diff options
Diffstat (limited to 'kernel/drivers/usb/dwc2')
| -rw-r--r-- | kernel/drivers/usb/dwc2/Kconfig | 100 | ||||
| -rw-r--r-- | kernel/drivers/usb/dwc2/Makefile | 26 | ||||
| -rw-r--r-- | kernel/drivers/usb/dwc2/core.c | 2860 | ||||
| -rw-r--r-- | kernel/drivers/usb/dwc2/core.h | 1039 | ||||
| -rw-r--r-- | kernel/drivers/usb/dwc2/core_intr.c | 525 | ||||
| -rw-r--r-- | kernel/drivers/usb/dwc2/gadget.c | 4127 | ||||
| -rw-r--r-- | kernel/drivers/usb/dwc2/hcd.c | 3013 | ||||
| -rw-r--r-- | kernel/drivers/usb/dwc2/hcd.h | 761 | ||||
| -rw-r--r-- | kernel/drivers/usb/dwc2/hcd_ddma.c | 1212 | ||||
| -rw-r--r-- | kernel/drivers/usb/dwc2/hcd_intr.c | 2109 | ||||
| -rw-r--r-- | kernel/drivers/usb/dwc2/hcd_queue.c | 827 | ||||
| -rw-r--r-- | kernel/drivers/usb/dwc2/hw.h | 813 | ||||
| -rw-r--r-- | kernel/drivers/usb/dwc2/pci.c | 169 | ||||
| -rw-r--r-- | kernel/drivers/usb/dwc2/platform.c | 312 |
14 files changed, 17893 insertions, 0 deletions
diff --git a/kernel/drivers/usb/dwc2/Kconfig b/kernel/drivers/usb/dwc2/Kconfig new file mode 100644 index 000000000..1bcb36ae6 --- /dev/null +++ b/kernel/drivers/usb/dwc2/Kconfig @@ -0,0 +1,100 @@ +config USB_DWC2 + tristate "DesignWare USB2 DRD Core Support" + depends on USB || USB_GADGET + help + Say Y here if your system has a Dual Role Hi-Speed USB + controller based on the DesignWare HSOTG IP Core. + + For host mode, if you choose to build the driver as dynamically + linked modules, the core module will be called dwc2.ko, the PCI + bus interface module (if you have a PCI bus system) will be + called dwc2_pci.ko, and the platform interface module (for + controllers directly connected to the CPU) will be called + dwc2_platform.ko. For all modes(host, gadget and dual-role), there + will be an additional module named dwc2.ko. + +if USB_DWC2 + +choice + bool "DWC2 Mode Selection" + default USB_DWC2_DUAL_ROLE if (USB && USB_GADGET) + default USB_DWC2_HOST if (USB && !USB_GADGET) + default USB_DWC2_PERIPHERAL if (!USB && USB_GADGET) + +config USB_DWC2_HOST + bool "Host only mode" + depends on USB=y || (USB_DWC2=m && USB) + help + The Designware USB2.0 high-speed host controller + integrated into many SoCs. Select this option if you want the + driver to operate in Host-only mode. + +comment "Gadget/Dual-role mode requires USB Gadget support to be enabled" + +config USB_DWC2_PERIPHERAL + bool "Gadget only mode" + depends on USB_GADGET=y || USB_GADGET=USB_DWC2 + help + The Designware USB2.0 high-speed gadget controller + integrated into many SoCs. Select this option if you want the + driver to operate in Peripheral-only mode. This option requires + USB_GADGET to be enabled. + +config USB_DWC2_DUAL_ROLE + bool "Dual Role mode" + depends on (USB=y && USB_GADGET=y) || (USB_DWC2=m && USB && USB_GADGET) + help + Select this option if you want the driver to work in a dual-role + mode. In this mode both host and gadget features are enabled, and + the role will be determined by the cable that gets plugged-in. This + option requires USB_GADGET to be enabled. +endchoice + +config USB_DWC2_PLATFORM + tristate "DWC2 Platform" + default USB_DWC2_HOST || USB_DWC2_PERIPHERAL + help + The Designware USB2.0 platform interface module for + controllers directly connected to the CPU. + +config USB_DWC2_PCI + tristate "DWC2 PCI" + depends on PCI + default n + select USB_DWC2_PLATFORM + select NOP_USB_XCEIV + help + The Designware USB2.0 PCI interface module for controllers + connected to a PCI bus. + +config USB_DWC2_DEBUG + bool "Enable Debugging Messages" + help + Say Y here to enable debugging messages in the DWC2 Driver. + +config USB_DWC2_VERBOSE + bool "Enable Verbose Debugging Messages" + depends on USB_DWC2_DEBUG + help + Say Y here to enable verbose debugging messages in the DWC2 Driver. + WARNING: Enabling this will quickly fill your message log. + If in doubt, say N. + +config USB_DWC2_TRACK_MISSED_SOFS + bool "Enable Missed SOF Tracking" + help + Say Y here to enable logging of missed SOF events to the dmesg log. + WARNING: This feature is still experimental. + If in doubt, say N. + +config USB_DWC2_DEBUG_PERIODIC + bool "Enable Debugging Messages For Periodic Transfers" + depends on USB_DWC2_DEBUG || USB_DWC2_VERBOSE + default y + help + Say N here to disable (verbose) debugging messages to be + logged for periodic transfers. This allows better debugging of + non-periodic transfers, but of course the debug logs will be + incomplete. Note that this also disables some debug messages + for which the transfer type cannot be deduced. +endif diff --git a/kernel/drivers/usb/dwc2/Makefile b/kernel/drivers/usb/dwc2/Makefile new file mode 100644 index 000000000..f07b425ea --- /dev/null +++ b/kernel/drivers/usb/dwc2/Makefile @@ -0,0 +1,26 @@ +ccflags-$(CONFIG_USB_DWC2_DEBUG) += -DDEBUG +ccflags-$(CONFIG_USB_DWC2_VERBOSE) += -DVERBOSE_DEBUG + +obj-$(CONFIG_USB_DWC2) += dwc2.o +dwc2-y := core.o core_intr.o + +ifneq ($(filter y,$(CONFIG_USB_DWC2_HOST) $(CONFIG_USB_DWC2_DUAL_ROLE)),) + dwc2-y += hcd.o hcd_intr.o + dwc2-y += hcd_queue.o hcd_ddma.o +endif + +ifneq ($(filter y,$(CONFIG_USB_DWC2_PERIPHERAL) $(CONFIG_USB_DWC2_DUAL_ROLE)),) + dwc2-y += gadget.o +endif + +# NOTE: The previous s3c-hsotg peripheral mode only driver has been moved to +# this location and renamed gadget.c. When building for dynamically linked +# modules, dwc2.ko will get built for host mode, peripheral mode, and dual-role +# mode. The PCI bus interface module will called dwc2_pci.ko and the platform +# interface module will be called dwc2_platform.ko. + +obj-$(CONFIG_USB_DWC2_PCI) += dwc2_pci.o +dwc2_pci-y := pci.o + +obj-$(CONFIG_USB_DWC2_PLATFORM) += dwc2_platform.o +dwc2_platform-y := platform.o diff --git a/kernel/drivers/usb/dwc2/core.c b/kernel/drivers/usb/dwc2/core.c new file mode 100644 index 000000000..d5197d492 --- /dev/null +++ b/kernel/drivers/usb/dwc2/core.c @@ -0,0 +1,2860 @@ +/* + * core.c - DesignWare HS OTG Controller common routines + * + * Copyright (C) 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * The Core code provides basic services for accessing and managing the + * DWC_otg hardware. These services are used by both the Host Controller + * Driver and the Peripheral Controller Driver. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/usb.h> + +#include <linux/usb/hcd.h> +#include <linux/usb/ch11.h> + +#include "core.h" +#include "hcd.h" + +/** + * dwc2_enable_common_interrupts() - Initializes the commmon interrupts, + * used in both device and host modes + * + * @hsotg: Programming view of the DWC_otg controller + */ +static void dwc2_enable_common_interrupts(struct dwc2_hsotg *hsotg) +{ + u32 intmsk; + + /* Clear any pending OTG Interrupts */ + writel(0xffffffff, hsotg->regs + GOTGINT); + + /* Clear any pending interrupts */ + writel(0xffffffff, hsotg->regs + GINTSTS); + + /* Enable the interrupts in the GINTMSK */ + intmsk = GINTSTS_MODEMIS | GINTSTS_OTGINT; + + if (hsotg->core_params->dma_enable <= 0) + intmsk |= GINTSTS_RXFLVL; + + intmsk |= GINTSTS_CONIDSTSCHNG | GINTSTS_WKUPINT | GINTSTS_USBSUSP | + GINTSTS_SESSREQINT; + + writel(intmsk, hsotg->regs + GINTMSK); +} + +/* + * Initializes the FSLSPClkSel field of the HCFG register depending on the + * PHY type + */ +static void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg) +{ + u32 hcfg, val; + + if ((hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI && + hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED && + hsotg->core_params->ulpi_fs_ls > 0) || + hsotg->core_params->phy_type == DWC2_PHY_TYPE_PARAM_FS) { + /* Full speed PHY */ + val = HCFG_FSLSPCLKSEL_48_MHZ; + } else { + /* High speed PHY running at full speed or high speed */ + val = HCFG_FSLSPCLKSEL_30_60_MHZ; + } + + dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val); + hcfg = readl(hsotg->regs + HCFG); + hcfg &= ~HCFG_FSLSPCLKSEL_MASK; + hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT; + writel(hcfg, hsotg->regs + HCFG); +} + +/* + * Do core a soft reset of the core. Be careful with this because it + * resets all the internal state machines of the core. + */ +static int dwc2_core_reset(struct dwc2_hsotg *hsotg) +{ + u32 greset; + int count = 0; + u32 gusbcfg; + + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + /* Wait for AHB master IDLE state */ + do { + usleep_range(20000, 40000); + greset = readl(hsotg->regs + GRSTCTL); + if (++count > 50) { + dev_warn(hsotg->dev, + "%s() HANG! AHB Idle GRSTCTL=%0x\n", + __func__, greset); + return -EBUSY; + } + } while (!(greset & GRSTCTL_AHBIDLE)); + + /* Core Soft Reset */ + count = 0; + greset |= GRSTCTL_CSFTRST; + writel(greset, hsotg->regs + GRSTCTL); + do { + usleep_range(20000, 40000); + greset = readl(hsotg->regs + GRSTCTL); + if (++count > 50) { + dev_warn(hsotg->dev, + "%s() HANG! Soft Reset GRSTCTL=%0x\n", + __func__, greset); + return -EBUSY; + } + } while (greset & GRSTCTL_CSFTRST); + + if (hsotg->dr_mode == USB_DR_MODE_HOST) { + gusbcfg = readl(hsotg->regs + GUSBCFG); + gusbcfg &= ~GUSBCFG_FORCEDEVMODE; + gusbcfg |= GUSBCFG_FORCEHOSTMODE; + writel(gusbcfg, hsotg->regs + GUSBCFG); + } else if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) { + gusbcfg = readl(hsotg->regs + GUSBCFG); + gusbcfg &= ~GUSBCFG_FORCEHOSTMODE; + gusbcfg |= GUSBCFG_FORCEDEVMODE; + writel(gusbcfg, hsotg->regs + GUSBCFG); + } else if (hsotg->dr_mode == USB_DR_MODE_OTG) { + gusbcfg = readl(hsotg->regs + GUSBCFG); + gusbcfg &= ~GUSBCFG_FORCEHOSTMODE; + gusbcfg &= ~GUSBCFG_FORCEDEVMODE; + writel(gusbcfg, hsotg->regs + GUSBCFG); + } + + /* + * NOTE: This long sleep is _very_ important, otherwise the core will + * not stay in host mode after a connector ID change! + */ + usleep_range(150000, 200000); + + return 0; +} + +static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) +{ + u32 usbcfg, i2cctl; + int retval = 0; + + /* + * core_init() is now called on every switch so only call the + * following for the first time through + */ + if (select_phy) { + dev_dbg(hsotg->dev, "FS PHY selected\n"); + usbcfg = readl(hsotg->regs + GUSBCFG); + usbcfg |= GUSBCFG_PHYSEL; + writel(usbcfg, hsotg->regs + GUSBCFG); + + /* Reset after a PHY select */ + retval = dwc2_core_reset(hsotg); + if (retval) { + dev_err(hsotg->dev, "%s() Reset failed, aborting", + __func__); + return retval; + } + } + + /* + * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also + * do this on HNP Dev/Host mode switches (done in dev_init and + * host_init). + */ + if (dwc2_is_host_mode(hsotg)) + dwc2_init_fs_ls_pclk_sel(hsotg); + + if (hsotg->core_params->i2c_enable > 0) { + dev_dbg(hsotg->dev, "FS PHY enabling I2C\n"); + + /* Program GUSBCFG.OtgUtmiFsSel to I2C */ + usbcfg = readl(hsotg->regs + GUSBCFG); + usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL; + writel(usbcfg, hsotg->regs + GUSBCFG); + + /* Program GI2CCTL.I2CEn */ + i2cctl = readl(hsotg->regs + GI2CCTL); + i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK; + i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT; + i2cctl &= ~GI2CCTL_I2CEN; + writel(i2cctl, hsotg->regs + GI2CCTL); + i2cctl |= GI2CCTL_I2CEN; + writel(i2cctl, hsotg->regs + GI2CCTL); + } + + return retval; +} + +static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) +{ + u32 usbcfg; + int retval = 0; + + if (!select_phy) + return 0; + + usbcfg = readl(hsotg->regs + GUSBCFG); + + /* + * HS PHY parameters. These parameters are preserved during soft reset + * so only program the first time. Do a soft reset immediately after + * setting phyif. + */ + switch (hsotg->core_params->phy_type) { + case DWC2_PHY_TYPE_PARAM_ULPI: + /* ULPI interface */ + dev_dbg(hsotg->dev, "HS ULPI PHY selected\n"); + usbcfg |= GUSBCFG_ULPI_UTMI_SEL; + usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL); + if (hsotg->core_params->phy_ulpi_ddr > 0) + usbcfg |= GUSBCFG_DDRSEL; + break; + case DWC2_PHY_TYPE_PARAM_UTMI: + /* UTMI+ interface */ + dev_dbg(hsotg->dev, "HS UTMI+ PHY selected\n"); + usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16); + if (hsotg->core_params->phy_utmi_width == 16) + usbcfg |= GUSBCFG_PHYIF16; + break; + default: + dev_err(hsotg->dev, "FS PHY selected at HS!\n"); + break; + } + + writel(usbcfg, hsotg->regs + GUSBCFG); + + /* Reset after setting the PHY parameters */ + retval = dwc2_core_reset(hsotg); + if (retval) { + dev_err(hsotg->dev, "%s() Reset failed, aborting", + __func__); + return retval; + } + + return retval; +} + +static int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) +{ + u32 usbcfg; + int retval = 0; + + if (hsotg->core_params->speed == DWC2_SPEED_PARAM_FULL && + hsotg->core_params->phy_type == DWC2_PHY_TYPE_PARAM_FS) { + /* If FS mode with FS PHY */ + retval = dwc2_fs_phy_init(hsotg, select_phy); + if (retval) + return retval; + } else { + /* High speed PHY */ + retval = dwc2_hs_phy_init(hsotg, select_phy); + if (retval) + return retval; + } + + if (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI && + hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED && + hsotg->core_params->ulpi_fs_ls > 0) { + dev_dbg(hsotg->dev, "Setting ULPI FSLS\n"); + usbcfg = readl(hsotg->regs + GUSBCFG); + usbcfg |= GUSBCFG_ULPI_FS_LS; + usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M; + writel(usbcfg, hsotg->regs + GUSBCFG); + } else { + usbcfg = readl(hsotg->regs + GUSBCFG); + usbcfg &= ~GUSBCFG_ULPI_FS_LS; + usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M; + writel(usbcfg, hsotg->regs + GUSBCFG); + } + + return retval; +} + +static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg) +{ + u32 ahbcfg = readl(hsotg->regs + GAHBCFG); + + switch (hsotg->hw_params.arch) { + case GHWCFG2_EXT_DMA_ARCH: + dev_err(hsotg->dev, "External DMA Mode not supported\n"); + return -EINVAL; + + case GHWCFG2_INT_DMA_ARCH: + dev_dbg(hsotg->dev, "Internal DMA Mode\n"); + if (hsotg->core_params->ahbcfg != -1) { + ahbcfg &= GAHBCFG_CTRL_MASK; + ahbcfg |= hsotg->core_params->ahbcfg & + ~GAHBCFG_CTRL_MASK; + } + break; + + case GHWCFG2_SLAVE_ONLY_ARCH: + default: + dev_dbg(hsotg->dev, "Slave Only Mode\n"); + break; + } + + dev_dbg(hsotg->dev, "dma_enable:%d dma_desc_enable:%d\n", + hsotg->core_params->dma_enable, + hsotg->core_params->dma_desc_enable); + + if (hsotg->core_params->dma_enable > 0) { + if (hsotg->core_params->dma_desc_enable > 0) + dev_dbg(hsotg->dev, "Using Descriptor DMA mode\n"); + else + dev_dbg(hsotg->dev, "Using Buffer DMA mode\n"); + } else { + dev_dbg(hsotg->dev, "Using Slave mode\n"); + hsotg->core_params->dma_desc_enable = 0; + } + + if (hsotg->core_params->dma_enable > 0) + ahbcfg |= GAHBCFG_DMA_EN; + + writel(ahbcfg, hsotg->regs + GAHBCFG); + + return 0; +} + +static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg) +{ + u32 usbcfg; + + usbcfg = readl(hsotg->regs + GUSBCFG); + usbcfg &= ~(GUSBCFG_HNPCAP | GUSBCFG_SRPCAP); + + switch (hsotg->hw_params.op_mode) { + case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE: + if (hsotg->core_params->otg_cap == + DWC2_CAP_PARAM_HNP_SRP_CAPABLE) + usbcfg |= GUSBCFG_HNPCAP; + if (hsotg->core_params->otg_cap != + DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE) + usbcfg |= GUSBCFG_SRPCAP; + break; + + case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE: + case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE: + case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST: + if (hsotg->core_params->otg_cap != + DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE) + usbcfg |= GUSBCFG_SRPCAP; + break; + + case GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE: + case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE: + case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST: + default: + break; + } + + writel(usbcfg, hsotg->regs + GUSBCFG); +} + +/** + * dwc2_core_init() - Initializes the DWC_otg controller registers and + * prepares the core for device mode or host mode operation + * + * @hsotg: Programming view of the DWC_otg controller + * @select_phy: If true then also set the Phy type + * @irq: If >= 0, the irq to register + */ +int dwc2_core_init(struct dwc2_hsotg *hsotg, bool select_phy, int irq) +{ + u32 usbcfg, otgctl; + int retval; + + dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg); + + usbcfg = readl(hsotg->regs + GUSBCFG); + + /* Set ULPI External VBUS bit if needed */ + usbcfg &= ~GUSBCFG_ULPI_EXT_VBUS_DRV; + if (hsotg->core_params->phy_ulpi_ext_vbus == + DWC2_PHY_ULPI_EXTERNAL_VBUS) + usbcfg |= GUSBCFG_ULPI_EXT_VBUS_DRV; + + /* Set external TS Dline pulsing bit if needed */ + usbcfg &= ~GUSBCFG_TERMSELDLPULSE; + if (hsotg->core_params->ts_dline > 0) + usbcfg |= GUSBCFG_TERMSELDLPULSE; + + writel(usbcfg, hsotg->regs + GUSBCFG); + + /* Reset the Controller */ + retval = dwc2_core_reset(hsotg); + if (retval) { + dev_err(hsotg->dev, "%s(): Reset failed, aborting\n", + __func__); + return retval; + } + + /* + * This needs to happen in FS mode before any other programming occurs + */ + retval = dwc2_phy_init(hsotg, select_phy); + if (retval) + return retval; + + /* Program the GAHBCFG Register */ + retval = dwc2_gahbcfg_init(hsotg); + if (retval) + return retval; + + /* Program the GUSBCFG register */ + dwc2_gusbcfg_init(hsotg); + + /* Program the GOTGCTL register */ + otgctl = readl(hsotg->regs + GOTGCTL); + otgctl &= ~GOTGCTL_OTGVER; + if (hsotg->core_params->otg_ver > 0) + otgctl |= GOTGCTL_OTGVER; + writel(otgctl, hsotg->regs + GOTGCTL); + dev_dbg(hsotg->dev, "OTG VER PARAM: %d\n", hsotg->core_params->otg_ver); + + /* Clear the SRP success bit for FS-I2c */ + hsotg->srp_success = 0; + + /* Enable common interrupts */ + dwc2_enable_common_interrupts(hsotg); + + /* + * Do device or host initialization based on mode during PCD and + * HCD initialization + */ + if (dwc2_is_host_mode(hsotg)) { + dev_dbg(hsotg->dev, "Host Mode\n"); + hsotg->op_state = OTG_STATE_A_HOST; + } else { + dev_dbg(hsotg->dev, "Device Mode\n"); + hsotg->op_state = OTG_STATE_B_PERIPHERAL; + } + + return 0; +} + +/** + * dwc2_enable_host_interrupts() - Enables the Host mode interrupts + * + * @hsotg: Programming view of DWC_otg controller + */ +void dwc2_enable_host_interrupts(struct dwc2_hsotg *hsotg) +{ + u32 intmsk; + + dev_dbg(hsotg->dev, "%s()\n", __func__); + + /* Disable all interrupts */ + writel(0, hsotg->regs + GINTMSK); + writel(0, hsotg->regs + HAINTMSK); + + /* Enable the common interrupts */ + dwc2_enable_common_interrupts(hsotg); + + /* Enable host mode interrupts without disturbing common interrupts */ + intmsk = readl(hsotg->regs + GINTMSK); + intmsk |= GINTSTS_DISCONNINT | GINTSTS_PRTINT | GINTSTS_HCHINT; + writel(intmsk, hsotg->regs + GINTMSK); +} + +/** + * dwc2_disable_host_interrupts() - Disables the Host Mode interrupts + * + * @hsotg: Programming view of DWC_otg controller + */ +void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg) +{ + u32 intmsk = readl(hsotg->regs + GINTMSK); + + /* Disable host mode interrupts without disturbing common interrupts */ + intmsk &= ~(GINTSTS_SOF | GINTSTS_PRTINT | GINTSTS_HCHINT | + GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP); + writel(intmsk, hsotg->regs + GINTMSK); +} + +/* + * dwc2_calculate_dynamic_fifo() - Calculates the default fifo size + * For system that have a total fifo depth that is smaller than the default + * RX + TX fifo size. + * + * @hsotg: Programming view of DWC_otg controller + */ +static void dwc2_calculate_dynamic_fifo(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *params = hsotg->core_params; + struct dwc2_hw_params *hw = &hsotg->hw_params; + u32 rxfsiz, nptxfsiz, ptxfsiz, total_fifo_size; + + total_fifo_size = hw->total_fifo_size; + rxfsiz = params->host_rx_fifo_size; + nptxfsiz = params->host_nperio_tx_fifo_size; + ptxfsiz = params->host_perio_tx_fifo_size; + + /* + * Will use Method 2 defined in the DWC2 spec: minimum FIFO depth + * allocation with support for high bandwidth endpoints. Synopsys + * defines MPS(Max Packet size) for a periodic EP=1024, and for + * non-periodic as 512. + */ + if (total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz)) { + /* + * For Buffer DMA mode/Scatter Gather DMA mode + * 2 * ((Largest Packet size / 4) + 1 + 1) + n + * with n = number of host channel. + * 2 * ((1024/4) + 2) = 516 + */ + rxfsiz = 516 + hw->host_channels; + + /* + * min non-periodic tx fifo depth + * 2 * (largest non-periodic USB packet used / 4) + * 2 * (512/4) = 256 + */ + nptxfsiz = 256; + + /* + * min periodic tx fifo depth + * (largest packet size*MC)/4 + * (1024 * 3)/4 = 768 + */ + ptxfsiz = 768; + + params->host_rx_fifo_size = rxfsiz; + params->host_nperio_tx_fifo_size = nptxfsiz; + params->host_perio_tx_fifo_size = ptxfsiz; + } + + /* + * If the summation of RX, NPTX and PTX fifo sizes is still + * bigger than the total_fifo_size, then we have a problem. + * + * We won't be able to allocate as many endpoints. Right now, + * we're just printing an error message, but ideally this FIFO + * allocation algorithm would be improved in the future. + * + * FIXME improve this FIFO allocation algorithm. + */ + if (unlikely(total_fifo_size < (rxfsiz + nptxfsiz + ptxfsiz))) + dev_err(hsotg->dev, "invalid fifo sizes\n"); +} + +static void dwc2_config_fifos(struct dwc2_hsotg *hsotg) +{ + struct dwc2_core_params *params = hsotg->core_params; + u32 nptxfsiz, hptxfsiz, dfifocfg, grxfsiz; + + if (!params->enable_dynamic_fifo) + return; + + dwc2_calculate_dynamic_fifo(hsotg); + + /* Rx FIFO */ + grxfsiz = readl(hsotg->regs + GRXFSIZ); + dev_dbg(hsotg->dev, "initial grxfsiz=%08x\n", grxfsiz); + grxfsiz &= ~GRXFSIZ_DEPTH_MASK; + grxfsiz |= params->host_rx_fifo_size << + GRXFSIZ_DEPTH_SHIFT & GRXFSIZ_DEPTH_MASK; + writel(grxfsiz, hsotg->regs + GRXFSIZ); + dev_dbg(hsotg->dev, "new grxfsiz=%08x\n", readl(hsotg->regs + GRXFSIZ)); + + /* Non-periodic Tx FIFO */ + dev_dbg(hsotg->dev, "initial gnptxfsiz=%08x\n", + readl(hsotg->regs + GNPTXFSIZ)); + nptxfsiz = params->host_nperio_tx_fifo_size << + FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK; + nptxfsiz |= params->host_rx_fifo_size << + FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK; + writel(nptxfsiz, hsotg->regs + GNPTXFSIZ); + dev_dbg(hsotg->dev, "new gnptxfsiz=%08x\n", + readl(hsotg->regs + GNPTXFSIZ)); + + /* Periodic Tx FIFO */ + dev_dbg(hsotg->dev, "initial hptxfsiz=%08x\n", + readl(hsotg->regs + HPTXFSIZ)); + hptxfsiz = params->host_perio_tx_fifo_size << + FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK; + hptxfsiz |= (params->host_rx_fifo_size + + params->host_nperio_tx_fifo_size) << + FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK; + writel(hptxfsiz, hsotg->regs + HPTXFSIZ); + dev_dbg(hsotg->dev, "new hptxfsiz=%08x\n", + readl(hsotg->regs + HPTXFSIZ)); + + if (hsotg->core_params->en_multiple_tx_fifo > 0 && + hsotg->hw_params.snpsid <= DWC2_CORE_REV_2_94a) { + /* + * Global DFIFOCFG calculation for Host mode - + * include RxFIFO, NPTXFIFO and HPTXFIFO + */ + dfifocfg = readl(hsotg->regs + GDFIFOCFG); + dfifocfg &= ~GDFIFOCFG_EPINFOBASE_MASK; + dfifocfg |= (params->host_rx_fifo_size + + params->host_nperio_tx_fifo_size + + params->host_perio_tx_fifo_size) << + GDFIFOCFG_EPINFOBASE_SHIFT & + GDFIFOCFG_EPINFOBASE_MASK; + writel(dfifocfg, hsotg->regs + GDFIFOCFG); + } +} + +/** + * dwc2_core_host_init() - Initializes the DWC_otg controller registers for + * Host mode + * + * @hsotg: Programming view of DWC_otg controller + * + * This function flushes the Tx and Rx FIFOs and flushes any entries in the + * request queues. Host channels are reset to ensure that they are ready for + * performing transfers. + */ +void dwc2_core_host_init(struct dwc2_hsotg *hsotg) +{ + u32 hcfg, hfir, otgctl; + + dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg); + + /* Restart the Phy Clock */ + writel(0, hsotg->regs + PCGCTL); + + /* Initialize Host Configuration Register */ + dwc2_init_fs_ls_pclk_sel(hsotg); + if (hsotg->core_params->speed == DWC2_SPEED_PARAM_FULL) { + hcfg = readl(hsotg->regs + HCFG); + hcfg |= HCFG_FSLSSUPP; + writel(hcfg, hsotg->regs + HCFG); + } + + /* + * This bit allows dynamic reloading of the HFIR register during + * runtime. This bit needs to be programmed during initial configuration + * and its value must not be changed during runtime. + */ + if (hsotg->core_params->reload_ctl > 0) { + hfir = readl(hsotg->regs + HFIR); + hfir |= HFIR_RLDCTRL; + writel(hfir, hsotg->regs + HFIR); + } + + if (hsotg->core_params->dma_desc_enable > 0) { + u32 op_mode = hsotg->hw_params.op_mode; + if (hsotg->hw_params.snpsid < DWC2_CORE_REV_2_90a || + !hsotg->hw_params.dma_desc_enable || + op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE || + op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE || + op_mode == GHWCFG2_OP_MODE_UNDEFINED) { + dev_err(hsotg->dev, + "Hardware does not support descriptor DMA mode -\n"); + dev_err(hsotg->dev, + "falling back to buffer DMA mode.\n"); + hsotg->core_params->dma_desc_enable = 0; + } else { + hcfg = readl(hsotg->regs + HCFG); + hcfg |= HCFG_DESCDMA; + writel(hcfg, hsotg->regs + HCFG); + } + } + + /* Configure data FIFO sizes */ + dwc2_config_fifos(hsotg); + + /* TODO - check this */ + /* Clear Host Set HNP Enable in the OTG Control Register */ + otgctl = readl(hsotg->regs + GOTGCTL); + otgctl &= ~GOTGCTL_HSTSETHNPEN; + writel(otgctl, hsotg->regs + GOTGCTL); + + /* Make sure the FIFOs are flushed */ + dwc2_flush_tx_fifo(hsotg, 0x10 /* all TX FIFOs */); + dwc2_flush_rx_fifo(hsotg); + + /* Clear Host Set HNP Enable in the OTG Control Register */ + otgctl = readl(hsotg->regs + GOTGCTL); + otgctl &= ~GOTGCTL_HSTSETHNPEN; + writel(otgctl, hsotg->regs + GOTGCTL); + + if (hsotg->core_params->dma_desc_enable <= 0) { + int num_channels, i; + u32 hcchar; + + /* Flush out any leftover queued requests */ + num_channels = hsotg->core_params->host_channels; + for (i = 0; i < num_channels; i++) { + hcchar = readl(hsotg->regs + HCCHAR(i)); + hcchar &= ~HCCHAR_CHENA; + hcchar |= HCCHAR_CHDIS; + hcchar &= ~HCCHAR_EPDIR; + writel(hcchar, hsotg->regs + HCCHAR(i)); + } + + /* Halt all channels to put them into a known state */ + for (i = 0; i < num_channels; i++) { + int count = 0; + + hcchar = readl(hsotg->regs + HCCHAR(i)); + hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS; + hcchar &= ~HCCHAR_EPDIR; + writel(hcchar, hsotg->regs + HCCHAR(i)); + dev_dbg(hsotg->dev, "%s: Halt channel %d\n", + __func__, i); + do { + hcchar = readl(hsotg->regs + HCCHAR(i)); + if (++count > 1000) { + dev_err(hsotg->dev, + "Unable to clear enable on channel %d\n", + i); + break; + } + udelay(1); + } while (hcchar & HCCHAR_CHENA); + } + } + + /* Turn on the vbus power */ + dev_dbg(hsotg->dev, "Init: Port Power? op_state=%d\n", hsotg->op_state); + if (hsotg->op_state == OTG_STATE_A_HOST) { + u32 hprt0 = dwc2_read_hprt0(hsotg); + + dev_dbg(hsotg->dev, "Init: Power Port (%d)\n", + !!(hprt0 & HPRT0_PWR)); + if (!(hprt0 & HPRT0_PWR)) { + hprt0 |= HPRT0_PWR; + writel(hprt0, hsotg->regs + HPRT0); + } + } + + dwc2_enable_host_interrupts(hsotg); +} + +static void dwc2_hc_enable_slave_ints(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + u32 hcintmsk = HCINTMSK_CHHLTD; + + switch (chan->ep_type) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + dev_vdbg(hsotg->dev, "control/bulk\n"); + hcintmsk |= HCINTMSK_XFERCOMPL; + hcintmsk |= HCINTMSK_STALL; + hcintmsk |= HCINTMSK_XACTERR; + hcintmsk |= HCINTMSK_DATATGLERR; + if (chan->ep_is_in) { + hcintmsk |= HCINTMSK_BBLERR; + } else { + hcintmsk |= HCINTMSK_NAK; + hcintmsk |= HCINTMSK_NYET; + if (chan->do_ping) + hcintmsk |= HCINTMSK_ACK; + } + + if (chan->do_split) { + hcintmsk |= HCINTMSK_NAK; + if (chan->complete_split) + hcintmsk |= HCINTMSK_NYET; + else + hcintmsk |= HCINTMSK_ACK; + } + + if (chan->error_state) + hcintmsk |= HCINTMSK_ACK; + break; + + case USB_ENDPOINT_XFER_INT: + if (dbg_perio()) + dev_vdbg(hsotg->dev, "intr\n"); + hcintmsk |= HCINTMSK_XFERCOMPL; + hcintmsk |= HCINTMSK_NAK; + hcintmsk |= HCINTMSK_STALL; + hcintmsk |= HCINTMSK_XACTERR; + hcintmsk |= HCINTMSK_DATATGLERR; + hcintmsk |= HCINTMSK_FRMOVRUN; + + if (chan->ep_is_in) + hcintmsk |= HCINTMSK_BBLERR; + if (chan->error_state) + hcintmsk |= HCINTMSK_ACK; + if (chan->do_split) { + if (chan->complete_split) + hcintmsk |= HCINTMSK_NYET; + else + hcintmsk |= HCINTMSK_ACK; + } + break; + + case USB_ENDPOINT_XFER_ISOC: + if (dbg_perio()) + dev_vdbg(hsotg->dev, "isoc\n"); + hcintmsk |= HCINTMSK_XFERCOMPL; + hcintmsk |= HCINTMSK_FRMOVRUN; + hcintmsk |= HCINTMSK_ACK; + + if (chan->ep_is_in) { + hcintmsk |= HCINTMSK_XACTERR; + hcintmsk |= HCINTMSK_BBLERR; + } + break; + default: + dev_err(hsotg->dev, "## Unknown EP type ##\n"); + break; + } + + writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num)); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk); +} + +static void dwc2_hc_enable_dma_ints(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + u32 hcintmsk = HCINTMSK_CHHLTD; + + /* + * For Descriptor DMA mode core halts the channel on AHB error. + * Interrupt is not required. + */ + if (hsotg->core_params->dma_desc_enable <= 0) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "desc DMA disabled\n"); + hcintmsk |= HCINTMSK_AHBERR; + } else { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "desc DMA enabled\n"); + if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) + hcintmsk |= HCINTMSK_XFERCOMPL; + } + + if (chan->error_state && !chan->do_split && + chan->ep_type != USB_ENDPOINT_XFER_ISOC) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "setting ACK\n"); + hcintmsk |= HCINTMSK_ACK; + if (chan->ep_is_in) { + hcintmsk |= HCINTMSK_DATATGLERR; + if (chan->ep_type != USB_ENDPOINT_XFER_INT) + hcintmsk |= HCINTMSK_NAK; + } + } + + writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num)); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk); +} + +static void dwc2_hc_enable_ints(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + u32 intmsk; + + if (hsotg->core_params->dma_enable > 0) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "DMA enabled\n"); + dwc2_hc_enable_dma_ints(hsotg, chan); + } else { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "DMA disabled\n"); + dwc2_hc_enable_slave_ints(hsotg, chan); + } + + /* Enable the top level host channel interrupt */ + intmsk = readl(hsotg->regs + HAINTMSK); + intmsk |= 1 << chan->hc_num; + writel(intmsk, hsotg->regs + HAINTMSK); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "set HAINTMSK to %08x\n", intmsk); + + /* Make sure host channel interrupts are enabled */ + intmsk = readl(hsotg->regs + GINTMSK); + intmsk |= GINTSTS_HCHINT; + writel(intmsk, hsotg->regs + GINTMSK); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "set GINTMSK to %08x\n", intmsk); +} + +/** + * dwc2_hc_init() - Prepares a host channel for transferring packets to/from + * a specific endpoint + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Information needed to initialize the host channel + * + * The HCCHARn register is set up with the characteristics specified in chan. + * Host channel interrupts that may need to be serviced while this transfer is + * in progress are enabled. + */ +void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan) +{ + u8 hc_num = chan->hc_num; + u32 hcintmsk; + u32 hcchar; + u32 hcsplt = 0; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + /* Clear old interrupt conditions for this host channel */ + hcintmsk = 0xffffffff; + hcintmsk &= ~HCINTMSK_RESERVED14_31; + writel(hcintmsk, hsotg->regs + HCINT(hc_num)); + + /* Enable channel interrupts required for this transfer */ + dwc2_hc_enable_ints(hsotg, chan); + + /* + * Program the HCCHARn register with the endpoint characteristics for + * the current transfer + */ + hcchar = chan->dev_addr << HCCHAR_DEVADDR_SHIFT & HCCHAR_DEVADDR_MASK; + hcchar |= chan->ep_num << HCCHAR_EPNUM_SHIFT & HCCHAR_EPNUM_MASK; + if (chan->ep_is_in) + hcchar |= HCCHAR_EPDIR; + if (chan->speed == USB_SPEED_LOW) + hcchar |= HCCHAR_LSPDDEV; + hcchar |= chan->ep_type << HCCHAR_EPTYPE_SHIFT & HCCHAR_EPTYPE_MASK; + hcchar |= chan->max_packet << HCCHAR_MPS_SHIFT & HCCHAR_MPS_MASK; + writel(hcchar, hsotg->regs + HCCHAR(hc_num)); + if (dbg_hc(chan)) { + dev_vdbg(hsotg->dev, "set HCCHAR(%d) to %08x\n", + hc_num, hcchar); + + dev_vdbg(hsotg->dev, "%s: Channel %d\n", + __func__, hc_num); + dev_vdbg(hsotg->dev, " Dev Addr: %d\n", + chan->dev_addr); + dev_vdbg(hsotg->dev, " Ep Num: %d\n", + chan->ep_num); + dev_vdbg(hsotg->dev, " Is In: %d\n", + chan->ep_is_in); + dev_vdbg(hsotg->dev, " Is Low Speed: %d\n", + chan->speed == USB_SPEED_LOW); + dev_vdbg(hsotg->dev, " Ep Type: %d\n", + chan->ep_type); + dev_vdbg(hsotg->dev, " Max Pkt: %d\n", + chan->max_packet); + } + + /* Program the HCSPLT register for SPLITs */ + if (chan->do_split) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, + "Programming HC %d with split --> %s\n", + hc_num, + chan->complete_split ? "CSPLIT" : "SSPLIT"); + if (chan->complete_split) + hcsplt |= HCSPLT_COMPSPLT; + hcsplt |= chan->xact_pos << HCSPLT_XACTPOS_SHIFT & + HCSPLT_XACTPOS_MASK; + hcsplt |= chan->hub_addr << HCSPLT_HUBADDR_SHIFT & + HCSPLT_HUBADDR_MASK; + hcsplt |= chan->hub_port << HCSPLT_PRTADDR_SHIFT & + HCSPLT_PRTADDR_MASK; + if (dbg_hc(chan)) { + dev_vdbg(hsotg->dev, " comp split %d\n", + chan->complete_split); + dev_vdbg(hsotg->dev, " xact pos %d\n", + chan->xact_pos); + dev_vdbg(hsotg->dev, " hub addr %d\n", + chan->hub_addr); + dev_vdbg(hsotg->dev, " hub port %d\n", + chan->hub_port); + dev_vdbg(hsotg->dev, " is_in %d\n", + chan->ep_is_in); + dev_vdbg(hsotg->dev, " Max Pkt %d\n", + chan->max_packet); + dev_vdbg(hsotg->dev, " xferlen %d\n", + chan->xfer_len); + } + } + + writel(hcsplt, hsotg->regs + HCSPLT(hc_num)); +} + +/** + * dwc2_hc_halt() - Attempts to halt a host channel + * + * @hsotg: Controller register interface + * @chan: Host channel to halt + * @halt_status: Reason for halting the channel + * + * This function should only be called in Slave mode or to abort a transfer in + * either Slave mode or DMA mode. Under normal circumstances in DMA mode, the + * controller halts the channel when the transfer is complete or a condition + * occurs that requires application intervention. + * + * In slave mode, checks for a free request queue entry, then sets the Channel + * Enable and Channel Disable bits of the Host Channel Characteristics + * register of the specified channel to intiate the halt. If there is no free + * request queue entry, sets only the Channel Disable bit of the HCCHARn + * register to flush requests for this channel. In the latter case, sets a + * flag to indicate that the host channel needs to be halted when a request + * queue slot is open. + * + * In DMA mode, always sets the Channel Enable and Channel Disable bits of the + * HCCHARn register. The controller ensures there is space in the request + * queue before submitting the halt request. + * + * Some time may elapse before the core flushes any posted requests for this + * host channel and halts. The Channel Halted interrupt handler completes the + * deactivation of the host channel. + */ +void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan, + enum dwc2_halt_status halt_status) +{ + u32 nptxsts, hptxsts, hcchar; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "%s()\n", __func__); + if (halt_status == DWC2_HC_XFER_NO_HALT_STATUS) + dev_err(hsotg->dev, "!!! halt_status = %d !!!\n", halt_status); + + if (halt_status == DWC2_HC_XFER_URB_DEQUEUE || + halt_status == DWC2_HC_XFER_AHB_ERR) { + /* + * Disable all channel interrupts except Ch Halted. The QTD + * and QH state associated with this transfer has been cleared + * (in the case of URB_DEQUEUE), so the channel needs to be + * shut down carefully to prevent crashes. + */ + u32 hcintmsk = HCINTMSK_CHHLTD; + + dev_vdbg(hsotg->dev, "dequeue/error\n"); + writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num)); + + /* + * Make sure no other interrupts besides halt are currently + * pending. Handling another interrupt could cause a crash due + * to the QTD and QH state. + */ + writel(~hcintmsk, hsotg->regs + HCINT(chan->hc_num)); + + /* + * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR + * even if the channel was already halted for some other + * reason + */ + chan->halt_status = halt_status; + + hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); + if (!(hcchar & HCCHAR_CHENA)) { + /* + * The channel is either already halted or it hasn't + * started yet. In DMA mode, the transfer may halt if + * it finishes normally or a condition occurs that + * requires driver intervention. Don't want to halt + * the channel again. In either Slave or DMA mode, + * it's possible that the transfer has been assigned + * to a channel, but not started yet when an URB is + * dequeued. Don't want to halt a channel that hasn't + * started yet. + */ + return; + } + } + if (chan->halt_pending) { + /* + * A halt has already been issued for this channel. This might + * happen when a transfer is aborted by a higher level in + * the stack. + */ + dev_vdbg(hsotg->dev, + "*** %s: Channel %d, chan->halt_pending already set ***\n", + __func__, chan->hc_num); + return; + } + + hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); + + /* No need to set the bit in DDMA for disabling the channel */ + /* TODO check it everywhere channel is disabled */ + if (hsotg->core_params->dma_desc_enable <= 0) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "desc DMA disabled\n"); + hcchar |= HCCHAR_CHENA; + } else { + if (dbg_hc(chan)) + dev_dbg(hsotg->dev, "desc DMA enabled\n"); + } + hcchar |= HCCHAR_CHDIS; + + if (hsotg->core_params->dma_enable <= 0) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "DMA not enabled\n"); + hcchar |= HCCHAR_CHENA; + + /* Check for space in the request queue to issue the halt */ + if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL || + chan->ep_type == USB_ENDPOINT_XFER_BULK) { + dev_vdbg(hsotg->dev, "control/bulk\n"); + nptxsts = readl(hsotg->regs + GNPTXSTS); + if ((nptxsts & TXSTS_QSPCAVAIL_MASK) == 0) { + dev_vdbg(hsotg->dev, "Disabling channel\n"); + hcchar &= ~HCCHAR_CHENA; + } + } else { + if (dbg_perio()) + dev_vdbg(hsotg->dev, "isoc/intr\n"); + hptxsts = readl(hsotg->regs + HPTXSTS); + if ((hptxsts & TXSTS_QSPCAVAIL_MASK) == 0 || + hsotg->queuing_high_bandwidth) { + if (dbg_perio()) + dev_vdbg(hsotg->dev, "Disabling channel\n"); + hcchar &= ~HCCHAR_CHENA; + } + } + } else { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "DMA enabled\n"); + } + + writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num)); + chan->halt_status = halt_status; + + if (hcchar & HCCHAR_CHENA) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "Channel enabled\n"); + chan->halt_pending = 1; + chan->halt_on_queue = 0; + } else { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "Channel disabled\n"); + chan->halt_on_queue = 1; + } + + if (dbg_hc(chan)) { + dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, + chan->hc_num); + dev_vdbg(hsotg->dev, " hcchar: 0x%08x\n", + hcchar); + dev_vdbg(hsotg->dev, " halt_pending: %d\n", + chan->halt_pending); + dev_vdbg(hsotg->dev, " halt_on_queue: %d\n", + chan->halt_on_queue); + dev_vdbg(hsotg->dev, " halt_status: %d\n", + chan->halt_status); + } +} + +/** + * dwc2_hc_cleanup() - Clears the transfer state for a host channel + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Identifies the host channel to clean up + * + * This function is normally called after a transfer is done and the host + * channel is being released + */ +void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan) +{ + u32 hcintmsk; + + chan->xfer_started = 0; + + /* + * Clear channel interrupt enables and any unhandled channel interrupt + * conditions + */ + writel(0, hsotg->regs + HCINTMSK(chan->hc_num)); + hcintmsk = 0xffffffff; + hcintmsk &= ~HCINTMSK_RESERVED14_31; + writel(hcintmsk, hsotg->regs + HCINT(chan->hc_num)); +} + +/** + * dwc2_hc_set_even_odd_frame() - Sets the channel property that indicates in + * which frame a periodic transfer should occur + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Identifies the host channel to set up and its properties + * @hcchar: Current value of the HCCHAR register for the specified host channel + * + * This function has no effect on non-periodic transfers + */ +static void dwc2_hc_set_even_odd_frame(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, u32 *hcchar) +{ + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) { + /* 1 if _next_ frame is odd, 0 if it's even */ + if (!(dwc2_hcd_get_frame_number(hsotg) & 0x1)) + *hcchar |= HCCHAR_ODDFRM; + } +} + +static void dwc2_set_pid_isoc(struct dwc2_host_chan *chan) +{ + /* Set up the initial PID for the transfer */ + if (chan->speed == USB_SPEED_HIGH) { + if (chan->ep_is_in) { + if (chan->multi_count == 1) + chan->data_pid_start = DWC2_HC_PID_DATA0; + else if (chan->multi_count == 2) + chan->data_pid_start = DWC2_HC_PID_DATA1; + else + chan->data_pid_start = DWC2_HC_PID_DATA2; + } else { + if (chan->multi_count == 1) + chan->data_pid_start = DWC2_HC_PID_DATA0; + else + chan->data_pid_start = DWC2_HC_PID_MDATA; + } + } else { + chan->data_pid_start = DWC2_HC_PID_DATA0; + } +} + +/** + * dwc2_hc_write_packet() - Writes a packet into the Tx FIFO associated with + * the Host Channel + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Information needed to initialize the host channel + * + * This function should only be called in Slave mode. For a channel associated + * with a non-periodic EP, the non-periodic Tx FIFO is written. For a channel + * associated with a periodic EP, the periodic Tx FIFO is written. + * + * Upon return the xfer_buf and xfer_count fields in chan are incremented by + * the number of bytes written to the Tx FIFO. + */ +static void dwc2_hc_write_packet(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + u32 i; + u32 remaining_count; + u32 byte_count; + u32 dword_count; + u32 __iomem *data_fifo; + u32 *data_buf = (u32 *)chan->xfer_buf; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + data_fifo = (u32 __iomem *)(hsotg->regs + HCFIFO(chan->hc_num)); + + remaining_count = chan->xfer_len - chan->xfer_count; + if (remaining_count > chan->max_packet) + byte_count = chan->max_packet; + else + byte_count = remaining_count; + + dword_count = (byte_count + 3) / 4; + + if (((unsigned long)data_buf & 0x3) == 0) { + /* xfer_buf is DWORD aligned */ + for (i = 0; i < dword_count; i++, data_buf++) + writel(*data_buf, data_fifo); + } else { + /* xfer_buf is not DWORD aligned */ + for (i = 0; i < dword_count; i++, data_buf++) { + u32 data = data_buf[0] | data_buf[1] << 8 | + data_buf[2] << 16 | data_buf[3] << 24; + writel(data, data_fifo); + } + } + + chan->xfer_count += byte_count; + chan->xfer_buf += byte_count; +} + +/** + * dwc2_hc_start_transfer() - Does the setup for a data transfer for a host + * channel and starts the transfer + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Information needed to initialize the host channel. The xfer_len value + * may be reduced to accommodate the max widths of the XferSize and + * PktCnt fields in the HCTSIZn register. The multi_count value may be + * changed to reflect the final xfer_len value. + * + * This function may be called in either Slave mode or DMA mode. In Slave mode, + * the caller must ensure that there is sufficient space in the request queue + * and Tx Data FIFO. + * + * For an OUT transfer in Slave mode, it loads a data packet into the + * appropriate FIFO. If necessary, additional data packets are loaded in the + * Host ISR. + * + * For an IN transfer in Slave mode, a data packet is requested. The data + * packets are unloaded from the Rx FIFO in the Host ISR. If necessary, + * additional data packets are requested in the Host ISR. + * + * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ + * register along with a packet count of 1 and the channel is enabled. This + * causes a single PING transaction to occur. Other fields in HCTSIZ are + * simply set to 0 since no data transfer occurs in this case. + * + * For a PING transfer in DMA mode, the HCTSIZ register is initialized with + * all the information required to perform the subsequent data transfer. In + * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the + * controller performs the entire PING protocol, then starts the data + * transfer. + */ +void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + u32 max_hc_xfer_size = hsotg->core_params->max_transfer_size; + u16 max_hc_pkt_count = hsotg->core_params->max_packet_count; + u32 hcchar; + u32 hctsiz = 0; + u16 num_packets; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + if (chan->do_ping) { + if (hsotg->core_params->dma_enable <= 0) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "ping, no DMA\n"); + dwc2_hc_do_ping(hsotg, chan); + chan->xfer_started = 1; + return; + } else { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "ping, DMA\n"); + hctsiz |= TSIZ_DOPNG; + } + } + + if (chan->do_split) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "split\n"); + num_packets = 1; + + if (chan->complete_split && !chan->ep_is_in) + /* + * For CSPLIT OUT Transfer, set the size to 0 so the + * core doesn't expect any data written to the FIFO + */ + chan->xfer_len = 0; + else if (chan->ep_is_in || chan->xfer_len > chan->max_packet) + chan->xfer_len = chan->max_packet; + else if (!chan->ep_is_in && chan->xfer_len > 188) + chan->xfer_len = 188; + + hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT & + TSIZ_XFERSIZE_MASK; + } else { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "no split\n"); + /* + * Ensure that the transfer length and packet count will fit + * in the widths allocated for them in the HCTSIZn register + */ + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) { + /* + * Make sure the transfer size is no larger than one + * (micro)frame's worth of data. (A check was done + * when the periodic transfer was accepted to ensure + * that a (micro)frame's worth of data can be + * programmed into a channel.) + */ + u32 max_periodic_len = + chan->multi_count * chan->max_packet; + + if (chan->xfer_len > max_periodic_len) + chan->xfer_len = max_periodic_len; + } else if (chan->xfer_len > max_hc_xfer_size) { + /* + * Make sure that xfer_len is a multiple of max packet + * size + */ + chan->xfer_len = + max_hc_xfer_size - chan->max_packet + 1; + } + + if (chan->xfer_len > 0) { + num_packets = (chan->xfer_len + chan->max_packet - 1) / + chan->max_packet; + if (num_packets > max_hc_pkt_count) { + num_packets = max_hc_pkt_count; + chan->xfer_len = num_packets * chan->max_packet; + } + } else { + /* Need 1 packet for transfer length of 0 */ + num_packets = 1; + } + + if (chan->ep_is_in) + /* + * Always program an integral # of max packets for IN + * transfers + */ + chan->xfer_len = num_packets * chan->max_packet; + + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) + /* + * Make sure that the multi_count field matches the + * actual transfer length + */ + chan->multi_count = num_packets; + + if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) + dwc2_set_pid_isoc(chan); + + hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT & + TSIZ_XFERSIZE_MASK; + } + + chan->start_pkt_count = num_packets; + hctsiz |= num_packets << TSIZ_PKTCNT_SHIFT & TSIZ_PKTCNT_MASK; + hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT & + TSIZ_SC_MC_PID_MASK; + writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num)); + if (dbg_hc(chan)) { + dev_vdbg(hsotg->dev, "Wrote %08x to HCTSIZ(%d)\n", + hctsiz, chan->hc_num); + + dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, + chan->hc_num); + dev_vdbg(hsotg->dev, " Xfer Size: %d\n", + (hctsiz & TSIZ_XFERSIZE_MASK) >> + TSIZ_XFERSIZE_SHIFT); + dev_vdbg(hsotg->dev, " Num Pkts: %d\n", + (hctsiz & TSIZ_PKTCNT_MASK) >> + TSIZ_PKTCNT_SHIFT); + dev_vdbg(hsotg->dev, " Start PID: %d\n", + (hctsiz & TSIZ_SC_MC_PID_MASK) >> + TSIZ_SC_MC_PID_SHIFT); + } + + if (hsotg->core_params->dma_enable > 0) { + dma_addr_t dma_addr; + + if (chan->align_buf) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "align_buf\n"); + dma_addr = chan->align_buf; + } else { + dma_addr = chan->xfer_dma; + } + writel((u32)dma_addr, hsotg->regs + HCDMA(chan->hc_num)); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n", + (unsigned long)dma_addr, chan->hc_num); + } + + /* Start the split */ + if (chan->do_split) { + u32 hcsplt = readl(hsotg->regs + HCSPLT(chan->hc_num)); + + hcsplt |= HCSPLT_SPLTENA; + writel(hcsplt, hsotg->regs + HCSPLT(chan->hc_num)); + } + + hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); + hcchar &= ~HCCHAR_MULTICNT_MASK; + hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT & + HCCHAR_MULTICNT_MASK; + dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar); + + if (hcchar & HCCHAR_CHDIS) + dev_warn(hsotg->dev, + "%s: chdis set, channel %d, hcchar 0x%08x\n", + __func__, chan->hc_num, hcchar); + + /* Set host channel enable after all other setup is complete */ + hcchar |= HCCHAR_CHENA; + hcchar &= ~HCCHAR_CHDIS; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, " Multi Cnt: %d\n", + (hcchar & HCCHAR_MULTICNT_MASK) >> + HCCHAR_MULTICNT_SHIFT); + + writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num)); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar, + chan->hc_num); + + chan->xfer_started = 1; + chan->requests++; + + if (hsotg->core_params->dma_enable <= 0 && + !chan->ep_is_in && chan->xfer_len > 0) + /* Load OUT packet into the appropriate Tx FIFO */ + dwc2_hc_write_packet(hsotg, chan); +} + +/** + * dwc2_hc_start_transfer_ddma() - Does the setup for a data transfer for a + * host channel and starts the transfer in Descriptor DMA mode + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Information needed to initialize the host channel + * + * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set. + * Sets PID and NTD values. For periodic transfers initializes SCHED_INFO field + * with micro-frame bitmap. + * + * Initializes HCDMA register with descriptor list address and CTD value then + * starts the transfer via enabling the channel. + */ +void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + u32 hcchar; + u32 hc_dma; + u32 hctsiz = 0; + + if (chan->do_ping) + hctsiz |= TSIZ_DOPNG; + + if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) + dwc2_set_pid_isoc(chan); + + /* Packet Count and Xfer Size are not used in Descriptor DMA mode */ + hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT & + TSIZ_SC_MC_PID_MASK; + + /* 0 - 1 descriptor, 1 - 2 descriptors, etc */ + hctsiz |= (chan->ntd - 1) << TSIZ_NTD_SHIFT & TSIZ_NTD_MASK; + + /* Non-zero only for high-speed interrupt endpoints */ + hctsiz |= chan->schinfo << TSIZ_SCHINFO_SHIFT & TSIZ_SCHINFO_MASK; + + if (dbg_hc(chan)) { + dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, + chan->hc_num); + dev_vdbg(hsotg->dev, " Start PID: %d\n", + chan->data_pid_start); + dev_vdbg(hsotg->dev, " NTD: %d\n", chan->ntd - 1); + } + + writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num)); + + hc_dma = (u32)chan->desc_list_addr & HCDMA_DMA_ADDR_MASK; + + /* Always start from first descriptor */ + hc_dma &= ~HCDMA_CTD_MASK; + writel(hc_dma, hsotg->regs + HCDMA(chan->hc_num)); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "Wrote %08x to HCDMA(%d)\n", + hc_dma, chan->hc_num); + + hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); + hcchar &= ~HCCHAR_MULTICNT_MASK; + hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT & + HCCHAR_MULTICNT_MASK; + + if (hcchar & HCCHAR_CHDIS) + dev_warn(hsotg->dev, + "%s: chdis set, channel %d, hcchar 0x%08x\n", + __func__, chan->hc_num, hcchar); + + /* Set host channel enable after all other setup is complete */ + hcchar |= HCCHAR_CHENA; + hcchar &= ~HCCHAR_CHDIS; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, " Multi Cnt: %d\n", + (hcchar & HCCHAR_MULTICNT_MASK) >> + HCCHAR_MULTICNT_SHIFT); + + writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num)); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar, + chan->hc_num); + + chan->xfer_started = 1; + chan->requests++; +} + +/** + * dwc2_hc_continue_transfer() - Continues a data transfer that was started by + * a previous call to dwc2_hc_start_transfer() + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Information needed to initialize the host channel + * + * The caller must ensure there is sufficient space in the request queue and Tx + * Data FIFO. This function should only be called in Slave mode. In DMA mode, + * the controller acts autonomously to complete transfers programmed to a host + * channel. + * + * For an OUT transfer, a new data packet is loaded into the appropriate FIFO + * if there is any data remaining to be queued. For an IN transfer, another + * data packet is always requested. For the SETUP phase of a control transfer, + * this function does nothing. + * + * Return: 1 if a new request is queued, 0 if no more requests are required + * for this transfer + */ +int dwc2_hc_continue_transfer(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, + chan->hc_num); + + if (chan->do_split) + /* SPLITs always queue just once per channel */ + return 0; + + if (chan->data_pid_start == DWC2_HC_PID_SETUP) + /* SETUPs are queued only once since they can't be NAK'd */ + return 0; + + if (chan->ep_is_in) { + /* + * Always queue another request for other IN transfers. If + * back-to-back INs are issued and NAKs are received for both, + * the driver may still be processing the first NAK when the + * second NAK is received. When the interrupt handler clears + * the NAK interrupt for the first NAK, the second NAK will + * not be seen. So we can't depend on the NAK interrupt + * handler to requeue a NAK'd request. Instead, IN requests + * are issued each time this function is called. When the + * transfer completes, the extra requests for the channel will + * be flushed. + */ + u32 hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); + + dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar); + hcchar |= HCCHAR_CHENA; + hcchar &= ~HCCHAR_CHDIS; + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, " IN xfer: hcchar = 0x%08x\n", + hcchar); + writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num)); + chan->requests++; + return 1; + } + + /* OUT transfers */ + + if (chan->xfer_count < chan->xfer_len) { + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) { + u32 hcchar = readl(hsotg->regs + + HCCHAR(chan->hc_num)); + + dwc2_hc_set_even_odd_frame(hsotg, chan, + &hcchar); + } + + /* Load OUT packet into the appropriate Tx FIFO */ + dwc2_hc_write_packet(hsotg, chan); + chan->requests++; + return 1; + } + + return 0; +} + +/** + * dwc2_hc_do_ping() - Starts a PING transfer + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Information needed to initialize the host channel + * + * This function should only be called in Slave mode. The Do Ping bit is set in + * the HCTSIZ register, then the channel is enabled. + */ +void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan) +{ + u32 hcchar; + u32 hctsiz; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "%s: Channel %d\n", __func__, + chan->hc_num); + + + hctsiz = TSIZ_DOPNG; + hctsiz |= 1 << TSIZ_PKTCNT_SHIFT; + writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num)); + + hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); + hcchar |= HCCHAR_CHENA; + hcchar &= ~HCCHAR_CHDIS; + writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num)); +} + +/** + * dwc2_calc_frame_interval() - Calculates the correct frame Interval value for + * the HFIR register according to PHY type and speed + * + * @hsotg: Programming view of DWC_otg controller + * + * NOTE: The caller can modify the value of the HFIR register only after the + * Port Enable bit of the Host Port Control and Status register (HPRT.EnaPort) + * has been set + */ +u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg) +{ + u32 usbcfg; + u32 hprt0; + int clock = 60; /* default value */ + + usbcfg = readl(hsotg->regs + GUSBCFG); + hprt0 = readl(hsotg->regs + HPRT0); + + if (!(usbcfg & GUSBCFG_PHYSEL) && (usbcfg & GUSBCFG_ULPI_UTMI_SEL) && + !(usbcfg & GUSBCFG_PHYIF16)) + clock = 60; + if ((usbcfg & GUSBCFG_PHYSEL) && hsotg->hw_params.fs_phy_type == + GHWCFG2_FS_PHY_TYPE_SHARED_ULPI) + clock = 48; + if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && + !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16)) + clock = 30; + if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && + !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && !(usbcfg & GUSBCFG_PHYIF16)) + clock = 60; + if ((usbcfg & GUSBCFG_PHY_LP_CLK_SEL) && !(usbcfg & GUSBCFG_PHYSEL) && + !(usbcfg & GUSBCFG_ULPI_UTMI_SEL) && (usbcfg & GUSBCFG_PHYIF16)) + clock = 48; + if ((usbcfg & GUSBCFG_PHYSEL) && !(usbcfg & GUSBCFG_PHYIF16) && + hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_SHARED_UTMI) + clock = 48; + if ((usbcfg & GUSBCFG_PHYSEL) && + hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) + clock = 48; + + if ((hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT == HPRT0_SPD_HIGH_SPEED) + /* High speed case */ + return 125 * clock; + else + /* FS/LS case */ + return 1000 * clock; +} + +/** + * dwc2_read_packet() - Reads a packet from the Rx FIFO into the destination + * buffer + * + * @core_if: Programming view of DWC_otg controller + * @dest: Destination buffer for the packet + * @bytes: Number of bytes to copy to the destination + */ +void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes) +{ + u32 __iomem *fifo = hsotg->regs + HCFIFO(0); + u32 *data_buf = (u32 *)dest; + int word_count = (bytes + 3) / 4; + int i; + + /* + * Todo: Account for the case where dest is not dword aligned. This + * requires reading data from the FIFO into a u32 temp buffer, then + * moving it into the data buffer. + */ + + dev_vdbg(hsotg->dev, "%s(%p,%p,%d)\n", __func__, hsotg, dest, bytes); + + for (i = 0; i < word_count; i++, data_buf++) + *data_buf = readl(fifo); +} + +/** + * dwc2_dump_host_registers() - Prints the host registers + * + * @hsotg: Programming view of DWC_otg controller + * + * NOTE: This function will be removed once the peripheral controller code + * is integrated and the driver is stable + */ +void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg) +{ +#ifdef DEBUG + u32 __iomem *addr; + int i; + + dev_dbg(hsotg->dev, "Host Global Registers\n"); + addr = hsotg->regs + HCFG; + dev_dbg(hsotg->dev, "HCFG @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HFIR; + dev_dbg(hsotg->dev, "HFIR @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HFNUM; + dev_dbg(hsotg->dev, "HFNUM @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HPTXSTS; + dev_dbg(hsotg->dev, "HPTXSTS @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HAINT; + dev_dbg(hsotg->dev, "HAINT @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HAINTMSK; + dev_dbg(hsotg->dev, "HAINTMSK @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + if (hsotg->core_params->dma_desc_enable > 0) { + addr = hsotg->regs + HFLBADDR; + dev_dbg(hsotg->dev, "HFLBADDR @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + } + + addr = hsotg->regs + HPRT0; + dev_dbg(hsotg->dev, "HPRT0 @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + + for (i = 0; i < hsotg->core_params->host_channels; i++) { + dev_dbg(hsotg->dev, "Host Channel %d Specific Registers\n", i); + addr = hsotg->regs + HCCHAR(i); + dev_dbg(hsotg->dev, "HCCHAR @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HCSPLT(i); + dev_dbg(hsotg->dev, "HCSPLT @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HCINT(i); + dev_dbg(hsotg->dev, "HCINT @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HCINTMSK(i); + dev_dbg(hsotg->dev, "HCINTMSK @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HCTSIZ(i); + dev_dbg(hsotg->dev, "HCTSIZ @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HCDMA(i); + dev_dbg(hsotg->dev, "HCDMA @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + if (hsotg->core_params->dma_desc_enable > 0) { + addr = hsotg->regs + HCDMAB(i); + dev_dbg(hsotg->dev, "HCDMAB @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + } + } +#endif +} + +/** + * dwc2_dump_global_registers() - Prints the core global registers + * + * @hsotg: Programming view of DWC_otg controller + * + * NOTE: This function will be removed once the peripheral controller code + * is integrated and the driver is stable + */ +void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg) +{ +#ifdef DEBUG + u32 __iomem *addr; + + dev_dbg(hsotg->dev, "Core Global Registers\n"); + addr = hsotg->regs + GOTGCTL; + dev_dbg(hsotg->dev, "GOTGCTL @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GOTGINT; + dev_dbg(hsotg->dev, "GOTGINT @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GAHBCFG; + dev_dbg(hsotg->dev, "GAHBCFG @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GUSBCFG; + dev_dbg(hsotg->dev, "GUSBCFG @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GRSTCTL; + dev_dbg(hsotg->dev, "GRSTCTL @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GINTSTS; + dev_dbg(hsotg->dev, "GINTSTS @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GINTMSK; + dev_dbg(hsotg->dev, "GINTMSK @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GRXSTSR; + dev_dbg(hsotg->dev, "GRXSTSR @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GRXFSIZ; + dev_dbg(hsotg->dev, "GRXFSIZ @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GNPTXFSIZ; + dev_dbg(hsotg->dev, "GNPTXFSIZ @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GNPTXSTS; + dev_dbg(hsotg->dev, "GNPTXSTS @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GI2CCTL; + dev_dbg(hsotg->dev, "GI2CCTL @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GPVNDCTL; + dev_dbg(hsotg->dev, "GPVNDCTL @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GGPIO; + dev_dbg(hsotg->dev, "GGPIO @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GUID; + dev_dbg(hsotg->dev, "GUID @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GSNPSID; + dev_dbg(hsotg->dev, "GSNPSID @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GHWCFG1; + dev_dbg(hsotg->dev, "GHWCFG1 @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GHWCFG2; + dev_dbg(hsotg->dev, "GHWCFG2 @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GHWCFG3; + dev_dbg(hsotg->dev, "GHWCFG3 @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GHWCFG4; + dev_dbg(hsotg->dev, "GHWCFG4 @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GLPMCFG; + dev_dbg(hsotg->dev, "GLPMCFG @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GPWRDN; + dev_dbg(hsotg->dev, "GPWRDN @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + GDFIFOCFG; + dev_dbg(hsotg->dev, "GDFIFOCFG @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + addr = hsotg->regs + HPTXFSIZ; + dev_dbg(hsotg->dev, "HPTXFSIZ @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); + + addr = hsotg->regs + PCGCTL; + dev_dbg(hsotg->dev, "PCGCTL @0x%08lX : 0x%08X\n", + (unsigned long)addr, readl(addr)); +#endif +} + +/** + * dwc2_flush_tx_fifo() - Flushes a Tx FIFO + * + * @hsotg: Programming view of DWC_otg controller + * @num: Tx FIFO to flush + */ +void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num) +{ + u32 greset; + int count = 0; + + dev_vdbg(hsotg->dev, "Flush Tx FIFO %d\n", num); + + greset = GRSTCTL_TXFFLSH; + greset |= num << GRSTCTL_TXFNUM_SHIFT & GRSTCTL_TXFNUM_MASK; + writel(greset, hsotg->regs + GRSTCTL); + + do { + greset = readl(hsotg->regs + GRSTCTL); + if (++count > 10000) { + dev_warn(hsotg->dev, + "%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n", + __func__, greset, + readl(hsotg->regs + GNPTXSTS)); + break; + } + udelay(1); + } while (greset & GRSTCTL_TXFFLSH); + + /* Wait for at least 3 PHY Clocks */ + udelay(1); +} + +/** + * dwc2_flush_rx_fifo() - Flushes the Rx FIFO + * + * @hsotg: Programming view of DWC_otg controller + */ +void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg) +{ + u32 greset; + int count = 0; + + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + greset = GRSTCTL_RXFFLSH; + writel(greset, hsotg->regs + GRSTCTL); + + do { + greset = readl(hsotg->regs + GRSTCTL); + if (++count > 10000) { + dev_warn(hsotg->dev, "%s() HANG! GRSTCTL=%0x\n", + __func__, greset); + break; + } + udelay(1); + } while (greset & GRSTCTL_RXFFLSH); + + /* Wait for at least 3 PHY Clocks */ + udelay(1); +} + +#define DWC2_OUT_OF_BOUNDS(a, b, c) ((a) < (b) || (a) > (c)) + +/* Parameter access functions */ +void dwc2_set_param_otg_cap(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + + switch (val) { + case DWC2_CAP_PARAM_HNP_SRP_CAPABLE: + if (hsotg->hw_params.op_mode != GHWCFG2_OP_MODE_HNP_SRP_CAPABLE) + valid = 0; + break; + case DWC2_CAP_PARAM_SRP_ONLY_CAPABLE: + switch (hsotg->hw_params.op_mode) { + case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE: + case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE: + case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE: + case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST: + break; + default: + valid = 0; + break; + } + break; + case DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE: + /* always valid */ + break; + default: + valid = 0; + break; + } + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for otg_cap parameter. Check HW configuration.