summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/usb/host/ohci-da8xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/usb/host/ohci-da8xx.c')
-rw-r--r--kernel/drivers/usb/host/ohci-da8xx.c438
1 files changed, 438 insertions, 0 deletions
diff --git a/kernel/drivers/usb/host/ohci-da8xx.c b/kernel/drivers/usb/host/ohci-da8xx.c
new file mode 100644
index 000000000..e5c33bc98
--- /dev/null
+++ b/kernel/drivers/usb/host/ohci-da8xx.c
@@ -0,0 +1,438 @@
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * TI DA8xx (OMAP-L1x) Bus Glue
+ *
+ * Derived from: ohci-omap.c and ohci-s3c2410.c
+ * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <mach/da8xx.h>
+#include <linux/platform_data/usb-davinci.h>
+
+#ifndef CONFIG_ARCH_DAVINCI_DA8XX
+#error "This file is DA8xx bus glue. Define CONFIG_ARCH_DAVINCI_DA8XX."
+#endif
+
+#define CFGCHIP2 DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)
+
+static struct clk *usb11_clk;
+static struct clk *usb20_clk;
+
+/* Over-current indicator change bitmask */
+static volatile u16 ocic_mask;
+
+static void ohci_da8xx_clock(int on)
+{
+ u32 cfgchip2;
+
+ cfgchip2 = __raw_readl(CFGCHIP2);
+ if (on) {
+ clk_enable(usb11_clk);
+
+ /*
+ * If USB 1.1 reference clock is sourced from USB 2.0 PHY, we
+ * need to enable the USB 2.0 module clocking, start its PHY,
+ * and not allow it to stop the clock during USB 2.0 suspend.
+ */
+ if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX)) {
+ clk_enable(usb20_clk);
+
+ cfgchip2 &= ~(CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN);
+ cfgchip2 |= CFGCHIP2_PHY_PLLON;
+ __raw_writel(cfgchip2, CFGCHIP2);
+
+ pr_info("Waiting for USB PHY clock good...\n");
+ while (!(__raw_readl(CFGCHIP2) & CFGCHIP2_PHYCLKGD))
+ cpu_relax();
+ }
+
+ /* Enable USB 1.1 PHY */
+ cfgchip2 |= CFGCHIP2_USB1SUSPENDM;
+ } else {
+ clk_disable(usb11_clk);
+ if (!(cfgchip2 & CFGCHIP2_USB1PHYCLKMUX))
+ clk_disable(usb20_clk);
+
+ /* Disable USB 1.1 PHY */
+ cfgchip2 &= ~CFGCHIP2_USB1SUSPENDM;
+ }
+ __raw_writel(cfgchip2, CFGCHIP2);
+}
+
+/*
+ * Handle the port over-current indicator change.
+ */
+static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub,
+ unsigned port)
+{
+ ocic_mask |= 1 << port;
+
+ /* Once over-current is detected, the port needs to be powered down */
+ if (hub->get_oci(port) > 0)
+ hub->set_power(port, 0);
+}
+
+static int ohci_da8xx_init(struct usb_hcd *hcd)
+{
+ struct device *dev = hcd->self.controller;
+ struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int result;
+ u32 rh_a;
+
+ dev_dbg(dev, "starting USB controller\n");
+
+ ohci_da8xx_clock(1);
+
+ /*
+ * DA8xx only have 1 port connected to the pins but the HC root hub
+ * register A reports 2 ports, thus we'll have to override it...
+ */
+ ohci->num_ports = 1;
+
+ result = ohci_init(ohci);
+ if (result < 0)
+ return result;
+
+ /*
+ * Since we're providing a board-specific root hub port power control
+ * and over-current reporting, we have to override the HC root hub A
+ * register's default value, so that ohci_hub_control() could return
+ * the correct hub descriptor...
