summaryrefslogtreecommitdiffstats
path: root/kernel/drivers/tty/serial
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/drivers/tty/serial')
-rw-r--r--kernel/drivers/tty/serial/68328serial.c8
-rw-r--r--kernel/drivers/tty/serial/8250/8250.h17
-rw-r--r--kernel/drivers/tty/serial/8250/8250_core.c2928
-rw-r--r--kernel/drivers/tty/serial/8250/8250_dma.c10
-rw-r--r--kernel/drivers/tty/serial/8250/8250_dw.c302
-rw-r--r--kernel/drivers/tty/serial/8250/8250_early.c10
-rw-r--r--kernel/drivers/tty/serial/8250/8250_fintek.c172
-rw-r--r--kernel/drivers/tty/serial/8250/8250_fsl.c1
-rw-r--r--kernel/drivers/tty/serial/8250/8250_ingenic.c345
-rw-r--r--kernel/drivers/tty/serial/8250/8250_lpc18xx.c230
-rw-r--r--kernel/drivers/tty/serial/8250/8250_mid.c326
-rw-r--r--kernel/drivers/tty/serial/8250/8250_mtk.c119
-rw-r--r--kernel/drivers/tty/serial/8250/8250_omap.c276
-rw-r--r--kernel/drivers/tty/serial/8250/8250_pci.c382
-rw-r--r--kernel/drivers/tty/serial/8250/8250_port.c2935
-rw-r--r--kernel/drivers/tty/serial/8250/8250_uniphier.c262
-rw-r--r--kernel/drivers/tty/serial/8250/Kconfig48
-rw-r--r--kernel/drivers/tty/serial/8250/Makefile11
-rw-r--r--kernel/drivers/tty/serial/Kconfig88
-rw-r--r--kernel/drivers/tty/serial/Makefile4
-rw-r--r--kernel/drivers/tty/serial/altera_jtaguart.c2
-rw-r--r--kernel/drivers/tty/serial/altera_uart.c28
-rw-r--r--kernel/drivers/tty/serial/amba-pl011.c659
-rw-r--r--kernel/drivers/tty/serial/apbuart.c1
-rw-r--r--kernel/drivers/tty/serial/atmel_serial.c526
-rw-r--r--kernel/drivers/tty/serial/bcm63xx_uart.c2
-rw-r--r--kernel/drivers/tty/serial/bfin_uart.c24
-rw-r--r--kernel/drivers/tty/serial/clps711x.c2
-rw-r--r--kernel/drivers/tty/serial/cpm_uart/cpm_uart_core.c1
-rw-r--r--kernel/drivers/tty/serial/crisv10.c140
-rw-r--r--kernel/drivers/tty/serial/earlycon.c11
-rw-r--r--kernel/drivers/tty/serial/etraxfs-uart.c61
-rw-r--r--kernel/drivers/tty/serial/fsl_lpuart.c39
-rw-r--r--kernel/drivers/tty/serial/icom.c11
-rw-r--r--kernel/drivers/tty/serial/ifx6x60.c21
-rw-r--r--kernel/drivers/tty/serial/imx.c364
-rw-r--r--kernel/drivers/tty/serial/ioc3_serial.c3
-rw-r--r--kernel/drivers/tty/serial/ioc4_serial.c9
-rw-r--r--kernel/drivers/tty/serial/kgdb_nmi.c6
-rw-r--r--kernel/drivers/tty/serial/lantiq.c8
-rw-r--r--kernel/drivers/tty/serial/lpc32xx_hs.c7
-rw-r--r--kernel/drivers/tty/serial/max3100.c1
-rw-r--r--kernel/drivers/tty/serial/max310x.c1
-rw-r--r--kernel/drivers/tty/serial/mcf.c2
-rw-r--r--kernel/drivers/tty/serial/men_z135_uart.c24
-rw-r--r--kernel/drivers/tty/serial/meson_uart.c2
-rw-r--r--kernel/drivers/tty/serial/mpc52xx_uart.c14
-rw-r--r--kernel/drivers/tty/serial/mpsc.c66
-rw-r--r--kernel/drivers/tty/serial/msm_serial.c622
-rw-r--r--kernel/drivers/tty/serial/msm_serial.h53
-rw-r--r--kernel/drivers/tty/serial/msm_smd_tty.c232
-rw-r--r--kernel/drivers/tty/serial/mux.c9
-rw-r--r--kernel/drivers/tty/serial/mxs-auart.c62
-rw-r--r--kernel/drivers/tty/serial/of_serial.c18
-rw-r--r--kernel/drivers/tty/serial/omap-serial.c45
-rw-r--r--kernel/drivers/tty/serial/samsung.c71
-rw-r--r--kernel/drivers/tty/serial/sc16is7xx.c457
-rw-r--r--kernel/drivers/tty/serial/serial-tegra.c240
-rw-r--r--kernel/drivers/tty/serial/serial_core.c62
-rw-r--r--kernel/drivers/tty/serial/serial_ks8695.c2
-rw-r--r--kernel/drivers/tty/serial/serial_mctrl_gpio.c140
-rw-r--r--kernel/drivers/tty/serial/serial_mctrl_gpio.h40
-rw-r--r--kernel/drivers/tty/serial/sh-sci.c1324
-rw-r--r--kernel/drivers/tty/serial/sh-sci.h141
-rw-r--r--kernel/drivers/tty/serial/sirfsoc_uart.c714
-rw-r--r--kernel/drivers/tty/serial/sirfsoc_uart.h125
-rw-r--r--kernel/drivers/tty/serial/sn_console.c32
-rw-r--r--kernel/drivers/tty/serial/sprd_serial.c3
-rw-r--r--kernel/drivers/tty/serial/st-asc.c2
-rw-r--r--kernel/drivers/tty/serial/stm32-usart.c738
-rw-r--r--kernel/drivers/tty/serial/suncore.c11
-rw-r--r--kernel/drivers/tty/serial/sunhv.c25
-rw-r--r--kernel/drivers/tty/serial/ucc_uart.c2
-rw-r--r--kernel/drivers/tty/serial/xilinx_uartps.c3
74 files changed, 9458 insertions, 6224 deletions
diff --git a/kernel/drivers/tty/serial/68328serial.c b/kernel/drivers/tty/serial/68328serial.c
index 5dc9c4bfa..0140ba4aa 100644
--- a/kernel/drivers/tty/serial/68328serial.c
+++ b/kernel/drivers/tty/serial/68328serial.c
@@ -508,7 +508,8 @@ static void change_speed(struct m68k_serial *info, struct tty_struct *tty)
int i;
cflag = tty->termios.c_cflag;
- if (!(port = info->port))
+ port = info->port;
+ if (!port)
return;
ustcnt = uart->ustcnt;
@@ -559,8 +560,8 @@ static void rs_fair_output(void)
struct m68k_serial *info = &m68k_soft[0];
char c;
- if (info == 0) return;
- if (info->xmit_buf == 0) return;
+ if (info == NULL) return;
+ if (info->xmit_buf == NULL) return;
local_irq_save(flags);
left = info->xmit_cnt;
@@ -1070,7 +1071,6 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
wake_up_interruptible(&port->open_wait);
}
port->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&port->close_wait);
local_irq_restore(flags);
}
diff --git a/kernel/drivers/tty/serial/8250/8250.h b/kernel/drivers/tty/serial/8250/8250.h
index c43f74c53..d54dcd87c 100644
--- a/kernel/drivers/tty/serial/8250/8250.h
+++ b/kernel/drivers/tty/serial/8250/8250.h
@@ -42,9 +42,9 @@ struct uart_8250_dma {
size_t rx_size;
size_t tx_size;
- unsigned char tx_running:1;
- unsigned char tx_err: 1;
- unsigned char rx_running:1;
+ unsigned char tx_running;
+ unsigned char tx_err;
+ unsigned char rx_running;
};
struct old_serial_port {
@@ -211,3 +211,14 @@ static inline int ns16550a_goto_highspeed(struct uart_8250_port *up)
}
return 1;
}
+
+static inline int serial_index(struct uart_port *port)
+{
+ return port->minor - 64;
+}
+
+#if 0
+#define DEBUG_INTR(fmt...) printk(fmt)
+#else
+#define DEBUG_INTR(fmt...) do { } while (0)
+#endif
diff --git a/kernel/drivers/tty/serial/8250/8250_core.c b/kernel/drivers/tty/serial/8250/8250_core.c
index 822a2e197..af7701ca4 100644
--- a/kernel/drivers/tty/serial/8250/8250_core.c
+++ b/kernel/drivers/tty/serial/8250/8250_core.c
@@ -1,25 +1,23 @@
/*
- * Driver for 8250/16550-type serial ports
+ * Universal/legacy driver for 8250/16550-type serial ports
*
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
*
* Copyright (C) 2001 Russell King.
*
+ * Supports: ISA-compatible 8250/16550 ports
+ * PNP 8250/16550 ports
+ * early_serial_setup() ports
+ * userspace-configurable "phantom" ports
+ * "serial8250" platform devices
+ * serial8250_register_8250_port() ports
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
- * A note about mapbase / membase
- *
- * mapbase is the physical address of the IO port.
- * membase is an 'ioremapped' cookie.
*/
-#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/ioport.h>
@@ -36,14 +34,13 @@
#include <linux/nmi.h>
#include <linux/mutex.h>
#include <linux/slab.h>
-#include <linux/kdb.h>
#include <linux/uaccess.h>
#include <linux/pm_runtime.h>
+#include <linux/io.h>
#ifdef CONFIG_SPARC
#include <linux/sunserialcore.h>
#endif
-#include <asm/io.h>
#include <asm/irq.h>
#include "8250.h"
@@ -59,29 +56,9 @@ static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;
static struct uart_driver serial8250_reg;
-static int serial_index(struct uart_port *port)
-{
- return port->minor - 64;
-}
-
static unsigned int skip_txen_test; /* force skip of txen test at init time */
/*
- * Debugging.
- */
-#if 0
-#define DEBUG_AUTOCONF(fmt...) printk(fmt)
-#else
-#define DEBUG_AUTOCONF(fmt...) do { } while (0)
-#endif
-
-#if 0
-#define DEBUG_INTR(fmt...) printk(fmt)
-#else
-#define DEBUG_INTR(fmt...) do { } while (0)
-#endif
-
-/*
* On -rt we can have a more delays, and legitimately
* so - so don't drop work spuriously and spam the
* syslog:
@@ -92,22 +69,6 @@ static unsigned int skip_txen_test; /* force skip of txen test at init time */
# define PASS_LIMIT 512
#endif
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
-
-#ifdef CONFIG_SERIAL_8250_DETECT_IRQ
-#define CONFIG_SERIAL_DETECT_IRQ 1
-#endif
-#ifdef CONFIG_SERIAL_8250_MANY_PORTS
-#define CONFIG_SERIAL_MANY_PORTS 1
-#endif
-
-/*
- * HUB6 is always on. This will be removed once the header
- * files have been cleaned.
- */
-#define CONFIG_HUB6 1
-
#include <asm/serial.h>
/*
* SERIAL_PORT_DFNS tells us about built-in ports that have no
@@ -143,1563 +104,6 @@ static struct hlist_head irq_lists[NR_IRQ_HASH];
static DEFINE_MUTEX(hash_mutex); /* Used to walk the hash */
/*
- * Here we define the default xmit fifo size used for each type of UART.
- */
-static const struct serial8250_config uart_config[] = {
- [PORT_UNKNOWN] = {
- .name = "unknown",
- .fifo_size = 1,
- .tx_loadsz = 1,
- },
- [PORT_8250] = {
- .name = "8250",
- .fifo_size = 1,
- .tx_loadsz = 1,
- },
- [PORT_16450] = {
- .name = "16450",
- .fifo_size = 1,
- .tx_loadsz = 1,
- },
- [PORT_16550] = {
- .name = "16550",
- .fifo_size = 1,
- .tx_loadsz = 1,
- },
- [PORT_16550A] = {
- .name = "16550A",
- .fifo_size = 16,
- .tx_loadsz = 16,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .rxtrig_bytes = {1, 4, 8, 14},
- .flags = UART_CAP_FIFO,
- },
- [PORT_CIRRUS] = {
- .name = "Cirrus",
- .fifo_size = 1,
- .tx_loadsz = 1,
- },
- [PORT_16650] = {
- .name = "ST16650",
- .fifo_size = 1,
- .tx_loadsz = 1,
- .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
- },
- [PORT_16650V2] = {
- .name = "ST16650V2",
- .fifo_size = 32,
- .tx_loadsz = 16,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
- UART_FCR_T_TRIG_00,
- .rxtrig_bytes = {8, 16, 24, 28},
- .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
- },
- [PORT_16750] = {
- .name = "TI16750",
- .fifo_size = 64,
- .tx_loadsz = 64,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
- UART_FCR7_64BYTE,
- .rxtrig_bytes = {1, 16, 32, 56},
- .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE,
- },
- [PORT_STARTECH] = {
- .name = "Startech",
- .fifo_size = 1,
- .tx_loadsz = 1,
- },
- [PORT_16C950] = {
- .name = "16C950/954",
- .fifo_size = 128,
- .tx_loadsz = 128,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- /* UART_CAP_EFR breaks billionon CF bluetooth card. */
- .flags = UART_CAP_FIFO | UART_CAP_SLEEP,
- },
- [PORT_16654] = {
- .name = "ST16654",
- .fifo_size = 64,
- .tx_loadsz = 32,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
- UART_FCR_T_TRIG_10,
- .rxtrig_bytes = {8, 16, 56, 60},
- .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
- },
- [PORT_16850] = {
- .name = "XR16850",
- .fifo_size = 128,
- .tx_loadsz = 128,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
- },
- [PORT_RSA] = {
- .name = "RSA",
- .fifo_size = 2048,
- .tx_loadsz = 2048,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11,
- .flags = UART_CAP_FIFO,
- },
- [PORT_NS16550A] = {
- .name = "NS16550A",
- .fifo_size = 16,
- .tx_loadsz = 16,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_NATSEMI,
- },
- [PORT_XSCALE] = {
- .name = "XScale",
- .fifo_size = 32,
- .tx_loadsz = 32,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_UUE | UART_CAP_RTOIE,
- },
- [PORT_OCTEON] = {
- .name = "OCTEON",
- .fifo_size = 64,
- .tx_loadsz = 64,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO,
- },
- [PORT_AR7] = {
- .name = "AR7",
- .fifo_size = 16,
- .tx_loadsz = 16,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
- .flags = UART_CAP_FIFO | UART_CAP_AFE,
- },
- [PORT_U6_16550A] = {
- .name = "U6_16550A",
- .fifo_size = 64,
- .tx_loadsz = 64,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_AFE,
- },
- [PORT_TEGRA] = {
- .name = "Tegra",
- .fifo_size = 32,
- .tx_loadsz = 8,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
- UART_FCR_T_TRIG_01,
- .rxtrig_bytes = {1, 4, 8, 14},
- .flags = UART_CAP_FIFO | UART_CAP_RTOIE,
- },
- [PORT_XR17D15X] = {
- .name = "XR17D15X",
- .fifo_size = 64,
- .tx_loadsz = 64,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR |
- UART_CAP_SLEEP,
- },
- [PORT_XR17V35X] = {
- .name = "XR17V35X",
- .fifo_size = 256,
- .tx_loadsz = 256,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11 |
- UART_FCR_T_TRIG_11,
- .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR |
- UART_CAP_SLEEP,
- },
- [PORT_LPC3220] = {
- .name = "LPC3220",
- .fifo_size = 64,
- .tx_loadsz = 32,
- .fcr = UART_FCR_DMA_SELECT | UART_FCR_ENABLE_FIFO |
- UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00,
- .flags = UART_CAP_FIFO,
- },
- [PORT_BRCM_TRUMANAGE] = {
- .name = "TruManage",
- .fifo_size = 1,
- .tx_loadsz = 1024,
- .flags = UART_CAP_HFIFO,
- },
- [PORT_8250_CIR] = {
- .name = "CIR port"
- },
- [PORT_ALTR_16550_F32] = {
- .name = "Altera 16550 FIFO32",
- .fifo_size = 32,
- .tx_loadsz = 32,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_AFE,
- },
- [PORT_ALTR_16550_F64] = {
- .name = "Altera 16550 FIFO64",
- .fifo_size = 64,
- .tx_loadsz = 64,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_AFE,
- },
- [PORT_ALTR_16550_F128] = {
- .name = "Altera 16550 FIFO128",
- .fifo_size = 128,
- .tx_loadsz = 128,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_AFE,
- },
-/* tx_loadsz is set to 63-bytes instead of 64-bytes to implement
-workaround of errata A-008006 which states that tx_loadsz should be
-configured less than Maximum supported fifo bytes */
- [PORT_16550A_FSL64] = {
- .name = "16550A_FSL64",
- .fifo_size = 64,
- .tx_loadsz = 63,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
- UART_FCR7_64BYTE,
- .flags = UART_CAP_FIFO,
- },
-};
-
-/* Uart divisor latch read */
-static int default_serial_dl_read(struct uart_8250_port *up)
-{
- return serial_in(up, UART_DLL) | serial_in(up, UART_DLM) << 8;
-}
-
-/* Uart divisor latch write */
-static void default_serial_dl_write(struct uart_8250_port *up, int value)
-{
- serial_out(up, UART_DLL, value & 0xff);
- serial_out(up, UART_DLM, value >> 8 & 0xff);
-}
-
-#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
-
-/* Au1x00/RT288x UART hardware has a weird register layout */
-static const s8 au_io_in_map[8] = {
- 0, /* UART_RX */
- 2, /* UART_IER */
- 3, /* UART_IIR */
- 5, /* UART_LCR */
- 6, /* UART_MCR */
- 7, /* UART_LSR */
- 8, /* UART_MSR */
- -1, /* UART_SCR (unmapped) */
-};
-
-static const s8 au_io_out_map[8] = {
- 1, /* UART_TX */
- 2, /* UART_IER */
- 4, /* UART_FCR */
- 5, /* UART_LCR */
- 6, /* UART_MCR */
- -1, /* UART_LSR (unmapped) */
- -1, /* UART_MSR (unmapped) */
- -1, /* UART_SCR (unmapped) */
-};
-
-static unsigned int au_serial_in(struct uart_port *p, int offset)
-{
- if (offset >= ARRAY_SIZE(au_io_in_map))
- return UINT_MAX;
- offset = au_io_in_map[offset];
- if (offset < 0)
- return UINT_MAX;
- return __raw_readl(p->membase + (offset << p->regshift));
-}
-
-static void au_serial_out(struct uart_port *p, int offset, int value)
-{
- if (offset >= ARRAY_SIZE(au_io_out_map))
- return;
- offset = au_io_out_map[offset];
- if (offset < 0)
- return;
- __raw_writel(value, p->membase + (offset << p->regshift));
-}
-
-/* Au1x00 haven't got a standard divisor latch */
-static int au_serial_dl_read(struct uart_8250_port *up)
-{
- return __raw_readl(up->port.membase + 0x28);
-}
-
-static void au_serial_dl_write(struct uart_8250_port *up, int value)
-{
- __raw_writel(value, up->port.membase + 0x28);
-}
-
-#endif
-
-static unsigned int hub6_serial_in(struct uart_port *p, int offset)
-{
- offset = offset << p->regshift;
- outb(p->hub6 - 1 + offset, p->iobase);
- return inb(p->iobase + 1);
-}
-
-static void hub6_serial_out(struct uart_port *p, int offset, int value)
-{
- offset = offset << p->regshift;
- outb(p->hub6 - 1 + offset, p->iobase);
- outb(value, p->iobase + 1);
-}
-
-static unsigned int mem_serial_in(struct uart_port *p, int offset)
-{
- offset = offset << p->regshift;
- return readb(p->membase + offset);
-}
-
-static void mem_serial_out(struct uart_port *p, int offset, int value)
-{
- offset = offset << p->regshift;
- writeb(value, p->membase + offset);
-}
-
-static void mem32_serial_out(struct uart_port *p, int offset, int value)
-{
- offset = offset << p->regshift;
- writel(value, p->membase + offset);
-}
-
-static unsigned int mem32_serial_in(struct uart_port *p, int offset)
-{
- offset = offset << p->regshift;
- return readl(p->membase + offset);
-}
-
-static void mem32be_serial_out(struct uart_port *p, int offset, int value)
-{
- offset = offset << p->regshift;
- iowrite32be(value, p->membase + offset);
-}
-
-static unsigned int mem32be_serial_in(struct uart_port *p, int offset)
-{
- offset = offset << p->regshift;
- return ioread32be(p->membase + offset);
-}
-
-static unsigned int io_serial_in(struct uart_port *p, int offset)
-{
- offset = offset << p->regshift;
- return inb(p->iobase + offset);
-}
-
-static void io_serial_out(struct uart_port *p, int offset, int value)
-{
- offset = offset << p->regshift;
- outb(value, p->iobase + offset);
-}
-
-static int serial8250_default_handle_irq(struct uart_port *port);
-static int exar_handle_irq(struct uart_port *port);
-
-static void set_io_from_upio(struct uart_port *p)
-{
- struct uart_8250_port *up = up_to_u8250p(p);
-
- up->dl_read = default_serial_dl_read;
- up->dl_write = default_serial_dl_write;
-
- switch (p->iotype) {
- case UPIO_HUB6:
- p->serial_in = hub6_serial_in;
- p->serial_out = hub6_serial_out;
- break;
-
- case UPIO_MEM:
- p->serial_in = mem_serial_in;
- p->serial_out = mem_serial_out;
- break;
-
- case UPIO_MEM32:
- p->serial_in = mem32_serial_in;
- p->serial_out = mem32_serial_out;
- break;
-
- case UPIO_MEM32BE:
- p->serial_in = mem32be_serial_in;
- p->serial_out = mem32be_serial_out;
- break;
-
-#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
- case UPIO_AU:
- p->serial_in = au_serial_in;
- p->serial_out = au_serial_out;
- up->dl_read = au_serial_dl_read;
- up->dl_write = au_serial_dl_write;
- break;
-#endif
-
- default:
- p->serial_in = io_serial_in;
- p->serial_out = io_serial_out;
- break;
- }
- /* Remember loaded iotype */
- up->cur_iotype = p->iotype;
- p->handle_irq = serial8250_default_handle_irq;
-}
-
-static void
-serial_port_out_sync(struct uart_port *p, int offset, int value)
-{
- switch (p->iotype) {
- case UPIO_MEM:
- case UPIO_MEM32:
- case UPIO_MEM32BE:
- case UPIO_AU:
- p->serial_out(p, offset, value);
- p->serial_in(p, UART_LCR); /* safe, no side-effects */
- break;
- default:
- p->serial_out(p, offset, value);
- }
-}
-
-/*
- * For the 16C950
- */
-static void serial_icr_write(struct uart_8250_port *up, int offset, int value)
-{
- serial_out(up, UART_SCR, offset);
- serial_out(up, UART_ICR, value);
-}
-
-static unsigned int serial_icr_read(struct uart_8250_port *up, int offset)
-{
- unsigned int value;
-
- serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
- serial_out(up, UART_SCR, offset);
- value = serial_in(up, UART_ICR);
- serial_icr_write(up, UART_ACR, up->acr);
-
- return value;
-}
-
-/*
- * FIFO support.
- */
-static void serial8250_clear_fifos(struct uart_8250_port *p)
-{
- if (p->capabilities & UART_CAP_FIFO) {
- serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO);
- serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO |
- UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
- serial_out(p, UART_FCR, 0);
- }
-}
-
-void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p)
-{
- serial8250_clear_fifos(p);
- serial_out(p, UART_FCR, p->fcr);
-}
-EXPORT_SYMBOL_GPL(serial8250_clear_and_reinit_fifos);
-
-void serial8250_rpm_get(struct uart_8250_port *p)
-{
- if (!(p->capabilities & UART_CAP_RPM))
- return;
- pm_runtime_get_sync(p->port.dev);
-}
-EXPORT_SYMBOL_GPL(serial8250_rpm_get);
-
-void serial8250_rpm_put(struct uart_8250_port *p)
-{
- if (!(p->capabilities & UART_CAP_RPM))
- return;
- pm_runtime_mark_last_busy(p->port.dev);
- pm_runtime_put_autosuspend(p->port.dev);
-}
-EXPORT_SYMBOL_GPL(serial8250_rpm_put);
-
-/*
- * These two wrappers ensure that enable_runtime_pm_tx() can be called more than
- * once and disable_runtime_pm_tx() will still disable RPM because the fifo is
- * empty and the HW can idle again.
- */
-static void serial8250_rpm_get_tx(struct uart_8250_port *p)
-{
- unsigned char rpm_active;
-
- if (!(p->capabilities & UART_CAP_RPM))
- return;
-
- rpm_active = xchg(&p->rpm_tx_active, 1);
- if (rpm_active)
- return;
- pm_runtime_get_sync(p->port.dev);
-}
-
-static void serial8250_rpm_put_tx(struct uart_8250_port *p)
-{
- unsigned char rpm_active;
-
- if (!(p->capabilities & UART_CAP_RPM))
- return;
-
- rpm_active = xchg(&p->rpm_tx_active, 0);
- if (!rpm_active)
- return;
- pm_runtime_mark_last_busy(p->port.dev);
- pm_runtime_put_autosuspend(p->port.dev);
-}
-
-/*
- * IER sleep support. UARTs which have EFRs need the "extended
- * capability" bit enabled. Note that on XR16C850s, we need to
- * reset LCR to write to IER.
- */
-static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
-{
- unsigned char lcr = 0, efr = 0;
- /*
- * Exar UARTs have a SLEEP register that enables or disables
- * each UART to enter sleep mode separately. On the XR17V35x the
- * register is accessible to each UART at the UART_EXAR_SLEEP
- * offset but the UART channel may only write to the corresponding
- * bit.
- */
- serial8250_rpm_get(p);
- if ((p->port.type == PORT_XR17V35X) ||
- (p->port.type == PORT_XR17D15X)) {
- serial_out(p, UART_EXAR_SLEEP, sleep ? 0xff : 0);
- goto out;
- }
-
- if (p->capabilities & UART_CAP_SLEEP) {
- if (p->capabilities & UART_CAP_EFR) {
- lcr = serial_in(p, UART_LCR);
- efr = serial_in(p, UART_EFR);
- serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_out(p, UART_EFR, UART_EFR_ECB);
- serial_out(p, UART_LCR, 0);
- }
- serial_out(p, UART_IER, sleep ? UART_IERX_SLEEP : 0);
- if (p->capabilities & UART_CAP_EFR) {
- serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_out(p, UART_EFR, efr);
- serial_out(p, UART_LCR, lcr);
- }
- }
-out:
- serial8250_rpm_put(p);
-}
-
-#ifdef CONFIG_SERIAL_8250_RSA
-/*
- * Attempts to turn on the RSA FIFO. Returns zero on failure.
- * We set the port uart clock rate if we succeed.
- */
-static int __enable_rsa(struct uart_8250_port *up)
-{
- unsigned char mode;
- int result;
-
- mode = serial_in(up, UART_RSA_MSR);
- result = mode & UART_RSA_MSR_FIFO;
-
- if (!result) {
- serial_out(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
- mode = serial_in(up, UART_RSA_MSR);
- result = mode & UART_RSA_MSR_FIFO;
- }
-
- if (result)
- up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
-
- return result;
-}
-
-static void enable_rsa(struct uart_8250_port *up)
-{
- if (up->port.type == PORT_RSA) {
- if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
- spin_lock_irq(&up->port.lock);
- __enable_rsa(up);
- spin_unlock_irq(&up->port.lock);
- }
- if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
- serial_out(up, UART_RSA_FRR, 0);
- }
-}
-
-/*
- * Attempts to turn off the RSA FIFO. Returns zero on failure.
- * It is unknown why interrupts were disabled in here. However,
- * the caller is expected to preserve this behaviour by grabbing
- * the spinlock before calling this function.
- */
-static void disable_rsa(struct uart_8250_port *up)
-{
- unsigned char mode;
- int result;
-
- if (up->port.type == PORT_RSA &&
- up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
- spin_lock_irq(&up->port.lock);
-
- mode = serial_in(up, UART_RSA_MSR);
- result = !(mode & UART_RSA_MSR_FIFO);
-
- if (!result) {
- serial_out(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
- mode = serial_in(up, UART_RSA_MSR);
- result = !(mode & UART_RSA_MSR_FIFO);
- }
-
- if (result)
- up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
- spin_unlock_irq(&up->port.lock);
- }
-}
-#endif /* CONFIG_SERIAL_8250_RSA */
-
-/*
- * This is a quickie test to see how big the FIFO is.
- * It doesn't work at all the time, more's the pity.
- */
-static int size_fifo(struct uart_8250_port *up)
-{
- unsigned char old_fcr, old_mcr, old_lcr;
- unsigned short old_dl;
- int count;
-
- old_lcr = serial_in(up, UART_LCR);
- serial_out(up, UART_LCR, 0);
- old_fcr = serial_in(up, UART_FCR);
- old_mcr = serial_in(up, UART_MCR);
- serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
- UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
- serial_out(up, UART_MCR, UART_MCR_LOOP);
- serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
- old_dl = serial_dl_read(up);
- serial_dl_write(up, 0x0001);
- serial_out(up, UART_LCR, 0x03);
- for (count = 0; count < 256; count++)
- serial_out(up, UART_TX, count);
- mdelay(20);/* FIXME - schedule_timeout */
- for (count = 0; (serial_in(up, UART_LSR) & UART_LSR_DR) &&
- (count < 256); count++)
- serial_in(up, UART_RX);
- serial_out(up, UART_FCR, old_fcr);
- serial_out(up, UART_MCR, old_mcr);
- serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
- serial_dl_write(up, old_dl);
- serial_out(up, UART_LCR, old_lcr);
-
- return count;
-}
-
-/*
- * Read UART ID using the divisor method - set DLL and DLM to zero
- * and the revision will be in DLL and device type in DLM. We
- * preserve the device state across this.
- */
-static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
-{
- unsigned char old_dll, old_dlm, old_lcr;
- unsigned int id;
-
- old_lcr = serial_in(p, UART_LCR);
- serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A);
-
- old_dll = serial_in(p, UART_DLL);
- old_dlm = serial_in(p, UART_DLM);
-
- serial_out(p, UART_DLL, 0);
- serial_out(p, UART_DLM, 0);
-
- id = serial_in(p, UART_DLL) | serial_in(p, UART_DLM) << 8;
-
- serial_out(p, UART_DLL, old_dll);
- serial_out(p, UART_DLM, old_dlm);
- serial_out(p, UART_LCR, old_lcr);
-
- return id;
-}
-
-/*
- * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's.
- * When this function is called we know it is at least a StarTech
- * 16650 V2, but it might be one of several StarTech UARTs, or one of
- * its clones. (We treat the broken original StarTech 16650 V1 as a
- * 16550, and why not? Startech doesn't seem to even acknowledge its
- * existence.)
- *
- * What evil have men's minds wrought...
- */
-static void autoconfig_has_efr(struct uart_8250_port *up)
-{
- unsigned int id1, id2, id3, rev;
-
- /*
- * Everything with an EFR has SLEEP
- */
- up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
-
- /*
- * First we check to see if it's an Oxford Semiconductor UART.
- *
- * If we have to do this here because some non-National
- * Semiconductor clone chips lock up if you try writing to the
- * LSR register (which serial_icr_read does)
- */
-
- /*
- * Check for Oxford Semiconductor 16C950.
- *
- * EFR [4] must be set else this test fails.
- *
- * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca)
- * claims that it's needed for 952 dual UART's (which are not
- * recommended for new designs).
- */
- up->acr = 0;
- serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_out(up, UART_EFR, UART_EFR_ECB);
- serial_out(up, UART_LCR, 0x00);
- id1 = serial_icr_read(up, UART_ID1);
- id2 = serial_icr_read(up, UART_ID2);
- id3 = serial_icr_read(up, UART_ID3);
- rev = serial_icr_read(up, UART_REV);
-
- DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev);
-
- if (id1 == 0x16 && id2 == 0xC9 &&
- (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) {
- up->port.type = PORT_16C950;
-
- /*
- * Enable work around for the Oxford Semiconductor 952 rev B
- * chip which causes it to seriously miscalculate baud rates
- * when DLL is 0.
- */
- if (id3 == 0x52 && rev == 0x01)
- up->bugs |= UART_BUG_QUOT;
- return;
- }
-
- /*
- * We check for a XR16C850 by setting DLL and DLM to 0, and then
- * reading back DLL and DLM. The chip type depends on the DLM
- * value read back:
- * 0x10 - XR16C850 and the DLL contains the chip revision.
- * 0x12 - XR16C2850.
- * 0x14 - XR16C854.
- */
- id1 = autoconfig_read_divisor_id(up);
- DEBUG_AUTOCONF("850id=%04x ", id1);
-
- id2 = id1 >> 8;
- if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) {
- up->port.type = PORT_16850;
- return;
- }
-
- /*
- * It wasn't an XR16C850.
- *
- * We distinguish between the '654 and the '650 by counting
- * how many bytes are in the FIFO. I'm using this for now,
- * since that's the technique that was sent to me in the
- * serial driver update, but I'm not convinced this works.
- * I've had problems doing this in the past. -TYT
- */
- if (size_fifo(up) == 64)
- up->port.type = PORT_16654;
- else
- up->port.type = PORT_16650V2;
-}
-
-/*
- * We detected a chip without a FIFO. Only two fall into
- * this category - the original 8250 and the 16450. The
- * 16450 has a scratch register (accessible with LCR=0)
- */
-static void autoconfig_8250(struct uart_8250_port *up)
-{
- unsigned char scratch, status1, status2;
-
- up->port.type = PORT_8250;
-
- scratch = serial_in(up, UART_SCR);
- serial_out(up, UART_SCR, 0xa5);
- status1 = serial_in(up, UART_SCR);
- serial_out(up, UART_SCR, 0x5a);
- status2 = serial_in(up, UART_SCR);
- serial_out(up, UART_SCR, scratch);
-
- if (status1 == 0xa5 && status2 == 0x5a)
- up->port.type = PORT_16450;
-}
-
-static int broken_efr(struct uart_8250_port *up)
-{
- /*
- * Exar ST16C2550 "A2" devices incorrectly detect as
- * having an EFR, and report an ID of 0x0201. See
- * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
- */
- if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
- return 1;
-
- return 0;
-}
-
-/*
- * We know that the chip has FIFOs. Does it have an EFR? The
- * EFR is located in the same register position as the IIR and
- * we know the top two bits of the IIR are currently set. The
- * EFR should contain zero. Try to read the EFR.
- */
-static void autoconfig_16550a(struct uart_8250_port *up)
-{
- unsigned char status1, status2;
- unsigned int iersave;
-
- up->port.type = PORT_16550A;
- up->capabilities |= UART_CAP_FIFO;
-
- /*
- * XR17V35x UARTs have an extra divisor register, DLD
- * that gets enabled with when DLAB is set which will
- * cause the device to incorrectly match and assign
- * port type to PORT_16650. The EFR for this UART is
- * found at offset 0x09. Instead check the Deice ID (DVID)
- * register for a 2, 4 or 8 port UART.
- */
- if (up->port.flags & UPF_EXAR_EFR) {
- status1 = serial_in(up, UART_EXAR_DVID);
- if (status1 == 0x82 || status1 == 0x84 || status1 == 0x88) {
- DEBUG_AUTOCONF("Exar XR17V35x ");
- up->port.type = PORT_XR17V35X;
- up->capabilities |= UART_CAP_AFE | UART_CAP_EFR |
- UART_CAP_SLEEP;
-
- return;
- }
-
- }
-
- /*
- * Check for presence of the EFR when DLAB is set.
- * Only ST16C650V1 UARTs pass this test.
- */
- serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
- if (serial_in(up, UART_EFR) == 0) {
- serial_out(up, UART_EFR, 0xA8);
- if (serial_in(up, UART_EFR) != 0) {
- DEBUG_AUTOCONF("EFRv1 ");
- up->port.type = PORT_16650;
- up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
- } else {
- serial_out(up, UART_LCR, 0);
- serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
- UART_FCR7_64BYTE);
- status1 = serial_in(up, UART_IIR) >> 5;
- serial_out(up, UART_FCR, 0);
- serial_out(up, UART_LCR, 0);
-
- if (status1 == 7)
- up->port.type = PORT_16550A_FSL64;
- else
- DEBUG_AUTOCONF("Motorola 8xxx DUART ");
- }
- serial_out(up, UART_EFR, 0);
- return;
- }
-
- /*
- * Maybe it requires 0xbf to be written to the LCR.
- * (other ST16C650V2 UARTs, TI16C752A, etc)
- */
- serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
- if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) {
- DEBUG_AUTOCONF("EFRv2 ");
- autoconfig_has_efr(up);
- return;
- }
-
- /*
- * Check for a National Semiconductor SuperIO chip.
- * Attempt to switch to bank 2, read the value of the LOOP bit
- * from EXCR1. Switch back to bank 0, change it in MCR. Then
- * switch back to bank 2, read it from EXCR1 again and check
- * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2
- */
- serial_out(up, UART_LCR, 0);
- status1 = serial_in(up, UART_MCR);
- serial_out(up, UART_LCR, 0xE0);
- status2 = serial_in(up, 0x02); /* EXCR1 */
-
- if (!((status2 ^ status1) & UART_MCR_LOOP)) {
- serial_out(up, UART_LCR, 0);
- serial_out(up, UART_MCR, status1 ^ UART_MCR_LOOP);
- serial_out(up, UART_LCR, 0xE0);
- status2 = serial_in(up, 0x02); /* EXCR1 */
- serial_out(up, UART_LCR, 0);
- serial_out(up, UART_MCR, status1);
-
- if ((status2 ^ status1) & UART_MCR_LOOP) {
- unsigned short quot;
-
- serial_out(up, UART_LCR, 0xE0);
-
- quot = serial_dl_read(up);
- quot <<= 3;
-
- if (ns16550a_goto_highspeed(up))
- serial_dl_write(up, quot);
-
- serial_out(up, UART_LCR, 0);
-
- up->port.uartclk = 921600*16;
- up->port.type = PORT_NS16550A;
- up->capabilities |= UART_NATSEMI;
- return;
- }
- }
-
- /*
- * No EFR. Try to detect a TI16750, which only sets bit 5 of
- * the IIR when 64 byte FIFO mode is enabled when DLAB is set.
- * Try setting it with and without DLAB set. Cheap clones
- * set bit 5 without DLAB set.
- */
- serial_out(up, UART_LCR, 0);
- serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
- status1 = serial_in(up, UART_IIR) >> 5;
- serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
- serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
- serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
- status2 = serial_in(up, UART_IIR) >> 5;
- serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
- serial_out(up, UART_LCR, 0);
-
- DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2);
-
- if (status1 == 6 && status2 == 7) {
- up->port.type = PORT_16750;
- up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP;
- return;
- }
-
- /*
- * Try writing and reading the UART_IER_UUE bit (b6).
- * If it works, this is probably one of the Xscale platform's
- * internal UARTs.
- * We're going to explicitly set the UUE bit to 0 before
- * trying to write and read a 1 just to make sure it's not
- * already a 1 and maybe locked there before we even start start.
- */
- iersave = serial_in(up, UART_IER);
- serial_out(up, UART_IER, iersave & ~UART_IER_UUE);
- if (!(serial_in(up, UART_IER) & UART_IER_UUE)) {
- /*
- * OK it's in a known zero state, try writing and reading
- * without disturbing the current state of the other bits.
- */
- serial_out(up, UART_IER, iersave | UART_IER_UUE);
- if (serial_in(up, UART_IER) & UART_IER_UUE) {
- /*
- * It's an Xscale.
- * We'll leave the UART_IER_UUE bit set to 1 (enabled).
- */
- DEBUG_AUTOCONF("Xscale ");
- up->port.type = PORT_XSCALE;
- up->capabilities |= UART_CAP_UUE | UART_CAP_RTOIE;
- return;
- }
- } else {
- /*
- * If we got here we couldn't force the IER_UUE bit to 0.
- * Log it and continue.
- */
- DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 ");
- }
- serial_out(up, UART_IER, iersave);
-
- /*
- * Exar uarts have EFR in a weird location
- */
- if (up->port.flags & UPF_EXAR_EFR) {
- DEBUG_AUTOCONF("Exar XR17D15x ");
- up->port.type = PORT_XR17D15X;
- up->capabilities |= UART_CAP_AFE | UART_CAP_EFR |
- UART_CAP_SLEEP;
-
- return;
- }
-
- /*
- * We distinguish between 16550A and U6 16550A by counting
- * how many bytes are in the FIFO.
- */
- if (up->port.type == PORT_16550A && size_fifo(up) == 64) {
- up->port.type = PORT_U6_16550A;
- up->capabilities |= UART_CAP_AFE;
- }
-}
-
-/*
- * This routine is called by rs_init() to initialize a specific serial
- * port. It determines what type of UART chip this serial port is
- * using: 8250, 16450, 16550, 16550A. The important question is
- * whether or not this UART is a 16550A or not, since this will
- * determine whether or not we can use its FIFO features or not.
- */
-static void autoconfig(struct uart_8250_port *up)
-{
- unsigned char status1, scratch, scratch2, scratch3;
- unsigned char save_lcr, save_mcr;
- struct uart_port *port = &up->port;
- unsigned long flags;
- unsigned int old_capabilities;
-
- if (!port->iobase && !port->mapbase && !port->membase)
- return;
-
- DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ",
- serial_index(port), port->iobase, port->membase);
-
- /*
- * We really do need global IRQs disabled here - we're going to
- * be frobbing the chips IRQ enable register to see if it exists.
- */
- spin_lock_irqsave(&port->lock, flags);
-
- up->capabilities = 0;
- up->bugs = 0;
-
- if (!(port->flags & UPF_BUGGY_UART)) {
- /*
- * Do a simple existence test first; if we fail this,
- * there's no point trying anything else.
- *
- * 0x80 is used as a nonsense port to prevent against
- * false positives due to ISA bus float. The
- * assumption is that 0x80 is a non-existent port;
- * which should be safe since include/asm/io.h also
- * makes this assumption.
- *
- * Note: this is safe as long as MCR bit 4 is clear
- * and the device is in "PC" mode.
- */
- scratch = serial_in(up, UART_IER);
- serial_out(up, UART_IER, 0);
-#ifdef __i386__
- outb(0xff, 0x080);
-#endif
- /*
- * Mask out IER[7:4] bits for test as some UARTs (e.g. TL
- * 16C754B) allow only to modify them if an EFR bit is set.
- */
- scratch2 = serial_in(up, UART_IER) & 0x0f;
- serial_out(up, UART_IER, 0x0F);
-#ifdef __i386__
- outb(0, 0x080);
-#endif
- scratch3 = serial_in(up, UART_IER) & 0x0f;
- serial_out(up, UART_IER, scratch);
- if (scratch2 != 0 || scratch3 != 0x0F) {
- /*
- * We failed; there's nothing here
- */
- spin_unlock_irqrestore(&port->lock, flags);
- DEBUG_AUTOCONF("IER test failed (%02x, %02x) ",
- scratch2, scratch3);
- goto out;
- }
- }
-
- save_mcr = serial_in(up, UART_MCR);
- save_lcr = serial_in(up, UART_LCR);
-
- /*
- * Check to see if a UART is really there. Certain broken
- * internal modems based on the Rockwell chipset fail this
- * test, because they apparently don't implement the loopback
- * test mode. So this test is skipped on the COM 1 through
- * COM 4 ports. This *should* be safe, since no board
- * manufacturer would be stupid enough to design a board
- * that conflicts with COM 1-4 --- we hope!
- */
- if (!(port->flags & UPF_SKIP_TEST)) {
- serial_out(up, UART_MCR, UART_MCR_LOOP | 0x0A);
- status1 = serial_in(up, UART_MSR) & 0xF0;
- serial_out(up, UART_MCR, save_mcr);
- if (status1 != 0x90) {
- spin_unlock_irqrestore(&port->lock, flags);
- DEBUG_AUTOCONF("LOOP test failed (%02x) ",
- status1);
- goto out;
- }
- }
-
- /*
- * We're pretty sure there's a port here. Lets find out what
- * type of port it is. The IIR top two bits allows us to find
- * out if it's 8250 or 16450, 16550, 16550A or later. This
- * determines what we test for next.
- *
- * We also initialise the EFR (if any) to zero for later. The
- * EFR occupies the same register location as the FCR and IIR.
- */
- serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_out(up, UART_EFR, 0);
- serial_out(up, UART_LCR, 0);
-
- serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
- scratch = serial_in(up, UART_IIR) >> 6;
-
- switch (scratch) {
- case 0:
- autoconfig_8250(up);
- break;
- case 1:
- port->type = PORT_UNKNOWN;
- break;
- case 2:
- port->type = PORT_16550;
- break;
- case 3:
- autoconfig_16550a(up);
- break;
- }
-
-#ifdef CONFIG_SERIAL_8250_RSA
- /*
- * Only probe for RSA ports if we got the region.
- */
- if (port->type == PORT_16550A && up->probe & UART_PROBE_RSA &&
- __enable_rsa(up))
- port->type = PORT_RSA;
-#endif
-
- serial_out(up, UART_LCR, save_lcr);
-
- port->fifosize = uart_config[up->port.type].fifo_size;
- old_capabilities = up->capabilities;
- up->capabilities = uart_config[port->type].flags;
- up->tx_loadsz = uart_config[port->type].tx_loadsz;
-
- if (port->type == PORT_UNKNOWN)
- goto out_lock;
-
- /*
- * Reset the UART.
- */
-#ifdef CONFIG_SERIAL_8250_RSA
- if (port->type == PORT_RSA)
- serial_out(up, UART_RSA_FRR, 0);
-#endif
- serial_out(up, UART_MCR, save_mcr);
- serial8250_clear_fifos(up);
- serial_in(up, UART_RX);
- if (up->capabilities & UART_CAP_UUE)
- serial_out(up, UART_IER, UART_IER_UUE);
- else
- serial_out(up, UART_IER, 0);
-
-out_lock:
- spin_unlock_irqrestore(&port->lock, flags);
- if (up->capabilities != old_capabilities) {
- printk(KERN_WARNING
- "ttyS%d: detected caps %08x should be %08x\n",
- serial_index(port), old_capabilities,
- up->capabilities);
- }
-out:
- DEBUG_AUTOCONF("iir=%d ", scratch);
- DEBUG_AUTOCONF("type=%s\n", uart_config[port->type].name);
-}
-
-static void autoconfig_irq(struct uart_8250_port *up)
-{
- struct uart_port *port = &up->port;
- unsigned char save_mcr, save_ier;
- unsigned char save_ICP = 0;
- unsigned int ICP = 0;
- unsigned long irqs;
- int irq;
-
- if (port->flags & UPF_FOURPORT) {
- ICP = (port->iobase & 0xfe0) | 0x1f;
- save_ICP = inb_p(ICP);
- outb_p(0x80, ICP);
- inb_p(ICP);
- }
-
- /* forget possible initially masked and pending IRQ */
- probe_irq_off(probe_irq_on());
- save_mcr = serial_in(up, UART_MCR);
- save_ier = serial_in(up, UART_IER);
- serial_out(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2);
-
- irqs = probe_irq_on();
- serial_out(up, UART_MCR, 0);
- udelay(10);
- if (port->flags & UPF_FOURPORT) {
- serial_out(up, UART_MCR,
- UART_MCR_DTR | UART_MCR_RTS);
- } else {
- serial_out(up, UART_MCR,
- UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2);
- }
- serial_out(up, UART_IER, 0x0f); /* enable all intrs */
- serial_in(up, UART_LSR);
- serial_in(up, UART_RX);
- serial_in(up, UART_IIR);
- serial_in(up, UART_MSR);
- serial_out(up, UART_TX, 0xFF);
- udelay(20);
- irq = probe_irq_off(irqs);
-
- serial_out(up, UART_MCR, save_mcr);
- serial_out(up, UART_IER, save_ier);
-
- if (port->flags & UPF_FOURPORT)
- outb_p(save_ICP, ICP);
-
- port->irq = (irq > 0) ? irq : 0;
-}
-
-static inline void __stop_tx(struct uart_8250_port *p)
-{
- if (p->ier & UART_IER_THRI) {
- p->ier &= ~UART_IER_THRI;
- serial_out(p, UART_IER, p->ier);
- serial8250_rpm_put_tx(p);
- }
-}
-
-static void serial8250_stop_tx(struct uart_port *port)
-{
- struct uart_8250_port *up = up_to_u8250p(port);
-
- serial8250_rpm_get(up);
- __stop_tx(up);
-
- /*
- * We really want to stop the transmitter from sending.
- */
- if (port->type == PORT_16C950) {
- up->acr |= UART_ACR_TXDIS;
- serial_icr_write(up, UART_ACR, up->acr);
- }
- serial8250_rpm_put(up);
-}
-
-static void serial8250_start_tx(struct uart_port *port)
-{
- struct uart_8250_port *up = up_to_u8250p(port);
-
- serial8250_rpm_get_tx(up);
-
- if (up->dma && !up->dma->tx_dma(up))
- return;
-
- if (!(up->ier & UART_IER_THRI)) {
- up->ier |= UART_IER_THRI;
- serial_port_out(port, UART_IER, up->ier);
-
- if (up->bugs & UART_BUG_TXEN) {
- unsigned char lsr;
- lsr = serial_in(up, UART_LSR);
- up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
- if (lsr & UART_LSR_THRE)
- serial8250_tx_chars(up);
- }
- }
-
- /*
- * Re-enable the transmitter if we disabled it.
- */
- if (port->type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
- up->acr &= ~UART_ACR_TXDIS;
- serial_icr_write(up, UART_ACR, up->acr);
- }
-}
-
-static void serial8250_throttle(struct uart_port *port)
-{
- port->throttle(port);
-}
-
-static void serial8250_unthrottle(struct uart_port *port)
-{
- port->unthrottle(port);
-}
-
-static void serial8250_stop_rx(struct uart_port *port)
-{
- struct uart_8250_port *up = up_to_u8250p(port);
-
- serial8250_rpm_get(up);
-
- up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
- up->port.read_status_mask &= ~UART_LSR_DR;
- serial_port_out(port, UART_IER, up->ier);
-
- serial8250_rpm_put(up);
-}
-
-static void serial8250_disable_ms(struct uart_port *port)
-{
- struct uart_8250_port *up =
- container_of(port, struct uart_8250_port, port);
-
- /* no MSR capabilities */
- if (up->bugs & UART_BUG_NOMSR)
- return;
-
- up->ier &= ~UART_IER_MSI;
- serial_port_out(port, UART_IER, up->ier);
-}
-
-static void serial8250_enable_ms(struct uart_port *port)
-{
- struct uart_8250_port *up = up_to_u8250p(port);
-
- /* no MSR capabilities */
- if (up->bugs & UART_BUG_NOMSR)
- return;
-
- up->ier |= UART_IER_MSI;
-
- serial8250_rpm_get(up);
- serial_port_out(port, UART_IER, up->ier);
- serial8250_rpm_put(up);
-}
-
-/*
- * serial8250_rx_chars: processes according to the passed in LSR
- * value, and returns the remaining LSR bits not handled
- * by this Rx routine.
- */
-unsigned char
-serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr)
-{
- struct uart_port *port = &up->port;
- unsigned char ch;
- int max_count = 256;
- char flag;
-
- do {
- if (likely(lsr & UART_LSR_DR))
- ch = serial_in(up, UART_RX);
- else
- /*
- * Intel 82571 has a Serial Over Lan device that will
- * set UART_LSR_BI without setting UART_LSR_DR when
- * it receives a break. To avoid reading from the
- * receive buffer without UART_LSR_DR bit set, we
- * just force the read character to be 0
- */
- ch = 0;
-
- flag = TTY_NORMAL;
- port->icount.rx++;
-
- lsr |= up->lsr_saved_flags;
- up->lsr_saved_flags = 0;
-
- if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
- if (lsr & UART_LSR_BI) {
- lsr &= ~(UART_LSR_FE | UART_LSR_PE);
- port->icount.brk++;
- /*
- * We do the SysRQ and SAK checking
- * here because otherwise the break
- * may get masked by ignore_status_mask
- * or read_status_mask.
- */
- if (uart_handle_break(port))
- goto ignore_char;
- } else if (lsr & UART_LSR_PE)
- port->icount.parity++;
- else if (lsr & UART_LSR_FE)
- port->icount.frame++;
- if (lsr & UART_LSR_OE)
- port->icount.overrun++;
-
- /*
- * Mask off conditions which should be ignored.
- */
- lsr &= port->read_status_mask;
-
- if (lsr & UART_LSR_BI) {
- DEBUG_INTR("handling break....");
- flag = TTY_BREAK;
- } else if (lsr & UART_LSR_PE)
- flag = TTY_PARITY;
- else if (lsr & UART_LSR_FE)
- flag = TTY_FRAME;
- }
- if (uart_handle_sysrq_char(port, ch))
- goto ignore_char;
-
- uart_insert_char(port, lsr, UART_LSR_OE, ch, flag);
-
-ignore_char:
- lsr = serial_in(up, UART_LSR);
- } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (--max_count > 0));
- spin_unlock(&port->lock);
- tty_flip_buffer_push(&port->state->port);
- spin_lock(&port->lock);
- return lsr;
-}
-EXPORT_SYMBOL_GPL(serial8250_rx_chars);
-
-void serial8250_tx_chars(struct uart_8250_port *up)
-{
- struct uart_port *port = &up->port;
- struct circ_buf *xmit = &port->state->xmit;
- int count;
-
- if (port->x_char) {
- serial_out(up, UART_TX, port->x_char);
- port->icount.tx++;
- port->x_char = 0;
- return;
- }
- if (uart_tx_stopped(port)) {
- serial8250_stop_tx(port);
- return;
- }
- if (uart_circ_empty(xmit)) {
- __stop_tx(up);
- return;
- }
-
- count = up->tx_loadsz;
- do {
- serial_out(up, UART_TX, xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- if (uart_circ_empty(xmit))
- break;
- if (up->capabilities & UART_CAP_HFIFO) {
- if ((serial_port_in(port, UART_LSR) & BOTH_EMPTY) !=
- BOTH_EMPTY)
- break;
- }
- } while (--count > 0);
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- DEBUG_INTR("THRE...");
-
- /*
- * With RPM enabled, we have to wait until the FIFO is empty before the
- * HW can go idle. So we get here once again with empty FIFO and disable
- * the interrupt and RPM in __stop_tx()
- */
- if (uart_circ_empty(xmit) && !(up->capabilities & UART_CAP_RPM))
- __stop_tx(up);
-}
-EXPORT_SYMBOL_GPL(serial8250_tx_chars);
-
-/* Caller holds uart port lock */
-unsigned int serial8250_modem_status(struct uart_8250_port *up)
-{
- struct uart_port *port = &up->port;
- unsigned int status = serial_in(up, UART_MSR);
-
- status |= up->msr_saved_flags;
- up->msr_saved_flags = 0;
- if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
- port->state != NULL) {
- if (status & UART_MSR_TERI)
- port->icount.rng++;
- if (status & UART_MSR_DDSR)
- port->icount.dsr++;
- if (status & UART_MSR_DDCD)
- uart_handle_dcd_change(port, status & UART_MSR_DCD);
- if (status & UART_MSR_DCTS)
- uart_handle_cts_change(port, status & UART_MSR_CTS);
-
- wake_up_interruptible(&port->state->port.delta_msr_wait);
- }
-
- return status;
-}
-EXPORT_SYMBOL_GPL(serial8250_modem_status);
-
-/*
- * This handles the interrupt from one port.
- */
-int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
-{
- unsigned char status;
- unsigned long flags;
- struct uart_8250_port *up = up_to_u8250p(port);
- int dma_err = 0;
-
- if (iir & UART_IIR_NO_INT)
- return 0;
-
- spin_lock_irqsave(&port->lock, flags);
-
- status = serial_port_in(port, UART_LSR);
-
- DEBUG_INTR("status = %x...", status);
-
- if (status & (UART_LSR_DR | UART_LSR_BI)) {
- if (up->dma)
- dma_err = up->dma->rx_dma(up, iir);
-
- if (!up->dma || dma_err)
- status = serial8250_rx_chars(up, status);
- }
- serial8250_modem_status(up);
- if ((!up->dma || (up->dma && up->dma->tx_err)) &&
- (status & UART_LSR_THRE))
- serial8250_tx_chars(up);
-
- spin_unlock_irqrestore(&port->lock, flags);
- return 1;
-}
-EXPORT_SYMBOL_GPL(serial8250_handle_irq);
-
-static int serial8250_default_handle_irq(struct uart_port *port)
-{
- struct uart_8250_port *up = up_to_u8250p(port);
- unsigned int iir;
- int ret;
-
- serial8250_rpm_get(up);
-
- iir = serial_port_in(port, UART_IIR);
- ret = serial8250_handle_irq(port, iir);
-
- serial8250_rpm_put(up);
- return ret;
-}
-
-/*
- * These Exar UARTs have an extra interrupt indicator that could
- * fire for a few unimplemented interrupts. One of which is a
- * wakeup event when coming out of sleep. Put this here just
- * to be on the safe side that these interrupts don't go unhandled.
- */
-static int exar_handle_irq(struct uart_port *port)
-{
- unsigned char int0, int1, int2, int3;
- unsigned int iir = serial_port_in(port, UART_IIR);
- int ret;
-
- ret = serial8250_handle_irq(port, iir);
-
- if ((port->type == PORT_XR17V35X) ||
- (port->type == PORT_XR17D15X)) {
- int0 = serial_port_in(port, 0x80);
- int1 = serial_port_in(port, 0x81);
- int2 = serial_port_in(port, 0x82);
- int3 = serial_port_in(port, 0x83);
- }
-
- return ret;
-}
-
-/*
* This is the serial driver's interrupt routine.
*
* Arjan thinks the old way was overly complex, so it got simplified.
@@ -1964,875 +368,6 @@ static void univ8250_release_irq(struct uart_8250_port *up)
serial_unlink_irq_chain(up);
}
-static unsigned int serial8250_tx_empty(struct uart_port *port)
-{
- struct uart_8250_port *up = up_to_u8250p(port);
- unsigned long flags;
- unsigned int lsr;
-
- serial8250_rpm_get(up);
-
- spin_lock_irqsave(&port->lock, flags);
- lsr = serial_port_in(port, UART_LSR);
- up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
- spin_unlock_irqrestore(&port->lock, flags);
-
- serial8250_rpm_put(up);
-
- return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0;
-}
-
-static unsigned int serial8250_get_mctrl(struct uart_port *port)
-{
- struct uart_8250_port *up = up_to_u8250p(port);
- unsigned int status;
- unsigned int ret;
-
- serial8250_rpm_get(up);
- status = serial8250_modem_status(up);
- serial8250_rpm_put(up);
-
- ret = 0;
- if (status & UART_MSR_DCD)
- ret |= TIOCM_CAR;
- if (status & UART_MSR_RI)
- ret |= TIOCM_RNG;
- if (status & UART_MSR_DSR)
- ret |= TIOCM_DSR;
- if (status & UART_MSR_CTS)
- ret |= TIOCM_CTS;
- return ret;
-}
-
-void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
- struct uart_8250_port *up = up_to_u8250p(port);
- unsigned char mcr = 0;
-
- if (mctrl & TIOCM_RTS)
- mcr |= UART_MCR_RTS;
- if (mctrl & TIOCM_DTR)
- mcr |= UART_MCR_DTR;
- if (mctrl & TIOCM_OUT1)
- mcr |= UART_MCR_OUT1;
- if (mctrl & TIOCM_OUT2)
- mcr |= UART_MCR_OUT2;
- if (mctrl & TIOCM_LOOP)
- mcr |= UART_MCR_LOOP;
-
- mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr;
-
- serial_port_out(port, UART_MCR, mcr);
-}
-EXPORT_SYMBOL_GPL(serial8250_do_set_mctrl);
-
-static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
- if (port->set_mctrl)
- return port->set_mctrl(port, mctrl);
- return serial8250_do_set_mctrl(port, mctrl);
-}
-
-static void serial8250_break_ctl(struct uart_port *port, int break_state)
-{
- struct uart_8250_port *up = up_to_u8250p(port);
- unsigned long flags;
-
- serial8250_rpm_get(up);
- spin_lock_irqsave(&port->lock, flags);
- if (break_state == -1)
- up->lcr |= UART_LCR_SBC;
- else
- up->lcr &= ~UART_LCR_SBC;
- serial_port_out(port, UART_LCR, up->lcr);
- spin_unlock_irqrestore(&port->lock, flags);
- serial8250_rpm_put(up);
-}
-
-/*
- * Wait for transmitter & holding register to empty
- */
-static void wait_for_xmitr(struct uart_8250_port *up, int bits)
-{
- unsigned int status, tmout = 10000;
-
- /* Wait up to 10ms for the character(s) to be sent. */
- for (;;) {
- status = serial_in(up, UART_LSR);
-
- up->lsr_saved_flags |= status & LSR_SAVE_FLAGS;
-
- if ((status & bits) == bits)
- break;
- if (--tmout == 0)
- break;
- udelay(1);
- }
-
- /* Wait up to 1s for flow control if necessary */
- if (up->port.flags & UPF_CONS_FLOW) {
- unsigned int tmout;
- for (tmout = 1000000; tmout; tmout--) {
- unsigned int msr = serial_in(up, UART_MSR);
- up->msr_saved_flags |= msr & MSR_SAVE_FLAGS;
- if (msr & UART_MSR_CTS)
- break;
- udelay(1);
- touch_nmi_watchdog();
- }
- }
-}
-
-#ifdef CONFIG_CONSOLE_POLL
-/*
- * Console polling routines for writing and reading from the uart while
- * in an interrupt or debug context.
- */
-
-static int serial8250_get_poll_char(struct uart_port *port)
-{
- struct uart_8250_port *up = up_to_u8250p(port);
- unsigned char lsr;
- int status;
-
- serial8250_rpm_get(up);
-
- lsr = serial_port_in(port, UART_LSR);
-
- if (!(lsr & UART_LSR_DR)) {
- status = NO_POLL_CHAR;
- goto out;
- }
-
- status = serial_port_in(port, UART_RX);
-out:
- serial8250_rpm_put(up);
- return status;
-}
-
-
-static void serial8250_put_poll_char(struct uart_port *port,
- unsigned char c)
-{
- unsigned int ier;
- struct uart_8250_port *up = up_to_u8250p(port);
-
- serial8250_rpm_get(up);
- /*
- * First save the IER then disable the interrupts
- */
- ier = serial_port_in(port, UART_IER);
- if (up->capabilities & UART_CAP_UUE)
- serial_port_out(port, UART_IER, UART_IER_UUE);
- else
- serial_port_out(port, UART_IER, 0);
-
- wait_for_xmitr(up, BOTH_EMPTY);
- /*
- * Send the character out.
- */
- serial_port_out(port, UART_TX, c);
-
- /*
- * Finally, wait for transmitter to become empty
- * and restore the IER
- */
- wait_for_xmitr(up, BOTH_EMPTY);
- serial_port_out(port, UART_IER, ier);
- serial8250_rpm_put(up);
-}
-
-#endif /* CONFIG_CONSOLE_POLL */
-
-int serial8250_do_startup(struct uart_port *port)
-{
- struct uart_8250_port *up = up_to_u8250p(port);
- unsigned long flags;
- unsigned char lsr, iir;
- int retval;
-
- if (port->type == PORT_8250_CIR)
- return -ENODEV;
-
- if (!port->fifosize)
- port->fifosize = uart_config[port->type].fifo_size;
- if (!up->tx_loadsz)
- up->tx_loadsz = uart_config[port->type].tx_loadsz;
- if (!up->capabilities)
- up->capabilities = uart_config[port->type].flags;
- up->mcr = 0;
-
- if (port->iotype != up->cur_iotype)
- set_io_from_upio(port);
-
- serial8250_rpm_get(up);
- if (port->type == PORT_16C950) {
- /* Wake up and initialize UART */
- up->acr = 0;
- serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_port_out(port, UART_EFR, UART_EFR_ECB);
- serial_port_out(port, UART_IER, 0);
- serial_port_out(port, UART_LCR, 0);
- serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
- serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_port_out(port, UART_EFR, UART_EFR_ECB);
- serial_port_out(port, UART_LCR, 0);
- }
-
-#ifdef CONFIG_SERIAL_8250_RSA
- /*
- * If this is an RSA port, see if we can kick it up to the
- * higher speed clock.
- */
- enable_rsa(up);
-#endif
- /*
- * Clear the FIFO buffers and disable them.
- * (they will be reenabled in set_termios())
- */
- serial8250_clear_fifos(up);
-
- /*
- * Clear the interrupt registers.
- */
- serial_port_in(port, UART_LSR);
- serial_port_in(port, UART_RX);
- serial_port_in(port, UART_IIR);
- serial_port_in(port, UART_MSR);
-
- /*
- * At this point, there's no way the LSR could still be 0xff;
- * if it is, then bail out, because there's likely no UART
- * here.
- */
- if (!(port->flags & UPF_BUGGY_UART) &&
- (serial_port_in(port, UART_LSR) == 0xff)) {
- printk_ratelimited(KERN_INFO "ttyS%d: LSR safety check engaged!\n",
- serial_index(port));
- retval = -ENODEV;
- goto out;
- }
-
- /*
- * For a XR16C850, we need to set the trigger levels
- */
- if (port->type == PORT_16850) {
- unsigned char fctr;
-
- serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
-
- fctr = serial_in(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX);
- serial_port_out(port, UART_FCTR,
- fctr | UART_FCTR_TRGD | UART_FCTR_RX);
- serial_port_out(port, UART_TRG, UART_TRG_96);
- serial_port_out(port, UART_FCTR,
- fctr | UART_FCTR_TRGD | UART_FCTR_TX);
- serial_port_out(port, UART_TRG, UART_TRG_96);
-
- serial_port_out(port, UART_LCR, 0);
- }
-
- if (port->irq) {
- unsigned char iir1;
- /*
- * Test for UARTs that do not reassert THRE when the
- * transmitter is idle and the interrupt has already
- * been cleared. Real 16550s should always reassert
- * this interrupt whenever the transmitter is idle and
- * the interrupt is enabled. Delays are necessary to
- * allow register changes to become visible.
- */
- spin_lock_irqsave(&port->lock, flags);
- if (up->port.irqflags & IRQF_SHARED)
- disable_irq_nosync(port->irq);
-
- wait_for_xmitr(up, UART_LSR_THRE);
- serial_port_out_sync(port, UART_IER, UART_IER_THRI);
- udelay(1); /* allow THRE to set */
- iir1 = serial_port_in(port, UART_IIR);
- serial_port_out(port, UART_IER, 0);
- serial_port_out_sync(port, UART_IER, UART_IER_THRI);
- udelay(1); /* allow a working UART time to re-assert THRE */
- iir = serial_port_in(port, UART_IIR);
- serial_port_out(port, UART_IER, 0);
-
- if (port->irqflags & IRQF_SHARED)
- enable_irq(port->irq);
- spin_unlock_irqrestore(&port->lock, flags);
-
- /*
- * If the interrupt is not reasserted, or we otherwise
- * don't trust the iir, setup a timer to kick the UART
- * on a regular basis.
- */
- if ((!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) ||
- up->port.flags & UPF_BUG_THRE) {
- up->bugs |= UART_BUG_THRE;
- }
- }
-
- retval = up->ops->setup_irq(up);
- if (retval)
- goto out;
-
- /*
- * Now, initialize the UART
- */
- serial_port_out(port, UART_LCR, UART_LCR_WLEN8);
-
- spin_lock_irqsave(&port->lock, flags);
- if (up->port.flags & UPF_FOURPORT) {
- if (!up->port.irq)
- up->port.mctrl |= TIOCM_OUT1;
- } else
- /*
- * Most PC uarts need OUT2 raised to enable interrupts.
- */
- if (port->irq)
- up->port.mctrl |= TIOCM_OUT2;
-
- serial8250_set_mctrl(port, port->mctrl);
-
- /* Serial over Lan (SoL) hack:
- Intel 8257x Gigabit ethernet chips have a
- 16550 emulation, to be used for Serial Over Lan.
- Those chips take a longer time than a normal
- serial device to signalize that a transmission
- data was queued. Due to that, the above test generally
- fails. One solution would be to delay the reading of
- iir. However, this is not reliable, since the timeout
- is variable. So, let's just don't test if we receive
- TX irq. This way, we'll never enable UART_BUG_TXEN.
- */
- if (up->port.flags & UPF_NO_TXEN_TEST)
- goto dont_test_tx_en;
-
- /*
- * Do a quick test to see if we receive an
- * interrupt when we enable the TX irq.
- */
- serial_port_out(port, UART_IER, UART_IER_THRI);
- lsr = serial_port_in(port, UART_LSR);
- iir = serial_port_in(port, UART_IIR);
- serial_port_out(port, UART_IER, 0);
-
- if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) {
- if (!(up->bugs & UART_BUG_TXEN)) {
- up->bugs |= UART_BUG_TXEN;
- pr_debug("ttyS%d - enabling bad tx status workarounds\n",
- serial_index(port));
- }
- } else {
- up->bugs &= ~UART_BUG_TXEN;
- }
-
-dont_test_tx_en:
- spin_unlock_irqrestore(&port->lock, flags);
-
- /*
- * Clear the interrupt registers again for luck, and clear the
- * saved flags to avoid getting false values from polling
- * routines or the previous session.
- */
- serial_port_in(port, UART_LSR);
- serial_port_in(port, UART_RX);
- serial_port_in(port, UART_IIR);
- serial_port_in(port, UART_MSR);
- up->lsr_saved_flags = 0;
- up->msr_saved_flags = 0;
-
- /*
- * Request DMA channels for both RX and TX.
- */
- if (up->dma) {
- retval = serial8250_request_dma(up);
- if (retval) {
- pr_warn_ratelimited("ttyS%d - failed to request DMA\n",
- serial_index(port));
- up->dma = NULL;
- }
- }
-
- /*
- * Finally, enable interrupts. Note: Modem status interrupts
- * are set via set_termios(), which will be occurring imminently
- * anyway, so we don't enable them here.
- */
- up->ier = UART_IER_RLSI | UART_IER_RDI;
- serial_port_out(port, UART_IER, up->ier);
-
- if (port->flags & UPF_FOURPORT) {
- unsigned int icp;
- /*
- * Enable interrupts on the AST Fourport board
- */
- icp = (port->iobase & 0xfe0) | 0x01f;
- outb_p(0x80, icp);
- inb_p(icp);
- }
- retval = 0;
-out:
- serial8250_rpm_put(up);
- return retval;
-}
-EXPORT_SYMBOL_GPL(serial8250_do_startup);
-
-static int serial8250_startup(struct uart_port *port)
-{
- if (port->startup)
- return port->startup(port);
- return serial8250_do_startup(port);
-}
-
-void serial8250_do_shutdown(struct uart_port *port)
-{
- struct uart_8250_port *up = up_to_u8250p(port);
- unsigned long flags;
-
- serial8250_rpm_get(up);
- /*
- * Disable interrupts from this port
- */
- up->ier = 0;
- serial_port_out(port, UART_IER, 0);
-
- if (up->dma)
- serial8250_release_dma(up);
-
- spin_lock_irqsave(&port->lock, flags);
- if (port->flags & UPF_FOURPORT) {
- /* reset interrupts on the AST Fourport board */
- inb((port->iobase & 0xfe0) | 0x1f);
- port->mctrl |= TIOCM_OUT1;
- } else
- port->mctrl &= ~TIOCM_OUT2;
-
- serial8250_set_mctrl(port, port->mctrl);
- spin_unlock_irqrestore(&port->lock, flags);
-
- /*
- * Disable break condition and FIFOs
- */
- serial_port_out(port, UART_LCR,
- serial_port_in(port, UART_LCR) & ~UART_LCR_SBC);
- serial8250_clear_fifos(up);
-
-#ifdef CONFIG_SERIAL_8250_RSA
- /*
- * Reset the RSA board back to 115kbps compat mode.
- */
- disable_rsa(up);
-#endif
-
- /*
- * Read data port to reset things, and then unlink from
- * the IRQ chain.
- */
- serial_port_in(port, UART_RX);
- serial8250_rpm_put(up);
-
- up->ops->release_irq(up);
-}
-EXPORT_SYMBOL_GPL(serial8250_do_shutdown);
-
-static void serial8250_shutdown(struct uart_port *port)
-{
- if (port->shutdown)
- port->shutdown(port);
- else
- serial8250_do_shutdown(port);
-}
-
-/*
- * XR17V35x UARTs have an extra fractional divisor register (DLD)
- * Calculate divisor with extra 4-bit fractional portion
- */
-static unsigned int xr17v35x_get_divisor(struct uart_8250_port *up,
- unsigned int baud,
- unsigned int *frac)
-{
- struct uart_port *port = &up->port;
- unsigned int quot_16;
-
- quot_16 = DIV_ROUND_CLOSEST(port->uartclk, baud);
- *frac = quot_16 & 0x0f;
-
- return quot_16 >> 4;
-}
-
-static unsigned int serial8250_get_divisor(struct uart_8250_port *up,
- unsigned int baud,
- unsigned int *frac)
-{
- struct uart_port *port = &up->port;
- unsigned int quot;
-
- /*
- * Handle magic divisors for baud rates above baud_base on
- * SMSC SuperIO chips.
- *
- */
- if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
- baud == (port->uartclk/4))
- quot = 0x8001;
- else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
- baud == (port->uartclk/8))
- quot = 0x8002;
- else if (up->port.type == PORT_XR17V35X)
- quot = xr17v35x_get_divisor(up, baud, frac);
- else
- quot = uart_get_divisor(port, baud);
-
- /*
- * Oxford Semi 952 rev B workaround
- */
- if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0)
- quot++;
-
- return quot;
-}
-
-static unsigned char serial8250_compute_lcr(struct uart_8250_port *up,
- tcflag_t c_cflag)
-{
- unsigned char cval;
-
- switch (c_cflag & CSIZE) {
- case CS5:
- cval = UART_LCR_WLEN5;
- break;
- case CS6:
- cval = UART_LCR_WLEN6;
- break;
- case CS7:
- cval = UART_LCR_WLEN7;
- break;
- default:
- case CS8:
- cval = UART_LCR_WLEN8;
- break;
- }
-
- if (c_cflag & CSTOPB)
- cval |= UART_LCR_STOP;
- if (c_cflag & PARENB) {
- cval |= UART_LCR_PARITY;
- if (up->bugs & UART_BUG_PARITY)
- up->fifo_bug = true;
- }
- if (!(c_cflag & PARODD))
- cval |= UART_LCR_EPAR;
-#ifdef CMSPAR
- if (c_cflag & CMSPAR)
- cval |= UART_LCR_SPAR;
-#endif
-
- return cval;
-}
-
-static void serial8250_set_divisor(struct uart_port *port, unsigned int baud,
- unsigned int quot, unsigned int quot_frac)
-{
- struct uart_8250_port *up = up_to_u8250p(port);
-
- /* Workaround to enable 115200 baud on OMAP1510 internal ports */
- if (is_omap1510_8250(up)) {
- if (baud == 115200) {
- quot = 1;
- serial_port_out(port, UART_OMAP_OSC_12M_SEL, 1);
- } else
- serial_port_out(port, UART_OMAP_OSC_12M_SEL, 0);
- }
-
- /*
- * For NatSemi, switch to bank 2 not bank 1, to avoid resetting EXCR2,
- * otherwise just set DLAB
- */
- if (up->capabilities & UART_NATSEMI)
- serial_port_out(port, UART_LCR, 0xe0);
- else
- serial_port_out(port, UART_LCR, up->lcr | UART_LCR_DLAB);
-
- serial_dl_write(up, quot);
-
- /* XR17V35x UARTs have an extra fractional divisor register (DLD) */
- if (up->port.type == PORT_XR17V35X)
- serial_port_out(port, 0x2, quot_frac);
-}
-
-void
-serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
-{
- struct uart_8250_port *up = up_to_u8250p(port);
- unsigned char cval;
- unsigned long flags;
- unsigned int baud, quot, frac = 0;
-
- cval = serial8250_compute_lcr(up, termios->c_cflag);
-
- /*
- * Ask the core to calculate the divisor for us.
- */
- baud = uart_get_baud_rate(port, termios, old,
- port->uartclk / 16 / 0xffff,
- port->uartclk / 16);
- quot = serial8250_get_divisor(up, baud, &frac);
-
- /*
- * Ok, we're now changing the port state. Do it with
- * interrupts disabled.
- */
- serial8250_rpm_get(up);
- spin_lock_irqsave(&port->lock, flags);
-
- up->lcr = cval; /* Save computed LCR */
-
- if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {
- /* NOTE: If fifo_bug is not set, a user can set RX_trigger. */
- if ((baud < 2400 && !up->dma) || up->fifo_bug) {
- up->fcr &= ~UART_FCR_TRIGGER_MASK;
- up->fcr |= UART_FCR_TRIGGER_1;
- }
- }
-
- /*
- * MCR-based auto flow control. When AFE is enabled, RTS will be
- * deasserted when the receive FIFO contains more characters than
- * the trigger, or the MCR RTS bit is cleared. In the case where
- * the remote UART is not using CTS auto flow control, we must
- * have sufficient FIFO entries for the latency of the remote
- * UART to respond. IOW, at least 32 bytes of FIFO.
- */
- if (up->capabilities & UART_CAP_AFE && port->fifosize >= 32) {
- up->mcr &= ~UART_MCR_AFE;
- if (termios->c_cflag & CRTSCTS)
- up->mcr |= UART_MCR_AFE;
- }
-
- /*
- * Update the per-port timeout.
- */
- uart_update_timeout(port, termios->c_cflag, baud);
-
- port->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
- if (termios->c_iflag & INPCK)
- port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
- if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
- port->read_status_mask |= UART_LSR_BI;
-
- /*
- * Characteres to ignore
- */
- port->ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
- if (termios->c_iflag & IGNBRK) {
- port->ignore_status_mask |= UART_LSR_BI;
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns too (for real raw support).
- */
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= UART_LSR_OE;
- }
-
- /*
- * ignore all characters if CREAD is not set
- */
- if ((termios->c_cflag & CREAD) == 0)
- port->ignore_status_mask |= UART_LSR_DR;
-
- /*
- * CTS flow control flag and modem status interrupts
- */
- up->ier &= ~UART_IER_MSI;
- if (!(up->bugs & UART_BUG_NOMSR) &&
- UART_ENABLE_MS(&up->port, termios->c_cflag))
- up->ier |= UART_IER_MSI;
- if (up->capabilities & UART_CAP_UUE)
- up->ier |= UART_IER_UUE;
- if (up->capabilities & UART_CAP_RTOIE)
- up->ier |= UART_IER_RTOIE;
-
- serial_port_out(port, UART_IER, up->ier);
-
- if (up->capabilities & UART_CAP_EFR) {
- unsigned char efr = 0;
- /*
- * TI16C752/Startech hardware flow control. FIXME:
- * - TI16C752 requires control thresholds to be set.
- * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled.
- */
- if (termios->c_cflag & CRTSCTS)
- efr |= UART_EFR_CTS;
-
- serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
- if (port->flags & UPF_EXAR_EFR)
- serial_port_out(port, UART_XR_EFR, efr);
- else
- serial_port_out(port, UART_EFR, efr);
- }
-
- serial8250_set_divisor(port, baud, quot, frac);
-
- /*
- * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
- * is written without DLAB set, this mode will be disabled.
- */
- if (port->type == PORT_16750)
- serial_port_out(port, UART_FCR, up->fcr);
-
- serial_port_out(port, UART_LCR, up->lcr); /* reset DLAB */
- if (port->type != PORT_16750) {
- /* emulated UARTs (Lucent Venus 167x) need two steps */
- if (up->fcr & UART_FCR_ENABLE_FIFO)
- serial_port_out(port, UART_FCR, UART_FCR_ENABLE_FIFO);
- serial_port_out(port, UART_FCR, up->fcr); /* set fcr */
- }
- serial8250_set_mctrl(port, port->mctrl);
- spin_unlock_irqrestore(&port->lock, flags);
- serial8250_rpm_put(up);
-
- /* Don't rewrite B0 */
- if (tty_termios_baud_rate(termios))
- tty_termios_encode_baud_rate(termios, baud, baud);
-}
-EXPORT_SYMBOL(serial8250_do_set_termios);
-
-static void
-serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
- struct ktermios *old)
-{
- if (port->set_termios)
- port->set_termios(port, termios, old);
- else
- serial8250_do_set_termios(port, termios, old);
-}
-
-static void
-serial8250_set_ldisc(struct uart_port *port, struct ktermios *termios)
-{
- if (termios->c_line == N_PPS) {
- port->flags |= UPF_HARDPPS_CD;
- spin_lock_irq(&port->lock);
- serial8250_enable_ms(port);
- spin_unlock_irq(&port->lock);
- } else {
- port->flags &= ~UPF_HARDPPS_CD;
- if (!UART_ENABLE_MS(port, termios->c_cflag)) {
- spin_lock_irq(&port->lock);
- serial8250_disable_ms(port);
- spin_unlock_irq(&port->lock);
- }
- }
-}
-
-
-void serial8250_do_pm(struct uart_port *port, unsigned int state,
- unsigned int oldstate)
-{
- struct uart_8250_port *p = up_to_u8250p(port);
-
- serial8250_set_sleep(p, state != 0);
-}
-EXPORT_SYMBOL(serial8250_do_pm);
-
-static void
-serial8250_pm(struct uart_port *port, unsigned int state,
- unsigned int oldstate)
-{
- if (port->pm)
- port->pm(port, state, oldstate);
- else
- serial8250_do_pm(port, state, oldstate);
-}
-
-static unsigned int serial8250_port_size(struct uart_8250_port *pt)
-{
- if (pt->port.mapsize)
- return pt->port.mapsize;
- if (pt->port.iotype == UPIO_AU) {
- if (pt->port.type == PORT_RT2880)
- return 0x100;
- return 0x1000;
- }
- if (is_omap1_8250(pt))
- return 0x16 << pt->port.regshift;
-
- return 8 << pt->port.regshift;
-}
-
-/*
- * Resource handling.
- */
-static int serial8250_request_std_resource(struct uart_8250_port *up)
-{
- unsigned int size = serial8250_port_size(up);
- struct uart_port *port = &up->port;
- int ret = 0;
-
- switch (port->iotype) {
- case UPIO_AU:
- case UPIO_TSI:
- case UPIO_MEM32:
- case UPIO_MEM32BE:
- case UPIO_MEM:
- if (!port->mapbase)
- break;
-
- if (!request_mem_region(port->mapbase, size, "serial")) {
- ret = -EBUSY;
- break;
- }
-
- if (port->flags & UPF_IOREMAP) {
- port->membase = ioremap_nocache(port->mapbase, size);
- if (!port->membase) {
- release_mem_region(port->mapbase, size);
- ret = -ENOMEM;
- }
- }
- break;
-
- case UPIO_HUB6:
- case UPIO_PORT:
- if (!request_region(port->iobase, size, "serial"))
- ret = -EBUSY;
- break;
- }
- return ret;
-}
-
-static void serial8250_release_std_resource(struct uart_8250_port *up)
-{
- unsigned int size = serial8250_port_size(up);
- struct uart_port *port = &up->port;
-
- switch (port->iotype) {
- case UPIO_AU:
- case UPIO_TSI:
- case UPIO_MEM32:
- case UPIO_MEM32BE:
- case UPIO_MEM:
- if (!port->mapbase)
- break;
-
- if (port->flags & UPF_IOREMAP) {
- iounmap(port->membase);
- port->membase = NULL;
- }
-
- release_mem_region(port->mapbase, size);
- break;
-
- case UPIO_HUB6:
- case UPIO_PORT:
- release_region(port->iobase, size);
- break;
- }
-}
-
#ifdef CONFIG_SERIAL_8250_RSA
static int serial8250_request_rsa_resource(struct uart_8250_port *up)
{
@@ -2870,259 +405,6 @@ static void serial8250_release_rsa_resource(struct uart_8250_port *up)
}
#endif
-static void serial8250_release_port(struct uart_port *port)
-{
- struct uart_8250_port *up = up_to_u8250p(port);
-
- serial8250_release_std_resource(up);
-}
-
-static int serial8250_request_port(struct uart_port *port)
-{
- struct uart_8250_port *up = up_to_u8250p(port);
- int ret;
-
- if (port->type == PORT_8250_CIR)
- return -ENODEV;
-
- ret = serial8250_request_std_resource(up);
-
- return ret;
-}
-
-static int fcr_get_rxtrig_bytes(struct uart_8250_port *up)
-{
- const struct serial8250_config *conf_type = &uart_config[up->port.type];
- unsigned char bytes;
-
- bytes = conf_type->rxtrig_bytes[UART_FCR_R_TRIG_BITS(up->fcr)];
-
- return bytes ? bytes : -EOPNOTSUPP;
-}
-
-static int bytes_to_fcr_rxtrig(struct uart_8250_port *up, unsigned char bytes)
-{
- const struct serial8250_config *conf_type = &uart_config[up->port.type];
- int i;
-
- if (!conf_type->rxtrig_bytes[UART_FCR_R_TRIG_BITS(UART_FCR_R_TRIG_00)])
- return -EOPNOTSUPP;
-
- for (i = 1; i < UART_FCR_R_TRIG_MAX_STATE; i++) {
- if (bytes < conf_type->rxtrig_bytes[i])
- /* Use the nearest lower value */
- return (--i) << UART_FCR_R_TRIG_SHIFT;
- }
-
- return UART_FCR_R_TRIG_11;
-}
-
-static int do_get_rxtrig(struct tty_port *port)
-{
- struct uart_state *state = container_of(port, struct uart_state, port);
- struct uart_port *uport = state->uart_port;
- struct uart_8250_port *up =
- container_of(uport, struct uart_8250_port, port);
-
- if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1)
- return -EINVAL;
-
- return fcr_get_rxtrig_bytes(up);
-}
-
-static int do_serial8250_get_rxtrig(struct tty_port *port)
-{
- int rxtrig_bytes;
-
- mutex_lock(&port->mutex);
- rxtrig_bytes = do_get_rxtrig(port);
- mutex_unlock(&port->mutex);
-
- return rxtrig_bytes;
-}
-
-static ssize_t serial8250_get_attr_rx_trig_bytes(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct tty_port *port = dev_get_drvdata(dev);
- int rxtrig_bytes;
-
- rxtrig_bytes = do_serial8250_get_rxtrig(port);
- if (rxtrig_bytes < 0)
- return rxtrig_bytes;
-
- return snprintf(buf, PAGE_SIZE, "%d\n", rxtrig_bytes);
-}
-
-static int do_set_rxtrig(struct tty_port *port, unsigned char bytes)
-{
- struct uart_state *state = container_of(port, struct uart_state, port);
- struct uart_port *uport = state->uart_port;
- struct uart_8250_port *up =
- container_of(uport, struct uart_8250_port, port);
- int rxtrig;
-
- if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1 ||
- up->fifo_bug)
- return -EINVAL;
-
- rxtrig = bytes_to_fcr_rxtrig(up, bytes);
- if (rxtrig < 0)
- return rxtrig;
-
- serial8250_clear_fifos(up);
- up->fcr &= ~UART_FCR_TRIGGER_MASK;
- up->fcr |= (unsigned char)rxtrig;
- serial_out(up, UART_FCR, up->fcr);
- return 0;
-}
-
-static int do_serial8250_set_rxtrig(struct tty_port *port, unsigned char bytes)
-{
- int ret;
-
- mutex_lock(&port->mutex);
- ret = do_set_rxtrig(port, bytes);
- mutex_unlock(&port->mutex);
-
- return ret;
-}
-
-static ssize_t serial8250_set_attr_rx_trig_bytes(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t count)
-{
- struct tty_port *port = dev_get_drvdata(dev);
- unsigned char bytes;
- int ret;
-
- if (!count)
- return -EINVAL;
-
- ret = kstrtou8(buf, 10, &bytes);
- if (ret < 0)
- return ret;
-
- ret = do_serial8250_set_rxtrig(port, bytes);
- if (ret < 0)
- return ret;
-
- return count;
-}
-
-static DEVICE_ATTR(rx_trig_bytes, S_IRUSR | S_IWUSR | S_IRGRP,
- serial8250_get_attr_rx_trig_bytes,
- serial8250_set_attr_rx_trig_bytes);
-
-static struct attribute *serial8250_dev_attrs[] = {
- &dev_attr_rx_trig_bytes.attr,
- NULL,
- };
-
-static struct attribute_group serial8250_dev_attr_group = {
- .attrs = serial8250_dev_attrs,
- };
-
-static void register_dev_spec_attr_grp(struct uart_8250_port *up)
-{
- const struct serial8250_config *conf_type = &uart_config[up->port.type];
-
- if (conf_type->rxtrig_bytes[0])
- up->port.attr_group = &serial8250_dev_attr_group;
-}
-
-static void serial8250_config_port(struct uart_port *port, int flags)
-{
- struct uart_8250_port *up = up_to_u8250p(port);
- int ret;
-
- if (port->type == PORT_8250_CIR)
- return;
-
- /*
- * Find the region that we can probe for. This in turn
- * tells us whether we can probe for the type of port.
