP/ACA is connected.
+ */
+ if (motg->chg_type == USB_SDP_CHARGER)
+ msm_otg_notify_charger(motg, mA);
+
+ return 0;
+}
+
+static void msm_otg_start_host(struct usb_phy *phy, int on)
+{
+ struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
+ struct msm_otg_platform_data *pdata = motg->pdata;
+ struct usb_hcd *hcd;
+
+ if (!phy->otg->host)
+ return;
+
+ hcd = bus_to_hcd(phy->otg->host);
+
+ if (on) {
+ dev_dbg(phy->dev, "host on\n");
+
+ if (pdata->vbus_power)
+ pdata->vbus_power(1);
+ /*
+ * Some boards have a switch cotrolled by gpio
+ * to enable/disable internal HUB. Enable internal
+ * HUB before kicking the host.
+ */
+ if (pdata->setup_gpio)
+ pdata->setup_gpio(OTG_STATE_A_HOST);
+#ifdef CONFIG_USB
+ usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
+ device_wakeup_enable(hcd->self.controller);
+#endif
+ } else {
+ dev_dbg(phy->dev, "host off\n");
+
+#ifdef CONFIG_USB
+ usb_remove_hcd(hcd);
+#endif
+ if (pdata->setup_gpio)
+ pdata->setup_gpio(OTG_STATE_UNDEFINED);
+ if (pdata->vbus_power)
+ pdata->vbus_power(0);
+ }
+}
+
+static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ struct msm_otg *motg = container_of(otg->usb_phy, struct msm_otg, phy);
+ struct usb_hcd *hcd;
+
+ /*
+ * Fail host registration if this board can support
+ * only peripheral configuration.
+ */
+ if (motg->pdata->mode == USB_DR_MODE_PERIPHERAL) {
+ dev_info(otg->usb_phy->dev, "Host mode is not supported\n");
+ return -ENODEV;
+ }
+
+ if (!host) {
+ if (otg->state == OTG_STATE_A_HOST) {
+ pm_runtime_get_sync(otg->usb_phy->dev);
+ msm_otg_start_host(otg->usb_phy, 0);
+ otg->host = NULL;
+ otg->state = OTG_STATE_UNDEFINED;
+ schedule_work(&motg->sm_work);
+ } else {
+ otg->host = NULL;
+ }
+
+ return 0;
+ }
+
+ hcd = bus_to_hcd(host);
+ hcd->power_budget = motg->pdata->power_budget;
+
+ otg->host = host;
+ dev_dbg(otg->usb_phy->dev, "host driver registered w/ tranceiver\n");
+
+ /*
+ * Kick the state machine work, if peripheral is not supported
+ * or peripheral is already registered with us.
+ */
+ if (motg->pdata->mode == USB_DR_MODE_HOST || otg->gadget) {
+ pm_runtime_get_sync(otg->usb_phy->dev);
+ schedule_work(&motg->sm_work);
+ }
+
+ return 0;
+}
+
+static void msm_otg_start_peripheral(struct usb_phy *phy, int on)
+{
+ struct msm_otg *motg = container_of(phy, struct msm_otg, phy);
+ struct msm_otg_platform_data *pdata = motg->pdata;
+
+ if (!phy->otg->gadget)
+ return;
+
+ if (on) {
+ dev_dbg(phy->dev, "gadget on\n");
+ /*
+ * Some boards have a switch cotrolled by gpio
+ * to enable/disable internal HUB. Disable internal
+ * HUB before kicking the gadget.
+ */
+ if (pdata->setup_gpio)
+ pdata->setup_gpio(OTG_STATE_B_PERIPHERAL);
+ usb_gadget_vbus_connect(phy->otg->gadget);
+ } else {
+ dev_dbg(phy->dev, "gadget off\n");
+ usb_gadget_vbus_disconnect(phy->otg->gadget);
+ if (pdata->setup_gpio)
+ pdata->setup_gpio(OTG_STATE_UNDEFINED);
+ }
+
+}
+
+static int msm_otg_set_peripheral(struct usb_otg *otg,
+ struct usb_gadget *gadget)
+{
+ struct msm_otg *motg = container_of(otg->usb_phy, struct msm_otg, phy);
+
+ /*
+ * Fail peripheral registration if this board can support
+ * only host configuration.
+ */
+ if (motg->pdata->mode == USB_DR_MODE_HOST) {
+ dev_info(otg->usb_phy->dev, "Peripheral mode is not supported\n");
+ return -ENODEV;
+ }
+
+ if (!gadget) {
+ if (otg->state == OTG_STATE_B_PERIPHERAL) {
+ pm_runtime_get_sync(otg->usb_phy->dev);
+ msm_otg_start_peripheral(otg->usb_phy, 0);
+ otg->gadget = NULL;
+ otg->state = OTG_STATE_UNDEFINED;
+ schedule_work(&motg->sm_work);
+ } else {
+ otg->gadget = NULL;
+ }
+
+ return 0;
+ }
+ otg->gadget = gadget;
+ dev_dbg(otg->usb_phy->dev,
+ "peripheral driver registered w/ tranceiver\n");
+
+ /*
+ * Kick the state machine work, if host is not supported
+ * or host is already registered with us.
+ */
+ if (motg->pdata->mode == USB_DR_MODE_PERIPHERAL || otg->host) {
+ pm_runtime_get_sync(otg->usb_phy->dev);
+ schedule_work(&motg->sm_work);
+ }
+
+ return 0;
+}
+
+static bool msm_chg_check_secondary_det(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ u32 chg_det;
+ bool ret = false;
+
+ switch (motg->pdata->phy_type) {
+ case CI_45NM_INTEGRATED_PHY:
+ chg_det = ulpi_read(phy, 0x34);
+ ret = chg_det & (1 << 4);
+ break;
+ case SNPS_28NM_INTEGRATED_PHY:
+ chg_det = ulpi_read(phy, 0x87);
+ ret = chg_det & 1;
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+static void msm_chg_enable_secondary_det(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ u32 chg_det;
+
+ switch (motg->pdata->phy_type) {
+ case CI_45NM_INTEGRATED_PHY:
+ chg_det = ulpi_read(phy, 0x34);
+ /* Turn off charger block */
+ chg_det |= ~(1 << 1);
+ ulpi_write(phy, chg_det, 0x34);
+ udelay(20);
+ /* control chg block via ULPI */
+ chg_det &= ~(1 << 3);
+ ulpi_write(phy, chg_det, 0x34);
+ /* put it in host mode for enabling D- source */
+ chg_det &= ~(1 << 2);
+ ulpi_write(phy, chg_det, 0x34);
+ /* Turn on chg detect block */
+ chg_det &= ~(1 << 1);
+ ulpi_write(phy, chg_det, 0x34);
+ udelay(20);
+ /* enable chg detection */
+ chg_det &= ~(1 << 0);
+ ulpi_write(phy, chg_det, 0x34);
+ break;
+ case SNPS_28NM_INTEGRATED_PHY:
+ /*
+ * Configure DM as current source, DP as current sink
+ * and enable battery charging comparators.
+ */
+ ulpi_write(phy, 0x8, 0x85);
+ ulpi_write(phy, 0x2, 0x85);
+ ulpi_write(phy, 0x1, 0x85);
+ break;
+ default:
+ break;
+ }
+}
+
+static bool msm_chg_check_primary_det(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ u32 chg_det;
+ bool ret = false;
+
+ switch (motg->pdata->phy_type) {
+ case CI_45NM_INTEGRATED_PHY:
+ chg_det = ulpi_read(phy, 0x34);
+ ret = chg_det & (1 << 4);
+ break;
+ case SNPS_28NM_INTEGRATED_PHY:
+ chg_det = ulpi_read(phy, 0x87);
+ ret = chg_det & 1;
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+static void msm_chg_enable_primary_det(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ u32 chg_det;
+
+ switch (motg->pdata->phy_type) {
+ case CI_45NM_INTEGRATED_PHY:
+ chg_det = ulpi_read(phy, 0x34);
+ /* enable chg detection */
+ chg_det &= ~(1 << 0);
+ ulpi_write(phy, chg_det, 0x34);
+ break;
+ case SNPS_28NM_INTEGRATED_PHY:
+ /*
+ * Configure DP as current source, DM as current sink
+ * and enable battery charging comparators.
+ */
+ ulpi_write(phy, 0x2, 0x85);
+ ulpi_write(phy, 0x1, 0x85);
+ break;
+ default:
+ break;
+ }
+}
+
+static bool msm_chg_check_dcd(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ u32 line_state;
+ bool ret = false;
+
+ switch (motg->pdata->phy_type) {
+ case CI_45NM_INTEGRATED_PHY:
+ line_state = ulpi_read(phy, 0x15);
+ ret = !(line_state & 1);
+ break;
+ case SNPS_28NM_INTEGRATED_PHY:
+ line_state = ulpi_read(phy, 0x87);
+ ret = line_state & 2;
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+static void msm_chg_disable_dcd(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ u32 chg_det;
+
+ switch (motg->pdata->phy_type) {
+ case CI_45NM_INTEGRATED_PHY:
+ chg_det = ulpi_read(phy, 0x34);
+ chg_det &= ~(1 << 5);
+ ulpi_write(phy, chg_det, 0x34);
+ break;
+ case SNPS_28NM_INTEGRATED_PHY:
+ ulpi_write(phy, 0x10, 0x86);
+ break;
+ default:
+ break;
+ }
+}
+
+static void msm_chg_enable_dcd(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ u32 chg_det;
+
+ switch (motg->pdata->phy_type) {
+ case CI_45NM_INTEGRATED_PHY:
+ chg_det = ulpi_read(phy, 0x34);
+ /* Turn on D+ current source */
+ chg_det |= (1 << 5);
+ ulpi_write(phy, chg_det, 0x34);
+ break;
+ case SNPS_28NM_INTEGRATED_PHY:
+ /* Data contact detection enable */
+ ulpi_write(phy, 0x10, 0x85);
+ break;
+ default:
+ break;
+ }
+}
+
+static void msm_chg_block_on(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ u32 func_ctrl, chg_det;
+
+ /* put the controller in non-driving mode */
+ func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL);
+ func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
+ func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
+ ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL);
+
+ switch (motg->pdata->phy_type) {
+ case CI_45NM_INTEGRATED_PHY:
+ chg_det = ulpi_read(phy, 0x34);
+ /* control chg block via ULPI */
+ chg_det &= ~(1 << 3);
+ ulpi_write(phy, chg_det, 0x34);
+ /* Turn on chg detect block */
+ chg_det &= ~(1 << 1);
+ ulpi_write(phy, chg_det, 0x34);
+ udelay(20);
+ break;
+ case SNPS_28NM_INTEGRATED_PHY:
+ /* Clear charger detecting control bits */
+ ulpi_write(phy, 0x3F, 0x86);
+ /* Clear alt interrupt latch and enable bits */
+ ulpi_write(phy, 0x1F, 0x92);
+ ulpi_write(phy, 0x1F, 0x95);
+ udelay(100);
+ break;
+ default:
+ break;
+ }
+}
+
+static void msm_chg_block_off(struct msm_otg *motg)
+{
+ struct usb_phy *phy = &motg->phy;
+ u32 func_ctrl, chg_det;
+
+ switch (motg->pdata->phy_type) {
+ case CI_45NM_INTEGRATED_PHY:
+ chg_det = ulpi_read(phy, 0x34);
+ /* Turn off charger block */
+ chg_det |= ~(1 << 1);
+ ulpi_write(phy, chg_det, 0x34);
+ break;
+ case SNPS_28NM_INTEGRATED_PHY:
+ /* Clear charger detecting control bits */
+ ulpi_write(phy, 0x3F, 0x86);
+ /* Clear alt interrupt latch and enable bits */
+ ulpi_write(phy, 0x1F, 0x92);
+ ulpi_write(phy, 0x1F, 0x95);
+ break;
+ default:
+ break;
+ }
+
+ /* put the controller in normal mode */
+ func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL);
+ func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
+ func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
+ ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL);
+}
+
+#define MSM_CHG_DCD_POLL_TIME (100 * HZ/1000) /* 100 msec */
+#define MSM_CHG_DCD_MAX_RETRIES 6 /* Tdcd_tmout = 6 * 100 msec */
+#define MSM_CHG_PRIMARY_DET_TIME (40 * HZ/1000) /* TVDPSRC_ON */
+#define MSM_CHG_SECONDARY_DET_TIME (40 * HZ/1000) /* TVDMSRC_ON */
+static void msm_chg_detect_work(struct work_struct *w)
+{
+ struct msm_otg *motg = container_of(w, struct msm_otg, chg_work.work);
+ struct usb_phy *phy = &motg->phy;
+ bool is_dcd, tmout, vout;
+ unsigned long delay;
+
+ dev_dbg(phy->dev, "chg detection work\n");
+ switch (motg->chg_state) {
+ case USB_CHG_STATE_UNDEFINED:
+ pm_runtime_get_sync(phy->dev);
+ msm_chg_block_on(motg);
+ msm_chg_enable_dcd(motg);
+ motg->chg_state = USB_CHG_STATE_WAIT_FOR_DCD;
+ motg->dcd_retries = 0;
+ delay = MSM_CHG_DCD_POLL_TIME;
+ break;
+ case USB_CHG_STATE_WAIT_FOR_DCD:
+ is_dcd = msm_chg_check_dcd(motg);
+ tmout = ++motg->dcd_retries == MSM_CHG_DCD_MAX_RETRIES;
+ if (is_dcd || tmout) {
+ msm_chg_disable_dcd(motg);
+ msm_chg_enable_primary_det(motg);
+ delay = MSM_CHG_PRIMARY_DET_TIME;
+ motg->chg_state = USB_CHG_STATE_DCD_DONE;
+ } else {
+ delay = MSM_CHG_DCD_POLL_TIME;
+ }
+ break;
+ case USB_CHG_STATE_DCD_DONE:
+ vout = msm_chg_check_primary_det(motg);
+ if (vout) {
+ msm_chg_enable_secondary_det(motg);
+ delay = MSM_CHG_SECONDARY_DET_TIME;
+ motg->chg_state = USB_CHG_STATE_PRIMARY_DONE;
+ } else {
+ motg->chg_type = USB_SDP_CHARGER;
+ motg->chg_state = USB_CHG_STATE_DETECTED;
+ delay = 0;
+ }
+ break;
+ case USB_CHG_STATE_PRIMARY_DONE:
+ vout = msm_chg_check_secondary_det(motg);
+ if (vout)
+ motg->chg_type = USB_DCP_CHARGER;
+ else
+ motg->chg_type = USB_CDP_CHARGER;
+ motg->chg_state = USB_CHG_STATE_SECONDARY_DONE;
+ /* fall through */
+ case USB_CHG_STATE_SECONDARY_DONE:
+ motg->chg_state = USB_CHG_STATE_DETECTED;
+ case USB_CHG_STATE_DETECTED:
+ msm_chg_block_off(motg);
+ dev_dbg(phy->dev, "charger = %d\n", motg->chg_type);
+ schedule_work(&motg->sm_work);
+ return;
+ default:
+ return;
+ }
+
+ schedule_delayed_work(&motg->chg_work, delay);
+}
+
+/*
+ * We support OTG, Peripheral only and Host only configurations. In case
+ * of OTG, mode switch (host-->peripheral/peripheral-->host) can happen
+ * via Id pin status or user request (debugfs). Id/BSV interrupts are not
+ * enabled when switch is controlled by user and default mode is supplied
+ * by board file, which can be changed by userspace later.
+ */
+static void msm_otg_init_sm(struct msm_otg *motg)
+{
+ struct msm_otg_platform_data *pdata = motg->pdata;
+ u32 otgsc = readl(USB_OTGSC);
+
+ switch (pdata->mode) {
+ case USB_DR_MODE_OTG:
+ if (pdata->otg_control == OTG_PHY_CONTROL) {
+ if (otgsc & OTGSC_ID)
+ set_bit(ID, &motg->inputs);
+ else
+ clear_bit(ID, &motg->inputs);
+
+ if (otgsc & OTGSC_BSV)
+ set_bit(B_SESS_VLD, &motg->inputs);
+ else
+ clear_bit(B_SESS_VLD, &motg->inputs);
+ } else if (pdata->otg_control == OTG_USER_CONTROL) {
+ set_bit(ID, &motg->inputs);
+ clear_bit(B_SESS_VLD, &motg->inputs);
+ }
+ break;
+ case USB_DR_MODE_HOST:
+ clear_bit(ID, &motg->inputs);
+ break;
+ case USB_DR_MODE_PERIPHERAL:
+ set_bit(ID, &motg->inputs);
+ if (otgsc & OTGSC_BSV)
+ set_bit(B_SESS_VLD, &motg->inputs);
+ else
+ clear_bit(B_SESS_VLD, &motg->inputs);
+ break;
+ default:
+ break;
+ }
+}
+
+static void msm_otg_sm_work(struct work_struct *w)
+{
+ struct msm_otg *motg = container_of(w, struct msm_otg, sm_work);
+ struct usb_otg *otg = motg->phy.otg;
+
+ switch (otg->state) {
+ case OTG_STATE_UNDEFINED:
+ dev_dbg(otg->usb_phy->dev, "OTG_STATE_UNDEFINED state\n");
+ msm_otg_reset(otg->usb_phy);
+ msm_otg_init_sm(motg);
+ otg->state = OTG_STATE_B_IDLE;
+ /* FALL THROUGH */
+ case OTG_STATE_B_IDLE:
+ dev_dbg(otg->usb_phy->dev, "OTG_STATE_B_IDLE state\n");
+ if (!test_bit(ID, &motg->inputs) && otg->host) {
+ /* disable BSV bit */
+ writel(readl(USB_OTGSC) & ~OTGSC_BSVIE, USB_OTGSC);
+ msm_otg_start_host(otg->usb_phy, 1);
+ otg->state = OTG_STATE_A_HOST;
+ } else if (test_bit(B_SESS_VLD, &motg->inputs)) {
+ switch (motg->chg_state) {
+ case USB_CHG_STATE_UNDEFINED:
+ msm_chg_detect_work(&motg->chg_work.work);
+ break;
+ case USB_CHG_STATE_DETECTED:
+ switch (motg->chg_type) {
+ case USB_DCP_CHARGER:
+ msm_otg_notify_charger(motg,
+ IDEV_CHG_MAX);
+ break;
+ case USB_CDP_CHARGER:
+ msm_otg_notify_charger(motg,
+ IDEV_CHG_MAX);
+ msm_otg_start_peripheral(otg->usb_phy,
+ 1);
+ otg->state
+ = OTG_STATE_B_PERIPHERAL;
+ break;
+ case USB_SDP_CHARGER:
+ msm_otg_notify_charger(motg, IUNIT);
+ msm_otg_start_peripheral(otg->usb_phy,
+ 1);
+ otg->state
+ = OTG_STATE_B_PERIPHERAL;
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ } else {
+ /*
+ * If charger detection work is pending, decrement
+ * the pm usage counter to balance with the one that
+ * is incremented in charger detection work.
+ */
+ if (cancel_delayed_work_sync(&motg->chg_work)) {
+ pm_runtime_put_sync(otg->usb_phy->dev);
+ msm_otg_reset(otg->usb_phy);
+ }
+ msm_otg_notify_charger(motg, 0);
+ motg->chg_state = USB_CHG_STATE_UNDEFINED;
+ motg->chg_type = USB_INVALID_CHARGER;
+ }
+
+ if (otg->state == OTG_STATE_B_IDLE)
+ pm_runtime_put_sync(otg->usb_phy->dev);
+ break;
+ case OTG_STATE_B_PERIPHERAL:
+ dev_dbg(otg->usb_phy->dev, "OTG_STATE_B_PERIPHERAL state\n");
+ if (!test_bit(B_SESS_VLD, &motg->inputs) ||
+ !test_bit(ID, &motg->inputs)) {
+ msm_otg_notify_charger(motg, 0);
+ msm_otg_start_peripheral(otg->usb_phy, 0);
+ motg->chg_state = USB_CHG_STATE_UNDEFINED;
+ motg->chg_type = USB_INVALID_CHARGER;
+ otg->state = OTG_STATE_B_IDLE;
+ msm_otg_reset(otg->usb_phy);
+ schedule_work(w);
+ }
+ break;
+ case OTG_STATE_A_HOST:
+ dev_dbg(otg->usb_phy->dev, "OTG_STATE_A_HOST state\n");
+ if (test_bit(ID, &motg->inputs)) {
+ msm_otg_start_host(otg->usb_phy, 0);
+ otg->state = OTG_STATE_B_IDLE;
+ msm_otg_reset(otg->usb_phy);
+ schedule_work(w);
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+static irqreturn_t msm_otg_irq(int irq, void *data)
+{
+ struct msm_otg *motg = data;
+ struct usb_phy *phy = &motg->phy;
+ u32 otgsc = 0;
+
+ if (atomic_read(&motg->in_lpm)) {
+ disable_irq_nosync(irq);
+ motg->async_int = 1;
+ pm_runtime_get(phy->dev);
+ return IRQ_HANDLED;
+ }
+
+ otgsc = readl(USB_OTGSC);
+ if (!(otgsc & (OTGSC_IDIS | OTGSC_BSVIS)))
+ return IRQ_NONE;
+
+ if ((otgsc & OTGSC_IDIS) && (otgsc & OTGSC_IDIE)) {
+ if (otgsc & OTGSC_ID)
+ set_bit(ID, &motg->inputs);
+ else
+ clear_bit(ID, &motg->inputs);
+ dev_dbg(phy->dev, "ID set/clear\n");
+ pm_runtime_get_noresume(phy->dev);
+ } else if ((otgsc & OTGSC_BSVIS) && (otgsc & OTGSC_BSVIE)) {
+ if (otgsc & OTGSC_BSV)
+ set_bit(B_SESS_VLD, &motg->inputs);
+ else
+ clear_bit(B_SESS_VLD, &motg->inputs);
+ dev_dbg(phy->dev, "BSV set/clear\n");
+ pm_runtime_get_noresume(phy->dev);
+ }
+
+ writel(otgsc, USB_OTGSC);
+ schedule_work(&motg->sm_work);
+ return IRQ_HANDLED;
+}
+
+static int msm_otg_mode_show(struct seq_file *s, void *unused)
+{
+ struct msm_otg *motg = s->private;
+ struct usb_otg *otg = motg->phy.otg;
+
+ switch (otg->state) {
+ case OTG_STATE_A_HOST:
+ seq_puts(s, "host\n");
+ break;
+ case OTG_STATE_B_PERIPHERAL:
+ seq_puts(s, "peripheral\n");
+ break;
+ default:
+ seq_puts(s, "none\n");
+ break;
+ }
+
+ return 0;
+}
+
+static int msm_otg_mode_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, msm_otg_mode_show, inode->i_private);
+}
+
+static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct seq_file *s = file->private_data;
+ struct msm_otg *motg = s->private;
+ char buf[16];
+ struct usb_otg *otg = motg->phy.otg;
+ int status = count;
+ enum usb_dr_mode req_mode;
+
+ memset(buf, 0x00, sizeof(buf));
+
+ if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) {
+ status = -EFAULT;
+ goto out;
+ }
+
+ if (!strncmp(buf, "host", 4)) {
+ req_mode = USB_DR_MODE_HOST;
+ } else if (!strncmp(buf, "peripheral", 10)) {
+ req_mode = USB_DR_MODE_PERIPHERAL;
+ } else if (!strncmp(buf, "none", 4)) {
+ req_mode = USB_DR_MODE_UNKNOWN;
+ } else {
+ status = -EINVAL;
+ goto out;
+ }
+
+ switch (req_mode) {
+ case USB_DR_MODE_UNKNOWN:
+ switch (otg->state) {
+ case OTG_STATE_A_HOST:
+ case OTG_STATE_B_PERIPHERAL:
+ set_bit(ID, &motg->inputs);
+ clear_bit(B_SESS_VLD, &motg->inputs);
+ break;
+ default:
+ goto out;
+ }
+ break;
+ case USB_DR_MODE_PERIPHERAL:
+ switch (otg->state) {
+ case OTG_STATE_B_IDLE:
+ case OTG_STATE_A_HOST:
+ set_bit(ID, &motg->inputs);
+ set_bit(B_SESS_VLD, &motg->inputs);
+ break;
+ default:
+ goto out;
+ }
+ break;
+ case USB_DR_MODE_HOST:
+ switch (otg->state) {
+ case OTG_STATE_B_IDLE:
+ case OTG_STATE_B_PERIPHERAL:
+ clear_bit(ID, &motg->inputs);
+ break;
+ default:
+ goto out;
+ }
+ break;
+ default:
+ goto out;
+ }
+
+ pm_runtime_get_sync(otg->usb_phy->dev);
+ schedule_work(&motg->sm_work);
+out:
+ return status;
+}
+
+static const struct file_operations msm_otg_mode_fops = {
+ .open = msm_otg_mode_open,
+ .read = seq_read,
+ .write = msm_otg_mode_write,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static struct dentry *msm_otg_dbg_root;
+static struct dentry *msm_otg_dbg_mode;
+
+static int msm_otg_debugfs_init(struct msm_otg *motg)
+{
+ msm_otg_dbg_root = debugfs_create_dir("msm_otg", NULL);
+
+ if (!msm_otg_dbg_root || IS_ERR(msm_otg_dbg_root))
+ return -ENODEV;
+
+ msm_otg_dbg_mode = debugfs_create_file("mode", S_IRUGO | S_IWUSR,
+ msm_otg_dbg_root, motg, &msm_otg_mode_fops);
+ if (!msm_otg_dbg_mode) {
+ debugfs_remove(msm_otg_dbg_root);
+ msm_otg_dbg_root = NULL;
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void msm_otg_debugfs_cleanup(void)
+{
+ debugfs_remove(msm_otg_dbg_mode);
+ debugfs_remove(msm_otg_dbg_root);
+}
+
+static const struct of_device_id msm_otg_dt_match[] = {
+ {
+ .compatible = "qcom,usb-otg-ci",
+ .data = (void *) CI_45NM_INTEGRATED_PHY
+ },
+ {
+ .compatible = "qcom,usb-otg-snps",
+ .data = (void *) SNPS_28NM_INTEGRATED_PHY
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, msm_otg_dt_match);
+
+static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
+{
+ struct msm_otg_platform_data *pdata;
+ const struct of_device_id *id;
+ struct device_node *node = pdev->dev.of_node;
+ struct property *prop;
+ int len, ret, words;
+ u32 val, tmp[3];
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ motg->pdata = pdata;
+
+ id = of_match_device(msm_otg_dt_match, &pdev->dev);
+ pdata->phy_type = (enum msm_usb_phy_type) id->data;
+
+ motg->link_rst = devm_reset_control_get(&pdev->dev, "link");
+ if (IS_ERR(motg->link_rst))
+ return PTR_ERR(motg->link_rst);
+
+ motg->phy_rst = devm_reset_control_get(&pdev->dev, "phy");
+ if (IS_ERR(motg->phy_rst))
+ motg->phy_rst = NULL;
+
+ pdata->mode = of_usb_get_dr_mode(node);
+ if (pdata->mode == USB_DR_MODE_UNKNOWN)
+ pdata->mode = USB_DR_MODE_OTG;
+
+ pdata->otg_control = OTG_PHY_CONTROL;
+ if (!of_property_read_u32(node, "qcom,otg-control", &val))
+ if (val == OTG_PMIC_CONTROL)
+ pdata->otg_control = val;
+
+ if (!of_property_read_u32(node, "qcom,phy-num", &val) && val < 2)
+ motg->phy_number = val;
+
+ motg->vdd_levels[VDD_LEVEL_NONE] = USB_PHY_SUSP_DIG_VOL;
+ motg->vdd_levels[VDD_LEVEL_MIN] = USB_PHY_VDD_DIG_VOL_MIN;
+ motg->vdd_levels[VDD_LEVEL_MAX] = USB_PHY_VDD_DIG_VOL_MAX;
+
+ if (of_get_property(node, "qcom,vdd-levels", &len) &&
+ len == sizeof(tmp)) {
+ of_property_read_u32_array(node, "qcom,vdd-levels",
+ tmp, len / sizeof(*tmp));
+ motg->vdd_levels[VDD_LEVEL_NONE] = tmp[VDD_LEVEL_NONE];
+ motg->vdd_levels[VDD_LEVEL_MIN] = tmp[VDD_LEVEL_MIN];
+ motg->vdd_levels[VDD_LEVEL_MAX] = tmp[VDD_LEVEL_MAX];
+ }
+
+ prop = of_find_property(node, "qcom,phy-init-sequence", &len);
+ if (!prop || !len)
+ return 0;
+
+ words = len / sizeof(u32);
+
+ if (words >= ULPI_EXT_VENDOR_SPECIFIC) {
+ dev_warn(&pdev->dev, "Too big PHY init sequence %d\n", words);
+ return 0;
+ }
+
+ pdata->phy_init_seq = devm_kzalloc(&pdev->dev, len, GFP_KERNEL);
+ if (!pdata->phy_init_seq)
+ return 0;
+
+ ret = of_property_read_u32_array(node, "qcom,phy-init-sequence",
+ pdata->phy_init_seq, words);
+ if (!ret)
+ pdata->phy_init_sz = words;
+
+ return 0;
+}
+
+static int msm_otg_probe(struct platform_device *pdev)
+{
+ struct regulator_bulk_data regs[3];
+ int ret = 0;
+ struct device_node *np = pdev->dev.of_node;
+ struct msm_otg_platform_data *pdata;
+ struct resource *res;
+ struct msm_otg *motg;
+ struct usb_phy *phy;
+ void __iomem *phy_select;
+
+ motg = devm_kzalloc(&pdev->dev, sizeof(struct msm_otg), GFP_KERNEL);
+ if (!motg)
+ return -ENOMEM;
+
+ pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata) {
+ if (!np)
+ return -ENXIO;
+ ret = msm_otg_read_dt(pdev, motg);
+ if (ret)
+ return ret;
+ }
+
+ motg->phy.otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg),
+ GFP_KERNEL);
+ if (!motg->phy.otg)
+ return -ENOMEM;
+
+ phy = &motg->phy;
+ phy->dev = &pdev->dev;
+
+ motg->clk = devm_clk_get(&pdev->dev, np ? "core" : "usb_hs_clk");
+ if (IS_ERR(motg->clk)) {
+ dev_err(&pdev->dev, "failed to get usb_hs_clk\n");
+ return PTR_ERR(motg->clk);
+ }
+
+ /*
+ * If USB Core is running its protocol engine based on CORE CLK,
+ * CORE CLK must be running at >55Mhz for correct HSUSB
+ * operation and USB core cannot tolerate frequency changes on
+ * CORE CLK.
