summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/usb/dwc3
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/usb/dwc3')
-rw-r--r--kernel/drivers/usb/dwc3/Kconfig14
-rw-r--r--kernel/drivers/usb/dwc3/Makefile6
-rw-r--r--kernel/drivers/usb/dwc3/core.c208
-rw-r--r--kernel/drivers/usb/dwc3/core.h54
-rw-r--r--kernel/drivers/usb/dwc3/dwc3-exynos.c2
-rw-r--r--kernel/drivers/usb/dwc3/dwc3-keystone.c2
-rw-r--r--kernel/drivers/usb/dwc3/dwc3-omap.c79
-rw-r--r--kernel/drivers/usb/dwc3/dwc3-pci.c85
-rw-r--r--kernel/drivers/usb/dwc3/dwc3-qcom.c4
-rw-r--r--kernel/drivers/usb/dwc3/dwc3-st.c16
-rw-r--r--kernel/drivers/usb/dwc3/ep0.c97
-rw-r--r--kernel/drivers/usb/dwc3/gadget.c256
-rw-r--r--kernel/drivers/usb/dwc3/platform_data.h5
-rw-r--r--kernel/drivers/usb/dwc3/ulpi.c91
14 files changed, 666 insertions, 253 deletions
diff --git a/kernel/drivers/usb/dwc3/Kconfig b/kernel/drivers/usb/dwc3/Kconfig
index 827c4f803..5a42c4590 100644
--- a/kernel/drivers/usb/dwc3/Kconfig
+++ b/kernel/drivers/usb/dwc3/Kconfig
@@ -11,6 +11,13 @@ config USB_DWC3
if USB_DWC3
+config USB_DWC3_ULPI
+ bool "Register ULPI PHY Interface"
+ depends on USB_ULPI_BUS=y || USB_ULPI_BUS=USB_DWC3
+ help
+ Select this if you have ULPI type PHY attached to your DWC3
+ controller.
+
choice
bool "DWC3 Mode Selection"
default USB_DWC3_DUAL_ROLE if (USB && USB_GADGET)
@@ -97,11 +104,4 @@ config USB_DWC3_QCOM
Recent Qualcomm SoCs ship with one DesignWare Core USB3 IP inside,
say 'Y' or 'M' if you have one such device.
-comment "Debugging features"
-
-config USB_DWC3_DEBUG
- bool "Enable Debugging Messages"
- help
- Say Y here to enable debugging messages on DWC3 Driver.
-
endif
diff --git a/kernel/drivers/usb/dwc3/Makefile b/kernel/drivers/usb/dwc3/Makefile
index 46172f47f..acc951d46 100644
--- a/kernel/drivers/usb/dwc3/Makefile
+++ b/kernel/drivers/usb/dwc3/Makefile
@@ -1,8 +1,6 @@
# define_trace.h needs to know how to find our header
CFLAGS_trace.o := -I$(src)
-ccflags-$(CONFIG_USB_DWC3_DEBUG) := -DDEBUG
-
obj-$(CONFIG_USB_DWC3) += dwc3.o
dwc3-y := core.o debug.o trace.o
@@ -15,6 +13,10 @@ ifneq ($(filter y,$(CONFIG_USB_DWC3_GADGET) $(CONFIG_USB_DWC3_DUAL_ROLE)),)
dwc3-y += gadget.o ep0.o
endif
+ifneq ($(CONFIG_USB_DWC3_ULPI),)
+ dwc3-y += ulpi.o
+endif
+
ifneq ($(CONFIG_DEBUG_FS),)
dwc3-y += debugfs.o
endif
diff --git a/kernel/drivers/usb/dwc3/core.c b/kernel/drivers/usb/dwc3/core.c
index 2bbab3d86..22b479738 100644
--- a/kernel/drivers/usb/dwc3/core.c
+++ b/kernel/drivers/usb/dwc3/core.c
@@ -34,6 +34,7 @@
#include <linux/dma-mapping.h>
#include <linux/of.h>
#include <linux/acpi.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
@@ -117,6 +118,59 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc)
}
/**
+ * dwc3_soft_reset - Issue soft reset
+ * @dwc: Pointer to our controller context structure
+ */
+static int dwc3_soft_reset(struct dwc3 *dwc)
+{
+ unsigned long timeout;
+ u32 reg;
+
+ timeout = jiffies + msecs_to_jiffies(500);
+ dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST);
+ do {
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ if (!(reg & DWC3_DCTL_CSFTRST))
+ break;
+
+ if (time_after(jiffies, timeout)) {
+ dev_err(dwc->dev, "Reset Timed Out\n");
+ return -ETIMEDOUT;
+ }
+
+ cpu_relax();
+ } while (true);
+
+ return 0;
+}
+
+/*
+ * dwc3_frame_length_adjustment - Adjusts frame length if required
+ * @dwc3: Pointer to our controller context structure
+ * @fladj: Value of GFLADJ_30MHZ to adjust frame length
+ */
+static void dwc3_frame_length_adjustment(struct dwc3 *dwc, u32 fladj)
+{
+ u32 reg;
+ u32 dft;
+
+ if (dwc->revision < DWC3_REVISION_250A)
+ return;
+
+ if (fladj == 0)
+ return;
+
+ reg = dwc3_readl(dwc->regs, DWC3_GFLADJ);
+ dft = reg & DWC3_GFLADJ_30MHZ_MASK;
+ if (!dev_WARN_ONCE(dwc->dev, dft == fladj,
+ "request value same as default, ignoring\n")) {
+ reg &= ~DWC3_GFLADJ_30MHZ_MASK;
+ reg |= DWC3_GFLADJ_30MHZ_SDBND_SEL | fladj;
+ dwc3_writel(dwc->regs, DWC3_GFLADJ, reg);
+ }
+}
+
+/**
* dwc3_free_one_event_buffer - Frees one event buffer
* @dwc: Pointer to our controller context structure
* @evt: Pointer to event buffer to be freed
@@ -367,10 +421,15 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc)
/**
* dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
* @dwc: Pointer to our controller context structure
+ *
+ * Returns 0 on success. The USB PHY interfaces are configured but not
+ * initialized. The PHY interfaces and the PHYs get initialized together with
+ * the core in dwc3_core_init.