- */
- ret = serial8250_request_std_resource(up);
- if (ret < 0)
- return;
-
- if (port->iotype != up->cur_iotype)
- set_io_from_upio(port);
-
- if (flags & UART_CONFIG_TYPE)
- autoconfig(up);
-
- /* if access method is AU, it is a 16550 with a quirk */
- if (port->type == PORT_16550A && port->iotype == UPIO_AU)
- up->bugs |= UART_BUG_NOMSR;
-
- /* HW bugs may trigger IRQ while IIR == NO_INT */
- if (port->type == PORT_TEGRA)
- up->bugs |= UART_BUG_NOMSR;
-
- if (port->type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
- autoconfig_irq(up);
-
- if (port->type == PORT_UNKNOWN)
- serial8250_release_std_resource(up);
-
- /* Fixme: probably not the best place for this */
- if ((port->type == PORT_XR17V35X) ||
- (port->type == PORT_XR17D15X))
- port->handle_irq = exar_handle_irq;
-
- register_dev_spec_attr_grp(up);
- up->fcr = uart_config[up->port.type].fcr;
-}
-
-static int
-serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
- if (ser->irq >= nr_irqs || ser->irq < 0 ||
- ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
- ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS ||
- ser->type == PORT_STARTECH)
- return -EINVAL;
- return 0;
-}
-
-static const char *
-serial8250_type(struct uart_port *port)
-{
- int type = port->type;
-
- if (type >= ARRAY_SIZE(uart_config))
- type = 0;
- return uart_config[type].name;
-}
-
-static const struct uart_ops serial8250_pops = {
- .tx_empty = serial8250_tx_empty,
- .set_mctrl = serial8250_set_mctrl,
- .get_mctrl = serial8250_get_mctrl,
- .stop_tx = serial8250_stop_tx,
- .start_tx = serial8250_start_tx,
- .throttle = serial8250_throttle,
- .unthrottle = serial8250_unthrottle,
- .stop_rx = serial8250_stop_rx,
- .enable_ms = serial8250_enable_ms,
- .break_ctl = serial8250_break_ctl,
- .startup = serial8250_startup,
- .shutdown = serial8250_shutdown,
- .set_termios = serial8250_set_termios,
- .set_ldisc = serial8250_set_ldisc,
- .pm = serial8250_pm,
- .type = serial8250_type,
- .release_port = serial8250_release_port,
- .request_port = serial8250_request_port,
- .config_port = serial8250_config_port,
- .verify_port = serial8250_verify_port,
-#ifdef CONFIG_CONSOLE_POLL
- .poll_get_char = serial8250_get_poll_char,
- .poll_put_char = serial8250_put_poll_char,
-#endif
-};
-
static const struct uart_ops *base_ops;
static struct uart_ops univ8250_port_ops;
@@ -3161,42 +443,6 @@ void serial8250_set_isa_configurator(
}
EXPORT_SYMBOL(serial8250_set_isa_configurator);
-static void serial8250_init_port(struct uart_8250_port *up)
-{
- struct uart_port *port = &up->port;
-
- spin_lock_init(&port->lock);
- port->ops = &serial8250_pops;
-
- up->cur_iotype = 0xFF;
-}
-
-static void serial8250_set_defaults(struct uart_8250_port *up)
-{
- struct uart_port *port = &up->port;
-
- if (up->port.flags & UPF_FIXED_TYPE) {
- unsigned int type = up->port.type;
-
- if (!up->port.fifosize)
- up->port.fifosize = uart_config[type].fifo_size;
- if (!up->tx_loadsz)
- up->tx_loadsz = uart_config[type].tx_loadsz;
- if (!up->capabilities)
- up->capabilities = uart_config[type].flags;
- }
-
- set_io_from_upio(port);
-
- /* default dma handlers */
- if (up->dma) {
- if (!up->dma->tx_dma)
- up->dma->tx_dma = serial8250_tx_dma;
- if (!up->dma->rx_dma)
- up->dma->rx_dma = serial8250_rx_dma;
- }
-}
-
#ifdef CONFIG_SERIAL_8250_RSA
static void univ8250_config_port(struct uart_port *port, int flags)
@@ -3332,6 +578,9 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
for (i = 0; i < nr_uarts; i++) {
struct uart_8250_port *up = &serial8250_ports[i];
+ if (up->port.type == PORT_8250_CIR)
+ continue;
+
if (up->port.dev)
continue;
@@ -3346,94 +595,6 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
#ifdef CONFIG_SERIAL_8250_CONSOLE
-static void serial8250_console_putchar(struct uart_port *port, int ch)
-{
- struct uart_8250_port *up = up_to_u8250p(port);
-
- wait_for_xmitr(up, UART_LSR_THRE);
- serial_port_out(port, UART_TX, ch);
-}
-
-/*
- * Print a string to the serial port trying not to disturb
- * any possible real use of the port...
- *
- * The console_lock must be held when we get here.
- */
-static void serial8250_console_write(struct uart_8250_port *up, const char *s,
- unsigned int count)
-{
- struct uart_port *port = &up->port;
- unsigned long flags;
- unsigned int ier;
- int locked = 1;
-
- touch_nmi_watchdog();
-
- serial8250_rpm_get(up);
-
- if (port->sysrq)
- locked = 0;
- else if (oops_in_progress || in_kdb_printk())
- locked = spin_trylock_irqsave(&port->lock, flags);
- else
- spin_lock_irqsave(&port->lock, flags);
-
- /*
- * First save the IER then disable the interrupts
- */
- ier = serial_port_in(port, UART_IER);
-
- if (up->capabilities & UART_CAP_UUE)
- serial_port_out(port, UART_IER, UART_IER_UUE);
- else
- serial_port_out(port, UART_IER, 0);
-
- /* check scratch reg to see if port powered off during system sleep */
- if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) {
- struct ktermios termios;
- unsigned int baud, quot, frac = 0;
-
- termios.c_cflag = port->cons->cflag;
- if (port->state->port.tty && termios.c_cflag == 0)
- termios.c_cflag = port->state->port.tty->termios.c_cflag;
-
- baud = uart_get_baud_rate(port, &termios, NULL,
- port->uartclk / 16 / 0xffff,
- port->uartclk / 16);
- quot = serial8250_get_divisor(up, baud, &frac);
-
- serial8250_set_divisor(port, baud, quot, frac);
- serial_port_out(port, UART_LCR, up->lcr);
- serial_port_out(port, UART_MCR, UART_MCR_DTR | UART_MCR_RTS);
-
- up->canary = 0;
- }
-
- uart_console_write(port, s, count, serial8250_console_putchar);
-
- /*
- * Finally, wait for transmitter to become empty
- * and restore the IER
- */
- wait_for_xmitr(up, BOTH_EMPTY);
- serial_port_out(port, UART_IER, ier);
-
- /*
- * The receive handling will happen properly because the
- * receive ready bit will still be set; it is not cleared
- * on read. However, modem control will not, we must
- * call it if we have saved something in the saved flags
- * while processing with interrupts off.
- */
- if (up->msr_saved_flags)
- serial8250_modem_status(up);
-
- if (locked)
- spin_unlock_irqrestore(&port->lock, flags);
- serial8250_rpm_put(up);
-}
-
static void univ8250_console_write(struct console *co, const char *s,
unsigned int count)
{
@@ -3442,39 +603,6 @@ static void univ8250_console_write(struct console *co, const char *s,
serial8250_console_write(up, s, count);
}
-static unsigned int probe_baud(struct uart_port *port)
-{
- unsigned char lcr, dll, dlm;
- unsigned int quot;
-
- lcr = serial_port_in(port, UART_LCR);
- serial_port_out(port, UART_LCR, lcr | UART_LCR_DLAB);
- dll = serial_port_in(port, UART_DLL);
- dlm = serial_port_in(port, UART_DLM);
- serial_port_out(port, UART_LCR, lcr);
-
- quot = (dlm << 8) | dll;
- return (port->uartclk / 16) / quot;
-}
-
-static int serial8250_console_setup(struct uart_port *port, char *options, bool probe)
-{
- int baud = 9600;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- if (!port->iobase && !port->membase)
- return -ENODEV;
-
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
- else if (probe)
- baud = probe_baud(port);
-
- return uart_set_options(port, port->cons, baud, parity, bits, flow);
-}
-
static int univ8250_console_setup(struct console *co, char *options)
{
struct uart_port *port;
@@ -3558,6 +686,9 @@ static struct console univ8250_console = {
static int __init univ8250_console_init(void)
{
+ if (nr_uarts == 0)
+ return -ENODEV;
+
serial8250_isa_init_ports();
register_console(&univ8250_console);
return 0;
@@ -3588,7 +719,7 @@ int __init early_serial_setup(struct uart_port *port)
{
struct uart_port *p;
- if (port->line >= ARRAY_SIZE(serial8250_ports))
+ if (port->line >= ARRAY_SIZE(serial8250_ports) || nr_uarts == 0)
return -ENODEV;
serial8250_isa_init_ports();
@@ -3860,7 +991,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
uart->port.mapbase = up->port.mapbase;
uart->port.mapsize = up->port.mapsize;
uart->port.private_data = up->port.private_data;
- uart->port.fifosize = up->port.fifosize;
uart->tx_loadsz = up->tx_loadsz;
uart->capabilities = up->capabilities;
uart->port.throttle = up->port.throttle;
@@ -3909,13 +1039,24 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
if (up->dl_write)
uart->dl_write = up->dl_write;
- if (serial8250_isa_config != NULL)
- serial8250_isa_config(0, &uart->port,
- &uart->capabilities);
+ if (uart->port.type != PORT_8250_CIR) {
+ if (serial8250_isa_config != NULL)
+ serial8250_isa_config(0, &uart->port,
+ &uart->capabilities);
+
+ ret = uart_add_one_port(&serial8250_reg,
+ &uart->port);
+ if (ret == 0)
+ ret = uart->port.line;
+ } else {
+ dev_info(uart->port.dev,
+ "skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n",
+ uart->port.iobase,
+ (unsigned long long)uart->port.mapbase,
+ uart->port.irq);
- ret = uart_add_one_port(&serial8250_reg, &uart->port);
- if (ret == 0)
- ret = uart->port.line;
+ ret = 0;
+ }
}
mutex_unlock(&serial_mutex);
@@ -3955,6 +1096,9 @@ static int __init serial8250_init(void)
{
int ret;
+ if (nr_uarts == 0)
+ return -ENODEV;
+
serial8250_isa_init_ports();
printk(KERN_INFO "Serial: 8250/16550 driver, "
diff --git a/kernel/drivers/tty/serial/8250/8250_dma.c b/kernel/drivers/tty/serial/8250/8250_dma.c
index 21d01a491..78259d3c6 100644
--- a/kernel/drivers/tty/serial/8250/8250_dma.c
+++ b/kernel/drivers/tty/serial/8250/8250_dma.c
@@ -54,9 +54,6 @@ static void __dma_rx_complete(void *param)
struct dma_tx_state state;
int count;
- dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr,
- dma->rx_size, DMA_FROM_DEVICE);
-
dma->rx_running = 0;
dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
@@ -80,10 +77,6 @@ int serial8250_tx_dma(struct uart_8250_port *p)
return 0;
dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
- if (dma->tx_size < p->port.fifosize) {
- ret = -EINVAL;
- goto err;
- }
desc = dmaengine_prep_slave_single(dma->txchan,
dma->tx_addr + xmit->tail,
@@ -156,9 +149,6 @@ int serial8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
dma->rx_cookie = dmaengine_submit(desc);
- dma_sync_single_for_device(dma->rxchan->device->dev, dma->rx_addr,
- dma->rx_size, DMA_FROM_DEVICE);
-
dma_async_issue_pending(dma->rxchan);
return 0;
diff --git a/kernel/drivers/tty/serial/8250/8250_dw.c b/kernel/drivers/tty/serial/8250/8250_dw.c
index 176f18f2e..a5d319e4a 100644
--- a/kernel/drivers/tty/serial/8250/8250_dw.c
+++ b/kernel/drivers/tty/serial/8250/8250_dw.c
@@ -56,7 +56,6 @@
struct dw8250_data {
u8 usr_reg;
- int last_mcr;
int line;
int msr_mask_on;
int msr_mask_off;
@@ -64,6 +63,9 @@ struct dw8250_data {
struct clk *pclk;
struct reset_control *rst;
struct uart_8250_dma dma;
+
+ unsigned int skip_autocfg:1;
+ unsigned int uart_16550_compatible:1;
};
#define BYT_PRV_CLK 0x800
@@ -76,12 +78,6 @@ static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
- /* If reading MSR, report CTS asserted when auto-CTS/RTS enabled */
- if (offset == UART_MSR && d->last_mcr & UART_MCR_AFE) {
- value |= UART_MSR_CTS;
- value &= ~UART_MSR_DCTS;
- }
-
/* Override any modem control signals if needed */
if (offset == UART_MSR) {
value |= d->msr_mask_on;
@@ -101,11 +97,6 @@ static void dw8250_force_idle(struct uart_port *p)
static void dw8250_serial_out(struct uart_port *p, int offset, int value)
{
- struct dw8250_data *d = p->private_data;
-
- if (offset == UART_MCR)
- d->last_mcr = value;
-
writeb(value, p->membase + (offset << p->regshift));
/* Make sure LCR write wasn't ignored */
@@ -144,11 +135,6 @@ static unsigned int dw8250_serial_inq(struct uart_port *p, int offset)
static void dw8250_serial_outq(struct uart_port *p, int offset, int value)
{
- struct dw8250_data *d = p->private_data;
-
- if (offset == UART_MCR)
- d->last_mcr = value;
-
value &= 0xff;
__raw_writeq(value, p->membase + (offset << p->regshift));
/* Read back to ensure register write ordering. */
@@ -175,11 +161,6 @@ static void dw8250_serial_outq(struct uart_port *p, int offset, int value)
static void dw8250_serial_out32(struct uart_port *p, int offset, int value)
{
- struct dw8250_data *d = p->private_data;
-
- if (offset == UART_MCR)
- d->last_mcr = value;
-
writel(value, p->membase + (offset << p->regshift));
/* Make sure LCR write wasn't ignored */
@@ -246,10 +227,6 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
if (IS_ERR(d->clk) || !old)
goto out;
- /* Not requesting clock rates below 1.8432Mhz */
- if (baud < 115200)
- baud = 115200;
-
clk_disable_unprepare(d->clk);
rate = clk_round_rate(d->clk, baud * 16);
ret = clk_set_rate(d->clk, rate);
@@ -257,28 +234,86 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
if (!ret)
p->uartclk = rate;
+
+ p->status &= ~UPSTAT_AUTOCTS;
+ if (termios->c_cflag & CRTSCTS)
+ p->status |= UPSTAT_AUTOCTS;
+
out:
serial8250_do_set_termios(p, termios, old);
}
-static bool dw8250_dma_filter(struct dma_chan *chan, void *param)
+/*
+ * dw8250_fallback_dma_filter will prevent the UART from getting just any free
+ * channel on platforms that have DMA engines, but don't have any channels
+ * assigned to the UART.
+ *
+ * REVISIT: This is a work around for limitation in the DMA Engine API. Once the
+ * core problem is fixed, this function is no longer needed.
+ */
+static bool dw8250_fallback_dma_filter(struct dma_chan *chan, void *param)
{
return false;
}
-static void dw8250_setup_port(struct uart_8250_port *up)
+static bool dw8250_idma_filter(struct dma_chan *chan, void *param)
{
- struct uart_port *p = &up->port;
- u32 reg = readl(p->membase + DW_UART_UCV);
+ return param == chan->device->dev->parent;
+}
+
+static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
+{
+ if (p->dev->of_node) {
+ struct device_node *np = p->dev->of_node;
+ int id;
+
+ /* get index of serial line, if found in DT aliases */
+ id = of_alias_get_id(np, "serial");
+ if (id >= 0)
+ p->line = id;
+#ifdef CONFIG_64BIT
+ if (of_device_is_compatible(np, "cavium,octeon-3860-uart")) {
+ p->serial_in = dw8250_serial_inq;
+ p->serial_out = dw8250_serial_outq;
+ p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
+ p->type = PORT_OCTEON;
+ data->usr_reg = 0x27;
+ data->skip_autocfg = true;
+ }
+#endif
+ } else if (has_acpi_companion(p->dev)) {
+ p->iotype = UPIO_MEM32;
+ p->regshift = 2;
+ p->serial_in = dw8250_serial_in32;
+ p->set_termios = dw8250_set_termios;
+ /* So far none of there implement the Busy Functionality */
+ data->uart_16550_compatible = true;
+ }
+
+ /* Platforms with iDMA */
+ if (platform_get_resource_byname(to_platform_device(p->dev),
+ IORESOURCE_MEM, "lpss_priv")) {
+ p->set_termios = dw8250_set_termios;
+ data->dma.rx_param = p->dev->parent;
+ data->dma.tx_param = p->dev->parent;
+ data->dma.fn = dw8250_idma_filter;
+ }
+}
+
+static void dw8250_setup_port(struct uart_port *p)
+{
+ struct uart_8250_port *up = up_to_u8250p(p);
+ u32 reg;
/*
* If the Component Version Register returns zero, we know that
* ADDITIONAL_FEATURES are not enabled. No need to go any further.
*/
+ reg = readl(p->membase + DW_UART_UCV);
if (!reg)
return;
- dev_dbg_ratelimited(p->dev, "Designware UART version %c.%c%c\n",
+ dev_dbg(p->dev, "Designware UART version %c.%c%c\n",
(reg >> 24) & 0xff, (reg >> 16) & 0xff, (reg >> 8) & 0xff);
reg = readl(p->membase + DW_UART_CPR);
@@ -290,7 +325,6 @@ static void dw8250_setup_port(struct uart_8250_port *up)
p->type = PORT_16550A;
p->flags |= UPF_FIXED_TYPE;
p->fifosize = DW_UART_CPR_FIFO_SIZE(reg);
- up->tx_loadsz = p->fifosize;
up->capabilities = UART_CAP_FIFO;
}
@@ -298,149 +332,91 @@ static void dw8250_setup_port(struct uart_8250_port *up)
up->capabilities |= UART_CAP_AFE;
}
-static int dw8250_probe_of(struct uart_port *p,
- struct dw8250_data *data)
+static int dw8250_probe(struct platform_device *pdev)
{
- struct device_node *np = p->dev->of_node;
- struct uart_8250_port *up = up_to_u8250p(p);
- u32 val;
- bool has_ucv = true;
- int id;
+ struct uart_8250_port uart = {};
+ struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ int irq = platform_get_irq(pdev, 0);
+ struct uart_port *p = &uart.port;
+ struct dw8250_data *data;
+ int err;
+ u32 val;
-#ifdef CONFIG_64BIT
- if (of_device_is_compatible(np, "cavium,octeon-3860-uart")) {
- p->serial_in = dw8250_serial_inq;
- p->serial_out = dw8250_serial_outq;
- p->flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
- p->type = PORT_OCTEON;
- data->usr_reg = 0x27;
- has_ucv = false;
- } else
-#endif
- if (!of_property_read_u32(np, "reg-io-width", &val)) {
- switch (val) {
- case 1:
- break;
- case 4:
- p->iotype = UPIO_MEM32;
- p->serial_in = dw8250_serial_in32;
- p->serial_out = dw8250_serial_out32;
- break;
- default:
- dev_err(p->dev, "unsupported reg-io-width (%u)\n", val);
- return -EINVAL;
- }
+ if (!regs) {
+ dev_err(&pdev->dev, "no registers defined\n");
+ return -EINVAL;
}
- if (has_ucv)
- dw8250_setup_port(up);
- /* if we have a valid fifosize, try hooking up DMA here */
- if (p->fifosize) {
- up->dma = &data->dma;
-
- up->dma->rxconf.src_maxburst = p->fifosize / 4;
- up->dma->txconf.dst_maxburst = p->fifosize / 4;
+ if (irq < 0) {
+ if (irq != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "cannot get irq\n");
+ return irq;
}
- if (!of_property_read_u32(np, "reg-shift", &val))
+ spin_lock_init(&p->lock);
+ p->mapbase = regs->start;
+ p->irq = irq;
+ p->handle_irq = dw8250_handle_irq;
+ p->pm = dw8250_do_pm;
+ p->type = PORT_8250;
+ p->flags = UPF_SHARE_IRQ | UPF_FIXED_PORT;
+ p->dev = &pdev->dev;
+ p->iotype = UPIO_MEM;
+ p->serial_in = dw8250_serial_in;
+ p->serial_out = dw8250_serial_out;
+
+ p->membase = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
+ if (!p->membase)
+ return -ENOMEM;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->dma.fn = dw8250_fallback_dma_filter;
+ data->usr_reg = DW_UART_USR;
+ p->private_data = data;
+
+ data->uart_16550_compatible = device_property_read_bool(p->dev,
+ "snps,uart-16550-compatible");
+
+ err = device_property_read_u32(p->dev, "reg-shift", &val);
+ if (!err)
p->regshift = val;
- /* get index of serial line, if found in DT aliases */
- id = of_alias_get_id(np, "serial");
- if (id >= 0)
- p->line = id;
+ err = device_property_read_u32(p->dev, "reg-io-width", &val);
+ if (!err && val == 4) {
+ p->iotype = UPIO_MEM32;
+ p->serial_in = dw8250_serial_in32;
+ p->serial_out = dw8250_serial_out32;
+ }
- if (of_property_read_bool(np, "dcd-override")) {
+ if (device_property_read_bool(p->dev, "dcd-override")) {
/* Always report DCD as active */
data->msr_mask_on |= UART_MSR_DCD;
data->msr_mask_off |= UART_MSR_DDCD;
}
- if (of_property_read_bool(np, "dsr-override")) {
+ if (device_property_read_bool(p->dev, "dsr-override")) {
/* Always report DSR as active */
data->msr_mask_on |= UART_MSR_DSR;
data->msr_mask_off |= UART_MSR_DDSR;
}
- if (of_property_read_bool(np, "cts-override")) {
+ if (device_property_read_bool(p->dev, "cts-override")) {
/* Always report CTS as active */
data->msr_mask_on |= UART_MSR_CTS;
data->msr_mask_off |= UART_MSR_DCTS;
}
- if (of_property_read_bool(np, "ri-override")) {
+ if (device_property_read_bool(p->dev, "ri-override")) {
/* Always report Ring indicator as inactive */
data->msr_mask_off |= UART_MSR_RI;
data->msr_mask_off |= UART_MSR_TERI;
}
- return 0;
-}
-
-static int dw8250_probe_acpi(struct uart_8250_port *up,
- struct dw8250_data *data)
-{
- struct uart_port *p = &up->port;
-
- dw8250_setup_port(up);
-
- p->iotype = UPIO_MEM32;
- p->serial_in = dw8250_serial_in32;
- p->serial_out = dw8250_serial_out32;
- p->regshift = 2;
-
- up->dma = &data->dma;
-
- up->dma->rxconf.src_maxburst = p->fifosize / 4;
- up->dma->txconf.dst_maxburst = p->fifosize / 4;
-
- up->port.set_termios = dw8250_set_termios;
-
- return 0;
-}
-
-static int dw8250_probe(struct platform_device *pdev)
-{
- struct uart_8250_port uart = {};
- struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- int irq = platform_get_irq(pdev, 0);
- struct dw8250_data *data;
- int err;
-
- if (!regs) {
- dev_err(&pdev->dev, "no registers defined\n");
- return -EINVAL;
- }
-
- if (irq < 0) {
- if (irq != -EPROBE_DEFER)
- dev_err(&pdev->dev, "cannot get irq\n");
- return irq;
- }
-
- spin_lock_init(&uart.port.lock);
- uart.port.mapbase = regs->start;
- uart.port.irq = irq;
- uart.port.handle_irq = dw8250_handle_irq;
- uart.port.pm = dw8250_do_pm;
- uart.port.type = PORT_8250;
- uart.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_FIXED_PORT;
- uart.port.dev = &pdev->dev;
-
- uart.port.membase = devm_ioremap(&pdev->dev, regs->start,
- resource_size(regs));
- if (!uart.port.membase)
- return -ENOMEM;
-
- data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- data->usr_reg = DW_UART_USR;
-
/* Always ask for fixed clock rate from a property. */
- device_property_read_u32(&pdev->dev, "clock-frequency",
- &uart.port.uartclk);
+ device_property_read_u32(p->dev, "clock-frequency", &p->uartclk);
/* If there is separate baudclk, get the rate from it. */
data->clk = devm_clk_get(&pdev->dev, "baudclk");
@@ -454,11 +430,11 @@ static int dw8250_probe(struct platform_device *pdev)
dev_warn(&pdev->dev, "could not enable optional baudclk: %d\n",
err);
else
- uart.port.uartclk = clk_get_rate(data->clk);
+ p->uartclk = clk_get_rate(data->clk);
}
/* If no clock rate is defined, fail. */
- if (!uart.port.uartclk) {
+ if (!p->uartclk) {
dev_err(&pdev->dev, "clock rate not defined\n");
return -EINVAL;
}
@@ -484,26 +460,22 @@ static int dw8250_probe(struct platform_device *pdev)
if (!IS_ERR(data->rst))
reset_control_deassert(data->rst);
- data->dma.rx_param = data;
- data->dma.tx_param = data;
- data->dma.fn = dw8250_dma_filter;
+ dw8250_quirks(p, data);
- uart.port.iotype = UPIO_MEM;
- uart.port.serial_in = dw8250_serial_in;
- uart.port.serial_out = dw8250_serial_out;
- uart.port.private_data = data;
+ /* If the Busy Functionality is not implemented, don't handle it */
+ if (data->uart_16550_compatible) {
+ p->serial_out = NULL;
+ p->handle_irq = NULL;
+ }
- if (pdev->dev.of_node) {
- err = dw8250_probe_of(&uart.port, data);
- if (err)
- goto err_reset;
- } else if (ACPI_HANDLE(&pdev->dev)) {
- err = dw8250_probe_acpi(&uart, data);
- if (err)
- goto err_reset;
- } else {
- err = -ENODEV;
- goto err_reset;
+ if (!data->skip_autocfg)
+ dw8250_setup_port(p);
+
+ /* If we have a valid fifosize, try hooking up DMA */
+ if (p->fifosize) {
+ data->dma.rxconf.src_maxburst = p->fifosize / 4;
+ data->dma.txconf.dst_maxburst = p->fifosize / 4;
+ uart.dma = &data->dma;
}
data->line = serial8250_register_8250_port(&uart);
diff --git a/kernel/drivers/tty/serial/8250/8250_early.c b/kernel/drivers/tty/serial/8250/8250_early.c
index 6c0fd8b9d..ceb85792a 100644
--- a/kernel/drivers/tty/serial/8250/8250_early.c
+++ b/kernel/drivers/tty/serial/8250/8250_early.c
@@ -29,13 +29,15 @@
#include <linux/tty.h>
#include <linux/init.h>
#include <linux/console.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/serial_reg.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <asm/io.h>
#include <asm/serial.h>
-unsigned int __weak __init serial8250_early_in(struct uart_port *port, int offset)
+static unsigned int __init serial8250_early_in(struct uart_port *port, int offset)
{
switch (port->iotype) {
case UPIO_MEM:
@@ -51,7 +53,7 @@ unsigned int __weak __init serial8250_early_in(struct uart_port *port, int offse
}
}
-void __weak __init serial8250_early_out(struct uart_port *port, int offset, int value)
+static void __init serial8250_early_out(struct uart_port *port, int offset, int value)
{
switch (port->iotype) {
case UPIO_MEM:
@@ -131,7 +133,7 @@ static void __init init_port(struct earlycon_device *device)
serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB);
}
-static int __init early_serial8250_setup(struct earlycon_device *device,
+int __init early_serial8250_setup(struct earlycon_device *device,
const char *options)
{
if (!(device->port.membase || device->port.iobase))
@@ -152,3 +154,5 @@ static int __init early_serial8250_setup(struct earlycon_device *device,
}
EARLYCON_DECLARE(uart8250, early_serial8250_setup);
EARLYCON_DECLARE(uart, early_serial8250_setup);
+OF_EARLYCON_DECLARE(ns16550, "ns16550", early_serial8250_setup);
+OF_EARLYCON_DECLARE(ns16550a, "ns16550a", early_serial8250_setup);
diff --git a/kernel/drivers/tty/serial/8250/8250_fintek.c b/kernel/drivers/tty/serial/8250/8250_fintek.c
index 5815e81b5..89474399a 100644
--- a/kernel/drivers/tty/serial/8250/8250_fintek.c
+++ b/kernel/drivers/tty/serial/8250/8250_fintek.c
@@ -17,18 +17,19 @@
#include <linux/serial_core.h>
#include "8250.h"
-#define ADDR_PORT 0x4E
-#define DATA_PORT 0x4F
-#define ENTRY_KEY 0x77
+#define ADDR_PORT 0
+#define DATA_PORT 1
#define EXIT_KEY 0xAA
#define CHIP_ID1 0x20
-#define CHIP_ID1_VAL 0x02
#define CHIP_ID2 0x21
-#define CHIP_ID2_VAL 0x16
+#define CHIP_ID_0 0x1602
+#define CHIP_ID_1 0x0501
#define VENDOR_ID1 0x23
#define VENDOR_ID1_VAL 0x19
#define VENDOR_ID2 0x24
#define VENDOR_ID2_VAL 0x34
+#define IO_ADDR1 0x61
+#define IO_ADDR2 0x60
#define LDN 0x7
#define RS485 0xF0
@@ -39,51 +40,49 @@
#define DRIVER_NAME "8250_fintek"
-static int fintek_8250_enter_key(void){
+struct fintek_8250 {
+ u16 base_port;
+ u8 index;
+ u8 key;
+ long line;
+};
+
+static int fintek_8250_enter_key(u16 base_port, u8 key)
+{
- if (!request_muxed_region(ADDR_PORT, 2, DRIVER_NAME))
+ if (!request_muxed_region(base_port, 2, DRIVER_NAME))
return -EBUSY;
- outb(ENTRY_KEY, ADDR_PORT);
- outb(ENTRY_KEY, ADDR_PORT);
+ outb(key, base_port + ADDR_PORT);
+ outb(key, base_port + ADDR_PORT);
return 0;
}
-static void fintek_8250_exit_key(void){
-
- outb(EXIT_KEY, ADDR_PORT);
- release_region(ADDR_PORT, 2);
-}
-
-static int fintek_8250_get_index(resource_size_t base_addr)
+static void fintek_8250_exit_key(u16 base_port)
{
- resource_size_t base[] = {0x3f8, 0x2f8, 0x3e8, 0x2e8};
- int i;
-
- for (i = 0; i < ARRAY_SIZE(base); i++)
- if (base_addr == base[i])
- return i;
- return -ENODEV;
+ outb(EXIT_KEY, base_port + ADDR_PORT);
+ release_region(base_port + ADDR_PORT, 2);
}
-static int fintek_8250_check_id(void)
+static int fintek_8250_check_id(u16 base_port)
{
+ u16 chip;
- outb(CHIP_ID1, ADDR_PORT);
- if (inb(DATA_PORT) != CHIP_ID1_VAL)
+ outb(VENDOR_ID1, base_port + ADDR_PORT);
+ if (inb(base_port + DATA_PORT) != VENDOR_ID1_VAL)
return -ENODEV;
- outb(CHIP_ID2, ADDR_PORT);
- if (inb(DATA_PORT) != CHIP_ID2_VAL)
+ outb(VENDOR_ID2, base_port + ADDR_PORT);
+ if (inb(base_port + DATA_PORT) != VENDOR_ID2_VAL)
return -ENODEV;
- outb(VENDOR_ID1, ADDR_PORT);
- if (inb(DATA_PORT) != VENDOR_ID1_VAL)
- return -ENODEV;
+ outb(CHIP_ID1, base_port + ADDR_PORT);
+ chip = inb(base_port + DATA_PORT);
+ outb(CHIP_ID2, base_port + ADDR_PORT);
+ chip |= inb(base_port + DATA_PORT) << 8;
- outb(VENDOR_ID2, ADDR_PORT);
- if (inb(DATA_PORT) != VENDOR_ID2_VAL)
+ if (chip != CHIP_ID_0 && chip != CHIP_ID_1)
return -ENODEV;
return 0;
@@ -93,9 +92,9 @@ static int fintek_8250_rs485_config(struct uart_port *port,
struct serial_rs485 *rs485)
{
uint8_t config = 0;
- int index = fintek_8250_get_index(port->iobase);
+ struct fintek_8250 *pdata = port->private_data;
- if (index < 0)
+ if (!pdata)
return -EINVAL;
if (rs485->flags & SER_RS485_ENABLED)
@@ -125,44 +124,84 @@ static int fintek_8250_rs485_config(struct uart_port *port,
if (rs485->flags & SER_RS485_RTS_ON_SEND)
config |= RTS_INVERT;
- if (fintek_8250_enter_key())
+ if (fintek_8250_enter_key(pdata->base_port, pdata->key))
return -EBUSY;
- outb(LDN, ADDR_PORT);
- outb(index, DATA_PORT);
- outb(RS485, ADDR_PORT);
- outb(config, DATA_PORT);
- fintek_8250_exit_key();
+ outb(LDN, pdata->base_port + ADDR_PORT);
+ outb(pdata->index, pdata->base_port + DATA_PORT);
+ outb(RS485, pdata->base_port + ADDR_PORT);
+ outb(config, pdata->base_port + DATA_PORT);
+ fintek_8250_exit_key(pdata->base_port);
port->rs485 = *rs485;
return 0;
}
+static int fintek_8250_base_port(u16 io_address, u8 *key, u8 *index)
+{
+ static const u16 addr[] = {0x4e, 0x2e};
+ static const u8 keys[] = {0x77, 0xa0, 0x87, 0x67};
+ int i, j, k;
+
+ for (i = 0; i < ARRAY_SIZE(addr); i++) {
+ for (j = 0; j < ARRAY_SIZE(keys); j++) {
+
+ if (fintek_8250_enter_key(addr[i], keys[j]))
+ continue;
+ if (fintek_8250_check_id(addr[i])) {
+ fintek_8250_exit_key(addr[i]);
+ continue;
+ }
+
+ for (k = 0; k < 4; k++) {
+ u16 aux;
+
+ outb(LDN, addr[i] + ADDR_PORT);
+ outb(k, addr[i] + DATA_PORT);
+
+ outb(IO_ADDR1, addr[i] + ADDR_PORT);
+ aux = inb(addr[i] + DATA_PORT);
+ outb(IO_ADDR2, addr[i] + ADDR_PORT);
+ aux |= inb(addr[i] + DATA_PORT) << 8;
+ if (aux != io_address)
+ continue;
+
+ fintek_8250_exit_key(addr[i]);
+ *key = keys[j];
+ *index = k;
+ return addr[i];
+ }
+ fintek_8250_exit_key(addr[i]);
+ }
+ }
+
+ return -ENODEV;
+}
+
static int
fintek_8250_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
{
- int line;
struct uart_8250_port uart;
- int ret;
+ struct fintek_8250 *pdata;
+ int base_port;
+ u8 key;
+ u8 index;
if (!pnp_port_valid(dev, 0))
return -ENODEV;
- if (fintek_8250_get_index(pnp_port_start(dev, 0)) < 0)
+ base_port = fintek_8250_base_port(pnp_port_start(dev, 0), &key, &index);
+ if (base_port < 0)
return -ENODEV;
- /* Enable configuration registers*/
- if (fintek_8250_enter_key())
- return -EBUSY;
+ memset(&uart, 0, sizeof(uart));
- /*Check ID*/
- ret = fintek_8250_check_id();
- fintek_8250_exit_key();
- if (ret)
- return ret;
+ pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+ uart.port.private_data = pdata;
- memset(&uart, 0, sizeof(uart));
if (!pnp_irq_valid(dev, 0))
return -ENODEV;
uart.port.irq = pnp_irq(dev, 0);
@@ -176,40 +215,43 @@ fintek_8250_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
uart.port.uartclk = 1843200;
uart.port.dev = &dev->dev;
- line = serial8250_register_8250_port(&uart);
- if (line < 0)
+ pdata->key = key;
+ pdata->base_port = base_port;
+ pdata->index = index;
+ pdata->line = serial8250_register_8250_port(&uart);
+ if (pdata->line < 0)
return -ENODEV;
- pnp_set_drvdata(dev, (void *)((long)line + 1));
+ pnp_set_drvdata(dev, pdata);
return 0;
}
static void fintek_8250_remove(struct pnp_dev *dev)
{
- long line = (long)pnp_get_drvdata(dev);
+ struct fintek_8250 *pdata = pnp_get_drvdata(dev);
- if (line)
- serial8250_unregister_port(line - 1);
+ if (pdata)
+ serial8250_unregister_port(pdata->line);
}
#ifdef CONFIG_PM
static int fintek_8250_suspend(struct pnp_dev *dev, pm_message_t state)
{
- long line = (long)pnp_get_drvdata(dev);
+ struct fintek_8250 *pdata = pnp_get_drvdata(dev);
- if (!line)
+ if (!pdata)
return -ENODEV;
- serial8250_suspend_port(line - 1);
+ serial8250_suspend_port(pdata->line);
return 0;
}
static int fintek_8250_resume(struct pnp_dev *dev)
{
- long line = (long)pnp_get_drvdata(dev);
+ struct fintek_8250 *pdata = pnp_get_drvdata(dev);
- if (!line)
+ if (!pdata)
return -ENODEV;
- serial8250_resume_port(line - 1);
+ serial8250_resume_port(pdata->line);
return 0;
}
#else
diff --git a/kernel/drivers/tty/serial/8250/8250_fsl.c b/kernel/drivers/tty/serial/8250/8250_fsl.c
index c0533a57e..910bfee5a 100644
--- a/kernel/drivers/tty/serial/8250/8250_fsl.c
+++ b/kernel/drivers/tty/serial/8250/8250_fsl.c
@@ -60,3 +60,4 @@ int fsl8250_handle_irq(struct uart_port *port)
spin_unlock_irqrestore(&up->port.lock, flags);
return 1;
}
+EXPORT_SYMBOL_GPL(fsl8250_handle_irq);
diff --git a/kernel/drivers/tty/serial/8250/8250_ingenic.c b/kernel/drivers/tty/serial/8250/8250_ingenic.c
new file mode 100644
index 000000000..49394b4c5
--- /dev/null
+++ b/kernel/drivers/tty/serial/8250/8250_ingenic.c
@@ -0,0 +1,345 @@
+/*
+ * Copyright (C) 2010 Lars-Peter Clausen <lars@metafoo.de>
+ * Copyright (C) 2015 Imagination Technologies
+ *
+ * Ingenic SoC UART support
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/io.h>
+#include <linux/libfdt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+
+#include "8250.h"
+
+/** ingenic_uart_config: SOC specific config data. */
+struct ingenic_uart_config {
+ int tx_loadsz;
+ int fifosize;
+};
+
+struct ingenic_uart_data {
+ struct clk *clk_module;
+ struct clk *clk_baud;
+ int line;
+};
+
+static const struct of_device_id of_match[];
+
+#define UART_FCR_UME BIT(4)
+
+#define UART_MCR_MDCE BIT(7)
+#define UART_MCR_FCM BIT(6)
+
+static struct earlycon_device *early_device;
+
+static uint8_t __init early_in(struct uart_port *port, int offset)
+{
+ return readl(port->membase + (offset << 2));
+}
+
+static void __init early_out(struct uart_port *port, int offset, uint8_t value)
+{
+ writel(value, port->membase + (offset << 2));
+}
+
+static void __init ingenic_early_console_putc(struct uart_port *port, int c)
+{
+ uint8_t lsr;
+
+ do {
+ lsr = early_in(port, UART_LSR);
+ } while ((lsr & UART_LSR_TEMT) == 0);
+
+ early_out(port, UART_TX, c);
+}
+
+static void __init ingenic_early_console_write(struct console *console,
+ const char *s, unsigned int count)
+{
+ uart_console_write(&early_device->port, s, count,
+ ingenic_early_console_putc);
+}
+
+static void __init ingenic_early_console_setup_clock(struct earlycon_device *dev)
+{
+ void *fdt = initial_boot_params;
+ const __be32 *prop;
+ int offset;
+
+ offset = fdt_path_offset(fdt, "/ext");
+ if (offset < 0)
+ return;
+
+ prop = fdt_getprop(fdt, offset, "clock-frequency", NULL);
+ if (!prop)
+ return;
+
+ dev->port.uartclk = be32_to_cpup(prop);
+}
+
+static int __init ingenic_early_console_setup(struct earlycon_device *dev,
+ const char *opt)
+{
+ struct uart_port *port = &dev->port;
+ unsigned int baud, divisor;
+
+ if (!dev->port.membase)
+ return -ENODEV;
+
+ ingenic_early_console_setup_clock(dev);
+
+ baud = dev->baud ?: 115200;
+ divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * baud);
+
+ early_out(port, UART_IER, 0);
+ early_out(port, UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8);
+ early_out(port, UART_DLL, 0);
+ early_out(port, UART_DLM, 0);
+ early_out(port, UART_LCR, UART_LCR_WLEN8);
+ early_out(port, UART_FCR, UART_FCR_UME | UART_FCR_CLEAR_XMIT |
+ UART_FCR_CLEAR_RCVR | UART_FCR_ENABLE_FIFO);
+ early_out(port, UART_MCR, UART_MCR_RTS | UART_MCR_DTR);
+
+ early_out(port, UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8);
+ early_out(port, UART_DLL, divisor & 0xff);
+ early_out(port, UART_DLM, (divisor >> 8) & 0xff);
+ early_out(port, UART_LCR, UART_LCR_WLEN8);
+
+ early_device = dev;
+ dev->con->write = ingenic_early_console_write;
+
+ return 0;
+}
+
+EARLYCON_DECLARE(jz4740_uart, ingenic_early_console_setup);
+OF_EARLYCON_DECLARE(jz4740_uart, "ingenic,jz4740-uart",
+ ingenic_early_console_setup);
+
+EARLYCON_DECLARE(jz4775_uart, ingenic_early_console_setup);
+OF_EARLYCON_DECLARE(jz4775_uart, "ingenic,jz4775-uart",
+ ingenic_early_console_setup);
+
+EARLYCON_DECLARE(jz4780_uart, ingenic_early_console_setup);
+OF_EARLYCON_DECLARE(jz4780_uart, "ingenic,jz4780-uart",
+ ingenic_early_console_setup);
+
+static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
+{
+ int ier;
+
+ switch (offset) {
+ case UART_FCR:
+ /* UART module enable */
+ value |= UART_FCR_UME;
+ break;
+
+ case UART_IER:
+ /* Enable receive timeout interrupt with the
+ * receive line status interrupt */
+ value |= (value & 0x4) << 2;
+ break;
+
+ case UART_MCR:
+ /* If we have enabled modem status IRQs we should enable modem
+ * mode. */
+ ier = p->serial_in(p, UART_IER);
+
+ if (ier & UART_IER_MSI)
+ value |= UART_MCR_MDCE | UART_MCR_FCM;
+ else
+ value &= ~(UART_MCR_MDCE | UART_MCR_FCM);
+ break;
+
+ default:
+ break;
+ }
+
+ writeb(value, p->membase + (offset << p->regshift));
+}
+
+static unsigned int ingenic_uart_serial_in(struct uart_port *p, int offset)
+{
+ unsigned int value;
+
+ value = readb(p->membase + (offset << p->regshift));
+
+ /* Hide non-16550 compliant bits from higher levels */
+ switch (offset) {
+ case UART_FCR:
+ value &= ~UART_FCR_UME;
+ break;
+
+ case UART_MCR:
+ value &= ~(UART_MCR_MDCE | UART_MCR_FCM);
+ break;
+
+ default:
+ break;
+ }
+ return value;
+}
+
+static int ingenic_uart_probe(struct platform_device *pdev)
+{
+ struct uart_8250_port uart = {};
+ struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ struct ingenic_uart_data *data;
+ const struct ingenic_uart_config *cdata;
+ const struct of_device_id *match;
+ int err, line;
+
+ match = of_match_device(of_match, &pdev->dev);
+ if (!match) {
+ dev_err(&pdev->dev, "Error: No device match found\n");
+ return -ENODEV;
+ }
+ cdata = match->data;
+
+ if (!regs || !irq) {
+ dev_err(&pdev->dev, "no registers/irq defined\n");
+ return -EINVAL;
+ }
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ spin_lock_init(&uart.port.lock);
+ uart.port.type = PORT_16550A;
+ uart.port.flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE;
+ uart.port.iotype = UPIO_MEM;
+ uart.port.mapbase = regs->start;
+ uart.port.regshift = 2;
+ uart.port.serial_out = ingenic_uart_serial_out;
+ uart.port.serial_in = ingenic_uart_serial_in;
+ uart.port.irq = irq->start;
+ uart.port.dev = &pdev->dev;
+ uart.port.fifosize = cdata->fifosize;
+ uart.tx_loadsz = cdata->tx_loadsz;
+ uart.capabilities = UART_CAP_FIFO | UART_CAP_RTOIE;
+
+ /* Check for a fixed line number */
+ line = of_alias_get_id(pdev->dev.of_node, "serial");
+ if (line >= 0)
+ uart.port.line = line;
+
+ uart.port.membase = devm_ioremap(&pdev->dev, regs->start,
+ resource_size(regs));
+ if (!uart.port.membase)
+ return -ENOMEM;
+
+ data->clk_module = devm_clk_get(&pdev->dev, "module");
+ if (IS_ERR(data->clk_module)) {
+ err = PTR_ERR(data->clk_module);
+ if (err != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "unable to get module clock: %d\n", err);
+ return err;
+ }
+
+ data->clk_baud = devm_clk_get(&pdev->dev, "baud");
+ if (IS_ERR(data->clk_baud)) {
+ err = PTR_ERR(data->clk_baud);
+ if (err != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "unable to get baud clock: %d\n", err);
+ return err;
+ }
+
+ err = clk_prepare_enable(data->clk_module);
+ if (err) {
+ dev_err(&pdev->dev, "could not enable module clock: %d\n", err);
+ goto out;
+ }
+
+ err = clk_prepare_enable(data->clk_baud);
+ if (err) {
+ dev_err(&pdev->dev, "could not enable baud clock: %d\n", err);
+ goto out_disable_moduleclk;
+ }
+ uart.port.uartclk = clk_get_rate(data->clk_baud);
+
+ data->line = serial8250_register_8250_port(&uart);
+ if (data->line < 0) {
+ err = data->line;
+ goto out_disable_baudclk;
+ }
+
+ platform_set_drvdata(pdev, data);
+ return 0;
+
+out_disable_baudclk:
+ clk_disable_unprepare(data->clk_baud);
+out_disable_moduleclk:
+ clk_disable_unprepare(data->clk_module);
+out:
+ return err;
+}
+
+static int ingenic_uart_remove(struct platform_device *pdev)
+{
+ struct ingenic_uart_data *data = platform_get_drvdata(pdev);
+
+ serial8250_unregister_port(data->line);
+ clk_disable_unprepare(data->clk_module);
+ clk_disable_unprepare(data->clk_baud);
+ return 0;
+}
+
+static const struct ingenic_uart_config jz4740_uart_config = {
+ .tx_loadsz = 8,
+ .fifosize = 16,
+};
+
+static const struct ingenic_uart_config jz4760_uart_config = {
+ .tx_loadsz = 16,
+ .fifosize = 32,
+};
+
+static const struct ingenic_uart_config jz4780_uart_config = {
+ .tx_loadsz = 32,
+ .fifosize = 64,
+};
+
+static const struct of_device_id of_match[] = {
+ { .compatible = "ingenic,jz4740-uart", .data = &jz4740_uart_config },
+ { .compatible = "ingenic,jz4760-uart", .data = &jz4760_uart_config },
+ { .compatible = "ingenic,jz4775-uart", .data = &jz4760_uart_config },
+ { .compatible = "ingenic,jz4780-uart", .data = &jz4780_uart_config },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_match);
+
+static struct platform_driver ingenic_uart_platform_driver = {
+ .driver = {
+ .name = "ingenic-uart",
+ .of_match_table = of_match,
+ },
+ .probe = ingenic_uart_probe,
+ .remove = ingenic_uart_remove,
+};
+
+module_platform_driver(ingenic_uart_platform_driver);
+
+MODULE_AUTHOR("Paul Burton");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Ingenic SoC UART driver");
diff --git a/kernel/drivers/tty/serial/8250/8250_lpc18xx.c b/kernel/drivers/tty/serial/8250/8250_lpc18xx.c
new file mode 100644
index 000000000..99cd47885
--- /dev/null
+++ b/kernel/drivers/tty/serial/8250/8250_lpc18xx.c
@@ -0,0 +1,230 @@
+/*
+ * Serial port driver for NXP LPC18xx/43xx UART
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on 8250_mtk.c:
+ * Copyright (c) 2014 MundoReader S.L.
+ * Matthias Brugger <matthias.bgg@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "8250.h"
+
+/* Additional LPC18xx/43xx 8250 registers and bits */
+#define LPC18XX_UART_RS485CTRL (0x04c / sizeof(u32))
+#define LPC18XX_UART_RS485CTRL_NMMEN BIT(0)
+#define LPC18XX_UART_RS485CTRL_DCTRL BIT(4)
+#define LPC18XX_UART_RS485CTRL_OINV BIT(5)
+#define LPC18XX_UART_RS485DLY (0x054 / sizeof(u32))
+#define LPC18XX_UART_RS485DLY_MAX 255
+
+struct lpc18xx_uart_data {
+ struct uart_8250_dma dma;
+ struct clk *clk_uart;
+ struct clk *clk_reg;
+ int line;
+};
+
+static int lpc18xx_rs485_config(struct uart_port *port,
+ struct serial_rs485 *rs485)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+ u32 rs485_ctrl_reg = 0;
+ u32 rs485_dly_reg = 0;
+ unsigned baud_clk;
+
+ if (rs485->flags & SER_RS485_ENABLED)
+ memset(rs485->padding, 0, sizeof(rs485->padding));
+ else
+ memset(rs485, 0, sizeof(*rs485));
+
+ rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND |
+ SER_RS485_RTS_AFTER_SEND;
+
+ if (rs485->flags & SER_RS485_ENABLED) {
+ rs485_ctrl_reg |= LPC18XX_UART_RS485CTRL_NMMEN |
+ LPC18XX_UART_RS485CTRL_DCTRL;
+
+ if (rs485->flags & SER_RS485_RTS_ON_SEND) {
+ rs485_ctrl_reg |= LPC18XX_UART_RS485CTRL_OINV;
+ rs485->flags &= ~SER_RS485_RTS_AFTER_SEND;
+ } else {
+ rs485->flags |= SER_RS485_RTS_AFTER_SEND;
+ }
+ }
+
+ if (rs485->delay_rts_after_send) {
+ baud_clk = port->uartclk / up->dl_read(up);
+ rs485_dly_reg = DIV_ROUND_UP(rs485->delay_rts_after_send
+ * baud_clk, MSEC_PER_SEC);
+
+ if (rs485_dly_reg > LPC18XX_UART_RS485DLY_MAX)
+ rs485_dly_reg = LPC18XX_UART_RS485DLY_MAX;
+
+ /* Calculate the resulting delay in ms */
+ rs485->delay_rts_after_send = (rs485_dly_reg * MSEC_PER_SEC)
+ / baud_clk;
+ }
+
+ /* Delay RTS before send not supported */
+ rs485->delay_rts_before_send = 0;
+
+ serial_out(up, LPC18XX_UART_RS485CTRL, rs485_ctrl_reg);
+ serial_out(up, LPC18XX_UART_RS485DLY, rs485_dly_reg);
+
+ port->rs485 = *rs485;
+
+ return 0;
+}
+
+static void lpc18xx_uart_serial_out(struct uart_port *p, int offset, int value)
+{
+ /*
+ * For DMA mode one must ensure that the UART_FCR_DMA_SELECT
+ * bit is set when FIFO is enabled. Even if DMA is not used
+ * setting this bit doesn't seem to affect anything.
+ */
+ if (offset == UART_FCR && (value & UART_FCR_ENABLE_FIFO))
+ value |= UART_FCR_DMA_SELECT;
+
+ offset = offset << p->regshift;
+ writel(value, p->membase + offset);
+}
+
+static int lpc18xx_serial_probe(struct platform_device *pdev)
+{
+ struct lpc18xx_uart_data *data;
+ struct uart_8250_port uart;
+ struct resource *res;
+ int irq, ret;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "irq not found");
+ return irq;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "memory resource not found");
+ return -EINVAL;
+ }
+
+ memset(&uart, 0, sizeof(uart));
+
+ uart.port.membase = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (!uart.port.membase)
+ return -ENOMEM;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->clk_uart = devm_clk_get(&pdev->dev, "uartclk");
+ if (IS_ERR(data->clk_uart)) {
+ dev_err(&pdev->dev, "uart clock not found\n");
+ return PTR_ERR(data->clk_uart);
+ }
+
+ data->clk_reg = devm_clk_get(&pdev->dev, "reg");
+ if (IS_ERR(data->clk_reg)) {
+ dev_err(&pdev->dev, "reg clock not found\n");
+ return PTR_ERR(data->clk_reg);
+ }
+
+ ret = clk_prepare_enable(data->clk_reg);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to enable reg clock\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(data->clk_uart);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to enable uart clock\n");
+ goto dis_clk_reg;
+ }
+
+ ret = of_alias_get_id(pdev->dev.of_node, "serial");
+ if (ret >= 0)
+ uart.port.line = ret;
+
+ data->dma.rx_param = data;
+ data->dma.tx_param = data;
+
+ spin_lock_init(&uart.port.lock);
+ uart.port.dev = &pdev->dev;
+ uart.port.irq = irq;
+ uart.port.iotype = UPIO_MEM32;
+ uart.port.mapbase = res->start;
+ uart.port.regshift = 2;
+ uart.port.type = PORT_16550A;
+ uart.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_SKIP_TEST;
+ uart.port.uartclk = clk_get_rate(data->clk_uart);
+ uart.port.private_data = data;
+ uart.port.rs485_config = lpc18xx_rs485_config;
+ uart.port.serial_out = lpc18xx_uart_serial_out;
+
+ uart.dma = &data->dma;
+ uart.dma->rxconf.src_maxburst = 1;
+ uart.dma->txconf.dst_maxburst = 1;
+
+ ret = serial8250_register_8250_port(&uart);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "unable to register 8250 port\n");
+ goto dis_uart_clk;
+ }
+
+ data->line = ret;
+ platform_set_drvdata(pdev, data);
+
+ return 0;
+
+dis_uart_clk:
+ clk_disable_unprepare(data->clk_uart);
+dis_clk_reg:
+ clk_disable_unprepare(data->clk_reg);
+ return ret;
+}
+
+static int lpc18xx_serial_remove(struct platform_device *pdev)
+{
+ struct lpc18xx_uart_data *data = platform_get_drvdata(pdev);
+
+ serial8250_unregister_port(data->line);
+ clk_disable_unprepare(data->clk_uart);
+ clk_disable_unprepare(data->clk_reg);
+
+ return 0;
+}
+
+static const struct of_device_id lpc18xx_serial_match[] = {
+ { .compatible = "nxp,lpc1850-uart" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_serial_match);
+
+static struct platform_driver lpc18xx_serial_driver = {
+ .probe = lpc18xx_serial_probe,
+ .remove = lpc18xx_serial_remove,
+ .driver = {
+ .name = "lpc18xx-uart",
+ .of_match_table = lpc18xx_serial_match,
+ },
+};
+module_platform_driver(lpc18xx_serial_driver);
+
+MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
+MODULE_DESCRIPTION("Serial port driver NXP LPC18xx/43xx devices");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/tty/serial/8250/8250_mid.c b/kernel/drivers/tty/serial/8250/8250_mid.c
new file mode 100644
index 000000000..88531a36b
--- /dev/null
+++ b/kernel/drivers/tty/serial/8250/8250_mid.c
@@ -0,0 +1,326 @@
+/*
+ * 8250_mid.c - Driver for UART on Intel Penwell and various other Intel SOCs
+ *
+ * Copyright (C) 2015 Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/rational.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include <linux/dma/hsu.h>
+
+#include "8250.h"
+
+#define PCI_DEVICE_ID_INTEL_PNW_UART1 0x081b
+#define PCI_DEVICE_ID_INTEL_PNW_UART2 0x081c
+#define PCI_DEVICE_ID_INTEL_PNW_UART3 0x081d
+#define PCI_DEVICE_ID_INTEL_TNG_UART 0x1191
+#define PCI_DEVICE_ID_INTEL_DNV_UART 0x19d8
+
+/* Intel MID Specific registers */
+#define INTEL_MID_UART_PS 0x30
+#define INTEL_MID_UART_MUL 0x34
+#define INTEL_MID_UART_DIV 0x38
+
+struct mid8250;
+
+struct mid8250_board {
+ unsigned long freq;
+ unsigned int base_baud;
+ int (*setup)(struct mid8250 *, struct uart_port *p);
+ void (*exit)(struct mid8250 *);
+};
+
+struct mid8250 {
+ int line;
+ int dma_index;
+ struct pci_dev *dma_dev;
+ struct uart_8250_dma dma;
+ struct mid8250_board *board;
+ struct hsu_dma_chip dma_chip;
+};
+
+/*****************************************************************************/
+
+static int pnw_setup(struct mid8250 *mid, struct uart_port *p)
+{
+ struct pci_dev *pdev = to_pci_dev(p->dev);
+
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_INTEL_PNW_UART1:
+ mid->dma_index = 0;
+ break;
+ case PCI_DEVICE_ID_INTEL_PNW_UART2:
+ mid->dma_index = 1;
+ break;
+ case PCI_DEVICE_ID_INTEL_PNW_UART3:
+ mid->dma_index = 2;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ mid->dma_dev = pci_get_slot(pdev->bus,
+ PCI_DEVFN(PCI_SLOT(pdev->devfn), 3));
+ return 0;
+}
+
+static int tng_setup(struct mid8250 *mid, struct uart_port *p)
+{
+ struct pci_dev *pdev = to_pci_dev(p->dev);
+ int index = PCI_FUNC(pdev->devfn);
+
+ /* Currently no support for HSU port0 */
+ if (index-- == 0)
+ return -ENODEV;
+
+ mid->dma_index = index;
+ mid->dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(5, 0));
+ return 0;
+}
+
+static int dnv_handle_irq(struct uart_port *p)
+{
+ struct mid8250 *mid = p->private_data;
+ int ret;
+
+ ret = hsu_dma_irq(&mid->dma_chip, 0);
+ ret |= hsu_dma_irq(&mid->dma_chip, 1);
+
+ /* For now, letting the HW generate separate interrupt for the UART */
+ if (ret)
+ return ret;
+
+ return serial8250_handle_irq(p, serial_port_in(p, UART_IIR));
+}
+
+#define DNV_DMA_CHAN_OFFSET 0x80
+
+static int dnv_setup(struct mid8250 *mid, struct uart_port *p)
+{
+ struct hsu_dma_chip *chip = &mid->dma_chip;
+ struct pci_dev *pdev = to_pci_dev(p->dev);
+ int ret;
+
+ chip->dev = &pdev->dev;
+ chip->irq = pdev->irq;
+ chip->regs = p->membase;
+ chip->length = pci_resource_len(pdev, 0);
+ chip->offset = DNV_DMA_CHAN_OFFSET;
+
+ /* Falling back to PIO mode if DMA probing fails */
+ ret = hsu_dma_probe(chip);
+ if (ret)
+ return 0;
+
+ mid->dma_dev = pdev;
+
+ p->handle_irq = dnv_handle_irq;
+ return 0;
+}
+
+static void dnv_exit(struct mid8250 *mid)
+{
+ if (!mid->dma_dev)
+ return;
+ hsu_dma_remove(&mid->dma_chip);
+}
+
+/*****************************************************************************/
+
+static void mid8250_set_termios(struct uart_port *p,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned int baud = tty_termios_baud_rate(termios);
+ struct mid8250 *mid = p->private_data;
+ unsigned short ps = 16;
+ unsigned long fuart = baud * ps;
+ unsigned long w = BIT(24) - 1;
+ unsigned long mul, div;
+
+ if (mid->board->freq < fuart) {
+ /* Find prescaler value that satisfies Fuart < Fref */
+ if (mid->board->freq > baud)
+ ps = mid->board->freq / baud; /* baud rate too high */
+ else
+ ps = 1; /* PLL case */
+ fuart = baud * ps;
+ } else {
+ /* Get Fuart closer to Fref */
+ fuart *= rounddown_pow_of_two(mid->board->freq / fuart);
+ }
+
+ rational_best_approximation(fuart, mid->board->freq, w, w, &mul, &div);
+ p->uartclk = fuart * 16 / ps; /* core uses ps = 16 always */
+
+ writel(ps, p->membase + INTEL_MID_UART_PS); /* set PS */
+ writel(mul, p->membase + INTEL_MID_UART_MUL); /* set MUL */
+ writel(div, p->membase + INTEL_MID_UART_DIV);
+
+ serial8250_do_set_termios(p, termios, old);
+}
+
+static bool mid8250_dma_filter(struct dma_chan *chan, void *param)
+{
+ struct hsu_dma_slave *s = param;
+
+ if (s->dma_dev != chan->device->dev || s->chan_id != chan->chan_id)
+ return false;
+
+ chan->private = s;
+ return true;
+}
+
+static int mid8250_dma_setup(struct mid8250 *mid, struct uart_8250_port *port)
+{
+ struct uart_8250_dma *dma = &mid->dma;
+ struct device *dev = port->port.dev;
+ struct hsu_dma_slave *rx_param;
+ struct hsu_dma_slave *tx_param;
+
+ if (!mid->dma_dev)
+ return 0;
+
+ rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL);
+ if (!rx_param)
+ return -ENOMEM;
+
+ tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL);
+ if (!tx_param)
+ return -ENOMEM;
+
+ rx_param->chan_id = mid->dma_index * 2 + 1;
+ tx_param->chan_id = mid->dma_index * 2;
+
+ dma->rxconf.src_maxburst = 64;
+ dma->txconf.dst_maxburst = 64;
+
+ rx_param->dma_dev = &mid->dma_dev->dev;
+ tx_param->dma_dev = &mid->dma_dev->dev;
+
+ dma->fn = mid8250_dma_filter;
+ dma->rx_param = rx_param;
+ dma->tx_param = tx_param;
+
+ port->dma = dma;
+ return 0;
+}
+
+static int mid8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct uart_8250_port uart;
+ struct mid8250 *mid;
+ int ret;
+
+ ret = pcim_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ pci_set_master(pdev);
+
+ mid = devm_kzalloc(&pdev->dev, sizeof(*mid), GFP_KERNEL);
+ if (!mid)
+ return -ENOMEM;
+
+ mid->board = (struct mid8250_board *)id->driver_data;
+
+ memset(&uart, 0, sizeof(struct uart_8250_port));
+
+ uart.port.dev = &pdev->dev;
+ uart.port.irq = pdev->irq;
+ uart.port.private_data = mid;
+ uart.port.type = PORT_16750;
+ uart.port.iotype = UPIO_MEM;
+ uart.port.uartclk = mid->board->base_baud * 16;
+ uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE;
+ uart.port.set_termios = mid8250_set_termios;
+
+ uart.port.mapbase = pci_resource_start(pdev, 0);
+ uart.port.membase = pcim_iomap(pdev, 0, 0);
+ if (!uart.port.membase)
+ return -ENOMEM;
+
+ if (mid->board->setup) {
+ ret = mid->board->setup(mid, &uart.port);
+ if (ret)
+ return ret;
+ }
+
+ ret = mid8250_dma_setup(mid, &uart);
+ if (ret)
+ goto err;
+
+ ret = serial8250_register_8250_port(&uart);
+ if (ret < 0)
+ goto err;
+
+ mid->line = ret;
+
+ pci_set_drvdata(pdev, mid);
+ return 0;
+err:
+ if (mid->board->exit)
+ mid->board->exit(mid);
+ return ret;
+}
+
+static void mid8250_remove(struct pci_dev *pdev)
+{
+ struct mid8250 *mid = pci_get_drvdata(pdev);
+
+ if (mid->board->exit)
+ mid->board->exit(mid);
+
+ serial8250_unregister_port(mid->line);
+}
+
+static const struct mid8250_board pnw_board = {
+ .freq = 50000000,
+ .base_baud = 115200,
+ .setup = pnw_setup,
+};
+
+static const struct mid8250_board tng_board = {
+ .freq = 38400000,
+ .base_baud = 1843200,
+ .setup = tng_setup,
+};
+
+static const struct mid8250_board dnv_board = {
+ .freq = 133333333,
+ .base_baud = 115200,
+ .setup = dnv_setup,
+ .exit = dnv_exit,
+};
+
+#define MID_DEVICE(id, board) { PCI_VDEVICE(INTEL, id), (kernel_ulong_t)&board }
+
+static const struct pci_device_id pci_ids[] = {
+ MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART1, pnw_board),
+ MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART2, pnw_board),
+ MID_DEVICE(PCI_DEVICE_ID_INTEL_PNW_UART3, pnw_board),
+ MID_DEVICE(PCI_DEVICE_ID_INTEL_TNG_UART, tng_board),
+ MID_DEVICE(PCI_DEVICE_ID_INTEL_DNV_UART, dnv_board),
+ { },
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+static struct pci_driver mid8250_pci_driver = {
+ .name = "8250_mid",
+ .id_table = pci_ids,
+ .probe = mid8250_probe,
+ .remove = mid8250_remove,
+};
+
+module_pci_driver(mid8250_pci_driver);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel MID UART driver");
diff --git a/kernel/drivers/tty/serial/8250/8250_mtk.c b/kernel/drivers/tty/serial/8250/8250_mtk.c
index 7a11fac77..78883ca64 100644
--- a/kernel/drivers/tty/serial/8250/8250_mtk.c
+++ b/kernel/drivers/tty/serial/8250/8250_mtk.c
@@ -34,6 +34,7 @@
struct mtk8250_data {
int line;
struct clk *uart_clk;
+ struct clk *bus_clk;
};
static void
@@ -115,6 +116,36 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
tty_termios_encode_baud_rate(termios, baud, baud);
}
+static int mtk8250_runtime_suspend(struct device *dev)
+{
+ struct mtk8250_data *data = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(data->uart_clk);
+ clk_disable_unprepare(data->bus_clk);
+
+ return 0;
+}
+
+static int mtk8250_runtime_resume(struct device *dev)
+{
+ struct mtk8250_data *data = dev_get_drvdata(dev);
+ int err;
+
+ err = clk_prepare_enable(data->uart_clk);
+ if (err) {
+ dev_warn(dev, "Can't enable clock\n");
+ return err;
+ }
+
+ err = clk_prepare_enable(data->bus_clk);
+ if (err) {
+ dev_warn(dev, "Can't enable bus clock\n");
+ return err;
+ }
+
+ return 0;
+}
+
static void
mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
{
@@ -130,22 +161,24 @@ mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
static int mtk8250_probe_of(struct platform_device *pdev, struct uart_port *p,
struct mtk8250_data *data)
{
- int err;
- struct device_node *np = pdev->dev.of_node;
-
- data->uart_clk = of_clk_get(np, 0);
+ data->uart_clk = devm_clk_get(&pdev->dev, "baud");
if (IS_ERR(data->uart_clk)) {
- dev_warn(&pdev->dev, "Can't get timer clock\n");
- return PTR_ERR(data->uart_clk);
+ /*
+ * For compatibility with older device trees try unnamed
+ * clk when no baud clk can be found.
+ */
+ data->uart_clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(data->uart_clk)) {
+ dev_warn(&pdev->dev, "Can't get uart clock\n");
+ return PTR_ERR(data->uart_clk);
+ }
+
+ return 0;
}
- err = clk_prepare_enable(data->uart_clk);
- if (err) {
- dev_warn(&pdev->dev, "Can't prepare clock\n");
- clk_put(data->uart_clk);
- return err;
- }
- p->uartclk = clk_get_rate(data->uart_clk);
+ data->bus_clk = devm_clk_get(&pdev->dev, "bus");
+ if (IS_ERR(data->bus_clk))
+ return PTR_ERR(data->bus_clk);
return 0;
}
@@ -190,19 +223,24 @@ static int mtk8250_probe(struct platform_device *pdev)
uart.port.regshift = 2;
uart.port.private_data = data;
uart.port.set_termios = mtk8250_set_termios;
+ uart.port.uartclk = clk_get_rate(data->uart_clk);
/* Disable Rate Fix function */
writel(0x0, uart.port.membase +
(MTK_UART_RATE_FIX << uart.port.regshift));
- data->line = serial8250_register_8250_port(&uart);
- if (data->line < 0)
- return data->line;
-
platform_set_drvdata(pdev, data);
- pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
+ if (!pm_runtime_enabled(&pdev->dev)) {
+ err = mtk8250_runtime_resume(&pdev->dev);
+ if (err)
+ return err;
+ }
+
+ data->line = serial8250_register_8250_port(&uart);
+ if (data->line < 0)
+ return data->line;
return 0;
}
@@ -214,13 +252,13 @@ static int mtk8250_remove(struct platform_device *pdev)
pm_runtime_get_sync(&pdev->dev);
serial8250_unregister_port(data->line);
- if (!IS_ERR(data->uart_clk)) {
- clk_disable_unprepare(data->uart_clk);
- clk_put(data->uart_clk);
- }
pm_runtime_disable(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
+
+ if (!pm_runtime_status_suspended(&pdev->dev))
+ mtk8250_runtime_suspend(&pdev->dev);
+
return 0;
}
@@ -244,28 +282,6 @@ static int mtk8250_resume(struct device *dev)
}
#endif /* CONFIG_PM_SLEEP */
-#ifdef CONFIG_PM
-static int mtk8250_runtime_suspend(struct device *dev)
-{
- struct mtk8250_data *data = dev_get_drvdata(dev);
-
- if (!IS_ERR(data->uart_clk))
- clk_disable_unprepare(data->uart_clk);
-
- return 0;
-}
-
-static int mtk8250_runtime_resume(struct device *dev)
-{
- struct mtk8250_data *data = dev_get_drvdata(dev);
-
- if (!IS_ERR(data->uart_clk))
- clk_prepare_enable(data->uart_clk);
-
- return 0;
-}
-#endif
-
static const struct dev_pm_ops mtk8250_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(mtk8250_suspend, mtk8250_resume)
SET_RUNTIME_PM_OPS(mtk8250_runtime_suspend, mtk8250_runtime_resume,
@@ -289,6 +305,21 @@ static struct platform_driver mtk8250_platform_driver = {
};
module_platform_driver(mtk8250_platform_driver);
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init early_mtk8250_setup(struct earlycon_device *device,
+ const char *options)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->port.iotype = UPIO_MEM32;
+
+ return early_serial8250_setup(device, NULL);
+}
+
+OF_EARLYCON_DECLARE(mtk8250, "mediatek,mt6577-uart", early_mtk8250_setup);
+#endif
+
MODULE_AUTHOR("Matthias Brugger");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Mediatek 8250 serial port driver");
diff --git a/kernel/drivers/tty/serial/8250/8250_omap.c b/kernel/drivers/tty/serial/8250/8250_omap.c
index dce1a2370..a2c0734c7 100644
--- a/kernel/drivers/tty/serial/8250/8250_omap.c
+++ b/kernel/drivers/tty/serial/8250/8250_omap.c
@@ -16,12 +16,14 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/of_irq.h>
#include <linux/delay.h>
#include <linux/pm_runtime.h>
#include <linux/console.h>
#include <linux/pm_qos.h>
+#include <linux/pm_wakeirq.h>
#include <linux/dma-mapping.h>
#include "8250.h"
@@ -31,6 +33,11 @@
#define UART_ERRATA_i202_MDR1_ACCESS (1 << 0)
#define OMAP_UART_WER_HAS_TX_WAKEUP (1 << 1)
#define OMAP_DMA_TX_KICK (1 << 2)
+/*
+ * See Advisory 21 in AM437x errata SPRZ408B, updated April 2015.
+ * The same errata is applicable to AM335x and DRA7x processors too.
+ */
+#define UART_ERRATA_CLOCK_DISABLE (1 << 3)
#define OMAP_UART_FCR_RX_TRIG 6
#define OMAP_UART_FCR_TX_TRIG 4
@@ -52,6 +59,12 @@
#define OMAP_UART_MVR_MAJ_SHIFT 8
#define OMAP_UART_MVR_MIN_MASK 0x3f
+/* SYSC register bitmasks */
+#define OMAP_UART_SYSC_SOFTRESET (1 << 1)
+
+/* SYSS register bitmasks */
+#define OMAP_UART_SYSS_RESETDONE (1 << 0)
+
#define UART_TI752_TLR_TX 0
#define UART_TI752_TLR_RX 4
@@ -98,6 +111,8 @@ struct omap8250_priv {
struct pm_qos_request pm_qos_request;
struct work_struct qos_work;
struct uart_8250_dma omap8250_dma;
+ spinlock_t rx_dma_lock;
+ bool rx_dma_broken;
};
static u32 uart_read(struct uart_8250_port *up, u32 reg)
@@ -230,6 +245,15 @@ static void omap8250_update_scr(struct uart_8250_port *up,
serial_out(up, UART_OMAP_SCR, priv->scr);
}
+static void omap8250_update_mdr1(struct uart_8250_port *up,
+ struct omap8250_priv *priv)
+{
+ if (priv->habit & UART_ERRATA_i202_MDR1_ACCESS)
+ omap_8250_mdr1_errataset(up, priv);
+ else
+ serial_out(up, UART_OMAP_MDR1, priv->mdr1);
+}
+
static void omap8250_restore_regs(struct uart_8250_port *up)
{
struct omap8250_priv *priv = up->port.private_data;
@@ -280,11 +304,9 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
serial_out(up, UART_XOFF1, priv->xoff);
serial_out(up, UART_LCR, up->lcr);
- /* need mode A for FCR */
- if (priv->habit & UART_ERRATA_i202_MDR1_ACCESS)
- omap_8250_mdr1_errataset(up, priv);
- else
- serial_out(up, UART_OMAP_MDR1, priv->mdr1);
+
+ omap8250_update_mdr1(up, priv);
+
up->port.ops->set_mctrl(&up->port, up->port.mctrl);
}
@@ -417,7 +439,6 @@ static void omap_8250_set_termios(struct uart_port *port,
priv->xoff = termios->c_cc[VSTOP];
priv->efr = 0;
- up->mcr &= ~(UART_MCR_RTS | UART_MCR_XONANY);
up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF);
if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW) {
@@ -426,12 +447,9 @@ static void omap_8250_set_termios(struct uart_port *port,
priv->efr |= UART_EFR_CTS;
} else if (up->port.flags & UPF_SOFT_FLOW) {
/*
- * IXON Flag:
- * Enable XON/XOFF flow control on input.
- * Receiver compares XON1, XOFF1.
+ * OMAP rx s/w flow control is borked; the transmitter remains
+ * stuck off even if rx flow control is subsequently disabled
*/
- if (termios->c_iflag & IXON)
- priv->efr |= OMAP_UART_SW_RX;
/*
* IXOFF Flag:
@@ -442,15 +460,6 @@ static void omap_8250_set_termios(struct uart_port *port,
up->port.status |= UPSTAT_AUTOXOFF;
priv->efr |= OMAP_UART_SW_TX;
}
-
- /*
- * IXANY Flag:
- * Enable any character to restart output.
- * Operation resumes after receiving any
- * character after recognition of the XOFF character
- */
- if (termios->c_iflag & IXANY)
- up->mcr |= UART_MCR_XONANY;
}
omap8250_restore_regs(up);
@@ -528,14 +537,14 @@ static void omap_serial_fill_features_erratas(struct uart_8250_port *up,
switch (revision) {
case OMAP_UART_REV_46:
- priv->habit = UART_ERRATA_i202_MDR1_ACCESS;
+ priv->habit |= UART_ERRATA_i202_MDR1_ACCESS;
break;
case OMAP_UART_REV_52:
- priv->habit = UART_ERRATA_i202_MDR1_ACCESS |
+ priv->habit |= UART_ERRATA_i202_MDR1_ACCESS |
OMAP_UART_WER_HAS_TX_WAKEUP;
break;
case OMAP_UART_REV_63:
- priv->habit = UART_ERRATA_i202_MDR1_ACCESS |
+ priv->habit |= UART_ERRATA_i202_MDR1_ACCESS |
OMAP_UART_WER_HAS_TX_WAKEUP;
break;
default:
@@ -551,17 +560,6 @@ static void omap8250_uart_qos_work(struct work_struct *work)
pm_qos_update_request(&priv->pm_qos_request, priv->latency);
}
-static irqreturn_t omap_wake_irq(int irq, void *dev_id)
-{
- struct uart_port *port = dev_id;
- int ret;
-
- ret = port->handle_irq(port);
- if (ret)
- return IRQ_HANDLED;
- return IRQ_NONE;
-}
-
#ifdef CONFIG_SERIAL_8250_DMA
static int omap_8250_dma_handle_irq(struct uart_port *port);
#endif
@@ -595,11 +593,9 @@ static int omap_8250_startup(struct uart_port *port)
int ret;
if (priv->wakeirq) {
- ret = request_irq(priv->wakeirq, omap_wake_irq,
- port->irqflags, "uart wakeup irq", port);
+ ret = dev_pm_set_dedicated_wake_irq(port->dev, priv->wakeirq);
if (ret)
return ret;
- disable_irq(priv->wakeirq);
}
pm_runtime_get_sync(port->dev);
@@ -648,8 +644,7 @@ static int omap_8250_startup(struct uart_port *port)
err:
pm_runtime_mark_last_busy(port->dev);
pm_runtime_put_autosuspend(port->dev);
- if (priv->wakeirq)
- free_irq(priv->wakeirq, port);
+ dev_pm_clear_wake_irq(port->dev);
return ret;
}
@@ -681,10 +676,8 @@ static void omap_8250_shutdown(struct uart_port *port)
pm_runtime_mark_last_busy(port->dev);
pm_runtime_put_autosuspend(port->dev);
-
free_irq(port->irq, port);
- if (priv->wakeirq)
- free_irq(priv->wakeirq, port);
+ dev_pm_clear_wake_irq(port->dev);
}
static void omap_8250_throttle(struct uart_port *port)
@@ -726,22 +719,35 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir);
static void __dma_rx_do_complete(struct uart_8250_port *p, bool error)
{
+ struct omap8250_priv *priv = p->port.private_data;
struct uart_8250_dma *dma = p->dma;
struct tty_port *tty_port = &p->port.state->port;
struct dma_tx_state state;
int count;
+ unsigned long flags;
+ int ret;
dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr,
dma->rx_size, DMA_FROM_DEVICE);
+ spin_lock_irqsave(&priv->rx_dma_lock, flags);
+
+ if (!dma->rx_running)
+ goto unlock;
+
dma->rx_running = 0;
dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state);
dmaengine_terminate_all(dma->rxchan);
count = dma->rx_size - state.residue;
- tty_insert_flip_string(tty_port, dma->rx_buf, count);
- p->port.icount.rx += count;
+ ret = tty_insert_flip_string(tty_port, dma->rx_buf, count);
+
+ p->port.icount.rx += ret;
+ p->port.icount.buf_overrun += count - ret;
+unlock:
+ spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
+
if (!error)
omap_8250_rx_dma(p, 0);
@@ -753,28 +759,48 @@ static void __dma_rx_complete(void *param)
__dma_rx_do_complete(param, false);
}
+static void omap_8250_rx_dma_flush(struct uart_8250_port *p)
+{
+ struct omap8250_priv *priv = p->port.private_data;
+ struct uart_8250_dma *dma = p->dma;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&priv->rx_dma_lock, flags);
+
+ if (!dma->rx_running) {
+ spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
+ return;
+ }
+
+ ret = dmaengine_pause(dma->rxchan);
+ if (WARN_ON_ONCE(ret))
+ priv->rx_dma_broken = true;
+
+ spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
+
+ __dma_rx_do_complete(p, true);
+}
+
static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
{
+ struct omap8250_priv *priv = p->port.private_data;
struct uart_8250_dma *dma = p->dma;
+ int err = 0;
struct dma_async_tx_descriptor *desc;
+ unsigned long flags;
switch (iir & 0x3f) {
case UART_IIR_RLSI:
/* 8250_core handles errors and break interrupts */
- if (dma->rx_running) {
- dmaengine_pause(dma->rxchan);
- __dma_rx_do_complete(p, true);
- }
+ omap_8250_rx_dma_flush(p);
return -EIO;
case UART_IIR_RX_TIMEOUT:
/*
* If RCVR FIFO trigger level was not reached, complete the
* transfer and let 8250_core copy the remaining data.
*/
- if (dma->rx_running) {
- dmaengine_pause(dma->rxchan);
- __dma_rx_do_complete(p, true);
- }
+ omap_8250_rx_dma_flush(p);
return -ETIMEDOUT;
case UART_IIR_RDI:
/*
@@ -786,24 +812,28 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
* the DMA won't do anything soon so we have to cancel the DMA
* transfer and purge the FIFO manually.
*/
- if (dma->rx_running) {
- dmaengine_pause(dma->rxchan);
- __dma_rx_do_complete(p, true);
- }
+ omap_8250_rx_dma_flush(p);
return -ETIMEDOUT;
default:
break;
}
+ if (priv->rx_dma_broken)
+ return -EINVAL;
+
+ spin_lock_irqsave(&priv->rx_dma_lock, flags);
+
if (dma->rx_running)
- return 0;
+ goto out;
desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr,
dma->rx_size, DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc)
- return -EBUSY;
+ if (!desc) {
+ err = -EBUSY;
+ goto out;
+ }
dma->rx_running = 1;
desc->callback = __dma_rx_complete;
@@ -815,7 +845,9 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir)
dma->rx_size, DMA_FROM_DEVICE);
dma_async_issue_pending(dma->rxchan);
- return 0;
+out:
+ spin_unlock_irqrestore(&priv->rx_dma_lock, flags);
+ return err;
}
static int omap_8250_tx_dma(struct uart_8250_port *p);
@@ -1038,6 +1070,20 @@ static int omap8250_no_handle_irq(struct uart_port *port)
return 0;
}
+static const u8 am3352_habit = OMAP_DMA_TX_KICK | UART_ERRATA_CLOCK_DISABLE;
+static const u8 am4372_habit = UART_ERRATA_CLOCK_DISABLE;
+
+static const struct of_device_id omap8250_dt_ids[] = {
+ { .compatible = "ti,omap2-uart" },
+ { .compatible = "ti,omap3-uart" },
+ { .compatible = "ti,omap4-uart" },
+ { .compatible = "ti,am3352-uart", .data = &am3352_habit, },
+ { .compatible = "ti,am4372-uart", .data = &am4372_habit, },
+ { .compatible = "ti,dra742-uart", .data = &am4372_habit, },
+ {},
+};
+MODULE_DEVICE_TABLE(of, omap8250_dt_ids);
+
static int omap8250_probe(struct platform_device *pdev)
{
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1102,11 +1148,17 @@ static int omap8250_probe(struct platform_device *pdev)
up.port.unthrottle = omap_8250_unthrottle;
if (pdev->dev.of_node) {
+ const struct of_device_id *id;
+
ret = of_alias_get_id(pdev->dev.of_node, "serial");
of_property_read_u32(pdev->dev.of_node, "clock-frequency",
&up.port.uartclk);
priv->wakeirq = irq_of_parse_and_map(pdev->dev.of_node, 1);
+
+ id = of_match_device(of_match_ptr(omap8250_dt_ids), &pdev->dev);
+ if (id && id->data)
+ priv->habit |= *(u8 *)id->data;
} else {
ret = pdev->id;
}
@@ -1129,6 +1181,8 @@ static int omap8250_probe(struct platform_device *pdev)
priv->latency);
INIT_WORK(&priv->qos_work, omap8250_uart_qos_work);
+ spin_lock_init(&priv->rx_dma_lock);
+
device_init_wakeup(&pdev->dev, true);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, -1);
@@ -1162,6 +1216,11 @@ static int omap8250_probe(struct platform_device *pdev)
if (of_machine_is_compatible("ti,am33xx"))
priv->habit |= OMAP_DMA_TX_KICK;
+ /*
+ * pause is currently not supported atleast on omap-sdma
+ * and edma on most earlier kernels.
+ */
+ priv->rx_dma_broken = true;
}
}
#endif
@@ -1193,31 +1252,6 @@ static int omap8250_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM
-
-static inline void omap8250_enable_wakeirq(struct omap8250_priv *priv,
- bool enable)
-{
- if (!priv->wakeirq)
- return;
-
- if (enable)
- enable_irq(priv->wakeirq);
- else
- disable_irq_nosync(priv->wakeirq);
-}
-
-static void omap8250_enable_wakeup(struct omap8250_priv *priv,
- bool enable)
-{
- if (enable == priv->wakeups_enabled)
- return;
-
- omap8250_enable_wakeirq(priv, enable);
- priv->wakeups_enabled = enable;
-}
-#endif
-
#ifdef CONFIG_PM_SLEEP
static int omap8250_prepare(struct device *dev)
{
@@ -1244,11 +1278,6 @@ static int omap8250_suspend(struct device *dev)
serial8250_suspend_port(priv->line);
flush_work(&priv->qos_work);
-
- if (device_may_wakeup(dev))
- omap8250_enable_wakeup(priv, true);
- else
- omap8250_enable_wakeup(priv, false);
return 0;
}
@@ -1256,9 +1285,6 @@ static int omap8250_resume(struct device *dev)
{
struct omap8250_priv *priv = dev_get_drvdata(dev);
- if (device_may_wakeup(dev))
- omap8250_enable_wakeup(priv, false);
-
serial8250_resume_port(priv->line);
return 0;
}
@@ -1272,17 +1298,46 @@ static int omap8250_lost_context(struct uart_8250_port *up)
{
u32 val;
- val = serial_in(up, UART_OMAP_MDR1);
+ val = serial_in(up, UART_OMAP_SCR);
/*
- * If we lose context, then MDR1 is set to its reset value which is
- * UART_OMAP_MDR1_DISABLE. After set_termios() we set it either to 13x
- * or 16x but never to disable again.
+ * If we lose context, then SCR is set to its reset value of zero.
+ * After set_termios() we set bit 3 of SCR (TX_EMPTY_CTL_IT) to 1,
+ * among other bits, to never set the register back to zero again.
