summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/usb/gadget/legacy/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/usb/gadget/legacy/Kconfig')
-rw-r--r--kernel/drivers/usb/gadget/legacy/Kconfig481
1 files changed, 481 insertions, 0 deletions
diff --git a/kernel/drivers/usb/gadget/legacy/Kconfig b/kernel/drivers/usb/gadget/legacy/Kconfig
new file mode 100644
index 000000000..d5a7102de
--- /dev/null
+++ b/kernel/drivers/usb/gadget/legacy/Kconfig
@@ -0,0 +1,481 @@
+#
+# USB Gadget support on a system involves
+# (a) a peripheral controller, and
+# (b) the gadget driver using it.
+#
+# NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
+#
+# - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
+# - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
+# - Some systems have both kinds of controllers.
+#
+# With help from a special transceiver and a "Mini-AB" jack, systems with
+# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
+#
+
+config USB_ZERO
+ tristate "Gadget Zero (DEVELOPMENT)"
+ select USB_LIBCOMPOSITE
+ select USB_F_SS_LB
+ help
+ Gadget Zero is a two-configuration device. It either sinks and
+ sources bulk data; or it loops back a configurable number of
+ transfers. It also implements control requests, for "chapter 9"
+ conformance. The driver needs only two bulk-capable endpoints, so
+ it can work on top of most device-side usb controllers. It's
+ useful for testing, and is also a working example showing how
+ USB "gadget drivers" can be written.
+
+ Make this be the first driver you try using on top of any new
+ USB peripheral controller driver. Then you can use host-side
+ test software, like the "usbtest" driver, to put your hardware
+ and its driver through a basic set of functional tests.
+
+ Gadget Zero also works with the host-side "usb-skeleton" driver,
+ and with many kinds of host-side test software. You may need
+ to tweak product and vendor IDs before host software knows about
+ this device, and arrange to select an appropriate configuration.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_zero".
+
+config USB_ZERO_HNPTEST
+ bool "HNP Test Device"
+ depends on USB_ZERO && USB_OTG
+ help
+ You can configure this device to enumerate using the device
+ identifiers of the USB-OTG test device. That means that when
+ this gadget connects to another OTG device, with this one using
+ the "B-Peripheral" role, that device will use HNP to let this
+ one serve as the USB host instead (in the "B-Host" role).
+
+config USB_AUDIO
+ tristate "Audio Gadget"
+ depends on SND
+ select USB_LIBCOMPOSITE
+ select SND_PCM
+ select USB_F_UAC1 if GADGET_UAC1
+ select USB_F_UAC2 if !GADGET_UAC1
+ help
+ This Gadget Audio driver is compatible with USB Audio Class
+ specification 2.0. It implements 1 AudioControl interface,
+ 1 AudioStreaming Interface each for USB-OUT and USB-IN.
+ Number of channels, sample rate and sample size can be
+ specified as module parameters.
+ This driver doesn't expect any real Audio codec to be present
+ on the device - the audio streams are simply sinked to and
+ sourced from a virtual ALSA sound card created. The user-space
+ application may choose to do whatever it wants with the data
+ received from the USB Host and choose to provide whatever it
+ wants as audio data to the USB Host.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_audio".
+
+config GADGET_UAC1
+ bool "UAC 1.0 (Legacy)"
+ depends on USB_AUDIO
+ help
+ If you instead want older UAC Spec-1.0 driver that also has audio
+ paths hardwired to the Audio codec chip on-board and doesn't work
+ without one.
+
+config USB_ETH
+ tristate "Ethernet Gadget (with CDC Ethernet support)"
+ depends on NET
+ select USB_LIBCOMPOSITE
+ select USB_U_ETHER
+ select USB_F_ECM
+ select USB_F_SUBSET
+ select CRC32
+ help
+ This driver implements Ethernet style communication, in one of
+ several ways:
+
+ - The "Communication Device Class" (CDC) Ethernet Control Model.
+ That protocol is often avoided with pure Ethernet adapters, in
+ favor of simpler vendor-specific hardware, but is widely
+ supported by firmware for smart network devices.
+
+ - On hardware can't implement that protocol, a simple CDC subset
+ is used, placing fewer demands on USB.