\n", + val); + switch (hsotg->hw_params.op_mode) { + case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE: + val = DWC2_CAP_PARAM_HNP_SRP_CAPABLE; + break; + case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE: + case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE: + case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST: + val = DWC2_CAP_PARAM_SRP_ONLY_CAPABLE; + break; + default: + val = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE; + break; + } + dev_dbg(hsotg->dev, "Setting otg_cap to %d\n", val); + } + + hsotg->core_params->otg_cap = val; +} + +void dwc2_set_param_dma_enable(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + + if (val > 0 && hsotg->hw_params.arch == GHWCFG2_SLAVE_ONLY_ARCH) + valid = 0; + if (val < 0) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for dma_enable parameter. Check HW configuration.\n", + val); + val = hsotg->hw_params.arch != GHWCFG2_SLAVE_ONLY_ARCH; + dev_dbg(hsotg->dev, "Setting dma_enable to %d\n", val); + } + + hsotg->core_params->dma_enable = val; +} + +void dwc2_set_param_dma_desc_enable(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + + if (val > 0 && (hsotg->core_params->dma_enable <= 0 || + !hsotg->hw_params.dma_desc_enable)) + valid = 0; + if (val < 0) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for dma_desc_enable parameter. Check HW configuration.\n", + val); + val = (hsotg->core_params->dma_enable > 0 && + hsotg->hw_params.dma_desc_enable); + dev_dbg(hsotg->dev, "Setting dma_desc_enable to %d\n", val); + } + + hsotg->core_params->dma_desc_enable = val; +} + +void dwc2_set_param_host_support_fs_ls_low_power(struct dwc2_hsotg *hsotg, + int val) +{ + if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, + "Wrong value for host_support_fs_low_power\n"); + dev_err(hsotg->dev, + "host_support_fs_low_power must be 0 or 1\n"); + } + val = 0; + dev_dbg(hsotg->dev, + "Setting host_support_fs_low_power to %d\n", val); + } + + hsotg->core_params->host_support_fs_ls_low_power = val; +} + +void dwc2_set_param_enable_dynamic_fifo(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + + if (val > 0 && !hsotg->hw_params.enable_dynamic_fifo) + valid = 0; + if (val < 0) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for enable_dynamic_fifo parameter. Check HW configuration.\n", + val); + val = hsotg->hw_params.enable_dynamic_fifo; + dev_dbg(hsotg->dev, "Setting enable_dynamic_fifo to %d\n", val); + } + + hsotg->core_params->enable_dynamic_fifo = val; +} + +void dwc2_set_param_host_rx_fifo_size(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + + if (val < 16 || val > hsotg->hw_params.host_rx_fifo_size) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for host_rx_fifo_size. Check HW configuration.\n", + val); + val = hsotg->hw_params.host_rx_fifo_size; + dev_dbg(hsotg->dev, "Setting host_rx_fifo_size to %d\n", val); + } + + hsotg->core_params->host_rx_fifo_size = val; +} + +void dwc2_set_param_host_nperio_tx_fifo_size(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + + if (val < 16 || val > hsotg->hw_params.host_nperio_tx_fifo_size) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for host_nperio_tx_fifo_size. Check HW configuration.\n", + val); + val = hsotg->hw_params.host_nperio_tx_fifo_size; + dev_dbg(hsotg->dev, "Setting host_nperio_tx_fifo_size to %d\n", + val); + } + + hsotg->core_params->host_nperio_tx_fifo_size = val; +} + +void dwc2_set_param_host_perio_tx_fifo_size(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + + if (val < 16 || val > hsotg->hw_params.host_perio_tx_fifo_size) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for host_perio_tx_fifo_size. Check HW configuration.\n", + val); + val = hsotg->hw_params.host_perio_tx_fifo_size; + dev_dbg(hsotg->dev, "Setting host_perio_tx_fifo_size to %d\n", + val); + } + + hsotg->core_params->host_perio_tx_fifo_size = val; +} + +void dwc2_set_param_max_transfer_size(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + + if (val < 2047 || val > hsotg->hw_params.max_transfer_size) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for max_transfer_size. Check HW configuration.\n", + val); + val = hsotg->hw_params.max_transfer_size; + dev_dbg(hsotg->dev, "Setting max_transfer_size to %d\n", val); + } + + hsotg->core_params->max_transfer_size = val; +} + +void dwc2_set_param_max_packet_count(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + + if (val < 15 || val > hsotg->hw_params.max_packet_count) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for max_packet_count. Check HW configuration.\n", + val); + val = hsotg->hw_params.max_packet_count; + dev_dbg(hsotg->dev, "Setting max_packet_count to %d\n", val); + } + + hsotg->core_params->max_packet_count = val; +} + +void dwc2_set_param_host_channels(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + + if (val < 1 || val > hsotg->hw_params.host_channels) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for host_channels. Check HW configuration.\n", + val); + val = hsotg->hw_params.host_channels; + dev_dbg(hsotg->dev, "Setting host_channels to %d\n", val); + } + + hsotg->core_params->host_channels = val; +} + +void dwc2_set_param_phy_type(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 0; + u32 hs_phy_type, fs_phy_type; + + if (DWC2_OUT_OF_BOUNDS(val, DWC2_PHY_TYPE_PARAM_FS, + DWC2_PHY_TYPE_PARAM_ULPI)) { + if (val >= 0) { + dev_err(hsotg->dev, "Wrong value for phy_type\n"); + dev_err(hsotg->dev, "phy_type must be 0, 1 or 2\n"); + } + + valid = 0; + } + + hs_phy_type = hsotg->hw_params.hs_phy_type; + fs_phy_type = hsotg->hw_params.fs_phy_type; + if (val == DWC2_PHY_TYPE_PARAM_UTMI && + (hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI || + hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI_ULPI)) + valid = 1; + else if (val == DWC2_PHY_TYPE_PARAM_ULPI && + (hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI || + hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI_ULPI)) + valid = 1; + else if (val == DWC2_PHY_TYPE_PARAM_FS && + fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) + valid = 1; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for phy_type. Check HW configuration.\n", + val); + val = DWC2_PHY_TYPE_PARAM_FS; + if (hs_phy_type != GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED) { + if (hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI || + hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI_ULPI) + val = DWC2_PHY_TYPE_PARAM_UTMI; + else + val = DWC2_PHY_TYPE_PARAM_ULPI; + } + dev_dbg(hsotg->dev, "Setting phy_type to %d\n", val); + } + + hsotg->core_params->phy_type = val; +} + +static int dwc2_get_param_phy_type(struct dwc2_hsotg *hsotg) +{ + return hsotg->core_params->phy_type; +} + +void dwc2_set_param_speed(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + + if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, "Wrong value for speed parameter\n"); + dev_err(hsotg->dev, "max_speed parameter must be 0 or 1\n"); + } + valid = 0; + } + + if (val == DWC2_SPEED_PARAM_HIGH && + dwc2_get_param_phy_type(hsotg) == DWC2_PHY_TYPE_PARAM_FS) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for speed parameter. Check HW configuration.\n", + val); + val = dwc2_get_param_phy_type(hsotg) == DWC2_PHY_TYPE_PARAM_FS ? + DWC2_SPEED_PARAM_FULL : DWC2_SPEED_PARAM_HIGH; + dev_dbg(hsotg->dev, "Setting speed to %d\n", val); + } + + hsotg->core_params->speed = val; +} + +void dwc2_set_param_host_ls_low_power_phy_clk(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + + if (DWC2_OUT_OF_BOUNDS(val, DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ, + DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ)) { + if (val >= 0) { + dev_err(hsotg->dev, + "Wrong value for host_ls_low_power_phy_clk parameter\n"); + dev_err(hsotg->dev, + "host_ls_low_power_phy_clk must be 0 or 1\n"); + } + valid = 0; + } + + if (val == DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ && + dwc2_get_param_phy_type(hsotg) == DWC2_PHY_TYPE_PARAM_FS) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for host_ls_low_power_phy_clk. Check HW configuration.\n", + val); + val = dwc2_get_param_phy_type(hsotg) == DWC2_PHY_TYPE_PARAM_FS + ? DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ + : DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ; + dev_dbg(hsotg->dev, "Setting host_ls_low_power_phy_clk to %d\n", + val); + } + + hsotg->core_params->host_ls_low_power_phy_clk = val; +} + +void dwc2_set_param_phy_ulpi_ddr(struct dwc2_hsotg *hsotg, int val) +{ + if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, "Wrong value for phy_ulpi_ddr\n"); + dev_err(hsotg->dev, "phy_upli_ddr must be 0 or 1\n"); + } + val = 0; + dev_dbg(hsotg->dev, "Setting phy_upli_ddr to %d\n", val); + } + + hsotg->core_params->phy_ulpi_ddr = val; +} + +void dwc2_set_param_phy_ulpi_ext_vbus(struct dwc2_hsotg *hsotg, int val) +{ + if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, + "Wrong value for phy_ulpi_ext_vbus\n"); + dev_err(hsotg->dev, + "phy_ulpi_ext_vbus must be 0 or 1\n"); + } + val = 0; + dev_dbg(hsotg->dev, "Setting phy_ulpi_ext_vbus to %d\n", val); + } + + hsotg->core_params->phy_ulpi_ext_vbus = val; +} + +void dwc2_set_param_phy_utmi_width(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 0; + + switch (hsotg->hw_params.utmi_phy_data_width) { + case GHWCFG4_UTMI_PHY_DATA_WIDTH_8: + valid = (val == 8); + break; + case GHWCFG4_UTMI_PHY_DATA_WIDTH_16: + valid = (val == 16); + break; + case GHWCFG4_UTMI_PHY_DATA_WIDTH_8_OR_16: + valid = (val == 8 || val == 16); + break; + } + + if (!valid) { + if (val >= 0) { + dev_err(hsotg->dev, + "%d invalid for phy_utmi_width. Check HW configuration.\n", + val); + } + val = (hsotg->hw_params.utmi_phy_data_width == + GHWCFG4_UTMI_PHY_DATA_WIDTH_8) ? 8 : 16; + dev_dbg(hsotg->dev, "Setting phy_utmi_width to %d\n", val); + } + + hsotg->core_params->phy_utmi_width = val; +} + +void dwc2_set_param_ulpi_fs_ls(struct dwc2_hsotg *hsotg, int val) +{ + if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, "Wrong value for ulpi_fs_ls\n"); + dev_err(hsotg->dev, "ulpi_fs_ls must be 0 or 1\n"); + } + val = 0; + dev_dbg(hsotg->dev, "Setting ulpi_fs_ls to %d\n", val); + } + + hsotg->core_params->ulpi_fs_ls = val; +} + +void dwc2_set_param_ts_dline(struct dwc2_hsotg *hsotg, int val) +{ + if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, "Wrong value for ts_dline\n"); + dev_err(hsotg->dev, "ts_dline must be 0 or 1\n"); + } + val = 0; + dev_dbg(hsotg->dev, "Setting ts_dline to %d\n", val); + } + + hsotg->core_params->ts_dline = val; +} + +void dwc2_set_param_i2c_enable(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + + if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, "Wrong value for i2c_enable\n"); + dev_err(hsotg->dev, "i2c_enable must be 0 or 1\n"); + } + + valid = 0; + } + + if (val == 1 && !(hsotg->hw_params.i2c_enable)) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for i2c_enable. Check HW configuration.\n", + val); + val = hsotg->hw_params.i2c_enable; + dev_dbg(hsotg->dev, "Setting i2c_enable to %d\n", val); + } + + hsotg->core_params->i2c_enable = val; +} + +void dwc2_set_param_en_multiple_tx_fifo(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + + if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, + "Wrong value for en_multiple_tx_fifo,\n"); + dev_err(hsotg->dev, + "en_multiple_tx_fifo must be 0 or 1\n"); + } + valid = 0; + } + + if (val == 1 && !hsotg->hw_params.en_multiple_tx_fifo) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for parameter en_multiple_tx_fifo. Check HW configuration.\n", + val); + val = hsotg->hw_params.en_multiple_tx_fifo; + dev_dbg(hsotg->dev, "Setting en_multiple_tx_fifo to %d\n", val); + } + + hsotg->core_params->en_multiple_tx_fifo = val; +} + +void dwc2_set_param_reload_ctl(struct dwc2_hsotg *hsotg, int val) +{ + int valid = 1; + + if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, + "'%d' invalid for parameter reload_ctl\n", val); + dev_err(hsotg->dev, "reload_ctl must be 0 or 1\n"); + } + valid = 0; + } + + if (val == 1 && hsotg->hw_params.snpsid < DWC2_CORE_REV_2_92a) + valid = 0; + + if (!valid) { + if (val >= 0) + dev_err(hsotg->dev, + "%d invalid for parameter reload_ctl. Check HW configuration.\n", + val); + val = hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_92a; + dev_dbg(hsotg->dev, "Setting reload_ctl to %d\n", val); + } + + hsotg->core_params->reload_ctl = val; +} + +void dwc2_set_param_ahbcfg(struct dwc2_hsotg *hsotg, int val) +{ + if (val != -1) + hsotg->core_params->ahbcfg = val; + else + hsotg->core_params->ahbcfg = GAHBCFG_HBSTLEN_INCR4 << + GAHBCFG_HBSTLEN_SHIFT; +} + +void dwc2_set_param_otg_ver(struct dwc2_hsotg *hsotg, int val) +{ + if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, + "'%d' invalid for parameter otg_ver\n", val); + dev_err(hsotg->dev, + "otg_ver must be 0 (for OTG 1.3 support) or 1 (for OTG 2.0 support)\n"); + } + val = 0; + dev_dbg(hsotg->dev, "Setting otg_ver to %d\n", val); + } + + hsotg->core_params->otg_ver = val; +} + +static void dwc2_set_param_uframe_sched(struct dwc2_hsotg *hsotg, int val) +{ + if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) { + if (val >= 0) { + dev_err(hsotg->dev, + "'%d' invalid for parameter uframe_sched\n", + val); + dev_err(hsotg->dev, "uframe_sched must be 0 or 1\n"); + } + val = 1; + dev_dbg(hsotg->dev, "Setting uframe_sched to %d\n", val); + } + + hsotg->core_params->uframe_sched = val; +} + +/* + * This function is called during module intialization to pass module parameters + * for the DWC_otg core. + */ +void dwc2_set_parameters(struct dwc2_hsotg *hsotg, + const struct dwc2_core_params *params) +{ + dev_dbg(hsotg->dev, "%s()\n", __func__); + + dwc2_set_param_otg_cap(hsotg, params->otg_cap); + dwc2_set_param_dma_enable(hsotg, params->dma_enable); + dwc2_set_param_dma_desc_enable(hsotg, params->dma_desc_enable); + dwc2_set_param_host_support_fs_ls_low_power(hsotg, + params->host_support_fs_ls_low_power); + dwc2_set_param_enable_dynamic_fifo(hsotg, + params->enable_dynamic_fifo); + dwc2_set_param_host_rx_fifo_size(hsotg, + params->host_rx_fifo_size); + dwc2_set_param_host_nperio_tx_fifo_size(hsotg, + params->host_nperio_tx_fifo_size); + dwc2_set_param_host_perio_tx_fifo_size(hsotg, + params->host_perio_tx_fifo_size); + dwc2_set_param_max_transfer_size(hsotg, + params->max_transfer_size); + dwc2_set_param_max_packet_count(hsotg, + params->max_packet_count); + dwc2_set_param_host_channels(hsotg, params->host_channels); + dwc2_set_param_phy_type(hsotg, params->phy_type); + dwc2_set_param_speed(hsotg, params->speed); + dwc2_set_param_host_ls_low_power_phy_clk(hsotg, + params->host_ls_low_power_phy_clk); + dwc2_set_param_phy_ulpi_ddr(hsotg, params->phy_ulpi_ddr); + dwc2_set_param_phy_ulpi_ext_vbus(hsotg, + params->phy_ulpi_ext_vbus); + dwc2_set_param_phy_utmi_width(hsotg, params->phy_utmi_width); + dwc2_set_param_ulpi_fs_ls(hsotg, params->ulpi_fs_ls); + dwc2_set_param_ts_dline(hsotg, params->ts_dline); + dwc2_set_param_i2c_enable(hsotg, params->i2c_enable); + dwc2_set_param_en_multiple_tx_fifo(hsotg, + params->en_multiple_tx_fifo); + dwc2_set_param_reload_ctl(hsotg, params->reload_ctl); + dwc2_set_param_ahbcfg(hsotg, params->ahbcfg); + dwc2_set_param_otg_ver(hsotg, params->otg_ver); + dwc2_set_param_uframe_sched(hsotg, params->uframe_sched); +} + +/** + * During device initialization, read various hardware configuration + * registers and interpret the contents. + */ +int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) +{ + struct dwc2_hw_params *hw = &hsotg->hw_params; + unsigned width; + u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4; + u32 hptxfsiz, grxfsiz, gnptxfsiz; + u32 gusbcfg; + + /* + * Attempt to ensure this device is really a DWC_otg Controller. + * Read and verify the GSNPSID register contents. The value should be + * 0x45f42xxx or 0x45f43xxx, which corresponds to either "OT2" or "OT3", + * as in "OTG version 2.xx" or "OTG version 3.xx". + */ + hw->snpsid = readl(hsotg->regs + GSNPSID); + if ((hw->snpsid & 0xfffff000) != 0x4f542000 && + (hw->snpsid & 0xfffff000) != 0x4f543000) { + dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n", + hw->snpsid); + return -ENODEV; + } + + dev_dbg(hsotg->dev, "Core Release: %1x.%1x%1x%1x (snpsid=%x)\n", + hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf, + hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid); + + hwcfg1 = readl(hsotg->regs + GHWCFG1); + hwcfg2 = readl(hsotg->regs + GHWCFG2); + hwcfg3 = readl(hsotg->regs + GHWCFG3); + hwcfg4 = readl(hsotg->regs + GHWCFG4); + grxfsiz = readl(hsotg->regs + GRXFSIZ); + + dev_dbg(hsotg->dev, "hwcfg1=%08x\n", hwcfg1); + dev_dbg(hsotg->dev, "hwcfg2=%08x\n", hwcfg2); + dev_dbg(hsotg->dev, "hwcfg3=%08x\n", hwcfg3); + dev_dbg(hsotg->dev, "hwcfg4=%08x\n", hwcfg4); + dev_dbg(hsotg->dev, "grxfsiz=%08x\n", grxfsiz); + + /* Force host mode to get HPTXFSIZ / GNPTXFSIZ exact power on value */ + gusbcfg = readl(hsotg->regs + GUSBCFG); + gusbcfg |= GUSBCFG_FORCEHOSTMODE; + writel(gusbcfg, hsotg->regs + GUSBCFG); + usleep_range(100000, 150000); + + gnptxfsiz = readl(hsotg->regs + GNPTXFSIZ); + hptxfsiz = readl(hsotg->regs + HPTXFSIZ); + dev_dbg(hsotg->dev, "gnptxfsiz=%08x\n", gnptxfsiz); + dev_dbg(hsotg->dev, "hptxfsiz=%08x\n", hptxfsiz); + gusbcfg = readl(hsotg->regs + GUSBCFG); + gusbcfg &= ~GUSBCFG_FORCEHOSTMODE; + writel(gusbcfg, hsotg->regs + GUSBCFG); + usleep_range(100000, 150000); + + /* hwcfg2 */ + hw->op_mode = (hwcfg2 & GHWCFG2_OP_MODE_MASK) >> + GHWCFG2_OP_MODE_SHIFT; + hw->arch = (hwcfg2 & GHWCFG2_ARCHITECTURE_MASK) >> + GHWCFG2_ARCHITECTURE_SHIFT; + hw->enable_dynamic_fifo = !!(hwcfg2 & GHWCFG2_DYNAMIC_FIFO); + hw->host_channels = 1 + ((hwcfg2 & GHWCFG2_NUM_HOST_CHAN_MASK) >> + GHWCFG2_NUM_HOST_CHAN_SHIFT); + hw->hs_phy_type = (hwcfg2 & GHWCFG2_HS_PHY_TYPE_MASK) >> + GHWCFG2_HS_PHY_TYPE_SHIFT; + hw->fs_phy_type = (hwcfg2 & GHWCFG2_FS_PHY_TYPE_MASK) >> + GHWCFG2_FS_PHY_TYPE_SHIFT; + hw->num_dev_ep = (hwcfg2 & GHWCFG2_NUM_DEV_EP_MASK) >> + GHWCFG2_NUM_DEV_EP_SHIFT; + hw->nperio_tx_q_depth = + (hwcfg2 & GHWCFG2_NONPERIO_TX_Q_DEPTH_MASK) >> + GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT << 1; + hw->host_perio_tx_q_depth = + (hwcfg2 & GHWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK) >> + GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT << 1; + hw->dev_token_q_depth = + (hwcfg2 & GHWCFG2_DEV_TOKEN_Q_DEPTH_MASK) >> + GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT; + + /* hwcfg3 */ + width = (hwcfg3 & GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK) >> + GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT; + hw->max_transfer_size = (1 << (width + 11)) - 1; + /* + * Clip max_transfer_size to 65535. dwc2_hc_setup_align_buf() allocates + * coherent buffers with this size, and if it's too large we can + * exhaust the coherent DMA pool. + */ + if (hw->max_transfer_size > 65535) + hw->max_transfer_size = 65535; + width = (hwcfg3 & GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK) >> + GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT; + hw->max_packet_count = (1 << (width + 4)) - 1; + hw->i2c_enable = !!(hwcfg3 & GHWCFG3_I2C); + hw->total_fifo_size = (hwcfg3 & GHWCFG3_DFIFO_DEPTH_MASK) >> + GHWCFG3_DFIFO_DEPTH_SHIFT; + + /* hwcfg4 */ + hw->en_multiple_tx_fifo = !!(hwcfg4 & GHWCFG4_DED_FIFO_EN); + hw->num_dev_perio_in_ep = (hwcfg4 & GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK) >> + GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT; + hw->dma_desc_enable = !!(hwcfg4 & GHWCFG4_DESC_DMA); + hw->power_optimized = !!(hwcfg4 & GHWCFG4_POWER_OPTIMIZ); + hw->utmi_phy_data_width = (hwcfg4 & GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK) >> + GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT; + + /* fifo sizes */ + hw->host_rx_fifo_size = (grxfsiz & GRXFSIZ_DEPTH_MASK) >> + GRXFSIZ_DEPTH_SHIFT; + hw->host_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >> + FIFOSIZE_DEPTH_SHIFT; + hw->host_perio_tx_fifo_size = (hptxfsiz & FIFOSIZE_DEPTH_MASK) >> + FIFOSIZE_DEPTH_SHIFT; + + dev_dbg(hsotg->dev, "Detected values from hardware:\n"); + dev_dbg(hsotg->dev, " op_mode=%d\n", + hw->op_mode); + dev_dbg(hsotg->dev, " arch=%d\n", + hw->arch); + dev_dbg(hsotg->dev, " dma_desc_enable=%d\n", + hw->dma_desc_enable); + dev_dbg(hsotg->dev, " power_optimized=%d\n", + hw->power_optimized); + dev_dbg(hsotg->dev, " i2c_enable=%d\n", + hw->i2c_enable); + dev_dbg(hsotg->dev, " hs_phy_type=%d\n", + hw->hs_phy_type); + dev_dbg(hsotg->dev, " fs_phy_type=%d\n", + hw->fs_phy_type); + dev_dbg(hsotg->dev, " utmi_phy_data_wdith=%d\n", + hw->utmi_phy_data_width); + dev_dbg(hsotg->dev, " num_dev_ep=%d\n", + hw->num_dev_ep); + dev_dbg(hsotg->dev, " num_dev_perio_in_ep=%d\n", + hw->num_dev_perio_in_ep); + dev_dbg(hsotg->dev, " host_channels=%d\n", + hw->host_channels); + dev_dbg(hsotg->dev, " max_transfer_size=%d\n", + hw->max_transfer_size); + dev_dbg(hsotg->dev, " max_packet_count=%d\n", + hw->max_packet_count); + dev_dbg(hsotg->dev, " nperio_tx_q_depth=0x%0x\n", + hw->nperio_tx_q_depth); + dev_dbg(hsotg->dev, " host_perio_tx_q_depth=0x%0x\n", + hw->host_perio_tx_q_depth); + dev_dbg(hsotg->dev, " dev_token_q_depth=0x%0x\n", + hw->dev_token_q_depth); + dev_dbg(hsotg->dev, " enable_dynamic_fifo=%d\n", + hw->enable_dynamic_fifo); + dev_dbg(hsotg->dev, " en_multiple_tx_fifo=%d\n", + hw->en_multiple_tx_fifo); + dev_dbg(hsotg->dev, " total_fifo_size=%d\n", + hw->total_fifo_size); + dev_dbg(hsotg->dev, " host_rx_fifo_size=%d\n", + hw->host_rx_fifo_size); + dev_dbg(hsotg->dev, " host_nperio_tx_fifo_size=%d\n", + hw->host_nperio_tx_fifo_size); + dev_dbg(hsotg->dev, " host_perio_tx_fifo_size=%d\n", + hw->host_perio_tx_fifo_size); + dev_dbg(hsotg->dev, "\n"); + + return 0; +} + +u16 dwc2_get_otg_version(struct dwc2_hsotg *hsotg) +{ + return hsotg->core_params->otg_ver == 1 ? 0x0200 : 0x0103; +} + +bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg) +{ + if (readl(hsotg->regs + GSNPSID) == 0xffffffff) + return false; + else + return true; +} + +/** + * dwc2_enable_global_interrupts() - Enables the controller's Global + * Interrupt in the AHB Config register + * + * @hsotg: Programming view of DWC_otg controller + */ +void dwc2_enable_global_interrupts(struct dwc2_hsotg *hsotg) +{ + u32 ahbcfg = readl(hsotg->regs + GAHBCFG); + + ahbcfg |= GAHBCFG_GLBL_INTR_EN; + writel(ahbcfg, hsotg->regs + GAHBCFG); +} + +/** + * dwc2_disable_global_interrupts() - Disables the controller's Global + * Interrupt in the AHB Config register + * + * @hsotg: Programming view of DWC_otg controller + */ +void dwc2_disable_global_interrupts(struct dwc2_hsotg *hsotg) +{ + u32 ahbcfg = readl(hsotg->regs + GAHBCFG); + + ahbcfg &= ~GAHBCFG_GLBL_INTR_EN; + writel(ahbcfg, hsotg->regs + GAHBCFG); +} + +MODULE_DESCRIPTION("DESIGNWARE HS OTG Core"); +MODULE_AUTHOR("Synopsys, Inc."); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/kernel/drivers/usb/dwc2/core.h b/kernel/drivers/usb/dwc2/core.h new file mode 100644 index 000000000..836c012c7 --- /dev/null +++ b/kernel/drivers/usb/dwc2/core.h @@ -0,0 +1,1039 @@ +/* + * core.h - DesignWare HS OTG Controller common declarations + * + * Copyright (C) 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __DWC2_CORE_H__ +#define __DWC2_CORE_H__ + +#include <linux/phy/phy.h> +#include <linux/regulator/consumer.h> +#include <linux/usb/gadget.h> +#include <linux/usb/otg.h> +#include <linux/usb/phy.h> +#include "hw.h" + +#ifdef DWC2_LOG_WRITES +static inline void do_write(u32 value, void *addr) +{ + writel(value, addr); + pr_info("INFO:: wrote %08x to %p\n", value, addr); +} + +#undef writel +#define writel(v, a) do_write(v, a) +#endif + +/* Maximum number of Endpoints/HostChannels */ +#define MAX_EPS_CHANNELS 16 + +/* s3c-hsotg declarations */ +static const char * const s3c_hsotg_supply_names[] = { + "vusb_d", /* digital USB supply, 1.2V */ + "vusb_a", /* analog USB supply, 1.1V */ +}; + +/* + * EP0_MPS_LIMIT + * + * Unfortunately there seems to be a limit of the amount of data that can + * be transferred by IN transactions on EP0. This is either 127 bytes or 3 + * packets (which practically means 1 packet and 63 bytes of data) when the + * MPS is set to 64. + * + * This means if we are wanting to move >127 bytes of data, we need to + * split the transactions up, but just doing one packet at a time does + * not work (this may be an implicit DATA0 PID on first packet of the + * transaction) and doing 2 packets is outside the controller's limits. + * + * If we try to lower the MPS size for EP0, then no transfers work properly + * for EP0, and the system will fail basic enumeration. As no cause for this + * has currently been found, we cannot support any large IN transfers for + * EP0. + */ +#define EP0_MPS_LIMIT 64 + +struct dwc2_hsotg; +struct s3c_hsotg_req; + +/** + * struct s3c_hsotg_ep - driver endpoint definition. + * @ep: The gadget layer representation of the endpoint. + * @name: The driver generated name for the endpoint. + * @queue: Queue of requests for this endpoint. + * @parent: Reference back to the parent device structure. + * @req: The current request that the endpoint is processing. This is + * used to indicate an request has been loaded onto the endpoint + * and has yet to be completed (maybe due to data move, or simply + * awaiting an ack from the core all the data has been completed). + * @debugfs: File entry for debugfs file for this endpoint. + * @lock: State lock to protect contents of endpoint. + * @dir_in: Set to true if this endpoint is of the IN direction, which + * means that it is sending data to the Host. + * @index: The index for the endpoint registers. + * @mc: Multi Count - number of transactions per microframe + * @interval - Interval for periodic endpoints + * @name: The name array passed to the USB core. + * @halted: Set if the endpoint has been halted. + * @periodic: Set if this is a periodic ep, such as Interrupt + * @isochronous: Set if this is a isochronous ep + * @send_zlp: Set if we need to send a zero-length packet. + * @total_data: The total number of data bytes done. + * @fifo_size: The size of the FIFO (for periodic IN endpoints) + * @fifo_load: The amount of data loaded into the FIFO (periodic IN) + * @last_load: The offset of data for the last start of request. + * @size_loaded: The last loaded size for DxEPTSIZE for periodic IN + * + * This is the driver's state for each registered enpoint, allowing it + * to keep track of transactions that need doing. Each endpoint has a + * lock to protect the state, to try and avoid using an overall lock + * for the host controller as much as possible. + * + * For periodic IN endpoints, we have fifo_size and fifo_load to try + * and keep track of the amount of data in the periodic FIFO for each + * of these as we don't have a status register that tells us how much + * is in each of them. (note, this may actually be useless information + * as in shared-fifo mode periodic in acts like a single-frame packet + * buffer than a fifo) + */ +struct s3c_hsotg_ep { + struct usb_ep ep; + struct list_head queue; + struct dwc2_hsotg *parent; + struct s3c_hsotg_req *req; + struct dentry *debugfs; + + unsigned long total_data; + unsigned int size_loaded; + unsigned int last_load; + unsigned int fifo_load; + unsigned short fifo_size; + unsigned short fifo_index; + + unsigned char dir_in; + unsigned char index; + unsigned char mc; + unsigned char interval; + + unsigned int halted:1; + unsigned int periodic:1; + unsigned int isochronous:1; + unsigned int send_zlp:1; + + char name[10]; +}; + +/** + * struct s3c_hsotg_req - data transfer request + * @req: The USB gadget request + * @queue: The list of requests for the endpoint this is queued for. + * @saved_req_buf: variable to save req.buf when bounce buffers are used. + */ +struct s3c_hsotg_req { + struct usb_request req; + struct list_head queue; + void *saved_req_buf; +}; + +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) +#define call_gadget(_hs, _entry) \ +do { \ + if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \ + (_hs)->driver && (_hs)->driver->_entry) { \ + spin_unlock(&_hs->lock); \ + (_hs)->driver->_entry(&(_hs)->gadget); \ + spin_lock(&_hs->lock); \ + } \ +} while (0) +#else +#define call_gadget(_hs, _entry) do {} while (0) +#endif + +struct dwc2_hsotg; +struct dwc2_host_chan; + +/* Device States */ +enum dwc2_lx_state { + DWC2_L0, /* On state */ + DWC2_L1, /* LPM sleep state */ + DWC2_L2, /* USB suspend state */ + DWC2_L3, /* Off state */ +}; + +/* + * Gadget periodic tx fifo sizes as used by legacy driver + * EP0 is not included + */ +#define DWC2_G_P_LEGACY_TX_FIFO_SIZE {256, 256, 256, 256, 768, 768, 768, \ + 768, 0, 0, 0, 0, 0, 0, 0} + +/* Gadget ep0 states */ +enum dwc2_ep0_state { + DWC2_EP0_SETUP, + DWC2_EP0_DATA_IN, + DWC2_EP0_DATA_OUT, + DWC2_EP0_STATUS_IN, + DWC2_EP0_STATUS_OUT, +}; + +/** + * struct dwc2_core_params - Parameters for configuring the core + * + * @otg_cap: Specifies the OTG capabilities. + * 0 - HNP and SRP capable + * 1 - SRP Only capable + * 2 - No HNP/SRP capable (always available) + * Defaults to best available option (0, 1, then 2) + * @otg_ver: OTG version supported + * 0 - 1.3 (default) + * 1 - 2.0 + * @dma_enable: Specifies whether to use slave or DMA mode for accessing + * the data FIFOs. The driver will automatically detect the + * value for this parameter if none is specified. + * 0 - Slave (always available) + * 1 - DMA (default, if available) + * @dma_desc_enable: When DMA mode is enabled, specifies whether to use + * address DMA mode or descriptor DMA mode for accessing + * the data FIFOs. The driver will automatically detect the + * value for this if none is specified. + * 0 - Address DMA + * 1 - Descriptor DMA (default, if available) + * @speed: Specifies the maximum speed of operation in host and + * device mode. The actual speed depends on the speed of + * the attached device and the value of phy_type. + * 0 - High Speed + * (default when phy_type is UTMI+ or ULPI) + * 1 - Full Speed + * (default when phy_type is Full Speed) + * @enable_dynamic_fifo: 0 - Use coreConsultant-specified FIFO size parameters + * 1 - Allow dynamic FIFO sizing (default, if available) + * @en_multiple_tx_fifo: Specifies whether dedicated per-endpoint transmit FIFOs + * are enabled + * @host_rx_fifo_size: Number of 4-byte words in the Rx FIFO in host mode when + * dynamic FIFO sizing is enabled + * 16 to 32768 + * Actual maximum value is autodetected and also + * the default. + * @host_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO + * in host mode when dynamic FIFO sizing is enabled + * 16 to 32768 + * Actual maximum value is autodetected and also + * the default. + * @host_perio_tx_fifo_size: Number of 4-byte words in the periodic Tx FIFO in + * host mode when dynamic FIFO sizing is enabled + * 16 to 32768 + * Actual maximum value is autodetected and also + * the default. + * @max_transfer_size: The maximum transfer size supported, in bytes + * 2047 to 65,535 + * Actual maximum value is autodetected and also + * the default. + * @max_packet_count: The maximum number of packets in a transfer + * 15 to 511 + * Actual maximum value is autodetected and also + * the default. + * @host_channels: The number of host channel registers to use + * 1 to 16 + * Actual maximum value is autodetected and also + * the default. + * @phy_type: Specifies the type of PHY interface to use. By default, + * the driver will automatically detect the phy_type. + * 0 - Full Speed Phy + * 1 - UTMI+ Phy + * 2 - ULPI Phy + * Defaults to best available option (2, 1, then 0) + * @phy_utmi_width: Specifies the UTMI+ Data Width (in bits). This parameter + * is applicable for a phy_type of UTMI+ or ULPI. (For a + * ULPI phy_type, this parameter indicates the data width + * between the MAC and the ULPI Wrapper.) Also, this + * parameter is applicable only if the OTG_HSPHY_WIDTH cC + * parameter was set to "8 and 16 bits", meaning that the + * core has been configured to work at either data path + * width. + * 8 or 16 (default 16 if available) + * @phy_ulpi_ddr: Specifies whether the ULPI operates at double or single + * data rate. This parameter is only applicable if phy_type + * is ULPI. + * 0 - single data rate ULPI interface with 8 bit wide + * data bus (default) + * 1 - double data rate ULPI interface with 4 bit wide + * data bus + * @phy_ulpi_ext_vbus: For a ULPI phy, specifies whether to use the internal or + * external supply to drive the VBus + * 0 - Internal supply (default) + * 1 - External supply + * @i2c_enable: Specifies whether to use the I2Cinterface for a full + * speed PHY. This parameter is only applicable if phy_type + * is FS. + * 0 - No (default) + * 1 - Yes + * @ulpi_fs_ls: Make ULPI phy operate in FS/LS mode only + * 0 - No (default) + * 1 - Yes + * @host_support_fs_ls_low_power: Specifies whether low power mode is supported + * when attached to a Full Speed or Low Speed device in + * host mode. + * 0 - Don't support low power mode (default) + * 1 - Support low power mode + * @host_ls_low_power_phy_clk: Specifies the PHY clock rate in low power mode + * when connected to a Low Speed device in host + * mode. This parameter is applicable only if + * host_support_fs_ls_low_power is enabled. + * 0 - 48 MHz + * (default when phy_type is UTMI+ or ULPI) + * 1 - 6 MHz + * (default when phy_type is Full Speed) + * @ts_dline: Enable Term Select Dline pulsing + * 0 - No (default) + * 1 - Yes + * @reload_ctl: Allow dynamic reloading of HFIR register during runtime + * 0 - No (default for core < 2.92a) + * 1 - Yes (default for core >= 2.92a) + * @ahbcfg: This field allows the default value of the GAHBCFG + * register to be overridden + * -1 - GAHBCFG value will be set to 0x06 + * (INCR4, default) + * all others - GAHBCFG value will be overridden with + * this value + * Not all bits can be controlled like this, the + * bits defined by GAHBCFG_CTRL_MASK are controlled + * by the driver and are ignored in this + * configuration value. + * @uframe_sched: True to enable the microframe scheduler + * + * The following parameters may be specified when starting the module. These + * parameters define how the DWC_otg controller should be configured. A + * value of -1 (or any other out of range value) for any parameter means + * to read the value from hardware (if possible) or use the builtin + * default described above. + */ +struct dwc2_core_params { + /* + * Don't add any non-int members here, this will break + * dwc2_set_all_params! + */ + int otg_cap; + int otg_ver; + int dma_enable; + int dma_desc_enable; + int speed; + int enable_dynamic_fifo; + int en_multiple_tx_fifo; + int host_rx_fifo_size; + int host_nperio_tx_fifo_size; + int host_perio_tx_fifo_size; + int max_transfer_size; + int max_packet_count; + int host_channels; + int phy_type; + int phy_utmi_width; + int phy_ulpi_ddr; + int phy_ulpi_ext_vbus; + int i2c_enable; + int ulpi_fs_ls; + int host_support_fs_ls_low_power; + int host_ls_low_power_phy_clk; + int ts_dline; + int reload_ctl; + int ahbcfg; + int uframe_sched; +}; + +/** + * struct dwc2_hw_params - Autodetected parameters. + * + * These parameters are the various parameters read from hardware + * registers during initialization. They typically contain the best + * supported or maximum value that can be configured in the + * corresponding dwc2_core_params value. + * + * The values that are not in dwc2_core_params are documented below. + * + * @op_mode Mode of Operation + * 0 - HNP- and SRP-Capable OTG (Host & Device) + * 1 - SRP-Capable OTG (Host & Device) + * 2 - Non-HNP and Non-SRP Capable OTG (Host & Device) + * 3 - SRP-Capable Device + * 4 - Non-OTG Device + * 5 - SRP-Capable Host + * 6 - Non-OTG Host + * @arch Architecture + * 0 - Slave only + * 1 - External DMA + * 2 - Internal DMA + * @power_optimized Are power optimizations enabled? + * @num_dev_ep Number of device endpoints available + * @num_dev_perio_in_ep Number of device periodic IN endpoints + * available + * @dev_token_q_depth Device Mode IN Token Sequence Learning Queue + * Depth + * 0 to 30 + * @host_perio_tx_q_depth + * Host Mode Periodic Request Queue Depth + * 2, 4 or 8 + * @nperio_tx_q_depth + * Non-Periodic Request Queue Depth + * 2, 4 or 8 + * @hs_phy_type High-speed PHY interface type + * 0 - High-speed interface not supported + * 1 - UTMI+ + * 2 - ULPI + * 3 - UTMI+ and ULPI + * @fs_phy_type Full-speed PHY interface type + * 0 - Full speed interface not supported + * 1 - Dedicated full speed interface + * 2 - FS pins shared with UTMI+ pins + * 3 - FS pins shared with ULPI pins + * @total_fifo_size: Total internal RAM for FIFOs (bytes) + * @utmi_phy_data_width UTMI+ PHY data width + * 0 - 8 bits + * 1 - 16 bits + * 2 - 8 or 16 bits + * @snpsid: Value from SNPSID register + */ +struct dwc2_hw_params { + unsigned op_mode:3; + unsigned arch:2; + unsigned dma_desc_enable:1; + unsigned enable_dynamic_fifo:1; + unsigned en_multiple_tx_fifo:1; + unsigned host_rx_fifo_size:16; + unsigned host_nperio_tx_fifo_size:16; + unsigned host_perio_tx_fifo_size:16; + unsigned nperio_tx_q_depth:3; + unsigned host_perio_tx_q_depth:3; + unsigned dev_token_q_depth:5; + unsigned max_transfer_size:26; + unsigned max_packet_count:11; + unsigned host_channels:5; + unsigned hs_phy_type:2; + unsigned fs_phy_type:2; + unsigned i2c_enable:1; + unsigned num_dev_ep:4; + unsigned num_dev_perio_in_ep:4; + unsigned total_fifo_size:16; + unsigned power_optimized:1; + unsigned utmi_phy_data_width:2; + u32 snpsid; +}; + +/* Size of control and EP0 buffers */ +#define DWC2_CTRL_BUFF_SIZE 8 + +/** + * struct dwc2_hsotg - Holds the state of the driver, including the non-periodic + * and periodic schedules + * + * These are common for both host and peripheral modes: + * + * @dev: The struct device pointer + * @regs: Pointer to controller regs + * @hw_params: Parameters that were autodetected from the + * hardware registers + * @core_params: Parameters that define how the core should be configured + * @op_state: The operational State, during transitions (a_host=> + * a_peripheral and b_device=>b_host) this may not match + * the core, but allows the software to determine + * transitions + * @dr_mode: Requested mode of operation, one of following: + * - USB_DR_MODE_PERIPHERAL + * - USB_DR_MODE_HOST + * - USB_DR_MODE_OTG + * @lock: Spinlock that protects all the driver data structures + * @priv: Stores a pointer to the struct usb_hcd + * @queuing_high_bandwidth: True if multiple packets of a high-bandwidth + * transfer are in process of being queued + * @srp_success: Stores status of SRP request in the case of a FS PHY + * with an I2C interface + * @wq_otg: Workqueue object used for handling of some interrupts + * @wf_otg: Work object for handling Connector ID Status Change + * interrupt + * @wkp_timer: Timer object for handling Wakeup Detected interrupt + * @lx_state: Lx state of connected device + * + * These are for host mode: + * + * @flags: Flags for handling root port state changes + * @non_periodic_sched_inactive: Inactive QHs in the non-periodic schedule. + * Transfers associated with these QHs are not currently + * assigned to a host channel. + * @non_periodic_sched_active: Active QHs in the non-periodic schedule. + * Transfers associated with these QHs are currently + * assigned to a host channel. + * @non_periodic_qh_ptr: Pointer to next QH to process in the active + * non-periodic schedule + * @periodic_sched_inactive: Inactive QHs in the periodic schedule. This is a + * list of QHs for periodic transfers that are _not_ + * scheduled for the next frame. Each QH in the list has an + * interval counter that determines when it needs to be + * scheduled for execution. This scheduling mechanism + * allows only a simple calculation for periodic bandwidth + * used (i.e. must assume that all periodic transfers may + * need to execute in the same frame). However, it greatly + * simplifies scheduling and should be sufficient for the + * vast majority of OTG hosts, which need to connect to a + * small number of peripherals at one time. Items move from + * this list to periodic_sched_ready when the QH interval + * counter is 0 at SOF. + * @periodic_sched_ready: List of periodic QHs that are ready for execution in + * the next frame, but have not yet been assigned to host + * channels. Items move from this list to + * periodic_sched_assigned as host channels become + * available during the current frame. + * @periodic_sched_assigned: List of periodic QHs to be executed in the next + * frame that are assigned to host channels. Items move + * from this list to periodic_sched_queued as the + * transactions for the QH are queued to the DWC_otg + * controller. + * @periodic_sched_queued: List of periodic QHs that have been queued for + * execution. Items move from this list to either + * periodic_sched_inactive or periodic_sched_ready when the + * channel associated with the transfer is released. If the + * interval for the QH is 1, the item moves to + * periodic_sched_ready because it must be rescheduled for + * the next frame. Otherwise, the item moves to + * periodic_sched_inactive. + * @periodic_usecs: Total bandwidth claimed so far for periodic transfers. + * This value is in microseconds per (micro)frame. The + * assumption is that all periodic transfers may occur in + * the same (micro)frame. + * @frame_usecs: Internal variable used by the microframe scheduler + * @frame_number: Frame number read from the core at SOF. The value ranges + * from 0 to HFNUM_MAX_FRNUM. + * @periodic_qh_count: Count of periodic QHs, if using several eps. Used for + * SOF enable/disable. + * @free_hc_list: Free host channels in the controller. This is a list of + * struct dwc2_host_chan items. + * @periodic_channels: Number of host channels assigned to periodic transfers. + * Currently assuming that there is a dedicated host + * channel for each periodic transaction and at least one + * host channel is available for non-periodic transactions. + * @non_periodic_channels: Number of host channels assigned to non-periodic + * transfers + * @available_host_channels Number of host channels available for the microframe + * scheduler to use + * @hc_ptr_array: Array of pointers to the host channel descriptors. + * Allows accessing a host channel descriptor given the + * host channel number. This is useful in interrupt + * handlers. + * @status_buf: Buffer used for data received during the status phase of + * a control transfer. + * @status_buf_dma: DMA address for status_buf + * @start_work: Delayed work for handling host A-cable connection + * @reset_work: Delayed work for handling a port reset + * @otg_port: OTG port number + * @frame_list: Frame list + * @frame_list_dma: Frame list DMA address + * + * These are for peripheral mode: + * + * @driver: USB gadget driver + * @phy: The otg phy transceiver structure for phy control. + * @uphy: The otg phy transceiver structure for old USB phy control. + * @plat: The platform specific configuration data. This can be removed once + * all SoCs support usb transceiver. + * @supplies: Definition of USB power supplies + * @phyif: PHY interface width + * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos. + * @num_of_eps: Number of available EPs (excluding EP0) + * @debug_root: Root directrory for debugfs. + * @debug_file: Main status file for debugfs. + * @debug_testmode: Testmode status file for debugfs. + * @debug_fifo: FIFO status file for debugfs. + * @ep0_reply: Request used for ep0 reply. + * @ep0_buff: Buffer for EP0 reply data, if needed. + * @ctrl_buff: Buffer for EP0 control requests. + * @ctrl_req: Request for EP0 control packets. + * @ep0_state: EP0 control transfers state + * @test_mode: USB test mode requested by the host + * @last_rst: Time of last reset + * @eps: The endpoints being supplied to the gadget framework + * @g_using_dma: Indicate if dma usage is enabled + * @g_rx_fifo_sz: Contains rx fifo size value + * @g_np_g_tx_fifo_sz: Contains Non-Periodic tx fifo size value + * @g_tx_fifo_sz: Contains tx fifo size value per endpoints + */ +struct dwc2_hsotg { + struct device *dev; + void __iomem *regs; + /** Params detected from hardware */ + struct dwc2_hw_params hw_params; + /** Params to actually use */ + struct dwc2_core_params *core_params; + enum usb_otg_state op_state; + enum usb_dr_mode dr_mode; + unsigned int hcd_enabled:1; + unsigned int gadget_enabled:1; + + struct phy *phy; + struct usb_phy *uphy; + struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)]; + + spinlock_t lock; + struct mutex init_mutex; + void *priv; + int irq; + struct clk *clk; + + unsigned int queuing_high_bandwidth:1; + unsigned int srp_success:1; + + struct workqueue_struct *wq_otg; + struct work_struct wf_otg; + struct timer_list wkp_timer; + enum dwc2_lx_state lx_state; + + struct dentry *debug_root; + struct dentry *debug_file; + struct dentry *debug_testmode; + struct dentry *debug_fifo; + + /* DWC OTG HW Release versions */ +#define DWC2_CORE_REV_2_71a 0x4f54271a +#define DWC2_CORE_REV_2_90a 0x4f54290a +#define DWC2_CORE_REV_2_92a 0x4f54292a +#define DWC2_CORE_REV_2_94a 0x4f54294a +#define DWC2_CORE_REV_3_00a 0x4f54300a + +#if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) + union dwc2_hcd_internal_flags { + u32 d32; + struct { + unsigned port_connect_status_change:1; + unsigned port_connect_status:1; + unsigned port_reset_change:1; + unsigned port_enable_change:1; + unsigned port_suspend_change:1; + unsigned port_over_current_change:1; + unsigned port_l1_change:1; + unsigned reserved:25; + } b; + } flags; + + struct list_head non_periodic_sched_inactive; + struct list_head non_periodic_sched_active; + struct list_head *non_periodic_qh_ptr; + struct list_head periodic_sched_inactive; + struct list_head periodic_sched_ready; + struct list_head periodic_sched_assigned; + struct list_head periodic_sched_queued; + u16 periodic_usecs; + u16 frame_usecs[8]; + u16 frame_number; + u16 periodic_qh_count; + +#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS +#define FRAME_NUM_ARRAY_SIZE 1000 + u16 last_frame_num; + u16 *frame_num_array; + u16 *last_frame_num_array; + int frame_num_idx; + int dumped_frame_num_array; +#endif + + struct list_head free_hc_list; + int periodic_channels; + int non_periodic_channels; + int available_host_channels; + struct dwc2_host_chan *hc_ptr_array[MAX_EPS_CHANNELS]; + u8 *status_buf; + dma_addr_t status_buf_dma; +#define DWC2_HCD_STATUS_BUF_SIZE 64 + + struct delayed_work start_work; + struct delayed_work reset_work; + u8 otg_port; + u32 *frame_list; + dma_addr_t frame_list_dma; + +#ifdef DEBUG + u32 frrem_samples; + u64 frrem_accum; + + u32 hfnum_7_samples_a; + u64 hfnum_7_frrem_accum_a; + u32 hfnum_0_samples_a; + u64 hfnum_0_frrem_accum_a; + u32 hfnum_other_samples_a; + u64 hfnum_other_frrem_accum_a; + + u32 hfnum_7_samples_b; + u64 hfnum_7_frrem_accum_b; + u32 hfnum_0_samples_b; + u64 hfnum_0_frrem_accum_b; + u32 hfnum_other_samples_b; + u64 hfnum_other_frrem_accum_b; +#endif +#endif /* CONFIG_USB_DWC2_HOST || CONFIG_USB_DWC2_DUAL_ROLE */ + +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) + /* Gadget structures */ + struct usb_gadget_driver *driver; + struct s3c_hsotg_plat *plat; + + u32 phyif; + int fifo_mem; + unsigned int dedicated_fifos:1; + unsigned char num_of_eps; + u32 fifo_map; + + struct usb_request *ep0_reply; + struct usb_request *ctrl_req; + void *ep0_buff; + void *ctrl_buff; + enum dwc2_ep0_state ep0_state; + u8 test_mode; + + struct usb_gadget gadget; + unsigned int enabled:1; + unsigned int connected:1; + unsigned long last_rst; + struct s3c_hsotg_ep *eps_in[MAX_EPS_CHANNELS]; + struct s3c_hsotg_ep *eps_out[MAX_EPS_CHANNELS]; + u32 g_using_dma; + u32 g_rx_fifo_sz; + u32 g_np_g_tx_fifo_sz; + u32 g_tx_fifo_sz[MAX_EPS_CHANNELS]; +#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */ +}; + +/* Reasons for halting a host channel */ +enum dwc2_halt_status { + DWC2_HC_XFER_NO_HALT_STATUS, + DWC2_HC_XFER_COMPLETE, + DWC2_HC_XFER_URB_COMPLETE, + DWC2_HC_XFER_ACK, + DWC2_HC_XFER_NAK, + DWC2_HC_XFER_NYET, + DWC2_HC_XFER_STALL, + DWC2_HC_XFER_XACT_ERR, + DWC2_HC_XFER_FRAME_OVERRUN, + DWC2_HC_XFER_BABBLE_ERR, + DWC2_HC_XFER_DATA_TOGGLE_ERR, + DWC2_HC_XFER_AHB_ERR, + DWC2_HC_XFER_PERIODIC_INCOMPLETE, + DWC2_HC_XFER_URB_DEQUEUE, +}; + +/* + * The following functions support initialization of the core driver component + * and the DWC_otg controller + */ +extern void dwc2_core_host_init(struct dwc2_hsotg *hsotg); + +/* + * Host core Functions. + * The following functions support managing the DWC_otg controller in host + * mode. + */ +extern void dwc2_hc_init(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan); +extern void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan, + enum dwc2_halt_status halt_status); +extern void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan); +extern void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan); +extern void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan); +extern int dwc2_hc_continue_transfer(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan); +extern void dwc2_hc_do_ping(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan); +extern void dwc2_enable_host_interrupts(struct dwc2_hsotg *hsotg); +extern void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg); + +extern u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg); +extern bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg); + +/* + * Common core Functions. + * The following functions support managing the DWC_otg controller in either + * device or host mode. + */ +extern void dwc2_read_packet(struct dwc2_hsotg *hsotg, u8 *dest, u16 bytes); +extern void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num); +extern void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg); + +extern int dwc2_core_init(struct dwc2_hsotg *hsotg, bool select_phy, int irq); +extern void dwc2_enable_global_interrupts(struct dwc2_hsotg *hcd); +extern void dwc2_disable_global_interrupts(struct dwc2_hsotg *hcd); + +/* This function should be called on every hardware interrupt. */ +extern irqreturn_t dwc2_handle_common_intr(int irq, void *dev); + +/* OTG Core Parameters */ + +/* + * Specifies the OTG capabilities. The driver will automatically + * detect the value for this parameter if none is specified. + * 0 - HNP and SRP capable (default) + * 1 - SRP Only capable + * 2 - No HNP/SRP capable + */ +extern void dwc2_set_param_otg_cap(struct dwc2_hsotg *hsotg, int val); +#define DWC2_CAP_PARAM_HNP_SRP_CAPABLE 0 +#define DWC2_CAP_PARAM_SRP_ONLY_CAPABLE 1 +#define DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE 2 + +/* + * Specifies whether to use slave or DMA mode for accessing the data + * FIFOs. The driver will automatically detect the value for this + * parameter if none is specified. + * 0 - Slave + * 1 - DMA (default, if available) + */ +extern void dwc2_set_param_dma_enable(struct dwc2_hsotg *hsotg, int val); + +/* + * When DMA mode is enabled specifies whether to use + * address DMA or DMA Descritor mode for accessing the data + * FIFOs in device mode. The driver will automatically detect + * the value for this parameter if none is specified. + * 0 - address DMA + * 1 - DMA Descriptor(default, if available) + */ +extern void dwc2_set_param_dma_desc_enable(struct dwc2_hsotg *hsotg, int val); + +/* + * Specifies the maximum speed of operation in host and device mode. + * The actual speed depends on the speed of the attached device and + * the value of phy_type. The actual speed depends on the speed of the + * attached device. + * 0 - High Speed (default) + * 1 - Full Speed + */ +extern void dwc2_set_param_speed(struct dwc2_hsotg *hsotg, int val); +#define DWC2_SPEED_PARAM_HIGH 0 +#define DWC2_SPEED_PARAM_FULL 1 + +/* + * Specifies whether low power mode is supported when attached + * to a Full Speed or Low Speed device in host mode. + * + * 0 - Don't support low power mode (default) + * 1 - Support low power mode + */ +extern void dwc2_set_param_host_support_fs_ls_low_power( + struct dwc2_hsotg *hsotg, int val); + +/* + * Specifies the PHY clock rate in low power mode when connected to a + * Low Speed device in host mode. This parameter is applicable only if + * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS + * then defaults to 6 MHZ otherwise 48 MHZ. + * + * 0 - 48 MHz + * 1 - 6 MHz + */ +extern void dwc2_set_param_host_ls_low_power_phy_clk(struct dwc2_hsotg *hsotg, + int val); +#define DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0 +#define DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1 + +/* + * 0 - Use cC FIFO size parameters + * 1 - Allow dynamic FIFO sizing (default) + */ +extern void dwc2_set_param_enable_dynamic_fifo(struct dwc2_hsotg *hsotg, + int val); + +/* + * Number of 4-byte words in the Rx FIFO in host mode when dynamic + * FIFO sizing is enabled. + * 16 to 32768 (default 1024) + */ +extern void dwc2_set_param_host_rx_fifo_size(struct dwc2_hsotg *hsotg, int val); + +/* + * Number of 4-byte words in the non-periodic Tx FIFO in host mode + * when Dynamic FIFO sizing is enabled in the core. + * 16 to 32768 (default 256) + */ +extern void dwc2_set_param_host_nperio_tx_fifo_size(struct dwc2_hsotg *hsotg, + int val); + +/* + * Number of 4-byte words in the host periodic Tx FIFO when dynamic + * FIFO sizing is enabled. + * 16 to 32768 (default 256) + */ +extern void dwc2_set_param_host_perio_tx_fifo_size(struct dwc2_hsotg *hsotg, + int val); + +/* + * The maximum transfer size supported in bytes. + * 2047 to 65,535 (default 65,535) + */ +extern void dwc2_set_param_max_transfer_size(struct dwc2_hsotg *hsotg, int val); + +/* + * The maximum number of packets in a transfer. + * 15 to 511 (default 511) + */ +extern void dwc2_set_param_max_packet_count(struct dwc2_hsotg *hsotg, int val); + +/* + * The number of host channel registers to use. + * 1 to 16 (default 11) + * Note: The FPGA configuration supports a maximum of 11 host channels. + */ +extern void dwc2_set_param_host_channels(struct dwc2_hsotg *hsotg, int val); + +/* + * Specifies the type of PHY interface to use. By default, the driver + * will automatically detect the phy_type. + * + * 0 - Full Speed PHY + * 1 - UTMI+ (default) + * 2 - ULPI + */ +extern void dwc2_set_param_phy_type(struct dwc2_hsotg *hsotg, int val); +#define DWC2_PHY_TYPE_PARAM_FS 0 +#define DWC2_PHY_TYPE_PARAM_UTMI 1 +#define DWC2_PHY_TYPE_PARAM_ULPI 2 + +/* + * Specifies the UTMI+ Data Width. This parameter is + * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI + * PHY_TYPE, this parameter indicates the data width between + * the MAC and the ULPI Wrapper.) Also, this parameter is + * applicable only if the OTG_HSPHY_WIDTH cC parameter was set + * to "8 and 16 bits", meaning that the core has been + * configured to work at either data path width. + * + * 8 or 16 bits (default 16) + */ +extern void dwc2_set_param_phy_utmi_width(struct dwc2_hsotg *hsotg, int val); + +/* + * Specifies whether the ULPI operates at double or single + * data rate. This parameter is only applicable if PHY_TYPE is + * ULPI. + * + * 0 - single data rate ULPI interface with 8 bit wide data + * bus (default) + * 1 - double data rate ULPI interface with 4 bit wide data + * bus + */ +extern void dwc2_set_param_phy_ulpi_ddr(struct dwc2_hsotg *hsotg, int val); + +/* + * Specifies whether to use the internal or external supply to + * drive the vbus with a ULPI phy. + */ +extern void dwc2_set_param_phy_ulpi_ext_vbus(struct dwc2_hsotg *hsotg, int val); +#define DWC2_PHY_ULPI_INTERNAL_VBUS 0 +#define DWC2_PHY_ULPI_EXTERNAL_VBUS 1 + +/* + * Specifies whether to use the I2Cinterface for full speed PHY. This + * parameter is only applicable if PHY_TYPE is FS. + * 0 - No (default) + * 1 - Yes + */ +extern void dwc2_set_param_i2c_enable(struct dwc2_hsotg *hsotg, int val); + +extern void dwc2_set_param_ulpi_fs_ls(struct dwc2_hsotg *hsotg, int val); + +extern void dwc2_set_param_ts_dline(struct dwc2_hsotg *hsotg, int val); + +/* + * Specifies whether dedicated transmit FIFOs are + * enabled for non periodic IN endpoints in device mode + * 0 - No + * 1 - Yes + */ +extern void dwc2_set_param_en_multiple_tx_fifo(struct dwc2_hsotg *hsotg, + int val); + +extern void dwc2_set_param_reload_ctl(struct dwc2_hsotg *hsotg, int val); + +extern void dwc2_set_param_ahbcfg(struct dwc2_hsotg *hsotg, int val); + +extern void dwc2_set_param_otg_ver(struct dwc2_hsotg *hsotg, int val); + +/* + * Dump core registers and SPRAM + */ +extern void dwc2_dump_dev_registers(struct dwc2_hsotg *hsotg); +extern void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg); +extern void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg); + +/* + * Return OTG version - either 1.3 or 2.0 + */ +extern u16 dwc2_get_otg_version(struct dwc2_hsotg *hsotg); + +/* Gadget defines */ +#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) +extern int s3c_hsotg_remove(struct dwc2_hsotg *hsotg); +extern int s3c_hsotg_suspend(struct dwc2_hsotg *dwc2); +extern int s3c_hsotg_resume(struct dwc2_hsotg *dwc2); +extern int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq); +extern void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2, + bool reset); +extern void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg); +extern void s3c_hsotg_disconnect(struct dwc2_hsotg *dwc2); +#else +static inline int s3c_hsotg_remove(struct dwc2_hsotg *dwc2) +{ return 0; } +static inline int s3c_hsotg_suspend(struct dwc2_hsotg *dwc2) +{ return 0; } +static inline int s3c_hsotg_resume(struct dwc2_hsotg *dwc2) +{ return 0; } +static inline int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq) +{ return 0; } +static inline void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2, + bool reset) {} +static inline void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg) {} +static inline void s3c_hsotg_disconnect(struct dwc2_hsotg *dwc2) {} +#endif + +#if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) +extern int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg); +extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg); +extern void dwc2_hcd_start(struct dwc2_hsotg *hsotg); +#else +static inline void dwc2_set_all_params(struct dwc2_core_params *params, int value) {} +static inline int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg) +{ return 0; } +static inline void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg) {} +static inline void dwc2_hcd_start(struct dwc2_hsotg *hsotg) {} +static inline void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) {} +static inline int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq, + const struct dwc2_core_params *params) +{ return 0; } +#endif + +#endif /* __DWC2_CORE_H__ */ diff --git a/kernel/drivers/usb/dwc2/core_intr.c b/kernel/drivers/usb/dwc2/core_intr.c new file mode 100644 index 000000000..6cf047878 --- /dev/null +++ b/kernel/drivers/usb/dwc2/core_intr.c @@ -0,0 +1,525 @@ +/* + * core_intr.c - DesignWare HS OTG Controller common interrupt handling + * + * Copyright (C) 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * This file contains the common interrupt handlers + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/usb.h> + +#include <linux/usb/hcd.h> +#include <linux/usb/ch11.h> + +#include "core.h" +#include "hcd.h" + +static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg) +{ + switch (hsotg->op_state) { + case OTG_STATE_A_HOST: + return "a_host"; + case OTG_STATE_A_SUSPEND: + return "a_suspend"; + case OTG_STATE_A_PERIPHERAL: + return "a_peripheral"; + case OTG_STATE_B_PERIPHERAL: + return "b_peripheral"; + case OTG_STATE_B_HOST: + return "b_host"; + default: + return "unknown"; + } +} + +/** + * dwc2_handle_usb_port_intr - handles OTG PRTINT interrupts. + * When the PRTINT interrupt fires, there are certain status bits in the Host + * Port that needs to get cleared. + * + * @hsotg: Programming view of DWC_otg controller + */ +static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg) +{ + u32 hprt0 = readl(hsotg->regs + HPRT0); + + if (hprt0 & HPRT0_ENACHG) { + hprt0 &= ~HPRT0_ENA; + writel(hprt0, hsotg->regs + HPRT0); + } + + /* Clear interrupt */ + writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS); +} + +/** + * dwc2_handle_mode_mismatch_intr() - Logs a mode mismatch warning message + * + * @hsotg: Programming view of DWC_otg controller + */ +static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg) +{ + dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n", + dwc2_is_host_mode(hsotg) ? "Host" : "Device"); + + /* Clear interrupt */ + writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS); +} + +/** + * dwc2_handle_otg_intr() - Handles the OTG Interrupts. It reads the OTG + * Interrupt Register (GOTGINT) to determine what interrupt has occurred. + * + * @hsotg: Programming view of DWC_otg controller + */ +static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg) +{ + u32 gotgint; + u32 gotgctl; + u32 gintmsk; + + gotgint = readl(hsotg->regs + GOTGINT); + gotgctl = readl(hsotg->regs + GOTGCTL); + dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint, + dwc2_op_state_str(hsotg)); + + if (gotgint & GOTGINT_SES_END_DET) { + dev_dbg(hsotg->dev, + " ++OTG Interrupt: Session End Detected++ (%s)\n", + dwc2_op_state_str(hsotg)); + gotgctl = readl(hsotg->regs + GOTGCTL); + + if (dwc2_is_device_mode(hsotg)) + s3c_hsotg_disconnect(hsotg); + + if (hsotg->op_state == OTG_STATE_B_HOST) { + hsotg->op_state = OTG_STATE_B_PERIPHERAL; + } else { + /* + * If not B_HOST and Device HNP still set, HNP did + * not succeed! + */ + if (gotgctl & GOTGCTL_DEVHNPEN) { + dev_dbg(hsotg->dev, "Session End Detected\n"); + dev_err(hsotg->dev, + "Device Not Connected/Responding!