*/
- if (val == UART_OMAP_MDR1_DISABLE)
+ if (!val)
return 1;
return 0;
}
+/* TODO: in future, this should happen via API in drivers/reset/ */
+static int omap8250_soft_reset(struct device *dev)
+{
+ struct omap8250_priv *priv = dev_get_drvdata(dev);
+ struct uart_8250_port *up = serial8250_get_port(priv->line);
+ int timeout = 100;
+ int sysc;
+ int syss;
+
+ sysc = serial_in(up, UART_OMAP_SYSC);
+
+ /* softreset the UART */
+ sysc |= OMAP_UART_SYSC_SOFTRESET;
+ serial_out(up, UART_OMAP_SYSC, sysc);
+
+ /* By experiments, 1us enough for reset complete on AM335x */
+ do {
+ udelay(1);
+ syss = serial_in(up, UART_OMAP_SYSS);
+ } while (--timeout && !(syss & OMAP_UART_SYSS_RESETDONE));
+
+ if (!timeout) {
+ dev_err(dev, "timed out waiting for reset done\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
static int omap8250_runtime_suspend(struct device *dev)
{
struct omap8250_priv *priv = dev_get_drvdata(dev);
@@ -1300,8 +1355,18 @@ static int omap8250_runtime_suspend(struct device *dev)
return -EBUSY;
}
- omap8250_enable_wakeup(priv, true);
- if (up->dma)
+ if (priv->habit & UART_ERRATA_CLOCK_DISABLE) {
+ int ret;
+
+ ret = omap8250_soft_reset(dev);
+ if (ret)
+ return ret;
+
+ /* Restore to UART mode after reset (for wakeup) */
+ omap8250_update_mdr1(up, priv);
+ }
+
+ if (up->dma && up->dma->rxchan)
omap_8250_rx_dma(up, UART_IIR_RX_TIMEOUT);
priv->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
@@ -1321,13 +1386,12 @@ static int omap8250_runtime_resume(struct device *dev)
return 0;
up = serial8250_get_port(priv->line);
- omap8250_enable_wakeup(priv, false);
loss_cntx = omap8250_lost_context(up);
if (loss_cntx)
omap8250_restore_regs(up);
- if (up->dma)
+ if (up->dma && up->dma->rxchan)
omap_8250_rx_dma(up, 0);
priv->latency = priv->calc_latency;
@@ -1384,14 +1448,6 @@ static const struct dev_pm_ops omap8250_dev_pm_ops = {
.complete = omap8250_complete,
};
-static const struct of_device_id omap8250_dt_ids[] = {
- { .compatible = "ti,omap2-uart" },
- { .compatible = "ti,omap3-uart" },
- { .compatible = "ti,omap4-uart" },
- {},
-};
-MODULE_DEVICE_TABLE(of, omap8250_dt_ids);
-
static struct platform_driver omap8250_platform_driver = {
.driver = {
.name = "omap8250",
diff --git a/kernel/drivers/tty/serial/8250/8250_pci.c b/kernel/drivers/tty/serial/8250/8250_pci.c
index 9373cca12..7cd6f9a90 100644
--- a/kernel/drivers/tty/serial/8250/8250_pci.c
+++ b/kernel/drivers/tty/serial/8250/8250_pci.c
@@ -28,7 +28,6 @@
#include <linux/dmaengine.h>
#include <linux/platform_data/dma-dw.h>
-#include <linux/platform_data/dma-hsu.h>
#include "8250.h"
@@ -1380,6 +1379,9 @@ ce4100_serial_setup(struct serial_private *priv,
#define PCI_DEVICE_ID_INTEL_BSW_UART1 0x228a
#define PCI_DEVICE_ID_INTEL_BSW_UART2 0x228c
+#define PCI_DEVICE_ID_INTEL_BDW_UART1 0x9ce3
+#define PCI_DEVICE_ID_INTEL_BDW_UART2 0x9ce4
+
#define BYT_PRV_CLK 0x800
#define BYT_PRV_CLK_EN (1 << 0)
#define BYT_PRV_CLK_M_VAL_SHIFT 1
@@ -1417,6 +1419,10 @@ byt_set_termios(struct uart_port *p, struct ktermios *termios,
reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE;
writel(reg, p->membase + BYT_PRV_CLK);
+ p->status &= ~UPSTAT_AUTOCTS;
+ if (termios->c_cflag & CRTSCTS)
+ p->status |= UPSTAT_AUTOCTS;
+
serial8250_do_set_termios(p, termios, old);
}
@@ -1458,11 +1464,13 @@ byt_serial_setup(struct serial_private *priv,
switch (pdev->device) {
case PCI_DEVICE_ID_INTEL_BYT_UART1:
case PCI_DEVICE_ID_INTEL_BSW_UART1:
+ case PCI_DEVICE_ID_INTEL_BDW_UART1:
rx_param->src_id = 3;
tx_param->dst_id = 2;
break;
case PCI_DEVICE_ID_INTEL_BYT_UART2:
case PCI_DEVICE_ID_INTEL_BSW_UART2:
+ case PCI_DEVICE_ID_INTEL_BDW_UART2:
rx_param->src_id = 5;
tx_param->dst_id = 4;
break;
@@ -1504,185 +1512,77 @@ byt_serial_setup(struct serial_private *priv,
return ret;
}
-#define INTEL_MID_UART_PS 0x30
-#define INTEL_MID_UART_MUL 0x34
-#define INTEL_MID_UART_DIV 0x38
-
-static void intel_mid_set_termios(struct uart_port *p,
- struct ktermios *termios,
- struct ktermios *old,
- unsigned long fref)
+static int
+pci_omegapci_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
{
- unsigned int baud = tty_termios_baud_rate(termios);
- unsigned short ps = 16;
- unsigned long fuart = baud * ps;
- unsigned long w = BIT(24) - 1;
- unsigned long mul, div;
-
- if (fref < fuart) {
- /* Find prescaler value that satisfies Fuart < Fref */
- if (fref > baud)
- ps = fref / baud; /* baud rate too high */
- else
- ps = 1; /* PLL case */
- fuart = baud * ps;
- } else {
- /* Get Fuart closer to Fref */
- fuart *= rounddown_pow_of_two(fref / fuart);
- }
-
- rational_best_approximation(fuart, fref, w, w, &mul, &div);
- p->uartclk = fuart * 16 / ps; /* core uses ps = 16 always */
-
- writel(ps, p->membase + INTEL_MID_UART_PS); /* set PS */
- writel(mul, p->membase + INTEL_MID_UART_MUL); /* set MUL */
- writel(div, p->membase + INTEL_MID_UART_DIV);
-
- serial8250_do_set_termios(p, termios, old);
+ return setup_port(priv, port, 2, idx * 8, 0);
}
-static void intel_mid_set_termios_38_4M(struct uart_port *p,
- struct ktermios *termios,
- struct ktermios *old)
+static int
+pci_brcm_trumanage_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
{
- intel_mid_set_termios(p, termios, old, 38400000);
-}
+ int ret = pci_default_setup(priv, board, port, idx);
-static void intel_mid_set_termios_50M(struct uart_port *p,
- struct ktermios *termios,
- struct ktermios *old)
-{
- /*
- * The uart clk is 50Mhz, and the baud rate come from:
- * baud = 50M * MUL / (DIV * PS * DLAB)
- */
- intel_mid_set_termios(p, termios, old, 50000000);
+ port->port.type = PORT_BRCM_TRUMANAGE;
+ port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
+ return ret;
}
-static bool intel_mid_dma_filter(struct dma_chan *chan, void *param)
-{
- struct hsu_dma_slave *s = param;
-
- if (s->dma_dev != chan->device->dev || s->chan_id != chan->chan_id)
- return false;
-
- chan->private = s;
- return true;
-}
+/* RTS will control by MCR if this bit is 0 */
+#define FINTEK_RTS_CONTROL_BY_HW BIT(4)
+/* only worked with FINTEK_RTS_CONTROL_BY_HW on */
+#define FINTEK_RTS_INVERT BIT(5)
-static int intel_mid_serial_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *port, int idx,
- int index, struct pci_dev *dma_dev)
+/* We should do proper H/W transceiver setting before change to RS485 mode */
+static int pci_fintek_rs485_config(struct uart_port *port,
+ struct serial_rs485 *rs485)
{
- struct device *dev = port->port.dev;
- struct uart_8250_dma *dma;
- struct hsu_dma_slave *tx_param, *rx_param;
-
- dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
- if (!dma)
- return -ENOMEM;
-
- tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL);
- if (!tx_param)
- return -ENOMEM;
+ u8 setting;
+ u8 *index = (u8 *) port->private_data;
+ struct pci_dev *pci_dev = container_of(port->dev, struct pci_dev,
+ dev);
- rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL);
- if (!rx_param)
- return -ENOMEM;
+ pci_read_config_byte(pci_dev, 0x40 + 8 * *index + 7, &setting);
- rx_param->chan_id = index * 2 + 1;
- tx_param->chan_id = index * 2;
-
- dma->rxconf.src_maxburst = 64;
- dma->txconf.dst_maxburst = 64;
-
- rx_param->dma_dev = &dma_dev->dev;
- tx_param->dma_dev = &dma_dev->dev;
-
- dma->fn = intel_mid_dma_filter;
- dma->rx_param = rx_param;
- dma->tx_param = tx_param;
-
- port->port.type = PORT_16750;
- port->port.flags |= UPF_FIXED_PORT | UPF_FIXED_TYPE;
- port->dma = dma;
+ if (!rs485)
+ rs485 = &port->rs485;
+ else if (rs485->flags & SER_RS485_ENABLED)
+ memset(rs485->padding, 0, sizeof(rs485->padding));
+ else
+ memset(rs485, 0, sizeof(*rs485));
- return pci_default_setup(priv, board, port, idx);
-}
+ /* F81504/508/512 not support RTS delay before or after send */
+ rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND;
-#define PCI_DEVICE_ID_INTEL_PNW_UART1 0x081b
-#define PCI_DEVICE_ID_INTEL_PNW_UART2 0x081c
-#define PCI_DEVICE_ID_INTEL_PNW_UART3 0x081d
+ if (rs485->flags & SER_RS485_ENABLED) {
+ /* Enable RTS H/W control mode */
+ setting |= FINTEK_RTS_CONTROL_BY_HW;
-static int pnw_serial_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *port, int idx)
-{
- struct pci_dev *pdev = priv->dev;
- struct pci_dev *dma_dev;
- int index;
+ if (rs485->flags & SER_RS485_RTS_ON_SEND) {
+ /* RTS driving high on TX */
+ setting &= ~FINTEK_RTS_INVERT;
+ } else {
+ /* RTS driving low on TX */
+ setting |= FINTEK_RTS_INVERT;
+ }
- switch (pdev->device) {
- case PCI_DEVICE_ID_INTEL_PNW_UART1:
- index = 0;
- break;
- case PCI_DEVICE_ID_INTEL_PNW_UART2:
- index = 1;
- break;
- case PCI_DEVICE_ID_INTEL_PNW_UART3:
- index = 2;
- break;
- default:
- return -EINVAL;
+ rs485->delay_rts_after_send = 0;
+ rs485->delay_rts_before_send = 0;
+ } else {
+ /* Disable RTS H/W control mode */
+ setting &= ~(FINTEK_RTS_CONTROL_BY_HW | FINTEK_RTS_INVERT);
}
- dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 3));
-
- port->port.set_termios = intel_mid_set_termios_50M;
+ pci_write_config_byte(pci_dev, 0x40 + 8 * *index + 7, setting);
- return intel_mid_serial_setup(priv, board, port, idx, index, dma_dev);
-}
-
-#define PCI_DEVICE_ID_INTEL_TNG_UART 0x1191
-
-static int tng_serial_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *port, int idx)
-{
- struct pci_dev *pdev = priv->dev;
- struct pci_dev *dma_dev;
- int index = PCI_FUNC(pdev->devfn);
-
- /* Currently no support for HSU port0 */
- if (index-- == 0)
- return -ENODEV;
-
- dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(5, 0));
-
- port->port.set_termios = intel_mid_set_termios_38_4M;
+ if (rs485 != &port->rs485)
+ port->rs485 = *rs485;
- return intel_mid_serial_setup(priv, board, port, idx, index, dma_dev);
-}
-
-static int
-pci_omegapci_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *port, int idx)
-{
- return setup_port(priv, port, 2, idx * 8, 0);
-}
-
-static int
-pci_brcm_trumanage_setup(struct serial_private *priv,
- const struct pciserial_board *board,
- struct uart_8250_port *port, int idx)
-{
- int ret = pci_default_setup(priv, board, port, idx);
-
- port->port.type = PORT_BRCM_TRUMANAGE;
- port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
- return ret;
+ return 0;
}
static int pci_fintek_setup(struct serial_private *priv,
@@ -1690,6 +1590,7 @@ static int pci_fintek_setup(struct serial_private *priv,
struct uart_8250_port *port, int idx)
{
struct pci_dev *pdev = priv->dev;
+ u8 *data;
u8 config_base;
u16 iobase;
@@ -1702,6 +1603,15 @@ static int pci_fintek_setup(struct serial_private *priv,
port->port.iotype = UPIO_PORT;
port->port.iobase = iobase;
+ port->port.rs485_config = pci_fintek_rs485_config;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(u8), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ /* preserve index in PCI configuration space */
+ *data = idx;
+ port->port.private_data = data;
return 0;
}
@@ -1712,6 +1622,8 @@ static int pci_fintek_init(struct pci_dev *dev)
u32 max_port, i;
u32 bar_data[3];
u8 config_base;
+ struct serial_private *priv = pci_get_drvdata(dev);
+ struct uart_8250_port *port;
switch (dev->device) {
case 0x1104: /* 4 ports */
@@ -1752,6 +1664,19 @@ static int pci_fintek_init(struct pci_dev *dev)
(u8)((iobase & 0xff00) >> 8));
pci_write_config_byte(dev, config_base + 0x06, dev->irq);
+
+ if (priv) {
+ /* re-apply RS232/485 mode when
+ * pciserial_resume_ports()
+ */
+ port = serial8250_get_port(priv->line[i]);
+ pci_fintek_rs485_config(&port->port, NULL);
+ } else {
+ /* First init without port data
+ * force init to RS232 Mode
+ */
+ pci_write_config_byte(dev, config_base + 0x07, 0x01);
+ }
}
return max_port;
@@ -1823,6 +1748,9 @@ static int pci_eg20t_init(struct pci_dev *dev)
#endif
}
+#define PCI_DEVICE_ID_EXAR_XR17V4358 0x4358
+#define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358
+
static int
pci_xr17c154_setup(struct serial_private *priv,
const struct pciserial_board *board,
@@ -1832,6 +1760,15 @@ pci_xr17c154_setup(struct serial_private *priv,
return pci_default_setup(priv, board, port, idx);
}
+static inline int
+xr17v35x_has_slave(struct serial_private *priv)
+{
+ const int dev_id = priv->dev->device;
+
+ return ((dev_id == PCI_DEVICE_ID_EXAR_XR17V4358) ||
+ (dev_id == PCI_DEVICE_ID_EXAR_XR17V8358));
+}
+
static int
pci_xr17v35x_setup(struct serial_private *priv,
const struct pciserial_board *board,
@@ -1846,6 +1783,13 @@ pci_xr17v35x_setup(struct serial_private *priv,
port->port.flags |= UPF_EXAR_EFR;
/*
+ * Setup the uart clock for the devices on expansion slot to
+ * half the clock speed of the main chip (which is 125MHz)
+ */
+ if (xr17v35x_has_slave(priv) && idx >= 8)
+ port->port.uartclk = (7812500 * 16 / 2);
+
+ /*
* Setup Multipurpose Input/Output pins.
*/
if (idx == 0) {
@@ -1997,8 +1941,7 @@ pci_wch_ch38x_setup(struct serial_private *priv,
#define PCIE_VENDOR_ID_WCH 0x1c00
#define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250
#define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470
-
-#define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358
+#define PCIE_DEVICE_ID_WCH_CH382_2S 0x3253
#define PCI_VENDOR_ID_PERICOM 0x12D8
#define PCI_DEVICE_ID_PERICOM_PI7C9X7951 0x7951
@@ -2113,42 +2056,28 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
},
{
.vendor = PCI_VENDOR_ID_INTEL,
- .device = PCI_DEVICE_ID_INTEL_PNW_UART1,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pnw_serial_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = PCI_DEVICE_ID_INTEL_PNW_UART2,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .setup = pnw_serial_setup,
- },
- {
- .vendor = PCI_VENDOR_ID_INTEL,
- .device = PCI_DEVICE_ID_INTEL_PNW_UART3,
+ .device = PCI_DEVICE_ID_INTEL_BSW_UART1,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .setup = pnw_serial_setup,
+ .setup = byt_serial_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
- .device = PCI_DEVICE_ID_INTEL_TNG_UART,
+ .device = PCI_DEVICE_ID_INTEL_BSW_UART2,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .setup = tng_serial_setup,
+ .setup = byt_serial_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
- .device = PCI_DEVICE_ID_INTEL_BSW_UART1,
+ .device = PCI_DEVICE_ID_INTEL_BDW_UART1,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = byt_serial_setup,
},
{
.vendor = PCI_VENDOR_ID_INTEL,
- .device = PCI_DEVICE_ID_INTEL_BSW_UART2,
+ .device = PCI_DEVICE_ID_INTEL_BDW_UART2,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.setup = byt_serial_setup,
@@ -2515,6 +2444,13 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
},
{
.vendor = PCI_VENDOR_ID_EXAR,
+ .device = PCI_DEVICE_ID_EXAR_XR17V4358,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_xr17v35x_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_EXAR,
.device = PCI_DEVICE_ID_EXAR_XR17V8358,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
@@ -2702,6 +2638,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.subdevice = PCI_ANY_ID,
.setup = pci_wch_ch353_setup,
},
+ /* WCH CH382 2S card (16850 clone) */
+ {
+ .vendor = PCIE_VENDOR_ID_WCH,
+ .device = PCIE_DEVICE_ID_WCH_CH382_2S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch38x_setup,
+ },
/* WCH CH382 2S1P card (16850 clone) */
{
.vendor = PCIE_VENDOR_ID_WCH,
@@ -2999,6 +2943,7 @@ enum pci_board_num_t {
pbn_exar_XR17V352,
pbn_exar_XR17V354,
pbn_exar_XR17V358,
+ pbn_exar_XR17V4358,
pbn_exar_XR17V8358,
pbn_exar_ibm_saturn,
pbn_pasemi_1682M,
@@ -3012,8 +2957,6 @@ enum pci_board_num_t {
pbn_ADDIDATA_PCIe_8_3906250,
pbn_ce4100_1_115200,
pbn_byt,
- pbn_pnw,
- pbn_tng,
pbn_qrk,
pbn_omegapci,
pbn_NETMOS9900_2s_115200,
@@ -3021,6 +2964,7 @@ enum pci_board_num_t {
pbn_fintek_4,
pbn_fintek_8,
pbn_fintek_12,
+ pbn_wch382_2,
pbn_wch384_4,
pbn_pericom_PI7C9X7951,
pbn_pericom_PI7C9X7952,
@@ -3690,6 +3634,14 @@ static struct pciserial_board pci_boards[] = {
.reg_shift = 0,
.first_offset = 0,
},
+ [pbn_exar_XR17V4358] = {
+ .flags = FL_BASE0,
+ .num_ports = 12,
+ .base_baud = 7812500,
+ .uart_offset = 0x400,
+ .reg_shift = 0,
+ .first_offset = 0,
+ },
[pbn_exar_XR17V8358] = {
.flags = FL_BASE0,
.num_ports = 16,
@@ -3792,16 +3744,6 @@ static struct pciserial_board pci_boards[] = {
.uart_offset = 0x80,
.reg_shift = 2,
},
- [pbn_pnw] = {
- .flags = FL_BASE0,
- .num_ports = 1,
- .base_baud = 115200,
- },
- [pbn_tng] = {
- .flags = FL_BASE0,
- .num_ports = 1,
- .base_baud = 1843200,
- },
[pbn_qrk] = {
.flags = FL_BASE0,
.num_ports = 1,
@@ -3843,6 +3785,13 @@ static struct pciserial_board pci_boards[] = {
.base_baud = 115200,
.first_offset = 0x40,
},
+ [pbn_wch382_2] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ .first_offset = 0xC0,
+ },
[pbn_wch384_4] = {
.flags = FL_BASE0,
.num_ports = 4,
@@ -3890,6 +3839,13 @@ static const struct pci_device_id blacklist[] = {
{ PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */
{ PCI_DEVICE(0x1c00, 0x3250), }, /* WCH CH382 2S1P */
{ PCI_DEVICE(0x1c00, 0x3470), }, /* WCH CH384 4S */
+
+ /* Intel platforms with MID UART */
+ { PCI_VDEVICE(INTEL, 0x081b), },
+ { PCI_VDEVICE(INTEL, 0x081c), },
+ { PCI_VDEVICE(INTEL, 0x081d), },
+ { PCI_VDEVICE(INTEL, 0x1191), },
+ { PCI_VDEVICE(INTEL, 0x19d8), },
};
/*
@@ -5133,6 +5089,10 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID,
0,
0, pbn_exar_XR17V358 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V4358,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0,
+ 0, pbn_exar_XR17V4358 },
{ PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V8358,
PCI_ANY_ID, PCI_ANY_ID,
0,
@@ -5582,25 +5542,15 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
pbn_byt },
- /*
- * Intel Penwell
- */
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART1,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pnw},
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART2,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pnw},
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PNW_UART3,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pnw},
-
- /*
- * Intel Tangier
- */
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TNG_UART,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_tng},
+ /* Intel Broadwell */
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BDW_UART1,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
+ pbn_byt },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BDW_UART2,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
+ pbn_byt },
/*
* Intel Quark x1000
@@ -5641,6 +5591,10 @@ static struct pci_device_id serial_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID,
0, 0, pbn_b0_bt_2_115200 },
+ { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH382_2S,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, pbn_wch382_2 },
+
{ PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S,
PCI_ANY_ID, PCI_ANY_ID,
0, 0, pbn_wch384_4 },
diff --git a/kernel/drivers/tty/serial/8250/8250_port.c b/kernel/drivers/tty/serial/8250/8250_port.c
new file mode 100644
index 000000000..5568d70ee
--- /dev/null
+++ b/kernel/drivers/tty/serial/8250/8250_port.c
@@ -0,0 +1,2935 @@
+/*
+ * Base port operations for 8250/16550-type serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ * Split from 8250_core.c, Copyright (C) 2001 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * A note about mapbase / membase
+ *
+ * mapbase is the physical address of the IO port.
+ * membase is an 'ioremapped' cookie.
+ */
+
+#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/tty.h>
+#include <linux/ratelimit.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/nmi.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/kdb.h>
+#include <linux/uaccess.h>
+#include <linux/pm_runtime.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#include "8250.h"
+
+/*
+ * Debugging.
+ */
+#if 0
+#define DEBUG_AUTOCONF(fmt...) printk(fmt)
+#else
+#define DEBUG_AUTOCONF(fmt...) do { } while (0)
+#endif
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+/*
+ * Here we define the default xmit fifo size used for each type of UART.
+ */
+static const struct serial8250_config uart_config[] = {
+ [PORT_UNKNOWN] = {
+ .name = "unknown",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_8250] = {
+ .name = "8250",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16450] = {
+ .name = "16450",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16550] = {
+ .name = "16550",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16550A] = {
+ .name = "16550A",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .rxtrig_bytes = {1, 4, 8, 14},
+ .flags = UART_CAP_FIFO,
+ },
+ [PORT_CIRRUS] = {
+ .name = "Cirrus",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16650] = {
+ .name = "ST16650",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+ },
+ [PORT_16650V2] = {
+ .name = "ST16650V2",
+ .fifo_size = 32,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
+ UART_FCR_T_TRIG_00,
+ .rxtrig_bytes = {8, 16, 24, 28},
+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+ },
+ [PORT_16750] = {
+ .name = "TI16750",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
+ UART_FCR7_64BYTE,
+ .rxtrig_bytes = {1, 16, 32, 56},
+ .flags = UART_CAP_FIFO | UART_CAP_SLEEP | UART_CAP_AFE,
+ },
+ [PORT_STARTECH] = {
+ .name = "Startech",
+ .fifo_size = 1,
+ .tx_loadsz = 1,
+ },
+ [PORT_16C950] = {
+ .name = "16C950/954",
+ .fifo_size = 128,
+ .tx_loadsz = 128,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ /* UART_CAP_EFR breaks billionon CF bluetooth card. */
+ .flags = UART_CAP_FIFO | UART_CAP_SLEEP,
+ },
+ [PORT_16654] = {
+ .name = "ST16654",
+ .fifo_size = 64,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
+ UART_FCR_T_TRIG_10,
+ .rxtrig_bytes = {8, 16, 56, 60},
+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+ },
+ [PORT_16850] = {
+ .name = "XR16850",
+ .fifo_size = 128,
+ .tx_loadsz = 128,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_EFR | UART_CAP_SLEEP,
+ },
+ [PORT_RSA] = {
+ .name = "RSA",
+ .fifo_size = 2048,
+ .tx_loadsz = 2048,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11,
+ .flags = UART_CAP_FIFO,
+ },
+ [PORT_NS16550A] = {
+ .name = "NS16550A",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_NATSEMI,
+ },
+ [PORT_XSCALE] = {
+ .name = "XScale",
+ .fifo_size = 32,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_UUE | UART_CAP_RTOIE,
+ },
+ [PORT_OCTEON] = {
+ .name = "OCTEON",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO,
+ },
+ [PORT_AR7] = {
+ .name = "AR7",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+ [PORT_U6_16550A] = {
+ .name = "U6_16550A",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+ [PORT_TEGRA] = {
+ .name = "Tegra",
+ .fifo_size = 32,
+ .tx_loadsz = 8,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01 |
+ UART_FCR_T_TRIG_01,
+ .rxtrig_bytes = {1, 4, 8, 14},
+ .flags = UART_CAP_FIFO | UART_CAP_RTOIE,
+ },
+ [PORT_XR17D15X] = {
+ .name = "XR17D15X",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR |
+ UART_CAP_SLEEP,
+ },
+ [PORT_XR17V35X] = {
+ .name = "XR17V35X",
+ .fifo_size = 256,
+ .tx_loadsz = 256,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_11 |
+ UART_FCR_T_TRIG_11,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR |
+ UART_CAP_SLEEP,
+ },
+ [PORT_LPC3220] = {
+ .name = "LPC3220",
+ .fifo_size = 64,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_DMA_SELECT | UART_FCR_ENABLE_FIFO |
+ UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00,
+ .flags = UART_CAP_FIFO,
+ },
+ [PORT_BRCM_TRUMANAGE] = {
+ .name = "TruManage",
+ .fifo_size = 1,
+ .tx_loadsz = 1024,
+ .flags = UART_CAP_HFIFO,
+ },
+ [PORT_8250_CIR] = {
+ .name = "CIR port"
+ },
+ [PORT_ALTR_16550_F32] = {
+ .name = "Altera 16550 FIFO32",
+ .fifo_size = 32,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+ [PORT_ALTR_16550_F64] = {
+ .name = "Altera 16550 FIFO64",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+ [PORT_ALTR_16550_F128] = {
+ .name = "Altera 16550 FIFO128",
+ .fifo_size = 128,
+ .tx_loadsz = 128,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+/* tx_loadsz is set to 63-bytes instead of 64-bytes to implement
+workaround of errata A-008006 which states that tx_loadsz should be
+configured less than Maximum supported fifo bytes */
+ [PORT_16550A_FSL64] = {
+ .name = "16550A_FSL64",
+ .fifo_size = 64,
+ .tx_loadsz = 63,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
+ UART_FCR7_64BYTE,
+ .flags = UART_CAP_FIFO,
+ },
+ [PORT_RT2880] = {
+ .name = "Palmchip BK-3103",
+ .fifo_size = 16,
+ .tx_loadsz = 16,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .rxtrig_bytes = {1, 4, 8, 14},
+ .flags = UART_CAP_FIFO,
+ },
+};
+
+/* Uart divisor latch read */
+static int default_serial_dl_read(struct uart_8250_port *up)
+{
+ return serial_in(up, UART_DLL) | serial_in(up, UART_DLM) << 8;
+}
+
+/* Uart divisor latch write */
+static void default_serial_dl_write(struct uart_8250_port *up, int value)
+{
+ serial_out(up, UART_DLL, value & 0xff);
+ serial_out(up, UART_DLM, value >> 8 & 0xff);
+}
+
+#ifdef CONFIG_SERIAL_8250_RT288X
+
+/* Au1x00/RT288x UART hardware has a weird register layout */
+static const s8 au_io_in_map[8] = {
+ 0, /* UART_RX */
+ 2, /* UART_IER */
+ 3, /* UART_IIR */
+ 5, /* UART_LCR */
+ 6, /* UART_MCR */
+ 7, /* UART_LSR */
+ 8, /* UART_MSR */
+ -1, /* UART_SCR (unmapped) */
+};
+
+static const s8 au_io_out_map[8] = {
+ 1, /* UART_TX */
+ 2, /* UART_IER */
+ 4, /* UART_FCR */
+ 5, /* UART_LCR */
+ 6, /* UART_MCR */
+ -1, /* UART_LSR (unmapped) */
+ -1, /* UART_MSR (unmapped) */
+ -1, /* UART_SCR (unmapped) */
+};
+
+static unsigned int au_serial_in(struct uart_port *p, int offset)
+{
+ if (offset >= ARRAY_SIZE(au_io_in_map))
+ return UINT_MAX;
+ offset = au_io_in_map[offset];
+ if (offset < 0)
+ return UINT_MAX;
+ return __raw_readl(p->membase + (offset << p->regshift));
+}
+
+static void au_serial_out(struct uart_port *p, int offset, int value)
+{
+ if (offset >= ARRAY_SIZE(au_io_out_map))
+ return;
+ offset = au_io_out_map[offset];
+ if (offset < 0)
+ return;
+ __raw_writel(value, p->membase + (offset << p->regshift));
+}
+
+/* Au1x00 haven't got a standard divisor latch */
+static int au_serial_dl_read(struct uart_8250_port *up)
+{
+ return __raw_readl(up->port.membase + 0x28);
+}
+
+static void au_serial_dl_write(struct uart_8250_port *up, int value)
+{
+ __raw_writel(value, up->port.membase + 0x28);
+}
+
+#endif
+
+static unsigned int hub6_serial_in(struct uart_port *p, int offset)
+{
+ offset = offset << p->regshift;
+ outb(p->hub6 - 1 + offset, p->iobase);
+ return inb(p->iobase + 1);
+}
+
+static void hub6_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = offset << p->regshift;
+ outb(p->hub6 - 1 + offset, p->iobase);
+ outb(value, p->iobase + 1);
+}
+
+static unsigned int mem_serial_in(struct uart_port *p, int offset)
+{
+ offset = offset << p->regshift;
+ return readb(p->membase + offset);
+}
+
+static void mem_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = offset << p->regshift;
+ writeb(value, p->membase + offset);
+}
+
+static void mem32_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = offset << p->regshift;
+ writel(value, p->membase + offset);
+}
+
+static unsigned int mem32_serial_in(struct uart_port *p, int offset)
+{
+ offset = offset << p->regshift;
+ return readl(p->membase + offset);
+}
+
+static void mem32be_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = offset << p->regshift;
+ iowrite32be(value, p->membase + offset);
+}
+
+static unsigned int mem32be_serial_in(struct uart_port *p, int offset)
+{
+ offset = offset << p->regshift;
+ return ioread32be(p->membase + offset);
+}
+
+static unsigned int io_serial_in(struct uart_port *p, int offset)
+{
+ offset = offset << p->regshift;
+ return inb(p->iobase + offset);
+}
+
+static void io_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = offset << p->regshift;
+ outb(value, p->iobase + offset);
+}
+
+static int serial8250_default_handle_irq(struct uart_port *port);
+static int exar_handle_irq(struct uart_port *port);
+
+static void set_io_from_upio(struct uart_port *p)
+{
+ struct uart_8250_port *up = up_to_u8250p(p);
+
+ up->dl_read = default_serial_dl_read;
+ up->dl_write = default_serial_dl_write;
+
+ switch (p->iotype) {
+ case UPIO_HUB6:
+ p->serial_in = hub6_serial_in;
+ p->serial_out = hub6_serial_out;
+ break;
+
+ case UPIO_MEM:
+ p->serial_in = mem_serial_in;
+ p->serial_out = mem_serial_out;
+ break;
+
+ case UPIO_MEM32:
+ p->serial_in = mem32_serial_in;
+ p->serial_out = mem32_serial_out;
+ break;
+
+ case UPIO_MEM32BE:
+ p->serial_in = mem32be_serial_in;
+ p->serial_out = mem32be_serial_out;
+ break;
+
+#ifdef CONFIG_SERIAL_8250_RT288X
+ case UPIO_AU:
+ p->serial_in = au_serial_in;
+ p->serial_out = au_serial_out;
+ up->dl_read = au_serial_dl_read;
+ up->dl_write = au_serial_dl_write;
+ break;
+#endif
+
+ default:
+ p->serial_in = io_serial_in;
+ p->serial_out = io_serial_out;
+ break;
+ }
+ /* Remember loaded iotype */
+ up->cur_iotype = p->iotype;
+ p->handle_irq = serial8250_default_handle_irq;
+}
+
+static void
+serial_port_out_sync(struct uart_port *p, int offset, int value)
+{
+ switch (p->iotype) {
+ case UPIO_MEM:
+ case UPIO_MEM32:
+ case UPIO_MEM32BE:
+ case UPIO_AU:
+ p->serial_out(p, offset, value);
+ p->serial_in(p, UART_LCR); /* safe, no side-effects */
+ break;
+ default:
+ p->serial_out(p, offset, value);
+ }
+}
+
+/*
+ * For the 16C950
+ */
+static void serial_icr_write(struct uart_8250_port *up, int offset, int value)
+{
+ serial_out(up, UART_SCR, offset);
+ serial_out(up, UART_ICR, value);
+}
+
+static unsigned int serial_icr_read(struct uart_8250_port *up, int offset)
+{
+ unsigned int value;
+
+ serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
+ serial_out(up, UART_SCR, offset);
+ value = serial_in(up, UART_ICR);
+ serial_icr_write(up, UART_ACR, up->acr);
+
+ return value;
+}
+
+/*
+ * FIFO support.
+ */
+static void serial8250_clear_fifos(struct uart_8250_port *p)
+{
+ if (p->capabilities & UART_CAP_FIFO) {
+ serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_out(p, UART_FCR, 0);
+ }
+}
+
+void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p)
+{
+ serial8250_clear_fifos(p);
+ serial_out(p, UART_FCR, p->fcr);
+}
+EXPORT_SYMBOL_GPL(serial8250_clear_and_reinit_fifos);
+
+void serial8250_rpm_get(struct uart_8250_port *p)
+{
+ if (!(p->capabilities & UART_CAP_RPM))
+ return;
+ pm_runtime_get_sync(p->port.dev);
+}
+EXPORT_SYMBOL_GPL(serial8250_rpm_get);
+
+void serial8250_rpm_put(struct uart_8250_port *p)
+{
+ if (!(p->capabilities & UART_CAP_RPM))
+ return;
+ pm_runtime_mark_last_busy(p->port.dev);
+ pm_runtime_put_autosuspend(p->port.dev);
+}
+EXPORT_SYMBOL_GPL(serial8250_rpm_put);
+
+/*
+ * These two wrappers ensure that enable_runtime_pm_tx() can be called more than
+ * once and disable_runtime_pm_tx() will still disable RPM because the fifo is
+ * empty and the HW can idle again.
+ */
+static void serial8250_rpm_get_tx(struct uart_8250_port *p)
+{
+ unsigned char rpm_active;
+
+ if (!(p->capabilities & UART_CAP_RPM))
+ return;
+
+ rpm_active = xchg(&p->rpm_tx_active, 1);
+ if (rpm_active)
+ return;
+ pm_runtime_get_sync(p->port.dev);
+}
+
+static void serial8250_rpm_put_tx(struct uart_8250_port *p)
+{
+ unsigned char rpm_active;
+
+ if (!(p->capabilities & UART_CAP_RPM))
+ return;
+
+ rpm_active = xchg(&p->rpm_tx_active, 0);
+ if (!rpm_active)
+ return;
+ pm_runtime_mark_last_busy(p->port.dev);
+ pm_runtime_put_autosuspend(p->port.dev);
+}
+
+/*
+ * IER sleep support. UARTs which have EFRs need the "extended
+ * capability" bit enabled. Note that on XR16C850s, we need to
+ * reset LCR to write to IER.
+ */
+static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
+{
+ unsigned char lcr = 0, efr = 0;
+ /*
+ * Exar UARTs have a SLEEP register that enables or disables
+ * each UART to enter sleep mode separately. On the XR17V35x the
+ * register is accessible to each UART at the UART_EXAR_SLEEP
+ * offset but the UART channel may only write to the corresponding
+ * bit.
+ */
+ serial8250_rpm_get(p);
+ if ((p->port.type == PORT_XR17V35X) ||
+ (p->port.type == PORT_XR17D15X)) {
+ serial_out(p, UART_EXAR_SLEEP, sleep ? 0xff : 0);
+ goto out;
+ }
+
+ if (p->capabilities & UART_CAP_SLEEP) {
+ if (p->capabilities & UART_CAP_EFR) {
+ lcr = serial_in(p, UART_LCR);
+ efr = serial_in(p, UART_EFR);
+ serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B);
+ serial_out(p, UART_EFR, UART_EFR_ECB);
+ serial_out(p, UART_LCR, 0);
+ }
+ serial_out(p, UART_IER, sleep ? UART_IERX_SLEEP : 0);
+ if (p->capabilities & UART_CAP_EFR) {
+ serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B);
+ serial_out(p, UART_EFR, efr);
+ serial_out(p, UART_LCR, lcr);
+ }
+ }
+out:
+ serial8250_rpm_put(p);
+}
+
+#ifdef CONFIG_SERIAL_8250_RSA
+/*
+ * Attempts to turn on the RSA FIFO. Returns zero on failure.
+ * We set the port uart clock rate if we succeed.
+ */
+static int __enable_rsa(struct uart_8250_port *up)
+{
+ unsigned char mode;
+ int result;
+
+ mode = serial_in(up, UART_RSA_MSR);
+ result = mode & UART_RSA_MSR_FIFO;
+
+ if (!result) {
+ serial_out(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
+ mode = serial_in(up, UART_RSA_MSR);
+ result = mode & UART_RSA_MSR_FIFO;
+ }
+
+ if (result)
+ up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
+
+ return result;
+}
+
+static void enable_rsa(struct uart_8250_port *up)
+{
+ if (up->port.type == PORT_RSA) {
+ if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
+ spin_lock_irq(&up->port.lock);
+ __enable_rsa(up);
+ spin_unlock_irq(&up->port.lock);
+ }
+ if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
+ serial_out(up, UART_RSA_FRR, 0);
+ }
+}
+
+/*
+ * Attempts to turn off the RSA FIFO. Returns zero on failure.
+ * It is unknown why interrupts were disabled in here. However,
+ * the caller is expected to preserve this behaviour by grabbing
+ * the spinlock before calling this function.
+ */
+static void disable_rsa(struct uart_8250_port *up)
+{
+ unsigned char mode;
+ int result;
+
+ if (up->port.type == PORT_RSA &&
+ up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
+ spin_lock_irq(&up->port.lock);
+
+ mode = serial_in(up, UART_RSA_MSR);
+ result = !(mode & UART_RSA_MSR_FIFO);
+
+ if (!result) {
+ serial_out(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
+ mode = serial_in(up, UART_RSA_MSR);
+ result = !(mode & UART_RSA_MSR_FIFO);
+ }
+
+ if (result)
+ up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
+ spin_unlock_irq(&up->port.lock);
+ }
+}
+#endif /* CONFIG_SERIAL_8250_RSA */
+
+/*
+ * This is a quickie test to see how big the FIFO is.
+ * It doesn't work at all the time, more's the pity.
+ */
+static int size_fifo(struct uart_8250_port *up)
+{
+ unsigned char old_fcr, old_mcr, old_lcr;
+ unsigned short old_dl;
+ int count;
+
+ old_lcr = serial_in(up, UART_LCR);
+ serial_out(up, UART_LCR, 0);
+ old_fcr = serial_in(up, UART_FCR);
+ old_mcr = serial_in(up, UART_MCR);
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ serial_out(up, UART_MCR, UART_MCR_LOOP);
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
+ old_dl = serial_dl_read(up);
+ serial_dl_write(up, 0x0001);
+ serial_out(up, UART_LCR, 0x03);
+ for (count = 0; count < 256; count++)
+ serial_out(up, UART_TX, count);
+ mdelay(20);/* FIXME - schedule_timeout */
+ for (count = 0; (serial_in(up, UART_LSR) & UART_LSR_DR) &&
+ (count < 256); count++)
+ serial_in(up, UART_RX);
+ serial_out(up, UART_FCR, old_fcr);
+ serial_out(up, UART_MCR, old_mcr);
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
+ serial_dl_write(up, old_dl);
+ serial_out(up, UART_LCR, old_lcr);
+
+ return count;
+}
+
+/*
+ * Read UART ID using the divisor method - set DLL and DLM to zero
+ * and the revision will be in DLL and device type in DLM. We
+ * preserve the device state across this.
+ */
+static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
+{
+ unsigned char old_dll, old_dlm, old_lcr;
+ unsigned int id;
+
+ old_lcr = serial_in(p, UART_LCR);
+ serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A);
+
+ old_dll = serial_in(p, UART_DLL);
+ old_dlm = serial_in(p, UART_DLM);
+
+ serial_out(p, UART_DLL, 0);
+ serial_out(p, UART_DLM, 0);
+
+ id = serial_in(p, UART_DLL) | serial_in(p, UART_DLM) << 8;
+
+ serial_out(p, UART_DLL, old_dll);
+ serial_out(p, UART_DLM, old_dlm);
+ serial_out(p, UART_LCR, old_lcr);
+
+ return id;
+}
+
+/*
+ * This is a helper routine to autodetect StarTech/Exar/Oxsemi UART's.
+ * When this function is called we know it is at least a StarTech
+ * 16650 V2, but it might be one of several StarTech UARTs, or one of
+ * its clones. (We treat the broken original StarTech 16650 V1 as a
+ * 16550, and why not? Startech doesn't seem to even acknowledge its
+ * existence.)
+ *
+ * What evil have men's minds wrought...
+ */
+static void autoconfig_has_efr(struct uart_8250_port *up)
+{
+ unsigned int id1, id2, id3, rev;
+
+ /*
+ * Everything with an EFR has SLEEP
+ */
+ up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
+
+ /*
+ * First we check to see if it's an Oxford Semiconductor UART.
+ *
+ * If we have to do this here because some non-National
+ * Semiconductor clone chips lock up if you try writing to the
+ * LSR register (which serial_icr_read does)
+ */
+
+ /*
+ * Check for Oxford Semiconductor 16C950.
+ *
+ * EFR [4] must be set else this test fails.
+ *
+ * This shouldn't be necessary, but Mike Hudson (Exoray@isys.ca)
+ * claims that it's needed for 952 dual UART's (which are not
+ * recommended for new designs).
+ */
+ up->acr = 0;
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+ serial_out(up, UART_EFR, UART_EFR_ECB);
+ serial_out(up, UART_LCR, 0x00);
+ id1 = serial_icr_read(up, UART_ID1);
+ id2 = serial_icr_read(up, UART_ID2);
+ id3 = serial_icr_read(up, UART_ID3);
+ rev = serial_icr_read(up, UART_REV);
+
+ DEBUG_AUTOCONF("950id=%02x:%02x:%02x:%02x ", id1, id2, id3, rev);
+
+ if (id1 == 0x16 && id2 == 0xC9 &&
+ (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) {
+ up->port.type = PORT_16C950;
+
+ /*
+ * Enable work around for the Oxford Semiconductor 952 rev B
+ * chip which causes it to seriously miscalculate baud rates
+ * when DLL is 0.
+ */
+ if (id3 == 0x52 && rev == 0x01)
+ up->bugs |= UART_BUG_QUOT;
+ return;
+ }
+
+ /*
+ * We check for a XR16C850 by setting DLL and DLM to 0, and then
+ * reading back DLL and DLM. The chip type depends on the DLM
+ * value read back:
+ * 0x10 - XR16C850 and the DLL contains the chip revision.
+ * 0x12 - XR16C2850.
+ * 0x14 - XR16C854.
+ */
+ id1 = autoconfig_read_divisor_id(up);
+ DEBUG_AUTOCONF("850id=%04x ", id1);
+
+ id2 = id1 >> 8;
+ if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) {
+ up->port.type = PORT_16850;
+ return;
+ }
+
+ /*
+ * It wasn't an XR16C850.
+ *
+ * We distinguish between the '654 and the '650 by counting
+ * how many bytes are in the FIFO. I'm using this for now,
+ * since that's the technique that was sent to me in the
+ * serial driver update, but I'm not convinced this works.
+ * I've had problems doing this in the past. -TYT
+ */
+ if (size_fifo(up) == 64)
+ up->port.type = PORT_16654;
+ else
+ up->port.type = PORT_16650V2;
+}
+
+/*
+ * We detected a chip without a FIFO. Only two fall into
+ * this category - the original 8250 and the 16450. The
+ * 16450 has a scratch register (accessible with LCR=0)
+ */
+static void autoconfig_8250(struct uart_8250_port *up)
+{
+ unsigned char scratch, status1, status2;
+
+ up->port.type = PORT_8250;
+
+ scratch = serial_in(up, UART_SCR);
+ serial_out(up, UART_SCR, 0xa5);
+ status1 = serial_in(up, UART_SCR);
+ serial_out(up, UART_SCR, 0x5a);
+ status2 = serial_in(up, UART_SCR);
+ serial_out(up, UART_SCR, scratch);
+
+ if (status1 == 0xa5 && status2 == 0x5a)
+ up->port.type = PORT_16450;
+}
+
+static int broken_efr(struct uart_8250_port *up)
+{
+ /*
+ * Exar ST16C2550 "A2" devices incorrectly detect as
+ * having an EFR, and report an ID of 0x0201. See
+ * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
+ */
+ if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
+ return 1;
+
+ return 0;
+}
+
+/*
+ * We know that the chip has FIFOs. Does it have an EFR? The
+ * EFR is located in the same register position as the IIR and
+ * we know the top two bits of the IIR are currently set. The
+ * EFR should contain zero. Try to read the EFR.
+ */
+static void autoconfig_16550a(struct uart_8250_port *up)
+{
+ unsigned char status1, status2;
+ unsigned int iersave;
+
+ up->port.type = PORT_16550A;
+ up->capabilities |= UART_CAP_FIFO;
+
+ /*
+ * XR17V35x UARTs have an extra divisor register, DLD
+ * that gets enabled with when DLAB is set which will
+ * cause the device to incorrectly match and assign
+ * port type to PORT_16650. The EFR for this UART is
+ * found at offset 0x09. Instead check the Deice ID (DVID)
+ * register for a 2, 4 or 8 port UART.
+ */
+ if (up->port.flags & UPF_EXAR_EFR) {
+ status1 = serial_in(up, UART_EXAR_DVID);
+ if (status1 == 0x82 || status1 == 0x84 || status1 == 0x88) {
+ DEBUG_AUTOCONF("Exar XR17V35x ");
+ up->port.type = PORT_XR17V35X;
+ up->capabilities |= UART_CAP_AFE | UART_CAP_EFR |
+ UART_CAP_SLEEP;
+
+ return;
+ }
+
+ }
+
+ /*
+ * Check for presence of the EFR when DLAB is set.
+ * Only ST16C650V1 UARTs pass this test.
+ */
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
+ if (serial_in(up, UART_EFR) == 0) {
+ serial_out(up, UART_EFR, 0xA8);
+ if (serial_in(up, UART_EFR) != 0) {
+ DEBUG_AUTOCONF("EFRv1 ");
+ up->port.type = PORT_16650;
+ up->capabilities |= UART_CAP_EFR | UART_CAP_SLEEP;
+ } else {
+ serial_out(up, UART_LCR, 0);
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
+ UART_FCR7_64BYTE);
+ status1 = serial_in(up, UART_IIR) >> 5;
+ serial_out(up, UART_FCR, 0);
+ serial_out(up, UART_LCR, 0);
+
+ if (status1 == 7)
+ up->port.type = PORT_16550A_FSL64;
+ else
+ DEBUG_AUTOCONF("Motorola 8xxx DUART ");
+ }
+ serial_out(up, UART_EFR, 0);
+ return;
+ }
+
+ /*
+ * Maybe it requires 0xbf to be written to the LCR.
+ * (other ST16C650V2 UARTs, TI16C752A, etc)
+ */
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+ if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) {
+ DEBUG_AUTOCONF("EFRv2 ");
+ autoconfig_has_efr(up);
+ return;
+ }
+
+ /*
+ * Check for a National Semiconductor SuperIO chip.
+ * Attempt to switch to bank 2, read the value of the LOOP bit
+ * from EXCR1. Switch back to bank 0, change it in MCR. Then
+ * switch back to bank 2, read it from EXCR1 again and check
+ * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2
+ */
+ serial_out(up, UART_LCR, 0);
+ status1 = serial_in(up, UART_MCR);
+ serial_out(up, UART_LCR, 0xE0);
+ status2 = serial_in(up, 0x02); /* EXCR1 */
+
+ if (!((status2 ^ status1) & UART_MCR_LOOP)) {
+ serial_out(up, UART_LCR, 0);
+ serial_out(up, UART_MCR, status1 ^ UART_MCR_LOOP);
+ serial_out(up, UART_LCR, 0xE0);
+ status2 = serial_in(up, 0x02); /* EXCR1 */
+ serial_out(up, UART_LCR, 0);
+ serial_out(up, UART_MCR, status1);
+
+ if ((status2 ^ status1) & UART_MCR_LOOP) {
+ unsigned short quot;
+
+ serial_out(up, UART_LCR, 0xE0);
+
+ quot = serial_dl_read(up);
+ quot <<= 3;
+
+ if (ns16550a_goto_highspeed(up))
+ serial_dl_write(up, quot);
+
+ serial_out(up, UART_LCR, 0);
+
+ up->port.uartclk = 921600*16;
+ up->port.type = PORT_NS16550A;
+ up->capabilities |= UART_NATSEMI;
+ return;
+ }
+ }
+
+ /*
+ * No EFR. Try to detect a TI16750, which only sets bit 5 of
+ * the IIR when 64 byte FIFO mode is enabled when DLAB is set.
+ * Try setting it with and without DLAB set. Cheap clones
+ * set bit 5 without DLAB set.
+ */
+ serial_out(up, UART_LCR, 0);
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
+ status1 = serial_in(up, UART_IIR) >> 5;
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
+ status2 = serial_in(up, UART_IIR) >> 5;
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_out(up, UART_LCR, 0);
+
+ DEBUG_AUTOCONF("iir1=%d iir2=%d ", status1, status2);
+
+ if (status1 == 6 && status2 == 7) {
+ up->port.type = PORT_16750;
+ up->capabilities |= UART_CAP_AFE | UART_CAP_SLEEP;
+ return;
+ }
+
+ /*
+ * Try writing and reading the UART_IER_UUE bit (b6).
+ * If it works, this is probably one of the Xscale platform's
+ * internal UARTs.
+ * We're going to explicitly set the UUE bit to 0 before
+ * trying to write and read a 1 just to make sure it's not
+ * already a 1 and maybe locked there before we even start start.
+ */
+ iersave = serial_in(up, UART_IER);
+ serial_out(up, UART_IER, iersave & ~UART_IER_UUE);
+ if (!(serial_in(up, UART_IER) & UART_IER_UUE)) {
+ /*
+ * OK it's in a known zero state, try writing and reading
+ * without disturbing the current state of the other bits.
+ */
+ serial_out(up, UART_IER, iersave | UART_IER_UUE);
+ if (serial_in(up, UART_IER) & UART_IER_UUE) {
+ /*
+ * It's an Xscale.
+ * We'll leave the UART_IER_UUE bit set to 1 (enabled).
+ */
+ DEBUG_AUTOCONF("Xscale ");
+ up->port.type = PORT_XSCALE;
+ up->capabilities |= UART_CAP_UUE | UART_CAP_RTOIE;
+ return;
+ }
+ } else {
+ /*
+ * If we got here we couldn't force the IER_UUE bit to 0.
+ * Log it and continue.
+ */
+ DEBUG_AUTOCONF("Couldn't force IER_UUE to 0 ");
+ }
+ serial_out(up, UART_IER, iersave);
+
+ /*
+ * Exar uarts have EFR in a weird location
+ */
+ if (up->port.flags & UPF_EXAR_EFR) {
+ DEBUG_AUTOCONF("Exar XR17D15x ");
+ up->port.type = PORT_XR17D15X;
+ up->capabilities |= UART_CAP_AFE | UART_CAP_EFR |
+ UART_CAP_SLEEP;
+
+ return;
+ }
+
+ /*
+ * We distinguish between 16550A and U6 16550A by counting
+ * how many bytes are in the FIFO.
+ */
+ if (up->port.type == PORT_16550A && size_fifo(up) == 64) {
+ up->port.type = PORT_U6_16550A;
+ up->capabilities |= UART_CAP_AFE;
+ }
+}
+
+/*
+ * This routine is called by rs_init() to initialize a specific serial
+ * port. It determines what type of UART chip this serial port is
+ * using: 8250, 16450, 16550, 16550A. The important question is
+ * whether or not this UART is a 16550A or not, since this will
+ * determine whether or not we can use its FIFO features or not.
+ */
+static void autoconfig(struct uart_8250_port *up)
+{
+ unsigned char status1, scratch, scratch2, scratch3;
+ unsigned char save_lcr, save_mcr;
+ struct uart_port *port = &up->port;
+ unsigned long flags;
+ unsigned int old_capabilities;
+
+ if (!port->iobase && !port->mapbase && !port->membase)
+ return;
+
+ DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ",
+ serial_index(port), port->iobase, port->membase);
+
+ /*
+ * We really do need global IRQs disabled here - we're going to
+ * be frobbing the chips IRQ enable register to see if it exists.
+ */
+ spin_lock_irqsave(&port->lock, flags);
+
+ up->capabilities = 0;
+ up->bugs = 0;
+
+ if (!(port->flags & UPF_BUGGY_UART)) {
+ /*
+ * Do a simple existence test first; if we fail this,
+ * there's no point trying anything else.
+ *
+ * 0x80 is used as a nonsense port to prevent against
+ * false positives due to ISA bus float. The
+ * assumption is that 0x80 is a non-existent port;
+ * which should be safe since include/asm/io.h also
+ * makes this assumption.
+ *
+ * Note: this is safe as long as MCR bit 4 is clear
+ * and the device is in "PC" mode.
+ */
+ scratch = serial_in(up, UART_IER);
+ serial_out(up, UART_IER, 0);
+#ifdef __i386__
+ outb(0xff, 0x080);
+#endif
+ /*
+ * Mask out IER[7:4] bits for test as some UARTs (e.g. TL
+ * 16C754B) allow only to modify them if an EFR bit is set.
+ */
+ scratch2 = serial_in(up, UART_IER) & 0x0f;
+ serial_out(up, UART_IER, 0x0F);
+#ifdef __i386__
+ outb(0, 0x080);
+#endif
+ scratch3 = serial_in(up, UART_IER) & 0x0f;
+ serial_out(up, UART_IER, scratch);
+ if (scratch2 != 0 || scratch3 != 0x0F) {
+ /*
+ * We failed; there's nothing here
+ */
+ spin_unlock_irqrestore(&port->lock, flags);
+ DEBUG_AUTOCONF("IER test failed (%02x, %02x) ",
+ scratch2, scratch3);
+ goto out;
+ }
+ }
+
+ save_mcr = serial_in(up, UART_MCR);
+ save_lcr = serial_in(up, UART_LCR);
+
+ /*
+ * Check to see if a UART is really there. Certain broken
+ * internal modems based on the Rockwell chipset fail this
+ * test, because they apparently don't implement the loopback
+ * test mode. So this test is skipped on the COM 1 through
+ * COM 4 ports. This *should* be safe, since no board
+ * manufacturer would be stupid enough to design a board
+ * that conflicts with COM 1-4 --- we hope!
+ */
+ if (!(port->flags & UPF_SKIP_TEST)) {
+ serial_out(up, UART_MCR, UART_MCR_LOOP | 0x0A);
+ status1 = serial_in(up, UART_MSR) & 0xF0;
+ serial_out(up, UART_MCR, save_mcr);
+ if (status1 != 0x90) {
+ spin_unlock_irqrestore(&port->lock, flags);
+ DEBUG_AUTOCONF("LOOP test failed (%02x) ",
+ status1);
+ goto out;
+ }
+ }
+
+ /*
+ * We're pretty sure there's a port here. Lets find out what
+ * type of port it is. The IIR top two bits allows us to find
+ * out if it's 8250 or 16450, 16550, 16550A or later. This
+ * determines what we test for next.
+ *
+ * We also initialise the EFR (if any) to zero for later. The
+ * EFR occupies the same register location as the FCR and IIR.
+ */
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+ serial_out(up, UART_EFR, 0);
+ serial_out(up, UART_LCR, 0);
+
+ serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
+ scratch = serial_in(up, UART_IIR) >> 6;
+
+ switch (scratch) {
+ case 0:
+ autoconfig_8250(up);
+ break;
+ case 1:
+ port->type = PORT_UNKNOWN;
+ break;
+ case 2:
+ port->type = PORT_16550;
+ break;
+ case 3:
+ autoconfig_16550a(up);
+ break;
+ }
+
+#ifdef CONFIG_SERIAL_8250_RSA
+ /*
+ * Only probe for RSA ports if we got the region.
+ */
+ if (port->type == PORT_16550A && up->probe & UART_PROBE_RSA &&
+ __enable_rsa(up))
+ port->type = PORT_RSA;
+#endif
+
+ serial_out(up, UART_LCR, save_lcr);
+
+ port->fifosize = uart_config[up->port.type].fifo_size;
+ old_capabilities = up->capabilities;
+ up->capabilities = uart_config[port->type].flags;
+ up->tx_loadsz = uart_config[port->type].tx_loadsz;
+
+ if (port->type == PORT_UNKNOWN)
+ goto out_lock;
+
+ /*
+ * Reset the UART.
+ */
+#ifdef CONFIG_SERIAL_8250_RSA
+ if (port->type == PORT_RSA)
+ serial_out(up, UART_RSA_FRR, 0);
+#endif
+ serial_out(up, UART_MCR, save_mcr);
+ serial8250_clear_fifos(up);
+ serial_in(up, UART_RX);
+ if (up->capabilities & UART_CAP_UUE)
+ serial_out(up, UART_IER, UART_IER_UUE);
+ else
+ serial_out(up, UART_IER, 0);
+
+out_lock:
+ spin_unlock_irqrestore(&port->lock, flags);
+ if (up->capabilities != old_capabilities) {
+ printk(KERN_WARNING
+ "ttyS%d: detected caps %08x should be %08x\n",
+ serial_index(port), old_capabilities,
+ up->capabilities);
+ }
+out:
+ DEBUG_AUTOCONF("iir=%d ", scratch);
+ DEBUG_AUTOCONF("type=%s\n", uart_config[port->type].name);
+}
+
+static void autoconfig_irq(struct uart_8250_port *up)
+{
+ struct uart_port *port = &up->port;
+ unsigned char save_mcr, save_ier;
+ unsigned char save_ICP = 0;
+ unsigned int ICP = 0;
+ unsigned long irqs;
+ int irq;
+
+ if (port->flags & UPF_FOURPORT) {
+ ICP = (port->iobase & 0xfe0) | 0x1f;
+ save_ICP = inb_p(ICP);
+ outb_p(0x80, ICP);
+ inb_p(ICP);
+ }
+
+ if (uart_console(port))
+ console_lock();
+
+ /* forget possible initially masked and pending IRQ */
+ probe_irq_off(probe_irq_on());
+ save_mcr = serial_in(up, UART_MCR);
+ save_ier = serial_in(up, UART_IER);
+ serial_out(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2);
+
+ irqs = probe_irq_on();
+ serial_out(up, UART_MCR, 0);
+ udelay(10);
+ if (port->flags & UPF_FOURPORT) {
+ serial_out(up, UART_MCR,
+ UART_MCR_DTR | UART_MCR_RTS);
+ } else {
+ serial_out(up, UART_MCR,
+ UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2);
+ }
+ serial_out(up, UART_IER, 0x0f); /* enable all intrs */
+ serial_in(up, UART_LSR);
+ serial_in(up, UART_RX);
+ serial_in(up, UART_IIR);
+ serial_in(up, UART_MSR);
+ serial_out(up, UART_TX, 0xFF);
+ udelay(20);
+ irq = probe_irq_off(irqs);
+
+ serial_out(up, UART_MCR, save_mcr);
+ serial_out(up, UART_IER, save_ier);
+
+ if (port->flags & UPF_FOURPORT)
+ outb_p(save_ICP, ICP);
+
+ if (uart_console(port))
+ console_unlock();
+
+ port->irq = (irq > 0) ? irq : 0;
+}
+
+static inline void __stop_tx(struct uart_8250_port *p)
+{
+ if (p->ier & UART_IER_THRI) {
+ p->ier &= ~UART_IER_THRI;
+ serial_out(p, UART_IER, p->ier);
+ serial8250_rpm_put_tx(p);
+ }
+}
+
+static void serial8250_stop_tx(struct uart_port *port)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+
+ serial8250_rpm_get(up);
+ __stop_tx(up);
+
+ /*
+ * We really want to stop the transmitter from sending.
+ */
+ if (port->type == PORT_16C950) {
+ up->acr |= UART_ACR_TXDIS;
+ serial_icr_write(up, UART_ACR, up->acr);
+ }
+ serial8250_rpm_put(up);
+}
+
+static void serial8250_start_tx(struct uart_port *port)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+
+ serial8250_rpm_get_tx(up);
+
+ if (up->dma && !up->dma->tx_dma(up))
+ return;
+
+ if (!(up->ier & UART_IER_THRI)) {
+ up->ier |= UART_IER_THRI;
+ serial_port_out(port, UART_IER, up->ier);
+
+ if (up->bugs & UART_BUG_TXEN) {
+ unsigned char lsr;
+ lsr = serial_in(up, UART_LSR);
+ up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+ if (lsr & UART_LSR_THRE)
+ serial8250_tx_chars(up);
+ }
+ }
+
+ /*
+ * Re-enable the transmitter if we disabled it.
+ */
+ if (port->type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
+ up->acr &= ~UART_ACR_TXDIS;
+ serial_icr_write(up, UART_ACR, up->acr);
+ }
+}
+
+static void serial8250_throttle(struct uart_port *port)
+{
+ port->throttle(port);
+}
+
+static void serial8250_unthrottle(struct uart_port *port)
+{
+ port->unthrottle(port);
+}
+
+static void serial8250_stop_rx(struct uart_port *port)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+
+ serial8250_rpm_get(up);
+
+ up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
+ up->port.read_status_mask &= ~UART_LSR_DR;
+ serial_port_out(port, UART_IER, up->ier);
+
+ serial8250_rpm_put(up);
+}
+
+static void serial8250_disable_ms(struct uart_port *port)
+{
+ struct uart_8250_port *up =
+ container_of(port, struct uart_8250_port, port);
+
+ /* no MSR capabilities */
+ if (up->bugs & UART_BUG_NOMSR)
+ return;
+
+ up->ier &= ~UART_IER_MSI;
+ serial_port_out(port, UART_IER, up->ier);
+}
+
+static void serial8250_enable_ms(struct uart_port *port)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+
+ /* no MSR capabilities */
+ if (up->bugs & UART_BUG_NOMSR)
+ return;
+
+ up->ier |= UART_IER_MSI;
+
+ serial8250_rpm_get(up);
+ serial_port_out(port, UART_IER, up->ier);
+ serial8250_rpm_put(up);
+}
+
+/*
+ * serial8250_rx_chars: processes according to the passed in LSR
+ * value, and returns the remaining LSR bits not handled
+ * by this Rx routine.
+ */
+unsigned char
+serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr)
+{
+ struct uart_port *port = &up->port;
+ unsigned char ch;
+ int max_count = 256;
+ char flag;
+
+ do {
+ if (likely(lsr & UART_LSR_DR))
+ ch = serial_in(up, UART_RX);
+ else
+ /*
+ * Intel 82571 has a Serial Over Lan device that will
+ * set UART_LSR_BI without setting UART_LSR_DR when
+ * it receives a break. To avoid reading from the
+ * receive buffer without UART_LSR_DR bit set, we
+ * just force the read character to be 0
+ */
+ ch = 0;
+
+ flag = TTY_NORMAL;
+ port->icount.rx++;
+
+ lsr |= up->lsr_saved_flags;
+ up->lsr_saved_flags = 0;
+
+ if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
+ if (lsr & UART_LSR_BI) {
+ lsr &= ~(UART_LSR_FE | UART_LSR_PE);
+ port->icount.brk++;
+ /*
+ * We do the SysRQ and SAK checking
+ * here because otherwise the break
+ * may get masked by ignore_status_mask
+ * or read_status_mask.
+ */
+ if (uart_handle_break(port))
+ goto ignore_char;
+ } else if (lsr & UART_LSR_PE)
+ port->icount.parity++;
+ else if (lsr & UART_LSR_FE)
+ port->icount.frame++;
+ if (lsr & UART_LSR_OE)
+ port->icount.overrun++;
+
+ /*
+ * Mask off conditions which should be ignored.
+ */
+ lsr &= port->read_status_mask;
+
+ if (lsr & UART_LSR_BI) {
+ DEBUG_INTR("handling break....");
+ flag = TTY_BREAK;
+ } else if (lsr & UART_LSR_PE)
+ flag = TTY_PARITY;
+ else if (lsr & UART_LSR_FE)
+ flag = TTY_FRAME;
+ }
+ if (uart_handle_sysrq_char(port, ch))
+ goto ignore_char;
+
+ uart_insert_char(port, lsr, UART_LSR_OE, ch, flag);
+
+ignore_char:
+ lsr = serial_in(up, UART_LSR);
+ } while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (--max_count > 0));
+ spin_unlock(&port->lock);
+ tty_flip_buffer_push(&port->state->port);
+ spin_lock(&port->lock);
+ return lsr;
+}
+EXPORT_SYMBOL_GPL(serial8250_rx_chars);
+
+void serial8250_tx_chars(struct uart_8250_port *up)
+{
+ struct uart_port *port = &up->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ int count;
+
+ if (port->x_char) {
+ serial_out(up, UART_TX, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+ if (uart_tx_stopped(port)) {
+ serial8250_stop_tx(port);
+ return;
+ }
+ if (uart_circ_empty(xmit)) {
+ __stop_tx(up);
+ return;
+ }
+
+ count = up->tx_loadsz;
+ do {
+ serial_out(up, UART_TX, xmit->buf[xmit->tail]);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ if (up->capabilities & UART_CAP_HFIFO) {
+ if ((serial_port_in(port, UART_LSR) & BOTH_EMPTY) !=
+ BOTH_EMPTY)
+ break;
+ }
+ } while (--count > 0);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ DEBUG_INTR("THRE...");
+
+ /*
+ * With RPM enabled, we have to wait until the FIFO is empty before the
+ * HW can go idle. So we get here once again with empty FIFO and disable
+ * the interrupt and RPM in __stop_tx()
+ */
+ if (uart_circ_empty(xmit) && !(up->capabilities & UART_CAP_RPM))
+ __stop_tx(up);
+}
+EXPORT_SYMBOL_GPL(serial8250_tx_chars);
+
+/* Caller holds uart port lock */
+unsigned int serial8250_modem_status(struct uart_8250_port *up)
+{
+ struct uart_port *port = &up->port;
+ unsigned int status = serial_in(up, UART_MSR);
+
+ status |= up->msr_saved_flags;
+ up->msr_saved_flags = 0;
+ if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
+ port->state != NULL) {
+ if (status & UART_MSR_TERI)
+ port->icount.rng++;
+ if (status & UART_MSR_DDSR)
+ port->icount.dsr++;
+ if (status & UART_MSR_DDCD)
+ uart_handle_dcd_change(port, status & UART_MSR_DCD);
+ if (status & UART_MSR_DCTS)
+ uart_handle_cts_change(port, status & UART_MSR_CTS);
+
+ wake_up_interruptible(&port->state->port.delta_msr_wait);
+ }
+
+ return status;
+}
+EXPORT_SYMBOL_GPL(serial8250_modem_status);
+
+/*
+ * This handles the interrupt from one port.
+ */
+int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
+{
+ unsigned char status;
+ unsigned long flags;
+ struct uart_8250_port *up = up_to_u8250p(port);
+ int dma_err = 0;
+
+ if (iir & UART_IIR_NO_INT)
+ return 0;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ status = serial_port_in(port, UART_LSR);
+
+ DEBUG_INTR("status = %x...", status);
+
+ if (status & (UART_LSR_DR | UART_LSR_BI)) {
+ if (up->dma)
+ dma_err = up->dma->rx_dma(up, iir);
+
+ if (!up->dma || dma_err)
+ status = serial8250_rx_chars(up, status);
+ }
+ serial8250_modem_status(up);
+ if ((!up->dma || (up->dma && up->dma->tx_err)) &&
+ (status & UART_LSR_THRE))
+ serial8250_tx_chars(up);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+ return 1;
+}
+EXPORT_SYMBOL_GPL(serial8250_handle_irq);
+
+static int serial8250_default_handle_irq(struct uart_port *port)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+ unsigned int iir;
+ int ret;
+
+ serial8250_rpm_get(up);
+
+ iir = serial_port_in(port, UART_IIR);
+ ret = serial8250_handle_irq(port, iir);
+
+ serial8250_rpm_put(up);
+ return ret;
+}
+
+/*
+ * These Exar UARTs have an extra interrupt indicator that could
+ * fire for a few unimplemented interrupts. One of which is a
+ * wakeup event when coming out of sleep. Put this here just
+ * to be on the safe side that these interrupts don't go unhandled.
+ */
+static int exar_handle_irq(struct uart_port *port)
+{
+ unsigned char int0, int1, int2, int3;
+ unsigned int iir = serial_port_in(port, UART_IIR);
+ int ret;
+
+ ret = serial8250_handle_irq(port, iir);
+
+ if ((port->type == PORT_XR17V35X) ||
+ (port->type == PORT_XR17D15X)) {
+ int0 = serial_port_in(port, 0x80);
+ int1 = serial_port_in(port, 0x81);
+ int2 = serial_port_in(port, 0x82);
+ int3 = serial_port_in(port, 0x83);
+ }
+
+ return ret;
+}
+
+static unsigned int serial8250_tx_empty(struct uart_port *port)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+ unsigned long flags;
+ unsigned int lsr;
+
+ serial8250_rpm_get(up);
+
+ spin_lock_irqsave(&port->lock, flags);
+ lsr = serial_port_in(port, UART_LSR);
+ up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ serial8250_rpm_put(up);
+
+ return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int serial8250_get_mctrl(struct uart_port *port)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+ unsigned int status;
+ unsigned int ret;
+
+ serial8250_rpm_get(up);
+ status = serial8250_modem_status(up);
+ serial8250_rpm_put(up);
+
+ ret = 0;
+ if (status & UART_MSR_DCD)
+ ret |= TIOCM_CAR;
+ if (status & UART_MSR_RI)
+ ret |= TIOCM_RNG;
+ if (status & UART_MSR_DSR)
+ ret |= TIOCM_DSR;
+ if (status & UART_MSR_CTS)
+ ret |= TIOCM_CTS;
+ return ret;
+}
+
+void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+ unsigned char mcr = 0;
+
+ if (mctrl & TIOCM_RTS)
+ mcr |= UART_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+ mcr |= UART_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ mcr |= UART_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ mcr |= UART_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ mcr |= UART_MCR_LOOP;
+
+ mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr;
+
+ serial_port_out(port, UART_MCR, mcr);
+}
+EXPORT_SYMBOL_GPL(serial8250_do_set_mctrl);
+
+static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ if (port->set_mctrl)
+ port->set_mctrl(port, mctrl);
+ else
+ serial8250_do_set_mctrl(port, mctrl);
+}
+
+static void serial8250_break_ctl(struct uart_port *port, int break_state)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+ unsigned long flags;
+
+ serial8250_rpm_get(up);
+ spin_lock_irqsave(&port->lock, flags);
+ if (break_state == -1)
+ up->lcr |= UART_LCR_SBC;
+ else
+ up->lcr &= ~UART_LCR_SBC;
+ serial_port_out(port, UART_LCR, up->lcr);
+ spin_unlock_irqrestore(&port->lock, flags);
+ serial8250_rpm_put(up);
+}
+
+/*
+ * Wait for transmitter & holding register to empty
+ */
+static void wait_for_xmitr(struct uart_8250_port *up, int bits)
+{
+ unsigned int status, tmout = 10000;
+
+ /* Wait up to 10ms for the character(s) to be sent. */
+ for (;;) {
+ status = serial_in(up, UART_LSR);
+
+ up->lsr_saved_flags |= status & LSR_SAVE_FLAGS;
+
+ if ((status & bits) == bits)
+ break;
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ }
+
+ /* Wait up to 1s for flow control if necessary */
+ if (up->port.flags & UPF_CONS_FLOW) {
+ unsigned int tmout;
+ for (tmout = 1000000; tmout; tmout--) {
+ unsigned int msr = serial_in(up, UART_MSR);
+ up->msr_saved_flags |= msr & MSR_SAVE_FLAGS;
+ if (msr & UART_MSR_CTS)
+ break;
+ udelay(1);
+ touch_nmi_watchdog();
+ }
+ }
+}
+
+#ifdef CONFIG_CONSOLE_POLL
+/*
+ * Console polling routines for writing and reading from the uart while
+ * in an interrupt or debug context.
+ */
+
+static int serial8250_get_poll_char(struct uart_port *port)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+ unsigned char lsr;
+ int status;
+
+ serial8250_rpm_get(up);
+
+ lsr = serial_port_in(port, UART_LSR);
+
+ if (!(lsr & UART_LSR_DR)) {
+ status = NO_POLL_CHAR;
+ goto out;
+ }
+
+ status = serial_port_in(port, UART_RX);
+out:
+ serial8250_rpm_put(up);
+ return status;
+}
+
+
+static void serial8250_put_poll_char(struct uart_port *port,
+ unsigned char c)
+{
+ unsigned int ier;
+ struct uart_8250_port *up = up_to_u8250p(port);
+
+ serial8250_rpm_get(up);
+ /*
+ * First save the IER then disable the interrupts
+ */
+ ier = serial_port_in(port, UART_IER);
+ if (up->capabilities & UART_CAP_UUE)
+ serial_port_out(port, UART_IER, UART_IER_UUE);
+ else
+ serial_port_out(port, UART_IER, 0);
+
+ wait_for_xmitr(up, BOTH_EMPTY);
+ /*
+ * Send the character out.
+ */
+ serial_port_out(port, UART_TX, c);
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up, BOTH_EMPTY);
+ serial_port_out(port, UART_IER, ier);
+ serial8250_rpm_put(up);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
+int serial8250_do_startup(struct uart_port *port)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+ unsigned long flags;
+ unsigned char lsr, iir;
+ int retval;
+
+ if (!port->fifosize)
+ port->fifosize = uart_config[port->type].fifo_size;
+ if (!up->tx_loadsz)
+ up->tx_loadsz = uart_config[port->type].tx_loadsz;
+ if (!up->capabilities)
+ up->capabilities = uart_config[port->type].flags;
+ up->mcr = 0;
+
+ if (port->iotype != up->cur_iotype)
+ set_io_from_upio(port);
+
+ serial8250_rpm_get(up);
+ if (port->type == PORT_16C950) {
+ /* Wake up and initialize UART */
+ up->acr = 0;
+ serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
+ serial_port_out(port, UART_EFR, UART_EFR_ECB);
+ serial_port_out(port, UART_IER, 0);
+ serial_port_out(port, UART_LCR, 0);
+ serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
+ serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
+ serial_port_out(port, UART_EFR, UART_EFR_ECB);
+ serial_port_out(port, UART_LCR, 0);
+ }
+
+#ifdef CONFIG_SERIAL_8250_RSA
+ /*
+ * If this is an RSA port, see if we can kick it up to the
+ * higher speed clock.
+ */
+ enable_rsa(up);
+#endif
+
+ if (port->type == PORT_XR17V35X) {
+ /*
+ * First enable access to IER [7:5], ISR [5:4], FCR [5:4],
+ * MCR [7:5] and MSR [7:0]
+ */
+ serial_port_out(port, UART_XR_EFR, UART_EFR_ECB);
+
+ /*
+ * Make sure all interrups are masked until initialization is
+ * complete and the FIFOs are cleared
+ */
+ serial_port_out(port, UART_IER, 0);
+ }
+
+ /*
+ * Clear the FIFO buffers and disable them.
+ * (they will be reenabled in set_termios())
+ */
+ serial8250_clear_fifos(up);
+
+ /*
+ * Clear the interrupt registers.
+ */
+ serial_port_in(port, UART_LSR);
+ serial_port_in(port, UART_RX);
+ serial_port_in(port, UART_IIR);
+ serial_port_in(port, UART_MSR);
+
+ /*
+ * At this point, there's no way the LSR could still be 0xff;
+ * if it is, then bail out, because there's likely no UART
+ * here.
+ */
+ if (!(port->flags & UPF_BUGGY_UART) &&
+ (serial_port_in(port, UART_LSR) == 0xff)) {
+ printk_ratelimited(KERN_INFO "ttyS%d: LSR safety check engaged!\n",
+ serial_index(port));
+ retval = -ENODEV;
+ goto out;
+ }
+
+ /*
+ * For a XR16C850, we need to set the trigger levels
+ */
+ if (port->type == PORT_16850) {
+ unsigned char fctr;
+
+ serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
+
+ fctr = serial_in(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX);
+ serial_port_out(port, UART_FCTR,
+ fctr | UART_FCTR_TRGD | UART_FCTR_RX);
+ serial_port_out(port, UART_TRG, UART_TRG_96);
+ serial_port_out(port, UART_FCTR,
+ fctr | UART_FCTR_TRGD | UART_FCTR_TX);
+ serial_port_out(port, UART_TRG, UART_TRG_96);
+
+ serial_port_out(port, UART_LCR, 0);
+ }
+
+ if (port->irq) {
+ unsigned char iir1;
+ /*
+ * Test for UARTs that do not reassert THRE when the
+ * transmitter is idle and the interrupt has already
+ * been cleared. Real 16550s should always reassert
+ * this interrupt whenever the transmitter is idle and
+ * the interrupt is enabled. Delays are necessary to
+ * allow register changes to become visible.
+ */
+ spin_lock_irqsave(&port->lock, flags);
+ if (up->port.irqflags & IRQF_SHARED)
+ disable_irq_nosync(port->irq);
+
+ wait_for_xmitr(up, UART_LSR_THRE);
+ serial_port_out_sync(port, UART_IER, UART_IER_THRI);
+ udelay(1); /* allow THRE to set */
+ iir1 = serial_port_in(port, UART_IIR);
+ serial_port_out(port, UART_IER, 0);
+ serial_port_out_sync(port, UART_IER, UART_IER_THRI);
+ udelay(1); /* allow a working UART time to re-assert THRE */
+ iir = serial_port_in(port, UART_IIR);
+ serial_port_out(port, UART_IER, 0);
+
+ if (port->irqflags & IRQF_SHARED)
+ enable_irq(port->irq);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ /*
+ * If the interrupt is not reasserted, or we otherwise
+ * don't trust the iir, setup a timer to kick the UART
+ * on a regular basis.
+ */
+ if ((!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) ||
+ up->port.flags & UPF_BUG_THRE) {
+ up->bugs |= UART_BUG_THRE;
+ }
+ }
+
+ retval = up->ops->setup_irq(up);
+ if (retval)
+ goto out;
+
+ /*
+ * Now, initialize the UART
+ */
+ serial_port_out(port, UART_LCR, UART_LCR_WLEN8);
+
+ spin_lock_irqsave(&port->lock, flags);
+ if (up->port.flags & UPF_FOURPORT) {
+ if (!up->port.irq)
+ up->port.mctrl |= TIOCM_OUT1;
+ } else
+ /*
+ * Most PC uarts need OUT2 raised to enable interrupts.
+ */
+ if (port->irq)
+ up->port.mctrl |= TIOCM_OUT2;
+
+ serial8250_set_mctrl(port, port->mctrl);
+
+ /* Serial over Lan (SoL) hack:
+ Intel 8257x Gigabit ethernet chips have a
+ 16550 emulation, to be used for Serial Over Lan.
+ Those chips take a longer time than a normal
+ serial device to signalize that a transmission
+ data was queued. Due to that, the above test generally
+ fails. One solution would be to delay the reading of
+ iir. However, this is not reliable, since the timeout
+ is variable. So, let's just don't test if we receive
+ TX irq. This way, we'll never enable UART_BUG_TXEN.
+ */
+ if (up->port.flags & UPF_NO_TXEN_TEST)
+ goto dont_test_tx_en;
+
+ /*
+ * Do a quick test to see if we receive an
+ * interrupt when we enable the TX irq.
+ */
+ serial_port_out(port, UART_IER, UART_IER_THRI);
+ lsr = serial_port_in(port, UART_LSR);
+ iir = serial_port_in(port, UART_IIR);
+ serial_port_out(port, UART_IER, 0);
+
+ if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT) {
+ if (!(up->bugs & UART_BUG_TXEN)) {
+ up->bugs |= UART_BUG_TXEN;
+ pr_debug("ttyS%d - enabling bad tx status workarounds\n",
+ serial_index(port));
+ }
+ } else {
+ up->bugs &= ~UART_BUG_TXEN;
+ }
+
+dont_test_tx_en:
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ /*
+ * Clear the interrupt registers again for luck, and clear the
+ * saved flags to avoid getting false values from polling
+ * routines or the previous session.
+ */
+ serial_port_in(port, UART_LSR);
+ serial_port_in(port, UART_RX);
+ serial_port_in(port, UART_IIR);
+ serial_port_in(port, UART_MSR);
+ up->lsr_saved_flags = 0;
+ up->msr_saved_flags = 0;
+
+ /*
+ * Request DMA channels for both RX and TX.
+ */
+ if (up->dma) {
+ retval = serial8250_request_dma(up);
+ if (retval) {
+ pr_warn_ratelimited("ttyS%d - failed to request DMA\n",
+ serial_index(port));
+ up->dma = NULL;
+ }
+ }
+
+ /*
+ * Set the IER shadow for rx interrupts but defer actual interrupt
+ * enable until after the FIFOs are enabled; otherwise, an already-
+ * active sender can swamp the interrupt handler with "too much work".
+ */
+ up->ier = UART_IER_RLSI | UART_IER_RDI;
+
+ if (port->flags & UPF_FOURPORT) {
+ unsigned int icp;
+ /*
+ * Enable interrupts on the AST Fourport board
+ */
+ icp = (port->iobase & 0xfe0) | 0x01f;
+ outb_p(0x80, icp);
+ inb_p(icp);
+ }
+ retval = 0;
+out:
+ serial8250_rpm_put(up);
+ return retval;
+}
+EXPORT_SYMBOL_GPL(serial8250_do_startup);
+
+static int serial8250_startup(struct uart_port *port)
+{
+ if (port->startup)
+ return port->startup(port);
+ return serial8250_do_startup(port);
+}
+
+void serial8250_do_shutdown(struct uart_port *port)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+ unsigned long flags;
+
+ serial8250_rpm_get(up);
+ /*
+ * Disable interrupts from this port
+ */
+ up->ier = 0;
+ serial_port_out(port, UART_IER, 0);
+
+ if (up->dma)
+ serial8250_release_dma(up);
+
+ spin_lock_irqsave(&port->lock, flags);
+ if (port->flags & UPF_FOURPORT) {
+ /* reset interrupts on the AST Fourport board */
+ inb((port->iobase & 0xfe0) | 0x1f);
+ port->mctrl |= TIOCM_OUT1;
+ } else
+ port->mctrl &= ~TIOCM_OUT2;
+
+ serial8250_set_mctrl(port, port->mctrl);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ /*
+ * Disable break condition and FIFOs
+ */
+ serial_port_out(port, UART_LCR,
+ serial_port_in(port, UART_LCR) & ~UART_LCR_SBC);
+ serial8250_clear_fifos(up);
+
+#ifdef CONFIG_SERIAL_8250_RSA
+ /*
+ * Reset the RSA board back to 115kbps compat mode.
+ */
+ disable_rsa(up);
+#endif
+
+ /*
+ * Read data port to reset things, and then unlink from
+ * the IRQ chain.
+ */
+ serial_port_in(port, UART_RX);
+ serial8250_rpm_put(up);
+
+ up->ops->release_irq(up);
+}
+EXPORT_SYMBOL_GPL(serial8250_do_shutdown);
+
+static void serial8250_shutdown(struct uart_port *port)
+{
+ if (port->shutdown)
+ port->shutdown(port);
+ else
+ serial8250_do_shutdown(port);
+}
+
+/*
+ * XR17V35x UARTs have an extra fractional divisor register (DLD)
+ * Calculate divisor with extra 4-bit fractional portion
+ */
+static unsigned int xr17v35x_get_divisor(struct uart_8250_port *up,
+ unsigned int baud,
+ unsigned int *frac)
+{
+ struct uart_port *port = &up->port;
+ unsigned int quot_16;
+
+ quot_16 = DIV_ROUND_CLOSEST(port->uartclk, baud);
+ *frac = quot_16 & 0x0f;
+
+ return quot_16 >> 4;
+}
+
+static unsigned int serial8250_get_divisor(struct uart_8250_port *up,
+ unsigned int baud,
+ unsigned int *frac)
+{
+ struct uart_port *port = &up->port;
+ unsigned int quot;
+
+ /*
+ * Handle magic divisors for baud rates above baud_base on
+ * SMSC SuperIO chips.
+ *
+ */
+ if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
+ baud == (port->uartclk/4))
+ quot = 0x8001;
+ else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
+ baud == (port->uartclk/8))
+ quot = 0x8002;
+ else if (up->port.type == PORT_XR17V35X)
+ quot = xr17v35x_get_divisor(up, baud, frac);
+ else
+ quot = uart_get_divisor(port, baud);
+
+ /*
+ * Oxford Semi 952 rev B workaround
+ */
+ if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0)
+ quot++;
+
+ return quot;
+}
+
+static unsigned char serial8250_compute_lcr(struct uart_8250_port *up,
+ tcflag_t c_cflag)
+{
+ unsigned char cval;
+
+ switch (c_cflag & CSIZE) {
+ case CS5:
+ cval = UART_LCR_WLEN5;
+ break;
+ case CS6:
+ cval = UART_LCR_WLEN6;
+ break;
+ case CS7:
+ cval = UART_LCR_WLEN7;
+ break;
+ default:
+ case CS8:
+ cval = UART_LCR_WLEN8;
+ break;
+ }
+
+ if (c_cflag & CSTOPB)
+ cval |= UART_LCR_STOP;
+ if (c_cflag & PARENB) {
+ cval |= UART_LCR_PARITY;
+ if (up->bugs & UART_BUG_PARITY)
+ up->fifo_bug = true;
+ }
+ if (!(c_cflag & PARODD))
+ cval |= UART_LCR_EPAR;
+#ifdef CMSPAR
+ if (c_cflag & CMSPAR)
+ cval |= UART_LCR_SPAR;
+#endif
+
+ return cval;
+}
+
+static void serial8250_set_divisor(struct uart_port *port, unsigned int baud,
+ unsigned int quot, unsigned int quot_frac)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+
+ /* Workaround to enable 115200 baud on OMAP1510 internal ports */
+ if (is_omap1510_8250(up)) {
+ if (baud == 115200) {
+ quot = 1;
+ serial_port_out(port, UART_OMAP_OSC_12M_SEL, 1);
+ } else
+ serial_port_out(port, UART_OMAP_OSC_12M_SEL, 0);
+ }
+
+ /*
+ * For NatSemi, switch to bank 2 not bank 1, to avoid resetting EXCR2,
+ * otherwise just set DLAB
+ */
+ if (up->capabilities & UART_NATSEMI)
+ serial_port_out(port, UART_LCR, 0xe0);
+ else
+ serial_port_out(port, UART_LCR, up->lcr | UART_LCR_DLAB);
+
+ serial_dl_write(up, quot);
+
+ /* XR17V35x UARTs have an extra fractional divisor register (DLD) */
+ if (up->port.type == PORT_XR17V35X)
+ serial_port_out(port, 0x2, quot_frac);
+}
+
+static unsigned int
+serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned int tolerance = port->uartclk / 100;
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ * Allow 1% tolerance at the upper limit so uart clks marginally
+ * slower than nominal still match standard baud rates without
+ * causing transmission errors.
+ */
+ return uart_get_baud_rate(port, termios, old,
+ port->uartclk / 16 / 0xffff,
+ (port->uartclk + tolerance) / 16);
+}
+
+void
+serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+ unsigned char cval;
+ unsigned long flags;
+ unsigned int baud, quot, frac = 0;
+
+ cval = serial8250_compute_lcr(up, termios->c_cflag);
+
+ baud = serial8250_get_baud_rate(port, termios, old);
+ quot = serial8250_get_divisor(up, baud, &frac);
+
+ /*
+ * Ok, we're now changing the port state. Do it with
+ * interrupts disabled.
+ */
+ serial8250_rpm_get(up);
+ spin_lock_irqsave(&port->lock, flags);
+
+ up->lcr = cval; /* Save computed LCR */
+
+ if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {
+ /* NOTE: If fifo_bug is not set, a user can set RX_trigger. */
+ if ((baud < 2400 && !up->dma) || up->fifo_bug) {
+ up->fcr &= ~UART_FCR_TRIGGER_MASK;
+ up->fcr |= UART_FCR_TRIGGER_1;
+ }
+ }
+
+ /*
+ * MCR-based auto flow control. When AFE is enabled, RTS will be
+ * deasserted when the receive FIFO contains more characters than
+ * the trigger, or the MCR RTS bit is cleared. In the case where
+ * the remote UART is not using CTS auto flow control, we must
+ * have sufficient FIFO entries for the latency of the remote
+ * UART to respond. IOW, at least 32 bytes of FIFO.
+ */
+ if (up->capabilities & UART_CAP_AFE && port->fifosize >= 32) {
+ up->mcr &= ~UART_MCR_AFE;
+ if (termios->c_cflag & CRTSCTS)
+ up->mcr |= UART_MCR_AFE;
+ }
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ port->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
+ port->read_status_mask |= UART_LSR_BI;
+
+ /*
+ * Characteres to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= UART_LSR_BI;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART_LSR_OE;
+ }
+
+ /*
+ * ignore all characters if CREAD is not set
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= UART_LSR_DR;
+
+ /*
+ * CTS flow control flag and modem status interrupts
+ */
+ up->ier &= ~UART_IER_MSI;
+ if (!(up->bugs & UART_BUG_NOMSR) &&
+ UART_ENABLE_MS(&up->port, termios->c_cflag))
+ up->ier |= UART_IER_MSI;
+ if (up->capabilities & UART_CAP_UUE)
+ up->ier |= UART_IER_UUE;
+ if (up->capabilities & UART_CAP_RTOIE)
+ up->ier |= UART_IER_RTOIE;
+
+ serial_port_out(port, UART_IER, up->ier);
+
+ if (up->capabilities & UART_CAP_EFR) {
+ unsigned char efr = 0;
+ /*
+ * TI16C752/Startech hardware flow control. FIXME:
+ * - TI16C752 requires control thresholds to be set.
+ * - UART_MCR_RTS is ineffective if auto-RTS mode is enabled.
+ */
+ if (termios->c_cflag & CRTSCTS)
+ efr |= UART_EFR_CTS;
+
+ serial_port_out(port, UART_LCR, UART_LCR_CONF_MODE_B);
+ if (port->flags & UPF_EXAR_EFR)
+ serial_port_out(port, UART_XR_EFR, efr);
+ else
+ serial_port_out(port, UART_EFR, efr);
+ }
+
+ serial8250_set_divisor(port, baud, quot, frac);
+
+ /*
+ * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
+ * is written without DLAB set, this mode will be disabled.
+ */
+ if (port->type == PORT_16750)
+ serial_port_out(port, UART_FCR, up->fcr);
+
+ serial_port_out(port, UART_LCR, up->lcr); /* reset DLAB */
+ if (port->type != PORT_16750) {
+ /* emulated UARTs (Lucent Venus 167x) need two steps */
+ if (up->fcr & UART_FCR_ENABLE_FIFO)
+ serial_port_out(port, UART_FCR, UART_FCR_ENABLE_FIFO);
+ serial_port_out(port, UART_FCR, up->fcr); /* set fcr */
+ }
+ serial8250_set_mctrl(port, port->mctrl);
+ spin_unlock_irqrestore(&port->lock, flags);
+ serial8250_rpm_put(up);
+
+ /* Don't rewrite B0 */
+ if (tty_termios_baud_rate(termios))
+ tty_termios_encode_baud_rate(termios, baud, baud);
+}
+EXPORT_SYMBOL(serial8250_do_set_termios);
+
+static void
+serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ if (port->set_termios)
+ port->set_termios(port, termios, old);
+ else
+ serial8250_do_set_termios(port, termios, old);
+}
+
+static void
+serial8250_set_ldisc(struct uart_port *port, struct ktermios *termios)
+{
+ if (termios->c_line == N_PPS) {
+ port->flags |= UPF_HARDPPS_CD;
+ spin_lock_irq(&port->lock);
+ serial8250_enable_ms(port);
+ spin_unlock_irq(&port->lock);
+ } else {
+ port->flags &= ~UPF_HARDPPS_CD;
+ if (!UART_ENABLE_MS(port, termios->c_cflag)) {
+ spin_lock_irq(&port->lock);
+ serial8250_disable_ms(port);
+ spin_unlock_irq(&port->lock);
+ }
+ }
+}
+
+
+void serial8250_do_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct uart_8250_port *p = up_to_u8250p(port);
+
+ serial8250_set_sleep(p, state != 0);
+}
+EXPORT_SYMBOL(serial8250_do_pm);
+
+static void
+serial8250_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ if (port->pm)
+ port->pm(port, state, oldstate);
+ else
+ serial8250_do_pm(port, state, oldstate);
+}
+
+static unsigned int serial8250_port_size(struct uart_8250_port *pt)
+{
+ if (pt->port.mapsize)
+ return pt->port.mapsize;
+ if (pt->port.iotype == UPIO_AU) {
+ if (pt->port.type == PORT_RT2880)
+ return 0x100;
+ return 0x1000;
+ }
+ if (is_omap1_8250(pt))
+ return 0x16 << pt->port.regshift;
+
+ return 8 << pt->port.regshift;
+}
+
+/*
+ * Resource handling.