+
+ - CDC Ethernet Emulation Model (EEM) is a newer standard that has
+ a simpler interface that can be used by more USB hardware.
+
+ RNDIS support is an additional option, more demanding than than
+ subset.
+
+ Within the USB device, this gadget driver exposes a network device
+ "usbX", where X depends on what other networking devices you have.
+ Treat it like a two-node Ethernet link: host, and gadget.
+
+ The Linux-USB host-side "usbnet" driver interoperates with this
+ driver, so that deep I/O queues can be supported. On 2.4 kernels,
+ use "CDCEther" instead, if you're using the CDC option. That CDC
+ mode should also interoperate with standard CDC Ethernet class
+ drivers on other host operating systems.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_ether".
+
+config USB_ETH_RNDIS
+ bool "RNDIS support"
+ depends on USB_ETH
+ select USB_LIBCOMPOSITE
+ select USB_F_RNDIS
+ default y
+ help
+ Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
+ and Microsoft provides redistributable binary RNDIS drivers for
+ older versions of Windows.
+
+ If you say "y" here, the Ethernet gadget driver will try to provide
+ a second device configuration, supporting RNDIS to talk to such
+ Microsoft USB hosts.
+
+ To make MS-Windows work with this, use Documentation/usb/linux.inf
+ as the "driver info file". For versions of MS-Windows older than
+ XP, you'll need to download drivers from Microsoft's website; a URL
+ is given in comments found in that info file.
+
+config USB_ETH_EEM
+ bool "Ethernet Emulation Model (EEM) support"
+ depends on USB_ETH
+ select USB_LIBCOMPOSITE
+ select USB_F_EEM
+ default n
+ help
+ CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
+ and therefore can be supported by more hardware. Technically ECM and
+ EEM are designed for different applications. The ECM model extends
+ the network interface to the target (e.g. a USB cable modem), and the
+ EEM model is for mobile devices to communicate with hosts using
+ ethernet over USB. For Linux gadgets, however, the interface with
+ the host is the same (a usbX device), so the differences are minimal.
+
+ If you say "y" here, the Ethernet gadget driver will use the EEM
+ protocol rather than ECM. If unsure, say "n".
+
+config USB_G_NCM
+ tristate "Network Control Model (NCM) support"
+ depends on NET
+ select USB_LIBCOMPOSITE
+ select USB_U_ETHER
+ select USB_F_NCM
+ select CRC32
+ help
+ This driver implements USB CDC NCM subclass standard. NCM is
+ an advanced protocol for Ethernet encapsulation, allows grouping
+ of several ethernet frames into one USB transfer and different
+ alignment possibilities.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_ncm".
+
+config USB_GADGETFS
+ tristate "Gadget Filesystem"
+ help
+ This driver provides a filesystem based API that lets user mode
+ programs implement a single-configuration USB device, including
+ endpoint I/O and control requests that don't relate to enumeration.
+ All endpoints, transfer speeds, and transfer types supported by
+ the hardware are available, through read() and write() calls.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "gadgetfs".
+
+config USB_FUNCTIONFS
+ tristate "Function Filesystem"
+ select USB_LIBCOMPOSITE
+ select USB_F_FS
+ select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS)
+ help
+ The Function Filesystem (FunctionFS) lets one create USB
+ composite functions in user space in the same way GadgetFS
+ lets one create USB gadgets in user space. This allows creation
+ of composite gadgets such that some of the functions are
+ implemented in kernel space (for instance Ethernet, serial or
+ mass storage) and other are implemented in user space.
+
+ If you say "y" or "m" here you will be able what kind of
+ configurations the gadget will provide.
+
+ Say "y" to link the driver statically, or "m" to build
+ a dynamically linked module called "g_ffs".
+
+config USB_FUNCTIONFS_ETH
+ bool "Include configuration with CDC ECM (Ethernet)"
+ depends on USB_FUNCTIONFS && NET
+ select USB_U_ETHER
+ select USB_F_ECM
+ select USB_F_SUBSET
+ help
+ Include a configuration with CDC ECM function (Ethernet) and the
+ Function Filesystem.
+
+config USB_FUNCTIONFS_RNDIS
+ bool "Include configuration with RNDIS (Ethernet)"
+ depends on USB_FUNCTIONFS && NET
+ select USB_U_ETHER
+ select USB_F_RNDIS
+ help
+ Include a configuration with RNDIS function (Ethernet) and the Filesystem.