*/
-static void dwc3_phy_setup(struct dwc3 *dwc)
+static int dwc3_phy_setup(struct dwc3 *dwc)
{
u32 reg;
+ int ret;
reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
@@ -409,10 +468,41 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
- mdelay(100);
-
reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+ /* Select the HS PHY interface */
+ switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) {
+ case DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI:
+ if (dwc->hsphy_interface &&
+ !strncmp(dwc->hsphy_interface, "utmi", 4)) {
+ reg &= ~DWC3_GUSB2PHYCFG_ULPI_UTMI;
+ break;
+ } else if (dwc->hsphy_interface &&
+ !strncmp(dwc->hsphy_interface, "ulpi", 4)) {
+ reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI;
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+ } else {
+ /* Relying on default value. */
+ if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI))
+ break;
+ }
+ /* FALLTHROUGH */
+ case DWC3_GHWPARAMS3_HSPHY_IFC_ULPI:
+ /* Making sure the interface and PHY are operational */
+ ret = dwc3_soft_reset(dwc);
+ if (ret)
+ return ret;
+
+ udelay(1);
+
+ ret = dwc3_ulpi_init(dwc);
+ if (ret)
+ return ret;
+ /* FALLTHROUGH */
+ default:
+ break;
+ }
+
/*
* Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to
* '0' during coreConsultant configuration. So default value will
@@ -425,9 +515,12 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
if (dwc->dis_u2_susphy_quirk)
reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+ if (dwc->dis_enblslpm_quirk)
+ reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM;
+
dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
- mdelay(100);
+ return 0;
}
/**
@@ -438,19 +531,24 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
*/
static int dwc3_core_init(struct dwc3 *dwc)
{
- unsigned long timeout;
u32 hwparams4 = dwc->hwparams.hwparams4;
u32 reg;
int ret;
reg = dwc3_readl(dwc->regs, DWC3_GSNPSID);
/* This should read as U3 followed by revision number */
- if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) {
+ if ((reg & DWC3_GSNPSID_MASK) == 0x55330000) {
+ /* Detected DWC_usb3 IP */
+ dwc->revision = reg;
+ } else if ((reg & DWC3_GSNPSID_MASK) == 0x33310000) {
+ /* Detected DWC_usb31 IP */
+ dwc->revision = dwc3_readl(dwc->regs, DWC3_VER_NUMBER);
+ dwc->revision |= DWC3_REVISION_IS_DWC31;
+ } else {
dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
ret = -ENODEV;
goto err0;
}
- dwc->revision = reg;
/*
* Write Linux Version Code to our GUID register so it's easy to figure
@@ -466,21 +564,9 @@ static int dwc3_core_init(struct dwc3 *dwc)
}
/* issue device SoftReset too */
- timeout = jiffies + msecs_to_jiffies(500);
- dwc3_writel(dwc->regs, DWC3_DCTL, DWC3_DCTL_CSFTRST);
- do {
- reg = dwc3_readl(dwc->regs, DWC3_DCTL);
- if (!(reg & DWC3_DCTL_CSFTRST))
- break;
-
- if (time_after(jiffies, timeout)) {
- dev_err(dwc->dev, "Reset Timed Out\n");
- ret = -ETIMEDOUT;
- goto err0;
- }
-
- cpu_relax();
- } while (true);
+ ret = dwc3_soft_reset(dwc);
+ if (ret)
+ goto err0;
ret = dwc3_core_soft_reset(dwc);
if (ret)
@@ -555,8 +641,6 @@ static int dwc3_core_init(struct dwc3 *dwc)
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
- dwc3_phy_setup(dwc);
-
ret = dwc3_alloc_scratch_buffers(dwc);
if (ret)
goto err1;
@@ -725,12 +809,12 @@ static int dwc3_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct dwc3_platform_data *pdata = dev_get_platdata(dev);
- struct device_node *node = dev->of_node;
struct resource *res;
struct dwc3 *dwc;
u8 lpm_nyet_threshold;
u8 tx_de_emphasis;
u8 hird_threshold;
+ u32 fladj = 0;
int ret;
@@ -794,49 +878,56 @@ static int dwc3_probe(struct platform_device *pdev)
*/
hird_threshold = 12;
- if (node) {
- dwc->maximum_speed = of_usb_get_maximum_speed(node);
- dwc->has_lpm_erratum = of_property_read_bool(node,
+ dwc->maximum_speed = usb_get_maximum_speed(dev);
+ dwc->dr_mode = usb_get_dr_mode(dev);
+
+ dwc->has_lpm_erratum = device_property_read_bool(dev,
"snps,has-lpm-erratum");
- of_property_read_u8(node, "snps,lpm-nyet-threshold",
+ device_property_read_u8(dev, "snps,lpm-nyet-threshold",
&lpm_nyet_threshold);
- dwc->is_utmi_l1_suspend = of_property_read_bool(node,
+ dwc->is_utmi_l1_suspend = device_property_read_bool(dev,
"snps,is-utmi-l1-suspend");
- of_property_read_u8(node, "snps,hird-threshold",
+ device_property_read_u8(dev, "snps,hird-threshold",
&hird_threshold);
- dwc->usb3_lpm_capable = of_property_read_bool(node,
+ dwc->usb3_lpm_capable = device_property_read_bool(dev,
"snps,usb3_lpm_capable");
- dwc->needs_fifo_resize = of_property_read_bool(node,
+ dwc->needs_fifo_resize = device_property_read_bool(dev,
"tx-fifo-resize");
- dwc->dr_mode = of_usb_get_dr_mode(node);
- dwc->disable_scramble_quirk = of_property_read_bool(node,
+ dwc->disable_scramble_quirk = device_property_read_bool(dev,
"snps,disable_scramble_quirk");
- dwc->u2exit_lfps_quirk = of_property_read_bool(node,
+ dwc->u2exit_lfps_quirk = device_property_read_bool(dev,
"snps,u2exit_lfps_quirk");
- dwc->u2ss_inp3_quirk = of_property_read_bool(node,
+ dwc->u2ss_inp3_quirk = device_property_read_bool(dev,
"snps,u2ss_inp3_quirk");
- dwc->req_p1p2p3_quirk = of_property_read_bool(node,
+ dwc->req_p1p2p3_quirk = device_property_read_bool(dev,
"snps,req_p1p2p3_quirk");
- dwc->del_p1p2p3_quirk = of_property_read_bool(node,
+ dwc->del_p1p2p3_quirk = device_property_read_bool(dev,
"snps,del_p1p2p3_quirk");
- dwc->del_phy_power_chg_quirk = of_property_read_bool(node,
+ dwc->del_phy_power_chg_quirk = device_property_read_bool(dev,
"snps,del_phy_power_chg_quirk");
- dwc->lfps_filter_quirk = of_property_read_bool(node,
+ dwc->lfps_filter_quirk = device_property_read_bool(dev,
"snps,lfps_filter_quirk");
- dwc->rx_detect_poll_quirk = of_property_read_bool(node,
+ dwc->rx_detect_poll_quirk = device_property_read_bool(dev,
"snps,rx_detect_poll_quirk");
- dwc->dis_u3_susphy_quirk = of_property_read_bool(node,
+ dwc->dis_u3_susphy_quirk = device_property_read_bool(dev,
"snps,dis_u3_susphy_quirk");
- dwc->dis_u2_susphy_quirk = of_property_read_bool(node,
+ dwc->dis_u2_susphy_quirk = device_property_read_bool(dev,
"snps,dis_u2_susphy_quirk");
+ dwc->dis_enblslpm_quirk = device_property_read_bool(dev,
+ "snps,dis_enblslpm_quirk");
- dwc->tx_de_emphasis_quirk = of_property_read_bool(node,
+ dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
"snps,tx_de_emphasis_quirk");
- of_property_read_u8(node, "snps,tx_de_emphasis",
+ device_property_read_u8(dev, "snps,tx_de_emphasis",