+ */
+static int serial8250_request_std_resource(struct uart_8250_port *up)
+{
+ unsigned int size = serial8250_port_size(up);
+ struct uart_port *port = &up->port;
+ int ret = 0;
+
+ switch (port->iotype) {
+ case UPIO_AU:
+ case UPIO_TSI:
+ case UPIO_MEM32:
+ case UPIO_MEM32BE:
+ case UPIO_MEM:
+ if (!port->mapbase)
+ break;
+
+ if (!request_mem_region(port->mapbase, size, "serial")) {
+ ret = -EBUSY;
+ break;
+ }
+
+ if (port->flags & UPF_IOREMAP) {
+ port->membase = ioremap_nocache(port->mapbase, size);
+ if (!port->membase) {
+ release_mem_region(port->mapbase, size);
+ ret = -ENOMEM;
+ }
+ }
+ break;
+
+ case UPIO_HUB6:
+ case UPIO_PORT:
+ if (!request_region(port->iobase, size, "serial"))
+ ret = -EBUSY;
+ break;
+ }
+ return ret;
+}
+
+static void serial8250_release_std_resource(struct uart_8250_port *up)
+{
+ unsigned int size = serial8250_port_size(up);
+ struct uart_port *port = &up->port;
+
+ switch (port->iotype) {
+ case UPIO_AU:
+ case UPIO_TSI:
+ case UPIO_MEM32:
+ case UPIO_MEM32BE:
+ case UPIO_MEM:
+ if (!port->mapbase)
+ break;
+
+ if (port->flags & UPF_IOREMAP) {
+ iounmap(port->membase);
+ port->membase = NULL;
+ }
+
+ release_mem_region(port->mapbase, size);
+ break;
+
+ case UPIO_HUB6:
+ case UPIO_PORT:
+ release_region(port->iobase, size);
+ break;
+ }
+}
+
+static void serial8250_release_port(struct uart_port *port)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+
+ serial8250_release_std_resource(up);
+}
+
+static int serial8250_request_port(struct uart_port *port)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+
+ return serial8250_request_std_resource(up);
+}
+
+static int fcr_get_rxtrig_bytes(struct uart_8250_port *up)
+{
+ const struct serial8250_config *conf_type = &uart_config[up->port.type];
+ unsigned char bytes;
+
+ bytes = conf_type->rxtrig_bytes[UART_FCR_R_TRIG_BITS(up->fcr)];
+
+ return bytes ? bytes : -EOPNOTSUPP;
+}
+
+static int bytes_to_fcr_rxtrig(struct uart_8250_port *up, unsigned char bytes)
+{
+ const struct serial8250_config *conf_type = &uart_config[up->port.type];
+ int i;
+
+ if (!conf_type->rxtrig_bytes[UART_FCR_R_TRIG_BITS(UART_FCR_R_TRIG_00)])
+ return -EOPNOTSUPP;
+
+ for (i = 1; i < UART_FCR_R_TRIG_MAX_STATE; i++) {
+ if (bytes < conf_type->rxtrig_bytes[i])
+ /* Use the nearest lower value */
+ return (--i) << UART_FCR_R_TRIG_SHIFT;
+ }
+
+ return UART_FCR_R_TRIG_11;
+}
+
+static int do_get_rxtrig(struct tty_port *port)
+{
+ struct uart_state *state = container_of(port, struct uart_state, port);
+ struct uart_port *uport = state->uart_port;
+ struct uart_8250_port *up =
+ container_of(uport, struct uart_8250_port, port);
+
+ if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1)
+ return -EINVAL;
+
+ return fcr_get_rxtrig_bytes(up);
+}
+
+static int do_serial8250_get_rxtrig(struct tty_port *port)
+{
+ int rxtrig_bytes;
+
+ mutex_lock(&port->mutex);
+ rxtrig_bytes = do_get_rxtrig(port);
+ mutex_unlock(&port->mutex);
+
+ return rxtrig_bytes;
+}
+
+static ssize_t serial8250_get_attr_rx_trig_bytes(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct tty_port *port = dev_get_drvdata(dev);
+ int rxtrig_bytes;
+
+ rxtrig_bytes = do_serial8250_get_rxtrig(port);
+ if (rxtrig_bytes < 0)
+ return rxtrig_bytes;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", rxtrig_bytes);
+}
+
+static int do_set_rxtrig(struct tty_port *port, unsigned char bytes)
+{
+ struct uart_state *state = container_of(port, struct uart_state, port);
+ struct uart_port *uport = state->uart_port;
+ struct uart_8250_port *up =
+ container_of(uport, struct uart_8250_port, port);
+ int rxtrig;
+
+ if (!(up->capabilities & UART_CAP_FIFO) || uport->fifosize <= 1 ||
+ up->fifo_bug)
+ return -EINVAL;
+
+ rxtrig = bytes_to_fcr_rxtrig(up, bytes);
+ if (rxtrig < 0)
+ return rxtrig;
+
+ serial8250_clear_fifos(up);
+ up->fcr &= ~UART_FCR_TRIGGER_MASK;
+ up->fcr |= (unsigned char)rxtrig;
+ serial_out(up, UART_FCR, up->fcr);
+ return 0;
+}
+
+static int do_serial8250_set_rxtrig(struct tty_port *port, unsigned char bytes)
+{
+ int ret;
+
+ mutex_lock(&port->mutex);
+ ret = do_set_rxtrig(port, bytes);
+ mutex_unlock(&port->mutex);
+
+ return ret;
+}
+
+static ssize_t serial8250_set_attr_rx_trig_bytes(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct tty_port *port = dev_get_drvdata(dev);
+ unsigned char bytes;
+ int ret;
+
+ if (!count)
+ return -EINVAL;
+
+ ret = kstrtou8(buf, 10, &bytes);
+ if (ret < 0)
+ return ret;
+
+ ret = do_serial8250_set_rxtrig(port, bytes);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR(rx_trig_bytes, S_IRUSR | S_IWUSR | S_IRGRP,
+ serial8250_get_attr_rx_trig_bytes,
+ serial8250_set_attr_rx_trig_bytes);
+
+static struct attribute *serial8250_dev_attrs[] = {
+ &dev_attr_rx_trig_bytes.attr,
+ NULL,
+ };
+
+static struct attribute_group serial8250_dev_attr_group = {
+ .attrs = serial8250_dev_attrs,
+ };
+
+static void register_dev_spec_attr_grp(struct uart_8250_port *up)
+{
+ const struct serial8250_config *conf_type = &uart_config[up->port.type];
+
+ if (conf_type->rxtrig_bytes[0])
+ up->port.attr_group = &serial8250_dev_attr_group;
+}
+
+static void serial8250_config_port(struct uart_port *port, int flags)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+ int ret;
+
+ /*
+ * Find the region that we can probe for. This in turn
+ * tells us whether we can probe for the type of port.
+ */
+ ret = serial8250_request_std_resource(up);
+ if (ret < 0)
+ return;
+
+ if (port->iotype != up->cur_iotype)
+ set_io_from_upio(port);
+
+ if (flags & UART_CONFIG_TYPE)
+ autoconfig(up);
+
+ /* if access method is AU, it is a 16550 with a quirk */
+ if (port->type == PORT_16550A && port->iotype == UPIO_AU)
+ up->bugs |= UART_BUG_NOMSR;
+
+ /* HW bugs may trigger IRQ while IIR == NO_INT */
+ if (port->type == PORT_TEGRA)
+ up->bugs |= UART_BUG_NOMSR;
+
+ if (port->type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
+ autoconfig_irq(up);
+
+ if (port->type == PORT_UNKNOWN)
+ serial8250_release_std_resource(up);
+
+ /* Fixme: probably not the best place for this */
+ if ((port->type == PORT_XR17V35X) ||
+ (port->type == PORT_XR17D15X))
+ port->handle_irq = exar_handle_irq;
+
+ register_dev_spec_attr_grp(up);
+ up->fcr = uart_config[up->port.type].fcr;
+}
+
+static int
+serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ if (ser->irq >= nr_irqs || ser->irq < 0 ||
+ ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
+ ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS ||
+ ser->type == PORT_STARTECH)
+ return -EINVAL;
+ return 0;
+}
+
+static const char *
+serial8250_type(struct uart_port *port)
+{
+ int type = port->type;
+
+ if (type >= ARRAY_SIZE(uart_config))
+ type = 0;
+ return uart_config[type].name;
+}
+
+static const struct uart_ops serial8250_pops = {
+ .tx_empty = serial8250_tx_empty,
+ .set_mctrl = serial8250_set_mctrl,
+ .get_mctrl = serial8250_get_mctrl,
+ .stop_tx = serial8250_stop_tx,
+ .start_tx = serial8250_start_tx,
+ .throttle = serial8250_throttle,
+ .unthrottle = serial8250_unthrottle,
+ .stop_rx = serial8250_stop_rx,
+ .enable_ms = serial8250_enable_ms,
+ .break_ctl = serial8250_break_ctl,
+ .startup = serial8250_startup,
+ .shutdown = serial8250_shutdown,
+ .set_termios = serial8250_set_termios,
+ .set_ldisc = serial8250_set_ldisc,
+ .pm = serial8250_pm,
+ .type = serial8250_type,
+ .release_port = serial8250_release_port,
+ .request_port = serial8250_request_port,
+ .config_port = serial8250_config_port,
+ .verify_port = serial8250_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = serial8250_get_poll_char,
+ .poll_put_char = serial8250_put_poll_char,
+#endif
+};
+
+void serial8250_init_port(struct uart_8250_port *up)
+{
+ struct uart_port *port = &up->port;
+
+ spin_lock_init(&port->lock);
+ port->ops = &serial8250_pops;
+
+ up->cur_iotype = 0xFF;
+}
+EXPORT_SYMBOL_GPL(serial8250_init_port);
+
+void serial8250_set_defaults(struct uart_8250_port *up)
+{
+ struct uart_port *port = &up->port;
+
+ if (up->port.flags & UPF_FIXED_TYPE) {
+ unsigned int type = up->port.type;
+
+ if (!up->port.fifosize)
+ up->port.fifosize = uart_config[type].fifo_size;
+ if (!up->tx_loadsz)
+ up->tx_loadsz = uart_config[type].tx_loadsz;
+ if (!up->capabilities)
+ up->capabilities = uart_config[type].flags;
+ }
+
+ set_io_from_upio(port);
+
+ /* default dma handlers */
+ if (up->dma) {
+ if (!up->dma->tx_dma)
+ up->dma->tx_dma = serial8250_tx_dma;
+ if (!up->dma->rx_dma)
+ up->dma->rx_dma = serial8250_rx_dma;
+ }
+}
+EXPORT_SYMBOL_GPL(serial8250_set_defaults);
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+
+static void serial8250_console_putchar(struct uart_port *port, int ch)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+
+ wait_for_xmitr(up, UART_LSR_THRE);
+ serial_port_out(port, UART_TX, ch);
+}
+
+/*
+ * Restore serial console when h/w power-off detected
+ */
+static void serial8250_console_restore(struct uart_8250_port *up)
+{
+ struct uart_port *port = &up->port;
+ struct ktermios termios;
+ unsigned int baud, quot, frac = 0;
+
+ termios.c_cflag = port->cons->cflag;
+ if (port->state->port.tty && termios.c_cflag == 0)
+ termios.c_cflag = port->state->port.tty->termios.c_cflag;
+
+ baud = serial8250_get_baud_rate(port, &termios, NULL);
+ quot = serial8250_get_divisor(up, baud, &frac);
+
+ serial8250_set_divisor(port, baud, quot, frac);
+ serial_port_out(port, UART_LCR, up->lcr);
+ serial_port_out(port, UART_MCR, UART_MCR_DTR | UART_MCR_RTS);
+}
+
+/*
+ * Print a string to the serial port trying not to disturb
+ * any possible real use of the port...
+ *
+ * The console_lock must be held when we get here.
+ */
+void serial8250_console_write(struct uart_8250_port *up, const char *s,
+ unsigned int count)
+{
+ struct uart_port *port = &up->port;
+ unsigned long flags;
+ unsigned int ier;
+ int locked = 1;
+
+ touch_nmi_watchdog();
+
+ serial8250_rpm_get(up);
+
+ if (port->sysrq)
+ locked = 0;
+ else if (oops_in_progress || in_kdb_printk())
+ locked = spin_trylock_irqsave(&port->lock, flags);
+ else
+ spin_lock_irqsave(&port->lock, flags);
+
+ /*
+ * First save the IER then disable the interrupts
+ */
+ ier = serial_port_in(port, UART_IER);
+
+ if (up->capabilities & UART_CAP_UUE)
+ serial_port_out(port, UART_IER, UART_IER_UUE);
+ else
+ serial_port_out(port, UART_IER, 0);
+
+ /* check scratch reg to see if port powered off during system sleep */
+ if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) {
+ serial8250_console_restore(up);
+ up->canary = 0;
+ }
+
+ uart_console_write(port, s, count, serial8250_console_putchar);
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore the IER
+ */
+ wait_for_xmitr(up, BOTH_EMPTY);
+ serial_port_out(port, UART_IER, ier);
+
+ /*
+ * The receive handling will happen properly because the
+ * receive ready bit will still be set; it is not cleared
+ * on read. However, modem control will not, we must
+ * call it if we have saved something in the saved flags
+ * while processing with interrupts off.
+ */
+ if (up->msr_saved_flags)
+ serial8250_modem_status(up);
+
+ if (locked)
+ spin_unlock_irqrestore(&port->lock, flags);
+ serial8250_rpm_put(up);
+}
+
+static unsigned int probe_baud(struct uart_port *port)
+{
+ unsigned char lcr, dll, dlm;
+ unsigned int quot;
+
+ lcr = serial_port_in(port, UART_LCR);
+ serial_port_out(port, UART_LCR, lcr | UART_LCR_DLAB);
+ dll = serial_port_in(port, UART_DLL);
+ dlm = serial_port_in(port, UART_DLM);
+ serial_port_out(port, UART_LCR, lcr);
+
+ quot = (dlm << 8) | dll;
+ return (port->uartclk / 16) / quot;
+}
+
+int serial8250_console_setup(struct uart_port *port, char *options, bool probe)
+{
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (!port->iobase && !port->membase)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else if (probe)
+ baud = probe_baud(port);
+
+ return uart_set_options(port, port->cons, baud, parity, bits, flow);
+}
+
+#endif /* CONFIG_SERIAL_8250_CONSOLE */
+
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/tty/serial/8250/8250_uniphier.c b/kernel/drivers/tty/serial/8250/8250_uniphier.c
new file mode 100644
index 000000000..245edbb68
--- /dev/null
+++ b/kernel/drivers/tty/serial/8250/8250_uniphier.c
@@ -0,0 +1,262 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "8250.h"
+
+/* Most (but not all) of UniPhier UART devices have 64-depth FIFO. */
+#define UNIPHIER_UART_DEFAULT_FIFO_SIZE 64
+
+#define UNIPHIER_UART_CHAR_FCR 3 /* Character / FIFO Control Register */
+#define UNIPHIER_UART_LCR_MCR 4 /* Line/Modem Control Register */
+#define UNIPHIER_UART_LCR_SHIFT 8
+#define UNIPHIER_UART_DLR 9 /* Divisor Latch Register */
+
+struct uniphier8250_priv {
+ int line;
+ struct clk *clk;
+ spinlock_t atomic_write_lock;
+};
+
+/*
+ * The register map is slightly different from that of 8250.
+ * IO callbacks must be overridden for correct access to FCR, LCR, and MCR.
+ */
+static unsigned int uniphier_serial_in(struct uart_port *p, int offset)
+{
+ unsigned int valshift = 0;
+
+ switch (offset) {
+ case UART_LCR:
+ valshift = UNIPHIER_UART_LCR_SHIFT;
+ /* fall through */
+ case UART_MCR:
+ offset = UNIPHIER_UART_LCR_MCR;
+ break;
+ default:
+ break;
+ }
+
+ offset <<= p->regshift;
+
+ /*
+ * The return value must be masked with 0xff because LCR and MCR reside
+ * in the same register that must be accessed by 32-bit write/read.
+ * 8 or 16 bit access to this hardware result in unexpected behavior.
+ */
+ return (readl(p->membase + offset) >> valshift) & 0xff;
+}
+
+static void uniphier_serial_out(struct uart_port *p, int offset, int value)
+{
+ unsigned int valshift = 0;
+ bool normal = false;
+
+ switch (offset) {
+ case UART_FCR:
+ offset = UNIPHIER_UART_CHAR_FCR;
+ break;
+ case UART_LCR:
+ valshift = UNIPHIER_UART_LCR_SHIFT;
+ /* Divisor latch access bit does not exist. */
+ value &= ~(UART_LCR_DLAB << valshift);
+ /* fall through */
+ case UART_MCR:
+ offset = UNIPHIER_UART_LCR_MCR;
+ break;
+ default:
+ normal = true;
+ break;
+ }
+
+ offset <<= p->regshift;
+
+ if (normal) {
+ writel(value, p->membase + offset);
+ } else {
+ /*
+ * Special case: two registers share the same address that
+ * must be 32-bit accessed. As this is not longer atomic safe,
+ * take a lock just in case.
+ */
+ struct uniphier8250_priv *priv = p->private_data;
+ unsigned long flags;
+ u32 tmp;
+
+ spin_lock_irqsave(&priv->atomic_write_lock, flags);
+ tmp = readl(p->membase + offset);
+ tmp &= ~(0xff << valshift);
+ tmp |= value << valshift;
+ writel(tmp, p->membase + offset);
+ spin_unlock_irqrestore(&priv->atomic_write_lock, flags);
+ }
+}
+
+/*
+ * This hardware does not have the divisor latch access bit.
+ * The divisor latch register exists at different address.
+ * Override dl_read/write callbacks.
+ */
+static int uniphier_serial_dl_read(struct uart_8250_port *up)
+{
+ int offset = UNIPHIER_UART_DLR << up->port.regshift;
+
+ return readl(up->port.membase + offset);
+}
+
+static void uniphier_serial_dl_write(struct uart_8250_port *up, int value)
+{
+ int offset = UNIPHIER_UART_DLR << up->port.regshift;
+
+ writel(value, up->port.membase + offset);
+}
+
+static int uniphier_of_serial_setup(struct device *dev, struct uart_port *port,
+ struct uniphier8250_priv *priv)
+{
+ int ret;
+ u32 prop;
+ struct device_node *np = dev->of_node;
+
+ ret = of_alias_get_id(np, "serial");
+ if (ret < 0) {
+ dev_err(dev, "failed to get alias id\n");
+ return ret;
+ }
+ port->line = priv->line = ret;
+
+ /* Get clk rate through clk driver */
+ priv->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(priv->clk)) {
+ dev_err(dev, "failed to get clock\n");
+ return PTR_ERR(priv->clk);
+ }
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret < 0)
+ return ret;
+
+ port->uartclk = clk_get_rate(priv->clk);
+
+ /* Check for fifo size */
+ if (of_property_read_u32(np, "fifo-size", &prop) == 0)
+ port->fifosize = prop;
+ else
+ port->fifosize = UNIPHIER_UART_DEFAULT_FIFO_SIZE;
+
+ return 0;
+}
+
+static int uniphier_uart_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct uart_8250_port up;
+ struct uniphier8250_priv *priv;
+ struct resource *regs;
+ void __iomem *membase;
+ int irq;
+ int ret;
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!regs) {
+ dev_err(dev, "failed to get memory resource");
+ return -EINVAL;
+ }
+
+ membase = devm_ioremap(dev, regs->start, resource_size(regs));
+ if (!membase)
+ return -ENOMEM;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(dev, "failed to get IRQ number");
+ return irq;
+ }
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ memset(&up, 0, sizeof(up));
+
+ ret = uniphier_of_serial_setup(dev, &up.port, priv);
+ if (ret < 0)
+ return ret;
+
+ spin_lock_init(&priv->atomic_write_lock);
+
+ up.port.dev = dev;
+ up.port.private_data = priv;
+ up.port.mapbase = regs->start;
+ up.port.mapsize = resource_size(regs);
+ up.port.membase = membase;
+ up.port.irq = irq;
+
+ up.port.type = PORT_16550A;
+ up.port.iotype = UPIO_MEM32;
+ up.port.regshift = 2;
+ up.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE;
+ up.capabilities = UART_CAP_FIFO;
+
+ up.port.serial_in = uniphier_serial_in;
+ up.port.serial_out = uniphier_serial_out;
+ up.dl_read = uniphier_serial_dl_read;
+ up.dl_write = uniphier_serial_dl_write;
+
+ ret = serial8250_register_8250_port(&up);
+ if (ret < 0) {
+ dev_err(dev, "failed to register 8250 port\n");
+ clk_disable_unprepare(priv->clk);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, priv);
+
+ return 0;
+}
+
+static int uniphier_uart_remove(struct platform_device *pdev)
+{
+ struct uniphier8250_priv *priv = platform_get_drvdata(pdev);
+
+ serial8250_unregister_port(priv->line);
+ clk_disable_unprepare(priv->clk);
+
+ return 0;
+}
+
+static const struct of_device_id uniphier_uart_match[] = {
+ { .compatible = "socionext,uniphier-uart" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, uniphier_uart_match);
+
+static struct platform_driver uniphier_uart_platform_driver = {
+ .probe = uniphier_uart_probe,
+ .remove = uniphier_uart_remove,
+ .driver = {
+ .name = "uniphier-uart",
+ .of_match_table = uniphier_uart_match,
+ },
+};
+module_platform_driver(uniphier_uart_platform_driver);
+
+MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>");
+MODULE_DESCRIPTION("UniPhier UART driver");
+MODULE_LICENSE("GPL");
diff --git a/kernel/drivers/tty/serial/8250/Kconfig b/kernel/drivers/tty/serial/8250/Kconfig
index c35070356..6412f1455 100644
--- a/kernel/drivers/tty/serial/8250/Kconfig
+++ b/kernel/drivers/tty/serial/8250/Kconfig
@@ -274,8 +274,8 @@ config SERIAL_8250_ACORN
config SERIAL_8250_FSL
bool
- depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550
- default PPC
+ depends on SERIAL_8250_CONSOLE
+ default PPC || ARM || ARM64
config SERIAL_8250_DW
tristate "Support for Synopsys DesignWare 8250 quirks"
@@ -294,11 +294,12 @@ config SERIAL_8250_EM
config SERIAL_8250_RT288X
bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
- depends on SERIAL_8250 && (SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620)
+ depends on SERIAL_8250
+ default y if MIPS_ALCHEMY || SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620
help
- If you have a Ralink RT288x/RT305x SoC based board and want to use the
- serial port, say Y to this option. The driver can handle up to 2 serial
- ports. If unsure, say N.
+ Selecting this option will add support for the alternate register
+ layout used by Ralink RT288x/RT305x, Alchemy Au1xxx, and some others.
+ If unsure, say N.
config SERIAL_8250_OMAP
tristate "Support for OMAP internal UART (8250 based driver)"
@@ -336,9 +337,44 @@ config SERIAL_8250_FINTEK
LPC to 4 UART. This device has some RS485 functionality not available
through the PNP driver. If unsure, say N.
+config SERIAL_8250_LPC18XX
+ tristate "NXP LPC18xx/43xx serial port support"
+ depends on SERIAL_8250 && OF && (ARCH_LPC18XX || COMPILE_TEST)
+ default ARCH_LPC18XX
+ help
+ If you have a LPC18xx/43xx based board and want to use the
+ serial port, say Y to this option. If unsure, say Y.
+
config SERIAL_8250_MT6577
bool "Mediatek serial port support"
depends on SERIAL_8250 && ARCH_MEDIATEK
help
If you have a Mediatek based board and want to use the
serial port, say Y to this option. If unsure, say N.
+
+config SERIAL_8250_UNIPHIER
+ tristate "Support for UniPhier on-chip UART"
+ depends on SERIAL_8250 && ARCH_UNIPHIER
+ help
+ If you have a UniPhier based board and want to use the on-chip
+ serial ports, say Y to this option. If unsure, say N.
+
+config SERIAL_8250_INGENIC
+ bool "Support for Ingenic SoC serial ports"
+ depends on SERIAL_8250_CONSOLE && OF_FLATTREE
+ select LIBFDT
+ select SERIAL_EARLYCON
+ help
+ If you have a system using an Ingenic SoC and wish to make use of
+ its UARTs, say Y to this option. If unsure, say N.
+
+config SERIAL_8250_MID
+ tristate "Support for serial ports on Intel MID platforms"
+ depends on SERIAL_8250 && PCI
+ select HSU_DMA if SERIAL_8250_DMA
+ select HSU_DMA_PCI if X86_INTEL_MID
+ select RATIONAL
+ help
+ Selecting this option will enable handling of the extra features
+ present on the UART found on Intel Medfield SOC and various other
+ Intel platforms.
diff --git a/kernel/drivers/tty/serial/8250/Makefile b/kernel/drivers/tty/serial/8250/Makefile
index 31e7cdc68..e177f8681 100644
--- a/kernel/drivers/tty/serial/8250/Makefile
+++ b/kernel/drivers/tty/serial/8250/Makefile
@@ -2,10 +2,11 @@
# Makefile for the 8250 serial device drivers.
#
-obj-$(CONFIG_SERIAL_8250) += 8250.o
+obj-$(CONFIG_SERIAL_8250) += 8250.o 8250_base.o
8250-y := 8250_core.o
8250-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o
-8250-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o
+8250_base-y := 8250_port.o
+8250_base-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o
obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o
obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o
obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o
@@ -22,4 +23,10 @@ obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o
obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o
obj-$(CONFIG_SERIAL_8250_OMAP) += 8250_omap.o
obj-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o
+obj-$(CONFIG_SERIAL_8250_LPC18XX) += 8250_lpc18xx.o
obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o
+obj-$(CONFIG_SERIAL_8250_UNIPHIER) += 8250_uniphier.o
+obj-$(CONFIG_SERIAL_8250_INGENIC) += 8250_ingenic.o
+obj-$(CONFIG_SERIAL_8250_MID) += 8250_mid.o
+
+CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt
diff --git a/kernel/drivers/tty/serial/Kconfig b/kernel/drivers/tty/serial/Kconfig
index 8cd35348f..f38beb28e 100644
--- a/kernel/drivers/tty/serial/Kconfig
+++ b/kernel/drivers/tty/serial/Kconfig
@@ -115,9 +115,9 @@ config SERIAL_SB1250_DUART_CONSOLE
config SERIAL_ATMEL
bool "AT91 / AT32 on-chip serial port support"
- depends on ARCH_AT91 || AVR32
+ depends on ARCH_AT91 || AVR32 || COMPILE_TEST
select SERIAL_CORE
- select SERIAL_MCTRL_GPIO
+ select SERIAL_MCTRL_GPIO if GPIOLIB
help
This enables the driver for the on-chip UARTs of the Atmel
AT91 and AT32 processors.
@@ -571,7 +571,7 @@ config BFIN_UART3_CTSRTS
config SERIAL_IMX
tristate "IMX serial port support"
- depends on ARCH_MXC
+ depends on ARCH_MXC || COMPILE_TEST
select SERIAL_CORE
select RATIONAL
help
@@ -582,6 +582,7 @@ config SERIAL_IMX_CONSOLE
bool "Console on IMX serial port"
depends on SERIAL_IMX=y
select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON if OF
help
If you have enabled the serial port on the Freescale IMX
CPU you can make it the console by answering Y to this option.
@@ -594,7 +595,7 @@ config SERIAL_IMX_CONSOLE
config SERIAL_UARTLITE
tristate "Xilinx uartlite serial port support"
- depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE || ARCH_ZYNQ
+ depends on HAS_IOMEM
select SERIAL_CORE
help
Say Y here if you want to use the Xilinx uartlite serial controller.
@@ -728,7 +729,7 @@ config SERIAL_IP22_ZILOG_CONSOLE
config SERIAL_SH_SCI
tristate "SuperH SCI(F) serial port support"
- depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
+ depends on SUPERH || ARCH_SHMOBILE || H8300 || COMPILE_TEST
select SERIAL_CORE
config SERIAL_SH_SCI_NR_UARTS
@@ -743,7 +744,7 @@ config SERIAL_SH_SCI_CONSOLE
config SERIAL_SH_SCI_DMA
bool "DMA support"
- depends on SERIAL_SH_SCI && SH_DMAE
+ depends on SERIAL_SH_SCI && DMA_ENGINE
config SERIAL_PNX8XXX
bool "Enable PNX8XXX SoCs' UART Support"
@@ -1067,6 +1068,7 @@ config SERIAL_ETRAXFS
bool "ETRAX FS serial port support"
depends on ETRAX_ARCH_V32 && OF
select SERIAL_CORE
+ select SERIAL_MCTRL_GPIO if GPIOLIB
config SERIAL_ETRAXFS_CONSOLE
bool "ETRAX FS serial console support"
@@ -1179,15 +1181,42 @@ config SERIAL_SCCNXP_CONSOLE
help
Support for console on SCCNXP serial ports.
+config SERIAL_SC16IS7XX_CORE
+ tristate
+
config SERIAL_SC16IS7XX
- tristate "SC16IS7xx serial support"
- depends on I2C
- select SERIAL_CORE
- select REGMAP_I2C if I2C
- help
- This selects support for SC16IS7xx serial ports.
- Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752,
- SC16IS760 and SC16IS762.
+ tristate "SC16IS7xx serial support"
+ select SERIAL_CORE
+ depends on (SPI_MASTER && !I2C) || I2C
+ help
+ This selects support for SC16IS7xx serial ports.
+ Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752,
+ SC16IS760 and SC16IS762. Select supported buses using options below.
+
+config SERIAL_SC16IS7XX_I2C
+ bool "SC16IS7xx for I2C interface"
+ depends on SERIAL_SC16IS7XX
+ depends on I2C
+ select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
+ select REGMAP_I2C if I2C
+ default y
+ help
+ Enable SC16IS7xx driver on I2C bus,
+ If required say y, and say n to i2c if not required,
+ Enabled by default to support oldconfig.
+ You must select at least one bus for the driver to be built.
+
+config SERIAL_SC16IS7XX_SPI
+ bool "SC16IS7xx for spi interface"
+ depends on SERIAL_SC16IS7XX
+ depends on SPI_MASTER
+ select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
+ select REGMAP_SPI if SPI_MASTER
+ help
+ Enable SC16IS7xx driver on SPI bus,
+ If required say y, and say n to spi if not required,
+ This is additional support to exsisting driver.
+ You must select at least one bus for the driver to be built.
config SERIAL_BFIN_SPORT
tristate "Blackfin SPORT emulate UART"
@@ -1349,7 +1378,8 @@ config SERIAL_ALTERA_UART_CONSOLE
config SERIAL_IFX6X60
tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)"
- depends on GPIOLIB && SPI
+ depends on GPIOLIB || COMPILE_TEST
+ depends on SPI && HAS_DMA
help
Support for the IFX6x60 modem devices on Intel MID platforms.
@@ -1378,16 +1408,8 @@ config SERIAL_PCH_UART_CONSOLE
(the system console is the device which receives all kernel messages and
warnings and which allows logins in single user mode).
-config SERIAL_MSM_SMD
- bool "Enable tty device interface for some SMD ports"
- default n
- depends on MSM_SMD
- help
- Enables userspace clients to read and write to some streaming SMD
- ports via tty device interface for MSM chipset.
-
config SERIAL_MXS_AUART
- depends on ARCH_MXS
+ depends on ARCH_MXS || COMPILE_TEST
tristate "MXS AUART support"
select SERIAL_CORE
select SERIAL_MCTRL_GPIO if GPIOLIB
@@ -1524,6 +1546,7 @@ config SERIAL_FSL_LPUART_CONSOLE
bool "Console on Freescale lpuart serial port"
depends on SERIAL_FSL_LPUART=y
select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
help
If you have enabled the lpuart serial port on the Freescale SoCs,
you can make it the console by answering Y to this option.
@@ -1589,6 +1612,23 @@ config SERIAL_SPRD_CONSOLE
with "earlycon" on the kernel command line. The console is
enabled when early_param is processed.
+config SERIAL_STM32
+ tristate "STMicroelectronics STM32 serial port support"
+ select SERIAL_CORE
+ depends on ARM || COMPILE_TEST
+ help
+ This driver is for the on-chip Serial Controller on
+ STMicroelectronics STM32 MCUs.
+ USART supports Rx & Tx functionality.
+ It support all industry standard baud rates.
+
+ If unsure, say N.
+
+config SERIAL_STM32_CONSOLE
+ bool "Support for console on STM32"
+ depends on SERIAL_STM32=y
+ select SERIAL_CORE_CONSOLE
+
endmenu
config SERIAL_MCTRL_GPIO
diff --git a/kernel/drivers/tty/serial/Makefile b/kernel/drivers/tty/serial/Makefile
index c3ac3d930..5ab41119b 100644
--- a/kernel/drivers/tty/serial/Makefile
+++ b/kernel/drivers/tty/serial/Makefile
@@ -53,7 +53,7 @@ obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o
obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o
obj-$(CONFIG_SERIAL_ETRAXFS) += etraxfs-uart.o
obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o
-obj-$(CONFIG_SERIAL_SC16IS7XX) += sc16is7xx.o
+obj-$(CONFIG_SERIAL_SC16IS7XX_CORE) += sc16is7xx.o
obj-$(CONFIG_SERIAL_JSM) += jsm/
obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
@@ -79,7 +79,6 @@ obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o
obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o
obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o
-obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o
obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o
obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
@@ -93,6 +92,7 @@ obj-$(CONFIG_SERIAL_FSL_LPUART) += fsl_lpuart.o
obj-$(CONFIG_SERIAL_CONEXANT_DIGICOLOR) += digicolor-usart.o
obj-$(CONFIG_SERIAL_MEN_Z135) += men_z135_uart.o
obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o
+obj-$(CONFIG_SERIAL_STM32) += stm32-usart.o
# GPIOLIB helpers for modem control lines
obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o
diff --git a/kernel/drivers/tty/serial/altera_jtaguart.c b/kernel/drivers/tty/serial/altera_jtaguart.c
index 0fefdd893..32df2a0cb 100644
--- a/kernel/drivers/tty/serial/altera_jtaguart.c
+++ b/kernel/drivers/tty/serial/altera_jtaguart.c
@@ -387,7 +387,7 @@ console_initcall(altera_jtaguart_console_init);
#define ALTERA_JTAGUART_CONSOLE NULL
-#endif /* CONFIG_ALTERA_JTAGUART_CONSOLE */
+#endif /* CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE */
static struct uart_driver altera_jtaguart_driver = {
.owner = THIS_MODULE,
diff --git a/kernel/drivers/tty/serial/altera_uart.c b/kernel/drivers/tty/serial/altera_uart.c
index b2859fe07..61b607f24 100644
--- a/kernel/drivers/tty/serial/altera_uart.c
+++ b/kernel/drivers/tty/serial/altera_uart.c
@@ -493,7 +493,7 @@ console_initcall(altera_uart_console_init);
#define ALTERA_UART_CONSOLE NULL
-#endif /* CONFIG_ALTERA_UART_CONSOLE */
+#endif /* CONFIG_SERIAL_ALTERA_UART_CONSOLE */
/*
* Define the altera_uart UART driver structure.
@@ -508,29 +508,6 @@ static struct uart_driver altera_uart_driver = {
.cons = ALTERA_UART_CONSOLE,
};
-#ifdef CONFIG_OF
-static int altera_uart_get_of_uartclk(struct platform_device *pdev,
- struct uart_port *port)
-{
- int len;
- const __be32 *clk;
-
- clk = of_get_property(pdev->dev.of_node, "clock-frequency", &len);
- if (!clk || len < sizeof(__be32))
- return -ENODEV;
-
- port->uartclk = be32_to_cpup(clk);
-
- return 0;
-}
-#else
-static int altera_uart_get_of_uartclk(struct platform_device *pdev,
- struct uart_port *port)
-{
- return -ENODEV;
-}
-#endif /* CONFIG_OF */
-
static int altera_uart_probe(struct platform_device *pdev)
{
struct altera_uart_platform_uart *platp = dev_get_platdata(&pdev->dev);
@@ -570,7 +547,8 @@ static int altera_uart_probe(struct platform_device *pdev)
if (platp)
port->uartclk = platp->uartclk;
else {
- ret = altera_uart_get_of_uartclk(pdev, port);
+ ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+ &port->uartclk);
if (ret)
return ret;
}
diff --git a/kernel/drivers/tty/serial/amba-pl011.c b/kernel/drivers/tty/serial/amba-pl011.c
index 841c42ae1..3ff6363b3 100644
--- a/kernel/drivers/tty/serial/amba-pl011.c
+++ b/kernel/drivers/tty/serial/amba-pl011.c
@@ -58,7 +58,7 @@
#include <linux/pinctrl/consumer.h>
#include <linux/sizes.h>
#include <linux/io.h>
-#include <linux/workqueue.h>
+#include <linux/acpi.h>
#define UART_NR 14
@@ -79,6 +79,8 @@ struct vendor_data {
bool oversampling;
bool dma_threshold;
bool cts_event_workaround;
+ bool always_enabled;
+ bool fixed_options;
unsigned int (*get_fifosize)(struct amba_device *dev);
};
@@ -95,9 +97,19 @@ static struct vendor_data vendor_arm = {
.oversampling = false,
.dma_threshold = false,
.cts_event_workaround = false,
+ .always_enabled = false,
+ .fixed_options = false,
.get_fifosize = get_fifosize_arm,
};
+static struct vendor_data vendor_sbsa = {
+ .oversampling = false,
+ .dma_threshold = false,
+ .cts_event_workaround = false,
+ .always_enabled = true,
+ .fixed_options = true,
+};
+
static unsigned int get_fifosize_st(struct amba_device *dev)
{
return 64;
@@ -110,6 +122,8 @@ static struct vendor_data vendor_st = {
.oversampling = true,
.dma_threshold = true,
.cts_event_workaround = true,
+ .always_enabled = false,
+ .fixed_options = false,
.get_fifosize = get_fifosize_st,
};
@@ -157,9 +171,8 @@ struct uart_amba_port {
unsigned int lcrh_tx; /* vendor-specific */
unsigned int lcrh_rx; /* vendor-specific */
unsigned int old_cr; /* state during shutdown */
- struct delayed_work tx_softirq_work;
bool autorts;
- unsigned int tx_irq_seen; /* 0=none, 1=1, 2=2 or more */
+ unsigned int fixed_baud; /* vendor-set fixed baud rate */
char type[12];
#ifdef CONFIG_DMA_ENGINE
/* DMA stuff */
@@ -178,8 +191,8 @@ struct uart_amba_port {
*/
static int pl011_fifo_to_tty(struct uart_amba_port *uap)
{
- u16 status, ch;
- unsigned int flag, max_count = 256;
+ u16 status;
+ unsigned int ch, flag, max_count = 256;
int fifotaken = 0;
while (max_count--) {
@@ -1172,15 +1185,14 @@ static void pl011_stop_tx(struct uart_port *port)
pl011_dma_tx_stop(uap);
}
-static bool pl011_tx_chars(struct uart_amba_port *uap);
+static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq);
/* Start TX with programmed I/O only (no DMA) */
static void pl011_start_tx_pio(struct uart_amba_port *uap)
{
uap->im |= UART011_TXIM;
writew(uap->im, uap->port.membase + UART011_IMSC);
- if (!uap->tx_irq_seen)
- pl011_tx_chars(uap);
+ pl011_tx_chars(uap, false);
}
static void pl011_start_tx(struct uart_port *port)
@@ -1247,15 +1259,11 @@ __acquires(&uap->port.lock)
spin_lock(&uap->port.lock);
}
-/*
- * Transmit a character
- *
- * Returns true if the character was successfully queued to the FIFO.
- * Returns false otherwise.
- */
-static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c)
+static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c,
+ bool from_irq)
{
- if (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
+ if (unlikely(!from_irq) &&
+ readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)
return false; /* unable to transmit character */
writew(c, uap->port.membase + UART01x_DR);
@@ -1264,70 +1272,41 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c)
return true;
}
-static bool pl011_tx_chars(struct uart_amba_port *uap)
+static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
{
struct circ_buf *xmit = &uap->port.state->xmit;
- int count;
-
- if (unlikely(uap->tx_irq_seen < 2))
- /*
- * Initial FIFO fill level unknown: we must check TXFF
- * after each write, so just try to fill up the FIFO.
- */
- count = uap->fifosize;
- else /* tx_irq_seen >= 2 */
- /*
- * FIFO initially at least half-empty, so we can simply
- * write half the FIFO without polling TXFF.
-
- * Note: the *first* TX IRQ can still race with
- * pl011_start_tx_pio(), which can result in the FIFO
- * being fuller than expected in that case.
- */
- count = uap->fifosize >> 1;
-
- /*
- * If the FIFO is full we're guaranteed a TX IRQ at some later point,
- * and can't transmit immediately in any case:
- */
- if (unlikely(uap->tx_irq_seen < 2 &&
- readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF))
- return false;
+ int count = uap->fifosize >> 1;
if (uap->port.x_char) {
- if (!pl011_tx_char(uap, uap->port.x_char))
- goto done;
+ if (!pl011_tx_char(uap, uap->port.x_char, from_irq))
+ return;
uap->port.x_char = 0;
--count;
}
if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) {
pl011_stop_tx(&uap->port);
- goto done;
+ return;
}
/* If we are using DMA mode, try to send some characters. */
if (pl011_dma_tx_irq(uap))
- goto done;
+ return;
- while (count-- > 0 && pl011_tx_char(uap, xmit->buf[xmit->tail])) {
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- if (uart_circ_empty(xmit))
+ do {
+ if (likely(from_irq) && count-- == 0)
break;
- }
+
+ if (!pl011_tx_char(uap, xmit->buf[xmit->tail], from_irq))
+ break;
+
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ } while (!uart_circ_empty(xmit));
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&uap->port);
- if (uart_circ_empty(xmit)) {
+ if (uart_circ_empty(xmit))
pl011_stop_tx(&uap->port);
- goto done;
- }
-
- if (unlikely(!uap->tx_irq_seen))
- schedule_delayed_work(&uap->tx_softirq_work, uap->port.timeout);
-
-done:
- return false;
}
static void pl011_modem_status(struct uart_amba_port *uap)
@@ -1354,26 +1333,23 @@ static void pl011_modem_status(struct uart_amba_port *uap)
wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
}
-static void pl011_tx_softirq(struct work_struct *work)
+static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
{
- struct delayed_work *dwork = to_delayed_work(work);
- struct uart_amba_port *uap =
- container_of(dwork, struct uart_amba_port, tx_softirq_work);
-
- spin_lock(&uap->port.lock);
- while (pl011_tx_chars(uap)) ;
- spin_unlock(&uap->port.lock);
-}
+ unsigned int dummy_read;
-static void pl011_tx_irq_seen(struct uart_amba_port *uap)
-{
- if (likely(uap->tx_irq_seen > 1))
+ if (!uap->vendor->cts_event_workaround)
return;
- uap->tx_irq_seen++;
- if (uap->tx_irq_seen < 2)
- /* first TX IRQ */
- cancel_delayed_work(&uap->tx_softirq_work);
+ /* workaround to make sure that all bits are unlocked.. */
+ writew(0x00, uap->port.membase + UART011_ICR);
+
+ /*
+ * WA: introduce 26ns(1 uart clk) delay before W1C;
+ * single apb access will incur 2 pclk(133.12Mhz) delay,
+ * so add 2 dummy reads
+ */
+ dummy_read = readw(uap->port.membase + UART011_ICR);
+ dummy_read = readw(uap->port.membase + UART011_ICR);
}
static irqreturn_t pl011_int(int irq, void *dev_id)
@@ -1381,25 +1357,15 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
struct uart_amba_port *uap = dev_id;
unsigned long flags;
unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
+ u16 imsc;
int handled = 0;
- unsigned int dummy_read;
spin_lock_irqsave(&uap->port.lock, flags);
- status = readw(uap->port.membase + UART011_MIS);
+ imsc = readw(uap->port.membase + UART011_IMSC);
+ status = readw(uap->port.membase + UART011_RIS) & imsc;
if (status) {
do {
- if (uap->vendor->cts_event_workaround) {
- /* workaround to make sure that all bits are unlocked.. */
- writew(0x00, uap->port.membase + UART011_ICR);
-
- /*
- * WA: introduce 26ns(1 uart clk) delay before W1C;
- * single apb access will incur 2 pclk(133.12Mhz) delay,
- * so add 2 dummy reads
- */
- dummy_read = readw(uap->port.membase + UART011_ICR);
- dummy_read = readw(uap->port.membase + UART011_ICR);
- }
+ check_apply_cts_event_workaround(uap);
writew(status & ~(UART011_TXIS|UART011_RTIS|
UART011_RXIS),
@@ -1414,15 +1380,13 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
if (status & (UART011_DSRMIS|UART011_DCDMIS|
UART011_CTSMIS|UART011_RIMIS))
pl011_modem_status(uap);
- if (status & UART011_TXIS) {
- pl011_tx_irq_seen(uap);
- pl011_tx_chars(uap);
- }
+ if (status & UART011_TXIS)
+ pl011_tx_chars(uap, true);
if (pass_counter-- == 0)
break;
- status = readw(uap->port.membase + UART011_MIS);
+ status = readw(uap->port.membase + UART011_RIS) & imsc;
} while (status != 0);
handled = 1;
}
@@ -1617,6 +1581,32 @@ static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
}
}
+static int pl011_allocate_irq(struct uart_amba_port *uap)
+{
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+
+ return request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
+}
+
+/*
+ * Enable interrupts, only timeouts when using DMA
+ * if initial RX DMA job failed, start in interrupt mode
+ * as well.
+ */
+static void pl011_enable_interrupts(struct uart_amba_port *uap)
+{
+ spin_lock_irq(&uap->port.lock);
+
+ /* Clear out any spuriously appearing RX interrupts */
+ writew(UART011_RTIS | UART011_RXIS,
+ uap->port.membase + UART011_ICR);
+ uap->im = UART011_RTIM;
+ if (!pl011_dma_rx_running(uap))
+ uap->im |= UART011_RXIM;
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+ spin_unlock_irq(&uap->port.lock);
+}
+
static int pl011_startup(struct uart_port *port)
{
struct uart_amba_port *uap =
@@ -1628,20 +1618,12 @@ static int pl011_startup(struct uart_port *port)
if (retval)
goto clk_dis;
- writew(uap->im, uap->port.membase + UART011_IMSC);
-
- /*
- * Allocate the IRQ
- */
- retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap);
+ retval = pl011_allocate_irq(uap);
if (retval)
goto clk_dis;
writew(uap->vendor->ifls, uap->port.membase + UART011_IFLS);
- /* Assume that TX IRQ doesn't work until we see one: */
- uap->tx_irq_seen = 0;
-
spin_lock_irq(&uap->port.lock);
/* restore RTS and DTR */
@@ -1659,20 +1641,7 @@ static int pl011_startup(struct uart_port *port)
/* Startup DMA */
pl011_dma_startup(uap);
- /*
- * Finally, enable interrupts, only timeouts when using DMA
- * if initial RX DMA job failed, start in interrupt mode
- * as well.
- */
- spin_lock_irq(&uap->port.lock);
- /* Clear out any spuriously appearing RX interrupts */
- writew(UART011_RTIS | UART011_RXIS,
- uap->port.membase + UART011_ICR);
- uap->im = UART011_RTIM;
- if (!pl011_dma_rx_running(uap))
- uap->im |= UART011_RXIM;
- writew(uap->im, uap->port.membase + UART011_IMSC);
- spin_unlock_irq(&uap->port.lock);
+ pl011_enable_interrupts(uap);
return 0;
@@ -1681,6 +1650,28 @@ static int pl011_startup(struct uart_port *port)
return retval;
}
+static int sbsa_uart_startup(struct uart_port *port)
+{
+ struct uart_amba_port *uap =
+ container_of(port, struct uart_amba_port, port);
+ int retval;
+
+ retval = pl011_hwinit(port);
+ if (retval)
+ return retval;
+
+ retval = pl011_allocate_irq(uap);
+ if (retval)
+ return retval;
+
+ /* The SBSA UART does not support any modem status lines. */
+ uap->old_status = 0;
+
+ pl011_enable_interrupts(uap);
+
+ return 0;
+}
+
static void pl011_shutdown_channel(struct uart_amba_port *uap,
unsigned int lcrh)
{
@@ -1691,36 +1682,15 @@ static void pl011_shutdown_channel(struct uart_amba_port *uap,
writew(val, uap->port.membase + lcrh);
}
-static void pl011_shutdown(struct uart_port *port)
+/*
+ * disable the port. It should not disable RTS and DTR.
+ * Also RTS and DTR state should be preserved to restore
+ * it during startup().
+ */
+static void pl011_disable_uart(struct uart_amba_port *uap)
{
- struct uart_amba_port *uap =
- container_of(port, struct uart_amba_port, port);
unsigned int cr;
- cancel_delayed_work_sync(&uap->tx_softirq_work);
-
- /*
- * disable all interrupts
- */
- spin_lock_irq(&uap->port.lock);
- uap->im = 0;
- writew(uap->im, uap->port.membase + UART011_IMSC);
- writew(0xffff, uap->port.membase + UART011_ICR);
- spin_unlock_irq(&uap->port.lock);
-
- pl011_dma_shutdown(uap);
-
- /*
- * Free the interrupt
- */
- free_irq(uap->port.irq, uap);
-
- /*
- * disable the port
- * disable the port. It should not disable RTS and DTR.
- * Also RTS and DTR state should be preserved to restore
- * it during startup().
- */
uap->autorts = false;
spin_lock_irq(&uap->port.lock);
cr = readw(uap->port.membase + UART011_CR);
@@ -1736,6 +1706,32 @@ static void pl011_shutdown(struct uart_port *port)
pl011_shutdown_channel(uap, uap->lcrh_rx);
if (uap->lcrh_rx != uap->lcrh_tx)
pl011_shutdown_channel(uap, uap->lcrh_tx);
+}
+
+static void pl011_disable_interrupts(struct uart_amba_port *uap)
+{
+ spin_lock_irq(&uap->port.lock);
+
+ /* mask all interrupts and clear all pending ones */
+ uap->im = 0;
+ writew(uap->im, uap->port.membase + UART011_IMSC);
+ writew(0xffff, uap->port.membase + UART011_ICR);
+
+ spin_unlock_irq(&uap->port.lock);
+}
+
+static void pl011_shutdown(struct uart_port *port)
+{
+ struct uart_amba_port *uap =
+ container_of(port, struct uart_amba_port, port);
+
+ pl011_disable_interrupts(uap);
+
+ pl011_dma_shutdown(uap);
+
+ free_irq(uap->port.irq, uap);
+
+ pl011_disable_uart(uap);
/*
* Shut down the clock producer
@@ -1756,6 +1752,51 @@ static void pl011_shutdown(struct uart_port *port)
uap->port.ops->flush_buffer(port);
}
+static void sbsa_uart_shutdown(struct uart_port *port)
+{
+ struct uart_amba_port *uap =
+ container_of(port, struct uart_amba_port, port);
+
+ pl011_disable_interrupts(uap);
+
+ free_irq(uap->port.irq, uap);
+
+ if (uap->port.ops->flush_buffer)
+ uap->port.ops->flush_buffer(port);
+}
+
+static void
+pl011_setup_status_masks(struct uart_port *port, struct ktermios *termios)
+{
+ port->read_status_mask = UART011_DR_OE | 255;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= UART011_DR_FE | UART011_DR_PE;
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
+ port->read_status_mask |= UART011_DR_BE;
+
+ /*
+ * Characters to ignore
+ */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= UART011_DR_BE;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART011_DR_OE;
+ }
+
+ /*
+ * Ignore all characters if CREAD is not set.
+ */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= UART_DUMMY_DR_RX;
+}
+
static void
pl011_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
@@ -1820,33 +1861,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
*/
uart_update_timeout(port, termios->c_cflag, baud);
- port->read_status_mask = UART011_DR_OE | 255;
- if (termios->c_iflag & INPCK)
- port->read_status_mask |= UART011_DR_FE | UART011_DR_PE;
- if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
- port->read_status_mask |= UART011_DR_BE;
-
- /*
- * Characters to ignore
- */
- port->ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE;
- if (termios->c_iflag & IGNBRK) {
- port->ignore_status_mask |= UART011_DR_BE;
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns too (for real raw support).
- */
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= UART011_DR_OE;
- }
-
- /*
- * Ignore all characters if CREAD is not set.
- */
- if ((termios->c_cflag & CREAD) == 0)
- port->ignore_status_mask |= UART_DUMMY_DR_RX;
+ pl011_setup_status_masks(port, termios);
if (UART_ENABLE_MS(port, termios->c_cflag))
pl011_enable_ms(port);
@@ -1901,6 +1916,27 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
spin_unlock_irqrestore(&port->lock, flags);
}
+static void
+sbsa_uart_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct uart_amba_port *uap =
+ container_of(port, struct uart_amba_port, port);
+ unsigned long flags;
+
+ tty_termios_encode_baud_rate(termios, uap->fixed_baud, uap->fixed_baud);
+
+ /* The SBSA UART only supports 8n1 without hardware flow control. */
+ termios->c_cflag &= ~(CSIZE | CSTOPB | PARENB | PARODD);
+ termios->c_cflag &= ~(CMSPAR | CRTSCTS);
+ termios->c_cflag |= CS8 | CLOCAL;
+
+ spin_lock_irqsave(&port->lock, flags);
+ uart_update_timeout(port, CS8, uap->fixed_baud);
+ pl011_setup_status_masks(port, termios);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
static const char *pl011_type(struct uart_port *port)
{
struct uart_amba_port *uap =
@@ -1976,6 +2012,37 @@ static struct uart_ops amba_pl011_pops = {
#endif
};
+static void sbsa_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static unsigned int sbsa_uart_get_mctrl(struct uart_port *port)
+{
+ return 0;
+}
+
+static const struct uart_ops sbsa_uart_pops = {
+ .tx_empty = pl011_tx_empty,
+ .set_mctrl = sbsa_uart_set_mctrl,
+ .get_mctrl = sbsa_uart_get_mctrl,
+ .stop_tx = pl011_stop_tx,
+ .start_tx = pl011_start_tx,
+ .stop_rx = pl011_stop_rx,
+ .startup = sbsa_uart_startup,
+ .shutdown = sbsa_uart_shutdown,
+ .set_termios = sbsa_uart_set_termios,
+ .type = pl011_type,
+ .release_port = pl011_release_port,
+ .request_port = pl011_request_port,
+ .config_port = pl011_config_port,
+ .verify_port = pl011_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_init = pl011_hwinit,
+ .poll_get_char = pl011_get_poll_char,
+ .poll_put_char = pl011_put_poll_char,
+#endif
+};
+
static struct uart_amba_port *amba_ports[UART_NR];
#ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE
@@ -1994,7 +2061,7 @@ static void
pl011_console_write(struct console *co, const char *s, unsigned int count)
{
struct uart_amba_port *uap = amba_ports[co->index];
- unsigned int status, old_cr, new_cr;
+ unsigned int status, old_cr = 0, new_cr;
unsigned long flags;
int locked = 1;
@@ -2017,10 +2084,12 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
/*
* First save the CR then disable the interrupts
*/
- old_cr = readw(uap->port.membase + UART011_CR);
- new_cr = old_cr & ~UART011_CR_CTSEN;
- new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
- writew(new_cr, uap->port.membase + UART011_CR);
+ if (!uap->vendor->always_enabled) {
+ old_cr = readw(uap->port.membase + UART011_CR);
+ new_cr = old_cr & ~UART011_CR_CTSEN;
+ new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE;
+ writew(new_cr, uap->port.membase + UART011_CR);
+ }
uart_console_write(&uap->port, s, count, pl011_console_putchar);
@@ -2031,7 +2100,8 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
do {
status = readw(uap->port.membase + UART01x_FR);
} while (status & UART01x_FR_BUSY);
- writew(old_cr, uap->port.membase + UART011_CR);
+ if (!uap->vendor->always_enabled)
+ writew(old_cr, uap->port.membase + UART011_CR);
if (locked)
spin_unlock_irqrestore(&uap->port.lock, flags);
@@ -2111,10 +2181,15 @@ static int __init pl011_console_setup(struct console *co, char *options)
uap->port.uartclk = clk_get_rate(uap->clk);
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
- else
- pl011_console_get_options(uap, &baud, &parity, &bits);
+ if (uap->vendor->fixed_options) {
+ baud = uap->fixed_baud;
+ } else {
+ if (options)
+ uart_parse_options(options,
+ &baud, &parity, &bits, &flow);
+ else
+ pl011_console_get_options(uap, &baud, &parity, &bits);
+ }
return uart_set_options(&uap->port, co, baud, parity, bits, flow);
}
@@ -2206,97 +2281,126 @@ static int pl011_probe_dt_alias(int index, struct device *dev)
return ret;
}
-static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
+/* unregisters the driver also if no more ports are left */
+static void pl011_unregister_port(struct uart_amba_port *uap)
{
- struct uart_amba_port *uap;
- struct vendor_data *vendor = id->data;
- void __iomem *base;
- int i, ret;
+ int i;
+ bool busy = false;
+
+ for (i = 0; i < ARRAY_SIZE(amba_ports); i++) {
+ if (amba_ports[i] == uap)
+ amba_ports[i] = NULL;
+ else if (amba_ports[i])
+ busy = true;
+ }
+ pl011_dma_remove(uap);
+ if (!busy)
+ uart_unregister_driver(&amba_reg);
+}
+
+static int pl011_find_free_port(void)
+{
+ int i;
for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
if (amba_ports[i] == NULL)
- break;
-
- if (i == ARRAY_SIZE(amba_ports))
- return -EBUSY;
+ return i;
- uap = devm_kzalloc(&dev->dev, sizeof(struct uart_amba_port),
- GFP_KERNEL);
- if (uap == NULL)
- return -ENOMEM;
+ return -EBUSY;
+}
- i = pl011_probe_dt_alias(i, &dev->dev);
+static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap,
+ struct resource *mmiobase, int index)
+{
+ void __iomem *base;
- base = devm_ioremap(&dev->dev, dev->res.start,
- resource_size(&dev->res));
- if (!base)
- return -ENOMEM;
+ base = devm_ioremap_resource(dev, mmiobase);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
- uap->clk = devm_clk_get(&dev->dev, NULL);
- if (IS_ERR(uap->clk))
- return PTR_ERR(uap->clk);
+ index = pl011_probe_dt_alias(index, dev);
- uap->vendor = vendor;
- uap->lcrh_rx = vendor->lcrh_rx;
- uap->lcrh_tx = vendor->lcrh_tx;
uap->old_cr = 0;
- uap->fifosize = vendor->get_fifosize(dev);
- uap->port.dev = &dev->dev;
- uap->port.mapbase = dev->res.start;
+ uap->port.dev = dev;
+ uap->port.mapbase = mmiobase->start;
uap->port.membase = base;
uap->port.iotype = UPIO_MEM;
- uap->port.irq = dev->irq[0];
uap->port.fifosize = uap->fifosize;
- uap->port.ops = &amba_pl011_pops;
uap->port.flags = UPF_BOOT_AUTOCONF;
- uap->port.line = i;
- INIT_DELAYED_WORK(&uap->tx_softirq_work, pl011_tx_softirq);
+ uap->port.line = index;
- /* Ensure interrupts from this UART are masked and cleared */
- writew(0, uap->port.membase + UART011_IMSC);
- writew(0xffff, uap->port.membase + UART011_ICR);
+ amba_ports[index] = uap;
- snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
+ return 0;
+}
- amba_ports[i] = uap;
+static int pl011_register_port(struct uart_amba_port *uap)
+{
+ int ret;
- amba_set_drvdata(dev, uap);
+ /* Ensure interrupts from this UART are masked and cleared */
+ writew(0, uap->port.membase + UART011_IMSC);
+ writew(0xffff, uap->port.membase + UART011_ICR);
if (!amba_reg.state) {
ret = uart_register_driver(&amba_reg);
if (ret < 0) {
- dev_err(&dev->dev,
+ dev_err(uap->port.dev,
"Failed to register AMBA-PL011 driver\n");
return ret;
}
}
ret = uart_add_one_port(&amba_reg, &uap->port);
- if (ret) {
- amba_ports[i] = NULL;
- uart_unregister_driver(&amba_reg);
- }
+ if (ret)
+ pl011_unregister_port(uap);
return ret;
}
+static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
+{
+ struct uart_amba_port *uap;
+ struct vendor_data *vendor = id->data;
+ int portnr, ret;
+
+ portnr = pl011_find_free_port();
+ if (portnr < 0)
+ return portnr;
+
+ uap = devm_kzalloc(&dev->dev, sizeof(struct uart_amba_port),
+ GFP_KERNEL);
+ if (!uap)
+ return -ENOMEM;
+
+ uap->clk = devm_clk_get(&dev->dev, NULL);
+ if (IS_ERR(uap->clk))
+ return PTR_ERR(uap->clk);
+
+ uap->vendor = vendor;
+ uap->lcrh_rx = vendor->lcrh_rx;
+ uap->lcrh_tx = vendor->lcrh_tx;
+ uap->fifosize = vendor->get_fifosize(dev);
+ uap->port.irq = dev->irq[0];
+ uap->port.ops = &amba_pl011_pops;
+
+ snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
+
+ ret = pl011_setup_port(&dev->dev, uap, &dev->res, portnr);
+ if (ret)
+ return ret;
+
+ amba_set_drvdata(dev, uap);
+
+ return pl011_register_port(uap);
+}
+
static int pl011_remove(struct amba_device *dev)
{
struct uart_amba_port *uap = amba_get_drvdata(dev);
- bool busy = false;
- int i;
uart_remove_one_port(&amba_reg, &uap->port);
-
- for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
- if (amba_ports[i] == uap)
- amba_ports[i] = NULL;
- else if (amba_ports[i])
- busy = true;
-
- pl011_dma_remove(uap);
- if (!busy)
- uart_unregister_driver(&amba_reg);
+ pl011_unregister_port(uap);
return 0;
}
@@ -2324,6 +2428,86 @@ static int pl011_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume);
+static int sbsa_uart_probe(struct platform_device *pdev)
+{
+ struct uart_amba_port *uap;
+ struct resource *r;
+ int portnr, ret;
+ int baudrate;
+
+ /*
+ * Check the mandatory baud rate parameter in the DT node early
+ * so that we can easily exit with the error.
+ */
+ if (pdev->dev.of_node) {
+ struct device_node *np = pdev->dev.of_node;
+
+ ret = of_property_read_u32(np, "current-speed", &baudrate);
+ if (ret)
+ return ret;
+ } else {
+ baudrate = 115200;
+ }
+
+ portnr = pl011_find_free_port();
+ if (portnr < 0)
+ return portnr;
+
+ uap = devm_kzalloc(&pdev->dev, sizeof(struct uart_amba_port),
+ GFP_KERNEL);
+ if (!uap)
+ return -ENOMEM;
+
+ uap->vendor = &vendor_sbsa;
+ uap->fifosize = 32;
+ uap->port.irq = platform_get_irq(pdev, 0);
+ uap->port.ops = &sbsa_uart_pops;
+ uap->fixed_baud = baudrate;
+
+ snprintf(uap->type, sizeof(uap->type), "SBSA");
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ ret = pl011_setup_port(&pdev->dev, uap, r, portnr);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, uap);
+
+ return pl011_register_port(uap);
+}
+
+static int sbsa_uart_remove(struct platform_device *pdev)
+{
+ struct uart_amba_port *uap = platform_get_drvdata(pdev);
+
+ uart_remove_one_port(&amba_reg, &uap->port);
+ pl011_unregister_port(uap);
+ return 0;
+}
+
+static const struct of_device_id sbsa_uart_of_match[] = {
+ { .compatible = "arm,sbsa-uart", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sbsa_uart_of_match);
+
+static const struct acpi_device_id sbsa_uart_acpi_match[] = {
+ { "ARMH0011", 0 },
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, sbsa_uart_acpi_match);
+
+static struct platform_driver arm_sbsa_uart_platform_driver = {
+ .probe = sbsa_uart_probe,
+ .remove = sbsa_uart_remove,
+ .driver = {
+ .name = "sbsa-uart",
+ .of_match_table = of_match_ptr(sbsa_uart_of_match),
+ .acpi_match_table = ACPI_PTR(sbsa_uart_acpi_match),
+ },
+};
+
static struct amba_id pl011_ids[] = {
{
.id = 0x00041011,
@@ -2354,11 +2538,14 @@ static int __init pl011_init(void)
{
printk(KERN_INFO "Serial: AMBA PL011 UART driver\n");
+ if (platform_driver_register(&arm_sbsa_uart_platform_driver))
+ pr_warn("could not register SBSA UART platform driver\n");
return amba_driver_register(&pl011_driver);
}
static void __exit pl011_exit(void)
{
+ platform_driver_unregister(&arm_sbsa_uart_platform_driver);
amba_driver_unregister(&pl011_driver);
}
diff --git a/kernel/drivers/tty/serial/apbuart.c b/kernel/drivers/tty/serial/apbuart.c
index f3af31713..75eb083b3 100644
--- a/kernel/drivers/tty/serial/apbuart.c
+++ b/kernel/drivers/tty/serial/apbuart.c
@@ -581,6 +581,7 @@ static const struct of_device_id apbuart_match[] = {
},
{},
};
+MODULE_DEVICE_TABLE(of, apbuart_match);
static struct platform_driver grlib_apbuart_of_driver = {
.probe = apbuart_probe,
diff --git a/kernel/drivers/tty/serial/atmel_serial.c b/kernel/drivers/tty/serial/atmel_serial.c
index 5ca1dfb05..942945589 100644
--- a/kernel/drivers/tty/serial/atmel_serial.c
+++ b/kernel/drivers/tty/serial/atmel_serial.c
@@ -56,6 +56,15 @@
/* Revisit: We should calculate this based on the actual port settings */
#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
+/* The minium number of data FIFOs should be able to contain */
+#define ATMEL_MIN_FIFO_SIZE 8
+/*
+ * These two offsets are substracted from the RX FIFO size to define the RTS
+ * high and low thresholds
+ */
+#define ATMEL_RTS_HIGH_OFFSET 16
+#define ATMEL_RTS_LOW_OFFSET 20
+
#if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif
@@ -88,37 +97,6 @@ static void atmel_stop_rx(struct uart_port *port);
#define ATMEL_ISR_PASS_LIMIT 256
-/* UART registers. CR is write-only, hence no GET macro */
-#define UART_PUT_CR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_CR)
-#define UART_GET_MR(port) __raw_readl((port)->membase + ATMEL_US_MR)
-#define UART_PUT_MR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_MR)
-#define UART_PUT_IER(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IER)
-#define UART_PUT_IDR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IDR)
-#define UART_GET_IMR(port) __raw_readl((port)->membase + ATMEL_US_IMR)
-#define UART_GET_CSR(port) __raw_readl((port)->membase + ATMEL_US_CSR)
-#define UART_GET_CHAR(port) __raw_readl((port)->membase + ATMEL_US_RHR)
-#define UART_PUT_CHAR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_THR)
-#define UART_GET_BRGR(port) __raw_readl((port)->membase + ATMEL_US_BRGR)
-#define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR)
-#define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR)
-#define UART_PUT_TTGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_TTGR)
-#define UART_GET_IP_NAME(port) __raw_readl((port)->membase + ATMEL_US_NAME)
-#define UART_GET_IP_VERSION(port) __raw_readl((port)->membase + ATMEL_US_VERSION)
-
- /* PDC registers */
-#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
-#define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR)
-
-#define UART_PUT_RPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RPR)
-#define UART_GET_RPR(port) __raw_readl((port)->membase + ATMEL_PDC_RPR)
-#define UART_PUT_RCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RCR)
-#define UART_PUT_RNPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNPR)
-#define UART_PUT_RNCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNCR)
-
-#define UART_PUT_TPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
-#define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
-#define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR)
-
struct atmel_dma_buffer {
unsigned char *buf;
dma_addr_t dma_addr;
@@ -134,6 +112,12 @@ struct atmel_uart_char {
#define ATMEL_SERIAL_RINGSIZE 1024
/*
+ * at91: 6 USARTs and one DBGU port (SAM9260)
+ * avr32: 4
+ */
+#define ATMEL_MAX_UART 7
+
+/*
* We wrap our port structure around the generic uart_port.
*/
struct atmel_uart_port {
@@ -165,12 +149,17 @@ struct atmel_uart_port {
struct tasklet_struct tasklet;
unsigned int irq_status;
unsigned int irq_status_prev;
+ unsigned int status_change;
+ unsigned int tx_len;
struct circ_buf rx_ring;
struct mctrl_gpios *gpios;
int gpio_irq[UART_GPIO_MAX];
unsigned int tx_done_mask;
+ u32 fifo_size;
+ u32 rts_high;
+ u32 rts_low;
bool ms_irq_enabled;
bool is_usart; /* usart or uart */
struct timer_list uart_timer; /* uart timer */
@@ -211,6 +200,43 @@ to_atmel_uart_port(struct uart_port *uart)
return container_of(uart, struct atmel_uart_port, uart);
}
+static inline u32 atmel_uart_readl(struct uart_port *port, u32 reg)
+{
+ return __raw_readl(port->membase + reg);
+}
+
+static inline void atmel_uart_writel(struct uart_port *port, u32 reg, u32 value)
+{
+ __raw_writel(value, port->membase + reg);
+}
+
+#ifdef CONFIG_AVR32
+
+/* AVR32 cannot handle 8 or 16bit I/O accesses but only 32bit I/O accesses */
+static inline u8 atmel_uart_read_char(struct uart_port *port)
+{
+ return __raw_readl(port->membase + ATMEL_US_RHR);
+}
+
+static inline void atmel_uart_write_char(struct uart_port *port, u8 value)
+{
+ __raw_writel(value, port->membase + ATMEL_US_THR);
+}
+
+#else
+
+static inline u8 atmel_uart_read_char(struct uart_port *port)
+{
+ return __raw_readb(port->membase + ATMEL_US_RHR);
+}
+
+static inline void atmel_uart_write_char(struct uart_port *port, u8 value)
+{
+ __raw_writeb(value, port->membase + ATMEL_US_THR);
+}
+
+#endif
+
#ifdef CONFIG_SERIAL_ATMEL_PDC
static bool atmel_use_pdc_rx(struct uart_port *port)
{
@@ -256,7 +282,7 @@ static unsigned int atmel_get_lines_status(struct uart_port *port)
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
unsigned int status, ret = 0;
- status = UART_GET_CSR(port);
+ status = atmel_uart_readl(port, ATMEL_US_CSR);
mctrl_gpio_get(atmel_port->gpios, &ret);
@@ -303,9 +329,9 @@ static int atmel_config_rs485(struct uart_port *port,
unsigned int mode;
/* Disable interrupts */
- UART_PUT_IDR(port, atmel_port->tx_done_mask);
+ atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask);
- mode = UART_GET_MR(port);
+ mode = atmel_uart_readl(port, ATMEL_US_MR);
/* Resetting serial mode to RS232 (0x0) */
mode &= ~ATMEL_US_USMODE;
@@ -315,7 +341,8 @@ static int atmel_config_rs485(struct uart_port *port,
if (rs485conf->flags & SER_RS485_ENABLED) {
dev_dbg(port->dev, "Setting UART to RS485\n");
atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
- UART_PUT_TTGR(port, rs485conf->delay_rts_after_send);
+ atmel_uart_writel(port, ATMEL_US_TTGR,
+ rs485conf->delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
} else {
dev_dbg(port->dev, "Setting UART to RS232\n");
@@ -325,10 +352,10 @@ static int atmel_config_rs485(struct uart_port *port,
else
atmel_port->tx_done_mask = ATMEL_US_TXRDY;
}
- UART_PUT_MR(port, mode);
+ atmel_uart_writel(port, ATMEL_US_MR, mode);
/* Enable interrupts */
- UART_PUT_IER(port, atmel_port->tx_done_mask);
+ atmel_uart_writel(port, ATMEL_US_IER, atmel_port->tx_done_mask);
return 0;
}
@@ -338,7 +365,9 @@ static int atmel_config_rs485(struct uart_port *port,
*/
static u_int atmel_tx_empty(struct uart_port *port)
{
- return (UART_GET_CSR(port) & ATMEL_US_TXEMPTY) ? TIOCSER_TEMT : 0;
+ return (atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXEMPTY) ?
+ TIOCSER_TEMT :
+ 0;
}
/*
@@ -347,13 +376,14 @@ static u_int atmel_tx_empty(struct uart_port *port)
static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
{
unsigned int control = 0;
- unsigned int mode = UART_GET_MR(port);
+ unsigned int mode = atmel_uart_readl(port, ATMEL_US_MR);
unsigned int rts_paused, rts_ready;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
/* override mode to RS485 if needed, otherwise keep the current mode */
if (port->rs485.flags & SER_RS485_ENABLED) {
- UART_PUT_TTGR(port, port->rs485.delay_rts_after_send);
+ atmel_uart_writel(port, ATMEL_US_TTGR,
+ port->rs485.delay_rts_after_send);
mode &= ~ATMEL_US_USMODE;
mode |= ATMEL_US_USMODE_RS485;
}
@@ -383,7 +413,7 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
else
control |= ATMEL_US_DTRDIS;
- UART_PUT_CR(port, control);
+ atmel_uart_writel(port, ATMEL_US_CR, control);
mctrl_gpio_set(atmel_port->gpios, mctrl);
@@ -394,7 +424,7 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
else
mode |= ATMEL_US_CHMODE_NORMAL;
- UART_PUT_MR(port, mode);
+ atmel_uart_writel(port, ATMEL_US_MR, mode);
}
/*
@@ -405,7 +435,7 @@ static u_int atmel_get_mctrl(struct uart_port *port)
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
unsigned int ret = 0, status;
- status = UART_GET_CSR(port);
+ status = atmel_uart_readl(port, ATMEL_US_CSR);
/*
* The control signals are active low.
@@ -431,10 +461,10 @@ static void atmel_stop_tx(struct uart_port *port)
if (atmel_use_pdc_tx(port)) {
/* disable PDC transmit */
- UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+ atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS);
}
/* Disable interrupts */
- UART_PUT_IDR(port, atmel_port->tx_done_mask);
+ atmel_uart_writel(port, ATMEL_US_IDR, atmel_port->tx_done_mask);
if ((port->rs485.flags & SER_RS485_ENABLED) &&
!(port->rs485.flags & SER_RS485_RX_DURING_TX))
@@ -449,7 +479,7 @@ static void atmel_start_tx(struct uart_port *port)
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
if (atmel_use_pdc_tx(port)) {
- if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
+ if (atmel_uart_readl(port, ATMEL_PDC_PTSR) & ATMEL_PDC_TXTEN)
/* The transmitter is already running. Yes, we
really need this.*/
return;
@@ -459,10 +489,10 @@ static void atmel_start_tx(struct uart_port *port)
atmel_stop_rx(port);
/* re-enable PDC transmit */
- UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
+ atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
}
/* Enable interrupts */
- UART_PUT_IER(port, atmel_port->tx_done_mask);
+ atmel_uart_writel(port, ATMEL_US_IER, atmel_port->tx_done_mask);
}
/*
@@ -470,17 +500,19 @@ static void atmel_start_tx(struct uart_port *port)
*/
static void atmel_start_rx(struct uart_port *port)
{
- UART_PUT_CR(port, ATMEL_US_RSTSTA); /* reset status and receiver */
+ /* reset status and receiver */
+ atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA);
- UART_PUT_CR(port, ATMEL_US_RXEN);
+ atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RXEN);
if (atmel_use_pdc_rx(port)) {
/* enable PDC controller */
- UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
- port->read_status_mask);
- UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
+ atmel_uart_writel(port, ATMEL_US_IER,
+ ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
+ port->read_status_mask);
+ atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
} else {
- UART_PUT_IER(port, ATMEL_US_RXRDY);
+ atmel_uart_writel(port, ATMEL_US_IER, ATMEL_US_RXRDY);
}
}
@@ -489,15 +521,16 @@ static void atmel_start_rx(struct uart_port *port)
*/
static void atmel_stop_rx(struct uart_port *port)
{
- UART_PUT_CR(port, ATMEL_US_RXDIS);
+ atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RXDIS);
if (atmel_use_pdc_rx(port)) {
/* disable PDC receive */
- UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);
- UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
- port->read_status_mask);
+ atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS);
+ atmel_uart_writel(port, ATMEL_US_IDR,
+ ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
+ port->read_status_mask);
} else {
- UART_PUT_IDR(port, ATMEL_US_RXRDY);
+ atmel_uart_writel(port, ATMEL_US_IDR, ATMEL_US_RXRDY);
}
}
@@ -537,7 +570,7 @@ static void atmel_enable_ms(struct uart_port *port)
else
ier |= ATMEL_US_DCDIC;
- UART_PUT_IER(port, ier);
+ atmel_uart_writel(port, ATMEL_US_IER, ier);
}
/*
@@ -576,7 +609,7 @@ static void atmel_disable_ms(struct uart_port *port)
else
idr |= ATMEL_US_DCDIC;
- UART_PUT_IDR(port, idr);
+ atmel_uart_writel(port, ATMEL_US_IDR, idr);
}
/*
@@ -585,9 +618,11 @@ static void atmel_disable_ms(struct uart_port *port)
static void atmel_break_ctl(struct uart_port *port, int break_state)
{
if (break_state != 0)
- UART_PUT_CR(port, ATMEL_US_STTBRK); /* start break */
+ /* start break */
+ atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_STTBRK);
else
- UART_PUT_CR(port, ATMEL_US_STPBRK); /* stop break */
+ /* stop break */
+ atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_STPBRK);
}
/*
@@ -621,7 +656,7 @@ atmel_buffer_rx_char(struct uart_port *port, unsigned int status,
static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
{
/* clear error */
- UART_PUT_CR(port, ATMEL_US_RSTSTA);
+ atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA);
if (status & ATMEL_US_RXBRK) {
/* ignore side-effect */
@@ -644,9 +679,9 @@ static void atmel_rx_chars(struct uart_port *port)
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
unsigned int status, ch;
- status = UART_GET_CSR(port);
+ status = atmel_uart_readl(port, ATMEL_US_CSR);
while (status & ATMEL_US_RXRDY) {
- ch = UART_GET_CHAR(port);
+ ch = atmel_uart_read_char(port);
/*
* note that the error handling code is
@@ -657,12 +692,13 @@ static void atmel_rx_chars(struct uart_port *port)
|| atmel_port->break_active)) {
/* clear error */
- UART_PUT_CR(port, ATMEL_US_RSTSTA);
+ atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA);
if (status & ATMEL_US_RXBRK
&& !atmel_port->break_active) {
atmel_port->break_active = 1;
- UART_PUT_IER(port, ATMEL_US_RXBRK);
+ atmel_uart_writel(port, ATMEL_US_IER,
+ ATMEL_US_RXBRK);
} else {
/*
* This is either the end-of-break
@@ -671,14 +707,15 @@ static void atmel_rx_chars(struct uart_port *port)
* being set. In both cases, the next
* RXBRK will indicate start-of-break.
*/
- UART_PUT_IDR(port, ATMEL_US_RXBRK);
+ atmel_uart_writel(port, ATMEL_US_IDR,
+ ATMEL_US_RXBRK);
status &= ~ATMEL_US_RXBRK;
atmel_port->break_active = 0;
}
}
atmel_buffer_rx_char(port, status, ch);
- status = UART_GET_CSR(port);
+ status = atmel_uart_readl(port, ATMEL_US_CSR);
}
tasklet_schedule(&atmel_port->tasklet);
@@ -693,16 +730,18 @@ static void atmel_tx_chars(struct uart_port *port)
struct circ_buf *xmit = &port->state->xmit;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- if (port->x_char && UART_GET_CSR(port) & atmel_port->tx_done_mask) {
- UART_PUT_CHAR(port, port->x_char);
+ if (port->x_char &&
+ (atmel_uart_readl(port, ATMEL_US_CSR) & atmel_port->tx_done_mask)) {
+ atmel_uart_write_char(port, port->x_char);
port->icount.tx++;
port->x_char = 0;
}
if (uart_circ_empty(xmit) || uart_tx_stopped(port))
return;
- while (UART_GET_CSR(port) & atmel_port->tx_done_mask) {
- UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
+ while (atmel_uart_readl(port, ATMEL_US_CSR) &
+ atmel_port->tx_done_mask) {
+ atmel_uart_write_char(port, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
if (uart_circ_empty(xmit))
@@ -714,7 +753,8 @@ static void atmel_tx_chars(struct uart_port *port)
if (!uart_circ_empty(xmit))
/* Enable interrupts */
- UART_PUT_IER(port, atmel_port->tx_done_mask);
+ atmel_uart_writel(port, ATMEL_US_IER,
+ atmel_port->tx_done_mask);
}
static void atmel_complete_tx_dma(void *arg)
@@ -729,10 +769,10 @@ static void atmel_complete_tx_dma(void *arg)
if (chan)
dmaengine_terminate_all(chan);
- xmit->tail += sg_dma_len(&atmel_port->sg_tx);
+ xmit->tail += atmel_port->tx_len;
xmit->tail &= UART_XMIT_SIZE - 1;
- port->icount.tx += sg_dma_len(&atmel_port->sg_tx);
+ port->icount.tx += atmel_port->tx_len;
spin_lock_irq(&atmel_port->lock_tx);
async_tx_ack(atmel_port->desc_tx);
@@ -780,7 +820,9 @@ static void atmel_tx_dma(struct uart_port *port)
struct circ_buf *xmit = &port->state->xmit;
struct dma_chan *chan = atmel_port->chan_tx;
struct dma_async_tx_descriptor *desc;
- struct scatterlist *sg = &atmel_port->sg_tx;
+ struct scatterlist sgl[2], *sg, *sg_tx = &atmel_port->sg_tx;
+ unsigned int tx_len, part1_len, part2_len, sg_len;
+ dma_addr_t phys_addr;
/* Make sure we have an idle channel */
if (atmel_port->desc_tx != NULL)
@@ -796,18 +838,46 @@ static void atmel_tx_dma(struct uart_port *port)
* Take the port lock to get a
* consistent xmit buffer state.
*/
- sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
- sg_dma_address(sg) = (sg_dma_address(sg) &
- ~(UART_XMIT_SIZE - 1))
- + sg->offset;
- sg_dma_len(sg) = CIRC_CNT_TO_END(xmit->head,
- xmit->tail,
- UART_XMIT_SIZE);
- BUG_ON(!sg_dma_len(sg));
+ tx_len = CIRC_CNT_TO_END(xmit->head,
+ xmit->tail,
+ UART_XMIT_SIZE);
+
+ if (atmel_port->fifo_size) {
+ /* multi data mode */
+ part1_len = (tx_len & ~0x3); /* DWORD access */
+ part2_len = (tx_len & 0x3); /* BYTE access */
+ } else {
+ /* single data (legacy) mode */
+ part1_len = 0;
+ part2_len = tx_len; /* BYTE access only */
+ }
+
+ sg_init_table(sgl, 2);
+ sg_len = 0;
+ phys_addr = sg_dma_address(sg_tx) + xmit->tail;
+ if (part1_len) {
+ sg = &sgl[sg_len++];
+ sg_dma_address(sg) = phys_addr;
+ sg_dma_len(sg) = part1_len;
+
+ phys_addr += part1_len;
+ }
+
+ if (part2_len) {
+ sg = &sgl[sg_len++];
+ sg_dma_address(sg) = phys_addr;
+ sg_dma_len(sg) = part2_len;
+ }
+
+ /*
+ * save tx_len so atmel_complete_tx_dma() will increase
+ * xmit->tail correctly
+ */
+ atmel_port->tx_len = tx_len;
desc = dmaengine_prep_slave_sg(chan,
- sg,
- 1,
+ sgl,
+ sg_len,
DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT |
DMA_CTRL_ACK);
@@ -816,7 +886,7 @@ static void atmel_tx_dma(struct uart_port *port)
return;
}
- dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE);
+ dma_sync_sg_for_device(port->dev, sg_tx, 1, DMA_TO_DEVICE);
atmel_port->desc_tx = desc;
desc->callback = atmel_complete_tx_dma;
@@ -857,7 +927,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port)
sg_set_page(&atmel_port->sg_tx,
virt_to_page(port->state->xmit.buf),
UART_XMIT_SIZE,
- (int)port->state->xmit.buf & ~PAGE_MASK);
+ (unsigned long)port->state->xmit.buf & ~PAGE_MASK);
nent = dma_map_sg(port->dev,
&atmel_port->sg_tx,
1,
@@ -867,16 +937,18 @@ static int atmel_prepare_tx_dma(struct uart_port *port)
dev_dbg(port->dev, "need to release resource of dma\n");
goto chan_err;
} else {
- dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
+ dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__,
sg_dma_len(&atmel_port->sg_tx),
port->state->xmit.buf,
- sg_dma_address(&atmel_port->sg_tx));
+ &sg_dma_address(&atmel_port->sg_tx));
}
/* Configure the slave DMA */
memset(&config, 0, sizeof(config));
config.direction = DMA_MEM_TO_DEV;
- config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ config.dst_addr_width = (atmel_port->fifo_size) ?
+ DMA_SLAVE_BUSWIDTH_4_BYTES :
+ DMA_SLAVE_BUSWIDTH_1_BYTE;
config.dst_addr = port->mapbase + ATMEL_US_THR;
config.dst_maxburst = 1;
@@ -934,14 +1006,14 @@ static void atmel_rx_from_dma(struct uart_port *port)
/* Reset the UART timeout early so that we don't miss one */
- UART_PUT_CR(port, ATMEL_US_STTTO);
+ atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_STTTO);
dmastat = dmaengine_tx_status(chan,
atmel_port->cookie_rx,
&state);
/* Restart a new tasklet if DMA status is error */
if (dmastat == DMA_ERROR) {
dev_dbg(port->dev, "Get residue error, restart tasklet\n");
- UART_PUT_IER(port, ATMEL_US_TIMEOUT);
+ atmel_uart_writel(port, ATMEL_US_IER, ATMEL_US_TIMEOUT);
tasklet_schedule(&atmel_port->tasklet);
return;
}
@@ -1007,7 +1079,7 @@ static void atmel_rx_from_dma(struct uart_port *port)
tty_flip_buffer_push(tport);
spin_lock(&port->lock);
- UART_PUT_IER(port, ATMEL_US_TIMEOUT);
+ atmel_uart_writel(port, ATMEL_US_IER, ATMEL_US_TIMEOUT);
}
static int atmel_prepare_rx_dma(struct uart_port *port)
@@ -1037,7 +1109,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
sg_set_page(&atmel_port->sg_rx,
virt_to_page(ring->buf),
sizeof(struct atmel_uart_char) * ATMEL_SERIAL_RINGSIZE,
- (int)ring->buf & ~PAGE_MASK);
+ (unsigned long)ring->buf & ~PAGE_MASK);
nent = dma_map_sg(port->dev,
&atmel_port->sg_rx,
1,
@@ -1047,10 +1119,10 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
dev_dbg(port->dev, "need to release resource of dma\n");
goto chan_err;
} else {
- dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
+ dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n", __func__,
sg_dma_len(&atmel_port->sg_rx),
ring->buf,
- sg_dma_address(&atmel_port->sg_rx));
+ &sg_dma_address(&atmel_port->sg_rx));
}
/* Configure the slave DMA */
@@ -1117,8 +1189,8 @@ atmel_handle_receive(struct uart_port *port, unsigned int pending)
* the moment.
*/
if (pending & (ATMEL_US_ENDRX | ATMEL_US_TIMEOUT)) {
- UART_PUT_IDR(port, (ATMEL_US_ENDRX
- | ATMEL_US_TIMEOUT));
+ atmel_uart_writel(port, ATMEL_US_IDR,
+ (ATMEL_US_ENDRX | ATMEL_US_TIMEOUT));
tasklet_schedule(&atmel_port->tasklet);
}
@@ -1129,7 +1201,8 @@ atmel_handle_receive(struct uart_port *port, unsigned int pending)
if (atmel_use_dma_rx(port)) {
if (pending & ATMEL_US_TIMEOUT) {
- UART_PUT_IDR(port, ATMEL_US_TIMEOUT);
+ atmel_uart_writel(port, ATMEL_US_IDR,
+ ATMEL_US_TIMEOUT);
tasklet_schedule(&atmel_port->tasklet);
}
}
@@ -1142,8 +1215,8 @@ atmel_handle_receive(struct uart_port *port, unsigned int pending)
* End of break detected. If it came along with a
* character, atmel_rx_chars will handle it.