+ */
+ motg->pclk = devm_clk_get(&pdev->dev, np ? "iface" : "usb_hs_pclk");
+ if (IS_ERR(motg->pclk)) {
+ dev_err(&pdev->dev, "failed to get usb_hs_pclk\n");
+ return PTR_ERR(motg->pclk);
+ }
+
+ /*
+ * USB core clock is not present on all MSM chips. This
+ * clock is introduced to remove the dependency on AXI
+ * bus frequency.
+ */
+ motg->core_clk = devm_clk_get(&pdev->dev,
+ np ? "alt_core" : "usb_hs_core_clk");
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+ motg->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!motg->regs)
+ return -ENOMEM;
+
+ /*
+ * NOTE: The PHYs can be multiplexed between the chipidea controller
+ * and the dwc3 controller, using a single bit. It is important that
+ * the dwc3 driver does not set this bit in an incompatible way.
+ */
+ if (motg->phy_number) {
+ phy_select = devm_ioremap_nocache(&pdev->dev, USB2_PHY_SEL, 4);
+ if (!phy_select)
+ return -ENOMEM;
+ /* Enable second PHY with the OTG port */
+ writel(0x1, phy_select);
+ }
+
+ dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs);
+
+ motg->irq = platform_get_irq(pdev, 0);
+ if (motg->irq < 0) {
+ dev_err(&pdev->dev, "platform_get_irq failed\n");
+ return motg->irq;
+ }
+
+ regs[0].supply = "vddcx";
+ regs[1].supply = "v3p3";
+ regs[2].supply = "v1p8";
+
+ ret = devm_regulator_bulk_get(motg->phy.dev, ARRAY_SIZE(regs), regs);
+ if (ret)
+ return ret;
+
+ motg->vddcx = regs[0].consumer;
+ motg->v3p3 = regs[1].consumer;
+ motg->v1p8 = regs[2].consumer;
+
+ clk_set_rate(motg->clk, 60000000);
+
+ clk_prepare_enable(motg->clk);
+ clk_prepare_enable(motg->pclk);
+
+ if (!IS_ERR(motg->core_clk))
+ clk_prepare_enable(motg->core_clk);
+
+ ret = msm_hsusb_init_vddcx(motg, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "hsusb vddcx configuration failed\n");
+ goto disable_clks;
+ }
+
+ ret = msm_hsusb_ldo_init(motg, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "hsusb vreg configuration failed\n");
+ goto disable_vddcx;
+ }
+ ret = msm_hsusb_ldo_set_mode(motg, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "hsusb vreg enable failed\n");
+ goto disable_ldo;
+ }
+
+ writel(0, USB_USBINTR);
+ writel(0, USB_OTGSC);
+
+ INIT_WORK(&motg->sm_work, msm_otg_sm_work);
+ INIT_DELAYED_WORK(&motg->chg_work, msm_chg_detect_work);
+ ret = devm_request_irq(&pdev->dev, motg->irq, msm_otg_irq, IRQF_SHARED,
+ "msm_otg", motg);
+ if (ret) {
+ dev_err(&pdev->dev, "request irq failed\n");
+ goto disable_ldo;
+ }
+
+ phy->init = msm_phy_init;
+ phy->set_power = msm_otg_set_power;
+ phy->notify_disconnect = msm_phy_notify_disconnect;
+ phy->type = USB_PHY_TYPE_USB2;
+
+ phy->io_ops = &msm_otg_io_ops;
+
+ phy->otg->usb_phy = &motg->phy;
+ phy->otg->set_host = msm_otg_set_host;
+ phy->otg->set_peripheral = msm_otg_set_peripheral;
+
+ msm_usb_reset(phy);
+
+ ret = usb_add_phy_dev(&motg->phy);
+ if (ret) {
+ dev_err(&pdev->dev, "usb_add_phy failed\n");
+ goto disable_ldo;
+ }
+
+ platform_set_drvdata(pdev, motg);
+ device_init_wakeup(&pdev->dev, 1);
+
+ if (motg->pdata->mode == USB_DR_MODE_OTG &&
+ motg->pdata->otg_control == OTG_USER_CONTROL) {
+ ret = msm_otg_debugfs_init(motg);
+ if (ret)
+ dev_dbg(&pdev->dev, "Can not create mode change file\n");
+ }
+
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
+ return 0;
+
+disable_ldo:
+ msm_hsusb_ldo_init(motg, 0);
+disable_vddcx:
+ msm_hsusb_init_vddcx(motg, 0);
+disable_clks:
+ clk_disable_unprepare(motg->pclk);
+ clk_disable_unprepare(motg->clk);
+ if (!IS_ERR(motg->core_clk))
+ clk_disable_unprepare(motg->core_clk);
+ return ret;
+}
+
+static int msm_otg_remove(struct platform_device *pdev)
+{
+ struct msm_otg *motg = platform_get_drvdata(pdev);
+ struct usb_phy *phy = &motg->phy;
+ int cnt = 0;
+
+ if (phy->otg->host || phy->otg->gadget)
+ return -EBUSY;
+
+ msm_otg_debugfs_cleanup();
+ cancel_delayed_work_sync(&motg->chg_work);
+ cancel_work_sync(&motg->sm_work);
+
+ pm_runtime_resume(&pdev->dev);
+
+ device_init_wakeup(&pdev->dev, 0);
+ pm_runtime_disable(&pdev->dev);
+
+ usb_remove_phy(phy);
+ disable_irq(motg->irq);
+
+ /*
+ * Put PHY in low power mode.
+ */
+ ulpi_read(phy, 0x14);
+ ulpi_write(phy, 0x08, 0x09);
+
+ writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
+ while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
+ if (readl(USB_PORTSC) & PORTSC_PHCD)
+ break;
+ udelay(1);
+ cnt++;
+ }
+ if (cnt >= PHY_SUSPEND_TIMEOUT_USEC)
+ dev_err(phy->dev, "Unable to suspend PHY\n");
+
+ clk_disable_unprepare(motg->pclk);
+ clk_disable_unprepare(motg->clk);
+ if (!IS_ERR(motg->core_clk))
+ clk_disable_unprepare(motg->core_clk);
+ msm_hsusb_ldo_init(motg, 0);
+
+ pm_runtime_set_suspended(&pdev->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int msm_otg_runtime_idle(struct device *dev)
+{
+ struct msm_otg *motg = dev_get_drvdata(dev);
+ struct usb_otg *otg = motg->phy.otg;
+
+ dev_dbg(dev, "OTG runtime idle\n");
+
+ /*
+ * It is observed some times that a spurious interrupt
+ * comes when PHY is put into LPM immediately after PHY reset.
+ * This 1 sec delay also prevents entering into LPM immediately
+ * after asynchronous interrupt.
+ */
+ if (otg->state != OTG_STATE_UNDEFINED)
+ pm_schedule_suspend(dev, 1000);
+
+ return -EAGAIN;
+}
+
+static int msm_otg_runtime_suspend(struct device *dev)
+{
+ struct msm_otg *motg = dev_get_drvdata(dev);
+
+ dev_dbg(dev, "OTG runtime suspend\n");
+ return msm_otg_suspend(motg);
+}
+
+static int msm_otg_runtime_resume(struct device *dev)
+{
+ struct msm_otg *motg = dev_get_drvdata(dev);
+
+ dev_dbg(dev, "OTG runtime resume\n");
+ return msm_otg_resume(motg);
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+static int msm_otg_pm_suspend(struct device *dev)
+{
+ struct msm_otg *motg = dev_get_drvdata(dev);
+
+ dev_dbg(dev, "OTG PM suspend\n");
+ return msm_otg_suspend(motg);
+}
+
+static int msm_otg_pm_resume(struct device *dev)
+{
+ struct msm_otg *motg = dev_get_drvdata(dev);
+ int ret;
+
+ dev_dbg(dev, "OTG PM resume\n");
+
+ ret = msm_otg_resume(motg);
+ if (ret)
+ return ret;
+
+ /*
+ * Runtime PM Documentation recommends bringing the
+ * device to full powered state upon resume.
+ */
+ pm_runtime_disable(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops msm_otg_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume)
+ SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume,
+ msm_otg_runtime_idle)
+};
+
+static struct platform_driver msm_otg_driver = {
+ .probe = msm_otg_probe,
+ .remove = msm_otg_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .pm = &msm_otg_dev_pm_ops,
+ .of_match_table = msm_otg_dt_match,
+ },
+};
+
+module_platform_driver(msm_otg_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MSM USB transceiver driver");
diff --git a/kernel/drivers/usb/phy/phy-mv-usb.c b/kernel/drivers/usb/phy/phy-mv-usb.c
new file mode 100644
index 000000000..697a741a0
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-mv-usb.c
@@ -0,0 +1,905 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ * Author: Chao Xie <chao.xie@marvell.com>
+ * Neil Zhang <zhangwm@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/device.h>
+#include <linux/proc_fs.h>
+#include <linux/clk.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+
+#include <linux/usb.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/hcd.h>
+#include <linux/platform_data/mv_usb.h>
+
+#include "phy-mv-usb.h"
+
+#define DRIVER_DESC "Marvell USB OTG transceiver driver"
+#define DRIVER_VERSION "Jan 20, 2010"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+static const char driver_name[] = "mv-otg";
+
+static char *state_string[] = {
+ "undefined",
+ "b_idle",
+ "b_srp_init",
+ "b_peripheral",
+ "b_wait_acon",
+ "b_host",
+ "a_idle",
+ "a_wait_vrise",
+ "a_wait_bcon",
+ "a_host",
+ "a_suspend",
+ "a_peripheral",
+ "a_wait_vfall",
+ "a_vbus_err"
+};
+
+static int mv_otg_set_vbus(struct usb_otg *otg, bool on)
+{
+ struct mv_otg *mvotg = container_of(otg->usb_phy, struct mv_otg, phy);
+ if (mvotg->pdata->set_vbus == NULL)
+ return -ENODEV;
+
+ return mvotg->pdata->set_vbus(on);
+}
+
+static int mv_otg_set_host(struct usb_otg *otg,
+ struct usb_bus *host)
+{
+ otg->host = host;
+
+ return 0;
+}
+
+static int mv_otg_set_peripheral(struct usb_otg *otg,
+ struct usb_gadget *gadget)
+{
+ otg->gadget = gadget;
+
+ return 0;
+}
+
+static void mv_otg_run_state_machine(struct mv_otg *mvotg,
+ unsigned long delay)
+{
+ dev_dbg(&mvotg->pdev->dev, "transceiver is updated\n");
+ if (!mvotg->qwork)
+ return;
+
+ queue_delayed_work(mvotg->qwork, &mvotg->work, delay);
+}
+
+static void mv_otg_timer_await_bcon(unsigned long data)
+{
+ struct mv_otg *mvotg = (struct mv_otg *) data;
+
+ mvotg->otg_ctrl.a_wait_bcon_timeout = 1;
+
+ dev_info(&mvotg->pdev->dev, "B Device No Response!\n");
+
+ if (spin_trylock(&mvotg->wq_lock)) {
+ mv_otg_run_state_machine(mvotg, 0);
+ spin_unlock(&mvotg->wq_lock);
+ }
+}
+
+static int mv_otg_cancel_timer(struct mv_otg *mvotg, unsigned int id)
+{
+ struct timer_list *timer;
+
+ if (id >= OTG_TIMER_NUM)
+ return -EINVAL;
+
+ timer = &mvotg->otg_ctrl.timer[id];
+
+ if (timer_pending(timer))
+ del_timer(timer);
+
+ return 0;
+}
+
+static int mv_otg_set_timer(struct mv_otg *mvotg, unsigned int id,
+ unsigned long interval,
+ void (*callback) (unsigned long))
+{
+ struct timer_list *timer;
+
+ if (id >= OTG_TIMER_NUM)
+ return -EINVAL;
+
+ timer = &mvotg->otg_ctrl.timer[id];
+ if (timer_pending(timer)) {
+ dev_err(&mvotg->pdev->dev, "Timer%d is already running\n", id);
+ return -EBUSY;
+ }
+
+ init_timer(timer);
+ timer->data = (unsigned long) mvotg;
+ timer->function = callback;
+ timer->expires = jiffies + interval;
+ add_timer(timer);
+
+ return 0;
+}
+
+static int mv_otg_reset(struct mv_otg *mvotg)
+{
+ unsigned int loops;
+ u32 tmp;
+
+ /* Stop the controller */
+ tmp = readl(&mvotg->op_regs->usbcmd);
+ tmp &= ~USBCMD_RUN_STOP;
+ writel(tmp, &mvotg->op_regs->usbcmd);
+
+ /* Reset the controller to get default values */
+ writel(USBCMD_CTRL_RESET, &mvotg->op_regs->usbcmd);
+
+ loops = 500;
+ while (readl(&mvotg->op_regs->usbcmd) & USBCMD_CTRL_RESET) {
+ if (loops == 0) {
+ dev_err(&mvotg->pdev->dev,
+ "Wait for RESET completed TIMEOUT\n");
+ return -ETIMEDOUT;
+ }
+ loops--;
+ udelay(20);
+ }
+
+ writel(0x0, &mvotg->op_regs->usbintr);
+ tmp = readl(&mvotg->op_regs->usbsts);
+ writel(tmp, &mvotg->op_regs->usbsts);
+
+ return 0;
+}
+
+static void mv_otg_init_irq(struct mv_otg *mvotg)
+{
+ u32 otgsc;
+
+ mvotg->irq_en = OTGSC_INTR_A_SESSION_VALID
+ | OTGSC_INTR_A_VBUS_VALID;
+ mvotg->irq_status = OTGSC_INTSTS_A_SESSION_VALID
+ | OTGSC_INTSTS_A_VBUS_VALID;
+
+ if (mvotg->pdata->vbus == NULL) {
+ mvotg->irq_en |= OTGSC_INTR_B_SESSION_VALID
+ | OTGSC_INTR_B_SESSION_END;
+ mvotg->irq_status |= OTGSC_INTSTS_B_SESSION_VALID
+ | OTGSC_INTSTS_B_SESSION_END;
+ }
+
+ if (mvotg->pdata->id == NULL) {
+ mvotg->irq_en |= OTGSC_INTR_USB_ID;
+ mvotg->irq_status |= OTGSC_INTSTS_USB_ID;
+ }
+
+ otgsc = readl(&mvotg->op_regs->otgsc);
+ otgsc |= mvotg->irq_en;
+ writel(otgsc, &mvotg->op_regs->otgsc);
+}
+
+static void mv_otg_start_host(struct mv_otg *mvotg, int on)
+{
+#ifdef CONFIG_USB
+ struct usb_otg *otg = mvotg->phy.otg;
+ struct usb_hcd *hcd;
+
+ if (!otg->host)
+ return;
+
+ dev_info(&mvotg->pdev->dev, "%s host\n", on ? "start" : "stop");
+
+ hcd = bus_to_hcd(otg->host);
+
+ if (on) {
+ usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
+ device_wakeup_enable(hcd->self.controller);
+ } else {
+ usb_remove_hcd(hcd);
+ }
+#endif /* CONFIG_USB */
+}
+
+static void mv_otg_start_periphrals(struct mv_otg *mvotg, int on)
+{
+ struct usb_otg *otg = mvotg->phy.otg;
+
+ if (!otg->gadget)
+ return;
+
+ dev_info(mvotg->phy.dev, "gadget %s\n", on ? "on" : "off");
+
+ if (on)
+ usb_gadget_vbus_connect(otg->gadget);
+ else
+ usb_gadget_vbus_disconnect(otg->gadget);
+}
+
+static void otg_clock_enable(struct mv_otg *mvotg)
+{
+ clk_prepare_enable(mvotg->clk);
+}
+
+static void otg_clock_disable(struct mv_otg *mvotg)
+{
+ clk_disable_unprepare(mvotg->clk);
+}
+
+static int mv_otg_enable_internal(struct mv_otg *mvotg)
+{
+ int retval = 0;
+
+ if (mvotg->active)
+ return 0;
+
+ dev_dbg(&mvotg->pdev->dev, "otg enabled\n");
+
+ otg_clock_enable(mvotg);
+ if (mvotg->pdata->phy_init) {
+ retval = mvotg->pdata->phy_init(mvotg->phy_regs);
+ if (retval) {
+ dev_err(&mvotg->pdev->dev,
+ "init phy error %d\n", retval);
+ otg_clock_disable(mvotg);
+ return retval;
+ }
+ }
+ mvotg->active = 1;
+
+ return 0;
+
+}
+
+static int mv_otg_enable(struct mv_otg *mvotg)
+{
+ if (mvotg->clock_gating)
+ return mv_otg_enable_internal(mvotg);
+
+ return 0;
+}
+
+static void mv_otg_disable_internal(struct mv_otg *mvotg)
+{
+ if (mvotg->active) {
+ dev_dbg(&mvotg->pdev->dev, "otg disabled\n");
+ if (mvotg->pdata->phy_deinit)
+ mvotg->pdata->phy_deinit(mvotg->phy_regs);
+ otg_clock_disable(mvotg);
+ mvotg->active = 0;
+ }
+}
+
+static void mv_otg_disable(struct mv_otg *mvotg)
+{
+ if (mvotg->clock_gating)
+ mv_otg_disable_internal(mvotg);
+}
+
+static void mv_otg_update_inputs(struct mv_otg *mvotg)
+{
+ struct mv_otg_ctrl *otg_ctrl = &mvotg->otg_ctrl;
+ u32 otgsc;
+
+ otgsc = readl(&mvotg->op_regs->otgsc);
+
+ if (mvotg->pdata->vbus) {
+ if (mvotg->pdata->vbus->poll() == VBUS_HIGH) {
+ otg_ctrl->b_sess_vld = 1;
+ otg_ctrl->b_sess_end = 0;
+ } else {
+ otg_ctrl->b_sess_vld = 0;
+ otg_ctrl->b_sess_end = 1;
+ }
+ } else {
+ otg_ctrl->b_sess_vld = !!(otgsc & OTGSC_STS_B_SESSION_VALID);
+ otg_ctrl->b_sess_end = !!(otgsc & OTGSC_STS_B_SESSION_END);
+ }
+
+ if (mvotg->pdata->id)
+ otg_ctrl->id = !!mvotg->pdata->id->poll();
+ else
+ otg_ctrl->id = !!(otgsc & OTGSC_STS_USB_ID);
+
+ if (mvotg->pdata->otg_force_a_bus_req && !otg_ctrl->id)
+ otg_ctrl->a_bus_req = 1;
+
+ otg_ctrl->a_sess_vld = !!(otgsc & OTGSC_STS_A_SESSION_VALID);
+ otg_ctrl->a_vbus_vld = !!(otgsc & OTGSC_STS_A_VBUS_VALID);
+
+ dev_dbg(&mvotg->pdev->dev, "%s: ", __func__);
+ dev_dbg(&mvotg->pdev->dev, "id %d\n", otg_ctrl->id);
+ dev_dbg(&mvotg->pdev->dev, "b_sess_vld %d\n", otg_ctrl->b_sess_vld);
+ dev_dbg(&mvotg->pdev->dev, "b_sess_end %d\n", otg_ctrl->b_sess_end);
+ dev_dbg(&mvotg->pdev->dev, "a_vbus_vld %d\n", otg_ctrl->a_vbus_vld);
+ dev_dbg(&mvotg->pdev->dev, "a_sess_vld %d\n", otg_ctrl->a_sess_vld);
+}
+
+static void mv_otg_update_state(struct mv_otg *mvotg)
+{
+ struct mv_otg_ctrl *otg_ctrl = &mvotg->otg_ctrl;
+ int old_state = mvotg->phy.otg->state;
+
+ switch (old_state) {
+ case OTG_STATE_UNDEFINED:
+ mvotg->phy.otg->state = OTG_STATE_B_IDLE;
+ /* FALL THROUGH */
+ case OTG_STATE_B_IDLE:
+ if (otg_ctrl->id == 0)
+ mvotg->phy.otg->state = OTG_STATE_A_IDLE;
+ else if (otg_ctrl->b_sess_vld)
+ mvotg->phy.otg->state = OTG_STATE_B_PERIPHERAL;
+ break;
+ case OTG_STATE_B_PERIPHERAL:
+ if (!otg_ctrl->b_sess_vld || otg_ctrl->id == 0)
+ mvotg->phy.otg->state = OTG_STATE_B_IDLE;
+ break;
+ case OTG_STATE_A_IDLE:
+ if (otg_ctrl->id)
+ mvotg->phy.otg->state = OTG_STATE_B_IDLE;
+ else if (!(otg_ctrl->a_bus_drop) &&
+ (otg_ctrl->a_bus_req || otg_ctrl->a_srp_det))
+ mvotg->phy.otg->state = OTG_STATE_A_WAIT_VRISE;
+ break;
+ case OTG_STATE_A_WAIT_VRISE:
+ if (otg_ctrl->a_vbus_vld)
+ mvotg->phy.otg->state = OTG_STATE_A_WAIT_BCON;
+ break;
+ case OTG_STATE_A_WAIT_BCON:
+ if (otg_ctrl->id || otg_ctrl->a_bus_drop
+ || otg_ctrl->a_wait_bcon_timeout) {
+ mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
+ mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
+ mvotg->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
+ otg_ctrl->a_bus_req = 0;
+ } else if (!otg_ctrl->a_vbus_vld) {
+ mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
+ mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
+ mvotg->phy.otg->state = OTG_STATE_A_VBUS_ERR;
+ } else if (otg_ctrl->b_conn) {
+ mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER);
+ mvotg->otg_ctrl.a_wait_bcon_timeout = 0;
+ mvotg->phy.otg->state = OTG_STATE_A_HOST;
+ }
+ break;
+ case OTG_STATE_A_HOST:
+ if (otg_ctrl->id || !otg_ctrl->b_conn
+ || otg_ctrl->a_bus_drop)
+ mvotg->phy.otg->state = OTG_STATE_A_WAIT_BCON;
+ else if (!otg_ctrl->a_vbus_vld)
+ mvotg->phy.otg->state = OTG_STATE_A_VBUS_ERR;
+ break;
+ case OTG_STATE_A_WAIT_VFALL:
+ if (otg_ctrl->id
+ || (!otg_ctrl->b_conn && otg_ctrl->a_sess_vld)
+ || otg_ctrl->a_bus_req)
+ mvotg->phy.otg->state = OTG_STATE_A_IDLE;
+ break;
+ case OTG_STATE_A_VBUS_ERR:
+ if (otg_ctrl->id || otg_ctrl->a_clr_err
+ || otg_ctrl->a_bus_drop) {
+ otg_ctrl->a_clr_err = 0;
+ mvotg->phy.otg->state = OTG_STATE_A_WAIT_VFALL;
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+static void mv_otg_work(struct work_struct *work)
+{
+ struct mv_otg *mvotg;
+ struct usb_phy *phy;
+ struct usb_otg *otg;
+ int old_state;
+
+ mvotg = container_of(to_delayed_work(work), struct mv_otg, work);
+
+run:
+ /* work queue is single thread, or we need spin_lock to protect */
+ phy = &mvotg->phy;
+ otg = mvotg->phy.otg;
+ old_state = otg->state;
+
+ if (!mvotg->active)
+ return;
+
+ mv_otg_update_inputs(mvotg);
+ mv_otg_update_state(mvotg);
+
+ if (old_state != mvotg->phy.otg->state) {
+ dev_info(&mvotg->pdev->dev, "change from state %s to %s\n",
+ state_string[old_state],
+ state_string[mvotg->phy.otg->state]);
+
+ switch (mvotg->phy.otg->state) {
+ case OTG_STATE_B_IDLE:
+ otg->default_a = 0;
+ if (old_state == OTG_STATE_B_PERIPHERAL)
+ mv_otg_start_periphrals(mvotg, 0);
+ mv_otg_reset(mvotg);
+ mv_otg_disable(mvotg);
+ usb_phy_set_event(&mvotg->phy, USB_EVENT_NONE);
+ break;
+ case OTG_STATE_B_PERIPHERAL:
+ mv_otg_enable(mvotg);
+ mv_otg_start_periphrals(mvotg, 1);
+ usb_phy_set_event(&mvotg->phy, USB_EVENT_ENUMERATED);
+ break;
+ case OTG_STATE_A_IDLE:
+ otg->default_a = 1;
+ mv_otg_enable(mvotg);
+ if (old_state == OTG_STATE_A_WAIT_VFALL)
+ mv_otg_start_host(mvotg, 0);
+ mv_otg_reset(mvotg);
+ break;
+ case OTG_STATE_A_WAIT_VRISE:
+ mv_otg_set_vbus(otg, 1);
+ break;
+ case OTG_STATE_A_WAIT_BCON:
+ if (old_state != OTG_STATE_A_HOST)
+ mv_otg_start_host(mvotg, 1);
+ mv_otg_set_timer(mvotg, A_WAIT_BCON_TIMER,
+ T_A_WAIT_BCON,
+ mv_otg_timer_await_bcon);
+ /*
+ * Now, we directly enter A_HOST. So set b_conn = 1
+ * here. In fact, it need host driver to notify us.
