summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/usb/host/ohci-at91.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/usb/host/ohci-at91.c')
-rw-r--r--kernel/drivers/usb/host/ohci-at91.c178
1 files changed, 80 insertions, 98 deletions
diff --git a/kernel/drivers/usb/host/ohci-at91.c b/kernel/drivers/usb/host/ohci-at91.c
index 15df00cce..8c6e15bd6 100644
--- a/kernel/drivers/usb/host/ohci-at91.c
+++ b/kernel/drivers/usb/host/ohci-at91.c
@@ -36,6 +36,17 @@
#define hcd_to_ohci_at91_priv(h) \
((struct ohci_at91_priv *)hcd_to_ohci(h)->priv)
+#define AT91_MAX_USBH_PORTS 3
+struct at91_usbh_data {
+ int vbus_pin[AT91_MAX_USBH_PORTS]; /* port power-control pin */
+ int overcurrent_pin[AT91_MAX_USBH_PORTS];
+ u8 ports; /* number of ports on root hub */
+ u8 overcurrent_supported;
+ u8 vbus_pin_active_low[AT91_MAX_USBH_PORTS];
+ u8 overcurrent_status[AT91_MAX_USBH_PORTS];
+ u8 overcurrent_changed[AT91_MAX_USBH_PORTS];
+};
+
struct ohci_at91_priv {
struct clk *iclk;
struct clk *fclk;
@@ -431,7 +442,6 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
return IRQ_HANDLED;
}
-#ifdef CONFIG_OF
static const struct of_device_id at91_ohci_dt_ids[] = {
{ .compatible = "atmel,at91rm9200-ohci" },
{ /* sentinel */ }
@@ -439,16 +449,17 @@ static const struct of_device_id at91_ohci_dt_ids[] = {
MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids);
-static int ohci_at91_of_init(struct platform_device *pdev)
+/*-------------------------------------------------------------------------*/
+
+static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
- int i, gpio, ret;
- enum of_gpio_flags flags;
struct at91_usbh_data *pdata;
- u32 ports;
-
- if (!np)
- return 0;
+ int i;
+ int gpio;
+ int ret;
+ enum of_gpio_flags flags;
+ u32 ports;
/* Right now device-tree probed devices don't get dma_mask set.
* Since shared usb code relies on it, set it here for now.
@@ -462,112 +473,83 @@ static int ohci_at91_of_init(struct platform_device *pdev)
if (!pdata)
return -ENOMEM;
+ pdev->dev.platform_data = pdata;
+
if (!of_property_read_u32(np, "num-ports", &ports))
pdata->ports = ports;
at91_for_each_port(i) {
- gpio = of_get_named_gpio_flags(np, "atmel,vbus-gpio", i, &flags);
+ /*
+ * do not configure PIO if not in relation with
+ * real USB port on board
+ */
+ if (i >= pdata->ports) {
+ pdata->vbus_pin[i] = -EINVAL;
+ pdata->overcurrent_pin[i] = -EINVAL;
+ continue;
+ }
+
+ gpio = of_get_named_gpio_flags(np, "atmel,vbus-gpio", i,
+ &flags);
pdata->vbus_pin[i] = gpio;
if (!gpio_is_valid(gpio))
continue;
pdata->vbus_pin_active_low[i] = flags & OF_GPIO_ACTIVE_LOW;
- }
-
- at91_for_each_port(i)
- pdata->overcurrent_pin[i] =
- of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags);
-
- pdev->dev.platform_data = pdata;
-
- return 0;
-}
-#else
-static int ohci_at91_of_init(struct platform_device *pdev)
-{
- return 0;
-}
-#endif
-
-/*-------------------------------------------------------------------------*/
-static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