\n"); + } + + /* + * If Session End Detected the B-Cable has been + * disconnected + */ + /* Reset to a clean state */ + hsotg->lx_state = DWC2_L0; + } + + gotgctl = readl(hsotg->regs + GOTGCTL); + gotgctl &= ~GOTGCTL_DEVHNPEN; + writel(gotgctl, hsotg->regs + GOTGCTL); + } + + if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) { + dev_dbg(hsotg->dev, + " ++OTG Interrupt: Session Request Success Status Change++\n"); + gotgctl = readl(hsotg->regs + GOTGCTL); + if (gotgctl & GOTGCTL_SESREQSCS) { + if (hsotg->core_params->phy_type == + DWC2_PHY_TYPE_PARAM_FS + && hsotg->core_params->i2c_enable > 0) { + hsotg->srp_success = 1; + } else { + /* Clear Session Request */ + gotgctl = readl(hsotg->regs + GOTGCTL); + gotgctl &= ~GOTGCTL_SESREQ; + writel(gotgctl, hsotg->regs + GOTGCTL); + } + } + } + + if (gotgint & GOTGINT_HST_NEG_SUC_STS_CHNG) { + /* + * Print statements during the HNP interrupt handling + * can cause it to fail + */ + gotgctl = readl(hsotg->regs + GOTGCTL); + /* + * WA for 3.00a- HW is not setting cur_mode, even sometimes + * this does not help + */ + if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) + udelay(100); + if (gotgctl & GOTGCTL_HSTNEGSCS) { + if (dwc2_is_host_mode(hsotg)) { + hsotg->op_state = OTG_STATE_B_HOST; + /* + * Need to disable SOF interrupt immediately. + * When switching from device to host, the PCD + * interrupt handler won't handle the interrupt + * if host mode is already set. The HCD + * interrupt handler won't get called if the + * HCD state is HALT. This means that the + * interrupt does not get handled and Linux + * complains loudly. + */ + gintmsk = readl(hsotg->regs + GINTMSK); + gintmsk &= ~GINTSTS_SOF; + writel(gintmsk, hsotg->regs + GINTMSK); + + /* + * Call callback function with spin lock + * released + */ + spin_unlock(&hsotg->lock); + + /* Initialize the Core for Host mode */ + dwc2_hcd_start(hsotg); + spin_lock(&hsotg->lock); + hsotg->op_state = OTG_STATE_B_HOST; + } + } else { + gotgctl = readl(hsotg->regs + GOTGCTL); + gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN); + writel(gotgctl, hsotg->regs + GOTGCTL); + dev_dbg(hsotg->dev, "HNP Failed\n"); + dev_err(hsotg->dev, + "Device Not Connected/Responding\n"); + } + } + + if (gotgint & GOTGINT_HST_NEG_DET) { + /* + * The disconnect interrupt is set at the same time as + * Host Negotiation Detected. During the mode switch all + * interrupts are cleared so the disconnect interrupt + * handler will not get executed. + */ + dev_dbg(hsotg->dev, + " ++OTG Interrupt: Host Negotiation Detected++ (%s)\n", + (dwc2_is_host_mode(hsotg) ? "Host" : "Device")); + if (dwc2_is_device_mode(hsotg)) { + dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n", + hsotg->op_state); + spin_unlock(&hsotg->lock); + dwc2_hcd_disconnect(hsotg); + spin_lock(&hsotg->lock); + hsotg->op_state = OTG_STATE_A_PERIPHERAL; + } else { + /* Need to disable SOF interrupt immediately */ + gintmsk = readl(hsotg->regs + GINTMSK); + gintmsk &= ~GINTSTS_SOF; + writel(gintmsk, hsotg->regs + GINTMSK); + spin_unlock(&hsotg->lock); + dwc2_hcd_start(hsotg); + spin_lock(&hsotg->lock); + hsotg->op_state = OTG_STATE_A_HOST; + } + } + + if (gotgint & GOTGINT_A_DEV_TOUT_CHG) + dev_dbg(hsotg->dev, + " ++OTG Interrupt: A-Device Timeout Change++\n"); + if (gotgint & GOTGINT_DBNCE_DONE) + dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n"); + + /* Clear GOTGINT */ + writel(gotgint, hsotg->regs + GOTGINT); +} + +/** + * dwc2_handle_conn_id_status_change_intr() - Handles the Connector ID Status + * Change Interrupt + * + * @hsotg: Programming view of DWC_otg controller + * + * Reads the OTG Interrupt Register (GOTCTL) to determine whether this is a + * Device to Host Mode transition or a Host to Device Mode transition. This only + * occurs when the cable is connected/removed from the PHY connector. + */ +static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg) +{ + u32 gintmsk = readl(hsotg->regs + GINTMSK); + + /* Need to disable SOF interrupt immediately */ + gintmsk &= ~GINTSTS_SOF; + writel(gintmsk, hsotg->regs + GINTMSK); + + dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++ (%s)\n", + dwc2_is_host_mode(hsotg) ? "Host" : "Device"); + + /* + * Need to schedule a work, as there are possible DELAY function calls. + * Release lock before scheduling workq as it holds spinlock during + * scheduling. + */ + if (hsotg->wq_otg) { + spin_unlock(&hsotg->lock); + queue_work(hsotg->wq_otg, &hsotg->wf_otg); + spin_lock(&hsotg->lock); + } + + /* Clear interrupt */ + writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS); +} + +/** + * dwc2_handle_session_req_intr() - This interrupt indicates that a device is + * initiating the Session Request Protocol to request the host to turn on bus + * power so a new session can begin + * + * @hsotg: Programming view of DWC_otg controller + * + * This handler responds by turning on bus power. If the DWC_otg controller is + * in low power mode, this handler brings the controller out of low power mode + * before turning on bus power. + */ +static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg) +{ + dev_dbg(hsotg->dev, "++Session Request Interrupt++\n"); + + /* Clear interrupt */ + writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS); + + /* + * Report disconnect if there is any previous session established + */ + if (dwc2_is_device_mode(hsotg)) + s3c_hsotg_disconnect(hsotg); +} + +/* + * This interrupt indicates that the DWC_otg controller has detected a + * resume or remote wakeup sequence. If the DWC_otg controller is in + * low power mode, the handler must brings the controller out of low + * power mode. The controller automatically begins resume signaling. + * The handler schedules a time to stop resume signaling. + */ +static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) +{ + dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n"); + dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state); + + if (dwc2_is_device_mode(hsotg)) { + dev_dbg(hsotg->dev, "DSTS=0x%0x\n", readl(hsotg->regs + DSTS)); + if (hsotg->lx_state == DWC2_L2) { + u32 dctl = readl(hsotg->regs + DCTL); + + /* Clear Remote Wakeup Signaling */ + dctl &= ~DCTL_RMTWKUPSIG; + writel(dctl, hsotg->regs + DCTL); + } + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; + } else { + if (hsotg->lx_state != DWC2_L1) { + u32 pcgcctl = readl(hsotg->regs + PCGCTL); + + /* Restart the Phy Clock */ + pcgcctl &= ~PCGCTL_STOPPCLK; + writel(pcgcctl, hsotg->regs + PCGCTL); + mod_timer(&hsotg->wkp_timer, + jiffies + msecs_to_jiffies(71)); + } else { + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; + } + } + + /* Clear interrupt */ + writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS); +} + +/* + * This interrupt indicates that a device has been disconnected from the + * root port + */ +static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg) +{ + dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n", + dwc2_is_host_mode(hsotg) ? "Host" : "Device", + dwc2_op_state_str(hsotg)); + + if (hsotg->op_state == OTG_STATE_A_HOST) + dwc2_hcd_disconnect(hsotg); + + /* Change to L3 (OFF) state */ + hsotg->lx_state = DWC2_L3; + + writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS); +} + +/* + * This interrupt indicates that SUSPEND state has been detected on the USB. + * + * For HNP the USB Suspend interrupt signals the change from "a_peripheral" + * to "a_host". + * + * When power management is enabled the core will be put in low power mode. + */ +static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg) +{ + u32 dsts; + + dev_dbg(hsotg->dev, "USB SUSPEND\n"); + + if (dwc2_is_device_mode(hsotg)) { + /* + * Check the Device status register to determine if the Suspend + * state is active + */ + dsts = readl(hsotg->regs + DSTS); + dev_dbg(hsotg->dev, "DSTS=0x%0x\n", dsts); + dev_dbg(hsotg->dev, + "DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d\n", + !!(dsts & DSTS_SUSPSTS), + hsotg->hw_params.power_optimized); + } else { + if (hsotg->op_state == OTG_STATE_A_PERIPHERAL) { + dev_dbg(hsotg->dev, "a_peripheral->a_host\n"); + + /* Clear the a_peripheral flag, back to a_host */ + spin_unlock(&hsotg->lock); + dwc2_hcd_start(hsotg); + spin_lock(&hsotg->lock); + hsotg->op_state = OTG_STATE_A_HOST; + } + } + + /* Change to L2 (suspend) state */ + hsotg->lx_state = DWC2_L2; + + /* Clear interrupt */ + writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS); +} + +#define GINTMSK_COMMON (GINTSTS_WKUPINT | GINTSTS_SESSREQINT | \ + GINTSTS_CONIDSTSCHNG | GINTSTS_OTGINT | \ + GINTSTS_MODEMIS | GINTSTS_DISCONNINT | \ + GINTSTS_USBSUSP | GINTSTS_PRTINT) + +/* + * This function returns the Core Interrupt register + */ +static u32 dwc2_read_common_intr(struct dwc2_hsotg *hsotg) +{ + u32 gintsts; + u32 gintmsk; + u32 gahbcfg; + u32 gintmsk_common = GINTMSK_COMMON; + + gintsts = readl(hsotg->regs + GINTSTS); + gintmsk = readl(hsotg->regs + GINTMSK); + gahbcfg = readl(hsotg->regs + GAHBCFG); + + /* If any common interrupts set */ + if (gintsts & gintmsk_common) + dev_dbg(hsotg->dev, "gintsts=%08x gintmsk=%08x\n", + gintsts, gintmsk); + + if (gahbcfg & GAHBCFG_GLBL_INTR_EN) + return gintsts & gintmsk & gintmsk_common; + else + return 0; +} + +/* + * Common interrupt handler + * + * The common interrupts are those that occur in both Host and Device mode. + * This handler handles the following interrupts: + * - Mode Mismatch Interrupt + * - OTG Interrupt + * - Connector ID Status Change Interrupt + * - Disconnect Interrupt + * - Session Request Interrupt + * - Resume / Remote Wakeup Detected Interrupt + * - Suspend Interrupt + */ +irqreturn_t dwc2_handle_common_intr(int irq, void *dev) +{ + struct dwc2_hsotg *hsotg = dev; + u32 gintsts; + irqreturn_t retval = IRQ_NONE; + + spin_lock(&hsotg->lock); + + if (!dwc2_is_controller_alive(hsotg)) { + dev_warn(hsotg->dev, "Controller is dead\n"); + goto out; + } + + gintsts = dwc2_read_common_intr(hsotg); + if (gintsts & ~GINTSTS_PRTINT) + retval = IRQ_HANDLED; + + if (gintsts & GINTSTS_MODEMIS) + dwc2_handle_mode_mismatch_intr(hsotg); + if (gintsts & GINTSTS_OTGINT) + dwc2_handle_otg_intr(hsotg); + if (gintsts & GINTSTS_CONIDSTSCHNG) + dwc2_handle_conn_id_status_change_intr(hsotg); + if (gintsts & GINTSTS_DISCONNINT) + dwc2_handle_disconnect_intr(hsotg); + if (gintsts & GINTSTS_SESSREQINT) + dwc2_handle_session_req_intr(hsotg); + if (gintsts & GINTSTS_WKUPINT) + dwc2_handle_wakeup_detected_intr(hsotg); + if (gintsts & GINTSTS_USBSUSP) + dwc2_handle_usb_suspend_intr(hsotg); + + if (gintsts & GINTSTS_PRTINT) { + /* + * The port interrupt occurs while in device mode with HPRT0 + * Port Enable/Disable + */ + if (dwc2_is_device_mode(hsotg)) { + dev_dbg(hsotg->dev, + " --Port interrupt received in Device mode--\n"); + dwc2_handle_usb_port_intr(hsotg); + retval = IRQ_HANDLED; + } + } + +out: + spin_unlock(&hsotg->lock); + return retval; +} +EXPORT_SYMBOL_GPL(dwc2_handle_common_intr); diff --git a/kernel/drivers/usb/dwc2/gadget.c b/kernel/drivers/usb/dwc2/gadget.c new file mode 100644 index 000000000..6a3088708 --- /dev/null +++ b/kernel/drivers/usb/dwc2/gadget.c @@ -0,0 +1,4127 @@ +/** + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C USB2.0 High-speed / OtG driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/debugfs.h> +#include <linux/mutex.h> +#include <linux/seq_file.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/clk.h> +#include <linux/regulator/consumer.h> +#include <linux/of_platform.h> +#include <linux/phy/phy.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/usb/phy.h> +#include <linux/platform_data/s3c-hsotg.h> +#include <linux/uaccess.h> + +#include "core.h" +#include "hw.h" + +/* conversion functions */ +static inline struct s3c_hsotg_req *our_req(struct usb_request *req) +{ + return container_of(req, struct s3c_hsotg_req, req); +} + +static inline struct s3c_hsotg_ep *our_ep(struct usb_ep *ep) +{ + return container_of(ep, struct s3c_hsotg_ep, ep); +} + +static inline struct dwc2_hsotg *to_hsotg(struct usb_gadget *gadget) +{ + return container_of(gadget, struct dwc2_hsotg, gadget); +} + +static inline void __orr32(void __iomem *ptr, u32 val) +{ + writel(readl(ptr) | val, ptr); +} + +static inline void __bic32(void __iomem *ptr, u32 val) +{ + writel(readl(ptr) & ~val, ptr); +} + +static inline struct s3c_hsotg_ep *index_to_ep(struct dwc2_hsotg *hsotg, + u32 ep_index, u32 dir_in) +{ + if (dir_in) + return hsotg->eps_in[ep_index]; + else + return hsotg->eps_out[ep_index]; +} + +/* forward declaration of functions */ +static void s3c_hsotg_dump(struct dwc2_hsotg *hsotg); + +/** + * using_dma - return the DMA status of the driver. + * @hsotg: The driver state. + * + * Return true if we're using DMA. + * + * Currently, we have the DMA support code worked into everywhere + * that needs it, but the AMBA DMA implementation in the hardware can + * only DMA from 32bit aligned addresses. This means that gadgets such + * as the CDC Ethernet cannot work as they often pass packets which are + * not 32bit aligned. + * + * Unfortunately the choice to use DMA or not is global to the controller + * and seems to be only settable when the controller is being put through + * a core reset. This means we either need to fix the gadgets to take + * account of DMA alignment, or add bounce buffers (yuerk). + * + * g_using_dma is set depending on dts flag. + */ +static inline bool using_dma(struct dwc2_hsotg *hsotg) +{ + return hsotg->g_using_dma; +} + +/** + * s3c_hsotg_en_gsint - enable one or more of the general interrupt + * @hsotg: The device state + * @ints: A bitmask of the interrupts to enable + */ +static void s3c_hsotg_en_gsint(struct dwc2_hsotg *hsotg, u32 ints) +{ + u32 gsintmsk = readl(hsotg->regs + GINTMSK); + u32 new_gsintmsk; + + new_gsintmsk = gsintmsk | ints; + + if (new_gsintmsk != gsintmsk) { + dev_dbg(hsotg->dev, "gsintmsk now 0x%08x\n", new_gsintmsk); + writel(new_gsintmsk, hsotg->regs + GINTMSK); + } +} + +/** + * s3c_hsotg_disable_gsint - disable one or more of the general interrupt + * @hsotg: The device state + * @ints: A bitmask of the interrupts to enable + */ +static void s3c_hsotg_disable_gsint(struct dwc2_hsotg *hsotg, u32 ints) +{ + u32 gsintmsk = readl(hsotg->regs + GINTMSK); + u32 new_gsintmsk; + + new_gsintmsk = gsintmsk & ~ints; + + if (new_gsintmsk != gsintmsk) + writel(new_gsintmsk, hsotg->regs + GINTMSK); +} + +/** + * s3c_hsotg_ctrl_epint - enable/disable an endpoint irq + * @hsotg: The device state + * @ep: The endpoint index + * @dir_in: True if direction is in. + * @en: The enable value, true to enable + * + * Set or clear the mask for an individual endpoint's interrupt + * request. + */ +static void s3c_hsotg_ctrl_epint(struct dwc2_hsotg *hsotg, + unsigned int ep, unsigned int dir_in, + unsigned int en) +{ + unsigned long flags; + u32 bit = 1 << ep; + u32 daint; + + if (!dir_in) + bit <<= 16; + + local_irq_save(flags); + daint = readl(hsotg->regs + DAINTMSK); + if (en) + daint |= bit; + else + daint &= ~bit; + writel(daint, hsotg->regs + DAINTMSK); + local_irq_restore(flags); +} + +/** + * s3c_hsotg_init_fifo - initialise non-periodic FIFOs + * @hsotg: The device instance. + */ +static void s3c_hsotg_init_fifo(struct dwc2_hsotg *hsotg) +{ + unsigned int ep; + unsigned int addr; + int timeout; + u32 val; + + /* Reset fifo map if not correctly cleared during previous session */ + WARN_ON(hsotg->fifo_map); + hsotg->fifo_map = 0; + + /* set RX/NPTX FIFO sizes */ + writel(hsotg->g_rx_fifo_sz, hsotg->regs + GRXFSIZ); + writel((hsotg->g_rx_fifo_sz << FIFOSIZE_STARTADDR_SHIFT) | + (hsotg->g_np_g_tx_fifo_sz << FIFOSIZE_DEPTH_SHIFT), + hsotg->regs + GNPTXFSIZ); + + /* + * arange all the rest of the TX FIFOs, as some versions of this + * block have overlapping default addresses. This also ensures + * that if the settings have been changed, then they are set to + * known values. + */ + + /* start at the end of the GNPTXFSIZ, rounded up */ + addr = hsotg->g_rx_fifo_sz + hsotg->g_np_g_tx_fifo_sz; + + /* + * Configure fifos sizes from provided configuration and assign + * them to endpoints dynamically according to maxpacket size value of + * given endpoint. + */ + for (ep = 1; ep < MAX_EPS_CHANNELS; ep++) { + if (!hsotg->g_tx_fifo_sz[ep]) + continue; + val = addr; + val |= hsotg->g_tx_fifo_sz[ep] << FIFOSIZE_DEPTH_SHIFT; + WARN_ONCE(addr + hsotg->g_tx_fifo_sz[ep] > hsotg->fifo_mem, + "insufficient fifo memory"); + addr += hsotg->g_tx_fifo_sz[ep]; + + writel(val, hsotg->regs + DPTXFSIZN(ep)); + } + + /* + * according to p428 of the design guide, we need to ensure that + * all fifos are flushed before continuing + */ + + writel(GRSTCTL_TXFNUM(0x10) | GRSTCTL_TXFFLSH | + GRSTCTL_RXFFLSH, hsotg->regs + GRSTCTL); + + /* wait until the fifos are both flushed */ + timeout = 100; + while (1) { + val = readl(hsotg->regs + GRSTCTL); + + if ((val & (GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH)) == 0) + break; + + if (--timeout == 0) { + dev_err(hsotg->dev, + "%s: timeout flushing fifos (GRSTCTL=%08x)\n", + __func__, val); + break; + } + + udelay(1); + } + + dev_dbg(hsotg->dev, "FIFOs reset, timeout at %d\n", timeout); +} + +/** + * @ep: USB endpoint to allocate request for. + * @flags: Allocation flags + * + * Allocate a new USB request structure appropriate for the specified endpoint + */ +static struct usb_request *s3c_hsotg_ep_alloc_request(struct usb_ep *ep, + gfp_t flags) +{ + struct s3c_hsotg_req *req; + + req = kzalloc(sizeof(struct s3c_hsotg_req), flags); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +/** + * is_ep_periodic - return true if the endpoint is in periodic mode. + * @hs_ep: The endpoint to query. + * + * Returns true if the endpoint is in periodic mode, meaning it is being + * used for an Interrupt or ISO transfer. + */ +static inline int is_ep_periodic(struct s3c_hsotg_ep *hs_ep) +{ + return hs_ep->periodic; +} + +/** + * s3c_hsotg_unmap_dma - unmap the DMA memory being used for the request + * @hsotg: The device state. + * @hs_ep: The endpoint for the request + * @hs_req: The request being processed. + * + * This is the reverse of s3c_hsotg_map_dma(), called for the completion + * of a request to ensure the buffer is ready for access by the caller. + */ +static void s3c_hsotg_unmap_dma(struct dwc2_hsotg *hsotg, + struct s3c_hsotg_ep *hs_ep, + struct s3c_hsotg_req *hs_req) +{ + struct usb_request *req = &hs_req->req; + + /* ignore this if we're not moving any data */ + if (hs_req->req.length == 0) + return; + + usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->dir_in); +} + +/** + * s3c_hsotg_write_fifo - write packet Data to the TxFIFO + * @hsotg: The controller state. + * @hs_ep: The endpoint we're going to write for. + * @hs_req: The request to write data for. + * + * This is called when the TxFIFO has some space in it to hold a new + * transmission and we have something to give it. The actual setup of + * the data size is done elsewhere, so all we have to do is to actually + * write the data. + * + * The return value is zero if there is more space (or nothing was done) + * otherwise -ENOSPC is returned if the FIFO space was used up. + * + * This routine is only needed for PIO + */ +static int s3c_hsotg_write_fifo(struct dwc2_hsotg *hsotg, + struct s3c_hsotg_ep *hs_ep, + struct s3c_hsotg_req *hs_req) +{ + bool periodic = is_ep_periodic(hs_ep); + u32 gnptxsts = readl(hsotg->regs + GNPTXSTS); + int buf_pos = hs_req->req.actual; + int to_write = hs_ep->size_loaded; + void *data; + int can_write; + int pkt_round; + int max_transfer; + + to_write -= (buf_pos - hs_ep->last_load); + + /* if there's nothing to write, get out early */ + if (to_write == 0) + return 0; + + if (periodic && !hsotg->dedicated_fifos) { + u32 epsize = readl(hsotg->regs + DIEPTSIZ(hs_ep->index)); + int size_left; + int size_done; + + /* + * work out how much data was loaded so we can calculate + * how much data is left in the fifo. + */ + + size_left = DXEPTSIZ_XFERSIZE_GET(epsize); + + /* + * if shared fifo, we cannot write anything until the + * previous data has been completely sent. + */ + if (hs_ep->fifo_load != 0) { + s3c_hsotg_en_gsint(hsotg, GINTSTS_PTXFEMP); + return -ENOSPC; + } + + dev_dbg(hsotg->dev, "%s: left=%d, load=%d, fifo=%d, size %d\n", + __func__, size_left, + hs_ep->size_loaded, hs_ep->fifo_load, hs_ep->fifo_size); + + /* how much of the data has moved */ + size_done = hs_ep->size_loaded - size_left; + + /* how much data is left in the fifo */ + can_write = hs_ep->fifo_load - size_done; + dev_dbg(hsotg->dev, "%s: => can_write1=%d\n", + __func__, can_write); + + can_write = hs_ep->fifo_size - can_write; + dev_dbg(hsotg->dev, "%s: => can_write2=%d\n", + __func__, can_write); + + if (can_write <= 0) { + s3c_hsotg_en_gsint(hsotg, GINTSTS_PTXFEMP); + return -ENOSPC; + } + } else if (hsotg->dedicated_fifos && hs_ep->index != 0) { + can_write = readl(hsotg->regs + DTXFSTS(hs_ep->index)); + + can_write &= 0xffff; + can_write *= 4; + } else { + if (GNPTXSTS_NP_TXQ_SPC_AVAIL_GET(gnptxsts) == 0) { + dev_dbg(hsotg->dev, + "%s: no queue slots available (0x%08x)\n", + __func__, gnptxsts); + + s3c_hsotg_en_gsint(hsotg, GINTSTS_NPTXFEMP); + return -ENOSPC; + } + + can_write = GNPTXSTS_NP_TXF_SPC_AVAIL_GET(gnptxsts); + can_write *= 4; /* fifo size is in 32bit quantities. */ + } + + max_transfer = hs_ep->ep.maxpacket * hs_ep->mc; + + dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, max_transfer %d\n", + __func__, gnptxsts, can_write, to_write, max_transfer); + + /* + * limit to 512 bytes of data, it seems at least on the non-periodic + * FIFO, requests of >512 cause the endpoint to get stuck with a + * fragment of the end of the transfer in it. + */ + if (can_write > 512 && !periodic) + can_write = 512; + + /* + * limit the write to one max-packet size worth of data, but allow + * the transfer to return that it did not run out of fifo space + * doing it. + */ + if (to_write > max_transfer) { + to_write = max_transfer; + + /* it's needed only when we do not use dedicated fifos */ + if (!hsotg->dedicated_fifos) + s3c_hsotg_en_gsint(hsotg, + periodic ? GINTSTS_PTXFEMP : + GINTSTS_NPTXFEMP); + } + + /* see if we can write data */ + + if (to_write > can_write) { + to_write = can_write; + pkt_round = to_write % max_transfer; + + /* + * Round the write down to an + * exact number of packets. + * + * Note, we do not currently check to see if we can ever + * write a full packet or not to the FIFO. + */ + + if (pkt_round) + to_write -= pkt_round; + + /* + * enable correct FIFO interrupt to alert us when there + * is more room left. + */ + + /* it's needed only when we do not use dedicated fifos */ + if (!hsotg->dedicated_fifos) + s3c_hsotg_en_gsint(hsotg, + periodic ? GINTSTS_PTXFEMP : + GINTSTS_NPTXFEMP); + } + + dev_dbg(hsotg->dev, "write %d/%d, can_write %d, done %d\n", + to_write, hs_req->req.length, can_write, buf_pos); + + if (to_write <= 0) + return -ENOSPC; + + hs_req->req.actual = buf_pos + to_write; + hs_ep->total_data += to_write; + + if (periodic) + hs_ep->fifo_load += to_write; + + to_write = DIV_ROUND_UP(to_write, 4); + data = hs_req->req.buf + buf_pos; + + iowrite32_rep(hsotg->regs + EPFIFO(hs_ep->index), data, to_write); + + return (to_write >= can_write) ? -ENOSPC : 0; +} + +/** + * get_ep_limit - get the maximum data legnth for this endpoint + * @hs_ep: The endpoint + * + * Return the maximum data that can be queued in one go on a given endpoint + * so that transfers that are too long can be split. + */ +static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep) +{ + int index = hs_ep->index; + unsigned maxsize; + unsigned maxpkt; + + if (index != 0) { + maxsize = DXEPTSIZ_XFERSIZE_LIMIT + 1; + maxpkt = DXEPTSIZ_PKTCNT_LIMIT + 1; + } else { + maxsize = 64+64; + if (hs_ep->dir_in) + maxpkt = DIEPTSIZ0_PKTCNT_LIMIT + 1; + else + maxpkt = 2; + } + + /* we made the constant loading easier above by using +1 */ + maxpkt--; + maxsize--; + + /* + * constrain by packet count if maxpkts*pktsize is greater + * than the length register size. + */ + + if ((maxpkt * hs_ep->ep.maxpacket) < maxsize) + maxsize = maxpkt * hs_ep->ep.maxpacket; + + return maxsize; +} + +/** + * s3c_hsotg_start_req - start a USB request from an endpoint's queue + * @hsotg: The controller state. + * @hs_ep: The endpoint to process a request for + * @hs_req: The request to start. + * @continuing: True if we are doing more for the current request. + * + * Start the given request running by setting the endpoint registers + * appropriately, and writing any data to the FIFOs. + */ +static void s3c_hsotg_start_req(struct dwc2_hsotg *hsotg, + struct s3c_hsotg_ep *hs_ep, + struct s3c_hsotg_req *hs_req, + bool continuing) +{ + struct usb_request *ureq = &hs_req->req; + int index = hs_ep->index; + int dir_in = hs_ep->dir_in; + u32 epctrl_reg; + u32 epsize_reg; + u32 epsize; + u32 ctrl; + unsigned length; + unsigned packets; + unsigned maxreq; + + if (index != 0) { + if (hs_ep->req && !continuing) { + dev_err(hsotg->dev, "%s: active request\n", __func__); + WARN_ON(1); + return; + } else if (hs_ep->req != hs_req && continuing) { + dev_err(hsotg->dev, + "%s: continue different req\n", __func__); + WARN_ON(1); + return; + } + } + + epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); + epsize_reg = dir_in ? DIEPTSIZ(index) : DOEPTSIZ(index); + + dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x, ep %d, dir %s\n", + __func__, readl(hsotg->regs + epctrl_reg), index, + hs_ep->dir_in ? "in" : "out"); + + /* If endpoint is stalled, we will restart request later */ + ctrl = readl(hsotg->regs + epctrl_reg); + + if (ctrl & DXEPCTL_STALL) { + dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index); + return; + } + + length = ureq->length - ureq->actual; + dev_dbg(hsotg->dev, "ureq->length:%d ureq->actual:%d\n", + ureq->length, ureq->actual); + + maxreq = get_ep_limit(hs_ep); + if (length > maxreq) { + int round = maxreq % hs_ep->ep.maxpacket; + + dev_dbg(hsotg->dev, "%s: length %d, max-req %d, r %d\n", + __func__, length, maxreq, round); + + /* round down to multiple of packets */ + if (round) + maxreq -= round; + + length = maxreq; + } + + if (length) + packets = DIV_ROUND_UP(length, hs_ep->ep.maxpacket); + else + packets = 1; /* send one packet if length is zero. */ + + if (hs_ep->isochronous && length > (hs_ep->mc * hs_ep->ep.maxpacket)) { + dev_err(hsotg->dev, "req length > maxpacket*mc\n"); + return; + } + + if (dir_in && index != 0) + if (hs_ep->isochronous) + epsize = DXEPTSIZ_MC(packets); + else + epsize = DXEPTSIZ_MC(1); + else + epsize = 0; + + /* + * zero length packet should be programmed on its own and should not + * be counted in DIEPTSIZ.PktCnt with other packets. + */ + if (dir_in && ureq->zero && !continuing) { + /* Test if zlp is actually required. */ + if ((ureq->length >= hs_ep->ep.maxpacket) && + !(ureq->length % hs_ep->ep.maxpacket)) + hs_ep->send_zlp = 1; + } + + epsize |= DXEPTSIZ_PKTCNT(packets); + epsize |= DXEPTSIZ_XFERSIZE(length); + + dev_dbg(hsotg->dev, "%s: %d@%d/%d, 0x%08x => 0x%08x\n", + __func__, packets, length, ureq->length, epsize, epsize_reg); + + /* store the request as the current one we're doing */ + hs_ep->req = hs_req; + + /* write size / packets */ + writel(epsize, hsotg->regs + epsize_reg); + + if (using_dma(hsotg) && !continuing) { + unsigned int dma_reg; + + /* + * write DMA address to control register, buffer already + * synced by s3c_hsotg_ep_queue(). + */ + + dma_reg = dir_in ? DIEPDMA(index) : DOEPDMA(index); + writel(ureq->dma, hsotg->regs + dma_reg); + + dev_dbg(hsotg->dev, "%s: %pad => 0x%08x\n", + __func__, &ureq->dma, dma_reg); + } + + ctrl |= DXEPCTL_EPENA; /* ensure ep enabled */ + ctrl |= DXEPCTL_USBACTEP; + + dev_dbg(hsotg->dev, "ep0 state:%d\n", hsotg->ep0_state); + + /* For Setup request do not clear NAK */ + if (!(index == 0 && hsotg->ep0_state == DWC2_EP0_SETUP)) + ctrl |= DXEPCTL_CNAK; /* clear NAK set by core */ + + dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl); + writel(ctrl, hsotg->regs + epctrl_reg); + + /* + * set these, it seems that DMA support increments past the end + * of the packet buffer so we need to calculate the length from + * this information. + */ + hs_ep->size_loaded = length; + hs_ep->last_load = ureq->actual; + + if (dir_in && !using_dma(hsotg)) { + /* set these anyway, we may need them for non-periodic in */ + hs_ep->fifo_load = 0; + + s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req); + } + + /* + * clear the INTknTXFEmpMsk when we start request, more as a aide + * to debugging to see what is going on. + */ + if (dir_in) + writel(DIEPMSK_INTKNTXFEMPMSK, + hsotg->regs + DIEPINT(index)); + + /* + * Note, trying to clear the NAK here causes problems with transmit + * on the S3C6400 ending up with the TXFIFO becoming full. + */ + + /* check ep is enabled */ + if (!(readl(hsotg->regs + epctrl_reg) & DXEPCTL_EPENA)) + dev_dbg(hsotg->dev, + "ep%d: failed to become enabled (DXEPCTL=0x%08x)?\n", + index, readl(hsotg->regs + epctrl_reg)); + + dev_dbg(hsotg->dev, "%s: DXEPCTL=0x%08x\n", + __func__, readl(hsotg->regs + epctrl_reg)); + + /* enable ep interrupts */ + s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 1); +} + +/** + * s3c_hsotg_map_dma - map the DMA memory being used for the request + * @hsotg: The device state. + * @hs_ep: The endpoint the request is on. + * @req: The request being processed. + * + * We've been asked to queue a request, so ensure that the memory buffer + * is correctly setup for DMA. If we've been passed an extant DMA address + * then ensure the buffer has been synced to memory. If our buffer has no + * DMA memory, then we map the memory and mark our request to allow us to + * cleanup on completion. + */ +static int s3c_hsotg_map_dma(struct dwc2_hsotg *hsotg, + struct s3c_hsotg_ep *hs_ep, + struct usb_request *req) +{ + struct s3c_hsotg_req *hs_req = our_req(req); + int ret; + + /* if the length is zero, ignore the DMA data */ + if (hs_req->req.length == 0) + return 0; + + ret = usb_gadget_map_request(&hsotg->gadget, req, hs_ep->dir_in); + if (ret) + goto dma_error; + + return 0; + +dma_error: + dev_err(hsotg->dev, "%s: failed to map buffer %p, %d bytes\n", + __func__, req->buf, req->length); + + return -EIO; +} + +static int s3c_hsotg_handle_unaligned_buf_start(struct dwc2_hsotg *hsotg, + struct s3c_hsotg_ep *hs_ep, struct s3c_hsotg_req *hs_req) +{ + void *req_buf = hs_req->req.buf; + + /* If dma is not being used or buffer is aligned */ + if (!using_dma(hsotg) || !((long)req_buf & 3)) + return 0; + + WARN_ON(hs_req->saved_req_buf); + + dev_dbg(hsotg->dev, "%s: %s: buf=%p length=%d\n", __func__, + hs_ep->ep.name, req_buf, hs_req->req.length); + + hs_req->req.buf = kmalloc(hs_req->req.length, GFP_ATOMIC); + if (!hs_req->req.buf) { + hs_req->req.buf = req_buf; + dev_err(hsotg->dev, + "%s: unable to allocate memory for bounce buffer\n", + __func__); + return -ENOMEM; + } + + /* Save actual buffer */ + hs_req->saved_req_buf = req_buf; + + if (hs_ep->dir_in) + memcpy(hs_req->req.buf, req_buf, hs_req->req.length); + return 0; +} + +static void s3c_hsotg_handle_unaligned_buf_complete(struct dwc2_hsotg *hsotg, + struct s3c_hsotg_ep *hs_ep, struct s3c_hsotg_req *hs_req) +{ + /* If dma is not being used or buffer was aligned */ + if (!using_dma(hsotg) || !hs_req->saved_req_buf) + return; + + dev_dbg(hsotg->dev, "%s: %s: status=%d actual-length=%d\n", __func__, + hs_ep->ep.name, hs_req->req.status, hs_req->req.actual); + + /* Copy data from bounce buffer on successful out transfer */ + if (!hs_ep->dir_in && !hs_req->req.status) + memcpy(hs_req->saved_req_buf, hs_req->req.buf, + hs_req->req.actual); + + /* Free bounce buffer */ + kfree(hs_req->req.buf); + + hs_req->req.buf = hs_req->saved_req_buf; + hs_req->saved_req_buf = NULL; +} + +static int s3c_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req, + gfp_t gfp_flags) +{ + struct s3c_hsotg_req *hs_req = our_req(req); + struct s3c_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hs = hs_ep->parent; + bool first; + int ret; + + dev_dbg(hs->dev, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n", + ep->name, req, req->length, req->buf, req->no_interrupt, + req->zero, req->short_not_ok); + + /* initialise status of the request */ + INIT_LIST_HEAD(&hs_req->queue); + req->actual = 0; + req->status = -EINPROGRESS; + + ret = s3c_hsotg_handle_unaligned_buf_start(hs, hs_ep, hs_req); + if (ret) + return ret; + + /* if we're using DMA, sync the buffers as necessary */ + if (using_dma(hs)) { + ret = s3c_hsotg_map_dma(hs, hs_ep, req); + if (ret) + return ret; + } + + first = list_empty(&hs_ep->queue); + list_add_tail(&hs_req->queue, &hs_ep->queue); + + if (first) + s3c_hsotg_start_req(hs, hs_ep, hs_req, false); + + return 0; +} + +static int s3c_hsotg_ep_queue_lock(struct usb_ep *ep, struct usb_request *req, + gfp_t gfp_flags) +{ + struct s3c_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hs = hs_ep->parent; + unsigned long flags = 0; + int ret = 0; + + spin_lock_irqsave(&hs->lock, flags); + ret = s3c_hsotg_ep_queue(ep, req, gfp_flags); + spin_unlock_irqrestore(&hs->lock, flags); + + return ret; +} + +static void s3c_hsotg_ep_free_request(struct usb_ep *ep, + struct usb_request *req) +{ + struct s3c_hsotg_req *hs_req = our_req(req); + + kfree(hs_req); +} + +/** + * s3c_hsotg_complete_oursetup - setup completion callback + * @ep: The endpoint the request was on. + * @req: The request completed. + * + * Called on completion of any requests the driver itself + * submitted that need cleaning up. + */ +static void s3c_hsotg_complete_oursetup(struct usb_ep *ep, + struct usb_request *req) +{ + struct s3c_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hsotg = hs_ep->parent; + + dev_dbg(hsotg->dev, "%s: ep %p, req %p\n", __func__, ep, req); + + s3c_hsotg_ep_free_request(ep, req); +} + +/** + * ep_from_windex - convert control wIndex value to endpoint + * @hsotg: The driver state. + * @windex: The control request wIndex field (in host order). + * + * Convert the given wIndex into a pointer to an driver endpoint + * structure, or return NULL if it is not a valid endpoint. + */ +static struct s3c_hsotg_ep *ep_from_windex(struct dwc2_hsotg *hsotg, + u32 windex) +{ + struct s3c_hsotg_ep *ep; + int dir = (windex & USB_DIR_IN) ? 1 : 0; + int idx = windex & 0x7F; + + if (windex >= 0x100) + return NULL; + + if (idx > hsotg->num_of_eps) + return NULL; + + ep = index_to_ep(hsotg, idx, dir); + + if (idx && ep->dir_in != dir) + return NULL; + + return ep; +} + +/** + * s3c_hsotg_set_test_mode - Enable usb Test Modes + * @hsotg: The driver state. + * @testmode: requested usb test mode + * Enable usb Test Mode requested by the Host. + */ +static int s3c_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode) +{ + int dctl = readl(hsotg->regs + DCTL); + + dctl &= ~DCTL_TSTCTL_MASK; + switch (testmode) { + case TEST_J: + case TEST_K: + case TEST_SE0_NAK: + case TEST_PACKET: + case TEST_FORCE_EN: + dctl |= testmode << DCTL_TSTCTL_SHIFT; + break; + default: + return -EINVAL; + } + writel(dctl, hsotg->regs + DCTL); + return 0; +} + +/** + * s3c_hsotg_send_reply - send reply to control request + * @hsotg: The device state + * @ep: Endpoint 0 + * @buff: Buffer for request + * @length: Length of reply. + * + * Create a request and queue it on the given endpoint. This is useful as + * an internal method of sending replies to certain control requests, etc. + */ +static int s3c_hsotg_send_reply(struct dwc2_hsotg *hsotg, + struct s3c_hsotg_ep *ep, + void *buff, + int length) +{ + struct usb_request *req; + int ret; + + dev_dbg(hsotg->dev, "%s: buff %p, len %d\n", __func__, buff, length); + + req = s3c_hsotg_ep_alloc_request(&ep->ep, GFP_ATOMIC); + hsotg->ep0_reply = req; + if (!req) { + dev_warn(hsotg->dev, "%s: cannot alloc req\n", __func__); + return -ENOMEM; + } + + req->buf = hsotg->ep0_buff; + req->length = length; + /* + * zero flag is for sending zlp in DATA IN stage. It has no impact on + * STATUS stage. + */ + req->zero = 0; + req->complete = s3c_hsotg_complete_oursetup; + + if (length) + memcpy(req->buf, buff, length); + + ret = s3c_hsotg_ep_queue(&ep->ep, req, GFP_ATOMIC); + if (ret) { + dev_warn(hsotg->dev, "%s: cannot queue req\n", __func__); + return ret; + } + + return 0; +} + +/** + * s3c_hsotg_process_req_status - process request GET_STATUS + * @hsotg: The device state + * @ctrl: USB control request + */ +static int s3c_hsotg_process_req_status(struct dwc2_hsotg *hsotg, + struct usb_ctrlrequest *ctrl) +{ + struct s3c_hsotg_ep *ep0 = hsotg->eps_out[0]; + struct s3c_hsotg_ep *ep; + __le16 reply; + int ret; + + dev_dbg(hsotg->dev, "%s: USB_REQ_GET_STATUS\n", __func__); + + if (!ep0->dir_in) { + dev_warn(hsotg->dev, "%s: direction out?\n", __func__); + return -EINVAL; + } + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + reply = cpu_to_le16(0); /* bit 0 => self powered, + * bit 1 => remote wakeup */ + break; + + case USB_RECIP_INTERFACE: + /* currently, the data result should be zero */ + reply = cpu_to_le16(0); + break; + + case USB_RECIP_ENDPOINT: + ep = ep_from_windex(hsotg, le16_to_cpu(ctrl->wIndex)); + if (!ep) + return -ENOENT; + + reply = cpu_to_le16(ep->halted ? 1 : 0); + break; + + default: + return 0; + } + + if (le16_to_cpu(ctrl->wLength) != 2) + return -EINVAL; + + ret = s3c_hsotg_send_reply(hsotg, ep0, &reply, 2); + if (ret) { + dev_err(hsotg->dev, "%s: failed to send reply\n", __func__); + return ret; + } + + return 1; +} + +static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value); + +/** + * get_ep_head - return the first request on the endpoint + * @hs_ep: The controller endpoint to get + * + * Get the first request on the endpoint. + */ +static struct s3c_hsotg_req *get_ep_head(struct s3c_hsotg_ep *hs_ep) +{ + if (list_empty(&hs_ep->queue)) + return NULL; + + return list_first_entry(&hs_ep->queue, struct s3c_hsotg_req, queue); +} + +/** + * s3c_hsotg_process_req_feature - process request {SET,CLEAR}_FEATURE + * @hsotg: The device state + * @ctrl: USB control request + */ +static int s3c_hsotg_process_req_feature(struct dwc2_hsotg *hsotg, + struct usb_ctrlrequest *ctrl) +{ + struct s3c_hsotg_ep *ep0 = hsotg->eps_out[0]; + struct s3c_hsotg_req *hs_req; + bool restart; + bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE); + struct s3c_hsotg_ep *ep; + int ret; + bool halted; + u32 recip; + u32 wValue; + u32 wIndex; + + dev_dbg(hsotg->dev, "%s: %s_FEATURE\n", + __func__, set ? "SET" : "CLEAR"); + + wValue = le16_to_cpu(ctrl->wValue); + wIndex = le16_to_cpu(ctrl->wIndex); + recip = ctrl->bRequestType & USB_RECIP_MASK; + + switch (recip) { + case USB_RECIP_DEVICE: + switch (wValue) { + case USB_DEVICE_TEST_MODE: + if ((wIndex & 0xff) != 0) + return -EINVAL; + if (!set) + return -EINVAL; + + hsotg->test_mode = wIndex >> 8; + ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0); + if (ret) { + dev_err(hsotg->dev, + "%s: failed to send reply\n", __func__); + return ret; + } + break; + default: + return -ENOENT; + } + break; + + case USB_RECIP_ENDPOINT: + ep = ep_from_windex(hsotg, wIndex); + if (!ep) { + dev_dbg(hsotg->dev, "%s: no endpoint for 0x%04x\n", + __func__, wIndex); + return -ENOENT; + } + + switch (wValue) { + case USB_ENDPOINT_HALT: + halted = ep->halted; + + s3c_hsotg_ep_sethalt(&ep->ep, set); + + ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0); + if (ret) { + dev_err(hsotg->dev, + "%s: failed to send reply\n", __func__); + return ret; + } + + /* + * we have to complete all requests for ep if it was + * halted, and the halt was cleared by CLEAR_FEATURE + */ + + if (!set && halted) { + /* + * If we have request in progress, + * then complete it + */ + if (ep->req) { + hs_req = ep->req; + ep->req = NULL; + list_del_init(&hs_req->queue); + if (hs_req->req.complete) { + spin_unlock(&hsotg->lock); + usb_gadget_giveback_request( + &ep->ep, &hs_req->req); + spin_lock(&hsotg->lock); + } + } + + /* If we have pending request, then start it */ + if (!ep->req) { + restart = !list_empty(&ep->queue); + if (restart) { + hs_req = get_ep_head(ep); + s3c_hsotg_start_req(hsotg, ep, + hs_req, false); + } + } + } + + break; + + default: + return -ENOENT; + } + break; + default: + return -ENOENT; + } + return 1; +} + +static void s3c_hsotg_enqueue_setup(struct dwc2_hsotg *hsotg); + +/** + * s3c_hsotg_stall_ep0 - stall ep0 + * @hsotg: The device state + * + * Set stall for ep0 as response for setup request. + */ +static void s3c_hsotg_stall_ep0(struct dwc2_hsotg *hsotg) +{ + struct s3c_hsotg_ep *ep0 = hsotg->eps_out[0]; + u32 reg; + u32 ctrl; + + dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in); + reg = (ep0->dir_in) ? DIEPCTL0 : DOEPCTL0; + + /* + * DxEPCTL_Stall will be cleared by EP once it has + * taken effect, so no need to clear later. + */ + + ctrl = readl(hsotg->regs + reg); + ctrl |= DXEPCTL_STALL; + ctrl |= DXEPCTL_CNAK; + writel(ctrl, hsotg->regs + reg); + + dev_dbg(hsotg->dev, + "written DXEPCTL=0x%08x to %08x (DXEPCTL=0x%08x)\n", + ctrl, reg, readl(hsotg->regs + reg)); + + /* + * complete won't be called, so we enqueue + * setup request here + */ + s3c_hsotg_enqueue_setup(hsotg); +} + +/** + * s3c_hsotg_process_control - process a control request + * @hsotg: The device state + * @ctrl: The control request received + * + * The controller has received the SETUP phase of a control request, and + * needs to work out what to do next (and whether to pass it on to the + * gadget driver). + */ +static void s3c_hsotg_process_control(struct dwc2_hsotg *hsotg, + struct usb_ctrlrequest *ctrl) +{ + struct s3c_hsotg_ep *ep0 = hsotg->eps_out[0]; + int ret = 0; + u32 dcfg; + + dev_dbg(hsotg->dev, "ctrl Req=%02x, Type=%02x, V=%04x, L=%04x\n", + ctrl->bRequest, ctrl->bRequestType, + ctrl->wValue, ctrl->wLength); + + if (ctrl->wLength == 0) { + ep0->dir_in = 1; + hsotg->ep0_state = DWC2_EP0_STATUS_IN; + } else if (ctrl->bRequestType & USB_DIR_IN) { + ep0->dir_in = 1; + hsotg->ep0_state = DWC2_EP0_DATA_IN; + } else { + ep0->dir_in = 0; + hsotg->ep0_state = DWC2_EP0_DATA_OUT; + } + + if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { + switch (ctrl->bRequest) { + case USB_REQ_SET_ADDRESS: + hsotg->connected = 1; + dcfg = readl(hsotg->regs + DCFG); + dcfg &= ~DCFG_DEVADDR_MASK; + dcfg |= (le16_to_cpu(ctrl->wValue) << + DCFG_DEVADDR_SHIFT) & DCFG_DEVADDR_MASK; + writel(dcfg, hsotg->regs + DCFG); + + dev_info(hsotg->dev, "new address %d\n", ctrl->wValue); + + ret = s3c_hsotg_send_reply(hsotg, ep0, NULL, 0); + return; + + case USB_REQ_GET_STATUS: + ret = s3c_hsotg_process_req_status(hsotg, ctrl); + break; + + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + ret = s3c_hsotg_process_req_feature(hsotg, ctrl); + break; + } + } + + /* as a fallback, try delivering it to the driver to deal with */ + + if (ret == 0 && hsotg->driver) { + spin_unlock(&hsotg->lock); + ret = hsotg->driver->setup(&hsotg->gadget, ctrl); + spin_lock(&hsotg->lock); + if (ret < 0) + dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret); + } + + /* + * the request is either unhandlable, or is not formatted correctly + * so respond with a STALL for the status stage to indicate failure. + */ + + if (ret < 0) + s3c_hsotg_stall_ep0(hsotg); +} + +/** + * s3c_hsotg_complete_setup - completion of a setup transfer + * @ep: The endpoint the request was on. + * @req: The request completed. + * + * Called on completion of any requests the driver itself submitted for + * EP0 setup packets + */ +static void s3c_hsotg_complete_setup(struct usb_ep *ep, + struct usb_request *req) +{ + struct s3c_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hsotg = hs_ep->parent; + + if (req->status < 0) { + dev_dbg(hsotg->dev, "%s: failed %d\n", __func__, req->status); + return; + } + + spin_lock(&hsotg->lock); + if (req->actual == 0) + s3c_hsotg_enqueue_setup(hsotg); + else + s3c_hsotg_process_control(hsotg, req->buf); + spin_unlock(&hsotg->lock); +} + +/** + * s3c_hsotg_enqueue_setup - start a request for EP0 packets + * @hsotg: The device state. + * + * Enqueue a request on EP0 if necessary to received any SETUP packets + * received from the host. + */ +static void s3c_hsotg_enqueue_setup(struct dwc2_hsotg *hsotg) +{ + struct usb_request *req = hsotg->ctrl_req; + struct s3c_hsotg_req *hs_req = our_req(req); + int ret; + + dev_dbg(hsotg->dev, "%s: queueing setup request\n", __func__); + + req->zero = 0; + req->length = 8; + req->buf = hsotg->ctrl_buff; + req->complete = s3c_hsotg_complete_setup; + + if (!list_empty(&hs_req->queue)) { + dev_dbg(hsotg->dev, "%s already queued???\n", __func__); + return; + } + + hsotg->eps_out[0]->dir_in = 0; + hsotg->eps_out[0]->send_zlp = 0; + hsotg->ep0_state = DWC2_EP0_SETUP; + + ret = s3c_hsotg_ep_queue(&hsotg->eps_out[0]->ep, req, GFP_ATOMIC); + if (ret < 0) { + dev_err(hsotg->dev, "%s: failed queue (%d)\n", __func__, ret); + /* + * Don't think there's much we can do other than watch the + * driver fail. + */ + } +} + +static void s3c_hsotg_program_zlp(struct dwc2_hsotg *hsotg, + struct s3c_hsotg_ep *hs_ep) +{ + u32 ctrl; + u8 index = hs_ep->index; + u32 epctl_reg = hs_ep->dir_in ? DIEPCTL(index) : DOEPCTL(index); + u32 epsiz_reg = hs_ep->dir_in ? DIEPTSIZ(index) : DOEPTSIZ(index); + + if (hs_ep->dir_in) + dev_dbg(hsotg->dev, "Sending zero-length packet on ep%d\n", + index); + else + dev_dbg(hsotg->dev, "Receiving zero-length packet on ep%d\n", + index); + + writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) | + DXEPTSIZ_XFERSIZE(0), hsotg->regs + + epsiz_reg); + + ctrl = readl(hsotg->regs + epctl_reg); + ctrl |= DXEPCTL_CNAK; /* clear NAK set by core */ + ctrl |= DXEPCTL_EPENA; /* ensure ep enabled */ + ctrl |= DXEPCTL_USBACTEP; + writel(ctrl, hsotg->regs + epctl_reg); +} + +/** + * s3c_hsotg_complete_request - complete a request given to us + * @hsotg: The device state. + * @hs_ep: The endpoint the request was on. + * @hs_req: The request to complete. + * @result: The result code (0 => Ok, otherwise errno) + * + * The given request has finished, so call the necessary completion + * if it has one and then look to see if we can start a new request + * on the endpoint. + * + * Note, expects the ep to already be locked as appropriate. + */ +static void s3c_hsotg_complete_request(struct dwc2_hsotg *hsotg, + struct s3c_hsotg_ep *hs_ep, + struct s3c_hsotg_req *hs_req, + int result) +{ + bool restart; + + if (!hs_req) { + dev_dbg(hsotg->dev, "%s: nothing to complete?\n", __func__); + return; + } + + dev_dbg(hsotg->dev, "complete: ep %p %s, req %p, %d => %p\n", + hs_ep, hs_ep->ep.name, hs_req, result, hs_req->req.complete); + + /* + * only replace the status if we've not already set an error + * from a previous transaction + */ + + if (hs_req->req.status == -EINPROGRESS) + hs_req->req.status = result; + + s3c_hsotg_handle_unaligned_buf_complete(hsotg, hs_ep, hs_req); + + hs_ep->req = NULL; + list_del_init(&hs_req->queue); + + if (using_dma(hsotg)) + s3c_hsotg_unmap_dma(hsotg, hs_ep, hs_req); + + /* + * call the complete request with the locks off, just in case the + * request tries to queue more work for this endpoint. + */ + + if (hs_req->req.complete) { + spin_unlock(&hsotg->lock); + usb_gadget_giveback_request(&hs_ep->ep, &hs_req->req); + spin_lock(&hsotg->lock); + } + + /* + * Look to see if there is anything else to do. Note, the completion + * of the previous request may have caused a new request to be started + * so be careful when doing this. + */ + + if (!hs_ep->req && result >= 0) { + restart = !list_empty(&hs_ep->queue); + if (restart) { + hs_req = get_ep_head(hs_ep); + s3c_hsotg_start_req(hsotg, hs_ep, hs_req, false); + } + } +} + +/** + * s3c_hsotg_rx_data - receive data from the FIFO for an endpoint + * @hsotg: The device state. + * @ep_idx: The endpoint index for the data + * @size: The size of data in the fifo, in bytes + * + * The FIFO status shows there is data to read from the FIFO for a given + * endpoint, so sort out whether we need to read the data into a request + * that has been made for that endpoint. + */ +static void s3c_hsotg_rx_data(struct dwc2_hsotg *hsotg, int ep_idx, int size) +{ + struct s3c_hsotg_ep *hs_ep = hsotg->eps_out[ep_idx]; + struct s3c_hsotg_req *hs_req = hs_ep->req; + void __iomem *fifo = hsotg->regs + EPFIFO(ep_idx); + int to_read; + int max_req; + int read_ptr; + + + if (!hs_req) { + u32 epctl = readl(hsotg->regs + DOEPCTL(ep_idx)); + int ptr; + + dev_dbg(hsotg->dev, + "%s: FIFO %d bytes on ep%d but no req (DXEPCTl=0x%08x)\n", + __func__, size, ep_idx, epctl); + + /* dump the data from the FIFO, we've nothing we can do */ + for (ptr = 0; ptr < size; ptr += 4) + (void)readl(fifo); + + return; + } + + to_read = size; + read_ptr = hs_req->req.actual; + max_req = hs_req->req.length - read_ptr; + + dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n", + __func__, to_read, max_req, read_ptr, hs_req->req.length); + + if (to_read > max_req) { + /* + * more data appeared than we where willing + * to deal with in this request. + */ + + /* currently we don't deal this */ + WARN_ON_ONCE(1); + } + + hs_ep->total_data += to_read; + hs_req->req.actual += to_read; + to_read = DIV_ROUND_UP(to_read, 4); + + /* + * note, we might over-write the buffer end by 3 bytes depending on + * alignment of the data. + */ + ioread32_rep(fifo, hs_req->req.buf + read_ptr, to_read); +} + +/** + * s3c_hsotg_ep0_zlp - send/receive zero-length packet on control endpoint + * @hsotg: The device instance + * @dir_in: If IN zlp + * + * Generate a zero-length IN packet request for terminating a SETUP + * transaction. + * + * Note, since we don't write any data to the TxFIFO, then it is + * currently believed that we do not need to wait for any space in + * the TxFIFO. + */ +static void s3c_hsotg_ep0_zlp(struct dwc2_hsotg *hsotg, bool dir_in) +{ + /* eps_out[0] is used in both directions */ + hsotg->eps_out[0]->dir_in = dir_in; + hsotg->ep0_state = dir_in ? DWC2_EP0_STATUS_IN : DWC2_EP0_STATUS_OUT; + + s3c_hsotg_program_zlp(hsotg, hsotg->eps_out[0]); +} + +/** + * s3c_hsotg_handle_outdone - handle receiving OutDone/SetupDone from RXFIFO + * @hsotg: The device instance + * @epnum: The endpoint received from + * + * The RXFIFO has delivered an OutDone event, which means that the data + * transfer for an OUT endpoint has been completed, either by a short + * packet or by the finish of a transfer. + */ +static void s3c_hsotg_handle_outdone(struct dwc2_hsotg *hsotg, int epnum) +{ + u32 epsize = readl(hsotg->regs + DOEPTSIZ(epnum)); + struct s3c_hsotg_ep *hs_ep = hsotg->eps_out[epnum]; + struct s3c_hsotg_req *hs_req = hs_ep->req; + struct usb_request *req = &hs_req->req; + unsigned size_left = DXEPTSIZ_XFERSIZE_GET(epsize); + int result = 0; + + if (!hs_req) { + dev_dbg(hsotg->dev, "%s: no request active\n", __func__); + return; + } + + if (epnum == 0 && hsotg->ep0_state == DWC2_EP0_STATUS_OUT) { + dev_dbg(hsotg->dev, "zlp packet received\n"); + s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, 0); + s3c_hsotg_enqueue_setup(hsotg); + return; + } + + if (using_dma(hsotg)) { + unsigned size_done; + + /* + * Calculate the size of the transfer by checking how much + * is left in the endpoint size register and then working it + * out from the amount we loaded for the transfer. + * + * We need to do this as DMA pointers are always 32bit aligned + * so may overshoot/undershoot the transfer. + */ + + size_done = hs_ep->size_loaded - size_left; + size_done += hs_ep->last_load; + + req->actual = size_done; + } + + /* if there is more request to do, schedule new transfer */ + if (req->actual < req->length && size_left == 0) { + s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true); + return; + } + + if (req->actual < req->length && req->short_not_ok) { + dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n", + __func__, req->actual, req->length); + + /* + * todo - what should we return here? there's no one else + * even bothering to check the status. + */ + } + + if (epnum == 0 && hsotg->ep0_state == DWC2_EP0_DATA_OUT) { + /* Move to STATUS IN */ + s3c_hsotg_ep0_zlp(hsotg, true); + return; + } + + s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, result); +} + +/** + * s3c_hsotg_read_frameno - read current frame number + * @hsotg: The device instance + * + * Return the current frame number + */ +static u32 s3c_hsotg_read_frameno(struct dwc2_hsotg *hsotg) +{ + u32 dsts; + + dsts = readl(hsotg->regs + DSTS); + dsts &= DSTS_SOFFN_MASK; + dsts >>= DSTS_SOFFN_SHIFT; + + return dsts; +} + +/** + * s3c_hsotg_handle_rx - RX FIFO has data + * @hsotg: The device instance + * + * The IRQ handler has detected that the RX FIFO has some data in it + * that requires processing, so find out what is in there and do the + * appropriate read. + * + * The RXFIFO is a true FIFO, the packets coming out are still in packet + * chunks, so if you have x packets received on an endpoint you'll get x + * FIFO events delivered, each with a packet's worth of data in it. + * + * When using DMA, we should not be processing events from the RXFIFO + * as the actual data should be sent to the memory directly and we turn + * on the completion interrupts to get notifications of transfer completion. + */ +static void s3c_hsotg_handle_rx(struct dwc2_hsotg *hsotg) +{ + u32 grxstsr = readl(hsotg->regs + GRXSTSP); + u32 epnum, status, size; + + WARN_ON(using_dma(hsotg)); + + epnum = grxstsr & GRXSTS_EPNUM_MASK; + status = grxstsr & GRXSTS_PKTSTS_MASK; + + size = grxstsr & GRXSTS_BYTECNT_MASK; + size >>= GRXSTS_BYTECNT_SHIFT; + + dev_dbg(hsotg->dev, "%s: GRXSTSP=0x%08x (%d@%d)\n", + __func__, grxstsr, size, epnum); + + switch ((status & GRXSTS_PKTSTS_MASK) >> GRXSTS_PKTSTS_SHIFT) { + case GRXSTS_PKTSTS_GLOBALOUTNAK: + dev_dbg(hsotg->dev, "GLOBALOUTNAK\n"); + break; + + case GRXSTS_PKTSTS_OUTDONE: + dev_dbg(hsotg->dev, "OutDone (Frame=0x%08x)\n", + s3c_hsotg_read_frameno(hsotg)); + + if (!using_dma(hsotg)) + s3c_hsotg_handle_outdone(hsotg, epnum); + break; + + case GRXSTS_PKTSTS_SETUPDONE: + dev_dbg(hsotg->dev, + "SetupDone (Frame=0x%08x, DOPEPCTL=0x%08x)\n", + s3c_hsotg_read_frameno(hsotg), + readl(hsotg->regs + DOEPCTL(0))); + /* + * Call s3c_hsotg_handle_outdone here if it was not called from + * GRXSTS_PKTSTS_OUTDONE. That is, if the core didn't + * generate GRXSTS_PKTSTS_OUTDONE for setup packet. + */ + if (hsotg->ep0_state == DWC2_EP0_SETUP) + s3c_hsotg_handle_outdone(hsotg, epnum); + break; + + case GRXSTS_PKTSTS_OUTRX: + s3c_hsotg_rx_data(hsotg, epnum, size); + break; + + case GRXSTS_PKTSTS_SETUPRX: + dev_dbg(hsotg->dev, + "SetupRX (Frame=0x%08x, DOPEPCTL=0x%08x)\n", + s3c_hsotg_read_frameno(hsotg), + readl(hsotg->regs + DOEPCTL(0))); + + WARN_ON(hsotg->ep0_state != DWC2_EP0_SETUP); + + s3c_hsotg_rx_data(hsotg, epnum, size); + break; + + default: + dev_warn(hsotg->dev, "%s: unknown status %08x\n", + __func__, grxstsr); + + s3c_hsotg_dump(hsotg); + break; + } +} + +/** + * s3c_hsotg_ep0_mps - turn max packet size into register setting + * @mps: The maximum packet size in bytes. + */ +static u32 s3c_hsotg_ep0_mps(unsigned int mps) +{ + switch (mps) { + case 64: + return D0EPCTL_MPS_64; + case 32: + return D0EPCTL_MPS_32; + case 16: + return D0EPCTL_MPS_16; + case 8: + return D0EPCTL_MPS_8; + } + + /* bad max packet size, warn and return invalid result */ + WARN_ON(1); + return (u32)-1; +} + +/** + * s3c_hsotg_set_ep_maxpacket - set endpoint's max-packet field + * @hsotg: The driver state. + * @ep: The index number of the endpoint + * @mps: The maximum packet size in bytes + * + * Configure the maximum packet size for the given endpoint, updating + * the hardware control registers to reflect this. + */ +static void s3c_hsotg_set_ep_maxpacket(struct dwc2_hsotg *hsotg, + unsigned int ep, unsigned int mps, unsigned int dir_in) +{ + struct s3c_hsotg_ep *hs_ep; + void __iomem *regs = hsotg->regs; + u32 mpsval; + u32 mcval; + u32 reg; + + hs_ep = index_to_ep(hsotg, ep, dir_in); + if (!hs_ep) + return; + + if (ep == 0) { + /* EP0 is a special case */ + mpsval = s3c_hsotg_ep0_mps(mps); + if (mpsval > 3) + goto bad_mps; + hs_ep->ep.maxpacket = mps; + hs_ep->mc = 1; + } else { + mpsval = mps & DXEPCTL_MPS_MASK; + if (mpsval > 1024) + goto bad_mps; + mcval = ((mps >> 11) & 0x3) + 1; + hs_ep->mc = mcval; + if (mcval > 3) + goto bad_mps; + hs_ep->ep.maxpacket = mpsval; + } + + if (dir_in) { + reg = readl(regs + DIEPCTL(ep)); + reg &= ~DXEPCTL_MPS_MASK; + reg |= mpsval; + writel(reg, regs + DIEPCTL(ep)); + } else { + reg = readl(regs + DOEPCTL(ep)); + reg &= ~DXEPCTL_MPS_MASK; + reg |= mpsval; + writel(reg, regs + DOEPCTL(ep)); + } + + return; + +bad_mps: + dev_err(hsotg->dev, "ep%d: bad mps of %d\n", ep, mps); +} + +/** + * s3c_hsotg_txfifo_flush - flush Tx FIFO + * @hsotg: The driver state + * @idx: The index for the endpoint (0..15) + */ +static void s3c_hsotg_txfifo_flush(struct dwc2_hsotg *hsotg, unsigned int idx) +{ + int timeout; + int val; + + writel(GRSTCTL_TXFNUM(idx) | GRSTCTL_TXFFLSH, + hsotg->regs + GRSTCTL); + + /* wait until the fifo is flushed */ + timeout = 100; + + while (1) { + val = readl(hsotg->regs + GRSTCTL); + + if ((val & (GRSTCTL_TXFFLSH)) == 0) + break; + + if (--timeout == 0) { + dev_err(hsotg->dev, + "%s: timeout flushing fifo (GRSTCTL=%08x)\n", + __func__, val); + break; + } + + udelay(1); + } +} + +/** + * s3c_hsotg_trytx - check to see if anything needs transmitting + * @hsotg: The driver state + * @hs_ep: The driver endpoint to check. + * + * Check to see if there is a request that has data to send, and if so + * make an attempt to write data into the FIFO. + */ +static int s3c_hsotg_trytx(struct dwc2_hsotg *hsotg, + struct s3c_hsotg_ep *hs_ep) +{ + struct s3c_hsotg_req *hs_req = hs_ep->req; + + if (!hs_ep->dir_in || !hs_req) { + /** + * if request is not enqueued, we disable interrupts + * for endpoints, excepting ep0 + */ + if (hs_ep->index != 0) + s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, + hs_ep->dir_in, 0); + return 0; + } + + if (hs_req->req.actual < hs_req->req.length) { + dev_dbg(hsotg->dev, "trying to write more for ep%d\n", + hs_ep->index); + return s3c_hsotg_write_fifo(hsotg, hs_ep, hs_req); + } + + return 0; +} + +/** + * s3c_hsotg_complete_in - complete IN transfer + * @hsotg: The device state. + * @hs_ep: The endpoint that has just completed. + * + * An IN transfer has been completed, update the transfer's state and then + * call the relevant completion routines. + */ +static void s3c_hsotg_complete_in(struct dwc2_hsotg *hsotg, + struct s3c_hsotg_ep *hs_ep) +{ + struct s3c_hsotg_req *hs_req = hs_ep->req; + u32 epsize = readl(hsotg->regs + DIEPTSIZ(hs_ep->index)); + int size_left, size_done; + + if (!hs_req) { + dev_dbg(hsotg->dev, "XferCompl but no req\n"); + return; + } + + /* Finish ZLP handling for IN EP0 transactions */ + if (hs_ep->index == 0 && hsotg->ep0_state == DWC2_EP0_STATUS_IN) { + dev_dbg(hsotg->dev, "zlp packet sent\n"); + s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, 0); + if (hsotg->test_mode) { + int ret; + + ret = s3c_hsotg_set_test_mode(hsotg, hsotg->test_mode); + if (ret < 0) { + dev_dbg(hsotg->dev, "Invalid Test #%d\n", + hsotg->test_mode); + s3c_hsotg_stall_ep0(hsotg); + return; + } + } + s3c_hsotg_enqueue_setup(hsotg); + return; + } + + /* + * Calculate the size of the transfer by checking how much is left + * in the endpoint size register and then working it out from + * the amount we loaded for the transfer. + * + * We do this even for DMA, as the transfer may have incremented + * past the end of the buffer (DMA transfers are always 32bit + * aligned). + */ + + size_left = DXEPTSIZ_XFERSIZE_GET(epsize); + + size_done = hs_ep->size_loaded - size_left; + size_done += hs_ep->last_load; + + if (hs_req->req.actual != size_done) + dev_dbg(hsotg->dev, "%s: adjusting size done %d => %d\n", + __func__, hs_req->req.actual, size_done); + + hs_req->req.actual = size_done; + dev_dbg(hsotg->dev, "req->length:%d req->actual:%d req->zero:%d\n", + hs_req->req.length, hs_req->req.actual, hs_req->req.zero); + + if (!size_left && hs_req->req.actual < hs_req->req.length) { + dev_dbg(hsotg->dev, "%s trying more for req...