+ */
+ rh_a = ohci_readl(ohci, &ohci->regs->roothub.a);
+ if (hub->set_power) {
+ rh_a &= ~RH_A_NPS;
+ rh_a |= RH_A_PSM;
+ }
+ if (hub->get_oci) {
+ rh_a &= ~RH_A_NOCP;
+ rh_a |= RH_A_OCPM;
+ }
+ rh_a &= ~RH_A_POTPGT;
+ rh_a |= hub->potpgt << 24;
+ ohci_writel(ohci, rh_a, &ohci->regs->roothub.a);
+
+ return result;
+}
+
+static void ohci_da8xx_stop(struct usb_hcd *hcd)
+{
+ ohci_stop(hcd);
+ ohci_da8xx_clock(0);
+}
+
+static int ohci_da8xx_start(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int result;
+
+ result = ohci_run(ohci);
+ if (result < 0)
+ ohci_da8xx_stop(hcd);
+
+ return result;
+}
+
+/*
+ * Update the status data from the hub with the over-current indicator change.
+ */
+static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ int length = ohci_hub_status_data(hcd, buf);
+
+ /* See if we have OCIC bit set on port 1 */
+ if (ocic_mask & (1 << 1)) {
+ dev_dbg(hcd->self.controller, "over-current indicator change "
+ "on port 1\n");
+
+ if (!length)
+ length = 1;
+
+ buf[0] |= 1 << 1;
+ }
+ return length;
+}
+
+/*
+ * Look at the control requests to the root hub and see if we need to override.
+ */
+static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ u16 wIndex, char *buf, u16 wLength)
+{
+ struct device *dev = hcd->self.controller;
+ struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
+ int temp;
+
+ switch (typeReq) {
+ case GetPortStatus:
+ /* Check the port number */
+ if (wIndex != 1)
+ break;
+
+ dev_dbg(dev, "GetPortStatus(%u)\n", wIndex);
+
+ temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1);
+
+ /* The port power status (PPS) bit defaults to 1 */
+ if (hub->get_power && hub->get_power(wIndex) == 0)
+ temp &= ~RH_PS_PPS;
+
+ /* The port over-current indicator (POCI) bit is always 0 */
+ if (hub->get_oci && hub->get_oci(wIndex) > 0)
+ temp |= RH_PS_POCI;
+
+ /* The over-current indicator change (OCIC) bit is 0 too */
+ if (ocic_mask & (1 << wIndex))
+ temp |= RH_PS_OCIC;
+
+ put_unaligned(cpu_to_le32(temp), (__le32 *)buf);
+ return 0;
+ case SetPortFeature:
+ temp = 1;
+ goto check_port;
+ case ClearPortFeature:
+ temp = 0;
+
+check_port:
+ /* Check the port number */
+ if (wIndex != 1)
+ break;
+
+ switch (wValue) {
+ case USB_PORT_FEAT_POWER:
+ dev_dbg(dev, "%sPortFeature(%u): %s\n",
+ temp ? "Set" : "Clear", wIndex, "POWER");
+
+ if (!hub->set_power)
+ return -EPIPE;
+
+ return hub->set_power(wIndex, temp) ? -EPIPE : 0;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ dev_dbg(dev, "%sPortFeature(%u): %s\n",
+ temp ? "Set" : "Clear", wIndex,
+ "C_OVER_CURRENT");
+
+ if (temp)
+ ocic_mask |= 1 << wIndex;
+ else
+ ocic_mask &= ~(1 << wIndex);
+ return 0;
+ }
+ }
+
+ return ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+}
+
+static const struct hc_driver ohci_da8xx_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "DA8xx OHCI",
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ohci_irq,
+ .flags = HCD_USB11 | HCD_MEMORY,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = ohci_da8xx_init,
+ .start = ohci_da8xx_start,
+ .stop = ohci_da8xx_stop,
+ .shutdown = ohci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ohci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ohci_da8xx_hub_status_data,
+ .hub_control = ohci_da8xx_hub_control,
+
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+ .start_port_reset = ohci_start_port_reset,
+};
+
+/*-------------------------------------------------------------------------*/
+
+
+/**