+ */
+ mvotg->otg_ctrl.b_conn = 1;
+ break;
+ case OTG_STATE_A_HOST:
+ break;
+ case OTG_STATE_A_WAIT_VFALL:
+ /*
+ * Now, we has exited A_HOST. So set b_conn = 0
+ * here. In fact, it need host driver to notify us.
+ */
+ mvotg->otg_ctrl.b_conn = 0;
+ mv_otg_set_vbus(otg, 0);
+ break;
+ case OTG_STATE_A_VBUS_ERR:
+ break;
+ default:
+ break;
+ }
+ goto run;
+ }
+}
+
+static irqreturn_t mv_otg_irq(int irq, void *dev)
+{
+ struct mv_otg *mvotg = dev;
+ u32 otgsc;
+
+ otgsc = readl(&mvotg->op_regs->otgsc);
+ writel(otgsc, &mvotg->op_regs->otgsc);
+
+ /*
+ * if we have vbus, then the vbus detection for B-device
+ * will be done by mv_otg_inputs_irq().
+ */
+ if (mvotg->pdata->vbus)
+ if ((otgsc & OTGSC_STS_USB_ID) &&
+ !(otgsc & OTGSC_INTSTS_USB_ID))
+ return IRQ_NONE;
+
+ if ((otgsc & mvotg->irq_status) == 0)
+ return IRQ_NONE;
+
+ mv_otg_run_state_machine(mvotg, 0);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t mv_otg_inputs_irq(int irq, void *dev)
+{
+ struct mv_otg *mvotg = dev;
+
+ /* The clock may disabled at this time */
+ if (!mvotg->active) {
+ mv_otg_enable(mvotg);
+ mv_otg_init_irq(mvotg);
+ }
+
+ mv_otg_run_state_machine(mvotg, 0);
+
+ return IRQ_HANDLED;
+}
+
+static ssize_t
+get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct mv_otg *mvotg = dev_get_drvdata(dev);
+ return scnprintf(buf, PAGE_SIZE, "%d\n",
+ mvotg->otg_ctrl.a_bus_req);
+}
+
+static ssize_t
+set_a_bus_req(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct mv_otg *mvotg = dev_get_drvdata(dev);
+
+ if (count > 2)
+ return -1;
+
+ /* We will use this interface to change to A device */
+ if (mvotg->phy.otg->state != OTG_STATE_B_IDLE
+ && mvotg->phy.otg->state != OTG_STATE_A_IDLE)
+ return -1;
+
+ /* The clock may disabled and we need to set irq for ID detected */
+ mv_otg_enable(mvotg);
+ mv_otg_init_irq(mvotg);
+
+ if (buf[0] == '1') {
+ mvotg->otg_ctrl.a_bus_req = 1;
+ mvotg->otg_ctrl.a_bus_drop = 0;
+ dev_dbg(&mvotg->pdev->dev,
+ "User request: a_bus_req = 1\n");
+
+ if (spin_trylock(&mvotg->wq_lock)) {
+ mv_otg_run_state_machine(mvotg, 0);
+ spin_unlock(&mvotg->wq_lock);
+ }
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req,
+ set_a_bus_req);
+
+static ssize_t
+set_a_clr_err(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct mv_otg *mvotg = dev_get_drvdata(dev);
+ if (!mvotg->phy.otg->default_a)
+ return -1;
+
+ if (count > 2)
+ return -1;
+
+ if (buf[0] == '1') {
+ mvotg->otg_ctrl.a_clr_err = 1;
+ dev_dbg(&mvotg->pdev->dev,
+ "User request: a_clr_err = 1\n");
+ }
+
+ if (spin_trylock(&mvotg->wq_lock)) {
+ mv_otg_run_state_machine(mvotg, 0);
+ spin_unlock(&mvotg->wq_lock);
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err);
+
+static ssize_t
+get_a_bus_drop(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct mv_otg *mvotg = dev_get_drvdata(dev);
+ return scnprintf(buf, PAGE_SIZE, "%d\n",
+ mvotg->otg_ctrl.a_bus_drop);
+}
+
+static ssize_t
+set_a_bus_drop(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct mv_otg *mvotg = dev_get_drvdata(dev);
+ if (!mvotg->phy.otg->default_a)
+ return -1;
+
+ if (count > 2)
+ return -1;
+
+ if (buf[0] == '0') {
+ mvotg->otg_ctrl.a_bus_drop = 0;
+ dev_dbg(&mvotg->pdev->dev,
+ "User request: a_bus_drop = 0\n");
+ } else if (buf[0] == '1') {
+ mvotg->otg_ctrl.a_bus_drop = 1;
+ mvotg->otg_ctrl.a_bus_req = 0;
+ dev_dbg(&mvotg->pdev->dev,
+ "User request: a_bus_drop = 1\n");
+ dev_dbg(&mvotg->pdev->dev,
+ "User request: and a_bus_req = 0\n");
+ }
+
+ if (spin_trylock(&mvotg->wq_lock)) {
+ mv_otg_run_state_machine(mvotg, 0);
+ spin_unlock(&mvotg->wq_lock);
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR,
+ get_a_bus_drop, set_a_bus_drop);
+
+static struct attribute *inputs_attrs[] = {
+ &dev_attr_a_bus_req.attr,
+ &dev_attr_a_clr_err.attr,
+ &dev_attr_a_bus_drop.attr,
+ NULL,
+};
+
+static struct attribute_group inputs_attr_group = {
+ .name = "inputs",
+ .attrs = inputs_attrs,
+};
+
+static int mv_otg_remove(struct platform_device *pdev)
+{
+ struct mv_otg *mvotg = platform_get_drvdata(pdev);
+
+ sysfs_remove_group(&mvotg->pdev->dev.kobj, &inputs_attr_group);
+
+ if (mvotg->qwork) {
+ flush_workqueue(mvotg->qwork);
+ destroy_workqueue(mvotg->qwork);
+ }
+
+ mv_otg_disable(mvotg);
+
+ usb_remove_phy(&mvotg->phy);
+
+ return 0;
+}
+
+static int mv_otg_probe(struct platform_device *pdev)
+{
+ struct mv_usb_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct mv_otg *mvotg;
+ struct usb_otg *otg;
+ struct resource *r;
+ int retval = 0, i;
+
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "failed to get platform data\n");
+ return -ENODEV;
+ }
+
+ mvotg = devm_kzalloc(&pdev->dev, sizeof(*mvotg), GFP_KERNEL);
+ if (!mvotg)
+ return -ENOMEM;
+
+ otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+ if (!otg)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, mvotg);
+
+ mvotg->pdev = pdev;
+ mvotg->pdata = pdata;
+
+ mvotg->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(mvotg->clk))
+ return PTR_ERR(mvotg->clk);
+
+ mvotg->qwork = create_singlethread_workqueue("mv_otg_queue");
+ if (!mvotg->qwork) {
+ dev_dbg(&pdev->dev, "cannot create workqueue for OTG\n");
+ return -ENOMEM;
+ }
+
+ INIT_DELAYED_WORK(&mvotg->work, mv_otg_work);
+
+ /* OTG common part */
+ mvotg->pdev = pdev;
+ mvotg->phy.dev = &pdev->dev;
+ mvotg->phy.otg = otg;
+ mvotg->phy.label = driver_name;
+
+ otg->state = OTG_STATE_UNDEFINED;
+ otg->usb_phy = &mvotg->phy;
+ otg->set_host = mv_otg_set_host;
+ otg->set_peripheral = mv_otg_set_peripheral;
+ otg->set_vbus = mv_otg_set_vbus;
+
+ for (i = 0; i < OTG_TIMER_NUM; i++)
+ init_timer(&mvotg->otg_ctrl.timer[i]);
+
+ r = platform_get_resource_byname(mvotg->pdev,
+ IORESOURCE_MEM, "phyregs");
+ if (r == NULL) {
+ dev_err(&pdev->dev, "no phy I/O memory resource defined\n");
+ retval = -ENODEV;
+ goto err_destroy_workqueue;
+ }
+
+ mvotg->phy_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+ if (mvotg->phy_regs == NULL) {
+ dev_err(&pdev->dev, "failed to map phy I/O memory\n");
+ retval = -EFAULT;
+ goto err_destroy_workqueue;
+ }
+
+ r = platform_get_resource_byname(mvotg->pdev,
+ IORESOURCE_MEM, "capregs");
+ if (r == NULL) {
+ dev_err(&pdev->dev, "no I/O memory resource defined\n");
+ retval = -ENODEV;
+ goto err_destroy_workqueue;
+ }
+
+ mvotg->cap_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+ if (mvotg->cap_regs == NULL) {
+ dev_err(&pdev->dev, "failed to map I/O memory\n");
+ retval = -EFAULT;
+ goto err_destroy_workqueue;
+ }
+
+ /* we will acces controller register, so enable the udc controller */
+ retval = mv_otg_enable_internal(mvotg);
+ if (retval) {
+ dev_err(&pdev->dev, "mv otg enable error %d\n", retval);
+ goto err_destroy_workqueue;
+ }
+
+ mvotg->op_regs =
+ (struct mv_otg_regs __iomem *) ((unsigned long) mvotg->cap_regs
+ + (readl(mvotg->cap_regs) & CAPLENGTH_MASK));
+
+ if (pdata->id) {
+ retval = devm_request_threaded_irq(&pdev->dev, pdata->id->irq,
+ NULL, mv_otg_inputs_irq,
+ IRQF_ONESHOT, "id", mvotg);
+ if (retval) {
+ dev_info(&pdev->dev,
+ "Failed to request irq for ID\n");
+ pdata->id = NULL;
+ }
+ }
+
+ if (pdata->vbus) {
+ mvotg->clock_gating = 1;
+ retval = devm_request_threaded_irq(&pdev->dev, pdata->vbus->irq,
+ NULL, mv_otg_inputs_irq,
+ IRQF_ONESHOT, "vbus", mvotg);
+ if (retval) {
+ dev_info(&pdev->dev,
+ "Failed to request irq for VBUS, "
+ "disable clock gating\n");
+ mvotg->clock_gating = 0;
+ pdata->vbus = NULL;
+ }
+ }
+
+ if (pdata->disable_otg_clock_gating)
+ mvotg->clock_gating = 0;
+
+ mv_otg_reset(mvotg);
+ mv_otg_init_irq(mvotg);
+
+ r = platform_get_resource(mvotg->pdev, IORESOURCE_IRQ, 0);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "no IRQ resource defined\n");
+ retval = -ENODEV;
+ goto err_disable_clk;
+ }
+
+ mvotg->irq = r->start;
+ if (devm_request_irq(&pdev->dev, mvotg->irq, mv_otg_irq, IRQF_SHARED,
+ driver_name, mvotg)) {
+ dev_err(&pdev->dev, "Request irq %d for OTG failed\n",
+ mvotg->irq);
+ mvotg->irq = 0;
+ retval = -ENODEV;
+ goto err_disable_clk;
+ }
+
+ retval = usb_add_phy(&mvotg->phy, USB_PHY_TYPE_USB2);
+ if (retval < 0) {
+ dev_err(&pdev->dev, "can't register transceiver, %d\n",
+ retval);
+ goto err_disable_clk;
+ }
+
+ retval = sysfs_create_group(&pdev->dev.kobj, &inputs_attr_group);
+ if (retval < 0) {
+ dev_dbg(&pdev->dev,
+ "Can't register sysfs attr group: %d\n", retval);
+ goto err_remove_phy;
+ }
+
+ spin_lock_init(&mvotg->wq_lock);
+ if (spin_trylock(&mvotg->wq_lock)) {
+ mv_otg_run_state_machine(mvotg, 2 * HZ);
+ spin_unlock(&mvotg->wq_lock);
+ }
+
+ dev_info(&pdev->dev,
+ "successful probe OTG device %s clock gating.\n",
+ mvotg->clock_gating ? "with" : "without");
+
+ return 0;
+
+err_remove_phy:
+ usb_remove_phy(&mvotg->phy);
+err_disable_clk:
+ mv_otg_disable_internal(mvotg);
+err_destroy_workqueue:
+ flush_workqueue(mvotg->qwork);
+ destroy_workqueue(mvotg->qwork);
+
+ return retval;
+}
+
+#ifdef CONFIG_PM
+static int mv_otg_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct mv_otg *mvotg = platform_get_drvdata(pdev);
+
+ if (mvotg->phy.otg->state != OTG_STATE_B_IDLE) {
+ dev_info(&pdev->dev,
+ "OTG state is not B_IDLE, it is %d!\n",
+ mvotg->phy.otg->state);
+ return -EAGAIN;
+ }
+
+ if (!mvotg->clock_gating)
+ mv_otg_disable_internal(mvotg);
+
+ return 0;
+}
+
+static int mv_otg_resume(struct platform_device *pdev)
+{
+ struct mv_otg *mvotg = platform_get_drvdata(pdev);
+ u32 otgsc;
+
+ if (!mvotg->clock_gating) {
+ mv_otg_enable_internal(mvotg);
+
+ otgsc = readl(&mvotg->op_regs->otgsc);
+ otgsc |= mvotg->irq_en;
+ writel(otgsc, &mvotg->op_regs->otgsc);
+
+ if (spin_trylock(&mvotg->wq_lock)) {
+ mv_otg_run_state_machine(mvotg, 0);
+ spin_unlock(&mvotg->wq_lock);
+ }
+ }
+ return 0;
+}
+#endif
+
+static struct platform_driver mv_otg_driver = {
+ .probe = mv_otg_probe,
+ .remove = mv_otg_remove,
+ .driver = {
+ .name = driver_name,
+ },
+#ifdef CONFIG_PM
+ .suspend = mv_otg_suspend,
+ .resume = mv_otg_resume,
+#endif
+};
+module_platform_driver(mv_otg_driver);
diff --git a/kernel/drivers/usb/phy/phy-mv-usb.h b/kernel/drivers/usb/phy/phy-mv-usb.h
new file mode 100644
index 000000000..551da6eb0
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-mv-usb.h
@@ -0,0 +1,164 @@
+/*
+ * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MV_USB_OTG_CONTROLLER__
+#define __MV_USB_OTG_CONTROLLER__
+
+#include <linux/types.h>
+
+/* Command Register Bit Masks */
+#define USBCMD_RUN_STOP (0x00000001)
+#define USBCMD_CTRL_RESET (0x00000002)
+
+/* otgsc Register Bit Masks */
+#define OTGSC_CTRL_VUSB_DISCHARGE 0x00000001
+#define OTGSC_CTRL_VUSB_CHARGE 0x00000002
+#define OTGSC_CTRL_OTG_TERM 0x00000008
+#define OTGSC_CTRL_DATA_PULSING 0x00000010
+#define OTGSC_STS_USB_ID 0x00000100
+#define OTGSC_STS_A_VBUS_VALID 0x00000200
+#define OTGSC_STS_A_SESSION_VALID 0x00000400
+#define OTGSC_STS_B_SESSION_VALID 0x00000800
+#define OTGSC_STS_B_SESSION_END 0x00001000
+#define OTGSC_STS_1MS_TOGGLE 0x00002000
+#define OTGSC_STS_DATA_PULSING 0x00004000
+#define OTGSC_INTSTS_USB_ID 0x00010000
+#define OTGSC_INTSTS_A_VBUS_VALID 0x00020000
+#define OTGSC_INTSTS_A_SESSION_VALID 0x00040000
+#define OTGSC_INTSTS_B_SESSION_VALID 0x00080000
+#define OTGSC_INTSTS_B_SESSION_END 0x00100000
+#define OTGSC_INTSTS_1MS 0x00200000
+#define OTGSC_INTSTS_DATA_PULSING 0x00400000
+#define OTGSC_INTR_USB_ID 0x01000000
+#define OTGSC_INTR_A_VBUS_VALID 0x02000000
+#define OTGSC_INTR_A_SESSION_VALID 0x04000000
+#define OTGSC_INTR_B_SESSION_VALID 0x08000000
+#define OTGSC_INTR_B_SESSION_END 0x10000000
+#define OTGSC_INTR_1MS_TIMER 0x20000000
+#define OTGSC_INTR_DATA_PULSING 0x40000000
+
+#define CAPLENGTH_MASK (0xff)
+
+/* Timer's interval, unit 10ms */
+#define T_A_WAIT_VRISE 100
+#define T_A_WAIT_BCON 2000
+#define T_A_AIDL_BDIS 100
+#define T_A_BIDL_ADIS 20
+#define T_B_ASE0_BRST 400
+#define T_B_SE0_SRP 300
+#define T_B_SRP_FAIL 2000
+#define T_B_DATA_PLS 10
+#define T_B_SRP_INIT 100
+#define T_A_SRP_RSPNS 10
+#define T_A_DRV_RSM 5
+
+enum otg_function {
+ OTG_B_DEVICE = 0,
+ OTG_A_DEVICE
+};
+
+enum mv_otg_timer {
+ A_WAIT_BCON_TIMER = 0,
+ OTG_TIMER_NUM
+};
+
+/* PXA OTG state machine */
+struct mv_otg_ctrl {
+ /* internal variables */
+ u8 a_set_b_hnp_en; /* A-Device set b_hnp_en */
+ u8 b_srp_done;
+ u8 b_hnp_en;
+
+ /* OTG inputs */
+ u8 a_bus_drop;
+ u8 a_bus_req;
+ u8 a_clr_err;
+ u8 a_bus_resume;
+ u8 a_bus_suspend;
+ u8 a_conn;
+ u8 a_sess_vld;
+ u8 a_srp_det;
+ u8 a_vbus_vld;
+ u8 b_bus_req; /* B-Device Require Bus */
+ u8 b_bus_resume;
+ u8 b_bus_suspend;
+ u8 b_conn;
+ u8 b_se0_srp;
+ u8 b_sess_end;
+ u8 b_sess_vld;
+ u8 id;
+ u8 a_suspend_req;
+
+ /*Timer event */
+ u8 a_aidl_bdis_timeout;
+ u8 b_ase0_brst_timeout;
+ u8 a_bidl_adis_timeout;
+ u8 a_wait_bcon_timeout;
+
+ struct timer_list timer[OTG_TIMER_NUM];
+};
+
+#define VUSBHS_MAX_PORTS 8
+
+struct mv_otg_regs {
+ u32 usbcmd; /* Command register */
+ u32 usbsts; /* Status register */
+ u32 usbintr; /* Interrupt enable */
+ u32 frindex; /* Frame index */
+ u32 reserved1[1];
+ u32 deviceaddr; /* Device Address */
+ u32 eplistaddr; /* Endpoint List Address */
+ u32 ttctrl; /* HOST TT status and control */
+ u32 burstsize; /* Programmable Burst Size */
+ u32 txfilltuning; /* Host Transmit Pre-Buffer Packet Tuning */
+ u32 reserved[4];
+ u32 epnak; /* Endpoint NAK */
+ u32 epnaken; /* Endpoint NAK Enable */
+ u32 configflag; /* Configured Flag register */
+ u32 portsc[VUSBHS_MAX_PORTS]; /* Port Status/Control x, x = 1..8 */
+ u32 otgsc;
+ u32 usbmode; /* USB Host/Device mode */
+ u32 epsetupstat; /* Endpoint Setup Status */
+ u32 epprime; /* Endpoint Initialize */
+ u32 epflush; /* Endpoint De-initialize */
+ u32 epstatus; /* Endpoint Status */
+ u32 epcomplete; /* Endpoint Interrupt On Complete */
+ u32 epctrlx[16]; /* Endpoint Control, where x = 0.. 15 */
+ u32 mcr; /* Mux Control */
+ u32 isr; /* Interrupt Status */
+ u32 ier; /* Interrupt Enable */
+};
+
+struct mv_otg {
+ struct usb_phy phy;
+ struct mv_otg_ctrl otg_ctrl;
+
+ /* base address */
+ void __iomem *phy_regs;
+ void __iomem *cap_regs;
+ struct mv_otg_regs __iomem *op_regs;
+
+ struct platform_device *pdev;
+ int irq;
+ u32 irq_status;
+ u32 irq_en;
+
+ struct delayed_work work;
+ struct workqueue_struct *qwork;
+
+ spinlock_t wq_lock;
+
+ struct mv_usb_platform_data *pdata;
+
+ unsigned int active;
+ unsigned int clock_gating;
+ struct clk *clk;
+};
+
+#endif
diff --git a/kernel/drivers/usb/phy/phy-mxs-usb.c b/kernel/drivers/usb/phy/phy-mxs-usb.c
new file mode 100644
index 000000000..8f7cb068d
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-mxs-usb.c
@@ -0,0 +1,589 @@
+/*
+ * Copyright 2012-2014 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/usb/otg.h>
+#include <linux/stmp_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#define DRIVER_NAME "mxs_phy"
+
+#define HW_USBPHY_PWD 0x00
+#define HW_USBPHY_CTRL 0x30
+#define HW_USBPHY_CTRL_SET 0x34
+#define HW_USBPHY_CTRL_CLR 0x38
+
+#define HW_USBPHY_DEBUG_SET 0x54
+#define HW_USBPHY_DEBUG_CLR 0x58
+
+#define HW_USBPHY_IP 0x90
+#define HW_USBPHY_IP_SET 0x94
+#define HW_USBPHY_IP_CLR 0x98
+
+#define BM_USBPHY_CTRL_SFTRST BIT(31)
+#define BM_USBPHY_CTRL_CLKGATE BIT(30)
+#define BM_USBPHY_CTRL_OTG_ID_VALUE BIT(27)
+#define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS BIT(26)
+#define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE BIT(25)
+#define BM_USBPHY_CTRL_ENVBUSCHG_WKUP BIT(23)
+#define BM_USBPHY_CTRL_ENIDCHG_WKUP BIT(22)
+#define BM_USBPHY_CTRL_ENDPDMCHG_WKUP BIT(21)
+#define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD BIT(20)
+#define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE BIT(19)
+#define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL BIT(18)
+#define BM_USBPHY_CTRL_ENUTMILEVEL3 BIT(15)
+#define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14)
+#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1)
+
+#define BM_USBPHY_IP_FIX (BIT(17) | BIT(18))
+
+#define BM_USBPHY_DEBUG_CLKGATE BIT(30)
+
+/* Anatop Registers */
+#define ANADIG_ANA_MISC0 0x150
+#define ANADIG_ANA_MISC0_SET 0x154
+#define ANADIG_ANA_MISC0_CLR 0x158
+
+#define ANADIG_USB1_VBUS_DET_STAT 0x1c0
+#define ANADIG_USB2_VBUS_DET_STAT 0x220
+
+#define ANADIG_USB1_LOOPBACK_SET 0x1e4
+#define ANADIG_USB1_LOOPBACK_CLR 0x1e8
+#define ANADIG_USB2_LOOPBACK_SET 0x244
+#define ANADIG_USB2_LOOPBACK_CLR 0x248
+
+#define ANADIG_USB1_MISC 0x1f0
+#define ANADIG_USB2_MISC 0x250
+
+#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG BIT(12)
+#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
+
+#define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID BIT(3)
+#define BM_ANADIG_USB2_VBUS_DET_STAT_VBUS_VALID BIT(3)
+
+#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 BIT(2)
+#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN BIT(5)
+#define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 BIT(2)
+#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN BIT(5)
+
+#define BM_ANADIG_USB1_MISC_RX_VPIN_FS BIT(29)
+#define BM_ANADIG_USB1_MISC_RX_VMIN_FS BIT(28)
+#define BM_ANADIG_USB2_MISC_RX_VPIN_FS BIT(29)
+#define BM_ANADIG_USB2_MISC_RX_VMIN_FS BIT(28)
+
+#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
+
+/* Do disconnection between PHY and controller without vbus */
+#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS BIT(0)
+
+/*
+ * The PHY will be in messy if there is a wakeup after putting
+ * bus to suspend (set portsc.suspendM) but before setting PHY to low
+ * power mode (set portsc.phcd).