\n", __func__); + s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true); + return; + } + + /* Zlp for all endpoints, for ep0 only in DATA IN stage */ + if (hs_ep->send_zlp) { + s3c_hsotg_program_zlp(hsotg, hs_ep); + hs_ep->send_zlp = 0; + /* transfer will be completed on next complete interrupt */ + return; + } + + if (hs_ep->index == 0 && hsotg->ep0_state == DWC2_EP0_DATA_IN) { + /* Move to STATUS OUT */ + s3c_hsotg_ep0_zlp(hsotg, false); + return; + } + + s3c_hsotg_complete_request(hsotg, hs_ep, hs_req, 0); +} + +/** + * s3c_hsotg_epint - handle an in/out endpoint interrupt + * @hsotg: The driver state + * @idx: The index for the endpoint (0..15) + * @dir_in: Set if this is an IN endpoint + * + * Process and clear any interrupt pending for an individual endpoint + */ +static void s3c_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx, + int dir_in) +{ + struct s3c_hsotg_ep *hs_ep = index_to_ep(hsotg, idx, dir_in); + u32 epint_reg = dir_in ? DIEPINT(idx) : DOEPINT(idx); + u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx); + u32 epsiz_reg = dir_in ? DIEPTSIZ(idx) : DOEPTSIZ(idx); + u32 ints; + u32 ctrl; + + ints = readl(hsotg->regs + epint_reg); + ctrl = readl(hsotg->regs + epctl_reg); + + /* Clear endpoint interrupts */ + writel(ints, hsotg->regs + epint_reg); + + if (!hs_ep) { + dev_err(hsotg->dev, "%s:Interrupt for unconfigured ep%d(%s)\n", + __func__, idx, dir_in ? "in" : "out"); + return; + } + + dev_dbg(hsotg->dev, "%s: ep%d(%s) DxEPINT=0x%08x\n", + __func__, idx, dir_in ? "in" : "out", ints); + + /* Don't process XferCompl interrupt if it is a setup packet */ + if (idx == 0 && (ints & (DXEPINT_SETUP | DXEPINT_SETUP_RCVD))) + ints &= ~DXEPINT_XFERCOMPL; + + if (ints & DXEPINT_XFERCOMPL) { + if (hs_ep->isochronous && hs_ep->interval == 1) { + if (ctrl & DXEPCTL_EOFRNUM) + ctrl |= DXEPCTL_SETEVENFR; + else + ctrl |= DXEPCTL_SETODDFR; + writel(ctrl, hsotg->regs + epctl_reg); + } + + dev_dbg(hsotg->dev, + "%s: XferCompl: DxEPCTL=0x%08x, DXEPTSIZ=%08x\n", + __func__, readl(hsotg->regs + epctl_reg), + readl(hsotg->regs + epsiz_reg)); + + /* + * we get OutDone from the FIFO, so we only need to look + * at completing IN requests here + */ + if (dir_in) { + s3c_hsotg_complete_in(hsotg, hs_ep); + + if (idx == 0 && !hs_ep->req) + s3c_hsotg_enqueue_setup(hsotg); + } else if (using_dma(hsotg)) { + /* + * We're using DMA, we need to fire an OutDone here + * as we ignore the RXFIFO. + */ + + s3c_hsotg_handle_outdone(hsotg, idx); + } + } + + if (ints & DXEPINT_EPDISBLD) { + dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__); + + if (dir_in) { + int epctl = readl(hsotg->regs + epctl_reg); + + s3c_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index); + + if ((epctl & DXEPCTL_STALL) && + (epctl & DXEPCTL_EPTYPE_BULK)) { + int dctl = readl(hsotg->regs + DCTL); + + dctl |= DCTL_CGNPINNAK; + writel(dctl, hsotg->regs + DCTL); + } + } + } + + if (ints & DXEPINT_AHBERR) + dev_dbg(hsotg->dev, "%s: AHBErr\n", __func__); + + if (ints & DXEPINT_SETUP) { /* Setup or Timeout */ + dev_dbg(hsotg->dev, "%s: Setup/Timeout\n", __func__); + + if (using_dma(hsotg) && idx == 0) { + /* + * this is the notification we've received a + * setup packet. In non-DMA mode we'd get this + * from the RXFIFO, instead we need to process + * the setup here. + */ + + if (dir_in) + WARN_ON_ONCE(1); + else + s3c_hsotg_handle_outdone(hsotg, 0); + } + } + + if (ints & DXEPINT_BACK2BACKSETUP) + dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__); + + if (dir_in && !hs_ep->isochronous) { + /* not sure if this is important, but we'll clear it anyway */ + if (ints & DIEPMSK_INTKNTXFEMPMSK) { + dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n", + __func__, idx); + } + + /* this probably means something bad is happening */ + if (ints & DIEPMSK_INTKNEPMISMSK) { + dev_warn(hsotg->dev, "%s: ep%d: INTknEP\n", + __func__, idx); + } + + /* FIFO has space or is empty (see GAHBCFG) */ + if (hsotg->dedicated_fifos && + ints & DIEPMSK_TXFIFOEMPTY) { + dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n", + __func__, idx); + if (!using_dma(hsotg)) + s3c_hsotg_trytx(hsotg, hs_ep); + } + } +} + +/** + * s3c_hsotg_irq_enumdone - Handle EnumDone interrupt (enumeration done) + * @hsotg: The device state. + * + * Handle updating the device settings after the enumeration phase has + * been completed. + */ +static void s3c_hsotg_irq_enumdone(struct dwc2_hsotg *hsotg) +{ + u32 dsts = readl(hsotg->regs + DSTS); + int ep0_mps = 0, ep_mps = 8; + + /* + * This should signal the finish of the enumeration phase + * of the USB handshaking, so we should now know what rate + * we connected at. + */ + + dev_dbg(hsotg->dev, "EnumDone (DSTS=0x%08x)\n", dsts); + + /* + * note, since we're limited by the size of transfer on EP0, and + * it seems IN transfers must be a even number of packets we do + * not advertise a 64byte MPS on EP0. + */ + + /* catch both EnumSpd_FS and EnumSpd_FS48 */ + switch (dsts & DSTS_ENUMSPD_MASK) { + case DSTS_ENUMSPD_FS: + case DSTS_ENUMSPD_FS48: + hsotg->gadget.speed = USB_SPEED_FULL; + ep0_mps = EP0_MPS_LIMIT; + ep_mps = 1023; + break; + + case DSTS_ENUMSPD_HS: + hsotg->gadget.speed = USB_SPEED_HIGH; + ep0_mps = EP0_MPS_LIMIT; + ep_mps = 1024; + break; + + case DSTS_ENUMSPD_LS: + hsotg->gadget.speed = USB_SPEED_LOW; + /* + * note, we don't actually support LS in this driver at the + * moment, and the documentation seems to imply that it isn't + * supported by the PHYs on some of the devices. + */ + break; + } + dev_info(hsotg->dev, "new device is %s\n", + usb_speed_string(hsotg->gadget.speed)); + + /* + * we should now know the maximum packet size for an + * endpoint, so set the endpoints to a default value. + */ + + if (ep0_mps) { + int i; + /* Initialize ep0 for both in and out directions */ + s3c_hsotg_set_ep_maxpacket(hsotg, 0, ep0_mps, 1); + s3c_hsotg_set_ep_maxpacket(hsotg, 0, ep0_mps, 0); + for (i = 1; i < hsotg->num_of_eps; i++) { + if (hsotg->eps_in[i]) + s3c_hsotg_set_ep_maxpacket(hsotg, i, ep_mps, 1); + if (hsotg->eps_out[i]) + s3c_hsotg_set_ep_maxpacket(hsotg, i, ep_mps, 0); + } + } + + /* ensure after enumeration our EP0 is active */ + + s3c_hsotg_enqueue_setup(hsotg); + + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + readl(hsotg->regs + DIEPCTL0), + readl(hsotg->regs + DOEPCTL0)); +} + +/** + * kill_all_requests - remove all requests from the endpoint's queue + * @hsotg: The device state. + * @ep: The endpoint the requests may be on. + * @result: The result code to use. + * + * Go through the requests on the given endpoint and mark them + * completed with the given result code. + */ +static void kill_all_requests(struct dwc2_hsotg *hsotg, + struct s3c_hsotg_ep *ep, + int result) +{ + struct s3c_hsotg_req *req, *treq; + unsigned size; + + ep->req = NULL; + + list_for_each_entry_safe(req, treq, &ep->queue, queue) + s3c_hsotg_complete_request(hsotg, ep, req, + result); + + if (!hsotg->dedicated_fifos) + return; + size = (readl(hsotg->regs + DTXFSTS(ep->index)) & 0xffff) * 4; + if (size < ep->fifo_size) + s3c_hsotg_txfifo_flush(hsotg, ep->fifo_index); +} + +/** + * s3c_hsotg_disconnect - disconnect service + * @hsotg: The device state. + * + * The device has been disconnected. Remove all current + * transactions and signal the gadget driver that this + * has happened. + */ +void s3c_hsotg_disconnect(struct dwc2_hsotg *hsotg) +{ + unsigned ep; + + if (!hsotg->connected) + return; + + hsotg->connected = 0; + hsotg->test_mode = 0; + + for (ep = 0; ep < hsotg->num_of_eps; ep++) { + if (hsotg->eps_in[ep]) + kill_all_requests(hsotg, hsotg->eps_in[ep], + -ESHUTDOWN); + if (hsotg->eps_out[ep]) + kill_all_requests(hsotg, hsotg->eps_out[ep], + -ESHUTDOWN); + } + + call_gadget(hsotg, disconnect); +} +EXPORT_SYMBOL_GPL(s3c_hsotg_disconnect); + +/** + * s3c_hsotg_irq_fifoempty - TX FIFO empty interrupt handler + * @hsotg: The device state: + * @periodic: True if this is a periodic FIFO interrupt + */ +static void s3c_hsotg_irq_fifoempty(struct dwc2_hsotg *hsotg, bool periodic) +{ + struct s3c_hsotg_ep *ep; + int epno, ret; + + /* look through for any more data to transmit */ + for (epno = 0; epno < hsotg->num_of_eps; epno++) { + ep = index_to_ep(hsotg, epno, 1); + + if (!ep) + continue; + + if (!ep->dir_in) + continue; + + if ((periodic && !ep->periodic) || + (!periodic && ep->periodic)) + continue; + + ret = s3c_hsotg_trytx(hsotg, ep); + if (ret < 0) + break; + } +} + +/* IRQ flags which will trigger a retry around the IRQ loop */ +#define IRQ_RETRY_MASK (GINTSTS_NPTXFEMP | \ + GINTSTS_PTXFEMP | \ + GINTSTS_RXFLVL) + +/** + * s3c_hsotg_corereset - issue softreset to the core + * @hsotg: The device state + * + * Issue a soft reset to the core, and await the core finishing it. + */ +static int s3c_hsotg_corereset(struct dwc2_hsotg *hsotg) +{ + int timeout; + u32 grstctl; + + dev_dbg(hsotg->dev, "resetting core\n"); + + /* issue soft reset */ + writel(GRSTCTL_CSFTRST, hsotg->regs + GRSTCTL); + + timeout = 10000; + do { + grstctl = readl(hsotg->regs + GRSTCTL); + } while ((grstctl & GRSTCTL_CSFTRST) && timeout-- > 0); + + if (grstctl & GRSTCTL_CSFTRST) { + dev_err(hsotg->dev, "Failed to get CSftRst asserted\n"); + return -EINVAL; + } + + timeout = 10000; + + while (1) { + u32 grstctl = readl(hsotg->regs + GRSTCTL); + + if (timeout-- < 0) { + dev_info(hsotg->dev, + "%s: reset failed, GRSTCTL=%08x\n", + __func__, grstctl); + return -ETIMEDOUT; + } + + if (!(grstctl & GRSTCTL_AHBIDLE)) + continue; + + break; /* reset done */ + } + + dev_dbg(hsotg->dev, "reset successful\n"); + return 0; +} + +/** + * s3c_hsotg_core_init - issue softreset to the core + * @hsotg: The device state + * + * Issue a soft reset to the core, and await the core finishing it. + */ +void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg, + bool is_usb_reset) +{ + u32 val; + + if (!is_usb_reset) + s3c_hsotg_corereset(hsotg); + + /* + * we must now enable ep0 ready for host detection and then + * set configuration. + */ + + /* set the PLL on, remove the HNP/SRP and set the PHY */ + val = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5; + writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) | + (val << GUSBCFG_USBTRDTIM_SHIFT), hsotg->regs + GUSBCFG); + + s3c_hsotg_init_fifo(hsotg); + + if (!is_usb_reset) + __orr32(hsotg->regs + DCTL, DCTL_SFTDISCON); + + writel(DCFG_EPMISCNT(1) | DCFG_DEVSPD_HS, hsotg->regs + DCFG); + + /* Clear any pending OTG interrupts */ + writel(0xffffffff, hsotg->regs + GOTGINT); + + /* Clear any pending interrupts */ + writel(0xffffffff, hsotg->regs + GINTSTS); + + writel(GINTSTS_ERLYSUSP | GINTSTS_SESSREQINT | + GINTSTS_GOUTNAKEFF | GINTSTS_GINNAKEFF | + GINTSTS_CONIDSTSCHNG | GINTSTS_USBRST | + GINTSTS_ENUMDONE | GINTSTS_OTGINT | + GINTSTS_USBSUSP | GINTSTS_WKUPINT, + hsotg->regs + GINTMSK); + + if (using_dma(hsotg)) + writel(GAHBCFG_GLBL_INTR_EN | GAHBCFG_DMA_EN | + (GAHBCFG_HBSTLEN_INCR4 << GAHBCFG_HBSTLEN_SHIFT), + hsotg->regs + GAHBCFG); + else + writel(((hsotg->dedicated_fifos) ? (GAHBCFG_NP_TXF_EMP_LVL | + GAHBCFG_P_TXF_EMP_LVL) : 0) | + GAHBCFG_GLBL_INTR_EN, + hsotg->regs + GAHBCFG); + + /* + * If INTknTXFEmpMsk is enabled, it's important to disable ep interrupts + * when we have no data to transfer. Otherwise we get being flooded by + * interrupts. + */ + + writel(((hsotg->dedicated_fifos && !using_dma(hsotg)) ? + DIEPMSK_TXFIFOEMPTY | DIEPMSK_INTKNTXFEMPMSK : 0) | + DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK | + DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK | + DIEPMSK_INTKNEPMISMSK, + hsotg->regs + DIEPMSK); + + /* + * don't need XferCompl, we get that from RXFIFO in slave mode. In + * DMA mode we may need this. + */ + writel((using_dma(hsotg) ? (DIEPMSK_XFERCOMPLMSK | + DIEPMSK_TIMEOUTMSK) : 0) | + DOEPMSK_EPDISBLDMSK | DOEPMSK_AHBERRMSK | + DOEPMSK_SETUPMSK, + hsotg->regs + DOEPMSK); + + writel(0, hsotg->regs + DAINTMSK); + + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + readl(hsotg->regs + DIEPCTL0), + readl(hsotg->regs + DOEPCTL0)); + + /* enable in and out endpoint interrupts */ + s3c_hsotg_en_gsint(hsotg, GINTSTS_OEPINT | GINTSTS_IEPINT); + + /* + * Enable the RXFIFO when in slave mode, as this is how we collect + * the data. In DMA mode, we get events from the FIFO but also + * things we cannot process, so do not use it. + */ + if (!using_dma(hsotg)) + s3c_hsotg_en_gsint(hsotg, GINTSTS_RXFLVL); + + /* Enable interrupts for EP0 in and out */ + s3c_hsotg_ctrl_epint(hsotg, 0, 0, 1); + s3c_hsotg_ctrl_epint(hsotg, 0, 1, 1); + + if (!is_usb_reset) { + __orr32(hsotg->regs + DCTL, DCTL_PWRONPRGDONE); + udelay(10); /* see openiboot */ + __bic32(hsotg->regs + DCTL, DCTL_PWRONPRGDONE); + } + + dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + DCTL)); + + /* + * DxEPCTL_USBActEp says RO in manual, but seems to be set by + * writing to the EPCTL register.. + */ + + /* set to read 1 8byte packet */ + writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) | + DXEPTSIZ_XFERSIZE(8), hsotg->regs + DOEPTSIZ0); + + writel(s3c_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) | + DXEPCTL_CNAK | DXEPCTL_EPENA | + DXEPCTL_USBACTEP, + hsotg->regs + DOEPCTL0); + + /* enable, but don't activate EP0in */ + writel(s3c_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) | + DXEPCTL_USBACTEP, hsotg->regs + DIEPCTL0); + + s3c_hsotg_enqueue_setup(hsotg); + + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + readl(hsotg->regs + DIEPCTL0), + readl(hsotg->regs + DOEPCTL0)); + + /* clear global NAKs */ + val = DCTL_CGOUTNAK | DCTL_CGNPINNAK; + if (!is_usb_reset) + val |= DCTL_SFTDISCON; + __orr32(hsotg->regs + DCTL, val); + + /* must be at-least 3ms to allow bus to see disconnect */ + mdelay(3); + + hsotg->last_rst = jiffies; +} + +static void s3c_hsotg_core_disconnect(struct dwc2_hsotg *hsotg) +{ + /* set the soft-disconnect bit */ + __orr32(hsotg->regs + DCTL, DCTL_SFTDISCON); +} + +void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg) +{ + /* remove the soft-disconnect and let's go */ + __bic32(hsotg->regs + DCTL, DCTL_SFTDISCON); +} + +/** + * s3c_hsotg_irq - handle device interrupt + * @irq: The IRQ number triggered + * @pw: The pw value when registered the handler. + */ +static irqreturn_t s3c_hsotg_irq(int irq, void *pw) +{ + struct dwc2_hsotg *hsotg = pw; + int retry_count = 8; + u32 gintsts; + u32 gintmsk; + + spin_lock(&hsotg->lock); +irq_retry: + gintsts = readl(hsotg->regs + GINTSTS); + gintmsk = readl(hsotg->regs + GINTMSK); + + dev_dbg(hsotg->dev, "%s: %08x %08x (%08x) retry %d\n", + __func__, gintsts, gintsts & gintmsk, gintmsk, retry_count); + + gintsts &= gintmsk; + + if (gintsts & GINTSTS_ENUMDONE) { + writel(GINTSTS_ENUMDONE, hsotg->regs + GINTSTS); + + s3c_hsotg_irq_enumdone(hsotg); + } + + if (gintsts & (GINTSTS_OEPINT | GINTSTS_IEPINT)) { + u32 daint = readl(hsotg->regs + DAINT); + u32 daintmsk = readl(hsotg->regs + DAINTMSK); + u32 daint_out, daint_in; + int ep; + + daint &= daintmsk; + daint_out = daint >> DAINT_OUTEP_SHIFT; + daint_in = daint & ~(daint_out << DAINT_OUTEP_SHIFT); + + dev_dbg(hsotg->dev, "%s: daint=%08x\n", __func__, daint); + + for (ep = 0; ep < hsotg->num_of_eps && daint_out; + ep++, daint_out >>= 1) { + if (daint_out & 1) + s3c_hsotg_epint(hsotg, ep, 0); + } + + for (ep = 0; ep < hsotg->num_of_eps && daint_in; + ep++, daint_in >>= 1) { + if (daint_in & 1) + s3c_hsotg_epint(hsotg, ep, 1); + } + } + + if (gintsts & GINTSTS_USBRST) { + + u32 usb_status = readl(hsotg->regs + GOTGCTL); + + dev_dbg(hsotg->dev, "%s: USBRst\n", __func__); + dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n", + readl(hsotg->regs + GNPTXSTS)); + + writel(GINTSTS_USBRST, hsotg->regs + GINTSTS); + + /* Report disconnection if it is not already done. */ + s3c_hsotg_disconnect(hsotg); + + if (usb_status & GOTGCTL_BSESVLD) { + if (time_after(jiffies, hsotg->last_rst + + msecs_to_jiffies(200))) { + + kill_all_requests(hsotg, hsotg->eps_out[0], + -ECONNRESET); + + s3c_hsotg_core_init_disconnected(hsotg, true); + } + } + } + + /* check both FIFOs */ + + if (gintsts & GINTSTS_NPTXFEMP) { + dev_dbg(hsotg->dev, "NPTxFEmp\n"); + + /* + * Disable the interrupt to stop it happening again + * unless one of these endpoint routines decides that + * it needs re-enabling + */ + + s3c_hsotg_disable_gsint(hsotg, GINTSTS_NPTXFEMP); + s3c_hsotg_irq_fifoempty(hsotg, false); + } + + if (gintsts & GINTSTS_PTXFEMP) { + dev_dbg(hsotg->dev, "PTxFEmp\n"); + + /* See note in GINTSTS_NPTxFEmp */ + + s3c_hsotg_disable_gsint(hsotg, GINTSTS_PTXFEMP); + s3c_hsotg_irq_fifoempty(hsotg, true); + } + + if (gintsts & GINTSTS_RXFLVL) { + /* + * note, since GINTSTS_RxFLvl doubles as FIFO-not-empty, + * we need to retry s3c_hsotg_handle_rx if this is still + * set. + */ + + s3c_hsotg_handle_rx(hsotg); + } + + if (gintsts & GINTSTS_ERLYSUSP) { + dev_dbg(hsotg->dev, "GINTSTS_ErlySusp\n"); + writel(GINTSTS_ERLYSUSP, hsotg->regs + GINTSTS); + } + + /* + * these next two seem to crop-up occasionally causing the core + * to shutdown the USB transfer, so try clearing them and logging + * the occurrence. + */ + + if (gintsts & GINTSTS_GOUTNAKEFF) { + dev_info(hsotg->dev, "GOUTNakEff triggered\n"); + + writel(DCTL_CGOUTNAK, hsotg->regs + DCTL); + + s3c_hsotg_dump(hsotg); + } + + if (gintsts & GINTSTS_GINNAKEFF) { + dev_info(hsotg->dev, "GINNakEff triggered\n"); + + writel(DCTL_CGNPINNAK, hsotg->regs + DCTL); + + s3c_hsotg_dump(hsotg); + } + + /* + * if we've had fifo events, we should try and go around the + * loop again to see if there's any point in returning yet. + */ + + if (gintsts & IRQ_RETRY_MASK && --retry_count > 0) + goto irq_retry; + + spin_unlock(&hsotg->lock); + + return IRQ_HANDLED; +} + +/** + * s3c_hsotg_ep_enable - enable the given endpoint + * @ep: The USB endpint to configure + * @desc: The USB endpoint descriptor to configure with. + * + * This is called from the USB gadget code's usb_ep_enable(). + */ +static int s3c_hsotg_ep_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + struct s3c_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hsotg = hs_ep->parent; + unsigned long flags; + unsigned int index = hs_ep->index; + u32 epctrl_reg; + u32 epctrl; + u32 mps; + unsigned int dir_in; + unsigned int i, val, size; + int ret = 0; + + dev_dbg(hsotg->dev, + "%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n", + __func__, ep->name, desc->bEndpointAddress, desc->bmAttributes, + desc->wMaxPacketSize, desc->bInterval); + + /* not to be called for EP0 */ + WARN_ON(index == 0); + + dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0; + if (dir_in != hs_ep->dir_in) { + dev_err(hsotg->dev, "%s: direction mismatch!\n", __func__); + return -EINVAL; + } + + mps = usb_endpoint_maxp(desc); + + /* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */ + + epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); + epctrl = readl(hsotg->regs + epctrl_reg); + + dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n", + __func__, epctrl, epctrl_reg); + + spin_lock_irqsave(&hsotg->lock, flags); + + epctrl &= ~(DXEPCTL_EPTYPE_MASK | DXEPCTL_MPS_MASK); + epctrl |= DXEPCTL_MPS(mps); + + /* + * mark the endpoint as active, otherwise the core may ignore + * transactions entirely for this endpoint + */ + epctrl |= DXEPCTL_USBACTEP; + + /* + * set the NAK status on the endpoint, otherwise we might try and + * do something with data that we've yet got a request to process + * since the RXFIFO will take data for an endpoint even if the + * size register hasn't been set. + */ + + epctrl |= DXEPCTL_SNAK; + + /* update the endpoint state */ + s3c_hsotg_set_ep_maxpacket(hsotg, hs_ep->index, mps, dir_in); + + /* default, set to non-periodic */ + hs_ep->isochronous = 0; + hs_ep->periodic = 0; + hs_ep->halted = 0; + hs_ep->interval = desc->bInterval; + + if (hs_ep->interval > 1 && hs_ep->mc > 1) + dev_err(hsotg->dev, "MC > 1 when interval is not 1\n"); + + switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + case USB_ENDPOINT_XFER_ISOC: + epctrl |= DXEPCTL_EPTYPE_ISO; + epctrl |= DXEPCTL_SETEVENFR; + hs_ep->isochronous = 1; + if (dir_in) + hs_ep->periodic = 1; + break; + + case USB_ENDPOINT_XFER_BULK: + epctrl |= DXEPCTL_EPTYPE_BULK; + break; + + case USB_ENDPOINT_XFER_INT: + if (dir_in) + hs_ep->periodic = 1; + + epctrl |= DXEPCTL_EPTYPE_INTERRUPT; + break; + + case USB_ENDPOINT_XFER_CONTROL: + epctrl |= DXEPCTL_EPTYPE_CONTROL; + break; + } + + /* If fifo is already allocated for this ep */ + if (hs_ep->fifo_index) { + size = hs_ep->ep.maxpacket * hs_ep->mc; + /* If bigger fifo is required deallocate current one */ + if (size > hs_ep->fifo_size) { + hsotg->fifo_map &= ~(1 << hs_ep->fifo_index); + hs_ep->fifo_index = 0; + hs_ep->fifo_size = 0; + } + } + + /* + * if the hardware has dedicated fifos, we must give each IN EP + * a unique tx-fifo even if it is non-periodic. + */ + if (dir_in && hsotg->dedicated_fifos && !hs_ep->fifo_index) { + u32 fifo_index = 0; + u32 fifo_size = UINT_MAX; + size = hs_ep->ep.maxpacket*hs_ep->mc; + for (i = 1; i < hsotg->num_of_eps; ++i) { + if (hsotg->fifo_map & (1<<i)) + continue; + val = readl(hsotg->regs + DPTXFSIZN(i)); + val = (val >> FIFOSIZE_DEPTH_SHIFT)*4; + if (val < size) + continue; + /* Search for smallest acceptable fifo */ + if (val < fifo_size) { + fifo_size = val; + fifo_index = i; + } + } + if (!fifo_index) { + dev_err(hsotg->dev, + "%s: No suitable fifo found\n", __func__); + ret = -ENOMEM; + goto error; + } + hsotg->fifo_map |= 1 << fifo_index; + epctrl |= DXEPCTL_TXFNUM(fifo_index); + hs_ep->fifo_index = fifo_index; + hs_ep->fifo_size = fifo_size; + } + + /* for non control endpoints, set PID to D0 */ + if (index) + epctrl |= DXEPCTL_SETD0PID; + + dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n", + __func__, epctrl); + + writel(epctrl, hsotg->regs + epctrl_reg); + dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x\n", + __func__, readl(hsotg->regs + epctrl_reg)); + + /* enable the endpoint interrupt */ + s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1); + +error: + spin_unlock_irqrestore(&hsotg->lock, flags); + return ret; +} + +/** + * s3c_hsotg_ep_disable - disable given endpoint + * @ep: The endpoint to disable. + */ +static int s3c_hsotg_ep_disable_force(struct usb_ep *ep, bool force) +{ + struct s3c_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hsotg = hs_ep->parent; + int dir_in = hs_ep->dir_in; + int index = hs_ep->index; + unsigned long flags; + u32 epctrl_reg; + u32 ctrl; + + dev_dbg(hsotg->dev, "%s(ep %p)\n", __func__, ep); + + if (ep == &hsotg->eps_out[0]->ep) { + dev_err(hsotg->dev, "%s: called for ep0\n", __func__); + return -EINVAL; + } + + epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); + + spin_lock_irqsave(&hsotg->lock, flags); + + hsotg->fifo_map &= ~(1<<hs_ep->fifo_index); + hs_ep->fifo_index = 0; + hs_ep->fifo_size = 0; + + ctrl = readl(hsotg->regs + epctrl_reg); + ctrl &= ~DXEPCTL_EPENA; + ctrl &= ~DXEPCTL_USBACTEP; + ctrl |= DXEPCTL_SNAK; + + dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl); + writel(ctrl, hsotg->regs + epctrl_reg); + + /* disable endpoint interrupts */ + s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 0); + + /* terminate all requests with shutdown */ + kill_all_requests(hsotg, hs_ep, -ESHUTDOWN); + + spin_unlock_irqrestore(&hsotg->lock, flags); + return 0; +} + +static int s3c_hsotg_ep_disable(struct usb_ep *ep) +{ + return s3c_hsotg_ep_disable_force(ep, false); +} +/** + * on_list - check request is on the given endpoint + * @ep: The endpoint to check. + * @test: The request to test if it is on the endpoint. + */ +static bool on_list(struct s3c_hsotg_ep *ep, struct s3c_hsotg_req *test) +{ + struct s3c_hsotg_req *req, *treq; + + list_for_each_entry_safe(req, treq, &ep->queue, queue) { + if (req == test) + return true; + } + + return false; +} + +/** + * s3c_hsotg_ep_dequeue - dequeue given endpoint + * @ep: The endpoint to dequeue. + * @req: The request to be removed from a queue. + */ +static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req) +{ + struct s3c_hsotg_req *hs_req = our_req(req); + struct s3c_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hs = hs_ep->parent; + unsigned long flags; + + dev_dbg(hs->dev, "ep_dequeue(%p,%p)\n", ep, req); + + spin_lock_irqsave(&hs->lock, flags); + + if (!on_list(hs_ep, hs_req)) { + spin_unlock_irqrestore(&hs->lock, flags); + return -EINVAL; + } + + s3c_hsotg_complete_request(hs, hs_ep, hs_req, -ECONNRESET); + spin_unlock_irqrestore(&hs->lock, flags); + + return 0; +} + +/** + * s3c_hsotg_ep_sethalt - set halt on a given endpoint + * @ep: The endpoint to set halt. + * @value: Set or unset the halt. + */ +static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value) +{ + struct s3c_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hs = hs_ep->parent; + int index = hs_ep->index; + u32 epreg; + u32 epctl; + u32 xfertype; + + dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value); + + if (index == 0) { + if (value) + s3c_hsotg_stall_ep0(hs); + else + dev_warn(hs->dev, + "%s: can't clear halt on ep0\n", __func__); + return 0; + } + + if (hs_ep->dir_in) { + epreg = DIEPCTL(index); + epctl = readl(hs->regs + epreg); + + if (value) { + epctl |= DXEPCTL_STALL + DXEPCTL_SNAK; + if (epctl & DXEPCTL_EPENA) + epctl |= DXEPCTL_EPDIS; + } else { + epctl &= ~DXEPCTL_STALL; + xfertype = epctl & DXEPCTL_EPTYPE_MASK; + if (xfertype == DXEPCTL_EPTYPE_BULK || + xfertype == DXEPCTL_EPTYPE_INTERRUPT) + epctl |= DXEPCTL_SETD0PID; + } + writel(epctl, hs->regs + epreg); + } else { + + epreg = DOEPCTL(index); + epctl = readl(hs->regs + epreg); + + if (value) + epctl |= DXEPCTL_STALL; + else { + epctl &= ~DXEPCTL_STALL; + xfertype = epctl & DXEPCTL_EPTYPE_MASK; + if (xfertype == DXEPCTL_EPTYPE_BULK || + xfertype == DXEPCTL_EPTYPE_INTERRUPT) + epctl |= DXEPCTL_SETD0PID; + } + writel(epctl, hs->regs + epreg); + } + + hs_ep->halted = value; + + return 0; +} + +/** + * s3c_hsotg_ep_sethalt_lock - set halt on a given endpoint with lock held + * @ep: The endpoint to set halt. + * @value: Set or unset the halt. + */ +static int s3c_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value) +{ + struct s3c_hsotg_ep *hs_ep = our_ep(ep); + struct dwc2_hsotg *hs = hs_ep->parent; + unsigned long flags = 0; + int ret = 0; + + spin_lock_irqsave(&hs->lock, flags); + ret = s3c_hsotg_ep_sethalt(ep, value); + spin_unlock_irqrestore(&hs->lock, flags); + + return ret; +} + +static struct usb_ep_ops s3c_hsotg_ep_ops = { + .enable = s3c_hsotg_ep_enable, + .disable = s3c_hsotg_ep_disable, + .alloc_request = s3c_hsotg_ep_alloc_request, + .free_request = s3c_hsotg_ep_free_request, + .queue = s3c_hsotg_ep_queue_lock, + .dequeue = s3c_hsotg_ep_dequeue, + .set_halt = s3c_hsotg_ep_sethalt_lock, + /* note, don't believe we have any call for the fifo routines */ +}; + +/** + * s3c_hsotg_phy_enable - enable platform phy dev + * @hsotg: The driver state + * + * A wrapper for platform code responsible for controlling + * low-level USB code + */ +static void s3c_hsotg_phy_enable(struct dwc2_hsotg *hsotg) +{ + struct platform_device *pdev = to_platform_device(hsotg->dev); + + dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev); + + if (hsotg->uphy) + usb_phy_init(hsotg->uphy); + else if (hsotg->plat && hsotg->plat->phy_init) + hsotg->plat->phy_init(pdev, hsotg->plat->phy_type); + else { + phy_init(hsotg->phy); + phy_power_on(hsotg->phy); + } +} + +/** + * s3c_hsotg_phy_disable - disable platform phy dev + * @hsotg: The driver state + * + * A wrapper for platform code responsible for controlling + * low-level USB code + */ +static void s3c_hsotg_phy_disable(struct dwc2_hsotg *hsotg) +{ + struct platform_device *pdev = to_platform_device(hsotg->dev); + + if (hsotg->uphy) + usb_phy_shutdown(hsotg->uphy); + else if (hsotg->plat && hsotg->plat->phy_exit) + hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type); + else { + phy_power_off(hsotg->phy); + phy_exit(hsotg->phy); + } +} + +/** + * s3c_hsotg_init - initalize the usb core + * @hsotg: The driver state + */ +static void s3c_hsotg_init(struct dwc2_hsotg *hsotg) +{ + u32 trdtim; + /* unmask subset of endpoint interrupts */ + + writel(DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK | + DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK, + hsotg->regs + DIEPMSK); + + writel(DOEPMSK_SETUPMSK | DOEPMSK_AHBERRMSK | + DOEPMSK_EPDISBLDMSK | DOEPMSK_XFERCOMPLMSK, + hsotg->regs + DOEPMSK); + + writel(0, hsotg->regs + DAINTMSK); + + /* Be in disconnected state until gadget is registered */ + __orr32(hsotg->regs + DCTL, DCTL_SFTDISCON); + + /* setup fifos */ + + dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", + readl(hsotg->regs + GRXFSIZ), + readl(hsotg->regs + GNPTXFSIZ)); + + s3c_hsotg_init_fifo(hsotg); + + /* set the PLL on, remove the HNP/SRP and set the PHY */ + trdtim = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5; + writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) | + (trdtim << GUSBCFG_USBTRDTIM_SHIFT), + hsotg->regs + GUSBCFG); + + if (using_dma(hsotg)) + __orr32(hsotg->regs + GAHBCFG, GAHBCFG_DMA_EN); +} + +/** + * s3c_hsotg_udc_start - prepare the udc for work + * @gadget: The usb gadget state + * @driver: The usb gadget driver + * + * Perform initialization to prepare udc device and driver + * to work. + */ +static int s3c_hsotg_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct dwc2_hsotg *hsotg = to_hsotg(gadget); + unsigned long flags; + int ret; + + if (!hsotg) { + pr_err("%s: called with no device\n", __func__); + return -ENODEV; + } + + if (!driver) { + dev_err(hsotg->dev, "%s: no driver\n", __func__); + return -EINVAL; + } + + if (driver->max_speed < USB_SPEED_FULL) + dev_err(hsotg->dev, "%s: bad speed\n", __func__); + + if (!driver->setup) { + dev_err(hsotg->dev, "%s: missing entry points\n", __func__); + return -EINVAL; + } + + mutex_lock(&hsotg->init_mutex); + WARN_ON(hsotg->driver); + + driver->driver.bus = NULL; + hsotg->driver = driver; + hsotg->gadget.dev.of_node = hsotg->dev->of_node; + hsotg->gadget.speed = USB_SPEED_UNKNOWN; + + clk_enable(hsotg->clk); + + ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + if (ret) { + dev_err(hsotg->dev, "failed to enable supplies: %d\n", ret); + goto err; + } + + s3c_hsotg_phy_enable(hsotg); + if (!IS_ERR_OR_NULL(hsotg->uphy)) + otg_set_peripheral(hsotg->uphy->otg, &hsotg->gadget); + + spin_lock_irqsave(&hsotg->lock, flags); + s3c_hsotg_init(hsotg); + s3c_hsotg_core_init_disconnected(hsotg, false); + hsotg->enabled = 0; + spin_unlock_irqrestore(&hsotg->lock, flags); + + dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name); + + mutex_unlock(&hsotg->init_mutex); + + return 0; + +err: + mutex_unlock(&hsotg->init_mutex); + hsotg->driver = NULL; + return ret; +} + +/** + * s3c_hsotg_udc_stop - stop the udc + * @gadget: The usb gadget state + * @driver: The usb gadget driver + * + * Stop udc hw block and stay tunned for future transmissions + */ +static int s3c_hsotg_udc_stop(struct usb_gadget *gadget) +{ + struct dwc2_hsotg *hsotg = to_hsotg(gadget); + unsigned long flags = 0; + int ep; + + if (!hsotg) + return -ENODEV; + + mutex_lock(&hsotg->init_mutex); + + /* all endpoints should be shutdown */ + for (ep = 1; ep < hsotg->num_of_eps; ep++) { + if (hsotg->eps_in[ep]) + s3c_hsotg_ep_disable(&hsotg->eps_in[ep]->ep); + if (hsotg->eps_out[ep]) + s3c_hsotg_ep_disable(&hsotg->eps_out[ep]->ep); + } + + spin_lock_irqsave(&hsotg->lock, flags); + + hsotg->driver = NULL; + hsotg->gadget.speed = USB_SPEED_UNKNOWN; + hsotg->enabled = 0; + + spin_unlock_irqrestore(&hsotg->lock, flags); + + if (!IS_ERR_OR_NULL(hsotg->uphy)) + otg_set_peripheral(hsotg->uphy->otg, NULL); + s3c_hsotg_phy_disable(hsotg); + + regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies); + + clk_disable(hsotg->clk); + + mutex_unlock(&hsotg->init_mutex); + + return 0; +} + +/** + * s3c_hsotg_gadget_getframe - read the frame number + * @gadget: The usb gadget state + * + * Read the {micro} frame number + */ +static int s3c_hsotg_gadget_getframe(struct usb_gadget *gadget) +{ + return s3c_hsotg_read_frameno(to_hsotg(gadget)); +} + +/** + * s3c_hsotg_pullup - connect/disconnect the USB PHY + * @gadget: The usb gadget state + * @is_on: Current state of the USB PHY + * + * Connect/Disconnect the USB PHY pullup + */ +static int s3c_hsotg_pullup(struct usb_gadget *gadget, int is_on) +{ + struct dwc2_hsotg *hsotg = to_hsotg(gadget); + unsigned long flags = 0; + + dev_dbg(hsotg->dev, "%s: is_on: %d\n", __func__, is_on); + + mutex_lock(&hsotg->init_mutex); + spin_lock_irqsave(&hsotg->lock, flags); + if (is_on) { + clk_enable(hsotg->clk); + hsotg->enabled = 1; + s3c_hsotg_core_init_disconnected(hsotg, false); + s3c_hsotg_core_connect(hsotg); + } else { + s3c_hsotg_core_disconnect(hsotg); + s3c_hsotg_disconnect(hsotg); + hsotg->enabled = 0; + clk_disable(hsotg->clk); + } + + hsotg->gadget.speed = USB_SPEED_UNKNOWN; + spin_unlock_irqrestore(&hsotg->lock, flags); + mutex_unlock(&hsotg->init_mutex); + + return 0; +} + +static int s3c_hsotg_vbus_session(struct usb_gadget *gadget, int is_active) +{ + struct dwc2_hsotg *hsotg = to_hsotg(gadget); + unsigned long flags; + + dev_dbg(hsotg->dev, "%s: is_active: %d\n", __func__, is_active); + spin_lock_irqsave(&hsotg->lock, flags); + + if (is_active) { + /* Kill any ep0 requests as controller will be reinitialized */ + kill_all_requests(hsotg, hsotg->eps_out[0], -ECONNRESET); + s3c_hsotg_core_init_disconnected(hsotg, false); + if (hsotg->enabled) + s3c_hsotg_core_connect(hsotg); + } else { + s3c_hsotg_core_disconnect(hsotg); + s3c_hsotg_disconnect(hsotg); + } + + spin_unlock_irqrestore(&hsotg->lock, flags); + return 0; +} + +/** + * s3c_hsotg_vbus_draw - report bMaxPower field + * @gadget: The usb gadget state + * @mA: Amount of current + * + * Report how much power the device may consume to the phy. + */ +static int s3c_hsotg_vbus_draw(struct usb_gadget *gadget, unsigned mA) +{ + struct dwc2_hsotg *hsotg = to_hsotg(gadget); + + if (IS_ERR_OR_NULL(hsotg->uphy)) + return -ENOTSUPP; + return usb_phy_set_power(hsotg->uphy, mA); +} + +static const struct usb_gadget_ops s3c_hsotg_gadget_ops = { + .get_frame = s3c_hsotg_gadget_getframe, + .udc_start = s3c_hsotg_udc_start, + .udc_stop = s3c_hsotg_udc_stop, + .pullup = s3c_hsotg_pullup, + .vbus_session = s3c_hsotg_vbus_session, + .vbus_draw = s3c_hsotg_vbus_draw, +}; + +/** + * s3c_hsotg_initep - initialise a single endpoint + * @hsotg: The device state. + * @hs_ep: The endpoint to be initialised. + * @epnum: The endpoint number + * + * Initialise the given endpoint (as part of the probe and device state + * creation) to give to the gadget driver. Setup the endpoint name, any + * direction information and other state that may be required. + */ +static void s3c_hsotg_initep(struct dwc2_hsotg *hsotg, + struct s3c_hsotg_ep *hs_ep, + int epnum, + bool dir_in) +{ + char *dir; + + if (epnum == 0) + dir = ""; + else if (dir_in) + dir = "in"; + else + dir = "out"; + + hs_ep->dir_in = dir_in; + hs_ep->index = epnum; + + snprintf(hs_ep->name, sizeof(hs_ep->name), "ep%d%s", epnum, dir); + + INIT_LIST_HEAD(&hs_ep->queue); + INIT_LIST_HEAD(&hs_ep->ep.ep_list); + + /* add to the list of endpoints known by the gadget driver */ + if (epnum) + list_add_tail(&hs_ep->ep.ep_list, &hsotg->gadget.ep_list); + + hs_ep->parent = hsotg; + hs_ep->ep.name = hs_ep->name; + usb_ep_set_maxpacket_limit(&hs_ep->ep, epnum ? 1024 : EP0_MPS_LIMIT); + hs_ep->ep.ops = &s3c_hsotg_ep_ops; + + /* + * if we're using dma, we need to set the next-endpoint pointer + * to be something valid. + */ + + if (using_dma(hsotg)) { + u32 next = DXEPCTL_NEXTEP((epnum + 1) % 15); + if (dir_in) + writel(next, hsotg->regs + DIEPCTL(epnum)); + else + writel(next, hsotg->regs + DOEPCTL(epnum)); + } +} + +/** + * s3c_hsotg_hw_cfg - read HW configuration registers + * @param: The device state + * + * Read the USB core HW configuration registers + */ +static int s3c_hsotg_hw_cfg(struct dwc2_hsotg *hsotg) +{ + u32 cfg; + u32 ep_type; + u32 i; + + /* check hardware configuration */ + + cfg = readl(hsotg->regs + GHWCFG2); + hsotg->num_of_eps = (cfg >> GHWCFG2_NUM_DEV_EP_SHIFT) & 0xF; + /* Add ep0 */ + hsotg->num_of_eps++; + + hsotg->eps_in[0] = devm_kzalloc(hsotg->dev, sizeof(struct s3c_hsotg_ep), + GFP_KERNEL); + if (!hsotg->eps_in[0]) + return -ENOMEM; + /* Same s3c_hsotg_ep is used in both directions for ep0 */ + hsotg->eps_out[0] = hsotg->eps_in[0]; + + cfg = readl(hsotg->regs + GHWCFG1); + for (i = 1, cfg >>= 2; i < hsotg->num_of_eps; i++, cfg >>= 2) { + ep_type = cfg & 3; + /* Direction in or both */ + if (!(ep_type & 2)) { + hsotg->eps_in[i] = devm_kzalloc(hsotg->dev, + sizeof(struct s3c_hsotg_ep), GFP_KERNEL); + if (!hsotg->eps_in[i]) + return -ENOMEM; + } + /* Direction out or both */ + if (!(ep_type & 1)) { + hsotg->eps_out[i] = devm_kzalloc(hsotg->dev, + sizeof(struct s3c_hsotg_ep), GFP_KERNEL); + if (!hsotg->eps_out[i]) + return -ENOMEM; + } + } + + cfg = readl(hsotg->regs + GHWCFG3); + hsotg->fifo_mem = (cfg >> GHWCFG3_DFIFO_DEPTH_SHIFT); + + cfg = readl(hsotg->regs + GHWCFG4); + hsotg->dedicated_fifos = (cfg >> GHWCFG4_DED_FIFO_SHIFT) & 1; + + dev_info(hsotg->dev, "EPs: %d, %s fifos, %d entries in SPRAM\n", + hsotg->num_of_eps, + hsotg->dedicated_fifos ? "dedicated" : "shared", + hsotg->fifo_mem); + return 0; +} + +/** + * s3c_hsotg_dump - dump state of the udc + * @param: The device state + */ +static void s3c_hsotg_dump(struct dwc2_hsotg *hsotg) +{ +#ifdef DEBUG + struct device *dev = hsotg->dev; + void __iomem *regs = hsotg->regs; + u32 val; + int idx; + + dev_info(dev, "DCFG=0x%08x, DCTL=0x%08x, DIEPMSK=%08x\n", + readl(regs + DCFG), readl(regs + DCTL), + readl(regs + DIEPMSK)); + + dev_info(dev, "GAHBCFG=0x%08x, GHWCFG1=0x%08x\n", + readl(regs + GAHBCFG), readl(regs + GHWCFG1)); + + dev_info(dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", + readl(regs + GRXFSIZ), readl(regs + GNPTXFSIZ)); + + /* show periodic fifo settings */ + + for (idx = 1; idx < hsotg->num_of_eps; idx++) { + val = readl(regs + DPTXFSIZN(idx)); + dev_info(dev, "DPTx[%d] FSize=%d, StAddr=0x%08x\n", idx, + val >> FIFOSIZE_DEPTH_SHIFT, + val & FIFOSIZE_STARTADDR_MASK); + } + + for (idx = 0; idx < hsotg->num_of_eps; idx++) { + dev_info(dev, + "ep%d-in: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", idx, + readl(regs + DIEPCTL(idx)), + readl(regs + DIEPTSIZ(idx)), + readl(regs + DIEPDMA(idx))); + + val = readl(regs + DOEPCTL(idx)); + dev_info(dev, + "ep%d-out: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", + idx, readl(regs + DOEPCTL(idx)), + readl(regs + DOEPTSIZ(idx)), + readl(regs + DOEPDMA(idx))); + + } + + dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n", + readl(regs + DVBUSDIS), readl(regs + DVBUSPULSE)); +#endif +} + +/** + * testmode_write - debugfs: change usb test mode + * @seq: The seq file to write to. + * @v: Unused parameter. + * + * This debugfs entry modify the current usb test mode. + */ +static ssize_t testmode_write(struct file *file, const char __user *ubuf, size_t + count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct dwc2_hsotg *hsotg = s->private; + unsigned long flags; + u32 testmode = 0; + char buf[32]; + + if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) + return -EFAULT; + + if (!strncmp(buf, "test_j", 6)) + testmode = TEST_J; + else if (!strncmp(buf, "test_k", 6)) + testmode = TEST_K; + else if (!strncmp(buf, "test_se0_nak", 12)) + testmode = TEST_SE0_NAK; + else if (!strncmp(buf, "test_packet", 11)) + testmode = TEST_PACKET; + else if (!strncmp(buf, "test_force_enable", 17)) + testmode = TEST_FORCE_EN; + else + testmode = 0; + + spin_lock_irqsave(&hsotg->lock, flags); + s3c_hsotg_set_test_mode(hsotg, testmode); + spin_unlock_irqrestore(&hsotg->lock, flags); + return count; +} + +/** + * testmode_show - debugfs: show usb test mode state + * @seq: The seq file to write to. + * @v: Unused parameter. + * + * This debugfs entry shows which usb test mode is currently enabled. + */ +static int testmode_show(struct seq_file *s, void *unused) +{ + struct dwc2_hsotg *hsotg = s->private; + unsigned long flags; + int dctl; + + spin_lock_irqsave(&hsotg->lock, flags); + dctl = readl(hsotg->regs + DCTL); + dctl &= DCTL_TSTCTL_MASK; + dctl >>= DCTL_TSTCTL_SHIFT; + spin_unlock_irqrestore(&hsotg->lock, flags); + + switch (dctl) { + case 0: + seq_puts(s, "no test\n"); + break; + case TEST_J: + seq_puts(s, "test_j\n"); + break; + case TEST_K: + seq_puts(s, "test_k\n"); + break; + case TEST_SE0_NAK: + seq_puts(s, "test_se0_nak\n"); + break; + case TEST_PACKET: + seq_puts(s, "test_packet\n"); + break; + case TEST_FORCE_EN: + seq_puts(s, "test_force_enable\n"); + break; + default: + seq_printf(s, "UNKNOWN %d\n", dctl); + } + + return 0; +} + +static int testmode_open(struct inode *inode, struct file *file) +{ + return single_open(file, testmode_show, inode->i_private); +} + +static const struct file_operations testmode_fops = { + .owner = THIS_MODULE, + .open = testmode_open, + .write = testmode_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/** + * state_show - debugfs: show overall driver and device state. + * @seq: The seq file to write to. + * @v: Unused parameter. + * + * This debugfs entry shows the overall state of the hardware and + * some general information about each of the endpoints available + * to the system. + */ +static int state_show(struct seq_file *seq, void *v) +{ + struct dwc2_hsotg *hsotg = seq->private; + void __iomem *regs = hsotg->regs; + int idx; + + seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n", + readl(regs + DCFG), + readl(regs + DCTL), + readl(regs + DSTS)); + + seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n", + readl(regs + DIEPMSK), readl(regs + DOEPMSK)); + + seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n", + readl(regs + GINTMSK), + readl(regs + GINTSTS)); + + seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n", + readl(regs + DAINTMSK), + readl(regs + DAINT)); + + seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n", + readl(regs + GNPTXSTS), + readl(regs + GRXSTSR)); + + seq_puts(seq, "\nEndpoint status:\n"); + + for (idx = 0; idx < hsotg->num_of_eps; idx++) { + u32 in, out; + + in = readl(regs + DIEPCTL(idx)); + out = readl(regs + DOEPCTL(idx)); + + seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x", + idx, in, out); + + in = readl(regs + DIEPTSIZ(idx)); + out = readl(regs + DOEPTSIZ(idx)); + + seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x", + in, out); + + seq_puts(seq, "\n"); + } + + return 0; +} + +static int state_open(struct inode *inode, struct file *file) +{ + return single_open(file, state_show, inode->i_private); +} + +static const struct file_operations state_fops = { + .owner = THIS_MODULE, + .open = state_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/** + * fifo_show - debugfs: show the fifo information + * @seq: The seq_file to write data to. + * @v: Unused parameter. + * + * Show the FIFO information for the overall fifo and all the + * periodic transmission FIFOs. + */ +static int fifo_show(struct seq_file *seq, void *v) +{ + struct dwc2_hsotg *hsotg = seq->private; + void __iomem *regs = hsotg->regs; + u32 val; + int idx; + + seq_puts(seq, "Non-periodic FIFOs:\n"); + seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ)); + + val = readl(regs + GNPTXFSIZ); + seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n", + val >> FIFOSIZE_DEPTH_SHIFT, + val & FIFOSIZE_DEPTH_MASK); + + seq_puts(seq, "\nPeriodic TXFIFOs:\n"); + + for (idx = 1; idx < hsotg->num_of_eps; idx++) { + val = readl(regs + DPTXFSIZN(idx)); + + seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx, + val >> FIFOSIZE_DEPTH_SHIFT, + val & FIFOSIZE_STARTADDR_MASK); + } + + return 0; +} + +static int fifo_open(struct inode *inode, struct file *file) +{ + return single_open(file, fifo_show, inode->i_private); +} + +static const struct file_operations fifo_fops = { + .owner = THIS_MODULE, + .open = fifo_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + + +static const char *decode_direction(int is_in) +{ + return is_in ? "in" : "out"; +} + +/** + * ep_show - debugfs: show the state of an endpoint. + * @seq: The seq_file to write data to. + * @v: Unused parameter. + * + * This debugfs entry shows the state of the given endpoint (one is + * registered for each available). + */ +static int ep_show(struct seq_file *seq, void *v) +{ + struct s3c_hsotg_ep *ep = seq->private; + struct dwc2_hsotg *hsotg = ep->parent; + struct s3c_hsotg_req *req; + void __iomem *regs = hsotg->regs; + int index = ep->index; + int show_limit = 15; + unsigned long flags; + + seq_printf(seq, "Endpoint index %d, named %s, dir %s:\n", + ep->index, ep->ep.name, decode_direction(ep->dir_in)); + + /* first show the register state */ + + seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n", + readl(regs + DIEPCTL(index)), + readl(regs + DOEPCTL(index))); + + seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n", + readl(regs + DIEPDMA(index)), + readl(regs + DOEPDMA(index))); + + seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n", + readl(regs + DIEPINT(index)), + readl(regs + DOEPINT(index))); + + seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n", + readl(regs + DIEPTSIZ(index)), + readl(regs + DOEPTSIZ(index))); + + seq_puts(seq, "\n"); + seq_printf(seq, "mps %d\n", ep->ep.maxpacket); + seq_printf(seq, "total_data=%ld\n", ep->total_data); + + seq_printf(seq, "request list (%p,%p):\n", + ep->queue.next, ep->queue.prev); + + spin_lock_irqsave(&hsotg->lock, flags); + + list_for_each_entry(req, &ep->queue, queue) { + if (--show_limit < 0) { + seq_puts(seq, "not showing more requests...\n"); + break; + } + + seq_printf(seq, "%c req %p: %d bytes @%p, ", + req == ep->req ? '*' : ' ', + req, req->req.length, req->req.buf); + seq_printf(seq, "%d done, res %d\n", + req->req.actual, req->req.status); + } + + spin_unlock_irqrestore(&hsotg->lock, flags); + + return 0; +} + +static int ep_open(struct inode *inode, struct file *file) +{ + return single_open(file, ep_show, inode->i_private); +} + +static const struct file_operations ep_fops = { + .owner = THIS_MODULE, + .open = ep_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/** + * s3c_hsotg_create_debug - create debugfs directory and files + * @hsotg: The driver state + * + * Create the debugfs files to allow the user to get information + * about the state of the system. The directory name is created + * with the same name as the device itself, in case we end up + * with multiple blocks in future systems. + */ +static void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg) +{ + struct dentry *root; + unsigned epidx; + + root = debugfs_create_dir(dev_name(hsotg->dev), NULL); + hsotg->debug_root = root; + if (IS_ERR(root)) { + dev_err(hsotg->dev, "cannot create debug root\n"); + return; + } + + /* create general state file */ + + hsotg->debug_file = debugfs_create_file("state", S_IRUGO, root, + hsotg, &state_fops); + + if (IS_ERR(hsotg->debug_file)) + dev_err(hsotg->dev, "%s: failed to create state\n", __func__); + + hsotg->debug_testmode = debugfs_create_file("testmode", + S_IRUGO | S_IWUSR, root, + hsotg, &testmode_fops); + + if (IS_ERR(hsotg->debug_testmode)) + dev_err(hsotg->dev, "%s: failed to create testmode\n", + __func__); + + hsotg->debug_fifo = debugfs_create_file("fifo", S_IRUGO, root, + hsotg, &fifo_fops); + + if (IS_ERR(hsotg->debug_fifo)) + dev_err(hsotg->dev, "%s: failed to create fifo\n", __func__); + + /* Create one file for each out endpoint */ + for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) { + struct s3c_hsotg_ep *ep; + + ep = hsotg->eps_out[epidx]; + if (ep) { + ep->debugfs = debugfs_create_file(ep->name, S_IRUGO, + root, ep, &ep_fops); + + if (IS_ERR(ep->debugfs)) + dev_err(hsotg->dev, "failed to create %s debug file\n", + ep->name); + } + } + /* Create one file for each in endpoint. EP0 is handled with out eps */ + for (epidx = 1; epidx < hsotg->num_of_eps; epidx++) { + struct s3c_hsotg_ep *ep; + + ep = hsotg->eps_in[epidx]; + if (ep) { + ep->debugfs = debugfs_create_file(ep->name, S_IRUGO, + root, ep, &ep_fops); + + if (IS_ERR(ep->debugfs)) + dev_err(hsotg->dev, "failed to create %s debug file\n", + ep->name); + } + } +} + +/** + * s3c_hsotg_delete_debug - cleanup debugfs entries + * @hsotg: The driver state + * + * Cleanup (remove) the debugfs files for use on module exit. + */ +static void s3c_hsotg_delete_debug(struct dwc2_hsotg *hsotg) +{ + unsigned epidx; + + for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) { + if (hsotg->eps_in[epidx]) + debugfs_remove(hsotg->eps_in[epidx]->debugfs); + if (hsotg->eps_out[epidx]) + debugfs_remove(hsotg->eps_out[epidx]->debugfs); + } + + debugfs_remove(hsotg->debug_file); + debugfs_remove(hsotg->debug_testmode); + debugfs_remove(hsotg->debug_fifo); + debugfs_remove(hsotg->debug_root); +} + +#ifdef CONFIG_OF +static void s3c_hsotg_of_probe(struct dwc2_hsotg *hsotg) +{ + struct device_node *np = hsotg->dev->of_node; + u32 len = 0; + u32 i = 0; + + /* Enable dma if requested in device tree */ + hsotg->g_using_dma = of_property_read_bool(np, "g-use-dma"); + + /* + * Register TX periodic fifo size per endpoint. + * EP0 is excluded since it has no fifo configuration. + */ + if (!of_find_property(np, "g-tx-fifo-size", &len)) + goto rx_fifo; + + len /= sizeof(u32); + + /* Read tx fifo sizes other than ep0 */ + if (of_property_read_u32_array(np, "g-tx-fifo-size", + &hsotg->g_tx_fifo_sz[1], len)) + goto rx_fifo; + + /* Add ep0 */ + len++; + + /* Make remaining TX fifos unavailable */ + if (len < MAX_EPS_CHANNELS) { + for (i = len; i < MAX_EPS_CHANNELS; i++) + hsotg->g_tx_fifo_sz[i] = 0; + } + +rx_fifo: + /* Register RX fifo size */ + of_property_read_u32(np, "g-rx-fifo-size", &hsotg->g_rx_fifo_sz); + + /* Register NPTX fifo size */ + of_property_read_u32(np, "g-np-tx-fifo-size", + &hsotg->g_np_g_tx_fifo_sz); +} +#else +static inline void s3c_hsotg_of_probe(struct dwc2_hsotg *hsotg) { } +#endif + +/** + * dwc2_gadget_init - init function for gadget + * @dwc2: The data structure for the DWC2 driver. + * @irq: The IRQ number for the controller. + */ +int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq) +{ + struct device *dev = hsotg->dev; + struct s3c_hsotg_plat *plat = dev->platform_data; + int epnum; + int ret; + int i; + u32 p_tx_fifo[] = DWC2_G_P_LEGACY_TX_FIFO_SIZE; + + /* Set default UTMI width */ + hsotg->phyif = GUSBCFG_PHYIF16; + + s3c_hsotg_of_probe(hsotg); + + /* Initialize to legacy fifo configuration values */ + hsotg->g_rx_fifo_sz = 2048; + hsotg->g_np_g_tx_fifo_sz = 1024; + memcpy(&hsotg->g_tx_fifo_sz[1], p_tx_fifo, sizeof(p_tx_fifo)); + /* Device tree specific probe */ + s3c_hsotg_of_probe(hsotg); + /* Dump fifo information */ + dev_dbg(dev, "NonPeriodic TXFIFO size: %d\n", + hsotg->g_np_g_tx_fifo_sz); + dev_dbg(dev, "RXFIFO size: %d\n", hsotg->g_rx_fifo_sz); + for (i = 0; i < MAX_EPS_CHANNELS; i++) + dev_dbg(dev, "Periodic TXFIFO%2d size: %d\n", i, + hsotg->g_tx_fifo_sz[i]); + /* + * If platform probe couldn't find a generic PHY or an old style + * USB PHY, fall back to pdata + */ + if (IS_ERR_OR_NULL(hsotg->phy) && IS_ERR_OR_NULL(hsotg->uphy)) { + plat = dev_get_platdata(dev); + if (!plat) { + dev_err(dev, + "no platform data or transceiver defined\n"); + return -EPROBE_DEFER; + } + hsotg->plat = plat; + } else if (hsotg->phy) { + /* + * If using the generic PHY framework, check if the PHY bus + * width is 8-bit and set the phyif appropriately. + */ + if (phy_get_bus_width(hsotg->phy) == 8) + hsotg->phyif = GUSBCFG_PHYIF8; + } + + hsotg->clk = devm_clk_get(dev, "otg"); + if (IS_ERR(hsotg->clk)) { + hsotg->clk = NULL; + dev_dbg(dev, "cannot get otg clock\n"); + } + + hsotg->gadget.max_speed = USB_SPEED_HIGH; + hsotg->gadget.ops = &s3c_hsotg_gadget_ops; + hsotg->gadget.name = dev_name(dev); + + /* reset the system */ + + ret = clk_prepare_enable(hsotg->clk); + if (ret) { + dev_err(dev, "failed to enable otg clk\n"); + goto err_clk; + } + + + /* regulators */ + + for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++) + hsotg->supplies[i].supply = s3c_hsotg_supply_names[i]; + + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + if (ret) { + dev_err(dev, "failed to request supplies: %d\n", ret); + goto err_clk; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + + if (ret) { + dev_err(dev, "failed to enable supplies: %d\n", ret); + goto err_clk; + } + + /* usb phy enable */ + s3c_hsotg_phy_enable(hsotg); + + /* + * Force Device mode before initialization. + * This allows correctly configuring fifo for device mode. + */ + __bic32(hsotg->regs + GUSBCFG, GUSBCFG_FORCEHOSTMODE); + __orr32(hsotg->regs + GUSBCFG, GUSBCFG_FORCEDEVMODE); + + /* + * According to Synopsys databook, this sleep is needed for the force + * device mode to take effect. + */ + msleep(25); + + s3c_hsotg_corereset(hsotg); + ret = s3c_hsotg_hw_cfg(hsotg); + if (ret) { + dev_err(hsotg->dev, "Hardware configuration failed: %d\n", ret); + goto err_clk; + } + + s3c_hsotg_init(hsotg); + + /* Switch back to default configuration */ + __bic32(hsotg->regs + GUSBCFG, GUSBCFG_FORCEDEVMODE); + + hsotg->ctrl_buff = devm_kzalloc(hsotg->dev, + DWC2_CTRL_BUFF_SIZE, GFP_KERNEL); + if (!hsotg->ctrl_buff) { + dev_err(dev, "failed to allocate ctrl request buff\n"); + ret = -ENOMEM; + goto err_supplies; + } + + hsotg->ep0_buff = devm_kzalloc(hsotg->dev, + DWC2_CTRL_BUFF_SIZE, GFP_KERNEL); + if (!hsotg->ep0_buff) { + dev_err(dev, "failed to allocate ctrl reply buff\n"); + ret = -ENOMEM; + goto err_supplies; + } + + ret = devm_request_irq(hsotg->dev, irq, s3c_hsotg_irq, IRQF_SHARED, + dev_name(hsotg->dev), hsotg); + if (ret < 0) { + s3c_hsotg_phy_disable(hsotg); + clk_disable_unprepare(hsotg->clk); + regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + dev_err(dev, "cannot claim IRQ for gadget\n"); + goto err_supplies; + } + + /* hsotg->num_of_eps holds number of EPs other than ep0 */ + + if (hsotg->num_of_eps == 0) { + dev_err(dev, "wrong number of EPs (zero)\n"); + ret = -EINVAL; + goto err_supplies; + } + + /* setup endpoint information */ + + INIT_LIST_HEAD(&hsotg->gadget.ep_list); + hsotg->gadget.ep0 = &hsotg->eps_out[0]->ep; + + /* allocate EP0 request */ + + hsotg->ctrl_req = s3c_hsotg_ep_alloc_request(&hsotg->eps_out[0]->ep, + GFP_KERNEL); + if (!hsotg->ctrl_req) { + dev_err(dev, "failed to allocate ctrl req\n"); + ret = -ENOMEM; + goto err_supplies; + } + + /* initialise the endpoints now the core has been initialised */ + for (epnum = 0; epnum < hsotg->num_of_eps; epnum++) { + if (hsotg->eps_in[epnum]) + s3c_hsotg_initep(hsotg, hsotg->eps_in[epnum], + epnum, 1); + if (hsotg->eps_out[epnum]) + s3c_hsotg_initep(hsotg, hsotg->eps_out[epnum], + epnum, 0); + } + + /* disable power and clock */ + s3c_hsotg_phy_disable(hsotg); + + ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + if (ret) { + dev_err(dev, "failed to disable supplies: %d\n", ret); + goto err_supplies; + } + + ret = usb_add_gadget_udc(dev, &hsotg->gadget); + if (ret) + goto err_supplies; + + s3c_hsotg_create_debug(hsotg); + + s3c_hsotg_dump(hsotg); + + return 0; + +err_supplies: + s3c_hsotg_phy_disable(hsotg); +err_clk: + clk_disable_unprepare(hsotg->clk); + + return ret; +} +EXPORT_SYMBOL_GPL(dwc2_gadget_init); + +/** + * s3c_hsotg_remove - remove function for hsotg driver + * @pdev: The platform information for the driver + */ +int s3c_hsotg_remove(struct dwc2_hsotg *hsotg) +{ + usb_del_gadget_udc(&hsotg->gadget); + s3c_hsotg_delete_debug(hsotg); + clk_disable_unprepare(hsotg->clk); + + return 0; +} +EXPORT_SYMBOL_GPL(s3c_hsotg_remove); + +int s3c_hsotg_suspend(struct dwc2_hsotg *hsotg) +{ + unsigned long flags; + int ret = 0; + + mutex_lock(&hsotg->init_mutex); + + if (hsotg->driver) { + int ep; + + dev_info(hsotg->dev, "suspending usb gadget %s\n", + hsotg->driver->driver.name); + + spin_lock_irqsave(&hsotg->lock, flags); + if (hsotg->enabled) + s3c_hsotg_core_disconnect(hsotg); + s3c_hsotg_disconnect(hsotg); + hsotg->gadget.speed = USB_SPEED_UNKNOWN; + spin_unlock_irqrestore(&hsotg->lock, flags); + + s3c_hsotg_phy_disable(hsotg); + + for (ep = 0; ep < hsotg->num_of_eps; ep++) { + if (hsotg->eps_in[ep]) + s3c_hsotg_ep_disable(&hsotg->eps_in[ep]->ep); + if (hsotg->eps_out[ep]) + s3c_hsotg_ep_disable(&hsotg->eps_out[ep]->ep); + } + + ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + clk_disable(hsotg->clk); + } + + mutex_unlock(&hsotg->init_mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(s3c_hsotg_suspend); + +int s3c_hsotg_resume(struct dwc2_hsotg *hsotg) +{ + unsigned long flags; + int ret = 0; + + mutex_lock(&hsotg->init_mutex); + + if (hsotg->driver) { + dev_info(hsotg->dev, "resuming usb gadget %s\n", + hsotg->driver->driver.name); + + clk_enable(hsotg->clk); + ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + + s3c_hsotg_phy_enable(hsotg); + + spin_lock_irqsave(&hsotg->lock, flags); + s3c_hsotg_core_init_disconnected(hsotg, false); + if (hsotg->enabled) + s3c_hsotg_core_connect(hsotg); + spin_unlock_irqrestore(&hsotg->lock, flags); + } + mutex_unlock(&hsotg->init_mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(s3c_hsotg_resume); diff --git a/kernel/drivers/usb/dwc2/hcd.c b/kernel/drivers/usb/dwc2/hcd.c new file mode 100644 index 000000000..fbbbac215 --- /dev/null +++ b/kernel/drivers/usb/dwc2/hcd.c @@ -0,0 +1,3013 @@ +/* + * hcd.c - DesignWare HS OTG Controller host-mode routines + * + * Copyright (C) 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * This file contains the core HCD code, and implements the Linux hc_driver + * API + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/usb.h> + +#include <linux/usb/hcd.h> +#include <linux/usb/ch11.h> + +#include "core.h" +#include "hcd.h" + +/** + * dwc2_dump_channel_info() - Prints the state of a host channel + * + * @hsotg: Programming view of DWC_otg controller + * @chan: Pointer to the channel to dump + * + * Must be called with interrupt disabled and spinlock held + * + * NOTE: This function will be removed once the peripheral controller code + * is integrated and the driver is stable + */ +static void dwc2_dump_channel_info(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan) +{ +#ifdef VERBOSE_DEBUG + int num_channels = hsotg->core_params->host_channels; + struct dwc2_qh *qh; + u32 hcchar; + u32 hcsplt; + u32 hctsiz; + u32 hc_dma; + int i; + + if (chan == NULL) + return; + + hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); + hcsplt = readl(hsotg->regs + HCSPLT(chan->hc_num)); + hctsiz = readl(hsotg->regs + HCTSIZ(chan->hc_num)); + hc_dma = readl(hsotg->regs + HCDMA(chan->hc_num)); + + dev_dbg(hsotg->dev, " Assigned to channel %p:\n", chan); + dev_dbg(hsotg->dev, " hcchar 0x%08x, hcsplt 0x%08x\n", + hcchar, hcsplt); + dev_dbg(hsotg->dev, " hctsiz 0x%08x, hc_dma 0x%08x\n", + hctsiz, hc_dma); + dev_dbg(hsotg->dev, " dev_addr: %d, ep_num: %d, ep_is_in: %d\n", + chan->dev_addr, chan->ep_num, chan->ep_is_in); + dev_dbg(hsotg->dev, " ep_type: %d\n", chan->ep_type); + dev_dbg(hsotg->dev, " max_packet: %d\n", chan->max_packet); + dev_dbg(hsotg->dev, " data_pid_start: %d\n", chan->data_pid_start); + dev_dbg(hsotg->dev, " xfer_started: %d\n", chan->xfer_started); + dev_dbg(hsotg->dev, " halt_status: %d\n", chan->halt_status); + dev_dbg(hsotg->dev, " xfer_buf: %p\n", chan->xfer_buf); + dev_dbg(hsotg->dev, " xfer_dma: %08lx\n", + (unsigned long)chan->xfer_dma); + dev_dbg(hsotg->dev, " xfer_len: %d\n", chan->xfer_len); + dev_dbg(hsotg->dev, " qh: %p\n", chan->qh); + dev_dbg(hsotg->dev, " NP inactive sched:\n"); + list_for_each_entry(qh, &hsotg->non_periodic_sched_inactive, + qh_list_entry) + dev_dbg(hsotg->dev, " %p\n", qh); + dev_dbg(hsotg->dev, " NP active sched:\n"); + list_for_each_entry(qh, &hsotg->non_periodic_sched_active, + qh_list_entry) + dev_dbg(hsotg->dev, " %p\n", qh); + dev_dbg(hsotg->dev, " Channels:\n"); + for (i = 0; i < num_channels; i++) { + struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i]; + + dev_dbg(hsotg->dev, " %2d: %p\n", i, chan); + } +#endif /* VERBOSE_DEBUG */ +} + +/* + * Processes all the URBs in a single list of QHs. Completes them with + * -ETIMEDOUT and frees the QTD. + * + * Must be called with interrupt disabled and spinlock held + */ +static void dwc2_kill_urbs_in_qh_list(struct dwc2_hsotg *hsotg, + struct list_head *qh_list) +{ + struct dwc2_qh *qh, *qh_tmp; + struct dwc2_qtd *qtd, *qtd_tmp; + + list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) { + list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, + qtd_list_entry) { + dwc2_host_complete(hsotg, qtd, -ETIMEDOUT); + dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); + } + } +} + +static void dwc2_qh_list_free(struct dwc2_hsotg *hsotg, + struct list_head *qh_list) +{ + struct dwc2_qtd *qtd, *qtd_tmp; + struct dwc2_qh *qh, *qh_tmp; + unsigned long flags; + + if (!qh_list->next) + /* The list hasn't been initialized yet */ + return; + + spin_lock_irqsave(&hsotg->lock, flags); + + /* Ensure there are no QTDs or URBs left */ + dwc2_kill_urbs_in_qh_list(hsotg, qh_list); + + list_for_each_entry_safe(qh, qh_tmp, qh_list, qh_list_entry) { + dwc2_hcd_qh_unlink(hsotg, qh); + + /* Free each QTD in the QH's QTD list */ + list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, + qtd_list_entry) + dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); + + spin_unlock_irqrestore(&hsotg->lock, flags); + dwc2_hcd_qh_free(hsotg, qh); + spin_lock_irqsave(&hsotg->lock, flags); + } + + spin_unlock_irqrestore(&hsotg->lock, flags); +} + +/* + * Responds with an error status of -ETIMEDOUT to all URBs in the non-periodic + * and periodic schedules. The QTD associated with each URB is removed from + * the schedule and freed. This function may be called when a disconnect is + * detected or when the HCD is being stopped. + * + * Must be called with interrupt disabled and spinlock held + */ +static void dwc2_kill_all_urbs(struct dwc2_hsotg *hsotg) +{ + dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_inactive); + dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->non_periodic_sched_active); + dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_inactive); + dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_ready); + dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_assigned); + dwc2_kill_urbs_in_qh_list(hsotg, &hsotg->periodic_sched_queued); +} + +/** + * dwc2_hcd_start() - Starts the HCD when switching to Host mode + * + * @hsotg: Pointer to struct dwc2_hsotg + */ +void dwc2_hcd_start(struct dwc2_hsotg *hsotg) +{ + u32 hprt0; + + if (hsotg->op_state == OTG_STATE_B_HOST) { + /* + * Reset the port. During a HNP mode switch the reset + * needs to occur within 1ms and have a duration of at + * least 50ms. + */ + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_RST; + writel(hprt0, hsotg->regs + HPRT0); + } + + queue_delayed_work(hsotg->wq_otg, &hsotg->start_work, + msecs_to_jiffies(50)); +} + +/* Must be called with interrupt disabled and spinlock held */ +static void dwc2_hcd_cleanup_channels(struct dwc2_hsotg *hsotg) +{ + int num_channels = hsotg->core_params->host_channels; + struct dwc2_host_chan *channel; + u32 hcchar; + int i; + + if (hsotg->core_params->dma_enable <= 0) { + /* Flush out any channel requests in slave mode */ + for (i = 0; i < num_channels; i++) { + channel = hsotg->hc_ptr_array[i]; + if (!list_empty(&channel->hc_list_entry)) + continue; + hcchar = readl(hsotg->regs + HCCHAR(i)); + if (hcchar & HCCHAR_CHENA) { + hcchar &= ~(HCCHAR_CHENA | HCCHAR_EPDIR); + hcchar |= HCCHAR_CHDIS; + writel(hcchar, hsotg->regs + HCCHAR(i)); + } + } + } + + for (i = 0; i < num_channels; i++) { + channel = hsotg->hc_ptr_array[i]; + if (!list_empty(&channel->hc_list_entry)) + continue; + hcchar = readl(hsotg->regs + HCCHAR(i)); + if (hcchar & HCCHAR_CHENA) { + /* Halt the channel */ + hcchar |= HCCHAR_CHDIS; + writel(hcchar, hsotg->regs + HCCHAR(i)); + } + + dwc2_hc_cleanup(hsotg, channel); + list_add_tail(&channel->hc_list_entry, &hsotg->free_hc_list); + /* + * Added for Descriptor DMA to prevent channel double cleanup in + * release_channel_ddma(), which is called from ep_disable when + * device disconnects + */ + channel->qh = NULL; + } + /* All channels have been freed, mark them available */ + if (hsotg->core_params->uframe_sched > 0) { + hsotg->available_host_channels = + hsotg->core_params->host_channels; + } else { + hsotg->non_periodic_channels = 0; + hsotg->periodic_channels = 0; + } +} + +/** + * dwc2_hcd_disconnect() - Handles disconnect of the HCD + * + * @hsotg: Pointer to struct dwc2_hsotg + * + * Must be called with interrupt disabled and spinlock held + */ +void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg) +{ + u32 intr; + + /* Set status flags for the hub driver */ + hsotg->flags.b.port_connect_status_change = 1; + hsotg->flags.b.port_connect_status = 0; + + /* + * Shutdown any transfers in process by clearing the Tx FIFO Empty + * interrupt mask and status bits and disabling subsequent host + * channel interrupts. + */ + intr = readl(hsotg->regs + GINTMSK); + intr &= ~(GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT); + writel(intr, hsotg->regs + GINTMSK); + intr = GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT; + writel(intr, hsotg->regs + GINTSTS); + + /* + * Turn off the vbus power only if the core has transitioned to device + * mode. If still in host mode, need to keep power on to detect a + * reconnection. + */ + if (dwc2_is_device_mode(hsotg)) { + if (hsotg->op_state != OTG_STATE_A_SUSPEND) { + dev_dbg(hsotg->dev, "Disconnect: PortPower off\n"); + writel(0, hsotg->regs + HPRT0); + } + + dwc2_disable_host_interrupts(hsotg); + } + + /* Respond with an error status to all URBs in the schedule */ + dwc2_kill_all_urbs(hsotg); + + if (dwc2_is_host_mode(hsotg)) + /* Clean up any host channels that were in use */ + dwc2_hcd_cleanup_channels(hsotg); + + dwc2_host_disconnect(hsotg); +} + +/** + * dwc2_hcd_rem_wakeup() - Handles Remote Wakeup + * + * @hsotg: Pointer to struct dwc2_hsotg + */ +static void dwc2_hcd_rem_wakeup(struct dwc2_hsotg *hsotg) +{ + if (hsotg->lx_state == DWC2_L2) { + hsotg->flags.b.port_suspend_change = 1; + usb_hcd_resume_root_hub(hsotg->priv); + } else { + hsotg->flags.b.port_l1_change = 1; + } +} + +/** + * dwc2_hcd_stop() - Halts the DWC_otg host mode operations in a clean manner + * + * @hsotg: Pointer to struct dwc2_hsotg + * + * Must be called with interrupt disabled and spinlock held + */ +void dwc2_hcd_stop(struct dwc2_hsotg *hsotg) +{ + dev_dbg(hsotg->dev, "DWC OTG HCD STOP\n"); + + /* + * The root hub should be disconnected before this function is called. + * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue) + * and the QH lists (via ..._hcd_endpoint_disable). + */ + + /* Turn off all host-specific interrupts */ + dwc2_disable_host_interrupts(hsotg); + + /* Turn off the vbus power */ + dev_dbg(hsotg->dev, "PortPower off\n"); + writel(0, hsotg->regs + HPRT0); +} + +static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg, + struct dwc2_hcd_urb *urb, void **ep_handle, + gfp_t mem_flags) +{ + struct dwc2_qtd *qtd; + unsigned long flags; + u32 intr_mask; + int retval; + int dev_speed; + + if (!hsotg->flags.b.port_connect_status) { + /* No longer connected */ + dev_err(hsotg->dev, "Not connected\n"); + return -ENODEV; + } + + dev_speed = dwc2_host_get_speed(hsotg, urb->priv); + + /* Some configurations cannot support LS traffic on a FS root port */ + if ((dev_speed == USB_SPEED_LOW) && + (hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) && + (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI)) { + u32 hprt0 = readl(hsotg->regs + HPRT0); + u32 prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; + + if (prtspd == HPRT0_SPD_FULL_SPEED) + return -ENODEV; + } + + qtd = kzalloc(sizeof(*qtd), mem_flags); + if (!qtd) + return -ENOMEM; + + dwc2_hcd_qtd_init(qtd, urb); + retval = dwc2_hcd_qtd_add(hsotg, qtd, (struct dwc2_qh **)ep_handle, + mem_flags); + if (retval) { + dev_err(hsotg->dev, + "DWC OTG HCD URB Enqueue failed adding QTD. Error status %d\n", + retval); + kfree(qtd); + return retval; + } + + intr_mask = readl(hsotg->regs + GINTMSK); + if (!