*/
- UART_PUT_CR(port, ATMEL_US_RSTSTA);
- UART_PUT_IDR(port, ATMEL_US_RXBRK);
+ atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA);
+ atmel_uart_writel(port, ATMEL_US_IDR, ATMEL_US_RXBRK);
atmel_port->break_active = 0;
}
}
@@ -1158,7 +1231,8 @@ atmel_handle_transmit(struct uart_port *port, unsigned int pending)
if (pending & atmel_port->tx_done_mask) {
/* Either PDC or interrupt transmission */
- UART_PUT_IDR(port, atmel_port->tx_done_mask);
+ atmel_uart_writel(port, ATMEL_US_IDR,
+ atmel_port->tx_done_mask);
tasklet_schedule(&atmel_port->tasklet);
}
}
@@ -1175,6 +1249,9 @@ atmel_handle_status(struct uart_port *port, unsigned int pending,
if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC
| ATMEL_US_CTSIC)) {
atmel_port->irq_status = status;
+ atmel_port->status_change = atmel_port->irq_status ^
+ atmel_port->irq_status_prev;
+ atmel_port->irq_status_prev = status;
tasklet_schedule(&atmel_port->tasklet);
}
}
@@ -1193,7 +1270,7 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
do {
status = atmel_get_lines_status(port);
- mask = UART_GET_IMR(port);
+ mask = atmel_uart_readl(port, ATMEL_US_IMR);
pending = status & mask;
if (!gpio_handled) {
/*
@@ -1219,7 +1296,7 @@ static irqreturn_t atmel_interrupt(int irq, void *dev_id)
if (atmel_port->suspended) {
atmel_port->pending |= pending;
atmel_port->pending_status = status;
- UART_PUT_IDR(port, mask);
+ atmel_uart_writel(port, ATMEL_US_IDR, mask);
pm_system_wakeup();
break;
}
@@ -1256,7 +1333,7 @@ static void atmel_tx_pdc(struct uart_port *port)
int count;
/* nothing left to transmit? */
- if (UART_GET_TCR(port))
+ if (atmel_uart_readl(port, ATMEL_PDC_TCR))
return;
xmit->tail += pdc->ofs;
@@ -1268,7 +1345,7 @@ static void atmel_tx_pdc(struct uart_port *port)
/* more to transmit - setup next transfer */
/* disable PDC transmit */
- UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+ atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS);
if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) {
dma_sync_single_for_device(port->dev,
@@ -1279,12 +1356,14 @@ static void atmel_tx_pdc(struct uart_port *port)
count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
pdc->ofs = count;
- UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
- UART_PUT_TCR(port, count);
+ atmel_uart_writel(port, ATMEL_PDC_TPR,
+ pdc->dma_addr + xmit->tail);
+ atmel_uart_writel(port, ATMEL_PDC_TCR, count);
/* re-enable PDC transmit */
- UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
+ atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
/* Enable interrupts */
- UART_PUT_IER(port, atmel_port->tx_done_mask);
+ atmel_uart_writel(port, ATMEL_US_IER,
+ atmel_port->tx_done_mask);
} else {
if ((port->rs485.flags & SER_RS485_ENABLED) &&
!(port->rs485.flags & SER_RS485_RX_DURING_TX)) {
@@ -1410,10 +1489,10 @@ static void atmel_rx_from_pdc(struct uart_port *port)
do {
/* Reset the UART timeout early so that we don't miss one */
- UART_PUT_CR(port, ATMEL_US_STTTO);
+ atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_STTTO);
pdc = &atmel_port->pdc_rx[rx_idx];
- head = UART_GET_RPR(port) - pdc->dma_addr;
+ head = atmel_uart_readl(port, ATMEL_PDC_RPR) - pdc->dma_addr;
tail = pdc->ofs;
/* If the PDC has switched buffers, RPR won't contain
@@ -1456,8 +1535,8 @@ static void atmel_rx_from_pdc(struct uart_port *port)
*/
if (head >= pdc->dma_size) {
pdc->ofs = 0;
- UART_PUT_RNPR(port, pdc->dma_addr);
- UART_PUT_RNCR(port, pdc->dma_size);
+ atmel_uart_writel(port, ATMEL_PDC_RNPR, pdc->dma_addr);
+ atmel_uart_writel(port, ATMEL_PDC_RNCR, pdc->dma_size);
rx_idx = !rx_idx;
atmel_port->pdc_rx_idx = rx_idx;
@@ -1472,7 +1551,8 @@ static void atmel_rx_from_pdc(struct uart_port *port)
tty_flip_buffer_push(tport);
spin_lock(&port->lock);
- UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
+ atmel_uart_writel(port, ATMEL_US_IER,
+ ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
}
static int atmel_prepare_rx_pdc(struct uart_port *port)
@@ -1505,11 +1585,12 @@ static int atmel_prepare_rx_pdc(struct uart_port *port)
atmel_port->pdc_rx_idx = 0;
- UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
- UART_PUT_RCR(port, PDC_BUFFER_SIZE);
+ atmel_uart_writel(port, ATMEL_PDC_RPR, atmel_port->pdc_rx[0].dma_addr);
+ atmel_uart_writel(port, ATMEL_PDC_RCR, PDC_BUFFER_SIZE);
- UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
- UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
+ atmel_uart_writel(port, ATMEL_PDC_RNPR,
+ atmel_port->pdc_rx[1].dma_addr);
+ atmel_uart_writel(port, ATMEL_PDC_RNCR, PDC_BUFFER_SIZE);
return 0;
}
@@ -1521,17 +1602,14 @@ static void atmel_tasklet_func(unsigned long data)
{
struct uart_port *port = (struct uart_port *)data;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- unsigned int status;
- unsigned int status_change;
+ unsigned int status = atmel_port->irq_status;
+ unsigned int status_change = atmel_port->status_change;
/* The interrupt handler does not take the lock */
spin_lock(&port->lock);
atmel_port->schedule_tx(port);
- status = atmel_port->irq_status;
- status_change = status ^ atmel_port->irq_status_prev;
-
if (status_change & (ATMEL_US_RI | ATMEL_US_DSR
| ATMEL_US_DCD | ATMEL_US_CTS)) {
/* TODO: All reads to CSR will clear these interrupts! */
@@ -1546,7 +1624,7 @@ static void atmel_tasklet_func(unsigned long data)
wake_up_interruptible(&port->state->port.delta_msr_wait);
- atmel_port->irq_status_prev = status;
+ atmel_port->status_change = 0;
}
atmel_port->schedule_rx(port);
@@ -1604,15 +1682,15 @@ static void atmel_init_rs485(struct uart_port *port,
struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
if (np) {
+ struct serial_rs485 *rs485conf = &port->rs485;
u32 rs485_delay[2];
/* rs485 properties */
if (of_property_read_u32_array(np, "rs485-rts-delay",
rs485_delay, 2) == 0) {
- struct serial_rs485 *rs485conf = &port->rs485;
-
rs485conf->delay_rts_before_send = rs485_delay[0];
rs485conf->delay_rts_after_send = rs485_delay[1];
rs485conf->flags = 0;
+ }
if (of_get_property(np, "rs485-rx-during-tx", NULL))
rs485conf->flags |= SER_RS485_RX_DURING_TX;
@@ -1620,7 +1698,6 @@ static void atmel_init_rs485(struct uart_port *port,
if (of_get_property(np, "linux,rs485-enabled-at-boot-time",
NULL))
rs485conf->flags |= SER_RS485_ENABLED;
- }
} else {
port->rs485 = pdata->rs485;
}
@@ -1666,7 +1743,7 @@ static void atmel_set_ops(struct uart_port *port)
static void atmel_get_ip_name(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- int name = UART_GET_IP_NAME(port);
+ int name = atmel_uart_readl(port, ATMEL_US_NAME);
u32 version;
int usart, uart;
/* usart and uart ascii */
@@ -1683,7 +1760,7 @@ static void atmel_get_ip_name(struct uart_port *port)
atmel_port->is_usart = false;
} else {
/* fallback for older SoCs: use version field */
- version = UART_GET_IP_VERSION(port);
+ version = atmel_uart_readl(port, ATMEL_US_VERSION);
switch (version) {
case 0x302:
case 0x10213:
@@ -1755,7 +1832,7 @@ static int atmel_startup(struct uart_port *port)
* request_irq() is called we could get stuck trying to
* handle an unexpected interrupt
*/
- UART_PUT_IDR(port, -1);
+ atmel_uart_writel(port, ATMEL_US_IDR, -1);
atmel_port->ms_irq_enabled = false;
/*
@@ -1796,6 +1873,32 @@ static int atmel_startup(struct uart_port *port)
atmel_set_ops(port);
}
+ /*
+ * Enable FIFO when available
+ */
+ if (atmel_port->fifo_size) {
+ unsigned int txrdym = ATMEL_US_ONE_DATA;
+ unsigned int rxrdym = ATMEL_US_ONE_DATA;
+ unsigned int fmr;
+
+ atmel_uart_writel(port, ATMEL_US_CR,
+ ATMEL_US_FIFOEN |
+ ATMEL_US_RXFCLR |
+ ATMEL_US_TXFLCLR);
+
+ if (atmel_use_dma_tx(port))
+ txrdym = ATMEL_US_FOUR_DATA;
+
+ fmr = ATMEL_US_TXRDYM(txrdym) | ATMEL_US_RXRDYM(rxrdym);
+ if (atmel_port->rts_high &&
+ atmel_port->rts_low)
+ fmr |= ATMEL_US_FRTSC |
+ ATMEL_US_RXFTHRES(atmel_port->rts_high) |
+ ATMEL_US_RXFTHRES2(atmel_port->rts_low);
+
+ atmel_uart_writel(port, ATMEL_US_FMR, fmr);
+ }
+
/* Save current CSR for comparison in atmel_tasklet_func() */
atmel_port->irq_status_prev = atmel_get_lines_status(port);
atmel_port->irq_status = atmel_port->irq_status_prev;
@@ -1803,9 +1906,9 @@ static int atmel_startup(struct uart_port *port)
/*
* Finally, enable the serial port
*/
- UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
+ atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
/* enable xmit & rcvr */
- UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
+ atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN);
setup_timer(&atmel_port->uart_timer,
atmel_uart_timer_callback,
@@ -1818,13 +1921,14 @@ static int atmel_startup(struct uart_port *port)
jiffies + uart_poll_timeout(port));
/* set USART timeout */
} else {
- UART_PUT_RTOR(port, PDC_RX_TIMEOUT);
- UART_PUT_CR(port, ATMEL_US_STTTO);
+ atmel_uart_writel(port, ATMEL_US_RTOR, PDC_RX_TIMEOUT);
+ atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_STTTO);
- UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
+ atmel_uart_writel(port, ATMEL_US_IER,
+ ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
}
/* enable PDC controller */
- UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
+ atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
} else if (atmel_use_dma_rx(port)) {
/* set UART timeout */
if (!atmel_port->is_usart) {
@@ -1832,14 +1936,15 @@ static int atmel_startup(struct uart_port *port)
jiffies + uart_poll_timeout(port));
/* set USART timeout */
} else {
- UART_PUT_RTOR(port, PDC_RX_TIMEOUT);
- UART_PUT_CR(port, ATMEL_US_STTTO);
+ atmel_uart_writel(port, ATMEL_US_RTOR, PDC_RX_TIMEOUT);
+ atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_STTTO);
- UART_PUT_IER(port, ATMEL_US_TIMEOUT);
+ atmel_uart_writel(port, ATMEL_US_IER,
+ ATMEL_US_TIMEOUT);
}
} else {
/* enable receive only */
- UART_PUT_IER(port, ATMEL_US_RXRDY);
+ atmel_uart_writel(port, ATMEL_US_IER, ATMEL_US_RXRDY);
}
return 0;
@@ -1859,7 +1964,7 @@ static void atmel_flush_buffer(struct uart_port *port)
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
if (atmel_use_pdc_tx(port)) {
- UART_PUT_TCR(port, 0);
+ atmel_uart_writel(port, ATMEL_PDC_TCR, 0);
atmel_port->pdc_tx.ofs = 0;
}
}
@@ -1891,8 +1996,8 @@ static void atmel_shutdown(struct uart_port *port)
atmel_stop_rx(port);
atmel_stop_tx(port);
- UART_PUT_CR(port, ATMEL_US_RSTSTA);
- UART_PUT_IDR(port, -1);
+ atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA);
+ atmel_uart_writel(port, ATMEL_US_IDR, -1);
/*
@@ -1937,12 +2042,12 @@ static void atmel_serial_pm(struct uart_port *port, unsigned int state,
clk_prepare_enable(atmel_port->clk);
/* re-enable interrupts if we disabled some on suspend */
- UART_PUT_IER(port, atmel_port->backup_imr);
+ atmel_uart_writel(port, ATMEL_US_IER, atmel_port->backup_imr);
break;
case 3:
/* Back up the interrupt mask and disable all interrupts */
- atmel_port->backup_imr = UART_GET_IMR(port);
- UART_PUT_IDR(port, -1);
+ atmel_port->backup_imr = atmel_uart_readl(port, ATMEL_US_IMR);
+ atmel_uart_writel(port, ATMEL_US_IDR, -1);
/*
* Disable the peripheral clock for this serial port.
@@ -1965,7 +2070,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
unsigned int old_mode, mode, imr, quot, baud;
/* save the current mode register */
- mode = old_mode = UART_GET_MR(port);
+ mode = old_mode = atmel_uart_readl(port, ATMEL_US_MR);
/* reset the mode, clock divisor, parity, stop bits and data size */
mode &= ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP |
@@ -2024,7 +2129,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
if (atmel_use_pdc_rx(port))
/* need to enable error interrupts */
- UART_PUT_IER(port, port->read_status_mask);
+ atmel_uart_writel(port, ATMEL_US_IER, port->read_status_mask);
/*
* Characters to ignore
@@ -2051,15 +2156,16 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
* transmitter is empty if requested by the caller, so there's
* no need to wait for it here.
*/
- imr = UART_GET_IMR(port);
- UART_PUT_IDR(port, -1);
+ imr = atmel_uart_readl(port, ATMEL_US_IMR);
+ atmel_uart_writel(port, ATMEL_US_IDR, -1);
/* disable receiver and transmitter */
- UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
+ atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
/* mode */
if (port->rs485.flags & SER_RS485_ENABLED) {
- UART_PUT_TTGR(port, port->rs485.delay_rts_after_send);
+ atmel_uart_writel(port, ATMEL_US_TTGR,
+ port->rs485.delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
} else if (termios->c_cflag & CRTSCTS) {
/* RS232 with hardware handshake (RTS/CTS) */
@@ -2070,7 +2176,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
}
/* set the mode, clock divisor, parity, stop bits and data size */
- UART_PUT_MR(port, mode);
+ atmel_uart_writel(port, ATMEL_US_MR, mode);
/*
* when switching the mode, set the RTS line state according to the
@@ -2087,16 +2193,16 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
rts_state = ATMEL_US_RTSEN;
}
- UART_PUT_CR(port, rts_state);
+ atmel_uart_writel(port, ATMEL_US_CR, rts_state);
}
/* set the baud rate */
- UART_PUT_BRGR(port, quot);
- UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
- UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
+ atmel_uart_writel(port, ATMEL_US_BRGR, quot);
+ atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
+ atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN);
/* restore interrupts */
- UART_PUT_IER(port, imr);
+ atmel_uart_writel(port, ATMEL_US_IER, imr);
/* CTS flow-control and modem-status interrupts */
if (UART_ENABLE_MS(port, termios->c_cflag))
@@ -2195,7 +2301,7 @@ static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser)
ret = -EINVAL;
if (port->uartclk / 16 != ser->baud_base)
ret = -EINVAL;
- if ((void *)port->mapbase != ser->iomem_base)
+ if (port->mapbase != (unsigned long)ser->iomem_base)
ret = -EINVAL;
if (port->iobase != ser->port)
ret = -EINVAL;
@@ -2207,18 +2313,18 @@ static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser)
#ifdef CONFIG_CONSOLE_POLL
static int atmel_poll_get_char(struct uart_port *port)
{
- while (!(UART_GET_CSR(port) & ATMEL_US_RXRDY))
+ while (!(atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_RXRDY))
cpu_relax();
- return UART_GET_CHAR(port);
+ return atmel_uart_read_char(port);
}
static void atmel_poll_put_char(struct uart_port *port, unsigned char ch)
{
- while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
+ while (!(atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXRDY))
cpu_relax();
- UART_PUT_CHAR(port, ch);
+ atmel_uart_write_char(port, ch);
}
#endif
@@ -2323,9 +2429,9 @@ struct platform_device *atmel_default_console_device; /* the serial console devi
#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
static void atmel_console_putchar(struct uart_port *port, int ch)
{
- while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
+ while (!(atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXRDY))
cpu_relax();
- UART_PUT_CHAR(port, ch);
+ atmel_uart_write_char(port, ch);
}
/*
@@ -2341,12 +2447,13 @@ static void atmel_console_write(struct console *co, const char *s, u_int count)
/*
* First, save IMR and then disable interrupts
*/
- imr = UART_GET_IMR(port);
- UART_PUT_IDR(port, ATMEL_US_RXRDY | atmel_port->tx_done_mask);
+ imr = atmel_uart_readl(port, ATMEL_US_IMR);
+ atmel_uart_writel(port, ATMEL_US_IDR,
+ ATMEL_US_RXRDY | atmel_port->tx_done_mask);
/* Store PDC transmit status and disable it */
- pdc_tx = UART_GET_PTSR(port) & ATMEL_PDC_TXTEN;
- UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
+ pdc_tx = atmel_uart_readl(port, ATMEL_PDC_PTSR) & ATMEL_PDC_TXTEN;
+ atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS);
uart_console_write(port, s, count, atmel_console_putchar);
@@ -2355,15 +2462,15 @@ static void atmel_console_write(struct console *co, const char *s, u_int count)
* and restore IMR
*/
do {
- status = UART_GET_CSR(port);
+ status = atmel_uart_readl(port, ATMEL_US_CSR);
} while (!(status & ATMEL_US_TXRDY));
/* Restore PDC transmit status */
if (pdc_tx)
- UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
+ atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
/* set interrupts back the way they were */
- UART_PUT_IER(port, imr);
+ atmel_uart_writel(port, ATMEL_US_IER, imr);
}
/*
@@ -2379,17 +2486,17 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud,
* If the baud rate generator isn't running, the port wasn't
* initialized by the boot loader.
*/
- quot = UART_GET_BRGR(port) & ATMEL_US_CD;
+ quot = atmel_uart_readl(port, ATMEL_US_BRGR) & ATMEL_US_CD;
if (!quot)
return;
- mr = UART_GET_MR(port) & ATMEL_US_CHRL;
+ mr = atmel_uart_readl(port, ATMEL_US_MR) & ATMEL_US_CHRL;
if (mr == ATMEL_US_CHRL_8)
*bits = 8;
else
*bits = 7;
- mr = UART_GET_MR(port) & ATMEL_US_PAR;
+ mr = atmel_uart_readl(port, ATMEL_US_MR) & ATMEL_US_PAR;
if (mr == ATMEL_US_PAR_EVEN)
*parity = 'e';
else if (mr == ATMEL_US_PAR_ODD)
@@ -2422,9 +2529,9 @@ static int __init atmel_console_setup(struct console *co, char *options)
if (ret)
return ret;
- UART_PUT_IDR(port, -1);
- UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
- UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
+ atmel_uart_writel(port, ATMEL_US_IDR, -1);
+ atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
+ atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN | ATMEL_US_RXEN);
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -2531,7 +2638,8 @@ static int atmel_serial_suspend(struct platform_device *pdev,
if (atmel_is_console_port(port) && console_suspend_enabled) {
/* Drain the TX shifter */
- while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY))
+ while (!(atmel_uart_readl(port, ATMEL_US_CSR) &
+ ATMEL_US_TXEMPTY))
cpu_relax();
}
@@ -2583,7 +2691,7 @@ static int atmel_init_gpios(struct atmel_uart_port *p, struct device *dev)
enum mctrl_gpio_idx i;
struct gpio_desc *gpiod;
- p->gpios = mctrl_gpio_init(dev, 0);
+ p->gpios = mctrl_gpio_init_noauto(dev, 0);
if (IS_ERR(p->gpios))
return PTR_ERR(p->gpios);
@@ -2598,6 +2706,48 @@ static int atmel_init_gpios(struct atmel_uart_port *p, struct device *dev)
return 0;
}
+static void atmel_serial_probe_fifos(struct atmel_uart_port *port,
+ struct platform_device *pdev)
+{
+ port->fifo_size = 0;
+ port->rts_low = 0;
+ port->rts_high = 0;
+
+ if (of_property_read_u32(pdev->dev.of_node,
+ "atmel,fifo-size",
+ &port->fifo_size))
+ return;
+
+ if (!port->fifo_size)
+ return;
+
+ if (port->fifo_size < ATMEL_MIN_FIFO_SIZE) {
+ port->fifo_size = 0;
+ dev_err(&pdev->dev, "Invalid FIFO size\n");
+ return;
+ }
+
+ /*
+ * 0 <= rts_low <= rts_high <= fifo_size
+ * Once their CTS line asserted by the remote peer, some x86 UARTs tend
+ * to flush their internal TX FIFO, commonly up to 16 data, before
+ * actually stopping to send new data. So we try to set the RTS High
+ * Threshold to a reasonably high value respecting this 16 data
+ * empirical rule when possible.
+ */
+ port->rts_high = max_t(int, port->fifo_size >> 1,
+ port->fifo_size - ATMEL_RTS_HIGH_OFFSET);
+ port->rts_low = max_t(int, port->fifo_size >> 2,
+ port->fifo_size - ATMEL_RTS_LOW_OFFSET);
+
+ dev_info(&pdev->dev, "Using FIFO (%u data)\n",
+ port->fifo_size);
+ dev_dbg(&pdev->dev, "RTS High Threshold : %2u data\n",
+ port->rts_high);
+ dev_dbg(&pdev->dev, "RTS Low Threshold : %2u data\n",
+ port->rts_low);
+}
+
static int atmel_serial_probe(struct platform_device *pdev)
{
struct atmel_uart_port *port;
@@ -2634,13 +2784,14 @@ static int atmel_serial_probe(struct platform_device *pdev)
port = &atmel_ports[ret];
port->backup_imr = 0;
port->uart.line = ret;
+ atmel_serial_probe_fifos(port, pdev);
spin_lock_init(&port->lock_suspended);
ret = atmel_init_gpios(port, &pdev->dev);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to initialize GPIOs.");
- goto err;
+ goto err_clear_bit;
}
ret = atmel_init_port(port, pdev);
@@ -2683,8 +2834,9 @@ static int atmel_serial_probe(struct platform_device *pdev)
clk_prepare_enable(port->clk);
if (rs485_enabled) {
- UART_PUT_MR(&port->uart, ATMEL_US_USMODE_NORMAL);
- UART_PUT_CR(&port->uart, ATMEL_US_RTSEN);
+ atmel_uart_writel(&port->uart, ATMEL_US_MR,
+ ATMEL_US_USMODE_NORMAL);
+ atmel_uart_writel(&port->uart, ATMEL_US_CR, ATMEL_US_RTSEN);
}
/*
diff --git a/kernel/drivers/tty/serial/bcm63xx_uart.c b/kernel/drivers/tty/serial/bcm63xx_uart.c
index 681e0f3d5..a1c0a89d9 100644
--- a/kernel/drivers/tty/serial/bcm63xx_uart.c
+++ b/kernel/drivers/tty/serial/bcm63xx_uart.c
@@ -474,7 +474,7 @@ static int bcm_uart_startup(struct uart_port *port)
/* register irq and enable rx interrupts */
ret = request_irq(port->irq, bcm_uart_interrupt, 0,
- bcm_uart_type(port), port);
+ dev_name(port->dev), port);
if (ret)
return ret;
bcm_uart_writel(port, UART_RX_INT_MASK, UART_IR_REG);
diff --git a/kernel/drivers/tty/serial/bfin_uart.c b/kernel/drivers/tty/serial/bfin_uart.c
index 155781ece..ae3cf94b1 100644
--- a/kernel/drivers/tty/serial/bfin_uart.c
+++ b/kernel/drivers/tty/serial/bfin_uart.c
@@ -74,8 +74,8 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart);
static void bfin_serial_reset_irda(struct uart_port *port);
-#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
- defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
+#if defined(SERIAL_BFIN_CTSRTS) || \
+ defined(SERIAL_BFIN_HARD_CTSRTS)
static unsigned int bfin_serial_get_mctrl(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
@@ -110,7 +110,7 @@ static irqreturn_t bfin_serial_mctrl_cts_int(int irq, void *dev_id)
struct bfin_serial_port *uart = dev_id;
struct uart_port *uport = &uart->port;
unsigned int status = bfin_serial_get_mctrl(uport);
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
+#ifdef SERIAL_BFIN_HARD_CTSRTS
UART_CLEAR_SCTS(uart);
if (uport->hw_stopped) {
@@ -700,7 +700,7 @@ static int bfin_serial_startup(struct uart_port *port)
# endif
#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+#ifdef SERIAL_BFIN_CTSRTS
if (uart->cts_pin >= 0) {
if (request_irq(gpio_to_irq(uart->cts_pin),
bfin_serial_mctrl_cts_int,
@@ -718,7 +718,7 @@ static int bfin_serial_startup(struct uart_port *port)
gpio_direction_output(uart->rts_pin, 0);
}
#endif
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
+#ifdef SERIAL_BFIN_HARD_CTSRTS
if (uart->cts_pin >= 0) {
if (request_irq(uart->status_irq, bfin_serial_mctrl_cts_int,
0, "BFIN_UART_MODEM_STATUS", uart)) {
@@ -766,13 +766,13 @@ static void bfin_serial_shutdown(struct uart_port *port)
free_irq(uart->tx_irq, uart);
#endif
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+#ifdef SERIAL_BFIN_CTSRTS
if (uart->cts_pin >= 0)
free_irq(gpio_to_irq(uart->cts_pin), uart);
if (uart->rts_pin >= 0)
gpio_free(uart->rts_pin);
#endif
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
+#ifdef SERIAL_BFIN_HARD_CTSRTS
if (uart->cts_pin >= 0)
free_irq(uart->status_irq, uart);
#endif
@@ -788,7 +788,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
unsigned int ier, lcr = 0;
unsigned long timeout;
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+#ifdef SERIAL_BFIN_CTSRTS
if (old == NULL && uart->cts_pin != -1)
termios->c_cflag |= CRTSCTS;
else if (uart->cts_pin == -1)
@@ -1110,8 +1110,8 @@ bfin_serial_console_setup(struct console *co, char *options)
int baud = 57600;
int bits = 8;
int parity = 'n';
-# if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
- defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
+# if defined(SERIAL_BFIN_CTSRTS) || \
+ defined(SERIAL_BFIN_HARD_CTSRTS)
int flow = 'r';
# else
int flow = 'n';
@@ -1322,8 +1322,8 @@ static int bfin_serial_probe(struct platform_device *pdev)
init_timer(&(uart->rx_dma_timer));
#endif
-#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \
- defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS)
+#if defined(SERIAL_BFIN_CTSRTS) || \
+ defined(SERIAL_BFIN_HARD_CTSRTS)
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (res == NULL)
uart->cts_pin = -1;
diff --git a/kernel/drivers/tty/serial/clps711x.c b/kernel/drivers/tty/serial/clps711x.c
index d5d2dd7c7..b3a4e0cdd 100644
--- a/kernel/drivers/tty/serial/clps711x.c
+++ b/kernel/drivers/tty/serial/clps711x.c
@@ -500,7 +500,7 @@ static int uart_clps711x_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, s);
- s->gpios = mctrl_gpio_init(&pdev->dev, 0);
+ s->gpios = mctrl_gpio_init_noauto(&pdev->dev, 0);
if (IS_ERR(s->gpios))
return PTR_ERR(s->gpios);
diff --git a/kernel/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/kernel/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index 08431adea..d3e3d42c0 100644
--- a/kernel/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/kernel/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -1450,6 +1450,7 @@ static const struct of_device_id cpm_uart_match[] = {
},
{}
};
+MODULE_DEVICE_TABLE(of, cpm_uart_match);
static struct platform_driver cpm_uart_driver = {
.driver = {
diff --git a/kernel/drivers/tty/serial/crisv10.c b/kernel/drivers/tty/serial/crisv10.c
index 0c1825b0b..f13f2ebd2 100644
--- a/kernel/drivers/tty/serial/crisv10.c
+++ b/kernel/drivers/tty/serial/crisv10.c
@@ -56,10 +56,6 @@ static char *serial_version = "$Revision: 1.25 $";
#error "RX_TIMEOUT_TICKS == 0 not allowed, use 1"
#endif
-#if defined(CONFIG_ETRAX_RS485_ON_PA) && defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-#error "Disable either CONFIG_ETRAX_RS485_ON_PA or CONFIG_ETRAX_RS485_ON_PORT_G"
-#endif
-
/*
* All of the compatibilty code so we can compile serial.c against
* older kernels is hidden in serial_compat.h
@@ -455,30 +451,6 @@ static struct e100_serial rs_table[] = {
static struct fast_timer fast_timers[NR_PORTS];
#endif
-#ifdef CONFIG_ETRAX_SERIAL_PROC_ENTRY
-#define PROCSTAT(x) x
-struct ser_statistics_type {
- int overrun_cnt;
- int early_errors_cnt;
- int ser_ints_ok_cnt;
- int errors_cnt;
- unsigned long int processing_flip;
- unsigned long processing_flip_still_room;
- unsigned long int timeout_flush_cnt;
- int rx_dma_ints;
- int tx_dma_ints;
- int rx_tot;
- int tx_tot;
-};
-
-static struct ser_statistics_type ser_stat[NR_PORTS];
-
-#else
-
-#define PROCSTAT(x)
-
-#endif /* CONFIG_ETRAX_SERIAL_PROC_ENTRY */
-
/* RS-485 */
#if defined(CONFIG_ETRAX_RS485)
#ifdef CONFIG_ETRAX_FAST_TIMER
@@ -487,9 +459,6 @@ static struct fast_timer fast_timers_rs485[NR_PORTS];
#if defined(CONFIG_ETRAX_RS485_ON_PA)
static int rs485_pa_bit = CONFIG_ETRAX_RS485_ON_PA_BIT;
#endif
-#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-static int rs485_port_g_bit = CONFIG_ETRAX_RS485_ON_PORT_G_BIT;
-#endif
#endif
/* Info and macros needed for each ports extra control/status signals. */
@@ -739,10 +708,10 @@ static unsigned char dummy_ser[NR_PORTS] = {0xFF, 0xFF, 0xFF,0xFF};
defined(CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED) || \
defined(CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED) || \
defined(CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED)
-#define CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED
+#define ETRAX_SERX_DTR_RI_DSR_CD_MIXED
#endif
-#ifdef CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED
+#ifdef ETRAX_SERX_DTR_RI_DSR_CD_MIXED
/* The pins can be mixed on PA and PB */
#define CONTROL_PINS_PORT_NOT_USED(line) \
&dummy_ser[line], &dummy_ser[line], \
@@ -835,7 +804,7 @@ static const struct control_pins e100_modem_pins[NR_PORTS] =
#endif
}
};
-#else /* CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED */
+#else /* ETRAX_SERX_DTR_RI_DSR_CD_MIXED */
/* All pins are on either PA or PB for each serial port */
#define CONTROL_PINS_PORT_NOT_USED(line) \
@@ -917,7 +886,7 @@ static const struct control_pins e100_modem_pins[NR_PORTS] =
#endif
}
};
-#endif /* !CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED */
+#endif /* !ETRAX_SERX_DTR_RI_DSR_CD_MIXED */
#define E100_RTS_MASK 0x20
#define E100_CTS_MASK 0x40
@@ -1367,16 +1336,6 @@ e100_enable_rs485(struct tty_struct *tty, struct serial_rs485 *r)
#if defined(CONFIG_ETRAX_RS485_ON_PA)
*R_PORT_PA_DATA = port_pa_data_shadow |= (1 << rs485_pa_bit);
#endif
-#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
- REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
- rs485_port_g_bit, 1);
-#endif
-#if defined(CONFIG_ETRAX_RS485_LTC1387)
- REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
- CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 1);
- REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
- CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 1);
-#endif
info->rs485 = *r;
@@ -1676,7 +1635,8 @@ alloc_recv_buffer(unsigned int size)
{
struct etrax_recv_buffer *buffer;
- if (!(buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC)))
+ buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC);
+ if (!buffer)
return NULL;
buffer->next = NULL;
@@ -1712,7 +1672,8 @@ add_char_and_flag(struct e100_serial *info, unsigned char data, unsigned char fl
{
struct etrax_recv_buffer *buffer;
if (info->uses_dma_in) {
- if (!(buffer = alloc_recv_buffer(4)))
+ buffer = alloc_recv_buffer(4);
+ if (!buffer)
return 0;
buffer->length = 1;
@@ -1750,7 +1711,8 @@ static unsigned int handle_descr_data(struct e100_serial *info,
append_recv_buffer(info, buffer);
- if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE)))
+ buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE);
+ if (!buffer)
panic("%s: Failed to allocate memory for receive buffer!\n", __func__);
descr->buf = virt_to_phys(buffer->buffer);
@@ -1841,7 +1803,6 @@ static void receive_chars_dma(struct e100_serial *info)
*/
unsigned char data = info->ioport[REG_DATA];
- PROCSTAT(ser_stat[info->line].errors_cnt++);
DEBUG_LOG(info->line, "#dERR: s d 0x%04X\n",
((rstat & SER_ERROR_MASK) << 8) | data);
@@ -1867,7 +1828,8 @@ static int start_recv_dma(struct e100_serial *info)
/* Set up the receiving descriptors */
for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) {
- if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE)))
+ buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE);
+ if (!buffer)
panic("%s: Failed to allocate memory for receive buffer!\n", __func__);
descr[i].ctrl = d_int;
@@ -1943,7 +1905,6 @@ tr_interrupt(int irq, void *dev_id)
/* Read jiffies_usec first,
* we want this time to be as late as possible
*/
- PROCSTAT(ser_stat[info->line].tx_dma_ints++);
info->last_tx_active_usec = GET_JIFFIES_USEC();
info->last_tx_active = jiffies;
transmit_chars_dma(info);
@@ -2022,7 +1983,6 @@ static int force_eop_if_needed(struct e100_serial *info)
*/
if (!info->forced_eop) {
info->forced_eop = 1;
- PROCSTAT(ser_stat[info->line].timeout_flush_cnt++);
TIMERD(DEBUG_LOG(info->line, "timeout EOP %i\n", info->line));
FORCE_EOP(info);
}
@@ -2374,7 +2334,6 @@ static void handle_ser_rx_interrupt(struct e100_serial *info)
DEBUG_LOG(info->line, "#iERR s d %04X\n",
((rstat & SER_ERROR_MASK) << 8) | data);
}
- PROCSTAT(ser_stat[info->line].early_errors_cnt++);
} else { /* It was a valid byte, now let the DMA do the rest */
unsigned long curr_time_u = GET_JIFFIES_USEC();
unsigned long curr_time = jiffies;
@@ -2407,7 +2366,6 @@ static void handle_ser_rx_interrupt(struct e100_serial *info)
DINTR2(DEBUG_LOG(info->line, "ser_rx OK %d\n", info->line));
info->break_detected_cnt = 0;
- PROCSTAT(ser_stat[info->line].ser_ints_ok_cnt++);
}
/* Restarting the DMA never hurts */
*info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart);
@@ -2867,19 +2825,6 @@ change_speed(struct e100_serial *info)
*R_SERIAL_PRESCALE = divisor;
info->baud = SERIAL_PRESCALE_BASE/divisor;
}
-#ifdef CONFIG_ETRAX_EXTERN_PB6CLK_ENABLED
- else if ((info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8 &&
- info->custom_divisor == 1) ||
- (info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ &&
- info->custom_divisor == 8)) {
- /* ext_clk selected */
- alt_source =
- IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, extern) |
- IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, extern);
- DBAUD(printk("using external baudrate: %lu\n", CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8));
- info->baud = CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8;
- }
-#endif
else
{
/* Bad baudbase, we don't support using timer0
@@ -3216,9 +3161,7 @@ rs_throttle(struct tty_struct * tty)
{
struct e100_serial *info = (struct e100_serial *)tty->driver_data;
#ifdef SERIAL_DEBUG_THROTTLE
- char buf[64];
-
- printk("throttle %s: %lu....\n", tty_name(tty, buf),
+ printk("throttle %s: %lu....\n", tty_name(tty),
(unsigned long)tty->ldisc.chars_in_buffer(tty));
#endif
DFLOW(DEBUG_LOG(info->line,"rs_throttle %lu\n", tty->ldisc.chars_in_buffer(tty)));
@@ -3238,9 +3181,7 @@ rs_unthrottle(struct tty_struct * tty)
{
struct e100_serial *info = (struct e100_serial *)tty->driver_data;
#ifdef SERIAL_DEBUG_THROTTLE
- char buf[64];
-
- printk("unthrottle %s: %lu....\n", tty_name(tty, buf),
+ printk("unthrottle %s: %lu....\n", tty_name(tty),
(unsigned long)tty->ldisc.chars_in_buffer(tty));
#endif
DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc %d\n", tty->ldisc.chars_in_buffer(tty)));
@@ -3714,7 +3655,6 @@ rs_close(struct tty_struct *tty, struct file * filp)
wake_up_interruptible(&info->port.open_wait);
}
info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&info->port.close_wait);
local_irq_restore(flags);
/* port closed */
@@ -3725,16 +3665,6 @@ rs_close(struct tty_struct *tty, struct file * filp)
#if defined(CONFIG_ETRAX_RS485_ON_PA)
*R_PORT_PA_DATA = port_pa_data_shadow &= ~(1 << rs485_pa_bit);
#endif
-#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
- REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
- rs485_port_g_bit, 0);
-#endif
-#if defined(CONFIG_ETRAX_RS485_LTC1387)
- REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
- CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 0);
- REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow,
- CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 0);
-#endif
}
#endif
@@ -3828,23 +3758,6 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
int do_clocal = 0;
/*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (info->port.flags & ASYNC_CLOSING) {
- wait_event_interruptible_tty(tty, info->port.close_wait,
- !(info->port.flags & ASYNC_CLOSING));
-#ifdef SERIAL_DO_RESTART
- if (info->port.flags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- else
- return -ERESTARTSYS;
-#else
- return -EAGAIN;
-#endif
- }
-
- /*
* If non-blocking mode is set, or the port is not enabled,
* then make the check up front and then exit.
*/
@@ -3894,7 +3807,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp,
#endif
break;
}
- if (!(info->port.flags & ASYNC_CLOSING) && do_clocal)
+ if (do_clocal)
/* && (do_clocal || DCD_IS_ASSERTED) */
break;
if (signal_pending(current)) {
@@ -3964,20 +3877,6 @@ rs_open(struct tty_struct *tty, struct file * filp)
info->port.low_latency = !!(info->port.flags & ASYNC_LOW_LATENCY);
/*
- * If the port is in the middle of closing, bail out now
- */
- if (info->port.flags & ASYNC_CLOSING) {
- wait_event_interruptible_tty(tty, info->port.close_wait,
- !(info->port.flags & ASYNC_CLOSING));
-#ifdef SERIAL_DO_RESTART
- return ((info->port.flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS);
-#else
- return -EAGAIN;
-#endif
- }
-
- /*
* If DMA is enabled try to allocate the irq's.
*/
if (info->port.count == 1) {
@@ -4263,15 +4162,6 @@ static int __init rs_init(void)
return -EBUSY;
}
#endif
-#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
- if (cris_io_interface_allocate_pins(if_serial_0, 'g', rs485_pa_bit,
- rs485_port_g_bit)) {
- printk(KERN_ERR "ETRAX100LX serial: Could not allocate "
- "RS485 pin\n");
- put_tty_driver(driver);
- return -EBUSY;
- }
-#endif
#endif
/* Initialize the tty_driver structure */
diff --git a/kernel/drivers/tty/serial/earlycon.c b/kernel/drivers/tty/serial/earlycon.c
index 6dc471e30..b5b2f2be6 100644
--- a/kernel/drivers/tty/serial/earlycon.c
+++ b/kernel/drivers/tty/serial/earlycon.c
@@ -72,6 +72,7 @@ static int __init parse_options(struct earlycon_device *device, char *options)
switch (port->iotype) {
case UPIO_MEM32:
+ case UPIO_MEM32BE:
port->regshift = 2; /* fall-through */
case UPIO_MEM:
port->mapbase = addr;
@@ -90,9 +91,11 @@ static int __init parse_options(struct earlycon_device *device, char *options)
strlcpy(device->options, options, length);
}
- if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM32)
+ if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM32 ||
+ port->iotype == UPIO_MEM32BE)
pr_info("Early serial console at MMIO%s 0x%llx (options '%s')\n",
- (port->iotype == UPIO_MEM32) ? "32" : "",
+ (port->iotype == UPIO_MEM) ? "" :
+ (port->iotype == UPIO_MEM32) ? "32" : "32be",
(unsigned long long)port->mapbase,
device->options);
else
@@ -112,6 +115,7 @@ static int __init register_earlycon(char *buf, const struct earlycon_id *match)
if (buf && !parse_options(&early_console_dev, buf))
buf = NULL;
+ spin_lock_init(&port->lock);
port->uartclk = BASE_BAUD * 16;
if (port->mapbase)
port->membase = earlycon_map(port->mapbase, 64);
@@ -133,7 +137,7 @@ static int __init register_earlycon(char *buf, const struct earlycon_id *match)
*
* Registers the earlycon console matching the earlycon specified
* in the param string @buf. Acceptable param strings are of the form
- * <name>,io|mmio|mmio32,<addr>,<options>
+ * <name>,io|mmio|mmio32|mmio32be,<addr>,<options>
* <name>,0x<addr>,<options>
* <name>,<options>
* <name>
@@ -199,6 +203,7 @@ int __init of_setup_earlycon(unsigned long addr,
int err;
struct uart_port *port = &early_console_dev.port;
+ spin_lock_init(&port->lock);
port->iotype = UPIO_MEM;
port->mapbase = addr;
port->uartclk = BASE_BAUD * 16;
diff --git a/kernel/drivers/tty/serial/etraxfs-uart.c b/kernel/drivers/tty/serial/etraxfs-uart.c
index a57301a6f..2f80bc7e4 100644
--- a/kernel/drivers/tty/serial/etraxfs-uart.c
+++ b/kernel/drivers/tty/serial/etraxfs-uart.c
@@ -10,6 +10,8 @@
#include <linux/of_address.h>
#include <hwregs/ser_defs.h>
+#include "serial_mctrl_gpio.h"
+
#define DRV_NAME "etraxfs-uart"
#define UART_NR CONFIG_ETRAX_SERIAL_PORTS
@@ -28,10 +30,7 @@ struct uart_cris_port {
void __iomem *regi_ser;
- struct gpio_desc *dtr_pin;
- struct gpio_desc *dsr_pin;
- struct gpio_desc *ri_pin;
- struct gpio_desc *cd_pin;
+ struct mctrl_gpios *gpios;
int write_ongoing;
};
@@ -112,17 +111,10 @@ cris_console_setup(struct console *co, char *options)
return 0;
}
-static struct tty_driver *cris_console_device(struct console *co, int *index)
-{
- struct uart_driver *p = co->data;
- *index = co->index;
- return p->tty_driver;
-}
-
static struct console cris_console = {
.name = "ttyS",
.write = cris_console_write,
- .device = cris_console_device,
+ .device = uart_console_device,
.setup = cris_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
@@ -373,14 +365,6 @@ static void etraxfs_uart_stop_rx(struct uart_port *port)
REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
}
-static void etraxfs_uart_enable_ms(struct uart_port *port)
-{
-}
-
-static void check_modem_status(struct uart_cris_port *up)
-{
-}
-
static unsigned int etraxfs_uart_tx_empty(struct uart_port *port)
{
struct uart_cris_port *up = (struct uart_cris_port *)port;
@@ -404,21 +388,9 @@ static unsigned int etraxfs_uart_get_mctrl(struct uart_port *port)
ret = 0;
if (crisv32_serial_get_rts(up))
ret |= TIOCM_RTS;
- /* DTR is active low */
- if (up->dtr_pin && !gpiod_get_raw_value(up->dtr_pin))
- ret |= TIOCM_DTR;
- /* CD is active low */
- if (up->cd_pin && !gpiod_get_raw_value(up->cd_pin))
- ret |= TIOCM_CD;
- /* RI is active low */
- if (up->ri_pin && !gpiod_get_raw_value(up->ri_pin))
- ret |= TIOCM_RI;
- /* DSR is active low */
- if (up->dsr_pin && !gpiod_get_raw_value(up->dsr_pin))
- ret |= TIOCM_DSR;
if (crisv32_serial_get_cts(up))
ret |= TIOCM_CTS;
- return ret;
+ return mctrl_gpio_get(up->gpios, &ret);
}
static void etraxfs_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
@@ -426,15 +398,7 @@ static void etraxfs_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
struct uart_cris_port *up = (struct uart_cris_port *)port;
crisv32_serial_set_rts(up, mctrl & TIOCM_RTS ? 1 : 0, 0);
- /* DTR is active low */
- if (up->dtr_pin)
- gpiod_set_raw_value(up->dtr_pin, mctrl & TIOCM_DTR ? 0 : 1);
- /* RI is active low */
- if (up->ri_pin)
- gpiod_set_raw_value(up->ri_pin, mctrl & TIOCM_RNG ? 0 : 1);
- /* CD is active low */
- if (up->cd_pin)
- gpiod_set_raw_value(up->cd_pin, mctrl & TIOCM_CD ? 0 : 1);
+ mctrl_gpio_set(up->gpios, mctrl);
}
static void etraxfs_uart_break_ctl(struct uart_port *port, int break_state)
@@ -598,7 +562,6 @@ ser_interrupt(int irq, void *dev_id)
receive_chars_no_dma(up);
handled = 1;
}
- check_modem_status(up);
if (masked_intr.tr_rdy) {
transmit_chars_no_dma(up);
@@ -862,7 +825,6 @@ static const struct uart_ops etraxfs_uart_pops = {
.start_tx = etraxfs_uart_start_tx,
.send_xchar = etraxfs_uart_send_xchar,
.stop_rx = etraxfs_uart_stop_rx,
- .enable_ms = etraxfs_uart_enable_ms,
.break_ctl = etraxfs_uart_break_ctl,
.startup = etraxfs_uart_startup,
.shutdown = etraxfs_uart_shutdown,
@@ -930,11 +892,12 @@ static int etraxfs_uart_probe(struct platform_device *pdev)
up->irq = irq_of_parse_and_map(np, 0);
up->regi_ser = of_iomap(np, 0);
- up->dtr_pin = devm_gpiod_get_optional(&pdev->dev, "dtr");
- up->dsr_pin = devm_gpiod_get_optional(&pdev->dev, "dsr");
- up->ri_pin = devm_gpiod_get_optional(&pdev->dev, "ri");
- up->cd_pin = devm_gpiod_get_optional(&pdev->dev, "cd");
up->port.dev = &pdev->dev;
+
+ up->gpios = mctrl_gpio_init_noauto(&pdev->dev, 0);
+ if (IS_ERR(up->gpios))
+ return PTR_ERR(up->gpios);
+
cris_serial_port_init(&up->port, dev_id);
etraxfs_uart_ports[dev_id] = up;
@@ -950,7 +913,7 @@ static int etraxfs_uart_remove(struct platform_device *pdev)
port = platform_get_drvdata(pdev);
uart_remove_one_port(&etraxfs_uart_driver, port);
- etraxfs_uart_ports[pdev->id] = NULL;
+ etraxfs_uart_ports[port->line] = NULL;
return 0;
}
diff --git a/kernel/drivers/tty/serial/fsl_lpuart.c b/kernel/drivers/tty/serial/fsl_lpuart.c
index 08ce76f4f..3d7900337 100644
--- a/kernel/drivers/tty/serial/fsl_lpuart.c
+++ b/kernel/drivers/tty/serial/fsl_lpuart.c
@@ -1746,6 +1746,45 @@ static struct console lpuart32_console = {
.data = &lpuart_reg,
};
+static void lpuart_early_write(struct console *con, const char *s, unsigned n)
+{
+ struct earlycon_device *dev = con->data;
+
+ uart_console_write(&dev->port, s, n, lpuart_console_putchar);
+}
+
+static void lpuart32_early_write(struct console *con, const char *s, unsigned n)
+{
+ struct earlycon_device *dev = con->data;
+
+ uart_console_write(&dev->port, s, n, lpuart32_console_putchar);
+}
+
+static int __init lpuart_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->con->write = lpuart_early_write;
+ return 0;
+}
+
+static int __init lpuart32_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->con->write = lpuart32_early_write;
+ return 0;
+}
+
+OF_EARLYCON_DECLARE(lpuart, "fsl,vf610-lpuart", lpuart_early_console_setup);
+OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1021a-lpuart", lpuart32_early_console_setup);
+EARLYCON_DECLARE(lpuart, lpuart_early_console_setup);
+EARLYCON_DECLARE(lpuart32, lpuart32_early_console_setup);
+
#define LPUART_CONSOLE (&lpuart_console)
#define LPUART32_CONSOLE (&lpuart32_console)
#else
diff --git a/kernel/drivers/tty/serial/icom.c b/kernel/drivers/tty/serial/icom.c
index 45fc323b9..ffc7cb258 100644
--- a/kernel/drivers/tty/serial/icom.c
+++ b/kernel/drivers/tty/serial/icom.c
@@ -1504,7 +1504,8 @@ static int icom_probe(struct pci_dev *dev,
return retval;
}
- if ( (retval = pci_request_regions(dev, "icom"))) {
+ retval = pci_request_regions(dev, "icom");
+ if (retval) {
dev_err(&dev->dev, "pci_request_regions FAILED\n");
pci_disable_device(dev);
return retval;
@@ -1512,7 +1513,8 @@ static int icom_probe(struct pci_dev *dev,
pci_set_master(dev);
- if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) {
+ retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg);
+ if (retval) {
dev_err(&dev->dev, "PCI Config read FAILED\n");
return retval;
}
@@ -1556,9 +1558,8 @@ static int icom_probe(struct pci_dev *dev,
}
/* save off irq and request irq line */
- if ( (retval = request_irq(dev->irq, icom_interrupt,
- IRQF_SHARED, ICOM_DRIVER_NAME,
- (void *) icom_adapter))) {
+ retval = request_irq(dev->irq, icom_interrupt, IRQF_SHARED, ICOM_DRIVER_NAME, (void *)icom_adapter);
+ if (retval) {
goto probe_exit2;
}
diff --git a/kernel/drivers/tty/serial/ifx6x60.c b/kernel/drivers/tty/serial/ifx6x60.c
index 590390970..88246f7e4 100644
--- a/kernel/drivers/tty/serial/ifx6x60.c
+++ b/kernel/drivers/tty/serial/ifx6x60.c
@@ -1175,7 +1175,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
ret = request_irq(gpio_to_irq(ifx_dev->gpio.reset_out),
ifx_spi_reset_interrupt,
IRQF_TRIGGER_RISING|IRQF_TRIGGER_FALLING, DRVNAME,
- (void *)ifx_dev);
+ ifx_dev);
if (ret) {
dev_err(&spi->dev, "Unable to get irq %x\n",
gpio_to_irq(ifx_dev->gpio.reset_out));
@@ -1185,9 +1185,8 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
ret = ifx_spi_reset(ifx_dev);
ret = request_irq(gpio_to_irq(ifx_dev->gpio.srdy),
- ifx_spi_srdy_interrupt,
- IRQF_TRIGGER_RISING, DRVNAME,
- (void *)ifx_dev);
+ ifx_spi_srdy_interrupt, IRQF_TRIGGER_RISING, DRVNAME,
+ ifx_dev);
if (ret) {
dev_err(&spi->dev, "Unable to get irq %x",
gpio_to_irq(ifx_dev->gpio.srdy));
@@ -1212,7 +1211,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
return 0;
error_ret7:
- free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), (void *)ifx_dev);
+ free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), ifx_dev);
error_ret6:
gpio_free(ifx_dev->gpio.srdy);
error_ret5:
@@ -1243,8 +1242,8 @@ static int ifx_spi_spi_remove(struct spi_device *spi)
/* stop activity */
tasklet_kill(&ifx_dev->io_work_tasklet);
/* free irq */
- free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), (void *)ifx_dev);
- free_irq(gpio_to_irq(ifx_dev->gpio.srdy), (void *)ifx_dev);
+ free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), ifx_dev);
+ free_irq(gpio_to_irq(ifx_dev->gpio.srdy), ifx_dev);
gpio_free(ifx_dev->gpio.srdy);
gpio_free(ifx_dev->gpio.mrdy);
@@ -1363,7 +1362,7 @@ static struct spi_driver ifx_spi_driver = {
.driver = {
.name = DRVNAME,
.pm = &ifx_spi_pm,
- .owner = THIS_MODULE},
+ },
.probe = ifx_spi_spi_probe,
.shutdown = ifx_spi_spi_shutdown,
.remove = ifx_spi_spi_remove,
@@ -1381,7 +1380,7 @@ static void __exit ifx_spi_exit(void)
/* unregister */
tty_unregister_driver(tty_drv);
put_tty_driver(tty_drv);
- spi_unregister_driver((void *)&ifx_spi_driver);
+ spi_unregister_driver(&ifx_spi_driver);
unregister_reboot_notifier(&ifx_modem_reboot_notifier_block);
}
@@ -1420,7 +1419,7 @@ static int __init ifx_spi_init(void)
goto err_free_tty;
}
- result = spi_register_driver((void *)&ifx_spi_driver);
+ result = spi_register_driver(&ifx_spi_driver);
if (result) {
pr_err("%s: spi_register_driver failed(%d)",
DRVNAME, result);
@@ -1436,7 +1435,7 @@ static int __init ifx_spi_init(void)
return 0;
err_unreg_spi:
- spi_unregister_driver((void *)&ifx_spi_driver);
+ spi_unregister_driver(&ifx_spi_driver);
err_unreg_tty:
tty_unregister_driver(tty_drv);
err_free_tty:
diff --git a/kernel/drivers/tty/serial/imx.c b/kernel/drivers/tty/serial/imx.c
index 01aa52f57..016e4be05 100644
--- a/kernel/drivers/tty/serial/imx.c
+++ b/kernel/drivers/tty/serial/imx.c
@@ -139,6 +139,7 @@
#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */
#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */
#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */
+#define USR1_AGTIM (1<<8) /* Ageing timer interrupt flag */
#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */
#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */
#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */
@@ -216,6 +217,8 @@ struct imx_port {
unsigned int tx_bytes;
unsigned int dma_tx_nents;
wait_queue_head_t dma_wait;
+ unsigned int saved_reg[10];
+ bool context_saved;
};
struct imx_port_ucrs {
@@ -239,7 +242,7 @@ static struct imx_uart_data imx_uart_devdata[] = {
},
};
-static struct platform_device_id imx_uart_devtype[] = {
+static const struct platform_device_id imx_uart_devtype[] = {
{
.name = "imx1-uart",
.driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX1_UART],
@@ -700,7 +703,8 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
if (sport->port.ignore_status_mask & URXD_DUMMY_READ)
goto out;
- tty_insert_flip_char(port, rx, flg);
+ if (tty_insert_flip_char(port, rx, flg) == 0)
+ sport->port.icount.buf_overrun++;
}
out:
@@ -725,11 +729,15 @@ static void imx_dma_rxint(struct imx_port *sport)
if ((temp & USR2_RDR) && !sport->dma_is_rxing) {
sport->dma_is_rxing = 1;
- /* disable the `Recerver Ready Interrrupt` */
+ /* disable the receiver ready and aging timer interrupts */
temp = readl(sport->port.membase + UCR1);
temp &= ~(UCR1_RRDYEN);
writel(temp, sport->port.membase + UCR1);
+ temp = readl(sport->port.membase + UCR2);
+ temp &= ~(UCR2_ATEN);
+ writel(temp, sport->port.membase + UCR2);
+
/* tell the DMA to receive the data. */
start_rx_dma(sport);
}
@@ -746,7 +754,7 @@ static irqreturn_t imx_int(int irq, void *dev_id)
sts = readl(sport->port.membase + USR1);
sts2 = readl(sport->port.membase + USR2);
- if (sts & USR1_RRDY) {
+ if (sts & (USR1_RRDY | USR1_AGTIM)) {
if (sport->dma_is_enabled)
imx_dma_rxint(sport);
else
@@ -766,7 +774,6 @@ static irqreturn_t imx_int(int irq, void *dev_id)
writel(USR1_AWAKE, sport->port.membase + USR1);
if (sts2 & USR2_ORE) {
- dev_err(sport->port.dev, "Rx FIFO overrun\n");
sport->port.icount.overrun++;
writel(USR2_ORE, sport->port.membase + USR2);
}
@@ -850,20 +857,6 @@ static void imx_break_ctl(struct uart_port *port, int break_state)
spin_unlock_irqrestore(&sport->port.lock, flags);
}
-#define TXTL 2 /* reset default */
-#define RXTL 1 /* reset default */
-
-static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode)
-{
- unsigned int val;
-
- /* set receiver / transmitter trigger level */
- val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE);
- val |= TXTL << UFCR_TXTL_SHF | RXTL;
- writel(val, sport->port.membase + UFCR);
- return 0;
-}
-
#define RX_BUF_SIZE (PAGE_SIZE)
static void imx_rx_dma_done(struct imx_port *sport)
{
@@ -872,11 +865,15 @@ static void imx_rx_dma_done(struct imx_port *sport)
spin_lock_irqsave(&sport->port.lock, flags);
- /* Enable this interrupt when the RXFIFO is empty. */
+ /* re-enable interrupts to get notified when new symbols are incoming */
temp = readl(sport->port.membase + UCR1);
temp |= UCR1_RRDYEN;
writel(temp, sport->port.membase + UCR1);
+ temp = readl(sport->port.membase + UCR2);
+ temp |= UCR2_ATEN;
+ writel(temp, sport->port.membase + UCR2);
+
sport->dma_is_rxing = 0;
/* Is the shutdown waiting for us? */
@@ -887,14 +884,12 @@ static void imx_rx_dma_done(struct imx_port *sport)
}
/*
- * There are three kinds of RX DMA interrupts(such as in the MX6Q):
+ * There are two kinds of RX DMA interrupts(such as in the MX6Q):
* [1] the RX DMA buffer is full.
- * [2] the Aging timer expires(wait for 8 bytes long)
- * [3] the Idle Condition Detect(enabled the UCR4_IDDMAEN).
+ * [2] the aging timer expires
*
- * The [2] is trigger when a character was been sitting in the FIFO
- * meanwhile [3] can wait for 32 bytes long when the RX line is
- * on IDLE state and RxFIFO is empty.
+ * Condition [2] is triggered when a character has been sitting in the FIFO
+ * for at least 8 byte durations.
*/
static void dma_rx_callback(void *data)
{
@@ -912,36 +907,32 @@ static void dma_rx_callback(void *data)
status = dmaengine_tx_status(chan, (dma_cookie_t)0, &state);
count = RX_BUF_SIZE - state.residue;
- if (readl(sport->port.membase + USR2) & USR2_IDLE) {
- /* In condition [3] the SDMA counted up too early */
- count--;
-
- writel(USR2_IDLE, sport->port.membase + USR2);
- }
-
dev_dbg(sport->port.dev, "We get %d bytes.\n", count);
if (count) {
- if (!(sport->port.ignore_status_mask & URXD_DUMMY_READ))
- tty_insert_flip_string(port, sport->rx_buf, count);
+ if (!(sport->port.ignore_status_mask & URXD_DUMMY_READ)) {
+ int bytes = tty_insert_flip_string(port, sport->rx_buf,
+ count);
+
+ if (bytes != count)
+ sport->port.icount.buf_overrun++;
+ }
tty_flip_buffer_push(port);
+ sport->port.icount.rx += count;
+ }
+ /*
+ * Restart RX DMA directly if more data is available in order to skip
+ * the roundtrip through the IRQ handler. If there is some data already
+ * in the FIFO, DMA needs to be restarted soon anyways.
+ *
+ * Otherwise stop the DMA and reactivate FIFO IRQs to restart DMA once
+ * data starts to arrive again.
+ */
+ if (readl(sport->port.membase + USR2) & USR2_RDR)
start_rx_dma(sport);
- } else if (readl(sport->port.membase + USR2) & USR2_RDR) {
- /*
- * start rx_dma directly once data in RXFIFO, more efficient
- * than before:
- * 1. call imx_rx_dma_done to stop dma if no data received
- * 2. wait next RDR interrupt to start dma transfer.
- */
- start_rx_dma(sport);
- } else {
- /*
- * stop dma to prevent too many IDLE event trigged if no data
- * in RXFIFO
- */
+ else
imx_rx_dma_done(sport);
- }
}
static int start_rx_dma(struct imx_port *sport)
@@ -974,6 +965,22 @@ static int start_rx_dma(struct imx_port *sport)
return 0;
}
+#define TXTL_DEFAULT 2 /* reset default */
+#define RXTL_DEFAULT 1 /* reset default */
+#define TXTL_DMA 8 /* DMA burst setting */
+#define RXTL_DMA 9 /* DMA burst setting */
+
+static void imx_setup_ufcr(struct imx_port *sport,
+ unsigned char txwl, unsigned char rxwl)
+{
+ unsigned int val;
+
+ /* set receiver / transmitter trigger level */
+ val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE);
+ val |= txwl << UFCR_TXTL_SHF | rxwl;
+ writel(val, sport->port.membase + UFCR);
+}
+
static void imx_uart_dma_exit(struct imx_port *sport)
{
if (sport->dma_chan_rx) {
@@ -1009,7 +1016,8 @@ static int imx_uart_dma_init(struct imx_port *sport)
slave_config.direction = DMA_DEV_TO_MEM;
slave_config.src_addr = sport->port.mapbase + URXD0;
slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
- slave_config.src_maxburst = RXTL;
+ /* one byte less than the watermark level to enable the aging timer */
+ slave_config.src_maxburst = RXTL_DMA - 1;
ret = dmaengine_slave_config(sport->dma_chan_rx, &slave_config);
if (ret) {
dev_err(dev, "error in RX dma configuration.\n");
@@ -1033,7 +1041,7 @@ static int imx_uart_dma_init(struct imx_port *sport)
slave_config.direction = DMA_MEM_TO_DEV;
slave_config.dst_addr = sport->port.mapbase + URTX0;
slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
- slave_config.dst_maxburst = TXTL;
+ slave_config.dst_maxburst = TXTL_DMA;
ret = dmaengine_slave_config(sport->dma_chan_tx, &slave_config);
if (ret) {
dev_err(dev, "error in TX dma configuration.");
@@ -1056,15 +1064,14 @@ static void imx_enable_dma(struct imx_port *sport)
/* set UCR1 */
temp = readl(sport->port.membase + UCR1);
- temp |= UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN |
- /* wait for 32 idle frames for IDDMA interrupt */
- UCR1_ICD_REG(3);
+ temp |= UCR1_RDMAEN | UCR1_TDMAEN | UCR1_ATDMAEN;
writel(temp, sport->port.membase + UCR1);
- /* set UCR4 */
- temp = readl(sport->port.membase + UCR4);
- temp |= UCR4_IDDMAEN;
- writel(temp, sport->port.membase + UCR4);
+ temp = readl(sport->port.membase + UCR2);
+ temp |= UCR2_ATEN;
+ writel(temp, sport->port.membase + UCR2);
+
+ imx_setup_ufcr(sport, TXTL_DMA, RXTL_DMA);
sport->dma_is_enabled = 1;
}
@@ -1080,13 +1087,10 @@ static void imx_disable_dma(struct imx_port *sport)
/* clear UCR2 */
temp = readl(sport->port.membase + UCR2);
- temp &= ~(UCR2_CTSC | UCR2_CTS);
+ temp &= ~(UCR2_CTSC | UCR2_CTS | UCR2_ATEN);
writel(temp, sport->port.membase + UCR2);
- /* clear UCR4 */
- temp = readl(sport->port.membase + UCR4);
- temp &= ~UCR4_IDDMAEN;
- writel(temp, sport->port.membase + UCR4);
+ imx_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
sport->dma_is_enabled = 0;
}
@@ -1109,7 +1113,7 @@ static int imx_startup(struct uart_port *port)
return retval;
}
- imx_setup_ufcr(sport, 0);
+ imx_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
/* disable the DREN bit (Data Ready interrupt enable) before
* requesting IRQs
@@ -1122,6 +1126,12 @@ static int imx_startup(struct uart_port *port)
writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
+ /* Can we enable the DMA support? */
+ if (is_imx6q_uart(sport) && !uart_console(port) &&
+ !sport->dma_is_inited)
+ imx_uart_dma_init(sport);
+
+ spin_lock_irqsave(&sport->port.lock, flags);
/* Reset fifo's and state machines */
i = 100;
@@ -1132,14 +1142,15 @@ static int imx_startup(struct uart_port *port)
while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0))
udelay(1);
- spin_lock_irqsave(&sport->port.lock, flags);
-
/*
* Finally, clear and enable interrupts
*/
writel(USR1_RTSD, sport->port.membase + USR1);
writel(USR2_ORE, sport->port.membase + USR2);
+ if (sport->dma_is_inited && !sport->dma_is_enabled)
+ imx_enable_dma(sport);
+
temp = readl(sport->port.membase + UCR1);
temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
@@ -1273,7 +1284,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
{
struct imx_port *sport = (struct imx_port *)port;
unsigned long flags;
- unsigned int ucr2, old_ucr1, old_txrxen, baud, quot;
+ unsigned int ucr2, old_ucr1, old_ucr2, baud, quot;
unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
unsigned int div, ufcr;
unsigned long num, denom;
@@ -1310,11 +1321,6 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
} else {
ucr2 |= UCR2_CTSC;
}
-
- /* Can we enable the DMA support? */
- if (is_imx6q_uart(sport) && !uart_console(port)
- && !sport->dma_is_inited)
- imx_uart_dma_init(sport);
} else {
termios->c_cflag &= ~CRTSCTS;
}
@@ -1382,10 +1388,10 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
barrier();
/* then, disable everything */
- old_txrxen = readl(sport->port.membase + UCR2);
- writel(old_txrxen & ~(UCR2_TXEN | UCR2_RXEN),
+ old_ucr2 = readl(sport->port.membase + UCR2);
+ writel(old_ucr2 & ~(UCR2_TXEN | UCR2_RXEN),
sport->port.membase + UCR2);
- old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
+ old_ucr2 &= (UCR2_TXEN | UCR2_RXEN | UCR2_ATEN);
/* custom-baudrate handling */
div = sport->port.uartclk / (baud * 16);
@@ -1426,13 +1432,11 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
writel(old_ucr1, sport->port.membase + UCR1);
/* set the parity, stop bits and data size */
- writel(ucr2 | old_txrxen, sport->port.membase + UCR2);
+ writel(ucr2 | old_ucr2, sport->port.membase + UCR2);
if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
imx_enable_ms(&sport->port);
- if (sport->dma_is_inited && !sport->dma_is_enabled)
- imx_enable_dma(sport);
spin_unlock_irqrestore(&sport->port.lock, flags);
}
@@ -1498,7 +1502,7 @@ static int imx_poll_init(struct uart_port *port)
if (retval)
clk_disable_unprepare(sport->clk_ipg);
- imx_setup_ufcr(sport, 0);
+ imx_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
spin_lock_irqsave(&sport->port.lock, flags);
@@ -1768,7 +1772,7 @@ imx_console_setup(struct console *co, char *options)
else
imx_console_get_options(sport, &baud, &parity, &bits);
- imx_setup_ufcr(sport, 0);
+ imx_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
retval = uart_set_options(&sport->port, co, baud, parity, bits, flow);
@@ -1798,6 +1802,38 @@ static struct console imx_console = {
};
#define IMX_CONSOLE &imx_console
+
+#ifdef CONFIG_OF
+static void imx_console_early_putchar(struct uart_port *port, int ch)
+{
+ while (readl_relaxed(port->membase + IMX21_UTS) & UTS_TXFULL)
+ cpu_relax();
+
+ writel_relaxed(ch, port->membase + URTX0);
+}
+
+static void imx_console_early_write(struct console *con, const char *s,
+ unsigned count)
+{
+ struct earlycon_device *dev = con->data;
+
+ uart_console_write(&dev->port, s, count, imx_console_early_putchar);
+}
+
+static int __init
+imx_console_early_setup(struct earlycon_device *dev, const char *opt)
+{
+ if (!dev->port.membase)
+ return -ENODEV;
+
+ dev->con->write = imx_console_early_write;
+
+ return 0;
+}
+OF_EARLYCON_DECLARE(ec_imx6q, "fsl,imx6q-uart", imx_console_early_setup);
+OF_EARLYCON_DECLARE(ec_imx21, "fsl,imx21-uart", imx_console_early_setup);
+#endif
+
#else
#define IMX_CONSOLE NULL
#endif
@@ -1812,36 +1848,6 @@ static struct uart_driver imx_reg = {
.cons = IMX_CONSOLE,
};
-static int serial_imx_suspend(struct platform_device *dev, pm_message_t state)
-{
- struct imx_port *sport = platform_get_drvdata(dev);
- unsigned int val;
-
- /* enable wakeup from i.MX UART */
- val = readl(sport->port.membase + UCR3);
- val |= UCR3_AWAKEN;
- writel(val, sport->port.membase + UCR3);
-
- uart_suspend_port(&imx_reg, &sport->port);
-
- return 0;
-}
-
-static int serial_imx_resume(struct platform_device *dev)
-{
- struct imx_port *sport = platform_get_drvdata(dev);
- unsigned int val;
-
- /* disable wakeup from i.MX UART */
- val = readl(sport->port.membase + UCR3);
- val &= ~UCR3_AWAKEN;
- writel(val, sport->port.membase + UCR3);
-
- uart_resume_port(&imx_reg, &sport->port);
-
- return 0;
-}
-
#ifdef CONFIG_OF
/*
* This function returns 1 iff pdev isn't a device instatiated by dt, 0 iff it
@@ -1903,7 +1909,7 @@ static int serial_imx_probe(struct platform_device *pdev)
{
struct imx_port *sport;
void __iomem *base;
- int ret = 0;
+ int ret = 0, reg;
struct resource *res;
int txirq, rxirq, rtsirq;
@@ -1958,6 +1964,19 @@ static int serial_imx_probe(struct platform_device *pdev)
sport->port.uartclk = clk_get_rate(sport->clk_per);
+ /* For register access, we only need to enable the ipg clock. */
+ ret = clk_prepare_enable(sport->clk_ipg);
+ if (ret)
+ return ret;
+
+ /* Disable interrupts before requesting them */
+ reg = readl_relaxed(sport->port.membase + UCR1);
+ reg &= ~(UCR1_ADEN | UCR1_TRDYEN | UCR1_IDEN | UCR1_RRDYEN |
+ UCR1_TXMPTYEN | UCR1_RTSDEN);
+ writel_relaxed(reg, sport->port.membase + UCR1);
+
+ clk_disable_unprepare(sport->clk_ipg);
+
/*
* Allocate the IRQ(s) i.MX1 has three interrupts whereas later
* chips only have one interrupt.
@@ -1993,16 +2012,135 @@ static int serial_imx_remove(struct platform_device *pdev)
return uart_remove_one_port(&imx_reg, &sport->port);
}
+static void serial_imx_restore_context(struct imx_port *sport)
+{
+ if (!sport->context_saved)
+ return;
+
+ writel(sport->saved_reg[4], sport->port.membase + UFCR);
+ writel(sport->saved_reg[5], sport->port.membase + UESC);
+ writel(sport->saved_reg[6], sport->port.membase + UTIM);
+ writel(sport->saved_reg[7], sport->port.membase + UBIR);
+ writel(sport->saved_reg[8], sport->port.membase + UBMR);
+ writel(sport->saved_reg[9], sport->port.membase + IMX21_UTS);
+ writel(sport->saved_reg[0], sport->port.membase + UCR1);
+ writel(sport->saved_reg[1] | UCR2_SRST, sport->port.membase + UCR2);
+ writel(sport->saved_reg[2], sport->port.membase + UCR3);
+ writel(sport->saved_reg[3], sport->port.membase + UCR4);
+ sport->context_saved = false;
+}
+
+static void serial_imx_save_context(struct imx_port *sport)
+{
+ /* Save necessary regs */
+ sport->saved_reg[0] = readl(sport->port.membase + UCR1);
+ sport->saved_reg[1] = readl(sport->port.membase + UCR2);
+ sport->saved_reg[2] = readl(sport->port.membase + UCR3);
+ sport->saved_reg[3] = readl(sport->port.membase + UCR4);
+ sport->saved_reg[4] = readl(sport->port.membase + UFCR);
+ sport->saved_reg[5] = readl(sport->port.membase + UESC);
+ sport->saved_reg[6] = readl(sport->port.membase + UTIM);
+ sport->saved_reg[7] = readl(sport->port.membase + UBIR);
+ sport->saved_reg[8] = readl(sport->port.membase + UBMR);
+ sport->saved_reg[9] = readl(sport->port.membase + IMX21_UTS);
+ sport->context_saved = true;
+}
+
+static void serial_imx_enable_wakeup(struct imx_port *sport, bool on)
+{
+ unsigned int val;
+
+ val = readl(sport->port.membase + UCR3);
+ if (on)
+ val |= UCR3_AWAKEN;
+ else
+ val &= ~UCR3_AWAKEN;
+ writel(val, sport->port.membase + UCR3);
+
+ val = readl(sport->port.membase + UCR1);
+ if (on)
+ val |= UCR1_RTSDEN;
+ else
+ val &= ~UCR1_RTSDEN;
+ writel(val, sport->port.membase + UCR1);
+}
+
+static int imx_serial_port_suspend_noirq(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct imx_port *sport = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = clk_enable(sport->clk_ipg);
+ if (ret)
+ return ret;
+
+ serial_imx_save_context(sport);
+
+ clk_disable(sport->clk_ipg);
+
+ return 0;
+}
+
+static int imx_serial_port_resume_noirq(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct imx_port *sport = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = clk_enable(sport->clk_ipg);
+ if (ret)
+ return ret;
+
+ serial_imx_restore_context(sport);
+
+ clk_disable(sport->clk_ipg);
+
+ return 0;
+}
+
+static int imx_serial_port_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct imx_port *sport = platform_get_drvdata(pdev);
+
+ /* enable wakeup from i.MX UART */
+ serial_imx_enable_wakeup(sport, true);
+
+ uart_suspend_port(&imx_reg, &sport->port);
+
+ return 0;
+}
+
+static int imx_serial_port_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct imx_port *sport = platform_get_drvdata(pdev);
+
+ /* disable wakeup from i.MX UART */
+ serial_imx_enable_wakeup(sport, false);
+
+ uart_resume_port(&imx_reg, &sport->port);
+
+ return 0;
+}
+
+static const struct dev_pm_ops imx_serial_port_pm_ops = {
+ .suspend_noirq = imx_serial_port_suspend_noirq,
+ .resume_noirq = imx_serial_port_resume_noirq,
+ .suspend = imx_serial_port_suspend,
+ .resume = imx_serial_port_resume,
+};
+
static struct platform_driver serial_imx_driver = {
.probe = serial_imx_probe,
.remove = serial_imx_remove,
- .suspend = serial_imx_suspend,
- .resume = serial_imx_resume,
.id_table = imx_uart_devtype,
.driver = {
.name = "imx-uart",
.of_match_table = imx_uart_dt_ids,
+ .pm = &imx_serial_port_pm_ops,
},
};
diff --git a/kernel/drivers/tty/serial/ioc3_serial.c b/kernel/drivers/tty/serial/ioc3_serial.c
index abd7ea26e..27b5fefac 100644
--- a/kernel/drivers/tty/serial/ioc3_serial.c
+++ b/kernel/drivers/tty/serial/ioc3_serial.c
@@ -2137,7 +2137,8 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd)
/* register port with the serial core */
- if ((ret = ioc3_serial_core_attach(is, idd)))
+ ret = ioc3_serial_core_attach(is, idd);
+ if (ret)
goto out4;
Num_of_ioc3_cards++;
diff --git a/kernel/drivers/tty/serial/ioc4_serial.c b/kernel/drivers/tty/serial/ioc4_serial.c
index aa28209f4..e5c42fef6 100644
--- a/kernel/drivers/tty/serial/ioc4_serial.c
+++ b/kernel/drivers/tty/serial/ioc4_serial.c
@@ -1011,7 +1011,8 @@ static irqreturn_t ioc4_intr(int irq, void *arg)
*/
for (xx = 0; xx < num_intrs; xx++) {
intr_info = &soft->is_intr_type[intr_type].is_intr_info[xx];
- if ((this_mir = this_ir & intr_info->sd_bits)) {
+ this_mir = this_ir & intr_info->sd_bits;
+ if (this_mir) {
/* Disable owned interrupts, call handler */
handled++;
write_ireg(soft, intr_info->sd_bits, IOC4_W_IEC,
@@ -2865,10 +2866,12 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd)
/* register port with the serial core - 1 rs232, 1 rs422 */
- if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS232)))
+ ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS232);
+ if (ret)
goto out4;
- if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS422)))
+ ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS422);
+ if (ret)
goto out5;
Num_of_ioc4_cards++;
diff --git a/kernel/drivers/tty/serial/kgdb_nmi.c b/kernel/drivers/tty/serial/kgdb_nmi.c
index 129dc5be6..117df1516 100644
--- a/kernel/drivers/tty/serial/kgdb_nmi.c
+++ b/kernel/drivers/tty/serial/kgdb_nmi.c
@@ -173,18 +173,18 @@ static int kgdb_nmi_poll_one_knock(void)
bool kgdb_nmi_poll_knock(void)
{
if (kgdb_nmi_knock < 0)
- return 1;
+ return true;
while (1) {
int ret;
ret = kgdb_nmi_poll_one_knock();
if (ret == NO_POLL_CHAR)
- return 0;
+ return false;
else if (ret == 1)
break;
}
- return 1;
+ return true;
}
/*
diff --git a/kernel/drivers/tty/serial/lantiq.c b/kernel/drivers/tty/serial/lantiq.c
index 4ccc03976..b88832e8e 100644
--- a/kernel/drivers/tty/serial/lantiq.c
+++ b/kernel/drivers/tty/serial/lantiq.c
@@ -21,7 +21,6 @@
*/
#include <linux/slab.h>
-#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/console.h>
@@ -740,7 +739,6 @@ static const struct of_device_id ltq_asc_match[] = {
{ .compatible = DRVNAME },
{},
};
-MODULE_DEVICE_TABLE(of, ltq_asc_match);
static struct platform_driver lqasc_driver = {
.driver = {
@@ -764,8 +762,4 @@ init_lqasc(void)
return ret;
}
-
-module_init(init_lqasc);
-
-MODULE_DESCRIPTION("Lantiq serial port driver");
-MODULE_LICENSE("GPL");
+device_initcall(init_lqasc);
diff --git a/kernel/drivers/tty/serial/lpc32xx_hs.c b/kernel/drivers/tty/serial/lpc32xx_hs.c
index e92d7ebe9..7eb04ae71 100644
--- a/kernel/drivers/tty/serial/lpc32xx_hs.c
+++ b/kernel/drivers/tty/serial/lpc32xx_hs.c
@@ -691,12 +691,13 @@ static int serial_hs_lpc32xx_probe(struct platform_device *pdev)
p->port.mapbase = res->start;
p->port.membase = NULL;
- p->port.irq = platform_get_irq(pdev, 0);
- if (p->port.irq < 0) {
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0) {
dev_err(&pdev->dev, "Error getting irq for HS UART port %d\n",
uarts_registered);
- return p->port.irq;
+ return ret;
}
+ p->port.irq = ret;
p->port.iotype = UPIO_MEM32;
p->port.uartclk = LPC32XX_MAIN_OSC_FREQ;
diff --git a/kernel/drivers/tty/serial/max3100.c b/kernel/drivers/tty/serial/max3100.c
index 077377259..5c4c280b3 100644
--- a/kernel/drivers/tty/serial/max3100.c
+++ b/kernel/drivers/tty/serial/max3100.c
@@ -904,7 +904,6 @@ static SIMPLE_DEV_PM_OPS(max3100_pm_ops, max3100_suspend, max3100_resume);
static struct spi_driver max3100_driver = {
.driver = {
.name = "max3100",
- .owner = THIS_MODULE,
.pm = MAX3100_PM_OPS,
},
.probe = max3100_probe,
diff --git a/kernel/drivers/tty/serial/max310x.c b/kernel/drivers/tty/serial/max310x.c
index 182549f55..d45133056 100644
--- a/kernel/drivers/tty/serial/max310x.c
+++ b/kernel/drivers/tty/serial/max310x.c
@@ -1338,7 +1338,6 @@ MODULE_DEVICE_TABLE(spi, max310x_id_table);
static struct spi_driver max310x_uart_driver = {
.driver = {
.name = MAX310X_NAME,
- .owner = THIS_MODULE,
.of_match_table = of_match_ptr(max310x_dt_ids),
.pm = &max310x_pm_ops,
},
diff --git a/kernel/drivers/tty/serial/mcf.c b/kernel/drivers/tty/serial/mcf.c
index a9b0ab38a..02eb32217 100644
--- a/kernel/drivers/tty/serial/mcf.c
+++ b/kernel/drivers/tty/serial/mcf.c
@@ -597,7 +597,7 @@ console_initcall(mcf_console_init);
#define MCF_CONSOLE NULL
/****************************************************************************/
-#endif /* CONFIG_MCF_CONSOLE */
+#endif /* CONFIG_SERIAL_MCF_CONSOLE */
/****************************************************************************/
/*
diff --git a/kernel/drivers/tty/serial/men_z135_uart.c b/kernel/drivers/tty/serial/men_z135_uart.c
index 5a41b8fbb..3141aa208 100644
--- a/kernel/drivers/tty/serial/men_z135_uart.c
+++ b/kernel/drivers/tty/serial/men_z135_uart.c
@@ -35,8 +35,6 @@
#define MEN_Z135_BAUD_REG 0x810
#define MEN_Z135_TIMEOUT 0x814
-#define MEN_Z135_MEM_SIZE 0x818
-
#define IRQ_ID(x) ((x) & 0x1f)
#define MEN_Z135_IER_RXCIEN BIT(0) /* RX Space IRQ */
@@ -124,6 +122,7 @@ MODULE_PARM_DESC(rx_timeout, "RX timeout. "
struct men_z135_port {
struct uart_port port;
struct mcb_device *mdev;
+ struct resource *mem;
unsigned char *rxbuf;
u32 stat_reg;
spinlock_t lock;
@@ -734,22 +733,30 @@ static const char *men_z135_type(struct uart_port *port)
static void men_z135_release_port(struct uart_port *port)
{
+ struct men_z135_port *uart = to_men_z135(port);
+
iounmap(port->membase);
port->membase = NULL;
- release_mem_region(port->mapbase, MEN_Z135_MEM_SIZE);
+ mcb_release_mem(uart->mem);
}
static int men_z135_request_port(struct uart_port *port)
{
- int size = MEN_Z135_MEM_SIZE;
+ struct men_z135_port *uart = to_men_z135(port);
+ struct mcb_device *mdev = uart->mdev;
+ struct resource *mem;
+
+ mem = mcb_request_mem(uart->mdev, dev_name(&mdev->dev));
+ if (IS_ERR(mem))
+ return PTR_ERR(mem);
- if (!request_mem_region(port->mapbase, size, "men_z135_port"))
- return -EBUSY;
+ port->mapbase = mem->start;
+ uart->mem = mem;
- port->membase = ioremap(port->mapbase, MEN_Z135_MEM_SIZE);
+ port->membase = ioremap(mem->start, resource_size(mem));
if (port->membase == NULL) {
- release_mem_region(port->mapbase, MEN_Z135_MEM_SIZE);
+ mcb_release_mem(mem);
return -ENOMEM;
}
@@ -839,7 +846,6 @@ static int men_z135_probe(struct mcb_device *mdev,
uart->port.membase = NULL;
uart->mdev = mdev;
- spin_lock_init(&uart->port.lock);
spin_lock_init(&uart->lock);
err = uart_add_one_port(&men_z135_driver, &uart->port);
diff --git a/kernel/drivers/tty/serial/meson_uart.c b/kernel/drivers/tty/serial/meson_uart.c
index 67c036702..0fc83c962 100644
--- a/kernel/drivers/tty/serial/meson_uart.c
+++ b/kernel/drivers/tty/serial/meson_uart.c
@@ -370,7 +370,7 @@ static int meson_uart_verify_port(struct uart_port *port,
static void meson_uart_release_port(struct uart_port *port)
{
if (port->flags & UPF_IOREMAP) {
- iounmap(port->membase);
+ devm_iounmap(port->dev, port->membase);
port->membase = NULL;
}
}
diff --git a/kernel/drivers/tty/serial/mpc52xx_uart.c b/kernel/drivers/tty/serial/mpc52xx_uart.c
index 1589f17c1..8c3e51314 100644
--- a/kernel/drivers/tty/serial/mpc52xx_uart.c
+++ b/kernel/drivers/tty/serial/mpc52xx_uart.c
@@ -239,8 +239,9 @@ static int mpc52xx_psc_tx_rdy(struct uart_port *port)
static int mpc52xx_psc_tx_empty(struct uart_port *port)
{
- return in_be16(&PSC(port)->mpc52xx_psc_status)
- & MPC52xx_PSC_SR_TXEMP;
+ u16 sts = in_be16(&PSC(port)->mpc52xx_psc_status);
+
+ return (sts & MPC52xx_PSC_SR_TXEMP) ? TIOCSER_TEMT : 0;
}
static void mpc52xx_psc_start_tx(struct uart_port *port)
@@ -405,7 +406,7 @@ static struct psc_ops mpc5200b_psc_ops = {
.get_mr1 = mpc52xx_psc_get_mr1,
};
-#endif /* CONFIG_MPC52xx */
+#endif /* CONFIG_PPC_MPC52xx */
#ifdef CONFIG_PPC_MPC512x
#define FIFO_512x(port) ((struct mpc512x_psc_fifo __iomem *)(PSC(port)+1))
@@ -1134,6 +1135,13 @@ mpc52xx_uart_startup(struct uart_port *port)
psc_ops->command(port, MPC52xx_PSC_RST_RX);
psc_ops->command(port, MPC52xx_PSC_RST_TX);
+ /*
+ * According to Freescale's support the RST_TX command can produce a
+ * spike on the TX pin. So they recommend to delay "for one character".
+ * One millisecond should be enough for everyone.
+ */
+ msleep(1);
+
psc_ops->set_sicr(port, 0); /* UART mode DCD ignored */
psc_ops->fifo_init(port);
diff --git a/kernel/drivers/tty/serial/mpsc.c b/kernel/drivers/tty/serial/mpsc.c
index 856fd5a5f..cadfd1cfa 100644
--- a/kernel/drivers/tty/serial/mpsc.c
+++ b/kernel/drivers/tty/serial/mpsc.c
@@ -55,8 +55,6 @@
#define SUPPORT_SYSRQ
#endif
-#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/ioport.h>
@@ -755,7 +753,7 @@ static int mpsc_alloc_ring_mem(struct mpsc_port_info *pi)
pi->port.line);
if (!pi->dma_region) {
- if (!dma_supported(pi->port.dev, 0xffffffff)) {
+ if (!dma_set_mask(pi->port.dev, 0xffffffff)) {
printk(KERN_ERR "MPSC: Inadequate DMA support\n");
rc = -ENXIO;
} else if ((pi->dma_region = dma_alloc_noncoherent(pi->port.dev,
@@ -913,7 +911,8 @@ static int mpsc_make_ready(struct mpsc_port_info *pi)
if (!pi->ready) {
mpsc_init_hw(pi);
- if ((rc = mpsc_alloc_ring_mem(pi)))
+ rc = mpsc_alloc_ring_mem(pi);
+ if (rc)
return rc;
mpsc_init_rings(pi);
pi->ready = 1;
@@ -1895,7 +1894,8 @@ static int mpsc_shared_drv_probe(struct platform_device *dev)
int rc = -ENODEV;
if (dev->id == 0) {
- if (!(rc = mpsc_shared_map_regs(dev))) {
+ rc = mpsc_shared_map_regs(dev);
+ if (!rc) {
pdata = (struct mpsc_shared_pdata *)
dev_get_platdata(&dev->dev);
@@ -2081,14 +2081,16 @@ static int mpsc_drv_probe(struct platform_device *dev)
if (dev->id < MPSC_NUM_CTLRS) {
pi = &mpsc_ports[dev->id];
- if (!(rc = mpsc_drv_map_regs(pi, dev))) {
+ rc = mpsc_drv_map_regs(pi, dev);
+ if (!rc) {
mpsc_drv_get_platform_data(pi, dev, dev->id);
pi->port.dev = &dev->dev;
- if (!(rc = mpsc_make_ready(pi))) {
+ rc = mpsc_make_ready(pi);
+ if (!rc) {
spin_lock_init(&pi->tx_lock);
- if (!(rc = uart_add_one_port(&mpsc_reg,
- &pi->port))) {
+ rc = uart_add_one_port(&mpsc_reg, &pi->port);
+ if (!rc) {
rc = 0;
} else {
mpsc_release_port((struct uart_port *)
@@ -2104,26 +2106,11 @@ static int mpsc_drv_probe(struct platform_device *dev)
return rc;
}
-static int mpsc_drv_remove(struct platform_device *dev)
-{
- pr_debug("mpsc_drv_exit: Removing MPSC %d\n", dev->id);
-
- if (dev->id < MPSC_NUM_CTLRS) {
- uart_remove_one_port(&mpsc_reg, &mpsc_ports[dev->id].port);
- mpsc_release_port((struct uart_port *)
- &mpsc_ports[dev->id].port);
- mpsc_drv_unmap_regs(&mpsc_ports[dev->id]);
- return 0;
- } else {
- return -ENODEV;
- }
-}
-
static struct platform_driver mpsc_driver = {
.probe = mpsc_drv_probe,
- .remove = mpsc_drv_remove,
.driver = {
- .name = MPSC_CTLR_NAME,
+ .name = MPSC_CTLR_NAME,
+ .suppress_bind_attrs = true,
},
};
@@ -2136,9 +2123,12 @@ static int __init mpsc_drv_init(void)
memset(mpsc_ports, 0, sizeof(mpsc_ports));
memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
- if (!(rc = uart_register_driver(&mpsc_reg))) {
- if (!(rc = platform_driver_register(&mpsc_shared_driver))) {
- if ((rc = platform_driver_register(&mpsc_driver))) {
+ rc = uart_register_driver(&mpsc_reg);
+ if (!rc) {
+ rc = platform_driver_register(&mpsc_shared_driver);
+ if (!rc) {
+ rc = platform_driver_register(&mpsc_driver);
+ if (rc) {
platform_driver_unregister(&mpsc_shared_driver);
uart_unregister_driver(&mpsc_reg);
}
@@ -2149,22 +2139,10 @@ static int __init mpsc_drv_init(void)
return rc;
}
+device_initcall(mpsc_drv_init);
-static void __exit mpsc_drv_exit(void)
-{
- platform_driver_unregister(&mpsc_driver);
- platform_driver_unregister(&mpsc_shared_driver);
- uart_unregister_driver(&mpsc_reg);
- memset(mpsc_ports, 0, sizeof(mpsc_ports));
- memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs));
-}
-
-module_init(mpsc_drv_init);
-module_exit(mpsc_drv_exit);
-
+/*
MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>");
MODULE_DESCRIPTION("Generic Marvell MPSC serial/UART driver");
-MODULE_VERSION(MPSC_VERSION);
MODULE_LICENSE("GPL");
-MODULE_ALIAS_CHARDEV_MAJOR(MPSC_MAJOR);
-MODULE_ALIAS("platform:" MPSC_CTLR_NAME);
+*/
diff --git a/kernel/drivers/tty/serial/msm_serial.c b/kernel/drivers/tty/serial/msm_serial.c
index b73889c8e..dcde95547 100644
--- a/kernel/drivers/tty/serial/msm_serial.c
+++ b/kernel/drivers/tty/serial/msm_serial.c
@@ -20,6 +20,8 @@
#endif
#include <linux/atomic.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
#include <linux/hrtimer.h>
#include <linux/module.h>
#include <linux/io.h>
@@ -31,6 +33,7 @@
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
+#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
@@ -39,6 +42,11 @@
#include "msm_serial.h"
+#define UARTDM_BURST_SIZE 16 /* in bytes */
+#define UARTDM_TX_AIGN(x) ((x) & ~0x3) /* valid for > 1p3 */
+#define UARTDM_TX_MAX 256 /* in bytes, valid for <= 1p3 */
+#define UARTDM_RX_SIZE (UART_XMIT_SIZE / 4)
+
enum {
UARTDM_1P1 = 1,
UARTDM_1P2,
@@ -46,6 +54,17 @@ enum {
UARTDM_1P4,
};
+struct msm_dma {
+ struct dma_chan *chan;
+ enum dma_data_direction dir;
+ dma_addr_t phys;
+ unsigned char *virt;
+ dma_cookie_t cookie;
+ u32 enable_bit;
+ unsigned int count;
+ struct dma_async_tx_descriptor *desc;
+};
+
struct msm_port {
struct uart_port uart;
char name[16];
@@ -55,9 +74,153 @@ struct msm_port {
int is_uartdm;
unsigned int old_snap_state;
bool break_detected;
+ struct msm_dma tx_dma;
+ struct msm_dma rx_dma;
};
-static inline void wait_for_xmitr(struct uart_port *port)
+static void msm_handle_tx(struct uart_port *port);
+static void msm_start_rx_dma(struct msm_port *msm_port);
+
+void msm_stop_dma(struct uart_port *port, struct msm_dma *dma)
+{
+ struct device *dev = port->dev;
+ unsigned int mapped;
+ u32 val;
+
+ mapped = dma->count;
+ dma->count = 0;
+
+ dmaengine_terminate_all(dma->chan);
+
+ /*
+ * DMA Stall happens if enqueue and flush command happens concurrently.