+
+config USB_FUNCTIONFS_GENERIC
+ bool "Include 'pure' configuration"
+ depends on USB_FUNCTIONFS
+ help
+ Include a configuration with the Function Filesystem alone with
+ no Ethernet interface.
+
+config USB_MASS_STORAGE
+ tristate "Mass Storage Gadget"
+ depends on BLOCK
+ select USB_LIBCOMPOSITE
+ select USB_F_MASS_STORAGE
+ help
+ The Mass Storage Gadget acts as a USB Mass Storage disk drive.
+ As its storage repository it can use a regular file or a block
+ device (in much the same way as the "loop" device driver),
+ specified as a module parameter or sysfs option.
+
+ This driver is a replacement for now removed File-backed
+ Storage Gadget (g_file_storage).
+
+ Say "y" to link the driver statically, or "m" to build
+ a dynamically linked module called "g_mass_storage".
+
+config USB_GADGET_TARGET
+ tristate "USB Gadget Target Fabric Module"
+ depends on TARGET_CORE
+ select USB_LIBCOMPOSITE
+ help
+ This fabric is an USB gadget. Two USB protocols are supported that is
+ BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is
+ advertised on alternative interface 0 (primary) and UAS is on
+ alternative interface 1. Both protocols can work on USB2.0 and USB3.0.
+ UAS utilizes the USB 3.0 feature called streams support.
+
+config USB_G_SERIAL
+ tristate "Serial Gadget (with CDC ACM and CDC OBEX support)"
+ depends on TTY
+ select USB_U_SERIAL
+ select USB_F_ACM
+ select USB_F_SERIAL
+ select USB_F_OBEX
+ select USB_LIBCOMPOSITE
+ help
+ The Serial Gadget talks to the Linux-USB generic serial driver.
+ This driver supports a CDC-ACM module option, which can be used
+ to interoperate with MS-Windows hosts or with the Linux-USB
+ "cdc-acm" driver.
+
+ This driver also supports a CDC-OBEX option. You will need a
+ user space OBEX server talking to /dev/ttyGS*, since the kernel
+ itself doesn't implement the OBEX protocol.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_serial".
+
+ For more information, see Documentation/usb/gadget_serial.txt
+ which includes instructions and a "driver info file" needed to
+ make MS-Windows work with CDC ACM.
+
+config USB_MIDI_GADGET
+ tristate "MIDI Gadget"
+ depends on SND
+ select USB_LIBCOMPOSITE
+ select SND_RAWMIDI
+ select USB_F_MIDI
+ help
+ The MIDI Gadget acts as a USB Audio device, with one MIDI
+ input and one MIDI output. These MIDI jacks appear as
+ a sound "card" in the ALSA sound system. Other MIDI
+ connections can then be made on the gadget system, using
+ ALSA's aconnect utility etc.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_midi".
+
+config USB_G_PRINTER
+ tristate "Printer Gadget"
+ select USB_LIBCOMPOSITE
+ select USB_F_PRINTER
+ help
+ The Printer Gadget channels data between the USB host and a
+ userspace program driving the print engine. The user space
+ program reads and writes the device file /dev/g_printer to
+ receive or send printer data. It can use ioctl calls to
+ the device file to get or set printer status.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_printer".
+
+ For more information, see Documentation/usb/gadget_printer.txt
+ which includes sample code for accessing the device file.
+
+if TTY
+
+config USB_CDC_COMPOSITE
+ tristate "CDC Composite Device (Ethernet and ACM)"
+ depends on NET
+ select USB_LIBCOMPOSITE
+ select USB_U_SERIAL
+ select USB_U_ETHER
+ select USB_F_ACM
+ select USB_F_ECM
+ help
+ This driver provides two functions in one configuration:
+ a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link.
+
+ This driver requires four bulk and two interrupt endpoints,
+ plus the ability to handle altsettings. Not all peripheral
+ controllers are that capable.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module.