&tx_de_emphasis);
- } else if (pdata) {
+ device_property_read_string(dev, "snps,hsphy_interface",
+ &dwc->hsphy_interface);
+ device_property_read_u32(dev, "snps,quirk-frame-length-adjustment",
+ &fladj);
+
+ if (pdata) {
dwc->maximum_speed = pdata->maximum_speed;
dwc->has_lpm_erratum = pdata->has_lpm_erratum;
if (pdata->lpm_nyet_threshold)
@@ -859,10 +950,14 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->rx_detect_poll_quirk = pdata->rx_detect_poll_quirk;
dwc->dis_u3_susphy_quirk = pdata->dis_u3_susphy_quirk;
dwc->dis_u2_susphy_quirk = pdata->dis_u2_susphy_quirk;
+ dwc->dis_enblslpm_quirk = pdata->dis_enblslpm_quirk;
dwc->tx_de_emphasis_quirk = pdata->tx_de_emphasis_quirk;
if (pdata->tx_de_emphasis)
tx_de_emphasis = pdata->tx_de_emphasis;
+
+ dwc->hsphy_interface = pdata->hsphy_interface;
+ fladj = pdata->fladj_value;
}
/* default to superspeed if no maximum_speed passed */
@@ -875,12 +970,18 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->hird_threshold = hird_threshold
| (dwc->is_utmi_l1_suspend << 4);
+ platform_set_drvdata(pdev, dwc);
+ dwc3_cache_hwparams(dwc);
+
+ ret = dwc3_phy_setup(dwc);
+ if (ret)
+ goto err0;
+
ret = dwc3_core_get_phy(dwc);
if (ret)
goto err0;
spin_lock_init(&dwc->lock);
- platform_set_drvdata(pdev, dwc);
if (!dev->dma_mask) {
dev->dma_mask = dev->parent->dma_mask;
@@ -892,8 +993,6 @@ static int dwc3_probe(struct platform_device *pdev)
pm_runtime_get_sync(dev);
pm_runtime_forbid(dev);
- dwc3_cache_hwparams(dwc);
-
ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE);
if (ret) {
dev_err(dwc->dev, "failed to allocate event buffers\n");
@@ -915,6 +1014,9 @@ static int dwc3_probe(struct platform_device *pdev)
goto err1;
}
+ /* Adjust Frame Length */
+ dwc3_frame_length_adjustment(dwc, fladj);
+
usb_phy_set_suspend(dwc->usb2_phy, 0);
usb_phy_set_suspend(dwc->usb3_phy, 0);
ret = phy_power_on(dwc->usb2_generic_phy);
@@ -964,6 +1066,7 @@ err2:
err1:
dwc3_free_event_buffers(dwc);
+ dwc3_ulpi_exit(dwc);
err0:
/*
@@ -999,6 +1102,7 @@ static int dwc3_remove(struct platform_device *pdev)
phy_power_off(dwc->usb3_generic_phy);
dwc3_core_exit(dwc);
+ dwc3_ulpi_exit(dwc);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
@@ -1033,6 +1137,8 @@ static int dwc3_suspend(struct device *dev)
phy_exit(dwc->usb2_generic_phy);
phy_exit(dwc->usb3_generic_phy);
+ pinctrl_pm_select_sleep_state(dev);
+
return 0;
}
@@ -1042,6 +1148,8 @@ static int dwc3_resume(struct device *dev)
unsigned long flags;
int ret;
+ pinctrl_pm_select_default_state(dev);
+
usb_phy_init(dwc->usb3_phy);
usb_phy_init(dwc->usb2_phy);
ret = phy_init(dwc->usb2_generic_phy);
diff --git a/kernel/drivers/usb/dwc3/core.h b/kernel/drivers/usb/dwc3/core.h
index c0eafa6fd..78be201d8 100644
--- a/kernel/drivers/usb/dwc3/core.h
+++ b/kernel/drivers/usb/dwc3/core.h
@@ -30,6 +30,7 @@
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/otg.h>
+#include <linux/ulpi/interface.h>
#include <linux/phy/phy.h>
@@ -107,6 +108,9 @@
#define DWC3_GPRTBIMAP_FS0 0xc188
#define DWC3_GPRTBIMAP_FS1 0xc18c
+#define DWC3_VER_NUMBER 0xc1a0
+#define DWC3_VER_TYPE 0xc1a4
+
#define DWC3_GUSB2PHYCFG(n) (0xc200 + (n * 0x04))
#define DWC3_GUSB2I2CCTL(n) (0xc240 + (n * 0x04))
@@ -123,6 +127,7 @@
#define DWC3_GEVNTCOUNT(n) (0xc40c + (n * 0x10))
#define DWC3_GHWPARAMS8 0xc600
+#define DWC3_GFLADJ 0xc630
/* Device Registers */
#define DWC3_DCFG 0xc700
@@ -173,6 +178,16 @@
/* Global USB2 PHY Configuration Register */
#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31)
#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6)
+#define DWC3_GUSB2PHYCFG_ULPI_UTMI (1 << 4)
+#define DWC3_GUSB2PHYCFG_ENBLSLPM (1 << 8)
+
+/* Global USB2 PHY Vendor Control Register */
+#define DWC3_GUSB2PHYACC_NEWREGREQ (1 << 25)
+#define DWC3_GUSB2PHYACC_BUSY (1 << 23)
+#define DWC3_GUSB2PHYACC_WRITE (1 << 22)
+#define DWC3_GUSB2PHYACC_ADDR(n) (n << 16)
+#define DWC3_GUSB2PHYACC_EXTEND_ADDR(n) (n << 8)
+#define DWC3_GUSB2PHYACC_DATA(n) (n & 0xff)
/* Global USB3 PIPE Control Register */
#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31)
@@ -224,6 +239,10 @@
/* Global HWPARAMS6 Register */
#define DWC3_GHWPARAMS6_EN_FPGA (1 << 7)
+/* Global Frame Length Adjustment Register */
+#define DWC3_GFLADJ_30MHZ_SDBND_SEL (1 << 7)
+#define DWC3_GFLADJ_30MHZ_MASK 0x3f
+
/* Device Configuration Register */
#define DWC3_DCFG_DEVADDR(addr) ((addr) << 3)
#define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f)
@@ -652,6 +671,7 @@ struct dwc3_scratchpad_array {
* @usb3_phy: pointer to USB3 PHY
* @usb2_generic_phy: pointer to USB2 PHY
* @usb3_generic_phy: pointer to USB3 PHY
+ * @ulpi: pointer to ulpi interface
* @dcfg: saved contents of DCFG register
* @gctl: saved contents of GCTL register
* @isoch_delay: wValue from Set Isochronous Delay request;
@@ -673,6 +693,7 @@ struct dwc3_scratchpad_array {
* @test_mode_nr: test feature selector
* @lpm_nyet_threshold: LPM NYET response threshold
* @hird_threshold: HIRD threshold
+ * @hsphy_interface: "utmi" or "ulpi"
* @delayed_status: true when gadget driver asks for delayed status
* @ep0_bounced: true when we used bounce buffer
* @ep0_expect_in: true when we expect a DATA IN transfer
@@ -700,6 +721,8 @@ struct dwc3_scratchpad_array {
* @rx_detect_poll_quirk: set if we enable rx_detect to polling lfps quirk
* @dis_u3_susphy_quirk: set if we disable usb3 suspend phy
* @dis_u2_susphy_quirk: set if we disable usb2 suspend phy
+ * @dis_enblslpm_quirk: set if we clear enblslpm in GUSB2PHYCFG,
+ * disabling the suspend signal to the PHY.
* @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
* @tx_de_emphasis: Tx de-emphasis value
* 0 - -6dB de-emphasis
@@ -739,6 +762,8 @@ struct dwc3 {
struct phy *usb2_generic_phy;
struct phy *usb3_generic_phy;
+ struct ulpi *ulpi;
+
void __iomem *regs;
size_t regs_size;
@@ -752,6 +777,14 @@ struct dwc3 {
u32 num_event_buffers;
u32 u1u2;
u32 maximum_speed;
+
+ /*
+ * All 3.1 IP version constants are greater than the 3.0 IP
+ * version constants. This works for most version checks in
+ * dwc3. However, in the future, this may not apply as
+ * features may be developed on newer versions of the 3.0 IP
+ * that are not in the 3.1 IP.
+ */
u32 revision;
#define DWC3_REVISION_173A 0x5533173a
@@ -774,6 +807,13 @@ struct dwc3 {
#define DWC3_REVISION_270A 0x5533270a
#define DWC3_REVISION_280A 0x5533280a
+/*
+ * NOTICE: we're using bit 31 as a "is usb 3.1" flag. This is really
+ * just so dwc31 revisions are always larger than dwc3.