(intr_mask & GINTSTS_SOF)) { + enum dwc2_transaction_type tr_type; + + if (qtd->qh->ep_type == USB_ENDPOINT_XFER_BULK && + !(qtd->urb->flags & URB_GIVEBACK_ASAP)) + /* + * Do not schedule SG transactions until qtd has + * URB_GIVEBACK_ASAP set + */ + return 0; + + spin_lock_irqsave(&hsotg->lock, flags); + tr_type = dwc2_hcd_select_transactions(hsotg); + if (tr_type != DWC2_TRANSACTION_NONE) + dwc2_hcd_queue_transactions(hsotg, tr_type); + spin_unlock_irqrestore(&hsotg->lock, flags); + } + + return 0; +} + +/* Must be called with interrupt disabled and spinlock held */ +static int dwc2_hcd_urb_dequeue(struct dwc2_hsotg *hsotg, + struct dwc2_hcd_urb *urb) +{ + struct dwc2_qh *qh; + struct dwc2_qtd *urb_qtd; + + urb_qtd = urb->qtd; + if (!urb_qtd) { + dev_dbg(hsotg->dev, "## Urb QTD is NULL ##\n"); + return -EINVAL; + } + + qh = urb_qtd->qh; + if (!qh) { + dev_dbg(hsotg->dev, "## Urb QTD QH is NULL ##\n"); + return -EINVAL; + } + + urb->priv = NULL; + + if (urb_qtd->in_process && qh->channel) { + dwc2_dump_channel_info(hsotg, qh->channel); + + /* The QTD is in process (it has been assigned to a channel) */ + if (hsotg->flags.b.port_connect_status) + /* + * If still connected (i.e. in host mode), halt the + * channel so it can be used for other transfers. If + * no longer connected, the host registers can't be + * written to halt the channel since the core is in + * device mode. + */ + dwc2_hc_halt(hsotg, qh->channel, + DWC2_HC_XFER_URB_DEQUEUE); + } + + /* + * Free the QTD and clean up the associated QH. Leave the QH in the + * schedule if it has any remaining QTDs. + */ + if (hsotg->core_params->dma_desc_enable <= 0) { + u8 in_process = urb_qtd->in_process; + + dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh); + if (in_process) { + dwc2_hcd_qh_deactivate(hsotg, qh, 0); + qh->channel = NULL; + } else if (list_empty(&qh->qtd_list)) { + dwc2_hcd_qh_unlink(hsotg, qh); + } + } else { + dwc2_hcd_qtd_unlink_and_free(hsotg, urb_qtd, qh); + } + + return 0; +} + +/* Must NOT be called with interrupt disabled or spinlock held */ +static int dwc2_hcd_endpoint_disable(struct dwc2_hsotg *hsotg, + struct usb_host_endpoint *ep, int retry) +{ + struct dwc2_qtd *qtd, *qtd_tmp; + struct dwc2_qh *qh; + unsigned long flags; + int rc; + + spin_lock_irqsave(&hsotg->lock, flags); + + qh = ep->hcpriv; + if (!qh) { + rc = -EINVAL; + goto err; + } + + while (!list_empty(&qh->qtd_list) && retry--) { + if (retry == 0) { + dev_err(hsotg->dev, + "## timeout in dwc2_hcd_endpoint_disable() ##\n"); + rc = -EBUSY; + goto err; + } + + spin_unlock_irqrestore(&hsotg->lock, flags); + usleep_range(20000, 40000); + spin_lock_irqsave(&hsotg->lock, flags); + qh = ep->hcpriv; + if (!qh) { + rc = -EINVAL; + goto err; + } + } + + dwc2_hcd_qh_unlink(hsotg, qh); + + /* Free each QTD in the QH's QTD list */ + list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) + dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); + + ep->hcpriv = NULL; + spin_unlock_irqrestore(&hsotg->lock, flags); + dwc2_hcd_qh_free(hsotg, qh); + + return 0; + +err: + ep->hcpriv = NULL; + spin_unlock_irqrestore(&hsotg->lock, flags); + + return rc; +} + +/* Must be called with interrupt disabled and spinlock held */ +static int dwc2_hcd_endpoint_reset(struct dwc2_hsotg *hsotg, + struct usb_host_endpoint *ep) +{ + struct dwc2_qh *qh = ep->hcpriv; + + if (!qh) + return -EINVAL; + + qh->data_toggle = DWC2_HC_PID_DATA0; + + return 0; +} + +/* + * Initializes dynamic portions of the DWC_otg HCD state + * + * Must be called with interrupt disabled and spinlock held + */ +static void dwc2_hcd_reinit(struct dwc2_hsotg *hsotg) +{ + struct dwc2_host_chan *chan, *chan_tmp; + int num_channels; + int i; + + hsotg->flags.d32 = 0; + hsotg->non_periodic_qh_ptr = &hsotg->non_periodic_sched_active; + + if (hsotg->core_params->uframe_sched > 0) { + hsotg->available_host_channels = + hsotg->core_params->host_channels; + } else { + hsotg->non_periodic_channels = 0; + hsotg->periodic_channels = 0; + } + + /* + * Put all channels in the free channel list and clean up channel + * states + */ + list_for_each_entry_safe(chan, chan_tmp, &hsotg->free_hc_list, + hc_list_entry) + list_del_init(&chan->hc_list_entry); + + num_channels = hsotg->core_params->host_channels; + for (i = 0; i < num_channels; i++) { + chan = hsotg->hc_ptr_array[i]; + list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list); + dwc2_hc_cleanup(hsotg, chan); + } + + /* Initialize the DWC core for host mode operation */ + dwc2_core_host_init(hsotg); +} + +static void dwc2_hc_init_split(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb) +{ + int hub_addr, hub_port; + + chan->do_split = 1; + chan->xact_pos = qtd->isoc_split_pos; + chan->complete_split = qtd->complete_split; + dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port); + chan->hub_addr = (u8)hub_addr; + chan->hub_port = (u8)hub_port; +} + +static void *dwc2_hc_init_xfer(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + struct dwc2_qtd *qtd, void *bufptr) +{ + struct dwc2_hcd_urb *urb = qtd->urb; + struct dwc2_hcd_iso_packet_desc *frame_desc; + + switch (dwc2_hcd_get_pipe_type(&urb->pipe_info)) { + case USB_ENDPOINT_XFER_CONTROL: + chan->ep_type = USB_ENDPOINT_XFER_CONTROL; + + switch (qtd->control_phase) { + case DWC2_CONTROL_SETUP: + dev_vdbg(hsotg->dev, " Control setup transaction\n"); + chan->do_ping = 0; + chan->ep_is_in = 0; + chan->data_pid_start = DWC2_HC_PID_SETUP; + if (hsotg->core_params->dma_enable > 0) + chan->xfer_dma = urb->setup_dma; + else + chan->xfer_buf = urb->setup_packet; + chan->xfer_len = 8; + bufptr = NULL; + break; + + case DWC2_CONTROL_DATA: + dev_vdbg(hsotg->dev, " Control data transaction\n"); + chan->data_pid_start = qtd->data_toggle; + break; + + case DWC2_CONTROL_STATUS: + /* + * Direction is opposite of data direction or IN if no + * data + */ + dev_vdbg(hsotg->dev, " Control status transaction\n"); + if (urb->length == 0) + chan->ep_is_in = 1; + else + chan->ep_is_in = + dwc2_hcd_is_pipe_out(&urb->pipe_info); + if (chan->ep_is_in) + chan->do_ping = 0; + chan->data_pid_start = DWC2_HC_PID_DATA1; + chan->xfer_len = 0; + if (hsotg->core_params->dma_enable > 0) + chan->xfer_dma = hsotg->status_buf_dma; + else + chan->xfer_buf = hsotg->status_buf; + bufptr = NULL; + break; + } + break; + + case USB_ENDPOINT_XFER_BULK: + chan->ep_type = USB_ENDPOINT_XFER_BULK; + break; + + case USB_ENDPOINT_XFER_INT: + chan->ep_type = USB_ENDPOINT_XFER_INT; + break; + + case USB_ENDPOINT_XFER_ISOC: + chan->ep_type = USB_ENDPOINT_XFER_ISOC; + if (hsotg->core_params->dma_desc_enable > 0) + break; + + frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; + frame_desc->status = 0; + + if (hsotg->core_params->dma_enable > 0) { + chan->xfer_dma = urb->dma; + chan->xfer_dma += frame_desc->offset + + qtd->isoc_split_offset; + } else { + chan->xfer_buf = urb->buf; + chan->xfer_buf += frame_desc->offset + + qtd->isoc_split_offset; + } + + chan->xfer_len = frame_desc->length - qtd->isoc_split_offset; + + /* For non-dword aligned buffers */ + if (hsotg->core_params->dma_enable > 0 && + (chan->xfer_dma & 0x3)) + bufptr = (u8 *)urb->buf + frame_desc->offset + + qtd->isoc_split_offset; + else + bufptr = NULL; + + if (chan->xact_pos == DWC2_HCSPLT_XACTPOS_ALL) { + if (chan->xfer_len <= 188) + chan->xact_pos = DWC2_HCSPLT_XACTPOS_ALL; + else + chan->xact_pos = DWC2_HCSPLT_XACTPOS_BEGIN; + } + break; + } + + return bufptr; +} + +static int dwc2_hc_setup_align_buf(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, + struct dwc2_host_chan *chan, + struct dwc2_hcd_urb *urb, void *bufptr) +{ + u32 buf_size; + struct urb *usb_urb; + struct usb_hcd *hcd; + + if (!qh->dw_align_buf) { + if (chan->ep_type != USB_ENDPOINT_XFER_ISOC) + buf_size = hsotg->core_params->max_transfer_size; + else + /* 3072 = 3 max-size Isoc packets */ + buf_size = 3072; + + qh->dw_align_buf = dma_alloc_coherent(hsotg->dev, buf_size, + &qh->dw_align_buf_dma, + GFP_ATOMIC); + if (!qh->dw_align_buf) + return -ENOMEM; + qh->dw_align_buf_size = buf_size; + } + + if (chan->xfer_len) { + dev_vdbg(hsotg->dev, "%s(): non-aligned buffer\n", __func__); + usb_urb = urb->priv; + + if (usb_urb) { + if (usb_urb->transfer_flags & + (URB_SETUP_MAP_SINGLE | URB_DMA_MAP_SG | + URB_DMA_MAP_PAGE | URB_DMA_MAP_SINGLE)) { + hcd = dwc2_hsotg_to_hcd(hsotg); + usb_hcd_unmap_urb_for_dma(hcd, usb_urb); + } + if (!chan->ep_is_in) + memcpy(qh->dw_align_buf, bufptr, + chan->xfer_len); + } else { + dev_warn(hsotg->dev, "no URB in dwc2_urb\n"); + } + } + + chan->align_buf = qh->dw_align_buf_dma; + return 0; +} + +/** + * dwc2_assign_and_init_hc() - Assigns transactions from a QTD to a free host + * channel and initializes the host channel to perform the transactions. The + * host channel is removed from the free list. + * + * @hsotg: The HCD state structure + * @qh: Transactions from the first QTD for this QH are selected and assigned + * to a free host channel + */ +static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + struct dwc2_host_chan *chan; + struct dwc2_hcd_urb *urb; + struct dwc2_qtd *qtd; + void *bufptr = NULL; + + if (dbg_qh(qh)) + dev_vdbg(hsotg->dev, "%s(%p,%p)\n", __func__, hsotg, qh); + + if (list_empty(&qh->qtd_list)) { + dev_dbg(hsotg->dev, "No QTDs in QH list\n"); + return -ENOMEM; + } + + if (list_empty(&hsotg->free_hc_list)) { + dev_dbg(hsotg->dev, "No free channel to assign\n"); + return -ENOMEM; + } + + chan = list_first_entry(&hsotg->free_hc_list, struct dwc2_host_chan, + hc_list_entry); + + /* Remove host channel from free list */ + list_del_init(&chan->hc_list_entry); + + qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry); + urb = qtd->urb; + qh->channel = chan; + qtd->in_process = 1; + + /* + * Use usb_pipedevice to determine device address. This address is + * 0 before the SET_ADDRESS command and the correct address afterward. + */ + chan->dev_addr = dwc2_hcd_get_dev_addr(&urb->pipe_info); + chan->ep_num = dwc2_hcd_get_ep_num(&urb->pipe_info); + chan->speed = qh->dev_speed; + chan->max_packet = dwc2_max_packet(qh->maxp); + + chan->xfer_started = 0; + chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS; + chan->error_state = (qtd->error_count > 0); + chan->halt_on_queue = 0; + chan->halt_pending = 0; + chan->requests = 0; + + /* + * The following values may be modified in the transfer type section + * below. The xfer_len value may be reduced when the transfer is + * started to accommodate the max widths of the XferSize and PktCnt + * fields in the HCTSIZn register. + */ + + chan->ep_is_in = (dwc2_hcd_is_pipe_in(&urb->pipe_info) != 0); + if (chan->ep_is_in) + chan->do_ping = 0; + else + chan->do_ping = qh->ping_state; + + chan->data_pid_start = qh->data_toggle; + chan->multi_count = 1; + + if (urb->actual_length > urb->length && + !dwc2_hcd_is_pipe_in(&urb->pipe_info)) + urb->actual_length = urb->length; + + if (hsotg->core_params->dma_enable > 0) { + chan->xfer_dma = urb->dma + urb->actual_length; + + /* For non-dword aligned case */ + if (hsotg->core_params->dma_desc_enable <= 0 && + (chan->xfer_dma & 0x3)) + bufptr = (u8 *)urb->buf + urb->actual_length; + } else { + chan->xfer_buf = (u8 *)urb->buf + urb->actual_length; + } + + chan->xfer_len = urb->length - urb->actual_length; + chan->xfer_count = 0; + + /* Set the split attributes if required */ + if (qh->do_split) + dwc2_hc_init_split(hsotg, chan, qtd, urb); + else + chan->do_split = 0; + + /* Set the transfer attributes */ + bufptr = dwc2_hc_init_xfer(hsotg, chan, qtd, bufptr); + + /* Non DWORD-aligned buffer case */ + if (bufptr) { + dev_vdbg(hsotg->dev, "Non-aligned buffer\n"); + if (dwc2_hc_setup_align_buf(hsotg, qh, chan, urb, bufptr)) { + dev_err(hsotg->dev, + "%s: Failed to allocate memory to handle non-dword aligned buffer\n", + __func__); + /* Add channel back to free list */ + chan->align_buf = 0; + chan->multi_count = 0; + list_add_tail(&chan->hc_list_entry, + &hsotg->free_hc_list); + qtd->in_process = 0; + qh->channel = NULL; + return -ENOMEM; + } + } else { + chan->align_buf = 0; + } + + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) + /* + * This value may be modified when the transfer is started + * to reflect the actual transfer length + */ + chan->multi_count = dwc2_hb_mult(qh->maxp); + + if (hsotg->core_params->dma_desc_enable > 0) + chan->desc_list_addr = qh->desc_list_dma; + + dwc2_hc_init(hsotg, chan); + chan->qh = qh; + + return 0; +} + +/** + * dwc2_hcd_select_transactions() - Selects transactions from the HCD transfer + * schedule and assigns them to available host channels. Called from the HCD + * interrupt handler functions. + * + * @hsotg: The HCD state structure + * + * Return: The types of new transactions that were assigned to host channels + */ +enum dwc2_transaction_type dwc2_hcd_select_transactions( + struct dwc2_hsotg *hsotg) +{ + enum dwc2_transaction_type ret_val = DWC2_TRANSACTION_NONE; + struct list_head *qh_ptr; + struct dwc2_qh *qh; + int num_channels; + +#ifdef DWC2_DEBUG_SOF + dev_vdbg(hsotg->dev, " Select Transactions\n"); +#endif + + /* Process entries in the periodic ready list */ + qh_ptr = hsotg->periodic_sched_ready.next; + while (qh_ptr != &hsotg->periodic_sched_ready) { + if (list_empty(&hsotg->free_hc_list)) + break; + if (hsotg->core_params->uframe_sched > 0) { + if (hsotg->available_host_channels <= 1) + break; + hsotg->available_host_channels--; + } + qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); + if (dwc2_assign_and_init_hc(hsotg, qh)) + break; + + /* + * Move the QH from the periodic ready schedule to the + * periodic assigned schedule + */ + qh_ptr = qh_ptr->next; + list_move(&qh->qh_list_entry, &hsotg->periodic_sched_assigned); + ret_val = DWC2_TRANSACTION_PERIODIC; + } + + /* + * Process entries in the inactive portion of the non-periodic + * schedule. Some free host channels may not be used if they are + * reserved for periodic transfers. + */ + num_channels = hsotg->core_params->host_channels; + qh_ptr = hsotg->non_periodic_sched_inactive.next; + while (qh_ptr != &hsotg->non_periodic_sched_inactive) { + if (hsotg->core_params->uframe_sched <= 0 && + hsotg->non_periodic_channels >= num_channels - + hsotg->periodic_channels) + break; + if (list_empty(&hsotg->free_hc_list)) + break; + qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); + if (hsotg->core_params->uframe_sched > 0) { + if (hsotg->available_host_channels < 1) + break; + hsotg->available_host_channels--; + } + + if (dwc2_assign_and_init_hc(hsotg, qh)) + break; + + /* + * Move the QH from the non-periodic inactive schedule to the + * non-periodic active schedule + */ + qh_ptr = qh_ptr->next; + list_move(&qh->qh_list_entry, + &hsotg->non_periodic_sched_active); + + if (ret_val == DWC2_TRANSACTION_NONE) + ret_val = DWC2_TRANSACTION_NON_PERIODIC; + else + ret_val = DWC2_TRANSACTION_ALL; + + if (hsotg->core_params->uframe_sched <= 0) + hsotg->non_periodic_channels++; + } + + return ret_val; +} + +/** + * dwc2_queue_transaction() - Attempts to queue a single transaction request for + * a host channel associated with either a periodic or non-periodic transfer + * + * @hsotg: The HCD state structure + * @chan: Host channel descriptor associated with either a periodic or + * non-periodic transfer + * @fifo_dwords_avail: Number of DWORDs available in the periodic Tx FIFO + * for periodic transfers or the non-periodic Tx FIFO + * for non-periodic transfers + * + * Return: 1 if a request is queued and more requests may be needed to + * complete the transfer, 0 if no more requests are required for this + * transfer, -1 if there is insufficient space in the Tx FIFO + * + * This function assumes that there is space available in the appropriate + * request queue. For an OUT transfer or SETUP transaction in Slave mode, + * it checks whether space is available in the appropriate Tx FIFO. + * + * Must be called with interrupt disabled and spinlock held + */ +static int dwc2_queue_transaction(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + u16 fifo_dwords_avail) +{ + int retval = 0; + + if (hsotg->core_params->dma_enable > 0) { + if (hsotg->core_params->dma_desc_enable > 0) { + if (!chan->xfer_started || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) { + dwc2_hcd_start_xfer_ddma(hsotg, chan->qh); + chan->qh->ping_state = 0; + } + } else if (!chan->xfer_started) { + dwc2_hc_start_transfer(hsotg, chan); + chan->qh->ping_state = 0; + } + } else if (chan->halt_pending) { + /* Don't queue a request if the channel has been halted */ + } else if (chan->halt_on_queue) { + dwc2_hc_halt(hsotg, chan, chan->halt_status); + } else if (chan->do_ping) { + if (!chan->xfer_started) + dwc2_hc_start_transfer(hsotg, chan); + } else if (!chan->ep_is_in || + chan->data_pid_start == DWC2_HC_PID_SETUP) { + if ((fifo_dwords_avail * 4) >= chan->max_packet) { + if (!chan->xfer_started) { + dwc2_hc_start_transfer(hsotg, chan); + retval = 1; + } else { + retval = dwc2_hc_continue_transfer(hsotg, chan); + } + } else { + retval = -1; + } + } else { + if (!chan->xfer_started) { + dwc2_hc_start_transfer(hsotg, chan); + retval = 1; + } else { + retval = dwc2_hc_continue_transfer(hsotg, chan); + } + } + + return retval; +} + +/* + * Processes periodic channels for the next frame and queues transactions for + * these channels to the DWC_otg controller. After queueing transactions, the + * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions + * to queue as Periodic Tx FIFO or request queue space becomes available. + * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled. + * + * Must be called with interrupt disabled and spinlock held + */ +static void dwc2_process_periodic_channels(struct dwc2_hsotg *hsotg) +{ + struct list_head *qh_ptr; + struct dwc2_qh *qh; + u32 tx_status; + u32 fspcavail; + u32 gintmsk; + int status; + int no_queue_space = 0; + int no_fifo_space = 0; + u32 qspcavail; + + if (dbg_perio()) + dev_vdbg(hsotg->dev, "Queue periodic transactions\n"); + + tx_status = readl(hsotg->regs + HPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> + TXSTS_FSPCAVAIL_SHIFT; + + if (dbg_perio()) { + dev_vdbg(hsotg->dev, " P Tx Req Queue Space Avail (before queue): %d\n", + qspcavail); + dev_vdbg(hsotg->dev, " P Tx FIFO Space Avail (before queue): %d\n", + fspcavail); + } + + qh_ptr = hsotg->periodic_sched_assigned.next; + while (qh_ptr != &hsotg->periodic_sched_assigned) { + tx_status = readl(hsotg->regs + HPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + if (qspcavail == 0) { + no_queue_space = 1; + break; + } + + qh = list_entry(qh_ptr, struct dwc2_qh, qh_list_entry); + if (!qh->channel) { + qh_ptr = qh_ptr->next; + continue; + } + + /* Make sure EP's TT buffer is clean before queueing qtds */ + if (qh->tt_buffer_dirty) { + qh_ptr = qh_ptr->next; + continue; + } + + /* + * Set a flag if we're queuing high-bandwidth in slave mode. + * The flag prevents any halts to get into the request queue in + * the middle of multiple high-bandwidth packets getting queued. + */ + if (hsotg->core_params->dma_enable <= 0 && + qh->channel->multi_count > 1) + hsotg->queuing_high_bandwidth = 1; + + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> + TXSTS_FSPCAVAIL_SHIFT; + status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail); + if (status < 0) { + no_fifo_space = 1; + break; + } + + /* + * In Slave mode, stay on the current transfer until there is + * nothing more to do or the high-bandwidth request count is + * reached. In DMA mode, only need to queue one request. The + * controller automatically handles multiple packets for + * high-bandwidth transfers. + */ + if (hsotg->core_params->dma_enable > 0 || status == 0 || + qh->channel->requests == qh->channel->multi_count) { + qh_ptr = qh_ptr->next; + /* + * Move the QH from the periodic assigned schedule to + * the periodic queued schedule + */ + list_move(&qh->qh_list_entry, + &hsotg->periodic_sched_queued); + + /* done queuing high bandwidth */ + hsotg->queuing_high_bandwidth = 0; + } + } + + if (hsotg->core_params->dma_enable <= 0) { + tx_status = readl(hsotg->regs + HPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> + TXSTS_FSPCAVAIL_SHIFT; + if (dbg_perio()) { + dev_vdbg(hsotg->dev, + " P Tx Req Queue Space Avail (after queue): %d\n", + qspcavail); + dev_vdbg(hsotg->dev, + " P Tx FIFO Space Avail (after queue): %d\n", + fspcavail); + } + + if (!list_empty(&hsotg->periodic_sched_assigned) || + no_queue_space || no_fifo_space) { + /* + * May need to queue more transactions as the request + * queue or Tx FIFO empties. Enable the periodic Tx + * FIFO empty interrupt. (Always use the half-empty + * level to ensure that new requests are loaded as + * soon as possible.) + */ + gintmsk = readl(hsotg->regs + GINTMSK); + gintmsk |= GINTSTS_PTXFEMP; + writel(gintmsk, hsotg->regs + GINTMSK); + } else { + /* + * Disable the Tx FIFO empty interrupt since there are + * no more transactions that need to be queued right + * now. This function is called from interrupt + * handlers to queue more transactions as transfer + * states change. + */ + gintmsk = readl(hsotg->regs + GINTMSK); + gintmsk &= ~GINTSTS_PTXFEMP; + writel(gintmsk, hsotg->regs + GINTMSK); + } + } +} + +/* + * Processes active non-periodic channels and queues transactions for these + * channels to the DWC_otg controller. After queueing transactions, the NP Tx + * FIFO Empty interrupt is enabled if there are more transactions to queue as + * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx + * FIFO Empty interrupt is disabled. + * + * Must be called with interrupt disabled and spinlock held + */ +static void dwc2_process_non_periodic_channels(struct dwc2_hsotg *hsotg) +{ + struct list_head *orig_qh_ptr; + struct dwc2_qh *qh; + u32 tx_status; + u32 qspcavail; + u32 fspcavail; + u32 gintmsk; + int status; + int no_queue_space = 0; + int no_fifo_space = 0; + int more_to_do = 0; + + dev_vdbg(hsotg->dev, "Queue non-periodic transactions\n"); + + tx_status = readl(hsotg->regs + GNPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> + TXSTS_FSPCAVAIL_SHIFT; + dev_vdbg(hsotg->dev, " NP Tx Req Queue Space Avail (before queue): %d\n", + qspcavail); + dev_vdbg(hsotg->dev, " NP Tx FIFO Space Avail (before queue): %d\n", + fspcavail); + + /* + * Keep track of the starting point. Skip over the start-of-list + * entry. + */ + if (hsotg->non_periodic_qh_ptr == &hsotg->non_periodic_sched_active) + hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next; + orig_qh_ptr = hsotg->non_periodic_qh_ptr; + + /* + * Process once through the active list or until no more space is + * available in the request queue or the Tx FIFO + */ + do { + tx_status = readl(hsotg->regs + GNPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + if (hsotg->core_params->dma_enable <= 0 && qspcavail == 0) { + no_queue_space = 1; + break; + } + + qh = list_entry(hsotg->non_periodic_qh_ptr, struct dwc2_qh, + qh_list_entry); + if (!qh->channel) + goto next; + + /* Make sure EP's TT buffer is clean before queueing qtds */ + if (qh->tt_buffer_dirty) + goto next; + + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> + TXSTS_FSPCAVAIL_SHIFT; + status = dwc2_queue_transaction(hsotg, qh->channel, fspcavail); + + if (status > 0) { + more_to_do = 1; + } else if (status < 0) { + no_fifo_space = 1; + break; + } +next: + /* Advance to next QH, skipping start-of-list entry */ + hsotg->non_periodic_qh_ptr = hsotg->non_periodic_qh_ptr->next; + if (hsotg->non_periodic_qh_ptr == + &hsotg->non_periodic_sched_active) + hsotg->non_periodic_qh_ptr = + hsotg->non_periodic_qh_ptr->next; + } while (hsotg->non_periodic_qh_ptr != orig_qh_ptr); + + if (hsotg->core_params->dma_enable <= 0) { + tx_status = readl(hsotg->regs + GNPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> + TXSTS_FSPCAVAIL_SHIFT; + dev_vdbg(hsotg->dev, + " NP Tx Req Queue Space Avail (after queue): %d\n", + qspcavail); + dev_vdbg(hsotg->dev, + " NP Tx FIFO Space Avail (after queue): %d\n", + fspcavail); + + if (more_to_do || no_queue_space || no_fifo_space) { + /* + * May need to queue more transactions as the request + * queue or Tx FIFO empties. Enable the non-periodic + * Tx FIFO empty interrupt. (Always use the half-empty + * level to ensure that new requests are loaded as + * soon as possible.) + */ + gintmsk = readl(hsotg->regs + GINTMSK); + gintmsk |= GINTSTS_NPTXFEMP; + writel(gintmsk, hsotg->regs + GINTMSK); + } else { + /* + * Disable the Tx FIFO empty interrupt since there are + * no more transactions that need to be queued right + * now. This function is called from interrupt + * handlers to queue more transactions as transfer + * states change. + */ + gintmsk = readl(hsotg->regs + GINTMSK); + gintmsk &= ~GINTSTS_NPTXFEMP; + writel(gintmsk, hsotg->regs + GINTMSK); + } + } +} + +/** + * dwc2_hcd_queue_transactions() - Processes the currently active host channels + * and queues transactions for these channels to the DWC_otg controller. Called + * from the HCD interrupt handler functions. + * + * @hsotg: The HCD state structure + * @tr_type: The type(s) of transactions to queue (non-periodic, periodic, + * or both) + * + * Must be called with interrupt disabled and spinlock held + */ +void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg, + enum dwc2_transaction_type tr_type) +{ +#ifdef DWC2_DEBUG_SOF + dev_vdbg(hsotg->dev, "Queue Transactions\n"); +#endif + /* Process host channels associated with periodic transfers */ + if ((tr_type == DWC2_TRANSACTION_PERIODIC || + tr_type == DWC2_TRANSACTION_ALL) && + !list_empty(&hsotg->periodic_sched_assigned)) + dwc2_process_periodic_channels(hsotg); + + /* Process host channels associated with non-periodic transfers */ + if (tr_type == DWC2_TRANSACTION_NON_PERIODIC || + tr_type == DWC2_TRANSACTION_ALL) { + if (!list_empty(&hsotg->non_periodic_sched_active)) { + dwc2_process_non_periodic_channels(hsotg); + } else { + /* + * Ensure NP Tx FIFO empty interrupt is disabled when + * there are no non-periodic transfers to process + */ + u32 gintmsk = readl(hsotg->regs + GINTMSK); + + gintmsk &= ~GINTSTS_NPTXFEMP; + writel(gintmsk, hsotg->regs + GINTMSK); + } + } +} + +static void dwc2_conn_id_status_change(struct work_struct *work) +{ + struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, + wf_otg); + u32 count = 0; + u32 gotgctl; + + dev_dbg(hsotg->dev, "%s()\n", __func__); + + gotgctl = readl(hsotg->regs + GOTGCTL); + dev_dbg(hsotg->dev, "gotgctl=%0x\n", gotgctl); + dev_dbg(hsotg->dev, "gotgctl.b.conidsts=%d\n", + !!(gotgctl & GOTGCTL_CONID_B)); + + /* B-Device connector (Device Mode) */ + if (gotgctl & GOTGCTL_CONID_B) { + /* Wait for switch to device mode */ + dev_dbg(hsotg->dev, "connId B\n"); + while (!dwc2_is_device_mode(hsotg)) { + dev_info(hsotg->dev, + "Waiting for Peripheral Mode, Mode=%s\n", + dwc2_is_host_mode(hsotg) ? "Host" : + "Peripheral"); + usleep_range(20000, 40000); + if (++count > 250) + break; + } + if (count > 250) + dev_err(hsotg->dev, + "Connection id status change timed out\n"); + hsotg->op_state = OTG_STATE_B_PERIPHERAL; + dwc2_core_init(hsotg, false, -1); + dwc2_enable_global_interrupts(hsotg); + s3c_hsotg_core_init_disconnected(hsotg, false); + s3c_hsotg_core_connect(hsotg); + } else { + /* A-Device connector (Host Mode) */ + dev_dbg(hsotg->dev, "connId A\n"); + while (!dwc2_is_host_mode(hsotg)) { + dev_info(hsotg->dev, "Waiting for Host Mode, Mode=%s\n", + dwc2_is_host_mode(hsotg) ? + "Host" : "Peripheral"); + usleep_range(20000, 40000); + if (++count > 250) + break; + } + if (count > 250) + dev_err(hsotg->dev, + "Connection id status change timed out\n"); + hsotg->op_state = OTG_STATE_A_HOST; + + /* Initialize the Core for Host mode */ + dwc2_core_init(hsotg, false, -1); + dwc2_enable_global_interrupts(hsotg); + dwc2_hcd_start(hsotg); + } +} + +static void dwc2_wakeup_detected(unsigned long data) +{ + struct dwc2_hsotg *hsotg = (struct dwc2_hsotg *)data; + u32 hprt0; + + dev_dbg(hsotg->dev, "%s()\n", __func__); + + /* + * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms + * so that OPT tests pass with all PHYs.) + */ + hprt0 = dwc2_read_hprt0(hsotg); + dev_dbg(hsotg->dev, "Resume: HPRT0=%0x\n", hprt0); + hprt0 &= ~HPRT0_RES; + writel(hprt0, hsotg->regs + HPRT0); + dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n", + readl(hsotg->regs + HPRT0)); + + dwc2_hcd_rem_wakeup(hsotg); + + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; +} + +static int dwc2_host_is_b_hnp_enabled(struct dwc2_hsotg *hsotg) +{ + struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); + + return hcd->self.b_hnp_enable; +} + +/* Must NOT be called with interrupt disabled or spinlock held */ +static void dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex) +{ + unsigned long flags; + u32 hprt0; + u32 pcgctl; + u32 gotgctl; + + dev_dbg(hsotg->dev, "%s()\n", __func__); + + spin_lock_irqsave(&hsotg->lock, flags); + + if (windex == hsotg->otg_port && dwc2_host_is_b_hnp_enabled(hsotg)) { + gotgctl = readl(hsotg->regs + GOTGCTL); + gotgctl |= GOTGCTL_HSTSETHNPEN; + writel(gotgctl, hsotg->regs + GOTGCTL); + hsotg->op_state = OTG_STATE_A_SUSPEND; + } + + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_SUSP; + writel(hprt0, hsotg->regs + HPRT0); + + /* Update lx_state */ + hsotg->lx_state = DWC2_L2; + + /* Suspend the Phy Clock */ + pcgctl = readl(hsotg->regs + PCGCTL); + pcgctl |= PCGCTL_STOPPCLK; + writel(pcgctl, hsotg->regs + PCGCTL); + udelay(10); + + /* For HNP the bus must be suspended for at least 200ms */ + if (dwc2_host_is_b_hnp_enabled(hsotg)) { + pcgctl = readl(hsotg->regs + PCGCTL); + pcgctl &= ~PCGCTL_STOPPCLK; + writel(pcgctl, hsotg->regs + PCGCTL); + + spin_unlock_irqrestore(&hsotg->lock, flags); + + usleep_range(200000, 250000); + } else { + spin_unlock_irqrestore(&hsotg->lock, flags); + } +} + +/* Handles hub class-specific requests */ +static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq, + u16 wvalue, u16 windex, char *buf, u16 wlength) +{ + struct usb_hub_descriptor *hub_desc; + int retval = 0; + u32 hprt0; + u32 port_status; + u32 speed; + u32 pcgctl; + + switch (typereq) { + case ClearHubFeature: + dev_dbg(hsotg->dev, "ClearHubFeature %1xh\n", wvalue); + + switch (wvalue) { + case C_HUB_LOCAL_POWER: + case C_HUB_OVER_CURRENT: + /* Nothing required here */ + break; + + default: + retval = -EINVAL; + dev_err(hsotg->dev, + "ClearHubFeature request %1xh unknown\n", + wvalue); + } + break; + + case ClearPortFeature: + if (wvalue != USB_PORT_FEAT_L1) + if (!windex || windex > 1) + goto error; + switch (wvalue) { + case USB_PORT_FEAT_ENABLE: + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_ENA; + writel(hprt0, hsotg->regs + HPRT0); + break; + + case USB_PORT_FEAT_SUSPEND: + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); + writel(0, hsotg->regs + PCGCTL); + usleep_range(20000, 40000); + + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_RES; + writel(hprt0, hsotg->regs + HPRT0); + hprt0 &= ~HPRT0_SUSP; + msleep(USB_RESUME_TIMEOUT); + + hprt0 &= ~HPRT0_RES; + writel(hprt0, hsotg->regs + HPRT0); + break; + + case USB_PORT_FEAT_POWER: + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_POWER\n"); + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 &= ~HPRT0_PWR; + writel(hprt0, hsotg->regs + HPRT0); + break; + + case USB_PORT_FEAT_INDICATOR: + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); + /* Port indicator not supported */ + break; + + case USB_PORT_FEAT_C_CONNECTION: + /* + * Clears driver's internal Connect Status Change flag + */ + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); + hsotg->flags.b.port_connect_status_change = 0; + break; + + case USB_PORT_FEAT_C_RESET: + /* Clears driver's internal Port Reset Change flag */ + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); + hsotg->flags.b.port_reset_change = 0; + break; + + case USB_PORT_FEAT_C_ENABLE: + /* + * Clears the driver's internal Port Enable/Disable + * Change flag + */ + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); + hsotg->flags.b.port_enable_change = 0; + break; + + case USB_PORT_FEAT_C_SUSPEND: + /* + * Clears the driver's internal Port Suspend Change + * flag, which is set when resume signaling on the host + * port is complete + */ + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); + hsotg->flags.b.port_suspend_change = 0; + break; + + case USB_PORT_FEAT_C_PORT_L1: + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_C_PORT_L1\n"); + hsotg->flags.b.port_l1_change = 0; + break; + + case USB_PORT_FEAT_C_OVER_CURRENT: + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); + hsotg->flags.b.port_over_current_change = 0; + break; + + default: + retval = -EINVAL; + dev_err(hsotg->dev, + "ClearPortFeature request %1xh unknown or unsupported\n", + wvalue); + } + break; + + case GetHubDescriptor: + dev_dbg(hsotg->dev, "GetHubDescriptor\n"); + hub_desc = (struct usb_hub_descriptor *)buf; + hub_desc->bDescLength = 9; + hub_desc->bDescriptorType = USB_DT_HUB; + hub_desc->bNbrPorts = 1; + hub_desc->wHubCharacteristics = + cpu_to_le16(HUB_CHAR_COMMON_LPSM | + HUB_CHAR_INDV_PORT_OCPM); + hub_desc->bPwrOn2PwrGood = 1; + hub_desc->bHubContrCurrent = 0; + hub_desc->u.hs.DeviceRemovable[0] = 0; + hub_desc->u.hs.DeviceRemovable[1] = 0xff; + break; + + case GetHubStatus: + dev_dbg(hsotg->dev, "GetHubStatus\n"); + memset(buf, 0, 4); + break; + + case GetPortStatus: + dev_vdbg(hsotg->dev, + "GetPortStatus wIndex=0x%04x flags=0x%08x\n", windex, + hsotg->flags.d32); + if (!windex || windex > 1) + goto error; + + port_status = 0; + if (hsotg->flags.b.port_connect_status_change) + port_status |= USB_PORT_STAT_C_CONNECTION << 16; + if (hsotg->flags.b.port_enable_change) + port_status |= USB_PORT_STAT_C_ENABLE << 16; + if (hsotg->flags.b.port_suspend_change) + port_status |= USB_PORT_STAT_C_SUSPEND << 16; + if (hsotg->flags.b.port_l1_change) + port_status |= USB_PORT_STAT_C_L1 << 16; + if (hsotg->flags.b.port_reset_change) + port_status |= USB_PORT_STAT_C_RESET << 16; + if (hsotg->flags.b.port_over_current_change) { + dev_warn(hsotg->dev, "Overcurrent change detected\n"); + port_status |= USB_PORT_STAT_C_OVERCURRENT << 16; + } + + if (!hsotg->flags.b.port_connect_status) { + /* + * The port is disconnected, which means the core is + * either in device mode or it soon will be. Just + * return 0's for the remainder of the port status + * since the port register can't be read if the core + * is in device mode. + */ + *(__le32 *)buf = cpu_to_le32(port_status); + break; + } + + hprt0 = readl(hsotg->regs + HPRT0); + dev_vdbg(hsotg->dev, " HPRT0: 0x%08x\n", hprt0); + + if (hprt0 & HPRT0_CONNSTS) + port_status |= USB_PORT_STAT_CONNECTION; + if (hprt0 & HPRT0_ENA) + port_status |= USB_PORT_STAT_ENABLE; + if (hprt0 & HPRT0_SUSP) + port_status |= USB_PORT_STAT_SUSPEND; + if (hprt0 & HPRT0_OVRCURRACT) + port_status |= USB_PORT_STAT_OVERCURRENT; + if (hprt0 & HPRT0_RST) + port_status |= USB_PORT_STAT_RESET; + if (hprt0 & HPRT0_PWR) + port_status |= USB_PORT_STAT_POWER; + + speed = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; + if (speed == HPRT0_SPD_HIGH_SPEED) + port_status |= USB_PORT_STAT_HIGH_SPEED; + else if (speed == HPRT0_SPD_LOW_SPEED) + port_status |= USB_PORT_STAT_LOW_SPEED; + + if (hprt0 & HPRT0_TSTCTL_MASK) + port_status |= USB_PORT_STAT_TEST; + /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ + + dev_vdbg(hsotg->dev, "port_status=%08x\n", port_status); + *(__le32 *)buf = cpu_to_le32(port_status); + break; + + case SetHubFeature: + dev_dbg(hsotg->dev, "SetHubFeature\n"); + /* No HUB features supported */ + break; + + case SetPortFeature: + dev_dbg(hsotg->dev, "SetPortFeature\n"); + if (wvalue != USB_PORT_FEAT_TEST && (!windex || windex > 1)) + goto error; + + if (!hsotg->flags.b.port_connect_status) { + /* + * The port is disconnected, which means the core is + * either in device mode or it soon will be. Just + * return without doing anything since the port + * register can't be written if the core is in device + * mode. + */ + break; + } + + switch (wvalue) { + case USB_PORT_FEAT_SUSPEND: + dev_dbg(hsotg->dev, + "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); + if (windex != hsotg->otg_port) + goto error; + dwc2_port_suspend(hsotg, windex); + break; + + case USB_PORT_FEAT_POWER: + dev_dbg(hsotg->dev, + "SetPortFeature - USB_PORT_FEAT_POWER\n"); + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_PWR; + writel(hprt0, hsotg->regs + HPRT0); + break; + + case USB_PORT_FEAT_RESET: + hprt0 = dwc2_read_hprt0(hsotg); + dev_dbg(hsotg->dev, + "SetPortFeature - USB_PORT_FEAT_RESET\n"); + pcgctl = readl(hsotg->regs + PCGCTL); + pcgctl &= ~(PCGCTL_ENBL_SLEEP_GATING | PCGCTL_STOPPCLK); + writel(pcgctl, hsotg->regs + PCGCTL); + /* ??? Original driver does this */ + writel(0, hsotg->regs + PCGCTL); + + hprt0 = dwc2_read_hprt0(hsotg); + /* Clear suspend bit if resetting from suspend state */ + hprt0 &= ~HPRT0_SUSP; + + /* + * When B-Host the Port reset bit is set in the Start + * HCD Callback function, so that the reset is started + * within 1ms of the HNP success interrupt + */ + if (!dwc2_hcd_is_b_host(hsotg)) { + hprt0 |= HPRT0_PWR | HPRT0_RST; + dev_dbg(hsotg->dev, + "In host mode, hprt0=%08x\n", hprt0); + writel(hprt0, hsotg->regs + HPRT0); + } + + /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ + usleep_range(50000, 70000); + hprt0 &= ~HPRT0_RST; + writel(hprt0, hsotg->regs + HPRT0); + hsotg->lx_state = DWC2_L0; /* Now back to On state */ + break; + + case USB_PORT_FEAT_INDICATOR: + dev_dbg(hsotg->dev, + "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); + /* Not supported */ + break; + + default: + retval = -EINVAL; + dev_err(hsotg->dev, + "SetPortFeature %1xh unknown or unsupported\n", + wvalue); + break; + } + break; + + default: +error: + retval = -EINVAL; + dev_dbg(hsotg->dev, + "Unknown hub control request: %1xh wIndex: %1xh wValue: %1xh\n", + typereq, windex, wvalue); + break; + } + + return retval; +} + +static int dwc2_hcd_is_status_changed(struct dwc2_hsotg *hsotg, int port) +{ + int retval; + + if (port != 1) + return -EINVAL; + + retval = (hsotg->flags.b.port_connect_status_change || + hsotg->flags.b.port_reset_change || + hsotg->flags.b.port_enable_change || + hsotg->flags.b.port_suspend_change || + hsotg->flags.b.port_over_current_change); + + if (retval) { + dev_dbg(hsotg->dev, + "DWC OTG HCD HUB STATUS DATA: Root port status changed\n"); + dev_dbg(hsotg->dev, " port_connect_status_change: %d\n", + hsotg->flags.b.port_connect_status_change); + dev_dbg(hsotg->dev, " port_reset_change: %d\n", + hsotg->flags.b.port_reset_change); + dev_dbg(hsotg->dev, " port_enable_change: %d\n", + hsotg->flags.b.port_enable_change); + dev_dbg(hsotg->dev, " port_suspend_change: %d\n", + hsotg->flags.b.port_suspend_change); + dev_dbg(hsotg->dev, " port_over_current_change: %d\n", + hsotg->flags.b.port_over_current_change); + } + + return retval; +} + +int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg) +{ + u32 hfnum = readl(hsotg->regs + HFNUM); + +#ifdef DWC2_DEBUG_SOF + dev_vdbg(hsotg->dev, "DWC OTG HCD GET FRAME NUMBER %d\n", + (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT); +#endif + return (hfnum & HFNUM_FRNUM_MASK) >> HFNUM_FRNUM_SHIFT; +} + +int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg) +{ + return hsotg->op_state == OTG_STATE_B_HOST; +} + +static struct dwc2_hcd_urb *dwc2_hcd_urb_alloc(struct dwc2_hsotg *hsotg, + int iso_desc_count, + gfp_t mem_flags) +{ + struct dwc2_hcd_urb *urb; + u32 size = sizeof(*urb) + iso_desc_count * + sizeof(struct dwc2_hcd_iso_packet_desc); + + urb = kzalloc(size, mem_flags); + if (urb) + urb->packet_count = iso_desc_count; + return urb; +} + +static void dwc2_hcd_urb_set_pipeinfo(struct dwc2_hsotg *hsotg, + struct dwc2_hcd_urb *urb, u8 dev_addr, + u8 ep_num, u8 ep_type, u8 ep_dir, u16 mps) +{ + if (dbg_perio() || + ep_type == USB_ENDPOINT_XFER_BULK || + ep_type == USB_ENDPOINT_XFER_CONTROL) + dev_vdbg(hsotg->dev, + "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, mps=%d\n", + dev_addr, ep_num, ep_dir, ep_type, mps); + urb->pipe_info.dev_addr = dev_addr; + urb->pipe_info.ep_num = ep_num; + urb->pipe_info.pipe_type = ep_type; + urb->pipe_info.pipe_dir = ep_dir; + urb->pipe_info.mps = mps; +} + +/* + * NOTE: This function will be removed once the peripheral controller code + * is integrated and the driver is stable + */ +void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg) +{ +#ifdef DEBUG + struct dwc2_host_chan *chan; + struct dwc2_hcd_urb *urb; + struct dwc2_qtd *qtd; + int num_channels; + u32 np_tx_status; + u32 p_tx_status; + int i; + + num_channels = hsotg->core_params->host_channels; + dev_dbg(hsotg->dev, "\n"); + dev_dbg(hsotg->dev, + "************************************************************\n"); + dev_dbg(hsotg->dev, "HCD State:\n"); + dev_dbg(hsotg->dev, " Num channels: %d\n", num_channels); + + for (i = 0; i < num_channels; i++) { + chan = hsotg->hc_ptr_array[i]; + dev_dbg(hsotg->dev, " Channel %d:\n", i); + dev_dbg(hsotg->dev, + " dev_addr: %d, ep_num: %d, ep_is_in: %d\n", + chan->dev_addr, chan->ep_num, chan->ep_is_in); + dev_dbg(hsotg->dev, " speed: %d\n", chan->speed); + dev_dbg(hsotg->dev, " ep_type: %d\n", chan->ep_type); + dev_dbg(hsotg->dev, " max_packet: %d\n", chan->max_packet); + dev_dbg(hsotg->dev, " data_pid_start: %d\n", + chan->data_pid_start); + dev_dbg(hsotg->dev, " multi_count: %d\n", chan->multi_count); + dev_dbg(hsotg->dev, " xfer_started: %d\n", + chan->xfer_started); + dev_dbg(hsotg->dev, " xfer_buf: %p\n", chan->xfer_buf); + dev_dbg(hsotg->dev, " xfer_dma: %08lx\n", + (unsigned long)chan->xfer_dma); + dev_dbg(hsotg->dev, " xfer_len: %d\n", chan->xfer_len); + dev_dbg(hsotg->dev, " xfer_count: %d\n", chan->xfer_count); + dev_dbg(hsotg->dev, " halt_on_queue: %d\n", + chan->halt_on_queue); + dev_dbg(hsotg->dev, " halt_pending: %d\n", + chan->halt_pending); + dev_dbg(hsotg->dev, " halt_status: %d\n", chan->halt_status); + dev_dbg(hsotg->dev, " do_split: %d\n", chan->do_split); + dev_dbg(hsotg->dev, " complete_split: %d\n", + chan->complete_split); + dev_dbg(hsotg->dev, " hub_addr: %d\n", chan->hub_addr); + dev_dbg(hsotg->dev, " hub_port: %d\n", chan->hub_port); + dev_dbg(hsotg->dev, " xact_pos: %d\n", chan->xact_pos); + dev_dbg(hsotg->dev, " requests: %d\n", chan->requests); + dev_dbg(hsotg->dev, " qh: %p\n", chan->qh); + + if (chan->xfer_started) { + u32 hfnum, hcchar, hctsiz, hcint, hcintmsk; + + hfnum = readl(hsotg->regs + HFNUM); + hcchar = readl(hsotg->regs + HCCHAR(i)); + hctsiz = readl(hsotg->regs + HCTSIZ(i)); + hcint = readl(hsotg->regs + HCINT(i)); + hcintmsk = readl(hsotg->regs + HCINTMSK(i)); + dev_dbg(hsotg->dev, " hfnum: 0x%08x\n", hfnum); + dev_dbg(hsotg->dev, " hcchar: 0x%08x\n", hcchar); + dev_dbg(hsotg->dev, " hctsiz: 0x%08x\n", hctsiz); + dev_dbg(hsotg->dev, " hcint: 0x%08x\n", hcint); + dev_dbg(hsotg->dev, " hcintmsk: 0x%08x\n", hcintmsk); + } + + if (!(chan->xfer_started && chan->qh)) + continue; + + list_for_each_entry(qtd, &chan->qh->qtd_list, qtd_list_entry) { + if (!qtd->in_process) + break; + urb = qtd->urb; + dev_dbg(hsotg->dev, " URB Info:\n"); + dev_dbg(hsotg->dev, " qtd: %p, urb: %p\n", + qtd, urb); + if (urb) { + dev_dbg(hsotg->dev, + " Dev: %d, EP: %d %s\n", + dwc2_hcd_get_dev_addr(&urb->pipe_info), + dwc2_hcd_get_ep_num(&urb->pipe_info), + dwc2_hcd_is_pipe_in(&urb->pipe_info) ? + "IN" : "OUT"); + dev_dbg(hsotg->dev, + " Max packet size: %d\n", + dwc2_hcd_get_mps(&urb->pipe_info)); + dev_dbg(hsotg->dev, + " transfer_buffer: %p\n", + urb->buf); + dev_dbg(hsotg->dev, + " transfer_dma: %08lx\n", + (unsigned long)urb->dma); + dev_dbg(hsotg->dev, + " transfer_buffer_length: %d\n", + urb->length); + dev_dbg(hsotg->dev, " actual_length: %d\n", + urb->actual_length); + } + } + } + + dev_dbg(hsotg->dev, " non_periodic_channels: %d\n", + hsotg->non_periodic_channels); + dev_dbg(hsotg->dev, " periodic_channels: %d\n", + hsotg->periodic_channels); + dev_dbg(hsotg->dev, " periodic_usecs: %d\n", hsotg->periodic_usecs); + np_tx_status = readl(hsotg->regs + GNPTXSTS); + dev_dbg(hsotg->dev, " NP Tx Req Queue Space Avail: %d\n", + (np_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT); + dev_dbg(hsotg->dev, " NP Tx FIFO Space Avail: %d\n", + (np_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT); + p_tx_status = readl(hsotg->regs + HPTXSTS); + dev_dbg(hsotg->dev, " P Tx Req Queue Space Avail: %d\n", + (p_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT); + dev_dbg(hsotg->dev, " P Tx FIFO Space Avail: %d\n", + (p_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT); + dwc2_hcd_dump_frrem(hsotg); + dwc2_dump_global_registers(hsotg); + dwc2_dump_host_registers(hsotg); + dev_dbg(hsotg->dev, + "************************************************************\n"); + dev_dbg(hsotg->dev, "\n"); +#endif +} + +/* + * NOTE: This function will be removed once the peripheral controller code + * is integrated and the driver is stable + */ +void dwc2_hcd_dump_frrem(struct dwc2_hsotg *hsotg) +{ +#ifdef DWC2_DUMP_FRREM + dev_dbg(hsotg->dev, "Frame remaining at SOF:\n"); + dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", + hsotg->frrem_samples, hsotg->frrem_accum, + hsotg->frrem_samples > 0 ? + hsotg->frrem_accum / hsotg->frrem_samples : 0); + dev_dbg(hsotg->dev, "\n"); + dev_dbg(hsotg->dev, "Frame remaining at start_transfer (uframe 7):\n"); + dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", + hsotg->hfnum_7_samples, + hsotg->hfnum_7_frrem_accum, + hsotg->hfnum_7_samples > 0 ? + hsotg->hfnum_7_frrem_accum / hsotg->hfnum_7_samples : 0); + dev_dbg(hsotg->dev, "Frame remaining at start_transfer (uframe 0):\n"); + dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", + hsotg->hfnum_0_samples, + hsotg->hfnum_0_frrem_accum, + hsotg->hfnum_0_samples > 0 ? + hsotg->hfnum_0_frrem_accum / hsotg->hfnum_0_samples : 0); + dev_dbg(hsotg->dev, "Frame remaining at start_transfer (uframe 1-6):\n"); + dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", + hsotg->hfnum_other_samples, + hsotg->hfnum_other_frrem_accum, + hsotg->hfnum_other_samples > 0 ? + hsotg->hfnum_other_frrem_accum / hsotg->hfnum_other_samples : + 0); + dev_dbg(hsotg->dev, "\n"); + dev_dbg(hsotg->dev, "Frame remaining at sample point A (uframe 7):\n"); + dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", + hsotg->hfnum_7_samples_a, hsotg->hfnum_7_frrem_accum_a, + hsotg->hfnum_7_samples_a > 0 ? + hsotg->hfnum_7_frrem_accum_a / hsotg->hfnum_7_samples_a : 0); + dev_dbg(hsotg->dev, "Frame remaining at sample point A (uframe 0):\n"); + dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", + hsotg->hfnum_0_samples_a, hsotg->hfnum_0_frrem_accum_a, + hsotg->hfnum_0_samples_a > 0 ? + hsotg->hfnum_0_frrem_accum_a / hsotg->hfnum_0_samples_a : 0); + dev_dbg(hsotg->dev, "Frame remaining at sample point A (uframe 1-6):\n"); + dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", + hsotg->hfnum_other_samples_a, hsotg->hfnum_other_frrem_accum_a, + hsotg->hfnum_other_samples_a > 0 ? + hsotg->hfnum_other_frrem_accum_a / hsotg->hfnum_other_samples_a + : 0); + dev_dbg(hsotg->dev, "\n"); + dev_dbg(hsotg->dev, "Frame remaining at sample point B (uframe 7):\n"); + dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", + hsotg->hfnum_7_samples_b, hsotg->hfnum_7_frrem_accum_b, + hsotg->hfnum_7_samples_b > 0 ? + hsotg->hfnum_7_frrem_accum_b / hsotg->hfnum_7_samples_b : 0); + dev_dbg(hsotg->dev, "Frame remaining at sample point B (uframe 0):\n"); + dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", + hsotg->hfnum_0_samples_b, hsotg->hfnum_0_frrem_accum_b, + (hsotg->hfnum_0_samples_b > 0) ? + hsotg->hfnum_0_frrem_accum_b / hsotg->hfnum_0_samples_b : 0); + dev_dbg(hsotg->dev, "Frame remaining at sample point B (uframe 1-6):\n"); + dev_dbg(hsotg->dev, " samples %u, accum %llu, avg %llu\n", + hsotg->hfnum_other_samples_b, hsotg->hfnum_other_frrem_accum_b, + (hsotg->hfnum_other_samples_b > 0) ? + hsotg->hfnum_other_frrem_accum_b / hsotg->hfnum_other_samples_b + : 0); +#endif +} + +struct wrapper_priv_data { + struct dwc2_hsotg *hsotg; +}; + +/* Gets the dwc2_hsotg from a usb_hcd */ +static struct dwc2_hsotg *dwc2_hcd_to_hsotg(struct usb_hcd *hcd) +{ + struct wrapper_priv_data *p; + + p = (struct wrapper_priv_data *) &hcd->hcd_priv; + return p->hsotg; +} + +static int _dwc2_hcd_start(struct usb_hcd *hcd); + +void dwc2_host_start(struct dwc2_hsotg *hsotg) +{ + struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); + + hcd->self.is_b_host = dwc2_hcd_is_b_host(hsotg); + _dwc2_hcd_start(hcd); +} + +void dwc2_host_disconnect(struct dwc2_hsotg *hsotg) +{ + struct usb_hcd *hcd = dwc2_hsotg_to_hcd(hsotg); + + hcd->self.is_b_host = 0; +} + +void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context, int *hub_addr, + int *hub_port) +{ + struct urb *urb = context; + + if (urb->dev->tt) + *hub_addr = urb->dev->tt->hub->devnum; + else + *hub_addr = 0; + *hub_port = urb->dev->ttport; +} + +int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context) +{ + struct urb *urb = context; + + return urb->dev->speed; +} + +static void dwc2_allocate_bus_bandwidth(struct usb_hcd *hcd, u16 bw, + struct urb *urb) +{ + struct usb_bus *bus = hcd_to_bus(hcd); + + if (urb->interval) + bus->bandwidth_allocated += bw / urb->interval; + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) + bus->bandwidth_isoc_reqs++; + else + bus->bandwidth_int_reqs++; +} + +static void dwc2_free_bus_bandwidth(struct usb_hcd *hcd, u16 bw, + struct urb *urb) +{ + struct usb_bus *bus = hcd_to_bus(hcd); + + if (urb->interval) + bus->bandwidth_allocated -= bw / urb->interval; + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) + bus->bandwidth_isoc_reqs--; + else + bus->bandwidth_int_reqs--; +} + +/* + * Sets the final status of an URB and returns it to the upper layer. Any + * required cleanup of the URB is performed. + * + * Must be called with interrupt disabled and spinlock held + */ +void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd, + int status) +{ + struct urb *urb; + int i; + + if (!qtd) { + dev_dbg(hsotg->dev, "## %s: qtd is NULL ##\n", __func__); + return; + } + + if (!qtd->urb) { + dev_dbg(hsotg->dev, "## %s: qtd->urb is NULL ##\n", __func__); + return; + } + + urb = qtd->urb->priv; + if (!urb) { + dev_dbg(hsotg->dev, "## %s: urb->priv is NULL ##\n", __func__); + return; + } + + urb->actual_length = dwc2_hcd_urb_get_actual_length(qtd->urb); + + if (dbg_urb(urb)) + dev_vdbg(hsotg->dev, + "%s: urb %p device %d ep %d-%s status %d actual %d\n", + __func__, urb, usb_pipedevice(urb->pipe), + usb_pipeendpoint(urb->pipe), + usb_pipein(urb->pipe) ? "IN" : "OUT", status, + urb->actual_length); + + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS && dbg_perio()) { + for (i = 0; i < urb->number_of_packets; i++) + dev_vdbg(hsotg->dev, " ISO Desc %d status %d\n", + i, urb->iso_frame_desc[i].status); + } + + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { + urb->error_count = dwc2_hcd_urb_get_error_count(qtd->urb); + for (i = 0; i < urb->number_of_packets; ++i) { + urb->iso_frame_desc[i].actual_length = + dwc2_hcd_urb_get_iso_desc_actual_length( + qtd->urb, i); + urb->iso_frame_desc[i].status = + dwc2_hcd_urb_get_iso_desc_status(qtd->urb, i); + } + } + + urb->status = status; + if (!status) { + if ((urb->transfer_flags & URB_SHORT_NOT_OK) && + urb->actual_length < urb->transfer_buffer_length) + urb->status = -EREMOTEIO; + } + + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS || + usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { + struct usb_host_endpoint *ep = urb->ep; + + if (ep) + dwc2_free_bus_bandwidth(dwc2_hsotg_to_hcd(hsotg), + dwc2_hcd_get_ep_bandwidth(hsotg, ep), + urb); + } + + usb_hcd_unlink_urb_from_ep(dwc2_hsotg_to_hcd(hsotg), urb); + urb->hcpriv = NULL; + kfree(qtd->urb); + qtd->urb = NULL; + + spin_unlock(&hsotg->lock); + usb_hcd_giveback_urb(dwc2_hsotg_to_hcd(hsotg), urb, status); + spin_lock(&hsotg->lock); +} + +/* + * Work queue function for starting the HCD when A-Cable is connected + */ +static void dwc2_hcd_start_func(struct work_struct *work) +{ + struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, + start_work.work); + + dev_dbg(hsotg->dev, "%s() %p\n", __func__, hsotg); + dwc2_host_start(hsotg); +} + +/* + * Reset work queue function + */ +static void dwc2_hcd_reset_func(struct work_struct *work) +{ + struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg, + reset_work.work); + u32 hprt0; + + dev_dbg(hsotg->dev, "USB RESET function called\n"); + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 &= ~HPRT0_RST; + writel(hprt0, hsotg->regs + HPRT0); + hsotg->flags.b.port_reset_change = 1; +} + +/* + * ========================================================================= + * Linux HC Driver Functions + * ========================================================================= + */ + +/* + * Initializes the DWC_otg controller and its root hub and prepares it for host + * mode operation. Activates the root port. Returns 0 on success and a negative + * error code on failure. + */ +static int _dwc2_hcd_start(struct usb_hcd *hcd) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + struct usb_bus *bus = hcd_to_bus(hcd); + unsigned long flags; + + dev_dbg(hsotg->dev, "DWC OTG HCD START\n"); + + spin_lock_irqsave(&hsotg->lock, flags); + + hcd->state = HC_STATE_RUNNING; + + if (dwc2_is_device_mode(hsotg)) { + spin_unlock_irqrestore(&hsotg->lock, flags); + return 0; /* why 0 ?? */ + } + + dwc2_hcd_reinit(hsotg); + + /* Initialize and connect root hub if one is not already attached */ + if (bus->root_hub) { + dev_dbg(hsotg->dev, "DWC OTG HCD Has Root Hub\n"); + /* Inform the HUB driver to resume */ + usb_hcd_resume_root_hub(hcd); + } + + spin_unlock_irqrestore(&hsotg->lock, flags); + return 0; +} + +/* + * Halts the DWC_otg host mode operations in a clean manner. USB transfers are + * stopped. + */ +static void _dwc2_hcd_stop(struct usb_hcd *hcd) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + unsigned long flags; + + spin_lock_irqsave(&hsotg->lock, flags); + dwc2_hcd_stop(hsotg); + spin_unlock_irqrestore(&hsotg->lock, flags); + + usleep_range(1000, 3000); +} + +/* Returns the current frame number */ +static int _dwc2_hcd_get_frame_number(struct usb_hcd *hcd) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + + return dwc2_hcd_get_frame_number(hsotg); +} + +static void dwc2_dump_urb_info(struct usb_hcd *hcd, struct urb *urb, + char *fn_name) +{ +#ifdef VERBOSE_DEBUG + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + char *pipetype; + char *speed; + + dev_vdbg(hsotg->dev, "%s, urb %p\n", fn_name, urb); + dev_vdbg(hsotg->dev, " Device address: %d\n", + usb_pipedevice(urb->pipe)); + dev_vdbg(hsotg->dev, " Endpoint: %d, %s\n", + usb_pipeendpoint(urb->pipe), + usb_pipein(urb->pipe) ? "IN" : "OUT"); + + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + pipetype = "CONTROL"; + break; + case PIPE_BULK: + pipetype = "BULK"; + break; + case PIPE_INTERRUPT: + pipetype = "INTERRUPT"; + break; + case PIPE_ISOCHRONOUS: + pipetype = "ISOCHRONOUS"; + break; + default: + pipetype = "UNKNOWN"; + break; + } + + dev_vdbg(hsotg->dev, " Endpoint type: %s %s (%s)\n", pipetype, + usb_urb_dir_in(urb) ? "IN" : "OUT", usb_pipein(urb->pipe) ? + "IN" : "OUT"); + + switch (urb->dev->speed) { + case USB_SPEED_HIGH: + speed = "HIGH"; + break; + case USB_SPEED_FULL: + speed = "FULL"; + break; + case USB_SPEED_LOW: + speed = "LOW"; + break; + default: + speed = "UNKNOWN"; + break; + } + + dev_vdbg(hsotg->dev, " Speed: %s\n", speed); + dev_vdbg(hsotg->dev, " Max packet size: %d\n", + usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); + dev_vdbg(hsotg->dev, " Data buffer length: %d\n", + urb->transfer_buffer_length); + dev_vdbg(hsotg->dev, " Transfer buffer: %p, Transfer DMA: %08lx\n", + urb->transfer_buffer, (unsigned long)urb->transfer_dma); + dev_vdbg(hsotg->dev, " Setup buffer: %p, Setup DMA: %08lx\n", + urb->setup_packet, (unsigned long)urb->setup_dma); + dev_vdbg(hsotg->dev, " Interval: %d\n", urb->interval); + + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { + int i; + + for (i = 0; i < urb->number_of_packets; i++) { + dev_vdbg(hsotg->dev, " ISO Desc %d:\n", i); + dev_vdbg(hsotg->dev, " offset: %d, length %d\n", + urb->iso_frame_desc[i].offset, + urb->iso_frame_desc[i].length); + } + } +#endif +} + +/* + * Starts processing a USB transfer request specified by a USB Request Block + * (URB). mem_flags indicates the type of memory allocation to use while + * processing this URB. + */ +static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + struct usb_host_endpoint *ep = urb->ep; + struct dwc2_hcd_urb *dwc2_urb; + int i; + int retval; + int alloc_bandwidth = 0; + u8 ep_type = 0; + u32 tflags = 0; + void *buf; + unsigned long flags; + + if (dbg_urb(urb)) { + dev_vdbg(hsotg->dev, "DWC OTG HCD URB Enqueue\n"); + dwc2_dump_urb_info(hcd, urb, "urb_enqueue"); + } + + if (ep == NULL) + return -EINVAL; + + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS || + usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { + spin_lock_irqsave(&hsotg->lock, flags); + if (!dwc2_hcd_is_bandwidth_allocated(hsotg, ep)) + alloc_bandwidth = 1; + spin_unlock_irqrestore(&hsotg->lock, flags); + } + + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + ep_type = USB_ENDPOINT_XFER_CONTROL; + break; + case PIPE_ISOCHRONOUS: + ep_type = USB_ENDPOINT_XFER_ISOC; + break; + case PIPE_BULK: + ep_type = USB_ENDPOINT_XFER_BULK; + break; + case PIPE_INTERRUPT: + ep_type = USB_ENDPOINT_XFER_INT; + break; + default: + dev_warn(hsotg->dev, "Wrong ep type\n"); + } + + dwc2_urb = dwc2_hcd_urb_alloc(hsotg, urb->number_of_packets, + mem_flags); + if (!dwc2_urb) + return -ENOMEM; + + dwc2_hcd_urb_set_pipeinfo(hsotg, dwc2_urb, usb_pipedevice(urb->pipe), + usb_pipeendpoint(urb->pipe), ep_type, + usb_pipein(urb->pipe), + usb_maxpacket(urb->dev, urb->pipe, + !(usb_pipein(urb->pipe)))); + + buf = urb->transfer_buffer; + + if (hcd->self.uses_dma) { + if (!buf && (urb->transfer_dma & 3)) { + dev_err(hsotg->dev, + "%s: unaligned transfer with no transfer_buffer", + __func__); + retval = -EINVAL; + goto fail1; + } + } + + if (!