diff options
Diffstat (limited to 'kernel/drivers/usb/host/ehci-ppc-of.c')
-rw-r--r-- | kernel/drivers/usb/host/ehci-ppc-of.c | 239 |
1 files changed, 239 insertions, 0 deletions
diff --git a/kernel/drivers/usb/host/ehci-ppc-of.c b/kernel/drivers/usb/host/ehci-ppc-of.c new file mode 100644 index 000000000..1a10c8d54 --- /dev/null +++ b/kernel/drivers/usb/host/ehci-ppc-of.c @@ -0,0 +1,239 @@ +/* + * EHCI HCD (Host Controller Driver) for USB. + * + * Bus Glue for PPC On-Chip EHCI driver on the of_platform bus + * Tested on AMCC PPC 440EPx + * + * Valentine Barshak <vbarshak@ru.mvista.com> + * + * Based on "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de> + * and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com> + * + * This file is licenced under the GPL. + */ + +#include <linux/err.h> +#include <linux/signal.h> + +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> + + +static const struct hc_driver ehci_ppc_of_hc_driver = { + .description = hcd_name, + .product_desc = "OF EHCI", + .hcd_priv_size = sizeof(struct ehci_hcd), + + /* + * generic hardware linkage + */ + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, + + /* + * basic lifecycle operations + */ + .reset = ehci_setup, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, +#endif + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + + +/* + * 440EPx Errata USBH_3 + * Fix: Enable Break Memory Transfer (BMT) in INSNREG3 + */ +#define PPC440EPX_EHCI0_INSREG_BMT (0x1 << 0) +static int +ppc44x_enable_bmt(struct device_node *dn) +{ + __iomem u32 *insreg_virt; + + insreg_virt = of_iomap(dn, 1); + if (!insreg_virt) + return -EINVAL; + + out_be32(insreg_virt + 3, PPC440EPX_EHCI0_INSREG_BMT); + + iounmap(insreg_virt); + return 0; +} + + +static int ehci_hcd_ppc_of_probe(struct platform_device *op) +{ + struct device_node *dn = op->dev.of_node; + struct usb_hcd *hcd; + struct ehci_hcd *ehci = NULL; + struct resource res; + int irq; + int rv; + + struct device_node *np; + + if (usb_disabled()) + return -ENODEV; + + dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n"); + + rv = of_address_to_resource(dn, 0, &res); + if (rv) + return rv; + + hcd = usb_create_hcd(&ehci_ppc_of_hc_driver, &op->dev, "PPC-OF USB"); + if (!hcd) + return -ENOMEM; + + hcd->rsrc_start = res.start; + hcd->rsrc_len = resource_size(&res); + + irq = irq_of_parse_and_map(dn, 0); + if (irq == NO_IRQ) { + dev_err(&op->dev, "%s: irq_of_parse_and_map failed\n", + __FILE__); + rv = -EBUSY; + goto err_irq; + } + + hcd->regs = devm_ioremap_resource(&op->dev, &res); + if (IS_ERR(hcd->regs)) { + rv = PTR_ERR(hcd->regs); + goto err_ioremap; + } + + ehci = hcd_to_ehci(hcd); + np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx"); + if (np != NULL) { + /* claim we really affected by usb23 erratum */ + if (!of_address_to_resource(np, 0, &res)) + ehci->ohci_hcctrl_reg = + devm_ioremap(&op->dev, + res.start + OHCI_HCCTRL_OFFSET, + OHCI_HCCTRL_LEN); + else + pr_debug("%s: no ohci offset in fdt\n", __FILE__); + if (!ehci->ohci_hcctrl_reg) { + pr_debug("%s: ioremap for ohci hcctrl failed\n", __FILE__); + } else { + ehci->has_amcc_usb23 = 1; + } + } + + if (of_get_property(dn, "big-endian", NULL)) { + ehci->big_endian_mmio = 1; + ehci->big_endian_desc = 1; + } + if (of_get_property(dn, "big-endian-regs", NULL)) + ehci->big_endian_mmio = 1; + if (of_get_property(dn, "big-endian-desc", NULL)) + ehci->big_endian_desc = 1; + + ehci->caps = hcd->regs; + + if (of_device_is_compatible(dn, "ibm,usb-ehci-440epx")) { + rv = ppc44x_enable_bmt(dn); + ehci_dbg(ehci, "Break Memory Transfer (BMT) is %senabled!\n", + rv ? "NOT ": ""); + } + + rv = usb_add_hcd(hcd, irq, 0); + if (rv) + goto err_ioremap; + + device_wakeup_enable(hcd->self.controller); + return 0; + +err_ioremap: + irq_dispose_mapping(irq); +err_irq: + usb_put_hcd(hcd); + + return rv; +} + + +static int ehci_hcd_ppc_of_remove(struct platform_device *op) +{ + struct usb_hcd *hcd = platform_get_drvdata(op); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + struct device_node *np; + struct resource res; + + dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n"); + + usb_remove_hcd(hcd); + + irq_dispose_mapping(hcd->irq); + + /* use request_mem_region to test if the ohci driver is loaded. if so + * ensure the ohci core is operational. + */ + if (ehci->has_amcc_usb23) { + np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx"); + if (np != NULL) { + if (!of_address_to_resource(np, 0, &res)) + if (!request_mem_region(res.start, + 0x4, hcd_name)) + set_ohci_hcfs(ehci, 1); + else + release_mem_region(res.start, 0x4); + else + pr_debug("%s: no ohci offset in fdt\n", __FILE__); + of_node_put(np); + } + } + usb_put_hcd(hcd); + + return 0; +} + + +static const struct of_device_id ehci_hcd_ppc_of_match[] = { + { + .compatible = "usb-ehci", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, ehci_hcd_ppc_of_match); + + +static struct platform_driver ehci_hcd_ppc_of_driver = { + .probe = ehci_hcd_ppc_of_probe, + .remove = ehci_hcd_ppc_of_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver = { + .name = "ppc-of-ehci", + .of_match_table = ehci_hcd_ppc_of_match, + }, +}; |