+ */
+#define DWC3_REVISION_IS_DWC31 0x80000000
+#define DWC3_USB31_REVISION_110A (0x3131302a | DWC3_REVISION_IS_USB31)
+
enum dwc3_ep0_next ep0_next_event;
enum dwc3_ep0_state ep0state;
enum dwc3_link_state link_state;
@@ -800,6 +840,8 @@ struct dwc3 {
u8 lpm_nyet_threshold;
u8 hird_threshold;
+ const char *hsphy_interface;
+
unsigned delayed_status:1;
unsigned ep0_bounced:1;
unsigned ep0_expect_in:1;
@@ -811,7 +853,6 @@ struct dwc3 {
unsigned pullups_connected:1;
unsigned resize_fifos:1;
unsigned setup_packet_pending:1;
- unsigned start_config_issued:1;
unsigned three_stage_setup:1;
unsigned usb3_lpm_capable:1;
@@ -825,6 +866,7 @@ struct dwc3 {
unsigned rx_detect_poll_quirk:1;
unsigned dis_u3_susphy_quirk:1;
unsigned dis_u2_susphy_quirk:1;
+ unsigned dis_enblslpm_quirk:1;
unsigned tx_de_emphasis_quirk:1;
unsigned tx_de_emphasis:2;
@@ -1035,4 +1077,14 @@ static inline int dwc3_gadget_resume(struct dwc3 *dwc)
}
#endif /* !IS_ENABLED(CONFIG_USB_DWC3_HOST) */
+#if IS_ENABLED(CONFIG_USB_DWC3_ULPI)
+int dwc3_ulpi_init(struct dwc3 *dwc);
+void dwc3_ulpi_exit(struct dwc3 *dwc);
+#else
+static inline int dwc3_ulpi_init(struct dwc3 *dwc)
+{ return 0; }
+static inline void dwc3_ulpi_exit(struct dwc3 *dwc)
+{ }
+#endif
+
#endif /* __DRIVERS_USB_DWC3_CORE_H */
diff --git a/kernel/drivers/usb/dwc3/dwc3-exynos.c b/kernel/drivers/usb/dwc3/dwc3-exynos.c
index 7bd0a95b2..dd5cb5577 100644
--- a/kernel/drivers/usb/dwc3/dwc3-exynos.c
+++ b/kernel/drivers/usb/dwc3/dwc3-exynos.c
@@ -145,7 +145,7 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
exynos->susp_clk = devm_clk_get(dev, "usbdrd30_susp_clk");
if (IS_ERR(exynos->susp_clk)) {
- dev_dbg(dev, "no suspend clk specified\n");
+ dev_info(dev, "no suspend clk specified\n");
exynos->susp_clk = NULL;
}
clk_prepare_enable(exynos->susp_clk);
diff --git a/kernel/drivers/usb/dwc3/dwc3-keystone.c b/kernel/drivers/usb/dwc3/dwc3-keystone.c
index fe3b9335a..2be268d24 100644
--- a/kernel/drivers/usb/dwc3/dwc3-keystone.c
+++ b/kernel/drivers/usb/dwc3/dwc3-keystone.c
@@ -115,7 +115,7 @@ static int kdwc3_probe(struct platform_device *pdev)
error = clk_prepare_enable(kdwc->clk);
if (error < 0) {
- dev_dbg(kdwc->dev, "unable to enable usb clock, err %d\n",
+ dev_err(kdwc->dev, "unable to enable usb clock, error %d\n",
error);
return error;
}
diff --git a/kernel/drivers/usb/dwc3/dwc3-omap.c b/kernel/drivers/usb/dwc3/dwc3-omap.c
index 6b486a368..22e9606d8 100644
--- a/kernel/drivers/usb/dwc3/dwc3-omap.c
+++ b/kernel/drivers/usb/dwc3/dwc3-omap.c
@@ -128,8 +128,7 @@ struct dwc3_omap {
u32 dma_status:1;
- struct extcon_specific_cable_nb extcon_vbus_dev;
- struct extcon_specific_cable_nb extcon_id_dev;
+ struct extcon_dev *edev;
struct notifier_block vbus_nb;
struct notifier_block id_nb;
@@ -225,12 +224,10 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
switch (status) {
case OMAP_DWC3_ID_GROUND:
- dev_dbg(omap->dev, "ID GND\n");
-
if (omap->vbus_reg) {
ret = regulator_enable(omap->vbus_reg);
if (ret) {
- dev_dbg(omap->dev, "regulator enable failed\n");
+ dev_err(omap->dev, "regulator enable failed\n");
return;
}
}
@@ -245,8 +242,6 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
break;
case OMAP_DWC3_VBUS_VALID:
- dev_dbg(omap->dev, "VBUS Connect\n");
-
val = dwc3_omap_read_utmi_ctrl(omap);
val &= ~USBOTGSS_UTMI_OTG_CTRL_SESSEND;
val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG
@@ -261,8 +256,6 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
regulator_disable(omap->vbus_reg);
case OMAP_DWC3_VBUS_OFF:
- dev_dbg(omap->dev, "VBUS Disconnect\n");
-
val = dwc3_omap_read_utmi_ctrl(omap);
val &= ~(USBOTGSS_UTMI_OTG_CTRL_SESSVALID
| USBOTGSS_UTMI_OTG_CTRL_VBUSVALID
@@ -273,7 +266,7 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
break;
default:
- dev_dbg(omap->dev, "invalid state\n");
+ dev_WARN(omap->dev, "invalid state\n");
}
}
@@ -284,37 +277,8 @@ static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
reg = dwc3_omap_read_irqmisc_status(omap);
- if (reg & USBOTGSS_IRQMISC_DMADISABLECLR) {
- dev_dbg(omap->dev, "DMA Disable was Cleared\n");
+ if (reg & USBOTGSS_IRQMISC_DMADISABLECLR)
omap->dma_status = false;
- }
-
- if (reg & USBOTGSS_IRQMISC_OEVT)
- dev_dbg(omap->dev, "OTG Event\n");
-
- if (reg & USBOTGSS_IRQMISC_DRVVBUS_RISE)
- dev_dbg(omap->dev, "DRVVBUS Rise\n");
-
- if (reg & USBOTGSS_IRQMISC_CHRGVBUS_RISE)
- dev_dbg(omap->dev, "CHRGVBUS Rise\n");
-
- if (reg & USBOTGSS_IRQMISC_DISCHRGVBUS_RISE)
- dev_dbg(omap->dev, "DISCHRGVBUS Rise\n");
-
- if (reg & USBOTGSS_IRQMISC_IDPULLUP_RISE)
- dev_dbg(omap->dev, "IDPULLUP Rise\n");
-
- if (reg & USBOTGSS_IRQMISC_DRVVBUS_FALL)
- dev_dbg(omap->dev, "DRVVBUS Fall\n");
-
- if (reg & USBOTGSS_IRQMISC_CHRGVBUS_FALL)
- dev_dbg(omap->dev, "CHRGVBUS Fall\n");
-
- if (reg & USBOTGSS_IRQMISC_DISCHRGVBUS_FALL)
- dev_dbg(omap->dev, "DISCHRGVBUS Fall\n");
-
- if (reg & USBOTGSS_IRQMISC_IDPULLUP_FALL)
- dev_dbg(omap->dev, "IDPULLUP Fall\n");
dwc3_omap_write_irqmisc_status(omap, reg);
@@ -434,7 +398,7 @@ static void dwc3_omap_set_utmi_mode(struct dwc3_omap *omap)
reg &= ~USBOTGSS_UTMI_OTG_CTRL_SW_MODE;
break;
default:
- dev_dbg(omap->dev, "UNKNOWN utmi mode %d\n", utmi_mode);
+ dev_WARN(omap->dev, "UNKNOWN utmi mode %d\n", utmi_mode);
}
dwc3_omap_write_utmi_ctrl(omap, reg);
@@ -454,23 +418,23 @@ static int dwc3_omap_extcon_register(struct dwc3_omap *omap)
}
omap->vbus_nb.notifier_call = dwc3_omap_vbus_notifier;
- ret = extcon_register_interest(&omap->extcon_vbus_dev,
- edev->name, "USB",
- &omap->vbus_nb);
+ ret = extcon_register_notifier(edev, EXTCON_USB,
+ &omap->vbus_nb);
if (ret < 0)
dev_vdbg(omap->dev, "failed to register notifier for USB\n");
omap->id_nb.notifier_call = dwc3_omap_id_notifier;
- ret = extcon_register_interest(&omap->extcon_id_dev,
- edev->name, "USB-HOST",
- &omap->id_nb);
+ ret = extcon_register_notifier(edev, EXTCON_USB_HOST,
+ &omap->id_nb);
if (ret < 0)
dev_vdbg(omap->dev, "failed to register notifier for USB-HOST\n");
- if (extcon_get_cable_state(edev, "USB") == true)
+ if (extcon_get_cable_state_(edev, EXTCON_USB) == true)
dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID);
- if (extcon_get_cable_state(edev, "USB-HOST") == true)
+ if (extcon_get_cable_state_(edev, EXTCON_USB_HOST) == true)
dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND);
+
+ omap->edev = edev;
}
return 0;
@@ -550,8 +514,6 @@ static int dwc3_omap_probe(struct platform_device *pdev)
goto err1;
}
- dwc3_omap_enable_irqs(omap);
-
ret = dwc3_omap_extcon_register(omap);
if (ret < 0)
goto err2;
@@ -562,14 +524,13 @@ static int dwc3_omap_probe(struct platform_device *pdev)
goto err3;
}
+ dwc3_omap_enable_irqs(omap);
+
return 0;
err3:
- if (omap->extcon_vbus_dev.edev)
- extcon_unregister_interest(&omap->extcon_vbus_dev);