+ */
+#define MXS_PHY_ABNORMAL_IN_SUSPEND BIT(1)
+
+/*
+ * The SOF sends too fast after resuming, it will cause disconnection
+ * between host and high speed device.
+ */
+#define MXS_PHY_SENDING_SOF_TOO_FAST BIT(2)
+
+/*
+ * IC has bug fixes logic, they include
+ * MXS_PHY_ABNORMAL_IN_SUSPEND and MXS_PHY_SENDING_SOF_TOO_FAST
+ * which are described at above flags, the RTL will handle it
+ * according to different versions.
+ */
+#define MXS_PHY_NEED_IP_FIX BIT(3)
+
+struct mxs_phy_data {
+ unsigned int flags;
+};
+
+static const struct mxs_phy_data imx23_phy_data = {
+ .flags = MXS_PHY_ABNORMAL_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST,
+};
+
+static const struct mxs_phy_data imx6q_phy_data = {
+ .flags = MXS_PHY_SENDING_SOF_TOO_FAST |
+ MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
+ MXS_PHY_NEED_IP_FIX,
+};
+
+static const struct mxs_phy_data imx6sl_phy_data = {
+ .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
+ MXS_PHY_NEED_IP_FIX,
+};
+
+static const struct mxs_phy_data vf610_phy_data = {
+ .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
+ MXS_PHY_NEED_IP_FIX,
+};
+
+static const struct mxs_phy_data imx6sx_phy_data = {
+ .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
+};
+
+static const struct of_device_id mxs_phy_dt_ids[] = {
+ { .compatible = "fsl,imx6sx-usbphy", .data = &imx6sx_phy_data, },
+ { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
+ { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
+ { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
+ { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
+
+struct mxs_phy {
+ struct usb_phy phy;
+ struct clk *clk;
+ const struct mxs_phy_data *data;
+ struct regmap *regmap_anatop;
+ int port_id;
+};
+
+static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy)
+{
+ return mxs_phy->data == &imx6q_phy_data;
+}
+
+static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
+{
+ return mxs_phy->data == &imx6sl_phy_data;
+}
+
+/*
+ * PHY needs some 32K cycles to switch from 32K clock to
+ * bus (such as AHB/AXI, etc) clock.
+ */
+static void mxs_phy_clock_switch_delay(void)
+{
+ usleep_range(300, 400);
+}
+
+static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
+{
+ int ret;
+ void __iomem *base = mxs_phy->phy.io_priv;
+
+ ret = stmp_reset_block(base + HW_USBPHY_CTRL);
+ if (ret)
+ return ret;
+
+ /* Power up the PHY */
+ writel(0, base + HW_USBPHY_PWD);
+
+ /*
+ * USB PHY Ctrl Setting
+ * - Auto clock/power on
+ * - Enable full/low speed support
+ */
+ writel(BM_USBPHY_CTRL_ENAUTOSET_USBCLKS |
+ BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE |
+ BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD |
+ BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE |
+ BM_USBPHY_CTRL_ENAUTO_PWRON_PLL |
+ BM_USBPHY_CTRL_ENUTMILEVEL2 |
+ BM_USBPHY_CTRL_ENUTMILEVEL3,
+ base + HW_USBPHY_CTRL_SET);
+
+ if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX)
+ writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET);
+
+ return 0;
+}
+
+/* Return true if the vbus is there */
+static bool mxs_phy_get_vbus_status(struct mxs_phy *mxs_phy)
+{
+ unsigned int vbus_value;
+
+ if (mxs_phy->port_id == 0)
+ regmap_read(mxs_phy->regmap_anatop,
+ ANADIG_USB1_VBUS_DET_STAT,
+ &vbus_value);
+ else if (mxs_phy->port_id == 1)
+ regmap_read(mxs_phy->regmap_anatop,
+ ANADIG_USB2_VBUS_DET_STAT,
+ &vbus_value);
+
+ if (vbus_value & BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)
+ return true;
+ else
+ return false;
+}
+
+static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect)
+{
+ void __iomem *base = mxs_phy->phy.io_priv;
+ u32 reg;
+
+ if (disconnect)
+ writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
+ base + HW_USBPHY_DEBUG_CLR);
+
+ if (mxs_phy->port_id == 0) {
+ reg = disconnect ? ANADIG_USB1_LOOPBACK_SET
+ : ANADIG_USB1_LOOPBACK_CLR;
+ regmap_write(mxs_phy->regmap_anatop, reg,
+ BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 |
+ BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN);
+ } else if (mxs_phy->port_id == 1) {
+ reg = disconnect ? ANADIG_USB2_LOOPBACK_SET
+ : ANADIG_USB2_LOOPBACK_CLR;
+ regmap_write(mxs_phy->regmap_anatop, reg,
+ BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 |
+ BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN);
+ }
+
+ if (!disconnect)
+ writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
+ base + HW_USBPHY_DEBUG_SET);
+
+ /* Delay some time, and let Linestate be SE0 for controller */
+ if (disconnect)
+ usleep_range(500, 1000);
+}
+
+static bool mxs_phy_is_otg_host(struct mxs_phy *mxs_phy)
+{
+ void __iomem *base = mxs_phy->phy.io_priv;
+ u32 phyctrl = readl(base + HW_USBPHY_CTRL);
+
+ if (IS_ENABLED(CONFIG_USB_OTG) &&
+ !(phyctrl & BM_USBPHY_CTRL_OTG_ID_VALUE))
+ return true;
+
+ return false;
+}
+
+static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
+{
+ bool vbus_is_on = false;
+
+ /* If the SoCs don't need to disconnect line without vbus, quit */
+ if (!(mxs_phy->data->flags & MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS))
+ return;
+
+ /* If the SoCs don't have anatop, quit */
+ if (!mxs_phy->regmap_anatop)
+ return;
+
+ vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
+
+ if (on && !vbus_is_on && !mxs_phy_is_otg_host(mxs_phy))
+ __mxs_phy_disconnect_line(mxs_phy, true);
+ else
+ __mxs_phy_disconnect_line(mxs_phy, false);
+
+}
+
+static int mxs_phy_init(struct usb_phy *phy)
+{
+ int ret;
+ struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+
+ mxs_phy_clock_switch_delay();
+ ret = clk_prepare_enable(mxs_phy->clk);
+ if (ret)
+ return ret;
+
+ return mxs_phy_hw_init(mxs_phy);
+}
+
+static void mxs_phy_shutdown(struct usb_phy *phy)
+{
+ struct mxs_phy *mxs_phy = to_mxs_phy(phy);
+ u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
+ BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
+ BM_USBPHY_CTRL_ENIDCHG_WKUP |
+ BM_USBPHY_CTRL_ENAUTOSET_USBCLKS |
+ BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE |
+ BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD |
+ BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE |
+ BM_USBPHY_CTRL_ENAUTO_PWRON_PLL;
+
+ writel(value, phy->io_priv + HW_USBPHY_CTRL_CLR);
+ writel(0xffffffff, phy->io_priv + HW_USBPHY_PWD);
+
+ writel(BM_USBPHY_CTRL_CLKGATE,
+ phy->io_priv + HW_USBPHY_CTRL_SET);
+
+ clk_disable_unprepare(mxs_phy->clk);
+}
+
+static bool mxs_phy_is_low_speed_connection(struct mxs_phy *mxs_phy)
+{
+ unsigned int line_state;
+ /* bit definition is the same for all controllers */
+ unsigned int dp_bit = BM_ANADIG_USB1_MISC_RX_VPIN_FS,
+ dm_bit = BM_ANADIG_USB1_MISC_RX_VMIN_FS;
+ unsigned int reg = ANADIG_USB1_MISC;
+
+ /* If the SoCs don't have anatop, quit */
+ if (!mxs_phy->regmap_anatop)
+ return false;
+
+ if (mxs_phy->port_id == 0)
+ reg = ANADIG_USB1_MISC;
+ else if (mxs_phy->port_id == 1)
+ reg = ANADIG_USB2_MISC;
+
+ regmap_read(mxs_phy->regmap_anatop, reg, &line_state);
+
+ if ((line_state & (dp_bit | dm_bit)) == dm_bit)
+ return true;
+ else
+ return false;
+}
+
+static int mxs_phy_suspend(struct usb_phy *x, int suspend)
+{
+ int ret;
+ struct mxs_phy *mxs_phy = to_mxs_phy(x);
+ bool low_speed_connection, vbus_is_on;
+
+ low_speed_connection = mxs_phy_is_low_speed_connection(mxs_phy);
+ vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
+
+ if (suspend) {
+ /*
+ * FIXME: Do not power down RXPWD1PT1 bit for low speed
+ * connect. The low speed connection will have problem at
+ * very rare cases during usb suspend and resume process.
+ */
+ if (low_speed_connection & vbus_is_on) {
+ /*
+ * If value to be set as pwd value is not 0xffffffff,
+ * several 32Khz cycles are needed.
+ */
+ mxs_phy_clock_switch_delay();
+ writel(0xffbfffff, x->io_priv + HW_USBPHY_PWD);
+ } else {
+ writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
+ }
+ writel(BM_USBPHY_CTRL_CLKGATE,
+ x->io_priv + HW_USBPHY_CTRL_SET);
+ clk_disable_unprepare(mxs_phy->clk);
+ } else {
+ mxs_phy_clock_switch_delay();
+ ret = clk_prepare_enable(mxs_phy->clk);
+ if (ret)
+ return ret;
+ writel(BM_USBPHY_CTRL_CLKGATE,
+ x->io_priv + HW_USBPHY_CTRL_CLR);
+ writel(0, x->io_priv + HW_USBPHY_PWD);
+ }
+
+ return 0;
+}
+
+static int mxs_phy_set_wakeup(struct usb_phy *x, bool enabled)
+{
+ struct mxs_phy *mxs_phy = to_mxs_phy(x);
+ u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
+ BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
+ BM_USBPHY_CTRL_ENIDCHG_WKUP;
+ if (enabled) {
+ mxs_phy_disconnect_line(mxs_phy, true);
+ writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_SET);
+ } else {
+ writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_CLR);
+ mxs_phy_disconnect_line(mxs_phy, false);
+ }
+
+ return 0;
+}
+
+static int mxs_phy_on_connect(struct usb_phy *phy,
+ enum usb_device_speed speed)
+{
+ dev_dbg(phy->dev, "%s device has connected\n",
+ (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
+
+ if (speed == USB_SPEED_HIGH)
+ writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+ phy->io_priv + HW_USBPHY_CTRL_SET);
+
+ return 0;
+}
+
+static int mxs_phy_on_disconnect(struct usb_phy *phy,
+ enum usb_device_speed speed)
+{
+ dev_dbg(phy->dev, "%s device has disconnected\n",
+ (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
+
+ /* Sometimes, the speed is not high speed when the error occurs */
+ if (readl(phy->io_priv + HW_USBPHY_CTRL) &
+ BM_USBPHY_CTRL_ENHOSTDISCONDETECT)
+ writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
+ phy->io_priv + HW_USBPHY_CTRL_CLR);
+
+ return 0;
+}
+
+static int mxs_phy_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ void __iomem *base;
+ struct clk *clk;
+ struct mxs_phy *mxs_phy;
+ int ret;
+ const struct of_device_id *of_id =
+ of_match_device(mxs_phy_dt_ids, &pdev->dev);
+ struct device_node *np = pdev->dev.of_node;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev,
+ "can't get the clock, err=%ld", PTR_ERR(clk));
+ return PTR_ERR(clk);
+ }
+
+ mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL);
+ if (!mxs_phy)
+ return -ENOMEM;
+
+ /* Some SoCs don't have anatop registers */
+ if (of_get_property(np, "fsl,anatop", NULL)) {
+ mxs_phy->regmap_anatop = syscon_regmap_lookup_by_phandle
+ (np, "fsl,anatop");
+ if (IS_ERR(mxs_phy->regmap_anatop)) {
+ dev_dbg(&pdev->dev,
+ "failed to find regmap for anatop\n");
+ return PTR_ERR(mxs_phy->regmap_anatop);
+ }
+ }
+
+ ret = of_alias_get_id(np, "usbphy");
+ if (ret < 0)
+ dev_dbg(&pdev->dev, "failed to get alias id, errno %d\n", ret);
+ mxs_phy->port_id = ret;
+
+ mxs_phy->phy.io_priv = base;
+ mxs_phy->phy.dev = &pdev->dev;
+ mxs_phy->phy.label = DRIVER_NAME;
+ mxs_phy->phy.init = mxs_phy_init;
+ mxs_phy->phy.shutdown = mxs_phy_shutdown;
+ mxs_phy->phy.set_suspend = mxs_phy_suspend;
+ mxs_phy->phy.notify_connect = mxs_phy_on_connect;
+ mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect;
+ mxs_phy->phy.type = USB_PHY_TYPE_USB2;
+ mxs_phy->phy.set_wakeup = mxs_phy_set_wakeup;
+
+ mxs_phy->clk = clk;
+ mxs_phy->data = of_id->data;
+
+ platform_set_drvdata(pdev, mxs_phy);
+
+ device_set_wakeup_capable(&pdev->dev, true);
+
+ ret = usb_add_phy_dev(&mxs_phy->phy);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mxs_phy_remove(struct platform_device *pdev)
+{
+ struct mxs_phy *mxs_phy = platform_get_drvdata(pdev);
+
+ usb_remove_phy(&mxs_phy->phy);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on)
+{
+ unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR;
+
+ /* If the SoCs don't have anatop, quit */
+ if (!mxs_phy->regmap_anatop)
+ return;
+
+ if (is_imx6q_phy(mxs_phy))
+ regmap_write(mxs_phy->regmap_anatop, reg,
+ BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG);
+ else if (is_imx6sl_phy(mxs_phy))
+ regmap_write(mxs_phy->regmap_anatop,
+ reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL);
+}
+
+static int mxs_phy_system_suspend(struct device *dev)
+{
+ struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ mxs_phy_enable_ldo_in_suspend(mxs_phy, true);
+
+ return 0;
+}
+
+static int mxs_phy_system_resume(struct device *dev)
+{
+ struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ mxs_phy_enable_ldo_in_suspend(mxs_phy, false);
+
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(mxs_phy_pm, mxs_phy_system_suspend,
+ mxs_phy_system_resume);
+
+static struct platform_driver mxs_phy_driver = {
+ .probe = mxs_phy_probe,
+ .remove = mxs_phy_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = mxs_phy_dt_ids,
+ .pm = &mxs_phy_pm,
+ },
+};
+
+static int __init mxs_phy_module_init(void)
+{
+ return platform_driver_register(&mxs_phy_driver);
+}
+postcore_initcall(mxs_phy_module_init);
+
+static void __exit mxs_phy_module_exit(void)
+{
+ platform_driver_unregister(&mxs_phy_driver);
+}
+module_exit(mxs_phy_module_exit);
+
+MODULE_ALIAS("platform:mxs-usb-phy");
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");
+MODULE_DESCRIPTION("Freescale MXS USB PHY driver");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/usb/phy/phy-omap-otg.c b/kernel/drivers/usb/phy/phy-omap-otg.c
new file mode 100644
index 000000000..56ee76030
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-omap-otg.c
@@ -0,0 +1,168 @@
+/*
+ * OMAP OTG controller driver
+ *
+ * Based on code from tahvo-usb.c and isp1301_omap.c drivers.
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ * Copyright (C) 2004 Texas Instruments
+ * Copyright (C) 2004 David Brownell
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/extcon.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap1.h>
+
+struct otg_device {
+ void __iomem *base;
+ bool id;
+ bool vbus;
+ struct extcon_specific_cable_nb vbus_dev;
+ struct extcon_specific_cable_nb id_dev;
+ struct notifier_block vbus_nb;
+ struct notifier_block id_nb;
+};
+
+#define OMAP_OTG_CTRL 0x0c
+#define OMAP_OTG_ASESSVLD (1 << 20)
+#define OMAP_OTG_BSESSEND (1 << 19)
+#define OMAP_OTG_BSESSVLD (1 << 18)
+#define OMAP_OTG_VBUSVLD (1 << 17)
+#define OMAP_OTG_ID (1 << 16)
+#define OMAP_OTG_XCEIV_OUTPUTS \
+ (OMAP_OTG_ASESSVLD | OMAP_OTG_BSESSEND | OMAP_OTG_BSESSVLD | \
+ OMAP_OTG_VBUSVLD | OMAP_OTG_ID)
+
+static void omap_otg_ctrl(struct otg_device *otg_dev, u32 outputs)
+{
+ u32 l;
+
+ l = readl(otg_dev->base + OMAP_OTG_CTRL);
+ l &= ~OMAP_OTG_XCEIV_OUTPUTS;
+ l |= outputs;
+ writel(l, otg_dev->base + OMAP_OTG_CTRL);
+}
+
+static void omap_otg_set_mode(struct otg_device *otg_dev)
+{
+ if (!otg_dev->id && otg_dev->vbus)
+ /* Set B-session valid. */
+ omap_otg_ctrl(otg_dev, OMAP_OTG_ID | OMAP_OTG_BSESSVLD);
+ else if (otg_dev->vbus)
+ /* Set A-session valid. */
+ omap_otg_ctrl(otg_dev, OMAP_OTG_ASESSVLD);
+ else if (!otg_dev->id)
+ /* Set B-session end to indicate no VBUS. */
+ omap_otg_ctrl(otg_dev, OMAP_OTG_ID | OMAP_OTG_BSESSEND);
+}
+
+static int omap_otg_id_notifier(struct notifier_block *nb,
+ unsigned long event, void *ptr)
+{
+ struct otg_device *otg_dev = container_of(nb, struct otg_device, id_nb);
+
+ otg_dev->id = event;
+ omap_otg_set_mode(otg_dev);
+
+ return NOTIFY_DONE;
+}
+
+static int omap_otg_vbus_notifier(struct notifier_block *nb,
+ unsigned long event, void *ptr)
+{
+ struct otg_device *otg_dev = container_of(nb, struct otg_device,
+ vbus_nb);
+
+ otg_dev->vbus = event;
+ omap_otg_set_mode(otg_dev);
+
+ return NOTIFY_DONE;
+}
+
+static int omap_otg_probe(struct platform_device *pdev)
+{
+ const struct omap_usb_config *config = pdev->dev.platform_data;
+ struct otg_device *otg_dev;
+ struct extcon_dev *extcon;
+ int ret;
+ u32 rev;
+
+ if (!config || !config->extcon)
+ return -ENODEV;
+
+ extcon = extcon_get_extcon_dev(config->extcon);
+ if (!extcon)
+ return -EPROBE_DEFER;
+
+ otg_dev = devm_kzalloc(&pdev->dev, sizeof(*otg_dev), GFP_KERNEL);
+ if (!otg_dev)
+ return -ENOMEM;
+
+ otg_dev->base = devm_ioremap_resource(&pdev->dev, &pdev->resource[0]);
+ if (IS_ERR(otg_dev->base))
+ return PTR_ERR(otg_dev->base);
+
+ otg_dev->id_nb.notifier_call = omap_otg_id_notifier;
+ otg_dev->vbus_nb.notifier_call = omap_otg_vbus_notifier;
+
+ ret = extcon_register_interest(&otg_dev->id_dev, config->extcon,
+ "USB-HOST", &otg_dev->id_nb);
+ if (ret)
+ return ret;
+
+ ret = extcon_register_interest(&otg_dev->vbus_dev, config->extcon,
+ "USB", &otg_dev->vbus_nb);
+ if (ret) {
+ extcon_unregister_interest(&otg_dev->id_dev);
+ return ret;
+ }
+
+ otg_dev->id = extcon_get_cable_state(extcon, "USB-HOST");
+ otg_dev->vbus = extcon_get_cable_state(extcon, "USB");
+ omap_otg_set_mode(otg_dev);
+
+ rev = readl(otg_dev->base);
+
+ dev_info(&pdev->dev,
+ "OMAP USB OTG controller rev %d.%d (%s, id=%d, vbus=%d)\n",
+ (rev >> 4) & 0xf, rev & 0xf, config->extcon, otg_dev->id,
+ otg_dev->vbus);
+
+ return 0;
+}
+
+static int omap_otg_remove(struct platform_device *pdev)
+{
+ struct otg_device *otg_dev = platform_get_drvdata(pdev);
+
+ extcon_unregister_interest(&otg_dev->id_dev);
+ extcon_unregister_interest(&otg_dev->vbus_dev);
+
+ return 0;
+}
+
+static struct platform_driver omap_otg_driver = {
+ .probe = omap_otg_probe,
+ .remove = omap_otg_remove,
+ .driver = {
+ .name = "omap_otg",
+ },
+};
+module_platform_driver(omap_otg_driver);
+
+MODULE_DESCRIPTION("OMAP USB OTG controller driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>");
diff --git a/kernel/drivers/usb/phy/phy-rcar-gen2-usb.c b/kernel/drivers/usb/phy/phy-rcar-gen2-usb.c
new file mode 100644
index 000000000..f81800b65
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-rcar-gen2-usb.c
@@ -0,0 +1,246 @@
+/*
+ * Renesas R-Car Gen2 USB phy driver
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Cogent Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_data/usb-rcar-gen2-phy.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/usb/otg.h>
+
+struct rcar_gen2_usb_phy_priv {
+ struct usb_phy phy;
+ void __iomem *base;
+ struct clk *clk;
+ spinlock_t lock;
+ int usecount;
+ u32 ugctrl2;
+};
+
+#define usb_phy_to_priv(p) container_of(p, struct rcar_gen2_usb_phy_priv, phy)
+
+/* Low Power Status register */
+#define USBHS_LPSTS_REG 0x02
+#define USBHS_LPSTS_SUSPM (1 << 14)
+
+/* USB General control register */
+#define USBHS_UGCTRL_REG 0x80
+#define USBHS_UGCTRL_CONNECT (1 << 2)
+#define USBHS_UGCTRL_PLLRESET (1 << 0)
+
+/* USB General control register 2 */
+#define USBHS_UGCTRL2_REG 0x84
+#define USBHS_UGCTRL2_USB0_PCI (1 << 4)
+#define USBHS_UGCTRL2_USB0_HS (3 << 4)
+#define USBHS_UGCTRL2_USB2_PCI (0 << 31)
+#define USBHS_UGCTRL2_USB2_SS (1 << 31)
+
+/* USB General status register */
+#define USBHS_UGSTS_REG 0x88
+#define USBHS_UGSTS_LOCK (1 << 8)
+
+/* Enable USBHS internal phy */
+static int __rcar_gen2_usbhs_phy_enable(void __iomem *base)
+{
+ u32 val;
+ int i;
+
+ /* USBHS PHY power on */
+ val = ioread32(base + USBHS_UGCTRL_REG);
+ val &= ~USBHS_UGCTRL_PLLRESET;
+ iowrite32(val, base + USBHS_UGCTRL_REG);
+
+ val = ioread16(base + USBHS_LPSTS_REG);
+ val |= USBHS_LPSTS_SUSPM;
+ iowrite16(val, base + USBHS_LPSTS_REG);
+
+ for (i = 0; i < 20; i++) {
+ val = ioread32(base + USBHS_UGSTS_REG);
+ if ((val & USBHS_UGSTS_LOCK) == USBHS_UGSTS_LOCK) {
+ val = ioread32(base + USBHS_UGCTRL_REG);
+ val |= USBHS_UGCTRL_CONNECT;
+ iowrite32(val, base + USBHS_UGCTRL_REG);
+ return 0;
+ }
+ udelay(1);
+ }
+
+ /* Timed out waiting for the PLL lock */
+ return -ETIMEDOUT;
+}
+
+/* Disable USBHS internal phy */
+static int __rcar_gen2_usbhs_phy_disable(void __iomem *base)
+{
+ u32 val;
+
+ /* USBHS PHY power off */
+ val = ioread32(base + USBHS_UGCTRL_REG);
+ val &= ~USBHS_UGCTRL_CONNECT;
+ iowrite32(val, base + USBHS_UGCTRL_REG);
+
+ val = ioread16(base + USBHS_LPSTS_REG);
+ val &= ~USBHS_LPSTS_SUSPM;
+ iowrite16(val, base + USBHS_LPSTS_REG);
+
+ val = ioread32(base + USBHS_UGCTRL_REG);
+ val |= USBHS_UGCTRL_PLLRESET;
+ iowrite32(val, base + USBHS_UGCTRL_REG);
+ return 0;
+}
+
+/* Setup USB channels */
+static void __rcar_gen2_usb_phy_init(struct rcar_gen2_usb_phy_priv *priv)
+{
+ u32 val;
+
+ clk_prepare_enable(priv->clk);
+
+ /* Set USB channels in the USBHS UGCTRL2 register */
+ val = ioread32(priv->base + USBHS_UGCTRL2_REG);
+ val &= ~(USBHS_UGCTRL2_USB0_HS | USBHS_UGCTRL2_USB2_SS);
+ val |= priv->ugctrl2;
+ iowrite32(val, priv->base + USBHS_UGCTRL2_REG);
+}
+
+/* Shutdown USB channels */
+static void __rcar_gen2_usb_phy_shutdown(struct rcar_gen2_usb_phy_priv *priv)
+{
+ __rcar_gen2_usbhs_phy_disable(priv->base);
+ clk_disable_unprepare(priv->clk);
+}
+
+static int rcar_gen2_usb_phy_set_suspend(struct usb_phy *phy, int suspend)
+{
+ struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ retval = suspend ? __rcar_gen2_usbhs_phy_disable(priv->base) :
+ __rcar_gen2_usbhs_phy_enable(priv->base);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return retval;
+}
+
+static int rcar_gen2_usb_phy_init(struct usb_phy *phy)
+{
+ struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ /*
+ * Enable the clock and setup USB channels
+ * if it's the first user
+ */
+ if (!priv->usecount++)
+ __rcar_gen2_usb_phy_init(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return 0;
+}
+
+static void rcar_gen2_usb_phy_shutdown(struct usb_phy *phy)
+{
+ struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (!priv->usecount) {
+ dev_warn(phy->dev, "Trying to disable phy with 0 usecount\n");
+ goto out;
+ }
+
+ /* Disable everything if it's the last user */
+ if (!--priv->usecount)
+ __rcar_gen2_usb_phy_shutdown(priv);
+out:
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int rcar_gen2_usb_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct rcar_gen2_phy_platform_data *pdata;
+ struct rcar_gen2_usb_phy_priv *priv;
+ struct resource *res;
+ void __iomem *base;
+ struct clk *clk;
+ int retval;
+
+ pdata = dev_get_platdata(dev);
+ if (!pdata) {
+ dev_err(dev, "No platform data\n");
+ return -EINVAL;
+ }
+
+ clk = devm_clk_get(dev, "usbhs");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "Can't get the clock\n");
+ return PTR_ERR(clk);
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ spin_lock_init(&priv->lock);
+ priv->clk = clk;
+ priv->base = base;
+ priv->ugctrl2 = pdata->chan0_pci ?