+ * usb_hcd_da8xx_probe - initialize DA8xx-based HCDs
+ * Context: !in_interrupt()
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ */
+static int usb_hcd_da8xx_probe(const struct hc_driver *driver,
+ struct platform_device *pdev)
+{
+ struct da8xx_ohci_root_hub *hub = dev_get_platdata(&pdev->dev);
+ struct usb_hcd *hcd;
+ struct resource *mem;
+ int error, irq;
+
+ if (hub == NULL)
+ return -ENODEV;
+
+ usb11_clk = devm_clk_get(&pdev->dev, "usb11");
+ if (IS_ERR(usb11_clk))
+ return PTR_ERR(usb11_clk);
+
+ usb20_clk = devm_clk_get(&pdev->dev, "usb20");
+ if (IS_ERR(usb20_clk))
+ return PTR_ERR(usb20_clk);
+
+ hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+ if (!hcd)
+ return -ENOMEM;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ hcd->regs = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(hcd->regs)) {
+ error = PTR_ERR(hcd->regs);
+ goto err;
+ }
+ hcd->rsrc_start = mem->start;
+ hcd->rsrc_len = resource_size(mem);
+
+ ohci_hcd_init(hcd_to_ohci(hcd));
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ error = -ENODEV;
+ goto err;
+ }
+ error = usb_add_hcd(hcd, irq, 0);
+ if (error)
+ goto err;
+
+ device_wakeup_enable(hcd->self.controller);
+
+ if (hub->ocic_notify) {
+ error = hub->ocic_notify(ohci_da8xx_ocic_handler);
+ if (!error)
+ return 0;
+ }
+
+ usb_remove_hcd(hcd);
+err:
+ usb_put_hcd(hcd);
+ return error;
+}
+
+/**
+ * usb_hcd_da8xx_remove - shutdown processing for DA8xx-based HCDs
+ * @dev: USB Host Controller being removed
+ * Context: !in_interrupt()
+ *
+ * Reverses the effect of usb_hcd_da8xx_probe(), first invoking
+ * the HCD's stop() method. It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ */
+static inline void
+usb_hcd_da8xx_remove(struct usb_hcd *hcd, struct platform_device *pdev)
+{
+ struct da8xx_ohci_root_hub *hub = dev_get_platdata(&pdev->dev);
+
+ hub->ocic_notify(NULL);
+ usb_remove_hcd(hcd);
+ usb_put_hcd(hcd);
+}
+
+static int ohci_hcd_da8xx_drv_probe(struct platform_device *dev)
+{
+ return usb_hcd_da8xx_probe(&ohci_da8xx_hc_driver, dev);
+}
+
+static int ohci_hcd_da8xx_drv_remove(struct platform_device *dev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(dev);
+
+ usb_hcd_da8xx_remove(hcd, dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ohci_da8xx_suspend(struct platform_device *pdev,
+ pm_message_t message)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ bool do_wakeup = device_may_wakeup(&pdev->dev);
+ int ret;
+
+
+ if (time_before(jiffies, ohci->next_statechange))
+ msleep(5);
+ ohci->next_statechange = jiffies;
+
+ ret = ohci_suspend(hcd, do_wakeup);
+ if (ret)
+ return ret;
+
+ ohci_da8xx_clock(0);
+ hcd->state = HC_STATE_SUSPENDED;
+
+ return ret;
+}
+
+static int ohci_da8xx_resume(struct platform_device *dev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(dev);
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+ if (time_before(jiffies, ohci->next_statechange))
+ msleep(5);
+ ohci->next_statechange = jiffies;
+
+ ohci_da8xx_clock(1);
+ dev->dev.power.power_state = PMSG_ON;
+ usb_hcd_resume_root_hub(hcd);
+ return 0;
+}
+#endif
+
+/*
+ * Driver definition to register with platform structure.
+ */
+static struct platform_driver ohci_hcd_da8xx_driver = {
+ .probe = ohci_hcd_da8xx_drv_probe,
+ .remove = ohci_hcd_da8xx_drv_remove,
+ .shutdown = usb_hcd_platform_shutdown,
+#ifdef CONFIG_PM
+ .suspend = ohci_da8xx_suspend,
+ .resume = ohci_da8xx_resume,
+#endif
+ .driver = {
+ .name = "ohci",
+ },
+};
+
+MODULE_ALIAS("platform:ohci");