+
+config USB_G_NOKIA
+ tristate "Nokia composite gadget"
+ depends on PHONET
+ select USB_LIBCOMPOSITE
+ select USB_U_SERIAL
+ select USB_U_ETHER
+ select USB_F_ACM
+ select USB_F_OBEX
+ select USB_F_PHONET
+ select USB_F_ECM
+ help
+ The Nokia composite gadget provides support for acm, obex
+ and phonet in only one composite gadget driver.
+
+ It's only really useful for N900 hardware. If you're building
+ a kernel for N900, say Y or M here. If unsure, say N.
+
+config USB_G_ACM_MS
+ tristate "CDC Composite Device (ACM and mass storage)"
+ depends on BLOCK
+ select USB_LIBCOMPOSITE
+ select USB_U_SERIAL
+ select USB_F_ACM
+ select USB_F_MASS_STORAGE
+ help
+ This driver provides two functions in one configuration:
+ a mass storage, and a CDC ACM (serial port) link.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_acm_ms".
+
+config USB_G_MULTI
+ tristate "Multifunction Composite Gadget"
+ depends on BLOCK && NET
+ select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS
+ select USB_LIBCOMPOSITE
+ select USB_U_SERIAL
+ select USB_U_ETHER
+ select USB_F_ACM
+ select USB_F_MASS_STORAGE
+ help
+ The Multifunction Composite Gadget provides Ethernet (RNDIS
+ and/or CDC Ethernet), mass storage and ACM serial link
+ interfaces.
+
+ You will be asked to choose which of the two configurations is
+ to be available in the gadget. At least one configuration must
+ be chosen to make the gadget usable. Selecting more than one
+ configuration will prevent Windows from automatically detecting
+ the gadget as a composite gadget, so an INF file will be needed to
+ use the gadget.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_multi".
+
+config USB_G_MULTI_RNDIS
+ bool "RNDIS + CDC Serial + Storage configuration"
+ depends on USB_G_MULTI
+ select USB_F_RNDIS
+ default y
+ help
+ This option enables a configuration with RNDIS, CDC Serial and
+ Mass Storage functions available in the Multifunction Composite
+ Gadget. This is the configuration dedicated for Windows since RNDIS
+ is Microsoft's protocol.
+
+ If unsure, say "y".
+
+config USB_G_MULTI_CDC
+ bool "CDC Ethernet + CDC Serial + Storage configuration"
+ depends on USB_G_MULTI
+ default n
+ select USB_F_ECM
+ help
+ This option enables a configuration with CDC Ethernet (ECM), CDC
+ Serial and Mass Storage functions available in the Multifunction
+ Composite Gadget.
+
+ If unsure, say "y".
+
+endif # TTY
+
+config USB_G_HID
+ tristate "HID Gadget"
+ select USB_LIBCOMPOSITE
+ select USB_F_HID
+ help
+ The HID gadget driver provides generic emulation of USB
+ Human Interface Devices (HID).
+
+ For more information, see Documentation/usb/gadget_hid.txt which
+ includes sample code for accessing the device files.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_hid".
+
+# Standalone / single function gadgets
+config USB_G_DBGP
+ tristate "EHCI Debug Device Gadget"
+ depends on TTY
+ select USB_LIBCOMPOSITE
+ help
+ This gadget emulates an EHCI Debug device. This is useful when you want
+ to interact with an EHCI Debug Port.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_dbgp".
+
+if USB_G_DBGP
+choice
+ prompt "EHCI Debug Device mode"
+ default USB_G_DBGP_SERIAL
+
+config USB_G_DBGP_PRINTK
+ depends on USB_G_DBGP
+ bool "printk"
+ help
+ Directly printk() received data. No interaction.
+
+config USB_G_DBGP_SERIAL
+ depends on USB_G_DBGP
+ select USB_U_SERIAL
+ bool "serial"
+ help
+ Userland can interact using /dev/ttyGSxxx.
+endchoice
+endif
+
+# put drivers that need isochronous transfer support (for audio
+# or video class gadget drivers), or specific hardware, here.
+config USB_G_WEBCAM
+ tristate "USB Webcam Gadget"
+ depends on VIDEO_DEV
+ select USB_LIBCOMPOSITE
+ select VIDEOBUF2_VMALLOC
+ select USB_F_UVC
+ help
+ The Webcam Gadget acts as a composite USB Audio and Video Class
+ device. It provides a userspace API to process UVC control requests
+ and stream video data to the host.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_webcam".