(urb->transfer_flags & URB_NO_INTERRUPT)) + tflags |= URB_GIVEBACK_ASAP; + if (urb->transfer_flags & URB_ZERO_PACKET) + tflags |= URB_SEND_ZERO_PACKET; + + dwc2_urb->priv = urb; + dwc2_urb->buf = buf; + dwc2_urb->dma = urb->transfer_dma; + dwc2_urb->length = urb->transfer_buffer_length; + dwc2_urb->setup_packet = urb->setup_packet; + dwc2_urb->setup_dma = urb->setup_dma; + dwc2_urb->flags = tflags; + dwc2_urb->interval = urb->interval; + dwc2_urb->status = -EINPROGRESS; + + for (i = 0; i < urb->number_of_packets; ++i) + dwc2_hcd_urb_set_iso_desc_params(dwc2_urb, i, + urb->iso_frame_desc[i].offset, + urb->iso_frame_desc[i].length); + + urb->hcpriv = dwc2_urb; + + spin_lock_irqsave(&hsotg->lock, flags); + retval = usb_hcd_link_urb_to_ep(hcd, urb); + spin_unlock_irqrestore(&hsotg->lock, flags); + if (retval) + goto fail1; + + retval = dwc2_hcd_urb_enqueue(hsotg, dwc2_urb, &ep->hcpriv, mem_flags); + if (retval) + goto fail2; + + if (alloc_bandwidth) { + spin_lock_irqsave(&hsotg->lock, flags); + dwc2_allocate_bus_bandwidth(hcd, + dwc2_hcd_get_ep_bandwidth(hsotg, ep), + urb); + spin_unlock_irqrestore(&hsotg->lock, flags); + } + + return 0; + +fail2: + spin_lock_irqsave(&hsotg->lock, flags); + dwc2_urb->priv = NULL; + usb_hcd_unlink_urb_from_ep(hcd, urb); + spin_unlock_irqrestore(&hsotg->lock, flags); +fail1: + urb->hcpriv = NULL; + kfree(dwc2_urb); + + return retval; +} + +/* + * Aborts/cancels a USB transfer request. Always returns 0 to indicate success. + */ +static int _dwc2_hcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, + int status) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + int rc; + unsigned long flags; + + dev_dbg(hsotg->dev, "DWC OTG HCD URB Dequeue\n"); + dwc2_dump_urb_info(hcd, urb, "urb_dequeue"); + + spin_lock_irqsave(&hsotg->lock, flags); + + rc = usb_hcd_check_unlink_urb(hcd, urb, status); + if (rc) + goto out; + + if (!urb->hcpriv) { + dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n"); + goto out; + } + + rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); + + usb_hcd_unlink_urb_from_ep(hcd, urb); + + kfree(urb->hcpriv); + urb->hcpriv = NULL; + + /* Higher layer software sets URB status */ + spin_unlock(&hsotg->lock); + usb_hcd_giveback_urb(hcd, urb, status); + spin_lock(&hsotg->lock); + + dev_dbg(hsotg->dev, "Called usb_hcd_giveback_urb()\n"); + dev_dbg(hsotg->dev, " urb->status = %d\n", urb->status); +out: + spin_unlock_irqrestore(&hsotg->lock, flags); + + return rc; +} + +/* + * Frees resources in the DWC_otg controller related to a given endpoint. Also + * clears state in the HCD related to the endpoint. Any URBs for the endpoint + * must already be dequeued. + */ +static void _dwc2_hcd_endpoint_disable(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + + dev_dbg(hsotg->dev, + "DWC OTG HCD EP DISABLE: bEndpointAddress=0x%02x, ep->hcpriv=%p\n", + ep->desc.bEndpointAddress, ep->hcpriv); + dwc2_hcd_endpoint_disable(hsotg, ep, 250); +} + +/* + * Resets endpoint specific parameter values, in current version used to reset + * the data toggle (as a WA). This function can be called from usb_clear_halt + * routine. + */ +static void _dwc2_hcd_endpoint_reset(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + unsigned long flags; + + dev_dbg(hsotg->dev, + "DWC OTG HCD EP RESET: bEndpointAddress=0x%02x\n", + ep->desc.bEndpointAddress); + + spin_lock_irqsave(&hsotg->lock, flags); + dwc2_hcd_endpoint_reset(hsotg, ep); + spin_unlock_irqrestore(&hsotg->lock, flags); +} + +/* + * Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if + * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid + * interrupt. + * + * This function is called by the USB core when an interrupt occurs + */ +static irqreturn_t _dwc2_hcd_irq(struct usb_hcd *hcd) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + + return dwc2_handle_hcd_intr(hsotg); +} + +/* + * Creates Status Change bitmap for the root hub and root port. The bitmap is + * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 + * is the status change indicator for the single root port. Returns 1 if either + * change indicator is 1, otherwise returns 0. + */ +static int _dwc2_hcd_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + + buf[0] = dwc2_hcd_is_status_changed(hsotg, 1) << 1; + return buf[0] != 0; +} + +/* Handles hub class-specific requests */ +static int _dwc2_hcd_hub_control(struct usb_hcd *hcd, u16 typereq, u16 wvalue, + u16 windex, char *buf, u16 wlength) +{ + int retval = dwc2_hcd_hub_control(dwc2_hcd_to_hsotg(hcd), typereq, + wvalue, windex, buf, wlength); + return retval; +} + +/* Handles hub TT buffer clear completions */ +static void _dwc2_hcd_clear_tt_buffer_complete(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); + struct dwc2_qh *qh; + unsigned long flags; + + qh = ep->hcpriv; + if (!qh) + return; + + spin_lock_irqsave(&hsotg->lock, flags); + qh->tt_buffer_dirty = 0; + + if (hsotg->flags.b.port_connect_status) + dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_ALL); + + spin_unlock_irqrestore(&hsotg->lock, flags); +} + +static struct hc_driver dwc2_hc_driver = { + .description = "dwc2_hsotg", + .product_desc = "DWC OTG Controller", + .hcd_priv_size = sizeof(struct wrapper_priv_data), + + .irq = _dwc2_hcd_irq, + .flags = HCD_MEMORY | HCD_USB2, + + .start = _dwc2_hcd_start, + .stop = _dwc2_hcd_stop, + .urb_enqueue = _dwc2_hcd_urb_enqueue, + .urb_dequeue = _dwc2_hcd_urb_dequeue, + .endpoint_disable = _dwc2_hcd_endpoint_disable, + .endpoint_reset = _dwc2_hcd_endpoint_reset, + .get_frame_number = _dwc2_hcd_get_frame_number, + + .hub_status_data = _dwc2_hcd_hub_status_data, + .hub_control = _dwc2_hcd_hub_control, + .clear_tt_buffer_complete = _dwc2_hcd_clear_tt_buffer_complete, +}; + +/* + * Frees secondary storage associated with the dwc2_hsotg structure contained + * in the struct usb_hcd field + */ +static void dwc2_hcd_free(struct dwc2_hsotg *hsotg) +{ + u32 ahbcfg; + u32 dctl; + int i; + + dev_dbg(hsotg->dev, "DWC OTG HCD FREE\n"); + + /* Free memory for QH/QTD lists */ + dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_inactive); + dwc2_qh_list_free(hsotg, &hsotg->non_periodic_sched_active); + dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_inactive); + dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_ready); + dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_assigned); + dwc2_qh_list_free(hsotg, &hsotg->periodic_sched_queued); + + /* Free memory for the host channels */ + for (i = 0; i < MAX_EPS_CHANNELS; i++) { + struct dwc2_host_chan *chan = hsotg->hc_ptr_array[i]; + + if (chan != NULL) { + dev_dbg(hsotg->dev, "HCD Free channel #%i, chan=%p\n", + i, chan); + hsotg->hc_ptr_array[i] = NULL; + kfree(chan); + } + } + + if (hsotg->core_params->dma_enable > 0) { + if (hsotg->status_buf) { + dma_free_coherent(hsotg->dev, DWC2_HCD_STATUS_BUF_SIZE, + hsotg->status_buf, + hsotg->status_buf_dma); + hsotg->status_buf = NULL; + } + } else { + kfree(hsotg->status_buf); + hsotg->status_buf = NULL; + } + + ahbcfg = readl(hsotg->regs + GAHBCFG); + + /* Disable all interrupts */ + ahbcfg &= ~GAHBCFG_GLBL_INTR_EN; + writel(ahbcfg, hsotg->regs + GAHBCFG); + writel(0, hsotg->regs + GINTMSK); + + if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) { + dctl = readl(hsotg->regs + DCTL); + dctl |= DCTL_SFTDISCON; + writel(dctl, hsotg->regs + DCTL); + } + + if (hsotg->wq_otg) { + if (!cancel_work_sync(&hsotg->wf_otg)) + flush_workqueue(hsotg->wq_otg); + destroy_workqueue(hsotg->wq_otg); + } + + kfree(hsotg->core_params); + hsotg->core_params = NULL; + del_timer(&hsotg->wkp_timer); +} + +static void dwc2_hcd_release(struct dwc2_hsotg *hsotg) +{ + /* Turn off all host-specific interrupts */ + dwc2_disable_host_interrupts(hsotg); + + dwc2_hcd_free(hsotg); +} + +/* + * Sets all parameters to the given value. + * + * Assumes that the dwc2_core_params struct contains only integers. + */ +void dwc2_set_all_params(struct dwc2_core_params *params, int value) +{ + int *p = (int *)params; + size_t size = sizeof(*params) / sizeof(*p); + int i; + + for (i = 0; i < size; i++) + p[i] = value; +} +EXPORT_SYMBOL_GPL(dwc2_set_all_params); + +/* + * Initializes the HCD. This function allocates memory for and initializes the + * static parts of the usb_hcd and dwc2_hsotg structures. It also registers the + * USB bus with the core and calls the hc_driver->start() function. It returns + * a negative error on failure. + */ +int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq, + const struct dwc2_core_params *params) +{ + struct usb_hcd *hcd; + struct dwc2_host_chan *channel; + u32 hcfg; + int i, num_channels; + int retval; + + if (usb_disabled()) + return -ENODEV; + + dev_dbg(hsotg->dev, "DWC OTG HCD INIT\n"); + + /* Detect config values from hardware */ + retval = dwc2_get_hwparams(hsotg); + + if (retval) + return retval; + + retval = -ENOMEM; + + hcfg = readl(hsotg->regs + HCFG); + dev_dbg(hsotg->dev, "hcfg=%08x\n", hcfg); + +#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS + hsotg->frame_num_array = kzalloc(sizeof(*hsotg->frame_num_array) * + FRAME_NUM_ARRAY_SIZE, GFP_KERNEL); + if (!hsotg->frame_num_array) + goto error1; + hsotg->last_frame_num_array = kzalloc( + sizeof(*hsotg->last_frame_num_array) * + FRAME_NUM_ARRAY_SIZE, GFP_KERNEL); + if (!hsotg->last_frame_num_array) + goto error1; + hsotg->last_frame_num = HFNUM_MAX_FRNUM; +#endif + + hsotg->core_params = kzalloc(sizeof(*hsotg->core_params), GFP_KERNEL); + if (!hsotg->core_params) + goto error1; + + dwc2_set_all_params(hsotg->core_params, -1); + + /* Validate parameter values */ + dwc2_set_parameters(hsotg, params); + + /* Check if the bus driver or platform code has setup a dma_mask */ + if (hsotg->core_params->dma_enable > 0 && + hsotg->dev->dma_mask == NULL) { + dev_warn(hsotg->dev, + "dma_mask not set, disabling DMA\n"); + hsotg->core_params->dma_enable = 0; + hsotg->core_params->dma_desc_enable = 0; + } + + /* Set device flags indicating whether the HCD supports DMA */ + if (hsotg->core_params->dma_enable > 0) { + if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0) + dev_warn(hsotg->dev, "can't set DMA mask\n"); + if (dma_set_coherent_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0) + dev_warn(hsotg->dev, "can't set coherent DMA mask\n"); + } + + hcd = usb_create_hcd(&dwc2_hc_driver, hsotg->dev, dev_name(hsotg->dev)); + if (!hcd) + goto error1; + + if (hsotg->core_params->dma_enable <= 0) + hcd->self.uses_dma = 0; + + hcd->has_tt = 1; + + ((struct wrapper_priv_data *) &hcd->hcd_priv)->hsotg = hsotg; + hsotg->priv = hcd; + + /* + * Disable the global interrupt until all the interrupt handlers are + * installed + */ + dwc2_disable_global_interrupts(hsotg); + + /* Initialize the DWC_otg core, and select the Phy type */ + retval = dwc2_core_init(hsotg, true, irq); + if (retval) + goto error2; + + /* Create new workqueue and init work */ + retval = -ENOMEM; + hsotg->wq_otg = create_singlethread_workqueue("dwc2"); + if (!hsotg->wq_otg) { + dev_err(hsotg->dev, "Failed to create workqueue\n"); + goto error2; + } + INIT_WORK(&hsotg->wf_otg, dwc2_conn_id_status_change); + + setup_timer(&hsotg->wkp_timer, dwc2_wakeup_detected, + (unsigned long)hsotg); + + /* Initialize the non-periodic schedule */ + INIT_LIST_HEAD(&hsotg->non_periodic_sched_inactive); + INIT_LIST_HEAD(&hsotg->non_periodic_sched_active); + + /* Initialize the periodic schedule */ + INIT_LIST_HEAD(&hsotg->periodic_sched_inactive); + INIT_LIST_HEAD(&hsotg->periodic_sched_ready); + INIT_LIST_HEAD(&hsotg->periodic_sched_assigned); + INIT_LIST_HEAD(&hsotg->periodic_sched_queued); + + /* + * Create a host channel descriptor for each host channel implemented + * in the controller. Initialize the channel descriptor array. + */ + INIT_LIST_HEAD(&hsotg->free_hc_list); + num_channels = hsotg->core_params->host_channels; + memset(&hsotg->hc_ptr_array[0], 0, sizeof(hsotg->hc_ptr_array)); + + for (i = 0; i < num_channels; i++) { + channel = kzalloc(sizeof(*channel), GFP_KERNEL); + if (channel == NULL) + goto error3; + channel->hc_num = i; + hsotg->hc_ptr_array[i] = channel; + } + + if (hsotg->core_params->uframe_sched > 0) + dwc2_hcd_init_usecs(hsotg); + + /* Initialize hsotg start work */ + INIT_DELAYED_WORK(&hsotg->start_work, dwc2_hcd_start_func); + + /* Initialize port reset work */ + INIT_DELAYED_WORK(&hsotg->reset_work, dwc2_hcd_reset_func); + + /* + * Allocate space for storing data on status transactions. Normally no + * data is sent, but this space acts as a bit bucket. This must be + * done after usb_add_hcd since that function allocates the DMA buffer + * pool. + */ + if (hsotg->core_params->dma_enable > 0) + hsotg->status_buf = dma_alloc_coherent(hsotg->dev, + DWC2_HCD_STATUS_BUF_SIZE, + &hsotg->status_buf_dma, GFP_KERNEL); + else + hsotg->status_buf = kzalloc(DWC2_HCD_STATUS_BUF_SIZE, + GFP_KERNEL); + + if (!hsotg->status_buf) + goto error3; + + hsotg->otg_port = 1; + hsotg->frame_list = NULL; + hsotg->frame_list_dma = 0; + hsotg->periodic_qh_count = 0; + + /* Initiate lx_state to L3 disconnected state */ + hsotg->lx_state = DWC2_L3; + + hcd->self.otg_port = hsotg->otg_port; + + /* Don't support SG list at this point */ + hcd->self.sg_tablesize = 0; + + /* + * Finish generic HCD initialization and start the HCD. This function + * allocates the DMA buffer pool, registers the USB bus, requests the + * IRQ line, and calls hcd_start method. + */ + retval = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (retval < 0) + goto error3; + + device_wakeup_enable(hcd->self.controller); + + dwc2_hcd_dump_state(hsotg); + + dwc2_enable_global_interrupts(hsotg); + + return 0; + +error3: + dwc2_hcd_release(hsotg); +error2: + usb_put_hcd(hcd); +error1: + kfree(hsotg->core_params); + +#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS + kfree(hsotg->last_frame_num_array); + kfree(hsotg->frame_num_array); +#endif + + dev_err(hsotg->dev, "%s() FAILED, returning %d\n", __func__, retval); + return retval; +} +EXPORT_SYMBOL_GPL(dwc2_hcd_init); + +/* + * Removes the HCD. + * Frees memory and resources associated with the HCD and deregisters the bus. + */ +void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) +{ + struct usb_hcd *hcd; + + dev_dbg(hsotg->dev, "DWC OTG HCD REMOVE\n"); + + hcd = dwc2_hsotg_to_hcd(hsotg); + dev_dbg(hsotg->dev, "hsotg->hcd = %p\n", hcd); + + if (!hcd) { + dev_dbg(hsotg->dev, "%s: dwc2_hsotg_to_hcd(hsotg) NULL!\n", + __func__); + return; + } + + usb_remove_hcd(hcd); + hsotg->priv = NULL; + dwc2_hcd_release(hsotg); + usb_put_hcd(hcd); + +#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS + kfree(hsotg->last_frame_num_array); + kfree(hsotg->frame_num_array); +#endif +} +EXPORT_SYMBOL_GPL(dwc2_hcd_remove); diff --git a/kernel/drivers/usb/dwc2/hcd.h b/kernel/drivers/usb/dwc2/hcd.h new file mode 100644 index 000000000..e69a843d8 --- /dev/null +++ b/kernel/drivers/usb/dwc2/hcd.h @@ -0,0 +1,761 @@ +/* + * hcd.h - DesignWare HS OTG Controller host-mode declarations + * + * Copyright (C) 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef __DWC2_HCD_H__ +#define __DWC2_HCD_H__ + +/* + * This file contains the structures, constants, and interfaces for the + * Host Contoller Driver (HCD) + * + * The Host Controller Driver (HCD) is responsible for translating requests + * from the USB Driver into the appropriate actions on the DWC_otg controller. + * It isolates the USBD from the specifics of the controller by providing an + * API to the USBD. + */ + +struct dwc2_qh; + +/** + * struct dwc2_host_chan - Software host channel descriptor + * + * @hc_num: Host channel number, used for register address lookup + * @dev_addr: Address of the device + * @ep_num: Endpoint of the device + * @ep_is_in: Endpoint direction + * @speed: Device speed. One of the following values: + * - USB_SPEED_LOW + * - USB_SPEED_FULL + * - USB_SPEED_HIGH + * @ep_type: Endpoint type. One of the following values: + * - USB_ENDPOINT_XFER_CONTROL: 0 + * - USB_ENDPOINT_XFER_ISOC: 1 + * - USB_ENDPOINT_XFER_BULK: 2 + * - USB_ENDPOINT_XFER_INTR: 3 + * @max_packet: Max packet size in bytes + * @data_pid_start: PID for initial transaction. + * 0: DATA0 + * 1: DATA2 + * 2: DATA1 + * 3: MDATA (non-Control EP), + * SETUP (Control EP) + * @multi_count: Number of additional periodic transactions per + * (micro)frame + * @xfer_buf: Pointer to current transfer buffer position + * @xfer_dma: DMA address of xfer_buf + * @align_buf: In Buffer DMA mode this will be used if xfer_buf is not + * DWORD aligned + * @xfer_len: Total number of bytes to transfer + * @xfer_count: Number of bytes transferred so far + * @start_pkt_count: Packet count at start of transfer + * @xfer_started: True if the transfer has been started + * @ping: True if a PING request should be issued on this channel + * @error_state: True if the error count for this transaction is non-zero + * @halt_on_queue: True if this channel should be halted the next time a + * request is queued for the channel. This is necessary in + * slave mode if no request queue space is available when + * an attempt is made to halt the channel. + * @halt_pending: True if the host channel has been halted, but the core + * is not finished flushing queued requests + * @do_split: Enable split for the channel + * @complete_split: Enable complete split + * @hub_addr: Address of high speed hub for the split + * @hub_port: Port of the low/full speed device for the split + * @xact_pos: Split transaction position. One of the following values: + * - DWC2_HCSPLT_XACTPOS_MID + * - DWC2_HCSPLT_XACTPOS_BEGIN + * - DWC2_HCSPLT_XACTPOS_END + * - DWC2_HCSPLT_XACTPOS_ALL + * @requests: Number of requests issued for this channel since it was + * assigned to the current transfer (not counting PINGs) + * @schinfo: Scheduling micro-frame bitmap + * @ntd: Number of transfer descriptors for the transfer + * @halt_status: Reason for halting the host channel + * @hcint Contents of the HCINT register when the interrupt came + * @qh: QH for the transfer being processed by this channel + * @hc_list_entry: For linking to list of host channels + * @desc_list_addr: Current QH's descriptor list DMA address + * + * This structure represents the state of a single host channel when acting in + * host mode. It contains the data items needed to transfer packets to an + * endpoint via a host channel. + */ +struct dwc2_host_chan { + u8 hc_num; + + unsigned dev_addr:7; + unsigned ep_num:4; + unsigned ep_is_in:1; + unsigned speed:4; + unsigned ep_type:2; + unsigned max_packet:11; + unsigned data_pid_start:2; +#define DWC2_HC_PID_DATA0 TSIZ_SC_MC_PID_DATA0 +#define DWC2_HC_PID_DATA2 TSIZ_SC_MC_PID_DATA2 +#define DWC2_HC_PID_DATA1 TSIZ_SC_MC_PID_DATA1 +#define DWC2_HC_PID_MDATA TSIZ_SC_MC_PID_MDATA +#define DWC2_HC_PID_SETUP TSIZ_SC_MC_PID_SETUP + + unsigned multi_count:2; + + u8 *xfer_buf; + dma_addr_t xfer_dma; + dma_addr_t align_buf; + u32 xfer_len; + u32 xfer_count; + u16 start_pkt_count; + u8 xfer_started; + u8 do_ping; + u8 error_state; + u8 halt_on_queue; + u8 halt_pending; + u8 do_split; + u8 complete_split; + u8 hub_addr; + u8 hub_port; + u8 xact_pos; +#define DWC2_HCSPLT_XACTPOS_MID HCSPLT_XACTPOS_MID +#define DWC2_HCSPLT_XACTPOS_END HCSPLT_XACTPOS_END +#define DWC2_HCSPLT_XACTPOS_BEGIN HCSPLT_XACTPOS_BEGIN +#define DWC2_HCSPLT_XACTPOS_ALL HCSPLT_XACTPOS_ALL + + u8 requests; + u8 schinfo; + u16 ntd; + enum dwc2_halt_status halt_status; + u32 hcint; + struct dwc2_qh *qh; + struct list_head hc_list_entry; + dma_addr_t desc_list_addr; +}; + +struct dwc2_hcd_pipe_info { + u8 dev_addr; + u8 ep_num; + u8 pipe_type; + u8 pipe_dir; + u16 mps; +}; + +struct dwc2_hcd_iso_packet_desc { + u32 offset; + u32 length; + u32 actual_length; + u32 status; +}; + +struct dwc2_qtd; + +struct dwc2_hcd_urb { + void *priv; + struct dwc2_qtd *qtd; + void *buf; + dma_addr_t dma; + void *setup_packet; + dma_addr_t setup_dma; + u32 length; + u32 actual_length; + u32 status; + u32 error_count; + u32 packet_count; + u32 flags; + u16 interval; + struct dwc2_hcd_pipe_info pipe_info; + struct dwc2_hcd_iso_packet_desc iso_descs[0]; +}; + +/* Phases for control transfers */ +enum dwc2_control_phase { + DWC2_CONTROL_SETUP, + DWC2_CONTROL_DATA, + DWC2_CONTROL_STATUS, +}; + +/* Transaction types */ +enum dwc2_transaction_type { + DWC2_TRANSACTION_NONE, + DWC2_TRANSACTION_PERIODIC, + DWC2_TRANSACTION_NON_PERIODIC, + DWC2_TRANSACTION_ALL, +}; + +/** + * struct dwc2_qh - Software queue head structure + * + * @ep_type: Endpoint type. One of the following values: + * - USB_ENDPOINT_XFER_CONTROL + * - USB_ENDPOINT_XFER_BULK + * - USB_ENDPOINT_XFER_INT + * - USB_ENDPOINT_XFER_ISOC + * @ep_is_in: Endpoint direction + * @maxp: Value from wMaxPacketSize field of Endpoint Descriptor + * @dev_speed: Device speed. One of the following values: + * - USB_SPEED_LOW + * - USB_SPEED_FULL + * - USB_SPEED_HIGH + * @data_toggle: Determines the PID of the next data packet for + * non-controltransfers. Ignored for control transfers. + * One of the following values: + * - DWC2_HC_PID_DATA0 + * - DWC2_HC_PID_DATA1 + * @ping_state: Ping state + * @do_split: Full/low speed endpoint on high-speed hub requires split + * @td_first: Index of first activated isochronous transfer descriptor + * @td_last: Index of last activated isochronous transfer descriptor + * @usecs: Bandwidth in microseconds per (micro)frame + * @interval: Interval between transfers in (micro)frames + * @sched_frame: (Micro)frame to initialize a periodic transfer. + * The transfer executes in the following (micro)frame. + * @frame_usecs: Internal variable used by the microframe scheduler + * @start_split_frame: (Micro)frame at which last start split was initialized + * @ntd: Actual number of transfer descriptors in a list + * @dw_align_buf: Used instead of original buffer if its physical address + * is not dword-aligned + * @dw_align_buf_size: Size of dw_align_buf + * @dw_align_buf_dma: DMA address for dw_align_buf + * @qtd_list: List of QTDs for this QH + * @channel: Host channel currently processing transfers for this QH + * @qh_list_entry: Entry for QH in either the periodic or non-periodic + * schedule + * @desc_list: List of transfer descriptors + * @desc_list_dma: Physical address of desc_list + * @n_bytes: Xfer Bytes array. Each element corresponds to a transfer + * descriptor and indicates original XferSize value for the + * descriptor + * @tt_buffer_dirty True if clear_tt_buffer_complete is pending + * + * A Queue Head (QH) holds the static characteristics of an endpoint and + * maintains a list of transfers (QTDs) for that endpoint. A QH structure may + * be entered in either the non-periodic or periodic schedule. + */ +struct dwc2_qh { + u8 ep_type; + u8 ep_is_in; + u16 maxp; + u8 dev_speed; + u8 data_toggle; + u8 ping_state; + u8 do_split; + u8 td_first; + u8 td_last; + u16 usecs; + u16 interval; + u16 sched_frame; + u16 frame_usecs[8]; + u16 start_split_frame; + u16 ntd; + u8 *dw_align_buf; + int dw_align_buf_size; + dma_addr_t dw_align_buf_dma; + struct list_head qtd_list; + struct dwc2_host_chan *channel; + struct list_head qh_list_entry; + struct dwc2_hcd_dma_desc *desc_list; + dma_addr_t desc_list_dma; + u32 *n_bytes; + unsigned tt_buffer_dirty:1; +}; + +/** + * struct dwc2_qtd - Software queue transfer descriptor (QTD) + * + * @control_phase: Current phase for control transfers (Setup, Data, or + * Status) + * @in_process: Indicates if this QTD is currently processed by HW + * @data_toggle: Determines the PID of the next data packet for the + * data phase of control transfers. Ignored for other + * transfer types. One of the following values: + * - DWC2_HC_PID_DATA0 + * - DWC2_HC_PID_DATA1 + * @complete_split: Keeps track of the current split type for FS/LS + * endpoints on a HS Hub + * @isoc_split_pos: Position of the ISOC split in full/low speed + * @isoc_frame_index: Index of the next frame descriptor for an isochronous + * transfer. A frame descriptor describes the buffer + * position and length of the data to be transferred in the + * next scheduled (micro)frame of an isochronous transfer. + * It also holds status for that transaction. The frame + * index starts at 0. + * @isoc_split_offset: Position of the ISOC split in the buffer for the + * current frame + * @ssplit_out_xfer_count: How many bytes transferred during SSPLIT OUT + * @error_count: Holds the number of bus errors that have occurred for + * a transaction within this transfer + * @n_desc: Number of DMA descriptors for this QTD + * @isoc_frame_index_last: Last activated frame (packet) index, used in + * descriptor DMA mode only + * @urb: URB for this transfer + * @qh: Queue head for this QTD + * @qtd_list_entry: For linking to the QH's list of QTDs + * + * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control, + * interrupt, or isochronous transfer. A single QTD is created for each URB + * (of one of these types) submitted to the HCD. The transfer associated with + * a QTD may require one or multiple transactions. + * + * A QTD is linked to a Queue Head, which is entered in either the + * non-periodic or periodic schedule for execution. When a QTD is chosen for + * execution, some or all of its transactions may be executed. After + * execution, the state of the QTD is updated. The QTD may be retired if all + * its transactions are complete or if an error occurred. Otherwise, it + * remains in the schedule so more transactions can be executed later. + */ +struct dwc2_qtd { + enum dwc2_control_phase control_phase; + u8 in_process; + u8 data_toggle; + u8 complete_split; + u8 isoc_split_pos; + u16 isoc_frame_index; + u16 isoc_split_offset; + u32 ssplit_out_xfer_count; + u8 error_count; + u8 n_desc; + u16 isoc_frame_index_last; + struct dwc2_hcd_urb *urb; + struct dwc2_qh *qh; + struct list_head qtd_list_entry; +}; + +#ifdef DEBUG +struct hc_xfer_info { + struct dwc2_hsotg *hsotg; + struct dwc2_host_chan *chan; +}; +#endif + +/* Gets the struct usb_hcd that contains a struct dwc2_hsotg */ +static inline struct usb_hcd *dwc2_hsotg_to_hcd(struct dwc2_hsotg *hsotg) +{ + return (struct usb_hcd *)hsotg->priv; +} + +/* + * Inline used to disable one channel interrupt. Channel interrupts are + * disabled when the channel is halted or released by the interrupt handler. + * There is no need to handle further interrupts of that type until the + * channel is re-assigned. In fact, subsequent handling may cause crashes + * because the channel structures are cleaned up when the channel is released. + */ +static inline void disable_hc_int(struct dwc2_hsotg *hsotg, int chnum, u32 intr) +{ + u32 mask = readl(hsotg->regs + HCINTMSK(chnum)); + + mask &= ~intr; + writel(mask, hsotg->regs + HCINTMSK(chnum)); +} + +/* + * Returns the mode of operation, host or device + */ +static inline int dwc2_is_host_mode(struct dwc2_hsotg *hsotg) +{ + return (readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) != 0; +} +static inline int dwc2_is_device_mode(struct dwc2_hsotg *hsotg) +{ + return (readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) == 0; +} + +/* + * Reads HPRT0 in preparation to modify. It keeps the WC bits 0 so that if they + * are read as 1, they won't clear when written back. + */ +static inline u32 dwc2_read_hprt0(struct dwc2_hsotg *hsotg) +{ + u32 hprt0 = readl(hsotg->regs + HPRT0); + + hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_ENACHG | HPRT0_OVRCURRCHG); + return hprt0; +} + +static inline u8 dwc2_hcd_get_ep_num(struct dwc2_hcd_pipe_info *pipe) +{ + return pipe->ep_num; +} + +static inline u8 dwc2_hcd_get_pipe_type(struct dwc2_hcd_pipe_info *pipe) +{ + return pipe->pipe_type; +} + +static inline u16 dwc2_hcd_get_mps(struct dwc2_hcd_pipe_info *pipe) +{ + return pipe->mps; +} + +static inline u8 dwc2_hcd_get_dev_addr(struct dwc2_hcd_pipe_info *pipe) +{ + return pipe->dev_addr; +} + +static inline u8 dwc2_hcd_is_pipe_isoc(struct dwc2_hcd_pipe_info *pipe) +{ + return pipe->pipe_type == USB_ENDPOINT_XFER_ISOC; +} + +static inline u8 dwc2_hcd_is_pipe_int(struct dwc2_hcd_pipe_info *pipe) +{ + return pipe->pipe_type == USB_ENDPOINT_XFER_INT; +} + +static inline u8 dwc2_hcd_is_pipe_bulk(struct dwc2_hcd_pipe_info *pipe) +{ + return pipe->pipe_type == USB_ENDPOINT_XFER_BULK; +} + +static inline u8 dwc2_hcd_is_pipe_control(struct dwc2_hcd_pipe_info *pipe) +{ + return pipe->pipe_type == USB_ENDPOINT_XFER_CONTROL; +} + +static inline u8 dwc2_hcd_is_pipe_in(struct dwc2_hcd_pipe_info *pipe) +{ + return pipe->pipe_dir == USB_DIR_IN; +} + +static inline u8 dwc2_hcd_is_pipe_out(struct dwc2_hcd_pipe_info *pipe) +{ + return !dwc2_hcd_is_pipe_in(pipe); +} + +extern int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq, + const struct dwc2_core_params *params); +extern void dwc2_hcd_remove(struct dwc2_hsotg *hsotg); +extern void dwc2_set_parameters(struct dwc2_hsotg *hsotg, + const struct dwc2_core_params *params); +extern void dwc2_set_all_params(struct dwc2_core_params *params, int value); +extern int dwc2_get_hwparams(struct dwc2_hsotg *hsotg); + +/* Transaction Execution Functions */ +extern enum dwc2_transaction_type dwc2_hcd_select_transactions( + struct dwc2_hsotg *hsotg); +extern void dwc2_hcd_queue_transactions(struct dwc2_hsotg *hsotg, + enum dwc2_transaction_type tr_type); + +/* Schedule Queue Functions */ +/* Implemented in hcd_queue.c */ +extern void dwc2_hcd_init_usecs(struct dwc2_hsotg *hsotg); +extern void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh); +extern int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh); +extern void dwc2_hcd_qh_unlink(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh); +extern void dwc2_hcd_qh_deactivate(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, + int sched_csplit); + +extern void dwc2_hcd_qtd_init(struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb); +extern int dwc2_hcd_qtd_add(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd, + struct dwc2_qh **qh, gfp_t mem_flags); + +/* Unlinks and frees a QTD */ +static inline void dwc2_hcd_qtd_unlink_and_free(struct dwc2_hsotg *hsotg, + struct dwc2_qtd *qtd, + struct dwc2_qh *qh) +{ + list_del(&qtd->qtd_list_entry); + kfree(qtd); +} + +/* Descriptor DMA support functions */ +extern void dwc2_hcd_start_xfer_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh); +extern void dwc2_hcd_complete_xfer_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + enum dwc2_halt_status halt_status); + +extern int dwc2_hcd_qh_init_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, + gfp_t mem_flags); +extern void dwc2_hcd_qh_free_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh); + +/* Check if QH is non-periodic */ +#define dwc2_qh_is_non_per(_qh_ptr_) \ + ((_qh_ptr_)->ep_type == USB_ENDPOINT_XFER_BULK || \ + (_qh_ptr_)->ep_type == USB_ENDPOINT_XFER_CONTROL) + +#ifdef CONFIG_USB_DWC2_DEBUG_PERIODIC +static inline bool dbg_hc(struct dwc2_host_chan *hc) { return true; } +static inline bool dbg_qh(struct dwc2_qh *qh) { return true; } +static inline bool dbg_urb(struct urb *urb) { return true; } +static inline bool dbg_perio(void) { return true; } +#else /* !CONFIG_USB_DWC2_DEBUG_PERIODIC */ +static inline bool dbg_hc(struct dwc2_host_chan *hc) +{ + return hc->ep_type == USB_ENDPOINT_XFER_BULK || + hc->ep_type == USB_ENDPOINT_XFER_CONTROL; +} + +static inline bool dbg_qh(struct dwc2_qh *qh) +{ + return qh->ep_type == USB_ENDPOINT_XFER_BULK || + qh->ep_type == USB_ENDPOINT_XFER_CONTROL; +} + +static inline bool dbg_urb(struct urb *urb) +{ + return usb_pipetype(urb->pipe) == PIPE_BULK || + usb_pipetype(urb->pipe) == PIPE_CONTROL; +} + +static inline bool dbg_perio(void) { return false; } +#endif + +/* High bandwidth multiplier as encoded in highspeed endpoint descriptors */ +#define dwc2_hb_mult(wmaxpacketsize) (1 + (((wmaxpacketsize) >> 11) & 0x03)) + +/* Packet size for any kind of endpoint descriptor */ +#define dwc2_max_packet(wmaxpacketsize) ((wmaxpacketsize) & 0x07ff) + +/* + * Returns true if frame1 is less than or equal to frame2. The comparison is + * done modulo HFNUM_MAX_FRNUM. This accounts for the rollover of the + * frame number when the max frame number is reached. + */ +static inline int dwc2_frame_num_le(u16 frame1, u16 frame2) +{ + return ((frame2 - frame1) & HFNUM_MAX_FRNUM) <= (HFNUM_MAX_FRNUM >> 1); +} + +/* + * Returns true if frame1 is greater than frame2. The comparison is done + * modulo HFNUM_MAX_FRNUM. This accounts for the rollover of the frame + * number when the max frame number is reached. + */ +static inline int dwc2_frame_num_gt(u16 frame1, u16 frame2) +{ + return (frame1 != frame2) && + ((frame1 - frame2) & HFNUM_MAX_FRNUM) < (HFNUM_MAX_FRNUM >> 1); +} + +/* + * Increments frame by the amount specified by inc. The addition is done + * modulo HFNUM_MAX_FRNUM. Returns the incremented value. + */ +static inline u16 dwc2_frame_num_inc(u16 frame, u16 inc) +{ + return (frame + inc) & HFNUM_MAX_FRNUM; +} + +static inline u16 dwc2_full_frame_num(u16 frame) +{ + return (frame & HFNUM_MAX_FRNUM) >> 3; +} + +static inline u16 dwc2_micro_frame_num(u16 frame) +{ + return frame & 0x7; +} + +/* + * Returns the Core Interrupt Status register contents, ANDed with the Core + * Interrupt Mask register contents + */ +static inline u32 dwc2_read_core_intr(struct dwc2_hsotg *hsotg) +{ + return readl(hsotg->regs + GINTSTS) & readl(hsotg->regs + GINTMSK); +} + +static inline u32 dwc2_hcd_urb_get_status(struct dwc2_hcd_urb *dwc2_urb) +{ + return dwc2_urb->status; +} + +static inline u32 dwc2_hcd_urb_get_actual_length( + struct dwc2_hcd_urb *dwc2_urb) +{ + return dwc2_urb->actual_length; +} + +static inline u32 dwc2_hcd_urb_get_error_count(struct dwc2_hcd_urb *dwc2_urb) +{ + return dwc2_urb->error_count; +} + +static inline void dwc2_hcd_urb_set_iso_desc_params( + struct dwc2_hcd_urb *dwc2_urb, int desc_num, u32 offset, + u32 length) +{ + dwc2_urb->iso_descs[desc_num].offset = offset; + dwc2_urb->iso_descs[desc_num].length = length; +} + +static inline u32 dwc2_hcd_urb_get_iso_desc_status( + struct dwc2_hcd_urb *dwc2_urb, int desc_num) +{ + return dwc2_urb->iso_descs[desc_num].status; +} + +static inline u32 dwc2_hcd_urb_get_iso_desc_actual_length( + struct dwc2_hcd_urb *dwc2_urb, int desc_num) +{ + return dwc2_urb->iso_descs[desc_num].actual_length; +} + +static inline int dwc2_hcd_is_bandwidth_allocated(struct dwc2_hsotg *hsotg, + struct usb_host_endpoint *ep) +{ + struct dwc2_qh *qh = ep->hcpriv; + + if (qh && !list_empty(&qh->qh_list_entry)) + return 1; + + return 0; +} + +static inline u16 dwc2_hcd_get_ep_bandwidth(struct dwc2_hsotg *hsotg, + struct usb_host_endpoint *ep) +{ + struct dwc2_qh *qh = ep->hcpriv; + + if (!qh) { + WARN_ON(1); + return 0; + } + + return qh->usecs; +} + +extern void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd); + +/* HCD Core API */ + +/** + * dwc2_handle_hcd_intr() - Called on every hardware interrupt + * + * @hsotg: The DWC2 HCD + * + * Returns IRQ_HANDLED if interrupt is handled + * Return IRQ_NONE if interrupt is not handled + */ +extern irqreturn_t dwc2_handle_hcd_intr(struct dwc2_hsotg *hsotg); + +/** + * dwc2_hcd_stop() - Halts the DWC_otg host mode operation + * + * @hsotg: The DWC2 HCD + */ +extern void dwc2_hcd_stop(struct dwc2_hsotg *hsotg); + +/** + * dwc2_hcd_is_b_host() - Returns 1 if core currently is acting as B host, + * and 0 otherwise + * + * @hsotg: The DWC2 HCD + */ +extern int dwc2_hcd_is_b_host(struct dwc2_hsotg *hsotg); + +/** + * dwc2_hcd_dump_state() - Dumps hsotg state + * + * @hsotg: The DWC2 HCD + * + * NOTE: This function will be removed once the peripheral controller code + * is integrated and the driver is stable + */ +extern void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg); + +/** + * dwc2_hcd_dump_frrem() - Dumps the average frame remaining at SOF + * + * @hsotg: The DWC2 HCD + * + * This can be used to determine average interrupt latency. Frame remaining is + * also shown for start transfer and two additional sample points. + * + * NOTE: This function will be removed once the peripheral controller code + * is integrated and the driver is stable + */ +extern void dwc2_hcd_dump_frrem(struct dwc2_hsotg *hsotg); + +/* URB interface */ + +/* Transfer flags */ +#define URB_GIVEBACK_ASAP 0x1 +#define URB_SEND_ZERO_PACKET 0x2 + +/* Host driver callbacks */ + +extern void dwc2_host_start(struct dwc2_hsotg *hsotg); +extern void dwc2_host_disconnect(struct dwc2_hsotg *hsotg); +extern void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context, + int *hub_addr, int *hub_port); +extern int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context); +extern void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd, + int status); + +#ifdef DEBUG +/* + * Macro to sample the remaining PHY clocks left in the current frame. This + * may be used during debugging to determine the average time it takes to + * execute sections of code. There are two possible sample points, "a" and + * "b", so the _letter_ argument must be one of these values. + * + * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For + * example, "cat /sys/devices/lm0/hcd_frrem". + */ +#define dwc2_sample_frrem(_hcd_, _qh_, _letter_) \ +do { \ + struct hfnum_data _hfnum_; \ + struct dwc2_qtd *_qtd_; \ + \ + _qtd_ = list_entry((_qh_)->qtd_list.next, struct dwc2_qtd, \ + qtd_list_entry); \ + if (usb_pipeint(_qtd_->urb->pipe) && \ + (_qh_)->start_split_frame != 0 && !_qtd_->complete_split) { \ + _hfnum_.d32 = readl((_hcd_)->regs + HFNUM); \ + switch (_hfnum_.b.frnum & 0x7) { \ + case 7: \ + (_hcd_)->hfnum_7_samples_##_letter_++; \ + (_hcd_)->hfnum_7_frrem_accum_##_letter_ += \ + _hfnum_.b.frrem; \ + break; \ + case 0: \ + (_hcd_)->hfnum_0_samples_##_letter_++; \ + (_hcd_)->hfnum_0_frrem_accum_##_letter_ += \ + _hfnum_.b.frrem; \ + break; \ + default: \ + (_hcd_)->hfnum_other_samples_##_letter_++; \ + (_hcd_)->hfnum_other_frrem_accum_##_letter_ += \ + _hfnum_.b.frrem; \ + break; \ + } \ + } \ +} while (0) +#else +#define dwc2_sample_frrem(_hcd_, _qh_, _letter_) do {} while (0) +#endif + +#endif /* __DWC2_HCD_H__ */ diff --git a/kernel/drivers/usb/dwc2/hcd_ddma.c b/kernel/drivers/usb/dwc2/hcd_ddma.c new file mode 100644 index 000000000..3376177e4 --- /dev/null +++ b/kernel/drivers/usb/dwc2/hcd_ddma.c @@ -0,0 +1,1212 @@ +/* + * hcd_ddma.c - DesignWare HS OTG Controller descriptor DMA routines + * + * Copyright (C) 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * This file contains the Descriptor DMA implementation for Host mode + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/usb.h> + +#include <linux/usb/hcd.h> +#include <linux/usb/ch11.h> + +#include "core.h" +#include "hcd.h" + +static u16 dwc2_frame_list_idx(u16 frame) +{ + return frame & (FRLISTEN_64_SIZE - 1); +} + +static u16 dwc2_desclist_idx_inc(u16 idx, u16 inc, u8 speed) +{ + return (idx + inc) & + ((speed == USB_SPEED_HIGH ? MAX_DMA_DESC_NUM_HS_ISOC : + MAX_DMA_DESC_NUM_GENERIC) - 1); +} + +static u16 dwc2_desclist_idx_dec(u16 idx, u16 inc, u8 speed) +{ + return (idx - inc) & + ((speed == USB_SPEED_HIGH ? MAX_DMA_DESC_NUM_HS_ISOC : + MAX_DMA_DESC_NUM_GENERIC) - 1); +} + +static u16 dwc2_max_desc_num(struct dwc2_qh *qh) +{ + return (qh->ep_type == USB_ENDPOINT_XFER_ISOC && + qh->dev_speed == USB_SPEED_HIGH) ? + MAX_DMA_DESC_NUM_HS_ISOC : MAX_DMA_DESC_NUM_GENERIC; +} + +static u16 dwc2_frame_incr_val(struct dwc2_qh *qh) +{ + return qh->dev_speed == USB_SPEED_HIGH ? + (qh->interval + 8 - 1) / 8 : qh->interval; +} + +static int dwc2_desc_list_alloc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, + gfp_t flags) +{ + qh->desc_list = dma_alloc_coherent(hsotg->dev, + sizeof(struct dwc2_hcd_dma_desc) * + dwc2_max_desc_num(qh), &qh->desc_list_dma, + flags); + + if (!qh->desc_list) + return -ENOMEM; + + memset(qh->desc_list, 0, + sizeof(struct dwc2_hcd_dma_desc) * dwc2_max_desc_num(qh)); + + qh->n_bytes = kzalloc(sizeof(u32) * dwc2_max_desc_num(qh), flags); + if (!qh->n_bytes) { + dma_free_coherent(hsotg->dev, sizeof(struct dwc2_hcd_dma_desc) + * dwc2_max_desc_num(qh), qh->desc_list, + qh->desc_list_dma); + qh->desc_list = NULL; + return -ENOMEM; + } + + return 0; +} + +static void dwc2_desc_list_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + if (qh->desc_list) { + dma_free_coherent(hsotg->dev, sizeof(struct dwc2_hcd_dma_desc) + * dwc2_max_desc_num(qh), qh->desc_list, + qh->desc_list_dma); + qh->desc_list = NULL; + } + + kfree(qh->n_bytes); + qh->n_bytes = NULL; +} + +static int dwc2_frame_list_alloc(struct dwc2_hsotg *hsotg, gfp_t mem_flags) +{ + if (hsotg->frame_list) + return 0; + + hsotg->frame_list = dma_alloc_coherent(hsotg->dev, + 4 * FRLISTEN_64_SIZE, + &hsotg->frame_list_dma, + mem_flags); + if (!hsotg->frame_list) + return -ENOMEM; + + memset(hsotg->frame_list, 0, 4 * FRLISTEN_64_SIZE); + return 0; +} + +static void dwc2_frame_list_free(struct dwc2_hsotg *hsotg) +{ + u32 *frame_list; + dma_addr_t frame_list_dma; + unsigned long flags; + + spin_lock_irqsave(&hsotg->lock, flags); + + if (!hsotg->frame_list) { + spin_unlock_irqrestore(&hsotg->lock, flags); + return; + } + + frame_list = hsotg->frame_list; + frame_list_dma = hsotg->frame_list_dma; + hsotg->frame_list = NULL; + + spin_unlock_irqrestore(&hsotg->lock, flags); + + dma_free_coherent(hsotg->dev, 4 * FRLISTEN_64_SIZE, frame_list, + frame_list_dma); +} + +static void dwc2_per_sched_enable(struct dwc2_hsotg *hsotg, u32 fr_list_en) +{ + u32 hcfg; + unsigned long flags; + + spin_lock_irqsave(&hsotg->lock, flags); + + hcfg = readl(hsotg->regs + HCFG); + if (hcfg & HCFG_PERSCHEDENA) { + /* already enabled */ + spin_unlock_irqrestore(&hsotg->lock, flags); + return; + } + + writel(hsotg->frame_list_dma, hsotg->regs + HFLBADDR); + + hcfg &= ~HCFG_FRLISTEN_MASK; + hcfg |= fr_list_en | HCFG_PERSCHEDENA; + dev_vdbg(hsotg->dev, "Enabling Periodic schedule\n"); + writel(hcfg, hsotg->regs + HCFG); + + spin_unlock_irqrestore(&hsotg->lock, flags); +} + +static void dwc2_per_sched_disable(struct dwc2_hsotg *hsotg) +{ + u32 hcfg; + unsigned long flags; + + spin_lock_irqsave(&hsotg->lock, flags); + + hcfg = readl(hsotg->regs + HCFG); + if (!(hcfg & HCFG_PERSCHEDENA)) { + /* already disabled */ + spin_unlock_irqrestore(&hsotg->lock, flags); + return; + } + + hcfg &= ~HCFG_PERSCHEDENA; + dev_vdbg(hsotg->dev, "Disabling Periodic schedule\n"); + writel(hcfg, hsotg->regs + HCFG); + + spin_unlock_irqrestore(&hsotg->lock, flags); +} + +/* + * Activates/Deactivates FrameList entries for the channel based on endpoint + * servicing period + */ +static void dwc2_update_frame_list(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, + int enable) +{ + struct dwc2_host_chan *chan; + u16 i, j, inc; + + if (!hsotg) { + pr_err("hsotg = %p\n", hsotg); + return; + } + + if (!qh->channel) { + dev_err(hsotg->dev, "qh->channel = %p\n", qh->channel); + return; + } + + if (!hsotg->frame_list) { + dev_err(hsotg->dev, "hsotg->frame_list = %p\n", + hsotg->frame_list); + return; + } + + chan = qh->channel; + inc = dwc2_frame_incr_val(qh); + if (qh->ep_type == USB_ENDPOINT_XFER_ISOC) + i = dwc2_frame_list_idx(qh->sched_frame); + else + i = 0; + + j = i; + do { + if (enable) + hsotg->frame_list[j] |= 1 << chan->hc_num; + else + hsotg->frame_list[j] &= ~(1 << chan->hc_num); + j = (j + inc) & (FRLISTEN_64_SIZE - 1); + } while (j != i); + + if (!enable) + return; + + chan->schinfo = 0; + if (chan->speed == USB_SPEED_HIGH && qh->interval) { + j = 1; + /* TODO - check this */ + inc = (8 + qh->interval - 1) / qh->interval; + for (i = 0; i < inc; i++) { + chan->schinfo |= j; + j = j << qh->interval; + } + } else { + chan->schinfo = 0xff; + } +} + +static void dwc2_release_channel_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh) +{ + struct dwc2_host_chan *chan = qh->channel; + + if (dwc2_qh_is_non_per(qh)) { + if (hsotg->core_params->uframe_sched > 0) + hsotg->available_host_channels++; + else + hsotg->non_periodic_channels--; + } else { + dwc2_update_frame_list(hsotg, qh, 0); + } + + /* + * The condition is added to prevent double cleanup try in case of + * device disconnect. See channel cleanup in dwc2_hcd_disconnect(). + */ + if (chan->qh) { + if (!list_empty(&chan->hc_list_entry)) + list_del(&chan->hc_list_entry); + dwc2_hc_cleanup(hsotg, chan); + list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list); + chan->qh = NULL; + } + + qh->channel = NULL; + qh->ntd = 0; + + if (qh->desc_list) + memset(qh->desc_list, 0, sizeof(struct dwc2_hcd_dma_desc) * + dwc2_max_desc_num(qh)); +} + +/** + * dwc2_hcd_qh_init_ddma() - Initializes a QH structure's Descriptor DMA + * related members + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: The QH to init + * + * Return: 0 if successful, negative error code otherwise + * + * Allocates memory for the descriptor list. For the first periodic QH, + * allocates memory for the FrameList and enables periodic scheduling. + */ +int dwc2_hcd_qh_init_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, + gfp_t mem_flags) +{ + int retval; + + if (qh->do_split) { + dev_err(hsotg->dev, + "SPLIT Transfers are not supported in Descriptor DMA mode.\n"); + retval = -EINVAL; + goto err0; + } + + retval = dwc2_desc_list_alloc(hsotg, qh, mem_flags); + if (retval) + goto err0; + + if (qh->ep_type == USB_ENDPOINT_XFER_ISOC || + qh->ep_type == USB_ENDPOINT_XFER_INT) { + if (!hsotg->frame_list) { + retval = dwc2_frame_list_alloc(hsotg, mem_flags); + if (retval) + goto err1; + /* Enable periodic schedule on first periodic QH */ + dwc2_per_sched_enable(hsotg, HCFG_FRLISTEN_64); + } + } + + qh->ntd = 0; + return 0; + +err1: + dwc2_desc_list_free(hsotg, qh); +err0: + return retval; +} + +/** + * dwc2_hcd_qh_free_ddma() - Frees a QH structure's Descriptor DMA related + * members + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: The QH to free + * + * Frees descriptor list memory associated with the QH. If QH is periodic and + * the last, frees FrameList memory and disables periodic scheduling. + */ +void dwc2_hcd_qh_free_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + dwc2_desc_list_free(hsotg, qh); + + /* + * Channel still assigned due to some reasons. + * Seen on Isoc URB dequeue. Channel halted but no subsequent + * ChHalted interrupt to release the channel. Afterwards + * when it comes here from endpoint disable routine + * channel remains assigned. + */ + if (qh->channel) + dwc2_release_channel_ddma(hsotg, qh); + + if ((qh->ep_type == USB_ENDPOINT_XFER_ISOC || + qh->ep_type == USB_ENDPOINT_XFER_INT) && + (hsotg->core_params->uframe_sched > 0 || + !hsotg->periodic_channels) && hsotg->frame_list) { + dwc2_per_sched_disable(hsotg); + dwc2_frame_list_free(hsotg); + } +} + +static u8 dwc2_frame_to_desc_idx(struct dwc2_qh *qh, u16 frame_idx) +{ + if (qh->dev_speed == USB_SPEED_HIGH) + /* Descriptor set (8 descriptors) index which is 8-aligned */ + return (frame_idx & ((MAX_DMA_DESC_NUM_HS_ISOC / 8) - 1)) * 8; + else + return frame_idx & (MAX_DMA_DESC_NUM_GENERIC - 1); +} + +/* + * Determine starting frame for Isochronous transfer. + * Few frames skipped to prevent race condition with HC. + */ +static u16 dwc2_calc_starting_frame(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh, u16 *skip_frames) +{ + u16 frame; + + hsotg->frame_number = dwc2_hcd_get_frame_number(hsotg); + + /* sched_frame is always frame number (not uFrame) both in FS and HS! */ + + /* + * skip_frames is used to limit activated descriptors number + * to avoid the situation when HC services the last activated + * descriptor firstly. + * Example for FS: + * Current frame is 1, scheduled frame is 3. Since HC always fetches + * the descriptor corresponding to curr_frame+1, the descriptor + * corresponding to frame 2 will be fetched. If the number of + * descriptors is max=64 (or greather) the list will be fully programmed + * with Active descriptors and it is possible case (rare) that the + * latest descriptor(considering rollback) corresponding to frame 2 will + * be serviced first. HS case is more probable because, in fact, up to + * 11 uframes (16 in the code) may be skipped. + */ + if (qh->dev_speed == USB_SPEED_HIGH) { + /* + * Consider uframe counter also, to start xfer asap. If half of + * the frame elapsed skip 2 frames otherwise just 1 frame. + * Starting descriptor index must be 8-aligned, so if the + * current frame is near to complete the next one is skipped as + * well. + */ + if (dwc2_micro_frame_num(hsotg->frame_number) >= 5) { + *skip_frames = 2 * 8; + frame = dwc2_frame_num_inc(hsotg->frame_number, + *skip_frames); + } else { + *skip_frames = 1 * 8; + frame = dwc2_frame_num_inc(hsotg->frame_number, + *skip_frames); + } + + frame = dwc2_full_frame_num(frame); + } else { + /* + * Two frames are skipped for FS - the current and the next. + * But for descriptor programming, 1 frame (descriptor) is + * enough, see example above. + */ + *skip_frames = 1; + frame = dwc2_frame_num_inc(hsotg->frame_number, 2); + } + + return frame; +} + +/* + * Calculate initial descriptor index for isochronous transfer based on + * scheduled frame + */ +static u16 dwc2_recalc_initial_desc_idx(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh) +{ + u16 frame, fr_idx, fr_idx_tmp, skip_frames; + + /* + * With current ISOC processing algorithm the channel is being released + * when no more QTDs in the list (qh->ntd == 0). Thus this function is + * called only when qh->ntd == 0 and qh->channel == 0. + * + * So qh->channel != NULL branch is not used and just not removed from + * the source file. It is required for another possible approach which + * is, do not disable and release the channel when ISOC session + * completed, just move QH to inactive schedule until new QTD arrives. + * On new QTD, the QH moved back to 'ready' schedule, starting frame and + * therefore starting desc_index are recalculated. In this case channel + * is released only on ep_disable. + */ + + /* + * Calculate starting descriptor index. For INTERRUPT endpoint it is + * always 0. + */ + if (qh->channel) { + frame = dwc2_calc_starting_frame(hsotg, qh, &skip_frames); + /* + * Calculate initial descriptor index based on FrameList current + * bitmap and servicing period + */ + fr_idx_tmp = dwc2_frame_list_idx(frame); + fr_idx = (FRLISTEN_64_SIZE + + dwc2_frame_list_idx(qh->sched_frame) - fr_idx_tmp) + % dwc2_frame_incr_val(qh); + fr_idx = (fr_idx + fr_idx_tmp) % FRLISTEN_64_SIZE; + } else { + qh->sched_frame = dwc2_calc_starting_frame(hsotg, qh, + &skip_frames); + fr_idx = dwc2_frame_list_idx(qh->sched_frame); + } + + qh->td_first = qh->td_last = dwc2_frame_to_desc_idx(qh, fr_idx); + + return skip_frames; +} + +#define ISOC_URB_GIVEBACK_ASAP + +#define MAX_ISOC_XFER_SIZE_FS 1023 +#define MAX_ISOC_XFER_SIZE_HS 3072 +#define DESCNUM_THRESHOLD 4 + +static void dwc2_fill_host_isoc_dma_desc(struct dwc2_hsotg *hsotg, + struct dwc2_qtd *qtd, + struct dwc2_qh *qh, u32 max_xfer_size, + u16 idx) +{ + struct dwc2_hcd_dma_desc *dma_desc = &qh->desc_list[idx]; + struct dwc2_hcd_iso_packet_desc *frame_desc; + + memset(dma_desc, 0, sizeof(*dma_desc)); + frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index_last]; + + if (frame_desc->length > max_xfer_size) + qh->n_bytes[idx] = max_xfer_size; + else + qh->n_bytes[idx] = frame_desc->length; + + dma_desc->buf = (u32)(qtd->urb->dma + frame_desc->offset); + dma_desc->status = qh->n_bytes[idx] << HOST_DMA_ISOC_NBYTES_SHIFT & + HOST_DMA_ISOC_NBYTES_MASK; + +#ifdef ISOC_URB_GIVEBACK_ASAP + /* Set IOC for each descriptor corresponding to last frame of URB */ + if (qtd->isoc_frame_index_last == qtd->urb->packet_count) + dma_desc->status |= HOST_DMA_IOC; +#endif + + qh->ntd++; + qtd->isoc_frame_index_last++; +} + +static void dwc2_init_isoc_dma_desc(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh, u16 skip_frames) +{ + struct dwc2_qtd *qtd; + u32 max_xfer_size; + u16 idx, inc, n_desc, ntd_max = 0; + + idx = qh->td_last; + inc = qh->interval; + n_desc = 0; + + if (qh->interval) { + ntd_max = (dwc2_max_desc_num(qh) + qh->interval - 1) / + qh->interval; + if (skip_frames && !qh->channel) + ntd_max -= skip_frames / qh->interval; + } + + max_xfer_size = qh->dev_speed == USB_SPEED_HIGH ? + MAX_ISOC_XFER_SIZE_HS : MAX_ISOC_XFER_SIZE_FS; + + list_for_each_entry(qtd, &qh->qtd_list, qtd_list_entry) { + while (qh->ntd < ntd_max && qtd->isoc_frame_index_last < + qtd->urb->packet_count) { + if (n_desc > 1) + qh->desc_list[n_desc - 1].status |= HOST_DMA_A; + dwc2_fill_host_isoc_dma_desc(hsotg, qtd, qh, + max_xfer_size, idx); + idx = dwc2_desclist_idx_inc(idx, inc, qh->dev_speed); + n_desc++; + } + qtd->in_process = 1; + } + + qh->td_last = idx; + +#ifdef ISOC_URB_GIVEBACK_ASAP + /* Set IOC for last descriptor if descriptor list is full */ + if (qh->ntd == ntd_max) { + idx = dwc2_desclist_idx_dec(qh->td_last, inc, qh->dev_speed); + qh->desc_list[idx].status |= HOST_DMA_IOC; + } +#else + /* + * Set IOC bit only for one descriptor. Always try to be ahead of HW + * processing, i.e. on IOC generation driver activates next descriptor + * but core continues to process descriptors following the one with IOC + * set. + */ + + if (n_desc > DESCNUM_THRESHOLD) + /* + * Move IOC "up". Required even if there is only one QTD + * in the list, because QTDs might continue to be queued, + * but during the activation it was only one queued. + * Actually more than one QTD might be in the list if this + * function called from XferCompletion - QTDs was queued during + * HW processing of the previous descriptor chunk. + */ + idx = dwc2_desclist_idx_dec(idx, inc * ((qh->ntd + 1) / 2), + qh->dev_speed); + else + /* + * Set the IOC for the latest descriptor if either number of + * descriptors is not greater than threshold or no more new + * descriptors activated + */ + idx = dwc2_desclist_idx_dec(qh->td_last, inc, qh->dev_speed); + + qh->desc_list[idx].status |= HOST_DMA_IOC; +#endif + + if (n_desc) { + qh->desc_list[n_desc - 1].status |= HOST_DMA_A; + if (n_desc > 1) + qh->desc_list[0].status |= HOST_DMA_A; + } +} + +static void dwc2_fill_host_dma_desc(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + struct dwc2_qtd *qtd, struct dwc2_qh *qh, + int n_desc) +{ + struct dwc2_hcd_dma_desc *dma_desc = &qh->desc_list[n_desc]; + int len = chan->xfer_len; + + if (len > MAX_DMA_DESC_SIZE - (chan->max_packet - 1)) + len = MAX_DMA_DESC_SIZE - (chan->max_packet - 1); + + if (chan->ep_is_in) { + int num_packets; + + if (len > 0 && chan->max_packet) + num_packets = (len + chan->max_packet - 1) + / chan->max_packet; + else + /* Need 1 packet for transfer length of 0 */ + num_packets = 1; + + /* Always program an integral # of packets for IN transfers */ + len = num_packets * chan->max_packet; + } + + dma_desc->status = len << HOST_DMA_NBYTES_SHIFT & HOST_DMA_NBYTES_MASK; + qh->n_bytes[n_desc] = len; + + if (qh->ep_type == USB_ENDPOINT_XFER_CONTROL && + qtd->control_phase == DWC2_CONTROL_SETUP) + dma_desc->status |= HOST_DMA_SUP; + + dma_desc->buf = (u32)chan->xfer_dma; + + /* + * Last (or only) descriptor of IN transfer with actual size less + * than MaxPacket + */ + if (len > chan->xfer_len) { + chan->xfer_len = 0; + } else { + chan->xfer_dma += len; + chan->xfer_len -= len; + } +} + +static void dwc2_init_non_isoc_dma_desc(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh) +{ + struct dwc2_qtd *qtd; + struct dwc2_host_chan *chan = qh->channel; + int n_desc = 0; + + dev_vdbg(hsotg->dev, "%s(): qh=%p dma=%08lx len=%d\n", __func__, qh, + (unsigned long)chan->xfer_dma, chan->xfer_len); + + /* + * Start with chan->xfer_dma initialized in assign_and_init_hc(), then + * if SG transfer consists of multiple URBs, this pointer is re-assigned + * to the buffer of the currently processed QTD. For non-SG request + * there is always one QTD active. + */ + + list_for_each_entry(qtd, &qh->qtd_list, qtd_list_entry) { + dev_vdbg(hsotg->dev, "qtd=%p\n", qtd); + + if (n_desc) { + /* SG request - more than 1 QTD */ + chan->xfer_dma = qtd->urb->dma + + qtd->urb->actual_length; + chan->xfer_len = qtd->urb->length - + qtd->urb->actual_length; + dev_vdbg(hsotg->dev, "buf=%08lx len=%d\n", + (unsigned long)chan->xfer_dma, chan->xfer_len); + } + + qtd->n_desc = 0; + do { + if (n_desc > 1) { + qh->desc_list[n_desc - 1].status |= HOST_DMA_A; + dev_vdbg(hsotg->dev, + "set A bit in desc %d (%p)\n", + n_desc - 1, + &qh->desc_list[n_desc - 1]); + } + dwc2_fill_host_dma_desc(hsotg, chan, qtd, qh, n_desc); + dev_vdbg(hsotg->dev, + "desc %d (%p) buf=%08x status=%08x\n", + n_desc, &qh->desc_list[n_desc], + qh->desc_list[n_desc].buf, + qh->desc_list[n_desc].status); + qtd->n_desc++; + n_desc++; + } while (chan->xfer_len > 0 && + n_desc != MAX_DMA_DESC_NUM_GENERIC); + + dev_vdbg(hsotg->dev, "n_desc=%d\n", n_desc); + qtd->in_process = 1; + if (qh->ep_type == USB_ENDPOINT_XFER_CONTROL) + break; + if (n_desc == MAX_DMA_DESC_NUM_GENERIC) + break; + } + + if (n_desc) { + qh->desc_list[n_desc - 1].status |= + HOST_DMA_IOC | HOST_DMA_EOL | HOST_DMA_A; + dev_vdbg(hsotg->dev, "set IOC/EOL/A bits in desc %d (%p)\n", + n_desc - 1, &qh->desc_list[n_desc - 1]); + if (n_desc > 1) { + qh->desc_list[0].status |= HOST_DMA_A; + dev_vdbg(hsotg->dev, "set A bit in desc 0 (%p)\n", + &qh->desc_list[0]); + } + chan->ntd = n_desc; + } +} + +/** + * dwc2_hcd_start_xfer_ddma() - Starts a transfer in Descriptor DMA mode + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: The QH to init + * + * Return: 0 if successful, negative error code otherwise + * + * For Control and Bulk endpoints, initializes descriptor list and starts the + * transfer. For Interrupt and Isochronous endpoints, initializes descriptor + * list then updates FrameList, marking appropriate entries as active. + * + * For Isochronous endpoints the starting descriptor index is calculated based + * on the scheduled frame, but only on the first transfer descriptor within a + * session. Then the transfer is started via enabling the channel. + * + * For Isochronous endpoints the channel is not halted on XferComplete + * interrupt so remains assigned to the endpoint(QH) until session is done. + */ +void dwc2_hcd_start_xfer_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + /* Channel is already assigned */ + struct dwc2_host_chan *chan = qh->channel; + u16 skip_frames = 0; + + switch (chan->ep_type) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + dwc2_init_non_isoc_dma_desc(hsotg, qh); + dwc2_hc_start_transfer_ddma(hsotg, chan); + break; + case USB_ENDPOINT_XFER_INT: + dwc2_init_non_isoc_dma_desc(hsotg, qh); + dwc2_update_frame_list(hsotg, qh, 1); + dwc2_hc_start_transfer_ddma(hsotg, chan); + break; + case USB_ENDPOINT_XFER_ISOC: + if (!qh->ntd) + skip_frames = dwc2_recalc_initial_desc_idx(hsotg, qh); + dwc2_init_isoc_dma_desc(hsotg, qh, skip_frames); + + if (!chan->xfer_started) { + dwc2_update_frame_list(hsotg, qh, 1); + + /* + * Always set to max, instead of actual size. Otherwise + * ntd will be changed with channel being enabled. Not + * recommended. + */ + chan->ntd = dwc2_max_desc_num(qh); + + /* Enable channel only once for ISOC */ + dwc2_hc_start_transfer_ddma(hsotg, chan); + } + + break; + default: + break; + } +} + +#define DWC2_CMPL_DONE 1 +#define DWC2_CMPL_STOP 2 + +static int dwc2_cmpl_host_isoc_dma_desc(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + struct dwc2_qtd *qtd, + struct dwc2_qh *qh, u16 idx) +{ + struct dwc2_hcd_dma_desc *dma_desc = &qh->desc_list[idx]; + struct dwc2_hcd_iso_packet_desc *frame_desc; + u16 remain = 0; + int rc = 0; + + if (!qtd->urb) + return -EINVAL; + + frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index_last]; + dma_desc->buf = (u32)(qtd->urb->dma + frame_desc->offset); + if (chan->ep_is_in) + remain = (dma_desc->status & HOST_DMA_ISOC_NBYTES_MASK) >> + HOST_DMA_ISOC_NBYTES_SHIFT; + + if ((dma_desc->status & HOST_DMA_STS_MASK) == HOST_DMA_STS_PKTERR) { + /* + * XactError, or unable to complete all the transactions + * in the scheduled micro-frame/frame, both indicated by + * HOST_DMA_STS_PKTERR + */ + qtd->urb->error_count++; + frame_desc->actual_length = qh->n_bytes[idx] - remain; + frame_desc->status = -EPROTO; + } else { + /* Success */ + frame_desc->actual_length = qh->n_bytes[idx] - remain; + frame_desc->status = 0; + } + + if (++qtd->isoc_frame_index == qtd->urb->packet_count) { + /* + * urb->status is not used for isoc transfers here. The + * individual frame_desc status are used instead. + */ + dwc2_host_complete(hsotg, qtd, 0); + dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); + + /* + * This check is necessary because urb_dequeue can be called + * from urb complete callback (sound driver for example). All + * pending URBs are dequeued there, so no need for further + * processing. + */ + if (chan->halt_status == DWC2_HC_XFER_URB_DEQUEUE) + return -1; + rc = DWC2_CMPL_DONE; + } + + qh->ntd--; + + /* Stop if IOC requested descriptor reached */ + if (dma_desc->status & HOST_DMA_IOC) + rc = DWC2_CMPL_STOP; + + return rc; +} + +static void dwc2_complete_isoc_xfer_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + enum dwc2_halt_status halt_status) +{ + struct dwc2_hcd_iso_packet_desc *frame_desc; + struct dwc2_qtd *qtd, *qtd_tmp; + struct dwc2_qh *qh; + u16 idx; + int rc; + + qh = chan->qh; + idx = qh->td_first; + + if (chan->halt_status == DWC2_HC_XFER_URB_DEQUEUE) { + list_for_each_entry(qtd, &qh->qtd_list, qtd_list_entry) + qtd->in_process = 0; + return; + } + + if (halt_status == DWC2_HC_XFER_AHB_ERR || + halt_status == DWC2_HC_XFER_BABBLE_ERR) { + /* + * Channel is halted in these error cases, considered as serious + * issues. + * Complete all URBs marking all frames as failed, irrespective + * whether some of the descriptors (frames) succeeded or not. + * Pass error code to completion routine as well, to update + * urb->status, some of class drivers might use it to stop + * queing transfer requests. + */ + int err = halt_status == DWC2_HC_XFER_AHB_ERR ? + -EIO : -EOVERFLOW; + + list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, + qtd_list_entry) { + if (qtd->urb) { + for (idx = 0; idx < qtd->urb->packet_count; + idx++) { + frame_desc = &qtd->urb->iso_descs[idx]; + frame_desc->status = err; + } + + dwc2_host_complete(hsotg, qtd, err); + } + + dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); + } + + return; + } + + list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) { + if (!qtd->in_process) + break; + do { + rc = dwc2_cmpl_host_isoc_dma_desc(hsotg, chan, qtd, qh, + idx); + if (rc < 0) + return; + idx = dwc2_desclist_idx_inc(idx, qh->interval, + chan->speed); + if (rc == DWC2_CMPL_STOP) + goto stop_scan; + if (rc == DWC2_CMPL_DONE) + break; + } while (idx != qh->td_first); + } + +stop_scan: + qh->td_first = idx; +} + +static int dwc2_update_non_isoc_urb_state_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + struct dwc2_qtd *qtd, + struct dwc2_hcd_dma_desc *dma_desc, + enum dwc2_halt_status halt_status, + u32 n_bytes, int *xfer_done) +{ + struct dwc2_hcd_urb *urb = qtd->urb; + u16 remain = 0; + + if (chan->ep_is_in) + remain = (dma_desc->status & HOST_DMA_NBYTES_MASK) >> + HOST_DMA_NBYTES_SHIFT; + + dev_vdbg(hsotg->dev, "remain=%d dwc2_urb=%p\n", remain, urb); + + if (halt_status == DWC2_HC_XFER_AHB_ERR) { + dev_err(hsotg->dev, "EIO\n"); + urb->status = -EIO; + return 1; + } + + if ((dma_desc->status & HOST_DMA_STS_MASK) == HOST_DMA_STS_PKTERR) { + switch (halt_status) { + case DWC2_HC_XFER_STALL: + dev_vdbg(hsotg->dev, "Stall\n"); + urb->status = -EPIPE; + break; + case DWC2_HC_XFER_BABBLE_ERR: + dev_err(hsotg->dev, "Babble\n"); + urb->status = -EOVERFLOW; + break; + case DWC2_HC_XFER_XACT_ERR: + dev_err(hsotg->dev, "XactErr\n"); + urb->status = -EPROTO; + break; + default: + dev_err(hsotg->dev, + "%s: Unhandled descriptor error status (%d)\n", + __func__, halt_status); + break; + } + return 1; + } + + if (dma_desc->status & HOST_DMA_A) { + dev_vdbg(hsotg->dev, + "Active descriptor encountered on channel %d\n", + chan->hc_num); + return 0; + } + + if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL) { + if (qtd->control_phase == DWC2_CONTROL_DATA) { + urb->actual_length += n_bytes - remain; + if (remain || urb->actual_length >= urb->length) { + /* + * For Control Data stage do not set urb->status + * to 0, to prevent URB callback. Set it when + * Status phase is done. See below. + */ + *xfer_done = 1; + } + } else if (qtd->control_phase == DWC2_CONTROL_STATUS) { + urb->status = 0; + *xfer_done = 1; + } + /* No handling for SETUP stage */ + } else { + /* BULK and INTR */ + urb->actual_length += n_bytes - remain; + dev_vdbg(hsotg->dev, "length=%d actual=%d\n", urb->length, + urb->actual_length); + if (remain || urb->actual_length >= urb->length) { + urb->status = 0; + *xfer_done = 1; + } + } + + return 0; +} + +static int dwc2_process_non_isoc_desc(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + int chnum, struct dwc2_qtd *qtd, + int desc_num, + enum dwc2_halt_status halt_status, + int *xfer_done) +{ + struct dwc2_qh *qh = chan->qh; + struct dwc2_hcd_urb *urb = qtd->urb; + struct dwc2_hcd_dma_desc *dma_desc; + u32 n_bytes; + int failed; + + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + if (!urb) + return -EINVAL; + + dma_desc = &qh->desc_list[desc_num]; + n_bytes = qh->n_bytes[desc_num]; + dev_vdbg(hsotg->dev, + "qtd=%p dwc2_urb=%p desc_num=%d desc=%p n_bytes=%d\n", + qtd, urb, desc_num, dma_desc, n_bytes); + failed = dwc2_update_non_isoc_urb_state_ddma(hsotg, chan, qtd, dma_desc, + halt_status, n_bytes, + xfer_done); + if (failed || (*xfer_done && urb->status != -EINPROGRESS)) { + dwc2_host_complete(hsotg, qtd, urb->status); + dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); + dev_vdbg(hsotg->dev, "failed=%1x xfer_done=%1x status=%08x\n", + failed, *xfer_done, urb->status); + return failed; + } + + if (qh->ep_type == USB_ENDPOINT_XFER_CONTROL) { + switch (qtd->control_phase) { + case DWC2_CONTROL_SETUP: + if (urb->length > 0) + qtd->control_phase = DWC2_CONTROL_DATA; + else + qtd->control_phase = DWC2_CONTROL_STATUS; + dev_vdbg(hsotg->dev, + " Control setup transaction done\n"); + break; + case DWC2_CONTROL_DATA: + if (*xfer_done) { + qtd->control_phase = DWC2_CONTROL_STATUS; + dev_vdbg(hsotg->dev, + " Control data transfer done\n"); + } else if (desc_num + 1 == qtd->n_desc) { + /* + * Last descriptor for Control data stage which + * is not completed yet + */ + dwc2_hcd_save_data_toggle(hsotg, chan, chnum, + qtd); + } + break; + default: + break; + } + } + + return 0; +} + +static void dwc2_complete_non_isoc_xfer_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + int chnum, + enum dwc2_halt_status halt_status) +{ + struct list_head *qtd_item, *qtd_tmp; + struct dwc2_qh *qh = chan->qh; + struct dwc2_qtd *qtd = NULL; + int xfer_done; + int desc_num = 0; + + if (chan->halt_status == DWC2_HC_XFER_URB_DEQUEUE) { + list_for_each_entry(qtd, &qh->qtd_list, qtd_list_entry) + qtd->in_process = 0; + return; + } + + list_for_each_safe(qtd_item, qtd_tmp, &qh->qtd_list) { + int i; + + qtd = list_entry(qtd_item, struct dwc2_qtd, qtd_list_entry); + xfer_done = 0; + + for (i = 0; i < qtd->n_desc; i++) { + if (dwc2_process_non_isoc_desc(hsotg, chan, chnum, qtd, + desc_num, halt_status, + &xfer_done)) { + qtd = NULL; + break; + } + desc_num++; + } + } + + if (qh->ep_type != USB_ENDPOINT_XFER_CONTROL) { + /* + * Resetting the data toggle for bulk and interrupt endpoints + * in case of stall. See handle_hc_stall_intr(). + */ + if (halt_status == DWC2_HC_XFER_STALL) + qh->data_toggle = DWC2_HC_PID_DATA0; + else if (qtd) + dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd); + } + + if (halt_status == DWC2_HC_XFER_COMPLETE) { + if (chan->hcint & HCINTMSK_NYET) { + /* + * Got a NYET on the last transaction of the transfer. + * It means that the endpoint should be in the PING + * state at the beginning of the next transfer. + */ + qh->ping_state = 1; + } + } +} + +/** + * dwc2_hcd_complete_xfer_ddma() - Scans the descriptor list, updates URB's + * status and calls completion routine for the URB if it's done. Called from + * interrupt handlers. + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @chan: Host channel the transfer is completed on + * @chnum: Index of Host channel registers + * @halt_status: Reason the channel is being halted or just XferComplete + * for isochronous transfers + * + * Releases the channel to be used by other transfers. + * In case of Isochronous endpoint the channel is not halted until the end of + * the session, i.e. QTD list is empty. + * If periodic channel released the FrameList is updated accordingly. + * Calls transaction selection routines to activate pending transfers. + */ +void dwc2_hcd_complete_xfer_ddma(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + enum dwc2_halt_status halt_status) +{ + struct dwc2_qh *qh = chan->qh; + int continue_isoc_xfer = 0; + enum dwc2_transaction_type tr_type; + + if (chan->ep_type == USB_ENDPOINT_XFER_ISOC) { + dwc2_complete_isoc_xfer_ddma(hsotg, chan, halt_status); + + /* Release the channel if halted or session completed */ + if (halt_status != DWC2_HC_XFER_COMPLETE || + list_empty(&qh->qtd_list)) { + /* Halt the channel if session completed */ + if (halt_status == DWC2_HC_XFER_COMPLETE) + dwc2_hc_halt(hsotg, chan, halt_status); + dwc2_release_channel_ddma(hsotg, qh); + dwc2_hcd_qh_unlink(hsotg, qh); + } else { + /* Keep in assigned schedule to continue transfer */ + list_move(&qh->qh_list_entry, + &hsotg->periodic_sched_assigned); + continue_isoc_xfer = 1; + } + /* + * Todo: Consider the case when period exceeds FrameList size. + * Frame Rollover interrupt should be used. + */ + } else { + /* + * Scan descriptor list to complete the URB(s), then release + * the channel + */ + dwc2_complete_non_isoc_xfer_ddma(hsotg, chan, chnum, + halt_status); + dwc2_release_channel_ddma(hsotg, qh); + dwc2_hcd_qh_unlink(hsotg, qh); + + if (!list_empty(&qh->qtd_list)) { + /* + * Add back to inactive non-periodic schedule on normal + * completion + */ + dwc2_hcd_qh_add(hsotg, qh); + } + } + + tr_type = dwc2_hcd_select_transactions(hsotg); + if (tr_type != DWC2_TRANSACTION_NONE || continue_isoc_xfer) { + if (continue_isoc_xfer) { + if (tr_type == DWC2_TRANSACTION_NONE) + tr_type = DWC2_TRANSACTION_PERIODIC; + else if (tr_type == DWC2_TRANSACTION_NON_PERIODIC) + tr_type = DWC2_TRANSACTION_ALL; + } + dwc2_hcd_queue_transactions(hsotg, tr_type); + } +} diff --git a/kernel/drivers/usb/dwc2/hcd_intr.c b/kernel/drivers/usb/dwc2/hcd_intr.c new file mode 100644 index 000000000..551ba878b --- /dev/null +++ b/kernel/drivers/usb/dwc2/hcd_intr.c @@ -0,0 +1,2109 @@ +/* + * hcd_intr.c - DesignWare HS OTG Controller host-mode interrupt handling + * + * Copyright (C) 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * This file contains the interrupt handlers for Host mode + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/usb.h> + +#include <linux/usb/hcd.h> +#include <linux/usb/ch11.h> + +#include "core.h" +#include "hcd.h" + +/* This function is for debug only */ +static void dwc2_track_missed_sofs(struct dwc2_hsotg *hsotg) +{ +#ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS + u16 curr_frame_number = hsotg->frame_number; + + if (hsotg->frame_num_idx < FRAME_NUM_ARRAY_SIZE) { + if (((hsotg->last_frame_num + 1) & HFNUM_MAX_FRNUM) != + curr_frame_number) { + hsotg->frame_num_array[hsotg->frame_num_idx] = + curr_frame_number; + hsotg->last_frame_num_array[hsotg->frame_num_idx] = + hsotg->last_frame_num; + hsotg->frame_num_idx++; + } + } else if (!hsotg->dumped_frame_num_array) { + int i; + + dev_info(hsotg->dev, "Frame Last Frame\n"); + dev_info(hsotg->dev, "----- ----------\n"); + for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) { + dev_info(hsotg->dev, "0x%04x 0x%04x\n", + hsotg->frame_num_array[i], + hsotg->last_frame_num_array[i]); + } + hsotg->dumped_frame_num_array = 1; + } + hsotg->last_frame_num = curr_frame_number; +#endif +} + +static void dwc2_hc_handle_tt_clear(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + struct dwc2_qtd *qtd) +{ + struct urb *usb_urb; + + if (!chan->qh) + return; + + if (chan->qh->dev_speed == USB_SPEED_HIGH) + return; + + if (!qtd->urb) + return; + + usb_urb = qtd->urb->priv; + if (!usb_urb || !usb_urb->dev || !usb_urb->dev->tt) + return; + + if (qtd->urb->status != -EPIPE && qtd->urb->status != -EREMOTEIO) { + chan->qh->tt_buffer_dirty = 1; + if (usb_hub_clear_tt_buffer(usb_urb)) + /* Clear failed; let's hope things work anyway */ + chan->qh->tt_buffer_dirty = 0; + } +} + +/* + * Handles the start-of-frame interrupt in host mode. Non-periodic + * transactions may be queued to the DWC_otg controller for the current + * (micro)frame. Periodic transactions may be queued to the controller + * for the next (micro)frame. + */ +static void dwc2_sof_intr(struct dwc2_hsotg *hsotg) +{ + struct list_head *qh_entry; + struct dwc2_qh *qh; + enum dwc2_transaction_type tr_type; + +#ifdef DEBUG_SOF + dev_vdbg(hsotg->dev, "--Start of Frame Interrupt--\n"); +#endif + + hsotg->frame_number = dwc2_hcd_get_frame_number(hsotg); + + dwc2_track_missed_sofs(hsotg); + + /* Determine whether any periodic QHs should be executed */ + qh_entry = hsotg->periodic_sched_inactive.next; + while (qh_entry != &hsotg->periodic_sched_inactive) { + qh = list_entry(qh_entry, struct dwc2_qh, qh_list_entry); + qh_entry = qh_entry->next; + if (dwc2_frame_num_le(qh->sched_frame, hsotg->frame_number)) + /* + * Move QH to the ready list to be executed next + * (micro)frame + */ + list_move(&qh->qh_list_entry, + &hsotg->periodic_sched_ready); + } + tr_type = dwc2_hcd_select_transactions(hsotg); + if (tr_type != DWC2_TRANSACTION_NONE) + dwc2_hcd_queue_transactions(hsotg, tr_type); + + /* Clear interrupt */ + writel(GINTSTS_SOF, hsotg->regs + GINTSTS); +} + +/* + * Handles the Rx FIFO Level Interrupt, which indicates that there is + * at least one packet in the Rx FIFO. The packets are moved from the FIFO to + * memory if the DWC_otg controller is operating in Slave mode. + */ +static void dwc2_rx_fifo_level_intr(struct dwc2_hsotg *hsotg) +{ + u32 grxsts, chnum, bcnt, dpid, pktsts; + struct dwc2_host_chan *chan; + + if (dbg_perio()) + dev_vdbg(hsotg->dev, "--RxFIFO Level Interrupt--\n"); + + grxsts = readl(hsotg->regs + GRXSTSP); + chnum = (grxsts & GRXSTS_HCHNUM_MASK) >> GRXSTS_HCHNUM_SHIFT; + chan = hsotg->hc_ptr_array[chnum]; + if (!chan) { + dev_err(hsotg->dev, "Unable to get corresponding channel\n"); + return; + } + + bcnt = (grxsts & GRXSTS_BYTECNT_MASK) >> GRXSTS_BYTECNT_SHIFT; + dpid = (grxsts & GRXSTS_DPID_MASK) >> GRXSTS_DPID_SHIFT; + pktsts = (grxsts & GRXSTS_PKTSTS_MASK) >> GRXSTS_PKTSTS_SHIFT; + + /* Packet Status */ + if (dbg_perio()) { + dev_vdbg(hsotg->dev, " Ch num = %d\n", chnum); + dev_vdbg(hsotg->dev, " Count = %d\n", bcnt); + dev_vdbg(hsotg->dev, " DPID = %d, chan.dpid = %d\n", dpid, + chan->data_pid_start); + dev_vdbg(hsotg->dev, " PStatus = %d\n", pktsts); + } + + switch (pktsts) { + case GRXSTS_PKTSTS_HCHIN: + /* Read the data into the host buffer */ + if (bcnt > 0) { + dwc2_read_packet(hsotg, chan->xfer_buf, bcnt); + + /* Update the HC fields for the next packet received */ + chan->xfer_count += bcnt; + chan->xfer_buf += bcnt; + } + break; + case GRXSTS_PKTSTS_HCHIN_XFER_COMP: + case GRXSTS_PKTSTS_DATATOGGLEERR: + case GRXSTS_PKTSTS_HCHHALTED: + /* Handled in interrupt, just ignore data */ + break; + default: + dev_err(hsotg->dev, + "RxFIFO Level Interrupt: Unknown status %d\n", pktsts); + break; + } +} + +/* + * This interrupt occurs when the non-periodic Tx FIFO is half-empty. More + * data packets may be written to the FIFO for OUT transfers. More requests + * may be written to the non-periodic request queue for IN transfers. This + * interrupt is enabled only in Slave mode. + */ +static void dwc2_np_tx_fifo_empty_intr(struct dwc2_hsotg *hsotg) +{ + dev_vdbg(hsotg->dev, "--Non-Periodic TxFIFO Empty Interrupt--\n"); + dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_NON_PERIODIC); +} + +/* + * This interrupt occurs when the periodic Tx FIFO is half-empty. More data + * packets may be written to the FIFO for OUT transfers. More requests may be + * written to the periodic request queue for IN transfers. This interrupt is + * enabled only in Slave mode. + */ +static void dwc2_perio_tx_fifo_empty_intr(struct dwc2_hsotg *hsotg) +{ + if (dbg_perio()) + dev_vdbg(hsotg->dev, "--Periodic TxFIFO Empty Interrupt--\n"); + dwc2_hcd_queue_transactions(hsotg, DWC2_TRANSACTION_PERIODIC); +} + +static void dwc2_hprt0_enable(struct dwc2_hsotg *hsotg, u32 hprt0, + u32 *hprt0_modify) +{ + struct dwc2_core_params *params = hsotg->core_params; + int do_reset = 0; + u32 usbcfg; + u32 prtspd; + u32 hcfg; + u32 fslspclksel; + u32 hfir; + + dev_vdbg(hsotg->dev, "%s(%p)\n", __func__, hsotg); + + /* Every time when port enables calculate HFIR.FrInterval */ + hfir = readl(hsotg->regs + HFIR); + hfir &= ~HFIR_FRINT_MASK; + hfir |= dwc2_calc_frame_interval(hsotg) << HFIR_FRINT_SHIFT & + HFIR_FRINT_MASK; + writel(hfir, hsotg->regs + HFIR); + + /* Check if we need to adjust the PHY clock speed for low power */ + if (!params->host_support_fs_ls_low_power) { + /* Port has been enabled, set the reset change flag */ + hsotg->flags.b.port_reset_change = 1; + return; + } + + usbcfg = readl(hsotg->regs + GUSBCFG); + prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; + + if (prtspd == HPRT0_SPD_LOW_SPEED || prtspd == HPRT0_SPD_FULL_SPEED) { + /* Low power */ + if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL)) { + /* Set PHY low power clock select for FS/LS devices */ + usbcfg |= GUSBCFG_PHY_LP_CLK_SEL; + writel(usbcfg, hsotg->regs + GUSBCFG); + do_reset = 1; + } + + hcfg = readl(hsotg->regs + HCFG); + fslspclksel = (hcfg & HCFG_FSLSPCLKSEL_MASK) >> + HCFG_FSLSPCLKSEL_SHIFT; + + if (prtspd == HPRT0_SPD_LOW_SPEED && + params->host_ls_low_power_phy_clk == + DWC2_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ) { + /* 6 MHZ */ + dev_vdbg(hsotg->dev, + "FS_PHY programming HCFG to 6 MHz\n"); + if (fslspclksel != HCFG_FSLSPCLKSEL_6_MHZ) { + fslspclksel = HCFG_FSLSPCLKSEL_6_MHZ; + hcfg &= ~HCFG_FSLSPCLKSEL_MASK; + hcfg |= fslspclksel << HCFG_FSLSPCLKSEL_SHIFT; + writel(hcfg, hsotg->regs + HCFG); + do_reset = 1; + } + } else { + /* 48 MHZ */ + dev_vdbg(hsotg->dev, + "FS_PHY programming HCFG to 48 MHz\n"); + if (fslspclksel != HCFG_FSLSPCLKSEL_48_MHZ) { + fslspclksel = HCFG_FSLSPCLKSEL_48_MHZ; + hcfg &= ~HCFG_FSLSPCLKSEL_MASK; + hcfg |= fslspclksel << HCFG_FSLSPCLKSEL_SHIFT; + writel(hcfg, hsotg->regs + HCFG); + do_reset = 1; + } + } + } else { + /* Not low power */ + if (usbcfg & GUSBCFG_PHY_LP_CLK_SEL) { + usbcfg &= ~GUSBCFG_PHY_LP_CLK_SEL; + writel(usbcfg, hsotg->regs + GUSBCFG); + do_reset = 1; + } + } + + if (do_reset) { + *hprt0_modify |= HPRT0_RST; + queue_delayed_work(hsotg->wq_otg, &hsotg->reset_work, + msecs_to_jiffies(60)); + } else { + /* Port has been enabled, set the reset change flag */ + hsotg->flags.b.port_reset_change = 1; + } +} + +/* + * There are multiple conditions that can cause a port interrupt. This function + * determines which interrupt conditions have occurred and handles them + * appropriately. + */ +static void dwc2_port_intr(struct dwc2_hsotg *hsotg) +{ + u32 hprt0; + u32 hprt0_modify; + + dev_vdbg(hsotg->dev, "--Port Interrupt--\n"); + + hprt0 = readl(hsotg->regs + HPRT0); + hprt0_modify = hprt0; + + /* + * Clear appropriate bits in HPRT0 to clear the interrupt bit in + * GINTSTS + */ + hprt0_modify &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_ENACHG | + HPRT0_OVRCURRCHG); + + /* + * Port Connect Detected + * Set flag and clear if detected + */ + if (hprt0 & HPRT0_CONNDET) { + dev_vdbg(hsotg->dev, + "--Port Interrupt HPRT0=0x%08x Port Connect Detected--\n", + hprt0); + hsotg->flags.b.port_connect_status_change = 1; + hsotg->flags.b.port_connect_status = 1; + hprt0_modify |= HPRT0_CONNDET; + + /* + * The Hub driver asserts a reset when it sees port connect + * status change flag + */ + } + + /* + * Port Enable Changed + * Clear if detected - Set internal flag if disabled + */ + if (hprt0 & HPRT0_ENACHG) { + dev_vdbg(hsotg->dev, + " --Port Interrupt HPRT0=0x%08x Port Enable Changed (now %d)--\n", + hprt0, !!(hprt0 & HPRT0_ENA)); + hprt0_modify |= HPRT0_ENACHG; + if (hprt0 & HPRT0_ENA) + dwc2_hprt0_enable(hsotg, hprt0, &hprt0_modify); + else + hsotg->flags.b.port_enable_change = 1; + } + + /* Overcurrent Change Interrupt */ + if (hprt0 & HPRT0_OVRCURRCHG) { + dev_vdbg(hsotg->dev, + " --Port Interrupt HPRT0=0x%08x Port Overcurrent Changed--\n", + hprt0); + hsotg->flags.b.port_over_current_change = 1; + hprt0_modify |= HPRT0_OVRCURRCHG; + } + + /* Clear Port Interrupts */ + writel(hprt0_modify, hsotg->regs + HPRT0); +} + +/* + * Gets the actual length of a transfer after the transfer halts. halt_status + * holds the reason for the halt. + * + * For IN transfers where halt_status is DWC2_HC_XFER_COMPLETE, *short_read + * is set to 1 upon return if less than the requested number of bytes were + * transferred. short_read may also be NULL on entry, in which case it remains + * unchanged. + */ +static u32 dwc2_get_actual_xfer_length(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd, + enum dwc2_halt_status halt_status, + int *short_read) +{ + u32 hctsiz, count, length; + + hctsiz = readl(hsotg->regs + HCTSIZ(chnum)); + + if (halt_status == DWC2_HC_XFER_COMPLETE) { + if (chan->ep_is_in) { + count = (hctsiz & TSIZ_XFERSIZE_MASK) >> + TSIZ_XFERSIZE_SHIFT; + length = chan->xfer_len - count; + if (short_read != NULL) + *short_read = (count != 0); + } else if (chan->qh->do_split) { + length = qtd->ssplit_out_xfer_count; + } else { + length = chan->xfer_len; + } + } else { + /* + * Must use the hctsiz.pktcnt field to determine how much data + * has been transferred. This field reflects the number of + * packets that have been transferred via the USB. This is + * always an integral number of packets if the transfer was + * halted before its normal completion. (Can't use the + * hctsiz.xfersize field because that reflects the number of + * bytes transferred via the AHB, not the USB). + */ + count = (hctsiz & TSIZ_PKTCNT_MASK) >> TSIZ_PKTCNT_SHIFT; + length = (chan->start_pkt_count - count) * chan->max_packet; + } + + return length; +} + +/** + * dwc2_update_urb_state() - Updates the state of the URB after a Transfer + * Complete interrupt on the host channel. Updates the actual_length field + * of the URB based on the number of bytes transferred via the host channel. + * Sets the URB status if the data transfer is finished. + * + * Return: 1 if the data transfer specified by the URB is completely finished, + * 0 otherwise + */ +static int dwc2_update_urb_state(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_hcd_urb *urb, + struct dwc2_qtd *qtd) +{ + u32 hctsiz; + int xfer_done = 0; + int short_read = 0; + int xfer_length = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd, + DWC2_HC_XFER_COMPLETE, + &short_read); + + if (urb->actual_length + xfer_length > urb->length) { + dev_warn(hsotg->dev, "%s(): trimming xfer length\n", __func__); + xfer_length = urb->length - urb->actual_length; + } + + /* Non DWORD-aligned buffer case handling */ + if (chan->align_buf && xfer_length && chan->ep_is_in) { + dev_vdbg(hsotg->dev, "%s(): non-aligned buffer\n", __func__); + memcpy(urb->buf + urb->actual_length, chan->qh->dw_align_buf, + xfer_length); + } + + dev_vdbg(hsotg->dev, "urb->actual_length=%d xfer_length=%d\n", + urb->actual_length, xfer_length); + urb->actual_length += xfer_length; + + if (xfer_length && chan->ep_type == USB_ENDPOINT_XFER_BULK && + (urb->flags & URB_SEND_ZERO_PACKET) && + urb->actual_length >= urb->length && + !(urb->length % chan->max_packet)) { + xfer_done = 0; + } else if (short_read || urb->actual_length >= urb->length) { + xfer_done = 1; + urb->status = 0; + } + + hctsiz = readl(hsotg->regs + HCTSIZ(chnum)); + dev_vdbg(hsotg->dev, "DWC_otg: %s: %s, channel %d\n", + __func__, (chan->ep_is_in ? "IN" : "OUT"), chnum); + dev_vdbg(hsotg->dev, " chan->xfer_len %d\n", chan->xfer_len); + dev_vdbg(hsotg->dev, " hctsiz.xfersize %d\n", + (hctsiz & TSIZ_XFERSIZE_MASK) >> TSIZ_XFERSIZE_SHIFT); + dev_vdbg(hsotg->dev, " urb->transfer_buffer_length %d\n", urb->length); + dev_vdbg(hsotg->dev, " urb->actual_length %d\n", urb->actual_length); + dev_vdbg(hsotg->dev, " short_read %d, xfer_done %d\n", short_read, + xfer_done); + + return xfer_done; +} + +/* + * Save the starting data toggle for the next transfer. The data toggle is + * saved in the QH for non-control transfers and it's saved in the QTD for + * control transfers. + */ +void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + u32 hctsiz = readl(hsotg->regs + HCTSIZ(chnum)); + u32 pid = (hctsiz & TSIZ_SC_MC_PID_MASK) >> TSIZ_SC_MC_PID_SHIFT; + + if (chan->ep_type != USB_ENDPOINT_XFER_CONTROL) { + if (pid == TSIZ_SC_MC_PID_DATA0) + chan->qh->data_toggle = DWC2_HC_PID_DATA0; + else + chan->qh->data_toggle = DWC2_HC_PID_DATA1; + } else { + if (pid == TSIZ_SC_MC_PID_DATA0) + qtd->data_toggle = DWC2_HC_PID_DATA0; + else + qtd->data_toggle = DWC2_HC_PID_DATA1; + } +} + +/** + * dwc2_update_isoc_urb_state() - Updates the state of an Isochronous URB when + * the transfer is stopped for any reason. The fields of the current entry in + * the frame descriptor array are set based on the transfer state and the input + * halt_status. Completes the Isochronous URB if all the URB frames have been + * completed. + * + * Return: DWC2_HC_XFER_COMPLETE if there are more frames remaining to be + * transferred in the URB. Otherwise return DWC2_HC_XFER_URB_COMPLETE. + */ +static enum dwc2_halt_status dwc2_update_isoc_urb_state( + struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan, + int chnum, struct dwc2_qtd *qtd, + enum dwc2_halt_status halt_status) +{ + struct dwc2_hcd_iso_packet_desc *frame_desc; + struct dwc2_hcd_urb *urb = qtd->urb; + + if (!urb) + return DWC2_HC_XFER_NO_HALT_STATUS; + + frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; + + switch (halt_status) { + case DWC2_HC_XFER_COMPLETE: + frame_desc->status = 0; + frame_desc->actual_length = dwc2_get_actual_xfer_length(hsotg, + chan, chnum, qtd, halt_status, NULL); + + /* Non DWORD-aligned buffer case handling */ + if (chan->align_buf && frame_desc->actual_length && + chan->ep_is_in) { + dev_vdbg(hsotg->dev, "%s(): non-aligned buffer\n", + __func__); + memcpy(urb->buf + frame_desc->offset + + qtd->isoc_split_offset, chan->qh->dw_align_buf, + frame_desc->actual_length); + } + break; + case DWC2_HC_XFER_FRAME_OVERRUN: + urb->error_count++; + if (chan->ep_is_in) + frame_desc->status = -ENOSR; + else + frame_desc->status = -ECOMM; + frame_desc->actual_length = 0; + break; + case DWC2_HC_XFER_BABBLE_ERR: + urb->error_count++; + frame_desc->status = -EOVERFLOW; + /* Don't need to update actual_length in this case */ + break; + case DWC2_HC_XFER_XACT_ERR: + urb->error_count++; + frame_desc->status = -EPROTO; + frame_desc->actual_length = dwc2_get_actual_xfer_length(hsotg, + chan, chnum, qtd, halt_status, NULL); + + /* Non DWORD-aligned buffer case handling */ + if (chan->align_buf && frame_desc->actual_length && + chan->ep_is_in) { + dev_vdbg(hsotg->dev, "%s(): non-aligned buffer\n", + __func__); + memcpy(urb->buf + frame_desc->offset + + qtd->isoc_split_offset, chan->qh->dw_align_buf, + frame_desc->actual_length); + } + + /* Skip whole frame */ + if (chan->qh->do_split && + chan->ep_type == USB_ENDPOINT_XFER_ISOC && chan->ep_is_in && + hsotg->core_params->dma_enable > 0) { + qtd->complete_split = 0; + qtd->isoc_split_offset = 0; + } + + break; + default: + dev_err(hsotg->dev, "Unhandled halt_status (%d)\n", + halt_status); + break; + } + + if (++qtd->isoc_frame_index == urb->packet_count) { + /* + * urb->status is not used for isoc transfers. The individual + * frame_desc statuses are used instead. + */ + dwc2_host_complete(hsotg, qtd, 0); + halt_status = DWC2_HC_XFER_URB_COMPLETE; + } else { + halt_status = DWC2_HC_XFER_COMPLETE; + } + + return halt_status; +} + +/* + * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic + * QHs, removes the QH from the active non-periodic schedule. If any QTDs are + * still linked to the QH, the QH is added to the end of the inactive + * non-periodic schedule. For periodic QHs, removes the QH from the periodic + * schedule if no more QTDs are linked to the QH. + */ +static void dwc2_deactivate_qh(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, + int free_qtd) +{ + int continue_split = 0; + struct dwc2_qtd *qtd; + + if (dbg_qh(qh)) + dev_vdbg(hsotg->dev, " %s(%p,%p,%d)\n", __func__, + hsotg, qh, free_qtd); + + if (list_empty(&qh->qtd_list)) { + dev_dbg(hsotg->dev, "## QTD list empty ##\n"); + goto no_qtd; + } + + qtd = list_first_entry(&qh->qtd_list, struct dwc2_qtd, qtd_list_entry); + + if (qtd->complete_split) + continue_split = 1; + else if (qtd->isoc_split_pos == DWC2_HCSPLT_XACTPOS_MID || + qtd->isoc_split_pos == DWC2_HCSPLT_XACTPOS_END) + continue_split = 1; + + if (free_qtd) { + dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh); + continue_split = 0; + } + +no_qtd: + if (qh->channel) + qh->channel->align_buf = 0; + qh->channel = NULL; + dwc2_hcd_qh_deactivate(hsotg, qh, continue_split); +} + +/** + * dwc2_release_channel() - Releases a host channel for use by other transfers + * + * @hsotg: The HCD state structure + * @chan: The host channel to release + * @qtd: The QTD associated with the host channel. This QTD may be + * freed if the transfer is complete or an error has occurred. + * @halt_status: Reason the channel is being released. This status + * determines the actions taken by this function. + * + * Also attempts to select and queue more transactions since at least one host + * channel is available. + */ +static void dwc2_release_channel(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + struct dwc2_qtd *qtd, + enum dwc2_halt_status halt_status) +{ + enum dwc2_transaction_type tr_type; + u32 haintmsk; + int free_qtd = 0; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, " %s: channel %d, halt_status %d\n", + __func__, chan->hc_num, halt_status); + + switch (halt_status) { + case DWC2_HC_XFER_URB_COMPLETE: + free_qtd = 1; + break; + case DWC2_HC_XFER_AHB_ERR: + case DWC2_HC_XFER_STALL: + case DWC2_HC_XFER_BABBLE_ERR: + free_qtd = 1; + break; + case DWC2_HC_XFER_XACT_ERR: + if (qtd && qtd->error_count >= 3) { + dev_vdbg(hsotg->dev, + " Complete URB with transaction error\n"); + free_qtd = 1; + dwc2_host_complete(hsotg, qtd, -EPROTO); + } + break; + case DWC2_HC_XFER_URB_DEQUEUE: + /* + * The QTD has already been removed and the QH has been + * deactivated. Don't want to do anything except release the + * host channel and try to queue more transfers. + */ + goto cleanup; + case DWC2_HC_XFER_PERIODIC_INCOMPLETE: + dev_vdbg(hsotg->dev, " Complete URB with I/O error\n"); + free_qtd = 1; + dwc2_host_complete(hsotg, qtd, -EIO); + break; + case DWC2_HC_XFER_NO_HALT_STATUS: + default: + break; + } + + dwc2_deactivate_qh(hsotg, chan->qh, free_qtd); + +cleanup: + /* + * Release the host channel for use by other transfers. The cleanup + * function clears the channel interrupt enables and conditions, so + * there's no need to clear the Channel Halted interrupt separately. + */ + if (!list_empty(&chan->hc_list_entry)) + list_del(&chan->hc_list_entry); + dwc2_hc_cleanup(hsotg, chan); + list_add_tail(&chan->hc_list_entry, &hsotg->free_hc_list); + + if (hsotg->core_params->uframe_sched > 0) { + hsotg->available_host_channels++; + } else { + switch (chan->ep_type) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + hsotg->non_periodic_channels--; + break; + default: + /* + * Don't release reservations for periodic channels + * here. That's done when a periodic transfer is + * descheduled (i.e. when the QH is removed from the + * periodic schedule). + */ + break; + } + } + + haintmsk = readl(hsotg->regs + HAINTMSK); + haintmsk &= ~(1 << chan->hc_num); + writel(haintmsk, hsotg->regs + HAINTMSK); + + /* Try to queue more transfers now that there's a free channel */ + tr_type = dwc2_hcd_select_transactions(hsotg); + if (tr_type != DWC2_TRANSACTION_NONE) + dwc2_hcd_queue_transactions(hsotg, tr_type); +} + +/* + * Halts a host channel. If the channel cannot be halted immediately because + * the request queue is full, this function ensures that the FIFO empty + * interrupt for the appropriate queue is enabled so that the halt request can + * be queued when there is space in the request queue. + * + * This function may also be called in DMA mode. In that case, the channel is + * simply released since the core always halts the channel automatically in + * DMA mode. + */ +static void dwc2_halt_channel(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, struct dwc2_qtd *qtd, + enum dwc2_halt_status halt_status) +{ + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + if (hsotg->core_params->dma_enable > 0) { + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "DMA enabled\n"); + dwc2_release_channel(hsotg, chan, qtd, halt_status); + return; + } + + /* Slave mode processing */ + dwc2_hc_halt(hsotg, chan, halt_status); + + if (chan->halt_on_queue) { + u32 gintmsk; + + dev_vdbg(hsotg->dev, "Halt on queue\n"); + if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL || + chan->ep_type == USB_ENDPOINT_XFER_BULK) { + dev_vdbg(hsotg->dev, "control/bulk\n"); + /* + * Make sure the Non-periodic Tx FIFO empty interrupt + * is enabled so that the non-periodic schedule will + * be processed + */ + gintmsk = readl(hsotg->regs + GINTMSK); + gintmsk |= GINTSTS_NPTXFEMP; + writel(gintmsk, hsotg->regs + GINTMSK); + } else { + dev_vdbg(hsotg->dev, "isoc/intr\n"); + /* + * Move the QH from the periodic queued schedule to + * the periodic assigned schedule. This allows the + * halt to be queued when the periodic schedule is + * processed. + */ + list_move(&chan->qh->qh_list_entry, + &hsotg->periodic_sched_assigned); + + /* + * Make sure the Periodic Tx FIFO Empty interrupt is + * enabled so that the periodic schedule will be + * processed + */ + gintmsk = readl(hsotg->regs + GINTMSK); + gintmsk |= GINTSTS_PTXFEMP; + writel(gintmsk, hsotg->regs + GINTMSK); + } + } +} + +/* + * Performs common cleanup for non-periodic transfers after a Transfer + * Complete interrupt. This function should be called after any endpoint type + * specific handling is finished to release the host channel. + */ +static void dwc2_complete_non_periodic_xfer(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, + int chnum, struct dwc2_qtd *qtd, + enum dwc2_halt_status halt_status) +{ + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + qtd->error_count = 0; + + if (chan->hcint & HCINTMSK_NYET) { + /* + * Got a NYET on the last transaction of the transfer. This + * means that the endpoint should be in the PING state at the + * beginning of the next transfer. + */ + dev_vdbg(hsotg->dev, "got NYET\n"); + chan->qh->ping_state = 1; + } + + /* + * Always halt and release the host channel to make it available for + * more transfers. There may still be more phases for a control + * transfer or more data packets for a bulk transfer at this point, + * but the host channel is still halted. A channel will be reassigned + * to the transfer when the non-periodic schedule is processed after + * the channel is released. This allows transactions to be queued + * properly via dwc2_hcd_queue_transactions, which also enables the + * Tx FIFO Empty interrupt if necessary. + */ + if (chan->ep_is_in) { + /* + * IN transfers in Slave mode require an explicit disable to + * halt the channel. (In DMA mode, this call simply releases + * the channel.) + */ + dwc2_halt_channel(hsotg, chan, qtd, halt_status); + } else { + /* + * The channel is automatically disabled by the core for OUT + * transfers in Slave mode + */ + dwc2_release_channel(hsotg, chan, qtd, halt_status); + } +} + +/* + * Performs common cleanup for periodic transfers after a Transfer Complete + * interrupt. This function should be called after any endpoint type specific + * handling is finished to release the host channel. + */ +static void dwc2_complete_periodic_xfer(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd, + enum dwc2_halt_status halt_status) +{ + u32 hctsiz = readl(hsotg->regs + HCTSIZ(chnum)); + + qtd->error_count = 0; + + if (!chan->ep_is_in || (hctsiz & TSIZ_PKTCNT_MASK) == 0) + /* Core halts channel in these cases */ + dwc2_release_channel(hsotg, chan, qtd, halt_status); + else + /* Flush any outstanding requests from the Tx queue */ + dwc2_halt_channel(hsotg, chan, qtd, halt_status); +} + +static int dwc2_xfercomp_isoc_split_in(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + struct dwc2_hcd_iso_packet_desc *frame_desc; + u32 len; + + if (!qtd->urb) + return 0; + + frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; + len = dwc2_get_actual_xfer_length(hsotg, chan, chnum, qtd, + DWC2_HC_XFER_COMPLETE, NULL); + if (!len) { + qtd->complete_split = 0; + qtd->isoc_split_offset = 0; + return 0; + } + + frame_desc->actual_length += len; + + if (chan->align_buf) { + dev_vdbg(hsotg->dev, "%s(): non-aligned buffer\n", __func__); + memcpy(qtd->urb->buf + frame_desc->offset + + qtd->isoc_split_offset, chan->qh->dw_align_buf, len); + } + + qtd->isoc_split_offset += len; + + if (frame_desc->actual_length >= frame_desc->length) { + frame_desc->status = 0; + qtd->isoc_frame_index++; + qtd->complete_split = 0; + qtd->isoc_split_offset = 0; + } + + if (qtd->isoc_frame_index == qtd->urb->packet_count) { + dwc2_host_complete(hsotg, qtd, 0); + dwc2_release_channel(hsotg, chan, qtd, + DWC2_HC_XFER_URB_COMPLETE); + } else { + dwc2_release_channel(hsotg, chan, qtd, + DWC2_HC_XFER_NO_HALT_STATUS); + } + + return 1; /* Indicates that channel released */ +} + +/* + * Handles a host channel Transfer Complete interrupt. This handler may be + * called in either DMA mode or Slave mode. + */ +static void dwc2_hc_xfercomp_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + struct dwc2_hcd_urb *urb = qtd->urb; + enum dwc2_halt_status halt_status = DWC2_HC_XFER_COMPLETE; + int pipe_type; + int urb_xfer_done; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, + "--Host Channel %d Interrupt: Transfer Complete--\n", + chnum); + + if (!urb) + goto handle_xfercomp_done; + + pipe_type = dwc2_hcd_get_pipe_type(&urb->pipe_info); + + if (hsotg->core_params->dma_desc_enable > 0) { + dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum, halt_status); + if (pipe_type == USB_ENDPOINT_XFER_ISOC) + /* Do not disable the interrupt, just clear it */ + return; + goto handle_xfercomp_done; + } + + /* Handle xfer complete on CSPLIT */ + if (chan->qh->do_split) { + if (chan->ep_type == USB_ENDPOINT_XFER_ISOC && chan->ep_is_in && + hsotg->core_params->dma_enable > 0) { + if (qtd->complete_split && + dwc2_xfercomp_isoc_split_in(hsotg, chan, chnum, + qtd)) + goto handle_xfercomp_done; + } else { + qtd->complete_split = 0; + } + } + + /* Update the QTD and URB states */ + switch (pipe_type) { + case USB_ENDPOINT_XFER_CONTROL: + switch (qtd->control_phase) { + case DWC2_CONTROL_SETUP: + if (urb->length > 0) + qtd->control_phase = DWC2_CONTROL_DATA; + else + qtd->control_phase = DWC2_CONTROL_STATUS; + dev_vdbg(hsotg->dev, + " Control setup transaction done\n"); + halt_status = DWC2_HC_XFER_COMPLETE; + break; + case DWC2_CONTROL_DATA: + urb_xfer_done = dwc2_update_urb_state(hsotg, chan, + chnum, urb, qtd); + if (urb_xfer_done) { + qtd->control_phase = DWC2_CONTROL_STATUS; + dev_vdbg(hsotg->dev, + " Control data transfer done\n"); + } else { + dwc2_hcd_save_data_toggle(hsotg, chan, chnum, + qtd); + } + halt_status = DWC2_HC_XFER_COMPLETE; + break; + case DWC2_CONTROL_STATUS: + dev_vdbg(hsotg->dev, " Control transfer complete\n"); + if (urb->status == -EINPROGRESS) + urb->status = 0; + dwc2_host_complete(hsotg, qtd, urb->status); + halt_status = DWC2_HC_XFER_URB_COMPLETE; + break; + } + + dwc2_complete_non_periodic_xfer(hsotg, chan, chnum, qtd, + halt_status); + break; + case USB_ENDPOINT_XFER_BULK: + dev_vdbg(hsotg->dev, " Bulk transfer complete\n"); + urb_xfer_done = dwc2_update_urb_state(hsotg, chan, chnum, urb, + qtd); + if (urb_xfer_done) { + dwc2_host_complete(hsotg, qtd, urb->status); + halt_status = DWC2_HC_XFER_URB_COMPLETE; + } else { + halt_status = DWC2_HC_XFER_COMPLETE; + } + + dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd); + dwc2_complete_non_periodic_xfer(hsotg, chan, chnum, qtd, + halt_status); + break; + case USB_ENDPOINT_XFER_INT: + dev_vdbg(hsotg->dev, " Interrupt transfer complete\n"); + urb_xfer_done = dwc2_update_urb_state(hsotg, chan, chnum, urb, + qtd); + + /* + * Interrupt URB is done on the first transfer complete + * interrupt + */ + if (urb_xfer_done) { + dwc2_host_complete(hsotg, qtd, urb->status); + halt_status = DWC2_HC_XFER_URB_COMPLETE; + } else { + halt_status = DWC2_HC_XFER_COMPLETE; + } + + dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd); + dwc2_complete_periodic_xfer(hsotg, chan, chnum, qtd, + halt_status); + break; + case USB_ENDPOINT_XFER_ISOC: + if (dbg_perio()) + dev_vdbg(hsotg->dev, " Isochronous transfer complete\n"); + if (qtd->isoc_split_pos == DWC2_HCSPLT_XACTPOS_ALL) + halt_status = dwc2_update_isoc_urb_state(hsotg, chan, + chnum, qtd, DWC2_HC_XFER_COMPLETE); + dwc2_complete_periodic_xfer(hsotg, chan, chnum, qtd, + halt_status); + break; + } + +handle_xfercomp_done: + disable_hc_int(hsotg, chnum, HCINTMSK_XFERCOMPL); +} + +/* + * Handles a host channel STALL interrupt. This handler may be called in + * either DMA mode or Slave mode. + */ +static void dwc2_hc_stall_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + struct dwc2_hcd_urb *urb = qtd->urb; + int pipe_type; + + dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: STALL Received--\n", + chnum); + + if (hsotg->core_params->dma_desc_enable > 0) { + dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum, + DWC2_HC_XFER_STALL); + goto handle_stall_done; + } + + if (!urb) + goto handle_stall_halt; + + pipe_type = dwc2_hcd_get_pipe_type(&urb->pipe_info); + + if (pipe_type == USB_ENDPOINT_XFER_CONTROL) + dwc2_host_complete(hsotg, qtd, -EPIPE); + + if (pipe_type == USB_ENDPOINT_XFER_BULK || + pipe_type == USB_ENDPOINT_XFER_INT) { + dwc2_host_complete(hsotg, qtd, -EPIPE); + /* + * USB protocol requires resetting the data toggle for bulk + * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT) + * setup command is issued to the endpoint. Anticipate the + * CLEAR_FEATURE command since a STALL has occurred and reset + * the data toggle now. + */ + chan->qh->data_toggle = 0; + } + +handle_stall_halt: + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_STALL); + +handle_stall_done: + disable_hc_int(hsotg, chnum, HCINTMSK_STALL); +} + +/* + * Updates the state of the URB when a transfer has been stopped due to an + * abnormal condition before the transfer completes. Modifies the + * actual_length field of the URB to reflect the number of bytes that have + * actually been transferred via the host channel. + */ +static void dwc2_update_urb_state_abn(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_hcd_urb *urb, + struct dwc2_qtd *qtd, + enum dwc2_halt_status halt_status) +{ + u32 xfer_length = dwc2_get_actual_xfer_length(hsotg, chan, chnum, + qtd, halt_status, NULL); + u32 hctsiz; + + if (urb->actual_length + xfer_length > urb->length) { + dev_warn(hsotg->dev, "%s(): trimming xfer length\n", __func__); + xfer_length = urb->length - urb->actual_length; + } + + /* Non DWORD-aligned buffer case handling */ + if (chan->align_buf && xfer_length && chan->ep_is_in) { + dev_vdbg(hsotg->dev, "%s(): non-aligned buffer\n", __func__); + memcpy(urb->buf + urb->actual_length, chan->qh->dw_align_buf, + xfer_length); + } + + urb->actual_length += xfer_length; + + hctsiz = readl(hsotg->regs + HCTSIZ(chnum)); + dev_vdbg(hsotg->dev, "DWC_otg: %s: %s, channel %d\n", + __func__, (chan->ep_is_in ? "IN" : "OUT"), chnum); + dev_vdbg(hsotg->dev, " chan->start_pkt_count %d\n", + chan->start_pkt_count); + dev_vdbg(hsotg->dev, " hctsiz.pktcnt %d\n", + (hctsiz & TSIZ_PKTCNT_MASK) >> TSIZ_PKTCNT_SHIFT); + dev_vdbg(hsotg->dev, " chan->max_packet %d\n", chan->max_packet); + dev_vdbg(hsotg->dev, " bytes_transferred %d\n", + xfer_length); + dev_vdbg(hsotg->dev, " urb->actual_length %d\n", + urb->actual_length); + dev_vdbg(hsotg->dev, " urb->transfer_buffer_length %d\n", + urb->length); +} + +/* + * Handles a host channel NAK interrupt. This handler may be called in either + * DMA mode or Slave mode. + */ +static void dwc2_hc_nak_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: NAK Received--\n", + chnum); + + /* + * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and + * interrupt. Re-start the SSPLIT transfer. + */ + if (chan->do_split) { + if (chan->complete_split) + qtd->error_count = 0; + qtd->complete_split = 0; + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK); + goto handle_nak_done; + } + + switch (dwc2_hcd_get_pipe_type(&qtd->urb->pipe_info)) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + if (hsotg->core_params->dma_enable > 0 && chan->ep_is_in) { + /* + * NAK interrupts are enabled on bulk/control IN + * transfers in DMA mode for the sole purpose of + * resetting the error count after a transaction error + * occurs. The core will continue transferring data. + */ + qtd->error_count = 0; + break; + } + + /* + * NAK interrupts normally occur during OUT transfers in DMA + * or Slave mode. For IN transfers, more requests will be + * queued as request queue space is available. + */ + qtd->error_count = 0; + + if (!chan->qh->ping_state) { + dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb, + qtd, DWC2_HC_XFER_NAK); + dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd); + + if (chan->speed == USB_SPEED_HIGH) + chan->qh->ping_state = 1; + } + + /* + * Halt the channel so the transfer can be re-started from + * the appropriate point or the PING protocol will + * start/continue + */ + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK); + break; + case USB_ENDPOINT_XFER_INT: + qtd->error_count = 0; + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NAK); + break; + case USB_ENDPOINT_XFER_ISOC: + /* Should never get called for isochronous transfers */ + dev_err(hsotg->dev, "NACK interrupt for ISOC transfer\n"); + break; + } + +handle_nak_done: + disable_hc_int(hsotg, chnum, HCINTMSK_NAK); +} + +/* + * Handles a host channel ACK interrupt. This interrupt is enabled when + * performing the PING protocol in Slave mode, when errors occur during + * either Slave mode or DMA mode, and during Start Split transactions. + */ +static void dwc2_hc_ack_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + struct dwc2_hcd_iso_packet_desc *frame_desc; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: ACK Received--\n", + chnum); + + if (chan->do_split) { + /* Handle ACK on SSPLIT. ACK should not occur in CSPLIT. */ + if (!chan->ep_is_in && + chan->data_pid_start != DWC2_HC_PID_SETUP) + qtd->ssplit_out_xfer_count = chan->xfer_len; + + if (chan->ep_type != USB_ENDPOINT_XFER_ISOC || chan->ep_is_in) { + qtd->complete_split = 1; + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_ACK); + } else { + /* ISOC OUT */ + switch (chan->xact_pos) { + case DWC2_HCSPLT_XACTPOS_ALL: + break; + case DWC2_HCSPLT_XACTPOS_END: + qtd->isoc_split_pos = DWC2_HCSPLT_XACTPOS_ALL; + qtd->isoc_split_offset = 0; + break; + case DWC2_HCSPLT_XACTPOS_BEGIN: + case DWC2_HCSPLT_XACTPOS_MID: + /* + * For BEGIN or MID, calculate the length for + * the next microframe to determine the correct + * SSPLIT token, either MID or END + */ + frame_desc = &qtd->urb->iso_descs[ + qtd->isoc_frame_index]; + qtd->isoc_split_offset += 188; + + if (frame_desc->length - qtd->isoc_split_offset + <= 188) + qtd->isoc_split_pos = + DWC2_HCSPLT_XACTPOS_END; + else + qtd->isoc_split_pos = + DWC2_HCSPLT_XACTPOS_MID; + break; + } + } + } else { + qtd->error_count = 0; + + if (chan->qh->ping_state) { + chan->qh->ping_state = 0; + /* + * Halt the channel so the transfer can be re-started + * from the appropriate point. This only happens in + * Slave mode. In DMA mode, the ping_state is cleared + * when the transfer is started because the core + * automatically executes the PING, then the transfer. + */ + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_ACK); + } + } + + /* + * If the ACK occurred when _not_ in the PING state, let the channel + * continue transferring data after clearing the error count + */ + disable_hc_int(hsotg, chnum, HCINTMSK_ACK); +} + +/* + * Handles a host channel NYET interrupt. This interrupt should only occur on + * Bulk and Control OUT endpoints and for complete split transactions. If a + * NYET occurs at the same time as a Transfer Complete interrupt, it is + * handled in the xfercomp interrupt handler, not here. This handler may be + * called in either DMA mode or Slave mode. + */ +static void dwc2_hc_nyet_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: NYET Received--\n", + chnum); + + /* + * NYET on CSPLIT + * re-do the CSPLIT immediately on non-periodic + */ + if (chan->do_split && chan->complete_split) { + if (chan->ep_is_in && chan->ep_type == USB_ENDPOINT_XFER_ISOC && + hsotg->core_params->dma_enable > 0) { + qtd->complete_split = 0; + qtd->isoc_split_offset = 0; + qtd->isoc_frame_index++; + if (qtd->urb && + qtd->isoc_frame_index == qtd->urb->packet_count) { + dwc2_host_complete(hsotg, qtd, 0); + dwc2_release_channel(hsotg, chan, qtd, + DWC2_HC_XFER_URB_COMPLETE); + } else { + dwc2_release_channel(hsotg, chan, qtd, + DWC2_HC_XFER_NO_HALT_STATUS); + } + goto handle_nyet_done; + } + + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) { + int frnum = dwc2_hcd_get_frame_number(hsotg); + + if (dwc2_full_frame_num(frnum) != + dwc2_full_frame_num(chan->qh->sched_frame)) { + /* + * No longer in the same full speed frame. + * Treat this as a transaction error. + */ +#if 0 + /* + * Todo: Fix system performance so this can + * be treated as an error. Right now complete + * splits cannot be scheduled precisely enough + * due to other system activity, so this error + * occurs regularly in Slave mode. + */ + qtd->error_count++; +#endif + qtd->complete_split = 0; + dwc2_halt_channel(hsotg, chan, qtd, + DWC2_HC_XFER_XACT_ERR); + /* Todo: add support for isoc release */ + goto handle_nyet_done; + } + } + + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NYET); + goto handle_nyet_done; + } + + chan->qh->ping_state = 1; + qtd->error_count = 0; + + dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb, qtd, + DWC2_HC_XFER_NYET); + dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd); + + /* + * Halt the channel and re-start the transfer so the PING protocol + * will start + */ + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_NYET); + +handle_nyet_done: + disable_hc_int(hsotg, chnum, HCINTMSK_NYET); +} + +/* + * Handles a host channel babble interrupt. This handler may be called in + * either DMA mode or Slave mode. + */ +static void dwc2_hc_babble_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: Babble Error--\n", + chnum); + + dwc2_hc_handle_tt_clear(hsotg, chan, qtd); + + if (hsotg->core_params->dma_desc_enable > 0) { + dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum, + DWC2_HC_XFER_BABBLE_ERR); + goto disable_int; + } + + if (chan->ep_type != USB_ENDPOINT_XFER_ISOC) { + dwc2_host_complete(hsotg, qtd, -EOVERFLOW); + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_BABBLE_ERR); + } else { + enum dwc2_halt_status halt_status; + + halt_status = dwc2_update_isoc_urb_state(hsotg, chan, chnum, + qtd, DWC2_HC_XFER_BABBLE_ERR); + dwc2_halt_channel(hsotg, chan, qtd, halt_status); + } + +disable_int: + disable_hc_int(hsotg, chnum, HCINTMSK_BBLERR); +} + +/* + * Handles a host channel AHB error interrupt. This handler is only called in + * DMA mode. + */ +static void dwc2_hc_ahberr_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + struct dwc2_hcd_urb *urb = qtd->urb; + char *pipetype, *speed; + u32 hcchar; + u32 hcsplt; + u32 hctsiz; + u32 hc_dma; + + dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: AHB Error--\n", + chnum); + + if (!urb) + goto handle_ahberr_halt; + + dwc2_hc_handle_tt_clear(hsotg, chan, qtd); + + hcchar = readl(hsotg->regs + HCCHAR(chnum)); + hcsplt = readl(hsotg->regs + HCSPLT(chnum)); + hctsiz = readl(hsotg->regs + HCTSIZ(chnum)); + hc_dma = readl(hsotg->regs + HCDMA(chnum)); + + dev_err(hsotg->dev, "AHB ERROR, Channel %d\n", chnum); + dev_err(hsotg->dev, " hcchar 0x%08x, hcsplt 0x%08x\n", hcchar, hcsplt); + dev_err(hsotg->dev, " hctsiz 0x%08x, hc_dma 0x%08x\n", hctsiz, hc_dma); + dev_err(hsotg->dev, " Device address: %d\n", + dwc2_hcd_get_dev_addr(&urb->pipe_info)); + dev_err(hsotg->dev, " Endpoint: %d, %s\n", + dwc2_hcd_get_ep_num(&urb->pipe_info), + dwc2_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT"); + + switch (dwc2_hcd_get_pipe_type(&urb->pipe_info)) { + case USB_ENDPOINT_XFER_CONTROL: + pipetype = "CONTROL"; + break; + case USB_ENDPOINT_XFER_BULK: + pipetype = "BULK"; + break; + case USB_ENDPOINT_XFER_INT: + pipetype = "INTERRUPT"; + break; + case USB_ENDPOINT_XFER_ISOC: + pipetype = "ISOCHRONOUS"; + break; + default: + pipetype = "UNKNOWN"; + break; + } + + dev_err(hsotg->dev, " Endpoint type: %s\n", pipetype); + + switch (chan->speed) { + case USB_SPEED_HIGH: + speed = "HIGH"; + break; + case USB_SPEED_FULL: + speed = "FULL"; + break; + case USB_SPEED_LOW: + speed = "LOW"; + break; + default: + speed = "UNKNOWN"; + break; + } + + dev_err(hsotg->dev, " Speed: %s\n", speed); + + dev_err(hsotg->dev, " Max packet size: %d\n", + dwc2_hcd_get_mps(&urb->pipe_info)); + dev_err(hsotg->dev, " Data buffer length: %d\n", urb->length); + dev_err(hsotg->dev, " Transfer buffer: %p, Transfer DMA: %08lx\n", + urb->buf, (unsigned long)urb->dma); + dev_err(hsotg->dev, " Setup buffer: %p, Setup DMA: %08lx\n", + urb->setup_packet, (unsigned long)urb->setup_dma); + dev_err(hsotg->dev, " Interval: %d\n", urb->interval); + + /* Core halts the channel for Descriptor DMA mode */ + if (hsotg->core_params->dma_desc_enable > 0) { + dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum, + DWC2_HC_XFER_AHB_ERR); + goto handle_ahberr_done; + } + + dwc2_host_complete(hsotg, qtd, -EIO); + +handle_ahberr_halt: + /* + * Force a channel halt. Don't call dwc2_halt_channel because that won't + * write to the HCCHARn register in DMA mode to force the halt. + */ + dwc2_hc_halt(hsotg, chan, DWC2_HC_XFER_AHB_ERR); + +handle_ahberr_done: + disable_hc_int(hsotg, chnum, HCINTMSK_AHBERR); +} + +/* + * Handles a host channel transaction error interrupt. This handler may be + * called in either DMA mode or Slave mode. + */ +static void dwc2_hc_xacterr_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + dev_dbg(hsotg->dev, + "--Host Channel %d Interrupt: Transaction Error--\n", chnum); + + dwc2_hc_handle_tt_clear(hsotg, chan, qtd); + + if (hsotg->core_params->dma_desc_enable > 0) { + dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum, + DWC2_HC_XFER_XACT_ERR); + goto handle_xacterr_done; + } + + switch (dwc2_hcd_get_pipe_type(&qtd->urb->pipe_info)) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + qtd->error_count++; + if (!chan->qh->ping_state) { + + dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb, + qtd, DWC2_HC_XFER_XACT_ERR); + dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd); + if (!chan->ep_is_in && chan->speed == USB_SPEED_HIGH) + chan->qh->ping_state = 1; + } + + /* + * Halt the channel so the transfer can be re-started from + * the appropriate point or the PING protocol will start + */ + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_XACT_ERR); + break; + case USB_ENDPOINT_XFER_INT: + qtd->error_count++; + if (chan->do_split && chan->complete_split) + qtd->complete_split = 0; + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_XACT_ERR); + break; + case USB_ENDPOINT_XFER_ISOC: + { + enum dwc2_halt_status halt_status; + + halt_status = dwc2_update_isoc_urb_state(hsotg, chan, + chnum, qtd, DWC2_HC_XFER_XACT_ERR); + dwc2_halt_channel(hsotg, chan, qtd, halt_status); + } + break; + } + +handle_xacterr_done: + disable_hc_int(hsotg, chnum, HCINTMSK_XACTERR); +} + +/* + * Handles a host channel frame overrun interrupt. This handler may be called + * in either DMA mode or Slave mode. + */ +static void dwc2_hc_frmovrun_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + enum dwc2_halt_status halt_status; + + if (dbg_hc(chan)) + dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: Frame Overrun--\n", + chnum); + + dwc2_hc_handle_tt_clear(hsotg, chan, qtd); + + switch (dwc2_hcd_get_pipe_type(&qtd->urb->pipe_info)) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + break; + case USB_ENDPOINT_XFER_INT: + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_FRAME_OVERRUN); + break; + case USB_ENDPOINT_XFER_ISOC: + halt_status = dwc2_update_isoc_urb_state(hsotg, chan, chnum, + qtd, DWC2_HC_XFER_FRAME_OVERRUN); + dwc2_halt_channel(hsotg, chan, qtd, halt_status); + break; + } + + disable_hc_int(hsotg, chnum, HCINTMSK_FRMOVRUN); +} + +/* + * Handles a host channel data toggle error interrupt. This handler may be + * called in either DMA mode or Slave mode. + */ +static void dwc2_hc_datatglerr_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + dev_dbg(hsotg->dev, + "--Host Channel %d Interrupt: Data Toggle Error--\n", chnum); + + if (chan->ep_is_in) + qtd->error_count = 0; + else + dev_err(hsotg->dev, + "Data Toggle Error on OUT transfer, channel %d\n", + chnum); + + dwc2_hc_handle_tt_clear(hsotg, chan, qtd); + disable_hc_int(hsotg, chnum, HCINTMSK_DATATGLERR); +} + +/* + * For debug only. It checks that a valid halt status is set and that + * HCCHARn.chdis is clear. If there's a problem, corrective action is + * taken and a warning is issued. + * + * Return: true if halt status is ok, false otherwise + */ +static bool dwc2_halt_status_ok(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ +#ifdef DEBUG + u32 hcchar; + u32 hctsiz; + u32 hcintmsk; + u32 hcsplt; + + if (chan->halt_status == DWC2_HC_XFER_NO_HALT_STATUS) { + /* + * This code is here only as a check. This condition should + * never happen. Ignore the halt if it does occur. + */ + hcchar = readl(hsotg->regs + HCCHAR(chnum)); + hctsiz = readl(hsotg->regs + HCTSIZ(chnum)); + hcintmsk = readl(hsotg->regs + HCINTMSK(chnum)); + hcsplt = readl(hsotg->regs + HCSPLT(chnum)); + dev_dbg(hsotg->dev, + "%s: chan->halt_status DWC2_HC_XFER_NO_HALT_STATUS,\n", + __func__); + dev_dbg(hsotg->dev, + "channel %d, hcchar 0x%08x, hctsiz 0x%08x,\n", + chnum, hcchar, hctsiz); + dev_dbg(hsotg->dev, + "hcint 0x%08x, hcintmsk 0x%08x, hcsplt 0x%08x,\n", + chan->hcint, hcintmsk, hcsplt); + if (qtd) + dev_dbg(hsotg->dev, "qtd->complete_split %d\n", + qtd->complete_split); + dev_warn(hsotg->dev, + "%s: no halt status, channel %d, ignoring interrupt\n", + __func__, chnum); + return false; + } + + /* + * This code is here only as a check. hcchar.chdis should never be set + * when the halt interrupt occurs. Halt the channel again if it does + * occur. + */ + hcchar = readl(hsotg->regs + HCCHAR(chnum)); + if (hcchar & HCCHAR_CHDIS) { + dev_warn(hsotg->dev, + "%s: hcchar.chdis set unexpectedly, hcchar 0x%08x, trying to halt again\n", + __func__, hcchar); + chan->halt_pending = 0; + dwc2_halt_channel(hsotg, chan, qtd, chan->halt_status); + return false; + } +#endif + + return true; +} + +/* + * Handles a host Channel Halted interrupt in DMA mode. This handler + * determines the reason the channel halted and proceeds accordingly. + */ +static void dwc2_hc_chhltd_intr_dma(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + u32 hcintmsk; + int out_nak_enh = 0; + + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, + "--Host Channel %d Interrupt: DMA Channel Halted--\n", + chnum); + + /* + * For core with OUT NAK enhancement, the flow for high-speed + * CONTROL/BULK OUT is handled a little differently + */ + if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_2_71a) { + if (chan->speed == USB_SPEED_HIGH && !chan->ep_is_in && + (chan->ep_type == USB_ENDPOINT_XFER_CONTROL || + chan->ep_type == USB_ENDPOINT_XFER_BULK)) { + out_nak_enh = 1; + } + } + + if (chan->halt_status == DWC2_HC_XFER_URB_DEQUEUE || + (chan->halt_status == DWC2_HC_XFER_AHB_ERR && + hsotg->core_params->dma_desc_enable <= 0)) { + if (hsotg->core_params->dma_desc_enable > 0) + dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum, + chan->halt_status); + else + /* + * Just release the channel. A dequeue can happen on a + * transfer timeout. In the case of an AHB Error, the + * channel was forced to halt because there's no way to + * gracefully recover. + */ + dwc2_release_channel(hsotg, chan, qtd, + chan->halt_status); + return; + } + + hcintmsk = readl(hsotg->regs + HCINTMSK(chnum)); + + if (chan->hcint & HCINTMSK_XFERCOMPL) { + /* + * Todo: This is here because of a possible hardware bug. Spec + * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT + * interrupt w/ACK bit set should occur, but I only see the + * XFERCOMP bit, even with it masked out. This is a workaround + * for that behavior. Should fix this when hardware is fixed. + */ + if (chan->ep_type == USB_ENDPOINT_XFER_ISOC && !chan->ep_is_in) + dwc2_hc_ack_intr(hsotg, chan, chnum, qtd); + dwc2_hc_xfercomp_intr(hsotg, chan, chnum, qtd); + } else if (chan->hcint & HCINTMSK_STALL) { + dwc2_hc_stall_intr(hsotg, chan, chnum, qtd); + } else if ((chan->hcint & HCINTMSK_XACTERR) && + hsotg->core_params->dma_desc_enable <= 0) { + if (out_nak_enh) { + if (chan->hcint & + (HCINTMSK_NYET | HCINTMSK_NAK | HCINTMSK_ACK)) { + dev_vdbg(hsotg->dev, + "XactErr with NYET/NAK/ACK\n"); + qtd->error_count = 0; + } else { + dev_vdbg(hsotg->dev, + "XactErr without NYET/NAK/ACK\n"); + } + } + + /* + * Must handle xacterr before nak or ack. Could get a xacterr + * at the same time as either of these on a BULK/CONTROL OUT + * that started with a PING. The xacterr takes precedence. + */ + dwc2_hc_xacterr_intr(hsotg, chan, chnum, qtd); + } else if ((chan->hcint & HCINTMSK_XCS_XACT) && + hsotg->core_params->dma_desc_enable > 0) { + dwc2_hc_xacterr_intr(hsotg, chan, chnum, qtd); + } else if ((chan->hcint & HCINTMSK_AHBERR) && + hsotg->core_params->dma_desc_enable > 0) { + dwc2_hc_ahberr_intr(hsotg, chan, chnum, qtd); + } else if (chan->hcint & HCINTMSK_BBLERR) { + dwc2_hc_babble_intr(hsotg, chan, chnum, qtd); + } else if (chan->hcint & HCINTMSK_FRMOVRUN) { + dwc2_hc_frmovrun_intr(hsotg, chan, chnum, qtd); + } else if (!out_nak_enh) { + if (chan->hcint & HCINTMSK_NYET) { + /* + * Must handle nyet before nak or ack. Could get a nyet + * at the same time as either of those on a BULK/CONTROL + * OUT that started with a PING. The nyet takes + * precedence. + */ + dwc2_hc_nyet_intr(hsotg, chan, chnum, qtd); + } else if ((chan->hcint & HCINTMSK_NAK) && + !(hcintmsk & HCINTMSK_NAK)) { + /* + * If nak is not masked, it's because a non-split IN + * transfer is in an error state. In that case, the nak + * is handled by the nak interrupt handler, not here. + * Handle nak here for BULK/CONTROL OUT transfers, which + * halt on a NAK to allow rewinding the buffer pointer. + */ + dwc2_hc_nak_intr(hsotg, chan, chnum, qtd); + } else if ((chan->hcint & HCINTMSK_ACK) && + !