+ * For example before changing the baud rate/protocol configuration and
+ * sending flush command to ADM, disable the channel of UARTDM.
+ * Note: should not reset the receiver here immediately as it is not
+ * suggested to do disable/reset or reset/disable at the same time.
+ */
+ val = msm_read(port, UARTDM_DMEN);
+ val &= ~dma->enable_bit;
+ msm_write(port, val, UARTDM_DMEN);
+
+ if (mapped)
+ dma_unmap_single(dev, dma->phys, mapped, dma->dir);
+}
+
+static void msm_release_dma(struct msm_port *msm_port)
+{
+ struct msm_dma *dma;
+
+ dma = &msm_port->tx_dma;
+ if (dma->chan) {
+ msm_stop_dma(&msm_port->uart, dma);
+ dma_release_channel(dma->chan);
+ }
+
+ memset(dma, 0, sizeof(*dma));
+
+ dma = &msm_port->rx_dma;
+ if (dma->chan) {
+ msm_stop_dma(&msm_port->uart, dma);
+ dma_release_channel(dma->chan);
+ kfree(dma->virt);
+ }
+
+ memset(dma, 0, sizeof(*dma));
+}
+
+static void msm_request_tx_dma(struct msm_port *msm_port, resource_size_t base)
+{
+ struct device *dev = msm_port->uart.dev;
+ struct dma_slave_config conf;
+ struct msm_dma *dma;
+ u32 crci = 0;
+ int ret;
+
+ dma = &msm_port->tx_dma;
+
+ /* allocate DMA resources, if available */
+ dma->chan = dma_request_slave_channel_reason(dev, "tx");
+ if (IS_ERR(dma->chan))
+ goto no_tx;
+
+ of_property_read_u32(dev->of_node, "qcom,tx-crci", &crci);
+
+ memset(&conf, 0, sizeof(conf));
+ conf.direction = DMA_MEM_TO_DEV;
+ conf.device_fc = true;
+ conf.dst_addr = base + UARTDM_TF;
+ conf.dst_maxburst = UARTDM_BURST_SIZE;
+ conf.slave_id = crci;
+
+ ret = dmaengine_slave_config(dma->chan, &conf);
+ if (ret)
+ goto rel_tx;
+
+ dma->dir = DMA_TO_DEVICE;
+
+ if (msm_port->is_uartdm < UARTDM_1P4)
+ dma->enable_bit = UARTDM_DMEN_TX_DM_ENABLE;
+ else
+ dma->enable_bit = UARTDM_DMEN_TX_BAM_ENABLE;
+
+ return;
+
+rel_tx:
+ dma_release_channel(dma->chan);
+no_tx:
+ memset(dma, 0, sizeof(*dma));
+}
+
+static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base)
+{
+ struct device *dev = msm_port->uart.dev;
+ struct dma_slave_config conf;
+ struct msm_dma *dma;
+ u32 crci = 0;
+ int ret;
+
+ dma = &msm_port->rx_dma;
+
+ /* allocate DMA resources, if available */
+ dma->chan = dma_request_slave_channel_reason(dev, "rx");
+ if (IS_ERR(dma->chan))
+ goto no_rx;
+
+ of_property_read_u32(dev->of_node, "qcom,rx-crci", &crci);
+
+ dma->virt = kzalloc(UARTDM_RX_SIZE, GFP_KERNEL);
+ if (!dma->virt)
+ goto rel_rx;
+
+ memset(&conf, 0, sizeof(conf));
+ conf.direction = DMA_DEV_TO_MEM;
+ conf.device_fc = true;
+ conf.src_addr = base + UARTDM_RF;
+ conf.src_maxburst = UARTDM_BURST_SIZE;
+ conf.slave_id = crci;
+
+ ret = dmaengine_slave_config(dma->chan, &conf);
+ if (ret)
+ goto err;
+
+ dma->dir = DMA_FROM_DEVICE;
+
+ if (msm_port->is_uartdm < UARTDM_1P4)
+ dma->enable_bit = UARTDM_DMEN_RX_DM_ENABLE;
+ else
+ dma->enable_bit = UARTDM_DMEN_RX_BAM_ENABLE;
+
+ return;
+err:
+ kfree(dma->virt);
+rel_rx:
+ dma_release_channel(dma->chan);
+no_rx:
+ memset(dma, 0, sizeof(*dma));
+}
+
+static inline void msm_wait_for_xmitr(struct uart_port *port)
{
while (!(msm_read(port, UART_SR) & UART_SR_TX_EMPTY)) {
if (msm_read(port, UART_ISR) & UART_ISR_TX_READY)
@@ -78,17 +241,277 @@ static void msm_stop_tx(struct uart_port *port)
static void msm_start_tx(struct uart_port *port)
{
struct msm_port *msm_port = UART_TO_MSM(port);
+ struct msm_dma *dma = &msm_port->tx_dma;
+
+ /* Already started in DMA mode */
+ if (dma->count)
+ return;
+
+ msm_port->imr |= UART_IMR_TXLEV;
+ msm_write(port, msm_port->imr, UART_IMR);
+}
+
+static void msm_reset_dm_count(struct uart_port *port, int count)
+{
+ msm_wait_for_xmitr(port);
+ msm_write(port, count, UARTDM_NCF_TX);
+ msm_read(port, UARTDM_NCF_TX);
+}
+
+static void msm_complete_tx_dma(void *args)
+{
+ struct msm_port *msm_port = args;
+ struct uart_port *port = &msm_port->uart;
+ struct circ_buf *xmit = &port->state->xmit;
+ struct msm_dma *dma = &msm_port->tx_dma;
+ struct dma_tx_state state;
+ enum dma_status status;
+ unsigned long flags;
+ unsigned int count;
+ u32 val;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Already stopped */
+ if (!dma->count)
+ goto done;
+
+ status = dmaengine_tx_status(dma->chan, dma->cookie, &state);
+
+ dma_unmap_single(port->dev, dma->phys, dma->count, dma->dir);
+ val = msm_read(port, UARTDM_DMEN);
+ val &= ~dma->enable_bit;
+ msm_write(port, val, UARTDM_DMEN);
+
+ if (msm_port->is_uartdm > UARTDM_1P3) {
+ msm_write(port, UART_CR_CMD_RESET_TX, UART_CR);
+ msm_write(port, UART_CR_TX_ENABLE, UART_CR);
+ }
+
+ count = dma->count - state.residue;
+ port->icount.tx += count;
+ dma->count = 0;
+
+ xmit->tail += count;
+ xmit->tail &= UART_XMIT_SIZE - 1;
+
+ /* Restore "Tx FIFO below watermark" interrupt */
msm_port->imr |= UART_IMR_TXLEV;
msm_write(port, msm_port->imr, UART_IMR);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ msm_handle_tx(port);
+done:
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static int msm_handle_tx_dma(struct msm_port *msm_port, unsigned int count)
+{
+ struct circ_buf *xmit = &msm_port->uart.state->xmit;
+ struct uart_port *port = &msm_port->uart;
+ struct msm_dma *dma = &msm_port->tx_dma;
+ void *cpu_addr;
+ int ret;
+ u32 val;
+
+ cpu_addr = &xmit->buf[xmit->tail];
+
+ dma->phys = dma_map_single(port->dev, cpu_addr, count, dma->dir);
+ ret = dma_mapping_error(port->dev, dma->phys);
+ if (ret)
+ return ret;
+
+ dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys,
+ count, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT |
+ DMA_PREP_FENCE);
+ if (!dma->desc) {
+ ret = -EIO;
+ goto unmap;
+ }
+
+ dma->desc->callback = msm_complete_tx_dma;
+ dma->desc->callback_param = msm_port;
+
+ dma->cookie = dmaengine_submit(dma->desc);
+ ret = dma_submit_error(dma->cookie);
+ if (ret)
+ goto unmap;
+
+ /*
+ * Using DMA complete for Tx FIFO reload, no need for
+ * "Tx FIFO below watermark" one, disable it
+ */
+ msm_port->imr &= ~UART_IMR_TXLEV;
+ msm_write(port, msm_port->imr, UART_IMR);
+
+ dma->count = count;
+
+ val = msm_read(port, UARTDM_DMEN);
+ val |= dma->enable_bit;
+
+ if (msm_port->is_uartdm < UARTDM_1P4)
+ msm_write(port, val, UARTDM_DMEN);
+
+ msm_reset_dm_count(port, count);
+
+ if (msm_port->is_uartdm > UARTDM_1P3)
+ msm_write(port, val, UARTDM_DMEN);
+
+ dma_async_issue_pending(dma->chan);
+ return 0;
+unmap:
+ dma_unmap_single(port->dev, dma->phys, count, dma->dir);
+ return ret;
+}
+
+static void msm_complete_rx_dma(void *args)
+{
+ struct msm_port *msm_port = args;
+ struct uart_port *port = &msm_port->uart;
+ struct tty_port *tport = &port->state->port;
+ struct msm_dma *dma = &msm_port->rx_dma;
+ int count = 0, i, sysrq;
+ unsigned long flags;
+ u32 val;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Already stopped */
+ if (!dma->count)
+ goto done;
+
+ val = msm_read(port, UARTDM_DMEN);
+ val &= ~dma->enable_bit;
+ msm_write(port, val, UARTDM_DMEN);
+
+ /* Restore interrupts */
+ msm_port->imr |= UART_IMR_RXLEV | UART_IMR_RXSTALE;
+ msm_write(port, msm_port->imr, UART_IMR);
+
+ if (msm_read(port, UART_SR) & UART_SR_OVERRUN) {
+ port->icount.overrun++;
+ tty_insert_flip_char(tport, 0, TTY_OVERRUN);
+ msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR);
+ }
+
+ count = msm_read(port, UARTDM_RX_TOTAL_SNAP);
+
+ port->icount.rx += count;
+
+ dma->count = 0;
+
+ dma_unmap_single(port->dev, dma->phys, UARTDM_RX_SIZE, dma->dir);
+
+ for (i = 0; i < count; i++) {
+ char flag = TTY_NORMAL;
+
+ if (msm_port->break_detected && dma->virt[i] == 0) {
+ port->icount.brk++;
+ flag = TTY_BREAK;
+ msm_port->break_detected = false;
+ if (uart_handle_break(port))
+ continue;
+ }
+
+ if (!(port->read_status_mask & UART_SR_RX_BREAK))
+ flag = TTY_NORMAL;
+
+ spin_unlock_irqrestore(&port->lock, flags);
+ sysrq = uart_handle_sysrq_char(port, dma->virt[i]);
+ spin_lock_irqsave(&port->lock, flags);
+ if (!sysrq)
+ tty_insert_flip_char(tport, dma->virt[i], flag);
+ }
+
+ msm_start_rx_dma(msm_port);
+done:
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ if (count)
+ tty_flip_buffer_push(tport);
+}
+
+static void msm_start_rx_dma(struct msm_port *msm_port)
+{
+ struct msm_dma *dma = &msm_port->rx_dma;
+ struct uart_port *uart = &msm_port->uart;
+ u32 val;
+ int ret;
+
+ if (!dma->chan)
+ return;
+
+ dma->phys = dma_map_single(uart->dev, dma->virt,
+ UARTDM_RX_SIZE, dma->dir);
+ ret = dma_mapping_error(uart->dev, dma->phys);
+ if (ret)
+ return;
+
+ dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys,
+ UARTDM_RX_SIZE, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT);
+ if (!dma->desc)
+ goto unmap;
+
+ dma->desc->callback = msm_complete_rx_dma;
+ dma->desc->callback_param = msm_port;
+
+ dma->cookie = dmaengine_submit(dma->desc);
+ ret = dma_submit_error(dma->cookie);
+ if (ret)
+ goto unmap;
+ /*
+ * Using DMA for FIFO off-load, no need for "Rx FIFO over
+ * watermark" or "stale" interrupts, disable them
+ */
+ msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE);
+
+ /*
+ * Well, when DMA is ADM3 engine(implied by <= UARTDM v1.3),
+ * we need RXSTALE to flush input DMA fifo to memory
+ */
+ if (msm_port->is_uartdm < UARTDM_1P4)
+ msm_port->imr |= UART_IMR_RXSTALE;
+
+ msm_write(uart, msm_port->imr, UART_IMR);
+
+ dma->count = UARTDM_RX_SIZE;
+
+ dma_async_issue_pending(dma->chan);
+
+ msm_write(uart, UART_CR_CMD_RESET_STALE_INT, UART_CR);
+ msm_write(uart, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
+
+ val = msm_read(uart, UARTDM_DMEN);
+ val |= dma->enable_bit;
+
+ if (msm_port->is_uartdm < UARTDM_1P4)
+ msm_write(uart, val, UARTDM_DMEN);
+
+ msm_write(uart, UARTDM_RX_SIZE, UARTDM_DMRX);
+
+ if (msm_port->is_uartdm > UARTDM_1P3)
+ msm_write(uart, val, UARTDM_DMEN);
+
+ return;
+unmap:
+ dma_unmap_single(uart->dev, dma->phys, UARTDM_RX_SIZE, dma->dir);
}
static void msm_stop_rx(struct uart_port *port)
{
struct msm_port *msm_port = UART_TO_MSM(port);
+ struct msm_dma *dma = &msm_port->rx_dma;
msm_port->imr &= ~(UART_IMR_RXLEV | UART_IMR_RXSTALE);
msm_write(port, msm_port->imr, UART_IMR);
+
+ if (dma->chan)
+ msm_stop_dma(port, dma);
}
static void msm_enable_ms(struct uart_port *port)
@@ -99,7 +522,7 @@ static void msm_enable_ms(struct uart_port *port)
msm_write(port, msm_port->imr, UART_IMR);
}
-static void handle_rx_dm(struct uart_port *port, unsigned int misr)
+static void msm_handle_rx_dm(struct uart_port *port, unsigned int misr)
{
struct tty_port *tport = &port->state->port;
unsigned int sr;
@@ -169,9 +592,12 @@ static void handle_rx_dm(struct uart_port *port, unsigned int misr)
msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR);
msm_write(port, 0xFFFFFF, UARTDM_DMRX);
msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
+
+ /* Try to use DMA */
+ msm_start_rx_dma(msm_port);
}
-static void handle_rx(struct uart_port *port)
+static void msm_handle_rx(struct uart_port *port)
{
struct tty_port *tport = &port->state->port;
unsigned int sr;
@@ -224,18 +650,11 @@ static void handle_rx(struct uart_port *port)
spin_lock(&port->lock);
}
-static void reset_dm_count(struct uart_port *port, int count)
-{
- wait_for_xmitr(port);
- msm_write(port, count, UARTDM_NCF_TX);
- msm_read(port, UARTDM_NCF_TX);
-}
-
-static void handle_tx(struct uart_port *port)
+static void msm_handle_tx_pio(struct uart_port *port, unsigned int tx_count)
{
struct circ_buf *xmit = &port->state->xmit;
struct msm_port *msm_port = UART_TO_MSM(port);
- unsigned int tx_count, num_chars;
+ unsigned int num_chars;
unsigned int tf_pointer = 0;
void __iomem *tf;
@@ -244,20 +663,8 @@ static void handle_tx(struct uart_port *port)
else
tf = port->membase + UART_TF;
- tx_count = uart_circ_chars_pending(xmit);
- tx_count = min3(tx_count, (unsigned int)UART_XMIT_SIZE - xmit->tail,
- port->fifosize);
-
- if (port->x_char) {
- if (msm_port->is_uartdm)
- reset_dm_count(port, tx_count + 1);
-
- iowrite8_rep(tf, &port->x_char, 1);
- port->icount.tx++;
- port->x_char = 0;
- } else if (tx_count && msm_port->is_uartdm) {
- reset_dm_count(port, tx_count);
- }
+ if (tx_count && msm_port->is_uartdm)
+ msm_reset_dm_count(port, tx_count);
while (tf_pointer < tx_count) {
int i;
@@ -290,20 +697,76 @@ static void handle_tx(struct uart_port *port)
uart_write_wakeup(port);
}
-static void handle_delta_cts(struct uart_port *port)
+static void msm_handle_tx(struct uart_port *port)
+{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+ struct circ_buf *xmit = &msm_port->uart.state->xmit;
+ struct msm_dma *dma = &msm_port->tx_dma;
+ unsigned int pio_count, dma_count, dma_min;
+ void __iomem *tf;
+ int err = 0;
+
+ if (port->x_char) {
+ if (msm_port->is_uartdm)
+ tf = port->membase + UARTDM_TF;
+ else
+ tf = port->membase + UART_TF;
+
+ if (msm_port->is_uartdm)
+ msm_reset_dm_count(port, 1);
+
+ iowrite8_rep(tf, &port->x_char, 1);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ msm_stop_tx(port);
+ return;
+ }
+
+ pio_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE);
+ dma_count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+
+ dma_min = 1; /* Always DMA */
+ if (msm_port->is_uartdm > UARTDM_1P3) {
+ dma_count = UARTDM_TX_AIGN(dma_count);
+ dma_min = UARTDM_BURST_SIZE;
+ } else {
+ if (dma_count > UARTDM_TX_MAX)
+ dma_count = UARTDM_TX_MAX;
+ }
+
+ if (pio_count > port->fifosize)
+ pio_count = port->fifosize;
+
+ if (!dma->chan || dma_count < dma_min)
+ msm_handle_tx_pio(port, pio_count);
+ else
+ err = msm_handle_tx_dma(msm_port, dma_count);
+
+ if (err) /* fall back to PIO mode */
+ msm_handle_tx_pio(port, pio_count);
+}
+
+static void msm_handle_delta_cts(struct uart_port *port)
{
msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
port->icount.cts++;
wake_up_interruptible(&port->state->port.delta_msr_wait);
}
-static irqreturn_t msm_irq(int irq, void *dev_id)
+static irqreturn_t msm_uart_irq(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
struct msm_port *msm_port = UART_TO_MSM(port);
+ struct msm_dma *dma = &msm_port->rx_dma;
+ unsigned long flags;
unsigned int misr;
+ u32 val;
- spin_lock(&port->lock);
+ spin_lock_irqsave(&port->lock, flags);
misr = msm_read(port, UART_MISR);
msm_write(port, 0, UART_IMR); /* disable interrupt */
@@ -313,18 +776,29 @@ static irqreturn_t msm_irq(int irq, void *dev_id)
}
if (misr & (UART_IMR_RXLEV | UART_IMR_RXSTALE)) {
- if (msm_port->is_uartdm)
- handle_rx_dm(port, misr);
- else
- handle_rx(port);
+ if (dma->count) {
+ val = UART_CR_CMD_STALE_EVENT_DISABLE;
+ msm_write(port, val, UART_CR);
+ val = UART_CR_CMD_RESET_STALE_INT;
+ msm_write(port, val, UART_CR);
+ /*
+ * Flush DMA input fifo to memory, this will also
+ * trigger DMA RX completion
+ */
+ dmaengine_terminate_all(dma->chan);
+ } else if (msm_port->is_uartdm) {
+ msm_handle_rx_dm(port, misr);
+ } else {
+ msm_handle_rx(port);
+ }
}
if (misr & UART_IMR_TXLEV)
- handle_tx(port);
+ msm_handle_tx(port);
if (misr & UART_IMR_DELTA_CTS)
- handle_delta_cts(port);
+ msm_handle_delta_cts(port);
msm_write(port, msm_port->imr, UART_IMR); /* restore interrupt */
- spin_unlock(&port->lock);
+ spin_unlock_irqrestore(&port->lock, flags);
return IRQ_HANDLED;
}
@@ -408,6 +882,7 @@ msm_find_best_baud(struct uart_port *port, unsigned int baud)
{ 3, 0xdd, 8 },
{ 2, 0xee, 16 },
{ 1, 0xff, 31 },
+ { 0, 0xff, 31 },
};
divisor = uart_get_divisor(port, baud);
@@ -419,21 +894,41 @@ msm_find_best_baud(struct uart_port *port, unsigned int baud)
return entry; /* Default to smallest divider */
}
-static int msm_set_baud_rate(struct uart_port *port, unsigned int baud)
+static int msm_set_baud_rate(struct uart_port *port, unsigned int baud,
+ unsigned long *saved_flags)
{
- unsigned int rxstale, watermark;
+ unsigned int rxstale, watermark, mask;
struct msm_port *msm_port = UART_TO_MSM(port);
const struct msm_baud_map *entry;
+ unsigned long flags;
entry = msm_find_best_baud(port, baud);
msm_write(port, entry->code, UART_CSR);
+ if (baud > 460800)
+ port->uartclk = baud * 16;
+
+ flags = *saved_flags;
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ clk_set_rate(msm_port->clk, port->uartclk);
+
+ spin_lock_irqsave(&port->lock, flags);
+ *saved_flags = flags;
+
/* RX stale watermark */
rxstale = entry->rxstale;
watermark = UART_IPR_STALE_LSB & rxstale;
- watermark |= UART_IPR_RXSTALE_LAST;
- watermark |= UART_IPR_STALE_TIMEOUT_MSB & (rxstale << 2);
+ if (msm_port->is_uartdm) {
+ mask = UART_DM_IPR_STALE_TIMEOUT_MSB;
+ } else {
+ watermark |= UART_IPR_RXSTALE_LAST;
+ mask = UART_IPR_STALE_TIMEOUT_MSB;
+ }
+
+ watermark |= mask & (rxstale << 2);
+
msm_write(port, watermark, UART_IPR);
/* set RX watermark */
@@ -476,13 +971,13 @@ static void msm_init_clock(struct uart_port *port)
static int msm_startup(struct uart_port *port)
{
struct msm_port *msm_port = UART_TO_MSM(port);
- unsigned int data, rfr_level;
+ unsigned int data, rfr_level, mask;
int ret;
snprintf(msm_port->name, sizeof(msm_port->name),
"msm_serial%d", port->line);
- ret = request_irq(port->irq, msm_irq, IRQF_TRIGGER_HIGH,
+ ret = request_irq(port->irq, msm_uart_irq, IRQF_TRIGGER_HIGH,
msm_port->name, port);
if (unlikely(ret))
return ret;
@@ -496,11 +991,23 @@ static int msm_startup(struct uart_port *port)
/* set automatic RFR level */
data = msm_read(port, UART_MR1);
- data &= ~UART_MR1_AUTO_RFR_LEVEL1;
+
+ if (msm_port->is_uartdm)
+ mask = UART_DM_MR1_AUTO_RFR_LEVEL1;
+ else
+ mask = UART_MR1_AUTO_RFR_LEVEL1;
+
+ data &= ~mask;
data &= ~UART_MR1_AUTO_RFR_LEVEL0;
- data |= UART_MR1_AUTO_RFR_LEVEL1 & (rfr_level << 2);
+ data |= mask & (rfr_level << 2);
data |= UART_MR1_AUTO_RFR_LEVEL0 & rfr_level;
msm_write(port, data, UART_MR1);
+
+ if (msm_port->is_uartdm) {
+ msm_request_tx_dma(msm_port, msm_port->uart.mapbase);
+ msm_request_rx_dma(msm_port, msm_port->uart.mapbase);
+ }
+
return 0;
}
@@ -511,6 +1018,9 @@ static void msm_shutdown(struct uart_port *port)
msm_port->imr = 0;
msm_write(port, 0, UART_IMR); /* disable interrupts */
+ if (msm_port->is_uartdm)
+ msm_release_dma(msm_port);
+
clk_disable_unprepare(msm_port->clk);
free_irq(port->irq, port);
@@ -519,14 +1029,19 @@ static void msm_shutdown(struct uart_port *port)
static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
+ struct msm_port *msm_port = UART_TO_MSM(port);
+ struct msm_dma *dma = &msm_port->rx_dma;
unsigned long flags;
unsigned int baud, mr;
spin_lock_irqsave(&port->lock, flags);
+ if (dma->chan) /* Terminate if any */
+ msm_stop_dma(port, dma);
+
/* calculate and set baud rate */
- baud = uart_get_baud_rate(port, termios, old, 300, 115200);
- baud = msm_set_baud_rate(port, baud);
+ baud = uart_get_baud_rate(port, termios, old, 300, 4000000);
+ baud = msm_set_baud_rate(port, baud, &flags);
if (tty_termios_baud_rate(termios))
tty_termios_encode_baud_rate(termios, baud, baud);
@@ -588,6 +1103,9 @@ static void msm_set_termios(struct uart_port *port, struct ktermios *termios,
uart_update_timeout(port, termios->c_cflag, baud);
+ /* Try to use DMA */
+ msm_start_rx_dma(msm_port);
+
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -765,7 +1283,7 @@ static void msm_poll_put_char(struct uart_port *port, unsigned char c)
msm_write(port, 0, UART_IMR);
if (msm_port->is_uartdm)
- reset_dm_count(port, 1);
+ msm_reset_dm_count(port, 1);
/* Wait until FIFO is empty */
while (!(msm_read(port, UART_SR) & UART_SR_TX_READY))
@@ -839,7 +1357,7 @@ static struct msm_port msm_uart_ports[] = {
#define UART_NR ARRAY_SIZE(msm_uart_ports)
-static inline struct uart_port *get_port_from_line(unsigned int line)
+static inline struct uart_port *msm_get_port_from_line(unsigned int line)
{
return &msm_uart_ports[line].uart;
}
@@ -866,7 +1384,7 @@ static void __msm_console_write(struct uart_port *port, const char *s,
spin_lock(&port->lock);
if (is_uartdm)
- reset_dm_count(port, count);
+ msm_reset_dm_count(port, count);
i = 0;
while (i < count) {
@@ -911,7 +1429,7 @@ static void msm_console_write(struct console *co, const char *s,
BUG_ON(co->index < 0 || co->index >= UART_NR);
- port = get_port_from_line(co->index);
+ port = msm_get_port_from_line(co->index);
msm_port = UART_TO_MSM(port);
__msm_console_write(port, s, count, msm_port->is_uartdm);
@@ -928,7 +1446,7 @@ static int __init msm_console_setup(struct console *co, char *options)
if (unlikely(co->index >= UART_NR || co->index < 0))
return -ENXIO;
- port = get_port_from_line(co->index);
+ port = msm_get_port_from_line(co->index);
if (unlikely(!port->membase))
return -ENXIO;
@@ -1043,7 +1561,7 @@ static int msm_serial_probe(struct platform_device *pdev)
dev_info(&pdev->dev, "msm_serial: detected port #%d\n", line);
- port = get_port_from_line(line);
+ port = msm_get_port_from_line(line);
port->dev = &pdev->dev;
msm_port = UART_TO_MSM(port);
diff --git a/kernel/drivers/tty/serial/msm_serial.h b/kernel/drivers/tty/serial/msm_serial.h
index 737f69fe7..178645826 100644
--- a/kernel/drivers/tty/serial/msm_serial.h
+++ b/kernel/drivers/tty/serial/msm_serial.h
@@ -20,11 +20,12 @@
#define UART_MR1_AUTO_RFR_LEVEL0 0x3F
#define UART_MR1_AUTO_RFR_LEVEL1 0x3FF00
-#define UART_MR1_RX_RDY_CTL (1 << 7)
-#define UART_MR1_CTS_CTL (1 << 6)
+#define UART_DM_MR1_AUTO_RFR_LEVEL1 0xFFFFFF00
+#define UART_MR1_RX_RDY_CTL BIT(7)
+#define UART_MR1_CTS_CTL BIT(6)
#define UART_MR2 0x0004
-#define UART_MR2_ERROR_MODE (1 << 6)
+#define UART_MR2_ERROR_MODE BIT(6)
#define UART_MR2_BITS_PER_CHAR 0x30
#define UART_MR2_BITS_PER_CHAR_5 (0x0 << 4)
#define UART_MR2_BITS_PER_CHAR_6 (0x1 << 4)
@@ -58,26 +59,28 @@
#define UART_CR_CMD_SET_RFR (13 << 4)
#define UART_CR_CMD_RESET_RFR (14 << 4)
#define UART_CR_CMD_PROTECTION_EN (16 << 4)
+#define UART_CR_CMD_STALE_EVENT_DISABLE (6 << 8)
#define UART_CR_CMD_STALE_EVENT_ENABLE (80 << 4)
#define UART_CR_CMD_FORCE_STALE (4 << 8)
#define UART_CR_CMD_RESET_TX_READY (3 << 8)
-#define UART_CR_TX_DISABLE (1 << 3)
-#define UART_CR_TX_ENABLE (1 << 2)
-#define UART_CR_RX_DISABLE (1 << 1)
-#define UART_CR_RX_ENABLE (1 << 0)
+#define UART_CR_TX_DISABLE BIT(3)
+#define UART_CR_TX_ENABLE BIT(2)
+#define UART_CR_RX_DISABLE BIT(1)
+#define UART_CR_RX_ENABLE BIT(0)
#define UART_CR_CMD_RESET_RXBREAK_START ((1 << 11) | (2 << 4))
#define UART_IMR 0x0014
-#define UART_IMR_TXLEV (1 << 0)
-#define UART_IMR_RXSTALE (1 << 3)
-#define UART_IMR_RXLEV (1 << 4)
-#define UART_IMR_DELTA_CTS (1 << 5)
-#define UART_IMR_CURRENT_CTS (1 << 6)
-#define UART_IMR_RXBREAK_START (1 << 10)
+#define UART_IMR_TXLEV BIT(0)
+#define UART_IMR_RXSTALE BIT(3)
+#define UART_IMR_RXLEV BIT(4)
+#define UART_IMR_DELTA_CTS BIT(5)
+#define UART_IMR_CURRENT_CTS BIT(6)
+#define UART_IMR_RXBREAK_START BIT(10)
#define UART_IPR_RXSTALE_LAST 0x20
#define UART_IPR_STALE_LSB 0x1F
#define UART_IPR_STALE_TIMEOUT_MSB 0x3FF80
+#define UART_DM_IPR_STALE_TIMEOUT_MSB 0xFFFFFF80
#define UART_IPR 0x0018
#define UART_TFWR 0x001C
@@ -96,20 +99,20 @@
#define UART_TEST_CTRL 0x0050
#define UART_SR 0x0008
-#define UART_SR_HUNT_CHAR (1 << 7)
-#define UART_SR_RX_BREAK (1 << 6)
-#define UART_SR_PAR_FRAME_ERR (1 << 5)
-#define UART_SR_OVERRUN (1 << 4)
-#define UART_SR_TX_EMPTY (1 << 3)
-#define UART_SR_TX_READY (1 << 2)
-#define UART_SR_RX_FULL (1 << 1)
-#define UART_SR_RX_READY (1 << 0)
+#define UART_SR_HUNT_CHAR BIT(7)
+#define UART_SR_RX_BREAK BIT(6)
+#define UART_SR_PAR_FRAME_ERR BIT(5)
+#define UART_SR_OVERRUN BIT(4)
+#define UART_SR_TX_EMPTY BIT(3)
+#define UART_SR_TX_READY BIT(2)
+#define UART_SR_RX_FULL BIT(1)
+#define UART_SR_RX_READY BIT(0)
#define UART_RF 0x000C
#define UARTDM_RF 0x0070
#define UART_MISR 0x0010
#define UART_ISR 0x0014
-#define UART_ISR_TX_READY (1 << 7)
+#define UART_ISR_TX_READY BIT(7)
#define UARTDM_RXFS 0x50
#define UARTDM_RXFS_BUF_SHIFT 0x7
@@ -119,6 +122,12 @@
#define UARTDM_DMEN_RX_SC_ENABLE BIT(5)
#define UARTDM_DMEN_TX_SC_ENABLE BIT(4)
+#define UARTDM_DMEN_TX_BAM_ENABLE BIT(2) /* UARTDM_1P4 */
+#define UARTDM_DMEN_TX_DM_ENABLE BIT(0) /* < UARTDM_1P4 */
+
+#define UARTDM_DMEN_RX_BAM_ENABLE BIT(3) /* UARTDM_1P4 */
+#define UARTDM_DMEN_RX_DM_ENABLE BIT(1) /* < UARTDM_1P4 */
+
#define UARTDM_DMRX 0x34
#define UARTDM_NCF_TX 0x40
#define UARTDM_RX_TOTAL_SNAP 0x38
diff --git a/kernel/drivers/tty/serial/msm_smd_tty.c b/kernel/drivers/tty/serial/msm_smd_tty.c
deleted file mode 100644
index 1238ac370..000000000
--- a/kernel/drivers/tty/serial/msm_smd_tty.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/cdev.h>
-#include <linux/device.h>
-#include <linux/wait.h>
-
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-
-#include <mach/msm_smd.h>
-
-#define MAX_SMD_TTYS 32
-
-struct smd_tty_info {
- struct tty_port port;
- smd_channel_t *ch;
-};
-
-struct smd_tty_channel_desc {
- int id;
- const char *name;
-};
-
-static struct smd_tty_info smd_tty[MAX_SMD_TTYS];
-
-static const struct smd_tty_channel_desc smd_default_tty_channels[] = {
- { .id = 0, .name = "SMD_DS" },
- { .id = 27, .name = "SMD_GPSNMEA" },
-};
-
-static const struct smd_tty_channel_desc *smd_tty_channels =
- smd_default_tty_channels;
-static int smd_tty_channels_len = ARRAY_SIZE(smd_default_tty_channels);
-
-static void smd_tty_notify(void *priv, unsigned event)
-{
- unsigned char *ptr;
- int avail;
- struct smd_tty_info *info = priv;
- struct tty_struct *tty;
-
- if (event != SMD_EVENT_DATA)
- return;
-
- tty = tty_port_tty_get(&info->port);
- if (!tty)
- return;
-
- for (;;) {
- if (test_bit(TTY_THROTTLED, &tty->flags))
- break;
- avail = smd_read_avail(info->ch);
- if (avail == 0)
- break;
-
- avail = tty_prepare_flip_string(&info->port, &ptr, avail);
-
- if (smd_read(info->ch, ptr, avail) != avail) {
- /* shouldn't be possible since we're in interrupt
- ** context here and nobody else could 'steal' our
- ** characters.
- */
- pr_err("OOPS - smd_tty_buffer mismatch?!");
- }
-
- tty_flip_buffer_push(&info->port);
- }
-
- /* XXX only when writable and necessary */
- tty_wakeup(tty);
- tty_kref_put(tty);
-}
-
-static int smd_tty_port_activate(struct tty_port *tport, struct tty_struct *tty)
-{
- struct smd_tty_info *info = container_of(tport, struct smd_tty_info,
- port);
- int i, res = 0;
- const char *name = NULL;
-
- for (i = 0; i < smd_tty_channels_len; i++) {
- if (smd_tty_channels[i].id == tty->index) {
- name = smd_tty_channels[i].name;
- break;
- }
- }
- if (!name)
- return -ENODEV;
-
- if (info->ch)
- smd_kick(info->ch);
- else
- res = smd_open(name, &info->ch, info, smd_tty_notify);
-
- if (!res)
- tty->driver_data = info;
-
- return res;
-}
-
-static void smd_tty_port_shutdown(struct tty_port *tport)
-{
- struct smd_tty_info *info = container_of(tport, struct smd_tty_info,
- port);
-
- if (info->ch) {
- smd_close(info->ch);
- info->ch = 0;
- }
-}
-
-static int smd_tty_open(struct tty_struct *tty, struct file *f)
-{
- struct smd_tty_info *info = smd_tty + tty->index;
-
- return tty_port_open(&info->port, tty, f);
-}
-
-static void smd_tty_close(struct tty_struct *tty, struct file *f)
-{
- struct smd_tty_info *info = tty->driver_data;
-
- tty_port_close(&info->port, tty, f);
-}
-
-static int smd_tty_write(struct tty_struct *tty,
- const unsigned char *buf, int len)
-{
- struct smd_tty_info *info = tty->driver_data;
- int avail;
-
- /* if we're writing to a packet channel we will
- ** never be able to write more data than there
- ** is currently space for
- */
- avail = smd_write_avail(info->ch);
- if (len > avail)
- len = avail;
-
- return smd_write(info->ch, buf, len);
-}
-
-static int smd_tty_write_room(struct tty_struct *tty)
-{
- struct smd_tty_info *info = tty->driver_data;
- return smd_write_avail(info->ch);
-}
-
-static int smd_tty_chars_in_buffer(struct tty_struct *tty)
-{
- struct smd_tty_info *info = tty->driver_data;
- return smd_read_avail(info->ch);
-}
-
-static void smd_tty_unthrottle(struct tty_struct *tty)
-{
- struct smd_tty_info *info = tty->driver_data;
- smd_kick(info->ch);
-}
-
-static const struct tty_port_operations smd_tty_port_ops = {
- .shutdown = smd_tty_port_shutdown,
- .activate = smd_tty_port_activate,
-};
-
-static const struct tty_operations smd_tty_ops = {
- .open = smd_tty_open,
- .close = smd_tty_close,
- .write = smd_tty_write,
- .write_room = smd_tty_write_room,
- .chars_in_buffer = smd_tty_chars_in_buffer,
- .unthrottle = smd_tty_unthrottle,
-};
-
-static struct tty_driver *smd_tty_driver;
-
-static int __init smd_tty_init(void)
-{
- int ret, i;
-
- smd_tty_driver = alloc_tty_driver(MAX_SMD_TTYS);
- if (smd_tty_driver == 0)
- return -ENOMEM;
-
- smd_tty_driver->driver_name = "smd_tty_driver";
- smd_tty_driver->name = "smd";
- smd_tty_driver->major = 0;
- smd_tty_driver->minor_start = 0;
- smd_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
- smd_tty_driver->subtype = SERIAL_TYPE_NORMAL;
- smd_tty_driver->init_termios = tty_std_termios;
- smd_tty_driver->init_termios.c_iflag = 0;
- smd_tty_driver->init_termios.c_oflag = 0;
- smd_tty_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
- smd_tty_driver->init_termios.c_lflag = 0;
- smd_tty_driver->flags = TTY_DRIVER_RESET_TERMIOS |
- TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
- tty_set_operations(smd_tty_driver, &smd_tty_ops);
-
- ret = tty_register_driver(smd_tty_driver);
- if (ret)
- return ret;
-
- for (i = 0; i < smd_tty_channels_len; i++) {
- struct tty_port *port = &smd_tty[smd_tty_channels[i].id].port;
- tty_port_init(port);
- port->ops = &smd_tty_port_ops;
- tty_port_register_device(port, smd_tty_driver,
- smd_tty_channels[i].id, NULL);
- }
-
- return 0;
-}
-
-module_init(smd_tty_init);
diff --git a/kernel/drivers/tty/serial/mux.c b/kernel/drivers/tty/serial/mux.c
index dd26511ad..8a4be4b73 100644
--- a/kernel/drivers/tty/serial/mux.c
+++ b/kernel/drivers/tty/serial/mux.c
@@ -412,19 +412,14 @@ static int mux_console_setup(struct console *co, char *options)
return 0;
}
-struct tty_driver *mux_console_device(struct console *co, int *index)
-{
- *index = co->index;
- return mux_driver.tty_driver;
-}
-
static struct console mux_console = {
.name = "ttyB",
.write = mux_console_write,
- .device = mux_console_device,
+ .device = uart_console_device,
.setup = mux_console_setup,
.flags = CON_ENABLED | CON_PRINTBUFFER,
.index = 0,
+ .data = &mux_driver,
};
#define MUX_CONSOLE &mux_console
diff --git a/kernel/drivers/tty/serial/mxs-auart.c b/kernel/drivers/tty/serial/mxs-auart.c
index f7e5825b5..cd0414bbe 100644
--- a/kernel/drivers/tty/serial/mxs-auart.c
+++ b/kernel/drivers/tty/serial/mxs-auart.c
@@ -100,6 +100,8 @@
#define AUART_CTRL2_TXE (1 << 8)
#define AUART_CTRL2_UARTEN (1 << 0)
+#define AUART_LINECTRL_BAUD_DIV_MAX 0x003fffc0
+#define AUART_LINECTRL_BAUD_DIV_MIN 0x000000ec
#define AUART_LINECTRL_BAUD_DIVINT_SHIFT 16
#define AUART_LINECTRL_BAUD_DIVINT_MASK 0xffff0000
#define AUART_LINECTRL_BAUD_DIVINT(v) (((v) & 0xffff) << 16)
@@ -169,7 +171,7 @@ struct mxs_auart_port {
bool ms_irq_enabled;
};
-static struct platform_device_id mxs_auart_devtype[] = {
+static const struct platform_device_id mxs_auart_devtype[] = {
{ .name = "mxs-auart-imx23", .driver_data = IMX23_AUART },
{ .name = "mxs-auart-imx28", .driver_data = IMX28_AUART },
{ /* sentinel */ }
@@ -659,7 +661,7 @@ static void mxs_auart_settermios(struct uart_port *u,
{
struct mxs_auart_port *s = to_auart_port(u);
u32 bm, ctrl, ctrl2, div;
- unsigned int cflag, baud;
+ unsigned int cflag, baud, baud_min, baud_max;
cflag = termios->c_cflag;
@@ -752,7 +754,9 @@ static void mxs_auart_settermios(struct uart_port *u,
}
/* set baud rate */
- baud = uart_get_baud_rate(u, termios, old, 0, u->uartclk);
+ baud_min = DIV_ROUND_UP(u->uartclk * 32, AUART_LINECTRL_BAUD_DIV_MAX);
+ baud_max = u->uartclk * 32 / AUART_LINECTRL_BAUD_DIV_MIN;
+ baud = uart_get_baud_rate(u, termios, old, baud_min, baud_max);
div = u->uartclk * 32 / baud;
ctrl |= AUART_LINECTRL_BAUD_DIVFRAC(div & 0x3F);
ctrl |= AUART_LINECTRL_BAUD_DIVINT(div >> 6);
@@ -842,7 +846,7 @@ static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
return IRQ_HANDLED;
}
-static void mxs_auart_reset(struct uart_port *u)
+static void mxs_auart_reset_deassert(struct uart_port *u)
{
int i;
unsigned int reg;
@@ -858,6 +862,30 @@ static void mxs_auart_reset(struct uart_port *u)
writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR);
}
+static void mxs_auart_reset_assert(struct uart_port *u)
+{
+ int i;
+ u32 reg;
+
+ reg = readl(u->membase + AUART_CTRL0);
+ /* if already in reset state, keep it untouched */
+ if (reg & AUART_CTRL0_SFTRST)
+ return;
+
+ writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR);
+ writel(AUART_CTRL0_SFTRST, u->membase + AUART_CTRL0_SET);
+
+ for (i = 0; i < 1000; i++) {
+ reg = readl(u->membase + AUART_CTRL0);
+ /* reset is finished when the clock is gated */
+ if (reg & AUART_CTRL0_CLKGATE)
+ return;
+ udelay(10);
+ }
+
+ dev_err(u->dev, "Failed to reset the unit.");
+}
+
static int mxs_auart_startup(struct uart_port *u)
{
int ret;
@@ -867,7 +895,13 @@ static int mxs_auart_startup(struct uart_port *u)
if (ret)
return ret;
- writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR);
+ if (uart_console(u)) {
+ writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR);
+ } else {
+ /* reset the unit to a well known state */
+ mxs_auart_reset_assert(u);
+ mxs_auart_reset_deassert(u);
+ }
writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_SET);
@@ -899,12 +933,14 @@ static void mxs_auart_shutdown(struct uart_port *u)
if (auart_dma_enabled(s))
mxs_auart_dma_exit(s);
- writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_CLR);
-
- writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
- u->membase + AUART_INTR_CLR);
-
- writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_SET);
+ if (uart_console(u)) {
+ writel(AUART_CTRL2_UARTEN, u->membase + AUART_CTRL2_CLR);
+ writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN,
+ u->membase + AUART_INTR_CLR);
+ writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_SET);
+ } else {
+ mxs_auart_reset_assert(u);
+ }
clk_disable_unprepare(s->clk);
}
@@ -1160,7 +1196,7 @@ static int mxs_auart_init_gpios(struct mxs_auart_port *s, struct device *dev)
enum mctrl_gpio_idx i;
struct gpio_desc *gpiod;
- s->gpios = mctrl_gpio_init(dev, 0);
+ s->gpios = mctrl_gpio_init_noauto(dev, 0);
if (IS_ERR(s->gpios))
return PTR_ERR(s->gpios);
@@ -1291,7 +1327,7 @@ static int mxs_auart_probe(struct platform_device *pdev)
auart_port[s->port.line] = s;
- mxs_auart_reset(&s->port);
+ mxs_auart_reset_deassert(&s->port);
ret = uart_add_one_port(&auart_driver, &s->port);
if (ret)
diff --git a/kernel/drivers/tty/serial/of_serial.c b/kernel/drivers/tty/serial/of_serial.c
index 137381e64..de5029649 100644
--- a/kernel/drivers/tty/serial/of_serial.c
+++ b/kernel/drivers/tty/serial/of_serial.c
@@ -21,6 +21,10 @@
#include <linux/nwpserial.h>
#include <linux/clk.h>
+#ifdef CONFIG_SERIAL_8250_MODULE
+#define CONFIG_SERIAL_8250 CONFIG_SERIAL_8250_MODULE
+#endif
+
#include "8250/8250.h"
struct of_serial_info {
@@ -67,14 +71,17 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
if (of_property_read_u32(np, "clock-frequency", &clk)) {
/* Get clk rate through clk driver if present */
- info->clk = clk_get(&ofdev->dev, NULL);
+ info->clk = devm_clk_get(&ofdev->dev, NULL);
if (IS_ERR(info->clk)) {
dev_warn(&ofdev->dev,
"clk or clock-frequency not defined\n");
return PTR_ERR(info->clk);
}
- clk_prepare_enable(info->clk);
+ ret = clk_prepare_enable(info->clk);
+ if (ret < 0)
+ return ret;
+
clk = clk_get_rate(info->clk);
}
/* If current-speed was set, then try not to change it. */
@@ -147,6 +154,11 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
break;
}
+ if (IS_ENABLED(CONFIG_SERIAL_8250_FSL) &&
+ (of_device_is_compatible(np, "fsl,ns16550") ||
+ of_device_is_compatible(np, "fsl,16550-FIFO64")))
+ port->handle_irq = fsl8250_handle_irq;
+
return 0;
out:
if (info->clk)
@@ -188,7 +200,6 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
{
struct uart_8250_port port8250;
memset(&port8250, 0, sizeof(port8250));
- port.type = port_type;
port8250.port = port;
if (port.fifosize)
@@ -348,6 +359,7 @@ static const struct of_device_id of_platform_serial_table[] = {
#endif
{ /* end of list */ },
};
+MODULE_DEVICE_TABLE(of, of_platform_serial_table);
static struct platform_driver of_platform_serial_driver = {
.driver = {
diff --git a/kernel/drivers/tty/serial/omap-serial.c b/kernel/drivers/tty/serial/omap-serial.c
index f9d192f67..9745fb8b7 100644
--- a/kernel/drivers/tty/serial/omap-serial.c
+++ b/kernel/drivers/tty/serial/omap-serial.c
@@ -38,6 +38,7 @@
#include <linux/serial_core.h>
#include <linux/irq.h>
#include <linux/pm_runtime.h>
+#include <linux/pm_wakeirq.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/gpio.h>
@@ -160,7 +161,6 @@ struct uart_omap_port {
unsigned long port_activity;
int context_loss_cnt;
u32 errata;
- u8 wakeups_enabled;
u32 features;
int rts_gpio;
@@ -199,6 +199,7 @@ static inline void serial_omap_clear_fifos(struct uart_omap_port *up)
serial_out(up, UART_FCR, 0);
}
+#ifdef CONFIG_PM
static int serial_omap_get_context_loss_count(struct uart_omap_port *up)
{
struct omap_uart_port_info *pdata = dev_get_platdata(up->dev);
@@ -209,33 +210,17 @@ static int serial_omap_get_context_loss_count(struct uart_omap_port *up)
return pdata->get_context_loss_count(up->dev);
}
-static inline void serial_omap_enable_wakeirq(struct uart_omap_port *up,
- bool enable)
-{
- if (!up->wakeirq)
- return;
-
- if (enable)
- enable_irq(up->wakeirq);
- else
- disable_irq_nosync(up->wakeirq);
-}
-
+/* REVISIT: Remove this when omap3 boots in device tree only mode */
static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable)
{
struct omap_uart_port_info *pdata = dev_get_platdata(up->dev);
- if (enable == up->wakeups_enabled)
- return;
-
- serial_omap_enable_wakeirq(up, enable);
- up->wakeups_enabled = enable;
-
if (!pdata || !pdata->enable_wakeup)
return;
pdata->enable_wakeup(up->dev, enable);
}
+#endif /* CONFIG_PM */
/*
* Calculate the absolute difference between the desired and actual baud
@@ -750,13 +735,11 @@ static int serial_omap_startup(struct uart_port *port)
/* Optional wake-up IRQ */
if (up->wakeirq) {
- retval = request_irq(up->wakeirq, serial_omap_irq,
- up->port.irqflags, up->name, up);
+ retval = dev_pm_set_dedicated_wake_irq(up->dev, up->wakeirq);
if (retval) {
free_irq(up->port.irq, up);
return retval;
}
- disable_irq(up->wakeirq);
}
dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line);
@@ -845,8 +828,7 @@ static void serial_omap_shutdown(struct uart_port *port)
pm_runtime_mark_last_busy(up->dev);
pm_runtime_put_autosuspend(up->dev);
free_irq(up->port.irq, up);
- if (up->wakeirq)
- free_irq(up->wakeirq, up);
+ dev_pm_clear_wake_irq(up->dev);
}
static void serial_omap_uart_qos_work(struct work_struct *work)
@@ -1139,13 +1121,6 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
serial_out(up, UART_EFR, efr);
serial_out(up, UART_LCR, 0);
- if (!device_may_wakeup(up->dev)) {
- if (!state)
- pm_runtime_forbid(up->dev);
- else
- pm_runtime_allow(up->dev);
- }
-
pm_runtime_mark_last_busy(up->dev);
pm_runtime_put_autosuspend(up->dev);
}
@@ -1364,7 +1339,7 @@ static inline void serial_omap_add_console_port(struct uart_omap_port *up)
/* Enable or disable the rs485 support */
static int
-serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
+serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485)
{
struct uart_omap_port *up = to_uart_omap_port(port);
unsigned int mode;
@@ -1377,8 +1352,12 @@ serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
up->ier = 0;
serial_out(up, UART_IER, 0);
+ /* Clamp the delays to [0, 100ms] */
+ rs485->delay_rts_before_send = min(rs485->delay_rts_before_send, 100U);
+ rs485->delay_rts_after_send = min(rs485->delay_rts_after_send, 100U);
+
/* store new config */
- port->rs485 = *rs485conf;
+ port->rs485 = *rs485;
/*
* Just as a precaution, only allow rs485
diff --git a/kernel/drivers/tty/serial/samsung.c b/kernel/drivers/tty/serial/samsung.c
index 1e0d9b8c4..d72cd736b 100644
--- a/kernel/drivers/tty/serial/samsung.c
+++ b/kernel/drivers/tty/serial/samsung.c
@@ -53,7 +53,6 @@
#include "samsung.h"
#if defined(CONFIG_SERIAL_SAMSUNG_DEBUG) && \
- defined(CONFIG_DEBUG_LL) && \
!defined(MODULE)
extern void printascii(const char *);
@@ -341,7 +340,7 @@ static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport)
s3c24xx_serial_start_tx_dma(ourport, count);
}
-void s3c24xx_serial_start_tx(struct uart_port *port)
+static void s3c24xx_serial_start_tx(struct uart_port *port)
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
struct circ_buf *xmit = &port->state->xmit;
@@ -386,32 +385,6 @@ static void s3c24xx_uart_copy_rx_to_tty(struct s3c24xx_uart_port *ourport,
}
}
-static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
- unsigned long ufstat);
-
-static void uart_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
-{
- struct uart_port *port = &ourport->port;
- struct tty_port *tty = &port->state->port;
- unsigned int ch, ufstat;
- unsigned int count;
-
- ufstat = rd_regl(port, S3C2410_UFSTAT);
- count = s3c24xx_serial_rx_fifocnt(ourport, ufstat);
-
- if (!count)
- return;
-
- while (count-- > 0) {
- ch = rd_regb(port, S3C2410_URXH);
-
- ourport->port.icount.rx++;
- tty_insert_flip_char(tty, ch, TTY_NORMAL);
- }
-
- tty_flip_buffer_push(tty);
-}
-
static void s3c24xx_serial_stop_rx(struct uart_port *port)
{
struct s3c24xx_uart_port *ourport = to_ourport(port);
@@ -574,7 +547,9 @@ static void enable_rx_pio(struct s3c24xx_uart_port *ourport)
ourport->rx_mode = S3C24XX_RX_PIO;
}
-static irqreturn_t s3c24xx_serial_rx_chars_dma(int irq, void *dev_id)
+static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport);
+
+static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id)
{
unsigned int utrstat, ufstat, received;
struct s3c24xx_uart_port *ourport = dev_id;
@@ -607,7 +582,7 @@ static irqreturn_t s3c24xx_serial_rx_chars_dma(int irq, void *dev_id)
enable_rx_pio(ourport);
}
- uart_rx_drain_fifo(ourport);
+ s3c24xx_serial_rx_drain_fifo(ourport);
if (tty) {
tty_flip_buffer_push(t);
@@ -622,16 +597,12 @@ finish:
return IRQ_HANDLED;
}
-static irqreturn_t s3c24xx_serial_rx_chars_pio(int irq, void *dev_id)
+static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
{
- struct s3c24xx_uart_port *ourport = dev_id;
struct uart_port *port = &ourport->port;
unsigned int ufcon, ch, flag, ufstat, uerstat;
- unsigned long flags;
int max_count = port->fifosize;
- spin_lock_irqsave(&port->lock, flags);
-
while (max_count-- > 0) {
ufcon = rd_regl(port, S3C2410_UFCON);
ufstat = rd_regl(port, S3C2410_UFSTAT);
@@ -655,9 +626,7 @@ static irqreturn_t s3c24xx_serial_rx_chars_pio(int irq, void *dev_id)
ufcon |= S3C2410_UFCON_RESETRX;
wr_regl(port, S3C2410_UFCON, ufcon);
rx_enabled(port) = 1;
- spin_unlock_irqrestore(&port->lock,
- flags);
- goto out;
+ return;
}
continue;
}
@@ -677,7 +646,7 @@ static irqreturn_t s3c24xx_serial_rx_chars_pio(int irq, void *dev_id)
dbg("break!\n");
port->icount.brk++;
if (uart_handle_break(port))
- goto ignore_char;
+ continue; /* Ignore character */
}
if (uerstat & S3C2410_UERSTAT_FRAME)
@@ -697,19 +666,25 @@ static irqreturn_t s3c24xx_serial_rx_chars_pio(int irq, void *dev_id)
}
if (uart_handle_sysrq_char(port, ch))
- goto ignore_char;
+ continue; /* Ignore character */
uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN,
ch, flag);
-
-ignore_char:
- continue;
}
- spin_unlock_irqrestore(&port->lock, flags);
tty_flip_buffer_push(&port->state->port);
+}
+
+static irqreturn_t s3c24xx_serial_rx_chars_pio(void *dev_id)
+{
+ struct s3c24xx_uart_port *ourport = dev_id;
+ struct uart_port *port = &ourport->port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ s3c24xx_serial_rx_drain_fifo(ourport);
+ spin_unlock_irqrestore(&port->lock, flags);
-out:
return IRQ_HANDLED;
}
@@ -719,8 +694,8 @@ static irqreturn_t s3c24xx_serial_rx_chars(int irq, void *dev_id)
struct s3c24xx_uart_port *ourport = dev_id;
if (ourport->dma && ourport->dma->rx_chan)
- return s3c24xx_serial_rx_chars_dma(irq, dev_id);
- return s3c24xx_serial_rx_chars_pio(irq, dev_id);
+ return s3c24xx_serial_rx_chars_dma(dev_id);
+ return s3c24xx_serial_rx_chars_pio(dev_id);
}
static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
@@ -2352,7 +2327,7 @@ static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = {
#define EXYNOS5433_SERIAL_DRV_DATA (kernel_ulong_t)NULL
#endif
-static struct platform_device_id s3c24xx_serial_driver_ids[] = {
+static const struct platform_device_id s3c24xx_serial_driver_ids[] = {
{
.name = "s3c2410-uart",
.driver_data = S3C2410_SERIAL_DRV_DATA,
diff --git a/kernel/drivers/tty/serial/sc16is7xx.c b/kernel/drivers/tty/serial/sc16is7xx.c
index 468354ef7..7d5ee8a13 100644
--- a/kernel/drivers/tty/serial/sc16is7xx.c
+++ b/kernel/drivers/tty/serial/sc16is7xx.c
@@ -11,6 +11,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/delay.h>
@@ -25,9 +27,11 @@
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
+#include <linux/spi/spi.h>
#include <linux/uaccess.h>
#define SC16IS7XX_NAME "sc16is7xx"
+#define SC16IS7XX_MAX_DEVS 8
/* SC16IS7XX register definitions */
#define SC16IS7XX_RHR_REG (0x00) /* RX FIFO */
@@ -300,34 +304,62 @@ struct sc16is7xx_devtype {
int nr_uart;
};
+#define SC16IS7XX_RECONF_MD (1 << 0)
+#define SC16IS7XX_RECONF_IER (1 << 1)
+#define SC16IS7XX_RECONF_RS485 (1 << 2)
+
+struct sc16is7xx_one_config {
+ unsigned int flags;
+ u8 ier_clear;
+};
+
struct sc16is7xx_one {
struct uart_port port;
- struct work_struct tx_work;
- struct work_struct md_work;
+ u8 line;
+ struct kthread_work tx_work;
+ struct kthread_work reg_work;
+ struct sc16is7xx_one_config config;
};
struct sc16is7xx_port {
- struct uart_driver uart;
- struct sc16is7xx_devtype *devtype;
+ const struct sc16is7xx_devtype *devtype;
struct regmap *regmap;
- struct mutex mutex;
struct clk *clk;
#ifdef CONFIG_GPIOLIB
struct gpio_chip gpio;
#endif
unsigned char buf[SC16IS7XX_FIFO_SIZE];
+ struct kthread_worker kworker;
+ struct task_struct *kworker_task;
+ struct kthread_work irq_work;
struct sc16is7xx_one p[0];
};
+static unsigned long sc16is7xx_lines;
+
+static struct uart_driver sc16is7xx_uart = {
+ .owner = THIS_MODULE,
+ .dev_name = "ttySC",
+ .nr = SC16IS7XX_MAX_DEVS,
+};
+
+#define to_sc16is7xx_port(p,e) ((container_of((p), struct sc16is7xx_port, e)))
#define to_sc16is7xx_one(p,e) ((container_of((p), struct sc16is7xx_one, e)))
+static int sc16is7xx_line(struct uart_port *port)
+{
+ struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+
+ return one->line;
+}
+
static u8 sc16is7xx_port_read(struct uart_port *port, u8 reg)
{
struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
unsigned int val = 0;
+ const u8 line = sc16is7xx_line(port);
- regmap_read(s->regmap,
- (reg << SC16IS7XX_REG_SHIFT) | port->line, &val);
+ regmap_read(s->regmap, (reg << SC16IS7XX_REG_SHIFT) | line, &val);
return val;
}
@@ -335,21 +367,55 @@ static u8 sc16is7xx_port_read(struct uart_port *port, u8 reg)
static void sc16is7xx_port_write(struct uart_port *port, u8 reg, u8 val)
{
struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+ const u8 line = sc16is7xx_line(port);
+
+ regmap_write(s->regmap, (reg << SC16IS7XX_REG_SHIFT) | line, val);
+}
+
+static void sc16is7xx_fifo_read(struct uart_port *port, unsigned int rxlen)
+{
+ struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+ const u8 line = sc16is7xx_line(port);
+ u8 addr = (SC16IS7XX_RHR_REG << SC16IS7XX_REG_SHIFT) | line;
+
+ regcache_cache_bypass(s->regmap, true);
+ regmap_raw_read(s->regmap, addr, s->buf, rxlen);
+ regcache_cache_bypass(s->regmap, false);
+}
+
+static void sc16is7xx_fifo_write(struct uart_port *port, u8 to_send)
+{
+ struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+ const u8 line = sc16is7xx_line(port);
+ u8 addr = (SC16IS7XX_THR_REG << SC16IS7XX_REG_SHIFT) | line;
- regmap_write(s->regmap,
- (reg << SC16IS7XX_REG_SHIFT) | port->line, val);
+ regcache_cache_bypass(s->regmap, true);
+ regmap_raw_write(s->regmap, addr, s->buf, to_send);
+ regcache_cache_bypass(s->regmap, false);
}
static void sc16is7xx_port_update(struct uart_port *port, u8 reg,
u8 mask, u8 val)
{
struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+ const u8 line = sc16is7xx_line(port);
- regmap_update_bits(s->regmap,
- (reg << SC16IS7XX_REG_SHIFT) | port->line,
+ regmap_update_bits(s->regmap, (reg << SC16IS7XX_REG_SHIFT) | line,
mask, val);
}
+static int sc16is7xx_alloc_line(void)
+{
+ int i;
+
+ BUILD_BUG_ON(SC16IS7XX_MAX_DEVS > BITS_PER_LONG);
+
+ for (i = 0; i < SC16IS7XX_MAX_DEVS; i++)
+ if (!test_and_set_bit(i, &sc16is7xx_lines))
+ break;
+
+ return i;
+}
static void sc16is7xx_power(struct uart_port *port, int on)
{
@@ -474,7 +540,7 @@ static void sc16is7xx_handle_rx(struct uart_port *port, unsigned int rxlen,
if (unlikely(rxlen >= sizeof(s->buf))) {
dev_warn_ratelimited(port->dev,
- "Port %i: Possible RX FIFO overrun: %d\n",
+ "ttySC%i: Possible RX FIFO overrun: %d\n",
port->line, rxlen);
port->icount.buf_overrun++;
/* Ensure sanity of RX level */
@@ -494,10 +560,7 @@ static void sc16is7xx_handle_rx(struct uart_port *port, unsigned int rxlen,
s->buf[0] = sc16is7xx_port_read(port, SC16IS7XX_RHR_REG);
bytes_read = 1;
} else {
- regcache_cache_bypass(s->regmap, true);
- regmap_raw_read(s->regmap, SC16IS7XX_RHR_REG,
- s->buf, rxlen);
- regcache_cache_bypass(s->regmap, false);
+ sc16is7xx_fifo_read(port, rxlen);
bytes_read = rxlen;
}
@@ -577,9 +640,8 @@ static void sc16is7xx_handle_tx(struct uart_port *port)
s->buf[i] = xmit->buf[xmit->tail];
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
}
- regcache_cache_bypass(s->regmap, true);
- regmap_raw_write(s->regmap, SC16IS7XX_THR_REG, s->buf, to_send);
- regcache_cache_bypass(s->regmap, false);
+
+ sc16is7xx_fifo_write(port, to_send);
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -615,94 +677,126 @@ static void sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno)
!!(msr & SC16IS7XX_MSR_CTS_BIT));
break;
case SC16IS7XX_IIR_THRI_SRC:
- mutex_lock(&s->mutex);
sc16is7xx_handle_tx(port);
- mutex_unlock(&s->mutex);
break;
default:
dev_err_ratelimited(port->dev,
- "Port %i: Unexpected interrupt: %x",
+ "ttySC%i: Unexpected interrupt: %x",
port->line, iir);
break;
}
} while (1);
}
-static irqreturn_t sc16is7xx_ist(int irq, void *dev_id)
+static void sc16is7xx_ist(struct kthread_work *ws)
{
- struct sc16is7xx_port *s = (struct sc16is7xx_port *)dev_id;
+ struct sc16is7xx_port *s = to_sc16is7xx_port(ws, irq_work);
int i;
- for (i = 0; i < s->uart.nr; ++i)
+ for (i = 0; i < s->devtype->nr_uart; ++i)
sc16is7xx_port_irq(s, i);
+}
+
+static irqreturn_t sc16is7xx_irq(int irq, void *dev_id)
+{
+ struct sc16is7xx_port *s = (struct sc16is7xx_port *)dev_id;
+
+ queue_kthread_work(&s->kworker, &s->irq_work);
return IRQ_HANDLED;
}
-static void sc16is7xx_wq_proc(struct work_struct *ws)
+static void sc16is7xx_tx_proc(struct kthread_work *ws)
{
- struct sc16is7xx_one *one = to_sc16is7xx_one(ws, tx_work);
- struct sc16is7xx_port *s = dev_get_drvdata(one->port.dev);
+ struct uart_port *port = &(to_sc16is7xx_one(ws, tx_work)->port);
- mutex_lock(&s->mutex);
- sc16is7xx_handle_tx(&one->port);
- mutex_unlock(&s->mutex);
+ if ((port->rs485.flags & SER_RS485_ENABLED) &&
+ (port->rs485.delay_rts_before_send > 0))
+ msleep(port->rs485.delay_rts_before_send);
+
+ sc16is7xx_handle_tx(port);
}
-static void sc16is7xx_stop_tx(struct uart_port* port)
+static void sc16is7xx_reconf_rs485(struct uart_port *port)
{
- struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
- struct circ_buf *xmit = &one->port.state->xmit;
-
- /* handle rs485 */
- if (port->rs485.flags & SER_RS485_ENABLED) {
- /* do nothing if current tx not yet completed */
- int lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG);
- if (!(lsr & SC16IS7XX_LSR_TEMT_BIT))
- return;
-
- if (uart_circ_empty(xmit) &&
- (port->rs485.delay_rts_after_send > 0))
- mdelay(port->rs485.delay_rts_after_send);
+ const u32 mask = SC16IS7XX_EFCR_AUTO_RS485_BIT |
+ SC16IS7XX_EFCR_RTS_INVERT_BIT;
+ u32 efcr = 0;
+ struct serial_rs485 *rs485 = &port->rs485;
+ unsigned long irqflags;
+
+ spin_lock_irqsave(&port->lock, irqflags);
+ if (rs485->flags & SER_RS485_ENABLED) {
+ efcr |= SC16IS7XX_EFCR_AUTO_RS485_BIT;
+
+ if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
+ efcr |= SC16IS7XX_EFCR_RTS_INVERT_BIT;
}
+ spin_unlock_irqrestore(&port->lock, irqflags);
- sc16is7xx_port_update(port, SC16IS7XX_IER_REG,
- SC16IS7XX_IER_THRI_BIT,
- 0);
+ sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, mask, efcr);
+}
+
+static void sc16is7xx_reg_proc(struct kthread_work *ws)
+{
+ struct sc16is7xx_one *one = to_sc16is7xx_one(ws, reg_work);
+ struct sc16is7xx_one_config config;
+ unsigned long irqflags;
+
+ spin_lock_irqsave(&one->port.lock, irqflags);
+ config = one->config;
+ memset(&one->config, 0, sizeof(one->config));
+ spin_unlock_irqrestore(&one->port.lock, irqflags);
+
+ if (config.flags & SC16IS7XX_RECONF_MD)
+ sc16is7xx_port_update(&one->port, SC16IS7XX_MCR_REG,
+ SC16IS7XX_MCR_LOOP_BIT,
+ (one->port.mctrl & TIOCM_LOOP) ?
+ SC16IS7XX_MCR_LOOP_BIT : 0);
+
+ if (config.flags & SC16IS7XX_RECONF_IER)
+ sc16is7xx_port_update(&one->port, SC16IS7XX_IER_REG,
+ config.ier_clear, 0);
+
+ if (config.flags & SC16IS7XX_RECONF_RS485)
+ sc16is7xx_reconf_rs485(&one->port);
}
-static void sc16is7xx_stop_rx(struct uart_port* port)
+static void sc16is7xx_ier_clear(struct uart_port *port, u8 bit)
{
+ struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
- one->port.read_status_mask &= ~SC16IS7XX_LSR_DR_BIT;
- sc16is7xx_port_update(port, SC16IS7XX_IER_REG,
- SC16IS7XX_LSR_DR_BIT,
- 0);
+ one->config.flags |= SC16IS7XX_RECONF_IER;
+ one->config.ier_clear |= bit;
+ queue_kthread_work(&s->kworker, &one->reg_work);
+}
+
+static void sc16is7xx_stop_tx(struct uart_port *port)
+{
+ sc16is7xx_ier_clear(port, SC16IS7XX_IER_THRI_BIT);
+}
+
+static void sc16is7xx_stop_rx(struct uart_port *port)
+{
+ sc16is7xx_ier_clear(port, SC16IS7XX_IER_RDI_BIT);
}
static void sc16is7xx_start_tx(struct uart_port *port)
{
+ struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
- /* handle rs485 */
- if ((port->rs485.flags & SER_RS485_ENABLED) &&
- (port->rs485.delay_rts_before_send > 0)) {
- mdelay(port->rs485.delay_rts_before_send);
- }
-
- if (!work_pending(&one->tx_work))
- schedule_work(&one->tx_work);
+ queue_kthread_work(&s->kworker, &one->tx_work);
}
static unsigned int sc16is7xx_tx_empty(struct uart_port *port)
{
- unsigned int lvl, lsr;
+ unsigned int lsr;
- lvl = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG);
lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG);
- return ((lsr & SC16IS7XX_LSR_THRE_BIT) && !lvl) ? TIOCSER_TEMT : 0;
+ return (lsr & SC16IS7XX_LSR_TEMT_BIT) ? TIOCSER_TEMT : 0;
}
static unsigned int sc16is7xx_get_mctrl(struct uart_port *port)
@@ -713,21 +807,13 @@ static unsigned int sc16is7xx_get_mctrl(struct uart_port *port)
return TIOCM_DSR | TIOCM_CAR;
}
-static void sc16is7xx_md_proc(struct work_struct *ws)
-{
- struct sc16is7xx_one *one = to_sc16is7xx_one(ws, md_work);
-
- sc16is7xx_port_update(&one->port, SC16IS7XX_MCR_REG,
- SC16IS7XX_MCR_LOOP_BIT,
- (one->port.mctrl & TIOCM_LOOP) ?
- SC16IS7XX_MCR_LOOP_BIT : 0);
-}
-
static void sc16is7xx_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
+ struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
- schedule_work(&one->md_work);
+ one->config.flags |= SC16IS7XX_RECONF_MD;
+ queue_kthread_work(&s->kworker, &one->reg_work);
}
static void sc16is7xx_break_ctl(struct uart_port *port, int break_state)
@@ -831,9 +917,8 @@ static void sc16is7xx_set_termios(struct uart_port *port,
static int sc16is7xx_config_rs485(struct uart_port *port,
struct serial_rs485 *rs485)
{
- const u32 mask = SC16IS7XX_EFCR_AUTO_RS485_BIT |
- SC16IS7XX_EFCR_RTS_INVERT_BIT;
- u32 efcr = 0;
+ struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+ struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
if (rs485->flags & SER_RS485_ENABLED) {
bool rts_during_rx, rts_during_tx;
@@ -841,21 +926,23 @@ static int sc16is7xx_config_rs485(struct uart_port *port,
rts_during_rx = rs485->flags & SER_RS485_RTS_AFTER_SEND;
rts_during_tx = rs485->flags & SER_RS485_RTS_ON_SEND;
- efcr |= SC16IS7XX_EFCR_AUTO_RS485_BIT;
-
- if (!rts_during_rx && rts_during_tx)
- /* default */;
- else if (rts_during_rx && !rts_during_tx)
- efcr |= SC16IS7XX_EFCR_RTS_INVERT_BIT;
- else
+ if (rts_during_rx == rts_during_tx)
dev_err(port->dev,
"unsupported RTS signalling on_send:%d after_send:%d - exactly one of RS485 RTS flags should be set\n",
rts_during_tx, rts_during_rx);
- }
- sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, mask, efcr);
+ /*
+ * RTS signal is handled by HW, it's timing can't be influenced.
+ * However, it's sometimes useful to delay TX even without RTS
+ * control therefore we try to handle .delay_rts_before_send.
+ */
+ if (rs485->delay_rts_after_send)
+ return -EINVAL;
+ }
port->rs485 = *rs485;
+ one->config.flags |= SC16IS7XX_RECONF_RS485;
+ queue_kthread_work(&s->kworker, &one->reg_work);
return 0;
}
@@ -916,6 +1003,8 @@ static int sc16is7xx_startup(struct uart_port *port)
static void sc16is7xx_shutdown(struct uart_port *port)
{
+ struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+
/* Disable all interrupts */
sc16is7xx_port_write(port, SC16IS7XX_IER_REG, 0);
/* Disable TX/RX */
@@ -926,6 +1015,8 @@ static void sc16is7xx_shutdown(struct uart_port *port)
SC16IS7XX_EFCR_TXDISABLE_BIT);
sc16is7xx_power(port, 0);
+
+ flush_kthread_worker(&s->kworker);
}
static const char *sc16is7xx_type(struct uart_port *port)
@@ -1040,9 +1131,10 @@ static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip,
#endif
static int sc16is7xx_probe(struct device *dev,
- struct sc16is7xx_devtype *devtype,
+ const struct sc16is7xx_devtype *devtype,
struct regmap *regmap, int irq, unsigned long flags)
{
+ struct sched_param sched_param = { .sched_priority = MAX_RT_PRIO / 2 };
unsigned long freq, *pfreq = dev_get_platdata(dev);
int i, ret;
struct sc16is7xx_port *s;
@@ -1074,15 +1166,15 @@ static int sc16is7xx_probe(struct device *dev,
s->devtype = devtype;
dev_set_drvdata(dev, s);
- /* Register UART driver */
- s->uart.owner = THIS_MODULE;
- s->uart.dev_name = "ttySC";
- s->uart.nr = devtype->nr_uart;
- ret = uart_register_driver(&s->uart);
- if (ret) {
- dev_err(dev, "Registering UART driver failed\n");
+ init_kthread_worker(&s->kworker);
+ init_kthread_work(&s->irq_work, sc16is7xx_ist);
+ s->kworker_task = kthread_run(kthread_worker_fn, &s->kworker,
+ "sc16is7xx");
+ if (IS_ERR(s->kworker_task)) {
+ ret = PTR_ERR(s->kworker_task);
goto out_clk;
}
+ sched_setscheduler(s->kworker_task, SCHED_FIFO, &sched_param);
#ifdef CONFIG_GPIOLIB
if (devtype->nr_gpio) {
@@ -1099,15 +1191,13 @@ static int sc16is7xx_probe(struct device *dev,
s->gpio.can_sleep = 1;
ret = gpiochip_add(&s->gpio);
if (ret)
- goto out_uart;
+ goto out_thread;
}
#endif
- mutex_init(&s->mutex);
-
for (i = 0; i < devtype->nr_uart; ++i) {
+ s->p[i].line = i;
/* Initialize port data */
- s->p[i].port.line = i;
s->p[i].port.dev = dev;
s->p[i].port.irq = irq;
s->p[i].port.type = PORT_SC16IS7XX;
@@ -1117,40 +1207,46 @@ static int sc16is7xx_probe(struct device *dev,
s->p[i].port.uartclk = freq;
s->p[i].port.rs485_config = sc16is7xx_config_rs485;
s->p[i].port.ops = &sc16is7xx_ops;
+ s->p[i].port.line = sc16is7xx_alloc_line();
+ if (s->p[i].port.line >= SC16IS7XX_MAX_DEVS) {
+ ret = -ENOMEM;
+ goto out_ports;
+ }
+
/* Disable all interrupts */
sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_IER_REG, 0);
/* Disable TX/RX */
sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_EFCR_REG,
SC16IS7XX_EFCR_RXDISABLE_BIT |
SC16IS7XX_EFCR_TXDISABLE_BIT);
- /* Initialize queue for start TX */
- INIT_WORK(&s->p[i].tx_work, sc16is7xx_wq_proc);
- /* Initialize queue for changing mode */
- INIT_WORK(&s->p[i].md_work, sc16is7xx_md_proc);
+ /* Initialize kthread work structs */
+ init_kthread_work(&s->p[i].tx_work, sc16is7xx_tx_proc);
+ init_kthread_work(&s->p[i].reg_work, sc16is7xx_reg_proc);
/* Register port */
- uart_add_one_port(&s->uart, &s->p[i].port);
+ uart_add_one_port(&sc16is7xx_uart, &s->p[i].port);
/* Go to suspend mode */
sc16is7xx_power(&s->p[i].port, 0);
}
/* Setup interrupt */
- ret = devm_request_threaded_irq(dev, irq, NULL, sc16is7xx_ist,
- IRQF_ONESHOT | flags, dev_name(dev), s);
+ ret = devm_request_irq(dev, irq, sc16is7xx_irq,
+ flags, dev_name(dev), s);
if (!ret)
return 0;
- for (i = 0; i < s->uart.nr; i++)
- uart_remove_one_port(&s->uart, &s->p[i].port);
-
- mutex_destroy(&s->mutex);
+out_ports:
+ for (i--; i >= 0; i--) {
+ uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port);
+ clear_bit(s->p[i].port.line, &sc16is7xx_lines);
+ }
#ifdef CONFIG_GPIOLIB
if (devtype->nr_gpio)
gpiochip_remove(&s->gpio);
-out_uart:
+out_thread:
#endif
- uart_unregister_driver(&s->uart);
+ kthread_stop(s->kworker_task);
out_clk:
if (!IS_ERR(s->clk))
@@ -1169,15 +1265,15 @@ static int sc16is7xx_remove(struct device *dev)
gpiochip_remove(&s->gpio);
#endif
- for (i = 0; i < s->uart.nr; i++) {
- cancel_work_sync(&s->p[i].tx_work);
- cancel_work_sync(&s->p[i].md_work);
- uart_remove_one_port(&s->uart, &s->p[i].port);
+ for (i = 0; i < s->devtype->nr_uart; i++) {
+ uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port);
+ clear_bit(s->p[i].port.line, &sc16is7xx_lines);
sc16is7xx_power(&s->p[i].port, 0);
}
- mutex_destroy(&s->mutex);
- uart_unregister_driver(&s->uart);
+ flush_kthread_worker(&s->kworker);
+ kthread_stop(s->kworker_task);
+
if (!IS_ERR(s->clk))
clk_disable_unprepare(s->clk);
@@ -1204,10 +1300,81 @@ static struct regmap_config regcfg = {
.precious_reg = sc16is7xx_regmap_precious,
};
+#ifdef CONFIG_SERIAL_SC16IS7XX_SPI
+static int sc16is7xx_spi_probe(struct spi_device *spi)
+{
+ const struct sc16is7xx_devtype *devtype;
+ unsigned long flags = 0;
+ struct regmap *regmap;
+ int ret;
+
+ /* Setup SPI bus */
+ spi->bits_per_word = 8;
+ /* only supports mode 0 on SC16IS762 */
+ spi->mode = spi->mode ? : SPI_MODE_0;
+ spi->max_speed_hz = spi->max_speed_hz ? : 15000000;
+ ret = spi_setup(spi);
+ if (ret)
+ return ret;
+
+ if (spi->dev.of_node) {
+ const struct of_device_id *of_id =
+ of_match_device(sc16is7xx_dt_ids, &spi->dev);
+
+ if (!of_id)
+ return -ENODEV;
+
+ devtype = (struct sc16is7xx_devtype *)of_id->data;
+ } else {
+ const struct spi_device_id *id_entry = spi_get_device_id(spi);
+
+ devtype = (struct sc16is7xx_devtype *)id_entry->driver_data;
+ flags = IRQF_TRIGGER_FALLING;
+ }
+
+ regcfg.max_register = (0xf << SC16IS7XX_REG_SHIFT) |
+ (devtype->nr_uart - 1);
+ regmap = devm_regmap_init_spi(spi, &regcfg);
+
+ return sc16is7xx_probe(&spi->dev, devtype, regmap, spi->irq, flags);
+}
+
+static int sc16is7xx_spi_remove(struct spi_device *spi)
+{
+ return sc16is7xx_remove(&spi->dev);
+}
+
+static const struct spi_device_id sc16is7xx_spi_id_table[] = {
+ { "sc16is74x", (kernel_ulong_t)&sc16is74x_devtype, },
+ { "sc16is740", (kernel_ulong_t)&sc16is74x_devtype, },
+ { "sc16is741", (kernel_ulong_t)&sc16is74x_devtype, },
+ { "sc16is750", (kernel_ulong_t)&sc16is750_devtype, },
+ { "sc16is752", (kernel_ulong_t)&sc16is752_devtype, },
+ { "sc16is760", (kernel_ulong_t)&sc16is760_devtype, },
+ { "sc16is762", (kernel_ulong_t)&sc16is762_devtype, },
+ { }
+};
+
+MODULE_DEVICE_TABLE(spi, sc16is7xx_spi_id_table);
+
+static struct spi_driver sc16is7xx_spi_uart_driver = {
+ .driver = {
+ .name = SC16IS7XX_NAME,
+ .of_match_table = of_match_ptr(sc16is7xx_dt_ids),
+ },
+ .probe = sc16is7xx_spi_probe,
+ .remove = sc16is7xx_spi_remove,
+ .id_table = sc16is7xx_spi_id_table,
+};
+
+MODULE_ALIAS("spi:sc16is7xx");
+#endif
+
+#ifdef CONFIG_SERIAL_SC16IS7XX_I2C
static int sc16is7xx_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
- struct sc16is7xx_devtype *devtype;
+ const struct sc16is7xx_devtype *devtype;
unsigned long flags = 0;
struct regmap *regmap;
@@ -1215,6 +1382,9 @@ static int sc16is7xx_i2c_probe(struct i2c_client *i2c,
const struct of_device_id *of_id =
of_match_device(sc16is7xx_dt_ids, &i2c->dev);
+ if (!of_id)
+ return -ENODEV;
+
devtype = (struct sc16is7xx_devtype *)of_id->data;
} else {
devtype = (struct sc16is7xx_devtype *)id->driver_data;
@@ -1235,6 +1405,8 @@ static int sc16is7xx_i2c_remove(struct i2c_client *client)
static const struct i2c_device_id sc16is7xx_i2c_id_table[] = {
{ "sc16is74x", (kernel_ulong_t)&sc16is74x_devtype, },
+ { "sc16is740", (kernel_ulong_t)&sc16is74x_devtype, },
+ { "sc16is741", (kernel_ulong_t)&sc16is74x_devtype, },
{ "sc16is750", (kernel_ulong_t)&sc16is750_devtype, },
{ "sc16is752", (kernel_ulong_t)&sc16is752_devtype, },
{ "sc16is760", (kernel_ulong_t)&sc16is760_devtype, },
@@ -1246,15 +1418,56 @@ MODULE_DEVICE_TABLE(i2c, sc16is7xx_i2c_id_table);
static struct i2c_driver sc16is7xx_i2c_uart_driver = {
.driver = {
.name = SC16IS7XX_NAME,
- .owner = THIS_MODULE,
.of_match_table = of_match_ptr(sc16is7xx_dt_ids),
},
.probe = sc16is7xx_i2c_probe,
.remove = sc16is7xx_i2c_remove,
.id_table = sc16is7xx_i2c_id_table,
};
-module_i2c_driver(sc16is7xx_i2c_uart_driver);
-MODULE_ALIAS("i2c:sc16is7xx");
+
+#endif
+
+static int __init sc16is7xx_init(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&sc16is7xx_uart);
+ if (ret) {
+ pr_err("Registering UART driver failed\n");
+ return ret;
+ }
+
+#ifdef CONFIG_SERIAL_SC16IS7XX_I2C
+ ret = i2c_add_driver(&sc16is7xx_i2c_uart_driver);
+ if (ret < 0) {
+ pr_err("failed to init sc16is7xx i2c --> %d\n", ret);
+ return ret;
+ }
+#endif
+
+#ifdef CONFIG_SERIAL_SC16IS7XX_SPI
+ ret = spi_register_driver(&sc16is7xx_spi_uart_driver);
+ if (ret < 0) {
+ pr_err("failed to init sc16is7xx spi --> %d\n", ret);
+ return ret;
+ }
+#endif
+ return ret;
+}
+module_init(sc16is7xx_init);
+
+static void __exit sc16is7xx_exit(void)
+{
+#ifdef CONFIG_SERIAL_SC16IS7XX_I2C
+ i2c_del_driver(&sc16is7xx_i2c_uart_driver);
+#endif
+
+#ifdef CONFIG_SERIAL_SC16IS7XX_SPI
+ spi_unregister_driver(&sc16is7xx_spi_uart_driver);
+#endif
+ uart_unregister_driver(&sc16is7xx_uart);
+}
+module_exit(sc16is7xx_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jon Ringle <jringle@gridpoint.com>");
diff --git a/kernel/drivers/tty/serial/serial-tegra.c b/kernel/drivers/tty/serial/serial-tegra.c
index 1d5ea3964..1d6fc60ed 100644
--- a/kernel/drivers/tty/serial/serial-tegra.c
+++ b/kernel/drivers/tty/serial/serial-tegra.c
@@ -131,8 +131,8 @@ struct tegra_uart_port {
struct dma_async_tx_descriptor *rx_dma_desc;
dma_cookie_t tx_cookie;
dma_cookie_t rx_cookie;
- int tx_bytes_requested;
- int rx_bytes_requested;
+ unsigned int tx_bytes_requested;
+ unsigned int rx_bytes_requested;
};
static void tegra_uart_start_next_tx(struct tegra_uart_port *tup);
@@ -186,7 +186,6 @@ static void set_rts(struct tegra_uart_port *tup, bool active)
tegra_uart_write(tup, mcr, UART_MCR);
tup->mcr_shadow = mcr;
}
- return;
}
static void set_dtr(struct tegra_uart_port *tup, bool active)
@@ -202,7 +201,6 @@ static void set_dtr(struct tegra_uart_port *tup, bool active)
tegra_uart_write(tup, mcr, UART_MCR);
tup->mcr_shadow = mcr;
}
- return;
}
static void tegra_uart_set_mctrl(struct uart_port *u, unsigned int mctrl)
@@ -217,7 +215,6 @@ static void tegra_uart_set_mctrl(struct uart_port *u, unsigned int mctrl)
dtr_enable = !!(mctrl & TIOCM_DTR);
set_dtr(tup, dtr_enable);
- return;
}
static void tegra_uart_break_ctl(struct uart_port *u, int break_ctl)
@@ -234,6 +231,22 @@ static void tegra_uart_break_ctl(struct uart_port *u, int break_ctl)
tup->lcr_shadow = lcr;
}
+/**
+ * tegra_uart_wait_cycle_time: Wait for N UART clock periods
+ *
+ * @tup: Tegra serial port data structure.
+ * @cycles: Number of clock periods to wait.
+ *
+ * Tegra UARTs are clocked at 16X the baud/bit rate and hence the UART
+ * clock speed is 16X the current baud rate.
+ */
+static void tegra_uart_wait_cycle_time(struct tegra_uart_port *tup,
+ unsigned int cycles)
+{
+ if (tup->current_baud)
+ udelay(DIV_ROUND_UP(cycles * 1000000, tup->current_baud * 16));
+}
+
/* Wait for a symbol-time. */
static void tegra_uart_wait_sym_time(struct tegra_uart_port *tup,
unsigned int syms)
@@ -263,8 +276,12 @@ static void tegra_uart_fifo_reset(struct tegra_uart_port *tup, u8 fcr_bits)
/* Dummy read to ensure the write is posted */
tegra_uart_read(tup, UART_SCR);
- /* Wait for the flush to propagate. */
- tegra_uart_wait_sym_time(tup, 1);
+ /*
+ * For all tegra devices (up to t210), there is a hardware issue that
+ * requires software to wait for 32 UART clock periods for the flush
+ * to propagate, otherwise data could be lost.
