summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/tty')
-rw-r--r--kernel/drivers/tty/n_tty.c16
-rw-r--r--kernel/drivers/tty/serial/Kconfig2
-rw-r--r--kernel/drivers/tty/serial/atmel_serial.c9
-rw-r--r--kernel/drivers/tty/serial/imx.c15
-rw-r--r--kernel/drivers/tty/serial/serial_core.c3
-rw-r--r--kernel/drivers/tty/sysrq.c19
6 files changed, 27 insertions, 37 deletions
diff --git a/kernel/drivers/tty/n_tty.c b/kernel/drivers/tty/n_tty.c
index 396344cb0..16ed0b6c7 100644
--- a/kernel/drivers/tty/n_tty.c
+++ b/kernel/drivers/tty/n_tty.c
@@ -1108,19 +1108,29 @@ static void eraser(unsigned char c, struct tty_struct *tty)
* Locking: ctrl_lock
*/
-static void isig(int sig, struct tty_struct *tty)
+static void __isig(int sig, struct tty_struct *tty)
{
- struct n_tty_data *ldata = tty->disc_data;
struct pid *tty_pgrp = tty_get_pgrp(tty);
if (tty_pgrp) {
kill_pgrp(tty_pgrp, sig, 1);
put_pid(tty_pgrp);
}
+}
- if (!L_NOFLSH(tty)) {
+static void isig(int sig, struct tty_struct *tty)
+{
+ struct n_tty_data *ldata = tty->disc_data;
+
+ if (L_NOFLSH(tty)) {
+ /* signal only */
+ __isig(sig, tty);
+
+ } else { /* signal and flush */
up_read(&tty->termios_rwsem);
down_write(&tty->termios_rwsem);
+ __isig(sig, tty);
+
/* clear echo buffer */
mutex_lock(&ldata->output_lock);
ldata->echo_head = ldata->echo_tail = 0;
diff --git a/kernel/drivers/tty/serial/Kconfig b/kernel/drivers/tty/serial/Kconfig
index f8120c1bd..8cd35348f 100644
--- a/kernel/drivers/tty/serial/Kconfig
+++ b/kernel/drivers/tty/serial/Kconfig
@@ -241,7 +241,6 @@ config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
depends on PLAT_SAMSUNG || ARCH_EXYNOS
select SERIAL_CORE
- select SERIAL_EARLYCON
help
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
providing /dev/ttySAC0, 1 and 2 (note, some machines may not
@@ -277,6 +276,7 @@ config SERIAL_SAMSUNG_CONSOLE
bool "Support for console on Samsung SoC serial port"
depends on SERIAL_SAMSUNG=y
select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
help
Allow selection of the S3C24XX on-board serial ports for use as
an virtual console.
diff --git a/kernel/drivers/tty/serial/atmel_serial.c b/kernel/drivers/tty/serial/atmel_serial.c
index 27dade296..5ca1dfb05 100644
--- a/kernel/drivers/tty/serial/atmel_serial.c
+++ b/kernel/drivers/tty/serial/atmel_serial.c
@@ -315,8 +315,7 @@ static int atmel_config_rs485(struct uart_port *port,
if (rs485conf->flags & SER_RS485_ENABLED) {
dev_dbg(port->dev, "Setting UART to RS485\n");
atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
- if ((rs485conf->delay_rts_after_send) > 0)
- UART_PUT_TTGR(port, rs485conf->delay_rts_after_send);
+ UART_PUT_TTGR(port, rs485conf->delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
} else {
dev_dbg(port->dev, "Setting UART to RS232\n");
@@ -354,8 +353,7 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
/* override mode to RS485 if needed, otherwise keep the current mode */
if (port->rs485.flags & SER_RS485_ENABLED) {
- if ((port->rs485.delay_rts_after_send) > 0)
- UART_PUT_TTGR(port, port->rs485.delay_rts_after_send);
+ UART_PUT_TTGR(port, port->rs485.delay_rts_after_send);
mode &= ~ATMEL_US_USMODE;
mode |= ATMEL_US_USMODE_RS485;
}
@@ -2061,8 +2059,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
/* mode */
if (port->rs485.flags & SER_RS485_ENABLED) {
- if ((port->rs485.delay_rts_after_send) > 0)
- UART_PUT_TTGR(port, port->rs485.delay_rts_after_send);
+ UART_PUT_TTGR(port, port->rs485.delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