-{
- struct at91_usbh_data *pdata;
- int i;
- int gpio;
- int ret;
-
- ret = ohci_at91_of_init(pdev);
- if (ret)
- return ret;
+ ret = gpio_request(gpio, "ohci_vbus");
+ if (ret) {
+ dev_err(&pdev->dev,
+ "can't request vbus gpio %d\n", gpio);
+ continue;
+ }
+ ret = gpio_direction_output(gpio,
+ !pdata->vbus_pin_active_low[i]);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "can't put vbus gpio %d as output %d\n",
+ gpio, !pdata->vbus_pin_active_low[i]);
+ gpio_free(gpio);
+ continue;
+ }
- pdata = dev_get_platdata(&pdev->dev);
+ ohci_at91_usb_set_power(pdata, i, 1);
+ }
- if (pdata) {
- at91_for_each_port(i) {
- /*
- * do not configure PIO if not in relation with
- * real USB port on board
- */
- if (i >= pdata->ports) {
- pdata->vbus_pin[i] = -EINVAL;
- pdata->overcurrent_pin[i] = -EINVAL;
- break;
- }
+ at91_for_each_port(i) {
+ if (i >= pdata->ports)
+ break;
- if (!gpio_is_valid(pdata->vbus_pin[i]))
- continue;
- gpio = pdata->vbus_pin[i];
+ pdata->overcurrent_pin[i] =
+ of_get_named_gpio_flags(np, "atmel,oc-gpio", i, &flags);
- ret = gpio_request(gpio, "ohci_vbus");
- if (ret) {
- dev_err(&pdev->dev,
- "can't request vbus gpio %d\n", gpio);
- continue;
- }
- ret = gpio_direction_output(gpio,
- !pdata->vbus_pin_active_low[i]);
- if (ret) {
- dev_err(&pdev->dev,
- "can't put vbus gpio %d as output %d\n",
- gpio, !pdata->vbus_pin_active_low[i]);
- gpio_free(gpio);
- continue;
- }
+ if (!gpio_is_valid(pdata->overcurrent_pin[i]))
+ continue;
+ gpio = pdata->overcurrent_pin[i];
- ohci_at91_usb_set_power(pdata, i, 1);
+ ret = gpio_request(gpio, "ohci_overcurrent");
+ if (ret) {
+ dev_err(&pdev->dev,
+ "can't request overcurrent gpio %d\n",
+ gpio);
+ continue;
}
- at91_for_each_port(i) {
- if (!gpio_is_valid(pdata->overcurrent_pin[i]))
- continue;
- gpio = pdata->overcurrent_pin[i];
-
- ret = gpio_request(gpio, "ohci_overcurrent");
- if (ret) {
- dev_err(&pdev->dev,
- "can't request overcurrent gpio %d\n",
- gpio);
- continue;
- }
-
- ret = gpio_direction_input(gpio);
- if (ret) {
- dev_err(&pdev->dev,
- "can't configure overcurrent gpio %d as input\n",
- gpio);
- gpio_free(gpio);
- continue;
- }
+ ret = gpio_direction_input(gpio);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "can't configure overcurrent gpio %d as input\n",
+ gpio);
+ gpio_free(gpio);
+ continue;
+ }
- ret = request_irq(gpio_to_irq(gpio),
- ohci_hcd_at91_overcurrent_irq,
- IRQF_SHARED, "ohci_overcurrent", pdev);
- if (ret) {
- gpio_free(gpio);
- dev_err(&pdev->dev,
- "can't get gpio IRQ for overcurrent\n");
- }
+ ret = request_irq(gpio_to_irq(gpio),
+ ohci_hcd_at91_overcurrent_irq,
+ IRQF_SHARED, "ohci_overcurrent", pdev);
+ if (ret) {
+ gpio_free(gpio);
+ dev_err(&pdev->dev,
+ "can't get gpio IRQ for overcurrent\n");
}
}
@@ -673,7 +655,7 @@ static struct platform_driver ohci_hcd_at91_driver = {
.driver = {
.name = "at91_ohci",
.pm = &ohci_hcd_at91_pm_ops,
- .of_match_table = of_match_ptr(at91_ohci_dt_ids),
+ .of_match_table = at91_ohci_dt_ids,
},
};