- if (omap->extcon_id_dev.edev)
- extcon_unregister_interest(&omap->extcon_id_dev);
-
+ extcon_unregister_notifier(omap->edev, EXTCON_USB, &omap->vbus_nb);
+ extcon_unregister_notifier(omap->edev, EXTCON_USB_HOST, &omap->id_nb);
err2:
dwc3_omap_disable_irqs(omap);
@@ -586,10 +547,8 @@ static int dwc3_omap_remove(struct platform_device *pdev)
{
struct dwc3_omap *omap = platform_get_drvdata(pdev);
- if (omap->extcon_vbus_dev.edev)
- extcon_unregister_interest(&omap->extcon_vbus_dev);
- if (omap->extcon_id_dev.edev)
- extcon_unregister_interest(&omap->extcon_id_dev);
+ extcon_unregister_notifier(omap->edev, EXTCON_USB, &omap->vbus_nb);
+ extcon_unregister_notifier(omap->edev, EXTCON_USB_HOST, &omap->id_nb);
dwc3_omap_disable_irqs(omap);
of_platform_depopulate(omap->dev);
pm_runtime_put_sync(&pdev->dev);
diff --git a/kernel/drivers/usb/dwc3/dwc3-pci.c b/kernel/drivers/usb/dwc3/dwc3-pci.c
index b773fb53d..009d83048 100644
--- a/kernel/drivers/usb/dwc3/dwc3-pci.c
+++ b/kernel/drivers/usb/dwc3/dwc3-pci.c
@@ -21,15 +21,30 @@
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/acpi.h>
#include "platform_data.h"
-#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd
-#define PCI_DEVICE_ID_INTEL_BYT 0x0f37
-#define PCI_DEVICE_ID_INTEL_MRFLD 0x119e
-#define PCI_DEVICE_ID_INTEL_BSW 0x22B7
-#define PCI_DEVICE_ID_INTEL_SPTLP 0x9d30
-#define PCI_DEVICE_ID_INTEL_SPTH 0xa130
+#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd
+#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI 0xabce
+#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31 0xabcf
+#define PCI_DEVICE_ID_INTEL_BYT 0x0f37
+#define PCI_DEVICE_ID_INTEL_MRFLD 0x119e
+#define PCI_DEVICE_ID_INTEL_BSW 0x22b7
+#define PCI_DEVICE_ID_INTEL_SPTLP 0x9d30
+#define PCI_DEVICE_ID_INTEL_SPTH 0xa130
+#define PCI_DEVICE_ID_INTEL_BXT 0x0aaa
+#define PCI_DEVICE_ID_INTEL_APL 0x5aaa
+
+static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
+static const struct acpi_gpio_params cs_gpios = { 1, 0, false };
+
+static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = {
+ { "reset-gpios", &reset_gpios, 1 },
+ { "cs-gpios", &cs_gpios, 1 },
+ { },
+};
static int dwc3_pci_quirks(struct pci_dev *pdev)
{
@@ -65,6 +80,52 @@ static int dwc3_pci_quirks(struct pci_dev *pdev)
sizeof(pdata));
}
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
+ struct gpio_desc *gpio;
+
+ acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
+ acpi_dwc3_byt_gpios);
+
+ /*
+ * These GPIOs will turn on the USB2 PHY. Note that we have to
+ * put the gpio descriptors again here because the phy driver
+ * might want to grab them, too.
+ */
+ gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
+ if (IS_ERR(gpio))
+ return PTR_ERR(gpio);
+
+ gpiod_set_value_cansleep(gpio, 1);
+ gpiod_put(gpio);
+
+ gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(gpio))
+ return PTR_ERR(gpio);
+
+ if (gpio) {
+ gpiod_set_value_cansleep(gpio, 1);
+ gpiod_put(gpio);
+ usleep_range(10000, 11000);
+ }
+ }
+
+ if (pdev->vendor == PCI_VENDOR_ID_SYNOPSYS &&
+ (pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 ||
+ pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI ||
+ pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31)) {
+
+ struct dwc3_platform_data pdata;
+
+ memset(&pdata, 0, sizeof(pdata));
+ pdata.usb3_lpm_capable = true;
+ pdata.has_lpm_erratum = true;
+ pdata.dis_enblslpm_quirk = true;
+
+ return platform_device_add_data(pci_get_drvdata(pdev), &pdata,
+ sizeof(pdata));
+ }
+
return 0;
}
@@ -113,6 +174,7 @@ static int dwc3_pci_probe(struct pci_dev *pci,
goto err;
dwc3->dev.parent = dev;
+ ACPI_COMPANION_SET(&dwc3->dev, ACPI_COMPANION(dev));
ret = platform_device_add(dwc3);
if (ret) {
@@ -128,6 +190,7 @@ err:
static void dwc3_pci_remove(struct pci_dev *pci)
{
+ acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pci->dev));
platform_device_unregister(pci_get_drvdata(pci));
}
@@ -136,11 +199,21 @@ static const struct pci_device_id dwc3_pci_id_table[] = {
PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
},
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
+ PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI),
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
+ PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31),
+ },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTLP), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTH), },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
{ } /* Terminating Entry */
};
diff --git a/kernel/drivers/usb/dwc3/dwc3-qcom.c b/kernel/drivers/usb/dwc3/dwc3-qcom.c
index 8c2e8eec8..088026048 100644
--- a/kernel/drivers/usb/dwc3/dwc3-qcom.c
+++ b/kernel/drivers/usb/dwc3/dwc3-qcom.c
@@ -48,13 +48,13 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
qdwc->iface_clk = devm_clk_get(qdwc->dev, "iface");
if (IS_ERR(qdwc->iface_clk)) {
- dev_dbg(qdwc->dev, "failed to get optional iface clock\n");
+ dev_info(qdwc->dev, "failed to get optional iface clock\n");
qdwc->iface_clk = NULL;
}
qdwc->sleep_clk = devm_clk_get(qdwc->dev, "sleep");
if (IS_ERR(qdwc->sleep_clk)) {
- dev_dbg(qdwc->dev, "failed to get optional sleep clock\n");
+ dev_info(qdwc->dev, "failed to get optional sleep clock\n");
qdwc->sleep_clk = NULL;
}
diff --git a/kernel/drivers/usb/dwc3/dwc3-st.c b/kernel/drivers/usb/dwc3/dwc3-st.c
index 4a1a543de..5c0adb9c6 100644
--- a/kernel/drivers/usb/dwc3/dwc3-st.c
+++ b/kernel/drivers/usb/dwc3/dwc3-st.c
@@ -135,8 +135,6 @@ static int st_dwc3_drd_init(struct st_dwc3 *dwc3_data)
| USB3_SEL_FORCE_DMPULLDOWN2 | USB3_FORCE_DMPULLDOWN2);
val |= USB3_DEVICE_NOT_HOST;
-
- dev_dbg(dwc3_data->dev, "Configuring as Device\n");
break;
case USB_DR_MODE_HOST:
@@ -154,8 +152,6 @@ static int st_dwc3_drd_init(struct st_dwc3 *dwc3_data)
*/
val |= USB3_DELAY_VBUSVALID;
-
- dev_dbg(dwc3_data->dev, "Configuring as Host\n");
break;
default:
@@ -199,6 +195,7 @@ static int st_dwc3_probe(struct platform_device *pdev)
struct resource *res;
struct device *dev = &pdev->dev;
struct device_node *node = dev->of_node, *child;
+ struct platform_device *child_pdev;
struct regmap *regmap;
int ret;
@@ -257,8 +254,6 @@ static int st_dwc3_probe(struct platform_device *pdev)
goto undo_softreset;
}
- dwc3_data->dr_mode = of_usb_get_dr_mode(child);
-
/* Allocate and initialize the core */
ret = of_platform_populate(node, NULL, NULL, dev);
if (ret) {
@@ -266,6 +261,15 @@ static int st_dwc3_probe(struct platform_device *pdev)
goto undo_softreset;
}
+ child_pdev = of_find_device_by_node(child);
+ if (!child_pdev) {
+ dev_err(dev, "failed to find dwc3 core device\n");
+ ret = -ENODEV;
+ goto undo_softreset;
+ }
+
+ dwc3_data->dr_mode = usb_get_dr_mode(&child_pdev->dev);
+
/*
* Configure the USB port as device or host according to the static
* configuration passed from DT.