+ USBHS_UGCTRL2_USB0_PCI : USBHS_UGCTRL2_USB0_HS;
+ priv->ugctrl2 |= pdata->chan2_pci ?
+ USBHS_UGCTRL2_USB2_PCI : USBHS_UGCTRL2_USB2_SS;
+ priv->phy.dev = dev;
+ priv->phy.label = dev_name(dev);
+ priv->phy.init = rcar_gen2_usb_phy_init;
+ priv->phy.shutdown = rcar_gen2_usb_phy_shutdown;
+ priv->phy.set_suspend = rcar_gen2_usb_phy_set_suspend;
+
+ retval = usb_add_phy_dev(&priv->phy);
+ if (retval < 0) {
+ dev_err(dev, "Failed to add USB phy\n");
+ return retval;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ return retval;
+}
+
+static int rcar_gen2_usb_phy_remove(struct platform_device *pdev)
+{
+ struct rcar_gen2_usb_phy_priv *priv = platform_get_drvdata(pdev);
+
+ usb_remove_phy(&priv->phy);
+
+ return 0;
+}
+
+static struct platform_driver rcar_gen2_usb_phy_driver = {
+ .driver = {
+ .name = "usb_phy_rcar_gen2",
+ },
+ .probe = rcar_gen2_usb_phy_probe,
+ .remove = rcar_gen2_usb_phy_remove,
+};
+
+module_platform_driver(rcar_gen2_usb_phy_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car Gen2 USB phy");
+MODULE_AUTHOR("Valentine Barshak <valentine.barshak@cogentembedded.com>");
diff --git a/kernel/drivers/usb/phy/phy-rcar-usb.c b/kernel/drivers/usb/phy/phy-rcar-usb.c
new file mode 100644
index 000000000..1e09b8377
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-rcar-usb.c
@@ -0,0 +1,247 @@
+/*
+ * Renesas R-Car USB phy driver
+ *
+ * Copyright (C) 2012-2013 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ * Copyright (C) 2013 Cogent Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/usb/otg.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/platform_data/usb-rcar-phy.h>
+
+/* REGS block */
+#define USBPCTRL0 0x00
+#define USBPCTRL1 0x04
+#define USBST 0x08
+#define USBEH0 0x0C
+#define USBOH0 0x1C
+#define USBCTL0 0x58
+
+/* High-speed signal quality characteristic control registers (R8A7778 only) */
+#define HSQCTL1 0x24
+#define HSQCTL2 0x28
+
+/* USBPCTRL0 */
+#define OVC2 (1 << 10) /* (R8A7779 only) */
+ /* Switches the OVC input pin for port 2: */
+ /* 1: USB_OVC2, 0: OVC2 */
+#define OVC1_VBUS1 (1 << 9) /* Switches the OVC input pin for port 1: */
+ /* 1: USB_OVC1, 0: OVC1/VBUS1 */
+ /* Function mode: set to 0 */
+#define OVC0 (1 << 8) /* Switches the OVC input pin for port 0: */
+ /* 1: USB_OVC0 pin, 0: OVC0 */
+#define OVC2_ACT (1 << 6) /* (R8A7779 only) */
+ /* Host mode: OVC2 polarity: */
+ /* 1: active-high, 0: active-low */
+#define PENC (1 << 4) /* Function mode: output level of PENC1 pin: */
+ /* 1: high, 0: low */
+#define OVC0_ACT (1 << 3) /* Host mode: OVC0 polarity: */
+ /* 1: active-high, 0: active-low */
+#define OVC1_ACT (1 << 1) /* Host mode: OVC1 polarity: */
+ /* 1: active-high, 0: active-low */
+ /* Function mode: be sure to set to 1 */
+#define PORT1 (1 << 0) /* Selects port 1 mode: */
+ /* 1: function, 0: host */
+/* USBPCTRL1 */
+#define PHY_RST (1 << 2)
+#define PLL_ENB (1 << 1)
+#define PHY_ENB (1 << 0)
+
+/* USBST */
+#define ST_ACT (1 << 31)
+#define ST_PLL (1 << 30)
+
+struct rcar_usb_phy_priv {
+ struct usb_phy phy;
+ spinlock_t lock;
+
+ void __iomem *reg0;
+ void __iomem *reg1;
+ int counter;
+};
+
+#define usb_phy_to_priv(p) container_of(p, struct rcar_usb_phy_priv, phy)
+
+
+/*
+ * USB initial/install operation.
+ *
+ * This function setup USB phy.
+ * The used value and setting order came from
+ * [USB :: Initial setting] on datasheet.
+ */
+static int rcar_usb_phy_init(struct usb_phy *phy)
+{
+ struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy);
+ struct device *dev = phy->dev;
+ struct rcar_phy_platform_data *pdata = dev_get_platdata(dev);
+ void __iomem *reg0 = priv->reg0;
+ void __iomem *reg1 = priv->reg1;
+ static const u8 ovcn_act[] = { OVC0_ACT, OVC1_ACT, OVC2_ACT };
+ int i;
+ u32 val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (priv->counter++ == 0) {
+
+ /*
+ * USB phy start-up
+ */
+
+ /* (1) USB-PHY standby release */
+ iowrite32(PHY_ENB, (reg0 + USBPCTRL1));
+
+ /* (2) start USB-PHY internal PLL */
+ iowrite32(PHY_ENB | PLL_ENB, (reg0 + USBPCTRL1));
+
+ /* (3) set USB-PHY in accord with the conditions of usage */
+ if (reg1) {
+ u32 hsqctl1 = pdata->ferrite_bead ? 0x41 : 0;
+ u32 hsqctl2 = pdata->ferrite_bead ? 0x0d : 7;
+
+ iowrite32(hsqctl1, reg1 + HSQCTL1);
+ iowrite32(hsqctl2, reg1 + HSQCTL2);
+ }
+
+ /* (4) USB module status check */
+ for (i = 0; i < 1024; i++) {
+ udelay(10);
+ val = ioread32(reg0 + USBST);
+ if (val == (ST_ACT | ST_PLL))
+ break;
+ }
+
+ if (val != (ST_ACT | ST_PLL)) {
+ dev_err(dev, "USB phy not ready\n");
+ goto phy_init_end;
+ }
+
+ /* (5) USB-PHY reset clear */
+ iowrite32(PHY_ENB | PLL_ENB | PHY_RST, (reg0 + USBPCTRL1));
+
+ /* Board specific port settings */
+ val = 0;
+ if (pdata->port1_func)
+ val |= PORT1;
+ if (pdata->penc1)
+ val |= PENC;
+ for (i = 0; i < 3; i++) {
+ /* OVCn bits follow each other in the right order */
+ if (pdata->ovc_pin[i].select_3_3v)
+ val |= OVC0 << i;
+ /* OVCn_ACT bits are spaced by irregular intervals */
+ if (pdata->ovc_pin[i].active_high)
+ val |= ovcn_act[i];
+ }
+ iowrite32(val, (reg0 + USBPCTRL0));
+
+ /*
+ * Bus alignment settings
+ */
+
+ /* (1) EHCI bus alignment (little endian) */
+ iowrite32(0x00000000, (reg0 + USBEH0));
+
+ /* (1) OHCI bus alignment (little endian) */
+ iowrite32(0x00000000, (reg0 + USBOH0));
+ }
+
+phy_init_end:
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static void rcar_usb_phy_shutdown(struct usb_phy *phy)
+{
+ struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy);
+ void __iomem *reg0 = priv->reg0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ if (priv->counter-- == 1) /* last user */
+ iowrite32(0x00000000, (reg0 + USBPCTRL1));
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int rcar_usb_phy_probe(struct platform_device *pdev)
+{
+ struct rcar_usb_phy_priv *priv;
+ struct resource *res0, *res1;
+ struct device *dev = &pdev->dev;
+ void __iomem *reg0, *reg1 = NULL;
+ int ret;
+
+ if (!dev_get_platdata(&pdev->dev)) {
+ dev_err(dev, "No platform data\n");
+ return -EINVAL;
+ }
+
+ res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ reg0 = devm_ioremap_resource(dev, res0);
+ if (IS_ERR(reg0))
+ return PTR_ERR(reg0);
+
+ res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ reg1 = devm_ioremap_resource(dev, res1);
+ if (IS_ERR(reg1))
+ return PTR_ERR(reg1);
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->reg0 = reg0;
+ priv->reg1 = reg1;
+ priv->counter = 0;
+ priv->phy.dev = dev;
+ priv->phy.label = dev_name(dev);
+ priv->phy.init = rcar_usb_phy_init;
+ priv->phy.shutdown = rcar_usb_phy_shutdown;
+ spin_lock_init(&priv->lock);
+
+ ret = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
+ if (ret < 0) {
+ dev_err(dev, "usb phy addition error\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ return ret;
+}
+
+static int rcar_usb_phy_remove(struct platform_device *pdev)
+{
+ struct rcar_usb_phy_priv *priv = platform_get_drvdata(pdev);
+
+ usb_remove_phy(&priv->phy);
+
+ return 0;
+}
+
+static struct platform_driver rcar_usb_phy_driver = {
+ .driver = {
+ .name = "rcar_usb_phy",
+ },
+ .probe = rcar_usb_phy_probe,
+ .remove = rcar_usb_phy_remove,
+};
+
+module_platform_driver(rcar_usb_phy_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car USB phy");
+MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");
diff --git a/kernel/drivers/usb/phy/phy-tahvo.c b/kernel/drivers/usb/phy/phy-tahvo.c
new file mode 100644
index 000000000..2b28443d0
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-tahvo.c
@@ -0,0 +1,461 @@
+/*
+ * Tahvo USB transceiver driver
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ *
+ * Parts copied from isp1301_omap.c.
+ * Copyright (C) 2004 Texas Instruments
+ * Copyright (C) 2004 David Brownell
+ *
+ * Original driver written by Juha Yrjölä, Tony Lindgren and Timo Teräs.
+ * Modified for Retu/Tahvo MFD by Aaro Koskinen.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/usb.h>
+#include <linux/extcon.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb/otg.h>
+#include <linux/mfd/retu.h>
+#include <linux/usb/gadget.h>
+#include <linux/platform_device.h>
+
+#define DRIVER_NAME "tahvo-usb"
+
+#define TAHVO_REG_IDSR 0x02
+#define TAHVO_REG_USBR 0x06
+
+#define USBR_SLAVE_CONTROL (1 << 8)
+#define USBR_VPPVIO_SW (1 << 7)
+#define USBR_SPEED (1 << 6)
+#define USBR_REGOUT (1 << 5)
+#define USBR_MASTER_SW2 (1 << 4)
+#define USBR_MASTER_SW1 (1 << 3)
+#define USBR_SLAVE_SW (1 << 2)
+#define USBR_NSUSPEND (1 << 1)
+#define USBR_SEMODE (1 << 0)
+
+#define TAHVO_MODE_HOST 0
+#define TAHVO_MODE_PERIPHERAL 1
+
+struct tahvo_usb {
+ struct platform_device *pt_dev;
+ struct usb_phy phy;
+ int vbus_state;
+ struct mutex serialize;
+ struct clk *ick;
+ int irq;
+ int tahvo_mode;
+ struct extcon_dev extcon;
+};
+
+static const char *tahvo_cable[] = {
+ "USB-HOST",
+ "USB",
+ NULL,
+};
+
+static ssize_t vbus_state_show(struct device *device,
+ struct device_attribute *attr, char *buf)
+{
+ struct tahvo_usb *tu = dev_get_drvdata(device);
+ return sprintf(buf, "%s\n", tu->vbus_state ? "on" : "off");
+}
+static DEVICE_ATTR(vbus, 0444, vbus_state_show, NULL);
+
+static void check_vbus_state(struct tahvo_usb *tu)
+{
+ struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
+ int reg, prev_state;
+
+ reg = retu_read(rdev, TAHVO_REG_IDSR);
+ if (reg & TAHVO_STAT_VBUS) {
+ switch (tu->phy.otg->state) {
+ case OTG_STATE_B_IDLE:
+ /* Enable the gadget driver */
+ if (tu->phy.otg->gadget)
+ usb_gadget_vbus_connect(tu->phy.otg->gadget);
+ tu->phy.otg->state = OTG_STATE_B_PERIPHERAL;
+ usb_phy_set_event(&tu->phy, USB_EVENT_ENUMERATED);
+ break;
+ case OTG_STATE_A_IDLE:
+ /*
+ * Session is now valid assuming the USB hub is driving
+ * Vbus.
+ */
+ tu->phy.otg->state = OTG_STATE_A_HOST;
+ break;
+ default:
+ break;
+ }
+ dev_info(&tu->pt_dev->dev, "USB cable connected\n");
+ } else {
+ switch (tu->phy.otg->state) {
+ case OTG_STATE_B_PERIPHERAL:
+ if (tu->phy.otg->gadget)
+ usb_gadget_vbus_disconnect(tu->phy.otg->gadget);
+ tu->phy.otg->state = OTG_STATE_B_IDLE;
+ usb_phy_set_event(&tu->phy, USB_EVENT_NONE);
+ break;
+ case OTG_STATE_A_HOST:
+ tu->phy.otg->state = OTG_STATE_A_IDLE;
+ break;
+ default:
+ break;
+ }
+ dev_info(&tu->pt_dev->dev, "USB cable disconnected\n");
+ }
+
+ prev_state = tu->vbus_state;
+ tu->vbus_state = reg & TAHVO_STAT_VBUS;
+ if (prev_state != tu->vbus_state) {
+ extcon_set_cable_state(&tu->extcon, "USB", tu->vbus_state);
+ sysfs_notify(&tu->pt_dev->dev.kobj, NULL, "vbus_state");
+ }
+}
+
+static void tahvo_usb_become_host(struct tahvo_usb *tu)
+{
+ struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
+
+ extcon_set_cable_state(&tu->extcon, "USB-HOST", true);
+
+ /* Power up the transceiver in USB host mode */
+ retu_write(rdev, TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND |
+ USBR_MASTER_SW2 | USBR_MASTER_SW1);
+ tu->phy.otg->state = OTG_STATE_A_IDLE;
+
+ check_vbus_state(tu);
+}
+
+static void tahvo_usb_stop_host(struct tahvo_usb *tu)
+{
+ tu->phy.otg->state = OTG_STATE_A_IDLE;
+}
+
+static void tahvo_usb_become_peripheral(struct tahvo_usb *tu)
+{
+ struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
+
+ extcon_set_cable_state(&tu->extcon, "USB-HOST", false);
+
+ /* Power up transceiver and set it in USB peripheral mode */
+ retu_write(rdev, TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT |
+ USBR_NSUSPEND | USBR_SLAVE_SW);
+ tu->phy.otg->state = OTG_STATE_B_IDLE;
+
+ check_vbus_state(tu);
+}
+
+static void tahvo_usb_stop_peripheral(struct tahvo_usb *tu)
+{
+ if (tu->phy.otg->gadget)
+ usb_gadget_vbus_disconnect(tu->phy.otg->gadget);
+ tu->phy.otg->state = OTG_STATE_B_IDLE;
+}
+
+static void tahvo_usb_power_off(struct tahvo_usb *tu)
+{
+ struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
+
+ /* Disable gadget controller if any */
+ if (tu->phy.otg->gadget)
+ usb_gadget_vbus_disconnect(tu->phy.otg->gadget);
+
+ /* Power off transceiver */
+ retu_write(rdev, TAHVO_REG_USBR, 0);
+ tu->phy.otg->state = OTG_STATE_UNDEFINED;
+}
+
+static int tahvo_usb_set_suspend(struct usb_phy *dev, int suspend)
+{
+ struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, phy);
+ struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
+ u16 w;
+
+ dev_dbg(&tu->pt_dev->dev, "%s\n", __func__);
+
+ w = retu_read(rdev, TAHVO_REG_USBR);
+ if (suspend)
+ w &= ~USBR_NSUSPEND;
+ else
+ w |= USBR_NSUSPEND;
+ retu_write(rdev, TAHVO_REG_USBR, w);
+
+ return 0;
+}
+
+static int tahvo_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ struct tahvo_usb *tu = container_of(otg->usb_phy, struct tahvo_usb,
+ phy);
+
+ dev_dbg(&tu->pt_dev->dev, "%s %p\n", __func__, host);
+
+ mutex_lock(&tu->serialize);
+
+ if (host == NULL) {
+ if (tu->tahvo_mode == TAHVO_MODE_HOST)
+ tahvo_usb_power_off(tu);
+ otg->host = NULL;
+ mutex_unlock(&tu->serialize);
+ return 0;
+ }
+
+ if (tu->tahvo_mode == TAHVO_MODE_HOST) {
+ otg->host = NULL;
+ tahvo_usb_become_host(tu);
+ }
+
+ otg->host = host;
+
+ mutex_unlock(&tu->serialize);
+
+ return 0;
+}
+
+static int tahvo_usb_set_peripheral(struct usb_otg *otg,
+ struct usb_gadget *gadget)
+{
+ struct tahvo_usb *tu = container_of(otg->usb_phy, struct tahvo_usb,
+ phy);
+
+ dev_dbg(&tu->pt_dev->dev, "%s %p\n", __func__, gadget);
+
+ mutex_lock(&tu->serialize);
+
+ if (!gadget) {
+ if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL)
+ tahvo_usb_power_off(tu);
+ tu->phy.otg->gadget = NULL;
+ mutex_unlock(&tu->serialize);
+ return 0;
+ }
+
+ tu->phy.otg->gadget = gadget;
+ if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL)
+ tahvo_usb_become_peripheral(tu);
+
+ mutex_unlock(&tu->serialize);
+
+ return 0;
+}
+
+static irqreturn_t tahvo_usb_vbus_interrupt(int irq, void *_tu)
+{
+ struct tahvo_usb *tu = _tu;
+
+ mutex_lock(&tu->serialize);
+ check_vbus_state(tu);
+ mutex_unlock(&tu->serialize);
+
+ return IRQ_HANDLED;
+}
+
+static ssize_t otg_mode_show(struct device *device,
+ struct device_attribute *attr, char *buf)
+{
+ struct tahvo_usb *tu = dev_get_drvdata(device);
+
+ switch (tu->tahvo_mode) {
+ case TAHVO_MODE_HOST:
+ return sprintf(buf, "host\n");
+ case TAHVO_MODE_PERIPHERAL:
+ return sprintf(buf, "peripheral\n");
+ }
+
+ return -EINVAL;
+}
+
+static ssize_t otg_mode_store(struct device *device,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct tahvo_usb *tu = dev_get_drvdata(device);
+ int r;
+
+ mutex_lock(&tu->serialize);
+ if (count >= 4 && strncmp(buf, "host", 4) == 0) {
+ if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL)
+ tahvo_usb_stop_peripheral(tu);
+ tu->tahvo_mode = TAHVO_MODE_HOST;
+ if (tu->phy.otg->host) {
+ dev_info(device, "HOST mode: host controller present\n");
+ tahvo_usb_become_host(tu);
+ } else {
+ dev_info(device, "HOST mode: no host controller, powering off\n");
+ tahvo_usb_power_off(tu);
+ }
+ r = strlen(buf);
+ } else if (count >= 10 && strncmp(buf, "peripheral", 10) == 0) {
+ if (tu->tahvo_mode == TAHVO_MODE_HOST)
+ tahvo_usb_stop_host(tu);
+ tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
+ if (tu->phy.otg->gadget) {
+ dev_info(device, "PERIPHERAL mode: gadget driver present\n");
+ tahvo_usb_become_peripheral(tu);
+ } else {
+ dev_info(device, "PERIPHERAL mode: no gadget driver, powering off\n");
+ tahvo_usb_power_off(tu);
+ }
+ r = strlen(buf);
+ } else {
+ r = -EINVAL;
+ }
+ mutex_unlock(&tu->serialize);
+
+ return r;
+}
+static DEVICE_ATTR(otg_mode, 0644, otg_mode_show, otg_mode_store);
+
+static struct attribute *tahvo_attributes[] = {
+ &dev_attr_vbus.attr,
+ &dev_attr_otg_mode.attr,
+ NULL
+};
+
+static struct attribute_group tahvo_attr_group = {
+ .attrs = tahvo_attributes,
+};
+
+static int tahvo_usb_probe(struct platform_device *pdev)
+{
+ struct retu_dev *rdev = dev_get_drvdata(pdev->dev.parent);
+ struct tahvo_usb *tu;
+ int ret;
+
+ tu = devm_kzalloc(&pdev->dev, sizeof(*tu), GFP_KERNEL);
+ if (!tu)
+ return -ENOMEM;
+
+ tu->phy.otg = devm_kzalloc(&pdev->dev, sizeof(*tu->phy.otg),
+ GFP_KERNEL);
+ if (!tu->phy.otg)
+ return -ENOMEM;
+
+ tu->pt_dev = pdev;
+
+ /* Default mode */
+#ifdef CONFIG_TAHVO_USB_HOST_BY_DEFAULT
+ tu->tahvo_mode = TAHVO_MODE_HOST;
+#else
+ tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
+#endif
+
+ mutex_init(&tu->serialize);
+
+ tu->ick = devm_clk_get(&pdev->dev, "usb_l4_ick");
+ if (!IS_ERR(tu->ick))
+ clk_enable(tu->ick);
+
+ /*
+ * Set initial state, so that we generate kevents only on state changes.