(hcintmsk & HCINTMSK_ACK)) { + /* + * If ack is not masked, it's because a non-split IN + * transfer is in an error state. In that case, the ack + * is handled by the ack interrupt handler, not here. + * Handle ack here for split transfers. Start splits + * halt on ACK. + */ + dwc2_hc_ack_intr(hsotg, chan, chnum, qtd); + } else { + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) { + /* + * A periodic transfer halted with no other + * channel interrupts set. Assume it was halted + * by the core because it could not be completed + * in its scheduled (micro)frame. + */ + dev_dbg(hsotg->dev, + "%s: Halt channel %d (assume incomplete periodic transfer)\n", + __func__, chnum); + dwc2_halt_channel(hsotg, chan, qtd, + DWC2_HC_XFER_PERIODIC_INCOMPLETE); + } else { + dev_err(hsotg->dev, + "%s: Channel %d - ChHltd set, but reason is unknown\n", + __func__, chnum); + dev_err(hsotg->dev, + "hcint 0x%08x, intsts 0x%08x\n", + chan->hcint, + readl(hsotg->regs + GINTSTS)); + goto error; + } + } + } else { + dev_info(hsotg->dev, + "NYET/NAK/ACK/other in non-error case, 0x%08x\n", + chan->hcint); +error: + /* Failthrough: use 3-strikes rule */ + qtd->error_count++; + dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb, + qtd, DWC2_HC_XFER_XACT_ERR); + dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd); + dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_XACT_ERR); + } +} + +/* + * Handles a host channel Channel Halted interrupt + * + * In slave mode, this handler is called only when the driver specifically + * requests a halt. This occurs during handling other host channel interrupts + * (e.g. nak, xacterr, stall, nyet, etc.). + * + * In DMA mode, this is the interrupt that occurs when the core has finished + * processing a transfer on a channel. Other host channel interrupts (except + * ahberr) are disabled in DMA mode. + */ +static void dwc2_hc_chhltd_intr(struct dwc2_hsotg *hsotg, + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) +{ + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "--Host Channel %d Interrupt: Channel Halted--\n", + chnum); + + if (hsotg->core_params->dma_enable > 0) { + dwc2_hc_chhltd_intr_dma(hsotg, chan, chnum, qtd); + } else { + if (!dwc2_halt_status_ok(hsotg, chan, chnum, qtd)) + return; + dwc2_release_channel(hsotg, chan, qtd, chan->halt_status); + } +} + +/* Handles interrupt for a specific Host Channel */ +static void dwc2_hc_n_intr(struct dwc2_hsotg *hsotg, int chnum) +{ + struct dwc2_qtd *qtd; + struct dwc2_host_chan *chan; + u32 hcint, hcintmsk; + + chan = hsotg->hc_ptr_array[chnum]; + + hcint = readl(hsotg->regs + HCINT(chnum)); + hcintmsk = readl(hsotg->regs + HCINTMSK(chnum)); + if (!chan) { + dev_err(hsotg->dev, "## hc_ptr_array for channel is NULL ##\n"); + writel(hcint, hsotg->regs + HCINT(chnum)); + return; + } + + if (dbg_hc(chan)) { + dev_vdbg(hsotg->dev, "--Host Channel Interrupt--, Channel %d\n", + chnum); + dev_vdbg(hsotg->dev, + " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n", + hcint, hcintmsk, hcint & hcintmsk); + } + + writel(hcint, hsotg->regs + HCINT(chnum)); + chan->hcint = hcint; + hcint &= hcintmsk; + + /* + * If the channel was halted due to a dequeue, the qtd list might + * be empty or at least the first entry will not be the active qtd. + * In this case, take a shortcut and just release the channel. + */ + if (chan->halt_status == DWC2_HC_XFER_URB_DEQUEUE) { + /* + * If the channel was halted, this should be the only + * interrupt unmasked + */ + WARN_ON(hcint != HCINTMSK_CHHLTD); + if (hsotg->core_params->dma_desc_enable > 0) + dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum, + chan->halt_status); + else + dwc2_release_channel(hsotg, chan, NULL, + chan->halt_status); + return; + } + + if (list_empty(&chan->qh->qtd_list)) { + /* + * TODO: Will this ever happen with the + * DWC2_HC_XFER_URB_DEQUEUE handling above? + */ + dev_dbg(hsotg->dev, "## no QTD queued for channel %d ##\n", + chnum); + dev_dbg(hsotg->dev, + " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n", + chan->hcint, hcintmsk, hcint); + chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS; + disable_hc_int(hsotg, chnum, HCINTMSK_CHHLTD); + chan->hcint = 0; + return; + } + + qtd = list_first_entry(&chan->qh->qtd_list, struct dwc2_qtd, + qtd_list_entry); + + if (hsotg->core_params->dma_enable <= 0) { + if ((hcint & HCINTMSK_CHHLTD) && hcint != HCINTMSK_CHHLTD) + hcint &= ~HCINTMSK_CHHLTD; + } + + if (hcint & HCINTMSK_XFERCOMPL) { + dwc2_hc_xfercomp_intr(hsotg, chan, chnum, qtd); + /* + * If NYET occurred at same time as Xfer Complete, the NYET is + * handled by the Xfer Complete interrupt handler. Don't want + * to call the NYET interrupt handler in this case. + */ + hcint &= ~HCINTMSK_NYET; + } + if (hcint & HCINTMSK_CHHLTD) + dwc2_hc_chhltd_intr(hsotg, chan, chnum, qtd); + if (hcint & HCINTMSK_AHBERR) + dwc2_hc_ahberr_intr(hsotg, chan, chnum, qtd); + if (hcint & HCINTMSK_STALL) + dwc2_hc_stall_intr(hsotg, chan, chnum, qtd); + if (hcint & HCINTMSK_NAK) + dwc2_hc_nak_intr(hsotg, chan, chnum, qtd); + if (hcint & HCINTMSK_ACK) + dwc2_hc_ack_intr(hsotg, chan, chnum, qtd); + if (hcint & HCINTMSK_NYET) + dwc2_hc_nyet_intr(hsotg, chan, chnum, qtd); + if (hcint & HCINTMSK_XACTERR) + dwc2_hc_xacterr_intr(hsotg, chan, chnum, qtd); + if (hcint & HCINTMSK_BBLERR) + dwc2_hc_babble_intr(hsotg, chan, chnum, qtd); + if (hcint & HCINTMSK_FRMOVRUN) + dwc2_hc_frmovrun_intr(hsotg, chan, chnum, qtd); + if (hcint & HCINTMSK_DATATGLERR) + dwc2_hc_datatglerr_intr(hsotg, chan, chnum, qtd); + + chan->hcint = 0; +} + +/* + * This interrupt indicates that one or more host channels has a pending + * interrupt. There are multiple conditions that can cause each host channel + * interrupt. This function determines which conditions have occurred for each + * host channel interrupt and handles them appropriately. + */ +static void dwc2_hc_intr(struct dwc2_hsotg *hsotg) +{ + u32 haint; + int i; + + haint = readl(hsotg->regs + HAINT); + if (dbg_perio()) { + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + dev_vdbg(hsotg->dev, "HAINT=%08x\n", haint); + } + + for (i = 0; i < hsotg->core_params->host_channels; i++) { + if (haint & (1 << i)) + dwc2_hc_n_intr(hsotg, i); + } +} + +/* This function handles interrupts for the HCD */ +irqreturn_t dwc2_handle_hcd_intr(struct dwc2_hsotg *hsotg) +{ + u32 gintsts, dbg_gintsts; + irqreturn_t retval = IRQ_NONE; + + if (!dwc2_is_controller_alive(hsotg)) { + dev_warn(hsotg->dev, "Controller is dead\n"); + return retval; + } + + spin_lock(&hsotg->lock); + + /* Check if HOST Mode */ + if (dwc2_is_host_mode(hsotg)) { + gintsts = dwc2_read_core_intr(hsotg); + if (!gintsts) { + spin_unlock(&hsotg->lock); + return retval; + } + + retval = IRQ_HANDLED; + + dbg_gintsts = gintsts; +#ifndef DEBUG_SOF + dbg_gintsts &= ~GINTSTS_SOF; +#endif + if (!dbg_perio()) + dbg_gintsts &= ~(GINTSTS_HCHINT | GINTSTS_RXFLVL | + GINTSTS_PTXFEMP); + + /* Only print if there are any non-suppressed interrupts left */ + if (dbg_gintsts) + dev_vdbg(hsotg->dev, + "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n", + gintsts); + + if (gintsts & GINTSTS_SOF) + dwc2_sof_intr(hsotg); + if (gintsts & GINTSTS_RXFLVL) + dwc2_rx_fifo_level_intr(hsotg); + if (gintsts & GINTSTS_NPTXFEMP) + dwc2_np_tx_fifo_empty_intr(hsotg); + if (gintsts & GINTSTS_PRTINT) + dwc2_port_intr(hsotg); + if (gintsts & GINTSTS_HCHINT) + dwc2_hc_intr(hsotg); + if (gintsts & GINTSTS_PTXFEMP) + dwc2_perio_tx_fifo_empty_intr(hsotg); + + if (dbg_gintsts) { + dev_vdbg(hsotg->dev, + "DWC OTG HCD Finished Servicing Interrupts\n"); + dev_vdbg(hsotg->dev, + "DWC OTG HCD gintsts=0x%08x gintmsk=0x%08x\n", + readl(hsotg->regs + GINTSTS), + readl(hsotg->regs + GINTMSK)); + } + } + + spin_unlock(&hsotg->lock); + + return retval; +} diff --git a/kernel/drivers/usb/dwc2/hcd_queue.c b/kernel/drivers/usb/dwc2/hcd_queue.c new file mode 100644 index 000000000..bb97838bc --- /dev/null +++ b/kernel/drivers/usb/dwc2/hcd_queue.c @@ -0,0 +1,827 @@ +/* + * hcd_queue.c - DesignWare HS OTG Controller host queuing routines + * + * Copyright (C) 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * This file contains the functions to manage Queue Heads and Queue + * Transfer Descriptors for Host mode + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/usb.h> + +#include <linux/usb/hcd.h> +#include <linux/usb/ch11.h> + +#include "core.h" +#include "hcd.h" + +/** + * dwc2_qh_init() - Initializes a QH structure + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: The QH to init + * @urb: Holds the information about the device/endpoint needed to initialize + * the QH + */ +#define SCHEDULE_SLOP 10 +static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, + struct dwc2_hcd_urb *urb) +{ + int dev_speed, hub_addr, hub_port; + char *speed, *type; + + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + /* Initialize QH */ + qh->ep_type = dwc2_hcd_get_pipe_type(&urb->pipe_info); + qh->ep_is_in = dwc2_hcd_is_pipe_in(&urb->pipe_info) ? 1 : 0; + + qh->data_toggle = DWC2_HC_PID_DATA0; + qh->maxp = dwc2_hcd_get_mps(&urb->pipe_info); + INIT_LIST_HEAD(&qh->qtd_list); + INIT_LIST_HEAD(&qh->qh_list_entry); + + /* FS/LS Endpoint on HS Hub, NOT virtual root hub */ + dev_speed = dwc2_host_get_speed(hsotg, urb->priv); + + dwc2_host_hub_info(hsotg, urb->priv, &hub_addr, &hub_port); + + if ((dev_speed == USB_SPEED_LOW || dev_speed == USB_SPEED_FULL) && + hub_addr != 0 && hub_addr != 1) { + dev_vdbg(hsotg->dev, + "QH init: EP %d: TT found at hub addr %d, for port %d\n", + dwc2_hcd_get_ep_num(&urb->pipe_info), hub_addr, + hub_port); + qh->do_split = 1; + } + + if (qh->ep_type == USB_ENDPOINT_XFER_INT || + qh->ep_type == USB_ENDPOINT_XFER_ISOC) { + /* Compute scheduling parameters once and save them */ + u32 hprt, prtspd; + + /* Todo: Account for split transfers in the bus time */ + int bytecount = + dwc2_hb_mult(qh->maxp) * dwc2_max_packet(qh->maxp); + + qh->usecs = NS_TO_US(usb_calc_bus_time(qh->do_split ? + USB_SPEED_HIGH : dev_speed, qh->ep_is_in, + qh->ep_type == USB_ENDPOINT_XFER_ISOC, + bytecount)); + /* Start in a slightly future (micro)frame */ + qh->sched_frame = dwc2_frame_num_inc(hsotg->frame_number, + SCHEDULE_SLOP); + qh->interval = urb->interval; +#if 0 + /* Increase interrupt polling rate for debugging */ + if (qh->ep_type == USB_ENDPOINT_XFER_INT) + qh->interval = 8; +#endif + hprt = readl(hsotg->regs + HPRT0); + prtspd = (hprt & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; + if (prtspd == HPRT0_SPD_HIGH_SPEED && + (dev_speed == USB_SPEED_LOW || + dev_speed == USB_SPEED_FULL)) { + qh->interval *= 8; + qh->sched_frame |= 0x7; + qh->start_split_frame = qh->sched_frame; + } + dev_dbg(hsotg->dev, "interval=%d\n", qh->interval); + } + + dev_vdbg(hsotg->dev, "DWC OTG HCD QH Initialized\n"); + dev_vdbg(hsotg->dev, "DWC OTG HCD QH - qh = %p\n", qh); + dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Device Address = %d\n", + dwc2_hcd_get_dev_addr(&urb->pipe_info)); + dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Endpoint %d, %s\n", + dwc2_hcd_get_ep_num(&urb->pipe_info), + dwc2_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT"); + + qh->dev_speed = dev_speed; + + switch (dev_speed) { + case USB_SPEED_LOW: + speed = "low"; + break; + case USB_SPEED_FULL: + speed = "full"; + break; + case USB_SPEED_HIGH: + speed = "high"; + break; + default: + speed = "?"; + break; + } + dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Speed = %s\n", speed); + + switch (qh->ep_type) { + case USB_ENDPOINT_XFER_ISOC: + type = "isochronous"; + break; + case USB_ENDPOINT_XFER_INT: + type = "interrupt"; + break; + case USB_ENDPOINT_XFER_CONTROL: + type = "control"; + break; + case USB_ENDPOINT_XFER_BULK: + type = "bulk"; + break; + default: + type = "?"; + break; + } + + dev_vdbg(hsotg->dev, "DWC OTG HCD QH - Type = %s\n", type); + + if (qh->ep_type == USB_ENDPOINT_XFER_INT) { + dev_vdbg(hsotg->dev, "DWC OTG HCD QH - usecs = %d\n", + qh->usecs); + dev_vdbg(hsotg->dev, "DWC OTG HCD QH - interval = %d\n", + qh->interval); + } +} + +/** + * dwc2_hcd_qh_create() - Allocates and initializes a QH + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @urb: Holds the information about the device/endpoint needed + * to initialize the QH + * @atomic_alloc: Flag to do atomic allocation if needed + * + * Return: Pointer to the newly allocated QH, or NULL on error + */ +static struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg, + struct dwc2_hcd_urb *urb, + gfp_t mem_flags) +{ + struct dwc2_qh *qh; + + if (!urb->priv) + return NULL; + + /* Allocate memory */ + qh = kzalloc(sizeof(*qh), mem_flags); + if (!qh) + return NULL; + + dwc2_qh_init(hsotg, qh, urb); + + if (hsotg->core_params->dma_desc_enable > 0 && + dwc2_hcd_qh_init_ddma(hsotg, qh, mem_flags) < 0) { + dwc2_hcd_qh_free(hsotg, qh); + return NULL; + } + + return qh; +} + +/** + * dwc2_hcd_qh_free() - Frees the QH + * + * @hsotg: HCD instance + * @qh: The QH to free + * + * QH should already be removed from the list. QTD list should already be empty + * if called from URB Dequeue. + * + * Must NOT be called with interrupt disabled or spinlock held + */ +void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + if (hsotg->core_params->dma_desc_enable > 0) + dwc2_hcd_qh_free_ddma(hsotg, qh); + else if (qh->dw_align_buf) + dma_free_coherent(hsotg->dev, qh->dw_align_buf_size, + qh->dw_align_buf, qh->dw_align_buf_dma); + kfree(qh); +} + +/** + * dwc2_periodic_channel_available() - Checks that a channel is available for a + * periodic transfer + * + * @hsotg: The HCD state structure for the DWC OTG controller + * + * Return: 0 if successful, negative error code otherwise + */ +static int dwc2_periodic_channel_available(struct dwc2_hsotg *hsotg) +{ + /* + * Currently assuming that there is a dedicated host channel for + * each periodic transaction plus at least one host channel for + * non-periodic transactions + */ + int status; + int num_channels; + + num_channels = hsotg->core_params->host_channels; + if (hsotg->periodic_channels + hsotg->non_periodic_channels < + num_channels + && hsotg->periodic_channels < num_channels - 1) { + status = 0; + } else { + dev_dbg(hsotg->dev, + "%s: Total channels: %d, Periodic: %d, " + "Non-periodic: %d\n", __func__, num_channels, + hsotg->periodic_channels, hsotg->non_periodic_channels); + status = -ENOSPC; + } + + return status; +} + +/** + * dwc2_check_periodic_bandwidth() - Checks that there is sufficient bandwidth + * for the specified QH in the periodic schedule + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: QH containing periodic bandwidth required + * + * Return: 0 if successful, negative error code otherwise + * + * For simplicity, this calculation assumes that all the transfers in the + * periodic schedule may occur in the same (micro)frame + */ +static int dwc2_check_periodic_bandwidth(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh) +{ + int status; + s16 max_claimed_usecs; + + status = 0; + + if (qh->dev_speed == USB_SPEED_HIGH || qh->do_split) { + /* + * High speed mode + * Max periodic usecs is 80% x 125 usec = 100 usec + */ + max_claimed_usecs = 100 - qh->usecs; + } else { + /* + * Full speed mode + * Max periodic usecs is 90% x 1000 usec = 900 usec + */ + max_claimed_usecs = 900 - qh->usecs; + } + + if (hsotg->periodic_usecs > max_claimed_usecs) { + dev_err(hsotg->dev, + "%s: already claimed usecs %d, required usecs %d\n", + __func__, hsotg->periodic_usecs, qh->usecs); + status = -ENOSPC; + } + + return status; +} + +/** + * Microframe scheduler + * track the total use in hsotg->frame_usecs + * keep each qh use in qh->frame_usecs + * when surrendering the qh then donate the time back + */ +static const unsigned short max_uframe_usecs[] = { + 100, 100, 100, 100, 100, 100, 30, 0 +}; + +void dwc2_hcd_init_usecs(struct dwc2_hsotg *hsotg) +{ + int i; + + for (i = 0; i < 8; i++) + hsotg->frame_usecs[i] = max_uframe_usecs[i]; +} + +static int dwc2_find_single_uframe(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + unsigned short utime = qh->usecs; + int i; + + for (i = 0; i < 8; i++) { + /* At the start hsotg->frame_usecs[i] = max_uframe_usecs[i] */ + if (utime <= hsotg->frame_usecs[i]) { + hsotg->frame_usecs[i] -= utime; + qh->frame_usecs[i] += utime; + return i; + } + } + return -ENOSPC; +} + +/* + * use this for FS apps that can span multiple uframes + */ +static int dwc2_find_multi_uframe(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + unsigned short utime = qh->usecs; + unsigned short xtime; + int t_left; + int i; + int j; + int k; + + for (i = 0; i < 8; i++) { + if (hsotg->frame_usecs[i] <= 0) + continue; + + /* + * we need n consecutive slots so use j as a start slot + * j plus j+1 must be enough time (for now) + */ + xtime = hsotg->frame_usecs[i]; + for (j = i + 1; j < 8; j++) { + /* + * if we add this frame remaining time to xtime we may + * be OK, if not we need to test j for a complete frame + */ + if (xtime + hsotg->frame_usecs[j] < utime) { + if (hsotg->frame_usecs[j] < + max_uframe_usecs[j]) + continue; + } + if (xtime >= utime) { + t_left = utime; + for (k = i; k < 8; k++) { + t_left -= hsotg->frame_usecs[k]; + if (t_left <= 0) { + qh->frame_usecs[k] += + hsotg->frame_usecs[k] + + t_left; + hsotg->frame_usecs[k] = -t_left; + return i; + } else { + qh->frame_usecs[k] += + hsotg->frame_usecs[k]; + hsotg->frame_usecs[k] = 0; + } + } + } + /* add the frame time to x time */ + xtime += hsotg->frame_usecs[j]; + /* we must have a fully available next frame or break */ + if (xtime < utime && + hsotg->frame_usecs[j] == max_uframe_usecs[j]) + continue; + } + } + return -ENOSPC; +} + +static int dwc2_find_uframe(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + int ret; + + if (qh->dev_speed == USB_SPEED_HIGH) { + /* if this is a hs transaction we need a full frame */ + ret = dwc2_find_single_uframe(hsotg, qh); + } else { + /* + * if this is a fs transaction we may need a sequence + * of frames + */ + ret = dwc2_find_multi_uframe(hsotg, qh); + } + return ret; +} + +/** + * dwc2_check_max_xfer_size() - Checks that the max transfer size allowed in a + * host channel is large enough to handle the maximum data transfer in a single + * (micro)frame for a periodic transfer + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: QH for a periodic endpoint + * + * Return: 0 if successful, negative error code otherwise + */ +static int dwc2_check_max_xfer_size(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh) +{ + u32 max_xfer_size; + u32 max_channel_xfer_size; + int status = 0; + + max_xfer_size = dwc2_max_packet(qh->maxp) * dwc2_hb_mult(qh->maxp); + max_channel_xfer_size = hsotg->core_params->max_transfer_size; + + if (max_xfer_size > max_channel_xfer_size) { + dev_err(hsotg->dev, + "%s: Periodic xfer length %d > max xfer length for channel %d\n", + __func__, max_xfer_size, max_channel_xfer_size); + status = -ENOSPC; + } + + return status; +} + +/** + * dwc2_schedule_periodic() - Schedules an interrupt or isochronous transfer in + * the periodic schedule + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: QH for the periodic transfer. The QH should already contain the + * scheduling information. + * + * Return: 0 if successful, negative error code otherwise + */ +static int dwc2_schedule_periodic(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + int status; + + if (hsotg->core_params->uframe_sched > 0) { + int frame = -1; + + status = dwc2_find_uframe(hsotg, qh); + if (status == 0) + frame = 7; + else if (status > 0) + frame = status - 1; + + /* Set the new frame up */ + if (frame >= 0) { + qh->sched_frame &= ~0x7; + qh->sched_frame |= (frame & 7); + } + + if (status > 0) + status = 0; + } else { + status = dwc2_periodic_channel_available(hsotg); + if (status) { + dev_info(hsotg->dev, + "%s: No host channel available for periodic transfer\n", + __func__); + return status; + } + + status = dwc2_check_periodic_bandwidth(hsotg, qh); + } + + if (status) { + dev_dbg(hsotg->dev, + "%s: Insufficient periodic bandwidth for periodic transfer\n", + __func__); + return status; + } + + status = dwc2_check_max_xfer_size(hsotg, qh); + if (status) { + dev_dbg(hsotg->dev, + "%s: Channel max transfer size too small for periodic transfer\n", + __func__); + return status; + } + + if (hsotg->core_params->dma_desc_enable > 0) + /* Don't rely on SOF and start in ready schedule */ + list_add_tail(&qh->qh_list_entry, &hsotg->periodic_sched_ready); + else + /* Always start in inactive schedule */ + list_add_tail(&qh->qh_list_entry, + &hsotg->periodic_sched_inactive); + + if (hsotg->core_params->uframe_sched <= 0) + /* Reserve periodic channel */ + hsotg->periodic_channels++; + + /* Update claimed usecs per (micro)frame */ + hsotg->periodic_usecs += qh->usecs; + + return status; +} + +/** + * dwc2_deschedule_periodic() - Removes an interrupt or isochronous transfer + * from the periodic schedule + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: QH for the periodic transfer + */ +static void dwc2_deschedule_periodic(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh) +{ + int i; + + list_del_init(&qh->qh_list_entry); + + /* Update claimed usecs per (micro)frame */ + hsotg->periodic_usecs -= qh->usecs; + + if (hsotg->core_params->uframe_sched > 0) { + for (i = 0; i < 8; i++) { + hsotg->frame_usecs[i] += qh->frame_usecs[i]; + qh->frame_usecs[i] = 0; + } + } else { + /* Release periodic channel reservation */ + hsotg->periodic_channels--; + } +} + +/** + * dwc2_hcd_qh_add() - Adds a QH to either the non periodic or periodic + * schedule if it is not already in the schedule. If the QH is already in + * the schedule, no action is taken. + * + * @hsotg: The HCD state structure for the DWC OTG controller + * @qh: The QH to add + * + * Return: 0 if successful, negative error code otherwise + */ +int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + int status; + u32 intr_mask; + + if (dbg_qh(qh)) + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + if (!list_empty(&qh->qh_list_entry)) + /* QH already in a schedule */ + return 0; + + /* Add the new QH to the appropriate schedule */ + if (dwc2_qh_is_non_per(qh)) { + /* Always start in inactive schedule */ + list_add_tail(&qh->qh_list_entry, + &hsotg->non_periodic_sched_inactive); + return 0; + } + + status = dwc2_schedule_periodic(hsotg, qh); + if (status) + return status; + if (!hsotg->periodic_qh_count) { + intr_mask = readl(hsotg->regs + GINTMSK); + intr_mask |= GINTSTS_SOF; + writel(intr_mask, hsotg->regs + GINTMSK); + } + hsotg->periodic_qh_count++; + + return 0; +} + +/** + * dwc2_hcd_qh_unlink() - Removes a QH from either the non-periodic or periodic + * schedule. Memory is not freed. + * + * @hsotg: The HCD state structure + * @qh: QH to remove from schedule + */ +void dwc2_hcd_qh_unlink(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh) +{ + u32 intr_mask; + + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + if (list_empty(&qh->qh_list_entry)) + /* QH is not in a schedule */ + return; + + if (dwc2_qh_is_non_per(qh)) { + if (hsotg->non_periodic_qh_ptr == &qh->qh_list_entry) + hsotg->non_periodic_qh_ptr = + hsotg->non_periodic_qh_ptr->next; + list_del_init(&qh->qh_list_entry); + return; + } + + dwc2_deschedule_periodic(hsotg, qh); + hsotg->periodic_qh_count--; + if (!hsotg->periodic_qh_count) { + intr_mask = readl(hsotg->regs + GINTMSK); + intr_mask &= ~GINTSTS_SOF; + writel(intr_mask, hsotg->regs + GINTMSK); + } +} + +/* + * Schedule the next continuing periodic split transfer + */ +static void dwc2_sched_periodic_split(struct dwc2_hsotg *hsotg, + struct dwc2_qh *qh, u16 frame_number, + int sched_next_periodic_split) +{ + u16 incr; + + if (sched_next_periodic_split) { + qh->sched_frame = frame_number; + incr = dwc2_frame_num_inc(qh->start_split_frame, 1); + if (dwc2_frame_num_le(frame_number, incr)) { + /* + * Allow one frame to elapse after start split + * microframe before scheduling complete split, but + * DON'T if we are doing the next start split in the + * same frame for an ISOC out + */ + if (qh->ep_type != USB_ENDPOINT_XFER_ISOC || + qh->ep_is_in != 0) { + qh->sched_frame = + dwc2_frame_num_inc(qh->sched_frame, 1); + } + } + } else { + qh->sched_frame = dwc2_frame_num_inc(qh->start_split_frame, + qh->interval); + if (dwc2_frame_num_le(qh->sched_frame, frame_number)) + qh->sched_frame = frame_number; + qh->sched_frame |= 0x7; + qh->start_split_frame = qh->sched_frame; + } +} + +/* + * Deactivates a QH. For non-periodic QHs, removes the QH from the active + * non-periodic schedule. The QH is added to the inactive non-periodic + * schedule if any QTDs are still attached to the QH. + * + * For periodic QHs, the QH is removed from the periodic queued schedule. If + * there are any QTDs still attached to the QH, the QH is added to either the + * periodic inactive schedule or the periodic ready schedule and its next + * scheduled frame is calculated. The QH is placed in the ready schedule if + * the scheduled frame has been reached already. Otherwise it's placed in the + * inactive schedule. If there are no QTDs attached to the QH, the QH is + * completely removed from the periodic schedule. + */ +void dwc2_hcd_qh_deactivate(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh, + int sched_next_periodic_split) +{ + u16 frame_number; + + if (dbg_qh(qh)) + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + if (dwc2_qh_is_non_per(qh)) { + dwc2_hcd_qh_unlink(hsotg, qh); + if (!list_empty(&qh->qtd_list)) + /* Add back to inactive non-periodic schedule */ + dwc2_hcd_qh_add(hsotg, qh); + return; + } + + frame_number = dwc2_hcd_get_frame_number(hsotg); + + if (qh->do_split) { + dwc2_sched_periodic_split(hsotg, qh, frame_number, + sched_next_periodic_split); + } else { + qh->sched_frame = dwc2_frame_num_inc(qh->sched_frame, + qh->interval); + if (dwc2_frame_num_le(qh->sched_frame, frame_number)) + qh->sched_frame = frame_number; + } + + if (list_empty(&qh->qtd_list)) { + dwc2_hcd_qh_unlink(hsotg, qh); + return; + } + /* + * Remove from periodic_sched_queued and move to + * appropriate queue + */ + if ((hsotg->core_params->uframe_sched > 0 && + dwc2_frame_num_le(qh->sched_frame, frame_number)) || + (hsotg->core_params->uframe_sched <= 0 && + qh->sched_frame == frame_number)) + list_move(&qh->qh_list_entry, &hsotg->periodic_sched_ready); + else + list_move(&qh->qh_list_entry, &hsotg->periodic_sched_inactive); +} + +/** + * dwc2_hcd_qtd_init() - Initializes a QTD structure + * + * @qtd: The QTD to initialize + * @urb: The associated URB + */ +void dwc2_hcd_qtd_init(struct dwc2_qtd *qtd, struct dwc2_hcd_urb *urb) +{ + qtd->urb = urb; + if (dwc2_hcd_get_pipe_type(&urb->pipe_info) == + USB_ENDPOINT_XFER_CONTROL) { + /* + * The only time the QTD data toggle is used is on the data + * phase of control transfers. This phase always starts with + * DATA1. + */ + qtd->data_toggle = DWC2_HC_PID_DATA1; + qtd->control_phase = DWC2_CONTROL_SETUP; + } + + /* Start split */ + qtd->complete_split = 0; + qtd->isoc_split_pos = DWC2_HCSPLT_XACTPOS_ALL; + qtd->isoc_split_offset = 0; + qtd->in_process = 0; + + /* Store the qtd ptr in the urb to reference the QTD */ + urb->qtd = qtd; +} + +/** + * dwc2_hcd_qtd_add() - Adds a QTD to the QTD-list of a QH + * + * @hsotg: The DWC HCD structure + * @qtd: The QTD to add + * @qh: Out parameter to return queue head + * @atomic_alloc: Flag to do atomic alloc if needed + * + * Return: 0 if successful, negative error code otherwise + * + * Finds the correct QH to place the QTD into. If it does not find a QH, it + * will create a new QH. If the QH to which the QTD is added is not currently + * scheduled, it is placed into the proper schedule based on its EP type. + */ +int dwc2_hcd_qtd_add(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd, + struct dwc2_qh **qh, gfp_t mem_flags) +{ + struct dwc2_hcd_urb *urb = qtd->urb; + unsigned long flags; + int allocated = 0; + int retval; + + /* + * Get the QH which holds the QTD-list to insert to. Create QH if it + * doesn't exist. + */ + if (*qh == NULL) { + *qh = dwc2_hcd_qh_create(hsotg, urb, mem_flags); + if (*qh == NULL) + return -ENOMEM; + allocated = 1; + } + + spin_lock_irqsave(&hsotg->lock, flags); + + retval = dwc2_hcd_qh_add(hsotg, *qh); + if (retval) + goto fail; + + qtd->qh = *qh; + list_add_tail(&qtd->qtd_list_entry, &(*qh)->qtd_list); + spin_unlock_irqrestore(&hsotg->lock, flags); + + return 0; + +fail: + if (allocated) { + struct dwc2_qtd *qtd2, *qtd2_tmp; + struct dwc2_qh *qh_tmp = *qh; + + *qh = NULL; + dwc2_hcd_qh_unlink(hsotg, qh_tmp); + + /* Free each QTD in the QH's QTD list */ + list_for_each_entry_safe(qtd2, qtd2_tmp, &qh_tmp->qtd_list, + qtd_list_entry) + dwc2_hcd_qtd_unlink_and_free(hsotg, qtd2, qh_tmp); + + spin_unlock_irqrestore(&hsotg->lock, flags); + dwc2_hcd_qh_free(hsotg, qh_tmp); + } else { + spin_unlock_irqrestore(&hsotg->lock, flags); + } + + return retval; +} diff --git a/kernel/drivers/usb/dwc2/hw.h b/kernel/drivers/usb/dwc2/hw.h new file mode 100644 index 000000000..d0a5ed8fa --- /dev/null +++ b/kernel/drivers/usb/dwc2/hw.h @@ -0,0 +1,813 @@ +/* + * hw.h - DesignWare HS OTG Controller hardware definitions + * + * Copyright 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __DWC2_HW_H__ +#define __DWC2_HW_H__ + +#define HSOTG_REG(x) (x) + +#define GOTGCTL HSOTG_REG(0x000) +#define GOTGCTL_CHIRPEN (1 << 27) +#define GOTGCTL_MULT_VALID_BC_MASK (0x1f << 22) +#define GOTGCTL_MULT_VALID_BC_SHIFT 22 +#define GOTGCTL_OTGVER (1 << 20) +#define GOTGCTL_BSESVLD (1 << 19) +#define GOTGCTL_ASESVLD (1 << 18) +#define GOTGCTL_DBNC_SHORT (1 << 17) +#define GOTGCTL_CONID_B (1 << 16) +#define GOTGCTL_DEVHNPEN (1 << 11) +#define GOTGCTL_HSTSETHNPEN (1 << 10) +#define GOTGCTL_HNPREQ (1 << 9) +#define GOTGCTL_HSTNEGSCS (1 << 8) +#define GOTGCTL_SESREQ (1 << 1) +#define GOTGCTL_SESREQSCS (1 << 0) + +#define GOTGINT HSOTG_REG(0x004) +#define GOTGINT_DBNCE_DONE (1 << 19) +#define GOTGINT_A_DEV_TOUT_CHG (1 << 18) +#define GOTGINT_HST_NEG_DET (1 << 17) +#define GOTGINT_HST_NEG_SUC_STS_CHNG (1 << 9) +#define GOTGINT_SES_REQ_SUC_STS_CHNG (1 << 8) +#define GOTGINT_SES_END_DET (1 << 2) + +#define GAHBCFG HSOTG_REG(0x008) +#define GAHBCFG_AHB_SINGLE (1 << 23) +#define GAHBCFG_NOTI_ALL_DMA_WRIT (1 << 22) +#define GAHBCFG_REM_MEM_SUPP (1 << 21) +#define GAHBCFG_P_TXF_EMP_LVL (1 << 8) +#define GAHBCFG_NP_TXF_EMP_LVL (1 << 7) +#define GAHBCFG_DMA_EN (1 << 5) +#define GAHBCFG_HBSTLEN_MASK (0xf << 1) +#define GAHBCFG_HBSTLEN_SHIFT 1 +#define GAHBCFG_HBSTLEN_SINGLE 0 +#define GAHBCFG_HBSTLEN_INCR 1 +#define GAHBCFG_HBSTLEN_INCR4 3 +#define GAHBCFG_HBSTLEN_INCR8 5 +#define GAHBCFG_HBSTLEN_INCR16 7 +#define GAHBCFG_GLBL_INTR_EN (1 << 0) +#define GAHBCFG_CTRL_MASK (GAHBCFG_P_TXF_EMP_LVL | \ + GAHBCFG_NP_TXF_EMP_LVL | \ + GAHBCFG_DMA_EN | \ + GAHBCFG_GLBL_INTR_EN) + +#define GUSBCFG HSOTG_REG(0x00C) +#define GUSBCFG_FORCEDEVMODE (1 << 30) +#define GUSBCFG_FORCEHOSTMODE (1 << 29) +#define GUSBCFG_TXENDDELAY (1 << 28) +#define GUSBCFG_ICTRAFFICPULLREMOVE (1 << 27) +#define GUSBCFG_ICUSBCAP (1 << 26) +#define GUSBCFG_ULPI_INT_PROT_DIS (1 << 25) +#define GUSBCFG_INDICATORPASSTHROUGH (1 << 24) +#define GUSBCFG_INDICATORCOMPLEMENT (1 << 23) +#define GUSBCFG_TERMSELDLPULSE (1 << 22) +#define GUSBCFG_ULPI_INT_VBUS_IND (1 << 21) +#define GUSBCFG_ULPI_EXT_VBUS_DRV (1 << 20) +#define GUSBCFG_ULPI_CLK_SUSP_M (1 << 19) +#define GUSBCFG_ULPI_AUTO_RES (1 << 18) +#define GUSBCFG_ULPI_FS_LS (1 << 17) +#define GUSBCFG_OTG_UTMI_FS_SEL (1 << 16) +#define GUSBCFG_PHY_LP_CLK_SEL (1 << 15) +#define GUSBCFG_USBTRDTIM_MASK (0xf << 10) +#define GUSBCFG_USBTRDTIM_SHIFT 10 +#define GUSBCFG_HNPCAP (1 << 9) +#define GUSBCFG_SRPCAP (1 << 8) +#define GUSBCFG_DDRSEL (1 << 7) +#define GUSBCFG_PHYSEL (1 << 6) +#define GUSBCFG_FSINTF (1 << 5) +#define GUSBCFG_ULPI_UTMI_SEL (1 << 4) +#define GUSBCFG_PHYIF16 (1 << 3) +#define GUSBCFG_PHYIF8 (0 << 3) +#define GUSBCFG_TOUTCAL_MASK (0x7 << 0) +#define GUSBCFG_TOUTCAL_SHIFT 0 +#define GUSBCFG_TOUTCAL_LIMIT 0x7 +#define GUSBCFG_TOUTCAL(_x) ((_x) << 0) + +#define GRSTCTL HSOTG_REG(0x010) +#define GRSTCTL_AHBIDLE (1 << 31) +#define GRSTCTL_DMAREQ (1 << 30) +#define GRSTCTL_TXFNUM_MASK (0x1f << 6) +#define GRSTCTL_TXFNUM_SHIFT 6 +#define GRSTCTL_TXFNUM_LIMIT 0x1f +#define GRSTCTL_TXFNUM(_x) ((_x) << 6) +#define GRSTCTL_TXFFLSH (1 << 5) +#define GRSTCTL_RXFFLSH (1 << 4) +#define GRSTCTL_IN_TKNQ_FLSH (1 << 3) +#define GRSTCTL_FRMCNTRRST (1 << 2) +#define GRSTCTL_HSFTRST (1 << 1) +#define GRSTCTL_CSFTRST (1 << 0) + +#define GINTSTS HSOTG_REG(0x014) +#define GINTMSK HSOTG_REG(0x018) +#define GINTSTS_WKUPINT (1 << 31) +#define GINTSTS_SESSREQINT (1 << 30) +#define GINTSTS_DISCONNINT (1 << 29) +#define GINTSTS_CONIDSTSCHNG (1 << 28) +#define GINTSTS_LPMTRANRCVD (1 << 27) +#define GINTSTS_PTXFEMP (1 << 26) +#define GINTSTS_HCHINT (1 << 25) +#define GINTSTS_PRTINT (1 << 24) +#define GINTSTS_RESETDET (1 << 23) +#define GINTSTS_FET_SUSP (1 << 22) +#define GINTSTS_INCOMPL_IP (1 << 21) +#define GINTSTS_INCOMPL_SOIN (1 << 20) +#define GINTSTS_OEPINT (1 << 19) +#define GINTSTS_IEPINT (1 << 18) +#define GINTSTS_EPMIS (1 << 17) +#define GINTSTS_RESTOREDONE (1 << 16) +#define GINTSTS_EOPF (1 << 15) +#define GINTSTS_ISOUTDROP (1 << 14) +#define GINTSTS_ENUMDONE (1 << 13) +#define GINTSTS_USBRST (1 << 12) +#define GINTSTS_USBSUSP (1 << 11) +#define GINTSTS_ERLYSUSP (1 << 10) +#define GINTSTS_I2CINT (1 << 9) +#define GINTSTS_ULPI_CK_INT (1 << 8) +#define GINTSTS_GOUTNAKEFF (1 << 7) +#define GINTSTS_GINNAKEFF (1 << 6) +#define GINTSTS_NPTXFEMP (1 << 5) +#define GINTSTS_RXFLVL (1 << 4) +#define GINTSTS_SOF (1 << 3) +#define GINTSTS_OTGINT (1 << 2) +#define GINTSTS_MODEMIS (1 << 1) +#define GINTSTS_CURMODE_HOST (1 << 0) + +#define GRXSTSR HSOTG_REG(0x01C) +#define GRXSTSP HSOTG_REG(0x020) +#define GRXSTS_FN_MASK (0x7f << 25) +#define GRXSTS_FN_SHIFT 25 +#define GRXSTS_PKTSTS_MASK (0xf << 17) +#define GRXSTS_PKTSTS_SHIFT 17 +#define GRXSTS_PKTSTS_GLOBALOUTNAK 1 +#define GRXSTS_PKTSTS_OUTRX 2 +#define GRXSTS_PKTSTS_HCHIN 2 +#define GRXSTS_PKTSTS_OUTDONE 3 +#define GRXSTS_PKTSTS_HCHIN_XFER_COMP 3 +#define GRXSTS_PKTSTS_SETUPDONE 4 +#define GRXSTS_PKTSTS_DATATOGGLEERR 5 +#define GRXSTS_PKTSTS_SETUPRX 6 +#define GRXSTS_PKTSTS_HCHHALTED 7 +#define GRXSTS_HCHNUM_MASK (0xf << 0) +#define GRXSTS_HCHNUM_SHIFT 0 +#define GRXSTS_DPID_MASK (0x3 << 15) +#define GRXSTS_DPID_SHIFT 15 +#define GRXSTS_BYTECNT_MASK (0x7ff << 4) +#define GRXSTS_BYTECNT_SHIFT 4 +#define GRXSTS_EPNUM_MASK (0xf << 0) +#define GRXSTS_EPNUM_SHIFT 0 + +#define GRXFSIZ HSOTG_REG(0x024) +#define GRXFSIZ_DEPTH_MASK (0xffff << 0) +#define GRXFSIZ_DEPTH_SHIFT 0 + +#define GNPTXFSIZ HSOTG_REG(0x028) +/* Use FIFOSIZE_* constants to access this register */ + +#define GNPTXSTS HSOTG_REG(0x02C) +#define GNPTXSTS_NP_TXQ_TOP_MASK (0x7f << 24) +#define GNPTXSTS_NP_TXQ_TOP_SHIFT 24 +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_MASK (0xff << 16) +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_SHIFT 16 +#define GNPTXSTS_NP_TXQ_SPC_AVAIL_GET(_v) (((_v) >> 16) & 0xff) +#define GNPTXSTS_NP_TXF_SPC_AVAIL_MASK (0xffff << 0) +#define GNPTXSTS_NP_TXF_SPC_AVAIL_SHIFT 0 +#define GNPTXSTS_NP_TXF_SPC_AVAIL_GET(_v) (((_v) >> 0) & 0xffff) + +#define GI2CCTL HSOTG_REG(0x0030) +#define GI2CCTL_BSYDNE (1 << 31) +#define GI2CCTL_RW (1 << 30) +#define GI2CCTL_I2CDATSE0 (1 << 28) +#define GI2CCTL_I2CDEVADDR_MASK (0x3 << 26) +#define GI2CCTL_I2CDEVADDR_SHIFT 26 +#define GI2CCTL_I2CSUSPCTL (1 << 25) +#define GI2CCTL_ACK (1 << 24) +#define GI2CCTL_I2CEN (1 << 23) +#define GI2CCTL_ADDR_MASK (0x7f << 16) +#define GI2CCTL_ADDR_SHIFT 16 +#define GI2CCTL_REGADDR_MASK (0xff << 8) +#define GI2CCTL_REGADDR_SHIFT 8 +#define GI2CCTL_RWDATA_MASK (0xff << 0) +#define GI2CCTL_RWDATA_SHIFT 0 + +#define GPVNDCTL HSOTG_REG(0x0034) +#define GGPIO HSOTG_REG(0x0038) +#define GUID HSOTG_REG(0x003c) +#define GSNPSID HSOTG_REG(0x0040) +#define GHWCFG1 HSOTG_REG(0x0044) + +#define GHWCFG2 HSOTG_REG(0x0048) +#define GHWCFG2_OTG_ENABLE_IC_USB (1 << 31) +#define GHWCFG2_DEV_TOKEN_Q_DEPTH_MASK (0x1f << 26) +#define GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT 26 +#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK (0x3 << 24) +#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT 24 +#define GHWCFG2_NONPERIO_TX_Q_DEPTH_MASK (0x3 << 22) +#define GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT 22 +#define GHWCFG2_MULTI_PROC_INT (1 << 20) +#define GHWCFG2_DYNAMIC_FIFO (1 << 19) +#define GHWCFG2_PERIO_EP_SUPPORTED (1 << 18) +#define GHWCFG2_NUM_HOST_CHAN_MASK (0xf << 14) +#define GHWCFG2_NUM_HOST_CHAN_SHIFT 14 +#define GHWCFG2_NUM_DEV_EP_MASK (0xf << 10) +#define GHWCFG2_NUM_DEV_EP_SHIFT 10 +#define GHWCFG2_FS_PHY_TYPE_MASK (0x3 << 8) +#define GHWCFG2_FS_PHY_TYPE_SHIFT 8 +#define GHWCFG2_FS_PHY_TYPE_NOT_SUPPORTED 0 +#define GHWCFG2_FS_PHY_TYPE_DEDICATED 1 +#define GHWCFG2_FS_PHY_TYPE_SHARED_UTMI 2 +#define GHWCFG2_FS_PHY_TYPE_SHARED_ULPI 3 +#define GHWCFG2_HS_PHY_TYPE_MASK (0x3 << 6) +#define GHWCFG2_HS_PHY_TYPE_SHIFT 6 +#define GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0 +#define GHWCFG2_HS_PHY_TYPE_UTMI 1 +#define GHWCFG2_HS_PHY_TYPE_ULPI 2 +#define GHWCFG2_HS_PHY_TYPE_UTMI_ULPI 3 +#define GHWCFG2_POINT2POINT (1 << 5) +#define GHWCFG2_ARCHITECTURE_MASK (0x3 << 3) +#define GHWCFG2_ARCHITECTURE_SHIFT 3 +#define GHWCFG2_SLAVE_ONLY_ARCH 0 +#define GHWCFG2_EXT_DMA_ARCH 1 +#define GHWCFG2_INT_DMA_ARCH 2 +#define GHWCFG2_OP_MODE_MASK (0x7 << 0) +#define GHWCFG2_OP_MODE_SHIFT 0 +#define GHWCFG2_OP_MODE_HNP_SRP_CAPABLE 0 +#define GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE 1 +#define GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE 2 +#define GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3 +#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4 +#define GHWCFG2_OP_MODE_SRP_CAPABLE_HOST 5 +#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6 +#define GHWCFG2_OP_MODE_UNDEFINED 7 + +#define GHWCFG3 HSOTG_REG(0x004c) +#define GHWCFG3_DFIFO_DEPTH_MASK (0xffff << 16) +#define GHWCFG3_DFIFO_DEPTH_SHIFT 16 +#define GHWCFG3_OTG_LPM_EN (1 << 15) +#define GHWCFG3_BC_SUPPORT (1 << 14) +#define GHWCFG3_OTG_ENABLE_HSIC (1 << 13) +#define GHWCFG3_ADP_SUPP (1 << 12) +#define GHWCFG3_SYNCH_RESET_TYPE (1 << 11) +#define GHWCFG3_OPTIONAL_FEATURES (1 << 10) +#define GHWCFG3_VENDOR_CTRL_IF (1 << 9) +#define GHWCFG3_I2C (1 << 8) +#define GHWCFG3_OTG_FUNC (1 << 7) +#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK (0x7 << 4) +#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT 4 +#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK (0xf << 0) +#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT 0 + +#define GHWCFG4 HSOTG_REG(0x0050) +#define GHWCFG4_DESC_DMA_DYN (1 << 31) +#define GHWCFG4_DESC_DMA (1 << 30) +#define GHWCFG4_NUM_IN_EPS_MASK (0xf << 26) +#define GHWCFG4_NUM_IN_EPS_SHIFT 26 +#define GHWCFG4_DED_FIFO_EN (1 << 25) +#define GHWCFG4_DED_FIFO_SHIFT 25 +#define GHWCFG4_SESSION_END_FILT_EN (1 << 24) +#define GHWCFG4_B_VALID_FILT_EN (1 << 23) +#define GHWCFG4_A_VALID_FILT_EN (1 << 22) +#define GHWCFG4_VBUS_VALID_FILT_EN (1 << 21) +#define GHWCFG4_IDDIG_FILT_EN (1 << 20) +#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_MASK (0xf << 16) +#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_SHIFT 16 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK (0x3 << 14) +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT 14 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8 0 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_16 1 +#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8_OR_16 2 +#define GHWCFG4_XHIBER (1 << 7) +#define GHWCFG4_HIBER (1 << 6) +#define GHWCFG4_MIN_AHB_FREQ (1 << 5) +#define GHWCFG4_POWER_OPTIMIZ (1 << 4) +#define GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK (0xf << 0) +#define GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT 0 + +#define GLPMCFG HSOTG_REG(0x0054) +#define GLPMCFG_INV_SEL_HSIC (1 << 31) +#define GLPMCFG_HSIC_CONNECT (1 << 30) +#define GLPMCFG_RETRY_COUNT_STS_MASK (0x7 << 25) +#define GLPMCFG_RETRY_COUNT_STS_SHIFT 25 +#define GLPMCFG_SEND_LPM (1 << 24) +#define GLPMCFG_RETRY_COUNT_MASK (0x7 << 21) +#define GLPMCFG_RETRY_COUNT_SHIFT 21 +#define GLPMCFG_LPM_CHAN_INDEX_MASK (0xf << 17) +#define GLPMCFG_LPM_CHAN_INDEX_SHIFT 17 +#define GLPMCFG_SLEEP_STATE_RESUMEOK (1 << 16) +#define GLPMCFG_PRT_SLEEP_STS (1 << 15) +#define GLPMCFG_LPM_RESP_MASK (0x3 << 13) +#define GLPMCFG_LPM_RESP_SHIFT 13 +#define GLPMCFG_HIRD_THRES_MASK (0x1f << 8) +#define GLPMCFG_HIRD_THRES_SHIFT 8 +#define GLPMCFG_HIRD_THRES_EN (0x10 << 8) +#define GLPMCFG_EN_UTMI_SLEEP (1 << 7) +#define GLPMCFG_REM_WKUP_EN (1 << 6) +#define GLPMCFG_HIRD_MASK (0xf << 2) +#define GLPMCFG_HIRD_SHIFT 2 +#define GLPMCFG_APPL_RESP (1 << 1) +#define GLPMCFG_LPM_CAP_EN (1 << 0) + +#define GPWRDN HSOTG_REG(0x0058) +#define GPWRDN_MULT_VAL_ID_BC_MASK (0x1f << 24) +#define GPWRDN_MULT_VAL_ID_BC_SHIFT 24 +#define GPWRDN_ADP_INT (1 << 23) +#define GPWRDN_BSESSVLD (1 << 22) +#define GPWRDN_IDSTS (1 << 21) +#define GPWRDN_LINESTATE_MASK (0x3 << 19) +#define GPWRDN_LINESTATE_SHIFT 19 +#define GPWRDN_STS_CHGINT_MSK (1 << 18) +#define GPWRDN_STS_CHGINT (1 << 17) +#define GPWRDN_SRP_DET_MSK (1 << 16) +#define GPWRDN_SRP_DET (1 << 15) +#define GPWRDN_CONNECT_DET_MSK (1 << 14) +#define GPWRDN_CONNECT_DET (1 << 13) +#define GPWRDN_DISCONN_DET_MSK (1 << 12) +#define GPWRDN_DISCONN_DET (1 << 11) +#define GPWRDN_RST_DET_MSK (1 << 10) +#define GPWRDN_RST_DET (1 << 9) +#define GPWRDN_LNSTSCHG_MSK (1 << 8) +#define GPWRDN_LNSTSCHG (1 << 7) +#define GPWRDN_DIS_VBUS (1 << 6) +#define GPWRDN_PWRDNSWTCH (1 << 5) +#define GPWRDN_PWRDNRSTN (1 << 4) +#define GPWRDN_PWRDNCLMP (1 << 3) +#define GPWRDN_RESTORE (1 << 2) +#define GPWRDN_PMUACTV (1 << 1) +#define GPWRDN_PMUINTSEL (1 << 0) + +#define GDFIFOCFG HSOTG_REG(0x005c) +#define GDFIFOCFG_EPINFOBASE_MASK (0xffff << 16) +#define GDFIFOCFG_EPINFOBASE_SHIFT 16 +#define GDFIFOCFG_GDFIFOCFG_MASK (0xffff << 0) +#define GDFIFOCFG_GDFIFOCFG_SHIFT 0 + +#define ADPCTL HSOTG_REG(0x0060) +#define ADPCTL_AR_MASK (0x3 << 27) +#define ADPCTL_AR_SHIFT 27 +#define ADPCTL_ADP_TMOUT_INT_MSK (1 << 26) +#define ADPCTL_ADP_SNS_INT_MSK (1 << 25) +#define ADPCTL_ADP_PRB_INT_MSK (1 << 24) +#define ADPCTL_ADP_TMOUT_INT (1 << 23) +#define ADPCTL_ADP_SNS_INT (1 << 22) +#define ADPCTL_ADP_PRB_INT (1 << 21) +#define ADPCTL_ADPENA (1 << 20) +#define ADPCTL_ADPRES (1 << 19) +#define ADPCTL_ENASNS (1 << 18) +#define ADPCTL_ENAPRB (1 << 17) +#define ADPCTL_RTIM_MASK (0x7ff << 6) +#define ADPCTL_RTIM_SHIFT 6 +#define ADPCTL_PRB_PER_MASK (0x3 << 4) +#define ADPCTL_PRB_PER_SHIFT 4 +#define ADPCTL_PRB_DELTA_MASK (0x3 << 2) +#define ADPCTL_PRB_DELTA_SHIFT 2 +#define ADPCTL_PRB_DSCHRG_MASK (0x3 << 0) +#define ADPCTL_PRB_DSCHRG_SHIFT 0 + +#define HPTXFSIZ HSOTG_REG(0x100) +/* Use FIFOSIZE_* constants to access this register */ + +#define DPTXFSIZN(_a) HSOTG_REG(0x104 + (((_a) - 1) * 4)) +/* Use FIFOSIZE_* constants to access this register */ + +/* These apply to the GNPTXFSIZ, HPTXFSIZ and DPTXFSIZN registers */ +#define FIFOSIZE_DEPTH_MASK (0xffff << 16) +#define FIFOSIZE_DEPTH_SHIFT 16 +#define FIFOSIZE_STARTADDR_MASK (0xffff << 0) +#define FIFOSIZE_STARTADDR_SHIFT 0 +#define FIFOSIZE_DEPTH_GET(_x) (((_x) >> 16) & 0xffff) + +/* Device mode registers */ + +#define DCFG HSOTG_REG(0x800) +#define DCFG_EPMISCNT_MASK (0x1f << 18) +#define DCFG_EPMISCNT_SHIFT 18 +#define DCFG_EPMISCNT_LIMIT 0x1f +#define DCFG_EPMISCNT(_x) ((_x) << 18) +#define DCFG_PERFRINT_MASK (0x3 << 11) +#define DCFG_PERFRINT_SHIFT 11 +#define DCFG_PERFRINT_LIMIT 0x3 +#define DCFG_PERFRINT(_x) ((_x) << 11) +#define DCFG_DEVADDR_MASK (0x7f << 4) +#define DCFG_DEVADDR_SHIFT 4 +#define DCFG_DEVADDR_LIMIT 0x7f +#define DCFG_DEVADDR(_x) ((_x) << 4) +#define DCFG_NZ_STS_OUT_HSHK (1 << 2) +#define DCFG_DEVSPD_MASK (0x3 << 0) +#define DCFG_DEVSPD_SHIFT 0 +#define DCFG_DEVSPD_HS 0 +#define DCFG_DEVSPD_FS 1 +#define DCFG_DEVSPD_LS 2 +#define DCFG_DEVSPD_FS48 3 + +#define DCTL HSOTG_REG(0x804) +#define DCTL_PWRONPRGDONE (1 << 11) +#define DCTL_CGOUTNAK (1 << 10) +#define DCTL_SGOUTNAK (1 << 9) +#define DCTL_CGNPINNAK (1 << 8) +#define DCTL_SGNPINNAK (1 << 7) +#define DCTL_TSTCTL_MASK (0x7 << 4) +#define DCTL_TSTCTL_SHIFT 4 +#define DCTL_GOUTNAKSTS (1 << 3) +#define DCTL_GNPINNAKSTS (1 << 2) +#define DCTL_SFTDISCON (1 << 1) +#define DCTL_RMTWKUPSIG (1 << 0) + +#define DSTS HSOTG_REG(0x808) +#define DSTS_SOFFN_MASK (0x3fff << 8) +#define DSTS_SOFFN_SHIFT 8 +#define DSTS_SOFFN_LIMIT 0x3fff +#define DSTS_SOFFN(_x) ((_x) << 8) +#define DSTS_ERRATICERR (1 << 3) +#define DSTS_ENUMSPD_MASK (0x3 << 1) +#define DSTS_ENUMSPD_SHIFT 1 +#define DSTS_ENUMSPD_HS 0 +#define DSTS_ENUMSPD_FS 1 +#define DSTS_ENUMSPD_LS 2 +#define DSTS_ENUMSPD_FS48 3 +#define DSTS_SUSPSTS (1 << 0) + +#define DIEPMSK HSOTG_REG(0x810) +#define DIEPMSK_TXFIFOEMPTY (1 << 7) +#define DIEPMSK_INEPNAKEFFMSK (1 << 6) +#define DIEPMSK_INTKNEPMISMSK (1 << 5) +#define DIEPMSK_INTKNTXFEMPMSK (1 << 4) +#define DIEPMSK_TIMEOUTMSK (1 << 3) +#define DIEPMSK_AHBERRMSK (1 << 2) +#define DIEPMSK_EPDISBLDMSK (1 << 1) +#define DIEPMSK_XFERCOMPLMSK (1 << 0) + +#define DOEPMSK HSOTG_REG(0x814) +#define DOEPMSK_BACK2BACKSETUP (1 << 6) +#define DOEPMSK_OUTTKNEPDISMSK (1 << 4) +#define DOEPMSK_SETUPMSK (1 << 3) +#define DOEPMSK_AHBERRMSK (1 << 2) +#define DOEPMSK_EPDISBLDMSK (1 << 1) +#define DOEPMSK_XFERCOMPLMSK (1 << 0) + +#define DAINT HSOTG_REG(0x818) +#define DAINTMSK HSOTG_REG(0x81C) +#define DAINT_OUTEP_SHIFT 16 +#define DAINT_OUTEP(_x) (1 << ((_x) + 16)) +#define DAINT_INEP(_x) (1 << (_x)) + +#define DTKNQR1 HSOTG_REG(0x820) +#define DTKNQR2 HSOTG_REG(0x824) +#define DTKNQR3 HSOTG_REG(0x830) +#define DTKNQR4 HSOTG_REG(0x834) + +#define DVBUSDIS HSOTG_REG(0x828) +#define DVBUSPULSE HSOTG_REG(0x82C) + +#define DIEPCTL0 HSOTG_REG(0x900) +#define DIEPCTL(_a) HSOTG_REG(0x900 + ((_a) * 0x20)) + +#define DOEPCTL0 HSOTG_REG(0xB00) +#define DOEPCTL(_a) HSOTG_REG(0xB00 + ((_a) * 0x20)) + +/* EP0 specialness: + * bits[29..28] - reserved (no SetD0PID, SetD1PID) + * bits[25..22] - should always be zero, this isn't a periodic endpoint + * bits[10..0] - MPS setting different for EP0 + */ +#define D0EPCTL_MPS_MASK (0x3 << 0) +#define D0EPCTL_MPS_SHIFT 0 +#define D0EPCTL_MPS_64 0 +#define D0EPCTL_MPS_32 1 +#define D0EPCTL_MPS_16 2 +#define D0EPCTL_MPS_8 3 + +#define DXEPCTL_EPENA (1 << 31) +#define DXEPCTL_EPDIS (1 << 30) +#define DXEPCTL_SETD1PID (1 << 29) +#define DXEPCTL_SETODDFR (1 << 29) +#define DXEPCTL_SETD0PID (1 << 28) +#define DXEPCTL_SETEVENFR (1 << 28) +#define DXEPCTL_SNAK (1 << 27) +#define DXEPCTL_CNAK (1 << 26) +#define DXEPCTL_TXFNUM_MASK (0xf << 22) +#define DXEPCTL_TXFNUM_SHIFT 22 +#define DXEPCTL_TXFNUM_LIMIT 0xf +#define DXEPCTL_TXFNUM(_x) ((_x) << 22) +#define DXEPCTL_STALL (1 << 21) +#define DXEPCTL_SNP (1 << 20) +#define DXEPCTL_EPTYPE_MASK (0x3 << 18) +#define DXEPCTL_EPTYPE_CONTROL (0x0 << 18) +#define DXEPCTL_EPTYPE_ISO (0x1 << 18) +#define DXEPCTL_EPTYPE_BULK (0x2 << 18) +#define DXEPCTL_EPTYPE_INTERRUPT (0x3 << 18) + +#define DXEPCTL_NAKSTS (1 << 17) +#define DXEPCTL_DPID (1 << 16) +#define DXEPCTL_EOFRNUM (1 << 16) +#define DXEPCTL_USBACTEP (1 << 15) +#define DXEPCTL_NEXTEP_MASK (0xf << 11) +#define DXEPCTL_NEXTEP_SHIFT 11 +#define DXEPCTL_NEXTEP_LIMIT 0xf +#define DXEPCTL_NEXTEP(_x) ((_x) << 11) +#define DXEPCTL_MPS_MASK (0x7ff << 0) +#define DXEPCTL_MPS_SHIFT 0 +#define DXEPCTL_MPS_LIMIT 0x7ff +#define DXEPCTL_MPS(_x) ((_x) << 0) + +#define DIEPINT(_a) HSOTG_REG(0x908 + ((_a) * 0x20)) +#define DOEPINT(_a) HSOTG_REG(0xB08 + ((_a) * 0x20)) +#define DXEPINT_SETUP_RCVD (1 << 15) +#define DXEPINT_INEPNAKEFF (1 << 6) +#define DXEPINT_BACK2BACKSETUP (1 << 6) +#define DXEPINT_INTKNEPMIS (1 << 5) +#define DXEPINT_INTKNTXFEMP (1 << 4) +#define DXEPINT_OUTTKNEPDIS (1 << 4) +#define DXEPINT_TIMEOUT (1 << 3) +#define DXEPINT_SETUP (1 << 3) +#define DXEPINT_AHBERR (1 << 2) +#define DXEPINT_EPDISBLD (1 << 1) +#define DXEPINT_XFERCOMPL (1 << 0) + +#define DIEPTSIZ0 HSOTG_REG(0x910) +#define DIEPTSIZ0_PKTCNT_MASK (0x3 << 19) +#define DIEPTSIZ0_PKTCNT_SHIFT 19 +#define DIEPTSIZ0_PKTCNT_LIMIT 0x3 +#define DIEPTSIZ0_PKTCNT(_x) ((_x) << 19) +#define DIEPTSIZ0_XFERSIZE_MASK (0x7f << 0) +#define DIEPTSIZ0_XFERSIZE_SHIFT 0 +#define DIEPTSIZ0_XFERSIZE_LIMIT 0x7f +#define DIEPTSIZ0_XFERSIZE(_x) ((_x) << 0) + +#define DOEPTSIZ0 HSOTG_REG(0xB10) +#define DOEPTSIZ0_SUPCNT_MASK (0x3 << 29) +#define DOEPTSIZ0_SUPCNT_SHIFT 29 +#define DOEPTSIZ0_SUPCNT_LIMIT 0x3 +#define DOEPTSIZ0_SUPCNT(_x) ((_x) << 29) +#define DOEPTSIZ0_PKTCNT (1 << 19) +#define DOEPTSIZ0_XFERSIZE_MASK (0x7f << 0) +#define DOEPTSIZ0_XFERSIZE_SHIFT 0 + +#define DIEPTSIZ(_a) HSOTG_REG(0x910 + ((_a) * 0x20)) +#define DOEPTSIZ(_a) HSOTG_REG(0xB10 + ((_a) * 0x20)) +#define DXEPTSIZ_MC_MASK (0x3 << 29) +#define DXEPTSIZ_MC_SHIFT 29 +#define DXEPTSIZ_MC_LIMIT 0x3 +#define DXEPTSIZ_MC(_x) ((_x) << 29) +#define DXEPTSIZ_PKTCNT_MASK (0x3ff << 19) +#define DXEPTSIZ_PKTCNT_SHIFT 19 +#define DXEPTSIZ_PKTCNT_LIMIT 0x3ff +#define DXEPTSIZ_PKTCNT_GET(_v) (((_v) >> 19) & 0x3ff) +#define DXEPTSIZ_PKTCNT(_x) ((_x) << 19) +#define DXEPTSIZ_XFERSIZE_MASK (0x7ffff << 0) +#define DXEPTSIZ_XFERSIZE_SHIFT 0 +#define DXEPTSIZ_XFERSIZE_LIMIT 0x7ffff +#define DXEPTSIZ_XFERSIZE_GET(_v) (((_v) >> 0) & 0x7ffff) +#define DXEPTSIZ_XFERSIZE(_x) ((_x) << 0) + +#define DIEPDMA(_a) HSOTG_REG(0x914 + ((_a) * 0x20)) +#define DOEPDMA(_a) HSOTG_REG(0xB14 + ((_a) * 0x20)) + +#define DTXFSTS(_a) HSOTG_REG(0x918 + ((_a) * 0x20)) + +#define PCGCTL HSOTG_REG(0x0e00) +#define PCGCTL_IF_DEV_MODE (1 << 31) +#define PCGCTL_P2HD_PRT_SPD_MASK (0x3 << 29) +#define PCGCTL_P2HD_PRT_SPD_SHIFT 29 +#define PCGCTL_P2HD_DEV_ENUM_SPD_MASK (0x3 << 27) +#define PCGCTL_P2HD_DEV_ENUM_SPD_SHIFT 27 +#define PCGCTL_MAC_DEV_ADDR_MASK (0x7f << 20) +#define PCGCTL_MAC_DEV_ADDR_SHIFT 20 +#define PCGCTL_MAX_TERMSEL (1 << 19) +#define PCGCTL_MAX_XCVRSELECT_MASK (0x3 << 17) +#define PCGCTL_MAX_XCVRSELECT_SHIFT 17 +#define PCGCTL_PORT_POWER (1 << 16) +#define PCGCTL_PRT_CLK_SEL_MASK (0x3 << 14) +#define PCGCTL_PRT_CLK_SEL_SHIFT 14 +#define PCGCTL_ESS_REG_RESTORED (1 << 13) +#define PCGCTL_EXTND_HIBER_SWITCH (1 << 12) +#define PCGCTL_EXTND_HIBER_PWRCLMP (1 << 11) +#define PCGCTL_ENBL_EXTND_HIBER (1 << 10) +#define PCGCTL_RESTOREMODE (1 << 9) +#define PCGCTL_RESETAFTSUSP (1 << 8) +#define PCGCTL_DEEP_SLEEP (1 << 7) +#define PCGCTL_PHY_IN_SLEEP (1 << 6) +#define PCGCTL_ENBL_SLEEP_GATING (1 << 5) +#define PCGCTL_RSTPDWNMODULE (1 << 3) +#define PCGCTL_PWRCLMP (1 << 2) +#define PCGCTL_GATEHCLK (1 << 1) +#define PCGCTL_STOPPCLK (1 << 0) + +#define EPFIFO(_a) HSOTG_REG(0x1000 + ((_a) * 0x1000)) + +/* Host Mode Registers */ + +#define HCFG HSOTG_REG(0x0400) +#define HCFG_MODECHTIMEN (1 << 31) +#define HCFG_PERSCHEDENA (1 << 26) +#define HCFG_FRLISTEN_MASK (0x3 << 24) +#define HCFG_FRLISTEN_SHIFT 24 +#define HCFG_FRLISTEN_8 (0 << 24) +#define FRLISTEN_8_SIZE 8 +#define HCFG_FRLISTEN_16 (1 << 24) +#define FRLISTEN_16_SIZE 16 +#define HCFG_FRLISTEN_32 (2 << 24) +#define FRLISTEN_32_SIZE 32 +#define HCFG_FRLISTEN_64 (3 << 24) +#define FRLISTEN_64_SIZE 64 +#define HCFG_DESCDMA (1 << 23) +#define HCFG_RESVALID_MASK (0xff << 8) +#define HCFG_RESVALID_SHIFT 8 +#define HCFG_ENA32KHZ (1 << 7) +#define HCFG_FSLSSUPP (1 << 2) +#define HCFG_FSLSPCLKSEL_MASK (0x3 << 0) +#define HCFG_FSLSPCLKSEL_SHIFT 0 +#define HCFG_FSLSPCLKSEL_30_60_MHZ 0 +#define HCFG_FSLSPCLKSEL_48_MHZ 1 +#define HCFG_FSLSPCLKSEL_6_MHZ 2 + +#define HFIR HSOTG_REG(0x0404) +#define HFIR_FRINT_MASK (0xffff << 0) +#define HFIR_FRINT_SHIFT 0 +#define HFIR_RLDCTRL (1 << 16) + +#define HFNUM HSOTG_REG(0x0408) +#define HFNUM_FRREM_MASK (0xffff << 16) +#define HFNUM_FRREM_SHIFT 16 +#define HFNUM_FRNUM_MASK (0xffff << 0) +#define HFNUM_FRNUM_SHIFT 0 +#define HFNUM_MAX_FRNUM 0x3fff + +#define HPTXSTS HSOTG_REG(0x0410) +#define TXSTS_QTOP_ODD (1 << 31) +#define TXSTS_QTOP_CHNEP_MASK (0xf << 27) +#define TXSTS_QTOP_CHNEP_SHIFT 27 +#define TXSTS_QTOP_TOKEN_MASK (0x3 << 25) +#define TXSTS_QTOP_TOKEN_SHIFT 25 +#define TXSTS_QTOP_TERMINATE (1 << 24) +#define TXSTS_QSPCAVAIL_MASK (0xff << 16) +#define TXSTS_QSPCAVAIL_SHIFT 16 +#define TXSTS_FSPCAVAIL_MASK (0xffff << 0) +#define TXSTS_FSPCAVAIL_SHIFT 0 + +#define HAINT HSOTG_REG(0x0414) +#define HAINTMSK HSOTG_REG(0x0418) +#define HFLBADDR HSOTG_REG(0x041c) + +#define HPRT0 HSOTG_REG(0x0440) +#define HPRT0_SPD_MASK (0x3 << 17) +#define HPRT0_SPD_SHIFT 17 +#define HPRT0_SPD_HIGH_SPEED 0 +#define HPRT0_SPD_FULL_SPEED 1 +#define HPRT0_SPD_LOW_SPEED 2 +#define HPRT0_TSTCTL_MASK (0xf << 13) +#define HPRT0_TSTCTL_SHIFT 13 +#define HPRT0_PWR (1 << 12) +#define HPRT0_LNSTS_MASK (0x3 << 10) +#define HPRT0_LNSTS_SHIFT 10 +#define HPRT0_RST (1 << 8) +#define HPRT0_SUSP (1 << 7) +#define HPRT0_RES (1 << 6) +#define HPRT0_OVRCURRCHG (1 << 5) +#define HPRT0_OVRCURRACT (1 << 4) +#define HPRT0_ENACHG (1 << 3) +#define HPRT0_ENA (1 << 2) +#define HPRT0_CONNDET (1 << 1) +#define HPRT0_CONNSTS (1 << 0) + +#define HCCHAR(_ch) HSOTG_REG(0x0500 + 0x20 * (_ch)) +#define HCCHAR_CHENA (1 << 31) +#define HCCHAR_CHDIS (1 << 30) +#define HCCHAR_ODDFRM (1 << 29) +#define HCCHAR_DEVADDR_MASK (0x7f << 22) +#define HCCHAR_DEVADDR_SHIFT 22 +#define HCCHAR_MULTICNT_MASK (0x3 << 20) +#define HCCHAR_MULTICNT_SHIFT 20 +#define HCCHAR_EPTYPE_MASK (0x3 << 18) +#define HCCHAR_EPTYPE_SHIFT 18 +#define HCCHAR_LSPDDEV (1 << 17) +#define HCCHAR_EPDIR (1 << 15) +#define HCCHAR_EPNUM_MASK (0xf << 11) +#define HCCHAR_EPNUM_SHIFT 11 +#define HCCHAR_MPS_MASK (0x7ff << 0) +#define HCCHAR_MPS_SHIFT 0 + +#define HCSPLT(_ch) HSOTG_REG(0x0504 + 0x20 * (_ch)) +#define HCSPLT_SPLTENA (1 << 31) +#define HCSPLT_COMPSPLT (1 << 16) +#define HCSPLT_XACTPOS_MASK (0x3 << 14) +#define HCSPLT_XACTPOS_SHIFT 14 +#define HCSPLT_XACTPOS_MID 0 +#define HCSPLT_XACTPOS_END 1 +#define HCSPLT_XACTPOS_BEGIN 2 +#define HCSPLT_XACTPOS_ALL 3 +#define HCSPLT_HUBADDR_MASK (0x7f << 7) +#define HCSPLT_HUBADDR_SHIFT 7 +#define HCSPLT_PRTADDR_MASK (0x7f << 0) +#define HCSPLT_PRTADDR_SHIFT 0 + +#define HCINT(_ch) HSOTG_REG(0x0508 + 0x20 * (_ch)) +#define HCINTMSK(_ch) HSOTG_REG(0x050c + 0x20 * (_ch)) +#define HCINTMSK_RESERVED14_31 (0x3ffff << 14) +#define HCINTMSK_FRM_LIST_ROLL (1 << 13) +#define HCINTMSK_XCS_XACT (1 << 12) +#define HCINTMSK_BNA (1 << 11) +#define HCINTMSK_DATATGLERR (1 << 10) +#define HCINTMSK_FRMOVRUN (1 << 9) +#define HCINTMSK_BBLERR (1 << 8) +#define HCINTMSK_XACTERR (1 << 7) +#define HCINTMSK_NYET (1 << 6) +#define HCINTMSK_ACK (1 << 5) +#define HCINTMSK_NAK (1 << 4) +#define HCINTMSK_STALL (1 << 3) +#define HCINTMSK_AHBERR (1 << 2) +#define HCINTMSK_CHHLTD (1 << 1) +#define HCINTMSK_XFERCOMPL (1 << 0) + +#define HCTSIZ(_ch) HSOTG_REG(0x0510 + 0x20 * (_ch)) +#define TSIZ_DOPNG (1 << 31) +#define TSIZ_SC_MC_PID_MASK (0x3 << 29) +#define TSIZ_SC_MC_PID_SHIFT 29 +#define TSIZ_SC_MC_PID_DATA0 0 +#define TSIZ_SC_MC_PID_DATA2 1 +#define TSIZ_SC_MC_PID_DATA1 2 +#define TSIZ_SC_MC_PID_MDATA 3 +#define TSIZ_SC_MC_PID_SETUP 3 +#define TSIZ_PKTCNT_MASK (0x3ff << 19) +#define TSIZ_PKTCNT_SHIFT 19 +#define TSIZ_NTD_MASK (0xff << 8) +#define TSIZ_NTD_SHIFT 8 +#define TSIZ_SCHINFO_MASK (0xff << 0) +#define TSIZ_SCHINFO_SHIFT 0 +#define TSIZ_XFERSIZE_MASK (0x7ffff << 0) +#define TSIZ_XFERSIZE_SHIFT 0 + +#define HCDMA(_ch) HSOTG_REG(0x0514 + 0x20 * (_ch)) +#define HCDMA_DMA_ADDR_MASK (0x1fffff << 11) +#define HCDMA_DMA_ADDR_SHIFT 11 +#define HCDMA_CTD_MASK (0xff << 3) +#define HCDMA_CTD_SHIFT 3 + +#define HCDMAB(_ch) HSOTG_REG(0x051c + 0x20 * (_ch)) + +#define HCFIFO(_ch) HSOTG_REG(0x1000 + 0x1000 * (_ch)) + +/** + * struct dwc2_hcd_dma_desc - Host-mode DMA descriptor structure + * + * @status: DMA descriptor status quadlet + * @buf: DMA descriptor data buffer pointer + * + * DMA Descriptor structure contains two quadlets: + * Status quadlet and Data buffer pointer. + */ +struct dwc2_hcd_dma_desc { + u32 status; + u32 buf; +}; + +#define HOST_DMA_A (1 << 31) +#define HOST_DMA_STS_MASK (0x3 << 28) +#define HOST_DMA_STS_SHIFT 28 +#define HOST_DMA_STS_PKTERR (1 << 28) +#define HOST_DMA_EOL (1 << 26) +#define HOST_DMA_IOC (1 << 25) +#define HOST_DMA_SUP (1 << 24) +#define HOST_DMA_ALT_QTD (1 << 23) +#define HOST_DMA_QTD_OFFSET_MASK (0x3f << 17) +#define HOST_DMA_QTD_OFFSET_SHIFT 17 +#define HOST_DMA_ISOC_NBYTES_MASK (0xfff << 0) +#define HOST_DMA_ISOC_NBYTES_SHIFT 0 +#define HOST_DMA_NBYTES_MASK (0x1ffff << 0) +#define HOST_DMA_NBYTES_SHIFT 0 + +#define MAX_DMA_DESC_SIZE 131071 +#define MAX_DMA_DESC_NUM_GENERIC 64 +#define MAX_DMA_DESC_NUM_HS_ISOC 256 + +#endif /* __DWC2_HW_H__ */ diff --git a/kernel/drivers/usb/dwc2/pci.c b/kernel/drivers/usb/dwc2/pci.c new file mode 100644 index 000000000..ae419615a --- /dev/null +++ b/kernel/drivers/usb/dwc2/pci.c @@ -0,0 +1,169 @@ +/* + * pci.c - DesignWare HS OTG Controller PCI driver + * + * Copyright (C) 2004-2013 Synopsys, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * Provides the initialization and cleanup entry points for the DWC_otg PCI + * driver + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/usb.h> + +#include <linux/usb/hcd.h> +#include <linux/usb/ch11.h> +#include <linux/platform_device.h> +#include <linux/usb/usb_phy_generic.h> + +#define PCI_PRODUCT_ID_HAPS_HSOTG 0xabc0 + +static const char dwc2_driver_name[] = "dwc2-pci"; + +struct dwc2_pci_glue { + struct platform_device *dwc2; + struct platform_device *phy; +}; + +static void dwc2_pci_remove(struct pci_dev *pci) +{ + struct dwc2_pci_glue *glue = pci_get_drvdata(pci); + + platform_device_unregister(glue->dwc2); + usb_phy_generic_unregister(glue->phy); + kfree(glue); + pci_set_drvdata(pci, NULL); +} + +static int dwc2_pci_probe(struct pci_dev *pci, + const struct pci_device_id *id) +{ + struct resource res[2]; + struct platform_device *dwc2; + struct platform_device *phy; + int ret; + struct device *dev = &pci->dev; + struct dwc2_pci_glue *glue; + + ret = pcim_enable_device(pci); + if (ret) { + dev_err(dev, "failed to enable pci device\n"); + return -ENODEV; + } + + pci_set_master(pci); + + dwc2 = platform_device_alloc("dwc2", PLATFORM_DEVID_AUTO); + if (!dwc2) { + dev_err(dev, "couldn't allocate dwc2 device\n"); + return -ENOMEM; + } + + memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res)); + + res[0].start = pci_resource_start(pci, 0); + res[0].end = pci_resource_end(pci, 0); + res[0].name = "dwc2"; + res[0].flags = IORESOURCE_MEM; + + res[1].start = pci->irq; + res[1].name = "dwc2"; + res[1].flags = IORESOURCE_IRQ; + + ret = platform_device_add_resources(dwc2, res, ARRAY_SIZE(res)); + if (ret) { + dev_err(dev, "couldn't add resources to dwc2 device\n"); + return ret; + } + + dwc2->dev.parent = dev; + + phy = usb_phy_generic_register(); + if (IS_ERR(phy)) { + dev_err(dev, "error registering generic PHY (%ld)\n", + PTR_ERR(phy)); + return PTR_ERR(phy); + } + + ret = platform_device_add(dwc2); + if (ret) { + dev_err(dev, "failed to register dwc2 device\n"); + goto err; + } + + glue = kzalloc(sizeof(*glue), GFP_KERNEL); + if (!glue) + return -ENOMEM; + + glue->phy = phy; + glue->dwc2 = dwc2; + pci_set_drvdata(pci, glue); + + return 0; +err: + usb_phy_generic_unregister(phy); + platform_device_put(dwc2); + return ret; +} + +static const struct pci_device_id dwc2_pci_ids[] = { + { + PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, PCI_PRODUCT_ID_HAPS_HSOTG), + }, + { + PCI_DEVICE(PCI_VENDOR_ID_STMICRO, + PCI_DEVICE_ID_STMICRO_USB_OTG), + }, + { /* end: all zeroes */ } +}; +MODULE_DEVICE_TABLE(pci, dwc2_pci_ids); + +static struct pci_driver dwc2_pci_driver = { + .name = dwc2_driver_name, + .id_table = dwc2_pci_ids, + .probe = dwc2_pci_probe, + .remove = dwc2_pci_remove, +}; + +module_pci_driver(dwc2_pci_driver); + +MODULE_DESCRIPTION("DESIGNWARE HS OTG PCI Bus Glue"); +MODULE_AUTHOR("Synopsys, Inc."); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/kernel/drivers/usb/dwc2/platform.c b/kernel/drivers/usb/dwc2/platform.c new file mode 100644 index 000000000..185663e0b --- /dev/null +++ b/kernel/drivers/usb/dwc2/platform.c @@ -0,0 +1,312 @@ +/* + * platform.c - DesignWare HS OTG Controller platform driver + * + * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation; either version 2 of the License, or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/of_device.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> + +#include <linux/usb/of.h> + +#include "core.h" +#include "hcd.h" + +static const char dwc2_driver_name[] = "dwc2"; + +static const struct dwc2_core_params params_bcm2835 = { + .otg_cap = 0, /* HNP/SRP capable */ + .otg_ver = 0, /* 1.3 */ + .dma_enable = 1, + .dma_desc_enable = 0, + .speed = 0, /* High Speed */ + .enable_dynamic_fifo = 1, + .en_multiple_tx_fifo = 1, + .host_rx_fifo_size = 774, /* 774 DWORDs */ + .host_nperio_tx_fifo_size = 256, /* 256 DWORDs */ + .host_perio_tx_fifo_size = 512, /* 512 DWORDs */ + .max_transfer_size = 65535, + .max_packet_count = 511, + .host_channels = 8, + .phy_type = 1, /* UTMI */ + .phy_utmi_width = 8, /* 8 bits */ + .phy_ulpi_ddr = 0, /* Single */ + .phy_ulpi_ext_vbus = 0, + .i2c_enable = 0, + .ulpi_fs_ls = 0, + .host_support_fs_ls_low_power = 0, + .host_ls_low_power_phy_clk = 0, /* 48 MHz */ + .ts_dline = 0, + .reload_ctl = 0, + .ahbcfg = 0x10, + .uframe_sched = 0, +}; + +static const struct dwc2_core_params params_rk3066 = { + .otg_cap = 2, /* non-HNP/non-SRP */ + .otg_ver = -1, + .dma_enable = -1, + .dma_desc_enable = 0, + .speed = -1, + .enable_dynamic_fifo = 1, + .en_multiple_tx_fifo = -1, + .host_rx_fifo_size = 520, /* 520 DWORDs */ + .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */ + .host_perio_tx_fifo_size = 256, /* 256 DWORDs */ + .max_transfer_size = 65535, + .max_packet_count = -1, + .host_channels = -1, + .phy_type = -1, + .phy_utmi_width = -1, + .phy_ulpi_ddr = -1, + .phy_ulpi_ext_vbus = -1, + .i2c_enable = -1, + .ulpi_fs_ls = -1, + .host_support_fs_ls_low_power = -1, + .host_ls_low_power_phy_clk = -1, + .ts_dline = -1, + .reload_ctl = -1, + .ahbcfg = 0x7, /* INCR16 */ + .uframe_sched = -1, +}; + +/** + * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the + * DWC_otg driver + * + * @dev: Platform device + * + * This routine is called, for example, when the rmmod command is executed. The + * device may or may not be electrically present. If it is present, the driver + * stops device processing. Any resources used on behalf of this device are + * freed. + */ +static int dwc2_driver_remove(struct platform_device *dev) +{ + struct dwc2_hsotg *hsotg = platform_get_drvdata(dev); + + if (hsotg->hcd_enabled) + dwc2_hcd_remove(hsotg); + if (hsotg->gadget_enabled) + s3c_hsotg_remove(hsotg); + + return 0; +} + +static const struct of_device_id dwc2_of_match_table[] = { + { .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 }, + { .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 }, + { .compatible = "snps,dwc2", .data = NULL }, + { .compatible = "samsung,s3c6400-hsotg", .data = NULL}, + {}, +}; +MODULE_DEVICE_TABLE(of, dwc2_of_match_table); + +/** + * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg + * driver + * + * @dev: Platform device + * + * This routine creates the driver components required to control the device + * (core, HCD, and PCD) and initializes the device. The driver components are + * stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved + * in the device private data. This allows the driver to access the dwc2_hsotg + * structure on subsequent calls to driver methods for this device. + */ +static int dwc2_driver_probe(struct platform_device *dev) +{ + const struct of_device_id *match; + const struct dwc2_core_params *params; + struct dwc2_core_params defparams; + struct dwc2_hsotg *hsotg; + struct resource *res; + struct phy *phy; + struct usb_phy *uphy; + int retval; + int irq; + + match = of_match_device(dwc2_of_match_table, &dev->dev); + if (match && match->data) { + params = match->data; + } else { + /* Default all params to autodetect */ + dwc2_set_all_params(&defparams, -1); + params = &defparams; + + /* + * Disable descriptor dma mode by default as the HW can support + * it, but does not support it for SPLIT transactions. + */ + defparams.dma_desc_enable = 0; + } + + hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL); + if (!hsotg) + return -ENOMEM; + + hsotg->dev = &dev->dev; + + /* + * Use reasonable defaults so platforms don't have to provide these. + */ + if (!dev->dev.dma_mask) + dev->dev.dma_mask = &dev->dev.coherent_dma_mask; + retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32)); + if (retval) + return retval; + + irq = platform_get_irq(dev, 0); + if (irq < 0) { + dev_err(&dev->dev, "missing IRQ resource\n"); + return irq; + } + + dev_dbg(hsotg->dev, "registering common handler for irq%d\n", + irq); + retval = devm_request_irq(hsotg->dev, irq, + dwc2_handle_common_intr, IRQF_SHARED, + dev_name(hsotg->dev), hsotg); + if (retval) + return retval; + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + hsotg->regs = devm_ioremap_resource(&dev->dev, res); + if (IS_ERR(hsotg->regs)) + return PTR_ERR(hsotg->regs); + + dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n", + (unsigned long)res->start, hsotg->regs); + + hsotg->dr_mode = of_usb_get_dr_mode(dev->dev.of_node); + + /* + * Attempt to find a generic PHY, then look for an old style + * USB PHY + */ + phy = devm_phy_get(&dev->dev, "usb2-phy"); + if (IS_ERR(phy)) { + hsotg->phy = NULL; + uphy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2); + if (IS_ERR(uphy)) + hsotg->uphy = NULL; + else + hsotg->uphy = uphy; + } else { + hsotg->phy = phy; + phy_power_on(hsotg->phy); + phy_init(hsotg->phy); + } + + spin_lock_init(&hsotg->lock); + mutex_init(&hsotg->init_mutex); + + if (hsotg->dr_mode != USB_DR_MODE_HOST) { + retval = dwc2_gadget_init(hsotg, irq); + if (retval) + return retval; + hsotg->gadget_enabled = 1; + } + + if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) { + retval = dwc2_hcd_init(hsotg, irq, params); + if (retval) { + if (hsotg->gadget_enabled) + s3c_hsotg_remove(hsotg); + return retval; + } + hsotg->hcd_enabled = 1; + } + + platform_set_drvdata(dev, hsotg); + + return retval; +} + +static int __maybe_unused dwc2_suspend(struct device *dev) +{ + struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev); + int ret = 0; + + if (dwc2_is_device_mode(dwc2)) { + ret = s3c_hsotg_suspend(dwc2); + } else { + if (dwc2->lx_state == DWC2_L0) + return 0; + phy_exit(dwc2->phy); + phy_power_off(dwc2->phy); + + } + return ret; +} + +static int __maybe_unused dwc2_resume(struct device *dev) +{ + struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev); + int ret = 0; + + if (dwc2_is_device_mode(dwc2)) { + ret = s3c_hsotg_resume(dwc2); + } else { + phy_power_on(dwc2->phy); + phy_init(dwc2->phy); + + } + return ret; +} + +static const struct dev_pm_ops dwc2_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume) +}; + +static struct platform_driver dwc2_platform_driver = { + .driver = { + .name = dwc2_driver_name, + .of_match_table = dwc2_of_match_table, + .pm = &dwc2_dev_pm_ops, + }, + .probe = dwc2_driver_probe, + .remove = dwc2_driver_remove, +}; + +module_platform_driver(dwc2_platform_driver); + +MODULE_DESCRIPTION("DESIGNWARE HS OTG Platform Glue"); +MODULE_AUTHOR("Matthijs Kooijman <matthijs@stdin.nl>"); +MODULE_LICENSE("Dual BSD/GPL"); |