diff --git a/kernel/drivers/usb/dwc3/ep0.c b/kernel/drivers/usb/dwc3/ep0.c
index 06ecd1e68..b13912d5f 100644
--- a/kernel/drivers/usb/dwc3/ep0.c
+++ b/kernel/drivers/usb/dwc3/ep0.c
@@ -56,7 +56,7 @@ static const char *dwc3_ep0_state_string(enum dwc3_ep0_state state)
}
static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
- u32 len, u32 type)
+ u32 len, u32 type, bool chain)
{
struct dwc3_gadget_ep_cmd_params params;
struct dwc3_trb *trb;
@@ -70,7 +70,10 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
return 0;
}
- trb = dwc->ep0_trb;
+ trb = &dwc->ep0_trb[dep->free_slot];
+
+ if (chain)
+ dep->free_slot++;
trb->bpl = lower_32_bits(buf_dma);
trb->bph = upper_32_bits(buf_dma);
@@ -78,10 +81,17 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
trb->ctrl = type;
trb->ctrl |= (DWC3_TRB_CTRL_HWO
- | DWC3_TRB_CTRL_LST
- | DWC3_TRB_CTRL_IOC
| DWC3_TRB_CTRL_ISP_IMI);
+ if (chain)
+ trb->ctrl |= DWC3_TRB_CTRL_CHN;
+ else
+ trb->ctrl |= (DWC3_TRB_CTRL_IOC
+ | DWC3_TRB_CTRL_LST);
+
+ if (chain)
+ return 0;
+
memset(&params, 0, sizeof(params));
params.param0 = upper_32_bits(dwc->ep0_trb_addr);
params.param1 = lower_32_bits(dwc->ep0_trb_addr);
@@ -302,7 +312,7 @@ void dwc3_ep0_out_start(struct dwc3 *dwc)
int ret;
ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8,
- DWC3_TRBCTL_CONTROL_SETUP);
+ DWC3_TRBCTL_CONTROL_SETUP, false);
WARN_ON(ret < 0);
}
@@ -545,7 +555,6 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
int ret;
u32 reg;
- dwc->start_config_issued = false;
cfg = le16_to_cpu(ctrl->wValue);
switch (state) {
@@ -727,10 +736,6 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ISOCH_DELAY");
ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
break;
- case USB_REQ_SET_INTERFACE:
- dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_INTERFACE");
- dwc->start_config_issued = false;
- /* Fall through */
default:
dwc3_trace(trace_dwc3_ep0, "Forwarding to gadget driver");
ret = dwc3_ep0_delegate_req(dwc, ctrl);
@@ -783,7 +788,11 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
struct usb_request *ur;
struct dwc3_trb *trb;
struct dwc3_ep *ep0;
- u32 transferred;
+ unsigned transfer_size = 0;
+ unsigned maxp;
+ unsigned remaining_ur_length;
+ void *buf;
+ u32 transferred = 0;
u32 status;
u32 length;
u8 epnum;
@@ -812,22 +821,37 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
}
ur = &r->request;
+ buf = ur->buf;
+ remaining_ur_length = ur->length;
length = trb->size & DWC3_TRB_SIZE_MASK;
+ maxp = ep0->endpoint.maxpacket;
+
if (dwc->ep0_bounced) {
- unsigned transfer_size = ur->length;
- unsigned maxp = ep0->endpoint.maxpacket;
+ /*
+ * Handle the first TRB before handling the bounce buffer if
+ * the request length is greater than the bounce buffer size
+ */
+ if (ur->length > DWC3_EP0_BOUNCE_SIZE) {
+ transfer_size = ALIGN(ur->length - maxp, maxp);
+ transferred = transfer_size - length;
+ buf = (u8 *)buf + transferred;
+ ur->actual += transferred;
+ remaining_ur_length -= transferred;
- transfer_size += (maxp - (transfer_size % maxp));
+ trb++;
+ length = trb->size & DWC3_TRB_SIZE_MASK;
+
+ ep0->free_slot = 0;
+ }
- /* Maximum of DWC3_EP0_BOUNCE_SIZE can only be received */
- if (transfer_size > DWC3_EP0_BOUNCE_SIZE)
- transfer_size = DWC3_EP0_BOUNCE_SIZE;
+ transfer_size = roundup((ur->length - transfer_size),
+ maxp);
- transferred = min_t(u32, ur->length,
- transfer_size - length);
- memcpy(ur->buf, dwc->ep0_bounce, transferred);
+ transferred = min_t(u32, remaining_ur_length,
+ transfer_size - length);
+ memcpy(buf, dwc->ep0_bounce, transferred);
} else {
transferred = ur->length - length;
}
@@ -849,7 +873,7 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
ret = dwc3_ep0_start_trans(dwc, epnum,
dwc->ctrl_req_addr, 0,
- DWC3_TRBCTL_CONTROL_DATA);
+ DWC3_TRBCTL_CONTROL_DATA, false);
WARN_ON(ret < 0);
}
}
@@ -933,10 +957,10 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
if (req->request.length == 0) {
ret = dwc3_ep0_start_trans(dwc, dep->number,
dwc->ctrl_req_addr, 0,
- DWC3_TRBCTL_CONTROL_DATA);
+ DWC3_TRBCTL_CONTROL_DATA, false);
} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
&& (dep->number == 0)) {
- u32 transfer_size;
+ u32 transfer_size = 0;
u32 maxpacket;
ret = usb_gadget_map_request(&dwc->gadget, &req->request,
@@ -947,23 +971,25 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
}
maxpacket = dep->endpoint.maxpacket;
- transfer_size = roundup(req->request.length, maxpacket);
- if (transfer_size > DWC3_EP0_BOUNCE_SIZE) {
- dev_WARN(dwc->dev, "bounce buf can't handle req len\n");
- transfer_size = DWC3_EP0_BOUNCE_SIZE;
+ if (req->request.length > DWC3_EP0_BOUNCE_SIZE) {
+ transfer_size = ALIGN(req->request.length - maxpacket,
+ maxpacket);
+ ret = dwc3_ep0_start_trans(dwc, dep->number,
+ req->request.dma,
+ transfer_size,
+ DWC3_TRBCTL_CONTROL_DATA,
+ true);
}
+ transfer_size = roundup((req->request.length - transfer_size),
+ maxpacket);
+
dwc->ep0_bounced = true;
- /*
- * REVISIT in case request length is bigger than
- * DWC3_EP0_BOUNCE_SIZE we will need two chained
- * TRBs to handle the transfer.
- */
ret = dwc3_ep0_start_trans(dwc, dep->number,
dwc->ep0_bounce_addr, transfer_size,
- DWC3_TRBCTL_CONTROL_DATA);
+ DWC3_TRBCTL_CONTROL_DATA, false);
} else {
ret = usb_gadget_map_request(&dwc->gadget, &req->request,
dep->number);
@@ -973,7 +999,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
}
ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma,
- req->request.length, DWC3_TRBCTL_CONTROL_DATA);
+ req->request.length, DWC3_TRBCTL_CONTROL_DATA,
+ false);
}
WARN_ON(ret < 0);
@@ -988,7 +1015,7 @@ static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
: DWC3_TRBCTL_CONTROL_STATUS2;
return dwc3_ep0_start_trans(dwc, dep->number,
- dwc->ctrl_req_addr, 0, type);
+ dwc->ctrl_req_addr, 0, type, false);
}
static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)
diff --git a/kernel/drivers/usb/dwc3/gadget.c b/kernel/drivers/usb/dwc3/gadget.c
index 333a7c007..69ffe6e8d 100644
--- a/kernel/drivers/usb/dwc3/gadget.c
+++ b/kernel/drivers/usb/dwc3/gadget.c
@@ -388,24 +388,66 @@ static void dwc3_free_trb_pool(struct dwc3_ep *dep)
dep->trb_pool_dma = 0;
}
+static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep);
+
+/**
+ * dwc3_gadget_start_config - Configure EP resources
+ * @dwc: pointer to our controller context structure
+ * @dep: endpoint that is being enabled
+ *
+ * The assignment of transfer resources cannot perfectly follow the
+ * data book due to the fact that the controller driver does not have
+ * all knowledge of the configuration in advance. It is given this
+ * information piecemeal by the composite gadget framework after every
+ * SET_CONFIGURATION and SET_INTERFACE. Trying to follow the databook
+ * programming model in this scenario can cause errors. For two
+ * reasons:
+ *
+ * 1) The databook says to do DEPSTARTCFG for every SET_CONFIGURATION
+ * and SET_INTERFACE (8.1.5). This is incorrect in the scenario of
+ * multiple interfaces.
+ *
+ * 2) The databook does not mention doing more DEPXFERCFG for new
+ * endpoint on alt setting (8.1.6).
+ *
+ * The following simplified method is used instead:
+ *
+ * All hardware endpoints can be assigned a transfer resource and this
+ * setting will stay persistent until either a core reset or
+ * hibernation. So whenever we do a DEPSTARTCFG(0) we can go ahead and
+ * do DEPXFERCFG for every hardware endpoint as well. We are
+ * guaranteed that there are as many transfer resources as endpoints.