+ */
+ tu->vbus_state = retu_read(rdev, TAHVO_REG_IDSR) & TAHVO_STAT_VBUS;
+
+ tu->extcon.name = DRIVER_NAME;
+ tu->extcon.supported_cable = tahvo_cable;
+ tu->extcon.dev.parent = &pdev->dev;
+
+ ret = extcon_dev_register(&tu->extcon);
+ if (ret) {
+ dev_err(&pdev->dev, "could not register extcon device: %d\n",
+ ret);
+ goto err_disable_clk;
+ }
+
+ /* Set the initial cable state. */
+ extcon_set_cable_state(&tu->extcon, "USB-HOST",
+ tu->tahvo_mode == TAHVO_MODE_HOST);
+ extcon_set_cable_state(&tu->extcon, "USB", tu->vbus_state);
+
+ /* Create OTG interface */
+ tahvo_usb_power_off(tu);
+ tu->phy.dev = &pdev->dev;
+ tu->phy.otg->state = OTG_STATE_UNDEFINED;
+ tu->phy.label = DRIVER_NAME;
+ tu->phy.set_suspend = tahvo_usb_set_suspend;
+
+ tu->phy.otg->usb_phy = &tu->phy;
+ tu->phy.otg->set_host = tahvo_usb_set_host;
+ tu->phy.otg->set_peripheral = tahvo_usb_set_peripheral;
+
+ ret = usb_add_phy(&tu->phy, USB_PHY_TYPE_USB2);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot register USB transceiver: %d\n",
+ ret);
+ goto err_extcon_unreg;
+ }
+
+ dev_set_drvdata(&pdev->dev, tu);
+
+ tu->irq = platform_get_irq(pdev, 0);
+ ret = request_threaded_irq(tu->irq, NULL, tahvo_usb_vbus_interrupt,
+ IRQF_ONESHOT,
+ "tahvo-vbus", tu);
+ if (ret) {
+ dev_err(&pdev->dev, "could not register tahvo-vbus irq: %d\n",
+ ret);
+ goto err_remove_phy;
+ }
+
+ /* Attributes */
+ ret = sysfs_create_group(&pdev->dev.kobj, &tahvo_attr_group);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot create sysfs group: %d\n", ret);
+ goto err_free_irq;
+ }
+
+ return 0;
+
+err_free_irq:
+ free_irq(tu->irq, tu);
+err_remove_phy:
+ usb_remove_phy(&tu->phy);
+err_extcon_unreg:
+ extcon_dev_unregister(&tu->extcon);
+err_disable_clk:
+ if (!IS_ERR(tu->ick))
+ clk_disable(tu->ick);
+
+ return ret;
+}
+
+static int tahvo_usb_remove(struct platform_device *pdev)
+{
+ struct tahvo_usb *tu = platform_get_drvdata(pdev);
+
+ sysfs_remove_group(&pdev->dev.kobj, &tahvo_attr_group);
+ free_irq(tu->irq, tu);
+ usb_remove_phy(&tu->phy);
+ extcon_dev_unregister(&tu->extcon);
+ if (!IS_ERR(tu->ick))
+ clk_disable(tu->ick);
+
+ return 0;
+}
+
+static struct platform_driver tahvo_usb_driver = {
+ .probe = tahvo_usb_probe,
+ .remove = tahvo_usb_remove,
+ .driver = {
+ .name = "tahvo-usb",
+ },
+};
+module_platform_driver(tahvo_usb_driver);
+
+MODULE_DESCRIPTION("Tahvo USB transceiver driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Juha Yrjölä, Tony Lindgren, and Timo Teräs");
+MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>");
diff --git a/kernel/drivers/usb/phy/phy-tegra-usb.c b/kernel/drivers/usb/phy/phy-tegra-usb.c
new file mode 100644
index 000000000..ab025b009
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-tegra-usb.c
@@ -0,0 +1,1090 @@
+/*
+ * Copyright (C) 2010 Google, Inc.
+ * Copyright (C) 2013 NVIDIA Corporation
+ *
+ * Author:
+ * Erik Gilling <konkers@google.com>
+ * Benoit Goby <benoit@android.com>
+ * Venu Byravarasu <vbyravarasu@nvidia.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/resource.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/usb/of.h>
+#include <linux/usb/ehci_def.h>
+#include <linux/usb/tegra_usb_phy.h>
+#include <linux/regulator/consumer.h>
+
+#define ULPI_VIEWPORT 0x170
+
+/* PORTSC PTS/PHCD bits, Tegra20 only */
+#define TEGRA_USB_PORTSC1 0x184
+#define TEGRA_USB_PORTSC1_PTS(x) (((x) & 0x3) << 30)
+#define TEGRA_USB_PORTSC1_PHCD (1 << 23)
+
+/* HOSTPC1 PTS/PHCD bits, Tegra30 and above */
+#define TEGRA_USB_HOSTPC1_DEVLC 0x1b4
+#define TEGRA_USB_HOSTPC1_DEVLC_PTS(x) (((x) & 0x7) << 29)
+#define TEGRA_USB_HOSTPC1_DEVLC_PHCD (1 << 22)
+
+/* Bits of PORTSC1, which will get cleared by writing 1 into them */
+#define TEGRA_PORTSC1_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC)
+
+#define USB_SUSP_CTRL 0x400
+#define USB_WAKE_ON_CNNT_EN_DEV (1 << 3)
+#define USB_WAKE_ON_DISCON_EN_DEV (1 << 4)
+#define USB_SUSP_CLR (1 << 5)
+#define USB_PHY_CLK_VALID (1 << 7)
+#define UTMIP_RESET (1 << 11)
+#define UHSIC_RESET (1 << 11)
+#define UTMIP_PHY_ENABLE (1 << 12)
+#define ULPI_PHY_ENABLE (1 << 13)
+#define USB_SUSP_SET (1 << 14)
+#define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16)
+
+#define USB1_LEGACY_CTRL 0x410
+#define USB1_NO_LEGACY_MODE (1 << 0)
+#define USB1_VBUS_SENSE_CTL_MASK (3 << 1)
+#define USB1_VBUS_SENSE_CTL_VBUS_WAKEUP (0 << 1)
+#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \
+ (1 << 1)
+#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD (2 << 1)
+#define USB1_VBUS_SENSE_CTL_A_SESS_VLD (3 << 1)
+
+#define ULPI_TIMING_CTRL_0 0x424
+#define ULPI_OUTPUT_PINMUX_BYP (1 << 10)
+#define ULPI_CLKOUT_PINMUX_BYP (1 << 11)
+
+#define ULPI_TIMING_CTRL_1 0x428
+#define ULPI_DATA_TRIMMER_LOAD (1 << 0)
+#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1)
+#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16)
+#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17)
+#define ULPI_DIR_TRIMMER_LOAD (1 << 24)
+#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25)
+
+#define UTMIP_PLL_CFG1 0x804
+#define UTMIP_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
+#define UTMIP_PLLU_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27)
+
+#define UTMIP_XCVR_CFG0 0x808
+#define UTMIP_XCVR_SETUP(x) (((x) & 0xf) << 0)
+#define UTMIP_XCVR_SETUP_MSB(x) ((((x) & 0x70) >> 4) << 22)
+#define UTMIP_XCVR_LSRSLEW(x) (((x) & 0x3) << 8)
+#define UTMIP_XCVR_LSFSLEW(x) (((x) & 0x3) << 10)
+#define UTMIP_FORCE_PD_POWERDOWN (1 << 14)
+#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16)
+#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18)
+#define UTMIP_XCVR_LSBIAS_SEL (1 << 21)
+#define UTMIP_XCVR_HSSLEW(x) (((x) & 0x3) << 4)
+#define UTMIP_XCVR_HSSLEW_MSB(x) ((((x) & 0x1fc) >> 2) << 25)
+
+#define UTMIP_BIAS_CFG0 0x80c
+#define UTMIP_OTGPD (1 << 11)
+#define UTMIP_BIASPD (1 << 10)
+#define UTMIP_HSSQUELCH_LEVEL(x) (((x) & 0x3) << 0)
+#define UTMIP_HSDISCON_LEVEL(x) (((x) & 0x3) << 2)
+#define UTMIP_HSDISCON_LEVEL_MSB(x) ((((x) & 0x4) >> 2) << 24)
+
+#define UTMIP_HSRX_CFG0 0x810
+#define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10)
+#define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15)
+
+#define UTMIP_HSRX_CFG1 0x814
+#define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1)
+
+#define UTMIP_TX_CFG0 0x820
+#define UTMIP_FS_PREABMLE_J (1 << 19)
+#define UTMIP_HS_DISCON_DISABLE (1 << 8)
+
+#define UTMIP_MISC_CFG0 0x824
+#define UTMIP_DPDM_OBSERVE (1 << 26)
+#define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27)
+#define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf)
+#define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe)
+#define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd)
+#define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc)
+#define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22)
+
+#define UTMIP_MISC_CFG1 0x828
+#define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18)
+#define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6)
+
+#define UTMIP_DEBOUNCE_CFG0 0x82c
+#define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0)
+
+#define UTMIP_BAT_CHRG_CFG0 0x830
+#define UTMIP_PD_CHRG (1 << 0)
+
+#define UTMIP_SPARE_CFG0 0x834
+#define FUSE_SETUP_SEL (1 << 3)
+
+#define UTMIP_XCVR_CFG1 0x838
+#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0)
+#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2)
+#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4)
+#define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18)
+
+#define UTMIP_BIAS_CFG1 0x83c
+#define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3)
+
+/* For Tegra30 and above only, the address is different in Tegra20 */
+#define USB_USBMODE 0x1f8
+#define USB_USBMODE_MASK (3 << 0)
+#define USB_USBMODE_HOST (3 << 0)
+#define USB_USBMODE_DEVICE (2 << 0)
+
+static DEFINE_SPINLOCK(utmip_pad_lock);
+static int utmip_pad_count;
+
+struct tegra_xtal_freq {
+ int freq;
+ u8 enable_delay;
+ u8 stable_count;
+ u8 active_delay;
+ u8 xtal_freq_count;
+ u16 debounce;
+};
+
+static const struct tegra_xtal_freq tegra_freq_table[] = {
+ {
+ .freq = 12000000,
+ .enable_delay = 0x02,
+ .stable_count = 0x2F,
+ .active_delay = 0x04,
+ .xtal_freq_count = 0x76,
+ .debounce = 0x7530,
+ },
+ {
+ .freq = 13000000,
+ .enable_delay = 0x02,
+ .stable_count = 0x33,
+ .active_delay = 0x05,
+ .xtal_freq_count = 0x7F,
+ .debounce = 0x7EF4,
+ },
+ {
+ .freq = 19200000,
+ .enable_delay = 0x03,
+ .stable_count = 0x4B,
+ .active_delay = 0x06,
+ .xtal_freq_count = 0xBB,
+ .debounce = 0xBB80,
+ },
+ {
+ .freq = 26000000,
+ .enable_delay = 0x04,
+ .stable_count = 0x66,
+ .active_delay = 0x09,
+ .xtal_freq_count = 0xFE,
+ .debounce = 0xFDE8,
+ },
+};
+
+static void set_pts(struct tegra_usb_phy *phy, u8 pts_val)
+{
+ void __iomem *base = phy->regs;
+ unsigned long val;
+
+ if (phy->soc_config->has_hostpc) {
+ val = readl(base + TEGRA_USB_HOSTPC1_DEVLC);
+ val &= ~TEGRA_USB_HOSTPC1_DEVLC_PTS(~0);
+ val |= TEGRA_USB_HOSTPC1_DEVLC_PTS(pts_val);
+ writel(val, base + TEGRA_USB_HOSTPC1_DEVLC);
+ } else {
+ val = readl(base + TEGRA_USB_PORTSC1) & ~TEGRA_PORTSC1_RWC_BITS;
+ val &= ~TEGRA_USB_PORTSC1_PTS(~0);
+ val |= TEGRA_USB_PORTSC1_PTS(pts_val);
+ writel(val, base + TEGRA_USB_PORTSC1);
+ }
+}
+
+static void set_phcd(struct tegra_usb_phy *phy, bool enable)
+{
+ void __iomem *base = phy->regs;
+ unsigned long val;
+
+ if (phy->soc_config->has_hostpc) {
+ val = readl(base + TEGRA_USB_HOSTPC1_DEVLC);
+ if (enable)
+ val |= TEGRA_USB_HOSTPC1_DEVLC_PHCD;
+ else
+ val &= ~TEGRA_USB_HOSTPC1_DEVLC_PHCD;
+ writel(val, base + TEGRA_USB_HOSTPC1_DEVLC);
+ } else {
+ val = readl(base + TEGRA_USB_PORTSC1) & ~PORT_RWC_BITS;
+ if (enable)
+ val |= TEGRA_USB_PORTSC1_PHCD;
+ else
+ val &= ~TEGRA_USB_PORTSC1_PHCD;
+ writel(val, base + TEGRA_USB_PORTSC1);
+ }
+}
+
+static int utmip_pad_open(struct tegra_usb_phy *phy)
+{
+ phy->pad_clk = devm_clk_get(phy->u_phy.dev, "utmi-pads");
+ if (IS_ERR(phy->pad_clk)) {
+ pr_err("%s: can't get utmip pad clock\n", __func__);
+ return PTR_ERR(phy->pad_clk);
+ }
+
+ return 0;
+}
+
+static void utmip_pad_power_on(struct tegra_usb_phy *phy)
+{
+ unsigned long val, flags;
+ void __iomem *base = phy->pad_regs;
+ struct tegra_utmip_config *config = phy->config;
+
+ clk_prepare_enable(phy->pad_clk);
+
+ spin_lock_irqsave(&utmip_pad_lock, flags);
+
+ if (utmip_pad_count++ == 0) {
+ val = readl(base + UTMIP_BIAS_CFG0);
+ val &= ~(UTMIP_OTGPD | UTMIP_BIASPD);
+
+ if (phy->soc_config->requires_extra_tuning_parameters) {
+ val &= ~(UTMIP_HSSQUELCH_LEVEL(~0) |
+ UTMIP_HSDISCON_LEVEL(~0) |
+ UTMIP_HSDISCON_LEVEL_MSB(~0));
+
+ val |= UTMIP_HSSQUELCH_LEVEL(config->hssquelch_level);
+ val |= UTMIP_HSDISCON_LEVEL(config->hsdiscon_level);
+ val |= UTMIP_HSDISCON_LEVEL_MSB(config->hsdiscon_level);
+ }
+ writel(val, base + UTMIP_BIAS_CFG0);
+ }
+
+ spin_unlock_irqrestore(&utmip_pad_lock, flags);
+
+ clk_disable_unprepare(phy->pad_clk);
+}
+
+static int utmip_pad_power_off(struct tegra_usb_phy *phy)
+{
+ unsigned long val, flags;
+ void __iomem *base = phy->pad_regs;
+
+ if (!utmip_pad_count) {
+ pr_err("%s: utmip pad already powered off\n", __func__);
+ return -EINVAL;
+ }
+
+ clk_prepare_enable(phy->pad_clk);
+
+ spin_lock_irqsave(&utmip_pad_lock, flags);
+
+ if (--utmip_pad_count == 0) {
+ val = readl(base + UTMIP_BIAS_CFG0);
+ val |= UTMIP_OTGPD | UTMIP_BIASPD;
+ writel(val, base + UTMIP_BIAS_CFG0);
+ }
+
+ spin_unlock_irqrestore(&utmip_pad_lock, flags);
+
+ clk_disable_unprepare(phy->pad_clk);
+
+ return 0;
+}
+
+static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result)
+{
+ unsigned long timeout = 2000;
+ do {
+ if ((readl(reg) & mask) == result)
+ return 0;
+ udelay(1);
+ timeout--;
+ } while (timeout);
+ return -1;
+}
+
+static void utmi_phy_clk_disable(struct tegra_usb_phy *phy)
+{
+ unsigned long val;
+ void __iomem *base = phy->regs;
+
+ if (phy->is_legacy_phy) {
+ val = readl(base + USB_SUSP_CTRL);
+ val |= USB_SUSP_SET;
+ writel(val, base + USB_SUSP_CTRL);
+
+ udelay(10);
+
+ val = readl(base + USB_SUSP_CTRL);
+ val &= ~USB_SUSP_SET;
+ writel(val, base + USB_SUSP_CTRL);
+ } else
+ set_phcd(phy, true);
+
+ if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0)
+ pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
+}
+
+static void utmi_phy_clk_enable(struct tegra_usb_phy *phy)
+{
+ unsigned long val;
+ void __iomem *base = phy->regs;
+
+ if (phy->is_legacy_phy) {
+ val = readl(base + USB_SUSP_CTRL);
+ val |= USB_SUSP_CLR;
+ writel(val, base + USB_SUSP_CTRL);
+
+ udelay(10);
+
+ val = readl(base + USB_SUSP_CTRL);
+ val &= ~USB_SUSP_CLR;
+ writel(val, base + USB_SUSP_CTRL);
+ } else
+ set_phcd(phy, false);
+
+ if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID,
+ USB_PHY_CLK_VALID))
+ pr_err("%s: timeout waiting for phy to stabilize\n", __func__);
+}
+
+static int utmi_phy_power_on(struct tegra_usb_phy *phy)
+{
+ unsigned long val;
+ void __iomem *base = phy->regs;
+ struct tegra_utmip_config *config = phy->config;
+
+ val = readl(base + USB_SUSP_CTRL);
+ val |= UTMIP_RESET;
+ writel(val, base + USB_SUSP_CTRL);
+
+ if (phy->is_legacy_phy) {
+ val = readl(base + USB1_LEGACY_CTRL);
+ val |= USB1_NO_LEGACY_MODE;
+ writel(val, base + USB1_LEGACY_CTRL);
+ }
+
+ val = readl(base + UTMIP_TX_CFG0);
+ val |= UTMIP_FS_PREABMLE_J;
+ writel(val, base + UTMIP_TX_CFG0);
+
+ val = readl(base + UTMIP_HSRX_CFG0);
+ val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0));
+ val |= UTMIP_IDLE_WAIT(config->idle_wait_delay);
+ val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit);
+ writel(val, base + UTMIP_HSRX_CFG0);
+
+ val = readl(base + UTMIP_HSRX_CFG1);
+ val &= ~UTMIP_HS_SYNC_START_DLY(~0);
+ val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay);
+ writel(val, base + UTMIP_HSRX_CFG1);
+
+ val = readl(base + UTMIP_DEBOUNCE_CFG0);
+ val &= ~UTMIP_BIAS_DEBOUNCE_A(~0);
+ val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce);
+ writel(val, base + UTMIP_DEBOUNCE_CFG0);
+
+ val = readl(base + UTMIP_MISC_CFG0);
+ val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE;
+ writel(val, base + UTMIP_MISC_CFG0);
+
+ if (!phy->soc_config->utmi_pll_config_in_car_module) {
+ val = readl(base + UTMIP_MISC_CFG1);
+ val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) |
+ UTMIP_PLLU_STABLE_COUNT(~0));
+ val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) |
+ UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count);
+ writel(val, base + UTMIP_MISC_CFG1);
+
+ val = readl(base + UTMIP_PLL_CFG1);
+ val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) |
+ UTMIP_PLLU_ENABLE_DLY_COUNT(~0));
+ val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) |
+ UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay);
+ writel(val, base + UTMIP_PLL_CFG1);
+ }
+
+ if (phy->mode == USB_DR_MODE_PERIPHERAL) {
+ val = readl(base + USB_SUSP_CTRL);
+ val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV);
+ writel(val, base + USB_SUSP_CTRL);
+
+ val = readl(base + UTMIP_BAT_CHRG_CFG0);
+ val &= ~UTMIP_PD_CHRG;
+ writel(val, base + UTMIP_BAT_CHRG_CFG0);
+ } else {
+ val = readl(base + UTMIP_BAT_CHRG_CFG0);
+ val |= UTMIP_PD_CHRG;
+ writel(val, base + UTMIP_BAT_CHRG_CFG0);
+ }
+
+ utmip_pad_power_on(phy);
+
+ val = readl(base + UTMIP_XCVR_CFG0);
+ val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
+ UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_LSBIAS_SEL |
+ UTMIP_XCVR_SETUP(~0) | UTMIP_XCVR_SETUP_MSB(~0) |
+ UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0));
+
+ if (!config->xcvr_setup_use_fuses) {
+ val |= UTMIP_XCVR_SETUP(config->xcvr_setup);
+ val |= UTMIP_XCVR_SETUP_MSB(config->xcvr_setup);
+ }
+ val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew);
+ val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew);
+
+ if (phy->soc_config->requires_extra_tuning_parameters) {
+ val &= ~(UTMIP_XCVR_HSSLEW(~0) | UTMIP_XCVR_HSSLEW_MSB(~0));
+ val |= UTMIP_XCVR_HSSLEW(config->xcvr_hsslew);
+ val |= UTMIP_XCVR_HSSLEW_MSB(config->xcvr_hsslew);
+ }
+ writel(val, base + UTMIP_XCVR_CFG0);
+
+ val = readl(base + UTMIP_XCVR_CFG1);
+ val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
+ UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0));
+ val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj);
+ writel(val, base + UTMIP_XCVR_CFG1);
+
+ val = readl(base + UTMIP_BIAS_CFG1);
+ val &= ~UTMIP_BIAS_PDTRK_COUNT(~0);
+ val |= UTMIP_BIAS_PDTRK_COUNT(0x5);
+ writel(val, base + UTMIP_BIAS_CFG1);
+
+ val = readl(base + UTMIP_SPARE_CFG0);
+ if (config->xcvr_setup_use_fuses)
+ val |= FUSE_SETUP_SEL;
+ else
+ val &= ~FUSE_SETUP_SEL;
+ writel(val, base + UTMIP_SPARE_CFG0);
+
+ if (!phy->is_legacy_phy) {
+ val = readl(base + USB_SUSP_CTRL);
+ val |= UTMIP_PHY_ENABLE;
+ writel(val, base + USB_SUSP_CTRL);
+ }
+
+ val = readl(base + USB_SUSP_CTRL);
+ val &= ~UTMIP_RESET;
+ writel(val, base + USB_SUSP_CTRL);
+
+ if (phy->is_legacy_phy) {
+ val = readl(base + USB1_LEGACY_CTRL);
+ val &= ~USB1_VBUS_SENSE_CTL_MASK;
+ val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD;
+ writel(val, base + USB1_LEGACY_CTRL);
+
+ val = readl(base + USB_SUSP_CTRL);
+ val &= ~USB_SUSP_SET;
+ writel(val, base + USB_SUSP_CTRL);
+ }
+
+ utmi_phy_clk_enable(phy);
+
+ if (phy->soc_config->requires_usbmode_setup) {
+ val = readl(base + USB_USBMODE);
+ val &= ~USB_USBMODE_MASK;
+ if (phy->mode == USB_DR_MODE_HOST)
+ val |= USB_USBMODE_HOST;
+ else
+ val |= USB_USBMODE_DEVICE;
+ writel(val, base + USB_USBMODE);
+ }
+
+ if (!phy->is_legacy_phy)
+ set_pts(phy, 0);
+
+ return 0;
+}
+
+static int utmi_phy_power_off(struct tegra_usb_phy *phy)
+{
+ unsigned long val;
+ void __iomem *base = phy->regs;
+
+ utmi_phy_clk_disable(phy);
+
+ if (phy->mode == USB_DR_MODE_PERIPHERAL) {
+ val = readl(base + USB_SUSP_CTRL);
+ val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0);
+ val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5);
+ writel(val, base + USB_SUSP_CTRL);
+ }
+
+ val = readl(base + USB_SUSP_CTRL);
+ val |= UTMIP_RESET;
+ writel(val, base + USB_SUSP_CTRL);
+
+ val = readl(base + UTMIP_BAT_CHRG_CFG0);
+ val |= UTMIP_PD_CHRG;
+ writel(val, base + UTMIP_BAT_CHRG_CFG0);
+
+ val = readl(base + UTMIP_XCVR_CFG0);
+ val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN |
+ UTMIP_FORCE_PDZI_POWERDOWN;
+ writel(val, base + UTMIP_XCVR_CFG0);
+
+ val = readl(base + UTMIP_XCVR_CFG1);
+ val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN |
+ UTMIP_FORCE_PDDR_POWERDOWN;
+ writel(val, base + UTMIP_XCVR_CFG1);
+
+ return utmip_pad_power_off(phy);
+}
+
+static void utmi_phy_preresume(struct tegra_usb_phy *phy)
+{
+ unsigned long val;
+ void __iomem *base = phy->regs;
+
+ val = readl(base + UTMIP_TX_CFG0);
+ val |= UTMIP_HS_DISCON_DISABLE;
+ writel(val, base + UTMIP_TX_CFG0);
+}
+
+static void utmi_phy_postresume(struct tegra_usb_phy *phy)
+{
+ unsigned long val;
+ void __iomem *base = phy->regs;
+
+ val = readl(base + UTMIP_TX_CFG0);
+ val &= ~UTMIP_HS_DISCON_DISABLE;
+ writel(val, base + UTMIP_TX_CFG0);
+}
+
+static void utmi_phy_restore_start(struct tegra_usb_phy *phy,
+ enum tegra_usb_phy_port_speed port_speed)
+{
+ unsigned long val;
+ void __iomem *base = phy->regs;
+
+ val = readl(base + UTMIP_MISC_CFG0);
+ val &= ~UTMIP_DPDM_OBSERVE_SEL(~0);
+ if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW)