} else if (termios->c_cflag & CRTSCTS) {
/* RS232 with hardware handshake (RTS/CTS) */
diff --git a/kernel/drivers/tty/serial/imx.c b/kernel/drivers/tty/serial/imx.c
index 88250395b..01aa52f57 100644
--- a/kernel/drivers/tty/serial/imx.c
+++ b/kernel/drivers/tty/serial/imx.c
@@ -1132,11 +1132,6 @@ static int imx_startup(struct uart_port *port)
while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0))
udelay(1);
- /* Can we enable the DMA support? */
- if (is_imx6q_uart(sport) && !uart_console(port) &&
- !sport->dma_is_inited)
- imx_uart_dma_init(sport);
-
spin_lock_irqsave(&sport->port.lock, flags);
/*
@@ -1145,9 +1140,6 @@ static int imx_startup(struct uart_port *port)
writel(USR1_RTSD, sport->port.membase + USR1);
writel(USR2_ORE, sport->port.membase + USR2);
- if (sport->dma_is_inited && !sport->dma_is_enabled)
- imx_enable_dma(sport);
-
temp = readl(sport->port.membase + UCR1);
temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
@@ -1318,6 +1310,11 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
} else {
ucr2 |= UCR2_CTSC;
}
+
+ /* Can we enable the DMA support? */
+ if (is_imx6q_uart(sport) && !uart_console(port)
+ && !sport->dma_is_inited)
+ imx_uart_dma_init(sport);
} else {
termios->c_cflag &= ~CRTSCTS;
}
@@ -1434,6 +1431,8 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
imx_enable_ms(&sport->port);
+ if (sport->dma_is_inited && !sport->dma_is_enabled)
+ imx_enable_dma(sport);
spin_unlock_irqrestore(&sport->port.lock, flags);
}
diff --git a/kernel/drivers/tty/serial/serial_core.c b/kernel/drivers/tty/serial/serial_core.c
index 0b7bb12df..ec540445b 100644
--- a/kernel/drivers/tty/serial/serial_core.c
+++ b/kernel/drivers/tty/serial/serial_core.c
@@ -1409,7 +1409,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
mutex_lock(&port->mutex);
uart_shutdown(tty, state);
tty_port_tty_set(port, NULL);
- tty->closing = 0;
+
spin_lock_irqsave(&port->lock, flags);
if (port->blocked_open) {
@@ -1435,6 +1435,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
mutex_unlock(&port->mutex);
tty_ldisc_flush(tty);
+ tty->closing = 0;
}
static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
diff --git a/kernel/drivers/tty/sysrq.c b/kernel/drivers/tty/sysrq.c
index 843f2cdc2..9ffdfcf2e 100644
--- a/kernel/drivers/tty/sysrq.c
+++ b/kernel/drivers/tty/sysrq.c
@@ -55,9 +55,6 @@
static int __read_mostly sysrq_enabled = CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE;
static bool __read_mostly sysrq_always_enabled;
-unsigned short platform_sysrq_reset_seq[] __weak = { KEY_RESERVED };
-int sysrq_reset_downtime_ms __weak;
-
static bool sysrq_on(void)
{
return sysrq_enabled || sysrq_always_enabled;
@@ -569,6 +566,7 @@ void handle_sysrq(int key)
EXPORT_SYMBOL(handle_sysrq);
#ifdef CONFIG_INPUT
+static int sysrq_reset_downtime_ms;
/* Simple translation table for the SysRq keys */
static const unsigned char sysrq_xlate[KEY_CNT] =
@@ -949,23 +947,8 @@ static bool sysrq_handler_registered;
static inline void sysrq_register_handler(void)
{
- unsigned short key;
int error;
- int i;
-
- /* First check if a __weak interface was instantiated. */
- for (i = 0; i < ARRAY_SIZE(sysrq_reset_seq); i++) {
- key = platform_sysrq_reset_seq[i];
- if (key == KEY_RESERVED || key > KEY_MAX)
- break;
-
- sysrq_reset_seq[sysrq_reset_seq_len++] = key;
- }
- /*
- * DT configuration takes precedence over anything that would
- * have been defined via the __weak interface.
- */
sysrq_of_get_keyreset_config();
error = input_register_handler(&sysrq_handler);