+ *
+ * This function is called for each endpoint when it is being enabled
+ * but is triggered only when called for EP0-out, which always happens
+ * first, and which should only happen in one of the above conditions.
+ */
static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep)
{
struct dwc3_gadget_ep_cmd_params params;
u32 cmd;
+ int i;
+ int ret;
+
+ if (dep->number)
+ return 0;
memset(&params, 0x00, sizeof(params));
+ cmd = DWC3_DEPCMD_DEPSTARTCFG;
- if (dep->number != 1) {
- cmd = DWC3_DEPCMD_DEPSTARTCFG;
- /* XferRscIdx == 0 for ep0 and 2 for the remaining */
- if (dep->number > 1) {
- if (dwc->start_config_issued)
- return 0;
- dwc->start_config_issued = true;
- cmd |= DWC3_DEPCMD_PARAM(2);
- }
+ ret = dwc3_send_gadget_ep_cmd(dwc, 0, cmd, &params);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) {
+ struct dwc3_ep *dep = dwc->eps[i];
- return dwc3_send_gadget_ep_cmd(dwc, 0, cmd, &params);
+ if (!dep)
+ continue;
+
+ ret = dwc3_gadget_set_xfer_resource(dwc, dep);
+ if (ret)
+ return ret;
}
return 0;
@@ -519,10 +561,6 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
struct dwc3_trb *trb_st_hw;
struct dwc3_trb *trb_link;
- ret = dwc3_gadget_set_xfer_resource(dwc, dep);
- if (ret)
- return ret;
-
dep->endpoint.desc = desc;
dep->comp_desc = comp_desc;
dep->type = usb_endpoint_type(desc);
@@ -547,6 +585,23 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
trb_link->ctrl |= DWC3_TRB_CTRL_HWO;
}
+ switch (usb_endpoint_type(desc)) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ strlcat(dep->name, "-control", sizeof(dep->name));
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ strlcat(dep->name, "-isoc", sizeof(dep->name));
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ strlcat(dep->name, "-bulk", sizeof(dep->name));
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ strlcat(dep->name, "-int", sizeof(dep->name));
+ break;
+ default:
+ dev_err(dwc->dev, "invalid endpoint transfer type\n");
+ }
+
return 0;
}
@@ -586,6 +641,8 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
struct dwc3 *dwc = dep->dwc;
u32 reg;
+ dwc3_trace(trace_dwc3_gadget, "Disabling %s", dep->name);
+
dwc3_remove_requests(dwc, dep);
/* make sure HW endpoint isn't stalled */
@@ -602,6 +659,10 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
dep->type = 0;
dep->flags = 0;
+ snprintf(dep->name, sizeof(dep->name), "ep%d%s",
+ dep->number >> 1,
+ (dep->number & 1) ? "in" : "out");
+
return 0;
}
@@ -647,23 +708,6 @@ static int dwc3_gadget_ep_enable(struct usb_ep *ep,
return 0;
}
- switch (usb_endpoint_type(desc)) {
- case USB_ENDPOINT_XFER_CONTROL:
- strlcat(dep->name, "-control", sizeof(dep->name));
- break;
- case USB_ENDPOINT_XFER_ISOC:
- strlcat(dep->name, "-isoc", sizeof(dep->name));
- break;
- case USB_ENDPOINT_XFER_BULK:
- strlcat(dep->name, "-bulk", sizeof(dep->name));
- break;
- case USB_ENDPOINT_XFER_INT:
- strlcat(dep->name, "-int", sizeof(dep->name));
- break;
- default:
- dev_err(dwc->dev, "invalid endpoint transfer type\n");
- }
-
spin_lock_irqsave(&dwc->lock, flags);
ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc, false, false);
spin_unlock_irqrestore(&dwc->lock, flags);
@@ -692,10 +736,6 @@ static int dwc3_gadget_ep_disable(struct usb_ep *ep)
return 0;
}
- snprintf(dep->name, sizeof(dep->name), "ep%d%s",
- dep->number >> 1,
- (dep->number & 1) ? "in" : "out");
-
spin_lock_irqsave(&dwc->lock, flags);
ret = __dwc3_gadget_ep_disable(dep);
spin_unlock_irqrestore(&dwc->lock, flags);
@@ -946,7 +986,6 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
dwc3_trace(trace_dwc3_gadget, "%s: endpoint busy", dep->name);
return -EBUSY;
}
- dep->flags &= ~DWC3_EP_PENDING_REQUEST;
/*
* If we are getting here after a short-out-packet we don't enqueue any
@@ -1048,6 +1087,8 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
req->direction = dep->direction;
req->epnum = dep->number;
+ trace_dwc3_ep_queue(req);
+
/*
* We only add to our list of requests now and
* start consuming the list once we get XferNotReady
@@ -1068,6 +1109,20 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
list_add_tail(&req->list, &dep->request_list);
/*
+ * If there are no pending requests and the endpoint isn't already
+ * busy, we will just start the request straight away.
+ *
+ * This will save one IRQ (XFER_NOT_READY) and possibly make it a
+ * little bit faster.
+ */
+ if (!usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
+ !usb_endpoint_xfer_int(dep->endpoint.desc) &&
+ !(dep->flags & DWC3_EP_BUSY)) {
+ ret = __dwc3_gadget_kick_transfer(dep, 0, true);
+ goto out;
+ }
+
+ /*
* There are a few special cases:
*
* 1. XferNotReady with empty list of requests. We need to kick the
@@ -1094,10 +1149,10 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
}
ret = __dwc3_gadget_kick_transfer(dep, 0, true);
- if (ret && ret != -EBUSY)
- dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
- dep->name);
- return ret;
+ if (!ret)
+ dep->flags &= ~DWC3_EP_PENDING_REQUEST;
+
+ goto out;
}
/*
@@ -1111,10 +1166,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
WARN_ON_ONCE(!dep->resource_index);
ret = __dwc3_gadget_kick_transfer(dep, dep->resource_index,
false);
- if (ret && ret != -EBUSY)
- dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
- dep->name);
- return ret;
+ goto out;
}
/*
@@ -1122,14 +1174,17 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
* right away, otherwise host will not know we have streams to be
* handled.