+ val |= UTMIP_DPDM_OBSERVE_SEL_FS_K;
+ else
+ val |= UTMIP_DPDM_OBSERVE_SEL_FS_J;
+ writel(val, base + UTMIP_MISC_CFG0);
+ udelay(1);
+
+ val = readl(base + UTMIP_MISC_CFG0);
+ val |= UTMIP_DPDM_OBSERVE;
+ writel(val, base + UTMIP_MISC_CFG0);
+ udelay(10);
+}
+
+static void utmi_phy_restore_end(struct tegra_usb_phy *phy)
+{
+ unsigned long val;
+ void __iomem *base = phy->regs;
+
+ val = readl(base + UTMIP_MISC_CFG0);
+ val &= ~UTMIP_DPDM_OBSERVE;
+ writel(val, base + UTMIP_MISC_CFG0);
+ udelay(10);
+}
+
+static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
+{
+ int ret;
+ unsigned long val;
+ void __iomem *base = phy->regs;
+
+ ret = gpio_direction_output(phy->reset_gpio, 0);
+ if (ret < 0) {
+ dev_err(phy->u_phy.dev, "gpio %d not set to 0\n",
+ phy->reset_gpio);
+ return ret;
+ }
+ msleep(5);
+ ret = gpio_direction_output(phy->reset_gpio, 1);
+ if (ret < 0) {
+ dev_err(phy->u_phy.dev, "gpio %d not set to 1\n",
+ phy->reset_gpio);
+ return ret;
+ }
+
+ clk_prepare_enable(phy->clk);
+ msleep(1);
+
+ val = readl(base + USB_SUSP_CTRL);
+ val |= UHSIC_RESET;
+ writel(val, base + USB_SUSP_CTRL);
+
+ val = readl(base + ULPI_TIMING_CTRL_0);
+ val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP;
+ writel(val, base + ULPI_TIMING_CTRL_0);
+
+ val = readl(base + USB_SUSP_CTRL);
+ val |= ULPI_PHY_ENABLE;
+ writel(val, base + USB_SUSP_CTRL);
+
+ val = 0;
+ writel(val, base + ULPI_TIMING_CTRL_1);
+
+ val |= ULPI_DATA_TRIMMER_SEL(4);
+ val |= ULPI_STPDIRNXT_TRIMMER_SEL(4);
+ val |= ULPI_DIR_TRIMMER_SEL(4);
+ writel(val, base + ULPI_TIMING_CTRL_1);
+ udelay(10);
+
+ val |= ULPI_DATA_TRIMMER_LOAD;
+ val |= ULPI_STPDIRNXT_TRIMMER_LOAD;
+ val |= ULPI_DIR_TRIMMER_LOAD;
+ writel(val, base + ULPI_TIMING_CTRL_1);
+
+ /* Fix VbusInvalid due to floating VBUS */
+ ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08);
+ if (ret) {
+ pr_err("%s: ulpi write failed\n", __func__);
+ return ret;
+ }
+
+ ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B);
+ if (ret) {
+ pr_err("%s: ulpi write failed\n", __func__);
+ return ret;
+ }
+
+ val = readl(base + USB_SUSP_CTRL);
+ val |= USB_SUSP_CLR;
+ writel(val, base + USB_SUSP_CTRL);
+ udelay(100);
+
+ val = readl(base + USB_SUSP_CTRL);
+ val &= ~USB_SUSP_CLR;
+ writel(val, base + USB_SUSP_CTRL);
+
+ return 0;
+}
+
+static int ulpi_phy_power_off(struct tegra_usb_phy *phy)
+{
+ clk_disable(phy->clk);
+ return gpio_direction_output(phy->reset_gpio, 0);
+}
+
+static void tegra_usb_phy_close(struct tegra_usb_phy *phy)
+{
+ if (!IS_ERR(phy->vbus))
+ regulator_disable(phy->vbus);
+
+ clk_disable_unprepare(phy->pll_u);
+}
+
+static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy)
+{
+ if (phy->is_ulpi_phy)
+ return ulpi_phy_power_on(phy);
+ else
+ return utmi_phy_power_on(phy);
+}
+
+static int tegra_usb_phy_power_off(struct tegra_usb_phy *phy)
+{
+ if (phy->is_ulpi_phy)
+ return ulpi_phy_power_off(phy);
+ else
+ return utmi_phy_power_off(phy);
+}
+
+static int tegra_usb_phy_suspend(struct usb_phy *x, int suspend)
+{
+ struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
+ if (suspend)
+ return tegra_usb_phy_power_off(phy);
+ else
+ return tegra_usb_phy_power_on(phy);
+}
+
+static int ulpi_open(struct tegra_usb_phy *phy)
+{
+ int err;
+
+ phy->clk = devm_clk_get(phy->u_phy.dev, "ulpi-link");
+ if (IS_ERR(phy->clk)) {
+ pr_err("%s: can't get ulpi clock\n", __func__);
+ return PTR_ERR(phy->clk);
+ }
+
+ err = devm_gpio_request(phy->u_phy.dev, phy->reset_gpio,
+ "ulpi_phy_reset_b");
+ if (err < 0) {
+ dev_err(phy->u_phy.dev, "request failed for gpio: %d\n",
+ phy->reset_gpio);
+ return err;
+ }
+
+ err = gpio_direction_output(phy->reset_gpio, 0);
+ if (err < 0) {
+ dev_err(phy->u_phy.dev, "gpio %d direction not set to output\n",
+ phy->reset_gpio);
+ return err;
+ }
+
+ phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0);
+ if (!phy->ulpi) {
+ dev_err(phy->u_phy.dev, "otg_ulpi_create returned NULL\n");
+ err = -ENOMEM;
+ return err;
+ }
+
+ phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT;
+ return 0;
+}
+
+static int tegra_usb_phy_init(struct tegra_usb_phy *phy)
+{
+ unsigned long parent_rate;
+ int i;
+ int err;
+
+ phy->pll_u = devm_clk_get(phy->u_phy.dev, "pll_u");
+ if (IS_ERR(phy->pll_u)) {
+ pr_err("Can't get pll_u clock\n");
+ return PTR_ERR(phy->pll_u);
+ }
+
+ err = clk_prepare_enable(phy->pll_u);
+ if (err)
+ return err;
+
+ parent_rate = clk_get_rate(clk_get_parent(phy->pll_u));
+ for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) {
+ if (tegra_freq_table[i].freq == parent_rate) {
+ phy->freq = &tegra_freq_table[i];
+ break;
+ }
+ }
+ if (!phy->freq) {
+ pr_err("invalid pll_u parent rate %ld\n", parent_rate);
+ err = -EINVAL;
+ goto fail;
+ }
+
+ if (!IS_ERR(phy->vbus)) {
+ err = regulator_enable(phy->vbus);
+ if (err) {
+ dev_err(phy->u_phy.dev,
+ "failed to enable usb vbus regulator: %d\n",
+ err);
+ goto fail;
+ }
+ }
+
+ if (phy->is_ulpi_phy)
+ err = ulpi_open(phy);
+ else
+ err = utmip_pad_open(phy);
+ if (err < 0)
+ goto fail;
+
+ return 0;
+
+fail:
+ clk_disable_unprepare(phy->pll_u);
+ return err;
+}
+
+void tegra_usb_phy_preresume(struct usb_phy *x)
+{
+ struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
+
+ if (!phy->is_ulpi_phy)
+ utmi_phy_preresume(phy);
+}
+EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume);
+
+void tegra_usb_phy_postresume(struct usb_phy *x)
+{
+ struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
+
+ if (!phy->is_ulpi_phy)
+ utmi_phy_postresume(phy);
+}
+EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume);
+
+void tegra_ehci_phy_restore_start(struct usb_phy *x,
+ enum tegra_usb_phy_port_speed port_speed)
+{
+ struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
+
+ if (!phy->is_ulpi_phy)
+ utmi_phy_restore_start(phy, port_speed);
+}
+EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start);
+
+void tegra_ehci_phy_restore_end(struct usb_phy *x)
+{
+ struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy);
+
+ if (!phy->is_ulpi_phy)
+ utmi_phy_restore_end(phy);
+}
+EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end);
+
+static int read_utmi_param(struct platform_device *pdev, const char *param,
+ u8 *dest)
+{
+ u32 value;
+ int err = of_property_read_u32(pdev->dev.of_node, param, &value);
+ *dest = (u8)value;
+ if (err < 0)
+ dev_err(&pdev->dev, "Failed to read USB UTMI parameter %s: %d\n",
+ param, err);
+ return err;
+}
+
+static int utmi_phy_probe(struct tegra_usb_phy *tegra_phy,
+ struct platform_device *pdev)
+{
+ struct resource *res;
+ int err;
+ struct tegra_utmip_config *config;
+
+ tegra_phy->is_ulpi_phy = false;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get UTMI Pad regs\n");
+ return -ENXIO;
+ }
+
+ tegra_phy->pad_regs = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (!tegra_phy->pad_regs) {
+ dev_err(&pdev->dev, "Failed to remap UTMI Pad regs\n");
+ return -ENOMEM;
+ }
+
+ tegra_phy->config = devm_kzalloc(&pdev->dev, sizeof(*config),
+ GFP_KERNEL);
+ if (!tegra_phy->config)
+ return -ENOMEM;
+
+ config = tegra_phy->config;
+
+ err = read_utmi_param(pdev, "nvidia,hssync-start-delay",
+ &config->hssync_start_delay);
+ if (err < 0)
+ return err;
+
+ err = read_utmi_param(pdev, "nvidia,elastic-limit",
+ &config->elastic_limit);
+ if (err < 0)
+ return err;
+
+ err = read_utmi_param(pdev, "nvidia,idle-wait-delay",
+ &config->idle_wait_delay);
+ if (err < 0)
+ return err;
+
+ err = read_utmi_param(pdev, "nvidia,term-range-adj",
+ &config->term_range_adj);
+ if (err < 0)
+ return err;
+
+ err = read_utmi_param(pdev, "nvidia,xcvr-lsfslew",
+ &config->xcvr_lsfslew);
+ if (err < 0)
+ return err;
+
+ err = read_utmi_param(pdev, "nvidia,xcvr-lsrslew",
+ &config->xcvr_lsrslew);
+ if (err < 0)
+ return err;
+
+ if (tegra_phy->soc_config->requires_extra_tuning_parameters) {
+ err = read_utmi_param(pdev, "nvidia,xcvr-hsslew",
+ &config->xcvr_hsslew);
+ if (err < 0)
+ return err;
+
+ err = read_utmi_param(pdev, "nvidia,hssquelch-level",
+ &config->hssquelch_level);
+ if (err < 0)
+ return err;
+
+ err = read_utmi_param(pdev, "nvidia,hsdiscon-level",
+ &config->hsdiscon_level);
+ if (err < 0)
+ return err;
+ }
+
+ config->xcvr_setup_use_fuses = of_property_read_bool(
+ pdev->dev.of_node, "nvidia,xcvr-setup-use-fuses");
+
+ if (!config->xcvr_setup_use_fuses) {
+ err = read_utmi_param(pdev, "nvidia,xcvr-setup",
+ &config->xcvr_setup);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+static const struct tegra_phy_soc_config tegra20_soc_config = {
+ .utmi_pll_config_in_car_module = false,
+ .has_hostpc = false,
+ .requires_usbmode_setup = false,
+ .requires_extra_tuning_parameters = false,
+};
+
+static const struct tegra_phy_soc_config tegra30_soc_config = {
+ .utmi_pll_config_in_car_module = true,
+ .has_hostpc = true,
+ .requires_usbmode_setup = true,
+ .requires_extra_tuning_parameters = true,
+};
+
+static const struct of_device_id tegra_usb_phy_id_table[] = {
+ { .compatible = "nvidia,tegra30-usb-phy", .data = &tegra30_soc_config },
+ { .compatible = "nvidia,tegra20-usb-phy", .data = &tegra20_soc_config },
+ { },
+};
+MODULE_DEVICE_TABLE(of, tegra_usb_phy_id_table);
+
+static int tegra_usb_phy_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct resource *res;
+ struct tegra_usb_phy *tegra_phy = NULL;
+ struct device_node *np = pdev->dev.of_node;
+ enum usb_phy_interface phy_type;
+ int err;
+
+ tegra_phy = devm_kzalloc(&pdev->dev, sizeof(*tegra_phy), GFP_KERNEL);
+ if (!tegra_phy)
+ return -ENOMEM;
+
+ match = of_match_device(tegra_usb_phy_id_table, &pdev->dev);
+ if (!match) {
+ dev_err(&pdev->dev, "Error: No device match found\n");
+ return -ENODEV;
+ }
+ tegra_phy->soc_config = match->data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get I/O memory\n");
+ return -ENXIO;
+ }
+
+ tegra_phy->regs = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (!tegra_phy->regs) {
+ dev_err(&pdev->dev, "Failed to remap I/O memory\n");
+ return -ENOMEM;
+ }
+
+ tegra_phy->is_legacy_phy =
+ of_property_read_bool(np, "nvidia,has-legacy-mode");
+
+ phy_type = of_usb_get_phy_mode(np);
+ switch (phy_type) {
+ case USBPHY_INTERFACE_MODE_UTMI:
+ err = utmi_phy_probe(tegra_phy, pdev);
+ if (err < 0)
+ return err;
+ break;
+
+ case USBPHY_INTERFACE_MODE_ULPI:
+ tegra_phy->is_ulpi_phy = true;
+
+ tegra_phy->reset_gpio =
+ of_get_named_gpio(np, "nvidia,phy-reset-gpio", 0);
+ if (!gpio_is_valid(tegra_phy->reset_gpio)) {
+ dev_err(&pdev->dev, "invalid gpio: %d\n",
+ tegra_phy->reset_gpio);
+ return tegra_phy->reset_gpio;
+ }
+ tegra_phy->config = NULL;
+ break;
+
+ default:
+ dev_err(&pdev->dev, "phy_type is invalid or unsupported\n");
+ return -EINVAL;
+ }
+
+ if (of_find_property(np, "dr_mode", NULL))
+ tegra_phy->mode = of_usb_get_dr_mode(np);
+ else
+ tegra_phy->mode = USB_DR_MODE_HOST;
+
+ if (tegra_phy->mode == USB_DR_MODE_UNKNOWN) {
+ dev_err(&pdev->dev, "dr_mode is invalid\n");
+ return -EINVAL;
+ }
+
+ /* On some boards, the VBUS regulator doesn't need to be controlled */
+ if (of_find_property(np, "vbus-supply", NULL)) {
+ tegra_phy->vbus = devm_regulator_get(&pdev->dev, "vbus");
+ if (IS_ERR(tegra_phy->vbus))
+ return PTR_ERR(tegra_phy->vbus);
+ } else {
+ dev_notice(&pdev->dev, "no vbus regulator");
+ tegra_phy->vbus = ERR_PTR(-ENODEV);
+ }
+
+ tegra_phy->u_phy.dev = &pdev->dev;
+ err = tegra_usb_phy_init(tegra_phy);
+ if (err < 0)
+ return err;
+
+ tegra_phy->u_phy.set_suspend = tegra_usb_phy_suspend;
+
+ platform_set_drvdata(pdev, tegra_phy);
+
+ err = usb_add_phy_dev(&tegra_phy->u_phy);
+ if (err < 0) {
+ tegra_usb_phy_close(tegra_phy);
+ return err;
+ }
+
+ return 0;
+}
+
+static int tegra_usb_phy_remove(struct platform_device *pdev)
+{
+ struct tegra_usb_phy *tegra_phy = platform_get_drvdata(pdev);
+
+ usb_remove_phy(&tegra_phy->u_phy);
+ tegra_usb_phy_close(tegra_phy);
+
+ return 0;
+}
+
+static struct platform_driver tegra_usb_phy_driver = {
+ .probe = tegra_usb_phy_probe,
+ .remove = tegra_usb_phy_remove,
+ .driver = {
+ .name = "tegra-phy",
+ .of_match_table = tegra_usb_phy_id_table,
+ },
+};
+module_platform_driver(tegra_usb_phy_driver);
+
+MODULE_DESCRIPTION("Tegra USB PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/usb/phy/phy-twl6030-usb.c b/kernel/drivers/usb/phy/phy-twl6030-usb.c
new file mode 100644
index 000000000..12741856a
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-twl6030-usb.c
@@ -0,0 +1,452 @@
+/*
+ * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Hema HK <hemahk@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/usb/musb-omap.h>
+#include <linux/usb/phy_companion.h>
+#include <linux/phy/omap_usb.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+
+/* usb register definitions */
+#define USB_VENDOR_ID_LSB 0x00
+#define USB_VENDOR_ID_MSB 0x01
+#define USB_PRODUCT_ID_LSB 0x02
+#define USB_PRODUCT_ID_MSB 0x03
+#define USB_VBUS_CTRL_SET 0x04
+#define USB_VBUS_CTRL_CLR 0x05
+#define USB_ID_CTRL_SET 0x06
+#define USB_ID_CTRL_CLR 0x07
+#define USB_VBUS_INT_SRC 0x08
+#define USB_VBUS_INT_LATCH_SET 0x09
+#define USB_VBUS_INT_LATCH_CLR 0x0A
+#define USB_VBUS_INT_EN_LO_SET 0x0B
+#define USB_VBUS_INT_EN_LO_CLR 0x0C
+#define USB_VBUS_INT_EN_HI_SET 0x0D
+#define USB_VBUS_INT_EN_HI_CLR 0x0E
+#define USB_ID_INT_SRC 0x0F
+#define USB_ID_INT_LATCH_SET 0x10
+#define USB_ID_INT_LATCH_CLR 0x11
+
+#define USB_ID_INT_EN_LO_SET 0x12
+#define USB_ID_INT_EN_LO_CLR 0x13
+#define USB_ID_INT_EN_HI_SET 0x14
+#define USB_ID_INT_EN_HI_CLR 0x15
+#define USB_OTG_ADP_CTRL 0x16
+#define USB_OTG_ADP_HIGH 0x17
+#define USB_OTG_ADP_LOW 0x18
+#define USB_OTG_ADP_RISE 0x19
+#define USB_OTG_REVISION 0x1A
+
+/* to be moved to LDO */
+#define TWL6030_MISC2 0xE5
+#define TWL6030_CFG_LDO_PD2 0xF5
+#define TWL6030_BACKUP_REG 0xFA
+
+#define STS_HW_CONDITIONS 0x21
+
+/* In module TWL6030_MODULE_PM_MASTER */
+#define STS_HW_CONDITIONS 0x21
+#define STS_USB_ID BIT(2)
+
+/* In module TWL6030_MODULE_PM_RECEIVER */
+#define VUSB_CFG_TRANS 0x71
+#define VUSB_CFG_STATE 0x72
+#define VUSB_CFG_VOLTAGE 0x73
+
+/* in module TWL6030_MODULE_MAIN_CHARGE */
+
+#define CHARGERUSB_CTRL1 0x8
+
+#define CONTROLLER_STAT1 0x03
+#define VBUS_DET BIT(2)
+
+struct twl6030_usb {
+ struct phy_companion comparator;
+ struct device *dev;
+
+ /* for vbus reporting with irqs disabled */
+ spinlock_t lock;
+
+ struct regulator *usb3v3;
+
+ /* used to set vbus, in atomic path */
+ struct work_struct set_vbus_work;
+
+ int irq1;
+ int irq2;
+ enum omap_musb_vbus_id_status linkstat;
+ u8 asleep;
+ bool vbus_enable;
+ const char *regulator;
+};
+
+#define comparator_to_twl(x) container_of((x), struct twl6030_usb, comparator)
+
+/*-------------------------------------------------------------------------*/
+
+static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module,
+ u8 data, u8 address)
+{
+ int ret = 0;
+
+ ret = twl_i2c_write_u8(module, data, address);
+ if (ret < 0)
+ dev_err(twl->dev,
+ "Write[0x%x] Error %d\n", address, ret);
+ return ret;
+}
+
+static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address)
+{
+ u8 data;
+ int ret;
+
+ ret = twl_i2c_read_u8(module, &data, address);
+ if (ret >= 0)
+ ret = data;
+ else
+ dev_err(twl->dev,
+ "readb[0x%x,0x%x] Error %d\n",
+ module, address, ret);
+ return ret;
+}
+
+static int twl6030_start_srp(struct phy_companion *comparator)
+{
+ struct twl6030_usb *twl = comparator_to_twl(comparator);
+
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x24, USB_VBUS_CTRL_SET);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x84, USB_VBUS_CTRL_SET);
+
+ mdelay(100);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0xa0, USB_VBUS_CTRL_CLR);
+
+ return 0;
+}
+
+static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
+{
+ /* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */
+ twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG);
+
+ /* Program CFG_LDO_PD2 register and set VUSB bit */
+ twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_CFG_LDO_PD2);
+
+ /* Program MISC2 register and set bit VUSB_IN_VBAT */
+ twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2);
+
+ twl->usb3v3 = regulator_get(twl->dev, twl->regulator);
+ if (IS_ERR(twl->usb3v3))
+ return -ENODEV;
+
+ /* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET);
+
+ /*
+ * Program the USB_ID_CTRL_SET register to enable GND drive
+ * and the ID comparators
+ */
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET);
+
+ return 0;
+}
+
+static ssize_t twl6030_usb_vbus_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct twl6030_usb *twl = dev_get_drvdata(dev);
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ spin_lock_irqsave(&twl->lock, flags);
+
+ switch (twl->linkstat) {
+ case OMAP_MUSB_VBUS_VALID:
+ ret = snprintf(buf, PAGE_SIZE, "vbus\n");
+ break;
+ case OMAP_MUSB_ID_GROUND:
+ ret = snprintf(buf, PAGE_SIZE, "id\n");
+ break;
+ case OMAP_MUSB_VBUS_OFF:
+ ret = snprintf(buf, PAGE_SIZE, "none\n");
+ break;
+ default:
+ ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
+ }
+ spin_unlock_irqrestore(&twl->lock, flags);
+
+ return ret;
+}
+static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL);
+
+static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
+{
+ struct twl6030_usb *twl = _twl;
+ enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
+ u8 vbus_state, hw_state;
+ int ret;
+
+ hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
+
+ vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE,
+ CONTROLLER_STAT1);
+ if (!(hw_state & STS_USB_ID)) {
+ if (vbus_state & VBUS_DET) {
+ ret = regulator_enable(twl->usb3v3);
+ if (ret)
+ dev_err(twl->dev, "Failed to enable usb3v3\n");
+
+ twl->asleep = 1;
+ status = OMAP_MUSB_VBUS_VALID;
+ twl->linkstat = status;
+ omap_musb_mailbox(status);
+ } else {
+ if (twl->linkstat != OMAP_MUSB_UNKNOWN) {
+ status = OMAP_MUSB_VBUS_OFF;
+ twl->linkstat = status;
+ omap_musb_mailbox(status);
+ if (twl->asleep) {
+ regulator_disable(twl->usb3v3);
+ twl->asleep = 0;
+ }
+ }
+ }
+ }
+ sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
+{
+ struct twl6030_usb *twl = _twl;
+ enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
+ u8 hw_state;
+ int ret;
+
+ hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
+
+ if (hw_state & STS_USB_ID) {
+ ret = regulator_enable(twl->usb3v3);
+ if (ret)
+ dev_err(twl->dev, "Failed to enable usb3v3\n");
+
+ twl->asleep = 1;
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
+ status = OMAP_MUSB_ID_GROUND;
+ twl->linkstat = status;
+ omap_musb_mailbox(status);
+ } else {
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
+ }
+ twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR);
+
+ return IRQ_HANDLED;
+}
+
+static int twl6030_enable_irq(struct twl6030_usb *twl)
+{
+ twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
+ twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
+ twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
+
+ twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
+ REG_INT_MSK_LINE_C);
+ twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
+ REG_INT_MSK_STS_C);
+ twl6030_usb_irq(twl->irq2, twl);
+ twl6030_usbotg_irq(twl->irq1, twl);
+
+ return 0;
+}
+
+static void otg_set_vbus_work(struct work_struct *data)
+{
+ struct twl6030_usb *twl = container_of(data, struct twl6030_usb,
+ set_vbus_work);
+
+ /*
+ * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1
+ * register. This enables boost mode.