+ */
+ tegra_uart_wait_cycle_time(tup, 32);
}
static int tegra_set_baudrate(struct tegra_uart_port *tup, unsigned int baud)
@@ -388,9 +405,9 @@ static void tegra_uart_tx_dma_complete(void *args)
struct circ_buf *xmit = &tup->uport.state->xmit;
struct dma_tx_state state;
unsigned long flags;
- int count;
+ unsigned int count;
- dmaengine_tx_status(tup->tx_dma_chan, tup->rx_cookie, &state);
+ dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state);
count = tup->tx_bytes_requested - state.residue;
async_tx_ack(tup->tx_dma_desc);
spin_lock_irqsave(&tup->uport.lock, flags);
@@ -480,7 +497,7 @@ static void tegra_uart_stop_tx(struct uart_port *u)
struct tegra_uart_port *tup = to_tegra_uport(u);
struct circ_buf *xmit = &tup->uport.state->xmit;
struct dma_tx_state state;
- int count;
+ unsigned int count;
if (tup->tx_in_progress != TEGRA_UART_TX_DMA)
return;
@@ -491,7 +508,6 @@ static void tegra_uart_stop_tx(struct uart_port *u)
async_tx_ack(tup->tx_dma_desc);
xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
tup->tx_in_progress = 0;
- return;
}
static void tegra_uart_handle_tx_pio(struct tegra_uart_port *tup)
@@ -503,7 +519,6 @@ static void tegra_uart_handle_tx_pio(struct tegra_uart_port *tup)
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&tup->uport);
tegra_uart_start_next_tx(tup);
- return;
}
static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup,
@@ -525,15 +540,18 @@ static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup,
if (!uart_handle_sysrq_char(&tup->uport, ch) && tty)
tty_insert_flip_char(tty, ch, flag);
} while (1);
-
- return;
}
static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
- struct tty_port *tty, int count)
+ struct tty_port *tty,
+ unsigned int count)
{
int copied;
+ /* If count is zero, then there is no data to be copied */
+ if (!count)
+ return;
+
tup->uport.icount.rx += count;
if (!tty) {
dev_err(tup->uport.dev, "No tty port\n");
@@ -551,71 +569,69 @@ static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
TEGRA_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE);
}
+static void tegra_uart_rx_buffer_push(struct tegra_uart_port *tup,
+ unsigned int residue)
+{
+ struct tty_port *port = &tup->uport.state->port;
+ struct tty_struct *tty = tty_port_tty_get(port);
+ unsigned int count;
+
+ async_tx_ack(tup->rx_dma_desc);
+ count = tup->rx_bytes_requested - residue;
+
+ /* If we are here, DMA is stopped */
+ tegra_uart_copy_rx_to_tty(tup, port, count);
+
+ tegra_uart_handle_rx_pio(tup, port);
+ if (tty) {
+ tty_flip_buffer_push(port);
+ tty_kref_put(tty);
+ }
+}
+
static void tegra_uart_rx_dma_complete(void *args)
{
struct tegra_uart_port *tup = args;
struct uart_port *u = &tup->uport;
- int count = tup->rx_bytes_requested;
- struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
- struct tty_port *port = &u->state->port;
unsigned long flags;
+ struct dma_tx_state state;
+ enum dma_status status;
- async_tx_ack(tup->rx_dma_desc);
spin_lock_irqsave(&u->lock, flags);
+ status = dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
+
+ if (status == DMA_IN_PROGRESS) {
+ dev_dbg(tup->uport.dev, "RX DMA is in progress\n");
+ goto done;
+ }
+
/* Deactivate flow control to stop sender */
if (tup->rts_active)
set_rts(tup, false);
- /* If we are here, DMA is stopped */
- if (count)
- tegra_uart_copy_rx_to_tty(tup, port, count);
-
- tegra_uart_handle_rx_pio(tup, port);
- if (tty) {
- spin_unlock_irqrestore(&u->lock, flags);
- tty_flip_buffer_push(port);
- spin_lock_irqsave(&u->lock, flags);
- tty_kref_put(tty);
- }
+ tegra_uart_rx_buffer_push(tup, 0);
tegra_uart_start_rx_dma(tup);
/* Activate flow control to start transfer */
if (tup->rts_active)
set_rts(tup, true);
+done:
spin_unlock_irqrestore(&u->lock, flags);
}
-static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup,
- unsigned long *flags)
+static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup)
{
struct dma_tx_state state;
- struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
- struct tty_port *port = &tup->uport.state->port;
- struct uart_port *u = &tup->uport;
- int count;
/* Deactivate flow control to stop sender */
if (tup->rts_active)
set_rts(tup, false);
dmaengine_terminate_all(tup->rx_dma_chan);
- dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
- async_tx_ack(tup->rx_dma_desc);
- count = tup->rx_bytes_requested - state.residue;
-
- /* If we are here, DMA is stopped */
- if (count)
- tegra_uart_copy_rx_to_tty(tup, port, count);
-
- tegra_uart_handle_rx_pio(tup, port);
- if (tty) {
- spin_unlock_irqrestore(&u->lock, *flags);
- tty_flip_buffer_push(port);
- spin_lock_irqsave(&u->lock, *flags);
- tty_kref_put(tty);
- }
+ dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
+ tegra_uart_rx_buffer_push(tup, state.residue);
tegra_uart_start_rx_dma(tup);
if (tup->rts_active)
@@ -663,7 +679,6 @@ static void tegra_uart_handle_modem_signal_change(struct uart_port *u)
/* Will start/stop_tx accordingly */
if (msr & UART_MSR_DCTS)
uart_handle_cts_change(&tup->uport, msr & UART_MSR_CTS);
- return;
}
static irqreturn_t tegra_uart_isr(int irq, void *data)
@@ -680,7 +695,7 @@ static irqreturn_t tegra_uart_isr(int irq, void *data)
iir = tegra_uart_read(tup, UART_IIR);
if (iir & UART_IIR_NO_INT) {
if (is_rx_int) {
- tegra_uart_handle_rx_dma(tup, &flags);
+ tegra_uart_handle_rx_dma(tup);
if (tup->rx_in_progress) {
ier = tup->ier_shadow;
ier |= (UART_IER_RLSI | UART_IER_RTOIE |
@@ -735,11 +750,8 @@ static irqreturn_t tegra_uart_isr(int irq, void *data)
static void tegra_uart_stop_rx(struct uart_port *u)
{
struct tegra_uart_port *tup = to_tegra_uport(u);
- struct tty_struct *tty;
- struct tty_port *port = &u->state->port;
struct dma_tx_state state;
unsigned long ier;
- int count;
if (tup->rts_active)
set_rts(tup, false);
@@ -747,8 +759,6 @@ static void tegra_uart_stop_rx(struct uart_port *u)
if (!tup->rx_in_progress)
return;
- tty = tty_port_tty_get(&tup->uport.state->port);
-
tegra_uart_wait_sym_time(tup, 1); /* wait a character interval */
ier = tup->ier_shadow;
@@ -757,21 +767,9 @@ static void tegra_uart_stop_rx(struct uart_port *u)
tup->ier_shadow = ier;
tegra_uart_write(tup, ier, UART_IER);
tup->rx_in_progress = 0;
- if (tup->rx_dma_chan) {
- dmaengine_terminate_all(tup->rx_dma_chan);
- dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
- async_tx_ack(tup->rx_dma_desc);
- count = tup->rx_bytes_requested - state.residue;
- tegra_uart_copy_rx_to_tty(tup, port, count);
- tegra_uart_handle_rx_pio(tup, port);
- } else {
- tegra_uart_handle_rx_pio(tup, port);
- }
- if (tty) {
- tty_flip_buffer_push(port);
- tty_kref_put(tty);
- }
- return;
+ dmaengine_terminate_all(tup->rx_dma_chan);
+ dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
+ tegra_uart_rx_buffer_push(tup, state.residue);
}
static void tegra_uart_hw_deinit(struct tegra_uart_port *tup)
@@ -865,6 +863,16 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
tup->fcr_shadow |= TEGRA_UART_TX_TRIG_16B;
tegra_uart_write(tup, tup->fcr_shadow, UART_FCR);
+ /* Dummy read to ensure the write is posted */
+ tegra_uart_read(tup, UART_SCR);
+
+ /*
+ * For all tegra devices (up to t210), there is a hardware issue that
+ * requires software to wait for 3 UART clock periods after enabling
+ * the TX fifo, otherwise data could be lost.
+ */
+ tegra_uart_wait_cycle_time(tup, 3);
+
/*
* Initialize the UART with default configuration
* (115200, N, 8, 1) so that the receive DMA buffer may be
@@ -905,6 +913,28 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
return 0;
}
+static void tegra_uart_dma_channel_free(struct tegra_uart_port *tup,
+ bool dma_to_memory)
+{
+ if (dma_to_memory) {
+ dmaengine_terminate_all(tup->rx_dma_chan);
+ dma_release_channel(tup->rx_dma_chan);
+ dma_free_coherent(tup->uport.dev, TEGRA_UART_RX_DMA_BUFFER_SIZE,
+ tup->rx_dma_buf_virt, tup->rx_dma_buf_phys);
+ tup->rx_dma_chan = NULL;
+ tup->rx_dma_buf_phys = 0;
+ tup->rx_dma_buf_virt = NULL;
+ } else {
+ dmaengine_terminate_all(tup->tx_dma_chan);
+ dma_release_channel(tup->tx_dma_chan);
+ dma_unmap_single(tup->uport.dev, tup->tx_dma_buf_phys,
+ UART_XMIT_SIZE, DMA_TO_DEVICE);
+ tup->tx_dma_chan = NULL;
+ tup->tx_dma_buf_phys = 0;
+ tup->tx_dma_buf_virt = NULL;
+ }
+}
+
static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
bool dma_to_memory)
{
@@ -933,67 +963,39 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
dma_release_channel(dma_chan);
return -ENOMEM;
}
+ dma_sconfig.src_addr = tup->uport.mapbase;
+ dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ dma_sconfig.src_maxburst = 4;
+ tup->rx_dma_chan = dma_chan;
+ tup->rx_dma_buf_virt = dma_buf;
+ tup->rx_dma_buf_phys = dma_phys;
} else {
dma_phys = dma_map_single(tup->uport.dev,
tup->uport.state->xmit.buf, UART_XMIT_SIZE,
DMA_TO_DEVICE);
+ if (dma_mapping_error(tup->uport.dev, dma_phys)) {
+ dev_err(tup->uport.dev, "dma_map_single tx failed\n");
+ dma_release_channel(dma_chan);
+ return -ENOMEM;
+ }
dma_buf = tup->uport.state->xmit.buf;
- }
-
- if (dma_to_memory) {
- dma_sconfig.src_addr = tup->uport.mapbase;
- dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
- dma_sconfig.src_maxburst = 4;
- } else {
dma_sconfig.dst_addr = tup->uport.mapbase;
dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
dma_sconfig.dst_maxburst = 16;
+ tup->tx_dma_chan = dma_chan;
+ tup->tx_dma_buf_virt = dma_buf;
+ tup->tx_dma_buf_phys = dma_phys;
}
ret = dmaengine_slave_config(dma_chan, &dma_sconfig);
if (ret < 0) {
dev_err(tup->uport.dev,
"Dma slave config failed, err = %d\n", ret);
- goto scrub;
+ tegra_uart_dma_channel_free(tup, dma_to_memory);
+ return ret;
}
- if (dma_to_memory) {
- tup->rx_dma_chan = dma_chan;
- tup->rx_dma_buf_virt = dma_buf;
- tup->rx_dma_buf_phys = dma_phys;
- } else {
- tup->tx_dma_chan = dma_chan;
- tup->tx_dma_buf_virt = dma_buf;
- tup->tx_dma_buf_phys = dma_phys;
- }
return 0;
-
-scrub:
- dma_release_channel(dma_chan);
- return ret;
-}
-
-static void tegra_uart_dma_channel_free(struct tegra_uart_port *tup,
- bool dma_to_memory)
-{
- struct dma_chan *dma_chan;
-
- if (dma_to_memory) {
- dma_free_coherent(tup->uport.dev, TEGRA_UART_RX_DMA_BUFFER_SIZE,
- tup->rx_dma_buf_virt, tup->rx_dma_buf_phys);
- dma_chan = tup->rx_dma_chan;
- tup->rx_dma_chan = NULL;
- tup->rx_dma_buf_phys = 0;
- tup->rx_dma_buf_virt = NULL;
- } else {
- dma_unmap_single(tup->uport.dev, tup->tx_dma_buf_phys,
- UART_XMIT_SIZE, DMA_TO_DEVICE);
- dma_chan = tup->tx_dma_chan;
- tup->tx_dma_chan = NULL;
- tup->tx_dma_buf_phys = 0;
- tup->tx_dma_buf_virt = NULL;
- }
- dma_release_channel(dma_chan);
}
static int tegra_uart_startup(struct uart_port *u)
@@ -1045,7 +1047,6 @@ static void tegra_uart_flush_buffer(struct uart_port *u)
tup->tx_bytes = 0;
if (tup->tx_dma_chan)
dmaengine_terminate_all(tup->tx_dma_chan);
- return;
}
static void tegra_uart_shutdown(struct uart_port *u)
@@ -1060,8 +1061,6 @@ static void tegra_uart_shutdown(struct uart_port *u)
tegra_uart_dma_channel_free(tup, true);
tegra_uart_dma_channel_free(tup, false);
free_irq(u->irq, tup);
-
- tegra_uart_flush_buffer(u);
}
static void tegra_uart_enable_ms(struct uart_port *u)
@@ -1187,7 +1186,6 @@ static void tegra_uart_set_termios(struct uart_port *u,
tegra_uart_read(tup, UART_IER);
spin_unlock_irqrestore(&u->lock, flags);
- return;
}
static const char *tegra_uart_type(struct uart_port *u)
diff --git a/kernel/drivers/tty/serial/serial_core.c b/kernel/drivers/tty/serial/serial_core.c
index ec540445b..def5199ca 100644
--- a/kernel/drivers/tty/serial/serial_core.c
+++ b/kernel/drivers/tty/serial/serial_core.c
@@ -335,18 +335,29 @@ unsigned int
uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
struct ktermios *old, unsigned int min, unsigned int max)
{
- unsigned int try, baud, altbaud = 38400;
+ unsigned int try;
+ unsigned int baud;
+ unsigned int altbaud;
int hung_up = 0;
upf_t flags = port->flags & UPF_SPD_MASK;
- if (flags == UPF_SPD_HI)
+ switch (flags) {
+ case UPF_SPD_HI:
altbaud = 57600;
- else if (flags == UPF_SPD_VHI)
+ break;
+ case UPF_SPD_VHI:
altbaud = 115200;
- else if (flags == UPF_SPD_SHI)
+ break;
+ case UPF_SPD_SHI:
altbaud = 230400;
- else if (flags == UPF_SPD_WARP)
+ break;
+ case UPF_SPD_WARP:
altbaud = 460800;
+ break;
+ default:
+ altbaud = 38400;
+ break;
+ }
for (try = 0; try < 2; try++) {
baud = tty_termios_baud_rate(termios);
@@ -894,12 +905,10 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
* need to rate-limit; it's CAP_SYS_ADMIN only.
*/
if (uport->flags & UPF_SPD_MASK) {
- char buf[64];
-
dev_notice(uport->dev,
"%s sets custom speed on %s. This is deprecated.\n",
current->comm,
- tty_name(port->tty, buf));
+ tty_name(port->tty));
}
uart_change_speed(tty, state, NULL);
}
@@ -1368,7 +1377,6 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
struct uart_state *state = tty->driver_data;
struct tty_port *port;
struct uart_port *uport;
- unsigned long flags;
if (!state) {
struct uart_driver *drv = tty->driver->driver_state;
@@ -1394,10 +1402,9 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
* disable the receive line status interrupts.
*/
if (port->flags & ASYNC_INITIALIZED) {
- unsigned long flags;
- spin_lock_irqsave(&uport->lock, flags);
+ spin_lock_irq(&uport->lock);
uport->ops->stop_rx(uport);
- spin_unlock_irqrestore(&uport->lock, flags);
+ spin_unlock_irq(&uport->lock);
/*
* Before we drop DTR, make sure the UART transmitter
* has completely drained; this is especially
@@ -1410,17 +1417,17 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
uart_shutdown(tty, state);
tty_port_tty_set(port, NULL);
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irq(&port->lock);
if (port->blocked_open) {
- spin_unlock_irqrestore(&port->lock, flags);
+ spin_unlock_irq(&port->lock);
if (port->close_delay)
msleep_interruptible(jiffies_to_msecs(port->close_delay));
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irq(&port->lock);
} else if (!uart_console(uport)) {
- spin_unlock_irqrestore(&port->lock, flags);
+ spin_unlock_irq(&port->lock);
uart_change_pm(state, UART_PM_STATE_OFF);
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irq(&port->lock);
}
/*
@@ -1428,9 +1435,8 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
*/
clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
clear_bit(ASYNCB_CLOSING, &port->flags);
- spin_unlock_irqrestore(&port->lock, flags);
+ spin_unlock_irq(&port->lock);
wake_up_interruptible(&port->open_wait);
- wake_up_interruptible(&port->close_wait);
mutex_unlock(&port->mutex);
@@ -1523,11 +1529,6 @@ static void uart_hangup(struct tty_struct *tty)
mutex_unlock(&port->mutex);
}
-static int uart_port_activate(struct tty_port *port, struct tty_struct *tty)
-{
- return 0;
-}
-
static void uart_port_shutdown(struct tty_port *port)
{
struct uart_state *state = container_of(port, struct uart_state, port);
@@ -1817,8 +1818,8 @@ uart_get_console(struct uart_port *ports, int nr, struct console *co)
* @options: ptr for <options> field; NULL if not present (out)
*
* Decodes earlycon kernel command line parameters of the form
- * earlycon=<name>,io|mmio|mmio32,<addr>,<options>
- * console=<name>,io|mmio|mmio32,<addr>,<options>
+ * earlycon=<name>,io|mmio|mmio32|mmio32be|mmio32native,<addr>,<options>
+ * console=<name>,io|mmio|mmio32|mmio32be|mmio32native,<addr>,<options>
*
* The optional form
* earlycon=<name>,0x<addr>,<options>
@@ -1836,6 +1837,13 @@ int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr,
} else if (strncmp(p, "mmio32,", 7) == 0) {
*iotype = UPIO_MEM32;
p += 7;
+ } else if (strncmp(p, "mmio32be,", 9) == 0) {
+ *iotype = UPIO_MEM32BE;
+ p += 9;
+ } else if (strncmp(p, "mmio32native,", 13) == 0) {
+ *iotype = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) ?
+ UPIO_MEM32BE : UPIO_MEM32;
+ p += 13;
} else if (strncmp(p, "io,", 3) == 0) {
*iotype = UPIO_PORT;
p += 3;
@@ -2367,8 +2375,6 @@ static const struct tty_operations uart_ops = {
};
static const struct tty_port_operations uart_port_ops = {
- .activate = uart_port_activate,
- .shutdown = uart_port_shutdown,
.carrier_raised = uart_carrier_raised,
.dtr_rts = uart_dtr_rts,
};
diff --git a/kernel/drivers/tty/serial/serial_ks8695.c b/kernel/drivers/tty/serial/serial_ks8695.c
index 5c79bdab9..b4decf878 100644
--- a/kernel/drivers/tty/serial/serial_ks8695.c
+++ b/kernel/drivers/tty/serial/serial_ks8695.c
@@ -328,7 +328,7 @@ static int ks8695uart_startup(struct uart_port *port)
{
int retval;
- set_irq_flags(KS8695_IRQ_UART_TX, IRQF_VALID | IRQF_NOAUTOEN);
+ irq_modify_status(KS8695_IRQ_UART_TX, IRQ_NOREQUEST, IRQ_NOAUTOEN);
tx_enable(port, 0);
rx_enable(port, 1);
ms_enable(port, 1);
diff --git a/kernel/drivers/tty/serial/serial_mctrl_gpio.c b/kernel/drivers/tty/serial/serial_mctrl_gpio.c
index 0ec756c62..3eb57eb53 100644
--- a/kernel/drivers/tty/serial/serial_mctrl_gpio.c
+++ b/kernel/drivers/tty/serial/serial_mctrl_gpio.c
@@ -12,18 +12,23 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
*/
#include <linux/err.h>
#include <linux/device.h>
+#include <linux/irq.h>
#include <linux/gpio/consumer.h>
#include <linux/termios.h>
+#include <linux/serial_core.h>
#include "serial_mctrl_gpio.h"
struct mctrl_gpios {
+ struct uart_port *port;
struct gpio_desc *gpio[UART_GPIO_MAX];
+ int irq[UART_GPIO_MAX];
+ unsigned int mctrl_prev;
+ bool mctrl_on;
};
static const struct {
@@ -49,13 +54,12 @@ void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl)
unsigned int count = 0;
for (i = 0; i < UART_GPIO_MAX; i++)
- if (!IS_ERR_OR_NULL(gpios->gpio[i]) &&
- mctrl_gpios_desc[i].dir_out) {
+ if (gpios->gpio[i] && mctrl_gpios_desc[i].dir_out) {
desc_array[count] = gpios->gpio[i];
value_array[count] = !!(mctrl & mctrl_gpios_desc[i].mctrl);
count++;
}
- gpiod_set_array(count, desc_array, value_array);
+ gpiod_set_array_value(count, desc_array, value_array);
}
EXPORT_SYMBOL_GPL(mctrl_gpio_set);
@@ -83,7 +87,7 @@ unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl)
}
EXPORT_SYMBOL_GPL(mctrl_gpio_get);
-struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx)
+struct mctrl_gpios *mctrl_gpio_init_noauto(struct device *dev, unsigned int idx)
{
struct mctrl_gpios *gpios;
enum mctrl_gpio_idx i;
@@ -111,15 +115,135 @@ struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx)
return gpios;
}
-EXPORT_SYMBOL_GPL(mctrl_gpio_init);
+EXPORT_SYMBOL_GPL(mctrl_gpio_init_noauto);
+
+#define MCTRL_ANY_DELTA (TIOCM_RI | TIOCM_DSR | TIOCM_CD | TIOCM_CTS)
+static irqreturn_t mctrl_gpio_irq_handle(int irq, void *context)
+{
+ struct mctrl_gpios *gpios = context;
+ struct uart_port *port = gpios->port;
+ u32 mctrl = gpios->mctrl_prev;
+ u32 mctrl_diff;
+
+ mctrl_gpio_get(gpios, &mctrl);
+
+ mctrl_diff = mctrl ^ gpios->mctrl_prev;
+ gpios->mctrl_prev = mctrl;
+
+ if (mctrl_diff & MCTRL_ANY_DELTA && port->state != NULL) {
+ if ((mctrl_diff & mctrl) & TIOCM_RI)
+ port->icount.rng++;
+
+ if ((mctrl_diff & mctrl) & TIOCM_DSR)
+ port->icount.dsr++;
+
+ if (mctrl_diff & TIOCM_CD)
+ uart_handle_dcd_change(port, mctrl & TIOCM_CD);
+
+ if (mctrl_diff & TIOCM_CTS)
+ uart_handle_cts_change(port, mctrl & TIOCM_CTS);
+
+ wake_up_interruptible(&port->state->port.delta_msr_wait);
+ }
+
+ return IRQ_HANDLED;
+}
+
+struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx)
+{
+ struct mctrl_gpios *gpios;
+ enum mctrl_gpio_idx i;
+
+ gpios = mctrl_gpio_init_noauto(port->dev, idx);
+ if (IS_ERR(gpios))
+ return gpios;
+
+ gpios->port = port;
+
+ for (i = 0; i < UART_GPIO_MAX; ++i) {
+ int ret;
+
+ if (!gpios->gpio[i] || mctrl_gpios_desc[i].dir_out)
+ continue;
+
+ ret = gpiod_to_irq(gpios->gpio[i]);
+ if (ret <= 0) {
+ dev_err(port->dev,
+ "failed to find corresponding irq for %s (idx=%d, err=%d)\n",
+ mctrl_gpios_desc[i].name, idx, ret);
+ return ERR_PTR(ret);
+ }
+ gpios->irq[i] = ret;
+
+ /* irqs should only be enabled in .enable_ms */
+ irq_set_status_flags(gpios->irq[i], IRQ_NOAUTOEN);
+
+ ret = devm_request_irq(port->dev, gpios->irq[i],
+ mctrl_gpio_irq_handle,
+ IRQ_TYPE_EDGE_BOTH, dev_name(port->dev),
+ gpios);
+ if (ret) {
+ /* alternatively implement polling */
+ dev_err(port->dev,
+ "failed to request irq for %s (idx=%d, err=%d)\n",
+ mctrl_gpios_desc[i].name, idx, ret);
+ return ERR_PTR(ret);
+ }
+ }
+
+ return gpios;
+}
void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios)
{
enum mctrl_gpio_idx i;
- for (i = 0; i < UART_GPIO_MAX; i++)
- if (!IS_ERR_OR_NULL(gpios->gpio[i]))
+ for (i = 0; i < UART_GPIO_MAX; i++) {
+ if (gpios->irq[i])
+ devm_free_irq(gpios->port->dev, gpios->irq[i], gpios);
+
+ if (gpios->gpio[i])
devm_gpiod_put(dev, gpios->gpio[i]);
+ }
devm_kfree(dev, gpios);
}
EXPORT_SYMBOL_GPL(mctrl_gpio_free);
+
+void mctrl_gpio_enable_ms(struct mctrl_gpios *gpios)
+{
+ enum mctrl_gpio_idx i;
+
+ /* .enable_ms may be called multiple times */
+ if (gpios->mctrl_on)
+ return;
+
+ gpios->mctrl_on = true;
+
+ /* get initial status of modem lines GPIOs */
+ mctrl_gpio_get(gpios, &gpios->mctrl_prev);
+
+ for (i = 0; i < UART_GPIO_MAX; ++i) {
+ if (!gpios->irq[i])
+ continue;
+
+ enable_irq(gpios->irq[i]);
+ }
+}
+EXPORT_SYMBOL_GPL(mctrl_gpio_enable_ms);
+
+void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios)
+{
+ enum mctrl_gpio_idx i;
+
+ if (!gpios->mctrl_on)
+ return;
+
+ gpios->mctrl_on = false;
+
+ for (i = 0; i < UART_GPIO_MAX; ++i) {
+ if (!gpios->irq[i])
+ continue;
+
+ disable_irq(gpios->irq[i]);
+ }
+}
diff --git a/kernel/drivers/tty/serial/serial_mctrl_gpio.h b/kernel/drivers/tty/serial/serial_mctrl_gpio.h
index 400ba0494..9716db283 100644
--- a/kernel/drivers/tty/serial/serial_mctrl_gpio.h
+++ b/kernel/drivers/tty/serial/serial_mctrl_gpio.h
@@ -22,6 +22,8 @@
#include <linux/device.h>
#include <linux/gpio/consumer.h>
+struct uart_port;
+
enum mctrl_gpio_idx {
UART_GPIO_CTS,
UART_GPIO_DSR,
@@ -60,12 +62,22 @@ struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios,
enum mctrl_gpio_idx gidx);
/*
+ * Request and set direction of modem control lines GPIOs and sets up irq
+ * handling.
+ * devm_* functions are used, so there's no need to call mctrl_gpio_free().
+ * Returns a pointer to the allocated mctrl structure if ok, -ENOMEM on
+ * allocation error.
+ */
+struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx);
+
+/*
* Request and set direction of modem control lines GPIOs.
* devm_* functions are used, so there's no need to call mctrl_gpio_free().
* Returns a pointer to the allocated mctrl structure if ok, -ENOMEM on
* allocation error.
*/
-struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx);
+struct mctrl_gpios *mctrl_gpio_init_noauto(struct device *dev,
+ unsigned int idx);
/*
* Free the mctrl_gpios structure.
@@ -74,6 +86,16 @@ struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx);
*/
void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios);
+/*
+ * Enable gpio interrupts to report status line changes.
+ */
+void mctrl_gpio_enable_ms(struct mctrl_gpios *gpios);
+
+/*
+ * Disable gpio interrupts to report status line changes.
+ */
+void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios);
+
#else /* GPIOLIB */
static inline
@@ -95,7 +117,13 @@ struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios,
}
static inline
-struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx)
+struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline
+struct mctrl_gpios *mctrl_gpio_init_noauto(struct device *dev, unsigned int idx)
{
return ERR_PTR(-ENOSYS);
}
@@ -105,6 +133,14 @@ void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios)
{
}
+static inline void mctrl_gpio_enable_ms(struct mctrl_gpios *gpios)
+{
+}
+
+static inline void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios)
+{
+}
+
#endif /* GPIOLIB */
#endif
diff --git a/kernel/drivers/tty/serial/sh-sci.c b/kernel/drivers/tty/serial/sh-sci.c
index e7d6566fa..51c7507b0 100644
--- a/kernel/drivers/tty/serial/sh-sci.c
+++ b/kernel/drivers/tty/serial/sh-sci.c
@@ -81,10 +81,12 @@ struct sci_port {
/* Platform configuration */
struct plat_sci_port *cfg;
- int overrun_bit;
+ unsigned int overrun_reg;
+ unsigned int overrun_mask;
unsigned int error_mask;
+ unsigned int error_clear;
unsigned int sampling_rate;
-
+ resource_size_t reg_size;
/* Break timer */
struct timer_list break_timer;
@@ -102,19 +104,15 @@ struct sci_port {
struct dma_chan *chan_rx;
#ifdef CONFIG_SERIAL_SH_SCI_DMA
- struct dma_async_tx_descriptor *desc_tx;
- struct dma_async_tx_descriptor *desc_rx[2];
dma_cookie_t cookie_tx;
dma_cookie_t cookie_rx[2];
dma_cookie_t active_rx;
- struct scatterlist sg_tx;
- unsigned int sg_len_tx;
+ dma_addr_t tx_dma_addr;
+ unsigned int tx_dma_len;
struct scatterlist sg_rx[2];
+ void *rx_buf[2];
size_t buf_len_rx;
- struct sh_dmae_slave param_tx;
- struct sh_dmae_slave param_rx;
struct work_struct work_tx;
- struct work_struct work_rx;
struct timer_list rx_timer;
unsigned int rx_timeout;
#endif
@@ -122,11 +120,6 @@ struct sci_port {
struct notifier_block freq_transition;
};
-/* Function prototypes */
-static void sci_start_tx(struct uart_port *port);
-static void sci_stop_tx(struct uart_port *port);
-static void sci_start_rx(struct uart_port *port);
-
#define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS
static struct sci_port sci_ports[SCI_NPORTS];
@@ -145,7 +138,7 @@ struct plat_sci_reg {
/* Helper for invalidating specific entries of an inherited map. */
#define sci_reg_invalid { .offset = 0, .size = 0 }
-static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
+static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCIx_PROBE_REGTYPE] = {
[0 ... SCIx_NR_REGS - 1] = sci_reg_invalid,
},
@@ -168,6 +161,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = sci_reg_invalid,
[SCLSR] = sci_reg_invalid,
[HSSRR] = sci_reg_invalid,
+ [SCPCR] = sci_reg_invalid,
+ [SCPDR] = sci_reg_invalid,
},
/*
@@ -188,6 +183,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = sci_reg_invalid,
[SCLSR] = sci_reg_invalid,
[HSSRR] = sci_reg_invalid,
+ [SCPCR] = sci_reg_invalid,
+ [SCPDR] = sci_reg_invalid,
},
/*
@@ -207,6 +204,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = sci_reg_invalid,
[SCLSR] = sci_reg_invalid,
[HSSRR] = sci_reg_invalid,
+ [SCPCR] = { 0x30, 16 },
+ [SCPDR] = { 0x34, 16 },
},
/*
@@ -226,6 +225,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = sci_reg_invalid,
[SCLSR] = sci_reg_invalid,
[HSSRR] = sci_reg_invalid,
+ [SCPCR] = { 0x30, 16 },
+ [SCPDR] = { 0x34, 16 },
},
/*
@@ -246,6 +247,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = { 0x20, 16 },
[SCLSR] = { 0x24, 16 },
[HSSRR] = sci_reg_invalid,
+ [SCPCR] = sci_reg_invalid,
+ [SCPDR] = sci_reg_invalid,
},
/*
@@ -265,6 +268,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = sci_reg_invalid,
[SCLSR] = sci_reg_invalid,
[HSSRR] = sci_reg_invalid,
+ [SCPCR] = sci_reg_invalid,
+ [SCPDR] = sci_reg_invalid,
},
/*
@@ -284,6 +289,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = { 0x20, 16 },
[SCLSR] = { 0x24, 16 },
[HSSRR] = sci_reg_invalid,
+ [SCPCR] = sci_reg_invalid,
+ [SCPDR] = sci_reg_invalid,
},
/*
@@ -303,6 +310,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = { 0x20, 16 },
[SCLSR] = { 0x24, 16 },
[HSSRR] = { 0x40, 16 },
+ [SCPCR] = sci_reg_invalid,
+ [SCPDR] = sci_reg_invalid,
},
/*
@@ -323,6 +332,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = sci_reg_invalid,
[SCLSR] = { 0x24, 16 },
[HSSRR] = sci_reg_invalid,
+ [SCPCR] = sci_reg_invalid,
+ [SCPDR] = sci_reg_invalid,
},
/*
@@ -343,6 +354,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = { 0x24, 16 },
[SCLSR] = { 0x28, 16 },
[HSSRR] = sci_reg_invalid,
+ [SCPCR] = sci_reg_invalid,
+ [SCPDR] = sci_reg_invalid,
},
/*
@@ -363,6 +376,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
[SCSPTR] = sci_reg_invalid,
[SCLSR] = sci_reg_invalid,
[HSSRR] = sci_reg_invalid,
+ [SCPCR] = sci_reg_invalid,
+ [SCPDR] = sci_reg_invalid,
},
};
@@ -376,7 +391,7 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
*/
static unsigned int sci_serial_in(struct uart_port *p, int offset)
{
- struct plat_sci_reg *reg = sci_getreg(p, offset);
+ const struct plat_sci_reg *reg = sci_getreg(p, offset);
if (reg->size == 8)
return ioread8(p->membase + (reg->offset << p->regshift));
@@ -390,7 +405,7 @@ static unsigned int sci_serial_in(struct uart_port *p, int offset)
static void sci_serial_out(struct uart_port *p, int offset, int value)
{
- struct plat_sci_reg *reg = sci_getreg(p, offset);
+ const struct plat_sci_reg *reg = sci_getreg(p, offset);
if (reg->size == 8)
iowrite8(value, p->membase + (reg->offset << p->regshift));
@@ -466,6 +481,105 @@ static void sci_port_disable(struct sci_port *sci_port)
pm_runtime_put_sync(sci_port->port.dev);
}
+static inline unsigned long port_rx_irq_mask(struct uart_port *port)
+{
+ /*
+ * Not all ports (such as SCIFA) will support REIE. Rather than
+ * special-casing the port type, we check the port initialization
+ * IRQ enable mask to see whether the IRQ is desired at all. If
+ * it's unset, it's logically inferred that there's no point in
+ * testing for it.
+ */
+ return SCSCR_RIE | (to_sci_port(port)->cfg->scscr & SCSCR_REIE);
+}
+
+static void sci_start_tx(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+ unsigned short ctrl;
+
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ u16 new, scr = serial_port_in(port, SCSCR);
+ if (s->chan_tx)
+ new = scr | SCSCR_TDRQE;
+ else
+ new = scr & ~SCSCR_TDRQE;
+ if (new != scr)
+ serial_port_out(port, SCSCR, new);
+ }
+
+ if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
+ dma_submit_error(s->cookie_tx)) {
+ s->cookie_tx = 0;
+ schedule_work(&s->work_tx);
+ }
+#endif
+
+ if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
+ ctrl = serial_port_in(port, SCSCR);
+ serial_port_out(port, SCSCR, ctrl | SCSCR_TIE);
+ }
+}
+
+static void sci_stop_tx(struct uart_port *port)
+{
+ unsigned short ctrl;
+
+ /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
+ ctrl = serial_port_in(port, SCSCR);
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ ctrl &= ~SCSCR_TDRQE;
+
+ ctrl &= ~SCSCR_TIE;
+
+ serial_port_out(port, SCSCR, ctrl);
+}
+
+static void sci_start_rx(struct uart_port *port)
+{
+ unsigned short ctrl;
+
+ ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port);
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ ctrl &= ~SCSCR_RDRQE;
+
+ serial_port_out(port, SCSCR, ctrl);
+}
+
+static void sci_stop_rx(struct uart_port *port)
+{
+ unsigned short ctrl;
+
+ ctrl = serial_port_in(port, SCSCR);
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ ctrl &= ~SCSCR_RDRQE;
+
+ ctrl &= ~port_rx_irq_mask(port);
+
+ serial_port_out(port, SCSCR, ctrl);
+}
+
+static void sci_clear_SCxSR(struct uart_port *port, unsigned int mask)
+{
+ if (port->type == PORT_SCI) {
+ /* Just store the mask */
+ serial_port_out(port, SCxSR, mask);
+ } else if (to_sci_port(port)->overrun_mask == SCIFA_ORER) {
+ /* SCIFA/SCIFB and SCIF on SH7705/SH7720/SH7721 */
+ /* Only clear the status bits we want to clear */
+ serial_port_out(port, SCxSR,
+ serial_port_in(port, SCxSR) & mask);
+ } else {
+ /* Store the mask, clear parity/framing errors */
+ serial_port_out(port, SCxSR, mask & ~(SCIF_FERC | SCIF_PERC));
+ }
+}
+
#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
#ifdef CONFIG_CONSOLE_POLL
@@ -477,7 +591,7 @@ static int sci_poll_get_char(struct uart_port *port)
do {
status = serial_port_in(port, SCxSR);
if (status & SCxSR_ERRORS(port)) {
- serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
+ sci_clear_SCxSR(port, SCxSR_ERROR_CLEAR(port));
continue;
}
break;
@@ -490,7 +604,7 @@ static int sci_poll_get_char(struct uart_port *port)
/* Dummy read */
serial_port_in(port, SCxSR);
- serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
return c;
}
@@ -505,14 +619,14 @@ static void sci_poll_put_char(struct uart_port *port, unsigned char c)
} while (!(status & SCxSR_TDxE(port)));
serial_port_out(port, SCxTDR, c);
- serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
+ sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
}
#endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
static void sci_init_pins(struct uart_port *port, unsigned int cflag)
{
struct sci_port *s = to_sci_port(port);
- struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR;
+ const struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR;
/*
* Use port-specific handler if provided.
@@ -542,7 +656,7 @@ static void sci_init_pins(struct uart_port *port, unsigned int cflag)
static int sci_txfill(struct uart_port *port)
{
- struct plat_sci_reg *reg;
+ const struct plat_sci_reg *reg;
reg = sci_getreg(port, SCTFDR);
if (reg->size)
@@ -562,7 +676,7 @@ static int sci_txroom(struct uart_port *port)
static int sci_rxfill(struct uart_port *port)
{
- struct plat_sci_reg *reg;
+ const struct plat_sci_reg *reg;
reg = sci_getreg(port, SCRFDR);
if (reg->size)
@@ -632,7 +746,7 @@ static void sci_transmit_chars(struct uart_port *port)
port->icount.tx++;
} while (--count > 0);
- serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+ sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port));
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
@@ -643,7 +757,7 @@ static void sci_transmit_chars(struct uart_port *port)
if (port->type != PORT_SCI) {
serial_port_in(port, SCxSR); /* Dummy read */
- serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
+ sci_clear_SCxSR(port, SCxSR_TDxE_CLEAR(port));
}
ctrl |= SCSCR_TIE;
@@ -727,7 +841,7 @@ static void sci_receive_chars(struct uart_port *port)
}
serial_port_in(port, SCxSR); /* dummy read */
- serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
copied += count;
port->icount.rx += count;
@@ -738,7 +852,7 @@ static void sci_receive_chars(struct uart_port *port)
tty_flip_buffer_push(tport);
} else {
serial_port_in(port, SCxSR); /* dummy read */
- serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
}
}
@@ -781,7 +895,7 @@ static int sci_handle_errors(struct uart_port *port)
struct sci_port *s = to_sci_port(port);
/* Handle overruns */
- if (status & (1 << s->overrun_bit)) {
+ if (status & s->overrun_mask) {
port->icount.overrun++;
/* overrun error */
@@ -843,33 +957,18 @@ static int sci_handle_fifo_overrun(struct uart_port *port)
{
struct tty_port *tport = &port->state->port;
struct sci_port *s = to_sci_port(port);
- struct plat_sci_reg *reg;
- int copied = 0, offset;
- u16 status, bit;
-
- switch (port->type) {
- case PORT_SCIF:
- case PORT_HSCIF:
- offset = SCLSR;
- break;
- case PORT_SCIFA:
- case PORT_SCIFB:
- offset = SCxSR;
- break;
- default:
- return 0;
- }
+ const struct plat_sci_reg *reg;
+ int copied = 0;
+ u16 status;
- reg = sci_getreg(port, offset);
+ reg = sci_getreg(port, s->overrun_reg);
if (!reg->size)
return 0;
- status = serial_port_in(port, offset);
- bit = 1 << s->overrun_bit;
-
- if (status & bit) {
- status &= ~bit;
- serial_port_out(port, offset, status);
+ status = serial_port_in(port, s->overrun_reg);
+ if (status & s->overrun_mask) {
+ status &= ~s->overrun_mask;
+ serial_port_out(port, s->overrun_reg, status);
port->icount.overrun++;
@@ -916,6 +1015,460 @@ static int sci_handle_breaks(struct uart_port *port)
return copied;
}
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+static void sci_dma_tx_complete(void *arg)
+{
+ struct sci_port *s = arg;
+ struct uart_port *port = &s->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ unsigned long flags;
+
+ dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ xmit->tail += s->tx_dma_len;
+ xmit->tail &= UART_XMIT_SIZE - 1;
+
+ port->icount.tx += s->tx_dma_len;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (!uart_circ_empty(xmit)) {
+ s->cookie_tx = 0;
+ schedule_work(&s->work_tx);
+ } else {
+ s->cookie_tx = -EINVAL;
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ u16 ctrl = serial_port_in(port, SCSCR);
+ serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE);
+ }
+ }
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* Locking: called with port lock held */
+static int sci_dma_rx_push(struct sci_port *s, void *buf, size_t count)
+{
+ struct uart_port *port = &s->port;
+ struct tty_port *tport = &port->state->port;
+ int copied;
+
+ copied = tty_insert_flip_string(tport, buf, count);
+ if (copied < count) {
+ dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n",
+ count - copied);
+ port->icount.buf_overrun++;
+ }
+
+ port->icount.rx += copied;
+
+ return copied;
+}
+
+static int sci_dma_rx_find_active(struct sci_port *s)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(s->cookie_rx); i++)
+ if (s->active_rx == s->cookie_rx[i])
+ return i;
+
+ dev_err(s->port.dev, "%s: Rx cookie %d not found!\n", __func__,
+ s->active_rx);
+ return -1;
+}
+
+static void sci_rx_dma_release(struct sci_port *s, bool enable_pio)
+{
+ struct dma_chan *chan = s->chan_rx;
+ struct uart_port *port = &s->port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ s->chan_rx = NULL;
+ s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL;
+ spin_unlock_irqrestore(&port->lock, flags);
+ dmaengine_terminate_all(chan);
+ dma_free_coherent(chan->device->dev, s->buf_len_rx * 2, s->rx_buf[0],
+ sg_dma_address(&s->sg_rx[0]));
+ dma_release_channel(chan);
+ if (enable_pio)
+ sci_start_rx(port);
+}
+
+static void sci_dma_rx_complete(void *arg)
+{
+ struct sci_port *s = arg;
+ struct dma_chan *chan = s->chan_rx;
+ struct uart_port *port = &s->port;
+ struct dma_async_tx_descriptor *desc;
+ unsigned long flags;
+ int active, count = 0;
+
+ dev_dbg(port->dev, "%s(%d) active cookie %d\n", __func__, port->line,
+ s->active_rx);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ active = sci_dma_rx_find_active(s);
+ if (active >= 0)
+ count = sci_dma_rx_push(s, s->rx_buf[active], s->buf_len_rx);
+
+ mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
+
+ if (count)
+ tty_flip_buffer_push(&port->state->port);
+
+ desc = dmaengine_prep_slave_sg(s->chan_rx, &s->sg_rx[active], 1,
+ DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc)
+ goto fail;
+
+ desc->callback = sci_dma_rx_complete;
+ desc->callback_param = s;
+ s->cookie_rx[active] = dmaengine_submit(desc);
+ if (dma_submit_error(s->cookie_rx[active]))
+ goto fail;
+
+ s->active_rx = s->cookie_rx[!active];
+
+ dma_async_issue_pending(chan);
+
+ dev_dbg(port->dev, "%s: cookie %d #%d, new active cookie %d\n",
+ __func__, s->cookie_rx[active], active, s->active_rx);
+ spin_unlock_irqrestore(&port->lock, flags);
+ return;
+
+fail:
+ spin_unlock_irqrestore(&port->lock, flags);
+ dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n");
+ sci_rx_dma_release(s, true);
+}
+
+static void sci_tx_dma_release(struct sci_port *s, bool enable_pio)
+{
+ struct dma_chan *chan = s->chan_tx;
+ struct uart_port *port = &s->port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ s->chan_tx = NULL;
+ s->cookie_tx = -EINVAL;
+ spin_unlock_irqrestore(&port->lock, flags);
+ dmaengine_terminate_all(chan);
+ dma_unmap_single(chan->device->dev, s->tx_dma_addr, UART_XMIT_SIZE,
+ DMA_TO_DEVICE);
+ dma_release_channel(chan);
+ if (enable_pio)
+ sci_start_tx(port);
+}
+
+static void sci_submit_rx(struct sci_port *s)
+{
+ struct dma_chan *chan = s->chan_rx;
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ struct scatterlist *sg = &s->sg_rx[i];
+ struct dma_async_tx_descriptor *desc;
+
+ desc = dmaengine_prep_slave_sg(chan,
+ sg, 1, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc)
+ goto fail;
+
+ desc->callback = sci_dma_rx_complete;
+ desc->callback_param = s;
+ s->cookie_rx[i] = dmaengine_submit(desc);
+ if (dma_submit_error(s->cookie_rx[i]))
+ goto fail;
+
+ dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__,
+ s->cookie_rx[i], i);
+ }
+
+ s->active_rx = s->cookie_rx[0];
+
+ dma_async_issue_pending(chan);
+ return;
+
+fail:
+ if (i)
+ dmaengine_terminate_all(chan);
+ for (i = 0; i < 2; i++)
+ s->cookie_rx[i] = -EINVAL;
+ s->active_rx = -EINVAL;
+ dev_warn(s->port.dev, "Failed to re-start Rx DMA, using PIO\n");
+ sci_rx_dma_release(s, true);
+}
+
+static void work_fn_tx(struct work_struct *work)
+{
+ struct sci_port *s = container_of(work, struct sci_port, work_tx);
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *chan = s->chan_tx;
+ struct uart_port *port = &s->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ dma_addr_t buf;
+
+ /*
+ * DMA is idle now.
+ * Port xmit buffer is already mapped, and it is one page... Just adjust
+ * offsets and lengths. Since it is a circular buffer, we have to
+ * transmit till the end, and then the rest. Take the port lock to get a
+ * consistent xmit buffer state.
+ */
+ spin_lock_irq(&port->lock);
+ buf = s->tx_dma_addr + (xmit->tail & (UART_XMIT_SIZE - 1));
+ s->tx_dma_len = min_t(unsigned int,
+ CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
+ CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE));
+ spin_unlock_irq(&port->lock);
+
+ desc = dmaengine_prep_slave_single(chan, buf, s->tx_dma_len,
+ DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc) {
+ dev_warn(port->dev, "Failed preparing Tx DMA descriptor\n");
+ /* switch to PIO */
+ sci_tx_dma_release(s, true);
+ return;
+ }
+
+ dma_sync_single_for_device(chan->device->dev, buf, s->tx_dma_len,
+ DMA_TO_DEVICE);
+
+ spin_lock_irq(&port->lock);
+ desc->callback = sci_dma_tx_complete;
+ desc->callback_param = s;
+ spin_unlock_irq(&port->lock);
+ s->cookie_tx = dmaengine_submit(desc);
+ if (dma_submit_error(s->cookie_tx)) {
+ dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n");
+ /* switch to PIO */
+ sci_tx_dma_release(s, true);
+ return;
+ }
+
+ dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n",
+ __func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
+
+ dma_async_issue_pending(chan);
+}
+
+static void rx_timer_fn(unsigned long arg)
+{
+ struct sci_port *s = (struct sci_port *)arg;
+ struct dma_chan *chan = s->chan_rx;
+ struct uart_port *port = &s->port;
+ struct dma_tx_state state;
+ enum dma_status status;
+ unsigned long flags;
+ unsigned int read;
+ int active, count;
+ u16 scr;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ dev_dbg(port->dev, "DMA Rx timed out\n");
+
+ active = sci_dma_rx_find_active(s);
+ if (active < 0) {
+ spin_unlock_irqrestore(&port->lock, flags);
+ return;
+ }
+
+ status = dmaengine_tx_status(s->chan_rx, s->active_rx, &state);
+ if (status == DMA_COMPLETE) {
+ dev_dbg(port->dev, "Cookie %d #%d has already completed\n",
+ s->active_rx, active);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ /* Let packet complete handler take care of the packet */
+ return;
+ }
+
+ dmaengine_pause(chan);
+
+ /*
+ * sometimes DMA transfer doesn't stop even if it is stopped and
+ * data keeps on coming until transaction is complete so check
+ * for DMA_COMPLETE again
+ * Let packet complete handler take care of the packet
+ */
+ status = dmaengine_tx_status(s->chan_rx, s->active_rx, &state);
+ if (status == DMA_COMPLETE) {
+ spin_unlock_irqrestore(&port->lock, flags);
+ dev_dbg(port->dev, "Transaction complete after DMA engine was stopped");
+ return;
+ }
+
+ /* Handle incomplete DMA receive */
+ dmaengine_terminate_all(s->chan_rx);
+ read = sg_dma_len(&s->sg_rx[active]) - state.residue;
+ dev_dbg(port->dev, "Read %u bytes with cookie %d\n", read,
+ s->active_rx);
+
+ if (read) {
+ count = sci_dma_rx_push(s, s->rx_buf[active], read);
+ if (count)
+ tty_flip_buffer_push(&port->state->port);
+ }
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ sci_submit_rx(s);
+
+ /* Direct new serial port interrupts back to CPU */
+ scr = serial_port_in(port, SCSCR);
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ scr &= ~SCSCR_RDRQE;
+ enable_irq(s->irqs[SCIx_RXI_IRQ]);
+ }
+ serial_port_out(port, SCSCR, scr | SCSCR_RIE);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static struct dma_chan *sci_request_dma_chan(struct uart_port *port,
+ enum dma_transfer_direction dir,
+ unsigned int id)
+{
+ dma_cap_mask_t mask;
+ struct dma_chan *chan;
+ struct dma_slave_config cfg;
+ int ret;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ chan = dma_request_slave_channel_compat(mask, shdma_chan_filter,
+ (void *)(unsigned long)id, port->dev,
+ dir == DMA_MEM_TO_DEV ? "tx" : "rx");
+ if (!chan) {
+ dev_warn(port->dev,
+ "dma_request_slave_channel_compat failed\n");
+ return NULL;
+ }
+
+ memset(&cfg, 0, sizeof(cfg));
+ cfg.direction = dir;
+ if (dir == DMA_MEM_TO_DEV) {
+ cfg.dst_addr = port->mapbase +
+ (sci_getreg(port, SCxTDR)->offset << port->regshift);
+ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ } else {
+ cfg.src_addr = port->mapbase +
+ (sci_getreg(port, SCxRDR)->offset << port->regshift);
+ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+ }
+
+ ret = dmaengine_slave_config(chan, &cfg);
+ if (ret) {
+ dev_warn(port->dev, "dmaengine_slave_config failed %d\n", ret);
+ dma_release_channel(chan);
+ return NULL;
+ }
+
+ return chan;
+}
+
+static void sci_request_dma(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+ struct dma_chan *chan;
+
+ dev_dbg(port->dev, "%s: port %d\n", __func__, port->line);
+
+ if (!port->dev->of_node &&
+ (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0))
+ return;
+
+ s->cookie_tx = -EINVAL;
+ chan = sci_request_dma_chan(port, DMA_MEM_TO_DEV, s->cfg->dma_slave_tx);
+ dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan);
+ if (chan) {
+ s->chan_tx = chan;
+ /* UART circular tx buffer is an aligned page. */
+ s->tx_dma_addr = dma_map_single(chan->device->dev,
+ port->state->xmit.buf,
+ UART_XMIT_SIZE,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(chan->device->dev, s->tx_dma_addr)) {
+ dev_warn(port->dev, "Failed mapping Tx DMA descriptor\n");
+ dma_release_channel(chan);
+ s->chan_tx = NULL;
+ } else {
+ dev_dbg(port->dev, "%s: mapped %lu@%p to %pad\n",
+ __func__, UART_XMIT_SIZE,
+ port->state->xmit.buf, &s->tx_dma_addr);
+ }
+
+ INIT_WORK(&s->work_tx, work_fn_tx);
+ }
+
+ chan = sci_request_dma_chan(port, DMA_DEV_TO_MEM, s->cfg->dma_slave_rx);
+ dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan);
+ if (chan) {
+ unsigned int i;
+ dma_addr_t dma;
+ void *buf;
+
+ s->chan_rx = chan;
+
+ s->buf_len_rx = 2 * max_t(size_t, 16, port->fifosize);
+ buf = dma_alloc_coherent(chan->device->dev, s->buf_len_rx * 2,
+ &dma, GFP_KERNEL);
+ if (!buf) {
+ dev_warn(port->dev,
+ "Failed to allocate Rx dma buffer, using PIO\n");
+ dma_release_channel(chan);
+ s->chan_rx = NULL;
+ return;
+ }
+
+ for (i = 0; i < 2; i++) {
+ struct scatterlist *sg = &s->sg_rx[i];
+
+ sg_init_table(sg, 1);
+ s->rx_buf[i] = buf;
+ sg_dma_address(sg) = dma;
+ sg_dma_len(sg) = s->buf_len_rx;
+
+ buf += s->buf_len_rx;
+ dma += s->buf_len_rx;
+ }
+
+ setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s);
+
+ if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
+ sci_submit_rx(s);
+ }
+}
+
+static void sci_free_dma(struct uart_port *port)
+{
+ struct sci_port *s = to_sci_port(port);
+
+ if (s->chan_tx)
+ sci_tx_dma_release(s, false);
+ if (s->chan_rx)
+ sci_rx_dma_release(s, false);
+}
+#else
+static inline void sci_request_dma(struct uart_port *port)
+{
+}
+
+static inline void sci_free_dma(struct uart_port *port)
+{
+}
+#endif
+
static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
{
#ifdef CONFIG_SERIAL_SH_SCI_DMA
@@ -932,10 +1485,12 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
scr |= SCSCR_RDRQE;
} else {
scr &= ~SCSCR_RIE;
+ sci_submit_rx(s);
}
serial_port_out(port, SCSCR, scr);
/* Clear current interrupt */
- serial_port_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port)));
+ serial_port_out(port, SCxSR,
+ ssr & ~(SCIF_DR | SCxSR_RDxF(port)));
dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n",
jiffies, s->rx_timeout);
mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
@@ -968,23 +1523,26 @@ static irqreturn_t sci_tx_interrupt(int irq, void *ptr)
static irqreturn_t sci_er_interrupt(int irq, void *ptr)
{
struct uart_port *port = ptr;
+ struct sci_port *s = to_sci_port(port);
/* Handle errors */
if (port->type == PORT_SCI) {
if (sci_handle_errors(port)) {
/* discard character in rx buffer */
serial_port_in(port, SCxSR);
- serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
+ sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port));
}
} else {
sci_handle_fifo_overrun(port);
- sci_rx_interrupt(irq, ptr);
+ if (!s->chan_rx)
+ sci_receive_chars(ptr);
}
- serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
+ sci_clear_SCxSR(port, SCxSR_ERROR_CLEAR(port));
/* Kick the transmission */
- sci_tx_interrupt(irq, ptr);
+ if (!s->chan_tx)
+ sci_tx_interrupt(irq, ptr);
return IRQ_HANDLED;
}
@@ -995,23 +1553,11 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr)
/* Handle BREAKs */
sci_handle_breaks(port);
- serial_port_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
+ sci_clear_SCxSR(port, SCxSR_BREAK_CLEAR(port));
return IRQ_HANDLED;
}
-static inline unsigned long port_rx_irq_mask(struct uart_port *port)
-{
- /*
- * Not all ports (such as SCIFA) will support REIE. Rather than
- * special-casing the port type, we check the port initialization
- * IRQ enable mask to see whether the IRQ is desired at all. If
- * it's unset, it's logically inferred that there's no point in
- * testing for it.
- */
- return SCSCR_RIE | (to_sci_port(port)->cfg->scscr & SCSCR_REIE);
-}
-
static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
{
unsigned short ssr_status, scr_status, err_enabled, orer_status = 0;
@@ -1021,15 +1567,11 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
ssr_status = serial_port_in(port, SCxSR);
scr_status = serial_port_in(port, SCSCR);
- switch (port->type) {
- case PORT_SCIF:
- case PORT_HSCIF:
- orer_status = serial_port_in(port, SCLSR);
- break;
- case PORT_SCIFA:
- case PORT_SCIFB:
+ if (s->overrun_reg == SCxSR)
orer_status = ssr_status;
- break;
+ else {
+ if (sci_getreg(port, s->overrun_reg)->size)
+ orer_status = serial_port_in(port, s->overrun_reg);
}
err_enabled = scr_status & port_rx_irq_mask(port);
@@ -1044,11 +1586,8 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
* DR flags
*/
if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) &&
- (scr_status & SCSCR_RIE)) {
- if (port->type == PORT_SCIF || port->type == PORT_HSCIF)
- sci_handle_fifo_overrun(port);
+ (scr_status & SCSCR_RIE))
ret = sci_rx_interrupt(irq, ptr);
- }
/* Error Interrupt */
if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
@@ -1059,8 +1598,10 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
ret = sci_br_interrupt(irq, ptr);
/* Overrun Interrupt */
- if (orer_status & (1 << s->overrun_bit))
+ if (orer_status & s->overrun_mask) {
sci_handle_fifo_overrun(port);
+ ret = IRQ_HANDLED;
+ }
return ret;
}
@@ -1088,7 +1629,7 @@ static int sci_notifier(struct notifier_block *self,
return NOTIFY_OK;
}
-static struct sci_irq_desc {
+static const struct sci_irq_desc {
const char *desc;
irq_handler_t handler;
} sci_irq_desc[] = {
@@ -1130,7 +1671,7 @@ static int sci_request_irq(struct sci_port *port)
int i, j, ret = 0;
for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) {
- struct sci_irq_desc *desc;
+ const struct sci_irq_desc *desc;
int irq;
if (SCIx_IRQ_IS_MUXED(port)) {
@@ -1150,11 +1691,8 @@ static int sci_request_irq(struct sci_port *port)
desc = sci_irq_desc + i;
port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s",
dev_name(up->dev), desc->desc);
- if (!port->irqstr[j]) {
- dev_err(up->dev, "Failed to allocate %s IRQ string\n",
- desc->desc);
+ if (!port->irqstr[j])
goto out_nomem;
- }
ret = request_irq(irq, desc->handler, up->irqflags,
port->irqstr[j], port);
@@ -1228,7 +1766,7 @@ static unsigned int sci_tx_empty(struct uart_port *port)
static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
if (mctrl & TIOCM_LOOP) {
- struct plat_sci_reg *reg;
+ const struct plat_sci_reg *reg;
/*
* Standard loopback mode for SCFCR ports.
@@ -1250,356 +1788,10 @@ static unsigned int sci_get_mctrl(struct uart_port *port)
return TIOCM_DSR | TIOCM_CAR;
}
-#ifdef CONFIG_SERIAL_SH_SCI_DMA
-static void sci_dma_tx_complete(void *arg)
-{
- struct sci_port *s = arg;
- struct uart_port *port = &s->port;
- struct circ_buf *xmit = &port->state->xmit;
- unsigned long flags;
-
- dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
-
- spin_lock_irqsave(&port->lock, flags);
-
- xmit->tail += sg_dma_len(&s->sg_tx);
- xmit->tail &= UART_XMIT_SIZE - 1;
-
- port->icount.tx += sg_dma_len(&s->sg_tx);
-
- async_tx_ack(s->desc_tx);
- s->desc_tx = NULL;
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-
- if (!uart_circ_empty(xmit)) {
- s->cookie_tx = 0;
- schedule_work(&s->work_tx);
- } else {
- s->cookie_tx = -EINVAL;
- if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- u16 ctrl = serial_port_in(port, SCSCR);
- serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE);
- }
- }
-
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-/* Locking: called with port lock held */
-static int sci_dma_rx_push(struct sci_port *s, size_t count)
-{
- struct uart_port *port = &s->port;
- struct tty_port *tport = &port->state->port;
- int i, active, room;
-
- room = tty_buffer_request_room(tport, count);
-
- if (s->active_rx == s->cookie_rx[0]) {
- active = 0;
- } else if (s->active_rx == s->cookie_rx[1]) {
- active = 1;
- } else {
- dev_err(port->dev, "cookie %d not found!\n", s->active_rx);
- return 0;
- }
-
- if (room < count)
- dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n",
- count - room);
- if (!room)
- return room;
-
- for (i = 0; i < room; i++)
- tty_insert_flip_char(tport, ((u8 *)sg_virt(&s->sg_rx[active]))[i],
- TTY_NORMAL);
-
- port->icount.rx += room;
-
- return room;
-}
-
-static void sci_dma_rx_complete(void *arg)
-{
- struct sci_port *s = arg;
- struct uart_port *port = &s->port;
- unsigned long flags;
- int count;
-
- dev_dbg(port->dev, "%s(%d) active #%d\n",
- __func__, port->line, s->active_rx);
-
- spin_lock_irqsave(&port->lock, flags);
-
- count = sci_dma_rx_push(s, s->buf_len_rx);
-
- mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
-
- spin_unlock_irqrestore(&port->lock, flags);
-
- if (count)
- tty_flip_buffer_push(&port->state->port);
-
- schedule_work(&s->work_rx);
-}
-
-static void sci_rx_dma_release(struct sci_port *s, bool enable_pio)
-{
- struct dma_chan *chan = s->chan_rx;
- struct uart_port *port = &s->port;
-
- s->chan_rx = NULL;
- s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL;
- dma_release_channel(chan);
- if (sg_dma_address(&s->sg_rx[0]))
- dma_free_coherent(port->dev, s->buf_len_rx * 2,
- sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0]));
- if (enable_pio)
- sci_start_rx(port);
-}
-
-static void sci_tx_dma_release(struct sci_port *s, bool enable_pio)
-{
- struct dma_chan *chan = s->chan_tx;
- struct uart_port *port = &s->port;
-
- s->chan_tx = NULL;
- s->cookie_tx = -EINVAL;
- dma_release_channel(chan);
- if (enable_pio)
- sci_start_tx(port);
-}
-
-static void sci_submit_rx(struct sci_port *s)
-{
- struct dma_chan *chan = s->chan_rx;
- int i;
-
- for (i = 0; i < 2; i++) {
- struct scatterlist *sg = &s->sg_rx[i];
- struct dma_async_tx_descriptor *desc;
-
- desc = dmaengine_prep_slave_sg(chan,
- sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
-
- if (desc) {
- s->desc_rx[i] = desc;
- desc->callback = sci_dma_rx_complete;
- desc->callback_param = s;
- s->cookie_rx[i] = desc->tx_submit(desc);
- }
-
- if (!desc || s->cookie_rx[i] < 0) {
- if (i) {
- async_tx_ack(s->desc_rx[0]);
- s->cookie_rx[0] = -EINVAL;
- }
- if (desc) {
- async_tx_ack(desc);
- s->cookie_rx[i] = -EINVAL;
- }
- dev_warn(s->port.dev,
- "failed to re-start DMA, using PIO\n");
- sci_rx_dma_release(s, true);
- return;
- }
- dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n",
- __func__, s->cookie_rx[i], i);
- }
-
- s->active_rx = s->cookie_rx[0];
-
- dma_async_issue_pending(chan);
-}
-
-static void work_fn_rx(struct work_struct *work)
-{
- struct sci_port *s = container_of(work, struct sci_port, work_rx);
- struct uart_port *port = &s->port;
- struct dma_async_tx_descriptor *desc;
- int new;
-
- if (s->active_rx == s->cookie_rx[0]) {
- new = 0;
- } else if (s->active_rx == s->cookie_rx[1]) {
- new = 1;
- } else {
- dev_err(port->dev, "cookie %d not found!\n", s->active_rx);
- return;
- }
- desc = s->desc_rx[new];
-
- if (dma_async_is_tx_complete(s->chan_rx, s->active_rx, NULL, NULL) !=
- DMA_COMPLETE) {
- /* Handle incomplete DMA receive */
- struct dma_chan *chan = s->chan_rx;
- struct shdma_desc *sh_desc = container_of(desc,
- struct shdma_desc, async_tx);
- unsigned long flags;
- int count;
-
- dmaengine_terminate_all(chan);
- dev_dbg(port->dev, "Read %zu bytes with cookie %d\n",
- sh_desc->partial, sh_desc->cookie);
-
- spin_lock_irqsave(&port->lock, flags);
- count = sci_dma_rx_push(s, sh_desc->partial);
- spin_unlock_irqrestore(&port->lock, flags);
-
- if (count)
- tty_flip_buffer_push(&port->state->port);
-
- sci_submit_rx(s);
-
- return;
- }
-
- s->cookie_rx[new] = desc->tx_submit(desc);
- if (s->cookie_rx[new] < 0) {
- dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n");
- sci_rx_dma_release(s, true);
- return;
- }
-
- s->active_rx = s->cookie_rx[!new];
-
- dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n",
- __func__, s->cookie_rx[new], new, s->active_rx);
-}
-
-static void work_fn_tx(struct work_struct *work)
-{
- struct sci_port *s = container_of(work, struct sci_port, work_tx);
- struct dma_async_tx_descriptor *desc;
- struct dma_chan *chan = s->chan_tx;
- struct uart_port *port = &s->port;
- struct circ_buf *xmit = &port->state->xmit;
- struct scatterlist *sg = &s->sg_tx;
-
- /*
- * DMA is idle now.
- * Port xmit buffer is already mapped, and it is one page... Just adjust
- * offsets and lengths. Since it is a circular buffer, we have to
- * transmit till the end, and then the rest. Take the port lock to get a
- * consistent xmit buffer state.
- */
- spin_lock_irq(&port->lock);
- sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
- sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) +
- sg->offset;
- sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
- CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE));
- spin_unlock_irq(&port->lock);
-
- BUG_ON(!sg_dma_len(sg));
-
- desc = dmaengine_prep_slave_sg(chan,
- sg, s->sg_len_tx, DMA_MEM_TO_DEV,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc) {
- /* switch to PIO */
- sci_tx_dma_release(s, true);
- return;
- }
-
- dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE);
-
- spin_lock_irq(&port->lock);
- s->desc_tx = desc;
- desc->callback = sci_dma_tx_complete;
- desc->callback_param = s;
- spin_unlock_irq(&port->lock);
- s->cookie_tx = desc->tx_submit(desc);
- if (s->cookie_tx < 0) {
- dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n");
- /* switch to PIO */
- sci_tx_dma_release(s, true);
- return;
- }
-
- dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n",
- __func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
-
- dma_async_issue_pending(chan);
-}
-#endif
-
-static void sci_start_tx(struct uart_port *port)
-{
- struct sci_port *s = to_sci_port(port);
- unsigned short ctrl;
-
-#ifdef CONFIG_SERIAL_SH_SCI_DMA
- if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- u16 new, scr = serial_port_in(port, SCSCR);
- if (s->chan_tx)
- new = scr | SCSCR_TDRQE;
- else
- new = scr & ~SCSCR_TDRQE;
- if (new != scr)
- serial_port_out(port, SCSCR, new);
- }
-
- if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
- s->cookie_tx < 0) {
- s->cookie_tx = 0;
- schedule_work(&s->work_tx);
- }
-#endif
-
- if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
- ctrl = serial_port_in(port, SCSCR);
- serial_port_out(port, SCSCR, ctrl | SCSCR_TIE);
- }
-}
-
-static void sci_stop_tx(struct uart_port *port)
-{
- unsigned short ctrl;
-
- /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
- ctrl = serial_port_in(port, SCSCR);
-
- if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
- ctrl &= ~SCSCR_TDRQE;
-
- ctrl &= ~SCSCR_TIE;
-
- serial_port_out(port, SCSCR, ctrl);
-}
-
-static void sci_start_rx(struct uart_port *port)
-{
- unsigned short ctrl;
-
- ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port);
-
- if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
- ctrl &= ~SCSCR_RDRQE;
-
- serial_port_out(port, SCSCR, ctrl);
-}
-
-static void sci_stop_rx(struct uart_port *port)
-{
- unsigned short ctrl;
-
- ctrl = serial_port_in(port, SCSCR);
-
- if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
- ctrl &= ~SCSCR_RDRQE;
-
- ctrl &= ~port_rx_irq_mask(port);
-
- serial_port_out(port, SCSCR, ctrl);
-}
-
static void sci_break_ctl(struct uart_port *port, int break_state)
{
struct sci_port *s = to_sci_port(port);
- struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR;
+ const struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR;
unsigned short scscr, scsptr;
/* check wheter the port has SCSPTR */
@@ -1626,142 +1818,6 @@ static void sci_break_ctl(struct uart_port *port, int break_state)
serial_port_out(port, SCSCR, scscr);
}
-#ifdef CONFIG_SERIAL_SH_SCI_DMA
-static bool filter(struct dma_chan *chan, void *slave)
-{
- struct sh_dmae_slave *param = slave;
-
- dev_dbg(chan->device->dev, "%s: slave ID %d\n",
- __func__, param->shdma_slave.slave_id);
-
- chan->private = &param->shdma_slave;
- return true;
-}
-
-static void rx_timer_fn(unsigned long arg)
-{
- struct sci_port *s = (struct sci_port *)arg;
- struct uart_port *port = &s->port;
- u16 scr = serial_port_in(port, SCSCR);
-
- if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
- scr &= ~SCSCR_RDRQE;
- enable_irq(s->irqs[SCIx_RXI_IRQ]);
- }
- serial_port_out(port, SCSCR, scr | SCSCR_RIE);
- dev_dbg(port->dev, "DMA Rx timed out\n");
- schedule_work(&s->work_rx);
-}
-
-static void sci_request_dma(struct uart_port *port)
-{
- struct sci_port *s = to_sci_port(port);
- struct sh_dmae_slave *param;
- struct dma_chan *chan;
- dma_cap_mask_t mask;
- int nent;
-
- dev_dbg(port->dev, "%s: port %d\n", __func__, port->line);
-
- if (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0)
- return;
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- param = &s->param_tx;
-
- /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */
- param->shdma_slave.slave_id = s->cfg->dma_slave_tx;
-
- s->cookie_tx = -EINVAL;
- chan = dma_request_channel(mask, filter, param);
- dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan);
- if (chan) {
- s->chan_tx = chan;
- sg_init_table(&s->sg_tx, 1);
- /* UART circular tx buffer is an aligned page. */
- BUG_ON((uintptr_t)port->state->xmit.buf & ~PAGE_MASK);
- sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf),
- UART_XMIT_SIZE,
- (uintptr_t)port->state->xmit.buf & ~PAGE_MASK);
- nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE);
- if (!nent)
- sci_tx_dma_release(s, false);
- else
- dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n",
- __func__,
- sg_dma_len(&s->sg_tx), port->state->xmit.buf,
- &sg_dma_address(&s->sg_tx));
-
- s->sg_len_tx = nent;
-
- INIT_WORK(&s->work_tx, work_fn_tx);
- }
-
- param = &s->param_rx;
-
- /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */
- param->shdma_slave.slave_id = s->cfg->dma_slave_rx;
-
- chan = dma_request_channel(mask, filter, param);
- dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan);
- if (chan) {
- dma_addr_t dma[2];
- void *buf[2];
- int i;
-
- s->chan_rx = chan;
-
- s->buf_len_rx = 2 * max(16, (int)port->fifosize);
- buf[0] = dma_alloc_coherent(port->dev, s->buf_len_rx * 2,
- &dma[0], GFP_KERNEL);
-
- if (!buf[0]) {
- dev_warn(port->dev,
- "failed to allocate dma buffer, using PIO\n");
- sci_rx_dma_release(s, true);
- return;
- }
-
- buf[1] = buf[0] + s->buf_len_rx;
- dma[1] = dma[0] + s->buf_len_rx;
-
- for (i = 0; i < 2; i++) {
- struct scatterlist *sg = &s->sg_rx[i];
-
- sg_init_table(sg, 1);
- sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx,
- (uintptr_t)buf[i] & ~PAGE_MASK);
- sg_dma_address(sg) = dma[i];
- }
-
- INIT_WORK(&s->work_rx, work_fn_rx);
- setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s);
-
- sci_submit_rx(s);
- }
-}
-
-static void sci_free_dma(struct uart_port *port)
-{
- struct sci_port *s = to_sci_port(port);
-
- if (s->chan_tx)
- sci_tx_dma_release(s, false);
- if (s->chan_rx)
- sci_rx_dma_release(s, false);
-}
-#else
-static inline void sci_request_dma(struct uart_port *port)
-{
-}
-
-static inline void sci_free_dma(struct uart_port *port)
-{
-}
-#endif
-
static int sci_startup(struct uart_port *port)
{
struct sci_port *s = to_sci_port(port);
@@ -1796,6 +1852,14 @@ static void sci_shutdown(struct uart_port *port)
sci_stop_tx(port);
spin_unlock_irqrestore(&port->lock, flags);
+#ifdef CONFIG_SERIAL_SH_SCI_DMA
+ if (s->chan_rx) {
+ dev_dbg(port->dev, "%s(%d) deleting rx_timer\n", __func__,
+ port->line);
+ del_timer_sync(&s->rx_timer);
+ }
+#endif
+
sci_free_dma(port);
sci_free_irq(s);
}
@@ -1888,7 +1952,7 @@ static void sci_baud_calc_hscif(unsigned int bps, unsigned long freq,
static void sci_reset(struct uart_port *port)
{
- struct plat_sci_reg *reg;
+ const struct plat_sci_reg *reg;
unsigned int status;
do {
@@ -1906,7 +1970,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
struct sci_port *s = to_sci_port(port);
- struct plat_sci_reg *reg;
+ const struct plat_sci_reg *reg;
unsigned int baud, smr_val = 0, max_baud, cks = 0;
int t = -1;
unsigned int srr = 15;
@@ -1947,7 +2011,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
sci_reset(port);
- smr_val |= serial_port_in(port, SCSMR) & 3;
+ smr_val |= serial_port_in(port, SCSMR) & SCSMR_CKS;
uart_update_timeout(port, termios->c_cflag, baud);
@@ -1992,13 +2056,13 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
#ifdef CONFIG_SERIAL_SH_SCI_DMA
/*
* Calculate delay for 2 DMA buffers (4 FIFO).
- * See drivers/serial/serial_core.c::uart_update_timeout(). With 10
- * bits (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above function
- * calculates 1 jiffie for the data plus 5 jiffies for the "slop(e)."
- * Then below we calculate 5 jiffies (20ms) for 2 DMA buffers (4 FIFO
- * sizes), but when performing a faster transfer, value obtained by
- * this formula is may not enough. Therefore, if value is smaller than
- * 20msec, this sets 20msec as timeout of DMA.
+ * See serial_core.c::uart_update_timeout().
+ * With 10 bits (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above
+ * function calculates 1 jiffie for the data plus 5 jiffies for the
+ * "slop(e)." Then below we calculate 5 jiffies (20ms) for 2 DMA
+ * buffers (4 FIFO sizes), but when performing a faster transfer, the
+ * value obtained by this formula is too small. Therefore, if the value
+ * is smaller than 20ms, use 20ms as the timeout value for DMA.
*/
if (s->chan_rx) {
unsigned int bits;
@@ -2073,23 +2137,9 @@ static const char *sci_type(struct uart_port *port)
return NULL;
}
-static inline unsigned long sci_port_size(struct uart_port *port)
-{
- /*
- * Pick an arbitrary size that encapsulates all of the base
- * registers by default. This can be optimized later, or derived
- * from platform resource data at such a time that ports begin to
- * behave more erratically.
- */
- if (port->type == PORT_HSCIF)
- return 96;
- else
- return 64;
-}
-
static int sci_remap_port(struct uart_port *port)
{
- unsigned long size = sci_port_size(port);
+ struct sci_port *sport = to_sci_port(port);
/*
* Nothing to do if there's already an established membase.
@@ -2098,7 +2148,7 @@ static int sci_remap_port(struct uart_port *port)
return 0;
if (port->flags & UPF_IOREMAP) {
- port->membase = ioremap_nocache(port->mapbase, size);
+ port->membase = ioremap_nocache(port->mapbase, sport->reg_size);
if (unlikely(!port->membase)) {
dev_err(port->dev, "can't remap port#%d\n", port->line);
return -ENXIO;
@@ -2117,23 +2167,28 @@ static int sci_remap_port(struct uart_port *port)
static void sci_release_port(struct uart_port *port)
{
+ struct sci_port *sport = to_sci_port(port);
+
if (port->flags & UPF_IOREMAP) {
iounmap(port->membase);
port->membase = NULL;
}
- release_mem_region(port->mapbase, sci_port_size(port));
+ release_mem_region(port->mapbase, sport->reg_size);
}
static int sci_request_port(struct uart_port *port)
{
- unsigned long size = sci_port_size(port);
struct resource *res;
+ struct sci_port *sport = to_sci_port(port);
int ret;
- res = request_mem_region(port->mapbase, size, dev_name(port->dev));
- if (unlikely(res == NULL))
+ res = request_mem_region(port->mapbase, sport->reg_size,
+ dev_name(port->dev));
+ if (unlikely(res == NULL)) {
+ dev_err(port->dev, "request_mem_region failed.");
return -EBUSY;
+ }
ret = sci_remap_port(port);
if (unlikely(ret != 0)) {
@@ -2192,7 +2247,6 @@ static int sci_init_single(struct platform_device *dev,
{
struct uart_port *port = &sci_port->port;
const struct resource *res;
- unsigned int sampling_rate;
unsigned int i;
int ret;
@@ -2207,6 +2261,7 @@ static int sci_init_single(struct platform_device *dev,
return -ENOMEM;
port->mapbase = res->start;
+ sci_port->reg_size = resource_size(res);
for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i)
sci_port->irqs[i] = platform_get_irq(dev, i);
@@ -2234,33 +2289,39 @@ static int sci_init_single(struct platform_device *dev,
switch (p->type) {
case PORT_SCIFB:
port->fifosize = 256;
- sci_port->overrun_bit = 9;
- sampling_rate = 16;
+ sci_port->overrun_reg = SCxSR;
+ sci_port->overrun_mask = SCIFA_ORER;
+ sci_port->sampling_rate = 16;
break;
case PORT_HSCIF:
port->fifosize = 128;
- sampling_rate = 0;
- sci_port->overrun_bit = 0;
+ sci_port->overrun_reg = SCLSR;
+ sci_port->overrun_mask = SCLSR_ORER;
+ sci_port->sampling_rate = 0;
break;
case PORT_SCIFA:
port->fifosize = 64;
- sci_port->overrun_bit = 9;
- sampling_rate = 16;
+ sci_port->overrun_reg = SCxSR;
+ sci_port->overrun_mask = SCIFA_ORER;
+ sci_port->sampling_rate = 16;
break;
case PORT_SCIF:
port->fifosize = 16;
if (p->regtype == SCIx_SH7705_SCIF_REGTYPE) {
- sci_port->overrun_bit = 9;
- sampling_rate = 16;
+ sci_port->overrun_reg = SCxSR;
+ sci_port->overrun_mask = SCIFA_ORER;
+ sci_port->sampling_rate = 16;
} else {
- sci_port->overrun_bit = 0;
- sampling_rate = 32;
+ sci_port->overrun_reg = SCLSR;
+ sci_port->overrun_mask = SCLSR_ORER;
+ sci_port->sampling_rate = 32;
}
break;
default:
port->fifosize = 1;
- sci_port->overrun_bit = 5;
- sampling_rate = 32;
+ sci_port->overrun_reg = SCxSR;
+ sci_port->overrun_mask = SCI_ORER;
+ sci_port->sampling_rate = 32;
break;
}
@@ -2268,8 +2329,8 @@ static int sci_init_single(struct platform_device *dev,
* match the SoC datasheet, this should be investigated. Let platform
* data override the sampling rate for now.
*/
- sci_port->sampling_rate = p->sampling_rate ? p->sampling_rate
- : sampling_rate;
+ if (p->sampling_rate)
+ sci_port->sampling_rate = p->sampling_rate;
if (!early) {
sci_port->iclk = clk_get(&dev->dev, "sci_ick");
@@ -2301,19 +2362,22 @@ static int sci_init_single(struct platform_device *dev,
/*
* Establish some sensible defaults for the error detection.
*/
- sci_port->error_mask = (p->type == PORT_SCI) ?
- SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK;
-
- /*
- * Establish sensible defaults for the overrun detection, unless
- * the part has explicitly disabled support for it.
- */
+ if (p->type == PORT_SCI) {
+ sci_port->error_mask = SCI_DEFAULT_ERROR_MASK;
+ sci_port->error_clear = SCI_ERROR_CLEAR;
+ } else {
+ sci_port->error_mask = SCIF_DEFAULT_ERROR_MASK;
+ sci_port->error_clear = SCIF_ERROR_CLEAR;
+ }
/*
* Make the error mask inclusive of overrun detection, if
* supported.
*/
- sci_port->error_mask |= 1 << sci_port->overrun_bit;
+ if (sci_port->overrun_reg == SCxSR) {
+ sci_port->error_mask |= sci_port->overrun_mask;
+ sci_port->error_clear &= ~sci_port->overrun_mask;
+ }
port->type = p->type;
port->flags = UPF_FIXED_PORT | p->flags;
@@ -2536,6 +2600,12 @@ static const struct of_device_id of_sci_match[] = {
.regtype = SCIx_HSCIF_REGTYPE,
},
}, {
+ .compatible = "renesas,sci",
+ .data = &(const struct sci_port_info) {
+ .type = PORT_SCI,
+ .regtype = SCIx_SCI_REGTYPE,
+ },
+ }, {
/* Terminator */
},
};
@@ -2560,10 +2630,8 @@ sci_parse_dt(struct platform_device *pdev, unsigned int *dev_id)
info = match->data;
p = devm_kzalloc(&pdev->dev, sizeof(struct plat_sci_port), GFP_KERNEL);
- if (!p) {
- dev_err(&pdev->dev, "failed to allocate DT config data\n");
+ if (!p)
return NULL;
- }
/* Get the line number for the aliases node. */
id = of_alias_get_id(np, "serial");
diff --git a/kernel/drivers/tty/serial/sh-sci.h b/kernel/drivers/tty/serial/sh-sci.h
index d5db81a0a..bf69bbdcc 100644
--- a/kernel/drivers/tty/serial/sh-sci.h
+++ b/kernel/drivers/tty/serial/sh-sci.h
@@ -1,7 +1,115 @@
+#include <linux/bitops.h>
#include <linux/serial_core.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#define SCI_MAJOR 204
+#define SCI_MINOR_START 8
+
+
+/*
+ * SCI register subset common for all port types.
+ * Not all registers will exist on all parts.