*/
- if (dep->stream_capable) {
+ if (dep->stream_capable)
ret = __dwc3_gadget_kick_transfer(dep, 0, true);
- if (ret && ret != -EBUSY)
- dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
- dep->name);
- }
- return 0;
+out:
+ if (ret && ret != -EBUSY)
+ dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
+ dep->name);
+ if (ret == -EBUSY)
+ ret = 0;
+
+ return ret;
}
static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
@@ -1157,8 +1212,6 @@ static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
goto out;
}
- trace_dwc3_ep_queue(req);
-
ret = __dwc3_gadget_ep_queue(dep, req);
out:
@@ -1589,8 +1642,6 @@ static int dwc3_gadget_start(struct usb_gadget *g,
}
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
- dwc->start_config_issued = false;
-
/* Start with SuperSpeed Default */
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
@@ -1713,6 +1764,17 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
return ret;
}
+ if (epnum == 0 || epnum == 1) {
+ dep->endpoint.caps.type_control = true;
+ } else {
+ dep->endpoint.caps.type_iso = true;
+ dep->endpoint.caps.type_bulk = true;
+ dep->endpoint.caps.type_int = true;
+ }
+
+ dep->endpoint.caps.dir_in = !!direction;
+ dep->endpoint.caps.dir_out = !direction;
+
INIT_LIST_HEAD(&dep->request_list);
INIT_LIST_HEAD(&dep->req_queued);
}
@@ -1859,27 +1921,32 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
unsigned int i;
int ret;
- req = next_request(&dep->req_queued);
- if (!req) {
- WARN_ON_ONCE(1);
- return 1;
- }
- i = 0;
do {
- slot = req->start_slot + i;
- if ((slot == DWC3_TRB_NUM - 1) &&
+ req = next_request(&dep->req_queued);
+ if (!req) {
+ WARN_ON_ONCE(1);
+ return 1;
+ }
+ i = 0;
+ do {
+ slot = req->start_slot + i;
+ if ((slot == DWC3_TRB_NUM - 1) &&
usb_endpoint_xfer_isoc(dep->endpoint.desc))
- slot++;
- slot %= DWC3_TRB_NUM;
- trb = &dep->trb_pool[slot];
+ slot++;
+ slot %= DWC3_TRB_NUM;
+ trb = &dep->trb_pool[slot];
+
+ ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
+ event, status);
+ if (ret)
+ break;
+ } while (++i < req->request.num_mapped_sgs);
+
+ dwc3_gadget_giveback(dep, req, status);
- ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
- event, status);
if (ret)
break;
- } while (++i < req->request.num_mapped_sgs);
-
- dwc3_gadget_giveback(dep, req, status);
+ } while (1);
if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
list_empty(&dep->req_queued)) {
@@ -1942,6 +2009,14 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
dwc->u1u2 = 0;
}
+
+ if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
+ int ret;
+
+ ret = __dwc3_gadget_kick_transfer(dep, 0, is_xfer_complete);
+ if (!ret || ret == -EBUSY)
+ return;
+ }
}
static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
@@ -1979,15 +2054,16 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
dwc3_gadget_start_isoc(dwc, dep, event);
} else {
+ int active;
int ret;
+ active = event->status & DEPEVT_STATUS_TRANSFER_ACTIVE;
+
dwc3_trace(trace_dwc3_gadget, "%s: reason %s",
- dep->name, event->status &
- DEPEVT_STATUS_TRANSFER_ACTIVE
- ? "Transfer Active"
+ dep->name, active ? "Transfer Active"
: "Transfer Not Active");
- ret = __dwc3_gadget_kick_transfer(dep, 0, 1);
+ ret = __dwc3_gadget_kick_transfer(dep, 0, !active);
if (!ret || ret == -EBUSY)
return;
@@ -2162,7 +2238,6 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
dwc3_disconnect_gadget(dwc);
- dwc->start_config_issued = false;
dwc->gadget.speed = USB_SPEED_UNKNOWN;
dwc->setup_packet_pending = false;
@@ -2213,7 +2288,6 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
dwc3_stop_active_transfers(dwc);
dwc3_clear_stall_all_ep(dwc);
- dwc->start_config_issued = false;
/* Reset device address to zero */
reg = dwc3_readl(dwc->regs, DWC3_DCFG);
@@ -2652,8 +2726,6 @@ static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
int i;
irqreturn_t ret = IRQ_NONE;
- spin_lock(&dwc->lock);
-
for (i = 0; i < dwc->num_event_buffers; i++) {
irqreturn_t status;
@@ -2662,8 +2734,6 @@ static irqreturn_t dwc3_interrupt(int irq, void *_dwc)
ret = status;
}
- spin_unlock(&dwc->lock);
-
return ret;
}
@@ -2685,7 +2755,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
goto err0;
}
- dwc->ep0_trb = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
+ dwc->ep0_trb = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ep0_trb) * 2,
&dwc->ep0_trb_addr, GFP_KERNEL);
if (!dwc->ep0_trb) {
dev_err(dwc->dev, "failed to allocate ep0 trb\n");
@@ -2709,12 +2779,34 @@ int dwc3_gadget_init(struct dwc3 *dwc)
}
dwc->gadget.ops = &dwc3_gadget_ops;
- dwc->gadget.max_speed = USB_SPEED_SUPER;
dwc->gadget.speed = USB_SPEED_UNKNOWN;
dwc->gadget.sg_supported = true;
dwc->gadget.name = "dwc3-gadget";
/*
+ * FIXME We might be setting max_speed to <SUPER, however versions
+ * <2.20a of dwc3 have an issue with metastability (documented
+ * elsewhere in this driver) which tells us we can't set max speed to
+ * anything lower than SUPER.
+ *
+ * Because gadget.max_speed is only used by composite.c and function
+ * drivers (i.e. it won't go into dwc3's registers) we are allowing this
+ * to happen so we avoid sending SuperSpeed Capability descriptor
+ * together with our BOS descriptor as that could confuse host into
+ * thinking we can handle super speed.
+ *
+ * Note that, in fact, we won't even support GetBOS requests when speed
+ * is less than super speed because we don't have means, yet, to tell
+ * composite.c that we are USB 2.0 + LPM ECN.
+ */
+ if (dwc->revision < DWC3_REVISION_220A)
+ dwc3_trace(trace_dwc3_gadget,
+ "Changing max_speed on rev %08x\n",
+ dwc->revision);
+
+ dwc->gadget.max_speed = dwc->maximum_speed;
+
+ /*
* Per databook, DWC3 needs buffer size to be aligned to MaxPacketSize
* on ep out.
*/
diff --git a/kernel/drivers/usb/dwc3/platform_data.h b/kernel/drivers/usb/dwc3/platform_data.h
index a2bd464be..2bb4d3ad0 100644
--- a/kernel/drivers/usb/dwc3/platform_data.h
+++ b/kernel/drivers/usb/dwc3/platform_data.h
@@ -42,7 +42,12 @@ struct dwc3_platform_data {
unsigned rx_detect_poll_quirk:1;
unsigned dis_u3_susphy_quirk:1;
unsigned dis_u2_susphy_quirk:1;
+ unsigned dis_enblslpm_quirk:1;
unsigned tx_de_emphasis_quirk:1;
unsigned tx_de_emphasis:2;
+
+ u32 fladj_value;
+
+ const char *hsphy_interface;
};
diff --git a/kernel/drivers/usb/dwc3/ulpi.c b/kernel/drivers/usb/dwc3/ulpi.c
new file mode 100644
index 000000000..ec004c6d7
--- /dev/null
+++ b/kernel/drivers/usb/dwc3/ulpi.c
@@ -0,0 +1,91 @@
+/**
+ * ulpi.c - DesignWare USB3 Controller's ULPI PHY interface
+ *
+ * Copyright (C) 2015 Intel Corporation
+ *
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/ulpi/regs.h>
+
+#include "core.h"
+#include "io.h"
+
+#define DWC3_ULPI_ADDR(a) \
+ ((a >= ULPI_EXT_VENDOR_SPECIFIC) ? \
+ DWC3_GUSB2PHYACC_ADDR(ULPI_ACCESS_EXTENDED) | \
+ DWC3_GUSB2PHYACC_EXTEND_ADDR(a) : DWC3_GUSB2PHYACC_ADDR(a))
+
+static int dwc3_ulpi_busyloop(struct dwc3 *dwc)
+{
+ unsigned count = 1000;
+ u32 reg;
+
+ while (count--) {
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYACC(0));
+ if (!(reg & DWC3_GUSB2PHYACC_BUSY))
+ return 0;
+ cpu_relax();
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int dwc3_ulpi_read(struct ulpi_ops *ops, u8 addr)
+{
+ struct dwc3 *dwc = dev_get_drvdata(ops->dev);
+ u32 reg;
+ int ret;
+
+ reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr);
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg);
+
+ ret = dwc3_ulpi_busyloop(dwc);
+ if (ret)
+ return ret;
+
+ reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYACC(0));
+
+ return DWC3_GUSB2PHYACC_DATA(reg);
+}
+
+static int dwc3_ulpi_write(struct ulpi_ops *ops, u8 addr, u8 val)
+{
+ struct dwc3 *dwc = dev_get_drvdata(ops->dev);
+ u32 reg;
+
+ reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr);
+ reg |= DWC3_GUSB2PHYACC_WRITE | val;
+ dwc3_writel(dwc->regs, DWC3_GUSB2PHYACC(0), reg);
+
+ return dwc3_ulpi_busyloop(dwc);
+}
+
+static struct ulpi_ops dwc3_ulpi_ops = {
+ .read = dwc3_ulpi_read,
+ .write = dwc3_ulpi_write,
+};
+
+int dwc3_ulpi_init(struct dwc3 *dwc)
+{
+ /* Register the interface */
+ dwc->ulpi = ulpi_register_interface(dwc->dev, &dwc3_ulpi_ops);
+ if (IS_ERR(dwc->ulpi)) {
+ dev_err(dwc->dev, "failed to register ULPI interface");
+ return PTR_ERR(dwc->ulpi);
+ }
+
+ return 0;
+}
+
+void dwc3_ulpi_exit(struct dwc3 *dwc)
+{
+ if (dwc->ulpi) {
+ ulpi_unregister_interface(dwc->ulpi);
+ dwc->ulpi = NULL;
+ }
+}