+ */
+
+ if (twl->vbus_enable)
+ twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x40,
+ CHARGERUSB_CTRL1);
+ else
+ twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x00,
+ CHARGERUSB_CTRL1);
+}
+
+static int twl6030_set_vbus(struct phy_companion *comparator, bool enabled)
+{
+ struct twl6030_usb *twl = comparator_to_twl(comparator);
+
+ twl->vbus_enable = enabled;
+ schedule_work(&twl->set_vbus_work);
+
+ return 0;
+}
+
+static int twl6030_usb_probe(struct platform_device *pdev)
+{
+ u32 ret;
+ struct twl6030_usb *twl;
+ int status, err;
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct twl4030_usb_data *pdata = dev_get_platdata(dev);
+
+ twl = devm_kzalloc(dev, sizeof(*twl), GFP_KERNEL);
+ if (!twl)
+ return -ENOMEM;
+
+ twl->dev = &pdev->dev;
+ twl->irq1 = platform_get_irq(pdev, 0);
+ twl->irq2 = platform_get_irq(pdev, 1);
+ twl->linkstat = OMAP_MUSB_UNKNOWN;
+
+ twl->comparator.set_vbus = twl6030_set_vbus;
+ twl->comparator.start_srp = twl6030_start_srp;
+
+ ret = omap_usb2_set_comparator(&twl->comparator);
+ if (ret == -ENODEV) {
+ dev_info(&pdev->dev, "phy not ready, deferring probe");
+ return -EPROBE_DEFER;
+ }
+
+ if (np) {
+ twl->regulator = "usb";
+ } else if (pdata) {
+ if (pdata->features & TWL6032_SUBCLASS)
+ twl->regulator = "ldousb";
+ else
+ twl->regulator = "vusb";
+ } else {
+ dev_err(&pdev->dev, "twl6030 initialized without pdata\n");
+ return -EINVAL;
+ }
+
+ /* init spinlock for workqueue */
+ spin_lock_init(&twl->lock);
+
+ err = twl6030_usb_ldo_init(twl);
+ if (err) {
+ dev_err(&pdev->dev, "ldo init failed\n");
+ return err;
+ }
+
+ platform_set_drvdata(pdev, twl);
+ if (device_create_file(&pdev->dev, &dev_attr_vbus))
+ dev_warn(&pdev->dev, "could not create sysfs file\n");
+
+ INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work);
+
+ status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "twl6030_usb", twl);
+ if (status < 0) {
+ dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
+ twl->irq1, status);
+ device_remove_file(twl->dev, &dev_attr_vbus);
+ return status;
+ }
+
+ status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "twl6030_usb", twl);
+ if (status < 0) {
+ dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
+ twl->irq2, status);
+ free_irq(twl->irq1, twl);
+ device_remove_file(twl->dev, &dev_attr_vbus);
+ return status;
+ }
+
+ twl->asleep = 0;
+ twl6030_enable_irq(twl);
+ dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
+
+ return 0;
+}
+
+static int twl6030_usb_remove(struct platform_device *pdev)
+{
+ struct twl6030_usb *twl = platform_get_drvdata(pdev);
+
+ twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
+ REG_INT_MSK_LINE_C);
+ twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
+ REG_INT_MSK_STS_C);
+ free_irq(twl->irq1, twl);
+ free_irq(twl->irq2, twl);
+ regulator_put(twl->usb3v3);
+ device_remove_file(twl->dev, &dev_attr_vbus);
+ cancel_work_sync(&twl->set_vbus_work);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id twl6030_usb_id_table[] = {
+ { .compatible = "ti,twl6030-usb" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, twl6030_usb_id_table);
+#endif
+
+static struct platform_driver twl6030_usb_driver = {
+ .probe = twl6030_usb_probe,
+ .remove = twl6030_usb_remove,
+ .driver = {
+ .name = "twl6030_usb",
+ .of_match_table = of_match_ptr(twl6030_usb_id_table),
+ },
+};
+
+static int __init twl6030_usb_init(void)
+{
+ return platform_driver_register(&twl6030_usb_driver);
+}
+subsys_initcall(twl6030_usb_init);
+
+static void __exit twl6030_usb_exit(void)
+{
+ platform_driver_unregister(&twl6030_usb_driver);
+}
+module_exit(twl6030_usb_exit);
+
+MODULE_ALIAS("platform:twl6030_usb");
+MODULE_AUTHOR("Hema HK <hemahk@ti.com>");
+MODULE_DESCRIPTION("TWL6030 USB transceiver driver");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/usb/phy/phy-ulpi-viewport.c b/kernel/drivers/usb/phy/phy-ulpi-viewport.c
new file mode 100644
index 000000000..18bb8264b
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-ulpi-viewport.c
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/io.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
+#define ULPI_VIEW_WAKEUP (1 << 31)
+#define ULPI_VIEW_RUN (1 << 30)
+#define ULPI_VIEW_WRITE (1 << 29)
+#define ULPI_VIEW_READ (0 << 29)
+#define ULPI_VIEW_ADDR(x) (((x) & 0xff) << 16)
+#define ULPI_VIEW_DATA_READ(x) (((x) >> 8) & 0xff)
+#define ULPI_VIEW_DATA_WRITE(x) ((x) & 0xff)
+
+static int ulpi_viewport_wait(void __iomem *view, u32 mask)
+{
+ unsigned long usec = 2000;
+
+ while (usec--) {
+ if (!(readl(view) & mask))
+ return 0;
+
+ udelay(1);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int ulpi_viewport_read(struct usb_phy *otg, u32 reg)
+{
+ int ret;
+ void __iomem *view = otg->io_priv;
+
+ writel(ULPI_VIEW_WAKEUP | ULPI_VIEW_WRITE, view);
+ ret = ulpi_viewport_wait(view, ULPI_VIEW_WAKEUP);
+ if (ret)
+ return ret;
+
+ writel(ULPI_VIEW_RUN | ULPI_VIEW_READ | ULPI_VIEW_ADDR(reg), view);
+ ret = ulpi_viewport_wait(view, ULPI_VIEW_RUN);
+ if (ret)
+ return ret;
+
+ return ULPI_VIEW_DATA_READ(readl(view));
+}
+
+static int ulpi_viewport_write(struct usb_phy *otg, u32 val, u32 reg)
+{
+ int ret;
+ void __iomem *view = otg->io_priv;
+
+ writel(ULPI_VIEW_WAKEUP | ULPI_VIEW_WRITE, view);
+ ret = ulpi_viewport_wait(view, ULPI_VIEW_WAKEUP);
+ if (ret)
+ return ret;
+
+ writel(ULPI_VIEW_RUN | ULPI_VIEW_WRITE | ULPI_VIEW_DATA_WRITE(val) |
+ ULPI_VIEW_ADDR(reg), view);
+
+ return ulpi_viewport_wait(view, ULPI_VIEW_RUN);
+}
+
+struct usb_phy_io_ops ulpi_viewport_access_ops = {
+ .read = ulpi_viewport_read,
+ .write = ulpi_viewport_write,
+};
+EXPORT_SYMBOL_GPL(ulpi_viewport_access_ops);
diff --git a/kernel/drivers/usb/phy/phy-ulpi.c b/kernel/drivers/usb/phy/phy-ulpi.c
new file mode 100644
index 000000000..f48a7a21e
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy-ulpi.c
@@ -0,0 +1,286 @@
+/*
+ * Generic ULPI USB transceiver support
+ *
+ * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * Based on sources from
+ *
+ * Sascha Hauer <s.hauer@pengutronix.de>
+ * Freescale Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/export.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
+
+struct ulpi_info {
+ unsigned int id;
+ char *name;
+};
+
+#define ULPI_ID(vendor, product) (((vendor) << 16) | (product))
+#define ULPI_INFO(_id, _name) \
+ { \
+ .id = (_id), \
+ .name = (_name), \
+ }
+
+/* ULPI hardcoded IDs, used for probing */
+static struct ulpi_info ulpi_ids[] = {
+ ULPI_INFO(ULPI_ID(0x04cc, 0x1504), "NXP ISP1504"),
+ ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB331x"),
+ ULPI_INFO(ULPI_ID(0x0424, 0x0007), "SMSC USB3320"),
+ ULPI_INFO(ULPI_ID(0x0424, 0x0009), "SMSC USB334x"),
+ ULPI_INFO(ULPI_ID(0x0451, 0x1507), "TI TUSB1210"),
+};
+
+static int ulpi_set_otg_flags(struct usb_phy *phy)
+{
+ unsigned int flags = ULPI_OTG_CTRL_DP_PULLDOWN |
+ ULPI_OTG_CTRL_DM_PULLDOWN;
+
+ if (phy->flags & ULPI_OTG_ID_PULLUP)
+ flags |= ULPI_OTG_CTRL_ID_PULLUP;
+
+ /*
+ * ULPI Specification rev.1.1 default
+ * for Dp/DmPulldown is enabled.
+ */
+ if (phy->flags & ULPI_OTG_DP_PULLDOWN_DIS)
+ flags &= ~ULPI_OTG_CTRL_DP_PULLDOWN;
+
+ if (phy->flags & ULPI_OTG_DM_PULLDOWN_DIS)
+ flags &= ~ULPI_OTG_CTRL_DM_PULLDOWN;
+
+ if (phy->flags & ULPI_OTG_EXTVBUSIND)
+ flags |= ULPI_OTG_CTRL_EXTVBUSIND;
+
+ return usb_phy_io_write(phy, flags, ULPI_OTG_CTRL);
+}
+
+static int ulpi_set_fc_flags(struct usb_phy *phy)
+{
+ unsigned int flags = 0;
+
+ /*
+ * ULPI Specification rev.1.1 default
+ * for XcvrSelect is Full Speed.
+ */
+ if (phy->flags & ULPI_FC_HS)
+ flags |= ULPI_FUNC_CTRL_HIGH_SPEED;
+ else if (phy->flags & ULPI_FC_LS)
+ flags |= ULPI_FUNC_CTRL_LOW_SPEED;
+ else if (phy->flags & ULPI_FC_FS4LS)
+ flags |= ULPI_FUNC_CTRL_FS4LS;
+ else
+ flags |= ULPI_FUNC_CTRL_FULL_SPEED;
+
+ if (phy->flags & ULPI_FC_TERMSEL)
+ flags |= ULPI_FUNC_CTRL_TERMSELECT;
+
+ /*
+ * ULPI Specification rev.1.1 default
+ * for OpMode is Normal Operation.
+ */
+ if (phy->flags & ULPI_FC_OP_NODRV)
+ flags |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
+ else if (phy->flags & ULPI_FC_OP_DIS_NRZI)
+ flags |= ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI;
+ else if (phy->flags & ULPI_FC_OP_NSYNC_NEOP)
+ flags |= ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP;
+ else
+ flags |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
+
+ /*
+ * ULPI Specification rev.1.1 default
+ * for SuspendM is Powered.
+ */
+ flags |= ULPI_FUNC_CTRL_SUSPENDM;
+
+ return usb_phy_io_write(phy, flags, ULPI_FUNC_CTRL);
+}
+
+static int ulpi_set_ic_flags(struct usb_phy *phy)
+{
+ unsigned int flags = 0;
+
+ if (phy->flags & ULPI_IC_AUTORESUME)
+ flags |= ULPI_IFC_CTRL_AUTORESUME;
+
+ if (phy->flags & ULPI_IC_EXTVBUS_INDINV)
+ flags |= ULPI_IFC_CTRL_EXTERNAL_VBUS;
+
+ if (phy->flags & ULPI_IC_IND_PASSTHRU)
+ flags |= ULPI_IFC_CTRL_PASSTHRU;
+
+ if (phy->flags & ULPI_IC_PROTECT_DIS)
+ flags |= ULPI_IFC_CTRL_PROTECT_IFC_DISABLE;
+
+ return usb_phy_io_write(phy, flags, ULPI_IFC_CTRL);
+}
+
+static int ulpi_set_flags(struct usb_phy *phy)
+{
+ int ret;
+
+ ret = ulpi_set_otg_flags(phy);
+ if (ret)
+ return ret;
+
+ ret = ulpi_set_ic_flags(phy);
+ if (ret)
+ return ret;
+
+ return ulpi_set_fc_flags(phy);
+}
+
+static int ulpi_check_integrity(struct usb_phy *phy)
+{
+ int ret, i;
+ unsigned int val = 0x55;
+
+ for (i = 0; i < 2; i++) {
+ ret = usb_phy_io_write(phy, val, ULPI_SCRATCH);
+ if (ret < 0)
+ return ret;
+
+ ret = usb_phy_io_read(phy, ULPI_SCRATCH);
+ if (ret < 0)
+ return ret;
+
+ if (ret != val) {
+ pr_err("ULPI integrity check: failed!");
+ return -ENODEV;
+ }
+ val = val << 1;
+ }
+
+ pr_info("ULPI integrity check: passed.\n");
+
+ return 0;
+}
+
+static int ulpi_init(struct usb_phy *phy)
+{
+ int i, vid, pid, ret;
+ u32 ulpi_id = 0;
+
+ for (i = 0; i < 4; i++) {
+ ret = usb_phy_io_read(phy, ULPI_PRODUCT_ID_HIGH - i);
+ if (ret < 0)
+ return ret;
+ ulpi_id = (ulpi_id << 8) | ret;
+ }
+ vid = ulpi_id & 0xffff;
+ pid = ulpi_id >> 16;
+
+ pr_info("ULPI transceiver vendor/product ID 0x%04x/0x%04x\n", vid, pid);
+
+ for (i = 0; i < ARRAY_SIZE(ulpi_ids); i++) {
+ if (ulpi_ids[i].id == ULPI_ID(vid, pid)) {
+ pr_info("Found %s ULPI transceiver.\n",
+ ulpi_ids[i].name);
+ break;
+ }
+ }
+
+ ret = ulpi_check_integrity(phy);
+ if (ret)
+ return ret;
+
+ return ulpi_set_flags(phy);
+}
+
+static int ulpi_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ struct usb_phy *phy = otg->usb_phy;
+ unsigned int flags = usb_phy_io_read(phy, ULPI_IFC_CTRL);
+
+ if (!host) {
+ otg->host = NULL;
+ return 0;
+ }
+
+ otg->host = host;
+
+ flags &= ~(ULPI_IFC_CTRL_6_PIN_SERIAL_MODE |
+ ULPI_IFC_CTRL_3_PIN_SERIAL_MODE |
+ ULPI_IFC_CTRL_CARKITMODE);
+
+ if (phy->flags & ULPI_IC_6PIN_SERIAL)
+ flags |= ULPI_IFC_CTRL_6_PIN_SERIAL_MODE;
+ else if (phy->flags & ULPI_IC_3PIN_SERIAL)
+ flags |= ULPI_IFC_CTRL_3_PIN_SERIAL_MODE;
+ else if (phy->flags & ULPI_IC_CARKIT)
+ flags |= ULPI_IFC_CTRL_CARKITMODE;
+
+ return usb_phy_io_write(phy, flags, ULPI_IFC_CTRL);
+}
+
+static int ulpi_set_vbus(struct usb_otg *otg, bool on)
+{
+ struct usb_phy *phy = otg->usb_phy;
+ unsigned int flags = usb_phy_io_read(phy, ULPI_OTG_CTRL);
+
+ flags &= ~(ULPI_OTG_CTRL_DRVVBUS | ULPI_OTG_CTRL_DRVVBUS_EXT);
+
+ if (on) {
+ if (phy->flags & ULPI_OTG_DRVVBUS)
+ flags |= ULPI_OTG_CTRL_DRVVBUS;
+
+ if (phy->flags & ULPI_OTG_DRVVBUS_EXT)
+ flags |= ULPI_OTG_CTRL_DRVVBUS_EXT;
+ }
+
+ return usb_phy_io_write(phy, flags, ULPI_OTG_CTRL);
+}
+
+struct usb_phy *
+otg_ulpi_create(struct usb_phy_io_ops *ops,
+ unsigned int flags)
+{
+ struct usb_phy *phy;
+ struct usb_otg *otg;
+
+ phy = kzalloc(sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return NULL;
+
+ otg = kzalloc(sizeof(*otg), GFP_KERNEL);
+ if (!otg) {
+ kfree(phy);
+ return NULL;
+ }
+
+ phy->label = "ULPI";
+ phy->flags = flags;
+ phy->io_ops = ops;
+ phy->otg = otg;
+ phy->init = ulpi_init;
+
+ otg->usb_phy = phy;
+ otg->set_host = ulpi_set_host;
+ otg->set_vbus = ulpi_set_vbus;
+
+ return phy;
+}
+EXPORT_SYMBOL_GPL(otg_ulpi_create);
+
diff --git a/kernel/drivers/usb/phy/phy.c b/kernel/drivers/usb/phy/phy.c
new file mode 100644
index 000000000..d1cd6b50f
--- /dev/null
+++ b/kernel/drivers/usb/phy/phy.c
@@ -0,0 +1,468 @@
+/*
+ * phy.c -- USB phy handling
+ *
+ * Copyright (C) 2004-2013 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include <linux/usb/phy.h>
+
+static LIST_HEAD(phy_list);
+static LIST_HEAD(phy_bind_list);
+static DEFINE_SPINLOCK(phy_lock);
+
+static struct usb_phy *__usb_find_phy(struct list_head *list,
+ enum usb_phy_type type)
+{
+ struct usb_phy *phy = NULL;
+
+ list_for_each_entry(phy, list, head) {
+ if (phy->type != type)
+ continue;
+
+ return phy;
+ }
+
+ return ERR_PTR(-ENODEV);
+}
+
+static struct usb_phy *__usb_find_phy_dev(struct device *dev,
+ struct list_head *list, u8 index)
+{
+ struct usb_phy_bind *phy_bind = NULL;
+
+ list_for_each_entry(phy_bind, list, list) {
+ if (!(strcmp(phy_bind->dev_name, dev_name(dev))) &&
+ phy_bind->index == index) {
+ if (phy_bind->phy)
+ return phy_bind->phy;
+ else
+ return ERR_PTR(-EPROBE_DEFER);
+ }
+ }
+
+ return ERR_PTR(-ENODEV);
+}
+
+static struct usb_phy *__of_usb_find_phy(struct device_node *node)
+{
+ struct usb_phy *phy;
+
+ if (!of_device_is_available(node))
+ return ERR_PTR(-ENODEV);
+
+ list_for_each_entry(phy, &phy_list, head) {
+ if (node != phy->dev->of_node)
+ continue;
+
+ return phy;
+ }
+
+ return ERR_PTR(-EPROBE_DEFER);
+}
+
+static void devm_usb_phy_release(struct device *dev, void *res)
+{
+ struct usb_phy *phy = *(struct usb_phy **)res;
+
+ usb_put_phy(phy);
+}
+
+static int devm_usb_phy_match(struct device *dev, void *res, void *match_data)
+{
+ struct usb_phy **phy = res;
+
+ return *phy == match_data;
+}
+
+/**
+ * devm_usb_get_phy - find the USB PHY
+ * @dev - device that requests this phy
+ * @type - the type of the phy the controller requires
+ *
+ * Gets the phy using usb_get_phy(), and associates a device with it using
+ * devres. On driver detach, release function is invoked on the devres data,
+ * then, devres data is freed.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type)
+{
+ struct usb_phy **ptr, *phy;
+
+ ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
+ if (!ptr)
+ return ERR_PTR(-ENOMEM);
+
+ phy = usb_get_phy(type);
+ if (!IS_ERR(phy)) {
+ *ptr = phy;
+ devres_add(dev, ptr);
+ } else
+ devres_free(ptr);
+
+ return phy;
+}
+EXPORT_SYMBOL_GPL(devm_usb_get_phy);
+
+/**
+ * usb_get_phy - find the USB PHY
+ * @type - the type of the phy the controller requires
+ *
+ * Returns the phy driver, after getting a refcount to it; or
+ * -ENODEV if there is no such phy. The caller is responsible for
+ * calling usb_put_phy() to release that count.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *usb_get_phy(enum usb_phy_type type)
+{
+ struct usb_phy *phy = NULL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&phy_lock, flags);
+
+ phy = __usb_find_phy(&phy_list, type);
+ if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
+ pr_debug("PHY: unable to find transceiver of type %s\n",
+ usb_phy_type_string(type));
+ if (!IS_ERR(phy))
+ phy = ERR_PTR(-ENODEV);
+
+ goto err0;
+ }
+
+ get_device(phy->dev);
+
+err0:
+ spin_unlock_irqrestore(&phy_lock, flags);
+
+ return phy;
+}
+EXPORT_SYMBOL_GPL(usb_get_phy);
+
+/**
+ * devm_usb_get_phy_by_phandle - find the USB PHY by phandle
+ * @dev - device that requests this phy
+ * @phandle - name of the property holding the phy phandle value
+ * @index - the index of the phy
+ *
+ * Returns the phy driver associated with the given phandle value,
+ * after getting a refcount to it, -ENODEV if there is no such phy or
+ * -EPROBE_DEFER if there is a phandle to the phy, but the device is
+ * not yet loaded. While at that, it also associates the device with
+ * the phy using devres. On driver detach, release function is invoked
+ * on the devres data, then, devres data is freed.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev,
+ const char *phandle, u8 index)
+{
+ struct usb_phy *phy = ERR_PTR(-ENOMEM), **ptr;
+ unsigned long flags;
+ struct device_node *node;
+
+ if (!dev->of_node) {
+ dev_dbg(dev, "device does not have a device node entry\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ node = of_parse_phandle(dev->of_node, phandle, index);
+ if (!node) {
+ dev_dbg(dev, "failed to get %s phandle in %s node\n", phandle,
+ dev->of_node->full_name);
+ return ERR_PTR(-ENODEV);
+ }
+
+ ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
+ if (!ptr) {
+ dev_dbg(dev, "failed to allocate memory for devres\n");
+ goto err0;
+ }
+
+ spin_lock_irqsave(&phy_lock, flags);
+
+ phy = __of_usb_find_phy(node);
+ if (IS_ERR(phy)) {
+ devres_free(ptr);
+ goto err1;
+ }
+
+ if (!try_module_get(phy->dev->driver->owner)) {
+ phy = ERR_PTR(-ENODEV);
+ devres_free(ptr);
+ goto err1;
+ }
+
+ *ptr = phy;
+ devres_add(dev, ptr);
+
+ get_device(phy->dev);
+
+err1:
+ spin_unlock_irqrestore(&phy_lock, flags);
+
+err0:
+ of_node_put(node);
+
+ return phy;
+}
+EXPORT_SYMBOL_GPL(devm_usb_get_phy_by_phandle);
+
+/**
+ * usb_get_phy_dev - find the USB PHY
+ * @dev - device that requests this phy
+ * @index - the index of the phy
+ *
+ * Returns the phy driver, after getting a refcount to it; or
+ * -ENODEV if there is no such phy. The caller is responsible for
+ * calling usb_put_phy() to release that count.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index)
+{
+ struct usb_phy *phy = NULL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&phy_lock, flags);
+
+ phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
+ if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
+ dev_dbg(dev, "unable to find transceiver\n");
+ if (!IS_ERR(phy))
+ phy = ERR_PTR(-ENODEV);
+
+ goto err0;
+ }
+
+ get_device(phy->dev);
+
+err0:
+ spin_unlock_irqrestore(&phy_lock, flags);
+
+ return phy;
+}
+EXPORT_SYMBOL_GPL(usb_get_phy_dev);
+
+/**
+ * devm_usb_get_phy_dev - find the USB PHY using device ptr and index
+ * @dev - device that requests this phy
+ * @index - the index of the phy
+ *
+ * Gets the phy using usb_get_phy_dev(), and associates a device with it using
+ * devres. On driver detach, release function is invoked on the devres data,
+ * then, devres data is freed.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index)
+{
+ struct usb_phy **ptr, *phy;
+
+ ptr = devres_alloc(devm_usb_phy_release, sizeof(*ptr), GFP_KERNEL);
+ if (!ptr)
+ return NULL;
+
+ phy = usb_get_phy_dev(dev, index);
+ if (!IS_ERR(phy)) {
+ *ptr = phy;
+ devres_add(dev, ptr);
+ } else
+ devres_free(ptr);
+
+ return phy;
+}
+EXPORT_SYMBOL_GPL(devm_usb_get_phy_dev);
+
+/**
+ * devm_usb_put_phy - release the USB PHY
+ * @dev - device that wants to release this phy
+ * @phy - the phy returned by devm_usb_get_phy()
+ *
+ * destroys the devres associated with this phy and invokes usb_put_phy
+ * to release the phy.
+ *
+ * For use by USB host and peripheral drivers.
+ */
+void devm_usb_put_phy(struct device *dev, struct usb_phy *phy)
+{
+ int r;
+
+ r = devres_destroy(dev, devm_usb_phy_release, devm_usb_phy_match, phy);
+ dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n");
+}
+EXPORT_SYMBOL_GPL(devm_usb_put_phy);
+
+/**
+ * usb_put_phy - release the USB PHY
+ * @x: the phy returned by usb_get_phy()
+ *
+ * Releases a refcount the caller received from usb_get_phy().
+ *
+ * For use by USB host and peripheral drivers.
+ */
+void usb_put_phy(struct usb_phy *x)
+{
+ if (x) {
+ struct module *owner = x->dev->driver->owner;
+
+ put_device(x->dev);
+ module_put(owner);
+ }
+}
+EXPORT_SYMBOL_GPL(usb_put_phy);
+
+/**
+ * usb_add_phy - declare the USB PHY
+ * @x: the USB phy to be used; or NULL
+ * @type - the type of this PHY
+ *
+ * This call is exclusively for use by phy drivers, which
+ * coordinate the activities of drivers for host and peripheral
+ * controllers, and in some cases for VBUS current regulation.
+ */
+int usb_add_phy(struct usb_phy *x, enum usb_phy_type type)
+{
+ int ret = 0;
+ unsigned long flags;
+ struct usb_phy *phy;
+
+ if (x->type != USB_PHY_TYPE_UNDEFINED) {
+ dev_err(x->dev, "not accepting initialized PHY %s\n", x->label);
+ return -EINVAL;
+ }
+
+ ATOMIC_INIT_NOTIFIER_HEAD(&x->notifier);
+
+ spin_lock_irqsave(&phy_lock, flags);
+
+ list_for_each_entry(phy, &phy_list, head) {
+ if (phy->type == type) {
+ ret = -EBUSY;
+ dev_err(x->dev, "transceiver type %s already exists\n",
+ usb_phy_type_string(type));
+ goto out;
+ }
+ }
+
+ x->type = type;
+ list_add_tail(&x->head, &phy_list);
+
+out:
+ spin_unlock_irqrestore(&phy_lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(usb_add_phy);
+
+/**
+ * usb_add_phy_dev - declare the USB PHY
+ * @x: the USB phy to be used; or NULL
+ *
+ * This call is exclusively for use by phy drivers, which
+ * coordinate the activities of drivers for host and peripheral
+ * controllers, and in some cases for VBUS current regulation.
+ */
+int usb_add_phy_dev(struct usb_phy *x)
+{
+ struct usb_phy_bind *phy_bind;
+ unsigned long flags;
+
+ if (!x->dev) {
+ dev_err(x->dev, "no device provided for PHY\n");
+ return -EINVAL;
+ }
+
+ ATOMIC_INIT_NOTIFIER_HEAD(&x->notifier);
+
+ spin_lock_irqsave(&phy_lock, flags);
+ list_for_each_entry(phy_bind, &phy_bind_list, list)
+ if (!(strcmp(phy_bind->phy_dev_name, dev_name(x->dev))))
+ phy_bind->phy = x;
+
+ list_add_tail(&x->head, &phy_list);
+
+ spin_unlock_irqrestore(&phy_lock, flags);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_add_phy_dev);
+
+/**
+ * usb_remove_phy - remove the OTG PHY
+ * @x: the USB OTG PHY to be removed;
+ *
+ * This reverts the effects of usb_add_phy
+ */
+void usb_remove_phy(struct usb_phy *x)
+{
+ unsigned long flags;
+ struct usb_phy_bind *phy_bind;
+
+ spin_lock_irqsave(&phy_lock, flags);
+ if (x) {
+ list_for_each_entry(phy_bind, &phy_bind_list, list)
+ if (phy_bind->phy == x)
+ phy_bind->phy = NULL;
+ list_del(&x->head);
+ }
+ spin_unlock_irqrestore(&phy_lock, flags);
+}
+EXPORT_SYMBOL_GPL(usb_remove_phy);
+
+/**
+ * usb_bind_phy - bind the phy and the controller that uses the phy
+ * @dev_name: the device name of the device that will bind to the phy
+ * @index: index to specify the port number
+ * @phy_dev_name: the device name of the phy
+ *
+ * Fills the phy_bind structure with the dev_name and phy_dev_name. This will
+ * be used when the phy driver registers the phy and when the controller
+ * requests this phy.
+ *
+ * To be used by platform specific initialization code.
+ */
+int usb_bind_phy(const char *dev_name, u8 index,
+ const char *phy_dev_name)
+{
+ struct usb_phy_bind *phy_bind;
+ unsigned long flags;
+
+ phy_bind = kzalloc(sizeof(*phy_bind), GFP_KERNEL);
+ if (!phy_bind)
+ return -ENOMEM;
+
+ phy_bind->dev_name = dev_name;
+ phy_bind->phy_dev_name = phy_dev_name;
+ phy_bind->index = index;
+
+ spin_lock_irqsave(&phy_lock, flags);
+ list_add_tail(&phy_bind->list, &phy_bind_list);
+ spin_unlock_irqrestore(&phy_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_bind_phy);
+
+/**
+ * usb_phy_set_event - set event to phy event
+ * @x: the phy returned by usb_get_phy();
+ *
+ * This sets event to phy event
+ */
+void usb_phy_set_event(struct usb_phy *x, unsigned long event)
+{
+ x->last_event = event;
+}
+EXPORT_SYMBOL_GPL(usb_phy_set_event);