+ */
+enum {
+ SCSMR, /* Serial Mode Register */
+ SCBRR, /* Bit Rate Register */
+ SCSCR, /* Serial Control Register */
+ SCxSR, /* Serial Status Register */
+ SCFCR, /* FIFO Control Register */
+ SCFDR, /* FIFO Data Count Register */
+ SCxTDR, /* Transmit (FIFO) Data Register */
+ SCxRDR, /* Receive (FIFO) Data Register */
+ SCLSR, /* Line Status Register */
+ SCTFDR, /* Transmit FIFO Data Count Register */
+ SCRFDR, /* Receive FIFO Data Count Register */
+ SCSPTR, /* Serial Port Register */
+ HSSRR, /* Sampling Rate Register */
+ SCPCR, /* Serial Port Control Register */
+ SCPDR, /* Serial Port Data Register */
+
+ SCIx_NR_REGS,
+};
+
+
+/* SCSMR (Serial Mode Register) */
+#define SCSMR_CHR BIT(6) /* 7-bit Character Length */
+#define SCSMR_PE BIT(5) /* Parity Enable */
+#define SCSMR_ODD BIT(4) /* Odd Parity */
+#define SCSMR_STOP BIT(3) /* Stop Bit Length */
+#define SCSMR_CKS 0x0003 /* Clock Select */
+
+/* Serial Control Register, SCIFA/SCIFB only bits */
+#define SCSCR_TDRQE BIT(15) /* Tx Data Transfer Request Enable */
+#define SCSCR_RDRQE BIT(14) /* Rx Data Transfer Request Enable */
+
+/* SCxSR (Serial Status Register) on SCI */
+#define SCI_TDRE BIT(7) /* Transmit Data Register Empty */
+#define SCI_RDRF BIT(6) /* Receive Data Register Full */
+#define SCI_ORER BIT(5) /* Overrun Error */
+#define SCI_FER BIT(4) /* Framing Error */
+#define SCI_PER BIT(3) /* Parity Error */
+#define SCI_TEND BIT(2) /* Transmit End */
+#define SCI_RESERVED 0x03 /* All reserved bits */
+
+#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
+
+#define SCI_RDxF_CLEAR (u32)(~(SCI_RESERVED | SCI_RDRF))
+#define SCI_ERROR_CLEAR (u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER))
+#define SCI_TDxE_CLEAR (u32)(~(SCI_RESERVED | SCI_TEND | SCI_TDRE))
+#define SCI_BREAK_CLEAR (u32)(~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER))
+
+/* SCxSR (Serial Status Register) on SCIF, SCIFA, SCIFB, HSCIF */
+#define SCIF_ER BIT(7) /* Receive Error */
+#define SCIF_TEND BIT(6) /* Transmission End */
+#define SCIF_TDFE BIT(5) /* Transmit FIFO Data Empty */
+#define SCIF_BRK BIT(4) /* Break Detect */
+#define SCIF_FER BIT(3) /* Framing Error */
+#define SCIF_PER BIT(2) /* Parity Error */
+#define SCIF_RDF BIT(1) /* Receive FIFO Data Full */
+#define SCIF_DR BIT(0) /* Receive Data Ready */
+/* SCIF only (optional) */
+#define SCIF_PERC 0xf000 /* Number of Parity Errors */
+#define SCIF_FERC 0x0f00 /* Number of Framing Errors */
+/*SCIFA/SCIFB and SCIF on SH7705/SH7720/SH7721 only */
+#define SCIFA_ORER BIT(9) /* Overrun Error */
+
+#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_BRK | SCIF_ER)
+
+#define SCIF_RDxF_CLEAR (u32)(~(SCIF_DR | SCIF_RDF))
+#define SCIF_ERROR_CLEAR (u32)(~(SCIF_PER | SCIF_FER | SCIF_ER))
+#define SCIF_TDxE_CLEAR (u32)(~(SCIF_TDFE))
+#define SCIF_BREAK_CLEAR (u32)(~(SCIF_PER | SCIF_FER | SCIF_BRK))
+
+/* SCFCR (FIFO Control Register) */
+#define SCFCR_MCE BIT(3) /* Modem Control Enable */
+#define SCFCR_TFRST BIT(2) /* Transmit FIFO Data Register Reset */
+#define SCFCR_RFRST BIT(1) /* Receive FIFO Data Register Reset */
+#define SCFCR_LOOP BIT(0) /* Loopback Test */
+
+/* SCLSR (Line Status Register) on (H)SCIF */
+#define SCLSR_ORER BIT(0) /* Overrun Error */
+
+/* SCSPTR (Serial Port Register), optional */
+#define SCSPTR_RTSIO BIT(7) /* Serial Port RTS Pin Input/Output */
+#define SCSPTR_RTSDT BIT(6) /* Serial Port RTS Pin Data */
+#define SCSPTR_CTSIO BIT(5) /* Serial Port CTS Pin Input/Output */
+#define SCSPTR_CTSDT BIT(4) /* Serial Port CTS Pin Data */
+#define SCSPTR_SPB2IO BIT(1) /* Serial Port Break Input/Output */
+#define SCSPTR_SPB2DT BIT(0) /* Serial Port Break Data */
+
+/* HSSRR HSCIF */
+#define HSCIF_SRE BIT(15) /* Sampling Rate Register Enable */
+
+/* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */
+#define SCPCR_RTSC BIT(4) /* Serial Port RTS Pin / Output Pin */
+#define SCPCR_CTSC BIT(3) /* Serial Port CTS Pin / Input Pin */
+
+/* SCPDR (Serial Port Data Register), SCIFA/SCIFB only */
+#define SCPDR_RTSD BIT(4) /* Serial Port RTS Output Pin Data */
+#define SCPDR_CTSD BIT(3) /* Serial Port CTS Input Pin Data */
+
+
#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND)
#define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF)
#define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE)
@@ -11,28 +119,11 @@
#define SCxSR_ERRORS(port) (to_sci_port(port)->error_mask)
-#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
- defined(CONFIG_CPU_SUBTYPE_SH7720) || \
- defined(CONFIG_CPU_SUBTYPE_SH7721) || \
- defined(CONFIG_ARCH_SH73A0) || \
- defined(CONFIG_ARCH_SH7372) || \
- defined(CONFIG_ARCH_R8A7740)
-
-# define SCxSR_RDxF_CLEAR(port) (serial_port_in(port, SCxSR) & 0xfffc)
-# define SCxSR_ERROR_CLEAR(port) (serial_port_in(port, SCxSR) & 0xfd73)
-# define SCxSR_TDxE_CLEAR(port) (serial_port_in(port, SCxSR) & 0xffdf)
-# define SCxSR_BREAK_CLEAR(port) (serial_port_in(port, SCxSR) & 0xffe3)
-#else
-# define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc)
-# define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073)
-# define SCxSR_TDxE_CLEAR(port) (((port)->type == PORT_SCI) ? 0x78 : 0x00df)
-# define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3)
-#endif
-
-/* SCFCR */
-#define SCFCR_RFRST 0x0002
-#define SCFCR_TFRST 0x0004
-#define SCFCR_MCE 0x0008
-
-#define SCI_MAJOR 204
-#define SCI_MINOR_START 8
+#define SCxSR_RDxF_CLEAR(port) \
+ (((port)->type == PORT_SCI) ? SCI_RDxF_CLEAR : SCIF_RDxF_CLEAR)
+#define SCxSR_ERROR_CLEAR(port) \
+ (to_sci_port(port)->error_clear)
+#define SCxSR_TDxE_CLEAR(port) \
+ (((port)->type == PORT_SCI) ? SCI_TDxE_CLEAR : SCIF_TDxE_CLEAR)
+#define SCxSR_BREAK_CLEAR(port) \
+ (((port)->type == PORT_SCI) ? SCI_BREAK_CLEAR : SCIF_BREAK_CLEAR)
diff --git a/kernel/drivers/tty/serial/sirfsoc_uart.c b/kernel/drivers/tty/serial/sirfsoc_uart.c
index 9de3eabe5..c6657de78 100644
--- a/kernel/drivers/tty/serial/sirfsoc_uart.c
+++ b/kernel/drivers/tty/serial/sirfsoc_uart.c
@@ -36,8 +36,6 @@ sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count);
static struct uart_driver sirfsoc_uart_drv;
static void sirfsoc_uart_tx_dma_complete_callback(void *param);
-static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port);
-static void sirfsoc_uart_rx_dma_complete_callback(void *param);
static const struct sirfsoc_baudrate_to_regv baudrate_to_regv[] = {
{4000000, 2359296},
{3500000, 1310721},
@@ -59,50 +57,7 @@ static const struct sirfsoc_baudrate_to_regv baudrate_to_regv[] = {
{9600, 1114979},
};
-static struct sirfsoc_uart_port sirfsoc_uart_ports[SIRFSOC_UART_NR] = {
- [0] = {
- .port = {
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 0,
- },
- },
- [1] = {
- .port = {
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 1,
- },
- },
- [2] = {
- .port = {
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 2,
- },
- },
- [3] = {
- .port = {
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 3,
- },
- },
- [4] = {
- .port = {
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 4,
- },
- },
- [5] = {
- .port = {
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF,
- .line = 5,
- },
- },
-};
+static struct sirfsoc_uart_port *sirf_ports[SIRFSOC_UART_NR];
static inline struct sirfsoc_uart_port *to_sirfport(struct uart_port *port)
{
@@ -116,8 +71,7 @@ static inline unsigned int sirfsoc_uart_tx_empty(struct uart_port *port)
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status;
reg = rd_regl(port, ureg->sirfsoc_tx_fifo_status);
-
- return (reg & ufifo_st->ff_empty(port->line)) ? TIOCSER_TEMT : 0;
+ return (reg & ufifo_st->ff_empty(port)) ? TIOCSER_TEMT : 0;
}
static unsigned int sirfsoc_uart_get_mctrl(struct uart_port *port)
@@ -152,6 +106,26 @@ static void sirfsoc_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
unsigned int val = assert ? SIRFUART_AFC_CTRL_RX_THD : 0x0;
unsigned int current_val;
+ if (mctrl & TIOCM_LOOP) {
+ if (sirfport->uart_reg->uart_type == SIRF_REAL_UART)
+ wr_regl(port, ureg->sirfsoc_line_ctrl,
+ rd_regl(port, ureg->sirfsoc_line_ctrl) |
+ SIRFUART_LOOP_BACK);
+ else
+ wr_regl(port, ureg->sirfsoc_mode1,
+ rd_regl(port, ureg->sirfsoc_mode1) |
+ SIRFSOC_USP_LOOP_BACK_CTRL);
+ } else {
+ if (sirfport->uart_reg->uart_type == SIRF_REAL_UART)
+ wr_regl(port, ureg->sirfsoc_line_ctrl,
+ rd_regl(port, ureg->sirfsoc_line_ctrl) &
+ ~SIRFUART_LOOP_BACK);
+ else
+ wr_regl(port, ureg->sirfsoc_mode1,
+ rd_regl(port, ureg->sirfsoc_mode1) &
+ ~SIRFSOC_USP_LOOP_BACK_CTRL);
+ }
+
if (!sirfport->hw_flow_ctrl || !sirfport->ms_enabled)
return;
if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
@@ -182,16 +156,19 @@ static void sirfsoc_uart_stop_tx(struct uart_port *port)
rd_regl(port, ureg->sirfsoc_int_en_reg) &
~uint_en->sirfsoc_txfifo_empty_en);
else
- wr_regl(port, SIRFUART_INT_EN_CLR,
+ wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
uint_en->sirfsoc_txfifo_empty_en);
}
} else {
+ if (sirfport->uart_reg->uart_type == SIRF_USP_UART)
+ wr_regl(port, ureg->sirfsoc_tx_rx_en, rd_regl(port,
+ ureg->sirfsoc_tx_rx_en) & ~SIRFUART_TX_EN);
if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg) &
~uint_en->sirfsoc_txfifo_empty_en);
else
- wr_regl(port, SIRFUART_INT_EN_CLR,
+ wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
uint_en->sirfsoc_txfifo_empty_en);
}
}
@@ -222,7 +199,7 @@ static void sirfsoc_uart_tx_with_dma(struct sirfsoc_uart_port *sirfport)
rd_regl(port, ureg->sirfsoc_int_en_reg)&
~(uint_en->sirfsoc_txfifo_empty_en));
else
- wr_regl(port, SIRFUART_INT_EN_CLR,
+ wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
uint_en->sirfsoc_txfifo_empty_en);
/*
* DMA requires buffer address and buffer length are both aligned with
@@ -290,8 +267,11 @@ static void sirfsoc_uart_start_tx(struct uart_port *port)
if (sirfport->tx_dma_chan)
sirfsoc_uart_tx_with_dma(sirfport);
else {
- sirfsoc_uart_pio_tx_chars(sirfport,
- SIRFSOC_UART_IO_TX_REASONABLE_CNT);
+ if (sirfport->uart_reg->uart_type == SIRF_USP_UART)
+ wr_regl(port, ureg->sirfsoc_tx_rx_en, rd_regl(port,
+ ureg->sirfsoc_tx_rx_en) | SIRFUART_TX_EN);
+ wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_STOP);
+ sirfsoc_uart_pio_tx_chars(sirfport, port->fifosize);
wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START);
if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
@@ -314,21 +294,25 @@ static void sirfsoc_uart_stop_rx(struct uart_port *port)
if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg) &
- ~(SIRFUART_RX_DMA_INT_EN(port, uint_en) |
+ ~(SIRFUART_RX_DMA_INT_EN(uint_en,
+ sirfport->uart_reg->uart_type) |
uint_en->sirfsoc_rx_done_en));
else
- wr_regl(port, SIRFUART_INT_EN_CLR,
- SIRFUART_RX_DMA_INT_EN(port, uint_en)|
- uint_en->sirfsoc_rx_done_en);
+ wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
+ SIRFUART_RX_DMA_INT_EN(uint_en,
+ sirfport->uart_reg->uart_type)|
+ uint_en->sirfsoc_rx_done_en);
dmaengine_terminate_all(sirfport->rx_dma_chan);
} else {
if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg)&
- ~(SIRFUART_RX_IO_INT_EN(port, uint_en)));
+ ~(SIRFUART_RX_IO_INT_EN(uint_en,
+ sirfport->uart_reg->uart_type)));
else
- wr_regl(port, SIRFUART_INT_EN_CLR,
- SIRFUART_RX_IO_INT_EN(port, uint_en));
+ wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
+ SIRFUART_RX_IO_INT_EN(uint_en,
+ sirfport->uart_reg->uart_type));
}
}
@@ -349,7 +333,7 @@ static void sirfsoc_uart_disable_ms(struct uart_port *port)
rd_regl(port, ureg->sirfsoc_int_en_reg)&
~uint_en->sirfsoc_cts_en);
else
- wr_regl(port, SIRFUART_INT_EN_CLR,
+ wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
uint_en->sirfsoc_cts_en);
} else
disable_irq(gpio_to_irq(sirfport->cts_gpio));
@@ -379,7 +363,8 @@ static void sirfsoc_uart_enable_ms(struct uart_port *port)
if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
wr_regl(port, ureg->sirfsoc_afc_ctrl,
rd_regl(port, ureg->sirfsoc_afc_ctrl) |
- SIRFUART_AFC_TX_EN | SIRFUART_AFC_RX_EN);
+ SIRFUART_AFC_TX_EN | SIRFUART_AFC_RX_EN |
+ SIRFUART_AFC_CTRL_RX_THD);
if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg)
@@ -417,7 +402,7 @@ sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count)
if (!tty)
return -ENODEV;
while (!(rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
- ufifo_st->ff_empty(port->line))) {
+ ufifo_st->ff_empty(port))) {
ch = rd_regl(port, ureg->sirfsoc_rx_fifo_data) |
SIRFUART_DUMMY_READ;
if (unlikely(uart_handle_sysrq_char(port, ch)))
@@ -428,7 +413,6 @@ sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count)
break;
}
- sirfport->rx_io_count += rx_count;
port->icount.rx += rx_count;
return rx_count;
@@ -444,7 +428,7 @@ sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count)
unsigned int num_tx = 0;
while (!uart_circ_empty(xmit) &&
!(rd_regl(port, ureg->sirfsoc_tx_fifo_status) &
- ufifo_st->ff_full(port->line)) &&
+ ufifo_st->ff_full(port)) &&
count--) {
wr_regl(port, ureg->sirfsoc_tx_fifo_data,
xmit->buf[xmit->tail]);
@@ -478,139 +462,6 @@ static void sirfsoc_uart_tx_dma_complete_callback(void *param)
spin_unlock_irqrestore(&port->lock, flags);
}
-static void sirfsoc_uart_insert_rx_buf_to_tty(
- struct sirfsoc_uart_port *sirfport, int count)
-{
- struct uart_port *port = &sirfport->port;
- struct tty_port *tport = &port->state->port;
- int inserted;
-
- inserted = tty_insert_flip_string(tport,
- sirfport->rx_dma_items[sirfport->rx_completed].xmit.buf, count);
- port->icount.rx += inserted;
-}
-
-static void sirfsoc_rx_submit_one_dma_desc(struct uart_port *port, int index)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
-
- sirfport->rx_dma_items[index].xmit.tail =
- sirfport->rx_dma_items[index].xmit.head = 0;
- sirfport->rx_dma_items[index].desc =
- dmaengine_prep_slave_single(sirfport->rx_dma_chan,
- sirfport->rx_dma_items[index].dma_addr, SIRFSOC_RX_DMA_BUF_SIZE,
- DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
- if (!sirfport->rx_dma_items[index].desc) {
- dev_err(port->dev, "DMA slave single fail\n");
- return;
- }
- sirfport->rx_dma_items[index].desc->callback =
- sirfsoc_uart_rx_dma_complete_callback;
- sirfport->rx_dma_items[index].desc->callback_param = sirfport;
- sirfport->rx_dma_items[index].cookie =
- dmaengine_submit(sirfport->rx_dma_items[index].desc);
- dma_async_issue_pending(sirfport->rx_dma_chan);
-}
-
-static void sirfsoc_rx_tmo_process_tl(unsigned long param)
-{
- struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param;
- struct uart_port *port = &sirfport->port;
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
- struct sirfsoc_int_status *uint_st = &sirfport->uart_reg->uart_int_st;
- unsigned int count;
- unsigned long flags;
- struct dma_tx_state tx_state;
-
- spin_lock_irqsave(&port->lock, flags);
- while (DMA_COMPLETE == dmaengine_tx_status(sirfport->rx_dma_chan,
- sirfport->rx_dma_items[sirfport->rx_completed].cookie, &tx_state)) {
- sirfsoc_uart_insert_rx_buf_to_tty(sirfport,
- SIRFSOC_RX_DMA_BUF_SIZE);
- sirfport->rx_completed++;
- sirfport->rx_completed %= SIRFSOC_RX_LOOP_BUF_CNT;
- }
- count = CIRC_CNT(sirfport->rx_dma_items[sirfport->rx_issued].xmit.head,
- sirfport->rx_dma_items[sirfport->rx_issued].xmit.tail,
- SIRFSOC_RX_DMA_BUF_SIZE);
- if (count > 0)
- sirfsoc_uart_insert_rx_buf_to_tty(sirfport, count);
- wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
- rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
- SIRFUART_IO_MODE);
- sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count);
- if (sirfport->rx_io_count == 4) {
- sirfport->rx_io_count = 0;
- wr_regl(port, ureg->sirfsoc_int_st_reg,
- uint_st->sirfsoc_rx_done);
- if (!sirfport->is_atlas7)
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- rd_regl(port, ureg->sirfsoc_int_en_reg) &
- ~(uint_en->sirfsoc_rx_done_en));
- else
- wr_regl(port, SIRFUART_INT_EN_CLR,
- uint_en->sirfsoc_rx_done_en);
- sirfsoc_uart_start_next_rx_dma(port);
- } else {
- wr_regl(port, ureg->sirfsoc_int_st_reg,
- uint_st->sirfsoc_rx_done);
- if (!sirfport->is_atlas7)
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- rd_regl(port, ureg->sirfsoc_int_en_reg) |
- (uint_en->sirfsoc_rx_done_en));
- else
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- uint_en->sirfsoc_rx_done_en);
- }
- spin_unlock_irqrestore(&port->lock, flags);
- tty_flip_buffer_push(&port->state->port);
-}
-
-static void sirfsoc_uart_handle_rx_tmo(struct sirfsoc_uart_port *sirfport)
-{
- struct uart_port *port = &sirfport->port;
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
- struct dma_tx_state tx_state;
- dmaengine_tx_status(sirfport->rx_dma_chan,
- sirfport->rx_dma_items[sirfport->rx_issued].cookie, &tx_state);
- dmaengine_terminate_all(sirfport->rx_dma_chan);
- sirfport->rx_dma_items[sirfport->rx_issued].xmit.head =
- SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue;
- if (!sirfport->is_atlas7)
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- rd_regl(port, ureg->sirfsoc_int_en_reg) &
- ~(uint_en->sirfsoc_rx_timeout_en));
- else
- wr_regl(port, SIRFUART_INT_EN_CLR,
- uint_en->sirfsoc_rx_timeout_en);
- tasklet_schedule(&sirfport->rx_tmo_process_tasklet);
-}
-
-static void sirfsoc_uart_handle_rx_done(struct sirfsoc_uart_port *sirfport)
-{
- struct uart_port *port = &sirfport->port;
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
- struct sirfsoc_int_status *uint_st = &sirfport->uart_reg->uart_int_st;
-
- sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count);
- if (sirfport->rx_io_count == 4) {
- sirfport->rx_io_count = 0;
- if (!sirfport->is_atlas7)
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- rd_regl(port, ureg->sirfsoc_int_en_reg) &
- ~(uint_en->sirfsoc_rx_done_en));
- else
- wr_regl(port, SIRFUART_INT_EN_CLR,
- uint_en->sirfsoc_rx_done_en);
- wr_regl(port, ureg->sirfsoc_int_st_reg,
- uint_st->sirfsoc_rx_timeout);
- sirfsoc_uart_start_next_rx_dma(port);
- }
-}
-
static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id)
{
unsigned long intr_status;
@@ -628,20 +479,25 @@ static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id)
intr_status = rd_regl(port, ureg->sirfsoc_int_st_reg);
wr_regl(port, ureg->sirfsoc_int_st_reg, intr_status);
intr_status &= rd_regl(port, ureg->sirfsoc_int_en_reg);
- if (unlikely(intr_status & (SIRFUART_ERR_INT_STAT(port, uint_st)))) {
+ if (unlikely(intr_status & (SIRFUART_ERR_INT_STAT(uint_st,
+ sirfport->uart_reg->uart_type)))) {
if (intr_status & uint_st->sirfsoc_rxd_brk) {
port->icount.brk++;
if (uart_handle_break(port))
goto recv_char;
}
- if (intr_status & uint_st->sirfsoc_rx_oflow)
+ if (intr_status & uint_st->sirfsoc_rx_oflow) {
port->icount.overrun++;
+ flag = TTY_OVERRUN;
+ }
if (intr_status & uint_st->sirfsoc_frm_err) {
port->icount.frame++;
flag = TTY_FRAME;
}
- if (intr_status & uint_st->sirfsoc_parity_err)
+ if (intr_status & uint_st->sirfsoc_parity_err) {
+ port->icount.parity++;
flag = TTY_PARITY;
+ }
wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET);
wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START);
@@ -662,15 +518,51 @@ recv_char:
uart_handle_cts_change(port, cts_status);
wake_up_interruptible(&state->port.delta_msr_wait);
}
- if (sirfport->rx_dma_chan) {
- if (intr_status & uint_st->sirfsoc_rx_timeout)
- sirfsoc_uart_handle_rx_tmo(sirfport);
- if (intr_status & uint_st->sirfsoc_rx_done)
- sirfsoc_uart_handle_rx_done(sirfport);
- } else {
- if (intr_status & SIRFUART_RX_IO_INT_ST(uint_st))
- sirfsoc_uart_pio_rx_chars(port,
- SIRFSOC_UART_IO_RX_MAX_CNT);
+ if (!sirfport->rx_dma_chan &&
+ (intr_status & SIRFUART_RX_IO_INT_ST(uint_st))) {
+ /*
+ * chip will trigger continuous RX_TIMEOUT interrupt
+ * in RXFIFO empty and not trigger if RXFIFO recevice
+ * data in limit time, original method use RX_TIMEOUT
+ * will trigger lots of useless interrupt in RXFIFO
+ * empty.RXFIFO received one byte will trigger RX_DONE
+ * interrupt.use RX_DONE to wait for data received
+ * into RXFIFO, use RX_THD/RX_FULL for lots data receive
+ * and use RX_TIMEOUT for the last left data.
+ */
+ if (intr_status & uint_st->sirfsoc_rx_done) {
+ if (!sirfport->is_atlas7) {
+ wr_regl(port, ureg->sirfsoc_int_en_reg,
+ rd_regl(port, ureg->sirfsoc_int_en_reg)
+ & ~(uint_en->sirfsoc_rx_done_en));
+ wr_regl(port, ureg->sirfsoc_int_en_reg,
+ rd_regl(port, ureg->sirfsoc_int_en_reg)
+ | (uint_en->sirfsoc_rx_timeout_en));
+ } else {
+ wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
+ uint_en->sirfsoc_rx_done_en);
+ wr_regl(port, ureg->sirfsoc_int_en_reg,
+ uint_en->sirfsoc_rx_timeout_en);
+ }
+ } else {
+ if (intr_status & uint_st->sirfsoc_rx_timeout) {
+ if (!sirfport->is_atlas7) {
+ wr_regl(port, ureg->sirfsoc_int_en_reg,
+ rd_regl(port, ureg->sirfsoc_int_en_reg)
+ & ~(uint_en->sirfsoc_rx_timeout_en));
+ wr_regl(port, ureg->sirfsoc_int_en_reg,
+ rd_regl(port, ureg->sirfsoc_int_en_reg)
+ | (uint_en->sirfsoc_rx_done_en));
+ } else {
+ wr_regl(port,
+ ureg->sirfsoc_int_en_clr_reg,
+ uint_en->sirfsoc_rx_timeout_en);
+ wr_regl(port, ureg->sirfsoc_int_en_reg,
+ uint_en->sirfsoc_rx_done_en);
+ }
+ }
+ sirfsoc_uart_pio_rx_chars(port, port->fifosize);
+ }
}
spin_unlock(&port->lock);
tty_flip_buffer_push(&state->port);
@@ -684,10 +576,10 @@ recv_char:
return IRQ_HANDLED;
} else {
sirfsoc_uart_pio_tx_chars(sirfport,
- SIRFSOC_UART_IO_TX_REASONABLE_CNT);
+ port->fifosize);
if ((uart_circ_empty(xmit)) &&
(rd_regl(port, ureg->sirfsoc_tx_fifo_status) &
- ufifo_st->ff_empty(port->line)))
+ ufifo_st->ff_empty(port)))
sirfsoc_uart_stop_tx(port);
}
}
@@ -697,41 +589,8 @@ recv_char:
return IRQ_HANDLED;
}
-static void sirfsoc_uart_rx_dma_complete_tl(unsigned long param)
-{
- struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param;
- struct uart_port *port = &sirfport->port;
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
- unsigned long flags;
- struct dma_tx_state tx_state;
- spin_lock_irqsave(&port->lock, flags);
- while (DMA_COMPLETE == dmaengine_tx_status(sirfport->rx_dma_chan,
- sirfport->rx_dma_items[sirfport->rx_completed].cookie, &tx_state)) {
- sirfsoc_uart_insert_rx_buf_to_tty(sirfport,
- SIRFSOC_RX_DMA_BUF_SIZE);
- if (rd_regl(port, ureg->sirfsoc_int_en_reg) &
- uint_en->sirfsoc_rx_timeout_en)
- sirfsoc_rx_submit_one_dma_desc(port,
- sirfport->rx_completed++);
- else
- sirfport->rx_completed++;
- sirfport->rx_completed %= SIRFSOC_RX_LOOP_BUF_CNT;
- }
- spin_unlock_irqrestore(&port->lock, flags);
- tty_flip_buffer_push(&port->state->port);
-}
-
static void sirfsoc_uart_rx_dma_complete_callback(void *param)
{
- struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param;
- unsigned long flags;
-
- spin_lock_irqsave(&sirfport->port.lock, flags);
- sirfport->rx_issued++;
- sirfport->rx_issued %= SIRFSOC_RX_LOOP_BUF_CNT;
- tasklet_schedule(&sirfport->rx_dma_complete_tasklet);
- spin_unlock_irqrestore(&sirfport->port.lock, flags);
}
/* submit rx dma task into dmaengine */
@@ -740,44 +599,35 @@ static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port)
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
- int i;
- sirfport->rx_io_count = 0;
wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) &
~SIRFUART_IO_MODE);
- for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++)
- sirfsoc_rx_submit_one_dma_desc(port, i);
- sirfport->rx_completed = sirfport->rx_issued = 0;
+ sirfport->rx_dma_items.xmit.tail =
+ sirfport->rx_dma_items.xmit.head = 0;
+ sirfport->rx_dma_items.desc =
+ dmaengine_prep_dma_cyclic(sirfport->rx_dma_chan,
+ sirfport->rx_dma_items.dma_addr, SIRFSOC_RX_DMA_BUF_SIZE,
+ SIRFSOC_RX_DMA_BUF_SIZE / 2,
+ DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
+ if (IS_ERR_OR_NULL(sirfport->rx_dma_items.desc)) {
+ dev_err(port->dev, "DMA slave single fail\n");
+ return;
+ }
+ sirfport->rx_dma_items.desc->callback =
+ sirfsoc_uart_rx_dma_complete_callback;
+ sirfport->rx_dma_items.desc->callback_param = sirfport;
+ sirfport->rx_dma_items.cookie =
+ dmaengine_submit(sirfport->rx_dma_items.desc);
+ dma_async_issue_pending(sirfport->rx_dma_chan);
if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg) |
- SIRFUART_RX_DMA_INT_EN(port, uint_en));
+ SIRFUART_RX_DMA_INT_EN(uint_en,
+ sirfport->uart_reg->uart_type));
else
wr_regl(port, ureg->sirfsoc_int_en_reg,
- SIRFUART_RX_DMA_INT_EN(port, uint_en));
-}
-
-static void sirfsoc_uart_start_rx(struct uart_port *port)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
-
- sirfport->rx_io_count = 0;
- wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET);
- wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
- wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START);
- if (sirfport->rx_dma_chan)
- sirfsoc_uart_start_next_rx_dma(port);
- else {
- if (!sirfport->is_atlas7)
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- rd_regl(port, ureg->sirfsoc_int_en_reg) |
- SIRFUART_RX_IO_INT_EN(port, uint_en));
- else
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- SIRFUART_RX_IO_INT_EN(port, uint_en));
- }
+ SIRFUART_RX_DMA_INT_EN(uint_en,
+ sirfport->uart_reg->uart_type));
}
static unsigned int
@@ -789,7 +639,7 @@ sirfsoc_usp_calc_sample_div(unsigned long set_rate,
unsigned long ioclk_div = 0;
unsigned long temp_delta;
- for (sample_div = SIRF_MIN_SAMPLE_DIV;
+ for (sample_div = SIRF_USP_MIN_SAMPLE_DIV;
sample_div <= SIRF_MAX_SAMPLE_DIV; sample_div++) {
temp_delta = ioclk_rate -
(ioclk_rate + (set_rate * sample_div) / 2)
@@ -910,10 +760,11 @@ static void sirfsoc_uart_set_termios(struct uart_port *port,
config_reg |= SIRFUART_STICK_BIT_MARK;
else
config_reg |= SIRFUART_STICK_BIT_SPACE;
- } else if (termios->c_cflag & PARODD) {
- config_reg |= SIRFUART_STICK_BIT_ODD;
} else {
- config_reg |= SIRFUART_STICK_BIT_EVEN;
+ if (termios->c_cflag & PARODD)
+ config_reg |= SIRFUART_STICK_BIT_ODD;
+ else
+ config_reg |= SIRFUART_STICK_BIT_EVEN;
}
}
} else {
@@ -972,11 +823,10 @@ static void sirfsoc_uart_set_termios(struct uart_port *port,
rx_time_out = SIRFSOC_UART_RX_TIMEOUT(set_baud, 20000);
rx_time_out = SIRFUART_RECV_TIMEOUT_VALUE(rx_time_out);
txfifo_op_reg = rd_regl(port, ureg->sirfsoc_tx_fifo_op);
- wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_STOP);
wr_regl(port, ureg->sirfsoc_tx_fifo_op,
(txfifo_op_reg & ~SIRFUART_FIFO_START));
if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
- config_reg |= SIRFUART_RECV_TIMEOUT(port, rx_time_out);
+ config_reg |= SIRFUART_UART_RECV_TIMEOUT(rx_time_out);
wr_regl(port, ureg->sirfsoc_line_ctrl, config_reg);
} else {
/*tx frame ctrl*/
@@ -999,7 +849,7 @@ static void sirfsoc_uart_set_termios(struct uart_port *port,
wr_regl(port, ureg->sirfsoc_rx_frame_ctrl, len_val);
/*async param*/
wr_regl(port, ureg->sirfsoc_async_param_reg,
- (SIRFUART_RECV_TIMEOUT(port, rx_time_out)) |
+ (SIRFUART_USP_RECV_TIMEOUT(rx_time_out)) |
(sample_div_reg & SIRFSOC_USP_ASYNC_DIV2_MASK) <<
SIRFSOC_USP_ASYNC_DIV2_OFFSET);
}
@@ -1008,9 +858,14 @@ static void sirfsoc_uart_set_termios(struct uart_port *port,
else
wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_IO_MODE);
if (sirfport->rx_dma_chan)
- wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_DMA_MODE);
+ wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
+ rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) &
+ ~SIRFUART_IO_MODE);
else
- wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_IO_MODE);
+ wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
+ rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
+ SIRFUART_IO_MODE);
+ sirfport->rx_period_time = 20000000;
/* Reset Rx/Tx FIFO Threshold level for proper baudrate */
if (set_baud < 1000000)
threshold_div = 1;
@@ -1023,7 +878,6 @@ static void sirfsoc_uart_set_termios(struct uart_port *port,
txfifo_op_reg |= SIRFUART_FIFO_START;
wr_regl(port, ureg->sirfsoc_tx_fifo_op, txfifo_op_reg);
uart_update_timeout(port, termios->c_cflag, set_baud);
- sirfsoc_uart_start_rx(port);
wr_regl(port, ureg->sirfsoc_tx_rx_en, SIRFUART_TX_EN | SIRFUART_RX_EN);
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -1032,28 +886,20 @@ static void sirfsoc_uart_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- if (!state) {
- if (sirfport->is_bt_uart) {
- clk_prepare_enable(sirfport->clk_noc);
- clk_prepare_enable(sirfport->clk_general);
- }
+ if (!state)
clk_prepare_enable(sirfport->clk);
- } else {
+ else
clk_disable_unprepare(sirfport->clk);
- if (sirfport->is_bt_uart) {
- clk_disable_unprepare(sirfport->clk_general);
- clk_disable_unprepare(sirfport->clk_noc);
- }
- }
}
static int sirfsoc_uart_startup(struct uart_port *port)
{
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
+ struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
unsigned int index = port->line;
int ret;
- set_irq_flags(port->irq, IRQF_VALID | IRQF_NOAUTOEN);
+ irq_modify_status(port->irq, IRQ_NOREQUEST, IRQ_NOAUTOEN);
ret = request_irq(port->irq,
sirfsoc_uart_isr,
0,
@@ -1064,7 +910,6 @@ static int sirfsoc_uart_startup(struct uart_port *port)
index, port->irq);
goto irq_err;
}
-
/* initial hardware settings */
wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl,
rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl) |
@@ -1072,6 +917,9 @@ static int sirfsoc_uart_startup(struct uart_port *port)
wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
SIRFUART_IO_MODE);
+ wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
+ rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) &
+ ~SIRFUART_RX_DMA_FLUSH);
wr_regl(port, ureg->sirfsoc_tx_dma_io_len, 0);
wr_regl(port, ureg->sirfsoc_rx_dma_io_len, 0);
wr_regl(port, ureg->sirfsoc_tx_rx_en, SIRFUART_RX_EN | SIRFUART_TX_EN);
@@ -1080,16 +928,15 @@ static int sirfsoc_uart_startup(struct uart_port *port)
SIRFSOC_USP_ENDIAN_CTRL_LSBF |
SIRFSOC_USP_EN);
wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_RESET);
- wr_regl(port, ureg->sirfsoc_tx_fifo_op, 0);
wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET);
wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, SIRFUART_FIFO_THD(port));
wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl, SIRFUART_FIFO_THD(port));
if (sirfport->rx_dma_chan)
wr_regl(port, ureg->sirfsoc_rx_fifo_level_chk,
- SIRFUART_RX_FIFO_CHK_SC(port->line, 0x4) |
- SIRFUART_RX_FIFO_CHK_LC(port->line, 0xe) |
- SIRFUART_RX_FIFO_CHK_HC(port->line, 0x1b));
+ SIRFUART_RX_FIFO_CHK_SC(port->line, 0x1) |
+ SIRFUART_RX_FIFO_CHK_LC(port->line, 0x2) |
+ SIRFUART_RX_FIFO_CHK_HC(port->line, 0x4));
if (sirfport->tx_dma_chan) {
sirfport->tx_dma_state = TX_DMA_IDLE;
wr_regl(port, ureg->sirfsoc_tx_fifo_level_chk,
@@ -1100,8 +947,8 @@ static int sirfsoc_uart_startup(struct uart_port *port)
sirfport->ms_enabled = false;
if (sirfport->uart_reg->uart_type == SIRF_USP_UART &&
sirfport->hw_flow_ctrl) {
- set_irq_flags(gpio_to_irq(sirfport->cts_gpio),
- IRQF_VALID | IRQF_NOAUTOEN);
+ irq_modify_status(gpio_to_irq(sirfport->cts_gpio),
+ IRQ_NOREQUEST, IRQ_NOAUTOEN);
ret = request_irq(gpio_to_irq(sirfport->cts_gpio),
sirfsoc_uart_usp_cts_handler, IRQF_TRIGGER_FALLING |
IRQF_TRIGGER_RISING, "usp_cts_irq", sirfport);
@@ -1110,7 +957,40 @@ static int sirfsoc_uart_startup(struct uart_port *port)
goto init_rx_err;
}
}
-
+ if (sirfport->uart_reg->uart_type == SIRF_REAL_UART &&
+ sirfport->rx_dma_chan)
+ wr_regl(port, ureg->sirfsoc_swh_dma_io,
+ SIRFUART_CLEAR_RX_ADDR_EN);
+ if (sirfport->uart_reg->uart_type == SIRF_USP_UART &&
+ sirfport->rx_dma_chan)
+ wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
+ rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
+ SIRFSOC_USP_FRADDR_CLR_EN);
+ if (sirfport->rx_dma_chan && !sirfport->is_hrt_enabled) {
+ sirfport->is_hrt_enabled = true;
+ sirfport->rx_period_time = 20000000;
+ sirfport->rx_last_pos = -1;
+ sirfport->pio_fetch_cnt = 0;
+ sirfport->rx_dma_items.xmit.tail =
+ sirfport->rx_dma_items.xmit.head = 0;
+ hrtimer_start(&sirfport->hrt,
+ ns_to_ktime(sirfport->rx_period_time),
+ HRTIMER_MODE_REL);
+ }
+ wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START);
+ if (sirfport->rx_dma_chan)
+ sirfsoc_uart_start_next_rx_dma(port);
+ else {
+ if (!sirfport->is_atlas7)
+ wr_regl(port, ureg->sirfsoc_int_en_reg,
+ rd_regl(port, ureg->sirfsoc_int_en_reg) |
+ SIRFUART_RX_IO_INT_EN(uint_en,
+ sirfport->uart_reg->uart_type));
+ else
+ wr_regl(port, ureg->sirfsoc_int_en_reg,
+ SIRFUART_RX_IO_INT_EN(uint_en,
+ sirfport->uart_reg->uart_type));
+ }
enable_irq(port->irq);
return 0;
@@ -1124,10 +1004,13 @@ static void sirfsoc_uart_shutdown(struct uart_port *port)
{
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
+ struct circ_buf *xmit;
+
+ xmit = &sirfport->rx_dma_items.xmit;
if (!sirfport->is_atlas7)
wr_regl(port, ureg->sirfsoc_int_en_reg, 0);
else
- wr_regl(port, SIRFUART_INT_EN_CLR, ~0UL);
+ wr_regl(port, ureg->sirfsoc_int_en_clr_reg, ~0UL);
free_irq(port->irq, sirfport);
if (sirfport->ms_enabled)
@@ -1139,6 +1022,15 @@ static void sirfsoc_uart_shutdown(struct uart_port *port)
}
if (sirfport->tx_dma_chan)
sirfport->tx_dma_state = TX_DMA_IDLE;
+ if (sirfport->rx_dma_chan && sirfport->is_hrt_enabled) {
+ while (((rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
+ SIRFUART_RX_FIFO_MASK) > sirfport->pio_fetch_cnt) &&
+ !CIRC_CNT(xmit->head, xmit->tail,
+ SIRFSOC_RX_DMA_BUF_SIZE))
+ ;
+ sirfport->is_hrt_enabled = false;
+ hrtimer_cancel(&sirfport->hrt);
+ }
}
static const char *sirfsoc_uart_type(struct uart_port *port)
@@ -1196,27 +1088,29 @@ sirfsoc_uart_console_setup(struct console *co, char *options)
unsigned int bits = 8;
unsigned int parity = 'n';
unsigned int flow = 'n';
- struct uart_port *port = &sirfsoc_uart_ports[co->index].port;
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
+ struct sirfsoc_uart_port *sirfport;
+ struct sirfsoc_register *ureg;
if (co->index < 0 || co->index >= SIRFSOC_UART_NR)
- return -EINVAL;
-
- if (!port->mapbase)
+ co->index = 1;
+ sirfport = sirf_ports[co->index];
+ if (!sirfport)
+ return -ENODEV;
+ ureg = &sirfport->uart_reg->uart_reg;
+ if (!sirfport->port.mapbase)
return -ENODEV;
/* enable usp in mode1 register */
if (sirfport->uart_reg->uart_type == SIRF_USP_UART)
- wr_regl(port, ureg->sirfsoc_mode1, SIRFSOC_USP_EN |
+ wr_regl(&sirfport->port, ureg->sirfsoc_mode1, SIRFSOC_USP_EN |
SIRFSOC_USP_ENDIAN_CTRL_LSBF);
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
- port->cons = co;
+ sirfport->port.cons = co;
/* default console tx/rx transfer using io mode */
sirfport->rx_dma_chan = NULL;
sirfport->tx_dma_chan = NULL;
- return uart_set_options(port, co, baud, parity, bits, flow);
+ return uart_set_options(&sirfport->port, co, baud, parity, bits, flow);
}
static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch)
@@ -1224,8 +1118,8 @@ static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch)
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status;
- while (rd_regl(port,
- ureg->sirfsoc_tx_fifo_status) & ufifo_st->ff_full(port->line))
+ while (rd_regl(port, ureg->sirfsoc_tx_fifo_status) &
+ ufifo_st->ff_full(port))
cpu_relax();
wr_regl(port, ureg->sirfsoc_tx_fifo_data, ch);
}
@@ -1233,8 +1127,10 @@ static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch)
static void sirfsoc_uart_console_write(struct console *co, const char *s,
unsigned int count)
{
- struct uart_port *port = &sirfsoc_uart_ports[co->index].port;
- uart_console_write(port, s, count, sirfsoc_uart_console_putchar);
+ struct sirfsoc_uart_port *sirfport = sirf_ports[co->index];
+
+ uart_console_write(&sirfport->port, s, count,
+ sirfsoc_uart_console_putchar);
}
static struct console sirfsoc_uart_console = {
@@ -1269,10 +1165,99 @@ static struct uart_driver sirfsoc_uart_drv = {
#endif
};
-static const struct of_device_id sirfsoc_uart_ids[] = {
+static enum hrtimer_restart
+ sirfsoc_uart_rx_dma_hrtimer_callback(struct hrtimer *hrt)
+{
+ struct sirfsoc_uart_port *sirfport;
+ struct uart_port *port;
+ int count, inserted;
+ struct dma_tx_state tx_state;
+ struct tty_struct *tty;
+ struct sirfsoc_register *ureg;
+ struct circ_buf *xmit;
+ struct sirfsoc_fifo_status *ufifo_st;
+ int max_pio_cnt;
+
+ sirfport = container_of(hrt, struct sirfsoc_uart_port, hrt);
+ port = &sirfport->port;
+ inserted = 0;
+ tty = port->state->port.tty;
+ ureg = &sirfport->uart_reg->uart_reg;
+ xmit = &sirfport->rx_dma_items.xmit;
+ ufifo_st = &sirfport->uart_reg->fifo_status;
+
+ dmaengine_tx_status(sirfport->rx_dma_chan,
+ sirfport->rx_dma_items.cookie, &tx_state);
+ if (SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue !=
+ sirfport->rx_last_pos) {
+ xmit->head = SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue;
+ sirfport->rx_last_pos = xmit->head;
+ sirfport->pio_fetch_cnt = 0;
+ }
+ count = CIRC_CNT_TO_END(xmit->head, xmit->tail,
+ SIRFSOC_RX_DMA_BUF_SIZE);
+ while (count > 0) {
+ inserted = tty_insert_flip_string(tty->port,
+ (const unsigned char *)&xmit->buf[xmit->tail], count);
+ if (!inserted)
+ goto next_hrt;
+ port->icount.rx += inserted;
+ xmit->tail = (xmit->tail + inserted) &
+ (SIRFSOC_RX_DMA_BUF_SIZE - 1);
+ count = CIRC_CNT_TO_END(xmit->head, xmit->tail,
+ SIRFSOC_RX_DMA_BUF_SIZE);
+ tty_flip_buffer_push(tty->port);
+ }
+ /*
+ * if RX DMA buffer data have all push into tty buffer, and there is
+ * only little data(less than a dma transfer unit) left in rxfifo,
+ * fetch it out in pio mode and switch back to dma immediately
+ */
+ if (!inserted && !count &&
+ ((rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
+ SIRFUART_RX_FIFO_MASK) > sirfport->pio_fetch_cnt)) {
+ dmaengine_pause(sirfport->rx_dma_chan);
+ /* switch to pio mode */
+ wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
+ rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
+ SIRFUART_IO_MODE);
+ /*
+ * UART controller SWH_DMA_IO register have CLEAR_RX_ADDR_EN
+ * When found changing I/O to DMA mode, it clears
+ * two low bits of read point;
+ * USP have similar FRADDR_CLR_EN bit in USP_RX_DMA_IO_CTRL.
+ * Fetch data out from rxfifo into DMA buffer in PIO mode,
+ * while switch back to DMA mode, the data fetched will override
+ * by DMA, as hardware have a strange behaviour:
+ * after switch back to DMA mode, check rxfifo status it will
+ * be the number PIO fetched, so record the fetched data count
+ * to avoid the repeated fetch
+ */
+ max_pio_cnt = 3;
+ while (!(rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
+ ufifo_st->ff_empty(port)) && max_pio_cnt--) {
+ xmit->buf[xmit->head] =
+ rd_regl(port, ureg->sirfsoc_rx_fifo_data);
+ xmit->head = (xmit->head + 1) &
+ (SIRFSOC_RX_DMA_BUF_SIZE - 1);
+ sirfport->pio_fetch_cnt++;
+ }
+ /* switch back to dma mode */
+ wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
+ rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) &
+ ~SIRFUART_IO_MODE);
+ dmaengine_resume(sirfport->rx_dma_chan);
+ }
+next_hrt:
+ hrtimer_forward_now(hrt, ns_to_ktime(sirfport->rx_period_time));
+ return HRTIMER_RESTART;
+}
+
+static struct of_device_id sirfsoc_uart_ids[] = {
{ .compatible = "sirf,prima2-uart", .data = &sirfsoc_uart,},
{ .compatible = "sirf,atlas7-uart", .data = &sirfsoc_uart},
{ .compatible = "sirf,prima2-usp-uart", .data = &sirfsoc_usp},
+ { .compatible = "sirf,atlas7-usp-uart", .data = &sirfsoc_usp},
{}
};
MODULE_DEVICE_TABLE(of, sirfsoc_uart_ids);
@@ -1283,9 +1268,8 @@ static int sirfsoc_uart_probe(struct platform_device *pdev)
struct uart_port *port;
struct resource *res;
int ret;
- int i, j;
struct dma_slave_config slv_cfg = {
- .src_maxburst = 2,
+ .src_maxburst = 1,
};
struct dma_slave_config tx_slv_cfg = {
.dst_maxburst = 2,
@@ -1293,16 +1277,15 @@ static int sirfsoc_uart_probe(struct platform_device *pdev)
const struct of_device_id *match;
match = of_match_node(sirfsoc_uart_ids, pdev->dev.of_node);
- if (of_property_read_u32(pdev->dev.of_node, "cell-index", &pdev->id)) {
- dev_err(&pdev->dev,
- "Unable to find cell-index in uart node.\n");
- ret = -EFAULT;
+ sirfport = devm_kzalloc(&pdev->dev, sizeof(*sirfport), GFP_KERNEL);
+ if (!sirfport) {
+ ret = -ENOMEM;
goto err;
}
- if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-usp-uart"))
- pdev->id += ((struct sirfsoc_uart_register *)
- match->data)->uart_param.register_uart_nr;
- sirfport = &sirfsoc_uart_ports[pdev->id];
+ sirfport->port.line = of_alias_get_id(pdev->dev.of_node, "serial");
+ sirf_ports[sirfport->port.line] = sirfport;
+ sirfport->port.iotype = UPIO_MEM;
+ sirfport->port.flags = UPF_BOOT_AUTOCONF;
port = &sirfport->port;
port->dev = &pdev->dev;
port->private_data = sirfport;
@@ -1310,9 +1293,12 @@ static int sirfsoc_uart_probe(struct platform_device *pdev)
sirfport->hw_flow_ctrl = of_property_read_bool(pdev->dev.of_node,
"sirf,uart-has-rtscts");
- if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-uart"))
+ if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-uart") ||
+ of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-uart"))
sirfport->uart_reg->uart_type = SIRF_REAL_UART;
- if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-usp-uart")) {
+ if (of_device_is_compatible(pdev->dev.of_node,
+ "sirf,prima2-usp-uart") || of_device_is_compatible(
+ pdev->dev.of_node, "sirf,atlas7-usp-uart")) {
sirfport->uart_reg->uart_type = SIRF_USP_UART;
if (!sirfport->hw_flow_ctrl)
goto usp_no_flow_control;
@@ -1350,7 +1336,8 @@ static int sirfsoc_uart_probe(struct platform_device *pdev)
gpio_direction_output(sirfport->rts_gpio, 1);
}
usp_no_flow_control:
- if (of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-uart"))
+ if (of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-uart") ||
+ of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-usp-uart"))
sirfport->is_atlas7 = true;
if (of_property_read_u32(pdev->dev.of_node,
@@ -1368,12 +1355,9 @@ usp_no_flow_control:
ret = -EFAULT;
goto err;
}
- tasklet_init(&sirfport->rx_dma_complete_tasklet,
- sirfsoc_uart_rx_dma_complete_tl, (unsigned long)sirfport);
- tasklet_init(&sirfport->rx_tmo_process_tasklet,
- sirfsoc_rx_tmo_process_tl, (unsigned long)sirfport);
port->mapbase = res->start;
- port->membase = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ port->membase = devm_ioremap(&pdev->dev,
+ res->start, resource_size(res));
if (!port->membase) {
dev_err(&pdev->dev, "Cannot remap resource.\n");
ret = -ENOMEM;
@@ -1393,20 +1377,6 @@ usp_no_flow_control:
goto err;
}
port->uartclk = clk_get_rate(sirfport->clk);
- if (of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-bt-uart")) {
- sirfport->clk_general = devm_clk_get(&pdev->dev, "general");
- if (IS_ERR(sirfport->clk_general)) {
- ret = PTR_ERR(sirfport->clk_general);
- goto err;
- }
- sirfport->clk_noc = devm_clk_get(&pdev->dev, "noc");
- if (IS_ERR(sirfport->clk_noc)) {
- ret = PTR_ERR(sirfport->clk_noc);
- goto err;
- }
- sirfport->is_bt_uart = true;
- } else
- sirfport->is_bt_uart = false;
port->ops = &sirfsoc_uart_ops;
spin_lock_init(&port->lock);
@@ -1419,30 +1389,32 @@ usp_no_flow_control:
}
sirfport->rx_dma_chan = dma_request_slave_channel(port->dev, "rx");
- for (i = 0; sirfport->rx_dma_chan && i < SIRFSOC_RX_LOOP_BUF_CNT; i++) {
- sirfport->rx_dma_items[i].xmit.buf =
- dma_alloc_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
- &sirfport->rx_dma_items[i].dma_addr, GFP_KERNEL);
- if (!sirfport->rx_dma_items[i].xmit.buf) {
- dev_err(port->dev, "Uart alloc bufa failed\n");
- ret = -ENOMEM;
- goto alloc_coherent_err;
- }
- sirfport->rx_dma_items[i].xmit.head =
- sirfport->rx_dma_items[i].xmit.tail = 0;
+ sirfport->rx_dma_items.xmit.buf =
+ dma_alloc_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
+ &sirfport->rx_dma_items.dma_addr, GFP_KERNEL);
+ if (!sirfport->rx_dma_items.xmit.buf) {
+ dev_err(port->dev, "Uart alloc bufa failed\n");
+ ret = -ENOMEM;
+ goto alloc_coherent_err;
}
+ sirfport->rx_dma_items.xmit.head =
+ sirfport->rx_dma_items.xmit.tail = 0;
if (sirfport->rx_dma_chan)
dmaengine_slave_config(sirfport->rx_dma_chan, &slv_cfg);
sirfport->tx_dma_chan = dma_request_slave_channel(port->dev, "tx");
if (sirfport->tx_dma_chan)
dmaengine_slave_config(sirfport->tx_dma_chan, &tx_slv_cfg);
+ if (sirfport->rx_dma_chan) {
+ hrtimer_init(&sirfport->hrt, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ sirfport->hrt.function = sirfsoc_uart_rx_dma_hrtimer_callback;
+ sirfport->is_hrt_enabled = false;
+ }
return 0;
alloc_coherent_err:
- for (j = 0; j < i; j++)
- dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
- sirfport->rx_dma_items[j].xmit.buf,
- sirfport->rx_dma_items[j].dma_addr);
+ dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
+ sirfport->rx_dma_items.xmit.buf,
+ sirfport->rx_dma_items.dma_addr);
dma_release_channel(sirfport->rx_dma_chan);
err:
return ret;
@@ -1454,13 +1426,11 @@ static int sirfsoc_uart_remove(struct platform_device *pdev)
struct uart_port *port = &sirfport->port;
uart_remove_one_port(&sirfsoc_uart_drv, port);
if (sirfport->rx_dma_chan) {
- int i;
dmaengine_terminate_all(sirfport->rx_dma_chan);
dma_release_channel(sirfport->rx_dma_chan);
- for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++)
- dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
- sirfport->rx_dma_items[i].xmit.buf,
- sirfport->rx_dma_items[i].dma_addr);
+ dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
+ sirfport->rx_dma_items.xmit.buf,
+ sirfport->rx_dma_items.dma_addr);
}
if (sirfport->tx_dma_chan) {
dmaengine_terminate_all(sirfport->tx_dma_chan);
diff --git a/kernel/drivers/tty/serial/sirfsoc_uart.h b/kernel/drivers/tty/serial/sirfsoc_uart.h
index 727eb6b88..c3a885b4d 100644
--- a/kernel/drivers/tty/serial/sirfsoc_uart.h
+++ b/kernel/drivers/tty/serial/sirfsoc_uart.h
@@ -6,11 +6,11 @@
* Licensed under GPLv2 or later.
*/
#include <linux/bitops.h>
+#include <linux/log2.h>
+#include <linux/hrtimer.h>
struct sirfsoc_uart_param {
const char *uart_name;
const char *port_name;
- u32 uart_nr;
- u32 register_uart_nr;
};
struct sirfsoc_register {
@@ -21,6 +21,7 @@ struct sirfsoc_register {
u32 sirfsoc_tx_rx_en;
u32 sirfsoc_int_en_reg;
u32 sirfsoc_int_st_reg;
+ u32 sirfsoc_int_en_clr_reg;
u32 sirfsoc_tx_dma_io_ctrl;
u32 sirfsoc_tx_dma_io_len;
u32 sirfsoc_tx_fifo_ctrl;
@@ -45,8 +46,8 @@ struct sirfsoc_register {
u32 sirfsoc_async_param_reg;
};
-typedef u32 (*fifo_full_mask)(int line);
-typedef u32 (*fifo_empty_mask)(int line);
+typedef u32 (*fifo_full_mask)(struct uart_port *port);
+typedef u32 (*fifo_empty_mask)(struct uart_port *port);
struct sirfsoc_fifo_status {
fifo_full_mask ff_full;
@@ -105,21 +106,20 @@ struct sirfsoc_uart_register {
enum sirfsoc_uart_type uart_type;
};
-u32 usp_ff_full(int line)
+u32 uart_usp_ff_full_mask(struct uart_port *port)
{
- return 0x80;
-}
-u32 usp_ff_empty(int line)
-{
- return 0x100;
-}
-u32 uart_ff_full(int line)
-{
- return (line == 1) ? (0x20) : (0x80);
+ u32 full_bit;
+
+ full_bit = ilog2(port->fifosize);
+ return (1 << full_bit);
}
-u32 uart_ff_empty(int line)
+
+u32 uart_usp_ff_empty_mask(struct uart_port *port)
{
- return (line == 1) ? (0x40) : (0x100);
+ u32 empty_bit;
+
+ empty_bit = ilog2(port->fifosize) + 1;
+ return (1 << empty_bit);
}
struct sirfsoc_uart_register sirfsoc_usp = {
.uart_reg = {
@@ -145,6 +145,7 @@ struct sirfsoc_uart_register sirfsoc_usp = {
.sirfsoc_rx_fifo_op = 0x0130,
.sirfsoc_rx_fifo_status = 0x0134,
.sirfsoc_rx_fifo_data = 0x0138,
+ .sirfsoc_int_en_clr_reg = 0x140,
},
.uart_int_en = {
.sirfsoc_rx_done_en = BIT(0),
@@ -177,14 +178,12 @@ struct sirfsoc_uart_register sirfsoc_usp = {
.sirfsoc_rxd_brk = BIT(15),
},
.fifo_status = {
- .ff_full = usp_ff_full,
- .ff_empty = usp_ff_empty,
+ .ff_full = uart_usp_ff_full_mask,
+ .ff_empty = uart_usp_ff_empty_mask,
},
.uart_param = {
.uart_name = "ttySiRF",
.port_name = "sirfsoc-uart",
- .uart_nr = 2,
- .register_uart_nr = 3,
},
};
@@ -195,6 +194,7 @@ struct sirfsoc_uart_register sirfsoc_uart = {
.sirfsoc_divisor = 0x0050,
.sirfsoc_int_en_reg = 0x0054,
.sirfsoc_int_st_reg = 0x0058,
+ .sirfsoc_int_en_clr_reg = 0x0060,
.sirfsoc_tx_dma_io_ctrl = 0x0100,
.sirfsoc_tx_dma_io_len = 0x0104,
.sirfsoc_tx_fifo_ctrl = 0x0108,
@@ -249,14 +249,12 @@ struct sirfsoc_uart_register sirfsoc_uart = {
.sirfsoc_rts = BIT(15),
},
.fifo_status = {
- .ff_full = uart_ff_full,
- .ff_empty = uart_ff_empty,
+ .ff_full = uart_usp_ff_full_mask,
+ .ff_empty = uart_usp_ff_empty_mask,
},
.uart_param = {
.uart_name = "ttySiRF",
.port_name = "sirfsoc_uart",
- .uart_nr = 3,
- .register_uart_nr = 0,
},
};
/* uart io ctrl */
@@ -296,10 +294,11 @@ struct sirfsoc_uart_register sirfsoc_uart = {
#define SIRFUART_IO_MODE BIT(0)
#define SIRFUART_DMA_MODE 0x0
+#define SIRFUART_RX_DMA_FLUSH 0x4
-/* Macro Specific*/
-#define SIRFUART_INT_EN_CLR 0x0060
+#define SIRFUART_CLEAR_RX_ADDR_EN 0x2
/* Baud Rate Calculation */
+#define SIRF_USP_MIN_SAMPLE_DIV 0x1
#define SIRF_MIN_SAMPLE_DIV 0xf
#define SIRF_MAX_SAMPLE_DIV 0x3f
#define SIRF_IOCLK_DIV_MAX 0xffff
@@ -326,55 +325,55 @@ struct sirfsoc_uart_register sirfsoc_uart = {
#define SIRFSOC_USP_RX_CLK_DIVISOR_OFFSET 24
#define SIRFSOC_USP_ASYNC_DIV2_MASK 0x3f
#define SIRFSOC_USP_ASYNC_DIV2_OFFSET 16
-
+#define SIRFSOC_USP_LOOP_BACK_CTRL BIT(2)
+#define SIRFSOC_USP_FRADDR_CLR_EN BIT(1)
/* USP-UART Common */
#define SIRFSOC_UART_RX_TIMEOUT(br, to) (((br) * (((to) + 999) / 1000)) / 1000)
#define SIRFUART_RECV_TIMEOUT_VALUE(x) \
(((x) > 0xFFFF) ? 0xFFFF : ((x) & 0xFFFF))
-#define SIRFUART_RECV_TIMEOUT(port, x) \
- (((port)->line > 2) ? (x & 0xFFFF) : ((x) & 0xFFFF) << 16)
+#define SIRFUART_USP_RECV_TIMEOUT(x) (x & 0xFFFF)
+#define SIRFUART_UART_RECV_TIMEOUT(x) ((x & 0xFFFF) << 16)
-#define SIRFUART_FIFO_THD(port) ((port->line) == 1 ? 16 : 64)
-#define SIRFUART_ERR_INT_STAT(port, unit_st) \
+#define SIRFUART_FIFO_THD(port) (port->fifosize >> 1)
+#define SIRFUART_ERR_INT_STAT(unit_st, uart_type) \
(uint_st->sirfsoc_rx_oflow | \
uint_st->sirfsoc_frm_err | \
uint_st->sirfsoc_rxd_brk | \
- ((port->line > 2) ? 0 : uint_st->sirfsoc_parity_err))
-#define SIRFUART_RX_IO_INT_EN(port, uint_en) \
- (uint_en->sirfsoc_rx_timeout_en |\
+ ((uart_type != SIRF_REAL_UART) ? \
+ 0 : uint_st->sirfsoc_parity_err))
+#define SIRFUART_RX_IO_INT_EN(uint_en, uart_type) \
+ (uint_en->sirfsoc_rx_done_en |\
uint_en->sirfsoc_rxfifo_thd_en |\
uint_en->sirfsoc_rxfifo_full_en |\
uint_en->sirfsoc_frm_err_en |\
uint_en->sirfsoc_rx_oflow_en |\
uint_en->sirfsoc_rxd_brk_en |\
- ((port->line > 2) ? 0 : uint_en->sirfsoc_parity_err_en))
+ ((uart_type != SIRF_REAL_UART) ? \
+ 0 : uint_en->sirfsoc_parity_err_en))
#define SIRFUART_RX_IO_INT_ST(uint_st) \
- (uint_st->sirfsoc_rx_timeout |\
- uint_st->sirfsoc_rxfifo_thd |\
- uint_st->sirfsoc_rxfifo_full)
+ (uint_st->sirfsoc_rxfifo_thd |\
+ uint_st->sirfsoc_rxfifo_full|\
+ uint_st->sirfsoc_rx_done |\
+ uint_st->sirfsoc_rx_timeout)
#define SIRFUART_CTS_INT_ST(uint_st) (uint_st->sirfsoc_cts)
-#define SIRFUART_RX_DMA_INT_EN(port, uint_en) \
- (uint_en->sirfsoc_rx_timeout_en |\
- uint_en->sirfsoc_frm_err_en |\
+#define SIRFUART_RX_DMA_INT_EN(uint_en, uart_type) \
+ (uint_en->sirfsoc_frm_err_en |\
uint_en->sirfsoc_rx_oflow_en |\
uint_en->sirfsoc_rxd_brk_en |\
- ((port->line > 2) ? 0 : uint_en->sirfsoc_parity_err_en))
+ ((uart_type != SIRF_REAL_UART) ? \
+ 0 : uint_en->sirfsoc_parity_err_en))
/* Generic Definitions */
#define SIRFSOC_UART_NAME "ttySiRF"
#define SIRFSOC_UART_MAJOR 0
#define SIRFSOC_UART_MINOR 0
#define SIRFUART_PORT_NAME "sirfsoc-uart"
#define SIRFUART_MAP_SIZE 0x200
-#define SIRFSOC_UART_NR 6
+#define SIRFSOC_UART_NR 11
#define SIRFSOC_PORT_TYPE 0xa5
/* Uart Common Use Macro*/
-#define SIRFSOC_RX_DMA_BUF_SIZE 256
+#define SIRFSOC_RX_DMA_BUF_SIZE (1024 * 32)
#define BYTES_TO_ALIGN(dma_addr) ((unsigned long)(dma_addr) & 0x3)
-#define LOOP_DMA_BUFA_FILL 1
-#define LOOP_DMA_BUFB_FILL 2
-#define TX_TRAN_PIO 1
-#define TX_TRAN_DMA 2
/* Uart Fifo Level Chk */
#define SIRFUART_TX_FIFO_SC_OFFSET 0
#define SIRFUART_TX_FIFO_LC_OFFSET 10
@@ -389,8 +388,8 @@ struct sirfsoc_uart_register sirfsoc_uart = {
#define SIRFUART_RX_FIFO_CHK_SC SIRFUART_TX_FIFO_CHK_SC
#define SIRFUART_RX_FIFO_CHK_LC SIRFUART_TX_FIFO_CHK_LC
#define SIRFUART_RX_FIFO_CHK_HC SIRFUART_TX_FIFO_CHK_HC
+#define SIRFUART_RX_FIFO_MASK 0x7f
/* Indicate how many buffers used */
-#define SIRFSOC_RX_LOOP_BUF_CNT 2
/* For Fast Baud Rate Calculation */
struct sirfsoc_baudrate_to_regv {
@@ -404,7 +403,7 @@ enum sirfsoc_tx_state {
TX_DMA_PAUSE,
};
-struct sirfsoc_loop_buffer {
+struct sirfsoc_rx_buffer {
struct circ_buf xmit;
dma_cookie_t cookie;
struct dma_async_tx_descriptor *desc;
@@ -417,10 +416,6 @@ struct sirfsoc_uart_port {
struct uart_port port;
struct clk *clk;
- /* UART6 for BT usage in A7DA platform need multi-clock source */
- bool is_bt_uart;
- struct clk *clk_general;
- struct clk *clk_noc;
/* for SiRFatlas7, there are SET/CLR for UART_INT_EN */
bool is_atlas7;
struct sirfsoc_uart_register *uart_reg;
@@ -428,17 +423,17 @@ struct sirfsoc_uart_port {
struct dma_chan *tx_dma_chan;
dma_addr_t tx_dma_addr;
struct dma_async_tx_descriptor *tx_dma_desc;
- struct tasklet_struct rx_dma_complete_tasklet;
- struct tasklet_struct rx_tmo_process_tasklet;
- unsigned int rx_io_count;
unsigned long transfer_size;
enum sirfsoc_tx_state tx_dma_state;
unsigned int cts_gpio;
unsigned int rts_gpio;
- struct sirfsoc_loop_buffer rx_dma_items[SIRFSOC_RX_LOOP_BUF_CNT];
- int rx_completed;
- int rx_issued;
+ struct sirfsoc_rx_buffer rx_dma_items;
+ struct hrtimer hrt;
+ bool is_hrt_enabled;
+ unsigned long rx_period_time;
+ unsigned long rx_last_pos;
+ unsigned long pio_fetch_cnt;
};
/* Register Access Control */
@@ -447,10 +442,6 @@ struct sirfsoc_uart_port {
#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
/* UART Port Mask */
-#define SIRFUART_FIFOLEVEL_MASK(port) ((port->line == 1) ? (0x1f) : (0x7f))
-#define SIRFUART_FIFOFULL_MASK(port) ((port->line == 1) ? (0x20) : (0x80))
-#define SIRFUART_FIFOEMPTY_MASK(port) ((port->line == 1) ? (0x40) : (0x100))
-
-/* I/O Mode */
-#define SIRFSOC_UART_IO_RX_MAX_CNT 256
-#define SIRFSOC_UART_IO_TX_REASONABLE_CNT 256
+#define SIRFUART_FIFOLEVEL_MASK(port) ((port->fifosize - 1) & 0xFFF)
+#define SIRFUART_FIFOFULL_MASK(port) (port->fifosize & 0xFFF)
+#define SIRFUART_FIFOEMPTY_MASK(port) ((port->fifosize & 0xFFF) << 1)
diff --git a/kernel/drivers/tty/serial/sn_console.c b/kernel/drivers/tty/serial/sn_console.c
index 33e94e56d..d4692d888 100644
--- a/kernel/drivers/tty/serial/sn_console.c
+++ b/kernel/drivers/tty/serial/sn_console.c
@@ -42,7 +42,7 @@
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/console.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/sysrq.h>
#include <linux/circ_buf.h>
#include <linux/serial_reg.h>
@@ -659,7 +659,7 @@ static void sn_sal_timer_poll(unsigned long data)
* @port: Our sn_cons_port (which contains the uart port)
*
* So this is used by sn_sal_serial_console_init (early on, before we're
- * registered with serial core). It's also used by sn_sal_module_init
+ * registered with serial core). It's also used by sn_sal_init
* right after we've registered with serial core. The later only happens
* if we didn't already come through here via sn_sal_serial_console_init.
*
@@ -709,7 +709,7 @@ static void __init sn_sal_switch_to_asynch(struct sn_cons_port *port)
* sn_sal_switch_to_interrupts - Switch to interrupt driven mode
* @port: Our sn_cons_port (which contains the uart port)
*
- * In sn_sal_module_init, after we're registered with serial core and
+ * In sn_sal_init, after we're registered with serial core and
* the port is added, this function is called to switch us to interrupt
* mode. We were previously in asynch/polling mode (using init_timer).
*
@@ -773,7 +773,7 @@ static struct uart_driver sal_console_uart = {
};
/**
- * sn_sal_module_init - When the kernel loads us, get us rolling w/ serial core
+ * sn_sal_init - When the kernel loads us, get us rolling w/ serial core
*
* Before this is called, we've been printing kernel messages in a special
* early mode not making use of the serial core infrastructure. When our
@@ -781,7 +781,7 @@ static struct uart_driver sal_console_uart = {
* core and try to enable interrupt driven mode.
*
*/
-static int __init sn_sal_module_init(void)
+static int __init sn_sal_init(void)
{
int retval;
@@ -811,7 +811,7 @@ static int __init sn_sal_module_init(void)
if (uart_register_driver(&sal_console_uart) < 0) {
printk
- ("ERROR sn_sal_module_init failed uart_register_driver, line %d\n",
+ ("ERROR sn_sal_init failed uart_register_driver, line %d\n",
__LINE__);
return -ENODEV;
}
@@ -832,33 +832,19 @@ static int __init sn_sal_module_init(void)
/* when this driver is compiled in, the console initialization
* will have already switched us into asynchronous operation
- * before we get here through the module initcalls */
+ * before we get here through the initcalls */
if (!sal_console_port.sc_is_asynch) {
sn_sal_switch_to_asynch(&sal_console_port);
}
- /* at this point (module_init) we can try to turn on interrupts */
+ /* at this point (device_init) we can try to turn on interrupts */
if (!IS_RUNNING_ON_SIMULATOR()) {
sn_sal_switch_to_interrupts(&sal_console_port);
}
sn_process_input = 1;
return 0;
}
-
-/**
- * sn_sal_module_exit - When we're unloaded, remove the driver/port
- *
- */
-static void __exit sn_sal_module_exit(void)
-{
- del_timer_sync(&sal_console_port.sc_timer);
- uart_remove_one_port(&sal_console_uart, &sal_console_port.sc_port);
- uart_unregister_driver(&sal_console_uart);
- misc_deregister(&misc);
-}
-
-module_init(sn_sal_module_init);
-module_exit(sn_sal_module_exit);
+device_initcall(sn_sal_init);
/**
* puts_raw_fixed - sn_sal_console_write helper for adding \r's as required
diff --git a/kernel/drivers/tty/serial/sprd_serial.c b/kernel/drivers/tty/serial/sprd_serial.c
index 582d2729f..9dbae01d4 100644
--- a/kernel/drivers/tty/serial/sprd_serial.c
+++ b/kernel/drivers/tty/serial/sprd_serial.c
@@ -716,7 +716,7 @@ static int sprd_probe(struct platform_device *pdev)
up->flags = UPF_BOOT_AUTOCONF;
clk = devm_clk_get(&pdev->dev, NULL);
- if (!IS_ERR(clk))
+ if (!IS_ERR_OR_NULL(clk))
up->uartclk = clk_get_rate(clk);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -782,6 +782,7 @@ static const struct of_device_id serial_ids[] = {
{.compatible = "sprd,sc9836-uart",},
{}
};
+MODULE_DEVICE_TABLE(of, serial_ids);
static struct platform_driver sprd_platform_driver = {
.probe = sprd_probe,
diff --git a/kernel/drivers/tty/serial/st-asc.c b/kernel/drivers/tty/serial/st-asc.c
index d625664ce..2d78cb362 100644
--- a/kernel/drivers/tty/serial/st-asc.c
+++ b/kernel/drivers/tty/serial/st-asc.c
@@ -430,7 +430,7 @@ static void asc_break_ctl(struct uart_port *port, int break_state)
*/
static int asc_startup(struct uart_port *port)
{
- if (request_irq(port->irq, asc_interrupt, IRQF_NO_SUSPEND,
+ if (request_irq(port->irq, asc_interrupt, 0,
asc_port_name(port), port)) {
dev_err(port->dev, "cannot allocate irq.\n");
return -ENODEV;
diff --git a/kernel/drivers/tty/serial/stm32-usart.c b/kernel/drivers/tty/serial/stm32-usart.c
new file mode 100644
index 000000000..f89d1f79b
--- /dev/null
+++ b/kernel/drivers/tty/serial/stm32-usart.c
@@ -0,0 +1,738 @@
+/*
+ * Copyright (C) Maxime Coquelin 2015
+ * Author: Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ * License terms: GNU General Public License (GPL), version 2
+ *
+ * Inspired by st-asc.c from STMicroelectronics (c)
+ */
+
+#if defined(CONFIG_SERIAL_STM32_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/serial_core.h>
+#include <linux/clk.h>
+
+#define DRIVER_NAME "stm32-usart"
+
+/* Register offsets */
+#define USART_SR 0x00
+#define USART_DR 0x04
+#define USART_BRR 0x08
+#define USART_CR1 0x0c
+#define USART_CR2 0x10
+#define USART_CR3 0x14
+#define USART_GTPR 0x18
+
+/* USART_SR */
+#define USART_SR_PE BIT(0)
+#define USART_SR_FE BIT(1)
+#define USART_SR_NF BIT(2)
+#define USART_SR_ORE BIT(3)
+#define USART_SR_IDLE BIT(4)
+#define USART_SR_RXNE BIT(5)
+#define USART_SR_TC BIT(6)
+#define USART_SR_TXE BIT(7)
+#define USART_SR_LBD BIT(8)
+#define USART_SR_CTS BIT(9)
+#define USART_SR_ERR_MASK (USART_SR_LBD | USART_SR_ORE | \
+ USART_SR_FE | USART_SR_PE)
+/* Dummy bits */
+#define USART_SR_DUMMY_RX BIT(16)
+
+/* USART_DR */
+#define USART_DR_MASK GENMASK(8, 0)
+
+/* USART_BRR */
+#define USART_BRR_DIV_F_MASK GENMASK(3, 0)
+#define USART_BRR_DIV_M_MASK GENMASK(15, 4)
+#define USART_BRR_DIV_M_SHIFT 4
+
+/* USART_CR1 */
+#define USART_CR1_SBK BIT(0)
+#define USART_CR1_RWU BIT(1)
+#define USART_CR1_RE BIT(2)
+#define USART_CR1_TE BIT(3)
+#define USART_CR1_IDLEIE BIT(4)
+#define USART_CR1_RXNEIE BIT(5)
+#define USART_CR1_TCIE BIT(6)
+#define USART_CR1_TXEIE BIT(7)
+#define USART_CR1_PEIE BIT(8)
+#define USART_CR1_PS BIT(9)
+#define USART_CR1_PCE BIT(10)
+#define USART_CR1_WAKE BIT(11)
+#define USART_CR1_M BIT(12)
+#define USART_CR1_UE BIT(13)
+#define USART_CR1_OVER8 BIT(15)
+#define USART_CR1_IE_MASK GENMASK(8, 4)
+
+/* USART_CR2 */
+#define USART_CR2_ADD_MASK GENMASK(3, 0)
+#define USART_CR2_LBDL BIT(5)
+#define USART_CR2_LBDIE BIT(6)
+#define USART_CR2_LBCL BIT(8)
+#define USART_CR2_CPHA BIT(9)
+#define USART_CR2_CPOL BIT(10)
+#define USART_CR2_CLKEN BIT(11)
+#define USART_CR2_STOP_2B BIT(13)
+#define USART_CR2_STOP_MASK GENMASK(13, 12)
+#define USART_CR2_LINEN BIT(14)
+
+/* USART_CR3 */
+#define USART_CR3_EIE BIT(0)
+#define USART_CR3_IREN BIT(1)
+#define USART_CR3_IRLP BIT(2)
+#define USART_CR3_HDSEL BIT(3)
+#define USART_CR3_NACK BIT(4)
+#define USART_CR3_SCEN BIT(5)
+#define USART_CR3_DMAR BIT(6)
+#define USART_CR3_DMAT BIT(7)
+#define USART_CR3_RTSE BIT(8)
+#define USART_CR3_CTSE BIT(9)
+#define USART_CR3_CTSIE BIT(10)
+#define USART_CR3_ONEBIT BIT(11)
+
+/* USART_GTPR */
+#define USART_GTPR_PSC_MASK GENMASK(7, 0)
+#define USART_GTPR_GT_MASK GENMASK(15, 8)
+
+#define DRIVER_NAME "stm32-usart"
+#define STM32_SERIAL_NAME "ttyS"
+#define STM32_MAX_PORTS 6
+
+struct stm32_port {
+ struct uart_port port;
+ struct clk *clk;
+ bool hw_flow_control;
+};
+
+static struct stm32_port stm32_ports[STM32_MAX_PORTS];
+static struct uart_driver stm32_usart_driver;
+
+static void stm32_stop_tx(struct uart_port *port);
+
+static inline struct stm32_port *to_stm32_port(struct uart_port *port)
+{
+ return container_of(port, struct stm32_port, port);
+}
+
+static void stm32_set_bits(struct uart_port *port, u32 reg, u32 bits)
+{
+ u32 val;
+
+ val = readl_relaxed(port->membase + reg);
+ val |= bits;
+ writel_relaxed(val, port->membase + reg);
+}
+
+static void stm32_clr_bits(struct uart_port *port, u32 reg, u32 bits)
+{
+ u32 val;
+
+ val = readl_relaxed(port->membase + reg);
+ val &= ~bits;
+ writel_relaxed(val, port->membase + reg);
+}
+
+static void stm32_receive_chars(struct uart_port *port)
+{
+ struct tty_port *tport = &port->state->port;
+ unsigned long c;
+ u32 sr;
+ char flag;
+
+ if (port->irq_wake)
+ pm_wakeup_event(tport->tty->dev, 0);
+
+ while ((sr = readl_relaxed(port->membase + USART_SR)) & USART_SR_RXNE) {
+ sr |= USART_SR_DUMMY_RX;
+ c = readl_relaxed(port->membase + USART_DR);
+ flag = TTY_NORMAL;
+ port->icount.rx++;
+
+ if (sr & USART_SR_ERR_MASK) {
+ if (sr & USART_SR_LBD) {
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ continue;
+ } else if (sr & USART_SR_ORE) {
+ port->icount.overrun++;
+ } else if (sr & USART_SR_PE) {
+ port->icount.parity++;
+ } else if (sr & USART_SR_FE) {
+ port->icount.frame++;
+ }
+
+ sr &= port->read_status_mask;
+
+ if (sr & USART_SR_LBD)
+ flag = TTY_BREAK;
+ else if (sr & USART_SR_PE)
+ flag = TTY_PARITY;
+ else if (sr & USART_SR_FE)
+ flag = TTY_FRAME;
+ }
+
+ if (uart_handle_sysrq_char(port, c))
+ continue;
+ uart_insert_char(port, sr, USART_SR_ORE, c, flag);
+ }
+
+ spin_unlock(&port->lock);
+ tty_flip_buffer_push(tport);
+ spin_lock(&port->lock);
+}
+
+static void stm32_transmit_chars(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->state->xmit;
+
+ if (port->x_char) {
+ writel_relaxed(port->x_char, port->membase + USART_DR);
+ port->x_char = 0;
+ port->icount.tx++;
+ return;
+ }
+
+ if (uart_tx_stopped(port)) {
+ stm32_stop_tx(port);
+ return;
+ }
+
+ if (uart_circ_empty(xmit)) {
+ stm32_stop_tx(port);
+ return;
+ }
+
+ writel_relaxed(xmit->buf[xmit->tail], port->membase + USART_DR);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ stm32_stop_tx(port);
+}
+
+static irqreturn_t stm32_interrupt(int irq, void *ptr)
+{
+ struct uart_port *port = ptr;
+ u32 sr;
+
+ spin_lock(&port->lock);
+
+ sr = readl_relaxed(port->membase + USART_SR);
+
+ if (sr & USART_SR_RXNE)
+ stm32_receive_chars(port);
+
+ if (sr & USART_SR_TXE)
+ stm32_transmit_chars(port);
+
+ spin_unlock(&port->lock);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int stm32_tx_empty(struct uart_port *port)
+{
+ return readl_relaxed(port->membase + USART_SR) & USART_SR_TXE;
+}
+
+static void stm32_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS))
+ stm32_set_bits(port, USART_CR3, USART_CR3_RTSE);
+ else
+ stm32_clr_bits(port, USART_CR3, USART_CR3_RTSE);
+}
+
+static unsigned int stm32_get_mctrl(struct uart_port *port)
+{
+ /* This routine is used to get signals of: DCD, DSR, RI, and CTS */
+ return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
+}
+
+/* Transmit stop */
+static void stm32_stop_tx(struct uart_port *port)
+{
+ stm32_clr_bits(port, USART_CR1, USART_CR1_TXEIE);
+}
+
+/* There are probably characters waiting to be transmitted. */
+static void stm32_start_tx(struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->state->xmit;
+
+ if (uart_circ_empty(xmit))
+ return;
+
+ stm32_set_bits(port, USART_CR1, USART_CR1_TXEIE | USART_CR1_TE);
+}
+
+/* Throttle the remote when input buffer is about to overflow. */
+static void stm32_throttle(struct uart_port *port)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ stm32_clr_bits(port, USART_CR1, USART_CR1_RXNEIE);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* Unthrottle the remote, the input buffer can now accept data. */
+static void stm32_unthrottle(struct uart_port *port)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ stm32_set_bits(port, USART_CR1, USART_CR1_RXNEIE);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* Receive stop */
+static void stm32_stop_rx(struct uart_port *port)
+{
+ stm32_clr_bits(port, USART_CR1, USART_CR1_RXNEIE);
+}
+
+/* Handle breaks - ignored by us */
+static void stm32_break_ctl(struct uart_port *port, int break_state)
+{
+}
+
+static int stm32_startup(struct uart_port *port)
+{
+ const char *name = to_platform_device(port->dev)->name;
+ u32 val;
+ int ret;
+
+ ret = request_irq(port->irq, stm32_interrupt, 0, name, port);
+ if (ret)
+ return ret;
+
+ val = USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE;
+ stm32_set_bits(port, USART_CR1, val);
+
+ return 0;
+}
+
+static void stm32_shutdown(struct uart_port *port)
+{
+ u32 val;
+
+ val = USART_CR1_TXEIE | USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE;
+ stm32_set_bits(port, USART_CR1, val);
+
+ free_irq(port->irq, port);
+}
+
+static void stm32_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct stm32_port *stm32_port = to_stm32_port(port);
+ unsigned int baud;
+ u32 usartdiv, mantissa, fraction, oversampling;
+ tcflag_t cflag = termios->c_cflag;
+ u32 cr1, cr2, cr3;
+ unsigned long flags;
+
+ if (!stm32_port->hw_flow_control)
+ cflag &= ~CRTSCTS;
+
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 8);
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* Stop serial port and reset value */
+ writel_relaxed(0, port->membase + USART_CR1);
+
+ cr1 = USART_CR1_TE | USART_CR1_RE | USART_CR1_UE | USART_CR1_RXNEIE;
+ cr2 = 0;
+ cr3 = 0;
+
+ if (cflag & CSTOPB)
+ cr2 |= USART_CR2_STOP_2B;
+
+ if (cflag & PARENB) {
+ cr1 |= USART_CR1_PCE;
+ if ((cflag & CSIZE) == CS8)
+ cr1 |= USART_CR1_M;
+ }
+
+ if (cflag & PARODD)
+ cr1 |= USART_CR1_PS;
+
+ port->status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS);
+ if (cflag & CRTSCTS) {
+ port->status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS;
+ cr3 |= USART_CR3_CTSE;
+ }
+
+ usartdiv = DIV_ROUND_CLOSEST(port->uartclk, baud);
+
+ /*
+ * The USART supports 16 or 8 times oversampling.
+ * By default we prefer 16 times oversampling, so that the receiver
+ * has a better tolerance to clock deviations.
+ * 8 times oversampling is only used to achieve higher speeds.
+ */
+ if (usartdiv < 16) {
+ oversampling = 8;
+ stm32_set_bits(port, USART_CR1, USART_CR1_OVER8);
+ } else {
+ oversampling = 16;
+ stm32_clr_bits(port, USART_CR1, USART_CR1_OVER8);
+ }
+
+ mantissa = (usartdiv / oversampling) << USART_BRR_DIV_M_SHIFT;
+ fraction = usartdiv % oversampling;
+ writel_relaxed(mantissa | fraction, port->membase + USART_BRR);
+
+ uart_update_timeout(port, cflag, baud);
+
+ port->read_status_mask = USART_SR_ORE;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= USART_SR_PE | USART_SR_FE;
+ if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
+ port->read_status_mask |= USART_SR_LBD;
+
+ /* Characters to ignore */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask = USART_SR_PE | USART_SR_FE;
+ if (termios->c_iflag & IGNBRK) {
+ port->ignore_status_mask |= USART_SR_LBD;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= USART_SR_ORE;
+ }
+
+ /* Ignore all characters if CREAD is not set */
+ if ((termios->c_cflag & CREAD) == 0)
+ port->ignore_status_mask |= USART_SR_DUMMY_RX;
+
+ writel_relaxed(cr3, port->membase + USART_CR3);
+ writel_relaxed(cr2, port->membase + USART_CR2);
+ writel_relaxed(cr1, port->membase + USART_CR1);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *stm32_type(struct uart_port *port)
+{
+ return (port->type == PORT_STM32) ? DRIVER_NAME : NULL;
+}
+
+static void stm32_release_port(struct uart_port *port)
+{
+}
+
+static int stm32_request_port(struct uart_port *port)
+{
+ return 0;
+}
+
+static void stm32_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE)
+ port->type = PORT_STM32;
+}
+
+static int
+stm32_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ /* No user changeable parameters */
+ return -EINVAL;
+}
+
+static void stm32_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct stm32_port *stm32port = container_of(port,
+ struct stm32_port, port);
+ unsigned long flags = 0;
+
+ switch (state) {
+ case UART_PM_STATE_ON:
+ clk_prepare_enable(stm32port->clk);
+ break;
+ case UART_PM_STATE_OFF:
+ spin_lock_irqsave(&port->lock, flags);
+ stm32_clr_bits(port, USART_CR1, USART_CR1_UE);
+ spin_unlock_irqrestore(&port->lock, flags);
+ clk_disable_unprepare(stm32port->clk);
+ break;
+ }
+}
+
+static const struct uart_ops stm32_uart_ops = {
+ .tx_empty = stm32_tx_empty,
+ .set_mctrl = stm32_set_mctrl,
+ .get_mctrl = stm32_get_mctrl,
+ .stop_tx = stm32_stop_tx,
+ .start_tx = stm32_start_tx,
+ .throttle = stm32_throttle,
+ .unthrottle = stm32_unthrottle,
+ .stop_rx = stm32_stop_rx,
+ .break_ctl = stm32_break_ctl,
+ .startup = stm32_startup,
+ .shutdown = stm32_shutdown,
+ .set_termios = stm32_set_termios,
+ .pm = stm32_pm,
+ .type = stm32_type,
+ .release_port = stm32_release_port,
+ .request_port = stm32_request_port,
+ .config_port = stm32_config_port,
+ .verify_port = stm32_verify_port,
+};
+
+static int stm32_init_port(struct stm32_port *stm32port,
+ struct platform_device *pdev)
+{
+ struct uart_port *port = &stm32port->port;
+ struct resource *res;
+ int ret;
+
+ port->iotype = UPIO_MEM;
+ port->flags = UPF_BOOT_AUTOCONF;
+ port->ops = &stm32_uart_ops;
+ port->dev = &pdev->dev;
+ port->irq = platform_get_irq(pdev, 0);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ port->membase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(port->membase))
+ return PTR_ERR(port->membase);
+ port->mapbase = res->start;
+
+ spin_lock_init(&port->lock);
+
+ stm32port->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(stm32port->clk))
+ return PTR_ERR(stm32port->clk);
+
+ /* Ensure that clk rate is correct by enabling the clk */
+ ret = clk_prepare_enable(stm32port->clk);
+ if (ret)
+ return ret;
+
+ stm32port->port.uartclk = clk_get_rate(stm32port->clk);
+ if (!stm32port->port.uartclk)
+ ret = -EINVAL;
+
+ clk_disable_unprepare(stm32port->clk);
+
+ return ret;
+}
+
+static struct stm32_port *stm32_of_get_stm32_port(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int id;
+
+ if (!np)
+ return NULL;
+
+ id = of_alias_get_id(np, "serial");
+ if (id < 0)
+ id = 0;
+
+ if (WARN_ON(id >= STM32_MAX_PORTS))
+ return NULL;
+
+ stm32_ports[id].hw_flow_control = of_property_read_bool(np,
+ "auto-flow-control");
+ stm32_ports[id].port.line = id;
+ return &stm32_ports[id];
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id stm32_match[] = {
+ { .compatible = "st,stm32-usart", },
+ { .compatible = "st,stm32-uart", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, stm32_match);
+#endif
+
+static int stm32_serial_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct stm32_port *stm32port;
+
+ stm32port = stm32_of_get_stm32_port(pdev);
+ if (!stm32port)
+ return -ENODEV;
+
+ ret = stm32_init_port(stm32port, pdev);
+ if (ret)
+ return ret;
+
+ ret = uart_add_one_port(&stm32_usart_driver, &stm32port->port);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, &stm32port->port);
+
+ return 0;
+}
+
+static int stm32_serial_remove(struct platform_device *pdev)
+{
+ struct uart_port *port = platform_get_drvdata(pdev);
+
+ return uart_remove_one_port(&stm32_usart_driver, port);
+}
+
+
+#ifdef CONFIG_SERIAL_STM32_CONSOLE
+static void stm32_console_putchar(struct uart_port *port, int ch)
+{
+ while (!(readl_relaxed(port->membase + USART_SR) & USART_SR_TXE))
+ cpu_relax();
+
+ writel_relaxed(ch, port->membase + USART_DR);
+}
+
+static void stm32_console_write(struct console *co, const char *s, unsigned cnt)
+{
+ struct uart_port *port = &stm32_ports[co->index].port;
+ unsigned long flags;
+ u32 old_cr1, new_cr1;
+ int locked = 1;
+
+ local_irq_save(flags);
+ if (port->sysrq)
+ locked = 0;
+ else if (oops_in_progress)
+ locked = spin_trylock(&port->lock);
+ else
+ spin_lock(&port->lock);
+
+ /* Save and disable interrupts */
+ old_cr1 = readl_relaxed(port->membase + USART_CR1);
+ new_cr1 = old_cr1 & ~USART_CR1_IE_MASK;
+ writel_relaxed(new_cr1, port->membase + USART_CR1);
+
+ uart_console_write(port, s, cnt, stm32_console_putchar);
+
+ /* Restore interrupt state */
+ writel_relaxed(old_cr1, port->membase + USART_CR1);
+
+ if (locked)
+ spin_unlock(&port->lock);
+ local_irq_restore(flags);
+}
+
+static int stm32_console_setup(struct console *co, char *options)
+{
+ struct stm32_port *stm32port;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index >= STM32_MAX_PORTS)
+ return -ENODEV;
+
+ stm32port = &stm32_ports[co->index];
+
+ /*
+ * This driver does not support early console initialization
+ * (use ARM early printk support instead), so we only expect
+ * this to be called during the uart port registration when the
+ * driver gets probed and the port should be mapped at that point.
+ */
+ if (stm32port->port.mapbase == 0 || stm32port->port.membase == NULL)
+ return -ENXIO;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(&stm32port->port, co, baud, parity, bits, flow);
+}
+
+static struct console stm32_console = {
+ .name = STM32_SERIAL_NAME,
+ .device = uart_console_device,
+ .write = stm32_console_write,
+ .setup = stm32_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &stm32_usart_driver,
+};
+
+#define STM32_SERIAL_CONSOLE (&stm32_console)
+
+#else
+#define STM32_SERIAL_CONSOLE NULL
+#endif /* CONFIG_SERIAL_STM32_CONSOLE */
+
+static struct uart_driver stm32_usart_driver = {
+ .driver_name = DRIVER_NAME,
+ .dev_name = STM32_SERIAL_NAME,
+ .major = 0,
+ .minor = 0,
+ .nr = STM32_MAX_PORTS,
+ .cons = STM32_SERIAL_CONSOLE,
+};
+
+static struct platform_driver stm32_serial_driver = {
+ .probe = stm32_serial_probe,
+ .remove = stm32_serial_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = of_match_ptr(stm32_match),
+ },
+};
+
+static int __init usart_init(void)
+{
+ static char banner[] __initdata = "STM32 USART driver initialized";
+ int ret;
+
+ pr_info("%s\n", banner);
+
+ ret = uart_register_driver(&stm32_usart_driver);
+ if (ret)
+ return ret;
+
+ ret = platform_driver_register(&stm32_serial_driver);
+ if (ret)
+ uart_unregister_driver(&stm32_usart_driver);
+
+ return ret;
+}
+
+static void __exit usart_exit(void)
+{
+ platform_driver_unregister(&stm32_serial_driver);
+ uart_unregister_driver(&stm32_usart_driver);
+}
+
+module_init(usart_init);
+module_exit(usart_exit);
+
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_DESCRIPTION("STMicroelectronics STM32 serial port driver");
+MODULE_LICENSE("GPL v2");
diff --git a/kernel/drivers/tty/serial/suncore.c b/kernel/drivers/tty/serial/suncore.c
index 6e4ac8db2..127472bd6 100644
--- a/kernel/drivers/tty/serial/suncore.c
+++ b/kernel/drivers/tty/serial/suncore.c
@@ -10,7 +10,6 @@
* Copyright (C) 2002 David S. Miller (davem@redhat.com)
*/
-#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/console.h>
#include <linux/tty.h>
@@ -234,14 +233,10 @@ static int __init suncore_init(void)
{
return 0;
}
+device_initcall(suncore_init);
-static void __exit suncore_exit(void)
-{
-}
-
-module_init(suncore_init);
-module_exit(suncore_exit);
-
+#if 0 /* ..def MODULE ; never supported as such */
MODULE_AUTHOR("Eddie C. Dost, David S. Miller");
MODULE_DESCRIPTION("Sun serial common layer");
MODULE_LICENSE("GPL");
+#endif
diff --git a/kernel/drivers/tty/serial/sunhv.c b/kernel/drivers/tty/serial/sunhv.c
index 534754440..ca0d3802f 100644
--- a/kernel/drivers/tty/serial/sunhv.c
+++ b/kernel/drivers/tty/serial/sunhv.c
@@ -3,7 +3,6 @@
* Copyright (C) 2006, 2007 David S. Miller (davem@davemloft.net)
*/
-#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/tty.h>
@@ -149,8 +148,10 @@ static int receive_chars_read(struct uart_port *port)
uart_handle_dcd_change(port, 1);
}
- for (i = 0; i < bytes_read; i++)
- uart_handle_sysrq_char(port, con_read_page[i]);
+ if (port->sysrq != 0 && *con_read_page) {
+ for (i = 0; i < bytes_read; i++)
+ uart_handle_sysrq_char(port, con_read_page[i]);
+ }
if (port->state == NULL)
continue;
@@ -169,17 +170,17 @@ struct sunhv_ops {
int (*receive_chars)(struct uart_port *port);
};
-static struct sunhv_ops bychar_ops = {
+static const struct sunhv_ops bychar_ops = {
.transmit_chars = transmit_chars_putchar,
.receive_chars = receive_chars_getchar,
};
-static struct sunhv_ops bywrite_ops = {
+static const struct sunhv_ops bywrite_ops = {
.transmit_chars = transmit_chars_write,
.receive_chars = receive_chars_read,
};
-static struct sunhv_ops *sunhv_ops = &bychar_ops;
+static const struct sunhv_ops *sunhv_ops = &bychar_ops;
static struct tty_port *receive_chars(struct uart_port *port)
{
@@ -621,7 +622,6 @@ static const struct of_device_id hv_match[] = {
},
{},
};
-MODULE_DEVICE_TABLE(of, hv_match);
static struct platform_driver hv_driver = {
.driver = {
@@ -639,16 +639,11 @@ static int __init sunhv_init(void)
return platform_driver_register(&hv_driver);
}
+device_initcall(sunhv_init);
-static void __exit sunhv_exit(void)
-{
- platform_driver_unregister(&hv_driver);
-}
-
-module_init(sunhv_init);
-module_exit(sunhv_exit);
-
+#if 0 /* ...def MODULE ; never supported as such */
MODULE_AUTHOR("David S. Miller");
MODULE_DESCRIPTION("SUN4V Hypervisor console driver");
MODULE_VERSION("2.0");
MODULE_LICENSE("GPL");
+#endif
diff --git a/kernel/drivers/tty/serial/ucc_uart.c b/kernel/drivers/tty/serial/ucc_uart.c
index 7d2532b23..73190f5d2 100644
--- a/kernel/drivers/tty/serial/ucc_uart.c
+++ b/kernel/drivers/tty/serial/ucc_uart.c
@@ -950,7 +950,7 @@ static void qe_uart_set_termios(struct uart_port *port,
if ((termios->c_cflag & CREAD) == 0)
port->read_status_mask &= ~BD_SC_EMPTY;
- baud = uart_get_baud_rate(port, termios, old, 0, 115200);
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
/* Do we really need a spinlock here? */
spin_lock_irqsave(&port->lock, flags);
diff --git a/kernel/drivers/tty/serial/xilinx_uartps.c b/kernel/drivers/tty/serial/xilinx_uartps.c
index 3ddbac767..009e0dbc1 100644
--- a/kernel/drivers/tty/serial/xilinx_uartps.c
+++ b/kernel/drivers/tty/serial/xilinx_uartps.c
@@ -1075,7 +1075,8 @@ static void cdns_uart_console_putchar(struct uart_port *port, int ch)
writel(ch, port->membase + CDNS_UART_FIFO_OFFSET);
}
-static void cdns_early_write(struct console *con, const char *s, unsigned n)
+static void __init cdns_early_write(struct console *con, const char *s,
+ unsigned n)
{
struct earlycon_device *dev = con->data;